From e84e21be382224e28b7da581d5dd8d22f732732d Mon Sep 17 00:00:00 2001 From: Benjamin Leduc Date: Sat, 31 Aug 2013 18:48:28 +0200 Subject: [PATCH] New comit of SDL2 --- src/SDL2/Android.mk | 121 + src/SDL2/CHANGES.txt | 114 + src/SDL2/COPYING.txt | 20 + src/SDL2/IMG.c | 239 + src/SDL2/IMG_ImageIO.m | 803 + src/SDL2/IMG_UIImage.m | 440 + src/SDL2/IMG_bmp.c | 892 + src/SDL2/IMG_gif.c | 636 + src/SDL2/IMG_jpg.c | 495 + src/SDL2/IMG_lbm.c | 499 + src/SDL2/IMG_pcx.c | 276 + src/SDL2/IMG_png.c | 646 + src/SDL2/IMG_pnm.c | 258 + src/SDL2/IMG_tga.c | 340 + src/SDL2/IMG_tif.c | 298 + src/SDL2/IMG_webp.c | 317 + src/SDL2/IMG_xcf.c | 841 + src/SDL2/IMG_xpm.c | 1187 + src/SDL2/IMG_xv.c | 165 + src/SDL2/IMG_xxx.c | 87 + src/SDL2/Makefile.am | 78 + src/SDL2/Makefile.in | 998 + src/SDL2/README.txt | 40 + src/SDL2/SDL.h | 160 + src/SDL2/SDL2_image.pc.in | 12 + src/SDL2/SDL2_image.spec | 69 + src/SDL2/SDL2_image.spec.in | 69 + src/SDL2/SDL_assert.h | 237 + src/SDL2/SDL_atomic.h | 359 + src/SDL2/SDL_audio.h | 506 + src/SDL2/SDL_blendmode.h | 63 + src/SDL2/SDL_clipboard.h | 71 + src/SDL2/SDL_config.h | 51 + src/SDL2/SDL_config_macosx.h | 180 + src/SDL2/SDL_copying.h | 20 + src/SDL2/SDL_cpuinfo.h | 146 + src/SDL2/SDL_endian.h | 239 + src/SDL2/SDL_error.h | 76 + src/SDL2/SDL_events.h | 720 + src/SDL2/SDL_gamecontroller.h | 298 + src/SDL2/SDL_gesture.h | 87 + src/SDL2/SDL_haptic.h | 1225 + src/SDL2/SDL_hints.h | 339 + src/SDL2/SDL_image.h | 145 + src/SDL2/SDL_joystick.h | 253 + src/SDL2/SDL_keyboard.h | 217 + src/SDL2/SDL_keycode.h | 341 + src/SDL2/SDL_loadso.h | 81 + src/SDL2/SDL_log.h | 211 + src/SDL2/SDL_main.h | 125 + src/SDL2/SDL_messagebox.h | 144 + src/SDL2/SDL_mouse.h | 224 + src/SDL2/SDL_mutex.h | 251 + src/SDL2/SDL_name.h | 11 + src/SDL2/SDL_opengl.h | 11126 +++++++++ src/SDL2/SDL_opengles.h | 38 + src/SDL2/SDL_opengles2.h | 38 + src/SDL2/SDL_pixels.h | 427 + src/SDL2/SDL_platform.h | 151 + src/SDL2/SDL_power.h | 75 + src/SDL2/SDL_quit.h | 58 + src/SDL2/SDL_rect.h | 138 + src/SDL2/SDL_render.h | 845 + src/SDL2/SDL_revision.h | 2 + src/SDL2/SDL_rwops.h | 232 + src/SDL2/SDL_scancode.h | 401 + src/SDL2/SDL_shape.h | 143 + src/SDL2/SDL_stdinc.h | 392 + src/SDL2/SDL_surface.h | 503 + src/SDL2/SDL_system.h | 105 + src/SDL2/SDL_syswm.h | 237 + src/SDL2/SDL_thread.h | 240 + src/SDL2/SDL_timer.h | 104 + src/SDL2/SDL_touch.h | 86 + src/SDL2/SDL_types.h | 29 + src/SDL2/SDL_version.h | 162 + src/SDL2/SDL_video.h | 953 + src/SDL2/VisualC/SDL_image_VS2008.sln | 39 + src/SDL2/VisualC/SDL_image_VS2008.vcproj | 983 + src/SDL2/VisualC/SDL_image_VS2010.sln | 36 + src/SDL2/VisualC/SDL_image_VS2010.vcxproj | 398 + src/SDL2/VisualC/SDL_image_VS2012.sln | 36 + src/SDL2/VisualC/SDL_image_VS2012.vcxproj | 394 + src/SDL2/VisualC/Version.rc | 105 + src/SDL2/VisualC/clean.sh | 6 + src/SDL2/VisualC/external/include/jconfig.h | 54 + src/SDL2/VisualC/external/include/jerror.h | 304 + src/SDL2/VisualC/external/include/jmorecfg.h | 390 + src/SDL2/VisualC/external/include/jpeglib.h | 1173 + src/SDL2/VisualC/external/include/png.h | 3304 +++ src/SDL2/VisualC/external/include/pngconf.h | 616 + src/SDL2/VisualC/external/include/pnglibconf.h | 209 + src/SDL2/VisualC/external/include/tiff.h | 678 + src/SDL2/VisualC/external/include/tiffconf.h | 128 + src/SDL2/VisualC/external/include/tiffio.h | 557 + src/SDL2/VisualC/external/include/tiffvers.h | 9 + src/SDL2/VisualC/external/include/webp/decode.h | 488 + src/SDL2/VisualC/external/include/webp/encode.h | 485 + src/SDL2/VisualC/external/include/webp/types.h | 45 + src/SDL2/VisualC/external/include/zconf.h | 511 + src/SDL2/VisualC/external/include/zlib.h | 1768 ++ src/SDL2/VisualC/external/lib/x64/LICENSE.jpeg.txt | 65 + src/SDL2/VisualC/external/lib/x64/LICENSE.png.txt | 114 + src/SDL2/VisualC/external/lib/x64/LICENSE.tiff.txt | 25 + src/SDL2/VisualC/external/lib/x64/LICENSE.webp.txt | 34 + src/SDL2/VisualC/external/lib/x64/LICENSE.zlib.txt | 31 + src/SDL2/VisualC/external/lib/x64/libjpeg-9.dll | Bin 0 -> 243200 bytes src/SDL2/VisualC/external/lib/x64/libpng16-16.dll | Bin 0 -> 216064 bytes src/SDL2/VisualC/external/lib/x64/libtiff-5.dll | Bin 0 -> 451584 bytes src/SDL2/VisualC/external/lib/x64/libwebp-4.dll | Bin 0 -> 326656 bytes src/SDL2/VisualC/external/lib/x64/zlib1.dll | Bin 0 -> 133632 bytes src/SDL2/VisualC/external/lib/x86/LICENSE.jpeg.txt | 65 + src/SDL2/VisualC/external/lib/x86/LICENSE.png.txt | 114 + src/SDL2/VisualC/external/lib/x86/LICENSE.tiff.txt | 25 + src/SDL2/VisualC/external/lib/x86/LICENSE.webp.txt | 34 + src/SDL2/VisualC/external/lib/x86/LICENSE.zlib.txt | 31 + src/SDL2/VisualC/external/lib/x86/libjpeg-9.dll | Bin 0 -> 223232 bytes src/SDL2/VisualC/external/lib/x86/libpng16-16.dll | Bin 0 -> 200704 bytes src/SDL2/VisualC/external/lib/x86/libtiff-5.dll | Bin 0 -> 436224 bytes src/SDL2/VisualC/external/lib/x86/libwebp-4.dll | Bin 0 -> 271872 bytes src/SDL2/VisualC/external/lib/x86/zlib1.dll | Bin 0 -> 123904 bytes src/SDL2/VisualC/resource.h | 15 + src/SDL2/VisualC/showimage/showimage_VS2008.vcproj | 414 + .../VisualC/showimage/showimage_VS2010.vcxproj | 285 + .../VisualC/showimage/showimage_VS2012.vcxproj | 281 + src/SDL2/VisualCE/SDL_image.dsp | 164 + src/SDL2/VisualCE/SDL_image.dsw | 41 + src/SDL2/VisualCE/SDL_image.sln | 30 + src/SDL2/VisualCE/SDL_image.vcproj | 343 + src/SDL2/VisualCE/Version.rc | 106 + src/SDL2/VisualCE/clean.sh | 5 + src/SDL2/VisualCE/resource.h | 15 + src/SDL2/VisualCE/showimage/showimage.dsp | 106 + src/SDL2/VisualCE/showimage/showimage.sln | 20 + src/SDL2/VisualCE/showimage/showimage.vcproj | 68 + .../Xcode-iOS/SDL_image.xcodeproj/project.pbxproj | 316 + .../webp.framework/Headers/webp/decode.h | 488 + .../webp.framework/Headers/webp/encode.h | 485 + .../Frameworks/webp.framework/Headers/webp/types.h | 45 + .../Frameworks/webp.framework/LICENSE.webp.txt | 34 + .../Resources/English.lproj/InfoPlist.strings | Bin 0 -> 492 bytes .../Frameworks/webp.framework/Resources/Info.plist | 24 + .../Versions/A/Headers/webp/decode.h | 488 + .../Versions/A/Headers/webp/encode.h | 485 + .../webp.framework/Versions/A/Headers/webp/types.h | 45 + .../A/Resources/English.lproj/InfoPlist.strings | Bin 0 -> 492 bytes .../webp.framework/Versions/A/Resources/Info.plist | 24 + .../Frameworks/webp.framework/Versions/A/webp | Bin 0 -> 730072 bytes .../Versions/Current/Headers/webp/decode.h | 488 + .../Versions/Current/Headers/webp/encode.h | 485 + .../Versions/Current/Headers/webp/types.h | 45 + .../Resources/English.lproj/InfoPlist.strings | Bin 0 -> 492 bytes .../Versions/Current/Resources/Info.plist | 24 + .../webp.framework/Versions/Current/webp | Bin 0 -> 730072 bytes src/SDL2/Xcode/Frameworks/webp.framework/webp | Bin 0 -> 730072 bytes src/SDL2/Xcode/Info-Framework.plist | 22 + src/SDL2/Xcode/SDL_image.xcodeproj/project.pbxproj | 753 + src/SDL2/Xcode/package | 272 + src/SDL2/Xcode/pkg-support/SDL_image.info | 15 + src/SDL2/Xcode/pkg-support/codesign-frameworks.sh | 43 + src/SDL2/Xcode/pkg-support/mkpackage.sh | 27 + src/SDL2/Xcode/pkg-support/resources/ReadMe.txt | 26 + src/SDL2/Xcode/pkg-support/resources/Welcome.txt | 3 + .../showimage/English.lproj/InfoPlist.strings | Bin 0 -> 532 bytes .../showimage/Info-showimage__Upgraded_.plist | 24 + src/SDL2/Xcode/showimage/SDLMain.h | 16 + src/SDL2/Xcode/showimage/SDLMain.m | 383 + .../showimage/showimage.xcodeproj/project.pbxproj | 340 + src/SDL2/acinclude/libtool.m4 | 7370 ++++++ src/SDL2/acinclude/ltoptions.m4 | 370 + src/SDL2/acinclude/ltsugar.m4 | 125 + src/SDL2/acinclude/ltversion.m4 | 25 + src/SDL2/acinclude/lt~obsolete.m4 | 93 + src/SDL2/acinclude/pkg.m4 | 157 + src/SDL2/acinclude/sdl2.m4 | 202 + src/SDL2/aclocal.m4 | 1107 + src/SDL2/autogen.sh | 8 + src/SDL2/begin_code.h | 150 + src/SDL2/close_code.h | 37 + src/SDL2/config.guess | 1494 ++ src/SDL2/config.sub | 1700 ++ src/SDL2/configure | 15512 +++++++++++++ src/SDL2/configure.in | 371 + src/SDL2/debian/changelog | 321 + src/SDL2/debian/compat | 1 + src/SDL2/debian/control | 47 + src/SDL2/debian/copyright | 47 + src/SDL2/debian/docs | 1 + src/SDL2/debian/examples/Makefile | 14 + src/SDL2/debian/libsdl2-image-dev.examples | 2 + src/SDL2/debian/libsdl2-image-dev.install | 4 + src/SDL2/debian/libsdl2-image.install | 1 + src/SDL2/debian/libsdl2-image.lintian-overrides | 1 + src/SDL2/debian/rules | 18 + src/SDL2/debian/source/format | 1 + src/SDL2/debian/source/lintian-overrides | 1 + src/SDL2/debian/watch | 2 + src/SDL2/depcomp | 584 + src/SDL2/external/jpeg-9/Android.mk | 37 + src/SDL2/external/jpeg-9/Makefile.am | 134 + src/SDL2/external/jpeg-9/Makefile.in | 995 + src/SDL2/external/jpeg-9/README | 350 + src/SDL2/external/jpeg-9/aclocal.m4 | 9683 ++++++++ src/SDL2/external/jpeg-9/ar-lib | 270 + src/SDL2/external/jpeg-9/cderror.h | 134 + src/SDL2/external/jpeg-9/cdjpeg.c | 181 + src/SDL2/external/jpeg-9/cdjpeg.h | 187 + src/SDL2/external/jpeg-9/change.log | 382 + src/SDL2/external/jpeg-9/cjpeg.1 | 366 + src/SDL2/external/jpeg-9/cjpeg.c | 652 + src/SDL2/external/jpeg-9/ckconfig.c | 402 + src/SDL2/external/jpeg-9/coderules.txt | 118 + src/SDL2/external/jpeg-9/config.guess | 1535 ++ src/SDL2/external/jpeg-9/config.sub | 1790 ++ src/SDL2/external/jpeg-9/configure | 15346 +++++++++++++ src/SDL2/external/jpeg-9/configure.ac | 365 + src/SDL2/external/jpeg-9/depcomp | 790 + src/SDL2/external/jpeg-9/djpeg.1 | 252 + src/SDL2/external/jpeg-9/djpeg.c | 617 + src/SDL2/external/jpeg-9/example.c | 433 + src/SDL2/external/jpeg-9/filelist.txt | 214 + src/SDL2/external/jpeg-9/install-sh | 527 + src/SDL2/external/jpeg-9/install.txt | 1096 + src/SDL2/external/jpeg-9/jaricom.c | 153 + src/SDL2/external/jpeg-9/jcapimin.c | 288 + src/SDL2/external/jpeg-9/jcapistd.c | 161 + src/SDL2/external/jpeg-9/jcarith.c | 943 + src/SDL2/external/jpeg-9/jccoefct.c | 454 + src/SDL2/external/jpeg-9/jccolor.c | 541 + src/SDL2/external/jpeg-9/jcdctmgr.c | 482 + src/SDL2/external/jpeg-9/jchuff.c | 1576 ++ src/SDL2/external/jpeg-9/jcinit.c | 65 + src/SDL2/external/jpeg-9/jcmainct.c | 297 + src/SDL2/external/jpeg-9/jcmarker.c | 719 + src/SDL2/external/jpeg-9/jcmaster.c | 858 + src/SDL2/external/jpeg-9/jcomapi.c | 106 + src/SDL2/external/jpeg-9/jconfig.bcc | 48 + src/SDL2/external/jpeg-9/jconfig.cfg | 53 + src/SDL2/external/jpeg-9/jconfig.dj | 38 + src/SDL2/external/jpeg-9/jconfig.h | 156 + src/SDL2/external/jpeg-9/jconfig.mac | 43 + src/SDL2/external/jpeg-9/jconfig.manx | 43 + src/SDL2/external/jpeg-9/jconfig.mc6 | 52 + src/SDL2/external/jpeg-9/jconfig.sas | 43 + src/SDL2/external/jpeg-9/jconfig.st | 42 + src/SDL2/external/jpeg-9/jconfig.txt | 164 + src/SDL2/external/jpeg-9/jconfig.vc | 45 + src/SDL2/external/jpeg-9/jconfig.vms | 37 + src/SDL2/external/jpeg-9/jconfig.wat | 38 + src/SDL2/external/jpeg-9/jcparam.c | 637 + src/SDL2/external/jpeg-9/jcprepct.c | 358 + src/SDL2/external/jpeg-9/jcsample.c | 545 + src/SDL2/external/jpeg-9/jctrans.c | 385 + src/SDL2/external/jpeg-9/jdapimin.c | 396 + src/SDL2/external/jpeg-9/jdapistd.c | 275 + src/SDL2/external/jpeg-9/jdarith.c | 782 + src/SDL2/external/jpeg-9/jdatadst.c | 270 + src/SDL2/external/jpeg-9/jdatasrc.c | 275 + src/SDL2/external/jpeg-9/jdcoefct.c | 741 + src/SDL2/external/jpeg-9/jdcolor.c | 618 + src/SDL2/external/jpeg-9/jdct.h | 393 + src/SDL2/external/jpeg-9/jddctmgr.c | 384 + src/SDL2/external/jpeg-9/jdhuff.c | 1542 ++ src/SDL2/external/jpeg-9/jdinput.c | 661 + src/SDL2/external/jpeg-9/jdmainct.c | 513 + src/SDL2/external/jpeg-9/jdmarker.c | 1505 ++ src/SDL2/external/jpeg-9/jdmaster.c | 531 + src/SDL2/external/jpeg-9/jdmerge.c | 400 + src/SDL2/external/jpeg-9/jdpostct.c | 290 + src/SDL2/external/jpeg-9/jdsample.c | 361 + src/SDL2/external/jpeg-9/jdtrans.c | 140 + src/SDL2/external/jpeg-9/jerror.c | 253 + src/SDL2/external/jpeg-9/jerror.h | 304 + src/SDL2/external/jpeg-9/jfdctflt.c | 174 + src/SDL2/external/jpeg-9/jfdctfst.c | 230 + src/SDL2/external/jpeg-9/jfdctint.c | 4348 ++++ src/SDL2/external/jpeg-9/jidctflt.c | 235 + src/SDL2/external/jpeg-9/jidctfst.S | 476 + src/SDL2/external/jpeg-9/jidctfst.c | 368 + src/SDL2/external/jpeg-9/jidctint.c | 5137 +++++ src/SDL2/external/jpeg-9/jinclude.h | 91 + src/SDL2/external/jpeg-9/jmem-android.c | 186 + src/SDL2/external/jpeg-9/jmemansi.c | 167 + src/SDL2/external/jpeg-9/jmemdos.c | 638 + src/SDL2/external/jpeg-9/jmemdosa.asm | 379 + src/SDL2/external/jpeg-9/jmemmac.c | 289 + src/SDL2/external/jpeg-9/jmemmgr.c | 1119 + src/SDL2/external/jpeg-9/jmemname.c | 276 + src/SDL2/external/jpeg-9/jmemnobs.c | 109 + src/SDL2/external/jpeg-9/jmemsys.h | 198 + src/SDL2/external/jpeg-9/jmorecfg.h | 390 + src/SDL2/external/jpeg-9/jpegint.h | 426 + src/SDL2/external/jpeg-9/jpeglib.h | 1173 + src/SDL2/external/jpeg-9/jpegtran.1 | 285 + src/SDL2/external/jpeg-9/jpegtran.c | 560 + src/SDL2/external/jpeg-9/jquant1.c | 857 + src/SDL2/external/jpeg-9/jquant2.c | 1311 ++ src/SDL2/external/jpeg-9/jutils.c | 227 + src/SDL2/external/jpeg-9/jversion.h | 14 + src/SDL2/external/jpeg-9/libjpeg.map | 4 + src/SDL2/external/jpeg-9/libjpeg.txt | 3098 +++ src/SDL2/external/jpeg-9/ltmain.sh | 9655 ++++++++ src/SDL2/external/jpeg-9/makcjpeg.st | 36 + src/SDL2/external/jpeg-9/makdjpeg.st | 36 + src/SDL2/external/jpeg-9/makeadsw.vc6 | 77 + src/SDL2/external/jpeg-9/makeasln.v10 | 33 + src/SDL2/external/jpeg-9/makecdep.vc6 | 82 + src/SDL2/external/jpeg-9/makecdsp.vc6 | 130 + src/SDL2/external/jpeg-9/makecfil.v10 | 69 + src/SDL2/external/jpeg-9/makecmak.vc6 | 159 + src/SDL2/external/jpeg-9/makecvcx.v10 | 76 + src/SDL2/external/jpeg-9/makeddep.vc6 | 82 + src/SDL2/external/jpeg-9/makeddsp.vc6 | 130 + src/SDL2/external/jpeg-9/makedfil.v10 | 69 + src/SDL2/external/jpeg-9/makedmak.vc6 | 159 + src/SDL2/external/jpeg-9/makedvcx.v10 | 76 + src/SDL2/external/jpeg-9/makefile.ansi | 221 + src/SDL2/external/jpeg-9/makefile.bcc | 292 + src/SDL2/external/jpeg-9/makefile.dj | 227 + src/SDL2/external/jpeg-9/makefile.manx | 221 + src/SDL2/external/jpeg-9/makefile.mc6 | 256 + src/SDL2/external/jpeg-9/makefile.mms | 225 + src/SDL2/external/jpeg-9/makefile.sas | 259 + src/SDL2/external/jpeg-9/makefile.unix | 235 + src/SDL2/external/jpeg-9/makefile.vc | 273 + src/SDL2/external/jpeg-9/makefile.vms | 142 + src/SDL2/external/jpeg-9/makefile.wat | 240 + src/SDL2/external/jpeg-9/makejdep.vc6 | 423 + src/SDL2/external/jpeg-9/makejdsp.vc6 | 285 + src/SDL2/external/jpeg-9/makejdsw.vc6 | 29 + src/SDL2/external/jpeg-9/makejfil.v10 | 186 + src/SDL2/external/jpeg-9/makejmak.vc6 | 425 + src/SDL2/external/jpeg-9/makejsln.v10 | 17 + src/SDL2/external/jpeg-9/makejvcx.v10 | 112 + src/SDL2/external/jpeg-9/makeproj.mac | 213 + src/SDL2/external/jpeg-9/makerdep.vc6 | 6 + src/SDL2/external/jpeg-9/makerdsp.vc6 | 78 + src/SDL2/external/jpeg-9/makerfil.v10 | 30 + src/SDL2/external/jpeg-9/makermak.vc6 | 110 + src/SDL2/external/jpeg-9/makervcx.v10 | 62 + src/SDL2/external/jpeg-9/maketdep.vc6 | 43 + src/SDL2/external/jpeg-9/maketdsp.vc6 | 122 + src/SDL2/external/jpeg-9/maketfil.v10 | 63 + src/SDL2/external/jpeg-9/maketmak.vc6 | 131 + src/SDL2/external/jpeg-9/maketvcx.v10 | 74 + src/SDL2/external/jpeg-9/makewdep.vc6 | 6 + src/SDL2/external/jpeg-9/makewdsp.vc6 | 78 + src/SDL2/external/jpeg-9/makewfil.v10 | 30 + src/SDL2/external/jpeg-9/makewmak.vc6 | 110 + src/SDL2/external/jpeg-9/makewvcx.v10 | 62 + src/SDL2/external/jpeg-9/makljpeg.st | 68 + src/SDL2/external/jpeg-9/maktjpeg.st | 30 + src/SDL2/external/jpeg-9/makvms.opt | 4 + src/SDL2/external/jpeg-9/missing | 215 + src/SDL2/external/jpeg-9/rdbmp.c | 480 + src/SDL2/external/jpeg-9/rdcolmap.c | 253 + src/SDL2/external/jpeg-9/rdgif.c | 38 + src/SDL2/external/jpeg-9/rdjpgcom.1 | 63 + src/SDL2/external/jpeg-9/rdjpgcom.c | 515 + src/SDL2/external/jpeg-9/rdppm.c | 459 + src/SDL2/external/jpeg-9/rdrle.c | 387 + src/SDL2/external/jpeg-9/rdswitch.c | 365 + src/SDL2/external/jpeg-9/rdtarga.c | 500 + src/SDL2/external/jpeg-9/structure.txt | 941 + src/SDL2/external/jpeg-9/testimg.bmp | Bin 0 -> 35050 bytes src/SDL2/external/jpeg-9/testimg.jpg | Bin 0 -> 5764 bytes src/SDL2/external/jpeg-9/testimg.ppm | 4 + src/SDL2/external/jpeg-9/testimgp.jpg | Bin 0 -> 5645 bytes src/SDL2/external/jpeg-9/testorig.jpg | Bin 0 -> 5770 bytes src/SDL2/external/jpeg-9/testprog.jpg | Bin 0 -> 5655 bytes src/SDL2/external/jpeg-9/transupp.c | 1597 ++ src/SDL2/external/jpeg-9/transupp.h | 213 + src/SDL2/external/jpeg-9/usage.txt | 650 + src/SDL2/external/jpeg-9/wizard.txt | 211 + src/SDL2/external/jpeg-9/wrbmp.c | 442 + src/SDL2/external/jpeg-9/wrgif.c | 399 + src/SDL2/external/jpeg-9/wrjpgcom.1 | 103 + src/SDL2/external/jpeg-9/wrjpgcom.c | 583 + src/SDL2/external/jpeg-9/wrppm.c | 269 + src/SDL2/external/jpeg-9/wrrle.c | 305 + src/SDL2/external/jpeg-9/wrtarga.c | 253 + src/SDL2/external/libpng-1.6.2/ANNOUNCE | 49 + src/SDL2/external/libpng-1.6.2/Android.mk | 28 + src/SDL2/external/libpng-1.6.2/CHANGES | 4516 ++++ src/SDL2/external/libpng-1.6.2/CMakeLists.txt | 383 + src/SDL2/external/libpng-1.6.2/INSTALL | 170 + src/SDL2/external/libpng-1.6.2/LICENSE | 111 + src/SDL2/external/libpng-1.6.2/Makefile.am | 295 + src/SDL2/external/libpng-1.6.2/Makefile.in | 2059 ++ src/SDL2/external/libpng-1.6.2/README | 202 + src/SDL2/external/libpng-1.6.2/TODO | 27 + src/SDL2/external/libpng-1.6.2/aclocal.m4 | 1062 + src/SDL2/external/libpng-1.6.2/arm/arm_init.c | 219 + src/SDL2/external/libpng-1.6.2/arm/filter_neon.S | 235 + src/SDL2/external/libpng-1.6.2/autogen.sh | 219 + src/SDL2/external/libpng-1.6.2/config.guess | 1537 ++ src/SDL2/external/libpng-1.6.2/config.h.in | 112 + src/SDL2/external/libpng-1.6.2/config.sub | 1793 ++ src/SDL2/external/libpng-1.6.2/configure | 15176 +++++++++++++ src/SDL2/external/libpng-1.6.2/configure.ac | 266 + src/SDL2/external/libpng-1.6.2/contrib/README.txt | 4 + .../libpng-1.6.2/contrib/examples/README.txt | 24 + .../libpng-1.6.2/contrib/examples/iccfrompng.c | 180 + .../libpng-1.6.2/contrib/examples/pngpixel.c | 368 + .../libpng-1.6.2/contrib/examples/pngtopng.c | 92 + .../external/libpng-1.6.2/contrib/gregbook/COPYING | 340 + .../external/libpng-1.6.2/contrib/gregbook/LICENSE | 50 + .../libpng-1.6.2/contrib/gregbook/Makefile.mingw32 | 130 + .../libpng-1.6.2/contrib/gregbook/Makefile.sgi | 104 + .../libpng-1.6.2/contrib/gregbook/Makefile.unx | 132 + .../libpng-1.6.2/contrib/gregbook/Makefile.w32 | 113 + .../external/libpng-1.6.2/contrib/gregbook/README | 186 + .../libpng-1.6.2/contrib/gregbook/makevms.com | 132 + .../libpng-1.6.2/contrib/gregbook/readpng.c | 316 + .../libpng-1.6.2/contrib/gregbook/readpng.h | 88 + .../libpng-1.6.2/contrib/gregbook/readpng2.c | 505 + .../libpng-1.6.2/contrib/gregbook/readpng2.h | 116 + .../libpng-1.6.2/contrib/gregbook/readppm.c | 179 + .../libpng-1.6.2/contrib/gregbook/rpng-win.c | 728 + .../libpng-1.6.2/contrib/gregbook/rpng-x.c | 904 + .../libpng-1.6.2/contrib/gregbook/rpng2-win.c | 1253 + .../libpng-1.6.2/contrib/gregbook/rpng2-x.c | 2107 ++ .../libpng-1.6.2/contrib/gregbook/toucan.png | Bin 0 -> 12901 bytes .../external/libpng-1.6.2/contrib/gregbook/wpng.c | 853 + .../libpng-1.6.2/contrib/gregbook/writepng.c | 401 + .../libpng-1.6.2/contrib/gregbook/writepng.h | 133 + .../libpng-1.6.2/contrib/libtests/fakepng.c | 57 + .../libpng-1.6.2/contrib/libtests/gentests.sh | 102 + .../libpng-1.6.2/contrib/libtests/makepng.c | 1486 ++ .../libpng-1.6.2/contrib/libtests/pngstest.c | 3742 +++ .../libpng-1.6.2/contrib/libtests/pngunknown.c | 1066 + .../libpng-1.6.2/contrib/libtests/pngvalid.c | 10145 +++++++++ .../libpng-1.6.2/contrib/libtests/readpng.c | 104 + .../libpng-1.6.2/contrib/libtests/tarith.c | 999 + .../libpng-1.6.2/contrib/libtests/timepng.c | 303 + .../external/libpng-1.6.2/contrib/pngminim/README | 5 + .../libpng-1.6.2/contrib/pngminim/decoder/README | 10 + .../libpng-1.6.2/contrib/pngminim/decoder/makefile | 150 + .../contrib/pngminim/decoder/pngusr.dfa | 40 + .../libpng-1.6.2/contrib/pngminim/decoder/pngusr.h | 24 + .../libpng-1.6.2/contrib/pngminim/encoder/README | 10 + .../libpng-1.6.2/contrib/pngminim/encoder/makefile | 149 + .../contrib/pngminim/encoder/pngusr.dfa | 35 + .../libpng-1.6.2/contrib/pngminim/encoder/pngusr.h | 24 + .../libpng-1.6.2/contrib/pngminim/preader/README | 15 + .../libpng-1.6.2/contrib/pngminim/preader/makefile | 165 + .../contrib/pngminim/preader/pngusr.dfa | 40 + .../libpng-1.6.2/contrib/pngminim/preader/pngusr.h | 24 + .../external/libpng-1.6.2/contrib/pngminus/README | 153 + .../libpng-1.6.2/contrib/pngminus/makefile.std | 65 + .../libpng-1.6.2/contrib/pngminus/makefile.tc3 | 38 + .../libpng-1.6.2/contrib/pngminus/makevms.com | 92 + .../libpng-1.6.2/contrib/pngminus/png2pnm.bat | 41 + .../libpng-1.6.2/contrib/pngminus/png2pnm.c | 431 + .../libpng-1.6.2/contrib/pngminus/png2pnm.sh | 42 + .../libpng-1.6.2/contrib/pngminus/pngminus.bat | 4 + .../libpng-1.6.2/contrib/pngminus/pngminus.sh | 5 + .../libpng-1.6.2/contrib/pngminus/pnm2png.bat | 41 + .../libpng-1.6.2/contrib/pngminus/pnm2png.c | 549 + .../libpng-1.6.2/contrib/pngminus/pnm2png.sh | 42 + .../external/libpng-1.6.2/contrib/pngsuite/README | 105 + .../libpng-1.6.2/contrib/pngsuite/basn0g01.png | Bin 0 -> 164 bytes .../libpng-1.6.2/contrib/pngsuite/basn0g02.png | Bin 0 -> 104 bytes .../libpng-1.6.2/contrib/pngsuite/basn0g04.png | Bin 0 -> 145 bytes .../libpng-1.6.2/contrib/pngsuite/basn0g08.png | Bin 0 -> 138 bytes .../libpng-1.6.2/contrib/pngsuite/basn0g16.png | Bin 0 -> 167 bytes .../libpng-1.6.2/contrib/pngsuite/basn2c08.png | Bin 0 -> 145 bytes .../libpng-1.6.2/contrib/pngsuite/basn2c16.png | Bin 0 -> 302 bytes .../libpng-1.6.2/contrib/pngsuite/basn3p01.png | Bin 0 -> 112 bytes .../libpng-1.6.2/contrib/pngsuite/basn3p02.png | Bin 0 -> 146 bytes .../libpng-1.6.2/contrib/pngsuite/basn3p04.png | Bin 0 -> 216 bytes .../libpng-1.6.2/contrib/pngsuite/basn3p08.png | Bin 0 -> 1286 bytes .../libpng-1.6.2/contrib/pngsuite/basn4a08.png | Bin 0 -> 126 bytes .../libpng-1.6.2/contrib/pngsuite/basn4a16.png | Bin 0 -> 2206 bytes .../libpng-1.6.2/contrib/pngsuite/basn6a08.png | Bin 0 -> 184 bytes .../libpng-1.6.2/contrib/pngsuite/basn6a16.png | Bin 0 -> 3435 bytes .../libpng-1.6.2/contrib/pngsuite/ftbbn0g01.png | Bin 0 -> 176 bytes .../libpng-1.6.2/contrib/pngsuite/ftbbn0g02.png | Bin 0 -> 197 bytes .../libpng-1.6.2/contrib/pngsuite/ftbbn0g04.png | Bin 0 -> 429 bytes .../libpng-1.6.2/contrib/pngsuite/ftbbn2c16.png | Bin 0 -> 2041 bytes .../libpng-1.6.2/contrib/pngsuite/ftbbn3p08.png | Bin 0 -> 1499 bytes .../libpng-1.6.2/contrib/pngsuite/ftbgn2c16.png | Bin 0 -> 2041 bytes .../libpng-1.6.2/contrib/pngsuite/ftbgn3p08.png | Bin 0 -> 1499 bytes .../libpng-1.6.2/contrib/pngsuite/ftbrn2c08.png | Bin 0 -> 1633 bytes .../libpng-1.6.2/contrib/pngsuite/ftbwn0g16.png | Bin 0 -> 1313 bytes .../libpng-1.6.2/contrib/pngsuite/ftbwn3p08.png | Bin 0 -> 1496 bytes .../libpng-1.6.2/contrib/pngsuite/ftbyn3p08.png | Bin 0 -> 1499 bytes .../libpng-1.6.2/contrib/pngsuite/ftp0n0g08.png | Bin 0 -> 719 bytes .../libpng-1.6.2/contrib/pngsuite/ftp0n2c08.png | Bin 0 -> 1594 bytes .../libpng-1.6.2/contrib/pngsuite/ftp0n3p08.png | Bin 0 -> 1476 bytes .../libpng-1.6.2/contrib/pngsuite/ftp1n3p08.png | Bin 0 -> 1483 bytes .../external/libpng-1.6.2/contrib/tools/README.txt | 26 + .../libpng-1.6.2/contrib/tools/checksum-icc.c | 102 + .../external/libpng-1.6.2/contrib/tools/chkfmt | 137 + .../external/libpng-1.6.2/contrib/tools/cvtcolor.c | 188 + .../external/libpng-1.6.2/contrib/tools/fixitxt.c | 144 + .../libpng-1.6.2/contrib/tools/intgamma.sh | 110 + .../external/libpng-1.6.2/contrib/tools/makesRGB.c | 430 + .../external/libpng-1.6.2/contrib/tools/sRGB.h | 48 + .../libpng-1.6.2/contrib/visupng/PngFile.c | 451 + .../libpng-1.6.2/contrib/visupng/PngFile.h | 30 + .../libpng-1.6.2/contrib/visupng/README.txt | 61 + .../libpng-1.6.2/contrib/visupng/VisualPng.c | 970 + .../libpng-1.6.2/contrib/visupng/VisualPng.dsp | 147 + .../libpng-1.6.2/contrib/visupng/VisualPng.dsw | 29 + .../libpng-1.6.2/contrib/visupng/VisualPng.ico | Bin 0 -> 766 bytes .../libpng-1.6.2/contrib/visupng/VisualPng.png | Bin 0 -> 208 bytes .../libpng-1.6.2/contrib/visupng/VisualPng.rc | 152 + .../libpng-1.6.2/contrib/visupng/cexcept.h | 248 + .../libpng-1.6.2/contrib/visupng/resource.h | 23 + src/SDL2/external/libpng-1.6.2/depcomp | 790 + src/SDL2/external/libpng-1.6.2/example.c | 1061 + src/SDL2/external/libpng-1.6.2/install-sh | 527 + src/SDL2/external/libpng-1.6.2/libpng-config.in | 127 + src/SDL2/external/libpng-1.6.2/libpng-manual.txt | 5220 +++++ src/SDL2/external/libpng-1.6.2/libpng.3 | 6074 +++++ src/SDL2/external/libpng-1.6.2/libpng.pc.in | 11 + src/SDL2/external/libpng-1.6.2/libpngpf.3 | 18 + src/SDL2/external/libpng-1.6.2/ltmain.sh | 9655 ++++++++ src/SDL2/external/libpng-1.6.2/missing | 215 + src/SDL2/external/libpng-1.6.2/png.5 | 74 + src/SDL2/external/libpng-1.6.2/png.c | 4298 ++++ src/SDL2/external/libpng-1.6.2/png.h | 3304 +++ src/SDL2/external/libpng-1.6.2/pngbar.jpg | Bin 0 -> 2498 bytes src/SDL2/external/libpng-1.6.2/pngbar.png | Bin 0 -> 2399 bytes src/SDL2/external/libpng-1.6.2/pngconf.h | 616 + src/SDL2/external/libpng-1.6.2/pngdebug.h | 157 + src/SDL2/external/libpng-1.6.2/pngerror.c | 932 + src/SDL2/external/libpng-1.6.2/pngget.c | 1177 + src/SDL2/external/libpng-1.6.2/pnginfo.h | 260 + src/SDL2/external/libpng-1.6.2/pnglibconf.h | 211 + src/SDL2/external/libpng-1.6.2/pngmem.c | 277 + src/SDL2/external/libpng-1.6.2/pngnow.png | Bin 0 -> 2069 bytes src/SDL2/external/libpng-1.6.2/pngpread.c | 1291 ++ src/SDL2/external/libpng-1.6.2/pngpriv.h | 1913 ++ src/SDL2/external/libpng-1.6.2/pngread.c | 4000 ++++ src/SDL2/external/libpng-1.6.2/pngrio.c | 118 + src/SDL2/external/libpng-1.6.2/pngrtran.c | 5101 +++++ src/SDL2/external/libpng-1.6.2/pngrutil.c | 4462 ++++ src/SDL2/external/libpng-1.6.2/pngset.c | 1606 ++ src/SDL2/external/libpng-1.6.2/pngstruct.h | 489 + src/SDL2/external/libpng-1.6.2/pngtest.c | 1971 ++ src/SDL2/external/libpng-1.6.2/pngtest.png | Bin 0 -> 8695 bytes src/SDL2/external/libpng-1.6.2/pngtrans.c | 841 + src/SDL2/external/libpng-1.6.2/pngusr.dfa | 14 + src/SDL2/external/libpng-1.6.2/pngwio.c | 164 + src/SDL2/external/libpng-1.6.2/pngwrite.c | 2331 ++ src/SDL2/external/libpng-1.6.2/pngwtran.c | 637 + src/SDL2/external/libpng-1.6.2/pngwutil.c | 3023 +++ .../libpng-1.6.2/projects/owatcom/libpng.tgt | 383 + .../libpng-1.6.2/projects/owatcom/libpng.wpj | 112 + .../libpng-1.6.2/projects/owatcom/pngconfig.mak | 160 + .../libpng-1.6.2/projects/owatcom/pngstest.tgt | 219 + .../libpng-1.6.2/projects/owatcom/pngtest.tgt | 179 + .../libpng-1.6.2/projects/owatcom/pngvalid.tgt | 210 + .../libpng-1.6.2/projects/visualc71/PRJ0041.mak | 21 + .../libpng-1.6.2/projects/visualc71/README.txt | 58 + .../projects/visualc71/README_zlib.txt | 44 + .../libpng-1.6.2/projects/visualc71/libpng.sln | 60 + .../libpng-1.6.2/projects/visualc71/libpng.vcproj | 419 + .../libpng-1.6.2/projects/visualc71/pngtest.vcproj | 267 + .../libpng-1.6.2/projects/visualc71/zlib.vcproj | 391 + .../external/libpng-1.6.2/projects/vstudio/WARNING | 27 + .../projects/vstudio/libpng/libpng.vcxproj | 234 + .../projects/vstudio/pnglibconf/pnglibconf.vcxproj | 61 + .../projects/vstudio/pngstest/pngstest.vcxproj | 219 + .../projects/vstudio/pngtest/pngtest.vcxproj | 220 + .../projects/vstudio/pngunknown/pngunknown.vcxproj | 219 + .../projects/vstudio/pngvalid/pngvalid.vcxproj | 219 + .../libpng-1.6.2/projects/vstudio/readme.txt | 65 + .../libpng-1.6.2/projects/vstudio/vstudio.sln | 109 + .../libpng-1.6.2/projects/vstudio/zlib.props | 45 + .../projects/vstudio/zlib/zlib.vcxproj | 169 + src/SDL2/external/libpng-1.6.2/scripts/README.txt | 86 + .../external/libpng-1.6.2/scripts/SCOPTIONS.ppc | 7 + .../external/libpng-1.6.2/scripts/checksym.awk | 173 + src/SDL2/external/libpng-1.6.2/scripts/def.dfn | 29 + src/SDL2/external/libpng-1.6.2/scripts/descrip.mms | 52 + src/SDL2/external/libpng-1.6.2/scripts/dfn.awk | 203 + .../external/libpng-1.6.2/scripts/intprefix.dfn | 19 + .../libpng-1.6.2/scripts/libpng-config-body.in | 96 + .../libpng-1.6.2/scripts/libpng-config-head.in | 24 + .../external/libpng-1.6.2/scripts/libpng.pc.in | 10 + src/SDL2/external/libpng-1.6.2/scripts/libtool.m4 | 7982 +++++++ .../external/libpng-1.6.2/scripts/ltoptions.m4 | 384 + src/SDL2/external/libpng-1.6.2/scripts/ltsugar.m4 | 123 + .../external/libpng-1.6.2/scripts/ltversion.m4 | 23 + .../external/libpng-1.6.2/scripts/lt~obsolete.m4 | 98 + src/SDL2/external/libpng-1.6.2/scripts/macro.lst | 3 + .../external/libpng-1.6.2/scripts/makefile.32sunu | 241 + .../external/libpng-1.6.2/scripts/makefile.64sunu | 241 + .../external/libpng-1.6.2/scripts/makefile.acorn | 57 + .../external/libpng-1.6.2/scripts/makefile.aix | 121 + .../external/libpng-1.6.2/scripts/makefile.amiga | 56 + .../external/libpng-1.6.2/scripts/makefile.atari | 63 + .../external/libpng-1.6.2/scripts/makefile.bc32 | 151 + .../external/libpng-1.6.2/scripts/makefile.beos | 215 + .../external/libpng-1.6.2/scripts/makefile.bor | 161 + .../external/libpng-1.6.2/scripts/makefile.cegcc | 116 + .../external/libpng-1.6.2/scripts/makefile.darwin | 218 + .../external/libpng-1.6.2/scripts/makefile.dec | 202 + .../external/libpng-1.6.2/scripts/makefile.dj2 | 62 + .../external/libpng-1.6.2/scripts/makefile.elf | 263 + .../external/libpng-1.6.2/scripts/makefile.freebsd | 61 + .../external/libpng-1.6.2/scripts/makefile.gcc | 87 + .../external/libpng-1.6.2/scripts/makefile.hp64 | 224 + .../external/libpng-1.6.2/scripts/makefile.hpgcc | 230 + .../external/libpng-1.6.2/scripts/makefile.hpux | 221 + .../external/libpng-1.6.2/scripts/makefile.ibmc | 82 + .../external/libpng-1.6.2/scripts/makefile.intel | 110 + .../external/libpng-1.6.2/scripts/makefile.knr | 109 + .../external/libpng-1.6.2/scripts/makefile.linux | 239 + .../external/libpng-1.6.2/scripts/makefile.mips | 94 + .../external/libpng-1.6.2/scripts/makefile.msc | 95 + .../external/libpng-1.6.2/scripts/makefile.msys | 204 + .../external/libpng-1.6.2/scripts/makefile.ne12bsd | 50 + .../external/libpng-1.6.2/scripts/makefile.netbsd | 50 + .../external/libpng-1.6.2/scripts/makefile.openbsd | 82 + .../external/libpng-1.6.2/scripts/makefile.sco | 218 + .../external/libpng-1.6.2/scripts/makefile.sggcc | 228 + .../external/libpng-1.6.2/scripts/makefile.sgi | 229 + .../external/libpng-1.6.2/scripts/makefile.so9 | 239 + .../external/libpng-1.6.2/scripts/makefile.solaris | 236 + .../libpng-1.6.2/scripts/makefile.solaris-x86 | 236 + .../external/libpng-1.6.2/scripts/makefile.std | 124 + .../external/libpng-1.6.2/scripts/makefile.sunos | 107 + .../external/libpng-1.6.2/scripts/makefile.tc3 | 93 + .../external/libpng-1.6.2/scripts/makefile.vcwin32 | 108 + src/SDL2/external/libpng-1.6.2/scripts/makevms.com | 142 + src/SDL2/external/libpng-1.6.2/scripts/options.awk | 893 + .../external/libpng-1.6.2/scripts/pnglibconf.dfa | 856 + .../libpng-1.6.2/scripts/pnglibconf.h.prebuilt | 211 + .../external/libpng-1.6.2/scripts/pnglibconf.mak | 54 + src/SDL2/external/libpng-1.6.2/scripts/pngwin.rc | 112 + src/SDL2/external/libpng-1.6.2/scripts/prefix.dfn | 24 + .../external/libpng-1.6.2/scripts/smakefile.ppc | 34 + src/SDL2/external/libpng-1.6.2/scripts/sym.dfn | 15 + src/SDL2/external/libpng-1.6.2/scripts/symbols.def | 251 + src/SDL2/external/libpng-1.6.2/scripts/symbols.dfn | 58 + src/SDL2/external/libpng-1.6.2/scripts/vers.dfn | 19 + src/SDL2/external/libpng-1.6.2/test-driver | 127 + src/SDL2/external/libpng-1.6.2/tests/pngstest | 13 + src/SDL2/external/libpng-1.6.2/tests/pngstest-0g01 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-0g02 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-0g04 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-0g08 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-0g16 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-2c08 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-2c16 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-3p01 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-3p02 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-3p04 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-3p08 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-4a08 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-4a16 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-6a08 | 2 + src/SDL2/external/libpng-1.6.2/tests/pngstest-6a16 | 2 + .../external/libpng-1.6.2/tests/pngstest-error | 14 + src/SDL2/external/libpng-1.6.2/tests/pngtest | 2 + .../external/libpng-1.6.2/tests/pngunknown-IDAT | 2 + .../external/libpng-1.6.2/tests/pngunknown-discard | 2 + .../external/libpng-1.6.2/tests/pngunknown-if-safe | 2 + .../external/libpng-1.6.2/tests/pngunknown-sAPI | 2 + .../external/libpng-1.6.2/tests/pngunknown-sTER | 2 + .../external/libpng-1.6.2/tests/pngunknown-save | 2 + .../external/libpng-1.6.2/tests/pngunknown-vpAg | 2 + .../libpng-1.6.2/tests/pngvalid-gamma-16-to-8 | 2 + .../libpng-1.6.2/tests/pngvalid-gamma-alpha-mode | 2 + .../libpng-1.6.2/tests/pngvalid-gamma-background | 2 + .../tests/pngvalid-gamma-expand16-alpha-mode | 2 + .../tests/pngvalid-gamma-expand16-background | 2 + .../tests/pngvalid-gamma-expand16-transform | 2 + .../libpng-1.6.2/tests/pngvalid-gamma-sbit | 2 + .../libpng-1.6.2/tests/pngvalid-gamma-threshold | 2 + .../libpng-1.6.2/tests/pngvalid-gamma-transform | 2 + .../tests/pngvalid-progressive-interlace-size | 2 + .../tests/pngvalid-progressive-interlace-standard | 2 + .../tests/pngvalid-progressive-interlace-transform | 2 + .../tests/pngvalid-progressive-standard | 2 + .../external/libpng-1.6.2/tests/pngvalid-standard | 2 + src/SDL2/external/libwebp-0.3.0/.gitattributes | 4 + src/SDL2/external/libwebp-0.3.0/.gitignore | 28 + src/SDL2/external/libwebp-0.3.0/.mailmap | 6 + src/SDL2/external/libwebp-0.3.0/AUTHORS | 17 + src/SDL2/external/libwebp-0.3.0/Android.mk | 75 + src/SDL2/external/libwebp-0.3.0/COPYING | 30 + src/SDL2/external/libwebp-0.3.0/ChangeLog | 1311 ++ src/SDL2/external/libwebp-0.3.0/Makefile.am | 3 + src/SDL2/external/libwebp-0.3.0/Makefile.vc | 341 + src/SDL2/external/libwebp-0.3.0/NEWS | 61 + src/SDL2/external/libwebp-0.3.0/PATENTS | 22 + src/SDL2/external/libwebp-0.3.0/README | 560 + src/SDL2/external/libwebp-0.3.0/README.mux | 185 + src/SDL2/external/libwebp-0.3.0/autogen.sh | 2 + src/SDL2/external/libwebp-0.3.0/configure.ac | 433 + src/SDL2/external/libwebp-0.3.0/doc/README | 29 + src/SDL2/external/libwebp-0.3.0/doc/TODO | 13 + src/SDL2/external/libwebp-0.3.0/doc/template.html | 94 + .../libwebp-0.3.0/doc/webp-container-spec.txt | 895 + .../doc/webp-lossless-bitstream-spec.txt | 1081 + .../external/libwebp-0.3.0/examples/Makefile.am | 52 + src/SDL2/external/libwebp-0.3.0/examples/cwebp.c | 1065 + src/SDL2/external/libwebp-0.3.0/examples/dwebp.c | 684 + .../external/libwebp-0.3.0/examples/example_util.c | 77 + .../external/libwebp-0.3.0/examples/example_util.h | 34 + .../external/libwebp-0.3.0/examples/gif2webp.c | 534 + src/SDL2/external/libwebp-0.3.0/examples/jpegdec.c | 292 + src/SDL2/external/libwebp-0.3.0/examples/jpegdec.h | 33 + .../external/libwebp-0.3.0/examples/metadata.c | 47 + .../external/libwebp-0.3.0/examples/metadata.h | 45 + src/SDL2/external/libwebp-0.3.0/examples/pngdec.c | 294 + src/SDL2/external/libwebp-0.3.0/examples/pngdec.h | 33 + .../external/libwebp-0.3.0/examples/stopwatch.h | 47 + src/SDL2/external/libwebp-0.3.0/examples/test.webp | Bin 0 -> 4880 bytes .../external/libwebp-0.3.0/examples/test_ref.ppm | 4 + src/SDL2/external/libwebp-0.3.0/examples/tiffdec.c | 139 + src/SDL2/external/libwebp-0.3.0/examples/tiffdec.h | 32 + src/SDL2/external/libwebp-0.3.0/examples/vwebp.c | 507 + src/SDL2/external/libwebp-0.3.0/examples/webpmux.c | 1034 + src/SDL2/external/libwebp-0.3.0/examples/wicdec.c | 347 + src/SDL2/external/libwebp-0.3.0/examples/wicdec.h | 32 + src/SDL2/external/libwebp-0.3.0/iosbuild.sh | 93 + src/SDL2/external/libwebp-0.3.0/m4/.gitignore | 2 + src/SDL2/external/libwebp-0.3.0/m4/ax_pthread.m4 | 309 + src/SDL2/external/libwebp-0.3.0/makefile.unix | 294 + src/SDL2/external/libwebp-0.3.0/man/Makefile.am | 8 + src/SDL2/external/libwebp-0.3.0/man/cwebp.1 | 266 + src/SDL2/external/libwebp-0.3.0/man/dwebp.1 | 116 + src/SDL2/external/libwebp-0.3.0/man/gif2webp.1 | 96 + src/SDL2/external/libwebp-0.3.0/man/webpmux.1 | 174 + src/SDL2/external/libwebp-0.3.0/src/.gitignore | 1 + src/SDL2/external/libwebp-0.3.0/src/Makefile.am | 55 + .../external/libwebp-0.3.0/src/dec/Makefile.am | 28 + src/SDL2/external/libwebp-0.3.0/src/dec/alpha.c | 113 + src/SDL2/external/libwebp-0.3.0/src/dec/buffer.c | 215 + .../external/libwebp-0.3.0/src/dec/decode_vp8.h | 183 + src/SDL2/external/libwebp-0.3.0/src/dec/frame.c | 692 + src/SDL2/external/libwebp-0.3.0/src/dec/idec.c | 841 + src/SDL2/external/libwebp-0.3.0/src/dec/io.c | 633 + src/SDL2/external/libwebp-0.3.0/src/dec/layer.c | 35 + src/SDL2/external/libwebp-0.3.0/src/dec/quant.c | 113 + src/SDL2/external/libwebp-0.3.0/src/dec/tree.c | 589 + src/SDL2/external/libwebp-0.3.0/src/dec/vp8.c | 758 + src/SDL2/external/libwebp-0.3.0/src/dec/vp8i.h | 334 + src/SDL2/external/libwebp-0.3.0/src/dec/vp8l.c | 1246 + src/SDL2/external/libwebp-0.3.0/src/dec/vp8li.h | 122 + src/SDL2/external/libwebp-0.3.0/src/dec/webp.c | 789 + src/SDL2/external/libwebp-0.3.0/src/dec/webpi.h | 114 + .../external/libwebp-0.3.0/src/demux/Makefile.am | 15 + src/SDL2/external/libwebp-0.3.0/src/demux/demux.c | 952 + .../libwebp-0.3.0/src/demux/libwebpdemux.pc.in | 11 + .../external/libwebp-0.3.0/src/dsp/Makefile.am | 44 + src/SDL2/external/libwebp-0.3.0/src/dsp/cpu.c | 85 + src/SDL2/external/libwebp-0.3.0/src/dsp/dec.c | 737 + src/SDL2/external/libwebp-0.3.0/src/dsp/dec_neon.c | 405 + src/SDL2/external/libwebp-0.3.0/src/dsp/dec_sse2.c | 908 + src/SDL2/external/libwebp-0.3.0/src/dsp/dsp.h | 213 + src/SDL2/external/libwebp-0.3.0/src/dsp/enc.c | 729 + src/SDL2/external/libwebp-0.3.0/src/dsp/enc_neon.c | 637 + src/SDL2/external/libwebp-0.3.0/src/dsp/enc_sse2.c | 967 + src/SDL2/external/libwebp-0.3.0/src/dsp/lossless.c | 1385 ++ src/SDL2/external/libwebp-0.3.0/src/dsp/lossless.h | 102 + .../external/libwebp-0.3.0/src/dsp/upsampling.c | 367 + .../libwebp-0.3.0/src/dsp/upsampling_neon.c | 292 + .../libwebp-0.3.0/src/dsp/upsampling_sse2.c | 215 + src/SDL2/external/libwebp-0.3.0/src/dsp/yuv.c | 73 + src/SDL2/external/libwebp-0.3.0/src/dsp/yuv.h | 282 + .../external/libwebp-0.3.0/src/enc/Makefile.am | 33 + src/SDL2/external/libwebp-0.3.0/src/enc/alpha.c | 409 + src/SDL2/external/libwebp-0.3.0/src/enc/analysis.c | 419 + .../libwebp-0.3.0/src/enc/backward_references.c | 892 + .../libwebp-0.3.0/src/enc/backward_references.h | 217 + src/SDL2/external/libwebp-0.3.0/src/enc/config.c | 141 + src/SDL2/external/libwebp-0.3.0/src/enc/cost.c | 494 + src/SDL2/external/libwebp-0.3.0/src/enc/cost.h | 49 + src/SDL2/external/libwebp-0.3.0/src/enc/filter.c | 409 + src/SDL2/external/libwebp-0.3.0/src/enc/frame.c | 977 + .../external/libwebp-0.3.0/src/enc/histogram.c | 512 + .../external/libwebp-0.3.0/src/enc/histogram.h | 99 + src/SDL2/external/libwebp-0.3.0/src/enc/iterator.c | 422 + src/SDL2/external/libwebp-0.3.0/src/enc/layer.c | 49 + src/SDL2/external/libwebp-0.3.0/src/enc/picture.c | 1197 + src/SDL2/external/libwebp-0.3.0/src/enc/quant.c | 1050 + src/SDL2/external/libwebp-0.3.0/src/enc/syntax.c | 428 + src/SDL2/external/libwebp-0.3.0/src/enc/token.c | 254 + src/SDL2/external/libwebp-0.3.0/src/enc/tree.c | 510 + src/SDL2/external/libwebp-0.3.0/src/enc/vp8enci.h | 548 + src/SDL2/external/libwebp-0.3.0/src/enc/vp8l.c | 1173 + src/SDL2/external/libwebp-0.3.0/src/enc/vp8li.h | 68 + src/SDL2/external/libwebp-0.3.0/src/enc/webpenc.c | 419 + src/SDL2/external/libwebp-0.3.0/src/libwebp.pc.in | 11 + .../libwebp-0.3.0/src/libwebpdecoder.pc.in | 11 + .../external/libwebp-0.3.0/src/mux/Makefile.am | 18 + .../libwebp-0.3.0/src/mux/libwebpmux.pc.in | 11 + src/SDL2/external/libwebp-0.3.0/src/mux/muxedit.c | 724 + src/SDL2/external/libwebp-0.3.0/src/mux/muxi.h | 221 + .../external/libwebp-0.3.0/src/mux/muxinternal.c | 539 + src/SDL2/external/libwebp-0.3.0/src/mux/muxread.c | 518 + .../external/libwebp-0.3.0/src/utils/Makefile.am | 41 + .../external/libwebp-0.3.0/src/utils/bit_reader.c | 212 + .../external/libwebp-0.3.0/src/utils/bit_reader.h | 329 + .../external/libwebp-0.3.0/src/utils/bit_writer.c | 284 + .../external/libwebp-0.3.0/src/utils/bit_writer.h | 123 + .../external/libwebp-0.3.0/src/utils/color_cache.c | 44 + .../external/libwebp-0.3.0/src/utils/color_cache.h | 68 + .../external/libwebp-0.3.0/src/utils/filters.c | 228 + .../external/libwebp-0.3.0/src/utils/filters.h | 55 + .../external/libwebp-0.3.0/src/utils/huffman.c | 238 + .../external/libwebp-0.3.0/src/utils/huffman.h | 78 + .../libwebp-0.3.0/src/utils/huffman_encode.c | 438 + .../libwebp-0.3.0/src/utils/huffman_encode.h | 47 + .../libwebp-0.3.0/src/utils/quant_levels.c | 145 + .../libwebp-0.3.0/src/utils/quant_levels.h | 34 + .../libwebp-0.3.0/src/utils/quant_levels_dec.c | 28 + .../libwebp-0.3.0/src/utils/quant_levels_dec.h | 30 + .../external/libwebp-0.3.0/src/utils/rescaler.c | 152 + .../external/libwebp-0.3.0/src/utils/rescaler.h | 76 + src/SDL2/external/libwebp-0.3.0/src/utils/thread.c | 243 + src/SDL2/external/libwebp-0.3.0/src/utils/thread.h | 90 + src/SDL2/external/libwebp-0.3.0/src/utils/utils.c | 47 + src/SDL2/external/libwebp-0.3.0/src/utils/utils.h | 81 + src/SDL2/external/libwebp-0.3.0/src/webp/decode.h | 488 + src/SDL2/external/libwebp-0.3.0/src/webp/demux.h | 212 + src/SDL2/external/libwebp-0.3.0/src/webp/encode.h | 485 + .../libwebp-0.3.0/src/webp/format_constants.h | 86 + src/SDL2/external/libwebp-0.3.0/src/webp/mux.h | 371 + .../external/libwebp-0.3.0/src/webp/mux_types.h | 87 + src/SDL2/external/libwebp-0.3.0/src/webp/types.h | 45 + src/SDL2/external/libwebp-0.3.0/swig/README | 56 + src/SDL2/external/libwebp-0.3.0/swig/libwebp.i | 391 + src/SDL2/external/libwebp-0.3.0/swig/libwebp.jar | Bin 0 -> 2143 bytes src/SDL2/external/libwebp-0.3.0/swig/libwebp.py | 198 + .../libwebp-0.3.0/swig/libwebp_java_wrap.c | 1765 ++ .../libwebp-0.3.0/swig/libwebp_python_wrap.c | 5398 +++++ src/SDL2/external/libwebp-0.3.0/swig/setup.py | 40 + src/SDL2/external/tiff-4.0.3/COPYRIGHT | 21 + src/SDL2/external/tiff-4.0.3/ChangeLog | 5835 +++++ src/SDL2/external/tiff-4.0.3/HOWTO-RELEASE | 117 + src/SDL2/external/tiff-4.0.3/Makefile.am | 59 + src/SDL2/external/tiff-4.0.3/Makefile.in | 926 + src/SDL2/external/tiff-4.0.3/Makefile.vc | 58 + src/SDL2/external/tiff-4.0.3/README | 61 + src/SDL2/external/tiff-4.0.3/README.vms | 12 + src/SDL2/external/tiff-4.0.3/RELEASE-DATE | 1 + src/SDL2/external/tiff-4.0.3/SConstruct | 171 + src/SDL2/external/tiff-4.0.3/TODO | 12 + src/SDL2/external/tiff-4.0.3/VERSION | 1 + src/SDL2/external/tiff-4.0.3/aclocal.m4 | 1080 + src/SDL2/external/tiff-4.0.3/autogen.sh | 8 + src/SDL2/external/tiff-4.0.3/build/Makefile.am | 30 + src/SDL2/external/tiff-4.0.3/build/Makefile.in | 644 + src/SDL2/external/tiff-4.0.3/build/README | 3 + src/SDL2/external/tiff-4.0.3/config/compile | 142 + src/SDL2/external/tiff-4.0.3/config/config.guess | 1526 ++ src/SDL2/external/tiff-4.0.3/config/config.sub | 1658 ++ src/SDL2/external/tiff-4.0.3/config/depcomp | 584 + src/SDL2/external/tiff-4.0.3/config/install-sh | 507 + src/SDL2/external/tiff-4.0.3/config/ltmain.sh | 9655 ++++++++ src/SDL2/external/tiff-4.0.3/config/missing | 367 + src/SDL2/external/tiff-4.0.3/config/mkinstalldirs | 161 + src/SDL2/external/tiff-4.0.3/config/test-driver | 127 + src/SDL2/external/tiff-4.0.3/configure | 22610 +++++++++++++++++++ src/SDL2/external/tiff-4.0.3/configure.ac | 1031 + src/SDL2/external/tiff-4.0.3/configure.com | 1357 ++ src/SDL2/external/tiff-4.0.3/contrib/Makefile.am | 29 + src/SDL2/external/tiff-4.0.3/contrib/Makefile.in | 643 + src/SDL2/external/tiff-4.0.3/contrib/README | 2 + .../tiff-4.0.3/contrib/addtiffo/Makefile.am | 36 + .../tiff-4.0.3/contrib/addtiffo/Makefile.in | 602 + .../tiff-4.0.3/contrib/addtiffo/Makefile.vc | 28 + .../external/tiff-4.0.3/contrib/addtiffo/README | 142 + .../tiff-4.0.3/contrib/addtiffo/addtiffo.c | 176 + .../tiff-4.0.3/contrib/addtiffo/tif_overview.c | 899 + .../tiff-4.0.3/contrib/addtiffo/tif_ovrcache.c | 341 + .../tiff-4.0.3/contrib/addtiffo/tif_ovrcache.h | 103 + .../external/tiff-4.0.3/contrib/dbs/Makefile.am | 44 + .../external/tiff-4.0.3/contrib/dbs/Makefile.in | 758 + src/SDL2/external/tiff-4.0.3/contrib/dbs/README | 7 + src/SDL2/external/tiff-4.0.3/contrib/dbs/tiff-bi.c | 91 + .../tiff-4.0.3/contrib/dbs/tiff-grayscale.c | 147 + .../external/tiff-4.0.3/contrib/dbs/tiff-palette.c | 284 + .../external/tiff-4.0.3/contrib/dbs/tiff-rgb.c | 201 + .../tiff-4.0.3/contrib/dbs/xtiff/Makefile.am | 42 + .../tiff-4.0.3/contrib/dbs/xtiff/Makefile.in | 468 + .../external/tiff-4.0.3/contrib/dbs/xtiff/README | 6 + .../tiff-4.0.3/contrib/dbs/xtiff/patchlevel.h | 8 + .../external/tiff-4.0.3/contrib/dbs/xtiff/xtiff.c | 1290 ++ .../tiff-4.0.3/contrib/dbs/xtiff/xtifficon.h | 21 + .../tiff-4.0.3/contrib/iptcutil/Makefile.am | 36 + .../tiff-4.0.3/contrib/iptcutil/Makefile.in | 599 + .../external/tiff-4.0.3/contrib/iptcutil/README | 25 + .../tiff-4.0.3/contrib/iptcutil/iptcutil.c | 943 + .../external/tiff-4.0.3/contrib/iptcutil/test.iptc | Bin 0 -> 1107 bytes .../external/tiff-4.0.3/contrib/iptcutil/test.txt | 32 + .../external/tiff-4.0.3/contrib/mfs/Makefile.am | 27 + .../external/tiff-4.0.3/contrib/mfs/Makefile.in | 453 + src/SDL2/external/tiff-4.0.3/contrib/mfs/README | 37 + .../external/tiff-4.0.3/contrib/mfs/mfs_file.c | 586 + .../external/tiff-4.0.3/contrib/pds/Makefile.am | 27 + .../external/tiff-4.0.3/contrib/pds/Makefile.in | 453 + src/SDL2/external/tiff-4.0.3/contrib/pds/README | 90 + .../tiff-4.0.3/contrib/pds/tif_imageiter.c | 525 + .../tiff-4.0.3/contrib/pds/tif_imageiter.h | 64 + .../tiff-4.0.3/contrib/pds/tif_pdsdirread.c | 1131 + .../tiff-4.0.3/contrib/pds/tif_pdsdirwrite.c | 971 + .../external/tiff-4.0.3/contrib/ras/Makefile.am | 27 + .../external/tiff-4.0.3/contrib/ras/Makefile.in | 453 + src/SDL2/external/tiff-4.0.3/contrib/ras/README | 10 + src/SDL2/external/tiff-4.0.3/contrib/ras/ras2tif.c | 254 + src/SDL2/external/tiff-4.0.3/contrib/ras/tif2ras.c | 344 + .../external/tiff-4.0.3/contrib/stream/Makefile.am | 27 + .../external/tiff-4.0.3/contrib/stream/Makefile.in | 453 + src/SDL2/external/tiff-4.0.3/contrib/stream/README | 30 + .../tiff-4.0.3/contrib/stream/tiffstream.cpp | 238 + .../tiff-4.0.3/contrib/stream/tiffstream.h | 70 + .../external/tiff-4.0.3/contrib/tags/Makefile.am | 27 + .../external/tiff-4.0.3/contrib/tags/Makefile.in | 453 + src/SDL2/external/tiff-4.0.3/contrib/tags/README | 132 + .../external/tiff-4.0.3/contrib/tags/listtif.c | 39 + .../external/tiff-4.0.3/contrib/tags/maketif.c | 77 + .../external/tiff-4.0.3/contrib/tags/xtif_dir.c | 350 + .../external/tiff-4.0.3/contrib/tags/xtiffio.h | 59 + .../external/tiff-4.0.3/contrib/tags/xtiffiop.h | 72 + .../tiff-4.0.3/contrib/win_dib/Makefile.am | 27 + .../tiff-4.0.3/contrib/win_dib/Makefile.in | 453 + .../tiff-4.0.3/contrib/win_dib/Makefile.w95 | 134 + .../tiff-4.0.3/contrib/win_dib/README.Tiffile | 31 + .../tiff-4.0.3/contrib/win_dib/README.tiff2dib | 51 + .../tiff-4.0.3/contrib/win_dib/Tiffile.cpp | 449 + .../external/tiff-4.0.3/contrib/win_dib/tiff2dib.c | 379 + src/SDL2/external/tiff-4.0.3/html/Makefile.am | 86 + src/SDL2/external/tiff-4.0.3/html/Makefile.in | 753 + .../external/tiff-4.0.3/html/TIFFTechNote2.html | 707 + src/SDL2/external/tiff-4.0.3/html/addingtags.html | 292 + src/SDL2/external/tiff-4.0.3/html/bugs.html | 63 + src/SDL2/external/tiff-4.0.3/html/build.html | 524 + src/SDL2/external/tiff-4.0.3/html/contrib.html | 209 + src/SDL2/external/tiff-4.0.3/html/document.html | 52 + src/SDL2/external/tiff-4.0.3/html/images.html | 41 + .../external/tiff-4.0.3/html/images/Makefile.am | 46 + .../external/tiff-4.0.3/html/images/Makefile.in | 526 + src/SDL2/external/tiff-4.0.3/html/images/back.gif | Bin 0 -> 1000 bytes src/SDL2/external/tiff-4.0.3/html/images/bali.jpg | Bin 0 -> 26152 bytes src/SDL2/external/tiff-4.0.3/html/images/cat.gif | Bin 0 -> 12477 bytes src/SDL2/external/tiff-4.0.3/html/images/cover.jpg | Bin 0 -> 20189 bytes .../external/tiff-4.0.3/html/images/cramps.gif | Bin 0 -> 13137 bytes src/SDL2/external/tiff-4.0.3/html/images/dave.gif | Bin 0 -> 8220 bytes src/SDL2/external/tiff-4.0.3/html/images/info.gif | Bin 0 -> 131 bytes src/SDL2/external/tiff-4.0.3/html/images/jello.jpg | Bin 0 -> 13744 bytes src/SDL2/external/tiff-4.0.3/html/images/jim.gif | Bin 0 -> 14493 bytes src/SDL2/external/tiff-4.0.3/html/images/note.gif | Bin 0 -> 264 bytes .../external/tiff-4.0.3/html/images/oxford.gif | Bin 0 -> 6069 bytes src/SDL2/external/tiff-4.0.3/html/images/quad.jpg | Bin 0 -> 23904 bytes src/SDL2/external/tiff-4.0.3/html/images/ring.gif | Bin 0 -> 4275 bytes .../external/tiff-4.0.3/html/images/smallliz.jpg | Bin 0 -> 16463 bytes .../external/tiff-4.0.3/html/images/strike.gif | Bin 0 -> 5610 bytes .../external/tiff-4.0.3/html/images/warning.gif | Bin 0 -> 287 bytes src/SDL2/external/tiff-4.0.3/html/index.html | 123 + src/SDL2/external/tiff-4.0.3/html/internals.html | 572 + src/SDL2/external/tiff-4.0.3/html/intro.html | 68 + src/SDL2/external/tiff-4.0.3/html/libtiff.html | 747 + src/SDL2/external/tiff-4.0.3/html/man/Makefile.am | 126 + src/SDL2/external/tiff-4.0.3/html/man/Makefile.in | 602 + .../tiff-4.0.3/html/man/TIFFClose.3tiff.html | 87 + .../tiff-4.0.3/html/man/TIFFDataWidth.3tiff.html | 98 + .../tiff-4.0.3/html/man/TIFFError.3tiff.html | 106 + .../html/man/TIFFFieldDataType.3tiff.html | 89 + .../tiff-4.0.3/html/man/TIFFFieldName.3tiff.html | 86 + .../html/man/TIFFFieldPassCount.3tiff.html | 98 + .../html/man/TIFFFieldReadCount.3tiff.html | 101 + .../tiff-4.0.3/html/man/TIFFFieldTag.3tiff.html | 88 + .../html/man/TIFFFieldWriteCount.3tiff.html | 108 + .../tiff-4.0.3/html/man/TIFFFlush.3tiff.html | 113 + .../tiff-4.0.3/html/man/TIFFGetField.3tiff.html | 1969 ++ .../tiff-4.0.3/html/man/TIFFOpen.3tiff.html | 421 + .../html/man/TIFFPrintDirectory.3tiff.html | 225 + .../tiff-4.0.3/html/man/TIFFRGBAImage.3tiff.html | 319 + .../html/man/TIFFReadDirectory.3tiff.html | 218 + .../html/man/TIFFReadEncodedStrip.3tiff.html | 133 + .../html/man/TIFFReadEncodedTile.3tiff.html | 130 + .../html/man/TIFFReadRGBAImage.3tiff.html | 301 + .../html/man/TIFFReadRGBAStrip.3tiff.html | 208 + .../html/man/TIFFReadRGBATile.3tiff.html | 261 + .../html/man/TIFFReadRawStrip.3tiff.html | 109 + .../tiff-4.0.3/html/man/TIFFReadRawTile.3tiff.html | 111 + .../html/man/TIFFReadScanline.3tiff.html | 157 + .../tiff-4.0.3/html/man/TIFFReadTile.3tiff.html | 133 + .../html/man/TIFFSetDirectory.3tiff.html | 122 + .../tiff-4.0.3/html/man/TIFFSetField.3tiff.html | 1865 ++ .../tiff-4.0.3/html/man/TIFFWarning.3tiff.html | 108 + .../html/man/TIFFWriteDirectory.3tiff.html | 176 + .../html/man/TIFFWriteEncodedStrip.3tiff.html | 153 + .../html/man/TIFFWriteEncodedTile.3tiff.html | 147 + .../html/man/TIFFWriteRawStrip.3tiff.html | 144 + .../html/man/TIFFWriteRawTile.3tiff.html | 128 + .../html/man/TIFFWriteScanline.3tiff.html | 206 + .../tiff-4.0.3/html/man/TIFFWriteTile.3tiff.html | 115 + .../tiff-4.0.3/html/man/TIFFbuffer.3tiff.html | 116 + .../tiff-4.0.3/html/man/TIFFcodec.3tiff.html | 116 + .../tiff-4.0.3/html/man/TIFFcolor.3tiff.html | 975 + .../tiff-4.0.3/html/man/TIFFmemory.3tiff.html | 110 + .../tiff-4.0.3/html/man/TIFFquery.3tiff.html | 148 + .../tiff-4.0.3/html/man/TIFFsize.3tiff.html | 95 + .../tiff-4.0.3/html/man/TIFFstrip.3tiff.html | 129 + .../tiff-4.0.3/html/man/TIFFswab.3tiff.html | 110 + .../tiff-4.0.3/html/man/TIFFtile.3tiff.html | 141 + .../external/tiff-4.0.3/html/man/bmp2tiff.1.html | 121 + .../external/tiff-4.0.3/html/man/fax2ps.1.html | 252 + .../external/tiff-4.0.3/html/man/fax2tiff.1.html | 607 + .../external/tiff-4.0.3/html/man/gif2tiff.1.html | 141 + src/SDL2/external/tiff-4.0.3/html/man/index.html | 64 + .../tiff-4.0.3/html/man/libtiff.3tiff.html | 1150 + .../external/tiff-4.0.3/html/man/pal2rgb.1.html | 189 + .../external/tiff-4.0.3/html/man/ppm2tiff.1.html | 141 + .../external/tiff-4.0.3/html/man/ras2tiff.1.html | 139 + .../external/tiff-4.0.3/html/man/raw2tiff.1.html | 510 + .../external/tiff-4.0.3/html/man/rgb2ycbcr.1.html | 155 + .../external/tiff-4.0.3/html/man/sgi2tiff.1.html | 147 + .../external/tiff-4.0.3/html/man/thumbnail.1.html | 148 + .../external/tiff-4.0.3/html/man/tiff2bw.1.html | 161 + .../external/tiff-4.0.3/html/man/tiff2pdf.1.html | 609 + .../external/tiff-4.0.3/html/man/tiff2ps.1.html | 532 + .../external/tiff-4.0.3/html/man/tiff2rgba.1.html | 162 + .../external/tiff-4.0.3/html/man/tiffcmp.1.html | 156 + .../external/tiff-4.0.3/html/man/tiffcp.1.html | 536 + .../external/tiff-4.0.3/html/man/tiffcrop.1.html | 684 + .../external/tiff-4.0.3/html/man/tiffdither.1.html | 183 + .../external/tiff-4.0.3/html/man/tiffdump.1.html | 145 + .../external/tiff-4.0.3/html/man/tiffgt.1.html | 551 + .../external/tiff-4.0.3/html/man/tiffinfo.1.html | 196 + .../external/tiff-4.0.3/html/man/tiffmedian.1.html | 183 + .../external/tiff-4.0.3/html/man/tiffset.1.html | 176 + .../external/tiff-4.0.3/html/man/tiffsplit.1.html | 102 + .../external/tiff-4.0.3/html/man/tiffsv.1.html | 207 + src/SDL2/external/tiff-4.0.3/html/misc.html | 116 + src/SDL2/external/tiff-4.0.3/html/support.html | 655 + src/SDL2/external/tiff-4.0.3/html/tools.html | 164 + src/SDL2/external/tiff-4.0.3/html/v3.4beta007.html | 112 + src/SDL2/external/tiff-4.0.3/html/v3.4beta016.html | 122 + src/SDL2/external/tiff-4.0.3/html/v3.4beta018.html | 84 + src/SDL2/external/tiff-4.0.3/html/v3.4beta024.html | 139 + src/SDL2/external/tiff-4.0.3/html/v3.4beta028.html | 146 + src/SDL2/external/tiff-4.0.3/html/v3.4beta029.html | 86 + src/SDL2/external/tiff-4.0.3/html/v3.4beta031.html | 94 + src/SDL2/external/tiff-4.0.3/html/v3.4beta032.html | 90 + src/SDL2/external/tiff-4.0.3/html/v3.4beta033.html | 82 + src/SDL2/external/tiff-4.0.3/html/v3.4beta034.html | 68 + src/SDL2/external/tiff-4.0.3/html/v3.4beta035.html | 63 + src/SDL2/external/tiff-4.0.3/html/v3.4beta036.html | 117 + src/SDL2/external/tiff-4.0.3/html/v3.5.1.html | 75 + src/SDL2/external/tiff-4.0.3/html/v3.5.2.html | 108 + src/SDL2/external/tiff-4.0.3/html/v3.5.3.html | 132 + src/SDL2/external/tiff-4.0.3/html/v3.5.4.html | 88 + src/SDL2/external/tiff-4.0.3/html/v3.5.5.html | 155 + src/SDL2/external/tiff-4.0.3/html/v3.5.6-beta.html | 185 + src/SDL2/external/tiff-4.0.3/html/v3.5.7.html | 259 + src/SDL2/external/tiff-4.0.3/html/v3.6.0.html | 434 + src/SDL2/external/tiff-4.0.3/html/v3.6.1.html | 199 + src/SDL2/external/tiff-4.0.3/html/v3.7.0.html | 144 + src/SDL2/external/tiff-4.0.3/html/v3.7.0alpha.html | 249 + src/SDL2/external/tiff-4.0.3/html/v3.7.0beta.html | 162 + src/SDL2/external/tiff-4.0.3/html/v3.7.0beta2.html | 131 + src/SDL2/external/tiff-4.0.3/html/v3.7.1.html | 233 + src/SDL2/external/tiff-4.0.3/html/v3.7.2.html | 222 + src/SDL2/external/tiff-4.0.3/html/v3.7.3.html | 230 + src/SDL2/external/tiff-4.0.3/html/v3.7.4.html | 133 + src/SDL2/external/tiff-4.0.3/html/v3.8.0.html | 199 + src/SDL2/external/tiff-4.0.3/html/v3.8.1.html | 217 + src/SDL2/external/tiff-4.0.3/html/v3.8.2.html | 137 + src/SDL2/external/tiff-4.0.3/html/v3.9.0beta.html | 304 + src/SDL2/external/tiff-4.0.3/html/v3.9.1.html | 115 + src/SDL2/external/tiff-4.0.3/html/v3.9.2.html | 122 + src/SDL2/external/tiff-4.0.3/html/v4.0.0.html | 269 + src/SDL2/external/tiff-4.0.3/html/v4.0.1.html | 113 + src/SDL2/external/tiff-4.0.3/html/v4.0.2.html | 118 + src/SDL2/external/tiff-4.0.3/libtiff-4.pc.in | 11 + src/SDL2/external/tiff-4.0.3/libtiff/Makefile.am | 150 + src/SDL2/external/tiff-4.0.3/libtiff/Makefile.in | 915 + src/SDL2/external/tiff-4.0.3/libtiff/Makefile.vc | 102 + src/SDL2/external/tiff-4.0.3/libtiff/SConstruct | 73 + src/SDL2/external/tiff-4.0.3/libtiff/libtiff.def | 158 + src/SDL2/external/tiff-4.0.3/libtiff/libtiff.map | 4 + src/SDL2/external/tiff-4.0.3/libtiff/libtiffxx.map | 4 + src/SDL2/external/tiff-4.0.3/libtiff/mkg3states.c | 451 + src/SDL2/external/tiff-4.0.3/libtiff/t4.h | 292 + src/SDL2/external/tiff-4.0.3/libtiff/tif_aux.c | 358 + src/SDL2/external/tiff-4.0.3/libtiff/tif_close.c | 140 + src/SDL2/external/tiff-4.0.3/libtiff/tif_codec.c | 165 + src/SDL2/external/tiff-4.0.3/libtiff/tif_color.c | 287 + .../external/tiff-4.0.3/libtiff/tif_compress.c | 304 + .../external/tiff-4.0.3/libtiff/tif_config.h-vms | 46 + .../external/tiff-4.0.3/libtiff/tif_config.h.in | 395 + .../external/tiff-4.0.3/libtiff/tif_config.vc.h | 71 + .../external/tiff-4.0.3/libtiff/tif_config.wince.h | 71 + src/SDL2/external/tiff-4.0.3/libtiff/tif_dir.c | 1659 ++ src/SDL2/external/tiff-4.0.3/libtiff/tif_dir.h | 308 + src/SDL2/external/tiff-4.0.3/libtiff/tif_dirinfo.c | 957 + src/SDL2/external/tiff-4.0.3/libtiff/tif_dirread.c | 5613 +++++ .../external/tiff-4.0.3/libtiff/tif_dirwrite.c | 2910 +++ .../external/tiff-4.0.3/libtiff/tif_dumpmode.c | 143 + src/SDL2/external/tiff-4.0.3/libtiff/tif_error.c | 80 + .../external/tiff-4.0.3/libtiff/tif_extension.c | 118 + src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3.c | 1595 ++ src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3.h | 538 + src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3sm.c | 1260 ++ src/SDL2/external/tiff-4.0.3/libtiff/tif_flush.c | 118 + .../external/tiff-4.0.3/libtiff/tif_getimage.c | 2867 +++ src/SDL2/external/tiff-4.0.3/libtiff/tif_jbig.c | 213 + src/SDL2/external/tiff-4.0.3/libtiff/tif_jpeg.c | 2304 ++ src/SDL2/external/tiff-4.0.3/libtiff/tif_jpeg_12.c | 65 + src/SDL2/external/tiff-4.0.3/libtiff/tif_luv.c | 1683 ++ src/SDL2/external/tiff-4.0.3/libtiff/tif_lzma.c | 495 + src/SDL2/external/tiff-4.0.3/libtiff/tif_lzw.c | 1167 + src/SDL2/external/tiff-4.0.3/libtiff/tif_next.c | 160 + src/SDL2/external/tiff-4.0.3/libtiff/tif_ojpeg.c | 2496 ++ src/SDL2/external/tiff-4.0.3/libtiff/tif_open.c | 725 + .../external/tiff-4.0.3/libtiff/tif_packbits.c | 300 + .../external/tiff-4.0.3/libtiff/tif_pixarlog.c | 1426 ++ src/SDL2/external/tiff-4.0.3/libtiff/tif_predict.c | 764 + src/SDL2/external/tiff-4.0.3/libtiff/tif_predict.h | 77 + src/SDL2/external/tiff-4.0.3/libtiff/tif_print.c | 716 + src/SDL2/external/tiff-4.0.3/libtiff/tif_read.c | 1083 + .../external/tiff-4.0.3/libtiff/tif_stream.cxx | 425 + src/SDL2/external/tiff-4.0.3/libtiff/tif_strip.c | 383 + src/SDL2/external/tiff-4.0.3/libtiff/tif_swab.c | 310 + src/SDL2/external/tiff-4.0.3/libtiff/tif_thunder.c | 207 + src/SDL2/external/tiff-4.0.3/libtiff/tif_tile.c | 299 + src/SDL2/external/tiff-4.0.3/libtiff/tif_unix.c | 322 + src/SDL2/external/tiff-4.0.3/libtiff/tif_version.c | 40 + src/SDL2/external/tiff-4.0.3/libtiff/tif_warning.c | 81 + src/SDL2/external/tiff-4.0.3/libtiff/tif_win32.c | 440 + src/SDL2/external/tiff-4.0.3/libtiff/tif_write.c | 771 + src/SDL2/external/tiff-4.0.3/libtiff/tif_zip.c | 469 + src/SDL2/external/tiff-4.0.3/libtiff/tiff.h | 678 + src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.h.in | 127 + src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.vc.h | 160 + .../external/tiff-4.0.3/libtiff/tiffconf.wince.h | 121 + src/SDL2/external/tiff-4.0.3/libtiff/tiffio.h | 557 + src/SDL2/external/tiff-4.0.3/libtiff/tiffio.hxx | 49 + src/SDL2/external/tiff-4.0.3/libtiff/tiffiop.h | 367 + src/SDL2/external/tiff-4.0.3/libtiff/tiffvers.h | 9 + src/SDL2/external/tiff-4.0.3/libtiff/uvcode.h | 180 + src/SDL2/external/tiff-4.0.3/m4/acinclude.m4 | 851 + src/SDL2/external/tiff-4.0.3/m4/libtool.m4 | 7982 +++++++ src/SDL2/external/tiff-4.0.3/m4/ltoptions.m4 | 384 + src/SDL2/external/tiff-4.0.3/m4/ltsugar.m4 | 123 + src/SDL2/external/tiff-4.0.3/m4/ltversion.m4 | 23 + src/SDL2/external/tiff-4.0.3/m4/lt~obsolete.m4 | 98 + src/SDL2/external/tiff-4.0.3/man/Makefile.am | 98 + src/SDL2/external/tiff-4.0.3/man/Makefile.in | 661 + src/SDL2/external/tiff-4.0.3/man/TIFFClose.3tiff | 53 + .../external/tiff-4.0.3/man/TIFFDataWidth.3tiff | 74 + src/SDL2/external/tiff-4.0.3/man/TIFFError.3tiff | 69 + .../tiff-4.0.3/man/TIFFFieldDataType.3tiff | 53 + .../external/tiff-4.0.3/man/TIFFFieldName.3tiff | 52 + .../tiff-4.0.3/man/TIFFFieldPassCount.3tiff | 73 + .../tiff-4.0.3/man/TIFFFieldReadCount.3tiff | 77 + .../external/tiff-4.0.3/man/TIFFFieldTag.3tiff | 56 + .../tiff-4.0.3/man/TIFFFieldWriteCount.3tiff | 88 + src/SDL2/external/tiff-4.0.3/man/TIFFFlush.3tiff | 64 + .../external/tiff-4.0.3/man/TIFFGetField.3tiff | 229 + src/SDL2/external/tiff-4.0.3/man/TIFFOpen.3tiff | 279 + .../tiff-4.0.3/man/TIFFPrintDirectory.3tiff | 70 + .../external/tiff-4.0.3/man/TIFFRGBAImage.3tiff | 286 + .../tiff-4.0.3/man/TIFFReadDirectory.3tiff | 164 + .../tiff-4.0.3/man/TIFFReadEncodedStrip.3tiff | 78 + .../tiff-4.0.3/man/TIFFReadEncodedTile.3tiff | 76 + .../tiff-4.0.3/man/TIFFReadRGBAImage.3tiff | 218 + .../tiff-4.0.3/man/TIFFReadRGBAStrip.3tiff | 170 + .../external/tiff-4.0.3/man/TIFFReadRGBATile.3tiff | 171 + .../external/tiff-4.0.3/man/TIFFReadRawStrip.3tiff | 64 + .../external/tiff-4.0.3/man/TIFFReadRawTile.3tiff | 65 + .../external/tiff-4.0.3/man/TIFFReadScanline.3tiff | 94 + .../external/tiff-4.0.3/man/TIFFReadTile.3tiff | 84 + .../external/tiff-4.0.3/man/TIFFSetDirectory.3tiff | 79 + .../external/tiff-4.0.3/man/TIFFSetField.3tiff | 217 + src/SDL2/external/tiff-4.0.3/man/TIFFWarning.3tiff | 70 + .../tiff-4.0.3/man/TIFFWriteDirectory.3tiff | 138 + .../tiff-4.0.3/man/TIFFWriteEncodedStrip.3tiff | 102 + .../tiff-4.0.3/man/TIFFWriteEncodedTile.3tiff | 96 + .../tiff-4.0.3/man/TIFFWriteRawStrip.3tiff | 96 + .../external/tiff-4.0.3/man/TIFFWriteRawTile.3tiff | 84 + .../tiff-4.0.3/man/TIFFWriteScanline.3tiff | 154 + .../external/tiff-4.0.3/man/TIFFWriteTile.3tiff | 77 + src/SDL2/external/tiff-4.0.3/man/TIFFbuffer.3tiff | 77 + src/SDL2/external/tiff-4.0.3/man/TIFFcodec.3tiff | 82 + src/SDL2/external/tiff-4.0.3/man/TIFFcolor.3tiff | 268 + src/SDL2/external/tiff-4.0.3/man/TIFFmemory.3tiff | 90 + src/SDL2/external/tiff-4.0.3/man/TIFFquery.3tiff | 142 + src/SDL2/external/tiff-4.0.3/man/TIFFsize.3tiff | 59 + src/SDL2/external/tiff-4.0.3/man/TIFFstrip.3tiff | 99 + src/SDL2/external/tiff-4.0.3/man/TIFFswab.3tiff | 80 + src/SDL2/external/tiff-4.0.3/man/TIFFtile.3tiff | 131 + src/SDL2/external/tiff-4.0.3/man/bmp2tiff.1 | 85 + src/SDL2/external/tiff-4.0.3/man/fax2ps.1 | 159 + src/SDL2/external/tiff-4.0.3/man/fax2tiff.1 | 286 + src/SDL2/external/tiff-4.0.3/man/gif2tiff.1 | 81 + src/SDL2/external/tiff-4.0.3/man/libtiff.3tiff | 545 + src/SDL2/external/tiff-4.0.3/man/pal2rgb.1 | 111 + src/SDL2/external/tiff-4.0.3/man/ppm2tiff.1 | 105 + src/SDL2/external/tiff-4.0.3/man/ras2tiff.1 | 96 + src/SDL2/external/tiff-4.0.3/man/raw2tiff.1 | 196 + src/SDL2/external/tiff-4.0.3/man/rgb2ycbcr.1 | 99 + src/SDL2/external/tiff-4.0.3/man/sgi2tiff.1 | 93 + src/SDL2/external/tiff-4.0.3/man/thumbnail.1 | 90 + src/SDL2/external/tiff-4.0.3/man/tiff2bw.1 | 94 + src/SDL2/external/tiff-4.0.3/man/tiff2pdf.1 | 254 + src/SDL2/external/tiff-4.0.3/man/tiff2ps.1 | 273 + src/SDL2/external/tiff-4.0.3/man/tiff2rgba.1 | 97 + src/SDL2/external/tiff-4.0.3/man/tiffcmp.1 | 87 + src/SDL2/external/tiff-4.0.3/man/tiffcp.1 | 306 + src/SDL2/external/tiff-4.0.3/man/tiffcrop.1 | 571 + src/SDL2/external/tiff-4.0.3/man/tiffdither.1 | 132 + src/SDL2/external/tiff-4.0.3/man/tiffdump.1 | 81 + src/SDL2/external/tiff-4.0.3/man/tiffgt.1 | 245 + src/SDL2/external/tiff-4.0.3/man/tiffinfo.1 | 88 + src/SDL2/external/tiff-4.0.3/man/tiffmedian.1 | 112 + src/SDL2/external/tiff-4.0.3/man/tiffset.1 | 96 + src/SDL2/external/tiff-4.0.3/man/tiffsplit.1 | 69 + src/SDL2/external/tiff-4.0.3/man/tiffsv.1 | 142 + src/SDL2/external/tiff-4.0.3/nmake.opt | 218 + src/SDL2/external/tiff-4.0.3/port/Makefile.am | 31 + src/SDL2/external/tiff-4.0.3/port/Makefile.in | 605 + src/SDL2/external/tiff-4.0.3/port/Makefile.vc | 43 + src/SDL2/external/tiff-4.0.3/port/dummy.c | 12 + src/SDL2/external/tiff-4.0.3/port/getopt.c | 125 + src/SDL2/external/tiff-4.0.3/port/lfind.c | 62 + src/SDL2/external/tiff-4.0.3/port/libport.h | 51 + src/SDL2/external/tiff-4.0.3/port/strcasecmp.c | 51 + src/SDL2/external/tiff-4.0.3/port/strtoul.c | 109 + src/SDL2/external/tiff-4.0.3/port/strtoull.c | 116 + src/SDL2/external/tiff-4.0.3/test/Makefile.am | 292 + src/SDL2/external/tiff-4.0.3/test/Makefile.in | 1843 ++ src/SDL2/external/tiff-4.0.3/test/ascii_tag.c | 177 + .../external/tiff-4.0.3/test/bmp2tiff_palette.sh | 7 + src/SDL2/external/tiff-4.0.3/test/bmp2tiff_rgb.sh | 7 + src/SDL2/external/tiff-4.0.3/test/check_tag.c | 91 + src/SDL2/external/tiff-4.0.3/test/common.sh | 129 + src/SDL2/external/tiff-4.0.3/test/custom_dir.c | 247 + src/SDL2/external/tiff-4.0.3/test/gif2tiff.sh | 7 + .../external/tiff-4.0.3/test/images/README.txt | 29 + .../tiff-4.0.3/test/images/logluv-3c-16b.tiff | Bin 0 -> 166 bytes .../tiff-4.0.3/test/images/minisblack-1c-16b.tiff | Bin 0 -> 47733 bytes .../tiff-4.0.3/test/images/minisblack-1c-8b.pgm | Bin 0 -> 23722 bytes .../tiff-4.0.3/test/images/minisblack-1c-8b.tiff | Bin 0 -> 24001 bytes .../test/images/minisblack-2c-8b-alpha.tiff | Bin 0 -> 4068 bytes .../tiff-4.0.3/test/images/miniswhite-1c-1b.pbm | Bin 0 -> 3031 bytes .../tiff-4.0.3/test/images/miniswhite-1c-1b.tiff | Bin 0 -> 3289 bytes .../tiff-4.0.3/test/images/palette-1c-1b.tiff | Bin 0 -> 3312 bytes .../tiff-4.0.3/test/images/palette-1c-4b.tiff | Bin 0 -> 12322 bytes .../tiff-4.0.3/test/images/palette-1c-8b.bmp | Bin 0 -> 24954 bytes .../tiff-4.0.3/test/images/palette-1c-8b.gif | Bin 0 -> 21614 bytes .../tiff-4.0.3/test/images/palette-1c-8b.tiff | Bin 0 -> 25548 bytes .../tiff-4.0.3/test/images/quad-tile.jpg.tiff | Bin 0 -> 27576 bytes .../tiff-4.0.3/test/images/rgb-3c-16b.tiff | Bin 0 -> 142670 bytes .../external/tiff-4.0.3/test/images/rgb-3c-8b.bmp | Bin 0 -> 71298 bytes .../external/tiff-4.0.3/test/images/rgb-3c-8b.ppm | Bin 0 -> 71136 bytes .../external/tiff-4.0.3/test/images/rgb-3c-8b.tiff | Bin 0 -> 71470 bytes src/SDL2/external/tiff-4.0.3/test/long_tag.c | 156 + src/SDL2/external/tiff-4.0.3/test/ppm2tiff_pbm.sh | 7 + src/SDL2/external/tiff-4.0.3/test/ppm2tiff_pgm.sh | 7 + src/SDL2/external/tiff-4.0.3/test/ppm2tiff_ppm.sh | 7 + src/SDL2/external/tiff-4.0.3/test/raw_decode.c | 254 + src/SDL2/external/tiff-4.0.3/test/rewrite_tag.c | 346 + src/SDL2/external/tiff-4.0.3/test/short_tag.c | 205 + src/SDL2/external/tiff-4.0.3/test/strip.c | 290 + src/SDL2/external/tiff-4.0.3/test/strip_rw.c | 157 + src/SDL2/external/tiff-4.0.3/test/test_arrays.c | 829 + src/SDL2/external/tiff-4.0.3/test/test_arrays.h | 63 + src/SDL2/external/tiff-4.0.3/test/tiff2pdf.sh | 6 + src/SDL2/external/tiff-4.0.3/test/tiff2ps-EPS1.sh | 6 + src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS1.sh | 6 + src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS2.sh | 6 + src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS3.sh | 6 + .../tiff-4.0.3/test/tiff2rgba-logluv-3c-16b.sh | 7 + .../tiff-4.0.3/test/tiff2rgba-minisblack-1c-16b.sh | 7 + .../tiff-4.0.3/test/tiff2rgba-minisblack-1c-8b.sh | 7 + .../test/tiff2rgba-minisblack-2c-8b-alpha.sh | 7 + .../tiff-4.0.3/test/tiff2rgba-miniswhite-1c-1b.sh | 7 + .../tiff-4.0.3/test/tiff2rgba-palette-1c-1b.sh | 7 + .../tiff-4.0.3/test/tiff2rgba-palette-1c-4b.sh | 7 + .../tiff-4.0.3/test/tiff2rgba-palette-1c-8b.sh | 7 + .../tiff-4.0.3/test/tiff2rgba-quad-tile.jpg.sh | 7 + .../tiff-4.0.3/test/tiff2rgba-rgb-3c-16b.sh | 7 + .../tiff-4.0.3/test/tiff2rgba-rgb-3c-8b.sh | 7 + .../external/tiff-4.0.3/test/tiffcp-g3-1d-fill.sh | 7 + src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-1d.sh | 6 + .../external/tiff-4.0.3/test/tiffcp-g3-2d-fill.sh | 7 + src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-2d.sh | 6 + src/SDL2/external/tiff-4.0.3/test/tiffcp-g3.sh | 6 + src/SDL2/external/tiff-4.0.3/test/tiffcp-g4.sh | 6 + src/SDL2/external/tiff-4.0.3/test/tiffcp-logluv.sh | 7 + .../external/tiff-4.0.3/test/tiffcp-split-join.sh | 16 + src/SDL2/external/tiff-4.0.3/test/tiffcp-split.sh | 13 + .../external/tiff-4.0.3/test/tiffcp-thumbnail.sh | 10 + .../tiff-4.0.3/test/tiffcrop-R90-logluv-3c-16b.sh | 7 + .../test/tiffcrop-R90-minisblack-1c-16b.sh | 7 + .../test/tiffcrop-R90-minisblack-1c-8b.sh | 7 + .../test/tiffcrop-R90-minisblack-2c-8b-alpha.sh | 7 + .../test/tiffcrop-R90-miniswhite-1c-1b.sh | 7 + .../tiff-4.0.3/test/tiffcrop-R90-palette-1c-1b.sh | 7 + .../tiff-4.0.3/test/tiffcrop-R90-palette-1c-4b.sh | 7 + .../tiff-4.0.3/test/tiffcrop-R90-palette-1c-8b.sh | 7 + .../tiff-4.0.3/test/tiffcrop-R90-rgb-3c-16b.sh | 7 + .../tiff-4.0.3/test/tiffcrop-R90-rgb-3c-8b.sh | 7 + .../test/tiffcrop-doubleflip-logluv-3c-16b.sh | 7 + .../test/tiffcrop-doubleflip-minisblack-1c-16b.sh | 7 + .../test/tiffcrop-doubleflip-minisblack-1c-8b.sh | 7 + .../tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh | 7 + .../test/tiffcrop-doubleflip-miniswhite-1c-1b.sh | 7 + .../test/tiffcrop-doubleflip-palette-1c-1b.sh | 7 + .../test/tiffcrop-doubleflip-palette-1c-4b.sh | 7 + .../test/tiffcrop-doubleflip-palette-1c-8b.sh | 7 + .../test/tiffcrop-doubleflip-rgb-3c-16b.sh | 7 + .../test/tiffcrop-doubleflip-rgb-3c-8b.sh | 7 + .../test/tiffcrop-extract-logluv-3c-16b.sh | 7 + .../test/tiffcrop-extract-minisblack-1c-16b.sh | 7 + .../test/tiffcrop-extract-minisblack-1c-8b.sh | 7 + .../tiffcrop-extract-minisblack-2c-8b-alpha.sh | 7 + .../test/tiffcrop-extract-miniswhite-1c-1b.sh | 7 + .../test/tiffcrop-extract-palette-1c-1b.sh | 7 + .../test/tiffcrop-extract-palette-1c-4b.sh | 7 + .../test/tiffcrop-extract-palette-1c-8b.sh | 7 + .../tiff-4.0.3/test/tiffcrop-extract-rgb-3c-16b.sh | 7 + .../tiff-4.0.3/test/tiffcrop-extract-rgb-3c-8b.sh | 7 + .../test/tiffcrop-extractz14-logluv-3c-16b.sh | 7 + .../test/tiffcrop-extractz14-minisblack-1c-16b.sh | 7 + .../test/tiffcrop-extractz14-minisblack-1c-8b.sh | 7 + .../tiffcrop-extractz14-minisblack-2c-8b-alpha.sh | 7 + .../test/tiffcrop-extractz14-miniswhite-1c-1b.sh | 7 + .../test/tiffcrop-extractz14-palette-1c-1b.sh | 7 + .../test/tiffcrop-extractz14-palette-1c-4b.sh | 7 + .../test/tiffcrop-extractz14-palette-1c-8b.sh | 7 + .../test/tiffcrop-extractz14-rgb-3c-16b.sh | 7 + .../test/tiffcrop-extractz14-rgb-3c-8b.sh | 7 + src/SDL2/external/tiff-4.0.3/test/tiffdump.sh | 6 + src/SDL2/external/tiff-4.0.3/test/tiffinfo.sh | 6 + src/SDL2/external/tiff-4.0.3/test/tifftest.h | 42 + src/SDL2/external/tiff-4.0.3/tools/Makefile.am | 145 + src/SDL2/external/tiff-4.0.3/tools/Makefile.in | 923 + src/SDL2/external/tiff-4.0.3/tools/Makefile.vc | 52 + src/SDL2/external/tiff-4.0.3/tools/bmp2tiff.c | 854 + src/SDL2/external/tiff-4.0.3/tools/fax2ps.c | 449 + src/SDL2/external/tiff-4.0.3/tools/fax2tiff.c | 469 + src/SDL2/external/tiff-4.0.3/tools/gif2tiff.c | 530 + src/SDL2/external/tiff-4.0.3/tools/pal2rgb.c | 435 + src/SDL2/external/tiff-4.0.3/tools/ppm2tiff.c | 366 + src/SDL2/external/tiff-4.0.3/tools/ras2tiff.c | 316 + src/SDL2/external/tiff-4.0.3/tools/rasterfile.h | 42 + src/SDL2/external/tiff-4.0.3/tools/raw2tiff.c | 651 + src/SDL2/external/tiff-4.0.3/tools/rgb2ycbcr.c | 390 + src/SDL2/external/tiff-4.0.3/tools/sgi2tiff.c | 335 + src/SDL2/external/tiff-4.0.3/tools/sgisv.c | 316 + src/SDL2/external/tiff-4.0.3/tools/thumbnail.c | 659 + src/SDL2/external/tiff-4.0.3/tools/tiff2bw.c | 471 + src/SDL2/external/tiff-4.0.3/tools/tiff2pdf.c | 5388 +++++ src/SDL2/external/tiff-4.0.3/tools/tiff2ps.c | 3073 +++ src/SDL2/external/tiff-4.0.3/tools/tiff2rgba.c | 541 + src/SDL2/external/tiff-4.0.3/tools/tiffcmp.c | 644 + src/SDL2/external/tiff-4.0.3/tools/tiffcp.c | 1860 ++ src/SDL2/external/tiff-4.0.3/tools/tiffcrop.c | 9066 ++++++++ src/SDL2/external/tiff-4.0.3/tools/tiffdither.c | 333 + src/SDL2/external/tiff-4.0.3/tools/tiffdump.c | 855 + src/SDL2/external/tiff-4.0.3/tools/tiffgt.c | 466 + src/SDL2/external/tiff-4.0.3/tools/tiffinfo.c | 472 + src/SDL2/external/tiff-4.0.3/tools/tiffmedian.c | 906 + src/SDL2/external/tiff-4.0.3/tools/tiffset.c | 340 + src/SDL2/external/tiff-4.0.3/tools/tiffsplit.c | 303 + src/SDL2/external/tiff-4.0.3/tools/ycbcr.c | 168 + src/SDL2/external/zlib-1.2.8/CMakeLists.txt | 249 + src/SDL2/external/zlib-1.2.8/ChangeLog | 1472 ++ src/SDL2/external/zlib-1.2.8/FAQ | 368 + src/SDL2/external/zlib-1.2.8/INDEX | 68 + src/SDL2/external/zlib-1.2.8/Makefile.in | 288 + src/SDL2/external/zlib-1.2.8/README | 115 + src/SDL2/external/zlib-1.2.8/adler32.c | 179 + src/SDL2/external/zlib-1.2.8/amiga/Makefile.pup | 69 + src/SDL2/external/zlib-1.2.8/amiga/Makefile.sas | 68 + src/SDL2/external/zlib-1.2.8/as400/bndsrc | 215 + src/SDL2/external/zlib-1.2.8/as400/compile.clp | 110 + src/SDL2/external/zlib-1.2.8/as400/readme.txt | 115 + src/SDL2/external/zlib-1.2.8/as400/zlib.inc | 451 + src/SDL2/external/zlib-1.2.8/compress.c | 80 + src/SDL2/external/zlib-1.2.8/configure | 831 + .../external/zlib-1.2.8/contrib/README.contrib | 78 + .../zlib-1.2.8/contrib/ada/buffer_demo.adb | 106 + src/SDL2/external/zlib-1.2.8/contrib/ada/mtest.adb | 156 + src/SDL2/external/zlib-1.2.8/contrib/ada/read.adb | 156 + .../external/zlib-1.2.8/contrib/ada/readme.txt | 65 + src/SDL2/external/zlib-1.2.8/contrib/ada/test.adb | 463 + .../zlib-1.2.8/contrib/ada/zlib-streams.adb | 225 + .../zlib-1.2.8/contrib/ada/zlib-streams.ads | 114 + .../external/zlib-1.2.8/contrib/ada/zlib-thin.adb | 141 + .../external/zlib-1.2.8/contrib/ada/zlib-thin.ads | 450 + src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.adb | 701 + src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.ads | 328 + src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.gpr | 20 + .../zlib-1.2.8/contrib/amd64/amd64-match.S | 452 + .../external/zlib-1.2.8/contrib/asm686/README.686 | 51 + .../external/zlib-1.2.8/contrib/asm686/match.S | 357 + src/SDL2/external/zlib-1.2.8/contrib/blast/README | 4 + src/SDL2/external/zlib-1.2.8/contrib/blast/blast.c | 446 + src/SDL2/external/zlib-1.2.8/contrib/blast/blast.h | 75 + src/SDL2/external/zlib-1.2.8/contrib/blast/test.pk | Bin 0 -> 8 bytes .../external/zlib-1.2.8/contrib/blast/test.txt | 1 + .../external/zlib-1.2.8/contrib/delphi/ZLib.pas | 557 + .../zlib-1.2.8/contrib/delphi/ZLibConst.pas | 11 + .../external/zlib-1.2.8/contrib/delphi/readme.txt | 76 + .../external/zlib-1.2.8/contrib/delphi/zlibd32.mak | 99 + .../zlib-1.2.8/contrib/dotzlib/DotZLib.build | 33 + .../zlib-1.2.8/contrib/dotzlib/DotZLib.chm | Bin 0 -> 72726 bytes .../zlib-1.2.8/contrib/dotzlib/DotZLib.sln | 21 + .../contrib/dotzlib/DotZLib/AssemblyInfo.cs | 58 + .../contrib/dotzlib/DotZLib/ChecksumImpl.cs | 202 + .../contrib/dotzlib/DotZLib/CircularBuffer.cs | 83 + .../contrib/dotzlib/DotZLib/CodecBase.cs | 198 + .../zlib-1.2.8/contrib/dotzlib/DotZLib/Deflater.cs | 106 + .../zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.cs | 288 + .../contrib/dotzlib/DotZLib/DotZLib.csproj | 141 + .../contrib/dotzlib/DotZLib/GZipStream.cs | 301 + .../zlib-1.2.8/contrib/dotzlib/DotZLib/Inflater.cs | 105 + .../contrib/dotzlib/DotZLib/UnitTests.cs | 274 + .../zlib-1.2.8/contrib/dotzlib/LICENSE_1_0.txt | 23 + .../external/zlib-1.2.8/contrib/dotzlib/readme.txt | 58 + .../zlib-1.2.8/contrib/gcc_gvmat64/gvmat64.S | 574 + .../external/zlib-1.2.8/contrib/infback9/README | 1 + .../zlib-1.2.8/contrib/infback9/infback9.c | 615 + .../zlib-1.2.8/contrib/infback9/infback9.h | 37 + .../external/zlib-1.2.8/contrib/infback9/inffix9.h | 107 + .../zlib-1.2.8/contrib/infback9/inflate9.h | 47 + .../zlib-1.2.8/contrib/infback9/inftree9.c | 324 + .../zlib-1.2.8/contrib/infback9/inftree9.h | 61 + .../zlib-1.2.8/contrib/inflate86/inffas86.c | 1157 + .../zlib-1.2.8/contrib/inflate86/inffast.S | 1368 ++ .../external/zlib-1.2.8/contrib/iostream/test.cpp | 24 + .../zlib-1.2.8/contrib/iostream/zfstream.cpp | 329 + .../zlib-1.2.8/contrib/iostream/zfstream.h | 128 + .../zlib-1.2.8/contrib/iostream2/zstream.h | 307 + .../zlib-1.2.8/contrib/iostream2/zstream_test.cpp | 25 + .../external/zlib-1.2.8/contrib/iostream3/README | 35 + .../external/zlib-1.2.8/contrib/iostream3/TODO | 17 + .../external/zlib-1.2.8/contrib/iostream3/test.cc | 50 + .../zlib-1.2.8/contrib/iostream3/zfstream.cc | 479 + .../zlib-1.2.8/contrib/iostream3/zfstream.h | 466 + .../zlib-1.2.8/contrib/masmx64/bld_ml64.bat | 2 + .../zlib-1.2.8/contrib/masmx64/gvmat64.asm | 553 + .../zlib-1.2.8/contrib/masmx64/inffas8664.c | 186 + .../zlib-1.2.8/contrib/masmx64/inffasx64.asm | 396 + .../external/zlib-1.2.8/contrib/masmx64/readme.txt | 31 + .../zlib-1.2.8/contrib/masmx86/bld_ml32.bat | 2 + .../zlib-1.2.8/contrib/masmx86/inffas32.asm | 1080 + .../zlib-1.2.8/contrib/masmx86/match686.asm | 479 + .../external/zlib-1.2.8/contrib/masmx86/readme.txt | 27 + .../zlib-1.2.8/contrib/minizip/Makefile.am | 45 + .../contrib/minizip/MiniZip64_Changes.txt | 6 + .../zlib-1.2.8/contrib/minizip/MiniZip64_info.txt | 74 + .../zlib-1.2.8/contrib/minizip/configure.ac | 32 + .../external/zlib-1.2.8/contrib/minizip/crypt.h | 131 + .../external/zlib-1.2.8/contrib/minizip/ioapi.c | 247 + .../external/zlib-1.2.8/contrib/minizip/ioapi.h | 208 + .../external/zlib-1.2.8/contrib/minizip/iowin32.c | 461 + .../external/zlib-1.2.8/contrib/minizip/iowin32.h | 28 + .../zlib-1.2.8/contrib/minizip/make_vms.com | 25 + .../external/zlib-1.2.8/contrib/minizip/miniunz.c | 660 + .../zlib-1.2.8/contrib/minizip/miniunzip.1 | 63 + .../external/zlib-1.2.8/contrib/minizip/minizip.1 | 46 + .../external/zlib-1.2.8/contrib/minizip/minizip.c | 520 + .../zlib-1.2.8/contrib/minizip/minizip.pc.in | 12 + .../external/zlib-1.2.8/contrib/minizip/mztools.c | 291 + .../external/zlib-1.2.8/contrib/minizip/mztools.h | 37 + .../external/zlib-1.2.8/contrib/minizip/unzip.c | 2125 ++ .../external/zlib-1.2.8/contrib/minizip/unzip.h | 437 + src/SDL2/external/zlib-1.2.8/contrib/minizip/zip.c | 2007 ++ src/SDL2/external/zlib-1.2.8/contrib/minizip/zip.h | 362 + .../external/zlib-1.2.8/contrib/pascal/example.pas | 599 + .../external/zlib-1.2.8/contrib/pascal/readme.txt | 76 + .../external/zlib-1.2.8/contrib/pascal/zlibd32.mak | 99 + .../external/zlib-1.2.8/contrib/pascal/zlibpas.pas | 276 + src/SDL2/external/zlib-1.2.8/contrib/puff/README | 63 + src/SDL2/external/zlib-1.2.8/contrib/puff/puff.c | 840 + src/SDL2/external/zlib-1.2.8/contrib/puff/puff.h | 35 + .../external/zlib-1.2.8/contrib/puff/pufftest.c | 165 + .../external/zlib-1.2.8/contrib/puff/zeros.raw | Bin 0 -> 2517 bytes .../zlib-1.2.8/contrib/testzlib/testzlib.c | 275 + .../zlib-1.2.8/contrib/testzlib/testzlib.txt | 10 + .../external/zlib-1.2.8/contrib/untgz/Makefile.msc | 17 + src/SDL2/external/zlib-1.2.8/contrib/untgz/untgz.c | 674 + .../external/zlib-1.2.8/contrib/vstudio/readme.txt | 65 + .../contrib/vstudio/vc10/miniunz.vcxproj | 310 + .../contrib/vstudio/vc10/miniunz.vcxproj.filters | 22 + .../contrib/vstudio/vc10/minizip.vcxproj | 307 + .../contrib/vstudio/vc10/minizip.vcxproj.filters | 22 + .../contrib/vstudio/vc10/testzlib.vcxproj | 420 + .../contrib/vstudio/vc10/testzlib.vcxproj.filters | 58 + .../contrib/vstudio/vc10/testzlibdll.vcxproj | 310 + .../vstudio/vc10/testzlibdll.vcxproj.filters | 22 + .../zlib-1.2.8/contrib/vstudio/vc10/zlib.rc | 32 + .../contrib/vstudio/vc10/zlibstat.vcxproj | 473 + .../contrib/vstudio/vc10/zlibstat.vcxproj.filters | 77 + .../zlib-1.2.8/contrib/vstudio/vc10/zlibvc.def | 143 + .../zlib-1.2.8/contrib/vstudio/vc10/zlibvc.sln | 135 + .../zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj | 657 + .../contrib/vstudio/vc10/zlibvc.vcxproj.filters | 118 + .../contrib/vstudio/vc11/miniunz.vcxproj | 314 + .../contrib/vstudio/vc11/minizip.vcxproj | 311 + .../contrib/vstudio/vc11/testzlib.vcxproj | 426 + .../contrib/vstudio/vc11/testzlibdll.vcxproj | 314 + .../zlib-1.2.8/contrib/vstudio/vc11/zlib.rc | 32 + .../contrib/vstudio/vc11/zlibstat.vcxproj | 464 + .../zlib-1.2.8/contrib/vstudio/vc11/zlibvc.def | 143 + .../zlib-1.2.8/contrib/vstudio/vc11/zlibvc.sln | 117 + .../zlib-1.2.8/contrib/vstudio/vc11/zlibvc.vcxproj | 688 + .../zlib-1.2.8/contrib/vstudio/vc9/miniunz.vcproj | 565 + .../zlib-1.2.8/contrib/vstudio/vc9/minizip.vcproj | 562 + .../zlib-1.2.8/contrib/vstudio/vc9/testzlib.vcproj | 852 + .../contrib/vstudio/vc9/testzlibdll.vcproj | 565 + .../zlib-1.2.8/contrib/vstudio/vc9/zlib.rc | 32 + .../zlib-1.2.8/contrib/vstudio/vc9/zlibstat.vcproj | 835 + .../zlib-1.2.8/contrib/vstudio/vc9/zlibvc.def | 143 + .../zlib-1.2.8/contrib/vstudio/vc9/zlibvc.sln | 144 + .../zlib-1.2.8/contrib/vstudio/vc9/zlibvc.vcproj | 1156 + src/SDL2/external/zlib-1.2.8/crc32.c | 425 + src/SDL2/external/zlib-1.2.8/crc32.h | 441 + src/SDL2/external/zlib-1.2.8/deflate.c | 1967 ++ src/SDL2/external/zlib-1.2.8/deflate.h | 346 + src/SDL2/external/zlib-1.2.8/doc/algorithm.txt | 209 + src/SDL2/external/zlib-1.2.8/doc/rfc1950.txt | 619 + src/SDL2/external/zlib-1.2.8/doc/rfc1951.txt | 955 + src/SDL2/external/zlib-1.2.8/doc/rfc1952.txt | 675 + src/SDL2/external/zlib-1.2.8/doc/txtvsbin.txt | 107 + .../external/zlib-1.2.8/examples/README.examples | 49 + src/SDL2/external/zlib-1.2.8/examples/enough.c | 572 + src/SDL2/external/zlib-1.2.8/examples/fitblk.c | 233 + src/SDL2/external/zlib-1.2.8/examples/gun.c | 702 + src/SDL2/external/zlib-1.2.8/examples/gzappend.c | 504 + src/SDL2/external/zlib-1.2.8/examples/gzjoin.c | 449 + src/SDL2/external/zlib-1.2.8/examples/gzlog.c | 1059 + src/SDL2/external/zlib-1.2.8/examples/gzlog.h | 91 + .../external/zlib-1.2.8/examples/zlib_how.html | 545 + src/SDL2/external/zlib-1.2.8/examples/zpipe.c | 205 + src/SDL2/external/zlib-1.2.8/examples/zran.c | 409 + src/SDL2/external/zlib-1.2.8/gzclose.c | 25 + src/SDL2/external/zlib-1.2.8/gzguts.h | 209 + src/SDL2/external/zlib-1.2.8/gzlib.c | 634 + src/SDL2/external/zlib-1.2.8/gzread.c | 594 + src/SDL2/external/zlib-1.2.8/gzwrite.c | 577 + src/SDL2/external/zlib-1.2.8/infback.c | 640 + src/SDL2/external/zlib-1.2.8/inffast.c | 340 + src/SDL2/external/zlib-1.2.8/inffast.h | 11 + src/SDL2/external/zlib-1.2.8/inffixed.h | 94 + src/SDL2/external/zlib-1.2.8/inflate.c | 1512 ++ src/SDL2/external/zlib-1.2.8/inflate.h | 122 + src/SDL2/external/zlib-1.2.8/inftrees.c | 306 + src/SDL2/external/zlib-1.2.8/inftrees.h | 62 + src/SDL2/external/zlib-1.2.8/make-cross-x64.sh | 14 + src/SDL2/external/zlib-1.2.8/make-cross-x86.sh | 14 + src/SDL2/external/zlib-1.2.8/make_vms.com | 867 + src/SDL2/external/zlib-1.2.8/msdos/Makefile.bor | 115 + src/SDL2/external/zlib-1.2.8/msdos/Makefile.dj2 | 104 + src/SDL2/external/zlib-1.2.8/msdos/Makefile.emx | 69 + src/SDL2/external/zlib-1.2.8/msdos/Makefile.msc | 112 + src/SDL2/external/zlib-1.2.8/msdos/Makefile.tc | 100 + src/SDL2/external/zlib-1.2.8/nintendods/README | 5 + src/SDL2/external/zlib-1.2.8/old/Makefile.emx | 69 + src/SDL2/external/zlib-1.2.8/old/Makefile.riscos | 151 + src/SDL2/external/zlib-1.2.8/old/README | 3 + src/SDL2/external/zlib-1.2.8/old/descrip.mms | 48 + src/SDL2/external/zlib-1.2.8/old/os2/Makefile.os2 | 136 + src/SDL2/external/zlib-1.2.8/old/os2/zlib.def | 51 + src/SDL2/external/zlib-1.2.8/old/visual-basic.txt | 160 + src/SDL2/external/zlib-1.2.8/qnx/package.qpg | 141 + src/SDL2/external/zlib-1.2.8/test/example.c | 601 + src/SDL2/external/zlib-1.2.8/test/infcover.c | 671 + src/SDL2/external/zlib-1.2.8/test/minigzip.c | 651 + src/SDL2/external/zlib-1.2.8/treebuild.xml | 116 + src/SDL2/external/zlib-1.2.8/trees.c | 1226 + src/SDL2/external/zlib-1.2.8/trees.h | 128 + src/SDL2/external/zlib-1.2.8/uncompr.c | 59 + src/SDL2/external/zlib-1.2.8/watcom/watcom_f.mak | 43 + src/SDL2/external/zlib-1.2.8/watcom/watcom_l.mak | 43 + src/SDL2/external/zlib-1.2.8/win32/DLL_FAQ.txt | 397 + src/SDL2/external/zlib-1.2.8/win32/Makefile.bor | 110 + src/SDL2/external/zlib-1.2.8/win32/Makefile.gcc | 182 + src/SDL2/external/zlib-1.2.8/win32/Makefile.msc | 163 + .../external/zlib-1.2.8/win32/README-WIN32.txt | 103 + src/SDL2/external/zlib-1.2.8/win32/VisualC.txt | 3 + src/SDL2/external/zlib-1.2.8/win32/zlib.def | 86 + src/SDL2/external/zlib-1.2.8/win32/zlib1.rc | 40 + src/SDL2/external/zlib-1.2.8/zconf.h | 511 + src/SDL2/external/zlib-1.2.8/zconf.h.cmakein | 513 + src/SDL2/external/zlib-1.2.8/zconf.h.in | 511 + src/SDL2/external/zlib-1.2.8/zlib.3 | 151 + src/SDL2/external/zlib-1.2.8/zlib.3.pdf | Bin 0 -> 8734 bytes src/SDL2/external/zlib-1.2.8/zlib.h | 1768 ++ src/SDL2/external/zlib-1.2.8/zlib.map | 83 + src/SDL2/external/zlib-1.2.8/zlib.pc.cmakein | 13 + src/SDL2/external/zlib-1.2.8/zlib.pc.in | 13 + src/SDL2/external/zlib-1.2.8/zlib2ansi | 152 + src/SDL2/external/zlib-1.2.8/zutil.c | 324 + src/SDL2/external/zlib-1.2.8/zutil.h | 253 + src/SDL2/gcc-fat.sh | 103 + src/SDL2/install-sh | 507 + src/SDL2/ltmain.sh | 8407 +++++++ src/SDL2/miniz.h | 4771 ++++ src/SDL2/missing | 215 + src/SDL2/showimage.c | 175 + src/SDL2/version.rc | 38 + 1607 files changed, 669135 insertions(+) create mode 100644 src/SDL2/Android.mk create mode 100644 src/SDL2/CHANGES.txt create mode 100644 src/SDL2/COPYING.txt create mode 100644 src/SDL2/IMG.c create mode 100644 src/SDL2/IMG_ImageIO.m create mode 100644 src/SDL2/IMG_UIImage.m create mode 100644 src/SDL2/IMG_bmp.c create mode 100644 src/SDL2/IMG_gif.c create mode 100644 src/SDL2/IMG_jpg.c create mode 100644 src/SDL2/IMG_lbm.c create mode 100644 src/SDL2/IMG_pcx.c create mode 100644 src/SDL2/IMG_png.c create mode 100644 src/SDL2/IMG_pnm.c create mode 100644 src/SDL2/IMG_tga.c create mode 100644 src/SDL2/IMG_tif.c create mode 100644 src/SDL2/IMG_webp.c create mode 100644 src/SDL2/IMG_xcf.c create mode 100644 src/SDL2/IMG_xpm.c create mode 100644 src/SDL2/IMG_xv.c create mode 100644 src/SDL2/IMG_xxx.c create mode 100644 src/SDL2/Makefile.am create mode 100644 src/SDL2/Makefile.in create mode 100644 src/SDL2/README.txt create mode 100644 src/SDL2/SDL.h create mode 100644 src/SDL2/SDL2_image.pc.in create mode 100644 src/SDL2/SDL2_image.spec create mode 100644 src/SDL2/SDL2_image.spec.in create mode 100644 src/SDL2/SDL_assert.h create mode 100644 src/SDL2/SDL_atomic.h create mode 100644 src/SDL2/SDL_audio.h create mode 100644 src/SDL2/SDL_blendmode.h create mode 100644 src/SDL2/SDL_clipboard.h create mode 100644 src/SDL2/SDL_config.h create mode 100644 src/SDL2/SDL_config_macosx.h create mode 100644 src/SDL2/SDL_copying.h create mode 100644 src/SDL2/SDL_cpuinfo.h create mode 100644 src/SDL2/SDL_endian.h create mode 100644 src/SDL2/SDL_error.h create mode 100644 src/SDL2/SDL_events.h create mode 100644 src/SDL2/SDL_gamecontroller.h create mode 100644 src/SDL2/SDL_gesture.h create mode 100644 src/SDL2/SDL_haptic.h create mode 100644 src/SDL2/SDL_hints.h create mode 100644 src/SDL2/SDL_image.h create mode 100644 src/SDL2/SDL_joystick.h create mode 100644 src/SDL2/SDL_keyboard.h create mode 100644 src/SDL2/SDL_keycode.h create mode 100644 src/SDL2/SDL_loadso.h create mode 100644 src/SDL2/SDL_log.h create mode 100644 src/SDL2/SDL_main.h create mode 100644 src/SDL2/SDL_messagebox.h create mode 100644 src/SDL2/SDL_mouse.h create mode 100644 src/SDL2/SDL_mutex.h create mode 100644 src/SDL2/SDL_name.h create mode 100644 src/SDL2/SDL_opengl.h create mode 100644 src/SDL2/SDL_opengles.h create mode 100644 src/SDL2/SDL_opengles2.h create mode 100644 src/SDL2/SDL_pixels.h create mode 100644 src/SDL2/SDL_platform.h create mode 100644 src/SDL2/SDL_power.h create mode 100644 src/SDL2/SDL_quit.h create mode 100644 src/SDL2/SDL_rect.h create mode 100644 src/SDL2/SDL_render.h create mode 100644 src/SDL2/SDL_revision.h create mode 100644 src/SDL2/SDL_rwops.h create mode 100644 src/SDL2/SDL_scancode.h create mode 100644 src/SDL2/SDL_shape.h create mode 100644 src/SDL2/SDL_stdinc.h create mode 100644 src/SDL2/SDL_surface.h create mode 100644 src/SDL2/SDL_system.h create mode 100644 src/SDL2/SDL_syswm.h create mode 100644 src/SDL2/SDL_thread.h create mode 100644 src/SDL2/SDL_timer.h create mode 100644 src/SDL2/SDL_touch.h create mode 100644 src/SDL2/SDL_types.h create mode 100644 src/SDL2/SDL_version.h create mode 100644 src/SDL2/SDL_video.h create mode 100755 src/SDL2/VisualC/SDL_image_VS2008.sln create mode 100755 src/SDL2/VisualC/SDL_image_VS2008.vcproj create mode 100644 src/SDL2/VisualC/SDL_image_VS2010.sln create mode 100644 src/SDL2/VisualC/SDL_image_VS2010.vcxproj create mode 100644 src/SDL2/VisualC/SDL_image_VS2012.sln create mode 100644 src/SDL2/VisualC/SDL_image_VS2012.vcxproj create mode 100755 src/SDL2/VisualC/Version.rc create mode 100755 src/SDL2/VisualC/clean.sh create mode 100755 src/SDL2/VisualC/external/include/jconfig.h create mode 100755 src/SDL2/VisualC/external/include/jerror.h create mode 100755 src/SDL2/VisualC/external/include/jmorecfg.h create mode 100755 src/SDL2/VisualC/external/include/jpeglib.h create mode 100755 src/SDL2/VisualC/external/include/png.h create mode 100755 src/SDL2/VisualC/external/include/pngconf.h create mode 100644 src/SDL2/VisualC/external/include/pnglibconf.h create mode 100755 src/SDL2/VisualC/external/include/tiff.h create mode 100755 src/SDL2/VisualC/external/include/tiffconf.h create mode 100755 src/SDL2/VisualC/external/include/tiffio.h create mode 100755 src/SDL2/VisualC/external/include/tiffvers.h create mode 100644 src/SDL2/VisualC/external/include/webp/decode.h create mode 100644 src/SDL2/VisualC/external/include/webp/encode.h create mode 100644 src/SDL2/VisualC/external/include/webp/types.h create mode 100755 src/SDL2/VisualC/external/include/zconf.h create mode 100755 src/SDL2/VisualC/external/include/zlib.h create mode 100644 src/SDL2/VisualC/external/lib/x64/LICENSE.jpeg.txt create mode 100644 src/SDL2/VisualC/external/lib/x64/LICENSE.png.txt create mode 100644 src/SDL2/VisualC/external/lib/x64/LICENSE.tiff.txt create mode 100644 src/SDL2/VisualC/external/lib/x64/LICENSE.webp.txt create mode 100644 src/SDL2/VisualC/external/lib/x64/LICENSE.zlib.txt create mode 100755 src/SDL2/VisualC/external/lib/x64/libjpeg-9.dll create mode 100755 src/SDL2/VisualC/external/lib/x64/libpng16-16.dll create mode 100755 src/SDL2/VisualC/external/lib/x64/libtiff-5.dll create mode 100755 src/SDL2/VisualC/external/lib/x64/libwebp-4.dll create mode 100755 src/SDL2/VisualC/external/lib/x64/zlib1.dll create mode 100644 src/SDL2/VisualC/external/lib/x86/LICENSE.jpeg.txt create mode 100644 src/SDL2/VisualC/external/lib/x86/LICENSE.png.txt create mode 100644 src/SDL2/VisualC/external/lib/x86/LICENSE.tiff.txt create mode 100644 src/SDL2/VisualC/external/lib/x86/LICENSE.webp.txt create mode 100644 src/SDL2/VisualC/external/lib/x86/LICENSE.zlib.txt create mode 100755 src/SDL2/VisualC/external/lib/x86/libjpeg-9.dll create mode 100755 src/SDL2/VisualC/external/lib/x86/libpng16-16.dll create mode 100755 src/SDL2/VisualC/external/lib/x86/libtiff-5.dll create mode 100755 src/SDL2/VisualC/external/lib/x86/libwebp-4.dll create mode 100755 src/SDL2/VisualC/external/lib/x86/zlib1.dll create mode 100755 src/SDL2/VisualC/resource.h create mode 100755 src/SDL2/VisualC/showimage/showimage_VS2008.vcproj create mode 100644 src/SDL2/VisualC/showimage/showimage_VS2010.vcxproj create mode 100644 src/SDL2/VisualC/showimage/showimage_VS2012.vcxproj create mode 100644 src/SDL2/VisualCE/SDL_image.dsp create mode 100644 src/SDL2/VisualCE/SDL_image.dsw create mode 100644 src/SDL2/VisualCE/SDL_image.sln create mode 100644 src/SDL2/VisualCE/SDL_image.vcproj create mode 100644 src/SDL2/VisualCE/Version.rc create mode 100644 src/SDL2/VisualCE/clean.sh create mode 100644 src/SDL2/VisualCE/resource.h create mode 100644 src/SDL2/VisualCE/showimage/showimage.dsp create mode 100644 src/SDL2/VisualCE/showimage/showimage.sln create mode 100644 src/SDL2/VisualCE/showimage/showimage.vcproj create mode 100755 src/SDL2/Xcode-iOS/SDL_image.xcodeproj/project.pbxproj create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/decode.h create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/encode.h create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/types.h create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/LICENSE.webp.txt create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Resources/English.lproj/InfoPlist.strings create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Resources/Info.plist create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/decode.h create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/encode.h create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/types.h create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Resources/English.lproj/InfoPlist.strings create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Resources/Info.plist create mode 100755 src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/webp create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/decode.h create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/encode.h create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/types.h create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Resources/English.lproj/InfoPlist.strings create mode 100644 src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Resources/Info.plist create mode 100755 src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/webp create mode 100755 src/SDL2/Xcode/Frameworks/webp.framework/webp create mode 100644 src/SDL2/Xcode/Info-Framework.plist create mode 100755 src/SDL2/Xcode/SDL_image.xcodeproj/project.pbxproj create mode 100755 src/SDL2/Xcode/package create mode 100644 src/SDL2/Xcode/pkg-support/SDL_image.info create mode 100755 src/SDL2/Xcode/pkg-support/codesign-frameworks.sh create mode 100755 src/SDL2/Xcode/pkg-support/mkpackage.sh create mode 100644 src/SDL2/Xcode/pkg-support/resources/ReadMe.txt create mode 100644 src/SDL2/Xcode/pkg-support/resources/Welcome.txt create mode 100644 src/SDL2/Xcode/showimage/English.lproj/InfoPlist.strings create mode 100644 src/SDL2/Xcode/showimage/Info-showimage__Upgraded_.plist create mode 100644 src/SDL2/Xcode/showimage/SDLMain.h create mode 100644 src/SDL2/Xcode/showimage/SDLMain.m create mode 100644 src/SDL2/Xcode/showimage/showimage.xcodeproj/project.pbxproj create mode 100644 src/SDL2/acinclude/libtool.m4 create mode 100644 src/SDL2/acinclude/ltoptions.m4 create mode 100644 src/SDL2/acinclude/ltsugar.m4 create mode 100644 src/SDL2/acinclude/ltversion.m4 create mode 100644 src/SDL2/acinclude/lt~obsolete.m4 create mode 100644 src/SDL2/acinclude/pkg.m4 create mode 100644 src/SDL2/acinclude/sdl2.m4 create mode 100644 src/SDL2/aclocal.m4 create mode 100755 src/SDL2/autogen.sh create mode 100644 src/SDL2/begin_code.h create mode 100644 src/SDL2/close_code.h create mode 100755 src/SDL2/config.guess create mode 100755 src/SDL2/config.sub create mode 100755 src/SDL2/configure create mode 100644 src/SDL2/configure.in create mode 100644 src/SDL2/debian/changelog create mode 100644 src/SDL2/debian/compat create mode 100644 src/SDL2/debian/control create mode 100644 src/SDL2/debian/copyright create mode 100644 src/SDL2/debian/docs create mode 100644 src/SDL2/debian/examples/Makefile create mode 100644 src/SDL2/debian/libsdl2-image-dev.examples create mode 100644 src/SDL2/debian/libsdl2-image-dev.install create mode 100644 src/SDL2/debian/libsdl2-image.install create mode 100644 src/SDL2/debian/libsdl2-image.lintian-overrides create mode 100755 src/SDL2/debian/rules create mode 100644 src/SDL2/debian/source/format create mode 100644 src/SDL2/debian/source/lintian-overrides create mode 100644 src/SDL2/debian/watch create mode 100755 src/SDL2/depcomp create mode 100644 src/SDL2/external/jpeg-9/Android.mk create mode 100644 src/SDL2/external/jpeg-9/Makefile.am create mode 100644 src/SDL2/external/jpeg-9/Makefile.in create mode 100644 src/SDL2/external/jpeg-9/README create mode 100644 src/SDL2/external/jpeg-9/aclocal.m4 create mode 100755 src/SDL2/external/jpeg-9/ar-lib create mode 100644 src/SDL2/external/jpeg-9/cderror.h create mode 100644 src/SDL2/external/jpeg-9/cdjpeg.c create mode 100644 src/SDL2/external/jpeg-9/cdjpeg.h create mode 100644 src/SDL2/external/jpeg-9/change.log create mode 100644 src/SDL2/external/jpeg-9/cjpeg.1 create mode 100644 src/SDL2/external/jpeg-9/cjpeg.c create mode 100644 src/SDL2/external/jpeg-9/ckconfig.c create mode 100644 src/SDL2/external/jpeg-9/coderules.txt create mode 100755 src/SDL2/external/jpeg-9/config.guess create mode 100755 src/SDL2/external/jpeg-9/config.sub create mode 100755 src/SDL2/external/jpeg-9/configure create mode 100644 src/SDL2/external/jpeg-9/configure.ac create mode 100755 src/SDL2/external/jpeg-9/depcomp create mode 100644 src/SDL2/external/jpeg-9/djpeg.1 create mode 100644 src/SDL2/external/jpeg-9/djpeg.c create mode 100644 src/SDL2/external/jpeg-9/example.c create mode 100644 src/SDL2/external/jpeg-9/filelist.txt create mode 100755 src/SDL2/external/jpeg-9/install-sh create mode 100644 src/SDL2/external/jpeg-9/install.txt create mode 100644 src/SDL2/external/jpeg-9/jaricom.c create mode 100644 src/SDL2/external/jpeg-9/jcapimin.c create mode 100644 src/SDL2/external/jpeg-9/jcapistd.c create mode 100644 src/SDL2/external/jpeg-9/jcarith.c create mode 100644 src/SDL2/external/jpeg-9/jccoefct.c create mode 100644 src/SDL2/external/jpeg-9/jccolor.c create mode 100644 src/SDL2/external/jpeg-9/jcdctmgr.c create mode 100644 src/SDL2/external/jpeg-9/jchuff.c create mode 100644 src/SDL2/external/jpeg-9/jcinit.c create mode 100644 src/SDL2/external/jpeg-9/jcmainct.c create mode 100644 src/SDL2/external/jpeg-9/jcmarker.c create mode 100644 src/SDL2/external/jpeg-9/jcmaster.c create mode 100644 src/SDL2/external/jpeg-9/jcomapi.c create mode 100644 src/SDL2/external/jpeg-9/jconfig.bcc create mode 100644 src/SDL2/external/jpeg-9/jconfig.cfg create mode 100644 src/SDL2/external/jpeg-9/jconfig.dj create mode 100644 src/SDL2/external/jpeg-9/jconfig.h create mode 100644 src/SDL2/external/jpeg-9/jconfig.mac create mode 100644 src/SDL2/external/jpeg-9/jconfig.manx create mode 100644 src/SDL2/external/jpeg-9/jconfig.mc6 create mode 100644 src/SDL2/external/jpeg-9/jconfig.sas create mode 100644 src/SDL2/external/jpeg-9/jconfig.st create mode 100644 src/SDL2/external/jpeg-9/jconfig.txt create mode 100644 src/SDL2/external/jpeg-9/jconfig.vc create mode 100644 src/SDL2/external/jpeg-9/jconfig.vms create mode 100644 src/SDL2/external/jpeg-9/jconfig.wat create mode 100644 src/SDL2/external/jpeg-9/jcparam.c create mode 100644 src/SDL2/external/jpeg-9/jcprepct.c create mode 100644 src/SDL2/external/jpeg-9/jcsample.c create mode 100644 src/SDL2/external/jpeg-9/jctrans.c create mode 100644 src/SDL2/external/jpeg-9/jdapimin.c create mode 100644 src/SDL2/external/jpeg-9/jdapistd.c create mode 100644 src/SDL2/external/jpeg-9/jdarith.c create mode 100644 src/SDL2/external/jpeg-9/jdatadst.c create mode 100644 src/SDL2/external/jpeg-9/jdatasrc.c create mode 100644 src/SDL2/external/jpeg-9/jdcoefct.c create mode 100644 src/SDL2/external/jpeg-9/jdcolor.c create mode 100644 src/SDL2/external/jpeg-9/jdct.h create mode 100644 src/SDL2/external/jpeg-9/jddctmgr.c create mode 100644 src/SDL2/external/jpeg-9/jdhuff.c create mode 100644 src/SDL2/external/jpeg-9/jdinput.c create mode 100644 src/SDL2/external/jpeg-9/jdmainct.c create mode 100644 src/SDL2/external/jpeg-9/jdmarker.c create mode 100644 src/SDL2/external/jpeg-9/jdmaster.c create mode 100644 src/SDL2/external/jpeg-9/jdmerge.c create mode 100644 src/SDL2/external/jpeg-9/jdpostct.c create mode 100644 src/SDL2/external/jpeg-9/jdsample.c create mode 100644 src/SDL2/external/jpeg-9/jdtrans.c create mode 100644 src/SDL2/external/jpeg-9/jerror.c create mode 100644 src/SDL2/external/jpeg-9/jerror.h create mode 100644 src/SDL2/external/jpeg-9/jfdctflt.c create mode 100644 src/SDL2/external/jpeg-9/jfdctfst.c create mode 100644 src/SDL2/external/jpeg-9/jfdctint.c create mode 100644 src/SDL2/external/jpeg-9/jidctflt.c create mode 100644 src/SDL2/external/jpeg-9/jidctfst.S create mode 100644 src/SDL2/external/jpeg-9/jidctfst.c create mode 100644 src/SDL2/external/jpeg-9/jidctint.c create mode 100644 src/SDL2/external/jpeg-9/jinclude.h create mode 100644 src/SDL2/external/jpeg-9/jmem-android.c create mode 100644 src/SDL2/external/jpeg-9/jmemansi.c create mode 100644 src/SDL2/external/jpeg-9/jmemdos.c create mode 100644 src/SDL2/external/jpeg-9/jmemdosa.asm create mode 100644 src/SDL2/external/jpeg-9/jmemmac.c create mode 100644 src/SDL2/external/jpeg-9/jmemmgr.c create mode 100644 src/SDL2/external/jpeg-9/jmemname.c create mode 100644 src/SDL2/external/jpeg-9/jmemnobs.c create mode 100644 src/SDL2/external/jpeg-9/jmemsys.h create mode 100644 src/SDL2/external/jpeg-9/jmorecfg.h create mode 100644 src/SDL2/external/jpeg-9/jpegint.h create mode 100644 src/SDL2/external/jpeg-9/jpeglib.h create mode 100644 src/SDL2/external/jpeg-9/jpegtran.1 create mode 100644 src/SDL2/external/jpeg-9/jpegtran.c create mode 100644 src/SDL2/external/jpeg-9/jquant1.c create mode 100644 src/SDL2/external/jpeg-9/jquant2.c create mode 100644 src/SDL2/external/jpeg-9/jutils.c create mode 100644 src/SDL2/external/jpeg-9/jversion.h create mode 100644 src/SDL2/external/jpeg-9/libjpeg.map create mode 100644 src/SDL2/external/jpeg-9/libjpeg.txt create mode 100644 src/SDL2/external/jpeg-9/ltmain.sh create mode 100644 src/SDL2/external/jpeg-9/makcjpeg.st create mode 100644 src/SDL2/external/jpeg-9/makdjpeg.st create mode 100644 src/SDL2/external/jpeg-9/makeadsw.vc6 create mode 100644 src/SDL2/external/jpeg-9/makeasln.v10 create mode 100644 src/SDL2/external/jpeg-9/makecdep.vc6 create mode 100644 src/SDL2/external/jpeg-9/makecdsp.vc6 create mode 100644 src/SDL2/external/jpeg-9/makecfil.v10 create mode 100644 src/SDL2/external/jpeg-9/makecmak.vc6 create mode 100644 src/SDL2/external/jpeg-9/makecvcx.v10 create mode 100644 src/SDL2/external/jpeg-9/makeddep.vc6 create mode 100644 src/SDL2/external/jpeg-9/makeddsp.vc6 create mode 100644 src/SDL2/external/jpeg-9/makedfil.v10 create mode 100644 src/SDL2/external/jpeg-9/makedmak.vc6 create mode 100644 src/SDL2/external/jpeg-9/makedvcx.v10 create mode 100644 src/SDL2/external/jpeg-9/makefile.ansi create mode 100644 src/SDL2/external/jpeg-9/makefile.bcc create mode 100644 src/SDL2/external/jpeg-9/makefile.dj create mode 100644 src/SDL2/external/jpeg-9/makefile.manx create mode 100644 src/SDL2/external/jpeg-9/makefile.mc6 create mode 100644 src/SDL2/external/jpeg-9/makefile.mms create mode 100644 src/SDL2/external/jpeg-9/makefile.sas create mode 100644 src/SDL2/external/jpeg-9/makefile.unix create mode 100644 src/SDL2/external/jpeg-9/makefile.vc create mode 100644 src/SDL2/external/jpeg-9/makefile.vms create mode 100644 src/SDL2/external/jpeg-9/makefile.wat create mode 100644 src/SDL2/external/jpeg-9/makejdep.vc6 create mode 100644 src/SDL2/external/jpeg-9/makejdsp.vc6 create mode 100644 src/SDL2/external/jpeg-9/makejdsw.vc6 create mode 100644 src/SDL2/external/jpeg-9/makejfil.v10 create mode 100644 src/SDL2/external/jpeg-9/makejmak.vc6 create mode 100644 src/SDL2/external/jpeg-9/makejsln.v10 create mode 100644 src/SDL2/external/jpeg-9/makejvcx.v10 create mode 100644 src/SDL2/external/jpeg-9/makeproj.mac create mode 100644 src/SDL2/external/jpeg-9/makerdep.vc6 create mode 100644 src/SDL2/external/jpeg-9/makerdsp.vc6 create mode 100644 src/SDL2/external/jpeg-9/makerfil.v10 create mode 100644 src/SDL2/external/jpeg-9/makermak.vc6 create mode 100644 src/SDL2/external/jpeg-9/makervcx.v10 create mode 100644 src/SDL2/external/jpeg-9/maketdep.vc6 create mode 100644 src/SDL2/external/jpeg-9/maketdsp.vc6 create mode 100644 src/SDL2/external/jpeg-9/maketfil.v10 create mode 100644 src/SDL2/external/jpeg-9/maketmak.vc6 create mode 100644 src/SDL2/external/jpeg-9/maketvcx.v10 create mode 100644 src/SDL2/external/jpeg-9/makewdep.vc6 create mode 100644 src/SDL2/external/jpeg-9/makewdsp.vc6 create mode 100644 src/SDL2/external/jpeg-9/makewfil.v10 create mode 100644 src/SDL2/external/jpeg-9/makewmak.vc6 create mode 100644 src/SDL2/external/jpeg-9/makewvcx.v10 create mode 100644 src/SDL2/external/jpeg-9/makljpeg.st create mode 100644 src/SDL2/external/jpeg-9/maktjpeg.st create mode 100644 src/SDL2/external/jpeg-9/makvms.opt create mode 100755 src/SDL2/external/jpeg-9/missing create mode 100644 src/SDL2/external/jpeg-9/rdbmp.c create mode 100644 src/SDL2/external/jpeg-9/rdcolmap.c create mode 100644 src/SDL2/external/jpeg-9/rdgif.c create mode 100644 src/SDL2/external/jpeg-9/rdjpgcom.1 create mode 100644 src/SDL2/external/jpeg-9/rdjpgcom.c create mode 100644 src/SDL2/external/jpeg-9/rdppm.c create mode 100644 src/SDL2/external/jpeg-9/rdrle.c create mode 100644 src/SDL2/external/jpeg-9/rdswitch.c create mode 100644 src/SDL2/external/jpeg-9/rdtarga.c create mode 100644 src/SDL2/external/jpeg-9/structure.txt create mode 100644 src/SDL2/external/jpeg-9/testimg.bmp create mode 100644 src/SDL2/external/jpeg-9/testimg.jpg create mode 100644 src/SDL2/external/jpeg-9/testimg.ppm create mode 100644 src/SDL2/external/jpeg-9/testimgp.jpg create mode 100644 src/SDL2/external/jpeg-9/testorig.jpg create mode 100644 src/SDL2/external/jpeg-9/testprog.jpg create mode 100644 src/SDL2/external/jpeg-9/transupp.c create mode 100644 src/SDL2/external/jpeg-9/transupp.h create mode 100644 src/SDL2/external/jpeg-9/usage.txt create mode 100644 src/SDL2/external/jpeg-9/wizard.txt create mode 100644 src/SDL2/external/jpeg-9/wrbmp.c create mode 100644 src/SDL2/external/jpeg-9/wrgif.c create mode 100644 src/SDL2/external/jpeg-9/wrjpgcom.1 create mode 100644 src/SDL2/external/jpeg-9/wrjpgcom.c create mode 100644 src/SDL2/external/jpeg-9/wrppm.c create mode 100644 src/SDL2/external/jpeg-9/wrrle.c create mode 100644 src/SDL2/external/jpeg-9/wrtarga.c create mode 100644 src/SDL2/external/libpng-1.6.2/ANNOUNCE create mode 100644 src/SDL2/external/libpng-1.6.2/Android.mk create mode 100644 src/SDL2/external/libpng-1.6.2/CHANGES create mode 100644 src/SDL2/external/libpng-1.6.2/CMakeLists.txt create mode 100644 src/SDL2/external/libpng-1.6.2/INSTALL create mode 100644 src/SDL2/external/libpng-1.6.2/LICENSE create mode 100644 src/SDL2/external/libpng-1.6.2/Makefile.am create mode 100644 src/SDL2/external/libpng-1.6.2/Makefile.in create mode 100644 src/SDL2/external/libpng-1.6.2/README create mode 100644 src/SDL2/external/libpng-1.6.2/TODO create mode 100644 src/SDL2/external/libpng-1.6.2/aclocal.m4 create mode 100644 src/SDL2/external/libpng-1.6.2/arm/arm_init.c create mode 100644 src/SDL2/external/libpng-1.6.2/arm/filter_neon.S create mode 100755 src/SDL2/external/libpng-1.6.2/autogen.sh create mode 100755 src/SDL2/external/libpng-1.6.2/config.guess create mode 100644 src/SDL2/external/libpng-1.6.2/config.h.in create mode 100755 src/SDL2/external/libpng-1.6.2/config.sub create mode 100755 src/SDL2/external/libpng-1.6.2/configure create mode 100644 src/SDL2/external/libpng-1.6.2/configure.ac create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/README.txt create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/examples/README.txt create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/examples/iccfrompng.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/examples/pngpixel.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/examples/pngtopng.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/COPYING create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/LICENSE create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.mingw32 create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.sgi create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.unx create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.w32 create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/README create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/makevms.com create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng.h create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng2.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng2.h create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/readppm.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng-win.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng-x.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng2-win.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng2-x.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/toucan.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/wpng.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/writepng.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/gregbook/writepng.h create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/libtests/fakepng.c create mode 100755 src/SDL2/external/libpng-1.6.2/contrib/libtests/gentests.sh create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/libtests/makepng.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/libtests/pngstest.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/libtests/pngunknown.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/libtests/pngvalid.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/libtests/readpng.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/libtests/tarith.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/libtests/timepng.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/README create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/README create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/makefile create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/pngusr.dfa create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/pngusr.h create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/README create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/makefile create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/pngusr.dfa create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/pngusr.h create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/README create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/makefile create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/pngusr.dfa create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/pngusr.h create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/README create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/makefile.std create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/makefile.tc3 create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/makevms.com create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.bat create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.sh create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/pngminus.bat create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/pngminus.sh create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.bat create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.sh create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/README create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g01.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g02.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g04.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g16.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn2c08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn2c16.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn3p01.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn3p02.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn3p04.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn3p08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn4a08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn4a16.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn6a08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn6a16.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbbn0g01.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbbn0g02.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbbn0g04.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbbn2c16.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbbn3p08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbgn2c16.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbgn3p08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbrn2c08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbwn0g16.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbwn3p08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbyn3p08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp0n0g08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp0n2c08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp0n3p08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp1n3p08.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/tools/README.txt create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/tools/checksum-icc.c create mode 100755 src/SDL2/external/libpng-1.6.2/contrib/tools/chkfmt create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/tools/cvtcolor.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/tools/fixitxt.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/tools/intgamma.sh create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/tools/makesRGB.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/tools/sRGB.h create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/visupng/PngFile.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/visupng/PngFile.h create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/visupng/README.txt create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.c create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.dsp create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.dsw create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.ico create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.png create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.rc create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/visupng/cexcept.h create mode 100644 src/SDL2/external/libpng-1.6.2/contrib/visupng/resource.h create mode 100755 src/SDL2/external/libpng-1.6.2/depcomp create mode 100644 src/SDL2/external/libpng-1.6.2/example.c create mode 100755 src/SDL2/external/libpng-1.6.2/install-sh create mode 100644 src/SDL2/external/libpng-1.6.2/libpng-config.in create mode 100644 src/SDL2/external/libpng-1.6.2/libpng-manual.txt create mode 100644 src/SDL2/external/libpng-1.6.2/libpng.3 create mode 100644 src/SDL2/external/libpng-1.6.2/libpng.pc.in create mode 100644 src/SDL2/external/libpng-1.6.2/libpngpf.3 create mode 100644 src/SDL2/external/libpng-1.6.2/ltmain.sh create mode 100755 src/SDL2/external/libpng-1.6.2/missing create mode 100644 src/SDL2/external/libpng-1.6.2/png.5 create mode 100644 src/SDL2/external/libpng-1.6.2/png.c create mode 100644 src/SDL2/external/libpng-1.6.2/png.h create mode 100644 src/SDL2/external/libpng-1.6.2/pngbar.jpg create mode 100644 src/SDL2/external/libpng-1.6.2/pngbar.png create mode 100644 src/SDL2/external/libpng-1.6.2/pngconf.h create mode 100644 src/SDL2/external/libpng-1.6.2/pngdebug.h create mode 100644 src/SDL2/external/libpng-1.6.2/pngerror.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngget.c create mode 100644 src/SDL2/external/libpng-1.6.2/pnginfo.h create mode 100644 src/SDL2/external/libpng-1.6.2/pnglibconf.h create mode 100644 src/SDL2/external/libpng-1.6.2/pngmem.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngnow.png create mode 100644 src/SDL2/external/libpng-1.6.2/pngpread.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngpriv.h create mode 100644 src/SDL2/external/libpng-1.6.2/pngread.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngrio.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngrtran.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngrutil.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngset.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngstruct.h create mode 100644 src/SDL2/external/libpng-1.6.2/pngtest.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngtest.png create mode 100644 src/SDL2/external/libpng-1.6.2/pngtrans.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngusr.dfa create mode 100644 src/SDL2/external/libpng-1.6.2/pngwio.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngwrite.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngwtran.c create mode 100644 src/SDL2/external/libpng-1.6.2/pngwutil.c create mode 100644 src/SDL2/external/libpng-1.6.2/projects/owatcom/libpng.tgt create mode 100644 src/SDL2/external/libpng-1.6.2/projects/owatcom/libpng.wpj create mode 100644 src/SDL2/external/libpng-1.6.2/projects/owatcom/pngconfig.mak create mode 100644 src/SDL2/external/libpng-1.6.2/projects/owatcom/pngstest.tgt create mode 100644 src/SDL2/external/libpng-1.6.2/projects/owatcom/pngtest.tgt create mode 100644 src/SDL2/external/libpng-1.6.2/projects/owatcom/pngvalid.tgt create mode 100644 src/SDL2/external/libpng-1.6.2/projects/visualc71/PRJ0041.mak create mode 100644 src/SDL2/external/libpng-1.6.2/projects/visualc71/README.txt create mode 100644 src/SDL2/external/libpng-1.6.2/projects/visualc71/README_zlib.txt create mode 100644 src/SDL2/external/libpng-1.6.2/projects/visualc71/libpng.sln create mode 100644 src/SDL2/external/libpng-1.6.2/projects/visualc71/libpng.vcproj create mode 100644 src/SDL2/external/libpng-1.6.2/projects/visualc71/pngtest.vcproj create mode 100644 src/SDL2/external/libpng-1.6.2/projects/visualc71/zlib.vcproj create mode 100644 src/SDL2/external/libpng-1.6.2/projects/vstudio/WARNING create mode 100644 src/SDL2/external/libpng-1.6.2/projects/vstudio/libpng/libpng.vcxproj create mode 100644 src/SDL2/external/libpng-1.6.2/projects/vstudio/pnglibconf/pnglibconf.vcxproj create mode 100644 src/SDL2/external/libpng-1.6.2/projects/vstudio/pngstest/pngstest.vcxproj create mode 100644 src/SDL2/external/libpng-1.6.2/projects/vstudio/pngtest/pngtest.vcxproj create mode 100644 src/SDL2/external/libpng-1.6.2/projects/vstudio/pngunknown/pngunknown.vcxproj create mode 100644 src/SDL2/external/libpng-1.6.2/projects/vstudio/pngvalid/pngvalid.vcxproj create mode 100644 src/SDL2/external/libpng-1.6.2/projects/vstudio/readme.txt create mode 100644 src/SDL2/external/libpng-1.6.2/projects/vstudio/vstudio.sln create mode 100644 src/SDL2/external/libpng-1.6.2/projects/vstudio/zlib.props create mode 100644 src/SDL2/external/libpng-1.6.2/projects/vstudio/zlib/zlib.vcxproj create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/README.txt create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/SCOPTIONS.ppc create mode 100755 src/SDL2/external/libpng-1.6.2/scripts/checksym.awk create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/def.dfn create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/descrip.mms create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/dfn.awk create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/intprefix.dfn create mode 100755 src/SDL2/external/libpng-1.6.2/scripts/libpng-config-body.in create mode 100755 src/SDL2/external/libpng-1.6.2/scripts/libpng-config-head.in create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/libpng.pc.in create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/libtool.m4 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/ltoptions.m4 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/ltsugar.m4 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/ltversion.m4 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/lt~obsolete.m4 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/macro.lst create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.32sunu create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.64sunu create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.acorn create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.aix create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.amiga create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.atari create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.bc32 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.beos create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.bor create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.cegcc create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.darwin create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.dec create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.dj2 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.elf create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.freebsd create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.gcc create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.hp64 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.hpgcc create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.hpux create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.ibmc create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.intel create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.knr create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.linux create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.mips create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.msc create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.msys create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.ne12bsd create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.netbsd create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.openbsd create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.sco create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.sggcc create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.sgi create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.so9 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.solaris create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.solaris-x86 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.std create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.sunos create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.tc3 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makefile.vcwin32 create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/makevms.com create mode 100755 src/SDL2/external/libpng-1.6.2/scripts/options.awk create mode 100755 src/SDL2/external/libpng-1.6.2/scripts/pnglibconf.dfa create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/pnglibconf.h.prebuilt create mode 100755 src/SDL2/external/libpng-1.6.2/scripts/pnglibconf.mak create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/pngwin.rc create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/prefix.dfn create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/smakefile.ppc create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/sym.dfn create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/symbols.def create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/symbols.dfn create mode 100644 src/SDL2/external/libpng-1.6.2/scripts/vers.dfn create mode 100644 src/SDL2/external/libpng-1.6.2/test-driver create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-0g01 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-0g02 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-0g04 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-0g08 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-0g16 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-2c08 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-2c16 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-3p01 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-3p02 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-3p04 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-3p08 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-4a08 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-4a16 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-6a08 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-6a16 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngstest-error create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngtest create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngunknown-IDAT create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngunknown-discard create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngunknown-if-safe create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngunknown-sAPI create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngunknown-sTER create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngunknown-save create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngunknown-vpAg create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-gamma-16-to-8 create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-gamma-alpha-mode create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-gamma-background create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-gamma-expand16-alpha-mode create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-gamma-expand16-background create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-gamma-expand16-transform create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-gamma-sbit create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-gamma-threshold create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-gamma-transform create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-progressive-interlace-size create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-progressive-interlace-standard create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-progressive-interlace-transform create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-progressive-standard create mode 100755 src/SDL2/external/libpng-1.6.2/tests/pngvalid-standard create mode 100644 src/SDL2/external/libwebp-0.3.0/.gitattributes create mode 100644 src/SDL2/external/libwebp-0.3.0/.gitignore create mode 100644 src/SDL2/external/libwebp-0.3.0/.mailmap create mode 100644 src/SDL2/external/libwebp-0.3.0/AUTHORS create mode 100644 src/SDL2/external/libwebp-0.3.0/Android.mk create mode 100644 src/SDL2/external/libwebp-0.3.0/COPYING create mode 100644 src/SDL2/external/libwebp-0.3.0/ChangeLog create mode 100644 src/SDL2/external/libwebp-0.3.0/Makefile.am create mode 100644 src/SDL2/external/libwebp-0.3.0/Makefile.vc create mode 100644 src/SDL2/external/libwebp-0.3.0/NEWS create mode 100644 src/SDL2/external/libwebp-0.3.0/PATENTS create mode 100644 src/SDL2/external/libwebp-0.3.0/README create mode 100644 src/SDL2/external/libwebp-0.3.0/README.mux create mode 100755 src/SDL2/external/libwebp-0.3.0/autogen.sh create mode 100644 src/SDL2/external/libwebp-0.3.0/configure.ac create mode 100644 src/SDL2/external/libwebp-0.3.0/doc/README create mode 100644 src/SDL2/external/libwebp-0.3.0/doc/TODO create mode 100644 src/SDL2/external/libwebp-0.3.0/doc/template.html create mode 100644 src/SDL2/external/libwebp-0.3.0/doc/webp-container-spec.txt create mode 100644 src/SDL2/external/libwebp-0.3.0/doc/webp-lossless-bitstream-spec.txt create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/Makefile.am create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/cwebp.c create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/dwebp.c create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/example_util.c create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/example_util.h create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/gif2webp.c create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/jpegdec.c create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/jpegdec.h create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/metadata.c create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/metadata.h create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/pngdec.c create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/pngdec.h create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/stopwatch.h create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/test.webp create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/test_ref.ppm create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/tiffdec.c create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/tiffdec.h create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/vwebp.c create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/webpmux.c create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/wicdec.c create mode 100644 src/SDL2/external/libwebp-0.3.0/examples/wicdec.h create mode 100755 src/SDL2/external/libwebp-0.3.0/iosbuild.sh create mode 100644 src/SDL2/external/libwebp-0.3.0/m4/.gitignore create mode 100644 src/SDL2/external/libwebp-0.3.0/m4/ax_pthread.m4 create mode 100644 src/SDL2/external/libwebp-0.3.0/makefile.unix create mode 100644 src/SDL2/external/libwebp-0.3.0/man/Makefile.am create mode 100644 src/SDL2/external/libwebp-0.3.0/man/cwebp.1 create mode 100644 src/SDL2/external/libwebp-0.3.0/man/dwebp.1 create mode 100644 src/SDL2/external/libwebp-0.3.0/man/gif2webp.1 create mode 100644 src/SDL2/external/libwebp-0.3.0/man/webpmux.1 create mode 100644 src/SDL2/external/libwebp-0.3.0/src/.gitignore create mode 100644 src/SDL2/external/libwebp-0.3.0/src/Makefile.am create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/Makefile.am create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/alpha.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/buffer.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/decode_vp8.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/frame.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/idec.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/io.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/layer.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/quant.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/tree.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/vp8.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/vp8i.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/vp8l.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/vp8li.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/webp.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dec/webpi.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/demux/Makefile.am create mode 100644 src/SDL2/external/libwebp-0.3.0/src/demux/demux.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/demux/libwebpdemux.pc.in create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/Makefile.am create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/cpu.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/dec.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/dec_neon.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/dec_sse2.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/dsp.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/enc.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/enc_neon.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/enc_sse2.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/lossless.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/lossless.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/upsampling.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/upsampling_neon.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/upsampling_sse2.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/yuv.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/dsp/yuv.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/Makefile.am create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/alpha.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/analysis.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/backward_references.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/backward_references.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/config.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/cost.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/cost.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/filter.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/frame.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/histogram.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/histogram.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/iterator.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/layer.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/picture.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/quant.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/syntax.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/token.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/tree.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/vp8enci.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/vp8l.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/vp8li.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/enc/webpenc.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/libwebp.pc.in create mode 100644 src/SDL2/external/libwebp-0.3.0/src/libwebpdecoder.pc.in create mode 100644 src/SDL2/external/libwebp-0.3.0/src/mux/Makefile.am create mode 100644 src/SDL2/external/libwebp-0.3.0/src/mux/libwebpmux.pc.in create mode 100644 src/SDL2/external/libwebp-0.3.0/src/mux/muxedit.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/mux/muxi.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/mux/muxinternal.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/mux/muxread.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/Makefile.am create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/bit_reader.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/bit_reader.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/bit_writer.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/bit_writer.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/color_cache.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/color_cache.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/filters.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/filters.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/huffman.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/huffman.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/huffman_encode.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/huffman_encode.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/quant_levels.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/quant_levels.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/quant_levels_dec.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/quant_levels_dec.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/rescaler.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/rescaler.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/thread.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/thread.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/utils.c create mode 100644 src/SDL2/external/libwebp-0.3.0/src/utils/utils.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/webp/decode.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/webp/demux.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/webp/encode.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/webp/format_constants.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/webp/mux.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/webp/mux_types.h create mode 100644 src/SDL2/external/libwebp-0.3.0/src/webp/types.h create mode 100644 src/SDL2/external/libwebp-0.3.0/swig/README create mode 100644 src/SDL2/external/libwebp-0.3.0/swig/libwebp.i create mode 100644 src/SDL2/external/libwebp-0.3.0/swig/libwebp.jar create mode 100644 src/SDL2/external/libwebp-0.3.0/swig/libwebp.py create mode 100644 src/SDL2/external/libwebp-0.3.0/swig/libwebp_java_wrap.c create mode 100644 src/SDL2/external/libwebp-0.3.0/swig/libwebp_python_wrap.c create mode 100644 src/SDL2/external/libwebp-0.3.0/swig/setup.py create mode 100644 src/SDL2/external/tiff-4.0.3/COPYRIGHT create mode 100644 src/SDL2/external/tiff-4.0.3/ChangeLog create mode 100644 src/SDL2/external/tiff-4.0.3/HOWTO-RELEASE create mode 100644 src/SDL2/external/tiff-4.0.3/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/Makefile.vc create mode 100644 src/SDL2/external/tiff-4.0.3/README create mode 100644 src/SDL2/external/tiff-4.0.3/README.vms create mode 100644 src/SDL2/external/tiff-4.0.3/RELEASE-DATE create mode 100644 src/SDL2/external/tiff-4.0.3/SConstruct create mode 100644 src/SDL2/external/tiff-4.0.3/TODO create mode 100644 src/SDL2/external/tiff-4.0.3/VERSION create mode 100644 src/SDL2/external/tiff-4.0.3/aclocal.m4 create mode 100755 src/SDL2/external/tiff-4.0.3/autogen.sh create mode 100644 src/SDL2/external/tiff-4.0.3/build/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/build/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/build/README create mode 100755 src/SDL2/external/tiff-4.0.3/config/compile create mode 100755 src/SDL2/external/tiff-4.0.3/config/config.guess create mode 100755 src/SDL2/external/tiff-4.0.3/config/config.sub create mode 100755 src/SDL2/external/tiff-4.0.3/config/depcomp create mode 100755 src/SDL2/external/tiff-4.0.3/config/install-sh create mode 100644 src/SDL2/external/tiff-4.0.3/config/ltmain.sh create mode 100755 src/SDL2/external/tiff-4.0.3/config/missing create mode 100755 src/SDL2/external/tiff-4.0.3/config/mkinstalldirs create mode 100755 src/SDL2/external/tiff-4.0.3/config/test-driver create mode 100755 src/SDL2/external/tiff-4.0.3/configure create mode 100644 src/SDL2/external/tiff-4.0.3/configure.ac create mode 100644 src/SDL2/external/tiff-4.0.3/configure.com create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/README create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/addtiffo/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/addtiffo/Makefile.in create mode 100755 src/SDL2/external/tiff-4.0.3/contrib/addtiffo/Makefile.vc create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/addtiffo/README create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/addtiffo/addtiffo.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/addtiffo/tif_overview.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/addtiffo/tif_ovrcache.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/addtiffo/tif_ovrcache.h create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/README create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/tiff-bi.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/tiff-grayscale.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/tiff-palette.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/tiff-rgb.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/xtiff/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/xtiff/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/xtiff/README create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/xtiff/patchlevel.h create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/xtiff/xtiff.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/dbs/xtiff/xtifficon.h create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/iptcutil/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/iptcutil/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/iptcutil/README create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/iptcutil/iptcutil.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/iptcutil/test.iptc create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/iptcutil/test.txt create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/mfs/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/mfs/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/mfs/README create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/mfs/mfs_file.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/pds/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/pds/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/pds/README create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/pds/tif_imageiter.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/pds/tif_imageiter.h create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/pds/tif_pdsdirread.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/pds/tif_pdsdirwrite.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/ras/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/ras/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/ras/README create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/ras/ras2tif.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/ras/tif2ras.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/stream/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/stream/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/stream/README create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/stream/tiffstream.cpp create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/stream/tiffstream.h create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/tags/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/tags/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/tags/README create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/tags/listtif.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/tags/maketif.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/tags/xtif_dir.c create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/tags/xtiffio.h create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/tags/xtiffiop.h create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/win_dib/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/win_dib/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/win_dib/Makefile.w95 create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/win_dib/README.Tiffile create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/win_dib/README.tiff2dib create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/win_dib/Tiffile.cpp create mode 100644 src/SDL2/external/tiff-4.0.3/contrib/win_dib/tiff2dib.c create mode 100644 src/SDL2/external/tiff-4.0.3/html/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/html/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/html/TIFFTechNote2.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/addingtags.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/bugs.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/build.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/contrib.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/document.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/images.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/back.gif create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/bali.jpg create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/cat.gif create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/cover.jpg create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/cramps.gif create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/dave.gif create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/info.gif create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/jello.jpg create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/jim.gif create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/note.gif create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/oxford.gif create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/quad.jpg create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/ring.gif create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/smallliz.jpg create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/strike.gif create mode 100644 src/SDL2/external/tiff-4.0.3/html/images/warning.gif create mode 100644 src/SDL2/external/tiff-4.0.3/html/index.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/internals.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/intro.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/libtiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFClose.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFDataWidth.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFError.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldDataType.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldName.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldPassCount.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldReadCount.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldTag.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldWriteCount.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFFlush.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFGetField.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFOpen.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFPrintDirectory.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFRGBAImage.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFReadDirectory.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFReadEncodedStrip.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFReadEncodedTile.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBAImage.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBAStrip.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBATile.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRawStrip.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRawTile.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFReadScanline.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFReadTile.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFSetDirectory.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFSetField.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFWarning.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteDirectory.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteEncodedStrip.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteEncodedTile.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteRawStrip.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteRawTile.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteScanline.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteTile.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFbuffer.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFcodec.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFcolor.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFmemory.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFquery.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFsize.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFstrip.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFswab.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/TIFFtile.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/bmp2tiff.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/fax2ps.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/fax2tiff.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/gif2tiff.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/index.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/libtiff.3tiff.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/pal2rgb.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/ppm2tiff.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/ras2tiff.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/raw2tiff.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/rgb2ycbcr.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/sgi2tiff.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/thumbnail.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiff2bw.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiff2pdf.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiff2ps.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiff2rgba.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiffcmp.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiffcp.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiffcrop.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiffdither.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiffdump.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiffgt.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiffinfo.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiffmedian.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiffset.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiffsplit.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/man/tiffsv.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/misc.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/support.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/tools.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta007.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta016.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta018.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta024.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta028.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta029.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta031.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta032.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta033.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta034.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta035.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.4beta036.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.5.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.5.2.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.5.3.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.5.4.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.5.5.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.5.6-beta.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.5.7.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.6.0.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.6.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.7.0.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.7.0alpha.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.7.0beta.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.7.0beta2.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.7.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.7.2.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.7.3.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.7.4.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.8.0.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.8.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.8.2.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.9.0beta.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.9.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v3.9.2.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v4.0.0.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v4.0.1.html create mode 100644 src/SDL2/external/tiff-4.0.3/html/v4.0.2.html create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff-4.pc.in create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/Makefile.vc create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/SConstruct create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/libtiff.def create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/libtiff.map create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/libtiffxx.map create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/mkg3states.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/t4.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_aux.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_close.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_codec.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_color.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_compress.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_config.h-vms create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_config.h.in create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_config.vc.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_config.wince.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_dir.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_dir.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_dirinfo.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_dirread.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_dirwrite.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_dumpmode.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_error.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_extension.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3sm.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_flush.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_getimage.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_jbig.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_jpeg.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_jpeg_12.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_luv.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_lzma.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_lzw.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_next.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_ojpeg.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_open.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_packbits.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_pixarlog.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_predict.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_predict.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_print.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_read.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_stream.cxx create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_strip.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_swab.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_thunder.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_tile.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_unix.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_version.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_warning.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_win32.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_write.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tif_zip.c create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tiff.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.h.in create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.vc.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.wince.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tiffio.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tiffio.hxx create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tiffiop.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/tiffvers.h create mode 100644 src/SDL2/external/tiff-4.0.3/libtiff/uvcode.h create mode 100644 src/SDL2/external/tiff-4.0.3/m4/acinclude.m4 create mode 100644 src/SDL2/external/tiff-4.0.3/m4/libtool.m4 create mode 100644 src/SDL2/external/tiff-4.0.3/m4/ltoptions.m4 create mode 100644 src/SDL2/external/tiff-4.0.3/m4/ltsugar.m4 create mode 100644 src/SDL2/external/tiff-4.0.3/m4/ltversion.m4 create mode 100644 src/SDL2/external/tiff-4.0.3/m4/lt~obsolete.m4 create mode 100644 src/SDL2/external/tiff-4.0.3/man/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/man/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFClose.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFDataWidth.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFError.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFFieldDataType.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFFieldName.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFFieldPassCount.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFFieldReadCount.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFFieldTag.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFFieldWriteCount.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFFlush.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFGetField.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFOpen.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFPrintDirectory.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFRGBAImage.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFReadDirectory.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFReadEncodedStrip.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFReadEncodedTile.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBAImage.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBAStrip.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBATile.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFReadRawStrip.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFReadRawTile.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFReadScanline.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFReadTile.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFSetDirectory.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFSetField.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFWarning.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFWriteDirectory.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFWriteEncodedStrip.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFWriteEncodedTile.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFWriteRawStrip.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFWriteRawTile.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFWriteScanline.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFWriteTile.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFbuffer.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFcodec.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFcolor.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFmemory.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFquery.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFsize.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFstrip.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFswab.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/TIFFtile.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/bmp2tiff.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/fax2ps.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/fax2tiff.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/gif2tiff.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/libtiff.3tiff create mode 100644 src/SDL2/external/tiff-4.0.3/man/pal2rgb.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/ppm2tiff.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/ras2tiff.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/raw2tiff.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/rgb2ycbcr.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/sgi2tiff.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/thumbnail.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiff2bw.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiff2pdf.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiff2ps.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiff2rgba.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiffcmp.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiffcp.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiffcrop.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiffdither.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiffdump.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiffgt.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiffinfo.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiffmedian.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiffset.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiffsplit.1 create mode 100644 src/SDL2/external/tiff-4.0.3/man/tiffsv.1 create mode 100644 src/SDL2/external/tiff-4.0.3/nmake.opt create mode 100644 src/SDL2/external/tiff-4.0.3/port/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/port/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/port/Makefile.vc create mode 100644 src/SDL2/external/tiff-4.0.3/port/dummy.c create mode 100644 src/SDL2/external/tiff-4.0.3/port/getopt.c create mode 100644 src/SDL2/external/tiff-4.0.3/port/lfind.c create mode 100644 src/SDL2/external/tiff-4.0.3/port/libport.h create mode 100644 src/SDL2/external/tiff-4.0.3/port/strcasecmp.c create mode 100644 src/SDL2/external/tiff-4.0.3/port/strtoul.c create mode 100644 src/SDL2/external/tiff-4.0.3/port/strtoull.c create mode 100644 src/SDL2/external/tiff-4.0.3/test/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/test/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/test/ascii_tag.c create mode 100755 src/SDL2/external/tiff-4.0.3/test/bmp2tiff_palette.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/bmp2tiff_rgb.sh create mode 100644 src/SDL2/external/tiff-4.0.3/test/check_tag.c create mode 100644 src/SDL2/external/tiff-4.0.3/test/common.sh create mode 100644 src/SDL2/external/tiff-4.0.3/test/custom_dir.c create mode 100755 src/SDL2/external/tiff-4.0.3/test/gif2tiff.sh create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/README.txt create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/logluv-3c-16b.tiff create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/minisblack-1c-16b.tiff create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/minisblack-1c-8b.pgm create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/minisblack-1c-8b.tiff create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/minisblack-2c-8b-alpha.tiff create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/miniswhite-1c-1b.pbm create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/miniswhite-1c-1b.tiff create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/palette-1c-1b.tiff create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/palette-1c-4b.tiff create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/palette-1c-8b.bmp create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/palette-1c-8b.gif create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/palette-1c-8b.tiff create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/quad-tile.jpg.tiff create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/rgb-3c-16b.tiff create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/rgb-3c-8b.bmp create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/rgb-3c-8b.ppm create mode 100644 src/SDL2/external/tiff-4.0.3/test/images/rgb-3c-8b.tiff create mode 100644 src/SDL2/external/tiff-4.0.3/test/long_tag.c create mode 100755 src/SDL2/external/tiff-4.0.3/test/ppm2tiff_pbm.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/ppm2tiff_pgm.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/ppm2tiff_ppm.sh create mode 100644 src/SDL2/external/tiff-4.0.3/test/raw_decode.c create mode 100644 src/SDL2/external/tiff-4.0.3/test/rewrite_tag.c create mode 100644 src/SDL2/external/tiff-4.0.3/test/short_tag.c create mode 100644 src/SDL2/external/tiff-4.0.3/test/strip.c create mode 100644 src/SDL2/external/tiff-4.0.3/test/strip_rw.c create mode 100644 src/SDL2/external/tiff-4.0.3/test/test_arrays.c create mode 100644 src/SDL2/external/tiff-4.0.3/test/test_arrays.h create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2pdf.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2ps-EPS1.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS1.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS2.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS3.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2rgba-logluv-3c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-1c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-1c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-2c-8b-alpha.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2rgba-miniswhite-1c-1b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-1b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-4b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2rgba-quad-tile.jpg.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2rgba-rgb-3c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiff2rgba-rgb-3c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-1d-fill.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-1d.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-2d-fill.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-2d.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcp-g3.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcp-g4.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcp-logluv.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcp-split-join.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcp-split.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcp-thumbnail.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-logluv-3c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-1c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-1c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-2c-8b-alpha.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-miniswhite-1c-1b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-1b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-4b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-rgb-3c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-rgb-3c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-logluv-3c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-1c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-1c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-miniswhite-1c-1b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-1b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-4b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-rgb-3c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-rgb-3c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-logluv-3c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-1c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-1c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-2c-8b-alpha.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-miniswhite-1c-1b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-1b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-4b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-rgb-3c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-rgb-3c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-logluv-3c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-1c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-1c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-2c-8b-alpha.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-miniswhite-1c-1b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-1b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-4b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-rgb-3c-16b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-rgb-3c-8b.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffdump.sh create mode 100755 src/SDL2/external/tiff-4.0.3/test/tiffinfo.sh create mode 100644 src/SDL2/external/tiff-4.0.3/test/tifftest.h create mode 100644 src/SDL2/external/tiff-4.0.3/tools/Makefile.am create mode 100644 src/SDL2/external/tiff-4.0.3/tools/Makefile.in create mode 100644 src/SDL2/external/tiff-4.0.3/tools/Makefile.vc create mode 100644 src/SDL2/external/tiff-4.0.3/tools/bmp2tiff.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/fax2ps.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/fax2tiff.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/gif2tiff.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/pal2rgb.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/ppm2tiff.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/ras2tiff.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/rasterfile.h create mode 100644 src/SDL2/external/tiff-4.0.3/tools/raw2tiff.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/rgb2ycbcr.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/sgi2tiff.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/sgisv.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/thumbnail.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiff2bw.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiff2pdf.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiff2ps.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiff2rgba.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiffcmp.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiffcp.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiffcrop.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiffdither.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiffdump.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiffgt.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiffinfo.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiffmedian.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiffset.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/tiffsplit.c create mode 100644 src/SDL2/external/tiff-4.0.3/tools/ycbcr.c create mode 100644 src/SDL2/external/zlib-1.2.8/CMakeLists.txt create mode 100644 src/SDL2/external/zlib-1.2.8/ChangeLog create mode 100644 src/SDL2/external/zlib-1.2.8/FAQ create mode 100644 src/SDL2/external/zlib-1.2.8/INDEX create mode 100644 src/SDL2/external/zlib-1.2.8/Makefile.in create mode 100644 src/SDL2/external/zlib-1.2.8/README create mode 100644 src/SDL2/external/zlib-1.2.8/adler32.c create mode 100644 src/SDL2/external/zlib-1.2.8/amiga/Makefile.pup create mode 100644 src/SDL2/external/zlib-1.2.8/amiga/Makefile.sas create mode 100644 src/SDL2/external/zlib-1.2.8/as400/bndsrc create mode 100644 src/SDL2/external/zlib-1.2.8/as400/compile.clp create mode 100644 src/SDL2/external/zlib-1.2.8/as400/readme.txt create mode 100644 src/SDL2/external/zlib-1.2.8/as400/zlib.inc create mode 100644 src/SDL2/external/zlib-1.2.8/compress.c create mode 100755 src/SDL2/external/zlib-1.2.8/configure create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/README.contrib create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/buffer_demo.adb create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/mtest.adb create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/read.adb create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/readme.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/test.adb create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-streams.adb create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-streams.ads create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-thin.adb create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-thin.ads create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.adb create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.ads create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.gpr create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/amd64/amd64-match.S create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/asm686/README.686 create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/asm686/match.S create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/blast/README create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/blast/blast.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/blast/blast.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/blast/test.pk create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/blast/test.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/delphi/ZLib.pas create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/delphi/ZLibConst.pas create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/delphi/readme.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/delphi/zlibd32.mak create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib.build create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib.chm create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib.sln create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/AssemblyInfo.cs create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/ChecksumImpl.cs create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/CircularBuffer.cs create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/CodecBase.cs create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/Deflater.cs create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.cs create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.csproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/GZipStream.cs create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/Inflater.cs create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/UnitTests.cs create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/LICENSE_1_0.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/dotzlib/readme.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/gcc_gvmat64/gvmat64.S create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/infback9/README create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/infback9/infback9.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/infback9/infback9.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/infback9/inffix9.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/infback9/inflate9.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/infback9/inftree9.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/infback9/inftree9.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/inflate86/inffas86.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/inflate86/inffast.S create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/iostream/test.cpp create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/iostream/zfstream.cpp create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/iostream/zfstream.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/iostream2/zstream.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/iostream2/zstream_test.cpp create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/iostream3/README create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/iostream3/TODO create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/iostream3/test.cc create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/iostream3/zfstream.cc create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/iostream3/zfstream.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/masmx64/bld_ml64.bat create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/masmx64/gvmat64.asm create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/masmx64/inffas8664.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/masmx64/inffasx64.asm create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/masmx64/readme.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/masmx86/bld_ml32.bat create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/masmx86/inffas32.asm create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/masmx86/match686.asm create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/masmx86/readme.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/Makefile.am create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/MiniZip64_Changes.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/MiniZip64_info.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/configure.ac create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/crypt.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/ioapi.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/ioapi.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/iowin32.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/iowin32.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/make_vms.com create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/miniunz.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/miniunzip.1 create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.1 create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.pc.in create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/mztools.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/mztools.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/unzip.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/unzip.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/zip.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/minizip/zip.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/pascal/example.pas create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/pascal/readme.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/pascal/zlibd32.mak create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/pascal/zlibpas.pas create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/puff/README create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/puff/puff.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/puff/puff.h create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/puff/pufftest.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/puff/zeros.raw create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/testzlib/testzlib.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/testzlib/testzlib.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/untgz/Makefile.msc create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/untgz/untgz.c create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/readme.txt create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj.filters create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj.filters create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj.filters create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj.filters create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlib.rc create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj.filters create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.def create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.sln create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj.filters create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/miniunz.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/minizip.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/testzlib.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/testzlibdll.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlib.rc create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibstat.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.def create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.sln create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.vcxproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/miniunz.vcproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/minizip.vcproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/testzlib.vcproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/testzlibdll.vcproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlib.rc create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibstat.vcproj create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.def create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.sln create mode 100644 src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.vcproj create mode 100644 src/SDL2/external/zlib-1.2.8/crc32.c create mode 100644 src/SDL2/external/zlib-1.2.8/crc32.h create mode 100644 src/SDL2/external/zlib-1.2.8/deflate.c create mode 100644 src/SDL2/external/zlib-1.2.8/deflate.h create mode 100644 src/SDL2/external/zlib-1.2.8/doc/algorithm.txt create mode 100644 src/SDL2/external/zlib-1.2.8/doc/rfc1950.txt create mode 100644 src/SDL2/external/zlib-1.2.8/doc/rfc1951.txt create mode 100644 src/SDL2/external/zlib-1.2.8/doc/rfc1952.txt create mode 100644 src/SDL2/external/zlib-1.2.8/doc/txtvsbin.txt create mode 100644 src/SDL2/external/zlib-1.2.8/examples/README.examples create mode 100644 src/SDL2/external/zlib-1.2.8/examples/enough.c create mode 100644 src/SDL2/external/zlib-1.2.8/examples/fitblk.c create mode 100644 src/SDL2/external/zlib-1.2.8/examples/gun.c create mode 100644 src/SDL2/external/zlib-1.2.8/examples/gzappend.c create mode 100644 src/SDL2/external/zlib-1.2.8/examples/gzjoin.c create mode 100644 src/SDL2/external/zlib-1.2.8/examples/gzlog.c create mode 100644 src/SDL2/external/zlib-1.2.8/examples/gzlog.h create mode 100644 src/SDL2/external/zlib-1.2.8/examples/zlib_how.html create mode 100644 src/SDL2/external/zlib-1.2.8/examples/zpipe.c create mode 100644 src/SDL2/external/zlib-1.2.8/examples/zran.c create mode 100644 src/SDL2/external/zlib-1.2.8/gzclose.c create mode 100644 src/SDL2/external/zlib-1.2.8/gzguts.h create mode 100644 src/SDL2/external/zlib-1.2.8/gzlib.c create mode 100644 src/SDL2/external/zlib-1.2.8/gzread.c create mode 100644 src/SDL2/external/zlib-1.2.8/gzwrite.c create mode 100644 src/SDL2/external/zlib-1.2.8/infback.c create mode 100644 src/SDL2/external/zlib-1.2.8/inffast.c create mode 100644 src/SDL2/external/zlib-1.2.8/inffast.h create mode 100644 src/SDL2/external/zlib-1.2.8/inffixed.h create mode 100644 src/SDL2/external/zlib-1.2.8/inflate.c create mode 100644 src/SDL2/external/zlib-1.2.8/inflate.h create mode 100644 src/SDL2/external/zlib-1.2.8/inftrees.c create mode 100644 src/SDL2/external/zlib-1.2.8/inftrees.h create mode 100644 src/SDL2/external/zlib-1.2.8/make-cross-x64.sh create mode 100644 src/SDL2/external/zlib-1.2.8/make-cross-x86.sh create mode 100644 src/SDL2/external/zlib-1.2.8/make_vms.com create mode 100644 src/SDL2/external/zlib-1.2.8/msdos/Makefile.bor create mode 100644 src/SDL2/external/zlib-1.2.8/msdos/Makefile.dj2 create mode 100644 src/SDL2/external/zlib-1.2.8/msdos/Makefile.emx create mode 100644 src/SDL2/external/zlib-1.2.8/msdos/Makefile.msc create mode 100644 src/SDL2/external/zlib-1.2.8/msdos/Makefile.tc create mode 100644 src/SDL2/external/zlib-1.2.8/nintendods/README create mode 100644 src/SDL2/external/zlib-1.2.8/old/Makefile.emx create mode 100644 src/SDL2/external/zlib-1.2.8/old/Makefile.riscos create mode 100644 src/SDL2/external/zlib-1.2.8/old/README create mode 100644 src/SDL2/external/zlib-1.2.8/old/descrip.mms create mode 100644 src/SDL2/external/zlib-1.2.8/old/os2/Makefile.os2 create mode 100644 src/SDL2/external/zlib-1.2.8/old/os2/zlib.def create mode 100644 src/SDL2/external/zlib-1.2.8/old/visual-basic.txt create mode 100644 src/SDL2/external/zlib-1.2.8/qnx/package.qpg create mode 100644 src/SDL2/external/zlib-1.2.8/test/example.c create mode 100644 src/SDL2/external/zlib-1.2.8/test/infcover.c create mode 100644 src/SDL2/external/zlib-1.2.8/test/minigzip.c create mode 100644 src/SDL2/external/zlib-1.2.8/treebuild.xml create mode 100644 src/SDL2/external/zlib-1.2.8/trees.c create mode 100644 src/SDL2/external/zlib-1.2.8/trees.h create mode 100644 src/SDL2/external/zlib-1.2.8/uncompr.c create mode 100644 src/SDL2/external/zlib-1.2.8/watcom/watcom_f.mak create mode 100644 src/SDL2/external/zlib-1.2.8/watcom/watcom_l.mak create mode 100644 src/SDL2/external/zlib-1.2.8/win32/DLL_FAQ.txt create mode 100644 src/SDL2/external/zlib-1.2.8/win32/Makefile.bor create mode 100644 src/SDL2/external/zlib-1.2.8/win32/Makefile.gcc create mode 100644 src/SDL2/external/zlib-1.2.8/win32/Makefile.msc create mode 100644 src/SDL2/external/zlib-1.2.8/win32/README-WIN32.txt create mode 100644 src/SDL2/external/zlib-1.2.8/win32/VisualC.txt create mode 100644 src/SDL2/external/zlib-1.2.8/win32/zlib.def create mode 100644 src/SDL2/external/zlib-1.2.8/win32/zlib1.rc create mode 100644 src/SDL2/external/zlib-1.2.8/zconf.h create mode 100644 src/SDL2/external/zlib-1.2.8/zconf.h.cmakein create mode 100644 src/SDL2/external/zlib-1.2.8/zconf.h.in create mode 100644 src/SDL2/external/zlib-1.2.8/zlib.3 create mode 100644 src/SDL2/external/zlib-1.2.8/zlib.3.pdf create mode 100644 src/SDL2/external/zlib-1.2.8/zlib.h create mode 100644 src/SDL2/external/zlib-1.2.8/zlib.map create mode 100644 src/SDL2/external/zlib-1.2.8/zlib.pc.cmakein create mode 100644 src/SDL2/external/zlib-1.2.8/zlib.pc.in create mode 100755 src/SDL2/external/zlib-1.2.8/zlib2ansi create mode 100644 src/SDL2/external/zlib-1.2.8/zutil.c create mode 100644 src/SDL2/external/zlib-1.2.8/zutil.h create mode 100755 src/SDL2/gcc-fat.sh create mode 100755 src/SDL2/install-sh create mode 100644 src/SDL2/ltmain.sh create mode 100644 src/SDL2/miniz.h create mode 100755 src/SDL2/missing create mode 100644 src/SDL2/showimage.c create mode 100644 src/SDL2/version.rc diff --git a/src/SDL2/Android.mk b/src/SDL2/Android.mk new file mode 100644 index 000000000..c2080dd7a --- /dev/null +++ b/src/SDL2/Android.mk @@ -0,0 +1,121 @@ +LOCAL_PATH := $(call my-dir) + +include $(CLEAR_VARS) + +LOCAL_MODULE := SDL2_image + +# Enable this if you want to support loading JPEG images +# The library path should be a relative path to this directory. +SUPPORT_JPG := true +JPG_LIBRARY_PATH := external/jpeg-9 + +# Enable this if you want to support loading PNG images +# The library path should be a relative path to this directory. +SUPPORT_PNG := true +PNG_LIBRARY_PATH := external/libpng-1.6.2 + +# Enable this if you want to support loading WebP images +# The library path should be a relative path to this directory. +SUPPORT_WEBP := true +WEBP_LIBRARY_PATH := external/libwebp-0.3.0 + + +LOCAL_C_INCLUDES := $(LOCAL_PATH) +LOCAL_CFLAGS := -DLOAD_BMP -DLOAD_GIF -DLOAD_LBM -DLOAD_PCX -DLOAD_PNM \ + -DLOAD_TGA -DLOAD_XCF -DLOAD_XPM -DLOAD_XV +LOCAL_CFLAGS += -O3 -fstrict-aliasing -fprefetch-loop-arrays + +LOCAL_SRC_FILES := $(notdir $(filter-out %/showimage.c, $(wildcard $(LOCAL_PATH)/*.c))) + +LOCAL_LDLIBS := +LOCAL_STATIC_LIBRARIES := +LOCAL_SHARED_LIBRARIES := SDL2 + +ifeq ($(SUPPORT_JPG),true) + LOCAL_C_INCLUDES += $(LOCAL_PATH)/$(JPG_LIBRARY_PATH) + LOCAL_CFLAGS += -DLOAD_JPG + # We can include the sources directly so the user doesn't have to... + #LOCAL_STATIC_LIBRARIES += jpeg + LOCAL_CFLAGS += -DAVOID_TABLES + LOCAL_SRC_FILES += \ + $(JPG_LIBRARY_PATH)/jaricom.c \ + $(JPG_LIBRARY_PATH)/jcapimin.c \ + $(JPG_LIBRARY_PATH)/jcapistd.c \ + $(JPG_LIBRARY_PATH)/jcarith.c \ + $(JPG_LIBRARY_PATH)/jccoefct.c \ + $(JPG_LIBRARY_PATH)/jccolor.c \ + $(JPG_LIBRARY_PATH)/jcdctmgr.c \ + $(JPG_LIBRARY_PATH)/jchuff.c \ + $(JPG_LIBRARY_PATH)/jcinit.c \ + $(JPG_LIBRARY_PATH)/jcmainct.c \ + $(JPG_LIBRARY_PATH)/jcmarker.c \ + $(JPG_LIBRARY_PATH)/jcmaster.c \ + $(JPG_LIBRARY_PATH)/jcomapi.c \ + $(JPG_LIBRARY_PATH)/jcparam.c \ + $(JPG_LIBRARY_PATH)/jcprepct.c \ + $(JPG_LIBRARY_PATH)/jcsample.c \ + $(JPG_LIBRARY_PATH)/jctrans.c \ + $(JPG_LIBRARY_PATH)/jdapimin.c \ + $(JPG_LIBRARY_PATH)/jdapistd.c \ + $(JPG_LIBRARY_PATH)/jdarith.c \ + $(JPG_LIBRARY_PATH)/jdatadst.c \ + $(JPG_LIBRARY_PATH)/jdatasrc.c \ + $(JPG_LIBRARY_PATH)/jdcoefct.c \ + $(JPG_LIBRARY_PATH)/jdcolor.c \ + $(JPG_LIBRARY_PATH)/jddctmgr.c \ + $(JPG_LIBRARY_PATH)/jdhuff.c \ + $(JPG_LIBRARY_PATH)/jdinput.c \ + $(JPG_LIBRARY_PATH)/jdmainct.c \ + $(JPG_LIBRARY_PATH)/jdmarker.c \ + $(JPG_LIBRARY_PATH)/jdmaster.c \ + $(JPG_LIBRARY_PATH)/jdmerge.c \ + $(JPG_LIBRARY_PATH)/jdpostct.c \ + $(JPG_LIBRARY_PATH)/jdsample.c \ + $(JPG_LIBRARY_PATH)/jdtrans.c \ + $(JPG_LIBRARY_PATH)/jerror.c \ + $(JPG_LIBRARY_PATH)/jfdctflt.c \ + $(JPG_LIBRARY_PATH)/jfdctfst.c \ + $(JPG_LIBRARY_PATH)/jfdctint.c \ + $(JPG_LIBRARY_PATH)/jidctflt.c \ + $(JPG_LIBRARY_PATH)/jidctfst.S \ + $(JPG_LIBRARY_PATH)/jidctint.c \ + $(JPG_LIBRARY_PATH)/jquant1.c \ + $(JPG_LIBRARY_PATH)/jquant2.c \ + $(JPG_LIBRARY_PATH)/jutils.c \ + $(JPG_LIBRARY_PATH)/jmemmgr.c \ + $(JPG_LIBRARY_PATH)/jmem-android.c +endif + +ifeq ($(SUPPORT_PNG),true) + LOCAL_C_INCLUDES += $(LOCAL_PATH)/$(PNG_LIBRARY_PATH) + LOCAL_CFLAGS += -DLOAD_PNG + # We can include the sources directly so the user doesn't have to... + #LOCAL_STATIC_LIBRARIES += png + LOCAL_SRC_FILES += \ + $(PNG_LIBRARY_PATH)/png.c \ + $(PNG_LIBRARY_PATH)/pngerror.c \ + $(PNG_LIBRARY_PATH)/pngget.c \ + $(PNG_LIBRARY_PATH)/pngmem.c \ + $(PNG_LIBRARY_PATH)/pngpread.c \ + $(PNG_LIBRARY_PATH)/pngread.c \ + $(PNG_LIBRARY_PATH)/pngrio.c \ + $(PNG_LIBRARY_PATH)/pngrtran.c \ + $(PNG_LIBRARY_PATH)/pngrutil.c \ + $(PNG_LIBRARY_PATH)/pngset.c \ + $(PNG_LIBRARY_PATH)/pngtrans.c \ + $(PNG_LIBRARY_PATH)/pngwio.c \ + $(PNG_LIBRARY_PATH)/pngwrite.c \ + $(PNG_LIBRARY_PATH)/pngwtran.c \ + $(PNG_LIBRARY_PATH)/pngwutil.c + LOCAL_LDLIBS += -lz +endif + +ifeq ($(SUPPORT_WEBP),true) + LOCAL_C_INCLUDES += $(LOCAL_PATH)/$(WEBP_LIBRARY_PATH)/src + LOCAL_CFLAGS += -DLOAD_WEBP + LOCAL_STATIC_LIBRARIES += webp +endif + +LOCAL_EXPORT_C_INCLUDES += $(LOCAL_C_INCLUDES) + +include $(BUILD_SHARED_LIBRARY) diff --git a/src/SDL2/CHANGES.txt b/src/SDL2/CHANGES.txt new file mode 100644 index 000000000..cc174e268 --- /dev/null +++ b/src/SDL2/CHANGES.txt @@ -0,0 +1,114 @@ +2.0.0: +Sam Lantinga - Sun Jun 2 22:25:31 PDT 2013 + * Added PNG save support based on miniz.c by Rich Geldreich + IMG_SavePNG(), IMG_SavePNG_RW() +Sam Lantinga - Sat Jun 1 19:11:26 PDT 2013 + * Updated for SDL 2.0 release +Sam Lantinga - Sat Mar 23 13:36:51 PDT 2013 + * Fixed bug setting colorkey for indexed PNG images +Torsten Stremlau - Sun Mar 10 10:19:25 PDT 2013 + * Added support for alpha and lossless WEBP images + +1.2.12: +mscott - 2012-02-06 19:40:23 PST + * Fixed image corruption when using ImageIO framework +Sylvain - Thu Nov 22 13:09:59 PST 2012 + * Added extended XPM color table (disabled by default in IMG_xpm.c) +Sam Lantinga - Thu Jan 19 23:18:09 EST 2012 + * Fixed regression in 1.2.11 loading 8-bit PNG images with libpng + +1.2.11: +Sam Lantinga - Sat Jan 14 17:54:38 EST 2012 + * Fixed loading 8-bit PNG images on Mac OS X +Sam Lantinga - Sat Dec 31 09:35:40 EST 2011 + * SDL_image is now under the zlib license +Michael Bonfils - Mon Nov 28 21:46:00 EST 2011 + * Added WEBP image support +Thomas Klausner - Wed Jan 19 19:31:25 PST 2011 + * Fixed compiling with libpng 1.4 +Sam Lantinga - Mon Jan 10 12:09:57 2011 -0800 + * Added Android.mk to build on the Android platform +Sam Lantinga - Mon May 10 22:42:53 PDT 2010 + * Fixed loading HAM6 images with stencil mask +Mark Tucker - Fri, 27 Nov 2009 12:38:21 -0500 + * Fixed bug loading 15 and 16 bit BMP images + +1.2.10: +Sam Lantinga - Sat Nov 14 11:22:14 PST 2009 + * Fixed bug loading multiple images + +1.2.9: +Sam Lantinga - Tue Nov 10 00:29:20 PST 2009 + * Fixed alpha premultiplication on Mac OS X and iPhone OS +Sam Lantinga - Sun Nov 8 07:52:11 PST 2009 + * Fixed checking for IMG_Init() return value in image loaders + +1.2.8: +Sam Lantinga - Sun Oct 4 13:12:54 PDT 2009 + * Added support for uncompressed PCX files +Mason Wheeler - 2009-06-10 06:29:45 PDT + * Added IMG_Init()/IMG_Quit() to prevent constantly loading and unloading DLLs +Couriersud - Mon, 12 Jan 2009 17:21:13 -0800 + * Added support for ICO and CUR image files +Eric Wing - Fri, 2 Jan 2009 02:01:16 -0800 + * Added ImageIO loading infrastructure for Mac OS X + * Added UIImage loading infrastructure for iPhone / iPod Touch + +1.2.7: +Sam Lantinga - Sun Nov 2 15:08:27 PST 2008 + * Fixed buffer overflow in BMP loading code, discovered by j00ru//vx +Sam Lantinga - Fri Dec 28 08:34:54 PST 2007 + * Fixed buffer overflow in GIF loading code, discovered by Michael Skladnikiewicz + +1.2.6: +Sam lantinga - Wed Jul 18 00:30:32 PDT 2007 + * Improved detection of libjpeg, libpng, and libtiff at configure time + * PNG and TIFF images are correctly identified even if dynamic libraries + to load them aren't available. + * Fixed loading of TIFF images using libtiff 3.6 +Sam Lantinga - Thu Jul 5 07:52:35 2007 + * Fixed static linking with libjpeg +Michael Koch - Tue Feb 13 10:09:17 2007 + * Fixed crash in IMG_ReadXPMFromArray() + +1.2.5: +Maurizio Monge - Sun May 14 13:57:32 PDT 2006 + * Fixed loading BMP palettes at unusual offsets +Sam Lantinga - Thu May 11 21:51:19 PDT 2006 + * Added support for dynamically loading libjpeg, libpng, and libtiff. +Sam Lantinga - Sun Apr 30 01:48:40 PDT 2006 + * Added gcc-fat.sh for generating Universal binaries on Mac OS X + * Updated libtool support to version 1.5.22 +Sam Lantinga - Sat Feb 4 15:17:44 PST 2006 + * Added support for XV thumbnail images +Gautier Portet - Fri, 19 Mar 2004 17:35:12 +0100 + * Added support for 32-bit BMP files with alpha + +1.2.4: +Pierre G. Richard - Fri, 30 Jul 2004 11:13:11 +0000 (UTC) + * Added support for RLE encoded BMP files +Marc Le Douarain - Fri, 26 Dec 2003 18:23:42 +0100 + * Added EHB and HAM mode support to the ILBM loader +Sam Lantinga - Wed Nov 19 00:23:44 PST 2003 + * Updated libtool support for new mingw32 DLL build process +Holger Schemel - Mon, 04 Aug 2003 21:50:52 +0200 + * Fixed crash loading certain PCX images +Kyle Davenport - Sat, 19 Apr 2003 17:13:31 -0500 + * Added .la files to the development RPM, fixing RPM build on RedHat 8 + +1.2.3: +Ryan C. Gordon - Sat, 8 Feb 2003 09:36:33 -0500 + * Fixed memory leak with non-seekable SDL_RWops +Marc Le Douarain - Sun, 22 Dec 2002 22:59:51 +0100 + * Added 24-bit support to the ILBM format loader +Sam Lantinga - Sun Oct 20 20:55:46 PDT 2002 + * Added shared library support for MacOS X +Pete Shinners - Thu Jun 20 10:05:54 PDT 2002 + * The JPEG loader can now load EXIF format JPEG images +Dag-Erling Smorgrav - Thu May 2 19:09:48 PDT 2002 + * The XCF loader now ignores invisible layers and channels + +1.2.2: +Sam Lantinga - Sat Apr 13 07:49:47 PDT 2002 + * Updated autogen.sh for new versions of automake + * Specify the SDL API calling convention (C by default) diff --git a/src/SDL2/COPYING.txt b/src/SDL2/COPYING.txt new file mode 100644 index 000000000..eed295df1 --- /dev/null +++ b/src/SDL2/COPYING.txt @@ -0,0 +1,20 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ diff --git a/src/SDL2/IMG.c b/src/SDL2/IMG.c new file mode 100644 index 000000000..e4aecf89b --- /dev/null +++ b/src/SDL2/IMG.c @@ -0,0 +1,239 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* A simple library to load images of various formats as SDL surfaces */ + +#include +#include +#include + +#include "SDL_image.h" + +#define ARRAYSIZE(a) (sizeof(a) / sizeof((a)[0])) + +/* Table of image detection and loading functions */ +static struct { + char *type; + int (SDLCALL *is)(SDL_RWops *src); + SDL_Surface *(SDLCALL *load)(SDL_RWops *src); +} supported[] = { + /* keep magicless formats first */ + { "TGA", NULL, IMG_LoadTGA_RW }, + { "CUR", IMG_isCUR, IMG_LoadCUR_RW }, + { "ICO", IMG_isICO, IMG_LoadICO_RW }, + { "BMP", IMG_isBMP, IMG_LoadBMP_RW }, + { "GIF", IMG_isGIF, IMG_LoadGIF_RW }, + { "JPG", IMG_isJPG, IMG_LoadJPG_RW }, + { "LBM", IMG_isLBM, IMG_LoadLBM_RW }, + { "PCX", IMG_isPCX, IMG_LoadPCX_RW }, + { "PNG", IMG_isPNG, IMG_LoadPNG_RW }, + { "PNM", IMG_isPNM, IMG_LoadPNM_RW }, /* P[BGP]M share code */ + { "TIF", IMG_isTIF, IMG_LoadTIF_RW }, + { "XCF", IMG_isXCF, IMG_LoadXCF_RW }, + { "XPM", IMG_isXPM, IMG_LoadXPM_RW }, + { "XV", IMG_isXV, IMG_LoadXV_RW }, + { "WEBP", IMG_isWEBP, IMG_LoadWEBP_RW }, +}; + +const SDL_version *IMG_Linked_Version(void) +{ + static SDL_version linked_version; + SDL_IMAGE_VERSION(&linked_version); + return(&linked_version); +} + +extern int IMG_InitJPG(); +extern void IMG_QuitJPG(); +extern int IMG_InitPNG(); +extern void IMG_QuitPNG(); +extern int IMG_InitTIF(); +extern void IMG_QuitTIF(); + +extern int IMG_InitWEBP(); +extern void IMG_QuitWEBP(); + +static int initialized = 0; + +int IMG_Init(int flags) +{ + int result = 0; + + if (flags & IMG_INIT_JPG) { + if ((initialized & IMG_INIT_JPG) || IMG_InitJPG() == 0) { + result |= IMG_INIT_JPG; + } + } + if (flags & IMG_INIT_PNG) { + if ((initialized & IMG_INIT_PNG) || IMG_InitPNG() == 0) { + result |= IMG_INIT_PNG; + } + } + if (flags & IMG_INIT_TIF) { + if ((initialized & IMG_INIT_TIF) || IMG_InitTIF() == 0) { + result |= IMG_INIT_TIF; + } + } + if (flags & IMG_INIT_WEBP) { + if ((initialized & IMG_INIT_WEBP) || IMG_InitWEBP() == 0) { + result |= IMG_INIT_WEBP; + } + } + initialized |= result; + + return (initialized); +} + +void IMG_Quit() +{ + if (initialized & IMG_INIT_JPG) { + IMG_QuitJPG(); + } + if (initialized & IMG_INIT_PNG) { + IMG_QuitPNG(); + } + if (initialized & IMG_INIT_TIF) { + IMG_QuitTIF(); + } + if (initialized & IMG_INIT_WEBP) { + IMG_QuitWEBP(); + } + initialized = 0; +} + +#if !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) +/* Load an image from a file */ +SDL_Surface *IMG_Load(const char *file) +{ + SDL_RWops *src = SDL_RWFromFile(file, "rb"); + const char *ext = strrchr(file, '.'); + if(ext) { + ext++; + } + if(!src) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + return IMG_LoadTyped_RW(src, 1, ext); +} +#endif + +/* Load an image from an SDL datasource (for compatibility) */ +SDL_Surface *IMG_Load_RW(SDL_RWops *src, int freesrc) +{ + return IMG_LoadTyped_RW(src, freesrc, NULL); +} + +/* Portable case-insensitive string compare function */ +static int IMG_string_equals(const char *str1, const char *str2) +{ + while ( *str1 && *str2 ) { + if ( toupper((unsigned char)*str1) != + toupper((unsigned char)*str2) ) + break; + ++str1; + ++str2; + } + return (!*str1 && !*str2); +} + +/* Load an image from an SDL datasource, optionally specifying the type */ +SDL_Surface *IMG_LoadTyped_RW(SDL_RWops *src, int freesrc, const char *type) +{ + int i; + SDL_Surface *image; + + /* Make sure there is something to do.. */ + if ( src == NULL ) { + IMG_SetError("Passed a NULL data source"); + return(NULL); + } + + /* See whether or not this data source can handle seeking */ + if ( SDL_RWseek(src, 0, RW_SEEK_CUR) < 0 ) { + IMG_SetError("Can't seek in this data source"); + if(freesrc) + SDL_RWclose(src); + return(NULL); + } + + /* Detect the type of image being loaded */ + image = NULL; + for ( i=0; i < ARRAYSIZE(supported); ++i ) { + if(supported[i].is) { + if(!supported[i].is(src)) + continue; + } else { + /* magicless format */ + if(!type + || !IMG_string_equals(type, supported[i].type)) + continue; + } +#ifdef DEBUG_IMGLIB + fprintf(stderr, "IMGLIB: Loading image as %s\n", + supported[i].type); +#endif + image = supported[i].load(src); + if(freesrc) + SDL_RWclose(src); + return image; + } + + if ( freesrc ) { + SDL_RWclose(src); + } + IMG_SetError("Unsupported image format"); + return NULL; +} + +#if SDL_VERSION_ATLEAST(2,0,0) +SDL_Texture *IMG_LoadTexture(SDL_Renderer *renderer, const char *file) +{ + SDL_Texture *texture = NULL; + SDL_Surface *surface = IMG_Load(file); + if (surface) { + texture = SDL_CreateTextureFromSurface(renderer, surface); + SDL_FreeSurface(surface); + } + return texture; +} + +SDL_Texture *IMG_LoadTexture_RW(SDL_Renderer *renderer, SDL_RWops *src, int freesrc) +{ + SDL_Texture *texture = NULL; + SDL_Surface *surface = IMG_Load_RW(src, freesrc); + if (surface) { + texture = SDL_CreateTextureFromSurface(renderer, surface); + SDL_FreeSurface(surface); + } + return texture; +} + +SDL_Texture *IMG_LoadTextureTyped_RW(SDL_Renderer *renderer, SDL_RWops *src, int freesrc, const char *type) +{ + SDL_Texture *texture = NULL; + SDL_Surface *surface = IMG_LoadTyped_RW(src, freesrc, type); + if (surface) { + texture = SDL_CreateTextureFromSurface(renderer, surface); + SDL_FreeSurface(surface); + } + return texture; +} +#endif /* SDL 2.0 */ diff --git a/src/SDL2/IMG_ImageIO.m b/src/SDL2/IMG_ImageIO.m new file mode 100644 index 000000000..9f82706a4 --- /dev/null +++ b/src/SDL2/IMG_ImageIO.m @@ -0,0 +1,803 @@ +/* + * IMG_ImageIO.c + * SDL_image + * + * Created by Eric Wing on 1/1/09. + * Copyright 2009 __MyCompanyName__. All rights reserved. + * + */ + +#if defined(__APPLE__) && !defined(SDL_IMAGE_USE_COMMON_BACKEND) + +#include "SDL_image.h" + +// Used because CGDataProviderCreate became deprecated in 10.5 +#include +#include +#include + +#if (TARGET_OS_IPHONE == 1) || (TARGET_IPHONE_SIMULATOR == 1) +#ifdef ALLOW_UIIMAGE_FALLBACK +#define USE_UIIMAGE_BACKEND() ([UIImage instancesRespondToSelector:@selector(initWithCGImage:scale:orientation:)] == NO) +#else +#define USE_UIIMAGE_BACKEND() (Internal_checkImageIOisAvailable()) +#endif +#import // for UTCoreTypes.h +#import +#import +#else +// For ImageIO framework and also LaunchServices framework (for UTIs) +#include +#endif + +/************************************************************** + ***** Begin Callback functions for block reading ************* + **************************************************************/ + +// This callback reads some bytes from an SDL_rwops and copies it +// to a Quartz buffer (supplied by Apple framework). +static size_t MyProviderGetBytesCallback(void* rwops_userdata, void* quartz_buffer, size_t the_count) +{ + return (size_t)SDL_RWread((struct SDL_RWops *)rwops_userdata, quartz_buffer, 1, the_count); +} + +// This callback is triggered when the data provider is released +// so you can clean up any resources. +static void MyProviderReleaseInfoCallback(void* rwops_userdata) +{ + // What should I put here? + // I think the user and SDL_RWops controls closing, so I don't do anything. +} + +static void MyProviderRewindCallback(void* rwops_userdata) +{ + SDL_RWseek((struct SDL_RWops *)rwops_userdata, 0, RW_SEEK_SET); +} + +#if MAC_OS_X_VERSION_MAX_ALLOWED >= 1050 // CGDataProviderCreateSequential was introduced in 10.5; CGDataProviderCreate is deprecated +off_t MyProviderSkipForwardBytesCallback(void* rwops_userdata, off_t the_count) +{ + off_t start_position = SDL_RWtell((struct SDL_RWops *)rwops_userdata); + SDL_RWseek((struct SDL_RWops *)rwops_userdata, the_count, RW_SEEK_CUR); + off_t end_position = SDL_RWtell((struct SDL_RWops *)rwops_userdata); + return (end_position - start_position); +} +#else // CGDataProviderCreate was deprecated in 10.5 +static void MyProviderSkipBytesCallback(void* rwops_userdata, size_t the_count) +{ + SDL_RWseek((struct SDL_RWops *)rwops_userdata, the_count, RW_SEEK_CUR); +} +#endif + +/************************************************************** + ***** End Callback functions for block reading *************** + **************************************************************/ + +// This creates a CGImageSourceRef which is a handle to an image that can be used to examine information +// about the image or load the actual image data. +static CGImageSourceRef CreateCGImageSourceFromRWops(SDL_RWops* rw_ops, CFDictionaryRef hints_and_options) +{ + CGImageSourceRef source_ref; + + // Similar to SDL_RWops, Apple has their own callbacks for dealing with data streams. + +#if MAC_OS_X_VERSION_MAX_ALLOWED >= 1050 // CGDataProviderCreateSequential was introduced in 10.5; CGDataProviderCreate is deprecated + CGDataProviderSequentialCallbacks provider_callbacks = + { + 0, + MyProviderGetBytesCallback, + MyProviderSkipForwardBytesCallback, + MyProviderRewindCallback, + MyProviderReleaseInfoCallback + }; + + CGDataProviderRef data_provider = CGDataProviderCreateSequential(rw_ops, &provider_callbacks); + + +#else // CGDataProviderCreate was deprecated in 10.5 + + CGDataProviderCallbacks provider_callbacks = + { + MyProviderGetBytesCallback, + MyProviderSkipBytesCallback, + MyProviderRewindCallback, + MyProviderReleaseInfoCallback + }; + + CGDataProviderRef data_provider = CGDataProviderCreate(rw_ops, &provider_callbacks); +#endif + // Get the CGImageSourceRef. + // The dictionary can be NULL or contain hints to help ImageIO figure out the image type. + source_ref = CGImageSourceCreateWithDataProvider(data_provider, hints_and_options); + CGDataProviderRelease(data_provider); + return source_ref; +} + +/* Create a CGImageSourceRef from a file. */ +/* Remember to CFRelease the created source when done. */ +static CGImageSourceRef CreateCGImageSourceFromFile(const char* the_path) +{ + CFURLRef the_url = NULL; + CGImageSourceRef source_ref = NULL; + CFStringRef cf_string = NULL; + + /* Create a CFString from a C string */ + cf_string = CFStringCreateWithCString(NULL, the_path, kCFStringEncodingUTF8); + if (!cf_string) { + return NULL; + } + + /* Create a CFURL from a CFString */ + the_url = CFURLCreateWithFileSystemPath(NULL, cf_string, kCFURLPOSIXPathStyle, false); + + /* Don't need the CFString any more (error or not) */ + CFRelease(cf_string); + + if(!the_url) + { + return NULL; + } + + + source_ref = CGImageSourceCreateWithURL(the_url, NULL); + /* Don't need the URL any more (error or not) */ + CFRelease(the_url); + + return source_ref; +} + +static CGImageRef CreateCGImageFromCGImageSource(CGImageSourceRef image_source) +{ + CGImageRef image_ref = NULL; + + if(NULL == image_source) + { + return NULL; + } + + // Get the first item in the image source (some image formats may + // contain multiple items). + image_ref = CGImageSourceCreateImageAtIndex(image_source, 0, NULL); + if(NULL == image_ref) + { + IMG_SetError("CGImageSourceCreateImageAtIndex() failed"); + } + return image_ref; +} + +static CFDictionaryRef CreateHintDictionary(CFStringRef uti_string_hint) +{ + CFDictionaryRef hint_dictionary = NULL; + + if(uti_string_hint != NULL) + { + // Do a bunch of work to setup a CFDictionary containing the jpeg compression properties. + CFStringRef the_keys[1]; + CFStringRef the_values[1]; + + the_keys[0] = kCGImageSourceTypeIdentifierHint; + the_values[0] = uti_string_hint; + + // kCFTypeDictionaryKeyCallBacks or kCFCopyStringDictionaryKeyCallBacks? + hint_dictionary = CFDictionaryCreate(NULL, (const void**)&the_keys, (const void**)&the_values, 1, &kCFTypeDictionaryKeyCallBacks, &kCFTypeDictionaryValueCallBacks); + } + return hint_dictionary; +} + +// Once we have our image, we need to get it into an SDL_Surface +static SDL_Surface* Create_SDL_Surface_From_CGImage_RGB(CGImageRef image_ref) +{ + /* This code is adapted from Apple's Documentation found here: + * http://developer.apple.com/documentation/GraphicsImaging/Conceptual/OpenGL-MacProgGuide/index.html + * Listing 9-4††Using a Quartz image as a texture source. + * Unfortunately, this guide doesn't show what to do about + * non-RGBA image formats so I'm making the rest up. + * All this code should be scrutinized. + */ + + size_t w = CGImageGetWidth(image_ref); + size_t h = CGImageGetHeight(image_ref); + CGRect rect = {{0, 0}, {w, h}}; + + CGImageAlphaInfo alpha = CGImageGetAlphaInfo(image_ref); + //size_t bits_per_pixel = CGImageGetBitsPerPixel(image_ref); + size_t bits_per_component = 8; + + SDL_Surface* surface; + Uint32 Amask; + Uint32 Rmask; + Uint32 Gmask; + Uint32 Bmask; + + CGContextRef bitmap_context; + CGBitmapInfo bitmap_info; + + /* This sets up a color space that results in identical values + * as the image data itself, which is the same as the standalone + * libpng loader. + * Thanks to Allegro. :) + */ + CGFloat whitePoint[3] = { 0.950, 1.000, 1.089 }; + CGFloat blackPoint[3] = { 0.000, 0.000, 0.000 }; + CGFloat gamma[3] = { 2.2, 2.2, 2.2 }; + CGFloat matrix[9] = { + 0.412, 0.213, 0.019, + 0.358, 0.715, 0.119, + 0.180, 0.072, 0.950 + }; + CGColorSpaceRef color_space = + CGColorSpaceCreateCalibratedRGB( + whitePoint, blackPoint, gamma, matrix + ); + + if (alpha == kCGImageAlphaNone || + alpha == kCGImageAlphaNoneSkipFirst || + alpha == kCGImageAlphaNoneSkipLast) { + bitmap_info = kCGImageAlphaNoneSkipFirst | kCGBitmapByteOrder32Host; /* XRGB */ + Amask = 0x00000000; + } else { + /* kCGImageAlphaFirst isn't supported */ + //bitmap_info = kCGImageAlphaFirst | kCGBitmapByteOrder32Host; /* ARGB */ + bitmap_info = kCGImageAlphaPremultipliedFirst | kCGBitmapByteOrder32Host; /* ARGB */ + Amask = 0xFF000000; + } + + Rmask = 0x00FF0000; + Gmask = 0x0000FF00; + Bmask = 0x000000FF; + + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, w, h, 32, Rmask, Gmask, Bmask, Amask); + if (surface) + { + // Sets up a context to be drawn to with surface->pixels as the area to be drawn to + bitmap_context = CGBitmapContextCreate( + surface->pixels, + surface->w, + surface->h, + bits_per_component, + surface->pitch, + color_space, + bitmap_info + ); + + // Draws the image into the context's image_data + CGContextDrawImage(bitmap_context, rect, image_ref); + + CGContextRelease(bitmap_context); + + // FIXME: Reverse the premultiplied alpha + if ((bitmap_info & kCGBitmapAlphaInfoMask) == kCGImageAlphaPremultipliedFirst) { + int i, j; + Uint8 *p = (Uint8 *)surface->pixels; + for (i = surface->h * surface->pitch/4; i--; ) { +#if __LITTLE_ENDIAN__ + Uint8 A = p[3]; + if (A) { + for (j = 0; j < 3; ++j) { + p[j] = (p[j] * 255) / A; + } + } +#else + Uint8 A = p[0]; + if (A) { + for (j = 1; j < 4; ++j) { + p[j] = (p[j] * 255) / A; + } + } +#endif /* ENDIAN */ + p += 4; + } + } + } + + if (color_space) + { + CGColorSpaceRelease(color_space); + } + + return surface; +} +static SDL_Surface* Create_SDL_Surface_From_CGImage_Index(CGImageRef image_ref) +{ + size_t w = CGImageGetWidth(image_ref); + size_t h = CGImageGetHeight(image_ref); + size_t bits_per_pixel = CGImageGetBitsPerPixel(image_ref); + size_t bytes_per_row = CGImageGetBytesPerRow(image_ref); + + SDL_Surface* surface; + SDL_Palette* palette; + CGColorSpaceRef color_space = CGImageGetColorSpace(image_ref); + CGColorSpaceRef base_color_space = CGColorSpaceGetBaseColorSpace(color_space); + size_t num_components = CGColorSpaceGetNumberOfComponents(base_color_space); + size_t num_entries = CGColorSpaceGetColorTableCount(color_space); + uint8_t *entry, entries[num_components * num_entries]; + + /* What do we do if it's not RGB? */ + if (num_components != 3) { + SDL_SetError("Unknown colorspace components %lu", num_components); + return NULL; + } + if (bits_per_pixel != 8) { + SDL_SetError("Unknown bits_per_pixel %lu", bits_per_pixel); + return NULL; + } + + CGColorSpaceGetColorTable(color_space, entries); + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, w, h, bits_per_pixel, 0, 0, 0, 0); + if (surface) { + uint8_t* pixels = (uint8_t*)surface->pixels; + CGDataProviderRef provider = CGImageGetDataProvider(image_ref); + NSData* data = (id)CGDataProviderCopyData(provider); + [data autorelease]; + const uint8_t* bytes = [data bytes]; + size_t i; + + palette = surface->format->palette; + for (i = 0, entry = entries; i < num_entries; ++i) { + palette->colors[i].r = entry[0]; + palette->colors[i].g = entry[1]; + palette->colors[i].b = entry[2]; + entry += num_components; + } + + for (i = 0; i < h; ++i) { + SDL_memcpy(pixels, bytes, w); + pixels += surface->pitch; + bytes += bytes_per_row; + } + } + return surface; +} +static SDL_Surface* Create_SDL_Surface_From_CGImage(CGImageRef image_ref) +{ + CGColorSpaceRef color_space = CGImageGetColorSpace(image_ref); + if (CGColorSpaceGetModel(color_space) == kCGColorSpaceModelIndexed) { + return Create_SDL_Surface_From_CGImage_Index(image_ref); + } else { + return Create_SDL_Surface_From_CGImage_RGB(image_ref); + } +} + + +#pragma mark - +#pragma mark IMG_Init stubs +#if !defined(ALLOW_UIIMAGE_FALLBACK) && ((TARGET_OS_IPHONE == 1) || (TARGET_IPHONE_SIMULATOR == 1)) +static int Internal_checkImageIOisAvailable() { + // just check if we are running on ios 4 or more, else throw exception + if ([UIImage instancesRespondToSelector:@selector(initWithCGImage:scale:orientation:)]) + return 0; + [NSException raise:@"UIImage fallback not enabled at compile time" + format:@"ImageIO is not available on your platform, please recompile SDL_Image with ALLOW_UIIMAGE_FALLBACK."]; + return -1; +} +#endif + +int IMG_InitJPG() +{ + return 0; +} + +void IMG_QuitJPG() +{ +} + +int IMG_InitPNG() +{ + return 0; +} + +void IMG_QuitPNG() +{ +} + +int IMG_InitTIF() +{ + return 0; +} + +void IMG_QuitTIF() +{ +} + +#pragma mark - +#pragma mark Get type of image +static int Internal_isType_UIImage (SDL_RWops *rw_ops, CFStringRef uti_string_to_test) +{ + int is_type = 0; + +#if defined(ALLOW_UIIMAGE_FALLBACK) && ((TARGET_OS_IPHONE == 1) || (TARGET_IPHONE_SIMULATOR == 1)) + int start = SDL_RWtell(rw_ops); + if ((0 == CFStringCompare(uti_string_to_test, kUTTypeICO, 0)) || + (0 == CFStringCompare(uti_string_to_test, CFSTR("com.microsoft.cur"), 0))) { + + // The Win32 ICO file header (14 bytes) + Uint16 bfReserved; + Uint16 bfType; + Uint16 bfCount; + int type = (0 == CFStringCompare(uti_string_to_test, kUTTypeICO, 0)) ? 1 : 2; + + bfReserved = SDL_ReadLE16(rw_ops); + bfType = SDL_ReadLE16(rw_ops); + bfCount = SDL_ReadLE16(rw_ops); + if ((bfReserved == 0) && (bfType == type) && (bfCount != 0)) + is_type = 1; + } else if (0 == CFStringCompare(uti_string_to_test, kUTTypeBMP, 0)) { + char magic[2]; + + if ( SDL_RWread(rw_ops, magic, sizeof(magic), 1) ) { + if ( strncmp(magic, "BM", 2) == 0 ) { + is_type = 1; + } + } + } else if (0 == CFStringCompare(uti_string_to_test, kUTTypeGIF, 0)) { + char magic[6]; + + if ( SDL_RWread(rw_ops, magic, sizeof(magic), 1) ) { + if ( (strncmp(magic, "GIF", 3) == 0) && + ((memcmp(magic + 3, "87a", 3) == 0) || + (memcmp(magic + 3, "89a", 3) == 0)) ) { + is_type = 1; + } + } + } else if (0 == CFStringCompare(uti_string_to_test, kUTTypeJPEG, 0)) { + int in_scan = 0; + Uint8 magic[4]; + + // This detection code is by Steaphan Greene + // Blame me, not Sam, if this doesn't work right. */ + // And don't forget to report the problem to the the sdl list too! */ + + if ( SDL_RWread(rw_ops, magic, 2, 1) ) { + if ( (magic[0] == 0xFF) && (magic[1] == 0xD8) ) { + is_type = 1; + while (is_type == 1) { + if(SDL_RWread(rw_ops, magic, 1, 2) != 2) { + is_type = 0; + } else if( (magic[0] != 0xFF) && (in_scan == 0) ) { + is_type = 0; + } else if( (magic[0] != 0xFF) || (magic[1] == 0xFF) ) { + /* Extra padding in JPEG (legal) */ + /* or this is data and we are scanning */ + SDL_RWseek(rw_ops, -1, SEEK_CUR); + } else if(magic[1] == 0xD9) { + /* Got to end of good JPEG */ + break; + } else if( (in_scan == 1) && (magic[1] == 0x00) ) { + /* This is an encoded 0xFF within the data */ + } else if( (magic[1] >= 0xD0) && (magic[1] < 0xD9) ) { + /* These have nothing else */ + } else if(SDL_RWread(rw_ops, magic+2, 1, 2) != 2) { + is_type = 0; + } else { + /* Yes, it's big-endian */ + Uint32 start; + Uint32 size; + Uint32 end; + start = SDL_RWtell(rw_ops); + size = (magic[2] << 8) + magic[3]; + end = SDL_RWseek(rw_ops, size-2, SEEK_CUR); + if ( end != start + size - 2 ) is_type = 0; + if ( magic[1] == 0xDA ) { + /* Now comes the actual JPEG meat */ +#ifdef FAST_IS_JPEG + /* Ok, I'm convinced. It is a JPEG. */ + break; +#else + /* I'm not convinced. Prove it! */ + in_scan = 1; +#endif + } + } + } + } + } + } else if (0 == CFStringCompare(uti_string_to_test, kUTTypePNG, 0)) { + Uint8 magic[4]; + + if ( SDL_RWread(rw_ops, magic, 1, sizeof(magic)) == sizeof(magic) ) { + if ( magic[0] == 0x89 && + magic[1] == 'P' && + magic[2] == 'N' && + magic[3] == 'G' ) { + is_type = 1; + } + } + } else if (0 == CFStringCompare(uti_string_to_test, CFSTR("com.truevision.tga-image"), 0)) { + //TODO: fill me! + } else if (0 == CFStringCompare(uti_string_to_test, kUTTypeTIFF, 0)) { + Uint8 magic[4]; + + if ( SDL_RWread(rw_ops, magic, 1, sizeof(magic)) == sizeof(magic) ) { + if ( (magic[0] == 'I' && + magic[1] == 'I' && + magic[2] == 0x2a && + magic[3] == 0x00) || + (magic[0] == 'M' && + magic[1] == 'M' && + magic[2] == 0x00 && + magic[3] == 0x2a) ) { + is_type = 1; + } + } + } + + // reset the file descption pointer + SDL_RWseek(rw_ops, start, SEEK_SET); + +#endif /* #if defined(ALLOW_UIIMAGE_FALLBACK) && ((TARGET_OS_IPHONE == 1) || (TARGET_IPHONE_SIMULATOR == 1)) */ + return is_type; +} + +static int Internal_isType_ImageIO (SDL_RWops *rw_ops, CFStringRef uti_string_to_test) +{ + int is_type = 0; + + CFDictionaryRef hint_dictionary = CreateHintDictionary(uti_string_to_test); + CGImageSourceRef image_source = CreateCGImageSourceFromRWops(rw_ops, hint_dictionary); + + if (hint_dictionary != NULL) { + CFRelease(hint_dictionary); + } + + if (NULL == image_source) { + return 0; + } + + // This will get the UTI of the container, not the image itself. + // Under most cases, this won't be a problem. + // But if a person passes an icon file which contains a bmp, + // the format will be of the icon file. + // But I think the main SDL_image codebase has this same problem so I'm not going to worry about it. + CFStringRef uti_type = CGImageSourceGetType(image_source); + // CFShow(uti_type); + + // Unsure if we really want conformance or equality + is_type = (int)UTTypeConformsTo(uti_string_to_test, uti_type); + + CFRelease(image_source); + return is_type; +} + +static int Internal_isType (SDL_RWops *rw_ops, CFStringRef uti_string_to_test) +{ + if (rw_ops == NULL) + return 0; + +#if (TARGET_OS_IPHONE == 1) || (TARGET_IPHONE_SIMULATOR == 1) + if (USE_UIIMAGE_BACKEND()) + return Internal_isType_UIImage(rw_ops, uti_string_to_test); + else +#endif + return Internal_isType_ImageIO(rw_ops, uti_string_to_test); +} + +#ifdef BMP_USES_IMAGEIO + +int IMG_isCUR(SDL_RWops *src) +{ + /* FIXME: Is this a supported type? */ + return Internal_isType(src, CFSTR("com.microsoft.cur")); +} + +int IMG_isICO(SDL_RWops *src) +{ + return Internal_isType(src, kUTTypeICO); +} + +int IMG_isBMP(SDL_RWops *src) +{ + return Internal_isType(src, kUTTypeBMP); +} + +#endif /* BMP_USES_IMAGEIO */ + +int IMG_isGIF(SDL_RWops *src) +{ + return Internal_isType(src, kUTTypeGIF); +} + +// Note: JPEG 2000 is kUTTypeJPEG2000 +int IMG_isJPG(SDL_RWops *src) +{ + return Internal_isType(src, kUTTypeJPEG); +} + +int IMG_isPNG(SDL_RWops *src) +{ + return Internal_isType(src, kUTTypePNG); +} + +// This isn't a public API function. Apple seems to be able to identify tga's. +int IMG_isTGA(SDL_RWops *src) +{ + return Internal_isType(src, CFSTR("com.truevision.tga-image")); +} + +int IMG_isTIF(SDL_RWops *src) +{ + return Internal_isType(src, kUTTypeTIFF); +} + +#pragma mark - +#pragma mark Load image engine +static SDL_Surface *LoadImageFromRWops_UIImage (SDL_RWops* rw_ops, CFStringRef uti_string_hint) +{ + SDL_Surface *sdl_surface = NULL; + +#if defined(ALLOW_UIIMAGE_FALLBACK) && ((TARGET_OS_IPHONE == 1) || (TARGET_IPHONE_SIMULATOR == 1)) + NSAutoreleasePool* autorelease_pool = [[NSAutoreleasePool alloc] init]; + UIImage *ui_image; + int bytes_read = 0; + // I don't know what a good size is. + // Max recommended texture size is 1024x1024 on iPhone so maybe base it on that? + const int block_size = 1024*4; + char temp_buffer[block_size]; + + NSMutableData* ns_data = [[NSMutableData alloc] initWithCapacity:1024*1024*4]; + do { + bytes_read = SDL_RWread(rw_ops, temp_buffer, 1, block_size); + [ns_data appendBytes:temp_buffer length:bytes_read]; + } while (bytes_read > 0); + + ui_image = [[UIImage alloc] initWithData:ns_data]; + if (ui_image != nil) + sdl_surface = Create_SDL_Surface_From_CGImage([ui_image CGImage]); + [ui_image release]; + [ns_data release]; + [autorelease_pool drain]; + +#endif /* #if defined(ALLOW_UIIMAGE_FALLBACK) && ((TARGET_OS_IPHONE == 1) || (TARGET_IPHONE_SIMULATOR == 1)) */ + return sdl_surface; +} + +static SDL_Surface *LoadImageFromRWops_ImageIO (SDL_RWops *rw_ops, CFStringRef uti_string_hint) +{ + CFDictionaryRef hint_dictionary = CreateHintDictionary(uti_string_hint); + CGImageSourceRef image_source = CreateCGImageSourceFromRWops(rw_ops, hint_dictionary); + + if (hint_dictionary != NULL) + CFRelease(hint_dictionary); + + if (NULL == image_source) + return NULL; + + CGImageRef image_ref = CreateCGImageFromCGImageSource(image_source); + CFRelease(image_source); + + if (NULL == image_ref) + return NULL; + SDL_Surface *sdl_surface = Create_SDL_Surface_From_CGImage(image_ref); + CFRelease(image_ref); + + return sdl_surface; +} + +static SDL_Surface *LoadImageFromRWops (SDL_RWops *rw_ops, CFStringRef uti_string_hint) +{ +#if (TARGET_OS_IPHONE == 1) || (TARGET_IPHONE_SIMULATOR == 1) + if (USE_UIIMAGE_BACKEND()) + return LoadImageFromRWops_UIImage(rw_ops, uti_string_hint); + else +#endif + return LoadImageFromRWops_ImageIO(rw_ops, uti_string_hint); +} + +static SDL_Surface* LoadImageFromFile_UIImage (const char *file) +{ + SDL_Surface *sdl_surface = NULL; + +#if defined(ALLOW_UIIMAGE_FALLBACK) && ((TARGET_OS_IPHONE == 1) || (TARGET_IPHONE_SIMULATOR == 1)) + NSAutoreleasePool* autorelease_pool = [[NSAutoreleasePool alloc] init]; + NSString *ns_string = [[NSString alloc] initWithUTF8String:file]; + UIImage *ui_image = [[UIImage alloc] initWithContentsOfFile:ns_string]; + if (ui_image != nil) + sdl_surface = Create_SDL_Surface_From_CGImage([ui_image CGImage]); + [ui_image release]; + [ns_string release]; + [autorelease_pool drain]; + +#endif /* #if defined(ALLOW_UIIMAGE_FALLBACK) && ((TARGET_OS_IPHONE == 1) || (TARGET_IPHONE_SIMULATOR == 1)) */ + return sdl_surface; +} + +static SDL_Surface* LoadImageFromFile_ImageIO (const char *file) +{ + CGImageSourceRef image_source = NULL; + + image_source = CreateCGImageSourceFromFile(file); + + if(NULL == image_source) + return NULL; + + CGImageRef image_ref = CreateCGImageFromCGImageSource(image_source); + CFRelease(image_source); + + if (NULL == image_ref) + return NULL; + SDL_Surface *sdl_surface = Create_SDL_Surface_From_CGImage(image_ref); + CFRelease(image_ref); + return sdl_surface; +} + +static SDL_Surface* LoadImageFromFile (const char *file) +{ +#if (TARGET_OS_IPHONE == 1) || (TARGET_IPHONE_SIMULATOR == 1) + if (USE_UIIMAGE_BACKEND()) + return LoadImageFromFile_UIImage(file); + else +#endif + return LoadImageFromFile_ImageIO(file); +} + +#ifdef BMP_USES_IMAGEIO + +SDL_Surface* IMG_LoadCUR_RW (SDL_RWops *src) +{ + /* FIXME: Is this a supported type? */ + return LoadImageFromRWops(src, CFSTR("com.microsoft.cur")); +} + +SDL_Surface* IMG_LoadICO_RW (SDL_RWops *src) +{ + return LoadImageFromRWops(src, kUTTypeICO); +} + +SDL_Surface* IMG_LoadBMP_RW (SDL_RWops *src) +{ + return LoadImageFromRWops(src, kUTTypeBMP); +} + +#endif /* BMP_USES_IMAGEIO */ + +SDL_Surface* IMG_LoadGIF_RW (SDL_RWops *src) +{ + return LoadImageFromRWops (src, kUTTypeGIF); +} + +SDL_Surface* IMG_LoadJPG_RW (SDL_RWops *src) +{ + return LoadImageFromRWops (src, kUTTypeJPEG); +} + +SDL_Surface* IMG_LoadPNG_RW (SDL_RWops *src) +{ + return LoadImageFromRWops (src, kUTTypePNG); +} + +SDL_Surface* IMG_LoadTGA_RW (SDL_RWops *src) +{ + return LoadImageFromRWops(src, CFSTR("com.truevision.tga-image")); +} + +SDL_Surface* IMG_LoadTIF_RW (SDL_RWops *src) +{ + return LoadImageFromRWops(src, kUTTypeTIFF); +} + +// Since UIImage doesn't really support streams well, we should optimize for the file case. +// Apple provides both stream and file loading functions in ImageIO. +// Potentially, Apple can optimize for either case. +SDL_Surface* IMG_Load (const char *file) +{ + SDL_Surface* sdl_surface = NULL; + + sdl_surface = LoadImageFromFile(file); + if(NULL == sdl_surface) + { + // Either the file doesn't exist or ImageIO doesn't understand the format. + // For the latter case, fallback to the native SDL_image handlers. + SDL_RWops *src = SDL_RWFromFile(file, "rb"); + char *ext = strrchr(file, '.'); + if (ext) { + ext++; + } + if (!src) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + sdl_surface = IMG_LoadTyped_RW(src, 1, ext); + } + return sdl_surface; +} + +#endif /* defined(__APPLE__) && !defined(SDL_IMAGE_USE_COMMON_BACKEND) */ diff --git a/src/SDL2/IMG_UIImage.m b/src/SDL2/IMG_UIImage.m new file mode 100644 index 000000000..b3028e92e --- /dev/null +++ b/src/SDL2/IMG_UIImage.m @@ -0,0 +1,440 @@ +/* + * IMG_ImageIO.c + * SDL_image + * + * Created by Eric Wing on 1/2/09. + * Copyright 2009 __MyCompanyName__. All rights reserved. + * + */ +#include "SDL_image.h" +#import +#import // for UTCoreTypes.h + +// Once we have our image, we need to get it into an SDL_Surface +// (Copied straight from the ImageIO backend.) +static SDL_Surface* Create_SDL_Surface_From_CGImage(CGImageRef image_ref) +{ + /* This code is adapted from Apple's Documentation found here: + * http://developer.apple.com/documentation/GraphicsImaging/Conceptual/OpenGL-MacProgGuide/index.html + * Listing 9-4††Using a Quartz image as a texture source. + * Unfortunately, this guide doesn't show what to do about + * non-RGBA image formats so I'm making the rest up. + * All this code should be scrutinized. + */ + + size_t w = CGImageGetWidth(image_ref); + size_t h = CGImageGetHeight(image_ref); + CGRect rect = {{0, 0}, {w, h}}; + + CGImageAlphaInfo alpha = CGImageGetAlphaInfo(image_ref); + //size_t bits_per_pixel = CGImageGetBitsPerPixel(image_ref); + size_t bits_per_component = 8; + + SDL_Surface* surface; + Uint32 Amask; + Uint32 Rmask; + Uint32 Gmask; + Uint32 Bmask; + + CGContextRef bitmap_context; + CGBitmapInfo bitmap_info; + CGColorSpaceRef color_space = CGColorSpaceCreateDeviceRGB(); + + if (alpha == kCGImageAlphaNone || + alpha == kCGImageAlphaNoneSkipFirst || + alpha == kCGImageAlphaNoneSkipLast) { + bitmap_info = kCGImageAlphaNoneSkipFirst | kCGBitmapByteOrder32Host; /* XRGB */ + Amask = 0x00000000; + } else { + /* kCGImageAlphaFirst isn't supported */ + //bitmap_info = kCGImageAlphaFirst | kCGBitmapByteOrder32Host; /* ARGB */ + bitmap_info = kCGImageAlphaPremultipliedFirst | kCGBitmapByteOrder32Host; /* ARGB */ + Amask = 0xFF000000; + } + + Rmask = 0x00FF0000; + Gmask = 0x0000FF00; + Bmask = 0x000000FF; + + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, w, h, 32, Rmask, Gmask, Bmask, Amask); + if (surface) + { + // Sets up a context to be drawn to with surface->pixels as the area to be drawn to + bitmap_context = CGBitmapContextCreate( + surface->pixels, + surface->w, + surface->h, + bits_per_component, + surface->pitch, + color_space, + bitmap_info + ); + + // Draws the image into the context's image_data + CGContextDrawImage(bitmap_context, rect, image_ref); + + CGContextRelease(bitmap_context); + + // FIXME: Reverse the premultiplied alpha + if ((bitmap_info & kCGBitmapAlphaInfoMask) == kCGImageAlphaPremultipliedFirst) { + int i, j; + Uint8 *p = (Uint8 *)surface->pixels; + for (i = surface->h * surface->pitch/4; i--; ) { +#if __LITTLE_ENDIAN__ + Uint8 A = p[3]; + if (A) { + for (j = 0; j < 3; ++j) { + p[j] = (p[j] * 255) / A; + } + } +#else + Uint8 A = p[0]; + if (A) { + for (j = 1; j < 4; ++j) { + p[j] = (p[j] * 255) / A; + } + } +#endif /* ENDIAN */ + p += 4; + } + } + } + + if (color_space) + { + CGColorSpaceRelease(color_space); + } + + return surface; +} + +static SDL_Surface* LoadImageFromRWops(SDL_RWops* rw_ops, CFStringRef uti_string_hint) +{ + NSAutoreleasePool* autorelease_pool = [[NSAutoreleasePool alloc] init]; + SDL_Surface* sdl_surface; + UIImage* ui_image; + + int bytes_read = 0; + // I don't know what a good size is. + // Max recommended texture size is 1024x1024 on iPhone so maybe base it on that? + const int block_size = 1024*4; + char temp_buffer[block_size]; + + NSMutableData* ns_data = [[NSMutableData alloc] initWithCapacity:1024*1024*4]; + + + do + { + bytes_read = SDL_RWread(rw_ops, temp_buffer, 1, block_size); + [ns_data appendBytes:temp_buffer length:bytes_read]; + } while(bytes_read > 0); + + ui_image = [[UIImage alloc] initWithData:ns_data]; + + sdl_surface = Create_SDL_Surface_From_CGImage([ui_image CGImage]); + + [ui_image release]; + [ns_data release]; + + [autorelease_pool drain]; + + return sdl_surface; +} + +static SDL_Surface* LoadImageFromFile(const char *file) +{ + NSAutoreleasePool* autorelease_pool = [[NSAutoreleasePool alloc] init]; + SDL_Surface* sdl_surface = NULL; + UIImage* ui_image; + NSString* ns_string; + + ns_string = [[NSString alloc] initWithUTF8String:file]; + ui_image = [[UIImage alloc] initWithContentsOfFile:ns_string]; + if(ui_image != NULL) + { + sdl_surface = Create_SDL_Surface_From_CGImage([ui_image CGImage]); + } + + [ui_image release]; + [ns_string release]; + + [autorelease_pool drain]; + + return sdl_surface; +} + + +/* Since UIImage doesn't really support streams well, we should optimize for the file case. */ +SDL_Surface *IMG_Load(const char *file) +{ + SDL_Surface* sdl_surface = NULL; + + sdl_surface = LoadImageFromFile(file); + if(NULL == sdl_surface) + { + // Either the file doesn't exist or ImageIO doesn't understand the format. + // For the latter case, fallback to the native SDL_image handlers. + + SDL_RWops *src = SDL_RWFromFile(file, "rb"); + char *ext = strrchr(file, '.'); + if(ext) { + ext++; + } + if(!src) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + sdl_surface = IMG_LoadTyped_RW(src, 1, ext); + } + return sdl_surface; +} + + +int IMG_InitJPG() +{ + return 0; +} + +void IMG_QuitJPG() +{ +} + +int IMG_InitPNG() +{ + return 0; +} + +void IMG_QuitPNG() +{ +} + +int IMG_InitTIF() +{ + return 0; +} + +void IMG_QuitTIF() +{ +} + +/* Copied straight from other files so I don't have to alter them. */ +static int IMG_isICOCUR(SDL_RWops *src, int type) +{ + int start; + int is_ICOCUR; + + /* The Win32 ICO file header (14 bytes) */ + Uint16 bfReserved; + Uint16 bfType; + Uint16 bfCount; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_ICOCUR = 0; + bfReserved = SDL_ReadLE16(src); + bfType = SDL_ReadLE16(src); + bfCount = SDL_ReadLE16(src); + if ((bfReserved == 0) && (bfType == type) && (bfCount != 0)) + is_ICOCUR = 1; + SDL_RWseek(src, start, SEEK_SET); + + return (is_ICOCUR); +} + +int IMG_isICO(SDL_RWops *src) +{ + return IMG_isICOCUR(src, 1); +} + +int IMG_isCUR(SDL_RWops *src) +{ + return IMG_isICOCUR(src, 2); +} + +int IMG_isBMP(SDL_RWops *src) +{ + int start; + int is_BMP; + char magic[2]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_BMP = 0; + if ( SDL_RWread(src, magic, sizeof(magic), 1) ) { + if ( strncmp(magic, "BM", 2) == 0 ) { + is_BMP = 1; + } + } + SDL_RWseek(src, start, SEEK_SET); + return(is_BMP); +} + +int IMG_isGIF(SDL_RWops *src) +{ + int start; + int is_GIF; + char magic[6]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_GIF = 0; + if ( SDL_RWread(src, magic, sizeof(magic), 1) ) { + if ( (strncmp(magic, "GIF", 3) == 0) && + ((memcmp(magic + 3, "87a", 3) == 0) || + (memcmp(magic + 3, "89a", 3) == 0)) ) { + is_GIF = 1; + } + } + SDL_RWseek(src, start, SEEK_SET); + return(is_GIF); +} + +int IMG_isJPG(SDL_RWops *src) +{ + int start; + int is_JPG; + int in_scan; + Uint8 magic[4]; + + /* This detection code is by Steaphan Greene */ + /* Blame me, not Sam, if this doesn't work right. */ + /* And don't forget to report the problem to the the sdl list too! */ + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_JPG = 0; + in_scan = 0; + if ( SDL_RWread(src, magic, 2, 1) ) { + if ( (magic[0] == 0xFF) && (magic[1] == 0xD8) ) { + is_JPG = 1; + while (is_JPG == 1) { + if(SDL_RWread(src, magic, 1, 2) != 2) { + is_JPG = 0; + } else if( (magic[0] != 0xFF) && (in_scan == 0) ) { + is_JPG = 0; + } else if( (magic[0] != 0xFF) || (magic[1] == 0xFF) ) { + /* Extra padding in JPEG (legal) */ + /* or this is data and we are scanning */ + SDL_RWseek(src, -1, SEEK_CUR); + } else if(magic[1] == 0xD9) { + /* Got to end of good JPEG */ + break; + } else if( (in_scan == 1) && (magic[1] == 0x00) ) { + /* This is an encoded 0xFF within the data */ + } else if( (magic[1] >= 0xD0) && (magic[1] < 0xD9) ) { + /* These have nothing else */ + } else if(SDL_RWread(src, magic+2, 1, 2) != 2) { + is_JPG = 0; + } else { + /* Yes, it's big-endian */ + Uint32 start; + Uint32 size; + Uint32 end; + start = SDL_RWtell(src); + size = (magic[2] << 8) + magic[3]; + end = SDL_RWseek(src, size-2, SEEK_CUR); + if ( end != start + size - 2 ) is_JPG = 0; + if ( magic[1] == 0xDA ) { + /* Now comes the actual JPEG meat */ +#ifdef FAST_IS_JPEG + /* Ok, I'm convinced. It is a JPEG. */ + break; +#else + /* I'm not convinced. Prove it! */ + in_scan = 1; +#endif + } + } + } + } + } + SDL_RWseek(src, start, SEEK_SET); + return(is_JPG); +} + +int IMG_isPNG(SDL_RWops *src) +{ + int start; + int is_PNG; + Uint8 magic[4]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_PNG = 0; + if ( SDL_RWread(src, magic, 1, sizeof(magic)) == sizeof(magic) ) { + if ( magic[0] == 0x89 && + magic[1] == 'P' && + magic[2] == 'N' && + magic[3] == 'G' ) { + is_PNG = 1; + } + } + SDL_RWseek(src, start, SEEK_SET); + return(is_PNG); +} + +int IMG_isTIF(SDL_RWops* src) +{ + int start; + int is_TIF; + Uint8 magic[4]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_TIF = 0; + if ( SDL_RWread(src, magic, 1, sizeof(magic)) == sizeof(magic) ) { + if ( (magic[0] == 'I' && + magic[1] == 'I' && + magic[2] == 0x2a && + magic[3] == 0x00) || + (magic[0] == 'M' && + magic[1] == 'M' && + magic[2] == 0x00 && + magic[3] == 0x2a) ) { + is_TIF = 1; + } + } + SDL_RWseek(src, start, SEEK_SET); + return(is_TIF); +} + +SDL_Surface* IMG_LoadCUR_RW(SDL_RWops *src) +{ + /* FIXME: Is this a supported type? */ + return LoadImageFromRWops(src, CFSTR("com.microsoft.cur")); +} +SDL_Surface* IMG_LoadICO_RW(SDL_RWops *src) +{ + return LoadImageFromRWops(src, kUTTypeICO); +} +SDL_Surface* IMG_LoadBMP_RW(SDL_RWops *src) +{ + return LoadImageFromRWops(src, kUTTypeBMP); +} +SDL_Surface* IMG_LoadGIF_RW(SDL_RWops *src) +{ + return LoadImageFromRWops(src, kUTTypeGIF); +} +SDL_Surface* IMG_LoadJPG_RW(SDL_RWops *src) +{ + return LoadImageFromRWops(src, kUTTypeJPEG); +} +SDL_Surface* IMG_LoadPNG_RW(SDL_RWops *src) +{ + return LoadImageFromRWops(src, kUTTypePNG); +} +SDL_Surface* IMG_LoadTGA_RW(SDL_RWops *src) +{ + return LoadImageFromRWops(src, CFSTR("com.truevision.tga-image")); +} +SDL_Surface* IMG_LoadTIF_RW(SDL_RWops *src) +{ + return LoadImageFromRWops(src, kUTTypeTIFF); +} + diff --git a/src/SDL2/IMG_bmp.c b/src/SDL2/IMG_bmp.c new file mode 100644 index 000000000..59903029e --- /dev/null +++ b/src/SDL2/IMG_bmp.c @@ -0,0 +1,892 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#if (!defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND)) || !defined(BMP_USES_IMAGEIO) + +/* This is a BMP image file loading framework + * + * ICO/CUR file support is here as well since it uses similar internal + * representation + * + * A good test suite of BMP images is available at: + * http://entropymine.com/jason/bmpsuite/bmpsuite/html/bmpsuite.html + */ + +#include +#include + +#include "SDL_image.h" + +#ifdef LOAD_BMP + +/* See if an image is contained in a data source */ +int IMG_isBMP(SDL_RWops *src) +{ + Sint64 start; + int is_BMP; + char magic[2]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_BMP = 0; + if ( SDL_RWread(src, magic, sizeof(magic), 1) ) { + if ( SDL_strncmp(magic, "BM", 2) == 0 ) { + is_BMP = 1; + } + } + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_BMP); +} + +static int IMG_isICOCUR(SDL_RWops *src, int type) +{ + Sint64 start; + int is_ICOCUR; + + /* The Win32 ICO file header (14 bytes) */ + Uint16 bfReserved; + Uint16 bfType; + Uint16 bfCount; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_ICOCUR = 0; + bfReserved = SDL_ReadLE16(src); + bfType = SDL_ReadLE16(src); + bfCount = SDL_ReadLE16(src); + if ((bfReserved == 0) && (bfType == type) && (bfCount != 0)) + is_ICOCUR = 1; + SDL_RWseek(src, start, RW_SEEK_SET); + + return (is_ICOCUR); +} + +int IMG_isICO(SDL_RWops *src) +{ + return IMG_isICOCUR(src, 1); +} + +int IMG_isCUR(SDL_RWops *src) +{ + return IMG_isICOCUR(src, 2); +} + +#include "SDL_error.h" +#include "SDL_video.h" +#include "SDL_endian.h" + +/* Compression encodings for BMP files */ +#ifndef BI_RGB +#define BI_RGB 0 +#define BI_RLE8 1 +#define BI_RLE4 2 +#define BI_BITFIELDS 3 +#endif + +static int readRlePixels(SDL_Surface * surface, SDL_RWops * src, int isRle8) +{ + /* + | Sets the surface pixels from src. A bmp image is upside down. + */ + int pitch = surface->pitch; + int height = surface->h; + Uint8 *start = (Uint8 *)surface->pixels; + Uint8 *end = start + (height*pitch); + Uint8 *bits = end-pitch, *spot; + int ofs = 0; + Uint8 ch; + Uint8 needsPad; + +#define COPY_PIXEL(x) spot = &bits[ofs++]; if(spot >= start && spot < end) *spot = (x) + + for (;;) { + if ( !SDL_RWread(src, &ch, 1, 1) ) return 1; + /* + | encoded mode starts with a run length, and then a byte + | with two colour indexes to alternate between for the run + */ + if ( ch ) { + Uint8 pixel; + if ( !SDL_RWread(src, &pixel, 1, 1) ) return 1; + if ( isRle8 ) { /* 256-color bitmap, compressed */ + do { + COPY_PIXEL(pixel); + } while (--ch); + } else { /* 16-color bitmap, compressed */ + Uint8 pixel0 = pixel >> 4; + Uint8 pixel1 = pixel & 0x0F; + for (;;) { + COPY_PIXEL(pixel0); /* even count, high nibble */ + if (!--ch) break; + COPY_PIXEL(pixel1); /* odd count, low nibble */ + if (!--ch) break; + } + } + } else { + /* + | A leading zero is an escape; it may signal the end of the bitmap, + | a cursor move, or some absolute data. + | zero tag may be absolute mode or an escape + */ + if ( !SDL_RWread(src, &ch, 1, 1) ) return 1; + switch (ch) { + case 0: /* end of line */ + ofs = 0; + bits -= pitch; /* go to previous */ + break; + case 1: /* end of bitmap */ + return 0; /* success! */ + case 2: /* delta */ + if ( !SDL_RWread(src, &ch, 1, 1) ) return 1; + ofs += ch; + if ( !SDL_RWread(src, &ch, 1, 1) ) return 1; + bits -= (ch * pitch); + break; + default: /* no compression */ + if (isRle8) { + needsPad = ( ch & 1 ); + do { + Uint8 pixel; + if ( !SDL_RWread(src, &pixel, 1, 1) ) return 1; + COPY_PIXEL(pixel); + } while (--ch); + } else { + needsPad = ( ((ch+1)>>1) & 1 ); /* (ch+1)>>1: bytes size */ + for (;;) { + Uint8 pixel; + if ( !SDL_RWread(src, &pixel, 1, 1) ) return 1; + COPY_PIXEL(pixel >> 4); + if (!--ch) break; + COPY_PIXEL(pixel & 0x0F); + if (!--ch) break; + } + } + /* pad at even boundary */ + if ( needsPad && !SDL_RWread(src, &ch, 1, 1) ) return 1; + break; + } + } + } +} + +static void CorrectAlphaChannel(SDL_Surface *surface) +{ + /* Check to see if there is any alpha channel data */ + SDL_bool hasAlpha = SDL_FALSE; +#if SDL_BYTEORDER == SDL_BIG_ENDIAN + int alphaChannelOffset = 0; +#else + int alphaChannelOffset = 3; +#endif + Uint8 *alpha = ((Uint8*)surface->pixels) + alphaChannelOffset; + Uint8 *end = alpha + surface->h * surface->pitch; + + while (alpha < end) { + if (*alpha != 0) { + hasAlpha = SDL_TRUE; + break; + } + alpha += 4; + } + + if (!hasAlpha) { + alpha = ((Uint8*)surface->pixels) + alphaChannelOffset; + while (alpha < end) { + *alpha = SDL_ALPHA_OPAQUE; + alpha += 4; + } + } +} + +static SDL_Surface *LoadBMP_RW (SDL_RWops *src, int freesrc) +{ + SDL_bool was_error; + Sint64 fp_offset; + int bmpPitch; + int i, pad; + SDL_Surface *surface; + Uint32 Rmask; + Uint32 Gmask; + Uint32 Bmask; + Uint32 Amask; + SDL_Palette *palette; + Uint8 *bits; + Uint8 *top, *end; + SDL_bool topDown; + int ExpandBMP; + SDL_bool correctAlpha = SDL_FALSE; + + /* The Win32 BMP file header (14 bytes) */ + char magic[2]; + Uint32 bfSize; + Uint16 bfReserved1; + Uint16 bfReserved2; + Uint32 bfOffBits; + + /* The Win32 BITMAPINFOHEADER struct (40 bytes) */ + Uint32 biSize; + Sint32 biWidth; + Sint32 biHeight; + Uint16 biPlanes; + Uint16 biBitCount; + Uint32 biCompression; + Uint32 biSizeImage; + Sint32 biXPelsPerMeter; + Sint32 biYPelsPerMeter; + Uint32 biClrUsed; + Uint32 biClrImportant; + + /* Make sure we are passed a valid data source */ + surface = NULL; + was_error = SDL_FALSE; + if ( src == NULL ) { + was_error = SDL_TRUE; + goto done; + } + + /* Read in the BMP file header */ + fp_offset = SDL_RWtell(src); + SDL_ClearError(); + if ( SDL_RWread(src, magic, 1, 2) != 2 ) { + SDL_Error(SDL_EFREAD); + was_error = SDL_TRUE; + goto done; + } + if ( SDL_strncmp(magic, "BM", 2) != 0 ) { + IMG_SetError("File is not a Windows BMP file"); + was_error = SDL_TRUE; + goto done; + } + bfSize = SDL_ReadLE32(src); + bfReserved1 = SDL_ReadLE16(src); + bfReserved2 = SDL_ReadLE16(src); + bfOffBits = SDL_ReadLE32(src); + + /* Read the Win32 BITMAPINFOHEADER */ + biSize = SDL_ReadLE32(src); + if ( biSize == 12 ) { + biWidth = (Uint32)SDL_ReadLE16(src); + biHeight = (Uint32)SDL_ReadLE16(src); + biPlanes = SDL_ReadLE16(src); + biBitCount = SDL_ReadLE16(src); + biCompression = BI_RGB; + biSizeImage = 0; + biXPelsPerMeter = 0; + biYPelsPerMeter = 0; + biClrUsed = 0; + biClrImportant = 0; + } else { + biWidth = SDL_ReadLE32(src); + biHeight = SDL_ReadLE32(src); + biPlanes = SDL_ReadLE16(src); + biBitCount = SDL_ReadLE16(src); + biCompression = SDL_ReadLE32(src); + biSizeImage = SDL_ReadLE32(src); + biXPelsPerMeter = SDL_ReadLE32(src); + biYPelsPerMeter = SDL_ReadLE32(src); + biClrUsed = SDL_ReadLE32(src); + biClrImportant = SDL_ReadLE32(src); + } + if (biHeight < 0) { + topDown = SDL_TRUE; + biHeight = -biHeight; + } else { + topDown = SDL_FALSE; + } + + /* Check for read error */ + if ( strcmp(SDL_GetError(), "") != 0 ) { + was_error = SDL_TRUE; + goto done; + } + + /* Expand 1 and 4 bit bitmaps to 8 bits per pixel */ + switch (biBitCount) { + case 1: + case 4: + ExpandBMP = biBitCount; + biBitCount = 8; + break; + default: + ExpandBMP = 0; + break; + } + + /* RLE4 and RLE8 BMP compression is supported */ + Rmask = Gmask = Bmask = Amask = 0; + switch (biCompression) { + case BI_RGB: + /* If there are no masks, use the defaults */ + if ( bfOffBits == (14+biSize) ) { + /* Default values for the BMP format */ + switch (biBitCount) { + case 15: + case 16: + Rmask = 0x7C00; + Gmask = 0x03E0; + Bmask = 0x001F; + break; + case 24: +#if SDL_BYTEORDER == SDL_BIG_ENDIAN + Rmask = 0x000000FF; + Gmask = 0x0000FF00; + Bmask = 0x00FF0000; +#else + Rmask = 0x00FF0000; + Gmask = 0x0000FF00; + Bmask = 0x000000FF; +#endif + break; + case 32: + /* We don't know if this has alpha channel or not */ + correctAlpha = SDL_TRUE; + Amask = 0xFF000000; + Rmask = 0x00FF0000; + Gmask = 0x0000FF00; + Bmask = 0x000000FF; + break; + default: + break; + } + break; + } + /* Fall through -- read the RGB masks */ + + default: + switch (biBitCount) { + case 15: + case 16: + Rmask = SDL_ReadLE32(src); + Gmask = SDL_ReadLE32(src); + Bmask = SDL_ReadLE32(src); + break; + case 32: + Rmask = SDL_ReadLE32(src); + Gmask = SDL_ReadLE32(src); + Bmask = SDL_ReadLE32(src); + Amask = SDL_ReadLE32(src); + break; + default: + break; + } + break; + } + + /* Create a compatible surface, note that the colors are RGB ordered */ + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, + biWidth, biHeight, biBitCount, Rmask, Gmask, Bmask, Amask); + if ( surface == NULL ) { + was_error = SDL_TRUE; + goto done; + } + + /* Load the palette, if any */ + palette = (surface->format)->palette; + if ( palette ) { + if ( SDL_RWseek(src, fp_offset+14+biSize, RW_SEEK_SET) < 0 ) { + SDL_Error(SDL_EFSEEK); + was_error = SDL_TRUE; + goto done; + } + + /* + | guich: always use 1<colors[i].b, 1, 1); + SDL_RWread(src, &palette->colors[i].g, 1, 1); + SDL_RWread(src, &palette->colors[i].r, 1, 1); + palette->colors[i].a = SDL_ALPHA_OPAQUE; + } + } else { + for ( i = 0; i < (int)biClrUsed; ++i ) { + SDL_RWread(src, &palette->colors[i].b, 1, 1); + SDL_RWread(src, &palette->colors[i].g, 1, 1); + SDL_RWread(src, &palette->colors[i].r, 1, 1); + SDL_RWread(src, &palette->colors[i].a, 1, 1); + + /* According to Microsoft documentation, the fourth element + is reserved and must be zero, so we shouldn't treat it as + alpha. + */ + palette->colors[i].a = SDL_ALPHA_OPAQUE; + } + } + palette->ncolors = biClrUsed; + } + + /* Read the surface pixels. Note that the bmp image is upside down */ + if ( SDL_RWseek(src, fp_offset+bfOffBits, RW_SEEK_SET) < 0 ) { + SDL_Error(SDL_EFSEEK); + was_error = SDL_TRUE; + goto done; + } + if ((biCompression == BI_RLE4) || (biCompression == BI_RLE8)) { + was_error = (SDL_bool)readRlePixels(surface, src, biCompression == BI_RLE8); + if (was_error) IMG_SetError("Error reading from BMP"); + goto done; + } + top = (Uint8 *)surface->pixels; + end = (Uint8 *)surface->pixels+(surface->h*surface->pitch); + switch (ExpandBMP) { + case 1: + bmpPitch = (biWidth + 7) >> 3; + pad = (((bmpPitch)%4) ? (4-((bmpPitch)%4)) : 0); + break; + case 4: + bmpPitch = (biWidth + 1) >> 1; + pad = (((bmpPitch)%4) ? (4-((bmpPitch)%4)) : 0); + break; + default: + pad = ((surface->pitch%4) ? + (4-(surface->pitch%4)) : 0); + break; + } + if ( topDown ) { + bits = top; + } else { + bits = end - surface->pitch; + } + while ( bits >= top && bits < end ) { + switch (ExpandBMP) { + case 1: + case 4: { + Uint8 pixel = 0; + int shift = (8-ExpandBMP); + for ( i=0; iw; ++i ) { + if ( i%(8/ExpandBMP) == 0 ) { + if ( !SDL_RWread(src, &pixel, 1, 1) ) { + IMG_SetError("Error reading from BMP"); + was_error = SDL_TRUE; + goto done; + } + } + *(bits+i) = (pixel>>shift); + pixel <<= ExpandBMP; + } } + break; + + default: + if ( SDL_RWread(src, bits, 1, surface->pitch) != surface->pitch ) { + SDL_Error(SDL_EFREAD); + was_error = SDL_TRUE; + goto done; + } +#if SDL_BYTEORDER == SDL_BIG_ENDIAN + /* Byte-swap the pixels if needed. Note that the 24bpp + case has already been taken care of above. */ + switch(biBitCount) { + case 15: + case 16: { + Uint16 *pix = (Uint16 *)bits; + for(i = 0; i < surface->w; i++) + pix[i] = SDL_Swap16(pix[i]); + break; + } + + case 32: { + Uint32 *pix = (Uint32 *)bits; + for(i = 0; i < surface->w; i++) + pix[i] = SDL_Swap32(pix[i]); + break; + } + } +#endif + break; + } + /* Skip padding bytes, ugh */ + if ( pad ) { + Uint8 padbyte; + for ( i=0; ipitch; + } else { + bits -= surface->pitch; + } + } + if (correctAlpha) { + CorrectAlphaChannel(surface); + } +done: + if ( was_error ) { + if ( src ) { + SDL_RWseek(src, fp_offset, RW_SEEK_SET); + } + if ( surface ) { + SDL_FreeSurface(surface); + } + surface = NULL; + } + if ( freesrc && src ) { + SDL_RWclose(src); + } + return(surface); +} + +static Uint8 +SDL_Read8(SDL_RWops * src) +{ + Uint8 value; + + SDL_RWread(src, &value, 1, 1); + return (value); +} + +static SDL_Surface * +LoadICOCUR_RW(SDL_RWops * src, int type, int freesrc) +{ + SDL_bool was_error; + Sint64 fp_offset; + int bmpPitch; + int i, pad; + SDL_Surface *surface; + Uint32 Rmask; + Uint32 Gmask; + Uint32 Bmask; + Uint8 *bits; + int ExpandBMP; + int maxCol = 0; + int icoOfs = 0; + Uint32 palette[256]; + + /* The Win32 ICO file header (14 bytes) */ + Uint16 bfReserved; + Uint16 bfType; + Uint16 bfCount; + + /* The Win32 BITMAPINFOHEADER struct (40 bytes) */ + Uint32 biSize; + Sint32 biWidth; + Sint32 biHeight; + Uint16 biPlanes; + Uint16 biBitCount; + Uint32 biCompression; + Uint32 biSizeImage; + Sint32 biXPelsPerMeter; + Sint32 biYPelsPerMeter; + Uint32 biClrUsed; + Uint32 biClrImportant; + + /* Make sure we are passed a valid data source */ + surface = NULL; + was_error = SDL_FALSE; + if (src == NULL) { + was_error = SDL_TRUE; + goto done; + } + + /* Read in the ICO file header */ + fp_offset = SDL_RWtell(src); + SDL_ClearError(); + + bfReserved = SDL_ReadLE16(src); + bfType = SDL_ReadLE16(src); + bfCount = SDL_ReadLE16(src); + if ((bfReserved != 0) || (bfType != type) || (bfCount == 0)) { + IMG_SetError("File is not a Windows %s file", type == 1 ? "ICO" : "CUR"); + was_error = SDL_TRUE; + goto done; + } + + /* Read the Win32 Icon Directory */ + for (i = 0; i < bfCount; i++) { + /* Icon Directory Entries */ + int bWidth = SDL_Read8(src); /* Uint8, but 0 = 256 ! */ + int bHeight = SDL_Read8(src); /* Uint8, but 0 = 256 ! */ + int bColorCount = SDL_Read8(src); /* Uint8, but 0 = 256 ! */ + Uint8 bReserved = SDL_Read8(src); + Uint16 wPlanes = SDL_ReadLE16(src); + Uint16 wBitCount = SDL_ReadLE16(src); + Uint32 dwBytesInRes = SDL_ReadLE32(src); + Uint32 dwImageOffset = SDL_ReadLE32(src); + + if (!bWidth) + bWidth = 256; + if (!bHeight) + bHeight = 256; + if (!bColorCount) + bColorCount = 256; + + //printf("%dx%d@%d - %08x\n", bWidth, bHeight, bColorCount, dwImageOffset); + if (bColorCount > maxCol) { + maxCol = bColorCount; + icoOfs = dwImageOffset; + //printf("marked\n"); + } + } + + /* Advance to the DIB Data */ + if (SDL_RWseek(src, icoOfs, RW_SEEK_SET) < 0) { + SDL_Error(SDL_EFSEEK); + was_error = SDL_TRUE; + goto done; + } + + /* Read the Win32 BITMAPINFOHEADER */ + biSize = SDL_ReadLE32(src); + if (biSize == 40) { + biWidth = SDL_ReadLE32(src); + biHeight = SDL_ReadLE32(src); + biPlanes = SDL_ReadLE16(src); + biBitCount = SDL_ReadLE16(src); + biCompression = SDL_ReadLE32(src); + biSizeImage = SDL_ReadLE32(src); + biXPelsPerMeter = SDL_ReadLE32(src); + biYPelsPerMeter = SDL_ReadLE32(src); + biClrUsed = SDL_ReadLE32(src); + biClrImportant = SDL_ReadLE32(src); + } else { + IMG_SetError("Unsupported ICO bitmap format"); + was_error = SDL_TRUE; + goto done; + } + + /* Check for read error */ + if (SDL_strcmp(SDL_GetError(), "") != 0) { + was_error = SDL_TRUE; + goto done; + } + + /* We don't support any BMP compression right now */ + switch (biCompression) { + case BI_RGB: + /* Default values for the BMP format */ + switch (biBitCount) { + case 1: + case 4: + ExpandBMP = biBitCount; + biBitCount = 8; + break; + case 8: + ExpandBMP = 8; + break; + case 32: + Rmask = 0x00FF0000; + Gmask = 0x0000FF00; + Bmask = 0x000000FF; + ExpandBMP = 0; + break; + default: + IMG_SetError("ICO file with unsupported bit count"); + was_error = SDL_TRUE; + goto done; + } + break; + default: + IMG_SetError("Compressed ICO files not supported"); + was_error = SDL_TRUE; + goto done; + } + + /* Create a RGBA surface */ + biHeight = biHeight >> 1; + //printf("%d x %d\n", biWidth, biHeight); + surface = + SDL_CreateRGBSurface(0, biWidth, biHeight, 32, 0x00FF0000, + 0x0000FF00, 0x000000FF, 0xFF000000); + if (surface == NULL) { + was_error = SDL_TRUE; + goto done; + } + + /* Load the palette, if any */ + //printf("bc %d bused %d\n", biBitCount, biClrUsed); + if (biBitCount <= 8) { + if (biClrUsed == 0) { + biClrUsed = 1 << biBitCount; + } + for (i = 0; i < (int) biClrUsed; ++i) { + SDL_RWread(src, &palette[i], 4, 1); + } + } + + /* Read the surface pixels. Note that the bmp image is upside down */ + bits = (Uint8 *) surface->pixels + (surface->h * surface->pitch); + switch (ExpandBMP) { + case 1: + bmpPitch = (biWidth + 7) >> 3; + pad = (((bmpPitch) % 4) ? (4 - ((bmpPitch) % 4)) : 0); + break; + case 4: + bmpPitch = (biWidth + 1) >> 1; + pad = (((bmpPitch) % 4) ? (4 - ((bmpPitch) % 4)) : 0); + break; + case 8: + bmpPitch = biWidth; + pad = (((bmpPitch) % 4) ? (4 - ((bmpPitch) % 4)) : 0); + break; + default: + bmpPitch = biWidth * 4; + pad = 0; + break; + } + while (bits > (Uint8 *) surface->pixels) { + bits -= surface->pitch; + switch (ExpandBMP) { + case 1: + case 4: + case 8: + { + Uint8 pixel = 0; + int shift = (8 - ExpandBMP); + for (i = 0; i < surface->w; ++i) { + if (i % (8 / ExpandBMP) == 0) { + if (!SDL_RWread(src, &pixel, 1, 1)) { + IMG_SetError("Error reading from ICO"); + was_error = SDL_TRUE; + goto done; + } + } + *((Uint32 *) bits + i) = (palette[pixel >> shift]); + pixel <<= ExpandBMP; + } + } + break; + + default: + if (SDL_RWread(src, bits, 1, surface->pitch) + != surface->pitch) { + SDL_Error(SDL_EFREAD); + was_error = SDL_TRUE; + goto done; + } + break; + } + /* Skip padding bytes, ugh */ + if (pad) { + Uint8 padbyte; + for (i = 0; i < pad; ++i) { + SDL_RWread(src, &padbyte, 1, 1); + } + } + } + /* Read the mask pixels. Note that the bmp image is upside down */ + bits = (Uint8 *) surface->pixels + (surface->h * surface->pitch); + ExpandBMP = 1; + bmpPitch = (biWidth + 7) >> 3; + pad = (((bmpPitch) % 4) ? (4 - ((bmpPitch) % 4)) : 0); + while (bits > (Uint8 *) surface->pixels) { + Uint8 pixel = 0; + int shift = (8 - ExpandBMP); + + bits -= surface->pitch; + for (i = 0; i < surface->w; ++i) { + if (i % (8 / ExpandBMP) == 0) { + if (!SDL_RWread(src, &pixel, 1, 1)) { + IMG_SetError("Error reading from ICO"); + was_error = SDL_TRUE; + goto done; + } + } + *((Uint32 *) bits + i) |= ((pixel >> shift) ? 0 : 0xFF000000); + pixel <<= ExpandBMP; + } + /* Skip padding bytes, ugh */ + if (pad) { + Uint8 padbyte; + for (i = 0; i < pad; ++i) { + SDL_RWread(src, &padbyte, 1, 1); + } + } + } + done: + if (was_error) { + if (src) { + SDL_RWseek(src, fp_offset, RW_SEEK_SET); + } + if (surface) { + SDL_FreeSurface(surface); + } + surface = NULL; + } + if (freesrc && src) { + SDL_RWclose(src); + } + return (surface); +} + +/* Load a BMP type image from an SDL datasource */ +SDL_Surface *IMG_LoadBMP_RW(SDL_RWops *src) +{ + return(LoadBMP_RW(src, 0)); +} + +/* Load a ICO type image from an SDL datasource */ +SDL_Surface *IMG_LoadICO_RW(SDL_RWops *src) +{ + return(LoadICOCUR_RW(src, 1, 0)); +} + +/* Load a CUR type image from an SDL datasource */ +SDL_Surface *IMG_LoadCUR_RW(SDL_RWops *src) +{ + return(LoadICOCUR_RW(src, 2, 0)); +} + +#else + +/* See if an image is contained in a data source */ +int IMG_isBMP(SDL_RWops *src) +{ + return(0); +} + +int IMG_isICO(SDL_RWops *src) +{ + return(0); +} + +int IMG_isCUR(SDL_RWops *src) +{ + return(0); +} + +/* Load a BMP type image from an SDL datasource */ +SDL_Surface *IMG_LoadBMP_RW(SDL_RWops *src) +{ + return(NULL); +} + +/* Load a BMP type image from an SDL datasource */ +SDL_Surface *IMG_LoadCUR_RW(SDL_RWops *src) +{ + return(NULL); +} + +/* Load a BMP type image from an SDL datasource */ +SDL_Surface *IMG_LoadICO_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_BMP */ + +#endif /* !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) */ diff --git a/src/SDL2/IMG_gif.c b/src/SDL2/IMG_gif.c new file mode 100644 index 000000000..aef686362 --- /dev/null +++ b/src/SDL2/IMG_gif.c @@ -0,0 +1,636 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#if !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) + +/* This is a GIF image file loading framework */ + +#include +#include + +#include "SDL_image.h" + +#ifdef LOAD_GIF + +/* See if an image is contained in a data source */ +int IMG_isGIF(SDL_RWops *src) +{ + Sint64 start; + int is_GIF; + char magic[6]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_GIF = 0; + if ( SDL_RWread(src, magic, sizeof(magic), 1) ) { + if ( (SDL_strncmp(magic, "GIF", 3) == 0) && + ((SDL_memcmp(magic + 3, "87a", 3) == 0) || + (SDL_memcmp(magic + 3, "89a", 3) == 0)) ) { + is_GIF = 1; + } + } + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_GIF); +} + +/* Code from here to end of file has been adapted from XPaint: */ +/* +-------------------------------------------------------------------+ */ +/* | Copyright 1990, 1991, 1993 David Koblas. | */ +/* | Copyright 1996 Torsten Martinsen. | */ +/* | Permission to use, copy, modify, and distribute this software | */ +/* | and its documentation for any purpose and without fee is hereby | */ +/* | granted, provided that the above copyright notice appear in all | */ +/* | copies and that both that copyright notice and this permission | */ +/* | notice appear in supporting documentation. This software is | */ +/* | provided "as is" without express or implied warranty. | */ +/* +-------------------------------------------------------------------+ */ + +/* Adapted for use in SDL by Sam Lantinga -- 7/20/98 */ +#define USED_BY_SDL + +#include +#include + +#ifdef USED_BY_SDL +/* Changes to work with SDL: + + Include SDL header file + Use SDL_Surface rather than xpaint Image structure + Define SDL versions of RWSetMsg(), ImageNewCmap() and ImageSetCmap() +*/ +#include "SDL.h" + +#define Image SDL_Surface +#define RWSetMsg IMG_SetError +#define ImageNewCmap(w, h, s) SDL_CreateRGBSurface(SDL_SWSURFACE,w,h,8,0,0,0,0) +#define ImageSetCmap(s, i, R, G, B) do { \ + s->format->palette->colors[i].r = R; \ + s->format->palette->colors[i].g = G; \ + s->format->palette->colors[i].b = B; \ + } while (0) +/* * * * * */ + +#else + +/* Original XPaint sources */ + +#include "image.h" +#include "rwTable.h" + +#define SDL_RWops FILE +#define SDL_RWclose fclose + +#endif /* USED_BY_SDL */ + + +#define MAXCOLORMAPSIZE 256 + +#define TRUE 1 +#define FALSE 0 + +#define CM_RED 0 +#define CM_GREEN 1 +#define CM_BLUE 2 + +#define MAX_LWZ_BITS 12 + +#define INTERLACE 0x40 +#define LOCALCOLORMAP 0x80 +#define BitSet(byte, bit) (((byte) & (bit)) == (bit)) + +#define ReadOK(file,buffer,len) SDL_RWread(file, buffer, len, 1) + +#define LM_to_uint(a,b) (((b)<<8)|(a)) + +static struct { + unsigned int Width; + unsigned int Height; + unsigned char ColorMap[3][MAXCOLORMAPSIZE]; + unsigned int BitPixel; + unsigned int ColorResolution; + unsigned int Background; + unsigned int AspectRatio; + int GrayScale; +} GifScreen; + +static struct { + int transparent; + int delayTime; + int inputFlag; + int disposal; +} Gif89; + +static int ReadColorMap(SDL_RWops * src, int number, + unsigned char buffer[3][MAXCOLORMAPSIZE], int *flag); +static int DoExtension(SDL_RWops * src, int label); +static int GetDataBlock(SDL_RWops * src, unsigned char *buf); +static int GetCode(SDL_RWops * src, int code_size, int flag); +static int LWZReadByte(SDL_RWops * src, int flag, int input_code_size); +static Image *ReadImage(SDL_RWops * src, int len, int height, int, + unsigned char cmap[3][MAXCOLORMAPSIZE], + int gray, int interlace, int ignore); + +Image * +IMG_LoadGIF_RW(SDL_RWops *src) +{ + Sint64 start; + unsigned char buf[16]; + unsigned char c; + unsigned char localColorMap[3][MAXCOLORMAPSIZE]; + int grayScale; + int useGlobalColormap; + int bitPixel; + int imageCount = 0; + char version[4]; + int imageNumber = 1; + Image *image = NULL; + + if ( src == NULL ) { + return NULL; + } + start = SDL_RWtell(src); + + if (!ReadOK(src, buf, 6)) { + RWSetMsg("error reading magic number"); + goto done; + } + if (SDL_strncmp((char *) buf, "GIF", 3) != 0) { + RWSetMsg("not a GIF file"); + goto done; + } + SDL_memcpy(version, (char *) buf + 3, 3); + version[3] = '\0'; + + if ((SDL_strcmp(version, "87a") != 0) && (SDL_strcmp(version, "89a") != 0)) { + RWSetMsg("bad version number, not '87a' or '89a'"); + goto done; + } + Gif89.transparent = -1; + Gif89.delayTime = -1; + Gif89.inputFlag = -1; + Gif89.disposal = 0; + + if (!ReadOK(src, buf, 7)) { + RWSetMsg("failed to read screen descriptor"); + goto done; + } + GifScreen.Width = LM_to_uint(buf[0], buf[1]); + GifScreen.Height = LM_to_uint(buf[2], buf[3]); + GifScreen.BitPixel = 2 << (buf[4] & 0x07); + GifScreen.ColorResolution = (((buf[4] & 0x70) >> 3) + 1); + GifScreen.Background = buf[5]; + GifScreen.AspectRatio = buf[6]; + + if (BitSet(buf[4], LOCALCOLORMAP)) { /* Global Colormap */ + if (ReadColorMap(src, GifScreen.BitPixel, GifScreen.ColorMap, + &GifScreen.GrayScale)) { + RWSetMsg("error reading global colormap"); + goto done; + } + } + do { + if (!ReadOK(src, &c, 1)) { + RWSetMsg("EOF / read error on image data"); + goto done; + } + if (c == ';') { /* GIF terminator */ + if (imageCount < imageNumber) { + RWSetMsg("only %d image%s found in file", + imageCount, imageCount > 1 ? "s" : ""); + goto done; + } + } + if (c == '!') { /* Extension */ + if (!ReadOK(src, &c, 1)) { + RWSetMsg("EOF / read error on extention function code"); + goto done; + } + DoExtension(src, c); + continue; + } + if (c != ',') { /* Not a valid start character */ + continue; + } + ++imageCount; + + if (!ReadOK(src, buf, 9)) { + RWSetMsg("couldn't read left/top/width/height"); + goto done; + } + useGlobalColormap = !BitSet(buf[8], LOCALCOLORMAP); + + bitPixel = 1 << ((buf[8] & 0x07) + 1); + + if (!useGlobalColormap) { + if (ReadColorMap(src, bitPixel, localColorMap, &grayScale)) { + RWSetMsg("error reading local colormap"); + goto done; + } + image = ReadImage(src, LM_to_uint(buf[4], buf[5]), + LM_to_uint(buf[6], buf[7]), + bitPixel, localColorMap, grayScale, + BitSet(buf[8], INTERLACE), + imageCount != imageNumber); + } else { + image = ReadImage(src, LM_to_uint(buf[4], buf[5]), + LM_to_uint(buf[6], buf[7]), + GifScreen.BitPixel, GifScreen.ColorMap, + GifScreen.GrayScale, BitSet(buf[8], INTERLACE), + imageCount != imageNumber); + } + } while (image == NULL); + +#ifdef USED_BY_SDL + if ( Gif89.transparent >= 0 ) { + SDL_SetColorKey(image, SDL_TRUE, Gif89.transparent); + } +#endif + +done: + if ( image == NULL ) { + SDL_RWseek(src, start, RW_SEEK_SET); + } + return image; +} + +static int +ReadColorMap(SDL_RWops *src, int number, + unsigned char buffer[3][MAXCOLORMAPSIZE], int *gray) +{ + int i; + unsigned char rgb[3]; + int flag; + + flag = TRUE; + + for (i = 0; i < number; ++i) { + if (!ReadOK(src, rgb, sizeof(rgb))) { + RWSetMsg("bad colormap"); + return 1; + } + buffer[CM_RED][i] = rgb[0]; + buffer[CM_GREEN][i] = rgb[1]; + buffer[CM_BLUE][i] = rgb[2]; + flag &= (rgb[0] == rgb[1] && rgb[1] == rgb[2]); + } + +#if 0 + if (flag) + *gray = (number == 2) ? PBM_TYPE : PGM_TYPE; + else + *gray = PPM_TYPE; +#else + *gray = 0; +#endif + + return FALSE; +} + +static int +DoExtension(SDL_RWops *src, int label) +{ + static unsigned char buf[256]; + char *str; + + switch (label) { + case 0x01: /* Plain Text Extension */ + str = "Plain Text Extension"; + break; + case 0xff: /* Application Extension */ + str = "Application Extension"; + break; + case 0xfe: /* Comment Extension */ + str = "Comment Extension"; + while (GetDataBlock(src, (unsigned char *) buf) != 0) + ; + return FALSE; + case 0xf9: /* Graphic Control Extension */ + str = "Graphic Control Extension"; + (void) GetDataBlock(src, (unsigned char *) buf); + Gif89.disposal = (buf[0] >> 2) & 0x7; + Gif89.inputFlag = (buf[0] >> 1) & 0x1; + Gif89.delayTime = LM_to_uint(buf[1], buf[2]); + if ((buf[0] & 0x1) != 0) + Gif89.transparent = buf[3]; + + while (GetDataBlock(src, (unsigned char *) buf) != 0) + ; + return FALSE; + default: + str = (char *)buf; + SDL_snprintf(str, 256, "UNKNOWN (0x%02x)", label); + break; + } + + while (GetDataBlock(src, (unsigned char *) buf) != 0) + ; + + return FALSE; +} + +static int ZeroDataBlock = FALSE; + +static int +GetDataBlock(SDL_RWops *src, unsigned char *buf) +{ + unsigned char count; + + if (!ReadOK(src, &count, 1)) { + /* pm_message("error in getting DataBlock size" ); */ + return -1; + } + ZeroDataBlock = count == 0; + + if ((count != 0) && (!ReadOK(src, buf, count))) { + /* pm_message("error in reading DataBlock" ); */ + return -1; + } + return count; +} + +static int +GetCode(SDL_RWops *src, int code_size, int flag) +{ + static unsigned char buf[280]; + static int curbit, lastbit, done, last_byte; + int i, j, ret; + unsigned char count; + + if (flag) { + curbit = 0; + lastbit = 0; + done = FALSE; + return 0; + } + if ((curbit + code_size) >= lastbit) { + if (done) { + if (curbit >= lastbit) + RWSetMsg("ran off the end of my bits"); + return -1; + } + buf[0] = buf[last_byte - 2]; + buf[1] = buf[last_byte - 1]; + + if ((count = GetDataBlock(src, &buf[2])) == 0) + done = TRUE; + + last_byte = 2 + count; + curbit = (curbit - lastbit) + 16; + lastbit = (2 + count) * 8; + } + ret = 0; + for (i = curbit, j = 0; j < code_size; ++i, ++j) + ret |= ((buf[i / 8] & (1 << (i % 8))) != 0) << j; + + curbit += code_size; + + return ret; +} + +static int +LWZReadByte(SDL_RWops *src, int flag, int input_code_size) +{ + static int fresh = FALSE; + int code, incode; + static int code_size, set_code_size; + static int max_code, max_code_size; + static int firstcode, oldcode; + static int clear_code, end_code; + static int table[2][(1 << MAX_LWZ_BITS)]; + static int stack[(1 << (MAX_LWZ_BITS)) * 2], *sp; + register int i; + + /* Fixed buffer overflow found by Michael Skladnikiewicz */ + if (input_code_size > MAX_LWZ_BITS) + return -1; + + if (flag) { + set_code_size = input_code_size; + code_size = set_code_size + 1; + clear_code = 1 << set_code_size; + end_code = clear_code + 1; + max_code_size = 2 * clear_code; + max_code = clear_code + 2; + + GetCode(src, 0, TRUE); + + fresh = TRUE; + + for (i = 0; i < clear_code; ++i) { + table[0][i] = 0; + table[1][i] = i; + } + table[1][0] = 0; + for (; i < (1 << MAX_LWZ_BITS); ++i) + table[0][i] = 0; + + sp = stack; + + return 0; + } else if (fresh) { + fresh = FALSE; + do { + firstcode = oldcode = GetCode(src, code_size, FALSE); + } while (firstcode == clear_code); + return firstcode; + } + if (sp > stack) + return *--sp; + + while ((code = GetCode(src, code_size, FALSE)) >= 0) { + if (code == clear_code) { + for (i = 0; i < clear_code; ++i) { + table[0][i] = 0; + table[1][i] = i; + } + for (; i < (1 << MAX_LWZ_BITS); ++i) + table[0][i] = table[1][i] = 0; + code_size = set_code_size + 1; + max_code_size = 2 * clear_code; + max_code = clear_code + 2; + sp = stack; + firstcode = oldcode = GetCode(src, code_size, FALSE); + return firstcode; + } else if (code == end_code) { + int count; + unsigned char buf[260]; + + if (ZeroDataBlock) + return -2; + + while ((count = GetDataBlock(src, buf)) > 0) + ; + + if (count != 0) { + /* + * pm_message("missing EOD in data stream (common occurence)"); + */ + } + return -2; + } + incode = code; + + if (code >= max_code) { + *sp++ = firstcode; + code = oldcode; + } + while (code >= clear_code) { + /* Guard against buffer overruns */ + if (code < 0 || code >= (1 << MAX_LWZ_BITS)) { + RWSetMsg("invalid LWZ data"); + return -3; + } + *sp++ = table[1][code]; + if (code == table[0][code]) + RWSetMsg("circular table entry BIG ERROR"); + code = table[0][code]; + } + + /* Guard against buffer overruns */ + if (code < 0 || code >= (1 << MAX_LWZ_BITS)) { + RWSetMsg("invalid LWZ data"); + return -4; + } + *sp++ = firstcode = table[1][code]; + + if ((code = max_code) < (1 << MAX_LWZ_BITS)) { + table[0][code] = oldcode; + table[1][code] = firstcode; + ++max_code; + if ((max_code >= max_code_size) && + (max_code_size < (1 << MAX_LWZ_BITS))) { + max_code_size *= 2; + ++code_size; + } + } + oldcode = incode; + + if (sp > stack) + return *--sp; + } + return code; +} + +static Image * +ReadImage(SDL_RWops * src, int len, int height, int cmapSize, + unsigned char cmap[3][MAXCOLORMAPSIZE], + int gray, int interlace, int ignore) +{ + Image *image; + unsigned char c; + int i, v; + int xpos = 0, ypos = 0, pass = 0; + + /* + ** Initialize the compression routines + */ + if (!ReadOK(src, &c, 1)) { + RWSetMsg("EOF / read error on image data"); + return NULL; + } + if (LWZReadByte(src, TRUE, c) < 0) { + RWSetMsg("error reading image"); + return NULL; + } + /* + ** If this is an "uninteresting picture" ignore it. + */ + if (ignore) { + while (LWZReadByte(src, FALSE, c) >= 0) + ; + return NULL; + } + image = ImageNewCmap(len, height, cmapSize); + + for (i = 0; i < cmapSize; i++) + ImageSetCmap(image, i, cmap[CM_RED][i], + cmap[CM_GREEN][i], cmap[CM_BLUE][i]); + + while ((v = LWZReadByte(src, FALSE, c)) >= 0) { +#ifdef USED_BY_SDL + ((Uint8 *)image->pixels)[xpos + ypos * image->pitch] = v; +#else + image->data[xpos + ypos * len] = v; +#endif + ++xpos; + if (xpos == len) { + xpos = 0; + if (interlace) { + switch (pass) { + case 0: + case 1: + ypos += 8; + break; + case 2: + ypos += 4; + break; + case 3: + ypos += 2; + break; + } + + if (ypos >= height) { + ++pass; + switch (pass) { + case 1: + ypos = 4; + break; + case 2: + ypos = 2; + break; + case 3: + ypos = 1; + break; + default: + goto fini; + } + } + } else { + ++ypos; + } + } + if (ypos >= height) + break; + } + + fini: + + return image; +} + +#else + +/* See if an image is contained in a data source */ +int IMG_isGIF(SDL_RWops *src) +{ + return(0); +} + +/* Load a GIF type image from an SDL datasource */ +SDL_Surface *IMG_LoadGIF_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_GIF */ + +#endif /* !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) */ diff --git a/src/SDL2/IMG_jpg.c b/src/SDL2/IMG_jpg.c new file mode 100644 index 000000000..d39d4bd9e --- /dev/null +++ b/src/SDL2/IMG_jpg.c @@ -0,0 +1,495 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#if !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) + +/* This is a JPEG image file loading framework */ + +#include +#include +#include + +#include "SDL_image.h" + +#ifdef LOAD_JPG + +#include + +#ifdef JPEG_TRUE /* MinGW version of jpeg-8.x renamed TRUE to JPEG_TRUE etc. */ + typedef JPEG_boolean boolean; + #define TRUE JPEG_TRUE + #define FALSE JPEG_FALSE +#endif + +/* Define this for fast loading and not as good image quality */ +/*#define FAST_JPEG*/ + +/* Define this for quicker (but less perfect) JPEG identification */ +#define FAST_IS_JPEG + +static struct { + int loaded; + void *handle; + void (*jpeg_calc_output_dimensions) (j_decompress_ptr cinfo); + void (*jpeg_CreateDecompress) (j_decompress_ptr cinfo, int version, size_t structsize); + void (*jpeg_destroy_decompress) (j_decompress_ptr cinfo); + boolean (*jpeg_finish_decompress) (j_decompress_ptr cinfo); + int (*jpeg_read_header) (j_decompress_ptr cinfo, boolean require_image); + JDIMENSION (*jpeg_read_scanlines) (j_decompress_ptr cinfo, JSAMPARRAY scanlines, JDIMENSION max_lines); + boolean (*jpeg_resync_to_restart) (j_decompress_ptr cinfo, int desired); + boolean (*jpeg_start_decompress) (j_decompress_ptr cinfo); + struct jpeg_error_mgr * (*jpeg_std_error) (struct jpeg_error_mgr * err); +} lib; + +#ifdef LOAD_JPG_DYNAMIC +int IMG_InitJPG() +{ + if ( lib.loaded == 0 ) { + lib.handle = SDL_LoadObject(LOAD_JPG_DYNAMIC); + if ( lib.handle == NULL ) { + return -1; + } + lib.jpeg_calc_output_dimensions = + (void (*) (j_decompress_ptr)) + SDL_LoadFunction(lib.handle, "jpeg_calc_output_dimensions"); + if ( lib.jpeg_calc_output_dimensions == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.jpeg_CreateDecompress = + (void (*) (j_decompress_ptr, int, size_t)) + SDL_LoadFunction(lib.handle, "jpeg_CreateDecompress"); + if ( lib.jpeg_CreateDecompress == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.jpeg_destroy_decompress = + (void (*) (j_decompress_ptr)) + SDL_LoadFunction(lib.handle, "jpeg_destroy_decompress"); + if ( lib.jpeg_destroy_decompress == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.jpeg_finish_decompress = + (boolean (*) (j_decompress_ptr)) + SDL_LoadFunction(lib.handle, "jpeg_finish_decompress"); + if ( lib.jpeg_finish_decompress == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.jpeg_read_header = + (int (*) (j_decompress_ptr, boolean)) + SDL_LoadFunction(lib.handle, "jpeg_read_header"); + if ( lib.jpeg_read_header == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.jpeg_read_scanlines = + (JDIMENSION (*) (j_decompress_ptr, JSAMPARRAY, JDIMENSION)) + SDL_LoadFunction(lib.handle, "jpeg_read_scanlines"); + if ( lib.jpeg_read_scanlines == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.jpeg_resync_to_restart = + (boolean (*) (j_decompress_ptr, int)) + SDL_LoadFunction(lib.handle, "jpeg_resync_to_restart"); + if ( lib.jpeg_resync_to_restart == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.jpeg_start_decompress = + (boolean (*) (j_decompress_ptr)) + SDL_LoadFunction(lib.handle, "jpeg_start_decompress"); + if ( lib.jpeg_start_decompress == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.jpeg_std_error = + (struct jpeg_error_mgr * (*) (struct jpeg_error_mgr *)) + SDL_LoadFunction(lib.handle, "jpeg_std_error"); + if ( lib.jpeg_std_error == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + } + ++lib.loaded; + + return 0; +} +void IMG_QuitJPG() +{ + if ( lib.loaded == 0 ) { + return; + } + if ( lib.loaded == 1 ) { + SDL_UnloadObject(lib.handle); + } + --lib.loaded; +} +#else +int IMG_InitJPG() +{ + if ( lib.loaded == 0 ) { + lib.jpeg_calc_output_dimensions = jpeg_calc_output_dimensions; + lib.jpeg_CreateDecompress = jpeg_CreateDecompress; + lib.jpeg_destroy_decompress = jpeg_destroy_decompress; + lib.jpeg_finish_decompress = jpeg_finish_decompress; + lib.jpeg_read_header = jpeg_read_header; + lib.jpeg_read_scanlines = jpeg_read_scanlines; + lib.jpeg_resync_to_restart = jpeg_resync_to_restart; + lib.jpeg_start_decompress = jpeg_start_decompress; + lib.jpeg_std_error = jpeg_std_error; + } + ++lib.loaded; + + return 0; +} +void IMG_QuitJPG() +{ + if ( lib.loaded == 0 ) { + return; + } + if ( lib.loaded == 1 ) { + } + --lib.loaded; +} +#endif /* LOAD_JPG_DYNAMIC */ + +/* See if an image is contained in a data source */ +int IMG_isJPG(SDL_RWops *src) +{ + Sint64 start; + int is_JPG; + int in_scan; + Uint8 magic[4]; + + /* This detection code is by Steaphan Greene */ + /* Blame me, not Sam, if this doesn't work right. */ + /* And don't forget to report the problem to the the sdl list too! */ + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_JPG = 0; + in_scan = 0; + if ( SDL_RWread(src, magic, 2, 1) ) { + if ( (magic[0] == 0xFF) && (magic[1] == 0xD8) ) { + is_JPG = 1; + while (is_JPG == 1) { + if(SDL_RWread(src, magic, 1, 2) != 2) { + is_JPG = 0; + } else if( (magic[0] != 0xFF) && (in_scan == 0) ) { + is_JPG = 0; + } else if( (magic[0] != 0xFF) || (magic[1] == 0xFF) ) { + /* Extra padding in JPEG (legal) */ + /* or this is data and we are scanning */ + SDL_RWseek(src, -1, RW_SEEK_CUR); + } else if(magic[1] == 0xD9) { + /* Got to end of good JPEG */ + break; + } else if( (in_scan == 1) && (magic[1] == 0x00) ) { + /* This is an encoded 0xFF within the data */ + } else if( (magic[1] >= 0xD0) && (magic[1] < 0xD9) ) { + /* These have nothing else */ + } else if(SDL_RWread(src, magic+2, 1, 2) != 2) { + is_JPG = 0; + } else { + /* Yes, it's big-endian */ + Sint64 innerStart; + Uint32 size; + Sint64 end; + innerStart = SDL_RWtell(src); + size = (magic[2] << 8) + magic[3]; + end = SDL_RWseek(src, size-2, RW_SEEK_CUR); + if ( end != innerStart + size - 2 ) is_JPG = 0; + if ( magic[1] == 0xDA ) { + /* Now comes the actual JPEG meat */ +#ifdef FAST_IS_JPEG + /* Ok, I'm convinced. It is a JPEG. */ + break; +#else + /* I'm not convinced. Prove it! */ + in_scan = 1; +#endif + } + } + } + } + } + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_JPG); +} + +#define INPUT_BUFFER_SIZE 4096 +typedef struct { + struct jpeg_source_mgr pub; + + SDL_RWops *ctx; + Uint8 buffer[INPUT_BUFFER_SIZE]; +} my_source_mgr; + +/* + * Initialize source --- called by jpeg_read_header + * before any data is actually read. + */ +static void init_source (j_decompress_ptr cinfo) +{ + /* We don't actually need to do anything */ + return; +} + +/* + * Fill the input buffer --- called whenever buffer is emptied. + */ +static boolean fill_input_buffer (j_decompress_ptr cinfo) +{ + my_source_mgr * src = (my_source_mgr *) cinfo->src; + int nbytes; + + nbytes = SDL_RWread(src->ctx, src->buffer, 1, INPUT_BUFFER_SIZE); + if (nbytes <= 0) { + /* Insert a fake EOI marker */ + src->buffer[0] = (Uint8) 0xFF; + src->buffer[1] = (Uint8) JPEG_EOI; + nbytes = 2; + } + src->pub.next_input_byte = src->buffer; + src->pub.bytes_in_buffer = nbytes; + + return TRUE; +} + + +/* + * Skip data --- used to skip over a potentially large amount of + * uninteresting data (such as an APPn marker). + * + * Writers of suspendable-input applications must note that skip_input_data + * is not granted the right to give a suspension return. If the skip extends + * beyond the data currently in the buffer, the buffer can be marked empty so + * that the next read will cause a fill_input_buffer call that can suspend. + * Arranging for additional bytes to be discarded before reloading the input + * buffer is the application writer's problem. + */ +static void skip_input_data (j_decompress_ptr cinfo, long num_bytes) +{ + my_source_mgr * src = (my_source_mgr *) cinfo->src; + + /* Just a dumb implementation for now. Could use fseek() except + * it doesn't work on pipes. Not clear that being smart is worth + * any trouble anyway --- large skips are infrequent. + */ + if (num_bytes > 0) { + while (num_bytes > (long) src->pub.bytes_in_buffer) { + num_bytes -= (long) src->pub.bytes_in_buffer; + (void) src->pub.fill_input_buffer(cinfo); + /* note we assume that fill_input_buffer will never + * return FALSE, so suspension need not be handled. + */ + } + src->pub.next_input_byte += (size_t) num_bytes; + src->pub.bytes_in_buffer -= (size_t) num_bytes; + } +} + +/* + * Terminate source --- called by jpeg_finish_decompress + * after all data has been read. + */ +static void term_source (j_decompress_ptr cinfo) +{ + /* We don't actually need to do anything */ + return; +} + +/* + * Prepare for input from a stdio stream. + * The caller must have already opened the stream, and is responsible + * for closing it after finishing decompression. + */ +static void jpeg_SDL_RW_src (j_decompress_ptr cinfo, SDL_RWops *ctx) +{ + my_source_mgr *src; + + /* The source object and input buffer are made permanent so that a series + * of JPEG images can be read from the same file by calling jpeg_stdio_src + * only before the first one. (If we discarded the buffer at the end of + * one image, we'd likely lose the start of the next one.) + * This makes it unsafe to use this manager and a different source + * manager serially with the same JPEG object. Caveat programmer. + */ + if (cinfo->src == NULL) { /* first time for this JPEG object? */ + cinfo->src = (struct jpeg_source_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + sizeof(my_source_mgr)); + src = (my_source_mgr *) cinfo->src; + } + + src = (my_source_mgr *) cinfo->src; + src->pub.init_source = init_source; + src->pub.fill_input_buffer = fill_input_buffer; + src->pub.skip_input_data = skip_input_data; + src->pub.resync_to_restart = lib.jpeg_resync_to_restart; /* use default method */ + src->pub.term_source = term_source; + src->ctx = ctx; + src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */ + src->pub.next_input_byte = NULL; /* until buffer loaded */ +} + +struct my_error_mgr { + struct jpeg_error_mgr errmgr; + jmp_buf escape; +}; + +static void my_error_exit(j_common_ptr cinfo) +{ + struct my_error_mgr *err = (struct my_error_mgr *)cinfo->err; + longjmp(err->escape, 1); +} + +static void output_no_message(j_common_ptr cinfo) +{ + /* do nothing */ +} + +/* Load a JPEG type image from an SDL datasource */ +SDL_Surface *IMG_LoadJPG_RW(SDL_RWops *src) +{ + Sint64 start; + struct jpeg_decompress_struct cinfo; + JSAMPROW rowptr[1]; + SDL_Surface *volatile surface = NULL; + struct my_error_mgr jerr; + + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + start = SDL_RWtell(src); + + if ( !IMG_Init(IMG_INIT_JPG) ) { + return NULL; + } + + /* Create a decompression structure and load the JPEG header */ + cinfo.err = lib.jpeg_std_error(&jerr.errmgr); + jerr.errmgr.error_exit = my_error_exit; + jerr.errmgr.output_message = output_no_message; + if(setjmp(jerr.escape)) { + /* If we get here, libjpeg found an error */ + lib.jpeg_destroy_decompress(&cinfo); + if ( surface != NULL ) { + SDL_FreeSurface(surface); + } + SDL_RWseek(src, start, RW_SEEK_SET); + IMG_SetError("JPEG loading error"); + return NULL; + } + + lib.jpeg_create_decompress(&cinfo); + jpeg_SDL_RW_src(&cinfo, src); + lib.jpeg_read_header(&cinfo, TRUE); + + if(cinfo.num_components == 4) { + /* Set 32-bit Raw output */ + cinfo.out_color_space = JCS_CMYK; + cinfo.quantize_colors = FALSE; + lib.jpeg_calc_output_dimensions(&cinfo); + + /* Allocate an output surface to hold the image */ + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, + cinfo.output_width, cinfo.output_height, 32, +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + 0x00FF0000, 0x0000FF00, 0x000000FF, 0xFF000000); +#else + 0x0000FF00, 0x00FF0000, 0xFF000000, 0x000000FF); +#endif + } else { + /* Set 24-bit RGB output */ + cinfo.out_color_space = JCS_RGB; + cinfo.quantize_colors = FALSE; +#ifdef FAST_JPEG + cinfo.scale_num = 1; + cinfo.scale_denom = 1; + cinfo.dct_method = JDCT_FASTEST; + cinfo.do_fancy_upsampling = FALSE; +#endif + lib.jpeg_calc_output_dimensions(&cinfo); + + /* Allocate an output surface to hold the image */ + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, + cinfo.output_width, cinfo.output_height, 24, +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + 0x0000FF, 0x00FF00, 0xFF0000, +#else + 0xFF0000, 0x00FF00, 0x0000FF, +#endif + 0); + } + + if ( surface == NULL ) { + lib.jpeg_destroy_decompress(&cinfo); + SDL_RWseek(src, start, RW_SEEK_SET); + IMG_SetError("Out of memory"); + return NULL; + } + + /* Decompress the image */ + lib.jpeg_start_decompress(&cinfo); + while ( cinfo.output_scanline < cinfo.output_height ) { + rowptr[0] = (JSAMPROW)(Uint8 *)surface->pixels + + cinfo.output_scanline * surface->pitch; + lib.jpeg_read_scanlines(&cinfo, rowptr, (JDIMENSION) 1); + } + lib.jpeg_finish_decompress(&cinfo); + lib.jpeg_destroy_decompress(&cinfo); + + return(surface); +} + +#else + +int IMG_InitJPG() +{ + IMG_SetError("JPEG images are not supported"); + return(-1); +} + +void IMG_QuitJPG() +{ +} + +/* See if an image is contained in a data source */ +int IMG_isJPG(SDL_RWops *src) +{ + return(0); +} + +/* Load a JPEG type image from an SDL datasource */ +SDL_Surface *IMG_LoadJPG_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_JPG */ + +#endif /* !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) */ diff --git a/src/SDL2/IMG_lbm.c b/src/SDL2/IMG_lbm.c new file mode 100644 index 000000000..7aeb3bff6 --- /dev/null +++ b/src/SDL2/IMG_lbm.c @@ -0,0 +1,499 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* This is a ILBM image file loading framework + Load IFF pictures, PBM & ILBM packing methods, with or without stencil + Written by Daniel Morais ( Daniel AT Morais DOT com ) in September 2001. + 24 bits ILBM files support added by Marc Le Douarain (http://www.multimania.com/mavati) + in December 2002. + EHB and HAM (specific Amiga graphic chip modes) support added by Marc Le Douarain + (http://www.multimania.com/mavati) in December 2003. + Stencil and colorkey fixes by David Raulo (david.raulo AT free DOT fr) in February 2004. + Buffer overflow fix in RLE decompression by David Raulo in January 2008. +*/ + +#include +#include +#include + +#include "SDL_endian.h" +#include "SDL_image.h" + +#ifdef LOAD_LBM + + +#define MAXCOLORS 256 + +/* Structure for an IFF picture ( BMHD = Bitmap Header ) */ + +typedef struct +{ + Uint16 w, h; /* width & height of the bitmap in pixels */ + Sint16 x, y; /* screen coordinates of the bitmap */ + Uint8 planes; /* number of planes of the bitmap */ + Uint8 mask; /* mask type ( 0 => no mask ) */ + Uint8 tcomp; /* compression type */ + Uint8 pad1; /* dummy value, for padding */ + Uint16 tcolor; /* transparent color */ + Uint8 xAspect, /* pixel aspect ratio */ + yAspect; + Sint16 Lpage; /* width of the screen in pixels */ + Sint16 Hpage; /* height of the screen in pixels */ +} BMHD; + +int IMG_isLBM( SDL_RWops *src ) +{ + Sint64 start; + int is_LBM; + Uint8 magic[4+4+4]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_LBM = 0; + if ( SDL_RWread( src, magic, sizeof(magic), 1 ) ) + { + if ( !SDL_memcmp( magic, "FORM", 4 ) && + ( !SDL_memcmp( magic + 8, "PBM ", 4 ) || + !SDL_memcmp( magic + 8, "ILBM", 4 ) ) ) + { + is_LBM = 1; + } + } + SDL_RWseek(src, start, RW_SEEK_SET); + return( is_LBM ); +} + +SDL_Surface *IMG_LoadLBM_RW( SDL_RWops *src ) +{ + Sint64 start; + SDL_Surface *Image; + Uint8 id[4], pbm, colormap[MAXCOLORS*3], *MiniBuf, *ptr, count, color, msk; + Uint32 size, bytesloaded, nbcolors; + Uint32 i, j, bytesperline, nbplanes, stencil, plane, h; + Uint32 remainingbytes; + Uint32 width; + BMHD bmhd; + char *error; + Uint8 flagHAM,flagEHB; + + Image = NULL; + error = NULL; + MiniBuf = NULL; + + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + start = SDL_RWtell(src); + + if ( !SDL_RWread( src, id, 4, 1 ) ) + { + error="error reading IFF chunk"; + goto done; + } + + /* Should be the size of the file minus 4+4 ( 'FORM'+size ) */ + if ( !SDL_RWread( src, &size, 4, 1 ) ) + { + error="error reading IFF chunk size"; + goto done; + } + + /* As size is not used here, no need to swap it */ + + if ( SDL_memcmp( id, "FORM", 4 ) != 0 ) + { + error="not a IFF file"; + goto done; + } + + if ( !SDL_RWread( src, id, 4, 1 ) ) + { + error="error reading IFF chunk"; + goto done; + } + + pbm = 0; + + /* File format : PBM=Packed Bitmap, ILBM=Interleaved Bitmap */ + if ( !SDL_memcmp( id, "PBM ", 4 ) ) pbm = 1; + else if ( SDL_memcmp( id, "ILBM", 4 ) ) + { + error="not a IFF picture"; + goto done; + } + + nbcolors = 0; + + SDL_memset( &bmhd, 0, sizeof( BMHD ) ); + flagHAM = 0; + flagEHB = 0; + + while ( SDL_memcmp( id, "BODY", 4 ) != 0 ) + { + if ( !SDL_RWread( src, id, 4, 1 ) ) + { + error="error reading IFF chunk"; + goto done; + } + + if ( !SDL_RWread( src, &size, 4, 1 ) ) + { + error="error reading IFF chunk size"; + goto done; + } + + bytesloaded = 0; + + size = SDL_SwapBE32( size ); + + if ( !SDL_memcmp( id, "BMHD", 4 ) ) /* Bitmap header */ + { + if ( !SDL_RWread( src, &bmhd, sizeof( BMHD ), 1 ) ) + { + error="error reading BMHD chunk"; + goto done; + } + + bytesloaded = sizeof( BMHD ); + + bmhd.w = SDL_SwapBE16( bmhd.w ); + bmhd.h = SDL_SwapBE16( bmhd.h ); + bmhd.x = SDL_SwapBE16( bmhd.x ); + bmhd.y = SDL_SwapBE16( bmhd.y ); + bmhd.tcolor = SDL_SwapBE16( bmhd.tcolor ); + bmhd.Lpage = SDL_SwapBE16( bmhd.Lpage ); + bmhd.Hpage = SDL_SwapBE16( bmhd.Hpage ); + } + + if ( !SDL_memcmp( id, "CMAP", 4 ) ) /* palette ( Color Map ) */ + { + if ( !SDL_RWread( src, &colormap, size, 1 ) ) + { + error="error reading CMAP chunk"; + goto done; + } + + bytesloaded = size; + nbcolors = size / 3; + } + + if ( !SDL_memcmp( id, "CAMG", 4 ) ) /* Amiga ViewMode */ + { + Uint32 viewmodes; + if ( !SDL_RWread( src, &viewmodes, sizeof(viewmodes), 1 ) ) + { + error="error reading CAMG chunk"; + goto done; + } + + bytesloaded = size; + viewmodes = SDL_SwapBE32( viewmodes ); + if ( viewmodes & 0x0800 ) + flagHAM = 1; + if ( viewmodes & 0x0080 ) + flagEHB = 1; + } + + if ( SDL_memcmp( id, "BODY", 4 ) ) + { + if ( size & 1 ) ++size; /* padding ! */ + size -= bytesloaded; + /* skip the remaining bytes of this chunk */ + if ( size ) SDL_RWseek( src, size, RW_SEEK_CUR ); + } + } + + /* compute some usefull values, based on the bitmap header */ + + width = ( bmhd.w + 15 ) & 0xFFFFFFF0; /* Width in pixels modulo 16 */ + + bytesperline = ( ( bmhd.w + 15 ) / 16 ) * 2; + + nbplanes = bmhd.planes; + + if ( pbm ) /* File format : 'Packed Bitmap' */ + { + bytesperline *= 8; + nbplanes = 1; + } + + stencil = (bmhd.mask & 1); /* There is a mask ( 'stencil' ) */ + + /* Allocate memory for a temporary buffer ( used for + decompression/deinterleaving ) */ + + MiniBuf = (Uint8 *)SDL_malloc( bytesperline * (nbplanes + stencil) ); + if ( MiniBuf == NULL ) + { + error="no enough memory for temporary buffer"; + goto done; + } + + if ( ( Image = SDL_CreateRGBSurface( SDL_SWSURFACE, width, bmhd.h, (bmhd.planes==24 || flagHAM==1)?24:8, 0, 0, 0, 0 ) ) == NULL ) + goto done; + + if ( bmhd.mask & 2 ) /* There is a transparent color */ + SDL_SetColorKey( Image, SDL_TRUE, bmhd.tcolor ); + + /* Update palette informations */ + + /* There is no palette in 24 bits ILBM file */ + if ( nbcolors>0 && flagHAM==0 ) + { + /* FIXME: Should this include the stencil? See comment below */ + int nbrcolorsfinal = 1 << (nbplanes + stencil); + ptr = &colormap[0]; + + for ( i=0; iformat->palette->colors[i].r = *ptr++; + Image->format->palette->colors[i].g = *ptr++; + Image->format->palette->colors[i].b = *ptr++; + } + + /* Amiga EHB mode (Extra-Half-Bright) */ + /* 6 bitplanes mode with a 32 colors palette */ + /* The 32 last colors are the same but divided by 2 */ + /* Some Amiga pictures save 64 colors with 32 last wrong colors, */ + /* they shouldn't !, and here we overwrite these 32 bad colors. */ + if ( (nbcolors==32 || flagEHB ) && (1<format->palette->colors[i].r = (*ptr++)/2; + Image->format->palette->colors[i].g = (*ptr++)/2; + Image->format->palette->colors[i].b = (*ptr++)/2; + } + } + + /* If nbcolors < 2^nbplanes, repeat the colormap */ + /* This happens when pictures have a stencil mask */ + if ( nbrcolorsfinal > (1<format->palette->colors[i].r = Image->format->palette->colors[i%nbcolors].r; + Image->format->palette->colors[i].g = Image->format->palette->colors[i%nbcolors].g; + Image->format->palette->colors[i].b = Image->format->palette->colors[i%nbcolors].b; + } + if ( !pbm ) + Image->format->palette->ncolors = nbrcolorsfinal; + } + + /* Get the bitmap */ + + for ( h=0; h < bmhd.h; h++ ) + { + /* uncompress the datas of each planes */ + + for ( plane=0; plane < (nbplanes+stencil); plane++ ) + { + ptr = MiniBuf + ( plane * bytesperline ); + + remainingbytes = bytesperline; + + if ( bmhd.tcomp == 1 ) /* Datas are compressed */ + { + do + { + if ( !SDL_RWread( src, &count, 1, 1 ) ) + { + error="error reading BODY chunk"; + goto done; + } + + if ( count & 0x80 ) + { + count ^= 0xFF; + count += 2; /* now it */ + + if ( ( count > remainingbytes ) || !SDL_RWread( src, &color, 1, 1 ) ) + { + error="error reading BODY chunk"; + goto done; + } + SDL_memset( ptr, color, count ); + } + else + { + ++count; + + if ( ( count > remainingbytes ) || !SDL_RWread( src, ptr, count, 1 ) ) + { + error="error reading BODY chunk"; + goto done; + } + } + + ptr += count; + remainingbytes -= count; + + } while ( remainingbytes > 0 ); + } + else + { + if ( !SDL_RWread( src, ptr, bytesperline, 1 ) ) + { + error="error reading BODY chunk"; + goto done; + } + } + } + + /* One line has been read, store it ! */ + + ptr = (Uint8 *)Image->pixels; + if ( nbplanes==24 || flagHAM==1 ) + ptr += h * width * 3; + else + ptr += h * width; + + if ( pbm ) /* File format : 'Packed Bitmap' */ + { + SDL_memcpy( ptr, MiniBuf, width ); + } + else /* We have to un-interlace the bits ! */ + { + if ( nbplanes!=24 && flagHAM==0 ) + { + size = ( width + 7 ) / 8; + + for ( i=0; i < size; i++ ) + { + memset( ptr, 0, 8 ); + + for ( plane=0; plane < (nbplanes + stencil); plane++ ) + { + color = *( MiniBuf + i + ( plane * bytesperline ) ); + msk = 0x80; + + for ( j=0; j<8; j++ ) + { + if ( ( plane + j ) <= 7 ) ptr[j] |= (Uint8)( color & msk ) >> ( 7 - plane - j ); + else ptr[j] |= (Uint8)( color & msk ) << ( plane + j - 7 ); + + msk >>= 1; + } + } + ptr += 8; + } + } + else + { + Uint32 finalcolor = 0; + size = ( width + 7 ) / 8; + /* 24 bitplanes ILBM : R0...R7,G0...G7,B0...B7 */ + /* or HAM (6 bitplanes) or HAM8 (8 bitplanes) modes */ + for ( i=0; i>(nbplanes-2) ) + { + case 0: /* take direct color from palette */ + finalcolor = colormap[ pixelcolor*3 ] + (colormap[ pixelcolor*3+1 ]<<8) + (colormap[ pixelcolor*3+2 ]<<16); + break; + case 1: /* modify only blue component */ + finalcolor = finalcolor&0x00FFFF; + finalcolor = finalcolor | (pixelcolor<<(16+(10-nbplanes))); + break; + case 2: /* modify only red component */ + finalcolor = finalcolor&0xFFFF00; + finalcolor = finalcolor | pixelcolor<<(10-nbplanes); + break; + case 3: /* modify only green component */ + finalcolor = finalcolor&0xFF00FF; + finalcolor = finalcolor | (pixelcolor<<(8+(10-nbplanes))); + break; + } + } + else + { + finalcolor = pixelcolor; + } +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + *ptr++ = (Uint8)(finalcolor>>16); + *ptr++ = (Uint8)(finalcolor>>8); + *ptr++ = (Uint8)(finalcolor); +#else + *ptr++ = (Uint8)(finalcolor); + *ptr++ = (Uint8)(finalcolor>>8); + *ptr++ = (Uint8)(finalcolor>>16); +#endif + maskBit = maskBit>>1; + } + } + } + } + } + +done: + + if ( MiniBuf ) SDL_free( MiniBuf ); + + if ( error ) + { + SDL_RWseek(src, start, RW_SEEK_SET); + if ( Image ) { + SDL_FreeSurface( Image ); + Image = NULL; + } + IMG_SetError( error ); + } + + return( Image ); +} + +#else /* LOAD_LBM */ + +/* See if an image is contained in a data source */ +int IMG_isLBM(SDL_RWops *src) +{ + return(0); +} + +/* Load an IFF type image from an SDL datasource */ +SDL_Surface *IMG_LoadLBM_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_LBM */ diff --git a/src/SDL2/IMG_pcx.c b/src/SDL2/IMG_pcx.c new file mode 100644 index 000000000..37c594772 --- /dev/null +++ b/src/SDL2/IMG_pcx.c @@ -0,0 +1,276 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* + * PCX file reader: + * Supports: + * 1..4 bits/pixel in multiplanar format (1 bit/plane/pixel) + * 8 bits/pixel in single-planar format (8 bits/plane/pixel) + * 24 bits/pixel in 3-plane format (8 bits/plane/pixel) + * + * (The <8bpp formats are expanded to 8bpp surfaces) + * + * Doesn't support: + * single-planar packed-pixel formats other than 8bpp + * 4-plane 32bpp format with a fourth "intensity" plane + */ +#include +#include + +#include "SDL_endian.h" + +#include "SDL_image.h" + +#ifdef LOAD_PCX + +struct PCXheader { + Uint8 Manufacturer; + Uint8 Version; + Uint8 Encoding; + Uint8 BitsPerPixel; + Sint16 Xmin, Ymin, Xmax, Ymax; + Sint16 HDpi, VDpi; + Uint8 Colormap[48]; + Uint8 Reserved; + Uint8 NPlanes; + Sint16 BytesPerLine; + Sint16 PaletteInfo; + Sint16 HscreenSize; + Sint16 VscreenSize; + Uint8 Filler[54]; +}; + +/* See if an image is contained in a data source */ +int IMG_isPCX(SDL_RWops *src) +{ + Sint64 start; + int is_PCX; + const int ZSoft_Manufacturer = 10; + const int PC_Paintbrush_Version = 5; + const int PCX_Uncompressed_Encoding = 0; + const int PCX_RunLength_Encoding = 1; + struct PCXheader pcxh; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_PCX = 0; + if ( SDL_RWread(src, &pcxh, sizeof(pcxh), 1) == 1 ) { + if ( (pcxh.Manufacturer == ZSoft_Manufacturer) && + (pcxh.Version == PC_Paintbrush_Version) && + (pcxh.Encoding == PCX_RunLength_Encoding || + pcxh.Encoding == PCX_Uncompressed_Encoding) ) { + is_PCX = 1; + } + } + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_PCX); +} + +/* Load a PCX type image from an SDL datasource */ +SDL_Surface *IMG_LoadPCX_RW(SDL_RWops *src) +{ + Sint64 start; + struct PCXheader pcxh; + Uint32 Rmask; + Uint32 Gmask; + Uint32 Bmask; + Uint32 Amask; + SDL_Surface *surface = NULL; + int width, height; + int y, bpl; + Uint8 *row, *buf = NULL; + char *error = NULL; + int bits, src_bits; + + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + start = SDL_RWtell(src); + + if ( ! SDL_RWread(src, &pcxh, sizeof(pcxh), 1) ) { + error = "file truncated"; + goto done; + } + pcxh.Xmin = SDL_SwapLE16(pcxh.Xmin); + pcxh.Ymin = SDL_SwapLE16(pcxh.Ymin); + pcxh.Xmax = SDL_SwapLE16(pcxh.Xmax); + pcxh.Ymax = SDL_SwapLE16(pcxh.Ymax); + pcxh.BytesPerLine = SDL_SwapLE16(pcxh.BytesPerLine); + + /* Create the surface of the appropriate type */ + width = (pcxh.Xmax - pcxh.Xmin) + 1; + height = (pcxh.Ymax - pcxh.Ymin) + 1; + Rmask = Gmask = Bmask = Amask = 0; + src_bits = pcxh.BitsPerPixel * pcxh.NPlanes; + if((pcxh.BitsPerPixel == 1 && pcxh.NPlanes >= 1 && pcxh.NPlanes <= 4) + || (pcxh.BitsPerPixel == 8 && pcxh.NPlanes == 1)) { + bits = 8; + } else if(pcxh.BitsPerPixel == 8 && pcxh.NPlanes == 3) { + bits = 24; +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + Rmask = 0x000000FF; + Gmask = 0x0000FF00; + Bmask = 0x00FF0000; +#else + Rmask = 0xFF0000; + Gmask = 0x00FF00; + Bmask = 0x0000FF; +#endif + } else { + error = "unsupported PCX format"; + goto done; + } + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, width, height, + bits, Rmask, Gmask, Bmask, Amask); + if ( surface == NULL ) + goto done; + + bpl = pcxh.NPlanes * pcxh.BytesPerLine; + if (bpl > surface->pitch) { + error = "bytes per line is too large (corrupt?)"; + } + buf = (Uint8 *)SDL_malloc(bpl); + row = (Uint8 *)surface->pixels; + for ( y=0; yh; ++y ) { + /* decode a scan line to a temporary buffer first */ + int i, count = 0; + Uint8 ch; + Uint8 *dst = (src_bits == 8) ? row : buf; + if ( pcxh.Encoding == 0 ) { + if(!SDL_RWread(src, dst, bpl, 1)) { + error = "file truncated"; + goto done; + } + } else { + for(i = 0; i < bpl; i++) { + if(!count) { + if(!SDL_RWread(src, &ch, 1, 1)) { + error = "file truncated"; + goto done; + } + if( (ch & 0xc0) == 0xc0) { + count = ch & 0x3f; + if(!SDL_RWread(src, &ch, 1, 1)) { + error = "file truncated"; + goto done; + } + } else + count = 1; + } + dst[i] = ch; + count--; + } + } + + if(src_bits <= 4) { + /* expand planes to 1 byte/pixel */ + Uint8 *innerSrc = buf; + int plane; + for(plane = 0; plane < pcxh.NPlanes; plane++) { + int j, k, x = 0; + for(j = 0; j < pcxh.BytesPerLine; j++) { + Uint8 byte = *innerSrc++; + for(k = 7; k >= 0; k--) { + unsigned bit = (byte >> k) & 1; + /* skip padding bits */ + if (j * 8 + k >= width) + continue; + row[x++] |= bit << plane; + } + } + } + } else if(src_bits == 24) { + /* de-interlace planes */ + Uint8 *innerSrc = buf; + int plane; + for(plane = 0; plane < pcxh.NPlanes; plane++) { + int x; + dst = row + plane; + for(x = 0; x < width; x++) { + *dst = *innerSrc++; + dst += pcxh.NPlanes; + } + } + } + + row += surface->pitch; + } + + if(bits == 8) { + SDL_Color *colors = surface->format->palette->colors; + int nc = 1 << src_bits; + int i; + + surface->format->palette->ncolors = nc; + if(src_bits == 8) { + Uint8 ch; + /* look for a 256-colour palette */ + do { + if ( !SDL_RWread(src, &ch, 1, 1)) { + error = "file truncated"; + goto done; + } + } while ( ch != 12 ); + + for(i = 0; i < 256; i++) { + SDL_RWread(src, &colors[i].r, 1, 1); + SDL_RWread(src, &colors[i].g, 1, 1); + SDL_RWread(src, &colors[i].b, 1, 1); + } + } else { + for(i = 0; i < nc; i++) { + colors[i].r = pcxh.Colormap[i * 3]; + colors[i].g = pcxh.Colormap[i * 3 + 1]; + colors[i].b = pcxh.Colormap[i * 3 + 2]; + } + } + } + +done: + SDL_free(buf); + if ( error ) { + SDL_RWseek(src, start, RW_SEEK_SET); + if ( surface ) { + SDL_FreeSurface(surface); + surface = NULL; + } + IMG_SetError(error); + } + return(surface); +} + +#else + +/* See if an image is contained in a data source */ +int IMG_isPCX(SDL_RWops *src) +{ + return(0); +} + +/* Load a PCX type image from an SDL datasource */ +SDL_Surface *IMG_LoadPCX_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_PCX */ diff --git a/src/SDL2/IMG_png.c b/src/SDL2/IMG_png.c new file mode 100644 index 000000000..e5b186d76 --- /dev/null +++ b/src/SDL2/IMG_png.c @@ -0,0 +1,646 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* This is a PNG image file loading framework */ + +#include "SDL_image.h" + +#if !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) + +#ifdef LOAD_PNG + +/*============================================================================= + File: SDL_png.c + Purpose: A PNG loader and saver for the SDL library + Revision: + Created by: Philippe Lavoie (2 November 1998) + lavoie@zeus.genie.uottawa.ca + Modified by: + + Copyright notice: + Copyright (C) 1998 Philippe Lavoie + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with this library; if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Comments: The load and save routine are basically the ones you can find + in the example.c file from the libpng distribution. + + Changes: + 5/17/99 - Modified to use the new SDL data sources - Sam Lantinga + +=============================================================================*/ + +#include "SDL_endian.h" + +#ifdef macintosh +#define MACOS +#endif +#include + +/* Check for the older version of libpng */ +#if (PNG_LIBPNG_VER_MAJOR == 1) +#if (PNG_LIBPNG_VER_MINOR < 4) +#define LIBPNG_VERSION_12 +typedef png_bytep png_const_bytep; +#endif +#if (PNG_LIBPNG_VER_MINOR < 6) +typedef png_structp png_const_structrp; +typedef png_infop png_const_inforp; +#endif +#endif + +static struct { + int loaded; + void *handle; + png_infop (*png_create_info_struct) (png_const_structrp png_ptr); + png_structp (*png_create_read_struct) (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, png_error_ptr warn_fn); + void (*png_destroy_read_struct) (png_structpp png_ptr_ptr, png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr); + png_uint_32 (*png_get_IHDR) (png_const_structrp png_ptr, png_const_inforp info_ptr, png_uint_32 *width, png_uint_32 *height, int *bit_depth, int *color_type, int *interlace_method, int *compression_method, int *filter_method); + png_voidp (*png_get_io_ptr) (png_const_structrp png_ptr); + png_byte (*png_get_channels) (png_const_structrp png_ptr, png_const_inforp info_ptr); + png_uint_32 (*png_get_PLTE) (png_const_structrp png_ptr, png_infop info_ptr, png_colorp *palette, int *num_palette); + png_uint_32 (*png_get_tRNS) (png_const_structrp png_ptr, png_infop info_ptr, png_bytep *trans, int *num_trans, png_color_16p *trans_values); + png_uint_32 (*png_get_valid) (png_const_structrp png_ptr, png_const_inforp info_ptr, png_uint_32 flag); + void (*png_read_image) (png_structp png_ptr, png_bytepp image); + void (*png_read_info) (png_structp png_ptr, png_infop info_ptr); + void (*png_read_update_info) (png_structp png_ptr, png_infop info_ptr); + void (*png_set_expand) (png_structp png_ptr); + void (*png_set_gray_to_rgb) (png_structp png_ptr); + void (*png_set_packing) (png_structp png_ptr); + void (*png_set_read_fn) (png_structp png_ptr, png_voidp io_ptr, png_rw_ptr read_data_fn); + void (*png_set_strip_16) (png_structp png_ptr); + int (*png_sig_cmp) (png_const_bytep sig, png_size_t start, png_size_t num_to_check); +#ifndef LIBPNG_VERSION_12 + jmp_buf* (*png_set_longjmp_fn) (png_structp, png_longjmp_ptr, size_t); +#endif +} lib; + +#ifdef LOAD_PNG_DYNAMIC +int IMG_InitPNG() +{ + if ( lib.loaded == 0 ) { + lib.handle = SDL_LoadObject(LOAD_PNG_DYNAMIC); + if ( lib.handle == NULL ) { + return -1; + } + lib.png_create_info_struct = + (png_infop (*) (png_const_structrp)) + SDL_LoadFunction(lib.handle, "png_create_info_struct"); + if ( lib.png_create_info_struct == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_create_read_struct = + (png_structp (*) (png_const_charp, png_voidp, png_error_ptr, png_error_ptr)) + SDL_LoadFunction(lib.handle, "png_create_read_struct"); + if ( lib.png_create_read_struct == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_destroy_read_struct = + (void (*) (png_structpp, png_infopp, png_infopp)) + SDL_LoadFunction(lib.handle, "png_destroy_read_struct"); + if ( lib.png_destroy_read_struct == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_get_IHDR = + (png_uint_32 (*) (png_const_structrp, png_const_inforp, png_uint_32 *, png_uint_32 *, int *, int *, int *, int *, int *)) + SDL_LoadFunction(lib.handle, "png_get_IHDR"); + if ( lib.png_get_IHDR == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_get_channels = + (png_byte (*) (png_const_structrp, png_const_inforp)) + SDL_LoadFunction(lib.handle, "png_get_channels"); + if ( lib.png_get_channels == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_get_io_ptr = + (png_voidp (*) (png_const_structrp)) + SDL_LoadFunction(lib.handle, "png_get_io_ptr"); + if ( lib.png_get_io_ptr == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_get_PLTE = + (png_uint_32 (*) (png_const_structrp, png_infop, png_colorp *, int *)) + SDL_LoadFunction(lib.handle, "png_get_PLTE"); + if ( lib.png_get_PLTE == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_get_tRNS = + (png_uint_32 (*) (png_const_structrp, png_infop, png_bytep *, int *, png_color_16p *)) + SDL_LoadFunction(lib.handle, "png_get_tRNS"); + if ( lib.png_get_tRNS == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_get_valid = + (png_uint_32 (*) (png_const_structrp, png_const_inforp, png_uint_32)) + SDL_LoadFunction(lib.handle, "png_get_valid"); + if ( lib.png_get_valid == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_read_image = + (void (*) (png_structp, png_bytepp)) + SDL_LoadFunction(lib.handle, "png_read_image"); + if ( lib.png_read_image == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_read_info = + (void (*) (png_structp, png_infop)) + SDL_LoadFunction(lib.handle, "png_read_info"); + if ( lib.png_read_info == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_read_update_info = + (void (*) (png_structp, png_infop)) + SDL_LoadFunction(lib.handle, "png_read_update_info"); + if ( lib.png_read_update_info == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_set_expand = + (void (*) (png_structp)) + SDL_LoadFunction(lib.handle, "png_set_expand"); + if ( lib.png_set_expand == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_set_gray_to_rgb = + (void (*) (png_structp)) + SDL_LoadFunction(lib.handle, "png_set_gray_to_rgb"); + if ( lib.png_set_gray_to_rgb == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_set_packing = + (void (*) (png_structp)) + SDL_LoadFunction(lib.handle, "png_set_packing"); + if ( lib.png_set_packing == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_set_read_fn = + (void (*) (png_structp, png_voidp, png_rw_ptr)) + SDL_LoadFunction(lib.handle, "png_set_read_fn"); + if ( lib.png_set_read_fn == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_set_strip_16 = + (void (*) (png_structp)) + SDL_LoadFunction(lib.handle, "png_set_strip_16"); + if ( lib.png_set_strip_16 == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.png_sig_cmp = + (int (*) (png_const_bytep, png_size_t, png_size_t)) + SDL_LoadFunction(lib.handle, "png_sig_cmp"); + if ( lib.png_sig_cmp == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } +#ifndef LIBPNG_VERSION_12 + lib.png_set_longjmp_fn = + (jmp_buf * (*) (png_structp, png_longjmp_ptr, size_t)) + SDL_LoadFunction(lib.handle, "png_set_longjmp_fn"); + if ( lib.png_set_longjmp_fn == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } +#endif + } + ++lib.loaded; + + return 0; +} +void IMG_QuitPNG() +{ + if ( lib.loaded == 0 ) { + return; + } + if ( lib.loaded == 1 ) { + SDL_UnloadObject(lib.handle); + } + --lib.loaded; +} +#else +int IMG_InitPNG() +{ + if ( lib.loaded == 0 ) { + lib.png_create_info_struct = png_create_info_struct; + lib.png_create_read_struct = png_create_read_struct; + lib.png_destroy_read_struct = png_destroy_read_struct; + lib.png_get_IHDR = png_get_IHDR; + lib.png_get_channels = png_get_channels; + lib.png_get_io_ptr = png_get_io_ptr; + lib.png_get_PLTE = png_get_PLTE; + lib.png_get_tRNS = png_get_tRNS; + lib.png_get_valid = png_get_valid; + lib.png_read_image = png_read_image; + lib.png_read_info = png_read_info; + lib.png_read_update_info = png_read_update_info; + lib.png_set_expand = png_set_expand; + lib.png_set_gray_to_rgb = png_set_gray_to_rgb; + lib.png_set_packing = png_set_packing; + lib.png_set_read_fn = png_set_read_fn; + lib.png_set_strip_16 = png_set_strip_16; + lib.png_sig_cmp = png_sig_cmp; +#ifndef LIBPNG_VERSION_12 + lib.png_set_longjmp_fn = png_set_longjmp_fn; +#endif + } + ++lib.loaded; + + return 0; +} +void IMG_QuitPNG() +{ + if ( lib.loaded == 0 ) { + return; + } + if ( lib.loaded == 1 ) { + } + --lib.loaded; +} +#endif /* LOAD_PNG_DYNAMIC */ + +/* See if an image is contained in a data source */ +int IMG_isPNG(SDL_RWops *src) +{ + Sint64 start; + int is_PNG; + Uint8 magic[4]; + + if ( !src ) { + return 0; + } + + start = SDL_RWtell(src); + is_PNG = 0; + if ( SDL_RWread(src, magic, 1, sizeof(magic)) == sizeof(magic) ) { + if ( magic[0] == 0x89 && + magic[1] == 'P' && + magic[2] == 'N' && + magic[3] == 'G' ) { + is_PNG = 1; + } + } + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_PNG); +} + +/* Load a PNG type image from an SDL datasource */ +static void png_read_data(png_structp ctx, png_bytep area, png_size_t size) +{ + SDL_RWops *src; + + src = (SDL_RWops *)lib.png_get_io_ptr(ctx); + SDL_RWread(src, area, size, 1); +} +SDL_Surface *IMG_LoadPNG_RW(SDL_RWops *src) +{ + Sint64 start; + const char *error; + SDL_Surface *volatile surface; + png_structp png_ptr; + png_infop info_ptr; + png_uint_32 width, height; + int bit_depth, color_type, interlace_type, num_channels; + Uint32 Rmask; + Uint32 Gmask; + Uint32 Bmask; + Uint32 Amask; + SDL_Palette *palette; + png_bytep *volatile row_pointers; + int row, i; + int ckey = -1; + png_color_16 *transv; + + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + start = SDL_RWtell(src); + + if ( !IMG_Init(IMG_INIT_PNG) ) { + return NULL; + } + + /* Initialize the data we will clean up when we're done */ + error = NULL; + png_ptr = NULL; info_ptr = NULL; row_pointers = NULL; surface = NULL; + + /* Create the PNG loading context structure */ + png_ptr = lib.png_create_read_struct(PNG_LIBPNG_VER_STRING, + NULL,NULL,NULL); + if (png_ptr == NULL){ + error = "Couldn't allocate memory for PNG file or incompatible PNG dll"; + goto done; + } + + /* Allocate/initialize the memory for image information. REQUIRED. */ + info_ptr = lib.png_create_info_struct(png_ptr); + if (info_ptr == NULL) { + error = "Couldn't create image information for PNG file"; + goto done; + } + + /* Set error handling if you are using setjmp/longjmp method (this is + * the normal method of doing things with libpng). REQUIRED unless you + * set up your own error handlers in png_create_read_struct() earlier. + */ +#ifndef LIBPNG_VERSION_12 + if ( setjmp(*lib.png_set_longjmp_fn(png_ptr, longjmp, sizeof (jmp_buf))) ) +#else + if ( setjmp(png_ptr->jmpbuf) ) +#endif + { + error = "Error reading the PNG file."; + goto done; + } + + /* Set up the input control */ + lib.png_set_read_fn(png_ptr, src, png_read_data); + + /* Read PNG header info */ + lib.png_read_info(png_ptr, info_ptr); + lib.png_get_IHDR(png_ptr, info_ptr, &width, &height, &bit_depth, + &color_type, &interlace_type, NULL, NULL); + + /* tell libpng to strip 16 bit/color files down to 8 bits/color */ + lib.png_set_strip_16(png_ptr) ; + + /* Extract multiple pixels with bit depths of 1, 2, and 4 from a single + * byte into separate bytes (useful for paletted and grayscale images). + */ + lib.png_set_packing(png_ptr); + + /* scale greyscale values to the range 0..255 */ + if (color_type == PNG_COLOR_TYPE_GRAY) + lib.png_set_expand(png_ptr); + + /* For images with a single "transparent colour", set colour key; + if more than one index has transparency, or if partially transparent + entries exist, use full alpha channel */ + if (lib.png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS)) { + int num_trans; + Uint8 *trans; + lib.png_get_tRNS(png_ptr, info_ptr, &trans, &num_trans, &transv); + if (color_type == PNG_COLOR_TYPE_PALETTE) { + /* Check if all tRNS entries are opaque except one */ + int j, t = -1; + for (j = 0; j < num_trans; j++) { + if (trans[j] == 0) { + if (t >= 0) { + break; + } + t = j; + } else if (trans[j] != 255) { + break; + } + } + if (j == num_trans) { + /* exactly one transparent index */ + ckey = t; + } else { + /* more than one transparent index, or translucency */ + lib.png_set_expand(png_ptr); + } + } else { + ckey = 0; /* actual value will be set later */ + } + } + + if ( color_type == PNG_COLOR_TYPE_GRAY_ALPHA ) + lib.png_set_gray_to_rgb(png_ptr); + + lib.png_read_update_info(png_ptr, info_ptr); + + lib.png_get_IHDR(png_ptr, info_ptr, &width, &height, &bit_depth, + &color_type, &interlace_type, NULL, NULL); + + /* Allocate the SDL surface to hold the image */ + Rmask = Gmask = Bmask = Amask = 0 ; + num_channels = lib.png_get_channels(png_ptr, info_ptr); + if ( num_channels >= 3 ) { +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + Rmask = 0x000000FF; + Gmask = 0x0000FF00; + Bmask = 0x00FF0000; + Amask = (num_channels == 4) ? 0xFF000000 : 0; +#else + int s = (num_channels == 4) ? 0 : 8; + Rmask = 0xFF000000 >> s; + Gmask = 0x00FF0000 >> s; + Bmask = 0x0000FF00 >> s; + Amask = 0x000000FF >> s; +#endif + } + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, width, height, + bit_depth*num_channels, Rmask,Gmask,Bmask,Amask); + if ( surface == NULL ) { + error = SDL_GetError(); + goto done; + } + + if (ckey != -1) { + if (color_type != PNG_COLOR_TYPE_PALETTE) { + /* FIXME: Should these be truncated or shifted down? */ + ckey = SDL_MapRGB(surface->format, + (Uint8)transv->red, + (Uint8)transv->green, + (Uint8)transv->blue); + } + SDL_SetColorKey(surface, SDL_TRUE, ckey); + } + + /* Create the array of pointers to image data */ + row_pointers = (png_bytep*) SDL_malloc(sizeof(png_bytep)*height); + if ( (row_pointers == NULL) ) { + error = "Out of memory"; + goto done; + } + for (row = 0; row < (int)height; row++) { + row_pointers[row] = (png_bytep) + (Uint8 *)surface->pixels + row*surface->pitch; + } + + /* Read the entire image in one go */ + lib.png_read_image(png_ptr, row_pointers); + + /* and we're done! (png_read_end() can be omitted if no processing of + * post-IDAT text/time/etc. is desired) + * In some cases it can't read PNG's created by some popular programs (ACDSEE), + * we do not want to process comments, so we omit png_read_end + + lib.png_read_end(png_ptr, info_ptr); + */ + + /* Load the palette, if any */ + palette = surface->format->palette; + if ( palette ) { + int png_num_palette; + png_colorp png_palette; + lib.png_get_PLTE(png_ptr, info_ptr, &png_palette, &png_num_palette); + if (color_type == PNG_COLOR_TYPE_GRAY) { + palette->ncolors = 256; + for (i = 0; i < 256; i++) { + palette->colors[i].r = i; + palette->colors[i].g = i; + palette->colors[i].b = i; + } + } else if (png_num_palette > 0 ) { + palette->ncolors = png_num_palette; + for ( i=0; icolors[i].b = png_palette[i].blue; + palette->colors[i].g = png_palette[i].green; + palette->colors[i].r = png_palette[i].red; + } + } + } + +done: /* Clean up and return */ + if ( png_ptr ) { + lib.png_destroy_read_struct(&png_ptr, + info_ptr ? &info_ptr : (png_infopp)0, + (png_infopp)0); + } + if ( row_pointers ) { + SDL_free(row_pointers); + } + if ( error ) { + SDL_RWseek(src, start, RW_SEEK_SET); + if ( surface ) { + SDL_FreeSurface(surface); + surface = NULL; + } + IMG_SetError(error); + } + return(surface); +} + +#else + +int IMG_InitPNG() +{ + IMG_SetError("PNG images are not supported"); + return(-1); +} + +void IMG_QuitPNG() +{ +} + +/* See if an image is contained in a data source */ +int IMG_isPNG(SDL_RWops *src) +{ + return(0); +} + +/* Load a PNG type image from an SDL datasource */ +SDL_Surface *IMG_LoadPNG_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_PNG */ + +#endif /* !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) */ + +/* We'll always have PNG save support */ +#define SAVE_PNG + +#ifdef SAVE_PNG + +#include "miniz.h" + +int IMG_SavePNG(SDL_Surface *surface, const char *file) +{ + SDL_RWops *dst = SDL_RWFromFile(file, "wb"); + if (dst) { + return IMG_SavePNG_RW(surface, dst, 1); + } else { + return -1; + } +} + +int IMG_SavePNG_RW(SDL_Surface *surface, SDL_RWops *dst, int freedst) +{ + int result = -1; + + if (dst) { +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + static const Uint32 png_format = SDL_PIXELFORMAT_ABGR8888; +#else + static const Uint32 png_format = SDL_PIXELFORMAT_RGBA8888; +#endif + size_t size; + void *png; + + if (surface->format->format == png_format) { + png = tdefl_write_image_to_png_file_in_memory(surface->pixels, surface->w, surface->h, surface->pitch, surface->format->BytesPerPixel, &size); + } else { + SDL_Surface *cvt = SDL_ConvertSurfaceFormat(surface, png_format, 0); + if (cvt) { + png = tdefl_write_image_to_png_file_in_memory(cvt->pixels, cvt->w, cvt->h, cvt->pitch, cvt->format->BytesPerPixel, &size); + SDL_FreeSurface(cvt); + } + } + if (png) { + if (SDL_RWwrite(dst, png, size, 1)) { + result = 0; + } + SDL_free(png); + } else { + SDL_SetError("Failed to convert and save image"); + } + if (freedst) { + SDL_RWclose(dst); + } + } else { + SDL_SetError("Passed NULL dst"); + } + return result; +} + +#endif /* SAVE_PNG */ diff --git a/src/SDL2/IMG_pnm.c b/src/SDL2/IMG_pnm.c new file mode 100644 index 000000000..478caf63b --- /dev/null +++ b/src/SDL2/IMG_pnm.c @@ -0,0 +1,258 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* + * PNM (portable anymap) image loader: + * + * Supports: PBM, PGM and PPM, ASCII and binary formats + * (PBM and PGM are loaded as 8bpp surfaces) + * Does not support: maximum component value > 255 + */ + +#include +#include +#include +#include + +#include "SDL_image.h" + +#ifdef LOAD_PNM + +/* See if an image is contained in a data source */ +int IMG_isPNM(SDL_RWops *src) +{ + Sint64 start; + int is_PNM; + char magic[2]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_PNM = 0; + if ( SDL_RWread(src, magic, sizeof(magic), 1) ) { + /* + * PNM magic signatures: + * P1 PBM, ascii format + * P2 PGM, ascii format + * P3 PPM, ascii format + * P4 PBM, binary format + * P5 PGM, binary format + * P6 PPM, binary format + * P7 PAM, a general wrapper for PNM data + */ + if ( magic[0] == 'P' && magic[1] >= '1' && magic[1] <= '6' ) { + is_PNM = 1; + } + } + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_PNM); +} + +/* read a non-negative integer from the source. return -1 upon error */ +static int ReadNumber(SDL_RWops *src) +{ + int number; + unsigned char ch; + + /* Initialize return value */ + number = 0; + + /* Skip leading whitespace */ + do { + if ( ! SDL_RWread(src, &ch, 1, 1) ) { + return(0); + } + /* Eat comments as whitespace */ + if ( ch == '#' ) { /* Comment is '#' to end of line */ + do { + if ( ! SDL_RWread(src, &ch, 1, 1) ) { + return -1; + } + } while ( (ch != '\r') && (ch != '\n') ); + } + } while ( isspace(ch) ); + + /* Add up the number */ + do { + number *= 10; + number += ch-'0'; + + if ( !SDL_RWread(src, &ch, 1, 1) ) { + return -1; + } + } while ( isdigit(ch) ); + + return(number); +} + +SDL_Surface *IMG_LoadPNM_RW(SDL_RWops *src) +{ + Sint64 start; + SDL_Surface *surface = NULL; + int width, height; + int maxval, y, bpl; + Uint8 *row; + Uint8 *buf = NULL; + char *error = NULL; + Uint8 magic[2]; + int ascii; + enum { PBM, PGM, PPM, PAM } kind; + +#define ERROR(s) do { error = (s); goto done; } while(0) + + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + start = SDL_RWtell(src); + + SDL_RWread(src, magic, 2, 1); + kind = magic[1] - '1'; + ascii = 1; + if(kind >= 3) { + ascii = 0; + kind -= 3; + } + + width = ReadNumber(src); + height = ReadNumber(src); + if(width <= 0 || height <= 0) + ERROR("Unable to read image width and height"); + + if(kind != PBM) { + maxval = ReadNumber(src); + if(maxval <= 0 || maxval > 255) + ERROR("unsupported PNM format"); + } else + maxval = 255; /* never scale PBMs */ + + /* binary PNM allows just a single character of whitespace after + the last parameter, and we've already consumed it */ + + if(kind == PPM) { + /* 24-bit surface in R,G,B byte order */ + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, width, height, 24, +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + 0x000000ff, 0x0000ff00, 0x00ff0000, +#else + 0x00ff0000, 0x0000ff00, 0x000000ff, +#endif + 0); + } else { + /* load PBM/PGM as 8-bit indexed images */ + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, width, height, 8, + 0, 0, 0, 0); + } + if ( surface == NULL ) + ERROR("Out of memory"); + bpl = width * surface->format->BytesPerPixel; + if(kind == PGM) { + SDL_Color *c = surface->format->palette->colors; + int i; + for(i = 0; i < 256; i++) + c[i].r = c[i].g = c[i].b = i; + surface->format->palette->ncolors = 256; + } else if(kind == PBM) { + /* for some reason PBM has 1=black, 0=white */ + SDL_Color *c = surface->format->palette->colors; + c[0].r = c[0].g = c[0].b = 255; + c[1].r = c[1].g = c[1].b = 0; + surface->format->palette->ncolors = 2; + bpl = (width + 7) >> 3; + buf = (Uint8 *)SDL_malloc(bpl); + if(buf == NULL) + ERROR("Out of memory"); + } + + /* Read the image into the surface */ + row = (Uint8 *)surface->pixels; + for(y = 0; y < height; y++) { + if(ascii) { + int i; + if(kind == PBM) { + for(i = 0; i < width; i++) { + Uint8 ch; + do { + if(!SDL_RWread(src, &ch, + 1, 1)) + ERROR("file truncated"); + ch -= '0'; + } while(ch > 1); + row[i] = ch; + } + } else { + for(i = 0; i < bpl; i++) { + int c; + c = ReadNumber(src); + if(c < 0) + ERROR("file truncated"); + row[i] = c; + } + } + } else { + Uint8 *dst = (kind == PBM) ? buf : row; + if(!SDL_RWread(src, dst, bpl, 1)) + ERROR("file truncated"); + if(kind == PBM) { + /* expand bitmap to 8bpp */ + int i; + for(i = 0; i < width; i++) { + int bit = 7 - (i & 7); + row[i] = (buf[i >> 3] >> bit) & 1; + } + } + } + if(maxval < 255) { + /* scale up to full dynamic range (slow) */ + int i; + for(i = 0; i < bpl; i++) + row[i] = row[i] * 255 / maxval; + } + row += surface->pitch; + } +done: + SDL_free(buf); + if(error) { + SDL_RWseek(src, start, RW_SEEK_SET); + if ( surface ) { + SDL_FreeSurface(surface); + surface = NULL; + } + IMG_SetError(error); + } + return(surface); +} + +#else + +/* See if an image is contained in a data source */ +int IMG_isPNM(SDL_RWops *src) +{ + return(0); +} + +/* Load a PNM type image from an SDL datasource */ +SDL_Surface *IMG_LoadPNM_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_PNM */ diff --git a/src/SDL2/IMG_tga.c b/src/SDL2/IMG_tga.c new file mode 100644 index 000000000..cbeae8a3d --- /dev/null +++ b/src/SDL2/IMG_tga.c @@ -0,0 +1,340 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#if !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) + +/* This is a Targa image file loading framework */ + +#include +#include +#include + +#include "SDL_endian.h" + +#include "SDL_image.h" + +#ifdef LOAD_TGA + +/* + * A TGA loader for the SDL library + * Supports: Reading 8, 15, 16, 24 and 32bpp images, with alpha or colourkey, + * uncompressed or RLE encoded. + * + * 2000-06-10 Mattias Engdegård : initial version + * 2000-06-26 Mattias Engdegård : read greyscale TGAs + * 2000-08-09 Mattias Engdegård : alpha inversion removed + */ + +struct TGAheader { + Uint8 infolen; /* length of info field */ + Uint8 has_cmap; /* 1 if image has colormap, 0 otherwise */ + Uint8 type; + + Uint8 cmap_start[2]; /* index of first colormap entry */ + Uint8 cmap_len[2]; /* number of entries in colormap */ + Uint8 cmap_bits; /* bits per colormap entry */ + + Uint8 yorigin[2]; /* image origin (ignored here) */ + Uint8 xorigin[2]; + Uint8 width[2]; /* image size */ + Uint8 height[2]; + Uint8 pixel_bits; /* bits/pixel */ + Uint8 flags; +}; + +enum tga_type { + TGA_TYPE_INDEXED = 1, + TGA_TYPE_RGB = 2, + TGA_TYPE_BW = 3, + TGA_TYPE_RLE_INDEXED = 9, + TGA_TYPE_RLE_RGB = 10, + TGA_TYPE_RLE_BW = 11 +}; + +#define TGA_INTERLEAVE_MASK 0xc0 +#define TGA_INTERLEAVE_NONE 0x00 +#define TGA_INTERLEAVE_2WAY 0x40 +#define TGA_INTERLEAVE_4WAY 0x80 + +#define TGA_ORIGIN_MASK 0x30 +#define TGA_ORIGIN_LEFT 0x00 +#define TGA_ORIGIN_RIGHT 0x10 +#define TGA_ORIGIN_LOWER 0x00 +#define TGA_ORIGIN_UPPER 0x20 + +/* read/write unaligned little-endian 16-bit ints */ +#define LE16(p) ((p)[0] + ((p)[1] << 8)) +#define SETLE16(p, v) ((p)[0] = (v), (p)[1] = (v) >> 8) + +/* Load a TGA type image from an SDL datasource */ +SDL_Surface *IMG_LoadTGA_RW(SDL_RWops *src) +{ + Sint64 start; + const char *error = NULL; + struct TGAheader hdr; + int rle = 0; + int alpha = 0; + int indexed = 0; + int grey = 0; + int ckey = -1; + int ncols, w, h; + SDL_Surface *img = NULL; + Uint32 rmask, gmask, bmask, amask; + Uint8 *dst; + int i; + int bpp; + int lstep; + Uint32 pixel; + int count, rep; + + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + start = SDL_RWtell(src); + + if(!SDL_RWread(src, &hdr, sizeof(hdr), 1)) { + error = "Error reading TGA data"; + goto error; + } + ncols = LE16(hdr.cmap_len); + switch(hdr.type) { + case TGA_TYPE_RLE_INDEXED: + rle = 1; + /* fallthrough */ + case TGA_TYPE_INDEXED: + if(!hdr.has_cmap || hdr.pixel_bits != 8 || ncols > 256) + goto unsupported; + indexed = 1; + break; + + case TGA_TYPE_RLE_RGB: + rle = 1; + /* fallthrough */ + case TGA_TYPE_RGB: + indexed = 0; + break; + + case TGA_TYPE_RLE_BW: + rle = 1; + /* fallthrough */ + case TGA_TYPE_BW: + if(hdr.pixel_bits != 8) + goto unsupported; + /* Treat greyscale as 8bpp indexed images */ + indexed = grey = 1; + break; + + default: + goto unsupported; + } + + bpp = (hdr.pixel_bits + 7) >> 3; + rmask = gmask = bmask = amask = 0; + switch(hdr.pixel_bits) { + case 8: + if(!indexed) { + goto unsupported; + } + break; + + case 15: + case 16: + /* 15 and 16bpp both seem to use 5 bits/plane. The extra alpha bit + is ignored for now. */ + rmask = 0x7c00; + gmask = 0x03e0; + bmask = 0x001f; + break; + + case 32: + alpha = 1; + /* fallthrough */ + case 24: +#if SDL_BYTEORDER == SDL_BIG_ENDIAN + { + int s = alpha ? 0 : 8; + amask = 0x000000ff >> s; + rmask = 0x0000ff00 >> s; + gmask = 0x00ff0000 >> s; + bmask = 0xff000000 >> s; + } +#else + amask = alpha ? 0xff000000 : 0; + rmask = 0x00ff0000; + gmask = 0x0000ff00; + bmask = 0x000000ff; +#endif + break; + + default: + goto unsupported; + } + + if((hdr.flags & TGA_INTERLEAVE_MASK) != TGA_INTERLEAVE_NONE + || hdr.flags & TGA_ORIGIN_RIGHT) { + goto unsupported; + } + + SDL_RWseek(src, hdr.infolen, RW_SEEK_CUR); /* skip info field */ + + w = LE16(hdr.width); + h = LE16(hdr.height); + img = SDL_CreateRGBSurface(SDL_SWSURFACE, w, h, + bpp * 8, + rmask, gmask, bmask, amask); + if(img == NULL) { + error = "Out of memory"; + goto error; + } + + if(hdr.has_cmap) { + int palsiz = ncols * ((hdr.cmap_bits + 7) >> 3); + if(indexed && !grey) { + Uint8 *pal = (Uint8 *)SDL_malloc(palsiz), *p = pal; + SDL_Color *colors = img->format->palette->colors; + img->format->palette->ncolors = ncols; + SDL_RWread(src, pal, palsiz, 1); + for(i = 0; i < ncols; i++) { + switch(hdr.cmap_bits) { + case 15: + case 16: + { + Uint16 c = p[0] + (p[1] << 8); + p += 2; + colors[i].r = (c >> 7) & 0xf8; + colors[i].g = (c >> 2) & 0xf8; + colors[i].b = c << 3; + } + break; + case 24: + case 32: + colors[i].b = *p++; + colors[i].g = *p++; + colors[i].r = *p++; + if(hdr.cmap_bits == 32 && *p++ < 128) + ckey = i; + break; + } + } + SDL_free(pal); + if(ckey >= 0) + SDL_SetColorKey(img, SDL_TRUE, ckey); + } else { + /* skip unneeded colormap */ + SDL_RWseek(src, palsiz, RW_SEEK_CUR); + } + } + + if(grey) { + SDL_Color *colors = img->format->palette->colors; + for(i = 0; i < 256; i++) + colors[i].r = colors[i].g = colors[i].b = i; + img->format->palette->ncolors = 256; + } + + if(hdr.flags & TGA_ORIGIN_UPPER) { + lstep = img->pitch; + dst = (Uint8 *)img->pixels; + } else { + lstep = -img->pitch; + dst = (Uint8 *)img->pixels + (h - 1) * img->pitch; + } + + /* The RLE decoding code is slightly convoluted since we can't rely on + spans not to wrap across scan lines */ + count = rep = 0; + for(i = 0; i < h; i++) { + if(rle) { + int x = 0; + for(;;) { + Uint8 c; + + if(count) { + int n = count; + if(n > w - x) + n = w - x; + SDL_RWread(src, dst + x * bpp, n * bpp, 1); + count -= n; + x += n; + if(x == w) + break; + } else if(rep) { + int n = rep; + if(n > w - x) + n = w - x; + rep -= n; + while(n--) { + SDL_memcpy(dst + x * bpp, &pixel, bpp); + x++; + } + if(x == w) + break; + } + + SDL_RWread(src, &c, 1, 1); + if(c & 0x80) { + SDL_RWread(src, &pixel, bpp, 1); + rep = (c & 0x7f) + 1; + } else { + count = c + 1; + } + } + + } else { + SDL_RWread(src, dst, w * bpp, 1); + } +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + if (bpp == 2) { + /* swap byte order */ + int x; + Uint16 *p = (Uint16 *)dst; + for(x = 0; x < w; x++) + p[x] = SDL_Swap16(p[x]); + } +#endif + dst += lstep; + } + return img; + +unsupported: + error = "Unsupported TGA format"; + +error: + SDL_RWseek(src, start, RW_SEEK_SET); + if ( img ) { + SDL_FreeSurface(img); + } + IMG_SetError(error); + return NULL; +} + +#else + +/* dummy TGA load routine */ +SDL_Surface *IMG_LoadTGA_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_TGA */ + +#endif /* !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) */ diff --git a/src/SDL2/IMG_tif.c b/src/SDL2/IMG_tif.c new file mode 100644 index 000000000..651c454f3 --- /dev/null +++ b/src/SDL2/IMG_tif.c @@ -0,0 +1,298 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#if !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) + +/* This is a TIFF image file loading framework */ + +#include + +#include "SDL_image.h" + +#ifdef LOAD_TIF + +#include + +static struct { + int loaded; + void *handle; + TIFF* (*TIFFClientOpen)(const char*, const char*, thandle_t, TIFFReadWriteProc, TIFFReadWriteProc, TIFFSeekProc, TIFFCloseProc, TIFFSizeProc, TIFFMapFileProc, TIFFUnmapFileProc); + void (*TIFFClose)(TIFF*); + int (*TIFFGetField)(TIFF*, ttag_t, ...); + int (*TIFFReadRGBAImage)(TIFF*, uint32, uint32, uint32*, int); + TIFFErrorHandler (*TIFFSetErrorHandler)(TIFFErrorHandler); +} lib; + +#ifdef LOAD_TIF_DYNAMIC +int IMG_InitTIF() +{ + if ( lib.loaded == 0 ) { + lib.handle = SDL_LoadObject(LOAD_TIF_DYNAMIC); + if ( lib.handle == NULL ) { + return -1; + } + lib.TIFFClientOpen = + (TIFF* (*)(const char*, const char*, thandle_t, TIFFReadWriteProc, TIFFReadWriteProc, TIFFSeekProc, TIFFCloseProc, TIFFSizeProc, TIFFMapFileProc, TIFFUnmapFileProc)) + SDL_LoadFunction(lib.handle, "TIFFClientOpen"); + if ( lib.TIFFClientOpen == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.TIFFClose = + (void (*)(TIFF*)) + SDL_LoadFunction(lib.handle, "TIFFClose"); + if ( lib.TIFFClose == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.TIFFGetField = + (int (*)(TIFF*, ttag_t, ...)) + SDL_LoadFunction(lib.handle, "TIFFGetField"); + if ( lib.TIFFGetField == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.TIFFReadRGBAImage = + (int (*)(TIFF*, uint32, uint32, uint32*, int)) + SDL_LoadFunction(lib.handle, "TIFFReadRGBAImage"); + if ( lib.TIFFReadRGBAImage == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + lib.TIFFSetErrorHandler = + (TIFFErrorHandler (*)(TIFFErrorHandler)) + SDL_LoadFunction(lib.handle, "TIFFSetErrorHandler"); + if ( lib.TIFFSetErrorHandler == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + } + ++lib.loaded; + + return 0; +} +void IMG_QuitTIF() +{ + if ( lib.loaded == 0 ) { + return; + } + if ( lib.loaded == 1 ) { + SDL_UnloadObject(lib.handle); + } + --lib.loaded; +} +#else +int IMG_InitTIF() +{ + if ( lib.loaded == 0 ) { + lib.TIFFClientOpen = TIFFClientOpen; + lib.TIFFClose = TIFFClose; + lib.TIFFGetField = TIFFGetField; + lib.TIFFReadRGBAImage = TIFFReadRGBAImage; + lib.TIFFSetErrorHandler = TIFFSetErrorHandler; + } + ++lib.loaded; + + return 0; +} +void IMG_QuitTIF() +{ + if ( lib.loaded == 0 ) { + return; + } + if ( lib.loaded == 1 ) { + } + --lib.loaded; +} +#endif /* LOAD_TIF_DYNAMIC */ + +/* + * These are the thunking routine to use the SDL_RWops* routines from + * libtiff's internals. +*/ + +static tsize_t tiff_read(thandle_t fd, tdata_t buf, tsize_t size) +{ + return SDL_RWread((SDL_RWops*)fd, buf, 1, size); +} + +static toff_t tiff_seek(thandle_t fd, toff_t offset, int origin) +{ + return SDL_RWseek((SDL_RWops*)fd, offset, origin); +} + +static tsize_t tiff_write(thandle_t fd, tdata_t buf, tsize_t size) +{ + return SDL_RWwrite((SDL_RWops*)fd, buf, 1, size); +} + +static int tiff_close(thandle_t fd) +{ + /* + * We don't want libtiff closing our SDL_RWops*, but if it's not given + * a routine to try, and if the image isn't a TIFF, it'll segfault. + */ + return 0; +} + +static int tiff_map(thandle_t fd, tdata_t* pbase, toff_t* psize) +{ + return (0); +} + +static void tiff_unmap(thandle_t fd, tdata_t base, toff_t size) +{ + return; +} + +static toff_t tiff_size(thandle_t fd) +{ + Sint64 save_pos; + toff_t size; + + save_pos = SDL_RWtell((SDL_RWops*)fd); + SDL_RWseek((SDL_RWops*)fd, 0, RW_SEEK_END); + size = SDL_RWtell((SDL_RWops*)fd); + SDL_RWseek((SDL_RWops*)fd, save_pos, RW_SEEK_SET); + return size; +} + +int IMG_isTIF(SDL_RWops* src) +{ + Sint64 start; + int is_TIF; + Uint8 magic[4]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_TIF = 0; + if ( SDL_RWread(src, magic, 1, sizeof(magic)) == sizeof(magic) ) { + if ( (magic[0] == 'I' && + magic[1] == 'I' && + magic[2] == 0x2a && + magic[3] == 0x00) || + (magic[0] == 'M' && + magic[1] == 'M' && + magic[2] == 0x00 && + magic[3] == 0x2a) ) { + is_TIF = 1; + } + } + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_TIF); +} + +SDL_Surface* IMG_LoadTIF_RW(SDL_RWops* src) +{ + Sint64 start; + TIFF* tiff; + SDL_Surface* surface = NULL; + Uint32 img_width, img_height; + Uint32 Rmask, Gmask, Bmask, Amask; + Uint32 x, y; + Uint32 half; + + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + start = SDL_RWtell(src); + + if ( !IMG_Init(IMG_INIT_TIF) ) { + return NULL; + } + + /* turn off memory mapped access with the m flag */ + tiff = lib.TIFFClientOpen("SDL_image", "rm", (thandle_t)src, + tiff_read, tiff_write, tiff_seek, tiff_close, tiff_size, tiff_map, tiff_unmap); + if(!tiff) + goto error; + + /* Retrieve the dimensions of the image from the TIFF tags */ + lib.TIFFGetField(tiff, TIFFTAG_IMAGEWIDTH, &img_width); + lib.TIFFGetField(tiff, TIFFTAG_IMAGELENGTH, &img_height); + + Rmask = 0x000000FF; + Gmask = 0x0000FF00; + Bmask = 0x00FF0000; + Amask = 0xFF000000; + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, img_width, img_height, 32, + Rmask, Gmask, Bmask, Amask); + if(!surface) + goto error; + + if(!lib.TIFFReadRGBAImage(tiff, img_width, img_height, (uint32 *)surface->pixels, 0)) + goto error; + + /* libtiff loads the image upside-down, flip it back */ + half = img_height / 2; + for(y = 0; y < half; y++) + { + Uint32 *top = (Uint32 *)surface->pixels + y * surface->pitch/4; + Uint32 *bot = (Uint32 *)surface->pixels + + (img_height - y - 1) * surface->pitch/4; + for(x = 0; x < img_width; x++) + { + Uint32 tmp = top[x]; + top[x] = bot[x]; + bot[x] = tmp; + } + } + lib.TIFFClose(tiff); + + return surface; + +error: + SDL_RWseek(src, start, RW_SEEK_SET); + if ( surface ) { + SDL_FreeSurface(surface); + } + return NULL; +} + +#else + +int IMG_InitTIF() +{ + IMG_SetError("TIFF images are not supported"); + return(-1); +} + +void IMG_QuitTIF() +{ +} + +/* See if an image is contained in a data source */ +int IMG_isTIF(SDL_RWops *src) +{ + return(0); +} + +/* Load a TIFF type image from an SDL datasource */ +SDL_Surface *IMG_LoadTIF_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_TIF */ + +#endif /* !defined(__APPLE__) || defined(SDL_IMAGE_USE_COMMON_BACKEND) */ diff --git a/src/SDL2/IMG_webp.c b/src/SDL2/IMG_webp.c new file mode 100644 index 000000000..70c5e3b46 --- /dev/null +++ b/src/SDL2/IMG_webp.c @@ -0,0 +1,317 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* This is a WEBP image file loading framework */ + +#include +#include + +#include "SDL_image.h" + +#ifdef LOAD_WEBP + +/*============================================================================= + File: SDL_webp.c + Purpose: A WEBP loader for the SDL library + Revision: + Created by: Michael Bonfils (Murlock) (26 November 2011) + murlock42@gmail.com + +=============================================================================*/ + +#include "SDL_endian.h" + +#ifdef macintosh +#define MACOS +#endif +#include + +static struct { + int loaded; + void *handle; + VP8StatusCode (*webp_get_features_internal) (const uint8_t *data, size_t data_size, WebPBitstreamFeatures* features, int decoder_abi_version); + uint8_t* (*webp_decode_rgb_into) (const uint8_t* data, size_t data_size, uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + uint8_t* (*webp_decode_rgba_into) (const uint8_t* data, size_t data_size, uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +} lib; + +#ifdef LOAD_WEBP_DYNAMIC +int IMG_InitWEBP() +{ + if ( lib.loaded == 0 ) { + lib.handle = SDL_LoadObject(LOAD_WEBP_DYNAMIC); + if ( lib.handle == NULL ) { + return -1; + } + + lib.webp_get_features_internal = + ( VP8StatusCode (*) (const uint8_t *, size_t, WebPBitstreamFeatures*, int) ) + SDL_LoadFunction(lib.handle, "WebPGetFeaturesInternal" ); + if ( lib.webp_get_features_internal == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + + lib.webp_decode_rgb_into = + ( uint8_t* (*) (const uint8_t*, size_t, uint8_t*, size_t, int ) ) + SDL_LoadFunction(lib.handle, "WebPDecodeRGBInto" ); + if ( lib.webp_decode_rgb_into == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + + lib.webp_decode_rgba_into = + ( uint8_t* (*) (const uint8_t*, size_t, uint8_t*, size_t, int ) ) + SDL_LoadFunction(lib.handle, "WebPDecodeRGBAInto" ); + if ( lib.webp_decode_rgba_into == NULL ) { + SDL_UnloadObject(lib.handle); + return -1; + } + } + ++lib.loaded; + + return 0; +} +void IMG_QuitWEBP() +{ + if ( lib.loaded == 0 ) { + return; + } + if ( lib.loaded == 1 ) { + SDL_UnloadObject(lib.handle); + } + --lib.loaded; +} +#else +int IMG_InitWEBP() +{ + if ( lib.loaded == 0 ) { +#ifdef __MACOSX__ + extern VP8StatusCode WebPGetFeaturesInternal(const uint8_t*, size_t, WebPBitstreamFeatures*, int) __attribute__((weak_import)); + if ( WebPGetFeaturesInternal == NULL ) + { + /* Missing weakly linked framework */ + IMG_SetError("Missing webp.framework"); + return -1; + } +#endif // __MACOSX__ + + lib.webp_get_features_internal = WebPGetFeaturesInternal; + lib.webp_decode_rgb_into = WebPDecodeRGBInto; + lib.webp_decode_rgba_into = WebPDecodeRGBAInto; + } + ++lib.loaded; + + return 0; +} +void IMG_QuitWEBP() +{ + if ( lib.loaded == 0 ) { + return; + } + if ( lib.loaded == 1 ) { + } + --lib.loaded; +} +#endif /* LOAD_WEBP_DYNAMIC */ + +static int webp_getinfo( SDL_RWops *src, int *datasize ) { + Sint64 start; + int is_WEBP; + Uint8 magic[20]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_WEBP = 0; + if ( SDL_RWread(src, magic, 1, sizeof(magic)) == sizeof(magic) ) { + if ( magic[ 0] == 'R' && + magic[ 1] == 'I' && + magic[ 2] == 'F' && + magic[ 3] == 'F' && + magic[ 8] == 'W' && + magic[ 9] == 'E' && + magic[10] == 'B' && + magic[11] == 'P' && + magic[12] == 'V' && + magic[13] == 'P' && + magic[14] == '8' && +#if WEBP_DECODER_ABI_VERSION < 0x0003 /* old versions don't support WEBPVP8X and WEBPVP8L */ + magic[15] == ' ') { +#else + (magic[15] == ' ' || magic[15] == 'X' || magic[15] == 'L')) { +#endif + is_WEBP = 1; + if ( datasize ) { + *datasize = (int)SDL_RWseek(src, 0, SEEK_END); + } + } + } + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_WEBP); +} + +/* See if an image is contained in a data source */ +int IMG_isWEBP(SDL_RWops *src) +{ + return webp_getinfo( src, NULL ); +} + +SDL_Surface *IMG_LoadWEBP_RW(SDL_RWops *src) +{ + Sint64 start; + const char *error = NULL; + SDL_Surface *volatile surface = NULL; + Uint32 Rmask; + Uint32 Gmask; + Uint32 Bmask; + Uint32 Amask; + WebPBitstreamFeatures features; + int raw_data_size; + uint8_t *raw_data = NULL; + int r; + uint8_t *ret; + + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + + start = SDL_RWtell(src); + + if ( !IMG_Init(IMG_INIT_WEBP) ) { + goto error; + } + + raw_data_size = -1; + if ( !webp_getinfo( src, &raw_data_size ) ) { + error = "Invalid WEBP"; + goto error; + } + + // seek to start of file + SDL_RWseek(src, 0, RW_SEEK_SET ); + + raw_data = (uint8_t*) SDL_malloc( raw_data_size ); + if ( raw_data == NULL ) { + error = "Failed to allocate enought buffer for WEBP"; + goto error; + } + + r = SDL_RWread(src, raw_data, 1, raw_data_size ); + if ( r != raw_data_size ) { + error = "Failed to read WEBP"; + goto error; + } + +#if 0 + // extract size of picture, not interesting since we don't know about alpha channel + int width = -1, height = -1; + if ( !WebPGetInfo( raw_data, raw_data_size, &width, &height ) ) { + printf("WebPGetInfo has failed\n" ); + return NULL; + } +#endif + + if ( lib.webp_get_features_internal( raw_data, raw_data_size, &features, WEBP_DECODER_ABI_VERSION ) != VP8_STATUS_OK ) { + error = "WebPGetFeatures has failed"; + goto error; + } + + /* Check if it's ok !*/ +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + Rmask = 0x000000FF; + Gmask = 0x0000FF00; + Bmask = 0x00FF0000; + Amask = (features.has_alpha) ? 0xFF000000 : 0; +#else + s = (features.has_alpha) ? 0 : 8; + Rmask = 0xFF000000 >> s; + Gmask = 0x00FF0000 >> s; + Bmask = 0x0000FF00 >> s; + Amask = 0x000000FF >> s; +#endif + + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, + features.width, features.height, + features.has_alpha?32:24, Rmask,Gmask,Bmask,Amask); + + if ( surface == NULL ) { + error = "Failed to allocate SDL_Surface"; + goto error; + } + + if ( features.has_alpha ) { + ret = lib.webp_decode_rgba_into( raw_data, raw_data_size, (uint8_t *)surface->pixels, surface->pitch * surface->h, surface->pitch ); + } else { + ret = lib.webp_decode_rgb_into( raw_data, raw_data_size, (uint8_t *)surface->pixels, surface->pitch * surface->h, surface->pitch ); + } + + if ( !ret ) { + error = "Failed to decode WEBP"; + goto error; + } + + return surface; + + +error: + + if ( surface ) { + SDL_FreeSurface( surface ); + } + + if ( raw_data ) { + SDL_free( raw_data ); + } + + if ( error ) { + IMG_SetError( error ); + } + + SDL_RWseek(src, start, RW_SEEK_SET); + return(NULL); +} + +#else + +int IMG_InitWEBP() +{ + IMG_SetError("WEBP images are not supported"); + return(-1); +} + +void IMG_QuitWEBP() +{ +} + +/* See if an image is contained in a data source */ +int IMG_isWEBP(SDL_RWops *src) +{ + return(0); +} + +/* Load a WEBP type image from an SDL datasource */ +SDL_Surface *IMG_LoadWEBP_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_WEBP */ diff --git a/src/SDL2/IMG_xcf.c b/src/SDL2/IMG_xcf.c new file mode 100644 index 000000000..5445d91da --- /dev/null +++ b/src/SDL2/IMG_xcf.c @@ -0,0 +1,841 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* This is a XCF image file loading framework */ + +#include +#include +#include +#include + +#include "SDL_endian.h" +#include "SDL_image.h" + +#ifdef LOAD_XCF + +#if DEBUG +static char prop_names [][30] = { + "end", + "colormap", + "active_layer", + "active_channel", + "selection", + "floating_selection", + "opacity", + "mode", + "visible", + "linked", + "preserve_transparency", + "apply_mask", + "edit_mask", + "show_mask", + "show_masked", + "offsets", + "color", + "compression", + "guides", + "resolution", + "tattoo", + "parasites", + "unit", + "paths", + "user_unit" +}; +#endif + + +typedef enum +{ + PROP_END = 0, + PROP_COLORMAP = 1, + PROP_ACTIVE_LAYER = 2, + PROP_ACTIVE_CHANNEL = 3, + PROP_SELECTION = 4, + PROP_FLOATING_SELECTION = 5, + PROP_OPACITY = 6, + PROP_MODE = 7, + PROP_VISIBLE = 8, + PROP_LINKED = 9, + PROP_PRESERVE_TRANSPARENCY = 10, + PROP_APPLY_MASK = 11, + PROP_EDIT_MASK = 12, + PROP_SHOW_MASK = 13, + PROP_SHOW_MASKED = 14, + PROP_OFFSETS = 15, + PROP_COLOR = 16, + PROP_COMPRESSION = 17, + PROP_GUIDES = 18, + PROP_RESOLUTION = 19, + PROP_TATTOO = 20, + PROP_PARASITES = 21, + PROP_UNIT = 22, + PROP_PATHS = 23, + PROP_USER_UNIT = 24 +} xcf_prop_type; + +typedef enum { + COMPR_NONE = 0, + COMPR_RLE = 1, + COMPR_ZLIB = 2, + COMPR_FRACTAL = 3 +} xcf_compr_type; + +typedef enum { + IMAGE_RGB = 0, + IMAGE_GREYSCALE = 1, + IMAGE_INDEXED = 2 +} xcf_image_type; + +typedef struct { + Uint32 id; + Uint32 length; + union { + struct { + Uint32 num; + char * cmap; + } colormap; // 1 + struct { + Uint32 drawable_offset; + } floating_selection; // 5 + Sint32 opacity; + Sint32 mode; + int visible; + int linked; + int preserve_transparency; + int apply_mask; + int show_mask; + struct { + Sint32 x; + Sint32 y; + } offset; + unsigned char color [3]; + Uint8 compression; + struct { + Sint32 x; + Sint32 y; + } resolution; + struct { + char * name; + Uint32 flags; + Uint32 size; + char * data; + } parasite; + } data; +} xcf_prop; + +typedef struct { + char sign [14]; + Uint32 width; + Uint32 height; + Sint32 image_type; + xcf_prop * properties; + + Uint32 * layer_file_offsets; + Uint32 * channel_file_offsets; + + xcf_compr_type compr; + Uint32 cm_num; + unsigned char * cm_map; +} xcf_header; + +typedef struct { + Uint32 width; + Uint32 height; + Sint32 layer_type; + char * name; + xcf_prop * properties; + + Uint32 hierarchy_file_offset; + Uint32 layer_mask_offset; + + Uint32 offset_x; + Uint32 offset_y; + int visible; +} xcf_layer; + +typedef struct { + Uint32 width; + Uint32 height; + char * name; + xcf_prop * properties; + + Uint32 hierarchy_file_offset; + + Uint32 color; + Uint32 opacity; + int selection; + int visible; +} xcf_channel; + +typedef struct { + Uint32 width; + Uint32 height; + Uint32 bpp; + + Uint32 * level_file_offsets; +} xcf_hierarchy; + +typedef struct { + Uint32 width; + Uint32 height; + + Uint32 * tile_file_offsets; +} xcf_level; + +typedef unsigned char * xcf_tile; + +typedef unsigned char * (* load_tile_type) (SDL_RWops *, Uint32, int, int, int); + + +/* See if an image is contained in a data source */ +int IMG_isXCF(SDL_RWops *src) +{ + Sint64 start; + int is_XCF; + char magic[14]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_XCF = 0; + if ( SDL_RWread(src, magic, sizeof(magic), 1) ) { + if (SDL_strncmp(magic, "gimp xcf ", 9) == 0) { + is_XCF = 1; + } + } + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_XCF); +} + +static char * read_string (SDL_RWops * src) { + Uint32 tmp; + char * data; + + tmp = SDL_ReadBE32 (src); + if (tmp > 0) { + data = (char *) SDL_malloc (sizeof (char) * tmp); + SDL_RWread (src, data, tmp, 1); + } + else { + data = NULL; + } + + return data; +} + + +static Uint32 Swap32 (Uint32 v) { + return + ((v & 0x000000FF) << 16) + | ((v & 0x0000FF00)) + | ((v & 0x00FF0000) >> 16) + | ((v & 0xFF000000)); +} + +static void xcf_read_property (SDL_RWops * src, xcf_prop * prop) { + prop->id = SDL_ReadBE32 (src); + prop->length = SDL_ReadBE32 (src); + +#if DEBUG + printf ("%.8X: %s: %d\n", SDL_RWtell (src), prop->id < 25 ? prop_names [prop->id] : "unknown", prop->length); +#endif + + switch (prop->id) { + case PROP_COLORMAP: + prop->data.colormap.num = SDL_ReadBE32 (src); + prop->data.colormap.cmap = (char *) SDL_malloc (sizeof (char) * prop->data.colormap.num * 3); + SDL_RWread (src, prop->data.colormap.cmap, prop->data.colormap.num*3, 1); + break; + + case PROP_OFFSETS: + prop->data.offset.x = SDL_ReadBE32 (src); + prop->data.offset.y = SDL_ReadBE32 (src); + break; + case PROP_OPACITY: + prop->data.opacity = SDL_ReadBE32 (src); + break; + case PROP_COMPRESSION: + case PROP_COLOR: + SDL_RWread (src, &prop->data, prop->length, 1); + break; + case PROP_VISIBLE: + prop->data.visible = SDL_ReadBE32 (src); + break; + default: + // SDL_RWread (src, &prop->data, prop->length, 1); + SDL_RWseek (src, prop->length, RW_SEEK_CUR); + } +} + +static void free_xcf_header (xcf_header * h) { + if (h->cm_num) + SDL_free (h->cm_map); + if (h->layer_file_offsets) + SDL_free (h->layer_file_offsets); + SDL_free (h); +} + +static xcf_header * read_xcf_header (SDL_RWops * src) { + xcf_header * h; + xcf_prop prop; + + h = (xcf_header *) SDL_malloc (sizeof (xcf_header)); + SDL_RWread (src, h->sign, 14, 1); + h->width = SDL_ReadBE32 (src); + h->height = SDL_ReadBE32 (src); + h->image_type = SDL_ReadBE32 (src); + + h->properties = NULL; + h->layer_file_offsets = NULL; + h->compr = COMPR_NONE; + h->cm_num = 0; + h->cm_map = NULL; + + // Just read, don't save + do { + xcf_read_property (src, &prop); + if (prop.id == PROP_COMPRESSION) + h->compr = (xcf_compr_type)prop.data.compression; + else if (prop.id == PROP_COLORMAP) { + // unused var: int i; + + h->cm_num = prop.data.colormap.num; + h->cm_map = (unsigned char *) SDL_malloc (sizeof (unsigned char) * 3 * h->cm_num); + SDL_memcpy (h->cm_map, prop.data.colormap.cmap, 3*sizeof (char)*h->cm_num); + SDL_free (prop.data.colormap.cmap); + } + } while (prop.id != PROP_END); + + return h; +} + +static void free_xcf_layer (xcf_layer * l) { + SDL_free (l->name); + SDL_free (l); +} + +static xcf_layer * read_xcf_layer (SDL_RWops * src) { + xcf_layer * l; + xcf_prop prop; + + l = (xcf_layer *) SDL_malloc (sizeof (xcf_layer)); + l->width = SDL_ReadBE32 (src); + l->height = SDL_ReadBE32 (src); + l->layer_type = SDL_ReadBE32 (src); + + l->name = read_string (src); + + do { + xcf_read_property (src, &prop); + if (prop.id == PROP_OFFSETS) { + l->offset_x = prop.data.offset.x; + l->offset_y = prop.data.offset.y; + } else if (prop.id == PROP_VISIBLE) { + l->visible = prop.data.visible ? 1 : 0; + } + } while (prop.id != PROP_END); + + l->hierarchy_file_offset = SDL_ReadBE32 (src); + l->layer_mask_offset = SDL_ReadBE32 (src); + + return l; +} + +static void free_xcf_channel (xcf_channel * c) { + SDL_free (c->name); + SDL_free (c); +} + +static xcf_channel * read_xcf_channel (SDL_RWops * src) { + xcf_channel * l; + xcf_prop prop; + + l = (xcf_channel *) SDL_malloc (sizeof (xcf_channel)); + l->width = SDL_ReadBE32 (src); + l->height = SDL_ReadBE32 (src); + + l->name = read_string (src); + + l->selection = 0; + do { + xcf_read_property (src, &prop); + switch (prop.id) { + case PROP_OPACITY: + l->opacity = prop.data.opacity << 24; + break; + case PROP_COLOR: + l->color = ((Uint32) prop.data.color[0] << 16) + | ((Uint32) prop.data.color[1] << 8) + | ((Uint32) prop.data.color[2]); + break; + case PROP_SELECTION: + l->selection = 1; + break; + case PROP_VISIBLE: + l->visible = prop.data.visible ? 1 : 0; + break; + default: + ; + } + } while (prop.id != PROP_END); + + l->hierarchy_file_offset = SDL_ReadBE32 (src); + + return l; +} + +static void free_xcf_hierarchy (xcf_hierarchy * h) { + SDL_free (h->level_file_offsets); + SDL_free (h); +} + +static xcf_hierarchy * read_xcf_hierarchy (SDL_RWops * src) { + xcf_hierarchy * h; + int i; + + h = (xcf_hierarchy *) SDL_malloc (sizeof (xcf_hierarchy)); + h->width = SDL_ReadBE32 (src); + h->height = SDL_ReadBE32 (src); + h->bpp = SDL_ReadBE32 (src); + + h->level_file_offsets = NULL; + i = 0; + do { + h->level_file_offsets = (Uint32 *) SDL_realloc (h->level_file_offsets, sizeof (Uint32) * (i+1)); + h->level_file_offsets [i] = SDL_ReadBE32 (src); + } while (h->level_file_offsets [i++]); + + return h; +} + +static void free_xcf_level (xcf_level * l) { + SDL_free (l->tile_file_offsets); + SDL_free (l); +} + +static xcf_level * read_xcf_level (SDL_RWops * src) { + xcf_level * l; + int i; + + l = (xcf_level *) SDL_malloc (sizeof (xcf_level)); + l->width = SDL_ReadBE32 (src); + l->height = SDL_ReadBE32 (src); + + l->tile_file_offsets = NULL; + i = 0; + do { + l->tile_file_offsets = (Uint32 *) SDL_realloc (l->tile_file_offsets, sizeof (Uint32) * (i+1)); + l->tile_file_offsets [i] = SDL_ReadBE32 (src); + } while (l->tile_file_offsets [i++]); + + return l; +} + +static void free_xcf_tile (unsigned char * t) { + SDL_free (t); +} + +static unsigned char * load_xcf_tile_none (SDL_RWops * src, Uint32 len, int bpp, int x, int y) { + unsigned char * load; + + load = (unsigned char *) SDL_malloc (len); // expect this is okay + SDL_RWread (src, load, len, 1); + + return load; +} + +static unsigned char * load_xcf_tile_rle (SDL_RWops * src, Uint32 len, int bpp, int x, int y) { + unsigned char * load, * t, * data, * d; + Uint32 reallen; + int i, size, count, j, length; + unsigned char val; + + t = load = (unsigned char *) SDL_malloc (len); + reallen = SDL_RWread (src, t, 1, len); + + data = (unsigned char *) SDL_malloc (x*y*bpp); + for (i = 0; i < bpp; i++) { + d = data + i; + size = x*y; + count = 0; + + while (size > 0) { + val = *t++; + + length = val; + if (length >= 128) { + length = 255 - (length - 1); + if (length == 128) { + length = (*t << 8) + t[1]; + t += 2; + } + + count += length; + size -= length; + + while (length-- > 0) { + *d = *t++; + d += bpp; + } + } + else { + length += 1; + if (length == 128) { + length = (*t << 8) + t[1]; + t += 2; + } + + count += length; + size -= length; + + val = *t++; + + for (j = 0; j < length; j++) { + *d = val; + d += bpp; + } + } + } + } + + SDL_free (load); + return (data); +} + +static Uint32 rgb2grey (Uint32 a) { + Uint8 l; + l = (Uint8)(0.2990 * ((a & 0x00FF0000) >> 16) + + 0.5870 * ((a & 0x0000FF00) >> 8) + + 0.1140 * ((a & 0x000000FF))); + + return (l << 16) | (l << 8) | l; +} + +static void create_channel_surface (SDL_Surface * surf, xcf_image_type itype, Uint32 color, Uint32 opacity) { + Uint32 c = 0; + + switch (itype) { + case IMAGE_RGB: + case IMAGE_INDEXED: + c = opacity | color; + break; + case IMAGE_GREYSCALE: + c = opacity | rgb2grey (color); + break; + } + SDL_FillRect (surf, NULL, c); +} + +static int do_layer_surface (SDL_Surface * surface, SDL_RWops * src, xcf_header * head, xcf_layer * layer, load_tile_type load_tile) { + xcf_hierarchy * hierarchy; + xcf_level * level; + unsigned char * tile; + Uint8 * p8; + Uint16 * p16; + Uint32 * p; + int i, j; + Uint32 x, y, tx, ty, ox, oy; + Uint32 *row; + + SDL_RWseek (src, layer->hierarchy_file_offset, RW_SEEK_SET); + hierarchy = read_xcf_hierarchy (src); + + level = NULL; + for (i = 0; hierarchy->level_file_offsets [i]; i++) { + SDL_RWseek (src, hierarchy->level_file_offsets [i], RW_SEEK_SET); + level = read_xcf_level (src); + + ty = tx = 0; + for (j = 0; level->tile_file_offsets [j]; j++) { + SDL_RWseek (src, level->tile_file_offsets [j], RW_SEEK_SET); + ox = tx+64 > level->width ? level->width % 64 : 64; + oy = ty+64 > level->height ? level->height % 64 : 64; + + if (level->tile_file_offsets [j+1]) { + tile = load_tile + (src, + level->tile_file_offsets [j+1] - level->tile_file_offsets [j], + hierarchy->bpp, + ox, oy); + } + else { + tile = load_tile + (src, + ox*oy*6, + hierarchy->bpp, + ox, oy); + } + + p8 = tile; + p16 = (Uint16 *) p8; + p = (Uint32 *) p8; + for (y=ty; y < ty+oy; y++) { + row = (Uint32 *)((Uint8 *)surface->pixels + y*surface->pitch + tx*4); + switch (hierarchy->bpp) { + case 4: + for (x=tx; x < tx+ox; x++) + *row++ = Swap32 (*p++); + break; + case 3: + for (x=tx; x < tx+ox; x++) { + *row = 0xFF000000; + *row |= ((Uint32) *(p8++) << 16); + *row |= ((Uint32) *(p8++) << 8); + *row |= ((Uint32) *(p8++) << 0); + row++; + } + break; + case 2: // Indexed/Greyscale + Alpha + switch (head->image_type) { + case IMAGE_INDEXED: + for (x=tx; x < tx+ox; x++) { + *row = ((Uint32) (head->cm_map [*p8*3]) << 16); + *row |= ((Uint32) (head->cm_map [*p8*3+1]) << 8); + *row |= ((Uint32) (head->cm_map [*p8++*3+2]) << 0); + *row |= ((Uint32) *p8++ << 24);; + row++; + } + break; + case IMAGE_GREYSCALE: + for (x=tx; x < tx+ox; x++) { + *row = ((Uint32) *p8 << 16); + *row |= ((Uint32) *p8 << 8); + *row |= ((Uint32) *p8++ << 0); + *row |= ((Uint32) *p8++ << 24);; + row++; + } + break; + default: + fprintf (stderr, "Unknown Gimp image type (%d)\n", head->image_type); + if (hierarchy) + { + if (hierarchy->level_file_offsets) + SDL_free(hierarchy->level_file_offsets); + + free_xcf_hierarchy(hierarchy); + } + if (level) + free_xcf_level (level); + return 1; + } + break; + case 1: // Indexed/Greyscale + switch (head->image_type) { + case IMAGE_INDEXED: + for (x = tx; x < tx+ox; x++) { + *row++ = 0xFF000000 + | ((Uint32) (head->cm_map [*p8*3]) << 16) + | ((Uint32) (head->cm_map [*p8*3+1]) << 8) + | ((Uint32) (head->cm_map [*p8*3+2]) << 0); + p8++; + } + break; + case IMAGE_GREYSCALE: + for (x=tx; x < tx+ox; x++) { + *row++ = 0xFF000000 + | (((Uint32) (*p8)) << 16) + | (((Uint32) (*p8)) << 8) + | (((Uint32) (*p8)) << 0); + ++p8; + } + break; + default: + fprintf (stderr, "Unknown Gimp image type (%d)\n", head->image_type); + if (tile) + free_xcf_tile (tile); + if (level) + free_xcf_level (level); + if (hierarchy) + free_xcf_hierarchy (hierarchy); + return 1; + } + break; + } + } + tx += 64; + if (tx >= level->width) { + tx = 0; + ty += 64; + } + if (ty >= level->height) { + break; + } + + free_xcf_tile (tile); + } + free_xcf_level (level); + } + + free_xcf_hierarchy (hierarchy); + + return 0; +} + +SDL_Surface *IMG_LoadXCF_RW(SDL_RWops *src) +{ + Sint64 start; + const char *error = NULL; + SDL_Surface *surface, *lays; + xcf_header * head; + xcf_layer * layer; + xcf_channel ** channel; + int chnls, i, offsets; + Sint64 offset, fp; + + unsigned char * (* load_tile) (SDL_RWops *, Uint32, int, int, int); + + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + start = SDL_RWtell(src); + + /* Initialize the data we will clean up when we're done */ + surface = NULL; + + head = read_xcf_header (src); + + switch (head->compr) { + case COMPR_NONE: + load_tile = load_xcf_tile_none; + break; + case COMPR_RLE: + load_tile = load_xcf_tile_rle; + break; + default: + fprintf (stderr, "Unsupported Compression.\n"); + free_xcf_header (head); + return NULL; + } + + /* Create the surface of the appropriate type */ + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, head->width, head->height, 32, + 0x00FF0000,0x0000FF00,0x000000FF,0xFF000000); + + if ( surface == NULL ) { + error = "Out of memory"; + goto done; + } + + offsets = 0; + + while ((offset = SDL_ReadBE32 (src))) { + head->layer_file_offsets = (Uint32 *) SDL_realloc (head->layer_file_offsets, sizeof (Uint32) * (offsets+1)); + head->layer_file_offsets [offsets] = (Uint32)offset; + offsets++; + } + fp = SDL_RWtell (src); + + lays = SDL_CreateRGBSurface(SDL_SWSURFACE, head->width, head->height, 32, + 0x00FF0000,0x0000FF00,0x000000FF,0xFF000000); + + if ( lays == NULL ) { + error = "Out of memory"; + goto done; + } + + // Blit layers backwards, because Gimp saves them highest first + for (i = offsets; i > 0; i--) { + SDL_Rect rs, rd; + SDL_RWseek (src, head->layer_file_offsets [i-1], RW_SEEK_SET); + + layer = read_xcf_layer (src); + do_layer_surface (lays, src, head, layer, load_tile); + rs.x = 0; + rs.y = 0; + rs.w = layer->width; + rs.h = layer->height; + rd.x = layer->offset_x; + rd.y = layer->offset_y; + rd.w = layer->width; + rd.h = layer->height; + + if (layer->visible) + SDL_BlitSurface (lays, &rs, surface, &rd); + free_xcf_layer (layer); + } + + SDL_FreeSurface (lays); + + SDL_RWseek (src, fp, RW_SEEK_SET); + + // read channels + channel = NULL; + chnls = 0; + while ((offset = SDL_ReadBE32 (src))) { + channel = (xcf_channel **) SDL_realloc (channel, sizeof (xcf_channel *) * (chnls+1)); + fp = SDL_RWtell (src); + SDL_RWseek (src, offset, RW_SEEK_SET); + channel [chnls++] = (read_xcf_channel (src)); + SDL_RWseek (src, fp, RW_SEEK_SET); + } + + if (chnls) { + SDL_Surface * chs; + + chs = SDL_CreateRGBSurface(SDL_SWSURFACE, head->width, head->height, 32, + 0x00FF0000,0x0000FF00,0x000000FF,0xFF000000); + + if (chs == NULL) { + error = "Out of memory"; + goto done; + } + for (i = 0; i < chnls; i++) { + // printf ("CNLBLT %i\n", i); + if (!channel [i]->selection && channel [i]->visible) { + create_channel_surface (chs, (xcf_image_type)head->image_type, channel [i]->color, channel [i]->opacity); + SDL_BlitSurface (chs, NULL, surface, NULL); + } + free_xcf_channel (channel [i]); + } + + SDL_FreeSurface (chs); + } + +done: + free_xcf_header (head); + if ( error ) { + SDL_RWseek(src, start, RW_SEEK_SET); + if ( surface ) { + SDL_FreeSurface(surface); + surface = NULL; + } + IMG_SetError(error); + } + + return(surface); +} + +#else + +/* See if an image is contained in a data source */ +int IMG_isXCF(SDL_RWops *src) +{ + return(0); +} + +/* Load a XCF type image from an SDL datasource */ +SDL_Surface *IMG_LoadXCF_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_XCF */ diff --git a/src/SDL2/IMG_xpm.c b/src/SDL2/IMG_xpm.c new file mode 100644 index 000000000..c5dd2c671 --- /dev/null +++ b/src/SDL2/IMG_xpm.c @@ -0,0 +1,1187 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* + * XPM (X PixMap) image loader: + * + * Supports the XPMv3 format, EXCEPT: + * - hotspot coordinates are ignored + * - only colour ('c') colour symbols are used + * - rgb.txt is not used (for portability), so only RGB colours + * are recognized (#rrggbb etc) - only a few basic colour names are + * handled + * + * The result is an 8bpp indexed surface if possible, otherwise 32bpp. + * The colourkey is correctly set if transparency is used. + * + * Besides the standard API, also provides + * + * SDL_Surface *IMG_ReadXPMFromArray(char **xpm) + * + * that reads the image data from an XPM file included in the C source. + * + * TODO: include rgb.txt here. The full table (from solaris 2.6) only + * requires about 13K in binary form. + */ + +#include +#include +#include +#include + +#include "SDL_image.h" + +#ifdef LOAD_XPM + +/* See if an image is contained in a data source */ +int IMG_isXPM(SDL_RWops *src) +{ + Sint64 start; + int is_XPM; + char magic[9]; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_XPM = 0; + if ( SDL_RWread(src, magic, sizeof(magic), 1) ) { + if ( SDL_memcmp(magic, "/* XPM */", sizeof(magic)) == 0 ) { + is_XPM = 1; + } + } + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_XPM); +} + +/* Hash table to look up colors from pixel strings */ +#define STARTING_HASH_SIZE 256 + +struct hash_entry { + char *key; + Uint32 color; + struct hash_entry *next; +}; + +struct color_hash { + struct hash_entry **table; + struct hash_entry *entries; /* array of all entries */ + struct hash_entry *next_free; + int size; + int maxnum; +}; + +static int hash_key(const char *key, int cpp, int size) +{ + int hash; + + hash = 0; + while ( cpp-- > 0 ) { + hash = hash * 33 + *key++; + } + return hash & (size - 1); +} + +static struct color_hash *create_colorhash(int maxnum) +{ + int bytes, s; + struct color_hash *hash; + + /* we know how many entries we need, so we can allocate + everything here */ + hash = (struct color_hash *)SDL_malloc(sizeof *hash); + if(!hash) + return NULL; + + /* use power-of-2 sized hash table for decoding speed */ + for(s = STARTING_HASH_SIZE; s < maxnum; s <<= 1) + ; + hash->size = s; + hash->maxnum = maxnum; + bytes = hash->size * sizeof(struct hash_entry **); + hash->entries = NULL; /* in case malloc fails */ + hash->table = (struct hash_entry **)SDL_malloc(bytes); + if(!hash->table) { + SDL_free(hash); + return NULL; + } + memset(hash->table, 0, bytes); + hash->entries = (struct hash_entry *)SDL_malloc(maxnum * sizeof(struct hash_entry)); + if(!hash->entries) { + SDL_free(hash->table); + SDL_free(hash); + return NULL; + } + hash->next_free = hash->entries; + return hash; +} + +static int add_colorhash(struct color_hash *hash, + char *key, int cpp, Uint32 color) +{ + int index = hash_key(key, cpp, hash->size); + struct hash_entry *e = hash->next_free++; + e->color = color; + e->key = key; + e->next = hash->table[index]; + hash->table[index] = e; + return 1; +} + +/* fast lookup that works if cpp == 1 */ +#define QUICK_COLORHASH(hash, key) ((hash)->table[*(Uint8 *)(key)]->color) + +static Uint32 get_colorhash(struct color_hash *hash, const char *key, int cpp) +{ + struct hash_entry *entry = hash->table[hash_key(key, cpp, hash->size)]; + while(entry) { + if(SDL_memcmp(key, entry->key, cpp) == 0) + return entry->color; + entry = entry->next; + } + return 0; /* garbage in - garbage out */ +} + +static void free_colorhash(struct color_hash *hash) +{ + if(hash) { + if(hash->table) + SDL_free(hash->table); + if(hash->entries) + SDL_free(hash->entries); + SDL_free(hash); + } +} + +/* + * convert colour spec to RGB (in 0xrrggbb format). + * return 1 if successful. + */ +static int color_to_rgb(char *spec, int speclen, Uint32 *rgb) +{ + /* poor man's rgb.txt */ + static struct { char *name; Uint32 rgb; } known[] = { + { "none", 0xFFFFFF }, + { "black", 0x000000 }, + { "white", 0xFFFFFF }, + { "red", 0xFF0000 }, + { "green", 0x00FF00 }, + { "blue", 0x0000FF }, +/* This table increases the size of the library by 40K, so it's disabled by default */ +#ifdef EXTENDED_XPM_COLORS + { "aliceblue", 0xf0f8ff }, + { "antiquewhite", 0xfaebd7 }, + { "antiquewhite1", 0xffefdb }, + { "antiquewhite2", 0xeedfcc }, + { "antiquewhite3", 0xcdc0b0 }, + { "antiquewhite4", 0x8b8378 }, + { "aqua", 0x00ffff }, + { "aquamarine", 0x7fffd4 }, + { "aquamarine1", 0x7fffd4 }, + { "aquamarine2", 0x76eec6 }, + { "aquamarine3", 0x66cdaa }, + { "aquamarine4", 0x458b74 }, + { "azure", 0xf0ffff }, + { "azure1", 0xf0ffff }, + { "azure2", 0xe0eeee }, + { "azure3", 0xc1cdcd }, + { "azure4", 0x838b8b }, + { "beige", 0xf5f5dc }, + { "bisque", 0xffe4c4 }, + { "bisque1", 0xffe4c4 }, + { "bisque2", 0xeed5b7 }, + { "bisque3", 0xcdb79e }, + { "bisque4", 0x8b7d6b }, + { "black", 0x000000 }, + { "blanchedalmond", 0xffebcd }, + { "blue", 0x0000ff }, + { "blue1", 0x0000ff }, + { "blue2", 0x0000ee }, + { "blue3", 0x0000cd }, + { "blue4", 0x00008B }, + { "blueviolet", 0x8a2be2 }, + { "brown", 0xA52A2A }, + { "brown1", 0xFF4040 }, + { "brown2", 0xEE3B3B }, + { "brown3", 0xCD3333 }, + { "brown4", 0x8B2323 }, + { "burlywood", 0xDEB887 }, + { "burlywood1", 0xFFD39B }, + { "burlywood2", 0xEEC591 }, + { "burlywood3", 0xCDAA7D }, + { "burlywood4", 0x8B7355 }, + { "cadetblue", 0x5F9EA0 }, + { "cadetblue", 0x5f9ea0 }, + { "cadetblue1", 0x98f5ff }, + { "cadetblue2", 0x8ee5ee }, + { "cadetblue3", 0x7ac5cd }, + { "cadetblue4", 0x53868b }, + { "chartreuse", 0x7FFF00 }, + { "chartreuse1", 0x7FFF00 }, + { "chartreuse2", 0x76EE00 }, + { "chartreuse3", 0x66CD00 }, + { "chartreuse4", 0x458B00 }, + { "chocolate", 0xD2691E }, + { "chocolate1", 0xFF7F24 }, + { "chocolate2", 0xEE7621 }, + { "chocolate3", 0xCD661D }, + { "chocolate4", 0x8B4513 }, + { "coral", 0xFF7F50 }, + { "coral1", 0xFF7256 }, + { "coral2", 0xEE6A50 }, + { "coral3", 0xCD5B45 }, + { "coral4", 0x8B3E2F }, + { "cornflowerblue", 0x6495ed }, + { "cornsilk", 0xFFF8DC }, + { "cornsilk1", 0xFFF8DC }, + { "cornsilk2", 0xEEE8CD }, + { "cornsilk3", 0xCDC8B1 }, + { "cornsilk4", 0x8B8878 }, + { "crimson", 0xDC143C }, + { "cyan", 0x00FFFF }, + { "cyan1", 0x00FFFF }, + { "cyan2", 0x00EEEE }, + { "cyan3", 0x00CDCD }, + { "cyan4", 0x008B8B }, + { "darkblue", 0x00008b }, + { "darkcyan", 0x008b8b }, + { "darkgoldenrod", 0xb8860b }, + { "darkgoldenrod1", 0xffb90f }, + { "darkgoldenrod2", 0xeead0e }, + { "darkgoldenrod3", 0xcd950c }, + { "darkgoldenrod4", 0x8b6508 }, + { "darkgray", 0xa9a9a9 }, + { "darkgreen", 0x006400 }, + { "darkgrey", 0xa9a9a9 }, + { "darkkhaki", 0xbdb76b }, + { "darkmagenta", 0x8b008b }, + { "darkolivegreen", 0x556b2f }, + { "darkolivegreen1", 0xcaff70 }, + { "darkolivegreen2", 0xbcee68 }, + { "darkolivegreen3", 0xa2cd5a }, + { "darkolivegreen4", 0x6e8b3d }, + { "darkorange", 0xff8c00 }, + { "darkorange1", 0xff7f00 }, + { "darkorange2", 0xee7600 }, + { "darkorange3", 0xcd6600 }, + { "darkorange4", 0x8b4500 }, + { "darkorchid", 0x9932cc }, + { "darkorchid1", 0xbf3eff }, + { "darkorchid2", 0xb23aee }, + { "darkorchid3", 0x9a32cd }, + { "darkorchid4", 0x68228b }, + { "darkred", 0x8b0000 }, + { "darksalmon", 0xe9967a }, + { "darkseagreen", 0x8fbc8f }, + { "darkseagreen1", 0xc1ffc1 }, + { "darkseagreen2", 0xb4eeb4 }, + { "darkseagreen3", 0x9bcd9b }, + { "darkseagreen4", 0x698b69 }, + { "darkslateblue", 0x483d8b }, + { "darkslategray", 0x2f4f4f }, + { "darkslategray1", 0x97ffff }, + { "darkslategray2", 0x8deeee }, + { "darkslategray3", 0x79cdcd }, + { "darkslategray4", 0x528b8b }, + { "darkslategrey", 0x2f4f4f }, + { "darkturquoise", 0x00ced1 }, + { "darkviolet", 0x9400D3 }, + { "darkviolet", 0x9400d3 }, + { "deeppink", 0xff1493 }, + { "deeppink1", 0xff1493 }, + { "deeppink2", 0xee1289 }, + { "deeppink3", 0xcd1076 }, + { "deeppink4", 0x8b0a50 }, + { "deepskyblue", 0x00bfff }, + { "deepskyblue1", 0x00bfff }, + { "deepskyblue2", 0x00b2ee }, + { "deepskyblue3", 0x009acd }, + { "deepskyblue4", 0x00688b }, + { "dimgray", 0x696969 }, + { "dimgrey", 0x696969 }, + { "dodgerblue", 0x1e90ff }, + { "dodgerblue1", 0x1e90ff }, + { "dodgerblue2", 0x1c86ee }, + { "dodgerblue3", 0x1874cd }, + { "dodgerblue4", 0x104e8b }, + { "firebrick", 0xB22222 }, + { "firebrick1", 0xFF3030 }, + { "firebrick2", 0xEE2C2C }, + { "firebrick3", 0xCD2626 }, + { "firebrick4", 0x8B1A1A }, + { "floralwhite", 0xfffaf0 }, + { "forestgreen", 0x228b22 }, + { "fractal", 0x808080 }, + { "fuchsia", 0xFF00FF }, + { "gainsboro", 0xDCDCDC }, + { "ghostwhite", 0xf8f8ff }, + { "gold", 0xFFD700 }, + { "gold1", 0xFFD700 }, + { "gold2", 0xEEC900 }, + { "gold3", 0xCDAD00 }, + { "gold4", 0x8B7500 }, + { "goldenrod", 0xDAA520 }, + { "goldenrod1", 0xFFC125 }, + { "goldenrod2", 0xEEB422 }, + { "goldenrod3", 0xCD9B1D }, + { "goldenrod4", 0x8B6914 }, + { "gray", 0x7E7E7E }, + { "gray", 0xBEBEBE }, + { "gray0", 0x000000 }, + { "gray1", 0x030303 }, + { "gray10", 0x1A1A1A }, + { "gray100", 0xFFFFFF }, + { "gray11", 0x1C1C1C }, + { "gray12", 0x1F1F1F }, + { "gray13", 0x212121 }, + { "gray14", 0x242424 }, + { "gray15", 0x262626 }, + { "gray16", 0x292929 }, + { "gray17", 0x2B2B2B }, + { "gray18", 0x2E2E2E }, + { "gray19", 0x303030 }, + { "gray2", 0x050505 }, + { "gray20", 0x333333 }, + { "gray21", 0x363636 }, + { "gray22", 0x383838 }, + { "gray23", 0x3B3B3B }, + { "gray24", 0x3D3D3D }, + { "gray25", 0x404040 }, + { "gray26", 0x424242 }, + { "gray27", 0x454545 }, + { "gray28", 0x474747 }, + { "gray29", 0x4A4A4A }, + { "gray3", 0x080808 }, + { "gray30", 0x4D4D4D }, + { "gray31", 0x4F4F4F }, + { "gray32", 0x525252 }, + { "gray33", 0x545454 }, + { "gray34", 0x575757 }, + { "gray35", 0x595959 }, + { "gray36", 0x5C5C5C }, + { "gray37", 0x5E5E5E }, + { "gray38", 0x616161 }, + { "gray39", 0x636363 }, + { "gray4", 0x0A0A0A }, + { "gray40", 0x666666 }, + { "gray41", 0x696969 }, + { "gray42", 0x6B6B6B }, + { "gray43", 0x6E6E6E }, + { "gray44", 0x707070 }, + { "gray45", 0x737373 }, + { "gray46", 0x757575 }, + { "gray47", 0x787878 }, + { "gray48", 0x7A7A7A }, + { "gray49", 0x7D7D7D }, + { "gray5", 0x0D0D0D }, + { "gray50", 0x7F7F7F }, + { "gray51", 0x828282 }, + { "gray52", 0x858585 }, + { "gray53", 0x878787 }, + { "gray54", 0x8A8A8A }, + { "gray55", 0x8C8C8C }, + { "gray56", 0x8F8F8F }, + { "gray57", 0x919191 }, + { "gray58", 0x949494 }, + { "gray59", 0x969696 }, + { "gray6", 0x0F0F0F }, + { "gray60", 0x999999 }, + { "gray61", 0x9C9C9C }, + { "gray62", 0x9E9E9E }, + { "gray63", 0xA1A1A1 }, + { "gray64", 0xA3A3A3 }, + { "gray65", 0xA6A6A6 }, + { "gray66", 0xA8A8A8 }, + { "gray67", 0xABABAB }, + { "gray68", 0xADADAD }, + { "gray69", 0xB0B0B0 }, + { "gray7", 0x121212 }, + { "gray70", 0xB3B3B3 }, + { "gray71", 0xB5B5B5 }, + { "gray72", 0xB8B8B8 }, + { "gray73", 0xBABABA }, + { "gray74", 0xBDBDBD }, + { "gray75", 0xBFBFBF }, + { "gray76", 0xC2C2C2 }, + { "gray77", 0xC4C4C4 }, + { "gray78", 0xC7C7C7 }, + { "gray79", 0xC9C9C9 }, + { "gray8", 0x141414 }, + { "gray80", 0xCCCCCC }, + { "gray81", 0xCFCFCF }, + { "gray82", 0xD1D1D1 }, + { "gray83", 0xD4D4D4 }, + { "gray84", 0xD6D6D6 }, + { "gray85", 0xD9D9D9 }, + { "gray86", 0xDBDBDB }, + { "gray87", 0xDEDEDE }, + { "gray88", 0xE0E0E0 }, + { "gray89", 0xE3E3E3 }, + { "gray9", 0x171717 }, + { "gray90", 0xE5E5E5 }, + { "gray91", 0xE8E8E8 }, + { "gray92", 0xEBEBEB }, + { "gray93", 0xEDEDED }, + { "gray94", 0xF0F0F0 }, + { "gray95", 0xF2F2F2 }, + { "gray96", 0xF5F5F5 }, + { "gray97", 0xF7F7F7 }, + { "gray98", 0xFAFAFA }, + { "gray99", 0xFCFCFC }, + { "green", 0x008000 }, + { "green", 0x00FF00 }, + { "green1", 0x00FF00 }, + { "green2", 0x00EE00 }, + { "green3", 0x00CD00 }, + { "green4", 0x008B00 }, + { "greenyellow", 0xadff2f }, + { "grey", 0xBEBEBE }, + { "grey0", 0x000000 }, + { "grey1", 0x030303 }, + { "grey10", 0x1A1A1A }, + { "grey100", 0xFFFFFF }, + { "grey11", 0x1C1C1C }, + { "grey12", 0x1F1F1F }, + { "grey13", 0x212121 }, + { "grey14", 0x242424 }, + { "grey15", 0x262626 }, + { "grey16", 0x292929 }, + { "grey17", 0x2B2B2B }, + { "grey18", 0x2E2E2E }, + { "grey19", 0x303030 }, + { "grey2", 0x050505 }, + { "grey20", 0x333333 }, + { "grey21", 0x363636 }, + { "grey22", 0x383838 }, + { "grey23", 0x3B3B3B }, + { "grey24", 0x3D3D3D }, + { "grey25", 0x404040 }, + { "grey26", 0x424242 }, + { "grey27", 0x454545 }, + { "grey28", 0x474747 }, + { "grey29", 0x4A4A4A }, + { "grey3", 0x080808 }, + { "grey30", 0x4D4D4D }, + { "grey31", 0x4F4F4F }, + { "grey32", 0x525252 }, + { "grey33", 0x545454 }, + { "grey34", 0x575757 }, + { "grey35", 0x595959 }, + { "grey36", 0x5C5C5C }, + { "grey37", 0x5E5E5E }, + { "grey38", 0x616161 }, + { "grey39", 0x636363 }, + { "grey4", 0x0A0A0A }, + { "grey40", 0x666666 }, + { "grey41", 0x696969 }, + { "grey42", 0x6B6B6B }, + { "grey43", 0x6E6E6E }, + { "grey44", 0x707070 }, + { "grey45", 0x737373 }, + { "grey46", 0x757575 }, + { "grey47", 0x787878 }, + { "grey48", 0x7A7A7A }, + { "grey49", 0x7D7D7D }, + { "grey5", 0x0D0D0D }, + { "grey50", 0x7F7F7F }, + { "grey51", 0x828282 }, + { "grey52", 0x858585 }, + { "grey53", 0x878787 }, + { "grey54", 0x8A8A8A }, + { "grey55", 0x8C8C8C }, + { "grey56", 0x8F8F8F }, + { "grey57", 0x919191 }, + { "grey58", 0x949494 }, + { "grey59", 0x969696 }, + { "grey6", 0x0F0F0F }, + { "grey60", 0x999999 }, + { "grey61", 0x9C9C9C }, + { "grey62", 0x9E9E9E }, + { "grey63", 0xA1A1A1 }, + { "grey64", 0xA3A3A3 }, + { "grey65", 0xA6A6A6 }, + { "grey66", 0xA8A8A8 }, + { "grey67", 0xABABAB }, + { "grey68", 0xADADAD }, + { "grey69", 0xB0B0B0 }, + { "grey7", 0x121212 }, + { "grey70", 0xB3B3B3 }, + { "grey71", 0xB5B5B5 }, + { "grey72", 0xB8B8B8 }, + { "grey73", 0xBABABA }, + { "grey74", 0xBDBDBD }, + { "grey75", 0xBFBFBF }, + { "grey76", 0xC2C2C2 }, + { "grey77", 0xC4C4C4 }, + { "grey78", 0xC7C7C7 }, + { "grey79", 0xC9C9C9 }, + { "grey8", 0x141414 }, + { "grey80", 0xCCCCCC }, + { "grey81", 0xCFCFCF }, + { "grey82", 0xD1D1D1 }, + { "grey83", 0xD4D4D4 }, + { "grey84", 0xD6D6D6 }, + { "grey85", 0xD9D9D9 }, + { "grey86", 0xDBDBDB }, + { "grey87", 0xDEDEDE }, + { "grey88", 0xE0E0E0 }, + { "grey89", 0xE3E3E3 }, + { "grey9", 0x171717 }, + { "grey90", 0xE5E5E5 }, + { "grey91", 0xE8E8E8 }, + { "grey92", 0xEBEBEB }, + { "grey93", 0xEDEDED }, + { "grey94", 0xF0F0F0 }, + { "grey95", 0xF2F2F2 }, + { "grey96", 0xF5F5F5 }, + { "grey97", 0xF7F7F7 }, + { "grey98", 0xFAFAFA }, + { "grey99", 0xFCFCFC }, + { "honeydew", 0xF0FFF0 }, + { "honeydew1", 0xF0FFF0 }, + { "honeydew2", 0xE0EEE0 }, + { "honeydew3", 0xC1CDC1 }, + { "honeydew4", 0x838B83 }, + { "hotpink", 0xff69b4 }, + { "hotpink1", 0xff6eb4 }, + { "hotpink2", 0xee6aa7 }, + { "hotpink3", 0xcd6090 }, + { "hotpink4", 0x8b3a62 }, + { "indianred", 0xcd5c5c }, + { "indianred1", 0xff6a6a }, + { "indianred2", 0xee6363 }, + { "indianred3", 0xcd5555 }, + { "indianred4", 0x8b3a3a }, + { "indigo", 0x4B0082 }, + { "ivory", 0xFFFFF0 }, + { "ivory1", 0xFFFFF0 }, + { "ivory2", 0xEEEEE0 }, + { "ivory3", 0xCDCDC1 }, + { "ivory4", 0x8B8B83 }, + { "khaki", 0xF0E68C }, + { "khaki1", 0xFFF68F }, + { "khaki2", 0xEEE685 }, + { "khaki3", 0xCDC673 }, + { "khaki4", 0x8B864E }, + { "lavender", 0xE6E6FA }, + { "lavenderblush", 0xfff0f5 }, + { "lavenderblush1", 0xfff0f5 }, + { "lavenderblush2", 0xeee0e5 }, + { "lavenderblush3", 0xcdc1c5 }, + { "lavenderblush4", 0x8b8386 }, + { "lawngreen", 0x7cfc00 }, + { "lemonchiffon", 0xfffacd }, + { "lemonchiffon1", 0xfffacd }, + { "lemonchiffon2", 0xeee9bf }, + { "lemonchiffon3", 0xcdc9a5 }, + { "lemonchiffon4", 0x8b8970 }, + { "lightblue", 0xadd8e6 }, + { "lightblue1", 0xbfefff }, + { "lightblue2", 0xb2dfee }, + { "lightblue3", 0x9ac0cd }, + { "lightblue4", 0x68838b }, + { "lightcoral", 0xf08080 }, + { "lightcyan", 0xe0ffff }, + { "lightcyan1", 0xe0ffff }, + { "lightcyan2", 0xd1eeee }, + { "lightcyan3", 0xb4cdcd }, + { "lightcyan4", 0x7a8b8b }, + { "lightgoldenrod", 0xeedd82 }, + { "lightgoldenrod1", 0xffec8b }, + { "lightgoldenrod2", 0xeedc82 }, + { "lightgoldenrod3", 0xcdbe70 }, + { "lightgoldenrod4", 0x8b814c }, + { "lightgoldenrodyellow", 0xfafad2 }, + { "lightgray", 0xd3d3d3 }, + { "lightgreen", 0x90ee90 }, + { "lightgrey", 0xd3d3d3 }, + { "lightpink", 0xffb6c1 }, + { "lightpink1", 0xffaeb9 }, + { "lightpink2", 0xeea2ad }, + { "lightpink3", 0xcd8c95 }, + { "lightpink4", 0x8b5f65 }, + { "lightsalmon", 0xffa07a }, + { "lightsalmon1", 0xffa07a }, + { "lightsalmon2", 0xee9572 }, + { "lightsalmon3", 0xcd8162 }, + { "lightsalmon4", 0x8b5742 }, + { "lightseagreen", 0x20b2aa }, + { "lightskyblue", 0x87cefa }, + { "lightskyblue1", 0xb0e2ff }, + { "lightskyblue2", 0xa4d3ee }, + { "lightskyblue3", 0x8db6cd }, + { "lightskyblue4", 0x607b8b }, + { "lightslateblue", 0x8470ff }, + { "lightslategray", 0x778899 }, + { "lightslategrey", 0x778899 }, + { "lightsteelblue", 0xb0c4de }, + { "lightsteelblue1", 0xcae1ff }, + { "lightsteelblue2", 0xbcd2ee }, + { "lightsteelblue3", 0xa2b5cd }, + { "lightsteelblue4", 0x6e7b8b }, + { "lightyellow", 0xffffe0 }, + { "lightyellow1", 0xffffe0 }, + { "lightyellow2", 0xeeeed1 }, + { "lightyellow3", 0xcdcdb4 }, + { "lightyellow4", 0x8b8b7a }, + { "lime", 0x00FF00 }, + { "limegreen", 0x32cd32 }, + { "linen", 0xFAF0E6 }, + { "magenta", 0xFF00FF }, + { "magenta1", 0xFF00FF }, + { "magenta2", 0xEE00EE }, + { "magenta3", 0xCD00CD }, + { "magenta4", 0x8B008B }, + { "maroon", 0x800000 }, + { "maroon", 0xB03060 }, + { "maroon1", 0xFF34B3 }, + { "maroon2", 0xEE30A7 }, + { "maroon3", 0xCD2990 }, + { "maroon4", 0x8B1C62 }, + { "mediumaquamarine", 0x66cdaa }, + { "mediumblue", 0x0000cd }, + { "mediumforestgreen", 0x32814b }, + { "mediumgoldenrod", 0xd1c166 }, + { "mediumorchid", 0xba55d3 }, + { "mediumorchid1", 0xe066ff }, + { "mediumorchid2", 0xd15fee }, + { "mediumorchid3", 0xb452cd }, + { "mediumorchid4", 0x7a378b }, + { "mediumpurple", 0x9370db }, + { "mediumpurple1", 0xab82ff }, + { "mediumpurple2", 0x9f79ee }, + { "mediumpurple3", 0x8968cd }, + { "mediumpurple4", 0x5d478b }, + { "mediumseagreen", 0x3cb371 }, + { "mediumslateblue", 0x7b68ee }, + { "mediumspringgreen", 0x00fa9a }, + { "mediumturquoise", 0x48d1cc }, + { "mediumvioletred", 0xc71585 }, + { "midnightblue", 0x191970 }, + { "mintcream", 0xf5fffa }, + { "mistyrose", 0xffe4e1 }, + { "mistyrose1", 0xffe4e1 }, + { "mistyrose2", 0xeed5d2 }, + { "mistyrose3", 0xcdb7b5 }, + { "mistyrose4", 0x8b7d7b }, + { "moccasin", 0xFFE4B5 }, + { "navajowhite", 0xffdead }, + { "navajowhite1", 0xffdead }, + { "navajowhite2", 0xeecfa1 }, + { "navajowhite3", 0xcdb38b }, + { "navajowhite4", 0x8b795e }, + { "navy", 0x000080 }, + { "navyblue", 0x000080 }, + { "none", 0x0000FF }, + { "oldlace", 0xfdf5e6 }, + { "olive", 0x808000 }, + { "olivedrab", 0x6b8e23 }, + { "olivedrab1", 0xc0ff3e }, + { "olivedrab2", 0xb3ee3a }, + { "olivedrab3", 0x9acd32 }, + { "olivedrab4", 0x698b22 }, + { "opaque", 0x000000 }, + { "orange", 0xFFA500 }, + { "orange1", 0xFFA500 }, + { "orange2", 0xEE9A00 }, + { "orange3", 0xCD8500 }, + { "orange4", 0x8B5A00 }, + { "orangered", 0xff4500 }, + { "orangered1", 0xff4500 }, + { "orangered2", 0xee4000 }, + { "orangered3", 0xcd3700 }, + { "orangered4", 0x8b2500 }, + { "orchid", 0xDA70D6 }, + { "orchid1", 0xFF83FA }, + { "orchid2", 0xEE7AE9 }, + { "orchid3", 0xCD69C9 }, + { "orchid4", 0x8B4789 }, + { "palegoldenrod", 0xeee8aa }, + { "palegreen", 0x98fb98 }, + { "palegreen1", 0x9aff9a }, + { "palegreen2", 0x90ee90 }, + { "palegreen3", 0x7ccd7c }, + { "palegreen4", 0x548b54 }, + { "paleturquoise", 0xafeeee }, + { "paleturquoise1", 0xbbffff }, + { "paleturquoise2", 0xaeeeee }, + { "paleturquoise3", 0x96cdcd }, + { "paleturquoise4", 0x668b8b }, + { "palevioletred", 0xdb7093 }, + { "palevioletred1", 0xff82ab }, + { "palevioletred2", 0xee799f }, + { "palevioletred3", 0xcd6889 }, + { "palevioletred4", 0x8b475d }, + { "papayawhip", 0xffefd5 }, + { "peachpuff", 0xffdab9 }, + { "peachpuff1", 0xffdab9 }, + { "peachpuff2", 0xeecbad }, + { "peachpuff3", 0xcdaf95 }, + { "peachpuff4", 0x8b7765 }, + { "peru", 0xCD853F }, + { "pink", 0xFFC0CB }, + { "pink1", 0xFFB5C5 }, + { "pink2", 0xEEA9B8 }, + { "pink3", 0xCD919E }, + { "pink4", 0x8B636C }, + { "plum", 0xDDA0DD }, + { "plum1", 0xFFBBFF }, + { "plum2", 0xEEAEEE }, + { "plum3", 0xCD96CD }, + { "plum4", 0x8B668B }, + { "powderblue", 0xb0e0e6 }, + { "purple", 0x800080 }, + { "purple", 0xA020F0 }, + { "purple1", 0x9B30FF }, + { "purple2", 0x912CEE }, + { "purple3", 0x7D26CD }, + { "purple4", 0x551A8B }, + { "red", 0xFF0000 }, + { "red1", 0xFF0000 }, + { "red2", 0xEE0000 }, + { "red3", 0xCD0000 }, + { "red4", 0x8B0000 }, + { "rosybrown", 0xbc8f8f }, + { "rosybrown1", 0xffc1c1 }, + { "rosybrown2", 0xeeb4b4 }, + { "rosybrown3", 0xcd9b9b }, + { "rosybrown4", 0x8b6969 }, + { "royalblue", 0x4169e1 }, + { "royalblue1", 0x4876ff }, + { "royalblue2", 0x436eee }, + { "royalblue3", 0x3a5fcd }, + { "royalblue4", 0x27408b }, + { "saddlebrown", 0x8b4513 }, + { "salmon", 0xFA8072 }, + { "salmon1", 0xFF8C69 }, + { "salmon2", 0xEE8262 }, + { "salmon3", 0xCD7054 }, + { "salmon4", 0x8B4C39 }, + { "sandybrown", 0xf4a460 }, + { "seagreen", 0x2e8b57 }, + { "seagreen1", 0x54ff9f }, + { "seagreen2", 0x4eee94 }, + { "seagreen3", 0x43cd80 }, + { "seagreen4", 0x2e8b57 }, + { "seashell", 0xFFF5EE }, + { "seashell1", 0xFFF5EE }, + { "seashell2", 0xEEE5DE }, + { "seashell3", 0xCDC5BF }, + { "seashell4", 0x8B8682 }, + { "sienna", 0xA0522D }, + { "sienna1", 0xFF8247 }, + { "sienna2", 0xEE7942 }, + { "sienna3", 0xCD6839 }, + { "sienna4", 0x8B4726 }, + { "silver", 0xC0C0C0 }, + { "skyblue", 0x87ceeb }, + { "skyblue1", 0x87ceff }, + { "skyblue2", 0x7ec0ee }, + { "skyblue3", 0x6ca6cd }, + { "skyblue4", 0x4a708b }, + { "slateblue", 0x6a5acd }, + { "slateblue1", 0x836fff }, + { "slateblue2", 0x7a67ee }, + { "slateblue3", 0x6959cd }, + { "slateblue4", 0x473c8b }, + { "slategray", 0x708090 }, + { "slategray1", 0xc6e2ff }, + { "slategray2", 0xb9d3ee }, + { "slategray3", 0x9fb6cd }, + { "slategray4", 0x6c7b8b }, + { "slategrey", 0x708090 }, + { "snow", 0xFFFAFA }, + { "snow1", 0xFFFAFA }, + { "snow2", 0xEEE9E9 }, + { "snow3", 0xCDC9C9 }, + { "snow4", 0x8B8989 }, + { "springgreen", 0x00ff7f }, + { "springgreen1", 0x00ff7f }, + { "springgreen2", 0x00ee76 }, + { "springgreen3", 0x00cd66 }, + { "springgreen4", 0x008b45 }, + { "steelblue", 0x4682b4 }, + { "steelblue1", 0x63b8ff }, + { "steelblue2", 0x5cacee }, + { "steelblue3", 0x4f94cd }, + { "steelblue4", 0x36648b }, + { "tan", 0xD2B48C }, + { "tan1", 0xFFA54F }, + { "tan2", 0xEE9A49 }, + { "tan3", 0xCD853F }, + { "tan4", 0x8B5A2B }, + { "teal", 0x008080 }, + { "thistle", 0xD8BFD8 }, + { "thistle1", 0xFFE1FF }, + { "thistle2", 0xEED2EE }, + { "thistle3", 0xCDB5CD }, + { "thistle4", 0x8B7B8B }, + { "tomato", 0xFF6347 }, + { "tomato1", 0xFF6347 }, + { "tomato2", 0xEE5C42 }, + { "tomato3", 0xCD4F39 }, + { "tomato4", 0x8B3626 }, + { "transparent", 0x0000FF }, + { "turquoise", 0x40E0D0 }, + { "turquoise1", 0x00F5FF }, + { "turquoise2", 0x00E5EE }, + { "turquoise3", 0x00C5CD }, + { "turquoise4", 0x00868B }, + { "violet", 0xEE82EE }, + { "violetred", 0xd02090 }, + { "violetred1", 0xff3e96 }, + { "violetred2", 0xee3a8c }, + { "violetred3", 0xcd3278 }, + { "violetred4", 0x8b2252 }, + { "wheat", 0xF5DEB3 }, + { "wheat1", 0xFFE7BA }, + { "wheat2", 0xEED8AE }, + { "wheat3", 0xCDBA96 }, + { "wheat4", 0x8B7E66 }, + { "white", 0xFFFFFF }, + { "whitesmoke", 0xf5f5f5 }, + { "yellow", 0xFFFF00 }, + { "yellow1", 0xFFFF00 }, + { "yellow2", 0xEEEE00 }, + { "yellow3", 0xCDCD00 }, + { "yellow4", 0x8B8B00 }, + { "yellowgreen", 0x9acd32 }, +#endif /* EXTENDED_XPM_COLORS */ + {"none", 0xFFFFFF} + }; + + if(spec[0] == '#') { + char buf[7]; + switch(speclen) { + case 4: + buf[0] = buf[1] = spec[1]; + buf[2] = buf[3] = spec[2]; + buf[4] = buf[5] = spec[3]; + break; + case 7: + SDL_memcpy(buf, spec + 1, 6); + break; + case 13: + buf[0] = spec[1]; + buf[1] = spec[2]; + buf[2] = spec[5]; + buf[3] = spec[6]; + buf[4] = spec[9]; + buf[5] = spec[10]; + break; + } + buf[6] = '\0'; + *rgb = strtol(buf, NULL, 16); + return 1; + } else { + int i; + for(i = 0; i < SDL_arraysize(known); i++) + if(SDL_strncasecmp(known[i].name, spec, speclen) == 0) { + *rgb = known[i].rgb; + return 1; + } + return 0; + } +} + +#ifndef MAX +#define MAX(a, b) ((a) > (b) ? (a) : (b)) +#endif + +static char *linebuf; +static int buflen; +static char *error; + +/* + * Read next line from the source. + * If len > 0, it's assumed to be at least len chars (for efficiency). + * Return NULL and set error upon EOF or parse error. + */ +static char *get_next_line(char ***lines, SDL_RWops *src, int len) +{ + char *linebufnew; + + if(lines) { + return *(*lines)++; + } else { + char c; + int n; + do { + if(SDL_RWread(src, &c, 1, 1) <= 0) { + error = "Premature end of data"; + return NULL; + } + } while(c != '"'); + if(len) { + len += 4; /* "\",\n\0" */ + if(len > buflen){ + buflen = len; + linebufnew = (char *)SDL_realloc(linebuf, buflen); + if(!linebufnew) { + SDL_free(linebuf); + error = "Out of memory"; + return NULL; + } + linebuf = linebufnew; + } + if(SDL_RWread(src, linebuf, len - 1, 1) <= 0) { + error = "Premature end of data"; + return NULL; + } + n = len - 2; + } else { + n = 0; + do { + if(n >= buflen - 1) { + if(buflen == 0) + buflen = 16; + buflen *= 2; + linebufnew = (char *)SDL_realloc(linebuf, buflen); + if(!linebufnew) { + SDL_free(linebuf); + error = "Out of memory"; + return NULL; + } + linebuf = linebufnew; + } + if(SDL_RWread(src, linebuf + n, 1, 1) <= 0) { + error = "Premature end of data"; + return NULL; + } + } while(linebuf[n++] != '"'); + n--; + } + linebuf[n] = '\0'; + return linebuf; + } +} + +#define SKIPSPACE(p) \ +do { \ + while(SDL_isspace((unsigned char)*(p))) \ + ++(p); \ +} while(0) + +#define SKIPNONSPACE(p) \ +do { \ + while(!SDL_isspace((unsigned char)*(p)) && *p) \ + ++(p); \ +} while(0) + +/* read XPM from either array or RWops */ +static SDL_Surface *load_xpm(char **xpm, SDL_RWops *src) +{ + Sint64 start = 0; + SDL_Surface *image = NULL; + int index; + int x, y; + int w, h, ncolors, cpp; + int indexed; + Uint8 *dst; + struct color_hash *colors = NULL; + SDL_Color *im_colors = NULL; + char *keystrings = NULL, *nextkey; + char *line; + char ***xpmlines = NULL; + int pixels_len; + + error = NULL; + linebuf = NULL; + buflen = 0; + + if ( src ) + start = SDL_RWtell(src); + + if(xpm) + xpmlines = &xpm; + + line = get_next_line(xpmlines, src, 0); + if(!line) + goto done; + /* + * The header string of an XPMv3 image has the format + * + * [ ] + * + * where the hotspot coords are intended for mouse cursors. + * Right now we don't use the hotspots but it should be handled + * one day. + */ + if(SDL_sscanf(line, "%d %d %d %d", &w, &h, &ncolors, &cpp) != 4 + || w <= 0 || h <= 0 || ncolors <= 0 || cpp <= 0) { + error = "Invalid format description"; + goto done; + } + + keystrings = (char *)SDL_malloc(ncolors * cpp); + if(!keystrings) { + error = "Out of memory"; + goto done; + } + nextkey = keystrings; + + /* Create the new surface */ + if(ncolors <= 256) { + indexed = 1; + image = SDL_CreateRGBSurface(SDL_SWSURFACE, w, h, 8, + 0, 0, 0, 0); + im_colors = image->format->palette->colors; + image->format->palette->ncolors = ncolors; + } else { + indexed = 0; + image = SDL_CreateRGBSurface(SDL_SWSURFACE, w, h, 32, + 0xff0000, 0x00ff00, 0x0000ff, 0); + } + if(!image) { + /* Hmm, some SDL error (out of memory?) */ + goto done; + } + + /* Read the colors */ + colors = create_colorhash(ncolors); + if (!colors) { + error = "Out of memory"; + goto done; + } + for(index = 0; index < ncolors; ++index ) { + char *p; + line = get_next_line(xpmlines, src, 0); + if(!line) + goto done; + + p = line + cpp + 1; + + /* parse a colour definition */ + for(;;) { + char nametype; + char *colname; + Uint32 rgb, pixel; + + SKIPSPACE(p); + if(!*p) { + error = "colour parse error"; + goto done; + } + nametype = *p; + SKIPNONSPACE(p); + SKIPSPACE(p); + colname = p; + SKIPNONSPACE(p); + if(nametype == 's') + continue; /* skip symbolic colour names */ + + if(!color_to_rgb(colname, p - colname, &rgb)) + continue; + + SDL_memcpy(nextkey, line, cpp); + if(indexed) { + SDL_Color *c = im_colors + index; + c->r = (Uint8)(rgb >> 16); + c->g = (Uint8)(rgb >> 8); + c->b = (Uint8)(rgb); + pixel = index; + } else + pixel = rgb; + add_colorhash(colors, nextkey, cpp, pixel); + nextkey += cpp; + if(rgb == 0xffffffff) + SDL_SetColorKey(image, SDL_TRUE, pixel); + break; + } + } + + /* Read the pixels */ + pixels_len = w * cpp; + dst = (Uint8 *)image->pixels; + for(y = 0; y < h; y++) { + line = get_next_line(xpmlines, src, pixels_len); + if(indexed) { + /* optimization for some common cases */ + if(cpp == 1) + for(x = 0; x < w; x++) + dst[x] = (Uint8)QUICK_COLORHASH(colors, + line + x); + else + for(x = 0; x < w; x++) + dst[x] = (Uint8)get_colorhash(colors, + line + x * cpp, + cpp); + } else { + for (x = 0; x < w; x++) + ((Uint32*)dst)[x] = get_colorhash(colors, + line + x * cpp, + cpp); + } + dst += image->pitch; + } + +done: + if(error) { + if ( src ) + SDL_RWseek(src, start, RW_SEEK_SET); + if ( image ) { + SDL_FreeSurface(image); + image = NULL; + } + IMG_SetError(error); + } + if (keystrings) + SDL_free(keystrings); + free_colorhash(colors); + if (linebuf) + SDL_free(linebuf); + return(image); +} + +/* Load a XPM type image from an RWops datasource */ +SDL_Surface *IMG_LoadXPM_RW(SDL_RWops *src) +{ + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + return load_xpm(NULL, src); +} + +SDL_Surface *IMG_ReadXPMFromArray(char **xpm) +{ + return load_xpm(xpm, NULL); +} + +#else /* not LOAD_XPM */ + +/* See if an image is contained in a data source */ +int IMG_isXPM(SDL_RWops *src) +{ + return(0); +} + + +/* Load a XPM type image from an SDL datasource */ +SDL_Surface *IMG_LoadXPM_RW(SDL_RWops *src) +{ + return(NULL); +} + +SDL_Surface *IMG_ReadXPMFromArray(char **xpm) +{ + return NULL; +} +#endif /* not LOAD_XPM */ diff --git a/src/SDL2/IMG_xv.c b/src/SDL2/IMG_xv.c new file mode 100644 index 000000000..1251f27cf --- /dev/null +++ b/src/SDL2/IMG_xv.c @@ -0,0 +1,165 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* This is a XV thumbnail image file loading framework */ + +#include +#include + +#include "SDL_image.h" + +#ifdef LOAD_XV + +static int get_line(SDL_RWops *src, char *line, int size) +{ + while ( size > 0 ) { + if ( SDL_RWread(src, line, 1, 1) <= 0 ) { + return -1; + } + if ( *line == '\r' ) { + continue; + } + if ( *line == '\n' ) { + *line = '\0'; + return 0; + } + ++line; + --size; + } + /* Out of space for the line */ + return -1; +} + +static int get_header(SDL_RWops *src, int *w, int *h) +{ + char line[1024]; + + *w = 0; + *h = 0; + + /* Check the header magic */ + if ( (get_line(src, line, sizeof(line)) < 0) || + (SDL_memcmp(line, "P7 332", 6) != 0) ) { + return -1; + } + + /* Read the header */ + while ( get_line(src, line, sizeof(line)) == 0 ) { + if ( SDL_memcmp(line, "#BUILTIN:", 9) == 0 ) { + /* Builtin image, no data */ + break; + } + if ( SDL_memcmp(line, "#END_OF_COMMENTS", 16) == 0 ) { + if ( get_line(src, line, sizeof(line)) == 0 ) { + SDL_sscanf(line, "%d %d", w, h); + if ( *w >= 0 && *h >= 0 ) { + return 0; + } + } + break; + } + } + /* No image data */ + return -1; +} + +/* See if an image is contained in a data source */ +int IMG_isXV(SDL_RWops *src) +{ + Sint64 start; + int is_XV; + int w, h; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_XV = 0; + if ( get_header(src, &w, &h) == 0 ) { + is_XV = 1; + } + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_XV); +} + +/* Load a XV thumbnail image from an SDL datasource */ +SDL_Surface *IMG_LoadXV_RW(SDL_RWops *src) +{ + Sint64 start; + const char *error = NULL; + SDL_Surface *surface = NULL; + int w, h; + Uint8 *pixels; + + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + start = SDL_RWtell(src); + + /* Read the header */ + if ( get_header(src, &w, &h) < 0 ) { + error = "Unsupported image format"; + goto done; + } + + /* Create the 3-3-2 indexed palette surface */ + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, w, h, 8, 0xe0, 0x1c, 0x03, 0); + if ( surface == NULL ) { + error = "Out of memory"; + goto done; + } + + /* Load the image data */ + for ( pixels = (Uint8 *)surface->pixels; h > 0; --h ) { + if ( SDL_RWread(src, pixels, w, 1) <= 0 ) { + error = "Couldn't read image data"; + goto done; + } + pixels += surface->pitch; + } + +done: + if ( error ) { + SDL_RWseek(src, start, RW_SEEK_SET); + if ( surface ) { + SDL_FreeSurface(surface); + surface = NULL; + } + IMG_SetError(error); + } + return surface; +} + +#else + +/* See if an image is contained in a data source */ +int IMG_isXV(SDL_RWops *src) +{ + return(0); +} + +/* Load a XXX type image from an SDL datasource */ +SDL_Surface *IMG_LoadXV_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_XV */ diff --git a/src/SDL2/IMG_xxx.c b/src/SDL2/IMG_xxx.c new file mode 100644 index 000000000..507950ff2 --- /dev/null +++ b/src/SDL2/IMG_xxx.c @@ -0,0 +1,87 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* This is a generic "format not supported" image framework */ + +#include + +#include "SDL_image.h" + +#ifdef LOAD_XXX + +/* See if an image is contained in a data source */ +int IMG_isXXX(SDL_RWops *src) +{ + int start; + int is_XXX; + + if ( !src ) + return 0; + start = SDL_RWtell(src); + is_XXX = 0; + + /* Detect the image here */ + + SDL_RWseek(src, start, RW_SEEK_SET); + return(is_XXX); +} + +/* Load a XXX type image from an SDL datasource */ +SDL_Surface *IMG_LoadXXX_RW(SDL_RWops *src) +{ + int start; + const char *error = NULL; + SDL_Surface *surface = NULL; + + if ( !src ) { + /* The error message has been set in SDL_RWFromFile */ + return NULL; + } + start = SDL_RWtell(src); + + /* Load the image here */ + + if ( error ) { + SDL_RWseek(src, start, RW_SEEK_SET); + if ( surface ) { + SDL_FreeSurface(surface); + surface = NULL; + } + IMG_SetError(error); + } + return surface; +} + +#else + +/* See if an image is contained in a data source */ +int IMG_isXXX(SDL_RWops *src) +{ + return(0); +} + +/* Load a XXX type image from an SDL datasource */ +SDL_Surface *IMG_LoadXXX_RW(SDL_RWops *src) +{ + return(NULL); +} + +#endif /* LOAD_XXX */ diff --git a/src/SDL2/Makefile.am b/src/SDL2/Makefile.am new file mode 100644 index 000000000..d4b6e6cce --- /dev/null +++ b/src/SDL2/Makefile.am @@ -0,0 +1,78 @@ +# Makefile.am for the SDL sample image loading library and viewer + +lib_LTLIBRARIES = libSDL2_image.la + +libSDL2_imageincludedir = $(includedir)/SDL2 +libSDL2_imageinclude_HEADERS = \ + SDL_image.h + +if USE_IMAGEIO +IMAGEIO_SOURCE = IMG_ImageIO.m +endif + +libSDL2_image_la_SOURCES = \ + IMG.c \ + IMG_bmp.c \ + IMG_gif.c \ + IMG_jpg.c \ + IMG_lbm.c \ + IMG_pcx.c \ + IMG_png.c \ + IMG_pnm.c \ + IMG_tga.c \ + IMG_tif.c \ + IMG_xcf.c \ + IMG_xpm.c \ + IMG_xv.c \ + IMG_webp.c \ + $(IMAGEIO_SOURCE) \ + miniz.h + +EXTRA_DIST = \ + Android.mk \ + debian \ + external \ + version.rc \ + VisualC \ + VisualCE \ + Xcode \ + Xcode-iOS \ + IMG_xxx.c \ + $(srcdir)/*.m \ + SDL2_image.spec \ + gcc-fat.sh \ + autogen.sh \ + $(srcdir)/*.txt + +if USE_VERSION_RC +libSDL2_image_la_LDFLAGS = \ + -no-undefined \ + -release $(LT_RELEASE) \ + -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) -Wl,version.o +libSDL2_image_la_LIBADD = $(IMG_LIBS) +libSDL2_image_la_DEPENDENCIES = version.o +else +libSDL2_image_la_LDFLAGS = \ + -no-undefined \ + -release $(LT_RELEASE) \ + -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) +libSDL2_image_la_LIBADD = $(IMG_LIBS) +endif + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = SDL2_image.pc + +%.o : %.rc + $(WINDRES) $< $@ + +noinst_PROGRAMS = showimage + +showimage_LDADD = libSDL2_image.la + +# Rule to build tar-gzipped distribution package +$(PACKAGE)-$(VERSION).tar.gz: distcheck + +# Rule to build RPM distribution package +rpm: $(PACKAGE)-$(VERSION).tar.gz + rpmbuild -ta $(PACKAGE)-$(VERSION).tar.gz + diff --git a/src/SDL2/Makefile.in b/src/SDL2/Makefile.in new file mode 100644 index 000000000..78246d996 --- /dev/null +++ b/src/SDL2/Makefile.in @@ -0,0 +1,998 @@ +# Makefile.in generated by automake 1.13.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Makefile.am for the SDL sample image loading library and viewer + + + + +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@USE_VERSION_RC_FALSE@libSDL2_image_la_DEPENDENCIES = \ +@USE_VERSION_RC_FALSE@ $(am__DEPENDENCIES_1) +noinst_PROGRAMS = showimage$(EXEEXT) +subdir = . +DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(top_srcdir)/configure $(am__configure_deps) \ + $(srcdir)/SDL2_image.spec.in $(srcdir)/SDL2_image.pc.in \ + depcomp $(libSDL2_imageinclude_HEADERS) config.guess \ + config.sub install-sh missing ltmain.sh +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude/libtool.m4 \ + $(top_srcdir)/acinclude/ltoptions.m4 \ + $(top_srcdir)/acinclude/ltsugar.m4 \ + $(top_srcdir)/acinclude/ltversion.m4 \ + $(top_srcdir)/acinclude/lt~obsolete.m4 \ + $(top_srcdir)/acinclude/pkg.m4 $(top_srcdir)/acinclude/sdl2.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_CLEAN_FILES = SDL2_image.spec SDL2_image.pc +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" \ + "$(DESTDIR)$(libSDL2_imageincludedir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +am__DEPENDENCIES_1 = +am__libSDL2_image_la_SOURCES_DIST = IMG.c IMG_bmp.c IMG_gif.c \ + IMG_jpg.c IMG_lbm.c IMG_pcx.c IMG_png.c IMG_pnm.c IMG_tga.c \ + IMG_tif.c IMG_xcf.c IMG_xpm.c IMG_xv.c IMG_webp.c \ + IMG_ImageIO.m miniz.h +@USE_IMAGEIO_TRUE@am__objects_1 = IMG_ImageIO.lo +am_libSDL2_image_la_OBJECTS = IMG.lo IMG_bmp.lo IMG_gif.lo IMG_jpg.lo \ + IMG_lbm.lo IMG_pcx.lo IMG_png.lo IMG_pnm.lo IMG_tga.lo \ + IMG_tif.lo IMG_xcf.lo IMG_xpm.lo IMG_xv.lo IMG_webp.lo \ + $(am__objects_1) +libSDL2_image_la_OBJECTS = $(am_libSDL2_image_la_OBJECTS) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +libSDL2_image_la_LINK = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(OBJCLD) $(AM_OBJCFLAGS) \ + $(OBJCFLAGS) $(libSDL2_image_la_LDFLAGS) $(LDFLAGS) -o $@ +PROGRAMS = $(noinst_PROGRAMS) +showimage_SOURCES = showimage.c +showimage_OBJECTS = showimage.$(OBJEXT) +showimage_DEPENDENCIES = libSDL2_image.la +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +OBJCCOMPILE = $(OBJC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_OBJCFLAGS) $(OBJCFLAGS) +LTOBJCCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(OBJC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_OBJCFLAGS) $(OBJCFLAGS) +AM_V_OBJC = $(am__v_OBJC_@AM_V@) +am__v_OBJC_ = $(am__v_OBJC_@AM_DEFAULT_V@) +am__v_OBJC_0 = @echo " OBJC " $@; +am__v_OBJC_1 = +OBJCLD = $(OBJC) +OBJCLINK = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=link $(OBJCLD) $(AM_OBJCFLAGS) $(OBJCFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_OBJCLD = $(am__v_OBJCLD_@AM_V@) +am__v_OBJCLD_ = $(am__v_OBJCLD_@AM_DEFAULT_V@) +am__v_OBJCLD_0 = @echo " OBJCLD " $@; +am__v_OBJCLD_1 = +SOURCES = $(libSDL2_image_la_SOURCES) showimage.c +DIST_SOURCES = $(am__libSDL2_image_la_SOURCES_DIST) showimage.c +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +DATA = $(pkgconfig_DATA) +HEADERS = $(libSDL2_imageinclude_HEADERS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +AM_RECURSIVE_TARGETS = cscope +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +DIST_TARGETS = dist-gzip +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BINARY_AGE = @BINARY_AGE@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +IMG_LIBS = @IMG_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTERFACE_AGE = @INTERFACE_AGE@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBPNG_CFLAGS = @LIBPNG_CFLAGS@ +LIBPNG_LIBS = @LIBPNG_LIBS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIBWEBP_CFLAGS = @LIBWEBP_CFLAGS@ +LIBWEBP_LIBS = @LIBWEBP_LIBS@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_AGE = @LT_AGE@ +LT_CURRENT = @LT_CURRENT@ +LT_RELEASE = @LT_RELEASE@ +LT_REVISION = @LT_REVISION@ +MAJOR_VERSION = @MAJOR_VERSION@ +MAKEINFO = @MAKEINFO@ +MICRO_VERSION = @MICRO_VERSION@ +MINOR_VERSION = @MINOR_VERSION@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJC = @OBJC@ +OBJCDEPMODE = @OBJCDEPMODE@ +OBJCFLAGS = @OBJCFLAGS@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +RANLIB = @RANLIB@ +SDL2_CONFIG = @SDL2_CONFIG@ +SDL_CFLAGS = @SDL_CFLAGS@ +SDL_LIBS = @SDL_LIBS@ +SDL_VERSION = @SDL_VERSION@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +WINDRES = @WINDRES@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +ac_ct_OBJC = @ac_ct_OBJC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +lib_LTLIBRARIES = libSDL2_image.la +libSDL2_imageincludedir = $(includedir)/SDL2 +libSDL2_imageinclude_HEADERS = \ + SDL_image.h + +@USE_IMAGEIO_TRUE@IMAGEIO_SOURCE = IMG_ImageIO.m +libSDL2_image_la_SOURCES = \ + IMG.c \ + IMG_bmp.c \ + IMG_gif.c \ + IMG_jpg.c \ + IMG_lbm.c \ + IMG_pcx.c \ + IMG_png.c \ + IMG_pnm.c \ + IMG_tga.c \ + IMG_tif.c \ + IMG_xcf.c \ + IMG_xpm.c \ + IMG_xv.c \ + IMG_webp.c \ + $(IMAGEIO_SOURCE) \ + miniz.h + +EXTRA_DIST = \ + Android.mk \ + debian \ + external \ + version.rc \ + VisualC \ + VisualCE \ + Xcode \ + Xcode-iOS \ + IMG_xxx.c \ + $(srcdir)/*.m \ + SDL2_image.spec \ + gcc-fat.sh \ + autogen.sh \ + $(srcdir)/*.txt + +@USE_VERSION_RC_FALSE@libSDL2_image_la_LDFLAGS = \ +@USE_VERSION_RC_FALSE@ -no-undefined \ +@USE_VERSION_RC_FALSE@ -release $(LT_RELEASE) \ +@USE_VERSION_RC_FALSE@ -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) + +@USE_VERSION_RC_TRUE@libSDL2_image_la_LDFLAGS = \ +@USE_VERSION_RC_TRUE@ -no-undefined \ +@USE_VERSION_RC_TRUE@ -release $(LT_RELEASE) \ +@USE_VERSION_RC_TRUE@ -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) -Wl,version.o + +@USE_VERSION_RC_FALSE@libSDL2_image_la_LIBADD = $(IMG_LIBS) +@USE_VERSION_RC_TRUE@libSDL2_image_la_LIBADD = $(IMG_LIBS) +@USE_VERSION_RC_TRUE@libSDL2_image_la_DEPENDENCIES = version.o +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = SDL2_image.pc +showimage_LDADD = libSDL2_image.la +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .m .o .obj +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): +SDL2_image.spec: $(top_builddir)/config.status $(srcdir)/SDL2_image.spec.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +SDL2_image.pc: $(top_builddir)/config.status $(srcdir)/SDL2_image.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } +libSDL2_image.la: $(libSDL2_image_la_OBJECTS) $(libSDL2_image_la_DEPENDENCIES) $(EXTRA_libSDL2_image_la_DEPENDENCIES) + $(AM_V_OBJCLD)$(libSDL2_image_la_LINK) -rpath $(libdir) $(libSDL2_image_la_OBJECTS) $(libSDL2_image_la_LIBADD) $(LIBS) + +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +showimage$(EXEEXT): $(showimage_OBJECTS) $(showimage_DEPENDENCIES) $(EXTRA_showimage_DEPENDENCIES) + @rm -f showimage$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(showimage_OBJECTS) $(showimage_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_ImageIO.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_bmp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_gif.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_jpg.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_lbm.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_pcx.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_png.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_pnm.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_tga.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_tif.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_webp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_xcf.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_xpm.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/IMG_xv.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/showimage.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +.m.o: +@am__fastdepOBJC_TRUE@ $(AM_V_OBJC)$(OBJCCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepOBJC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepOBJC_FALSE@ $(AM_V_OBJC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepOBJC_FALSE@ DEPDIR=$(DEPDIR) $(OBJCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepOBJC_FALSE@ $(AM_V_OBJC@am__nodep@)$(OBJCCOMPILE) -c -o $@ $< + +.m.obj: +@am__fastdepOBJC_TRUE@ $(AM_V_OBJC)$(OBJCCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepOBJC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepOBJC_FALSE@ $(AM_V_OBJC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepOBJC_FALSE@ DEPDIR=$(DEPDIR) $(OBJCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepOBJC_FALSE@ $(AM_V_OBJC@am__nodep@)$(OBJCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.m.lo: +@am__fastdepOBJC_TRUE@ $(AM_V_OBJC)$(LTOBJCCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepOBJC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepOBJC_FALSE@ $(AM_V_OBJC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepOBJC_FALSE@ DEPDIR=$(DEPDIR) $(OBJCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepOBJC_FALSE@ $(AM_V_OBJC@am__nodep@)$(LTOBJCCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt +install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + done + +uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) +install-libSDL2_imageincludeHEADERS: $(libSDL2_imageinclude_HEADERS) + @$(NORMAL_INSTALL) + @list='$(libSDL2_imageinclude_HEADERS)'; test -n "$(libSDL2_imageincludedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(libSDL2_imageincludedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libSDL2_imageincludedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libSDL2_imageincludedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(libSDL2_imageincludedir)" || exit $$?; \ + done + +uninstall-libSDL2_imageincludeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(libSDL2_imageinclude_HEADERS)'; test -n "$(libSDL2_imageincludedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(libSDL2_imageincludedir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__post_remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-am +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(DATA) $(HEADERS) +installdirs: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(libSDL2_imageincludedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ + clean-noinstPROGRAMS mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-libtool distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-libSDL2_imageincludeHEADERS \ + install-pkgconfigDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-libLTLIBRARIES \ + uninstall-libSDL2_imageincludeHEADERS uninstall-pkgconfigDATA + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \ + clean-cscope clean-generic clean-libLTLIBRARIES clean-libtool \ + clean-noinstPROGRAMS cscope cscopelist-am ctags ctags-am dist \ + dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ + dist-xz dist-zip distcheck distclean distclean-compile \ + distclean-generic distclean-libtool distclean-tags \ + distcleancheck distdir distuninstallcheck dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-libLTLIBRARIES \ + install-libSDL2_imageincludeHEADERS install-man install-pdf \ + install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \ + uninstall-libLTLIBRARIES uninstall-libSDL2_imageincludeHEADERS \ + uninstall-pkgconfigDATA + + +%.o : %.rc + $(WINDRES) $< $@ + +# Rule to build tar-gzipped distribution package +$(PACKAGE)-$(VERSION).tar.gz: distcheck + +# Rule to build RPM distribution package +rpm: $(PACKAGE)-$(VERSION).tar.gz + rpmbuild -ta $(PACKAGE)-$(VERSION).tar.gz + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/SDL2/README.txt b/src/SDL2/README.txt new file mode 100644 index 000000000..5e9b5d0b8 --- /dev/null +++ b/src/SDL2/README.txt @@ -0,0 +1,40 @@ + +SDL_image 2.0 + +The latest version of this library is available from: +http://www.libsdl.org/projects/SDL_image/ + +This is a simple library to load images of various formats as SDL surfaces. +This library supports BMP, PNM (PPM/PGM/PBM), XPM, LBM, PCX, GIF, JPEG, PNG, +TGA, and TIFF formats. + +API: +#include "SDL_image.h" + + SDL_Surface *IMG_Load(const char *file); +or + SDL_Surface *IMG_Load_RW(SDL_RWops *src, int freesrc); +or + SDL_Surface *IMG_LoadTyped_RW(SDL_RWops *src, int freesrc, char *type); + +where type is a string specifying the format (i.e. "PNG" or "pcx"). +Note that IMG_Load_RW cannot load TGA images. + +To create a surface from an XPM image included in C source, use: + + SDL_Surface *IMG_ReadXPMFromArray(char **xpm); + +An example program 'showimage' is included, with source in showimage.c + +JPEG support requires the JPEG library: http://www.ijg.org/ +PNG support requires the PNG library: http://www.libpng.org/pub/png/libpng.html + and the Zlib library: http://www.gzip.org/zlib/ +TIFF support requires the TIFF library: ftp://ftp.sgi.com/graphics/tiff/ + +If you have these libraries installed in non-standard places, you can +try adding those paths to the configure script, e.g. +sh ./configure CPPFLAGS="-I/somewhere/include" LDFLAGS="-L/somewhere/lib" +If this works, you may need to add /somewhere/lib to your LD_LIBRARY_PATH +so shared library loading works correctly. + +This library is under the zlib License, see the file "COPYING.txt" for details. diff --git a/src/SDL2/SDL.h b/src/SDL2/SDL.h new file mode 100644 index 000000000..f2d760c2e --- /dev/null +++ b/src/SDL2/SDL.h @@ -0,0 +1,160 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL.h + * + * Main include header for the SDL library + */ + +/** + * \mainpage Simple DirectMedia Layer (SDL) + * + * http://www.libsdl.org/ + * + * \section intro_sec Introduction + * + * This is the Simple DirectMedia Layer, a general API that provides low + * level access to audio, keyboard, mouse, joystick, 3D hardware via OpenGL, + * and 2D framebuffer across multiple platforms. + * + * SDL is written in C, but works with C++ natively, and has bindings to + * several other languages, including Ada, C#, Eiffel, Erlang, Euphoria, + * Guile, Haskell, Java, Lisp, Lua, ML, Objective C, Pascal, Perl, PHP, + * Pike, Pliant, Python, Ruby, and Smalltalk. + * + * This library is distributed under the zlib license, which can be + * found in the file "COPYING". This license allows you to use SDL + * freely for any purpose as long as you retain the copyright notice. + * + * The best way to learn how to use SDL is to check out the header files in + * the "include" subdirectory and the programs in the "test" subdirectory. + * The header files and test programs are well commented and always up to date. + * More documentation and FAQs are available online at: + * http://wiki.libsdl.org/ + * + * If you need help with the library, or just want to discuss SDL related + * issues, you can join the developers mailing list: + * http://www.libsdl.org/mailing-list.php + * + * Enjoy! + * Sam Lantinga (slouken@libsdl.org) + */ + +#ifndef _SDL_H +#define _SDL_H + +#include "SDL_main.h" +#include "SDL_stdinc.h" +#include "SDL_assert.h" +#include "SDL_atomic.h" +#include "SDL_audio.h" +#include "SDL_clipboard.h" +#include "SDL_cpuinfo.h" +#include "SDL_endian.h" +#include "SDL_error.h" +#include "SDL_events.h" +#include "SDL_joystick.h" +#include "SDL_gamecontroller.h" +#include "SDL_haptic.h" +#include "SDL_hints.h" +#include "SDL_loadso.h" +#include "SDL_log.h" +#include "SDL_messagebox.h" +#include "SDL_mutex.h" +#include "SDL_power.h" +#include "SDL_render.h" +#include "SDL_rwops.h" +#include "SDL_system.h" +#include "SDL_thread.h" +#include "SDL_timer.h" +#include "SDL_version.h" +#include "SDL_video.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* As of version 0.5, SDL is loaded dynamically into the application */ + +/** + * \name SDL_INIT_* + * + * These are the flags which may be passed to SDL_Init(). You should + * specify the subsystems which you will be using in your application. + */ +/*@{*/ +#define SDL_INIT_TIMER 0x00000001 +#define SDL_INIT_AUDIO 0x00000010 +#define SDL_INIT_VIDEO 0x00000020 /**< SDL_INIT_VIDEO implies SDL_INIT_EVENTS */ +#define SDL_INIT_JOYSTICK 0x00000200 /**< SDL_INIT_JOYSTICK implies SDL_INIT_EVENTS */ +#define SDL_INIT_HAPTIC 0x00001000 +#define SDL_INIT_GAMECONTROLLER 0x00002000 /**< SDL_INIT_GAMECONTROLLER implies SDL_INIT_JOYSTICK */ +#define SDL_INIT_EVENTS 0x00004000 +#define SDL_INIT_NOPARACHUTE 0x00100000 /**< Don't catch fatal signals */ +#define SDL_INIT_EVERYTHING ( \ + SDL_INIT_TIMER | SDL_INIT_AUDIO | SDL_INIT_VIDEO | SDL_INIT_EVENTS | \ + SDL_INIT_JOYSTICK | SDL_INIT_HAPTIC | SDL_INIT_GAMECONTROLLER \ + ) +/*@}*/ + +/** + * This function initializes the subsystems specified by \c flags + * Unless the ::SDL_INIT_NOPARACHUTE flag is set, it will install cleanup + * signal handlers for some commonly ignored fatal signals (like SIGSEGV). + */ +extern DECLSPEC int SDLCALL SDL_Init(Uint32 flags); + +/** + * This function initializes specific SDL subsystems + */ +extern DECLSPEC int SDLCALL SDL_InitSubSystem(Uint32 flags); + +/** + * This function cleans up specific SDL subsystems + */ +extern DECLSPEC void SDLCALL SDL_QuitSubSystem(Uint32 flags); + +/** + * This function returns a mask of the specified subsystems which have + * previously been initialized. + * + * If \c flags is 0, it returns a mask of all initialized subsystems. + */ +extern DECLSPEC Uint32 SDLCALL SDL_WasInit(Uint32 flags); + +/** + * This function cleans up all initialized subsystems. You should + * call it upon all exit conditions. + */ +extern DECLSPEC void SDLCALL SDL_Quit(void); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_H */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL2_image.pc.in b/src/SDL2/SDL2_image.pc.in new file mode 100644 index 000000000..1b841eb8c --- /dev/null +++ b/src/SDL2/SDL2_image.pc.in @@ -0,0 +1,12 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: @PACKAGE@ +Description: image loading library for Simple DirectMedia Layer +Version: @VERSION@ +Requires: sdl2 >= @SDL_VERSION@ +Libs: -L${libdir} -lSDL2_image +Cflags: -I${includedir}/SDL2 + diff --git a/src/SDL2/SDL2_image.spec b/src/SDL2/SDL2_image.spec new file mode 100644 index 000000000..08289d0bf --- /dev/null +++ b/src/SDL2/SDL2_image.spec @@ -0,0 +1,69 @@ +%define name SDL2_image +%define version 2.0.0 +%define release 1 + +Summary: Simple DirectMedia Layer - Sample Image Loading Library +Name: %{name} +Version: %{version} +Release: %{release} +Source0: %{name}-%{version}.tar.gz +License: LGPL +Group: System Environment/Libraries +BuildRoot: /var/tmp/%{name}-buildroot +Prefix: %{_prefix} +Packager: Hakan Tandogan +#BuildRequires: SDL2-devel +#BuildRequires: libjpeg-devel +#BuildRequires: libpng-devel +#BuildRequires: libtiff-devel + +%description +This is a simple library to load images of various formats as SDL surfaces. +This library supports BMP, PPM, PCX, GIF, JPEG, PNG, and TIFF formats. + +%package devel +Summary: Libraries, includes and more to develop SDL applications. +Group: Development/Libraries +Requires: %{name} +Requires: SDL2-devel + +%description devel +This is a simple library to load images of various formats as SDL surfaces. +This library supports BMP, PPM, PCX, GIF, JPEG, PNG, and TIFF formats. + +%prep +rm -rf ${RPM_BUILD_ROOT} + +%setup + +%build +CFLAGS="$RPM_OPT_FLAGS" ./configure --prefix=%{prefix} +make + +%install +rm -rf $RPM_BUILD_ROOT +make install prefix=$RPM_BUILD_ROOT/%{prefix} + +%clean +rm -rf $RPM_BUILD_ROOT + +%files +%defattr(-,root,root) +%doc README.txt CHANGES.txt COPYING.txt +%{prefix}/lib/lib*.so.* + +%files devel +%defattr(-,root,root) +%{prefix}/lib/lib*.a +%{prefix}/lib/lib*.la +%{prefix}/lib/lib*.so +%{prefix}/include/*/ +%{prefix}/lib/pkgconfig/*.pc + +%changelog +* Wed Jan 19 2000 Sam Lantinga +- converted to get package information from configure +* Tue Jan 18 2000 Hakan Tandogan +- initial spec file + + diff --git a/src/SDL2/SDL2_image.spec.in b/src/SDL2/SDL2_image.spec.in new file mode 100644 index 000000000..cfa676218 --- /dev/null +++ b/src/SDL2/SDL2_image.spec.in @@ -0,0 +1,69 @@ +%define name @PACKAGE@ +%define version @VERSION@ +%define release 1 + +Summary: Simple DirectMedia Layer - Sample Image Loading Library +Name: %{name} +Version: %{version} +Release: %{release} +Source0: %{name}-%{version}.tar.gz +License: LGPL +Group: System Environment/Libraries +BuildRoot: /var/tmp/%{name}-buildroot +Prefix: %{_prefix} +Packager: Hakan Tandogan +#BuildRequires: SDL2-devel +#BuildRequires: libjpeg-devel +#BuildRequires: libpng-devel +#BuildRequires: libtiff-devel + +%description +This is a simple library to load images of various formats as SDL surfaces. +This library supports BMP, PPM, PCX, GIF, JPEG, PNG, and TIFF formats. + +%package devel +Summary: Libraries, includes and more to develop SDL applications. +Group: Development/Libraries +Requires: %{name} +Requires: SDL2-devel + +%description devel +This is a simple library to load images of various formats as SDL surfaces. +This library supports BMP, PPM, PCX, GIF, JPEG, PNG, and TIFF formats. + +%prep +rm -rf ${RPM_BUILD_ROOT} + +%setup + +%build +CFLAGS="$RPM_OPT_FLAGS" ./configure --prefix=%{prefix} +make + +%install +rm -rf $RPM_BUILD_ROOT +make install prefix=$RPM_BUILD_ROOT/%{prefix} + +%clean +rm -rf $RPM_BUILD_ROOT + +%files +%defattr(-,root,root) +%doc README.txt CHANGES.txt COPYING.txt +%{prefix}/lib/lib*.so.* + +%files devel +%defattr(-,root,root) +%{prefix}/lib/lib*.a +%{prefix}/lib/lib*.la +%{prefix}/lib/lib*.so +%{prefix}/include/*/ +%{prefix}/lib/pkgconfig/*.pc + +%changelog +* Wed Jan 19 2000 Sam Lantinga +- converted to get package information from configure +* Tue Jan 18 2000 Hakan Tandogan +- initial spec file + + diff --git a/src/SDL2/SDL_assert.h b/src/SDL2/SDL_assert.h new file mode 100644 index 000000000..5a6afc5e2 --- /dev/null +++ b/src/SDL2/SDL_assert.h @@ -0,0 +1,237 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef _SDL_assert_h +#define _SDL_assert_h + +#include "SDL_config.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef SDL_ASSERT_LEVEL +#ifdef SDL_DEFAULT_ASSERT_LEVEL +#define SDL_ASSERT_LEVEL SDL_DEFAULT_ASSERT_LEVEL +#elif defined(_DEBUG) || defined(DEBUG) || \ + (defined(__GNUC__) && !defined(__OPTIMIZE__)) +#define SDL_ASSERT_LEVEL 2 +#else +#define SDL_ASSERT_LEVEL 1 +#endif +#endif /* SDL_ASSERT_LEVEL */ + +/* +These are macros and not first class functions so that the debugger breaks +on the assertion line and not in some random guts of SDL, and so each +assert can have unique static variables associated with it. +*/ + +#if defined(_MSC_VER) +/* Don't include intrin.h here because it contains C++ code */ + extern void __cdecl __debugbreak(void); + #define SDL_TriggerBreakpoint() __debugbreak() +#elif (defined(__GNUC__) && (defined(__i386__) || defined(__x86_64__))) + #define SDL_TriggerBreakpoint() __asm__ __volatile__ ( "int $3\n\t" ) +#elif defined(HAVE_SIGNAL_H) + #include + #define SDL_TriggerBreakpoint() raise(SIGTRAP) +#else + /* How do we trigger breakpoints on this platform? */ + #define SDL_TriggerBreakpoint() +#endif + +#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 supports __func__ as a standard. */ +# define SDL_FUNCTION __func__ +#elif ((__GNUC__ >= 2) || defined(_MSC_VER)) +# define SDL_FUNCTION __FUNCTION__ +#else +# define SDL_FUNCTION "???" +#endif +#define SDL_FILE __FILE__ +#define SDL_LINE __LINE__ + +/* +sizeof (x) makes the compiler still parse the expression even without +assertions enabled, so the code is always checked at compile time, but +doesn't actually generate code for it, so there are no side effects or +expensive checks at run time, just the constant size of what x WOULD be, +which presumably gets optimized out as unused. +This also solves the problem of... + + int somevalue = blah(); + SDL_assert(somevalue == 1); + +...which would cause compiles to complain that somevalue is unused if we +disable assertions. +*/ + +#define SDL_disabled_assert(condition) \ + do { (void) sizeof ((condition)); } while (0) + +typedef enum +{ + SDL_ASSERTION_RETRY, /**< Retry the assert immediately. */ + SDL_ASSERTION_BREAK, /**< Make the debugger trigger a breakpoint. */ + SDL_ASSERTION_ABORT, /**< Terminate the program. */ + SDL_ASSERTION_IGNORE, /**< Ignore the assert. */ + SDL_ASSERTION_ALWAYS_IGNORE /**< Ignore the assert from now on. */ +} SDL_assert_state; + +typedef struct SDL_assert_data +{ + int always_ignore; + unsigned int trigger_count; + const char *condition; + const char *filename; + int linenum; + const char *function; + const struct SDL_assert_data *next; +} SDL_assert_data; + +#if (SDL_ASSERT_LEVEL > 0) + +/* Never call this directly. Use the SDL_assert* macros. */ +extern DECLSPEC SDL_assert_state SDLCALL SDL_ReportAssertion(SDL_assert_data *, + const char *, + const char *, int); + +/* the do {} while(0) avoids dangling else problems: + if (x) SDL_assert(y); else blah(); + ... without the do/while, the "else" could attach to this macro's "if". + We try to handle just the minimum we need here in a macro...the loop, + the static vars, and break points. The heavy lifting is handled in + SDL_ReportAssertion(), in SDL_assert.c. +*/ +#define SDL_enabled_assert(condition) \ + do { \ + while ( !(condition) ) { \ + static struct SDL_assert_data assert_data = { \ + 0, 0, #condition, 0, 0, 0, 0 \ + }; \ + const SDL_assert_state state = SDL_ReportAssertion(&assert_data, \ + SDL_FUNCTION, \ + SDL_FILE, \ + SDL_LINE); \ + if (state == SDL_ASSERTION_RETRY) { \ + continue; /* go again. */ \ + } else if (state == SDL_ASSERTION_BREAK) { \ + SDL_TriggerBreakpoint(); \ + } \ + break; /* not retrying. */ \ + } \ + } while (0) + +#endif /* enabled assertions support code */ + +/* Enable various levels of assertions. */ +#if SDL_ASSERT_LEVEL == 0 /* assertions disabled */ +# define SDL_assert(condition) SDL_disabled_assert(condition) +# define SDL_assert_release(condition) SDL_disabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_disabled_assert(condition) +#elif SDL_ASSERT_LEVEL == 1 /* release settings. */ +# define SDL_assert(condition) SDL_disabled_assert(condition) +# define SDL_assert_release(condition) SDL_enabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_disabled_assert(condition) +#elif SDL_ASSERT_LEVEL == 2 /* normal settings. */ +# define SDL_assert(condition) SDL_enabled_assert(condition) +# define SDL_assert_release(condition) SDL_enabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_disabled_assert(condition) +#elif SDL_ASSERT_LEVEL == 3 /* paranoid settings. */ +# define SDL_assert(condition) SDL_enabled_assert(condition) +# define SDL_assert_release(condition) SDL_enabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_enabled_assert(condition) +#else +# error Unknown assertion level. +#endif + + +typedef SDL_assert_state (SDLCALL *SDL_AssertionHandler)( + const SDL_assert_data* data, void* userdata); + +/** + * \brief Set an application-defined assertion handler. + * + * This allows an app to show its own assertion UI and/or force the + * response to an assertion failure. If the app doesn't provide this, SDL + * will try to do the right thing, popping up a system-specific GUI dialog, + * and probably minimizing any fullscreen windows. + * + * This callback may fire from any thread, but it runs wrapped in a mutex, so + * it will only fire from one thread at a time. + * + * Setting the callback to NULL restores SDL's original internal handler. + * + * This callback is NOT reset to SDL's internal handler upon SDL_Quit()! + * + * \return SDL_assert_state value of how to handle the assertion failure. + * + * \param handler Callback function, called when an assertion fails. + * \param userdata A pointer passed to the callback as-is. + */ +extern DECLSPEC void SDLCALL SDL_SetAssertionHandler( + SDL_AssertionHandler handler, + void *userdata); + +/** + * \brief Get a list of all assertion failures. + * + * Get all assertions triggered since last call to SDL_ResetAssertionReport(), + * or the start of the program. + * + * The proper way to examine this data looks something like this: + * + * + * const SDL_assert_data *item = SDL_GetAssertionReport(); + * while (item) { + * printf("'%s', %s (%s:%d), triggered %u times, always ignore: %s.\n", + * item->condition, item->function, item->filename, + * item->linenum, item->trigger_count, + * item->always_ignore ? "yes" : "no"); + * item = item->next; + * } + * + * + * \return List of all assertions. + * \sa SDL_ResetAssertionReport + */ +extern DECLSPEC const SDL_assert_data * SDLCALL SDL_GetAssertionReport(void); + +/** + * \brief Reset the list of all assertion failures. + * + * Reset list of all assertions triggered. + * + * \sa SDL_GetAssertionReport + */ +extern DECLSPEC void SDLCALL SDL_ResetAssertionReport(void); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_assert_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_atomic.h b/src/SDL2/SDL_atomic.h new file mode 100644 index 000000000..7bd669d1a --- /dev/null +++ b/src/SDL2/SDL_atomic.h @@ -0,0 +1,359 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_atomic.h + * + * Atomic operations. + * + * IMPORTANT: + * If you are not an expert in concurrent lockless programming, you should + * only be using the atomic lock and reference counting functions in this + * file. In all other cases you should be protecting your data structures + * with full mutexes. + * + * The list of "safe" functions to use are: + * SDL_AtomicLock() + * SDL_AtomicUnlock() + * SDL_AtomicIncRef() + * SDL_AtomicDecRef() + * + * Seriously, here be dragons! + * ^^^^^^^^^^^^^^^^^^^^^^^^^^^ + * + * You can find out a little more about lockless programming and the + * subtle issues that can arise here: + * http://msdn.microsoft.com/en-us/library/ee418650%28v=vs.85%29.aspx + * + * There's also lots of good information here: + * http://www.1024cores.net/home/lock-free-algorithms + * http://preshing.com/ + * + * These operations may or may not actually be implemented using + * processor specific atomic operations. When possible they are + * implemented as true processor specific atomic operations. When that + * is not possible the are implemented using locks that *do* use the + * available atomic operations. + * + * All of the atomic operations that modify memory are full memory barriers. + */ + +#ifndef _SDL_atomic_h_ +#define _SDL_atomic_h_ + +#include "SDL_stdinc.h" +#include "SDL_platform.h" + +#include "begin_code.h" + +/* Need to do this here because intrin.h has C++ code in it */ +/* Visual Studio 2005 has a bug where intrin.h conflicts with winnt.h */ +#if defined(_MSC_VER) && (_MSC_VER >= 1500) +#include +#define HAVE_MSC_ATOMICS 1 +#endif + +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \name SDL AtomicLock + * + * The atomic locks are efficient spinlocks using CPU instructions, + * but are vulnerable to starvation and can spin forever if a thread + * holding a lock has been terminated. For this reason you should + * minimize the code executed inside an atomic lock and never do + * expensive things like API or system calls while holding them. + * + * The atomic locks are not safe to lock recursively. + * + * Porting Note: + * The spin lock functions and type are required and can not be + * emulated because they are used in the atomic emulation code. + */ +/*@{*/ + +typedef int SDL_SpinLock; + +/** + * \brief Try to lock a spin lock by setting it to a non-zero value. + * + * \param lock Points to the lock. + * + * \return SDL_TRUE if the lock succeeded, SDL_FALSE if the lock is already held. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_AtomicTryLock(SDL_SpinLock *lock); + +/** + * \brief Lock a spin lock by setting it to a non-zero value. + * + * \param lock Points to the lock. + */ +extern DECLSPEC void SDLCALL SDL_AtomicLock(SDL_SpinLock *lock); + +/** + * \brief Unlock a spin lock by setting it to 0. Always returns immediately + * + * \param lock Points to the lock. + */ +extern DECLSPEC void SDLCALL SDL_AtomicUnlock(SDL_SpinLock *lock); + +/*@}*//*SDL AtomicLock*/ + + +/** + * The compiler barrier prevents the compiler from reordering + * reads and writes to globally visible variables across the call. + */ +#if defined(_MSC_VER) && (_MSC_VER > 1200) +void _ReadWriteBarrier(void); +#pragma intrinsic(_ReadWriteBarrier) +#define SDL_CompilerBarrier() _ReadWriteBarrier() +#elif defined(__GNUC__) +#define SDL_CompilerBarrier() __asm__ __volatile__ ("" : : : "memory") +#else +#define SDL_CompilerBarrier() \ +{ SDL_SpinLock _tmp = 0; SDL_AtomicLock(&_tmp); SDL_AtomicUnlock(&_tmp); } +#endif + +/** + * Memory barriers are designed to prevent reads and writes from being + * reordered by the compiler and being seen out of order on multi-core CPUs. + * + * A typical pattern would be for thread A to write some data and a flag, + * and for thread B to read the flag and get the data. In this case you + * would insert a release barrier between writing the data and the flag, + * guaranteeing that the data write completes no later than the flag is + * written, and you would insert an acquire barrier between reading the + * flag and reading the data, to ensure that all the reads associated + * with the flag have completed. + * + * In this pattern you should always see a release barrier paired with + * an acquire barrier and you should gate the data reads/writes with a + * single flag variable. + * + * For more information on these semantics, take a look at the blog post: + * http://preshing.com/20120913/acquire-and-release-semantics + */ +#if defined(__GNUC__) && (defined(__powerpc__) || defined(__ppc__)) +#define SDL_MemoryBarrierRelease() __asm__ __volatile__ ("lwsync" : : : "memory") +#define SDL_MemoryBarrierAcquire() __asm__ __volatile__ ("lwsync" : : : "memory") +#elif defined(__GNUC__) && defined(__arm__) +#if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_7R__) || defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7S__) +#define SDL_MemoryBarrierRelease() __asm__ __volatile__ ("dmb ish" : : : "memory") +#define SDL_MemoryBarrierAcquire() __asm__ __volatile__ ("dmb ish" : : : "memory") +#elif defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) || defined(__ARM_ARCH_6K__) || defined(__ARM_ARCH_6T2__) || defined(__ARM_ARCH_6Z__) || defined(__ARM_ARCH_6ZK__) +#ifdef __thumb__ +/* The mcr instruction isn't available in thumb mode, use real functions */ +extern DECLSPEC void SDLCALL SDL_MemoryBarrierRelease(); +extern DECLSPEC void SDLCALL SDL_MemoryBarrierAcquire(); +#else +#define SDL_MemoryBarrierRelease() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" : : "r"(0) : "memory") +#define SDL_MemoryBarrierAcquire() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" : : "r"(0) : "memory") +#endif /* __thumb__ */ +#else +#define SDL_MemoryBarrierRelease() __asm__ __volatile__ ("" : : : "memory") +#define SDL_MemoryBarrierAcquire() __asm__ __volatile__ ("" : : : "memory") +#endif /* __GNUC__ && __arm__ */ +#else +/* This is correct for the x86 and x64 CPUs, and we'll expand this over time. */ +#define SDL_MemoryBarrierRelease() SDL_CompilerBarrier() +#define SDL_MemoryBarrierAcquire() SDL_CompilerBarrier() +#endif + + +/* Platform specific optimized versions of the atomic functions, + * you can disable these by defining SDL_DISABLE_ATOMIC_INLINE + */ +#if defined(SDL_ATOMIC_DISABLED) && SDL_ATOMIC_DISABLED +#define SDL_DISABLE_ATOMIC_INLINE +#endif +#ifndef SDL_DISABLE_ATOMIC_INLINE + +#ifdef HAVE_MSC_ATOMICS + +#define SDL_AtomicSet(a, v) _InterlockedExchange((long*)&(a)->value, (v)) +#define SDL_AtomicAdd(a, v) _InterlockedExchangeAdd((long*)&(a)->value, (v)) +#define SDL_AtomicCAS(a, oldval, newval) (_InterlockedCompareExchange((long*)&(a)->value, (newval), (oldval)) == (oldval)) +#define SDL_AtomicSetPtr(a, v) _InterlockedExchangePointer((a), (v)) +#if _M_IX86 +#define SDL_AtomicCASPtr(a, oldval, newval) (_InterlockedCompareExchange((long*)(a), (long)(newval), (long)(oldval)) == (long)(oldval)) +#else +#define SDL_AtomicCASPtr(a, oldval, newval) (_InterlockedCompareExchangePointer((a), (newval), (oldval)) == (oldval)) +#endif + +#elif defined(__MACOSX__) +#include + +#define SDL_AtomicCAS(a, oldval, newval) OSAtomicCompareAndSwap32Barrier((oldval), (newval), &(a)->value) +#ifdef __LP64__ +#define SDL_AtomicCASPtr(a, oldval, newval) OSAtomicCompareAndSwap64Barrier((int64_t)(oldval), (int64_t)(newval), (int64_t*)(a)) +#else +#define SDL_AtomicCASPtr(a, oldval, newval) OSAtomicCompareAndSwap32Barrier((int32_t)(oldval), (int32_t)(newval), (int32_t*)(a)) +#endif + +#elif defined(HAVE_GCC_ATOMICS) + +#define SDL_AtomicSet(a, v) __sync_lock_test_and_set(&(a)->value, v) +#define SDL_AtomicAdd(a, v) __sync_fetch_and_add(&(a)->value, v) +#define SDL_AtomicSetPtr(a, v) __sync_lock_test_and_set(a, v) +#define SDL_AtomicCAS(a, oldval, newval) __sync_bool_compare_and_swap(&(a)->value, oldval, newval) +#define SDL_AtomicCASPtr(a, oldval, newval) __sync_bool_compare_and_swap(a, oldval, newval) + +#endif + +#endif /* !SDL_DISABLE_ATOMIC_INLINE */ + + +/** + * \brief A type representing an atomic integer value. It is a struct + * so people don't accidentally use numeric operations on it. + */ +#ifndef SDL_atomic_t_defined +typedef struct { int value; } SDL_atomic_t; +#endif + +/** + * \brief Set an atomic variable to a new value if it is currently an old value. + * + * \return SDL_TRUE if the atomic variable was set, SDL_FALSE otherwise. + * + * \note If you don't know what this function is for, you shouldn't use it! +*/ +#ifndef SDL_AtomicCAS +extern DECLSPEC SDL_bool SDLCALL SDL_AtomicCAS(SDL_atomic_t *a, int oldval, int newval); +#endif + +/** + * \brief Set an atomic variable to a value. + * + * \return The previous value of the atomic variable. + */ +#ifndef SDL_AtomicSet +SDL_FORCE_INLINE int SDL_AtomicSet(SDL_atomic_t *a, int v) +{ + int value; + do { + value = a->value; + } while (!SDL_AtomicCAS(a, value, v)); + return value; +} +#endif + +/** + * \brief Get the value of an atomic variable + */ +#ifndef SDL_AtomicGet +SDL_FORCE_INLINE int SDL_AtomicGet(SDL_atomic_t *a) +{ + int value = a->value; + SDL_CompilerBarrier(); + return value; +} +#endif + +/** + * \brief Add to an atomic variable. + * + * \return The previous value of the atomic variable. + * + * \note This same style can be used for any number operation + */ +#ifndef SDL_AtomicAdd +SDL_FORCE_INLINE int SDL_AtomicAdd(SDL_atomic_t *a, int v) +{ + int value; + do { + value = a->value; + } while (!SDL_AtomicCAS(a, value, (value + v))); + return value; +} +#endif + +/** + * \brief Increment an atomic variable used as a reference count. + */ +#ifndef SDL_AtomicIncRef +#define SDL_AtomicIncRef(a) SDL_AtomicAdd(a, 1) +#endif + +/** + * \brief Decrement an atomic variable used as a reference count. + * + * \return SDL_TRUE if the variable reached zero after decrementing, + * SDL_FALSE otherwise + */ +#ifndef SDL_AtomicDecRef +#define SDL_AtomicDecRef(a) (SDL_AtomicAdd(a, -1) == 1) +#endif + +/** + * \brief Set a pointer to a new value if it is currently an old value. + * + * \return SDL_TRUE if the pointer was set, SDL_FALSE otherwise. + * + * \note If you don't know what this function is for, you shouldn't use it! +*/ +#ifndef SDL_AtomicCASPtr +extern DECLSPEC SDL_bool SDLCALL SDL_AtomicCASPtr(void* *a, void *oldval, void *newval); +#endif + +/** + * \brief Set a pointer to a value atomically. + * + * \return The previous value of the pointer. + */ +#ifndef SDL_AtomicSetPtr +SDL_FORCE_INLINE void* SDL_AtomicSetPtr(void* *a, void* v) +{ + void* value; + do { + value = *a; + } while (!SDL_AtomicCASPtr(a, value, v)); + return value; +} +#endif + +/** + * \brief Get the value of a pointer atomically. + */ +#ifndef SDL_AtomicGetPtr +SDL_FORCE_INLINE void* SDL_AtomicGetPtr(void* *a) +{ + void* value = *a; + SDL_CompilerBarrier(); + return value; +} +#endif + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif + +#include "close_code.h" + +#endif /* _SDL_atomic_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_audio.h b/src/SDL2/SDL_audio.h new file mode 100644 index 000000000..0b6f28af6 --- /dev/null +++ b/src/SDL2/SDL_audio.h @@ -0,0 +1,506 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_audio.h + * + * Access to the raw audio mixing buffer for the SDL library. + */ + +#ifndef _SDL_audio_h +#define _SDL_audio_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_endian.h" +#include "SDL_mutex.h" +#include "SDL_thread.h" +#include "SDL_rwops.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Audio format flags. + * + * These are what the 16 bits in SDL_AudioFormat currently mean... + * (Unspecified bits are always zero). + * + * \verbatim + ++-----------------------sample is signed if set + || + || ++-----------sample is bigendian if set + || || + || || ++---sample is float if set + || || || + || || || +---sample bit size---+ + || || || | | + 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 + \endverbatim + * + * There are macros in SDL 2.0 and later to query these bits. + */ +typedef Uint16 SDL_AudioFormat; + +/** + * \name Audio flags + */ +/*@{*/ + +#define SDL_AUDIO_MASK_BITSIZE (0xFF) +#define SDL_AUDIO_MASK_DATATYPE (1<<8) +#define SDL_AUDIO_MASK_ENDIAN (1<<12) +#define SDL_AUDIO_MASK_SIGNED (1<<15) +#define SDL_AUDIO_BITSIZE(x) (x & SDL_AUDIO_MASK_BITSIZE) +#define SDL_AUDIO_ISFLOAT(x) (x & SDL_AUDIO_MASK_DATATYPE) +#define SDL_AUDIO_ISBIGENDIAN(x) (x & SDL_AUDIO_MASK_ENDIAN) +#define SDL_AUDIO_ISSIGNED(x) (x & SDL_AUDIO_MASK_SIGNED) +#define SDL_AUDIO_ISINT(x) (!SDL_AUDIO_ISFLOAT(x)) +#define SDL_AUDIO_ISLITTLEENDIAN(x) (!SDL_AUDIO_ISBIGENDIAN(x)) +#define SDL_AUDIO_ISUNSIGNED(x) (!SDL_AUDIO_ISSIGNED(x)) + +/** + * \name Audio format flags + * + * Defaults to LSB byte order. + */ +/*@{*/ +#define AUDIO_U8 0x0008 /**< Unsigned 8-bit samples */ +#define AUDIO_S8 0x8008 /**< Signed 8-bit samples */ +#define AUDIO_U16LSB 0x0010 /**< Unsigned 16-bit samples */ +#define AUDIO_S16LSB 0x8010 /**< Signed 16-bit samples */ +#define AUDIO_U16MSB 0x1010 /**< As above, but big-endian byte order */ +#define AUDIO_S16MSB 0x9010 /**< As above, but big-endian byte order */ +#define AUDIO_U16 AUDIO_U16LSB +#define AUDIO_S16 AUDIO_S16LSB +/*@}*/ + +/** + * \name int32 support + */ +/*@{*/ +#define AUDIO_S32LSB 0x8020 /**< 32-bit integer samples */ +#define AUDIO_S32MSB 0x9020 /**< As above, but big-endian byte order */ +#define AUDIO_S32 AUDIO_S32LSB +/*@}*/ + +/** + * \name float32 support + */ +/*@{*/ +#define AUDIO_F32LSB 0x8120 /**< 32-bit floating point samples */ +#define AUDIO_F32MSB 0x9120 /**< As above, but big-endian byte order */ +#define AUDIO_F32 AUDIO_F32LSB +/*@}*/ + +/** + * \name Native audio byte ordering + */ +/*@{*/ +#if SDL_BYTEORDER == SDL_LIL_ENDIAN +#define AUDIO_U16SYS AUDIO_U16LSB +#define AUDIO_S16SYS AUDIO_S16LSB +#define AUDIO_S32SYS AUDIO_S32LSB +#define AUDIO_F32SYS AUDIO_F32LSB +#else +#define AUDIO_U16SYS AUDIO_U16MSB +#define AUDIO_S16SYS AUDIO_S16MSB +#define AUDIO_S32SYS AUDIO_S32MSB +#define AUDIO_F32SYS AUDIO_F32MSB +#endif +/*@}*/ + +/** + * \name Allow change flags + * + * Which audio format changes are allowed when opening a device. + */ +/*@{*/ +#define SDL_AUDIO_ALLOW_FREQUENCY_CHANGE 0x00000001 +#define SDL_AUDIO_ALLOW_FORMAT_CHANGE 0x00000002 +#define SDL_AUDIO_ALLOW_CHANNELS_CHANGE 0x00000004 +#define SDL_AUDIO_ALLOW_ANY_CHANGE (SDL_AUDIO_ALLOW_FREQUENCY_CHANGE|SDL_AUDIO_ALLOW_FORMAT_CHANGE|SDL_AUDIO_ALLOW_CHANNELS_CHANGE) +/*@}*/ + +/*@}*//*Audio flags*/ + +/** + * This function is called when the audio device needs more data. + * + * \param userdata An application-specific parameter saved in + * the SDL_AudioSpec structure + * \param stream A pointer to the audio data buffer. + * \param len The length of that buffer in bytes. + * + * Once the callback returns, the buffer will no longer be valid. + * Stereo samples are stored in a LRLRLR ordering. + */ +typedef void (SDLCALL * SDL_AudioCallback) (void *userdata, Uint8 * stream, + int len); + +/** + * The calculated values in this structure are calculated by SDL_OpenAudio(). + */ +typedef struct SDL_AudioSpec +{ + int freq; /**< DSP frequency -- samples per second */ + SDL_AudioFormat format; /**< Audio data format */ + Uint8 channels; /**< Number of channels: 1 mono, 2 stereo */ + Uint8 silence; /**< Audio buffer silence value (calculated) */ + Uint16 samples; /**< Audio buffer size in samples (power of 2) */ + Uint16 padding; /**< Necessary for some compile environments */ + Uint32 size; /**< Audio buffer size in bytes (calculated) */ + SDL_AudioCallback callback; + void *userdata; +} SDL_AudioSpec; + + +struct SDL_AudioCVT; +typedef void (SDLCALL * SDL_AudioFilter) (struct SDL_AudioCVT * cvt, + SDL_AudioFormat format); + +/** + * A structure to hold a set of audio conversion filters and buffers. + */ +#ifdef __GNUC__ +/* This structure is 84 bytes on 32-bit architectures, make sure GCC doesn't + pad it out to 88 bytes to guarantee ABI compatibility between compilers. + vvv + The next time we rev the ABI, make sure to size the ints and add padding. +*/ +#define SDL_AUDIOCVT_PACKED __attribute__((packed)) +#else +#define SDL_AUDIOCVT_PACKED +#endif +/* */ +typedef struct SDL_AudioCVT +{ + int needed; /**< Set to 1 if conversion possible */ + SDL_AudioFormat src_format; /**< Source audio format */ + SDL_AudioFormat dst_format; /**< Target audio format */ + double rate_incr; /**< Rate conversion increment */ + Uint8 *buf; /**< Buffer to hold entire audio data */ + int len; /**< Length of original audio buffer */ + int len_cvt; /**< Length of converted audio buffer */ + int len_mult; /**< buffer must be len*len_mult big */ + double len_ratio; /**< Given len, final size is len*len_ratio */ + SDL_AudioFilter filters[10]; /**< Filter list */ + int filter_index; /**< Current audio conversion function */ +} SDL_AUDIOCVT_PACKED SDL_AudioCVT; + + +/* Function prototypes */ + +/** + * \name Driver discovery functions + * + * These functions return the list of built in audio drivers, in the + * order that they are normally initialized by default. + */ +/*@{*/ +extern DECLSPEC int SDLCALL SDL_GetNumAudioDrivers(void); +extern DECLSPEC const char *SDLCALL SDL_GetAudioDriver(int index); +/*@}*/ + +/** + * \name Initialization and cleanup + * + * \internal These functions are used internally, and should not be used unless + * you have a specific need to specify the audio driver you want to + * use. You should normally use SDL_Init() or SDL_InitSubSystem(). + */ +/*@{*/ +extern DECLSPEC int SDLCALL SDL_AudioInit(const char *driver_name); +extern DECLSPEC void SDLCALL SDL_AudioQuit(void); +/*@}*/ + +/** + * This function returns the name of the current audio driver, or NULL + * if no driver has been initialized. + */ +extern DECLSPEC const char *SDLCALL SDL_GetCurrentAudioDriver(void); + +/** + * This function opens the audio device with the desired parameters, and + * returns 0 if successful, placing the actual hardware parameters in the + * structure pointed to by \c obtained. If \c obtained is NULL, the audio + * data passed to the callback function will be guaranteed to be in the + * requested format, and will be automatically converted to the hardware + * audio format if necessary. This function returns -1 if it failed + * to open the audio device, or couldn't set up the audio thread. + * + * When filling in the desired audio spec structure, + * - \c desired->freq should be the desired audio frequency in samples-per- + * second. + * - \c desired->format should be the desired audio format. + * - \c desired->samples is the desired size of the audio buffer, in + * samples. This number should be a power of two, and may be adjusted by + * the audio driver to a value more suitable for the hardware. Good values + * seem to range between 512 and 8096 inclusive, depending on the + * application and CPU speed. Smaller values yield faster response time, + * but can lead to underflow if the application is doing heavy processing + * and cannot fill the audio buffer in time. A stereo sample consists of + * both right and left channels in LR ordering. + * Note that the number of samples is directly related to time by the + * following formula: \code ms = (samples*1000)/freq \endcode + * - \c desired->size is the size in bytes of the audio buffer, and is + * calculated by SDL_OpenAudio(). + * - \c desired->silence is the value used to set the buffer to silence, + * and is calculated by SDL_OpenAudio(). + * - \c desired->callback should be set to a function that will be called + * when the audio device is ready for more data. It is passed a pointer + * to the audio buffer, and the length in bytes of the audio buffer. + * This function usually runs in a separate thread, and so you should + * protect data structures that it accesses by calling SDL_LockAudio() + * and SDL_UnlockAudio() in your code. + * - \c desired->userdata is passed as the first parameter to your callback + * function. + * + * The audio device starts out playing silence when it's opened, and should + * be enabled for playing by calling \c SDL_PauseAudio(0) when you are ready + * for your audio callback function to be called. Since the audio driver + * may modify the requested size of the audio buffer, you should allocate + * any local mixing buffers after you open the audio device. + */ +extern DECLSPEC int SDLCALL SDL_OpenAudio(SDL_AudioSpec * desired, + SDL_AudioSpec * obtained); + +/** + * SDL Audio Device IDs. + * + * A successful call to SDL_OpenAudio() is always device id 1, and legacy + * SDL audio APIs assume you want this device ID. SDL_OpenAudioDevice() calls + * always returns devices >= 2 on success. The legacy calls are good both + * for backwards compatibility and when you don't care about multiple, + * specific, or capture devices. + */ +typedef Uint32 SDL_AudioDeviceID; + +/** + * Get the number of available devices exposed by the current driver. + * Only valid after a successfully initializing the audio subsystem. + * Returns -1 if an explicit list of devices can't be determined; this is + * not an error. For example, if SDL is set up to talk to a remote audio + * server, it can't list every one available on the Internet, but it will + * still allow a specific host to be specified to SDL_OpenAudioDevice(). + * + * In many common cases, when this function returns a value <= 0, it can still + * successfully open the default device (NULL for first argument of + * SDL_OpenAudioDevice()). + */ +extern DECLSPEC int SDLCALL SDL_GetNumAudioDevices(int iscapture); + +/** + * Get the human-readable name of a specific audio device. + * Must be a value between 0 and (number of audio devices-1). + * Only valid after a successfully initializing the audio subsystem. + * The values returned by this function reflect the latest call to + * SDL_GetNumAudioDevices(); recall that function to redetect available + * hardware. + * + * The string returned by this function is UTF-8 encoded, read-only, and + * managed internally. You are not to free it. If you need to keep the + * string for any length of time, you should make your own copy of it, as it + * will be invalid next time any of several other SDL functions is called. + */ +extern DECLSPEC const char *SDLCALL SDL_GetAudioDeviceName(int index, + int iscapture); + + +/** + * Open a specific audio device. Passing in a device name of NULL requests + * the most reasonable default (and is equivalent to calling SDL_OpenAudio()). + * + * The device name is a UTF-8 string reported by SDL_GetAudioDeviceName(), but + * some drivers allow arbitrary and driver-specific strings, such as a + * hostname/IP address for a remote audio server, or a filename in the + * diskaudio driver. + * + * \return 0 on error, a valid device ID that is >= 2 on success. + * + * SDL_OpenAudio(), unlike this function, always acts on device ID 1. + */ +extern DECLSPEC SDL_AudioDeviceID SDLCALL SDL_OpenAudioDevice(const char + *device, + int iscapture, + const + SDL_AudioSpec * + desired, + SDL_AudioSpec * + obtained, + int + allowed_changes); + + + +/** + * \name Audio state + * + * Get the current audio state. + */ +/*@{*/ +typedef enum +{ + SDL_AUDIO_STOPPED = 0, + SDL_AUDIO_PLAYING, + SDL_AUDIO_PAUSED +} SDL_AudioStatus; +extern DECLSPEC SDL_AudioStatus SDLCALL SDL_GetAudioStatus(void); + +extern DECLSPEC SDL_AudioStatus SDLCALL +SDL_GetAudioDeviceStatus(SDL_AudioDeviceID dev); +/*@}*//*Audio State*/ + +/** + * \name Pause audio functions + * + * These functions pause and unpause the audio callback processing. + * They should be called with a parameter of 0 after opening the audio + * device to start playing sound. This is so you can safely initialize + * data for your callback function after opening the audio device. + * Silence will be written to the audio device during the pause. + */ +/*@{*/ +extern DECLSPEC void SDLCALL SDL_PauseAudio(int pause_on); +extern DECLSPEC void SDLCALL SDL_PauseAudioDevice(SDL_AudioDeviceID dev, + int pause_on); +/*@}*//*Pause audio functions*/ + +/** + * This function loads a WAVE from the data source, automatically freeing + * that source if \c freesrc is non-zero. For example, to load a WAVE file, + * you could do: + * \code + * SDL_LoadWAV_RW(SDL_RWFromFile("sample.wav", "rb"), 1, ...); + * \endcode + * + * If this function succeeds, it returns the given SDL_AudioSpec, + * filled with the audio data format of the wave data, and sets + * \c *audio_buf to a malloc()'d buffer containing the audio data, + * and sets \c *audio_len to the length of that audio buffer, in bytes. + * You need to free the audio buffer with SDL_FreeWAV() when you are + * done with it. + * + * This function returns NULL and sets the SDL error message if the + * wave file cannot be opened, uses an unknown data format, or is + * corrupt. Currently raw and MS-ADPCM WAVE files are supported. + */ +extern DECLSPEC SDL_AudioSpec *SDLCALL SDL_LoadWAV_RW(SDL_RWops * src, + int freesrc, + SDL_AudioSpec * spec, + Uint8 ** audio_buf, + Uint32 * audio_len); + +/** + * Loads a WAV from a file. + * Compatibility convenience function. + */ +#define SDL_LoadWAV(file, spec, audio_buf, audio_len) \ + SDL_LoadWAV_RW(SDL_RWFromFile(file, "rb"),1, spec,audio_buf,audio_len) + +/** + * This function frees data previously allocated with SDL_LoadWAV_RW() + */ +extern DECLSPEC void SDLCALL SDL_FreeWAV(Uint8 * audio_buf); + +/** + * This function takes a source format and rate and a destination format + * and rate, and initializes the \c cvt structure with information needed + * by SDL_ConvertAudio() to convert a buffer of audio data from one format + * to the other. + * + * \return -1 if the format conversion is not supported, 0 if there's + * no conversion needed, or 1 if the audio filter is set up. + */ +extern DECLSPEC int SDLCALL SDL_BuildAudioCVT(SDL_AudioCVT * cvt, + SDL_AudioFormat src_format, + Uint8 src_channels, + int src_rate, + SDL_AudioFormat dst_format, + Uint8 dst_channels, + int dst_rate); + +/** + * Once you have initialized the \c cvt structure using SDL_BuildAudioCVT(), + * created an audio buffer \c cvt->buf, and filled it with \c cvt->len bytes of + * audio data in the source format, this function will convert it in-place + * to the desired format. + * + * The data conversion may expand the size of the audio data, so the buffer + * \c cvt->buf should be allocated after the \c cvt structure is initialized by + * SDL_BuildAudioCVT(), and should be \c cvt->len*cvt->len_mult bytes long. + */ +extern DECLSPEC int SDLCALL SDL_ConvertAudio(SDL_AudioCVT * cvt); + +#define SDL_MIX_MAXVOLUME 128 +/** + * This takes two audio buffers of the playing audio format and mixes + * them, performing addition, volume adjustment, and overflow clipping. + * The volume ranges from 0 - 128, and should be set to ::SDL_MIX_MAXVOLUME + * for full audio volume. Note this does not change hardware volume. + * This is provided for convenience -- you can mix your own audio data. + */ +extern DECLSPEC void SDLCALL SDL_MixAudio(Uint8 * dst, const Uint8 * src, + Uint32 len, int volume); + +/** + * This works like SDL_MixAudio(), but you specify the audio format instead of + * using the format of audio device 1. Thus it can be used when no audio + * device is open at all. + */ +extern DECLSPEC void SDLCALL SDL_MixAudioFormat(Uint8 * dst, + const Uint8 * src, + SDL_AudioFormat format, + Uint32 len, int volume); + +/** + * \name Audio lock functions + * + * The lock manipulated by these functions protects the callback function. + * During a SDL_LockAudio()/SDL_UnlockAudio() pair, you can be guaranteed that + * the callback function is not running. Do not call these from the callback + * function or you will cause deadlock. + */ +/*@{*/ +extern DECLSPEC void SDLCALL SDL_LockAudio(void); +extern DECLSPEC void SDLCALL SDL_LockAudioDevice(SDL_AudioDeviceID dev); +extern DECLSPEC void SDLCALL SDL_UnlockAudio(void); +extern DECLSPEC void SDLCALL SDL_UnlockAudioDevice(SDL_AudioDeviceID dev); +/*@}*//*Audio lock functions*/ + +/** + * This function shuts down audio processing and closes the audio device. + */ +extern DECLSPEC void SDLCALL SDL_CloseAudio(void); +extern DECLSPEC void SDLCALL SDL_CloseAudioDevice(SDL_AudioDeviceID dev); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_audio_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_blendmode.h b/src/SDL2/SDL_blendmode.h new file mode 100644 index 000000000..85aa47459 --- /dev/null +++ b/src/SDL2/SDL_blendmode.h @@ -0,0 +1,63 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_blendmode.h + * + * Header file declaring the SDL_BlendMode enumeration + */ + +#ifndef _SDL_blendmode_h +#define _SDL_blendmode_h + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief The blend mode used in SDL_RenderCopy() and drawing operations. + */ +typedef enum +{ + SDL_BLENDMODE_NONE = 0x00000000, /**< no blending + dstRGBA = srcRGBA */ + SDL_BLENDMODE_BLEND = 0x00000001, /**< alpha blending + dstRGB = (srcRGB * srcA) + (dstRGB * (1-srcA)) + dstA = srcA + (dstA * (1-srcA)) */ + SDL_BLENDMODE_ADD = 0x00000002, /**< additive blending + dstRGB = (srcRGB * srcA) + dstRGB + dstA = dstA */ + SDL_BLENDMODE_MOD = 0x00000004 /**< color modulate + dstRGB = srcRGB * dstRGB + dstA = dstA */ +} SDL_BlendMode; + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_video_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_clipboard.h b/src/SDL2/SDL_clipboard.h new file mode 100644 index 000000000..1f5742d16 --- /dev/null +++ b/src/SDL2/SDL_clipboard.h @@ -0,0 +1,71 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_clipboard.h + * + * Include file for SDL clipboard handling + */ + +#ifndef _SDL_clipboard_h +#define _SDL_clipboard_h + +#include "SDL_stdinc.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* Function prototypes */ + +/** + * \brief Put UTF-8 text into the clipboard + * + * \sa SDL_GetClipboardText() + */ +extern DECLSPEC int SDLCALL SDL_SetClipboardText(const char *text); + +/** + * \brief Get UTF-8 text from the clipboard, which must be freed with SDL_free() + * + * \sa SDL_SetClipboardText() + */ +extern DECLSPEC char * SDLCALL SDL_GetClipboardText(void); + +/** + * \brief Returns a flag indicating whether the clipboard exists and contains a text string that is non-empty + * + * \sa SDL_GetClipboardText() + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasClipboardText(void); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_clipboard_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_config.h b/src/SDL2/SDL_config.h new file mode 100644 index 000000000..7440940ad --- /dev/null +++ b/src/SDL2/SDL_config.h @@ -0,0 +1,51 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef _SDL_config_h +#define _SDL_config_h + +#include "SDL_platform.h" + +/** + * \file SDL_config.h + */ + +/* Add any platform that doesn't build using the configure system. */ +#if defined(__WIN32__) +#include "SDL_config_windows.h" +#elif defined(__MACOSX__) +#include "SDL_config_macosx.h" +#elif defined(__IPHONEOS__) +#include "SDL_config_iphoneos.h" +#elif defined(__ANDROID__) +#include "SDL_config_android.h" +#elif defined(__PSP__) +#include "SDL_config_psp.h" +#else +/* This is a minimal configuration just to get SDL running on new platforms */ +#include "SDL_config_minimal.h" +#endif /* platform config */ + +#ifdef USING_GENERATED_CONFIG_H +#error Wrong SDL_config.h, check your include path? +#endif + +#endif /* _SDL_config_h */ diff --git a/src/SDL2/SDL_config_macosx.h b/src/SDL2/SDL_config_macosx.h new file mode 100644 index 000000000..68a0ebb9b --- /dev/null +++ b/src/SDL2/SDL_config_macosx.h @@ -0,0 +1,180 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef _SDL_config_macosx_h +#define _SDL_config_macosx_h + +#include "SDL_platform.h" + +/* This gets us MAC_OS_X_VERSION_MIN_REQUIRED... */ +#include + +/* This is a set of defines to configure the SDL features */ + +#ifdef __LP64__ + #define SIZEOF_VOIDP 8 +#else + #define SIZEOF_VOIDP 4 +#endif + +/* Useful headers */ +#define HAVE_ALLOCA_H 1 +#define HAVE_SYS_TYPES_H 1 +#define HAVE_STDIO_H 1 +#define STDC_HEADERS 1 +#define HAVE_STRING_H 1 +#define HAVE_INTTYPES_H 1 +#define HAVE_STDINT_H 1 +#define HAVE_CTYPE_H 1 +#define HAVE_MATH_H 1 +#define HAVE_SIGNAL_H 1 + +/* C library functions */ +#define HAVE_MALLOC 1 +#define HAVE_CALLOC 1 +#define HAVE_REALLOC 1 +#define HAVE_FREE 1 +#define HAVE_ALLOCA 1 +#define HAVE_GETENV 1 +#define HAVE_SETENV 1 +#define HAVE_PUTENV 1 +#define HAVE_UNSETENV 1 +#define HAVE_QSORT 1 +#define HAVE_ABS 1 +#define HAVE_BCOPY 1 +#define HAVE_MEMSET 1 +#define HAVE_MEMCPY 1 +#define HAVE_MEMMOVE 1 +#define HAVE_MEMCMP 1 +#define HAVE_STRLEN 1 +#define HAVE_STRLCPY 1 +#define HAVE_STRLCAT 1 +#define HAVE_STRDUP 1 +#define HAVE_STRCHR 1 +#define HAVE_STRRCHR 1 +#define HAVE_STRSTR 1 +#define HAVE_STRTOL 1 +#define HAVE_STRTOUL 1 +#define HAVE_STRTOLL 1 +#define HAVE_STRTOULL 1 +#define HAVE_STRTOD 1 +#define HAVE_ATOI 1 +#define HAVE_ATOF 1 +#define HAVE_STRCMP 1 +#define HAVE_STRNCMP 1 +#define HAVE_STRCASECMP 1 +#define HAVE_STRNCASECMP 1 +#define HAVE_SSCANF 1 +#define HAVE_SNPRINTF 1 +#define HAVE_VSNPRINTF 1 +#define HAVE_CEIL 1 +#define HAVE_COPYSIGN 1 +#define HAVE_COS 1 +#define HAVE_COSF 1 +#define HAVE_FABS 1 +#define HAVE_FLOOR 1 +#define HAVE_LOG 1 +#define HAVE_POW 1 +#define HAVE_SCALBN 1 +#define HAVE_SIN 1 +#define HAVE_SINF 1 +#define HAVE_SQRT 1 +#define HAVE_SIGACTION 1 +#define HAVE_SETJMP 1 +#define HAVE_NANOSLEEP 1 +#define HAVE_SYSCONF 1 +#define HAVE_SYSCTLBYNAME 1 +#define HAVE_ATAN 1 +#define HAVE_ATAN2 1 + +/* Enable various audio drivers */ +#define SDL_AUDIO_DRIVER_COREAUDIO 1 +#define SDL_AUDIO_DRIVER_DISK 1 +#define SDL_AUDIO_DRIVER_DUMMY 1 + +/* Enable various input drivers */ +#define SDL_JOYSTICK_IOKIT 1 +#define SDL_HAPTIC_IOKIT 1 + +/* Enable various shared object loading systems */ +#define SDL_LOADSO_DLOPEN 1 + +/* Enable various threading systems */ +#define SDL_THREAD_PTHREAD 1 +#define SDL_THREAD_PTHREAD_RECURSIVE_MUTEX 1 + +/* Enable various timer systems */ +#define SDL_TIMER_UNIX 1 + +/* Enable various video drivers */ +#define SDL_VIDEO_DRIVER_COCOA 1 +#define SDL_VIDEO_DRIVER_DUMMY 1 +#undef SDL_VIDEO_DRIVER_X11 +#define SDL_VIDEO_DRIVER_X11_DYNAMIC "/usr/X11R6/lib/libX11.6.dylib" +#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XEXT "/usr/X11R6/lib/libXext.6.dylib" +#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XINERAMA "/usr/X11R6/lib/libXinerama.1.dylib" +#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XINPUT2 "/usr/X11R6/lib/libXi.6.dylib" +#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XRANDR "/usr/X11R6/lib/libXrandr.2.dylib" +#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XSS "/usr/X11R6/lib/libXss.1.dylib" +#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XVIDMODE "/usr/X11R6/lib/libXxf86vm.1.dylib" +#define SDL_VIDEO_DRIVER_X11_XINERAMA 1 +#define SDL_VIDEO_DRIVER_X11_XRANDR 1 +#define SDL_VIDEO_DRIVER_X11_XSCRNSAVER 1 +#define SDL_VIDEO_DRIVER_X11_XSHAPE 1 +#define SDL_VIDEO_DRIVER_X11_XVIDMODE 1 +#define SDL_VIDEO_DRIVER_X11_HAS_XKBKEYCODETOKEYSYM 1 + +#ifdef MAC_OS_X_VERSION_10_8 +/* + * No matter the versions targeted, this is the 10.8 or later SDK, so you have + * to use the external Xquartz, which is a more modern Xlib. Previous SDKs + * used an older Xlib. + */ +#define SDL_VIDEO_DRIVER_X11_XINPUT2 1 +#define SDL_VIDEO_DRIVER_X11_SUPPORTS_GENERIC_EVENTS 1 +#define SDL_VIDEO_DRIVER_X11_CONST_PARAM_XEXTADDDISPLAY 1 +#endif + +#ifndef SDL_VIDEO_RENDER_OGL +#define SDL_VIDEO_RENDER_OGL 1 +#endif + +/* Enable OpenGL support */ +#ifndef SDL_VIDEO_OPENGL +#define SDL_VIDEO_OPENGL 1 +#endif +#ifndef SDL_VIDEO_OPENGL_CGL +#define SDL_VIDEO_OPENGL_CGL 1 +#endif +#ifndef SDL_VIDEO_OPENGL_GLX +#define SDL_VIDEO_OPENGL_GLX 1 +#endif + +/* Enable system power support */ +#define SDL_POWER_MACOSX 1 + +/* Enable assembly routines */ +#define SDL_ASSEMBLY_ROUTINES 1 +#ifdef __ppc__ +#define SDL_ALTIVEC_BLITTERS 1 +#endif + +#endif /* _SDL_config_macosx_h */ diff --git a/src/SDL2/SDL_copying.h b/src/SDL2/SDL_copying.h new file mode 100644 index 000000000..3a8fb758a --- /dev/null +++ b/src/SDL2/SDL_copying.h @@ -0,0 +1,20 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ diff --git a/src/SDL2/SDL_cpuinfo.h b/src/SDL2/SDL_cpuinfo.h new file mode 100644 index 000000000..dde3074f0 --- /dev/null +++ b/src/SDL2/SDL_cpuinfo.h @@ -0,0 +1,146 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_cpuinfo.h + * + * CPU feature detection for SDL. + */ + +#ifndef _SDL_cpuinfo_h +#define _SDL_cpuinfo_h + +#include "SDL_stdinc.h" + +/* Need to do this here because intrin.h has C++ code in it */ +/* Visual Studio 2005 has a bug where intrin.h conflicts with winnt.h */ +#if defined(_MSC_VER) && (_MSC_VER >= 1500) +#include +#ifndef _WIN64 +#define __MMX__ +#define __3dNOW__ +#endif +#define __SSE__ +#define __SSE2__ +#elif defined(__MINGW64_VERSION_MAJOR) +#include +#else +#ifdef __ALTIVEC__ +#if HAVE_ALTIVEC_H && !defined(__APPLE_ALTIVEC__) +#include +#undef pixel +#endif +#endif +#ifdef __MMX__ +#include +#endif +#ifdef __3dNOW__ +#include +#endif +#ifdef __SSE__ +#include +#endif +#ifdef __SSE2__ +#include +#endif +#endif + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* This is a guess for the cacheline size used for padding. + * Most x86 processors have a 64 byte cache line. + * The 64-bit PowerPC processors have a 128 byte cache line. + * We'll use the larger value to be generally safe. + */ +#define SDL_CACHELINE_SIZE 128 + +/** + * This function returns the number of CPU cores available. + */ +extern DECLSPEC int SDLCALL SDL_GetCPUCount(void); + +/** + * This function returns the L1 cache line size of the CPU + * + * This is useful for determining multi-threaded structure padding + * or SIMD prefetch sizes. + */ +extern DECLSPEC int SDLCALL SDL_GetCPUCacheLineSize(void); + +/** + * This function returns true if the CPU has the RDTSC instruction. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasRDTSC(void); + +/** + * This function returns true if the CPU has AltiVec features. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasAltiVec(void); + +/** + * This function returns true if the CPU has MMX features. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasMMX(void); + +/** + * This function returns true if the CPU has 3DNow! features. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_Has3DNow(void); + +/** + * This function returns true if the CPU has SSE features. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasSSE(void); + +/** + * This function returns true if the CPU has SSE2 features. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasSSE2(void); + +/** + * This function returns true if the CPU has SSE3 features. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasSSE3(void); + +/** + * This function returns true if the CPU has SSE4.1 features. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasSSE41(void); + +/** + * This function returns true if the CPU has SSE4.2 features. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasSSE42(void); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_cpuinfo_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_endian.h b/src/SDL2/SDL_endian.h new file mode 100644 index 000000000..c58edcca0 --- /dev/null +++ b/src/SDL2/SDL_endian.h @@ -0,0 +1,239 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_endian.h + * + * Functions for reading and writing endian-specific values + */ + +#ifndef _SDL_endian_h +#define _SDL_endian_h + +#include "SDL_stdinc.h" + +/** + * \name The two types of endianness + */ +/*@{*/ +#define SDL_LIL_ENDIAN 1234 +#define SDL_BIG_ENDIAN 4321 +/*@}*/ + +#ifndef SDL_BYTEORDER /* Not defined in SDL_config.h? */ +#ifdef __linux__ +#include +#define SDL_BYTEORDER __BYTE_ORDER +#else /* __linux __ */ +#if defined(__hppa__) || \ + defined(__m68k__) || defined(mc68000) || defined(_M_M68K) || \ + (defined(__MIPS__) && defined(__MISPEB__)) || \ + defined(__ppc__) || defined(__POWERPC__) || defined(_M_PPC) || \ + defined(__sparc__) +#define SDL_BYTEORDER SDL_BIG_ENDIAN +#else +#define SDL_BYTEORDER SDL_LIL_ENDIAN +#endif +#endif /* __linux __ */ +#endif /* !SDL_BYTEORDER */ + + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \file SDL_endian.h + */ +#if defined(__GNUC__) && defined(__i386__) && \ + !(__GNUC__ == 2 && __GNUC_MINOR__ == 95 /* broken gcc version */) +SDL_FORCE_INLINE Uint16 +SDL_Swap16(Uint16 x) +{ + __asm__("xchgb %b0,%h0": "=q"(x):"0"(x)); + return x; +} +#elif defined(__GNUC__) && defined(__x86_64__) +SDL_FORCE_INLINE Uint16 +SDL_Swap16(Uint16 x) +{ + __asm__("xchgb %b0,%h0": "=Q"(x):"0"(x)); + return x; +} +#elif defined(__GNUC__) && (defined(__powerpc__) || defined(__ppc__)) +SDL_FORCE_INLINE Uint16 +SDL_Swap16(Uint16 x) +{ + int result; + + __asm__("rlwimi %0,%2,8,16,23": "=&r"(result):"0"(x >> 8), "r"(x)); + return (Uint16)result; +} +#elif defined(__GNUC__) && (defined(__M68000__) || defined(__M68020__)) && !defined(__mcoldfire__) +SDL_FORCE_INLINE Uint16 +SDL_Swap16(Uint16 x) +{ + __asm__("rorw #8,%0": "=d"(x): "0"(x):"cc"); + return x; +} +#else +SDL_FORCE_INLINE Uint16 +SDL_Swap16(Uint16 x) +{ + return SDL_static_cast(Uint16, ((x << 8) | (x >> 8))); +} +#endif + +#if defined(__GNUC__) && defined(__i386__) +SDL_FORCE_INLINE Uint32 +SDL_Swap32(Uint32 x) +{ + __asm__("bswap %0": "=r"(x):"0"(x)); + return x; +} +#elif defined(__GNUC__) && defined(__x86_64__) +SDL_FORCE_INLINE Uint32 +SDL_Swap32(Uint32 x) +{ + __asm__("bswapl %0": "=r"(x):"0"(x)); + return x; +} +#elif defined(__GNUC__) && (defined(__powerpc__) || defined(__ppc__)) +SDL_FORCE_INLINE Uint32 +SDL_Swap32(Uint32 x) +{ + Uint32 result; + + __asm__("rlwimi %0,%2,24,16,23": "=&r"(result):"0"(x >> 24), "r"(x)); + __asm__("rlwimi %0,%2,8,8,15": "=&r"(result):"0"(result), "r"(x)); + __asm__("rlwimi %0,%2,24,0,7": "=&r"(result):"0"(result), "r"(x)); + return result; +} +#elif defined(__GNUC__) && (defined(__M68000__) || defined(__M68020__)) && !defined(__mcoldfire__) +SDL_FORCE_INLINE Uint32 +SDL_Swap32(Uint32 x) +{ + __asm__("rorw #8,%0\n\tswap %0\n\trorw #8,%0": "=d"(x): "0"(x):"cc"); + return x; +} +#else +SDL_FORCE_INLINE Uint32 +SDL_Swap32(Uint32 x) +{ + return SDL_static_cast(Uint32, ((x << 24) | ((x << 8) & 0x00FF0000) | + ((x >> 8) & 0x0000FF00) | (x >> 24))); +} +#endif + +#if defined(__GNUC__) && defined(__i386__) +SDL_FORCE_INLINE Uint64 +SDL_Swap64(Uint64 x) +{ + union + { + struct + { + Uint32 a, b; + } s; + Uint64 u; + } v; + v.u = x; + __asm__("bswapl %0 ; bswapl %1 ; xchgl %0,%1": "=r"(v.s.a), "=r"(v.s.b):"0"(v.s.a), + "1"(v.s. + b)); + return v.u; +} +#elif defined(__GNUC__) && defined(__x86_64__) +SDL_FORCE_INLINE Uint64 +SDL_Swap64(Uint64 x) +{ + __asm__("bswapq %0": "=r"(x):"0"(x)); + return x; +} +#else +SDL_FORCE_INLINE Uint64 +SDL_Swap64(Uint64 x) +{ + Uint32 hi, lo; + + /* Separate into high and low 32-bit values and swap them */ + lo = SDL_static_cast(Uint32, x & 0xFFFFFFFF); + x >>= 32; + hi = SDL_static_cast(Uint32, x & 0xFFFFFFFF); + x = SDL_Swap32(lo); + x <<= 32; + x |= SDL_Swap32(hi); + return (x); +} +#endif + + +SDL_FORCE_INLINE float +SDL_SwapFloat(float x) +{ + union + { + float f; + Uint32 ui32; + } swapper; + swapper.f = x; + swapper.ui32 = SDL_Swap32(swapper.ui32); + return swapper.f; +} + + +/** + * \name Swap to native + * Byteswap item from the specified endianness to the native endianness. + */ +/*@{*/ +#if SDL_BYTEORDER == SDL_LIL_ENDIAN +#define SDL_SwapLE16(X) (X) +#define SDL_SwapLE32(X) (X) +#define SDL_SwapLE64(X) (X) +#define SDL_SwapFloatLE(X) (X) +#define SDL_SwapBE16(X) SDL_Swap16(X) +#define SDL_SwapBE32(X) SDL_Swap32(X) +#define SDL_SwapBE64(X) SDL_Swap64(X) +#define SDL_SwapFloatBE(X) SDL_SwapFloat(X) +#else +#define SDL_SwapLE16(X) SDL_Swap16(X) +#define SDL_SwapLE32(X) SDL_Swap32(X) +#define SDL_SwapLE64(X) SDL_Swap64(X) +#define SDL_SwapFloatLE(X) SDL_SwapFloat(X) +#define SDL_SwapBE16(X) (X) +#define SDL_SwapBE32(X) (X) +#define SDL_SwapBE64(X) (X) +#define SDL_SwapFloatBE(X) (X) +#endif +/*@}*//*Swap to native*/ + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_endian_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_error.h b/src/SDL2/SDL_error.h new file mode 100644 index 000000000..229b26802 --- /dev/null +++ b/src/SDL2/SDL_error.h @@ -0,0 +1,76 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_error.h + * + * Simple error message routines for SDL. + */ + +#ifndef _SDL_error_h +#define _SDL_error_h + +#include "SDL_stdinc.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* Public functions */ +/* SDL_SetError() unconditionally returns -1. */ +extern DECLSPEC int SDLCALL SDL_SetError(const char *fmt, ...); +extern DECLSPEC const char *SDLCALL SDL_GetError(void); +extern DECLSPEC void SDLCALL SDL_ClearError(void); + +/** + * \name Internal error functions + * + * \internal + * Private error reporting function - used internally. + */ +/*@{*/ +#define SDL_OutOfMemory() SDL_Error(SDL_ENOMEM) +#define SDL_Unsupported() SDL_Error(SDL_UNSUPPORTED) +#define SDL_InvalidParamError(param) SDL_SetError("Parameter '%s' is invalid", (param)) +typedef enum +{ + SDL_ENOMEM, + SDL_EFREAD, + SDL_EFWRITE, + SDL_EFSEEK, + SDL_UNSUPPORTED, + SDL_LASTERROR +} SDL_errorcode; +/* SDL_Error() unconditionally returns -1. */ +extern DECLSPEC int SDLCALL SDL_Error(SDL_errorcode code); +/*@}*//*Internal error functions*/ + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_error_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_events.h b/src/SDL2/SDL_events.h new file mode 100644 index 000000000..b997b5ec8 --- /dev/null +++ b/src/SDL2/SDL_events.h @@ -0,0 +1,720 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_events.h + * + * Include file for SDL event handling. + */ + +#ifndef _SDL_events_h +#define _SDL_events_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_video.h" +#include "SDL_keyboard.h" +#include "SDL_mouse.h" +#include "SDL_joystick.h" +#include "SDL_gamecontroller.h" +#include "SDL_quit.h" +#include "SDL_gesture.h" +#include "SDL_touch.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* General keyboard/mouse state definitions */ +#define SDL_RELEASED 0 +#define SDL_PRESSED 1 + +/** + * \brief The types of events that can be delivered. + */ +typedef enum +{ + SDL_FIRSTEVENT = 0, /**< Unused (do not remove) */ + + /* Application events */ + SDL_QUIT = 0x100, /**< User-requested quit */ + + /* These application events have special meaning on iOS, see README-ios.txt for details */ + SDL_APP_TERMINATING, /**< The application is being terminated by the OS + Called on iOS in applicationWillTerminate() + Called on Android in onDestroy() + */ + SDL_APP_LOWMEMORY, /**< The application is low on memory, free memory if possible. + Called on iOS in applicationDidReceiveMemoryWarning() + Called on Android in onLowMemory() + */ + SDL_APP_WILLENTERBACKGROUND, /**< The application is about to enter the background + Called on iOS in applicationWillResignActive() + Called on Android in onPause() + */ + SDL_APP_DIDENTERBACKGROUND, /**< The application did enter the background and may not get CPU for some time + Called on iOS in applicationDidEnterBackground() + Called on Android in onPause() + */ + SDL_APP_WILLENTERFOREGROUND, /**< The application is about to enter the foreground + Called on iOS in applicationWillEnterForeground() + Called on Android in onResume() + */ + SDL_APP_DIDENTERFOREGROUND, /**< The application is now interactive + Called on iOS in applicationDidBecomeActive() + Called on Android in onResume() + */ + + /* Window events */ + SDL_WINDOWEVENT = 0x200, /**< Window state change */ + SDL_SYSWMEVENT, /**< System specific event */ + + /* Keyboard events */ + SDL_KEYDOWN = 0x300, /**< Key pressed */ + SDL_KEYUP, /**< Key released */ + SDL_TEXTEDITING, /**< Keyboard text editing (composition) */ + SDL_TEXTINPUT, /**< Keyboard text input */ + + /* Mouse events */ + SDL_MOUSEMOTION = 0x400, /**< Mouse moved */ + SDL_MOUSEBUTTONDOWN, /**< Mouse button pressed */ + SDL_MOUSEBUTTONUP, /**< Mouse button released */ + SDL_MOUSEWHEEL, /**< Mouse wheel motion */ + + /* Joystick events */ + SDL_JOYAXISMOTION = 0x600, /**< Joystick axis motion */ + SDL_JOYBALLMOTION, /**< Joystick trackball motion */ + SDL_JOYHATMOTION, /**< Joystick hat position change */ + SDL_JOYBUTTONDOWN, /**< Joystick button pressed */ + SDL_JOYBUTTONUP, /**< Joystick button released */ + SDL_JOYDEVICEADDED, /**< A new joystick has been inserted into the system */ + SDL_JOYDEVICEREMOVED, /**< An opened joystick has been removed */ + + /* Game controller events */ + SDL_CONTROLLERAXISMOTION = 0x650, /**< Game controller axis motion */ + SDL_CONTROLLERBUTTONDOWN, /**< Game controller button pressed */ + SDL_CONTROLLERBUTTONUP, /**< Game controller button released */ + SDL_CONTROLLERDEVICEADDED, /**< A new Game controller has been inserted into the system */ + SDL_CONTROLLERDEVICEREMOVED, /**< An opened Game controller has been removed */ + SDL_CONTROLLERDEVICEREMAPPED, /**< The controller mapping was updated */ + + /* Touch events */ + SDL_FINGERDOWN = 0x700, + SDL_FINGERUP, + SDL_FINGERMOTION, + + /* Gesture events */ + SDL_DOLLARGESTURE = 0x800, + SDL_DOLLARRECORD, + SDL_MULTIGESTURE, + + /* Clipboard events */ + SDL_CLIPBOARDUPDATE = 0x900, /**< The clipboard changed */ + + /* Drag and drop events */ + SDL_DROPFILE = 0x1000, /**< The system requests a file open */ + + /** Events ::SDL_USEREVENT through ::SDL_LASTEVENT are for your use, + * and should be allocated with SDL_RegisterEvents() + */ + SDL_USEREVENT = 0x8000, + + /** + * This last event is only for bounding internal arrays + */ + SDL_LASTEVENT = 0xFFFF +} SDL_EventType; + +/** + * \brief Fields shared by every event + */ +typedef struct SDL_CommonEvent +{ + Uint32 type; + Uint32 timestamp; +} SDL_CommonEvent; + +/** + * \brief Window state change event data (event.window.*) + */ +typedef struct SDL_WindowEvent +{ + Uint32 type; /**< ::SDL_WINDOWEVENT */ + Uint32 timestamp; + Uint32 windowID; /**< The associated window */ + Uint8 event; /**< ::SDL_WindowEventID */ + Uint8 padding1; + Uint8 padding2; + Uint8 padding3; + Sint32 data1; /**< event dependent data */ + Sint32 data2; /**< event dependent data */ +} SDL_WindowEvent; + +/** + * \brief Keyboard button event structure (event.key.*) + */ +typedef struct SDL_KeyboardEvent +{ + Uint32 type; /**< ::SDL_KEYDOWN or ::SDL_KEYUP */ + Uint32 timestamp; + Uint32 windowID; /**< The window with keyboard focus, if any */ + Uint8 state; /**< ::SDL_PRESSED or ::SDL_RELEASED */ + Uint8 repeat; /**< Non-zero if this is a key repeat */ + Uint8 padding2; + Uint8 padding3; + SDL_Keysym keysym; /**< The key that was pressed or released */ +} SDL_KeyboardEvent; + +#define SDL_TEXTEDITINGEVENT_TEXT_SIZE (32) +/** + * \brief Keyboard text editing event structure (event.edit.*) + */ +typedef struct SDL_TextEditingEvent +{ + Uint32 type; /**< ::SDL_TEXTEDITING */ + Uint32 timestamp; + Uint32 windowID; /**< The window with keyboard focus, if any */ + char text[SDL_TEXTEDITINGEVENT_TEXT_SIZE]; /**< The editing text */ + Sint32 start; /**< The start cursor of selected editing text */ + Sint32 length; /**< The length of selected editing text */ +} SDL_TextEditingEvent; + + +#define SDL_TEXTINPUTEVENT_TEXT_SIZE (32) +/** + * \brief Keyboard text input event structure (event.text.*) + */ +typedef struct SDL_TextInputEvent +{ + Uint32 type; /**< ::SDL_TEXTINPUT */ + Uint32 timestamp; + Uint32 windowID; /**< The window with keyboard focus, if any */ + char text[SDL_TEXTINPUTEVENT_TEXT_SIZE]; /**< The input text */ +} SDL_TextInputEvent; + +/** + * \brief Mouse motion event structure (event.motion.*) + */ +typedef struct SDL_MouseMotionEvent +{ + Uint32 type; /**< ::SDL_MOUSEMOTION */ + Uint32 timestamp; + Uint32 windowID; /**< The window with mouse focus, if any */ + Uint32 which; /**< The mouse instance id, or SDL_TOUCH_MOUSEID */ + Uint32 state; /**< The current button state */ + Sint32 x; /**< X coordinate, relative to window */ + Sint32 y; /**< Y coordinate, relative to window */ + Sint32 xrel; /**< The relative motion in the X direction */ + Sint32 yrel; /**< The relative motion in the Y direction */ +} SDL_MouseMotionEvent; + +/** + * \brief Mouse button event structure (event.button.*) + */ +typedef struct SDL_MouseButtonEvent +{ + Uint32 type; /**< ::SDL_MOUSEBUTTONDOWN or ::SDL_MOUSEBUTTONUP */ + Uint32 timestamp; + Uint32 windowID; /**< The window with mouse focus, if any */ + Uint32 which; /**< The mouse instance id, or SDL_TOUCH_MOUSEID */ + Uint8 button; /**< The mouse button index */ + Uint8 state; /**< ::SDL_PRESSED or ::SDL_RELEASED */ + Uint8 padding1; + Uint8 padding2; + Sint32 x; /**< X coordinate, relative to window */ + Sint32 y; /**< Y coordinate, relative to window */ +} SDL_MouseButtonEvent; + +/** + * \brief Mouse wheel event structure (event.wheel.*) + */ +typedef struct SDL_MouseWheelEvent +{ + Uint32 type; /**< ::SDL_MOUSEWHEEL */ + Uint32 timestamp; + Uint32 windowID; /**< The window with mouse focus, if any */ + Uint32 which; /**< The mouse instance id, or SDL_TOUCH_MOUSEID */ + Sint32 x; /**< The amount scrolled horizontally */ + Sint32 y; /**< The amount scrolled vertically */ +} SDL_MouseWheelEvent; + +/** + * \brief Joystick axis motion event structure (event.jaxis.*) + */ +typedef struct SDL_JoyAxisEvent +{ + Uint32 type; /**< ::SDL_JOYAXISMOTION */ + Uint32 timestamp; + SDL_JoystickID which; /**< The joystick instance id */ + Uint8 axis; /**< The joystick axis index */ + Uint8 padding1; + Uint8 padding2; + Uint8 padding3; + Sint16 value; /**< The axis value (range: -32768 to 32767) */ + Uint16 padding4; +} SDL_JoyAxisEvent; + +/** + * \brief Joystick trackball motion event structure (event.jball.*) + */ +typedef struct SDL_JoyBallEvent +{ + Uint32 type; /**< ::SDL_JOYBALLMOTION */ + Uint32 timestamp; + SDL_JoystickID which; /**< The joystick instance id */ + Uint8 ball; /**< The joystick trackball index */ + Uint8 padding1; + Uint8 padding2; + Uint8 padding3; + Sint16 xrel; /**< The relative motion in the X direction */ + Sint16 yrel; /**< The relative motion in the Y direction */ +} SDL_JoyBallEvent; + +/** + * \brief Joystick hat position change event structure (event.jhat.*) + */ +typedef struct SDL_JoyHatEvent +{ + Uint32 type; /**< ::SDL_JOYHATMOTION */ + Uint32 timestamp; + SDL_JoystickID which; /**< The joystick instance id */ + Uint8 hat; /**< The joystick hat index */ + Uint8 value; /**< The hat position value. + * \sa ::SDL_HAT_LEFTUP ::SDL_HAT_UP ::SDL_HAT_RIGHTUP + * \sa ::SDL_HAT_LEFT ::SDL_HAT_CENTERED ::SDL_HAT_RIGHT + * \sa ::SDL_HAT_LEFTDOWN ::SDL_HAT_DOWN ::SDL_HAT_RIGHTDOWN + * + * Note that zero means the POV is centered. + */ + Uint8 padding1; + Uint8 padding2; +} SDL_JoyHatEvent; + +/** + * \brief Joystick button event structure (event.jbutton.*) + */ +typedef struct SDL_JoyButtonEvent +{ + Uint32 type; /**< ::SDL_JOYBUTTONDOWN or ::SDL_JOYBUTTONUP */ + Uint32 timestamp; + SDL_JoystickID which; /**< The joystick instance id */ + Uint8 button; /**< The joystick button index */ + Uint8 state; /**< ::SDL_PRESSED or ::SDL_RELEASED */ + Uint8 padding1; + Uint8 padding2; +} SDL_JoyButtonEvent; + +/** + * \brief Joystick device event structure (event.jdevice.*) + */ +typedef struct SDL_JoyDeviceEvent +{ + Uint32 type; /**< ::SDL_JOYDEVICEADDED or ::SDL_JOYDEVICEREMOVED */ + Uint32 timestamp; + Sint32 which; /**< The joystick device index for the ADDED event, instance id for the REMOVED event */ +} SDL_JoyDeviceEvent; + + +/** + * \brief Game controller axis motion event structure (event.caxis.*) + */ +typedef struct SDL_ControllerAxisEvent +{ + Uint32 type; /**< ::SDL_CONTROLLERAXISMOTION */ + Uint32 timestamp; + SDL_JoystickID which; /**< The joystick instance id */ + Uint8 axis; /**< The controller axis (SDL_GameControllerAxis) */ + Uint8 padding1; + Uint8 padding2; + Uint8 padding3; + Sint16 value; /**< The axis value (range: -32768 to 32767) */ + Uint16 padding4; +} SDL_ControllerAxisEvent; + + +/** + * \brief Game controller button event structure (event.cbutton.*) + */ +typedef struct SDL_ControllerButtonEvent +{ + Uint32 type; /**< ::SDL_CONTROLLERBUTTONDOWN or ::SDL_CONTROLLERBUTTONUP */ + Uint32 timestamp; + SDL_JoystickID which; /**< The joystick instance id */ + Uint8 button; /**< The controller button (SDL_GameControllerButton) */ + Uint8 state; /**< ::SDL_PRESSED or ::SDL_RELEASED */ + Uint8 padding1; + Uint8 padding2; +} SDL_ControllerButtonEvent; + + +/** + * \brief Controller device event structure (event.cdevice.*) + */ +typedef struct SDL_ControllerDeviceEvent +{ + Uint32 type; /**< ::SDL_CONTROLLERDEVICEADDED, ::SDL_CONTROLLERDEVICEREMOVED, or ::SDL_CONTROLLERDEVICEREMAPPED */ + Uint32 timestamp; + Sint32 which; /**< The joystick device index for the ADDED event, instance id for the REMOVED or REMAPPED event */ +} SDL_ControllerDeviceEvent; + + +/** + * \brief Touch finger event structure (event.tfinger.*) + */ +typedef struct SDL_TouchFingerEvent +{ + Uint32 type; /**< ::SDL_FINGERMOTION or ::SDL_FINGERDOWN or ::SDL_FINGERUP */ + Uint32 timestamp; + SDL_TouchID touchId; /**< The touch device id */ + SDL_FingerID fingerId; + float x; /**< Normalized in the range 0...1 */ + float y; /**< Normalized in the range 0...1 */ + float dx; /**< Normalized in the range 0...1 */ + float dy; /**< Normalized in the range 0...1 */ + float pressure; /**< Normalized in the range 0...1 */ +} SDL_TouchFingerEvent; + + +/** + * \brief Multiple Finger Gesture Event (event.mgesture.*) + */ +typedef struct SDL_MultiGestureEvent +{ + Uint32 type; /**< ::SDL_MULTIGESTURE */ + Uint32 timestamp; + SDL_TouchID touchId; /**< The touch device index */ + float dTheta; + float dDist; + float x; + float y; + Uint16 numFingers; + Uint16 padding; +} SDL_MultiGestureEvent; + + +/** + * \brief Dollar Gesture Event (event.dgesture.*) + */ +typedef struct SDL_DollarGestureEvent +{ + Uint32 type; /**< ::SDL_DOLLARGESTURE */ + Uint32 timestamp; + SDL_TouchID touchId; /**< The touch device id */ + SDL_GestureID gestureId; + Uint32 numFingers; + float error; + float x; /**< Normalized center of gesture */ + float y; /**< Normalized center of gesture */ +} SDL_DollarGestureEvent; + + +/** + * \brief An event used to request a file open by the system (event.drop.*) + * This event is disabled by default, you can enable it with SDL_EventState() + * \note If you enable this event, you must free the filename in the event. + */ +typedef struct SDL_DropEvent +{ + Uint32 type; /**< ::SDL_DROPFILE */ + Uint32 timestamp; + char *file; /**< The file name, which should be freed with SDL_free() */ +} SDL_DropEvent; + + +/** + * \brief The "quit requested" event + */ +typedef struct SDL_QuitEvent +{ + Uint32 type; /**< ::SDL_QUIT */ + Uint32 timestamp; +} SDL_QuitEvent; + +/** + * \brief OS Specific event + */ +typedef struct SDL_OSEvent +{ + Uint32 type; /**< ::SDL_QUIT */ + Uint32 timestamp; +} SDL_OSEvent; + +/** + * \brief A user-defined event type (event.user.*) + */ +typedef struct SDL_UserEvent +{ + Uint32 type; /**< ::SDL_USEREVENT through ::SDL_LASTEVENT-1 */ + Uint32 timestamp; + Uint32 windowID; /**< The associated window if any */ + Sint32 code; /**< User defined event code */ + void *data1; /**< User defined data pointer */ + void *data2; /**< User defined data pointer */ +} SDL_UserEvent; + + +struct SDL_SysWMmsg; +typedef struct SDL_SysWMmsg SDL_SysWMmsg; + +/** + * \brief A video driver dependent system event (event.syswm.*) + * This event is disabled by default, you can enable it with SDL_EventState() + * + * \note If you want to use this event, you should include SDL_syswm.h. + */ +typedef struct SDL_SysWMEvent +{ + Uint32 type; /**< ::SDL_SYSWMEVENT */ + Uint32 timestamp; + SDL_SysWMmsg *msg; /**< driver dependent data, defined in SDL_syswm.h */ +} SDL_SysWMEvent; + +/** + * \brief General event structure + */ +typedef union SDL_Event +{ + Uint32 type; /**< Event type, shared with all events */ + SDL_CommonEvent common; /**< Common event data */ + SDL_WindowEvent window; /**< Window event data */ + SDL_KeyboardEvent key; /**< Keyboard event data */ + SDL_TextEditingEvent edit; /**< Text editing event data */ + SDL_TextInputEvent text; /**< Text input event data */ + SDL_MouseMotionEvent motion; /**< Mouse motion event data */ + SDL_MouseButtonEvent button; /**< Mouse button event data */ + SDL_MouseWheelEvent wheel; /**< Mouse wheel event data */ + SDL_JoyAxisEvent jaxis; /**< Joystick axis event data */ + SDL_JoyBallEvent jball; /**< Joystick ball event data */ + SDL_JoyHatEvent jhat; /**< Joystick hat event data */ + SDL_JoyButtonEvent jbutton; /**< Joystick button event data */ + SDL_JoyDeviceEvent jdevice; /**< Joystick device change event data */ + SDL_ControllerAxisEvent caxis; /**< Game Controller axis event data */ + SDL_ControllerButtonEvent cbutton; /**< Game Controller button event data */ + SDL_ControllerDeviceEvent cdevice; /**< Game Controller device event data */ + SDL_QuitEvent quit; /**< Quit request event data */ + SDL_UserEvent user; /**< Custom event data */ + SDL_SysWMEvent syswm; /**< System dependent window event data */ + SDL_TouchFingerEvent tfinger; /**< Touch finger event data */ + SDL_MultiGestureEvent mgesture; /**< Gesture event data */ + SDL_DollarGestureEvent dgesture; /**< Gesture event data */ + SDL_DropEvent drop; /**< Drag and drop event data */ + + /* This is necessary for ABI compatibility between Visual C++ and GCC + Visual C++ will respect the push pack pragma and use 52 bytes for + this structure, and GCC will use the alignment of the largest datatype + within the union, which is 8 bytes. + + So... we'll add padding to force the size to be 56 bytes for both. + */ + Uint8 padding[56]; +} SDL_Event; + + +/* Function prototypes */ + +/** + * Pumps the event loop, gathering events from the input devices. + * + * This function updates the event queue and internal input device state. + * + * This should only be run in the thread that sets the video mode. + */ +extern DECLSPEC void SDLCALL SDL_PumpEvents(void); + +/*@{*/ +typedef enum +{ + SDL_ADDEVENT, + SDL_PEEKEVENT, + SDL_GETEVENT +} SDL_eventaction; + +/** + * Checks the event queue for messages and optionally returns them. + * + * If \c action is ::SDL_ADDEVENT, up to \c numevents events will be added to + * the back of the event queue. + * + * If \c action is ::SDL_PEEKEVENT, up to \c numevents events at the front + * of the event queue, within the specified minimum and maximum type, + * will be returned and will not be removed from the queue. + * + * If \c action is ::SDL_GETEVENT, up to \c numevents events at the front + * of the event queue, within the specified minimum and maximum type, + * will be returned and will be removed from the queue. + * + * \return The number of events actually stored, or -1 if there was an error. + * + * This function is thread-safe. + */ +extern DECLSPEC int SDLCALL SDL_PeepEvents(SDL_Event * events, int numevents, + SDL_eventaction action, + Uint32 minType, Uint32 maxType); +/*@}*/ + +/** + * Checks to see if certain event types are in the event queue. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasEvent(Uint32 type); +extern DECLSPEC SDL_bool SDLCALL SDL_HasEvents(Uint32 minType, Uint32 maxType); + +/** + * This function clears events from the event queue + */ +extern DECLSPEC void SDLCALL SDL_FlushEvent(Uint32 type); +extern DECLSPEC void SDLCALL SDL_FlushEvents(Uint32 minType, Uint32 maxType); + +/** + * \brief Polls for currently pending events. + * + * \return 1 if there are any pending events, or 0 if there are none available. + * + * \param event If not NULL, the next event is removed from the queue and + * stored in that area. + */ +extern DECLSPEC int SDLCALL SDL_PollEvent(SDL_Event * event); + +/** + * \brief Waits indefinitely for the next available event. + * + * \return 1, or 0 if there was an error while waiting for events. + * + * \param event If not NULL, the next event is removed from the queue and + * stored in that area. + */ +extern DECLSPEC int SDLCALL SDL_WaitEvent(SDL_Event * event); + +/** + * \brief Waits until the specified timeout (in milliseconds) for the next + * available event. + * + * \return 1, or 0 if there was an error while waiting for events. + * + * \param event If not NULL, the next event is removed from the queue and + * stored in that area. + * \param timeout The timeout (in milliseconds) to wait for next event. + */ +extern DECLSPEC int SDLCALL SDL_WaitEventTimeout(SDL_Event * event, + int timeout); + +/** + * \brief Add an event to the event queue. + * + * \return 1 on success, 0 if the event was filtered, or -1 if the event queue + * was full or there was some other error. + */ +extern DECLSPEC int SDLCALL SDL_PushEvent(SDL_Event * event); + +typedef int (SDLCALL * SDL_EventFilter) (void *userdata, SDL_Event * event); + +/** + * Sets up a filter to process all events before they change internal state and + * are posted to the internal event queue. + * + * The filter is prototyped as: + * \code + * int SDL_EventFilter(void *userdata, SDL_Event * event); + * \endcode + * + * If the filter returns 1, then the event will be added to the internal queue. + * If it returns 0, then the event will be dropped from the queue, but the + * internal state will still be updated. This allows selective filtering of + * dynamically arriving events. + * + * \warning Be very careful of what you do in the event filter function, as + * it may run in a different thread! + * + * There is one caveat when dealing with the ::SDL_QuitEvent event type. The + * event filter is only called when the window manager desires to close the + * application window. If the event filter returns 1, then the window will + * be closed, otherwise the window will remain open if possible. + * + * If the quit event is generated by an interrupt signal, it will bypass the + * internal queue and be delivered to the application at the next event poll. + */ +extern DECLSPEC void SDLCALL SDL_SetEventFilter(SDL_EventFilter filter, + void *userdata); + +/** + * Return the current event filter - can be used to "chain" filters. + * If there is no event filter set, this function returns SDL_FALSE. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_GetEventFilter(SDL_EventFilter * filter, + void **userdata); + +/** + * Add a function which is called when an event is added to the queue. + */ +extern DECLSPEC void SDLCALL SDL_AddEventWatch(SDL_EventFilter filter, + void *userdata); + +/** + * Remove an event watch function added with SDL_AddEventWatch() + */ +extern DECLSPEC void SDLCALL SDL_DelEventWatch(SDL_EventFilter filter, + void *userdata); + +/** + * Run the filter function on the current event queue, removing any + * events for which the filter returns 0. + */ +extern DECLSPEC void SDLCALL SDL_FilterEvents(SDL_EventFilter filter, + void *userdata); + +/*@{*/ +#define SDL_QUERY -1 +#define SDL_IGNORE 0 +#define SDL_DISABLE 0 +#define SDL_ENABLE 1 + +/** + * This function allows you to set the state of processing certain events. + * - If \c state is set to ::SDL_IGNORE, that event will be automatically + * dropped from the event queue and will not event be filtered. + * - If \c state is set to ::SDL_ENABLE, that event will be processed + * normally. + * - If \c state is set to ::SDL_QUERY, SDL_EventState() will return the + * current processing state of the specified event. + */ +extern DECLSPEC Uint8 SDLCALL SDL_EventState(Uint32 type, int state); +/*@}*/ +#define SDL_GetEventState(type) SDL_EventState(type, SDL_QUERY) + +/** + * This function allocates a set of user-defined events, and returns + * the beginning event number for that set of events. + * + * If there aren't enough user-defined events left, this function + * returns (Uint32)-1 + */ +extern DECLSPEC Uint32 SDLCALL SDL_RegisterEvents(int numevents); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_events_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_gamecontroller.h b/src/SDL2/SDL_gamecontroller.h new file mode 100644 index 000000000..e55749ce3 --- /dev/null +++ b/src/SDL2/SDL_gamecontroller.h @@ -0,0 +1,298 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_gamecontroller.h + * + * Include file for SDL game controller event handling + */ + +#ifndef _SDL_gamecontroller_h +#define _SDL_gamecontroller_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_joystick.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \file SDL_gamecontroller.h + * + * In order to use these functions, SDL_Init() must have been called + * with the ::SDL_INIT_JOYSTICK flag. This causes SDL to scan the system + * for game controllers, and load appropriate drivers. + * + * If you would like to receive controller updates while the application + * is in the background, you should set the following hint before calling + * SDL_Init(): SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS + */ + +/* The gamecontroller structure used to identify an SDL game controller */ +struct _SDL_GameController; +typedef struct _SDL_GameController SDL_GameController; + + +typedef enum +{ + SDL_CONTROLLER_BINDTYPE_NONE = 0, + SDL_CONTROLLER_BINDTYPE_BUTTON, + SDL_CONTROLLER_BINDTYPE_AXIS, + SDL_CONTROLLER_BINDTYPE_HAT +} SDL_GameControllerBindType; + +/** + * Get the SDL joystick layer binding for this controller button/axis mapping + */ +typedef struct SDL_GameControllerButtonBind +{ + SDL_GameControllerBindType bindType; + union + { + int button; + int axis; + struct { + int hat; + int hat_mask; + } hat; + } value; + +} SDL_GameControllerButtonBind; + + +/** + * To count the number of game controllers in the system for the following: + * int nJoysticks = SDL_NumJoysticks(); + * int nGameControllers = 0; + * for ( int i = 0; i < nJoysticks; i++ ) { + * if ( SDL_IsGameController(i) ) { + * nGameControllers++; + * } + * } + * + * Using the SDL_HINT_GAMECONTROLLERCONFIG hint or the SDL_GameControllerAddMapping you can add support for controllers SDL is unaware of or cause an existing controller to have a different binding. The format is: + * guid,name,mappings + * + * Where GUID is the string value from SDL_JoystickGetGUIDString(), name is the human readable string for the device and mappings are controller mappings to joystick ones. + * Under Windows there is a reserved GUID of "xinput" that covers any XInput devices. + * The mapping format for joystick is: + * bX - a joystick button, index X + * hX.Y - hat X with value Y + * aX - axis X of the joystick + * Buttons can be used as a controller axis and vice versa. + * + * This string shows an example of a valid mapping for a controller + * "341a3608000000000000504944564944,Afterglow PS3 Controller,a:b1,b:b2,y:b3,x:b0,start:b9,guide:b12,back:b8,dpup:h0.1,dpleft:h0.8,dpdown:h0.4,dpright:h0.2,leftshoulder:b4,rightshoulder:b5,leftstick:b10,rightstick:b11,leftx:a0,lefty:a1,rightx:a2,righty:a3,lefttrigger:b6,righttrigger:b7", + * + */ + +/** + * Add or update an existing mapping configuration + * + * \return 1 if mapping is added, 0 if updated, -1 on error + */ +extern DECLSPEC int SDLCALL SDL_GameControllerAddMapping( const char* mappingString ); + +/** + * Get a mapping string for a GUID + * + * \return the mapping string. Must be freed with SDL_free. Returns NULL if no mapping is available + */ +extern DECLSPEC char * SDLCALL SDL_GameControllerMappingForGUID( SDL_JoystickGUID guid ); + +/** + * Get a mapping string for an open GameController + * + * \return the mapping string. Must be freed with SDL_free. Returns NULL if no mapping is available + */ +extern DECLSPEC char * SDLCALL SDL_GameControllerMapping( SDL_GameController * gamecontroller ); + +/** + * Is the joystick on this index supported by the game controller interface? + */ +extern DECLSPEC SDL_bool SDLCALL SDL_IsGameController(int joystick_index); + + +/** + * Get the implementation dependent name of a game controller. + * This can be called before any controllers are opened. + * If no name can be found, this function returns NULL. + */ +extern DECLSPEC const char *SDLCALL SDL_GameControllerNameForIndex(int joystick_index); + +/** + * Open a game controller for use. + * The index passed as an argument refers to the N'th game controller on the system. + * This index is the value which will identify this controller in future controller + * events. + * + * \return A controller identifier, or NULL if an error occurred. + */ +extern DECLSPEC SDL_GameController *SDLCALL SDL_GameControllerOpen(int joystick_index); + +/** + * Return the name for this currently opened controller + */ +extern DECLSPEC const char *SDLCALL SDL_GameControllerName(SDL_GameController *gamecontroller); + +/** + * Returns SDL_TRUE if the controller has been opened and currently connected, + * or SDL_FALSE if it has not. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_GameControllerGetAttached(SDL_GameController *gamecontroller); + +/** + * Get the underlying joystick object used by a controller + */ +extern DECLSPEC SDL_Joystick *SDLCALL SDL_GameControllerGetJoystick(SDL_GameController *gamecontroller); + +/** + * Enable/disable controller event polling. + * + * If controller events are disabled, you must call SDL_GameControllerUpdate() + * yourself and check the state of the controller when you want controller + * information. + * + * The state can be one of ::SDL_QUERY, ::SDL_ENABLE or ::SDL_IGNORE. + */ +extern DECLSPEC int SDLCALL SDL_GameControllerEventState(int state); + +/** + * Update the current state of the open game controllers. + * + * This is called automatically by the event loop if any game controller + * events are enabled. + */ +extern DECLSPEC void SDLCALL SDL_GameControllerUpdate(void); + + +/** + * The list of axes available from a controller + */ +typedef enum +{ + SDL_CONTROLLER_AXIS_INVALID = -1, + SDL_CONTROLLER_AXIS_LEFTX, + SDL_CONTROLLER_AXIS_LEFTY, + SDL_CONTROLLER_AXIS_RIGHTX, + SDL_CONTROLLER_AXIS_RIGHTY, + SDL_CONTROLLER_AXIS_TRIGGERLEFT, + SDL_CONTROLLER_AXIS_TRIGGERRIGHT, + SDL_CONTROLLER_AXIS_MAX +} SDL_GameControllerAxis; + +/** + * turn this string into a axis mapping + */ +extern DECLSPEC SDL_GameControllerAxis SDLCALL SDL_GameControllerGetAxisFromString(const char *pchString); + +/** + * turn this axis enum into a string mapping + */ +extern DECLSPEC const char* SDLCALL SDL_GameControllerGetStringForAxis(SDL_GameControllerAxis axis); + +/** + * Get the SDL joystick layer binding for this controller button mapping + */ +extern DECLSPEC SDL_GameControllerButtonBind SDLCALL +SDL_GameControllerGetBindForAxis(SDL_GameController *gamecontroller, + SDL_GameControllerAxis axis); + +/** + * Get the current state of an axis control on a game controller. + * + * The state is a value ranging from -32768 to 32767. + * + * The axis indices start at index 0. + */ +extern DECLSPEC Sint16 SDLCALL +SDL_GameControllerGetAxis(SDL_GameController *gamecontroller, + SDL_GameControllerAxis axis); + +/** + * The list of buttons available from a controller + */ +typedef enum +{ + SDL_CONTROLLER_BUTTON_INVALID = -1, + SDL_CONTROLLER_BUTTON_A, + SDL_CONTROLLER_BUTTON_B, + SDL_CONTROLLER_BUTTON_X, + SDL_CONTROLLER_BUTTON_Y, + SDL_CONTROLLER_BUTTON_BACK, + SDL_CONTROLLER_BUTTON_GUIDE, + SDL_CONTROLLER_BUTTON_START, + SDL_CONTROLLER_BUTTON_LEFTSTICK, + SDL_CONTROLLER_BUTTON_RIGHTSTICK, + SDL_CONTROLLER_BUTTON_LEFTSHOULDER, + SDL_CONTROLLER_BUTTON_RIGHTSHOULDER, + SDL_CONTROLLER_BUTTON_DPAD_UP, + SDL_CONTROLLER_BUTTON_DPAD_DOWN, + SDL_CONTROLLER_BUTTON_DPAD_LEFT, + SDL_CONTROLLER_BUTTON_DPAD_RIGHT, + SDL_CONTROLLER_BUTTON_MAX +} SDL_GameControllerButton; + +/** + * turn this string into a button mapping + */ +extern DECLSPEC SDL_GameControllerButton SDLCALL SDL_GameControllerGetButtonFromString(const char *pchString); + +/** + * turn this button enum into a string mapping + */ +extern DECLSPEC const char* SDLCALL SDL_GameControllerGetStringForButton(SDL_GameControllerButton button); + +/** + * Get the SDL joystick layer binding for this controller button mapping + */ +extern DECLSPEC SDL_GameControllerButtonBind SDLCALL +SDL_GameControllerGetBindForButton(SDL_GameController *gamecontroller, + SDL_GameControllerButton button); + + +/** + * Get the current state of a button on a game controller. + * + * The button indices start at index 0. + */ +extern DECLSPEC Uint8 SDLCALL SDL_GameControllerGetButton(SDL_GameController *gamecontroller, + SDL_GameControllerButton button); + +/** + * Close a controller previously opened with SDL_GameControllerOpen(). + */ +extern DECLSPEC void SDLCALL SDL_GameControllerClose(SDL_GameController *gamecontroller); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_gamecontroller_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_gesture.h b/src/SDL2/SDL_gesture.h new file mode 100644 index 000000000..21f10ead7 --- /dev/null +++ b/src/SDL2/SDL_gesture.h @@ -0,0 +1,87 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_gesture.h + * + * Include file for SDL gesture event handling. + */ + +#ifndef _SDL_gesture_h +#define _SDL_gesture_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_video.h" + +#include "SDL_touch.h" + + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +typedef Sint64 SDL_GestureID; + +/* Function prototypes */ + +/** + * \brief Begin Recording a gesture on the specified touch, or all touches (-1) + * + * + */ +extern DECLSPEC int SDLCALL SDL_RecordGesture(SDL_TouchID touchId); + + +/** + * \brief Save all currently loaded Dollar Gesture templates + * + * + */ +extern DECLSPEC int SDLCALL SDL_SaveAllDollarTemplates(SDL_RWops *src); + +/** + * \brief Save a currently loaded Dollar Gesture template + * + * + */ +extern DECLSPEC int SDLCALL SDL_SaveDollarTemplate(SDL_GestureID gestureId,SDL_RWops *src); + + +/** + * \brief Load Dollar Gesture templates from a file + * + * + */ +extern DECLSPEC int SDLCALL SDL_LoadDollarTemplates(SDL_TouchID touchId, SDL_RWops *src); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_gesture_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_haptic.h b/src/SDL2/SDL_haptic.h new file mode 100644 index 000000000..da555c9c3 --- /dev/null +++ b/src/SDL2/SDL_haptic.h @@ -0,0 +1,1225 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_haptic.h + * + * \brief The SDL Haptic subsystem allows you to control haptic (force feedback) + * devices. + * + * The basic usage is as follows: + * - Initialize the Subsystem (::SDL_INIT_HAPTIC). + * - Open a Haptic Device. + * - SDL_HapticOpen() to open from index. + * - SDL_HapticOpenFromJoystick() to open from an existing joystick. + * - Create an effect (::SDL_HapticEffect). + * - Upload the effect with SDL_HapticNewEffect(). + * - Run the effect with SDL_HapticRunEffect(). + * - (optional) Free the effect with SDL_HapticDestroyEffect(). + * - Close the haptic device with SDL_HapticClose(). + * + * \par Simple rumble example: + * \code + * SDL_Haptic *haptic; + * + * // Open the device + * haptic = SDL_HapticOpen( 0 ); + * if (haptic == NULL) + * return -1; + * + * // Initialize simple rumble + * if (SDL_HapticRumbleInit( haptic ) != 0) + * return -1; + * + * // Play effect at 50% strength for 2 seconds + * if (SDL_HapticRumblePlay( haptic, 0.5, 2000 ) != 0) + * return -1; + * SDL_Delay( 2000 ); + * + * // Clean up + * SDL_HapticClose( haptic ); + * \endcode + * + * \par Complete example: + * \code + * int test_haptic( SDL_Joystick * joystick ) { + * SDL_Haptic *haptic; + * SDL_HapticEffect effect; + * int effect_id; + * + * // Open the device + * haptic = SDL_HapticOpenFromJoystick( joystick ); + * if (haptic == NULL) return -1; // Most likely joystick isn't haptic + * + * // See if it can do sine waves + * if ((SDL_HapticQuery(haptic) & SDL_HAPTIC_SINE)==0) { + * SDL_HapticClose(haptic); // No sine effect + * return -1; + * } + * + * // Create the effect + * memset( &effect, 0, sizeof(SDL_HapticEffect) ); // 0 is safe default + * effect.type = SDL_HAPTIC_SINE; + * effect.periodic.direction.type = SDL_HAPTIC_POLAR; // Polar coordinates + * effect.periodic.direction.dir[0] = 18000; // Force comes from south + * effect.periodic.period = 1000; // 1000 ms + * effect.periodic.magnitude = 20000; // 20000/32767 strength + * effect.periodic.length = 5000; // 5 seconds long + * effect.periodic.attack_length = 1000; // Takes 1 second to get max strength + * effect.periodic.fade_length = 1000; // Takes 1 second to fade away + * + * // Upload the effect + * effect_id = SDL_HapticNewEffect( haptic, &effect ); + * + * // Test the effect + * SDL_HapticRunEffect( haptic, effect_id, 1 ); + * SDL_Delay( 5000); // Wait for the effect to finish + * + * // We destroy the effect, although closing the device also does this + * SDL_HapticDestroyEffect( haptic, effect_id ); + * + * // Close the device + * SDL_HapticClose(haptic); + * + * return 0; // Success + * } + * \endcode + * + * You can also find out more information on my blog: + * http://bobbens.dyndns.org/journal/2010/sdl_haptic/ + * + * \author Edgar Simo Serra + */ + +#ifndef _SDL_haptic_h +#define _SDL_haptic_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_joystick.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/** + * \typedef SDL_Haptic + * + * \brief The haptic structure used to identify an SDL haptic. + * + * \sa SDL_HapticOpen + * \sa SDL_HapticOpenFromJoystick + * \sa SDL_HapticClose + */ +struct _SDL_Haptic; +typedef struct _SDL_Haptic SDL_Haptic; + + +/** + * \name Haptic features + * + * Different haptic features a device can have. + */ +/*@{*/ + +/** + * \name Haptic effects + */ +/*@{*/ + +/** + * \brief Constant effect supported. + * + * Constant haptic effect. + * + * \sa SDL_HapticCondition + */ +#define SDL_HAPTIC_CONSTANT (1<<0) + +/** + * \brief Sine wave effect supported. + * + * Periodic haptic effect that simulates sine waves. + * + * \sa SDL_HapticPeriodic + */ +#define SDL_HAPTIC_SINE (1<<1) + +/** + * \brief Left/Right effect supported. + * + * Haptic effect for direct control over high/low frequency motors. + * + * \sa SDL_HapticLeftRight + * \warning this value was SDL_HAPTIC_SQUARE right before 2.0.0 shipped. Sorry, + * we ran out of bits, and this is important for XInput devices. + */ +#define SDL_HAPTIC_LEFTRIGHT (1<<2) + +/* !!! FIXME: put this back when we have more bits in 2.1 */ +/*#define SDL_HAPTIC_SQUARE (1<<2)*/ + +/** + * \brief Triangle wave effect supported. + * + * Periodic haptic effect that simulates triangular waves. + * + * \sa SDL_HapticPeriodic + */ +#define SDL_HAPTIC_TRIANGLE (1<<3) + +/** + * \brief Sawtoothup wave effect supported. + * + * Periodic haptic effect that simulates saw tooth up waves. + * + * \sa SDL_HapticPeriodic + */ +#define SDL_HAPTIC_SAWTOOTHUP (1<<4) + +/** + * \brief Sawtoothdown wave effect supported. + * + * Periodic haptic effect that simulates saw tooth down waves. + * + * \sa SDL_HapticPeriodic + */ +#define SDL_HAPTIC_SAWTOOTHDOWN (1<<5) + +/** + * \brief Ramp effect supported. + * + * Ramp haptic effect. + * + * \sa SDL_HapticRamp + */ +#define SDL_HAPTIC_RAMP (1<<6) + +/** + * \brief Spring effect supported - uses axes position. + * + * Condition haptic effect that simulates a spring. Effect is based on the + * axes position. + * + * \sa SDL_HapticCondition + */ +#define SDL_HAPTIC_SPRING (1<<7) + +/** + * \brief Damper effect supported - uses axes velocity. + * + * Condition haptic effect that simulates dampening. Effect is based on the + * axes velocity. + * + * \sa SDL_HapticCondition + */ +#define SDL_HAPTIC_DAMPER (1<<8) + +/** + * \brief Inertia effect supported - uses axes acceleration. + * + * Condition haptic effect that simulates inertia. Effect is based on the axes + * acceleration. + * + * \sa SDL_HapticCondition + */ +#define SDL_HAPTIC_INERTIA (1<<9) + +/** + * \brief Friction effect supported - uses axes movement. + * + * Condition haptic effect that simulates friction. Effect is based on the + * axes movement. + * + * \sa SDL_HapticCondition + */ +#define SDL_HAPTIC_FRICTION (1<<10) + +/** + * \brief Custom effect is supported. + * + * User defined custom haptic effect. + */ +#define SDL_HAPTIC_CUSTOM (1<<11) + +/*@}*//*Haptic effects*/ + +/* These last few are features the device has, not effects */ + +/** + * \brief Device can set global gain. + * + * Device supports setting the global gain. + * + * \sa SDL_HapticSetGain + */ +#define SDL_HAPTIC_GAIN (1<<12) + +/** + * \brief Device can set autocenter. + * + * Device supports setting autocenter. + * + * \sa SDL_HapticSetAutocenter + */ +#define SDL_HAPTIC_AUTOCENTER (1<<13) + +/** + * \brief Device can be queried for effect status. + * + * Device can be queried for effect status. + * + * \sa SDL_HapticGetEffectStatus + */ +#define SDL_HAPTIC_STATUS (1<<14) + +/** + * \brief Device can be paused. + * + * \sa SDL_HapticPause + * \sa SDL_HapticUnpause + */ +#define SDL_HAPTIC_PAUSE (1<<15) + + +/** + * \name Direction encodings + */ +/*@{*/ + +/** + * \brief Uses polar coordinates for the direction. + * + * \sa SDL_HapticDirection + */ +#define SDL_HAPTIC_POLAR 0 + +/** + * \brief Uses cartesian coordinates for the direction. + * + * \sa SDL_HapticDirection + */ +#define SDL_HAPTIC_CARTESIAN 1 + +/** + * \brief Uses spherical coordinates for the direction. + * + * \sa SDL_HapticDirection + */ +#define SDL_HAPTIC_SPHERICAL 2 + +/*@}*//*Direction encodings*/ + +/*@}*//*Haptic features*/ + +/* + * Misc defines. + */ + +/** + * \brief Used to play a device an infinite number of times. + * + * \sa SDL_HapticRunEffect + */ +#define SDL_HAPTIC_INFINITY 4294967295U + + +/** + * \brief Structure that represents a haptic direction. + * + * Directions can be specified by: + * - ::SDL_HAPTIC_POLAR : Specified by polar coordinates. + * - ::SDL_HAPTIC_CARTESIAN : Specified by cartesian coordinates. + * - ::SDL_HAPTIC_SPHERICAL : Specified by spherical coordinates. + * + * Cardinal directions of the haptic device are relative to the positioning + * of the device. North is considered to be away from the user. + * + * The following diagram represents the cardinal directions: + * \verbatim + .--. + |__| .-------. + |=.| |.-----.| + |--| || || + | | |'-----'| + |__|~')_____(' + [ COMPUTER ] + + + North (0,-1) + ^ + | + | + (1,0) West <----[ HAPTIC ]----> East (-1,0) + | + | + v + South (0,1) + + + [ USER ] + \|||/ + (o o) + ---ooO-(_)-Ooo--- + \endverbatim + * + * If type is ::SDL_HAPTIC_POLAR, direction is encoded by hundredths of a + * degree starting north and turning clockwise. ::SDL_HAPTIC_POLAR only uses + * the first \c dir parameter. The cardinal directions would be: + * - North: 0 (0 degrees) + * - East: 9000 (90 degrees) + * - South: 18000 (180 degrees) + * - West: 27000 (270 degrees) + * + * If type is ::SDL_HAPTIC_CARTESIAN, direction is encoded by three positions + * (X axis, Y axis and Z axis (with 3 axes)). ::SDL_HAPTIC_CARTESIAN uses + * the first three \c dir parameters. The cardinal directions would be: + * - North: 0,-1, 0 + * - East: -1, 0, 0 + * - South: 0, 1, 0 + * - West: 1, 0, 0 + * + * The Z axis represents the height of the effect if supported, otherwise + * it's unused. In cartesian encoding (1, 2) would be the same as (2, 4), you + * can use any multiple you want, only the direction matters. + * + * If type is ::SDL_HAPTIC_SPHERICAL, direction is encoded by two rotations. + * The first two \c dir parameters are used. The \c dir parameters are as + * follows (all values are in hundredths of degrees): + * - Degrees from (1, 0) rotated towards (0, 1). + * - Degrees towards (0, 0, 1) (device needs at least 3 axes). + * + * + * Example of force coming from the south with all encodings (force coming + * from the south means the user will have to pull the stick to counteract): + * \code + * SDL_HapticDirection direction; + * + * // Cartesian directions + * direction.type = SDL_HAPTIC_CARTESIAN; // Using cartesian direction encoding. + * direction.dir[0] = 0; // X position + * direction.dir[1] = 1; // Y position + * // Assuming the device has 2 axes, we don't need to specify third parameter. + * + * // Polar directions + * direction.type = SDL_HAPTIC_POLAR; // We'll be using polar direction encoding. + * direction.dir[0] = 18000; // Polar only uses first parameter + * + * // Spherical coordinates + * direction.type = SDL_HAPTIC_SPHERICAL; // Spherical encoding + * direction.dir[0] = 9000; // Since we only have two axes we don't need more parameters. + * \endcode + * + * \sa SDL_HAPTIC_POLAR + * \sa SDL_HAPTIC_CARTESIAN + * \sa SDL_HAPTIC_SPHERICAL + * \sa SDL_HapticEffect + * \sa SDL_HapticNumAxes + */ +typedef struct SDL_HapticDirection +{ + Uint8 type; /**< The type of encoding. */ + Sint32 dir[3]; /**< The encoded direction. */ +} SDL_HapticDirection; + + +/** + * \brief A structure containing a template for a Constant effect. + * + * The struct is exclusive to the ::SDL_HAPTIC_CONSTANT effect. + * + * A constant effect applies a constant force in the specified direction + * to the joystick. + * + * \sa SDL_HAPTIC_CONSTANT + * \sa SDL_HapticEffect + */ +typedef struct SDL_HapticConstant +{ + /* Header */ + Uint16 type; /**< ::SDL_HAPTIC_CONSTANT */ + SDL_HapticDirection direction; /**< Direction of the effect. */ + + /* Replay */ + Uint32 length; /**< Duration of the effect. */ + Uint16 delay; /**< Delay before starting the effect. */ + + /* Trigger */ + Uint16 button; /**< Button that triggers the effect. */ + Uint16 interval; /**< How soon it can be triggered again after button. */ + + /* Constant */ + Sint16 level; /**< Strength of the constant effect. */ + + /* Envelope */ + Uint16 attack_length; /**< Duration of the attack. */ + Uint16 attack_level; /**< Level at the start of the attack. */ + Uint16 fade_length; /**< Duration of the fade. */ + Uint16 fade_level; /**< Level at the end of the fade. */ +} SDL_HapticConstant; + +/** + * \brief A structure containing a template for a Periodic effect. + * + * The struct handles the following effects: + * - ::SDL_HAPTIC_SINE + * - ::SDL_HAPTIC_LEFTRIGHT + * - ::SDL_HAPTIC_TRIANGLE + * - ::SDL_HAPTIC_SAWTOOTHUP + * - ::SDL_HAPTIC_SAWTOOTHDOWN + * + * A periodic effect consists in a wave-shaped effect that repeats itself + * over time. The type determines the shape of the wave and the parameters + * determine the dimensions of the wave. + * + * Phase is given by hundredth of a cycle meaning that giving the phase a value + * of 9000 will displace it 25% of its period. Here are sample values: + * - 0: No phase displacement. + * - 9000: Displaced 25% of its period. + * - 18000: Displaced 50% of its period. + * - 27000: Displaced 75% of its period. + * - 36000: Displaced 100% of its period, same as 0, but 0 is preferred. + * + * Examples: + * \verbatim + SDL_HAPTIC_SINE + __ __ __ __ + / \ / \ / \ / + / \__/ \__/ \__/ + + SDL_HAPTIC_SQUARE + __ __ __ __ __ + | | | | | | | | | | + | |__| |__| |__| |__| | + + SDL_HAPTIC_TRIANGLE + /\ /\ /\ /\ /\ + / \ / \ / \ / \ / + / \/ \/ \/ \/ + + SDL_HAPTIC_SAWTOOTHUP + /| /| /| /| /| /| /| + / | / | / | / | / | / | / | + / |/ |/ |/ |/ |/ |/ | + + SDL_HAPTIC_SAWTOOTHDOWN + \ |\ |\ |\ |\ |\ |\ | + \ | \ | \ | \ | \ | \ | \ | + \| \| \| \| \| \| \| + \endverbatim + * + * \sa SDL_HAPTIC_SINE + * \sa SDL_HAPTIC_LEFTRIGHT + * \sa SDL_HAPTIC_TRIANGLE + * \sa SDL_HAPTIC_SAWTOOTHUP + * \sa SDL_HAPTIC_SAWTOOTHDOWN + * \sa SDL_HapticEffect + */ +typedef struct SDL_HapticPeriodic +{ + /* Header */ + Uint16 type; /**< ::SDL_HAPTIC_SINE, ::SDL_HAPTIC_LEFTRIGHT, + ::SDL_HAPTIC_TRIANGLE, ::SDL_HAPTIC_SAWTOOTHUP or + ::SDL_HAPTIC_SAWTOOTHDOWN */ + SDL_HapticDirection direction; /**< Direction of the effect. */ + + /* Replay */ + Uint32 length; /**< Duration of the effect. */ + Uint16 delay; /**< Delay before starting the effect. */ + + /* Trigger */ + Uint16 button; /**< Button that triggers the effect. */ + Uint16 interval; /**< How soon it can be triggered again after button. */ + + /* Periodic */ + Uint16 period; /**< Period of the wave. */ + Sint16 magnitude; /**< Peak value. */ + Sint16 offset; /**< Mean value of the wave. */ + Uint16 phase; /**< Horizontal shift given by hundredth of a cycle. */ + + /* Envelope */ + Uint16 attack_length; /**< Duration of the attack. */ + Uint16 attack_level; /**< Level at the start of the attack. */ + Uint16 fade_length; /**< Duration of the fade. */ + Uint16 fade_level; /**< Level at the end of the fade. */ +} SDL_HapticPeriodic; + +/** + * \brief A structure containing a template for a Condition effect. + * + * The struct handles the following effects: + * - ::SDL_HAPTIC_SPRING: Effect based on axes position. + * - ::SDL_HAPTIC_DAMPER: Effect based on axes velocity. + * - ::SDL_HAPTIC_INERTIA: Effect based on axes acceleration. + * - ::SDL_HAPTIC_FRICTION: Effect based on axes movement. + * + * Direction is handled by condition internals instead of a direction member. + * The condition effect specific members have three parameters. The first + * refers to the X axis, the second refers to the Y axis and the third + * refers to the Z axis. The right terms refer to the positive side of the + * axis and the left terms refer to the negative side of the axis. Please + * refer to the ::SDL_HapticDirection diagram for which side is positive and + * which is negative. + * + * \sa SDL_HapticDirection + * \sa SDL_HAPTIC_SPRING + * \sa SDL_HAPTIC_DAMPER + * \sa SDL_HAPTIC_INERTIA + * \sa SDL_HAPTIC_FRICTION + * \sa SDL_HapticEffect + */ +typedef struct SDL_HapticCondition +{ + /* Header */ + Uint16 type; /**< ::SDL_HAPTIC_SPRING, ::SDL_HAPTIC_DAMPER, + ::SDL_HAPTIC_INERTIA or ::SDL_HAPTIC_FRICTION */ + SDL_HapticDirection direction; /**< Direction of the effect - Not used ATM. */ + + /* Replay */ + Uint32 length; /**< Duration of the effect. */ + Uint16 delay; /**< Delay before starting the effect. */ + + /* Trigger */ + Uint16 button; /**< Button that triggers the effect. */ + Uint16 interval; /**< How soon it can be triggered again after button. */ + + /* Condition */ + Uint16 right_sat[3]; /**< Level when joystick is to the positive side. */ + Uint16 left_sat[3]; /**< Level when joystick is to the negative side. */ + Sint16 right_coeff[3]; /**< How fast to increase the force towards the positive side. */ + Sint16 left_coeff[3]; /**< How fast to increase the force towards the negative side. */ + Uint16 deadband[3]; /**< Size of the dead zone. */ + Sint16 center[3]; /**< Position of the dead zone. */ +} SDL_HapticCondition; + +/** + * \brief A structure containing a template for a Ramp effect. + * + * This struct is exclusively for the ::SDL_HAPTIC_RAMP effect. + * + * The ramp effect starts at start strength and ends at end strength. + * It augments in linear fashion. If you use attack and fade with a ramp + * the effects get added to the ramp effect making the effect become + * quadratic instead of linear. + * + * \sa SDL_HAPTIC_RAMP + * \sa SDL_HapticEffect + */ +typedef struct SDL_HapticRamp +{ + /* Header */ + Uint16 type; /**< ::SDL_HAPTIC_RAMP */ + SDL_HapticDirection direction; /**< Direction of the effect. */ + + /* Replay */ + Uint32 length; /**< Duration of the effect. */ + Uint16 delay; /**< Delay before starting the effect. */ + + /* Trigger */ + Uint16 button; /**< Button that triggers the effect. */ + Uint16 interval; /**< How soon it can be triggered again after button. */ + + /* Ramp */ + Sint16 start; /**< Beginning strength level. */ + Sint16 end; /**< Ending strength level. */ + + /* Envelope */ + Uint16 attack_length; /**< Duration of the attack. */ + Uint16 attack_level; /**< Level at the start of the attack. */ + Uint16 fade_length; /**< Duration of the fade. */ + Uint16 fade_level; /**< Level at the end of the fade. */ +} SDL_HapticRamp; + +/** + * \brief A structure containing a template for a Left/Right effect. + * + * This struct is exclusively for the ::SDL_HAPTIC_LEFTRIGHT effect. + * + * The Left/Right effect is used to explicitly control the large and small + * motors, commonly found in modern game controllers. One motor is high + * frequency, the other is low frequency. + * + * \sa SDL_HAPTIC_LEFTRIGHT + * \sa SDL_HapticEffect + */ +typedef struct SDL_HapticLeftRight +{ + /* Header */ + Uint16 type; /**< ::SDL_HAPTIC_LEFTRIGHT */ + + /* Replay */ + Uint32 length; /**< Duration of the effect. */ + + /* Rumble */ + Uint16 large_magnitude; /**< Control of the large controller motor. */ + Uint16 small_magnitude; /**< Control of the small controller motor. */ +} SDL_HapticLeftRight; + +/** + * \brief A structure containing a template for the ::SDL_HAPTIC_CUSTOM effect. + * + * A custom force feedback effect is much like a periodic effect, where the + * application can define its exact shape. You will have to allocate the + * data yourself. Data should consist of channels * samples Uint16 samples. + * + * If channels is one, the effect is rotated using the defined direction. + * Otherwise it uses the samples in data for the different axes. + * + * \sa SDL_HAPTIC_CUSTOM + * \sa SDL_HapticEffect + */ +typedef struct SDL_HapticCustom +{ + /* Header */ + Uint16 type; /**< ::SDL_HAPTIC_CUSTOM */ + SDL_HapticDirection direction; /**< Direction of the effect. */ + + /* Replay */ + Uint32 length; /**< Duration of the effect. */ + Uint16 delay; /**< Delay before starting the effect. */ + + /* Trigger */ + Uint16 button; /**< Button that triggers the effect. */ + Uint16 interval; /**< How soon it can be triggered again after button. */ + + /* Custom */ + Uint8 channels; /**< Axes to use, minimum of one. */ + Uint16 period; /**< Sample periods. */ + Uint16 samples; /**< Amount of samples. */ + Uint16 *data; /**< Should contain channels*samples items. */ + + /* Envelope */ + Uint16 attack_length; /**< Duration of the attack. */ + Uint16 attack_level; /**< Level at the start of the attack. */ + Uint16 fade_length; /**< Duration of the fade. */ + Uint16 fade_level; /**< Level at the end of the fade. */ +} SDL_HapticCustom; + +/** + * \brief The generic template for any haptic effect. + * + * All values max at 32767 (0x7FFF). Signed values also can be negative. + * Time values unless specified otherwise are in milliseconds. + * + * You can also pass ::SDL_HAPTIC_INFINITY to length instead of a 0-32767 + * value. Neither delay, interval, attack_length nor fade_length support + * ::SDL_HAPTIC_INFINITY. Fade will also not be used since effect never ends. + * + * Additionally, the ::SDL_HAPTIC_RAMP effect does not support a duration of + * ::SDL_HAPTIC_INFINITY. + * + * Button triggers may not be supported on all devices, it is advised to not + * use them if possible. Buttons start at index 1 instead of index 0 like + * the joystick. + * + * If both attack_length and fade_level are 0, the envelope is not used, + * otherwise both values are used. + * + * Common parts: + * \code + * // Replay - All effects have this + * Uint32 length; // Duration of effect (ms). + * Uint16 delay; // Delay before starting effect. + * + * // Trigger - All effects have this + * Uint16 button; // Button that triggers effect. + * Uint16 interval; // How soon before effect can be triggered again. + * + * // Envelope - All effects except condition effects have this + * Uint16 attack_length; // Duration of the attack (ms). + * Uint16 attack_level; // Level at the start of the attack. + * Uint16 fade_length; // Duration of the fade out (ms). + * Uint16 fade_level; // Level at the end of the fade. + * \endcode + * + * + * Here we have an example of a constant effect evolution in time: + * \verbatim + Strength + ^ + | + | effect level --> _________________ + | / \ + | / \ + | / \ + | / \ + | attack_level --> | \ + | | | <--- fade_level + | + +--------------------------------------------------> Time + [--] [---] + attack_length fade_length + + [------------------][-----------------------] + delay length + \endverbatim + * + * Note either the attack_level or the fade_level may be above the actual + * effect level. + * + * \sa SDL_HapticConstant + * \sa SDL_HapticPeriodic + * \sa SDL_HapticCondition + * \sa SDL_HapticRamp + * \sa SDL_HapticLeftRight + * \sa SDL_HapticCustom + */ +typedef union SDL_HapticEffect +{ + /* Common for all force feedback effects */ + Uint16 type; /**< Effect type. */ + SDL_HapticConstant constant; /**< Constant effect. */ + SDL_HapticPeriodic periodic; /**< Periodic effect. */ + SDL_HapticCondition condition; /**< Condition effect. */ + SDL_HapticRamp ramp; /**< Ramp effect. */ + SDL_HapticLeftRight leftright; /**< Left/Right effect. */ + SDL_HapticCustom custom; /**< Custom effect. */ +} SDL_HapticEffect; + + +/* Function prototypes */ +/** + * \brief Count the number of haptic devices attached to the system. + * + * \return Number of haptic devices detected on the system. + */ +extern DECLSPEC int SDLCALL SDL_NumHaptics(void); + +/** + * \brief Get the implementation dependent name of a Haptic device. + * + * This can be called before any joysticks are opened. + * If no name can be found, this function returns NULL. + * + * \param device_index Index of the device to get its name. + * \return Name of the device or NULL on error. + * + * \sa SDL_NumHaptics + */ +extern DECLSPEC const char *SDLCALL SDL_HapticName(int device_index); + +/** + * \brief Opens a Haptic device for usage. + * + * The index passed as an argument refers to the N'th Haptic device on this + * system. + * + * When opening a haptic device, its gain will be set to maximum and + * autocenter will be disabled. To modify these values use + * SDL_HapticSetGain() and SDL_HapticSetAutocenter(). + * + * \param device_index Index of the device to open. + * \return Device identifier or NULL on error. + * + * \sa SDL_HapticIndex + * \sa SDL_HapticOpenFromMouse + * \sa SDL_HapticOpenFromJoystick + * \sa SDL_HapticClose + * \sa SDL_HapticSetGain + * \sa SDL_HapticSetAutocenter + * \sa SDL_HapticPause + * \sa SDL_HapticStopAll + */ +extern DECLSPEC SDL_Haptic *SDLCALL SDL_HapticOpen(int device_index); + +/** + * \brief Checks if the haptic device at index has been opened. + * + * \param device_index Index to check to see if it has been opened. + * \return 1 if it has been opened or 0 if it hasn't. + * + * \sa SDL_HapticOpen + * \sa SDL_HapticIndex + */ +extern DECLSPEC int SDLCALL SDL_HapticOpened(int device_index); + +/** + * \brief Gets the index of a haptic device. + * + * \param haptic Haptic device to get the index of. + * \return The index of the haptic device or -1 on error. + * + * \sa SDL_HapticOpen + * \sa SDL_HapticOpened + */ +extern DECLSPEC int SDLCALL SDL_HapticIndex(SDL_Haptic * haptic); + +/** + * \brief Gets whether or not the current mouse has haptic capabilities. + * + * \return SDL_TRUE if the mouse is haptic, SDL_FALSE if it isn't. + * + * \sa SDL_HapticOpenFromMouse + */ +extern DECLSPEC int SDLCALL SDL_MouseIsHaptic(void); + +/** + * \brief Tries to open a haptic device from the current mouse. + * + * \return The haptic device identifier or NULL on error. + * + * \sa SDL_MouseIsHaptic + * \sa SDL_HapticOpen + */ +extern DECLSPEC SDL_Haptic *SDLCALL SDL_HapticOpenFromMouse(void); + +/** + * \brief Checks to see if a joystick has haptic features. + * + * \param joystick Joystick to test for haptic capabilities. + * \return 1 if the joystick is haptic, 0 if it isn't + * or -1 if an error ocurred. + * + * \sa SDL_HapticOpenFromJoystick + */ +extern DECLSPEC int SDLCALL SDL_JoystickIsHaptic(SDL_Joystick * joystick); + +/** + * \brief Opens a Haptic device for usage from a Joystick device. + * + * You must still close the haptic device seperately. It will not be closed + * with the joystick. + * + * When opening from a joystick you should first close the haptic device before + * closing the joystick device. If not, on some implementations the haptic + * device will also get unallocated and you'll be unable to use force feedback + * on that device. + * + * \param joystick Joystick to create a haptic device from. + * \return A valid haptic device identifier on success or NULL on error. + * + * \sa SDL_HapticOpen + * \sa SDL_HapticClose + */ +extern DECLSPEC SDL_Haptic *SDLCALL SDL_HapticOpenFromJoystick(SDL_Joystick * + joystick); + +/** + * \brief Closes a Haptic device previously opened with SDL_HapticOpen(). + * + * \param haptic Haptic device to close. + */ +extern DECLSPEC void SDLCALL SDL_HapticClose(SDL_Haptic * haptic); + +/** + * \brief Returns the number of effects a haptic device can store. + * + * On some platforms this isn't fully supported, and therefore is an + * approximation. Always check to see if your created effect was actually + * created and do not rely solely on SDL_HapticNumEffects(). + * + * \param haptic The haptic device to query effect max. + * \return The number of effects the haptic device can store or + * -1 on error. + * + * \sa SDL_HapticNumEffectsPlaying + * \sa SDL_HapticQuery + */ +extern DECLSPEC int SDLCALL SDL_HapticNumEffects(SDL_Haptic * haptic); + +/** + * \brief Returns the number of effects a haptic device can play at the same + * time. + * + * This is not supported on all platforms, but will always return a value. + * Added here for the sake of completeness. + * + * \param haptic The haptic device to query maximum playing effects. + * \return The number of effects the haptic device can play at the same time + * or -1 on error. + * + * \sa SDL_HapticNumEffects + * \sa SDL_HapticQuery + */ +extern DECLSPEC int SDLCALL SDL_HapticNumEffectsPlaying(SDL_Haptic * haptic); + +/** + * \brief Gets the haptic devices supported features in bitwise matter. + * + * Example: + * \code + * if (SDL_HapticQuery(haptic) & SDL_HAPTIC_CONSTANT) { + * printf("We have constant haptic effect!"); + * } + * \endcode + * + * \param haptic The haptic device to query. + * \return Haptic features in bitwise manner (OR'd). + * + * \sa SDL_HapticNumEffects + * \sa SDL_HapticEffectSupported + */ +extern DECLSPEC unsigned int SDLCALL SDL_HapticQuery(SDL_Haptic * haptic); + + +/** + * \brief Gets the number of haptic axes the device has. + * + * \sa SDL_HapticDirection + */ +extern DECLSPEC int SDLCALL SDL_HapticNumAxes(SDL_Haptic * haptic); + +/** + * \brief Checks to see if effect is supported by haptic. + * + * \param haptic Haptic device to check on. + * \param effect Effect to check to see if it is supported. + * \return SDL_TRUE if effect is supported, SDL_FALSE if it isn't or -1 on error. + * + * \sa SDL_HapticQuery + * \sa SDL_HapticNewEffect + */ +extern DECLSPEC int SDLCALL SDL_HapticEffectSupported(SDL_Haptic * haptic, + SDL_HapticEffect * + effect); + +/** + * \brief Creates a new haptic effect on the device. + * + * \param haptic Haptic device to create the effect on. + * \param effect Properties of the effect to create. + * \return The id of the effect on success or -1 on error. + * + * \sa SDL_HapticUpdateEffect + * \sa SDL_HapticRunEffect + * \sa SDL_HapticDestroyEffect + */ +extern DECLSPEC int SDLCALL SDL_HapticNewEffect(SDL_Haptic * haptic, + SDL_HapticEffect * effect); + +/** + * \brief Updates the properties of an effect. + * + * Can be used dynamically, although behaviour when dynamically changing + * direction may be strange. Specifically the effect may reupload itself + * and start playing from the start. You cannot change the type either when + * running SDL_HapticUpdateEffect(). + * + * \param haptic Haptic device that has the effect. + * \param effect Effect to update. + * \param data New effect properties to use. + * \return 0 on success or -1 on error. + * + * \sa SDL_HapticNewEffect + * \sa SDL_HapticRunEffect + * \sa SDL_HapticDestroyEffect + */ +extern DECLSPEC int SDLCALL SDL_HapticUpdateEffect(SDL_Haptic * haptic, + int effect, + SDL_HapticEffect * data); + +/** + * \brief Runs the haptic effect on its associated haptic device. + * + * If iterations are ::SDL_HAPTIC_INFINITY, it'll run the effect over and over + * repeating the envelope (attack and fade) every time. If you only want the + * effect to last forever, set ::SDL_HAPTIC_INFINITY in the effect's length + * parameter. + * + * \param haptic Haptic device to run the effect on. + * \param effect Identifier of the haptic effect to run. + * \param iterations Number of iterations to run the effect. Use + * ::SDL_HAPTIC_INFINITY for infinity. + * \return 0 on success or -1 on error. + * + * \sa SDL_HapticStopEffect + * \sa SDL_HapticDestroyEffect + * \sa SDL_HapticGetEffectStatus + */ +extern DECLSPEC int SDLCALL SDL_HapticRunEffect(SDL_Haptic * haptic, + int effect, + Uint32 iterations); + +/** + * \brief Stops the haptic effect on its associated haptic device. + * + * \param haptic Haptic device to stop the effect on. + * \param effect Identifier of the effect to stop. + * \return 0 on success or -1 on error. + * + * \sa SDL_HapticRunEffect + * \sa SDL_HapticDestroyEffect + */ +extern DECLSPEC int SDLCALL SDL_HapticStopEffect(SDL_Haptic * haptic, + int effect); + +/** + * \brief Destroys a haptic effect on the device. + * + * This will stop the effect if it's running. Effects are automatically + * destroyed when the device is closed. + * + * \param haptic Device to destroy the effect on. + * \param effect Identifier of the effect to destroy. + * + * \sa SDL_HapticNewEffect + */ +extern DECLSPEC void SDLCALL SDL_HapticDestroyEffect(SDL_Haptic * haptic, + int effect); + +/** + * \brief Gets the status of the current effect on the haptic device. + * + * Device must support the ::SDL_HAPTIC_STATUS feature. + * + * \param haptic Haptic device to query the effect status on. + * \param effect Identifier of the effect to query its status. + * \return 0 if it isn't playing, 1 if it is playing or -1 on error. + * + * \sa SDL_HapticRunEffect + * \sa SDL_HapticStopEffect + */ +extern DECLSPEC int SDLCALL SDL_HapticGetEffectStatus(SDL_Haptic * haptic, + int effect); + +/** + * \brief Sets the global gain of the device. + * + * Device must support the ::SDL_HAPTIC_GAIN feature. + * + * The user may specify the maximum gain by setting the environment variable + * SDL_HAPTIC_GAIN_MAX which should be between 0 and 100. All calls to + * SDL_HapticSetGain() will scale linearly using SDL_HAPTIC_GAIN_MAX as the + * maximum. + * + * \param haptic Haptic device to set the gain on. + * \param gain Value to set the gain to, should be between 0 and 100. + * \return 0 on success or -1 on error. + * + * \sa SDL_HapticQuery + */ +extern DECLSPEC int SDLCALL SDL_HapticSetGain(SDL_Haptic * haptic, int gain); + +/** + * \brief Sets the global autocenter of the device. + * + * Autocenter should be between 0 and 100. Setting it to 0 will disable + * autocentering. + * + * Device must support the ::SDL_HAPTIC_AUTOCENTER feature. + * + * \param haptic Haptic device to set autocentering on. + * \param autocenter Value to set autocenter to, 0 disables autocentering. + * \return 0 on success or -1 on error. + * + * \sa SDL_HapticQuery + */ +extern DECLSPEC int SDLCALL SDL_HapticSetAutocenter(SDL_Haptic * haptic, + int autocenter); + +/** + * \brief Pauses a haptic device. + * + * Device must support the ::SDL_HAPTIC_PAUSE feature. Call + * SDL_HapticUnpause() to resume playback. + * + * Do not modify the effects nor add new ones while the device is paused. + * That can cause all sorts of weird errors. + * + * \param haptic Haptic device to pause. + * \return 0 on success or -1 on error. + * + * \sa SDL_HapticUnpause + */ +extern DECLSPEC int SDLCALL SDL_HapticPause(SDL_Haptic * haptic); + +/** + * \brief Unpauses a haptic device. + * + * Call to unpause after SDL_HapticPause(). + * + * \param haptic Haptic device to pause. + * \return 0 on success or -1 on error. + * + * \sa SDL_HapticPause + */ +extern DECLSPEC int SDLCALL SDL_HapticUnpause(SDL_Haptic * haptic); + +/** + * \brief Stops all the currently playing effects on a haptic device. + * + * \param haptic Haptic device to stop. + * \return 0 on success or -1 on error. + */ +extern DECLSPEC int SDLCALL SDL_HapticStopAll(SDL_Haptic * haptic); + +/** + * \brief Checks to see if rumble is supported on a haptic device. + * + * \param haptic Haptic device to check to see if it supports rumble. + * \return SDL_TRUE if effect is supported, SDL_FALSE if it isn't or -1 on error. + * + * \sa SDL_HapticRumbleInit + * \sa SDL_HapticRumblePlay + * \sa SDL_HapticRumbleStop + */ +extern DECLSPEC int SDLCALL SDL_HapticRumbleSupported(SDL_Haptic * haptic); + +/** + * \brief Initializes the haptic device for simple rumble playback. + * + * \param haptic Haptic device to initialize for simple rumble playback. + * \return 0 on success or -1 on error. + * + * \sa SDL_HapticOpen + * \sa SDL_HapticRumbleSupported + * \sa SDL_HapticRumblePlay + * \sa SDL_HapticRumbleStop + */ +extern DECLSPEC int SDLCALL SDL_HapticRumbleInit(SDL_Haptic * haptic); + +/** + * \brief Runs simple rumble on a haptic device + * + * \param haptic Haptic device to play rumble effect on. + * \param strength Strength of the rumble to play as a 0-1 float value. + * \param length Length of the rumble to play in milliseconds. + * \return 0 on success or -1 on error. + * + * \sa SDL_HapticRumbleSupported + * \sa SDL_HapticRumbleInit + * \sa SDL_HapticRumbleStop + */ +extern DECLSPEC int SDLCALL SDL_HapticRumblePlay(SDL_Haptic * haptic, float strength, Uint32 length ); + +/** + * \brief Stops the simple rumble on a haptic device. + * + * \param haptic Haptic to stop the rumble on. + * \return 0 on success or -1 on error. + * + * \sa SDL_HapticRumbleSupported + * \sa SDL_HapticRumbleInit + * \sa SDL_HapticRumblePlay + */ +extern DECLSPEC int SDLCALL SDL_HapticRumbleStop(SDL_Haptic * haptic); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_haptic_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_hints.h b/src/SDL2/SDL_hints.h new file mode 100644 index 000000000..74b63ee09 --- /dev/null +++ b/src/SDL2/SDL_hints.h @@ -0,0 +1,339 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_hints.h + * + * Official documentation for SDL configuration variables + * + * This file contains functions to set and get configuration hints, + * as well as listing each of them alphabetically. + * + * The convention for naming hints is SDL_HINT_X, where "SDL_X" is + * the environment variable that can be used to override the default. + * + * In general these hints are just that - they may or may not be + * supported or applicable on any given platform, but they provide + * a way for an application or user to give the library a hint as + * to how they would like the library to work. + */ + +#ifndef _SDL_hints_h +#define _SDL_hints_h + +#include "SDL_stdinc.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief A variable controlling how 3D acceleration is used to accelerate the SDL screen surface. + * + * SDL can try to accelerate the SDL screen surface by using streaming + * textures with a 3D rendering engine. This variable controls whether and + * how this is done. + * + * This variable can be set to the following values: + * "0" - Disable 3D acceleration + * "1" - Enable 3D acceleration, using the default renderer. + * "X" - Enable 3D acceleration, using X where X is one of the valid rendering drivers. (e.g. "direct3d", "opengl", etc.) + * + * By default SDL tries to make a best guess for each platform whether + * to use acceleration or not. + */ +#define SDL_HINT_FRAMEBUFFER_ACCELERATION "SDL_FRAMEBUFFER_ACCELERATION" + +/** + * \brief A variable specifying which render driver to use. + * + * If the application doesn't pick a specific renderer to use, this variable + * specifies the name of the preferred renderer. If the preferred renderer + * can't be initialized, the normal default renderer is used. + * + * This variable is case insensitive and can be set to the following values: + * "direct3d" + * "opengl" + * "opengles2" + * "opengles" + * "software" + * + * The default varies by platform, but it's the first one in the list that + * is available on the current platform. + */ +#define SDL_HINT_RENDER_DRIVER "SDL_RENDER_DRIVER" + +/** + * \brief A variable controlling whether the OpenGL render driver uses shaders if they are available. + * + * This variable can be set to the following values: + * "0" - Disable shaders + * "1" - Enable shaders + * + * By default shaders are used if OpenGL supports them. + */ +#define SDL_HINT_RENDER_OPENGL_SHADERS "SDL_RENDER_OPENGL_SHADERS" + +/** + * \brief A variable controlling the scaling quality + * + * This variable can be set to the following values: + * "0" or "nearest" - Nearest pixel sampling + * "1" or "linear" - Linear filtering (supported by OpenGL and Direct3D) + * "2" or "best" - Currently this is the same as "linear" + * + * By default nearest pixel sampling is used + */ +#define SDL_HINT_RENDER_SCALE_QUALITY "SDL_RENDER_SCALE_QUALITY" + +/** + * \brief A variable controlling whether updates to the SDL screen surface should be synchronized with the vertical refresh, to avoid tearing. + * + * This variable can be set to the following values: + * "0" - Disable vsync + * "1" - Enable vsync + * + * By default SDL does not sync screen surface updates with vertical refresh. + */ +#define SDL_HINT_RENDER_VSYNC "SDL_RENDER_VSYNC" + +/** + * \brief A variable controlling whether the X11 VidMode extension should be used. + * + * This variable can be set to the following values: + * "0" - Disable XVidMode + * "1" - Enable XVidMode + * + * By default SDL will use XVidMode if it is available. + */ +#define SDL_HINT_VIDEO_X11_XVIDMODE "SDL_VIDEO_X11_XVIDMODE" + +/** + * \brief A variable controlling whether the X11 Xinerama extension should be used. + * + * This variable can be set to the following values: + * "0" - Disable Xinerama + * "1" - Enable Xinerama + * + * By default SDL will use Xinerama if it is available. + */ +#define SDL_HINT_VIDEO_X11_XINERAMA "SDL_VIDEO_X11_XINERAMA" + +/** + * \brief A variable controlling whether the X11 XRandR extension should be used. + * + * This variable can be set to the following values: + * "0" - Disable XRandR + * "1" - Enable XRandR + * + * By default SDL will not use XRandR because of window manager issues. + */ +#define SDL_HINT_VIDEO_X11_XRANDR "SDL_VIDEO_X11_XRANDR" + +/** + * \brief A variable controlling whether grabbing input grabs the keyboard + * + * This variable can be set to the following values: + * "0" - Grab will affect only the mouse + * "1" - Grab will affect mouse and keyboard + * + * By default SDL will not grab the keyboard so system shortcuts still work. + */ +#define SDL_HINT_GRAB_KEYBOARD "SDL_GRAB_KEYBOARD" + +/** + * \brief Minimize your SDL_Window if it loses key focus when in Fullscreen mode. Defaults to true. + * + */ +#define SDL_HINT_VIDEO_MINIMIZE_ON_FOCUS_LOSS "SDL_VIDEO_MINIMIZE_ON_FOCUS_LOSS" + + +/** + * \brief A variable controlling whether the idle timer is disabled on iOS. + * + * When an iOS app does not receive touches for some time, the screen is + * dimmed automatically. For games where the accelerometer is the only input + * this is problematic. This functionality can be disabled by setting this + * hint. + * + * This variable can be set to the following values: + * "0" - Enable idle timer + * "1" - Disable idle timer + */ +#define SDL_HINT_IDLE_TIMER_DISABLED "SDL_IOS_IDLE_TIMER_DISABLED" + +/** + * \brief A variable controlling which orientations are allowed on iOS. + * + * In some circumstances it is necessary to be able to explicitly control + * which UI orientations are allowed. + * + * This variable is a space delimited list of the following values: + * "LandscapeLeft", "LandscapeRight", "Portrait" "PortraitUpsideDown" + */ +#define SDL_HINT_ORIENTATIONS "SDL_IOS_ORIENTATIONS" + + +/** + * \brief A variable that lets you disable the detection and use of Xinput gamepad devices + * + * The variable can be set to the following values: + * "0" - Disable XInput timer (only uses direct input) + * "1" - Enable XInput timer (the default) + */ +#define SDL_HINT_XINPUT_ENABLED "SDL_XINPUT_ENABLED" + + +/** + * \brief A variable that lets you manually hint extra gamecontroller db entries + * + * The variable should be newline delimited rows of gamecontroller config data, see SDL_gamecontroller.h + * + * This hint must be set before calling SDL_Init(SDL_INIT_GAMECONTROLLER) + * You can update mappings after the system is initialized with SDL_GameControllerMappingForGUID() and SDL_GameControllerAddMapping() + */ +#define SDL_HINT_GAMECONTROLLERCONFIG "SDL_GAMECONTROLLERCONFIG" + + +/** + * \brief A variable that lets you enable joystick (and gamecontroller) events even when your app is in the background. + * + * The variable can be set to the following values: + * "0" - Disable joystick & gamecontroller input events when the + * application is in the background. + * "1" - Enable joystick & gamecontroller input events when the + * application is in the backgroumd. + * + * The default value is "0". This hint may be set at any time. + */ +#define SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS "SDL_JOYSTICK_ALLOW_BACKGROUND_EVENTS" + + +/** + * \brief If set to 0 then never set the top most bit on a SDL Window, even if the video mode expects it. + * This is a debugging aid for developers and not expected to be used by end users. The default is "1" + * + * This variable can be set to the following values: + * "0" - don't allow topmost + * "1" - allow topmost + */ +#define SDL_HINT_ALLOW_TOPMOST "SDL_ALLOW_TOPMOST" + + +/** + * \brief A variable that controls the timer resolution, in milliseconds. + * + * The higher resolution the timer, the more frequently the CPU services + * timer interrupts, and the more precise delays are, but this takes up + * power and CPU time. This hint is only used on Windows 7 and earlier. + * + * See this blog post for more information: + * http://randomascii.wordpress.com/2013/07/08/windows-timer-resolution-megawatts-wasted/ + * + * If this variable is set to "0", the system timer resolution is not set. + * + * The default value is "1". This hint may be set at any time. + */ +#define SDL_HINT_TIMER_RESOLUTION "SDL_TIMER_RESOLUTION" + + + +/** + * \brief An enumeration of hint priorities + */ +typedef enum +{ + SDL_HINT_DEFAULT, + SDL_HINT_NORMAL, + SDL_HINT_OVERRIDE +} SDL_HintPriority; + + +/** + * \brief Set a hint with a specific priority + * + * The priority controls the behavior when setting a hint that already + * has a value. Hints will replace existing hints of their priority and + * lower. Environment variables are considered to have override priority. + * + * \return SDL_TRUE if the hint was set, SDL_FALSE otherwise + */ +extern DECLSPEC SDL_bool SDLCALL SDL_SetHintWithPriority(const char *name, + const char *value, + SDL_HintPriority priority); + +/** + * \brief Set a hint with normal priority + * + * \return SDL_TRUE if the hint was set, SDL_FALSE otherwise + */ +extern DECLSPEC SDL_bool SDLCALL SDL_SetHint(const char *name, + const char *value); + +/** + * \brief Get a hint + * + * \return The string value of a hint variable. + */ +extern DECLSPEC const char * SDLCALL SDL_GetHint(const char *name); + +/** + * \brief Add a function to watch a particular hint + * + * \param name The hint to watch + * \param callback The function to call when the hint value changes + * \param userdata A pointer to pass to the callback function + */ +typedef void (*SDL_HintCallback)(void *userdata, const char *name, const char *oldValue, const char *newValue); +extern DECLSPEC void SDLCALL SDL_AddHintCallback(const char *name, + SDL_HintCallback callback, + void *userdata); + +/** + * \brief Remove a function watching a particular hint + * + * \param name The hint being watched + * \param callback The function being called when the hint value changes + * \param userdata A pointer being passed to the callback function + */ +extern DECLSPEC void SDLCALL SDL_DelHintCallback(const char *name, + SDL_HintCallback callback, + void *userdata); + +/** + * \brief Clear all hints + * + * This function is called during SDL_Quit() to free stored hints. + */ +extern DECLSPEC void SDLCALL SDL_ClearHints(void); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_hints_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_image.h b/src/SDL2/SDL_image.h new file mode 100644 index 000000000..8862a12b0 --- /dev/null +++ b/src/SDL2/SDL_image.h @@ -0,0 +1,145 @@ +/* + SDL_image: An example image loading library for use with SDL + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* A simple library to load images of various formats as SDL surfaces */ + +#ifndef _SDL_IMAGE_H +#define _SDL_IMAGE_H + +#include "SDL.h" +#include "SDL_version.h" +#include "begin_code.h" + +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* Printable format: "%d.%d.%d", MAJOR, MINOR, PATCHLEVEL +*/ +#define SDL_IMAGE_MAJOR_VERSION 2 +#define SDL_IMAGE_MINOR_VERSION 0 +#define SDL_IMAGE_PATCHLEVEL 0 + +/* This macro can be used to fill a version structure with the compile-time + * version of the SDL_image library. + */ +#define SDL_IMAGE_VERSION(X) \ +{ \ + (X)->major = SDL_IMAGE_MAJOR_VERSION; \ + (X)->minor = SDL_IMAGE_MINOR_VERSION; \ + (X)->patch = SDL_IMAGE_PATCHLEVEL; \ +} + +/* This function gets the version of the dynamically linked SDL_image library. + it should NOT be used to fill a version structure, instead you should + use the SDL_IMAGE_VERSION() macro. + */ +extern DECLSPEC const SDL_version * SDLCALL IMG_Linked_Version(void); + +typedef enum +{ + IMG_INIT_JPG = 0x00000001, + IMG_INIT_PNG = 0x00000002, + IMG_INIT_TIF = 0x00000004, + IMG_INIT_WEBP = 0x00000008 +} IMG_InitFlags; + +/* Loads dynamic libraries and prepares them for use. Flags should be + one or more flags from IMG_InitFlags OR'd together. + It returns the flags successfully initialized, or 0 on failure. + */ +extern DECLSPEC int SDLCALL IMG_Init(int flags); + +/* Unloads libraries loaded with IMG_Init */ +extern DECLSPEC void SDLCALL IMG_Quit(void); + +/* Load an image from an SDL data source. + The 'type' may be one of: "BMP", "GIF", "PNG", etc. + + If the image format supports a transparent pixel, SDL will set the + colorkey for the surface. You can enable RLE acceleration on the + surface afterwards by calling: + SDL_SetColorKey(image, SDL_RLEACCEL, image->format->colorkey); + */ +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadTyped_RW(SDL_RWops *src, int freesrc, const char *type); +/* Convenience functions */ +extern DECLSPEC SDL_Surface * SDLCALL IMG_Load(const char *file); +extern DECLSPEC SDL_Surface * SDLCALL IMG_Load_RW(SDL_RWops *src, int freesrc); + +#if SDL_VERSION_ATLEAST(2,0,0) +/* Load an image directly into a render texture. + */ +extern DECLSPEC SDL_Texture * SDLCALL IMG_LoadTexture(SDL_Renderer *renderer, const char *file); +extern DECLSPEC SDL_Texture * SDLCALL IMG_LoadTexture_RW(SDL_Renderer *renderer, SDL_RWops *src, int freesrc); +extern DECLSPEC SDL_Texture * SDLCALL IMG_LoadTextureTyped_RW(SDL_Renderer *renderer, SDL_RWops *src, int freesrc, const char *type); +#endif /* SDL 2.0 */ + +/* Functions to detect a file type, given a seekable source */ +extern DECLSPEC int SDLCALL IMG_isICO(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isCUR(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isBMP(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isGIF(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isJPG(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isLBM(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isPCX(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isPNG(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isPNM(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isTIF(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isXCF(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isXPM(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isXV(SDL_RWops *src); +extern DECLSPEC int SDLCALL IMG_isWEBP(SDL_RWops *src); + +/* Individual loading functions */ +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadICO_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadCUR_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadBMP_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadGIF_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadJPG_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadLBM_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadPCX_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadPNG_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadPNM_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadTGA_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadTIF_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadXCF_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadXPM_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadXV_RW(SDL_RWops *src); +extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadWEBP_RW(SDL_RWops *src); + +extern DECLSPEC SDL_Surface * SDLCALL IMG_ReadXPMFromArray(char **xpm); + +/* Individual saving functions */ +extern DECLSPEC int SDLCALL IMG_SavePNG(SDL_Surface *surface, const char *file); +extern DECLSPEC int SDLCALL IMG_SavePNG_RW(SDL_Surface *surface, SDL_RWops *dst, int freedst); + +/* We'll use SDL for reporting errors */ +#define IMG_SetError SDL_SetError +#define IMG_GetError SDL_GetError + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_IMAGE_H */ diff --git a/src/SDL2/SDL_joystick.h b/src/SDL2/SDL_joystick.h new file mode 100644 index 000000000..266740348 --- /dev/null +++ b/src/SDL2/SDL_joystick.h @@ -0,0 +1,253 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_joystick.h + * + * Include file for SDL joystick event handling + * + * The term "device_index" identifies currently plugged in joystick devices between 0 and SDL_NumJoysticks, with the exact joystick + * behind a device_index changing as joysticks are plugged and unplugged. + * + * The term "instance_id" is the current instantiation of a joystick device in the system, if the joystick is removed and then re-inserted + * then it will get a new instance_id, instance_id's are monotonically increasing identifiers of a joystick plugged in. + * + * The term JoystickGUID is a stable 128-bit identifier for a joystick device that does not change over time, it identifies class of + * the device (a X360 wired controller for example). This identifier is platform dependent. + * + * + */ + +#ifndef _SDL_joystick_h +#define _SDL_joystick_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \file SDL_joystick.h + * + * In order to use these functions, SDL_Init() must have been called + * with the ::SDL_INIT_JOYSTICK flag. This causes SDL to scan the system + * for joysticks, and load appropriate drivers. + * + * If you would like to receive joystick updates while the application + * is in the background, you should set the following hint before calling + * SDL_Init(): SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS + */ + +/* The joystick structure used to identify an SDL joystick */ +struct _SDL_Joystick; +typedef struct _SDL_Joystick SDL_Joystick; + +/* A structure that encodes the stable unique id for a joystick device */ +typedef struct { + Uint8 data[16]; +} SDL_JoystickGUID; + +typedef Sint32 SDL_JoystickID; + + +/* Function prototypes */ +/** + * Count the number of joysticks attached to the system right now + */ +extern DECLSPEC int SDLCALL SDL_NumJoysticks(void); + +/** + * Get the implementation dependent name of a joystick. + * This can be called before any joysticks are opened. + * If no name can be found, this function returns NULL. + */ +extern DECLSPEC const char *SDLCALL SDL_JoystickNameForIndex(int device_index); + +/** + * Open a joystick for use. + * The index passed as an argument refers tothe N'th joystick on the system. + * This index is the value which will identify this joystick in future joystick + * events. + * + * \return A joystick identifier, or NULL if an error occurred. + */ +extern DECLSPEC SDL_Joystick *SDLCALL SDL_JoystickOpen(int device_index); + +/** + * Return the name for this currently opened joystick. + * If no name can be found, this function returns NULL. + */ +extern DECLSPEC const char *SDLCALL SDL_JoystickName(SDL_Joystick * joystick); + +/** + * Return the GUID for the joystick at this index + */ +extern DECLSPEC SDL_JoystickGUID SDLCALL SDL_JoystickGetDeviceGUID(int device_index); + +/** + * Return the GUID for this opened joystick + */ +extern DECLSPEC SDL_JoystickGUID SDLCALL SDL_JoystickGetGUID(SDL_Joystick * joystick); + +/** + * Return a string representation for this guid. pszGUID must point to at least 33 bytes + * (32 for the string plus a NULL terminator). + */ +extern DECLSPEC void SDL_JoystickGetGUIDString(SDL_JoystickGUID guid, char *pszGUID, int cbGUID); + +/** + * convert a string into a joystick formatted guid + */ +extern DECLSPEC SDL_JoystickGUID SDLCALL SDL_JoystickGetGUIDFromString(const char *pchGUID); + +/** + * Returns SDL_TRUE if the joystick has been opened and currently connected, or SDL_FALSE if it has not. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_JoystickGetAttached(SDL_Joystick * joystick); + +/** + * Get the instance ID of an opened joystick or -1 if the joystick is invalid. + */ +extern DECLSPEC SDL_JoystickID SDLCALL SDL_JoystickInstanceID(SDL_Joystick * joystick); + +/** + * Get the number of general axis controls on a joystick. + */ +extern DECLSPEC int SDLCALL SDL_JoystickNumAxes(SDL_Joystick * joystick); + +/** + * Get the number of trackballs on a joystick. + * + * Joystick trackballs have only relative motion events associated + * with them and their state cannot be polled. + */ +extern DECLSPEC int SDLCALL SDL_JoystickNumBalls(SDL_Joystick * joystick); + +/** + * Get the number of POV hats on a joystick. + */ +extern DECLSPEC int SDLCALL SDL_JoystickNumHats(SDL_Joystick * joystick); + +/** + * Get the number of buttons on a joystick. + */ +extern DECLSPEC int SDLCALL SDL_JoystickNumButtons(SDL_Joystick * joystick); + +/** + * Update the current state of the open joysticks. + * + * This is called automatically by the event loop if any joystick + * events are enabled. + */ +extern DECLSPEC void SDLCALL SDL_JoystickUpdate(void); + +/** + * Enable/disable joystick event polling. + * + * If joystick events are disabled, you must call SDL_JoystickUpdate() + * yourself and check the state of the joystick when you want joystick + * information. + * + * The state can be one of ::SDL_QUERY, ::SDL_ENABLE or ::SDL_IGNORE. + */ +extern DECLSPEC int SDLCALL SDL_JoystickEventState(int state); + +/** + * Get the current state of an axis control on a joystick. + * + * The state is a value ranging from -32768 to 32767. + * + * The axis indices start at index 0. + */ +extern DECLSPEC Sint16 SDLCALL SDL_JoystickGetAxis(SDL_Joystick * joystick, + int axis); + +/** + * \name Hat positions + */ +/*@{*/ +#define SDL_HAT_CENTERED 0x00 +#define SDL_HAT_UP 0x01 +#define SDL_HAT_RIGHT 0x02 +#define SDL_HAT_DOWN 0x04 +#define SDL_HAT_LEFT 0x08 +#define SDL_HAT_RIGHTUP (SDL_HAT_RIGHT|SDL_HAT_UP) +#define SDL_HAT_RIGHTDOWN (SDL_HAT_RIGHT|SDL_HAT_DOWN) +#define SDL_HAT_LEFTUP (SDL_HAT_LEFT|SDL_HAT_UP) +#define SDL_HAT_LEFTDOWN (SDL_HAT_LEFT|SDL_HAT_DOWN) +/*@}*/ + +/** + * Get the current state of a POV hat on a joystick. + * + * The hat indices start at index 0. + * + * \return The return value is one of the following positions: + * - ::SDL_HAT_CENTERED + * - ::SDL_HAT_UP + * - ::SDL_HAT_RIGHT + * - ::SDL_HAT_DOWN + * - ::SDL_HAT_LEFT + * - ::SDL_HAT_RIGHTUP + * - ::SDL_HAT_RIGHTDOWN + * - ::SDL_HAT_LEFTUP + * - ::SDL_HAT_LEFTDOWN + */ +extern DECLSPEC Uint8 SDLCALL SDL_JoystickGetHat(SDL_Joystick * joystick, + int hat); + +/** + * Get the ball axis change since the last poll. + * + * \return 0, or -1 if you passed it invalid parameters. + * + * The ball indices start at index 0. + */ +extern DECLSPEC int SDLCALL SDL_JoystickGetBall(SDL_Joystick * joystick, + int ball, int *dx, int *dy); + +/** + * Get the current state of a button on a joystick. + * + * The button indices start at index 0. + */ +extern DECLSPEC Uint8 SDLCALL SDL_JoystickGetButton(SDL_Joystick * joystick, + int button); + +/** + * Close a joystick previously opened with SDL_JoystickOpen(). + */ +extern DECLSPEC void SDLCALL SDL_JoystickClose(SDL_Joystick * joystick); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_joystick_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_keyboard.h b/src/SDL2/SDL_keyboard.h new file mode 100644 index 000000000..e10f9fd15 --- /dev/null +++ b/src/SDL2/SDL_keyboard.h @@ -0,0 +1,217 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_keyboard.h + * + * Include file for SDL keyboard event handling + */ + +#ifndef _SDL_keyboard_h +#define _SDL_keyboard_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_keycode.h" +#include "SDL_video.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief The SDL keysym structure, used in key events. + * + * \note If you are looking for translated character input, see the ::SDL_TEXTINPUT event. + */ +typedef struct SDL_Keysym +{ + SDL_Scancode scancode; /**< SDL physical key code - see ::SDL_Scancode for details */ + SDL_Keycode sym; /**< SDL virtual key code - see ::SDL_Keycode for details */ + Uint16 mod; /**< current key modifiers */ + Uint32 unused; +} SDL_Keysym; + +/* Function prototypes */ + +/** + * \brief Get the window which currently has keyboard focus. + */ +extern DECLSPEC SDL_Window * SDLCALL SDL_GetKeyboardFocus(void); + +/** + * \brief Get a snapshot of the current state of the keyboard. + * + * \param numkeys if non-NULL, receives the length of the returned array. + * + * \return An array of key states. Indexes into this array are obtained by using ::SDL_Scancode values. + * + * \b Example: + * \code + * const Uint8 *state = SDL_GetKeyboardState(NULL); + * if ( state[SDL_SCANCODE_RETURN] ) { + * printf(" is pressed.\n"); + * } + * \endcode + */ +extern DECLSPEC const Uint8 *SDLCALL SDL_GetKeyboardState(int *numkeys); + +/** + * \brief Get the current key modifier state for the keyboard. + */ +extern DECLSPEC SDL_Keymod SDLCALL SDL_GetModState(void); + +/** + * \brief Set the current key modifier state for the keyboard. + * + * \note This does not change the keyboard state, only the key modifier flags. + */ +extern DECLSPEC void SDLCALL SDL_SetModState(SDL_Keymod modstate); + +/** + * \brief Get the key code corresponding to the given scancode according + * to the current keyboard layout. + * + * See ::SDL_Keycode for details. + * + * \sa SDL_GetKeyName() + */ +extern DECLSPEC SDL_Keycode SDLCALL SDL_GetKeyFromScancode(SDL_Scancode scancode); + +/** + * \brief Get the scancode corresponding to the given key code according to the + * current keyboard layout. + * + * See ::SDL_Scancode for details. + * + * \sa SDL_GetScancodeName() + */ +extern DECLSPEC SDL_Scancode SDLCALL SDL_GetScancodeFromKey(SDL_Keycode key); + +/** + * \brief Get a human-readable name for a scancode. + * + * \return A pointer to the name for the scancode. + * If the scancode doesn't have a name, this function returns + * an empty string (""). + * + * \sa SDL_Scancode + */ +extern DECLSPEC const char *SDLCALL SDL_GetScancodeName(SDL_Scancode scancode); + +/** + * \brief Get a scancode from a human-readable name + * + * \return scancode, or SDL_SCANCODE_UNKNOWN if the name wasn't recognized + * + * \sa SDL_Scancode + */ +extern DECLSPEC SDL_Scancode SDLCALL SDL_GetScancodeFromName(const char *name); + +/** + * \brief Get a human-readable name for a key. + * + * \return A pointer to a UTF-8 string that stays valid at least until the next + * call to this function. If you need it around any longer, you must + * copy it. If the key doesn't have a name, this function returns an + * empty string (""). + * + * \sa SDL_Key + */ +extern DECLSPEC const char *SDLCALL SDL_GetKeyName(SDL_Keycode key); + +/** + * \brief Get a key code from a human-readable name + * + * \return key code, or SDLK_UNKNOWN if the name wasn't recognized + * + * \sa SDL_Keycode + */ +extern DECLSPEC SDL_Keycode SDLCALL SDL_GetKeyFromName(const char *name); + +/** + * \brief Start accepting Unicode text input events. + * This function will show the on-screen keyboard if supported. + * + * \sa SDL_StopTextInput() + * \sa SDL_SetTextInputRect() + * \sa SDL_HasScreenKeyboardSupport() + */ +extern DECLSPEC void SDLCALL SDL_StartTextInput(void); + +/** + * \brief Return whether or not Unicode text input events are enabled. + * + * \sa SDL_StartTextInput() + * \sa SDL_StopTextInput() + */ +extern DECLSPEC SDL_bool SDLCALL SDL_IsTextInputActive(void); + +/** + * \brief Stop receiving any text input events. + * This function will hide the on-screen keyboard if supported. + * + * \sa SDL_StartTextInput() + * \sa SDL_HasScreenKeyboardSupport() + */ +extern DECLSPEC void SDLCALL SDL_StopTextInput(void); + +/** + * \brief Set the rectangle used to type Unicode text inputs. + * This is used as a hint for IME and on-screen keyboard placement. + * + * \sa SDL_StartTextInput() + */ +extern DECLSPEC void SDLCALL SDL_SetTextInputRect(SDL_Rect *rect); + +/** + * \brief Returns whether the platform has some screen keyboard support. + * + * \return SDL_TRUE if some keyboard support is available else SDL_FALSE. + * + * \note Not all screen keyboard functions are supported on all platforms. + * + * \sa SDL_IsScreenKeyboardShown() + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasScreenKeyboardSupport(void); + +/** + * \brief Returns whether the screen keyboard is shown for given window. + * + * \param window The window for which screen keyboard should be queried. + * + * \return SDL_TRUE if screen keyboard is shown else SDL_FALSE. + * + * \sa SDL_HasScreenKeyboardSupport() + */ +extern DECLSPEC SDL_bool SDLCALL SDL_IsScreenKeyboardShown(SDL_Window *window); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_keyboard_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_keycode.h b/src/SDL2/SDL_keycode.h new file mode 100644 index 000000000..de584e126 --- /dev/null +++ b/src/SDL2/SDL_keycode.h @@ -0,0 +1,341 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_keycode.h + * + * Defines constants which identify keyboard keys and modifiers. + */ + +#ifndef _SDL_keycode_h +#define _SDL_keycode_h + +#include "SDL_stdinc.h" +#include "SDL_scancode.h" + +/** + * \brief The SDL virtual key representation. + * + * Values of this type are used to represent keyboard keys using the current + * layout of the keyboard. These values include Unicode values representing + * the unmodified character that would be generated by pressing the key, or + * an SDLK_* constant for those keys that do not generate characters. + */ +typedef Sint32 SDL_Keycode; + +#define SDLK_SCANCODE_MASK (1<<30) +#define SDL_SCANCODE_TO_KEYCODE(X) (X | SDLK_SCANCODE_MASK) + +enum +{ + SDLK_UNKNOWN = 0, + + SDLK_RETURN = '\r', + SDLK_ESCAPE = '\033', + SDLK_BACKSPACE = '\b', + SDLK_TAB = '\t', + SDLK_SPACE = ' ', + SDLK_EXCLAIM = '!', + SDLK_QUOTEDBL = '"', + SDLK_HASH = '#', + SDLK_PERCENT = '%', + SDLK_DOLLAR = '$', + SDLK_AMPERSAND = '&', + SDLK_QUOTE = '\'', + SDLK_LEFTPAREN = '(', + SDLK_RIGHTPAREN = ')', + SDLK_ASTERISK = '*', + SDLK_PLUS = '+', + SDLK_COMMA = ',', + SDLK_MINUS = '-', + SDLK_PERIOD = '.', + SDLK_SLASH = '/', + SDLK_0 = '0', + SDLK_1 = '1', + SDLK_2 = '2', + SDLK_3 = '3', + SDLK_4 = '4', + SDLK_5 = '5', + SDLK_6 = '6', + SDLK_7 = '7', + SDLK_8 = '8', + SDLK_9 = '9', + SDLK_COLON = ':', + SDLK_SEMICOLON = ';', + SDLK_LESS = '<', + SDLK_EQUALS = '=', + SDLK_GREATER = '>', + SDLK_QUESTION = '?', + SDLK_AT = '@', + /* + Skip uppercase letters + */ + SDLK_LEFTBRACKET = '[', + SDLK_BACKSLASH = '\\', + SDLK_RIGHTBRACKET = ']', + SDLK_CARET = '^', + SDLK_UNDERSCORE = '_', + SDLK_BACKQUOTE = '`', + SDLK_a = 'a', + SDLK_b = 'b', + SDLK_c = 'c', + SDLK_d = 'd', + SDLK_e = 'e', + SDLK_f = 'f', + SDLK_g = 'g', + SDLK_h = 'h', + SDLK_i = 'i', + SDLK_j = 'j', + SDLK_k = 'k', + SDLK_l = 'l', + SDLK_m = 'm', + SDLK_n = 'n', + SDLK_o = 'o', + SDLK_p = 'p', + SDLK_q = 'q', + SDLK_r = 'r', + SDLK_s = 's', + SDLK_t = 't', + SDLK_u = 'u', + SDLK_v = 'v', + SDLK_w = 'w', + SDLK_x = 'x', + SDLK_y = 'y', + SDLK_z = 'z', + + SDLK_CAPSLOCK = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CAPSLOCK), + + SDLK_F1 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F1), + SDLK_F2 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F2), + SDLK_F3 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F3), + SDLK_F4 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F4), + SDLK_F5 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F5), + SDLK_F6 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F6), + SDLK_F7 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F7), + SDLK_F8 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F8), + SDLK_F9 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F9), + SDLK_F10 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F10), + SDLK_F11 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F11), + SDLK_F12 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F12), + + SDLK_PRINTSCREEN = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PRINTSCREEN), + SDLK_SCROLLLOCK = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SCROLLLOCK), + SDLK_PAUSE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PAUSE), + SDLK_INSERT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_INSERT), + SDLK_HOME = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_HOME), + SDLK_PAGEUP = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PAGEUP), + SDLK_DELETE = '\177', + SDLK_END = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_END), + SDLK_PAGEDOWN = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PAGEDOWN), + SDLK_RIGHT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RIGHT), + SDLK_LEFT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_LEFT), + SDLK_DOWN = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_DOWN), + SDLK_UP = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_UP), + + SDLK_NUMLOCKCLEAR = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_NUMLOCKCLEAR), + SDLK_KP_DIVIDE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_DIVIDE), + SDLK_KP_MULTIPLY = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MULTIPLY), + SDLK_KP_MINUS = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MINUS), + SDLK_KP_PLUS = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_PLUS), + SDLK_KP_ENTER = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_ENTER), + SDLK_KP_1 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_1), + SDLK_KP_2 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_2), + SDLK_KP_3 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_3), + SDLK_KP_4 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_4), + SDLK_KP_5 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_5), + SDLK_KP_6 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_6), + SDLK_KP_7 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_7), + SDLK_KP_8 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_8), + SDLK_KP_9 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_9), + SDLK_KP_0 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_0), + SDLK_KP_PERIOD = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_PERIOD), + + SDLK_APPLICATION = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_APPLICATION), + SDLK_POWER = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_POWER), + SDLK_KP_EQUALS = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_EQUALS), + SDLK_F13 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F13), + SDLK_F14 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F14), + SDLK_F15 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F15), + SDLK_F16 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F16), + SDLK_F17 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F17), + SDLK_F18 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F18), + SDLK_F19 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F19), + SDLK_F20 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F20), + SDLK_F21 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F21), + SDLK_F22 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F22), + SDLK_F23 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F23), + SDLK_F24 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F24), + SDLK_EXECUTE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_EXECUTE), + SDLK_HELP = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_HELP), + SDLK_MENU = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MENU), + SDLK_SELECT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SELECT), + SDLK_STOP = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_STOP), + SDLK_AGAIN = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AGAIN), + SDLK_UNDO = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_UNDO), + SDLK_CUT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CUT), + SDLK_COPY = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_COPY), + SDLK_PASTE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PASTE), + SDLK_FIND = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_FIND), + SDLK_MUTE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MUTE), + SDLK_VOLUMEUP = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_VOLUMEUP), + SDLK_VOLUMEDOWN = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_VOLUMEDOWN), + SDLK_KP_COMMA = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_COMMA), + SDLK_KP_EQUALSAS400 = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_EQUALSAS400), + + SDLK_ALTERASE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_ALTERASE), + SDLK_SYSREQ = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SYSREQ), + SDLK_CANCEL = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CANCEL), + SDLK_CLEAR = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CLEAR), + SDLK_PRIOR = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PRIOR), + SDLK_RETURN2 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RETURN2), + SDLK_SEPARATOR = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SEPARATOR), + SDLK_OUT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_OUT), + SDLK_OPER = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_OPER), + SDLK_CLEARAGAIN = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CLEARAGAIN), + SDLK_CRSEL = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CRSEL), + SDLK_EXSEL = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_EXSEL), + + SDLK_KP_00 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_00), + SDLK_KP_000 = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_000), + SDLK_THOUSANDSSEPARATOR = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_THOUSANDSSEPARATOR), + SDLK_DECIMALSEPARATOR = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_DECIMALSEPARATOR), + SDLK_CURRENCYUNIT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CURRENCYUNIT), + SDLK_CURRENCYSUBUNIT = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CURRENCYSUBUNIT), + SDLK_KP_LEFTPAREN = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_LEFTPAREN), + SDLK_KP_RIGHTPAREN = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_RIGHTPAREN), + SDLK_KP_LEFTBRACE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_LEFTBRACE), + SDLK_KP_RIGHTBRACE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_RIGHTBRACE), + SDLK_KP_TAB = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_TAB), + SDLK_KP_BACKSPACE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_BACKSPACE), + SDLK_KP_A = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_A), + SDLK_KP_B = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_B), + SDLK_KP_C = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_C), + SDLK_KP_D = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_D), + SDLK_KP_E = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_E), + SDLK_KP_F = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_F), + SDLK_KP_XOR = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_XOR), + SDLK_KP_POWER = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_POWER), + SDLK_KP_PERCENT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_PERCENT), + SDLK_KP_LESS = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_LESS), + SDLK_KP_GREATER = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_GREATER), + SDLK_KP_AMPERSAND = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_AMPERSAND), + SDLK_KP_DBLAMPERSAND = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_DBLAMPERSAND), + SDLK_KP_VERTICALBAR = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_VERTICALBAR), + SDLK_KP_DBLVERTICALBAR = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_DBLVERTICALBAR), + SDLK_KP_COLON = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_COLON), + SDLK_KP_HASH = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_HASH), + SDLK_KP_SPACE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_SPACE), + SDLK_KP_AT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_AT), + SDLK_KP_EXCLAM = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_EXCLAM), + SDLK_KP_MEMSTORE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMSTORE), + SDLK_KP_MEMRECALL = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMRECALL), + SDLK_KP_MEMCLEAR = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMCLEAR), + SDLK_KP_MEMADD = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMADD), + SDLK_KP_MEMSUBTRACT = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMSUBTRACT), + SDLK_KP_MEMMULTIPLY = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMMULTIPLY), + SDLK_KP_MEMDIVIDE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMDIVIDE), + SDLK_KP_PLUSMINUS = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_PLUSMINUS), + SDLK_KP_CLEAR = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_CLEAR), + SDLK_KP_CLEARENTRY = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_CLEARENTRY), + SDLK_KP_BINARY = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_BINARY), + SDLK_KP_OCTAL = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_OCTAL), + SDLK_KP_DECIMAL = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_DECIMAL), + SDLK_KP_HEXADECIMAL = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_HEXADECIMAL), + + SDLK_LCTRL = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_LCTRL), + SDLK_LSHIFT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_LSHIFT), + SDLK_LALT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_LALT), + SDLK_LGUI = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_LGUI), + SDLK_RCTRL = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RCTRL), + SDLK_RSHIFT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RSHIFT), + SDLK_RALT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RALT), + SDLK_RGUI = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RGUI), + + SDLK_MODE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MODE), + + SDLK_AUDIONEXT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AUDIONEXT), + SDLK_AUDIOPREV = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AUDIOPREV), + SDLK_AUDIOSTOP = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AUDIOSTOP), + SDLK_AUDIOPLAY = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AUDIOPLAY), + SDLK_AUDIOMUTE = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AUDIOMUTE), + SDLK_MEDIASELECT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIASELECT), + SDLK_WWW = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_WWW), + SDLK_MAIL = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MAIL), + SDLK_CALCULATOR = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CALCULATOR), + SDLK_COMPUTER = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_COMPUTER), + SDLK_AC_SEARCH = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_SEARCH), + SDLK_AC_HOME = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_HOME), + SDLK_AC_BACK = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_BACK), + SDLK_AC_FORWARD = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_FORWARD), + SDLK_AC_STOP = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_STOP), + SDLK_AC_REFRESH = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_REFRESH), + SDLK_AC_BOOKMARKS = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_BOOKMARKS), + + SDLK_BRIGHTNESSDOWN = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_BRIGHTNESSDOWN), + SDLK_BRIGHTNESSUP = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_BRIGHTNESSUP), + SDLK_DISPLAYSWITCH = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_DISPLAYSWITCH), + SDLK_KBDILLUMTOGGLE = + SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KBDILLUMTOGGLE), + SDLK_KBDILLUMDOWN = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KBDILLUMDOWN), + SDLK_KBDILLUMUP = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KBDILLUMUP), + SDLK_EJECT = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_EJECT), + SDLK_SLEEP = SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SLEEP) +}; + +/** + * \brief Enumeration of valid key mods (possibly OR'd together). + */ +typedef enum +{ + KMOD_NONE = 0x0000, + KMOD_LSHIFT = 0x0001, + KMOD_RSHIFT = 0x0002, + KMOD_LCTRL = 0x0040, + KMOD_RCTRL = 0x0080, + KMOD_LALT = 0x0100, + KMOD_RALT = 0x0200, + KMOD_LGUI = 0x0400, + KMOD_RGUI = 0x0800, + KMOD_NUM = 0x1000, + KMOD_CAPS = 0x2000, + KMOD_MODE = 0x4000, + KMOD_RESERVED = 0x8000 +} SDL_Keymod; + +#define KMOD_CTRL (KMOD_LCTRL|KMOD_RCTRL) +#define KMOD_SHIFT (KMOD_LSHIFT|KMOD_RSHIFT) +#define KMOD_ALT (KMOD_LALT|KMOD_RALT) +#define KMOD_GUI (KMOD_LGUI|KMOD_RGUI) + +#endif /* _SDL_keycode_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_loadso.h b/src/SDL2/SDL_loadso.h new file mode 100644 index 000000000..790d0a724 --- /dev/null +++ b/src/SDL2/SDL_loadso.h @@ -0,0 +1,81 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_loadso.h + * + * System dependent library loading routines + * + * Some things to keep in mind: + * \li These functions only work on C function names. Other languages may + * have name mangling and intrinsic language support that varies from + * compiler to compiler. + * \li Make sure you declare your function pointers with the same calling + * convention as the actual library function. Your code will crash + * mysteriously if you do not do this. + * \li Avoid namespace collisions. If you load a symbol from the library, + * it is not defined whether or not it goes into the global symbol + * namespace for the application. If it does and it conflicts with + * symbols in your code or other shared libraries, you will not get + * the results you expect. :) + */ + +#ifndef _SDL_loadso_h +#define _SDL_loadso_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * This function dynamically loads a shared object and returns a pointer + * to the object handle (or NULL if there was an error). + * The 'sofile' parameter is a system dependent name of the object file. + */ +extern DECLSPEC void *SDLCALL SDL_LoadObject(const char *sofile); + +/** + * Given an object handle, this function looks up the address of the + * named function in the shared object and returns it. This address + * is no longer valid after calling SDL_UnloadObject(). + */ +extern DECLSPEC void *SDLCALL SDL_LoadFunction(void *handle, + const char *name); + +/** + * Unload a shared object from memory. + */ +extern DECLSPEC void SDLCALL SDL_UnloadObject(void *handle); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_loadso_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_log.h b/src/SDL2/SDL_log.h new file mode 100644 index 000000000..79ae4cde4 --- /dev/null +++ b/src/SDL2/SDL_log.h @@ -0,0 +1,211 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_log.h + * + * Simple log messages with categories and priorities. + * + * By default logs are quiet, but if you're debugging SDL you might want: + * + * SDL_LogSetAllPriority(SDL_LOG_PRIORITY_WARN); + * + * Here's where the messages go on different platforms: + * Windows: debug output stream + * Android: log output + * Others: standard error output (stderr) + */ + +#ifndef _SDL_log_h +#define _SDL_log_h + +#include "SDL_stdinc.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + + +/** + * \brief The maximum size of a log message + * + * Messages longer than the maximum size will be truncated + */ +#define SDL_MAX_LOG_MESSAGE 4096 + +/** + * \brief The predefined log categories + * + * By default the application category is enabled at the INFO level, + * the assert category is enabled at the WARN level, test is enabled + * at the VERBOSE level and all other categories are enabled at the + * CRITICAL level. + */ +enum +{ + SDL_LOG_CATEGORY_APPLICATION, + SDL_LOG_CATEGORY_ERROR, + SDL_LOG_CATEGORY_ASSERT, + SDL_LOG_CATEGORY_SYSTEM, + SDL_LOG_CATEGORY_AUDIO, + SDL_LOG_CATEGORY_VIDEO, + SDL_LOG_CATEGORY_RENDER, + SDL_LOG_CATEGORY_INPUT, + SDL_LOG_CATEGORY_TEST, + + /* Reserved for future SDL library use */ + SDL_LOG_CATEGORY_RESERVED1, + SDL_LOG_CATEGORY_RESERVED2, + SDL_LOG_CATEGORY_RESERVED3, + SDL_LOG_CATEGORY_RESERVED4, + SDL_LOG_CATEGORY_RESERVED5, + SDL_LOG_CATEGORY_RESERVED6, + SDL_LOG_CATEGORY_RESERVED7, + SDL_LOG_CATEGORY_RESERVED8, + SDL_LOG_CATEGORY_RESERVED9, + SDL_LOG_CATEGORY_RESERVED10, + + /* Beyond this point is reserved for application use, e.g. + enum { + MYAPP_CATEGORY_AWESOME1 = SDL_LOG_CATEGORY_CUSTOM, + MYAPP_CATEGORY_AWESOME2, + MYAPP_CATEGORY_AWESOME3, + ... + }; + */ + SDL_LOG_CATEGORY_CUSTOM +}; + +/** + * \brief The predefined log priorities + */ +typedef enum +{ + SDL_LOG_PRIORITY_VERBOSE = 1, + SDL_LOG_PRIORITY_DEBUG, + SDL_LOG_PRIORITY_INFO, + SDL_LOG_PRIORITY_WARN, + SDL_LOG_PRIORITY_ERROR, + SDL_LOG_PRIORITY_CRITICAL, + SDL_NUM_LOG_PRIORITIES +} SDL_LogPriority; + + +/** + * \brief Set the priority of all log categories + */ +extern DECLSPEC void SDLCALL SDL_LogSetAllPriority(SDL_LogPriority priority); + +/** + * \brief Set the priority of a particular log category + */ +extern DECLSPEC void SDLCALL SDL_LogSetPriority(int category, + SDL_LogPriority priority); + +/** + * \brief Get the priority of a particular log category + */ +extern DECLSPEC SDL_LogPriority SDLCALL SDL_LogGetPriority(int category); + +/** + * \brief Reset all priorities to default. + * + * \note This is called in SDL_Quit(). + */ +extern DECLSPEC void SDLCALL SDL_LogResetPriorities(void); + +/** + * \brief Log a message with SDL_LOG_CATEGORY_APPLICATION and SDL_LOG_PRIORITY_INFO + */ +extern DECLSPEC void SDLCALL SDL_Log(const char *fmt, ...); + +/** + * \brief Log a message with SDL_LOG_PRIORITY_VERBOSE + */ +extern DECLSPEC void SDLCALL SDL_LogVerbose(int category, const char *fmt, ...); + +/** + * \brief Log a message with SDL_LOG_PRIORITY_DEBUG + */ +extern DECLSPEC void SDLCALL SDL_LogDebug(int category, const char *fmt, ...); + +/** + * \brief Log a message with SDL_LOG_PRIORITY_INFO + */ +extern DECLSPEC void SDLCALL SDL_LogInfo(int category, const char *fmt, ...); + +/** + * \brief Log a message with SDL_LOG_PRIORITY_WARN + */ +extern DECLSPEC void SDLCALL SDL_LogWarn(int category, const char *fmt, ...); + +/** + * \brief Log a message with SDL_LOG_PRIORITY_ERROR + */ +extern DECLSPEC void SDLCALL SDL_LogError(int category, const char *fmt, ...); + +/** + * \brief Log a message with SDL_LOG_PRIORITY_CRITICAL + */ +extern DECLSPEC void SDLCALL SDL_LogCritical(int category, const char *fmt, ...); + +/** + * \brief Log a message with the specified category and priority. + */ +extern DECLSPEC void SDLCALL SDL_LogMessage(int category, + SDL_LogPriority priority, + const char *fmt, ...); + +/** + * \brief Log a message with the specified category and priority. + */ +extern DECLSPEC void SDLCALL SDL_LogMessageV(int category, + SDL_LogPriority priority, + const char *fmt, va_list ap); + +/** + * \brief The prototype for the log output function + */ +typedef void (*SDL_LogOutputFunction)(void *userdata, int category, SDL_LogPriority priority, const char *message); + +/** + * \brief Get the current log output function. + */ +extern DECLSPEC void SDLCALL SDL_LogGetOutputFunction(SDL_LogOutputFunction *callback, void **userdata); + +/** + * \brief This function allows you to replace the default log output + * function with one of your own. + */ +extern DECLSPEC void SDLCALL SDL_LogSetOutputFunction(SDL_LogOutputFunction callback, void *userdata); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_log_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_main.h b/src/SDL2/SDL_main.h new file mode 100644 index 000000000..bbb7e859b --- /dev/null +++ b/src/SDL2/SDL_main.h @@ -0,0 +1,125 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef _SDL_main_h +#define _SDL_main_h + +#include "SDL_stdinc.h" + +/** + * \file SDL_main.h + * + * Redefine main() on some platforms so that it is called by SDL. + */ + +#ifndef SDL_MAIN_HANDLED +#if defined(__WIN32__) +/* On Windows SDL provides WinMain(), which parses the command line and passes + the arguments to your main function. + + If you provide your own WinMain(), you may define SDL_MAIN_HANDLED + */ +#define SDL_MAIN_AVAILABLE + +#elif defined(__IPHONEOS__) +/* On iOS SDL provides a main function that creates an application delegate + and starts the iOS application run loop. + + See src/video/uikit/SDL_uikitappdelegate.m for more details. + */ +#define SDL_MAIN_NEEDED + +#elif defined(__ANDROID__) +/* On Android SDL provides a Java class in SDLActivity.java that is the + main activity entry point. + + See README-android.txt for more details on extending that class. + */ +#define SDL_MAIN_NEEDED + +#endif +#endif /* SDL_MAIN_HANDLED */ + +#ifdef __cplusplus +#define C_LINKAGE "C" +#else +#define C_LINKAGE +#endif /* __cplusplus */ + +/** + * \file SDL_main.h + * + * The application's main() function must be called with C linkage, + * and should be declared like this: + * \code + * #ifdef __cplusplus + * extern "C" + * #endif + * int main(int argc, char *argv[]) + * { + * } + * \endcode + */ + +#if defined(SDL_MAIN_NEEDED) || defined(SDL_MAIN_AVAILABLE) +#define main SDL_main +#endif + +/** + * The prototype for the application's main() function + */ +extern C_LINKAGE int SDL_main(int argc, char *argv[]); + + +#include "begin_code.h" +#ifdef __cplusplus +extern "C" { +#endif + +/* + * This is called by the real SDL main function to let the rest of the + * library know that initialization was done properly. + * + * Calling this yourself without knowing what you're doing can cause + * crashes and hard to diagnose problems with your application. + */ +extern DECLSPEC void SDL_SetMainReady(void); + +#ifdef __WIN32__ + +/** + * This can be called to set the application class at startup + */ +extern DECLSPEC int SDLCALL SDL_RegisterApp(char *name, Uint32 style, + void *hInst); +extern DECLSPEC void SDLCALL SDL_UnregisterApp(void); + +#endif /* __WIN32__ */ + + +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_main_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_messagebox.h b/src/SDL2/SDL_messagebox.h new file mode 100644 index 000000000..cb1a1ccff --- /dev/null +++ b/src/SDL2/SDL_messagebox.h @@ -0,0 +1,144 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef _SDL_messagebox_h +#define _SDL_messagebox_h + +#include "SDL_stdinc.h" +#include "SDL_video.h" /* For SDL_Window */ + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief SDL_MessageBox flags. If supported will display warning icon, etc. + */ +typedef enum +{ + SDL_MESSAGEBOX_ERROR = 0x00000010, /**< error dialog */ + SDL_MESSAGEBOX_WARNING = 0x00000020, /**< warning dialog */ + SDL_MESSAGEBOX_INFORMATION = 0x00000040 /**< informational dialog */ +} SDL_MessageBoxFlags; + +/** + * \brief Flags for SDL_MessageBoxButtonData. + */ +typedef enum +{ + SDL_MESSAGEBOX_BUTTON_RETURNKEY_DEFAULT = 0x00000001, /**< Marks the default button when return is hit */ + SDL_MESSAGEBOX_BUTTON_ESCAPEKEY_DEFAULT = 0x00000002 /**< Marks the default button when escape is hit */ +} SDL_MessageBoxButtonFlags; + +/** + * \brief Individual button data. + */ +typedef struct +{ + Uint32 flags; /**< ::SDL_MessageBoxButtonFlags */ + int buttonid; /**< User defined button id (value returned via SDL_ShowMessageBox) */ + const char * text; /**< The UTF-8 button text */ +} SDL_MessageBoxButtonData; + +/** + * \brief RGB value used in a message box color scheme + */ +typedef struct +{ + Uint8 r, g, b; +} SDL_MessageBoxColor; + +typedef enum +{ + SDL_MESSAGEBOX_COLOR_BACKGROUND, + SDL_MESSAGEBOX_COLOR_TEXT, + SDL_MESSAGEBOX_COLOR_BUTTON_BORDER, + SDL_MESSAGEBOX_COLOR_BUTTON_BACKGROUND, + SDL_MESSAGEBOX_COLOR_BUTTON_SELECTED, + SDL_MESSAGEBOX_COLOR_MAX +} SDL_MessageBoxColorType; + +/** + * \brief A set of colors to use for message box dialogs + */ +typedef struct +{ + SDL_MessageBoxColor colors[SDL_MESSAGEBOX_COLOR_MAX]; +} SDL_MessageBoxColorScheme; + +/** + * \brief MessageBox structure containing title, text, window, etc. + */ +typedef struct +{ + Uint32 flags; /**< ::SDL_MessageBoxFlags */ + SDL_Window *window; /**< Parent window, can be NULL */ + const char *title; /**< UTF-8 title */ + const char *message; /**< UTF-8 message text */ + + int numbuttons; + const SDL_MessageBoxButtonData *buttons; + + const SDL_MessageBoxColorScheme *colorScheme; /**< ::SDL_MessageBoxColorScheme, can be NULL to use system settings */ +} SDL_MessageBoxData; + +/** + * \brief Create a modal message box. + * + * \param messageboxdata The SDL_MessageBoxData structure with title, text, etc. + * \param buttonid The pointer to which user id of hit button should be copied. + * + * \return -1 on error, otherwise 0 and buttonid contains user id of button + * hit or -1 if dialog was closed. + * + * \note This function should be called on the thread that created the parent + * window, or on the main thread if the messagebox has no parent. It will + * block execution of that thread until the user clicks a button or + * closes the messagebox. + */ +extern DECLSPEC int SDLCALL SDL_ShowMessageBox(const SDL_MessageBoxData *messageboxdata, int *buttonid); + +/** + * \brief Create a simple modal message box + * + * \param flags ::SDL_MessageBoxFlags + * \param title UTF-8 title text + * \param message UTF-8 message text + * \param window The parent window, or NULL for no parent + * + * \return 0 on success, -1 on error + * + * \sa SDL_ShowMessageBox + */ +extern DECLSPEC int SDLCALL SDL_ShowSimpleMessageBox(Uint32 flags, const char *title, const char *message, SDL_Window *window); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_messagebox_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_mouse.h b/src/SDL2/SDL_mouse.h new file mode 100644 index 000000000..36c29e90a --- /dev/null +++ b/src/SDL2/SDL_mouse.h @@ -0,0 +1,224 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_mouse.h + * + * Include file for SDL mouse event handling. + */ + +#ifndef _SDL_mouse_h +#define _SDL_mouse_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_video.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +typedef struct SDL_Cursor SDL_Cursor; /* Implementation dependent */ + +/** + * \brief Cursor types for SDL_CreateSystemCursor. + */ +typedef enum +{ + SDL_SYSTEM_CURSOR_ARROW, /**< Arrow */ + SDL_SYSTEM_CURSOR_IBEAM, /**< I-beam */ + SDL_SYSTEM_CURSOR_WAIT, /**< Wait */ + SDL_SYSTEM_CURSOR_CROSSHAIR, /**< Crosshair */ + SDL_SYSTEM_CURSOR_WAITARROW, /**< Small wait cursor (or Wait if not available) */ + SDL_SYSTEM_CURSOR_SIZENWSE, /**< Double arrow pointing northwest and southeast */ + SDL_SYSTEM_CURSOR_SIZENESW, /**< Double arrow pointing northeast and southwest */ + SDL_SYSTEM_CURSOR_SIZEWE, /**< Double arrow pointing west and east */ + SDL_SYSTEM_CURSOR_SIZENS, /**< Double arrow pointing north and south */ + SDL_SYSTEM_CURSOR_SIZEALL, /**< Four pointed arrow pointing north, south, east, and west */ + SDL_SYSTEM_CURSOR_NO, /**< Slashed circle or crossbones */ + SDL_SYSTEM_CURSOR_HAND, /**< Hand */ + SDL_NUM_SYSTEM_CURSORS +} SDL_SystemCursor; + +/* Function prototypes */ + +/** + * \brief Get the window which currently has mouse focus. + */ +extern DECLSPEC SDL_Window * SDLCALL SDL_GetMouseFocus(void); + +/** + * \brief Retrieve the current state of the mouse. + * + * The current button state is returned as a button bitmask, which can + * be tested using the SDL_BUTTON(X) macros, and x and y are set to the + * mouse cursor position relative to the focus window for the currently + * selected mouse. You can pass NULL for either x or y. + */ +extern DECLSPEC Uint32 SDLCALL SDL_GetMouseState(int *x, int *y); + +/** + * \brief Retrieve the relative state of the mouse. + * + * The current button state is returned as a button bitmask, which can + * be tested using the SDL_BUTTON(X) macros, and x and y are set to the + * mouse deltas since the last call to SDL_GetRelativeMouseState(). + */ +extern DECLSPEC Uint32 SDLCALL SDL_GetRelativeMouseState(int *x, int *y); + +/** + * \brief Moves the mouse to the given position within the window. + * + * \param window The window to move the mouse into, or NULL for the current mouse focus + * \param x The x coordinate within the window + * \param y The y coordinate within the window + * + * \note This function generates a mouse motion event + */ +extern DECLSPEC void SDLCALL SDL_WarpMouseInWindow(SDL_Window * window, + int x, int y); + +/** + * \brief Set relative mouse mode. + * + * \param enabled Whether or not to enable relative mode + * + * \return 0 on success, or -1 if relative mode is not supported. + * + * While the mouse is in relative mode, the cursor is hidden, and the + * driver will try to report continuous motion in the current window. + * Only relative motion events will be delivered, the mouse position + * will not change. + * + * \note This function will flush any pending mouse motion. + * + * \sa SDL_GetRelativeMouseMode() + */ +extern DECLSPEC int SDLCALL SDL_SetRelativeMouseMode(SDL_bool enabled); + +/** + * \brief Query whether relative mouse mode is enabled. + * + * \sa SDL_SetRelativeMouseMode() + */ +extern DECLSPEC SDL_bool SDLCALL SDL_GetRelativeMouseMode(void); + +/** + * \brief Create a cursor, using the specified bitmap data and + * mask (in MSB format). + * + * The cursor width must be a multiple of 8 bits. + * + * The cursor is created in black and white according to the following: + * + * + * + * + * + * + *
data mask resulting pixel on screen
0 1 White
1 1 Black
0 0 Transparent
1 0 Inverted color if possible, black + * if not.
+ * + * \sa SDL_FreeCursor() + */ +extern DECLSPEC SDL_Cursor *SDLCALL SDL_CreateCursor(const Uint8 * data, + const Uint8 * mask, + int w, int h, int hot_x, + int hot_y); + +/** + * \brief Create a color cursor. + * + * \sa SDL_FreeCursor() + */ +extern DECLSPEC SDL_Cursor *SDLCALL SDL_CreateColorCursor(SDL_Surface *surface, + int hot_x, + int hot_y); + +/** + * \brief Create a system cursor. + * + * \sa SDL_FreeCursor() + */ +extern DECLSPEC SDL_Cursor *SDLCALL SDL_CreateSystemCursor(SDL_SystemCursor id); + +/** + * \brief Set the active cursor. + */ +extern DECLSPEC void SDLCALL SDL_SetCursor(SDL_Cursor * cursor); + +/** + * \brief Return the active cursor. + */ +extern DECLSPEC SDL_Cursor *SDLCALL SDL_GetCursor(void); + +/** + * \brief Return the default cursor. + */ +extern DECLSPEC SDL_Cursor *SDLCALL SDL_GetDefaultCursor(void); + +/** + * \brief Frees a cursor created with SDL_CreateCursor(). + * + * \sa SDL_CreateCursor() + */ +extern DECLSPEC void SDLCALL SDL_FreeCursor(SDL_Cursor * cursor); + +/** + * \brief Toggle whether or not the cursor is shown. + * + * \param toggle 1 to show the cursor, 0 to hide it, -1 to query the current + * state. + * + * \return 1 if the cursor is shown, or 0 if the cursor is hidden. + */ +extern DECLSPEC int SDLCALL SDL_ShowCursor(int toggle); + +/** + * Used as a mask when testing buttons in buttonstate. + * - Button 1: Left mouse button + * - Button 2: Middle mouse button + * - Button 3: Right mouse button + */ +#define SDL_BUTTON(X) (1 << ((X)-1)) +#define SDL_BUTTON_LEFT 1 +#define SDL_BUTTON_MIDDLE 2 +#define SDL_BUTTON_RIGHT 3 +#define SDL_BUTTON_X1 4 +#define SDL_BUTTON_X2 5 +#define SDL_BUTTON_LMASK SDL_BUTTON(SDL_BUTTON_LEFT) +#define SDL_BUTTON_MMASK SDL_BUTTON(SDL_BUTTON_MIDDLE) +#define SDL_BUTTON_RMASK SDL_BUTTON(SDL_BUTTON_RIGHT) +#define SDL_BUTTON_X1MASK SDL_BUTTON(SDL_BUTTON_X1) +#define SDL_BUTTON_X2MASK SDL_BUTTON(SDL_BUTTON_X2) + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_mouse_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_mutex.h b/src/SDL2/SDL_mutex.h new file mode 100644 index 000000000..3efc4a890 --- /dev/null +++ b/src/SDL2/SDL_mutex.h @@ -0,0 +1,251 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef _SDL_mutex_h +#define _SDL_mutex_h + +/** + * \file SDL_mutex.h + * + * Functions to provide thread synchronization primitives. + */ + +#include "SDL_stdinc.h" +#include "SDL_error.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Synchronization functions which can time out return this value + * if they time out. + */ +#define SDL_MUTEX_TIMEDOUT 1 + +/** + * This is the timeout value which corresponds to never time out. + */ +#define SDL_MUTEX_MAXWAIT (~(Uint32)0) + + +/** + * \name Mutex functions + */ +/*@{*/ + +/* The SDL mutex structure, defined in SDL_mutex.c */ +struct SDL_mutex; +typedef struct SDL_mutex SDL_mutex; + +/** + * Create a mutex, initialized unlocked. + */ +extern DECLSPEC SDL_mutex *SDLCALL SDL_CreateMutex(void); + +/** + * Lock the mutex. + * + * \return 0, or -1 on error. + */ +#define SDL_mutexP(m) SDL_LockMutex(m) +extern DECLSPEC int SDLCALL SDL_LockMutex(SDL_mutex * mutex); + +/** + * Try to lock the mutex + * + * \return 0, SDL_MUTEX_TIMEDOUT, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_TryLockMutex(SDL_mutex * mutex); + +/** + * Unlock the mutex. + * + * \return 0, or -1 on error. + * + * \warning It is an error to unlock a mutex that has not been locked by + * the current thread, and doing so results in undefined behavior. + */ +#define SDL_mutexV(m) SDL_UnlockMutex(m) +extern DECLSPEC int SDLCALL SDL_UnlockMutex(SDL_mutex * mutex); + +/** + * Destroy a mutex. + */ +extern DECLSPEC void SDLCALL SDL_DestroyMutex(SDL_mutex * mutex); + +/*@}*//*Mutex functions*/ + + +/** + * \name Semaphore functions + */ +/*@{*/ + +/* The SDL semaphore structure, defined in SDL_sem.c */ +struct SDL_semaphore; +typedef struct SDL_semaphore SDL_sem; + +/** + * Create a semaphore, initialized with value, returns NULL on failure. + */ +extern DECLSPEC SDL_sem *SDLCALL SDL_CreateSemaphore(Uint32 initial_value); + +/** + * Destroy a semaphore. + */ +extern DECLSPEC void SDLCALL SDL_DestroySemaphore(SDL_sem * sem); + +/** + * This function suspends the calling thread until the semaphore pointed + * to by \c sem has a positive count. It then atomically decreases the + * semaphore count. + */ +extern DECLSPEC int SDLCALL SDL_SemWait(SDL_sem * sem); + +/** + * Non-blocking variant of SDL_SemWait(). + * + * \return 0 if the wait succeeds, ::SDL_MUTEX_TIMEDOUT if the wait would + * block, and -1 on error. + */ +extern DECLSPEC int SDLCALL SDL_SemTryWait(SDL_sem * sem); + +/** + * Variant of SDL_SemWait() with a timeout in milliseconds. + * + * \return 0 if the wait succeeds, ::SDL_MUTEX_TIMEDOUT if the wait does not + * succeed in the allotted time, and -1 on error. + * + * \warning On some platforms this function is implemented by looping with a + * delay of 1 ms, and so should be avoided if possible. + */ +extern DECLSPEC int SDLCALL SDL_SemWaitTimeout(SDL_sem * sem, Uint32 ms); + +/** + * Atomically increases the semaphore's count (not blocking). + * + * \return 0, or -1 on error. + */ +extern DECLSPEC int SDLCALL SDL_SemPost(SDL_sem * sem); + +/** + * Returns the current count of the semaphore. + */ +extern DECLSPEC Uint32 SDLCALL SDL_SemValue(SDL_sem * sem); + +/*@}*//*Semaphore functions*/ + + +/** + * \name Condition variable functions + */ +/*@{*/ + +/* The SDL condition variable structure, defined in SDL_cond.c */ +struct SDL_cond; +typedef struct SDL_cond SDL_cond; + +/** + * Create a condition variable. + * + * Typical use of condition variables: + * + * Thread A: + * SDL_LockMutex(lock); + * while ( ! condition ) { + * SDL_CondWait(cond, lock); + * } + * SDL_UnlockMutex(lock); + * + * Thread B: + * SDL_LockMutex(lock); + * ... + * condition = true; + * ... + * SDL_CondSignal(cond); + * SDL_UnlockMutex(lock); + * + * There is some discussion whether to signal the condition variable + * with the mutex locked or not. There is some potential performance + * benefit to unlocking first on some platforms, but there are some + * potential race conditions depending on how your code is structured. + * + * In general it's safer to signal the condition variable while the + * mutex is locked. + */ +extern DECLSPEC SDL_cond *SDLCALL SDL_CreateCond(void); + +/** + * Destroy a condition variable. + */ +extern DECLSPEC void SDLCALL SDL_DestroyCond(SDL_cond * cond); + +/** + * Restart one of the threads that are waiting on the condition variable. + * + * \return 0 or -1 on error. + */ +extern DECLSPEC int SDLCALL SDL_CondSignal(SDL_cond * cond); + +/** + * Restart all threads that are waiting on the condition variable. + * + * \return 0 or -1 on error. + */ +extern DECLSPEC int SDLCALL SDL_CondBroadcast(SDL_cond * cond); + +/** + * Wait on the condition variable, unlocking the provided mutex. + * + * \warning The mutex must be locked before entering this function! + * + * The mutex is re-locked once the condition variable is signaled. + * + * \return 0 when it is signaled, or -1 on error. + */ +extern DECLSPEC int SDLCALL SDL_CondWait(SDL_cond * cond, SDL_mutex * mutex); + +/** + * Waits for at most \c ms milliseconds, and returns 0 if the condition + * variable is signaled, ::SDL_MUTEX_TIMEDOUT if the condition is not + * signaled in the allotted time, and -1 on error. + * + * \warning On some platforms this function is implemented by looping with a + * delay of 1 ms, and so should be avoided if possible. + */ +extern DECLSPEC int SDLCALL SDL_CondWaitTimeout(SDL_cond * cond, + SDL_mutex * mutex, Uint32 ms); + +/*@}*//*Condition variable functions*/ + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_mutex_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_name.h b/src/SDL2/SDL_name.h new file mode 100644 index 000000000..d0469e1f2 --- /dev/null +++ b/src/SDL2/SDL_name.h @@ -0,0 +1,11 @@ + +#ifndef _SDLname_h_ +#define _SDLname_h_ + +#if defined(__STDC__) || defined(__cplusplus) +#define NeedFunctionPrototypes 1 +#endif + +#define SDL_NAME(X) SDL_##X + +#endif /* _SDLname_h_ */ diff --git a/src/SDL2/SDL_opengl.h b/src/SDL2/SDL_opengl.h new file mode 100644 index 000000000..2f120aa95 --- /dev/null +++ b/src/SDL2/SDL_opengl.h @@ -0,0 +1,11126 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_opengl.h + * + * This is a simple file to encapsulate the OpenGL API headers. + */ + +#ifndef _SDL_opengl_h +#define _SDL_opengl_h + +#include "SDL_config.h" + +#ifndef __IPHONEOS__ + +#ifdef __WIN32__ +#define WIN32_LEAN_AND_MEAN +#ifndef NOMINMAX +#define NOMINMAX /* Don't defined min() and max() */ +#endif +#include +#endif + +#ifdef __glext_h_ +/* Someone has already included glext.h */ +#define NO_SDL_GLEXT +#endif +#ifndef NO_SDL_GLEXT +#define __glext_h_ /* Don't let gl.h include glext.h */ +#endif +#if defined(__MACOSX__) +#include /* Header File For The OpenGL Library */ +#define __X_GL_H +#else +#include /* Header File For The OpenGL Library */ +#endif +#ifndef NO_SDL_GLEXT +#undef __glext_h_ +#endif + +/** + * \file SDL_opengl.h + * + * This file is included because glext.h is not available on some systems. + * If you don't want this version included, simply define ::NO_SDL_GLEXT. + * + * The latest version is available from: + * http://www.opengl.org/registry/ + */ + +/** + * \def NO_SDL_GLEXT + * + * Define this if you have your own version of glext.h and want to disable the + * version included in SDL_opengl.h. + */ + +#if !defined(NO_SDL_GLEXT) && !defined(GL_GLEXT_LEGACY) +#ifndef __glext_h_ +#define __glext_h_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* +** Copyright (c) 2007-2010 The Khronos Group Inc. +** +** Permission is hereby granted, free of charge, to any person obtaining a +** copy of this software and/or associated documentation files (the +** "Materials"), to deal in the Materials without restriction, including +** without limitation the rights to use, copy, modify, merge, publish, +** distribute, sublicense, and/or sell copies of the Materials, and to +** permit persons to whom the Materials are furnished to do so, subject to +** the following conditions: +** +** The above copyright notice and this permission notice shall be included +** in all copies or substantial portions of the Materials. +** +** THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY +** CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +** MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS. +*/ + +/* Header file version number, required by OpenGL ABI for Linux */ +/* glext.h last updated $Date: 2010-08-03 01:30:25 -0700 (Tue, 03 Aug 2010) $ */ +/* Current version at http://www.opengl.org/registry/ */ +#define GL_GLEXT_VERSION 64 +/* Function declaration macros - to move into glplatform.h */ + +#if defined(_WIN32) && !defined(APIENTRY) && !defined(__CYGWIN__) && !defined(__SCITECH_SNAP__) +#define WIN32_LEAN_AND_MEAN 1 +#include +#endif + +#ifndef APIENTRY +#define APIENTRY +#endif +#ifndef APIENTRYP +#define APIENTRYP APIENTRY * +#endif +#ifndef GLAPI +#define GLAPI extern +#endif + +/*************************************************************/ + +#ifndef GL_VERSION_1_2 +#define GL_UNSIGNED_BYTE_3_3_2 0x8032 +#define GL_UNSIGNED_SHORT_4_4_4_4 0x8033 +#define GL_UNSIGNED_SHORT_5_5_5_1 0x8034 +#define GL_UNSIGNED_INT_8_8_8_8 0x8035 +#define GL_UNSIGNED_INT_10_10_10_2 0x8036 +#define GL_TEXTURE_BINDING_3D 0x806A +#define GL_PACK_SKIP_IMAGES 0x806B +#define GL_PACK_IMAGE_HEIGHT 0x806C +#define GL_UNPACK_SKIP_IMAGES 0x806D +#define GL_UNPACK_IMAGE_HEIGHT 0x806E +#define GL_TEXTURE_3D 0x806F +#define GL_PROXY_TEXTURE_3D 0x8070 +#define GL_TEXTURE_DEPTH 0x8071 +#define GL_TEXTURE_WRAP_R 0x8072 +#define GL_MAX_3D_TEXTURE_SIZE 0x8073 +#define GL_UNSIGNED_BYTE_2_3_3_REV 0x8362 +#define GL_UNSIGNED_SHORT_5_6_5 0x8363 +#define GL_UNSIGNED_SHORT_5_6_5_REV 0x8364 +#define GL_UNSIGNED_SHORT_4_4_4_4_REV 0x8365 +#define GL_UNSIGNED_SHORT_1_5_5_5_REV 0x8366 +#define GL_UNSIGNED_INT_8_8_8_8_REV 0x8367 +#define GL_UNSIGNED_INT_2_10_10_10_REV 0x8368 +#define GL_BGR 0x80E0 +#define GL_BGRA 0x80E1 +#define GL_MAX_ELEMENTS_VERTICES 0x80E8 +#define GL_MAX_ELEMENTS_INDICES 0x80E9 +#define GL_CLAMP_TO_EDGE 0x812F +#define GL_TEXTURE_MIN_LOD 0x813A +#define GL_TEXTURE_MAX_LOD 0x813B +#define GL_TEXTURE_BASE_LEVEL 0x813C +#define GL_TEXTURE_MAX_LEVEL 0x813D +#define GL_SMOOTH_POINT_SIZE_RANGE 0x0B12 +#define GL_SMOOTH_POINT_SIZE_GRANULARITY 0x0B13 +#define GL_SMOOTH_LINE_WIDTH_RANGE 0x0B22 +#define GL_SMOOTH_LINE_WIDTH_GRANULARITY 0x0B23 +#define GL_ALIASED_LINE_WIDTH_RANGE 0x846E +#endif + +#ifndef GL_VERSION_1_2_DEPRECATED +#define GL_RESCALE_NORMAL 0x803A +#define GL_LIGHT_MODEL_COLOR_CONTROL 0x81F8 +#define GL_SINGLE_COLOR 0x81F9 +#define GL_SEPARATE_SPECULAR_COLOR 0x81FA +#define GL_ALIASED_POINT_SIZE_RANGE 0x846D +#endif + +#ifndef GL_ARB_imaging +#define GL_CONSTANT_COLOR 0x8001 +#define GL_ONE_MINUS_CONSTANT_COLOR 0x8002 +#define GL_CONSTANT_ALPHA 0x8003 +#define GL_ONE_MINUS_CONSTANT_ALPHA 0x8004 +#define GL_BLEND_COLOR 0x8005 +#define GL_FUNC_ADD 0x8006 +#define GL_MIN 0x8007 +#define GL_MAX 0x8008 +#define GL_BLEND_EQUATION 0x8009 +#define GL_FUNC_SUBTRACT 0x800A +#define GL_FUNC_REVERSE_SUBTRACT 0x800B +#endif + +#ifndef GL_ARB_imaging_DEPRECATED +#define GL_CONVOLUTION_1D 0x8010 +#define GL_CONVOLUTION_2D 0x8011 +#define GL_SEPARABLE_2D 0x8012 +#define GL_CONVOLUTION_BORDER_MODE 0x8013 +#define GL_CONVOLUTION_FILTER_SCALE 0x8014 +#define GL_CONVOLUTION_FILTER_BIAS 0x8015 +#define GL_REDUCE 0x8016 +#define GL_CONVOLUTION_FORMAT 0x8017 +#define GL_CONVOLUTION_WIDTH 0x8018 +#define GL_CONVOLUTION_HEIGHT 0x8019 +#define GL_MAX_CONVOLUTION_WIDTH 0x801A +#define GL_MAX_CONVOLUTION_HEIGHT 0x801B +#define GL_POST_CONVOLUTION_RED_SCALE 0x801C +#define GL_POST_CONVOLUTION_GREEN_SCALE 0x801D +#define GL_POST_CONVOLUTION_BLUE_SCALE 0x801E +#define GL_POST_CONVOLUTION_ALPHA_SCALE 0x801F +#define GL_POST_CONVOLUTION_RED_BIAS 0x8020 +#define GL_POST_CONVOLUTION_GREEN_BIAS 0x8021 +#define GL_POST_CONVOLUTION_BLUE_BIAS 0x8022 +#define GL_POST_CONVOLUTION_ALPHA_BIAS 0x8023 +#define GL_HISTOGRAM 0x8024 +#define GL_PROXY_HISTOGRAM 0x8025 +#define GL_HISTOGRAM_WIDTH 0x8026 +#define GL_HISTOGRAM_FORMAT 0x8027 +#define GL_HISTOGRAM_RED_SIZE 0x8028 +#define GL_HISTOGRAM_GREEN_SIZE 0x8029 +#define GL_HISTOGRAM_BLUE_SIZE 0x802A +#define GL_HISTOGRAM_ALPHA_SIZE 0x802B +#define GL_HISTOGRAM_LUMINANCE_SIZE 0x802C +#define GL_HISTOGRAM_SINK 0x802D +#define GL_MINMAX 0x802E +#define GL_MINMAX_FORMAT 0x802F +#define GL_MINMAX_SINK 0x8030 +#define GL_TABLE_TOO_LARGE 0x8031 +#define GL_COLOR_MATRIX 0x80B1 +#define GL_COLOR_MATRIX_STACK_DEPTH 0x80B2 +#define GL_MAX_COLOR_MATRIX_STACK_DEPTH 0x80B3 +#define GL_POST_COLOR_MATRIX_RED_SCALE 0x80B4 +#define GL_POST_COLOR_MATRIX_GREEN_SCALE 0x80B5 +#define GL_POST_COLOR_MATRIX_BLUE_SCALE 0x80B6 +#define GL_POST_COLOR_MATRIX_ALPHA_SCALE 0x80B7 +#define GL_POST_COLOR_MATRIX_RED_BIAS 0x80B8 +#define GL_POST_COLOR_MATRIX_GREEN_BIAS 0x80B9 +#define GL_POST_COLOR_MATRIX_BLUE_BIAS 0x80BA +#define GL_POST_COLOR_MATRIX_ALPHA_BIAS 0x80BB +#define GL_COLOR_TABLE 0x80D0 +#define GL_POST_CONVOLUTION_COLOR_TABLE 0x80D1 +#define GL_POST_COLOR_MATRIX_COLOR_TABLE 0x80D2 +#define GL_PROXY_COLOR_TABLE 0x80D3 +#define GL_PROXY_POST_CONVOLUTION_COLOR_TABLE 0x80D4 +#define GL_PROXY_POST_COLOR_MATRIX_COLOR_TABLE 0x80D5 +#define GL_COLOR_TABLE_SCALE 0x80D6 +#define GL_COLOR_TABLE_BIAS 0x80D7 +#define GL_COLOR_TABLE_FORMAT 0x80D8 +#define GL_COLOR_TABLE_WIDTH 0x80D9 +#define GL_COLOR_TABLE_RED_SIZE 0x80DA +#define GL_COLOR_TABLE_GREEN_SIZE 0x80DB +#define GL_COLOR_TABLE_BLUE_SIZE 0x80DC +#define GL_COLOR_TABLE_ALPHA_SIZE 0x80DD +#define GL_COLOR_TABLE_LUMINANCE_SIZE 0x80DE +#define GL_COLOR_TABLE_INTENSITY_SIZE 0x80DF +#define GL_CONSTANT_BORDER 0x8151 +#define GL_REPLICATE_BORDER 0x8153 +#define GL_CONVOLUTION_BORDER_COLOR 0x8154 +#endif + +#ifndef GL_VERSION_1_3 +#define GL_TEXTURE0 0x84C0 +#define GL_TEXTURE1 0x84C1 +#define GL_TEXTURE2 0x84C2 +#define GL_TEXTURE3 0x84C3 +#define GL_TEXTURE4 0x84C4 +#define GL_TEXTURE5 0x84C5 +#define GL_TEXTURE6 0x84C6 +#define GL_TEXTURE7 0x84C7 +#define GL_TEXTURE8 0x84C8 +#define GL_TEXTURE9 0x84C9 +#define GL_TEXTURE10 0x84CA +#define GL_TEXTURE11 0x84CB +#define GL_TEXTURE12 0x84CC +#define GL_TEXTURE13 0x84CD +#define GL_TEXTURE14 0x84CE +#define GL_TEXTURE15 0x84CF +#define GL_TEXTURE16 0x84D0 +#define GL_TEXTURE17 0x84D1 +#define GL_TEXTURE18 0x84D2 +#define GL_TEXTURE19 0x84D3 +#define GL_TEXTURE20 0x84D4 +#define GL_TEXTURE21 0x84D5 +#define GL_TEXTURE22 0x84D6 +#define GL_TEXTURE23 0x84D7 +#define GL_TEXTURE24 0x84D8 +#define GL_TEXTURE25 0x84D9 +#define GL_TEXTURE26 0x84DA +#define GL_TEXTURE27 0x84DB +#define GL_TEXTURE28 0x84DC +#define GL_TEXTURE29 0x84DD +#define GL_TEXTURE30 0x84DE +#define GL_TEXTURE31 0x84DF +#define GL_ACTIVE_TEXTURE 0x84E0 +#define GL_MULTISAMPLE 0x809D +#define GL_SAMPLE_ALPHA_TO_COVERAGE 0x809E +#define GL_SAMPLE_ALPHA_TO_ONE 0x809F +#define GL_SAMPLE_COVERAGE 0x80A0 +#define GL_SAMPLE_BUFFERS 0x80A8 +#define GL_SAMPLES 0x80A9 +#define GL_SAMPLE_COVERAGE_VALUE 0x80AA +#define GL_SAMPLE_COVERAGE_INVERT 0x80AB +#define GL_TEXTURE_CUBE_MAP 0x8513 +#define GL_TEXTURE_BINDING_CUBE_MAP 0x8514 +#define GL_TEXTURE_CUBE_MAP_POSITIVE_X 0x8515 +#define GL_TEXTURE_CUBE_MAP_NEGATIVE_X 0x8516 +#define GL_TEXTURE_CUBE_MAP_POSITIVE_Y 0x8517 +#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Y 0x8518 +#define GL_TEXTURE_CUBE_MAP_POSITIVE_Z 0x8519 +#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Z 0x851A +#define GL_PROXY_TEXTURE_CUBE_MAP 0x851B +#define GL_MAX_CUBE_MAP_TEXTURE_SIZE 0x851C +#define GL_COMPRESSED_RGB 0x84ED +#define GL_COMPRESSED_RGBA 0x84EE +#define GL_TEXTURE_COMPRESSION_HINT 0x84EF +#define GL_TEXTURE_COMPRESSED_IMAGE_SIZE 0x86A0 +#define GL_TEXTURE_COMPRESSED 0x86A1 +#define GL_NUM_COMPRESSED_TEXTURE_FORMATS 0x86A2 +#define GL_COMPRESSED_TEXTURE_FORMATS 0x86A3 +#define GL_CLAMP_TO_BORDER 0x812D +#endif + +#ifndef GL_VERSION_1_3_DEPRECATED +#define GL_CLIENT_ACTIVE_TEXTURE 0x84E1 +#define GL_MAX_TEXTURE_UNITS 0x84E2 +#define GL_TRANSPOSE_MODELVIEW_MATRIX 0x84E3 +#define GL_TRANSPOSE_PROJECTION_MATRIX 0x84E4 +#define GL_TRANSPOSE_TEXTURE_MATRIX 0x84E5 +#define GL_TRANSPOSE_COLOR_MATRIX 0x84E6 +#define GL_MULTISAMPLE_BIT 0x20000000 +#define GL_NORMAL_MAP 0x8511 +#define GL_REFLECTION_MAP 0x8512 +#define GL_COMPRESSED_ALPHA 0x84E9 +#define GL_COMPRESSED_LUMINANCE 0x84EA +#define GL_COMPRESSED_LUMINANCE_ALPHA 0x84EB +#define GL_COMPRESSED_INTENSITY 0x84EC +#define GL_COMBINE 0x8570 +#define GL_COMBINE_RGB 0x8571 +#define GL_COMBINE_ALPHA 0x8572 +#define GL_SOURCE0_RGB 0x8580 +#define GL_SOURCE1_RGB 0x8581 +#define GL_SOURCE2_RGB 0x8582 +#define GL_SOURCE0_ALPHA 0x8588 +#define GL_SOURCE1_ALPHA 0x8589 +#define GL_SOURCE2_ALPHA 0x858A +#define GL_OPERAND0_RGB 0x8590 +#define GL_OPERAND1_RGB 0x8591 +#define GL_OPERAND2_RGB 0x8592 +#define GL_OPERAND0_ALPHA 0x8598 +#define GL_OPERAND1_ALPHA 0x8599 +#define GL_OPERAND2_ALPHA 0x859A +#define GL_RGB_SCALE 0x8573 +#define GL_ADD_SIGNED 0x8574 +#define GL_INTERPOLATE 0x8575 +#define GL_SUBTRACT 0x84E7 +#define GL_CONSTANT 0x8576 +#define GL_PRIMARY_COLOR 0x8577 +#define GL_PREVIOUS 0x8578 +#define GL_DOT3_RGB 0x86AE +#define GL_DOT3_RGBA 0x86AF +#endif + +#ifndef GL_VERSION_1_4 +#define GL_BLEND_DST_RGB 0x80C8 +#define GL_BLEND_SRC_RGB 0x80C9 +#define GL_BLEND_DST_ALPHA 0x80CA +#define GL_BLEND_SRC_ALPHA 0x80CB +#define GL_POINT_FADE_THRESHOLD_SIZE 0x8128 +#define GL_DEPTH_COMPONENT16 0x81A5 +#define GL_DEPTH_COMPONENT24 0x81A6 +#define GL_DEPTH_COMPONENT32 0x81A7 +#define GL_MIRRORED_REPEAT 0x8370 +#define GL_MAX_TEXTURE_LOD_BIAS 0x84FD +#define GL_TEXTURE_LOD_BIAS 0x8501 +#define GL_INCR_WRAP 0x8507 +#define GL_DECR_WRAP 0x8508 +#define GL_TEXTURE_DEPTH_SIZE 0x884A +#define GL_TEXTURE_COMPARE_MODE 0x884C +#define GL_TEXTURE_COMPARE_FUNC 0x884D +#endif + +#ifndef GL_VERSION_1_4_DEPRECATED +#define GL_POINT_SIZE_MIN 0x8126 +#define GL_POINT_SIZE_MAX 0x8127 +#define GL_POINT_DISTANCE_ATTENUATION 0x8129 +#define GL_GENERATE_MIPMAP 0x8191 +#define GL_GENERATE_MIPMAP_HINT 0x8192 +#define GL_FOG_COORDINATE_SOURCE 0x8450 +#define GL_FOG_COORDINATE 0x8451 +#define GL_FRAGMENT_DEPTH 0x8452 +#define GL_CURRENT_FOG_COORDINATE 0x8453 +#define GL_FOG_COORDINATE_ARRAY_TYPE 0x8454 +#define GL_FOG_COORDINATE_ARRAY_STRIDE 0x8455 +#define GL_FOG_COORDINATE_ARRAY_POINTER 0x8456 +#define GL_FOG_COORDINATE_ARRAY 0x8457 +#define GL_COLOR_SUM 0x8458 +#define GL_CURRENT_SECONDARY_COLOR 0x8459 +#define GL_SECONDARY_COLOR_ARRAY_SIZE 0x845A +#define GL_SECONDARY_COLOR_ARRAY_TYPE 0x845B +#define GL_SECONDARY_COLOR_ARRAY_STRIDE 0x845C +#define GL_SECONDARY_COLOR_ARRAY_POINTER 0x845D +#define GL_SECONDARY_COLOR_ARRAY 0x845E +#define GL_TEXTURE_FILTER_CONTROL 0x8500 +#define GL_DEPTH_TEXTURE_MODE 0x884B +#define GL_COMPARE_R_TO_TEXTURE 0x884E +#endif + +#ifndef GL_VERSION_1_5 +#define GL_BUFFER_SIZE 0x8764 +#define GL_BUFFER_USAGE 0x8765 +#define GL_QUERY_COUNTER_BITS 0x8864 +#define GL_CURRENT_QUERY 0x8865 +#define GL_QUERY_RESULT 0x8866 +#define GL_QUERY_RESULT_AVAILABLE 0x8867 +#define GL_ARRAY_BUFFER 0x8892 +#define GL_ELEMENT_ARRAY_BUFFER 0x8893 +#define GL_ARRAY_BUFFER_BINDING 0x8894 +#define GL_ELEMENT_ARRAY_BUFFER_BINDING 0x8895 +#define GL_VERTEX_ATTRIB_ARRAY_BUFFER_BINDING 0x889F +#define GL_READ_ONLY 0x88B8 +#define GL_WRITE_ONLY 0x88B9 +#define GL_READ_WRITE 0x88BA +#define GL_BUFFER_ACCESS 0x88BB +#define GL_BUFFER_MAPPED 0x88BC +#define GL_BUFFER_MAP_POINTER 0x88BD +#define GL_STREAM_DRAW 0x88E0 +#define GL_STREAM_READ 0x88E1 +#define GL_STREAM_COPY 0x88E2 +#define GL_STATIC_DRAW 0x88E4 +#define GL_STATIC_READ 0x88E5 +#define GL_STATIC_COPY 0x88E6 +#define GL_DYNAMIC_DRAW 0x88E8 +#define GL_DYNAMIC_READ 0x88E9 +#define GL_DYNAMIC_COPY 0x88EA +#define GL_SAMPLES_PASSED 0x8914 +#endif + +#ifndef GL_VERSION_1_5_DEPRECATED +#define GL_VERTEX_ARRAY_BUFFER_BINDING 0x8896 +#define GL_NORMAL_ARRAY_BUFFER_BINDING 0x8897 +#define GL_COLOR_ARRAY_BUFFER_BINDING 0x8898 +#define GL_INDEX_ARRAY_BUFFER_BINDING 0x8899 +#define GL_TEXTURE_COORD_ARRAY_BUFFER_BINDING 0x889A +#define GL_EDGE_FLAG_ARRAY_BUFFER_BINDING 0x889B +#define GL_SECONDARY_COLOR_ARRAY_BUFFER_BINDING 0x889C +#define GL_FOG_COORDINATE_ARRAY_BUFFER_BINDING 0x889D +#define GL_WEIGHT_ARRAY_BUFFER_BINDING 0x889E +#define GL_FOG_COORD_SRC 0x8450 +#define GL_FOG_COORD 0x8451 +#define GL_CURRENT_FOG_COORD 0x8453 +#define GL_FOG_COORD_ARRAY_TYPE 0x8454 +#define GL_FOG_COORD_ARRAY_STRIDE 0x8455 +#define GL_FOG_COORD_ARRAY_POINTER 0x8456 +#define GL_FOG_COORD_ARRAY 0x8457 +#define GL_FOG_COORD_ARRAY_BUFFER_BINDING 0x889D +#define GL_SRC0_RGB 0x8580 +#define GL_SRC1_RGB 0x8581 +#define GL_SRC2_RGB 0x8582 +#define GL_SRC0_ALPHA 0x8588 +#define GL_SRC1_ALPHA 0x8589 +#define GL_SRC2_ALPHA 0x858A +#endif + +#ifndef GL_VERSION_2_0 +#define GL_BLEND_EQUATION_RGB 0x8009 +#define GL_VERTEX_ATTRIB_ARRAY_ENABLED 0x8622 +#define GL_VERTEX_ATTRIB_ARRAY_SIZE 0x8623 +#define GL_VERTEX_ATTRIB_ARRAY_STRIDE 0x8624 +#define GL_VERTEX_ATTRIB_ARRAY_TYPE 0x8625 +#define GL_CURRENT_VERTEX_ATTRIB 0x8626 +#define GL_VERTEX_PROGRAM_POINT_SIZE 0x8642 +#define GL_VERTEX_ATTRIB_ARRAY_POINTER 0x8645 +#define GL_STENCIL_BACK_FUNC 0x8800 +#define GL_STENCIL_BACK_FAIL 0x8801 +#define GL_STENCIL_BACK_PASS_DEPTH_FAIL 0x8802 +#define GL_STENCIL_BACK_PASS_DEPTH_PASS 0x8803 +#define GL_MAX_DRAW_BUFFERS 0x8824 +#define GL_DRAW_BUFFER0 0x8825 +#define GL_DRAW_BUFFER1 0x8826 +#define GL_DRAW_BUFFER2 0x8827 +#define GL_DRAW_BUFFER3 0x8828 +#define GL_DRAW_BUFFER4 0x8829 +#define GL_DRAW_BUFFER5 0x882A +#define GL_DRAW_BUFFER6 0x882B +#define GL_DRAW_BUFFER7 0x882C +#define GL_DRAW_BUFFER8 0x882D +#define GL_DRAW_BUFFER9 0x882E +#define GL_DRAW_BUFFER10 0x882F +#define GL_DRAW_BUFFER11 0x8830 +#define GL_DRAW_BUFFER12 0x8831 +#define GL_DRAW_BUFFER13 0x8832 +#define GL_DRAW_BUFFER14 0x8833 +#define GL_DRAW_BUFFER15 0x8834 +#define GL_BLEND_EQUATION_ALPHA 0x883D +#define GL_MAX_VERTEX_ATTRIBS 0x8869 +#define GL_VERTEX_ATTRIB_ARRAY_NORMALIZED 0x886A +#define GL_MAX_TEXTURE_IMAGE_UNITS 0x8872 +#define GL_FRAGMENT_SHADER 0x8B30 +#define GL_VERTEX_SHADER 0x8B31 +#define GL_MAX_FRAGMENT_UNIFORM_COMPONENTS 0x8B49 +#define GL_MAX_VERTEX_UNIFORM_COMPONENTS 0x8B4A +#define GL_MAX_VARYING_FLOATS 0x8B4B +#define GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS 0x8B4C +#define GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS 0x8B4D +#define GL_SHADER_TYPE 0x8B4F +#define GL_FLOAT_VEC2 0x8B50 +#define GL_FLOAT_VEC3 0x8B51 +#define GL_FLOAT_VEC4 0x8B52 +#define GL_INT_VEC2 0x8B53 +#define GL_INT_VEC3 0x8B54 +#define GL_INT_VEC4 0x8B55 +#define GL_BOOL 0x8B56 +#define GL_BOOL_VEC2 0x8B57 +#define GL_BOOL_VEC3 0x8B58 +#define GL_BOOL_VEC4 0x8B59 +#define GL_FLOAT_MAT2 0x8B5A +#define GL_FLOAT_MAT3 0x8B5B +#define GL_FLOAT_MAT4 0x8B5C +#define GL_SAMPLER_1D 0x8B5D +#define GL_SAMPLER_2D 0x8B5E +#define GL_SAMPLER_3D 0x8B5F +#define GL_SAMPLER_CUBE 0x8B60 +#define GL_SAMPLER_1D_SHADOW 0x8B61 +#define GL_SAMPLER_2D_SHADOW 0x8B62 +#define GL_DELETE_STATUS 0x8B80 +#define GL_COMPILE_STATUS 0x8B81 +#define GL_LINK_STATUS 0x8B82 +#define GL_VALIDATE_STATUS 0x8B83 +#define GL_INFO_LOG_LENGTH 0x8B84 +#define GL_ATTACHED_SHADERS 0x8B85 +#define GL_ACTIVE_UNIFORMS 0x8B86 +#define GL_ACTIVE_UNIFORM_MAX_LENGTH 0x8B87 +#define GL_SHADER_SOURCE_LENGTH 0x8B88 +#define GL_ACTIVE_ATTRIBUTES 0x8B89 +#define GL_ACTIVE_ATTRIBUTE_MAX_LENGTH 0x8B8A +#define GL_FRAGMENT_SHADER_DERIVATIVE_HINT 0x8B8B +#define GL_SHADING_LANGUAGE_VERSION 0x8B8C +#define GL_CURRENT_PROGRAM 0x8B8D +#define GL_POINT_SPRITE_COORD_ORIGIN 0x8CA0 +#define GL_LOWER_LEFT 0x8CA1 +#define GL_UPPER_LEFT 0x8CA2 +#define GL_STENCIL_BACK_REF 0x8CA3 +#define GL_STENCIL_BACK_VALUE_MASK 0x8CA4 +#define GL_STENCIL_BACK_WRITEMASK 0x8CA5 +#endif + +#ifndef GL_VERSION_2_0_DEPRECATED +#define GL_VERTEX_PROGRAM_TWO_SIDE 0x8643 +#define GL_POINT_SPRITE 0x8861 +#define GL_COORD_REPLACE 0x8862 +#define GL_MAX_TEXTURE_COORDS 0x8871 +#endif + +#ifndef GL_VERSION_2_1 +#define GL_PIXEL_PACK_BUFFER 0x88EB +#define GL_PIXEL_UNPACK_BUFFER 0x88EC +#define GL_PIXEL_PACK_BUFFER_BINDING 0x88ED +#define GL_PIXEL_UNPACK_BUFFER_BINDING 0x88EF +#define GL_FLOAT_MAT2x3 0x8B65 +#define GL_FLOAT_MAT2x4 0x8B66 +#define GL_FLOAT_MAT3x2 0x8B67 +#define GL_FLOAT_MAT3x4 0x8B68 +#define GL_FLOAT_MAT4x2 0x8B69 +#define GL_FLOAT_MAT4x3 0x8B6A +#define GL_SRGB 0x8C40 +#define GL_SRGB8 0x8C41 +#define GL_SRGB_ALPHA 0x8C42 +#define GL_SRGB8_ALPHA8 0x8C43 +#define GL_COMPRESSED_SRGB 0x8C48 +#define GL_COMPRESSED_SRGB_ALPHA 0x8C49 +#endif + +#ifndef GL_VERSION_2_1_DEPRECATED +#define GL_CURRENT_RASTER_SECONDARY_COLOR 0x845F +#define GL_SLUMINANCE_ALPHA 0x8C44 +#define GL_SLUMINANCE8_ALPHA8 0x8C45 +#define GL_SLUMINANCE 0x8C46 +#define GL_SLUMINANCE8 0x8C47 +#define GL_COMPRESSED_SLUMINANCE 0x8C4A +#define GL_COMPRESSED_SLUMINANCE_ALPHA 0x8C4B +#endif + +#ifndef GL_VERSION_3_0 +#define GL_COMPARE_REF_TO_TEXTURE 0x884E +#define GL_CLIP_DISTANCE0 0x3000 +#define GL_CLIP_DISTANCE1 0x3001 +#define GL_CLIP_DISTANCE2 0x3002 +#define GL_CLIP_DISTANCE3 0x3003 +#define GL_CLIP_DISTANCE4 0x3004 +#define GL_CLIP_DISTANCE5 0x3005 +#define GL_CLIP_DISTANCE6 0x3006 +#define GL_CLIP_DISTANCE7 0x3007 +#define GL_MAX_CLIP_DISTANCES 0x0D32 +#define GL_MAJOR_VERSION 0x821B +#define GL_MINOR_VERSION 0x821C +#define GL_NUM_EXTENSIONS 0x821D +#define GL_CONTEXT_FLAGS 0x821E +#define GL_DEPTH_BUFFER 0x8223 +#define GL_STENCIL_BUFFER 0x8224 +#define GL_COMPRESSED_RED 0x8225 +#define GL_COMPRESSED_RG 0x8226 +#define GL_CONTEXT_FLAG_FORWARD_COMPATIBLE_BIT 0x0001 +#define GL_RGBA32F 0x8814 +#define GL_RGB32F 0x8815 +#define GL_RGBA16F 0x881A +#define GL_RGB16F 0x881B +#define GL_VERTEX_ATTRIB_ARRAY_INTEGER 0x88FD +#define GL_MAX_ARRAY_TEXTURE_LAYERS 0x88FF +#define GL_MIN_PROGRAM_TEXEL_OFFSET 0x8904 +#define GL_MAX_PROGRAM_TEXEL_OFFSET 0x8905 +#define GL_CLAMP_READ_COLOR 0x891C +#define GL_FIXED_ONLY 0x891D +#define GL_MAX_VARYING_COMPONENTS 0x8B4B +#define GL_TEXTURE_1D_ARRAY 0x8C18 +#define GL_PROXY_TEXTURE_1D_ARRAY 0x8C19 +#define GL_TEXTURE_2D_ARRAY 0x8C1A +#define GL_PROXY_TEXTURE_2D_ARRAY 0x8C1B +#define GL_TEXTURE_BINDING_1D_ARRAY 0x8C1C +#define GL_TEXTURE_BINDING_2D_ARRAY 0x8C1D +#define GL_R11F_G11F_B10F 0x8C3A +#define GL_UNSIGNED_INT_10F_11F_11F_REV 0x8C3B +#define GL_RGB9_E5 0x8C3D +#define GL_UNSIGNED_INT_5_9_9_9_REV 0x8C3E +#define GL_TEXTURE_SHARED_SIZE 0x8C3F +#define GL_TRANSFORM_FEEDBACK_VARYING_MAX_LENGTH 0x8C76 +#define GL_TRANSFORM_FEEDBACK_BUFFER_MODE 0x8C7F +#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS 0x8C80 +#define GL_TRANSFORM_FEEDBACK_VARYINGS 0x8C83 +#define GL_TRANSFORM_FEEDBACK_BUFFER_START 0x8C84 +#define GL_TRANSFORM_FEEDBACK_BUFFER_SIZE 0x8C85 +#define GL_PRIMITIVES_GENERATED 0x8C87 +#define GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN 0x8C88 +#define GL_RASTERIZER_DISCARD 0x8C89 +#define GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS 0x8C8A +#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS 0x8C8B +#define GL_INTERLEAVED_ATTRIBS 0x8C8C +#define GL_SEPARATE_ATTRIBS 0x8C8D +#define GL_TRANSFORM_FEEDBACK_BUFFER 0x8C8E +#define GL_TRANSFORM_FEEDBACK_BUFFER_BINDING 0x8C8F +#define GL_RGBA32UI 0x8D70 +#define GL_RGB32UI 0x8D71 +#define GL_RGBA16UI 0x8D76 +#define GL_RGB16UI 0x8D77 +#define GL_RGBA8UI 0x8D7C +#define GL_RGB8UI 0x8D7D +#define GL_RGBA32I 0x8D82 +#define GL_RGB32I 0x8D83 +#define GL_RGBA16I 0x8D88 +#define GL_RGB16I 0x8D89 +#define GL_RGBA8I 0x8D8E +#define GL_RGB8I 0x8D8F +#define GL_RED_INTEGER 0x8D94 +#define GL_GREEN_INTEGER 0x8D95 +#define GL_BLUE_INTEGER 0x8D96 +#define GL_RGB_INTEGER 0x8D98 +#define GL_RGBA_INTEGER 0x8D99 +#define GL_BGR_INTEGER 0x8D9A +#define GL_BGRA_INTEGER 0x8D9B +#define GL_SAMPLER_1D_ARRAY 0x8DC0 +#define GL_SAMPLER_2D_ARRAY 0x8DC1 +#define GL_SAMPLER_1D_ARRAY_SHADOW 0x8DC3 +#define GL_SAMPLER_2D_ARRAY_SHADOW 0x8DC4 +#define GL_SAMPLER_CUBE_SHADOW 0x8DC5 +#define GL_UNSIGNED_INT_VEC2 0x8DC6 +#define GL_UNSIGNED_INT_VEC3 0x8DC7 +#define GL_UNSIGNED_INT_VEC4 0x8DC8 +#define GL_INT_SAMPLER_1D 0x8DC9 +#define GL_INT_SAMPLER_2D 0x8DCA +#define GL_INT_SAMPLER_3D 0x8DCB +#define GL_INT_SAMPLER_CUBE 0x8DCC +#define GL_INT_SAMPLER_1D_ARRAY 0x8DCE +#define GL_INT_SAMPLER_2D_ARRAY 0x8DCF +#define GL_UNSIGNED_INT_SAMPLER_1D 0x8DD1 +#define GL_UNSIGNED_INT_SAMPLER_2D 0x8DD2 +#define GL_UNSIGNED_INT_SAMPLER_3D 0x8DD3 +#define GL_UNSIGNED_INT_SAMPLER_CUBE 0x8DD4 +#define GL_UNSIGNED_INT_SAMPLER_1D_ARRAY 0x8DD6 +#define GL_UNSIGNED_INT_SAMPLER_2D_ARRAY 0x8DD7 +#define GL_QUERY_WAIT 0x8E13 +#define GL_QUERY_NO_WAIT 0x8E14 +#define GL_QUERY_BY_REGION_WAIT 0x8E15 +#define GL_QUERY_BY_REGION_NO_WAIT 0x8E16 +#define GL_BUFFER_ACCESS_FLAGS 0x911F +#define GL_BUFFER_MAP_LENGTH 0x9120 +#define GL_BUFFER_MAP_OFFSET 0x9121 +/* Reuse tokens from ARB_depth_buffer_float */ +/* reuse GL_DEPTH_COMPONENT32F */ +/* reuse GL_DEPTH32F_STENCIL8 */ +/* reuse GL_FLOAT_32_UNSIGNED_INT_24_8_REV */ +/* Reuse tokens from ARB_framebuffer_object */ +/* reuse GL_INVALID_FRAMEBUFFER_OPERATION */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_COLOR_ENCODING */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_COMPONENT_TYPE */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_RED_SIZE */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_GREEN_SIZE */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_BLUE_SIZE */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_ALPHA_SIZE */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_DEPTH_SIZE */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_STENCIL_SIZE */ +/* reuse GL_FRAMEBUFFER_DEFAULT */ +/* reuse GL_FRAMEBUFFER_UNDEFINED */ +/* reuse GL_DEPTH_STENCIL_ATTACHMENT */ +/* reuse GL_INDEX */ +/* reuse GL_MAX_RENDERBUFFER_SIZE */ +/* reuse GL_DEPTH_STENCIL */ +/* reuse GL_UNSIGNED_INT_24_8 */ +/* reuse GL_DEPTH24_STENCIL8 */ +/* reuse GL_TEXTURE_STENCIL_SIZE */ +/* reuse GL_TEXTURE_RED_TYPE */ +/* reuse GL_TEXTURE_GREEN_TYPE */ +/* reuse GL_TEXTURE_BLUE_TYPE */ +/* reuse GL_TEXTURE_ALPHA_TYPE */ +/* reuse GL_TEXTURE_DEPTH_TYPE */ +/* reuse GL_UNSIGNED_NORMALIZED */ +/* reuse GL_FRAMEBUFFER_BINDING */ +/* reuse GL_DRAW_FRAMEBUFFER_BINDING */ +/* reuse GL_RENDERBUFFER_BINDING */ +/* reuse GL_READ_FRAMEBUFFER */ +/* reuse GL_DRAW_FRAMEBUFFER */ +/* reuse GL_READ_FRAMEBUFFER_BINDING */ +/* reuse GL_RENDERBUFFER_SAMPLES */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_OBJECT_NAME */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LEVEL */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_CUBE_MAP_FACE */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER */ +/* reuse GL_FRAMEBUFFER_COMPLETE */ +/* reuse GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT */ +/* reuse GL_FRAMEBUFFER_INCOMPLETE_MISSING_ATTACHMENT */ +/* reuse GL_FRAMEBUFFER_INCOMPLETE_DRAW_BUFFER */ +/* reuse GL_FRAMEBUFFER_INCOMPLETE_READ_BUFFER */ +/* reuse GL_FRAMEBUFFER_UNSUPPORTED */ +/* reuse GL_MAX_COLOR_ATTACHMENTS */ +/* reuse GL_COLOR_ATTACHMENT0 */ +/* reuse GL_COLOR_ATTACHMENT1 */ +/* reuse GL_COLOR_ATTACHMENT2 */ +/* reuse GL_COLOR_ATTACHMENT3 */ +/* reuse GL_COLOR_ATTACHMENT4 */ +/* reuse GL_COLOR_ATTACHMENT5 */ +/* reuse GL_COLOR_ATTACHMENT6 */ +/* reuse GL_COLOR_ATTACHMENT7 */ +/* reuse GL_COLOR_ATTACHMENT8 */ +/* reuse GL_COLOR_ATTACHMENT9 */ +/* reuse GL_COLOR_ATTACHMENT10 */ +/* reuse GL_COLOR_ATTACHMENT11 */ +/* reuse GL_COLOR_ATTACHMENT12 */ +/* reuse GL_COLOR_ATTACHMENT13 */ +/* reuse GL_COLOR_ATTACHMENT14 */ +/* reuse GL_COLOR_ATTACHMENT15 */ +/* reuse GL_DEPTH_ATTACHMENT */ +/* reuse GL_STENCIL_ATTACHMENT */ +/* reuse GL_FRAMEBUFFER */ +/* reuse GL_RENDERBUFFER */ +/* reuse GL_RENDERBUFFER_WIDTH */ +/* reuse GL_RENDERBUFFER_HEIGHT */ +/* reuse GL_RENDERBUFFER_INTERNAL_FORMAT */ +/* reuse GL_STENCIL_INDEX1 */ +/* reuse GL_STENCIL_INDEX4 */ +/* reuse GL_STENCIL_INDEX8 */ +/* reuse GL_STENCIL_INDEX16 */ +/* reuse GL_RENDERBUFFER_RED_SIZE */ +/* reuse GL_RENDERBUFFER_GREEN_SIZE */ +/* reuse GL_RENDERBUFFER_BLUE_SIZE */ +/* reuse GL_RENDERBUFFER_ALPHA_SIZE */ +/* reuse GL_RENDERBUFFER_DEPTH_SIZE */ +/* reuse GL_RENDERBUFFER_STENCIL_SIZE */ +/* reuse GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE */ +/* reuse GL_MAX_SAMPLES */ +/* Reuse tokens from ARB_framebuffer_sRGB */ +/* reuse GL_FRAMEBUFFER_SRGB */ +/* Reuse tokens from ARB_half_float_vertex */ +/* reuse GL_HALF_FLOAT */ +/* Reuse tokens from ARB_map_buffer_range */ +/* reuse GL_MAP_READ_BIT */ +/* reuse GL_MAP_WRITE_BIT */ +/* reuse GL_MAP_INVALIDATE_RANGE_BIT */ +/* reuse GL_MAP_INVALIDATE_BUFFER_BIT */ +/* reuse GL_MAP_FLUSH_EXPLICIT_BIT */ +/* reuse GL_MAP_UNSYNCHRONIZED_BIT */ +/* Reuse tokens from ARB_texture_compression_rgtc */ +/* reuse GL_COMPRESSED_RED_RGTC1 */ +/* reuse GL_COMPRESSED_SIGNED_RED_RGTC1 */ +/* reuse GL_COMPRESSED_RG_RGTC2 */ +/* reuse GL_COMPRESSED_SIGNED_RG_RGTC2 */ +/* Reuse tokens from ARB_texture_rg */ +/* reuse GL_RG */ +/* reuse GL_RG_INTEGER */ +/* reuse GL_R8 */ +/* reuse GL_R16 */ +/* reuse GL_RG8 */ +/* reuse GL_RG16 */ +/* reuse GL_R16F */ +/* reuse GL_R32F */ +/* reuse GL_RG16F */ +/* reuse GL_RG32F */ +/* reuse GL_R8I */ +/* reuse GL_R8UI */ +/* reuse GL_R16I */ +/* reuse GL_R16UI */ +/* reuse GL_R32I */ +/* reuse GL_R32UI */ +/* reuse GL_RG8I */ +/* reuse GL_RG8UI */ +/* reuse GL_RG16I */ +/* reuse GL_RG16UI */ +/* reuse GL_RG32I */ +/* reuse GL_RG32UI */ +/* Reuse tokens from ARB_vertex_array_object */ +/* reuse GL_VERTEX_ARRAY_BINDING */ +#endif + +#ifndef GL_VERSION_3_0_DEPRECATED +#define GL_CLAMP_VERTEX_COLOR 0x891A +#define GL_CLAMP_FRAGMENT_COLOR 0x891B +#define GL_ALPHA_INTEGER 0x8D97 +/* Reuse tokens from ARB_framebuffer_object */ +/* reuse GL_TEXTURE_LUMINANCE_TYPE */ +/* reuse GL_TEXTURE_INTENSITY_TYPE */ +#endif + +#ifndef GL_VERSION_3_1 +#define GL_SAMPLER_2D_RECT 0x8B63 +#define GL_SAMPLER_2D_RECT_SHADOW 0x8B64 +#define GL_SAMPLER_BUFFER 0x8DC2 +#define GL_INT_SAMPLER_2D_RECT 0x8DCD +#define GL_INT_SAMPLER_BUFFER 0x8DD0 +#define GL_UNSIGNED_INT_SAMPLER_2D_RECT 0x8DD5 +#define GL_UNSIGNED_INT_SAMPLER_BUFFER 0x8DD8 +#define GL_TEXTURE_BUFFER 0x8C2A +#define GL_MAX_TEXTURE_BUFFER_SIZE 0x8C2B +#define GL_TEXTURE_BINDING_BUFFER 0x8C2C +#define GL_TEXTURE_BUFFER_DATA_STORE_BINDING 0x8C2D +#define GL_TEXTURE_BUFFER_FORMAT 0x8C2E +#define GL_TEXTURE_RECTANGLE 0x84F5 +#define GL_TEXTURE_BINDING_RECTANGLE 0x84F6 +#define GL_PROXY_TEXTURE_RECTANGLE 0x84F7 +#define GL_MAX_RECTANGLE_TEXTURE_SIZE 0x84F8 +#define GL_RED_SNORM 0x8F90 +#define GL_RG_SNORM 0x8F91 +#define GL_RGB_SNORM 0x8F92 +#define GL_RGBA_SNORM 0x8F93 +#define GL_R8_SNORM 0x8F94 +#define GL_RG8_SNORM 0x8F95 +#define GL_RGB8_SNORM 0x8F96 +#define GL_RGBA8_SNORM 0x8F97 +#define GL_R16_SNORM 0x8F98 +#define GL_RG16_SNORM 0x8F99 +#define GL_RGB16_SNORM 0x8F9A +#define GL_RGBA16_SNORM 0x8F9B +#define GL_SIGNED_NORMALIZED 0x8F9C +#define GL_PRIMITIVE_RESTART 0x8F9D +#define GL_PRIMITIVE_RESTART_INDEX 0x8F9E +/* Reuse tokens from ARB_copy_buffer */ +/* reuse GL_COPY_READ_BUFFER */ +/* reuse GL_COPY_WRITE_BUFFER */ +/* Reuse tokens from ARB_draw_instanced (none) */ +/* Reuse tokens from ARB_uniform_buffer_object */ +/* reuse GL_UNIFORM_BUFFER */ +/* reuse GL_UNIFORM_BUFFER_BINDING */ +/* reuse GL_UNIFORM_BUFFER_START */ +/* reuse GL_UNIFORM_BUFFER_SIZE */ +/* reuse GL_MAX_VERTEX_UNIFORM_BLOCKS */ +/* reuse GL_MAX_FRAGMENT_UNIFORM_BLOCKS */ +/* reuse GL_MAX_COMBINED_UNIFORM_BLOCKS */ +/* reuse GL_MAX_UNIFORM_BUFFER_BINDINGS */ +/* reuse GL_MAX_UNIFORM_BLOCK_SIZE */ +/* reuse GL_MAX_COMBINED_VERTEX_UNIFORM_COMPONENTS */ +/* reuse GL_MAX_COMBINED_FRAGMENT_UNIFORM_COMPONENTS */ +/* reuse GL_UNIFORM_BUFFER_OFFSET_ALIGNMENT */ +/* reuse GL_ACTIVE_UNIFORM_BLOCK_MAX_NAME_LENGTH */ +/* reuse GL_ACTIVE_UNIFORM_BLOCKS */ +/* reuse GL_UNIFORM_TYPE */ +/* reuse GL_UNIFORM_SIZE */ +/* reuse GL_UNIFORM_NAME_LENGTH */ +/* reuse GL_UNIFORM_BLOCK_INDEX */ +/* reuse GL_UNIFORM_OFFSET */ +/* reuse GL_UNIFORM_ARRAY_STRIDE */ +/* reuse GL_UNIFORM_MATRIX_STRIDE */ +/* reuse GL_UNIFORM_IS_ROW_MAJOR */ +/* reuse GL_UNIFORM_BLOCK_BINDING */ +/* reuse GL_UNIFORM_BLOCK_DATA_SIZE */ +/* reuse GL_UNIFORM_BLOCK_NAME_LENGTH */ +/* reuse GL_UNIFORM_BLOCK_ACTIVE_UNIFORMS */ +/* reuse GL_UNIFORM_BLOCK_ACTIVE_UNIFORM_INDICES */ +/* reuse GL_UNIFORM_BLOCK_REFERENCED_BY_VERTEX_SHADER */ +/* reuse GL_UNIFORM_BLOCK_REFERENCED_BY_FRAGMENT_SHADER */ +/* reuse GL_INVALID_INDEX */ +#endif + +#ifndef GL_VERSION_3_2 +#define GL_CONTEXT_CORE_PROFILE_BIT 0x00000001 +#define GL_CONTEXT_COMPATIBILITY_PROFILE_BIT 0x00000002 +#define GL_LINES_ADJACENCY 0x000A +#define GL_LINE_STRIP_ADJACENCY 0x000B +#define GL_TRIANGLES_ADJACENCY 0x000C +#define GL_TRIANGLE_STRIP_ADJACENCY 0x000D +#define GL_PROGRAM_POINT_SIZE 0x8642 +#define GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS 0x8C29 +#define GL_FRAMEBUFFER_ATTACHMENT_LAYERED 0x8DA7 +#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS 0x8DA8 +#define GL_GEOMETRY_SHADER 0x8DD9 +#define GL_GEOMETRY_VERTICES_OUT 0x8916 +#define GL_GEOMETRY_INPUT_TYPE 0x8917 +#define GL_GEOMETRY_OUTPUT_TYPE 0x8918 +#define GL_MAX_GEOMETRY_UNIFORM_COMPONENTS 0x8DDF +#define GL_MAX_GEOMETRY_OUTPUT_VERTICES 0x8DE0 +#define GL_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS 0x8DE1 +#define GL_MAX_VERTEX_OUTPUT_COMPONENTS 0x9122 +#define GL_MAX_GEOMETRY_INPUT_COMPONENTS 0x9123 +#define GL_MAX_GEOMETRY_OUTPUT_COMPONENTS 0x9124 +#define GL_MAX_FRAGMENT_INPUT_COMPONENTS 0x9125 +#define GL_CONTEXT_PROFILE_MASK 0x9126 +/* reuse GL_MAX_VARYING_COMPONENTS */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER */ +/* Reuse tokens from ARB_depth_clamp */ +/* reuse GL_DEPTH_CLAMP */ +/* Reuse tokens from ARB_draw_elements_base_vertex (none) */ +/* Reuse tokens from ARB_fragment_coord_conventions (none) */ +/* Reuse tokens from ARB_provoking_vertex */ +/* reuse GL_QUADS_FOLLOW_PROVOKING_VERTEX_CONVENTION */ +/* reuse GL_FIRST_VERTEX_CONVENTION */ +/* reuse GL_LAST_VERTEX_CONVENTION */ +/* reuse GL_PROVOKING_VERTEX */ +/* Reuse tokens from ARB_seamless_cube_map */ +/* reuse GL_TEXTURE_CUBE_MAP_SEAMLESS */ +/* Reuse tokens from ARB_sync */ +/* reuse GL_MAX_SERVER_WAIT_TIMEOUT */ +/* reuse GL_OBJECT_TYPE */ +/* reuse GL_SYNC_CONDITION */ +/* reuse GL_SYNC_STATUS */ +/* reuse GL_SYNC_FLAGS */ +/* reuse GL_SYNC_FENCE */ +/* reuse GL_SYNC_GPU_COMMANDS_COMPLETE */ +/* reuse GL_UNSIGNALED */ +/* reuse GL_SIGNALED */ +/* reuse GL_ALREADY_SIGNALED */ +/* reuse GL_TIMEOUT_EXPIRED */ +/* reuse GL_CONDITION_SATISFIED */ +/* reuse GL_WAIT_FAILED */ +/* reuse GL_TIMEOUT_IGNORED */ +/* reuse GL_SYNC_FLUSH_COMMANDS_BIT */ +/* reuse GL_TIMEOUT_IGNORED */ +/* Reuse tokens from ARB_texture_multisample */ +/* reuse GL_SAMPLE_POSITION */ +/* reuse GL_SAMPLE_MASK */ +/* reuse GL_SAMPLE_MASK_VALUE */ +/* reuse GL_MAX_SAMPLE_MASK_WORDS */ +/* reuse GL_TEXTURE_2D_MULTISAMPLE */ +/* reuse GL_PROXY_TEXTURE_2D_MULTISAMPLE */ +/* reuse GL_TEXTURE_2D_MULTISAMPLE_ARRAY */ +/* reuse GL_PROXY_TEXTURE_2D_MULTISAMPLE_ARRAY */ +/* reuse GL_TEXTURE_BINDING_2D_MULTISAMPLE */ +/* reuse GL_TEXTURE_BINDING_2D_MULTISAMPLE_ARRAY */ +/* reuse GL_TEXTURE_SAMPLES */ +/* reuse GL_TEXTURE_FIXED_SAMPLE_LOCATIONS */ +/* reuse GL_SAMPLER_2D_MULTISAMPLE */ +/* reuse GL_INT_SAMPLER_2D_MULTISAMPLE */ +/* reuse GL_UNSIGNED_INT_SAMPLER_2D_MULTISAMPLE */ +/* reuse GL_SAMPLER_2D_MULTISAMPLE_ARRAY */ +/* reuse GL_INT_SAMPLER_2D_MULTISAMPLE_ARRAY */ +/* reuse GL_UNSIGNED_INT_SAMPLER_2D_MULTISAMPLE_ARRAY */ +/* reuse GL_MAX_COLOR_TEXTURE_SAMPLES */ +/* reuse GL_MAX_DEPTH_TEXTURE_SAMPLES */ +/* reuse GL_MAX_INTEGER_SAMPLES */ +/* Don't need to reuse tokens from ARB_vertex_array_bgra since they're already in 1.2 core */ +#endif + +#ifndef GL_VERSION_3_3 +#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR 0x88FE +/* Reuse tokens from ARB_blend_func_extended */ +/* reuse GL_SRC1_COLOR */ +/* reuse GL_ONE_MINUS_SRC1_COLOR */ +/* reuse GL_ONE_MINUS_SRC1_ALPHA */ +/* reuse GL_MAX_DUAL_SOURCE_DRAW_BUFFERS */ +/* Reuse tokens from ARB_explicit_attrib_location (none) */ +/* Reuse tokens from ARB_occlusion_query2 */ +/* reuse GL_ANY_SAMPLES_PASSED */ +/* Reuse tokens from ARB_sampler_objects */ +/* reuse GL_SAMPLER_BINDING */ +/* Reuse tokens from ARB_shader_bit_encoding (none) */ +/* Reuse tokens from ARB_texture_rgb10_a2ui */ +/* reuse GL_RGB10_A2UI */ +/* Reuse tokens from ARB_texture_swizzle */ +/* reuse GL_TEXTURE_SWIZZLE_R */ +/* reuse GL_TEXTURE_SWIZZLE_G */ +/* reuse GL_TEXTURE_SWIZZLE_B */ +/* reuse GL_TEXTURE_SWIZZLE_A */ +/* reuse GL_TEXTURE_SWIZZLE_RGBA */ +/* Reuse tokens from ARB_timer_query */ +/* reuse GL_TIME_ELAPSED */ +/* reuse GL_TIMESTAMP */ +/* Reuse tokens from ARB_vertex_type_2_10_10_10_rev */ +/* reuse GL_INT_2_10_10_10_REV */ +#endif + +#ifndef GL_VERSION_4_0 +#define GL_SAMPLE_SHADING 0x8C36 +#define GL_MIN_SAMPLE_SHADING_VALUE 0x8C37 +#define GL_MIN_PROGRAM_TEXTURE_GATHER_OFFSET 0x8E5E +#define GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET 0x8E5F +#define GL_TEXTURE_CUBE_MAP_ARRAY 0x9009 +#define GL_TEXTURE_BINDING_CUBE_MAP_ARRAY 0x900A +#define GL_PROXY_TEXTURE_CUBE_MAP_ARRAY 0x900B +#define GL_SAMPLER_CUBE_MAP_ARRAY 0x900C +#define GL_SAMPLER_CUBE_MAP_ARRAY_SHADOW 0x900D +#define GL_INT_SAMPLER_CUBE_MAP_ARRAY 0x900E +#define GL_UNSIGNED_INT_SAMPLER_CUBE_MAP_ARRAY 0x900F +/* Reuse tokens from ARB_texture_query_lod (none) */ +/* Reuse tokens from ARB_draw_buffers_blend (none) */ +/* Reuse tokens from ARB_draw_indirect */ +/* reuse GL_DRAW_INDIRECT_BUFFER */ +/* reuse GL_DRAW_INDIRECT_BUFFER_BINDING */ +/* Reuse tokens from ARB_gpu_shader5 */ +/* reuse GL_GEOMETRY_SHADER_INVOCATIONS */ +/* reuse GL_MAX_GEOMETRY_SHADER_INVOCATIONS */ +/* reuse GL_MIN_FRAGMENT_INTERPOLATION_OFFSET */ +/* reuse GL_MAX_FRAGMENT_INTERPOLATION_OFFSET */ +/* reuse GL_FRAGMENT_INTERPOLATION_OFFSET_BITS */ +/* reuse GL_MAX_VERTEX_STREAMS */ +/* Reuse tokens from ARB_gpu_shader_fp64 */ +/* reuse GL_DOUBLE_VEC2 */ +/* reuse GL_DOUBLE_VEC3 */ +/* reuse GL_DOUBLE_VEC4 */ +/* reuse GL_DOUBLE_MAT2 */ +/* reuse GL_DOUBLE_MAT3 */ +/* reuse GL_DOUBLE_MAT4 */ +/* reuse GL_DOUBLE_MAT2x3 */ +/* reuse GL_DOUBLE_MAT2x4 */ +/* reuse GL_DOUBLE_MAT3x2 */ +/* reuse GL_DOUBLE_MAT3x4 */ +/* reuse GL_DOUBLE_MAT4x2 */ +/* reuse GL_DOUBLE_MAT4x3 */ +/* Reuse tokens from ARB_shader_subroutine */ +/* reuse GL_ACTIVE_SUBROUTINES */ +/* reuse GL_ACTIVE_SUBROUTINE_UNIFORMS */ +/* reuse GL_ACTIVE_SUBROUTINE_UNIFORM_LOCATIONS */ +/* reuse GL_ACTIVE_SUBROUTINE_MAX_LENGTH */ +/* reuse GL_ACTIVE_SUBROUTINE_UNIFORM_MAX_LENGTH */ +/* reuse GL_MAX_SUBROUTINES */ +/* reuse GL_MAX_SUBROUTINE_UNIFORM_LOCATIONS */ +/* reuse GL_NUM_COMPATIBLE_SUBROUTINES */ +/* reuse GL_COMPATIBLE_SUBROUTINES */ +/* Reuse tokens from ARB_tessellation_shader */ +/* reuse GL_PATCHES */ +/* reuse GL_PATCH_VERTICES */ +/* reuse GL_PATCH_DEFAULT_INNER_LEVEL */ +/* reuse GL_PATCH_DEFAULT_OUTER_LEVEL */ +/* reuse GL_TESS_CONTROL_OUTPUT_VERTICES */ +/* reuse GL_TESS_GEN_MODE */ +/* reuse GL_TESS_GEN_SPACING */ +/* reuse GL_TESS_GEN_VERTEX_ORDER */ +/* reuse GL_TESS_GEN_POINT_MODE */ +/* reuse GL_ISOLINES */ +/* reuse GL_FRACTIONAL_ODD */ +/* reuse GL_FRACTIONAL_EVEN */ +/* reuse GL_MAX_PATCH_VERTICES */ +/* reuse GL_MAX_TESS_GEN_LEVEL */ +/* reuse GL_MAX_TESS_CONTROL_UNIFORM_COMPONENTS */ +/* reuse GL_MAX_TESS_EVALUATION_UNIFORM_COMPONENTS */ +/* reuse GL_MAX_TESS_CONTROL_TEXTURE_IMAGE_UNITS */ +/* reuse GL_MAX_TESS_EVALUATION_TEXTURE_IMAGE_UNITS */ +/* reuse GL_MAX_TESS_CONTROL_OUTPUT_COMPONENTS */ +/* reuse GL_MAX_TESS_PATCH_COMPONENTS */ +/* reuse GL_MAX_TESS_CONTROL_TOTAL_OUTPUT_COMPONENTS */ +/* reuse GL_MAX_TESS_EVALUATION_OUTPUT_COMPONENTS */ +/* reuse GL_MAX_TESS_CONTROL_UNIFORM_BLOCKS */ +/* reuse GL_MAX_TESS_EVALUATION_UNIFORM_BLOCKS */ +/* reuse GL_MAX_TESS_CONTROL_INPUT_COMPONENTS */ +/* reuse GL_MAX_TESS_EVALUATION_INPUT_COMPONENTS */ +/* reuse GL_MAX_COMBINED_TESS_CONTROL_UNIFORM_COMPONENTS */ +/* reuse GL_MAX_COMBINED_TESS_EVALUATION_UNIFORM_COMPONENTS */ +/* reuse GL_UNIFORM_BLOCK_REFERENCED_BY_TESS_CONTROL_SHADER */ +/* reuse GL_UNIFORM_BLOCK_REFERENCED_BY_TESS_EVALUATION_SHADER */ +/* reuse GL_TESS_EVALUATION_SHADER */ +/* reuse GL_TESS_CONTROL_SHADER */ +/* Reuse tokens from ARB_texture_buffer_object_rgb32 (none) */ +/* Reuse tokens from ARB_transform_feedback2 */ +/* reuse GL_TRANSFORM_FEEDBACK */ +/* reuse GL_TRANSFORM_FEEDBACK_BUFFER_PAUSED */ +/* reuse GL_TRANSFORM_FEEDBACK_BUFFER_ACTIVE */ +/* reuse GL_TRANSFORM_FEEDBACK_BINDING */ +/* Reuse tokens from ARB_transform_feedback3 */ +/* reuse GL_MAX_TRANSFORM_FEEDBACK_BUFFERS */ +/* reuse GL_MAX_VERTEX_STREAMS */ +#endif + +#ifndef GL_VERSION_4_1 +/* Reuse tokens from ARB_ES2_compatibility */ +/* reuse GL_FIXED */ +/* reuse GL_IMPLEMENTATION_COLOR_READ_TYPE */ +/* reuse GL_IMPLEMENTATION_COLOR_READ_FORMAT */ +/* reuse GL_LOW_FLOAT */ +/* reuse GL_MEDIUM_FLOAT */ +/* reuse GL_HIGH_FLOAT */ +/* reuse GL_LOW_INT */ +/* reuse GL_MEDIUM_INT */ +/* reuse GL_HIGH_INT */ +/* reuse GL_SHADER_COMPILER */ +/* reuse GL_NUM_SHADER_BINARY_FORMATS */ +/* reuse GL_MAX_VERTEX_UNIFORM_VECTORS */ +/* reuse GL_MAX_VARYING_VECTORS */ +/* reuse GL_MAX_FRAGMENT_UNIFORM_VECTORS */ +/* Reuse tokens from ARB_get_program_binary */ +/* reuse GL_PROGRAM_BINARY_RETRIEVABLE_HINT */ +/* reuse GL_PROGRAM_BINARY_LENGTH */ +/* reuse GL_NUM_PROGRAM_BINARY_FORMATS */ +/* reuse GL_PROGRAM_BINARY_FORMATS */ +/* Reuse tokens from ARB_separate_shader_objects */ +/* reuse GL_VERTEX_SHADER_BIT */ +/* reuse GL_FRAGMENT_SHADER_BIT */ +/* reuse GL_GEOMETRY_SHADER_BIT */ +/* reuse GL_TESS_CONTROL_SHADER_BIT */ +/* reuse GL_TESS_EVALUATION_SHADER_BIT */ +/* reuse GL_ALL_SHADER_BITS */ +/* reuse GL_PROGRAM_SEPARABLE */ +/* reuse GL_ACTIVE_PROGRAM */ +/* reuse GL_PROGRAM_PIPELINE_BINDING */ +/* Reuse tokens from ARB_shader_precision (none) */ +/* Reuse tokens from ARB_vertex_attrib_64bit - all are in GL 3.0 and 4.0 already */ +/* Reuse tokens from ARB_viewport_array - some are in GL 1.1 and ARB_provoking_vertex already */ +/* reuse GL_MAX_VIEWPORTS */ +/* reuse GL_VIEWPORT_SUBPIXEL_BITS */ +/* reuse GL_VIEWPORT_BOUNDS_RANGE */ +/* reuse GL_LAYER_PROVOKING_VERTEX */ +/* reuse GL_VIEWPORT_INDEX_PROVOKING_VERTEX */ +/* reuse GL_UNDEFINED_VERTEX */ +#endif + +#ifndef GL_ARB_multitexture +#define GL_TEXTURE0_ARB 0x84C0 +#define GL_TEXTURE1_ARB 0x84C1 +#define GL_TEXTURE2_ARB 0x84C2 +#define GL_TEXTURE3_ARB 0x84C3 +#define GL_TEXTURE4_ARB 0x84C4 +#define GL_TEXTURE5_ARB 0x84C5 +#define GL_TEXTURE6_ARB 0x84C6 +#define GL_TEXTURE7_ARB 0x84C7 +#define GL_TEXTURE8_ARB 0x84C8 +#define GL_TEXTURE9_ARB 0x84C9 +#define GL_TEXTURE10_ARB 0x84CA +#define GL_TEXTURE11_ARB 0x84CB +#define GL_TEXTURE12_ARB 0x84CC +#define GL_TEXTURE13_ARB 0x84CD +#define GL_TEXTURE14_ARB 0x84CE +#define GL_TEXTURE15_ARB 0x84CF +#define GL_TEXTURE16_ARB 0x84D0 +#define GL_TEXTURE17_ARB 0x84D1 +#define GL_TEXTURE18_ARB 0x84D2 +#define GL_TEXTURE19_ARB 0x84D3 +#define GL_TEXTURE20_ARB 0x84D4 +#define GL_TEXTURE21_ARB 0x84D5 +#define GL_TEXTURE22_ARB 0x84D6 +#define GL_TEXTURE23_ARB 0x84D7 +#define GL_TEXTURE24_ARB 0x84D8 +#define GL_TEXTURE25_ARB 0x84D9 +#define GL_TEXTURE26_ARB 0x84DA +#define GL_TEXTURE27_ARB 0x84DB +#define GL_TEXTURE28_ARB 0x84DC +#define GL_TEXTURE29_ARB 0x84DD +#define GL_TEXTURE30_ARB 0x84DE +#define GL_TEXTURE31_ARB 0x84DF +#define GL_ACTIVE_TEXTURE_ARB 0x84E0 +#define GL_CLIENT_ACTIVE_TEXTURE_ARB 0x84E1 +#define GL_MAX_TEXTURE_UNITS_ARB 0x84E2 +#endif + +#ifndef GL_ARB_transpose_matrix +#define GL_TRANSPOSE_MODELVIEW_MATRIX_ARB 0x84E3 +#define GL_TRANSPOSE_PROJECTION_MATRIX_ARB 0x84E4 +#define GL_TRANSPOSE_TEXTURE_MATRIX_ARB 0x84E5 +#define GL_TRANSPOSE_COLOR_MATRIX_ARB 0x84E6 +#endif + +#ifndef GL_ARB_multisample +#define GL_MULTISAMPLE_ARB 0x809D +#define GL_SAMPLE_ALPHA_TO_COVERAGE_ARB 0x809E +#define GL_SAMPLE_ALPHA_TO_ONE_ARB 0x809F +#define GL_SAMPLE_COVERAGE_ARB 0x80A0 +#define GL_SAMPLE_BUFFERS_ARB 0x80A8 +#define GL_SAMPLES_ARB 0x80A9 +#define GL_SAMPLE_COVERAGE_VALUE_ARB 0x80AA +#define GL_SAMPLE_COVERAGE_INVERT_ARB 0x80AB +#define GL_MULTISAMPLE_BIT_ARB 0x20000000 +#endif + +#ifndef GL_ARB_texture_env_add +#endif + +#ifndef GL_ARB_texture_cube_map +#define GL_NORMAL_MAP_ARB 0x8511 +#define GL_REFLECTION_MAP_ARB 0x8512 +#define GL_TEXTURE_CUBE_MAP_ARB 0x8513 +#define GL_TEXTURE_BINDING_CUBE_MAP_ARB 0x8514 +#define GL_TEXTURE_CUBE_MAP_POSITIVE_X_ARB 0x8515 +#define GL_TEXTURE_CUBE_MAP_NEGATIVE_X_ARB 0x8516 +#define GL_TEXTURE_CUBE_MAP_POSITIVE_Y_ARB 0x8517 +#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Y_ARB 0x8518 +#define GL_TEXTURE_CUBE_MAP_POSITIVE_Z_ARB 0x8519 +#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Z_ARB 0x851A +#define GL_PROXY_TEXTURE_CUBE_MAP_ARB 0x851B +#define GL_MAX_CUBE_MAP_TEXTURE_SIZE_ARB 0x851C +#endif + +#ifndef GL_ARB_texture_compression +#define GL_COMPRESSED_ALPHA_ARB 0x84E9 +#define GL_COMPRESSED_LUMINANCE_ARB 0x84EA +#define GL_COMPRESSED_LUMINANCE_ALPHA_ARB 0x84EB +#define GL_COMPRESSED_INTENSITY_ARB 0x84EC +#define GL_COMPRESSED_RGB_ARB 0x84ED +#define GL_COMPRESSED_RGBA_ARB 0x84EE +#define GL_TEXTURE_COMPRESSION_HINT_ARB 0x84EF +#define GL_TEXTURE_COMPRESSED_IMAGE_SIZE_ARB 0x86A0 +#define GL_TEXTURE_COMPRESSED_ARB 0x86A1 +#define GL_NUM_COMPRESSED_TEXTURE_FORMATS_ARB 0x86A2 +#define GL_COMPRESSED_TEXTURE_FORMATS_ARB 0x86A3 +#endif + +#ifndef GL_ARB_texture_border_clamp +#define GL_CLAMP_TO_BORDER_ARB 0x812D +#endif + +#ifndef GL_ARB_point_parameters +#define GL_POINT_SIZE_MIN_ARB 0x8126 +#define GL_POINT_SIZE_MAX_ARB 0x8127 +#define GL_POINT_FADE_THRESHOLD_SIZE_ARB 0x8128 +#define GL_POINT_DISTANCE_ATTENUATION_ARB 0x8129 +#endif + +#ifndef GL_ARB_vertex_blend +#define GL_MAX_VERTEX_UNITS_ARB 0x86A4 +#define GL_ACTIVE_VERTEX_UNITS_ARB 0x86A5 +#define GL_WEIGHT_SUM_UNITY_ARB 0x86A6 +#define GL_VERTEX_BLEND_ARB 0x86A7 +#define GL_CURRENT_WEIGHT_ARB 0x86A8 +#define GL_WEIGHT_ARRAY_TYPE_ARB 0x86A9 +#define GL_WEIGHT_ARRAY_STRIDE_ARB 0x86AA +#define GL_WEIGHT_ARRAY_SIZE_ARB 0x86AB +#define GL_WEIGHT_ARRAY_POINTER_ARB 0x86AC +#define GL_WEIGHT_ARRAY_ARB 0x86AD +#define GL_MODELVIEW0_ARB 0x1700 +#define GL_MODELVIEW1_ARB 0x850A +#define GL_MODELVIEW2_ARB 0x8722 +#define GL_MODELVIEW3_ARB 0x8723 +#define GL_MODELVIEW4_ARB 0x8724 +#define GL_MODELVIEW5_ARB 0x8725 +#define GL_MODELVIEW6_ARB 0x8726 +#define GL_MODELVIEW7_ARB 0x8727 +#define GL_MODELVIEW8_ARB 0x8728 +#define GL_MODELVIEW9_ARB 0x8729 +#define GL_MODELVIEW10_ARB 0x872A +#define GL_MODELVIEW11_ARB 0x872B +#define GL_MODELVIEW12_ARB 0x872C +#define GL_MODELVIEW13_ARB 0x872D +#define GL_MODELVIEW14_ARB 0x872E +#define GL_MODELVIEW15_ARB 0x872F +#define GL_MODELVIEW16_ARB 0x8730 +#define GL_MODELVIEW17_ARB 0x8731 +#define GL_MODELVIEW18_ARB 0x8732 +#define GL_MODELVIEW19_ARB 0x8733 +#define GL_MODELVIEW20_ARB 0x8734 +#define GL_MODELVIEW21_ARB 0x8735 +#define GL_MODELVIEW22_ARB 0x8736 +#define GL_MODELVIEW23_ARB 0x8737 +#define GL_MODELVIEW24_ARB 0x8738 +#define GL_MODELVIEW25_ARB 0x8739 +#define GL_MODELVIEW26_ARB 0x873A +#define GL_MODELVIEW27_ARB 0x873B +#define GL_MODELVIEW28_ARB 0x873C +#define GL_MODELVIEW29_ARB 0x873D +#define GL_MODELVIEW30_ARB 0x873E +#define GL_MODELVIEW31_ARB 0x873F +#endif + +#ifndef GL_ARB_matrix_palette +#define GL_MATRIX_PALETTE_ARB 0x8840 +#define GL_MAX_MATRIX_PALETTE_STACK_DEPTH_ARB 0x8841 +#define GL_MAX_PALETTE_MATRICES_ARB 0x8842 +#define GL_CURRENT_PALETTE_MATRIX_ARB 0x8843 +#define GL_MATRIX_INDEX_ARRAY_ARB 0x8844 +#define GL_CURRENT_MATRIX_INDEX_ARB 0x8845 +#define GL_MATRIX_INDEX_ARRAY_SIZE_ARB 0x8846 +#define GL_MATRIX_INDEX_ARRAY_TYPE_ARB 0x8847 +#define GL_MATRIX_INDEX_ARRAY_STRIDE_ARB 0x8848 +#define GL_MATRIX_INDEX_ARRAY_POINTER_ARB 0x8849 +#endif + +#ifndef GL_ARB_texture_env_combine +#define GL_COMBINE_ARB 0x8570 +#define GL_COMBINE_RGB_ARB 0x8571 +#define GL_COMBINE_ALPHA_ARB 0x8572 +#define GL_SOURCE0_RGB_ARB 0x8580 +#define GL_SOURCE1_RGB_ARB 0x8581 +#define GL_SOURCE2_RGB_ARB 0x8582 +#define GL_SOURCE0_ALPHA_ARB 0x8588 +#define GL_SOURCE1_ALPHA_ARB 0x8589 +#define GL_SOURCE2_ALPHA_ARB 0x858A +#define GL_OPERAND0_RGB_ARB 0x8590 +#define GL_OPERAND1_RGB_ARB 0x8591 +#define GL_OPERAND2_RGB_ARB 0x8592 +#define GL_OPERAND0_ALPHA_ARB 0x8598 +#define GL_OPERAND1_ALPHA_ARB 0x8599 +#define GL_OPERAND2_ALPHA_ARB 0x859A +#define GL_RGB_SCALE_ARB 0x8573 +#define GL_ADD_SIGNED_ARB 0x8574 +#define GL_INTERPOLATE_ARB 0x8575 +#define GL_SUBTRACT_ARB 0x84E7 +#define GL_CONSTANT_ARB 0x8576 +#define GL_PRIMARY_COLOR_ARB 0x8577 +#define GL_PREVIOUS_ARB 0x8578 +#endif + +#ifndef GL_ARB_texture_env_crossbar +#endif + +#ifndef GL_ARB_texture_env_dot3 +#define GL_DOT3_RGB_ARB 0x86AE +#define GL_DOT3_RGBA_ARB 0x86AF +#endif + +#ifndef GL_ARB_texture_mirrored_repeat +#define GL_MIRRORED_REPEAT_ARB 0x8370 +#endif + +#ifndef GL_ARB_depth_texture +#define GL_DEPTH_COMPONENT16_ARB 0x81A5 +#define GL_DEPTH_COMPONENT24_ARB 0x81A6 +#define GL_DEPTH_COMPONENT32_ARB 0x81A7 +#define GL_TEXTURE_DEPTH_SIZE_ARB 0x884A +#define GL_DEPTH_TEXTURE_MODE_ARB 0x884B +#endif + +#ifndef GL_ARB_shadow +#define GL_TEXTURE_COMPARE_MODE_ARB 0x884C +#define GL_TEXTURE_COMPARE_FUNC_ARB 0x884D +#define GL_COMPARE_R_TO_TEXTURE_ARB 0x884E +#endif + +#ifndef GL_ARB_shadow_ambient +#define GL_TEXTURE_COMPARE_FAIL_VALUE_ARB 0x80BF +#endif + +#ifndef GL_ARB_window_pos +#endif + +#ifndef GL_ARB_vertex_program +#define GL_COLOR_SUM_ARB 0x8458 +#define GL_VERTEX_PROGRAM_ARB 0x8620 +#define GL_VERTEX_ATTRIB_ARRAY_ENABLED_ARB 0x8622 +#define GL_VERTEX_ATTRIB_ARRAY_SIZE_ARB 0x8623 +#define GL_VERTEX_ATTRIB_ARRAY_STRIDE_ARB 0x8624 +#define GL_VERTEX_ATTRIB_ARRAY_TYPE_ARB 0x8625 +#define GL_CURRENT_VERTEX_ATTRIB_ARB 0x8626 +#define GL_PROGRAM_LENGTH_ARB 0x8627 +#define GL_PROGRAM_STRING_ARB 0x8628 +#define GL_MAX_PROGRAM_MATRIX_STACK_DEPTH_ARB 0x862E +#define GL_MAX_PROGRAM_MATRICES_ARB 0x862F +#define GL_CURRENT_MATRIX_STACK_DEPTH_ARB 0x8640 +#define GL_CURRENT_MATRIX_ARB 0x8641 +#define GL_VERTEX_PROGRAM_POINT_SIZE_ARB 0x8642 +#define GL_VERTEX_PROGRAM_TWO_SIDE_ARB 0x8643 +#define GL_VERTEX_ATTRIB_ARRAY_POINTER_ARB 0x8645 +#define GL_PROGRAM_ERROR_POSITION_ARB 0x864B +#define GL_PROGRAM_BINDING_ARB 0x8677 +#define GL_MAX_VERTEX_ATTRIBS_ARB 0x8869 +#define GL_VERTEX_ATTRIB_ARRAY_NORMALIZED_ARB 0x886A +#define GL_PROGRAM_ERROR_STRING_ARB 0x8874 +#define GL_PROGRAM_FORMAT_ASCII_ARB 0x8875 +#define GL_PROGRAM_FORMAT_ARB 0x8876 +#define GL_PROGRAM_INSTRUCTIONS_ARB 0x88A0 +#define GL_MAX_PROGRAM_INSTRUCTIONS_ARB 0x88A1 +#define GL_PROGRAM_NATIVE_INSTRUCTIONS_ARB 0x88A2 +#define GL_MAX_PROGRAM_NATIVE_INSTRUCTIONS_ARB 0x88A3 +#define GL_PROGRAM_TEMPORARIES_ARB 0x88A4 +#define GL_MAX_PROGRAM_TEMPORARIES_ARB 0x88A5 +#define GL_PROGRAM_NATIVE_TEMPORARIES_ARB 0x88A6 +#define GL_MAX_PROGRAM_NATIVE_TEMPORARIES_ARB 0x88A7 +#define GL_PROGRAM_PARAMETERS_ARB 0x88A8 +#define GL_MAX_PROGRAM_PARAMETERS_ARB 0x88A9 +#define GL_PROGRAM_NATIVE_PARAMETERS_ARB 0x88AA +#define GL_MAX_PROGRAM_NATIVE_PARAMETERS_ARB 0x88AB +#define GL_PROGRAM_ATTRIBS_ARB 0x88AC +#define GL_MAX_PROGRAM_ATTRIBS_ARB 0x88AD +#define GL_PROGRAM_NATIVE_ATTRIBS_ARB 0x88AE +#define GL_MAX_PROGRAM_NATIVE_ATTRIBS_ARB 0x88AF +#define GL_PROGRAM_ADDRESS_REGISTERS_ARB 0x88B0 +#define GL_MAX_PROGRAM_ADDRESS_REGISTERS_ARB 0x88B1 +#define GL_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB 0x88B2 +#define GL_MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB 0x88B3 +#define GL_MAX_PROGRAM_LOCAL_PARAMETERS_ARB 0x88B4 +#define GL_MAX_PROGRAM_ENV_PARAMETERS_ARB 0x88B5 +#define GL_PROGRAM_UNDER_NATIVE_LIMITS_ARB 0x88B6 +#define GL_TRANSPOSE_CURRENT_MATRIX_ARB 0x88B7 +#define GL_MATRIX0_ARB 0x88C0 +#define GL_MATRIX1_ARB 0x88C1 +#define GL_MATRIX2_ARB 0x88C2 +#define GL_MATRIX3_ARB 0x88C3 +#define GL_MATRIX4_ARB 0x88C4 +#define GL_MATRIX5_ARB 0x88C5 +#define GL_MATRIX6_ARB 0x88C6 +#define GL_MATRIX7_ARB 0x88C7 +#define GL_MATRIX8_ARB 0x88C8 +#define GL_MATRIX9_ARB 0x88C9 +#define GL_MATRIX10_ARB 0x88CA +#define GL_MATRIX11_ARB 0x88CB +#define GL_MATRIX12_ARB 0x88CC +#define GL_MATRIX13_ARB 0x88CD +#define GL_MATRIX14_ARB 0x88CE +#define GL_MATRIX15_ARB 0x88CF +#define GL_MATRIX16_ARB 0x88D0 +#define GL_MATRIX17_ARB 0x88D1 +#define GL_MATRIX18_ARB 0x88D2 +#define GL_MATRIX19_ARB 0x88D3 +#define GL_MATRIX20_ARB 0x88D4 +#define GL_MATRIX21_ARB 0x88D5 +#define GL_MATRIX22_ARB 0x88D6 +#define GL_MATRIX23_ARB 0x88D7 +#define GL_MATRIX24_ARB 0x88D8 +#define GL_MATRIX25_ARB 0x88D9 +#define GL_MATRIX26_ARB 0x88DA +#define GL_MATRIX27_ARB 0x88DB +#define GL_MATRIX28_ARB 0x88DC +#define GL_MATRIX29_ARB 0x88DD +#define GL_MATRIX30_ARB 0x88DE +#define GL_MATRIX31_ARB 0x88DF +#endif + +#ifndef GL_ARB_fragment_program +#define GL_FRAGMENT_PROGRAM_ARB 0x8804 +#define GL_PROGRAM_ALU_INSTRUCTIONS_ARB 0x8805 +#define GL_PROGRAM_TEX_INSTRUCTIONS_ARB 0x8806 +#define GL_PROGRAM_TEX_INDIRECTIONS_ARB 0x8807 +#define GL_PROGRAM_NATIVE_ALU_INSTRUCTIONS_ARB 0x8808 +#define GL_PROGRAM_NATIVE_TEX_INSTRUCTIONS_ARB 0x8809 +#define GL_PROGRAM_NATIVE_TEX_INDIRECTIONS_ARB 0x880A +#define GL_MAX_PROGRAM_ALU_INSTRUCTIONS_ARB 0x880B +#define GL_MAX_PROGRAM_TEX_INSTRUCTIONS_ARB 0x880C +#define GL_MAX_PROGRAM_TEX_INDIRECTIONS_ARB 0x880D +#define GL_MAX_PROGRAM_NATIVE_ALU_INSTRUCTIONS_ARB 0x880E +#define GL_MAX_PROGRAM_NATIVE_TEX_INSTRUCTIONS_ARB 0x880F +#define GL_MAX_PROGRAM_NATIVE_TEX_INDIRECTIONS_ARB 0x8810 +#define GL_MAX_TEXTURE_COORDS_ARB 0x8871 +#define GL_MAX_TEXTURE_IMAGE_UNITS_ARB 0x8872 +#endif + +#ifndef GL_ARB_vertex_buffer_object +#define GL_BUFFER_SIZE_ARB 0x8764 +#define GL_BUFFER_USAGE_ARB 0x8765 +#define GL_ARRAY_BUFFER_ARB 0x8892 +#define GL_ELEMENT_ARRAY_BUFFER_ARB 0x8893 +#define GL_ARRAY_BUFFER_BINDING_ARB 0x8894 +#define GL_ELEMENT_ARRAY_BUFFER_BINDING_ARB 0x8895 +#define GL_VERTEX_ARRAY_BUFFER_BINDING_ARB 0x8896 +#define GL_NORMAL_ARRAY_BUFFER_BINDING_ARB 0x8897 +#define GL_COLOR_ARRAY_BUFFER_BINDING_ARB 0x8898 +#define GL_INDEX_ARRAY_BUFFER_BINDING_ARB 0x8899 +#define GL_TEXTURE_COORD_ARRAY_BUFFER_BINDING_ARB 0x889A +#define GL_EDGE_FLAG_ARRAY_BUFFER_BINDING_ARB 0x889B +#define GL_SECONDARY_COLOR_ARRAY_BUFFER_BINDING_ARB 0x889C +#define GL_FOG_COORDINATE_ARRAY_BUFFER_BINDING_ARB 0x889D +#define GL_WEIGHT_ARRAY_BUFFER_BINDING_ARB 0x889E +#define GL_VERTEX_ATTRIB_ARRAY_BUFFER_BINDING_ARB 0x889F +#define GL_READ_ONLY_ARB 0x88B8 +#define GL_WRITE_ONLY_ARB 0x88B9 +#define GL_READ_WRITE_ARB 0x88BA +#define GL_BUFFER_ACCESS_ARB 0x88BB +#define GL_BUFFER_MAPPED_ARB 0x88BC +#define GL_BUFFER_MAP_POINTER_ARB 0x88BD +#define GL_STREAM_DRAW_ARB 0x88E0 +#define GL_STREAM_READ_ARB 0x88E1 +#define GL_STREAM_COPY_ARB 0x88E2 +#define GL_STATIC_DRAW_ARB 0x88E4 +#define GL_STATIC_READ_ARB 0x88E5 +#define GL_STATIC_COPY_ARB 0x88E6 +#define GL_DYNAMIC_DRAW_ARB 0x88E8 +#define GL_DYNAMIC_READ_ARB 0x88E9 +#define GL_DYNAMIC_COPY_ARB 0x88EA +#endif + +#ifndef GL_ARB_occlusion_query +#define GL_QUERY_COUNTER_BITS_ARB 0x8864 +#define GL_CURRENT_QUERY_ARB 0x8865 +#define GL_QUERY_RESULT_ARB 0x8866 +#define GL_QUERY_RESULT_AVAILABLE_ARB 0x8867 +#define GL_SAMPLES_PASSED_ARB 0x8914 +#endif + +#ifndef GL_ARB_shader_objects +#define GL_PROGRAM_OBJECT_ARB 0x8B40 +#define GL_SHADER_OBJECT_ARB 0x8B48 +#define GL_OBJECT_TYPE_ARB 0x8B4E +#define GL_OBJECT_SUBTYPE_ARB 0x8B4F +#define GL_FLOAT_VEC2_ARB 0x8B50 +#define GL_FLOAT_VEC3_ARB 0x8B51 +#define GL_FLOAT_VEC4_ARB 0x8B52 +#define GL_INT_VEC2_ARB 0x8B53 +#define GL_INT_VEC3_ARB 0x8B54 +#define GL_INT_VEC4_ARB 0x8B55 +#define GL_BOOL_ARB 0x8B56 +#define GL_BOOL_VEC2_ARB 0x8B57 +#define GL_BOOL_VEC3_ARB 0x8B58 +#define GL_BOOL_VEC4_ARB 0x8B59 +#define GL_FLOAT_MAT2_ARB 0x8B5A +#define GL_FLOAT_MAT3_ARB 0x8B5B +#define GL_FLOAT_MAT4_ARB 0x8B5C +#define GL_SAMPLER_1D_ARB 0x8B5D +#define GL_SAMPLER_2D_ARB 0x8B5E +#define GL_SAMPLER_3D_ARB 0x8B5F +#define GL_SAMPLER_CUBE_ARB 0x8B60 +#define GL_SAMPLER_1D_SHADOW_ARB 0x8B61 +#define GL_SAMPLER_2D_SHADOW_ARB 0x8B62 +#define GL_SAMPLER_2D_RECT_ARB 0x8B63 +#define GL_SAMPLER_2D_RECT_SHADOW_ARB 0x8B64 +#define GL_OBJECT_DELETE_STATUS_ARB 0x8B80 +#define GL_OBJECT_COMPILE_STATUS_ARB 0x8B81 +#define GL_OBJECT_LINK_STATUS_ARB 0x8B82 +#define GL_OBJECT_VALIDATE_STATUS_ARB 0x8B83 +#define GL_OBJECT_INFO_LOG_LENGTH_ARB 0x8B84 +#define GL_OBJECT_ATTACHED_OBJECTS_ARB 0x8B85 +#define GL_OBJECT_ACTIVE_UNIFORMS_ARB 0x8B86 +#define GL_OBJECT_ACTIVE_UNIFORM_MAX_LENGTH_ARB 0x8B87 +#define GL_OBJECT_SHADER_SOURCE_LENGTH_ARB 0x8B88 +#endif + +#ifndef GL_ARB_vertex_shader +#define GL_VERTEX_SHADER_ARB 0x8B31 +#define GL_MAX_VERTEX_UNIFORM_COMPONENTS_ARB 0x8B4A +#define GL_MAX_VARYING_FLOATS_ARB 0x8B4B +#define GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS_ARB 0x8B4C +#define GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS_ARB 0x8B4D +#define GL_OBJECT_ACTIVE_ATTRIBUTES_ARB 0x8B89 +#define GL_OBJECT_ACTIVE_ATTRIBUTE_MAX_LENGTH_ARB 0x8B8A +#endif + +#ifndef GL_ARB_fragment_shader +#define GL_FRAGMENT_SHADER_ARB 0x8B30 +#define GL_MAX_FRAGMENT_UNIFORM_COMPONENTS_ARB 0x8B49 +#define GL_FRAGMENT_SHADER_DERIVATIVE_HINT_ARB 0x8B8B +#endif + +#ifndef GL_ARB_shading_language_100 +#define GL_SHADING_LANGUAGE_VERSION_ARB 0x8B8C +#endif + +#ifndef GL_ARB_texture_non_power_of_two +#endif + +#ifndef GL_ARB_point_sprite +#define GL_POINT_SPRITE_ARB 0x8861 +#define GL_COORD_REPLACE_ARB 0x8862 +#endif + +#ifndef GL_ARB_fragment_program_shadow +#endif + +#ifndef GL_ARB_draw_buffers +#define GL_MAX_DRAW_BUFFERS_ARB 0x8824 +#define GL_DRAW_BUFFER0_ARB 0x8825 +#define GL_DRAW_BUFFER1_ARB 0x8826 +#define GL_DRAW_BUFFER2_ARB 0x8827 +#define GL_DRAW_BUFFER3_ARB 0x8828 +#define GL_DRAW_BUFFER4_ARB 0x8829 +#define GL_DRAW_BUFFER5_ARB 0x882A +#define GL_DRAW_BUFFER6_ARB 0x882B +#define GL_DRAW_BUFFER7_ARB 0x882C +#define GL_DRAW_BUFFER8_ARB 0x882D +#define GL_DRAW_BUFFER9_ARB 0x882E +#define GL_DRAW_BUFFER10_ARB 0x882F +#define GL_DRAW_BUFFER11_ARB 0x8830 +#define GL_DRAW_BUFFER12_ARB 0x8831 +#define GL_DRAW_BUFFER13_ARB 0x8832 +#define GL_DRAW_BUFFER14_ARB 0x8833 +#define GL_DRAW_BUFFER15_ARB 0x8834 +#endif + +#ifndef GL_ARB_texture_rectangle +#define GL_TEXTURE_RECTANGLE_ARB 0x84F5 +#define GL_TEXTURE_BINDING_RECTANGLE_ARB 0x84F6 +#define GL_PROXY_TEXTURE_RECTANGLE_ARB 0x84F7 +#define GL_MAX_RECTANGLE_TEXTURE_SIZE_ARB 0x84F8 +#endif + +#ifndef GL_ARB_color_buffer_float +#define GL_RGBA_FLOAT_MODE_ARB 0x8820 +#define GL_CLAMP_VERTEX_COLOR_ARB 0x891A +#define GL_CLAMP_FRAGMENT_COLOR_ARB 0x891B +#define GL_CLAMP_READ_COLOR_ARB 0x891C +#define GL_FIXED_ONLY_ARB 0x891D +#endif + +#ifndef GL_ARB_half_float_pixel +#define GL_HALF_FLOAT_ARB 0x140B +#endif + +#ifndef GL_ARB_texture_float +#define GL_TEXTURE_RED_TYPE_ARB 0x8C10 +#define GL_TEXTURE_GREEN_TYPE_ARB 0x8C11 +#define GL_TEXTURE_BLUE_TYPE_ARB 0x8C12 +#define GL_TEXTURE_ALPHA_TYPE_ARB 0x8C13 +#define GL_TEXTURE_LUMINANCE_TYPE_ARB 0x8C14 +#define GL_TEXTURE_INTENSITY_TYPE_ARB 0x8C15 +#define GL_TEXTURE_DEPTH_TYPE_ARB 0x8C16 +#define GL_UNSIGNED_NORMALIZED_ARB 0x8C17 +#define GL_RGBA32F_ARB 0x8814 +#define GL_RGB32F_ARB 0x8815 +#define GL_ALPHA32F_ARB 0x8816 +#define GL_INTENSITY32F_ARB 0x8817 +#define GL_LUMINANCE32F_ARB 0x8818 +#define GL_LUMINANCE_ALPHA32F_ARB 0x8819 +#define GL_RGBA16F_ARB 0x881A +#define GL_RGB16F_ARB 0x881B +#define GL_ALPHA16F_ARB 0x881C +#define GL_INTENSITY16F_ARB 0x881D +#define GL_LUMINANCE16F_ARB 0x881E +#define GL_LUMINANCE_ALPHA16F_ARB 0x881F +#endif + +#ifndef GL_ARB_pixel_buffer_object +#define GL_PIXEL_PACK_BUFFER_ARB 0x88EB +#define GL_PIXEL_UNPACK_BUFFER_ARB 0x88EC +#define GL_PIXEL_PACK_BUFFER_BINDING_ARB 0x88ED +#define GL_PIXEL_UNPACK_BUFFER_BINDING_ARB 0x88EF +#endif + +#ifndef GL_ARB_depth_buffer_float +#define GL_DEPTH_COMPONENT32F 0x8CAC +#define GL_DEPTH32F_STENCIL8 0x8CAD +#define GL_FLOAT_32_UNSIGNED_INT_24_8_REV 0x8DAD +#endif + +#ifndef GL_ARB_draw_instanced +#endif + +#ifndef GL_ARB_framebuffer_object +#define GL_INVALID_FRAMEBUFFER_OPERATION 0x0506 +#define GL_FRAMEBUFFER_ATTACHMENT_COLOR_ENCODING 0x8210 +#define GL_FRAMEBUFFER_ATTACHMENT_COMPONENT_TYPE 0x8211 +#define GL_FRAMEBUFFER_ATTACHMENT_RED_SIZE 0x8212 +#define GL_FRAMEBUFFER_ATTACHMENT_GREEN_SIZE 0x8213 +#define GL_FRAMEBUFFER_ATTACHMENT_BLUE_SIZE 0x8214 +#define GL_FRAMEBUFFER_ATTACHMENT_ALPHA_SIZE 0x8215 +#define GL_FRAMEBUFFER_ATTACHMENT_DEPTH_SIZE 0x8216 +#define GL_FRAMEBUFFER_ATTACHMENT_STENCIL_SIZE 0x8217 +#define GL_FRAMEBUFFER_DEFAULT 0x8218 +#define GL_FRAMEBUFFER_UNDEFINED 0x8219 +#define GL_DEPTH_STENCIL_ATTACHMENT 0x821A +#define GL_MAX_RENDERBUFFER_SIZE 0x84E8 +#define GL_DEPTH_STENCIL 0x84F9 +#define GL_UNSIGNED_INT_24_8 0x84FA +#define GL_DEPTH24_STENCIL8 0x88F0 +#define GL_TEXTURE_STENCIL_SIZE 0x88F1 +#define GL_TEXTURE_RED_TYPE 0x8C10 +#define GL_TEXTURE_GREEN_TYPE 0x8C11 +#define GL_TEXTURE_BLUE_TYPE 0x8C12 +#define GL_TEXTURE_ALPHA_TYPE 0x8C13 +#define GL_TEXTURE_DEPTH_TYPE 0x8C16 +#define GL_UNSIGNED_NORMALIZED 0x8C17 +#define GL_FRAMEBUFFER_BINDING 0x8CA6 +#define GL_DRAW_FRAMEBUFFER_BINDING GL_FRAMEBUFFER_BINDING +#define GL_RENDERBUFFER_BINDING 0x8CA7 +#define GL_READ_FRAMEBUFFER 0x8CA8 +#define GL_DRAW_FRAMEBUFFER 0x8CA9 +#define GL_READ_FRAMEBUFFER_BINDING 0x8CAA +#define GL_RENDERBUFFER_SAMPLES 0x8CAB +#define GL_FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE 0x8CD0 +#define GL_FRAMEBUFFER_ATTACHMENT_OBJECT_NAME 0x8CD1 +#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LEVEL 0x8CD2 +#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_CUBE_MAP_FACE 0x8CD3 +#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER 0x8CD4 +#define GL_FRAMEBUFFER_COMPLETE 0x8CD5 +#define GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT 0x8CD6 +#define GL_FRAMEBUFFER_INCOMPLETE_MISSING_ATTACHMENT 0x8CD7 +#define GL_FRAMEBUFFER_INCOMPLETE_DRAW_BUFFER 0x8CDB +#define GL_FRAMEBUFFER_INCOMPLETE_READ_BUFFER 0x8CDC +#define GL_FRAMEBUFFER_UNSUPPORTED 0x8CDD +#define GL_MAX_COLOR_ATTACHMENTS 0x8CDF +#define GL_COLOR_ATTACHMENT0 0x8CE0 +#define GL_COLOR_ATTACHMENT1 0x8CE1 +#define GL_COLOR_ATTACHMENT2 0x8CE2 +#define GL_COLOR_ATTACHMENT3 0x8CE3 +#define GL_COLOR_ATTACHMENT4 0x8CE4 +#define GL_COLOR_ATTACHMENT5 0x8CE5 +#define GL_COLOR_ATTACHMENT6 0x8CE6 +#define GL_COLOR_ATTACHMENT7 0x8CE7 +#define GL_COLOR_ATTACHMENT8 0x8CE8 +#define GL_COLOR_ATTACHMENT9 0x8CE9 +#define GL_COLOR_ATTACHMENT10 0x8CEA +#define GL_COLOR_ATTACHMENT11 0x8CEB +#define GL_COLOR_ATTACHMENT12 0x8CEC +#define GL_COLOR_ATTACHMENT13 0x8CED +#define GL_COLOR_ATTACHMENT14 0x8CEE +#define GL_COLOR_ATTACHMENT15 0x8CEF +#define GL_DEPTH_ATTACHMENT 0x8D00 +#define GL_STENCIL_ATTACHMENT 0x8D20 +#define GL_FRAMEBUFFER 0x8D40 +#define GL_RENDERBUFFER 0x8D41 +#define GL_RENDERBUFFER_WIDTH 0x8D42 +#define GL_RENDERBUFFER_HEIGHT 0x8D43 +#define GL_RENDERBUFFER_INTERNAL_FORMAT 0x8D44 +#define GL_STENCIL_INDEX1 0x8D46 +#define GL_STENCIL_INDEX4 0x8D47 +#define GL_STENCIL_INDEX8 0x8D48 +#define GL_STENCIL_INDEX16 0x8D49 +#define GL_RENDERBUFFER_RED_SIZE 0x8D50 +#define GL_RENDERBUFFER_GREEN_SIZE 0x8D51 +#define GL_RENDERBUFFER_BLUE_SIZE 0x8D52 +#define GL_RENDERBUFFER_ALPHA_SIZE 0x8D53 +#define GL_RENDERBUFFER_DEPTH_SIZE 0x8D54 +#define GL_RENDERBUFFER_STENCIL_SIZE 0x8D55 +#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE 0x8D56 +#define GL_MAX_SAMPLES 0x8D57 +#endif + +#ifndef GL_ARB_framebuffer_object_DEPRECATED +#define GL_INDEX 0x8222 +#define GL_TEXTURE_LUMINANCE_TYPE 0x8C14 +#define GL_TEXTURE_INTENSITY_TYPE 0x8C15 +#endif + +#ifndef GL_ARB_framebuffer_sRGB +#define GL_FRAMEBUFFER_SRGB 0x8DB9 +#endif + +#ifndef GL_ARB_geometry_shader4 +#define GL_LINES_ADJACENCY_ARB 0x000A +#define GL_LINE_STRIP_ADJACENCY_ARB 0x000B +#define GL_TRIANGLES_ADJACENCY_ARB 0x000C +#define GL_TRIANGLE_STRIP_ADJACENCY_ARB 0x000D +#define GL_PROGRAM_POINT_SIZE_ARB 0x8642 +#define GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS_ARB 0x8C29 +#define GL_FRAMEBUFFER_ATTACHMENT_LAYERED_ARB 0x8DA7 +#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS_ARB 0x8DA8 +#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_COUNT_ARB 0x8DA9 +#define GL_GEOMETRY_SHADER_ARB 0x8DD9 +#define GL_GEOMETRY_VERTICES_OUT_ARB 0x8DDA +#define GL_GEOMETRY_INPUT_TYPE_ARB 0x8DDB +#define GL_GEOMETRY_OUTPUT_TYPE_ARB 0x8DDC +#define GL_MAX_GEOMETRY_VARYING_COMPONENTS_ARB 0x8DDD +#define GL_MAX_VERTEX_VARYING_COMPONENTS_ARB 0x8DDE +#define GL_MAX_GEOMETRY_UNIFORM_COMPONENTS_ARB 0x8DDF +#define GL_MAX_GEOMETRY_OUTPUT_VERTICES_ARB 0x8DE0 +#define GL_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS_ARB 0x8DE1 +/* reuse GL_MAX_VARYING_COMPONENTS */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER */ +#endif + +#ifndef GL_ARB_half_float_vertex +#define GL_HALF_FLOAT 0x140B +#endif + +#ifndef GL_ARB_instanced_arrays +#define GL_VERTEX_ATTRIB_ARRAY_DIVISOR_ARB 0x88FE +#endif + +#ifndef GL_ARB_map_buffer_range +#define GL_MAP_READ_BIT 0x0001 +#define GL_MAP_WRITE_BIT 0x0002 +#define GL_MAP_INVALIDATE_RANGE_BIT 0x0004 +#define GL_MAP_INVALIDATE_BUFFER_BIT 0x0008 +#define GL_MAP_FLUSH_EXPLICIT_BIT 0x0010 +#define GL_MAP_UNSYNCHRONIZED_BIT 0x0020 +#endif + +#ifndef GL_ARB_texture_buffer_object +#define GL_TEXTURE_BUFFER_ARB 0x8C2A +#define GL_MAX_TEXTURE_BUFFER_SIZE_ARB 0x8C2B +#define GL_TEXTURE_BINDING_BUFFER_ARB 0x8C2C +#define GL_TEXTURE_BUFFER_DATA_STORE_BINDING_ARB 0x8C2D +#define GL_TEXTURE_BUFFER_FORMAT_ARB 0x8C2E +#endif + +#ifndef GL_ARB_texture_compression_rgtc +#define GL_COMPRESSED_RED_RGTC1 0x8DBB +#define GL_COMPRESSED_SIGNED_RED_RGTC1 0x8DBC +#define GL_COMPRESSED_RG_RGTC2 0x8DBD +#define GL_COMPRESSED_SIGNED_RG_RGTC2 0x8DBE +#endif + +#ifndef GL_ARB_texture_rg +#define GL_RG 0x8227 +#define GL_RG_INTEGER 0x8228 +#define GL_R8 0x8229 +#define GL_R16 0x822A +#define GL_RG8 0x822B +#define GL_RG16 0x822C +#define GL_R16F 0x822D +#define GL_R32F 0x822E +#define GL_RG16F 0x822F +#define GL_RG32F 0x8230 +#define GL_R8I 0x8231 +#define GL_R8UI 0x8232 +#define GL_R16I 0x8233 +#define GL_R16UI 0x8234 +#define GL_R32I 0x8235 +#define GL_R32UI 0x8236 +#define GL_RG8I 0x8237 +#define GL_RG8UI 0x8238 +#define GL_RG16I 0x8239 +#define GL_RG16UI 0x823A +#define GL_RG32I 0x823B +#define GL_RG32UI 0x823C +#endif + +#ifndef GL_ARB_vertex_array_object +#define GL_VERTEX_ARRAY_BINDING 0x85B5 +#endif + +#ifndef GL_ARB_uniform_buffer_object +#define GL_UNIFORM_BUFFER 0x8A11 +#define GL_UNIFORM_BUFFER_BINDING 0x8A28 +#define GL_UNIFORM_BUFFER_START 0x8A29 +#define GL_UNIFORM_BUFFER_SIZE 0x8A2A +#define GL_MAX_VERTEX_UNIFORM_BLOCKS 0x8A2B +#define GL_MAX_GEOMETRY_UNIFORM_BLOCKS 0x8A2C +#define GL_MAX_FRAGMENT_UNIFORM_BLOCKS 0x8A2D +#define GL_MAX_COMBINED_UNIFORM_BLOCKS 0x8A2E +#define GL_MAX_UNIFORM_BUFFER_BINDINGS 0x8A2F +#define GL_MAX_UNIFORM_BLOCK_SIZE 0x8A30 +#define GL_MAX_COMBINED_VERTEX_UNIFORM_COMPONENTS 0x8A31 +#define GL_MAX_COMBINED_GEOMETRY_UNIFORM_COMPONENTS 0x8A32 +#define GL_MAX_COMBINED_FRAGMENT_UNIFORM_COMPONENTS 0x8A33 +#define GL_UNIFORM_BUFFER_OFFSET_ALIGNMENT 0x8A34 +#define GL_ACTIVE_UNIFORM_BLOCK_MAX_NAME_LENGTH 0x8A35 +#define GL_ACTIVE_UNIFORM_BLOCKS 0x8A36 +#define GL_UNIFORM_TYPE 0x8A37 +#define GL_UNIFORM_SIZE 0x8A38 +#define GL_UNIFORM_NAME_LENGTH 0x8A39 +#define GL_UNIFORM_BLOCK_INDEX 0x8A3A +#define GL_UNIFORM_OFFSET 0x8A3B +#define GL_UNIFORM_ARRAY_STRIDE 0x8A3C +#define GL_UNIFORM_MATRIX_STRIDE 0x8A3D +#define GL_UNIFORM_IS_ROW_MAJOR 0x8A3E +#define GL_UNIFORM_BLOCK_BINDING 0x8A3F +#define GL_UNIFORM_BLOCK_DATA_SIZE 0x8A40 +#define GL_UNIFORM_BLOCK_NAME_LENGTH 0x8A41 +#define GL_UNIFORM_BLOCK_ACTIVE_UNIFORMS 0x8A42 +#define GL_UNIFORM_BLOCK_ACTIVE_UNIFORM_INDICES 0x8A43 +#define GL_UNIFORM_BLOCK_REFERENCED_BY_VERTEX_SHADER 0x8A44 +#define GL_UNIFORM_BLOCK_REFERENCED_BY_GEOMETRY_SHADER 0x8A45 +#define GL_UNIFORM_BLOCK_REFERENCED_BY_FRAGMENT_SHADER 0x8A46 +#define GL_INVALID_INDEX 0xFFFFFFFFu +#endif + +#ifndef GL_ARB_compatibility +/* ARB_compatibility just defines tokens from core 3.0 */ +#endif + +#ifndef GL_ARB_copy_buffer +#define GL_COPY_READ_BUFFER 0x8F36 +#define GL_COPY_WRITE_BUFFER 0x8F37 +#endif + +#ifndef GL_ARB_shader_texture_lod +#endif + +#ifndef GL_ARB_depth_clamp +#define GL_DEPTH_CLAMP 0x864F +#endif + +#ifndef GL_ARB_draw_elements_base_vertex +#endif + +#ifndef GL_ARB_fragment_coord_conventions +#endif + +#ifndef GL_ARB_provoking_vertex +#define GL_QUADS_FOLLOW_PROVOKING_VERTEX_CONVENTION 0x8E4C +#define GL_FIRST_VERTEX_CONVENTION 0x8E4D +#define GL_LAST_VERTEX_CONVENTION 0x8E4E +#define GL_PROVOKING_VERTEX 0x8E4F +#endif + +#ifndef GL_ARB_seamless_cube_map +#define GL_TEXTURE_CUBE_MAP_SEAMLESS 0x884F +#endif + +#ifndef GL_ARB_sync +#define GL_MAX_SERVER_WAIT_TIMEOUT 0x9111 +#define GL_OBJECT_TYPE 0x9112 +#define GL_SYNC_CONDITION 0x9113 +#define GL_SYNC_STATUS 0x9114 +#define GL_SYNC_FLAGS 0x9115 +#define GL_SYNC_FENCE 0x9116 +#define GL_SYNC_GPU_COMMANDS_COMPLETE 0x9117 +#define GL_UNSIGNALED 0x9118 +#define GL_SIGNALED 0x9119 +#define GL_ALREADY_SIGNALED 0x911A +#define GL_TIMEOUT_EXPIRED 0x911B +#define GL_CONDITION_SATISFIED 0x911C +#define GL_WAIT_FAILED 0x911D +#define GL_SYNC_FLUSH_COMMANDS_BIT 0x00000001 +#define GL_TIMEOUT_IGNORED 0xFFFFFFFFFFFFFFFFull +#endif + +#ifndef GL_ARB_texture_multisample +#define GL_SAMPLE_POSITION 0x8E50 +#define GL_SAMPLE_MASK 0x8E51 +#define GL_SAMPLE_MASK_VALUE 0x8E52 +#define GL_MAX_SAMPLE_MASK_WORDS 0x8E59 +#define GL_TEXTURE_2D_MULTISAMPLE 0x9100 +#define GL_PROXY_TEXTURE_2D_MULTISAMPLE 0x9101 +#define GL_TEXTURE_2D_MULTISAMPLE_ARRAY 0x9102 +#define GL_PROXY_TEXTURE_2D_MULTISAMPLE_ARRAY 0x9103 +#define GL_TEXTURE_BINDING_2D_MULTISAMPLE 0x9104 +#define GL_TEXTURE_BINDING_2D_MULTISAMPLE_ARRAY 0x9105 +#define GL_TEXTURE_SAMPLES 0x9106 +#define GL_TEXTURE_FIXED_SAMPLE_LOCATIONS 0x9107 +#define GL_SAMPLER_2D_MULTISAMPLE 0x9108 +#define GL_INT_SAMPLER_2D_MULTISAMPLE 0x9109 +#define GL_UNSIGNED_INT_SAMPLER_2D_MULTISAMPLE 0x910A +#define GL_SAMPLER_2D_MULTISAMPLE_ARRAY 0x910B +#define GL_INT_SAMPLER_2D_MULTISAMPLE_ARRAY 0x910C +#define GL_UNSIGNED_INT_SAMPLER_2D_MULTISAMPLE_ARRAY 0x910D +#define GL_MAX_COLOR_TEXTURE_SAMPLES 0x910E +#define GL_MAX_DEPTH_TEXTURE_SAMPLES 0x910F +#define GL_MAX_INTEGER_SAMPLES 0x9110 +#endif + +#ifndef GL_ARB_vertex_array_bgra +/* reuse GL_BGRA */ +#endif + +#ifndef GL_ARB_draw_buffers_blend +#endif + +#ifndef GL_ARB_sample_shading +#define GL_SAMPLE_SHADING_ARB 0x8C36 +#define GL_MIN_SAMPLE_SHADING_VALUE_ARB 0x8C37 +#endif + +#ifndef GL_ARB_texture_cube_map_array +#define GL_TEXTURE_CUBE_MAP_ARRAY_ARB 0x9009 +#define GL_TEXTURE_BINDING_CUBE_MAP_ARRAY_ARB 0x900A +#define GL_PROXY_TEXTURE_CUBE_MAP_ARRAY_ARB 0x900B +#define GL_SAMPLER_CUBE_MAP_ARRAY_ARB 0x900C +#define GL_SAMPLER_CUBE_MAP_ARRAY_SHADOW_ARB 0x900D +#define GL_INT_SAMPLER_CUBE_MAP_ARRAY_ARB 0x900E +#define GL_UNSIGNED_INT_SAMPLER_CUBE_MAP_ARRAY_ARB 0x900F +#endif + +#ifndef GL_ARB_texture_gather +#define GL_MIN_PROGRAM_TEXTURE_GATHER_OFFSET_ARB 0x8E5E +#define GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET_ARB 0x8E5F +#endif + +#ifndef GL_ARB_texture_query_lod +#endif + +#ifndef GL_ARB_shading_language_include +#define GL_SHADER_INCLUDE_ARB 0x8DAE +#define GL_NAMED_STRING_LENGTH_ARB 0x8DE9 +#define GL_NAMED_STRING_TYPE_ARB 0x8DEA +#endif + +#ifndef GL_ARB_texture_compression_bptc +#define GL_COMPRESSED_RGBA_BPTC_UNORM_ARB 0x8E8C +#define GL_COMPRESSED_SRGB_ALPHA_BPTC_UNORM_ARB 0x8E8D +#define GL_COMPRESSED_RGB_BPTC_SIGNED_FLOAT_ARB 0x8E8E +#define GL_COMPRESSED_RGB_BPTC_UNSIGNED_FLOAT_ARB 0x8E8F +#endif + +#ifndef GL_ARB_blend_func_extended +#define GL_SRC1_COLOR 0x88F9 +/* reuse GL_SRC1_ALPHA */ +#define GL_ONE_MINUS_SRC1_COLOR 0x88FA +#define GL_ONE_MINUS_SRC1_ALPHA 0x88FB +#define GL_MAX_DUAL_SOURCE_DRAW_BUFFERS 0x88FC +#endif + +#ifndef GL_ARB_explicit_attrib_location +#endif + +#ifndef GL_ARB_occlusion_query2 +#define GL_ANY_SAMPLES_PASSED 0x8C2F +#endif + +#ifndef GL_ARB_sampler_objects +#define GL_SAMPLER_BINDING 0x8919 +#endif + +#ifndef GL_ARB_shader_bit_encoding +#endif + +#ifndef GL_ARB_texture_rgb10_a2ui +#define GL_RGB10_A2UI 0x906F +#endif + +#ifndef GL_ARB_texture_swizzle +#define GL_TEXTURE_SWIZZLE_R 0x8E42 +#define GL_TEXTURE_SWIZZLE_G 0x8E43 +#define GL_TEXTURE_SWIZZLE_B 0x8E44 +#define GL_TEXTURE_SWIZZLE_A 0x8E45 +#define GL_TEXTURE_SWIZZLE_RGBA 0x8E46 +#endif + +#ifndef GL_ARB_timer_query +#define GL_TIME_ELAPSED 0x88BF +#define GL_TIMESTAMP 0x8E28 +#endif + +#ifndef GL_ARB_vertex_type_2_10_10_10_rev +/* reuse GL_UNSIGNED_INT_2_10_10_10_REV */ +#define GL_INT_2_10_10_10_REV 0x8D9F +#endif + +#ifndef GL_ARB_draw_indirect +#define GL_DRAW_INDIRECT_BUFFER 0x8F3F +#define GL_DRAW_INDIRECT_BUFFER_BINDING 0x8F43 +#endif + +#ifndef GL_ARB_gpu_shader5 +#define GL_GEOMETRY_SHADER_INVOCATIONS 0x887F +#define GL_MAX_GEOMETRY_SHADER_INVOCATIONS 0x8E5A +#define GL_MIN_FRAGMENT_INTERPOLATION_OFFSET 0x8E5B +#define GL_MAX_FRAGMENT_INTERPOLATION_OFFSET 0x8E5C +#define GL_FRAGMENT_INTERPOLATION_OFFSET_BITS 0x8E5D +/* reuse GL_MAX_VERTEX_STREAMS */ +#endif + +#ifndef GL_ARB_gpu_shader_fp64 +/* reuse GL_DOUBLE */ +#define GL_DOUBLE_VEC2 0x8FFC +#define GL_DOUBLE_VEC3 0x8FFD +#define GL_DOUBLE_VEC4 0x8FFE +#define GL_DOUBLE_MAT2 0x8F46 +#define GL_DOUBLE_MAT3 0x8F47 +#define GL_DOUBLE_MAT4 0x8F48 +#define GL_DOUBLE_MAT2x3 0x8F49 +#define GL_DOUBLE_MAT2x4 0x8F4A +#define GL_DOUBLE_MAT3x2 0x8F4B +#define GL_DOUBLE_MAT3x4 0x8F4C +#define GL_DOUBLE_MAT4x2 0x8F4D +#define GL_DOUBLE_MAT4x3 0x8F4E +#endif + +#ifndef GL_ARB_shader_subroutine +#define GL_ACTIVE_SUBROUTINES 0x8DE5 +#define GL_ACTIVE_SUBROUTINE_UNIFORMS 0x8DE6 +#define GL_ACTIVE_SUBROUTINE_UNIFORM_LOCATIONS 0x8E47 +#define GL_ACTIVE_SUBROUTINE_MAX_LENGTH 0x8E48 +#define GL_ACTIVE_SUBROUTINE_UNIFORM_MAX_LENGTH 0x8E49 +#define GL_MAX_SUBROUTINES 0x8DE7 +#define GL_MAX_SUBROUTINE_UNIFORM_LOCATIONS 0x8DE8 +#define GL_NUM_COMPATIBLE_SUBROUTINES 0x8E4A +#define GL_COMPATIBLE_SUBROUTINES 0x8E4B +/* reuse GL_UNIFORM_SIZE */ +/* reuse GL_UNIFORM_NAME_LENGTH */ +#endif + +#ifndef GL_ARB_tessellation_shader +#define GL_PATCHES 0x000E +#define GL_PATCH_VERTICES 0x8E72 +#define GL_PATCH_DEFAULT_INNER_LEVEL 0x8E73 +#define GL_PATCH_DEFAULT_OUTER_LEVEL 0x8E74 +#define GL_TESS_CONTROL_OUTPUT_VERTICES 0x8E75 +#define GL_TESS_GEN_MODE 0x8E76 +#define GL_TESS_GEN_SPACING 0x8E77 +#define GL_TESS_GEN_VERTEX_ORDER 0x8E78 +#define GL_TESS_GEN_POINT_MODE 0x8E79 +/* reuse GL_TRIANGLES */ +/* reuse GL_QUADS */ +#define GL_ISOLINES 0x8E7A +/* reuse GL_EQUAL */ +#define GL_FRACTIONAL_ODD 0x8E7B +#define GL_FRACTIONAL_EVEN 0x8E7C +/* reuse GL_CCW */ +/* reuse GL_CW */ +#define GL_MAX_PATCH_VERTICES 0x8E7D +#define GL_MAX_TESS_GEN_LEVEL 0x8E7E +#define GL_MAX_TESS_CONTROL_UNIFORM_COMPONENTS 0x8E7F +#define GL_MAX_TESS_EVALUATION_UNIFORM_COMPONENTS 0x8E80 +#define GL_MAX_TESS_CONTROL_TEXTURE_IMAGE_UNITS 0x8E81 +#define GL_MAX_TESS_EVALUATION_TEXTURE_IMAGE_UNITS 0x8E82 +#define GL_MAX_TESS_CONTROL_OUTPUT_COMPONENTS 0x8E83 +#define GL_MAX_TESS_PATCH_COMPONENTS 0x8E84 +#define GL_MAX_TESS_CONTROL_TOTAL_OUTPUT_COMPONENTS 0x8E85 +#define GL_MAX_TESS_EVALUATION_OUTPUT_COMPONENTS 0x8E86 +#define GL_MAX_TESS_CONTROL_UNIFORM_BLOCKS 0x8E89 +#define GL_MAX_TESS_EVALUATION_UNIFORM_BLOCKS 0x8E8A +#define GL_MAX_TESS_CONTROL_INPUT_COMPONENTS 0x886C +#define GL_MAX_TESS_EVALUATION_INPUT_COMPONENTS 0x886D +#define GL_MAX_COMBINED_TESS_CONTROL_UNIFORM_COMPONENTS 0x8E1E +#define GL_MAX_COMBINED_TESS_EVALUATION_UNIFORM_COMPONENTS 0x8E1F +#define GL_UNIFORM_BLOCK_REFERENCED_BY_TESS_CONTROL_SHADER 0x84F0 +#define GL_UNIFORM_BLOCK_REFERENCED_BY_TESS_EVALUATION_SHADER 0x84F1 +#define GL_TESS_EVALUATION_SHADER 0x8E87 +#define GL_TESS_CONTROL_SHADER 0x8E88 +#endif + +#ifndef GL_ARB_texture_buffer_object_rgb32 +/* reuse GL_RGB32F */ +/* reuse GL_RGB32UI */ +/* reuse GL_RGB32I */ +#endif + +#ifndef GL_ARB_transform_feedback2 +#define GL_TRANSFORM_FEEDBACK 0x8E22 +#define GL_TRANSFORM_FEEDBACK_BUFFER_PAUSED 0x8E23 +#define GL_TRANSFORM_FEEDBACK_BUFFER_ACTIVE 0x8E24 +#define GL_TRANSFORM_FEEDBACK_BINDING 0x8E25 +#endif + +#ifndef GL_ARB_transform_feedback3 +#define GL_MAX_TRANSFORM_FEEDBACK_BUFFERS 0x8E70 +#define GL_MAX_VERTEX_STREAMS 0x8E71 +#endif + +#ifndef GL_ARB_ES2_compatibility +#define GL_FIXED 0x140C +#define GL_IMPLEMENTATION_COLOR_READ_TYPE 0x8B9A +#define GL_IMPLEMENTATION_COLOR_READ_FORMAT 0x8B9B +#define GL_LOW_FLOAT 0x8DF0 +#define GL_MEDIUM_FLOAT 0x8DF1 +#define GL_HIGH_FLOAT 0x8DF2 +#define GL_LOW_INT 0x8DF3 +#define GL_MEDIUM_INT 0x8DF4 +#define GL_HIGH_INT 0x8DF5 +#define GL_SHADER_COMPILER 0x8DFA +#define GL_NUM_SHADER_BINARY_FORMATS 0x8DF9 +#define GL_MAX_VERTEX_UNIFORM_VECTORS 0x8DFB +#define GL_MAX_VARYING_VECTORS 0x8DFC +#define GL_MAX_FRAGMENT_UNIFORM_VECTORS 0x8DFD +#endif + +#ifndef GL_ARB_get_program_binary +#define GL_PROGRAM_BINARY_RETRIEVABLE_HINT 0x8257 +#define GL_PROGRAM_BINARY_LENGTH 0x8741 +#define GL_NUM_PROGRAM_BINARY_FORMATS 0x87FE +#define GL_PROGRAM_BINARY_FORMATS 0x87FF +#endif + +#ifndef GL_ARB_separate_shader_objects +#define GL_VERTEX_SHADER_BIT 0x00000001 +#define GL_FRAGMENT_SHADER_BIT 0x00000002 +#define GL_GEOMETRY_SHADER_BIT 0x00000004 +#define GL_TESS_CONTROL_SHADER_BIT 0x00000008 +#define GL_TESS_EVALUATION_SHADER_BIT 0x00000010 +#define GL_ALL_SHADER_BITS 0xFFFFFFFF +#define GL_PROGRAM_SEPARABLE 0x8258 +#define GL_ACTIVE_PROGRAM 0x8259 +#define GL_PROGRAM_PIPELINE_BINDING 0x825A +#endif + +#ifndef GL_ARB_shader_precision +#endif + +#ifndef GL_ARB_vertex_attrib_64bit +/* reuse GL_RGB32I */ +/* reuse GL_DOUBLE_VEC2 */ +/* reuse GL_DOUBLE_VEC3 */ +/* reuse GL_DOUBLE_VEC4 */ +/* reuse GL_DOUBLE_MAT2 */ +/* reuse GL_DOUBLE_MAT3 */ +/* reuse GL_DOUBLE_MAT4 */ +/* reuse GL_DOUBLE_MAT2x3 */ +/* reuse GL_DOUBLE_MAT2x4 */ +/* reuse GL_DOUBLE_MAT3x2 */ +/* reuse GL_DOUBLE_MAT3x4 */ +/* reuse GL_DOUBLE_MAT4x2 */ +/* reuse GL_DOUBLE_MAT4x3 */ +#endif + +#ifndef GL_ARB_viewport_array +/* reuse GL_SCISSOR_BOX */ +/* reuse GL_VIEWPORT */ +/* reuse GL_DEPTH_RANGE */ +/* reuse GL_SCISSOR_TEST */ +#define GL_MAX_VIEWPORTS 0x825B +#define GL_VIEWPORT_SUBPIXEL_BITS 0x825C +#define GL_VIEWPORT_BOUNDS_RANGE 0x825D +#define GL_LAYER_PROVOKING_VERTEX 0x825E +#define GL_VIEWPORT_INDEX_PROVOKING_VERTEX 0x825F +#define GL_UNDEFINED_VERTEX 0x8260 +/* reuse GL_FIRST_VERTEX_CONVENTION */ +/* reuse GL_LAST_VERTEX_CONVENTION */ +/* reuse GL_PROVOKING_VERTEX */ +#endif + +#ifndef GL_ARB_cl_event +#define GL_SYNC_CL_EVENT_ARB 0x8240 +#define GL_SYNC_CL_EVENT_COMPLETE_ARB 0x8241 +#endif + +#ifndef GL_ARB_debug_output +#define GL_DEBUG_OUTPUT_SYNCHRONOUS_ARB 0x8242 +#define GL_DEBUG_NEXT_LOGGED_MESSAGE_LENGTH_ARB 0x8243 +#define GL_DEBUG_CALLBACK_FUNCTION_ARB 0x8244 +#define GL_DEBUG_CALLBACK_USER_PARAM_ARB 0x8245 +#define GL_DEBUG_SOURCE_API_ARB 0x8246 +#define GL_DEBUG_SOURCE_WINDOW_SYSTEM_ARB 0x8247 +#define GL_DEBUG_SOURCE_SHADER_COMPILER_ARB 0x8248 +#define GL_DEBUG_SOURCE_THIRD_PARTY_ARB 0x8249 +#define GL_DEBUG_SOURCE_APPLICATION_ARB 0x824A +#define GL_DEBUG_SOURCE_OTHER_ARB 0x824B +#define GL_DEBUG_TYPE_ERROR_ARB 0x824C +#define GL_DEBUG_TYPE_DEPRECATED_BEHAVIOR_ARB 0x824D +#define GL_DEBUG_TYPE_UNDEFINED_BEHAVIOR_ARB 0x824E +#define GL_DEBUG_TYPE_PORTABILITY_ARB 0x824F +#define GL_DEBUG_TYPE_PERFORMANCE_ARB 0x8250 +#define GL_DEBUG_TYPE_OTHER_ARB 0x8251 +#define GL_MAX_DEBUG_MESSAGE_LENGTH_ARB 0x9143 +#define GL_MAX_DEBUG_LOGGED_MESSAGES_ARB 0x9144 +#define GL_DEBUG_LOGGED_MESSAGES_ARB 0x9145 +#define GL_DEBUG_SEVERITY_HIGH_ARB 0x9146 +#define GL_DEBUG_SEVERITY_MEDIUM_ARB 0x9147 +#define GL_DEBUG_SEVERITY_LOW_ARB 0x9148 +#endif + +#ifndef GL_ARB_robustness +/* reuse GL_NO_ERROR */ +#define GL_CONTEXT_FLAG_ROBUST_ACCESS_BIT_ARB 0x00000004 +#define GL_LOSE_CONTEXT_ON_RESET_ARB 0x8252 +#define GL_GUILTY_CONTEXT_RESET_ARB 0x8253 +#define GL_INNOCENT_CONTEXT_RESET_ARB 0x8254 +#define GL_UNKNOWN_CONTEXT_RESET_ARB 0x8255 +#define GL_RESET_NOTIFICATION_STRATEGY_ARB 0x8256 +#define GL_NO_RESET_NOTIFICATION_ARB 0x8261 +#endif + +#ifndef GL_ARB_shader_stencil_export +#endif + +#ifndef GL_EXT_abgr +#define GL_ABGR_EXT 0x8000 +#endif + +#ifndef GL_EXT_blend_color +#define GL_CONSTANT_COLOR_EXT 0x8001 +#define GL_ONE_MINUS_CONSTANT_COLOR_EXT 0x8002 +#define GL_CONSTANT_ALPHA_EXT 0x8003 +#define GL_ONE_MINUS_CONSTANT_ALPHA_EXT 0x8004 +#define GL_BLEND_COLOR_EXT 0x8005 +#endif + +#ifndef GL_EXT_polygon_offset +#define GL_POLYGON_OFFSET_EXT 0x8037 +#define GL_POLYGON_OFFSET_FACTOR_EXT 0x8038 +#define GL_POLYGON_OFFSET_BIAS_EXT 0x8039 +#endif + +#ifndef GL_EXT_texture +#define GL_ALPHA4_EXT 0x803B +#define GL_ALPHA8_EXT 0x803C +#define GL_ALPHA12_EXT 0x803D +#define GL_ALPHA16_EXT 0x803E +#define GL_LUMINANCE4_EXT 0x803F +#define GL_LUMINANCE8_EXT 0x8040 +#define GL_LUMINANCE12_EXT 0x8041 +#define GL_LUMINANCE16_EXT 0x8042 +#define GL_LUMINANCE4_ALPHA4_EXT 0x8043 +#define GL_LUMINANCE6_ALPHA2_EXT 0x8044 +#define GL_LUMINANCE8_ALPHA8_EXT 0x8045 +#define GL_LUMINANCE12_ALPHA4_EXT 0x8046 +#define GL_LUMINANCE12_ALPHA12_EXT 0x8047 +#define GL_LUMINANCE16_ALPHA16_EXT 0x8048 +#define GL_INTENSITY_EXT 0x8049 +#define GL_INTENSITY4_EXT 0x804A +#define GL_INTENSITY8_EXT 0x804B +#define GL_INTENSITY12_EXT 0x804C +#define GL_INTENSITY16_EXT 0x804D +#define GL_RGB2_EXT 0x804E +#define GL_RGB4_EXT 0x804F +#define GL_RGB5_EXT 0x8050 +#define GL_RGB8_EXT 0x8051 +#define GL_RGB10_EXT 0x8052 +#define GL_RGB12_EXT 0x8053 +#define GL_RGB16_EXT 0x8054 +#define GL_RGBA2_EXT 0x8055 +#define GL_RGBA4_EXT 0x8056 +#define GL_RGB5_A1_EXT 0x8057 +#define GL_RGBA8_EXT 0x8058 +#define GL_RGB10_A2_EXT 0x8059 +#define GL_RGBA12_EXT 0x805A +#define GL_RGBA16_EXT 0x805B +#define GL_TEXTURE_RED_SIZE_EXT 0x805C +#define GL_TEXTURE_GREEN_SIZE_EXT 0x805D +#define GL_TEXTURE_BLUE_SIZE_EXT 0x805E +#define GL_TEXTURE_ALPHA_SIZE_EXT 0x805F +#define GL_TEXTURE_LUMINANCE_SIZE_EXT 0x8060 +#define GL_TEXTURE_INTENSITY_SIZE_EXT 0x8061 +#define GL_REPLACE_EXT 0x8062 +#define GL_PROXY_TEXTURE_1D_EXT 0x8063 +#define GL_PROXY_TEXTURE_2D_EXT 0x8064 +#define GL_TEXTURE_TOO_LARGE_EXT 0x8065 +#endif + +#ifndef GL_EXT_texture3D +#define GL_PACK_SKIP_IMAGES_EXT 0x806B +#define GL_PACK_IMAGE_HEIGHT_EXT 0x806C +#define GL_UNPACK_SKIP_IMAGES_EXT 0x806D +#define GL_UNPACK_IMAGE_HEIGHT_EXT 0x806E +#define GL_TEXTURE_3D_EXT 0x806F +#define GL_PROXY_TEXTURE_3D_EXT 0x8070 +#define GL_TEXTURE_DEPTH_EXT 0x8071 +#define GL_TEXTURE_WRAP_R_EXT 0x8072 +#define GL_MAX_3D_TEXTURE_SIZE_EXT 0x8073 +#endif + +#ifndef GL_SGIS_texture_filter4 +#define GL_FILTER4_SGIS 0x8146 +#define GL_TEXTURE_FILTER4_SIZE_SGIS 0x8147 +#endif + +#ifndef GL_EXT_subtexture +#endif + +#ifndef GL_EXT_copy_texture +#endif + +#ifndef GL_EXT_histogram +#define GL_HISTOGRAM_EXT 0x8024 +#define GL_PROXY_HISTOGRAM_EXT 0x8025 +#define GL_HISTOGRAM_WIDTH_EXT 0x8026 +#define GL_HISTOGRAM_FORMAT_EXT 0x8027 +#define GL_HISTOGRAM_RED_SIZE_EXT 0x8028 +#define GL_HISTOGRAM_GREEN_SIZE_EXT 0x8029 +#define GL_HISTOGRAM_BLUE_SIZE_EXT 0x802A +#define GL_HISTOGRAM_ALPHA_SIZE_EXT 0x802B +#define GL_HISTOGRAM_LUMINANCE_SIZE_EXT 0x802C +#define GL_HISTOGRAM_SINK_EXT 0x802D +#define GL_MINMAX_EXT 0x802E +#define GL_MINMAX_FORMAT_EXT 0x802F +#define GL_MINMAX_SINK_EXT 0x8030 +#define GL_TABLE_TOO_LARGE_EXT 0x8031 +#endif + +#ifndef GL_EXT_convolution +#define GL_CONVOLUTION_1D_EXT 0x8010 +#define GL_CONVOLUTION_2D_EXT 0x8011 +#define GL_SEPARABLE_2D_EXT 0x8012 +#define GL_CONVOLUTION_BORDER_MODE_EXT 0x8013 +#define GL_CONVOLUTION_FILTER_SCALE_EXT 0x8014 +#define GL_CONVOLUTION_FILTER_BIAS_EXT 0x8015 +#define GL_REDUCE_EXT 0x8016 +#define GL_CONVOLUTION_FORMAT_EXT 0x8017 +#define GL_CONVOLUTION_WIDTH_EXT 0x8018 +#define GL_CONVOLUTION_HEIGHT_EXT 0x8019 +#define GL_MAX_CONVOLUTION_WIDTH_EXT 0x801A +#define GL_MAX_CONVOLUTION_HEIGHT_EXT 0x801B +#define GL_POST_CONVOLUTION_RED_SCALE_EXT 0x801C +#define GL_POST_CONVOLUTION_GREEN_SCALE_EXT 0x801D +#define GL_POST_CONVOLUTION_BLUE_SCALE_EXT 0x801E +#define GL_POST_CONVOLUTION_ALPHA_SCALE_EXT 0x801F +#define GL_POST_CONVOLUTION_RED_BIAS_EXT 0x8020 +#define GL_POST_CONVOLUTION_GREEN_BIAS_EXT 0x8021 +#define GL_POST_CONVOLUTION_BLUE_BIAS_EXT 0x8022 +#define GL_POST_CONVOLUTION_ALPHA_BIAS_EXT 0x8023 +#endif + +#ifndef GL_SGI_color_matrix +#define GL_COLOR_MATRIX_SGI 0x80B1 +#define GL_COLOR_MATRIX_STACK_DEPTH_SGI 0x80B2 +#define GL_MAX_COLOR_MATRIX_STACK_DEPTH_SGI 0x80B3 +#define GL_POST_COLOR_MATRIX_RED_SCALE_SGI 0x80B4 +#define GL_POST_COLOR_MATRIX_GREEN_SCALE_SGI 0x80B5 +#define GL_POST_COLOR_MATRIX_BLUE_SCALE_SGI 0x80B6 +#define GL_POST_COLOR_MATRIX_ALPHA_SCALE_SGI 0x80B7 +#define GL_POST_COLOR_MATRIX_RED_BIAS_SGI 0x80B8 +#define GL_POST_COLOR_MATRIX_GREEN_BIAS_SGI 0x80B9 +#define GL_POST_COLOR_MATRIX_BLUE_BIAS_SGI 0x80BA +#define GL_POST_COLOR_MATRIX_ALPHA_BIAS_SGI 0x80BB +#endif + +#ifndef GL_SGI_color_table +#define GL_COLOR_TABLE_SGI 0x80D0 +#define GL_POST_CONVOLUTION_COLOR_TABLE_SGI 0x80D1 +#define GL_POST_COLOR_MATRIX_COLOR_TABLE_SGI 0x80D2 +#define GL_PROXY_COLOR_TABLE_SGI 0x80D3 +#define GL_PROXY_POST_CONVOLUTION_COLOR_TABLE_SGI 0x80D4 +#define GL_PROXY_POST_COLOR_MATRIX_COLOR_TABLE_SGI 0x80D5 +#define GL_COLOR_TABLE_SCALE_SGI 0x80D6 +#define GL_COLOR_TABLE_BIAS_SGI 0x80D7 +#define GL_COLOR_TABLE_FORMAT_SGI 0x80D8 +#define GL_COLOR_TABLE_WIDTH_SGI 0x80D9 +#define GL_COLOR_TABLE_RED_SIZE_SGI 0x80DA +#define GL_COLOR_TABLE_GREEN_SIZE_SGI 0x80DB +#define GL_COLOR_TABLE_BLUE_SIZE_SGI 0x80DC +#define GL_COLOR_TABLE_ALPHA_SIZE_SGI 0x80DD +#define GL_COLOR_TABLE_LUMINANCE_SIZE_SGI 0x80DE +#define GL_COLOR_TABLE_INTENSITY_SIZE_SGI 0x80DF +#endif + +#ifndef GL_SGIS_pixel_texture +#define GL_PIXEL_TEXTURE_SGIS 0x8353 +#define GL_PIXEL_FRAGMENT_RGB_SOURCE_SGIS 0x8354 +#define GL_PIXEL_FRAGMENT_ALPHA_SOURCE_SGIS 0x8355 +#define GL_PIXEL_GROUP_COLOR_SGIS 0x8356 +#endif + +#ifndef GL_SGIX_pixel_texture +#define GL_PIXEL_TEX_GEN_SGIX 0x8139 +#define GL_PIXEL_TEX_GEN_MODE_SGIX 0x832B +#endif + +#ifndef GL_SGIS_texture4D +#define GL_PACK_SKIP_VOLUMES_SGIS 0x8130 +#define GL_PACK_IMAGE_DEPTH_SGIS 0x8131 +#define GL_UNPACK_SKIP_VOLUMES_SGIS 0x8132 +#define GL_UNPACK_IMAGE_DEPTH_SGIS 0x8133 +#define GL_TEXTURE_4D_SGIS 0x8134 +#define GL_PROXY_TEXTURE_4D_SGIS 0x8135 +#define GL_TEXTURE_4DSIZE_SGIS 0x8136 +#define GL_TEXTURE_WRAP_Q_SGIS 0x8137 +#define GL_MAX_4D_TEXTURE_SIZE_SGIS 0x8138 +#define GL_TEXTURE_4D_BINDING_SGIS 0x814F +#endif + +#ifndef GL_SGI_texture_color_table +#define GL_TEXTURE_COLOR_TABLE_SGI 0x80BC +#define GL_PROXY_TEXTURE_COLOR_TABLE_SGI 0x80BD +#endif + +#ifndef GL_EXT_cmyka +#define GL_CMYK_EXT 0x800C +#define GL_CMYKA_EXT 0x800D +#define GL_PACK_CMYK_HINT_EXT 0x800E +#define GL_UNPACK_CMYK_HINT_EXT 0x800F +#endif + +#ifndef GL_EXT_texture_object +#define GL_TEXTURE_PRIORITY_EXT 0x8066 +#define GL_TEXTURE_RESIDENT_EXT 0x8067 +#define GL_TEXTURE_1D_BINDING_EXT 0x8068 +#define GL_TEXTURE_2D_BINDING_EXT 0x8069 +#define GL_TEXTURE_3D_BINDING_EXT 0x806A +#endif + +#ifndef GL_SGIS_detail_texture +#define GL_DETAIL_TEXTURE_2D_SGIS 0x8095 +#define GL_DETAIL_TEXTURE_2D_BINDING_SGIS 0x8096 +#define GL_LINEAR_DETAIL_SGIS 0x8097 +#define GL_LINEAR_DETAIL_ALPHA_SGIS 0x8098 +#define GL_LINEAR_DETAIL_COLOR_SGIS 0x8099 +#define GL_DETAIL_TEXTURE_LEVEL_SGIS 0x809A +#define GL_DETAIL_TEXTURE_MODE_SGIS 0x809B +#define GL_DETAIL_TEXTURE_FUNC_POINTS_SGIS 0x809C +#endif + +#ifndef GL_SGIS_sharpen_texture +#define GL_LINEAR_SHARPEN_SGIS 0x80AD +#define GL_LINEAR_SHARPEN_ALPHA_SGIS 0x80AE +#define GL_LINEAR_SHARPEN_COLOR_SGIS 0x80AF +#define GL_SHARPEN_TEXTURE_FUNC_POINTS_SGIS 0x80B0 +#endif + +#ifndef GL_EXT_packed_pixels +#define GL_UNSIGNED_BYTE_3_3_2_EXT 0x8032 +#define GL_UNSIGNED_SHORT_4_4_4_4_EXT 0x8033 +#define GL_UNSIGNED_SHORT_5_5_5_1_EXT 0x8034 +#define GL_UNSIGNED_INT_8_8_8_8_EXT 0x8035 +#define GL_UNSIGNED_INT_10_10_10_2_EXT 0x8036 +#endif + +#ifndef GL_SGIS_texture_lod +#define GL_TEXTURE_MIN_LOD_SGIS 0x813A +#define GL_TEXTURE_MAX_LOD_SGIS 0x813B +#define GL_TEXTURE_BASE_LEVEL_SGIS 0x813C +#define GL_TEXTURE_MAX_LEVEL_SGIS 0x813D +#endif + +#ifndef GL_SGIS_multisample +#define GL_MULTISAMPLE_SGIS 0x809D +#define GL_SAMPLE_ALPHA_TO_MASK_SGIS 0x809E +#define GL_SAMPLE_ALPHA_TO_ONE_SGIS 0x809F +#define GL_SAMPLE_MASK_SGIS 0x80A0 +#define GL_1PASS_SGIS 0x80A1 +#define GL_2PASS_0_SGIS 0x80A2 +#define GL_2PASS_1_SGIS 0x80A3 +#define GL_4PASS_0_SGIS 0x80A4 +#define GL_4PASS_1_SGIS 0x80A5 +#define GL_4PASS_2_SGIS 0x80A6 +#define GL_4PASS_3_SGIS 0x80A7 +#define GL_SAMPLE_BUFFERS_SGIS 0x80A8 +#define GL_SAMPLES_SGIS 0x80A9 +#define GL_SAMPLE_MASK_VALUE_SGIS 0x80AA +#define GL_SAMPLE_MASK_INVERT_SGIS 0x80AB +#define GL_SAMPLE_PATTERN_SGIS 0x80AC +#endif + +#ifndef GL_EXT_rescale_normal +#define GL_RESCALE_NORMAL_EXT 0x803A +#endif + +#ifndef GL_EXT_vertex_array +#define GL_VERTEX_ARRAY_EXT 0x8074 +#define GL_NORMAL_ARRAY_EXT 0x8075 +#define GL_COLOR_ARRAY_EXT 0x8076 +#define GL_INDEX_ARRAY_EXT 0x8077 +#define GL_TEXTURE_COORD_ARRAY_EXT 0x8078 +#define GL_EDGE_FLAG_ARRAY_EXT 0x8079 +#define GL_VERTEX_ARRAY_SIZE_EXT 0x807A +#define GL_VERTEX_ARRAY_TYPE_EXT 0x807B +#define GL_VERTEX_ARRAY_STRIDE_EXT 0x807C +#define GL_VERTEX_ARRAY_COUNT_EXT 0x807D +#define GL_NORMAL_ARRAY_TYPE_EXT 0x807E +#define GL_NORMAL_ARRAY_STRIDE_EXT 0x807F +#define GL_NORMAL_ARRAY_COUNT_EXT 0x8080 +#define GL_COLOR_ARRAY_SIZE_EXT 0x8081 +#define GL_COLOR_ARRAY_TYPE_EXT 0x8082 +#define GL_COLOR_ARRAY_STRIDE_EXT 0x8083 +#define GL_COLOR_ARRAY_COUNT_EXT 0x8084 +#define GL_INDEX_ARRAY_TYPE_EXT 0x8085 +#define GL_INDEX_ARRAY_STRIDE_EXT 0x8086 +#define GL_INDEX_ARRAY_COUNT_EXT 0x8087 +#define GL_TEXTURE_COORD_ARRAY_SIZE_EXT 0x8088 +#define GL_TEXTURE_COORD_ARRAY_TYPE_EXT 0x8089 +#define GL_TEXTURE_COORD_ARRAY_STRIDE_EXT 0x808A +#define GL_TEXTURE_COORD_ARRAY_COUNT_EXT 0x808B +#define GL_EDGE_FLAG_ARRAY_STRIDE_EXT 0x808C +#define GL_EDGE_FLAG_ARRAY_COUNT_EXT 0x808D +#define GL_VERTEX_ARRAY_POINTER_EXT 0x808E +#define GL_NORMAL_ARRAY_POINTER_EXT 0x808F +#define GL_COLOR_ARRAY_POINTER_EXT 0x8090 +#define GL_INDEX_ARRAY_POINTER_EXT 0x8091 +#define GL_TEXTURE_COORD_ARRAY_POINTER_EXT 0x8092 +#define GL_EDGE_FLAG_ARRAY_POINTER_EXT 0x8093 +#endif + +#ifndef GL_EXT_misc_attribute +#endif + +#ifndef GL_SGIS_generate_mipmap +#define GL_GENERATE_MIPMAP_SGIS 0x8191 +#define GL_GENERATE_MIPMAP_HINT_SGIS 0x8192 +#endif + +#ifndef GL_SGIX_clipmap +#define GL_LINEAR_CLIPMAP_LINEAR_SGIX 0x8170 +#define GL_TEXTURE_CLIPMAP_CENTER_SGIX 0x8171 +#define GL_TEXTURE_CLIPMAP_FRAME_SGIX 0x8172 +#define GL_TEXTURE_CLIPMAP_OFFSET_SGIX 0x8173 +#define GL_TEXTURE_CLIPMAP_VIRTUAL_DEPTH_SGIX 0x8174 +#define GL_TEXTURE_CLIPMAP_LOD_OFFSET_SGIX 0x8175 +#define GL_TEXTURE_CLIPMAP_DEPTH_SGIX 0x8176 +#define GL_MAX_CLIPMAP_DEPTH_SGIX 0x8177 +#define GL_MAX_CLIPMAP_VIRTUAL_DEPTH_SGIX 0x8178 +#define GL_NEAREST_CLIPMAP_NEAREST_SGIX 0x844D +#define GL_NEAREST_CLIPMAP_LINEAR_SGIX 0x844E +#define GL_LINEAR_CLIPMAP_NEAREST_SGIX 0x844F +#endif + +#ifndef GL_SGIX_shadow +#define GL_TEXTURE_COMPARE_SGIX 0x819A +#define GL_TEXTURE_COMPARE_OPERATOR_SGIX 0x819B +#define GL_TEXTURE_LEQUAL_R_SGIX 0x819C +#define GL_TEXTURE_GEQUAL_R_SGIX 0x819D +#endif + +#ifndef GL_SGIS_texture_edge_clamp +#define GL_CLAMP_TO_EDGE_SGIS 0x812F +#endif + +#ifndef GL_SGIS_texture_border_clamp +#define GL_CLAMP_TO_BORDER_SGIS 0x812D +#endif + +#ifndef GL_EXT_blend_minmax +#define GL_FUNC_ADD_EXT 0x8006 +#define GL_MIN_EXT 0x8007 +#define GL_MAX_EXT 0x8008 +#define GL_BLEND_EQUATION_EXT 0x8009 +#endif + +#ifndef GL_EXT_blend_subtract +#define GL_FUNC_SUBTRACT_EXT 0x800A +#define GL_FUNC_REVERSE_SUBTRACT_EXT 0x800B +#endif + +#ifndef GL_EXT_blend_logic_op +#endif + +#ifndef GL_SGIX_interlace +#define GL_INTERLACE_SGIX 0x8094 +#endif + +#ifndef GL_SGIX_pixel_tiles +#define GL_PIXEL_TILE_BEST_ALIGNMENT_SGIX 0x813E +#define GL_PIXEL_TILE_CACHE_INCREMENT_SGIX 0x813F +#define GL_PIXEL_TILE_WIDTH_SGIX 0x8140 +#define GL_PIXEL_TILE_HEIGHT_SGIX 0x8141 +#define GL_PIXEL_TILE_GRID_WIDTH_SGIX 0x8142 +#define GL_PIXEL_TILE_GRID_HEIGHT_SGIX 0x8143 +#define GL_PIXEL_TILE_GRID_DEPTH_SGIX 0x8144 +#define GL_PIXEL_TILE_CACHE_SIZE_SGIX 0x8145 +#endif + +#ifndef GL_SGIS_texture_select +#define GL_DUAL_ALPHA4_SGIS 0x8110 +#define GL_DUAL_ALPHA8_SGIS 0x8111 +#define GL_DUAL_ALPHA12_SGIS 0x8112 +#define GL_DUAL_ALPHA16_SGIS 0x8113 +#define GL_DUAL_LUMINANCE4_SGIS 0x8114 +#define GL_DUAL_LUMINANCE8_SGIS 0x8115 +#define GL_DUAL_LUMINANCE12_SGIS 0x8116 +#define GL_DUAL_LUMINANCE16_SGIS 0x8117 +#define GL_DUAL_INTENSITY4_SGIS 0x8118 +#define GL_DUAL_INTENSITY8_SGIS 0x8119 +#define GL_DUAL_INTENSITY12_SGIS 0x811A +#define GL_DUAL_INTENSITY16_SGIS 0x811B +#define GL_DUAL_LUMINANCE_ALPHA4_SGIS 0x811C +#define GL_DUAL_LUMINANCE_ALPHA8_SGIS 0x811D +#define GL_QUAD_ALPHA4_SGIS 0x811E +#define GL_QUAD_ALPHA8_SGIS 0x811F +#define GL_QUAD_LUMINANCE4_SGIS 0x8120 +#define GL_QUAD_LUMINANCE8_SGIS 0x8121 +#define GL_QUAD_INTENSITY4_SGIS 0x8122 +#define GL_QUAD_INTENSITY8_SGIS 0x8123 +#define GL_DUAL_TEXTURE_SELECT_SGIS 0x8124 +#define GL_QUAD_TEXTURE_SELECT_SGIS 0x8125 +#endif + +#ifndef GL_SGIX_sprite +#define GL_SPRITE_SGIX 0x8148 +#define GL_SPRITE_MODE_SGIX 0x8149 +#define GL_SPRITE_AXIS_SGIX 0x814A +#define GL_SPRITE_TRANSLATION_SGIX 0x814B +#define GL_SPRITE_AXIAL_SGIX 0x814C +#define GL_SPRITE_OBJECT_ALIGNED_SGIX 0x814D +#define GL_SPRITE_EYE_ALIGNED_SGIX 0x814E +#endif + +#ifndef GL_SGIX_texture_multi_buffer +#define GL_TEXTURE_MULTI_BUFFER_HINT_SGIX 0x812E +#endif + +#ifndef GL_EXT_point_parameters +#define GL_POINT_SIZE_MIN_EXT 0x8126 +#define GL_POINT_SIZE_MAX_EXT 0x8127 +#define GL_POINT_FADE_THRESHOLD_SIZE_EXT 0x8128 +#define GL_DISTANCE_ATTENUATION_EXT 0x8129 +#endif + +#ifndef GL_SGIS_point_parameters +#define GL_POINT_SIZE_MIN_SGIS 0x8126 +#define GL_POINT_SIZE_MAX_SGIS 0x8127 +#define GL_POINT_FADE_THRESHOLD_SIZE_SGIS 0x8128 +#define GL_DISTANCE_ATTENUATION_SGIS 0x8129 +#endif + +#ifndef GL_SGIX_instruments +#define GL_INSTRUMENT_BUFFER_POINTER_SGIX 0x8180 +#define GL_INSTRUMENT_MEASUREMENTS_SGIX 0x8181 +#endif + +#ifndef GL_SGIX_texture_scale_bias +#define GL_POST_TEXTURE_FILTER_BIAS_SGIX 0x8179 +#define GL_POST_TEXTURE_FILTER_SCALE_SGIX 0x817A +#define GL_POST_TEXTURE_FILTER_BIAS_RANGE_SGIX 0x817B +#define GL_POST_TEXTURE_FILTER_SCALE_RANGE_SGIX 0x817C +#endif + +#ifndef GL_SGIX_framezoom +#define GL_FRAMEZOOM_SGIX 0x818B +#define GL_FRAMEZOOM_FACTOR_SGIX 0x818C +#define GL_MAX_FRAMEZOOM_FACTOR_SGIX 0x818D +#endif + +#ifndef GL_SGIX_tag_sample_buffer +#endif + +#ifndef GL_FfdMaskSGIX +#define GL_TEXTURE_DEFORMATION_BIT_SGIX 0x00000001 +#define GL_GEOMETRY_DEFORMATION_BIT_SGIX 0x00000002 +#endif + +#ifndef GL_SGIX_polynomial_ffd +#define GL_GEOMETRY_DEFORMATION_SGIX 0x8194 +#define GL_TEXTURE_DEFORMATION_SGIX 0x8195 +#define GL_DEFORMATIONS_MASK_SGIX 0x8196 +#define GL_MAX_DEFORMATION_ORDER_SGIX 0x8197 +#endif + +#ifndef GL_SGIX_reference_plane +#define GL_REFERENCE_PLANE_SGIX 0x817D +#define GL_REFERENCE_PLANE_EQUATION_SGIX 0x817E +#endif + +#ifndef GL_SGIX_flush_raster +#endif + +#ifndef GL_SGIX_depth_texture +#define GL_DEPTH_COMPONENT16_SGIX 0x81A5 +#define GL_DEPTH_COMPONENT24_SGIX 0x81A6 +#define GL_DEPTH_COMPONENT32_SGIX 0x81A7 +#endif + +#ifndef GL_SGIS_fog_function +#define GL_FOG_FUNC_SGIS 0x812A +#define GL_FOG_FUNC_POINTS_SGIS 0x812B +#define GL_MAX_FOG_FUNC_POINTS_SGIS 0x812C +#endif + +#ifndef GL_SGIX_fog_offset +#define GL_FOG_OFFSET_SGIX 0x8198 +#define GL_FOG_OFFSET_VALUE_SGIX 0x8199 +#endif + +#ifndef GL_HP_image_transform +#define GL_IMAGE_SCALE_X_HP 0x8155 +#define GL_IMAGE_SCALE_Y_HP 0x8156 +#define GL_IMAGE_TRANSLATE_X_HP 0x8157 +#define GL_IMAGE_TRANSLATE_Y_HP 0x8158 +#define GL_IMAGE_ROTATE_ANGLE_HP 0x8159 +#define GL_IMAGE_ROTATE_ORIGIN_X_HP 0x815A +#define GL_IMAGE_ROTATE_ORIGIN_Y_HP 0x815B +#define GL_IMAGE_MAG_FILTER_HP 0x815C +#define GL_IMAGE_MIN_FILTER_HP 0x815D +#define GL_IMAGE_CUBIC_WEIGHT_HP 0x815E +#define GL_CUBIC_HP 0x815F +#define GL_AVERAGE_HP 0x8160 +#define GL_IMAGE_TRANSFORM_2D_HP 0x8161 +#define GL_POST_IMAGE_TRANSFORM_COLOR_TABLE_HP 0x8162 +#define GL_PROXY_POST_IMAGE_TRANSFORM_COLOR_TABLE_HP 0x8163 +#endif + +#ifndef GL_HP_convolution_border_modes +#define GL_IGNORE_BORDER_HP 0x8150 +#define GL_CONSTANT_BORDER_HP 0x8151 +#define GL_REPLICATE_BORDER_HP 0x8153 +#define GL_CONVOLUTION_BORDER_COLOR_HP 0x8154 +#endif + +#ifndef GL_INGR_palette_buffer +#endif + +#ifndef GL_SGIX_texture_add_env +#define GL_TEXTURE_ENV_BIAS_SGIX 0x80BE +#endif + +#ifndef GL_EXT_color_subtable +#endif + +#ifndef GL_PGI_vertex_hints +#define GL_VERTEX_DATA_HINT_PGI 0x1A22A +#define GL_VERTEX_CONSISTENT_HINT_PGI 0x1A22B +#define GL_MATERIAL_SIDE_HINT_PGI 0x1A22C +#define GL_MAX_VERTEX_HINT_PGI 0x1A22D +#define GL_COLOR3_BIT_PGI 0x00010000 +#define GL_COLOR4_BIT_PGI 0x00020000 +#define GL_EDGEFLAG_BIT_PGI 0x00040000 +#define GL_INDEX_BIT_PGI 0x00080000 +#define GL_MAT_AMBIENT_BIT_PGI 0x00100000 +#define GL_MAT_AMBIENT_AND_DIFFUSE_BIT_PGI 0x00200000 +#define GL_MAT_DIFFUSE_BIT_PGI 0x00400000 +#define GL_MAT_EMISSION_BIT_PGI 0x00800000 +#define GL_MAT_COLOR_INDEXES_BIT_PGI 0x01000000 +#define GL_MAT_SHININESS_BIT_PGI 0x02000000 +#define GL_MAT_SPECULAR_BIT_PGI 0x04000000 +#define GL_NORMAL_BIT_PGI 0x08000000 +#define GL_TEXCOORD1_BIT_PGI 0x10000000 +#define GL_TEXCOORD2_BIT_PGI 0x20000000 +#define GL_TEXCOORD3_BIT_PGI 0x40000000 +#define GL_TEXCOORD4_BIT_PGI 0x80000000 +#define GL_VERTEX23_BIT_PGI 0x00000004 +#define GL_VERTEX4_BIT_PGI 0x00000008 +#endif + +#ifndef GL_PGI_misc_hints +#define GL_PREFER_DOUBLEBUFFER_HINT_PGI 0x1A1F8 +#define GL_CONSERVE_MEMORY_HINT_PGI 0x1A1FD +#define GL_RECLAIM_MEMORY_HINT_PGI 0x1A1FE +#define GL_NATIVE_GRAPHICS_HANDLE_PGI 0x1A202 +#define GL_NATIVE_GRAPHICS_BEGIN_HINT_PGI 0x1A203 +#define GL_NATIVE_GRAPHICS_END_HINT_PGI 0x1A204 +#define GL_ALWAYS_FAST_HINT_PGI 0x1A20C +#define GL_ALWAYS_SOFT_HINT_PGI 0x1A20D +#define GL_ALLOW_DRAW_OBJ_HINT_PGI 0x1A20E +#define GL_ALLOW_DRAW_WIN_HINT_PGI 0x1A20F +#define GL_ALLOW_DRAW_FRG_HINT_PGI 0x1A210 +#define GL_ALLOW_DRAW_MEM_HINT_PGI 0x1A211 +#define GL_STRICT_DEPTHFUNC_HINT_PGI 0x1A216 +#define GL_STRICT_LIGHTING_HINT_PGI 0x1A217 +#define GL_STRICT_SCISSOR_HINT_PGI 0x1A218 +#define GL_FULL_STIPPLE_HINT_PGI 0x1A219 +#define GL_CLIP_NEAR_HINT_PGI 0x1A220 +#define GL_CLIP_FAR_HINT_PGI 0x1A221 +#define GL_WIDE_LINE_HINT_PGI 0x1A222 +#define GL_BACK_NORMALS_HINT_PGI 0x1A223 +#endif + +#ifndef GL_EXT_paletted_texture +#define GL_COLOR_INDEX1_EXT 0x80E2 +#define GL_COLOR_INDEX2_EXT 0x80E3 +#define GL_COLOR_INDEX4_EXT 0x80E4 +#define GL_COLOR_INDEX8_EXT 0x80E5 +#define GL_COLOR_INDEX12_EXT 0x80E6 +#define GL_COLOR_INDEX16_EXT 0x80E7 +#define GL_TEXTURE_INDEX_SIZE_EXT 0x80ED +#endif + +#ifndef GL_EXT_clip_volume_hint +#define GL_CLIP_VOLUME_CLIPPING_HINT_EXT 0x80F0 +#endif + +#ifndef GL_SGIX_list_priority +#define GL_LIST_PRIORITY_SGIX 0x8182 +#endif + +#ifndef GL_SGIX_ir_instrument1 +#define GL_IR_INSTRUMENT1_SGIX 0x817F +#endif + +#ifndef GL_SGIX_calligraphic_fragment +#define GL_CALLIGRAPHIC_FRAGMENT_SGIX 0x8183 +#endif + +#ifndef GL_SGIX_texture_lod_bias +#define GL_TEXTURE_LOD_BIAS_S_SGIX 0x818E +#define GL_TEXTURE_LOD_BIAS_T_SGIX 0x818F +#define GL_TEXTURE_LOD_BIAS_R_SGIX 0x8190 +#endif + +#ifndef GL_SGIX_shadow_ambient +#define GL_SHADOW_AMBIENT_SGIX 0x80BF +#endif + +#ifndef GL_EXT_index_texture +#endif + +#ifndef GL_EXT_index_material +#define GL_INDEX_MATERIAL_EXT 0x81B8 +#define GL_INDEX_MATERIAL_PARAMETER_EXT 0x81B9 +#define GL_INDEX_MATERIAL_FACE_EXT 0x81BA +#endif + +#ifndef GL_EXT_index_func +#define GL_INDEX_TEST_EXT 0x81B5 +#define GL_INDEX_TEST_FUNC_EXT 0x81B6 +#define GL_INDEX_TEST_REF_EXT 0x81B7 +#endif + +#ifndef GL_EXT_index_array_formats +#define GL_IUI_V2F_EXT 0x81AD +#define GL_IUI_V3F_EXT 0x81AE +#define GL_IUI_N3F_V2F_EXT 0x81AF +#define GL_IUI_N3F_V3F_EXT 0x81B0 +#define GL_T2F_IUI_V2F_EXT 0x81B1 +#define GL_T2F_IUI_V3F_EXT 0x81B2 +#define GL_T2F_IUI_N3F_V2F_EXT 0x81B3 +#define GL_T2F_IUI_N3F_V3F_EXT 0x81B4 +#endif + +#ifndef GL_EXT_compiled_vertex_array +#define GL_ARRAY_ELEMENT_LOCK_FIRST_EXT 0x81A8 +#define GL_ARRAY_ELEMENT_LOCK_COUNT_EXT 0x81A9 +#endif + +#ifndef GL_EXT_cull_vertex +#define GL_CULL_VERTEX_EXT 0x81AA +#define GL_CULL_VERTEX_EYE_POSITION_EXT 0x81AB +#define GL_CULL_VERTEX_OBJECT_POSITION_EXT 0x81AC +#endif + +#ifndef GL_SGIX_ycrcb +#define GL_YCRCB_422_SGIX 0x81BB +#define GL_YCRCB_444_SGIX 0x81BC +#endif + +#ifndef GL_SGIX_fragment_lighting +#define GL_FRAGMENT_LIGHTING_SGIX 0x8400 +#define GL_FRAGMENT_COLOR_MATERIAL_SGIX 0x8401 +#define GL_FRAGMENT_COLOR_MATERIAL_FACE_SGIX 0x8402 +#define GL_FRAGMENT_COLOR_MATERIAL_PARAMETER_SGIX 0x8403 +#define GL_MAX_FRAGMENT_LIGHTS_SGIX 0x8404 +#define GL_MAX_ACTIVE_LIGHTS_SGIX 0x8405 +#define GL_CURRENT_RASTER_NORMAL_SGIX 0x8406 +#define GL_LIGHT_ENV_MODE_SGIX 0x8407 +#define GL_FRAGMENT_LIGHT_MODEL_LOCAL_VIEWER_SGIX 0x8408 +#define GL_FRAGMENT_LIGHT_MODEL_TWO_SIDE_SGIX 0x8409 +#define GL_FRAGMENT_LIGHT_MODEL_AMBIENT_SGIX 0x840A +#define GL_FRAGMENT_LIGHT_MODEL_NORMAL_INTERPOLATION_SGIX 0x840B +#define GL_FRAGMENT_LIGHT0_SGIX 0x840C +#define GL_FRAGMENT_LIGHT1_SGIX 0x840D +#define GL_FRAGMENT_LIGHT2_SGIX 0x840E +#define GL_FRAGMENT_LIGHT3_SGIX 0x840F +#define GL_FRAGMENT_LIGHT4_SGIX 0x8410 +#define GL_FRAGMENT_LIGHT5_SGIX 0x8411 +#define GL_FRAGMENT_LIGHT6_SGIX 0x8412 +#define GL_FRAGMENT_LIGHT7_SGIX 0x8413 +#endif + +#ifndef GL_IBM_rasterpos_clip +#define GL_RASTER_POSITION_UNCLIPPED_IBM 0x19262 +#endif + +#ifndef GL_HP_texture_lighting +#define GL_TEXTURE_LIGHTING_MODE_HP 0x8167 +#define GL_TEXTURE_POST_SPECULAR_HP 0x8168 +#define GL_TEXTURE_PRE_SPECULAR_HP 0x8169 +#endif + +#ifndef GL_EXT_draw_range_elements +#define GL_MAX_ELEMENTS_VERTICES_EXT 0x80E8 +#define GL_MAX_ELEMENTS_INDICES_EXT 0x80E9 +#endif + +#ifndef GL_WIN_phong_shading +#define GL_PHONG_WIN 0x80EA +#define GL_PHONG_HINT_WIN 0x80EB +#endif + +#ifndef GL_WIN_specular_fog +#define GL_FOG_SPECULAR_TEXTURE_WIN 0x80EC +#endif + +#ifndef GL_EXT_light_texture +#define GL_FRAGMENT_MATERIAL_EXT 0x8349 +#define GL_FRAGMENT_NORMAL_EXT 0x834A +#define GL_FRAGMENT_COLOR_EXT 0x834C +#define GL_ATTENUATION_EXT 0x834D +#define GL_SHADOW_ATTENUATION_EXT 0x834E +#define GL_TEXTURE_APPLICATION_MODE_EXT 0x834F +#define GL_TEXTURE_LIGHT_EXT 0x8350 +#define GL_TEXTURE_MATERIAL_FACE_EXT 0x8351 +#define GL_TEXTURE_MATERIAL_PARAMETER_EXT 0x8352 +/* reuse GL_FRAGMENT_DEPTH_EXT */ +#endif + +#ifndef GL_SGIX_blend_alpha_minmax +#define GL_ALPHA_MIN_SGIX 0x8320 +#define GL_ALPHA_MAX_SGIX 0x8321 +#endif + +#ifndef GL_SGIX_impact_pixel_texture +#define GL_PIXEL_TEX_GEN_Q_CEILING_SGIX 0x8184 +#define GL_PIXEL_TEX_GEN_Q_ROUND_SGIX 0x8185 +#define GL_PIXEL_TEX_GEN_Q_FLOOR_SGIX 0x8186 +#define GL_PIXEL_TEX_GEN_ALPHA_REPLACE_SGIX 0x8187 +#define GL_PIXEL_TEX_GEN_ALPHA_NO_REPLACE_SGIX 0x8188 +#define GL_PIXEL_TEX_GEN_ALPHA_LS_SGIX 0x8189 +#define GL_PIXEL_TEX_GEN_ALPHA_MS_SGIX 0x818A +#endif + +#ifndef GL_EXT_bgra +#define GL_BGR_EXT 0x80E0 +#define GL_BGRA_EXT 0x80E1 +#endif + +#ifndef GL_SGIX_async +#define GL_ASYNC_MARKER_SGIX 0x8329 +#endif + +#ifndef GL_SGIX_async_pixel +#define GL_ASYNC_TEX_IMAGE_SGIX 0x835C +#define GL_ASYNC_DRAW_PIXELS_SGIX 0x835D +#define GL_ASYNC_READ_PIXELS_SGIX 0x835E +#define GL_MAX_ASYNC_TEX_IMAGE_SGIX 0x835F +#define GL_MAX_ASYNC_DRAW_PIXELS_SGIX 0x8360 +#define GL_MAX_ASYNC_READ_PIXELS_SGIX 0x8361 +#endif + +#ifndef GL_SGIX_async_histogram +#define GL_ASYNC_HISTOGRAM_SGIX 0x832C +#define GL_MAX_ASYNC_HISTOGRAM_SGIX 0x832D +#endif + +#ifndef GL_INTEL_texture_scissor +#endif + +#ifndef GL_INTEL_parallel_arrays +#define GL_PARALLEL_ARRAYS_INTEL 0x83F4 +#define GL_VERTEX_ARRAY_PARALLEL_POINTERS_INTEL 0x83F5 +#define GL_NORMAL_ARRAY_PARALLEL_POINTERS_INTEL 0x83F6 +#define GL_COLOR_ARRAY_PARALLEL_POINTERS_INTEL 0x83F7 +#define GL_TEXTURE_COORD_ARRAY_PARALLEL_POINTERS_INTEL 0x83F8 +#endif + +#ifndef GL_HP_occlusion_test +#define GL_OCCLUSION_TEST_HP 0x8165 +#define GL_OCCLUSION_TEST_RESULT_HP 0x8166 +#endif + +#ifndef GL_EXT_pixel_transform +#define GL_PIXEL_TRANSFORM_2D_EXT 0x8330 +#define GL_PIXEL_MAG_FILTER_EXT 0x8331 +#define GL_PIXEL_MIN_FILTER_EXT 0x8332 +#define GL_PIXEL_CUBIC_WEIGHT_EXT 0x8333 +#define GL_CUBIC_EXT 0x8334 +#define GL_AVERAGE_EXT 0x8335 +#define GL_PIXEL_TRANSFORM_2D_STACK_DEPTH_EXT 0x8336 +#define GL_MAX_PIXEL_TRANSFORM_2D_STACK_DEPTH_EXT 0x8337 +#define GL_PIXEL_TRANSFORM_2D_MATRIX_EXT 0x8338 +#endif + +#ifndef GL_EXT_pixel_transform_color_table +#endif + +#ifndef GL_EXT_shared_texture_palette +#define GL_SHARED_TEXTURE_PALETTE_EXT 0x81FB +#endif + +#ifndef GL_EXT_separate_specular_color +#define GL_LIGHT_MODEL_COLOR_CONTROL_EXT 0x81F8 +#define GL_SINGLE_COLOR_EXT 0x81F9 +#define GL_SEPARATE_SPECULAR_COLOR_EXT 0x81FA +#endif + +#ifndef GL_EXT_secondary_color +#define GL_COLOR_SUM_EXT 0x8458 +#define GL_CURRENT_SECONDARY_COLOR_EXT 0x8459 +#define GL_SECONDARY_COLOR_ARRAY_SIZE_EXT 0x845A +#define GL_SECONDARY_COLOR_ARRAY_TYPE_EXT 0x845B +#define GL_SECONDARY_COLOR_ARRAY_STRIDE_EXT 0x845C +#define GL_SECONDARY_COLOR_ARRAY_POINTER_EXT 0x845D +#define GL_SECONDARY_COLOR_ARRAY_EXT 0x845E +#endif + +#ifndef GL_EXT_texture_perturb_normal +#define GL_PERTURB_EXT 0x85AE +#define GL_TEXTURE_NORMAL_EXT 0x85AF +#endif + +#ifndef GL_EXT_multi_draw_arrays +#endif + +#ifndef GL_EXT_fog_coord +#define GL_FOG_COORDINATE_SOURCE_EXT 0x8450 +#define GL_FOG_COORDINATE_EXT 0x8451 +#define GL_FRAGMENT_DEPTH_EXT 0x8452 +#define GL_CURRENT_FOG_COORDINATE_EXT 0x8453 +#define GL_FOG_COORDINATE_ARRAY_TYPE_EXT 0x8454 +#define GL_FOG_COORDINATE_ARRAY_STRIDE_EXT 0x8455 +#define GL_FOG_COORDINATE_ARRAY_POINTER_EXT 0x8456 +#define GL_FOG_COORDINATE_ARRAY_EXT 0x8457 +#endif + +#ifndef GL_REND_screen_coordinates +#define GL_SCREEN_COORDINATES_REND 0x8490 +#define GL_INVERTED_SCREEN_W_REND 0x8491 +#endif + +#ifndef GL_EXT_coordinate_frame +#define GL_TANGENT_ARRAY_EXT 0x8439 +#define GL_BINORMAL_ARRAY_EXT 0x843A +#define GL_CURRENT_TANGENT_EXT 0x843B +#define GL_CURRENT_BINORMAL_EXT 0x843C +#define GL_TANGENT_ARRAY_TYPE_EXT 0x843E +#define GL_TANGENT_ARRAY_STRIDE_EXT 0x843F +#define GL_BINORMAL_ARRAY_TYPE_EXT 0x8440 +#define GL_BINORMAL_ARRAY_STRIDE_EXT 0x8441 +#define GL_TANGENT_ARRAY_POINTER_EXT 0x8442 +#define GL_BINORMAL_ARRAY_POINTER_EXT 0x8443 +#define GL_MAP1_TANGENT_EXT 0x8444 +#define GL_MAP2_TANGENT_EXT 0x8445 +#define GL_MAP1_BINORMAL_EXT 0x8446 +#define GL_MAP2_BINORMAL_EXT 0x8447 +#endif + +#ifndef GL_EXT_texture_env_combine +#define GL_COMBINE_EXT 0x8570 +#define GL_COMBINE_RGB_EXT 0x8571 +#define GL_COMBINE_ALPHA_EXT 0x8572 +#define GL_RGB_SCALE_EXT 0x8573 +#define GL_ADD_SIGNED_EXT 0x8574 +#define GL_INTERPOLATE_EXT 0x8575 +#define GL_CONSTANT_EXT 0x8576 +#define GL_PRIMARY_COLOR_EXT 0x8577 +#define GL_PREVIOUS_EXT 0x8578 +#define GL_SOURCE0_RGB_EXT 0x8580 +#define GL_SOURCE1_RGB_EXT 0x8581 +#define GL_SOURCE2_RGB_EXT 0x8582 +#define GL_SOURCE0_ALPHA_EXT 0x8588 +#define GL_SOURCE1_ALPHA_EXT 0x8589 +#define GL_SOURCE2_ALPHA_EXT 0x858A +#define GL_OPERAND0_RGB_EXT 0x8590 +#define GL_OPERAND1_RGB_EXT 0x8591 +#define GL_OPERAND2_RGB_EXT 0x8592 +#define GL_OPERAND0_ALPHA_EXT 0x8598 +#define GL_OPERAND1_ALPHA_EXT 0x8599 +#define GL_OPERAND2_ALPHA_EXT 0x859A +#endif + +#ifndef GL_APPLE_specular_vector +#define GL_LIGHT_MODEL_SPECULAR_VECTOR_APPLE 0x85B0 +#endif + +#ifndef GL_APPLE_transform_hint +#define GL_TRANSFORM_HINT_APPLE 0x85B1 +#endif + +#ifndef GL_SGIX_fog_scale +#define GL_FOG_SCALE_SGIX 0x81FC +#define GL_FOG_SCALE_VALUE_SGIX 0x81FD +#endif + +#ifndef GL_SUNX_constant_data +#define GL_UNPACK_CONSTANT_DATA_SUNX 0x81D5 +#define GL_TEXTURE_CONSTANT_DATA_SUNX 0x81D6 +#endif + +#ifndef GL_SUN_global_alpha +#define GL_GLOBAL_ALPHA_SUN 0x81D9 +#define GL_GLOBAL_ALPHA_FACTOR_SUN 0x81DA +#endif + +#ifndef GL_SUN_triangle_list +#define GL_RESTART_SUN 0x0001 +#define GL_REPLACE_MIDDLE_SUN 0x0002 +#define GL_REPLACE_OLDEST_SUN 0x0003 +#define GL_TRIANGLE_LIST_SUN 0x81D7 +#define GL_REPLACEMENT_CODE_SUN 0x81D8 +#define GL_REPLACEMENT_CODE_ARRAY_SUN 0x85C0 +#define GL_REPLACEMENT_CODE_ARRAY_TYPE_SUN 0x85C1 +#define GL_REPLACEMENT_CODE_ARRAY_STRIDE_SUN 0x85C2 +#define GL_REPLACEMENT_CODE_ARRAY_POINTER_SUN 0x85C3 +#define GL_R1UI_V3F_SUN 0x85C4 +#define GL_R1UI_C4UB_V3F_SUN 0x85C5 +#define GL_R1UI_C3F_V3F_SUN 0x85C6 +#define GL_R1UI_N3F_V3F_SUN 0x85C7 +#define GL_R1UI_C4F_N3F_V3F_SUN 0x85C8 +#define GL_R1UI_T2F_V3F_SUN 0x85C9 +#define GL_R1UI_T2F_N3F_V3F_SUN 0x85CA +#define GL_R1UI_T2F_C4F_N3F_V3F_SUN 0x85CB +#endif + +#ifndef GL_SUN_vertex +#endif + +#ifndef GL_EXT_blend_func_separate +#define GL_BLEND_DST_RGB_EXT 0x80C8 +#define GL_BLEND_SRC_RGB_EXT 0x80C9 +#define GL_BLEND_DST_ALPHA_EXT 0x80CA +#define GL_BLEND_SRC_ALPHA_EXT 0x80CB +#endif + +#ifndef GL_INGR_color_clamp +#define GL_RED_MIN_CLAMP_INGR 0x8560 +#define GL_GREEN_MIN_CLAMP_INGR 0x8561 +#define GL_BLUE_MIN_CLAMP_INGR 0x8562 +#define GL_ALPHA_MIN_CLAMP_INGR 0x8563 +#define GL_RED_MAX_CLAMP_INGR 0x8564 +#define GL_GREEN_MAX_CLAMP_INGR 0x8565 +#define GL_BLUE_MAX_CLAMP_INGR 0x8566 +#define GL_ALPHA_MAX_CLAMP_INGR 0x8567 +#endif + +#ifndef GL_INGR_interlace_read +#define GL_INTERLACE_READ_INGR 0x8568 +#endif + +#ifndef GL_EXT_stencil_wrap +#define GL_INCR_WRAP_EXT 0x8507 +#define GL_DECR_WRAP_EXT 0x8508 +#endif + +#ifndef GL_EXT_422_pixels +#define GL_422_EXT 0x80CC +#define GL_422_REV_EXT 0x80CD +#define GL_422_AVERAGE_EXT 0x80CE +#define GL_422_REV_AVERAGE_EXT 0x80CF +#endif + +#ifndef GL_NV_texgen_reflection +#define GL_NORMAL_MAP_NV 0x8511 +#define GL_REFLECTION_MAP_NV 0x8512 +#endif + +#ifndef GL_EXT_texture_cube_map +#define GL_NORMAL_MAP_EXT 0x8511 +#define GL_REFLECTION_MAP_EXT 0x8512 +#define GL_TEXTURE_CUBE_MAP_EXT 0x8513 +#define GL_TEXTURE_BINDING_CUBE_MAP_EXT 0x8514 +#define GL_TEXTURE_CUBE_MAP_POSITIVE_X_EXT 0x8515 +#define GL_TEXTURE_CUBE_MAP_NEGATIVE_X_EXT 0x8516 +#define GL_TEXTURE_CUBE_MAP_POSITIVE_Y_EXT 0x8517 +#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Y_EXT 0x8518 +#define GL_TEXTURE_CUBE_MAP_POSITIVE_Z_EXT 0x8519 +#define GL_TEXTURE_CUBE_MAP_NEGATIVE_Z_EXT 0x851A +#define GL_PROXY_TEXTURE_CUBE_MAP_EXT 0x851B +#define GL_MAX_CUBE_MAP_TEXTURE_SIZE_EXT 0x851C +#endif + +#ifndef GL_SUN_convolution_border_modes +#define GL_WRAP_BORDER_SUN 0x81D4 +#endif + +#ifndef GL_EXT_texture_env_add +#endif + +#ifndef GL_EXT_texture_lod_bias +#define GL_MAX_TEXTURE_LOD_BIAS_EXT 0x84FD +#define GL_TEXTURE_FILTER_CONTROL_EXT 0x8500 +#define GL_TEXTURE_LOD_BIAS_EXT 0x8501 +#endif + +#ifndef GL_EXT_texture_filter_anisotropic +#define GL_TEXTURE_MAX_ANISOTROPY_EXT 0x84FE +#define GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT 0x84FF +#endif + +#ifndef GL_EXT_vertex_weighting +#define GL_MODELVIEW0_STACK_DEPTH_EXT GL_MODELVIEW_STACK_DEPTH +#define GL_MODELVIEW1_STACK_DEPTH_EXT 0x8502 +#define GL_MODELVIEW0_MATRIX_EXT GL_MODELVIEW_MATRIX +#define GL_MODELVIEW1_MATRIX_EXT 0x8506 +#define GL_VERTEX_WEIGHTING_EXT 0x8509 +#define GL_MODELVIEW0_EXT GL_MODELVIEW +#define GL_MODELVIEW1_EXT 0x850A +#define GL_CURRENT_VERTEX_WEIGHT_EXT 0x850B +#define GL_VERTEX_WEIGHT_ARRAY_EXT 0x850C +#define GL_VERTEX_WEIGHT_ARRAY_SIZE_EXT 0x850D +#define GL_VERTEX_WEIGHT_ARRAY_TYPE_EXT 0x850E +#define GL_VERTEX_WEIGHT_ARRAY_STRIDE_EXT 0x850F +#define GL_VERTEX_WEIGHT_ARRAY_POINTER_EXT 0x8510 +#endif + +#ifndef GL_NV_light_max_exponent +#define GL_MAX_SHININESS_NV 0x8504 +#define GL_MAX_SPOT_EXPONENT_NV 0x8505 +#endif + +#ifndef GL_NV_vertex_array_range +#define GL_VERTEX_ARRAY_RANGE_NV 0x851D +#define GL_VERTEX_ARRAY_RANGE_LENGTH_NV 0x851E +#define GL_VERTEX_ARRAY_RANGE_VALID_NV 0x851F +#define GL_MAX_VERTEX_ARRAY_RANGE_ELEMENT_NV 0x8520 +#define GL_VERTEX_ARRAY_RANGE_POINTER_NV 0x8521 +#endif + +#ifndef GL_NV_register_combiners +#define GL_REGISTER_COMBINERS_NV 0x8522 +#define GL_VARIABLE_A_NV 0x8523 +#define GL_VARIABLE_B_NV 0x8524 +#define GL_VARIABLE_C_NV 0x8525 +#define GL_VARIABLE_D_NV 0x8526 +#define GL_VARIABLE_E_NV 0x8527 +#define GL_VARIABLE_F_NV 0x8528 +#define GL_VARIABLE_G_NV 0x8529 +#define GL_CONSTANT_COLOR0_NV 0x852A +#define GL_CONSTANT_COLOR1_NV 0x852B +#define GL_PRIMARY_COLOR_NV 0x852C +#define GL_SECONDARY_COLOR_NV 0x852D +#define GL_SPARE0_NV 0x852E +#define GL_SPARE1_NV 0x852F +#define GL_DISCARD_NV 0x8530 +#define GL_E_TIMES_F_NV 0x8531 +#define GL_SPARE0_PLUS_SECONDARY_COLOR_NV 0x8532 +#define GL_UNSIGNED_IDENTITY_NV 0x8536 +#define GL_UNSIGNED_INVERT_NV 0x8537 +#define GL_EXPAND_NORMAL_NV 0x8538 +#define GL_EXPAND_NEGATE_NV 0x8539 +#define GL_HALF_BIAS_NORMAL_NV 0x853A +#define GL_HALF_BIAS_NEGATE_NV 0x853B +#define GL_SIGNED_IDENTITY_NV 0x853C +#define GL_SIGNED_NEGATE_NV 0x853D +#define GL_SCALE_BY_TWO_NV 0x853E +#define GL_SCALE_BY_FOUR_NV 0x853F +#define GL_SCALE_BY_ONE_HALF_NV 0x8540 +#define GL_BIAS_BY_NEGATIVE_ONE_HALF_NV 0x8541 +#define GL_COMBINER_INPUT_NV 0x8542 +#define GL_COMBINER_MAPPING_NV 0x8543 +#define GL_COMBINER_COMPONENT_USAGE_NV 0x8544 +#define GL_COMBINER_AB_DOT_PRODUCT_NV 0x8545 +#define GL_COMBINER_CD_DOT_PRODUCT_NV 0x8546 +#define GL_COMBINER_MUX_SUM_NV 0x8547 +#define GL_COMBINER_SCALE_NV 0x8548 +#define GL_COMBINER_BIAS_NV 0x8549 +#define GL_COMBINER_AB_OUTPUT_NV 0x854A +#define GL_COMBINER_CD_OUTPUT_NV 0x854B +#define GL_COMBINER_SUM_OUTPUT_NV 0x854C +#define GL_MAX_GENERAL_COMBINERS_NV 0x854D +#define GL_NUM_GENERAL_COMBINERS_NV 0x854E +#define GL_COLOR_SUM_CLAMP_NV 0x854F +#define GL_COMBINER0_NV 0x8550 +#define GL_COMBINER1_NV 0x8551 +#define GL_COMBINER2_NV 0x8552 +#define GL_COMBINER3_NV 0x8553 +#define GL_COMBINER4_NV 0x8554 +#define GL_COMBINER5_NV 0x8555 +#define GL_COMBINER6_NV 0x8556 +#define GL_COMBINER7_NV 0x8557 +/* reuse GL_TEXTURE0_ARB */ +/* reuse GL_TEXTURE1_ARB */ +/* reuse GL_ZERO */ +/* reuse GL_NONE */ +/* reuse GL_FOG */ +#endif + +#ifndef GL_NV_fog_distance +#define GL_FOG_DISTANCE_MODE_NV 0x855A +#define GL_EYE_RADIAL_NV 0x855B +#define GL_EYE_PLANE_ABSOLUTE_NV 0x855C +/* reuse GL_EYE_PLANE */ +#endif + +#ifndef GL_NV_texgen_emboss +#define GL_EMBOSS_LIGHT_NV 0x855D +#define GL_EMBOSS_CONSTANT_NV 0x855E +#define GL_EMBOSS_MAP_NV 0x855F +#endif + +#ifndef GL_NV_blend_square +#endif + +#ifndef GL_NV_texture_env_combine4 +#define GL_COMBINE4_NV 0x8503 +#define GL_SOURCE3_RGB_NV 0x8583 +#define GL_SOURCE3_ALPHA_NV 0x858B +#define GL_OPERAND3_RGB_NV 0x8593 +#define GL_OPERAND3_ALPHA_NV 0x859B +#endif + +#ifndef GL_MESA_resize_buffers +#endif + +#ifndef GL_MESA_window_pos +#endif + +#ifndef GL_EXT_texture_compression_s3tc +#define GL_COMPRESSED_RGB_S3TC_DXT1_EXT 0x83F0 +#define GL_COMPRESSED_RGBA_S3TC_DXT1_EXT 0x83F1 +#define GL_COMPRESSED_RGBA_S3TC_DXT3_EXT 0x83F2 +#define GL_COMPRESSED_RGBA_S3TC_DXT5_EXT 0x83F3 +#endif + +#ifndef GL_IBM_cull_vertex +#define GL_CULL_VERTEX_IBM 103050 +#endif + +#ifndef GL_IBM_multimode_draw_arrays +#endif + +#ifndef GL_IBM_vertex_array_lists +#define GL_VERTEX_ARRAY_LIST_IBM 103070 +#define GL_NORMAL_ARRAY_LIST_IBM 103071 +#define GL_COLOR_ARRAY_LIST_IBM 103072 +#define GL_INDEX_ARRAY_LIST_IBM 103073 +#define GL_TEXTURE_COORD_ARRAY_LIST_IBM 103074 +#define GL_EDGE_FLAG_ARRAY_LIST_IBM 103075 +#define GL_FOG_COORDINATE_ARRAY_LIST_IBM 103076 +#define GL_SECONDARY_COLOR_ARRAY_LIST_IBM 103077 +#define GL_VERTEX_ARRAY_LIST_STRIDE_IBM 103080 +#define GL_NORMAL_ARRAY_LIST_STRIDE_IBM 103081 +#define GL_COLOR_ARRAY_LIST_STRIDE_IBM 103082 +#define GL_INDEX_ARRAY_LIST_STRIDE_IBM 103083 +#define GL_TEXTURE_COORD_ARRAY_LIST_STRIDE_IBM 103084 +#define GL_EDGE_FLAG_ARRAY_LIST_STRIDE_IBM 103085 +#define GL_FOG_COORDINATE_ARRAY_LIST_STRIDE_IBM 103086 +#define GL_SECONDARY_COLOR_ARRAY_LIST_STRIDE_IBM 103087 +#endif + +#ifndef GL_SGIX_subsample +#define GL_PACK_SUBSAMPLE_RATE_SGIX 0x85A0 +#define GL_UNPACK_SUBSAMPLE_RATE_SGIX 0x85A1 +#define GL_PIXEL_SUBSAMPLE_4444_SGIX 0x85A2 +#define GL_PIXEL_SUBSAMPLE_2424_SGIX 0x85A3 +#define GL_PIXEL_SUBSAMPLE_4242_SGIX 0x85A4 +#endif + +#ifndef GL_SGIX_ycrcb_subsample +#endif + +#ifndef GL_SGIX_ycrcba +#define GL_YCRCB_SGIX 0x8318 +#define GL_YCRCBA_SGIX 0x8319 +#endif + +#ifndef GL_SGI_depth_pass_instrument +#define GL_DEPTH_PASS_INSTRUMENT_SGIX 0x8310 +#define GL_DEPTH_PASS_INSTRUMENT_COUNTERS_SGIX 0x8311 +#define GL_DEPTH_PASS_INSTRUMENT_MAX_SGIX 0x8312 +#endif + +#ifndef GL_3DFX_texture_compression_FXT1 +#define GL_COMPRESSED_RGB_FXT1_3DFX 0x86B0 +#define GL_COMPRESSED_RGBA_FXT1_3DFX 0x86B1 +#endif + +#ifndef GL_3DFX_multisample +#define GL_MULTISAMPLE_3DFX 0x86B2 +#define GL_SAMPLE_BUFFERS_3DFX 0x86B3 +#define GL_SAMPLES_3DFX 0x86B4 +#define GL_MULTISAMPLE_BIT_3DFX 0x20000000 +#endif + +#ifndef GL_3DFX_tbuffer +#endif + +#ifndef GL_EXT_multisample +#define GL_MULTISAMPLE_EXT 0x809D +#define GL_SAMPLE_ALPHA_TO_MASK_EXT 0x809E +#define GL_SAMPLE_ALPHA_TO_ONE_EXT 0x809F +#define GL_SAMPLE_MASK_EXT 0x80A0 +#define GL_1PASS_EXT 0x80A1 +#define GL_2PASS_0_EXT 0x80A2 +#define GL_2PASS_1_EXT 0x80A3 +#define GL_4PASS_0_EXT 0x80A4 +#define GL_4PASS_1_EXT 0x80A5 +#define GL_4PASS_2_EXT 0x80A6 +#define GL_4PASS_3_EXT 0x80A7 +#define GL_SAMPLE_BUFFERS_EXT 0x80A8 +#define GL_SAMPLES_EXT 0x80A9 +#define GL_SAMPLE_MASK_VALUE_EXT 0x80AA +#define GL_SAMPLE_MASK_INVERT_EXT 0x80AB +#define GL_SAMPLE_PATTERN_EXT 0x80AC +#define GL_MULTISAMPLE_BIT_EXT 0x20000000 +#endif + +#ifndef GL_SGIX_vertex_preclip +#define GL_VERTEX_PRECLIP_SGIX 0x83EE +#define GL_VERTEX_PRECLIP_HINT_SGIX 0x83EF +#endif + +#ifndef GL_SGIX_convolution_accuracy +#define GL_CONVOLUTION_HINT_SGIX 0x8316 +#endif + +#ifndef GL_SGIX_resample +#define GL_PACK_RESAMPLE_SGIX 0x842C +#define GL_UNPACK_RESAMPLE_SGIX 0x842D +#define GL_RESAMPLE_REPLICATE_SGIX 0x842E +#define GL_RESAMPLE_ZERO_FILL_SGIX 0x842F +#define GL_RESAMPLE_DECIMATE_SGIX 0x8430 +#endif + +#ifndef GL_SGIS_point_line_texgen +#define GL_EYE_DISTANCE_TO_POINT_SGIS 0x81F0 +#define GL_OBJECT_DISTANCE_TO_POINT_SGIS 0x81F1 +#define GL_EYE_DISTANCE_TO_LINE_SGIS 0x81F2 +#define GL_OBJECT_DISTANCE_TO_LINE_SGIS 0x81F3 +#define GL_EYE_POINT_SGIS 0x81F4 +#define GL_OBJECT_POINT_SGIS 0x81F5 +#define GL_EYE_LINE_SGIS 0x81F6 +#define GL_OBJECT_LINE_SGIS 0x81F7 +#endif + +#ifndef GL_SGIS_texture_color_mask +#define GL_TEXTURE_COLOR_WRITEMASK_SGIS 0x81EF +#endif + +#ifndef GL_EXT_texture_env_dot3 +#define GL_DOT3_RGB_EXT 0x8740 +#define GL_DOT3_RGBA_EXT 0x8741 +#endif + +#ifndef GL_ATI_texture_mirror_once +#define GL_MIRROR_CLAMP_ATI 0x8742 +#define GL_MIRROR_CLAMP_TO_EDGE_ATI 0x8743 +#endif + +#ifndef GL_NV_fence +#define GL_ALL_COMPLETED_NV 0x84F2 +#define GL_FENCE_STATUS_NV 0x84F3 +#define GL_FENCE_CONDITION_NV 0x84F4 +#endif + +#ifndef GL_IBM_texture_mirrored_repeat +#define GL_MIRRORED_REPEAT_IBM 0x8370 +#endif + +#ifndef GL_NV_evaluators +#define GL_EVAL_2D_NV 0x86C0 +#define GL_EVAL_TRIANGULAR_2D_NV 0x86C1 +#define GL_MAP_TESSELLATION_NV 0x86C2 +#define GL_MAP_ATTRIB_U_ORDER_NV 0x86C3 +#define GL_MAP_ATTRIB_V_ORDER_NV 0x86C4 +#define GL_EVAL_FRACTIONAL_TESSELLATION_NV 0x86C5 +#define GL_EVAL_VERTEX_ATTRIB0_NV 0x86C6 +#define GL_EVAL_VERTEX_ATTRIB1_NV 0x86C7 +#define GL_EVAL_VERTEX_ATTRIB2_NV 0x86C8 +#define GL_EVAL_VERTEX_ATTRIB3_NV 0x86C9 +#define GL_EVAL_VERTEX_ATTRIB4_NV 0x86CA +#define GL_EVAL_VERTEX_ATTRIB5_NV 0x86CB +#define GL_EVAL_VERTEX_ATTRIB6_NV 0x86CC +#define GL_EVAL_VERTEX_ATTRIB7_NV 0x86CD +#define GL_EVAL_VERTEX_ATTRIB8_NV 0x86CE +#define GL_EVAL_VERTEX_ATTRIB9_NV 0x86CF +#define GL_EVAL_VERTEX_ATTRIB10_NV 0x86D0 +#define GL_EVAL_VERTEX_ATTRIB11_NV 0x86D1 +#define GL_EVAL_VERTEX_ATTRIB12_NV 0x86D2 +#define GL_EVAL_VERTEX_ATTRIB13_NV 0x86D3 +#define GL_EVAL_VERTEX_ATTRIB14_NV 0x86D4 +#define GL_EVAL_VERTEX_ATTRIB15_NV 0x86D5 +#define GL_MAX_MAP_TESSELLATION_NV 0x86D6 +#define GL_MAX_RATIONAL_EVAL_ORDER_NV 0x86D7 +#endif + +#ifndef GL_NV_packed_depth_stencil +#define GL_DEPTH_STENCIL_NV 0x84F9 +#define GL_UNSIGNED_INT_24_8_NV 0x84FA +#endif + +#ifndef GL_NV_register_combiners2 +#define GL_PER_STAGE_CONSTANTS_NV 0x8535 +#endif + +#ifndef GL_NV_texture_compression_vtc +#endif + +#ifndef GL_NV_texture_rectangle +#define GL_TEXTURE_RECTANGLE_NV 0x84F5 +#define GL_TEXTURE_BINDING_RECTANGLE_NV 0x84F6 +#define GL_PROXY_TEXTURE_RECTANGLE_NV 0x84F7 +#define GL_MAX_RECTANGLE_TEXTURE_SIZE_NV 0x84F8 +#endif + +#ifndef GL_NV_texture_shader +#define GL_OFFSET_TEXTURE_RECTANGLE_NV 0x864C +#define GL_OFFSET_TEXTURE_RECTANGLE_SCALE_NV 0x864D +#define GL_DOT_PRODUCT_TEXTURE_RECTANGLE_NV 0x864E +#define GL_RGBA_UNSIGNED_DOT_PRODUCT_MAPPING_NV 0x86D9 +#define GL_UNSIGNED_INT_S8_S8_8_8_NV 0x86DA +#define GL_UNSIGNED_INT_8_8_S8_S8_REV_NV 0x86DB +#define GL_DSDT_MAG_INTENSITY_NV 0x86DC +#define GL_SHADER_CONSISTENT_NV 0x86DD +#define GL_TEXTURE_SHADER_NV 0x86DE +#define GL_SHADER_OPERATION_NV 0x86DF +#define GL_CULL_MODES_NV 0x86E0 +#define GL_OFFSET_TEXTURE_MATRIX_NV 0x86E1 +#define GL_OFFSET_TEXTURE_SCALE_NV 0x86E2 +#define GL_OFFSET_TEXTURE_BIAS_NV 0x86E3 +#define GL_OFFSET_TEXTURE_2D_MATRIX_NV GL_OFFSET_TEXTURE_MATRIX_NV +#define GL_OFFSET_TEXTURE_2D_SCALE_NV GL_OFFSET_TEXTURE_SCALE_NV +#define GL_OFFSET_TEXTURE_2D_BIAS_NV GL_OFFSET_TEXTURE_BIAS_NV +#define GL_PREVIOUS_TEXTURE_INPUT_NV 0x86E4 +#define GL_CONST_EYE_NV 0x86E5 +#define GL_PASS_THROUGH_NV 0x86E6 +#define GL_CULL_FRAGMENT_NV 0x86E7 +#define GL_OFFSET_TEXTURE_2D_NV 0x86E8 +#define GL_DEPENDENT_AR_TEXTURE_2D_NV 0x86E9 +#define GL_DEPENDENT_GB_TEXTURE_2D_NV 0x86EA +#define GL_DOT_PRODUCT_NV 0x86EC +#define GL_DOT_PRODUCT_DEPTH_REPLACE_NV 0x86ED +#define GL_DOT_PRODUCT_TEXTURE_2D_NV 0x86EE +#define GL_DOT_PRODUCT_TEXTURE_CUBE_MAP_NV 0x86F0 +#define GL_DOT_PRODUCT_DIFFUSE_CUBE_MAP_NV 0x86F1 +#define GL_DOT_PRODUCT_REFLECT_CUBE_MAP_NV 0x86F2 +#define GL_DOT_PRODUCT_CONST_EYE_REFLECT_CUBE_MAP_NV 0x86F3 +#define GL_HILO_NV 0x86F4 +#define GL_DSDT_NV 0x86F5 +#define GL_DSDT_MAG_NV 0x86F6 +#define GL_DSDT_MAG_VIB_NV 0x86F7 +#define GL_HILO16_NV 0x86F8 +#define GL_SIGNED_HILO_NV 0x86F9 +#define GL_SIGNED_HILO16_NV 0x86FA +#define GL_SIGNED_RGBA_NV 0x86FB +#define GL_SIGNED_RGBA8_NV 0x86FC +#define GL_SIGNED_RGB_NV 0x86FE +#define GL_SIGNED_RGB8_NV 0x86FF +#define GL_SIGNED_LUMINANCE_NV 0x8701 +#define GL_SIGNED_LUMINANCE8_NV 0x8702 +#define GL_SIGNED_LUMINANCE_ALPHA_NV 0x8703 +#define GL_SIGNED_LUMINANCE8_ALPHA8_NV 0x8704 +#define GL_SIGNED_ALPHA_NV 0x8705 +#define GL_SIGNED_ALPHA8_NV 0x8706 +#define GL_SIGNED_INTENSITY_NV 0x8707 +#define GL_SIGNED_INTENSITY8_NV 0x8708 +#define GL_DSDT8_NV 0x8709 +#define GL_DSDT8_MAG8_NV 0x870A +#define GL_DSDT8_MAG8_INTENSITY8_NV 0x870B +#define GL_SIGNED_RGB_UNSIGNED_ALPHA_NV 0x870C +#define GL_SIGNED_RGB8_UNSIGNED_ALPHA8_NV 0x870D +#define GL_HI_SCALE_NV 0x870E +#define GL_LO_SCALE_NV 0x870F +#define GL_DS_SCALE_NV 0x8710 +#define GL_DT_SCALE_NV 0x8711 +#define GL_MAGNITUDE_SCALE_NV 0x8712 +#define GL_VIBRANCE_SCALE_NV 0x8713 +#define GL_HI_BIAS_NV 0x8714 +#define GL_LO_BIAS_NV 0x8715 +#define GL_DS_BIAS_NV 0x8716 +#define GL_DT_BIAS_NV 0x8717 +#define GL_MAGNITUDE_BIAS_NV 0x8718 +#define GL_VIBRANCE_BIAS_NV 0x8719 +#define GL_TEXTURE_BORDER_VALUES_NV 0x871A +#define GL_TEXTURE_HI_SIZE_NV 0x871B +#define GL_TEXTURE_LO_SIZE_NV 0x871C +#define GL_TEXTURE_DS_SIZE_NV 0x871D +#define GL_TEXTURE_DT_SIZE_NV 0x871E +#define GL_TEXTURE_MAG_SIZE_NV 0x871F +#endif + +#ifndef GL_NV_texture_shader2 +#define GL_DOT_PRODUCT_TEXTURE_3D_NV 0x86EF +#endif + +#ifndef GL_NV_vertex_array_range2 +#define GL_VERTEX_ARRAY_RANGE_WITHOUT_FLUSH_NV 0x8533 +#endif + +#ifndef GL_NV_vertex_program +#define GL_VERTEX_PROGRAM_NV 0x8620 +#define GL_VERTEX_STATE_PROGRAM_NV 0x8621 +#define GL_ATTRIB_ARRAY_SIZE_NV 0x8623 +#define GL_ATTRIB_ARRAY_STRIDE_NV 0x8624 +#define GL_ATTRIB_ARRAY_TYPE_NV 0x8625 +#define GL_CURRENT_ATTRIB_NV 0x8626 +#define GL_PROGRAM_LENGTH_NV 0x8627 +#define GL_PROGRAM_STRING_NV 0x8628 +#define GL_MODELVIEW_PROJECTION_NV 0x8629 +#define GL_IDENTITY_NV 0x862A +#define GL_INVERSE_NV 0x862B +#define GL_TRANSPOSE_NV 0x862C +#define GL_INVERSE_TRANSPOSE_NV 0x862D +#define GL_MAX_TRACK_MATRIX_STACK_DEPTH_NV 0x862E +#define GL_MAX_TRACK_MATRICES_NV 0x862F +#define GL_MATRIX0_NV 0x8630 +#define GL_MATRIX1_NV 0x8631 +#define GL_MATRIX2_NV 0x8632 +#define GL_MATRIX3_NV 0x8633 +#define GL_MATRIX4_NV 0x8634 +#define GL_MATRIX5_NV 0x8635 +#define GL_MATRIX6_NV 0x8636 +#define GL_MATRIX7_NV 0x8637 +#define GL_CURRENT_MATRIX_STACK_DEPTH_NV 0x8640 +#define GL_CURRENT_MATRIX_NV 0x8641 +#define GL_VERTEX_PROGRAM_POINT_SIZE_NV 0x8642 +#define GL_VERTEX_PROGRAM_TWO_SIDE_NV 0x8643 +#define GL_PROGRAM_PARAMETER_NV 0x8644 +#define GL_ATTRIB_ARRAY_POINTER_NV 0x8645 +#define GL_PROGRAM_TARGET_NV 0x8646 +#define GL_PROGRAM_RESIDENT_NV 0x8647 +#define GL_TRACK_MATRIX_NV 0x8648 +#define GL_TRACK_MATRIX_TRANSFORM_NV 0x8649 +#define GL_VERTEX_PROGRAM_BINDING_NV 0x864A +#define GL_PROGRAM_ERROR_POSITION_NV 0x864B +#define GL_VERTEX_ATTRIB_ARRAY0_NV 0x8650 +#define GL_VERTEX_ATTRIB_ARRAY1_NV 0x8651 +#define GL_VERTEX_ATTRIB_ARRAY2_NV 0x8652 +#define GL_VERTEX_ATTRIB_ARRAY3_NV 0x8653 +#define GL_VERTEX_ATTRIB_ARRAY4_NV 0x8654 +#define GL_VERTEX_ATTRIB_ARRAY5_NV 0x8655 +#define GL_VERTEX_ATTRIB_ARRAY6_NV 0x8656 +#define GL_VERTEX_ATTRIB_ARRAY7_NV 0x8657 +#define GL_VERTEX_ATTRIB_ARRAY8_NV 0x8658 +#define GL_VERTEX_ATTRIB_ARRAY9_NV 0x8659 +#define GL_VERTEX_ATTRIB_ARRAY10_NV 0x865A +#define GL_VERTEX_ATTRIB_ARRAY11_NV 0x865B +#define GL_VERTEX_ATTRIB_ARRAY12_NV 0x865C +#define GL_VERTEX_ATTRIB_ARRAY13_NV 0x865D +#define GL_VERTEX_ATTRIB_ARRAY14_NV 0x865E +#define GL_VERTEX_ATTRIB_ARRAY15_NV 0x865F +#define GL_MAP1_VERTEX_ATTRIB0_4_NV 0x8660 +#define GL_MAP1_VERTEX_ATTRIB1_4_NV 0x8661 +#define GL_MAP1_VERTEX_ATTRIB2_4_NV 0x8662 +#define GL_MAP1_VERTEX_ATTRIB3_4_NV 0x8663 +#define GL_MAP1_VERTEX_ATTRIB4_4_NV 0x8664 +#define GL_MAP1_VERTEX_ATTRIB5_4_NV 0x8665 +#define GL_MAP1_VERTEX_ATTRIB6_4_NV 0x8666 +#define GL_MAP1_VERTEX_ATTRIB7_4_NV 0x8667 +#define GL_MAP1_VERTEX_ATTRIB8_4_NV 0x8668 +#define GL_MAP1_VERTEX_ATTRIB9_4_NV 0x8669 +#define GL_MAP1_VERTEX_ATTRIB10_4_NV 0x866A +#define GL_MAP1_VERTEX_ATTRIB11_4_NV 0x866B +#define GL_MAP1_VERTEX_ATTRIB12_4_NV 0x866C +#define GL_MAP1_VERTEX_ATTRIB13_4_NV 0x866D +#define GL_MAP1_VERTEX_ATTRIB14_4_NV 0x866E +#define GL_MAP1_VERTEX_ATTRIB15_4_NV 0x866F +#define GL_MAP2_VERTEX_ATTRIB0_4_NV 0x8670 +#define GL_MAP2_VERTEX_ATTRIB1_4_NV 0x8671 +#define GL_MAP2_VERTEX_ATTRIB2_4_NV 0x8672 +#define GL_MAP2_VERTEX_ATTRIB3_4_NV 0x8673 +#define GL_MAP2_VERTEX_ATTRIB4_4_NV 0x8674 +#define GL_MAP2_VERTEX_ATTRIB5_4_NV 0x8675 +#define GL_MAP2_VERTEX_ATTRIB6_4_NV 0x8676 +#define GL_MAP2_VERTEX_ATTRIB7_4_NV 0x8677 +#define GL_MAP2_VERTEX_ATTRIB8_4_NV 0x8678 +#define GL_MAP2_VERTEX_ATTRIB9_4_NV 0x8679 +#define GL_MAP2_VERTEX_ATTRIB10_4_NV 0x867A +#define GL_MAP2_VERTEX_ATTRIB11_4_NV 0x867B +#define GL_MAP2_VERTEX_ATTRIB12_4_NV 0x867C +#define GL_MAP2_VERTEX_ATTRIB13_4_NV 0x867D +#define GL_MAP2_VERTEX_ATTRIB14_4_NV 0x867E +#define GL_MAP2_VERTEX_ATTRIB15_4_NV 0x867F +#endif + +#ifndef GL_SGIX_texture_coordinate_clamp +#define GL_TEXTURE_MAX_CLAMP_S_SGIX 0x8369 +#define GL_TEXTURE_MAX_CLAMP_T_SGIX 0x836A +#define GL_TEXTURE_MAX_CLAMP_R_SGIX 0x836B +#endif + +#ifndef GL_SGIX_scalebias_hint +#define GL_SCALEBIAS_HINT_SGIX 0x8322 +#endif + +#ifndef GL_OML_interlace +#define GL_INTERLACE_OML 0x8980 +#define GL_INTERLACE_READ_OML 0x8981 +#endif + +#ifndef GL_OML_subsample +#define GL_FORMAT_SUBSAMPLE_24_24_OML 0x8982 +#define GL_FORMAT_SUBSAMPLE_244_244_OML 0x8983 +#endif + +#ifndef GL_OML_resample +#define GL_PACK_RESAMPLE_OML 0x8984 +#define GL_UNPACK_RESAMPLE_OML 0x8985 +#define GL_RESAMPLE_REPLICATE_OML 0x8986 +#define GL_RESAMPLE_ZERO_FILL_OML 0x8987 +#define GL_RESAMPLE_AVERAGE_OML 0x8988 +#define GL_RESAMPLE_DECIMATE_OML 0x8989 +#endif + +#ifndef GL_NV_copy_depth_to_color +#define GL_DEPTH_STENCIL_TO_RGBA_NV 0x886E +#define GL_DEPTH_STENCIL_TO_BGRA_NV 0x886F +#endif + +#ifndef GL_ATI_envmap_bumpmap +#define GL_BUMP_ROT_MATRIX_ATI 0x8775 +#define GL_BUMP_ROT_MATRIX_SIZE_ATI 0x8776 +#define GL_BUMP_NUM_TEX_UNITS_ATI 0x8777 +#define GL_BUMP_TEX_UNITS_ATI 0x8778 +#define GL_DUDV_ATI 0x8779 +#define GL_DU8DV8_ATI 0x877A +#define GL_BUMP_ENVMAP_ATI 0x877B +#define GL_BUMP_TARGET_ATI 0x877C +#endif + +#ifndef GL_ATI_fragment_shader +#define GL_FRAGMENT_SHADER_ATI 0x8920 +#define GL_REG_0_ATI 0x8921 +#define GL_REG_1_ATI 0x8922 +#define GL_REG_2_ATI 0x8923 +#define GL_REG_3_ATI 0x8924 +#define GL_REG_4_ATI 0x8925 +#define GL_REG_5_ATI 0x8926 +#define GL_REG_6_ATI 0x8927 +#define GL_REG_7_ATI 0x8928 +#define GL_REG_8_ATI 0x8929 +#define GL_REG_9_ATI 0x892A +#define GL_REG_10_ATI 0x892B +#define GL_REG_11_ATI 0x892C +#define GL_REG_12_ATI 0x892D +#define GL_REG_13_ATI 0x892E +#define GL_REG_14_ATI 0x892F +#define GL_REG_15_ATI 0x8930 +#define GL_REG_16_ATI 0x8931 +#define GL_REG_17_ATI 0x8932 +#define GL_REG_18_ATI 0x8933 +#define GL_REG_19_ATI 0x8934 +#define GL_REG_20_ATI 0x8935 +#define GL_REG_21_ATI 0x8936 +#define GL_REG_22_ATI 0x8937 +#define GL_REG_23_ATI 0x8938 +#define GL_REG_24_ATI 0x8939 +#define GL_REG_25_ATI 0x893A +#define GL_REG_26_ATI 0x893B +#define GL_REG_27_ATI 0x893C +#define GL_REG_28_ATI 0x893D +#define GL_REG_29_ATI 0x893E +#define GL_REG_30_ATI 0x893F +#define GL_REG_31_ATI 0x8940 +#define GL_CON_0_ATI 0x8941 +#define GL_CON_1_ATI 0x8942 +#define GL_CON_2_ATI 0x8943 +#define GL_CON_3_ATI 0x8944 +#define GL_CON_4_ATI 0x8945 +#define GL_CON_5_ATI 0x8946 +#define GL_CON_6_ATI 0x8947 +#define GL_CON_7_ATI 0x8948 +#define GL_CON_8_ATI 0x8949 +#define GL_CON_9_ATI 0x894A +#define GL_CON_10_ATI 0x894B +#define GL_CON_11_ATI 0x894C +#define GL_CON_12_ATI 0x894D +#define GL_CON_13_ATI 0x894E +#define GL_CON_14_ATI 0x894F +#define GL_CON_15_ATI 0x8950 +#define GL_CON_16_ATI 0x8951 +#define GL_CON_17_ATI 0x8952 +#define GL_CON_18_ATI 0x8953 +#define GL_CON_19_ATI 0x8954 +#define GL_CON_20_ATI 0x8955 +#define GL_CON_21_ATI 0x8956 +#define GL_CON_22_ATI 0x8957 +#define GL_CON_23_ATI 0x8958 +#define GL_CON_24_ATI 0x8959 +#define GL_CON_25_ATI 0x895A +#define GL_CON_26_ATI 0x895B +#define GL_CON_27_ATI 0x895C +#define GL_CON_28_ATI 0x895D +#define GL_CON_29_ATI 0x895E +#define GL_CON_30_ATI 0x895F +#define GL_CON_31_ATI 0x8960 +#define GL_MOV_ATI 0x8961 +#define GL_ADD_ATI 0x8963 +#define GL_MUL_ATI 0x8964 +#define GL_SUB_ATI 0x8965 +#define GL_DOT3_ATI 0x8966 +#define GL_DOT4_ATI 0x8967 +#define GL_MAD_ATI 0x8968 +#define GL_LERP_ATI 0x8969 +#define GL_CND_ATI 0x896A +#define GL_CND0_ATI 0x896B +#define GL_DOT2_ADD_ATI 0x896C +#define GL_SECONDARY_INTERPOLATOR_ATI 0x896D +#define GL_NUM_FRAGMENT_REGISTERS_ATI 0x896E +#define GL_NUM_FRAGMENT_CONSTANTS_ATI 0x896F +#define GL_NUM_PASSES_ATI 0x8970 +#define GL_NUM_INSTRUCTIONS_PER_PASS_ATI 0x8971 +#define GL_NUM_INSTRUCTIONS_TOTAL_ATI 0x8972 +#define GL_NUM_INPUT_INTERPOLATOR_COMPONENTS_ATI 0x8973 +#define GL_NUM_LOOPBACK_COMPONENTS_ATI 0x8974 +#define GL_COLOR_ALPHA_PAIRING_ATI 0x8975 +#define GL_SWIZZLE_STR_ATI 0x8976 +#define GL_SWIZZLE_STQ_ATI 0x8977 +#define GL_SWIZZLE_STR_DR_ATI 0x8978 +#define GL_SWIZZLE_STQ_DQ_ATI 0x8979 +#define GL_SWIZZLE_STRQ_ATI 0x897A +#define GL_SWIZZLE_STRQ_DQ_ATI 0x897B +#define GL_RED_BIT_ATI 0x00000001 +#define GL_GREEN_BIT_ATI 0x00000002 +#define GL_BLUE_BIT_ATI 0x00000004 +#define GL_2X_BIT_ATI 0x00000001 +#define GL_4X_BIT_ATI 0x00000002 +#define GL_8X_BIT_ATI 0x00000004 +#define GL_HALF_BIT_ATI 0x00000008 +#define GL_QUARTER_BIT_ATI 0x00000010 +#define GL_EIGHTH_BIT_ATI 0x00000020 +#define GL_SATURATE_BIT_ATI 0x00000040 +#define GL_COMP_BIT_ATI 0x00000002 +#define GL_NEGATE_BIT_ATI 0x00000004 +#define GL_BIAS_BIT_ATI 0x00000008 +#endif + +#ifndef GL_ATI_pn_triangles +#define GL_PN_TRIANGLES_ATI 0x87F0 +#define GL_MAX_PN_TRIANGLES_TESSELATION_LEVEL_ATI 0x87F1 +#define GL_PN_TRIANGLES_POINT_MODE_ATI 0x87F2 +#define GL_PN_TRIANGLES_NORMAL_MODE_ATI 0x87F3 +#define GL_PN_TRIANGLES_TESSELATION_LEVEL_ATI 0x87F4 +#define GL_PN_TRIANGLES_POINT_MODE_LINEAR_ATI 0x87F5 +#define GL_PN_TRIANGLES_POINT_MODE_CUBIC_ATI 0x87F6 +#define GL_PN_TRIANGLES_NORMAL_MODE_LINEAR_ATI 0x87F7 +#define GL_PN_TRIANGLES_NORMAL_MODE_QUADRATIC_ATI 0x87F8 +#endif + +#ifndef GL_ATI_vertex_array_object +#define GL_STATIC_ATI 0x8760 +#define GL_DYNAMIC_ATI 0x8761 +#define GL_PRESERVE_ATI 0x8762 +#define GL_DISCARD_ATI 0x8763 +#define GL_OBJECT_BUFFER_SIZE_ATI 0x8764 +#define GL_OBJECT_BUFFER_USAGE_ATI 0x8765 +#define GL_ARRAY_OBJECT_BUFFER_ATI 0x8766 +#define GL_ARRAY_OBJECT_OFFSET_ATI 0x8767 +#endif + +#ifndef GL_EXT_vertex_shader +#define GL_VERTEX_SHADER_EXT 0x8780 +#define GL_VERTEX_SHADER_BINDING_EXT 0x8781 +#define GL_OP_INDEX_EXT 0x8782 +#define GL_OP_NEGATE_EXT 0x8783 +#define GL_OP_DOT3_EXT 0x8784 +#define GL_OP_DOT4_EXT 0x8785 +#define GL_OP_MUL_EXT 0x8786 +#define GL_OP_ADD_EXT 0x8787 +#define GL_OP_MADD_EXT 0x8788 +#define GL_OP_FRAC_EXT 0x8789 +#define GL_OP_MAX_EXT 0x878A +#define GL_OP_MIN_EXT 0x878B +#define GL_OP_SET_GE_EXT 0x878C +#define GL_OP_SET_LT_EXT 0x878D +#define GL_OP_CLAMP_EXT 0x878E +#define GL_OP_FLOOR_EXT 0x878F +#define GL_OP_ROUND_EXT 0x8790 +#define GL_OP_EXP_BASE_2_EXT 0x8791 +#define GL_OP_LOG_BASE_2_EXT 0x8792 +#define GL_OP_POWER_EXT 0x8793 +#define GL_OP_RECIP_EXT 0x8794 +#define GL_OP_RECIP_SQRT_EXT 0x8795 +#define GL_OP_SUB_EXT 0x8796 +#define GL_OP_CROSS_PRODUCT_EXT 0x8797 +#define GL_OP_MULTIPLY_MATRIX_EXT 0x8798 +#define GL_OP_MOV_EXT 0x8799 +#define GL_OUTPUT_VERTEX_EXT 0x879A +#define GL_OUTPUT_COLOR0_EXT 0x879B +#define GL_OUTPUT_COLOR1_EXT 0x879C +#define GL_OUTPUT_TEXTURE_COORD0_EXT 0x879D +#define GL_OUTPUT_TEXTURE_COORD1_EXT 0x879E +#define GL_OUTPUT_TEXTURE_COORD2_EXT 0x879F +#define GL_OUTPUT_TEXTURE_COORD3_EXT 0x87A0 +#define GL_OUTPUT_TEXTURE_COORD4_EXT 0x87A1 +#define GL_OUTPUT_TEXTURE_COORD5_EXT 0x87A2 +#define GL_OUTPUT_TEXTURE_COORD6_EXT 0x87A3 +#define GL_OUTPUT_TEXTURE_COORD7_EXT 0x87A4 +#define GL_OUTPUT_TEXTURE_COORD8_EXT 0x87A5 +#define GL_OUTPUT_TEXTURE_COORD9_EXT 0x87A6 +#define GL_OUTPUT_TEXTURE_COORD10_EXT 0x87A7 +#define GL_OUTPUT_TEXTURE_COORD11_EXT 0x87A8 +#define GL_OUTPUT_TEXTURE_COORD12_EXT 0x87A9 +#define GL_OUTPUT_TEXTURE_COORD13_EXT 0x87AA +#define GL_OUTPUT_TEXTURE_COORD14_EXT 0x87AB +#define GL_OUTPUT_TEXTURE_COORD15_EXT 0x87AC +#define GL_OUTPUT_TEXTURE_COORD16_EXT 0x87AD +#define GL_OUTPUT_TEXTURE_COORD17_EXT 0x87AE +#define GL_OUTPUT_TEXTURE_COORD18_EXT 0x87AF +#define GL_OUTPUT_TEXTURE_COORD19_EXT 0x87B0 +#define GL_OUTPUT_TEXTURE_COORD20_EXT 0x87B1 +#define GL_OUTPUT_TEXTURE_COORD21_EXT 0x87B2 +#define GL_OUTPUT_TEXTURE_COORD22_EXT 0x87B3 +#define GL_OUTPUT_TEXTURE_COORD23_EXT 0x87B4 +#define GL_OUTPUT_TEXTURE_COORD24_EXT 0x87B5 +#define GL_OUTPUT_TEXTURE_COORD25_EXT 0x87B6 +#define GL_OUTPUT_TEXTURE_COORD26_EXT 0x87B7 +#define GL_OUTPUT_TEXTURE_COORD27_EXT 0x87B8 +#define GL_OUTPUT_TEXTURE_COORD28_EXT 0x87B9 +#define GL_OUTPUT_TEXTURE_COORD29_EXT 0x87BA +#define GL_OUTPUT_TEXTURE_COORD30_EXT 0x87BB +#define GL_OUTPUT_TEXTURE_COORD31_EXT 0x87BC +#define GL_OUTPUT_FOG_EXT 0x87BD +#define GL_SCALAR_EXT 0x87BE +#define GL_VECTOR_EXT 0x87BF +#define GL_MATRIX_EXT 0x87C0 +#define GL_VARIANT_EXT 0x87C1 +#define GL_INVARIANT_EXT 0x87C2 +#define GL_LOCAL_CONSTANT_EXT 0x87C3 +#define GL_LOCAL_EXT 0x87C4 +#define GL_MAX_VERTEX_SHADER_INSTRUCTIONS_EXT 0x87C5 +#define GL_MAX_VERTEX_SHADER_VARIANTS_EXT 0x87C6 +#define GL_MAX_VERTEX_SHADER_INVARIANTS_EXT 0x87C7 +#define GL_MAX_VERTEX_SHADER_LOCAL_CONSTANTS_EXT 0x87C8 +#define GL_MAX_VERTEX_SHADER_LOCALS_EXT 0x87C9 +#define GL_MAX_OPTIMIZED_VERTEX_SHADER_INSTRUCTIONS_EXT 0x87CA +#define GL_MAX_OPTIMIZED_VERTEX_SHADER_VARIANTS_EXT 0x87CB +#define GL_MAX_OPTIMIZED_VERTEX_SHADER_LOCAL_CONSTANTS_EXT 0x87CC +#define GL_MAX_OPTIMIZED_VERTEX_SHADER_INVARIANTS_EXT 0x87CD +#define GL_MAX_OPTIMIZED_VERTEX_SHADER_LOCALS_EXT 0x87CE +#define GL_VERTEX_SHADER_INSTRUCTIONS_EXT 0x87CF +#define GL_VERTEX_SHADER_VARIANTS_EXT 0x87D0 +#define GL_VERTEX_SHADER_INVARIANTS_EXT 0x87D1 +#define GL_VERTEX_SHADER_LOCAL_CONSTANTS_EXT 0x87D2 +#define GL_VERTEX_SHADER_LOCALS_EXT 0x87D3 +#define GL_VERTEX_SHADER_OPTIMIZED_EXT 0x87D4 +#define GL_X_EXT 0x87D5 +#define GL_Y_EXT 0x87D6 +#define GL_Z_EXT 0x87D7 +#define GL_W_EXT 0x87D8 +#define GL_NEGATIVE_X_EXT 0x87D9 +#define GL_NEGATIVE_Y_EXT 0x87DA +#define GL_NEGATIVE_Z_EXT 0x87DB +#define GL_NEGATIVE_W_EXT 0x87DC +#define GL_ZERO_EXT 0x87DD +#define GL_ONE_EXT 0x87DE +#define GL_NEGATIVE_ONE_EXT 0x87DF +#define GL_NORMALIZED_RANGE_EXT 0x87E0 +#define GL_FULL_RANGE_EXT 0x87E1 +#define GL_CURRENT_VERTEX_EXT 0x87E2 +#define GL_MVP_MATRIX_EXT 0x87E3 +#define GL_VARIANT_VALUE_EXT 0x87E4 +#define GL_VARIANT_DATATYPE_EXT 0x87E5 +#define GL_VARIANT_ARRAY_STRIDE_EXT 0x87E6 +#define GL_VARIANT_ARRAY_TYPE_EXT 0x87E7 +#define GL_VARIANT_ARRAY_EXT 0x87E8 +#define GL_VARIANT_ARRAY_POINTER_EXT 0x87E9 +#define GL_INVARIANT_VALUE_EXT 0x87EA +#define GL_INVARIANT_DATATYPE_EXT 0x87EB +#define GL_LOCAL_CONSTANT_VALUE_EXT 0x87EC +#define GL_LOCAL_CONSTANT_DATATYPE_EXT 0x87ED +#endif + +#ifndef GL_ATI_vertex_streams +#define GL_MAX_VERTEX_STREAMS_ATI 0x876B +#define GL_VERTEX_STREAM0_ATI 0x876C +#define GL_VERTEX_STREAM1_ATI 0x876D +#define GL_VERTEX_STREAM2_ATI 0x876E +#define GL_VERTEX_STREAM3_ATI 0x876F +#define GL_VERTEX_STREAM4_ATI 0x8770 +#define GL_VERTEX_STREAM5_ATI 0x8771 +#define GL_VERTEX_STREAM6_ATI 0x8772 +#define GL_VERTEX_STREAM7_ATI 0x8773 +#define GL_VERTEX_SOURCE_ATI 0x8774 +#endif + +#ifndef GL_ATI_element_array +#define GL_ELEMENT_ARRAY_ATI 0x8768 +#define GL_ELEMENT_ARRAY_TYPE_ATI 0x8769 +#define GL_ELEMENT_ARRAY_POINTER_ATI 0x876A +#endif + +#ifndef GL_SUN_mesh_array +#define GL_QUAD_MESH_SUN 0x8614 +#define GL_TRIANGLE_MESH_SUN 0x8615 +#endif + +#ifndef GL_SUN_slice_accum +#define GL_SLICE_ACCUM_SUN 0x85CC +#endif + +#ifndef GL_NV_multisample_filter_hint +#define GL_MULTISAMPLE_FILTER_HINT_NV 0x8534 +#endif + +#ifndef GL_NV_depth_clamp +#define GL_DEPTH_CLAMP_NV 0x864F +#endif + +#ifndef GL_NV_occlusion_query +#define GL_PIXEL_COUNTER_BITS_NV 0x8864 +#define GL_CURRENT_OCCLUSION_QUERY_ID_NV 0x8865 +#define GL_PIXEL_COUNT_NV 0x8866 +#define GL_PIXEL_COUNT_AVAILABLE_NV 0x8867 +#endif + +#ifndef GL_NV_point_sprite +#define GL_POINT_SPRITE_NV 0x8861 +#define GL_COORD_REPLACE_NV 0x8862 +#define GL_POINT_SPRITE_R_MODE_NV 0x8863 +#endif + +#ifndef GL_NV_texture_shader3 +#define GL_OFFSET_PROJECTIVE_TEXTURE_2D_NV 0x8850 +#define GL_OFFSET_PROJECTIVE_TEXTURE_2D_SCALE_NV 0x8851 +#define GL_OFFSET_PROJECTIVE_TEXTURE_RECTANGLE_NV 0x8852 +#define GL_OFFSET_PROJECTIVE_TEXTURE_RECTANGLE_SCALE_NV 0x8853 +#define GL_OFFSET_HILO_TEXTURE_2D_NV 0x8854 +#define GL_OFFSET_HILO_TEXTURE_RECTANGLE_NV 0x8855 +#define GL_OFFSET_HILO_PROJECTIVE_TEXTURE_2D_NV 0x8856 +#define GL_OFFSET_HILO_PROJECTIVE_TEXTURE_RECTANGLE_NV 0x8857 +#define GL_DEPENDENT_HILO_TEXTURE_2D_NV 0x8858 +#define GL_DEPENDENT_RGB_TEXTURE_3D_NV 0x8859 +#define GL_DEPENDENT_RGB_TEXTURE_CUBE_MAP_NV 0x885A +#define GL_DOT_PRODUCT_PASS_THROUGH_NV 0x885B +#define GL_DOT_PRODUCT_TEXTURE_1D_NV 0x885C +#define GL_DOT_PRODUCT_AFFINE_DEPTH_REPLACE_NV 0x885D +#define GL_HILO8_NV 0x885E +#define GL_SIGNED_HILO8_NV 0x885F +#define GL_FORCE_BLUE_TO_ONE_NV 0x8860 +#endif + +#ifndef GL_NV_vertex_program1_1 +#endif + +#ifndef GL_EXT_shadow_funcs +#endif + +#ifndef GL_EXT_stencil_two_side +#define GL_STENCIL_TEST_TWO_SIDE_EXT 0x8910 +#define GL_ACTIVE_STENCIL_FACE_EXT 0x8911 +#endif + +#ifndef GL_ATI_text_fragment_shader +#define GL_TEXT_FRAGMENT_SHADER_ATI 0x8200 +#endif + +#ifndef GL_APPLE_client_storage +#define GL_UNPACK_CLIENT_STORAGE_APPLE 0x85B2 +#endif + +#ifndef GL_APPLE_element_array +#define GL_ELEMENT_ARRAY_APPLE 0x8A0C +#define GL_ELEMENT_ARRAY_TYPE_APPLE 0x8A0D +#define GL_ELEMENT_ARRAY_POINTER_APPLE 0x8A0E +#endif + +#ifndef GL_APPLE_fence +#define GL_DRAW_PIXELS_APPLE 0x8A0A +#define GL_FENCE_APPLE 0x8A0B +#endif + +#ifndef GL_APPLE_vertex_array_object +#define GL_VERTEX_ARRAY_BINDING_APPLE 0x85B5 +#endif + +#ifndef GL_APPLE_vertex_array_range +#define GL_VERTEX_ARRAY_RANGE_APPLE 0x851D +#define GL_VERTEX_ARRAY_RANGE_LENGTH_APPLE 0x851E +#define GL_VERTEX_ARRAY_STORAGE_HINT_APPLE 0x851F +#define GL_VERTEX_ARRAY_RANGE_POINTER_APPLE 0x8521 +#define GL_STORAGE_CLIENT_APPLE 0x85B4 +#define GL_STORAGE_CACHED_APPLE 0x85BE +#define GL_STORAGE_SHARED_APPLE 0x85BF +#endif + +#ifndef GL_APPLE_ycbcr_422 +#define GL_YCBCR_422_APPLE 0x85B9 +#define GL_UNSIGNED_SHORT_8_8_APPLE 0x85BA +#define GL_UNSIGNED_SHORT_8_8_REV_APPLE 0x85BB +#endif + +#ifndef GL_S3_s3tc +#define GL_RGB_S3TC 0x83A0 +#define GL_RGB4_S3TC 0x83A1 +#define GL_RGBA_S3TC 0x83A2 +#define GL_RGBA4_S3TC 0x83A3 +#endif + +#ifndef GL_ATI_draw_buffers +#define GL_MAX_DRAW_BUFFERS_ATI 0x8824 +#define GL_DRAW_BUFFER0_ATI 0x8825 +#define GL_DRAW_BUFFER1_ATI 0x8826 +#define GL_DRAW_BUFFER2_ATI 0x8827 +#define GL_DRAW_BUFFER3_ATI 0x8828 +#define GL_DRAW_BUFFER4_ATI 0x8829 +#define GL_DRAW_BUFFER5_ATI 0x882A +#define GL_DRAW_BUFFER6_ATI 0x882B +#define GL_DRAW_BUFFER7_ATI 0x882C +#define GL_DRAW_BUFFER8_ATI 0x882D +#define GL_DRAW_BUFFER9_ATI 0x882E +#define GL_DRAW_BUFFER10_ATI 0x882F +#define GL_DRAW_BUFFER11_ATI 0x8830 +#define GL_DRAW_BUFFER12_ATI 0x8831 +#define GL_DRAW_BUFFER13_ATI 0x8832 +#define GL_DRAW_BUFFER14_ATI 0x8833 +#define GL_DRAW_BUFFER15_ATI 0x8834 +#endif + +#ifndef GL_ATI_pixel_format_float +#define GL_TYPE_RGBA_FLOAT_ATI 0x8820 +#define GL_COLOR_CLEAR_UNCLAMPED_VALUE_ATI 0x8835 +#endif + +#ifndef GL_ATI_texture_env_combine3 +#define GL_MODULATE_ADD_ATI 0x8744 +#define GL_MODULATE_SIGNED_ADD_ATI 0x8745 +#define GL_MODULATE_SUBTRACT_ATI 0x8746 +#endif + +#ifndef GL_ATI_texture_float +#define GL_RGBA_FLOAT32_ATI 0x8814 +#define GL_RGB_FLOAT32_ATI 0x8815 +#define GL_ALPHA_FLOAT32_ATI 0x8816 +#define GL_INTENSITY_FLOAT32_ATI 0x8817 +#define GL_LUMINANCE_FLOAT32_ATI 0x8818 +#define GL_LUMINANCE_ALPHA_FLOAT32_ATI 0x8819 +#define GL_RGBA_FLOAT16_ATI 0x881A +#define GL_RGB_FLOAT16_ATI 0x881B +#define GL_ALPHA_FLOAT16_ATI 0x881C +#define GL_INTENSITY_FLOAT16_ATI 0x881D +#define GL_LUMINANCE_FLOAT16_ATI 0x881E +#define GL_LUMINANCE_ALPHA_FLOAT16_ATI 0x881F +#endif + +#ifndef GL_NV_float_buffer +#define GL_FLOAT_R_NV 0x8880 +#define GL_FLOAT_RG_NV 0x8881 +#define GL_FLOAT_RGB_NV 0x8882 +#define GL_FLOAT_RGBA_NV 0x8883 +#define GL_FLOAT_R16_NV 0x8884 +#define GL_FLOAT_R32_NV 0x8885 +#define GL_FLOAT_RG16_NV 0x8886 +#define GL_FLOAT_RG32_NV 0x8887 +#define GL_FLOAT_RGB16_NV 0x8888 +#define GL_FLOAT_RGB32_NV 0x8889 +#define GL_FLOAT_RGBA16_NV 0x888A +#define GL_FLOAT_RGBA32_NV 0x888B +#define GL_TEXTURE_FLOAT_COMPONENTS_NV 0x888C +#define GL_FLOAT_CLEAR_COLOR_VALUE_NV 0x888D +#define GL_FLOAT_RGBA_MODE_NV 0x888E +#endif + +#ifndef GL_NV_fragment_program +#define GL_MAX_FRAGMENT_PROGRAM_LOCAL_PARAMETERS_NV 0x8868 +#define GL_FRAGMENT_PROGRAM_NV 0x8870 +#define GL_MAX_TEXTURE_COORDS_NV 0x8871 +#define GL_MAX_TEXTURE_IMAGE_UNITS_NV 0x8872 +#define GL_FRAGMENT_PROGRAM_BINDING_NV 0x8873 +#define GL_PROGRAM_ERROR_STRING_NV 0x8874 +#endif + +#ifndef GL_NV_half_float +#define GL_HALF_FLOAT_NV 0x140B +#endif + +#ifndef GL_NV_pixel_data_range +#define GL_WRITE_PIXEL_DATA_RANGE_NV 0x8878 +#define GL_READ_PIXEL_DATA_RANGE_NV 0x8879 +#define GL_WRITE_PIXEL_DATA_RANGE_LENGTH_NV 0x887A +#define GL_READ_PIXEL_DATA_RANGE_LENGTH_NV 0x887B +#define GL_WRITE_PIXEL_DATA_RANGE_POINTER_NV 0x887C +#define GL_READ_PIXEL_DATA_RANGE_POINTER_NV 0x887D +#endif + +#ifndef GL_NV_primitive_restart +#define GL_PRIMITIVE_RESTART_NV 0x8558 +#define GL_PRIMITIVE_RESTART_INDEX_NV 0x8559 +#endif + +#ifndef GL_NV_texture_expand_normal +#define GL_TEXTURE_UNSIGNED_REMAP_MODE_NV 0x888F +#endif + +#ifndef GL_NV_vertex_program2 +#endif + +#ifndef GL_ATI_map_object_buffer +#endif + +#ifndef GL_ATI_separate_stencil +#define GL_STENCIL_BACK_FUNC_ATI 0x8800 +#define GL_STENCIL_BACK_FAIL_ATI 0x8801 +#define GL_STENCIL_BACK_PASS_DEPTH_FAIL_ATI 0x8802 +#define GL_STENCIL_BACK_PASS_DEPTH_PASS_ATI 0x8803 +#endif + +#ifndef GL_ATI_vertex_attrib_array_object +#endif + +#ifndef GL_OES_read_format +#define GL_IMPLEMENTATION_COLOR_READ_TYPE_OES 0x8B9A +#define GL_IMPLEMENTATION_COLOR_READ_FORMAT_OES 0x8B9B +#endif + +#ifndef GL_EXT_depth_bounds_test +#define GL_DEPTH_BOUNDS_TEST_EXT 0x8890 +#define GL_DEPTH_BOUNDS_EXT 0x8891 +#endif + +#ifndef GL_EXT_texture_mirror_clamp +#define GL_MIRROR_CLAMP_EXT 0x8742 +#define GL_MIRROR_CLAMP_TO_EDGE_EXT 0x8743 +#define GL_MIRROR_CLAMP_TO_BORDER_EXT 0x8912 +#endif + +#ifndef GL_EXT_blend_equation_separate +#define GL_BLEND_EQUATION_RGB_EXT 0x8009 +#define GL_BLEND_EQUATION_ALPHA_EXT 0x883D +#endif + +#ifndef GL_MESA_pack_invert +#define GL_PACK_INVERT_MESA 0x8758 +#endif + +#ifndef GL_MESA_ycbcr_texture +#define GL_UNSIGNED_SHORT_8_8_MESA 0x85BA +#define GL_UNSIGNED_SHORT_8_8_REV_MESA 0x85BB +#define GL_YCBCR_MESA 0x8757 +#endif + +#ifndef GL_EXT_pixel_buffer_object +#define GL_PIXEL_PACK_BUFFER_EXT 0x88EB +#define GL_PIXEL_UNPACK_BUFFER_EXT 0x88EC +#define GL_PIXEL_PACK_BUFFER_BINDING_EXT 0x88ED +#define GL_PIXEL_UNPACK_BUFFER_BINDING_EXT 0x88EF +#endif + +#ifndef GL_NV_fragment_program_option +#endif + +#ifndef GL_NV_fragment_program2 +#define GL_MAX_PROGRAM_EXEC_INSTRUCTIONS_NV 0x88F4 +#define GL_MAX_PROGRAM_CALL_DEPTH_NV 0x88F5 +#define GL_MAX_PROGRAM_IF_DEPTH_NV 0x88F6 +#define GL_MAX_PROGRAM_LOOP_DEPTH_NV 0x88F7 +#define GL_MAX_PROGRAM_LOOP_COUNT_NV 0x88F8 +#endif + +#ifndef GL_NV_vertex_program2_option +/* reuse GL_MAX_PROGRAM_EXEC_INSTRUCTIONS_NV */ +/* reuse GL_MAX_PROGRAM_CALL_DEPTH_NV */ +#endif + +#ifndef GL_NV_vertex_program3 +/* reuse GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS_ARB */ +#endif + +#ifndef GL_EXT_framebuffer_object +#define GL_INVALID_FRAMEBUFFER_OPERATION_EXT 0x0506 +#define GL_MAX_RENDERBUFFER_SIZE_EXT 0x84E8 +#define GL_FRAMEBUFFER_BINDING_EXT 0x8CA6 +#define GL_RENDERBUFFER_BINDING_EXT 0x8CA7 +#define GL_FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE_EXT 0x8CD0 +#define GL_FRAMEBUFFER_ATTACHMENT_OBJECT_NAME_EXT 0x8CD1 +#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LEVEL_EXT 0x8CD2 +#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_CUBE_MAP_FACE_EXT 0x8CD3 +#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_3D_ZOFFSET_EXT 0x8CD4 +#define GL_FRAMEBUFFER_COMPLETE_EXT 0x8CD5 +#define GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT_EXT 0x8CD6 +#define GL_FRAMEBUFFER_INCOMPLETE_MISSING_ATTACHMENT_EXT 0x8CD7 +#define GL_FRAMEBUFFER_INCOMPLETE_DIMENSIONS_EXT 0x8CD9 +#define GL_FRAMEBUFFER_INCOMPLETE_FORMATS_EXT 0x8CDA +#define GL_FRAMEBUFFER_INCOMPLETE_DRAW_BUFFER_EXT 0x8CDB +#define GL_FRAMEBUFFER_INCOMPLETE_READ_BUFFER_EXT 0x8CDC +#define GL_FRAMEBUFFER_UNSUPPORTED_EXT 0x8CDD +#define GL_MAX_COLOR_ATTACHMENTS_EXT 0x8CDF +#define GL_COLOR_ATTACHMENT0_EXT 0x8CE0 +#define GL_COLOR_ATTACHMENT1_EXT 0x8CE1 +#define GL_COLOR_ATTACHMENT2_EXT 0x8CE2 +#define GL_COLOR_ATTACHMENT3_EXT 0x8CE3 +#define GL_COLOR_ATTACHMENT4_EXT 0x8CE4 +#define GL_COLOR_ATTACHMENT5_EXT 0x8CE5 +#define GL_COLOR_ATTACHMENT6_EXT 0x8CE6 +#define GL_COLOR_ATTACHMENT7_EXT 0x8CE7 +#define GL_COLOR_ATTACHMENT8_EXT 0x8CE8 +#define GL_COLOR_ATTACHMENT9_EXT 0x8CE9 +#define GL_COLOR_ATTACHMENT10_EXT 0x8CEA +#define GL_COLOR_ATTACHMENT11_EXT 0x8CEB +#define GL_COLOR_ATTACHMENT12_EXT 0x8CEC +#define GL_COLOR_ATTACHMENT13_EXT 0x8CED +#define GL_COLOR_ATTACHMENT14_EXT 0x8CEE +#define GL_COLOR_ATTACHMENT15_EXT 0x8CEF +#define GL_DEPTH_ATTACHMENT_EXT 0x8D00 +#define GL_STENCIL_ATTACHMENT_EXT 0x8D20 +#define GL_FRAMEBUFFER_EXT 0x8D40 +#define GL_RENDERBUFFER_EXT 0x8D41 +#define GL_RENDERBUFFER_WIDTH_EXT 0x8D42 +#define GL_RENDERBUFFER_HEIGHT_EXT 0x8D43 +#define GL_RENDERBUFFER_INTERNAL_FORMAT_EXT 0x8D44 +#define GL_STENCIL_INDEX1_EXT 0x8D46 +#define GL_STENCIL_INDEX4_EXT 0x8D47 +#define GL_STENCIL_INDEX8_EXT 0x8D48 +#define GL_STENCIL_INDEX16_EXT 0x8D49 +#define GL_RENDERBUFFER_RED_SIZE_EXT 0x8D50 +#define GL_RENDERBUFFER_GREEN_SIZE_EXT 0x8D51 +#define GL_RENDERBUFFER_BLUE_SIZE_EXT 0x8D52 +#define GL_RENDERBUFFER_ALPHA_SIZE_EXT 0x8D53 +#define GL_RENDERBUFFER_DEPTH_SIZE_EXT 0x8D54 +#define GL_RENDERBUFFER_STENCIL_SIZE_EXT 0x8D55 +#endif + +#ifndef GL_GREMEDY_string_marker +#endif + +#ifndef GL_EXT_packed_depth_stencil +#define GL_DEPTH_STENCIL_EXT 0x84F9 +#define GL_UNSIGNED_INT_24_8_EXT 0x84FA +#define GL_DEPTH24_STENCIL8_EXT 0x88F0 +#define GL_TEXTURE_STENCIL_SIZE_EXT 0x88F1 +#endif + +#ifndef GL_EXT_stencil_clear_tag +#define GL_STENCIL_TAG_BITS_EXT 0x88F2 +#define GL_STENCIL_CLEAR_TAG_VALUE_EXT 0x88F3 +#endif + +#ifndef GL_EXT_texture_sRGB +#define GL_SRGB_EXT 0x8C40 +#define GL_SRGB8_EXT 0x8C41 +#define GL_SRGB_ALPHA_EXT 0x8C42 +#define GL_SRGB8_ALPHA8_EXT 0x8C43 +#define GL_SLUMINANCE_ALPHA_EXT 0x8C44 +#define GL_SLUMINANCE8_ALPHA8_EXT 0x8C45 +#define GL_SLUMINANCE_EXT 0x8C46 +#define GL_SLUMINANCE8_EXT 0x8C47 +#define GL_COMPRESSED_SRGB_EXT 0x8C48 +#define GL_COMPRESSED_SRGB_ALPHA_EXT 0x8C49 +#define GL_COMPRESSED_SLUMINANCE_EXT 0x8C4A +#define GL_COMPRESSED_SLUMINANCE_ALPHA_EXT 0x8C4B +#define GL_COMPRESSED_SRGB_S3TC_DXT1_EXT 0x8C4C +#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT1_EXT 0x8C4D +#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT3_EXT 0x8C4E +#define GL_COMPRESSED_SRGB_ALPHA_S3TC_DXT5_EXT 0x8C4F +#endif + +#ifndef GL_EXT_framebuffer_blit +#define GL_READ_FRAMEBUFFER_EXT 0x8CA8 +#define GL_DRAW_FRAMEBUFFER_EXT 0x8CA9 +#define GL_DRAW_FRAMEBUFFER_BINDING_EXT GL_FRAMEBUFFER_BINDING_EXT +#define GL_READ_FRAMEBUFFER_BINDING_EXT 0x8CAA +#endif + +#ifndef GL_EXT_framebuffer_multisample +#define GL_RENDERBUFFER_SAMPLES_EXT 0x8CAB +#define GL_FRAMEBUFFER_INCOMPLETE_MULTISAMPLE_EXT 0x8D56 +#define GL_MAX_SAMPLES_EXT 0x8D57 +#endif + +#ifndef GL_MESAX_texture_stack +#define GL_TEXTURE_1D_STACK_MESAX 0x8759 +#define GL_TEXTURE_2D_STACK_MESAX 0x875A +#define GL_PROXY_TEXTURE_1D_STACK_MESAX 0x875B +#define GL_PROXY_TEXTURE_2D_STACK_MESAX 0x875C +#define GL_TEXTURE_1D_STACK_BINDING_MESAX 0x875D +#define GL_TEXTURE_2D_STACK_BINDING_MESAX 0x875E +#endif + +#ifndef GL_EXT_timer_query +#define GL_TIME_ELAPSED_EXT 0x88BF +#endif + +#ifndef GL_EXT_gpu_program_parameters +#endif + +#ifndef GL_APPLE_flush_buffer_range +#define GL_BUFFER_SERIALIZED_MODIFY_APPLE 0x8A12 +#define GL_BUFFER_FLUSHING_UNMAP_APPLE 0x8A13 +#endif + +#ifndef GL_NV_gpu_program4 +#define GL_MIN_PROGRAM_TEXEL_OFFSET_NV 0x8904 +#define GL_MAX_PROGRAM_TEXEL_OFFSET_NV 0x8905 +#define GL_PROGRAM_ATTRIB_COMPONENTS_NV 0x8906 +#define GL_PROGRAM_RESULT_COMPONENTS_NV 0x8907 +#define GL_MAX_PROGRAM_ATTRIB_COMPONENTS_NV 0x8908 +#define GL_MAX_PROGRAM_RESULT_COMPONENTS_NV 0x8909 +#define GL_MAX_PROGRAM_GENERIC_ATTRIBS_NV 0x8DA5 +#define GL_MAX_PROGRAM_GENERIC_RESULTS_NV 0x8DA6 +#endif + +#ifndef GL_NV_geometry_program4 +#define GL_LINES_ADJACENCY_EXT 0x000A +#define GL_LINE_STRIP_ADJACENCY_EXT 0x000B +#define GL_TRIANGLES_ADJACENCY_EXT 0x000C +#define GL_TRIANGLE_STRIP_ADJACENCY_EXT 0x000D +#define GL_GEOMETRY_PROGRAM_NV 0x8C26 +#define GL_MAX_PROGRAM_OUTPUT_VERTICES_NV 0x8C27 +#define GL_MAX_PROGRAM_TOTAL_OUTPUT_COMPONENTS_NV 0x8C28 +#define GL_GEOMETRY_VERTICES_OUT_EXT 0x8DDA +#define GL_GEOMETRY_INPUT_TYPE_EXT 0x8DDB +#define GL_GEOMETRY_OUTPUT_TYPE_EXT 0x8DDC +#define GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS_EXT 0x8C29 +#define GL_FRAMEBUFFER_ATTACHMENT_LAYERED_EXT 0x8DA7 +#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS_EXT 0x8DA8 +#define GL_FRAMEBUFFER_INCOMPLETE_LAYER_COUNT_EXT 0x8DA9 +#define GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT 0x8CD4 +#define GL_PROGRAM_POINT_SIZE_EXT 0x8642 +#endif + +#ifndef GL_EXT_geometry_shader4 +#define GL_GEOMETRY_SHADER_EXT 0x8DD9 +/* reuse GL_GEOMETRY_VERTICES_OUT_EXT */ +/* reuse GL_GEOMETRY_INPUT_TYPE_EXT */ +/* reuse GL_GEOMETRY_OUTPUT_TYPE_EXT */ +/* reuse GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS_EXT */ +#define GL_MAX_GEOMETRY_VARYING_COMPONENTS_EXT 0x8DDD +#define GL_MAX_VERTEX_VARYING_COMPONENTS_EXT 0x8DDE +#define GL_MAX_VARYING_COMPONENTS_EXT 0x8B4B +#define GL_MAX_GEOMETRY_UNIFORM_COMPONENTS_EXT 0x8DDF +#define GL_MAX_GEOMETRY_OUTPUT_VERTICES_EXT 0x8DE0 +#define GL_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS_EXT 0x8DE1 +/* reuse GL_LINES_ADJACENCY_EXT */ +/* reuse GL_LINE_STRIP_ADJACENCY_EXT */ +/* reuse GL_TRIANGLES_ADJACENCY_EXT */ +/* reuse GL_TRIANGLE_STRIP_ADJACENCY_EXT */ +/* reuse GL_FRAMEBUFFER_INCOMPLETE_LAYER_TARGETS_EXT */ +/* reuse GL_FRAMEBUFFER_INCOMPLETE_LAYER_COUNT_EXT */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_LAYERED_EXT */ +/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT */ +/* reuse GL_PROGRAM_POINT_SIZE_EXT */ +#endif + +#ifndef GL_NV_vertex_program4 +#define GL_VERTEX_ATTRIB_ARRAY_INTEGER_NV 0x88FD +#endif + +#ifndef GL_EXT_gpu_shader4 +#define GL_SAMPLER_1D_ARRAY_EXT 0x8DC0 +#define GL_SAMPLER_2D_ARRAY_EXT 0x8DC1 +#define GL_SAMPLER_BUFFER_EXT 0x8DC2 +#define GL_SAMPLER_1D_ARRAY_SHADOW_EXT 0x8DC3 +#define GL_SAMPLER_2D_ARRAY_SHADOW_EXT 0x8DC4 +#define GL_SAMPLER_CUBE_SHADOW_EXT 0x8DC5 +#define GL_UNSIGNED_INT_VEC2_EXT 0x8DC6 +#define GL_UNSIGNED_INT_VEC3_EXT 0x8DC7 +#define GL_UNSIGNED_INT_VEC4_EXT 0x8DC8 +#define GL_INT_SAMPLER_1D_EXT 0x8DC9 +#define GL_INT_SAMPLER_2D_EXT 0x8DCA +#define GL_INT_SAMPLER_3D_EXT 0x8DCB +#define GL_INT_SAMPLER_CUBE_EXT 0x8DCC +#define GL_INT_SAMPLER_2D_RECT_EXT 0x8DCD +#define GL_INT_SAMPLER_1D_ARRAY_EXT 0x8DCE +#define GL_INT_SAMPLER_2D_ARRAY_EXT 0x8DCF +#define GL_INT_SAMPLER_BUFFER_EXT 0x8DD0 +#define GL_UNSIGNED_INT_SAMPLER_1D_EXT 0x8DD1 +#define GL_UNSIGNED_INT_SAMPLER_2D_EXT 0x8DD2 +#define GL_UNSIGNED_INT_SAMPLER_3D_EXT 0x8DD3 +#define GL_UNSIGNED_INT_SAMPLER_CUBE_EXT 0x8DD4 +#define GL_UNSIGNED_INT_SAMPLER_2D_RECT_EXT 0x8DD5 +#define GL_UNSIGNED_INT_SAMPLER_1D_ARRAY_EXT 0x8DD6 +#define GL_UNSIGNED_INT_SAMPLER_2D_ARRAY_EXT 0x8DD7 +#define GL_UNSIGNED_INT_SAMPLER_BUFFER_EXT 0x8DD8 +#endif + +#ifndef GL_EXT_draw_instanced +#endif + +#ifndef GL_EXT_packed_float +#define GL_R11F_G11F_B10F_EXT 0x8C3A +#define GL_UNSIGNED_INT_10F_11F_11F_REV_EXT 0x8C3B +#define GL_RGBA_SIGNED_COMPONENTS_EXT 0x8C3C +#endif + +#ifndef GL_EXT_texture_array +#define GL_TEXTURE_1D_ARRAY_EXT 0x8C18 +#define GL_PROXY_TEXTURE_1D_ARRAY_EXT 0x8C19 +#define GL_TEXTURE_2D_ARRAY_EXT 0x8C1A +#define GL_PROXY_TEXTURE_2D_ARRAY_EXT 0x8C1B +#define GL_TEXTURE_BINDING_1D_ARRAY_EXT 0x8C1C +#define GL_TEXTURE_BINDING_2D_ARRAY_EXT 0x8C1D +#define GL_MAX_ARRAY_TEXTURE_LAYERS_EXT 0x88FF +#define GL_COMPARE_REF_DEPTH_TO_TEXTURE_EXT 0x884E +/* reuse GL_FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER_EXT */ +#endif + +#ifndef GL_EXT_texture_buffer_object +#define GL_TEXTURE_BUFFER_EXT 0x8C2A +#define GL_MAX_TEXTURE_BUFFER_SIZE_EXT 0x8C2B +#define GL_TEXTURE_BINDING_BUFFER_EXT 0x8C2C +#define GL_TEXTURE_BUFFER_DATA_STORE_BINDING_EXT 0x8C2D +#define GL_TEXTURE_BUFFER_FORMAT_EXT 0x8C2E +#endif + +#ifndef GL_EXT_texture_compression_latc +#define GL_COMPRESSED_LUMINANCE_LATC1_EXT 0x8C70 +#define GL_COMPRESSED_SIGNED_LUMINANCE_LATC1_EXT 0x8C71 +#define GL_COMPRESSED_LUMINANCE_ALPHA_LATC2_EXT 0x8C72 +#define GL_COMPRESSED_SIGNED_LUMINANCE_ALPHA_LATC2_EXT 0x8C73 +#endif + +#ifndef GL_EXT_texture_compression_rgtc +#define GL_COMPRESSED_RED_RGTC1_EXT 0x8DBB +#define GL_COMPRESSED_SIGNED_RED_RGTC1_EXT 0x8DBC +#define GL_COMPRESSED_RED_GREEN_RGTC2_EXT 0x8DBD +#define GL_COMPRESSED_SIGNED_RED_GREEN_RGTC2_EXT 0x8DBE +#endif + +#ifndef GL_EXT_texture_shared_exponent +#define GL_RGB9_E5_EXT 0x8C3D +#define GL_UNSIGNED_INT_5_9_9_9_REV_EXT 0x8C3E +#define GL_TEXTURE_SHARED_SIZE_EXT 0x8C3F +#endif + +#ifndef GL_NV_depth_buffer_float +#define GL_DEPTH_COMPONENT32F_NV 0x8DAB +#define GL_DEPTH32F_STENCIL8_NV 0x8DAC +#define GL_FLOAT_32_UNSIGNED_INT_24_8_REV_NV 0x8DAD +#define GL_DEPTH_BUFFER_FLOAT_MODE_NV 0x8DAF +#endif + +#ifndef GL_NV_fragment_program4 +#endif + +#ifndef GL_NV_framebuffer_multisample_coverage +#define GL_RENDERBUFFER_COVERAGE_SAMPLES_NV 0x8CAB +#define GL_RENDERBUFFER_COLOR_SAMPLES_NV 0x8E10 +#define GL_MAX_MULTISAMPLE_COVERAGE_MODES_NV 0x8E11 +#define GL_MULTISAMPLE_COVERAGE_MODES_NV 0x8E12 +#endif + +#ifndef GL_EXT_framebuffer_sRGB +#define GL_FRAMEBUFFER_SRGB_EXT 0x8DB9 +#define GL_FRAMEBUFFER_SRGB_CAPABLE_EXT 0x8DBA +#endif + +#ifndef GL_NV_geometry_shader4 +#endif + +#ifndef GL_NV_parameter_buffer_object +#define GL_MAX_PROGRAM_PARAMETER_BUFFER_BINDINGS_NV 0x8DA0 +#define GL_MAX_PROGRAM_PARAMETER_BUFFER_SIZE_NV 0x8DA1 +#define GL_VERTEX_PROGRAM_PARAMETER_BUFFER_NV 0x8DA2 +#define GL_GEOMETRY_PROGRAM_PARAMETER_BUFFER_NV 0x8DA3 +#define GL_FRAGMENT_PROGRAM_PARAMETER_BUFFER_NV 0x8DA4 +#endif + +#ifndef GL_EXT_draw_buffers2 +#endif + +#ifndef GL_NV_transform_feedback +#define GL_BACK_PRIMARY_COLOR_NV 0x8C77 +#define GL_BACK_SECONDARY_COLOR_NV 0x8C78 +#define GL_TEXTURE_COORD_NV 0x8C79 +#define GL_CLIP_DISTANCE_NV 0x8C7A +#define GL_VERTEX_ID_NV 0x8C7B +#define GL_PRIMITIVE_ID_NV 0x8C7C +#define GL_GENERIC_ATTRIB_NV 0x8C7D +#define GL_TRANSFORM_FEEDBACK_ATTRIBS_NV 0x8C7E +#define GL_TRANSFORM_FEEDBACK_BUFFER_MODE_NV 0x8C7F +#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS_NV 0x8C80 +#define GL_ACTIVE_VARYINGS_NV 0x8C81 +#define GL_ACTIVE_VARYING_MAX_LENGTH_NV 0x8C82 +#define GL_TRANSFORM_FEEDBACK_VARYINGS_NV 0x8C83 +#define GL_TRANSFORM_FEEDBACK_BUFFER_START_NV 0x8C84 +#define GL_TRANSFORM_FEEDBACK_BUFFER_SIZE_NV 0x8C85 +#define GL_TRANSFORM_FEEDBACK_RECORD_NV 0x8C86 +#define GL_PRIMITIVES_GENERATED_NV 0x8C87 +#define GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN_NV 0x8C88 +#define GL_RASTERIZER_DISCARD_NV 0x8C89 +#define GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_ATTRIBS_NV 0x8C8A +#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS_NV 0x8C8B +#define GL_INTERLEAVED_ATTRIBS_NV 0x8C8C +#define GL_SEPARATE_ATTRIBS_NV 0x8C8D +#define GL_TRANSFORM_FEEDBACK_BUFFER_NV 0x8C8E +#define GL_TRANSFORM_FEEDBACK_BUFFER_BINDING_NV 0x8C8F +#define GL_LAYER_NV 0x8DAA +#define GL_NEXT_BUFFER_NV -2 +#define GL_SKIP_COMPONENTS4_NV -3 +#define GL_SKIP_COMPONENTS3_NV -4 +#define GL_SKIP_COMPONENTS2_NV -5 +#define GL_SKIP_COMPONENTS1_NV -6 +#endif + +#ifndef GL_EXT_bindable_uniform +#define GL_MAX_VERTEX_BINDABLE_UNIFORMS_EXT 0x8DE2 +#define GL_MAX_FRAGMENT_BINDABLE_UNIFORMS_EXT 0x8DE3 +#define GL_MAX_GEOMETRY_BINDABLE_UNIFORMS_EXT 0x8DE4 +#define GL_MAX_BINDABLE_UNIFORM_SIZE_EXT 0x8DED +#define GL_UNIFORM_BUFFER_EXT 0x8DEE +#define GL_UNIFORM_BUFFER_BINDING_EXT 0x8DEF +#endif + +#ifndef GL_EXT_texture_integer +#define GL_RGBA32UI_EXT 0x8D70 +#define GL_RGB32UI_EXT 0x8D71 +#define GL_ALPHA32UI_EXT 0x8D72 +#define GL_INTENSITY32UI_EXT 0x8D73 +#define GL_LUMINANCE32UI_EXT 0x8D74 +#define GL_LUMINANCE_ALPHA32UI_EXT 0x8D75 +#define GL_RGBA16UI_EXT 0x8D76 +#define GL_RGB16UI_EXT 0x8D77 +#define GL_ALPHA16UI_EXT 0x8D78 +#define GL_INTENSITY16UI_EXT 0x8D79 +#define GL_LUMINANCE16UI_EXT 0x8D7A +#define GL_LUMINANCE_ALPHA16UI_EXT 0x8D7B +#define GL_RGBA8UI_EXT 0x8D7C +#define GL_RGB8UI_EXT 0x8D7D +#define GL_ALPHA8UI_EXT 0x8D7E +#define GL_INTENSITY8UI_EXT 0x8D7F +#define GL_LUMINANCE8UI_EXT 0x8D80 +#define GL_LUMINANCE_ALPHA8UI_EXT 0x8D81 +#define GL_RGBA32I_EXT 0x8D82 +#define GL_RGB32I_EXT 0x8D83 +#define GL_ALPHA32I_EXT 0x8D84 +#define GL_INTENSITY32I_EXT 0x8D85 +#define GL_LUMINANCE32I_EXT 0x8D86 +#define GL_LUMINANCE_ALPHA32I_EXT 0x8D87 +#define GL_RGBA16I_EXT 0x8D88 +#define GL_RGB16I_EXT 0x8D89 +#define GL_ALPHA16I_EXT 0x8D8A +#define GL_INTENSITY16I_EXT 0x8D8B +#define GL_LUMINANCE16I_EXT 0x8D8C +#define GL_LUMINANCE_ALPHA16I_EXT 0x8D8D +#define GL_RGBA8I_EXT 0x8D8E +#define GL_RGB8I_EXT 0x8D8F +#define GL_ALPHA8I_EXT 0x8D90 +#define GL_INTENSITY8I_EXT 0x8D91 +#define GL_LUMINANCE8I_EXT 0x8D92 +#define GL_LUMINANCE_ALPHA8I_EXT 0x8D93 +#define GL_RED_INTEGER_EXT 0x8D94 +#define GL_GREEN_INTEGER_EXT 0x8D95 +#define GL_BLUE_INTEGER_EXT 0x8D96 +#define GL_ALPHA_INTEGER_EXT 0x8D97 +#define GL_RGB_INTEGER_EXT 0x8D98 +#define GL_RGBA_INTEGER_EXT 0x8D99 +#define GL_BGR_INTEGER_EXT 0x8D9A +#define GL_BGRA_INTEGER_EXT 0x8D9B +#define GL_LUMINANCE_INTEGER_EXT 0x8D9C +#define GL_LUMINANCE_ALPHA_INTEGER_EXT 0x8D9D +#define GL_RGBA_INTEGER_MODE_EXT 0x8D9E +#endif + +#ifndef GL_GREMEDY_frame_terminator +#endif + +#ifndef GL_NV_conditional_render +#define GL_QUERY_WAIT_NV 0x8E13 +#define GL_QUERY_NO_WAIT_NV 0x8E14 +#define GL_QUERY_BY_REGION_WAIT_NV 0x8E15 +#define GL_QUERY_BY_REGION_NO_WAIT_NV 0x8E16 +#endif + +#ifndef GL_NV_present_video +#define GL_FRAME_NV 0x8E26 +#define GL_FIELDS_NV 0x8E27 +#define GL_CURRENT_TIME_NV 0x8E28 +#define GL_NUM_FILL_STREAMS_NV 0x8E29 +#define GL_PRESENT_TIME_NV 0x8E2A +#define GL_PRESENT_DURATION_NV 0x8E2B +#endif + +#ifndef GL_EXT_transform_feedback +#define GL_TRANSFORM_FEEDBACK_BUFFER_EXT 0x8C8E +#define GL_TRANSFORM_FEEDBACK_BUFFER_START_EXT 0x8C84 +#define GL_TRANSFORM_FEEDBACK_BUFFER_SIZE_EXT 0x8C85 +#define GL_TRANSFORM_FEEDBACK_BUFFER_BINDING_EXT 0x8C8F +#define GL_INTERLEAVED_ATTRIBS_EXT 0x8C8C +#define GL_SEPARATE_ATTRIBS_EXT 0x8C8D +#define GL_PRIMITIVES_GENERATED_EXT 0x8C87 +#define GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN_EXT 0x8C88 +#define GL_RASTERIZER_DISCARD_EXT 0x8C89 +#define GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS_EXT 0x8C8A +#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS_EXT 0x8C8B +#define GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS_EXT 0x8C80 +#define GL_TRANSFORM_FEEDBACK_VARYINGS_EXT 0x8C83 +#define GL_TRANSFORM_FEEDBACK_BUFFER_MODE_EXT 0x8C7F +#define GL_TRANSFORM_FEEDBACK_VARYING_MAX_LENGTH_EXT 0x8C76 +#endif + +#ifndef GL_EXT_direct_state_access +#define GL_PROGRAM_MATRIX_EXT 0x8E2D +#define GL_TRANSPOSE_PROGRAM_MATRIX_EXT 0x8E2E +#define GL_PROGRAM_MATRIX_STACK_DEPTH_EXT 0x8E2F +#endif + +#ifndef GL_EXT_vertex_array_bgra +/* reuse GL_BGRA */ +#endif + +#ifndef GL_EXT_texture_swizzle +#define GL_TEXTURE_SWIZZLE_R_EXT 0x8E42 +#define GL_TEXTURE_SWIZZLE_G_EXT 0x8E43 +#define GL_TEXTURE_SWIZZLE_B_EXT 0x8E44 +#define GL_TEXTURE_SWIZZLE_A_EXT 0x8E45 +#define GL_TEXTURE_SWIZZLE_RGBA_EXT 0x8E46 +#endif + +#ifndef GL_NV_explicit_multisample +#define GL_SAMPLE_POSITION_NV 0x8E50 +#define GL_SAMPLE_MASK_NV 0x8E51 +#define GL_SAMPLE_MASK_VALUE_NV 0x8E52 +#define GL_TEXTURE_BINDING_RENDERBUFFER_NV 0x8E53 +#define GL_TEXTURE_RENDERBUFFER_DATA_STORE_BINDING_NV 0x8E54 +#define GL_TEXTURE_RENDERBUFFER_NV 0x8E55 +#define GL_SAMPLER_RENDERBUFFER_NV 0x8E56 +#define GL_INT_SAMPLER_RENDERBUFFER_NV 0x8E57 +#define GL_UNSIGNED_INT_SAMPLER_RENDERBUFFER_NV 0x8E58 +#define GL_MAX_SAMPLE_MASK_WORDS_NV 0x8E59 +#endif + +#ifndef GL_NV_transform_feedback2 +#define GL_TRANSFORM_FEEDBACK_NV 0x8E22 +#define GL_TRANSFORM_FEEDBACK_BUFFER_PAUSED_NV 0x8E23 +#define GL_TRANSFORM_FEEDBACK_BUFFER_ACTIVE_NV 0x8E24 +#define GL_TRANSFORM_FEEDBACK_BINDING_NV 0x8E25 +#endif + +#ifndef GL_ATI_meminfo +#define GL_VBO_FREE_MEMORY_ATI 0x87FB +#define GL_TEXTURE_FREE_MEMORY_ATI 0x87FC +#define GL_RENDERBUFFER_FREE_MEMORY_ATI 0x87FD +#endif + +#ifndef GL_AMD_performance_monitor +#define GL_COUNTER_TYPE_AMD 0x8BC0 +#define GL_COUNTER_RANGE_AMD 0x8BC1 +#define GL_UNSIGNED_INT64_AMD 0x8BC2 +#define GL_PERCENTAGE_AMD 0x8BC3 +#define GL_PERFMON_RESULT_AVAILABLE_AMD 0x8BC4 +#define GL_PERFMON_RESULT_SIZE_AMD 0x8BC5 +#define GL_PERFMON_RESULT_AMD 0x8BC6 +#endif + +#ifndef GL_AMD_texture_texture4 +#endif + +#ifndef GL_AMD_vertex_shader_tesselator +#define GL_SAMPLER_BUFFER_AMD 0x9001 +#define GL_INT_SAMPLER_BUFFER_AMD 0x9002 +#define GL_UNSIGNED_INT_SAMPLER_BUFFER_AMD 0x9003 +#define GL_TESSELLATION_MODE_AMD 0x9004 +#define GL_TESSELLATION_FACTOR_AMD 0x9005 +#define GL_DISCRETE_AMD 0x9006 +#define GL_CONTINUOUS_AMD 0x9007 +#endif + +#ifndef GL_EXT_provoking_vertex +#define GL_QUADS_FOLLOW_PROVOKING_VERTEX_CONVENTION_EXT 0x8E4C +#define GL_FIRST_VERTEX_CONVENTION_EXT 0x8E4D +#define GL_LAST_VERTEX_CONVENTION_EXT 0x8E4E +#define GL_PROVOKING_VERTEX_EXT 0x8E4F +#endif + +#ifndef GL_EXT_texture_snorm +#define GL_ALPHA_SNORM 0x9010 +#define GL_LUMINANCE_SNORM 0x9011 +#define GL_LUMINANCE_ALPHA_SNORM 0x9012 +#define GL_INTENSITY_SNORM 0x9013 +#define GL_ALPHA8_SNORM 0x9014 +#define GL_LUMINANCE8_SNORM 0x9015 +#define GL_LUMINANCE8_ALPHA8_SNORM 0x9016 +#define GL_INTENSITY8_SNORM 0x9017 +#define GL_ALPHA16_SNORM 0x9018 +#define GL_LUMINANCE16_SNORM 0x9019 +#define GL_LUMINANCE16_ALPHA16_SNORM 0x901A +#define GL_INTENSITY16_SNORM 0x901B +/* reuse GL_RED_SNORM */ +/* reuse GL_RG_SNORM */ +/* reuse GL_RGB_SNORM */ +/* reuse GL_RGBA_SNORM */ +/* reuse GL_R8_SNORM */ +/* reuse GL_RG8_SNORM */ +/* reuse GL_RGB8_SNORM */ +/* reuse GL_RGBA8_SNORM */ +/* reuse GL_R16_SNORM */ +/* reuse GL_RG16_SNORM */ +/* reuse GL_RGB16_SNORM */ +/* reuse GL_RGBA16_SNORM */ +/* reuse GL_SIGNED_NORMALIZED */ +#endif + +#ifndef GL_AMD_draw_buffers_blend +#endif + +#ifndef GL_APPLE_texture_range +#define GL_TEXTURE_RANGE_LENGTH_APPLE 0x85B7 +#define GL_TEXTURE_RANGE_POINTER_APPLE 0x85B8 +#define GL_TEXTURE_STORAGE_HINT_APPLE 0x85BC +#define GL_STORAGE_PRIVATE_APPLE 0x85BD +/* reuse GL_STORAGE_CACHED_APPLE */ +/* reuse GL_STORAGE_SHARED_APPLE */ +#endif + +#ifndef GL_APPLE_float_pixels +#define GL_HALF_APPLE 0x140B +#define GL_RGBA_FLOAT32_APPLE 0x8814 +#define GL_RGB_FLOAT32_APPLE 0x8815 +#define GL_ALPHA_FLOAT32_APPLE 0x8816 +#define GL_INTENSITY_FLOAT32_APPLE 0x8817 +#define GL_LUMINANCE_FLOAT32_APPLE 0x8818 +#define GL_LUMINANCE_ALPHA_FLOAT32_APPLE 0x8819 +#define GL_RGBA_FLOAT16_APPLE 0x881A +#define GL_RGB_FLOAT16_APPLE 0x881B +#define GL_ALPHA_FLOAT16_APPLE 0x881C +#define GL_INTENSITY_FLOAT16_APPLE 0x881D +#define GL_LUMINANCE_FLOAT16_APPLE 0x881E +#define GL_LUMINANCE_ALPHA_FLOAT16_APPLE 0x881F +#define GL_COLOR_FLOAT_APPLE 0x8A0F +#endif + +#ifndef GL_APPLE_vertex_program_evaluators +#define GL_VERTEX_ATTRIB_MAP1_APPLE 0x8A00 +#define GL_VERTEX_ATTRIB_MAP2_APPLE 0x8A01 +#define GL_VERTEX_ATTRIB_MAP1_SIZE_APPLE 0x8A02 +#define GL_VERTEX_ATTRIB_MAP1_COEFF_APPLE 0x8A03 +#define GL_VERTEX_ATTRIB_MAP1_ORDER_APPLE 0x8A04 +#define GL_VERTEX_ATTRIB_MAP1_DOMAIN_APPLE 0x8A05 +#define GL_VERTEX_ATTRIB_MAP2_SIZE_APPLE 0x8A06 +#define GL_VERTEX_ATTRIB_MAP2_COEFF_APPLE 0x8A07 +#define GL_VERTEX_ATTRIB_MAP2_ORDER_APPLE 0x8A08 +#define GL_VERTEX_ATTRIB_MAP2_DOMAIN_APPLE 0x8A09 +#endif + +#ifndef GL_APPLE_aux_depth_stencil +#define GL_AUX_DEPTH_STENCIL_APPLE 0x8A14 +#endif + +#ifndef GL_APPLE_object_purgeable +#define GL_BUFFER_OBJECT_APPLE 0x85B3 +#define GL_RELEASED_APPLE 0x8A19 +#define GL_VOLATILE_APPLE 0x8A1A +#define GL_RETAINED_APPLE 0x8A1B +#define GL_UNDEFINED_APPLE 0x8A1C +#define GL_PURGEABLE_APPLE 0x8A1D +#endif + +#ifndef GL_APPLE_row_bytes +#define GL_PACK_ROW_BYTES_APPLE 0x8A15 +#define GL_UNPACK_ROW_BYTES_APPLE 0x8A16 +#endif + +#ifndef GL_APPLE_rgb_422 +#define GL_RGB_422_APPLE 0x8A1F +/* reuse GL_UNSIGNED_SHORT_8_8_APPLE */ +/* reuse GL_UNSIGNED_SHORT_8_8_REV_APPLE */ +#endif + +#ifndef GL_NV_video_capture +#define GL_VIDEO_BUFFER_NV 0x9020 +#define GL_VIDEO_BUFFER_BINDING_NV 0x9021 +#define GL_FIELD_UPPER_NV 0x9022 +#define GL_FIELD_LOWER_NV 0x9023 +#define GL_NUM_VIDEO_CAPTURE_STREAMS_NV 0x9024 +#define GL_NEXT_VIDEO_CAPTURE_BUFFER_STATUS_NV 0x9025 +#define GL_VIDEO_CAPTURE_TO_422_SUPPORTED_NV 0x9026 +#define GL_LAST_VIDEO_CAPTURE_STATUS_NV 0x9027 +#define GL_VIDEO_BUFFER_PITCH_NV 0x9028 +#define GL_VIDEO_COLOR_CONVERSION_MATRIX_NV 0x9029 +#define GL_VIDEO_COLOR_CONVERSION_MAX_NV 0x902A +#define GL_VIDEO_COLOR_CONVERSION_MIN_NV 0x902B +#define GL_VIDEO_COLOR_CONVERSION_OFFSET_NV 0x902C +#define GL_VIDEO_BUFFER_INTERNAL_FORMAT_NV 0x902D +#define GL_PARTIAL_SUCCESS_NV 0x902E +#define GL_SUCCESS_NV 0x902F +#define GL_FAILURE_NV 0x9030 +#define GL_YCBYCR8_422_NV 0x9031 +#define GL_YCBAYCR8A_4224_NV 0x9032 +#define GL_Z6Y10Z6CB10Z6Y10Z6CR10_422_NV 0x9033 +#define GL_Z6Y10Z6CB10Z6A10Z6Y10Z6CR10Z6A10_4224_NV 0x9034 +#define GL_Z4Y12Z4CB12Z4Y12Z4CR12_422_NV 0x9035 +#define GL_Z4Y12Z4CB12Z4A12Z4Y12Z4CR12Z4A12_4224_NV 0x9036 +#define GL_Z4Y12Z4CB12Z4CR12_444_NV 0x9037 +#define GL_VIDEO_CAPTURE_FRAME_WIDTH_NV 0x9038 +#define GL_VIDEO_CAPTURE_FRAME_HEIGHT_NV 0x9039 +#define GL_VIDEO_CAPTURE_FIELD_UPPER_HEIGHT_NV 0x903A +#define GL_VIDEO_CAPTURE_FIELD_LOWER_HEIGHT_NV 0x903B +#define GL_VIDEO_CAPTURE_SURFACE_ORIGIN_NV 0x903C +#endif + +#ifndef GL_NV_copy_image +#endif + +#ifndef GL_EXT_separate_shader_objects +#define GL_ACTIVE_PROGRAM_EXT 0x8B8D +#endif + +#ifndef GL_NV_parameter_buffer_object2 +#endif + +#ifndef GL_NV_shader_buffer_load +#define GL_BUFFER_GPU_ADDRESS_NV 0x8F1D +#define GL_GPU_ADDRESS_NV 0x8F34 +#define GL_MAX_SHADER_BUFFER_ADDRESS_NV 0x8F35 +#endif + +#ifndef GL_NV_vertex_buffer_unified_memory +#define GL_VERTEX_ATTRIB_ARRAY_UNIFIED_NV 0x8F1E +#define GL_ELEMENT_ARRAY_UNIFIED_NV 0x8F1F +#define GL_VERTEX_ATTRIB_ARRAY_ADDRESS_NV 0x8F20 +#define GL_VERTEX_ARRAY_ADDRESS_NV 0x8F21 +#define GL_NORMAL_ARRAY_ADDRESS_NV 0x8F22 +#define GL_COLOR_ARRAY_ADDRESS_NV 0x8F23 +#define GL_INDEX_ARRAY_ADDRESS_NV 0x8F24 +#define GL_TEXTURE_COORD_ARRAY_ADDRESS_NV 0x8F25 +#define GL_EDGE_FLAG_ARRAY_ADDRESS_NV 0x8F26 +#define GL_SECONDARY_COLOR_ARRAY_ADDRESS_NV 0x8F27 +#define GL_FOG_COORD_ARRAY_ADDRESS_NV 0x8F28 +#define GL_ELEMENT_ARRAY_ADDRESS_NV 0x8F29 +#define GL_VERTEX_ATTRIB_ARRAY_LENGTH_NV 0x8F2A +#define GL_VERTEX_ARRAY_LENGTH_NV 0x8F2B +#define GL_NORMAL_ARRAY_LENGTH_NV 0x8F2C +#define GL_COLOR_ARRAY_LENGTH_NV 0x8F2D +#define GL_INDEX_ARRAY_LENGTH_NV 0x8F2E +#define GL_TEXTURE_COORD_ARRAY_LENGTH_NV 0x8F2F +#define GL_EDGE_FLAG_ARRAY_LENGTH_NV 0x8F30 +#define GL_SECONDARY_COLOR_ARRAY_LENGTH_NV 0x8F31 +#define GL_FOG_COORD_ARRAY_LENGTH_NV 0x8F32 +#define GL_ELEMENT_ARRAY_LENGTH_NV 0x8F33 +#define GL_DRAW_INDIRECT_UNIFIED_NV 0x8F40 +#define GL_DRAW_INDIRECT_ADDRESS_NV 0x8F41 +#define GL_DRAW_INDIRECT_LENGTH_NV 0x8F42 +#endif + +#ifndef GL_NV_texture_barrier +#endif + +#ifndef GL_AMD_shader_stencil_export +#endif + +#ifndef GL_AMD_seamless_cubemap_per_texture +/* reuse GL_TEXTURE_CUBE_MAP_SEAMLESS_ARB */ +#endif + +#ifndef GL_AMD_conservative_depth +#endif + +#ifndef GL_EXT_shader_image_load_store +#define GL_MAX_IMAGE_UNITS_EXT 0x8F38 +#define GL_MAX_COMBINED_IMAGE_UNITS_AND_FRAGMENT_OUTPUTS_EXT 0x8F39 +#define GL_IMAGE_BINDING_NAME_EXT 0x8F3A +#define GL_IMAGE_BINDING_LEVEL_EXT 0x8F3B +#define GL_IMAGE_BINDING_LAYERED_EXT 0x8F3C +#define GL_IMAGE_BINDING_LAYER_EXT 0x8F3D +#define GL_IMAGE_BINDING_ACCESS_EXT 0x8F3E +#define GL_IMAGE_1D_EXT 0x904C +#define GL_IMAGE_2D_EXT 0x904D +#define GL_IMAGE_3D_EXT 0x904E +#define GL_IMAGE_2D_RECT_EXT 0x904F +#define GL_IMAGE_CUBE_EXT 0x9050 +#define GL_IMAGE_BUFFER_EXT 0x9051 +#define GL_IMAGE_1D_ARRAY_EXT 0x9052 +#define GL_IMAGE_2D_ARRAY_EXT 0x9053 +#define GL_IMAGE_CUBE_MAP_ARRAY_EXT 0x9054 +#define GL_IMAGE_2D_MULTISAMPLE_EXT 0x9055 +#define GL_IMAGE_2D_MULTISAMPLE_ARRAY_EXT 0x9056 +#define GL_INT_IMAGE_1D_EXT 0x9057 +#define GL_INT_IMAGE_2D_EXT 0x9058 +#define GL_INT_IMAGE_3D_EXT 0x9059 +#define GL_INT_IMAGE_2D_RECT_EXT 0x905A +#define GL_INT_IMAGE_CUBE_EXT 0x905B +#define GL_INT_IMAGE_BUFFER_EXT 0x905C +#define GL_INT_IMAGE_1D_ARRAY_EXT 0x905D +#define GL_INT_IMAGE_2D_ARRAY_EXT 0x905E +#define GL_INT_IMAGE_CUBE_MAP_ARRAY_EXT 0x905F +#define GL_INT_IMAGE_2D_MULTISAMPLE_EXT 0x9060 +#define GL_INT_IMAGE_2D_MULTISAMPLE_ARRAY_EXT 0x9061 +#define GL_UNSIGNED_INT_IMAGE_1D_EXT 0x9062 +#define GL_UNSIGNED_INT_IMAGE_2D_EXT 0x9063 +#define GL_UNSIGNED_INT_IMAGE_3D_EXT 0x9064 +#define GL_UNSIGNED_INT_IMAGE_2D_RECT_EXT 0x9065 +#define GL_UNSIGNED_INT_IMAGE_CUBE_EXT 0x9066 +#define GL_UNSIGNED_INT_IMAGE_BUFFER_EXT 0x9067 +#define GL_UNSIGNED_INT_IMAGE_1D_ARRAY_EXT 0x9068 +#define GL_UNSIGNED_INT_IMAGE_2D_ARRAY_EXT 0x9069 +#define GL_UNSIGNED_INT_IMAGE_CUBE_MAP_ARRAY_EXT 0x906A +#define GL_UNSIGNED_INT_IMAGE_2D_MULTISAMPLE_EXT 0x906B +#define GL_UNSIGNED_INT_IMAGE_2D_MULTISAMPLE_ARRAY_EXT 0x906C +#define GL_MAX_IMAGE_SAMPLES_EXT 0x906D +#define GL_IMAGE_BINDING_FORMAT_EXT 0x906E +#define GL_VERTEX_ATTRIB_ARRAY_BARRIER_BIT_EXT 0x00000001 +#define GL_ELEMENT_ARRAY_BARRIER_BIT_EXT 0x00000002 +#define GL_UNIFORM_BARRIER_BIT_EXT 0x00000004 +#define GL_TEXTURE_FETCH_BARRIER_BIT_EXT 0x00000008 +#define GL_SHADER_IMAGE_ACCESS_BARRIER_BIT_EXT 0x00000020 +#define GL_COMMAND_BARRIER_BIT_EXT 0x00000040 +#define GL_PIXEL_BUFFER_BARRIER_BIT_EXT 0x00000080 +#define GL_TEXTURE_UPDATE_BARRIER_BIT_EXT 0x00000100 +#define GL_BUFFER_UPDATE_BARRIER_BIT_EXT 0x00000200 +#define GL_FRAMEBUFFER_BARRIER_BIT_EXT 0x00000400 +#define GL_TRANSFORM_FEEDBACK_BARRIER_BIT_EXT 0x00000800 +#define GL_ATOMIC_COUNTER_BARRIER_BIT_EXT 0x00001000 +#define GL_ALL_BARRIER_BITS_EXT 0xFFFFFFFF +#endif + +#ifndef GL_EXT_vertex_attrib_64bit +/* reuse GL_DOUBLE */ +#define GL_DOUBLE_VEC2_EXT 0x8FFC +#define GL_DOUBLE_VEC3_EXT 0x8FFD +#define GL_DOUBLE_VEC4_EXT 0x8FFE +#define GL_DOUBLE_MAT2_EXT 0x8F46 +#define GL_DOUBLE_MAT3_EXT 0x8F47 +#define GL_DOUBLE_MAT4_EXT 0x8F48 +#define GL_DOUBLE_MAT2x3_EXT 0x8F49 +#define GL_DOUBLE_MAT2x4_EXT 0x8F4A +#define GL_DOUBLE_MAT3x2_EXT 0x8F4B +#define GL_DOUBLE_MAT3x4_EXT 0x8F4C +#define GL_DOUBLE_MAT4x2_EXT 0x8F4D +#define GL_DOUBLE_MAT4x3_EXT 0x8F4E +#endif + +#ifndef GL_NV_gpu_program5 +#define GL_MAX_GEOMETRY_PROGRAM_INVOCATIONS_NV 0x8E5A +#define GL_MIN_FRAGMENT_INTERPOLATION_OFFSET_NV 0x8E5B +#define GL_MAX_FRAGMENT_INTERPOLATION_OFFSET_NV 0x8E5C +#define GL_FRAGMENT_PROGRAM_INTERPOLATION_OFFSET_BITS_NV 0x8E5D +#define GL_MAX_PROGRAM_SUBROUTINE_PARAMETERS_NV 0x8F44 +#define GL_MAX_PROGRAM_SUBROUTINE_NUM_NV 0x8F45 +#endif + +#ifndef GL_NV_gpu_shader5 +#define GL_INT64_NV 0x140E +#define GL_UNSIGNED_INT64_NV 0x140F +#define GL_INT8_NV 0x8FE0 +#define GL_INT8_VEC2_NV 0x8FE1 +#define GL_INT8_VEC3_NV 0x8FE2 +#define GL_INT8_VEC4_NV 0x8FE3 +#define GL_INT16_NV 0x8FE4 +#define GL_INT16_VEC2_NV 0x8FE5 +#define GL_INT16_VEC3_NV 0x8FE6 +#define GL_INT16_VEC4_NV 0x8FE7 +#define GL_INT64_VEC2_NV 0x8FE9 +#define GL_INT64_VEC3_NV 0x8FEA +#define GL_INT64_VEC4_NV 0x8FEB +#define GL_UNSIGNED_INT8_NV 0x8FEC +#define GL_UNSIGNED_INT8_VEC2_NV 0x8FED +#define GL_UNSIGNED_INT8_VEC3_NV 0x8FEE +#define GL_UNSIGNED_INT8_VEC4_NV 0x8FEF +#define GL_UNSIGNED_INT16_NV 0x8FF0 +#define GL_UNSIGNED_INT16_VEC2_NV 0x8FF1 +#define GL_UNSIGNED_INT16_VEC3_NV 0x8FF2 +#define GL_UNSIGNED_INT16_VEC4_NV 0x8FF3 +#define GL_UNSIGNED_INT64_VEC2_NV 0x8FF5 +#define GL_UNSIGNED_INT64_VEC3_NV 0x8FF6 +#define GL_UNSIGNED_INT64_VEC4_NV 0x8FF7 +#define GL_FLOAT16_NV 0x8FF8 +#define GL_FLOAT16_VEC2_NV 0x8FF9 +#define GL_FLOAT16_VEC3_NV 0x8FFA +#define GL_FLOAT16_VEC4_NV 0x8FFB +/* reuse GL_PATCHES */ +#endif + +#ifndef GL_NV_shader_buffer_store +#define GL_SHADER_GLOBAL_ACCESS_BARRIER_BIT_NV 0x00000010 +/* reuse GL_READ_WRITE */ +/* reuse GL_WRITE_ONLY */ +#endif + +#ifndef GL_NV_tessellation_program5 +#define GL_MAX_PROGRAM_PATCH_ATTRIBS_NV 0x86D8 +#define GL_TESS_CONTROL_PROGRAM_NV 0x891E +#define GL_TESS_EVALUATION_PROGRAM_NV 0x891F +#define GL_TESS_CONTROL_PROGRAM_PARAMETER_BUFFER_NV 0x8C74 +#define GL_TESS_EVALUATION_PROGRAM_PARAMETER_BUFFER_NV 0x8C75 +#endif + +#ifndef GL_NV_vertex_attrib_integer_64bit +/* reuse GL_INT64_NV */ +/* reuse GL_UNSIGNED_INT64_NV */ +#endif + +#ifndef GL_NV_multisample_coverage +#define GL_COVERAGE_SAMPLES_NV 0x80A9 +#define GL_COLOR_SAMPLES_NV 0x8E20 +#endif + +#ifndef GL_AMD_name_gen_delete +#define GL_DATA_BUFFER_AMD 0x9151 +#define GL_PERFORMANCE_MONITOR_AMD 0x9152 +#define GL_QUERY_OBJECT_AMD 0x9153 +#define GL_VERTEX_ARRAY_OBJECT_AMD 0x9154 +#define GL_SAMPLER_OBJECT_AMD 0x9155 +#endif + +#ifndef GL_AMD_debug_output +#define GL_MAX_DEBUG_LOGGED_MESSAGES_AMD 0x9144 +#define GL_DEBUG_LOGGED_MESSAGES_AMD 0x9145 +#define GL_DEBUG_SEVERITY_HIGH_AMD 0x9146 +#define GL_DEBUG_SEVERITY_MEDIUM_AMD 0x9147 +#define GL_DEBUG_SEVERITY_LOW_AMD 0x9148 +#define GL_DEBUG_CATEGORY_API_ERROR_AMD 0x9149 +#define GL_DEBUG_CATEGORY_WINDOW_SYSTEM_AMD 0x914A +#define GL_DEBUG_CATEGORY_DEPRECATION_AMD 0x914B +#define GL_DEBUG_CATEGORY_UNDEFINED_BEHAVIOR_AMD 0x914C +#define GL_DEBUG_CATEGORY_PERFORMANCE_AMD 0x914D +#define GL_DEBUG_CATEGORY_SHADER_COMPILER_AMD 0x914E +#define GL_DEBUG_CATEGORY_APPLICATION_AMD 0x914F +#define GL_DEBUG_CATEGORY_OTHER_AMD 0x9150 +#endif + +#ifndef GL_NV_vdpau_interop +#define GL_SURFACE_STATE_NV 0x86EB +#define GL_SURFACE_REGISTERED_NV 0x86FD +#define GL_SURFACE_MAPPED_NV 0x8700 +#define GL_WRITE_DISCARD_NV 0x88BE +#endif + +#ifndef GL_AMD_transform_feedback3_lines_triangles +#endif + + +/*************************************************************/ + +#include +#ifndef GL_VERSION_2_0 +/* GL type for program/shader text */ +typedef char GLchar; +#endif + +#ifndef GL_VERSION_1_5 +/* GL types for handling large vertex buffer objects */ +#if defined(__APPLE__) +typedef long GLintptr; +typedef long GLsizeiptr; +#else +typedef ptrdiff_t GLintptr; +typedef ptrdiff_t GLsizeiptr; +#endif +#endif + +#ifndef GL_ARB_vertex_buffer_object +/* GL types for handling large vertex buffer objects */ +#if defined(__APPLE__) +typedef long GLintptrARB; +typedef long GLsizeiptrARB; +#else +typedef ptrdiff_t GLintptrARB; +typedef ptrdiff_t GLsizeiptrARB; +#endif +#endif + +#ifndef GL_ARB_shader_objects +/* GL types for program/shader text and shader object handles */ +typedef char GLcharARB; +#if defined(__APPLE__) +typedef void *GLhandleARB; +#else +typedef unsigned int GLhandleARB; +#endif +#endif + +/* GL type for "half" precision (s10e5) float data in host memory */ +#ifndef GL_ARB_half_float_pixel +typedef unsigned short GLhalfARB; +#endif + +#ifndef GL_NV_half_float +typedef unsigned short GLhalfNV; +#endif + +#ifndef GLEXT_64_TYPES_DEFINED +/* This code block is duplicated in glxext.h, so must be protected */ +#define GLEXT_64_TYPES_DEFINED +/* Define int32_t, int64_t, and uint64_t types for UST/MSC */ +/* (as used in the GL_EXT_timer_query extension). */ +#if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L +#include +#elif defined(__sun__) || defined(__digital__) +#include +#if defined(__STDC__) +#if defined(__arch64__) || defined(_LP64) +typedef long int int64_t; +typedef unsigned long int uint64_t; +#else +typedef long long int int64_t; +typedef unsigned long long int uint64_t; +#endif /* __arch64__ */ +#endif /* __STDC__ */ +#elif defined( __VMS ) || defined(__sgi) +#include +#elif defined(__SCO__) || defined(__USLC__) +#include +#elif defined(__UNIXOS2__) || defined(__SOL64__) +typedef long int int32_t; +typedef long long int int64_t; +typedef unsigned long long int uint64_t; +#elif defined(_WIN32) && defined(__GNUC__) +#include +#elif defined(_WIN32) +typedef __int32 int32_t; +typedef __int64 int64_t; +typedef unsigned __int64 uint64_t; +#else +/* Fallback if nothing above works */ +#include +#endif +#endif + +#ifndef GL_EXT_timer_query +typedef int64_t GLint64EXT; +typedef uint64_t GLuint64EXT; +#endif + +#ifndef GL_ARB_sync +typedef int64_t GLint64; +typedef uint64_t GLuint64; +typedef struct __GLsync *GLsync; +#endif + +#ifndef GL_ARB_cl_event +/* These incomplete types let us declare types compatible with OpenCL's cl_context and cl_event */ +struct _cl_context; +struct _cl_event; +#endif + +#ifndef GL_ARB_debug_output +typedef void (APIENTRY *GLDEBUGPROCARB)(GLenum source,GLenum type,GLuint id,GLenum severity,GLsizei length,const GLchar *message,GLvoid *userParam); +#endif + +#ifndef GL_AMD_debug_output +typedef void (APIENTRY *GLDEBUGPROCAMD)(GLuint id,GLenum category,GLenum severity,GLsizei length,const GLchar *message,GLvoid *userParam); +#endif + +#ifndef GL_NV_vdpau_interop +typedef GLintptr GLvdpauSurfaceNV; +#endif + +#ifndef GL_VERSION_1_2 +#define GL_VERSION_1_2 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBlendColor (GLclampf red, GLclampf green, GLclampf blue, GLclampf alpha); +GLAPI void APIENTRY glBlendEquation (GLenum mode); +GLAPI void APIENTRY glDrawRangeElements (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices); +GLAPI void APIENTRY glTexImage3D (GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glCopyTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBLENDCOLORPROC) (GLclampf red, GLclampf green, GLclampf blue, GLclampf alpha); +typedef void (APIENTRYP PFNGLBLENDEQUATIONPROC) (GLenum mode); +typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTSPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices); +typedef void (APIENTRYP PFNGLTEXIMAGE3DPROC) (GLenum target, GLint level, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLTEXSUBIMAGE3DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE3DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height); +#endif + +#ifndef GL_VERSION_1_2_DEPRECATED +#define GL_VERSION_1_2_DEPRECATED 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glColorTable (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *table); +GLAPI void APIENTRY glColorTableParameterfv (GLenum target, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glColorTableParameteriv (GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glCopyColorTable (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width); +GLAPI void APIENTRY glGetColorTable (GLenum target, GLenum format, GLenum type, GLvoid *table); +GLAPI void APIENTRY glGetColorTableParameterfv (GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetColorTableParameteriv (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glColorSubTable (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const GLvoid *data); +GLAPI void APIENTRY glCopyColorSubTable (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width); +GLAPI void APIENTRY glConvolutionFilter1D (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *image); +GLAPI void APIENTRY glConvolutionFilter2D (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *image); +GLAPI void APIENTRY glConvolutionParameterf (GLenum target, GLenum pname, GLfloat params); +GLAPI void APIENTRY glConvolutionParameterfv (GLenum target, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glConvolutionParameteri (GLenum target, GLenum pname, GLint params); +GLAPI void APIENTRY glConvolutionParameteriv (GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glCopyConvolutionFilter1D (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width); +GLAPI void APIENTRY glCopyConvolutionFilter2D (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height); +GLAPI void APIENTRY glGetConvolutionFilter (GLenum target, GLenum format, GLenum type, GLvoid *image); +GLAPI void APIENTRY glGetConvolutionParameterfv (GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetConvolutionParameteriv (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetSeparableFilter (GLenum target, GLenum format, GLenum type, GLvoid *row, GLvoid *column, GLvoid *span); +GLAPI void APIENTRY glSeparableFilter2D (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *row, const GLvoid *column); +GLAPI void APIENTRY glGetHistogram (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values); +GLAPI void APIENTRY glGetHistogramParameterfv (GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetHistogramParameteriv (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetMinmax (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values); +GLAPI void APIENTRY glGetMinmaxParameterfv (GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetMinmaxParameteriv (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glHistogram (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink); +GLAPI void APIENTRY glMinmax (GLenum target, GLenum internalformat, GLboolean sink); +GLAPI void APIENTRY glResetHistogram (GLenum target); +GLAPI void APIENTRY glResetMinmax (GLenum target); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOLORTABLEPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *table); +typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERFVPROC) (GLenum target, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERIVPROC) (GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLCOPYCOLORTABLEPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width); +typedef void (APIENTRYP PFNGLGETCOLORTABLEPROC) (GLenum target, GLenum format, GLenum type, GLvoid *table); +typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLCOLORSUBTABLEPROC) (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOPYCOLORSUBTABLEPROC) (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width); +typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER1DPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *image); +typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER2DPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *image); +typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFPROC) (GLenum target, GLenum pname, GLfloat params); +typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFVPROC) (GLenum target, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIPROC) (GLenum target, GLenum pname, GLint params); +typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIVPROC) (GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER1DPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width); +typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER2DPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLGETCONVOLUTIONFILTERPROC) (GLenum target, GLenum format, GLenum type, GLvoid *image); +typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETSEPARABLEFILTERPROC) (GLenum target, GLenum format, GLenum type, GLvoid *row, GLvoid *column, GLvoid *span); +typedef void (APIENTRYP PFNGLSEPARABLEFILTER2DPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *row, const GLvoid *column); +typedef void (APIENTRYP PFNGLGETHISTOGRAMPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values); +typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETMINMAXPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values); +typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERFVPROC) (GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLHISTOGRAMPROC) (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink); +typedef void (APIENTRYP PFNGLMINMAXPROC) (GLenum target, GLenum internalformat, GLboolean sink); +typedef void (APIENTRYP PFNGLRESETHISTOGRAMPROC) (GLenum target); +typedef void (APIENTRYP PFNGLRESETMINMAXPROC) (GLenum target); +#endif + +#ifndef GL_VERSION_1_3 +#define GL_VERSION_1_3 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glActiveTexture (GLenum texture); +GLAPI void APIENTRY glSampleCoverage (GLclampf value, GLboolean invert); +GLAPI void APIENTRY glCompressedTexImage3D (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glCompressedTexImage2D (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glCompressedTexImage1D (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glCompressedTexSubImage3D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glCompressedTexSubImage2D (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glCompressedTexSubImage1D (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glGetCompressedTexImage (GLenum target, GLint level, GLvoid *img); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLACTIVETEXTUREPROC) (GLenum texture); +typedef void (APIENTRYP PFNGLSAMPLECOVERAGEPROC) (GLclampf value, GLboolean invert); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE3DPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE2DPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE1DPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE3DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE2DPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE1DPROC) (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLGETCOMPRESSEDTEXIMAGEPROC) (GLenum target, GLint level, GLvoid *img); +#endif + +#ifndef GL_VERSION_1_3_DEPRECATED +#define GL_VERSION_1_3_DEPRECATED 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glClientActiveTexture (GLenum texture); +GLAPI void APIENTRY glMultiTexCoord1d (GLenum target, GLdouble s); +GLAPI void APIENTRY glMultiTexCoord1dv (GLenum target, const GLdouble *v); +GLAPI void APIENTRY glMultiTexCoord1f (GLenum target, GLfloat s); +GLAPI void APIENTRY glMultiTexCoord1fv (GLenum target, const GLfloat *v); +GLAPI void APIENTRY glMultiTexCoord1i (GLenum target, GLint s); +GLAPI void APIENTRY glMultiTexCoord1iv (GLenum target, const GLint *v); +GLAPI void APIENTRY glMultiTexCoord1s (GLenum target, GLshort s); +GLAPI void APIENTRY glMultiTexCoord1sv (GLenum target, const GLshort *v); +GLAPI void APIENTRY glMultiTexCoord2d (GLenum target, GLdouble s, GLdouble t); +GLAPI void APIENTRY glMultiTexCoord2dv (GLenum target, const GLdouble *v); +GLAPI void APIENTRY glMultiTexCoord2f (GLenum target, GLfloat s, GLfloat t); +GLAPI void APIENTRY glMultiTexCoord2fv (GLenum target, const GLfloat *v); +GLAPI void APIENTRY glMultiTexCoord2i (GLenum target, GLint s, GLint t); +GLAPI void APIENTRY glMultiTexCoord2iv (GLenum target, const GLint *v); +GLAPI void APIENTRY glMultiTexCoord2s (GLenum target, GLshort s, GLshort t); +GLAPI void APIENTRY glMultiTexCoord2sv (GLenum target, const GLshort *v); +GLAPI void APIENTRY glMultiTexCoord3d (GLenum target, GLdouble s, GLdouble t, GLdouble r); +GLAPI void APIENTRY glMultiTexCoord3dv (GLenum target, const GLdouble *v); +GLAPI void APIENTRY glMultiTexCoord3f (GLenum target, GLfloat s, GLfloat t, GLfloat r); +GLAPI void APIENTRY glMultiTexCoord3fv (GLenum target, const GLfloat *v); +GLAPI void APIENTRY glMultiTexCoord3i (GLenum target, GLint s, GLint t, GLint r); +GLAPI void APIENTRY glMultiTexCoord3iv (GLenum target, const GLint *v); +GLAPI void APIENTRY glMultiTexCoord3s (GLenum target, GLshort s, GLshort t, GLshort r); +GLAPI void APIENTRY glMultiTexCoord3sv (GLenum target, const GLshort *v); +GLAPI void APIENTRY glMultiTexCoord4d (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q); +GLAPI void APIENTRY glMultiTexCoord4dv (GLenum target, const GLdouble *v); +GLAPI void APIENTRY glMultiTexCoord4f (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q); +GLAPI void APIENTRY glMultiTexCoord4fv (GLenum target, const GLfloat *v); +GLAPI void APIENTRY glMultiTexCoord4i (GLenum target, GLint s, GLint t, GLint r, GLint q); +GLAPI void APIENTRY glMultiTexCoord4iv (GLenum target, const GLint *v); +GLAPI void APIENTRY glMultiTexCoord4s (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q); +GLAPI void APIENTRY glMultiTexCoord4sv (GLenum target, const GLshort *v); +GLAPI void APIENTRY glLoadTransposeMatrixf (const GLfloat *m); +GLAPI void APIENTRY glLoadTransposeMatrixd (const GLdouble *m); +GLAPI void APIENTRY glMultTransposeMatrixf (const GLfloat *m); +GLAPI void APIENTRY glMultTransposeMatrixd (const GLdouble *m); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCLIENTACTIVETEXTUREPROC) (GLenum texture); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1DPROC) (GLenum target, GLdouble s); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1DVPROC) (GLenum target, const GLdouble *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1FPROC) (GLenum target, GLfloat s); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1FVPROC) (GLenum target, const GLfloat *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1IPROC) (GLenum target, GLint s); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1IVPROC) (GLenum target, const GLint *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1SPROC) (GLenum target, GLshort s); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1SVPROC) (GLenum target, const GLshort *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2DPROC) (GLenum target, GLdouble s, GLdouble t); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2DVPROC) (GLenum target, const GLdouble *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2FPROC) (GLenum target, GLfloat s, GLfloat t); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2FVPROC) (GLenum target, const GLfloat *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2IPROC) (GLenum target, GLint s, GLint t); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2IVPROC) (GLenum target, const GLint *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2SPROC) (GLenum target, GLshort s, GLshort t); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2SVPROC) (GLenum target, const GLshort *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3DPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3DVPROC) (GLenum target, const GLdouble *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3FPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3FVPROC) (GLenum target, const GLfloat *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3IPROC) (GLenum target, GLint s, GLint t, GLint r); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3IVPROC) (GLenum target, const GLint *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3SPROC) (GLenum target, GLshort s, GLshort t, GLshort r); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3SVPROC) (GLenum target, const GLshort *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4DPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4DVPROC) (GLenum target, const GLdouble *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4FPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4FVPROC) (GLenum target, const GLfloat *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4IPROC) (GLenum target, GLint s, GLint t, GLint r, GLint q); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4IVPROC) (GLenum target, const GLint *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4SPROC) (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4SVPROC) (GLenum target, const GLshort *v); +typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXFPROC) (const GLfloat *m); +typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXDPROC) (const GLdouble *m); +typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXFPROC) (const GLfloat *m); +typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXDPROC) (const GLdouble *m); +#endif + +#ifndef GL_VERSION_1_4 +#define GL_VERSION_1_4 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBlendFuncSeparate (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha); +GLAPI void APIENTRY glMultiDrawArrays (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount); +GLAPI void APIENTRY glMultiDrawElements (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* *indices, GLsizei primcount); +GLAPI void APIENTRY glPointParameterf (GLenum pname, GLfloat param); +GLAPI void APIENTRY glPointParameterfv (GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glPointParameteri (GLenum pname, GLint param); +GLAPI void APIENTRY glPointParameteriv (GLenum pname, const GLint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEPROC) (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha); +typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSPROC) (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount); +typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSPROC) (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* *indices, GLsizei primcount); +typedef void (APIENTRYP PFNGLPOINTPARAMETERFPROC) (GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLPOINTPARAMETERFVPROC) (GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLPOINTPARAMETERIPROC) (GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLPOINTPARAMETERIVPROC) (GLenum pname, const GLint *params); +#endif + +#ifndef GL_VERSION_1_4_DEPRECATED +#define GL_VERSION_1_4_DEPRECATED 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glFogCoordf (GLfloat coord); +GLAPI void APIENTRY glFogCoordfv (const GLfloat *coord); +GLAPI void APIENTRY glFogCoordd (GLdouble coord); +GLAPI void APIENTRY glFogCoorddv (const GLdouble *coord); +GLAPI void APIENTRY glFogCoordPointer (GLenum type, GLsizei stride, const GLvoid *pointer); +GLAPI void APIENTRY glSecondaryColor3b (GLbyte red, GLbyte green, GLbyte blue); +GLAPI void APIENTRY glSecondaryColor3bv (const GLbyte *v); +GLAPI void APIENTRY glSecondaryColor3d (GLdouble red, GLdouble green, GLdouble blue); +GLAPI void APIENTRY glSecondaryColor3dv (const GLdouble *v); +GLAPI void APIENTRY glSecondaryColor3f (GLfloat red, GLfloat green, GLfloat blue); +GLAPI void APIENTRY glSecondaryColor3fv (const GLfloat *v); +GLAPI void APIENTRY glSecondaryColor3i (GLint red, GLint green, GLint blue); +GLAPI void APIENTRY glSecondaryColor3iv (const GLint *v); +GLAPI void APIENTRY glSecondaryColor3s (GLshort red, GLshort green, GLshort blue); +GLAPI void APIENTRY glSecondaryColor3sv (const GLshort *v); +GLAPI void APIENTRY glSecondaryColor3ub (GLubyte red, GLubyte green, GLubyte blue); +GLAPI void APIENTRY glSecondaryColor3ubv (const GLubyte *v); +GLAPI void APIENTRY glSecondaryColor3ui (GLuint red, GLuint green, GLuint blue); +GLAPI void APIENTRY glSecondaryColor3uiv (const GLuint *v); +GLAPI void APIENTRY glSecondaryColor3us (GLushort red, GLushort green, GLushort blue); +GLAPI void APIENTRY glSecondaryColor3usv (const GLushort *v); +GLAPI void APIENTRY glSecondaryColorPointer (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +GLAPI void APIENTRY glWindowPos2d (GLdouble x, GLdouble y); +GLAPI void APIENTRY glWindowPos2dv (const GLdouble *v); +GLAPI void APIENTRY glWindowPos2f (GLfloat x, GLfloat y); +GLAPI void APIENTRY glWindowPos2fv (const GLfloat *v); +GLAPI void APIENTRY glWindowPos2i (GLint x, GLint y); +GLAPI void APIENTRY glWindowPos2iv (const GLint *v); +GLAPI void APIENTRY glWindowPos2s (GLshort x, GLshort y); +GLAPI void APIENTRY glWindowPos2sv (const GLshort *v); +GLAPI void APIENTRY glWindowPos3d (GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glWindowPos3dv (const GLdouble *v); +GLAPI void APIENTRY glWindowPos3f (GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glWindowPos3fv (const GLfloat *v); +GLAPI void APIENTRY glWindowPos3i (GLint x, GLint y, GLint z); +GLAPI void APIENTRY glWindowPos3iv (const GLint *v); +GLAPI void APIENTRY glWindowPos3s (GLshort x, GLshort y, GLshort z); +GLAPI void APIENTRY glWindowPos3sv (const GLshort *v); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLFOGCOORDFPROC) (GLfloat coord); +typedef void (APIENTRYP PFNGLFOGCOORDFVPROC) (const GLfloat *coord); +typedef void (APIENTRYP PFNGLFOGCOORDDPROC) (GLdouble coord); +typedef void (APIENTRYP PFNGLFOGCOORDDVPROC) (const GLdouble *coord); +typedef void (APIENTRYP PFNGLFOGCOORDPOINTERPROC) (GLenum type, GLsizei stride, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BPROC) (GLbyte red, GLbyte green, GLbyte blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BVPROC) (const GLbyte *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DPROC) (GLdouble red, GLdouble green, GLdouble blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DVPROC) (const GLdouble *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FPROC) (GLfloat red, GLfloat green, GLfloat blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FVPROC) (const GLfloat *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IPROC) (GLint red, GLint green, GLint blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IVPROC) (const GLint *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SPROC) (GLshort red, GLshort green, GLshort blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SVPROC) (const GLshort *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBPROC) (GLubyte red, GLubyte green, GLubyte blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBVPROC) (const GLubyte *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIPROC) (GLuint red, GLuint green, GLuint blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIVPROC) (const GLuint *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USPROC) (GLushort red, GLushort green, GLushort blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USVPROC) (const GLushort *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLORPOINTERPROC) (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLWINDOWPOS2DPROC) (GLdouble x, GLdouble y); +typedef void (APIENTRYP PFNGLWINDOWPOS2DVPROC) (const GLdouble *v); +typedef void (APIENTRYP PFNGLWINDOWPOS2FPROC) (GLfloat x, GLfloat y); +typedef void (APIENTRYP PFNGLWINDOWPOS2FVPROC) (const GLfloat *v); +typedef void (APIENTRYP PFNGLWINDOWPOS2IPROC) (GLint x, GLint y); +typedef void (APIENTRYP PFNGLWINDOWPOS2IVPROC) (const GLint *v); +typedef void (APIENTRYP PFNGLWINDOWPOS2SPROC) (GLshort x, GLshort y); +typedef void (APIENTRYP PFNGLWINDOWPOS2SVPROC) (const GLshort *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3DPROC) (GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLWINDOWPOS3DVPROC) (const GLdouble *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3FPROC) (GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLWINDOWPOS3FVPROC) (const GLfloat *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3IPROC) (GLint x, GLint y, GLint z); +typedef void (APIENTRYP PFNGLWINDOWPOS3IVPROC) (const GLint *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3SPROC) (GLshort x, GLshort y, GLshort z); +typedef void (APIENTRYP PFNGLWINDOWPOS3SVPROC) (const GLshort *v); +#endif + +#ifndef GL_VERSION_1_5 +#define GL_VERSION_1_5 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGenQueries (GLsizei n, GLuint *ids); +GLAPI void APIENTRY glDeleteQueries (GLsizei n, const GLuint *ids); +GLAPI GLboolean APIENTRY glIsQuery (GLuint id); +GLAPI void APIENTRY glBeginQuery (GLenum target, GLuint id); +GLAPI void APIENTRY glEndQuery (GLenum target); +GLAPI void APIENTRY glGetQueryiv (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetQueryObjectiv (GLuint id, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetQueryObjectuiv (GLuint id, GLenum pname, GLuint *params); +GLAPI void APIENTRY glBindBuffer (GLenum target, GLuint buffer); +GLAPI void APIENTRY glDeleteBuffers (GLsizei n, const GLuint *buffers); +GLAPI void APIENTRY glGenBuffers (GLsizei n, GLuint *buffers); +GLAPI GLboolean APIENTRY glIsBuffer (GLuint buffer); +GLAPI void APIENTRY glBufferData (GLenum target, GLsizeiptr size, const GLvoid *data, GLenum usage); +GLAPI void APIENTRY glBufferSubData (GLenum target, GLintptr offset, GLsizeiptr size, const GLvoid *data); +GLAPI void APIENTRY glGetBufferSubData (GLenum target, GLintptr offset, GLsizeiptr size, GLvoid *data); +GLAPI GLvoid* APIENTRY glMapBuffer (GLenum target, GLenum access); +GLAPI GLboolean APIENTRY glUnmapBuffer (GLenum target); +GLAPI void APIENTRY glGetBufferParameteriv (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetBufferPointerv (GLenum target, GLenum pname, GLvoid* *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGENQUERIESPROC) (GLsizei n, GLuint *ids); +typedef void (APIENTRYP PFNGLDELETEQUERIESPROC) (GLsizei n, const GLuint *ids); +typedef GLboolean (APIENTRYP PFNGLISQUERYPROC) (GLuint id); +typedef void (APIENTRYP PFNGLBEGINQUERYPROC) (GLenum target, GLuint id); +typedef void (APIENTRYP PFNGLENDQUERYPROC) (GLenum target); +typedef void (APIENTRYP PFNGLGETQUERYIVPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETQUERYOBJECTIVPROC) (GLuint id, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETQUERYOBJECTUIVPROC) (GLuint id, GLenum pname, GLuint *params); +typedef void (APIENTRYP PFNGLBINDBUFFERPROC) (GLenum target, GLuint buffer); +typedef void (APIENTRYP PFNGLDELETEBUFFERSPROC) (GLsizei n, const GLuint *buffers); +typedef void (APIENTRYP PFNGLGENBUFFERSPROC) (GLsizei n, GLuint *buffers); +typedef GLboolean (APIENTRYP PFNGLISBUFFERPROC) (GLuint buffer); +typedef void (APIENTRYP PFNGLBUFFERDATAPROC) (GLenum target, GLsizeiptr size, const GLvoid *data, GLenum usage); +typedef void (APIENTRYP PFNGLBUFFERSUBDATAPROC) (GLenum target, GLintptr offset, GLsizeiptr size, const GLvoid *data); +typedef void (APIENTRYP PFNGLGETBUFFERSUBDATAPROC) (GLenum target, GLintptr offset, GLsizeiptr size, GLvoid *data); +typedef GLvoid* (APIENTRYP PFNGLMAPBUFFERPROC) (GLenum target, GLenum access); +typedef GLboolean (APIENTRYP PFNGLUNMAPBUFFERPROC) (GLenum target); +typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETBUFFERPOINTERVPROC) (GLenum target, GLenum pname, GLvoid* *params); +#endif + +#ifndef GL_VERSION_2_0 +#define GL_VERSION_2_0 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBlendEquationSeparate (GLenum modeRGB, GLenum modeAlpha); +GLAPI void APIENTRY glDrawBuffers (GLsizei n, const GLenum *bufs); +GLAPI void APIENTRY glStencilOpSeparate (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass); +GLAPI void APIENTRY glStencilFuncSeparate (GLenum face, GLenum func, GLint ref, GLuint mask); +GLAPI void APIENTRY glStencilMaskSeparate (GLenum face, GLuint mask); +GLAPI void APIENTRY glAttachShader (GLuint program, GLuint shader); +GLAPI void APIENTRY glBindAttribLocation (GLuint program, GLuint index, const GLchar *name); +GLAPI void APIENTRY glCompileShader (GLuint shader); +GLAPI GLuint APIENTRY glCreateProgram (void); +GLAPI GLuint APIENTRY glCreateShader (GLenum type); +GLAPI void APIENTRY glDeleteProgram (GLuint program); +GLAPI void APIENTRY glDeleteShader (GLuint shader); +GLAPI void APIENTRY glDetachShader (GLuint program, GLuint shader); +GLAPI void APIENTRY glDisableVertexAttribArray (GLuint index); +GLAPI void APIENTRY glEnableVertexAttribArray (GLuint index); +GLAPI void APIENTRY glGetActiveAttrib (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name); +GLAPI void APIENTRY glGetActiveUniform (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name); +GLAPI void APIENTRY glGetAttachedShaders (GLuint program, GLsizei maxCount, GLsizei *count, GLuint *obj); +GLAPI GLint APIENTRY glGetAttribLocation (GLuint program, const GLchar *name); +GLAPI void APIENTRY glGetProgramiv (GLuint program, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetProgramInfoLog (GLuint program, GLsizei bufSize, GLsizei *length, GLchar *infoLog); +GLAPI void APIENTRY glGetShaderiv (GLuint shader, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetShaderInfoLog (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *infoLog); +GLAPI void APIENTRY glGetShaderSource (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *source); +GLAPI GLint APIENTRY glGetUniformLocation (GLuint program, const GLchar *name); +GLAPI void APIENTRY glGetUniformfv (GLuint program, GLint location, GLfloat *params); +GLAPI void APIENTRY glGetUniformiv (GLuint program, GLint location, GLint *params); +GLAPI void APIENTRY glGetVertexAttribdv (GLuint index, GLenum pname, GLdouble *params); +GLAPI void APIENTRY glGetVertexAttribfv (GLuint index, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetVertexAttribiv (GLuint index, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetVertexAttribPointerv (GLuint index, GLenum pname, GLvoid* *pointer); +GLAPI GLboolean APIENTRY glIsProgram (GLuint program); +GLAPI GLboolean APIENTRY glIsShader (GLuint shader); +GLAPI void APIENTRY glLinkProgram (GLuint program); +GLAPI void APIENTRY glShaderSource (GLuint shader, GLsizei count, const GLchar* *string, const GLint *length); +GLAPI void APIENTRY glUseProgram (GLuint program); +GLAPI void APIENTRY glUniform1f (GLint location, GLfloat v0); +GLAPI void APIENTRY glUniform2f (GLint location, GLfloat v0, GLfloat v1); +GLAPI void APIENTRY glUniform3f (GLint location, GLfloat v0, GLfloat v1, GLfloat v2); +GLAPI void APIENTRY glUniform4f (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3); +GLAPI void APIENTRY glUniform1i (GLint location, GLint v0); +GLAPI void APIENTRY glUniform2i (GLint location, GLint v0, GLint v1); +GLAPI void APIENTRY glUniform3i (GLint location, GLint v0, GLint v1, GLint v2); +GLAPI void APIENTRY glUniform4i (GLint location, GLint v0, GLint v1, GLint v2, GLint v3); +GLAPI void APIENTRY glUniform1fv (GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glUniform2fv (GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glUniform3fv (GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glUniform4fv (GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glUniform1iv (GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glUniform2iv (GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glUniform3iv (GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glUniform4iv (GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glUniformMatrix2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glUniformMatrix3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glUniformMatrix4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glValidateProgram (GLuint program); +GLAPI void APIENTRY glVertexAttrib1d (GLuint index, GLdouble x); +GLAPI void APIENTRY glVertexAttrib1dv (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib1f (GLuint index, GLfloat x); +GLAPI void APIENTRY glVertexAttrib1fv (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib1s (GLuint index, GLshort x); +GLAPI void APIENTRY glVertexAttrib1sv (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib2d (GLuint index, GLdouble x, GLdouble y); +GLAPI void APIENTRY glVertexAttrib2dv (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib2f (GLuint index, GLfloat x, GLfloat y); +GLAPI void APIENTRY glVertexAttrib2fv (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib2s (GLuint index, GLshort x, GLshort y); +GLAPI void APIENTRY glVertexAttrib2sv (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib3d (GLuint index, GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glVertexAttrib3dv (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib3f (GLuint index, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glVertexAttrib3fv (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib3s (GLuint index, GLshort x, GLshort y, GLshort z); +GLAPI void APIENTRY glVertexAttrib3sv (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib4Nbv (GLuint index, const GLbyte *v); +GLAPI void APIENTRY glVertexAttrib4Niv (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttrib4Nsv (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib4Nub (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w); +GLAPI void APIENTRY glVertexAttrib4Nubv (GLuint index, const GLubyte *v); +GLAPI void APIENTRY glVertexAttrib4Nuiv (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttrib4Nusv (GLuint index, const GLushort *v); +GLAPI void APIENTRY glVertexAttrib4bv (GLuint index, const GLbyte *v); +GLAPI void APIENTRY glVertexAttrib4d (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glVertexAttrib4dv (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib4f (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glVertexAttrib4fv (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib4iv (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttrib4s (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w); +GLAPI void APIENTRY glVertexAttrib4sv (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib4ubv (GLuint index, const GLubyte *v); +GLAPI void APIENTRY glVertexAttrib4uiv (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttrib4usv (GLuint index, const GLushort *v); +GLAPI void APIENTRY glVertexAttribPointer (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const GLvoid *pointer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEPROC) (GLenum modeRGB, GLenum modeAlpha); +typedef void (APIENTRYP PFNGLDRAWBUFFERSPROC) (GLsizei n, const GLenum *bufs); +typedef void (APIENTRYP PFNGLSTENCILOPSEPARATEPROC) (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass); +typedef void (APIENTRYP PFNGLSTENCILFUNCSEPARATEPROC) (GLenum face, GLenum func, GLint ref, GLuint mask); +typedef void (APIENTRYP PFNGLSTENCILMASKSEPARATEPROC) (GLenum face, GLuint mask); +typedef void (APIENTRYP PFNGLATTACHSHADERPROC) (GLuint program, GLuint shader); +typedef void (APIENTRYP PFNGLBINDATTRIBLOCATIONPROC) (GLuint program, GLuint index, const GLchar *name); +typedef void (APIENTRYP PFNGLCOMPILESHADERPROC) (GLuint shader); +typedef GLuint (APIENTRYP PFNGLCREATEPROGRAMPROC) (void); +typedef GLuint (APIENTRYP PFNGLCREATESHADERPROC) (GLenum type); +typedef void (APIENTRYP PFNGLDELETEPROGRAMPROC) (GLuint program); +typedef void (APIENTRYP PFNGLDELETESHADERPROC) (GLuint shader); +typedef void (APIENTRYP PFNGLDETACHSHADERPROC) (GLuint program, GLuint shader); +typedef void (APIENTRYP PFNGLDISABLEVERTEXATTRIBARRAYPROC) (GLuint index); +typedef void (APIENTRYP PFNGLENABLEVERTEXATTRIBARRAYPROC) (GLuint index); +typedef void (APIENTRYP PFNGLGETACTIVEATTRIBPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name); +typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLint *size, GLenum *type, GLchar *name); +typedef void (APIENTRYP PFNGLGETATTACHEDSHADERSPROC) (GLuint program, GLsizei maxCount, GLsizei *count, GLuint *obj); +typedef GLint (APIENTRYP PFNGLGETATTRIBLOCATIONPROC) (GLuint program, const GLchar *name); +typedef void (APIENTRYP PFNGLGETPROGRAMIVPROC) (GLuint program, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETPROGRAMINFOLOGPROC) (GLuint program, GLsizei bufSize, GLsizei *length, GLchar *infoLog); +typedef void (APIENTRYP PFNGLGETSHADERIVPROC) (GLuint shader, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETSHADERINFOLOGPROC) (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *infoLog); +typedef void (APIENTRYP PFNGLGETSHADERSOURCEPROC) (GLuint shader, GLsizei bufSize, GLsizei *length, GLchar *source); +typedef GLint (APIENTRYP PFNGLGETUNIFORMLOCATIONPROC) (GLuint program, const GLchar *name); +typedef void (APIENTRYP PFNGLGETUNIFORMFVPROC) (GLuint program, GLint location, GLfloat *params); +typedef void (APIENTRYP PFNGLGETUNIFORMIVPROC) (GLuint program, GLint location, GLint *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBDVPROC) (GLuint index, GLenum pname, GLdouble *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBFVPROC) (GLuint index, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIVPROC) (GLuint index, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBPOINTERVPROC) (GLuint index, GLenum pname, GLvoid* *pointer); +typedef GLboolean (APIENTRYP PFNGLISPROGRAMPROC) (GLuint program); +typedef GLboolean (APIENTRYP PFNGLISSHADERPROC) (GLuint shader); +typedef void (APIENTRYP PFNGLLINKPROGRAMPROC) (GLuint program); +typedef void (APIENTRYP PFNGLSHADERSOURCEPROC) (GLuint shader, GLsizei count, const GLchar* *string, const GLint *length); +typedef void (APIENTRYP PFNGLUSEPROGRAMPROC) (GLuint program); +typedef void (APIENTRYP PFNGLUNIFORM1FPROC) (GLint location, GLfloat v0); +typedef void (APIENTRYP PFNGLUNIFORM2FPROC) (GLint location, GLfloat v0, GLfloat v1); +typedef void (APIENTRYP PFNGLUNIFORM3FPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2); +typedef void (APIENTRYP PFNGLUNIFORM4FPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3); +typedef void (APIENTRYP PFNGLUNIFORM1IPROC) (GLint location, GLint v0); +typedef void (APIENTRYP PFNGLUNIFORM2IPROC) (GLint location, GLint v0, GLint v1); +typedef void (APIENTRYP PFNGLUNIFORM3IPROC) (GLint location, GLint v0, GLint v1, GLint v2); +typedef void (APIENTRYP PFNGLUNIFORM4IPROC) (GLint location, GLint v0, GLint v1, GLint v2, GLint v3); +typedef void (APIENTRYP PFNGLUNIFORM1FVPROC) (GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORM2FVPROC) (GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORM3FVPROC) (GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORM4FVPROC) (GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORM1IVPROC) (GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLUNIFORM2IVPROC) (GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLUNIFORM3IVPROC) (GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLUNIFORM4IVPROC) (GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX2FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX3FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX4FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLVALIDATEPROGRAMPROC) (GLuint program); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1DPROC) (GLuint index, GLdouble x); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1DVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1FPROC) (GLuint index, GLfloat x); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1FVPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1SPROC) (GLuint index, GLshort x); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1SVPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2DPROC) (GLuint index, GLdouble x, GLdouble y); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2DVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2FPROC) (GLuint index, GLfloat x, GLfloat y); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2FVPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2SPROC) (GLuint index, GLshort x, GLshort y); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2SVPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3DVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3FPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3FVPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3SPROC) (GLuint index, GLshort x, GLshort y, GLshort z); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3SVPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NBVPROC) (GLuint index, const GLbyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NIVPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NSVPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBPROC) (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBVPROC) (GLuint index, const GLubyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUIVPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUSVPROC) (GLuint index, const GLushort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4BVPROC) (GLuint index, const GLbyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4DVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4FPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4FVPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4IVPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4SPROC) (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4SVPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4UBVPROC) (GLuint index, const GLubyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4UIVPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4USVPROC) (GLuint index, const GLushort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBPOINTERPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const GLvoid *pointer); +#endif + +#ifndef GL_VERSION_2_1 +#define GL_VERSION_2_1 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glUniformMatrix2x3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glUniformMatrix3x2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glUniformMatrix2x4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glUniformMatrix4x2fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glUniformMatrix3x4fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glUniformMatrix4x3fv (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X3FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X2FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X4FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X2FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X4FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X3FVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +#endif + +#ifndef GL_VERSION_3_0 +#define GL_VERSION_3_0 1 +/* OpenGL 3.0 also reuses entry points from these extensions: */ +/* ARB_framebuffer_object */ +/* ARB_map_buffer_range */ +/* ARB_vertex_array_object */ +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glColorMaski (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a); +GLAPI void APIENTRY glGetBooleani_v (GLenum target, GLuint index, GLboolean *data); +GLAPI void APIENTRY glGetIntegeri_v (GLenum target, GLuint index, GLint *data); +GLAPI void APIENTRY glEnablei (GLenum target, GLuint index); +GLAPI void APIENTRY glDisablei (GLenum target, GLuint index); +GLAPI GLboolean APIENTRY glIsEnabledi (GLenum target, GLuint index); +GLAPI void APIENTRY glBeginTransformFeedback (GLenum primitiveMode); +GLAPI void APIENTRY glEndTransformFeedback (void); +GLAPI void APIENTRY glBindBufferRange (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size); +GLAPI void APIENTRY glBindBufferBase (GLenum target, GLuint index, GLuint buffer); +GLAPI void APIENTRY glTransformFeedbackVaryings (GLuint program, GLsizei count, const GLchar* *varyings, GLenum bufferMode); +GLAPI void APIENTRY glGetTransformFeedbackVarying (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name); +GLAPI void APIENTRY glClampColor (GLenum target, GLenum clamp); +GLAPI void APIENTRY glBeginConditionalRender (GLuint id, GLenum mode); +GLAPI void APIENTRY glEndConditionalRender (void); +GLAPI void APIENTRY glVertexAttribIPointer (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +GLAPI void APIENTRY glGetVertexAttribIiv (GLuint index, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetVertexAttribIuiv (GLuint index, GLenum pname, GLuint *params); +GLAPI void APIENTRY glVertexAttribI1i (GLuint index, GLint x); +GLAPI void APIENTRY glVertexAttribI2i (GLuint index, GLint x, GLint y); +GLAPI void APIENTRY glVertexAttribI3i (GLuint index, GLint x, GLint y, GLint z); +GLAPI void APIENTRY glVertexAttribI4i (GLuint index, GLint x, GLint y, GLint z, GLint w); +GLAPI void APIENTRY glVertexAttribI1ui (GLuint index, GLuint x); +GLAPI void APIENTRY glVertexAttribI2ui (GLuint index, GLuint x, GLuint y); +GLAPI void APIENTRY glVertexAttribI3ui (GLuint index, GLuint x, GLuint y, GLuint z); +GLAPI void APIENTRY glVertexAttribI4ui (GLuint index, GLuint x, GLuint y, GLuint z, GLuint w); +GLAPI void APIENTRY glVertexAttribI1iv (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttribI2iv (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttribI3iv (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttribI4iv (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttribI1uiv (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttribI2uiv (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttribI3uiv (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttribI4uiv (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttribI4bv (GLuint index, const GLbyte *v); +GLAPI void APIENTRY glVertexAttribI4sv (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttribI4ubv (GLuint index, const GLubyte *v); +GLAPI void APIENTRY glVertexAttribI4usv (GLuint index, const GLushort *v); +GLAPI void APIENTRY glGetUniformuiv (GLuint program, GLint location, GLuint *params); +GLAPI void APIENTRY glBindFragDataLocation (GLuint program, GLuint color, const GLchar *name); +GLAPI GLint APIENTRY glGetFragDataLocation (GLuint program, const GLchar *name); +GLAPI void APIENTRY glUniform1ui (GLint location, GLuint v0); +GLAPI void APIENTRY glUniform2ui (GLint location, GLuint v0, GLuint v1); +GLAPI void APIENTRY glUniform3ui (GLint location, GLuint v0, GLuint v1, GLuint v2); +GLAPI void APIENTRY glUniform4ui (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3); +GLAPI void APIENTRY glUniform1uiv (GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glUniform2uiv (GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glUniform3uiv (GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glUniform4uiv (GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glTexParameterIiv (GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glTexParameterIuiv (GLenum target, GLenum pname, const GLuint *params); +GLAPI void APIENTRY glGetTexParameterIiv (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetTexParameterIuiv (GLenum target, GLenum pname, GLuint *params); +GLAPI void APIENTRY glClearBufferiv (GLenum buffer, GLint drawbuffer, const GLint *value); +GLAPI void APIENTRY glClearBufferuiv (GLenum buffer, GLint drawbuffer, const GLuint *value); +GLAPI void APIENTRY glClearBufferfv (GLenum buffer, GLint drawbuffer, const GLfloat *value); +GLAPI void APIENTRY glClearBufferfi (GLenum buffer, GLint drawbuffer, GLfloat depth, GLint stencil); +GLAPI const GLubyte * APIENTRY glGetStringi (GLenum name, GLuint index); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOLORMASKIPROC) (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a); +typedef void (APIENTRYP PFNGLGETBOOLEANI_VPROC) (GLenum target, GLuint index, GLboolean *data); +typedef void (APIENTRYP PFNGLGETINTEGERI_VPROC) (GLenum target, GLuint index, GLint *data); +typedef void (APIENTRYP PFNGLENABLEIPROC) (GLenum target, GLuint index); +typedef void (APIENTRYP PFNGLDISABLEIPROC) (GLenum target, GLuint index); +typedef GLboolean (APIENTRYP PFNGLISENABLEDIPROC) (GLenum target, GLuint index); +typedef void (APIENTRYP PFNGLBEGINTRANSFORMFEEDBACKPROC) (GLenum primitiveMode); +typedef void (APIENTRYP PFNGLENDTRANSFORMFEEDBACKPROC) (void); +typedef void (APIENTRYP PFNGLBINDBUFFERRANGEPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size); +typedef void (APIENTRYP PFNGLBINDBUFFERBASEPROC) (GLenum target, GLuint index, GLuint buffer); +typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKVARYINGSPROC) (GLuint program, GLsizei count, const GLchar* *varyings, GLenum bufferMode); +typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKVARYINGPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name); +typedef void (APIENTRYP PFNGLCLAMPCOLORPROC) (GLenum target, GLenum clamp); +typedef void (APIENTRYP PFNGLBEGINCONDITIONALRENDERPROC) (GLuint id, GLenum mode); +typedef void (APIENTRYP PFNGLENDCONDITIONALRENDERPROC) (void); +typedef void (APIENTRYP PFNGLVERTEXATTRIBIPOINTERPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIIVPROC) (GLuint index, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIUIVPROC) (GLuint index, GLenum pname, GLuint *params); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IPROC) (GLuint index, GLint x); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IPROC) (GLuint index, GLint x, GLint y); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IPROC) (GLuint index, GLint x, GLint y, GLint z); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IPROC) (GLuint index, GLint x, GLint y, GLint z, GLint w); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIPROC) (GLuint index, GLuint x); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIPROC) (GLuint index, GLuint x, GLuint y); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIPROC) (GLuint index, GLuint x, GLuint y, GLuint z); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIPROC) (GLuint index, GLuint x, GLuint y, GLuint z, GLuint w); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IVPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IVPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IVPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IVPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIVPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIVPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIVPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIVPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4BVPROC) (GLuint index, const GLbyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4SVPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UBVPROC) (GLuint index, const GLubyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4USVPROC) (GLuint index, const GLushort *v); +typedef void (APIENTRYP PFNGLGETUNIFORMUIVPROC) (GLuint program, GLint location, GLuint *params); +typedef void (APIENTRYP PFNGLBINDFRAGDATALOCATIONPROC) (GLuint program, GLuint color, const GLchar *name); +typedef GLint (APIENTRYP PFNGLGETFRAGDATALOCATIONPROC) (GLuint program, const GLchar *name); +typedef void (APIENTRYP PFNGLUNIFORM1UIPROC) (GLint location, GLuint v0); +typedef void (APIENTRYP PFNGLUNIFORM2UIPROC) (GLint location, GLuint v0, GLuint v1); +typedef void (APIENTRYP PFNGLUNIFORM3UIPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2); +typedef void (APIENTRYP PFNGLUNIFORM4UIPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3); +typedef void (APIENTRYP PFNGLUNIFORM1UIVPROC) (GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLUNIFORM2UIVPROC) (GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLUNIFORM3UIVPROC) (GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLUNIFORM4UIVPROC) (GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLTEXPARAMETERIIVPROC) (GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLTEXPARAMETERIUIVPROC) (GLenum target, GLenum pname, const GLuint *params); +typedef void (APIENTRYP PFNGLGETTEXPARAMETERIIVPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETTEXPARAMETERIUIVPROC) (GLenum target, GLenum pname, GLuint *params); +typedef void (APIENTRYP PFNGLCLEARBUFFERIVPROC) (GLenum buffer, GLint drawbuffer, const GLint *value); +typedef void (APIENTRYP PFNGLCLEARBUFFERUIVPROC) (GLenum buffer, GLint drawbuffer, const GLuint *value); +typedef void (APIENTRYP PFNGLCLEARBUFFERFVPROC) (GLenum buffer, GLint drawbuffer, const GLfloat *value); +typedef void (APIENTRYP PFNGLCLEARBUFFERFIPROC) (GLenum buffer, GLint drawbuffer, GLfloat depth, GLint stencil); +typedef const GLubyte * (APIENTRYP PFNGLGETSTRINGIPROC) (GLenum name, GLuint index); +#endif + +#ifndef GL_VERSION_3_1 +#define GL_VERSION_3_1 1 +/* OpenGL 3.1 also reuses entry points from these extensions: */ +/* ARB_copy_buffer */ +/* ARB_uniform_buffer_object */ +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDrawArraysInstanced (GLenum mode, GLint first, GLsizei count, GLsizei primcount); +GLAPI void APIENTRY glDrawElementsInstanced (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount); +GLAPI void APIENTRY glTexBuffer (GLenum target, GLenum internalformat, GLuint buffer); +GLAPI void APIENTRY glPrimitiveRestartIndex (GLuint index); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDRAWARRAYSINSTANCEDPROC) (GLenum mode, GLint first, GLsizei count, GLsizei primcount); +typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount); +typedef void (APIENTRYP PFNGLTEXBUFFERPROC) (GLenum target, GLenum internalformat, GLuint buffer); +typedef void (APIENTRYP PFNGLPRIMITIVERESTARTINDEXPROC) (GLuint index); +#endif + +#ifndef GL_VERSION_3_2 +#define GL_VERSION_3_2 1 +/* OpenGL 3.2 also reuses entry points from these extensions: */ +/* ARB_draw_elements_base_vertex */ +/* ARB_provoking_vertex */ +/* ARB_sync */ +/* ARB_texture_multisample */ +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGetInteger64i_v (GLenum target, GLuint index, GLint64 *data); +GLAPI void APIENTRY glGetBufferParameteri64v (GLenum target, GLenum pname, GLint64 *params); +GLAPI void APIENTRY glFramebufferTexture (GLenum target, GLenum attachment, GLuint texture, GLint level); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGETINTEGER64I_VPROC) (GLenum target, GLuint index, GLint64 *data); +typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERI64VPROC) (GLenum target, GLenum pname, GLint64 *params); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level); +#endif + +#ifndef GL_VERSION_3_3 +#define GL_VERSION_3_3 1 +/* OpenGL 3.3 also reuses entry points from these extensions: */ +/* ARB_blend_func_extended */ +/* ARB_sampler_objects */ +/* ARB_explicit_attrib_location, but it has none */ +/* ARB_occlusion_query2 (no entry points) */ +/* ARB_shader_bit_encoding (no entry points) */ +/* ARB_texture_rgb10_a2ui (no entry points) */ +/* ARB_texture_swizzle (no entry points) */ +/* ARB_timer_query */ +/* ARB_vertex_type_2_10_10_10_rev */ +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexAttribDivisor (GLuint index, GLuint divisor); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXATTRIBDIVISORPROC) (GLuint index, GLuint divisor); +#endif + +#ifndef GL_VERSION_4_0 +#define GL_VERSION_4_0 1 +/* OpenGL 4.0 also reuses entry points from these extensions: */ +/* ARB_texture_query_lod (no entry points) */ +/* ARB_draw_indirect */ +/* ARB_gpu_shader5 (no entry points) */ +/* ARB_gpu_shader_fp64 */ +/* ARB_shader_subroutine */ +/* ARB_tessellation_shader */ +/* ARB_texture_buffer_object_rgb32 (no entry points) */ +/* ARB_texture_cube_map_array (no entry points) */ +/* ARB_texture_gather (no entry points) */ +/* ARB_transform_feedback2 */ +/* ARB_transform_feedback3 */ +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glMinSampleShading (GLclampf value); +GLAPI void APIENTRY glBlendEquationi (GLuint buf, GLenum mode); +GLAPI void APIENTRY glBlendEquationSeparatei (GLuint buf, GLenum modeRGB, GLenum modeAlpha); +GLAPI void APIENTRY glBlendFunci (GLuint buf, GLenum src, GLenum dst); +GLAPI void APIENTRY glBlendFuncSeparatei (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLMINSAMPLESHADINGPROC) (GLclampf value); +typedef void (APIENTRYP PFNGLBLENDEQUATIONIPROC) (GLuint buf, GLenum mode); +typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEIPROC) (GLuint buf, GLenum modeRGB, GLenum modeAlpha); +typedef void (APIENTRYP PFNGLBLENDFUNCIPROC) (GLuint buf, GLenum src, GLenum dst); +typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEIPROC) (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha); +#endif + +#ifndef GL_VERSION_4_1 +#define GL_VERSION_4_1 1 +/* OpenGL 4.1 also reuses entry points from these extensions: */ +/* ARB_ES2_compatibility */ +/* ARB_get_program_binary */ +/* ARB_separate_shader_objects */ +/* ARB_shader_precision (no entry points) */ +/* ARB_vertex_attrib_64bit */ +/* ARB_viewport_array */ +#endif + +#ifndef GL_ARB_multitexture +#define GL_ARB_multitexture 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glActiveTextureARB (GLenum texture); +GLAPI void APIENTRY glClientActiveTextureARB (GLenum texture); +GLAPI void APIENTRY glMultiTexCoord1dARB (GLenum target, GLdouble s); +GLAPI void APIENTRY glMultiTexCoord1dvARB (GLenum target, const GLdouble *v); +GLAPI void APIENTRY glMultiTexCoord1fARB (GLenum target, GLfloat s); +GLAPI void APIENTRY glMultiTexCoord1fvARB (GLenum target, const GLfloat *v); +GLAPI void APIENTRY glMultiTexCoord1iARB (GLenum target, GLint s); +GLAPI void APIENTRY glMultiTexCoord1ivARB (GLenum target, const GLint *v); +GLAPI void APIENTRY glMultiTexCoord1sARB (GLenum target, GLshort s); +GLAPI void APIENTRY glMultiTexCoord1svARB (GLenum target, const GLshort *v); +GLAPI void APIENTRY glMultiTexCoord2dARB (GLenum target, GLdouble s, GLdouble t); +GLAPI void APIENTRY glMultiTexCoord2dvARB (GLenum target, const GLdouble *v); +GLAPI void APIENTRY glMultiTexCoord2fARB (GLenum target, GLfloat s, GLfloat t); +GLAPI void APIENTRY glMultiTexCoord2fvARB (GLenum target, const GLfloat *v); +GLAPI void APIENTRY glMultiTexCoord2iARB (GLenum target, GLint s, GLint t); +GLAPI void APIENTRY glMultiTexCoord2ivARB (GLenum target, const GLint *v); +GLAPI void APIENTRY glMultiTexCoord2sARB (GLenum target, GLshort s, GLshort t); +GLAPI void APIENTRY glMultiTexCoord2svARB (GLenum target, const GLshort *v); +GLAPI void APIENTRY glMultiTexCoord3dARB (GLenum target, GLdouble s, GLdouble t, GLdouble r); +GLAPI void APIENTRY glMultiTexCoord3dvARB (GLenum target, const GLdouble *v); +GLAPI void APIENTRY glMultiTexCoord3fARB (GLenum target, GLfloat s, GLfloat t, GLfloat r); +GLAPI void APIENTRY glMultiTexCoord3fvARB (GLenum target, const GLfloat *v); +GLAPI void APIENTRY glMultiTexCoord3iARB (GLenum target, GLint s, GLint t, GLint r); +GLAPI void APIENTRY glMultiTexCoord3ivARB (GLenum target, const GLint *v); +GLAPI void APIENTRY glMultiTexCoord3sARB (GLenum target, GLshort s, GLshort t, GLshort r); +GLAPI void APIENTRY glMultiTexCoord3svARB (GLenum target, const GLshort *v); +GLAPI void APIENTRY glMultiTexCoord4dARB (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q); +GLAPI void APIENTRY glMultiTexCoord4dvARB (GLenum target, const GLdouble *v); +GLAPI void APIENTRY glMultiTexCoord4fARB (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q); +GLAPI void APIENTRY glMultiTexCoord4fvARB (GLenum target, const GLfloat *v); +GLAPI void APIENTRY glMultiTexCoord4iARB (GLenum target, GLint s, GLint t, GLint r, GLint q); +GLAPI void APIENTRY glMultiTexCoord4ivARB (GLenum target, const GLint *v); +GLAPI void APIENTRY glMultiTexCoord4sARB (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q); +GLAPI void APIENTRY glMultiTexCoord4svARB (GLenum target, const GLshort *v); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLACTIVETEXTUREARBPROC) (GLenum texture); +typedef void (APIENTRYP PFNGLCLIENTACTIVETEXTUREARBPROC) (GLenum texture); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1DARBPROC) (GLenum target, GLdouble s); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1DVARBPROC) (GLenum target, const GLdouble *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1FARBPROC) (GLenum target, GLfloat s); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1FVARBPROC) (GLenum target, const GLfloat *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1IARBPROC) (GLenum target, GLint s); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1IVARBPROC) (GLenum target, const GLint *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1SARBPROC) (GLenum target, GLshort s); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1SVARBPROC) (GLenum target, const GLshort *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2DARBPROC) (GLenum target, GLdouble s, GLdouble t); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2DVARBPROC) (GLenum target, const GLdouble *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2FARBPROC) (GLenum target, GLfloat s, GLfloat t); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2FVARBPROC) (GLenum target, const GLfloat *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2IARBPROC) (GLenum target, GLint s, GLint t); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2IVARBPROC) (GLenum target, const GLint *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2SARBPROC) (GLenum target, GLshort s, GLshort t); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2SVARBPROC) (GLenum target, const GLshort *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3DARBPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3DVARBPROC) (GLenum target, const GLdouble *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3FARBPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3FVARBPROC) (GLenum target, const GLfloat *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3IARBPROC) (GLenum target, GLint s, GLint t, GLint r); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3IVARBPROC) (GLenum target, const GLint *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3SARBPROC) (GLenum target, GLshort s, GLshort t, GLshort r); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3SVARBPROC) (GLenum target, const GLshort *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4DARBPROC) (GLenum target, GLdouble s, GLdouble t, GLdouble r, GLdouble q); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4DVARBPROC) (GLenum target, const GLdouble *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4FARBPROC) (GLenum target, GLfloat s, GLfloat t, GLfloat r, GLfloat q); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4FVARBPROC) (GLenum target, const GLfloat *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4IARBPROC) (GLenum target, GLint s, GLint t, GLint r, GLint q); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4IVARBPROC) (GLenum target, const GLint *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4SARBPROC) (GLenum target, GLshort s, GLshort t, GLshort r, GLshort q); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4SVARBPROC) (GLenum target, const GLshort *v); +#endif + +#ifndef GL_ARB_transpose_matrix +#define GL_ARB_transpose_matrix 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glLoadTransposeMatrixfARB (const GLfloat *m); +GLAPI void APIENTRY glLoadTransposeMatrixdARB (const GLdouble *m); +GLAPI void APIENTRY glMultTransposeMatrixfARB (const GLfloat *m); +GLAPI void APIENTRY glMultTransposeMatrixdARB (const GLdouble *m); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXFARBPROC) (const GLfloat *m); +typedef void (APIENTRYP PFNGLLOADTRANSPOSEMATRIXDARBPROC) (const GLdouble *m); +typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXFARBPROC) (const GLfloat *m); +typedef void (APIENTRYP PFNGLMULTTRANSPOSEMATRIXDARBPROC) (const GLdouble *m); +#endif + +#ifndef GL_ARB_multisample +#define GL_ARB_multisample 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glSampleCoverageARB (GLclampf value, GLboolean invert); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLSAMPLECOVERAGEARBPROC) (GLclampf value, GLboolean invert); +#endif + +#ifndef GL_ARB_texture_env_add +#define GL_ARB_texture_env_add 1 +#endif + +#ifndef GL_ARB_texture_cube_map +#define GL_ARB_texture_cube_map 1 +#endif + +#ifndef GL_ARB_texture_compression +#define GL_ARB_texture_compression 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glCompressedTexImage3DARB (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glCompressedTexImage2DARB (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glCompressedTexImage1DARB (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glCompressedTexSubImage3DARB (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glCompressedTexSubImage2DARB (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glCompressedTexSubImage1DARB (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *data); +GLAPI void APIENTRY glGetCompressedTexImageARB (GLenum target, GLint level, GLvoid *img); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE3DARBPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE2DARBPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXIMAGE1DARBPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE3DARBPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE2DARBPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXSUBIMAGE1DARBPROC) (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *data); +typedef void (APIENTRYP PFNGLGETCOMPRESSEDTEXIMAGEARBPROC) (GLenum target, GLint level, GLvoid *img); +#endif + +#ifndef GL_ARB_texture_border_clamp +#define GL_ARB_texture_border_clamp 1 +#endif + +#ifndef GL_ARB_point_parameters +#define GL_ARB_point_parameters 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPointParameterfARB (GLenum pname, GLfloat param); +GLAPI void APIENTRY glPointParameterfvARB (GLenum pname, const GLfloat *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPOINTPARAMETERFARBPROC) (GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLPOINTPARAMETERFVARBPROC) (GLenum pname, const GLfloat *params); +#endif + +#ifndef GL_ARB_vertex_blend +#define GL_ARB_vertex_blend 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glWeightbvARB (GLint size, const GLbyte *weights); +GLAPI void APIENTRY glWeightsvARB (GLint size, const GLshort *weights); +GLAPI void APIENTRY glWeightivARB (GLint size, const GLint *weights); +GLAPI void APIENTRY glWeightfvARB (GLint size, const GLfloat *weights); +GLAPI void APIENTRY glWeightdvARB (GLint size, const GLdouble *weights); +GLAPI void APIENTRY glWeightubvARB (GLint size, const GLubyte *weights); +GLAPI void APIENTRY glWeightusvARB (GLint size, const GLushort *weights); +GLAPI void APIENTRY glWeightuivARB (GLint size, const GLuint *weights); +GLAPI void APIENTRY glWeightPointerARB (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +GLAPI void APIENTRY glVertexBlendARB (GLint count); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLWEIGHTBVARBPROC) (GLint size, const GLbyte *weights); +typedef void (APIENTRYP PFNGLWEIGHTSVARBPROC) (GLint size, const GLshort *weights); +typedef void (APIENTRYP PFNGLWEIGHTIVARBPROC) (GLint size, const GLint *weights); +typedef void (APIENTRYP PFNGLWEIGHTFVARBPROC) (GLint size, const GLfloat *weights); +typedef void (APIENTRYP PFNGLWEIGHTDVARBPROC) (GLint size, const GLdouble *weights); +typedef void (APIENTRYP PFNGLWEIGHTUBVARBPROC) (GLint size, const GLubyte *weights); +typedef void (APIENTRYP PFNGLWEIGHTUSVARBPROC) (GLint size, const GLushort *weights); +typedef void (APIENTRYP PFNGLWEIGHTUIVARBPROC) (GLint size, const GLuint *weights); +typedef void (APIENTRYP PFNGLWEIGHTPOINTERARBPROC) (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLVERTEXBLENDARBPROC) (GLint count); +#endif + +#ifndef GL_ARB_matrix_palette +#define GL_ARB_matrix_palette 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glCurrentPaletteMatrixARB (GLint index); +GLAPI void APIENTRY glMatrixIndexubvARB (GLint size, const GLubyte *indices); +GLAPI void APIENTRY glMatrixIndexusvARB (GLint size, const GLushort *indices); +GLAPI void APIENTRY glMatrixIndexuivARB (GLint size, const GLuint *indices); +GLAPI void APIENTRY glMatrixIndexPointerARB (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCURRENTPALETTEMATRIXARBPROC) (GLint index); +typedef void (APIENTRYP PFNGLMATRIXINDEXUBVARBPROC) (GLint size, const GLubyte *indices); +typedef void (APIENTRYP PFNGLMATRIXINDEXUSVARBPROC) (GLint size, const GLushort *indices); +typedef void (APIENTRYP PFNGLMATRIXINDEXUIVARBPROC) (GLint size, const GLuint *indices); +typedef void (APIENTRYP PFNGLMATRIXINDEXPOINTERARBPROC) (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +#endif + +#ifndef GL_ARB_texture_env_combine +#define GL_ARB_texture_env_combine 1 +#endif + +#ifndef GL_ARB_texture_env_crossbar +#define GL_ARB_texture_env_crossbar 1 +#endif + +#ifndef GL_ARB_texture_env_dot3 +#define GL_ARB_texture_env_dot3 1 +#endif + +#ifndef GL_ARB_texture_mirrored_repeat +#define GL_ARB_texture_mirrored_repeat 1 +#endif + +#ifndef GL_ARB_depth_texture +#define GL_ARB_depth_texture 1 +#endif + +#ifndef GL_ARB_shadow +#define GL_ARB_shadow 1 +#endif + +#ifndef GL_ARB_shadow_ambient +#define GL_ARB_shadow_ambient 1 +#endif + +#ifndef GL_ARB_window_pos +#define GL_ARB_window_pos 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glWindowPos2dARB (GLdouble x, GLdouble y); +GLAPI void APIENTRY glWindowPos2dvARB (const GLdouble *v); +GLAPI void APIENTRY glWindowPos2fARB (GLfloat x, GLfloat y); +GLAPI void APIENTRY glWindowPos2fvARB (const GLfloat *v); +GLAPI void APIENTRY glWindowPos2iARB (GLint x, GLint y); +GLAPI void APIENTRY glWindowPos2ivARB (const GLint *v); +GLAPI void APIENTRY glWindowPos2sARB (GLshort x, GLshort y); +GLAPI void APIENTRY glWindowPos2svARB (const GLshort *v); +GLAPI void APIENTRY glWindowPos3dARB (GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glWindowPos3dvARB (const GLdouble *v); +GLAPI void APIENTRY glWindowPos3fARB (GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glWindowPos3fvARB (const GLfloat *v); +GLAPI void APIENTRY glWindowPos3iARB (GLint x, GLint y, GLint z); +GLAPI void APIENTRY glWindowPos3ivARB (const GLint *v); +GLAPI void APIENTRY glWindowPos3sARB (GLshort x, GLshort y, GLshort z); +GLAPI void APIENTRY glWindowPos3svARB (const GLshort *v); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLWINDOWPOS2DARBPROC) (GLdouble x, GLdouble y); +typedef void (APIENTRYP PFNGLWINDOWPOS2DVARBPROC) (const GLdouble *v); +typedef void (APIENTRYP PFNGLWINDOWPOS2FARBPROC) (GLfloat x, GLfloat y); +typedef void (APIENTRYP PFNGLWINDOWPOS2FVARBPROC) (const GLfloat *v); +typedef void (APIENTRYP PFNGLWINDOWPOS2IARBPROC) (GLint x, GLint y); +typedef void (APIENTRYP PFNGLWINDOWPOS2IVARBPROC) (const GLint *v); +typedef void (APIENTRYP PFNGLWINDOWPOS2SARBPROC) (GLshort x, GLshort y); +typedef void (APIENTRYP PFNGLWINDOWPOS2SVARBPROC) (const GLshort *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3DARBPROC) (GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLWINDOWPOS3DVARBPROC) (const GLdouble *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3FARBPROC) (GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLWINDOWPOS3FVARBPROC) (const GLfloat *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3IARBPROC) (GLint x, GLint y, GLint z); +typedef void (APIENTRYP PFNGLWINDOWPOS3IVARBPROC) (const GLint *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3SARBPROC) (GLshort x, GLshort y, GLshort z); +typedef void (APIENTRYP PFNGLWINDOWPOS3SVARBPROC) (const GLshort *v); +#endif + +#ifndef GL_ARB_vertex_program +#define GL_ARB_vertex_program 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexAttrib1dARB (GLuint index, GLdouble x); +GLAPI void APIENTRY glVertexAttrib1dvARB (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib1fARB (GLuint index, GLfloat x); +GLAPI void APIENTRY glVertexAttrib1fvARB (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib1sARB (GLuint index, GLshort x); +GLAPI void APIENTRY glVertexAttrib1svARB (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib2dARB (GLuint index, GLdouble x, GLdouble y); +GLAPI void APIENTRY glVertexAttrib2dvARB (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib2fARB (GLuint index, GLfloat x, GLfloat y); +GLAPI void APIENTRY glVertexAttrib2fvARB (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib2sARB (GLuint index, GLshort x, GLshort y); +GLAPI void APIENTRY glVertexAttrib2svARB (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib3dARB (GLuint index, GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glVertexAttrib3dvARB (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib3fARB (GLuint index, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glVertexAttrib3fvARB (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib3sARB (GLuint index, GLshort x, GLshort y, GLshort z); +GLAPI void APIENTRY glVertexAttrib3svARB (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib4NbvARB (GLuint index, const GLbyte *v); +GLAPI void APIENTRY glVertexAttrib4NivARB (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttrib4NsvARB (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib4NubARB (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w); +GLAPI void APIENTRY glVertexAttrib4NubvARB (GLuint index, const GLubyte *v); +GLAPI void APIENTRY glVertexAttrib4NuivARB (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttrib4NusvARB (GLuint index, const GLushort *v); +GLAPI void APIENTRY glVertexAttrib4bvARB (GLuint index, const GLbyte *v); +GLAPI void APIENTRY glVertexAttrib4dARB (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glVertexAttrib4dvARB (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib4fARB (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glVertexAttrib4fvARB (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib4ivARB (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttrib4sARB (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w); +GLAPI void APIENTRY glVertexAttrib4svARB (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib4ubvARB (GLuint index, const GLubyte *v); +GLAPI void APIENTRY glVertexAttrib4uivARB (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttrib4usvARB (GLuint index, const GLushort *v); +GLAPI void APIENTRY glVertexAttribPointerARB (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const GLvoid *pointer); +GLAPI void APIENTRY glEnableVertexAttribArrayARB (GLuint index); +GLAPI void APIENTRY glDisableVertexAttribArrayARB (GLuint index); +GLAPI void APIENTRY glProgramStringARB (GLenum target, GLenum format, GLsizei len, const GLvoid *string); +GLAPI void APIENTRY glBindProgramARB (GLenum target, GLuint program); +GLAPI void APIENTRY glDeleteProgramsARB (GLsizei n, const GLuint *programs); +GLAPI void APIENTRY glGenProgramsARB (GLsizei n, GLuint *programs); +GLAPI void APIENTRY glProgramEnvParameter4dARB (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glProgramEnvParameter4dvARB (GLenum target, GLuint index, const GLdouble *params); +GLAPI void APIENTRY glProgramEnvParameter4fARB (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glProgramEnvParameter4fvARB (GLenum target, GLuint index, const GLfloat *params); +GLAPI void APIENTRY glProgramLocalParameter4dARB (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glProgramLocalParameter4dvARB (GLenum target, GLuint index, const GLdouble *params); +GLAPI void APIENTRY glProgramLocalParameter4fARB (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glProgramLocalParameter4fvARB (GLenum target, GLuint index, const GLfloat *params); +GLAPI void APIENTRY glGetProgramEnvParameterdvARB (GLenum target, GLuint index, GLdouble *params); +GLAPI void APIENTRY glGetProgramEnvParameterfvARB (GLenum target, GLuint index, GLfloat *params); +GLAPI void APIENTRY glGetProgramLocalParameterdvARB (GLenum target, GLuint index, GLdouble *params); +GLAPI void APIENTRY glGetProgramLocalParameterfvARB (GLenum target, GLuint index, GLfloat *params); +GLAPI void APIENTRY glGetProgramivARB (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetProgramStringARB (GLenum target, GLenum pname, GLvoid *string); +GLAPI void APIENTRY glGetVertexAttribdvARB (GLuint index, GLenum pname, GLdouble *params); +GLAPI void APIENTRY glGetVertexAttribfvARB (GLuint index, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetVertexAttribivARB (GLuint index, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetVertexAttribPointervARB (GLuint index, GLenum pname, GLvoid* *pointer); +GLAPI GLboolean APIENTRY glIsProgramARB (GLuint program); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXATTRIB1DARBPROC) (GLuint index, GLdouble x); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1DVARBPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1FARBPROC) (GLuint index, GLfloat x); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1FVARBPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1SARBPROC) (GLuint index, GLshort x); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1SVARBPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2DARBPROC) (GLuint index, GLdouble x, GLdouble y); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2DVARBPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2FARBPROC) (GLuint index, GLfloat x, GLfloat y); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2FVARBPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2SARBPROC) (GLuint index, GLshort x, GLshort y); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2SVARBPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3DARBPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3DVARBPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3FARBPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3FVARBPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3SARBPROC) (GLuint index, GLshort x, GLshort y, GLshort z); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3SVARBPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NBVARBPROC) (GLuint index, const GLbyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NIVARBPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NSVARBPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBARBPROC) (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUBVARBPROC) (GLuint index, const GLubyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUIVARBPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4NUSVARBPROC) (GLuint index, const GLushort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4BVARBPROC) (GLuint index, const GLbyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4DARBPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4DVARBPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4FARBPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4FVARBPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4IVARBPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4SARBPROC) (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4SVARBPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4UBVARBPROC) (GLuint index, const GLubyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4UIVARBPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4USVARBPROC) (GLuint index, const GLushort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBPOINTERARBPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLENABLEVERTEXATTRIBARRAYARBPROC) (GLuint index); +typedef void (APIENTRYP PFNGLDISABLEVERTEXATTRIBARRAYARBPROC) (GLuint index); +typedef void (APIENTRYP PFNGLPROGRAMSTRINGARBPROC) (GLenum target, GLenum format, GLsizei len, const GLvoid *string); +typedef void (APIENTRYP PFNGLBINDPROGRAMARBPROC) (GLenum target, GLuint program); +typedef void (APIENTRYP PFNGLDELETEPROGRAMSARBPROC) (GLsizei n, const GLuint *programs); +typedef void (APIENTRYP PFNGLGENPROGRAMSARBPROC) (GLsizei n, GLuint *programs); +typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4DARBPROC) (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4DVARBPROC) (GLenum target, GLuint index, const GLdouble *params); +typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4FARBPROC) (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETER4FVARBPROC) (GLenum target, GLuint index, const GLfloat *params); +typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4DARBPROC) (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4DVARBPROC) (GLenum target, GLuint index, const GLdouble *params); +typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4FARBPROC) (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETER4FVARBPROC) (GLenum target, GLuint index, const GLfloat *params); +typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERDVARBPROC) (GLenum target, GLuint index, GLdouble *params); +typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERFVARBPROC) (GLenum target, GLuint index, GLfloat *params); +typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERDVARBPROC) (GLenum target, GLuint index, GLdouble *params); +typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERFVARBPROC) (GLenum target, GLuint index, GLfloat *params); +typedef void (APIENTRYP PFNGLGETPROGRAMIVARBPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETPROGRAMSTRINGARBPROC) (GLenum target, GLenum pname, GLvoid *string); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBDVARBPROC) (GLuint index, GLenum pname, GLdouble *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBFVARBPROC) (GLuint index, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIVARBPROC) (GLuint index, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBPOINTERVARBPROC) (GLuint index, GLenum pname, GLvoid* *pointer); +typedef GLboolean (APIENTRYP PFNGLISPROGRAMARBPROC) (GLuint program); +#endif + +#ifndef GL_ARB_fragment_program +#define GL_ARB_fragment_program 1 +/* All ARB_fragment_program entry points are shared with ARB_vertex_program. */ +#endif + +#ifndef GL_ARB_vertex_buffer_object +#define GL_ARB_vertex_buffer_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBindBufferARB (GLenum target, GLuint buffer); +GLAPI void APIENTRY glDeleteBuffersARB (GLsizei n, const GLuint *buffers); +GLAPI void APIENTRY glGenBuffersARB (GLsizei n, GLuint *buffers); +GLAPI GLboolean APIENTRY glIsBufferARB (GLuint buffer); +GLAPI void APIENTRY glBufferDataARB (GLenum target, GLsizeiptrARB size, const GLvoid *data, GLenum usage); +GLAPI void APIENTRY glBufferSubDataARB (GLenum target, GLintptrARB offset, GLsizeiptrARB size, const GLvoid *data); +GLAPI void APIENTRY glGetBufferSubDataARB (GLenum target, GLintptrARB offset, GLsizeiptrARB size, GLvoid *data); +GLAPI GLvoid* APIENTRY glMapBufferARB (GLenum target, GLenum access); +GLAPI GLboolean APIENTRY glUnmapBufferARB (GLenum target); +GLAPI void APIENTRY glGetBufferParameterivARB (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetBufferPointervARB (GLenum target, GLenum pname, GLvoid* *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBINDBUFFERARBPROC) (GLenum target, GLuint buffer); +typedef void (APIENTRYP PFNGLDELETEBUFFERSARBPROC) (GLsizei n, const GLuint *buffers); +typedef void (APIENTRYP PFNGLGENBUFFERSARBPROC) (GLsizei n, GLuint *buffers); +typedef GLboolean (APIENTRYP PFNGLISBUFFERARBPROC) (GLuint buffer); +typedef void (APIENTRYP PFNGLBUFFERDATAARBPROC) (GLenum target, GLsizeiptrARB size, const GLvoid *data, GLenum usage); +typedef void (APIENTRYP PFNGLBUFFERSUBDATAARBPROC) (GLenum target, GLintptrARB offset, GLsizeiptrARB size, const GLvoid *data); +typedef void (APIENTRYP PFNGLGETBUFFERSUBDATAARBPROC) (GLenum target, GLintptrARB offset, GLsizeiptrARB size, GLvoid *data); +typedef GLvoid* (APIENTRYP PFNGLMAPBUFFERARBPROC) (GLenum target, GLenum access); +typedef GLboolean (APIENTRYP PFNGLUNMAPBUFFERARBPROC) (GLenum target); +typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERIVARBPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETBUFFERPOINTERVARBPROC) (GLenum target, GLenum pname, GLvoid* *params); +#endif + +#ifndef GL_ARB_occlusion_query +#define GL_ARB_occlusion_query 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGenQueriesARB (GLsizei n, GLuint *ids); +GLAPI void APIENTRY glDeleteQueriesARB (GLsizei n, const GLuint *ids); +GLAPI GLboolean APIENTRY glIsQueryARB (GLuint id); +GLAPI void APIENTRY glBeginQueryARB (GLenum target, GLuint id); +GLAPI void APIENTRY glEndQueryARB (GLenum target); +GLAPI void APIENTRY glGetQueryivARB (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetQueryObjectivARB (GLuint id, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetQueryObjectuivARB (GLuint id, GLenum pname, GLuint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGENQUERIESARBPROC) (GLsizei n, GLuint *ids); +typedef void (APIENTRYP PFNGLDELETEQUERIESARBPROC) (GLsizei n, const GLuint *ids); +typedef GLboolean (APIENTRYP PFNGLISQUERYARBPROC) (GLuint id); +typedef void (APIENTRYP PFNGLBEGINQUERYARBPROC) (GLenum target, GLuint id); +typedef void (APIENTRYP PFNGLENDQUERYARBPROC) (GLenum target); +typedef void (APIENTRYP PFNGLGETQUERYIVARBPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETQUERYOBJECTIVARBPROC) (GLuint id, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETQUERYOBJECTUIVARBPROC) (GLuint id, GLenum pname, GLuint *params); +#endif + +#ifndef GL_ARB_shader_objects +#define GL_ARB_shader_objects 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDeleteObjectARB (GLhandleARB obj); +GLAPI GLhandleARB APIENTRY glGetHandleARB (GLenum pname); +GLAPI void APIENTRY glDetachObjectARB (GLhandleARB containerObj, GLhandleARB attachedObj); +GLAPI GLhandleARB APIENTRY glCreateShaderObjectARB (GLenum shaderType); +GLAPI void APIENTRY glShaderSourceARB (GLhandleARB shaderObj, GLsizei count, const GLcharARB* *string, const GLint *length); +GLAPI void APIENTRY glCompileShaderARB (GLhandleARB shaderObj); +GLAPI GLhandleARB APIENTRY glCreateProgramObjectARB (void); +GLAPI void APIENTRY glAttachObjectARB (GLhandleARB containerObj, GLhandleARB obj); +GLAPI void APIENTRY glLinkProgramARB (GLhandleARB programObj); +GLAPI void APIENTRY glUseProgramObjectARB (GLhandleARB programObj); +GLAPI void APIENTRY glValidateProgramARB (GLhandleARB programObj); +GLAPI void APIENTRY glUniform1fARB (GLint location, GLfloat v0); +GLAPI void APIENTRY glUniform2fARB (GLint location, GLfloat v0, GLfloat v1); +GLAPI void APIENTRY glUniform3fARB (GLint location, GLfloat v0, GLfloat v1, GLfloat v2); +GLAPI void APIENTRY glUniform4fARB (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3); +GLAPI void APIENTRY glUniform1iARB (GLint location, GLint v0); +GLAPI void APIENTRY glUniform2iARB (GLint location, GLint v0, GLint v1); +GLAPI void APIENTRY glUniform3iARB (GLint location, GLint v0, GLint v1, GLint v2); +GLAPI void APIENTRY glUniform4iARB (GLint location, GLint v0, GLint v1, GLint v2, GLint v3); +GLAPI void APIENTRY glUniform1fvARB (GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glUniform2fvARB (GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glUniform3fvARB (GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glUniform4fvARB (GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glUniform1ivARB (GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glUniform2ivARB (GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glUniform3ivARB (GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glUniform4ivARB (GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glUniformMatrix2fvARB (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glUniformMatrix3fvARB (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glUniformMatrix4fvARB (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glGetObjectParameterfvARB (GLhandleARB obj, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetObjectParameterivARB (GLhandleARB obj, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetInfoLogARB (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *infoLog); +GLAPI void APIENTRY glGetAttachedObjectsARB (GLhandleARB containerObj, GLsizei maxCount, GLsizei *count, GLhandleARB *obj); +GLAPI GLint APIENTRY glGetUniformLocationARB (GLhandleARB programObj, const GLcharARB *name); +GLAPI void APIENTRY glGetActiveUniformARB (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name); +GLAPI void APIENTRY glGetUniformfvARB (GLhandleARB programObj, GLint location, GLfloat *params); +GLAPI void APIENTRY glGetUniformivARB (GLhandleARB programObj, GLint location, GLint *params); +GLAPI void APIENTRY glGetShaderSourceARB (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *source); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDELETEOBJECTARBPROC) (GLhandleARB obj); +typedef GLhandleARB (APIENTRYP PFNGLGETHANDLEARBPROC) (GLenum pname); +typedef void (APIENTRYP PFNGLDETACHOBJECTARBPROC) (GLhandleARB containerObj, GLhandleARB attachedObj); +typedef GLhandleARB (APIENTRYP PFNGLCREATESHADEROBJECTARBPROC) (GLenum shaderType); +typedef void (APIENTRYP PFNGLSHADERSOURCEARBPROC) (GLhandleARB shaderObj, GLsizei count, const GLcharARB* *string, const GLint *length); +typedef void (APIENTRYP PFNGLCOMPILESHADERARBPROC) (GLhandleARB shaderObj); +typedef GLhandleARB (APIENTRYP PFNGLCREATEPROGRAMOBJECTARBPROC) (void); +typedef void (APIENTRYP PFNGLATTACHOBJECTARBPROC) (GLhandleARB containerObj, GLhandleARB obj); +typedef void (APIENTRYP PFNGLLINKPROGRAMARBPROC) (GLhandleARB programObj); +typedef void (APIENTRYP PFNGLUSEPROGRAMOBJECTARBPROC) (GLhandleARB programObj); +typedef void (APIENTRYP PFNGLVALIDATEPROGRAMARBPROC) (GLhandleARB programObj); +typedef void (APIENTRYP PFNGLUNIFORM1FARBPROC) (GLint location, GLfloat v0); +typedef void (APIENTRYP PFNGLUNIFORM2FARBPROC) (GLint location, GLfloat v0, GLfloat v1); +typedef void (APIENTRYP PFNGLUNIFORM3FARBPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2); +typedef void (APIENTRYP PFNGLUNIFORM4FARBPROC) (GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3); +typedef void (APIENTRYP PFNGLUNIFORM1IARBPROC) (GLint location, GLint v0); +typedef void (APIENTRYP PFNGLUNIFORM2IARBPROC) (GLint location, GLint v0, GLint v1); +typedef void (APIENTRYP PFNGLUNIFORM3IARBPROC) (GLint location, GLint v0, GLint v1, GLint v2); +typedef void (APIENTRYP PFNGLUNIFORM4IARBPROC) (GLint location, GLint v0, GLint v1, GLint v2, GLint v3); +typedef void (APIENTRYP PFNGLUNIFORM1FVARBPROC) (GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORM2FVARBPROC) (GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORM3FVARBPROC) (GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORM4FVARBPROC) (GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORM1IVARBPROC) (GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLUNIFORM2IVARBPROC) (GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLUNIFORM3IVARBPROC) (GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLUNIFORM4IVARBPROC) (GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX2FVARBPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX3FVARBPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX4FVARBPROC) (GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLGETOBJECTPARAMETERFVARBPROC) (GLhandleARB obj, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETOBJECTPARAMETERIVARBPROC) (GLhandleARB obj, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETINFOLOGARBPROC) (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *infoLog); +typedef void (APIENTRYP PFNGLGETATTACHEDOBJECTSARBPROC) (GLhandleARB containerObj, GLsizei maxCount, GLsizei *count, GLhandleARB *obj); +typedef GLint (APIENTRYP PFNGLGETUNIFORMLOCATIONARBPROC) (GLhandleARB programObj, const GLcharARB *name); +typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMARBPROC) (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name); +typedef void (APIENTRYP PFNGLGETUNIFORMFVARBPROC) (GLhandleARB programObj, GLint location, GLfloat *params); +typedef void (APIENTRYP PFNGLGETUNIFORMIVARBPROC) (GLhandleARB programObj, GLint location, GLint *params); +typedef void (APIENTRYP PFNGLGETSHADERSOURCEARBPROC) (GLhandleARB obj, GLsizei maxLength, GLsizei *length, GLcharARB *source); +#endif + +#ifndef GL_ARB_vertex_shader +#define GL_ARB_vertex_shader 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBindAttribLocationARB (GLhandleARB programObj, GLuint index, const GLcharARB *name); +GLAPI void APIENTRY glGetActiveAttribARB (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name); +GLAPI GLint APIENTRY glGetAttribLocationARB (GLhandleARB programObj, const GLcharARB *name); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBINDATTRIBLOCATIONARBPROC) (GLhandleARB programObj, GLuint index, const GLcharARB *name); +typedef void (APIENTRYP PFNGLGETACTIVEATTRIBARBPROC) (GLhandleARB programObj, GLuint index, GLsizei maxLength, GLsizei *length, GLint *size, GLenum *type, GLcharARB *name); +typedef GLint (APIENTRYP PFNGLGETATTRIBLOCATIONARBPROC) (GLhandleARB programObj, const GLcharARB *name); +#endif + +#ifndef GL_ARB_fragment_shader +#define GL_ARB_fragment_shader 1 +#endif + +#ifndef GL_ARB_shading_language_100 +#define GL_ARB_shading_language_100 1 +#endif + +#ifndef GL_ARB_texture_non_power_of_two +#define GL_ARB_texture_non_power_of_two 1 +#endif + +#ifndef GL_ARB_point_sprite +#define GL_ARB_point_sprite 1 +#endif + +#ifndef GL_ARB_fragment_program_shadow +#define GL_ARB_fragment_program_shadow 1 +#endif + +#ifndef GL_ARB_draw_buffers +#define GL_ARB_draw_buffers 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDrawBuffersARB (GLsizei n, const GLenum *bufs); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDRAWBUFFERSARBPROC) (GLsizei n, const GLenum *bufs); +#endif + +#ifndef GL_ARB_texture_rectangle +#define GL_ARB_texture_rectangle 1 +#endif + +#ifndef GL_ARB_color_buffer_float +#define GL_ARB_color_buffer_float 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glClampColorARB (GLenum target, GLenum clamp); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCLAMPCOLORARBPROC) (GLenum target, GLenum clamp); +#endif + +#ifndef GL_ARB_half_float_pixel +#define GL_ARB_half_float_pixel 1 +#endif + +#ifndef GL_ARB_texture_float +#define GL_ARB_texture_float 1 +#endif + +#ifndef GL_ARB_pixel_buffer_object +#define GL_ARB_pixel_buffer_object 1 +#endif + +#ifndef GL_ARB_depth_buffer_float +#define GL_ARB_depth_buffer_float 1 +#endif + +#ifndef GL_ARB_draw_instanced +#define GL_ARB_draw_instanced 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDrawArraysInstancedARB (GLenum mode, GLint first, GLsizei count, GLsizei primcount); +GLAPI void APIENTRY glDrawElementsInstancedARB (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDRAWARRAYSINSTANCEDARBPROC) (GLenum mode, GLint first, GLsizei count, GLsizei primcount); +typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDARBPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount); +#endif + +#ifndef GL_ARB_framebuffer_object +#define GL_ARB_framebuffer_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLboolean APIENTRY glIsRenderbuffer (GLuint renderbuffer); +GLAPI void APIENTRY glBindRenderbuffer (GLenum target, GLuint renderbuffer); +GLAPI void APIENTRY glDeleteRenderbuffers (GLsizei n, const GLuint *renderbuffers); +GLAPI void APIENTRY glGenRenderbuffers (GLsizei n, GLuint *renderbuffers); +GLAPI void APIENTRY glRenderbufferStorage (GLenum target, GLenum internalformat, GLsizei width, GLsizei height); +GLAPI void APIENTRY glGetRenderbufferParameteriv (GLenum target, GLenum pname, GLint *params); +GLAPI GLboolean APIENTRY glIsFramebuffer (GLuint framebuffer); +GLAPI void APIENTRY glBindFramebuffer (GLenum target, GLuint framebuffer); +GLAPI void APIENTRY glDeleteFramebuffers (GLsizei n, const GLuint *framebuffers); +GLAPI void APIENTRY glGenFramebuffers (GLsizei n, GLuint *framebuffers); +GLAPI GLenum APIENTRY glCheckFramebufferStatus (GLenum target); +GLAPI void APIENTRY glFramebufferTexture1D (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +GLAPI void APIENTRY glFramebufferTexture2D (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +GLAPI void APIENTRY glFramebufferTexture3D (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset); +GLAPI void APIENTRY glFramebufferRenderbuffer (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer); +GLAPI void APIENTRY glGetFramebufferAttachmentParameteriv (GLenum target, GLenum attachment, GLenum pname, GLint *params); +GLAPI void APIENTRY glGenerateMipmap (GLenum target); +GLAPI void APIENTRY glBlitFramebuffer (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter); +GLAPI void APIENTRY glRenderbufferStorageMultisample (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height); +GLAPI void APIENTRY glFramebufferTextureLayer (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLboolean (APIENTRYP PFNGLISRENDERBUFFERPROC) (GLuint renderbuffer); +typedef void (APIENTRYP PFNGLBINDRENDERBUFFERPROC) (GLenum target, GLuint renderbuffer); +typedef void (APIENTRYP PFNGLDELETERENDERBUFFERSPROC) (GLsizei n, const GLuint *renderbuffers); +typedef void (APIENTRYP PFNGLGENRENDERBUFFERSPROC) (GLsizei n, GLuint *renderbuffers); +typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLGETRENDERBUFFERPARAMETERIVPROC) (GLenum target, GLenum pname, GLint *params); +typedef GLboolean (APIENTRYP PFNGLISFRAMEBUFFERPROC) (GLuint framebuffer); +typedef void (APIENTRYP PFNGLBINDFRAMEBUFFERPROC) (GLenum target, GLuint framebuffer); +typedef void (APIENTRYP PFNGLDELETEFRAMEBUFFERSPROC) (GLsizei n, const GLuint *framebuffers); +typedef void (APIENTRYP PFNGLGENFRAMEBUFFERSPROC) (GLsizei n, GLuint *framebuffers); +typedef GLenum (APIENTRYP PFNGLCHECKFRAMEBUFFERSTATUSPROC) (GLenum target); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE1DPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE3DPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset); +typedef void (APIENTRYP PFNGLFRAMEBUFFERRENDERBUFFERPROC) (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer); +typedef void (APIENTRYP PFNGLGETFRAMEBUFFERATTACHMENTPARAMETERIVPROC) (GLenum target, GLenum attachment, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGENERATEMIPMAPPROC) (GLenum target); +typedef void (APIENTRYP PFNGLBLITFRAMEBUFFERPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter); +typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURELAYERPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer); +#endif + +#ifndef GL_ARB_framebuffer_sRGB +#define GL_ARB_framebuffer_sRGB 1 +#endif + +#ifndef GL_ARB_geometry_shader4 +#define GL_ARB_geometry_shader4 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glProgramParameteriARB (GLuint program, GLenum pname, GLint value); +GLAPI void APIENTRY glFramebufferTextureARB (GLenum target, GLenum attachment, GLuint texture, GLint level); +GLAPI void APIENTRY glFramebufferTextureLayerARB (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer); +GLAPI void APIENTRY glFramebufferTextureFaceARB (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPROGRAMPARAMETERIARBPROC) (GLuint program, GLenum pname, GLint value); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREARBPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURELAYERARBPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREFACEARBPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face); +#endif + +#ifndef GL_ARB_half_float_vertex +#define GL_ARB_half_float_vertex 1 +#endif + +#ifndef GL_ARB_instanced_arrays +#define GL_ARB_instanced_arrays 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexAttribDivisorARB (GLuint index, GLuint divisor); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXATTRIBDIVISORARBPROC) (GLuint index, GLuint divisor); +#endif + +#ifndef GL_ARB_map_buffer_range +#define GL_ARB_map_buffer_range 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLvoid* APIENTRY glMapBufferRange (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access); +GLAPI void APIENTRY glFlushMappedBufferRange (GLenum target, GLintptr offset, GLsizeiptr length); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLvoid* (APIENTRYP PFNGLMAPBUFFERRANGEPROC) (GLenum target, GLintptr offset, GLsizeiptr length, GLbitfield access); +typedef void (APIENTRYP PFNGLFLUSHMAPPEDBUFFERRANGEPROC) (GLenum target, GLintptr offset, GLsizeiptr length); +#endif + +#ifndef GL_ARB_texture_buffer_object +#define GL_ARB_texture_buffer_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTexBufferARB (GLenum target, GLenum internalformat, GLuint buffer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXBUFFERARBPROC) (GLenum target, GLenum internalformat, GLuint buffer); +#endif + +#ifndef GL_ARB_texture_compression_rgtc +#define GL_ARB_texture_compression_rgtc 1 +#endif + +#ifndef GL_ARB_texture_rg +#define GL_ARB_texture_rg 1 +#endif + +#ifndef GL_ARB_vertex_array_object +#define GL_ARB_vertex_array_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBindVertexArray (GLuint array); +GLAPI void APIENTRY glDeleteVertexArrays (GLsizei n, const GLuint *arrays); +GLAPI void APIENTRY glGenVertexArrays (GLsizei n, GLuint *arrays); +GLAPI GLboolean APIENTRY glIsVertexArray (GLuint array); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBINDVERTEXARRAYPROC) (GLuint array); +typedef void (APIENTRYP PFNGLDELETEVERTEXARRAYSPROC) (GLsizei n, const GLuint *arrays); +typedef void (APIENTRYP PFNGLGENVERTEXARRAYSPROC) (GLsizei n, GLuint *arrays); +typedef GLboolean (APIENTRYP PFNGLISVERTEXARRAYPROC) (GLuint array); +#endif + +#ifndef GL_ARB_uniform_buffer_object +#define GL_ARB_uniform_buffer_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGetUniformIndices (GLuint program, GLsizei uniformCount, const GLchar* *uniformNames, GLuint *uniformIndices); +GLAPI void APIENTRY glGetActiveUniformsiv (GLuint program, GLsizei uniformCount, const GLuint *uniformIndices, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetActiveUniformName (GLuint program, GLuint uniformIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformName); +GLAPI GLuint APIENTRY glGetUniformBlockIndex (GLuint program, const GLchar *uniformBlockName); +GLAPI void APIENTRY glGetActiveUniformBlockiv (GLuint program, GLuint uniformBlockIndex, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetActiveUniformBlockName (GLuint program, GLuint uniformBlockIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformBlockName); +GLAPI void APIENTRY glUniformBlockBinding (GLuint program, GLuint uniformBlockIndex, GLuint uniformBlockBinding); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGETUNIFORMINDICESPROC) (GLuint program, GLsizei uniformCount, const GLchar* *uniformNames, GLuint *uniformIndices); +typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMSIVPROC) (GLuint program, GLsizei uniformCount, const GLuint *uniformIndices, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMNAMEPROC) (GLuint program, GLuint uniformIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformName); +typedef GLuint (APIENTRYP PFNGLGETUNIFORMBLOCKINDEXPROC) (GLuint program, const GLchar *uniformBlockName); +typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMBLOCKIVPROC) (GLuint program, GLuint uniformBlockIndex, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETACTIVEUNIFORMBLOCKNAMEPROC) (GLuint program, GLuint uniformBlockIndex, GLsizei bufSize, GLsizei *length, GLchar *uniformBlockName); +typedef void (APIENTRYP PFNGLUNIFORMBLOCKBINDINGPROC) (GLuint program, GLuint uniformBlockIndex, GLuint uniformBlockBinding); +#endif + +#ifndef GL_ARB_compatibility +#define GL_ARB_compatibility 1 +#endif + +#ifndef GL_ARB_copy_buffer +#define GL_ARB_copy_buffer 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glCopyBufferSubData (GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOPYBUFFERSUBDATAPROC) (GLenum readTarget, GLenum writeTarget, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size); +#endif + +#ifndef GL_ARB_shader_texture_lod +#define GL_ARB_shader_texture_lod 1 +#endif + +#ifndef GL_ARB_depth_clamp +#define GL_ARB_depth_clamp 1 +#endif + +#ifndef GL_ARB_draw_elements_base_vertex +#define GL_ARB_draw_elements_base_vertex 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDrawElementsBaseVertex (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLint basevertex); +GLAPI void APIENTRY glDrawRangeElementsBaseVertex (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices, GLint basevertex); +GLAPI void APIENTRY glDrawElementsInstancedBaseVertex (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount, GLint basevertex); +GLAPI void APIENTRY glMultiDrawElementsBaseVertex (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* *indices, GLsizei primcount, const GLint *basevertex); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDRAWELEMENTSBASEVERTEXPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLint basevertex); +typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTSBASEVERTEXPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices, GLint basevertex); +typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDBASEVERTEXPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount, GLint basevertex); +typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSBASEVERTEXPROC) (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* *indices, GLsizei primcount, const GLint *basevertex); +#endif + +#ifndef GL_ARB_fragment_coord_conventions +#define GL_ARB_fragment_coord_conventions 1 +#endif + +#ifndef GL_ARB_provoking_vertex +#define GL_ARB_provoking_vertex 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glProvokingVertex (GLenum mode); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPROVOKINGVERTEXPROC) (GLenum mode); +#endif + +#ifndef GL_ARB_seamless_cube_map +#define GL_ARB_seamless_cube_map 1 +#endif + +#ifndef GL_ARB_sync +#define GL_ARB_sync 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLsync APIENTRY glFenceSync (GLenum condition, GLbitfield flags); +GLAPI GLboolean APIENTRY glIsSync (GLsync sync); +GLAPI void APIENTRY glDeleteSync (GLsync sync); +GLAPI GLenum APIENTRY glClientWaitSync (GLsync sync, GLbitfield flags, GLuint64 timeout); +GLAPI void APIENTRY glWaitSync (GLsync sync, GLbitfield flags, GLuint64 timeout); +GLAPI void APIENTRY glGetInteger64v (GLenum pname, GLint64 *params); +GLAPI void APIENTRY glGetSynciv (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLsync (APIENTRYP PFNGLFENCESYNCPROC) (GLenum condition, GLbitfield flags); +typedef GLboolean (APIENTRYP PFNGLISSYNCPROC) (GLsync sync); +typedef void (APIENTRYP PFNGLDELETESYNCPROC) (GLsync sync); +typedef GLenum (APIENTRYP PFNGLCLIENTWAITSYNCPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout); +typedef void (APIENTRYP PFNGLWAITSYNCPROC) (GLsync sync, GLbitfield flags, GLuint64 timeout); +typedef void (APIENTRYP PFNGLGETINTEGER64VPROC) (GLenum pname, GLint64 *params); +typedef void (APIENTRYP PFNGLGETSYNCIVPROC) (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values); +#endif + +#ifndef GL_ARB_texture_multisample +#define GL_ARB_texture_multisample 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTexImage2DMultisample (GLenum target, GLsizei samples, GLint internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations); +GLAPI void APIENTRY glTexImage3DMultisample (GLenum target, GLsizei samples, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations); +GLAPI void APIENTRY glGetMultisamplefv (GLenum pname, GLuint index, GLfloat *val); +GLAPI void APIENTRY glSampleMaski (GLuint index, GLbitfield mask); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXIMAGE2DMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLint internalformat, GLsizei width, GLsizei height, GLboolean fixedsamplelocations); +typedef void (APIENTRYP PFNGLTEXIMAGE3DMULTISAMPLEPROC) (GLenum target, GLsizei samples, GLint internalformat, GLsizei width, GLsizei height, GLsizei depth, GLboolean fixedsamplelocations); +typedef void (APIENTRYP PFNGLGETMULTISAMPLEFVPROC) (GLenum pname, GLuint index, GLfloat *val); +typedef void (APIENTRYP PFNGLSAMPLEMASKIPROC) (GLuint index, GLbitfield mask); +#endif + +#ifndef GL_ARB_vertex_array_bgra +#define GL_ARB_vertex_array_bgra 1 +#endif + +#ifndef GL_ARB_draw_buffers_blend +#define GL_ARB_draw_buffers_blend 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBlendEquationiARB (GLuint buf, GLenum mode); +GLAPI void APIENTRY glBlendEquationSeparateiARB (GLuint buf, GLenum modeRGB, GLenum modeAlpha); +GLAPI void APIENTRY glBlendFunciARB (GLuint buf, GLenum src, GLenum dst); +GLAPI void APIENTRY glBlendFuncSeparateiARB (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBLENDEQUATIONIARBPROC) (GLuint buf, GLenum mode); +typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEIARBPROC) (GLuint buf, GLenum modeRGB, GLenum modeAlpha); +typedef void (APIENTRYP PFNGLBLENDFUNCIARBPROC) (GLuint buf, GLenum src, GLenum dst); +typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEIARBPROC) (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha); +#endif + +#ifndef GL_ARB_sample_shading +#define GL_ARB_sample_shading 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glMinSampleShadingARB (GLclampf value); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLMINSAMPLESHADINGARBPROC) (GLclampf value); +#endif + +#ifndef GL_ARB_texture_cube_map_array +#define GL_ARB_texture_cube_map_array 1 +#endif + +#ifndef GL_ARB_texture_gather +#define GL_ARB_texture_gather 1 +#endif + +#ifndef GL_ARB_texture_query_lod +#define GL_ARB_texture_query_lod 1 +#endif + +#ifndef GL_ARB_shading_language_include +#define GL_ARB_shading_language_include 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glNamedStringARB (GLenum type, GLint namelen, const GLchar *name, GLint stringlen, const GLchar *string); +GLAPI void APIENTRY glDeleteNamedStringARB (GLint namelen, const GLchar *name); +GLAPI void APIENTRY glCompileShaderIncludeARB (GLuint shader, GLsizei count, const GLchar* *path, const GLint *length); +GLAPI GLboolean APIENTRY glIsNamedStringARB (GLint namelen, const GLchar *name); +GLAPI void APIENTRY glGetNamedStringARB (GLint namelen, const GLchar *name, GLsizei bufSize, GLint *stringlen, GLchar *string); +GLAPI void APIENTRY glGetNamedStringivARB (GLint namelen, const GLchar *name, GLenum pname, GLint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLNAMEDSTRINGARBPROC) (GLenum type, GLint namelen, const GLchar *name, GLint stringlen, const GLchar *string); +typedef void (APIENTRYP PFNGLDELETENAMEDSTRINGARBPROC) (GLint namelen, const GLchar *name); +typedef void (APIENTRYP PFNGLCOMPILESHADERINCLUDEARBPROC) (GLuint shader, GLsizei count, const GLchar* *path, const GLint *length); +typedef GLboolean (APIENTRYP PFNGLISNAMEDSTRINGARBPROC) (GLint namelen, const GLchar *name); +typedef void (APIENTRYP PFNGLGETNAMEDSTRINGARBPROC) (GLint namelen, const GLchar *name, GLsizei bufSize, GLint *stringlen, GLchar *string); +typedef void (APIENTRYP PFNGLGETNAMEDSTRINGIVARBPROC) (GLint namelen, const GLchar *name, GLenum pname, GLint *params); +#endif + +#ifndef GL_ARB_texture_compression_bptc +#define GL_ARB_texture_compression_bptc 1 +#endif + +#ifndef GL_ARB_blend_func_extended +#define GL_ARB_blend_func_extended 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBindFragDataLocationIndexed (GLuint program, GLuint colorNumber, GLuint index, const GLchar *name); +GLAPI GLint APIENTRY glGetFragDataIndex (GLuint program, const GLchar *name); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBINDFRAGDATALOCATIONINDEXEDPROC) (GLuint program, GLuint colorNumber, GLuint index, const GLchar *name); +typedef GLint (APIENTRYP PFNGLGETFRAGDATAINDEXPROC) (GLuint program, const GLchar *name); +#endif + +#ifndef GL_ARB_explicit_attrib_location +#define GL_ARB_explicit_attrib_location 1 +#endif + +#ifndef GL_ARB_occlusion_query2 +#define GL_ARB_occlusion_query2 1 +#endif + +#ifndef GL_ARB_sampler_objects +#define GL_ARB_sampler_objects 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGenSamplers (GLsizei count, GLuint *samplers); +GLAPI void APIENTRY glDeleteSamplers (GLsizei count, const GLuint *samplers); +GLAPI GLboolean APIENTRY glIsSampler (GLuint sampler); +GLAPI void APIENTRY glBindSampler (GLuint unit, GLuint sampler); +GLAPI void APIENTRY glSamplerParameteri (GLuint sampler, GLenum pname, GLint param); +GLAPI void APIENTRY glSamplerParameteriv (GLuint sampler, GLenum pname, const GLint *param); +GLAPI void APIENTRY glSamplerParameterf (GLuint sampler, GLenum pname, GLfloat param); +GLAPI void APIENTRY glSamplerParameterfv (GLuint sampler, GLenum pname, const GLfloat *param); +GLAPI void APIENTRY glSamplerParameterIiv (GLuint sampler, GLenum pname, const GLint *param); +GLAPI void APIENTRY glSamplerParameterIuiv (GLuint sampler, GLenum pname, const GLuint *param); +GLAPI void APIENTRY glGetSamplerParameteriv (GLuint sampler, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetSamplerParameterIiv (GLuint sampler, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetSamplerParameterfv (GLuint sampler, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetSamplerParameterIuiv (GLuint sampler, GLenum pname, GLuint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGENSAMPLERSPROC) (GLsizei count, GLuint *samplers); +typedef void (APIENTRYP PFNGLDELETESAMPLERSPROC) (GLsizei count, const GLuint *samplers); +typedef GLboolean (APIENTRYP PFNGLISSAMPLERPROC) (GLuint sampler); +typedef void (APIENTRYP PFNGLBINDSAMPLERPROC) (GLuint unit, GLuint sampler); +typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIPROC) (GLuint sampler, GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIVPROC) (GLuint sampler, GLenum pname, const GLint *param); +typedef void (APIENTRYP PFNGLSAMPLERPARAMETERFPROC) (GLuint sampler, GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLSAMPLERPARAMETERFVPROC) (GLuint sampler, GLenum pname, const GLfloat *param); +typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIIVPROC) (GLuint sampler, GLenum pname, const GLint *param); +typedef void (APIENTRYP PFNGLSAMPLERPARAMETERIUIVPROC) (GLuint sampler, GLenum pname, const GLuint *param); +typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERIVPROC) (GLuint sampler, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERIIVPROC) (GLuint sampler, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERFVPROC) (GLuint sampler, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETSAMPLERPARAMETERIUIVPROC) (GLuint sampler, GLenum pname, GLuint *params); +#endif + +#ifndef GL_ARB_texture_rgb10_a2ui +#define GL_ARB_texture_rgb10_a2ui 1 +#endif + +#ifndef GL_ARB_texture_swizzle +#define GL_ARB_texture_swizzle 1 +#endif + +#ifndef GL_ARB_timer_query +#define GL_ARB_timer_query 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glQueryCounter (GLuint id, GLenum target); +GLAPI void APIENTRY glGetQueryObjecti64v (GLuint id, GLenum pname, GLint64 *params); +GLAPI void APIENTRY glGetQueryObjectui64v (GLuint id, GLenum pname, GLuint64 *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLQUERYCOUNTERPROC) (GLuint id, GLenum target); +typedef void (APIENTRYP PFNGLGETQUERYOBJECTI64VPROC) (GLuint id, GLenum pname, GLint64 *params); +typedef void (APIENTRYP PFNGLGETQUERYOBJECTUI64VPROC) (GLuint id, GLenum pname, GLuint64 *params); +#endif + +#ifndef GL_ARB_vertex_type_2_10_10_10_rev +#define GL_ARB_vertex_type_2_10_10_10_rev 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexP2ui (GLenum type, GLuint value); +GLAPI void APIENTRY glVertexP2uiv (GLenum type, const GLuint *value); +GLAPI void APIENTRY glVertexP3ui (GLenum type, GLuint value); +GLAPI void APIENTRY glVertexP3uiv (GLenum type, const GLuint *value); +GLAPI void APIENTRY glVertexP4ui (GLenum type, GLuint value); +GLAPI void APIENTRY glVertexP4uiv (GLenum type, const GLuint *value); +GLAPI void APIENTRY glTexCoordP1ui (GLenum type, GLuint coords); +GLAPI void APIENTRY glTexCoordP1uiv (GLenum type, const GLuint *coords); +GLAPI void APIENTRY glTexCoordP2ui (GLenum type, GLuint coords); +GLAPI void APIENTRY glTexCoordP2uiv (GLenum type, const GLuint *coords); +GLAPI void APIENTRY glTexCoordP3ui (GLenum type, GLuint coords); +GLAPI void APIENTRY glTexCoordP3uiv (GLenum type, const GLuint *coords); +GLAPI void APIENTRY glTexCoordP4ui (GLenum type, GLuint coords); +GLAPI void APIENTRY glTexCoordP4uiv (GLenum type, const GLuint *coords); +GLAPI void APIENTRY glMultiTexCoordP1ui (GLenum texture, GLenum type, GLuint coords); +GLAPI void APIENTRY glMultiTexCoordP1uiv (GLenum texture, GLenum type, const GLuint *coords); +GLAPI void APIENTRY glMultiTexCoordP2ui (GLenum texture, GLenum type, GLuint coords); +GLAPI void APIENTRY glMultiTexCoordP2uiv (GLenum texture, GLenum type, const GLuint *coords); +GLAPI void APIENTRY glMultiTexCoordP3ui (GLenum texture, GLenum type, GLuint coords); +GLAPI void APIENTRY glMultiTexCoordP3uiv (GLenum texture, GLenum type, const GLuint *coords); +GLAPI void APIENTRY glMultiTexCoordP4ui (GLenum texture, GLenum type, GLuint coords); +GLAPI void APIENTRY glMultiTexCoordP4uiv (GLenum texture, GLenum type, const GLuint *coords); +GLAPI void APIENTRY glNormalP3ui (GLenum type, GLuint coords); +GLAPI void APIENTRY glNormalP3uiv (GLenum type, const GLuint *coords); +GLAPI void APIENTRY glColorP3ui (GLenum type, GLuint color); +GLAPI void APIENTRY glColorP3uiv (GLenum type, const GLuint *color); +GLAPI void APIENTRY glColorP4ui (GLenum type, GLuint color); +GLAPI void APIENTRY glColorP4uiv (GLenum type, const GLuint *color); +GLAPI void APIENTRY glSecondaryColorP3ui (GLenum type, GLuint color); +GLAPI void APIENTRY glSecondaryColorP3uiv (GLenum type, const GLuint *color); +GLAPI void APIENTRY glVertexAttribP1ui (GLuint index, GLenum type, GLboolean normalized, GLuint value); +GLAPI void APIENTRY glVertexAttribP1uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value); +GLAPI void APIENTRY glVertexAttribP2ui (GLuint index, GLenum type, GLboolean normalized, GLuint value); +GLAPI void APIENTRY glVertexAttribP2uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value); +GLAPI void APIENTRY glVertexAttribP3ui (GLuint index, GLenum type, GLboolean normalized, GLuint value); +GLAPI void APIENTRY glVertexAttribP3uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value); +GLAPI void APIENTRY glVertexAttribP4ui (GLuint index, GLenum type, GLboolean normalized, GLuint value); +GLAPI void APIENTRY glVertexAttribP4uiv (GLuint index, GLenum type, GLboolean normalized, const GLuint *value); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXP2UIPROC) (GLenum type, GLuint value); +typedef void (APIENTRYP PFNGLVERTEXP2UIVPROC) (GLenum type, const GLuint *value); +typedef void (APIENTRYP PFNGLVERTEXP3UIPROC) (GLenum type, GLuint value); +typedef void (APIENTRYP PFNGLVERTEXP3UIVPROC) (GLenum type, const GLuint *value); +typedef void (APIENTRYP PFNGLVERTEXP4UIPROC) (GLenum type, GLuint value); +typedef void (APIENTRYP PFNGLVERTEXP4UIVPROC) (GLenum type, const GLuint *value); +typedef void (APIENTRYP PFNGLTEXCOORDP1UIPROC) (GLenum type, GLuint coords); +typedef void (APIENTRYP PFNGLTEXCOORDP1UIVPROC) (GLenum type, const GLuint *coords); +typedef void (APIENTRYP PFNGLTEXCOORDP2UIPROC) (GLenum type, GLuint coords); +typedef void (APIENTRYP PFNGLTEXCOORDP2UIVPROC) (GLenum type, const GLuint *coords); +typedef void (APIENTRYP PFNGLTEXCOORDP3UIPROC) (GLenum type, GLuint coords); +typedef void (APIENTRYP PFNGLTEXCOORDP3UIVPROC) (GLenum type, const GLuint *coords); +typedef void (APIENTRYP PFNGLTEXCOORDP4UIPROC) (GLenum type, GLuint coords); +typedef void (APIENTRYP PFNGLTEXCOORDP4UIVPROC) (GLenum type, const GLuint *coords); +typedef void (APIENTRYP PFNGLMULTITEXCOORDP1UIPROC) (GLenum texture, GLenum type, GLuint coords); +typedef void (APIENTRYP PFNGLMULTITEXCOORDP1UIVPROC) (GLenum texture, GLenum type, const GLuint *coords); +typedef void (APIENTRYP PFNGLMULTITEXCOORDP2UIPROC) (GLenum texture, GLenum type, GLuint coords); +typedef void (APIENTRYP PFNGLMULTITEXCOORDP2UIVPROC) (GLenum texture, GLenum type, const GLuint *coords); +typedef void (APIENTRYP PFNGLMULTITEXCOORDP3UIPROC) (GLenum texture, GLenum type, GLuint coords); +typedef void (APIENTRYP PFNGLMULTITEXCOORDP3UIVPROC) (GLenum texture, GLenum type, const GLuint *coords); +typedef void (APIENTRYP PFNGLMULTITEXCOORDP4UIPROC) (GLenum texture, GLenum type, GLuint coords); +typedef void (APIENTRYP PFNGLMULTITEXCOORDP4UIVPROC) (GLenum texture, GLenum type, const GLuint *coords); +typedef void (APIENTRYP PFNGLNORMALP3UIPROC) (GLenum type, GLuint coords); +typedef void (APIENTRYP PFNGLNORMALP3UIVPROC) (GLenum type, const GLuint *coords); +typedef void (APIENTRYP PFNGLCOLORP3UIPROC) (GLenum type, GLuint color); +typedef void (APIENTRYP PFNGLCOLORP3UIVPROC) (GLenum type, const GLuint *color); +typedef void (APIENTRYP PFNGLCOLORP4UIPROC) (GLenum type, GLuint color); +typedef void (APIENTRYP PFNGLCOLORP4UIVPROC) (GLenum type, const GLuint *color); +typedef void (APIENTRYP PFNGLSECONDARYCOLORP3UIPROC) (GLenum type, GLuint color); +typedef void (APIENTRYP PFNGLSECONDARYCOLORP3UIVPROC) (GLenum type, const GLuint *color); +typedef void (APIENTRYP PFNGLVERTEXATTRIBP1UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value); +typedef void (APIENTRYP PFNGLVERTEXATTRIBP1UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value); +typedef void (APIENTRYP PFNGLVERTEXATTRIBP2UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value); +typedef void (APIENTRYP PFNGLVERTEXATTRIBP2UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value); +typedef void (APIENTRYP PFNGLVERTEXATTRIBP3UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value); +typedef void (APIENTRYP PFNGLVERTEXATTRIBP3UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value); +typedef void (APIENTRYP PFNGLVERTEXATTRIBP4UIPROC) (GLuint index, GLenum type, GLboolean normalized, GLuint value); +typedef void (APIENTRYP PFNGLVERTEXATTRIBP4UIVPROC) (GLuint index, GLenum type, GLboolean normalized, const GLuint *value); +#endif + +#ifndef GL_ARB_draw_indirect +#define GL_ARB_draw_indirect 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDrawArraysIndirect (GLenum mode, const GLvoid *indirect); +GLAPI void APIENTRY glDrawElementsIndirect (GLenum mode, GLenum type, const GLvoid *indirect); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDRAWARRAYSINDIRECTPROC) (GLenum mode, const GLvoid *indirect); +typedef void (APIENTRYP PFNGLDRAWELEMENTSINDIRECTPROC) (GLenum mode, GLenum type, const GLvoid *indirect); +#endif + +#ifndef GL_ARB_gpu_shader5 +#define GL_ARB_gpu_shader5 1 +#endif + +#ifndef GL_ARB_gpu_shader_fp64 +#define GL_ARB_gpu_shader_fp64 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glUniform1d (GLint location, GLdouble x); +GLAPI void APIENTRY glUniform2d (GLint location, GLdouble x, GLdouble y); +GLAPI void APIENTRY glUniform3d (GLint location, GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glUniform4d (GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glUniform1dv (GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glUniform2dv (GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glUniform3dv (GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glUniform4dv (GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glUniformMatrix2dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glUniformMatrix3dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glUniformMatrix4dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glUniformMatrix2x3dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glUniformMatrix2x4dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glUniformMatrix3x2dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glUniformMatrix3x4dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glUniformMatrix4x2dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glUniformMatrix4x3dv (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glGetUniformdv (GLuint program, GLint location, GLdouble *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLUNIFORM1DPROC) (GLint location, GLdouble x); +typedef void (APIENTRYP PFNGLUNIFORM2DPROC) (GLint location, GLdouble x, GLdouble y); +typedef void (APIENTRYP PFNGLUNIFORM3DPROC) (GLint location, GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLUNIFORM4DPROC) (GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLUNIFORM1DVPROC) (GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORM2DVPROC) (GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORM3DVPROC) (GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORM4DVPROC) (GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX2DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX3DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX4DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X3DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX2X4DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X2DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX3X4DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X2DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLUNIFORMMATRIX4X3DVPROC) (GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLGETUNIFORMDVPROC) (GLuint program, GLint location, GLdouble *params); +#endif + +#ifndef GL_ARB_shader_subroutine +#define GL_ARB_shader_subroutine 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLint APIENTRY glGetSubroutineUniformLocation (GLuint program, GLenum shadertype, const GLchar *name); +GLAPI GLuint APIENTRY glGetSubroutineIndex (GLuint program, GLenum shadertype, const GLchar *name); +GLAPI void APIENTRY glGetActiveSubroutineUniformiv (GLuint program, GLenum shadertype, GLuint index, GLenum pname, GLint *values); +GLAPI void APIENTRY glGetActiveSubroutineUniformName (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name); +GLAPI void APIENTRY glGetActiveSubroutineName (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name); +GLAPI void APIENTRY glUniformSubroutinesuiv (GLenum shadertype, GLsizei count, const GLuint *indices); +GLAPI void APIENTRY glGetUniformSubroutineuiv (GLenum shadertype, GLint location, GLuint *params); +GLAPI void APIENTRY glGetProgramStageiv (GLuint program, GLenum shadertype, GLenum pname, GLint *values); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLint (APIENTRYP PFNGLGETSUBROUTINEUNIFORMLOCATIONPROC) (GLuint program, GLenum shadertype, const GLchar *name); +typedef GLuint (APIENTRYP PFNGLGETSUBROUTINEINDEXPROC) (GLuint program, GLenum shadertype, const GLchar *name); +typedef void (APIENTRYP PFNGLGETACTIVESUBROUTINEUNIFORMIVPROC) (GLuint program, GLenum shadertype, GLuint index, GLenum pname, GLint *values); +typedef void (APIENTRYP PFNGLGETACTIVESUBROUTINEUNIFORMNAMEPROC) (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name); +typedef void (APIENTRYP PFNGLGETACTIVESUBROUTINENAMEPROC) (GLuint program, GLenum shadertype, GLuint index, GLsizei bufsize, GLsizei *length, GLchar *name); +typedef void (APIENTRYP PFNGLUNIFORMSUBROUTINESUIVPROC) (GLenum shadertype, GLsizei count, const GLuint *indices); +typedef void (APIENTRYP PFNGLGETUNIFORMSUBROUTINEUIVPROC) (GLenum shadertype, GLint location, GLuint *params); +typedef void (APIENTRYP PFNGLGETPROGRAMSTAGEIVPROC) (GLuint program, GLenum shadertype, GLenum pname, GLint *values); +#endif + +#ifndef GL_ARB_tessellation_shader +#define GL_ARB_tessellation_shader 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPatchParameteri (GLenum pname, GLint value); +GLAPI void APIENTRY glPatchParameterfv (GLenum pname, const GLfloat *values); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPATCHPARAMETERIPROC) (GLenum pname, GLint value); +typedef void (APIENTRYP PFNGLPATCHPARAMETERFVPROC) (GLenum pname, const GLfloat *values); +#endif + +#ifndef GL_ARB_texture_buffer_object_rgb32 +#define GL_ARB_texture_buffer_object_rgb32 1 +#endif + +#ifndef GL_ARB_transform_feedback2 +#define GL_ARB_transform_feedback2 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBindTransformFeedback (GLenum target, GLuint id); +GLAPI void APIENTRY glDeleteTransformFeedbacks (GLsizei n, const GLuint *ids); +GLAPI void APIENTRY glGenTransformFeedbacks (GLsizei n, GLuint *ids); +GLAPI GLboolean APIENTRY glIsTransformFeedback (GLuint id); +GLAPI void APIENTRY glPauseTransformFeedback (void); +GLAPI void APIENTRY glResumeTransformFeedback (void); +GLAPI void APIENTRY glDrawTransformFeedback (GLenum mode, GLuint id); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBINDTRANSFORMFEEDBACKPROC) (GLenum target, GLuint id); +typedef void (APIENTRYP PFNGLDELETETRANSFORMFEEDBACKSPROC) (GLsizei n, const GLuint *ids); +typedef void (APIENTRYP PFNGLGENTRANSFORMFEEDBACKSPROC) (GLsizei n, GLuint *ids); +typedef GLboolean (APIENTRYP PFNGLISTRANSFORMFEEDBACKPROC) (GLuint id); +typedef void (APIENTRYP PFNGLPAUSETRANSFORMFEEDBACKPROC) (void); +typedef void (APIENTRYP PFNGLRESUMETRANSFORMFEEDBACKPROC) (void); +typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKPROC) (GLenum mode, GLuint id); +#endif + +#ifndef GL_ARB_transform_feedback3 +#define GL_ARB_transform_feedback3 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDrawTransformFeedbackStream (GLenum mode, GLuint id, GLuint stream); +GLAPI void APIENTRY glBeginQueryIndexed (GLenum target, GLuint index, GLuint id); +GLAPI void APIENTRY glEndQueryIndexed (GLenum target, GLuint index); +GLAPI void APIENTRY glGetQueryIndexediv (GLenum target, GLuint index, GLenum pname, GLint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKSTREAMPROC) (GLenum mode, GLuint id, GLuint stream); +typedef void (APIENTRYP PFNGLBEGINQUERYINDEXEDPROC) (GLenum target, GLuint index, GLuint id); +typedef void (APIENTRYP PFNGLENDQUERYINDEXEDPROC) (GLenum target, GLuint index); +typedef void (APIENTRYP PFNGLGETQUERYINDEXEDIVPROC) (GLenum target, GLuint index, GLenum pname, GLint *params); +#endif + +#ifndef GL_ARB_ES2_compatibility +#define GL_ARB_ES2_compatibility 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glReleaseShaderCompiler (void); +GLAPI void APIENTRY glShaderBinary (GLsizei count, const GLuint *shaders, GLenum binaryformat, const GLvoid *binary, GLsizei length); +GLAPI void APIENTRY glGetShaderPrecisionFormat (GLenum shadertype, GLenum precisiontype, GLint *range, GLint *precision); +GLAPI void APIENTRY glDepthRangef (GLclampf n, GLclampf f); +GLAPI void APIENTRY glClearDepthf (GLclampf d); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLRELEASESHADERCOMPILERPROC) (void); +typedef void (APIENTRYP PFNGLSHADERBINARYPROC) (GLsizei count, const GLuint *shaders, GLenum binaryformat, const GLvoid *binary, GLsizei length); +typedef void (APIENTRYP PFNGLGETSHADERPRECISIONFORMATPROC) (GLenum shadertype, GLenum precisiontype, GLint *range, GLint *precision); +typedef void (APIENTRYP PFNGLDEPTHRANGEFPROC) (GLclampf n, GLclampf f); +typedef void (APIENTRYP PFNGLCLEARDEPTHFPROC) (GLclampf d); +#endif + +#ifndef GL_ARB_get_program_binary +#define GL_ARB_get_program_binary 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGetProgramBinary (GLuint program, GLsizei bufSize, GLsizei *length, GLenum *binaryFormat, GLvoid *binary); +GLAPI void APIENTRY glProgramBinary (GLuint program, GLenum binaryFormat, const GLvoid *binary, GLsizei length); +GLAPI void APIENTRY glProgramParameteri (GLuint program, GLenum pname, GLint value); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGETPROGRAMBINARYPROC) (GLuint program, GLsizei bufSize, GLsizei *length, GLenum *binaryFormat, GLvoid *binary); +typedef void (APIENTRYP PFNGLPROGRAMBINARYPROC) (GLuint program, GLenum binaryFormat, const GLvoid *binary, GLsizei length); +typedef void (APIENTRYP PFNGLPROGRAMPARAMETERIPROC) (GLuint program, GLenum pname, GLint value); +#endif + +#ifndef GL_ARB_separate_shader_objects +#define GL_ARB_separate_shader_objects 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glUseProgramStages (GLuint pipeline, GLbitfield stages, GLuint program); +GLAPI void APIENTRY glActiveShaderProgram (GLuint pipeline, GLuint program); +GLAPI GLuint APIENTRY glCreateShaderProgramv (GLenum type, GLsizei count, const GLchar* *strings); +GLAPI void APIENTRY glBindProgramPipeline (GLuint pipeline); +GLAPI void APIENTRY glDeleteProgramPipelines (GLsizei n, const GLuint *pipelines); +GLAPI void APIENTRY glGenProgramPipelines (GLsizei n, GLuint *pipelines); +GLAPI GLboolean APIENTRY glIsProgramPipeline (GLuint pipeline); +GLAPI void APIENTRY glGetProgramPipelineiv (GLuint pipeline, GLenum pname, GLint *params); +GLAPI void APIENTRY glProgramUniform1i (GLuint program, GLint location, GLint v0); +GLAPI void APIENTRY glProgramUniform1iv (GLuint program, GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glProgramUniform1f (GLuint program, GLint location, GLfloat v0); +GLAPI void APIENTRY glProgramUniform1fv (GLuint program, GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glProgramUniform1d (GLuint program, GLint location, GLdouble v0); +GLAPI void APIENTRY glProgramUniform1dv (GLuint program, GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glProgramUniform1ui (GLuint program, GLint location, GLuint v0); +GLAPI void APIENTRY glProgramUniform1uiv (GLuint program, GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glProgramUniform2i (GLuint program, GLint location, GLint v0, GLint v1); +GLAPI void APIENTRY glProgramUniform2iv (GLuint program, GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glProgramUniform2f (GLuint program, GLint location, GLfloat v0, GLfloat v1); +GLAPI void APIENTRY glProgramUniform2fv (GLuint program, GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glProgramUniform2d (GLuint program, GLint location, GLdouble v0, GLdouble v1); +GLAPI void APIENTRY glProgramUniform2dv (GLuint program, GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glProgramUniform2ui (GLuint program, GLint location, GLuint v0, GLuint v1); +GLAPI void APIENTRY glProgramUniform2uiv (GLuint program, GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glProgramUniform3i (GLuint program, GLint location, GLint v0, GLint v1, GLint v2); +GLAPI void APIENTRY glProgramUniform3iv (GLuint program, GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glProgramUniform3f (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2); +GLAPI void APIENTRY glProgramUniform3fv (GLuint program, GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glProgramUniform3d (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2); +GLAPI void APIENTRY glProgramUniform3dv (GLuint program, GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glProgramUniform3ui (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2); +GLAPI void APIENTRY glProgramUniform3uiv (GLuint program, GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glProgramUniform4i (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3); +GLAPI void APIENTRY glProgramUniform4iv (GLuint program, GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glProgramUniform4f (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3); +GLAPI void APIENTRY glProgramUniform4fv (GLuint program, GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glProgramUniform4d (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2, GLdouble v3); +GLAPI void APIENTRY glProgramUniform4dv (GLuint program, GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glProgramUniform4ui (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3); +GLAPI void APIENTRY glProgramUniform4uiv (GLuint program, GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glProgramUniformMatrix2fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix3fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix4fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix2dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix3dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix4dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix2x3fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix3x2fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix2x4fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix4x2fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix3x4fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix4x3fv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix2x3dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix3x2dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix2x4dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix4x2dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix3x4dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix4x3dv (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glValidateProgramPipeline (GLuint pipeline); +GLAPI void APIENTRY glGetProgramPipelineInfoLog (GLuint pipeline, GLsizei bufSize, GLsizei *length, GLchar *infoLog); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLUSEPROGRAMSTAGESPROC) (GLuint pipeline, GLbitfield stages, GLuint program); +typedef void (APIENTRYP PFNGLACTIVESHADERPROGRAMPROC) (GLuint pipeline, GLuint program); +typedef GLuint (APIENTRYP PFNGLCREATESHADERPROGRAMVPROC) (GLenum type, GLsizei count, const GLchar* *strings); +typedef void (APIENTRYP PFNGLBINDPROGRAMPIPELINEPROC) (GLuint pipeline); +typedef void (APIENTRYP PFNGLDELETEPROGRAMPIPELINESPROC) (GLsizei n, const GLuint *pipelines); +typedef void (APIENTRYP PFNGLGENPROGRAMPIPELINESPROC) (GLsizei n, GLuint *pipelines); +typedef GLboolean (APIENTRYP PFNGLISPROGRAMPIPELINEPROC) (GLuint pipeline); +typedef void (APIENTRYP PFNGLGETPROGRAMPIPELINEIVPROC) (GLuint pipeline, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IPROC) (GLuint program, GLint location, GLint v0); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FPROC) (GLuint program, GLint location, GLfloat v0); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DPROC) (GLuint program, GLint location, GLdouble v0); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIPROC) (GLuint program, GLint location, GLuint v0); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IPROC) (GLuint program, GLint location, GLint v0, GLint v1); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DPROC) (GLuint program, GLint location, GLdouble v0, GLdouble v1); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIPROC) (GLuint program, GLint location, GLuint v0, GLuint v1); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DPROC) (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IVPROC) (GLuint program, GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FVPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DPROC) (GLuint program, GLint location, GLdouble v0, GLdouble v1, GLdouble v2, GLdouble v3); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DVPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIVPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3FVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3DVPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLVALIDATEPROGRAMPIPELINEPROC) (GLuint pipeline); +typedef void (APIENTRYP PFNGLGETPROGRAMPIPELINEINFOLOGPROC) (GLuint pipeline, GLsizei bufSize, GLsizei *length, GLchar *infoLog); +#endif + +#ifndef GL_ARB_vertex_attrib_64bit +#define GL_ARB_vertex_attrib_64bit 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexAttribL1d (GLuint index, GLdouble x); +GLAPI void APIENTRY glVertexAttribL2d (GLuint index, GLdouble x, GLdouble y); +GLAPI void APIENTRY glVertexAttribL3d (GLuint index, GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glVertexAttribL4d (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glVertexAttribL1dv (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribL2dv (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribL3dv (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribL4dv (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribLPointer (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +GLAPI void APIENTRY glGetVertexAttribLdv (GLuint index, GLenum pname, GLdouble *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DPROC) (GLuint index, GLdouble x); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DPROC) (GLuint index, GLdouble x, GLdouble y); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBLPOINTERPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLDVPROC) (GLuint index, GLenum pname, GLdouble *params); +#endif + +#ifndef GL_ARB_viewport_array +#define GL_ARB_viewport_array 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glViewportArrayv (GLuint first, GLsizei count, const GLfloat *v); +GLAPI void APIENTRY glViewportIndexedf (GLuint index, GLfloat x, GLfloat y, GLfloat w, GLfloat h); +GLAPI void APIENTRY glViewportIndexedfv (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glScissorArrayv (GLuint first, GLsizei count, const GLint *v); +GLAPI void APIENTRY glScissorIndexed (GLuint index, GLint left, GLint bottom, GLsizei width, GLsizei height); +GLAPI void APIENTRY glScissorIndexedv (GLuint index, const GLint *v); +GLAPI void APIENTRY glDepthRangeArrayv (GLuint first, GLsizei count, const GLclampd *v); +GLAPI void APIENTRY glDepthRangeIndexed (GLuint index, GLclampd n, GLclampd f); +GLAPI void APIENTRY glGetFloati_v (GLenum target, GLuint index, GLfloat *data); +GLAPI void APIENTRY glGetDoublei_v (GLenum target, GLuint index, GLdouble *data); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVIEWPORTARRAYVPROC) (GLuint first, GLsizei count, const GLfloat *v); +typedef void (APIENTRYP PFNGLVIEWPORTINDEXEDFPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat w, GLfloat h); +typedef void (APIENTRYP PFNGLVIEWPORTINDEXEDFVPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLSCISSORARRAYVPROC) (GLuint first, GLsizei count, const GLint *v); +typedef void (APIENTRYP PFNGLSCISSORINDEXEDPROC) (GLuint index, GLint left, GLint bottom, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLSCISSORINDEXEDVPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLDEPTHRANGEARRAYVPROC) (GLuint first, GLsizei count, const GLclampd *v); +typedef void (APIENTRYP PFNGLDEPTHRANGEINDEXEDPROC) (GLuint index, GLclampd n, GLclampd f); +typedef void (APIENTRYP PFNGLGETFLOATI_VPROC) (GLenum target, GLuint index, GLfloat *data); +typedef void (APIENTRYP PFNGLGETDOUBLEI_VPROC) (GLenum target, GLuint index, GLdouble *data); +#endif + +#ifndef GL_ARB_cl_event +#define GL_ARB_cl_event 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLsync APIENTRY glCreateSyncFromCLeventARB (struct _cl_context * context, struct _cl_event * event, GLbitfield flags); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLsync (APIENTRYP PFNGLCREATESYNCFROMCLEVENTARBPROC) (struct _cl_context * context, struct _cl_event * event, GLbitfield flags); +#endif + +#ifndef GL_ARB_debug_output +#define GL_ARB_debug_output 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDebugMessageControlARB (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled); +GLAPI void APIENTRY glDebugMessageInsertARB (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf); +GLAPI void APIENTRY glDebugMessageCallbackARB (GLDEBUGPROCARB callback, const GLvoid *userParam); +GLAPI GLuint APIENTRY glGetDebugMessageLogARB (GLuint count, GLsizei bufsize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDEBUGMESSAGECONTROLARBPROC) (GLenum source, GLenum type, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled); +typedef void (APIENTRYP PFNGLDEBUGMESSAGEINSERTARBPROC) (GLenum source, GLenum type, GLuint id, GLenum severity, GLsizei length, const GLchar *buf); +typedef void (APIENTRYP PFNGLDEBUGMESSAGECALLBACKARBPROC) (GLDEBUGPROCARB callback, const GLvoid *userParam); +typedef GLuint (APIENTRYP PFNGLGETDEBUGMESSAGELOGARBPROC) (GLuint count, GLsizei bufsize, GLenum *sources, GLenum *types, GLuint *ids, GLenum *severities, GLsizei *lengths, GLchar *messageLog); +#endif + +#ifndef GL_ARB_robustness +#define GL_ARB_robustness 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLenum APIENTRY glGetGraphicsResetStatusARB (void); +GLAPI void APIENTRY glGetnMapdvARB (GLenum target, GLenum query, GLsizei bufSize, GLdouble *v); +GLAPI void APIENTRY glGetnMapfvARB (GLenum target, GLenum query, GLsizei bufSize, GLfloat *v); +GLAPI void APIENTRY glGetnMapivARB (GLenum target, GLenum query, GLsizei bufSize, GLint *v); +GLAPI void APIENTRY glGetnPixelMapfvARB (GLenum map, GLsizei bufSize, GLfloat *values); +GLAPI void APIENTRY glGetnPixelMapuivARB (GLenum map, GLsizei bufSize, GLuint *values); +GLAPI void APIENTRY glGetnPixelMapusvARB (GLenum map, GLsizei bufSize, GLushort *values); +GLAPI void APIENTRY glGetnPolygonStippleARB (GLsizei bufSize, GLubyte *pattern); +GLAPI void APIENTRY glGetnColorTableARB (GLenum target, GLenum format, GLenum type, GLsizei bufSize, GLvoid *table); +GLAPI void APIENTRY glGetnConvolutionFilterARB (GLenum target, GLenum format, GLenum type, GLsizei bufSize, GLvoid *image); +GLAPI void APIENTRY glGetnSeparableFilterARB (GLenum target, GLenum format, GLenum type, GLsizei rowBufSize, GLvoid *row, GLsizei columnBufSize, GLvoid *column, GLvoid *span); +GLAPI void APIENTRY glGetnHistogramARB (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, GLvoid *values); +GLAPI void APIENTRY glGetnMinmaxARB (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, GLvoid *values); +GLAPI void APIENTRY glGetnTexImageARB (GLenum target, GLint level, GLenum format, GLenum type, GLsizei bufSize, GLvoid *img); +GLAPI void APIENTRY glReadnPixelsARB (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, GLvoid *data); +GLAPI void APIENTRY glGetnCompressedTexImageARB (GLenum target, GLint lod, GLsizei bufSize, GLvoid *img); +GLAPI void APIENTRY glGetnUniformfvARB (GLuint program, GLint location, GLsizei bufSize, GLfloat *params); +GLAPI void APIENTRY glGetnUniformivARB (GLuint program, GLint location, GLsizei bufSize, GLint *params); +GLAPI void APIENTRY glGetnUniformuivARB (GLuint program, GLint location, GLsizei bufSize, GLuint *params); +GLAPI void APIENTRY glGetnUniformdvARB (GLuint program, GLint location, GLsizei bufSize, GLdouble *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLenum (APIENTRYP PFNGLGETGRAPHICSRESETSTATUSARBPROC) (void); +typedef void (APIENTRYP PFNGLGETNMAPDVARBPROC) (GLenum target, GLenum query, GLsizei bufSize, GLdouble *v); +typedef void (APIENTRYP PFNGLGETNMAPFVARBPROC) (GLenum target, GLenum query, GLsizei bufSize, GLfloat *v); +typedef void (APIENTRYP PFNGLGETNMAPIVARBPROC) (GLenum target, GLenum query, GLsizei bufSize, GLint *v); +typedef void (APIENTRYP PFNGLGETNPIXELMAPFVARBPROC) (GLenum map, GLsizei bufSize, GLfloat *values); +typedef void (APIENTRYP PFNGLGETNPIXELMAPUIVARBPROC) (GLenum map, GLsizei bufSize, GLuint *values); +typedef void (APIENTRYP PFNGLGETNPIXELMAPUSVARBPROC) (GLenum map, GLsizei bufSize, GLushort *values); +typedef void (APIENTRYP PFNGLGETNPOLYGONSTIPPLEARBPROC) (GLsizei bufSize, GLubyte *pattern); +typedef void (APIENTRYP PFNGLGETNCOLORTABLEARBPROC) (GLenum target, GLenum format, GLenum type, GLsizei bufSize, GLvoid *table); +typedef void (APIENTRYP PFNGLGETNCONVOLUTIONFILTERARBPROC) (GLenum target, GLenum format, GLenum type, GLsizei bufSize, GLvoid *image); +typedef void (APIENTRYP PFNGLGETNSEPARABLEFILTERARBPROC) (GLenum target, GLenum format, GLenum type, GLsizei rowBufSize, GLvoid *row, GLsizei columnBufSize, GLvoid *column, GLvoid *span); +typedef void (APIENTRYP PFNGLGETNHISTOGRAMARBPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, GLvoid *values); +typedef void (APIENTRYP PFNGLGETNMINMAXARBPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLsizei bufSize, GLvoid *values); +typedef void (APIENTRYP PFNGLGETNTEXIMAGEARBPROC) (GLenum target, GLint level, GLenum format, GLenum type, GLsizei bufSize, GLvoid *img); +typedef void (APIENTRYP PFNGLREADNPIXELSARBPROC) (GLint x, GLint y, GLsizei width, GLsizei height, GLenum format, GLenum type, GLsizei bufSize, GLvoid *data); +typedef void (APIENTRYP PFNGLGETNCOMPRESSEDTEXIMAGEARBPROC) (GLenum target, GLint lod, GLsizei bufSize, GLvoid *img); +typedef void (APIENTRYP PFNGLGETNUNIFORMFVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLfloat *params); +typedef void (APIENTRYP PFNGLGETNUNIFORMIVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLint *params); +typedef void (APIENTRYP PFNGLGETNUNIFORMUIVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLuint *params); +typedef void (APIENTRYP PFNGLGETNUNIFORMDVARBPROC) (GLuint program, GLint location, GLsizei bufSize, GLdouble *params); +#endif + +#ifndef GL_ARB_shader_stencil_export +#define GL_ARB_shader_stencil_export 1 +#endif + +#ifndef GL_EXT_abgr +#define GL_EXT_abgr 1 +#endif + +#ifndef GL_EXT_blend_color +#define GL_EXT_blend_color 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBlendColorEXT (GLclampf red, GLclampf green, GLclampf blue, GLclampf alpha); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBLENDCOLOREXTPROC) (GLclampf red, GLclampf green, GLclampf blue, GLclampf alpha); +#endif + +#ifndef GL_EXT_polygon_offset +#define GL_EXT_polygon_offset 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPolygonOffsetEXT (GLfloat factor, GLfloat bias); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPOLYGONOFFSETEXTPROC) (GLfloat factor, GLfloat bias); +#endif + +#ifndef GL_EXT_texture +#define GL_EXT_texture 1 +#endif + +#ifndef GL_EXT_texture3D +#define GL_EXT_texture3D 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTexImage3DEXT (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glTexSubImage3DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXIMAGE3DEXTPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLTEXSUBIMAGE3DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels); +#endif + +#ifndef GL_SGIS_texture_filter4 +#define GL_SGIS_texture_filter4 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGetTexFilterFuncSGIS (GLenum target, GLenum filter, GLfloat *weights); +GLAPI void APIENTRY glTexFilterFuncSGIS (GLenum target, GLenum filter, GLsizei n, const GLfloat *weights); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGETTEXFILTERFUNCSGISPROC) (GLenum target, GLenum filter, GLfloat *weights); +typedef void (APIENTRYP PFNGLTEXFILTERFUNCSGISPROC) (GLenum target, GLenum filter, GLsizei n, const GLfloat *weights); +#endif + +#ifndef GL_EXT_subtexture +#define GL_EXT_subtexture 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTexSubImage1DEXT (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glTexSubImage2DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXSUBIMAGE1DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLTEXSUBIMAGE2DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels); +#endif + +#ifndef GL_EXT_copy_texture +#define GL_EXT_copy_texture 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glCopyTexImage1DEXT (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border); +GLAPI void APIENTRY glCopyTexImage2DEXT (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border); +GLAPI void APIENTRY glCopyTexSubImage1DEXT (GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width); +GLAPI void APIENTRY glCopyTexSubImage2DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height); +GLAPI void APIENTRY glCopyTexSubImage3DEXT (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOPYTEXIMAGE1DEXTPROC) (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border); +typedef void (APIENTRYP PFNGLCOPYTEXIMAGE2DEXTPROC) (GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border); +typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE1DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width); +typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE2DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLCOPYTEXSUBIMAGE3DEXTPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height); +#endif + +#ifndef GL_EXT_histogram +#define GL_EXT_histogram 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGetHistogramEXT (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values); +GLAPI void APIENTRY glGetHistogramParameterfvEXT (GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetHistogramParameterivEXT (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetMinmaxEXT (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values); +GLAPI void APIENTRY glGetMinmaxParameterfvEXT (GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetMinmaxParameterivEXT (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glHistogramEXT (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink); +GLAPI void APIENTRY glMinmaxEXT (GLenum target, GLenum internalformat, GLboolean sink); +GLAPI void APIENTRY glResetHistogramEXT (GLenum target); +GLAPI void APIENTRY glResetMinmaxEXT (GLenum target); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGETHISTOGRAMEXTPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values); +typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETHISTOGRAMPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETMINMAXEXTPROC) (GLenum target, GLboolean reset, GLenum format, GLenum type, GLvoid *values); +typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETMINMAXPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLHISTOGRAMEXTPROC) (GLenum target, GLsizei width, GLenum internalformat, GLboolean sink); +typedef void (APIENTRYP PFNGLMINMAXEXTPROC) (GLenum target, GLenum internalformat, GLboolean sink); +typedef void (APIENTRYP PFNGLRESETHISTOGRAMEXTPROC) (GLenum target); +typedef void (APIENTRYP PFNGLRESETMINMAXEXTPROC) (GLenum target); +#endif + +#ifndef GL_EXT_convolution +#define GL_EXT_convolution 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glConvolutionFilter1DEXT (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *image); +GLAPI void APIENTRY glConvolutionFilter2DEXT (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *image); +GLAPI void APIENTRY glConvolutionParameterfEXT (GLenum target, GLenum pname, GLfloat params); +GLAPI void APIENTRY glConvolutionParameterfvEXT (GLenum target, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glConvolutionParameteriEXT (GLenum target, GLenum pname, GLint params); +GLAPI void APIENTRY glConvolutionParameterivEXT (GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glCopyConvolutionFilter1DEXT (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width); +GLAPI void APIENTRY glCopyConvolutionFilter2DEXT (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height); +GLAPI void APIENTRY glGetConvolutionFilterEXT (GLenum target, GLenum format, GLenum type, GLvoid *image); +GLAPI void APIENTRY glGetConvolutionParameterfvEXT (GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetConvolutionParameterivEXT (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetSeparableFilterEXT (GLenum target, GLenum format, GLenum type, GLvoid *row, GLvoid *column, GLvoid *span); +GLAPI void APIENTRY glSeparableFilter2DEXT (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *row, const GLvoid *column); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER1DEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *image); +typedef void (APIENTRYP PFNGLCONVOLUTIONFILTER2DEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *image); +typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFEXTPROC) (GLenum target, GLenum pname, GLfloat params); +typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERFVEXTPROC) (GLenum target, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIEXTPROC) (GLenum target, GLenum pname, GLint params); +typedef void (APIENTRYP PFNGLCONVOLUTIONPARAMETERIVEXTPROC) (GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER1DEXTPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width); +typedef void (APIENTRYP PFNGLCOPYCONVOLUTIONFILTER2DEXTPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLGETCONVOLUTIONFILTEREXTPROC) (GLenum target, GLenum format, GLenum type, GLvoid *image); +typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETCONVOLUTIONPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETSEPARABLEFILTEREXTPROC) (GLenum target, GLenum format, GLenum type, GLvoid *row, GLvoid *column, GLvoid *span); +typedef void (APIENTRYP PFNGLSEPARABLEFILTER2DEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *row, const GLvoid *column); +#endif + +#ifndef GL_SGI_color_matrix +#define GL_SGI_color_matrix 1 +#endif + +#ifndef GL_SGI_color_table +#define GL_SGI_color_table 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glColorTableSGI (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *table); +GLAPI void APIENTRY glColorTableParameterfvSGI (GLenum target, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glColorTableParameterivSGI (GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glCopyColorTableSGI (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width); +GLAPI void APIENTRY glGetColorTableSGI (GLenum target, GLenum format, GLenum type, GLvoid *table); +GLAPI void APIENTRY glGetColorTableParameterfvSGI (GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetColorTableParameterivSGI (GLenum target, GLenum pname, GLint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOLORTABLESGIPROC) (GLenum target, GLenum internalformat, GLsizei width, GLenum format, GLenum type, const GLvoid *table); +typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERFVSGIPROC) (GLenum target, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLCOLORTABLEPARAMETERIVSGIPROC) (GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLCOPYCOLORTABLESGIPROC) (GLenum target, GLenum internalformat, GLint x, GLint y, GLsizei width); +typedef void (APIENTRYP PFNGLGETCOLORTABLESGIPROC) (GLenum target, GLenum format, GLenum type, GLvoid *table); +typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERFVSGIPROC) (GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERIVSGIPROC) (GLenum target, GLenum pname, GLint *params); +#endif + +#ifndef GL_SGIX_pixel_texture +#define GL_SGIX_pixel_texture 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPixelTexGenSGIX (GLenum mode); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPIXELTEXGENSGIXPROC) (GLenum mode); +#endif + +#ifndef GL_SGIS_pixel_texture +#define GL_SGIS_pixel_texture 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPixelTexGenParameteriSGIS (GLenum pname, GLint param); +GLAPI void APIENTRY glPixelTexGenParameterivSGIS (GLenum pname, const GLint *params); +GLAPI void APIENTRY glPixelTexGenParameterfSGIS (GLenum pname, GLfloat param); +GLAPI void APIENTRY glPixelTexGenParameterfvSGIS (GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glGetPixelTexGenParameterivSGIS (GLenum pname, GLint *params); +GLAPI void APIENTRY glGetPixelTexGenParameterfvSGIS (GLenum pname, GLfloat *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERISGISPROC) (GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERIVSGISPROC) (GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERFSGISPROC) (GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLPIXELTEXGENPARAMETERFVSGISPROC) (GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLGETPIXELTEXGENPARAMETERIVSGISPROC) (GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETPIXELTEXGENPARAMETERFVSGISPROC) (GLenum pname, GLfloat *params); +#endif + +#ifndef GL_SGIS_texture4D +#define GL_SGIS_texture4D 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTexImage4DSGIS (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glTexSubImage4DSGIS (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint woffset, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLenum format, GLenum type, const GLvoid *pixels); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXIMAGE4DSGISPROC) (GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLTEXSUBIMAGE4DSGISPROC) (GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint woffset, GLsizei width, GLsizei height, GLsizei depth, GLsizei size4d, GLenum format, GLenum type, const GLvoid *pixels); +#endif + +#ifndef GL_SGI_texture_color_table +#define GL_SGI_texture_color_table 1 +#endif + +#ifndef GL_EXT_cmyka +#define GL_EXT_cmyka 1 +#endif + +#ifndef GL_EXT_texture_object +#define GL_EXT_texture_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLboolean APIENTRY glAreTexturesResidentEXT (GLsizei n, const GLuint *textures, GLboolean *residences); +GLAPI void APIENTRY glBindTextureEXT (GLenum target, GLuint texture); +GLAPI void APIENTRY glDeleteTexturesEXT (GLsizei n, const GLuint *textures); +GLAPI void APIENTRY glGenTexturesEXT (GLsizei n, GLuint *textures); +GLAPI GLboolean APIENTRY glIsTextureEXT (GLuint texture); +GLAPI void APIENTRY glPrioritizeTexturesEXT (GLsizei n, const GLuint *textures, const GLclampf *priorities); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLboolean (APIENTRYP PFNGLARETEXTURESRESIDENTEXTPROC) (GLsizei n, const GLuint *textures, GLboolean *residences); +typedef void (APIENTRYP PFNGLBINDTEXTUREEXTPROC) (GLenum target, GLuint texture); +typedef void (APIENTRYP PFNGLDELETETEXTURESEXTPROC) (GLsizei n, const GLuint *textures); +typedef void (APIENTRYP PFNGLGENTEXTURESEXTPROC) (GLsizei n, GLuint *textures); +typedef GLboolean (APIENTRYP PFNGLISTEXTUREEXTPROC) (GLuint texture); +typedef void (APIENTRYP PFNGLPRIORITIZETEXTURESEXTPROC) (GLsizei n, const GLuint *textures, const GLclampf *priorities); +#endif + +#ifndef GL_SGIS_detail_texture +#define GL_SGIS_detail_texture 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDetailTexFuncSGIS (GLenum target, GLsizei n, const GLfloat *points); +GLAPI void APIENTRY glGetDetailTexFuncSGIS (GLenum target, GLfloat *points); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDETAILTEXFUNCSGISPROC) (GLenum target, GLsizei n, const GLfloat *points); +typedef void (APIENTRYP PFNGLGETDETAILTEXFUNCSGISPROC) (GLenum target, GLfloat *points); +#endif + +#ifndef GL_SGIS_sharpen_texture +#define GL_SGIS_sharpen_texture 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glSharpenTexFuncSGIS (GLenum target, GLsizei n, const GLfloat *points); +GLAPI void APIENTRY glGetSharpenTexFuncSGIS (GLenum target, GLfloat *points); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLSHARPENTEXFUNCSGISPROC) (GLenum target, GLsizei n, const GLfloat *points); +typedef void (APIENTRYP PFNGLGETSHARPENTEXFUNCSGISPROC) (GLenum target, GLfloat *points); +#endif + +#ifndef GL_EXT_packed_pixels +#define GL_EXT_packed_pixels 1 +#endif + +#ifndef GL_SGIS_texture_lod +#define GL_SGIS_texture_lod 1 +#endif + +#ifndef GL_SGIS_multisample +#define GL_SGIS_multisample 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glSampleMaskSGIS (GLclampf value, GLboolean invert); +GLAPI void APIENTRY glSamplePatternSGIS (GLenum pattern); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLSAMPLEMASKSGISPROC) (GLclampf value, GLboolean invert); +typedef void (APIENTRYP PFNGLSAMPLEPATTERNSGISPROC) (GLenum pattern); +#endif + +#ifndef GL_EXT_rescale_normal +#define GL_EXT_rescale_normal 1 +#endif + +#ifndef GL_EXT_vertex_array +#define GL_EXT_vertex_array 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glArrayElementEXT (GLint i); +GLAPI void APIENTRY glColorPointerEXT (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer); +GLAPI void APIENTRY glDrawArraysEXT (GLenum mode, GLint first, GLsizei count); +GLAPI void APIENTRY glEdgeFlagPointerEXT (GLsizei stride, GLsizei count, const GLboolean *pointer); +GLAPI void APIENTRY glGetPointervEXT (GLenum pname, GLvoid* *params); +GLAPI void APIENTRY glIndexPointerEXT (GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer); +GLAPI void APIENTRY glNormalPointerEXT (GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer); +GLAPI void APIENTRY glTexCoordPointerEXT (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer); +GLAPI void APIENTRY glVertexPointerEXT (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLARRAYELEMENTEXTPROC) (GLint i); +typedef void (APIENTRYP PFNGLCOLORPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLDRAWARRAYSEXTPROC) (GLenum mode, GLint first, GLsizei count); +typedef void (APIENTRYP PFNGLEDGEFLAGPOINTEREXTPROC) (GLsizei stride, GLsizei count, const GLboolean *pointer); +typedef void (APIENTRYP PFNGLGETPOINTERVEXTPROC) (GLenum pname, GLvoid* *params); +typedef void (APIENTRYP PFNGLINDEXPOINTEREXTPROC) (GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLNORMALPOINTEREXTPROC) (GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLTEXCOORDPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLVERTEXPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, GLsizei count, const GLvoid *pointer); +#endif + +#ifndef GL_EXT_misc_attribute +#define GL_EXT_misc_attribute 1 +#endif + +#ifndef GL_SGIS_generate_mipmap +#define GL_SGIS_generate_mipmap 1 +#endif + +#ifndef GL_SGIX_clipmap +#define GL_SGIX_clipmap 1 +#endif + +#ifndef GL_SGIX_shadow +#define GL_SGIX_shadow 1 +#endif + +#ifndef GL_SGIS_texture_edge_clamp +#define GL_SGIS_texture_edge_clamp 1 +#endif + +#ifndef GL_SGIS_texture_border_clamp +#define GL_SGIS_texture_border_clamp 1 +#endif + +#ifndef GL_EXT_blend_minmax +#define GL_EXT_blend_minmax 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBlendEquationEXT (GLenum mode); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBLENDEQUATIONEXTPROC) (GLenum mode); +#endif + +#ifndef GL_EXT_blend_subtract +#define GL_EXT_blend_subtract 1 +#endif + +#ifndef GL_EXT_blend_logic_op +#define GL_EXT_blend_logic_op 1 +#endif + +#ifndef GL_SGIX_interlace +#define GL_SGIX_interlace 1 +#endif + +#ifndef GL_SGIX_pixel_tiles +#define GL_SGIX_pixel_tiles 1 +#endif + +#ifndef GL_SGIX_texture_select +#define GL_SGIX_texture_select 1 +#endif + +#ifndef GL_SGIX_sprite +#define GL_SGIX_sprite 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glSpriteParameterfSGIX (GLenum pname, GLfloat param); +GLAPI void APIENTRY glSpriteParameterfvSGIX (GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glSpriteParameteriSGIX (GLenum pname, GLint param); +GLAPI void APIENTRY glSpriteParameterivSGIX (GLenum pname, const GLint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLSPRITEPARAMETERFSGIXPROC) (GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLSPRITEPARAMETERFVSGIXPROC) (GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLSPRITEPARAMETERISGIXPROC) (GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLSPRITEPARAMETERIVSGIXPROC) (GLenum pname, const GLint *params); +#endif + +#ifndef GL_SGIX_texture_multi_buffer +#define GL_SGIX_texture_multi_buffer 1 +#endif + +#ifndef GL_EXT_point_parameters +#define GL_EXT_point_parameters 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPointParameterfEXT (GLenum pname, GLfloat param); +GLAPI void APIENTRY glPointParameterfvEXT (GLenum pname, const GLfloat *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPOINTPARAMETERFEXTPROC) (GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLPOINTPARAMETERFVEXTPROC) (GLenum pname, const GLfloat *params); +#endif + +#ifndef GL_SGIS_point_parameters +#define GL_SGIS_point_parameters 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPointParameterfSGIS (GLenum pname, GLfloat param); +GLAPI void APIENTRY glPointParameterfvSGIS (GLenum pname, const GLfloat *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPOINTPARAMETERFSGISPROC) (GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLPOINTPARAMETERFVSGISPROC) (GLenum pname, const GLfloat *params); +#endif + +#ifndef GL_SGIX_instruments +#define GL_SGIX_instruments 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLint APIENTRY glGetInstrumentsSGIX (void); +GLAPI void APIENTRY glInstrumentsBufferSGIX (GLsizei size, GLint *buffer); +GLAPI GLint APIENTRY glPollInstrumentsSGIX (GLint *marker_p); +GLAPI void APIENTRY glReadInstrumentsSGIX (GLint marker); +GLAPI void APIENTRY glStartInstrumentsSGIX (void); +GLAPI void APIENTRY glStopInstrumentsSGIX (GLint marker); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLint (APIENTRYP PFNGLGETINSTRUMENTSSGIXPROC) (void); +typedef void (APIENTRYP PFNGLINSTRUMENTSBUFFERSGIXPROC) (GLsizei size, GLint *buffer); +typedef GLint (APIENTRYP PFNGLPOLLINSTRUMENTSSGIXPROC) (GLint *marker_p); +typedef void (APIENTRYP PFNGLREADINSTRUMENTSSGIXPROC) (GLint marker); +typedef void (APIENTRYP PFNGLSTARTINSTRUMENTSSGIXPROC) (void); +typedef void (APIENTRYP PFNGLSTOPINSTRUMENTSSGIXPROC) (GLint marker); +#endif + +#ifndef GL_SGIX_texture_scale_bias +#define GL_SGIX_texture_scale_bias 1 +#endif + +#ifndef GL_SGIX_framezoom +#define GL_SGIX_framezoom 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glFrameZoomSGIX (GLint factor); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLFRAMEZOOMSGIXPROC) (GLint factor); +#endif + +#ifndef GL_SGIX_tag_sample_buffer +#define GL_SGIX_tag_sample_buffer 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTagSampleBufferSGIX (void); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTAGSAMPLEBUFFERSGIXPROC) (void); +#endif + +#ifndef GL_SGIX_polynomial_ffd +#define GL_SGIX_polynomial_ffd 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDeformationMap3dSGIX (GLenum target, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, GLdouble w1, GLdouble w2, GLint wstride, GLint worder, const GLdouble *points); +GLAPI void APIENTRY glDeformationMap3fSGIX (GLenum target, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, GLfloat w1, GLfloat w2, GLint wstride, GLint worder, const GLfloat *points); +GLAPI void APIENTRY glDeformSGIX (GLbitfield mask); +GLAPI void APIENTRY glLoadIdentityDeformationMapSGIX (GLbitfield mask); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDEFORMATIONMAP3DSGIXPROC) (GLenum target, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, GLdouble w1, GLdouble w2, GLint wstride, GLint worder, const GLdouble *points); +typedef void (APIENTRYP PFNGLDEFORMATIONMAP3FSGIXPROC) (GLenum target, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, GLfloat w1, GLfloat w2, GLint wstride, GLint worder, const GLfloat *points); +typedef void (APIENTRYP PFNGLDEFORMSGIXPROC) (GLbitfield mask); +typedef void (APIENTRYP PFNGLLOADIDENTITYDEFORMATIONMAPSGIXPROC) (GLbitfield mask); +#endif + +#ifndef GL_SGIX_reference_plane +#define GL_SGIX_reference_plane 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glReferencePlaneSGIX (const GLdouble *equation); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLREFERENCEPLANESGIXPROC) (const GLdouble *equation); +#endif + +#ifndef GL_SGIX_flush_raster +#define GL_SGIX_flush_raster 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glFlushRasterSGIX (void); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLFLUSHRASTERSGIXPROC) (void); +#endif + +#ifndef GL_SGIX_depth_texture +#define GL_SGIX_depth_texture 1 +#endif + +#ifndef GL_SGIS_fog_function +#define GL_SGIS_fog_function 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glFogFuncSGIS (GLsizei n, const GLfloat *points); +GLAPI void APIENTRY glGetFogFuncSGIS (GLfloat *points); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLFOGFUNCSGISPROC) (GLsizei n, const GLfloat *points); +typedef void (APIENTRYP PFNGLGETFOGFUNCSGISPROC) (GLfloat *points); +#endif + +#ifndef GL_SGIX_fog_offset +#define GL_SGIX_fog_offset 1 +#endif + +#ifndef GL_HP_image_transform +#define GL_HP_image_transform 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glImageTransformParameteriHP (GLenum target, GLenum pname, GLint param); +GLAPI void APIENTRY glImageTransformParameterfHP (GLenum target, GLenum pname, GLfloat param); +GLAPI void APIENTRY glImageTransformParameterivHP (GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glImageTransformParameterfvHP (GLenum target, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glGetImageTransformParameterivHP (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetImageTransformParameterfvHP (GLenum target, GLenum pname, GLfloat *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERIHPPROC) (GLenum target, GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERFHPPROC) (GLenum target, GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERIVHPPROC) (GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLIMAGETRANSFORMPARAMETERFVHPPROC) (GLenum target, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLGETIMAGETRANSFORMPARAMETERIVHPPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETIMAGETRANSFORMPARAMETERFVHPPROC) (GLenum target, GLenum pname, GLfloat *params); +#endif + +#ifndef GL_HP_convolution_border_modes +#define GL_HP_convolution_border_modes 1 +#endif + +#ifndef GL_SGIX_texture_add_env +#define GL_SGIX_texture_add_env 1 +#endif + +#ifndef GL_EXT_color_subtable +#define GL_EXT_color_subtable 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glColorSubTableEXT (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const GLvoid *data); +GLAPI void APIENTRY glCopyColorSubTableEXT (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOLORSUBTABLEEXTPROC) (GLenum target, GLsizei start, GLsizei count, GLenum format, GLenum type, const GLvoid *data); +typedef void (APIENTRYP PFNGLCOPYCOLORSUBTABLEEXTPROC) (GLenum target, GLsizei start, GLint x, GLint y, GLsizei width); +#endif + +#ifndef GL_PGI_vertex_hints +#define GL_PGI_vertex_hints 1 +#endif + +#ifndef GL_PGI_misc_hints +#define GL_PGI_misc_hints 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glHintPGI (GLenum target, GLint mode); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLHINTPGIPROC) (GLenum target, GLint mode); +#endif + +#ifndef GL_EXT_paletted_texture +#define GL_EXT_paletted_texture 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glColorTableEXT (GLenum target, GLenum internalFormat, GLsizei width, GLenum format, GLenum type, const GLvoid *table); +GLAPI void APIENTRY glGetColorTableEXT (GLenum target, GLenum format, GLenum type, GLvoid *data); +GLAPI void APIENTRY glGetColorTableParameterivEXT (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetColorTableParameterfvEXT (GLenum target, GLenum pname, GLfloat *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOLORTABLEEXTPROC) (GLenum target, GLenum internalFormat, GLsizei width, GLenum format, GLenum type, const GLvoid *table); +typedef void (APIENTRYP PFNGLGETCOLORTABLEEXTPROC) (GLenum target, GLenum format, GLenum type, GLvoid *data); +typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETCOLORTABLEPARAMETERFVEXTPROC) (GLenum target, GLenum pname, GLfloat *params); +#endif + +#ifndef GL_EXT_clip_volume_hint +#define GL_EXT_clip_volume_hint 1 +#endif + +#ifndef GL_SGIX_list_priority +#define GL_SGIX_list_priority 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGetListParameterfvSGIX (GLuint list, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetListParameterivSGIX (GLuint list, GLenum pname, GLint *params); +GLAPI void APIENTRY glListParameterfSGIX (GLuint list, GLenum pname, GLfloat param); +GLAPI void APIENTRY glListParameterfvSGIX (GLuint list, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glListParameteriSGIX (GLuint list, GLenum pname, GLint param); +GLAPI void APIENTRY glListParameterivSGIX (GLuint list, GLenum pname, const GLint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGETLISTPARAMETERFVSGIXPROC) (GLuint list, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETLISTPARAMETERIVSGIXPROC) (GLuint list, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLLISTPARAMETERFSGIXPROC) (GLuint list, GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLLISTPARAMETERFVSGIXPROC) (GLuint list, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLLISTPARAMETERISGIXPROC) (GLuint list, GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLLISTPARAMETERIVSGIXPROC) (GLuint list, GLenum pname, const GLint *params); +#endif + +#ifndef GL_SGIX_ir_instrument1 +#define GL_SGIX_ir_instrument1 1 +#endif + +#ifndef GL_SGIX_calligraphic_fragment +#define GL_SGIX_calligraphic_fragment 1 +#endif + +#ifndef GL_SGIX_texture_lod_bias +#define GL_SGIX_texture_lod_bias 1 +#endif + +#ifndef GL_SGIX_shadow_ambient +#define GL_SGIX_shadow_ambient 1 +#endif + +#ifndef GL_EXT_index_texture +#define GL_EXT_index_texture 1 +#endif + +#ifndef GL_EXT_index_material +#define GL_EXT_index_material 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glIndexMaterialEXT (GLenum face, GLenum mode); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLINDEXMATERIALEXTPROC) (GLenum face, GLenum mode); +#endif + +#ifndef GL_EXT_index_func +#define GL_EXT_index_func 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glIndexFuncEXT (GLenum func, GLclampf ref); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLINDEXFUNCEXTPROC) (GLenum func, GLclampf ref); +#endif + +#ifndef GL_EXT_index_array_formats +#define GL_EXT_index_array_formats 1 +#endif + +#ifndef GL_EXT_compiled_vertex_array +#define GL_EXT_compiled_vertex_array 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glLockArraysEXT (GLint first, GLsizei count); +GLAPI void APIENTRY glUnlockArraysEXT (void); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLLOCKARRAYSEXTPROC) (GLint first, GLsizei count); +typedef void (APIENTRYP PFNGLUNLOCKARRAYSEXTPROC) (void); +#endif + +#ifndef GL_EXT_cull_vertex +#define GL_EXT_cull_vertex 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glCullParameterdvEXT (GLenum pname, GLdouble *params); +GLAPI void APIENTRY glCullParameterfvEXT (GLenum pname, GLfloat *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCULLPARAMETERDVEXTPROC) (GLenum pname, GLdouble *params); +typedef void (APIENTRYP PFNGLCULLPARAMETERFVEXTPROC) (GLenum pname, GLfloat *params); +#endif + +#ifndef GL_SGIX_ycrcb +#define GL_SGIX_ycrcb 1 +#endif + +#ifndef GL_SGIX_fragment_lighting +#define GL_SGIX_fragment_lighting 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glFragmentColorMaterialSGIX (GLenum face, GLenum mode); +GLAPI void APIENTRY glFragmentLightfSGIX (GLenum light, GLenum pname, GLfloat param); +GLAPI void APIENTRY glFragmentLightfvSGIX (GLenum light, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glFragmentLightiSGIX (GLenum light, GLenum pname, GLint param); +GLAPI void APIENTRY glFragmentLightivSGIX (GLenum light, GLenum pname, const GLint *params); +GLAPI void APIENTRY glFragmentLightModelfSGIX (GLenum pname, GLfloat param); +GLAPI void APIENTRY glFragmentLightModelfvSGIX (GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glFragmentLightModeliSGIX (GLenum pname, GLint param); +GLAPI void APIENTRY glFragmentLightModelivSGIX (GLenum pname, const GLint *params); +GLAPI void APIENTRY glFragmentMaterialfSGIX (GLenum face, GLenum pname, GLfloat param); +GLAPI void APIENTRY glFragmentMaterialfvSGIX (GLenum face, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glFragmentMaterialiSGIX (GLenum face, GLenum pname, GLint param); +GLAPI void APIENTRY glFragmentMaterialivSGIX (GLenum face, GLenum pname, const GLint *params); +GLAPI void APIENTRY glGetFragmentLightfvSGIX (GLenum light, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetFragmentLightivSGIX (GLenum light, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetFragmentMaterialfvSGIX (GLenum face, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetFragmentMaterialivSGIX (GLenum face, GLenum pname, GLint *params); +GLAPI void APIENTRY glLightEnviSGIX (GLenum pname, GLint param); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLFRAGMENTCOLORMATERIALSGIXPROC) (GLenum face, GLenum mode); +typedef void (APIENTRYP PFNGLFRAGMENTLIGHTFSGIXPROC) (GLenum light, GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLFRAGMENTLIGHTFVSGIXPROC) (GLenum light, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLFRAGMENTLIGHTISGIXPROC) (GLenum light, GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLFRAGMENTLIGHTIVSGIXPROC) (GLenum light, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELFSGIXPROC) (GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELFVSGIXPROC) (GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELISGIXPROC) (GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLFRAGMENTLIGHTMODELIVSGIXPROC) (GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLFRAGMENTMATERIALFSGIXPROC) (GLenum face, GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLFRAGMENTMATERIALFVSGIXPROC) (GLenum face, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLFRAGMENTMATERIALISGIXPROC) (GLenum face, GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLFRAGMENTMATERIALIVSGIXPROC) (GLenum face, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLGETFRAGMENTLIGHTFVSGIXPROC) (GLenum light, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETFRAGMENTLIGHTIVSGIXPROC) (GLenum light, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETFRAGMENTMATERIALFVSGIXPROC) (GLenum face, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETFRAGMENTMATERIALIVSGIXPROC) (GLenum face, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLLIGHTENVISGIXPROC) (GLenum pname, GLint param); +#endif + +#ifndef GL_IBM_rasterpos_clip +#define GL_IBM_rasterpos_clip 1 +#endif + +#ifndef GL_HP_texture_lighting +#define GL_HP_texture_lighting 1 +#endif + +#ifndef GL_EXT_draw_range_elements +#define GL_EXT_draw_range_elements 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDrawRangeElementsEXT (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTSEXTPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count, GLenum type, const GLvoid *indices); +#endif + +#ifndef GL_WIN_phong_shading +#define GL_WIN_phong_shading 1 +#endif + +#ifndef GL_WIN_specular_fog +#define GL_WIN_specular_fog 1 +#endif + +#ifndef GL_EXT_light_texture +#define GL_EXT_light_texture 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glApplyTextureEXT (GLenum mode); +GLAPI void APIENTRY glTextureLightEXT (GLenum pname); +GLAPI void APIENTRY glTextureMaterialEXT (GLenum face, GLenum mode); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLAPPLYTEXTUREEXTPROC) (GLenum mode); +typedef void (APIENTRYP PFNGLTEXTURELIGHTEXTPROC) (GLenum pname); +typedef void (APIENTRYP PFNGLTEXTUREMATERIALEXTPROC) (GLenum face, GLenum mode); +#endif + +#ifndef GL_SGIX_blend_alpha_minmax +#define GL_SGIX_blend_alpha_minmax 1 +#endif + +#ifndef GL_EXT_bgra +#define GL_EXT_bgra 1 +#endif + +#ifndef GL_SGIX_async +#define GL_SGIX_async 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glAsyncMarkerSGIX (GLuint marker); +GLAPI GLint APIENTRY glFinishAsyncSGIX (GLuint *markerp); +GLAPI GLint APIENTRY glPollAsyncSGIX (GLuint *markerp); +GLAPI GLuint APIENTRY glGenAsyncMarkersSGIX (GLsizei range); +GLAPI void APIENTRY glDeleteAsyncMarkersSGIX (GLuint marker, GLsizei range); +GLAPI GLboolean APIENTRY glIsAsyncMarkerSGIX (GLuint marker); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLASYNCMARKERSGIXPROC) (GLuint marker); +typedef GLint (APIENTRYP PFNGLFINISHASYNCSGIXPROC) (GLuint *markerp); +typedef GLint (APIENTRYP PFNGLPOLLASYNCSGIXPROC) (GLuint *markerp); +typedef GLuint (APIENTRYP PFNGLGENASYNCMARKERSSGIXPROC) (GLsizei range); +typedef void (APIENTRYP PFNGLDELETEASYNCMARKERSSGIXPROC) (GLuint marker, GLsizei range); +typedef GLboolean (APIENTRYP PFNGLISASYNCMARKERSGIXPROC) (GLuint marker); +#endif + +#ifndef GL_SGIX_async_pixel +#define GL_SGIX_async_pixel 1 +#endif + +#ifndef GL_SGIX_async_histogram +#define GL_SGIX_async_histogram 1 +#endif + +#ifndef GL_INTEL_parallel_arrays +#define GL_INTEL_parallel_arrays 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexPointervINTEL (GLint size, GLenum type, const GLvoid* *pointer); +GLAPI void APIENTRY glNormalPointervINTEL (GLenum type, const GLvoid* *pointer); +GLAPI void APIENTRY glColorPointervINTEL (GLint size, GLenum type, const GLvoid* *pointer); +GLAPI void APIENTRY glTexCoordPointervINTEL (GLint size, GLenum type, const GLvoid* *pointer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXPOINTERVINTELPROC) (GLint size, GLenum type, const GLvoid* *pointer); +typedef void (APIENTRYP PFNGLNORMALPOINTERVINTELPROC) (GLenum type, const GLvoid* *pointer); +typedef void (APIENTRYP PFNGLCOLORPOINTERVINTELPROC) (GLint size, GLenum type, const GLvoid* *pointer); +typedef void (APIENTRYP PFNGLTEXCOORDPOINTERVINTELPROC) (GLint size, GLenum type, const GLvoid* *pointer); +#endif + +#ifndef GL_HP_occlusion_test +#define GL_HP_occlusion_test 1 +#endif + +#ifndef GL_EXT_pixel_transform +#define GL_EXT_pixel_transform 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPixelTransformParameteriEXT (GLenum target, GLenum pname, GLint param); +GLAPI void APIENTRY glPixelTransformParameterfEXT (GLenum target, GLenum pname, GLfloat param); +GLAPI void APIENTRY glPixelTransformParameterivEXT (GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glPixelTransformParameterfvEXT (GLenum target, GLenum pname, const GLfloat *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERIEXTPROC) (GLenum target, GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERFEXTPROC) (GLenum target, GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERIVEXTPROC) (GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLPIXELTRANSFORMPARAMETERFVEXTPROC) (GLenum target, GLenum pname, const GLfloat *params); +#endif + +#ifndef GL_EXT_pixel_transform_color_table +#define GL_EXT_pixel_transform_color_table 1 +#endif + +#ifndef GL_EXT_shared_texture_palette +#define GL_EXT_shared_texture_palette 1 +#endif + +#ifndef GL_EXT_separate_specular_color +#define GL_EXT_separate_specular_color 1 +#endif + +#ifndef GL_EXT_secondary_color +#define GL_EXT_secondary_color 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glSecondaryColor3bEXT (GLbyte red, GLbyte green, GLbyte blue); +GLAPI void APIENTRY glSecondaryColor3bvEXT (const GLbyte *v); +GLAPI void APIENTRY glSecondaryColor3dEXT (GLdouble red, GLdouble green, GLdouble blue); +GLAPI void APIENTRY glSecondaryColor3dvEXT (const GLdouble *v); +GLAPI void APIENTRY glSecondaryColor3fEXT (GLfloat red, GLfloat green, GLfloat blue); +GLAPI void APIENTRY glSecondaryColor3fvEXT (const GLfloat *v); +GLAPI void APIENTRY glSecondaryColor3iEXT (GLint red, GLint green, GLint blue); +GLAPI void APIENTRY glSecondaryColor3ivEXT (const GLint *v); +GLAPI void APIENTRY glSecondaryColor3sEXT (GLshort red, GLshort green, GLshort blue); +GLAPI void APIENTRY glSecondaryColor3svEXT (const GLshort *v); +GLAPI void APIENTRY glSecondaryColor3ubEXT (GLubyte red, GLubyte green, GLubyte blue); +GLAPI void APIENTRY glSecondaryColor3ubvEXT (const GLubyte *v); +GLAPI void APIENTRY glSecondaryColor3uiEXT (GLuint red, GLuint green, GLuint blue); +GLAPI void APIENTRY glSecondaryColor3uivEXT (const GLuint *v); +GLAPI void APIENTRY glSecondaryColor3usEXT (GLushort red, GLushort green, GLushort blue); +GLAPI void APIENTRY glSecondaryColor3usvEXT (const GLushort *v); +GLAPI void APIENTRY glSecondaryColorPointerEXT (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BEXTPROC) (GLbyte red, GLbyte green, GLbyte blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3BVEXTPROC) (const GLbyte *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DEXTPROC) (GLdouble red, GLdouble green, GLdouble blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3DVEXTPROC) (const GLdouble *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FEXTPROC) (GLfloat red, GLfloat green, GLfloat blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3FVEXTPROC) (const GLfloat *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IEXTPROC) (GLint red, GLint green, GLint blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3IVEXTPROC) (const GLint *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SEXTPROC) (GLshort red, GLshort green, GLshort blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3SVEXTPROC) (const GLshort *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBEXTPROC) (GLubyte red, GLubyte green, GLubyte blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UBVEXTPROC) (const GLubyte *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIEXTPROC) (GLuint red, GLuint green, GLuint blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3UIVEXTPROC) (const GLuint *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USEXTPROC) (GLushort red, GLushort green, GLushort blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3USVEXTPROC) (const GLushort *v); +typedef void (APIENTRYP PFNGLSECONDARYCOLORPOINTEREXTPROC) (GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +#endif + +#ifndef GL_EXT_texture_perturb_normal +#define GL_EXT_texture_perturb_normal 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTextureNormalEXT (GLenum mode); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXTURENORMALEXTPROC) (GLenum mode); +#endif + +#ifndef GL_EXT_multi_draw_arrays +#define GL_EXT_multi_draw_arrays 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glMultiDrawArraysEXT (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount); +GLAPI void APIENTRY glMultiDrawElementsEXT (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* *indices, GLsizei primcount); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLMULTIDRAWARRAYSEXTPROC) (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount); +typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTSEXTPROC) (GLenum mode, const GLsizei *count, GLenum type, const GLvoid* *indices, GLsizei primcount); +#endif + +#ifndef GL_EXT_fog_coord +#define GL_EXT_fog_coord 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glFogCoordfEXT (GLfloat coord); +GLAPI void APIENTRY glFogCoordfvEXT (const GLfloat *coord); +GLAPI void APIENTRY glFogCoorddEXT (GLdouble coord); +GLAPI void APIENTRY glFogCoorddvEXT (const GLdouble *coord); +GLAPI void APIENTRY glFogCoordPointerEXT (GLenum type, GLsizei stride, const GLvoid *pointer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLFOGCOORDFEXTPROC) (GLfloat coord); +typedef void (APIENTRYP PFNGLFOGCOORDFVEXTPROC) (const GLfloat *coord); +typedef void (APIENTRYP PFNGLFOGCOORDDEXTPROC) (GLdouble coord); +typedef void (APIENTRYP PFNGLFOGCOORDDVEXTPROC) (const GLdouble *coord); +typedef void (APIENTRYP PFNGLFOGCOORDPOINTEREXTPROC) (GLenum type, GLsizei stride, const GLvoid *pointer); +#endif + +#ifndef GL_REND_screen_coordinates +#define GL_REND_screen_coordinates 1 +#endif + +#ifndef GL_EXT_coordinate_frame +#define GL_EXT_coordinate_frame 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTangent3bEXT (GLbyte tx, GLbyte ty, GLbyte tz); +GLAPI void APIENTRY glTangent3bvEXT (const GLbyte *v); +GLAPI void APIENTRY glTangent3dEXT (GLdouble tx, GLdouble ty, GLdouble tz); +GLAPI void APIENTRY glTangent3dvEXT (const GLdouble *v); +GLAPI void APIENTRY glTangent3fEXT (GLfloat tx, GLfloat ty, GLfloat tz); +GLAPI void APIENTRY glTangent3fvEXT (const GLfloat *v); +GLAPI void APIENTRY glTangent3iEXT (GLint tx, GLint ty, GLint tz); +GLAPI void APIENTRY glTangent3ivEXT (const GLint *v); +GLAPI void APIENTRY glTangent3sEXT (GLshort tx, GLshort ty, GLshort tz); +GLAPI void APIENTRY glTangent3svEXT (const GLshort *v); +GLAPI void APIENTRY glBinormal3bEXT (GLbyte bx, GLbyte by, GLbyte bz); +GLAPI void APIENTRY glBinormal3bvEXT (const GLbyte *v); +GLAPI void APIENTRY glBinormal3dEXT (GLdouble bx, GLdouble by, GLdouble bz); +GLAPI void APIENTRY glBinormal3dvEXT (const GLdouble *v); +GLAPI void APIENTRY glBinormal3fEXT (GLfloat bx, GLfloat by, GLfloat bz); +GLAPI void APIENTRY glBinormal3fvEXT (const GLfloat *v); +GLAPI void APIENTRY glBinormal3iEXT (GLint bx, GLint by, GLint bz); +GLAPI void APIENTRY glBinormal3ivEXT (const GLint *v); +GLAPI void APIENTRY glBinormal3sEXT (GLshort bx, GLshort by, GLshort bz); +GLAPI void APIENTRY glBinormal3svEXT (const GLshort *v); +GLAPI void APIENTRY glTangentPointerEXT (GLenum type, GLsizei stride, const GLvoid *pointer); +GLAPI void APIENTRY glBinormalPointerEXT (GLenum type, GLsizei stride, const GLvoid *pointer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTANGENT3BEXTPROC) (GLbyte tx, GLbyte ty, GLbyte tz); +typedef void (APIENTRYP PFNGLTANGENT3BVEXTPROC) (const GLbyte *v); +typedef void (APIENTRYP PFNGLTANGENT3DEXTPROC) (GLdouble tx, GLdouble ty, GLdouble tz); +typedef void (APIENTRYP PFNGLTANGENT3DVEXTPROC) (const GLdouble *v); +typedef void (APIENTRYP PFNGLTANGENT3FEXTPROC) (GLfloat tx, GLfloat ty, GLfloat tz); +typedef void (APIENTRYP PFNGLTANGENT3FVEXTPROC) (const GLfloat *v); +typedef void (APIENTRYP PFNGLTANGENT3IEXTPROC) (GLint tx, GLint ty, GLint tz); +typedef void (APIENTRYP PFNGLTANGENT3IVEXTPROC) (const GLint *v); +typedef void (APIENTRYP PFNGLTANGENT3SEXTPROC) (GLshort tx, GLshort ty, GLshort tz); +typedef void (APIENTRYP PFNGLTANGENT3SVEXTPROC) (const GLshort *v); +typedef void (APIENTRYP PFNGLBINORMAL3BEXTPROC) (GLbyte bx, GLbyte by, GLbyte bz); +typedef void (APIENTRYP PFNGLBINORMAL3BVEXTPROC) (const GLbyte *v); +typedef void (APIENTRYP PFNGLBINORMAL3DEXTPROC) (GLdouble bx, GLdouble by, GLdouble bz); +typedef void (APIENTRYP PFNGLBINORMAL3DVEXTPROC) (const GLdouble *v); +typedef void (APIENTRYP PFNGLBINORMAL3FEXTPROC) (GLfloat bx, GLfloat by, GLfloat bz); +typedef void (APIENTRYP PFNGLBINORMAL3FVEXTPROC) (const GLfloat *v); +typedef void (APIENTRYP PFNGLBINORMAL3IEXTPROC) (GLint bx, GLint by, GLint bz); +typedef void (APIENTRYP PFNGLBINORMAL3IVEXTPROC) (const GLint *v); +typedef void (APIENTRYP PFNGLBINORMAL3SEXTPROC) (GLshort bx, GLshort by, GLshort bz); +typedef void (APIENTRYP PFNGLBINORMAL3SVEXTPROC) (const GLshort *v); +typedef void (APIENTRYP PFNGLTANGENTPOINTEREXTPROC) (GLenum type, GLsizei stride, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLBINORMALPOINTEREXTPROC) (GLenum type, GLsizei stride, const GLvoid *pointer); +#endif + +#ifndef GL_EXT_texture_env_combine +#define GL_EXT_texture_env_combine 1 +#endif + +#ifndef GL_APPLE_specular_vector +#define GL_APPLE_specular_vector 1 +#endif + +#ifndef GL_APPLE_transform_hint +#define GL_APPLE_transform_hint 1 +#endif + +#ifndef GL_SGIX_fog_scale +#define GL_SGIX_fog_scale 1 +#endif + +#ifndef GL_SUNX_constant_data +#define GL_SUNX_constant_data 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glFinishTextureSUNX (void); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLFINISHTEXTURESUNXPROC) (void); +#endif + +#ifndef GL_SUN_global_alpha +#define GL_SUN_global_alpha 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGlobalAlphaFactorbSUN (GLbyte factor); +GLAPI void APIENTRY glGlobalAlphaFactorsSUN (GLshort factor); +GLAPI void APIENTRY glGlobalAlphaFactoriSUN (GLint factor); +GLAPI void APIENTRY glGlobalAlphaFactorfSUN (GLfloat factor); +GLAPI void APIENTRY glGlobalAlphaFactordSUN (GLdouble factor); +GLAPI void APIENTRY glGlobalAlphaFactorubSUN (GLubyte factor); +GLAPI void APIENTRY glGlobalAlphaFactorusSUN (GLushort factor); +GLAPI void APIENTRY glGlobalAlphaFactoruiSUN (GLuint factor); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORBSUNPROC) (GLbyte factor); +typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORSSUNPROC) (GLshort factor); +typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORISUNPROC) (GLint factor); +typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORFSUNPROC) (GLfloat factor); +typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORDSUNPROC) (GLdouble factor); +typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORUBSUNPROC) (GLubyte factor); +typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORUSSUNPROC) (GLushort factor); +typedef void (APIENTRYP PFNGLGLOBALALPHAFACTORUISUNPROC) (GLuint factor); +#endif + +#ifndef GL_SUN_triangle_list +#define GL_SUN_triangle_list 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glReplacementCodeuiSUN (GLuint code); +GLAPI void APIENTRY glReplacementCodeusSUN (GLushort code); +GLAPI void APIENTRY glReplacementCodeubSUN (GLubyte code); +GLAPI void APIENTRY glReplacementCodeuivSUN (const GLuint *code); +GLAPI void APIENTRY glReplacementCodeusvSUN (const GLushort *code); +GLAPI void APIENTRY glReplacementCodeubvSUN (const GLubyte *code); +GLAPI void APIENTRY glReplacementCodePointerSUN (GLenum type, GLsizei stride, const GLvoid* *pointer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUISUNPROC) (GLuint code); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUSSUNPROC) (GLushort code); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUBSUNPROC) (GLubyte code); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUIVSUNPROC) (const GLuint *code); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUSVSUNPROC) (const GLushort *code); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUBVSUNPROC) (const GLubyte *code); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEPOINTERSUNPROC) (GLenum type, GLsizei stride, const GLvoid* *pointer); +#endif + +#ifndef GL_SUN_vertex +#define GL_SUN_vertex 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glColor4ubVertex2fSUN (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y); +GLAPI void APIENTRY glColor4ubVertex2fvSUN (const GLubyte *c, const GLfloat *v); +GLAPI void APIENTRY glColor4ubVertex3fSUN (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glColor4ubVertex3fvSUN (const GLubyte *c, const GLfloat *v); +GLAPI void APIENTRY glColor3fVertex3fSUN (GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glColor3fVertex3fvSUN (const GLfloat *c, const GLfloat *v); +GLAPI void APIENTRY glNormal3fVertex3fSUN (GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glNormal3fVertex3fvSUN (const GLfloat *n, const GLfloat *v); +GLAPI void APIENTRY glColor4fNormal3fVertex3fSUN (GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glColor4fNormal3fVertex3fvSUN (const GLfloat *c, const GLfloat *n, const GLfloat *v); +GLAPI void APIENTRY glTexCoord2fVertex3fSUN (GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glTexCoord2fVertex3fvSUN (const GLfloat *tc, const GLfloat *v); +GLAPI void APIENTRY glTexCoord4fVertex4fSUN (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glTexCoord4fVertex4fvSUN (const GLfloat *tc, const GLfloat *v); +GLAPI void APIENTRY glTexCoord2fColor4ubVertex3fSUN (GLfloat s, GLfloat t, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glTexCoord2fColor4ubVertex3fvSUN (const GLfloat *tc, const GLubyte *c, const GLfloat *v); +GLAPI void APIENTRY glTexCoord2fColor3fVertex3fSUN (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glTexCoord2fColor3fVertex3fvSUN (const GLfloat *tc, const GLfloat *c, const GLfloat *v); +GLAPI void APIENTRY glTexCoord2fNormal3fVertex3fSUN (GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glTexCoord2fNormal3fVertex3fvSUN (const GLfloat *tc, const GLfloat *n, const GLfloat *v); +GLAPI void APIENTRY glTexCoord2fColor4fNormal3fVertex3fSUN (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glTexCoord2fColor4fNormal3fVertex3fvSUN (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v); +GLAPI void APIENTRY glTexCoord4fColor4fNormal3fVertex4fSUN (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glTexCoord4fColor4fNormal3fVertex4fvSUN (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v); +GLAPI void APIENTRY glReplacementCodeuiVertex3fSUN (GLuint rc, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glReplacementCodeuiVertex3fvSUN (const GLuint *rc, const GLfloat *v); +GLAPI void APIENTRY glReplacementCodeuiColor4ubVertex3fSUN (GLuint rc, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glReplacementCodeuiColor4ubVertex3fvSUN (const GLuint *rc, const GLubyte *c, const GLfloat *v); +GLAPI void APIENTRY glReplacementCodeuiColor3fVertex3fSUN (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glReplacementCodeuiColor3fVertex3fvSUN (const GLuint *rc, const GLfloat *c, const GLfloat *v); +GLAPI void APIENTRY glReplacementCodeuiNormal3fVertex3fSUN (GLuint rc, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glReplacementCodeuiNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *n, const GLfloat *v); +GLAPI void APIENTRY glReplacementCodeuiColor4fNormal3fVertex3fSUN (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glReplacementCodeuiColor4fNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *c, const GLfloat *n, const GLfloat *v); +GLAPI void APIENTRY glReplacementCodeuiTexCoord2fVertex3fSUN (GLuint rc, GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glReplacementCodeuiTexCoord2fVertex3fvSUN (const GLuint *rc, const GLfloat *tc, const GLfloat *v); +GLAPI void APIENTRY glReplacementCodeuiTexCoord2fNormal3fVertex3fSUN (GLuint rc, GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glReplacementCodeuiTexCoord2fNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *tc, const GLfloat *n, const GLfloat *v); +GLAPI void APIENTRY glReplacementCodeuiTexCoord2fColor4fNormal3fVertex3fSUN (GLuint rc, GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glReplacementCodeuiTexCoord2fColor4fNormal3fVertex3fvSUN (const GLuint *rc, const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX2FSUNPROC) (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y); +typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX2FVSUNPROC) (const GLubyte *c, const GLfloat *v); +typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX3FSUNPROC) (GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLCOLOR4UBVERTEX3FVSUNPROC) (const GLubyte *c, const GLfloat *v); +typedef void (APIENTRYP PFNGLCOLOR3FVERTEX3FSUNPROC) (GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLCOLOR3FVERTEX3FVSUNPROC) (const GLfloat *c, const GLfloat *v); +typedef void (APIENTRYP PFNGLNORMAL3FVERTEX3FSUNPROC) (GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *n, const GLfloat *v); +typedef void (APIENTRYP PFNGLCOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLCOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *c, const GLfloat *n, const GLfloat *v); +typedef void (APIENTRYP PFNGLTEXCOORD2FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLTEXCOORD2FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *v); +typedef void (APIENTRYP PFNGLTEXCOORD4FVERTEX4FSUNPROC) (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLTEXCOORD4FVERTEX4FVSUNPROC) (const GLfloat *tc, const GLfloat *v); +typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4UBVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4UBVERTEX3FVSUNPROC) (const GLfloat *tc, const GLubyte *c, const GLfloat *v); +typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR3FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR3FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *c, const GLfloat *v); +typedef void (APIENTRYP PFNGLTEXCOORD2FNORMAL3FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLTEXCOORD2FNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *n, const GLfloat *v); +typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLTEXCOORD2FCOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v); +typedef void (APIENTRYP PFNGLTEXCOORD4FCOLOR4FNORMAL3FVERTEX4FSUNPROC) (GLfloat s, GLfloat t, GLfloat p, GLfloat q, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLTEXCOORD4FCOLOR4FNORMAL3FVERTEX4FVSUNPROC) (const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUIVERTEX3FSUNPROC) (GLuint rc, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUIVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *v); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4UBVERTEX3FSUNPROC) (GLuint rc, GLubyte r, GLubyte g, GLubyte b, GLubyte a, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4UBVERTEX3FVSUNPROC) (const GLuint *rc, const GLubyte *c, const GLfloat *v); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR3FVERTEX3FSUNPROC) (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *c, const GLfloat *v); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUINORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUINORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *n, const GLfloat *v); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUICOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *c, const GLfloat *n, const GLfloat *v); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FVERTEX3FSUNPROC) (GLuint rc, GLfloat s, GLfloat t, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *tc, const GLfloat *v); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FNORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat s, GLfloat t, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FNORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *tc, const GLfloat *n, const GLfloat *v); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FCOLOR4FNORMAL3FVERTEX3FSUNPROC) (GLuint rc, GLfloat s, GLfloat t, GLfloat r, GLfloat g, GLfloat b, GLfloat a, GLfloat nx, GLfloat ny, GLfloat nz, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLREPLACEMENTCODEUITEXCOORD2FCOLOR4FNORMAL3FVERTEX3FVSUNPROC) (const GLuint *rc, const GLfloat *tc, const GLfloat *c, const GLfloat *n, const GLfloat *v); +#endif + +#ifndef GL_EXT_blend_func_separate +#define GL_EXT_blend_func_separate 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBlendFuncSeparateEXT (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEEXTPROC) (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha); +#endif + +#ifndef GL_INGR_blend_func_separate +#define GL_INGR_blend_func_separate 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBlendFuncSeparateINGR (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEINGRPROC) (GLenum sfactorRGB, GLenum dfactorRGB, GLenum sfactorAlpha, GLenum dfactorAlpha); +#endif + +#ifndef GL_INGR_color_clamp +#define GL_INGR_color_clamp 1 +#endif + +#ifndef GL_INGR_interlace_read +#define GL_INGR_interlace_read 1 +#endif + +#ifndef GL_EXT_stencil_wrap +#define GL_EXT_stencil_wrap 1 +#endif + +#ifndef GL_EXT_422_pixels +#define GL_EXT_422_pixels 1 +#endif + +#ifndef GL_NV_texgen_reflection +#define GL_NV_texgen_reflection 1 +#endif + +#ifndef GL_SUN_convolution_border_modes +#define GL_SUN_convolution_border_modes 1 +#endif + +#ifndef GL_EXT_texture_env_add +#define GL_EXT_texture_env_add 1 +#endif + +#ifndef GL_EXT_texture_lod_bias +#define GL_EXT_texture_lod_bias 1 +#endif + +#ifndef GL_EXT_texture_filter_anisotropic +#define GL_EXT_texture_filter_anisotropic 1 +#endif + +#ifndef GL_EXT_vertex_weighting +#define GL_EXT_vertex_weighting 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexWeightfEXT (GLfloat weight); +GLAPI void APIENTRY glVertexWeightfvEXT (const GLfloat *weight); +GLAPI void APIENTRY glVertexWeightPointerEXT (GLsizei size, GLenum type, GLsizei stride, const GLvoid *pointer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXWEIGHTFEXTPROC) (GLfloat weight); +typedef void (APIENTRYP PFNGLVERTEXWEIGHTFVEXTPROC) (const GLfloat *weight); +typedef void (APIENTRYP PFNGLVERTEXWEIGHTPOINTEREXTPROC) (GLsizei size, GLenum type, GLsizei stride, const GLvoid *pointer); +#endif + +#ifndef GL_NV_light_max_exponent +#define GL_NV_light_max_exponent 1 +#endif + +#ifndef GL_NV_vertex_array_range +#define GL_NV_vertex_array_range 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glFlushVertexArrayRangeNV (void); +GLAPI void APIENTRY glVertexArrayRangeNV (GLsizei length, const GLvoid *pointer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLFLUSHVERTEXARRAYRANGENVPROC) (void); +typedef void (APIENTRYP PFNGLVERTEXARRAYRANGENVPROC) (GLsizei length, const GLvoid *pointer); +#endif + +#ifndef GL_NV_register_combiners +#define GL_NV_register_combiners 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glCombinerParameterfvNV (GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glCombinerParameterfNV (GLenum pname, GLfloat param); +GLAPI void APIENTRY glCombinerParameterivNV (GLenum pname, const GLint *params); +GLAPI void APIENTRY glCombinerParameteriNV (GLenum pname, GLint param); +GLAPI void APIENTRY glCombinerInputNV (GLenum stage, GLenum portion, GLenum variable, GLenum input, GLenum mapping, GLenum componentUsage); +GLAPI void APIENTRY glCombinerOutputNV (GLenum stage, GLenum portion, GLenum abOutput, GLenum cdOutput, GLenum sumOutput, GLenum scale, GLenum bias, GLboolean abDotProduct, GLboolean cdDotProduct, GLboolean muxSum); +GLAPI void APIENTRY glFinalCombinerInputNV (GLenum variable, GLenum input, GLenum mapping, GLenum componentUsage); +GLAPI void APIENTRY glGetCombinerInputParameterfvNV (GLenum stage, GLenum portion, GLenum variable, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetCombinerInputParameterivNV (GLenum stage, GLenum portion, GLenum variable, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetCombinerOutputParameterfvNV (GLenum stage, GLenum portion, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetCombinerOutputParameterivNV (GLenum stage, GLenum portion, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetFinalCombinerInputParameterfvNV (GLenum variable, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetFinalCombinerInputParameterivNV (GLenum variable, GLenum pname, GLint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOMBINERPARAMETERFVNVPROC) (GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLCOMBINERPARAMETERFNVPROC) (GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLCOMBINERPARAMETERIVNVPROC) (GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLCOMBINERPARAMETERINVPROC) (GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLCOMBINERINPUTNVPROC) (GLenum stage, GLenum portion, GLenum variable, GLenum input, GLenum mapping, GLenum componentUsage); +typedef void (APIENTRYP PFNGLCOMBINEROUTPUTNVPROC) (GLenum stage, GLenum portion, GLenum abOutput, GLenum cdOutput, GLenum sumOutput, GLenum scale, GLenum bias, GLboolean abDotProduct, GLboolean cdDotProduct, GLboolean muxSum); +typedef void (APIENTRYP PFNGLFINALCOMBINERINPUTNVPROC) (GLenum variable, GLenum input, GLenum mapping, GLenum componentUsage); +typedef void (APIENTRYP PFNGLGETCOMBINERINPUTPARAMETERFVNVPROC) (GLenum stage, GLenum portion, GLenum variable, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETCOMBINERINPUTPARAMETERIVNVPROC) (GLenum stage, GLenum portion, GLenum variable, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETCOMBINEROUTPUTPARAMETERFVNVPROC) (GLenum stage, GLenum portion, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETCOMBINEROUTPUTPARAMETERIVNVPROC) (GLenum stage, GLenum portion, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETFINALCOMBINERINPUTPARAMETERFVNVPROC) (GLenum variable, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETFINALCOMBINERINPUTPARAMETERIVNVPROC) (GLenum variable, GLenum pname, GLint *params); +#endif + +#ifndef GL_NV_fog_distance +#define GL_NV_fog_distance 1 +#endif + +#ifndef GL_NV_texgen_emboss +#define GL_NV_texgen_emboss 1 +#endif + +#ifndef GL_NV_blend_square +#define GL_NV_blend_square 1 +#endif + +#ifndef GL_NV_texture_env_combine4 +#define GL_NV_texture_env_combine4 1 +#endif + +#ifndef GL_MESA_resize_buffers +#define GL_MESA_resize_buffers 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glResizeBuffersMESA (void); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLRESIZEBUFFERSMESAPROC) (void); +#endif + +#ifndef GL_MESA_window_pos +#define GL_MESA_window_pos 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glWindowPos2dMESA (GLdouble x, GLdouble y); +GLAPI void APIENTRY glWindowPos2dvMESA (const GLdouble *v); +GLAPI void APIENTRY glWindowPos2fMESA (GLfloat x, GLfloat y); +GLAPI void APIENTRY glWindowPos2fvMESA (const GLfloat *v); +GLAPI void APIENTRY glWindowPos2iMESA (GLint x, GLint y); +GLAPI void APIENTRY glWindowPos2ivMESA (const GLint *v); +GLAPI void APIENTRY glWindowPos2sMESA (GLshort x, GLshort y); +GLAPI void APIENTRY glWindowPos2svMESA (const GLshort *v); +GLAPI void APIENTRY glWindowPos3dMESA (GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glWindowPos3dvMESA (const GLdouble *v); +GLAPI void APIENTRY glWindowPos3fMESA (GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glWindowPos3fvMESA (const GLfloat *v); +GLAPI void APIENTRY glWindowPos3iMESA (GLint x, GLint y, GLint z); +GLAPI void APIENTRY glWindowPos3ivMESA (const GLint *v); +GLAPI void APIENTRY glWindowPos3sMESA (GLshort x, GLshort y, GLshort z); +GLAPI void APIENTRY glWindowPos3svMESA (const GLshort *v); +GLAPI void APIENTRY glWindowPos4dMESA (GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glWindowPos4dvMESA (const GLdouble *v); +GLAPI void APIENTRY glWindowPos4fMESA (GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glWindowPos4fvMESA (const GLfloat *v); +GLAPI void APIENTRY glWindowPos4iMESA (GLint x, GLint y, GLint z, GLint w); +GLAPI void APIENTRY glWindowPos4ivMESA (const GLint *v); +GLAPI void APIENTRY glWindowPos4sMESA (GLshort x, GLshort y, GLshort z, GLshort w); +GLAPI void APIENTRY glWindowPos4svMESA (const GLshort *v); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLWINDOWPOS2DMESAPROC) (GLdouble x, GLdouble y); +typedef void (APIENTRYP PFNGLWINDOWPOS2DVMESAPROC) (const GLdouble *v); +typedef void (APIENTRYP PFNGLWINDOWPOS2FMESAPROC) (GLfloat x, GLfloat y); +typedef void (APIENTRYP PFNGLWINDOWPOS2FVMESAPROC) (const GLfloat *v); +typedef void (APIENTRYP PFNGLWINDOWPOS2IMESAPROC) (GLint x, GLint y); +typedef void (APIENTRYP PFNGLWINDOWPOS2IVMESAPROC) (const GLint *v); +typedef void (APIENTRYP PFNGLWINDOWPOS2SMESAPROC) (GLshort x, GLshort y); +typedef void (APIENTRYP PFNGLWINDOWPOS2SVMESAPROC) (const GLshort *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3DMESAPROC) (GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLWINDOWPOS3DVMESAPROC) (const GLdouble *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3FMESAPROC) (GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLWINDOWPOS3FVMESAPROC) (const GLfloat *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3IMESAPROC) (GLint x, GLint y, GLint z); +typedef void (APIENTRYP PFNGLWINDOWPOS3IVMESAPROC) (const GLint *v); +typedef void (APIENTRYP PFNGLWINDOWPOS3SMESAPROC) (GLshort x, GLshort y, GLshort z); +typedef void (APIENTRYP PFNGLWINDOWPOS3SVMESAPROC) (const GLshort *v); +typedef void (APIENTRYP PFNGLWINDOWPOS4DMESAPROC) (GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLWINDOWPOS4DVMESAPROC) (const GLdouble *v); +typedef void (APIENTRYP PFNGLWINDOWPOS4FMESAPROC) (GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLWINDOWPOS4FVMESAPROC) (const GLfloat *v); +typedef void (APIENTRYP PFNGLWINDOWPOS4IMESAPROC) (GLint x, GLint y, GLint z, GLint w); +typedef void (APIENTRYP PFNGLWINDOWPOS4IVMESAPROC) (const GLint *v); +typedef void (APIENTRYP PFNGLWINDOWPOS4SMESAPROC) (GLshort x, GLshort y, GLshort z, GLshort w); +typedef void (APIENTRYP PFNGLWINDOWPOS4SVMESAPROC) (const GLshort *v); +#endif + +#ifndef GL_IBM_cull_vertex +#define GL_IBM_cull_vertex 1 +#endif + +#ifndef GL_IBM_multimode_draw_arrays +#define GL_IBM_multimode_draw_arrays 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glMultiModeDrawArraysIBM (const GLenum *mode, const GLint *first, const GLsizei *count, GLsizei primcount, GLint modestride); +GLAPI void APIENTRY glMultiModeDrawElementsIBM (const GLenum *mode, const GLsizei *count, GLenum type, const GLvoid* const *indices, GLsizei primcount, GLint modestride); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLMULTIMODEDRAWARRAYSIBMPROC) (const GLenum *mode, const GLint *first, const GLsizei *count, GLsizei primcount, GLint modestride); +typedef void (APIENTRYP PFNGLMULTIMODEDRAWELEMENTSIBMPROC) (const GLenum *mode, const GLsizei *count, GLenum type, const GLvoid* const *indices, GLsizei primcount, GLint modestride); +#endif + +#ifndef GL_IBM_vertex_array_lists +#define GL_IBM_vertex_array_lists 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glColorPointerListIBM (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +GLAPI void APIENTRY glSecondaryColorPointerListIBM (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +GLAPI void APIENTRY glEdgeFlagPointerListIBM (GLint stride, const GLboolean* *pointer, GLint ptrstride); +GLAPI void APIENTRY glFogCoordPointerListIBM (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +GLAPI void APIENTRY glIndexPointerListIBM (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +GLAPI void APIENTRY glNormalPointerListIBM (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +GLAPI void APIENTRY glTexCoordPointerListIBM (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +GLAPI void APIENTRY glVertexPointerListIBM (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOLORPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +typedef void (APIENTRYP PFNGLSECONDARYCOLORPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +typedef void (APIENTRYP PFNGLEDGEFLAGPOINTERLISTIBMPROC) (GLint stride, const GLboolean* *pointer, GLint ptrstride); +typedef void (APIENTRYP PFNGLFOGCOORDPOINTERLISTIBMPROC) (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +typedef void (APIENTRYP PFNGLINDEXPOINTERLISTIBMPROC) (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +typedef void (APIENTRYP PFNGLNORMALPOINTERLISTIBMPROC) (GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +typedef void (APIENTRYP PFNGLTEXCOORDPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +typedef void (APIENTRYP PFNGLVERTEXPOINTERLISTIBMPROC) (GLint size, GLenum type, GLint stride, const GLvoid* *pointer, GLint ptrstride); +#endif + +#ifndef GL_SGIX_subsample +#define GL_SGIX_subsample 1 +#endif + +#ifndef GL_SGIX_ycrcba +#define GL_SGIX_ycrcba 1 +#endif + +#ifndef GL_SGIX_ycrcb_subsample +#define GL_SGIX_ycrcb_subsample 1 +#endif + +#ifndef GL_SGIX_depth_pass_instrument +#define GL_SGIX_depth_pass_instrument 1 +#endif + +#ifndef GL_3DFX_texture_compression_FXT1 +#define GL_3DFX_texture_compression_FXT1 1 +#endif + +#ifndef GL_3DFX_multisample +#define GL_3DFX_multisample 1 +#endif + +#ifndef GL_3DFX_tbuffer +#define GL_3DFX_tbuffer 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTbufferMask3DFX (GLuint mask); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTBUFFERMASK3DFXPROC) (GLuint mask); +#endif + +#ifndef GL_EXT_multisample +#define GL_EXT_multisample 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glSampleMaskEXT (GLclampf value, GLboolean invert); +GLAPI void APIENTRY glSamplePatternEXT (GLenum pattern); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLSAMPLEMASKEXTPROC) (GLclampf value, GLboolean invert); +typedef void (APIENTRYP PFNGLSAMPLEPATTERNEXTPROC) (GLenum pattern); +#endif + +#ifndef GL_SGIX_vertex_preclip +#define GL_SGIX_vertex_preclip 1 +#endif + +#ifndef GL_SGIX_convolution_accuracy +#define GL_SGIX_convolution_accuracy 1 +#endif + +#ifndef GL_SGIX_resample +#define GL_SGIX_resample 1 +#endif + +#ifndef GL_SGIS_point_line_texgen +#define GL_SGIS_point_line_texgen 1 +#endif + +#ifndef GL_SGIS_texture_color_mask +#define GL_SGIS_texture_color_mask 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTextureColorMaskSGIS (GLboolean red, GLboolean green, GLboolean blue, GLboolean alpha); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXTURECOLORMASKSGISPROC) (GLboolean red, GLboolean green, GLboolean blue, GLboolean alpha); +#endif + +#ifndef GL_SGIX_igloo_interface +#define GL_SGIX_igloo_interface 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glIglooInterfaceSGIX (GLenum pname, const GLvoid *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLIGLOOINTERFACESGIXPROC) (GLenum pname, const GLvoid *params); +#endif + +#ifndef GL_EXT_texture_env_dot3 +#define GL_EXT_texture_env_dot3 1 +#endif + +#ifndef GL_ATI_texture_mirror_once +#define GL_ATI_texture_mirror_once 1 +#endif + +#ifndef GL_NV_fence +#define GL_NV_fence 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDeleteFencesNV (GLsizei n, const GLuint *fences); +GLAPI void APIENTRY glGenFencesNV (GLsizei n, GLuint *fences); +GLAPI GLboolean APIENTRY glIsFenceNV (GLuint fence); +GLAPI GLboolean APIENTRY glTestFenceNV (GLuint fence); +GLAPI void APIENTRY glGetFenceivNV (GLuint fence, GLenum pname, GLint *params); +GLAPI void APIENTRY glFinishFenceNV (GLuint fence); +GLAPI void APIENTRY glSetFenceNV (GLuint fence, GLenum condition); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDELETEFENCESNVPROC) (GLsizei n, const GLuint *fences); +typedef void (APIENTRYP PFNGLGENFENCESNVPROC) (GLsizei n, GLuint *fences); +typedef GLboolean (APIENTRYP PFNGLISFENCENVPROC) (GLuint fence); +typedef GLboolean (APIENTRYP PFNGLTESTFENCENVPROC) (GLuint fence); +typedef void (APIENTRYP PFNGLGETFENCEIVNVPROC) (GLuint fence, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLFINISHFENCENVPROC) (GLuint fence); +typedef void (APIENTRYP PFNGLSETFENCENVPROC) (GLuint fence, GLenum condition); +#endif + +#ifndef GL_NV_evaluators +#define GL_NV_evaluators 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glMapControlPointsNV (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLint uorder, GLint vorder, GLboolean packed, const GLvoid *points); +GLAPI void APIENTRY glMapParameterivNV (GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glMapParameterfvNV (GLenum target, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glGetMapControlPointsNV (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLboolean packed, GLvoid *points); +GLAPI void APIENTRY glGetMapParameterivNV (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetMapParameterfvNV (GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetMapAttribParameterivNV (GLenum target, GLuint index, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetMapAttribParameterfvNV (GLenum target, GLuint index, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glEvalMapsNV (GLenum target, GLenum mode); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLMAPCONTROLPOINTSNVPROC) (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLint uorder, GLint vorder, GLboolean packed, const GLvoid *points); +typedef void (APIENTRYP PFNGLMAPPARAMETERIVNVPROC) (GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLMAPPARAMETERFVNVPROC) (GLenum target, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLGETMAPCONTROLPOINTSNVPROC) (GLenum target, GLuint index, GLenum type, GLsizei ustride, GLsizei vstride, GLboolean packed, GLvoid *points); +typedef void (APIENTRYP PFNGLGETMAPPARAMETERIVNVPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETMAPPARAMETERFVNVPROC) (GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETMAPATTRIBPARAMETERIVNVPROC) (GLenum target, GLuint index, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETMAPATTRIBPARAMETERFVNVPROC) (GLenum target, GLuint index, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLEVALMAPSNVPROC) (GLenum target, GLenum mode); +#endif + +#ifndef GL_NV_packed_depth_stencil +#define GL_NV_packed_depth_stencil 1 +#endif + +#ifndef GL_NV_register_combiners2 +#define GL_NV_register_combiners2 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glCombinerStageParameterfvNV (GLenum stage, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glGetCombinerStageParameterfvNV (GLenum stage, GLenum pname, GLfloat *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOMBINERSTAGEPARAMETERFVNVPROC) (GLenum stage, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLGETCOMBINERSTAGEPARAMETERFVNVPROC) (GLenum stage, GLenum pname, GLfloat *params); +#endif + +#ifndef GL_NV_texture_compression_vtc +#define GL_NV_texture_compression_vtc 1 +#endif + +#ifndef GL_NV_texture_rectangle +#define GL_NV_texture_rectangle 1 +#endif + +#ifndef GL_NV_texture_shader +#define GL_NV_texture_shader 1 +#endif + +#ifndef GL_NV_texture_shader2 +#define GL_NV_texture_shader2 1 +#endif + +#ifndef GL_NV_vertex_array_range2 +#define GL_NV_vertex_array_range2 1 +#endif + +#ifndef GL_NV_vertex_program +#define GL_NV_vertex_program 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLboolean APIENTRY glAreProgramsResidentNV (GLsizei n, const GLuint *programs, GLboolean *residences); +GLAPI void APIENTRY glBindProgramNV (GLenum target, GLuint id); +GLAPI void APIENTRY glDeleteProgramsNV (GLsizei n, const GLuint *programs); +GLAPI void APIENTRY glExecuteProgramNV (GLenum target, GLuint id, const GLfloat *params); +GLAPI void APIENTRY glGenProgramsNV (GLsizei n, GLuint *programs); +GLAPI void APIENTRY glGetProgramParameterdvNV (GLenum target, GLuint index, GLenum pname, GLdouble *params); +GLAPI void APIENTRY glGetProgramParameterfvNV (GLenum target, GLuint index, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetProgramivNV (GLuint id, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetProgramStringNV (GLuint id, GLenum pname, GLubyte *program); +GLAPI void APIENTRY glGetTrackMatrixivNV (GLenum target, GLuint address, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetVertexAttribdvNV (GLuint index, GLenum pname, GLdouble *params); +GLAPI void APIENTRY glGetVertexAttribfvNV (GLuint index, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetVertexAttribivNV (GLuint index, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetVertexAttribPointervNV (GLuint index, GLenum pname, GLvoid* *pointer); +GLAPI GLboolean APIENTRY glIsProgramNV (GLuint id); +GLAPI void APIENTRY glLoadProgramNV (GLenum target, GLuint id, GLsizei len, const GLubyte *program); +GLAPI void APIENTRY glProgramParameter4dNV (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glProgramParameter4dvNV (GLenum target, GLuint index, const GLdouble *v); +GLAPI void APIENTRY glProgramParameter4fNV (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glProgramParameter4fvNV (GLenum target, GLuint index, const GLfloat *v); +GLAPI void APIENTRY glProgramParameters4dvNV (GLenum target, GLuint index, GLuint count, const GLdouble *v); +GLAPI void APIENTRY glProgramParameters4fvNV (GLenum target, GLuint index, GLuint count, const GLfloat *v); +GLAPI void APIENTRY glRequestResidentProgramsNV (GLsizei n, const GLuint *programs); +GLAPI void APIENTRY glTrackMatrixNV (GLenum target, GLuint address, GLenum matrix, GLenum transform); +GLAPI void APIENTRY glVertexAttribPointerNV (GLuint index, GLint fsize, GLenum type, GLsizei stride, const GLvoid *pointer); +GLAPI void APIENTRY glVertexAttrib1dNV (GLuint index, GLdouble x); +GLAPI void APIENTRY glVertexAttrib1dvNV (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib1fNV (GLuint index, GLfloat x); +GLAPI void APIENTRY glVertexAttrib1fvNV (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib1sNV (GLuint index, GLshort x); +GLAPI void APIENTRY glVertexAttrib1svNV (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib2dNV (GLuint index, GLdouble x, GLdouble y); +GLAPI void APIENTRY glVertexAttrib2dvNV (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib2fNV (GLuint index, GLfloat x, GLfloat y); +GLAPI void APIENTRY glVertexAttrib2fvNV (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib2sNV (GLuint index, GLshort x, GLshort y); +GLAPI void APIENTRY glVertexAttrib2svNV (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib3dNV (GLuint index, GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glVertexAttrib3dvNV (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib3fNV (GLuint index, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glVertexAttrib3fvNV (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib3sNV (GLuint index, GLshort x, GLshort y, GLshort z); +GLAPI void APIENTRY glVertexAttrib3svNV (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib4dNV (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glVertexAttrib4dvNV (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttrib4fNV (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glVertexAttrib4fvNV (GLuint index, const GLfloat *v); +GLAPI void APIENTRY glVertexAttrib4sNV (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w); +GLAPI void APIENTRY glVertexAttrib4svNV (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttrib4ubNV (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w); +GLAPI void APIENTRY glVertexAttrib4ubvNV (GLuint index, const GLubyte *v); +GLAPI void APIENTRY glVertexAttribs1dvNV (GLuint index, GLsizei count, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribs1fvNV (GLuint index, GLsizei count, const GLfloat *v); +GLAPI void APIENTRY glVertexAttribs1svNV (GLuint index, GLsizei count, const GLshort *v); +GLAPI void APIENTRY glVertexAttribs2dvNV (GLuint index, GLsizei count, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribs2fvNV (GLuint index, GLsizei count, const GLfloat *v); +GLAPI void APIENTRY glVertexAttribs2svNV (GLuint index, GLsizei count, const GLshort *v); +GLAPI void APIENTRY glVertexAttribs3dvNV (GLuint index, GLsizei count, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribs3fvNV (GLuint index, GLsizei count, const GLfloat *v); +GLAPI void APIENTRY glVertexAttribs3svNV (GLuint index, GLsizei count, const GLshort *v); +GLAPI void APIENTRY glVertexAttribs4dvNV (GLuint index, GLsizei count, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribs4fvNV (GLuint index, GLsizei count, const GLfloat *v); +GLAPI void APIENTRY glVertexAttribs4svNV (GLuint index, GLsizei count, const GLshort *v); +GLAPI void APIENTRY glVertexAttribs4ubvNV (GLuint index, GLsizei count, const GLubyte *v); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLboolean (APIENTRYP PFNGLAREPROGRAMSRESIDENTNVPROC) (GLsizei n, const GLuint *programs, GLboolean *residences); +typedef void (APIENTRYP PFNGLBINDPROGRAMNVPROC) (GLenum target, GLuint id); +typedef void (APIENTRYP PFNGLDELETEPROGRAMSNVPROC) (GLsizei n, const GLuint *programs); +typedef void (APIENTRYP PFNGLEXECUTEPROGRAMNVPROC) (GLenum target, GLuint id, const GLfloat *params); +typedef void (APIENTRYP PFNGLGENPROGRAMSNVPROC) (GLsizei n, GLuint *programs); +typedef void (APIENTRYP PFNGLGETPROGRAMPARAMETERDVNVPROC) (GLenum target, GLuint index, GLenum pname, GLdouble *params); +typedef void (APIENTRYP PFNGLGETPROGRAMPARAMETERFVNVPROC) (GLenum target, GLuint index, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETPROGRAMIVNVPROC) (GLuint id, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETPROGRAMSTRINGNVPROC) (GLuint id, GLenum pname, GLubyte *program); +typedef void (APIENTRYP PFNGLGETTRACKMATRIXIVNVPROC) (GLenum target, GLuint address, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBDVNVPROC) (GLuint index, GLenum pname, GLdouble *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBFVNVPROC) (GLuint index, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIVNVPROC) (GLuint index, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBPOINTERVNVPROC) (GLuint index, GLenum pname, GLvoid* *pointer); +typedef GLboolean (APIENTRYP PFNGLISPROGRAMNVPROC) (GLuint id); +typedef void (APIENTRYP PFNGLLOADPROGRAMNVPROC) (GLenum target, GLuint id, GLsizei len, const GLubyte *program); +typedef void (APIENTRYP PFNGLPROGRAMPARAMETER4DNVPROC) (GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLPROGRAMPARAMETER4DVNVPROC) (GLenum target, GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLPROGRAMPARAMETER4FNVPROC) (GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLPROGRAMPARAMETER4FVNVPROC) (GLenum target, GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLPROGRAMPARAMETERS4DVNVPROC) (GLenum target, GLuint index, GLuint count, const GLdouble *v); +typedef void (APIENTRYP PFNGLPROGRAMPARAMETERS4FVNVPROC) (GLenum target, GLuint index, GLuint count, const GLfloat *v); +typedef void (APIENTRYP PFNGLREQUESTRESIDENTPROGRAMSNVPROC) (GLsizei n, const GLuint *programs); +typedef void (APIENTRYP PFNGLTRACKMATRIXNVPROC) (GLenum target, GLuint address, GLenum matrix, GLenum transform); +typedef void (APIENTRYP PFNGLVERTEXATTRIBPOINTERNVPROC) (GLuint index, GLint fsize, GLenum type, GLsizei stride, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1DNVPROC) (GLuint index, GLdouble x); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1DVNVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1FNVPROC) (GLuint index, GLfloat x); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1FVNVPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1SNVPROC) (GLuint index, GLshort x); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1SVNVPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2DNVPROC) (GLuint index, GLdouble x, GLdouble y); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2DVNVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2FNVPROC) (GLuint index, GLfloat x, GLfloat y); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2FVNVPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2SNVPROC) (GLuint index, GLshort x, GLshort y); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2SVNVPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3DNVPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3DVNVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3FNVPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3FVNVPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3SNVPROC) (GLuint index, GLshort x, GLshort y, GLshort z); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3SVNVPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4DNVPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4DVNVPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4FNVPROC) (GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4FVNVPROC) (GLuint index, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4SNVPROC) (GLuint index, GLshort x, GLshort y, GLshort z, GLshort w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4SVNVPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4UBNVPROC) (GLuint index, GLubyte x, GLubyte y, GLubyte z, GLubyte w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4UBVNVPROC) (GLuint index, const GLubyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS1DVNVPROC) (GLuint index, GLsizei count, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS1FVNVPROC) (GLuint index, GLsizei count, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS1SVNVPROC) (GLuint index, GLsizei count, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS2DVNVPROC) (GLuint index, GLsizei count, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS2FVNVPROC) (GLuint index, GLsizei count, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS2SVNVPROC) (GLuint index, GLsizei count, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS3DVNVPROC) (GLuint index, GLsizei count, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS3FVNVPROC) (GLuint index, GLsizei count, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS3SVNVPROC) (GLuint index, GLsizei count, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS4DVNVPROC) (GLuint index, GLsizei count, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS4FVNVPROC) (GLuint index, GLsizei count, const GLfloat *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS4SVNVPROC) (GLuint index, GLsizei count, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS4UBVNVPROC) (GLuint index, GLsizei count, const GLubyte *v); +#endif + +#ifndef GL_SGIX_texture_coordinate_clamp +#define GL_SGIX_texture_coordinate_clamp 1 +#endif + +#ifndef GL_SGIX_scalebias_hint +#define GL_SGIX_scalebias_hint 1 +#endif + +#ifndef GL_OML_interlace +#define GL_OML_interlace 1 +#endif + +#ifndef GL_OML_subsample +#define GL_OML_subsample 1 +#endif + +#ifndef GL_OML_resample +#define GL_OML_resample 1 +#endif + +#ifndef GL_NV_copy_depth_to_color +#define GL_NV_copy_depth_to_color 1 +#endif + +#ifndef GL_ATI_envmap_bumpmap +#define GL_ATI_envmap_bumpmap 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTexBumpParameterivATI (GLenum pname, const GLint *param); +GLAPI void APIENTRY glTexBumpParameterfvATI (GLenum pname, const GLfloat *param); +GLAPI void APIENTRY glGetTexBumpParameterivATI (GLenum pname, GLint *param); +GLAPI void APIENTRY glGetTexBumpParameterfvATI (GLenum pname, GLfloat *param); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXBUMPPARAMETERIVATIPROC) (GLenum pname, const GLint *param); +typedef void (APIENTRYP PFNGLTEXBUMPPARAMETERFVATIPROC) (GLenum pname, const GLfloat *param); +typedef void (APIENTRYP PFNGLGETTEXBUMPPARAMETERIVATIPROC) (GLenum pname, GLint *param); +typedef void (APIENTRYP PFNGLGETTEXBUMPPARAMETERFVATIPROC) (GLenum pname, GLfloat *param); +#endif + +#ifndef GL_ATI_fragment_shader +#define GL_ATI_fragment_shader 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLuint APIENTRY glGenFragmentShadersATI (GLuint range); +GLAPI void APIENTRY glBindFragmentShaderATI (GLuint id); +GLAPI void APIENTRY glDeleteFragmentShaderATI (GLuint id); +GLAPI void APIENTRY glBeginFragmentShaderATI (void); +GLAPI void APIENTRY glEndFragmentShaderATI (void); +GLAPI void APIENTRY glPassTexCoordATI (GLuint dst, GLuint coord, GLenum swizzle); +GLAPI void APIENTRY glSampleMapATI (GLuint dst, GLuint interp, GLenum swizzle); +GLAPI void APIENTRY glColorFragmentOp1ATI (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod); +GLAPI void APIENTRY glColorFragmentOp2ATI (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod); +GLAPI void APIENTRY glColorFragmentOp3ATI (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod); +GLAPI void APIENTRY glAlphaFragmentOp1ATI (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod); +GLAPI void APIENTRY glAlphaFragmentOp2ATI (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod); +GLAPI void APIENTRY glAlphaFragmentOp3ATI (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod); +GLAPI void APIENTRY glSetFragmentShaderConstantATI (GLuint dst, const GLfloat *value); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLuint (APIENTRYP PFNGLGENFRAGMENTSHADERSATIPROC) (GLuint range); +typedef void (APIENTRYP PFNGLBINDFRAGMENTSHADERATIPROC) (GLuint id); +typedef void (APIENTRYP PFNGLDELETEFRAGMENTSHADERATIPROC) (GLuint id); +typedef void (APIENTRYP PFNGLBEGINFRAGMENTSHADERATIPROC) (void); +typedef void (APIENTRYP PFNGLENDFRAGMENTSHADERATIPROC) (void); +typedef void (APIENTRYP PFNGLPASSTEXCOORDATIPROC) (GLuint dst, GLuint coord, GLenum swizzle); +typedef void (APIENTRYP PFNGLSAMPLEMAPATIPROC) (GLuint dst, GLuint interp, GLenum swizzle); +typedef void (APIENTRYP PFNGLCOLORFRAGMENTOP1ATIPROC) (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod); +typedef void (APIENTRYP PFNGLCOLORFRAGMENTOP2ATIPROC) (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod); +typedef void (APIENTRYP PFNGLCOLORFRAGMENTOP3ATIPROC) (GLenum op, GLuint dst, GLuint dstMask, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod); +typedef void (APIENTRYP PFNGLALPHAFRAGMENTOP1ATIPROC) (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod); +typedef void (APIENTRYP PFNGLALPHAFRAGMENTOP2ATIPROC) (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod); +typedef void (APIENTRYP PFNGLALPHAFRAGMENTOP3ATIPROC) (GLenum op, GLuint dst, GLuint dstMod, GLuint arg1, GLuint arg1Rep, GLuint arg1Mod, GLuint arg2, GLuint arg2Rep, GLuint arg2Mod, GLuint arg3, GLuint arg3Rep, GLuint arg3Mod); +typedef void (APIENTRYP PFNGLSETFRAGMENTSHADERCONSTANTATIPROC) (GLuint dst, const GLfloat *value); +#endif + +#ifndef GL_ATI_pn_triangles +#define GL_ATI_pn_triangles 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPNTrianglesiATI (GLenum pname, GLint param); +GLAPI void APIENTRY glPNTrianglesfATI (GLenum pname, GLfloat param); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPNTRIANGLESIATIPROC) (GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLPNTRIANGLESFATIPROC) (GLenum pname, GLfloat param); +#endif + +#ifndef GL_ATI_vertex_array_object +#define GL_ATI_vertex_array_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLuint APIENTRY glNewObjectBufferATI (GLsizei size, const GLvoid *pointer, GLenum usage); +GLAPI GLboolean APIENTRY glIsObjectBufferATI (GLuint buffer); +GLAPI void APIENTRY glUpdateObjectBufferATI (GLuint buffer, GLuint offset, GLsizei size, const GLvoid *pointer, GLenum preserve); +GLAPI void APIENTRY glGetObjectBufferfvATI (GLuint buffer, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetObjectBufferivATI (GLuint buffer, GLenum pname, GLint *params); +GLAPI void APIENTRY glFreeObjectBufferATI (GLuint buffer); +GLAPI void APIENTRY glArrayObjectATI (GLenum array, GLint size, GLenum type, GLsizei stride, GLuint buffer, GLuint offset); +GLAPI void APIENTRY glGetArrayObjectfvATI (GLenum array, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetArrayObjectivATI (GLenum array, GLenum pname, GLint *params); +GLAPI void APIENTRY glVariantArrayObjectATI (GLuint id, GLenum type, GLsizei stride, GLuint buffer, GLuint offset); +GLAPI void APIENTRY glGetVariantArrayObjectfvATI (GLuint id, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetVariantArrayObjectivATI (GLuint id, GLenum pname, GLint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLuint (APIENTRYP PFNGLNEWOBJECTBUFFERATIPROC) (GLsizei size, const GLvoid *pointer, GLenum usage); +typedef GLboolean (APIENTRYP PFNGLISOBJECTBUFFERATIPROC) (GLuint buffer); +typedef void (APIENTRYP PFNGLUPDATEOBJECTBUFFERATIPROC) (GLuint buffer, GLuint offset, GLsizei size, const GLvoid *pointer, GLenum preserve); +typedef void (APIENTRYP PFNGLGETOBJECTBUFFERFVATIPROC) (GLuint buffer, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETOBJECTBUFFERIVATIPROC) (GLuint buffer, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLFREEOBJECTBUFFERATIPROC) (GLuint buffer); +typedef void (APIENTRYP PFNGLARRAYOBJECTATIPROC) (GLenum array, GLint size, GLenum type, GLsizei stride, GLuint buffer, GLuint offset); +typedef void (APIENTRYP PFNGLGETARRAYOBJECTFVATIPROC) (GLenum array, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETARRAYOBJECTIVATIPROC) (GLenum array, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLVARIANTARRAYOBJECTATIPROC) (GLuint id, GLenum type, GLsizei stride, GLuint buffer, GLuint offset); +typedef void (APIENTRYP PFNGLGETVARIANTARRAYOBJECTFVATIPROC) (GLuint id, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETVARIANTARRAYOBJECTIVATIPROC) (GLuint id, GLenum pname, GLint *params); +#endif + +#ifndef GL_EXT_vertex_shader +#define GL_EXT_vertex_shader 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBeginVertexShaderEXT (void); +GLAPI void APIENTRY glEndVertexShaderEXT (void); +GLAPI void APIENTRY glBindVertexShaderEXT (GLuint id); +GLAPI GLuint APIENTRY glGenVertexShadersEXT (GLuint range); +GLAPI void APIENTRY glDeleteVertexShaderEXT (GLuint id); +GLAPI void APIENTRY glShaderOp1EXT (GLenum op, GLuint res, GLuint arg1); +GLAPI void APIENTRY glShaderOp2EXT (GLenum op, GLuint res, GLuint arg1, GLuint arg2); +GLAPI void APIENTRY glShaderOp3EXT (GLenum op, GLuint res, GLuint arg1, GLuint arg2, GLuint arg3); +GLAPI void APIENTRY glSwizzleEXT (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW); +GLAPI void APIENTRY glWriteMaskEXT (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW); +GLAPI void APIENTRY glInsertComponentEXT (GLuint res, GLuint src, GLuint num); +GLAPI void APIENTRY glExtractComponentEXT (GLuint res, GLuint src, GLuint num); +GLAPI GLuint APIENTRY glGenSymbolsEXT (GLenum datatype, GLenum storagetype, GLenum range, GLuint components); +GLAPI void APIENTRY glSetInvariantEXT (GLuint id, GLenum type, const GLvoid *addr); +GLAPI void APIENTRY glSetLocalConstantEXT (GLuint id, GLenum type, const GLvoid *addr); +GLAPI void APIENTRY glVariantbvEXT (GLuint id, const GLbyte *addr); +GLAPI void APIENTRY glVariantsvEXT (GLuint id, const GLshort *addr); +GLAPI void APIENTRY glVariantivEXT (GLuint id, const GLint *addr); +GLAPI void APIENTRY glVariantfvEXT (GLuint id, const GLfloat *addr); +GLAPI void APIENTRY glVariantdvEXT (GLuint id, const GLdouble *addr); +GLAPI void APIENTRY glVariantubvEXT (GLuint id, const GLubyte *addr); +GLAPI void APIENTRY glVariantusvEXT (GLuint id, const GLushort *addr); +GLAPI void APIENTRY glVariantuivEXT (GLuint id, const GLuint *addr); +GLAPI void APIENTRY glVariantPointerEXT (GLuint id, GLenum type, GLuint stride, const GLvoid *addr); +GLAPI void APIENTRY glEnableVariantClientStateEXT (GLuint id); +GLAPI void APIENTRY glDisableVariantClientStateEXT (GLuint id); +GLAPI GLuint APIENTRY glBindLightParameterEXT (GLenum light, GLenum value); +GLAPI GLuint APIENTRY glBindMaterialParameterEXT (GLenum face, GLenum value); +GLAPI GLuint APIENTRY glBindTexGenParameterEXT (GLenum unit, GLenum coord, GLenum value); +GLAPI GLuint APIENTRY glBindTextureUnitParameterEXT (GLenum unit, GLenum value); +GLAPI GLuint APIENTRY glBindParameterEXT (GLenum value); +GLAPI GLboolean APIENTRY glIsVariantEnabledEXT (GLuint id, GLenum cap); +GLAPI void APIENTRY glGetVariantBooleanvEXT (GLuint id, GLenum value, GLboolean *data); +GLAPI void APIENTRY glGetVariantIntegervEXT (GLuint id, GLenum value, GLint *data); +GLAPI void APIENTRY glGetVariantFloatvEXT (GLuint id, GLenum value, GLfloat *data); +GLAPI void APIENTRY glGetVariantPointervEXT (GLuint id, GLenum value, GLvoid* *data); +GLAPI void APIENTRY glGetInvariantBooleanvEXT (GLuint id, GLenum value, GLboolean *data); +GLAPI void APIENTRY glGetInvariantIntegervEXT (GLuint id, GLenum value, GLint *data); +GLAPI void APIENTRY glGetInvariantFloatvEXT (GLuint id, GLenum value, GLfloat *data); +GLAPI void APIENTRY glGetLocalConstantBooleanvEXT (GLuint id, GLenum value, GLboolean *data); +GLAPI void APIENTRY glGetLocalConstantIntegervEXT (GLuint id, GLenum value, GLint *data); +GLAPI void APIENTRY glGetLocalConstantFloatvEXT (GLuint id, GLenum value, GLfloat *data); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBEGINVERTEXSHADEREXTPROC) (void); +typedef void (APIENTRYP PFNGLENDVERTEXSHADEREXTPROC) (void); +typedef void (APIENTRYP PFNGLBINDVERTEXSHADEREXTPROC) (GLuint id); +typedef GLuint (APIENTRYP PFNGLGENVERTEXSHADERSEXTPROC) (GLuint range); +typedef void (APIENTRYP PFNGLDELETEVERTEXSHADEREXTPROC) (GLuint id); +typedef void (APIENTRYP PFNGLSHADEROP1EXTPROC) (GLenum op, GLuint res, GLuint arg1); +typedef void (APIENTRYP PFNGLSHADEROP2EXTPROC) (GLenum op, GLuint res, GLuint arg1, GLuint arg2); +typedef void (APIENTRYP PFNGLSHADEROP3EXTPROC) (GLenum op, GLuint res, GLuint arg1, GLuint arg2, GLuint arg3); +typedef void (APIENTRYP PFNGLSWIZZLEEXTPROC) (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW); +typedef void (APIENTRYP PFNGLWRITEMASKEXTPROC) (GLuint res, GLuint in, GLenum outX, GLenum outY, GLenum outZ, GLenum outW); +typedef void (APIENTRYP PFNGLINSERTCOMPONENTEXTPROC) (GLuint res, GLuint src, GLuint num); +typedef void (APIENTRYP PFNGLEXTRACTCOMPONENTEXTPROC) (GLuint res, GLuint src, GLuint num); +typedef GLuint (APIENTRYP PFNGLGENSYMBOLSEXTPROC) (GLenum datatype, GLenum storagetype, GLenum range, GLuint components); +typedef void (APIENTRYP PFNGLSETINVARIANTEXTPROC) (GLuint id, GLenum type, const GLvoid *addr); +typedef void (APIENTRYP PFNGLSETLOCALCONSTANTEXTPROC) (GLuint id, GLenum type, const GLvoid *addr); +typedef void (APIENTRYP PFNGLVARIANTBVEXTPROC) (GLuint id, const GLbyte *addr); +typedef void (APIENTRYP PFNGLVARIANTSVEXTPROC) (GLuint id, const GLshort *addr); +typedef void (APIENTRYP PFNGLVARIANTIVEXTPROC) (GLuint id, const GLint *addr); +typedef void (APIENTRYP PFNGLVARIANTFVEXTPROC) (GLuint id, const GLfloat *addr); +typedef void (APIENTRYP PFNGLVARIANTDVEXTPROC) (GLuint id, const GLdouble *addr); +typedef void (APIENTRYP PFNGLVARIANTUBVEXTPROC) (GLuint id, const GLubyte *addr); +typedef void (APIENTRYP PFNGLVARIANTUSVEXTPROC) (GLuint id, const GLushort *addr); +typedef void (APIENTRYP PFNGLVARIANTUIVEXTPROC) (GLuint id, const GLuint *addr); +typedef void (APIENTRYP PFNGLVARIANTPOINTEREXTPROC) (GLuint id, GLenum type, GLuint stride, const GLvoid *addr); +typedef void (APIENTRYP PFNGLENABLEVARIANTCLIENTSTATEEXTPROC) (GLuint id); +typedef void (APIENTRYP PFNGLDISABLEVARIANTCLIENTSTATEEXTPROC) (GLuint id); +typedef GLuint (APIENTRYP PFNGLBINDLIGHTPARAMETEREXTPROC) (GLenum light, GLenum value); +typedef GLuint (APIENTRYP PFNGLBINDMATERIALPARAMETEREXTPROC) (GLenum face, GLenum value); +typedef GLuint (APIENTRYP PFNGLBINDTEXGENPARAMETEREXTPROC) (GLenum unit, GLenum coord, GLenum value); +typedef GLuint (APIENTRYP PFNGLBINDTEXTUREUNITPARAMETEREXTPROC) (GLenum unit, GLenum value); +typedef GLuint (APIENTRYP PFNGLBINDPARAMETEREXTPROC) (GLenum value); +typedef GLboolean (APIENTRYP PFNGLISVARIANTENABLEDEXTPROC) (GLuint id, GLenum cap); +typedef void (APIENTRYP PFNGLGETVARIANTBOOLEANVEXTPROC) (GLuint id, GLenum value, GLboolean *data); +typedef void (APIENTRYP PFNGLGETVARIANTINTEGERVEXTPROC) (GLuint id, GLenum value, GLint *data); +typedef void (APIENTRYP PFNGLGETVARIANTFLOATVEXTPROC) (GLuint id, GLenum value, GLfloat *data); +typedef void (APIENTRYP PFNGLGETVARIANTPOINTERVEXTPROC) (GLuint id, GLenum value, GLvoid* *data); +typedef void (APIENTRYP PFNGLGETINVARIANTBOOLEANVEXTPROC) (GLuint id, GLenum value, GLboolean *data); +typedef void (APIENTRYP PFNGLGETINVARIANTINTEGERVEXTPROC) (GLuint id, GLenum value, GLint *data); +typedef void (APIENTRYP PFNGLGETINVARIANTFLOATVEXTPROC) (GLuint id, GLenum value, GLfloat *data); +typedef void (APIENTRYP PFNGLGETLOCALCONSTANTBOOLEANVEXTPROC) (GLuint id, GLenum value, GLboolean *data); +typedef void (APIENTRYP PFNGLGETLOCALCONSTANTINTEGERVEXTPROC) (GLuint id, GLenum value, GLint *data); +typedef void (APIENTRYP PFNGLGETLOCALCONSTANTFLOATVEXTPROC) (GLuint id, GLenum value, GLfloat *data); +#endif + +#ifndef GL_ATI_vertex_streams +#define GL_ATI_vertex_streams 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexStream1sATI (GLenum stream, GLshort x); +GLAPI void APIENTRY glVertexStream1svATI (GLenum stream, const GLshort *coords); +GLAPI void APIENTRY glVertexStream1iATI (GLenum stream, GLint x); +GLAPI void APIENTRY glVertexStream1ivATI (GLenum stream, const GLint *coords); +GLAPI void APIENTRY glVertexStream1fATI (GLenum stream, GLfloat x); +GLAPI void APIENTRY glVertexStream1fvATI (GLenum stream, const GLfloat *coords); +GLAPI void APIENTRY glVertexStream1dATI (GLenum stream, GLdouble x); +GLAPI void APIENTRY glVertexStream1dvATI (GLenum stream, const GLdouble *coords); +GLAPI void APIENTRY glVertexStream2sATI (GLenum stream, GLshort x, GLshort y); +GLAPI void APIENTRY glVertexStream2svATI (GLenum stream, const GLshort *coords); +GLAPI void APIENTRY glVertexStream2iATI (GLenum stream, GLint x, GLint y); +GLAPI void APIENTRY glVertexStream2ivATI (GLenum stream, const GLint *coords); +GLAPI void APIENTRY glVertexStream2fATI (GLenum stream, GLfloat x, GLfloat y); +GLAPI void APIENTRY glVertexStream2fvATI (GLenum stream, const GLfloat *coords); +GLAPI void APIENTRY glVertexStream2dATI (GLenum stream, GLdouble x, GLdouble y); +GLAPI void APIENTRY glVertexStream2dvATI (GLenum stream, const GLdouble *coords); +GLAPI void APIENTRY glVertexStream3sATI (GLenum stream, GLshort x, GLshort y, GLshort z); +GLAPI void APIENTRY glVertexStream3svATI (GLenum stream, const GLshort *coords); +GLAPI void APIENTRY glVertexStream3iATI (GLenum stream, GLint x, GLint y, GLint z); +GLAPI void APIENTRY glVertexStream3ivATI (GLenum stream, const GLint *coords); +GLAPI void APIENTRY glVertexStream3fATI (GLenum stream, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glVertexStream3fvATI (GLenum stream, const GLfloat *coords); +GLAPI void APIENTRY glVertexStream3dATI (GLenum stream, GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glVertexStream3dvATI (GLenum stream, const GLdouble *coords); +GLAPI void APIENTRY glVertexStream4sATI (GLenum stream, GLshort x, GLshort y, GLshort z, GLshort w); +GLAPI void APIENTRY glVertexStream4svATI (GLenum stream, const GLshort *coords); +GLAPI void APIENTRY glVertexStream4iATI (GLenum stream, GLint x, GLint y, GLint z, GLint w); +GLAPI void APIENTRY glVertexStream4ivATI (GLenum stream, const GLint *coords); +GLAPI void APIENTRY glVertexStream4fATI (GLenum stream, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glVertexStream4fvATI (GLenum stream, const GLfloat *coords); +GLAPI void APIENTRY glVertexStream4dATI (GLenum stream, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glVertexStream4dvATI (GLenum stream, const GLdouble *coords); +GLAPI void APIENTRY glNormalStream3bATI (GLenum stream, GLbyte nx, GLbyte ny, GLbyte nz); +GLAPI void APIENTRY glNormalStream3bvATI (GLenum stream, const GLbyte *coords); +GLAPI void APIENTRY glNormalStream3sATI (GLenum stream, GLshort nx, GLshort ny, GLshort nz); +GLAPI void APIENTRY glNormalStream3svATI (GLenum stream, const GLshort *coords); +GLAPI void APIENTRY glNormalStream3iATI (GLenum stream, GLint nx, GLint ny, GLint nz); +GLAPI void APIENTRY glNormalStream3ivATI (GLenum stream, const GLint *coords); +GLAPI void APIENTRY glNormalStream3fATI (GLenum stream, GLfloat nx, GLfloat ny, GLfloat nz); +GLAPI void APIENTRY glNormalStream3fvATI (GLenum stream, const GLfloat *coords); +GLAPI void APIENTRY glNormalStream3dATI (GLenum stream, GLdouble nx, GLdouble ny, GLdouble nz); +GLAPI void APIENTRY glNormalStream3dvATI (GLenum stream, const GLdouble *coords); +GLAPI void APIENTRY glClientActiveVertexStreamATI (GLenum stream); +GLAPI void APIENTRY glVertexBlendEnviATI (GLenum pname, GLint param); +GLAPI void APIENTRY glVertexBlendEnvfATI (GLenum pname, GLfloat param); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXSTREAM1SATIPROC) (GLenum stream, GLshort x); +typedef void (APIENTRYP PFNGLVERTEXSTREAM1SVATIPROC) (GLenum stream, const GLshort *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM1IATIPROC) (GLenum stream, GLint x); +typedef void (APIENTRYP PFNGLVERTEXSTREAM1IVATIPROC) (GLenum stream, const GLint *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM1FATIPROC) (GLenum stream, GLfloat x); +typedef void (APIENTRYP PFNGLVERTEXSTREAM1FVATIPROC) (GLenum stream, const GLfloat *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM1DATIPROC) (GLenum stream, GLdouble x); +typedef void (APIENTRYP PFNGLVERTEXSTREAM1DVATIPROC) (GLenum stream, const GLdouble *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM2SATIPROC) (GLenum stream, GLshort x, GLshort y); +typedef void (APIENTRYP PFNGLVERTEXSTREAM2SVATIPROC) (GLenum stream, const GLshort *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM2IATIPROC) (GLenum stream, GLint x, GLint y); +typedef void (APIENTRYP PFNGLVERTEXSTREAM2IVATIPROC) (GLenum stream, const GLint *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM2FATIPROC) (GLenum stream, GLfloat x, GLfloat y); +typedef void (APIENTRYP PFNGLVERTEXSTREAM2FVATIPROC) (GLenum stream, const GLfloat *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM2DATIPROC) (GLenum stream, GLdouble x, GLdouble y); +typedef void (APIENTRYP PFNGLVERTEXSTREAM2DVATIPROC) (GLenum stream, const GLdouble *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM3SATIPROC) (GLenum stream, GLshort x, GLshort y, GLshort z); +typedef void (APIENTRYP PFNGLVERTEXSTREAM3SVATIPROC) (GLenum stream, const GLshort *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM3IATIPROC) (GLenum stream, GLint x, GLint y, GLint z); +typedef void (APIENTRYP PFNGLVERTEXSTREAM3IVATIPROC) (GLenum stream, const GLint *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM3FATIPROC) (GLenum stream, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLVERTEXSTREAM3FVATIPROC) (GLenum stream, const GLfloat *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM3DATIPROC) (GLenum stream, GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLVERTEXSTREAM3DVATIPROC) (GLenum stream, const GLdouble *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM4SATIPROC) (GLenum stream, GLshort x, GLshort y, GLshort z, GLshort w); +typedef void (APIENTRYP PFNGLVERTEXSTREAM4SVATIPROC) (GLenum stream, const GLshort *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM4IATIPROC) (GLenum stream, GLint x, GLint y, GLint z, GLint w); +typedef void (APIENTRYP PFNGLVERTEXSTREAM4IVATIPROC) (GLenum stream, const GLint *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM4FATIPROC) (GLenum stream, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLVERTEXSTREAM4FVATIPROC) (GLenum stream, const GLfloat *coords); +typedef void (APIENTRYP PFNGLVERTEXSTREAM4DATIPROC) (GLenum stream, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLVERTEXSTREAM4DVATIPROC) (GLenum stream, const GLdouble *coords); +typedef void (APIENTRYP PFNGLNORMALSTREAM3BATIPROC) (GLenum stream, GLbyte nx, GLbyte ny, GLbyte nz); +typedef void (APIENTRYP PFNGLNORMALSTREAM3BVATIPROC) (GLenum stream, const GLbyte *coords); +typedef void (APIENTRYP PFNGLNORMALSTREAM3SATIPROC) (GLenum stream, GLshort nx, GLshort ny, GLshort nz); +typedef void (APIENTRYP PFNGLNORMALSTREAM3SVATIPROC) (GLenum stream, const GLshort *coords); +typedef void (APIENTRYP PFNGLNORMALSTREAM3IATIPROC) (GLenum stream, GLint nx, GLint ny, GLint nz); +typedef void (APIENTRYP PFNGLNORMALSTREAM3IVATIPROC) (GLenum stream, const GLint *coords); +typedef void (APIENTRYP PFNGLNORMALSTREAM3FATIPROC) (GLenum stream, GLfloat nx, GLfloat ny, GLfloat nz); +typedef void (APIENTRYP PFNGLNORMALSTREAM3FVATIPROC) (GLenum stream, const GLfloat *coords); +typedef void (APIENTRYP PFNGLNORMALSTREAM3DATIPROC) (GLenum stream, GLdouble nx, GLdouble ny, GLdouble nz); +typedef void (APIENTRYP PFNGLNORMALSTREAM3DVATIPROC) (GLenum stream, const GLdouble *coords); +typedef void (APIENTRYP PFNGLCLIENTACTIVEVERTEXSTREAMATIPROC) (GLenum stream); +typedef void (APIENTRYP PFNGLVERTEXBLENDENVIATIPROC) (GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLVERTEXBLENDENVFATIPROC) (GLenum pname, GLfloat param); +#endif + +#ifndef GL_ATI_element_array +#define GL_ATI_element_array 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glElementPointerATI (GLenum type, const GLvoid *pointer); +GLAPI void APIENTRY glDrawElementArrayATI (GLenum mode, GLsizei count); +GLAPI void APIENTRY glDrawRangeElementArrayATI (GLenum mode, GLuint start, GLuint end, GLsizei count); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLELEMENTPOINTERATIPROC) (GLenum type, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLDRAWELEMENTARRAYATIPROC) (GLenum mode, GLsizei count); +typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTARRAYATIPROC) (GLenum mode, GLuint start, GLuint end, GLsizei count); +#endif + +#ifndef GL_SUN_mesh_array +#define GL_SUN_mesh_array 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDrawMeshArraysSUN (GLenum mode, GLint first, GLsizei count, GLsizei width); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDRAWMESHARRAYSSUNPROC) (GLenum mode, GLint first, GLsizei count, GLsizei width); +#endif + +#ifndef GL_SUN_slice_accum +#define GL_SUN_slice_accum 1 +#endif + +#ifndef GL_NV_multisample_filter_hint +#define GL_NV_multisample_filter_hint 1 +#endif + +#ifndef GL_NV_depth_clamp +#define GL_NV_depth_clamp 1 +#endif + +#ifndef GL_NV_occlusion_query +#define GL_NV_occlusion_query 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGenOcclusionQueriesNV (GLsizei n, GLuint *ids); +GLAPI void APIENTRY glDeleteOcclusionQueriesNV (GLsizei n, const GLuint *ids); +GLAPI GLboolean APIENTRY glIsOcclusionQueryNV (GLuint id); +GLAPI void APIENTRY glBeginOcclusionQueryNV (GLuint id); +GLAPI void APIENTRY glEndOcclusionQueryNV (void); +GLAPI void APIENTRY glGetOcclusionQueryivNV (GLuint id, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetOcclusionQueryuivNV (GLuint id, GLenum pname, GLuint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGENOCCLUSIONQUERIESNVPROC) (GLsizei n, GLuint *ids); +typedef void (APIENTRYP PFNGLDELETEOCCLUSIONQUERIESNVPROC) (GLsizei n, const GLuint *ids); +typedef GLboolean (APIENTRYP PFNGLISOCCLUSIONQUERYNVPROC) (GLuint id); +typedef void (APIENTRYP PFNGLBEGINOCCLUSIONQUERYNVPROC) (GLuint id); +typedef void (APIENTRYP PFNGLENDOCCLUSIONQUERYNVPROC) (void); +typedef void (APIENTRYP PFNGLGETOCCLUSIONQUERYIVNVPROC) (GLuint id, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETOCCLUSIONQUERYUIVNVPROC) (GLuint id, GLenum pname, GLuint *params); +#endif + +#ifndef GL_NV_point_sprite +#define GL_NV_point_sprite 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPointParameteriNV (GLenum pname, GLint param); +GLAPI void APIENTRY glPointParameterivNV (GLenum pname, const GLint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPOINTPARAMETERINVPROC) (GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLPOINTPARAMETERIVNVPROC) (GLenum pname, const GLint *params); +#endif + +#ifndef GL_NV_texture_shader3 +#define GL_NV_texture_shader3 1 +#endif + +#ifndef GL_NV_vertex_program1_1 +#define GL_NV_vertex_program1_1 1 +#endif + +#ifndef GL_EXT_shadow_funcs +#define GL_EXT_shadow_funcs 1 +#endif + +#ifndef GL_EXT_stencil_two_side +#define GL_EXT_stencil_two_side 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glActiveStencilFaceEXT (GLenum face); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLACTIVESTENCILFACEEXTPROC) (GLenum face); +#endif + +#ifndef GL_ATI_text_fragment_shader +#define GL_ATI_text_fragment_shader 1 +#endif + +#ifndef GL_APPLE_client_storage +#define GL_APPLE_client_storage 1 +#endif + +#ifndef GL_APPLE_element_array +#define GL_APPLE_element_array 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glElementPointerAPPLE (GLenum type, const GLvoid *pointer); +GLAPI void APIENTRY glDrawElementArrayAPPLE (GLenum mode, GLint first, GLsizei count); +GLAPI void APIENTRY glDrawRangeElementArrayAPPLE (GLenum mode, GLuint start, GLuint end, GLint first, GLsizei count); +GLAPI void APIENTRY glMultiDrawElementArrayAPPLE (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount); +GLAPI void APIENTRY glMultiDrawRangeElementArrayAPPLE (GLenum mode, GLuint start, GLuint end, const GLint *first, const GLsizei *count, GLsizei primcount); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLELEMENTPOINTERAPPLEPROC) (GLenum type, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLDRAWELEMENTARRAYAPPLEPROC) (GLenum mode, GLint first, GLsizei count); +typedef void (APIENTRYP PFNGLDRAWRANGEELEMENTARRAYAPPLEPROC) (GLenum mode, GLuint start, GLuint end, GLint first, GLsizei count); +typedef void (APIENTRYP PFNGLMULTIDRAWELEMENTARRAYAPPLEPROC) (GLenum mode, const GLint *first, const GLsizei *count, GLsizei primcount); +typedef void (APIENTRYP PFNGLMULTIDRAWRANGEELEMENTARRAYAPPLEPROC) (GLenum mode, GLuint start, GLuint end, const GLint *first, const GLsizei *count, GLsizei primcount); +#endif + +#ifndef GL_APPLE_fence +#define GL_APPLE_fence 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGenFencesAPPLE (GLsizei n, GLuint *fences); +GLAPI void APIENTRY glDeleteFencesAPPLE (GLsizei n, const GLuint *fences); +GLAPI void APIENTRY glSetFenceAPPLE (GLuint fence); +GLAPI GLboolean APIENTRY glIsFenceAPPLE (GLuint fence); +GLAPI GLboolean APIENTRY glTestFenceAPPLE (GLuint fence); +GLAPI void APIENTRY glFinishFenceAPPLE (GLuint fence); +GLAPI GLboolean APIENTRY glTestObjectAPPLE (GLenum object, GLuint name); +GLAPI void APIENTRY glFinishObjectAPPLE (GLenum object, GLint name); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGENFENCESAPPLEPROC) (GLsizei n, GLuint *fences); +typedef void (APIENTRYP PFNGLDELETEFENCESAPPLEPROC) (GLsizei n, const GLuint *fences); +typedef void (APIENTRYP PFNGLSETFENCEAPPLEPROC) (GLuint fence); +typedef GLboolean (APIENTRYP PFNGLISFENCEAPPLEPROC) (GLuint fence); +typedef GLboolean (APIENTRYP PFNGLTESTFENCEAPPLEPROC) (GLuint fence); +typedef void (APIENTRYP PFNGLFINISHFENCEAPPLEPROC) (GLuint fence); +typedef GLboolean (APIENTRYP PFNGLTESTOBJECTAPPLEPROC) (GLenum object, GLuint name); +typedef void (APIENTRYP PFNGLFINISHOBJECTAPPLEPROC) (GLenum object, GLint name); +#endif + +#ifndef GL_APPLE_vertex_array_object +#define GL_APPLE_vertex_array_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBindVertexArrayAPPLE (GLuint array); +GLAPI void APIENTRY glDeleteVertexArraysAPPLE (GLsizei n, const GLuint *arrays); +GLAPI void APIENTRY glGenVertexArraysAPPLE (GLsizei n, GLuint *arrays); +GLAPI GLboolean APIENTRY glIsVertexArrayAPPLE (GLuint array); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBINDVERTEXARRAYAPPLEPROC) (GLuint array); +typedef void (APIENTRYP PFNGLDELETEVERTEXARRAYSAPPLEPROC) (GLsizei n, const GLuint *arrays); +typedef void (APIENTRYP PFNGLGENVERTEXARRAYSAPPLEPROC) (GLsizei n, GLuint *arrays); +typedef GLboolean (APIENTRYP PFNGLISVERTEXARRAYAPPLEPROC) (GLuint array); +#endif + +#ifndef GL_APPLE_vertex_array_range +#define GL_APPLE_vertex_array_range 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexArrayRangeAPPLE (GLsizei length, GLvoid *pointer); +GLAPI void APIENTRY glFlushVertexArrayRangeAPPLE (GLsizei length, GLvoid *pointer); +GLAPI void APIENTRY glVertexArrayParameteriAPPLE (GLenum pname, GLint param); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXARRAYRANGEAPPLEPROC) (GLsizei length, GLvoid *pointer); +typedef void (APIENTRYP PFNGLFLUSHVERTEXARRAYRANGEAPPLEPROC) (GLsizei length, GLvoid *pointer); +typedef void (APIENTRYP PFNGLVERTEXARRAYPARAMETERIAPPLEPROC) (GLenum pname, GLint param); +#endif + +#ifndef GL_APPLE_ycbcr_422 +#define GL_APPLE_ycbcr_422 1 +#endif + +#ifndef GL_S3_s3tc +#define GL_S3_s3tc 1 +#endif + +#ifndef GL_ATI_draw_buffers +#define GL_ATI_draw_buffers 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDrawBuffersATI (GLsizei n, const GLenum *bufs); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDRAWBUFFERSATIPROC) (GLsizei n, const GLenum *bufs); +#endif + +#ifndef GL_ATI_pixel_format_float +#define GL_ATI_pixel_format_float 1 +/* This is really a WGL extension, but defines some associated GL enums. + * ATI does not export "GL_ATI_pixel_format_float" in the GL_EXTENSIONS string. + */ +#endif + +#ifndef GL_ATI_texture_env_combine3 +#define GL_ATI_texture_env_combine3 1 +#endif + +#ifndef GL_ATI_texture_float +#define GL_ATI_texture_float 1 +#endif + +#ifndef GL_NV_float_buffer +#define GL_NV_float_buffer 1 +#endif + +#ifndef GL_NV_fragment_program +#define GL_NV_fragment_program 1 +/* Some NV_fragment_program entry points are shared with ARB_vertex_program. */ +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glProgramNamedParameter4fNV (GLuint id, GLsizei len, const GLubyte *name, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glProgramNamedParameter4dNV (GLuint id, GLsizei len, const GLubyte *name, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glProgramNamedParameter4fvNV (GLuint id, GLsizei len, const GLubyte *name, const GLfloat *v); +GLAPI void APIENTRY glProgramNamedParameter4dvNV (GLuint id, GLsizei len, const GLubyte *name, const GLdouble *v); +GLAPI void APIENTRY glGetProgramNamedParameterfvNV (GLuint id, GLsizei len, const GLubyte *name, GLfloat *params); +GLAPI void APIENTRY glGetProgramNamedParameterdvNV (GLuint id, GLsizei len, const GLubyte *name, GLdouble *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4FNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4DNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4FVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, const GLfloat *v); +typedef void (APIENTRYP PFNGLPROGRAMNAMEDPARAMETER4DVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, const GLdouble *v); +typedef void (APIENTRYP PFNGLGETPROGRAMNAMEDPARAMETERFVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLfloat *params); +typedef void (APIENTRYP PFNGLGETPROGRAMNAMEDPARAMETERDVNVPROC) (GLuint id, GLsizei len, const GLubyte *name, GLdouble *params); +#endif + +#ifndef GL_NV_half_float +#define GL_NV_half_float 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertex2hNV (GLhalfNV x, GLhalfNV y); +GLAPI void APIENTRY glVertex2hvNV (const GLhalfNV *v); +GLAPI void APIENTRY glVertex3hNV (GLhalfNV x, GLhalfNV y, GLhalfNV z); +GLAPI void APIENTRY glVertex3hvNV (const GLhalfNV *v); +GLAPI void APIENTRY glVertex4hNV (GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w); +GLAPI void APIENTRY glVertex4hvNV (const GLhalfNV *v); +GLAPI void APIENTRY glNormal3hNV (GLhalfNV nx, GLhalfNV ny, GLhalfNV nz); +GLAPI void APIENTRY glNormal3hvNV (const GLhalfNV *v); +GLAPI void APIENTRY glColor3hNV (GLhalfNV red, GLhalfNV green, GLhalfNV blue); +GLAPI void APIENTRY glColor3hvNV (const GLhalfNV *v); +GLAPI void APIENTRY glColor4hNV (GLhalfNV red, GLhalfNV green, GLhalfNV blue, GLhalfNV alpha); +GLAPI void APIENTRY glColor4hvNV (const GLhalfNV *v); +GLAPI void APIENTRY glTexCoord1hNV (GLhalfNV s); +GLAPI void APIENTRY glTexCoord1hvNV (const GLhalfNV *v); +GLAPI void APIENTRY glTexCoord2hNV (GLhalfNV s, GLhalfNV t); +GLAPI void APIENTRY glTexCoord2hvNV (const GLhalfNV *v); +GLAPI void APIENTRY glTexCoord3hNV (GLhalfNV s, GLhalfNV t, GLhalfNV r); +GLAPI void APIENTRY glTexCoord3hvNV (const GLhalfNV *v); +GLAPI void APIENTRY glTexCoord4hNV (GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q); +GLAPI void APIENTRY glTexCoord4hvNV (const GLhalfNV *v); +GLAPI void APIENTRY glMultiTexCoord1hNV (GLenum target, GLhalfNV s); +GLAPI void APIENTRY glMultiTexCoord1hvNV (GLenum target, const GLhalfNV *v); +GLAPI void APIENTRY glMultiTexCoord2hNV (GLenum target, GLhalfNV s, GLhalfNV t); +GLAPI void APIENTRY glMultiTexCoord2hvNV (GLenum target, const GLhalfNV *v); +GLAPI void APIENTRY glMultiTexCoord3hNV (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r); +GLAPI void APIENTRY glMultiTexCoord3hvNV (GLenum target, const GLhalfNV *v); +GLAPI void APIENTRY glMultiTexCoord4hNV (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q); +GLAPI void APIENTRY glMultiTexCoord4hvNV (GLenum target, const GLhalfNV *v); +GLAPI void APIENTRY glFogCoordhNV (GLhalfNV fog); +GLAPI void APIENTRY glFogCoordhvNV (const GLhalfNV *fog); +GLAPI void APIENTRY glSecondaryColor3hNV (GLhalfNV red, GLhalfNV green, GLhalfNV blue); +GLAPI void APIENTRY glSecondaryColor3hvNV (const GLhalfNV *v); +GLAPI void APIENTRY glVertexWeighthNV (GLhalfNV weight); +GLAPI void APIENTRY glVertexWeighthvNV (const GLhalfNV *weight); +GLAPI void APIENTRY glVertexAttrib1hNV (GLuint index, GLhalfNV x); +GLAPI void APIENTRY glVertexAttrib1hvNV (GLuint index, const GLhalfNV *v); +GLAPI void APIENTRY glVertexAttrib2hNV (GLuint index, GLhalfNV x, GLhalfNV y); +GLAPI void APIENTRY glVertexAttrib2hvNV (GLuint index, const GLhalfNV *v); +GLAPI void APIENTRY glVertexAttrib3hNV (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z); +GLAPI void APIENTRY glVertexAttrib3hvNV (GLuint index, const GLhalfNV *v); +GLAPI void APIENTRY glVertexAttrib4hNV (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w); +GLAPI void APIENTRY glVertexAttrib4hvNV (GLuint index, const GLhalfNV *v); +GLAPI void APIENTRY glVertexAttribs1hvNV (GLuint index, GLsizei n, const GLhalfNV *v); +GLAPI void APIENTRY glVertexAttribs2hvNV (GLuint index, GLsizei n, const GLhalfNV *v); +GLAPI void APIENTRY glVertexAttribs3hvNV (GLuint index, GLsizei n, const GLhalfNV *v); +GLAPI void APIENTRY glVertexAttribs4hvNV (GLuint index, GLsizei n, const GLhalfNV *v); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEX2HNVPROC) (GLhalfNV x, GLhalfNV y); +typedef void (APIENTRYP PFNGLVERTEX2HVNVPROC) (const GLhalfNV *v); +typedef void (APIENTRYP PFNGLVERTEX3HNVPROC) (GLhalfNV x, GLhalfNV y, GLhalfNV z); +typedef void (APIENTRYP PFNGLVERTEX3HVNVPROC) (const GLhalfNV *v); +typedef void (APIENTRYP PFNGLVERTEX4HNVPROC) (GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w); +typedef void (APIENTRYP PFNGLVERTEX4HVNVPROC) (const GLhalfNV *v); +typedef void (APIENTRYP PFNGLNORMAL3HNVPROC) (GLhalfNV nx, GLhalfNV ny, GLhalfNV nz); +typedef void (APIENTRYP PFNGLNORMAL3HVNVPROC) (const GLhalfNV *v); +typedef void (APIENTRYP PFNGLCOLOR3HNVPROC) (GLhalfNV red, GLhalfNV green, GLhalfNV blue); +typedef void (APIENTRYP PFNGLCOLOR3HVNVPROC) (const GLhalfNV *v); +typedef void (APIENTRYP PFNGLCOLOR4HNVPROC) (GLhalfNV red, GLhalfNV green, GLhalfNV blue, GLhalfNV alpha); +typedef void (APIENTRYP PFNGLCOLOR4HVNVPROC) (const GLhalfNV *v); +typedef void (APIENTRYP PFNGLTEXCOORD1HNVPROC) (GLhalfNV s); +typedef void (APIENTRYP PFNGLTEXCOORD1HVNVPROC) (const GLhalfNV *v); +typedef void (APIENTRYP PFNGLTEXCOORD2HNVPROC) (GLhalfNV s, GLhalfNV t); +typedef void (APIENTRYP PFNGLTEXCOORD2HVNVPROC) (const GLhalfNV *v); +typedef void (APIENTRYP PFNGLTEXCOORD3HNVPROC) (GLhalfNV s, GLhalfNV t, GLhalfNV r); +typedef void (APIENTRYP PFNGLTEXCOORD3HVNVPROC) (const GLhalfNV *v); +typedef void (APIENTRYP PFNGLTEXCOORD4HNVPROC) (GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q); +typedef void (APIENTRYP PFNGLTEXCOORD4HVNVPROC) (const GLhalfNV *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1HNVPROC) (GLenum target, GLhalfNV s); +typedef void (APIENTRYP PFNGLMULTITEXCOORD1HVNVPROC) (GLenum target, const GLhalfNV *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2HNVPROC) (GLenum target, GLhalfNV s, GLhalfNV t); +typedef void (APIENTRYP PFNGLMULTITEXCOORD2HVNVPROC) (GLenum target, const GLhalfNV *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3HNVPROC) (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r); +typedef void (APIENTRYP PFNGLMULTITEXCOORD3HVNVPROC) (GLenum target, const GLhalfNV *v); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4HNVPROC) (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q); +typedef void (APIENTRYP PFNGLMULTITEXCOORD4HVNVPROC) (GLenum target, const GLhalfNV *v); +typedef void (APIENTRYP PFNGLFOGCOORDHNVPROC) (GLhalfNV fog); +typedef void (APIENTRYP PFNGLFOGCOORDHVNVPROC) (const GLhalfNV *fog); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3HNVPROC) (GLhalfNV red, GLhalfNV green, GLhalfNV blue); +typedef void (APIENTRYP PFNGLSECONDARYCOLOR3HVNVPROC) (const GLhalfNV *v); +typedef void (APIENTRYP PFNGLVERTEXWEIGHTHNVPROC) (GLhalfNV weight); +typedef void (APIENTRYP PFNGLVERTEXWEIGHTHVNVPROC) (const GLhalfNV *weight); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1HNVPROC) (GLuint index, GLhalfNV x); +typedef void (APIENTRYP PFNGLVERTEXATTRIB1HVNVPROC) (GLuint index, const GLhalfNV *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2HNVPROC) (GLuint index, GLhalfNV x, GLhalfNV y); +typedef void (APIENTRYP PFNGLVERTEXATTRIB2HVNVPROC) (GLuint index, const GLhalfNV *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3HNVPROC) (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z); +typedef void (APIENTRYP PFNGLVERTEXATTRIB3HVNVPROC) (GLuint index, const GLhalfNV *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4HNVPROC) (GLuint index, GLhalfNV x, GLhalfNV y, GLhalfNV z, GLhalfNV w); +typedef void (APIENTRYP PFNGLVERTEXATTRIB4HVNVPROC) (GLuint index, const GLhalfNV *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS1HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS2HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS3HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBS4HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v); +#endif + +#ifndef GL_NV_pixel_data_range +#define GL_NV_pixel_data_range 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPixelDataRangeNV (GLenum target, GLsizei length, GLvoid *pointer); +GLAPI void APIENTRY glFlushPixelDataRangeNV (GLenum target); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPIXELDATARANGENVPROC) (GLenum target, GLsizei length, GLvoid *pointer); +typedef void (APIENTRYP PFNGLFLUSHPIXELDATARANGENVPROC) (GLenum target); +#endif + +#ifndef GL_NV_primitive_restart +#define GL_NV_primitive_restart 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPrimitiveRestartNV (void); +GLAPI void APIENTRY glPrimitiveRestartIndexNV (GLuint index); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPRIMITIVERESTARTNVPROC) (void); +typedef void (APIENTRYP PFNGLPRIMITIVERESTARTINDEXNVPROC) (GLuint index); +#endif + +#ifndef GL_NV_texture_expand_normal +#define GL_NV_texture_expand_normal 1 +#endif + +#ifndef GL_NV_vertex_program2 +#define GL_NV_vertex_program2 1 +#endif + +#ifndef GL_ATI_map_object_buffer +#define GL_ATI_map_object_buffer 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLvoid* APIENTRY glMapObjectBufferATI (GLuint buffer); +GLAPI void APIENTRY glUnmapObjectBufferATI (GLuint buffer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLvoid* (APIENTRYP PFNGLMAPOBJECTBUFFERATIPROC) (GLuint buffer); +typedef void (APIENTRYP PFNGLUNMAPOBJECTBUFFERATIPROC) (GLuint buffer); +#endif + +#ifndef GL_ATI_separate_stencil +#define GL_ATI_separate_stencil 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glStencilOpSeparateATI (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass); +GLAPI void APIENTRY glStencilFuncSeparateATI (GLenum frontfunc, GLenum backfunc, GLint ref, GLuint mask); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLSTENCILOPSEPARATEATIPROC) (GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass); +typedef void (APIENTRYP PFNGLSTENCILFUNCSEPARATEATIPROC) (GLenum frontfunc, GLenum backfunc, GLint ref, GLuint mask); +#endif + +#ifndef GL_ATI_vertex_attrib_array_object +#define GL_ATI_vertex_attrib_array_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexAttribArrayObjectATI (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, GLuint buffer, GLuint offset); +GLAPI void APIENTRY glGetVertexAttribArrayObjectfvATI (GLuint index, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetVertexAttribArrayObjectivATI (GLuint index, GLenum pname, GLint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXATTRIBARRAYOBJECTATIPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride, GLuint buffer, GLuint offset); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBARRAYOBJECTFVATIPROC) (GLuint index, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBARRAYOBJECTIVATIPROC) (GLuint index, GLenum pname, GLint *params); +#endif + +#ifndef GL_OES_read_format +#define GL_OES_read_format 1 +#endif + +#ifndef GL_EXT_depth_bounds_test +#define GL_EXT_depth_bounds_test 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDepthBoundsEXT (GLclampd zmin, GLclampd zmax); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDEPTHBOUNDSEXTPROC) (GLclampd zmin, GLclampd zmax); +#endif + +#ifndef GL_EXT_texture_mirror_clamp +#define GL_EXT_texture_mirror_clamp 1 +#endif + +#ifndef GL_EXT_blend_equation_separate +#define GL_EXT_blend_equation_separate 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBlendEquationSeparateEXT (GLenum modeRGB, GLenum modeAlpha); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEEXTPROC) (GLenum modeRGB, GLenum modeAlpha); +#endif + +#ifndef GL_MESA_pack_invert +#define GL_MESA_pack_invert 1 +#endif + +#ifndef GL_MESA_ycbcr_texture +#define GL_MESA_ycbcr_texture 1 +#endif + +#ifndef GL_EXT_pixel_buffer_object +#define GL_EXT_pixel_buffer_object 1 +#endif + +#ifndef GL_NV_fragment_program_option +#define GL_NV_fragment_program_option 1 +#endif + +#ifndef GL_NV_fragment_program2 +#define GL_NV_fragment_program2 1 +#endif + +#ifndef GL_NV_vertex_program2_option +#define GL_NV_vertex_program2_option 1 +#endif + +#ifndef GL_NV_vertex_program3 +#define GL_NV_vertex_program3 1 +#endif + +#ifndef GL_EXT_framebuffer_object +#define GL_EXT_framebuffer_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLboolean APIENTRY glIsRenderbufferEXT (GLuint renderbuffer); +GLAPI void APIENTRY glBindRenderbufferEXT (GLenum target, GLuint renderbuffer); +GLAPI void APIENTRY glDeleteRenderbuffersEXT (GLsizei n, const GLuint *renderbuffers); +GLAPI void APIENTRY glGenRenderbuffersEXT (GLsizei n, GLuint *renderbuffers); +GLAPI void APIENTRY glRenderbufferStorageEXT (GLenum target, GLenum internalformat, GLsizei width, GLsizei height); +GLAPI void APIENTRY glGetRenderbufferParameterivEXT (GLenum target, GLenum pname, GLint *params); +GLAPI GLboolean APIENTRY glIsFramebufferEXT (GLuint framebuffer); +GLAPI void APIENTRY glBindFramebufferEXT (GLenum target, GLuint framebuffer); +GLAPI void APIENTRY glDeleteFramebuffersEXT (GLsizei n, const GLuint *framebuffers); +GLAPI void APIENTRY glGenFramebuffersEXT (GLsizei n, GLuint *framebuffers); +GLAPI GLenum APIENTRY glCheckFramebufferStatusEXT (GLenum target); +GLAPI void APIENTRY glFramebufferTexture1DEXT (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +GLAPI void APIENTRY glFramebufferTexture2DEXT (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +GLAPI void APIENTRY glFramebufferTexture3DEXT (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset); +GLAPI void APIENTRY glFramebufferRenderbufferEXT (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer); +GLAPI void APIENTRY glGetFramebufferAttachmentParameterivEXT (GLenum target, GLenum attachment, GLenum pname, GLint *params); +GLAPI void APIENTRY glGenerateMipmapEXT (GLenum target); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLboolean (APIENTRYP PFNGLISRENDERBUFFEREXTPROC) (GLuint renderbuffer); +typedef void (APIENTRYP PFNGLBINDRENDERBUFFEREXTPROC) (GLenum target, GLuint renderbuffer); +typedef void (APIENTRYP PFNGLDELETERENDERBUFFERSEXTPROC) (GLsizei n, const GLuint *renderbuffers); +typedef void (APIENTRYP PFNGLGENRENDERBUFFERSEXTPROC) (GLsizei n, GLuint *renderbuffers); +typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEEXTPROC) (GLenum target, GLenum internalformat, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLGETRENDERBUFFERPARAMETERIVEXTPROC) (GLenum target, GLenum pname, GLint *params); +typedef GLboolean (APIENTRYP PFNGLISFRAMEBUFFEREXTPROC) (GLuint framebuffer); +typedef void (APIENTRYP PFNGLBINDFRAMEBUFFEREXTPROC) (GLenum target, GLuint framebuffer); +typedef void (APIENTRYP PFNGLDELETEFRAMEBUFFERSEXTPROC) (GLsizei n, const GLuint *framebuffers); +typedef void (APIENTRYP PFNGLGENFRAMEBUFFERSEXTPROC) (GLsizei n, GLuint *framebuffers); +typedef GLenum (APIENTRYP PFNGLCHECKFRAMEBUFFERSTATUSEXTPROC) (GLenum target); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE1DEXTPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE2DEXTPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURE3DEXTPROC) (GLenum target, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset); +typedef void (APIENTRYP PFNGLFRAMEBUFFERRENDERBUFFEREXTPROC) (GLenum target, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer); +typedef void (APIENTRYP PFNGLGETFRAMEBUFFERATTACHMENTPARAMETERIVEXTPROC) (GLenum target, GLenum attachment, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGENERATEMIPMAPEXTPROC) (GLenum target); +#endif + +#ifndef GL_GREMEDY_string_marker +#define GL_GREMEDY_string_marker 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glStringMarkerGREMEDY (GLsizei len, const GLvoid *string); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLSTRINGMARKERGREMEDYPROC) (GLsizei len, const GLvoid *string); +#endif + +#ifndef GL_EXT_packed_depth_stencil +#define GL_EXT_packed_depth_stencil 1 +#endif + +#ifndef GL_EXT_stencil_clear_tag +#define GL_EXT_stencil_clear_tag 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glStencilClearTagEXT (GLsizei stencilTagBits, GLuint stencilClearTag); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLSTENCILCLEARTAGEXTPROC) (GLsizei stencilTagBits, GLuint stencilClearTag); +#endif + +#ifndef GL_EXT_texture_sRGB +#define GL_EXT_texture_sRGB 1 +#endif + +#ifndef GL_EXT_framebuffer_blit +#define GL_EXT_framebuffer_blit 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBlitFramebufferEXT (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBLITFRAMEBUFFEREXTPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter); +#endif + +#ifndef GL_EXT_framebuffer_multisample +#define GL_EXT_framebuffer_multisample 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glRenderbufferStorageMultisampleEXT (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLEEXTPROC) (GLenum target, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height); +#endif + +#ifndef GL_MESAX_texture_stack +#define GL_MESAX_texture_stack 1 +#endif + +#ifndef GL_EXT_timer_query +#define GL_EXT_timer_query 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGetQueryObjecti64vEXT (GLuint id, GLenum pname, GLint64EXT *params); +GLAPI void APIENTRY glGetQueryObjectui64vEXT (GLuint id, GLenum pname, GLuint64EXT *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGETQUERYOBJECTI64VEXTPROC) (GLuint id, GLenum pname, GLint64EXT *params); +typedef void (APIENTRYP PFNGLGETQUERYOBJECTUI64VEXTPROC) (GLuint id, GLenum pname, GLuint64EXT *params); +#endif + +#ifndef GL_EXT_gpu_program_parameters +#define GL_EXT_gpu_program_parameters 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glProgramEnvParameters4fvEXT (GLenum target, GLuint index, GLsizei count, const GLfloat *params); +GLAPI void APIENTRY glProgramLocalParameters4fvEXT (GLenum target, GLuint index, GLsizei count, const GLfloat *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERS4FVEXTPROC) (GLenum target, GLuint index, GLsizei count, const GLfloat *params); +typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERS4FVEXTPROC) (GLenum target, GLuint index, GLsizei count, const GLfloat *params); +#endif + +#ifndef GL_APPLE_flush_buffer_range +#define GL_APPLE_flush_buffer_range 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBufferParameteriAPPLE (GLenum target, GLenum pname, GLint param); +GLAPI void APIENTRY glFlushMappedBufferRangeAPPLE (GLenum target, GLintptr offset, GLsizeiptr size); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBUFFERPARAMETERIAPPLEPROC) (GLenum target, GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLFLUSHMAPPEDBUFFERRANGEAPPLEPROC) (GLenum target, GLintptr offset, GLsizeiptr size); +#endif + +#ifndef GL_NV_gpu_program4 +#define GL_NV_gpu_program4 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glProgramLocalParameterI4iNV (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w); +GLAPI void APIENTRY glProgramLocalParameterI4ivNV (GLenum target, GLuint index, const GLint *params); +GLAPI void APIENTRY glProgramLocalParametersI4ivNV (GLenum target, GLuint index, GLsizei count, const GLint *params); +GLAPI void APIENTRY glProgramLocalParameterI4uiNV (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w); +GLAPI void APIENTRY glProgramLocalParameterI4uivNV (GLenum target, GLuint index, const GLuint *params); +GLAPI void APIENTRY glProgramLocalParametersI4uivNV (GLenum target, GLuint index, GLsizei count, const GLuint *params); +GLAPI void APIENTRY glProgramEnvParameterI4iNV (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w); +GLAPI void APIENTRY glProgramEnvParameterI4ivNV (GLenum target, GLuint index, const GLint *params); +GLAPI void APIENTRY glProgramEnvParametersI4ivNV (GLenum target, GLuint index, GLsizei count, const GLint *params); +GLAPI void APIENTRY glProgramEnvParameterI4uiNV (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w); +GLAPI void APIENTRY glProgramEnvParameterI4uivNV (GLenum target, GLuint index, const GLuint *params); +GLAPI void APIENTRY glProgramEnvParametersI4uivNV (GLenum target, GLuint index, GLsizei count, const GLuint *params); +GLAPI void APIENTRY glGetProgramLocalParameterIivNV (GLenum target, GLuint index, GLint *params); +GLAPI void APIENTRY glGetProgramLocalParameterIuivNV (GLenum target, GLuint index, GLuint *params); +GLAPI void APIENTRY glGetProgramEnvParameterIivNV (GLenum target, GLuint index, GLint *params); +GLAPI void APIENTRY glGetProgramEnvParameterIuivNV (GLenum target, GLuint index, GLuint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4INVPROC) (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w); +typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4IVNVPROC) (GLenum target, GLuint index, const GLint *params); +typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERSI4IVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLint *params); +typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4UINVPROC) (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w); +typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERI4UIVNVPROC) (GLenum target, GLuint index, const GLuint *params); +typedef void (APIENTRYP PFNGLPROGRAMLOCALPARAMETERSI4UIVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLuint *params); +typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4INVPROC) (GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w); +typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4IVNVPROC) (GLenum target, GLuint index, const GLint *params); +typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERSI4IVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLint *params); +typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4UINVPROC) (GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w); +typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERI4UIVNVPROC) (GLenum target, GLuint index, const GLuint *params); +typedef void (APIENTRYP PFNGLPROGRAMENVPARAMETERSI4UIVNVPROC) (GLenum target, GLuint index, GLsizei count, const GLuint *params); +typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERIIVNVPROC) (GLenum target, GLuint index, GLint *params); +typedef void (APIENTRYP PFNGLGETPROGRAMLOCALPARAMETERIUIVNVPROC) (GLenum target, GLuint index, GLuint *params); +typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERIIVNVPROC) (GLenum target, GLuint index, GLint *params); +typedef void (APIENTRYP PFNGLGETPROGRAMENVPARAMETERIUIVNVPROC) (GLenum target, GLuint index, GLuint *params); +#endif + +#ifndef GL_NV_geometry_program4 +#define GL_NV_geometry_program4 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glProgramVertexLimitNV (GLenum target, GLint limit); +GLAPI void APIENTRY glFramebufferTextureEXT (GLenum target, GLenum attachment, GLuint texture, GLint level); +GLAPI void APIENTRY glFramebufferTextureLayerEXT (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer); +GLAPI void APIENTRY glFramebufferTextureFaceEXT (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPROGRAMVERTEXLIMITNVPROC) (GLenum target, GLint limit); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREEXTPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTURELAYEREXTPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint layer); +typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREFACEEXTPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLenum face); +#endif + +#ifndef GL_EXT_geometry_shader4 +#define GL_EXT_geometry_shader4 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glProgramParameteriEXT (GLuint program, GLenum pname, GLint value); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPROGRAMPARAMETERIEXTPROC) (GLuint program, GLenum pname, GLint value); +#endif + +#ifndef GL_NV_vertex_program4 +#define GL_NV_vertex_program4 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexAttribI1iEXT (GLuint index, GLint x); +GLAPI void APIENTRY glVertexAttribI2iEXT (GLuint index, GLint x, GLint y); +GLAPI void APIENTRY glVertexAttribI3iEXT (GLuint index, GLint x, GLint y, GLint z); +GLAPI void APIENTRY glVertexAttribI4iEXT (GLuint index, GLint x, GLint y, GLint z, GLint w); +GLAPI void APIENTRY glVertexAttribI1uiEXT (GLuint index, GLuint x); +GLAPI void APIENTRY glVertexAttribI2uiEXT (GLuint index, GLuint x, GLuint y); +GLAPI void APIENTRY glVertexAttribI3uiEXT (GLuint index, GLuint x, GLuint y, GLuint z); +GLAPI void APIENTRY glVertexAttribI4uiEXT (GLuint index, GLuint x, GLuint y, GLuint z, GLuint w); +GLAPI void APIENTRY glVertexAttribI1ivEXT (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttribI2ivEXT (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttribI3ivEXT (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttribI4ivEXT (GLuint index, const GLint *v); +GLAPI void APIENTRY glVertexAttribI1uivEXT (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttribI2uivEXT (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttribI3uivEXT (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttribI4uivEXT (GLuint index, const GLuint *v); +GLAPI void APIENTRY glVertexAttribI4bvEXT (GLuint index, const GLbyte *v); +GLAPI void APIENTRY glVertexAttribI4svEXT (GLuint index, const GLshort *v); +GLAPI void APIENTRY glVertexAttribI4ubvEXT (GLuint index, const GLubyte *v); +GLAPI void APIENTRY glVertexAttribI4usvEXT (GLuint index, const GLushort *v); +GLAPI void APIENTRY glVertexAttribIPointerEXT (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +GLAPI void APIENTRY glGetVertexAttribIivEXT (GLuint index, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetVertexAttribIuivEXT (GLuint index, GLenum pname, GLuint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IEXTPROC) (GLuint index, GLint x); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IEXTPROC) (GLuint index, GLint x, GLint y); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IEXTPROC) (GLuint index, GLint x, GLint y, GLint z); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IEXTPROC) (GLuint index, GLint x, GLint y, GLint z, GLint w); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIEXTPROC) (GLuint index, GLuint x); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIEXTPROC) (GLuint index, GLuint x, GLuint y); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIEXTPROC) (GLuint index, GLuint x, GLuint y, GLuint z); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIEXTPROC) (GLuint index, GLuint x, GLuint y, GLuint z, GLuint w); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI1IVEXTPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI2IVEXTPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI3IVEXTPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4IVEXTPROC) (GLuint index, const GLint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI1UIVEXTPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI2UIVEXTPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI3UIVEXTPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UIVEXTPROC) (GLuint index, const GLuint *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4BVEXTPROC) (GLuint index, const GLbyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4SVEXTPROC) (GLuint index, const GLshort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4UBVEXTPROC) (GLuint index, const GLubyte *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBI4USVEXTPROC) (GLuint index, const GLushort *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBIPOINTEREXTPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIIVEXTPROC) (GLuint index, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBIUIVEXTPROC) (GLuint index, GLenum pname, GLuint *params); +#endif + +#ifndef GL_EXT_gpu_shader4 +#define GL_EXT_gpu_shader4 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGetUniformuivEXT (GLuint program, GLint location, GLuint *params); +GLAPI void APIENTRY glBindFragDataLocationEXT (GLuint program, GLuint color, const GLchar *name); +GLAPI GLint APIENTRY glGetFragDataLocationEXT (GLuint program, const GLchar *name); +GLAPI void APIENTRY glUniform1uiEXT (GLint location, GLuint v0); +GLAPI void APIENTRY glUniform2uiEXT (GLint location, GLuint v0, GLuint v1); +GLAPI void APIENTRY glUniform3uiEXT (GLint location, GLuint v0, GLuint v1, GLuint v2); +GLAPI void APIENTRY glUniform4uiEXT (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3); +GLAPI void APIENTRY glUniform1uivEXT (GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glUniform2uivEXT (GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glUniform3uivEXT (GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glUniform4uivEXT (GLint location, GLsizei count, const GLuint *value); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGETUNIFORMUIVEXTPROC) (GLuint program, GLint location, GLuint *params); +typedef void (APIENTRYP PFNGLBINDFRAGDATALOCATIONEXTPROC) (GLuint program, GLuint color, const GLchar *name); +typedef GLint (APIENTRYP PFNGLGETFRAGDATALOCATIONEXTPROC) (GLuint program, const GLchar *name); +typedef void (APIENTRYP PFNGLUNIFORM1UIEXTPROC) (GLint location, GLuint v0); +typedef void (APIENTRYP PFNGLUNIFORM2UIEXTPROC) (GLint location, GLuint v0, GLuint v1); +typedef void (APIENTRYP PFNGLUNIFORM3UIEXTPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2); +typedef void (APIENTRYP PFNGLUNIFORM4UIEXTPROC) (GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3); +typedef void (APIENTRYP PFNGLUNIFORM1UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLUNIFORM2UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLUNIFORM3UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLUNIFORM4UIVEXTPROC) (GLint location, GLsizei count, const GLuint *value); +#endif + +#ifndef GL_EXT_draw_instanced +#define GL_EXT_draw_instanced 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDrawArraysInstancedEXT (GLenum mode, GLint start, GLsizei count, GLsizei primcount); +GLAPI void APIENTRY glDrawElementsInstancedEXT (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDRAWARRAYSINSTANCEDEXTPROC) (GLenum mode, GLint start, GLsizei count, GLsizei primcount); +typedef void (APIENTRYP PFNGLDRAWELEMENTSINSTANCEDEXTPROC) (GLenum mode, GLsizei count, GLenum type, const GLvoid *indices, GLsizei primcount); +#endif + +#ifndef GL_EXT_packed_float +#define GL_EXT_packed_float 1 +#endif + +#ifndef GL_EXT_texture_array +#define GL_EXT_texture_array 1 +#endif + +#ifndef GL_EXT_texture_buffer_object +#define GL_EXT_texture_buffer_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTexBufferEXT (GLenum target, GLenum internalformat, GLuint buffer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXBUFFEREXTPROC) (GLenum target, GLenum internalformat, GLuint buffer); +#endif + +#ifndef GL_EXT_texture_compression_latc +#define GL_EXT_texture_compression_latc 1 +#endif + +#ifndef GL_EXT_texture_compression_rgtc +#define GL_EXT_texture_compression_rgtc 1 +#endif + +#ifndef GL_EXT_texture_shared_exponent +#define GL_EXT_texture_shared_exponent 1 +#endif + +#ifndef GL_NV_depth_buffer_float +#define GL_NV_depth_buffer_float 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDepthRangedNV (GLdouble zNear, GLdouble zFar); +GLAPI void APIENTRY glClearDepthdNV (GLdouble depth); +GLAPI void APIENTRY glDepthBoundsdNV (GLdouble zmin, GLdouble zmax); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDEPTHRANGEDNVPROC) (GLdouble zNear, GLdouble zFar); +typedef void (APIENTRYP PFNGLCLEARDEPTHDNVPROC) (GLdouble depth); +typedef void (APIENTRYP PFNGLDEPTHBOUNDSDNVPROC) (GLdouble zmin, GLdouble zmax); +#endif + +#ifndef GL_NV_fragment_program4 +#define GL_NV_fragment_program4 1 +#endif + +#ifndef GL_NV_framebuffer_multisample_coverage +#define GL_NV_framebuffer_multisample_coverage 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glRenderbufferStorageMultisampleCoverageNV (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLRENDERBUFFERSTORAGEMULTISAMPLECOVERAGENVPROC) (GLenum target, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height); +#endif + +#ifndef GL_EXT_framebuffer_sRGB +#define GL_EXT_framebuffer_sRGB 1 +#endif + +#ifndef GL_NV_geometry_shader4 +#define GL_NV_geometry_shader4 1 +#endif + +#ifndef GL_NV_parameter_buffer_object +#define GL_NV_parameter_buffer_object 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glProgramBufferParametersfvNV (GLenum target, GLuint buffer, GLuint index, GLsizei count, const GLfloat *params); +GLAPI void APIENTRY glProgramBufferParametersIivNV (GLenum target, GLuint buffer, GLuint index, GLsizei count, const GLint *params); +GLAPI void APIENTRY glProgramBufferParametersIuivNV (GLenum target, GLuint buffer, GLuint index, GLsizei count, const GLuint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPROGRAMBUFFERPARAMETERSFVNVPROC) (GLenum target, GLuint buffer, GLuint index, GLsizei count, const GLfloat *params); +typedef void (APIENTRYP PFNGLPROGRAMBUFFERPARAMETERSIIVNVPROC) (GLenum target, GLuint buffer, GLuint index, GLsizei count, const GLint *params); +typedef void (APIENTRYP PFNGLPROGRAMBUFFERPARAMETERSIUIVNVPROC) (GLenum target, GLuint buffer, GLuint index, GLsizei count, const GLuint *params); +#endif + +#ifndef GL_EXT_draw_buffers2 +#define GL_EXT_draw_buffers2 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glColorMaskIndexedEXT (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a); +GLAPI void APIENTRY glGetBooleanIndexedvEXT (GLenum target, GLuint index, GLboolean *data); +GLAPI void APIENTRY glGetIntegerIndexedvEXT (GLenum target, GLuint index, GLint *data); +GLAPI void APIENTRY glEnableIndexedEXT (GLenum target, GLuint index); +GLAPI void APIENTRY glDisableIndexedEXT (GLenum target, GLuint index); +GLAPI GLboolean APIENTRY glIsEnabledIndexedEXT (GLenum target, GLuint index); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOLORMASKINDEXEDEXTPROC) (GLuint index, GLboolean r, GLboolean g, GLboolean b, GLboolean a); +typedef void (APIENTRYP PFNGLGETBOOLEANINDEXEDVEXTPROC) (GLenum target, GLuint index, GLboolean *data); +typedef void (APIENTRYP PFNGLGETINTEGERINDEXEDVEXTPROC) (GLenum target, GLuint index, GLint *data); +typedef void (APIENTRYP PFNGLENABLEINDEXEDEXTPROC) (GLenum target, GLuint index); +typedef void (APIENTRYP PFNGLDISABLEINDEXEDEXTPROC) (GLenum target, GLuint index); +typedef GLboolean (APIENTRYP PFNGLISENABLEDINDEXEDEXTPROC) (GLenum target, GLuint index); +#endif + +#ifndef GL_NV_transform_feedback +#define GL_NV_transform_feedback 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBeginTransformFeedbackNV (GLenum primitiveMode); +GLAPI void APIENTRY glEndTransformFeedbackNV (void); +GLAPI void APIENTRY glTransformFeedbackAttribsNV (GLuint count, const GLint *attribs, GLenum bufferMode); +GLAPI void APIENTRY glBindBufferRangeNV (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size); +GLAPI void APIENTRY glBindBufferOffsetNV (GLenum target, GLuint index, GLuint buffer, GLintptr offset); +GLAPI void APIENTRY glBindBufferBaseNV (GLenum target, GLuint index, GLuint buffer); +GLAPI void APIENTRY glTransformFeedbackVaryingsNV (GLuint program, GLsizei count, const GLint *locations, GLenum bufferMode); +GLAPI void APIENTRY glActiveVaryingNV (GLuint program, const GLchar *name); +GLAPI GLint APIENTRY glGetVaryingLocationNV (GLuint program, const GLchar *name); +GLAPI void APIENTRY glGetActiveVaryingNV (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name); +GLAPI void APIENTRY glGetTransformFeedbackVaryingNV (GLuint program, GLuint index, GLint *location); +GLAPI void APIENTRY glTransformFeedbackStreamAttribsNV (GLsizei count, const GLint *attribs, GLsizei nbuffers, const GLint *bufstreams, GLenum bufferMode); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBEGINTRANSFORMFEEDBACKNVPROC) (GLenum primitiveMode); +typedef void (APIENTRYP PFNGLENDTRANSFORMFEEDBACKNVPROC) (void); +typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKATTRIBSNVPROC) (GLuint count, const GLint *attribs, GLenum bufferMode); +typedef void (APIENTRYP PFNGLBINDBUFFERRANGENVPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size); +typedef void (APIENTRYP PFNGLBINDBUFFEROFFSETNVPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset); +typedef void (APIENTRYP PFNGLBINDBUFFERBASENVPROC) (GLenum target, GLuint index, GLuint buffer); +typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKVARYINGSNVPROC) (GLuint program, GLsizei count, const GLint *locations, GLenum bufferMode); +typedef void (APIENTRYP PFNGLACTIVEVARYINGNVPROC) (GLuint program, const GLchar *name); +typedef GLint (APIENTRYP PFNGLGETVARYINGLOCATIONNVPROC) (GLuint program, const GLchar *name); +typedef void (APIENTRYP PFNGLGETACTIVEVARYINGNVPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name); +typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKVARYINGNVPROC) (GLuint program, GLuint index, GLint *location); +typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKSTREAMATTRIBSNVPROC) (GLsizei count, const GLint *attribs, GLsizei nbuffers, const GLint *bufstreams, GLenum bufferMode); +#endif + +#ifndef GL_EXT_bindable_uniform +#define GL_EXT_bindable_uniform 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glUniformBufferEXT (GLuint program, GLint location, GLuint buffer); +GLAPI GLint APIENTRY glGetUniformBufferSizeEXT (GLuint program, GLint location); +GLAPI GLintptr APIENTRY glGetUniformOffsetEXT (GLuint program, GLint location); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLUNIFORMBUFFEREXTPROC) (GLuint program, GLint location, GLuint buffer); +typedef GLint (APIENTRYP PFNGLGETUNIFORMBUFFERSIZEEXTPROC) (GLuint program, GLint location); +typedef GLintptr (APIENTRYP PFNGLGETUNIFORMOFFSETEXTPROC) (GLuint program, GLint location); +#endif + +#ifndef GL_EXT_texture_integer +#define GL_EXT_texture_integer 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTexParameterIivEXT (GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glTexParameterIuivEXT (GLenum target, GLenum pname, const GLuint *params); +GLAPI void APIENTRY glGetTexParameterIivEXT (GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetTexParameterIuivEXT (GLenum target, GLenum pname, GLuint *params); +GLAPI void APIENTRY glClearColorIiEXT (GLint red, GLint green, GLint blue, GLint alpha); +GLAPI void APIENTRY glClearColorIuiEXT (GLuint red, GLuint green, GLuint blue, GLuint alpha); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXPARAMETERIIVEXTPROC) (GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLTEXPARAMETERIUIVEXTPROC) (GLenum target, GLenum pname, const GLuint *params); +typedef void (APIENTRYP PFNGLGETTEXPARAMETERIIVEXTPROC) (GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETTEXPARAMETERIUIVEXTPROC) (GLenum target, GLenum pname, GLuint *params); +typedef void (APIENTRYP PFNGLCLEARCOLORIIEXTPROC) (GLint red, GLint green, GLint blue, GLint alpha); +typedef void (APIENTRYP PFNGLCLEARCOLORIUIEXTPROC) (GLuint red, GLuint green, GLuint blue, GLuint alpha); +#endif + +#ifndef GL_GREMEDY_frame_terminator +#define GL_GREMEDY_frame_terminator 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glFrameTerminatorGREMEDY (void); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLFRAMETERMINATORGREMEDYPROC) (void); +#endif + +#ifndef GL_NV_conditional_render +#define GL_NV_conditional_render 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBeginConditionalRenderNV (GLuint id, GLenum mode); +GLAPI void APIENTRY glEndConditionalRenderNV (void); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBEGINCONDITIONALRENDERNVPROC) (GLuint id, GLenum mode); +typedef void (APIENTRYP PFNGLENDCONDITIONALRENDERNVPROC) (void); +#endif + +#ifndef GL_NV_present_video +#define GL_NV_present_video 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glPresentFrameKeyedNV (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLuint key0, GLenum target1, GLuint fill1, GLuint key1); +GLAPI void APIENTRY glPresentFrameDualFillNV (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLenum target1, GLuint fill1, GLenum target2, GLuint fill2, GLenum target3, GLuint fill3); +GLAPI void APIENTRY glGetVideoivNV (GLuint video_slot, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetVideouivNV (GLuint video_slot, GLenum pname, GLuint *params); +GLAPI void APIENTRY glGetVideoi64vNV (GLuint video_slot, GLenum pname, GLint64EXT *params); +GLAPI void APIENTRY glGetVideoui64vNV (GLuint video_slot, GLenum pname, GLuint64EXT *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPRESENTFRAMEKEYEDNVPROC) (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLuint key0, GLenum target1, GLuint fill1, GLuint key1); +typedef void (APIENTRYP PFNGLPRESENTFRAMEDUALFILLNVPROC) (GLuint video_slot, GLuint64EXT minPresentTime, GLuint beginPresentTimeId, GLuint presentDurationId, GLenum type, GLenum target0, GLuint fill0, GLenum target1, GLuint fill1, GLenum target2, GLuint fill2, GLenum target3, GLuint fill3); +typedef void (APIENTRYP PFNGLGETVIDEOIVNVPROC) (GLuint video_slot, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETVIDEOUIVNVPROC) (GLuint video_slot, GLenum pname, GLuint *params); +typedef void (APIENTRYP PFNGLGETVIDEOI64VNVPROC) (GLuint video_slot, GLenum pname, GLint64EXT *params); +typedef void (APIENTRYP PFNGLGETVIDEOUI64VNVPROC) (GLuint video_slot, GLenum pname, GLuint64EXT *params); +#endif + +#ifndef GL_EXT_transform_feedback +#define GL_EXT_transform_feedback 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBeginTransformFeedbackEXT (GLenum primitiveMode); +GLAPI void APIENTRY glEndTransformFeedbackEXT (void); +GLAPI void APIENTRY glBindBufferRangeEXT (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size); +GLAPI void APIENTRY glBindBufferOffsetEXT (GLenum target, GLuint index, GLuint buffer, GLintptr offset); +GLAPI void APIENTRY glBindBufferBaseEXT (GLenum target, GLuint index, GLuint buffer); +GLAPI void APIENTRY glTransformFeedbackVaryingsEXT (GLuint program, GLsizei count, const GLchar* *varyings, GLenum bufferMode); +GLAPI void APIENTRY glGetTransformFeedbackVaryingEXT (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBEGINTRANSFORMFEEDBACKEXTPROC) (GLenum primitiveMode); +typedef void (APIENTRYP PFNGLENDTRANSFORMFEEDBACKEXTPROC) (void); +typedef void (APIENTRYP PFNGLBINDBUFFERRANGEEXTPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset, GLsizeiptr size); +typedef void (APIENTRYP PFNGLBINDBUFFEROFFSETEXTPROC) (GLenum target, GLuint index, GLuint buffer, GLintptr offset); +typedef void (APIENTRYP PFNGLBINDBUFFERBASEEXTPROC) (GLenum target, GLuint index, GLuint buffer); +typedef void (APIENTRYP PFNGLTRANSFORMFEEDBACKVARYINGSEXTPROC) (GLuint program, GLsizei count, const GLchar* *varyings, GLenum bufferMode); +typedef void (APIENTRYP PFNGLGETTRANSFORMFEEDBACKVARYINGEXTPROC) (GLuint program, GLuint index, GLsizei bufSize, GLsizei *length, GLsizei *size, GLenum *type, GLchar *name); +#endif + +#ifndef GL_EXT_direct_state_access +#define GL_EXT_direct_state_access 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glClientAttribDefaultEXT (GLbitfield mask); +GLAPI void APIENTRY glPushClientAttribDefaultEXT (GLbitfield mask); +GLAPI void APIENTRY glMatrixLoadfEXT (GLenum mode, const GLfloat *m); +GLAPI void APIENTRY glMatrixLoaddEXT (GLenum mode, const GLdouble *m); +GLAPI void APIENTRY glMatrixMultfEXT (GLenum mode, const GLfloat *m); +GLAPI void APIENTRY glMatrixMultdEXT (GLenum mode, const GLdouble *m); +GLAPI void APIENTRY glMatrixLoadIdentityEXT (GLenum mode); +GLAPI void APIENTRY glMatrixRotatefEXT (GLenum mode, GLfloat angle, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glMatrixRotatedEXT (GLenum mode, GLdouble angle, GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glMatrixScalefEXT (GLenum mode, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glMatrixScaledEXT (GLenum mode, GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glMatrixTranslatefEXT (GLenum mode, GLfloat x, GLfloat y, GLfloat z); +GLAPI void APIENTRY glMatrixTranslatedEXT (GLenum mode, GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glMatrixFrustumEXT (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar); +GLAPI void APIENTRY glMatrixOrthoEXT (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar); +GLAPI void APIENTRY glMatrixPopEXT (GLenum mode); +GLAPI void APIENTRY glMatrixPushEXT (GLenum mode); +GLAPI void APIENTRY glMatrixLoadTransposefEXT (GLenum mode, const GLfloat *m); +GLAPI void APIENTRY glMatrixLoadTransposedEXT (GLenum mode, const GLdouble *m); +GLAPI void APIENTRY glMatrixMultTransposefEXT (GLenum mode, const GLfloat *m); +GLAPI void APIENTRY glMatrixMultTransposedEXT (GLenum mode, const GLdouble *m); +GLAPI void APIENTRY glTextureParameterfEXT (GLuint texture, GLenum target, GLenum pname, GLfloat param); +GLAPI void APIENTRY glTextureParameterfvEXT (GLuint texture, GLenum target, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glTextureParameteriEXT (GLuint texture, GLenum target, GLenum pname, GLint param); +GLAPI void APIENTRY glTextureParameterivEXT (GLuint texture, GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glTextureImage1DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glTextureImage2DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glTextureSubImage1DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glTextureSubImage2DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glCopyTextureImage1DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border); +GLAPI void APIENTRY glCopyTextureImage2DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border); +GLAPI void APIENTRY glCopyTextureSubImage1DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width); +GLAPI void APIENTRY glCopyTextureSubImage2DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height); +GLAPI void APIENTRY glGetTextureImageEXT (GLuint texture, GLenum target, GLint level, GLenum format, GLenum type, GLvoid *pixels); +GLAPI void APIENTRY glGetTextureParameterfvEXT (GLuint texture, GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetTextureParameterivEXT (GLuint texture, GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetTextureLevelParameterfvEXT (GLuint texture, GLenum target, GLint level, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetTextureLevelParameterivEXT (GLuint texture, GLenum target, GLint level, GLenum pname, GLint *params); +GLAPI void APIENTRY glTextureImage3DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glTextureSubImage3DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glCopyTextureSubImage3DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height); +GLAPI void APIENTRY glMultiTexParameterfEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat param); +GLAPI void APIENTRY glMultiTexParameterfvEXT (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glMultiTexParameteriEXT (GLenum texunit, GLenum target, GLenum pname, GLint param); +GLAPI void APIENTRY glMultiTexParameterivEXT (GLenum texunit, GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glMultiTexImage1DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glMultiTexImage2DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glMultiTexSubImage1DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glMultiTexSubImage2DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glCopyMultiTexImage1DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border); +GLAPI void APIENTRY glCopyMultiTexImage2DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border); +GLAPI void APIENTRY glCopyMultiTexSubImage1DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width); +GLAPI void APIENTRY glCopyMultiTexSubImage2DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height); +GLAPI void APIENTRY glGetMultiTexImageEXT (GLenum texunit, GLenum target, GLint level, GLenum format, GLenum type, GLvoid *pixels); +GLAPI void APIENTRY glGetMultiTexParameterfvEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetMultiTexParameterivEXT (GLenum texunit, GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetMultiTexLevelParameterfvEXT (GLenum texunit, GLenum target, GLint level, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetMultiTexLevelParameterivEXT (GLenum texunit, GLenum target, GLint level, GLenum pname, GLint *params); +GLAPI void APIENTRY glMultiTexImage3DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glMultiTexSubImage3DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels); +GLAPI void APIENTRY glCopyMultiTexSubImage3DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height); +GLAPI void APIENTRY glBindMultiTextureEXT (GLenum texunit, GLenum target, GLuint texture); +GLAPI void APIENTRY glEnableClientStateIndexedEXT (GLenum array, GLuint index); +GLAPI void APIENTRY glDisableClientStateIndexedEXT (GLenum array, GLuint index); +GLAPI void APIENTRY glMultiTexCoordPointerEXT (GLenum texunit, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +GLAPI void APIENTRY glMultiTexEnvfEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat param); +GLAPI void APIENTRY glMultiTexEnvfvEXT (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glMultiTexEnviEXT (GLenum texunit, GLenum target, GLenum pname, GLint param); +GLAPI void APIENTRY glMultiTexEnvivEXT (GLenum texunit, GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glMultiTexGendEXT (GLenum texunit, GLenum coord, GLenum pname, GLdouble param); +GLAPI void APIENTRY glMultiTexGendvEXT (GLenum texunit, GLenum coord, GLenum pname, const GLdouble *params); +GLAPI void APIENTRY glMultiTexGenfEXT (GLenum texunit, GLenum coord, GLenum pname, GLfloat param); +GLAPI void APIENTRY glMultiTexGenfvEXT (GLenum texunit, GLenum coord, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glMultiTexGeniEXT (GLenum texunit, GLenum coord, GLenum pname, GLint param); +GLAPI void APIENTRY glMultiTexGenivEXT (GLenum texunit, GLenum coord, GLenum pname, const GLint *params); +GLAPI void APIENTRY glGetMultiTexEnvfvEXT (GLenum texunit, GLenum target, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetMultiTexEnvivEXT (GLenum texunit, GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetMultiTexGendvEXT (GLenum texunit, GLenum coord, GLenum pname, GLdouble *params); +GLAPI void APIENTRY glGetMultiTexGenfvEXT (GLenum texunit, GLenum coord, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetMultiTexGenivEXT (GLenum texunit, GLenum coord, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetFloatIndexedvEXT (GLenum target, GLuint index, GLfloat *data); +GLAPI void APIENTRY glGetDoubleIndexedvEXT (GLenum target, GLuint index, GLdouble *data); +GLAPI void APIENTRY glGetPointerIndexedvEXT (GLenum target, GLuint index, GLvoid* *data); +GLAPI void APIENTRY glCompressedTextureImage3DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glCompressedTextureImage2DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glCompressedTextureImage1DEXT (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glCompressedTextureSubImage3DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glCompressedTextureSubImage2DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glCompressedTextureSubImage1DEXT (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glGetCompressedTextureImageEXT (GLuint texture, GLenum target, GLint lod, GLvoid *img); +GLAPI void APIENTRY glCompressedMultiTexImage3DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glCompressedMultiTexImage2DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glCompressedMultiTexImage1DEXT (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glCompressedMultiTexSubImage3DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glCompressedMultiTexSubImage2DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glCompressedMultiTexSubImage1DEXT (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *bits); +GLAPI void APIENTRY glGetCompressedMultiTexImageEXT (GLenum texunit, GLenum target, GLint lod, GLvoid *img); +GLAPI void APIENTRY glNamedProgramStringEXT (GLuint program, GLenum target, GLenum format, GLsizei len, const GLvoid *string); +GLAPI void APIENTRY glNamedProgramLocalParameter4dEXT (GLuint program, GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glNamedProgramLocalParameter4dvEXT (GLuint program, GLenum target, GLuint index, const GLdouble *params); +GLAPI void APIENTRY glNamedProgramLocalParameter4fEXT (GLuint program, GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +GLAPI void APIENTRY glNamedProgramLocalParameter4fvEXT (GLuint program, GLenum target, GLuint index, const GLfloat *params); +GLAPI void APIENTRY glGetNamedProgramLocalParameterdvEXT (GLuint program, GLenum target, GLuint index, GLdouble *params); +GLAPI void APIENTRY glGetNamedProgramLocalParameterfvEXT (GLuint program, GLenum target, GLuint index, GLfloat *params); +GLAPI void APIENTRY glGetNamedProgramivEXT (GLuint program, GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetNamedProgramStringEXT (GLuint program, GLenum target, GLenum pname, GLvoid *string); +GLAPI void APIENTRY glNamedProgramLocalParameters4fvEXT (GLuint program, GLenum target, GLuint index, GLsizei count, const GLfloat *params); +GLAPI void APIENTRY glNamedProgramLocalParameterI4iEXT (GLuint program, GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w); +GLAPI void APIENTRY glNamedProgramLocalParameterI4ivEXT (GLuint program, GLenum target, GLuint index, const GLint *params); +GLAPI void APIENTRY glNamedProgramLocalParametersI4ivEXT (GLuint program, GLenum target, GLuint index, GLsizei count, const GLint *params); +GLAPI void APIENTRY glNamedProgramLocalParameterI4uiEXT (GLuint program, GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w); +GLAPI void APIENTRY glNamedProgramLocalParameterI4uivEXT (GLuint program, GLenum target, GLuint index, const GLuint *params); +GLAPI void APIENTRY glNamedProgramLocalParametersI4uivEXT (GLuint program, GLenum target, GLuint index, GLsizei count, const GLuint *params); +GLAPI void APIENTRY glGetNamedProgramLocalParameterIivEXT (GLuint program, GLenum target, GLuint index, GLint *params); +GLAPI void APIENTRY glGetNamedProgramLocalParameterIuivEXT (GLuint program, GLenum target, GLuint index, GLuint *params); +GLAPI void APIENTRY glTextureParameterIivEXT (GLuint texture, GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glTextureParameterIuivEXT (GLuint texture, GLenum target, GLenum pname, const GLuint *params); +GLAPI void APIENTRY glGetTextureParameterIivEXT (GLuint texture, GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetTextureParameterIuivEXT (GLuint texture, GLenum target, GLenum pname, GLuint *params); +GLAPI void APIENTRY glMultiTexParameterIivEXT (GLenum texunit, GLenum target, GLenum pname, const GLint *params); +GLAPI void APIENTRY glMultiTexParameterIuivEXT (GLenum texunit, GLenum target, GLenum pname, const GLuint *params); +GLAPI void APIENTRY glGetMultiTexParameterIivEXT (GLenum texunit, GLenum target, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetMultiTexParameterIuivEXT (GLenum texunit, GLenum target, GLenum pname, GLuint *params); +GLAPI void APIENTRY glProgramUniform1fEXT (GLuint program, GLint location, GLfloat v0); +GLAPI void APIENTRY glProgramUniform2fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1); +GLAPI void APIENTRY glProgramUniform3fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2); +GLAPI void APIENTRY glProgramUniform4fEXT (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3); +GLAPI void APIENTRY glProgramUniform1iEXT (GLuint program, GLint location, GLint v0); +GLAPI void APIENTRY glProgramUniform2iEXT (GLuint program, GLint location, GLint v0, GLint v1); +GLAPI void APIENTRY glProgramUniform3iEXT (GLuint program, GLint location, GLint v0, GLint v1, GLint v2); +GLAPI void APIENTRY glProgramUniform4iEXT (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3); +GLAPI void APIENTRY glProgramUniform1fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glProgramUniform2fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glProgramUniform3fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glProgramUniform4fvEXT (GLuint program, GLint location, GLsizei count, const GLfloat *value); +GLAPI void APIENTRY glProgramUniform1ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glProgramUniform2ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glProgramUniform3ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glProgramUniform4ivEXT (GLuint program, GLint location, GLsizei count, const GLint *value); +GLAPI void APIENTRY glProgramUniformMatrix2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix2x3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix3x2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix2x4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix4x2fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix3x4fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniformMatrix4x3fvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +GLAPI void APIENTRY glProgramUniform1uiEXT (GLuint program, GLint location, GLuint v0); +GLAPI void APIENTRY glProgramUniform2uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1); +GLAPI void APIENTRY glProgramUniform3uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2); +GLAPI void APIENTRY glProgramUniform4uiEXT (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3); +GLAPI void APIENTRY glProgramUniform1uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glProgramUniform2uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glProgramUniform3uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glProgramUniform4uivEXT (GLuint program, GLint location, GLsizei count, const GLuint *value); +GLAPI void APIENTRY glNamedBufferDataEXT (GLuint buffer, GLsizeiptr size, const GLvoid *data, GLenum usage); +GLAPI void APIENTRY glNamedBufferSubDataEXT (GLuint buffer, GLintptr offset, GLsizeiptr size, const GLvoid *data); +GLAPI GLvoid* APIENTRY glMapNamedBufferEXT (GLuint buffer, GLenum access); +GLAPI GLboolean APIENTRY glUnmapNamedBufferEXT (GLuint buffer); +GLAPI GLvoid* APIENTRY glMapNamedBufferRangeEXT (GLuint buffer, GLintptr offset, GLsizeiptr length, GLbitfield access); +GLAPI void APIENTRY glFlushMappedNamedBufferRangeEXT (GLuint buffer, GLintptr offset, GLsizeiptr length); +GLAPI void APIENTRY glNamedCopyBufferSubDataEXT (GLuint readBuffer, GLuint writeBuffer, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size); +GLAPI void APIENTRY glGetNamedBufferParameterivEXT (GLuint buffer, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetNamedBufferPointervEXT (GLuint buffer, GLenum pname, GLvoid* *params); +GLAPI void APIENTRY glGetNamedBufferSubDataEXT (GLuint buffer, GLintptr offset, GLsizeiptr size, GLvoid *data); +GLAPI void APIENTRY glTextureBufferEXT (GLuint texture, GLenum target, GLenum internalformat, GLuint buffer); +GLAPI void APIENTRY glMultiTexBufferEXT (GLenum texunit, GLenum target, GLenum internalformat, GLuint buffer); +GLAPI void APIENTRY glNamedRenderbufferStorageEXT (GLuint renderbuffer, GLenum internalformat, GLsizei width, GLsizei height); +GLAPI void APIENTRY glGetNamedRenderbufferParameterivEXT (GLuint renderbuffer, GLenum pname, GLint *params); +GLAPI GLenum APIENTRY glCheckNamedFramebufferStatusEXT (GLuint framebuffer, GLenum target); +GLAPI void APIENTRY glNamedFramebufferTexture1DEXT (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +GLAPI void APIENTRY glNamedFramebufferTexture2DEXT (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +GLAPI void APIENTRY glNamedFramebufferTexture3DEXT (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset); +GLAPI void APIENTRY glNamedFramebufferRenderbufferEXT (GLuint framebuffer, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer); +GLAPI void APIENTRY glGetNamedFramebufferAttachmentParameterivEXT (GLuint framebuffer, GLenum attachment, GLenum pname, GLint *params); +GLAPI void APIENTRY glGenerateTextureMipmapEXT (GLuint texture, GLenum target); +GLAPI void APIENTRY glGenerateMultiTexMipmapEXT (GLenum texunit, GLenum target); +GLAPI void APIENTRY glFramebufferDrawBufferEXT (GLuint framebuffer, GLenum mode); +GLAPI void APIENTRY glFramebufferDrawBuffersEXT (GLuint framebuffer, GLsizei n, const GLenum *bufs); +GLAPI void APIENTRY glFramebufferReadBufferEXT (GLuint framebuffer, GLenum mode); +GLAPI void APIENTRY glGetFramebufferParameterivEXT (GLuint framebuffer, GLenum pname, GLint *params); +GLAPI void APIENTRY glNamedRenderbufferStorageMultisampleEXT (GLuint renderbuffer, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height); +GLAPI void APIENTRY glNamedRenderbufferStorageMultisampleCoverageEXT (GLuint renderbuffer, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height); +GLAPI void APIENTRY glNamedFramebufferTextureEXT (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level); +GLAPI void APIENTRY glNamedFramebufferTextureLayerEXT (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLint layer); +GLAPI void APIENTRY glNamedFramebufferTextureFaceEXT (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLenum face); +GLAPI void APIENTRY glTextureRenderbufferEXT (GLuint texture, GLenum target, GLuint renderbuffer); +GLAPI void APIENTRY glMultiTexRenderbufferEXT (GLenum texunit, GLenum target, GLuint renderbuffer); +GLAPI void APIENTRY glProgramUniform1dEXT (GLuint program, GLint location, GLdouble x); +GLAPI void APIENTRY glProgramUniform2dEXT (GLuint program, GLint location, GLdouble x, GLdouble y); +GLAPI void APIENTRY glProgramUniform3dEXT (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glProgramUniform4dEXT (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glProgramUniform1dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glProgramUniform2dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glProgramUniform3dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glProgramUniform4dvEXT (GLuint program, GLint location, GLsizei count, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix2dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix3dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix4dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix2x3dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix2x4dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix3x2dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix3x4dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix4x2dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +GLAPI void APIENTRY glProgramUniformMatrix4x3dvEXT (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCLIENTATTRIBDEFAULTEXTPROC) (GLbitfield mask); +typedef void (APIENTRYP PFNGLPUSHCLIENTATTRIBDEFAULTEXTPROC) (GLbitfield mask); +typedef void (APIENTRYP PFNGLMATRIXLOADFEXTPROC) (GLenum mode, const GLfloat *m); +typedef void (APIENTRYP PFNGLMATRIXLOADDEXTPROC) (GLenum mode, const GLdouble *m); +typedef void (APIENTRYP PFNGLMATRIXMULTFEXTPROC) (GLenum mode, const GLfloat *m); +typedef void (APIENTRYP PFNGLMATRIXMULTDEXTPROC) (GLenum mode, const GLdouble *m); +typedef void (APIENTRYP PFNGLMATRIXLOADIDENTITYEXTPROC) (GLenum mode); +typedef void (APIENTRYP PFNGLMATRIXROTATEFEXTPROC) (GLenum mode, GLfloat angle, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLMATRIXROTATEDEXTPROC) (GLenum mode, GLdouble angle, GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLMATRIXSCALEFEXTPROC) (GLenum mode, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLMATRIXSCALEDEXTPROC) (GLenum mode, GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLMATRIXTRANSLATEFEXTPROC) (GLenum mode, GLfloat x, GLfloat y, GLfloat z); +typedef void (APIENTRYP PFNGLMATRIXTRANSLATEDEXTPROC) (GLenum mode, GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLMATRIXFRUSTUMEXTPROC) (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar); +typedef void (APIENTRYP PFNGLMATRIXORTHOEXTPROC) (GLenum mode, GLdouble left, GLdouble right, GLdouble bottom, GLdouble top, GLdouble zNear, GLdouble zFar); +typedef void (APIENTRYP PFNGLMATRIXPOPEXTPROC) (GLenum mode); +typedef void (APIENTRYP PFNGLMATRIXPUSHEXTPROC) (GLenum mode); +typedef void (APIENTRYP PFNGLMATRIXLOADTRANSPOSEFEXTPROC) (GLenum mode, const GLfloat *m); +typedef void (APIENTRYP PFNGLMATRIXLOADTRANSPOSEDEXTPROC) (GLenum mode, const GLdouble *m); +typedef void (APIENTRYP PFNGLMATRIXMULTTRANSPOSEFEXTPROC) (GLenum mode, const GLfloat *m); +typedef void (APIENTRYP PFNGLMATRIXMULTTRANSPOSEDEXTPROC) (GLenum mode, const GLdouble *m); +typedef void (APIENTRYP PFNGLTEXTUREPARAMETERFEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLTEXTUREPARAMETERFVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLTEXTUREIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLTEXTUREIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLCOPYTEXTUREIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border); +typedef void (APIENTRYP PFNGLCOPYTEXTUREIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border); +typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width); +typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLGETTEXTUREIMAGEEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum format, GLenum type, GLvoid *pixels); +typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERFVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETTEXTURELEVELPARAMETERFVEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETTEXTURELEVELPARAMETERIVEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLTEXTUREIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLTEXTURESUBIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLCOPYTEXTURESUBIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLMULTITEXPARAMETERFEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLMULTITEXPARAMETERFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLMULTITEXIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLMULTITEXIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLMULTITEXSUBIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLMULTITEXSUBIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLCOPYMULTITEXIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLint border); +typedef void (APIENTRYP PFNGLCOPYMULTITEXIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLint x, GLint y, GLsizei width, GLsizei height, GLint border); +typedef void (APIENTRYP PFNGLCOPYMULTITEXSUBIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint x, GLint y, GLsizei width); +typedef void (APIENTRYP PFNGLCOPYMULTITEXSUBIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint x, GLint y, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLGETMULTITEXIMAGEEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum format, GLenum type, GLvoid *pixels); +typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETMULTITEXLEVELPARAMETERFVEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETMULTITEXLEVELPARAMETERIVEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLMULTITEXIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLMULTITEXSUBIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLenum type, const GLvoid *pixels); +typedef void (APIENTRYP PFNGLCOPYMULTITEXSUBIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLint x, GLint y, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLBINDMULTITEXTUREEXTPROC) (GLenum texunit, GLenum target, GLuint texture); +typedef void (APIENTRYP PFNGLENABLECLIENTSTATEINDEXEDEXTPROC) (GLenum array, GLuint index); +typedef void (APIENTRYP PFNGLDISABLECLIENTSTATEINDEXEDEXTPROC) (GLenum array, GLuint index); +typedef void (APIENTRYP PFNGLMULTITEXCOORDPOINTEREXTPROC) (GLenum texunit, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLMULTITEXENVFEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLMULTITEXENVFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLMULTITEXENVIEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLMULTITEXENVIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLMULTITEXGENDEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLdouble param); +typedef void (APIENTRYP PFNGLMULTITEXGENDVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, const GLdouble *params); +typedef void (APIENTRYP PFNGLMULTITEXGENFEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLfloat param); +typedef void (APIENTRYP PFNGLMULTITEXGENFVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLMULTITEXGENIEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLint param); +typedef void (APIENTRYP PFNGLMULTITEXGENIVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLGETMULTITEXENVFVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETMULTITEXENVIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETMULTITEXGENDVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLdouble *params); +typedef void (APIENTRYP PFNGLGETMULTITEXGENFVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETMULTITEXGENIVEXTPROC) (GLenum texunit, GLenum coord, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETFLOATINDEXEDVEXTPROC) (GLenum target, GLuint index, GLfloat *data); +typedef void (APIENTRYP PFNGLGETDOUBLEINDEXEDVEXTPROC) (GLenum target, GLuint index, GLdouble *data); +typedef void (APIENTRYP PFNGLGETPOINTERINDEXEDVEXTPROC) (GLenum target, GLuint index, GLvoid* *data); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTUREIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTUREIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTUREIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE3DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE2DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLCOMPRESSEDTEXTURESUBIMAGE1DEXTPROC) (GLuint texture, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLGETCOMPRESSEDTEXTUREIMAGEEXTPROC) (GLuint texture, GLenum target, GLint lod, GLvoid *img); +typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLsizei depth, GLint border, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLsizei height, GLint border, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLenum internalformat, GLsizei width, GLint border, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXSUBIMAGE3DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLint zoffset, GLsizei width, GLsizei height, GLsizei depth, GLenum format, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXSUBIMAGE2DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLint yoffset, GLsizei width, GLsizei height, GLenum format, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLCOMPRESSEDMULTITEXSUBIMAGE1DEXTPROC) (GLenum texunit, GLenum target, GLint level, GLint xoffset, GLsizei width, GLenum format, GLsizei imageSize, const GLvoid *bits); +typedef void (APIENTRYP PFNGLGETCOMPRESSEDMULTITEXIMAGEEXTPROC) (GLenum texunit, GLenum target, GLint lod, GLvoid *img); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMSTRINGEXTPROC) (GLuint program, GLenum target, GLenum format, GLsizei len, const GLvoid *string); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4DEXTPROC) (GLuint program, GLenum target, GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4DVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLdouble *params); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4FEXTPROC) (GLuint program, GLenum target, GLuint index, GLfloat x, GLfloat y, GLfloat z, GLfloat w); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETER4FVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLfloat *params); +typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERDVEXTPROC) (GLuint program, GLenum target, GLuint index, GLdouble *params); +typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERFVEXTPROC) (GLuint program, GLenum target, GLuint index, GLfloat *params); +typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMIVEXTPROC) (GLuint program, GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMSTRINGEXTPROC) (GLuint program, GLenum target, GLenum pname, GLvoid *string); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERS4FVEXTPROC) (GLuint program, GLenum target, GLuint index, GLsizei count, const GLfloat *params); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4IEXTPROC) (GLuint program, GLenum target, GLuint index, GLint x, GLint y, GLint z, GLint w); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4IVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLint *params); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERSI4IVEXTPROC) (GLuint program, GLenum target, GLuint index, GLsizei count, const GLint *params); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4UIEXTPROC) (GLuint program, GLenum target, GLuint index, GLuint x, GLuint y, GLuint z, GLuint w); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERI4UIVEXTPROC) (GLuint program, GLenum target, GLuint index, const GLuint *params); +typedef void (APIENTRYP PFNGLNAMEDPROGRAMLOCALPARAMETERSI4UIVEXTPROC) (GLuint program, GLenum target, GLuint index, GLsizei count, const GLuint *params); +typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERIIVEXTPROC) (GLuint program, GLenum target, GLuint index, GLint *params); +typedef void (APIENTRYP PFNGLGETNAMEDPROGRAMLOCALPARAMETERIUIVEXTPROC) (GLuint program, GLenum target, GLuint index, GLuint *params); +typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLTEXTUREPARAMETERIUIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, const GLuint *params); +typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETTEXTUREPARAMETERIUIVEXTPROC) (GLuint texture, GLenum target, GLenum pname, GLuint *params); +typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLMULTITEXPARAMETERIUIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, const GLuint *params); +typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERIIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETMULTITEXPARAMETERIUIVEXTPROC) (GLenum texunit, GLenum target, GLenum pname, GLuint *params); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FEXTPROC) (GLuint program, GLint location, GLfloat v0); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FEXTPROC) (GLuint program, GLint location, GLfloat v0, GLfloat v1, GLfloat v2, GLfloat v3); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IEXTPROC) (GLuint program, GLint location, GLint v0); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IEXTPROC) (GLuint program, GLint location, GLint v0, GLint v1, GLint v2, GLint v3); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4FVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4IVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3FVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLfloat *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIEXTPROC) (GLuint program, GLint location, GLuint v0); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIEXTPROC) (GLuint program, GLint location, GLuint v0, GLuint v1, GLuint v2, GLuint v3); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UIVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLuint *value); +typedef void (APIENTRYP PFNGLNAMEDBUFFERDATAEXTPROC) (GLuint buffer, GLsizeiptr size, const GLvoid *data, GLenum usage); +typedef void (APIENTRYP PFNGLNAMEDBUFFERSUBDATAEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr size, const GLvoid *data); +typedef GLvoid* (APIENTRYP PFNGLMAPNAMEDBUFFEREXTPROC) (GLuint buffer, GLenum access); +typedef GLboolean (APIENTRYP PFNGLUNMAPNAMEDBUFFEREXTPROC) (GLuint buffer); +typedef GLvoid* (APIENTRYP PFNGLMAPNAMEDBUFFERRANGEEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr length, GLbitfield access); +typedef void (APIENTRYP PFNGLFLUSHMAPPEDNAMEDBUFFERRANGEEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr length); +typedef void (APIENTRYP PFNGLNAMEDCOPYBUFFERSUBDATAEXTPROC) (GLuint readBuffer, GLuint writeBuffer, GLintptr readOffset, GLintptr writeOffset, GLsizeiptr size); +typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPARAMETERIVEXTPROC) (GLuint buffer, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPOINTERVEXTPROC) (GLuint buffer, GLenum pname, GLvoid* *params); +typedef void (APIENTRYP PFNGLGETNAMEDBUFFERSUBDATAEXTPROC) (GLuint buffer, GLintptr offset, GLsizeiptr size, GLvoid *data); +typedef void (APIENTRYP PFNGLTEXTUREBUFFEREXTPROC) (GLuint texture, GLenum target, GLenum internalformat, GLuint buffer); +typedef void (APIENTRYP PFNGLMULTITEXBUFFEREXTPROC) (GLenum texunit, GLenum target, GLenum internalformat, GLuint buffer); +typedef void (APIENTRYP PFNGLNAMEDRENDERBUFFERSTORAGEEXTPROC) (GLuint renderbuffer, GLenum internalformat, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLGETNAMEDRENDERBUFFERPARAMETERIVEXTPROC) (GLuint renderbuffer, GLenum pname, GLint *params); +typedef GLenum (APIENTRYP PFNGLCHECKNAMEDFRAMEBUFFERSTATUSEXTPROC) (GLuint framebuffer, GLenum target); +typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURE1DEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURE2DEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level); +typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURE3DEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum textarget, GLuint texture, GLint level, GLint zoffset); +typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERRENDERBUFFEREXTPROC) (GLuint framebuffer, GLenum attachment, GLenum renderbuffertarget, GLuint renderbuffer); +typedef void (APIENTRYP PFNGLGETNAMEDFRAMEBUFFERATTACHMENTPARAMETERIVEXTPROC) (GLuint framebuffer, GLenum attachment, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGENERATETEXTUREMIPMAPEXTPROC) (GLuint texture, GLenum target); +typedef void (APIENTRYP PFNGLGENERATEMULTITEXMIPMAPEXTPROC) (GLenum texunit, GLenum target); +typedef void (APIENTRYP PFNGLFRAMEBUFFERDRAWBUFFEREXTPROC) (GLuint framebuffer, GLenum mode); +typedef void (APIENTRYP PFNGLFRAMEBUFFERDRAWBUFFERSEXTPROC) (GLuint framebuffer, GLsizei n, const GLenum *bufs); +typedef void (APIENTRYP PFNGLFRAMEBUFFERREADBUFFEREXTPROC) (GLuint framebuffer, GLenum mode); +typedef void (APIENTRYP PFNGLGETFRAMEBUFFERPARAMETERIVEXTPROC) (GLuint framebuffer, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLNAMEDRENDERBUFFERSTORAGEMULTISAMPLEEXTPROC) (GLuint renderbuffer, GLsizei samples, GLenum internalformat, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLNAMEDRENDERBUFFERSTORAGEMULTISAMPLECOVERAGEEXTPROC) (GLuint renderbuffer, GLsizei coverageSamples, GLsizei colorSamples, GLenum internalformat, GLsizei width, GLsizei height); +typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTUREEXTPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level); +typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTURELAYEREXTPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLint layer); +typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTUREFACEEXTPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLenum face); +typedef void (APIENTRYP PFNGLTEXTURERENDERBUFFEREXTPROC) (GLuint texture, GLenum target, GLuint renderbuffer); +typedef void (APIENTRYP PFNGLMULTITEXRENDERBUFFEREXTPROC) (GLenum texunit, GLenum target, GLuint renderbuffer); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DEXTPROC) (GLuint program, GLint location, GLdouble x); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DEXTPROC) (GLuint program, GLint location, GLdouble x, GLdouble y); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DEXTPROC) (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DEXTPROC) (GLuint program, GLint location, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4DVEXTPROC) (GLuint program, GLint location, GLsizei count, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X3DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX2X4DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X2DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX3X4DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X2DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMMATRIX4X3DVEXTPROC) (GLuint program, GLint location, GLsizei count, GLboolean transpose, const GLdouble *value); +#endif + +#ifndef GL_EXT_vertex_array_bgra +#define GL_EXT_vertex_array_bgra 1 +#endif + +#ifndef GL_EXT_texture_swizzle +#define GL_EXT_texture_swizzle 1 +#endif + +#ifndef GL_NV_explicit_multisample +#define GL_NV_explicit_multisample 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGetMultisamplefvNV (GLenum pname, GLuint index, GLfloat *val); +GLAPI void APIENTRY glSampleMaskIndexedNV (GLuint index, GLbitfield mask); +GLAPI void APIENTRY glTexRenderbufferNV (GLenum target, GLuint renderbuffer); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGETMULTISAMPLEFVNVPROC) (GLenum pname, GLuint index, GLfloat *val); +typedef void (APIENTRYP PFNGLSAMPLEMASKINDEXEDNVPROC) (GLuint index, GLbitfield mask); +typedef void (APIENTRYP PFNGLTEXRENDERBUFFERNVPROC) (GLenum target, GLuint renderbuffer); +#endif + +#ifndef GL_NV_transform_feedback2 +#define GL_NV_transform_feedback2 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBindTransformFeedbackNV (GLenum target, GLuint id); +GLAPI void APIENTRY glDeleteTransformFeedbacksNV (GLsizei n, const GLuint *ids); +GLAPI void APIENTRY glGenTransformFeedbacksNV (GLsizei n, GLuint *ids); +GLAPI GLboolean APIENTRY glIsTransformFeedbackNV (GLuint id); +GLAPI void APIENTRY glPauseTransformFeedbackNV (void); +GLAPI void APIENTRY glResumeTransformFeedbackNV (void); +GLAPI void APIENTRY glDrawTransformFeedbackNV (GLenum mode, GLuint id); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBINDTRANSFORMFEEDBACKNVPROC) (GLenum target, GLuint id); +typedef void (APIENTRYP PFNGLDELETETRANSFORMFEEDBACKSNVPROC) (GLsizei n, const GLuint *ids); +typedef void (APIENTRYP PFNGLGENTRANSFORMFEEDBACKSNVPROC) (GLsizei n, GLuint *ids); +typedef GLboolean (APIENTRYP PFNGLISTRANSFORMFEEDBACKNVPROC) (GLuint id); +typedef void (APIENTRYP PFNGLPAUSETRANSFORMFEEDBACKNVPROC) (void); +typedef void (APIENTRYP PFNGLRESUMETRANSFORMFEEDBACKNVPROC) (void); +typedef void (APIENTRYP PFNGLDRAWTRANSFORMFEEDBACKNVPROC) (GLenum mode, GLuint id); +#endif + +#ifndef GL_ATI_meminfo +#define GL_ATI_meminfo 1 +#endif + +#ifndef GL_AMD_performance_monitor +#define GL_AMD_performance_monitor 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGetPerfMonitorGroupsAMD (GLint *numGroups, GLsizei groupsSize, GLuint *groups); +GLAPI void APIENTRY glGetPerfMonitorCountersAMD (GLuint group, GLint *numCounters, GLint *maxActiveCounters, GLsizei counterSize, GLuint *counters); +GLAPI void APIENTRY glGetPerfMonitorGroupStringAMD (GLuint group, GLsizei bufSize, GLsizei *length, GLchar *groupString); +GLAPI void APIENTRY glGetPerfMonitorCounterStringAMD (GLuint group, GLuint counter, GLsizei bufSize, GLsizei *length, GLchar *counterString); +GLAPI void APIENTRY glGetPerfMonitorCounterInfoAMD (GLuint group, GLuint counter, GLenum pname, GLvoid *data); +GLAPI void APIENTRY glGenPerfMonitorsAMD (GLsizei n, GLuint *monitors); +GLAPI void APIENTRY glDeletePerfMonitorsAMD (GLsizei n, GLuint *monitors); +GLAPI void APIENTRY glSelectPerfMonitorCountersAMD (GLuint monitor, GLboolean enable, GLuint group, GLint numCounters, GLuint *counterList); +GLAPI void APIENTRY glBeginPerfMonitorAMD (GLuint monitor); +GLAPI void APIENTRY glEndPerfMonitorAMD (GLuint monitor); +GLAPI void APIENTRY glGetPerfMonitorCounterDataAMD (GLuint monitor, GLenum pname, GLsizei dataSize, GLuint *data, GLint *bytesWritten); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGETPERFMONITORGROUPSAMDPROC) (GLint *numGroups, GLsizei groupsSize, GLuint *groups); +typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERSAMDPROC) (GLuint group, GLint *numCounters, GLint *maxActiveCounters, GLsizei counterSize, GLuint *counters); +typedef void (APIENTRYP PFNGLGETPERFMONITORGROUPSTRINGAMDPROC) (GLuint group, GLsizei bufSize, GLsizei *length, GLchar *groupString); +typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERSTRINGAMDPROC) (GLuint group, GLuint counter, GLsizei bufSize, GLsizei *length, GLchar *counterString); +typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERINFOAMDPROC) (GLuint group, GLuint counter, GLenum pname, GLvoid *data); +typedef void (APIENTRYP PFNGLGENPERFMONITORSAMDPROC) (GLsizei n, GLuint *monitors); +typedef void (APIENTRYP PFNGLDELETEPERFMONITORSAMDPROC) (GLsizei n, GLuint *monitors); +typedef void (APIENTRYP PFNGLSELECTPERFMONITORCOUNTERSAMDPROC) (GLuint monitor, GLboolean enable, GLuint group, GLint numCounters, GLuint *counterList); +typedef void (APIENTRYP PFNGLBEGINPERFMONITORAMDPROC) (GLuint monitor); +typedef void (APIENTRYP PFNGLENDPERFMONITORAMDPROC) (GLuint monitor); +typedef void (APIENTRYP PFNGLGETPERFMONITORCOUNTERDATAAMDPROC) (GLuint monitor, GLenum pname, GLsizei dataSize, GLuint *data, GLint *bytesWritten); +#endif + +#ifndef GL_AMD_texture_texture4 +#define GL_AMD_texture_texture4 1 +#endif + +#ifndef GL_AMD_vertex_shader_tesselator +#define GL_AMD_vertex_shader_tesselator 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTessellationFactorAMD (GLfloat factor); +GLAPI void APIENTRY glTessellationModeAMD (GLenum mode); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTESSELLATIONFACTORAMDPROC) (GLfloat factor); +typedef void (APIENTRYP PFNGLTESSELLATIONMODEAMDPROC) (GLenum mode); +#endif + +#ifndef GL_EXT_provoking_vertex +#define GL_EXT_provoking_vertex 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glProvokingVertexEXT (GLenum mode); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPROVOKINGVERTEXEXTPROC) (GLenum mode); +#endif + +#ifndef GL_EXT_texture_snorm +#define GL_EXT_texture_snorm 1 +#endif + +#ifndef GL_AMD_draw_buffers_blend +#define GL_AMD_draw_buffers_blend 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBlendFuncIndexedAMD (GLuint buf, GLenum src, GLenum dst); +GLAPI void APIENTRY glBlendFuncSeparateIndexedAMD (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha); +GLAPI void APIENTRY glBlendEquationIndexedAMD (GLuint buf, GLenum mode); +GLAPI void APIENTRY glBlendEquationSeparateIndexedAMD (GLuint buf, GLenum modeRGB, GLenum modeAlpha); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBLENDFUNCINDEXEDAMDPROC) (GLuint buf, GLenum src, GLenum dst); +typedef void (APIENTRYP PFNGLBLENDFUNCSEPARATEINDEXEDAMDPROC) (GLuint buf, GLenum srcRGB, GLenum dstRGB, GLenum srcAlpha, GLenum dstAlpha); +typedef void (APIENTRYP PFNGLBLENDEQUATIONINDEXEDAMDPROC) (GLuint buf, GLenum mode); +typedef void (APIENTRYP PFNGLBLENDEQUATIONSEPARATEINDEXEDAMDPROC) (GLuint buf, GLenum modeRGB, GLenum modeAlpha); +#endif + +#ifndef GL_APPLE_texture_range +#define GL_APPLE_texture_range 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTextureRangeAPPLE (GLenum target, GLsizei length, const GLvoid *pointer); +GLAPI void APIENTRY glGetTexParameterPointervAPPLE (GLenum target, GLenum pname, GLvoid* *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXTURERANGEAPPLEPROC) (GLenum target, GLsizei length, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLGETTEXPARAMETERPOINTERVAPPLEPROC) (GLenum target, GLenum pname, GLvoid* *params); +#endif + +#ifndef GL_APPLE_float_pixels +#define GL_APPLE_float_pixels 1 +#endif + +#ifndef GL_APPLE_vertex_program_evaluators +#define GL_APPLE_vertex_program_evaluators 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glEnableVertexAttribAPPLE (GLuint index, GLenum pname); +GLAPI void APIENTRY glDisableVertexAttribAPPLE (GLuint index, GLenum pname); +GLAPI GLboolean APIENTRY glIsVertexAttribEnabledAPPLE (GLuint index, GLenum pname); +GLAPI void APIENTRY glMapVertexAttrib1dAPPLE (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint stride, GLint order, const GLdouble *points); +GLAPI void APIENTRY glMapVertexAttrib1fAPPLE (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint stride, GLint order, const GLfloat *points); +GLAPI void APIENTRY glMapVertexAttrib2dAPPLE (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, const GLdouble *points); +GLAPI void APIENTRY glMapVertexAttrib2fAPPLE (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, const GLfloat *points); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLENABLEVERTEXATTRIBAPPLEPROC) (GLuint index, GLenum pname); +typedef void (APIENTRYP PFNGLDISABLEVERTEXATTRIBAPPLEPROC) (GLuint index, GLenum pname); +typedef GLboolean (APIENTRYP PFNGLISVERTEXATTRIBENABLEDAPPLEPROC) (GLuint index, GLenum pname); +typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB1DAPPLEPROC) (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint stride, GLint order, const GLdouble *points); +typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB1FAPPLEPROC) (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint stride, GLint order, const GLfloat *points); +typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB2DAPPLEPROC) (GLuint index, GLuint size, GLdouble u1, GLdouble u2, GLint ustride, GLint uorder, GLdouble v1, GLdouble v2, GLint vstride, GLint vorder, const GLdouble *points); +typedef void (APIENTRYP PFNGLMAPVERTEXATTRIB2FAPPLEPROC) (GLuint index, GLuint size, GLfloat u1, GLfloat u2, GLint ustride, GLint uorder, GLfloat v1, GLfloat v2, GLint vstride, GLint vorder, const GLfloat *points); +#endif + +#ifndef GL_APPLE_aux_depth_stencil +#define GL_APPLE_aux_depth_stencil 1 +#endif + +#ifndef GL_APPLE_object_purgeable +#define GL_APPLE_object_purgeable 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI GLenum APIENTRY glObjectPurgeableAPPLE (GLenum objectType, GLuint name, GLenum option); +GLAPI GLenum APIENTRY glObjectUnpurgeableAPPLE (GLenum objectType, GLuint name, GLenum option); +GLAPI void APIENTRY glGetObjectParameterivAPPLE (GLenum objectType, GLuint name, GLenum pname, GLint *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef GLenum (APIENTRYP PFNGLOBJECTPURGEABLEAPPLEPROC) (GLenum objectType, GLuint name, GLenum option); +typedef GLenum (APIENTRYP PFNGLOBJECTUNPURGEABLEAPPLEPROC) (GLenum objectType, GLuint name, GLenum option); +typedef void (APIENTRYP PFNGLGETOBJECTPARAMETERIVAPPLEPROC) (GLenum objectType, GLuint name, GLenum pname, GLint *params); +#endif + +#ifndef GL_APPLE_row_bytes +#define GL_APPLE_row_bytes 1 +#endif + +#ifndef GL_APPLE_rgb_422 +#define GL_APPLE_rgb_422 1 +#endif + +#ifndef GL_NV_video_capture +#define GL_NV_video_capture 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBeginVideoCaptureNV (GLuint video_capture_slot); +GLAPI void APIENTRY glBindVideoCaptureStreamBufferNV (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLintptrARB offset); +GLAPI void APIENTRY glBindVideoCaptureStreamTextureNV (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLenum target, GLuint texture); +GLAPI void APIENTRY glEndVideoCaptureNV (GLuint video_capture_slot); +GLAPI void APIENTRY glGetVideoCaptureivNV (GLuint video_capture_slot, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetVideoCaptureStreamivNV (GLuint video_capture_slot, GLuint stream, GLenum pname, GLint *params); +GLAPI void APIENTRY glGetVideoCaptureStreamfvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, GLfloat *params); +GLAPI void APIENTRY glGetVideoCaptureStreamdvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, GLdouble *params); +GLAPI GLenum APIENTRY glVideoCaptureNV (GLuint video_capture_slot, GLuint *sequence_num, GLuint64EXT *capture_time); +GLAPI void APIENTRY glVideoCaptureStreamParameterivNV (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLint *params); +GLAPI void APIENTRY glVideoCaptureStreamParameterfvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLfloat *params); +GLAPI void APIENTRY glVideoCaptureStreamParameterdvNV (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLdouble *params); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBEGINVIDEOCAPTURENVPROC) (GLuint video_capture_slot); +typedef void (APIENTRYP PFNGLBINDVIDEOCAPTURESTREAMBUFFERNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLintptrARB offset); +typedef void (APIENTRYP PFNGLBINDVIDEOCAPTURESTREAMTEXTURENVPROC) (GLuint video_capture_slot, GLuint stream, GLenum frame_region, GLenum target, GLuint texture); +typedef void (APIENTRYP PFNGLENDVIDEOCAPTURENVPROC) (GLuint video_capture_slot); +typedef void (APIENTRYP PFNGLGETVIDEOCAPTUREIVNVPROC) (GLuint video_capture_slot, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETVIDEOCAPTURESTREAMIVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, GLint *params); +typedef void (APIENTRYP PFNGLGETVIDEOCAPTURESTREAMFVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, GLfloat *params); +typedef void (APIENTRYP PFNGLGETVIDEOCAPTURESTREAMDVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, GLdouble *params); +typedef GLenum (APIENTRYP PFNGLVIDEOCAPTURENVPROC) (GLuint video_capture_slot, GLuint *sequence_num, GLuint64EXT *capture_time); +typedef void (APIENTRYP PFNGLVIDEOCAPTURESTREAMPARAMETERIVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLint *params); +typedef void (APIENTRYP PFNGLVIDEOCAPTURESTREAMPARAMETERFVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLfloat *params); +typedef void (APIENTRYP PFNGLVIDEOCAPTURESTREAMPARAMETERDVNVPROC) (GLuint video_capture_slot, GLuint stream, GLenum pname, const GLdouble *params); +#endif + +#ifndef GL_NV_copy_image +#define GL_NV_copy_image 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glCopyImageSubDataNV (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei width, GLsizei height, GLsizei depth); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLCOPYIMAGESUBDATANVPROC) (GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei width, GLsizei height, GLsizei depth); +#endif + +#ifndef GL_EXT_separate_shader_objects +#define GL_EXT_separate_shader_objects 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glUseShaderProgramEXT (GLenum type, GLuint program); +GLAPI void APIENTRY glActiveProgramEXT (GLuint program); +GLAPI GLuint APIENTRY glCreateShaderProgramEXT (GLenum type, const GLchar *string); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLUSESHADERPROGRAMEXTPROC) (GLenum type, GLuint program); +typedef void (APIENTRYP PFNGLACTIVEPROGRAMEXTPROC) (GLuint program); +typedef GLuint (APIENTRYP PFNGLCREATESHADERPROGRAMEXTPROC) (GLenum type, const GLchar *string); +#endif + +#ifndef GL_NV_parameter_buffer_object2 +#define GL_NV_parameter_buffer_object2 1 +#endif + +#ifndef GL_NV_shader_buffer_load +#define GL_NV_shader_buffer_load 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glMakeBufferResidentNV (GLenum target, GLenum access); +GLAPI void APIENTRY glMakeBufferNonResidentNV (GLenum target); +GLAPI GLboolean APIENTRY glIsBufferResidentNV (GLenum target); +GLAPI void APIENTRY glMakeNamedBufferResidentNV (GLuint buffer, GLenum access); +GLAPI void APIENTRY glMakeNamedBufferNonResidentNV (GLuint buffer); +GLAPI GLboolean APIENTRY glIsNamedBufferResidentNV (GLuint buffer); +GLAPI void APIENTRY glGetBufferParameterui64vNV (GLenum target, GLenum pname, GLuint64EXT *params); +GLAPI void APIENTRY glGetNamedBufferParameterui64vNV (GLuint buffer, GLenum pname, GLuint64EXT *params); +GLAPI void APIENTRY glGetIntegerui64vNV (GLenum value, GLuint64EXT *result); +GLAPI void APIENTRY glUniformui64NV (GLint location, GLuint64EXT value); +GLAPI void APIENTRY glUniformui64vNV (GLint location, GLsizei count, const GLuint64EXT *value); +GLAPI void APIENTRY glGetUniformui64vNV (GLuint program, GLint location, GLuint64EXT *params); +GLAPI void APIENTRY glProgramUniformui64NV (GLuint program, GLint location, GLuint64EXT value); +GLAPI void APIENTRY glProgramUniformui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLMAKEBUFFERRESIDENTNVPROC) (GLenum target, GLenum access); +typedef void (APIENTRYP PFNGLMAKEBUFFERNONRESIDENTNVPROC) (GLenum target); +typedef GLboolean (APIENTRYP PFNGLISBUFFERRESIDENTNVPROC) (GLenum target); +typedef void (APIENTRYP PFNGLMAKENAMEDBUFFERRESIDENTNVPROC) (GLuint buffer, GLenum access); +typedef void (APIENTRYP PFNGLMAKENAMEDBUFFERNONRESIDENTNVPROC) (GLuint buffer); +typedef GLboolean (APIENTRYP PFNGLISNAMEDBUFFERRESIDENTNVPROC) (GLuint buffer); +typedef void (APIENTRYP PFNGLGETBUFFERPARAMETERUI64VNVPROC) (GLenum target, GLenum pname, GLuint64EXT *params); +typedef void (APIENTRYP PFNGLGETNAMEDBUFFERPARAMETERUI64VNVPROC) (GLuint buffer, GLenum pname, GLuint64EXT *params); +typedef void (APIENTRYP PFNGLGETINTEGERUI64VNVPROC) (GLenum value, GLuint64EXT *result); +typedef void (APIENTRYP PFNGLUNIFORMUI64NVPROC) (GLint location, GLuint64EXT value); +typedef void (APIENTRYP PFNGLUNIFORMUI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value); +typedef void (APIENTRYP PFNGLGETUNIFORMUI64VNVPROC) (GLuint program, GLint location, GLuint64EXT *params); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMUI64NVPROC) (GLuint program, GLint location, GLuint64EXT value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORMUI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value); +#endif + +#ifndef GL_NV_vertex_buffer_unified_memory +#define GL_NV_vertex_buffer_unified_memory 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBufferAddressRangeNV (GLenum pname, GLuint index, GLuint64EXT address, GLsizeiptr length); +GLAPI void APIENTRY glVertexFormatNV (GLint size, GLenum type, GLsizei stride); +GLAPI void APIENTRY glNormalFormatNV (GLenum type, GLsizei stride); +GLAPI void APIENTRY glColorFormatNV (GLint size, GLenum type, GLsizei stride); +GLAPI void APIENTRY glIndexFormatNV (GLenum type, GLsizei stride); +GLAPI void APIENTRY glTexCoordFormatNV (GLint size, GLenum type, GLsizei stride); +GLAPI void APIENTRY glEdgeFlagFormatNV (GLsizei stride); +GLAPI void APIENTRY glSecondaryColorFormatNV (GLint size, GLenum type, GLsizei stride); +GLAPI void APIENTRY glFogCoordFormatNV (GLenum type, GLsizei stride); +GLAPI void APIENTRY glVertexAttribFormatNV (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride); +GLAPI void APIENTRY glVertexAttribIFormatNV (GLuint index, GLint size, GLenum type, GLsizei stride); +GLAPI void APIENTRY glGetIntegerui64i_vNV (GLenum value, GLuint index, GLuint64EXT *result); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBUFFERADDRESSRANGENVPROC) (GLenum pname, GLuint index, GLuint64EXT address, GLsizeiptr length); +typedef void (APIENTRYP PFNGLVERTEXFORMATNVPROC) (GLint size, GLenum type, GLsizei stride); +typedef void (APIENTRYP PFNGLNORMALFORMATNVPROC) (GLenum type, GLsizei stride); +typedef void (APIENTRYP PFNGLCOLORFORMATNVPROC) (GLint size, GLenum type, GLsizei stride); +typedef void (APIENTRYP PFNGLINDEXFORMATNVPROC) (GLenum type, GLsizei stride); +typedef void (APIENTRYP PFNGLTEXCOORDFORMATNVPROC) (GLint size, GLenum type, GLsizei stride); +typedef void (APIENTRYP PFNGLEDGEFLAGFORMATNVPROC) (GLsizei stride); +typedef void (APIENTRYP PFNGLSECONDARYCOLORFORMATNVPROC) (GLint size, GLenum type, GLsizei stride); +typedef void (APIENTRYP PFNGLFOGCOORDFORMATNVPROC) (GLenum type, GLsizei stride); +typedef void (APIENTRYP PFNGLVERTEXATTRIBFORMATNVPROC) (GLuint index, GLint size, GLenum type, GLboolean normalized, GLsizei stride); +typedef void (APIENTRYP PFNGLVERTEXATTRIBIFORMATNVPROC) (GLuint index, GLint size, GLenum type, GLsizei stride); +typedef void (APIENTRYP PFNGLGETINTEGERUI64I_VNVPROC) (GLenum value, GLuint index, GLuint64EXT *result); +#endif + +#ifndef GL_NV_texture_barrier +#define GL_NV_texture_barrier 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glTextureBarrierNV (void); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLTEXTUREBARRIERNVPROC) (void); +#endif + +#ifndef GL_AMD_shader_stencil_export +#define GL_AMD_shader_stencil_export 1 +#endif + +#ifndef GL_AMD_seamless_cubemap_per_texture +#define GL_AMD_seamless_cubemap_per_texture 1 +#endif + +#ifndef GL_AMD_conservative_depth +#define GL_AMD_conservative_depth 1 +#endif + +#ifndef GL_EXT_shader_image_load_store +#define GL_EXT_shader_image_load_store 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glBindImageTextureEXT (GLuint index, GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum access, GLint format); +GLAPI void APIENTRY glMemoryBarrierEXT (GLbitfield barriers); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLBINDIMAGETEXTUREEXTPROC) (GLuint index, GLuint texture, GLint level, GLboolean layered, GLint layer, GLenum access, GLint format); +typedef void (APIENTRYP PFNGLMEMORYBARRIEREXTPROC) (GLbitfield barriers); +#endif + +#ifndef GL_EXT_vertex_attrib_64bit +#define GL_EXT_vertex_attrib_64bit 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexAttribL1dEXT (GLuint index, GLdouble x); +GLAPI void APIENTRY glVertexAttribL2dEXT (GLuint index, GLdouble x, GLdouble y); +GLAPI void APIENTRY glVertexAttribL3dEXT (GLuint index, GLdouble x, GLdouble y, GLdouble z); +GLAPI void APIENTRY glVertexAttribL4dEXT (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +GLAPI void APIENTRY glVertexAttribL1dvEXT (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribL2dvEXT (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribL3dvEXT (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribL4dvEXT (GLuint index, const GLdouble *v); +GLAPI void APIENTRY glVertexAttribLPointerEXT (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +GLAPI void APIENTRY glGetVertexAttribLdvEXT (GLuint index, GLenum pname, GLdouble *params); +GLAPI void APIENTRY glVertexArrayVertexAttribLOffsetEXT (GLuint vaobj, GLuint buffer, GLuint index, GLint size, GLenum type, GLsizei stride, GLintptr offset); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DEXTPROC) (GLuint index, GLdouble x); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DEXTPROC) (GLuint index, GLdouble x, GLdouble y); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DEXTPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DEXTPROC) (GLuint index, GLdouble x, GLdouble y, GLdouble z, GLdouble w); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL1DVEXTPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL2DVEXTPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL3DVEXTPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL4DVEXTPROC) (GLuint index, const GLdouble *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBLPOINTEREXTPROC) (GLuint index, GLint size, GLenum type, GLsizei stride, const GLvoid *pointer); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLDVEXTPROC) (GLuint index, GLenum pname, GLdouble *params); +typedef void (APIENTRYP PFNGLVERTEXARRAYVERTEXATTRIBLOFFSETEXTPROC) (GLuint vaobj, GLuint buffer, GLuint index, GLint size, GLenum type, GLsizei stride, GLintptr offset); +#endif + +#ifndef GL_NV_gpu_program5 +#define GL_NV_gpu_program5 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glProgramSubroutineParametersuivNV (GLenum target, GLsizei count, const GLuint *params); +GLAPI void APIENTRY glGetProgramSubroutineParameteruivNV (GLenum target, GLuint index, GLuint *param); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLPROGRAMSUBROUTINEPARAMETERSUIVNVPROC) (GLenum target, GLsizei count, const GLuint *params); +typedef void (APIENTRYP PFNGLGETPROGRAMSUBROUTINEPARAMETERUIVNVPROC) (GLenum target, GLuint index, GLuint *param); +#endif + +#ifndef GL_NV_gpu_shader5 +#define GL_NV_gpu_shader5 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glUniform1i64NV (GLint location, GLint64EXT x); +GLAPI void APIENTRY glUniform2i64NV (GLint location, GLint64EXT x, GLint64EXT y); +GLAPI void APIENTRY glUniform3i64NV (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z); +GLAPI void APIENTRY glUniform4i64NV (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w); +GLAPI void APIENTRY glUniform1i64vNV (GLint location, GLsizei count, const GLint64EXT *value); +GLAPI void APIENTRY glUniform2i64vNV (GLint location, GLsizei count, const GLint64EXT *value); +GLAPI void APIENTRY glUniform3i64vNV (GLint location, GLsizei count, const GLint64EXT *value); +GLAPI void APIENTRY glUniform4i64vNV (GLint location, GLsizei count, const GLint64EXT *value); +GLAPI void APIENTRY glUniform1ui64NV (GLint location, GLuint64EXT x); +GLAPI void APIENTRY glUniform2ui64NV (GLint location, GLuint64EXT x, GLuint64EXT y); +GLAPI void APIENTRY glUniform3ui64NV (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z); +GLAPI void APIENTRY glUniform4ui64NV (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w); +GLAPI void APIENTRY glUniform1ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value); +GLAPI void APIENTRY glUniform2ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value); +GLAPI void APIENTRY glUniform3ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value); +GLAPI void APIENTRY glUniform4ui64vNV (GLint location, GLsizei count, const GLuint64EXT *value); +GLAPI void APIENTRY glGetUniformi64vNV (GLuint program, GLint location, GLint64EXT *params); +GLAPI void APIENTRY glProgramUniform1i64NV (GLuint program, GLint location, GLint64EXT x); +GLAPI void APIENTRY glProgramUniform2i64NV (GLuint program, GLint location, GLint64EXT x, GLint64EXT y); +GLAPI void APIENTRY glProgramUniform3i64NV (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z); +GLAPI void APIENTRY glProgramUniform4i64NV (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w); +GLAPI void APIENTRY glProgramUniform1i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value); +GLAPI void APIENTRY glProgramUniform2i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value); +GLAPI void APIENTRY glProgramUniform3i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value); +GLAPI void APIENTRY glProgramUniform4i64vNV (GLuint program, GLint location, GLsizei count, const GLint64EXT *value); +GLAPI void APIENTRY glProgramUniform1ui64NV (GLuint program, GLint location, GLuint64EXT x); +GLAPI void APIENTRY glProgramUniform2ui64NV (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y); +GLAPI void APIENTRY glProgramUniform3ui64NV (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z); +GLAPI void APIENTRY glProgramUniform4ui64NV (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w); +GLAPI void APIENTRY glProgramUniform1ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value); +GLAPI void APIENTRY glProgramUniform2ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value); +GLAPI void APIENTRY glProgramUniform3ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value); +GLAPI void APIENTRY glProgramUniform4ui64vNV (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLUNIFORM1I64NVPROC) (GLint location, GLint64EXT x); +typedef void (APIENTRYP PFNGLUNIFORM2I64NVPROC) (GLint location, GLint64EXT x, GLint64EXT y); +typedef void (APIENTRYP PFNGLUNIFORM3I64NVPROC) (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z); +typedef void (APIENTRYP PFNGLUNIFORM4I64NVPROC) (GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w); +typedef void (APIENTRYP PFNGLUNIFORM1I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value); +typedef void (APIENTRYP PFNGLUNIFORM2I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value); +typedef void (APIENTRYP PFNGLUNIFORM3I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value); +typedef void (APIENTRYP PFNGLUNIFORM4I64VNVPROC) (GLint location, GLsizei count, const GLint64EXT *value); +typedef void (APIENTRYP PFNGLUNIFORM1UI64NVPROC) (GLint location, GLuint64EXT x); +typedef void (APIENTRYP PFNGLUNIFORM2UI64NVPROC) (GLint location, GLuint64EXT x, GLuint64EXT y); +typedef void (APIENTRYP PFNGLUNIFORM3UI64NVPROC) (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z); +typedef void (APIENTRYP PFNGLUNIFORM4UI64NVPROC) (GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w); +typedef void (APIENTRYP PFNGLUNIFORM1UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value); +typedef void (APIENTRYP PFNGLUNIFORM2UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value); +typedef void (APIENTRYP PFNGLUNIFORM3UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value); +typedef void (APIENTRYP PFNGLUNIFORM4UI64VNVPROC) (GLint location, GLsizei count, const GLuint64EXT *value); +typedef void (APIENTRYP PFNGLGETUNIFORMI64VNVPROC) (GLuint program, GLint location, GLint64EXT *params); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1I64NVPROC) (GLuint program, GLint location, GLint64EXT x); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2I64NVPROC) (GLuint program, GLint location, GLint64EXT x, GLint64EXT y); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3I64NVPROC) (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4I64NVPROC) (GLuint program, GLint location, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4I64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLint64EXT *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UI64NVPROC) (GLuint program, GLint location, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM1UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM2UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM3UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value); +typedef void (APIENTRYP PFNGLPROGRAMUNIFORM4UI64VNVPROC) (GLuint program, GLint location, GLsizei count, const GLuint64EXT *value); +#endif + +#ifndef GL_NV_shader_buffer_store +#define GL_NV_shader_buffer_store 1 +#endif + +#ifndef GL_NV_tessellation_program5 +#define GL_NV_tessellation_program5 1 +#endif + +#ifndef GL_NV_vertex_attrib_integer_64bit +#define GL_NV_vertex_attrib_integer_64bit 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVertexAttribL1i64NV (GLuint index, GLint64EXT x); +GLAPI void APIENTRY glVertexAttribL2i64NV (GLuint index, GLint64EXT x, GLint64EXT y); +GLAPI void APIENTRY glVertexAttribL3i64NV (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z); +GLAPI void APIENTRY glVertexAttribL4i64NV (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w); +GLAPI void APIENTRY glVertexAttribL1i64vNV (GLuint index, const GLint64EXT *v); +GLAPI void APIENTRY glVertexAttribL2i64vNV (GLuint index, const GLint64EXT *v); +GLAPI void APIENTRY glVertexAttribL3i64vNV (GLuint index, const GLint64EXT *v); +GLAPI void APIENTRY glVertexAttribL4i64vNV (GLuint index, const GLint64EXT *v); +GLAPI void APIENTRY glVertexAttribL1ui64NV (GLuint index, GLuint64EXT x); +GLAPI void APIENTRY glVertexAttribL2ui64NV (GLuint index, GLuint64EXT x, GLuint64EXT y); +GLAPI void APIENTRY glVertexAttribL3ui64NV (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z); +GLAPI void APIENTRY glVertexAttribL4ui64NV (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w); +GLAPI void APIENTRY glVertexAttribL1ui64vNV (GLuint index, const GLuint64EXT *v); +GLAPI void APIENTRY glVertexAttribL2ui64vNV (GLuint index, const GLuint64EXT *v); +GLAPI void APIENTRY glVertexAttribL3ui64vNV (GLuint index, const GLuint64EXT *v); +GLAPI void APIENTRY glVertexAttribL4ui64vNV (GLuint index, const GLuint64EXT *v); +GLAPI void APIENTRY glGetVertexAttribLi64vNV (GLuint index, GLenum pname, GLint64EXT *params); +GLAPI void APIENTRY glGetVertexAttribLui64vNV (GLuint index, GLenum pname, GLuint64EXT *params); +GLAPI void APIENTRY glVertexAttribLFormatNV (GLuint index, GLint size, GLenum type, GLsizei stride); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVERTEXATTRIBL1I64NVPROC) (GLuint index, GLint64EXT x); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL2I64NVPROC) (GLuint index, GLint64EXT x, GLint64EXT y); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL3I64NVPROC) (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL4I64NVPROC) (GLuint index, GLint64EXT x, GLint64EXT y, GLint64EXT z, GLint64EXT w); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL1I64VNVPROC) (GLuint index, const GLint64EXT *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL2I64VNVPROC) (GLuint index, const GLint64EXT *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL3I64VNVPROC) (GLuint index, const GLint64EXT *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL4I64VNVPROC) (GLuint index, const GLint64EXT *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL1UI64NVPROC) (GLuint index, GLuint64EXT x); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL2UI64NVPROC) (GLuint index, GLuint64EXT x, GLuint64EXT y); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL3UI64NVPROC) (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL4UI64NVPROC) (GLuint index, GLuint64EXT x, GLuint64EXT y, GLuint64EXT z, GLuint64EXT w); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL1UI64VNVPROC) (GLuint index, const GLuint64EXT *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL2UI64VNVPROC) (GLuint index, const GLuint64EXT *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL3UI64VNVPROC) (GLuint index, const GLuint64EXT *v); +typedef void (APIENTRYP PFNGLVERTEXATTRIBL4UI64VNVPROC) (GLuint index, const GLuint64EXT *v); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLI64VNVPROC) (GLuint index, GLenum pname, GLint64EXT *params); +typedef void (APIENTRYP PFNGLGETVERTEXATTRIBLUI64VNVPROC) (GLuint index, GLenum pname, GLuint64EXT *params); +typedef void (APIENTRYP PFNGLVERTEXATTRIBLFORMATNVPROC) (GLuint index, GLint size, GLenum type, GLsizei stride); +#endif + +#ifndef GL_NV_multisample_coverage +#define GL_NV_multisample_coverage 1 +#endif + +#ifndef GL_AMD_name_gen_delete +#define GL_AMD_name_gen_delete 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glGenNamesAMD (GLenum identifier, GLuint num, GLuint *names); +GLAPI void APIENTRY glDeleteNamesAMD (GLenum identifier, GLuint num, const GLuint *names); +GLAPI GLboolean APIENTRY glIsNameAMD (GLenum identifier, GLuint name); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLGENNAMESAMDPROC) (GLenum identifier, GLuint num, GLuint *names); +typedef void (APIENTRYP PFNGLDELETENAMESAMDPROC) (GLenum identifier, GLuint num, const GLuint *names); +typedef GLboolean (APIENTRYP PFNGLISNAMEAMDPROC) (GLenum identifier, GLuint name); +#endif + +#ifndef GL_AMD_debug_output +#define GL_AMD_debug_output 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glDebugMessageEnableAMD (GLenum category, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled); +GLAPI void APIENTRY glDebugMessageInsertAMD (GLenum category, GLenum severity, GLuint id, GLsizei length, const GLchar *buf); +GLAPI void APIENTRY glDebugMessageCallbackAMD (GLDEBUGPROCAMD callback, GLvoid *userParam); +GLAPI GLuint APIENTRY glGetDebugMessageLogAMD (GLuint count, GLsizei bufsize, GLenum *categories, GLuint *severities, GLuint *ids, GLsizei *lengths, GLchar *message); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLDEBUGMESSAGEENABLEAMDPROC) (GLenum category, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled); +typedef void (APIENTRYP PFNGLDEBUGMESSAGEINSERTAMDPROC) (GLenum category, GLenum severity, GLuint id, GLsizei length, const GLchar *buf); +typedef void (APIENTRYP PFNGLDEBUGMESSAGECALLBACKAMDPROC) (GLDEBUGPROCAMD callback, GLvoid *userParam); +typedef GLuint (APIENTRYP PFNGLGETDEBUGMESSAGELOGAMDPROC) (GLuint count, GLsizei bufsize, GLenum *categories, GLuint *severities, GLuint *ids, GLsizei *lengths, GLchar *message); +#endif + +#ifndef GL_NV_vdpau_interop +#define GL_NV_vdpau_interop 1 +#ifdef GL_GLEXT_PROTOTYPES +GLAPI void APIENTRY glVDPAUInitNV (const GLvoid *vdpDevice, const GLvoid *getProcAddress); +GLAPI void APIENTRY glVDPAUFiniNV (void); +GLAPI GLvdpauSurfaceNV APIENTRY glVDPAURegisterVideoSurfaceNV (GLvoid *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames); +GLAPI GLvdpauSurfaceNV APIENTRY glVDPAURegisterOutputSurfaceNV (GLvoid *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames); +GLAPI void APIENTRY glVDPAUIsSurfaceNV (GLvdpauSurfaceNV surface); +GLAPI void APIENTRY glVDPAUUnregisterSurfaceNV (GLvdpauSurfaceNV surface); +GLAPI void APIENTRY glVDPAUGetSurfaceivNV (GLvdpauSurfaceNV surface, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values); +GLAPI void APIENTRY glVDPAUSurfaceAccessNV (GLvdpauSurfaceNV surface, GLenum access); +GLAPI void APIENTRY glVDPAUMapSurfacesNV (GLsizei numSurfaces, const GLvdpauSurfaceNV *surfaces); +GLAPI void APIENTRY glVDPAUUnmapSurfacesNV (GLsizei numSurface, const GLvdpauSurfaceNV *surfaces); +#endif /* GL_GLEXT_PROTOTYPES */ +typedef void (APIENTRYP PFNGLVDPAUINITNVPROC) (const GLvoid *vdpDevice, const GLvoid *getProcAddress); +typedef void (APIENTRYP PFNGLVDPAUFININVPROC) (void); +typedef GLvdpauSurfaceNV (APIENTRYP PFNGLVDPAUREGISTERVIDEOSURFACENVPROC) (GLvoid *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames); +typedef GLvdpauSurfaceNV (APIENTRYP PFNGLVDPAUREGISTEROUTPUTSURFACENVPROC) (GLvoid *vdpSurface, GLenum target, GLsizei numTextureNames, const GLuint *textureNames); +typedef void (APIENTRYP PFNGLVDPAUISSURFACENVPROC) (GLvdpauSurfaceNV surface); +typedef void (APIENTRYP PFNGLVDPAUUNREGISTERSURFACENVPROC) (GLvdpauSurfaceNV surface); +typedef void (APIENTRYP PFNGLVDPAUGETSURFACEIVNVPROC) (GLvdpauSurfaceNV surface, GLenum pname, GLsizei bufSize, GLsizei *length, GLint *values); +typedef void (APIENTRYP PFNGLVDPAUSURFACEACCESSNVPROC) (GLvdpauSurfaceNV surface, GLenum access); +typedef void (APIENTRYP PFNGLVDPAUMAPSURFACESNVPROC) (GLsizei numSurfaces, const GLvdpauSurfaceNV *surfaces); +typedef void (APIENTRYP PFNGLVDPAUUNMAPSURFACESNVPROC) (GLsizei numSurface, const GLvdpauSurfaceNV *surfaces); +#endif + +#ifndef GL_AMD_transform_feedback3_lines_triangles +#define GL_AMD_transform_feedback3_lines_triangles 1 +#endif + + +#ifdef __cplusplus +} +#endif + +#endif +#endif /* NO_SDL_GLEXT */ + +#endif /* !__IPHONEOS__ */ + +#endif /* _SDL_opengl_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_opengles.h b/src/SDL2/SDL_opengles.h new file mode 100644 index 000000000..00e60f5c1 --- /dev/null +++ b/src/SDL2/SDL_opengles.h @@ -0,0 +1,38 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_opengles.h + * + * This is a simple file to encapsulate the OpenGL ES 1.X API headers. + */ + +#ifdef __IPHONEOS__ +#include +#include +#else +#include +#include +#endif + +#ifndef APIENTRY +#define APIENTRY +#endif diff --git a/src/SDL2/SDL_opengles2.h b/src/SDL2/SDL_opengles2.h new file mode 100644 index 000000000..7697626f4 --- /dev/null +++ b/src/SDL2/SDL_opengles2.h @@ -0,0 +1,38 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_opengles.h + * + * This is a simple file to encapsulate the OpenGL ES 2.0 API headers. + */ + +#ifdef __IPHONEOS__ +#include +#include +#else +#include +#include +#endif + +#ifndef APIENTRY +#define APIENTRY +#endif diff --git a/src/SDL2/SDL_pixels.h b/src/SDL2/SDL_pixels.h new file mode 100644 index 000000000..5e17cba53 --- /dev/null +++ b/src/SDL2/SDL_pixels.h @@ -0,0 +1,427 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_pixels.h + * + * Header for the enumerated pixel format definitions. + */ + +#ifndef _SDL_pixels_h +#define _SDL_pixels_h + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \name Transparency definitions + * + * These define alpha as the opacity of a surface. + */ +/*@{*/ +#define SDL_ALPHA_OPAQUE 255 +#define SDL_ALPHA_TRANSPARENT 0 +/*@}*/ + +/** Pixel type. */ +enum +{ + SDL_PIXELTYPE_UNKNOWN, + SDL_PIXELTYPE_INDEX1, + SDL_PIXELTYPE_INDEX4, + SDL_PIXELTYPE_INDEX8, + SDL_PIXELTYPE_PACKED8, + SDL_PIXELTYPE_PACKED16, + SDL_PIXELTYPE_PACKED32, + SDL_PIXELTYPE_ARRAYU8, + SDL_PIXELTYPE_ARRAYU16, + SDL_PIXELTYPE_ARRAYU32, + SDL_PIXELTYPE_ARRAYF16, + SDL_PIXELTYPE_ARRAYF32 +}; + +/** Bitmap pixel order, high bit -> low bit. */ +enum +{ + SDL_BITMAPORDER_NONE, + SDL_BITMAPORDER_4321, + SDL_BITMAPORDER_1234 +}; + +/** Packed component order, high bit -> low bit. */ +enum +{ + SDL_PACKEDORDER_NONE, + SDL_PACKEDORDER_XRGB, + SDL_PACKEDORDER_RGBX, + SDL_PACKEDORDER_ARGB, + SDL_PACKEDORDER_RGBA, + SDL_PACKEDORDER_XBGR, + SDL_PACKEDORDER_BGRX, + SDL_PACKEDORDER_ABGR, + SDL_PACKEDORDER_BGRA +}; + +/** Array component order, low byte -> high byte. */ +enum +{ + SDL_ARRAYORDER_NONE, + SDL_ARRAYORDER_RGB, + SDL_ARRAYORDER_RGBA, + SDL_ARRAYORDER_ARGB, + SDL_ARRAYORDER_BGR, + SDL_ARRAYORDER_BGRA, + SDL_ARRAYORDER_ABGR +}; + +/** Packed component layout. */ +enum +{ + SDL_PACKEDLAYOUT_NONE, + SDL_PACKEDLAYOUT_332, + SDL_PACKEDLAYOUT_4444, + SDL_PACKEDLAYOUT_1555, + SDL_PACKEDLAYOUT_5551, + SDL_PACKEDLAYOUT_565, + SDL_PACKEDLAYOUT_8888, + SDL_PACKEDLAYOUT_2101010, + SDL_PACKEDLAYOUT_1010102 +}; + +#define SDL_DEFINE_PIXELFOURCC(A, B, C, D) SDL_FOURCC(A, B, C, D) + +#define SDL_DEFINE_PIXELFORMAT(type, order, layout, bits, bytes) \ + ((1 << 28) | ((type) << 24) | ((order) << 20) | ((layout) << 16) | \ + ((bits) << 8) | ((bytes) << 0)) + +#define SDL_PIXELFLAG(X) (((X) >> 28) & 0x0F) +#define SDL_PIXELTYPE(X) (((X) >> 24) & 0x0F) +#define SDL_PIXELORDER(X) (((X) >> 20) & 0x0F) +#define SDL_PIXELLAYOUT(X) (((X) >> 16) & 0x0F) +#define SDL_BITSPERPIXEL(X) (((X) >> 8) & 0xFF) +#define SDL_BYTESPERPIXEL(X) \ + (SDL_ISPIXELFORMAT_FOURCC(X) ? \ + ((((X) == SDL_PIXELFORMAT_YUY2) || \ + ((X) == SDL_PIXELFORMAT_UYVY) || \ + ((X) == SDL_PIXELFORMAT_YVYU)) ? 2 : 1) : (((X) >> 0) & 0xFF)) + +#define SDL_ISPIXELFORMAT_INDEXED(format) \ + (!SDL_ISPIXELFORMAT_FOURCC(format) && \ + ((SDL_PIXELTYPE(format) == SDL_PIXELTYPE_INDEX1) || \ + (SDL_PIXELTYPE(format) == SDL_PIXELTYPE_INDEX4) || \ + (SDL_PIXELTYPE(format) == SDL_PIXELTYPE_INDEX8))) + +#define SDL_ISPIXELFORMAT_ALPHA(format) \ + (!SDL_ISPIXELFORMAT_FOURCC(format) && \ + ((SDL_PIXELORDER(format) == SDL_PACKEDORDER_ARGB) || \ + (SDL_PIXELORDER(format) == SDL_PACKEDORDER_RGBA) || \ + (SDL_PIXELORDER(format) == SDL_PACKEDORDER_ABGR) || \ + (SDL_PIXELORDER(format) == SDL_PACKEDORDER_BGRA))) + +/* The flag is set to 1 because 0x1? is not in the printable ASCII range */ +#define SDL_ISPIXELFORMAT_FOURCC(format) \ + ((format) && (SDL_PIXELFLAG(format) != 1)) + +/* Note: If you modify this list, update SDL_GetPixelFormatName() */ +enum +{ + SDL_PIXELFORMAT_UNKNOWN, + SDL_PIXELFORMAT_INDEX1LSB = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_INDEX1, SDL_BITMAPORDER_4321, 0, + 1, 0), + SDL_PIXELFORMAT_INDEX1MSB = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_INDEX1, SDL_BITMAPORDER_1234, 0, + 1, 0), + SDL_PIXELFORMAT_INDEX4LSB = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_INDEX4, SDL_BITMAPORDER_4321, 0, + 4, 0), + SDL_PIXELFORMAT_INDEX4MSB = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_INDEX4, SDL_BITMAPORDER_1234, 0, + 4, 0), + SDL_PIXELFORMAT_INDEX8 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_INDEX8, 0, 0, 8, 1), + SDL_PIXELFORMAT_RGB332 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED8, SDL_PACKEDORDER_XRGB, + SDL_PACKEDLAYOUT_332, 8, 1), + SDL_PIXELFORMAT_RGB444 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_XRGB, + SDL_PACKEDLAYOUT_4444, 12, 2), + SDL_PIXELFORMAT_RGB555 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_XRGB, + SDL_PACKEDLAYOUT_1555, 15, 2), + SDL_PIXELFORMAT_BGR555 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_XBGR, + SDL_PACKEDLAYOUT_1555, 15, 2), + SDL_PIXELFORMAT_ARGB4444 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_ARGB, + SDL_PACKEDLAYOUT_4444, 16, 2), + SDL_PIXELFORMAT_RGBA4444 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_RGBA, + SDL_PACKEDLAYOUT_4444, 16, 2), + SDL_PIXELFORMAT_ABGR4444 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_ABGR, + SDL_PACKEDLAYOUT_4444, 16, 2), + SDL_PIXELFORMAT_BGRA4444 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_BGRA, + SDL_PACKEDLAYOUT_4444, 16, 2), + SDL_PIXELFORMAT_ARGB1555 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_ARGB, + SDL_PACKEDLAYOUT_1555, 16, 2), + SDL_PIXELFORMAT_RGBA5551 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_RGBA, + SDL_PACKEDLAYOUT_5551, 16, 2), + SDL_PIXELFORMAT_ABGR1555 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_ABGR, + SDL_PACKEDLAYOUT_1555, 16, 2), + SDL_PIXELFORMAT_BGRA5551 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_BGRA, + SDL_PACKEDLAYOUT_5551, 16, 2), + SDL_PIXELFORMAT_RGB565 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_XRGB, + SDL_PACKEDLAYOUT_565, 16, 2), + SDL_PIXELFORMAT_BGR565 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED16, SDL_PACKEDORDER_XBGR, + SDL_PACKEDLAYOUT_565, 16, 2), + SDL_PIXELFORMAT_RGB24 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_ARRAYU8, SDL_ARRAYORDER_RGB, 0, + 24, 3), + SDL_PIXELFORMAT_BGR24 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_ARRAYU8, SDL_ARRAYORDER_BGR, 0, + 24, 3), + SDL_PIXELFORMAT_RGB888 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED32, SDL_PACKEDORDER_XRGB, + SDL_PACKEDLAYOUT_8888, 24, 4), + SDL_PIXELFORMAT_RGBX8888 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED32, SDL_PACKEDORDER_RGBX, + SDL_PACKEDLAYOUT_8888, 24, 4), + SDL_PIXELFORMAT_BGR888 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED32, SDL_PACKEDORDER_XBGR, + SDL_PACKEDLAYOUT_8888, 24, 4), + SDL_PIXELFORMAT_BGRX8888 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED32, SDL_PACKEDORDER_BGRX, + SDL_PACKEDLAYOUT_8888, 24, 4), + SDL_PIXELFORMAT_ARGB8888 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED32, SDL_PACKEDORDER_ARGB, + SDL_PACKEDLAYOUT_8888, 32, 4), + SDL_PIXELFORMAT_RGBA8888 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED32, SDL_PACKEDORDER_RGBA, + SDL_PACKEDLAYOUT_8888, 32, 4), + SDL_PIXELFORMAT_ABGR8888 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED32, SDL_PACKEDORDER_ABGR, + SDL_PACKEDLAYOUT_8888, 32, 4), + SDL_PIXELFORMAT_BGRA8888 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED32, SDL_PACKEDORDER_BGRA, + SDL_PACKEDLAYOUT_8888, 32, 4), + SDL_PIXELFORMAT_ARGB2101010 = + SDL_DEFINE_PIXELFORMAT(SDL_PIXELTYPE_PACKED32, SDL_PACKEDORDER_ARGB, + SDL_PACKEDLAYOUT_2101010, 32, 4), + + SDL_PIXELFORMAT_YV12 = /**< Planar mode: Y + V + U (3 planes) */ + SDL_DEFINE_PIXELFOURCC('Y', 'V', '1', '2'), + SDL_PIXELFORMAT_IYUV = /**< Planar mode: Y + U + V (3 planes) */ + SDL_DEFINE_PIXELFOURCC('I', 'Y', 'U', 'V'), + SDL_PIXELFORMAT_YUY2 = /**< Packed mode: Y0+U0+Y1+V0 (1 plane) */ + SDL_DEFINE_PIXELFOURCC('Y', 'U', 'Y', '2'), + SDL_PIXELFORMAT_UYVY = /**< Packed mode: U0+Y0+V0+Y1 (1 plane) */ + SDL_DEFINE_PIXELFOURCC('U', 'Y', 'V', 'Y'), + SDL_PIXELFORMAT_YVYU = /**< Packed mode: Y0+V0+Y1+U0 (1 plane) */ + SDL_DEFINE_PIXELFOURCC('Y', 'V', 'Y', 'U') +}; + +typedef struct SDL_Color +{ + Uint8 r; + Uint8 g; + Uint8 b; + Uint8 a; +} SDL_Color; +#define SDL_Colour SDL_Color + +typedef struct SDL_Palette +{ + int ncolors; + SDL_Color *colors; + Uint32 version; + int refcount; +} SDL_Palette; + +/** + * \note Everything in the pixel format structure is read-only. + */ +typedef struct SDL_PixelFormat +{ + Uint32 format; + SDL_Palette *palette; + Uint8 BitsPerPixel; + Uint8 BytesPerPixel; + Uint8 padding[2]; + Uint32 Rmask; + Uint32 Gmask; + Uint32 Bmask; + Uint32 Amask; + Uint8 Rloss; + Uint8 Gloss; + Uint8 Bloss; + Uint8 Aloss; + Uint8 Rshift; + Uint8 Gshift; + Uint8 Bshift; + Uint8 Ashift; + int refcount; + struct SDL_PixelFormat *next; +} SDL_PixelFormat; + +/** + * \brief Get the human readable name of a pixel format + */ +extern DECLSPEC const char* SDLCALL SDL_GetPixelFormatName(Uint32 format); + +/** + * \brief Convert one of the enumerated pixel formats to a bpp and RGBA masks. + * + * \return SDL_TRUE, or SDL_FALSE if the conversion wasn't possible. + * + * \sa SDL_MasksToPixelFormatEnum() + */ +extern DECLSPEC SDL_bool SDLCALL SDL_PixelFormatEnumToMasks(Uint32 format, + int *bpp, + Uint32 * Rmask, + Uint32 * Gmask, + Uint32 * Bmask, + Uint32 * Amask); + +/** + * \brief Convert a bpp and RGBA masks to an enumerated pixel format. + * + * \return The pixel format, or ::SDL_PIXELFORMAT_UNKNOWN if the conversion + * wasn't possible. + * + * \sa SDL_PixelFormatEnumToMasks() + */ +extern DECLSPEC Uint32 SDLCALL SDL_MasksToPixelFormatEnum(int bpp, + Uint32 Rmask, + Uint32 Gmask, + Uint32 Bmask, + Uint32 Amask); + +/** + * \brief Create an SDL_PixelFormat structure from a pixel format enum. + */ +extern DECLSPEC SDL_PixelFormat * SDLCALL SDL_AllocFormat(Uint32 pixel_format); + +/** + * \brief Free an SDL_PixelFormat structure. + */ +extern DECLSPEC void SDLCALL SDL_FreeFormat(SDL_PixelFormat *format); + +/** + * \brief Create a palette structure with the specified number of color + * entries. + * + * \return A new palette, or NULL if there wasn't enough memory. + * + * \note The palette entries are initialized to white. + * + * \sa SDL_FreePalette() + */ +extern DECLSPEC SDL_Palette *SDLCALL SDL_AllocPalette(int ncolors); + +/** + * \brief Set the palette for a pixel format structure. + */ +extern DECLSPEC int SDLCALL SDL_SetPixelFormatPalette(SDL_PixelFormat * format, + SDL_Palette *palette); + +/** + * \brief Set a range of colors in a palette. + * + * \param palette The palette to modify. + * \param colors An array of colors to copy into the palette. + * \param firstcolor The index of the first palette entry to modify. + * \param ncolors The number of entries to modify. + * + * \return 0 on success, or -1 if not all of the colors could be set. + */ +extern DECLSPEC int SDLCALL SDL_SetPaletteColors(SDL_Palette * palette, + const SDL_Color * colors, + int firstcolor, int ncolors); + +/** + * \brief Free a palette created with SDL_AllocPalette(). + * + * \sa SDL_AllocPalette() + */ +extern DECLSPEC void SDLCALL SDL_FreePalette(SDL_Palette * palette); + +/** + * \brief Maps an RGB triple to an opaque pixel value for a given pixel format. + * + * \sa SDL_MapRGBA + */ +extern DECLSPEC Uint32 SDLCALL SDL_MapRGB(const SDL_PixelFormat * format, + Uint8 r, Uint8 g, Uint8 b); + +/** + * \brief Maps an RGBA quadruple to a pixel value for a given pixel format. + * + * \sa SDL_MapRGB + */ +extern DECLSPEC Uint32 SDLCALL SDL_MapRGBA(const SDL_PixelFormat * format, + Uint8 r, Uint8 g, Uint8 b, + Uint8 a); + +/** + * \brief Get the RGB components from a pixel of the specified format. + * + * \sa SDL_GetRGBA + */ +extern DECLSPEC void SDLCALL SDL_GetRGB(Uint32 pixel, + const SDL_PixelFormat * format, + Uint8 * r, Uint8 * g, Uint8 * b); + +/** + * \brief Get the RGBA components from a pixel of the specified format. + * + * \sa SDL_GetRGB + */ +extern DECLSPEC void SDLCALL SDL_GetRGBA(Uint32 pixel, + const SDL_PixelFormat * format, + Uint8 * r, Uint8 * g, Uint8 * b, + Uint8 * a); + +/** + * \brief Calculate a 256 entry gamma ramp for a gamma value. + */ +extern DECLSPEC void SDLCALL SDL_CalculateGammaRamp(float gamma, Uint16 * ramp); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_pixels_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_platform.h b/src/SDL2/SDL_platform.h new file mode 100644 index 000000000..1e8e0d9f4 --- /dev/null +++ b/src/SDL2/SDL_platform.h @@ -0,0 +1,151 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_platform.h + * + * Try to get a standard set of platform defines. + */ + +#ifndef _SDL_platform_h +#define _SDL_platform_h + +#if defined(_AIX) +#undef __AIX__ +#define __AIX__ 1 +#endif +#if defined(__BEOS__) +#undef __BEOS__ +#define __BEOS__ 1 +#endif +#if defined(__HAIKU__) +#undef __HAIKU__ +#define __HAIKU__ 1 +#endif +#if defined(bsdi) || defined(__bsdi) || defined(__bsdi__) +#undef __BSDI__ +#define __BSDI__ 1 +#endif +#if defined(_arch_dreamcast) +#undef __DREAMCAST__ +#define __DREAMCAST__ 1 +#endif +#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) +#undef __FREEBSD__ +#define __FREEBSD__ 1 +#endif +#if defined(hpux) || defined(__hpux) || defined(__hpux__) +#undef __HPUX__ +#define __HPUX__ 1 +#endif +#if defined(sgi) || defined(__sgi) || defined(__sgi__) || defined(_SGI_SOURCE) +#undef __IRIX__ +#define __IRIX__ 1 +#endif +#if defined(linux) || defined(__linux) || defined(__linux__) +#undef __LINUX__ +#define __LINUX__ 1 +#endif +#if defined(ANDROID) +#undef __ANDROID__ +#undef __LINUX__ /*do we need to do this?*/ +#define __ANDROID__ 1 +#endif + +#if defined(__APPLE__) +/* lets us know what version of Mac OS X we're compiling on */ +#include "AvailabilityMacros.h" +#include "TargetConditionals.h" +#if TARGET_OS_IPHONE +/* if compiling for iPhone */ +#undef __IPHONEOS__ +#define __IPHONEOS__ 1 +#undef __MACOSX__ +#else +/* if not compiling for iPhone */ +#undef __MACOSX__ +#define __MACOSX__ 1 +#if MAC_OS_X_VERSION_MIN_REQUIRED < 1050 +# error SDL for Mac OS X only supports deploying on 10.5 and above. +#endif /* MAC_OS_X_VERSION_MIN_REQUIRED < 1050 */ +#if MAC_OS_X_VERSION_MAX_ALLOWED < 1060 +# error SDL for Mac OS X must be built with a 10.6 SDK or above. +#endif /* MAC_OS_X_VERSION_MAX_ALLOWED < 1060 */ +#endif /* TARGET_OS_IPHONE */ +#endif /* defined(__APPLE__) */ + +#if defined(__NetBSD__) +#undef __NETBSD__ +#define __NETBSD__ 1 +#endif +#if defined(__OpenBSD__) +#undef __OPENBSD__ +#define __OPENBSD__ 1 +#endif +#if defined(__OS2__) +#undef __OS2__ +#define __OS2__ 1 +#endif +#if defined(osf) || defined(__osf) || defined(__osf__) || defined(_OSF_SOURCE) +#undef __OSF__ +#define __OSF__ 1 +#endif +#if defined(__QNXNTO__) +#undef __QNXNTO__ +#define __QNXNTO__ 1 +#endif +#if defined(riscos) || defined(__riscos) || defined(__riscos__) +#undef __RISCOS__ +#define __RISCOS__ 1 +#endif +#if defined(__SVR4) +#undef __SOLARIS__ +#define __SOLARIS__ 1 +#endif +#if defined(WIN32) || defined(_WIN32) || defined(__CYGWIN__) +#undef __WIN32__ +#define __WIN32__ 1 +#endif +#if defined(__PSP__) +#undef __PSP__ +#define __PSP__ 1 +#endif + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Gets the name of the platform. + */ +extern DECLSPEC const char * SDLCALL SDL_GetPlatform (void); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_platform_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_power.h b/src/SDL2/SDL_power.h new file mode 100644 index 000000000..4f70c5bb1 --- /dev/null +++ b/src/SDL2/SDL_power.h @@ -0,0 +1,75 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef _SDL_power_h +#define _SDL_power_h + +/** + * \file SDL_power.h + * + * Header for the SDL power management routines. + */ + +#include "SDL_stdinc.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief The basic state for the system's power supply. + */ +typedef enum +{ + SDL_POWERSTATE_UNKNOWN, /**< cannot determine power status */ + SDL_POWERSTATE_ON_BATTERY, /**< Not plugged in, running on the battery */ + SDL_POWERSTATE_NO_BATTERY, /**< Plugged in, no battery available */ + SDL_POWERSTATE_CHARGING, /**< Plugged in, charging battery */ + SDL_POWERSTATE_CHARGED /**< Plugged in, battery charged */ +} SDL_PowerState; + + +/** + * \brief Get the current power supply details. + * + * \param secs Seconds of battery life left. You can pass a NULL here if + * you don't care. Will return -1 if we can't determine a + * value, or we're not running on a battery. + * + * \param pct Percentage of battery life left, between 0 and 100. You can + * pass a NULL here if you don't care. Will return -1 if we + * can't determine a value, or we're not running on a battery. + * + * \return The state of the battery (if any). + */ +extern DECLSPEC SDL_PowerState SDLCALL SDL_GetPowerInfo(int *secs, int *pct); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_power_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_quit.h b/src/SDL2/SDL_quit.h new file mode 100644 index 000000000..485e42db0 --- /dev/null +++ b/src/SDL2/SDL_quit.h @@ -0,0 +1,58 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_quit.h + * + * Include file for SDL quit event handling. + */ + +#ifndef _SDL_quit_h +#define _SDL_quit_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" + +/** + * \file SDL_quit.h + * + * An ::SDL_QUIT event is generated when the user tries to close the application + * window. If it is ignored or filtered out, the window will remain open. + * If it is not ignored or filtered, it is queued normally and the window + * is allowed to close. When the window is closed, screen updates will + * complete, but have no effect. + * + * SDL_Init() installs signal handlers for SIGINT (keyboard interrupt) + * and SIGTERM (system termination request), if handlers do not already + * exist, that generate ::SDL_QUIT events as well. There is no way + * to determine the cause of an ::SDL_QUIT event, but setting a signal + * handler in your application will override the default generation of + * quit events for that signal. + * + * \sa SDL_Quit() + */ + +/* There are no functions directly affecting the quit event */ + +#define SDL_QuitRequested() \ + (SDL_PumpEvents(), (SDL_PeepEvents(NULL,0,SDL_PEEKEVENT,SDL_QUIT,SDL_QUIT) > 0)) + +#endif /* _SDL_quit_h */ diff --git a/src/SDL2/SDL_rect.h b/src/SDL2/SDL_rect.h new file mode 100644 index 000000000..c8af7c197 --- /dev/null +++ b/src/SDL2/SDL_rect.h @@ -0,0 +1,138 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_rect.h + * + * Header file for SDL_rect definition and management functions. + */ + +#ifndef _SDL_rect_h +#define _SDL_rect_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_pixels.h" +#include "SDL_rwops.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief The structure that defines a point + * + * \sa SDL_EnclosePoints + */ +typedef struct +{ + int x; + int y; +} SDL_Point; + +/** + * \brief A rectangle, with the origin at the upper left. + * + * \sa SDL_RectEmpty + * \sa SDL_RectEquals + * \sa SDL_HasIntersection + * \sa SDL_IntersectRect + * \sa SDL_UnionRect + * \sa SDL_EnclosePoints + */ +typedef struct SDL_Rect +{ + int x, y; + int w, h; +} SDL_Rect; + +/** + * \brief Returns true if the rectangle has no area. + */ +SDL_FORCE_INLINE SDL_bool SDL_RectEmpty(const SDL_Rect *r) +{ + return ((!r) || (r->w <= 0) || (r->h <= 0)) ? SDL_TRUE : SDL_FALSE; +} + +/** + * \brief Returns true if the two rectangles are equal. + */ +SDL_FORCE_INLINE SDL_bool SDL_RectEquals(const SDL_Rect *a, const SDL_Rect *b) +{ + return (a && b && (a->x == b->x) && (a->y == b->y) && + (a->w == b->w) && (a->h == b->h)) ? SDL_TRUE : SDL_FALSE; +} + +/** + * \brief Determine whether two rectangles intersect. + * + * \return SDL_TRUE if there is an intersection, SDL_FALSE otherwise. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasIntersection(const SDL_Rect * A, + const SDL_Rect * B); + +/** + * \brief Calculate the intersection of two rectangles. + * + * \return SDL_TRUE if there is an intersection, SDL_FALSE otherwise. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_IntersectRect(const SDL_Rect * A, + const SDL_Rect * B, + SDL_Rect * result); + +/** + * \brief Calculate the union of two rectangles. + */ +extern DECLSPEC void SDLCALL SDL_UnionRect(const SDL_Rect * A, + const SDL_Rect * B, + SDL_Rect * result); + +/** + * \brief Calculate a minimal rectangle enclosing a set of points + * + * \return SDL_TRUE if any points were within the clipping rect + */ +extern DECLSPEC SDL_bool SDLCALL SDL_EnclosePoints(const SDL_Point * points, + int count, + const SDL_Rect * clip, + SDL_Rect * result); + +/** + * \brief Calculate the intersection of a rectangle and line segment. + * + * \return SDL_TRUE if there is an intersection, SDL_FALSE otherwise. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_IntersectRectAndLine(const SDL_Rect * + rect, int *X1, + int *Y1, int *X2, + int *Y2); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_rect_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_render.h b/src/SDL2/SDL_render.h new file mode 100644 index 000000000..1e24619f0 --- /dev/null +++ b/src/SDL2/SDL_render.h @@ -0,0 +1,845 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_render.h + * + * Header file for SDL 2D rendering functions. + * + * This API supports the following features: + * * single pixel points + * * single pixel lines + * * filled rectangles + * * texture images + * + * The primitives may be drawn in opaque, blended, or additive modes. + * + * The texture images may be drawn in opaque, blended, or additive modes. + * They can have an additional color tint or alpha modulation applied to + * them, and may also be stretched with linear interpolation. + * + * This API is designed to accelerate simple 2D operations. You may + * want more functionality such as polygons and particle effects and + * in that case you should use SDL's OpenGL/Direct3D support or one + * of the many good 3D engines. + * + * These functions must be called from the main thread. + * See this bug for details: http://bugzilla.libsdl.org/show_bug.cgi?id=1995 + */ + +#ifndef _SDL_render_h +#define _SDL_render_h + +#include "SDL_stdinc.h" +#include "SDL_rect.h" +#include "SDL_video.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Flags used when creating a rendering context + */ +typedef enum +{ + SDL_RENDERER_SOFTWARE = 0x00000001, /**< The renderer is a software fallback */ + SDL_RENDERER_ACCELERATED = 0x00000002, /**< The renderer uses hardware + acceleration */ + SDL_RENDERER_PRESENTVSYNC = 0x00000004, /**< Present is synchronized + with the refresh rate */ + SDL_RENDERER_TARGETTEXTURE = 0x00000008 /**< The renderer supports + rendering to texture */ +} SDL_RendererFlags; + +/** + * \brief Information on the capabilities of a render driver or context. + */ +typedef struct SDL_RendererInfo +{ + const char *name; /**< The name of the renderer */ + Uint32 flags; /**< Supported ::SDL_RendererFlags */ + Uint32 num_texture_formats; /**< The number of available texture formats */ + Uint32 texture_formats[16]; /**< The available texture formats */ + int max_texture_width; /**< The maximimum texture width */ + int max_texture_height; /**< The maximimum texture height */ +} SDL_RendererInfo; + +/** + * \brief The access pattern allowed for a texture. + */ +typedef enum +{ + SDL_TEXTUREACCESS_STATIC, /**< Changes rarely, not lockable */ + SDL_TEXTUREACCESS_STREAMING, /**< Changes frequently, lockable */ + SDL_TEXTUREACCESS_TARGET /**< Texture can be used as a render target */ +} SDL_TextureAccess; + +/** + * \brief The texture channel modulation used in SDL_RenderCopy(). + */ +typedef enum +{ + SDL_TEXTUREMODULATE_NONE = 0x00000000, /**< No modulation */ + SDL_TEXTUREMODULATE_COLOR = 0x00000001, /**< srcC = srcC * color */ + SDL_TEXTUREMODULATE_ALPHA = 0x00000002 /**< srcA = srcA * alpha */ +} SDL_TextureModulate; + +/** + * \brief Flip constants for SDL_RenderCopyEx + */ +typedef enum +{ + SDL_FLIP_NONE = 0x00000000, /**< Do not flip */ + SDL_FLIP_HORIZONTAL = 0x00000001, /**< flip horizontally */ + SDL_FLIP_VERTICAL = 0x00000002 /**< flip vertically */ +} SDL_RendererFlip; + +/** + * \brief A structure representing rendering state + */ +struct SDL_Renderer; +typedef struct SDL_Renderer SDL_Renderer; + +/** + * \brief An efficient driver-specific representation of pixel data + */ +struct SDL_Texture; +typedef struct SDL_Texture SDL_Texture; + + +/* Function prototypes */ + +/** + * \brief Get the number of 2D rendering drivers available for the current + * display. + * + * A render driver is a set of code that handles rendering and texture + * management on a particular display. Normally there is only one, but + * some drivers may have several available with different capabilities. + * + * \sa SDL_GetRenderDriverInfo() + * \sa SDL_CreateRenderer() + */ +extern DECLSPEC int SDLCALL SDL_GetNumRenderDrivers(void); + +/** + * \brief Get information about a specific 2D rendering driver for the current + * display. + * + * \param index The index of the driver to query information about. + * \param info A pointer to an SDL_RendererInfo struct to be filled with + * information on the rendering driver. + * + * \return 0 on success, -1 if the index was out of range. + * + * \sa SDL_CreateRenderer() + */ +extern DECLSPEC int SDLCALL SDL_GetRenderDriverInfo(int index, + SDL_RendererInfo * info); + +/** + * \brief Create a window and default renderer + * + * \param width The width of the window + * \param height The height of the window + * \param window_flags The flags used to create the window + * \param window A pointer filled with the window, or NULL on error + * \param renderer A pointer filled with the renderer, or NULL on error + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_CreateWindowAndRenderer( + int width, int height, Uint32 window_flags, + SDL_Window **window, SDL_Renderer **renderer); + + +/** + * \brief Create a 2D rendering context for a window. + * + * \param window The window where rendering is displayed. + * \param index The index of the rendering driver to initialize, or -1 to + * initialize the first one supporting the requested flags. + * \param flags ::SDL_RendererFlags. + * + * \return A valid rendering context or NULL if there was an error. + * + * \sa SDL_CreateSoftwareRenderer() + * \sa SDL_GetRendererInfo() + * \sa SDL_DestroyRenderer() + */ +extern DECLSPEC SDL_Renderer * SDLCALL SDL_CreateRenderer(SDL_Window * window, + int index, Uint32 flags); + +/** + * \brief Create a 2D software rendering context for a surface. + * + * \param surface The surface where rendering is done. + * + * \return A valid rendering context or NULL if there was an error. + * + * \sa SDL_CreateRenderer() + * \sa SDL_DestroyRenderer() + */ +extern DECLSPEC SDL_Renderer * SDLCALL SDL_CreateSoftwareRenderer(SDL_Surface * surface); + +/** + * \brief Get the renderer associated with a window. + */ +extern DECLSPEC SDL_Renderer * SDLCALL SDL_GetRenderer(SDL_Window * window); + +/** + * \brief Get information about a rendering context. + */ +extern DECLSPEC int SDLCALL SDL_GetRendererInfo(SDL_Renderer * renderer, + SDL_RendererInfo * info); + +/** + * \brief Get the output size of a rendering context. + */ +extern DECLSPEC int SDLCALL SDL_GetRendererOutputSize(SDL_Renderer * renderer, + int *w, int *h); + +/** + * \brief Create a texture for a rendering context. + * + * \param renderer The renderer. + * \param format The format of the texture. + * \param access One of the enumerated values in ::SDL_TextureAccess. + * \param w The width of the texture in pixels. + * \param h The height of the texture in pixels. + * + * \return The created texture is returned, or 0 if no rendering context was + * active, the format was unsupported, or the width or height were out + * of range. + * + * \sa SDL_QueryTexture() + * \sa SDL_UpdateTexture() + * \sa SDL_DestroyTexture() + */ +extern DECLSPEC SDL_Texture * SDLCALL SDL_CreateTexture(SDL_Renderer * renderer, + Uint32 format, + int access, int w, + int h); + +/** + * \brief Create a texture from an existing surface. + * + * \param renderer The renderer. + * \param surface The surface containing pixel data used to fill the texture. + * + * \return The created texture is returned, or 0 on error. + * + * \note The surface is not modified or freed by this function. + * + * \sa SDL_QueryTexture() + * \sa SDL_DestroyTexture() + */ +extern DECLSPEC SDL_Texture * SDLCALL SDL_CreateTextureFromSurface(SDL_Renderer * renderer, SDL_Surface * surface); + +/** + * \brief Query the attributes of a texture + * + * \param texture A texture to be queried. + * \param format A pointer filled in with the raw format of the texture. The + * actual format may differ, but pixel transfers will use this + * format. + * \param access A pointer filled in with the actual access to the texture. + * \param w A pointer filled in with the width of the texture in pixels. + * \param h A pointer filled in with the height of the texture in pixels. + * + * \return 0 on success, or -1 if the texture is not valid. + */ +extern DECLSPEC int SDLCALL SDL_QueryTexture(SDL_Texture * texture, + Uint32 * format, int *access, + int *w, int *h); + +/** + * \brief Set an additional color value used in render copy operations. + * + * \param texture The texture to update. + * \param r The red color value multiplied into copy operations. + * \param g The green color value multiplied into copy operations. + * \param b The blue color value multiplied into copy operations. + * + * \return 0 on success, or -1 if the texture is not valid or color modulation + * is not supported. + * + * \sa SDL_GetTextureColorMod() + */ +extern DECLSPEC int SDLCALL SDL_SetTextureColorMod(SDL_Texture * texture, + Uint8 r, Uint8 g, Uint8 b); + + +/** + * \brief Get the additional color value used in render copy operations. + * + * \param texture The texture to query. + * \param r A pointer filled in with the current red color value. + * \param g A pointer filled in with the current green color value. + * \param b A pointer filled in with the current blue color value. + * + * \return 0 on success, or -1 if the texture is not valid. + * + * \sa SDL_SetTextureColorMod() + */ +extern DECLSPEC int SDLCALL SDL_GetTextureColorMod(SDL_Texture * texture, + Uint8 * r, Uint8 * g, + Uint8 * b); + +/** + * \brief Set an additional alpha value used in render copy operations. + * + * \param texture The texture to update. + * \param alpha The alpha value multiplied into copy operations. + * + * \return 0 on success, or -1 if the texture is not valid or alpha modulation + * is not supported. + * + * \sa SDL_GetTextureAlphaMod() + */ +extern DECLSPEC int SDLCALL SDL_SetTextureAlphaMod(SDL_Texture * texture, + Uint8 alpha); + +/** + * \brief Get the additional alpha value used in render copy operations. + * + * \param texture The texture to query. + * \param alpha A pointer filled in with the current alpha value. + * + * \return 0 on success, or -1 if the texture is not valid. + * + * \sa SDL_SetTextureAlphaMod() + */ +extern DECLSPEC int SDLCALL SDL_GetTextureAlphaMod(SDL_Texture * texture, + Uint8 * alpha); + +/** + * \brief Set the blend mode used for texture copy operations. + * + * \param texture The texture to update. + * \param blendMode ::SDL_BlendMode to use for texture blending. + * + * \return 0 on success, or -1 if the texture is not valid or the blend mode is + * not supported. + * + * \note If the blend mode is not supported, the closest supported mode is + * chosen. + * + * \sa SDL_GetTextureBlendMode() + */ +extern DECLSPEC int SDLCALL SDL_SetTextureBlendMode(SDL_Texture * texture, + SDL_BlendMode blendMode); + +/** + * \brief Get the blend mode used for texture copy operations. + * + * \param texture The texture to query. + * \param blendMode A pointer filled in with the current blend mode. + * + * \return 0 on success, or -1 if the texture is not valid. + * + * \sa SDL_SetTextureBlendMode() + */ +extern DECLSPEC int SDLCALL SDL_GetTextureBlendMode(SDL_Texture * texture, + SDL_BlendMode *blendMode); + +/** + * \brief Update the given texture rectangle with new pixel data. + * + * \param texture The texture to update + * \param rect A pointer to the rectangle of pixels to update, or NULL to + * update the entire texture. + * \param pixels The raw pixel data. + * \param pitch The number of bytes between rows of pixel data. + * + * \return 0 on success, or -1 if the texture is not valid. + * + * \note This is a fairly slow function. + */ +extern DECLSPEC int SDLCALL SDL_UpdateTexture(SDL_Texture * texture, + const SDL_Rect * rect, + const void *pixels, int pitch); + +/** + * \brief Lock a portion of the texture for write-only pixel access. + * + * \param texture The texture to lock for access, which was created with + * ::SDL_TEXTUREACCESS_STREAMING. + * \param rect A pointer to the rectangle to lock for access. If the rect + * is NULL, the entire texture will be locked. + * \param pixels This is filled in with a pointer to the locked pixels, + * appropriately offset by the locked area. + * \param pitch This is filled in with the pitch of the locked pixels. + * + * \return 0 on success, or -1 if the texture is not valid or was not created with ::SDL_TEXTUREACCESS_STREAMING. + * + * \sa SDL_UnlockTexture() + */ +extern DECLSPEC int SDLCALL SDL_LockTexture(SDL_Texture * texture, + const SDL_Rect * rect, + void **pixels, int *pitch); + +/** + * \brief Unlock a texture, uploading the changes to video memory, if needed. + * + * \sa SDL_LockTexture() + */ +extern DECLSPEC void SDLCALL SDL_UnlockTexture(SDL_Texture * texture); + +/** + * \brief Determines whether a window supports the use of render targets + * + * \param renderer The renderer that will be checked + * + * \return SDL_TRUE if supported, SDL_FALSE if not. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_RenderTargetSupported(SDL_Renderer *renderer); + +/** + * \brief Set a texture as the current rendering target. + * + * \param renderer The renderer. + * \param texture The targeted texture, which must be created with the SDL_TEXTUREACCESS_TARGET flag, or NULL for the default render target + * + * \return 0 on success, or -1 on error + * + * \sa SDL_GetRenderTarget() + */ +extern DECLSPEC int SDLCALL SDL_SetRenderTarget(SDL_Renderer *renderer, + SDL_Texture *texture); + +/** + * \brief Get the current render target or NULL for the default render target. + * + * \return The current render target + * + * \sa SDL_SetRenderTarget() + */ +extern DECLSPEC SDL_Texture * SDLCALL SDL_GetRenderTarget(SDL_Renderer *renderer); + +/** + * \brief Set device independent resolution for rendering + * + * \param renderer The renderer for which resolution should be set. + * \param w The width of the logical resolution + * \param h The height of the logical resolution + * + * This function uses the viewport and scaling functionality to allow a fixed logical + * resolution for rendering, regardless of the actual output resolution. If the actual + * output resolution doesn't have the same aspect ratio the output rendering will be + * centered within the output display. + * + * If the output display is a window, mouse events in the window will be filtered + * and scaled so they seem to arrive within the logical resolution. + * + * \note If this function results in scaling or subpixel drawing by the + * rendering backend, it will be handled using the appropriate + * quality hints. + * + * \sa SDL_RenderGetLogicalSize() + * \sa SDL_RenderSetScale() + * \sa SDL_RenderSetViewport() + */ +extern DECLSPEC int SDLCALL SDL_RenderSetLogicalSize(SDL_Renderer * renderer, int w, int h); + +/** + * \brief Get device independent resolution for rendering + * + * \param renderer The renderer from which resolution should be queried. + * \param w A pointer filled with the width of the logical resolution + * \param h A pointer filled with the height of the logical resolution + * + * \sa SDL_RenderSetLogicalSize() + */ +extern DECLSPEC void SDLCALL SDL_RenderGetLogicalSize(SDL_Renderer * renderer, int *w, int *h); + +/** + * \brief Set the drawing area for rendering on the current target. + * + * \param renderer The renderer for which the drawing area should be set. + * \param rect The rectangle representing the drawing area, or NULL to set the viewport to the entire target. + * + * The x,y of the viewport rect represents the origin for rendering. + * + * \return 0 on success, or -1 on error + * + * \note If the window associated with the renderer is resized, the viewport is automatically reset. + * + * \sa SDL_RenderGetViewport() + * \sa SDL_RenderSetLogicalSize() + */ +extern DECLSPEC int SDLCALL SDL_RenderSetViewport(SDL_Renderer * renderer, + const SDL_Rect * rect); + +/** + * \brief Get the drawing area for the current target. + * + * \sa SDL_RenderSetViewport() + */ +extern DECLSPEC void SDLCALL SDL_RenderGetViewport(SDL_Renderer * renderer, + SDL_Rect * rect); + +/** + * \brief Set the clip rectangle for the current target. + * + * \param renderer The renderer for which clip rectangle should be set. + * \param rect A pointer to the rectangle to set as the clip rectangle, or + * NULL to disable clipping. + * + * \return 0 on success, or -1 on error + * + * \sa SDL_RenderGetClipRect() + */ +extern DECLSPEC int SDLCALL SDL_RenderSetClipRect(SDL_Renderer * renderer, + const SDL_Rect * rect); + +/** + * \brief Get the clip rectangle for the current target. + * + * \param renderer The renderer from which clip rectangle should be queried. + * \param rect A pointer filled in with the current clip rectangle, or + * an empty rectangle if clipping is disabled. + * + * \sa SDL_RenderSetClipRect() + */ +extern DECLSPEC void SDLCALL SDL_RenderGetClipRect(SDL_Renderer * renderer, + SDL_Rect * rect); + +/** + * \brief Set the drawing scale for rendering on the current target. + * + * \param renderer The renderer for which the drawing scale should be set. + * \param scaleX The horizontal scaling factor + * \param scaleY The vertical scaling factor + * + * The drawing coordinates are scaled by the x/y scaling factors + * before they are used by the renderer. This allows resolution + * independent drawing with a single coordinate system. + * + * \note If this results in scaling or subpixel drawing by the + * rendering backend, it will be handled using the appropriate + * quality hints. For best results use integer scaling factors. + * + * \sa SDL_RenderGetScale() + * \sa SDL_RenderSetLogicalSize() + */ +extern DECLSPEC int SDLCALL SDL_RenderSetScale(SDL_Renderer * renderer, + float scaleX, float scaleY); + +/** + * \brief Get the drawing scale for the current target. + * + * \param renderer The renderer from which drawing scale should be queried. + * \param scaleX A pointer filled in with the horizontal scaling factor + * \param scaleY A pointer filled in with the vertical scaling factor + * + * \sa SDL_RenderSetScale() + */ +extern DECLSPEC void SDLCALL SDL_RenderGetScale(SDL_Renderer * renderer, + float *scaleX, float *scaleY); + +/** + * \brief Set the color used for drawing operations (Rect, Line and Clear). + * + * \param renderer The renderer for which drawing color should be set. + * \param r The red value used to draw on the rendering target. + * \param g The green value used to draw on the rendering target. + * \param b The blue value used to draw on the rendering target. + * \param a The alpha value used to draw on the rendering target, usually + * ::SDL_ALPHA_OPAQUE (255). + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDL_SetRenderDrawColor(SDL_Renderer * renderer, + Uint8 r, Uint8 g, Uint8 b, + Uint8 a); + +/** + * \brief Get the color used for drawing operations (Rect, Line and Clear). + * + * \param renderer The renderer from which drawing color should be queried. + * \param r A pointer to the red value used to draw on the rendering target. + * \param g A pointer to the green value used to draw on the rendering target. + * \param b A pointer to the blue value used to draw on the rendering target. + * \param a A pointer to the alpha value used to draw on the rendering target, + * usually ::SDL_ALPHA_OPAQUE (255). + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDL_GetRenderDrawColor(SDL_Renderer * renderer, + Uint8 * r, Uint8 * g, Uint8 * b, + Uint8 * a); + +/** + * \brief Set the blend mode used for drawing operations (Fill and Line). + * + * \param renderer The renderer for which blend mode should be set. + * \param blendMode ::SDL_BlendMode to use for blending. + * + * \return 0 on success, or -1 on error + * + * \note If the blend mode is not supported, the closest supported mode is + * chosen. + * + * \sa SDL_GetRenderDrawBlendMode() + */ +extern DECLSPEC int SDLCALL SDL_SetRenderDrawBlendMode(SDL_Renderer * renderer, + SDL_BlendMode blendMode); + +/** + * \brief Get the blend mode used for drawing operations. + * + * \param renderer The renderer from which blend mode should be queried. + * \param blendMode A pointer filled in with the current blend mode. + * + * \return 0 on success, or -1 on error + * + * \sa SDL_SetRenderDrawBlendMode() + */ +extern DECLSPEC int SDLCALL SDL_GetRenderDrawBlendMode(SDL_Renderer * renderer, + SDL_BlendMode *blendMode); + +/** + * \brief Clear the current rendering target with the drawing color + * + * This function clears the entire rendering target, ignoring the viewport. + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_RenderClear(SDL_Renderer * renderer); + +/** + * \brief Draw a point on the current rendering target. + * + * \param renderer The renderer which should draw a point. + * \param x The x coordinate of the point. + * \param y The y coordinate of the point. + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_RenderDrawPoint(SDL_Renderer * renderer, + int x, int y); + +/** + * \brief Draw multiple points on the current rendering target. + * + * \param renderer The renderer which should draw multiple points. + * \param points The points to draw + * \param count The number of points to draw + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_RenderDrawPoints(SDL_Renderer * renderer, + const SDL_Point * points, + int count); + +/** + * \brief Draw a line on the current rendering target. + * + * \param renderer The renderer which should draw a line. + * \param x1 The x coordinate of the start point. + * \param y1 The y coordinate of the start point. + * \param x2 The x coordinate of the end point. + * \param y2 The y coordinate of the end point. + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_RenderDrawLine(SDL_Renderer * renderer, + int x1, int y1, int x2, int y2); + +/** + * \brief Draw a series of connected lines on the current rendering target. + * + * \param renderer The renderer which should draw multiple lines. + * \param points The points along the lines + * \param count The number of points, drawing count-1 lines + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_RenderDrawLines(SDL_Renderer * renderer, + const SDL_Point * points, + int count); + +/** + * \brief Draw a rectangle on the current rendering target. + * + * \param renderer The renderer which should draw a rectangle. + * \param rect A pointer to the destination rectangle, or NULL to outline the entire rendering target. + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_RenderDrawRect(SDL_Renderer * renderer, + const SDL_Rect * rect); + +/** + * \brief Draw some number of rectangles on the current rendering target. + * + * \param renderer The renderer which should draw multiple rectangles. + * \param rects A pointer to an array of destination rectangles. + * \param count The number of rectangles. + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_RenderDrawRects(SDL_Renderer * renderer, + const SDL_Rect * rects, + int count); + +/** + * \brief Fill a rectangle on the current rendering target with the drawing color. + * + * \param renderer The renderer which should fill a rectangle. + * \param rect A pointer to the destination rectangle, or NULL for the entire + * rendering target. + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_RenderFillRect(SDL_Renderer * renderer, + const SDL_Rect * rect); + +/** + * \brief Fill some number of rectangles on the current rendering target with the drawing color. + * + * \param renderer The renderer which should fill multiple rectangles. + * \param rects A pointer to an array of destination rectangles. + * \param count The number of rectangles. + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_RenderFillRects(SDL_Renderer * renderer, + const SDL_Rect * rects, + int count); + +/** + * \brief Copy a portion of the texture to the current rendering target. + * + * \param renderer The renderer which should copy parts of a texture. + * \param texture The source texture. + * \param srcrect A pointer to the source rectangle, or NULL for the entire + * texture. + * \param dstrect A pointer to the destination rectangle, or NULL for the + * entire rendering target. + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_RenderCopy(SDL_Renderer * renderer, + SDL_Texture * texture, + const SDL_Rect * srcrect, + const SDL_Rect * dstrect); + +/** + * \brief Copy a portion of the source texture to the current rendering target, rotating it by angle around the given center + * + * \param renderer The renderer which should copy parts of a texture. + * \param texture The source texture. + * \param srcrect A pointer to the source rectangle, or NULL for the entire + * texture. + * \param dstrect A pointer to the destination rectangle, or NULL for the + * entire rendering target. + * \param angle An angle in degrees that indicates the rotation that will be applied to dstrect + * \param center A pointer to a point indicating the point around which dstrect will be rotated (if NULL, rotation will be done aroud dstrect.w/2, dstrect.h/2) + * \param flip An SDL_RendererFlip value stating which flipping actions should be performed on the texture + * + * \return 0 on success, or -1 on error + */ +extern DECLSPEC int SDLCALL SDL_RenderCopyEx(SDL_Renderer * renderer, + SDL_Texture * texture, + const SDL_Rect * srcrect, + const SDL_Rect * dstrect, + const double angle, + const SDL_Point *center, + const SDL_RendererFlip flip); + +/** + * \brief Read pixels from the current rendering target. + * + * \param renderer The renderer from which pixels should be read. + * \param rect A pointer to the rectangle to read, or NULL for the entire + * render target. + * \param format The desired format of the pixel data, or 0 to use the format + * of the rendering target + * \param pixels A pointer to be filled in with the pixel data + * \param pitch The pitch of the pixels parameter. + * + * \return 0 on success, or -1 if pixel reading is not supported. + * + * \warning This is a very slow operation, and should not be used frequently. + */ +extern DECLSPEC int SDLCALL SDL_RenderReadPixels(SDL_Renderer * renderer, + const SDL_Rect * rect, + Uint32 format, + void *pixels, int pitch); + +/** + * \brief Update the screen with rendering performed. + */ +extern DECLSPEC void SDLCALL SDL_RenderPresent(SDL_Renderer * renderer); + +/** + * \brief Destroy the specified texture. + * + * \sa SDL_CreateTexture() + * \sa SDL_CreateTextureFromSurface() + */ +extern DECLSPEC void SDLCALL SDL_DestroyTexture(SDL_Texture * texture); + +/** + * \brief Destroy the rendering context for a window and free associated + * textures. + * + * \sa SDL_CreateRenderer() + */ +extern DECLSPEC void SDLCALL SDL_DestroyRenderer(SDL_Renderer * renderer); + + +/** + * \brief Bind the texture to the current OpenGL/ES/ES2 context for use with + * OpenGL instructions. + * + * \param texture The SDL texture to bind + * \param texw A pointer to a float that will be filled with the texture width + * \param texh A pointer to a float that will be filled with the texture height + * + * \return 0 on success, or -1 if the operation is not supported + */ +extern DECLSPEC int SDLCALL SDL_GL_BindTexture(SDL_Texture *texture, float *texw, float *texh); + +/** + * \brief Unbind a texture from the current OpenGL/ES/ES2 context. + * + * \param texture The SDL texture to unbind + * + * \return 0 on success, or -1 if the operation is not supported + */ +extern DECLSPEC int SDLCALL SDL_GL_UnbindTexture(SDL_Texture *texture); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_render_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_revision.h b/src/SDL2/SDL_revision.h new file mode 100644 index 000000000..2d57530ee --- /dev/null +++ b/src/SDL2/SDL_revision.h @@ -0,0 +1,2 @@ +#define SDL_REVISION "hg-7633:d6a8fa507a45" +#define SDL_REVISION_NUMBER 7633 diff --git a/src/SDL2/SDL_rwops.h b/src/SDL2/SDL_rwops.h new file mode 100644 index 000000000..0461ff782 --- /dev/null +++ b/src/SDL2/SDL_rwops.h @@ -0,0 +1,232 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_rwops.h + * + * This file provides a general interface for SDL to read and write + * data streams. It can easily be extended to files, memory, etc. + */ + +#ifndef _SDL_rwops_h +#define _SDL_rwops_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* RWops Types */ +#define SDL_RWOPS_UNKNOWN 0 /* Unknown stream type */ +#define SDL_RWOPS_WINFILE 1 /* Win32 file */ +#define SDL_RWOPS_STDFILE 2 /* Stdio file */ +#define SDL_RWOPS_JNIFILE 3 /* Android asset */ +#define SDL_RWOPS_MEMORY 4 /* Memory stream */ +#define SDL_RWOPS_MEMORY_RO 5 /* Read-Only memory stream */ + +/** + * This is the read/write operation structure -- very basic. + */ +typedef struct SDL_RWops +{ + /** + * Return the size of the file in this rwops, or -1 if unknown + */ + Sint64 (SDLCALL * size) (struct SDL_RWops * context); + + /** + * Seek to \c offset relative to \c whence, one of stdio's whence values: + * RW_SEEK_SET, RW_SEEK_CUR, RW_SEEK_END + * + * \return the final offset in the data stream, or -1 on error. + */ + Sint64 (SDLCALL * seek) (struct SDL_RWops * context, Sint64 offset, + int whence); + + /** + * Read up to \c maxnum objects each of size \c size from the data + * stream to the area pointed at by \c ptr. + * + * \return the number of objects read, or 0 at error or end of file. + */ + size_t (SDLCALL * read) (struct SDL_RWops * context, void *ptr, + size_t size, size_t maxnum); + + /** + * Write exactly \c num objects each of size \c size from the area + * pointed at by \c ptr to data stream. + * + * \return the number of objects written, or 0 at error or end of file. + */ + size_t (SDLCALL * write) (struct SDL_RWops * context, const void *ptr, + size_t size, size_t num); + + /** + * Close and free an allocated SDL_RWops structure. + * + * \return 0 if successful or -1 on write error when flushing data. + */ + int (SDLCALL * close) (struct SDL_RWops * context); + + Uint32 type; + union + { +#if defined(ANDROID) + struct + { + void *fileNameRef; + void *inputStreamRef; + void *readableByteChannelRef; + void *readMethod; + void *assetFileDescriptorRef; + long position; + long size; + long offset; + int fd; + } androidio; +#elif defined(__WIN32__) + struct + { + SDL_bool append; + void *h; + struct + { + void *data; + size_t size; + size_t left; + } buffer; + } windowsio; +#endif + +#ifdef HAVE_STDIO_H + struct + { + SDL_bool autoclose; + FILE *fp; + } stdio; +#endif + struct + { + Uint8 *base; + Uint8 *here; + Uint8 *stop; + } mem; + struct + { + void *data1; + void *data2; + } unknown; + } hidden; + +} SDL_RWops; + + +/** + * \name RWFrom functions + * + * Functions to create SDL_RWops structures from various data streams. + */ +/*@{*/ + +extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromFile(const char *file, + const char *mode); + +#ifdef HAVE_STDIO_H +extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromFP(FILE * fp, + SDL_bool autoclose); +#else +extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromFP(void * fp, + SDL_bool autoclose); +#endif + +extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromMem(void *mem, int size); +extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromConstMem(const void *mem, + int size); + +/*@}*//*RWFrom functions*/ + + +extern DECLSPEC SDL_RWops *SDLCALL SDL_AllocRW(void); +extern DECLSPEC void SDLCALL SDL_FreeRW(SDL_RWops * area); + +#define RW_SEEK_SET 0 /**< Seek from the beginning of data */ +#define RW_SEEK_CUR 1 /**< Seek relative to current read point */ +#define RW_SEEK_END 2 /**< Seek relative to the end of data */ + +/** + * \name Read/write macros + * + * Macros to easily read and write from an SDL_RWops structure. + */ +/*@{*/ +#define SDL_RWsize(ctx) (ctx)->size(ctx) +#define SDL_RWseek(ctx, offset, whence) (ctx)->seek(ctx, offset, whence) +#define SDL_RWtell(ctx) (ctx)->seek(ctx, 0, RW_SEEK_CUR) +#define SDL_RWread(ctx, ptr, size, n) (ctx)->read(ctx, ptr, size, n) +#define SDL_RWwrite(ctx, ptr, size, n) (ctx)->write(ctx, ptr, size, n) +#define SDL_RWclose(ctx) (ctx)->close(ctx) +/*@}*//*Read/write macros*/ + + +/** + * \name Read endian functions + * + * Read an item of the specified endianness and return in native format. + */ +/*@{*/ +extern DECLSPEC Uint8 SDLCALL SDL_ReadU8(SDL_RWops * src); +extern DECLSPEC Uint16 SDLCALL SDL_ReadLE16(SDL_RWops * src); +extern DECLSPEC Uint16 SDLCALL SDL_ReadBE16(SDL_RWops * src); +extern DECLSPEC Uint32 SDLCALL SDL_ReadLE32(SDL_RWops * src); +extern DECLSPEC Uint32 SDLCALL SDL_ReadBE32(SDL_RWops * src); +extern DECLSPEC Uint64 SDLCALL SDL_ReadLE64(SDL_RWops * src); +extern DECLSPEC Uint64 SDLCALL SDL_ReadBE64(SDL_RWops * src); +/*@}*//*Read endian functions*/ + +/** + * \name Write endian functions + * + * Write an item of native format to the specified endianness. + */ +/*@{*/ +extern DECLSPEC size_t SDLCALL SDL_WriteU8(SDL_RWops * dst, Uint8 value); +extern DECLSPEC size_t SDLCALL SDL_WriteLE16(SDL_RWops * dst, Uint16 value); +extern DECLSPEC size_t SDLCALL SDL_WriteBE16(SDL_RWops * dst, Uint16 value); +extern DECLSPEC size_t SDLCALL SDL_WriteLE32(SDL_RWops * dst, Uint32 value); +extern DECLSPEC size_t SDLCALL SDL_WriteBE32(SDL_RWops * dst, Uint32 value); +extern DECLSPEC size_t SDLCALL SDL_WriteLE64(SDL_RWops * dst, Uint64 value); +extern DECLSPEC size_t SDLCALL SDL_WriteBE64(SDL_RWops * dst, Uint64 value); +/*@}*//*Write endian functions*/ + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_rwops_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_scancode.h b/src/SDL2/SDL_scancode.h new file mode 100644 index 000000000..d3f874811 --- /dev/null +++ b/src/SDL2/SDL_scancode.h @@ -0,0 +1,401 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_scancode.h + * + * Defines keyboard scancodes. + */ + +#ifndef _SDL_scancode_h +#define _SDL_scancode_h + +#include "SDL_stdinc.h" + +/** + * \brief The SDL keyboard scancode representation. + * + * Values of this type are used to represent keyboard keys, among other places + * in the \link SDL_Keysym::scancode key.keysym.scancode \endlink field of the + * SDL_Event structure. + * + * The values in this enumeration are based on the USB usage page standard: + * http://www.usb.org/developers/devclass_docs/Hut1_12v2.pdf + */ +typedef enum +{ + SDL_SCANCODE_UNKNOWN = 0, + + /** + * \name Usage page 0x07 + * + * These values are from usage page 0x07 (USB keyboard page). + */ + /*@{*/ + + SDL_SCANCODE_A = 4, + SDL_SCANCODE_B = 5, + SDL_SCANCODE_C = 6, + SDL_SCANCODE_D = 7, + SDL_SCANCODE_E = 8, + SDL_SCANCODE_F = 9, + SDL_SCANCODE_G = 10, + SDL_SCANCODE_H = 11, + SDL_SCANCODE_I = 12, + SDL_SCANCODE_J = 13, + SDL_SCANCODE_K = 14, + SDL_SCANCODE_L = 15, + SDL_SCANCODE_M = 16, + SDL_SCANCODE_N = 17, + SDL_SCANCODE_O = 18, + SDL_SCANCODE_P = 19, + SDL_SCANCODE_Q = 20, + SDL_SCANCODE_R = 21, + SDL_SCANCODE_S = 22, + SDL_SCANCODE_T = 23, + SDL_SCANCODE_U = 24, + SDL_SCANCODE_V = 25, + SDL_SCANCODE_W = 26, + SDL_SCANCODE_X = 27, + SDL_SCANCODE_Y = 28, + SDL_SCANCODE_Z = 29, + + SDL_SCANCODE_1 = 30, + SDL_SCANCODE_2 = 31, + SDL_SCANCODE_3 = 32, + SDL_SCANCODE_4 = 33, + SDL_SCANCODE_5 = 34, + SDL_SCANCODE_6 = 35, + SDL_SCANCODE_7 = 36, + SDL_SCANCODE_8 = 37, + SDL_SCANCODE_9 = 38, + SDL_SCANCODE_0 = 39, + + SDL_SCANCODE_RETURN = 40, + SDL_SCANCODE_ESCAPE = 41, + SDL_SCANCODE_BACKSPACE = 42, + SDL_SCANCODE_TAB = 43, + SDL_SCANCODE_SPACE = 44, + + SDL_SCANCODE_MINUS = 45, + SDL_SCANCODE_EQUALS = 46, + SDL_SCANCODE_LEFTBRACKET = 47, + SDL_SCANCODE_RIGHTBRACKET = 48, + SDL_SCANCODE_BACKSLASH = 49, /**< Located at the lower left of the return + * key on ISO keyboards and at the right end + * of the QWERTY row on ANSI keyboards. + * Produces REVERSE SOLIDUS (backslash) and + * VERTICAL LINE in a US layout, REVERSE + * SOLIDUS and VERTICAL LINE in a UK Mac + * layout, NUMBER SIGN and TILDE in a UK + * Windows layout, DOLLAR SIGN and POUND SIGN + * in a Swiss German layout, NUMBER SIGN and + * APOSTROPHE in a German layout, GRAVE + * ACCENT and POUND SIGN in a French Mac + * layout, and ASTERISK and MICRO SIGN in a + * French Windows layout. + */ + SDL_SCANCODE_NONUSHASH = 50, /**< ISO USB keyboards actually use this code + * instead of 49 for the same key, but all + * OSes I've seen treat the two codes + * identically. So, as an implementor, unless + * your keyboard generates both of those + * codes and your OS treats them differently, + * you should generate SDL_SCANCODE_BACKSLASH + * instead of this code. As a user, you + * should not rely on this code because SDL + * will never generate it with most (all?) + * keyboards. + */ + SDL_SCANCODE_SEMICOLON = 51, + SDL_SCANCODE_APOSTROPHE = 52, + SDL_SCANCODE_GRAVE = 53, /**< Located in the top left corner (on both ANSI + * and ISO keyboards). Produces GRAVE ACCENT and + * TILDE in a US Windows layout and in US and UK + * Mac layouts on ANSI keyboards, GRAVE ACCENT + * and NOT SIGN in a UK Windows layout, SECTION + * SIGN and PLUS-MINUS SIGN in US and UK Mac + * layouts on ISO keyboards, SECTION SIGN and + * DEGREE SIGN in a Swiss German layout (Mac: + * only on ISO keyboards), CIRCUMFLEX ACCENT and + * DEGREE SIGN in a German layout (Mac: only on + * ISO keyboards), SUPERSCRIPT TWO and TILDE in a + * French Windows layout, COMMERCIAL AT and + * NUMBER SIGN in a French Mac layout on ISO + * keyboards, and LESS-THAN SIGN and GREATER-THAN + * SIGN in a Swiss German, German, or French Mac + * layout on ANSI keyboards. + */ + SDL_SCANCODE_COMMA = 54, + SDL_SCANCODE_PERIOD = 55, + SDL_SCANCODE_SLASH = 56, + + SDL_SCANCODE_CAPSLOCK = 57, + + SDL_SCANCODE_F1 = 58, + SDL_SCANCODE_F2 = 59, + SDL_SCANCODE_F3 = 60, + SDL_SCANCODE_F4 = 61, + SDL_SCANCODE_F5 = 62, + SDL_SCANCODE_F6 = 63, + SDL_SCANCODE_F7 = 64, + SDL_SCANCODE_F8 = 65, + SDL_SCANCODE_F9 = 66, + SDL_SCANCODE_F10 = 67, + SDL_SCANCODE_F11 = 68, + SDL_SCANCODE_F12 = 69, + + SDL_SCANCODE_PRINTSCREEN = 70, + SDL_SCANCODE_SCROLLLOCK = 71, + SDL_SCANCODE_PAUSE = 72, + SDL_SCANCODE_INSERT = 73, /**< insert on PC, help on some Mac keyboards (but + does send code 73, not 117) */ + SDL_SCANCODE_HOME = 74, + SDL_SCANCODE_PAGEUP = 75, + SDL_SCANCODE_DELETE = 76, + SDL_SCANCODE_END = 77, + SDL_SCANCODE_PAGEDOWN = 78, + SDL_SCANCODE_RIGHT = 79, + SDL_SCANCODE_LEFT = 80, + SDL_SCANCODE_DOWN = 81, + SDL_SCANCODE_UP = 82, + + SDL_SCANCODE_NUMLOCKCLEAR = 83, /**< num lock on PC, clear on Mac keyboards + */ + SDL_SCANCODE_KP_DIVIDE = 84, + SDL_SCANCODE_KP_MULTIPLY = 85, + SDL_SCANCODE_KP_MINUS = 86, + SDL_SCANCODE_KP_PLUS = 87, + SDL_SCANCODE_KP_ENTER = 88, + SDL_SCANCODE_KP_1 = 89, + SDL_SCANCODE_KP_2 = 90, + SDL_SCANCODE_KP_3 = 91, + SDL_SCANCODE_KP_4 = 92, + SDL_SCANCODE_KP_5 = 93, + SDL_SCANCODE_KP_6 = 94, + SDL_SCANCODE_KP_7 = 95, + SDL_SCANCODE_KP_8 = 96, + SDL_SCANCODE_KP_9 = 97, + SDL_SCANCODE_KP_0 = 98, + SDL_SCANCODE_KP_PERIOD = 99, + + SDL_SCANCODE_NONUSBACKSLASH = 100, /**< This is the additional key that ISO + * keyboards have over ANSI ones, + * located between left shift and Y. + * Produces GRAVE ACCENT and TILDE in a + * US or UK Mac layout, REVERSE SOLIDUS + * (backslash) and VERTICAL LINE in a + * US or UK Windows layout, and + * LESS-THAN SIGN and GREATER-THAN SIGN + * in a Swiss German, German, or French + * layout. */ + SDL_SCANCODE_APPLICATION = 101, /**< windows contextual menu, compose */ + SDL_SCANCODE_POWER = 102, /**< The USB document says this is a status flag, + * not a physical key - but some Mac keyboards + * do have a power key. */ + SDL_SCANCODE_KP_EQUALS = 103, + SDL_SCANCODE_F13 = 104, + SDL_SCANCODE_F14 = 105, + SDL_SCANCODE_F15 = 106, + SDL_SCANCODE_F16 = 107, + SDL_SCANCODE_F17 = 108, + SDL_SCANCODE_F18 = 109, + SDL_SCANCODE_F19 = 110, + SDL_SCANCODE_F20 = 111, + SDL_SCANCODE_F21 = 112, + SDL_SCANCODE_F22 = 113, + SDL_SCANCODE_F23 = 114, + SDL_SCANCODE_F24 = 115, + SDL_SCANCODE_EXECUTE = 116, + SDL_SCANCODE_HELP = 117, + SDL_SCANCODE_MENU = 118, + SDL_SCANCODE_SELECT = 119, + SDL_SCANCODE_STOP = 120, + SDL_SCANCODE_AGAIN = 121, /**< redo */ + SDL_SCANCODE_UNDO = 122, + SDL_SCANCODE_CUT = 123, + SDL_SCANCODE_COPY = 124, + SDL_SCANCODE_PASTE = 125, + SDL_SCANCODE_FIND = 126, + SDL_SCANCODE_MUTE = 127, + SDL_SCANCODE_VOLUMEUP = 128, + SDL_SCANCODE_VOLUMEDOWN = 129, +/* not sure whether there's a reason to enable these */ +/* SDL_SCANCODE_LOCKINGCAPSLOCK = 130, */ +/* SDL_SCANCODE_LOCKINGNUMLOCK = 131, */ +/* SDL_SCANCODE_LOCKINGSCROLLLOCK = 132, */ + SDL_SCANCODE_KP_COMMA = 133, + SDL_SCANCODE_KP_EQUALSAS400 = 134, + + SDL_SCANCODE_INTERNATIONAL1 = 135, /**< used on Asian keyboards, see + footnotes in USB doc */ + SDL_SCANCODE_INTERNATIONAL2 = 136, + SDL_SCANCODE_INTERNATIONAL3 = 137, /**< Yen */ + SDL_SCANCODE_INTERNATIONAL4 = 138, + SDL_SCANCODE_INTERNATIONAL5 = 139, + SDL_SCANCODE_INTERNATIONAL6 = 140, + SDL_SCANCODE_INTERNATIONAL7 = 141, + SDL_SCANCODE_INTERNATIONAL8 = 142, + SDL_SCANCODE_INTERNATIONAL9 = 143, + SDL_SCANCODE_LANG1 = 144, /**< Hangul/English toggle */ + SDL_SCANCODE_LANG2 = 145, /**< Hanja conversion */ + SDL_SCANCODE_LANG3 = 146, /**< Katakana */ + SDL_SCANCODE_LANG4 = 147, /**< Hiragana */ + SDL_SCANCODE_LANG5 = 148, /**< Zenkaku/Hankaku */ + SDL_SCANCODE_LANG6 = 149, /**< reserved */ + SDL_SCANCODE_LANG7 = 150, /**< reserved */ + SDL_SCANCODE_LANG8 = 151, /**< reserved */ + SDL_SCANCODE_LANG9 = 152, /**< reserved */ + + SDL_SCANCODE_ALTERASE = 153, /**< Erase-Eaze */ + SDL_SCANCODE_SYSREQ = 154, + SDL_SCANCODE_CANCEL = 155, + SDL_SCANCODE_CLEAR = 156, + SDL_SCANCODE_PRIOR = 157, + SDL_SCANCODE_RETURN2 = 158, + SDL_SCANCODE_SEPARATOR = 159, + SDL_SCANCODE_OUT = 160, + SDL_SCANCODE_OPER = 161, + SDL_SCANCODE_CLEARAGAIN = 162, + SDL_SCANCODE_CRSEL = 163, + SDL_SCANCODE_EXSEL = 164, + + SDL_SCANCODE_KP_00 = 176, + SDL_SCANCODE_KP_000 = 177, + SDL_SCANCODE_THOUSANDSSEPARATOR = 178, + SDL_SCANCODE_DECIMALSEPARATOR = 179, + SDL_SCANCODE_CURRENCYUNIT = 180, + SDL_SCANCODE_CURRENCYSUBUNIT = 181, + SDL_SCANCODE_KP_LEFTPAREN = 182, + SDL_SCANCODE_KP_RIGHTPAREN = 183, + SDL_SCANCODE_KP_LEFTBRACE = 184, + SDL_SCANCODE_KP_RIGHTBRACE = 185, + SDL_SCANCODE_KP_TAB = 186, + SDL_SCANCODE_KP_BACKSPACE = 187, + SDL_SCANCODE_KP_A = 188, + SDL_SCANCODE_KP_B = 189, + SDL_SCANCODE_KP_C = 190, + SDL_SCANCODE_KP_D = 191, + SDL_SCANCODE_KP_E = 192, + SDL_SCANCODE_KP_F = 193, + SDL_SCANCODE_KP_XOR = 194, + SDL_SCANCODE_KP_POWER = 195, + SDL_SCANCODE_KP_PERCENT = 196, + SDL_SCANCODE_KP_LESS = 197, + SDL_SCANCODE_KP_GREATER = 198, + SDL_SCANCODE_KP_AMPERSAND = 199, + SDL_SCANCODE_KP_DBLAMPERSAND = 200, + SDL_SCANCODE_KP_VERTICALBAR = 201, + SDL_SCANCODE_KP_DBLVERTICALBAR = 202, + SDL_SCANCODE_KP_COLON = 203, + SDL_SCANCODE_KP_HASH = 204, + SDL_SCANCODE_KP_SPACE = 205, + SDL_SCANCODE_KP_AT = 206, + SDL_SCANCODE_KP_EXCLAM = 207, + SDL_SCANCODE_KP_MEMSTORE = 208, + SDL_SCANCODE_KP_MEMRECALL = 209, + SDL_SCANCODE_KP_MEMCLEAR = 210, + SDL_SCANCODE_KP_MEMADD = 211, + SDL_SCANCODE_KP_MEMSUBTRACT = 212, + SDL_SCANCODE_KP_MEMMULTIPLY = 213, + SDL_SCANCODE_KP_MEMDIVIDE = 214, + SDL_SCANCODE_KP_PLUSMINUS = 215, + SDL_SCANCODE_KP_CLEAR = 216, + SDL_SCANCODE_KP_CLEARENTRY = 217, + SDL_SCANCODE_KP_BINARY = 218, + SDL_SCANCODE_KP_OCTAL = 219, + SDL_SCANCODE_KP_DECIMAL = 220, + SDL_SCANCODE_KP_HEXADECIMAL = 221, + + SDL_SCANCODE_LCTRL = 224, + SDL_SCANCODE_LSHIFT = 225, + SDL_SCANCODE_LALT = 226, /**< alt, option */ + SDL_SCANCODE_LGUI = 227, /**< windows, command (apple), meta */ + SDL_SCANCODE_RCTRL = 228, + SDL_SCANCODE_RSHIFT = 229, + SDL_SCANCODE_RALT = 230, /**< alt gr, option */ + SDL_SCANCODE_RGUI = 231, /**< windows, command (apple), meta */ + + SDL_SCANCODE_MODE = 257, /**< I'm not sure if this is really not covered + * by any of the above, but since there's a + * special KMOD_MODE for it I'm adding it here + */ + + /*@}*//*Usage page 0x07*/ + + /** + * \name Usage page 0x0C + * + * These values are mapped from usage page 0x0C (USB consumer page). + */ + /*@{*/ + + SDL_SCANCODE_AUDIONEXT = 258, + SDL_SCANCODE_AUDIOPREV = 259, + SDL_SCANCODE_AUDIOSTOP = 260, + SDL_SCANCODE_AUDIOPLAY = 261, + SDL_SCANCODE_AUDIOMUTE = 262, + SDL_SCANCODE_MEDIASELECT = 263, + SDL_SCANCODE_WWW = 264, + SDL_SCANCODE_MAIL = 265, + SDL_SCANCODE_CALCULATOR = 266, + SDL_SCANCODE_COMPUTER = 267, + SDL_SCANCODE_AC_SEARCH = 268, + SDL_SCANCODE_AC_HOME = 269, + SDL_SCANCODE_AC_BACK = 270, + SDL_SCANCODE_AC_FORWARD = 271, + SDL_SCANCODE_AC_STOP = 272, + SDL_SCANCODE_AC_REFRESH = 273, + SDL_SCANCODE_AC_BOOKMARKS = 274, + + /*@}*//*Usage page 0x0C*/ + + /** + * \name Walther keys + * + * These are values that Christian Walther added (for mac keyboard?). + */ + /*@{*/ + + SDL_SCANCODE_BRIGHTNESSDOWN = 275, + SDL_SCANCODE_BRIGHTNESSUP = 276, + SDL_SCANCODE_DISPLAYSWITCH = 277, /**< display mirroring/dual display + switch, video mode switch */ + SDL_SCANCODE_KBDILLUMTOGGLE = 278, + SDL_SCANCODE_KBDILLUMDOWN = 279, + SDL_SCANCODE_KBDILLUMUP = 280, + SDL_SCANCODE_EJECT = 281, + SDL_SCANCODE_SLEEP = 282, + + SDL_SCANCODE_APP1 = 283, + SDL_SCANCODE_APP2 = 284, + + /*@}*//*Walther keys*/ + + /* Add any other keys here. */ + + SDL_NUM_SCANCODES = 512 /**< not a key, just marks the number of scancodes + for array bounds */ +} SDL_Scancode; + +#endif /* _SDL_scancode_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_shape.h b/src/SDL2/SDL_shape.h new file mode 100644 index 000000000..63f850c94 --- /dev/null +++ b/src/SDL2/SDL_shape.h @@ -0,0 +1,143 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef _SDL_shape_h +#define _SDL_shape_h + +#include "SDL_stdinc.h" +#include "SDL_pixels.h" +#include "SDL_rect.h" +#include "SDL_surface.h" +#include "SDL_video.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** \file SDL_shape.h + * + * Header file for the shaped window API. + */ + +#define SDL_NONSHAPEABLE_WINDOW -1 +#define SDL_INVALID_SHAPE_ARGUMENT -2 +#define SDL_WINDOW_LACKS_SHAPE -3 + +/** + * \brief Create a window that can be shaped with the specified position, dimensions, and flags. + * + * \param title The title of the window, in UTF-8 encoding. + * \param x The x position of the window, ::SDL_WINDOWPOS_CENTERED, or + * ::SDL_WINDOWPOS_UNDEFINED. + * \param y The y position of the window, ::SDL_WINDOWPOS_CENTERED, or + * ::SDL_WINDOWPOS_UNDEFINED. + * \param w The width of the window. + * \param h The height of the window. + * \param flags The flags for the window, a mask of SDL_WINDOW_BORDERLESS with any of the following: + * ::SDL_WINDOW_OPENGL, ::SDL_WINDOW_INPUT_GRABBED, + * ::SDL_WINDOW_HIDDEN, ::SDL_WINDOW_RESIZABLE, + * ::SDL_WINDOW_MAXIMIZED, ::SDL_WINDOW_MINIMIZED, + * ::SDL_WINDOW_BORDERLESS is always set, and ::SDL_WINDOW_FULLSCREEN is always unset. + * + * \return The window created, or NULL if window creation failed. + * + * \sa SDL_DestroyWindow() + */ +extern DECLSPEC SDL_Window * SDLCALL SDL_CreateShapedWindow(const char *title,unsigned int x,unsigned int y,unsigned int w,unsigned int h,Uint32 flags); + +/** + * \brief Return whether the given window is a shaped window. + * + * \param window The window to query for being shaped. + * + * \return SDL_TRUE if the window is a window that can be shaped, SDL_FALSE if the window is unshaped or NULL. + * \sa SDL_CreateShapedWindow + */ +extern DECLSPEC SDL_bool SDLCALL SDL_IsShapedWindow(const SDL_Window *window); + +/** \brief An enum denoting the specific type of contents present in an SDL_WindowShapeParams union. */ +typedef enum { + /** \brief The default mode, a binarized alpha cutoff of 1. */ + ShapeModeDefault, + /** \brief A binarized alpha cutoff with a given integer value. */ + ShapeModeBinarizeAlpha, + /** \brief A binarized alpha cutoff with a given integer value, but with the opposite comparison. */ + ShapeModeReverseBinarizeAlpha, + /** \brief A color key is applied. */ + ShapeModeColorKey +} WindowShapeMode; + +#define SDL_SHAPEMODEALPHA(mode) (mode == ShapeModeDefault || mode == ShapeModeBinarizeAlpha || mode == ShapeModeReverseBinarizeAlpha) + +/** \brief A union containing parameters for shaped windows. */ +typedef union { + /** \brief a cutoff alpha value for binarization of the window shape's alpha channel. */ + Uint8 binarizationCutoff; + SDL_Color colorKey; +} SDL_WindowShapeParams; + +/** \brief A struct that tags the SDL_WindowShapeParams union with an enum describing the type of its contents. */ +typedef struct SDL_WindowShapeMode { + /** \brief The mode of these window-shape parameters. */ + WindowShapeMode mode; + /** \brief Window-shape parameters. */ + SDL_WindowShapeParams parameters; +} SDL_WindowShapeMode; + +/** + * \brief Set the shape and parameters of a shaped window. + * + * \param window The shaped window whose parameters should be set. + * \param shape A surface encoding the desired shape for the window. + * \param shape_mode The parameters to set for the shaped window. + * + * \return 0 on success, SDL_INVALID_SHAPE_ARGUMENT on invalid an invalid shape argument, or SDL_NONSHAPEABLE_WINDOW + * if the SDL_Window* given does not reference a valid shaped window. + * + * \sa SDL_WindowShapeMode + * \sa SDL_GetShapedWindowMode. + */ +extern DECLSPEC int SDLCALL SDL_SetWindowShape(SDL_Window *window,SDL_Surface *shape,SDL_WindowShapeMode *shape_mode); + +/** + * \brief Get the shape parameters of a shaped window. + * + * \param window The shaped window whose parameters should be retrieved. + * \param shape_mode An empty shape-mode structure to fill, or NULL to check whether the window has a shape. + * + * \return 0 if the window has a shape and, provided shape_mode was not NULL, shape_mode has been filled with the mode + * data, SDL_NONSHAPEABLE_WINDOW if the SDL_Window given is not a shaped window, or SDL_WINDOW_LACKS_SHAPE if + * the SDL_Window* given is a shapeable window currently lacking a shape. + * + * \sa SDL_WindowShapeMode + * \sa SDL_SetWindowShape + */ +extern DECLSPEC int SDLCALL SDL_GetShapedWindowMode(SDL_Window *window,SDL_WindowShapeMode *shape_mode); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_shape_h */ diff --git a/src/SDL2/SDL_stdinc.h b/src/SDL2/SDL_stdinc.h new file mode 100644 index 000000000..7fa9c1049 --- /dev/null +++ b/src/SDL2/SDL_stdinc.h @@ -0,0 +1,392 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_stdinc.h + * + * This is a general header that includes C language support. + */ + +#ifndef _SDL_stdinc_h +#define _SDL_stdinc_h + +#include "SDL_config.h" + +#ifdef HAVE_SYS_TYPES_H +#include +#endif +#ifdef HAVE_STDIO_H +#include +#endif +#if defined(STDC_HEADERS) +# include +# include +# include +#else +# if defined(HAVE_STDLIB_H) +# include +# elif defined(HAVE_MALLOC_H) +# include +# endif +# if defined(HAVE_STDDEF_H) +# include +# endif +# if defined(HAVE_STDARG_H) +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined(STDC_HEADERS) && defined(HAVE_MEMORY_H) +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#if defined(HAVE_INTTYPES_H) +# include +#elif defined(HAVE_STDINT_H) +# include +#endif +#ifdef HAVE_CTYPE_H +# include +#endif +#ifdef HAVE_MATH_H +# include +#endif +#if defined(HAVE_ICONV) && defined(HAVE_ICONV_H) +# include +#endif + +/** + * The number of elements in an array. + */ +#define SDL_arraysize(array) (sizeof(array)/sizeof(array[0])) +#define SDL_TABLESIZE(table) SDL_arraysize(table) + +/** + * \name Cast operators + * + * Use proper C++ casts when compiled as C++ to be compatible with the option + * -Wold-style-cast of GCC (and -Werror=old-style-cast in GCC 4.2 and above). + */ +/*@{*/ +#ifdef __cplusplus +#define SDL_reinterpret_cast(type, expression) reinterpret_cast(expression) +#define SDL_static_cast(type, expression) static_cast(expression) +#define SDL_const_cast(type, expression) const_cast(expression) +#else +#define SDL_reinterpret_cast(type, expression) ((type)(expression)) +#define SDL_static_cast(type, expression) ((type)(expression)) +#define SDL_const_cast(type, expression) ((type)(expression)) +#endif +/*@}*//*Cast operators*/ + +/* Define a four character code as a Uint32 */ +#define SDL_FOURCC(A, B, C, D) \ + ((SDL_static_cast(Uint32, SDL_static_cast(Uint8, (A))) << 0) | \ + (SDL_static_cast(Uint32, SDL_static_cast(Uint8, (B))) << 8) | \ + (SDL_static_cast(Uint32, SDL_static_cast(Uint8, (C))) << 16) | \ + (SDL_static_cast(Uint32, SDL_static_cast(Uint8, (D))) << 24)) + +/** + * \name Basic data types + */ +/*@{*/ + +typedef enum +{ + SDL_FALSE = 0, + SDL_TRUE = 1 +} SDL_bool; + +/** + * \brief A signed 8-bit integer type. + */ +typedef int8_t Sint8; +/** + * \brief An unsigned 8-bit integer type. + */ +typedef uint8_t Uint8; +/** + * \brief A signed 16-bit integer type. + */ +typedef int16_t Sint16; +/** + * \brief An unsigned 16-bit integer type. + */ +typedef uint16_t Uint16; +/** + * \brief A signed 32-bit integer type. + */ +typedef int32_t Sint32; +/** + * \brief An unsigned 32-bit integer type. + */ +typedef uint32_t Uint32; + +/** + * \brief A signed 64-bit integer type. + */ +typedef int64_t Sint64; +/** + * \brief An unsigned 64-bit integer type. + */ +typedef uint64_t Uint64; + +/*@}*//*Basic data types*/ + + +#define SDL_COMPILE_TIME_ASSERT(name, x) \ + typedef int SDL_dummy_ ## name[(x) * 2 - 1] +/** \cond */ +#ifndef DOXYGEN_SHOULD_IGNORE_THIS +SDL_COMPILE_TIME_ASSERT(uint8, sizeof(Uint8) == 1); +SDL_COMPILE_TIME_ASSERT(sint8, sizeof(Sint8) == 1); +SDL_COMPILE_TIME_ASSERT(uint16, sizeof(Uint16) == 2); +SDL_COMPILE_TIME_ASSERT(sint16, sizeof(Sint16) == 2); +SDL_COMPILE_TIME_ASSERT(uint32, sizeof(Uint32) == 4); +SDL_COMPILE_TIME_ASSERT(sint32, sizeof(Sint32) == 4); +SDL_COMPILE_TIME_ASSERT(uint64, sizeof(Uint64) == 8); +SDL_COMPILE_TIME_ASSERT(sint64, sizeof(Sint64) == 8); +#endif /* DOXYGEN_SHOULD_IGNORE_THIS */ +/** \endcond */ + +/* Check to make sure enums are the size of ints, for structure packing. + For both Watcom C/C++ and Borland C/C++ the compiler option that makes + enums having the size of an int must be enabled. + This is "-b" for Borland C/C++ and "-ei" for Watcom C/C++ (v11). +*/ + +/** \cond */ +#ifndef DOXYGEN_SHOULD_IGNORE_THIS +#if !defined(__ANDROID__) + /* TODO: include/SDL_stdinc.h:174: error: size of array 'SDL_dummy_enum' is negative */ +typedef enum +{ + DUMMY_ENUM_VALUE +} SDL_DUMMY_ENUM; + +SDL_COMPILE_TIME_ASSERT(enum, sizeof(SDL_DUMMY_ENUM) == sizeof(int)); +#endif +#endif /* DOXYGEN_SHOULD_IGNORE_THIS */ +/** \endcond */ + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(HAVE_ALLOCA) && !defined(alloca) +# if defined(HAVE_ALLOCA_H) +# include +# elif defined(__GNUC__) +# define alloca __builtin_alloca +# elif defined(_MSC_VER) +# include +# define alloca _alloca +# elif defined(__WATCOMC__) +# include +# elif defined(__BORLANDC__) +# include +# elif defined(__DMC__) +# include +# elif defined(__AIX__) +#pragma alloca +# elif defined(__MRC__) +void *alloca(unsigned); +# else +char *alloca(); +# endif +#endif +#ifdef HAVE_ALLOCA +#define SDL_stack_alloc(type, count) (type*)alloca(sizeof(type)*(count)) +#define SDL_stack_free(data) +#else +#define SDL_stack_alloc(type, count) (type*)SDL_malloc(sizeof(type)*(count)) +#define SDL_stack_free(data) SDL_free(data) +#endif + +extern DECLSPEC void *SDLCALL SDL_malloc(size_t size); +extern DECLSPEC void *SDLCALL SDL_calloc(size_t nmemb, size_t size); +extern DECLSPEC void *SDLCALL SDL_realloc(void *mem, size_t size); +extern DECLSPEC void SDLCALL SDL_free(void *mem); + +extern DECLSPEC char *SDLCALL SDL_getenv(const char *name); +extern DECLSPEC int SDLCALL SDL_setenv(const char *name, const char *value, int overwrite); + +extern DECLSPEC void SDLCALL SDL_qsort(void *base, size_t nmemb, size_t size, int (*compare) (const void *, const void *)); + +extern DECLSPEC int SDLCALL SDL_abs(int x); + +/* !!! FIXME: these have side effects. You probably shouldn't use them. */ +/* !!! FIXME: Maybe we do forceinline functions of SDL_mini, SDL_minf, etc? */ +#define SDL_min(x, y) (((x) < (y)) ? (x) : (y)) +#define SDL_max(x, y) (((x) > (y)) ? (x) : (y)) + +extern DECLSPEC int SDLCALL SDL_isdigit(int x); +extern DECLSPEC int SDLCALL SDL_isspace(int x); +extern DECLSPEC int SDLCALL SDL_toupper(int x); +extern DECLSPEC int SDLCALL SDL_tolower(int x); + +extern DECLSPEC void *SDLCALL SDL_memset(void *dst, int c, size_t len); + +#define SDL_zero(x) SDL_memset(&(x), 0, sizeof((x))) +#define SDL_zerop(x) SDL_memset((x), 0, sizeof(*(x))) + +/* Note that memset() is a byte assignment and this is a 32-bit assignment, so they're not directly equivalent. */ +SDL_FORCE_INLINE void SDL_memset4(void *dst, int val, size_t dwords) +{ +#if defined(__GNUC__) && defined(i386) + int u0, u1, u2; + __asm__ __volatile__ ( + "cld \n\t" + "rep ; stosl \n\t" + : "=&D" (u0), "=&a" (u1), "=&c" (u2) + : "0" (dst), "1" (val), "2" (SDL_static_cast(Uint32, dwords)) + : "memory" + ); +#else + size_t _n = (dwords + 3) / 4; + Uint32 *_p = SDL_static_cast(Uint32 *, dst); + Uint32 _val = (val); + if (dwords == 0) + return; + switch (dwords % 4) + { + case 0: do { *_p++ = _val; + case 3: *_p++ = _val; + case 2: *_p++ = _val; + case 1: *_p++ = _val; + } while ( --_n ); + } +#endif +} + + +extern DECLSPEC void *SDLCALL SDL_memcpy(void *dst, const void *src, size_t len); + +SDL_FORCE_INLINE void *SDL_memcpy4(void *dst, const void *src, size_t dwords) +{ + return SDL_memcpy(dst, src, dwords * 4); +} + +extern DECLSPEC void *SDLCALL SDL_memmove(void *dst, const void *src, size_t len); +extern DECLSPEC int SDLCALL SDL_memcmp(const void *s1, const void *s2, size_t len); + +extern DECLSPEC size_t SDLCALL SDL_wcslen(const wchar_t *wstr); +extern DECLSPEC size_t SDLCALL SDL_wcslcpy(wchar_t *dst, const wchar_t *src, size_t maxlen); +extern DECLSPEC size_t SDLCALL SDL_wcslcat(wchar_t *dst, const wchar_t *src, size_t maxlen); + +extern DECLSPEC size_t SDLCALL SDL_strlen(const char *str); +extern DECLSPEC size_t SDLCALL SDL_strlcpy(char *dst, const char *src, size_t maxlen); +extern DECLSPEC size_t SDLCALL SDL_utf8strlcpy(char *dst, const char *src, size_t dst_bytes); +extern DECLSPEC size_t SDLCALL SDL_strlcat(char *dst, const char *src, size_t maxlen); +extern DECLSPEC char *SDLCALL SDL_strdup(const char *str); +extern DECLSPEC char *SDLCALL SDL_strrev(char *str); +extern DECLSPEC char *SDLCALL SDL_strupr(char *str); +extern DECLSPEC char *SDLCALL SDL_strlwr(char *str); +extern DECLSPEC char *SDLCALL SDL_strchr(const char *str, int c); +extern DECLSPEC char *SDLCALL SDL_strrchr(const char *str, int c); +extern DECLSPEC char *SDLCALL SDL_strstr(const char *haystack, const char *needle); + +extern DECLSPEC char *SDLCALL SDL_itoa(int value, char *str, int radix); +extern DECLSPEC char *SDLCALL SDL_uitoa(unsigned int value, char *str, int radix); +extern DECLSPEC char *SDLCALL SDL_ltoa(long value, char *str, int radix); +extern DECLSPEC char *SDLCALL SDL_ultoa(unsigned long value, char *str, int radix); +extern DECLSPEC char *SDLCALL SDL_lltoa(Sint64 value, char *str, int radix); +extern DECLSPEC char *SDLCALL SDL_ulltoa(Uint64 value, char *str, int radix); + +extern DECLSPEC int SDLCALL SDL_atoi(const char *str); +extern DECLSPEC double SDLCALL SDL_atof(const char *str); +extern DECLSPEC long SDLCALL SDL_strtol(const char *str, char **endp, int base); +extern DECLSPEC unsigned long SDLCALL SDL_strtoul(const char *str, char **endp, int base); +extern DECLSPEC Sint64 SDLCALL SDL_strtoll(const char *str, char **endp, int base); +extern DECLSPEC Uint64 SDLCALL SDL_strtoull(const char *str, char **endp, int base); +extern DECLSPEC double SDLCALL SDL_strtod(const char *str, char **endp); + +extern DECLSPEC int SDLCALL SDL_strcmp(const char *str1, const char *str2); +extern DECLSPEC int SDLCALL SDL_strncmp(const char *str1, const char *str2, size_t maxlen); +extern DECLSPEC int SDLCALL SDL_strcasecmp(const char *str1, const char *str2); +extern DECLSPEC int SDLCALL SDL_strncasecmp(const char *str1, const char *str2, size_t len); + +extern DECLSPEC int SDLCALL SDL_sscanf(const char *text, const char *fmt, ...); +extern DECLSPEC int SDLCALL SDL_snprintf(char *text, size_t maxlen, const char *fmt, ...); +extern DECLSPEC int SDLCALL SDL_vsnprintf(char *text, size_t maxlen, const char *fmt, va_list ap); + +#ifndef HAVE_M_PI +#ifndef M_PI +#define M_PI 3.14159265358979323846264338327950288 /* pi */ +#endif +#endif + +extern DECLSPEC double SDLCALL SDL_atan(double x); +extern DECLSPEC double SDLCALL SDL_atan2(double x, double y); +extern DECLSPEC double SDLCALL SDL_ceil(double x); +extern DECLSPEC double SDLCALL SDL_copysign(double x, double y); +extern DECLSPEC double SDLCALL SDL_cos(double x); +extern DECLSPEC float SDLCALL SDL_cosf(float x); +extern DECLSPEC double SDLCALL SDL_fabs(double x); +extern DECLSPEC double SDLCALL SDL_floor(double x); +extern DECLSPEC double SDLCALL SDL_log(double x); +extern DECLSPEC double SDLCALL SDL_pow(double x, double y); +extern DECLSPEC double SDLCALL SDL_scalbn(double x, int n); +extern DECLSPEC double SDLCALL SDL_sin(double x); +extern DECLSPEC float SDLCALL SDL_sinf(float x); +extern DECLSPEC double SDLCALL SDL_sqrt(double x); + +/* The SDL implementation of iconv() returns these error codes */ +#define SDL_ICONV_ERROR (size_t)-1 +#define SDL_ICONV_E2BIG (size_t)-2 +#define SDL_ICONV_EILSEQ (size_t)-3 +#define SDL_ICONV_EINVAL (size_t)-4 + +/* SDL_iconv_* are now always real symbols/types, not macros or inlined. */ +typedef struct _SDL_iconv_t *SDL_iconv_t; +extern DECLSPEC SDL_iconv_t SDLCALL SDL_iconv_open(const char *tocode, + const char *fromcode); +extern DECLSPEC int SDLCALL SDL_iconv_close(SDL_iconv_t cd); +extern DECLSPEC size_t SDLCALL SDL_iconv(SDL_iconv_t cd, const char **inbuf, + size_t * inbytesleft, char **outbuf, + size_t * outbytesleft); +/** + * This function converts a string between encodings in one pass, returning a + * string that must be freed with SDL_free() or NULL on error. + */ +extern DECLSPEC char *SDLCALL SDL_iconv_string(const char *tocode, + const char *fromcode, + const char *inbuf, + size_t inbytesleft); +#define SDL_iconv_utf8_locale(S) SDL_iconv_string("", "UTF-8", S, SDL_strlen(S)+1) +#define SDL_iconv_utf8_ucs2(S) (Uint16 *)SDL_iconv_string("UCS-2-INTERNAL", "UTF-8", S, SDL_strlen(S)+1) +#define SDL_iconv_utf8_ucs4(S) (Uint32 *)SDL_iconv_string("UCS-4-INTERNAL", "UTF-8", S, SDL_strlen(S)+1) + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_stdinc_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_surface.h b/src/SDL2/SDL_surface.h new file mode 100644 index 000000000..fece79743 --- /dev/null +++ b/src/SDL2/SDL_surface.h @@ -0,0 +1,503 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_surface.h + * + * Header file for ::SDL_Surface definition and management functions. + */ + +#ifndef _SDL_surface_h +#define _SDL_surface_h + +#include "SDL_stdinc.h" +#include "SDL_pixels.h" +#include "SDL_rect.h" +#include "SDL_blendmode.h" +#include "SDL_rwops.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \name Surface flags + * + * These are the currently supported flags for the ::SDL_Surface. + * + * \internal + * Used internally (read-only). + */ +/*@{*/ +#define SDL_SWSURFACE 0 /**< Just here for compatibility */ +#define SDL_PREALLOC 0x00000001 /**< Surface uses preallocated memory */ +#define SDL_RLEACCEL 0x00000002 /**< Surface is RLE encoded */ +#define SDL_DONTFREE 0x00000004 /**< Surface is referenced internally */ +/*@}*//*Surface flags*/ + +/** + * Evaluates to true if the surface needs to be locked before access. + */ +#define SDL_MUSTLOCK(S) (((S)->flags & SDL_RLEACCEL) != 0) + +/** + * \brief A collection of pixels used in software blitting. + * + * \note This structure should be treated as read-only, except for \c pixels, + * which, if not NULL, contains the raw pixel data for the surface. + */ +typedef struct SDL_Surface +{ + Uint32 flags; /**< Read-only */ + SDL_PixelFormat *format; /**< Read-only */ + int w, h; /**< Read-only */ + int pitch; /**< Read-only */ + void *pixels; /**< Read-write */ + + /** Application data associated with the surface */ + void *userdata; /**< Read-write */ + + /** information needed for surfaces requiring locks */ + int locked; /**< Read-only */ + void *lock_data; /**< Read-only */ + + /** clipping information */ + SDL_Rect clip_rect; /**< Read-only */ + + /** info for fast blit mapping to other surfaces */ + struct SDL_BlitMap *map; /**< Private */ + + /** Reference count -- used when freeing surface */ + int refcount; /**< Read-mostly */ +} SDL_Surface; + +/** + * \brief The type of function used for surface blitting functions. + */ +typedef int (*SDL_blit) (struct SDL_Surface * src, SDL_Rect * srcrect, + struct SDL_Surface * dst, SDL_Rect * dstrect); + +/** + * Allocate and free an RGB surface. + * + * If the depth is 4 or 8 bits, an empty palette is allocated for the surface. + * If the depth is greater than 8 bits, the pixel format is set using the + * flags '[RGB]mask'. + * + * If the function runs out of memory, it will return NULL. + * + * \param flags The \c flags are obsolete and should be set to 0. + * \param width The width in pixels of the surface to create. + * \param height The height in pixels of the surface to create. + * \param depth The depth in bits of the surface to create. + * \param Rmask The red mask of the surface to create. + * \param Gmask The green mask of the surface to create. + * \param Bmask The blue mask of the surface to create. + * \param Amask The alpha mask of the surface to create. + */ +extern DECLSPEC SDL_Surface *SDLCALL SDL_CreateRGBSurface + (Uint32 flags, int width, int height, int depth, + Uint32 Rmask, Uint32 Gmask, Uint32 Bmask, Uint32 Amask); +extern DECLSPEC SDL_Surface *SDLCALL SDL_CreateRGBSurfaceFrom(void *pixels, + int width, + int height, + int depth, + int pitch, + Uint32 Rmask, + Uint32 Gmask, + Uint32 Bmask, + Uint32 Amask); +extern DECLSPEC void SDLCALL SDL_FreeSurface(SDL_Surface * surface); + +/** + * \brief Set the palette used by a surface. + * + * \return 0, or -1 if the surface format doesn't use a palette. + * + * \note A single palette can be shared with many surfaces. + */ +extern DECLSPEC int SDLCALL SDL_SetSurfacePalette(SDL_Surface * surface, + SDL_Palette * palette); + +/** + * \brief Sets up a surface for directly accessing the pixels. + * + * Between calls to SDL_LockSurface() / SDL_UnlockSurface(), you can write + * to and read from \c surface->pixels, using the pixel format stored in + * \c surface->format. Once you are done accessing the surface, you should + * use SDL_UnlockSurface() to release it. + * + * Not all surfaces require locking. If SDL_MUSTLOCK(surface) evaluates + * to 0, then you can read and write to the surface at any time, and the + * pixel format of the surface will not change. + * + * No operating system or library calls should be made between lock/unlock + * pairs, as critical system locks may be held during this time. + * + * SDL_LockSurface() returns 0, or -1 if the surface couldn't be locked. + * + * \sa SDL_UnlockSurface() + */ +extern DECLSPEC int SDLCALL SDL_LockSurface(SDL_Surface * surface); +/** \sa SDL_LockSurface() */ +extern DECLSPEC void SDLCALL SDL_UnlockSurface(SDL_Surface * surface); + +/** + * Load a surface from a seekable SDL data stream (memory or file). + * + * If \c freesrc is non-zero, the stream will be closed after being read. + * + * The new surface should be freed with SDL_FreeSurface(). + * + * \return the new surface, or NULL if there was an error. + */ +extern DECLSPEC SDL_Surface *SDLCALL SDL_LoadBMP_RW(SDL_RWops * src, + int freesrc); + +/** + * Load a surface from a file. + * + * Convenience macro. + */ +#define SDL_LoadBMP(file) SDL_LoadBMP_RW(SDL_RWFromFile(file, "rb"), 1) + +/** + * Save a surface to a seekable SDL data stream (memory or file). + * + * If \c freedst is non-zero, the stream will be closed after being written. + * + * \return 0 if successful or -1 if there was an error. + */ +extern DECLSPEC int SDLCALL SDL_SaveBMP_RW + (SDL_Surface * surface, SDL_RWops * dst, int freedst); + +/** + * Save a surface to a file. + * + * Convenience macro. + */ +#define SDL_SaveBMP(surface, file) \ + SDL_SaveBMP_RW(surface, SDL_RWFromFile(file, "wb"), 1) + +/** + * \brief Sets the RLE acceleration hint for a surface. + * + * \return 0 on success, or -1 if the surface is not valid + * + * \note If RLE is enabled, colorkey and alpha blending blits are much faster, + * but the surface must be locked before directly accessing the pixels. + */ +extern DECLSPEC int SDLCALL SDL_SetSurfaceRLE(SDL_Surface * surface, + int flag); + +/** + * \brief Sets the color key (transparent pixel) in a blittable surface. + * + * \param surface The surface to update + * \param flag Non-zero to enable colorkey and 0 to disable colorkey + * \param key The transparent pixel in the native surface format + * + * \return 0 on success, or -1 if the surface is not valid + * + * You can pass SDL_RLEACCEL to enable RLE accelerated blits. + */ +extern DECLSPEC int SDLCALL SDL_SetColorKey(SDL_Surface * surface, + int flag, Uint32 key); + +/** + * \brief Gets the color key (transparent pixel) in a blittable surface. + * + * \param surface The surface to update + * \param key A pointer filled in with the transparent pixel in the native + * surface format + * + * \return 0 on success, or -1 if the surface is not valid or colorkey is not + * enabled. + */ +extern DECLSPEC int SDLCALL SDL_GetColorKey(SDL_Surface * surface, + Uint32 * key); + +/** + * \brief Set an additional color value used in blit operations. + * + * \param surface The surface to update. + * \param r The red color value multiplied into blit operations. + * \param g The green color value multiplied into blit operations. + * \param b The blue color value multiplied into blit operations. + * + * \return 0 on success, or -1 if the surface is not valid. + * + * \sa SDL_GetSurfaceColorMod() + */ +extern DECLSPEC int SDLCALL SDL_SetSurfaceColorMod(SDL_Surface * surface, + Uint8 r, Uint8 g, Uint8 b); + + +/** + * \brief Get the additional color value used in blit operations. + * + * \param surface The surface to query. + * \param r A pointer filled in with the current red color value. + * \param g A pointer filled in with the current green color value. + * \param b A pointer filled in with the current blue color value. + * + * \return 0 on success, or -1 if the surface is not valid. + * + * \sa SDL_SetSurfaceColorMod() + */ +extern DECLSPEC int SDLCALL SDL_GetSurfaceColorMod(SDL_Surface * surface, + Uint8 * r, Uint8 * g, + Uint8 * b); + +/** + * \brief Set an additional alpha value used in blit operations. + * + * \param surface The surface to update. + * \param alpha The alpha value multiplied into blit operations. + * + * \return 0 on success, or -1 if the surface is not valid. + * + * \sa SDL_GetSurfaceAlphaMod() + */ +extern DECLSPEC int SDLCALL SDL_SetSurfaceAlphaMod(SDL_Surface * surface, + Uint8 alpha); + +/** + * \brief Get the additional alpha value used in blit operations. + * + * \param surface The surface to query. + * \param alpha A pointer filled in with the current alpha value. + * + * \return 0 on success, or -1 if the surface is not valid. + * + * \sa SDL_SetSurfaceAlphaMod() + */ +extern DECLSPEC int SDLCALL SDL_GetSurfaceAlphaMod(SDL_Surface * surface, + Uint8 * alpha); + +/** + * \brief Set the blend mode used for blit operations. + * + * \param surface The surface to update. + * \param blendMode ::SDL_BlendMode to use for blit blending. + * + * \return 0 on success, or -1 if the parameters are not valid. + * + * \sa SDL_GetSurfaceBlendMode() + */ +extern DECLSPEC int SDLCALL SDL_SetSurfaceBlendMode(SDL_Surface * surface, + SDL_BlendMode blendMode); + +/** + * \brief Get the blend mode used for blit operations. + * + * \param surface The surface to query. + * \param blendMode A pointer filled in with the current blend mode. + * + * \return 0 on success, or -1 if the surface is not valid. + * + * \sa SDL_SetSurfaceBlendMode() + */ +extern DECLSPEC int SDLCALL SDL_GetSurfaceBlendMode(SDL_Surface * surface, + SDL_BlendMode *blendMode); + +/** + * Sets the clipping rectangle for the destination surface in a blit. + * + * If the clip rectangle is NULL, clipping will be disabled. + * + * If the clip rectangle doesn't intersect the surface, the function will + * return SDL_FALSE and blits will be completely clipped. Otherwise the + * function returns SDL_TRUE and blits to the surface will be clipped to + * the intersection of the surface area and the clipping rectangle. + * + * Note that blits are automatically clipped to the edges of the source + * and destination surfaces. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_SetClipRect(SDL_Surface * surface, + const SDL_Rect * rect); + +/** + * Gets the clipping rectangle for the destination surface in a blit. + * + * \c rect must be a pointer to a valid rectangle which will be filled + * with the correct values. + */ +extern DECLSPEC void SDLCALL SDL_GetClipRect(SDL_Surface * surface, + SDL_Rect * rect); + +/** + * Creates a new surface of the specified format, and then copies and maps + * the given surface to it so the blit of the converted surface will be as + * fast as possible. If this function fails, it returns NULL. + * + * The \c flags parameter is passed to SDL_CreateRGBSurface() and has those + * semantics. You can also pass ::SDL_RLEACCEL in the flags parameter and + * SDL will try to RLE accelerate colorkey and alpha blits in the resulting + * surface. + */ +extern DECLSPEC SDL_Surface *SDLCALL SDL_ConvertSurface + (SDL_Surface * src, SDL_PixelFormat * fmt, Uint32 flags); +extern DECLSPEC SDL_Surface *SDLCALL SDL_ConvertSurfaceFormat + (SDL_Surface * src, Uint32 pixel_format, Uint32 flags); + +/** + * \brief Copy a block of pixels of one format to another format + * + * \return 0 on success, or -1 if there was an error + */ +extern DECLSPEC int SDLCALL SDL_ConvertPixels(int width, int height, + Uint32 src_format, + const void * src, int src_pitch, + Uint32 dst_format, + void * dst, int dst_pitch); + +/** + * Performs a fast fill of the given rectangle with \c color. + * + * If \c rect is NULL, the whole surface will be filled with \c color. + * + * The color should be a pixel of the format used by the surface, and + * can be generated by the SDL_MapRGB() function. + * + * \return 0 on success, or -1 on error. + */ +extern DECLSPEC int SDLCALL SDL_FillRect + (SDL_Surface * dst, const SDL_Rect * rect, Uint32 color); +extern DECLSPEC int SDLCALL SDL_FillRects + (SDL_Surface * dst, const SDL_Rect * rects, int count, Uint32 color); + +/** + * Performs a fast blit from the source surface to the destination surface. + * + * This assumes that the source and destination rectangles are + * the same size. If either \c srcrect or \c dstrect are NULL, the entire + * surface (\c src or \c dst) is copied. The final blit rectangles are saved + * in \c srcrect and \c dstrect after all clipping is performed. + * + * \return If the blit is successful, it returns 0, otherwise it returns -1. + * + * The blit function should not be called on a locked surface. + * + * The blit semantics for surfaces with and without blending and colorkey + * are defined as follows: + * \verbatim + RGBA->RGB: + Source surface blend mode set to SDL_BLENDMODE_BLEND: + alpha-blend (using the source alpha-channel and per-surface alpha) + SDL_SRCCOLORKEY ignored. + Source surface blend mode set to SDL_BLENDMODE_NONE: + copy RGB. + if SDL_SRCCOLORKEY set, only copy the pixels matching the + RGB values of the source color key, ignoring alpha in the + comparison. + + RGB->RGBA: + Source surface blend mode set to SDL_BLENDMODE_BLEND: + alpha-blend (using the source per-surface alpha) + Source surface blend mode set to SDL_BLENDMODE_NONE: + copy RGB, set destination alpha to source per-surface alpha value. + both: + if SDL_SRCCOLORKEY set, only copy the pixels matching the + source color key. + + RGBA->RGBA: + Source surface blend mode set to SDL_BLENDMODE_BLEND: + alpha-blend (using the source alpha-channel and per-surface alpha) + SDL_SRCCOLORKEY ignored. + Source surface blend mode set to SDL_BLENDMODE_NONE: + copy all of RGBA to the destination. + if SDL_SRCCOLORKEY set, only copy the pixels matching the + RGB values of the source color key, ignoring alpha in the + comparison. + + RGB->RGB: + Source surface blend mode set to SDL_BLENDMODE_BLEND: + alpha-blend (using the source per-surface alpha) + Source surface blend mode set to SDL_BLENDMODE_NONE: + copy RGB. + both: + if SDL_SRCCOLORKEY set, only copy the pixels matching the + source color key. + \endverbatim + * + * You should call SDL_BlitSurface() unless you know exactly how SDL + * blitting works internally and how to use the other blit functions. + */ +#define SDL_BlitSurface SDL_UpperBlit + +/** + * This is the public blit function, SDL_BlitSurface(), and it performs + * rectangle validation and clipping before passing it to SDL_LowerBlit() + */ +extern DECLSPEC int SDLCALL SDL_UpperBlit + (SDL_Surface * src, const SDL_Rect * srcrect, + SDL_Surface * dst, SDL_Rect * dstrect); + +/** + * This is a semi-private blit function and it performs low-level surface + * blitting only. + */ +extern DECLSPEC int SDLCALL SDL_LowerBlit + (SDL_Surface * src, SDL_Rect * srcrect, + SDL_Surface * dst, SDL_Rect * dstrect); + +/** + * \brief Perform a fast, low quality, stretch blit between two surfaces of the + * same pixel format. + * + * \note This function uses a static buffer, and is not thread-safe. + */ +extern DECLSPEC int SDLCALL SDL_SoftStretch(SDL_Surface * src, + const SDL_Rect * srcrect, + SDL_Surface * dst, + const SDL_Rect * dstrect); + +#define SDL_BlitScaled SDL_UpperBlitScaled + +/** + * This is the public scaled blit function, SDL_BlitScaled(), and it performs + * rectangle validation and clipping before passing it to SDL_LowerBlitScaled() + */ +extern DECLSPEC int SDLCALL SDL_UpperBlitScaled + (SDL_Surface * src, const SDL_Rect * srcrect, + SDL_Surface * dst, SDL_Rect * dstrect); + +/** + * This is a semi-private blit function and it performs low-level surface + * scaled blitting only. + */ +extern DECLSPEC int SDLCALL SDL_LowerBlitScaled + (SDL_Surface * src, SDL_Rect * srcrect, + SDL_Surface * dst, SDL_Rect * dstrect); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_surface_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_system.h b/src/SDL2/SDL_system.h new file mode 100644 index 000000000..26e9eaa0a --- /dev/null +++ b/src/SDL2/SDL_system.h @@ -0,0 +1,105 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_system.h + * + * Include file for platform specific SDL API functions + */ + +#ifndef _SDL_system_h +#define _SDL_system_h + +#include "SDL_stdinc.h" + +#if defined(__IPHONEOS__) && __IPHONEOS__ +#include "SDL_video.h" +#include "SDL_keyboard.h" +#endif + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* Platform specific functions for iOS */ +#if defined(__IPHONEOS__) && __IPHONEOS__ + +extern DECLSPEC int SDLCALL SDL_iPhoneSetAnimationCallback(SDL_Window * window, int interval, void (*callback)(void*), void *callbackParam); +extern DECLSPEC void SDLCALL SDL_iPhoneSetEventPump(SDL_bool enabled); + +#endif /* __IPHONEOS__ */ + + +/* Platform specific functions for Android */ +#if defined(__ANDROID__) && __ANDROID__ + +/* Get the JNI environment for the current thread + This returns JNIEnv*, but the prototype is void* so we don't need jni.h + */ +extern DECLSPEC void * SDLCALL SDL_AndroidGetJNIEnv(); + +/* Get the SDL Activity object for the application + This returns jobject, but the prototype is void* so we don't need jni.h + The jobject returned by SDL_AndroidGetActivity is a local reference. + It is the caller's responsibility to properly release it + (using env->Push/PopLocalFrame or manually with env->DeleteLocalRef) + */ +extern DECLSPEC void * SDLCALL SDL_AndroidGetActivity(); + +/* See the official Android developer guide for more information: + http://developer.android.com/guide/topics/data/data-storage.html +*/ +#define SDL_ANDROID_EXTERNAL_STORAGE_READ 0x01 +#define SDL_ANDROID_EXTERNAL_STORAGE_WRITE 0x02 + +/* Get the path used for internal storage for this application. + This path is unique to your application and cannot be written to + by other applications. + */ +extern DECLSPEC const char * SDLCALL SDL_AndroidGetInternalStoragePath(); + +/* Get the current state of external storage, a bitmask of these values: + SDL_ANDROID_EXTERNAL_STORAGE_READ + SDL_ANDROID_EXTERNAL_STORAGE_WRITE + If external storage is currently unavailable, this will return 0. +*/ +extern DECLSPEC int SDLCALL SDL_AndroidGetExternalStorageState(); + +/* Get the path used for external storage for this application. + This path is unique to your application, but is public and can be + written to by other applications. + */ +extern DECLSPEC const char * SDLCALL SDL_AndroidGetExternalStoragePath(); + +#endif /* __ANDROID__ */ + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_system_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_syswm.h b/src/SDL2/SDL_syswm.h new file mode 100644 index 000000000..5e4454f86 --- /dev/null +++ b/src/SDL2/SDL_syswm.h @@ -0,0 +1,237 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_syswm.h + * + * Include file for SDL custom system window manager hooks. + */ + +#ifndef _SDL_syswm_h +#define _SDL_syswm_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_video.h" +#include "SDL_version.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \file SDL_syswm.h + * + * Your application has access to a special type of event ::SDL_SYSWMEVENT, + * which contains window-manager specific information and arrives whenever + * an unhandled window event occurs. This event is ignored by default, but + * you can enable it with SDL_EventState(). + */ +#ifdef SDL_PROTOTYPES_ONLY +struct SDL_SysWMinfo; +#else + +#if defined(SDL_VIDEO_DRIVER_WINDOWS) +#define WIN32_LEAN_AND_MEAN +#include +#endif + +/* This is the structure for custom window manager events */ +#if defined(SDL_VIDEO_DRIVER_X11) +#if defined(__APPLE__) && defined(__MACH__) +/* conflicts with Quickdraw.h */ +#define Cursor X11Cursor +#endif + +#include +#include + +#if defined(__APPLE__) && defined(__MACH__) +/* matches the re-define above */ +#undef Cursor +#endif + +#endif /* defined(SDL_VIDEO_DRIVER_X11) */ + +#if defined(SDL_VIDEO_DRIVER_DIRECTFB) +#include +#endif + +#if defined(SDL_VIDEO_DRIVER_COCOA) +#ifdef __OBJC__ +#include +#else +typedef struct _NSWindow NSWindow; +#endif +#endif + +#if defined(SDL_VIDEO_DRIVER_UIKIT) +#ifdef __OBJC__ +#include +#else +typedef struct _UIWindow UIWindow; +#endif +#endif + +/** + * These are the various supported windowing subsystems + */ +typedef enum +{ + SDL_SYSWM_UNKNOWN, + SDL_SYSWM_WINDOWS, + SDL_SYSWM_X11, + SDL_SYSWM_DIRECTFB, + SDL_SYSWM_COCOA, + SDL_SYSWM_UIKIT, +} SDL_SYSWM_TYPE; + +/** + * The custom event structure. + */ +struct SDL_SysWMmsg +{ + SDL_version version; + SDL_SYSWM_TYPE subsystem; + union + { +#if defined(SDL_VIDEO_DRIVER_WINDOWS) + struct { + HWND hwnd; /**< The window for the message */ + UINT msg; /**< The type of message */ + WPARAM wParam; /**< WORD message parameter */ + LPARAM lParam; /**< LONG message parameter */ + } win; +#endif +#if defined(SDL_VIDEO_DRIVER_X11) + struct { + XEvent event; + } x11; +#endif +#if defined(SDL_VIDEO_DRIVER_DIRECTFB) + struct { + DFBEvent event; + } dfb; +#endif +#if defined(SDL_VIDEO_DRIVER_COCOA) + struct + { + /* No Cocoa window events yet */ + } cocoa; +#endif +#if defined(SDL_VIDEO_DRIVER_UIKIT) + struct + { + /* No UIKit window events yet */ + } uikit; +#endif + /* Can't have an empty union */ + int dummy; + } msg; +}; + +/** + * The custom window manager information structure. + * + * When this structure is returned, it holds information about which + * low level system it is using, and will be one of SDL_SYSWM_TYPE. + */ +struct SDL_SysWMinfo +{ + SDL_version version; + SDL_SYSWM_TYPE subsystem; + union + { +#if defined(SDL_VIDEO_DRIVER_WINDOWS) + struct + { + HWND window; /**< The window handle */ + } win; +#endif +#if defined(SDL_VIDEO_DRIVER_X11) + struct + { + Display *display; /**< The X11 display */ + Window window; /**< The X11 window */ + } x11; +#endif +#if defined(SDL_VIDEO_DRIVER_DIRECTFB) + struct + { + IDirectFB *dfb; /**< The directfb main interface */ + IDirectFBWindow *window; /**< The directfb window handle */ + IDirectFBSurface *surface; /**< The directfb client surface */ + } dfb; +#endif +#if defined(SDL_VIDEO_DRIVER_COCOA) + struct + { + NSWindow *window; /* The Cocoa window */ + } cocoa; +#endif +#if defined(SDL_VIDEO_DRIVER_UIKIT) + struct + { + UIWindow *window; /* The UIKit window */ + } uikit; +#endif + /* Can't have an empty union */ + int dummy; + } info; +}; + +#endif /* SDL_PROTOTYPES_ONLY */ + +typedef struct SDL_SysWMinfo SDL_SysWMinfo; + +/* Function prototypes */ +/** + * \brief This function allows access to driver-dependent window information. + * + * \param window The window about which information is being requested + * \param info This structure must be initialized with the SDL version, and is + * then filled in with information about the given window. + * + * \return SDL_TRUE if the function is implemented and the version member of + * the \c info struct is valid, SDL_FALSE otherwise. + * + * You typically use this function like this: + * \code + * SDL_SysWMinfo info; + * SDL_VERSION(&info.version); + * if ( SDL_GetWindowWMInfo(window, &info) ) { ... } + * \endcode + */ +extern DECLSPEC SDL_bool SDLCALL SDL_GetWindowWMInfo(SDL_Window * window, + SDL_SysWMinfo * info); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_syswm_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_thread.h b/src/SDL2/SDL_thread.h new file mode 100644 index 000000000..c878c3ab9 --- /dev/null +++ b/src/SDL2/SDL_thread.h @@ -0,0 +1,240 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef _SDL_thread_h +#define _SDL_thread_h + +/** + * \file SDL_thread.h + * + * Header for the SDL thread management routines. + */ + +#include "SDL_stdinc.h" +#include "SDL_error.h" + +/* Thread synchronization primitives */ +#include "SDL_atomic.h" +#include "SDL_mutex.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* The SDL thread structure, defined in SDL_thread.c */ +struct SDL_Thread; +typedef struct SDL_Thread SDL_Thread; + +/* The SDL thread ID */ +typedef unsigned long SDL_threadID; + +/* Thread local storage ID, 0 is the invalid ID */ +typedef unsigned int SDL_TLSID; + +/* The SDL thread priority + * + * Note: On many systems you require special privileges to set high priority. + */ +typedef enum { + SDL_THREAD_PRIORITY_LOW, + SDL_THREAD_PRIORITY_NORMAL, + SDL_THREAD_PRIORITY_HIGH +} SDL_ThreadPriority; + +/* The function passed to SDL_CreateThread() + It is passed a void* user context parameter and returns an int. + */ +typedef int (SDLCALL * SDL_ThreadFunction) (void *data); + +#if defined(__WIN32__) && !defined(HAVE_LIBC) +/** + * \file SDL_thread.h + * + * We compile SDL into a DLL. This means, that it's the DLL which + * creates a new thread for the calling process with the SDL_CreateThread() + * API. There is a problem with this, that only the RTL of the SDL.DLL will + * be initialized for those threads, and not the RTL of the calling + * application! + * + * To solve this, we make a little hack here. + * + * We'll always use the caller's _beginthread() and _endthread() APIs to + * start a new thread. This way, if it's the SDL.DLL which uses this API, + * then the RTL of SDL.DLL will be used to create the new thread, and if it's + * the application, then the RTL of the application will be used. + * + * So, in short: + * Always use the _beginthread() and _endthread() of the calling runtime + * library! + */ +#define SDL_PASSED_BEGINTHREAD_ENDTHREAD +#include /* This has _beginthread() and _endthread() defined! */ + +typedef uintptr_t(__cdecl * pfnSDL_CurrentBeginThread) (void *, unsigned, + unsigned (__stdcall * + func) (void + *), + void *arg, unsigned, + unsigned *threadID); +typedef void (__cdecl * pfnSDL_CurrentEndThread) (unsigned code); + +/** + * Create a thread. + */ +extern DECLSPEC SDL_Thread *SDLCALL +SDL_CreateThread(SDL_ThreadFunction fn, const char *name, void *data, + pfnSDL_CurrentBeginThread pfnBeginThread, + pfnSDL_CurrentEndThread pfnEndThread); + +/** + * Create a thread. + */ +#define SDL_CreateThread(fn, name, data) SDL_CreateThread(fn, name, data, (pfnSDL_CurrentBeginThread)_beginthreadex, (pfnSDL_CurrentEndThread)_endthreadex) + +#else + +/** + * Create a thread. + * + * Thread naming is a little complicated: Most systems have very small + * limits for the string length (BeOS has 32 bytes, Linux currently has 16, + * Visual C++ 6.0 has nine!), and possibly other arbitrary rules. You'll + * have to see what happens with your system's debugger. The name should be + * UTF-8 (but using the naming limits of C identifiers is a better bet). + * There are no requirements for thread naming conventions, so long as the + * string is null-terminated UTF-8, but these guidelines are helpful in + * choosing a name: + * + * http://stackoverflow.com/questions/149932/naming-conventions-for-threads + * + * If a system imposes requirements, SDL will try to munge the string for + * it (truncate, etc), but the original string contents will be available + * from SDL_GetThreadName(). + */ +extern DECLSPEC SDL_Thread *SDLCALL +SDL_CreateThread(SDL_ThreadFunction fn, const char *name, void *data); + +#endif + +/** + * Get the thread name, as it was specified in SDL_CreateThread(). + * This function returns a pointer to a UTF-8 string that names the + * specified thread, or NULL if it doesn't have a name. This is internal + * memory, not to be free()'d by the caller, and remains valid until the + * specified thread is cleaned up by SDL_WaitThread(). + */ +extern DECLSPEC const char *SDLCALL SDL_GetThreadName(SDL_Thread *thread); + +/** + * Get the thread identifier for the current thread. + */ +extern DECLSPEC SDL_threadID SDLCALL SDL_ThreadID(void); + +/** + * Get the thread identifier for the specified thread. + * + * Equivalent to SDL_ThreadID() if the specified thread is NULL. + */ +extern DECLSPEC SDL_threadID SDLCALL SDL_GetThreadID(SDL_Thread * thread); + +/** + * Set the priority for the current thread + */ +extern DECLSPEC int SDLCALL SDL_SetThreadPriority(SDL_ThreadPriority priority); + +/** + * Wait for a thread to finish. + * + * The return code for the thread function is placed in the area + * pointed to by \c status, if \c status is not NULL. + */ +extern DECLSPEC void SDLCALL SDL_WaitThread(SDL_Thread * thread, int *status); + +/** + * \brief Create an identifier that is globally visible to all threads but refers to data that is thread-specific. + * + * \return The newly created thread local storage identifier, or 0 on error + * + * \code + * static SDL_SpinLock tls_lock; + * static SDL_TLSID thread_local_storage; + * + * void SetMyThreadData(void *value) + * { + * if (!thread_local_storage) { + * SDL_AtomicLock(&tls_lock); + * if (!thread_local_storage) { + * thread_local_storage = SDL_TLSCreate(); + * } + * SDL_AtomicUnLock(&tls_lock); + * } + * SDL_TLSSet(thread_local_storage, value); + * } + * + * void *GetMyThreadData(void) + * { + * return SDL_TLSGet(thread_local_storage); + * } + * \endcode + * + * \sa SDL_TLSGet() + * \sa SDL_TLSSet() + */ +extern DECLSPEC SDL_TLSID SDLCALL SDL_TLSCreate(void); + +/** + * \brief Get the value associated with a thread local storage ID for the current thread. + * + * \param id The thread local storage ID + * + * \return The value associated with the ID for the current thread, or NULL if no value has been set. + * + * \sa SDL_TLSCreate() + * \sa SDL_TLSSet() + */ +extern DECLSPEC void * SDLCALL SDL_TLSGet(SDL_TLSID id); + +/** + * \brief Set the value associated with a thread local storage ID for the current thread. + * + * \param id The thread local storage ID + * \param value The value to associate with the ID for the current thread + * \param destructor A function called when the thread exits, to free the value. + * + * \return 0 on success, -1 on error + * + * \sa SDL_TLSCreate() + * \sa SDL_TLSGet() + */ +extern DECLSPEC int SDLCALL SDL_TLSSet(SDL_TLSID id, const void *value, void (*destructor)(void*)); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_thread_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_timer.h b/src/SDL2/SDL_timer.h new file mode 100644 index 000000000..e065cf4f9 --- /dev/null +++ b/src/SDL2/SDL_timer.h @@ -0,0 +1,104 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef _SDL_timer_h +#define _SDL_timer_h + +/** + * \file SDL_timer.h + * + * Header for the SDL time management routines. + */ + +#include "SDL_stdinc.h" +#include "SDL_error.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Get the number of milliseconds since the SDL library initialization. + * + * \note This value wraps if the program runs for more than ~49 days. + */ +extern DECLSPEC Uint32 SDLCALL SDL_GetTicks(void); + +/** + * \brief Get the current value of the high resolution counter + */ +extern DECLSPEC Uint64 SDLCALL SDL_GetPerformanceCounter(void); + +/** + * \brief Get the count per second of the high resolution counter + */ +extern DECLSPEC Uint64 SDLCALL SDL_GetPerformanceFrequency(void); + +/** + * \brief Wait a specified number of milliseconds before returning. + */ +extern DECLSPEC void SDLCALL SDL_Delay(Uint32 ms); + +/** + * Function prototype for the timer callback function. + * + * The callback function is passed the current timer interval and returns + * the next timer interval. If the returned value is the same as the one + * passed in, the periodic alarm continues, otherwise a new alarm is + * scheduled. If the callback returns 0, the periodic alarm is cancelled. + */ +typedef Uint32 (SDLCALL * SDL_TimerCallback) (Uint32 interval, void *param); + +/** + * Definition of the timer ID type. + */ +typedef int SDL_TimerID; + +/** + * \brief Add a new timer to the pool of timers already running. + * + * \return A timer ID, or NULL when an error occurs. + */ +extern DECLSPEC SDL_TimerID SDLCALL SDL_AddTimer(Uint32 interval, + SDL_TimerCallback callback, + void *param); + +/** + * \brief Remove a timer knowing its ID. + * + * \return A boolean value indicating success or failure. + * + * \warning It is not safe to remove a timer multiple times. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_RemoveTimer(SDL_TimerID id); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_timer_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_touch.h b/src/SDL2/SDL_touch.h new file mode 100644 index 000000000..9e6d7c65f --- /dev/null +++ b/src/SDL2/SDL_touch.h @@ -0,0 +1,86 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_touch.h + * + * Include file for SDL touch event handling. + */ + +#ifndef _SDL_touch_h +#define _SDL_touch_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_video.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +typedef Sint64 SDL_TouchID; +typedef Sint64 SDL_FingerID; + +typedef struct SDL_Finger +{ + SDL_FingerID id; + float x; + float y; + float pressure; +} SDL_Finger; + +/* Used as the device ID for mouse events simulated with touch input */ +#define SDL_TOUCH_MOUSEID ((Uint32)-1) + + +/* Function prototypes */ + +/** + * \brief Get the number of registered touch devices. + */ +extern DECLSPEC int SDLCALL SDL_GetNumTouchDevices(void); + +/** + * \brief Get the touch ID with the given index, or 0 if the index is invalid. + */ +extern DECLSPEC SDL_TouchID SDLCALL SDL_GetTouchDevice(int index); + +/** + * \brief Get the number of active fingers for a given touch device. + */ +extern DECLSPEC int SDLCALL SDL_GetNumTouchFingers(SDL_TouchID touchID); + +/** + * \brief Get the finger object of the given touch, with the given index. + */ +extern DECLSPEC SDL_Finger * SDLCALL SDL_GetTouchFinger(SDL_TouchID touchID, int index); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_touch_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_types.h b/src/SDL2/SDL_types.h new file mode 100644 index 000000000..bb485cdb0 --- /dev/null +++ b/src/SDL2/SDL_types.h @@ -0,0 +1,29 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_types.h + * + * \deprecated + */ + +/* DEPRECATED */ +#include "SDL_stdinc.h" diff --git a/src/SDL2/SDL_version.h b/src/SDL2/SDL_version.h new file mode 100644 index 000000000..a9ced804d --- /dev/null +++ b/src/SDL2/SDL_version.h @@ -0,0 +1,162 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_version.h + * + * This header defines the current SDL version. + */ + +#ifndef _SDL_version_h +#define _SDL_version_h + +#include "SDL_stdinc.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Information the version of SDL in use. + * + * Represents the library's version as three levels: major revision + * (increments with massive changes, additions, and enhancements), + * minor revision (increments with backwards-compatible changes to the + * major revision), and patchlevel (increments with fixes to the minor + * revision). + * + * \sa SDL_VERSION + * \sa SDL_GetVersion + */ +typedef struct SDL_version +{ + Uint8 major; /**< major version */ + Uint8 minor; /**< minor version */ + Uint8 patch; /**< update version */ +} SDL_version; + +/* Printable format: "%d.%d.%d", MAJOR, MINOR, PATCHLEVEL +*/ +#define SDL_MAJOR_VERSION 2 +#define SDL_MINOR_VERSION 0 +#define SDL_PATCHLEVEL 0 + +/** + * \brief Macro to determine SDL version program was compiled against. + * + * This macro fills in a SDL_version structure with the version of the + * library you compiled against. This is determined by what header the + * compiler uses. Note that if you dynamically linked the library, you might + * have a slightly newer or older version at runtime. That version can be + * determined with SDL_GetVersion(), which, unlike SDL_VERSION(), + * is not a macro. + * + * \param x A pointer to a SDL_version struct to initialize. + * + * \sa SDL_version + * \sa SDL_GetVersion + */ +#define SDL_VERSION(x) \ +{ \ + (x)->major = SDL_MAJOR_VERSION; \ + (x)->minor = SDL_MINOR_VERSION; \ + (x)->patch = SDL_PATCHLEVEL; \ +} + +/** + * This macro turns the version numbers into a numeric value: + * \verbatim + (1,2,3) -> (1203) + \endverbatim + * + * This assumes that there will never be more than 100 patchlevels. + */ +#define SDL_VERSIONNUM(X, Y, Z) \ + ((X)*1000 + (Y)*100 + (Z)) + +/** + * This is the version number macro for the current SDL version. + */ +#define SDL_COMPILEDVERSION \ + SDL_VERSIONNUM(SDL_MAJOR_VERSION, SDL_MINOR_VERSION, SDL_PATCHLEVEL) + +/** + * This macro will evaluate to true if compiled with SDL at least X.Y.Z. + */ +#define SDL_VERSION_ATLEAST(X, Y, Z) \ + (SDL_COMPILEDVERSION >= SDL_VERSIONNUM(X, Y, Z)) + +/** + * \brief Get the version of SDL that is linked against your program. + * + * If you are linking to SDL dynamically, then it is possible that the + * current version will be different than the version you compiled against. + * This function returns the current version, while SDL_VERSION() is a + * macro that tells you what version you compiled with. + * + * \code + * SDL_version compiled; + * SDL_version linked; + * + * SDL_VERSION(&compiled); + * SDL_GetVersion(&linked); + * printf("We compiled against SDL version %d.%d.%d ...\n", + * compiled.major, compiled.minor, compiled.patch); + * printf("But we linked against SDL version %d.%d.%d.\n", + * linked.major, linked.minor, linked.patch); + * \endcode + * + * This function may be called safely at any time, even before SDL_Init(). + * + * \sa SDL_VERSION + */ +extern DECLSPEC void SDLCALL SDL_GetVersion(SDL_version * ver); + +/** + * \brief Get the code revision of SDL that is linked against your program. + * + * Returns an arbitrary string (a hash value) uniquely identifying the + * exact revision of the SDL library in use, and is only useful in comparing + * against other revisions. It is NOT an incrementing number. + */ +extern DECLSPEC const char *SDLCALL SDL_GetRevision(void); + +/** + * \brief Get the revision number of SDL that is linked against your program. + * + * Returns a number uniquely identifying the exact revision of the SDL + * library in use. It is an incrementing number based on commits to + * hg.libsdl.org. + */ +extern DECLSPEC int SDLCALL SDL_GetRevisionNumber(void); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_version_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/SDL_video.h b/src/SDL2/SDL_video.h new file mode 100644 index 000000000..f3a961977 --- /dev/null +++ b/src/SDL2/SDL_video.h @@ -0,0 +1,953 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_video.h + * + * Header file for SDL video functions. + */ + +#ifndef _SDL_video_h +#define _SDL_video_h + +#include "SDL_stdinc.h" +#include "SDL_pixels.h" +#include "SDL_rect.h" +#include "SDL_surface.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief The structure that defines a display mode + * + * \sa SDL_GetNumDisplayModes() + * \sa SDL_GetDisplayMode() + * \sa SDL_GetDesktopDisplayMode() + * \sa SDL_GetCurrentDisplayMode() + * \sa SDL_GetClosestDisplayMode() + * \sa SDL_SetWindowDisplayMode() + * \sa SDL_GetWindowDisplayMode() + */ +typedef struct +{ + Uint32 format; /**< pixel format */ + int w; /**< width */ + int h; /**< height */ + int refresh_rate; /**< refresh rate (or zero for unspecified) */ + void *driverdata; /**< driver-specific data, initialize to 0 */ +} SDL_DisplayMode; + +/** + * \brief The type used to identify a window + * + * \sa SDL_CreateWindow() + * \sa SDL_CreateWindowFrom() + * \sa SDL_DestroyWindow() + * \sa SDL_GetWindowData() + * \sa SDL_GetWindowFlags() + * \sa SDL_GetWindowGrab() + * \sa SDL_GetWindowPosition() + * \sa SDL_GetWindowSize() + * \sa SDL_GetWindowTitle() + * \sa SDL_HideWindow() + * \sa SDL_MaximizeWindow() + * \sa SDL_MinimizeWindow() + * \sa SDL_RaiseWindow() + * \sa SDL_RestoreWindow() + * \sa SDL_SetWindowData() + * \sa SDL_SetWindowFullscreen() + * \sa SDL_SetWindowGrab() + * \sa SDL_SetWindowIcon() + * \sa SDL_SetWindowPosition() + * \sa SDL_SetWindowSize() + * \sa SDL_SetWindowBordered() + * \sa SDL_SetWindowTitle() + * \sa SDL_ShowWindow() + */ +typedef struct SDL_Window SDL_Window; + +/** + * \brief The flags on a window + * + * \sa SDL_GetWindowFlags() + */ +typedef enum +{ + SDL_WINDOW_FULLSCREEN = 0x00000001, /**< fullscreen window */ + SDL_WINDOW_OPENGL = 0x00000002, /**< window usable with OpenGL context */ + SDL_WINDOW_SHOWN = 0x00000004, /**< window is visible */ + SDL_WINDOW_HIDDEN = 0x00000008, /**< window is not visible */ + SDL_WINDOW_BORDERLESS = 0x00000010, /**< no window decoration */ + SDL_WINDOW_RESIZABLE = 0x00000020, /**< window can be resized */ + SDL_WINDOW_MINIMIZED = 0x00000040, /**< window is minimized */ + SDL_WINDOW_MAXIMIZED = 0x00000080, /**< window is maximized */ + SDL_WINDOW_INPUT_GRABBED = 0x00000100, /**< window has grabbed input focus */ + SDL_WINDOW_INPUT_FOCUS = 0x00000200, /**< window has input focus */ + SDL_WINDOW_MOUSE_FOCUS = 0x00000400, /**< window has mouse focus */ + SDL_WINDOW_FULLSCREEN_DESKTOP = ( SDL_WINDOW_FULLSCREEN | 0x00001000 ), + SDL_WINDOW_FOREIGN = 0x00000800 /**< window not created by SDL */ +} SDL_WindowFlags; + +/** + * \brief Used to indicate that you don't care what the window position is. + */ +#define SDL_WINDOWPOS_UNDEFINED_MASK 0x1FFF0000 +#define SDL_WINDOWPOS_UNDEFINED_DISPLAY(X) (SDL_WINDOWPOS_UNDEFINED_MASK|(X)) +#define SDL_WINDOWPOS_UNDEFINED SDL_WINDOWPOS_UNDEFINED_DISPLAY(0) +#define SDL_WINDOWPOS_ISUNDEFINED(X) \ + (((X)&0xFFFF0000) == SDL_WINDOWPOS_UNDEFINED_MASK) + +/** + * \brief Used to indicate that the window position should be centered. + */ +#define SDL_WINDOWPOS_CENTERED_MASK 0x2FFF0000 +#define SDL_WINDOWPOS_CENTERED_DISPLAY(X) (SDL_WINDOWPOS_CENTERED_MASK|(X)) +#define SDL_WINDOWPOS_CENTERED SDL_WINDOWPOS_CENTERED_DISPLAY(0) +#define SDL_WINDOWPOS_ISCENTERED(X) \ + (((X)&0xFFFF0000) == SDL_WINDOWPOS_CENTERED_MASK) + +/** + * \brief Event subtype for window events + */ +typedef enum +{ + SDL_WINDOWEVENT_NONE, /**< Never used */ + SDL_WINDOWEVENT_SHOWN, /**< Window has been shown */ + SDL_WINDOWEVENT_HIDDEN, /**< Window has been hidden */ + SDL_WINDOWEVENT_EXPOSED, /**< Window has been exposed and should be + redrawn */ + SDL_WINDOWEVENT_MOVED, /**< Window has been moved to data1, data2 + */ + SDL_WINDOWEVENT_RESIZED, /**< Window has been resized to data1xdata2 */ + SDL_WINDOWEVENT_SIZE_CHANGED, /**< The window size has changed, either as a result of an API call or through the system or user changing the window size. */ + SDL_WINDOWEVENT_MINIMIZED, /**< Window has been minimized */ + SDL_WINDOWEVENT_MAXIMIZED, /**< Window has been maximized */ + SDL_WINDOWEVENT_RESTORED, /**< Window has been restored to normal size + and position */ + SDL_WINDOWEVENT_ENTER, /**< Window has gained mouse focus */ + SDL_WINDOWEVENT_LEAVE, /**< Window has lost mouse focus */ + SDL_WINDOWEVENT_FOCUS_GAINED, /**< Window has gained keyboard focus */ + SDL_WINDOWEVENT_FOCUS_LOST, /**< Window has lost keyboard focus */ + SDL_WINDOWEVENT_CLOSE /**< The window manager requests that the + window be closed */ +} SDL_WindowEventID; + +/** + * \brief An opaque handle to an OpenGL context. + */ +typedef void *SDL_GLContext; + +/** + * \brief OpenGL configuration attributes + */ +typedef enum +{ + SDL_GL_RED_SIZE, + SDL_GL_GREEN_SIZE, + SDL_GL_BLUE_SIZE, + SDL_GL_ALPHA_SIZE, + SDL_GL_BUFFER_SIZE, + SDL_GL_DOUBLEBUFFER, + SDL_GL_DEPTH_SIZE, + SDL_GL_STENCIL_SIZE, + SDL_GL_ACCUM_RED_SIZE, + SDL_GL_ACCUM_GREEN_SIZE, + SDL_GL_ACCUM_BLUE_SIZE, + SDL_GL_ACCUM_ALPHA_SIZE, + SDL_GL_STEREO, + SDL_GL_MULTISAMPLEBUFFERS, + SDL_GL_MULTISAMPLESAMPLES, + SDL_GL_ACCELERATED_VISUAL, + SDL_GL_RETAINED_BACKING, + SDL_GL_CONTEXT_MAJOR_VERSION, + SDL_GL_CONTEXT_MINOR_VERSION, + SDL_GL_CONTEXT_EGL, + SDL_GL_CONTEXT_FLAGS, + SDL_GL_CONTEXT_PROFILE_MASK, + SDL_GL_SHARE_WITH_CURRENT_CONTEXT +} SDL_GLattr; + +typedef enum +{ + SDL_GL_CONTEXT_PROFILE_CORE = 0x0001, + SDL_GL_CONTEXT_PROFILE_COMPATIBILITY = 0x0002, + SDL_GL_CONTEXT_PROFILE_ES = 0x0004 +} SDL_GLprofile; + +typedef enum +{ + SDL_GL_CONTEXT_DEBUG_FLAG = 0x0001, + SDL_GL_CONTEXT_FORWARD_COMPATIBLE_FLAG = 0x0002, + SDL_GL_CONTEXT_ROBUST_ACCESS_FLAG = 0x0004, + SDL_GL_CONTEXT_RESET_ISOLATION_FLAG = 0x0008 +} SDL_GLcontextFlag; + + +/* Function prototypes */ + +/** + * \brief Get the number of video drivers compiled into SDL + * + * \sa SDL_GetVideoDriver() + */ +extern DECLSPEC int SDLCALL SDL_GetNumVideoDrivers(void); + +/** + * \brief Get the name of a built in video driver. + * + * \note The video drivers are presented in the order in which they are + * normally checked during initialization. + * + * \sa SDL_GetNumVideoDrivers() + */ +extern DECLSPEC const char *SDLCALL SDL_GetVideoDriver(int index); + +/** + * \brief Initialize the video subsystem, optionally specifying a video driver. + * + * \param driver_name Initialize a specific driver by name, or NULL for the + * default video driver. + * + * \return 0 on success, -1 on error + * + * This function initializes the video subsystem; setting up a connection + * to the window manager, etc, and determines the available display modes + * and pixel formats, but does not initialize a window or graphics mode. + * + * \sa SDL_VideoQuit() + */ +extern DECLSPEC int SDLCALL SDL_VideoInit(const char *driver_name); + +/** + * \brief Shuts down the video subsystem. + * + * This function closes all windows, and restores the original video mode. + * + * \sa SDL_VideoInit() + */ +extern DECLSPEC void SDLCALL SDL_VideoQuit(void); + +/** + * \brief Returns the name of the currently initialized video driver. + * + * \return The name of the current video driver or NULL if no driver + * has been initialized + * + * \sa SDL_GetNumVideoDrivers() + * \sa SDL_GetVideoDriver() + */ +extern DECLSPEC const char *SDLCALL SDL_GetCurrentVideoDriver(void); + +/** + * \brief Returns the number of available video displays. + * + * \sa SDL_GetDisplayBounds() + */ +extern DECLSPEC int SDLCALL SDL_GetNumVideoDisplays(void); + +/** + * \brief Get the name of a display in UTF-8 encoding + * + * \return The name of a display, or NULL for an invalid display index. + * + * \sa SDL_GetNumVideoDisplays() + */ +extern DECLSPEC const char * SDLCALL SDL_GetDisplayName(int displayIndex); + +/** + * \brief Get the desktop area represented by a display, with the primary + * display located at 0,0 + * + * \return 0 on success, or -1 if the index is out of range. + * + * \sa SDL_GetNumVideoDisplays() + */ +extern DECLSPEC int SDLCALL SDL_GetDisplayBounds(int displayIndex, SDL_Rect * rect); + +/** + * \brief Returns the number of available display modes. + * + * \sa SDL_GetDisplayMode() + */ +extern DECLSPEC int SDLCALL SDL_GetNumDisplayModes(int displayIndex); + +/** + * \brief Fill in information about a specific display mode. + * + * \note The display modes are sorted in this priority: + * \li bits per pixel -> more colors to fewer colors + * \li width -> largest to smallest + * \li height -> largest to smallest + * \li refresh rate -> highest to lowest + * + * \sa SDL_GetNumDisplayModes() + */ +extern DECLSPEC int SDLCALL SDL_GetDisplayMode(int displayIndex, int modeIndex, + SDL_DisplayMode * mode); + +/** + * \brief Fill in information about the desktop display mode. + */ +extern DECLSPEC int SDLCALL SDL_GetDesktopDisplayMode(int displayIndex, SDL_DisplayMode * mode); + +/** + * \brief Fill in information about the current display mode. + */ +extern DECLSPEC int SDLCALL SDL_GetCurrentDisplayMode(int displayIndex, SDL_DisplayMode * mode); + + +/** + * \brief Get the closest match to the requested display mode. + * + * \param displayIndex The index of display from which mode should be queried. + * \param mode The desired display mode + * \param closest A pointer to a display mode to be filled in with the closest + * match of the available display modes. + * + * \return The passed in value \c closest, or NULL if no matching video mode + * was available. + * + * The available display modes are scanned, and \c closest is filled in with the + * closest mode matching the requested mode and returned. The mode format and + * refresh_rate default to the desktop mode if they are 0. The modes are + * scanned with size being first priority, format being second priority, and + * finally checking the refresh_rate. If all the available modes are too + * small, then NULL is returned. + * + * \sa SDL_GetNumDisplayModes() + * \sa SDL_GetDisplayMode() + */ +extern DECLSPEC SDL_DisplayMode * SDLCALL SDL_GetClosestDisplayMode(int displayIndex, const SDL_DisplayMode * mode, SDL_DisplayMode * closest); + +/** + * \brief Get the display index associated with a window. + * + * \return the display index of the display containing the center of the + * window, or -1 on error. + */ +extern DECLSPEC int SDLCALL SDL_GetWindowDisplayIndex(SDL_Window * window); + +/** + * \brief Set the display mode used when a fullscreen window is visible. + * + * By default the window's dimensions and the desktop format and refresh rate + * are used. + * + * \param window The window for which the display mode should be set. + * \param mode The mode to use, or NULL for the default mode. + * + * \return 0 on success, or -1 if setting the display mode failed. + * + * \sa SDL_GetWindowDisplayMode() + * \sa SDL_SetWindowFullscreen() + */ +extern DECLSPEC int SDLCALL SDL_SetWindowDisplayMode(SDL_Window * window, + const SDL_DisplayMode + * mode); + +/** + * \brief Fill in information about the display mode used when a fullscreen + * window is visible. + * + * \sa SDL_SetWindowDisplayMode() + * \sa SDL_SetWindowFullscreen() + */ +extern DECLSPEC int SDLCALL SDL_GetWindowDisplayMode(SDL_Window * window, + SDL_DisplayMode * mode); + +/** + * \brief Get the pixel format associated with the window. + */ +extern DECLSPEC Uint32 SDLCALL SDL_GetWindowPixelFormat(SDL_Window * window); + +/** + * \brief Create a window with the specified position, dimensions, and flags. + * + * \param title The title of the window, in UTF-8 encoding. + * \param x The x position of the window, ::SDL_WINDOWPOS_CENTERED, or + * ::SDL_WINDOWPOS_UNDEFINED. + * \param y The y position of the window, ::SDL_WINDOWPOS_CENTERED, or + * ::SDL_WINDOWPOS_UNDEFINED. + * \param w The width of the window. + * \param h The height of the window. + * \param flags The flags for the window, a mask of any of the following: + * ::SDL_WINDOW_FULLSCREEN, ::SDL_WINDOW_OPENGL, + * ::SDL_WINDOW_HIDDEN, ::SDL_WINDOW_BORDERLESS, + * ::SDL_WINDOW_RESIZABLE, ::SDL_WINDOW_MAXIMIZED, + * ::SDL_WINDOW_MINIMIZED, ::SDL_WINDOW_INPUT_GRABBED. + * + * \return The id of the window created, or zero if window creation failed. + * + * \sa SDL_DestroyWindow() + */ +extern DECLSPEC SDL_Window * SDLCALL SDL_CreateWindow(const char *title, + int x, int y, int w, + int h, Uint32 flags); + +/** + * \brief Create an SDL window from an existing native window. + * + * \param data A pointer to driver-dependent window creation data + * + * \return The id of the window created, or zero if window creation failed. + * + * \sa SDL_DestroyWindow() + */ +extern DECLSPEC SDL_Window * SDLCALL SDL_CreateWindowFrom(const void *data); + +/** + * \brief Get the numeric ID of a window, for logging purposes. + */ +extern DECLSPEC Uint32 SDLCALL SDL_GetWindowID(SDL_Window * window); + +/** + * \brief Get a window from a stored ID, or NULL if it doesn't exist. + */ +extern DECLSPEC SDL_Window * SDLCALL SDL_GetWindowFromID(Uint32 id); + +/** + * \brief Get the window flags. + */ +extern DECLSPEC Uint32 SDLCALL SDL_GetWindowFlags(SDL_Window * window); + +/** + * \brief Set the title of a window, in UTF-8 format. + * + * \sa SDL_GetWindowTitle() + */ +extern DECLSPEC void SDLCALL SDL_SetWindowTitle(SDL_Window * window, + const char *title); + +/** + * \brief Get the title of a window, in UTF-8 format. + * + * \sa SDL_SetWindowTitle() + */ +extern DECLSPEC const char *SDLCALL SDL_GetWindowTitle(SDL_Window * window); + +/** + * \brief Set the icon for a window. + * + * \param window The window for which the icon should be set. + * \param icon The icon for the window. + */ +extern DECLSPEC void SDLCALL SDL_SetWindowIcon(SDL_Window * window, + SDL_Surface * icon); + +/** + * \brief Associate an arbitrary named pointer with a window. + * + * \param window The window to associate with the pointer. + * \param name The name of the pointer. + * \param userdata The associated pointer. + * + * \return The previous value associated with 'name' + * + * \note The name is case-sensitive. + * + * \sa SDL_GetWindowData() + */ +extern DECLSPEC void* SDLCALL SDL_SetWindowData(SDL_Window * window, + const char *name, + void *userdata); + +/** + * \brief Retrieve the data pointer associated with a window. + * + * \param window The window to query. + * \param name The name of the pointer. + * + * \return The value associated with 'name' + * + * \sa SDL_SetWindowData() + */ +extern DECLSPEC void *SDLCALL SDL_GetWindowData(SDL_Window * window, + const char *name); + +/** + * \brief Set the position of a window. + * + * \param window The window to reposition. + * \param x The x coordinate of the window, ::SDL_WINDOWPOS_CENTERED, or + ::SDL_WINDOWPOS_UNDEFINED. + * \param y The y coordinate of the window, ::SDL_WINDOWPOS_CENTERED, or + ::SDL_WINDOWPOS_UNDEFINED. + * + * \note The window coordinate origin is the upper left of the display. + * + * \sa SDL_GetWindowPosition() + */ +extern DECLSPEC void SDLCALL SDL_SetWindowPosition(SDL_Window * window, + int x, int y); + +/** + * \brief Get the position of a window. + * + * \param window The window to query. + * \param x Pointer to variable for storing the x position, may be NULL + * \param y Pointer to variable for storing the y position, may be NULL + * + * \sa SDL_SetWindowPosition() + */ +extern DECLSPEC void SDLCALL SDL_GetWindowPosition(SDL_Window * window, + int *x, int *y); + +/** + * \brief Set the size of a window's client area. + * + * \param window The window to resize. + * \param w The width of the window, must be >0 + * \param h The height of the window, must be >0 + * + * \note You can't change the size of a fullscreen window, it automatically + * matches the size of the display mode. + * + * \sa SDL_GetWindowSize() + */ +extern DECLSPEC void SDLCALL SDL_SetWindowSize(SDL_Window * window, int w, + int h); + +/** + * \brief Get the size of a window's client area. + * + * \param window The window to query. + * \param w Pointer to variable for storing the width, may be NULL + * \param h Pointer to variable for storing the height, may be NULL + * + * \sa SDL_SetWindowSize() + */ +extern DECLSPEC void SDLCALL SDL_GetWindowSize(SDL_Window * window, int *w, + int *h); + +/** + * \brief Set the minimum size of a window's client area. + * + * \param window The window to set a new minimum size. + * \param min_w The minimum width of the window, must be >0 + * \param min_h The minimum height of the window, must be >0 + * + * \note You can't change the minimum size of a fullscreen window, it + * automatically matches the size of the display mode. + * + * \sa SDL_GetWindowMinimumSize() + * \sa SDL_SetWindowMaximumSize() + */ +extern DECLSPEC void SDLCALL SDL_SetWindowMinimumSize(SDL_Window * window, + int min_w, int min_h); + +/** + * \brief Get the minimum size of a window's client area. + * + * \param window The window to query. + * \param w Pointer to variable for storing the minimum width, may be NULL + * \param h Pointer to variable for storing the minimum height, may be NULL + * + * \sa SDL_GetWindowMaximumSize() + * \sa SDL_SetWindowMinimumSize() + */ +extern DECLSPEC void SDLCALL SDL_GetWindowMinimumSize(SDL_Window * window, + int *w, int *h); + +/** + * \brief Set the maximum size of a window's client area. + * + * \param window The window to set a new maximum size. + * \param max_w The maximum width of the window, must be >0 + * \param max_h The maximum height of the window, must be >0 + * + * \note You can't change the maximum size of a fullscreen window, it + * automatically matches the size of the display mode. + * + * \sa SDL_GetWindowMaximumSize() + * \sa SDL_SetWindowMinimumSize() + */ +extern DECLSPEC void SDLCALL SDL_SetWindowMaximumSize(SDL_Window * window, + int max_w, int max_h); + +/** + * \brief Get the maximum size of a window's client area. + * + * \param window The window to query. + * \param w Pointer to variable for storing the maximum width, may be NULL + * \param h Pointer to variable for storing the maximum height, may be NULL + * + * \sa SDL_GetWindowMinimumSize() + * \sa SDL_SetWindowMaximumSize() + */ +extern DECLSPEC void SDLCALL SDL_GetWindowMaximumSize(SDL_Window * window, + int *w, int *h); + +/** + * \brief Set the border state of a window. + * + * This will add or remove the window's SDL_WINDOW_BORDERLESS flag and + * add or remove the border from the actual window. This is a no-op if the + * window's border already matches the requested state. + * + * \param window The window of which to change the border state. + * \param bordered SDL_FALSE to remove border, SDL_TRUE to add border. + * + * \note You can't change the border state of a fullscreen window. + * + * \sa SDL_GetWindowFlags() + */ +extern DECLSPEC void SDLCALL SDL_SetWindowBordered(SDL_Window * window, + SDL_bool bordered); + +/** + * \brief Show a window. + * + * \sa SDL_HideWindow() + */ +extern DECLSPEC void SDLCALL SDL_ShowWindow(SDL_Window * window); + +/** + * \brief Hide a window. + * + * \sa SDL_ShowWindow() + */ +extern DECLSPEC void SDLCALL SDL_HideWindow(SDL_Window * window); + +/** + * \brief Raise a window above other windows and set the input focus. + */ +extern DECLSPEC void SDLCALL SDL_RaiseWindow(SDL_Window * window); + +/** + * \brief Make a window as large as possible. + * + * \sa SDL_RestoreWindow() + */ +extern DECLSPEC void SDLCALL SDL_MaximizeWindow(SDL_Window * window); + +/** + * \brief Minimize a window to an iconic representation. + * + * \sa SDL_RestoreWindow() + */ +extern DECLSPEC void SDLCALL SDL_MinimizeWindow(SDL_Window * window); + +/** + * \brief Restore the size and position of a minimized or maximized window. + * + * \sa SDL_MaximizeWindow() + * \sa SDL_MinimizeWindow() + */ +extern DECLSPEC void SDLCALL SDL_RestoreWindow(SDL_Window * window); + +/** + * \brief Set a window's fullscreen state. + * + * \return 0 on success, or -1 if setting the display mode failed. + * + * \sa SDL_SetWindowDisplayMode() + * \sa SDL_GetWindowDisplayMode() + */ +extern DECLSPEC int SDLCALL SDL_SetWindowFullscreen(SDL_Window * window, + Uint32 flags); + +/** + * \brief Get the SDL surface associated with the window. + * + * \return The window's framebuffer surface, or NULL on error. + * + * A new surface will be created with the optimal format for the window, + * if necessary. This surface will be freed when the window is destroyed. + * + * \note You may not combine this with 3D or the rendering API on this window. + * + * \sa SDL_UpdateWindowSurface() + * \sa SDL_UpdateWindowSurfaceRects() + */ +extern DECLSPEC SDL_Surface * SDLCALL SDL_GetWindowSurface(SDL_Window * window); + +/** + * \brief Copy the window surface to the screen. + * + * \return 0 on success, or -1 on error. + * + * \sa SDL_GetWindowSurface() + * \sa SDL_UpdateWindowSurfaceRects() + */ +extern DECLSPEC int SDLCALL SDL_UpdateWindowSurface(SDL_Window * window); + +/** + * \brief Copy a number of rectangles on the window surface to the screen. + * + * \return 0 on success, or -1 on error. + * + * \sa SDL_GetWindowSurface() + * \sa SDL_UpdateWindowSurfaceRect() + */ +extern DECLSPEC int SDLCALL SDL_UpdateWindowSurfaceRects(SDL_Window * window, + const SDL_Rect * rects, + int numrects); + +/** + * \brief Set a window's input grab mode. + * + * \param window The window for which the input grab mode should be set. + * \param grabbed This is SDL_TRUE to grab input, and SDL_FALSE to release input. + * + * \sa SDL_GetWindowGrab() + */ +extern DECLSPEC void SDLCALL SDL_SetWindowGrab(SDL_Window * window, + SDL_bool grabbed); + +/** + * \brief Get a window's input grab mode. + * + * \return This returns SDL_TRUE if input is grabbed, and SDL_FALSE otherwise. + * + * \sa SDL_SetWindowGrab() + */ +extern DECLSPEC SDL_bool SDLCALL SDL_GetWindowGrab(SDL_Window * window); + +/** + * \brief Set the brightness (gamma correction) for a window. + * + * \return 0 on success, or -1 if setting the brightness isn't supported. + * + * \sa SDL_GetWindowBrightness() + * \sa SDL_SetWindowGammaRamp() + */ +extern DECLSPEC int SDLCALL SDL_SetWindowBrightness(SDL_Window * window, float brightness); + +/** + * \brief Get the brightness (gamma correction) for a window. + * + * \return The last brightness value passed to SDL_SetWindowBrightness() + * + * \sa SDL_SetWindowBrightness() + */ +extern DECLSPEC float SDLCALL SDL_GetWindowBrightness(SDL_Window * window); + +/** + * \brief Set the gamma ramp for a window. + * + * \param window The window for which the gamma ramp should be set. + * \param red The translation table for the red channel, or NULL. + * \param green The translation table for the green channel, or NULL. + * \param blue The translation table for the blue channel, or NULL. + * + * \return 0 on success, or -1 if gamma ramps are unsupported. + * + * Set the gamma translation table for the red, green, and blue channels + * of the video hardware. Each table is an array of 256 16-bit quantities, + * representing a mapping between the input and output for that channel. + * The input is the index into the array, and the output is the 16-bit + * gamma value at that index, scaled to the output color precision. + * + * \sa SDL_GetWindowGammaRamp() + */ +extern DECLSPEC int SDLCALL SDL_SetWindowGammaRamp(SDL_Window * window, + const Uint16 * red, + const Uint16 * green, + const Uint16 * blue); + +/** + * \brief Get the gamma ramp for a window. + * + * \param window The window from which the gamma ramp should be queried. + * \param red A pointer to a 256 element array of 16-bit quantities to hold + * the translation table for the red channel, or NULL. + * \param green A pointer to a 256 element array of 16-bit quantities to hold + * the translation table for the green channel, or NULL. + * \param blue A pointer to a 256 element array of 16-bit quantities to hold + * the translation table for the blue channel, or NULL. + * + * \return 0 on success, or -1 if gamma ramps are unsupported. + * + * \sa SDL_SetWindowGammaRamp() + */ +extern DECLSPEC int SDLCALL SDL_GetWindowGammaRamp(SDL_Window * window, + Uint16 * red, + Uint16 * green, + Uint16 * blue); + +/** + * \brief Destroy a window. + */ +extern DECLSPEC void SDLCALL SDL_DestroyWindow(SDL_Window * window); + + +/** + * \brief Returns whether the screensaver is currently enabled (default on). + * + * \sa SDL_EnableScreenSaver() + * \sa SDL_DisableScreenSaver() + */ +extern DECLSPEC SDL_bool SDLCALL SDL_IsScreenSaverEnabled(void); + +/** + * \brief Allow the screen to be blanked by a screensaver + * + * \sa SDL_IsScreenSaverEnabled() + * \sa SDL_DisableScreenSaver() + */ +extern DECLSPEC void SDLCALL SDL_EnableScreenSaver(void); + +/** + * \brief Prevent the screen from being blanked by a screensaver + * + * \sa SDL_IsScreenSaverEnabled() + * \sa SDL_EnableScreenSaver() + */ +extern DECLSPEC void SDLCALL SDL_DisableScreenSaver(void); + + +/** + * \name OpenGL support functions + */ +/*@{*/ + +/** + * \brief Dynamically load an OpenGL library. + * + * \param path The platform dependent OpenGL library name, or NULL to open the + * default OpenGL library. + * + * \return 0 on success, or -1 if the library couldn't be loaded. + * + * This should be done after initializing the video driver, but before + * creating any OpenGL windows. If no OpenGL library is loaded, the default + * library will be loaded upon creation of the first OpenGL window. + * + * \note If you do this, you need to retrieve all of the GL functions used in + * your program from the dynamic library using SDL_GL_GetProcAddress(). + * + * \sa SDL_GL_GetProcAddress() + * \sa SDL_GL_UnloadLibrary() + */ +extern DECLSPEC int SDLCALL SDL_GL_LoadLibrary(const char *path); + +/** + * \brief Get the address of an OpenGL function. + */ +extern DECLSPEC void *SDLCALL SDL_GL_GetProcAddress(const char *proc); + +/** + * \brief Unload the OpenGL library previously loaded by SDL_GL_LoadLibrary(). + * + * \sa SDL_GL_LoadLibrary() + */ +extern DECLSPEC void SDLCALL SDL_GL_UnloadLibrary(void); + +/** + * \brief Return true if an OpenGL extension is supported for the current + * context. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_GL_ExtensionSupported(const char + *extension); + +/** + * \brief Set an OpenGL window attribute before window creation. + */ +extern DECLSPEC int SDLCALL SDL_GL_SetAttribute(SDL_GLattr attr, int value); + +/** + * \brief Get the actual value for an attribute from the current context. + */ +extern DECLSPEC int SDLCALL SDL_GL_GetAttribute(SDL_GLattr attr, int *value); + +/** + * \brief Create an OpenGL context for use with an OpenGL window, and make it + * current. + * + * \sa SDL_GL_DeleteContext() + */ +extern DECLSPEC SDL_GLContext SDLCALL SDL_GL_CreateContext(SDL_Window * + window); + +/** + * \brief Set up an OpenGL context for rendering into an OpenGL window. + * + * \note The context must have been created with a compatible window. + */ +extern DECLSPEC int SDLCALL SDL_GL_MakeCurrent(SDL_Window * window, + SDL_GLContext context); + +/** + * \brief Get the currently active OpenGL window. + */ +extern DECLSPEC SDL_Window* SDLCALL SDL_GL_GetCurrentWindow(void); + +/** + * \brief Get the currently active OpenGL context. + */ +extern DECLSPEC SDL_GLContext SDLCALL SDL_GL_GetCurrentContext(void); + +/** + * \brief Set the swap interval for the current OpenGL context. + * + * \param interval 0 for immediate updates, 1 for updates synchronized with the + * vertical retrace. If the system supports it, you may + * specify -1 to allow late swaps to happen immediately + * instead of waiting for the next retrace. + * + * \return 0 on success, or -1 if setting the swap interval is not supported. + * + * \sa SDL_GL_GetSwapInterval() + */ +extern DECLSPEC int SDLCALL SDL_GL_SetSwapInterval(int interval); + +/** + * \brief Get the swap interval for the current OpenGL context. + * + * \return 0 if there is no vertical retrace synchronization, 1 if the buffer + * swap is synchronized with the vertical retrace, and -1 if late + * swaps happen immediately instead of waiting for the next retrace. + * If the system can't determine the swap interval, or there isn't a + * valid current context, this will return 0 as a safe default. + * + * \sa SDL_GL_SetSwapInterval() + */ +extern DECLSPEC int SDLCALL SDL_GL_GetSwapInterval(void); + +/** + * \brief Swap the OpenGL buffers for a window, if double-buffering is + * supported. + */ +extern DECLSPEC void SDLCALL SDL_GL_SwapWindow(SDL_Window * window); + +/** + * \brief Delete an OpenGL context. + * + * \sa SDL_GL_CreateContext() + */ +extern DECLSPEC void SDLCALL SDL_GL_DeleteContext(SDL_GLContext context); + +/*@}*//*OpenGL support functions*/ + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_video_h */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/src/SDL2/VisualC/SDL_image_VS2008.sln b/src/SDL2/VisualC/SDL_image_VS2008.sln new file mode 100755 index 000000000..b24ad8066 --- /dev/null +++ b/src/SDL2/VisualC/SDL_image_VS2008.sln @@ -0,0 +1,39 @@ + +Microsoft Visual Studio Solution File, Format Version 10.00 +# Visual Studio 2008 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "SDL_image", "SDL_image_VS2008.vcproj", "{2BD5534E-00E2-4BEA-AC96-D9A92EA24696}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "showimage", "showimage\showimage_VS2008.vcproj", "{FEE80C5D-762E-4E57-9BCB-928749E8203F}" + ProjectSection(ProjectDependencies) = postProject + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696} = {2BD5534E-00E2-4BEA-AC96-D9A92EA24696} + EndProjectSection +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Win32.ActiveCfg = Debug|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Win32.Build.0 = Debug|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|x64.ActiveCfg = Debug|x64 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|x64.Build.0 = Debug|x64 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|Win32.ActiveCfg = Release|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|Win32.Build.0 = Release|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|x64.ActiveCfg = Release|x64 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|x64.Build.0 = Release|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|Win32.ActiveCfg = Debug|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|Win32.Build.0 = Debug|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|x64.ActiveCfg = Debug|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|x64.Build.0 = Debug|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|Win32.ActiveCfg = Release|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|Win32.Build.0 = Release|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|x64.ActiveCfg = Release|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|x64.Build.0 = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/SDL2/VisualC/SDL_image_VS2008.vcproj b/src/SDL2/VisualC/SDL_image_VS2008.vcproj new file mode 100755 index 000000000..ae0b455b2 --- /dev/null +++ b/src/SDL2/VisualC/SDL_image_VS2008.vcproj @@ -0,0 +1,983 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/VisualC/SDL_image_VS2010.sln b/src/SDL2/VisualC/SDL_image_VS2010.sln new file mode 100644 index 000000000..081b79320 --- /dev/null +++ b/src/SDL2/VisualC/SDL_image_VS2010.sln @@ -0,0 +1,36 @@ + +Microsoft Visual Studio Solution File, Format Version 11.00 +# Visual Studio 2010 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "SDL2_image", "SDL_image_VS2010.vcxproj", "{2BD5534E-00E2-4BEA-AC96-D9A92EA24696}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "showimage", "showimage\showimage_VS2010.vcxproj", "{FEE80C5D-762E-4E57-9BCB-928749E8203F}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Win32.ActiveCfg = Debug|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Win32.Build.0 = Debug|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|x64.ActiveCfg = Debug|x64 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|x64.Build.0 = Debug|x64 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|Win32.ActiveCfg = Release|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|Win32.Build.0 = Release|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|x64.ActiveCfg = Release|x64 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|x64.Build.0 = Release|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|Win32.ActiveCfg = Debug|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|Win32.Build.0 = Debug|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|x64.ActiveCfg = Debug|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|x64.Build.0 = Debug|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|Win32.ActiveCfg = Release|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|Win32.Build.0 = Release|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|x64.ActiveCfg = Release|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|x64.Build.0 = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/SDL2/VisualC/SDL_image_VS2010.vcxproj b/src/SDL2/VisualC/SDL_image_VS2010.vcxproj new file mode 100644 index 000000000..5adf296ba --- /dev/null +++ b/src/SDL2/VisualC/SDL_image_VS2010.vcxproj @@ -0,0 +1,398 @@ + + + + + Debug + Win32 + + + Debug + x64 + + + Release + Win32 + + + Release + x64 + + + + SDL2_image + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696} + SDL2_image + + + + DynamicLibrary + false + + + DynamicLibrary + false + + + DynamicLibrary + false + + + DynamicLibrary + false + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.40219.1 + .\Debug\ + .\Debug\ + true + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + true + .\Release\ + .\Release\ + false + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Win32 + .\Debug/SDL2_image.tlb + + + + + Disabled + ..\..\SDL\include;external\include;%(AdditionalIncludeDirectories) + _DEBUG;WIN32;_WINDOWS;LOAD_BMP;LOAD_GIF;LOAD_JPG;LOAD_JPG_DYNAMIC="libjpeg-9.dll";LOAD_LBM;LOAD_PCX;LOAD_PNG;LOAD_PNG_DYNAMIC="libpng16-16.dll";LOAD_PNM;LOAD_TGA;LOAD_TIF;LOAD_TIF_DYNAMIC="libtiff-5.dll";LOAD_WEBP;LOAD_WEBP_DYNAMIC="libwebp-4.dll";LOAD_XPM;LOAD_XV;PNG_USE_DLL;ZLIB_DLL;%(PreprocessorDefinitions) + true + MultiThreadedDLL + .\Debug/SDL2_image.pch + Level3 + true + EditAndContinue + + + _DEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + true + .\Debug/SDL2_image.pdb + Windows + MachineX86 + + + true + .\Debug/SDL2_image.bsc + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + X64 + .\Debug/SDL2_image.tlb + + + + + Disabled + ..\..\SDL\include;external\include;%(AdditionalIncludeDirectories) + _DEBUG;WIN32;_WINDOWS;LOAD_BMP;LOAD_GIF;LOAD_JPG;LOAD_JPG_DYNAMIC="libjpeg-9.dll";LOAD_LBM;LOAD_PCX;LOAD_PNG;LOAD_PNG_DYNAMIC="libpng16-16.dll";LOAD_PNM;LOAD_TGA;LOAD_TIF;LOAD_TIF_DYNAMIC="libtiff-5.dll";LOAD_WEBP;LOAD_WEBP_DYNAMIC="libwebp-4.dll";LOAD_XPM;LOAD_XV;PNG_USE_DLL;ZLIB_DLL;%(PreprocessorDefinitions) + true + MultiThreadedDLL + .\Debug/SDL2_image.pch + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + true + .\Debug/SDL2_image.pdb + Windows + MachineX64 + + + true + .\Debug/SDL2_image.bsc + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + .\Release/SDL2_image.tlb + + + + + MaxSpeed + OnlyExplicitInline + ..\..\SDL\include;external\include;%(AdditionalIncludeDirectories) + NDEBUG;WIN32;_WINDOWS;LOAD_BMP;LOAD_GIF;LOAD_JPG;LOAD_JPG_DYNAMIC="libjpeg-9.dll";LOAD_LBM;LOAD_PCX;LOAD_PNG;LOAD_PNG_DYNAMIC="libpng16-16.dll";LOAD_PNM;LOAD_TGA;LOAD_TIF;LOAD_TIF_DYNAMIC="libtiff-5.dll";LOAD_WEBP;LOAD_WEBP_DYNAMIC="libwebp-4.dll";LOAD_XPM;LOAD_XV;PNG_USE_DLL;ZLIB_DLL;%(PreprocessorDefinitions) + true + MultiThreadedDLL + true + .\Release/SDL2_image.pch + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + .\Release/SDL2_image.pdb + Windows + MachineX86 + + + true + .\Release/SDL2_image.bsc + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + .\Release/SDL2_image.tlb + + + + + MaxSpeed + OnlyExplicitInline + ..\..\SDL\include;external\include;%(AdditionalIncludeDirectories) + NDEBUG;WIN32;_WINDOWS;LOAD_BMP;LOAD_GIF;LOAD_JPG;LOAD_JPG_DYNAMIC="libjpeg-9.dll";LOAD_LBM;LOAD_PCX;LOAD_PNG;LOAD_PNG_DYNAMIC="libpng16-16.dll";LOAD_PNM;LOAD_TGA;LOAD_TIF;LOAD_TIF_DYNAMIC="libtiff-5.dll";LOAD_WEBP;LOAD_WEBP_DYNAMIC="libwebp-4.dll";LOAD_XPM;LOAD_XV;PNG_USE_DLL;ZLIB_DLL;%(PreprocessorDefinitions) + true + MultiThreadedDLL + true + .\Release/SDL2_image.pch + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + .\Release/SDL2_image.pdb + Windows + MachineX64 + + + true + .\Release/SDL2_image.bsc + + + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + + + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + + + + + + + + + + + + + diff --git a/src/SDL2/VisualC/SDL_image_VS2012.sln b/src/SDL2/VisualC/SDL_image_VS2012.sln new file mode 100644 index 000000000..e3c52fcb2 --- /dev/null +++ b/src/SDL2/VisualC/SDL_image_VS2012.sln @@ -0,0 +1,36 @@ + +Microsoft Visual Studio Solution File, Format Version 12.00 +# Visual Studio 2012 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "SDL2_image", "SDL_image_VS2012.vcxproj", "{2BD5534E-00E2-4BEA-AC96-D9A92EA24696}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "showimage", "showimage\showimage_VS2012.vcxproj", "{FEE80C5D-762E-4E57-9BCB-928749E8203F}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Win32.ActiveCfg = Debug|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Win32.Build.0 = Debug|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|x64.ActiveCfg = Debug|x64 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|x64.Build.0 = Debug|x64 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|Win32.ActiveCfg = Release|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|Win32.Build.0 = Release|Win32 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|x64.ActiveCfg = Release|x64 + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|x64.Build.0 = Release|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|Win32.ActiveCfg = Debug|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|Win32.Build.0 = Debug|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|x64.ActiveCfg = Debug|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|x64.Build.0 = Debug|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|Win32.ActiveCfg = Release|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|Win32.Build.0 = Release|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|x64.ActiveCfg = Release|x64 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|x64.Build.0 = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/SDL2/VisualC/SDL_image_VS2012.vcxproj b/src/SDL2/VisualC/SDL_image_VS2012.vcxproj new file mode 100644 index 000000000..f0bd876ea --- /dev/null +++ b/src/SDL2/VisualC/SDL_image_VS2012.vcxproj @@ -0,0 +1,394 @@ + + + + + Debug + Win32 + + + Debug + x64 + + + Release + Win32 + + + Release + x64 + + + + SDL2_image + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696} + SDL2_image + + + + DynamicLibrary + false + v110 + + + DynamicLibrary + false + v110 + + + DynamicLibrary + false + v110 + + + DynamicLibrary + false + v110 + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.40219.1 + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + true + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + true + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + false + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Win32 + .\Debug/SDL2_image.tlb + + + + + Disabled + ..\..\SDL\include;external\include;%(AdditionalIncludeDirectories) + _DEBUG;WIN32;_WINDOWS;LOAD_BMP;LOAD_GIF;LOAD_JPG;LOAD_JPG_DYNAMIC="libjpeg-9.dll";LOAD_LBM;LOAD_PCX;LOAD_PNG;LOAD_PNG_DYNAMIC="libpng16-16.dll";LOAD_PNM;LOAD_TGA;LOAD_TIF;LOAD_TIF_DYNAMIC="libtiff-5.dll";LOAD_WEBP;LOAD_WEBP_DYNAMIC="libwebp-4.dll";LOAD_XPM;LOAD_XV;PNG_USE_DLL;ZLIB_DLL;%(PreprocessorDefinitions) + true + MultiThreadedDLL + Level3 + true + EditAndContinue + + + _DEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + true + Windows + MachineX86 + + + true + .\Debug/SDL2_image.bsc + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + X64 + .\Debug/SDL2_image.tlb + + + + + Disabled + ..\..\SDL\include;external\include;%(AdditionalIncludeDirectories) + _DEBUG;WIN32;_WINDOWS;LOAD_BMP;LOAD_GIF;LOAD_JPG;LOAD_JPG_DYNAMIC="libjpeg-9.dll";LOAD_LBM;LOAD_PCX;LOAD_PNG;LOAD_PNG_DYNAMIC="libpng16-16.dll";LOAD_PNM;LOAD_TGA;LOAD_TIF;LOAD_TIF_DYNAMIC="libtiff-5.dll";LOAD_WEBP;LOAD_WEBP_DYNAMIC="libwebp-4.dll";LOAD_XPM;LOAD_XV;PNG_USE_DLL;ZLIB_DLL;%(PreprocessorDefinitions) + true + MultiThreadedDLL + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + true + Windows + MachineX64 + + + true + .\Debug/SDL2_image.bsc + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + .\Release/SDL2_image.tlb + + + + + MaxSpeed + OnlyExplicitInline + ..\..\SDL\include;external\include;%(AdditionalIncludeDirectories) + NDEBUG;WIN32;_WINDOWS;LOAD_BMP;LOAD_GIF;LOAD_JPG;LOAD_JPG_DYNAMIC="libjpeg-9.dll";LOAD_LBM;LOAD_PCX;LOAD_PNG;LOAD_PNG_DYNAMIC="libpng16-16.dll";LOAD_PNM;LOAD_TGA;LOAD_TIF;LOAD_TIF_DYNAMIC="libtiff-5.dll";LOAD_WEBP;LOAD_WEBP_DYNAMIC="libwebp-4.dll";LOAD_XPM;LOAD_XV;PNG_USE_DLL;ZLIB_DLL;%(PreprocessorDefinitions) + true + MultiThreadedDLL + true + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + Windows + MachineX86 + + + true + .\Release/SDL2_image.bsc + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + .\Release/SDL2_image.tlb + + + + + MaxSpeed + OnlyExplicitInline + ..\..\SDL\include;external\include;%(AdditionalIncludeDirectories) + NDEBUG;WIN32;_WINDOWS;LOAD_BMP;LOAD_GIF;LOAD_JPG;LOAD_JPG_DYNAMIC="libjpeg-9.dll";LOAD_LBM;LOAD_PCX;LOAD_PNG;LOAD_PNG_DYNAMIC="libpng16-16.dll";LOAD_PNM;LOAD_TGA;LOAD_TIF;LOAD_TIF_DYNAMIC="libtiff-5.dll";LOAD_WEBP;LOAD_WEBP_DYNAMIC="libwebp-4.dll";LOAD_XPM;LOAD_XV;PNG_USE_DLL;ZLIB_DLL;%(PreprocessorDefinitions) + true + MultiThreadedDLL + true + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + Windows + MachineX64 + + + true + .\Release/SDL2_image.bsc + + + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + %(PreprocessorDefinitions) + + + + + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + + + + + + + + + + + + + diff --git a/src/SDL2/VisualC/Version.rc b/src/SDL2/VisualC/Version.rc new file mode 100755 index 000000000..f96620822 --- /dev/null +++ b/src/SDL2/VisualC/Version.rc @@ -0,0 +1,105 @@ +//Microsoft Developer Studio generated resource script. +// +#include "resource.h" + +#define APSTUDIO_READONLY_SYMBOLS +///////////////////////////////////////////////////////////////////////////// +// +// Generated from the TEXTINCLUDE 2 resource. +// +#include "winresrc.h" + +///////////////////////////////////////////////////////////////////////////// +#undef APSTUDIO_READONLY_SYMBOLS + +///////////////////////////////////////////////////////////////////////////// +// English (U.S.) resources + +#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_ENU) +#ifdef _WIN32 +LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US +#pragma code_page(1252) +#endif //_WIN32 + +#ifndef _MAC +///////////////////////////////////////////////////////////////////////////// +// +// Version +// + +VS_VERSION_INFO VERSIONINFO + FILEVERSION 2,0,0,0 + PRODUCTVERSION 2,0,0,0 + FILEFLAGSMASK 0x3fL +#ifdef _DEBUG + FILEFLAGS 0x1L +#else + FILEFLAGS 0x0L +#endif + FILEOS 0x40004L + FILETYPE 0x2L + FILESUBTYPE 0x0L +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904b0" + BEGIN + VALUE "CompanyName", "\0" + VALUE "FileDescription", "SDL_image\0" + VALUE "FileVersion", "2, 0, 0, 0\0" + VALUE "InternalName", "SDL_image\0" + VALUE "LegalCopyright", "Copyright © 2013 Sam Lantinga\0" + VALUE "OriginalFilename", "SDL_image.dll\0" + VALUE "ProductName", "Simple DirectMedia Layer\0" + VALUE "ProductVersion", "2, 0, 0, 0\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x409, 1200 + END +END + +#endif // !_MAC + + +#ifdef APSTUDIO_INVOKED +///////////////////////////////////////////////////////////////////////////// +// +// TEXTINCLUDE +// + +1 TEXTINCLUDE DISCARDABLE +BEGIN + "resource.h\0" +END + +2 TEXTINCLUDE DISCARDABLE +BEGIN + "#include ""afxres.h""\r\n" + "\0" +END + +3 TEXTINCLUDE DISCARDABLE +BEGIN + "\r\n" + "\0" +END + +#endif // APSTUDIO_INVOKED + +#endif // English (U.S.) resources +///////////////////////////////////////////////////////////////////////////// + + + +#ifndef APSTUDIO_INVOKED +///////////////////////////////////////////////////////////////////////////// +// +// Generated from the TEXTINCLUDE 3 resource. +// + + +///////////////////////////////////////////////////////////////////////////// +#endif // not APSTUDIO_INVOKED + diff --git a/src/SDL2/VisualC/clean.sh b/src/SDL2/VisualC/clean.sh new file mode 100755 index 000000000..376506193 --- /dev/null +++ b/src/SDL2/VisualC/clean.sh @@ -0,0 +1,6 @@ +find . -depth -type d -name 'Debug' -exec rm -rv {} \; +find . -depth -type d -name 'Release' -exec rm -rv {} \; +find . -depth -type d -name 'x64' -empty -exec rmdir {} \; +find . -type f -name '*.user' -exec rm -v {} \; +find . -type f -name '*.ncb' -exec rm -v {} \; +find . -type f -name '*.suo' -exec rm -v {} \; diff --git a/src/SDL2/VisualC/external/include/jconfig.h b/src/SDL2/VisualC/external/include/jconfig.h new file mode 100755 index 000000000..966b1d514 --- /dev/null +++ b/src/SDL2/VisualC/external/include/jconfig.h @@ -0,0 +1,54 @@ +/* jconfig.h. Generated from jconfig.cfg by configure. */ +/* jconfig.cfg --- source file edited by configure script */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES 1 +#define HAVE_UNSIGNED_CHAR 1 +#define HAVE_UNSIGNED_SHORT 1 +/* #undef void */ +/* #undef const */ +/* #undef CHAR_IS_UNSIGNED */ +#define HAVE_STDDEF_H 1 +#define HAVE_STDLIB_H 1 +#define HAVE_LOCALE_H 1 +/* #undef NEED_BSD_STRINGS */ +/* #undef NEED_SYS_TYPES_H */ +/* #undef NEED_FAR_POINTERS */ +/* #undef NEED_SHORT_EXTERNAL_NAMES */ +/* Define this if you get warnings about undefined structures. */ +/* #undef INCOMPLETE_TYPES_BROKEN */ + +/* Define "boolean" as unsigned char, not int, on Windows systems. */ +#ifdef _WIN32 +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +#endif + +#ifdef JPEG_INTERNALS + +/* #undef RIGHT_SHIFT_IS_UNSIGNED */ +#define INLINE __inline__ +/* These are for configuring the JPEG memory manager. */ +/* #undef DEFAULT_MAX_MEM */ +/* #undef NO_MKTEMP */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +/* #undef RLE_SUPPORTED */ +#define TARGA_SUPPORTED /* Targa image file format */ + +/* #undef TWO_FILE_COMMANDLINE */ +/* #undef NEED_SIGNAL_CATCHER */ +/* #undef DONT_USE_B_MODE */ + +/* Define this if you want percent-done progress reports from cjpeg/djpeg. */ +/* #undef PROGRESS_REPORT */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/VisualC/external/include/jerror.h b/src/SDL2/VisualC/external/include/jerror.h new file mode 100755 index 000000000..a4b661f71 --- /dev/null +++ b/src/SDL2/VisualC/external/include/jerror.h @@ -0,0 +1,304 @@ +/* + * jerror.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 1997-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the error and message codes for the JPEG library. + * Edit this file to add new codes, or to translate the message strings to + * some other language. + * A set of error-reporting macros are defined too. Some applications using + * the JPEG library may wish to include this file to get the error codes + * and/or the macros. + */ + +/* + * To define the enum list of message codes, include this file without + * defining macro JMESSAGE. To create a message string table, include it + * again with a suitable JMESSAGE definition (see jerror.c for an example). + */ +#ifndef JMESSAGE +#ifndef JERROR_H +/* First time through, define the enum list */ +#define JMAKE_ENUM_LIST +#else +/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ +#define JMESSAGE(code,string) +#endif /* JERROR_H */ +#endif /* JMESSAGE */ + +#ifdef JMAKE_ENUM_LIST + +typedef enum { + +#define JMESSAGE(code,string) code , + +#endif /* JMAKE_ENUM_LIST */ + +JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ + +/* For maintenance convenience, list is alphabetical by message code name */ +JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") +JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") +JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") +JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") +JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request") +JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range") +JMESSAGE(JERR_BAD_DCTSIZE, "DCT scaled block size %dx%d not supported") +JMESSAGE(JERR_BAD_DROP_SAMPLING, + "Component index %d: mismatching sampling ratio %d:%d, %d:%d, %c") +JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition") +JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") +JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") +JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length") +JMESSAGE(JERR_BAD_LIB_VERSION, + "Wrong JPEG library version: library is %d, caller expects %d") +JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan") +JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d") +JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d") +JMESSAGE(JERR_BAD_PROGRESSION, + "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d") +JMESSAGE(JERR_BAD_PROG_SCRIPT, + "Invalid progressive parameters at scan script entry %d") +JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors") +JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d") +JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d") +JMESSAGE(JERR_BAD_STRUCT_SIZE, + "JPEG parameter struct mismatch: library thinks size is %u, caller expects %u") +JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access") +JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small") +JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here") +JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet") +JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d") +JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request") +JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d") +JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x") +JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d") +JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d") +JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)") +JMESSAGE(JERR_EMS_READ, "Read from EMS failed") +JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed") +JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") +JMESSAGE(JERR_FILE_READ, "Input file read error") +JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") +JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") +JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") +JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") +JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") +JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") +JMESSAGE(JERR_INPUT_EOF, "Premature end of input file") +JMESSAGE(JERR_MISMATCHED_QUANT_TABLE, + "Cannot transcode due to multiple use of quantization table %d") +JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") +JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") +JMESSAGE(JERR_NOTIMPL, "Not implemented yet") +JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") +JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined") +JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") +JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") +JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") +JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined") +JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x") +JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)") +JMESSAGE(JERR_QUANT_COMPONENTS, + "Cannot quantize more than %d color components") +JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") +JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") +JMESSAGE(JERR_SOF_BEFORE, "Invalid JPEG file structure: %s before SOF") +JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") +JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") +JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") +JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") +JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") +JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") +JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") +JMESSAGE(JERR_TFILE_WRITE, + "Write failed on temporary file --- out of disk space?") +JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines") +JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x") +JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up") +JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation") +JMESSAGE(JERR_XMS_READ, "Read from XMS failed") +JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed") +JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT) +JMESSAGE(JMSG_VERSION, JVERSION) +JMESSAGE(JTRC_16BIT_TABLES, + "Caution: quantization tables are too coarse for baseline JPEG") +JMESSAGE(JTRC_ADOBE, + "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d") +JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u") +JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u") +JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x") +JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x") +JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d") +JMESSAGE(JTRC_DRI, "Define Restart Interval %u") +JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u") +JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u") +JMESSAGE(JTRC_EOI, "End Of Image") +JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d") +JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d %d") +JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE, + "Warning: thumbnail image size does not match data length %u") +JMESSAGE(JTRC_JFIF_EXTENSION, + "JFIF extension marker: type 0x%02x, length %u") +JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image") +JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u") +JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x") +JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u") +JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors") +JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors") +JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization") +JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d") +JMESSAGE(JTRC_RST, "RST%d") +JMESSAGE(JTRC_SMOOTH_NOTIMPL, + "Smoothing not supported with nonstandard sampling ratios") +JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d") +JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d") +JMESSAGE(JTRC_SOI, "Start of Image") +JMESSAGE(JTRC_SOS, "Start Of Scan: %d components") +JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d") +JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d") +JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s") +JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s") +JMESSAGE(JTRC_THUMB_JPEG, + "JFIF extension marker: JPEG-compressed thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_PALETTE, + "JFIF extension marker: palette thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_RGB, + "JFIF extension marker: RGB thumbnail image, length %u") +JMESSAGE(JTRC_UNKNOWN_IDS, + "Unrecognized component IDs %d %d %d, assuming YCbCr") +JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") +JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") +JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") +JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code") +JMESSAGE(JWRN_BOGUS_PROGRESSION, + "Inconsistent progression sequence for component %d coefficient %d") +JMESSAGE(JWRN_EXTRANEOUS_DATA, + "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x") +JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment") +JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code") +JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d") +JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file") +JMESSAGE(JWRN_MUST_RESYNC, + "Corrupt JPEG data: found marker 0x%02x instead of RST%d") +JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG") +JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") + +#ifdef JMAKE_ENUM_LIST + + JMSG_LASTMSGCODE +} J_MESSAGE_CODE; + +#undef JMAKE_ENUM_LIST +#endif /* JMAKE_ENUM_LIST */ + +/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ +#undef JMESSAGE + + +#ifndef JERROR_H +#define JERROR_H + +/* Macros to simplify using the error and trace message stuff */ +/* The first parameter is either type of cinfo pointer */ + +/* Fatal errors (print message and exit) */ +#define ERREXIT(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT3(cinfo,code,p1,p2,p3) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT6(cinfo,code,p1,p2,p3,p4,p5,p6) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (cinfo)->err->msg_parm.i[4] = (p5), \ + (cinfo)->err->msg_parm.i[5] = (p6), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXITS(cinfo,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) + +#define MAKESTMT(stuff) do { stuff } while (0) + +/* Nonfatal errors (we can keep going, but the data is probably corrupt) */ +#define WARNMS(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) + +/* Informational/debugging messages */ +#define TRACEMS(cinfo,lvl,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS1(cinfo,lvl,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS2(cinfo,lvl,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMSS(cinfo,lvl,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) + +#endif /* JERROR_H */ diff --git a/src/SDL2/VisualC/external/include/jmorecfg.h b/src/SDL2/VisualC/external/include/jmorecfg.h new file mode 100755 index 000000000..2407edbef --- /dev/null +++ b/src/SDL2/VisualC/external/include/jmorecfg.h @@ -0,0 +1,390 @@ +/* + * jmorecfg.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 1997-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains additional configuration options that customize the + * JPEG software for special applications or support machine-dependent + * optimizations. Most users will not need to touch this file. + */ + + +/* + * Define BITS_IN_JSAMPLE as either + * 8 for 8-bit sample values (the usual setting) + * 12 for 12-bit sample values + * Only 8 and 12 are legal data precisions for lossy JPEG according to the + * JPEG standard, and the IJG code does not support anything else! + * We do not support run-time selection of data precision, sorry. + */ + +#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */ + + +/* + * Maximum number of components (color channels) allowed in JPEG image. + * To meet the letter of the JPEG spec, set this to 255. However, darn + * few applications need more than 4 channels (maybe 5 for CMYK + alpha + * mask). We recommend 10 as a reasonable compromise; use 4 if you are + * really short on memory. (Each allowed component costs a hundred or so + * bytes of storage, whether actually used in an image or not.) + */ + +#define MAX_COMPONENTS 10 /* maximum number of image components */ + + +/* + * Basic data types. + * You may need to change these if you have a machine with unusual data + * type sizes; for example, "char" not 8 bits, "short" not 16 bits, + * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits, + * but it had better be at least 16. + */ + +/* Representation of a single sample (pixel element value). + * We frequently allocate large arrays of these, so it's important to keep + * them small. But if you have memory to burn and access to char or short + * arrays is very slow on your hardware, you might want to change these. + */ + +#if BITS_IN_JSAMPLE == 8 +/* JSAMPLE should be the smallest type that will hold the values 0..255. + * You can use a signed char by having GETJSAMPLE mask it with 0xFF. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JSAMPLE; +#ifdef CHAR_IS_UNSIGNED +#define GETJSAMPLE(value) ((int) (value)) +#else +#define GETJSAMPLE(value) ((int) (value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + +#define MAXJSAMPLE 255 +#define CENTERJSAMPLE 128 + +#endif /* BITS_IN_JSAMPLE == 8 */ + + +#if BITS_IN_JSAMPLE == 12 +/* JSAMPLE should be the smallest type that will hold the values 0..4095. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 4095 +#define CENTERJSAMPLE 2048 + +#endif /* BITS_IN_JSAMPLE == 12 */ + + +/* Representation of a DCT frequency coefficient. + * This should be a signed value of at least 16 bits; "short" is usually OK. + * Again, we allocate large arrays of these, but you can change to int + * if you have memory to burn and "short" is really slow. + */ + +typedef short JCOEF; + + +/* Compressed datastreams are represented as arrays of JOCTET. + * These must be EXACTLY 8 bits wide, at least once they are written to + * external storage. Note that when using the stdio data source/destination + * managers, this is also the data type passed to fread/fwrite. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JOCTET; +#define GETJOCTET(value) (value) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JOCTET; +#ifdef CHAR_IS_UNSIGNED +#define GETJOCTET(value) (value) +#else +#define GETJOCTET(value) ((value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + + +/* These typedefs are used for various table entries and so forth. + * They must be at least as wide as specified; but making them too big + * won't cost a huge amount of memory, so we don't provide special + * extraction code like we did for JSAMPLE. (In other words, these + * typedefs live at a different point on the speed/space tradeoff curve.) + */ + +/* UINT8 must hold at least the values 0..255. */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char UINT8; +#else /* not HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char UINT8; +#else /* not CHAR_IS_UNSIGNED */ +typedef short UINT8; +#endif /* CHAR_IS_UNSIGNED */ +#endif /* HAVE_UNSIGNED_CHAR */ + +/* UINT16 must hold at least the values 0..65535. */ + +#ifdef HAVE_UNSIGNED_SHORT +typedef unsigned short UINT16; +#else /* not HAVE_UNSIGNED_SHORT */ +typedef unsigned int UINT16; +#endif /* HAVE_UNSIGNED_SHORT */ + +/* INT16 must hold at least the values -32768..32767. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */ +typedef short INT16; +#endif + +/* INT32 must hold at least signed 32-bit values. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */ +#ifndef _BASETSD_H_ /* Microsoft defines it in basetsd.h */ +#ifndef _BASETSD_H /* MinGW is slightly different */ +#ifndef QGLOBAL_H /* Qt defines it in qglobal.h */ +typedef long INT32; +#endif +#endif +#endif +#endif + +/* Datatype used for image dimensions. The JPEG standard only supports + * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore + * "unsigned int" is sufficient on all machines. However, if you need to + * handle larger images and you don't mind deviating from the spec, you + * can change this datatype. + */ + +typedef unsigned int JDIMENSION; + +#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */ + + +/* These macros are used in all function definitions and extern declarations. + * You could modify them if you need to change function linkage conventions; + * in particular, you'll need to do that to make the library a Windows DLL. + * Another application is to make all functions global for use with debuggers + * or code profilers that require it. + */ + +/* a function called through method pointers: */ +#define METHODDEF(type) static type +/* a function used only in its module: */ +#define LOCAL(type) static type +/* a function referenced thru EXTERNs: */ +#define GLOBAL(type) type +/* a reference to a GLOBAL function: */ +#define EXTERN(type) extern type + + +/* This macro is used to declare a "method", that is, a function pointer. + * We want to supply prototype parameters if the compiler can cope. + * Note that the arglist parameter must be parenthesized! + * Again, you can customize this if you need special linkage keywords. + */ + +#ifdef HAVE_PROTOTYPES +#define JMETHOD(type,methodname,arglist) type (*methodname) arglist +#else +#define JMETHOD(type,methodname,arglist) type (*methodname) () +#endif + + +/* The noreturn type identifier is used to declare functions + * which cannot return. + * Compilers can thus create more optimized code and perform + * better checks for warnings and errors. + * Static analyzer tools can make improved inferences about + * execution paths and are prevented from giving false alerts. + * + * Unfortunately, the proposed specifications of corresponding + * extensions in the Dec 2011 ISO C standard revision (C11), + * GCC, MSVC, etc. are not viable. + * Thus we introduce a user defined type to declare noreturn + * functions at least for clarity. A proper compiler would + * have a suitable noreturn type to match in place of void. + */ + +#ifndef HAVE_NORETURN_T +typedef void noreturn_t; +#endif + + +/* Here is the pseudo-keyword for declaring pointers that must be "far" + * on 80x86 machines. Most of the specialized coding for 80x86 is handled + * by just saying "FAR *" where such a pointer is needed. In a few places + * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. + */ + +#ifndef FAR +#ifdef NEED_FAR_POINTERS +#define FAR far +#else +#define FAR +#endif +#endif + + +/* + * On a few systems, type boolean and/or its values FALSE, TRUE may appear + * in standard header files. Or you may have conflicts with application- + * specific header files that you want to include together with these files. + * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. + */ + +#ifdef HAVE_BOOLEAN +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif +#else +typedef enum { FALSE = 0, TRUE = 1 } boolean; +#endif + + +/* + * The remaining options affect code selection within the JPEG library, + * but they don't need to be visible to most applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined. + */ + +#ifdef JPEG_INTERNALS +#define JPEG_INTERNAL_OPTIONS +#endif + +#ifdef JPEG_INTERNAL_OPTIONS + + +/* + * These defines indicate whether to include various optional functions. + * Undefining some of these symbols will produce a smaller but less capable + * library. Note that you can leave certain source files out of the + * compilation/linking process if you've #undef'd the corresponding symbols. + * (You may HAVE to do that if your compiler doesn't like null source files.) + */ + +/* Capability options common to encoder and decoder: */ + +#define DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ +#define DCT_IFAST_SUPPORTED /* faster, less accurate integer method */ +#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */ + +/* Encoder capability options: */ + +#define C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define DCT_SCALING_SUPPORTED /* Input rescaling via DCT? (Requires DCT_ISLOW)*/ +#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ +/* Note: if you selected 12-bit data precision, it is dangerous to turn off + * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit + * precision, so jchuff.c normally uses entropy optimization to compute + * usable tables for higher precision. If you don't want to do optimization, + * you'll have to supply different default Huffman tables. + * The exact same statements apply for progressive JPEG: the default tables + * don't work for progressive mode. (This may get fixed, however.) + */ +#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */ + +/* Decoder capability options: */ + +#define D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */ +#define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */ +#define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ +#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ +#define UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ +#define QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ +#define QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */ + +/* more capability options later, no doubt */ + + +/* + * Ordering of RGB data in scanlines passed to or from the application. + * If your application wants to deal with data in the order B,G,R, just + * change these macros. You can also deal with formats such as R,G,B,X + * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing + * the offsets will also change the order in which colormap data is organized. + * RESTRICTIONS: + * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. + * 2. The color quantizer modules will not behave desirably if RGB_PIXELSIZE + * is not 3 (they don't understand about dummy color components!). So you + * can't use color quantization if you change that value. + */ + +#define RGB_RED 0 /* Offset of Red in an RGB scanline element */ +#define RGB_GREEN 1 /* Offset of Green */ +#define RGB_BLUE 2 /* Offset of Blue */ +#define RGB_PIXELSIZE 3 /* JSAMPLEs per RGB scanline element */ + + +/* Definitions for speed-related optimizations. */ + + +/* If your compiler supports inline functions, define INLINE + * as the inline keyword; otherwise define it as empty. + */ + +#ifndef INLINE +#ifdef __GNUC__ /* for instance, GNU C knows about inline */ +#define INLINE __inline__ +#endif +#ifndef INLINE +#define INLINE /* default is to define it as empty */ +#endif +#endif + + +/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying + * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER + * as short on such a machine. MULTIPLIER must be at least 16 bits wide. + */ + +#ifndef MULTIPLIER +#define MULTIPLIER int /* type for fastest integer multiply */ +#endif + + +/* FAST_FLOAT should be either float or double, whichever is done faster + * by your compiler. (Note that this type is only used in the floating point + * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.) + * Typically, float is faster in ANSI C compilers, while double is faster in + * pre-ANSI compilers (because they insist on converting to double anyway). + * The code below therefore chooses float if we have ANSI-style prototypes. + */ + +#ifndef FAST_FLOAT +#ifdef HAVE_PROTOTYPES +#define FAST_FLOAT float +#else +#define FAST_FLOAT double +#endif +#endif + +#endif /* JPEG_INTERNAL_OPTIONS */ diff --git a/src/SDL2/VisualC/external/include/jpeglib.h b/src/SDL2/VisualC/external/include/jpeglib.h new file mode 100755 index 000000000..0a6dac44c --- /dev/null +++ b/src/SDL2/VisualC/external/include/jpeglib.h @@ -0,0 +1,1173 @@ +/* + * jpeglib.h + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2002-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the application interface for the JPEG library. + * Most applications using the library need only include this file, + * and perhaps jerror.h if they want to know the exact error codes. + */ + +#ifndef JPEGLIB_H +#define JPEGLIB_H + +/* + * First we include the configuration files that record how this + * installation of the JPEG library is set up. jconfig.h can be + * generated automatically for many systems. jmorecfg.h contains + * manual configuration options that most people need not worry about. + */ + +#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ +#include "jconfig.h" /* widely used configuration options */ +#endif +#include "jmorecfg.h" /* seldom changed options */ + + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +extern "C" { +#endif +#endif + +/* Version IDs for the JPEG library. + * Might be useful for tests like "#if JPEG_LIB_VERSION >= 90". + */ + +#define JPEG_LIB_VERSION 90 /* Compatibility version 9.0 */ +#define JPEG_LIB_VERSION_MAJOR 9 +#define JPEG_LIB_VERSION_MINOR 0 + + +/* Various constants determining the sizes of things. + * All of these are specified by the JPEG standard, so don't change them + * if you want to be compatible. + */ + +#define DCTSIZE 8 /* The basic DCT block is 8x8 coefficients */ +#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ +#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ +#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ +#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ +#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ +#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ +/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; + * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. + * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU + * to handle it. We even let you do this from the jconfig.h file. However, + * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe + * sometimes emits noncompliant files doesn't mean you should too. + */ +#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ +#ifndef D_MAX_BLOCKS_IN_MCU +#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ +#endif + + +/* Data structures for images (arrays of samples and of DCT coefficients). + * On 80x86 machines, the image arrays are too big for near pointers, + * but the pointer arrays can fit in near memory. + */ + +typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ +typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ +typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ + +typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ +typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ +typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ +typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ + +typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ + + +/* Types for JPEG compression parameters and working tables. */ + + +/* DCT coefficient quantization tables. */ + +typedef struct { + /* This array gives the coefficient quantizers in natural array order + * (not the zigzag order in which they are stored in a JPEG DQT marker). + * CAUTION: IJG versions prior to v6a kept this array in zigzag order. + */ + UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JQUANT_TBL; + + +/* Huffman coding tables. */ + +typedef struct { + /* These two fields directly represent the contents of a JPEG DHT marker */ + UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ + /* length k bits; bits[0] is unused */ + UINT8 huffval[256]; /* The symbols, in order of incr code length */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JHUFF_TBL; + + +/* Basic info about one component (color channel). */ + +typedef struct { + /* These values are fixed over the whole image. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOF marker. */ + int component_id; /* identifier for this component (0..255) */ + int component_index; /* its index in SOF or cinfo->comp_info[] */ + int h_samp_factor; /* horizontal sampling factor (1..4) */ + int v_samp_factor; /* vertical sampling factor (1..4) */ + int quant_tbl_no; /* quantization table selector (0..3) */ + /* These values may vary between scans. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOS marker. */ + /* The decompressor output side may not use these variables. */ + int dc_tbl_no; /* DC entropy table selector (0..3) */ + int ac_tbl_no; /* AC entropy table selector (0..3) */ + + /* Remaining fields should be treated as private by applications. */ + + /* These values are computed during compression or decompression startup: */ + /* Component's size in DCT blocks. + * Any dummy blocks added to complete an MCU are not counted; therefore + * these values do not depend on whether a scan is interleaved or not. + */ + JDIMENSION width_in_blocks; + JDIMENSION height_in_blocks; + /* Size of a DCT block in samples, + * reflecting any scaling we choose to apply during the DCT step. + * Values from 1 to 16 are supported. + * Note that different components may receive different DCT scalings. + */ + int DCT_h_scaled_size; + int DCT_v_scaled_size; + /* The downsampled dimensions are the component's actual, unpadded number + * of samples at the main buffer (preprocessing/compression interface); + * DCT scaling is included, so + * downsampled_width = ceil(image_width * Hi/Hmax * DCT_h_scaled_size/DCTSIZE) + * and similarly for height. + */ + JDIMENSION downsampled_width; /* actual width in samples */ + JDIMENSION downsampled_height; /* actual height in samples */ + /* This flag is used only for decompression. In cases where some of the + * components will be ignored (eg grayscale output from YCbCr image), + * we can skip most computations for the unused components. + */ + boolean component_needed; /* do we need the value of this component? */ + + /* These values are computed before starting a scan of the component. */ + /* The decompressor output side may not use these variables. */ + int MCU_width; /* number of blocks per MCU, horizontally */ + int MCU_height; /* number of blocks per MCU, vertically */ + int MCU_blocks; /* MCU_width * MCU_height */ + int MCU_sample_width; /* MCU width in samples: MCU_width * DCT_h_scaled_size */ + int last_col_width; /* # of non-dummy blocks across in last MCU */ + int last_row_height; /* # of non-dummy blocks down in last MCU */ + + /* Saved quantization table for component; NULL if none yet saved. + * See jdinput.c comments about the need for this information. + * This field is currently used only for decompression. + */ + JQUANT_TBL * quant_table; + + /* Private per-component storage for DCT or IDCT subsystem. */ + void * dct_table; +} jpeg_component_info; + + +/* The script for encoding a multiple-scan file is an array of these: */ + +typedef struct { + int comps_in_scan; /* number of components encoded in this scan */ + int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ + int Ss, Se; /* progressive JPEG spectral selection parms */ + int Ah, Al; /* progressive JPEG successive approx. parms */ +} jpeg_scan_info; + +/* The decompressor can save APPn and COM markers in a list of these: */ + +typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr; + +struct jpeg_marker_struct { + jpeg_saved_marker_ptr next; /* next in list, or NULL */ + UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */ + unsigned int original_length; /* # bytes of data in the file */ + unsigned int data_length; /* # bytes of data saved at data[] */ + JOCTET FAR * data; /* the data contained in the marker */ + /* the marker length word is not counted in data_length or original_length */ +}; + +/* Known color spaces. */ + +typedef enum { + JCS_UNKNOWN, /* error/unspecified */ + JCS_GRAYSCALE, /* monochrome */ + JCS_RGB, /* red/green/blue */ + JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ + JCS_CMYK, /* C/M/Y/K */ + JCS_YCCK /* Y/Cb/Cr/K */ +} J_COLOR_SPACE; + +/* Supported color transforms. */ + +typedef enum { + JCT_NONE = 0, + JCT_SUBTRACT_GREEN = 1 +} J_COLOR_TRANSFORM; + +/* DCT/IDCT algorithm options. */ + +typedef enum { + JDCT_ISLOW, /* slow but accurate integer algorithm */ + JDCT_IFAST, /* faster, less accurate integer method */ + JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ +} J_DCT_METHOD; + +#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ +#define JDCT_DEFAULT JDCT_ISLOW +#endif +#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ +#define JDCT_FASTEST JDCT_IFAST +#endif + +/* Dithering options for decompression. */ + +typedef enum { + JDITHER_NONE, /* no dithering */ + JDITHER_ORDERED, /* simple ordered dither */ + JDITHER_FS /* Floyd-Steinberg error diffusion dither */ +} J_DITHER_MODE; + + +/* Common fields between JPEG compression and decompression master structs. */ + +#define jpeg_common_fields \ + struct jpeg_error_mgr * err; /* Error handler module */\ + struct jpeg_memory_mgr * mem; /* Memory manager module */\ + struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ + void * client_data; /* Available for use by application */\ + boolean is_decompressor; /* So common code can tell which is which */\ + int global_state /* For checking call sequence validity */ + +/* Routines that are to be used by both halves of the library are declared + * to receive a pointer to this structure. There are no actual instances of + * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. + */ +struct jpeg_common_struct { + jpeg_common_fields; /* Fields common to both master struct types */ + /* Additional fields follow in an actual jpeg_compress_struct or + * jpeg_decompress_struct. All three structs must agree on these + * initial fields! (This would be a lot cleaner in C++.) + */ +}; + +typedef struct jpeg_common_struct * j_common_ptr; +typedef struct jpeg_compress_struct * j_compress_ptr; +typedef struct jpeg_decompress_struct * j_decompress_ptr; + + +/* Master record for a compression instance */ + +struct jpeg_compress_struct { + jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ + + /* Destination for compressed data */ + struct jpeg_destination_mgr * dest; + + /* Description of source image --- these fields must be filled in by + * outer application before starting compression. in_color_space must + * be correct before you can even call jpeg_set_defaults(). + */ + + JDIMENSION image_width; /* input image width */ + JDIMENSION image_height; /* input image height */ + int input_components; /* # of color components in input image */ + J_COLOR_SPACE in_color_space; /* colorspace of input image */ + + double input_gamma; /* image gamma of input image */ + + /* Compression parameters --- these fields must be set before calling + * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to + * initialize everything to reasonable defaults, then changing anything + * the application specifically wants to change. That way you won't get + * burnt when new parameters are added. Also note that there are several + * helper routines to simplify changing parameters. + */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + JDIMENSION jpeg_width; /* scaled JPEG image width */ + JDIMENSION jpeg_height; /* scaled JPEG image height */ + /* Dimensions of actual JPEG image that will be written to file, + * derived from input dimensions by scaling factors above. + * These fields are computed by jpeg_start_compress(). + * You can also use jpeg_calc_jpeg_dimensions() to determine these values + * in advance of calling jpeg_start_compress(). + */ + + int data_precision; /* bits of precision in image data */ + + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + int q_scale_factor[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined, + * and corresponding scale factors (percentage, initialized 100). + */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + int num_scans; /* # of entries in scan_info array */ + const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ + /* The default value of scan_info is NULL, which causes a single-scan + * sequential JPEG file to be emitted. To create a multi-scan file, + * set num_scans and scan_info to point to an array of scan definitions. + */ + + boolean raw_data_in; /* TRUE=caller supplies downsampled data */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */ + int smoothing_factor; /* 1..100, or 0 for no input smoothing */ + J_DCT_METHOD dct_method; /* DCT algorithm selector */ + + /* The restart interval can be specified in absolute MCUs by setting + * restart_interval, or in MCU rows by setting restart_in_rows + * (in which case the correct restart_interval will be figured + * for each scan). + */ + unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ + int restart_in_rows; /* if > 0, MCU rows per restart interval */ + + /* Parameters controlling emission of special markers. */ + + boolean write_JFIF_header; /* should a JFIF marker be written? */ + UINT8 JFIF_major_version; /* What to write for the JFIF version number */ + UINT8 JFIF_minor_version; + /* These three values are not used by the JPEG code, merely copied */ + /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ + /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ + /* ratio is defined by X_density/Y_density even when density_unit=0. */ + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean write_Adobe_marker; /* should an Adobe marker be written? */ + + J_COLOR_TRANSFORM color_transform; + /* Color transform identifier, writes LSE marker if nonzero */ + + /* State variable: index of next scanline to be written to + * jpeg_write_scanlines(). Application may use this to control its + * processing loop, e.g., "while (next_scanline < image_height)". + */ + + JDIMENSION next_scanline; /* 0 .. image_height-1 */ + + /* Remaining fields are known throughout compressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during compression startup + */ + boolean progressive_mode; /* TRUE if scan script uses progressive mode */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ + /* The coefficient controller receives data in units of MCU rows as defined + * for fully interleaved scans (whether the JPEG file is interleaved or not). + * There are v_samp_factor * DCTSIZE sample rows of each component in an + * "iMCU" (interleaved MCU) row. + */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[C_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) */ + + /* + * Links to compression subobjects (methods and private variables of modules) + */ + struct jpeg_comp_master * master; + struct jpeg_c_main_controller * main; + struct jpeg_c_prep_controller * prep; + struct jpeg_c_coef_controller * coef; + struct jpeg_marker_writer * marker; + struct jpeg_color_converter * cconvert; + struct jpeg_downsampler * downsample; + struct jpeg_forward_dct * fdct; + struct jpeg_entropy_encoder * entropy; + jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */ + int script_space_size; +}; + + +/* Master record for a decompression instance */ + +struct jpeg_decompress_struct { + jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ + + /* Source of compressed data */ + struct jpeg_source_mgr * src; + + /* Basic description of image --- filled in by jpeg_read_header(). */ + /* Application may inspect these values to decide how to process image. */ + + JDIMENSION image_width; /* nominal image width (from SOF marker) */ + JDIMENSION image_height; /* nominal image height */ + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + /* Decompression processing parameters --- these fields must be set before + * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes + * them to default values. + */ + + J_COLOR_SPACE out_color_space; /* colorspace for output */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + double output_gamma; /* image gamma wanted in output */ + + boolean buffered_image; /* TRUE=multiple output passes */ + boolean raw_data_out; /* TRUE=downsampled data wanted */ + + J_DCT_METHOD dct_method; /* IDCT algorithm selector */ + boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ + boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ + + boolean quantize_colors; /* TRUE=colormapped output wanted */ + /* the following are ignored if not quantize_colors: */ + J_DITHER_MODE dither_mode; /* type of color dithering to use */ + boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ + int desired_number_of_colors; /* max # colors to use in created colormap */ + /* these are significant only in buffered-image mode: */ + boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ + boolean enable_external_quant;/* enable future use of external colormap */ + boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ + + /* Description of actual output image that will be returned to application. + * These fields are computed by jpeg_start_decompress(). + * You can also use jpeg_calc_output_dimensions() to determine these values + * in advance of calling jpeg_start_decompress(). + */ + + JDIMENSION output_width; /* scaled image width */ + JDIMENSION output_height; /* scaled image height */ + int out_color_components; /* # of color components in out_color_space */ + int output_components; /* # of color components returned */ + /* output_components is 1 (a colormap index) when quantizing colors; + * otherwise it equals out_color_components. + */ + int rec_outbuf_height; /* min recommended height of scanline buffer */ + /* If the buffer passed to jpeg_read_scanlines() is less than this many rows + * high, space and time will be wasted due to unnecessary data copying. + * Usually rec_outbuf_height will be 1 or 2, at most 4. + */ + + /* When quantizing colors, the output colormap is described by these fields. + * The application can supply a colormap by setting colormap non-NULL before + * calling jpeg_start_decompress; otherwise a colormap is created during + * jpeg_start_decompress or jpeg_start_output. + * The map has out_color_components rows and actual_number_of_colors columns. + */ + int actual_number_of_colors; /* number of entries in use */ + JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ + + /* State variables: these variables indicate the progress of decompression. + * The application may examine these but must not modify them. + */ + + /* Row index of next scanline to be read from jpeg_read_scanlines(). + * Application may use this to control its processing loop, e.g., + * "while (output_scanline < output_height)". + */ + JDIMENSION output_scanline; /* 0 .. output_height-1 */ + + /* Current input scan number and number of iMCU rows completed in scan. + * These indicate the progress of the decompressor input side. + */ + int input_scan_number; /* Number of SOS markers seen so far */ + JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ + + /* The "output scan number" is the notional scan being displayed by the + * output side. The decompressor will not allow output scan/row number + * to get ahead of input scan/row, but it can fall arbitrarily far behind. + */ + int output_scan_number; /* Nominal scan number being displayed */ + JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ + + /* Current progression status. coef_bits[c][i] indicates the precision + * with which component c's DCT coefficient i (in zigzag order) is known. + * It is -1 when no data has yet been received, otherwise it is the point + * transform (shift) value for the most recent scan of the coefficient + * (thus, 0 at completion of the progression). + * This pointer is NULL when reading a non-progressive file. + */ + int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ + + /* Internal JPEG parameters --- the application usually need not look at + * these fields. Note that the decompressor output side may not use + * any parameters that can change between scans. + */ + + /* Quantization and Huffman tables are carried forward across input + * datastreams when processing abbreviated JPEG datastreams. + */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + /* These parameters are never carried across datastreams, since they + * are given in SOF/SOS markers or defined to be reset by SOI. + */ + + int data_precision; /* bits of precision in image data */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + boolean is_baseline; /* TRUE if Baseline SOF0 encountered */ + boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ + + /* These fields record data obtained from optional markers recognized by + * the JPEG library. + */ + boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ + /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ + UINT8 JFIF_major_version; /* JFIF version number */ + UINT8 JFIF_minor_version; + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ + UINT8 Adobe_transform; /* Color transform code from Adobe marker */ + + J_COLOR_TRANSFORM color_transform; + /* Color transform identifier derived from LSE marker, otherwise zero */ + + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + + /* Aside from the specific data retained from APPn markers known to the + * library, the uninterpreted contents of any or all APPn and COM markers + * can be saved in a list for examination by the application. + */ + jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */ + + /* Remaining fields are known throughout decompressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during decompression startup + */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ + /* The coefficient controller's input and output progress is measured in + * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows + * in fully interleaved JPEG scans, but are used whether the scan is + * interleaved or not. We define an iMCU row as v_samp_factor DCT block + * rows of each component. Therefore, the IDCT output contains + * v_samp_factor*DCT_v_scaled_size sample rows of a component per iMCU row. + */ + + JSAMPLE * sample_range_limit; /* table for fast range-limiting */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + * Note that the decompressor output side must not use these fields. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[D_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + /* These fields are derived from Se of first SOS marker. + */ + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array for entropy decode */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) for entropy decode */ + + /* This field is shared between entropy decoder and marker parser. + * It is either zero or the code of a JPEG marker that has been + * read from the data source, but has not yet been processed. + */ + int unread_marker; + + /* + * Links to decompression subobjects (methods, private variables of modules) + */ + struct jpeg_decomp_master * master; + struct jpeg_d_main_controller * main; + struct jpeg_d_coef_controller * coef; + struct jpeg_d_post_controller * post; + struct jpeg_input_controller * inputctl; + struct jpeg_marker_reader * marker; + struct jpeg_entropy_decoder * entropy; + struct jpeg_inverse_dct * idct; + struct jpeg_upsampler * upsample; + struct jpeg_color_deconverter * cconvert; + struct jpeg_color_quantizer * cquantize; +}; + + +/* "Object" declarations for JPEG modules that may be supplied or called + * directly by the surrounding application. + * As with all objects in the JPEG library, these structs only define the + * publicly visible methods and state variables of a module. Additional + * private fields may exist after the public ones. + */ + + +/* Error handler object */ + +struct jpeg_error_mgr { + /* Error exit handler: does not return to caller */ + JMETHOD(noreturn_t, error_exit, (j_common_ptr cinfo)); + /* Conditionally emit a trace or warning message */ + JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); + /* Routine that actually outputs a trace or error message */ + JMETHOD(void, output_message, (j_common_ptr cinfo)); + /* Format a message string for the most recent JPEG error or message */ + JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); +#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ + /* Reset error state variables at start of a new image */ + JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); + + /* The message ID code and any parameters are saved here. + * A message can have one string parameter or up to 8 int parameters. + */ + int msg_code; +#define JMSG_STR_PARM_MAX 80 + union { + int i[8]; + char s[JMSG_STR_PARM_MAX]; + } msg_parm; + + /* Standard state variables for error facility */ + + int trace_level; /* max msg_level that will be displayed */ + + /* For recoverable corrupt-data errors, we emit a warning message, + * but keep going unless emit_message chooses to abort. emit_message + * should count warnings in num_warnings. The surrounding application + * can check for bad data by seeing if num_warnings is nonzero at the + * end of processing. + */ + long num_warnings; /* number of corrupt-data warnings */ + + /* These fields point to the table(s) of error message strings. + * An application can change the table pointer to switch to a different + * message list (typically, to change the language in which errors are + * reported). Some applications may wish to add additional error codes + * that will be handled by the JPEG library error mechanism; the second + * table pointer is used for this purpose. + * + * First table includes all errors generated by JPEG library itself. + * Error code 0 is reserved for a "no such error string" message. + */ + const char * const * jpeg_message_table; /* Library errors */ + int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ + /* Second table can be added by application (see cjpeg/djpeg for example). + * It contains strings numbered first_addon_message..last_addon_message. + */ + const char * const * addon_message_table; /* Non-library errors */ + int first_addon_message; /* code for first string in addon table */ + int last_addon_message; /* code for last string in addon table */ +}; + + +/* Progress monitor object */ + +struct jpeg_progress_mgr { + JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); + + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +}; + + +/* Data destination object for compression */ + +struct jpeg_destination_mgr { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + + JMETHOD(void, init_destination, (j_compress_ptr cinfo)); + JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); + JMETHOD(void, term_destination, (j_compress_ptr cinfo)); +}; + + +/* Data source object for decompression */ + +struct jpeg_source_mgr { + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + + JMETHOD(void, init_source, (j_decompress_ptr cinfo)); + JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); + JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); + JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); + JMETHOD(void, term_source, (j_decompress_ptr cinfo)); +}; + + +/* Memory manager object. + * Allocates "small" objects (a few K total), "large" objects (tens of K), + * and "really big" objects (virtual arrays with backing store if needed). + * The memory manager does not allow individual objects to be freed; rather, + * each created object is assigned to a pool, and whole pools can be freed + * at once. This is faster and more convenient than remembering exactly what + * to free, especially where malloc()/free() are not too speedy. + * NB: alloc routines never return NULL. They exit to error_exit if not + * successful. + */ + +#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ +#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ +#define JPOOL_NUMPOOLS 2 + +typedef struct jvirt_sarray_control * jvirt_sarray_ptr; +typedef struct jvirt_barray_control * jvirt_barray_ptr; + + +struct jpeg_memory_mgr { + /* Method pointers */ + JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, + JDIMENSION numrows)); + JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, + JDIMENSION numrows)); + JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION samplesperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION blocksperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); + JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, + jvirt_sarray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, + jvirt_barray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); + JMETHOD(void, self_destruct, (j_common_ptr cinfo)); + + /* Limit on memory allocation for this JPEG object. (Note that this is + * merely advisory, not a guaranteed maximum; it only affects the space + * used for virtual-array buffers.) May be changed by outer application + * after creating the JPEG object. + */ + long max_memory_to_use; + + /* Maximum allocation request accepted by alloc_large. */ + long max_alloc_chunk; +}; + + +/* Routine signature for application-supplied marker processing methods. + * Need not pass marker code since it is stored in cinfo->unread_marker. + */ +typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); + + +/* Declarations for routines called by application. + * The JPP macro hides prototype parameters from compilers that can't cope. + * Note JPP requires double parentheses. + */ + +#ifdef HAVE_PROTOTYPES +#define JPP(arglist) arglist +#else +#define JPP(arglist) () +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. + * We shorten external names to be unique in the first six letters, which + * is good enough for all known systems. + * (If your compiler itself needs names to be unique in less than 15 + * characters, you are out of luck. Get a better compiler.) + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_error jStdError +#define jpeg_CreateCompress jCreaCompress +#define jpeg_CreateDecompress jCreaDecompress +#define jpeg_destroy_compress jDestCompress +#define jpeg_destroy_decompress jDestDecompress +#define jpeg_stdio_dest jStdDest +#define jpeg_stdio_src jStdSrc +#define jpeg_mem_dest jMemDest +#define jpeg_mem_src jMemSrc +#define jpeg_set_defaults jSetDefaults +#define jpeg_set_colorspace jSetColorspace +#define jpeg_default_colorspace jDefColorspace +#define jpeg_set_quality jSetQuality +#define jpeg_set_linear_quality jSetLQuality +#define jpeg_default_qtables jDefQTables +#define jpeg_add_quant_table jAddQuantTable +#define jpeg_quality_scaling jQualityScaling +#define jpeg_simple_progression jSimProgress +#define jpeg_suppress_tables jSuppressTables +#define jpeg_alloc_quant_table jAlcQTable +#define jpeg_alloc_huff_table jAlcHTable +#define jpeg_start_compress jStrtCompress +#define jpeg_write_scanlines jWrtScanlines +#define jpeg_finish_compress jFinCompress +#define jpeg_calc_jpeg_dimensions jCjpegDimensions +#define jpeg_write_raw_data jWrtRawData +#define jpeg_write_marker jWrtMarker +#define jpeg_write_m_header jWrtMHeader +#define jpeg_write_m_byte jWrtMByte +#define jpeg_write_tables jWrtTables +#define jpeg_read_header jReadHeader +#define jpeg_start_decompress jStrtDecompress +#define jpeg_read_scanlines jReadScanlines +#define jpeg_finish_decompress jFinDecompress +#define jpeg_read_raw_data jReadRawData +#define jpeg_has_multiple_scans jHasMultScn +#define jpeg_start_output jStrtOutput +#define jpeg_finish_output jFinOutput +#define jpeg_input_complete jInComplete +#define jpeg_new_colormap jNewCMap +#define jpeg_consume_input jConsumeInput +#define jpeg_core_output_dimensions jCoreDimensions +#define jpeg_calc_output_dimensions jCalcDimensions +#define jpeg_save_markers jSaveMarkers +#define jpeg_set_marker_processor jSetMarker +#define jpeg_read_coefficients jReadCoefs +#define jpeg_write_coefficients jWrtCoefs +#define jpeg_copy_critical_parameters jCopyCrit +#define jpeg_abort_compress jAbrtCompress +#define jpeg_abort_decompress jAbrtDecompress +#define jpeg_abort jAbort +#define jpeg_destroy jDestroy +#define jpeg_resync_to_restart jResyncRestart +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Default error-management setup */ +EXTERN(struct jpeg_error_mgr *) jpeg_std_error + JPP((struct jpeg_error_mgr * err)); + +/* Initialization of JPEG compression objects. + * jpeg_create_compress() and jpeg_create_decompress() are the exported + * names that applications should call. These expand to calls on + * jpeg_CreateCompress and jpeg_CreateDecompress with additional information + * passed for version mismatch checking. + * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx. + */ +#define jpeg_create_compress(cinfo) \ + jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_compress_struct)) +#define jpeg_create_decompress(cinfo) \ + jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_decompress_struct)) +EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo, + int version, size_t structsize)); +EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo, + int version, size_t structsize)); +/* Destruction of JPEG compression objects */ +EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); + +/* Standard data source and destination managers: stdio streams. */ +/* Caller is responsible for opening the file before and closing after. */ +EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); +EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* Data source and destination managers: memory buffers. */ +EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo, + unsigned char ** outbuffer, + unsigned long * outsize)); +EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo, + unsigned char * inbuffer, + unsigned long insize)); + +/* Default parameter setup for compression */ +EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); +/* Compression parameter setup aids */ +EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, + J_COLOR_SPACE colorspace)); +EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, + boolean force_baseline)); +EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, + int scale_factor, + boolean force_baseline)); +EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo, + boolean force_baseline)); +EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, + boolean force_baseline)); +EXTERN(int) jpeg_quality_scaling JPP((int quality)); +EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, + boolean suppress)); +EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); +EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); + +/* Main entry points for compression */ +EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, + boolean write_all_tables)); +EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION num_lines)); +EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); + +/* Precalculate JPEG dimensions for current compression parameters. */ +EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo)); + +/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION num_lines)); + +/* Write a special marker. See libjpeg.txt concerning safe usage. */ +EXTERN(void) jpeg_write_marker + JPP((j_compress_ptr cinfo, int marker, + const JOCTET * dataptr, unsigned int datalen)); +/* Same, but piecemeal. */ +EXTERN(void) jpeg_write_m_header + JPP((j_compress_ptr cinfo, int marker, unsigned int datalen)); +EXTERN(void) jpeg_write_m_byte + JPP((j_compress_ptr cinfo, int val)); + +/* Alternate compression function: just write an abbreviated table file */ +EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); + +/* Decompression startup: read start of JPEG datastream to see what's there */ +EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, + boolean require_image)); +/* Return value is one of: */ +#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ +#define JPEG_HEADER_OK 1 /* Found valid image datastream */ +#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ +/* If you pass require_image = TRUE (normal case), you need not check for + * a TABLES_ONLY return code; an abbreviated file will cause an error exit. + * JPEG_SUSPENDED is only possible if you use a data source module that can + * give a suspension return (the stdio source module doesn't). + */ + +/* Main entry points for decompression */ +EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION max_lines)); +EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); + +/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION max_lines)); + +/* Additional entry points for buffered-image mode. */ +EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, + int scan_number)); +EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); +EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); +/* Return value is one of: */ +/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ +#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ +#define JPEG_REACHED_EOI 2 /* Reached end of image */ +#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ +#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ + +/* Precalculate output dimensions for current decompression parameters. */ +EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); + +/* Control saving of COM and APPn markers into marker_list. */ +EXTERN(void) jpeg_save_markers + JPP((j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit)); + +/* Install a special processing method for COM or APPn markers. */ +EXTERN(void) jpeg_set_marker_processor + JPP((j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine)); + +/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ +EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays)); +EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, + j_compress_ptr dstinfo)); + +/* If you choose to abort compression or decompression before completing + * jpeg_finish_(de)compress, then you need to clean up to release memory, + * temporary files, etc. You can just call jpeg_destroy_(de)compress + * if you're done with the JPEG object, but if you want to clean it up and + * reuse it, call this: + */ +EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); + +/* Generic versions of jpeg_abort and jpeg_destroy that work on either + * flavor of JPEG object. These may be more convenient in some places. + */ +EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); + +/* Default restart-marker-resync procedure for use by data source modules */ +EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, + int desired)); + + +/* These marker codes are exported since applications and data source modules + * are likely to want to use them. + */ + +#define JPEG_RST0 0xD0 /* RST0 marker code */ +#define JPEG_EOI 0xD9 /* EOI marker code */ +#define JPEG_APP0 0xE0 /* APP0 marker code */ +#define JPEG_COM 0xFE /* COM marker code */ + + +/* If we have a brain-damaged compiler that emits warnings (or worse, errors) + * for structure definitions that are never filled in, keep it quiet by + * supplying dummy definitions for the various substructures. + */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +struct jpeg_comp_master { long dummy; }; +struct jpeg_c_main_controller { long dummy; }; +struct jpeg_c_prep_controller { long dummy; }; +struct jpeg_c_coef_controller { long dummy; }; +struct jpeg_marker_writer { long dummy; }; +struct jpeg_color_converter { long dummy; }; +struct jpeg_downsampler { long dummy; }; +struct jpeg_forward_dct { long dummy; }; +struct jpeg_entropy_encoder { long dummy; }; +struct jpeg_decomp_master { long dummy; }; +struct jpeg_d_main_controller { long dummy; }; +struct jpeg_d_coef_controller { long dummy; }; +struct jpeg_d_post_controller { long dummy; }; +struct jpeg_input_controller { long dummy; }; +struct jpeg_marker_reader { long dummy; }; +struct jpeg_entropy_decoder { long dummy; }; +struct jpeg_inverse_dct { long dummy; }; +struct jpeg_upsampler { long dummy; }; +struct jpeg_color_deconverter { long dummy; }; +struct jpeg_color_quantizer { long dummy; }; +#endif /* JPEG_INTERNALS */ +#endif /* INCOMPLETE_TYPES_BROKEN */ + + +/* + * The JPEG library modules define JPEG_INTERNALS before including this file. + * The internal structure declarations are read only when that is true. + * Applications using the library should not include jpegint.h, but may wish + * to include jerror.h. + */ + +#ifdef JPEG_INTERNALS +#include "jpegint.h" /* fetch private declarations */ +#include "jerror.h" /* fetch error codes too */ +#endif + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +} +#endif +#endif + +#endif /* JPEGLIB_H */ diff --git a/src/SDL2/VisualC/external/include/png.h b/src/SDL2/VisualC/external/include/png.h new file mode 100755 index 000000000..0b5053fcf --- /dev/null +++ b/src/SDL2/VisualC/external/include/png.h @@ -0,0 +1,3304 @@ + +/* png.h - header file for PNG reference library + * + * libpng version 1.6.2 - April 25, 2013 + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license (See LICENSE, below) + * + * Authors and maintainers: + * libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat + * libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger + * libpng versions 0.97, January 1998, through 1.6.2 - April 25, 2013: Glenn + * See also "Contributing Authors", below. + * + * Note about libpng version numbers: + * + * Due to various miscommunications, unforeseen code incompatibilities + * and occasional factors outside the authors' control, version numbering + * on the library has not always been consistent and straightforward. + * The following table summarizes matters since version 0.89c, which was + * the first widely used release: + * + * source png.h png.h shared-lib + * version string int version + * ------- ------ ----- ---------- + * 0.89c "1.0 beta 3" 0.89 89 1.0.89 + * 0.90 "1.0 beta 4" 0.90 90 0.90 [should have been 2.0.90] + * 0.95 "1.0 beta 5" 0.95 95 0.95 [should have been 2.0.95] + * 0.96 "1.0 beta 6" 0.96 96 0.96 [should have been 2.0.96] + * 0.97b "1.00.97 beta 7" 1.00.97 97 1.0.1 [should have been 2.0.97] + * 0.97c 0.97 97 2.0.97 + * 0.98 0.98 98 2.0.98 + * 0.99 0.99 98 2.0.99 + * 0.99a-m 0.99 99 2.0.99 + * 1.00 1.00 100 2.1.0 [100 should be 10000] + * 1.0.0 (from here on, the 100 2.1.0 [100 should be 10000] + * 1.0.1 png.h string is 10001 2.1.0 + * 1.0.1a-e identical to the 10002 from here on, the shared library + * 1.0.2 source version) 10002 is 2.V where V is the source code + * 1.0.2a-b 10003 version, except as noted. + * 1.0.3 10003 + * 1.0.3a-d 10004 + * 1.0.4 10004 + * 1.0.4a-f 10005 + * 1.0.5 (+ 2 patches) 10005 + * 1.0.5a-d 10006 + * 1.0.5e-r 10100 (not source compatible) + * 1.0.5s-v 10006 (not binary compatible) + * 1.0.6 (+ 3 patches) 10006 (still binary incompatible) + * 1.0.6d-f 10007 (still binary incompatible) + * 1.0.6g 10007 + * 1.0.6h 10007 10.6h (testing xy.z so-numbering) + * 1.0.6i 10007 10.6i + * 1.0.6j 10007 2.1.0.6j (incompatible with 1.0.0) + * 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 (binary compatible) + * 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 (binary compatible) + * 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 (binary compatible) + * 1.0.7 1 10007 (still compatible) + * 1.0.8beta1-4 1 10008 2.1.0.8beta1-4 + * 1.0.8rc1 1 10008 2.1.0.8rc1 + * 1.0.8 1 10008 2.1.0.8 + * 1.0.9beta1-6 1 10009 2.1.0.9beta1-6 + * 1.0.9rc1 1 10009 2.1.0.9rc1 + * 1.0.9beta7-10 1 10009 2.1.0.9beta7-10 + * 1.0.9rc2 1 10009 2.1.0.9rc2 + * 1.0.9 1 10009 2.1.0.9 + * 1.0.10beta1 1 10010 2.1.0.10beta1 + * 1.0.10rc1 1 10010 2.1.0.10rc1 + * 1.0.10 1 10010 2.1.0.10 + * 1.0.11beta1-3 1 10011 2.1.0.11beta1-3 + * 1.0.11rc1 1 10011 2.1.0.11rc1 + * 1.0.11 1 10011 2.1.0.11 + * 1.0.12beta1-2 2 10012 2.1.0.12beta1-2 + * 1.0.12rc1 2 10012 2.1.0.12rc1 + * 1.0.12 2 10012 2.1.0.12 + * 1.1.0a-f - 10100 2.1.1.0a-f (branch abandoned) + * 1.2.0beta1-2 2 10200 2.1.2.0beta1-2 + * 1.2.0beta3-5 3 10200 3.1.2.0beta3-5 + * 1.2.0rc1 3 10200 3.1.2.0rc1 + * 1.2.0 3 10200 3.1.2.0 + * 1.2.1beta1-4 3 10201 3.1.2.1beta1-4 + * 1.2.1rc1-2 3 10201 3.1.2.1rc1-2 + * 1.2.1 3 10201 3.1.2.1 + * 1.2.2beta1-6 12 10202 12.so.0.1.2.2beta1-6 + * 1.0.13beta1 10 10013 10.so.0.1.0.13beta1 + * 1.0.13rc1 10 10013 10.so.0.1.0.13rc1 + * 1.2.2rc1 12 10202 12.so.0.1.2.2rc1 + * 1.0.13 10 10013 10.so.0.1.0.13 + * 1.2.2 12 10202 12.so.0.1.2.2 + * 1.2.3rc1-6 12 10203 12.so.0.1.2.3rc1-6 + * 1.2.3 12 10203 12.so.0.1.2.3 + * 1.2.4beta1-3 13 10204 12.so.0.1.2.4beta1-3 + * 1.0.14rc1 13 10014 10.so.0.1.0.14rc1 + * 1.2.4rc1 13 10204 12.so.0.1.2.4rc1 + * 1.0.14 10 10014 10.so.0.1.0.14 + * 1.2.4 13 10204 12.so.0.1.2.4 + * 1.2.5beta1-2 13 10205 12.so.0.1.2.5beta1-2 + * 1.0.15rc1-3 10 10015 10.so.0.1.0.15rc1-3 + * 1.2.5rc1-3 13 10205 12.so.0.1.2.5rc1-3 + * 1.0.15 10 10015 10.so.0.1.0.15 + * 1.2.5 13 10205 12.so.0.1.2.5 + * 1.2.6beta1-4 13 10206 12.so.0.1.2.6beta1-4 + * 1.0.16 10 10016 10.so.0.1.0.16 + * 1.2.6 13 10206 12.so.0.1.2.6 + * 1.2.7beta1-2 13 10207 12.so.0.1.2.7beta1-2 + * 1.0.17rc1 10 10017 12.so.0.1.0.17rc1 + * 1.2.7rc1 13 10207 12.so.0.1.2.7rc1 + * 1.0.17 10 10017 12.so.0.1.0.17 + * 1.2.7 13 10207 12.so.0.1.2.7 + * 1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5 + * 1.0.18rc1-5 10 10018 12.so.0.1.0.18rc1-5 + * 1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5 + * 1.0.18 10 10018 12.so.0.1.0.18 + * 1.2.8 13 10208 12.so.0.1.2.8 + * 1.2.9beta1-3 13 10209 12.so.0.1.2.9beta1-3 + * 1.2.9beta4-11 13 10209 12.so.0.9[.0] + * 1.2.9rc1 13 10209 12.so.0.9[.0] + * 1.2.9 13 10209 12.so.0.9[.0] + * 1.2.10beta1-7 13 10210 12.so.0.10[.0] + * 1.2.10rc1-2 13 10210 12.so.0.10[.0] + * 1.2.10 13 10210 12.so.0.10[.0] + * 1.4.0beta1-5 14 10400 14.so.0.0[.0] + * 1.2.11beta1-4 13 10211 12.so.0.11[.0] + * 1.4.0beta7-8 14 10400 14.so.0.0[.0] + * 1.2.11 13 10211 12.so.0.11[.0] + * 1.2.12 13 10212 12.so.0.12[.0] + * 1.4.0beta9-14 14 10400 14.so.0.0[.0] + * 1.2.13 13 10213 12.so.0.13[.0] + * 1.4.0beta15-36 14 10400 14.so.0.0[.0] + * 1.4.0beta37-87 14 10400 14.so.14.0[.0] + * 1.4.0rc01 14 10400 14.so.14.0[.0] + * 1.4.0beta88-109 14 10400 14.so.14.0[.0] + * 1.4.0rc02-08 14 10400 14.so.14.0[.0] + * 1.4.0 14 10400 14.so.14.0[.0] + * 1.4.1beta01-03 14 10401 14.so.14.1[.0] + * 1.4.1rc01 14 10401 14.so.14.1[.0] + * 1.4.1beta04-12 14 10401 14.so.14.1[.0] + * 1.4.1 14 10401 14.so.14.1[.0] + * 1.4.2 14 10402 14.so.14.2[.0] + * 1.4.3 14 10403 14.so.14.3[.0] + * 1.4.4 14 10404 14.so.14.4[.0] + * 1.5.0beta01-58 15 10500 15.so.15.0[.0] + * 1.5.0rc01-07 15 10500 15.so.15.0[.0] + * 1.5.0 15 10500 15.so.15.0[.0] + * 1.5.1beta01-11 15 10501 15.so.15.1[.0] + * 1.5.1rc01-02 15 10501 15.so.15.1[.0] + * 1.5.1 15 10501 15.so.15.1[.0] + * 1.5.2beta01-03 15 10502 15.so.15.2[.0] + * 1.5.2rc01-03 15 10502 15.so.15.2[.0] + * 1.5.2 15 10502 15.so.15.2[.0] + * 1.5.3beta01-10 15 10503 15.so.15.3[.0] + * 1.5.3rc01-02 15 10503 15.so.15.3[.0] + * 1.5.3beta11 15 10503 15.so.15.3[.0] + * 1.5.3 [omitted] + * 1.5.4beta01-08 15 10504 15.so.15.4[.0] + * 1.5.4rc01 15 10504 15.so.15.4[.0] + * 1.5.4 15 10504 15.so.15.4[.0] + * 1.5.5beta01-08 15 10505 15.so.15.5[.0] + * 1.5.5rc01 15 10505 15.so.15.5[.0] + * 1.5.5 15 10505 15.so.15.5[.0] + * 1.5.6beta01-07 15 10506 15.so.15.6[.0] + * 1.5.6rc01-03 15 10506 15.so.15.6[.0] + * 1.5.6 15 10506 15.so.15.6[.0] + * 1.5.7beta01-05 15 10507 15.so.15.7[.0] + * 1.5.7rc01-03 15 10507 15.so.15.7[.0] + * 1.5.7 15 10507 15.so.15.7[.0] + * 1.6.0beta01-40 16 10600 16.so.16.0[.0] + * 1.6.0rc01-08 16 10600 16.so.16.0[.0] + * 1.6.0 16 10600 16.so.16.0[.0] + * 1.6.1beta01-09 16 10601 16.so.16.1[.0] + * 1.6.1rc01 16 10601 16.so.16.1[.0] + * 1.6.1 16 10601 16.so.16.1[.0] + * 1.6.2beta01 16 10602 16.so.16.2[.0] + * 1.6.2rc01-06 16 10602 16.so.16.2[.0] + * 1.6.2 16 10602 16.so.16.2[.0] + * + * Henceforth the source version will match the shared-library major + * and minor numbers; the shared-library major version number will be + * used for changes in backward compatibility, as it is intended. The + * PNG_LIBPNG_VER macro, which is not used within libpng but is available + * for applications, is an unsigned integer of the form xyyzz corresponding + * to the source version x.y.z (leading zeros in y and z). Beta versions + * were given the previous public release number plus a letter, until + * version 1.0.6j; from then on they were given the upcoming public + * release number plus "betaNN" or "rcNN". + * + * Binary incompatibility exists only when applications make direct access + * to the info_ptr or png_ptr members through png.h, and the compiled + * application is loaded with a different version of the library. + * + * DLLNUM will change each time there are forward or backward changes + * in binary compatibility (e.g., when a new feature is added). + * + * See libpng-manual.txt or libpng.3 for more information. The PNG + * specification is available as a W3C Recommendation and as an ISO + * Specification, defines should NOT be changed. + */ +#define PNG_INFO_gAMA 0x0001 +#define PNG_INFO_sBIT 0x0002 +#define PNG_INFO_cHRM 0x0004 +#define PNG_INFO_PLTE 0x0008 +#define PNG_INFO_tRNS 0x0010 +#define PNG_INFO_bKGD 0x0020 +#define PNG_INFO_hIST 0x0040 +#define PNG_INFO_pHYs 0x0080 +#define PNG_INFO_oFFs 0x0100 +#define PNG_INFO_tIME 0x0200 +#define PNG_INFO_pCAL 0x0400 +#define PNG_INFO_sRGB 0x0800 /* GR-P, 0.96a */ +#define PNG_INFO_iCCP 0x1000 /* ESR, 1.0.6 */ +#define PNG_INFO_sPLT 0x2000 /* ESR, 1.0.6 */ +#define PNG_INFO_sCAL 0x4000 /* ESR, 1.0.6 */ +#define PNG_INFO_IDAT 0x8000 /* ESR, 1.0.6 */ + +/* This is used for the transformation routines, as some of them + * change these values for the row. It also should enable using + * the routines for other purposes. + */ +typedef struct png_row_info_struct +{ + png_uint_32 width; /* width of row */ + png_size_t rowbytes; /* number of bytes in row */ + png_byte color_type; /* color type of row */ + png_byte bit_depth; /* bit depth of row */ + png_byte channels; /* number of channels (1, 2, 3, or 4) */ + png_byte pixel_depth; /* bits per pixel (depth * channels) */ +} png_row_info; + +typedef png_row_info * png_row_infop; +typedef png_row_info * * png_row_infopp; + +/* These are the function types for the I/O functions and for the functions + * that allow the user to override the default I/O functions with his or her + * own. The png_error_ptr type should match that of user-supplied warning + * and error functions, while the png_rw_ptr type should match that of the + * user read/write data functions. Note that the 'write' function must not + * modify the buffer it is passed. The 'read' function, on the other hand, is + * expected to return the read data in the buffer. + */ +typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp)); +typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, png_size_t)); +typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp)); +typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32, + int)); +typedef PNG_CALLBACK(void, *png_write_status_ptr, (png_structp, png_uint_32, + int)); + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +typedef PNG_CALLBACK(void, *png_progressive_info_ptr, (png_structp, png_infop)); +typedef PNG_CALLBACK(void, *png_progressive_end_ptr, (png_structp, png_infop)); + +/* The following callback receives png_uint_32 row_number, int pass for the + * png_bytep data of the row. When transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +typedef PNG_CALLBACK(void, *png_progressive_row_ptr, (png_structp, png_bytep, + png_uint_32, int)); +#endif + +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ + defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) +typedef PNG_CALLBACK(void, *png_user_transform_ptr, (png_structp, png_row_infop, + png_bytep)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +typedef PNG_CALLBACK(int, *png_user_chunk_ptr, (png_structp, + png_unknown_chunkp)); +#endif +#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED +/* not used anywhere */ +/* typedef PNG_CALLBACK(void, *png_unknown_chunk_ptr, (png_structp)); */ +#endif + +#ifdef PNG_SETJMP_SUPPORTED +/* This must match the function definition in , and the application + * must include this before png.h to obtain the definition of jmp_buf. The + * function is required to be PNG_NORETURN, but this is not checked. If the + * function does return the application will crash via an abort() or similar + * system level call. + * + * If you get a warning here while building the library you may need to make + * changes to ensure that pnglibconf.h records the calling convention used by + * your compiler. This may be very difficult - try using a different compiler + * to build the library! + */ +PNG_FUNCTION(void, (PNGCAPI *png_longjmp_ptr), PNGARG((jmp_buf, int)), typedef); +#endif + +/* Transform masks for the high-level interface */ +#define PNG_TRANSFORM_IDENTITY 0x0000 /* read and write */ +#define PNG_TRANSFORM_STRIP_16 0x0001 /* read only */ +#define PNG_TRANSFORM_STRIP_ALPHA 0x0002 /* read only */ +#define PNG_TRANSFORM_PACKING 0x0004 /* read and write */ +#define PNG_TRANSFORM_PACKSWAP 0x0008 /* read and write */ +#define PNG_TRANSFORM_EXPAND 0x0010 /* read only */ +#define PNG_TRANSFORM_INVERT_MONO 0x0020 /* read and write */ +#define PNG_TRANSFORM_SHIFT 0x0040 /* read and write */ +#define PNG_TRANSFORM_BGR 0x0080 /* read and write */ +#define PNG_TRANSFORM_SWAP_ALPHA 0x0100 /* read and write */ +#define PNG_TRANSFORM_SWAP_ENDIAN 0x0200 /* read and write */ +#define PNG_TRANSFORM_INVERT_ALPHA 0x0400 /* read and write */ +#define PNG_TRANSFORM_STRIP_FILLER 0x0800 /* write only */ +/* Added to libpng-1.2.34 */ +#define PNG_TRANSFORM_STRIP_FILLER_BEFORE PNG_TRANSFORM_STRIP_FILLER +#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* write only */ +/* Added to libpng-1.4.0 */ +#define PNG_TRANSFORM_GRAY_TO_RGB 0x2000 /* read only */ +/* Added to libpng-1.5.4 */ +#define PNG_TRANSFORM_EXPAND_16 0x4000 /* read only */ +#define PNG_TRANSFORM_SCALE_16 0x8000 /* read only */ + +/* Flags for MNG supported features */ +#define PNG_FLAG_MNG_EMPTY_PLTE 0x01 +#define PNG_FLAG_MNG_FILTER_64 0x04 +#define PNG_ALL_MNG_FEATURES 0x05 + +/* NOTE: prior to 1.5 these functions had no 'API' style declaration, + * this allowed the zlib default functions to be used on Windows + * platforms. In 1.5 the zlib default malloc (which just calls malloc and + * ignores the first argument) should be completely compatible with the + * following. + */ +typedef PNG_CALLBACK(png_voidp, *png_malloc_ptr, (png_structp, + png_alloc_size_t)); +typedef PNG_CALLBACK(void, *png_free_ptr, (png_structp, png_voidp)); + +/* Section 3: exported functions + * Here are the function definitions most commonly used. This is not + * the place to find out how to use libpng. See libpng-manual.txt for the + * full explanation, see example.c for the summary. This just provides + * a simple one line description of the use of each function. + * + * The PNG_EXPORT() and PNG_EXPORTA() macros used below are defined in + * pngconf.h and in the *.dfn files in the scripts directory. + * + * PNG_EXPORT(ordinal, type, name, (args)); + * + * ordinal: ordinal that is used while building + * *.def files. The ordinal value is only + * relevant when preprocessing png.h with + * the *.dfn files for building symbol table + * entries, and are removed by pngconf.h. + * type: return type of the function + * name: function name + * args: function arguments, with types + * + * When we wish to append attributes to a function prototype we use + * the PNG_EXPORTA() macro instead. + * + * PNG_EXPORTA(ordinal, type, name, (args), attributes); + * + * ordinal, type, name, and args: same as in PNG_EXPORT(). + * attributes: function attributes + */ + +/* Returns the version number of the library */ +PNG_EXPORT(1, png_uint_32, png_access_version_number, (void)); + +/* Tell lib we have already handled the first magic bytes. + * Handling more than 8 bytes from the beginning of the file is an error. + */ +PNG_EXPORT(2, void, png_set_sig_bytes, (png_structrp png_ptr, int num_bytes)); + +/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a + * PNG file. Returns zero if the supplied bytes match the 8-byte PNG + * signature, and non-zero otherwise. Having num_to_check == 0 or + * start > 7 will always fail (ie return non-zero). + */ +PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, png_size_t start, + png_size_t num_to_check)); + +/* Simple signature checking function. This is the same as calling + * png_check_sig(sig, n) := !png_sig_cmp(sig, 0, n). + */ +#define png_check_sig(sig, n) !png_sig_cmp((sig), 0, (n)) + +/* Allocate and initialize png_ptr struct for reading, and any other memory. */ +PNG_EXPORTA(4, png_structp, png_create_read_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn), + PNG_ALLOCATED); + +/* Allocate and initialize png_ptr struct for writing, and any other memory */ +PNG_EXPORTA(5, png_structp, png_create_write_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn), + PNG_ALLOCATED); + +PNG_EXPORT(6, png_size_t, png_get_compression_buffer_size, + (png_const_structrp png_ptr)); + +PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structrp png_ptr, + png_size_t size)); + +/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp + * match up. + */ +#ifdef PNG_SETJMP_SUPPORTED +/* This function returns the jmp_buf built in to *png_ptr. It must be + * supplied with an appropriate 'longjmp' function to use on that jmp_buf + * unless the default error function is overridden in which case NULL is + * acceptable. The size of the jmp_buf is checked against the actual size + * allocated by the library - the call will return NULL on a mismatch + * indicating an ABI mismatch. + */ +PNG_EXPORT(8, jmp_buf*, png_set_longjmp_fn, (png_structrp png_ptr, + png_longjmp_ptr longjmp_fn, size_t jmp_buf_size)); +# define png_jmpbuf(png_ptr) \ + (*png_set_longjmp_fn((png_ptr), longjmp, (sizeof (jmp_buf)))) +#else +# define png_jmpbuf(png_ptr) \ + (LIBPNG_WAS_COMPILED_WITH__PNG_NO_SETJMP) +#endif +/* This function should be used by libpng applications in place of + * longjmp(png_ptr->jmpbuf, val). If longjmp_fn() has been set, it + * will use it; otherwise it will call PNG_ABORT(). This function was + * added in libpng-1.5.0. + */ +PNG_EXPORTA(9, void, png_longjmp, (png_const_structrp png_ptr, int val), + PNG_NORETURN); + +#ifdef PNG_READ_SUPPORTED +/* Reset the compression stream */ +PNG_EXPORTA(10, int, png_reset_zstream, (png_structrp png_ptr), PNG_DEPRECATED); +#endif + +/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */ +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(11, png_structp, png_create_read_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +PNG_EXPORTA(12, png_structp, png_create_write_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +#endif + +/* Write the PNG file signature. */ +PNG_EXPORT(13, void, png_write_sig, (png_structrp png_ptr)); + +/* Write a PNG chunk - size, type, (optional) data, CRC. */ +PNG_EXPORT(14, void, png_write_chunk, (png_structrp png_ptr, png_const_bytep + chunk_name, png_const_bytep data, png_size_t length)); + +/* Write the start of a PNG chunk - length and chunk name. */ +PNG_EXPORT(15, void, png_write_chunk_start, (png_structrp png_ptr, + png_const_bytep chunk_name, png_uint_32 length)); + +/* Write the data of a PNG chunk started with png_write_chunk_start(). */ +PNG_EXPORT(16, void, png_write_chunk_data, (png_structrp png_ptr, + png_const_bytep data, png_size_t length)); + +/* Finish a chunk started with png_write_chunk_start() (includes CRC). */ +PNG_EXPORT(17, void, png_write_chunk_end, (png_structrp png_ptr)); + +/* Allocate and initialize the info structure */ +PNG_EXPORTA(18, png_infop, png_create_info_struct, (png_const_structrp png_ptr), + PNG_ALLOCATED); + +/* DEPRECATED: this function allowed init structures to be created using the + * default allocation method (typically malloc). Use is deprecated in 1.6.0 and + * the API will be removed in the future. + */ +PNG_EXPORTA(19, void, png_info_init_3, (png_infopp info_ptr, + png_size_t png_info_struct_size), PNG_DEPRECATED); + +/* Writes all the PNG information before the image. */ +PNG_EXPORT(20, void, png_write_info_before_PLTE, + (png_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(21, void, png_write_info, + (png_structrp png_ptr, png_const_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the information before the actual image data. */ +PNG_EXPORT(22, void, png_read_info, + (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +#ifdef PNG_TIME_RFC1123_SUPPORTED + /* Convert to a US string format: there is no localization support in this + * routine. The original implementation used a 29 character buffer in + * png_struct, this will be removed in future versions. + */ +#if PNG_LIBPNG_VER < 10700 +/* To do: remove this from libpng17 (and from libpng17/png.c and pngstruct.h) */ +PNG_EXPORTA(23, png_const_charp, png_convert_to_rfc1123, (png_structrp png_ptr, + png_const_timep ptime),PNG_DEPRECATED); +#endif +PNG_EXPORT(241, int, png_convert_to_rfc1123_buffer, (char out[29], + png_const_timep ptime)); +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED +/* Convert from a struct tm to png_time */ +PNG_EXPORT(24, void, png_convert_from_struct_tm, (png_timep ptime, + const struct tm * ttime)); + +/* Convert from time_t to png_time. Uses gmtime() */ +PNG_EXPORT(25, void, png_convert_from_time_t, (png_timep ptime, time_t ttime)); +#endif /* PNG_CONVERT_tIME_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */ +PNG_EXPORT(26, void, png_set_expand, (png_structrp png_ptr)); +PNG_EXPORT(27, void, png_set_expand_gray_1_2_4_to_8, (png_structrp png_ptr)); +PNG_EXPORT(28, void, png_set_palette_to_rgb, (png_structrp png_ptr)); +PNG_EXPORT(29, void, png_set_tRNS_to_alpha, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* Expand to 16-bit channels, forces conversion of palette to RGB and expansion + * of a tRNS chunk if present. + */ +PNG_EXPORT(221, void, png_set_expand_16, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) +/* Use blue, green, red order for pixels. */ +PNG_EXPORT(30, void, png_set_bgr, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +/* Expand the grayscale to 24-bit RGB if necessary. */ +PNG_EXPORT(31, void, png_set_gray_to_rgb, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +/* Reduce RGB to grayscale. */ +#define PNG_ERROR_ACTION_NONE 1 +#define PNG_ERROR_ACTION_WARN 2 +#define PNG_ERROR_ACTION_ERROR 3 +#define PNG_RGB_TO_GRAY_DEFAULT (-1)/*for red/green coefficients*/ + +PNG_FP_EXPORT(32, void, png_set_rgb_to_gray, (png_structrp png_ptr, + int error_action, double red, double green)) +PNG_FIXED_EXPORT(33, void, png_set_rgb_to_gray_fixed, (png_structrp png_ptr, + int error_action, png_fixed_point red, png_fixed_point green)) + +PNG_EXPORT(34, png_byte, png_get_rgb_to_gray_status, (png_const_structrp + png_ptr)); +#endif + +#ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +PNG_EXPORT(35, void, png_build_grayscale_palette, (int bit_depth, + png_colorp palette)); +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED +/* How the alpha channel is interpreted - this affects how the color channels of + * a PNG file are returned when an alpha channel, or tRNS chunk in a palette + * file, is present. + * + * This has no effect on the way pixels are written into a PNG output + * datastream. The color samples in a PNG datastream are never premultiplied + * with the alpha samples. + * + * The default is to return data according to the PNG specification: the alpha + * channel is a linear measure of the contribution of the pixel to the + * corresponding composited pixel. The gamma encoded color channels must be + * scaled according to the contribution and to do this it is necessary to undo + * the encoding, scale the color values, perform the composition and reencode + * the values. This is the 'PNG' mode. + * + * The alternative is to 'associate' the alpha with the color information by + * storing color channel values that have been scaled by the alpha. The + * advantage is that the color channels can be resampled (the image can be + * scaled) in this form. The disadvantage is that normal practice is to store + * linear, not (gamma) encoded, values and this requires 16-bit channels for + * still images rather than the 8-bit channels that are just about sufficient if + * gamma encoding is used. In addition all non-transparent pixel values, + * including completely opaque ones, must be gamma encoded to produce the final + * image. This is the 'STANDARD', 'ASSOCIATED' or 'PREMULTIPLIED' mode (the + * latter being the two common names for associated alpha color channels.) + * + * Since it is not necessary to perform arithmetic on opaque color values so + * long as they are not to be resampled and are in the final color space it is + * possible to optimize the handling of alpha by storing the opaque pixels in + * the PNG format (adjusted for the output color space) while storing partially + * opaque pixels in the standard, linear, format. The accuracy required for + * standard alpha composition is relatively low, because the pixels are + * isolated, therefore typically the accuracy loss in storing 8-bit linear + * values is acceptable. (This is not true if the alpha channel is used to + * simulate transparency over large areas - use 16 bits or the PNG mode in + * this case!) This is the 'OPTIMIZED' mode. For this mode a pixel is + * treated as opaque only if the alpha value is equal to the maximum value. + * + * The final choice is to gamma encode the alpha channel as well. This is + * broken because, in practice, no implementation that uses this choice + * correctly undoes the encoding before handling alpha composition. Use this + * choice only if other serious errors in the software or hardware you use + * mandate it; the typical serious error is for dark halos to appear around + * opaque areas of the composited PNG image because of arithmetic overflow. + * + * The API function png_set_alpha_mode specifies which of these choices to use + * with an enumerated 'mode' value and the gamma of the required output: + */ +#define PNG_ALPHA_PNG 0 /* according to the PNG standard */ +#define PNG_ALPHA_STANDARD 1 /* according to Porter/Duff */ +#define PNG_ALPHA_ASSOCIATED 1 /* as above; this is the normal practice */ +#define PNG_ALPHA_PREMULTIPLIED 1 /* as above */ +#define PNG_ALPHA_OPTIMIZED 2 /* 'PNG' for opaque pixels, else 'STANDARD' */ +#define PNG_ALPHA_BROKEN 3 /* the alpha channel is gamma encoded */ + +PNG_FP_EXPORT(227, void, png_set_alpha_mode, (png_structrp png_ptr, int mode, + double output_gamma)) +PNG_FIXED_EXPORT(228, void, png_set_alpha_mode_fixed, (png_structrp png_ptr, + int mode, png_fixed_point output_gamma)) +#endif + +#if defined(PNG_GAMMA_SUPPORTED) || defined(PNG_READ_ALPHA_MODE_SUPPORTED) +/* The output_gamma value is a screen gamma in libpng terminology: it expresses + * how to decode the output values, not how they are encoded. The values used + * correspond to the normal numbers used to describe the overall gamma of a + * computer display system; for example 2.2 for an sRGB conformant system. The + * values are scaled by 100000 in the _fixed version of the API (so 220000 for + * sRGB.) + * + * The inverse of the value is always used to provide a default for the PNG file + * encoding if it has no gAMA chunk and if png_set_gamma() has not been called + * to override the PNG gamma information. + * + * When the ALPHA_OPTIMIZED mode is selected the output gamma is used to encode + * opaque pixels however pixels with lower alpha values are not encoded, + * regardless of the output gamma setting. + * + * When the standard Porter Duff handling is requested with mode 1 the output + * encoding is set to be linear and the output_gamma value is only relevant + * as a default for input data that has no gamma information. The linear output + * encoding will be overridden if png_set_gamma() is called - the results may be + * highly unexpected! + * + * The following numbers are derived from the sRGB standard and the research + * behind it. sRGB is defined to be approximated by a PNG gAMA chunk value of + * 0.45455 (1/2.2) for PNG. The value implicitly includes any viewing + * correction required to take account of any differences in the color + * environment of the original scene and the intended display environment; the + * value expresses how to *decode* the image for display, not how the original + * data was *encoded*. + * + * sRGB provides a peg for the PNG standard by defining a viewing environment. + * sRGB itself, and earlier TV standards, actually use a more complex transform + * (a linear portion then a gamma 2.4 power law) than PNG can express. (PNG is + * limited to simple power laws.) By saying that an image for direct display on + * an sRGB conformant system should be stored with a gAMA chunk value of 45455 + * (11.3.3.2 and 11.3.3.5 of the ISO PNG specification) the PNG specification + * makes it possible to derive values for other display systems and + * environments. + * + * The Mac value is deduced from the sRGB based on an assumption that the actual + * extra viewing correction used in early Mac display systems was implemented as + * a power 1.45 lookup table. + * + * Any system where a programmable lookup table is used or where the behavior of + * the final display device characteristics can be changed requires system + * specific code to obtain the current characteristic. However this can be + * difficult and most PNG gamma correction only requires an approximate value. + * + * By default, if png_set_alpha_mode() is not called, libpng assumes that all + * values are unencoded, linear, values and that the output device also has a + * linear characteristic. This is only very rarely correct - it is invariably + * better to call png_set_alpha_mode() with PNG_DEFAULT_sRGB than rely on the + * default if you don't know what the right answer is! + * + * The special value PNG_GAMMA_MAC_18 indicates an older Mac system (pre Mac OS + * 10.6) which used a correction table to implement a somewhat lower gamma on an + * otherwise sRGB system. + * + * Both these values are reserved (not simple gamma values) in order to allow + * more precise correction internally in the future. + * + * NOTE: the following values can be passed to either the fixed or floating + * point APIs, but the floating point API will also accept floating point + * values. + */ +#define PNG_DEFAULT_sRGB -1 /* sRGB gamma and color space */ +#define PNG_GAMMA_MAC_18 -2 /* Old Mac '1.8' gamma and color space */ +#define PNG_GAMMA_sRGB 220000 /* Television standards--matches sRGB gamma */ +#define PNG_GAMMA_LINEAR PNG_FP_1 /* Linear */ +#endif + +/* The following are examples of calls to png_set_alpha_mode to achieve the + * required overall gamma correction and, where necessary, alpha + * premultiplication. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * This is the default libpng handling of the alpha channel - it is not + * pre-multiplied into the color components. In addition the call states + * that the output is for a sRGB system and causes all PNG files without gAMA + * chunks to be assumed to be encoded using sRGB. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * In this case the output is assumed to be something like an sRGB conformant + * display preceeded by a power-law lookup table of power 1.45. This is how + * early Mac systems behaved. + * + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR); + * This is the classic Jim Blinn approach and will work in academic + * environments where everything is done by the book. It has the shortcoming + * of assuming that input PNG data with no gamma information is linear - this + * is unlikely to be correct unless the PNG files where generated locally. + * Most of the time the output precision will be so low as to show + * significant banding in dark areas of the image. + * + * png_set_expand_16(pp); + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_DEFAULT_sRGB); + * This is a somewhat more realistic Jim Blinn inspired approach. PNG files + * are assumed to have the sRGB encoding if not marked with a gamma value and + * the output is always 16 bits per component. This permits accurate scaling + * and processing of the data. If you know that your input PNG files were + * generated locally you might need to replace PNG_DEFAULT_sRGB with the + * correct value for your system. + * + * png_set_alpha_mode(pp, PNG_ALPHA_OPTIMIZED, PNG_DEFAULT_sRGB); + * If you just need to composite the PNG image onto an existing background + * and if you control the code that does this you can use the optimization + * setting. In this case you just copy completely opaque pixels to the + * output. For pixels that are not completely transparent (you just skip + * those) you do the composition math using png_composite or png_composite_16 + * below then encode the resultant 8-bit or 16-bit values to match the output + * encoding. + * + * Other cases + * If neither the PNG nor the standard linear encoding work for you because + * of the software or hardware you use then you have a big problem. The PNG + * case will probably result in halos around the image. The linear encoding + * will probably result in a washed out, too bright, image (it's actually too + * contrasty.) Try the ALPHA_OPTIMIZED mode above - this will probably + * substantially reduce the halos. Alternatively try: + * + * png_set_alpha_mode(pp, PNG_ALPHA_BROKEN, PNG_DEFAULT_sRGB); + * This option will also reduce the halos, but there will be slight dark + * halos round the opaque parts of the image where the background is light. + * In the OPTIMIZED mode the halos will be light halos where the background + * is dark. Take your pick - the halos are unavoidable unless you can get + * your hardware/software fixed! (The OPTIMIZED approach is slightly + * faster.) + * + * When the default gamma of PNG files doesn't match the output gamma. + * If you have PNG files with no gamma information png_set_alpha_mode allows + * you to provide a default gamma, but it also sets the ouput gamma to the + * matching value. If you know your PNG files have a gamma that doesn't + * match the output you can take advantage of the fact that + * png_set_alpha_mode always sets the output gamma but only sets the PNG + * default if it is not already set: + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * The first call sets both the default and the output gamma values, the + * second call overrides the output gamma without changing the default. This + * is easier than achieving the same effect with png_set_gamma. You must use + * PNG_ALPHA_PNG for the first call - internal checking in png_set_alpha will + * fire if more than one call to png_set_alpha_mode and png_set_background is + * made in the same read operation, however multiple calls with PNG_ALPHA_PNG + * are ignored. + */ + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED +PNG_EXPORT(36, void, png_set_strip_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED) +PNG_EXPORT(37, void, png_set_swap_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED) +PNG_EXPORT(38, void, png_set_invert_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) +/* Add a filler byte to 8-bit Gray or 24-bit RGB images. */ +PNG_EXPORT(39, void, png_set_filler, (png_structrp png_ptr, png_uint_32 filler, + int flags)); +/* The values of the PNG_FILLER_ defines should NOT be changed */ +# define PNG_FILLER_BEFORE 0 +# define PNG_FILLER_AFTER 1 +/* Add an alpha byte to 8-bit Gray or 24-bit RGB images. */ +PNG_EXPORT(40, void, png_set_add_alpha, (png_structrp png_ptr, + png_uint_32 filler, int flags)); +#endif /* PNG_READ_FILLER_SUPPORTED || PNG_WRITE_FILLER_SUPPORTED */ + +#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) +/* Swap bytes in 16-bit depth files. */ +PNG_EXPORT(41, void, png_set_swap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED) +/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */ +PNG_EXPORT(42, void, png_set_packing, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \ + defined(PNG_WRITE_PACKSWAP_SUPPORTED) +/* Swap packing order of pixels in bytes. */ +PNG_EXPORT(43, void, png_set_packswap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) +/* Converts files to legal bit depths. */ +PNG_EXPORT(44, void, png_set_shift, (png_structrp png_ptr, png_const_color_8p + true_bits)); +#endif + +#if defined(PNG_READ_INTERLACING_SUPPORTED) || \ + defined(PNG_WRITE_INTERLACING_SUPPORTED) +/* Have the code handle the interlacing. Returns the number of passes. + * MUST be called before png_read_update_info or png_start_read_image, + * otherwise it will not have the desired effect. Note that it is still + * necessary to call png_read_row or png_read_rows png_get_image_height + * times for each pass. +*/ +PNG_EXPORT(45, int, png_set_interlace_handling, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) +/* Invert monochrome files */ +PNG_EXPORT(46, void, png_set_invert_mono, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +/* Handle alpha and tRNS by replacing with a background color. Prior to + * libpng-1.5.4 this API must not be called before the PNG file header has been + * read. Doing so will result in unexpected behavior and possible warnings or + * errors if the PNG file contains a bKGD chunk. + */ +PNG_FP_EXPORT(47, void, png_set_background, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, double background_gamma)) +PNG_FIXED_EXPORT(215, void, png_set_background_fixed, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, png_fixed_point background_gamma)) +#endif +#ifdef PNG_READ_BACKGROUND_SUPPORTED +# define PNG_BACKGROUND_GAMMA_UNKNOWN 0 +# define PNG_BACKGROUND_GAMMA_SCREEN 1 +# define PNG_BACKGROUND_GAMMA_FILE 2 +# define PNG_BACKGROUND_GAMMA_UNIQUE 3 +#endif + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED +/* Scale a 16-bit depth file down to 8-bit, accurately. */ +PNG_EXPORT(229, void, png_set_scale_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_16_TO_8 SUPPORTED /* Name prior to 1.5.4 */ +/* Strip the second byte of information from a 16-bit depth file. */ +PNG_EXPORT(48, void, png_set_strip_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +/* Turn on quantizing, and reduce the palette to the number of colors + * available. + */ +PNG_EXPORT(49, void, png_set_quantize, (png_structrp png_ptr, + png_colorp palette, int num_palette, int maximum_colors, + png_const_uint_16p histogram, int full_quantize)); +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* The threshold on gamma processing is configurable but hard-wired into the + * library. The following is the floating point variant. + */ +#define PNG_GAMMA_THRESHOLD (PNG_GAMMA_THRESHOLD_FIXED*.00001) + +/* Handle gamma correction. Screen_gamma=(display_exponent). + * NOTE: this API simply sets the screen and file gamma values. It will + * therefore override the value for gamma in a PNG file if it is called after + * the file header has been read - use with care - call before reading the PNG + * file for best results! + * + * These routines accept the same gamma values as png_set_alpha_mode (described + * above). The PNG_GAMMA_ defines and PNG_DEFAULT_sRGB can be passed to either + * API (floating point or fixed.) Notice, however, that the 'file_gamma' value + * is the inverse of a 'screen gamma' value. + */ +PNG_FP_EXPORT(50, void, png_set_gamma, (png_structrp png_ptr, + double screen_gamma, double override_file_gamma)) +PNG_FIXED_EXPORT(208, void, png_set_gamma_fixed, (png_structrp png_ptr, + png_fixed_point screen_gamma, png_fixed_point override_file_gamma)) +#endif + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +/* Set how many lines between output flushes - 0 for no flushing */ +PNG_EXPORT(51, void, png_set_flush, (png_structrp png_ptr, int nrows)); +/* Flush the current PNG output buffer */ +PNG_EXPORT(52, void, png_write_flush, (png_structrp png_ptr)); +#endif + +/* Optional update palette with requested transformations */ +PNG_EXPORT(53, void, png_start_read_image, (png_structrp png_ptr)); + +/* Optional call to update the users info structure */ +PNG_EXPORT(54, void, png_read_update_info, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read one or more rows of image data. */ +PNG_EXPORT(55, void, png_read_rows, (png_structrp png_ptr, png_bytepp row, + png_bytepp display_row, png_uint_32 num_rows)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read a row of data. */ +PNG_EXPORT(56, void, png_read_row, (png_structrp png_ptr, png_bytep row, + png_bytep display_row)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the whole image into memory at once. */ +PNG_EXPORT(57, void, png_read_image, (png_structrp png_ptr, png_bytepp image)); +#endif + +/* Write a row of image data */ +PNG_EXPORT(58, void, png_write_row, (png_structrp png_ptr, + png_const_bytep row)); + +/* Write a few rows of image data: (*row) is not written; however, the type + * is declared as writeable to maintain compatibility with previous versions + * of libpng and to allow the 'display_row' array from read_rows to be passed + * unchanged to write_rows. + */ +PNG_EXPORT(59, void, png_write_rows, (png_structrp png_ptr, png_bytepp row, + png_uint_32 num_rows)); + +/* Write the image data */ +PNG_EXPORT(60, void, png_write_image, (png_structrp png_ptr, png_bytepp image)); + +/* Write the end of the PNG file. */ +PNG_EXPORT(61, void, png_write_end, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the end of the PNG file. */ +PNG_EXPORT(62, void, png_read_end, (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +/* Free any memory associated with the png_info_struct */ +PNG_EXPORT(63, void, png_destroy_info_struct, (png_const_structrp png_ptr, + png_infopp info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(64, void, png_destroy_read_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(65, void, png_destroy_write_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr)); + +/* Set the libpng method of handling chunk CRC errors */ +PNG_EXPORT(66, void, png_set_crc_action, (png_structrp png_ptr, int crit_action, + int ancil_action)); + +/* Values for png_set_crc_action() say how to handle CRC errors in + * ancillary and critical chunks, and whether to use the data contained + * therein. Note that it is impossible to "discard" data in a critical + * chunk. For versions prior to 0.90, the action was always error/quit, + * whereas in version 0.90 and later, the action for CRC errors in ancillary + * chunks is warn/discard. These values should NOT be changed. + * + * value action:critical action:ancillary + */ +#define PNG_CRC_DEFAULT 0 /* error/quit warn/discard data */ +#define PNG_CRC_ERROR_QUIT 1 /* error/quit error/quit */ +#define PNG_CRC_WARN_DISCARD 2 /* (INVALID) warn/discard data */ +#define PNG_CRC_WARN_USE 3 /* warn/use data warn/use data */ +#define PNG_CRC_QUIET_USE 4 /* quiet/use data quiet/use data */ +#define PNG_CRC_NO_CHANGE 5 /* use current value use current value */ + +/* These functions give the user control over the scan-line filtering in + * libpng and the compression methods used by zlib. These functions are + * mainly useful for testing, as the defaults should work with most users. + * Those users who are tight on memory or want faster performance at the + * expense of compression can modify them. See the compression library + * header file (zlib.h) for an explination of the compression functions. + */ + +/* Set the filtering method(s) used by libpng. Currently, the only valid + * value for "method" is 0. + */ +PNG_EXPORT(67, void, png_set_filter, (png_structrp png_ptr, int method, + int filters)); + +/* Flags for png_set_filter() to say which filters to use. The flags + * are chosen so that they don't conflict with real filter types + * below, in case they are supplied instead of the #defined constants. + * These values should NOT be changed. + */ +#define PNG_NO_FILTERS 0x00 +#define PNG_FILTER_NONE 0x08 +#define PNG_FILTER_SUB 0x10 +#define PNG_FILTER_UP 0x20 +#define PNG_FILTER_AVG 0x40 +#define PNG_FILTER_PAETH 0x80 +#define PNG_ALL_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP | \ + PNG_FILTER_AVG | PNG_FILTER_PAETH) + +/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now. + * These defines should NOT be changed. + */ +#define PNG_FILTER_VALUE_NONE 0 +#define PNG_FILTER_VALUE_SUB 1 +#define PNG_FILTER_VALUE_UP 2 +#define PNG_FILTER_VALUE_AVG 3 +#define PNG_FILTER_VALUE_PAETH 4 +#define PNG_FILTER_VALUE_LAST 5 + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* EXPERIMENTAL */ +/* The "heuristic_method" is given by one of the PNG_FILTER_HEURISTIC_ + * defines, either the default (minimum-sum-of-absolute-differences), or + * the experimental method (weighted-minimum-sum-of-absolute-differences). + * + * Weights are factors >= 1.0, indicating how important it is to keep the + * filter type consistent between rows. Larger numbers mean the current + * filter is that many times as likely to be the same as the "num_weights" + * previous filters. This is cumulative for each previous row with a weight. + * There needs to be "num_weights" values in "filter_weights", or it can be + * NULL if the weights aren't being specified. Weights have no influence on + * the selection of the first row filter. Well chosen weights can (in theory) + * improve the compression for a given image. + * + * Costs are factors >= 1.0 indicating the relative decoding costs of a + * filter type. Higher costs indicate more decoding expense, and are + * therefore less likely to be selected over a filter with lower computational + * costs. There needs to be a value in "filter_costs" for each valid filter + * type (given by PNG_FILTER_VALUE_LAST), or it can be NULL if you aren't + * setting the costs. Costs try to improve the speed of decompression without + * unduly increasing the compressed image size. + * + * A negative weight or cost indicates the default value is to be used, and + * values in the range [0.0, 1.0) indicate the value is to remain unchanged. + * The default values for both weights and costs are currently 1.0, but may + * change if good general weighting/cost heuristics can be found. If both + * the weights and costs are set to 1.0, this degenerates the WEIGHTED method + * to the UNWEIGHTED method, but with added encoding time/computation. + */ +PNG_FP_EXPORT(68, void, png_set_filter_heuristics, (png_structrp png_ptr, + int heuristic_method, int num_weights, png_const_doublep filter_weights, + png_const_doublep filter_costs)) +PNG_FIXED_EXPORT(209, void, png_set_filter_heuristics_fixed, + (png_structrp png_ptr, int heuristic_method, int num_weights, + png_const_fixed_point_p filter_weights, + png_const_fixed_point_p filter_costs)) +#endif /* PNG_WRITE_WEIGHTED_FILTER_SUPPORTED */ + +/* Heuristic used for row filter selection. These defines should NOT be + * changed. + */ +#define PNG_FILTER_HEURISTIC_DEFAULT 0 /* Currently "UNWEIGHTED" */ +#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1 /* Used by libpng < 0.95 */ +#define PNG_FILTER_HEURISTIC_WEIGHTED 2 /* Experimental feature */ +#define PNG_FILTER_HEURISTIC_LAST 3 /* Not a valid value */ + +#ifdef PNG_WRITE_SUPPORTED +/* Set the library compression level. Currently, valid values range from + * 0 - 9, corresponding directly to the zlib compression levels 0 - 9 + * (0 - no compression, 9 - "maximal" compression). Note that tests have + * shown that zlib compression levels 3-6 usually perform as well as level 9 + * for PNG images, and do considerably fewer caclulations. In the future, + * these values may not correspond directly to the zlib compression levels. + */ +PNG_EXPORT(69, void, png_set_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(70, void, png_set_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(71, void, png_set_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(72, void, png_set_compression_window_bits, (png_structrp png_ptr, + int window_bits)); + +PNG_EXPORT(73, void, png_set_compression_method, (png_structrp png_ptr, + int method)); +#endif + +#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +/* Also set zlib parameters for compressing non-IDAT chunks */ +PNG_EXPORT(222, void, png_set_text_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(223, void, png_set_text_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(224, void, png_set_text_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(225, void, png_set_text_compression_window_bits, + (png_structrp png_ptr, int window_bits)); + +PNG_EXPORT(226, void, png_set_text_compression_method, (png_structrp png_ptr, + int method)); +#endif /* PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED */ + +/* These next functions are called for input/output, memory, and error + * handling. They are in the file pngrio.c, pngwio.c, and pngerror.c, + * and call standard C I/O routines such as fread(), fwrite(), and + * fprintf(). These functions can be made to use other I/O routines + * at run time for those applications that need to handle I/O in a + * different manner by calling png_set_???_fn(). See libpng-manual.txt for + * more information. + */ + +#ifdef PNG_STDIO_SUPPORTED +/* Initialize the input/output for the PNG file to the default functions. */ +PNG_EXPORT(74, void, png_init_io, (png_structrp png_ptr, png_FILE_p fp)); +#endif + +/* Replace the (error and abort), and warning functions with user + * supplied functions. If no messages are to be printed you must still + * write and use replacement functions. The replacement error_fn should + * still do a longjmp to the last setjmp location if you are using this + * method of error handling. If error_fn or warning_fn is NULL, the + * default function will be used. + */ + +PNG_EXPORT(75, void, png_set_error_fn, (png_structrp png_ptr, + png_voidp error_ptr, png_error_ptr error_fn, png_error_ptr warning_fn)); + +/* Return the user pointer associated with the error functions */ +PNG_EXPORT(76, png_voidp, png_get_error_ptr, (png_const_structrp png_ptr)); + +/* Replace the default data output functions with a user supplied one(s). + * If buffered output is not used, then output_flush_fn can be set to NULL. + * If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time + * output_flush_fn will be ignored (and thus can be NULL). + * It is probably a mistake to use NULL for output_flush_fn if + * write_data_fn is not also NULL unless you have built libpng with + * PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's + * default flush function, which uses the standard *FILE structure, will + * be used. + */ +PNG_EXPORT(77, void, png_set_write_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn)); + +/* Replace the default data input function with a user supplied one. */ +PNG_EXPORT(78, void, png_set_read_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr read_data_fn)); + +/* Return the user pointer associated with the I/O functions */ +PNG_EXPORT(79, png_voidp, png_get_io_ptr, (png_const_structrp png_ptr)); + +PNG_EXPORT(80, void, png_set_read_status_fn, (png_structrp png_ptr, + png_read_status_ptr read_row_fn)); + +PNG_EXPORT(81, void, png_set_write_status_fn, (png_structrp png_ptr, + png_write_status_ptr write_row_fn)); + +#ifdef PNG_USER_MEM_SUPPORTED +/* Replace the default memory allocation functions with user supplied one(s). */ +PNG_EXPORT(82, void, png_set_mem_fn, (png_structrp png_ptr, png_voidp mem_ptr, + png_malloc_ptr malloc_fn, png_free_ptr free_fn)); +/* Return the user pointer associated with the memory functions */ +PNG_EXPORT(83, png_voidp, png_get_mem_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(84, void, png_set_read_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr read_user_transform_fn)); +#endif + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(85, void, png_set_write_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr write_user_transform_fn)); +#endif + +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED +PNG_EXPORT(86, void, png_set_user_transform_info, (png_structrp png_ptr, + png_voidp user_transform_ptr, int user_transform_depth, + int user_transform_channels)); +/* Return the user pointer associated with the user transform functions */ +PNG_EXPORT(87, png_voidp, png_get_user_transform_ptr, + (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED +/* Return information about the row currently being processed. Note that these + * APIs do not fail but will return unexpected results if called outside a user + * transform callback. Also note that when transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +PNG_EXPORT(217, png_uint_32, png_get_current_row_number, (png_const_structrp)); +PNG_EXPORT(218, png_byte, png_get_current_pass_number, (png_const_structrp)); +#endif + +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED +/* This callback is called only for *unknown* chunks. If + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED is set then it is possible to set known + * chunks to be treated as unknown, however in this case the callback must do + * any processing required by the chunk (e.g. by calling the appropriate + * png_set_ APIs.) + * + * There is no write support - on write, by default, all the chunks in the + * 'unknown' list are written in the specified position. + * + * The integer return from the callback function is interpreted thus: + * + * negative: An error occured, png_chunk_error will be called. + * zero: The chunk was not handled, the chunk will be saved. A critical + * chunk will cause an error at this point unless it is to be saved. + * positive: The chunk was handled, libpng will ignore/discard it. + * + * See "INTERACTION WTIH USER CHUNK CALLBACKS" below for important notes about + * how this behavior will change in libpng 1.7 + */ +PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structrp png_ptr, + png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +PNG_EXPORT(89, png_voidp, png_get_user_chunk_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +/* Sets the function callbacks for the push reader, and a pointer to a + * user-defined structure available to the callback functions. + */ +PNG_EXPORT(90, void, png_set_progressive_read_fn, (png_structrp png_ptr, + png_voidp progressive_ptr, png_progressive_info_ptr info_fn, + png_progressive_row_ptr row_fn, png_progressive_end_ptr end_fn)); + +/* Returns the user pointer associated with the push read functions */ +PNG_EXPORT(91, png_voidp, png_get_progressive_ptr, + (png_const_structrp png_ptr)); + +/* Function to be called when data becomes available */ +PNG_EXPORT(92, void, png_process_data, (png_structrp png_ptr, + png_inforp info_ptr, png_bytep buffer, png_size_t buffer_size)); + +/* A function which may be called *only* within png_process_data to stop the + * processing of any more data. The function returns the number of bytes + * remaining, excluding any that libpng has cached internally. A subsequent + * call to png_process_data must supply these bytes again. If the argument + * 'save' is set to true the routine will first save all the pending data and + * will always return 0. + */ +PNG_EXPORT(219, png_size_t, png_process_data_pause, (png_structrp, int save)); + +/* A function which may be called *only* outside (after) a call to + * png_process_data. It returns the number of bytes of data to skip in the + * input. Normally it will return 0, but if it returns a non-zero value the + * application must skip than number of bytes of input data and pass the + * following data to the next call to png_process_data. + */ +PNG_EXPORT(220, png_uint_32, png_process_data_skip, (png_structrp)); + +#ifdef PNG_READ_INTERLACING_SUPPORTED +/* Function that combines rows. 'new_row' is a flag that should come from + * the callback and be non-NULL if anything needs to be done; the library + * stores its own version of the new data internally and ignores the passed + * in value. + */ +PNG_EXPORT(93, void, png_progressive_combine_row, (png_const_structrp png_ptr, + png_bytep old_row, png_const_bytep new_row)); +#endif /* PNG_READ_INTERLACING_SUPPORTED */ +#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */ + +PNG_EXPORTA(94, png_voidp, png_malloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); +/* Added at libpng version 1.4.0 */ +PNG_EXPORTA(95, png_voidp, png_calloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Added at libpng version 1.2.4 */ +PNG_EXPORTA(96, png_voidp, png_malloc_warn, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Frees a pointer allocated by png_malloc() */ +PNG_EXPORT(97, void, png_free, (png_const_structrp png_ptr, png_voidp ptr)); + +/* Free data that was allocated internally */ +PNG_EXPORT(98, void, png_free_data, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 free_me, int num)); + +/* Reassign responsibility for freeing existing data, whether allocated + * by libpng or by the application; this works on the png_info structure passed + * in, it does not change the state for other png_info structures. + * + * It is unlikely that this function works correctly as of 1.6.0 and using it + * may result either in memory leaks or double free of allocated data. + */ +PNG_EXPORTA(99, void, png_data_freer, (png_const_structrp png_ptr, + png_inforp info_ptr, int freer, png_uint_32 mask), PNG_DEPRECATED); + +/* Assignments for png_data_freer */ +#define PNG_DESTROY_WILL_FREE_DATA 1 +#define PNG_SET_WILL_FREE_DATA 1 +#define PNG_USER_WILL_FREE_DATA 2 +/* Flags for png_ptr->free_me and info_ptr->free_me */ +#define PNG_FREE_HIST 0x0008 +#define PNG_FREE_ICCP 0x0010 +#define PNG_FREE_SPLT 0x0020 +#define PNG_FREE_ROWS 0x0040 +#define PNG_FREE_PCAL 0x0080 +#define PNG_FREE_SCAL 0x0100 +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +# define PNG_FREE_UNKN 0x0200 +#endif +/* PNG_FREE_LIST 0x0400 removed in 1.6.0 because it is ignored */ +#define PNG_FREE_PLTE 0x1000 +#define PNG_FREE_TRNS 0x2000 +#define PNG_FREE_TEXT 0x4000 +#define PNG_FREE_ALL 0x7fff +#define PNG_FREE_MUL 0x4220 /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */ + +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(100, png_voidp, png_malloc_default, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED PNG_DEPRECATED); +PNG_EXPORTA(101, void, png_free_default, (png_const_structrp png_ptr, + png_voidp ptr), PNG_DEPRECATED); +#endif + +#ifdef PNG_ERROR_TEXT_SUPPORTED +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(102, void, png_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +/* The same, but the chunk name is prepended to the error string. */ +PNG_EXPORTA(103, void, png_chunk_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +#else +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(104, void, png_err, (png_const_structrp png_ptr), PNG_NORETURN); +#endif + +#ifdef PNG_WARNINGS_SUPPORTED +/* Non-fatal error in libpng. Can continue, but may have a problem. */ +PNG_EXPORT(105, void, png_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +/* Non-fatal error in libpng, chunk name is prepended to message. */ +PNG_EXPORT(106, void, png_chunk_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#endif + +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +/* Benign error in libpng. Can continue, but may have a problem. + * User can choose whether to handle as a fatal error or as a warning. */ +PNG_EXPORT(107, void, png_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +#ifdef PNG_READ_SUPPORTED +/* Same, chunk name is prepended to message (only during read) */ +PNG_EXPORT(108, void, png_chunk_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#endif + +PNG_EXPORT(109, void, png_set_benign_errors, + (png_structrp png_ptr, int allowed)); +#else +# ifdef PNG_ALLOW_BENIGN_ERRORS +# define png_benign_error png_warning +# define png_chunk_benign_error png_chunk_warning +# else +# define png_benign_error png_error +# define png_chunk_benign_error png_chunk_error +# endif +#endif + +/* The png_set_ functions are for storing values in the png_info_struct. + * Similarly, the png_get_ calls are used to read values from the + * png_info_struct, either storing the parameters in the passed variables, or + * setting pointers into the png_info_struct where the data is stored. The + * png_get_ functions return a non-zero value if the data was available + * in info_ptr, or return zero and do not change any of the parameters if the + * data was not available. + * + * These functions should be used instead of directly accessing png_info + * to avoid problems with future changes in the size and internal layout of + * png_info_struct. + */ +/* Returns "flag" if chunk data is valid in info_ptr. */ +PNG_EXPORT(110, png_uint_32, png_get_valid, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 flag)); + +/* Returns number of bytes needed to hold a transformed row. */ +PNG_EXPORT(111, png_size_t, png_get_rowbytes, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* Returns row_pointers, which is an array of pointers to scanlines that was + * returned from png_read_png(). + */ +PNG_EXPORT(112, png_bytepp, png_get_rows, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Set row_pointers, which is an array of pointers to scanlines for use + * by png_write_png(). + */ +PNG_EXPORT(113, void, png_set_rows, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytepp row_pointers)); +#endif + +/* Returns number of color channels in image. */ +PNG_EXPORT(114, png_byte, png_get_channels, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_EASY_ACCESS_SUPPORTED +/* Returns image width in pixels. */ +PNG_EXPORT(115, png_uint_32, png_get_image_width, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image height in pixels. */ +PNG_EXPORT(116, png_uint_32, png_get_image_height, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image bit_depth. */ +PNG_EXPORT(117, png_byte, png_get_bit_depth, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image color_type. */ +PNG_EXPORT(118, png_byte, png_get_color_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image filter_type. */ +PNG_EXPORT(119, png_byte, png_get_filter_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image interlace_type. */ +PNG_EXPORT(120, png_byte, png_get_interlace_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image compression_type. */ +PNG_EXPORT(121, png_byte, png_get_compression_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image resolution in pixels per meter, from pHYs chunk data. */ +PNG_EXPORT(122, png_uint_32, png_get_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(123, png_uint_32, png_get_x_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(124, png_uint_32, png_get_y_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +/* Returns pixel aspect ratio, computed from pHYs chunk data. */ +PNG_FP_EXPORT(125, float, png_get_pixel_aspect_ratio, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +PNG_FIXED_EXPORT(210, png_fixed_point, png_get_pixel_aspect_ratio_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) + +/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */ +PNG_EXPORT(126, png_int_32, png_get_x_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(127, png_int_32, png_get_y_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(128, png_int_32, png_get_x_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(129, png_int_32, png_get_y_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +#endif /* PNG_EASY_ACCESS_SUPPORTED */ + +#ifdef PNG_READ_SUPPORTED +/* Returns pointer to signature string read from PNG header */ +PNG_EXPORT(130, png_const_bytep, png_get_signature, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(131, png_uint_32, png_get_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_16p *background)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(132, void, png_set_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_16p background)); +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(133, png_uint_32, png_get_cHRM, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *white_x, double *white_y, double *red_x, + double *red_y, double *green_x, double *green_y, double *blue_x, + double *blue_y)) +PNG_FP_EXPORT(230, png_uint_32, png_get_cHRM_XYZ, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *red_X, double *red_Y, double *red_Z, + double *green_X, double *green_Y, double *green_Z, double *blue_X, + double *blue_Y, double *blue_Z)) +PNG_FIXED_EXPORT(134, png_uint_32, png_get_cHRM_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_white_x, png_fixed_point *int_white_y, + png_fixed_point *int_red_x, png_fixed_point *int_red_y, + png_fixed_point *int_green_x, png_fixed_point *int_green_y, + png_fixed_point *int_blue_x, png_fixed_point *int_blue_y)) +PNG_FIXED_EXPORT(231, png_uint_32, png_get_cHRM_XYZ_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_red_X, png_fixed_point *int_red_Y, + png_fixed_point *int_red_Z, png_fixed_point *int_green_X, + png_fixed_point *int_green_Y, png_fixed_point *int_green_Z, + png_fixed_point *int_blue_X, png_fixed_point *int_blue_Y, + png_fixed_point *int_blue_Z)) +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(135, void, png_set_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y)) +PNG_FP_EXPORT(232, void, png_set_cHRM_XYZ, (png_const_structrp png_ptr, + png_inforp info_ptr, double red_X, double red_Y, double red_Z, + double green_X, double green_Y, double green_Z, double blue_X, + double blue_Y, double blue_Z)) +PNG_FIXED_EXPORT(136, void, png_set_cHRM_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_white_x, + png_fixed_point int_white_y, png_fixed_point int_red_x, + png_fixed_point int_red_y, png_fixed_point int_green_x, + png_fixed_point int_green_y, png_fixed_point int_blue_x, + png_fixed_point int_blue_y)) +PNG_FIXED_EXPORT(233, void, png_set_cHRM_XYZ_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_red_X, png_fixed_point int_red_Y, + png_fixed_point int_red_Z, png_fixed_point int_green_X, + png_fixed_point int_green_Y, png_fixed_point int_green_Z, + png_fixed_point int_blue_X, png_fixed_point int_blue_Y, + png_fixed_point int_blue_Z)) +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(137, png_uint_32, png_get_gAMA, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *file_gamma)) +PNG_FIXED_EXPORT(138, png_uint_32, png_get_gAMA_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_file_gamma)) +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(139, void, png_set_gAMA, (png_const_structrp png_ptr, + png_inforp info_ptr, double file_gamma)) +PNG_FIXED_EXPORT(140, void, png_set_gAMA_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_file_gamma)) +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(141, png_uint_32, png_get_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_16p *hist)); +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(142, void, png_set_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_uint_16p hist)); +#endif + +PNG_EXPORT(143, png_uint_32, png_get_IHDR, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *width, png_uint_32 *height, + int *bit_depth, int *color_type, int *interlace_method, + int *compression_method, int *filter_method)); + +PNG_EXPORT(144, void, png_set_IHDR, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 width, png_uint_32 height, int bit_depth, + int color_type, int interlace_method, int compression_method, + int filter_method)); + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(145, png_uint_32, png_get_oFFs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_int_32 *offset_x, png_int_32 *offset_y, + int *unit_type)); +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(146, void, png_set_oFFs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_int_32 offset_x, png_int_32 offset_y, + int unit_type)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(147, png_uint_32, png_get_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charp *purpose, png_int_32 *X0, + png_int_32 *X1, int *type, int *nparams, png_charp *units, + png_charpp *params)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(148, void, png_set_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp purpose, png_int_32 X0, png_int_32 X1, + int type, int nparams, png_const_charp units, png_charpp params)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(149, png_uint_32, png_get_pHYs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(150, void, png_set_pHYs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 res_x, png_uint_32 res_y, int unit_type)); +#endif + +PNG_EXPORT(151, png_uint_32, png_get_PLTE, (png_const_structrp png_ptr, + png_inforp info_ptr, png_colorp *palette, int *num_palette)); + +PNG_EXPORT(152, void, png_set_PLTE, (png_structrp png_ptr, + png_inforp info_ptr, png_const_colorp palette, int num_palette)); + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(153, png_uint_32, png_get_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_8p *sig_bit)); +#endif + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(154, void, png_set_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_8p sig_bit)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(155, png_uint_32, png_get_sRGB, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *file_srgb_intent)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(156, void, png_set_sRGB, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +PNG_EXPORT(157, void, png_set_sRGB_gAMA_and_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(158, png_uint_32, png_get_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charpp name, int *compression_type, + png_bytepp profile, png_uint_32 *proflen)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(159, void, png_set_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp name, int compression_type, + png_const_bytep profile, png_uint_32 proflen)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(160, int, png_get_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_sPLT_tpp entries)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(161, void, png_set_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_sPLT_tp entries, int nentries)); +#endif + +#ifdef PNG_TEXT_SUPPORTED +/* png_get_text also returns the number of text chunks in *num_text */ +PNG_EXPORT(162, int, png_get_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_textp *text_ptr, int *num_text)); +#endif + +/* Note while png_set_text() will accept a structure whose text, + * language, and translated keywords are NULL pointers, the structure + * returned by png_get_text will always contain regular + * zero-terminated C strings. They might be empty strings but + * they will never be NULL pointers. + */ + +#ifdef PNG_TEXT_SUPPORTED +PNG_EXPORT(163, void, png_set_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_textp text_ptr, int num_text)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(164, png_uint_32, png_get_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_timep *mod_time)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(165, void, png_set_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_timep mod_time)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(166, png_uint_32, png_get_tRNS, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep *trans_alpha, int *num_trans, + png_color_16p *trans_color)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(167, void, png_set_tRNS, (png_structrp png_ptr, + png_inforp info_ptr, png_const_bytep trans_alpha, int num_trans, + png_const_color_16p trans_color)); +#endif + +#ifdef PNG_sCAL_SUPPORTED +PNG_FP_EXPORT(168, png_uint_32, png_get_sCAL, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *unit, double *width, double *height)) +#if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || \ + defined(PNG_FLOATING_POINT_SUPPORTED) +/* NOTE: this API is currently implemented using floating point arithmetic, + * consequently it can only be used on systems with floating point support. + * In any case the range of values supported by png_fixed_point is small and it + * is highly recommended that png_get_sCAL_s be used instead. + */ +PNG_FIXED_EXPORT(214, png_uint_32, png_get_sCAL_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_fixed_point *width, png_fixed_point *height)) +#endif +PNG_EXPORT(169, png_uint_32, png_get_sCAL_s, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_charpp swidth, png_charpp sheight)); + +PNG_FP_EXPORT(170, void, png_set_sCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, double width, double height)) +PNG_FIXED_EXPORT(213, void, png_set_sCAL_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, png_fixed_point width, + png_fixed_point height)) +PNG_EXPORT(171, void, png_set_sCAL_s, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, + png_const_charp swidth, png_const_charp sheight)); +#endif /* PNG_sCAL_SUPPORTED */ + +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +/* Provide the default handling for all unknown chunks or, optionally, for + * specific unknown chunks. + * + * NOTE: prior to 1.6.0 the handling specified for particular chunks on read was + * ignored and the default was used, the per-chunk setting only had an effect on + * write. If you wish to have chunk-specific handling on read in code that must + * work on earlier versions you must use a user chunk callback to specify the + * desired handling (keep or discard.) + * + * The 'keep' parameter is a PNG_HANDLE_CHUNK_ value as listed below. The + * parameter is interpreted as follows: + * + * READ: + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Known chunks: do normal libpng processing, do not keep the chunk (but + * see the comments below about PNG_HANDLE_AS_UNKNOWN_SUPPORTED) + * Unknown chunks: for a specific chunk use the global default, when used + * as the default discard the chunk data. + * PNG_HANDLE_CHUNK_NEVER: + * Discard the chunk data. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Keep the chunk data if the chunk is not critical else raise a chunk + * error. + * PNG_HANDLE_CHUNK_ALWAYS: + * Keep the chunk data. + * + * If the chunk data is saved it can be retrieved using png_get_unknown_chunks, + * below. Notice that specifying "AS_DEFAULT" as a global default is equivalent + * to specifying "NEVER", however when "AS_DEFAULT" is used for specific chunks + * it simply resets the behavior to the libpng default. + * + * INTERACTION WTIH USER CHUNK CALLBACKS: + * The per-chunk handling is always used when there is a png_user_chunk_ptr + * callback and the callback returns 0; the chunk is then always stored *unless* + * it is critical and the per-chunk setting is other than ALWAYS. Notice that + * the global default is *not* used in this case. (In effect the per-chunk + * value is incremented to at least IF_SAFE.) + * + * IMPORTANT NOTE: this behavior will change in libpng 1.7 - the global and + * per-chunk defaults will be honored. If you want to preserve the current + * behavior when your callback returns 0 you must set PNG_HANDLE_CHUNK_IF_SAFE + * as the default - if you don't do this libpng 1.6 will issue a warning. + * + * If you want unhandled unknown chunks to be discarded in libpng 1.6 and + * earlier simply return '1' (handled). + * + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED: + * If this is *not* set known chunks will always be handled by libpng and + * will never be stored in the unknown chunk list. Known chunks listed to + * png_set_keep_unknown_chunks will have no effect. If it is set then known + * chunks listed with a keep other than AS_DEFAULT will *never* be processed + * by libpng, in addition critical chunks must either be processed by the + * callback or saved. + * + * The IHDR and IEND chunks must not be listed. Because this turns off the + * default handling for chunks that would otherwise be recognized the + * behavior of libpng transformations may well become incorrect! + * + * WRITE: + * When writing chunks the options only apply to the chunks specified by + * png_set_unknown_chunks (below), libpng will *always* write known chunks + * required by png_set_ calls and will always write the core critical chunks + * (as required for PLTE). + * + * Each chunk in the png_set_unknown_chunks list is looked up in the + * png_set_keep_unknown_chunks list to find the keep setting, this is then + * interpreted as follows: + * + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Write safe-to-copy chunks and write other chunks if the global + * default is set to _ALWAYS, otherwise don't write this chunk. + * PNG_HANDLE_CHUNK_NEVER: + * Do not write the chunk. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Write the chunk if it is safe-to-copy, otherwise do not write it. + * PNG_HANDLE_CHUNK_ALWAYS: + * Write the chunk. + * + * Note that the default behavior is effectively the opposite of the read case - + * in read unknown chunks are not stored by default, in write they are written + * by default. Also the behavior of PNG_HANDLE_CHUNK_IF_SAFE is very different + * - on write the safe-to-copy bit is checked, on read the critical bit is + * checked and on read if the chunk is critical an error will be raised. + * + * num_chunks: + * =========== + * If num_chunks is positive, then the "keep" parameter specifies the manner + * for handling only those chunks appearing in the chunk_list array, + * otherwise the chunk list array is ignored. + * + * If num_chunks is 0 the "keep" parameter specifies the default behavior for + * unknown chunks, as described above. + * + * If num_chunks is negative, then the "keep" parameter specifies the manner + * for handling all unknown chunks plus all chunks recognized by libpng + * except for the IHDR, PLTE, tRNS, IDAT, and IEND chunks (which continue to + * be processed by libpng. + */ +PNG_EXPORT(172, void, png_set_keep_unknown_chunks, (png_structrp png_ptr, + int keep, png_const_bytep chunk_list, int num_chunks)); + +/* The "keep" PNG_HANDLE_CHUNK_ parameter for the specified chunk is returned; + * the result is therefore true (non-zero) if special handling is required, + * false for the default handling. + */ +PNG_EXPORT(173, int, png_handle_as_unknown, (png_const_structrp png_ptr, + png_const_bytep chunk_name)); +#endif + +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +PNG_EXPORT(174, void, png_set_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_unknown_chunkp unknowns, + int num_unknowns)); + /* NOTE: prior to 1.6.0 this routine set the 'location' field of the added + * unknowns to the location currently stored in the png_struct. This is + * invariably the wrong value on write. To fix this call the following API + * for each chunk in the list with the correct location. If you know your + * code won't be compiled on earlier versions you can rely on + * png_set_unknown_chunks(write-ptr, png_get_unknown_chunks(read-ptr)) doing + * the correct thing. + */ + +PNG_EXPORT(175, void, png_set_unknown_chunk_location, + (png_const_structrp png_ptr, png_inforp info_ptr, int chunk, int location)); + +PNG_EXPORT(176, int, png_get_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_unknown_chunkpp entries)); +#endif + +/* Png_free_data() will turn off the "valid" flag for anything it frees. + * If you need to turn it off for a chunk that your application has freed, + * you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK); + */ +PNG_EXPORT(177, void, png_set_invalid, (png_const_structrp png_ptr, + png_inforp info_ptr, int mask)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* The "params" pointer is currently not used and is for future expansion. */ +PNG_EXPORT(178, void, png_read_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +PNG_EXPORT(179, void, png_write_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +#endif + +PNG_EXPORT(180, png_const_charp, png_get_copyright, + (png_const_structrp png_ptr)); +PNG_EXPORT(181, png_const_charp, png_get_header_ver, + (png_const_structrp png_ptr)); +PNG_EXPORT(182, png_const_charp, png_get_header_version, + (png_const_structrp png_ptr)); +PNG_EXPORT(183, png_const_charp, png_get_libpng_ver, + (png_const_structrp png_ptr)); + +#ifdef PNG_MNG_FEATURES_SUPPORTED +PNG_EXPORT(184, png_uint_32, png_permit_mng_features, (png_structrp png_ptr, + png_uint_32 mng_features_permitted)); +#endif + +/* For use in png_set_keep_unknown, added to version 1.2.6 */ +#define PNG_HANDLE_CHUNK_AS_DEFAULT 0 +#define PNG_HANDLE_CHUNK_NEVER 1 +#define PNG_HANDLE_CHUNK_IF_SAFE 2 +#define PNG_HANDLE_CHUNK_ALWAYS 3 +#define PNG_HANDLE_CHUNK_LAST 4 + +/* Strip the prepended error numbers ("#nnn ") from error and warning + * messages before passing them to the error or warning handler. + */ +#ifdef PNG_ERROR_NUMBERS_SUPPORTED +PNG_EXPORT(185, void, png_set_strip_error_numbers, (png_structrp png_ptr, + png_uint_32 strip_mode)); +#endif + +/* Added in libpng-1.2.6 */ +#ifdef PNG_SET_USER_LIMITS_SUPPORTED +PNG_EXPORT(186, void, png_set_user_limits, (png_structrp png_ptr, + png_uint_32 user_width_max, png_uint_32 user_height_max)); +PNG_EXPORT(187, png_uint_32, png_get_user_width_max, + (png_const_structrp png_ptr)); +PNG_EXPORT(188, png_uint_32, png_get_user_height_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.0 */ +PNG_EXPORT(189, void, png_set_chunk_cache_max, (png_structrp png_ptr, + png_uint_32 user_chunk_cache_max)); +PNG_EXPORT(190, png_uint_32, png_get_chunk_cache_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.1 */ +PNG_EXPORT(191, void, png_set_chunk_malloc_max, (png_structrp png_ptr, + png_alloc_size_t user_chunk_cache_max)); +PNG_EXPORT(192, png_alloc_size_t, png_get_chunk_malloc_max, + (png_const_structrp png_ptr)); +#endif + +#if defined(PNG_INCH_CONVERSIONS_SUPPORTED) +PNG_EXPORT(193, png_uint_32, png_get_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(194, png_uint_32, png_get_x_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(195, png_uint_32, png_get_y_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_FP_EXPORT(196, float, png_get_x_offset_inches, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(211, png_fixed_point, png_get_x_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +PNG_FP_EXPORT(197, float, png_get_y_offset_inches, (png_const_structrp png_ptr, + png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(212, png_fixed_point, png_get_y_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +# ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(198, png_uint_32, png_get_pHYs_dpi, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +# endif /* PNG_pHYs_SUPPORTED */ +#endif /* PNG_INCH_CONVERSIONS_SUPPORTED */ + +/* Added in libpng-1.4.0 */ +#ifdef PNG_IO_STATE_SUPPORTED +PNG_EXPORT(199, png_uint_32, png_get_io_state, (png_const_structrp png_ptr)); + +/* Removed from libpng 1.6; use png_get_io_chunk_type. */ +PNG_REMOVED(200, png_const_bytep, png_get_io_chunk_name, (png_structrp png_ptr), + PNG_DEPRECATED) + +PNG_EXPORT(216, png_uint_32, png_get_io_chunk_type, + (png_const_structrp png_ptr)); + +/* The flags returned by png_get_io_state() are the following: */ +# define PNG_IO_NONE 0x0000 /* no I/O at this moment */ +# define PNG_IO_READING 0x0001 /* currently reading */ +# define PNG_IO_WRITING 0x0002 /* currently writing */ +# define PNG_IO_SIGNATURE 0x0010 /* currently at the file signature */ +# define PNG_IO_CHUNK_HDR 0x0020 /* currently at the chunk header */ +# define PNG_IO_CHUNK_DATA 0x0040 /* currently at the chunk data */ +# define PNG_IO_CHUNK_CRC 0x0080 /* currently at the chunk crc */ +# define PNG_IO_MASK_OP 0x000f /* current operation: reading/writing */ +# define PNG_IO_MASK_LOC 0x00f0 /* current location: sig/hdr/data/crc */ +#endif /* ?PNG_IO_STATE_SUPPORTED */ + +/* Interlace support. The following macros are always defined so that if + * libpng interlace handling is turned off the macros may be used to handle + * interlaced images within the application. + */ +#define PNG_INTERLACE_ADAM7_PASSES 7 + +/* Two macros to return the first row and first column of the original, + * full, image which appears in a given pass. 'pass' is in the range 0 + * to 6 and the result is in the range 0 to 7. + */ +#define PNG_PASS_START_ROW(pass) (((1&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1& (pass))<<(3-(((pass)+1)>>1)))&7) + +/* A macro to return the offset between pixels in the output row for a pair of + * pixels in the input - effectively the inverse of the 'COL_SHIFT' macro that + * follows. Note that ROW_OFFSET is the offset from one row to the next whereas + * COL_OFFSET is from one column to the next, within a row. + */ +#define PNG_PASS_ROW_OFFSET(pass) ((pass)>2?(8>>(((pass)-1)>>1)):8) +#define PNG_PASS_COL_OFFSET(pass) (1<<((7-(pass))>>1)) + +/* Two macros to help evaluate the number of rows or columns in each + * pass. This is expressed as a shift - effectively log2 of the number or + * rows or columns in each 8x8 tile of the original image. + */ +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) + +/* Hence two macros to determine the number of rows or columns in a given + * pass of an image given its height or width. In fact these macros may + * return non-zero even though the sub-image is empty, because the other + * dimension may be empty for a small image. + */ +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) + +/* For the reader row callbacks (both progressive and sequential) it is + * necessary to find the row in the output image given a row in an interlaced + * image, so two more macros: + */ +#define PNG_ROW_FROM_PASS_ROW(y_in, pass) \ + (((y_in)<>(((7-(off))-(pass))<<2)) & 0xF) | \ + ((0x01145AF0>>(((7-(off))-(pass))<<2)) & 0xF0)) + +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED +/* With these routines we avoid an integer divide, which will be slower on + * most machines. However, it does take more operations than the corresponding + * divide method, so it may be slower on a few RISC systems. There are two + * shifts (by 8 or 16 bits) and an addition, versus a single integer divide. + * + * Note that the rounding factors are NOT supposed to be the same! 128 and + * 32768 are correct for the NODIV code; 127 and 32767 are correct for the + * standard method. + * + * [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ] + */ + + /* fg and bg should be in `gamma 1.0' space; alpha is the opacity */ + +# define png_composite(composite, fg, alpha, bg) \ + { png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) \ + * (png_uint_16)(alpha) \ + + (png_uint_16)(bg)*(png_uint_16)(255 \ + - (png_uint_16)(alpha)) + 128); \ + (composite) = (png_byte)((temp + (temp >> 8)) >> 8); } + +# define png_composite_16(composite, fg, alpha, bg) \ + { png_uint_32 temp = (png_uint_32)((png_uint_32)(fg) \ + * (png_uint_32)(alpha) \ + + (png_uint_32)(bg)*(65535 \ + - (png_uint_32)(alpha)) + 32768); \ + (composite) = (png_uint_16)((temp + (temp >> 16)) >> 16); } + +#else /* Standard method using integer division */ + +# define png_composite(composite, fg, alpha, bg) \ + (composite) = (png_byte)(((png_uint_16)(fg) * (png_uint_16)(alpha) + \ + (png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) + \ + 127) / 255) + +# define png_composite_16(composite, fg, alpha, bg) \ + (composite) = (png_uint_16)(((png_uint_32)(fg) * (png_uint_32)(alpha) + \ + (png_uint_32)(bg)*(png_uint_32)(65535 - (png_uint_32)(alpha)) + \ + 32767) / 65535) +#endif /* PNG_READ_COMPOSITE_NODIV_SUPPORTED */ + +#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(201, png_uint_32, png_get_uint_32, (png_const_bytep buf)); +PNG_EXPORT(202, png_uint_16, png_get_uint_16, (png_const_bytep buf)); +PNG_EXPORT(203, png_int_32, png_get_int_32, (png_const_bytep buf)); +#endif + +PNG_EXPORT(204, png_uint_32, png_get_uint_31, (png_const_structrp png_ptr, + png_const_bytep buf)); +/* No png_get_int_16 -- may be added if there's a real need for it. */ + +/* Place a 32-bit number into a buffer in PNG byte order (big-endian). */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(205, void, png_save_uint_32, (png_bytep buf, png_uint_32 i)); +#endif +#ifdef PNG_SAVE_INT_32_SUPPORTED +PNG_EXPORT(206, void, png_save_int_32, (png_bytep buf, png_int_32 i)); +#endif + +/* Place a 16-bit number into a buffer in PNG byte order. + * The parameter is declared unsigned int, not png_uint_16, + * just to avoid potential problems on pre-ANSI C compilers. + */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(207, void, png_save_uint_16, (png_bytep buf, unsigned int i)); +/* No png_save_int_16 -- may be added if there's a real need for it. */ +#endif + +#ifdef PNG_USE_READ_MACROS +/* Inline macros to do direct reads of bytes from the input buffer. + * The png_get_int_32() routine assumes we are using two's complement + * format for negative values, which is almost certainly true. + */ +# define PNG_get_uint_32(buf) \ + (((png_uint_32)(*(buf)) << 24) + \ + ((png_uint_32)(*((buf) + 1)) << 16) + \ + ((png_uint_32)(*((buf) + 2)) << 8) + \ + ((png_uint_32)(*((buf) + 3)))) + + /* From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the + * function) incorrectly returned a value of type png_uint_32. + */ +# define PNG_get_uint_16(buf) \ + ((png_uint_16) \ + (((unsigned int)(*(buf)) << 8) + \ + ((unsigned int)(*((buf) + 1))))) + +# define PNG_get_int_32(buf) \ + ((png_int_32)((*(buf) & 0x80) \ + ? -((png_int_32)((png_get_uint_32(buf) ^ 0xffffffffL) + 1)) \ + : (png_int_32)png_get_uint_32(buf))) + + /* If PNG_PREFIX is defined the same thing as below happens in pnglibconf.h, + * but defining a macro name prefixed with PNG_PREFIX. + */ +# ifndef PNG_PREFIX +# define png_get_uint_32(buf) PNG_get_uint_32(buf) +# define png_get_uint_16(buf) PNG_get_uint_16(buf) +# define png_get_int_32(buf) PNG_get_int_32(buf) +# endif +#else +# ifdef PNG_PREFIX + /* No macros; revert to the (redefined) function */ +# define PNG_get_uint_32 (png_get_uint_32) +# define PNG_get_uint_16 (png_get_uint_16) +# define PNG_get_int_32 (png_get_int_32) +# endif +#endif + +/******************************************************************************* + * SIMPLIFIED API + ******************************************************************************* + * + * Please read the documentation in libpng-manual.txt (TODO: write said + * documentation) if you don't understand what follows. + * + * The simplified API hides the details of both libpng and the PNG file format + * itself. It allows PNG files to be read into a very limited number of + * in-memory bitmap formats or to be written from the same formats. If these + * formats do not accomodate your needs then you can, and should, use the more + * sophisticated APIs above - these support a wide variety of in-memory formats + * and a wide variety of sophisticated transformations to those formats as well + * as a wide variety of APIs to manipulate ancillary information. + * + * To read a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure (see below) on the stack and set the + * version field to PNG_IMAGE_VERSION. + * 2) Call the appropriate png_image_begin_read... function. + * 3) Set the png_image 'format' member to the required sample format. + * 4) Allocate a buffer for the image and, if required, the color-map. + * 5) Call png_image_finish_read to read the image and, if required, the + * color-map into your buffers. + * + * There are no restrictions on the format of the PNG input itself; all valid + * color types, bit depths, and interlace methods are acceptable, and the + * input image is transformed as necessary to the requested in-memory format + * during the png_image_finish_read() step. The only caveat is that if you + * request a color-mapped image from a PNG that is full-color or makes + * complex use of an alpha channel the transformation is extremely lossy and the + * result may look terrible. + * + * To write a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure on the stack and memset() it to all zero. + * 2) Initialize the members of the structure that describe the image, setting + * the 'format' member to the format of the image samples. + * 3) Call the appropriate png_image_write... function with a pointer to the + * image and, if necessary, the color-map to write the PNG data. + * + * png_image is a structure that describes the in-memory format of an image + * when it is being read or defines the in-memory format of an image that you + * need to write: + */ +#define PNG_IMAGE_VERSION 1 + +typedef struct png_control *png_controlp; +typedef struct +{ + png_controlp opaque; /* Initialize to NULL, free with png_image_free */ + png_uint_32 version; /* Set to PNG_IMAGE_VERSION */ + png_uint_32 width; /* Image width in pixels (columns) */ + png_uint_32 height; /* Image height in pixels (rows) */ + png_uint_32 format; /* Image format as defined below */ + png_uint_32 flags; /* A bit mask containing informational flags */ + png_uint_32 colormap_entries; + /* Number of entries in the color-map */ + + /* In the event of an error or warning the following field will be set to a + * non-zero value and the 'message' field will contain a '\0' terminated + * string with the libpng error or warning message. If both warnings and + * an error were encountered, only the error is recorded. If there + * are multiple warnings, only the first one is recorded. + * + * The upper 30 bits of this value are reserved, the low two bits contain + * a value as follows: + */ +# define PNG_IMAGE_WARNING 1 +# define PNG_IMAGE_ERROR 2 + /* + * The result is a two bit code such that a value more than 1 indicates + * a failure in the API just called: + * + * 0 - no warning or error + * 1 - warning + * 2 - error + * 3 - error preceded by warning + */ +# define PNG_IMAGE_FAILED(png_cntrl) ((((png_cntrl).warning_or_error)&0x03)>1) + + png_uint_32 warning_or_error; + + char message[64]; +} png_image, *png_imagep; + +/* The samples of the image have one to four channels whose components have + * original values in the range 0 to 1.0: + * + * 1: A single gray or luminance channel (G). + * 2: A gray/luminance channel and an alpha channel (GA). + * 3: Three red, green, blue color channels (RGB). + * 4: Three color channels and an alpha channel (RGBA). + * + * The components are encoded in one of two ways: + * + * a) As a small integer, value 0..255, contained in a single byte. For the + * alpha channel the original value is simply value/255. For the color or + * luminance channels the value is encoded according to the sRGB specification + * and matches the 8-bit format expected by typical display devices. + * + * The color/gray channels are not scaled (pre-multiplied) by the alpha + * channel and are suitable for passing to color management software. + * + * b) As a value in the range 0..65535, contained in a 2-byte integer. All + * channels can be converted to the original value by dividing by 65535; all + * channels are linear. Color channels use the RGB encoding (RGB end-points) of + * the sRGB specification. This encoding is identified by the + * PNG_FORMAT_FLAG_LINEAR flag below. + * + * When the simplified API needs to convert between sRGB and linear colorspaces, + * the actual sRGB transfer curve defined in the sRGB specification (see the + * article at http://en.wikipedia.org/wiki/SRGB) is used, not the gamma=1/2.2 + * approximation used elsewhere in libpng. + * + * When an alpha channel is present it is expected to denote pixel coverage + * of the color or luminance channels and is returned as an associated alpha + * channel: the color/gray channels are scaled (pre-multiplied) by the alpha + * value. + * + * The samples are either contained directly in the image data, between 1 and 8 + * bytes per pixel according to the encoding, or are held in a color-map indexed + * by bytes in the image data. In the case of a color-map the color-map entries + * are individual samples, encoded as above, and the image data has one byte per + * pixel to select the relevant sample from the color-map. + */ + +/* PNG_FORMAT_* + * + * #defines to be used in png_image::format. Each #define identifies a + * particular layout of sample data and, if present, alpha values. There are + * separate defines for each of the two component encodings. + * + * A format is built up using single bit flag values. All combinations are + * valid. Formats can be built up from the flag values or you can use one of + * the predefined values below. When testing formats always use the FORMAT_FLAG + * macros to test for individual features - future versions of the library may + * add new flags. + * + * When reading or writing color-mapped images the format should be set to the + * format of the entries in the color-map then png_image_{read,write}_colormap + * called to read or write the color-map and set the format correctly for the + * image data. Do not set the PNG_FORMAT_FLAG_COLORMAP bit directly! + * + * NOTE: libpng can be built with particular features disabled, if you see + * compiler errors because the definition of one of the following flags has been + * compiled out it is because libpng does not have the required support. It is + * possible, however, for the libpng configuration to enable the format on just + * read or just write; in that case you may see an error at run time. You can + * guard against this by checking for the definition of the appropriate + * "_SUPPORTED" macro, one of: + * + * PNG_SIMPLIFIED_{READ,WRITE}_{BGR,AFIRST}_SUPPORTED + */ +#define PNG_FORMAT_FLAG_ALPHA 0x01U /* format with an alpha channel */ +#define PNG_FORMAT_FLAG_COLOR 0x02U /* color format: otherwise grayscale */ +#define PNG_FORMAT_FLAG_LINEAR 0x04U /* 2 byte channels else 1 byte */ +#define PNG_FORMAT_FLAG_COLORMAP 0x08U /* image data is color-mapped */ + +#ifdef PNG_FORMAT_BGR_SUPPORTED +# define PNG_FORMAT_FLAG_BGR 0x10U /* BGR colors, else order is RGB */ +#endif + +#ifdef PNG_FORMAT_AFIRST_SUPPORTED +# define PNG_FORMAT_FLAG_AFIRST 0x20U /* alpha channel comes first */ +#endif + +/* Commonly used formats have predefined macros. + * + * First the single byte (sRGB) formats: + */ +#define PNG_FORMAT_GRAY 0 +#define PNG_FORMAT_GA PNG_FORMAT_FLAG_ALPHA +#define PNG_FORMAT_AG (PNG_FORMAT_GA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_RGB PNG_FORMAT_FLAG_COLOR +#define PNG_FORMAT_BGR (PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_BGR) +#define PNG_FORMAT_RGBA (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ARGB (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_BGRA (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ABGR (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_AFIRST) + +/* Then the linear 2-byte formats. When naming these "Y" is used to + * indicate a luminance (gray) channel. + */ +#define PNG_FORMAT_LINEAR_Y PNG_FORMAT_FLAG_LINEAR +#define PNG_FORMAT_LINEAR_Y_ALPHA (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_LINEAR_RGB (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR) +#define PNG_FORMAT_LINEAR_RGB_ALPHA \ + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA) + +/* With color-mapped formats the image data is one byte for each pixel, the byte + * is an index into the color-map which is formatted as above. To obtain a + * color-mapped format it is sufficient just to add the PNG_FOMAT_FLAG_COLORMAP + * to one of the above definitions, or you can use one of the definitions below. + */ +#define PNG_FORMAT_RGB_COLORMAP (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGR_COLORMAP (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_RGBA_COLORMAP (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ARGB_COLORMAP (PNG_FORMAT_ARGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGRA_COLORMAP (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ABGR_COLORMAP (PNG_FORMAT_ABGR|PNG_FORMAT_FLAG_COLORMAP) + +/* PNG_IMAGE macros + * + * These are convenience macros to derive information from a png_image + * structure. The PNG_IMAGE_SAMPLE_ macros return values appropriate to the + * actual image sample values - either the entries in the color-map or the + * pixels in the image. The PNG_IMAGE_PIXEL_ macros return corresponding values + * for the pixels and will always return 1 for color-mapped formats. The + * remaining macros return information about the rows in the image and the + * complete image. + * + * NOTE: All the macros that take a png_image::format parameter are compile time + * constants if the format parameter is, itself, a constant. Therefore these + * macros can be used in array declarations and case labels where required. + * Similarly the macros are also pre-processor constants (sizeof is not used) so + * they can be used in #if tests. + * + * First the information about the samples. + */ +#define PNG_IMAGE_SAMPLE_CHANNELS(fmt)\ + (((fmt)&(PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA))+1) + /* Return the total number of channels in a given format: 1..4 */ + +#define PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)\ + ((((fmt) & PNG_FORMAT_FLAG_LINEAR) >> 2)+1) + /* Return the size in bytes of a single component of a pixel or color-map + * entry (as appropriate) in the image: 1 or 2. + */ + +#define PNG_IMAGE_SAMPLE_SIZE(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)) + /* This is the size of the sample data for one sample. If the image is + * color-mapped it is the size of one color-map entry (and image pixels are + * one byte in size), otherwise it is the size of one image pixel. + */ + +#define PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * 256) + /* The maximum size of the color-map required by the format expressed in a + * count of components. This can be used to compile-time allocate a + * color-map: + * + * png_uint_16 colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(linear_fmt)]; + * + * png_byte colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(sRGB_fmt)]; + * + * Alternatively use the PNG_IMAGE_COLORMAP_SIZE macro below to use the + * information from one of the png_image_begin_read_ APIs and dynamically + * allocate the required memory. + */ + +/* Corresponding information about the pixels */ +#define PNG_IMAGE_PIXEL_(test,fmt)\ + (((fmt)&PNG_FORMAT_FLAG_COLORMAP)?1:test(fmt)) + +#define PNG_IMAGE_PIXEL_CHANNELS(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_CHANNELS,fmt) + /* The number of separate channels (components) in a pixel; 1 for a + * color-mapped image. + */ + +#define PNG_IMAGE_PIXEL_COMPONENT_SIZE(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_COMPONENT_SIZE,fmt) + /* The size, in bytes, of each component in a pixel; 1 for a color-mapped + * image. + */ + +#define PNG_IMAGE_PIXEL_SIZE(fmt) PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_SIZE,fmt) + /* The size, in bytes, of a complete pixel; 1 for a color-mapped image. */ + +/* Information about the whole row, or whole image */ +#define PNG_IMAGE_ROW_STRIDE(image)\ + (PNG_IMAGE_PIXEL_CHANNELS((image).format) * (image).width) + /* Return the total number of components in a single row of the image; this + * is the minimum 'row stride', the minimum count of components between each + * row. For a color-mapped image this is the minimum number of bytes in a + * row. + */ + +#define PNG_IMAGE_BUFFER_SIZE(image, row_stride)\ + (PNG_IMAGE_PIXEL_COMPONENT_SIZE((image).format)*(image).height*(row_stride)) + /* Return the size, in bytes, of an image buffer given a png_image and a row + * stride - the number of components to leave space for in each row. + */ + +#define PNG_IMAGE_SIZE(image)\ + PNG_IMAGE_BUFFER_SIZE(image, PNG_IMAGE_ROW_STRIDE(image)) + /* Return the size, in bytes, of the image in memory given just a png_image; + * the row stride is the minimum stride required for the image. + */ + +#define PNG_IMAGE_COLORMAP_SIZE(image)\ + (PNG_IMAGE_SAMPLE_SIZE((image).format) * (image).colormap_entries) + /* Return the size, in bytes, of the color-map of this image. If the image + * format is not a color-map format this will return a size sufficient for + * 256 entries in the given format; check PNG_FORMAT_FLAG_COLORMAP if + * you don't want to allocate a color-map in this case. + */ + +/* PNG_IMAGE_FLAG_* + * + * Flags containing additional information about the image are held in the + * 'flags' field of png_image. + */ +#define PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB 0x01 + /* This indicates the the RGB values of the in-memory bitmap do not + * correspond to the red, green and blue end-points defined by sRGB. + */ + +#define PNG_IMAGE_FLAG_FAST 0x02 + /* On write emphasise speed over compression; the resultant PNG file will be + * larger but will be produced significantly faster, particular for large + * images. Do not use this option for images which will be distributed, only + * used it when producing intermediate files that will be read back in + * repeatedly. For a typical 24-bit image the option will double the read + * speed at the cost of increasing the image size by 25%, however for many + * more compressible images the PNG file can be 10 times larger with only a + * slight speed gain. + */ + +#define PNG_IMAGE_FLAG_16BIT_sRGB 0x04 + /* On read if the image is a 16-bit per component image and there is no gAMA + * or sRGB chunk assume that the components are sRGB encoded. Notice that + * images output by the simplified API always have gamma information; setting + * this flag only affects the interpretation of 16-bit images from an + * external source. It is recommended that the application expose this flag + * to the user; the user can normally easily recognize the difference between + * linear and sRGB encoding. This flag has no effect on write - the data + * passed to the write APIs must have the correct encoding (as defined + * above.) + * + * If the flag is not set (the default) input 16-bit per component data is + * assumed to be linear. + * + * NOTE: the flag can only be set after the png_image_begin_read_ call, + * because that call initializes the 'flags' field. + */ + +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED +/* READ APIs + * --------- + * + * The png_image passed to the read APIs must have been initialized by setting + * the png_controlp field 'opaque' to NULL (or, safer, memset the whole thing.) + */ +#ifdef PNG_STDIO_SUPPORTED +PNG_EXPORT(234, int, png_image_begin_read_from_file, (png_imagep image, + const char *file_name)); + /* The named file is opened for read and the image header is filled in + * from the PNG header in the file. + */ + +PNG_EXPORT(235, int, png_image_begin_read_from_stdio, (png_imagep image, + FILE* file)); + /* The PNG header is read from the stdio FILE object. */ +#endif /* PNG_STDIO_SUPPORTED */ + +PNG_EXPORT(236, int, png_image_begin_read_from_memory, (png_imagep image, + png_const_voidp memory, png_size_t size)); + /* The PNG header is read from the given memory buffer. */ + +PNG_EXPORT(237, int, png_image_finish_read, (png_imagep image, + png_const_colorp background, void *buffer, png_int_32 row_stride, + void *colormap)); + /* Finish reading the image into the supplied buffer and clean up the + * png_image structure. + * + * row_stride is the step, in byte or 2-byte units as appropriate, + * between adjacent rows. A positive stride indicates that the top-most row + * is first in the buffer - the normal top-down arrangement. A negative + * stride indicates that the bottom-most row is first in the buffer. + * + * background need only be supplied if an alpha channel must be removed from + * a png_byte format and the removal is to be done by compositing on a solid + * color; otherwise it may be NULL and any composition will be done directly + * onto the buffer. The value is an sRGB color to use for the background, + * for grayscale output the green channel is used. + * + * background must be supplied when an alpha channel must be removed from a + * single byte color-mapped output format, in other words if: + * + * 1) The original format from png_image_begin_read_from_* had + * PNG_FORMAT_FLAG_ALPHA set. + * 2) The format set by the application does not. + * 3) The format set by the application has PNG_FORMAT_FLAG_COLORMAP set and + * PNG_FORMAT_FLAG_LINEAR *not* set. + * + * For linear output removing the alpha channel is always done by compositing + * on black and background is ignored. + * + * colormap must be supplied when PNG_FORMAT_FLAG_COLORMAP is set. It must + * be at least the size (in bytes) returned by PNG_IMAGE_COLORMAP_SIZE. + * image->colormap_entries will be updated to the actual number of entries + * written to the colormap; this may be less than the original value. + */ + +PNG_EXPORT(238, void, png_image_free, (png_imagep image)); + /* Free any data allocated by libpng in image->opaque, setting the pointer to + * NULL. May be called at any time after the structure is initialized. + */ +#endif /* PNG_SIMPLIFIED_READ_SUPPORTED */ + +#ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED +/* WRITE APIS + * ---------- + * For write you must initialize a png_image structure to describe the image to + * be written. To do this use memset to set the whole structure to 0 then + * initialize fields describing your image. + * + * version: must be set to PNG_IMAGE_VERSION + * opaque: must be initialized to NULL + * width: image width in pixels + * height: image height in rows + * format: the format of the data (image and color-map) you wish to write + * flags: set to 0 unless one of the defined flags applies; set + * PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB for color format images where the RGB + * values do not correspond to the colors in sRGB. + * colormap_entries: set to the number of entries in the color-map (0 to 256) + */ +PNG_EXPORT(239, int, png_image_write_to_file, (png_imagep image, + const char *file, int convert_to_8bit, const void *buffer, + png_int_32 row_stride, const void *colormap)); + /* Write the image to the named file. */ + +PNG_EXPORT(240, int, png_image_write_to_stdio, (png_imagep image, FILE *file, + int convert_to_8_bit, const void *buffer, png_int_32 row_stride, + const void *colormap)); + /* Write the image to the given (FILE*). */ + +/* With both write APIs if image is in one of the linear formats with 16-bit + * data then setting convert_to_8_bit will cause the output to be an 8-bit PNG + * gamma encoded according to the sRGB specification, otherwise a 16-bit linear + * encoded PNG file is written. + * + * With color-mapped data formats the colormap parameter point to a color-map + * with at least image->colormap_entries encoded in the specified format. If + * the format is linear the written PNG color-map will be converted to sRGB + * regardless of the convert_to_8_bit flag. + * + * With all APIs row_stride is handled as in the read APIs - it is the spacing + * from one row to the next in component sized units (1 or 2 bytes) and if + * negative indicates a bottom-up row layout in the buffer. + * + * Note that the write API does not support interlacing or sub-8-bit pixels. + */ +#endif /* PNG_SIMPLIFIED_WRITE_SUPPORTED */ +/******************************************************************************* + * END OF SIMPLIFIED API + ******************************************************************************/ + +#ifdef PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +PNG_EXPORT(242, void, png_set_check_for_invalid_index, + (png_structrp png_ptr, int allowed)); +# ifdef PNG_GET_PALETTE_MAX_SUPPORTED +PNG_EXPORT(243, int, png_get_palette_max, (png_const_structp png_ptr, + png_const_infop info_ptr)); +# endif +#endif /* CHECK_FOR_INVALID_INDEX */ + +/******************************************************************************* + * IMPLEMENTATION OPTIONS + ******************************************************************************* + * + * Support for arbitrary implementation-specific optimizations. The API allows + * particular options to be turned on or off. 'Option' is the number of the + * option and 'onoff' is 0 (off) or non-0 (on). The value returned is given + * by the PNG_OPTION_ defines below. + * + * HARDWARE: normally hardware capabilites, such as the Intel SSE instructions, + * are detected at run time, however sometimes it may be impossible + * to do this in user mode, in which case it is necessary to discover + * the capabilities in an OS specific way. Such capabilities are + * listed here when libpng has support for them and must be turned + * ON by the application if present. + * + * SOFTWARE: sometimes software optimizations actually result in performance + * decrease on some architectures or systems, or with some sets of + * PNG images. 'Software' options allow such optimizations to be + * selected at run time. + */ +#ifdef PNG_SET_OPTION_SUPPORTED +#ifdef PNG_ARM_NEON_API_SUPPORTED +# define PNG_ARM_NEON 0 /* HARDWARE: ARM Neon SIMD instructions supported */ +#endif +#define PNG_OPTION_NEXT 2 /* Next option - numbers must be even */ + +/* Return values: NOTE: there are four values and 'off' is *not* zero */ +#define PNG_OPTION_UNSET 0 /* Unset - defaults to off */ +#define PNG_OPTION_INVALID 1 /* Option number out of range */ +#define PNG_OPTION_OFF 2 +#define PNG_OPTION_ON 3 + +PNG_EXPORT(244, int, png_set_option, (png_structrp png_ptr, int option, + int onoff)); +#endif + +/******************************************************************************* + * END OF HARDWARE OPTIONS + ******************************************************************************/ + +/* Maintainer: Put new public prototypes here ^, in libpng.3, and project + * defs, scripts/pnglibconf.h, and scripts/pnglibconf.h.prebuilt + */ + +/* The last ordinal number (this is the *last* one already used; the next + * one to use is one more than this.) Maintainer, remember to add an entry to + * scripts/symbols.def as well. + */ +#ifdef PNG_EXPORT_LAST_ORDINAL + PNG_EXPORT_LAST_ORDINAL(244); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PNG_VERSION_INFO_ONLY */ +/* Do not put anything past this line */ +#endif /* PNG_H */ diff --git a/src/SDL2/VisualC/external/include/pngconf.h b/src/SDL2/VisualC/external/include/pngconf.h new file mode 100755 index 000000000..31f996757 --- /dev/null +++ b/src/SDL2/VisualC/external/include/pngconf.h @@ -0,0 +1,616 @@ + +/* pngconf.h - machine configurable file for libpng + * + * libpng version 1.6.2 - April 25, 2013 + * + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + */ + +/* Any machine specific code is near the front of this file, so if you + * are configuring libpng for a machine, you may want to read the section + * starting here down to where it starts to typedef png_color, png_text, + * and png_info. + */ + +#ifndef PNGCONF_H +#define PNGCONF_H + +/* To do: Do all of this in scripts/pnglibconf.dfa */ +#ifdef PNG_SAFE_LIMITS_SUPPORTED +# ifdef PNG_USER_WIDTH_MAX +# undef PNG_USER_WIDTH_MAX +# define PNG_USER_WIDTH_MAX 1000000L +# endif +# ifdef PNG_USER_HEIGHT_MAX +# undef PNG_USER_HEIGHT_MAX +# define PNG_USER_HEIGHT_MAX 1000000L +# endif +# ifdef PNG_USER_CHUNK_MALLOC_MAX +# undef PNG_USER_CHUNK_MALLOC_MAX +# define PNG_USER_CHUNK_MALLOC_MAX 4000000L +# endif +# ifdef PNG_USER_CHUNK_CACHE_MAX +# undef PNG_USER_CHUNK_CACHE_MAX +# define PNG_USER_CHUNK_CACHE_MAX 128 +# endif +#endif + +#ifndef PNG_BUILDING_SYMBOL_TABLE /* else includes may cause problems */ + +/* From libpng 1.6.0 libpng requires an ANSI X3.159-1989 ("ISOC90") compliant C + * compiler for correct compilation. The following header files are required by + * the standard. If your compiler doesn't provide these header files, or they + * do not match the standard, you will need to provide/improve them. + */ +#include +#include + +/* Library header files. These header files are all defined by ISOC90; libpng + * expects conformant implementations, however, an ISOC90 conformant system need + * not provide these header files if the functionality cannot be implemented. + * In this case it will be necessary to disable the relevant parts of libpng in + * the build of pnglibconf.h. + * + * Prior to 1.6.0 string.h was included here; the API changes in 1.6.0 to not + * include this unnecessary header file. + */ + +#ifdef PNG_STDIO_SUPPORTED + /* Required for the definition of FILE: */ +# include +#endif + +#ifdef PNG_SETJMP_SUPPORTED + /* Required for the definition of jmp_buf and the declaration of longjmp: */ +# include +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED + /* Required for struct tm: */ +# include +#endif + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +/* Prior to 1.6.0 it was possible to turn off 'const' in declarations using + * PNG_NO_CONST; this is no longer supported except for data declarations which + * apparently still cause problems in 2011 on some compilers. + */ +#define PNG_CONST const /* backward compatibility only */ + +/* This controls optimization of the reading of 16 and 32 bit values + * from PNG files. It can be set on a per-app-file basis - it + * just changes whether a macro is used when the function is called. + * The library builder sets the default; if read functions are not + * built into the library the macro implementation is forced on. + */ +#ifndef PNG_READ_INT_FUNCTIONS_SUPPORTED +# define PNG_USE_READ_MACROS +#endif +#if !defined(PNG_NO_USE_READ_MACROS) && !defined(PNG_USE_READ_MACROS) +# if PNG_DEFAULT_READ_MACROS +# define PNG_USE_READ_MACROS +# endif +#endif + +/* COMPILER SPECIFIC OPTIONS. + * + * These options are provided so that a variety of difficult compilers + * can be used. Some are fixed at build time (e.g. PNG_API_RULE + * below) but still have compiler specific implementations, others + * may be changed on a per-file basis when compiling against libpng. + */ + +/* The PNGARG macro was used in versions of libpng prior to 1.6.0 to protect + * against legacy (pre ISOC90) compilers that did not understand function + * prototypes. It is not required for modern C compilers. + */ +#ifndef PNGARG +# define PNGARG(arglist) arglist +#endif + +/* Function calling conventions. + * ============================= + * Normally it is not necessary to specify to the compiler how to call + * a function - it just does it - however on x86 systems derived from + * Microsoft and Borland C compilers ('IBM PC', 'DOS', 'Windows' systems + * and some others) there are multiple ways to call a function and the + * default can be changed on the compiler command line. For this reason + * libpng specifies the calling convention of every exported function and + * every function called via a user supplied function pointer. This is + * done in this file by defining the following macros: + * + * PNGAPI Calling convention for exported functions. + * PNGCBAPI Calling convention for user provided (callback) functions. + * PNGCAPI Calling convention used by the ANSI-C library (required + * for longjmp callbacks and sometimes used internally to + * specify the calling convention for zlib). + * + * These macros should never be overridden. If it is necessary to + * change calling convention in a private build this can be done + * by setting PNG_API_RULE (which defaults to 0) to one of the values + * below to select the correct 'API' variants. + * + * PNG_API_RULE=0 Use PNGCAPI - the 'C' calling convention - throughout. + * This is correct in every known environment. + * PNG_API_RULE=1 Use the operating system convention for PNGAPI and + * the 'C' calling convention (from PNGCAPI) for + * callbacks (PNGCBAPI). This is no longer required + * in any known environment - if it has to be used + * please post an explanation of the problem to the + * libpng mailing list. + * + * These cases only differ if the operating system does not use the C + * calling convention, at present this just means the above cases + * (x86 DOS/Windows sytems) and, even then, this does not apply to + * Cygwin running on those systems. + * + * Note that the value must be defined in pnglibconf.h so that what + * the application uses to call the library matches the conventions + * set when building the library. + */ + +/* Symbol export + * ============= + * When building a shared library it is almost always necessary to tell + * the compiler which symbols to export. The png.h macro 'PNG_EXPORT' + * is used to mark the symbols. On some systems these symbols can be + * extracted at link time and need no special processing by the compiler, + * on other systems the symbols are flagged by the compiler and just + * the declaration requires a special tag applied (unfortunately) in a + * compiler dependent way. Some systems can do either. + * + * A small number of older systems also require a symbol from a DLL to + * be flagged to the program that calls it. This is a problem because + * we do not know in the header file included by application code that + * the symbol will come from a shared library, as opposed to a statically + * linked one. For this reason the application must tell us by setting + * the magic flag PNG_USE_DLL to turn on the special processing before + * it includes png.h. + * + * Four additional macros are used to make this happen: + * + * PNG_IMPEXP The magic (if any) to cause a symbol to be exported from + * the build or imported if PNG_USE_DLL is set - compiler + * and system specific. + * + * PNG_EXPORT_TYPE(type) A macro that pre or appends PNG_IMPEXP to + * 'type', compiler specific. + * + * PNG_DLL_EXPORT Set to the magic to use during a libpng build to + * make a symbol exported from the DLL. Not used in the + * public header files; see pngpriv.h for how it is used + * in the libpng build. + * + * PNG_DLL_IMPORT Set to the magic to force the libpng symbols to come + * from a DLL - used to define PNG_IMPEXP when + * PNG_USE_DLL is set. + */ + +/* System specific discovery. + * ========================== + * This code is used at build time to find PNG_IMPEXP, the API settings + * and PNG_EXPORT_TYPE(), it may also set a macro to indicate the DLL + * import processing is possible. On Windows systems it also sets + * compiler-specific macros to the values required to change the calling + * conventions of the various functions. + */ +#if defined(_Windows) || defined(_WINDOWS) || defined(WIN32) ||\ + defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) + /* Windows system (DOS doesn't support DLLs). Includes builds under Cygwin or + * MinGW on any architecture currently supported by Windows. Also includes + * Watcom builds but these need special treatment because they are not + * compatible with GCC or Visual C because of different calling conventions. + */ +# if PNG_API_RULE == 2 + /* If this line results in an error, either because __watcall is not + * understood or because of a redefine just below you cannot use *this* + * build of the library with the compiler you are using. *This* build was + * build using Watcom and applications must also be built using Watcom! + */ +# define PNGCAPI __watcall +# endif + +# if defined(__GNUC__) || (defined(_MSC_VER) && (_MSC_VER >= 800)) +# define PNGCAPI __cdecl +# if PNG_API_RULE == 1 + /* If this line results in an error __stdcall is not understood and + * PNG_API_RULE should not have been set to '1'. + */ +# define PNGAPI __stdcall +# endif +# else + /* An older compiler, or one not detected (erroneously) above, + * if necessary override on the command line to get the correct + * variants for the compiler. + */ +# ifndef PNGCAPI +# define PNGCAPI _cdecl +# endif +# if PNG_API_RULE == 1 && !defined(PNGAPI) +# define PNGAPI _stdcall +# endif +# endif /* compiler/api */ + /* NOTE: PNGCBAPI always defaults to PNGCAPI. */ + +# if defined(PNGAPI) && !defined(PNG_USER_PRIVATEBUILD) +# error "PNG_USER_PRIVATEBUILD must be defined if PNGAPI is changed" +# endif + +# if (defined(_MSC_VER) && _MSC_VER < 800) ||\ + (defined(__BORLANDC__) && __BORLANDC__ < 0x500) + /* older Borland and MSC + * compilers used '__export' and required this to be after + * the type. + */ +# ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) type PNG_IMPEXP +# endif +# define PNG_DLL_EXPORT __export +# else /* newer compiler */ +# define PNG_DLL_EXPORT __declspec(dllexport) +# ifndef PNG_DLL_IMPORT +# define PNG_DLL_IMPORT __declspec(dllimport) +# endif +# endif /* compiler */ + +#else /* !Windows */ +# if (defined(__IBMC__) || defined(__IBMCPP__)) && defined(__OS2__) +# define PNGAPI _System +# else /* !Windows/x86 && !OS/2 */ + /* Use the defaults, or define PNG*API on the command line (but + * this will have to be done for every compile!) + */ +# endif /* other system, !OS/2 */ +#endif /* !Windows/x86 */ + +/* Now do all the defaulting . */ +#ifndef PNGCAPI +# define PNGCAPI +#endif +#ifndef PNGCBAPI +# define PNGCBAPI PNGCAPI +#endif +#ifndef PNGAPI +# define PNGAPI PNGCAPI +#endif + +/* PNG_IMPEXP may be set on the compilation system command line or (if not set) + * then in an internal header file when building the library, otherwise (when + * using the library) it is set here. + */ +#ifndef PNG_IMPEXP +# if defined(PNG_USE_DLL) && defined(PNG_DLL_IMPORT) + /* This forces use of a DLL, disallowing static linking */ +# define PNG_IMPEXP PNG_DLL_IMPORT +# endif + +# ifndef PNG_IMPEXP +# define PNG_IMPEXP +# endif +#endif + +/* In 1.5.2 the definition of PNG_FUNCTION has been changed to always treat + * 'attributes' as a storage class - the attributes go at the start of the + * function definition, and attributes are always appended regardless of the + * compiler. This considerably simplifies these macros but may cause problems + * if any compilers both need function attributes and fail to handle them as + * a storage class (this is unlikely.) + */ +#ifndef PNG_FUNCTION +# define PNG_FUNCTION(type, name, args, attributes) attributes type name args +#endif + +#ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) PNG_IMPEXP type +#endif + + /* The ordinal value is only relevant when preprocessing png.h for symbol + * table entries, so we discard it here. See the .dfn files in the + * scripts directory. + */ +#ifndef PNG_EXPORTA + +# define PNG_EXPORTA(ordinal, type, name, args, attributes)\ + PNG_FUNCTION(PNG_EXPORT_TYPE(type),(PNGAPI name),PNGARG(args), \ + extern attributes) +#endif + +/* ANSI-C (C90) does not permit a macro to be invoked with an empty argument, + * so make something non-empty to satisfy the requirement: + */ +#define PNG_EMPTY /*empty list*/ + +#define PNG_EXPORT(ordinal, type, name, args)\ + PNG_EXPORTA(ordinal, type, name, args, PNG_EMPTY) + +/* Use PNG_REMOVED to comment out a removed interface. */ +#ifndef PNG_REMOVED +# define PNG_REMOVED(ordinal, type, name, args, attributes) +#endif + +#ifndef PNG_CALLBACK +# define PNG_CALLBACK(type, name, args) type (PNGCBAPI name) PNGARG(args) +#endif + +/* Support for compiler specific function attributes. These are used + * so that where compiler support is available incorrect use of API + * functions in png.h will generate compiler warnings. + * + * Added at libpng-1.2.41. + */ + +#ifndef PNG_NO_PEDANTIC_WARNINGS +# ifndef PNG_PEDANTIC_WARNINGS_SUPPORTED +# define PNG_PEDANTIC_WARNINGS_SUPPORTED +# endif +#endif + +#ifdef PNG_PEDANTIC_WARNINGS_SUPPORTED + /* Support for compiler specific function attributes. These are used + * so that where compiler support is available, incorrect use of API + * functions in png.h will generate compiler warnings. Added at libpng + * version 1.2.41. Disabling these removes the warnings but may also produce + * less efficient code. + */ +# if defined(__GNUC__) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# if __GNUC__ >= 3 +# ifndef PNG_ALLOCATED +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# ifndef PNG_PRIVATE +# if 0 /* Doesn't work so we use deprecated instead*/ +# define PNG_PRIVATE \ + __attribute__((warning("This function is not exported by libpng."))) +# else +# define PNG_PRIVATE \ + __attribute__((__deprecated__)) +# endif +# endif +# if ((__GNUC__ != 3) || !defined(__GNUC_MINOR__) || (__GNUC_MINOR__ >= 1)) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif /* __GNUC__ == 3.0 */ +# endif /* __GNUC__ >= 3 */ + +# elif defined(_MSC_VER) && (_MSC_VER >= 1300) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* not supported */ +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __declspec(noreturn) +# endif +# ifndef PNG_ALLOCATED +# if (_MSC_VER >= 1400) +# define PNG_ALLOCATED __declspec(restrict) +# endif +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __declspec(deprecated) +# endif +# ifndef PNG_PRIVATE +# define PNG_PRIVATE __declspec(deprecated) +# endif +# ifndef PNG_RESTRICT +# if (_MSC_VER >= 1400) +# define PNG_RESTRICT __restrict +# endif +# endif + +# elif defined(__WATCOMC__) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif /* _MSC_VER */ +#endif /* PNG_PEDANTIC_WARNINGS */ + +#ifndef PNG_DEPRECATED +# define PNG_DEPRECATED /* Use of this function is deprecated */ +#endif +#ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* The result of this function must be checked */ +#endif +#ifndef PNG_NORETURN +# define PNG_NORETURN /* This function does not return */ +#endif +#ifndef PNG_ALLOCATED +# define PNG_ALLOCATED /* The result of the function is new memory */ +#endif +#ifndef PNG_PRIVATE +# define PNG_PRIVATE /* This is a private libpng function */ +#endif +#ifndef PNG_RESTRICT +# define PNG_RESTRICT /* The C99 "restrict" feature */ +#endif +#ifndef PNG_FP_EXPORT /* A floating point API. */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +# define PNG_FP_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No floating point APIs */ +# define PNG_FP_EXPORT(ordinal, type, name, args) +# endif +#endif +#ifndef PNG_FIXED_EXPORT /* A fixed point API. */ +# ifdef PNG_FIXED_POINT_SUPPORTED +# define PNG_FIXED_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No fixed point APIs */ +# define PNG_FIXED_EXPORT(ordinal, type, name, args) +# endif +#endif + +#ifndef PNG_BUILDING_SYMBOL_TABLE +/* Some typedefs to get us started. These should be safe on most of the common + * platforms. + * + * png_uint_32 and png_int_32 may, currently, be larger than required to hold a + * 32-bit value however this is not normally advisable. + * + * png_uint_16 and png_int_16 should always be two bytes in size - this is + * verified at library build time. + * + * png_byte must always be one byte in size. + * + * The checks below use constants from limits.h, as defined by the ISOC90 + * standard. + */ +#if CHAR_BIT == 8 && UCHAR_MAX == 255 + typedef unsigned char png_byte; +#else +# error "libpng requires 8 bit bytes" +#endif + +#if INT_MIN == -32768 && INT_MAX == 32767 + typedef int png_int_16; +#elif SHRT_MIN == -32768 && SHRT_MAX == 32767 + typedef short png_int_16; +#else +# error "libpng requires a signed 16 bit type" +#endif + +#if UINT_MAX == 65535 + typedef unsigned int png_uint_16; +#elif USHRT_MAX == 65535 + typedef unsigned short png_uint_16; +#else +# error "libpng requires an unsigned 16 bit type" +#endif + +#if INT_MIN < -2147483646 && INT_MAX > 2147483646 + typedef int png_int_32; +#elif LONG_MIN < -2147483646 && LONG_MAX > 2147483646 + typedef long int png_int_32; +#else +# error "libpng requires a signed 32 bit (or more) type" +#endif + +#if UINT_MAX > 4294967294 + typedef unsigned int png_uint_32; +#elif ULONG_MAX > 4294967294 + typedef unsigned long int png_uint_32; +#else +# error "libpng requires an unsigned 32 bit (or more) type" +#endif + +/* Prior to 1.6.0 it was possible to disable the use of size_t, 1.6.0, however, + * requires an ISOC90 compiler and relies on consistent behavior of sizeof. + */ +typedef size_t png_size_t; +typedef ptrdiff_t png_ptrdiff_t; + +/* libpng needs to know the maximum value of 'size_t' and this controls the + * definition of png_alloc_size_t, below. This maximum value of size_t limits + * but does not control the maximum allocations the library makes - there is + * direct application control of this through png_set_user_limits(). + */ +#ifndef PNG_SMALL_SIZE_T + /* Compiler specific tests for systems where size_t is known to be less than + * 32 bits (some of these systems may no longer work because of the lack of + * 'far' support; see above.) + */ +# if (defined(__TURBOC__) && !defined(__FLAT__)) ||\ + (defined(_MSC_VER) && defined(MAXSEG_64K)) +# define PNG_SMALL_SIZE_T +# endif +#endif + +/* png_alloc_size_t is guaranteed to be no smaller than png_size_t, and no + * smaller than png_uint_32. Casts from png_size_t or png_uint_32 to + * png_alloc_size_t are not necessary; in fact, it is recommended not to use + * them at all so that the compiler can complain when something turns out to be + * problematic. + * + * Casts in the other direction (from png_alloc_size_t to png_size_t or + * png_uint_32) should be explicitly applied; however, we do not expect to + * encounter practical situations that require such conversions. + * + * PNG_SMALL_SIZE_T must be defined if the maximum value of size_t is less than + * 4294967295 - i.e. less than the maximum value of png_uint_32. + */ +#ifdef PNG_SMALL_SIZE_T + typedef png_uint_32 png_alloc_size_t; +#else + typedef png_size_t png_alloc_size_t; +#endif + +/* Prior to 1.6.0 libpng offered limited support for Microsoft C compiler + * implementations of Intel CPU specific support of user-mode segmented address + * spaces, where 16-bit pointers address more than 65536 bytes of memory using + * separate 'segment' registers. The implementation requires two different + * types of pointer (only one of which includes the segment value.) + * + * If required this support is available in version 1.2 of libpng and may be + * available in versions through 1.5, although the correctness of the code has + * not been verified recently. + */ + +/* Typedef for floating-point numbers that are converted to fixed-point with a + * multiple of 100,000, e.g., gamma + */ +typedef png_int_32 png_fixed_point; + +/* Add typedefs for pointers */ +typedef void * png_voidp; +typedef const void * png_const_voidp; +typedef png_byte * png_bytep; +typedef const png_byte * png_const_bytep; +typedef png_uint_32 * png_uint_32p; +typedef const png_uint_32 * png_const_uint_32p; +typedef png_int_32 * png_int_32p; +typedef const png_int_32 * png_const_int_32p; +typedef png_uint_16 * png_uint_16p; +typedef const png_uint_16 * png_const_uint_16p; +typedef png_int_16 * png_int_16p; +typedef const png_int_16 * png_const_int_16p; +typedef char * png_charp; +typedef const char * png_const_charp; +typedef png_fixed_point * png_fixed_point_p; +typedef const png_fixed_point * png_const_fixed_point_p; +typedef png_size_t * png_size_tp; +typedef const png_size_t * png_const_size_tp; + +#ifdef PNG_STDIO_SUPPORTED +typedef FILE * png_FILE_p; +#endif + +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * png_doublep; +typedef const double * png_const_doublep; +#endif + +/* Pointers to pointers; i.e. arrays */ +typedef png_byte * * png_bytepp; +typedef png_uint_32 * * png_uint_32pp; +typedef png_int_32 * * png_int_32pp; +typedef png_uint_16 * * png_uint_16pp; +typedef png_int_16 * * png_int_16pp; +typedef const char * * png_const_charpp; +typedef char * * png_charpp; +typedef png_fixed_point * * png_fixed_point_pp; +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * * png_doublepp; +#endif + +/* Pointers to pointers to pointers; i.e., pointer to array */ +typedef char * * * png_charppp; + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +#endif /* PNGCONF_H */ diff --git a/src/SDL2/VisualC/external/include/pnglibconf.h b/src/SDL2/VisualC/external/include/pnglibconf.h new file mode 100644 index 000000000..b4428fb6c --- /dev/null +++ b/src/SDL2/VisualC/external/include/pnglibconf.h @@ -0,0 +1,209 @@ +/* pnglibconf.h - library build configuration */ + +/* libpng version 1.6.2 - April 25, 2013 */ + +/* Copyright (c) 1998-2012 Glenn Randers-Pehrson */ + +/* This code is released under the libpng license. */ +/* For conditions of distribution and use, see the disclaimer */ +/* and license in png.h */ + +/* pnglibconf.h */ +/* Machine generated file: DO NOT EDIT */ +/* Derived from: scripts/pnglibconf.dfa */ +#ifndef PNGLCONF_H +#define PNGLCONF_H +/* options */ +#define PNG_16BIT_SUPPORTED +#define PNG_ALIGNED_MEMORY_SUPPORTED +/*#undef PNG_ARM_NEON_API_SUPPORTED*/ +/*#undef PNG_ARM_NEON_CHECK_SUPPORTED*/ +/*#undef PNG_ARM_NEON_SUPPORTED*/ +#define PNG_BENIGN_ERRORS_SUPPORTED +#define PNG_BENIGN_READ_ERRORS_SUPPORTED +/*#undef PNG_BENIGN_WRITE_ERRORS_SUPPORTED*/ +#define PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +#define PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_COLORSPACE_SUPPORTED +#define PNG_CONSOLE_IO_SUPPORTED +#define PNG_CONVERT_tIME_SUPPORTED +#define PNG_EASY_ACCESS_SUPPORTED +/*#undef PNG_ERROR_NUMBERS_SUPPORTED*/ +#define PNG_ERROR_TEXT_SUPPORTED +#define PNG_FIXED_POINT_SUPPORTED +#define PNG_FLOATING_ARITHMETIC_SUPPORTED +#define PNG_FLOATING_POINT_SUPPORTED +#define PNG_FORMAT_AFIRST_SUPPORTED +#define PNG_FORMAT_BGR_SUPPORTED +#define PNG_GAMMA_SUPPORTED +#define PNG_GET_PALETTE_MAX_SUPPORTED +#define PNG_HANDLE_AS_UNKNOWN_SUPPORTED +#define PNG_INCH_CONVERSIONS_SUPPORTED +#define PNG_INFO_IMAGE_SUPPORTED +#define PNG_IO_STATE_SUPPORTED +#define PNG_MNG_FEATURES_SUPPORTED +#define PNG_POINTER_INDEXING_SUPPORTED +#define PNG_PROGRESSIVE_READ_SUPPORTED +#define PNG_READ_16BIT_SUPPORTED +#define PNG_READ_ALPHA_MODE_SUPPORTED +#define PNG_READ_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_READ_BACKGROUND_SUPPORTED +#define PNG_READ_BGR_SUPPORTED +#define PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_READ_COMPOSITE_NODIV_SUPPORTED +#define PNG_READ_COMPRESSED_TEXT_SUPPORTED +#define PNG_READ_EXPAND_16_SUPPORTED +#define PNG_READ_EXPAND_SUPPORTED +#define PNG_READ_FILLER_SUPPORTED +#define PNG_READ_GAMMA_SUPPORTED +#define PNG_READ_GET_PALETTE_MAX_SUPPORTED +#define PNG_READ_GRAY_TO_RGB_SUPPORTED +#define PNG_READ_INTERLACING_SUPPORTED +#define PNG_READ_INT_FUNCTIONS_SUPPORTED +#define PNG_READ_INVERT_ALPHA_SUPPORTED +#define PNG_READ_INVERT_SUPPORTED +#define PNG_READ_OPT_PLTE_SUPPORTED +#define PNG_READ_PACKSWAP_SUPPORTED +#define PNG_READ_PACK_SUPPORTED +#define PNG_READ_QUANTIZE_SUPPORTED +#define PNG_READ_RGB_TO_GRAY_SUPPORTED +#define PNG_READ_SCALE_16_TO_8_SUPPORTED +#define PNG_READ_SHIFT_SUPPORTED +#define PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_STRIP_ALPHA_SUPPORTED +#define PNG_READ_SUPPORTED +#define PNG_READ_SWAP_ALPHA_SUPPORTED +#define PNG_READ_SWAP_SUPPORTED +#define PNG_READ_TEXT_SUPPORTED +#define PNG_READ_TRANSFORMS_SUPPORTED +#define PNG_READ_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_READ_USER_CHUNKS_SUPPORTED +#define PNG_READ_USER_TRANSFORM_SUPPORTED +#define PNG_READ_bKGD_SUPPORTED +#define PNG_READ_cHRM_SUPPORTED +#define PNG_READ_gAMA_SUPPORTED +#define PNG_READ_hIST_SUPPORTED +#define PNG_READ_iCCP_SUPPORTED +#define PNG_READ_iTXt_SUPPORTED +#define PNG_READ_oFFs_SUPPORTED +#define PNG_READ_pCAL_SUPPORTED +#define PNG_READ_pHYs_SUPPORTED +#define PNG_READ_sBIT_SUPPORTED +#define PNG_READ_sCAL_SUPPORTED +#define PNG_READ_sPLT_SUPPORTED +#define PNG_READ_sRGB_SUPPORTED +#define PNG_READ_tEXt_SUPPORTED +#define PNG_READ_tIME_SUPPORTED +#define PNG_READ_tRNS_SUPPORTED +#define PNG_READ_zTXt_SUPPORTED +/*#undef PNG_SAFE_LIMITS_SUPPORTED*/ +#define PNG_SAVE_INT_32_SUPPORTED +#define PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SEQUENTIAL_READ_SUPPORTED +#define PNG_SETJMP_SUPPORTED +#define PNG_SET_CHUNK_CACHE_LIMIT_SUPPORTED +#define PNG_SET_CHUNK_MALLOC_LIMIT_SUPPORTED +/*#undef PNG_SET_OPTION_SUPPORTED*/ +#define PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SET_USER_LIMITS_SUPPORTED +#define PNG_SIMPLIFIED_READ_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_READ_BGR_SUPPORTED +#define PNG_SIMPLIFIED_READ_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_BGR_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_SUPPORTED +#define PNG_STDIO_SUPPORTED +#define PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_TEXT_SUPPORTED +#define PNG_TIME_RFC1123_SUPPORTED +#define PNG_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_USER_CHUNKS_SUPPORTED +#define PNG_USER_LIMITS_SUPPORTED +#define PNG_USER_MEM_SUPPORTED +#define PNG_USER_TRANSFORM_INFO_SUPPORTED +#define PNG_USER_TRANSFORM_PTR_SUPPORTED +#define PNG_WARNINGS_SUPPORTED +#define PNG_WRITE_16BIT_SUPPORTED +#define PNG_WRITE_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_WRITE_BGR_SUPPORTED +#define PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_WRITE_COMPRESSED_TEXT_SUPPORTED +#define PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +#define PNG_WRITE_FILLER_SUPPORTED +#define PNG_WRITE_FILTER_SUPPORTED +#define PNG_WRITE_FLUSH_SUPPORTED +#define PNG_WRITE_GET_PALETTE_MAX_SUPPORTED +#define PNG_WRITE_INTERLACING_SUPPORTED +#define PNG_WRITE_INT_FUNCTIONS_SUPPORTED +#define PNG_WRITE_INVERT_ALPHA_SUPPORTED +#define PNG_WRITE_INVERT_SUPPORTED +#define PNG_WRITE_OPTIMIZE_CMF_SUPPORTED +#define PNG_WRITE_PACKSWAP_SUPPORTED +#define PNG_WRITE_PACK_SUPPORTED +#define PNG_WRITE_SHIFT_SUPPORTED +#define PNG_WRITE_SUPPORTED +#define PNG_WRITE_SWAP_ALPHA_SUPPORTED +#define PNG_WRITE_SWAP_SUPPORTED +#define PNG_WRITE_TEXT_SUPPORTED +#define PNG_WRITE_TRANSFORMS_SUPPORTED +#define PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_WRITE_USER_TRANSFORM_SUPPORTED +#define PNG_WRITE_WEIGHTED_FILTER_SUPPORTED +#define PNG_WRITE_bKGD_SUPPORTED +#define PNG_WRITE_cHRM_SUPPORTED +#define PNG_WRITE_gAMA_SUPPORTED +#define PNG_WRITE_hIST_SUPPORTED +#define PNG_WRITE_iCCP_SUPPORTED +#define PNG_WRITE_iTXt_SUPPORTED +#define PNG_WRITE_oFFs_SUPPORTED +#define PNG_WRITE_pCAL_SUPPORTED +#define PNG_WRITE_pHYs_SUPPORTED +#define PNG_WRITE_sBIT_SUPPORTED +#define PNG_WRITE_sCAL_SUPPORTED +#define PNG_WRITE_sPLT_SUPPORTED +#define PNG_WRITE_sRGB_SUPPORTED +#define PNG_WRITE_tEXt_SUPPORTED +#define PNG_WRITE_tIME_SUPPORTED +#define PNG_WRITE_tRNS_SUPPORTED +#define PNG_WRITE_zTXt_SUPPORTED +#define PNG_bKGD_SUPPORTED +#define PNG_cHRM_SUPPORTED +#define PNG_gAMA_SUPPORTED +#define PNG_hIST_SUPPORTED +#define PNG_iCCP_SUPPORTED +#define PNG_iTXt_SUPPORTED +#define PNG_oFFs_SUPPORTED +#define PNG_pCAL_SUPPORTED +#define PNG_pHYs_SUPPORTED +#define PNG_sBIT_SUPPORTED +#define PNG_sCAL_SUPPORTED +#define PNG_sPLT_SUPPORTED +#define PNG_sRGB_SUPPORTED +#define PNG_tEXt_SUPPORTED +#define PNG_tIME_SUPPORTED +#define PNG_tRNS_SUPPORTED +#define PNG_zTXt_SUPPORTED +/* end of options */ +/* settings */ +#define PNG_API_RULE 0 +#define PNG_CALLOC_SUPPORTED +#define PNG_COST_SHIFT 3 +#define PNG_DEFAULT_READ_MACROS 1 +#define PNG_GAMMA_THRESHOLD_FIXED 5000 +#define PNG_IDAT_READ_SIZE PNG_ZBUF_SIZE +#define PNG_INFLATE_BUF_SIZE 1024 +#define PNG_MAX_GAMMA_8 11 +#define PNG_QUANTIZE_BLUE_BITS 5 +#define PNG_QUANTIZE_GREEN_BITS 5 +#define PNG_QUANTIZE_RED_BITS 5 +#define PNG_TEXT_Z_DEFAULT_COMPRESSION (-1) +#define PNG_TEXT_Z_DEFAULT_STRATEGY 0 +#define PNG_WEIGHT_SHIFT 8 +#define PNG_ZBUF_SIZE 8192 +#define PNG_Z_DEFAULT_COMPRESSION (-1) +#define PNG_Z_DEFAULT_NOFILTER_STRATEGY 0 +#define PNG_Z_DEFAULT_STRATEGY 1 +#define PNG_sCAL_PRECISION 5 +#define PNG_sRGB_PROFILE_CHECKS 2 +/* end of settings */ +#endif /* PNGLCONF_H */ diff --git a/src/SDL2/VisualC/external/include/tiff.h b/src/SDL2/VisualC/external/include/tiff.h new file mode 100755 index 000000000..19b4e7976 --- /dev/null +++ b/src/SDL2/VisualC/external/include/tiff.h @@ -0,0 +1,678 @@ +/* $Id: tiff.h,v 1.68 2012-08-19 16:56:35 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _TIFF_ +#define _TIFF_ + +#include "tiffconf.h" + +/* + * Tag Image File Format (TIFF) + * + * Based on Rev 6.0 from: + * Developer's Desk + * Aldus Corporation + * 411 First Ave. South + * Suite 200 + * Seattle, WA 98104 + * 206-622-5500 + * + * (http://partners.adobe.com/asn/developer/PDFS/TN/TIFF6.pdf) + * + * For BigTIFF design notes see the following links + * http://www.remotesensing.org/libtiff/bigtiffdesign.html + * http://www.awaresystems.be/imaging/tiff/bigtiff.html + */ + +#define TIFF_VERSION_CLASSIC 42 +#define TIFF_VERSION_BIG 43 + +#define TIFF_BIGENDIAN 0x4d4d +#define TIFF_LITTLEENDIAN 0x4949 +#define MDI_LITTLEENDIAN 0x5045 +#define MDI_BIGENDIAN 0x4550 + +/* + * Intrinsic data types required by the file format: + * + * 8-bit quantities int8/uint8 + * 16-bit quantities int16/uint16 + * 32-bit quantities int32/uint32 + * 64-bit quantities int64/uint64 + * strings unsigned char* + */ + +typedef TIFF_INT8_T int8; +typedef TIFF_UINT8_T uint8; + +typedef TIFF_INT16_T int16; +typedef TIFF_UINT16_T uint16; + +typedef TIFF_INT32_T int32; +typedef TIFF_UINT32_T uint32; + +typedef TIFF_INT64_T int64; +typedef TIFF_UINT64_T uint64; + +/* + * Some types as promoted in a variable argument list + * We use uint16_vap rather then directly using int, because this way + * we document the type we actually want to pass through, conceptually, + * rather then confusing the issue by merely stating the type it gets + * promoted to + */ + +typedef int uint16_vap; + +/* + * TIFF header. + */ +typedef struct { + uint16 tiff_magic; /* magic number (defines byte order) */ + uint16 tiff_version; /* TIFF version number */ +} TIFFHeaderCommon; +typedef struct { + uint16 tiff_magic; /* magic number (defines byte order) */ + uint16 tiff_version; /* TIFF version number */ + uint32 tiff_diroff; /* byte offset to first directory */ +} TIFFHeaderClassic; +typedef struct { + uint16 tiff_magic; /* magic number (defines byte order) */ + uint16 tiff_version; /* TIFF version number */ + uint16 tiff_offsetsize; /* size of offsets, should be 8 */ + uint16 tiff_unused; /* unused word, should be 0 */ + uint64 tiff_diroff; /* byte offset to first directory */ +} TIFFHeaderBig; + + +/* + * NB: In the comments below, + * - items marked with a + are obsoleted by revision 5.0, + * - items marked with a ! are introduced in revision 6.0. + * - items marked with a % are introduced post revision 6.0. + * - items marked with a $ are obsoleted by revision 6.0. + * - items marked with a & are introduced by Adobe DNG specification. + */ + +/* + * Tag data type information. + * + * Note: RATIONALs are the ratio of two 32-bit integer values. + */ +typedef enum { + TIFF_NOTYPE = 0, /* placeholder */ + TIFF_BYTE = 1, /* 8-bit unsigned integer */ + TIFF_ASCII = 2, /* 8-bit bytes w/ last byte null */ + TIFF_SHORT = 3, /* 16-bit unsigned integer */ + TIFF_LONG = 4, /* 32-bit unsigned integer */ + TIFF_RATIONAL = 5, /* 64-bit unsigned fraction */ + TIFF_SBYTE = 6, /* !8-bit signed integer */ + TIFF_UNDEFINED = 7, /* !8-bit untyped data */ + TIFF_SSHORT = 8, /* !16-bit signed integer */ + TIFF_SLONG = 9, /* !32-bit signed integer */ + TIFF_SRATIONAL = 10, /* !64-bit signed fraction */ + TIFF_FLOAT = 11, /* !32-bit IEEE floating point */ + TIFF_DOUBLE = 12, /* !64-bit IEEE floating point */ + TIFF_IFD = 13, /* %32-bit unsigned integer (offset) */ + TIFF_LONG8 = 16, /* BigTIFF 64-bit unsigned integer */ + TIFF_SLONG8 = 17, /* BigTIFF 64-bit signed integer */ + TIFF_IFD8 = 18 /* BigTIFF 64-bit unsigned integer (offset) */ +} TIFFDataType; + +/* + * TIFF Tag Definitions. + */ +#define TIFFTAG_SUBFILETYPE 254 /* subfile data descriptor */ +#define FILETYPE_REDUCEDIMAGE 0x1 /* reduced resolution version */ +#define FILETYPE_PAGE 0x2 /* one page of many */ +#define FILETYPE_MASK 0x4 /* transparency mask */ +#define TIFFTAG_OSUBFILETYPE 255 /* +kind of data in subfile */ +#define OFILETYPE_IMAGE 1 /* full resolution image data */ +#define OFILETYPE_REDUCEDIMAGE 2 /* reduced size image data */ +#define OFILETYPE_PAGE 3 /* one page of many */ +#define TIFFTAG_IMAGEWIDTH 256 /* image width in pixels */ +#define TIFFTAG_IMAGELENGTH 257 /* image height in pixels */ +#define TIFFTAG_BITSPERSAMPLE 258 /* bits per channel (sample) */ +#define TIFFTAG_COMPRESSION 259 /* data compression technique */ +#define COMPRESSION_NONE 1 /* dump mode */ +#define COMPRESSION_CCITTRLE 2 /* CCITT modified Huffman RLE */ +#define COMPRESSION_CCITTFAX3 3 /* CCITT Group 3 fax encoding */ +#define COMPRESSION_CCITT_T4 3 /* CCITT T.4 (TIFF 6 name) */ +#define COMPRESSION_CCITTFAX4 4 /* CCITT Group 4 fax encoding */ +#define COMPRESSION_CCITT_T6 4 /* CCITT T.6 (TIFF 6 name) */ +#define COMPRESSION_LZW 5 /* Lempel-Ziv & Welch */ +#define COMPRESSION_OJPEG 6 /* !6.0 JPEG */ +#define COMPRESSION_JPEG 7 /* %JPEG DCT compression */ +#define COMPRESSION_T85 9 /* !TIFF/FX T.85 JBIG compression */ +#define COMPRESSION_T43 10 /* !TIFF/FX T.43 colour by layered JBIG compression */ +#define COMPRESSION_NEXT 32766 /* NeXT 2-bit RLE */ +#define COMPRESSION_CCITTRLEW 32771 /* #1 w/ word alignment */ +#define COMPRESSION_PACKBITS 32773 /* Macintosh RLE */ +#define COMPRESSION_THUNDERSCAN 32809 /* ThunderScan RLE */ +/* codes 32895-32898 are reserved for ANSI IT8 TIFF/IT */ +#define COMPRESSION_DCS 32947 /* Kodak DCS encoding */ +#define COMPRESSION_JBIG 34661 /* ISO JBIG */ +#define COMPRESSION_SGILOG 34676 /* SGI Log Luminance RLE */ +#define COMPRESSION_SGILOG24 34677 /* SGI Log 24-bit packed */ +#define COMPRESSION_JP2000 34712 /* Leadtools JPEG2000 */ +#define COMPRESSION_LZMA 34925 /* LZMA2 */ +#define TIFFTAG_PHOTOMETRIC 262 /* photometric interpretation */ +#define PHOTOMETRIC_MINISWHITE 0 /* min value is white */ +#define PHOTOMETRIC_MINISBLACK 1 /* min value is black */ +#define PHOTOMETRIC_RGB 2 /* RGB color model */ +#define PHOTOMETRIC_PALETTE 3 /* color map indexed */ +#define PHOTOMETRIC_MASK 4 /* $holdout mask */ +#define PHOTOMETRIC_SEPARATED 5 /* !color separations */ +#define PHOTOMETRIC_YCBCR 6 /* !CCIR 601 */ +#define PHOTOMETRIC_CIELAB 8 /* !1976 CIE L*a*b* */ +#define PHOTOMETRIC_ICCLAB 9 /* ICC L*a*b* [Adobe TIFF Technote 4] */ +#define PHOTOMETRIC_ITULAB 10 /* ITU L*a*b* */ +#define PHOTOMETRIC_LOGL 32844 /* CIE Log2(L) */ +#define PHOTOMETRIC_LOGLUV 32845 /* CIE Log2(L) (u',v') */ +#define TIFFTAG_THRESHHOLDING 263 /* +thresholding used on data */ +#define THRESHHOLD_BILEVEL 1 /* b&w art scan */ +#define THRESHHOLD_HALFTONE 2 /* or dithered scan */ +#define THRESHHOLD_ERRORDIFFUSE 3 /* usually floyd-steinberg */ +#define TIFFTAG_CELLWIDTH 264 /* +dithering matrix width */ +#define TIFFTAG_CELLLENGTH 265 /* +dithering matrix height */ +#define TIFFTAG_FILLORDER 266 /* data order within a byte */ +#define FILLORDER_MSB2LSB 1 /* most significant -> least */ +#define FILLORDER_LSB2MSB 2 /* least significant -> most */ +#define TIFFTAG_DOCUMENTNAME 269 /* name of doc. image is from */ +#define TIFFTAG_IMAGEDESCRIPTION 270 /* info about image */ +#define TIFFTAG_MAKE 271 /* scanner manufacturer name */ +#define TIFFTAG_MODEL 272 /* scanner model name/number */ +#define TIFFTAG_STRIPOFFSETS 273 /* offsets to data strips */ +#define TIFFTAG_ORIENTATION 274 /* +image orientation */ +#define ORIENTATION_TOPLEFT 1 /* row 0 top, col 0 lhs */ +#define ORIENTATION_TOPRIGHT 2 /* row 0 top, col 0 rhs */ +#define ORIENTATION_BOTRIGHT 3 /* row 0 bottom, col 0 rhs */ +#define ORIENTATION_BOTLEFT 4 /* row 0 bottom, col 0 lhs */ +#define ORIENTATION_LEFTTOP 5 /* row 0 lhs, col 0 top */ +#define ORIENTATION_RIGHTTOP 6 /* row 0 rhs, col 0 top */ +#define ORIENTATION_RIGHTBOT 7 /* row 0 rhs, col 0 bottom */ +#define ORIENTATION_LEFTBOT 8 /* row 0 lhs, col 0 bottom */ +#define TIFFTAG_SAMPLESPERPIXEL 277 /* samples per pixel */ +#define TIFFTAG_ROWSPERSTRIP 278 /* rows per strip of data */ +#define TIFFTAG_STRIPBYTECOUNTS 279 /* bytes counts for strips */ +#define TIFFTAG_MINSAMPLEVALUE 280 /* +minimum sample value */ +#define TIFFTAG_MAXSAMPLEVALUE 281 /* +maximum sample value */ +#define TIFFTAG_XRESOLUTION 282 /* pixels/resolution in x */ +#define TIFFTAG_YRESOLUTION 283 /* pixels/resolution in y */ +#define TIFFTAG_PLANARCONFIG 284 /* storage organization */ +#define PLANARCONFIG_CONTIG 1 /* single image plane */ +#define PLANARCONFIG_SEPARATE 2 /* separate planes of data */ +#define TIFFTAG_PAGENAME 285 /* page name image is from */ +#define TIFFTAG_XPOSITION 286 /* x page offset of image lhs */ +#define TIFFTAG_YPOSITION 287 /* y page offset of image lhs */ +#define TIFFTAG_FREEOFFSETS 288 /* +byte offset to free block */ +#define TIFFTAG_FREEBYTECOUNTS 289 /* +sizes of free blocks */ +#define TIFFTAG_GRAYRESPONSEUNIT 290 /* $gray scale curve accuracy */ +#define GRAYRESPONSEUNIT_10S 1 /* tenths of a unit */ +#define GRAYRESPONSEUNIT_100S 2 /* hundredths of a unit */ +#define GRAYRESPONSEUNIT_1000S 3 /* thousandths of a unit */ +#define GRAYRESPONSEUNIT_10000S 4 /* ten-thousandths of a unit */ +#define GRAYRESPONSEUNIT_100000S 5 /* hundred-thousandths */ +#define TIFFTAG_GRAYRESPONSECURVE 291 /* $gray scale response curve */ +#define TIFFTAG_GROUP3OPTIONS 292 /* 32 flag bits */ +#define TIFFTAG_T4OPTIONS 292 /* TIFF 6.0 proper name alias */ +#define GROUP3OPT_2DENCODING 0x1 /* 2-dimensional coding */ +#define GROUP3OPT_UNCOMPRESSED 0x2 /* data not compressed */ +#define GROUP3OPT_FILLBITS 0x4 /* fill to byte boundary */ +#define TIFFTAG_GROUP4OPTIONS 293 /* 32 flag bits */ +#define TIFFTAG_T6OPTIONS 293 /* TIFF 6.0 proper name */ +#define GROUP4OPT_UNCOMPRESSED 0x2 /* data not compressed */ +#define TIFFTAG_RESOLUTIONUNIT 296 /* units of resolutions */ +#define RESUNIT_NONE 1 /* no meaningful units */ +#define RESUNIT_INCH 2 /* english */ +#define RESUNIT_CENTIMETER 3 /* metric */ +#define TIFFTAG_PAGENUMBER 297 /* page numbers of multi-page */ +#define TIFFTAG_COLORRESPONSEUNIT 300 /* $color curve accuracy */ +#define COLORRESPONSEUNIT_10S 1 /* tenths of a unit */ +#define COLORRESPONSEUNIT_100S 2 /* hundredths of a unit */ +#define COLORRESPONSEUNIT_1000S 3 /* thousandths of a unit */ +#define COLORRESPONSEUNIT_10000S 4 /* ten-thousandths of a unit */ +#define COLORRESPONSEUNIT_100000S 5 /* hundred-thousandths */ +#define TIFFTAG_TRANSFERFUNCTION 301 /* !colorimetry info */ +#define TIFFTAG_SOFTWARE 305 /* name & release */ +#define TIFFTAG_DATETIME 306 /* creation date and time */ +#define TIFFTAG_ARTIST 315 /* creator of image */ +#define TIFFTAG_HOSTCOMPUTER 316 /* machine where created */ +#define TIFFTAG_PREDICTOR 317 /* prediction scheme w/ LZW */ +#define PREDICTOR_NONE 1 /* no prediction scheme used */ +#define PREDICTOR_HORIZONTAL 2 /* horizontal differencing */ +#define PREDICTOR_FLOATINGPOINT 3 /* floating point predictor */ +#define TIFFTAG_WHITEPOINT 318 /* image white point */ +#define TIFFTAG_PRIMARYCHROMATICITIES 319 /* !primary chromaticities */ +#define TIFFTAG_COLORMAP 320 /* RGB map for pallette image */ +#define TIFFTAG_HALFTONEHINTS 321 /* !highlight+shadow info */ +#define TIFFTAG_TILEWIDTH 322 /* !tile width in pixels */ +#define TIFFTAG_TILELENGTH 323 /* !tile height in pixels */ +#define TIFFTAG_TILEOFFSETS 324 /* !offsets to data tiles */ +#define TIFFTAG_TILEBYTECOUNTS 325 /* !byte counts for tiles */ +#define TIFFTAG_BADFAXLINES 326 /* lines w/ wrong pixel count */ +#define TIFFTAG_CLEANFAXDATA 327 /* regenerated line info */ +#define CLEANFAXDATA_CLEAN 0 /* no errors detected */ +#define CLEANFAXDATA_REGENERATED 1 /* receiver regenerated lines */ +#define CLEANFAXDATA_UNCLEAN 2 /* uncorrected errors exist */ +#define TIFFTAG_CONSECUTIVEBADFAXLINES 328 /* max consecutive bad lines */ +#define TIFFTAG_SUBIFD 330 /* subimage descriptors */ +#define TIFFTAG_INKSET 332 /* !inks in separated image */ +#define INKSET_CMYK 1 /* !cyan-magenta-yellow-black color */ +#define INKSET_MULTIINK 2 /* !multi-ink or hi-fi color */ +#define TIFFTAG_INKNAMES 333 /* !ascii names of inks */ +#define TIFFTAG_NUMBEROFINKS 334 /* !number of inks */ +#define TIFFTAG_DOTRANGE 336 /* !0% and 100% dot codes */ +#define TIFFTAG_TARGETPRINTER 337 /* !separation target */ +#define TIFFTAG_EXTRASAMPLES 338 /* !info about extra samples */ +#define EXTRASAMPLE_UNSPECIFIED 0 /* !unspecified data */ +#define EXTRASAMPLE_ASSOCALPHA 1 /* !associated alpha data */ +#define EXTRASAMPLE_UNASSALPHA 2 /* !unassociated alpha data */ +#define TIFFTAG_SAMPLEFORMAT 339 /* !data sample format */ +#define SAMPLEFORMAT_UINT 1 /* !unsigned integer data */ +#define SAMPLEFORMAT_INT 2 /* !signed integer data */ +#define SAMPLEFORMAT_IEEEFP 3 /* !IEEE floating point data */ +#define SAMPLEFORMAT_VOID 4 /* !untyped data */ +#define SAMPLEFORMAT_COMPLEXINT 5 /* !complex signed int */ +#define SAMPLEFORMAT_COMPLEXIEEEFP 6 /* !complex ieee floating */ +#define TIFFTAG_SMINSAMPLEVALUE 340 /* !variable MinSampleValue */ +#define TIFFTAG_SMAXSAMPLEVALUE 341 /* !variable MaxSampleValue */ +#define TIFFTAG_CLIPPATH 343 /* %ClipPath + [Adobe TIFF technote 2] */ +#define TIFFTAG_XCLIPPATHUNITS 344 /* %XClipPathUnits + [Adobe TIFF technote 2] */ +#define TIFFTAG_YCLIPPATHUNITS 345 /* %YClipPathUnits + [Adobe TIFF technote 2] */ +#define TIFFTAG_INDEXED 346 /* %Indexed + [Adobe TIFF Technote 3] */ +#define TIFFTAG_JPEGTABLES 347 /* %JPEG table stream */ +#define TIFFTAG_OPIPROXY 351 /* %OPI Proxy [Adobe TIFF technote] */ +/* Tags 400-435 are from the TIFF/FX spec */ +#define TIFFTAG_GLOBALPARAMETERSIFD 400 /* ! */ +#define TIFFTAG_PROFILETYPE 401 /* ! */ +#define PROFILETYPE_UNSPECIFIED 0 /* ! */ +#define PROFILETYPE_G3_FAX 1 /* ! */ +#define TIFFTAG_FAXPROFILE 402 /* ! */ +#define FAXPROFILE_S 1 /* !TIFF/FX FAX profile S */ +#define FAXPROFILE_F 2 /* !TIFF/FX FAX profile F */ +#define FAXPROFILE_J 3 /* !TIFF/FX FAX profile J */ +#define FAXPROFILE_C 4 /* !TIFF/FX FAX profile C */ +#define FAXPROFILE_L 5 /* !TIFF/FX FAX profile L */ +#define FAXPROFILE_M 6 /* !TIFF/FX FAX profile LM */ +#define TIFFTAG_CODINGMETHODS 403 /* !TIFF/FX coding methods */ +#define CODINGMETHODS_T4_1D (1 << 1) /* !T.4 1D */ +#define CODINGMETHODS_T4_2D (1 << 2) /* !T.4 2D */ +#define CODINGMETHODS_T6 (1 << 3) /* !T.6 */ +#define CODINGMETHODS_T85 (1 << 4) /* !T.85 JBIG */ +#define CODINGMETHODS_T42 (1 << 5) /* !T.42 JPEG */ +#define CODINGMETHODS_T43 (1 << 6) /* !T.43 colour by layered JBIG */ +#define TIFFTAG_VERSIONYEAR 404 /* !TIFF/FX version year */ +#define TIFFTAG_MODENUMBER 405 /* !TIFF/FX mode number */ +#define TIFFTAG_DECODE 433 /* !TIFF/FX decode */ +#define TIFFTAG_IMAGEBASECOLOR 434 /* !TIFF/FX image base colour */ +#define TIFFTAG_T82OPTIONS 435 /* !TIFF/FX T.82 options */ +/* + * Tags 512-521 are obsoleted by Technical Note #2 which specifies a + * revised JPEG-in-TIFF scheme. + */ +#define TIFFTAG_JPEGPROC 512 /* !JPEG processing algorithm */ +#define JPEGPROC_BASELINE 1 /* !baseline sequential */ +#define JPEGPROC_LOSSLESS 14 /* !Huffman coded lossless */ +#define TIFFTAG_JPEGIFOFFSET 513 /* !pointer to SOI marker */ +#define TIFFTAG_JPEGIFBYTECOUNT 514 /* !JFIF stream length */ +#define TIFFTAG_JPEGRESTARTINTERVAL 515 /* !restart interval length */ +#define TIFFTAG_JPEGLOSSLESSPREDICTORS 517 /* !lossless proc predictor */ +#define TIFFTAG_JPEGPOINTTRANSFORM 518 /* !lossless point transform */ +#define TIFFTAG_JPEGQTABLES 519 /* !Q matrice offsets */ +#define TIFFTAG_JPEGDCTABLES 520 /* !DCT table offsets */ +#define TIFFTAG_JPEGACTABLES 521 /* !AC coefficient offsets */ +#define TIFFTAG_YCBCRCOEFFICIENTS 529 /* !RGB -> YCbCr transform */ +#define TIFFTAG_YCBCRSUBSAMPLING 530 /* !YCbCr subsampling factors */ +#define TIFFTAG_YCBCRPOSITIONING 531 /* !subsample positioning */ +#define YCBCRPOSITION_CENTERED 1 /* !as in PostScript Level 2 */ +#define YCBCRPOSITION_COSITED 2 /* !as in CCIR 601-1 */ +#define TIFFTAG_REFERENCEBLACKWHITE 532 /* !colorimetry info */ +#define TIFFTAG_STRIPROWCOUNTS 559 /* !TIFF/FX strip row counts */ +#define TIFFTAG_XMLPACKET 700 /* %XML packet + [Adobe XMP Specification, + January 2004 */ +#define TIFFTAG_OPIIMAGEID 32781 /* %OPI ImageID + [Adobe TIFF technote] */ +/* tags 32952-32956 are private tags registered to Island Graphics */ +#define TIFFTAG_REFPTS 32953 /* image reference points */ +#define TIFFTAG_REGIONTACKPOINT 32954 /* region-xform tack point */ +#define TIFFTAG_REGIONWARPCORNERS 32955 /* warp quadrilateral */ +#define TIFFTAG_REGIONAFFINE 32956 /* affine transformation mat */ +/* tags 32995-32999 are private tags registered to SGI */ +#define TIFFTAG_MATTEING 32995 /* $use ExtraSamples */ +#define TIFFTAG_DATATYPE 32996 /* $use SampleFormat */ +#define TIFFTAG_IMAGEDEPTH 32997 /* z depth of image */ +#define TIFFTAG_TILEDEPTH 32998 /* z depth/data tile */ +/* tags 33300-33309 are private tags registered to Pixar */ +/* + * TIFFTAG_PIXAR_IMAGEFULLWIDTH and TIFFTAG_PIXAR_IMAGEFULLLENGTH + * are set when an image has been cropped out of a larger image. + * They reflect the size of the original uncropped image. + * The TIFFTAG_XPOSITION and TIFFTAG_YPOSITION can be used + * to determine the position of the smaller image in the larger one. + */ +#define TIFFTAG_PIXAR_IMAGEFULLWIDTH 33300 /* full image size in x */ +#define TIFFTAG_PIXAR_IMAGEFULLLENGTH 33301 /* full image size in y */ + /* Tags 33302-33306 are used to identify special image modes and data + * used by Pixar's texture formats. + */ +#define TIFFTAG_PIXAR_TEXTUREFORMAT 33302 /* texture map format */ +#define TIFFTAG_PIXAR_WRAPMODES 33303 /* s & t wrap modes */ +#define TIFFTAG_PIXAR_FOVCOT 33304 /* cotan(fov) for env. maps */ +#define TIFFTAG_PIXAR_MATRIX_WORLDTOSCREEN 33305 +#define TIFFTAG_PIXAR_MATRIX_WORLDTOCAMERA 33306 +/* tag 33405 is a private tag registered to Eastman Kodak */ +#define TIFFTAG_WRITERSERIALNUMBER 33405 /* device serial number */ +/* tag 33432 is listed in the 6.0 spec w/ unknown ownership */ +#define TIFFTAG_COPYRIGHT 33432 /* copyright string */ +/* IPTC TAG from RichTIFF specifications */ +#define TIFFTAG_RICHTIFFIPTC 33723 +/* 34016-34029 are reserved for ANSI IT8 TIFF/IT */ +#define TIFFTAG_STONITS 37439 /* Sample value to Nits */ +/* tag 34929 is a private tag registered to FedEx */ +#define TIFFTAG_FEDEX_EDR 34929 /* unknown use */ +#define TIFFTAG_INTEROPERABILITYIFD 40965 /* Pointer to Interoperability private directory */ +/* Adobe Digital Negative (DNG) format tags */ +#define TIFFTAG_DNGVERSION 50706 /* &DNG version number */ +#define TIFFTAG_DNGBACKWARDVERSION 50707 /* &DNG compatibility version */ +#define TIFFTAG_UNIQUECAMERAMODEL 50708 /* &name for the camera model */ +#define TIFFTAG_LOCALIZEDCAMERAMODEL 50709 /* &localized camera model + name */ +#define TIFFTAG_CFAPLANECOLOR 50710 /* &CFAPattern->LinearRaw space + mapping */ +#define TIFFTAG_CFALAYOUT 50711 /* &spatial layout of the CFA */ +#define TIFFTAG_LINEARIZATIONTABLE 50712 /* &lookup table description */ +#define TIFFTAG_BLACKLEVELREPEATDIM 50713 /* &repeat pattern size for + the BlackLevel tag */ +#define TIFFTAG_BLACKLEVEL 50714 /* &zero light encoding level */ +#define TIFFTAG_BLACKLEVELDELTAH 50715 /* &zero light encoding level + differences (columns) */ +#define TIFFTAG_BLACKLEVELDELTAV 50716 /* &zero light encoding level + differences (rows) */ +#define TIFFTAG_WHITELEVEL 50717 /* &fully saturated encoding + level */ +#define TIFFTAG_DEFAULTSCALE 50718 /* &default scale factors */ +#define TIFFTAG_DEFAULTCROPORIGIN 50719 /* &origin of the final image + area */ +#define TIFFTAG_DEFAULTCROPSIZE 50720 /* &size of the final image + area */ +#define TIFFTAG_COLORMATRIX1 50721 /* &XYZ->reference color space + transformation matrix 1 */ +#define TIFFTAG_COLORMATRIX2 50722 /* &XYZ->reference color space + transformation matrix 2 */ +#define TIFFTAG_CAMERACALIBRATION1 50723 /* &calibration matrix 1 */ +#define TIFFTAG_CAMERACALIBRATION2 50724 /* &calibration matrix 2 */ +#define TIFFTAG_REDUCTIONMATRIX1 50725 /* &dimensionality reduction + matrix 1 */ +#define TIFFTAG_REDUCTIONMATRIX2 50726 /* &dimensionality reduction + matrix 2 */ +#define TIFFTAG_ANALOGBALANCE 50727 /* &gain applied the stored raw + values*/ +#define TIFFTAG_ASSHOTNEUTRAL 50728 /* &selected white balance in + linear reference space */ +#define TIFFTAG_ASSHOTWHITEXY 50729 /* &selected white balance in + x-y chromaticity + coordinates */ +#define TIFFTAG_BASELINEEXPOSURE 50730 /* &how much to move the zero + point */ +#define TIFFTAG_BASELINENOISE 50731 /* &relative noise level */ +#define TIFFTAG_BASELINESHARPNESS 50732 /* &relative amount of + sharpening */ +#define TIFFTAG_BAYERGREENSPLIT 50733 /* &how closely the values of + the green pixels in the + blue/green rows track the + values of the green pixels + in the red/green rows */ +#define TIFFTAG_LINEARRESPONSELIMIT 50734 /* &non-linear encoding range */ +#define TIFFTAG_CAMERASERIALNUMBER 50735 /* &camera's serial number */ +#define TIFFTAG_LENSINFO 50736 /* info about the lens */ +#define TIFFTAG_CHROMABLURRADIUS 50737 /* &chroma blur radius */ +#define TIFFTAG_ANTIALIASSTRENGTH 50738 /* &relative strength of the + camera's anti-alias filter */ +#define TIFFTAG_SHADOWSCALE 50739 /* &used by Adobe Camera Raw */ +#define TIFFTAG_DNGPRIVATEDATA 50740 /* &manufacturer's private data */ +#define TIFFTAG_MAKERNOTESAFETY 50741 /* &whether the EXIF MakerNote + tag is safe to preserve + along with the rest of the + EXIF data */ +#define TIFFTAG_CALIBRATIONILLUMINANT1 50778 /* &illuminant 1 */ +#define TIFFTAG_CALIBRATIONILLUMINANT2 50779 /* &illuminant 2 */ +#define TIFFTAG_BESTQUALITYSCALE 50780 /* &best quality multiplier */ +#define TIFFTAG_RAWDATAUNIQUEID 50781 /* &unique identifier for + the raw image data */ +#define TIFFTAG_ORIGINALRAWFILENAME 50827 /* &file name of the original + raw file */ +#define TIFFTAG_ORIGINALRAWFILEDATA 50828 /* &contents of the original + raw file */ +#define TIFFTAG_ACTIVEAREA 50829 /* &active (non-masked) pixels + of the sensor */ +#define TIFFTAG_MASKEDAREAS 50830 /* &list of coordinates + of fully masked pixels */ +#define TIFFTAG_ASSHOTICCPROFILE 50831 /* &these two tags used to */ +#define TIFFTAG_ASSHOTPREPROFILEMATRIX 50832 /* map cameras's color space + into ICC profile space */ +#define TIFFTAG_CURRENTICCPROFILE 50833 /* & */ +#define TIFFTAG_CURRENTPREPROFILEMATRIX 50834 /* & */ +/* tag 65535 is an undefined tag used by Eastman Kodak */ +#define TIFFTAG_DCSHUESHIFTVALUES 65535 /* hue shift correction data */ + +/* + * The following are ``pseudo tags'' that can be used to control + * codec-specific functionality. These tags are not written to file. + * Note that these values start at 0xffff+1 so that they'll never + * collide with Aldus-assigned tags. + * + * If you want your private pseudo tags ``registered'' (i.e. added to + * this file), please post a bug report via the tracking system at + * http://www.remotesensing.org/libtiff/bugs.html with the appropriate + * C definitions to add. + */ +#define TIFFTAG_FAXMODE 65536 /* Group 3/4 format control */ +#define FAXMODE_CLASSIC 0x0000 /* default, include RTC */ +#define FAXMODE_NORTC 0x0001 /* no RTC at end of data */ +#define FAXMODE_NOEOL 0x0002 /* no EOL code at end of row */ +#define FAXMODE_BYTEALIGN 0x0004 /* byte align row */ +#define FAXMODE_WORDALIGN 0x0008 /* word align row */ +#define FAXMODE_CLASSF FAXMODE_NORTC /* TIFF Class F */ +#define TIFFTAG_JPEGQUALITY 65537 /* Compression quality level */ +/* Note: quality level is on the IJG 0-100 scale. Default value is 75 */ +#define TIFFTAG_JPEGCOLORMODE 65538 /* Auto RGB<=>YCbCr convert? */ +#define JPEGCOLORMODE_RAW 0x0000 /* no conversion (default) */ +#define JPEGCOLORMODE_RGB 0x0001 /* do auto conversion */ +#define TIFFTAG_JPEGTABLESMODE 65539 /* What to put in JPEGTables */ +#define JPEGTABLESMODE_QUANT 0x0001 /* include quantization tbls */ +#define JPEGTABLESMODE_HUFF 0x0002 /* include Huffman tbls */ +/* Note: default is JPEGTABLESMODE_QUANT | JPEGTABLESMODE_HUFF */ +#define TIFFTAG_FAXFILLFUNC 65540 /* G3/G4 fill function */ +#define TIFFTAG_PIXARLOGDATAFMT 65549 /* PixarLogCodec I/O data sz */ +#define PIXARLOGDATAFMT_8BIT 0 /* regular u_char samples */ +#define PIXARLOGDATAFMT_8BITABGR 1 /* ABGR-order u_chars */ +#define PIXARLOGDATAFMT_11BITLOG 2 /* 11-bit log-encoded (raw) */ +#define PIXARLOGDATAFMT_12BITPICIO 3 /* as per PICIO (1.0==2048) */ +#define PIXARLOGDATAFMT_16BIT 4 /* signed short samples */ +#define PIXARLOGDATAFMT_FLOAT 5 /* IEEE float samples */ +/* 65550-65556 are allocated to Oceana Matrix */ +#define TIFFTAG_DCSIMAGERTYPE 65550 /* imager model & filter */ +#define DCSIMAGERMODEL_M3 0 /* M3 chip (1280 x 1024) */ +#define DCSIMAGERMODEL_M5 1 /* M5 chip (1536 x 1024) */ +#define DCSIMAGERMODEL_M6 2 /* M6 chip (3072 x 2048) */ +#define DCSIMAGERFILTER_IR 0 /* infrared filter */ +#define DCSIMAGERFILTER_MONO 1 /* monochrome filter */ +#define DCSIMAGERFILTER_CFA 2 /* color filter array */ +#define DCSIMAGERFILTER_OTHER 3 /* other filter */ +#define TIFFTAG_DCSINTERPMODE 65551 /* interpolation mode */ +#define DCSINTERPMODE_NORMAL 0x0 /* whole image, default */ +#define DCSINTERPMODE_PREVIEW 0x1 /* preview of image (384x256) */ +#define TIFFTAG_DCSBALANCEARRAY 65552 /* color balance values */ +#define TIFFTAG_DCSCORRECTMATRIX 65553 /* color correction values */ +#define TIFFTAG_DCSGAMMA 65554 /* gamma value */ +#define TIFFTAG_DCSTOESHOULDERPTS 65555 /* toe & shoulder points */ +#define TIFFTAG_DCSCALIBRATIONFD 65556 /* calibration file desc */ +/* Note: quality level is on the ZLIB 1-9 scale. Default value is -1 */ +#define TIFFTAG_ZIPQUALITY 65557 /* compression quality level */ +#define TIFFTAG_PIXARLOGQUALITY 65558 /* PixarLog uses same scale */ +/* 65559 is allocated to Oceana Matrix */ +#define TIFFTAG_DCSCLIPRECTANGLE 65559 /* area of image to acquire */ +#define TIFFTAG_SGILOGDATAFMT 65560 /* SGILog user data format */ +#define SGILOGDATAFMT_FLOAT 0 /* IEEE float samples */ +#define SGILOGDATAFMT_16BIT 1 /* 16-bit samples */ +#define SGILOGDATAFMT_RAW 2 /* uninterpreted data */ +#define SGILOGDATAFMT_8BIT 3 /* 8-bit RGB monitor values */ +#define TIFFTAG_SGILOGENCODE 65561 /* SGILog data encoding control*/ +#define SGILOGENCODE_NODITHER 0 /* do not dither encoded values*/ +#define SGILOGENCODE_RANDITHER 1 /* randomly dither encd values */ +#define TIFFTAG_LZMAPRESET 65562 /* LZMA2 preset (compression level) */ +#define TIFFTAG_PERSAMPLE 65563 /* interface for per sample tags */ +#define PERSAMPLE_MERGED 0 /* present as a single value */ +#define PERSAMPLE_MULTI 1 /* present as multiple values */ + +/* + * EXIF tags + */ +#define EXIFTAG_EXPOSURETIME 33434 /* Exposure time */ +#define EXIFTAG_FNUMBER 33437 /* F number */ +#define EXIFTAG_EXPOSUREPROGRAM 34850 /* Exposure program */ +#define EXIFTAG_SPECTRALSENSITIVITY 34852 /* Spectral sensitivity */ +#define EXIFTAG_ISOSPEEDRATINGS 34855 /* ISO speed rating */ +#define EXIFTAG_OECF 34856 /* Optoelectric conversion + factor */ +#define EXIFTAG_EXIFVERSION 36864 /* Exif version */ +#define EXIFTAG_DATETIMEORIGINAL 36867 /* Date and time of original + data generation */ +#define EXIFTAG_DATETIMEDIGITIZED 36868 /* Date and time of digital + data generation */ +#define EXIFTAG_COMPONENTSCONFIGURATION 37121 /* Meaning of each component */ +#define EXIFTAG_COMPRESSEDBITSPERPIXEL 37122 /* Image compression mode */ +#define EXIFTAG_SHUTTERSPEEDVALUE 37377 /* Shutter speed */ +#define EXIFTAG_APERTUREVALUE 37378 /* Aperture */ +#define EXIFTAG_BRIGHTNESSVALUE 37379 /* Brightness */ +#define EXIFTAG_EXPOSUREBIASVALUE 37380 /* Exposure bias */ +#define EXIFTAG_MAXAPERTUREVALUE 37381 /* Maximum lens aperture */ +#define EXIFTAG_SUBJECTDISTANCE 37382 /* Subject distance */ +#define EXIFTAG_METERINGMODE 37383 /* Metering mode */ +#define EXIFTAG_LIGHTSOURCE 37384 /* Light source */ +#define EXIFTAG_FLASH 37385 /* Flash */ +#define EXIFTAG_FOCALLENGTH 37386 /* Lens focal length */ +#define EXIFTAG_SUBJECTAREA 37396 /* Subject area */ +#define EXIFTAG_MAKERNOTE 37500 /* Manufacturer notes */ +#define EXIFTAG_USERCOMMENT 37510 /* User comments */ +#define EXIFTAG_SUBSECTIME 37520 /* DateTime subseconds */ +#define EXIFTAG_SUBSECTIMEORIGINAL 37521 /* DateTimeOriginal subseconds */ +#define EXIFTAG_SUBSECTIMEDIGITIZED 37522 /* DateTimeDigitized subseconds */ +#define EXIFTAG_FLASHPIXVERSION 40960 /* Supported Flashpix version */ +#define EXIFTAG_COLORSPACE 40961 /* Color space information */ +#define EXIFTAG_PIXELXDIMENSION 40962 /* Valid image width */ +#define EXIFTAG_PIXELYDIMENSION 40963 /* Valid image height */ +#define EXIFTAG_RELATEDSOUNDFILE 40964 /* Related audio file */ +#define EXIFTAG_FLASHENERGY 41483 /* Flash energy */ +#define EXIFTAG_SPATIALFREQUENCYRESPONSE 41484 /* Spatial frequency response */ +#define EXIFTAG_FOCALPLANEXRESOLUTION 41486 /* Focal plane X resolution */ +#define EXIFTAG_FOCALPLANEYRESOLUTION 41487 /* Focal plane Y resolution */ +#define EXIFTAG_FOCALPLANERESOLUTIONUNIT 41488 /* Focal plane resolution unit */ +#define EXIFTAG_SUBJECTLOCATION 41492 /* Subject location */ +#define EXIFTAG_EXPOSUREINDEX 41493 /* Exposure index */ +#define EXIFTAG_SENSINGMETHOD 41495 /* Sensing method */ +#define EXIFTAG_FILESOURCE 41728 /* File source */ +#define EXIFTAG_SCENETYPE 41729 /* Scene type */ +#define EXIFTAG_CFAPATTERN 41730 /* CFA pattern */ +#define EXIFTAG_CUSTOMRENDERED 41985 /* Custom image processing */ +#define EXIFTAG_EXPOSUREMODE 41986 /* Exposure mode */ +#define EXIFTAG_WHITEBALANCE 41987 /* White balance */ +#define EXIFTAG_DIGITALZOOMRATIO 41988 /* Digital zoom ratio */ +#define EXIFTAG_FOCALLENGTHIN35MMFILM 41989 /* Focal length in 35 mm film */ +#define EXIFTAG_SCENECAPTURETYPE 41990 /* Scene capture type */ +#define EXIFTAG_GAINCONTROL 41991 /* Gain control */ +#define EXIFTAG_CONTRAST 41992 /* Contrast */ +#define EXIFTAG_SATURATION 41993 /* Saturation */ +#define EXIFTAG_SHARPNESS 41994 /* Sharpness */ +#define EXIFTAG_DEVICESETTINGDESCRIPTION 41995 /* Device settings description */ +#define EXIFTAG_SUBJECTDISTANCERANGE 41996 /* Subject distance range */ +#define EXIFTAG_GAINCONTROL 41991 /* Gain control */ +#define EXIFTAG_GAINCONTROL 41991 /* Gain control */ +#define EXIFTAG_IMAGEUNIQUEID 42016 /* Unique image ID */ + +#endif /* _TIFF_ */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/VisualC/external/include/tiffconf.h b/src/SDL2/VisualC/external/include/tiffconf.h new file mode 100755 index 000000000..e6959d366 --- /dev/null +++ b/src/SDL2/VisualC/external/include/tiffconf.h @@ -0,0 +1,128 @@ +/* libtiff/tiffconf.h. Generated from tiffconf.h.in by configure. */ +/* + Configuration defines for installed libtiff. + This file maintained for backward compatibility. Do not use definitions + from this file in your programs. +*/ + +#ifndef _TIFFCONF_ +#define _TIFFCONF_ + +/* Signed 16-bit type */ +#define TIFF_INT16_T signed short + +/* Signed 32-bit type */ +#define TIFF_INT32_T signed int + +/* Signed 64-bit type */ +#define TIFF_INT64_T signed long long + +/* Signed 8-bit type */ +#define TIFF_INT8_T signed char + +/* Unsigned 16-bit type */ +#define TIFF_UINT16_T unsigned short + +/* Unsigned 32-bit type */ +#define TIFF_UINT32_T unsigned int + +/* Unsigned 64-bit type */ +#define TIFF_UINT64_T unsigned long long + +/* Unsigned 8-bit type */ +#define TIFF_UINT8_T unsigned char + +/* Signed size type */ +#define TIFF_SSIZE_T signed long + +/* Pointer difference type */ +#define TIFF_PTRDIFF_T ptrdiff_t + +/* Define to 1 if the system has the type `int16'. */ +/* #undef HAVE_INT16 */ + +/* Define to 1 if the system has the type `int32'. */ +/* #undef HAVE_INT32 */ + +/* Define to 1 if the system has the type `int8'. */ +/* #undef HAVE_INT8 */ + +/* Compatibility stuff. */ + +/* Define as 0 or 1 according to the floating point format suported by the + machine */ +#define HAVE_IEEEFP 1 + +/* Set the native cpu bit order (FILLORDER_LSB2MSB or FILLORDER_MSB2LSB) */ +#define HOST_FILLORDER FILLORDER_LSB2MSB + +/* Native cpu byte order: 1 if big-endian (Motorola) or 0 if little-endian + (Intel) */ +#define HOST_BIGENDIAN 0 + +/* Support CCITT Group 3 & 4 algorithms */ +#define CCITT_SUPPORT 1 + +/* Support JPEG compression (requires IJG JPEG library) */ +#define JPEG_SUPPORT 1 + +/* Support JBIG compression (requires JBIG-KIT library) */ +/* #undef JBIG_SUPPORT */ + +/* Support LogLuv high dynamic range encoding */ +#define LOGLUV_SUPPORT 1 + +/* Support LZW algorithm */ +#define LZW_SUPPORT 1 + +/* Support NeXT 2-bit RLE algorithm */ +#define NEXT_SUPPORT 1 + +/* Support Old JPEG compresson (read contrib/ojpeg/README first! Compilation + fails with unpatched IJG JPEG library) */ +#define OJPEG_SUPPORT 1 + +/* Support Macintosh PackBits algorithm */ +#define PACKBITS_SUPPORT 1 + +/* Support Pixar log-format algorithm (requires Zlib) */ +#define PIXARLOG_SUPPORT 1 + +/* Support ThunderScan 4-bit RLE algorithm */ +#define THUNDER_SUPPORT 1 + +/* Support Deflate compression */ +#define ZIP_SUPPORT 1 + +/* Support strip chopping (whether or not to convert single-strip uncompressed + images to mutiple strips of ~8Kb to reduce memory usage) */ +#define STRIPCHOP_DEFAULT TIFF_STRIPCHOP + +/* Enable SubIFD tag (330) support */ +#define SUBIFD_SUPPORT 1 + +/* Treat extra sample as alpha (default enabled). The RGBA interface will + treat a fourth sample with no EXTRASAMPLE_ value as being ASSOCALPHA. Many + packages produce RGBA files but don't mark the alpha properly. */ +#define DEFAULT_EXTRASAMPLE_AS_ALPHA 1 + +/* Pick up YCbCr subsampling info from the JPEG data stream to support files + lacking the tag (default enabled). */ +#define CHECK_JPEG_YCBCR_SUBSAMPLING 1 + +/* Support MS MDI magic number files as TIFF */ +#define MDI_SUPPORT 1 + +/* + * Feature support definitions. + * XXX: These macros are obsoleted. Don't use them in your apps! + * Macros stays here for backward compatibility and should be always defined. + */ +#define COLORIMETRY_SUPPORT +#define YCBCR_SUPPORT +#define CMYK_SUPPORT +#define ICC_SUPPORT +#define PHOTOSHOP_SUPPORT +#define IPTC_SUPPORT + +#endif /* _TIFFCONF_ */ diff --git a/src/SDL2/VisualC/external/include/tiffio.h b/src/SDL2/VisualC/external/include/tiffio.h new file mode 100755 index 000000000..038b67013 --- /dev/null +++ b/src/SDL2/VisualC/external/include/tiffio.h @@ -0,0 +1,557 @@ +/* $Id: tiffio.h,v 1.91 2012-07-29 15:45:29 tgl Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _TIFFIO_ +#define _TIFFIO_ + +/* + * TIFF I/O Library Definitions. + */ +#include "tiff.h" +#include "tiffvers.h" + +/* + * TIFF is defined as an incomplete type to hide the + * library's internal data structures from clients. + */ +typedef struct tiff TIFF; + +/* + * The following typedefs define the intrinsic size of + * data types used in the *exported* interfaces. These + * definitions depend on the proper definition of types + * in tiff.h. Note also that the varargs interface used + * to pass tag types and values uses the types defined in + * tiff.h directly. + * + * NB: ttag_t is unsigned int and not unsigned short because + * ANSI C requires that the type before the ellipsis be a + * promoted type (i.e. one of int, unsigned int, pointer, + * or double) and because we defined pseudo-tags that are + * outside the range of legal Aldus-assigned tags. + * NB: tsize_t is int32 and not uint32 because some functions + * return -1. + * NB: toff_t is not off_t for many reasons; TIFFs max out at + * 32-bit file offsets, and BigTIFF maxes out at 64-bit + * offsets being the most important, and to ensure use of + * a consistently unsigned type across architectures. + * Prior to libtiff 4.0, this was an unsigned 32 bit type. + */ +/* + * this is the machine addressing size type, only it's signed, so make it + * int32 on 32bit machines, int64 on 64bit machines + */ +typedef TIFF_SSIZE_T tmsize_t; +typedef uint64 toff_t; /* file offset */ +/* the following are deprecated and should be replaced by their defining + counterparts */ +typedef uint32 ttag_t; /* directory tag */ +typedef uint16 tdir_t; /* directory index */ +typedef uint16 tsample_t; /* sample number */ +typedef uint32 tstrile_t; /* strip or tile number */ +typedef tstrile_t tstrip_t; /* strip number */ +typedef tstrile_t ttile_t; /* tile number */ +typedef tmsize_t tsize_t; /* i/o size in bytes */ +typedef void* tdata_t; /* image data ref */ + +#if !defined(__WIN32__) && (defined(_WIN32) || defined(WIN32)) +#define __WIN32__ +#endif + +/* + * On windows you should define USE_WIN32_FILEIO if you are using tif_win32.c + * or AVOID_WIN32_FILEIO if you are using something else (like tif_unix.c). + * + * By default tif_unix.c is assumed. + */ + +#if defined(_WINDOWS) || defined(__WIN32__) || defined(_Windows) +# if !defined(__CYGWIN) && !defined(AVOID_WIN32_FILEIO) && !defined(USE_WIN32_FILEIO) +# define AVOID_WIN32_FILEIO +# endif +#endif + +#if defined(USE_WIN32_FILEIO) +# define VC_EXTRALEAN +# include +# ifdef __WIN32__ +DECLARE_HANDLE(thandle_t); /* Win32 file handle */ +# else +typedef HFILE thandle_t; /* client data handle */ +# endif /* __WIN32__ */ +#else +typedef void* thandle_t; /* client data handle */ +#endif /* USE_WIN32_FILEIO */ + +/* + * Flags to pass to TIFFPrintDirectory to control + * printing of data structures that are potentially + * very large. Bit-or these flags to enable printing + * multiple items. + */ +#define TIFFPRINT_NONE 0x0 /* no extra info */ +#define TIFFPRINT_STRIPS 0x1 /* strips/tiles info */ +#define TIFFPRINT_CURVES 0x2 /* color/gray response curves */ +#define TIFFPRINT_COLORMAP 0x4 /* colormap */ +#define TIFFPRINT_JPEGQTABLES 0x100 /* JPEG Q matrices */ +#define TIFFPRINT_JPEGACTABLES 0x200 /* JPEG AC tables */ +#define TIFFPRINT_JPEGDCTABLES 0x200 /* JPEG DC tables */ + +/* + * Colour conversion stuff + */ + +/* reference white */ +#define D65_X0 (95.0470F) +#define D65_Y0 (100.0F) +#define D65_Z0 (108.8827F) + +#define D50_X0 (96.4250F) +#define D50_Y0 (100.0F) +#define D50_Z0 (82.4680F) + +/* Structure for holding information about a display device. */ + +typedef unsigned char TIFFRGBValue; /* 8-bit samples */ + +typedef struct { + float d_mat[3][3]; /* XYZ -> luminance matrix */ + float d_YCR; /* Light o/p for reference white */ + float d_YCG; + float d_YCB; + uint32 d_Vrwr; /* Pixel values for ref. white */ + uint32 d_Vrwg; + uint32 d_Vrwb; + float d_Y0R; /* Residual light for black pixel */ + float d_Y0G; + float d_Y0B; + float d_gammaR; /* Gamma values for the three guns */ + float d_gammaG; + float d_gammaB; +} TIFFDisplay; + +typedef struct { /* YCbCr->RGB support */ + TIFFRGBValue* clamptab; /* range clamping table */ + int* Cr_r_tab; + int* Cb_b_tab; + int32* Cr_g_tab; + int32* Cb_g_tab; + int32* Y_tab; +} TIFFYCbCrToRGB; + +typedef struct { /* CIE Lab 1976->RGB support */ + int range; /* Size of conversion table */ +#define CIELABTORGB_TABLE_RANGE 1500 + float rstep, gstep, bstep; + float X0, Y0, Z0; /* Reference white point */ + TIFFDisplay display; + float Yr2r[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yr to r */ + float Yg2g[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yg to g */ + float Yb2b[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yb to b */ +} TIFFCIELabToRGB; + +/* + * RGBA-style image support. + */ +typedef struct _TIFFRGBAImage TIFFRGBAImage; +/* + * The image reading and conversion routines invoke + * ``put routines'' to copy/image/whatever tiles of + * raw image data. A default set of routines are + * provided to convert/copy raw image data to 8-bit + * packed ABGR format rasters. Applications can supply + * alternate routines that unpack the data into a + * different format or, for example, unpack the data + * and draw the unpacked raster on the display. + */ +typedef void (*tileContigRoutine) + (TIFFRGBAImage*, uint32*, uint32, uint32, uint32, uint32, int32, int32, + unsigned char*); +typedef void (*tileSeparateRoutine) + (TIFFRGBAImage*, uint32*, uint32, uint32, uint32, uint32, int32, int32, + unsigned char*, unsigned char*, unsigned char*, unsigned char*); +/* + * RGBA-reader state. + */ +struct _TIFFRGBAImage { + TIFF* tif; /* image handle */ + int stoponerr; /* stop on read error */ + int isContig; /* data is packed/separate */ + int alpha; /* type of alpha data present */ + uint32 width; /* image width */ + uint32 height; /* image height */ + uint16 bitspersample; /* image bits/sample */ + uint16 samplesperpixel; /* image samples/pixel */ + uint16 orientation; /* image orientation */ + uint16 req_orientation; /* requested orientation */ + uint16 photometric; /* image photometric interp */ + uint16* redcmap; /* colormap pallete */ + uint16* greencmap; + uint16* bluecmap; + /* get image data routine */ + int (*get)(TIFFRGBAImage*, uint32*, uint32, uint32); + /* put decoded strip/tile */ + union { + void (*any)(TIFFRGBAImage*); + tileContigRoutine contig; + tileSeparateRoutine separate; + } put; + TIFFRGBValue* Map; /* sample mapping array */ + uint32** BWmap; /* black&white map */ + uint32** PALmap; /* palette image map */ + TIFFYCbCrToRGB* ycbcr; /* YCbCr conversion state */ + TIFFCIELabToRGB* cielab; /* CIE L*a*b conversion state */ + + uint8* UaToAa; /* Unassociated alpha to associated alpha convertion LUT */ + uint8* Bitdepth16To8; /* LUT for conversion from 16bit to 8bit values */ + + int row_offset; + int col_offset; +}; + +/* + * Macros for extracting components from the + * packed ABGR form returned by TIFFReadRGBAImage. + */ +#define TIFFGetR(abgr) ((abgr) & 0xff) +#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff) +#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff) +#define TIFFGetA(abgr) (((abgr) >> 24) & 0xff) + +/* + * A CODEC is a software package that implements decoding, + * encoding, or decoding+encoding of a compression algorithm. + * The library provides a collection of builtin codecs. + * More codecs may be registered through calls to the library + * and/or the builtin implementations may be overridden. + */ +typedef int (*TIFFInitMethod)(TIFF*, int); +typedef struct { + char* name; + uint16 scheme; + TIFFInitMethod init; +} TIFFCodec; + +#include +#include + +/* share internal LogLuv conversion routines? */ +#ifndef LOGLUV_PUBLIC +#define LOGLUV_PUBLIC 1 +#endif + +#if !defined(__GNUC__) && !defined(__attribute__) +# define __attribute__(x) /*nothing*/ +#endif + +#if defined(c_plusplus) || defined(__cplusplus) +extern "C" { +#endif +typedef void (*TIFFErrorHandler)(const char*, const char*, va_list); +typedef void (*TIFFErrorHandlerExt)(thandle_t, const char*, const char*, va_list); +typedef tmsize_t (*TIFFReadWriteProc)(thandle_t, void*, tmsize_t); +typedef toff_t (*TIFFSeekProc)(thandle_t, toff_t, int); +typedef int (*TIFFCloseProc)(thandle_t); +typedef toff_t (*TIFFSizeProc)(thandle_t); +typedef int (*TIFFMapFileProc)(thandle_t, void** base, toff_t* size); +typedef void (*TIFFUnmapFileProc)(thandle_t, void* base, toff_t size); +typedef void (*TIFFExtendProc)(TIFF*); + +extern const char* TIFFGetVersion(void); + +extern const TIFFCodec* TIFFFindCODEC(uint16); +extern TIFFCodec* TIFFRegisterCODEC(uint16, const char*, TIFFInitMethod); +extern void TIFFUnRegisterCODEC(TIFFCodec*); +extern int TIFFIsCODECConfigured(uint16); +extern TIFFCodec* TIFFGetConfiguredCODECs(void); + +/* + * Auxiliary functions. + */ + +extern void* _TIFFmalloc(tmsize_t s); +extern void* _TIFFrealloc(void* p, tmsize_t s); +extern void _TIFFmemset(void* p, int v, tmsize_t c); +extern void _TIFFmemcpy(void* d, const void* s, tmsize_t c); +extern int _TIFFmemcmp(const void* p1, const void* p2, tmsize_t c); +extern void _TIFFfree(void* p); + +/* +** Stuff, related to tag handling and creating custom tags. +*/ +extern int TIFFGetTagListCount( TIFF * ); +extern uint32 TIFFGetTagListEntry( TIFF *, int tag_index ); + +#define TIFF_ANY TIFF_NOTYPE /* for field descriptor searching */ +#define TIFF_VARIABLE -1 /* marker for variable length tags */ +#define TIFF_SPP -2 /* marker for SamplesPerPixel tags */ +#define TIFF_VARIABLE2 -3 /* marker for uint32 var-length tags */ + +#define FIELD_CUSTOM 65 + +typedef struct _TIFFField TIFFField; +typedef struct _TIFFFieldArray TIFFFieldArray; + +extern const TIFFField* TIFFFindField(TIFF *, uint32, TIFFDataType); +extern const TIFFField* TIFFFieldWithTag(TIFF*, uint32); +extern const TIFFField* TIFFFieldWithName(TIFF*, const char *); + +extern uint32 TIFFFieldTag(const TIFFField*); +extern const char* TIFFFieldName(const TIFFField*); +extern TIFFDataType TIFFFieldDataType(const TIFFField*); +extern int TIFFFieldPassCount(const TIFFField*); +extern int TIFFFieldReadCount(const TIFFField*); +extern int TIFFFieldWriteCount(const TIFFField*); + +typedef int (*TIFFVSetMethod)(TIFF*, uint32, va_list); +typedef int (*TIFFVGetMethod)(TIFF*, uint32, va_list); +typedef void (*TIFFPrintMethod)(TIFF*, FILE*, long); + +typedef struct { + TIFFVSetMethod vsetfield; /* tag set routine */ + TIFFVGetMethod vgetfield; /* tag get routine */ + TIFFPrintMethod printdir; /* directory print routine */ +} TIFFTagMethods; + +extern TIFFTagMethods *TIFFAccessTagMethods(TIFF *); +extern void *TIFFGetClientInfo(TIFF *, const char *); +extern void TIFFSetClientInfo(TIFF *, void *, const char *); + +extern void TIFFCleanup(TIFF* tif); +extern void TIFFClose(TIFF* tif); +extern int TIFFFlush(TIFF* tif); +extern int TIFFFlushData(TIFF* tif); +extern int TIFFGetField(TIFF* tif, uint32 tag, ...); +extern int TIFFVGetField(TIFF* tif, uint32 tag, va_list ap); +extern int TIFFGetFieldDefaulted(TIFF* tif, uint32 tag, ...); +extern int TIFFVGetFieldDefaulted(TIFF* tif, uint32 tag, va_list ap); +extern int TIFFReadDirectory(TIFF* tif); +extern int TIFFReadCustomDirectory(TIFF* tif, toff_t diroff, const TIFFFieldArray* infoarray); +extern int TIFFReadEXIFDirectory(TIFF* tif, toff_t diroff); +extern uint64 TIFFScanlineSize64(TIFF* tif); +extern tmsize_t TIFFScanlineSize(TIFF* tif); +extern uint64 TIFFRasterScanlineSize64(TIFF* tif); +extern tmsize_t TIFFRasterScanlineSize(TIFF* tif); +extern uint64 TIFFStripSize64(TIFF* tif); +extern tmsize_t TIFFStripSize(TIFF* tif); +extern uint64 TIFFRawStripSize64(TIFF* tif, uint32 strip); +extern tmsize_t TIFFRawStripSize(TIFF* tif, uint32 strip); +extern uint64 TIFFVStripSize64(TIFF* tif, uint32 nrows); +extern tmsize_t TIFFVStripSize(TIFF* tif, uint32 nrows); +extern uint64 TIFFTileRowSize64(TIFF* tif); +extern tmsize_t TIFFTileRowSize(TIFF* tif); +extern uint64 TIFFTileSize64(TIFF* tif); +extern tmsize_t TIFFTileSize(TIFF* tif); +extern uint64 TIFFVTileSize64(TIFF* tif, uint32 nrows); +extern tmsize_t TIFFVTileSize(TIFF* tif, uint32 nrows); +extern uint32 TIFFDefaultStripSize(TIFF* tif, uint32 request); +extern void TIFFDefaultTileSize(TIFF*, uint32*, uint32*); +extern int TIFFFileno(TIFF*); +extern int TIFFSetFileno(TIFF*, int); +extern thandle_t TIFFClientdata(TIFF*); +extern thandle_t TIFFSetClientdata(TIFF*, thandle_t); +extern int TIFFGetMode(TIFF*); +extern int TIFFSetMode(TIFF*, int); +extern int TIFFIsTiled(TIFF*); +extern int TIFFIsByteSwapped(TIFF*); +extern int TIFFIsUpSampled(TIFF*); +extern int TIFFIsMSB2LSB(TIFF*); +extern int TIFFIsBigEndian(TIFF*); +extern TIFFReadWriteProc TIFFGetReadProc(TIFF*); +extern TIFFReadWriteProc TIFFGetWriteProc(TIFF*); +extern TIFFSeekProc TIFFGetSeekProc(TIFF*); +extern TIFFCloseProc TIFFGetCloseProc(TIFF*); +extern TIFFSizeProc TIFFGetSizeProc(TIFF*); +extern TIFFMapFileProc TIFFGetMapFileProc(TIFF*); +extern TIFFUnmapFileProc TIFFGetUnmapFileProc(TIFF*); +extern uint32 TIFFCurrentRow(TIFF*); +extern uint16 TIFFCurrentDirectory(TIFF*); +extern uint16 TIFFNumberOfDirectories(TIFF*); +extern uint64 TIFFCurrentDirOffset(TIFF*); +extern uint32 TIFFCurrentStrip(TIFF*); +extern uint32 TIFFCurrentTile(TIFF* tif); +extern int TIFFReadBufferSetup(TIFF* tif, void* bp, tmsize_t size); +extern int TIFFWriteBufferSetup(TIFF* tif, void* bp, tmsize_t size); +extern int TIFFSetupStrips(TIFF *); +extern int TIFFWriteCheck(TIFF*, int, const char *); +extern void TIFFFreeDirectory(TIFF*); +extern int TIFFCreateDirectory(TIFF*); +extern int TIFFCreateCustomDirectory(TIFF*,const TIFFFieldArray*); +extern int TIFFCreateEXIFDirectory(TIFF*); +extern int TIFFLastDirectory(TIFF*); +extern int TIFFSetDirectory(TIFF*, uint16); +extern int TIFFSetSubDirectory(TIFF*, uint64); +extern int TIFFUnlinkDirectory(TIFF*, uint16); +extern int TIFFSetField(TIFF*, uint32, ...); +extern int TIFFVSetField(TIFF*, uint32, va_list); +extern int TIFFUnsetField(TIFF*, uint32); +extern int TIFFWriteDirectory(TIFF *); +extern int TIFFWriteCustomDirectory(TIFF *, uint64 *); +extern int TIFFCheckpointDirectory(TIFF *); +extern int TIFFRewriteDirectory(TIFF *); + +#if defined(c_plusplus) || defined(__cplusplus) +extern void TIFFPrintDirectory(TIFF*, FILE*, long = 0); +extern int TIFFReadScanline(TIFF* tif, void* buf, uint32 row, uint16 sample = 0); +extern int TIFFWriteScanline(TIFF* tif, void* buf, uint32 row, uint16 sample = 0); +extern int TIFFReadRGBAImage(TIFF*, uint32, uint32, uint32*, int = 0); +extern int TIFFReadRGBAImageOriented(TIFF*, uint32, uint32, uint32*, + int = ORIENTATION_BOTLEFT, int = 0); +#else +extern void TIFFPrintDirectory(TIFF*, FILE*, long); +extern int TIFFReadScanline(TIFF* tif, void* buf, uint32 row, uint16 sample); +extern int TIFFWriteScanline(TIFF* tif, void* buf, uint32 row, uint16 sample); +extern int TIFFReadRGBAImage(TIFF*, uint32, uint32, uint32*, int); +extern int TIFFReadRGBAImageOriented(TIFF*, uint32, uint32, uint32*, int, int); +#endif + +extern int TIFFReadRGBAStrip(TIFF*, uint32, uint32 * ); +extern int TIFFReadRGBATile(TIFF*, uint32, uint32, uint32 * ); +extern int TIFFRGBAImageOK(TIFF*, char [1024]); +extern int TIFFRGBAImageBegin(TIFFRGBAImage*, TIFF*, int, char [1024]); +extern int TIFFRGBAImageGet(TIFFRGBAImage*, uint32*, uint32, uint32); +extern void TIFFRGBAImageEnd(TIFFRGBAImage*); +extern TIFF* TIFFOpen(const char*, const char*); +# ifdef __WIN32__ +extern TIFF* TIFFOpenW(const wchar_t*, const char*); +# endif /* __WIN32__ */ +extern TIFF* TIFFFdOpen(int, const char*, const char*); +extern TIFF* TIFFClientOpen(const char*, const char*, + thandle_t, + TIFFReadWriteProc, TIFFReadWriteProc, + TIFFSeekProc, TIFFCloseProc, + TIFFSizeProc, + TIFFMapFileProc, TIFFUnmapFileProc); +extern const char* TIFFFileName(TIFF*); +extern const char* TIFFSetFileName(TIFF*, const char *); +extern void TIFFError(const char*, const char*, ...) __attribute__((__format__ (__printf__,2,3))); +extern void TIFFErrorExt(thandle_t, const char*, const char*, ...) __attribute__((__format__ (__printf__,3,4))); +extern void TIFFWarning(const char*, const char*, ...) __attribute__((__format__ (__printf__,2,3))); +extern void TIFFWarningExt(thandle_t, const char*, const char*, ...) __attribute__((__format__ (__printf__,3,4))); +extern TIFFErrorHandler TIFFSetErrorHandler(TIFFErrorHandler); +extern TIFFErrorHandlerExt TIFFSetErrorHandlerExt(TIFFErrorHandlerExt); +extern TIFFErrorHandler TIFFSetWarningHandler(TIFFErrorHandler); +extern TIFFErrorHandlerExt TIFFSetWarningHandlerExt(TIFFErrorHandlerExt); +extern TIFFExtendProc TIFFSetTagExtender(TIFFExtendProc); +extern uint32 TIFFComputeTile(TIFF* tif, uint32 x, uint32 y, uint32 z, uint16 s); +extern int TIFFCheckTile(TIFF* tif, uint32 x, uint32 y, uint32 z, uint16 s); +extern uint32 TIFFNumberOfTiles(TIFF*); +extern tmsize_t TIFFReadTile(TIFF* tif, void* buf, uint32 x, uint32 y, uint32 z, uint16 s); +extern tmsize_t TIFFWriteTile(TIFF* tif, void* buf, uint32 x, uint32 y, uint32 z, uint16 s); +extern uint32 TIFFComputeStrip(TIFF*, uint32, uint16); +extern uint32 TIFFNumberOfStrips(TIFF*); +extern tmsize_t TIFFReadEncodedStrip(TIFF* tif, uint32 strip, void* buf, tmsize_t size); +extern tmsize_t TIFFReadRawStrip(TIFF* tif, uint32 strip, void* buf, tmsize_t size); +extern tmsize_t TIFFReadEncodedTile(TIFF* tif, uint32 tile, void* buf, tmsize_t size); +extern tmsize_t TIFFReadRawTile(TIFF* tif, uint32 tile, void* buf, tmsize_t size); +extern tmsize_t TIFFWriteEncodedStrip(TIFF* tif, uint32 strip, void* data, tmsize_t cc); +extern tmsize_t TIFFWriteRawStrip(TIFF* tif, uint32 strip, void* data, tmsize_t cc); +extern tmsize_t TIFFWriteEncodedTile(TIFF* tif, uint32 tile, void* data, tmsize_t cc); +extern tmsize_t TIFFWriteRawTile(TIFF* tif, uint32 tile, void* data, tmsize_t cc); +extern int TIFFDataWidth(TIFFDataType); /* table of tag datatype widths */ +extern void TIFFSetWriteOffset(TIFF* tif, toff_t off); +extern void TIFFSwabShort(uint16*); +extern void TIFFSwabLong(uint32*); +extern void TIFFSwabLong8(uint64*); +extern void TIFFSwabFloat(float*); +extern void TIFFSwabDouble(double*); +extern void TIFFSwabArrayOfShort(uint16* wp, tmsize_t n); +extern void TIFFSwabArrayOfTriples(uint8* tp, tmsize_t n); +extern void TIFFSwabArrayOfLong(uint32* lp, tmsize_t n); +extern void TIFFSwabArrayOfLong8(uint64* lp, tmsize_t n); +extern void TIFFSwabArrayOfFloat(float* fp, tmsize_t n); +extern void TIFFSwabArrayOfDouble(double* dp, tmsize_t n); +extern void TIFFReverseBits(uint8* cp, tmsize_t n); +extern const unsigned char* TIFFGetBitRevTable(int); + +#ifdef LOGLUV_PUBLIC +#define U_NEU 0.210526316 +#define V_NEU 0.473684211 +#define UVSCALE 410. +extern double LogL16toY(int); +extern double LogL10toY(int); +extern void XYZtoRGB24(float*, uint8*); +extern int uv_decode(double*, double*, int); +extern void LogLuv24toXYZ(uint32, float*); +extern void LogLuv32toXYZ(uint32, float*); +#if defined(c_plusplus) || defined(__cplusplus) +extern int LogL16fromY(double, int = SGILOGENCODE_NODITHER); +extern int LogL10fromY(double, int = SGILOGENCODE_NODITHER); +extern int uv_encode(double, double, int = SGILOGENCODE_NODITHER); +extern uint32 LogLuv24fromXYZ(float*, int = SGILOGENCODE_NODITHER); +extern uint32 LogLuv32fromXYZ(float*, int = SGILOGENCODE_NODITHER); +#else +extern int LogL16fromY(double, int); +extern int LogL10fromY(double, int); +extern int uv_encode(double, double, int); +extern uint32 LogLuv24fromXYZ(float*, int); +extern uint32 LogLuv32fromXYZ(float*, int); +#endif +#endif /* LOGLUV_PUBLIC */ + +extern int TIFFCIELabToRGBInit(TIFFCIELabToRGB*, const TIFFDisplay *, float*); +extern void TIFFCIELabToXYZ(TIFFCIELabToRGB *, uint32, int32, int32, + float *, float *, float *); +extern void TIFFXYZToRGB(TIFFCIELabToRGB *, float, float, float, + uint32 *, uint32 *, uint32 *); + +extern int TIFFYCbCrToRGBInit(TIFFYCbCrToRGB*, float*, float*); +extern void TIFFYCbCrtoRGB(TIFFYCbCrToRGB *, uint32, int32, int32, + uint32 *, uint32 *, uint32 *); + +/**************************************************************************** + * O B S O L E T E D I N T E R F A C E S + * + * Don't use this stuff in your applications, it may be removed in the future + * libtiff versions. + ****************************************************************************/ +typedef struct { + ttag_t field_tag; /* field's tag */ + short field_readcount; /* read count/TIFF_VARIABLE/TIFF_SPP */ + short field_writecount; /* write count/TIFF_VARIABLE */ + TIFFDataType field_type; /* type of associated data */ + unsigned short field_bit; /* bit in fieldsset bit vector */ + unsigned char field_oktochange; /* if true, can change while writing */ + unsigned char field_passcount; /* if true, pass dir count on set */ + char *field_name; /* ASCII name */ +} TIFFFieldInfo; + +extern int TIFFMergeFieldInfo(TIFF*, const TIFFFieldInfo[], uint32); + +#if defined(c_plusplus) || defined(__cplusplus) +} +#endif + +#endif /* _TIFFIO_ */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/VisualC/external/include/tiffvers.h b/src/SDL2/VisualC/external/include/tiffvers.h new file mode 100755 index 000000000..40edc813d --- /dev/null +++ b/src/SDL2/VisualC/external/include/tiffvers.h @@ -0,0 +1,9 @@ +#define TIFFLIB_VERSION_STR "LIBTIFF, Version 4.0.3\nCopyright (c) 1988-1996 Sam Leffler\nCopyright (c) 1991-1996 Silicon Graphics, Inc." +/* + * This define can be used in code that requires + * compilation-related definitions specific to a + * version or versions of the library. Runtime + * version checking should be done based on the + * string returned by TIFFGetVersion. + */ +#define TIFFLIB_VERSION 20120922 diff --git a/src/SDL2/VisualC/external/include/webp/decode.h b/src/SDL2/VisualC/external/include/webp/decode.h new file mode 100644 index 000000000..fc2a83aba --- /dev/null +++ b/src/SDL2/VisualC/external/include/webp/decode.h @@ -0,0 +1,488 @@ +// Copyright 2010 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// Main decoding functions for WebP images. +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_DECODE_H_ +#define WEBP_WEBP_DECODE_H_ + +#include "./types.h" + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +#define WEBP_DECODER_ABI_VERSION 0x0201 // MAJOR(8b) + MINOR(8b) + +// Note: forward declaring enumerations is not allowed in (strict) C and C++, +// the types are left here for reference. +// typedef enum VP8StatusCode VP8StatusCode; +// typedef enum WEBP_CSP_MODE WEBP_CSP_MODE; +typedef struct WebPRGBABuffer WebPRGBABuffer; +typedef struct WebPYUVABuffer WebPYUVABuffer; +typedef struct WebPDecBuffer WebPDecBuffer; +typedef struct WebPIDecoder WebPIDecoder; +typedef struct WebPBitstreamFeatures WebPBitstreamFeatures; +typedef struct WebPDecoderOptions WebPDecoderOptions; +typedef struct WebPDecoderConfig WebPDecoderConfig; + +// Return the decoder's version number, packed in hexadecimal using 8bits for +// each of major/minor/revision. E.g: v2.5.7 is 0x020507. +WEBP_EXTERN(int) WebPGetDecoderVersion(void); + +// Retrieve basic header information: width, height. +// This function will also validate the header and return 0 in +// case of formatting error. +// Pointers 'width' and 'height' can be passed NULL if deemed irrelevant. +WEBP_EXTERN(int) WebPGetInfo(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Decodes WebP images pointed to by 'data' and returns RGBA samples, along +// with the dimensions in *width and *height. The ordering of samples in +// memory is R, G, B, A, R, G, B, A... in scan order (endian-independent). +// The returned pointer should be deleted calling free(). +// Returns NULL in case of error. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBA(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning A, R, G, B, A, R, G, B... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeARGB(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning B, G, R, A, B, G, R, A... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeBGRA(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning R, G, B, R, G, B... ordered data. +// If the bitstream contains transparency, it is ignored. +WEBP_EXTERN(uint8_t*) WebPDecodeRGB(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGB, but returning B, G, R, B, G, R... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeBGR(const uint8_t* data, size_t data_size, + int* width, int* height); + + +// Decode WebP images pointed to by 'data' to Y'UV format(*). The pointer +// returned is the Y samples buffer. Upon return, *u and *v will point to +// the U and V chroma data. These U and V buffers need NOT be free()'d, +// unlike the returned Y luma one. The dimension of the U and V planes +// are both (*width + 1) / 2 and (*height + 1)/ 2. +// Upon return, the Y buffer has a stride returned as '*stride', while U and V +// have a common stride returned as '*uv_stride'. +// Return NULL in case of error. +// (*) Also named Y'CbCr. See: http://en.wikipedia.org/wiki/YCbCr +WEBP_EXTERN(uint8_t*) WebPDecodeYUV(const uint8_t* data, size_t data_size, + int* width, int* height, + uint8_t** u, uint8_t** v, + int* stride, int* uv_stride); + +// These five functions are variants of the above ones, that decode the image +// directly into a pre-allocated buffer 'output_buffer'. The maximum storage +// available in this buffer is indicated by 'output_buffer_size'. If this +// storage is not sufficient (or an error occurred), NULL is returned. +// Otherwise, output_buffer is returned, for convenience. +// The parameter 'output_stride' specifies the distance (in bytes) +// between scanlines. Hence, output_buffer_size is expected to be at least +// output_stride x picture-height. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBAInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeARGBInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeBGRAInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// RGB and BGR variants. Here too the transparency information, if present, +// will be dropped and ignored. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeBGRInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// WebPDecodeYUVInto() is a variant of WebPDecodeYUV() that operates directly +// into pre-allocated luma/chroma plane buffers. This function requires the +// strides to be passed: one for the luma plane and one for each of the +// chroma ones. The size of each plane buffer is passed as 'luma_size', +// 'u_size' and 'v_size' respectively. +// Pointer to the luma plane ('*luma') is returned or NULL if an error occurred +// during decoding (or because some buffers were found to be too small). +WEBP_EXTERN(uint8_t*) WebPDecodeYUVInto( + const uint8_t* data, size_t data_size, + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride); + +//------------------------------------------------------------------------------ +// Output colorspaces and buffer + +// Colorspaces +// Note: the naming describes the byte-ordering of packed samples in memory. +// For instance, MODE_BGRA relates to samples ordered as B,G,R,A,B,G,R,A,... +// Non-capital names (e.g.:MODE_Argb) relates to pre-multiplied RGB channels. +// RGBA-4444 and RGB-565 colorspaces are represented by following byte-order: +// RGBA-4444: [r3 r2 r1 r0 g3 g2 g1 g0], [b3 b2 b1 b0 a3 a2 a1 a0], ... +// RGB-565: [r4 r3 r2 r1 r0 g5 g4 g3], [g2 g1 g0 b4 b3 b2 b1 b0], ... +// In the case WEBP_SWAP_16BITS_CSP is defined, the bytes are swapped for +// these two modes: +// RGBA-4444: [b3 b2 b1 b0 a3 a2 a1 a0], [r3 r2 r1 r0 g3 g2 g1 g0], ... +// RGB-565: [g2 g1 g0 b4 b3 b2 b1 b0], [r4 r3 r2 r1 r0 g5 g4 g3], ... + +typedef enum WEBP_CSP_MODE { + MODE_RGB = 0, MODE_RGBA = 1, + MODE_BGR = 2, MODE_BGRA = 3, + MODE_ARGB = 4, MODE_RGBA_4444 = 5, + MODE_RGB_565 = 6, + // RGB-premultiplied transparent modes (alpha value is preserved) + MODE_rgbA = 7, + MODE_bgrA = 8, + MODE_Argb = 9, + MODE_rgbA_4444 = 10, + // YUV modes must come after RGB ones. + MODE_YUV = 11, MODE_YUVA = 12, // yuv 4:2:0 + MODE_LAST = 13 +} WEBP_CSP_MODE; + +// Some useful macros: +static WEBP_INLINE int WebPIsPremultipliedMode(WEBP_CSP_MODE mode) { + return (mode == MODE_rgbA || mode == MODE_bgrA || mode == MODE_Argb || + mode == MODE_rgbA_4444); +} + +static WEBP_INLINE int WebPIsAlphaMode(WEBP_CSP_MODE mode) { + return (mode == MODE_RGBA || mode == MODE_BGRA || mode == MODE_ARGB || + mode == MODE_RGBA_4444 || mode == MODE_YUVA || + WebPIsPremultipliedMode(mode)); +} + +static WEBP_INLINE int WebPIsRGBMode(WEBP_CSP_MODE mode) { + return (mode < MODE_YUV); +} + +//------------------------------------------------------------------------------ +// WebPDecBuffer: Generic structure for describing the output sample buffer. + +struct WebPRGBABuffer { // view as RGBA + uint8_t* rgba; // pointer to RGBA samples + int stride; // stride in bytes from one scanline to the next. + size_t size; // total size of the *rgba buffer. +}; + +struct WebPYUVABuffer { // view as YUVA + uint8_t* y, *u, *v, *a; // pointer to luma, chroma U/V, alpha samples + int y_stride; // luma stride + int u_stride, v_stride; // chroma strides + int a_stride; // alpha stride + size_t y_size; // luma plane size + size_t u_size, v_size; // chroma planes size + size_t a_size; // alpha-plane size +}; + +// Output buffer +struct WebPDecBuffer { + WEBP_CSP_MODE colorspace; // Colorspace. + int width, height; // Dimensions. + int is_external_memory; // If true, 'internal_memory' pointer is not used. + union { + WebPRGBABuffer RGBA; + WebPYUVABuffer YUVA; + } u; // Nameless union of buffer parameters. + uint32_t pad[4]; // padding for later use + + uint8_t* private_memory; // Internally allocated memory (only when + // is_external_memory is false). Should not be used + // externally, but accessed via the buffer union. +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPInitDecBufferInternal(WebPDecBuffer*, int); + +// Initialize the structure as empty. Must be called before any other use. +// Returns false in case of version mismatch +static WEBP_INLINE int WebPInitDecBuffer(WebPDecBuffer* buffer) { + return WebPInitDecBufferInternal(buffer, WEBP_DECODER_ABI_VERSION); +} + +// Free any memory associated with the buffer. Must always be called last. +// Note: doesn't free the 'buffer' structure itself. +WEBP_EXTERN(void) WebPFreeDecBuffer(WebPDecBuffer* buffer); + +//------------------------------------------------------------------------------ +// Enumeration of the status codes + +typedef enum VP8StatusCode { + VP8_STATUS_OK = 0, + VP8_STATUS_OUT_OF_MEMORY, + VP8_STATUS_INVALID_PARAM, + VP8_STATUS_BITSTREAM_ERROR, + VP8_STATUS_UNSUPPORTED_FEATURE, + VP8_STATUS_SUSPENDED, + VP8_STATUS_USER_ABORT, + VP8_STATUS_NOT_ENOUGH_DATA +} VP8StatusCode; + +//------------------------------------------------------------------------------ +// Incremental decoding +// +// This API allows streamlined decoding of partial data. +// Picture can be incrementally decoded as data become available thanks to the +// WebPIDecoder object. This object can be left in a SUSPENDED state if the +// picture is only partially decoded, pending additional input. +// Code example: +// +// WebPInitDecBuffer(&buffer); +// buffer.colorspace = mode; +// ... +// WebPIDecoder* idec = WebPINewDecoder(&buffer); +// while (has_more_data) { +// // ... (get additional data) +// status = WebPIAppend(idec, new_data, new_data_size); +// if (status != VP8_STATUS_SUSPENDED || +// break; +// } +// +// // The above call decodes the current available buffer. +// // Part of the image can now be refreshed by calling to +// // WebPIDecGetRGB()/WebPIDecGetYUVA() etc. +// } +// WebPIDelete(idec); + +// Creates a new incremental decoder with the supplied buffer parameter. +// This output_buffer can be passed NULL, in which case a default output buffer +// is used (with MODE_RGB). Otherwise, an internal reference to 'output_buffer' +// is kept, which means that the lifespan of 'output_buffer' must be larger than +// that of the returned WebPIDecoder object. +// The supplied 'output_buffer' content MUST NOT be changed between calls to +// WebPIAppend() or WebPIUpdate() unless 'output_buffer.is_external_memory' is +// set to 1. In such a case, it is allowed to modify the pointers, size and +// stride of output_buffer.u.RGBA or output_buffer.u.YUVA, provided they remain +// within valid bounds. +// All other fields of WebPDecBuffer MUST remain constant between calls. +// Returns NULL if the allocation failed. +WEBP_EXTERN(WebPIDecoder*) WebPINewDecoder(WebPDecBuffer* output_buffer); + +// This function allocates and initializes an incremental-decoder object, which +// will output the RGB/A samples specified by 'csp' into a preallocated +// buffer 'output_buffer'. The size of this buffer is at least +// 'output_buffer_size' and the stride (distance in bytes between two scanlines) +// is specified by 'output_stride'. +// Additionally, output_buffer can be passed NULL in which case the output +// buffer will be allocated automatically when the decoding starts. The +// colorspace 'csp' is taken into account for allocating this buffer. All other +// parameters are ignored. +// Returns NULL if the allocation failed, or if some parameters are invalid. +WEBP_EXTERN(WebPIDecoder*) WebPINewRGB( + WEBP_CSP_MODE csp, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// This function allocates and initializes an incremental-decoder object, which +// will output the raw luma/chroma samples into a preallocated planes if +// supplied. The luma plane is specified by its pointer 'luma', its size +// 'luma_size' and its stride 'luma_stride'. Similarly, the chroma-u plane +// is specified by the 'u', 'u_size' and 'u_stride' parameters, and the chroma-v +// plane by 'v' and 'v_size'. And same for the alpha-plane. The 'a' pointer +// can be pass NULL in case one is not interested in the transparency plane. +// Conversely, 'luma' can be passed NULL if no preallocated planes are supplied. +// In this case, the output buffer will be automatically allocated (using +// MODE_YUVA) when decoding starts. All parameters are then ignored. +// Returns NULL if the allocation failed or if a parameter is invalid. +WEBP_EXTERN(WebPIDecoder*) WebPINewYUVA( + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride, + uint8_t* a, size_t a_size, int a_stride); + +// Deprecated version of the above, without the alpha plane. +// Kept for backward compatibility. +WEBP_EXTERN(WebPIDecoder*) WebPINewYUV( + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride); + +// Deletes the WebPIDecoder object and associated memory. Must always be called +// if WebPINewDecoder, WebPINewRGB or WebPINewYUV succeeded. +WEBP_EXTERN(void) WebPIDelete(WebPIDecoder* idec); + +// Copies and decodes the next available data. Returns VP8_STATUS_OK when +// the image is successfully decoded. Returns VP8_STATUS_SUSPENDED when more +// data is expected. Returns error in other cases. +WEBP_EXTERN(VP8StatusCode) WebPIAppend( + WebPIDecoder* idec, const uint8_t* data, size_t data_size); + +// A variant of the above function to be used when data buffer contains +// partial data from the beginning. In this case data buffer is not copied +// to the internal memory. +// Note that the value of the 'data' pointer can change between calls to +// WebPIUpdate, for instance when the data buffer is resized to fit larger data. +WEBP_EXTERN(VP8StatusCode) WebPIUpdate( + WebPIDecoder* idec, const uint8_t* data, size_t data_size); + +// Returns the RGB/A image decoded so far. Returns NULL if output params +// are not initialized yet. The RGB/A output type corresponds to the colorspace +// specified during call to WebPINewDecoder() or WebPINewRGB(). +// *last_y is the index of last decoded row in raster scan order. Some pointers +// (*last_y, *width etc.) can be NULL if corresponding information is not +// needed. +WEBP_EXTERN(uint8_t*) WebPIDecGetRGB( + const WebPIDecoder* idec, int* last_y, + int* width, int* height, int* stride); + +// Same as above function to get a YUVA image. Returns pointer to the luma +// plane or NULL in case of error. If there is no alpha information +// the alpha pointer '*a' will be returned NULL. +WEBP_EXTERN(uint8_t*) WebPIDecGetYUVA( + const WebPIDecoder* idec, int* last_y, + uint8_t** u, uint8_t** v, uint8_t** a, + int* width, int* height, int* stride, int* uv_stride, int* a_stride); + +// Deprecated alpha-less version of WebPIDecGetYUVA(): it will ignore the +// alpha information (if present). Kept for backward compatibility. +static WEBP_INLINE uint8_t* WebPIDecGetYUV( + const WebPIDecoder* idec, int* last_y, uint8_t** u, uint8_t** v, + int* width, int* height, int* stride, int* uv_stride) { + return WebPIDecGetYUVA(idec, last_y, u, v, NULL, width, height, + stride, uv_stride, NULL); +} + +// Generic call to retrieve information about the displayable area. +// If non NULL, the left/right/width/height pointers are filled with the visible +// rectangular area so far. +// Returns NULL in case the incremental decoder object is in an invalid state. +// Otherwise returns the pointer to the internal representation. This structure +// is read-only, tied to WebPIDecoder's lifespan and should not be modified. +WEBP_EXTERN(const WebPDecBuffer*) WebPIDecodedArea( + const WebPIDecoder* idec, int* left, int* top, int* width, int* height); + +//------------------------------------------------------------------------------ +// Advanced decoding parametrization +// +// Code sample for using the advanced decoding API +/* + // A) Init a configuration object + WebPDecoderConfig config; + CHECK(WebPInitDecoderConfig(&config)); + + // B) optional: retrieve the bitstream's features. + CHECK(WebPGetFeatures(data, data_size, &config.input) == VP8_STATUS_OK); + + // C) Adjust 'config', if needed + config.no_fancy_upsampling = 1; + config.output.colorspace = MODE_BGRA; + // etc. + + // Note that you can also make config.output point to an externally + // supplied memory buffer, provided it's big enough to store the decoded + // picture. Otherwise, config.output will just be used to allocate memory + // and store the decoded picture. + + // D) Decode! + CHECK(WebPDecode(data, data_size, &config) == VP8_STATUS_OK); + + // E) Decoded image is now in config.output (and config.output.u.RGBA) + + // F) Reclaim memory allocated in config's object. It's safe to call + // this function even if the memory is external and wasn't allocated + // by WebPDecode(). + WebPFreeDecBuffer(&config.output); +*/ + +// Features gathered from the bitstream +struct WebPBitstreamFeatures { + int width; // Width in pixels, as read from the bitstream. + int height; // Height in pixels, as read from the bitstream. + int has_alpha; // True if the bitstream contains an alpha channel. + int has_animation; // True if the bitstream is an animation. + + // Unused for now: + int bitstream_version; // should be 0 for now. TODO(later) + int no_incremental_decoding; // if true, using incremental decoding is not + // recommended. + int rotate; // TODO(later) + int uv_sampling; // should be 0 for now. TODO(later) + uint32_t pad[2]; // padding for later use +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(VP8StatusCode) WebPGetFeaturesInternal( + const uint8_t*, size_t, WebPBitstreamFeatures*, int); + +// Retrieve features from the bitstream. The *features structure is filled +// with information gathered from the bitstream. +// Returns VP8_STATUS_OK when the features are successfully retrieved. Returns +// VP8_STATUS_NOT_ENOUGH_DATA when more data is needed to retrieve the +// features from headers. Returns error in other cases. +static WEBP_INLINE VP8StatusCode WebPGetFeatures( + const uint8_t* data, size_t data_size, + WebPBitstreamFeatures* features) { + return WebPGetFeaturesInternal(data, data_size, features, + WEBP_DECODER_ABI_VERSION); +} + +// Decoding options +struct WebPDecoderOptions { + int bypass_filtering; // if true, skip the in-loop filtering + int no_fancy_upsampling; // if true, use faster pointwise upsampler + int use_cropping; // if true, cropping is applied _first_ + int crop_left, crop_top; // top-left position for cropping. + // Will be snapped to even values. + int crop_width, crop_height; // dimension of the cropping area + int use_scaling; // if true, scaling is applied _afterward_ + int scaled_width, scaled_height; // final resolution + int use_threads; // if true, use multi-threaded decoding + + // Unused for now: + int force_rotation; // forced rotation (to be applied _last_) + int no_enhancement; // if true, discard enhancement layer + uint32_t pad[6]; // padding for later use +}; + +// Main object storing the configuration for advanced decoding. +struct WebPDecoderConfig { + WebPBitstreamFeatures input; // Immutable bitstream features (optional) + WebPDecBuffer output; // Output buffer (can point to external mem) + WebPDecoderOptions options; // Decoding options +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPInitDecoderConfigInternal(WebPDecoderConfig*, int); + +// Initialize the configuration as empty. This function must always be +// called first, unless WebPGetFeatures() is to be called. +// Returns false in case of mismatched version. +static WEBP_INLINE int WebPInitDecoderConfig(WebPDecoderConfig* config) { + return WebPInitDecoderConfigInternal(config, WEBP_DECODER_ABI_VERSION); +} + +// Instantiate a new incremental decoder object with the requested +// configuration. The bitstream can be passed using 'data' and 'data_size' +// parameter, in which case the features will be parsed and stored into +// config->input. Otherwise, 'data' can be NULL and no parsing will occur. +// Note that 'config' can be NULL too, in which case a default configuration +// is used. +// The return WebPIDecoder object must always be deleted calling WebPIDelete(). +// Returns NULL in case of error (and config->status will then reflect +// the error condition). +WEBP_EXTERN(WebPIDecoder*) WebPIDecode(const uint8_t* data, size_t data_size, + WebPDecoderConfig* config); + +// Non-incremental version. This version decodes the full data at once, taking +// 'config' into account. Returns decoding status (which should be VP8_STATUS_OK +// if the decoding was successful). +WEBP_EXTERN(VP8StatusCode) WebPDecode(const uint8_t* data, size_t data_size, + WebPDecoderConfig* config); + +#if defined(__cplusplus) || defined(c_plusplus) +} // extern "C" +#endif + +#endif /* WEBP_WEBP_DECODE_H_ */ diff --git a/src/SDL2/VisualC/external/include/webp/encode.h b/src/SDL2/VisualC/external/include/webp/encode.h new file mode 100644 index 000000000..d635fcf0e --- /dev/null +++ b/src/SDL2/VisualC/external/include/webp/encode.h @@ -0,0 +1,485 @@ +// Copyright 2011 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// WebP encoder: main interface +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_ENCODE_H_ +#define WEBP_WEBP_ENCODE_H_ + +#include "./types.h" + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +#define WEBP_ENCODER_ABI_VERSION 0x0201 // MAJOR(8b) + MINOR(8b) + +// Note: forward declaring enumerations is not allowed in (strict) C and C++, +// the types are left here for reference. +// typedef enum WebPImageHint WebPImageHint; +// typedef enum WebPEncCSP WebPEncCSP; +// typedef enum WebPPreset WebPPreset; +// typedef enum WebPEncodingError WebPEncodingError; +typedef struct WebPConfig WebPConfig; +typedef struct WebPPicture WebPPicture; // main structure for I/O +typedef struct WebPAuxStats WebPAuxStats; +typedef struct WebPMemoryWriter WebPMemoryWriter; + +// Return the encoder's version number, packed in hexadecimal using 8bits for +// each of major/minor/revision. E.g: v2.5.7 is 0x020507. +WEBP_EXTERN(int) WebPGetEncoderVersion(void); + +//------------------------------------------------------------------------------ +// One-stop-shop call! No questions asked: + +// Returns the size of the compressed data (pointed to by *output), or 0 if +// an error occurred. The compressed data must be released by the caller +// using the call 'free(*output)'. +// These functions compress using the lossy format, and the quality_factor +// can go from 0 (smaller output, lower quality) to 100 (best quality, +// larger output). +WEBP_EXTERN(size_t) WebPEncodeRGB(const uint8_t* rgb, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeBGR(const uint8_t* bgr, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeRGBA(const uint8_t* rgba, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeBGRA(const uint8_t* bgra, + int width, int height, int stride, + float quality_factor, uint8_t** output); + +// These functions are the equivalent of the above, but compressing in a +// lossless manner. Files are usually larger than lossy format, but will +// not suffer any compression loss. +WEBP_EXTERN(size_t) WebPEncodeLosslessRGB(const uint8_t* rgb, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessBGR(const uint8_t* bgr, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessRGBA(const uint8_t* rgba, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessBGRA(const uint8_t* bgra, + int width, int height, int stride, + uint8_t** output); + +//------------------------------------------------------------------------------ +// Coding parameters + +// Image characteristics hint for the underlying encoder. +typedef enum WebPImageHint { + WEBP_HINT_DEFAULT = 0, // default preset. + WEBP_HINT_PICTURE, // digital picture, like portrait, inner shot + WEBP_HINT_PHOTO, // outdoor photograph, with natural lighting + WEBP_HINT_GRAPH, // Discrete tone image (graph, map-tile etc). + WEBP_HINT_LAST +} WebPImageHint; + +// Compression parameters. +struct WebPConfig { + int lossless; // Lossless encoding (0=lossy(default), 1=lossless). + float quality; // between 0 (smallest file) and 100 (biggest) + int method; // quality/speed trade-off (0=fast, 6=slower-better) + + WebPImageHint image_hint; // Hint for image type (lossless only for now). + + // Parameters related to lossy compression only: + int target_size; // if non-zero, set the desired target size in bytes. + // Takes precedence over the 'compression' parameter. + float target_PSNR; // if non-zero, specifies the minimal distortion to + // try to achieve. Takes precedence over target_size. + int segments; // maximum number of segments to use, in [1..4] + int sns_strength; // Spatial Noise Shaping. 0=off, 100=maximum. + int filter_strength; // range: [0 = off .. 100 = strongest] + int filter_sharpness; // range: [0 = off .. 7 = least sharp] + int filter_type; // filtering type: 0 = simple, 1 = strong (only used + // if filter_strength > 0 or autofilter > 0) + int autofilter; // Auto adjust filter's strength [0 = off, 1 = on] + int alpha_compression; // Algorithm for encoding the alpha plane (0 = none, + // 1 = compressed with WebP lossless). Default is 1. + int alpha_filtering; // Predictive filtering method for alpha plane. + // 0: none, 1: fast, 2: best. Default if 1. + int alpha_quality; // Between 0 (smallest size) and 100 (lossless). + // Default is 100. + int pass; // number of entropy-analysis passes (in [1..10]). + + int show_compressed; // if true, export the compressed picture back. + // In-loop filtering is not applied. + int preprocessing; // preprocessing filter (0=none, 1=segment-smooth) + int partitions; // log2(number of token partitions) in [0..3]. Default + // is set to 0 for easier progressive decoding. + int partition_limit; // quality degradation allowed to fit the 512k limit + // on prediction modes coding (0: no degradation, + // 100: maximum possible degradation). + int emulate_jpeg_size; // If true, compression parameters will be remapped + // to better match the expected output size from + // JPEG compression. Generally, the output size will + // be similar but the degradation will be lower. + int thread_level; // If non-zero, try and use multi-threaded encoding. + int low_memory; // If set, reduce memory usage (but increase CPU use). + + uint32_t pad[5]; // padding for later use +}; + +// Enumerate some predefined settings for WebPConfig, depending on the type +// of source picture. These presets are used when calling WebPConfigPreset(). +typedef enum WebPPreset { + WEBP_PRESET_DEFAULT = 0, // default preset. + WEBP_PRESET_PICTURE, // digital picture, like portrait, inner shot + WEBP_PRESET_PHOTO, // outdoor photograph, with natural lighting + WEBP_PRESET_DRAWING, // hand or line drawing, with high-contrast details + WEBP_PRESET_ICON, // small-sized colorful images + WEBP_PRESET_TEXT // text-like +} WebPPreset; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPConfigInitInternal(WebPConfig*, WebPPreset, float, int); + +// Should always be called, to initialize a fresh WebPConfig structure before +// modification. Returns false in case of version mismatch. WebPConfigInit() +// must have succeeded before using the 'config' object. +// Note that the default values are lossless=0 and quality=75. +static WEBP_INLINE int WebPConfigInit(WebPConfig* config) { + return WebPConfigInitInternal(config, WEBP_PRESET_DEFAULT, 75.f, + WEBP_ENCODER_ABI_VERSION); +} + +// This function will initialize the configuration according to a predefined +// set of parameters (referred to by 'preset') and a given quality factor. +// This function can be called as a replacement to WebPConfigInit(). Will +// return false in case of error. +static WEBP_INLINE int WebPConfigPreset(WebPConfig* config, + WebPPreset preset, float quality) { + return WebPConfigInitInternal(config, preset, quality, + WEBP_ENCODER_ABI_VERSION); +} + +// Returns true if 'config' is non-NULL and all configuration parameters are +// within their valid ranges. +WEBP_EXTERN(int) WebPValidateConfig(const WebPConfig* config); + +//------------------------------------------------------------------------------ +// Input / Output +// Structure for storing auxiliary statistics (mostly for lossy encoding). + +struct WebPAuxStats { + int coded_size; // final size + + float PSNR[5]; // peak-signal-to-noise ratio for Y/U/V/All/Alpha + int block_count[3]; // number of intra4/intra16/skipped macroblocks + int header_bytes[2]; // approximate number of bytes spent for header + // and mode-partition #0 + int residual_bytes[3][4]; // approximate number of bytes spent for + // DC/AC/uv coefficients for each (0..3) segments. + int segment_size[4]; // number of macroblocks in each segments + int segment_quant[4]; // quantizer values for each segments + int segment_level[4]; // filtering strength for each segments [0..63] + + int alpha_data_size; // size of the transparency data + int layer_data_size; // size of the enhancement layer data + + // lossless encoder statistics + uint32_t lossless_features; // bit0:predictor bit1:cross-color transform + // bit2:subtract-green bit3:color indexing + int histogram_bits; // number of precision bits of histogram + int transform_bits; // precision bits for transform + int cache_bits; // number of bits for color cache lookup + int palette_size; // number of color in palette, if used + int lossless_size; // final lossless size + + uint32_t pad[4]; // padding for later use +}; + +// Signature for output function. Should return true if writing was successful. +// data/data_size is the segment of data to write, and 'picture' is for +// reference (and so one can make use of picture->custom_ptr). +typedef int (*WebPWriterFunction)(const uint8_t* data, size_t data_size, + const WebPPicture* picture); + +// WebPMemoryWrite: a special WebPWriterFunction that writes to memory using +// the following WebPMemoryWriter object (to be set as a custom_ptr). +struct WebPMemoryWriter { + uint8_t* mem; // final buffer (of size 'max_size', larger than 'size'). + size_t size; // final size + size_t max_size; // total capacity + uint32_t pad[1]; // padding for later use +}; + +// The following must be called first before any use. +WEBP_EXTERN(void) WebPMemoryWriterInit(WebPMemoryWriter* writer); + +// The custom writer to be used with WebPMemoryWriter as custom_ptr. Upon +// completion, writer.mem and writer.size will hold the coded data. +// writer.mem must be freed using the call 'free(writer.mem)'. +WEBP_EXTERN(int) WebPMemoryWrite(const uint8_t* data, size_t data_size, + const WebPPicture* picture); + +// Progress hook, called from time to time to report progress. It can return +// false to request an abort of the encoding process, or true otherwise if +// everything is OK. +typedef int (*WebPProgressHook)(int percent, const WebPPicture* picture); + +// Color spaces. +typedef enum WebPEncCSP { + // chroma sampling + WEBP_YUV420 = 0, // 4:2:0 + WEBP_YUV422 = 1, // 4:2:2 + WEBP_YUV444 = 2, // 4:4:4 + WEBP_YUV400 = 3, // grayscale + WEBP_CSP_UV_MASK = 3, // bit-mask to get the UV sampling factors + // alpha channel variants + WEBP_YUV420A = 4, + WEBP_YUV422A = 5, + WEBP_YUV444A = 6, + WEBP_YUV400A = 7, // grayscale + alpha + WEBP_CSP_ALPHA_BIT = 4 // bit that is set if alpha is present +} WebPEncCSP; + +// Encoding error conditions. +typedef enum WebPEncodingError { + VP8_ENC_OK = 0, + VP8_ENC_ERROR_OUT_OF_MEMORY, // memory error allocating objects + VP8_ENC_ERROR_BITSTREAM_OUT_OF_MEMORY, // memory error while flushing bits + VP8_ENC_ERROR_NULL_PARAMETER, // a pointer parameter is NULL + VP8_ENC_ERROR_INVALID_CONFIGURATION, // configuration is invalid + VP8_ENC_ERROR_BAD_DIMENSION, // picture has invalid width/height + VP8_ENC_ERROR_PARTITION0_OVERFLOW, // partition is bigger than 512k + VP8_ENC_ERROR_PARTITION_OVERFLOW, // partition is bigger than 16M + VP8_ENC_ERROR_BAD_WRITE, // error while flushing bytes + VP8_ENC_ERROR_FILE_TOO_BIG, // file is bigger than 4G + VP8_ENC_ERROR_USER_ABORT, // abort request by user + VP8_ENC_ERROR_LAST // list terminator. always last. +} WebPEncodingError; + +// maximum width/height allowed (inclusive), in pixels +#define WEBP_MAX_DIMENSION 16383 + +// Main exchange structure (input samples, output bytes, statistics) +struct WebPPicture { + // INPUT + ////////////// + // Main flag for encoder selecting between ARGB or YUV input. + // It is recommended to use ARGB input (*argb, argb_stride) for lossless + // compression, and YUV input (*y, *u, *v, etc.) for lossy compression + // since these are the respective native colorspace for these formats. + int use_argb; + + // YUV input (mostly used for input to lossy compression) + WebPEncCSP colorspace; // colorspace: should be YUV420 for now (=Y'CbCr). + int width, height; // dimensions (less or equal to WEBP_MAX_DIMENSION) + uint8_t *y, *u, *v; // pointers to luma/chroma planes. + int y_stride, uv_stride; // luma/chroma strides. + uint8_t* a; // pointer to the alpha plane + int a_stride; // stride of the alpha plane + uint32_t pad1[2]; // padding for later use + + // ARGB input (mostly used for input to lossless compression) + uint32_t* argb; // Pointer to argb (32 bit) plane. + int argb_stride; // This is stride in pixels units, not bytes. + uint32_t pad2[3]; // padding for later use + + // OUTPUT + /////////////// + // Byte-emission hook, to store compressed bytes as they are ready. + WebPWriterFunction writer; // can be NULL + void* custom_ptr; // can be used by the writer. + + // map for extra information (only for lossy compression mode) + int extra_info_type; // 1: intra type, 2: segment, 3: quant + // 4: intra-16 prediction mode, + // 5: chroma prediction mode, + // 6: bit cost, 7: distortion + uint8_t* extra_info; // if not NULL, points to an array of size + // ((width + 15) / 16) * ((height + 15) / 16) that + // will be filled with a macroblock map, depending + // on extra_info_type. + + // STATS AND REPORTS + /////////////////////////// + // Pointer to side statistics (updated only if not NULL) + WebPAuxStats* stats; + + // Error code for the latest error encountered during encoding + WebPEncodingError error_code; + + // If not NULL, report progress during encoding. + WebPProgressHook progress_hook; + + void* user_data; // this field is free to be set to any value and + // used during callbacks (like progress-report e.g.). + + uint32_t pad3[3]; // padding for later use + + // Unused for now: original samples (for non-YUV420 modes) + uint8_t *u0, *v0; + int uv0_stride; + + uint32_t pad4[7]; // padding for later use + + // PRIVATE FIELDS + //////////////////// + void* memory_; // row chunk of memory for yuva planes + void* memory_argb_; // and for argb too. + void* pad5[2]; // padding for later use +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPPictureInitInternal(WebPPicture*, int); + +// Should always be called, to initialize the structure. Returns false in case +// of version mismatch. WebPPictureInit() must have succeeded before using the +// 'picture' object. +// Note that, by default, use_argb is false and colorspace is WEBP_YUV420. +static WEBP_INLINE int WebPPictureInit(WebPPicture* picture) { + return WebPPictureInitInternal(picture, WEBP_ENCODER_ABI_VERSION); +} + +//------------------------------------------------------------------------------ +// WebPPicture utils + +// Convenience allocation / deallocation based on picture->width/height: +// Allocate y/u/v buffers as per colorspace/width/height specification. +// Note! This function will free the previous buffer if needed. +// Returns false in case of memory error. +WEBP_EXTERN(int) WebPPictureAlloc(WebPPicture* picture); + +// Release the memory allocated by WebPPictureAlloc() or WebPPictureImport*(). +// Note that this function does _not_ free the memory used by the 'picture' +// object itself. +// Besides memory (which is reclaimed) all other fields of 'picture' are +// preserved. +WEBP_EXTERN(void) WebPPictureFree(WebPPicture* picture); + +// Copy the pixels of *src into *dst, using WebPPictureAlloc. Upon return, +// *dst will fully own the copied pixels (this is not a view). +// Returns false in case of memory allocation error. +WEBP_EXTERN(int) WebPPictureCopy(const WebPPicture* src, WebPPicture* dst); + +// Compute PSNR, SSIM or LSIM distortion metric between two pictures. +// Result is in dB, stores in result[] in the Y/U/V/Alpha/All order. +// Returns false in case of error (src and ref don't have same dimension, ...) +// Warning: this function is rather CPU-intensive. +WEBP_EXTERN(int) WebPPictureDistortion( + const WebPPicture* src, const WebPPicture* ref, + int metric_type, // 0 = PSNR, 1 = SSIM, 2 = LSIM + float result[5]); + +// self-crops a picture to the rectangle defined by top/left/width/height. +// Returns false in case of memory allocation error, or if the rectangle is +// outside of the source picture. +// The rectangle for the view is defined by the top-left corner pixel +// coordinates (left, top) as well as its width and height. This rectangle +// must be fully be comprised inside the 'src' source picture. If the source +// picture uses the YUV420 colorspace, the top and left coordinates will be +// snapped to even values. +WEBP_EXTERN(int) WebPPictureCrop(WebPPicture* picture, + int left, int top, int width, int height); + +// Extracts a view from 'src' picture into 'dst'. The rectangle for the view +// is defined by the top-left corner pixel coordinates (left, top) as well +// as its width and height. This rectangle must be fully be comprised inside +// the 'src' source picture. If the source picture uses the YUV420 colorspace, +// the top and left coordinates will be snapped to even values. +// Picture 'src' must out-live 'dst' picture. Self-extraction of view is allowed +// ('src' equal to 'dst') as a mean of fast-cropping (but note that doing so, +// the original dimension will be lost). +// Returns false in case of memory allocation error or invalid parameters. +WEBP_EXTERN(int) WebPPictureView(const WebPPicture* src, + int left, int top, int width, int height, + WebPPicture* dst); + +// Returns true if the 'picture' is actually a view and therefore does +// not own the memory for pixels. +WEBP_EXTERN(int) WebPPictureIsView(const WebPPicture* picture); + +// Rescale a picture to new dimension width x height. +// Now gamma correction is applied. +// Returns false in case of error (invalid parameter or insufficient memory). +WEBP_EXTERN(int) WebPPictureRescale(WebPPicture* pic, int width, int height); + +// Colorspace conversion function to import RGB samples. +// Previous buffer will be free'd, if any. +// *rgb buffer should have a size of at least height * rgb_stride. +// Returns false in case of memory error. +WEBP_EXTERN(int) WebPPictureImportRGB( + WebPPicture* picture, const uint8_t* rgb, int rgb_stride); +// Same, but for RGBA buffer. +WEBP_EXTERN(int) WebPPictureImportRGBA( + WebPPicture* picture, const uint8_t* rgba, int rgba_stride); +// Same, but for RGBA buffer. Imports the RGB direct from the 32-bit format +// input buffer ignoring the alpha channel. Avoids needing to copy the data +// to a temporary 24-bit RGB buffer to import the RGB only. +WEBP_EXTERN(int) WebPPictureImportRGBX( + WebPPicture* picture, const uint8_t* rgbx, int rgbx_stride); + +// Variants of the above, but taking BGR(A|X) input. +WEBP_EXTERN(int) WebPPictureImportBGR( + WebPPicture* picture, const uint8_t* bgr, int bgr_stride); +WEBP_EXTERN(int) WebPPictureImportBGRA( + WebPPicture* picture, const uint8_t* bgra, int bgra_stride); +WEBP_EXTERN(int) WebPPictureImportBGRX( + WebPPicture* picture, const uint8_t* bgrx, int bgrx_stride); + +// Converts picture->argb data to the YUVA format specified by 'colorspace'. +// Upon return, picture->use_argb is set to false. The presence of real +// non-opaque transparent values is detected, and 'colorspace' will be +// adjusted accordingly. Note that this method is lossy. +// Returns false in case of error. +WEBP_EXTERN(int) WebPPictureARGBToYUVA(WebPPicture* picture, + WebPEncCSP colorspace); + +// Converts picture->yuv to picture->argb and sets picture->use_argb to true. +// The input format must be YUV_420 or YUV_420A. +// Note that the use of this method is discouraged if one has access to the +// raw ARGB samples, since using YUV420 is comparatively lossy. Also, the +// conversion from YUV420 to ARGB incurs a small loss too. +// Returns false in case of error. +WEBP_EXTERN(int) WebPPictureYUVAToARGB(WebPPicture* picture); + +// Helper function: given a width x height plane of YUV(A) samples +// (with stride 'stride'), clean-up the YUV samples under fully transparent +// area, to help compressibility (no guarantee, though). +WEBP_EXTERN(void) WebPCleanupTransparentArea(WebPPicture* picture); + +// Scan the picture 'picture' for the presence of non fully opaque alpha values. +// Returns true in such case. Otherwise returns false (indicating that the +// alpha plane can be ignored altogether e.g.). +WEBP_EXTERN(int) WebPPictureHasTransparency(const WebPPicture* picture); + +// Remove the transparency information (if present) by blending the color with +// the background color 'background_rgb' (specified as 24bit RGB triplet). +// After this call, all alpha values are reset to 0xff. +WEBP_EXTERN(void) WebPBlendAlpha(WebPPicture* pic, uint32_t background_rgb); + +//------------------------------------------------------------------------------ +// Main call + +// Main encoding call, after config and picture have been initialized. +// 'picture' must be less than 16384x16384 in dimension (cf WEBP_MAX_DIMENSION), +// and the 'config' object must be a valid one. +// Returns false in case of error, true otherwise. +// In case of error, picture->error_code is updated accordingly. +// 'picture' can hold the source samples in both YUV(A) or ARGB input, depending +// on the value of 'picture->use_argb'. It is highly recommended to use +// the former for lossy encoding, and the latter for lossless encoding +// (when config.lossless is true). Automatic conversion from one format to +// another is provided but they both incur some loss. +WEBP_EXTERN(int) WebPEncode(const WebPConfig* config, WebPPicture* picture); + +//------------------------------------------------------------------------------ + +#if defined(__cplusplus) || defined(c_plusplus) +} // extern "C" +#endif + +#endif /* WEBP_WEBP_ENCODE_H_ */ diff --git a/src/SDL2/VisualC/external/include/webp/types.h b/src/SDL2/VisualC/external/include/webp/types.h new file mode 100644 index 000000000..3e27190be --- /dev/null +++ b/src/SDL2/VisualC/external/include/webp/types.h @@ -0,0 +1,45 @@ +// Copyright 2010 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// Common types +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_TYPES_H_ +#define WEBP_WEBP_TYPES_H_ + +#include // for size_t + +#ifndef _MSC_VER +#include +#ifdef __STRICT_ANSI__ +#define WEBP_INLINE +#else /* __STRICT_ANSI__ */ +#define WEBP_INLINE inline +#endif +#else +typedef signed char int8_t; +typedef unsigned char uint8_t; +typedef signed short int16_t; +typedef unsigned short uint16_t; +typedef signed int int32_t; +typedef unsigned int uint32_t; +typedef unsigned long long int uint64_t; +typedef long long int int64_t; +#define WEBP_INLINE __forceinline +#endif /* _MSC_VER */ + +#ifndef WEBP_EXTERN +// This explicitly marks library functions and allows for changing the +// signature for e.g., Windows DLL builds. +#define WEBP_EXTERN(type) extern type +#endif /* WEBP_EXTERN */ + +// Macro to check ABI compatibility (same major revision number) +#define WEBP_ABI_IS_INCOMPATIBLE(a, b) (((a) >> 8) != ((b) >> 8)) + +#endif /* WEBP_WEBP_TYPES_H_ */ diff --git a/src/SDL2/VisualC/external/include/zconf.h b/src/SDL2/VisualC/external/include/zconf.h new file mode 100755 index 000000000..996fff292 --- /dev/null +++ b/src/SDL2/VisualC/external/include/zconf.h @@ -0,0 +1,511 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2013 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzvprintf z_gzvprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetHeader z_inflateGetHeader +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateSetDictionary z_inflateSetDictionary +# define inflateGetDictionary z_inflateGetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateResetKeep z_inflateResetKeep +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +#ifndef Z_ARG /* function prototypes for stdarg */ +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#if 1 /* was set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#if 1 /* was set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/src/SDL2/VisualC/external/include/zlib.h b/src/SDL2/VisualC/external/include/zlib.h new file mode 100755 index 000000000..3e0c7672a --- /dev/null +++ b/src/SDL2/VisualC/external/include/zlib.h @@ -0,0 +1,1768 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.2.8, April 28th, 2013 + + Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 + (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). +*/ + +#ifndef ZLIB_H +#define ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.2.8" +#define ZLIB_VERNUM 0x1280 +#define ZLIB_VER_MAJOR 1 +#define ZLIB_VER_MINOR 2 +#define ZLIB_VER_REVISION 8 +#define ZLIB_VER_SUBREVISION 0 + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed data. + This version of the library supports only one compression method (deflation) + but other algorithms will be added later and will have the same stream + interface. + + Compression can be done in a single step if the buffers are large enough, + or can be done by repeated calls of the compression function. In the latter + case, the application must provide more input and/or consume the output + (providing more output space) before each call. + + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio using the functions that start + with "gz". The gzip format is different from the zlib format. gzip is a + gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + + This library can optionally read and write gzip streams in memory as well. + + The zlib format was designed to be compact and fast for use in memory + and on communications channels. The gzip format was designed for single- + file compression on file systems, has a larger header than zlib to maintain + directory information, and uses a different, slower check method than zlib. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never crash + even in case of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + z_const Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total number of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total number of bytes output so far */ + + z_const char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: binary or text */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + +/* + The application must update next_in and avail_in when avail_in has dropped + to zero. It must update next_out and avail_out when avail_out has dropped + to zero. The application must initialize zalloc, zfree and opaque before + calling the init function. All other fields are set by the compression + library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this if + the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers + returned by zalloc for objects of exactly 65536 bytes *must* have their + offset normalized to zero. The default allocation function provided by this + library ensures this (see zutil.c). To reduce memory requirements and avoid + any allocation of 64K objects, at the expense of compression ratio, compile + the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or progress + reports. After compression, total_in holds the total size of the + uncompressed data and may be saved for use in the decompressor (particularly + if the decompressor wants to decompress everything in a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +#define Z_BLOCK 5 +#define Z_TREES 6 +/* Allowed flush values; see deflate() and inflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative values + * are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_RLE 3 +#define Z_FIXED 4 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ +#define Z_UNKNOWN 2 +/* Possible values of the data_type field (though see inflate()) */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is not + compatible with the zlib.h header file used by the application. This check + is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. If + zalloc and zfree are set to Z_NULL, deflateInit updates them to use default + allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at all + (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION + requests a default compromise between speed and compression (currently + equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if level is not a valid compression level, or + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). msg is set to null + if there is no error message. deflateInit does not perform any compression: + this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). Some + output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating avail_in or avail_out accordingly; avail_out should + never be zero before the call. The application can consume the compressed + output when it wants, for example when the output buffer is full (avail_out + == 0), or after each call of deflate(). If deflate returns Z_OK and with + zero avail_out, it must be called again after making room in the output + buffer because there might be more output pending. + + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumulate before producing output, in order to + maximize compression. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In + particular avail_in is zero after the call if enough output space has been + provided before the call.) Flushing may degrade compression for some + compression algorithms and so it should be used only when necessary. This + completes the current deflate block and follows it with an empty stored block + that is three bits plus filler bits to the next byte, followed by four bytes + (00 00 ff ff). + + If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the + output buffer, but the output is not aligned to a byte boundary. All of the + input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. + This completes the current deflate block and follows it with an empty fixed + codes block that is 10 bits long. This assures that enough bytes are output + in order for the decompressor to finish the block before the empty fixed code + block. + + If flush is set to Z_BLOCK, a deflate block is completed and emitted, as + for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to + seven bits of the current block are held to be written as the next byte after + the next deflate block is completed. In this case, the decompressor may not + be provided enough bits at this point in order to complete decompression of + the data provided so far to the compressor. It may need to wait for the next + block to be emitted. This is for advanced applications that need to control + the emission of deflate blocks. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that + avail_out is greater than six to avoid repeated flush markers due to + avail_out == 0 on return. + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there was + enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the stream + are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least the + value returned by deflateBound (see below). Then deflate is guaranteed to + return Z_STREAM_END. If not enough output space is provided, deflate will + not return Z_STREAM_END, and it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so far (that is, total_in bytes). + + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered + binary. This field is only for information purposes and does not affect the + compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not + fatal, and deflate() can be called again with more input and more output + space to continue compressing. +*/ + + +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, msg + may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the + exact value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit does not perform any decompression + apart from possibly reading the zlib header if present: actual decompression + will be done by inflate(). (So next_in and avail_in may be modified, but + next_out and avail_out are unused and unchanged.) The current implementation + of inflateInit() does not process any header information -- that is deferred + until inflate() is called. +*/ + + +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing will + resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there is + no more input data or no more space in the output buffer (see below about + the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating the next_* and avail_* values accordingly. The + application can consume the uncompressed output when it wants, for example + when the output buffer is full (avail_out == 0), or after each call of + inflate(). If inflate returns Z_OK and with zero avail_out, it must be + called again after making room in the output buffer because there might be + more output pending. + + The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, + Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much + output as possible to the output buffer. Z_BLOCK requests that inflate() + stop if and when it gets to the next deflate block boundary. When decoding + the zlib or gzip format, this will cause inflate() to return immediately + after the header and before the first block. When doing a raw inflate, + inflate() will go ahead and process the first block, and will return when it + gets to the end of that block, or when it runs out of data. + + The Z_BLOCK option assists in appending to or combining deflate streams. + Also to assist in this, on return inflate() will set strm->data_type to the + number of unused bits in the last byte taken from strm->next_in, plus 64 if + inflate() is currently decoding the last block in the deflate stream, plus + 128 if inflate() returned immediately after decoding an end-of-block code or + decoding the complete header up to just before the first byte of the deflate + stream. The end-of-block will not be indicated until all of the uncompressed + data from that block has been written to strm->next_out. The number of + unused bits may in general be greater than seven, except when bit 7 of + data_type is set, in which case the number of unused bits will be less than + eight. data_type is set as noted here every time inflate() returns for all + flush options, and so can be used to determine the amount of currently + consumed input in bits. + + The Z_TREES option behaves as Z_BLOCK does, but it also returns when the + end of each deflate block header is reached, before any actual data in that + block is decoded. This allows the caller to determine the length of the + deflate block header for later use in random access within a deflate block. + 256 is added to the value of strm->data_type when inflate() returns + immediately after reaching the end of the deflate block header. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step (a + single call of inflate), the parameter flush should be set to Z_FINISH. In + this case all pending input is processed and all pending output is flushed; + avail_out must be large enough to hold all of the uncompressed data for the + operation to complete. (The size of the uncompressed data may have been + saved by the compressor for this purpose.) The use of Z_FINISH is not + required to perform an inflation in one step. However it may be used to + inform inflate that a faster approach can be used for the single inflate() + call. Z_FINISH also informs inflate to not maintain a sliding window if the + stream completes, which reduces inflate's memory footprint. If the stream + does not complete, either because not all of the stream is provided or not + enough output space is provided, then a sliding window will be allocated and + inflate() can be called again to continue the operation as if Z_NO_FLUSH had + been used. + + In this implementation, inflate() always flushes as much output as + possible to the output buffer, and always uses the faster approach on the + first call. So the effects of the flush parameter in this implementation are + on the return value of inflate() as noted below, when inflate() returns early + when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of + memory for a sliding window when Z_FINISH is used. + + If a preset dictionary is needed after this call (see inflateSetDictionary + below), inflate sets strm->adler to the Adler-32 checksum of the dictionary + chosen by the compressor and returns Z_NEED_DICT; otherwise it sets + strm->adler to the Adler-32 checksum of all output produced so far (that is, + total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described + below. At the end of the stream, inflate() checks that its computed adler32 + checksum is equal to that saved by the compressor and returns Z_STREAM_END + only if the checksum is correct. + + inflate() can decompress and check either zlib-wrapped or gzip-wrapped + deflate data. The header type is detected automatically, if requested when + initializing with inflateInit2(). Any information contained in the gzip + header is not retained, so applications that need that information should + instead use raw inflate, see inflateInit2() below, or inflateBack() and + perform their own processing of the gzip header and trailer. When processing + gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output + producted so far. The CRC-32 is checked against the gzip trailer. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect check + value), Z_STREAM_ERROR if the stream structure was inconsistent (for example + next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory, + Z_BUF_ERROR if no progress is possible or if there was not enough room in the + output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and + inflate() can be called again with more input and more output space to + continue decompressing. If Z_DATA_ERROR is returned, the application may + then call inflateSync() to look for a good compression block if a partial + recovery of the data is desired. +*/ + + +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by the + caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + windowBits can also be -8..-15 for raw deflate. In this case, -windowBits + determines the window size. deflate() will then generate raw deflate data + with no zlib header or trailer, and will not compute an adler32 check value. + + windowBits can also be greater than 15 for optional gzip encoding. Add + 16 to windowBits to write a simple gzip header and trailer around the + compressed data instead of a zlib wrapper. The gzip header will have no + file name, no extra data, no comment, no modification time (set to zero), no + header crc, and the operating system will be set to 255 (unknown). If a + gzip stream is being written, strm->adler is a crc32 instead of an adler32. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but is + slow and reduces compression ratio; memLevel=9 uses maximum memory for + optimal speed. The default value is 8. See zconf.h for total memory usage + as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match), or Z_RLE to limit match distances to one (run-length + encoding). Filtered data consists mostly of small values with a somewhat + random distribution. In this case, the compression algorithm is tuned to + compress them better. The effect of Z_FILTERED is to force more Huffman + coding and less string matching; it is somewhat intermediate between + Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as + fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The + strategy parameter only affects the compression ratio but not the + correctness of the compressed output even if it is not set appropriately. + Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler + decoder for special applications. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid + method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is + incompatible with the version assumed by the caller (ZLIB_VERSION). msg is + set to null if there is no error message. deflateInit2 does not perform any + compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. When using the zlib format, this + function must be called immediately after deflateInit, deflateInit2 or + deflateReset, and before any call of deflate. When doing raw deflate, this + function must be called either before any call of deflate, or immediately + after the completion of a deflate block, i.e. after all input has been + consumed and all output has been delivered when using any of the flush + options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The + compressor and decompressor must use exactly the same dictionary (see + inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size + provided in deflateInit or deflateInit2. Thus the strings most likely to be + useful should be put at the end of the dictionary, not at the front. In + addition, the current implementation of deflate will use at most the window + size minus 262 bytes of the provided dictionary. + + Upon return of this function, strm->adler is set to the adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) If a raw deflate was requested, then the + adler32 value is not computed and strm->adler is not set. + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if not at a block boundary for raw deflate). deflateSetDictionary does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and can + consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. The + stream will keep the same compression level and any other attributes that + may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different strategy. + If the compression level is changed, the input available so far is + compressed with the old level (and may be flushed); the new level will take + effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to be + compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if + strm->avail_out was zero. +*/ + +ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, + int good_length, + int max_lazy, + int nice_length, + int max_chain)); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + +ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, + uLong sourceLen)); +/* + deflateBound() returns an upper bound on the compressed size after + deflation of sourceLen bytes. It must be called after deflateInit() or + deflateInit2(), and after deflateSetHeader(), if used. This would be used + to allocate an output buffer for deflation in a single pass, and so would be + called before deflate(). If that first deflate() call is provided the + sourceLen input bytes, an output buffer allocated to the size returned by + deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed + to return Z_STREAM_END. Note that it is possible for the compressed size to + be larger than the value returned by deflateBound() if flush options other + than Z_FINISH or Z_NO_FLUSH are used. +*/ + +ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm, + unsigned *pending, + int *bits)); +/* + deflatePending() returns the number of bytes and bits of output that have + been generated, but not yet provided in the available output. The bytes not + provided would be due to the available output space having being consumed. + The number of bits of output not provided are between 0 and 7, where they + await more bits to join them in order to fill out a full byte. If pending + or bits are Z_NULL, then those values are not set. + + deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. + */ + +ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + deflatePrime() inserts bits in the deflate output stream. The intent + is that this function is used to start off the deflate output with the bits + leftover from a previous deflate stream when appending to it. As such, this + function can only be used for raw deflate, and must be used before the first + deflate() call after a deflateInit2() or deflateReset(). bits must be less + than or equal to 16, and that many of the least significant bits of value + will be inserted in the output. + + deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough + room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, + gz_headerp head)); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to 255, with no extra, name, or comment + fields. The gzip header is returned to the default state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. windowBits must be greater than or equal to the windowBits value + provided to deflateInit2() while compressing, or it must be equal to 15 if + deflateInit2() was not used. If a compressed stream with a larger window + size is given as input, inflate() will return with the error code + Z_DATA_ERROR instead of trying to allocate a larger window. + + windowBits can also be zero to request that inflate use the window size in + the zlib header of the compressed stream. + + windowBits can also be -8..-15 for raw inflate. In this case, -windowBits + determines the window size. inflate() will then process raw deflate data, + not looking for a zlib or gzip header, not generating a check value, and not + looking for any check values for comparison at the end of the stream. This + is for use with other formats that use the deflate compressed data format + such as zip. Those formats provide their own check values. If a custom + format is developed using the raw deflate format for compressed data, it is + recommended that a check value such as an adler32 or a crc32 be applied to + the uncompressed data as is done in the zlib, gzip, and zip formats. For + most applications, the zlib format should be used as is. Note that comments + above on the use in deflateInit2() applies to the magnitude of windowBits. + + windowBits can also be greater than 15 for optional gzip decoding. Add + 32 to windowBits to enable zlib and gzip decoding with automatic header + detection, or add 16 to decode only the gzip format (the zlib format will + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a + crc32 instead of an adler32. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit2 does not perform any decompression + apart from possibly reading the zlib header if present: actual decompression + will be done by inflate(). (So next_in and avail_in may be modified, but + next_out and avail_out are unused and unchanged.) The current implementation + of inflateInit2() does not process any header information -- that is + deferred until inflate() is called. +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the adler32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called at any + time to set the dictionary. If the provided dictionary is smaller than the + window and there is already data in the window, then the provided dictionary + will amend what's there. The application must insure that the dictionary + that was used for compression is provided. + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm, + Bytef *dictionary, + uInt *dictLength)); +/* + Returns the sliding dictionary being maintained by inflate. dictLength is + set to the number of bytes in the dictionary, and that many bytes are copied + to dictionary. dictionary must have enough space, where 32768 bytes is + always enough. If inflateGetDictionary() is called with dictionary equal to + Z_NULL, then only the dictionary length is returned, and nothing is copied. + Similary, if dictLength is Z_NULL, then it is not set. + + inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the + stream state is inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a possible full flush point (see above + for the description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync searches for a 00 00 FF FF pattern in the compressed data. + All full flush points have this pattern, but not all occurrences of this + pattern are full flush points. + + inflateSync returns Z_OK if a possible full flush point has been found, + Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point + has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. + In the success case, the application may save the current current value of + total_in which indicates where valid compressed data was found. In the + error case, the application may repeatedly call inflateSync, providing more + input each time, until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when randomly accessing a large stream. The + first pass through the stream can periodically record the inflate state, + allowing restarting inflate at those points when randomly accessing the + stream. + + inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. The + stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm, + int windowBits)); +/* + This function is the same as inflateReset, but it also permits changing + the wrap and window size requests. The windowBits parameter is interpreted + the same as it is for inflateInit2. + + inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL), or if + the windowBits parameter is invalid. +*/ + +ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + If bits is negative, then the input stream bit buffer is emptied. Then + inflatePrime() can be called again to put bits in the buffer. This is used + to clear out bits leftover after feeding inflate a block description prior + to feeding inflate codes. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm)); +/* + This function returns two values, one in the lower 16 bits of the return + value, and the other in the remaining upper bits, obtained by shifting the + return value down 16 bits. If the upper value is -1 and the lower value is + zero, then inflate() is currently decoding information outside of a block. + If the upper value is -1 and the lower value is non-zero, then inflate is in + the middle of a stored block, with the lower value equaling the number of + bytes from the input remaining to copy. If the upper value is not -1, then + it is the number of bits back from the current bit position in the input of + the code (literal or length/distance pair) currently being processed. In + that case the lower value is the number of bytes already emitted for that + code. + + A code is being processed if inflate is waiting for more input to complete + decoding of the code, or if it has completed decoding but is waiting for + more output space to write the literal or match data. + + inflateMark() is used to mark locations in the input data for random + access, which may be at bit positions, and to note those cases where the + output of a code may span boundaries of random access blocks. The current + location in the input stream can be determined from avail_in and data_type + as noted in the description for the Z_BLOCK flush parameter for inflate. + + inflateMark returns the value noted above or -1 << 16 if the provided + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, + gz_headerp head)); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be + used to force inflate() to return immediately after header processing is + complete and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When any + of extra, name, or comment are not Z_NULL and the respective field is not + present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, + unsigned char FAR *window)); + + Initialize the internal stream state for decompression using inflateBack() + calls. The fields zalloc, zfree and opaque in strm must be initialized + before the call. If zalloc and zfree are Z_NULL, then the default library- + derived memory allocation routines are used. windowBits is the base two + logarithm of the window size, in the range 8..15. window is a caller + supplied buffer of that size. Except for special applications where it is + assured that deflate was used with small window sizes, windowBits must be 15 + and a 32K byte window must be supplied to be able to decompress general + deflate streams. + + See inflateBack() for the usage of these routines. + + inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of + the parameters are invalid, Z_MEM_ERROR if the internal state could not be + allocated, or Z_VERSION_ERROR if the version of the library does not match + the version of the header file. +*/ + +typedef unsigned (*in_func) OF((void FAR *, + z_const unsigned char FAR * FAR *)); +typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); + +ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc)); +/* + inflateBack() does a raw inflate with a single call using a call-back + interface for input and output. This is potentially more efficient than + inflate() for file i/o applications, in that it avoids copying between the + output and the sliding window by simply making the window itself the output + buffer. inflate() can be faster on modern CPUs when used with large + buffers. inflateBack() trusts the application to not change the output + buffer passed by the output function, at least until inflateBack() returns. + + inflateBackInit() must be called first to allocate the internal state + and to initialize the state with the user-provided window buffer. + inflateBack() may then be used multiple times to inflate a complete, raw + deflate stream with each call. inflateBackEnd() is then called to free the + allocated state. + + A raw deflate stream is one with no zlib or gzip header or trailer. + This routine would normally be used in a utility that reads zip or gzip + files and writes out uncompressed files. The utility would decode the + header and process the trailer on its own, hence this routine expects only + the raw deflate stream to decompress. This is different from the normal + behavior of inflate(), which expects either a zlib or gzip header and + trailer around the deflate stream. + + inflateBack() uses two subroutines supplied by the caller that are then + called by inflateBack() for input and output. inflateBack() calls those + routines until it reads a complete deflate stream and writes out all of the + uncompressed data, or until it encounters an error. The function's + parameters and return types are defined above in the in_func and out_func + typedefs. inflateBack() will call in(in_desc, &buf) which should return the + number of bytes of provided input, and a pointer to that input in buf. If + there is no input available, in() must return zero--buf is ignored in that + case--and inflateBack() will return a buffer error. inflateBack() will call + out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() + should return zero on success, or non-zero on failure. If out() returns + non-zero, inflateBack() will return with an error. Neither in() nor out() + are permitted to change the contents of the window provided to + inflateBackInit(), which is also the buffer that out() uses to write from. + The length written by out() will be at most the window size. Any non-zero + amount of input may be provided by in(). + + For convenience, inflateBack() can be provided input on the first call by + setting strm->next_in and strm->avail_in. If that input is exhausted, then + in() will be called. Therefore strm->next_in must be initialized before + calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called + immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in + must also be initialized, and then if strm->avail_in is not zero, input will + initially be taken from strm->next_in[0 .. strm->avail_in - 1]. + + The in_desc and out_desc parameters of inflateBack() is passed as the + first parameter of in() and out() respectively when they are called. These + descriptors can be optionally used to pass any information that the caller- + supplied in() and out() functions need to do their job. + + On return, inflateBack() will set strm->next_in and strm->avail_in to + pass back any unused input that was provided by the last in() call. The + return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR + if in() or out() returned an error, Z_DATA_ERROR if there was a format error + in the deflate stream (in which case strm->msg is set to indicate the nature + of the error), or Z_STREAM_ERROR if the stream was not properly initialized. + In the case of Z_BUF_ERROR, an input or output error can be distinguished + using strm->next_in which will be Z_NULL only if in() returned an error. If + strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning + non-zero. (in() will always be called before out(), so strm->next_in is + assured to be defined if out() returns non-zero.) Note that inflateBack() + cannot return Z_OK. +*/ + +ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); +/* + All memory allocated by inflateBackInit() is freed. + + inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream + state was inconsistent. +*/ + +ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); +/* Return flags indicating compile-time options. + + Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: + 1.0: size of uInt + 3.2: size of uLong + 5.4: size of voidpf (pointer) + 7.6: size of z_off_t + + Compiler, assembler, and debug options: + 8: DEBUG + 9: ASMV or ASMINF -- use ASM code + 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention + 11: 0 (reserved) + + One-time table building (smaller code, but not thread-safe if true): + 12: BUILDFIXED -- build static block decoding tables when needed + 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed + 14,15: 0 (reserved) + + Library content (indicates missing functionality): + 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking + deflate code when not needed) + 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect + and decode gzip streams (to avoid linking crc code) + 18-19: 0 (reserved) + + Operation variations (changes in library functionality): + 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate + 21: FASTEST -- deflate algorithm with only one, lowest compression level + 22,23: 0 (reserved) + + The sprintf variant used by gzprintf (zero is best): + 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format + 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! + 26: 0 = returns value, 1 = void -- 1 means inferred string length returned + + Remainder: + 27-31: 0 (reserved) + */ + +#ifndef Z_SOLO + + /* utility functions */ + +/* + The following utility functions are implemented on top of the basic + stream-oriented functions. To simplify the interface, some default options + are assumed (compression level and memory usage, standard memory allocation + functions). The source code of these utility functions can be modified if + you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); +/* + compressBound() returns an upper bound on the compressed size after + compress() or compress2() on sourceLen bytes. It would be used before a + compress() or compress2() call to allocate the destination buffer. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be large enough to hold the entire + uncompressed data. (The size of the uncompressed data must have been saved + previously by the compressor and transmitted to the decompressor by some + mechanism outside the scope of this compression library.) Upon exit, destLen + is the actual size of the uncompressed buffer. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In + the case where there is not enough room, uncompress() will fill the output + buffer with the uncompressed data up to that point. +*/ + + /* gzip file access functions */ + +/* + This library supports reading and writing files in gzip (.gz) format with + an interface similar to that of stdio, using the functions that start with + "gz". The gzip format is different from the zlib format. gzip is a gzip + wrapper, documented in RFC 1952, wrapped around a deflate stream. +*/ + +typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ + +/* +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); + + Opens a gzip (.gz) file for reading or writing. The mode parameter is as + in fopen ("rb" or "wb") but can also include a compression level ("wb9") or + a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only + compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' + for fixed code compression as in "wb9F". (See the description of + deflateInit2 for more information about the strategy parameter.) 'T' will + request transparent writing or appending with no compression and not using + the gzip format. + + "a" can be used instead of "w" to request that the gzip stream that will + be written be appended to the file. "+" will result in an error, since + reading and writing to the same gzip file is not supported. The addition of + "x" when writing will create the file exclusively, which fails if the file + already exists. On systems that support it, the addition of "e" when + reading or writing will set the flag to close the file on an execve() call. + + These functions, as well as gzip, will read and decode a sequence of gzip + streams in a file. The append function of gzopen() can be used to create + such a file. (Also see gzflush() for another way to do this.) When + appending, gzopen does not test whether the file begins with a gzip stream, + nor does it look for the end of the gzip streams to begin appending. gzopen + will simply append a gzip stream to the existing file. + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. When + reading, this will be detected automatically by looking for the magic two- + byte gzip header. + + gzopen returns NULL if the file could not be opened, if there was + insufficient memory to allocate the gzFile state, or if an invalid mode was + specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). + errno can be checked to determine if the reason gzopen failed was that the + file could not be opened. +*/ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen associates a gzFile with the file descriptor fd. File descriptors + are obtained from calls like open, dup, creat, pipe or fileno (if the file + has been previously opened with fopen). The mode parameter is as in gzopen. + + The next call of gzclose on the returned gzFile will also close the file + descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor + fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, + mode);. The duplicated descriptor should be saved to avoid a leak, since + gzdopen does not close fd if it fails. If you are using fileno() to get the + file descriptor from a FILE *, then you will have to use dup() to avoid + double-close()ing the file descriptor. Both gzclose() and fclose() will + close the associated file descriptor, so they need to have different file + descriptors. + + gzdopen returns NULL if there was insufficient memory to allocate the + gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not + provided, or '+' was provided), or if fd is -1. The file descriptor is not + used until the next gz* read, write, seek, or close operation, so gzdopen + will not detect if fd is invalid (unless fd is -1). +*/ + +ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); +/* + Set the internal buffer size used by this library's functions. The + default buffer size is 8192 bytes. This function must be called after + gzopen() or gzdopen(), and before any other calls that read or write the + file. The buffer memory allocation is always deferred to the first read or + write. Two buffers are allocated, either both of the specified size when + writing, or one of the specified size and the other twice that size when + reading. A larger buffer size of, for example, 64K or 128K bytes will + noticeably increase the speed of decompression (reading). + + The new buffer size also affects the maximum length for gzprintf(). + + gzbuffer() returns 0 on success, or -1 on failure, such as being called + too late. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. If + the input file is not in gzip format, gzread copies the given number of + bytes into the buffer directly from the file. + + After reaching the end of a gzip stream in the input, gzread will continue + to read, looking for another gzip stream. Any number of gzip streams may be + concatenated in the input file, and will all be decompressed by gzread(). + If something other than a gzip stream is encountered after a gzip stream, + that remaining trailing garbage is ignored (and no error is returned). + + gzread can be used to read a gzip file that is being concurrently written. + Upon reaching the end of the input, gzread will return with the available + data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then + gzclearerr can be used to clear the end of file indicator in order to permit + gzread to be tried again. Z_OK indicates that a gzip stream was completed + on the last gzread. Z_BUF_ERROR indicates that the input file ended in the + middle of a gzip stream. Note that gzread does not return -1 in the event + of an incomplete gzip stream. This error is deferred until gzclose(), which + will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip + stream. Alternatively, gzerror can be used before gzclose to detect this + case. + + gzread returns the number of uncompressed bytes actually read, less than + len for end of file, or -1 for error. +*/ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + voidpc buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes written or 0 in case of + error. +*/ + +ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the arguments to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written, or 0 in case of error. The number of + uncompressed bytes written is limited to 8191, or one less than the buffer + size given to gzbuffer(). The caller should assure that this limit is not + exceeded. If it is exceeded, then gzprintf() will return an error (0) with + nothing written. In this case, there may also be a buffer overflow with + unpredictable consequences, which is possible only if zlib was compiled with + the insecure functions sprintf() or vsprintf() because the secure snprintf() + or vsnprintf() functions were not available. This can be determined using + zlibCompileFlags(). +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or a + newline character is read and transferred to buf, or an end-of-file + condition is encountered. If any characters are read or if len == 1, the + string is terminated with a null character. If no characters are read due + to an end-of-file or len < 1, then the buffer is left untouched. + + gzgets returns buf which is a null-terminated string, or it returns NULL + for end-of-file or in case of error. If there was an error, the contents at + buf are indeterminate. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. gzputc + returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte or -1 + in case of end of file or error. This is implemented as a macro for speed. + As such, it does not do all of the checking the other functions do. I.e. + it does not check to see if file is NULL, nor whether the structure file + points to has been clobbered or not. +*/ + +ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); +/* + Push one character back onto the stream to be read as the first character + on the next read. At least one character of push-back is allowed. + gzungetc() returns the character pushed, or -1 on failure. gzungetc() will + fail if c is -1, and may fail if a character has been pushed but not read + yet. If gzungetc is used immediately after gzopen or gzdopen, at least the + output buffer size of pushed characters is allowed. (See gzbuffer above.) + The pushed character will be discarded if the stream is repositioned with + gzseek() or gzrewind(). +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter flush + is as in the deflate() function. The return value is the zlib error number + (see function gzerror below). gzflush is only permitted when writing. + + If the flush parameter is Z_FINISH, the remaining data is written and the + gzip stream is completed in the output. If gzwrite() is called again, a new + gzip stream will be started in the output. gzread() is able to read such + concatented gzip streams. + + gzflush should be called only when strictly necessary because it will + degrade compression if called too often. +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); + + Sets the starting position for the next gzread or gzwrite on the given + compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); + + Returns the starting position for the next gzread or gzwrite on the given + compressed file. This position represents a number of bytes in the + uncompressed data stream, and is zero when starting, even if appending or + reading a gzip stream from the middle of a file using gzdopen(). + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); + + Returns the current offset in the file being read or written. This offset + includes the count of bytes that precede the gzip stream, for example when + appending or when using gzdopen() for reading. When reading, the offset + does not include as yet unused buffered input. This information can be used + for a progress indicator. On error, gzoffset() returns -1. +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns true (1) if the end-of-file indicator has been set while reading, + false (0) otherwise. Note that the end-of-file indicator is set only if the + read tried to go past the end of the input, but came up short. Therefore, + just like feof(), gzeof() may return false even if there is no more data to + read, in the event that the last read request was for the exact number of + bytes remaining in the input file. This will happen if the input file size + is an exact multiple of the buffer size. + + If gzeof() returns true, then the read functions will return no more data, + unless the end-of-file indicator is reset by gzclearerr() and the input file + has grown since the previous end of file was detected. +*/ + +ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); +/* + Returns true (1) if file is being copied directly while reading, or false + (0) if file is a gzip stream being decompressed. + + If the input file is empty, gzdirect() will return true, since the input + does not contain a gzip stream. + + If gzdirect() is used immediately after gzopen() or gzdopen() it will + cause buffers to be allocated to allow reading the file to determine if it + is a gzip file. Therefore if gzbuffer() is used, it should be called before + gzdirect(). + + When writing, gzdirect() returns true (1) if transparent writing was + requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: + gzdirect() is not needed when writing. Transparent writing must be + explicitly requested, so the application already knows the answer. When + linking statically, using gzdirect() will include all of the zlib code for + gzip file reading and decompression, which may not be desired.) +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file and + deallocates the (de)compression state. Note that once file is closed, you + cannot call gzerror with file, since its structures have been deallocated. + gzclose must not be called more than once on the same file, just as free + must not be called more than once on the same allocation. + + gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a + file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the + last read ended in the middle of a gzip stream, or Z_OK on success. +*/ + +ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); +ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); +/* + Same as gzclose(), but gzclose_r() is only for use when reading, and + gzclose_w() is only for use when writing or appending. The advantage to + using these instead of gzclose() is that they avoid linking in zlib + compression or decompression code that is not used when only reading or only + writing respectively. If gzclose() is used, then both compression and + decompression code will be included the application when linking to a static + zlib library. +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the given + compressed file. errnum is set to zlib error number. If an error occurred + in the file system and not in the compression library, errnum is set to + Z_ERRNO and the application may consult errno to get the exact error code. + + The application must not modify the returned string. Future calls to + this function may invalidate the previously returned string. If file is + closed, then the string previously returned by gzerror will no longer be + available. + + gzerror() should be used to distinguish errors from end-of-file for those + functions above that do not distinguish those cases in their return values. +*/ + +ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); +/* + Clears the error and end-of-file flags for file. This is analogous to the + clearerr() function in stdio. This is useful for continuing to read a gzip + file that is being written concurrently. +*/ + +#endif /* !Z_SOLO */ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the compression + library. +*/ + +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is Z_NULL, this function returns the + required initial value for the checksum. + + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. + + Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +/* +ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, + z_off_t len2)); + + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note + that the z_off_t type (like off_t) is a signed integer. If len2 is + negative, the result has no meaning or utility. +*/ + +ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +/* + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. If buf is Z_NULL, this function returns the required + initial value for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. + + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +/* +ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); + + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, + unsigned char FAR *window, + const char *version, + int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ + (int)sizeof(z_stream)) +#define inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, (int)sizeof(z_stream)) + +#ifndef Z_SOLO + +/* gzgetc() macro and its supporting function and exposed data structure. Note + * that the real internal state is much larger than the exposed structure. + * This abbreviated structure exposes just enough for the gzgetc() macro. The + * user should not mess with these exposed elements, since their names or + * behavior could change in the future, perhaps even capriciously. They can + * only be used by the gzgetc() macro. You have been warned. + */ +struct gzFile_s { + unsigned have; + unsigned char *next; + z_off64_t pos; +}; +ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +# define z_gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) +#else +# define gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) +#endif + +/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or + * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if + * both are true, the application gets the *64 functions, and the regular + * functions are changed to 64 bits) -- in case these are set on systems + * without large file support, _LFS64_LARGEFILE must also be true + */ +#ifdef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); + ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); +#endif + +#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) +# ifdef Z_PREFIX_SET +# define z_gzopen z_gzopen64 +# define z_gzseek z_gzseek64 +# define z_gztell z_gztell64 +# define z_gzoffset z_gzoffset64 +# define z_adler32_combine z_adler32_combine64 +# define z_crc32_combine z_crc32_combine64 +# else +# define gzopen gzopen64 +# define gzseek gzseek64 +# define gztell gztell64 +# define gzoffset gzoffset64 +# define adler32_combine adler32_combine64 +# define crc32_combine crc32_combine64 +# endif +# ifndef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); +# endif +#else + ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); +#endif + +#else /* Z_SOLO */ + + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); + +#endif /* !Z_SOLO */ + +/* hack for buggy compilers */ +#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; +#endif + +/* undocumented functions */ +ZEXTERN const char * ZEXPORT zError OF((int)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); +ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void)); +ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); +ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); +ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); +#if defined(_WIN32) && !defined(Z_SOLO) +ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path, + const char *mode)); +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file, + const char *format, + va_list va)); +# endif +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* ZLIB_H */ diff --git a/src/SDL2/VisualC/external/lib/x64/LICENSE.jpeg.txt b/src/SDL2/VisualC/external/lib/x64/LICENSE.jpeg.txt new file mode 100644 index 000000000..78c93171f --- /dev/null +++ b/src/SDL2/VisualC/external/lib/x64/LICENSE.jpeg.txt @@ -0,0 +1,65 @@ +The source code to this library used with SDL_image can be found here: +http://www.libsdl.org/projects/SDL_image/libs/ +--- + +LEGAL ISSUES +============ + +In plain English: + +1. We don't promise that this software works. (But if you find any bugs, + please let us know!) +2. You can use this software for whatever you want. You don't have to pay us. +3. You may not pretend that you wrote this software. If you use it in a + program, you must acknowledge somewhere in your documentation that + you've used the IJG code. + +In legalese: + +The authors make NO WARRANTY or representation, either express or implied, +with respect to this software, its quality, accuracy, merchantability, or +fitness for a particular purpose. This software is provided "AS IS", and you, +its user, assume the entire risk as to its quality and accuracy. + +This software is copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding. +All Rights Reserved except as specified below. + +Permission is hereby granted to use, copy, modify, and distribute this +software (or portions thereof) for any purpose, without fee, subject to these +conditions: +(1) If any part of the source code for this software is distributed, then this +README file must be included, with this copyright and no-warranty notice +unaltered; and any additions, deletions, or changes to the original files +must be clearly indicated in accompanying documentation. +(2) If only executable code is distributed, then the accompanying +documentation must state that "this software is based in part on the work of +the Independent JPEG Group". +(3) Permission for use of this software is granted only if the user accepts +full responsibility for any undesirable consequences; the authors accept +NO LIABILITY for damages of any kind. + +These conditions apply to any software derived from or based on the IJG code, +not just to the unmodified library. If you use our work, you ought to +acknowledge us. + +Permission is NOT granted for the use of any IJG author's name or company name +in advertising or publicity relating to this software or products derived from +it. This software may be referred to only as "the Independent JPEG Group's +software". + +We specifically permit and encourage the use of this software as the basis of +commercial products, provided that all warranty or liability claims are +assumed by the product vendor. + + +The IJG distribution formerly included code to read and write GIF files. +To avoid entanglement with the Unisys LZW patent, GIF reading support has +been removed altogether, and the GIF writer has been simplified to produce +"uncompressed GIFs". This technique does not use the LZW algorithm; the +resulting GIF files are larger than usual, but are readable by all standard +GIF decoders. + +We are required to state that + "The Graphics Interchange Format(c) is the Copyright property of + CompuServe Incorporated. GIF(sm) is a Service Mark property of + CompuServe Incorporated." diff --git a/src/SDL2/VisualC/external/lib/x64/LICENSE.png.txt b/src/SDL2/VisualC/external/lib/x64/LICENSE.png.txt new file mode 100644 index 000000000..5472ab253 --- /dev/null +++ b/src/SDL2/VisualC/external/lib/x64/LICENSE.png.txt @@ -0,0 +1,114 @@ +The source code to this library used with SDL_image can be found here: +http://www.libsdl.org/projects/SDL_image/libs/ +--- + +This copy of the libpng notices is provided for your convenience. In case of +any discrepancy between this copy and the notices in the file png.h that is +included in the libpng distribution, the latter shall prevail. + +COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: + +If you modify libpng you may insert additional notices immediately following +this sentence. + +This code is released under the libpng license. + +libpng versions 1.2.6, August 15, 2004, through 1.5.7, December 15, 2011, are +Copyright (c) 2004, 2006-2011 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-1.2.5 +with the following individual added to the list of Contributing Authors + + Cosmin Truta + +libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are +Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-1.0.6 +with the following individuals added to the list of Contributing Authors + + Simon-Pierre Cadieux + Eric S. Raymond + Gilles Vollant + +and with the following additions to the disclaimer: + + There is no warranty against interference with your enjoyment of the + library or against infringement. There is no warranty that our + efforts or the library will fulfill any of your particular purposes + or needs. This library is provided with all faults, and the entire + risk of satisfactory quality, performance, accuracy, and effort is with + the user. + +libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are +Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-0.96, +with the following individuals added to the list of Contributing Authors: + + Tom Lane + Glenn Randers-Pehrson + Willem van Schaik + +libpng versions 0.89, June 1996, through 0.96, May 1997, are +Copyright (c) 1996, 1997 Andreas Dilger +Distributed according to the same disclaimer and license as libpng-0.88, +with the following individuals added to the list of Contributing Authors: + + John Bowler + Kevin Bracey + Sam Bushell + Magnus Holmgren + Greg Roelofs + Tom Tanner + +libpng versions 0.5, May 1995, through 0.88, January 1996, are +Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. + +For the purposes of this copyright and license, "Contributing Authors" +is defined as the following set of individuals: + + Andreas Dilger + Dave Martindale + Guy Eric Schalnat + Paul Schmidt + Tim Wegner + +The PNG Reference Library is supplied "AS IS". The Contributing Authors +and Group 42, Inc. disclaim all warranties, expressed or implied, +including, without limitation, the warranties of merchantability and of +fitness for any purpose. The Contributing Authors and Group 42, Inc. +assume no liability for direct, indirect, incidental, special, exemplary, +or consequential damages, which may result from the use of the PNG +Reference Library, even if advised of the possibility of such damage. + +Permission is hereby granted to use, copy, modify, and distribute this +source code, or portions hereof, for any purpose, without fee, subject +to the following restrictions: + +1. The origin of this source code must not be misrepresented. + +2. Altered versions must be plainly marked as such and must not + be misrepresented as being the original source. + +3. This Copyright notice may not be removed or altered from any + source or altered source distribution. + +The Contributing Authors and Group 42, Inc. specifically permit, without +fee, and encourage the use of this source code as a component to +supporting the PNG file format in commercial products. If you use this +source code in a product, acknowledgment is not required but would be +appreciated. + + +A "png_get_copyright" function is available, for convenient use in "about" +boxes and the like: + + printf("%s",png_get_copyright(NULL)); + +Also, the PNG logo (in PNG format, of course) is supplied in the +files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). + +Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a +certification mark of the Open Source Initiative. + +Glenn Randers-Pehrson +glennrp at users.sourceforge.net +December 15, 2011 diff --git a/src/SDL2/VisualC/external/lib/x64/LICENSE.tiff.txt b/src/SDL2/VisualC/external/lib/x64/LICENSE.tiff.txt new file mode 100644 index 000000000..85b375aff --- /dev/null +++ b/src/SDL2/VisualC/external/lib/x64/LICENSE.tiff.txt @@ -0,0 +1,25 @@ +The source code to this library used with SDL_image can be found here: +http://www.libsdl.org/projects/SDL_image/libs/ +--- + +Copyright (c) 1988-1997 Sam Leffler +Copyright (c) 1991-1997 Silicon Graphics, Inc. + +Permission to use, copy, modify, distribute, and sell this software and +its documentation for any purpose is hereby granted without fee, provided +that (i) the above copyright notices and this permission notice appear in +all copies of the software and related documentation, and (ii) the names of +Sam Leffler and Silicon Graphics may not be used in any advertising or +publicity relating to the software without the specific, prior written +permission of Sam Leffler and Silicon Graphics. + +THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + +IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +OF THIS SOFTWARE. diff --git a/src/SDL2/VisualC/external/lib/x64/LICENSE.webp.txt b/src/SDL2/VisualC/external/lib/x64/LICENSE.webp.txt new file mode 100644 index 000000000..da8a6bd83 --- /dev/null +++ b/src/SDL2/VisualC/external/lib/x64/LICENSE.webp.txt @@ -0,0 +1,34 @@ +The source code to this library used with SDL_image can be found here: +http://www.libsdl.org/projects/SDL_image/libs/ +--- + +Copyright (c) 2010, Google Inc. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + * Neither the name of Google nor the names of its contributors may + be used to endorse or promote products derived from this software + without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + diff --git a/src/SDL2/VisualC/external/lib/x64/LICENSE.zlib.txt b/src/SDL2/VisualC/external/lib/x64/LICENSE.zlib.txt new file mode 100644 index 000000000..a849723e9 --- /dev/null +++ b/src/SDL2/VisualC/external/lib/x64/LICENSE.zlib.txt @@ -0,0 +1,31 @@ +The source code to this library used with SDL_image can be found here: +http://www.libsdl.org/projects/SDL_image/libs/ +--- + +Copyright notice: + + (C) 1995-2010 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + +If you use the zlib library in a product, we would appreciate *not* receiving +lengthy legal documents to sign. The sources are provided for free but without +warranty of any kind. The library has been entirely written by Jean-loup +Gailly and Mark Adler; it does not include third-party code. diff --git a/src/SDL2/VisualC/external/lib/x64/libjpeg-9.dll b/src/SDL2/VisualC/external/lib/x64/libjpeg-9.dll new file mode 100755 index 0000000000000000000000000000000000000000..b8c637fe10c68b724025ae04042d591419c639dd GIT binary patch literal 243200 zcmdSCeSB2K^*_FwEF?nkMhzNktV`W~8kE{>i4f0 z_xtOY7woUipu zEhE-ALt92P&bi?>_qDQ$wbxxV zY}gQw1-c>Na9q1|sNXY-;_%B)@ z^4`?WTs&^Z8e=TyTZ1^kF5EI|2 z>O~0jQa~??NZzEH=7>Ct^E8~+WIXC+#HkrX?Od~46ckMUV)vBPdq^^B{p`LR4x{&BZ<)X5{G=5;D_ zeX|BR(SU7NqC;#!si=9ZcfY9l<%7kJsM|arm7_no$_=V~EV4+kQY5LqbaeOg)Ic=l zK0uR5fs$j0~&Sjde7ML;5?}t=gcU zfoMf*fzx~!r1N6P;{ck>5!q~ZwjBER|62gV~GE$}U z6o(^6O>W>>LaunPs&CQz>h<;dS(Ad8dVMTsqd>1rZukZ3A-88OyrpTf9Xvd1B z*rR|K-zmlZfTw;ST>|W7Ik|G`=r)c%QshX~W-)s6YfxT)lgeLwJe$QJ#(#rC-b0ym z4&T}_rxag{SmV~mczq)OXBfhGQtyc_M~3J!Z!aJboVO643+yTk^nISqQv2ewXgDvj z$1~T0Cz06>=sm{6$R1B}=`1M+%W*5j{Zp1H;44JnwCpB$SRdN)BaIELLlw09)<@Z z^oAPzX3N#K>=-mLa-PbHRecBYQ4sk^I3Z47fPBT-@<4xb@O{UD^LtU;<)W1cB2*OsiwChk;QDg{snwBn_txr6mz3Yq= z_mp5d4h`u9ct=mI+hJ7vfjHuzC15%qOXY+9RD}tguI0J}o?PPN$)yUO^Qey>OQ+TP z(^@B9ucdaUYZp*-TDv%cG|N40T zb!+~W6Ayxbu-%GHYcBycr4*@aTk(n{{9Y<@RRf{)m#+2jmJvU?rdv%ca`qHE{`q~5 z<=C$=%HB+hK(r5Bglcm>VrSD|j^53kcR3t|;Y9<(-Xti? zIj=eIMUmtFqd1V)H}wd8K+o8P5(N{m4)Aa!0nIG?t9MBnTa4K;&ohngkTz$Mc`F z>g1UV8xYZuLi!6&sYFfH{LPJDAv?^AKzvLd?Q2s}-)*b;oU0}dpDoWk!uf|KtH%HX zA-!8+Jg2I^tms<;5VQ>m^#Scj(R}cPrBs!y8>)UV+fZ$V;+vwSq8Yb;OJze9aG+6uQO#i#=U`wQ6fmJt0EE`rh*6oJxKYgvHM>hX&yV`s zILes61~IdFeQr^a)_?7n4>|FmY=b+8;BthGKVmZHtH~#$LN_XOQ-z(KorUzJzy4pU z@W&2CCkhhC1Ijk=dKS&$^$^ujGs;_^apTpQ)(AuNcXm=s&em%^V#vEWRT&$=?K6Le zd={!$jp(7Ozo9@X_Fwm9{baSHeH`d*H;35N@_LZ-S&T=ZURj?|iVS#^$yv+`YZg>G zqE{pOLY^&@0QN&{rGbW}@k)(T^`j{5>yheuWIZKkuPCJtQ0sjk&i@YjN|RM|1Wobw#*&dz=aU3l|5)ED&|W~_LSj`{ zQa{QwNvi{Ykq=YZTJ2+6 z4RWUIsQGwcmFL96EkYjgs2q>^~}LDo|WSF0Jy>)5Z%}*#p4JE!z~qBR+5&T;N2K^ zLS+-1xGp{goqPoBCcVy&d{X>#WDw$i5K_1-idW)I-xksj{8#y377!wAwgLfWYXEXO zPy?6_JP9@$r6mC!Y%y{>8dS*}v>XX)f*Q1JJH3+T|9iZMHUW8P)3XSRHoYv~ppv|Y zx36x~m*^zg24_%PUmDalxO{v>r4`RYqM8%Aux$lMqAyUKzF-ul(swD$+Xh{!pn>sg zFmRX(rF{7%uc21*nLv%^-B>50(o#&JtXkUH11Y^OE4mT$A=09kFA@FUL~2f77J8N~ z|A!z+VSl6{2Qm63dJJD!Mo4{+h>^&|d=o+$csOF!Ai3!JQU=jMnCi5O73VETj2@th? zA?64s8i2EMxxG|n4W*&Pge)|XknS&y4CX?hn@|5ri1-7d;g)=-#h)c42I@mXUa0JT zn&ptgY-%N|tx70G+1cJ?qTSI7uGA%6mSU5u`*yL(qyCC^_CrsVV)x-KzG*?V!lrrx z@m?wZIwG_bn)k6$2fVi}8g&9OQfxA?50#lsbvvhe(zR|xI{xbD&z3~IC>rmLj!pHS zfl|`yjm9t(L|(lsb@YtZqgg5TxyW1svL?%%nDpIweGc@1`d$Y?YBzeE(E}))c^ne_ zdac&uR9LN>rqB1;WKVokb9fV7SPNJ5{D@3?A51MDG3+et0@O8Iau}9R!5;%q*K{5+Q@{A>_4Ny zh|$`Ew@om0q5u#8jlaTXV2pM~PU{rt{xdCxIlTaz*7zezBI9mLewe`= zJ^UmG1eKacFczSP@znn2g?WBLvkpp!txrhpHvj-fUF6IhJ)T(z3QaNwA;P>AIkj51 z(|nD?ZbkPT&e}>vpHXGrz@z+_vLGkp^<&7s0#Th9v*r>j6Ahc}J%V8~6`mdXutgu1 zScg#8-!S@7TGihacwh)5RuC!?Wh_C6X(Y_!$!0aEZx8ARy}jO~Ek-+q6pca^&PmW1 ztqj>SB)j6-=oGCBLL>Wh+5l_zFQD24pjGxfK7Qfsi zDjSlktXDJumF>oxqVM39b<>(ZI!!**T@?MHtnGG2E9JCo33r)*In14WL>#E>3rR_y z6r*g!uehOr8o1jTS(AA=Z%H8dk%uz>7BR9d^iDzBbNB*$5~s7}oG{%5=y`q-@b07v zP`C)n$TcU-6p}@yvXnm$gw7|kdpnUk$d;1T0Me#o3l*je zDs+E8p(?0vP}_Q%IM9e^3{U`iSE2v=RrZvq1hyhoWutq7;n>oQaWReh$XMh(xX2qnsPP@r1x4i?|gbm28MQoIRG55RV#e-P3S8l6Y8+4MwSx6C@o zkP+V`EV5KIm#pmrsgW+NhRbJb_sco@P4)U5v~jB9~j4vU@C`UGpQgo z7J4jdm0lQEhlzM$ePZ!&mzucJiLz8s+fWP;LD)%*9uy0PCw?xnM&6`c@)~pqW~qb5 zBS?j&+~FroVYxd-05CeKGHpYV_K`C>J&%@!h#m_hO3P_BS(x!{mX;qvc|IH(#>5Hb zR`xBWQI%Fq1KsfIFyH6cW^}I9i&j_&KM#=g{%uC&mx#!>uaw#Wz)kYAJJ4kPIAmLF zFsYQj?Q5Q+PDu5;IO0;ri$cW@5wha@rI?HnkYB)$BR?NP`n!3+tNNkMIkV7#o!gE_ z-{akWmoRcK669^!U}CQ4R4FDE%n#&|*A z-CT_%ePT^vXG5@eHW=SVYJ6u1#Lyshe4p^28^2IuNs%!O={yy5h#BLcHO_ll1`P2j zgm{CGQY-cx7AUF~RVaEFaI}2zE@bL^ciU0f_v(`GTBID`A565MS0f?JXLkZb{4Fd- z?e07XK){7z4nZ=-GMm;eEeX~d!vo%pMBiDO1 z+^ZJf-9y7+D1d9e4VWR+Wm6uRYCXlYdNuZZN(}Bw2N<68Ld7(6v&SlV z_)V0P`}zs#J&K;(W=QeBpjHB66XFr$Pbg1Q*P5as{fO~PM9uC*pH`@t|JINwzRgQU z@ctDL`VkO%u=sA?8Dj>D*{n_-!0LGa^{v~C=mk_c>JarC)pq5a){YpJ2xpdx{s$9v z5Z=2ex2ks;$3MX|nlq3eh4hc9z3)=e8c?Bkzc~jF8Qp0#_I*Zgi#;IlWt_mLJ3-ts z?46C~QV_6y+#HL{Iej9(Kc=v|sDR4;N|dYWpxoE74vY+A0nlw^HVN)PgThvHQm(cQ zG|me93y~|9OU+*IPGKJ%tmyB6Uy>15>nT;F7r;pRRdgP`GQN#Q`+i3dT3)lUM*1}N zS%tlaUD;??JJZZi)DeQjHYOaPr|K+X5mNT}Ka>~bQ>JX4J zhWaoOvY78xSoRo|{gCfkb78E}bPMPk#Eesd;Us2U8)MYV46Qf$d^=Z2eN2)wFxfzW z(?NiHta-MZX?%Xn%gVmbq>h8u1W`x>7^CQOp}r*UvL}fu6af%oP)`&7l!WJYtocD1 z_2KvGi~m9s1~Sa}^dJ!|ZH-(T%VCNj{>42?c z7;@_KqWa=h)K=2wV)s(c=edGm^WTuIxDe3G05sq{1PD`Zu!3@eiqK&@U+GP>~b*1z7_)`q=bFqvB)CiOU*=c{OpllXg#OUQBN^ zzkz9;uW9o~*rG)>GIuV>{O%-s!b$UI3|o8h^ts#9j&7391NNMoLgceVV$@AjsIGxM zNpl!h;*K$RdiQ6(W7+fa4Vi$3r0e{EOBHvsS(e=6rsHyBHiX95(e@9jdga5CB2 zw@XiLJ0knGEVeKHuy-I5R*=_&P5XRR-wgY5Vpzlb=#H+D_@P~>Qbc__Ls4pZ zjvrukSl)z&U>7=8P7{;&mH8<0nA7mMw}b*0RNs>G5pj{G5rG+@ow0@734PMx)JdRIPcQBO(pRNyr=2 z2ZAQ^w{2mu=uzaKgbYPAg9|c<@et`}BYgtZ`Nee0gQA+6g#D=3PpUcdr?0dREMRSf zf0f-&-G}E5%uZ;`Vo!tj5T^cTgkRX>uv2M<*p;OUQ_Iw_-xZKnrJ$a5&x0+%jfx%E z`SYu~>u{ouv~`pT71lI{Ef^cBrg0Re$2I7%BlGW**DG!NenstNPtf3m*bQ^A!Ak}l z5&-P-nX10r(@Gh@bmy@rXky^auYKr@_u^%N)G-fHs=nAmHk-M~iNGr)CFX^~i#>Cp z^aWUb8TQ&Ruyy5=SmOykpwt)|;cSDSO)2+P{xDgCAL$XDaNiZtcj_@SWQBXy(zRyP9PELL=j31UMq zyk1RR>uD&VP?L=PJhD0U9AQktEP_0>`HE{ zQS0?1(yBf%J2yl>c5vh@wB+}izZWV7QIi)_led@D^X^^b@B`Sg^sniyhzU9Sf&bb1 zX{u(ns=ie8Q*w0h{ikI)Wt+#)Xr^*(L=+7BTv&28%pw9%i2&yMCeD;rJjA)L7$B8d zqtmvYMzL`0&D$~NigOR4?eHh^*l3xorb(;EaJ{}Iq+{maTuL2mKnEFiM@-}Gw~J^VMJ}m#?uFnd{WZQ5 z{hij@TrnvT`ZmbHn5~y{H2XG2Kb2u43OV;sZeM@&RgP=OB3dW-7L>L8mMnhI1Dd#> zncz<+=_?B?PQum_HL^CE*04Pi(QX71ltfFGEuw9Ov5SZ+T#G)0q{OWt8MdfGP2A=t zTAt(UM|`7n$56xv*iyj`;9S}ZXdz^1!l=&zI8qR(kxeRloH!NCl|+4Nc$y2*Te1BQ zVnKSN4^>G^zfRTMJcc6JlyTCkIz<5k2`SR5o2%oSkXMyDrt&JD@+1M>3kmsQK;IK$ z5A$&5?Ae`(iB6^XcDS6RoxZwpvi_RXK`x=n*hS^@B|ruh`RYPa2bqI{VW3NN9L}FG zcXVSpUFQlhR~K@ExqM6%te`_~RL;rQpWVu)jPY%e6OF?hOMV%kK^kddKw;6uKg{M83bh`})Oq$58khRLUMM^l(5MEHxH`?+jp~4un3Hdi;kLq7eHM|jH%!9tIFhDz_ z|KY4EC%;1Bx-n=swd1$wl?-p735kl40sRB@SD-iK3d6efuTmMT z6lm{u%f8;(dMRvHuV6aV>w9JWRZNpvoLe@PqU*C@h@?T4R{Rh-Flsi#odY9~V7M|$ zG&*Uh_}FQmL0>^s$Z2s|LN$19^AA7@jcAp_>_d*(oxJ}h**7T%I4^114MD zLRh;j2Fz|&&9?|n&VOxycSa28mNpVzVqa)rEXxFfWDHJoiG+Nzsl5H<4%_i4$EFG`(> z>Y=CqWWUD!Kh?vB042JKUDe?LCw&m!HYDw4$2Ya)@6T)xDdL zp%rsyled@njb7f?#X?~G?G7kFir(sgnyMfKr+~Ip9ae0L-bn`{6#Z9pMnG;$e&<|d z|CIxppZ+)m<+g6Bqb>8D8}a+$Hk4~S>OeJ7*!#(;I=_E4 zfIqP|>V?97f=L(hU5tIN>2PtnyC6aMHZK> z2_>qYqu11t^4j*$Fb7*+LpUj3UP+G$)|01}ol1%5Bt_!E6Y&&@5_bBaxx6GTn@4I1 z?~i^lUh`DJopoYVn}htTz`|81+=L5uRSlL`A=Xg7;HSL*L2_K^DwPvAIO975IylFq z{z+`~#>iN77V;4r-B&rK)tJkvVwt(_s4b5DnvX2vvpj(DP4$;gXm_1T4TFJh{$^Am z>*m5gQj55IX2JX_^nbG2bb~cK5aJCo-z6olWH9;MaFN@&tsg_+l|pc0G-rAm_?X4_ z!)3Ui!YBjxVb3;|O@?S3MbGjO8%@tjXb{^XtGt^6(&`2$Y_=G@a)lftH)H$MrHp)o z5>AZlQ^Vk(eKdxARIA8;$zhM4GV*oGh8%~m7e=ETXs?i1MQ12c@ib*Du2@rC@p$Se zTu3U)*xlCP=APv=*gO^do|5_S=APvg7KKj*#+~5u%g9t>jdB)jZonvm|5@iVNU}At zpV!E+yezmikMDYhPHyBw40v&Hr%C-mHm<84?kzz!ik={DPgkTz=nEL{%ZsGdXVZAo z*q_k4TfyjCm61CGBj0SVDpA^J4x&zDe=_Ox^~`^nYFzj$yIEqm^Ys(?K}S{C<=FJQ zY7BJM1-=~3Ep)=5X%XENR<$v5rZzs$D?_V2?LR>-sJ2~R0jnReQmFx{$73pFN5hNix()Q)PnB$ zJE)I;%9C@xe|dSKpr5nYRWn2ShJe0>Ev$jlUh~hC#PwL>zZ?p8(=HblDU%iG7}x+# z?JXvL3C(#6bev6U@er7Jn5!l-VoIXQo#Wr4eWa$PLcZ-vdqXz5&zff~-7<_gG_(QV zXVHi45r9xA@V`D8Up9Xy#!hQ(E_L{VUt2V85S=Q~HO~4IgHj+oRUa%Zdj$E|)Nxpo zcI<}|9j@q9om8`A(U{_bm-g;)c*94g&2F(&;Oh;cj|`CKZTqT$a9AiG!b5?N>91%MX(e=*SO-jT;kXo=`(l$Co&v`I z)Qg;S@Ai zQ)PeUqf4fYpU(kT>9`(pH>mG}wFu^7HqE1NP3Tb%LZXm^B&@eDb8>rKlNF3H+C8l5d`b` z95B&wB1hhFY8pBoe!qxLVx4j?xKG`Ik3++?5QpX1A+KT9zfZUF980_Wlpbfj;5DS!QhVoxQ?jzjBhdOac33A3CEm4XB5IaB>HeoVcfeSjun=D8F4|j z;t}*7&UjKRf*yjlF~?Ky7V8yq!KD5Gw3&sx6qEWIG-Uj#G;`xWhf@rCzx(Whwv&Ak zaUT`N{Zz!=SQs}!)0(+@;kxG>-Uh`3dS`A!#clMCZch_(!X_koCevM?X{&!T-R z3gfy&+=Yep{zJs2D+~JeYY{iKFyB%UcTHj3ts;&U#$7GqN($?p#N#HySP1_Q2L>Q# z)#1z-z6ad-7tO6HEOv%fY&I3LwB{pZ3*wwCs3*+)Xb~vIB2nzt5X^mj_Fpag#OfYEAdwA^>OhAEvXy{ zq&8RyYwUz{E9oFsY*M@tkQzHyqgw&&BTUx%0h$xjw<0q{a&>kZ9f-g&bS7f*haOcn z80!fFsxoYa>Doqm&6#Wzn05xrd$Ln-;~)&kWJMP~FhP9_nRcPs)Bbl2iOXGR9of&h z3(15UnZ-%RBjw;qJYgrc^sUL^*q_9{HvArB_V?{bt!Gbf#Use>-Y^GG^5G)zSfEa- zRKr(PV8`SQY=LyqUN|)(#GZYHo>Q1>7i6*H!U=9Yl{#{scjL&7aA^hz^0g8230nx; z`lCm*V?(7C5&?&^XlhrH<{FIsgC3XnP<%i4UXwan0daOG{6GNG<)=P9ff((C)a=$i zEQj}066{shKhgF|aw_AJ6QQA41@l-v^$bA69>klltv@n6Cr@(q4{3>{_PU&(z#tjk zDQm9ZIbp)4Cispoxifw!0x#JTm~TZ736nLG&^`1{pWvpQ8RT7$wJ%4jwBl*7{xwu5 z25+EO6^xVEbIj>)K^DMr7S?U3(4c0>66ij(OHpm!1Qp;*lYt|igAir*q9$C5uo(}g zlhGKa)U#mCCBK!lvdj&DXar0Tsg{hs)$9jjgvy+&e*itT?Q4QSmZ6*B#J*n-_lnpL@s520uf3kc z`h4zqXKkYDJ8j2^nMf;M$1l#}$%*=GK9jvfdk z7E4e~XwxNI9(@9tdlXjt1rc6U2~m#(E=D00}t>MoPzH z6LL|O#cyHOD!|q#_;--qv>NXo=T0CD@*1N_`w!J17>|OVQ36`@pTWfQq@D7k1Hy~H z39S)F27Vyk;Kl!Sy!{_e?&lox?Q?rHGS0J;AS!p;wH`O=8!-F1CEDp~3M6jHdf{sN zEIghurC|`skoo4?sv2qa;&V^)q3q(Ja_h4{q{i`$dT^wJxxT=p`8(S73;8m#?s`7Z z{xHuNeHKeIqMZS&6wb}^Wz91|qgZG4BmtQSCH@9i7pw}1y7VRx*I=3eoOLu7zF#m{TaR9(RYp@knU~hnq5Qq~56Hl1`M4a5Sly?YNccNo-l+Wx$ zd}rPsB^*1r^B_N6N_$r^%bs#C%#5lYC~sYBoiz=BtlRG)nZVe3AX3$TL%bY1N_+^C z*h+GtgGTZeRuj0fBQgBda}eey`~s!$-y=Q>AH8(^-zY_Y>G&@G1PS_Dks$u^5j?)s2HpH8S`WS_-2JfP z{e&6?z8YT%&xj8~qliK7}fO zJHmpTeO&cqGq)aS1MdJ^?ZPJO18r`>1+mg)~AQ7bG4QY_ynoctpp$s6@HUaUqf zBLT$Q^(e{|w(CxWMZ4%k7~asXI=p>#yS{Kjb}){aV0{nASaRqX%TE$X%U6M>%t`pM z<(t4RVf7EZaf3EvxdBotHR%i;>}QEVBe`0Fm@vwL!^nC+HZ&8V4Nc@DH3N!G=KdT% z6vicSzLjVIVVIccQWs=V5a#9iOd$|s2t*}7aF>3x_sh$F7d2buwdV|gCE9%lhoq^c zQhYL>hIA~Ht|GFgA)Or8K&s zs0nP7z|m)ID`5e)vc%n?rnOn=I?l^p%v$531kHrK8D zKl1%eW*EwGN_1LwPp3fg(Wv$p9jSP`}+gb)G`iro> z(&C)kTB7gZP%KWLp&0fVsa&U>UkV`q5Z}gt6xgOnf$ar_{*4*5;3hf)6y6+6RJ3bK z3>!RbNWfXvn#KghlHb#9s4Nia}2+KnRukY>HnN1+0EYGODyOq?T_sFl{1 z;|1Hm*v@NkqB`gRINh`f`5|H28_V3-%=ft0(%6x?mUK217GY^MXrjHY+?&jt3VP;) zMFSkE@|9`PkAmT?GUD2mGqI0C14(Jo_n>2FM@B?n>{&`zxWGSsJ&~i$*>Q~ei1{5L zlDEmc9dFir8=$|z{)b}&*qsRKuS&6yUS^_evYIIx*F8v4kM zRpM}goLGV_z9ZURr!vy)+dK3&9PTe^sWgerwjHN4t&v*oqtevgQp7jk2mzKvoc>wr zc)4F%yI4aBgg3fY;+q(sSTe2I zk{d4LyQmsm{DB9~+W};nMeG!fU zgPH`IKzm@-u_RDKSi&)7DNc)K{UGn0^L49l=-9}E%7`@Ymv*8=>Y$tK^v^OQa`MjZ z-=tjsqzGOC5KiE3hgPJx*p7pTb7-G}&mR)mT_cFPx6sW4K|a@2Hw6)AX$u%5ME~ zH%a8(;6=Eg0QZ>Cp%?F=*_}D&2YbuoNVP}@hi#$VuRtbZPz%V33S5ua-5*eq47X+S z|IL{}% zT)f557}1uaI7#A)FBuLxV4KNM;wl_udmxEK zr5(l}VU8o0!8oq%VASF0Do}-jsyxPN`{?`--mEI3zX5ZgvY~_wFq|%XoW!{}rUrnK z;$-asD63V*dK?_!OcCBYr2`U){o_iy1sKC`2SA!ZY`~gW)dBQ z*&|!L7J$KQPvY)CnHlY;F=60fYFh<4VjJJc+ zbqa$RDTss7b}-|yh)pcW9^P)AOX(IrrV*h_(mcX)B^bAjByNg9x)eVLMa*^h$?<2l zXf$k4bTVn`XuZp%jSn^zmp$$2{*^SMlBNa zA0Bf^@|RjPVbA}eY*7tSb&O^ldzxlH9Z({DgUn}QK3IJqJsIZ&s-zci3jl465-%7P zNJKo&z7uOn-{ZR6JDfRVAF-t6TV@KeowB&1Br;vb<)_f+C{601gJB^{srxvXP@V9p zf`*KCtBJp_+09H$I&W%VO z%~|nt&H!4`C3&g^{h$Rs6igQ9U;6*mBGD3yKB5t^hGdqDFRL!!wQ(xLVha-w0J z6Gf`NiVF=K`pm1=xZjE8xzzykI#k0Q4*uKt&#^2-A#qJvP=7^=2hqY17=MsWseFb+ zWPr`CqU%Hbh=J{Rv8N=+%7a`W;F1MIVjTgOWf}QlhQ+vYiK~o!r*HQupU}*3o1ajx zX}w=4Zg=zPdK39gzojN_bwWF*zH$?*y~!YMgd(Oz7f2{Uy#{l^PYWi0P_L_`7hL61=cbniykG@!(ya^m z`9?DcPRW)84eIwMQB6=^N~3OMaXMFSeV#OR%%D2(!r$O6F|ULpkmDZu%5Hh+)x`d= zzG+6XH6dzgJ^+I!u)cxEbrLE1+o>$AZ(uxYa9UOQ+s6d8e^6~$-;j6oIeWq51o1y- zl`F^&9+%7hTVxlN7<>1C#i0fFf}e>V08MgQ+&YJ+&{}j5#l2isfR_1PCa_1C9Ylk9 z`YXI0&!3|{>kKrm$fH%Du=rt&+z8O!gf;Ypg3$4IJh3>(J#_rgugX>lBVcr*Z2*jp z4~4I*n83~bQSX$*=-p`4LsX0;`ycRf8B_LP`)7yoICP^4uzI+i`S#&LK4G*w6!EIz zn<`rukE(G*|0k62WU!y)NeVy_wVuWH|B3>DGY4>blu0Cg7)8otHj!_&Z5TueFyxG z44+2lw`IK#cV?ZZc;8e;zF8mM-ggwfYZLUw2mLaxOD2N@e6U=yZ+rA*nZ2+J?Zv5z z(cb;R;uj3+2ijLn3Z`QMQ||UdWrP|d#a=-JF(*gkh=E&L0rvsgZcAK!K>A%*tT*a2 zhae`%Vrd#U{XbeO?Z7$Z)))8$lwu=LT+5WBOpx(vq>k?(%DbP=7fq!lnUysdUbY<| zqE7~yl5PsH`K0PSbO7B}*dqiK79uG|h7p|2=jVb0&b@tmxxyFFKZU!iLhHy6`}WF1 z=VO74nRTwo01^Ja7K2ow+zWa4c}epvxR)Y{WLf`A29t!U$4wa4pepUvL2Z?o;z?@i zn0HCQaWhDCja5|4aZUt$j$8TfC;lpGGMrRQ`@E#(E)raJUuAuMrT(9QJ|EoaZA@jl z%S1P*8ZXFxAi7p;Lk90o41ouJ9nII{^n2x4_uw5tE51TC$F50= z(JkWof6N7V*!lye6m159%VWe{fb7QL;%b}=LGhq5^K&RX)R?Ex82w-{d>;)=>KzyC zQ+c>&V!2pT3yugJ8^}ZJzDF&dbA!uezGg~<~_h?kZuNs*?T7S{}5ul*OqX}#~=7Mwb(`1O52x=A8h?^<&$9SSM6iq!K@g zCy|Z=xrO%8pneaKQTo;h6|;r zDVRF%mtcicF6%$W^jT8Hd%vOxV22<4I5|hpahnKZ21;KFAm}0oH4lYTCiz>REf7#-zH41eR-4X`S1)G zxufrWdFYZ#?HE>nL`XnJ=4{S?PjK^ykeBaceJJFmg|QQI>IBKlLj@R6+G}zcgS>=3 zwv#Z%;gG!iDvUv1np|FD-M{Tk6yx$z+YN5B1XJzDRW{LbRS?(yMzCy8Or%vgsJUMM z5LTvhVQ?Z!#Qe4S1E)+WR!@Xanix`ptRsm>jzbA6vJMW_$vIRnai}RZMBV=YVzJ*N z>r-;}s*`+pP`6M{?G`-^9%6Bx#8zGnIm`&NLw-O`P_FM2@5t%zhu?&iqPlM}JVY?l z4sWHoX5NE*x%m^?0%?N#oC25>5Be-&vX(Z%&p|u&9ejKhXSZ$V(cd6T&kk%CU`%tP zj2(mJXczRM|L@~lz2pDY_#WJDkFTO1Ef`{R5-?)xCqzGEu%t2{gLfe4(H=g+5}8eK ziMnO`k@=nZ)#gqh3yZzcuv%#EfNrLY*0-5-&ux(Lp&(NbcgYE{Q*gB<9~3!znmsDQ zF$Y<&|AIm`y_pP+lG!u}fP=;|SSHLHAONU!zsB0lB!^qUUkd&4?E45Tmpp!~+aPKX z8oo-4SCw5>sjwFOzaHNJfv3y7QheEm7X0&&6RG41(eY0ZIqvqRZRZBmh1;L@@}qv_BBrY0XMZc)`IeuUgAzep96;ydL*dIS z)o`$)p3U6|+s<+iHFGjsytPSXRXfDxk#yN4)VFgcTsZT=1!xxTLh9gx2Jdctht%E= zK_$f=M*ZIX_V~e}XxkC^^BsqM`5z?6!du{y_3$vF+W?!J5UTvokOEa+cx6GCm;2u3 z{2bSQf}0-#)GK{FNM)DyhAo6ot(59i_-e zD0TzoG)Tbe2H5!F7vOk8u&d2=&aCEt% zAH&tk)MIJ&&i1cGUsG8#At*Z?CLy@hqhe7|WoOY*X*vL4Vdq`o;0xG+Sr^wvsO&*b zK(wg9ec-I@7(ZMpy>N;idT>GFGN-SD$W>Yq#9oif4>&7w{+PaRwRt_6Y z$1RpTYvvSOGj|KBhlj@(FPwlsuqwoxv>`ybQP8NwHxl5<=z> zGG{tye{3*VDcB78O61(!lpfN2S_q%c!gPXG z4T{9wA*ZKyyYwAS6YCvFCy7(6YXyx3v8p=(2KHU9-YCvb29WLfsCDEHPPa#)g*5*n zpue8^S||0vwowPP45l|0fkl4#%ZE_RuG#@Zc!ii<)I`iK zxxLDRBV7YVqXony=9fJt(dY65=p$&Nae}9{{KLD`+zLT>5*>^I7`ub!8|bvkuI96N zDxbw?BRRy*53w6d%^7_BF=%jZ!N_q#4-Fp;J^zvk#S^zO=aPJ*;XNs*HPC{kfmUkF zYUDh;1B$ol!rT9rFP(3$L+%3BG=To4jt7x?GJC>7^g?3xL)6>siIy$k-p^S4iM}_` z<;*-b5EBv#s0{AQwYYyQPrFv<%~?PcI)YncoaQjRb2BkF$ji@>p&rX|)-+n~+Y>nD zxL8+ch~?tJa=Rd}7@3yjSXcav?hAv%MG*EVTL7Ir{uoP3{-}^YAr>XOJ2ptrb}ANq zd|-z!Lw>6U%8y#8NXxw>@3F(uQv`g1mB$|Agk3`c6_@L^pA8NhS*)<7WH`m5viWQ{ z1A1oRkR=?KE0GyB!l2{Z*n+dwxI->$K8i!7!r!5gl3t+^6ZkWq#9>pQFa%ajv__Zh zxKE-aaCFRk^9tk~I1bAMoDjRM)SL~994K{2vr?Hv^2Q|3p2GdLg7X{)&}_>oP~5lX ze--7#eQPlH!fTNFg=^Q+6PkDz(-X$oJj`IKe?W z5dCqt2VnQ}xpc|%*u zyuGc@e1kGb_i$&ME$hgggY3~O5lhb*5}u$>yl3h2Z}|^5iFV*9v_WSBGk@m#CKZ{J zqJHl%S`}zs9N27hlrKL9`ZN1g_Jo0YSlcXK8~KIdBXsbL_tlk4{L5@?8ZH*U9ajt8 z?9NPpzU}LZV!s#GMrs{hMJTSDSC>4=oz2t*GyDR77}T?dzFa8o#vXaroZE5E(g z+sm|>2>7<%{x5t8=>Ww;)8Pk%>E1&knSgEvN#EVUKZZ1|!Ya`f(MA7GvhP#9(GRrm zP`%KY1{nW|UR&4l0l_gC>S*+v@!qt*oLXkxYS-hhbl|qTC_c|MoNk(@ZNYAQ1I^Y~ zh2gXq1?cd3c9;EqC8+A~LnT6?qY(B@Hu$upsxPIQ;2(=!AAk!uTA$}lh)#;_j5e^k znIL_fx@{gyo3_vzCzru@!6Rg#v}$rSu2ZV53bAPz@q={F4e(H|hTp)Brmq=SmMO2f zTV6y*aS9%nfsnjLKFDgjiB<}l%8wY?^8?7;jP()i-C_#J?d2+NV*xJ^d-4tcAHT-} zH(0uv_JFkdRpU-{8yX5??60gXK#YygLjODXjuP^qV=hk3Q^|-k44BK^OyAxQ?1qH# z3Lcf-ok9vv4!iD{-8OC_b`qpoTmqZK9Vw|LX6p;B$c_^Uu)$h5pc^N<;mJ>9bkO)1 zqq~kYGz!puFk8AE)x~!v8XbeA80Xwbxe$$|Z&n_J)1UJLgT5bRWlS!p12e>3py$9l z@-^gu;$u9Bbcke^?;ivV`l@x~|ISHamm4=mjhYyNKf8h4gqxd@JCoA4_bh8gLx^7a zF!F{9dt0KxWk%5i2=)u`0QreS(sbw<0XQ`L8!+1gWd3PG^c(=zJUbE+d;)s%+2I<$TcC0*VV!b*NW(YO$ zkR43}Qm}Hecd}e>H?52!oCvbO4U7s9o4J?~O7I+z72QoCI6wL*lq z7kdrG?8-_f$y;>Pc$2gXEnPa6?;ad z3;2H11p83*8mIPxKmc_QU8A1VB(YI|`|-NxAP_whV<P%?4~ z&R|v|L>2{p&MysS3WH25aF69`*0UgzTARG^4C@1FN0s>u=d(sb*5_5!7#gB`|&r)vVhjT4d1q>HM`f zj~C>NJ%W7NGcVz{REj+y+Q!jk==~T|eFvv)W3d&WRg&=v0zx6XF84MAZ)_#OK^bXP zFDzWfL_5{y)#k;B5%{&gX81jnSl4B>b8ulhV@==`Hh!R~Nin*I;G|n;?2$EgLa|>* zl9q7$G6gEFzzEd2ZkQE#ic*N5QnnIG;R*)=zeWlaR3Lr_YnWxQf?&C^q#)FpL~-Lr z0@P{&x*7q25P~n>Xr&?E{FD_<=XI{kMbrH@BExxw8E(x*&%s-6Jez2S+3FJfTNgEz zMlM~KvY>7OL6~3TlanL>Q2L^kLdzM`ffU>TR3vpg$Mg6dW;aENagVN{+i|AOX}*fD zt3v)_G3it93{sujG7{;Zbo!`kmg;*ka;El+3TMkl+Ak`La9k08vQ(eUyz_`NdLEh9 zXj^h!(yIIts$9dg;Q(=mJ8 zTyaGgh@j!LktDDJ&CUERAmy-kmlfEBEJn-<&|1TI!wO8Iz|X8e9R+@D1%ec4C`_qE zK(xz;H)-`sK8b;g3q;J#Nt(FM*@-SQh_+%Gk7U69THX z_!HdmJw*SQnv~%&r%~R+T!?QRuT8{f-F-*9}sXh^NP}_w(R1=B;R@peYFml~ zZ3y=_zZziwpq7wdO2>JCpb~Vxok(UvmE%ulC3qi=Ix$hCWv?S!NI&7-N&D8LGs8Ne z_G3s~if?yhGP~Io-@jn6Joe_9i{S@~i^XZ-N_GOAS4B8mj!z!GJociN7ZE@~q*K|G z@&HuyX?St+lh%Y2IMP(g>=s<4eT|#U2~zA$v|8)GR9Z&-10Ppjz86pJ#HHY0(h5>J zwc|siW!vcG7+yBwh1v`Eiua^AskC&kVHb~`=^4#;(fH--VQ#Fz_Bhso_4;ADUx6^; z$Bn*tz|jKwEo}qUObRzXL{}(dgDv%LDfH@4VpMtLRGjp$m_;Wx+W&(V(glY#vhR?z zf<8?eDu$UcQ{&qZ9qgOw85PMp%Ho)Xo8>d1wEmD3+gaY7*dYNW;EGRVmwi{yZ2l%Y z6Ng1V5G}~3VX!YkL(o%XYT1ds7@86ToPX#H1$n|mPr;BzU8iISR~9i9_8K>MjwaH@ zq7KXHU^wzSSL@=@4UQ;2Z`1AUQARg7=~GQ!!b2`G0{2ydC2&Ht$#If-2@i}HZTIT) zXyJK|NJ{%_FhfNq^2VnfER(LJ53;l18>IhY6pZNtwP$5dH%q}GXwuTucJp=-ej3QN z0<#o-(P1*Qu9n?20FsV{uSfDkW{r%oHVmRR5{Dk}(p5?Ax6cxT= z6uyau8w<)h6-LVoMb~Im*8Hsyn>+{FPPnlRAMLBS0)#&((3F@kT2v`jb{A(HotwcLdvHa)r)|Fu791Gr3CVMVai@HET_V z8+I)HKR8o6;%XU#`^ow0vALZzw*38Ph3z9v4cDOTGk=1SvGgbCUAk(IH%UEKYz;Zy z;9)R%X6E5S`De+KHjXTPGnp4*dnEn~m95Zv>&GrD)U|emjUOOM*OpTfr<^qZY7XiLACo$UBVN_tqRX&xw{Bt%f?gbkl}qtKdxZtd z@aYPW9Cj(>F?cZ*RZLM=Lwmbn6)mPtW#q-DQ&sPqsGN1HOwqa?%~G_$6w*$==0?HKUOrb0R3N zUSf42b_=-vjHb}-j-xQru?Zq4O$~}}DCau|)2i7N4?Yv_OG$UvosD%RESSm2V0X>+RPZk^>c#~CTZ|z179bdxgY{bbFH-C&q@reV(Is6)A=(5znkE8ohqqU2t}e2g zhZyNMUEo_htARXL^X;D9T~}#d4de-X5vrs6= zTbiY4NR_D338WO7@;yAMQxF5CO)BHM80fo2ueFCitMbb_pVs zMA_+zZ={EQ(rKP{2Xaf2gUTmOra3Em8xD@Xw_shCO*(9EEA&;my9bcz8T~57I#3P3nlzyEw zV|^RaT&O5uRYdpt$RoFbYi#5tZbPnhe0lcBDPUHUN9(l>JS?r^-8b$+bXsdd7burr z+nDB?R}{$9+xUbO0HQI!EAz`}O_BkdIyL5#Kt1+zQUVMh0pLtL=nZ>4qw$UK z27PiP=o$h`=+kH(rwrrte5=qmWEZVE2J#T#C^pwB3J5UNL2jHewj!(5FZ4ABVQmfq z#pWPTpa24CHAY7s0)_21%+Eof*c=23m^GkG-h@E}pgs?P!Zv_QasVhc2Y>?RM?|hU z|3?mr8_$aJpeSsE%9Pmnpx7KJ3YZTA6bC?d4kLw}7CIgL7S= zunpjSL<^dr*c<=~m=D!C2QE9#x=h&rXw6cWlLFpWD5jzP3Cv9Nx++1~& zZhz%VYa!O3uZ2RHKdWqb@g}&T=qtA(Y-{D)@y==+NtoY*S8%)rT8hNlDSk3me^SR1 zdKFj5--_4q#2#BtXZLJ^f^pK-BA!F zKH5CIr6B4rBG=-AsJlhf!h$GxXA`V55rxsV$D`wCh+cCk8lr3YL5bhUGg}xQA(~m+ zXwFA8kR}jx6;J>K<@5tZpY2lE&83#d8+(%EAC7vj^x!ElmN_e+Z`5&f)T#~l2b@Xy zFphylzYZ}^!d6=KAG!6YGjMiN)^>d^Ye{@ep}QGh1-aT|gM5bQ7$Bb{keMocI;~7# z9)(jULwpgDZ^*4D214v=-h^8mPFM74)ucou=u6{zoyVHQ_TcF+VnqU$vBl_dVm8!0 zd-94zS~cY{<58rsDUaxNNd(u6m5jAwfrxG}?&Rr@>2)t5eWL)8Pj57ShV-7gSMk-* zt;*Q&OlkRA;CDbaHo4JIkW1B`sYF9DNVD(|pIfDg*^gsMVoL#sEzJLixp$9`syY|` zXUG5nqdRD9W2H9MIc?ISCuylCQ=rZ!dy*ZPU=&nT+Ba=Dl(w{Doe?}jGB}fv-OT_N zYPC1*X?v=zR$DD1-V%@uikAqjf>cGT?TqmPwv~WN-tV*4p2 zYdz~(&wAE#ApuTbqNL!wuat|N4qV6EykK;EZ&G+zKQzTiwW|;6`Lyms>|Ms72%Bk` z!fRiqAt)D*gN?UX&iP_GT~IktUXddHeUZ>^Bi#+uj8bLpUT%6-{mdq*pMO3*b_F2C z0AH%_5FM9HLxoh+?+B+y75zWdb3)) z0@udb?GFWu8`Cp`h<*83v#TH3T|#P!gmw^hFoqDKgb-WRjcFoHI5oD?lE0D-_EKo? zm2l2W%ej`jODmi!E08?|MQDLDv+r7=%gWkM;3H^{?a|9)7b`6&HCcF=iRBmJcT3C}#rat{$dkkaX z(OJ{-`D)umaw!q8Wp@?Fy#PAtVor{XLi{4&(X6zq85d>iQB<5KsuyV4_;;(r;WyHC zgEOGszN;bM*z!k3TUZSGh20R>obm!0S}U$$AG6c;r0gwA!F_jJZz2zf1l-~)#$w{y zwj$dA7D+zDz{E8v{tw!guNX@<>{w3mE7BEG?mKh`Cfr6sS%vF^|*};f2b0Ff(de02) zj3HvK!&AE**a+!IVtQls;@^K8`FMhK+jz{1$c!#CNd@}0me;urIG z+(uj9nw_5hy6s+p))RAh3-2PScg}aCuP-$>f2^bbg0S(u4AC+^vuM4xSZbSZI`3{7 zWU@z6`%HDL5ic^GU5g@4*#uNI$Jk!Fz$!(T9TfaDLMLGC=mUJoOI3fZvl%wA3gzWiJY;-%>v zER+@Y%2Md((UZ+xtl!9~i}940JiM@N%-^;p57)F$Q15R#ba>lc3#)ecy9@F(oqiWp z>MTbVwv{kPy72`gQp5GhBQ@=(t3>jaa3zQNBKYmqch^FBU)ATA9OAK0iQ7i?S0#8Q z?Bp}Y!=$5QovT`UleL1vy~(g#jMXo}48c->(aq&j{$~<9_*DrLj~DLx zxRbw3;t%?UyFG=w3X;!OUn{xOd8ZWas^x|HD)KLVr`pY}Ud+%3`(PVYF=4ihs*U<` z>^ACequQvm$Mi)}?u=@qY?6=PMwMK(QQt`$^_{d)b-r>Auc}N)8};4)qK*0a>dvlB zn}g2m1<8R4#%e^VP}aJ|5-Tu8W$+fIsEQwRaG~KXneaW5C==c+m(XMJKCcT4^g#Ee zbgSM&i;`=eqD+-*K-j=P~0lm&W1Ov7{ zdCl~(%f9YjAkoO|>lEe4Mvl^5s_RXjrIX73$)8D9$`gN?q)-%nSD+~B)Ii?#CPjh7-<$lr zzKFsI(VCOfxh`^)hDb(*nUlmI9l9O+WmQ-Hmc^DWFV1)B7U!;FCDr)g>3cAOgz7^B z`8b1^e7DF*C8#R-ZopXE$xV9t<$g+ETPY+Aoy_8C4^?y9R+Ai@xLNQc>dq-PnvkO$ zgkk8EZ-mQD2fB%=I|ln)^z2nur-wZP#oNwW=~YJ^NbBv2(Q%H{*w#{{u-HfmzGQ!e z^ko>mYz_#)^k`fe380Q*&PgA12Q%RT?s)Sa)%!xb+xviJWDXHDlH)us|H~X+9m8@+ z;nX1?qz>mf_B;r4YJNMLCJTY&;}YZyca1T6P~Q! zS4dU5U74^TFKJ~AHIYH7M!%XaJ(CHC`Q;)@2^T%p!+NTR^}-Zx(J2?|l#6xBCHkV- zlthAWYKRg-k5u|Zm!#(}lUT#A0FX(n=T~J+Y~)Vd5sBeWH(C|&x5LJ+YmgF0*Uyf?Cerf5H`8MmPQEk>K7t6QYhlR1#fBEyen+}jb z%wnI6dAfeGw#nh!)J)w%RbrjW?9{cmo%2WxM_RYUTWyB;(SkqOYIfdYVem&w_BcTu6b4Xsl(kmXV}#W^Lf=4bg;QmD zDZ()P|D9c;sV^ zu0dTyT*vcN2K)2gmYWVKF`9evBgUN<6ZX0XIoacE{JOIeT|j`?ZaJS6dBBi5D`r<_ra_?y=3Kc(wMQ8`j~OZdMz=v4YP$;G8bzd_ z0}bh@t?59RF@v|@7?&Hw4kcAmHAE(#Vw_z;la2fI6dj}<3Qj2zO)hb7XQAQw%_Q~dc5ejCSN7eK)S5FJ6JOECi;pCO#>=hvNBzH1&RG2Aj zr2`3OV5X^6c$6Y|lt$+fHMPGXQ~O5HZ6H1UylCrT{{S9a$Yt3#qC*JlLQgw8W~EEs zr?I~D)DF2cId4I5#NS7?)8juN5wZ)ZYn>fR%PX+Gn3R$qZOnw^!VOH+y?jJ};F+V) z4J*Ci_R9^Qrl9CI?tZ*u+yfEC1M!S}(t zjmd4)!EBm~sb<*$IGB9hQ5$^3a3868qF930r!b%we(i0K6|moLlDa{6F9tasI%&z0l}CTh9Kc2N9w+QNil%|jlk_UHS1xw)+-0IkW$$h2m+#XDj zi^;VlI2p~=aYBz%F0V`nj_{qDT|@jq)ESsn6gUV?j-5&`mrKz!H9Tnfw?@H;x5O`a zB=ooTXVQUB(f^2%pG7M6UNrP(SN&l87uX-F$}InaAejNB*e*hX3?Sv94(V27-NiBm zlOh5f7B`eLfjiKb(fo<~UqSb4)yAFwHQBvM@}vXjseb(efGh9lG#W9mO~=|!c6L!< z4>00v*y~vd11??rH_#ew*M05J>0$^keu)Ge#}6jwfr@^1px7Be9kVPOJ9}1oY6Ybl zn?6Em7wTS3ZXIL#pNsgPGn0SAQ`ZqYbU+0ee=Z#%!FGR0t(Wbabz9(v3jSFw_v=BT zoHJLy?zIBdv$K6w1K@{JL4JS%7;1+%-|-FfuQcb{NIFh)SPf)c=s%RZX;2jnTHNH$ zTU;EoXQiiC-%lTE|7gah&(OHb3XMZRP6LSoyXo6Uz3ZS{{ri%CE5gO-7&|mzfvNFc zPT|JTVq(AkREDJedqcywZ3urx%`cnza+ zX0dCdGn#PYnqJUX98J&HkRDRn;I)cm z+kQO2%ZY}}F56Yt@~GP~5OuNji~FPQVos}20%h?pMkE{v^0Oc)ZuG|(n~DWJ#e!}O z9ewdpJ~bVc@_G8Am>Z9Y__vwVfM&`7T(%x0rFb9gE0 zyoOha^%Qx5-`I2-?qX%0mm8a|WNy-O@InqE8oB4Bi0Yb;dRHLXE$w+;37Yw$=_erZrls%eYc-chy6iG$%CimWji(6koO6^mhH{av3kHpj z`9d$~_iEd31?gp>Y5qX4(cjzX-`?nd#CE3!DQ{j-+;Egh$Jb*^zNyI%`KcHK5GTnS zj~MZ;ycB&lde-!BCG8v_lkRNdx;5f|np;NT(TKl~yNeisKGVO0;-bMpV9)p;lPrY5 z3>ITw**7yCK&38YicyAi`ao&dxB>#g2Zrtvlr+|%Kc;YQTg8UVY?y`YKw_S}>ag+P+bSFbV|GOa9 z_$KCxvFUsQ%wO)OXQhWhUV1vh5;-|&rOUu4kh#yl!?^R0p!Xx`)EKX4LFdV1x)3~x z(U#a(z`eZ9fwDw$iv>&jCrE!voW>q1oHtHJ-Wo5MESP;6-aMaVFu6TBQuRW_e^5pk z(G0awlWeyd(reVrF?$Y|T3yj1MI@u4*W&nC0_UQPd8vnZ0RAC{-c;K+cY08;N?}-W zF^96KH)^~Pm%SfY3sKy(oTvNoxt>2CW2YXKE%dWE z4TTXv3e)K9L3RaLdbckeLH5P{exKWbzVer#xD9AxC_#W#wFfFY4Hc2LbJco-^@|wp%?a|lb(e#z2z7MMnz2QgbG#X!_gQ71b@)U0qfT>lZ(w0&zU3zRk;yJUo zp%eyGbfsSBu@POV#QjR>X>|NVu+5#THq2tMzV-{eh&u1HKW}p0Hy_{$&ZR%k4_i1a ziL)mVBo)h>)WdwI+Hp{co2GU)C==sK2&s4?PUdJXgWq!H4913+YcL`>Fx1Z50R$xgsVj zY^<7dTE$2F(Md?y0@tcFlMoWQSEPs zJBhZeeCSSZYxWGKL@mQjy(kUCrziXY(Jd}1wp*J~%d!y!MJgaYJ+@ocm*+p&%!XOz zU+{J{(^gBxE4DPYg5A?1lc~ls(n>AR+iMazB2vcdu$|V#MfL(Xc1$Typ<3b4UD5=j zvyI=v`-GIM92MHe+6mk<=otJU;*b_X#=>*l2mUI6o6ZY}9%>*E`*Y~q zW`@Gof7=Lqo}u#^C1QQ{IOjEL`e$!O_@`&{U~>g0LG+mzYVfOwclND6h{Z+T!IjZ5 zNPXF_-y@ks)U%w&5uzTM0yZ*-^wMnRS%AWK#b>q98Tu`x(y6L#`Qa~zS&-t4Q}bR$%Q z5nJZHZVi@ZlD2d!f2e1Dl?!BHnE#gSyToJ42~z0uv61meF9COKVoUdO=C)-ppxTkD z6@rpKp8-4A-+RG{&p)cY+8kfL#%ALg_rf5?!pS2GMP1hO1|=FtI1b_&OGyZMN0&a;bsys0HHYu}@-cEJIEVX=v61qA+&u{;CY~>SFS)7f_6fDlP z3V{WxyLA}_=@~p}fc_iJ3RJtN(IS7WH>O0t=yC+25 zI&ksDEs}9?Q-un z`^7uR3w?~QQ1nlrP;8MLFefCdoxaxJTjcxQGELjWS=kUpbIw1i2zE*wB^--Bith19 z`D<<;Ys@hEm%Dc4vkX5J0eiM!dX-R8>;jfufdRzNT1A;9aGmYnI{5MszXmA}3)PW@ z3~G~K(xBy{-#_eYX%b`GIvQ7f`L@l{e0@8VLMz`?iv=&pqLprh?8+z#@`&db$&C4f z*vY28%Qv)HjZ_JxC68c3DSe%(o6awnuw2{?B>?xfQ98B^@O$g#^Z!zwC)G8hjU_31 z>spADXgPE3-nuXQd+WYJ)`jHZ!(ueHmdF4zqU$9sf4y}}`F|z%ql{0Hf)GgXV z$xKyTH!5yr3XM}5Rdv$kzT6pn<&{)Hd*zZlfmdFwvFbvNv42Y(8KVO&lb&T?oL8i{ zsEh$Fxm{oi-{ii(->awp2BOPVP_8@Cg6_ND?dEIpuwPte93B%N%P_?LkUV^$dTx;C znXzvHwlv3N08OV^BKbvFU&M+0mE>0Ji!{fpLP%^*j%@#zz2JebvdLDBXVn!sz*qc- z){k{Peb024LgB;yt69oVa7-wEQO2zF&`OTW_A38#*xbg(gI-YRZQ;~A@zeMqt;l}y zX?Azqc;7hx)uY9C2JCaRXz*nD-v6XGUx(>mrPr&ocCB=ve)XU2-|Kzh&6`6$@f?*8jr;D6#xZU+lHQ zM1~aX&Cc)hcwb#p#tce1{ZHimF=_BMJ|(W1?~8q8l$nwAH>SluLVn?z%R{Sf`>ZM}m4{pIg*6h+ARAm;bDnbWh4Nk8+ zcX{aTWe<&L#;}J{?|uj>fg@I4^G^Tvq5fA?P4T;lYcKVm);;z~Aam-1ibVGRS^JOB z=sZKHP3)W*JLNKChBWY4YVkBdjZ;p7S*_2W4ri3Oc0McZPsu>XNOnLI5|UV6;fs9{ z2M(nLdH`1$8!Np4&K4-UAjrisM=%VTOLy&xy`0?tJ_J49=gus4XO*zw!^D4P@rv#u zcRd7yB+jgo_`UsG+@$n71v<%}%Z=cA?myIQP4KMzc@4)O02Ex+&3`5Df3jNl0L(eQ z3T8Y(f@8HD2Ldv#?(F4e=&`FB@3m5geh-!$bcQ|7mFhUAf1zZzsf zRf_G9j65BNh)D!Pl6i}fxS1Tez83sDC<=tY&~moVkTE?rz-|HHN3Z(NkpRQIYh+B( zp~jte%f2D>=CX5WK{YKPFqV98F2@67cdXd2FdN_MeZZ|OlHedLlI1M|%LVY#ek2{o zYR;}<`9|z-6+htNpI}`43mv=E;23lI3RncmI6)6I#(wAb$!KrzM!Wj*Tq9f10)A;q zbieIRKsGVugA|z^|CIh84b6`c^e|7){%eNtXtB^S$&9NIEu`?SJva#b(;&+QHF znSr*wbcqe>0DI?(^aa2Athf<)V$X9 z;T|k7hmcqIw`^D>*qgGDa<<0|+MSEAuI2e-zIWxn#}3ljFF2}^q$2{w>9PX$Oi<0& z@&7V)2zyY#xlev`pX0mNw)O;I8EcpF#_3D$Pgpg3y2htxCNM7<4%n#qK0;o}&M9$U z74wv>=uh=Vc?%l#gN$-WzY$VRpV6cnszKid4 z60WmO!ZEqH&iZZux^lnNW~^!F-fqp{px#bT?UeQ1a>o&enzIX|aa<@VaKz4}>O4hs z7K=&Z)f#4Rn zeQFJ6>PWCAve~qaNS~XO)QymhVxU>~9qJT*LK%4DW*)e6flmvPc9K94a8rIEa(3mO}^}p74?qyWpudP zO#Ku}W{;x4H99^{|8p`^&IP=PT@7sI3O4a*tYKT-O$G&Cf_EA`A9qH_5Bb&L{g1u_ zyx(*8&%v9hx3Y`a$L4{{BM0Y4IArq>%2Xot&mRTDM$jEu!9H3~reOZ6lJDBc9u z-NECuRcZt~*2sYTh#zMlw@)c17Utgw8iUz0eIOK4n6>)_mfROepI@Inc{~fWO*OXr zTaOGQW*58fZ<2m!<|-kivj>F?++%eYChm=D;+~;P$Bll+4b(`(g+8c;i>Rlum1Rwj zzPsYdFvAV%iJ(tU16$uQ4Nl^Y(`4qT`OenB-|SzsZ6B{-S%)&g#n3JWU zL{J+!O-23Ey=6KFFZHI*R!7@-uoUkpz_s;tS>?-j8~?0WSql;Z=BU+@T`DoluCZa?3W3XdRT zckqy#NEroqMy>DjEqB!ddenCB^AL+;ui&lpEK6i;lG`wy*_rw(3kV#a(=Z*^qJ&}i zrHq-|r}8NmR5%)E4G9}-#oLpeULEEli!Lu&*i)*&S#DrJUR2I%P2K+omG|~-f|)GM ztD~)prbJu6S%wPfThXE~hqaEBvzO2x*+)4A7aDOTX>kTI*(3Cb=7W_i1mM5I9^iZ% zxNVL#YuS+`M5#5~9fR;Q<2&7j$>gsZ-zThchMWv^1D#y*zY%!?s`tyqJ)fcx)1G%biBhCP91wg3Lb=&tK_S+Iba&= zKFP3(uT9$|8+s!IQjrlc*15y+N$mwd-}xg>4Tr%q#QT8Maas%=$~2Ty_+bB5{Dr1b zgQBrn@i$Cg+9(-2dz;d+z!;QevS;(QgEQ1eVxN=oKvUQbH>IyE>;G^bKmD%|u*jEy zbJ!?)6J(Oo{((&l9y(u|i3aSaKMmLl&fWW+o~I9+p~sCiuKth-AcYQW-piwHMA5@l zNY!61{3Yp#ASUfKQnyHE(R0>i`gNP1&%LUuN|Bw7yXIPQA^KbLXHO6>JPp%xvVhRS z0BLAp?lkZFsQGJSCa>r3Z8Cp3=M!FMk{eO;_Fe#$c^jFYTq*Omg6BrJvy_yk`;e?# zrYkPIM0`-qH@Qxgk+XJTS+gIboatwHUFnt?s5V@X3!>1_LoS1C9{F#TmINY z;&m@dPQTa}dxH}|S;o@yahs~HOtQtpm}b2ex-pZRlMi{Wq=( zy=@#rq!+FV^q(#L(U`sjoH>|%i7jd2yFsJ=Q+F+#Re7CVR5JWqdIbXlX zOs)jq9w9GC%6>}ajg@nt74a>Clyv=`42z0r^de5y(ZbQ?tZSj^`3Yl>oG|(ISWSK@ z^s^eEd+D)7hDA|cDXK(c-KiASf4B0ttM(RT88*KndVXyXd?g+@@n%?Pgwh@nf-MZV zgi))=9z_*~v6M?R%!qr$wuR|H9D<&UMf-6L5St_?1?H3OM}tzU8y3OflwXl zuPCg?I&JnKFXGoQ#m&)Hy=qBK~(Ceh{cbd-AkyAm3O0 zC*;RhcEuvPJD5GwE91kIK~^FK3mJ^lKjXaZ^#`XwZb1RpPiE~b;QEI^YK_mM^jR(U zz7hDL%mBLpG6MUU$CGCOemI_pZMfy$Er`mhiW6pT5L}frWpFfKDVvjC@~W?? zC?1yO^62Xdy}r|!zE~})Z}LnDQ}T=IIJKzmQK{e}VpE&kCcU1XURY0u))#sgT3A?9 zf2y*@pOD9jnorR;0;^Vl^xL(S@xf5o0MPE8>Zwg6&zll zUjlhy^CJ5?j`_io+(#9Hg!TE7D2;mCS=py>io$+3ePZ<+G8dDwFp9oXv6{~rt29hM za0r?z?UozuSZk>vuA2J^RN+l?|8JnR9$A z8&4;xBvHHC`t0<29|aWV$1wl-TjK{zrAt-^|Jc_~FdZp+#DS2K58E!{R;38*Lkgr? zMuReVed5t}>Nv$J^74+B*OQH`1QLJ|vz>`t>`#l@Omnp}5uvYdNS=#oRlac126ktY zXLfb=^iOgwK0`jmhGe*(pl3vcK+OdxykI6tCG;)Ov%>mQA&tQ4k?nrNCW6t~zWVc=Ij5-B zD|4T1n5T&EA+WC&C~>hmk&C<(UsH8<{|`pU{|o!+ODlB;h*AiW?N47@9Ipe0%IwEA zFqPRexq(ML(W@(e{@`g)Ntfs&emU*pkYCeV=|kyDPT17AWq1A?Z3_*=epV2O>(1=| zuA*=G@nFBP7T%n&niBLi3kofe`hn&CR@!d7P7GMgVVHZjS!wr+D`)vOicGVtRbQpyKh+rYlUyg<^ zj~{t-RY;}hD?97i;cW6O)z|TVPh4yJ;uc*!Y_T0`O1Rf2QonF-*uQtPYKxkC-i+$4 zvuT{nDmlTCAyw?^r==%K`+q$Qp9<|Aj6=@}aYHQZB6;((JrQBE|#+jHdNEUlFe zq%7)K4jRqKC^Ql@hEO^4A!o}g?2IIU6zdMj_lHJrJ@hi}Ojd>k@ui-zY^(-zT{=NPdzM$eR4DPqfm5TfDJRG$My>~^wef0Zb`?o9$N6a^!YX2^T6S={lb{vp6vZpST@$3%^~7hxP> zWAhpgXsz^(+q(F~HnW0+K2J0KP@d1~kh0tFwOi|^OslJgF+wq2jupfR+HzazaFHja zW%Wb~V1<6MgO5h1=t^4dgOV98uj-okJmtK0%sRle<4@B&dg)ch_2>N8^9N&7}4; z_-y+_!i7abhuYC)>=1TCHf**~s^(&%!A~`nI=F^*wVVzWw6<%DVK=Q%U3Et5^R;~f zrTLr$>5})B(^~1&O;KmI%SY@-br-`+OzRMQa5`=QwyO-P%>D}W-HgD_*N?h-M_3IL zfRwB7#{Iwl=jVO%Jw$ZxlVW9I^u&SE<6*(4&Yx3ss8h5cR+Pm*%LYq5-@>o4THN`v z=hBse9X6qod|GNhD5Q^^8scRHuOD0L5V zEZvy49*1rq4an0kckbjScS?{mn@=MU1v4%2I@pBuwsRO`1%M%bdt&g9CKzNDT?;N; zHF?=SWKVJ!PPSF}Vv`creAyR2lZE_x_vXYAyCcge>X z9NpSIl1i+l2DnkI@ekENcDMbe5iid|SAVf6S?i14yePSRj4yU07j%WL=R)1z5d-7y znn6=7X1qHYVcECoL2d)wih8oh9EvtbjqVtc*v#c!O*a9O#^9DU>c`lHJ7irEVtHUM zh~#~sEWRHL({eVXSYxzIyS8?vjMU$`MfBkV3l)q; zhm2_Md0t24oaGPlJw5gXHJga^pdxv->OBEF0@V%xQC~xu0*OpCKV{D%ndy59b9J zqp?JccH=rx!Zh90<$|z?%^#y+yqe_6lDIWdWQnl9d?BIGO~`muWaiCGjRoWv5*?PS zY=@hp?yW-D&BV&794g$zYb=Dq7|({8gbSFCq!B{4zznI<+8^aji=Q_wOsj=P@|$!f zujb=cwZ2k{<~9H0gSg@OzRX&}M{g}QI%RB4x2cv+l8FnYTcbLgW#J+?ia?Lu zO4y>weF8P_B9@RI+9{IMwSqqd+C&P=oTlJec9OKD2vUS8Rdi(t<0u>7DK)$ev&=-1 zjAK>Y`iRL2(1_gJwR&q2QHx_C8HZ=hqHhMx(BI>KqM};qP~eB_oV<+!Y88o-=2Q0c z6;5s)sMOTDx{rq7VW<{0zMlQ#vzMJV#+N&tPXdXFte9&H*UDoo8?;|eR%}H@Knfw$ z3Lm`H;mMKymxwn^NktS0Z>u=T| z79g+d+>M92NCNIxaAB_z21RK`>m?;hQKe5gd6L%AFexnRYHvu5?wuN;m3P$HM5B?E zY8c!F&ttSbwNK_NWKXXs! z@p63coe_Y&{3~LPdz74uE?h4_@)z!UK2n?kCb$6`d;U6x zfOb5m=|GRjh6IX_bFqbOI%uO445ucITR9qia;C%_DepP10i z;n3s}VvGWW42rm5;DZ|LSQ#%R7s#N>OT9?vO6e8>7Od;!SM6_;Om1{?Z_qFj5dG?o|HIs~Kc)u=VLbld_2Vl20kp zH%sCGawJHkL5i8DS*oGoP@P-Oz~0i4$iFH#r~ij)zSB5&b(oFb(NiY%eX3#CY* z-M)AOWP2)p{m(h{TsqJ!B`0_-z}}!s7L1UR1tpGCvR(zwFQw#*q+~fV_Qhw>0SoA< zF#m;`GhH=qOW}K|9IyqIrSQ9sU$_(o*k$>`U*TC7K2Jcm{ChqC`R%%JnFdn$X0FG9 zTnZB`m?sRRoOH3wEf&vAw&0$}i+U6$`DP+YjmrfM&B0xYC|Fq0&MR6TRLGLtC|qA_ zn1ydeaB)(jISaX-1jQWhsgt|K-qd6Q$UH!yfKy4C0K+IUPu+YI!lxDn*7;hvbNyB= z-VL?Jx{XJMGMX%D*0jWWnr=CYsw)N-^Hy1IM(lIeGj9c7siG{#GR-h~MlDxwDiCl0}wL=Pz0wv!B9P`JLU09EgX8?XbLRgMs{zGq2RX z#!QFMO!>o@U*w8ca{kRN0pIWCrRBCkIo1A8HtkE4w>I?Q=9VNLQds zjZXAbXg=o&$y`F)3tR3c;l(+5Le(@q_6Ho3HD)3eR3&u@1b@{%Q{KONy;4G4ge`OY zE28TYpUrO|e(nhC<@o7nS;Z%cYSo=62lf97H*lg9>0EKN|23^Z#B-p3ufF&6lKSsQ zv>@q3@5pk#dbI!Ny^JD#DyGK$*Xv`5q5a}*ivd~>w=W>Wz0(_Pgs*ZGz&>{`LO4DR zy)Qq`dq(mY=`n(}-MHv`rKeES7b`@piz4&aF2@V3@6M0nhWEb22~D8p&Q(1*Y)|nY zRcbkti7&IwT-E*G+Y4_##Iffo=BnJTO+r%2N*REFx$3o#%qRZg;l$tX_QmfnY-*JN zgs(*vgEcu_NTA=0)BKj_wO#K;}z_aDZec-|#R0s*Uj+KA)03#X`nA z_BFX*9-u{Vw^(Sq)8#5H>WTH$JPN%8_{jz>ImvVb*VPrJejo@V4Ls4Oo{E)^BeN@j z@3|g-Xy>vgrJ8GQ%0oC>9-fC!19oLh0kw2!e?1C3gpvv*K%1gKi@L#{Mz?Vw)+;ey z!ve~@u|E6-O-6)3Upu?UOdfA_U2wD^J?|q-U{)%+FS#wzb?N(|-evf=1iBv-pc}bg z8tSvf!~1OID4_m%pKS^l05$a_e)cq^S9~_XP3%Mgaj+r1;Ij#wGS<0)E%e^+q%V2D z@7O*0dj)GU53AA>SN0c-DSAVf#$-GfjD(HtlkHCS22%|xgE?LISYHkCPXVTkvqyRg z^pl5i(phq&P*gh01ljgTH~n0y)&n>+--h|KBk;3(DVvo)Mx5>V>2R-!K_lC~DjxMB z{$2vaG_q?(CX2q-o8tEX7mn-U)Sh6=`lwwrv4gcLP#rsSPI~e%eF_;d@!e;2O^W(^ zqM<$U*Of1_(9ZU4+Uew0oRj_|{>!0$0mK4)7tdu`BuMuKF#@|RZ&;5qiNbX}1G0CD zINfvH$=!{vIS@Nb;WynMI6+VsRH0AsYuFV&%K!H<*;@88Wth%^YqqH1BnhGTqt;XS zFHLi3vCNRjC6WVjR&AhB}nsrEJxh9t6Hx}lXxpr zG?t!bwg{mjtc~fGK%RQ4p0r!B6p97Wx7t)Pv1`_QGu@J(m_^YaLz;JrD=gCNv|D$2 zpWla6{lvn}RuvMMN4=Lv<;sl2IUhR>U|7~!Xryzx2xGic!-56GanAQJ|E_f#V;r|z z&ekTPlGQv4ZLbs&5!VXaEzTY$I30TKkJJu7A1^2r)JiXkLV-IMhZemY^s99-J@&gm zkvxKJ;W)zDOQQ7Hn>p*nLZG#z%l7XO2S{OG^4eNVx|gV>)YBY3fyAmf*ImMZvsw5s zj)laY&Py=4kf1J%l_L7KyhsjEj_6}!rf8&OoY{a8uRisftWhJgCa(R8FMgR@x57y# zNT~ZtpI-w{k8@DItUF&nD+{BHDppc^ zMGws%Y^XDJE9CgWNXZ6O8M1#--JrZZk3!s}YIV1flI?=Dreg-L>AnitBXB61o383g zPzb^Wij$f=1I;UF0O8BW24SzawD4XssGYE}cB~ZRx*`_>aeA#uQ-P0=-F3C?*<4oh zp3pS%{ZB|q5?3;V77(cGIFYWY6352_|>;t_?_WbZy%NyieE=jAnN4s zg~Kr^_*CvV{cfId0yEY~jiaDN>y5QXNHk;oN%HDd@LV5V%`hnn8^6I$pZzhSB-gOlSn~H`byhXg46V3lery_gD$S^4#6FW8WWC@O z2M%OR4l?&I=LVr^if&P`0W6T#0K{M^^HUw2Zfg-WH8T`pqrH;>Fe>S2p=kLvZb-ji z#>BA#*F^&8x|^jb#nNM`a|PzH>f37Rynwvzki!e$&Xfq;xjOJ=Mk$zTq?%Ozhb4bN zy*Nj;S>2M@H{&E3tB#-O{P)gR`HLif2@}Ie9h81K@kF_ON(vb#Z#%Bg$+O7#sZP#Z z*3TG+P}NAGl;oRHqHe|Jaz>HdcATfv51g;kOElm0Gl~SVR8rE9<2H853^8*tI!@7P zA4kMM*~@uS<3D38>Ow~9j{@^VZeyp-m_VR9qvOvC+0R~LsPwkZ{e@H1lhO)LpWV%t zgtDgSZ(l(#ktd}hlRo?Bc)jAOly8XkiN*xco+^M`SHZ7P^^SA7p>rqx-RBc@^yR!N z4_~0N{!s()jS1>0qo1Dmyn4D%Ki!Ni4wd|xr^5VpXU~UEEATUjcFTNDnF&=HW6wxX zP5kwo6y~j$=qk;RrcXWfW6V0?*Kwp;S~5|1;}mHTqnF`ZPGrVq&2Jl@+WNL}X%9&* z4ai;ZBBQK(k#Sic?tUkgt&-K6W4PitM~ppUU;_#s4#)4v%^wCI&e*B%#8+|cB$bGh zA>1Gu5106jJD*;)Rp?;P5qu<-%^U{tbGcI~V#Y}_={jbK2r7N{-Jeixzf(VTOi@oi z)lY}Uswc6IBV`EELN6)nxb)dOzp9>=>2GO`*ZcP9CO8^w|&3QcwN*>C4UP>3RLs z`X1U&gSn^l(?y3s5^&U)dx#f8nTFGW+-%%a53vVgDG!x`fJ9Gp#5?YgEcO|V+ z^fx{Ba@LWkc3j1ADm!o}+Fr8M>_c48|7B%xqzuMH5MgxO&L?6|;O5=z$rfP%hIiCa zHejPn!15MgXf5MBvjxdz=u5R3OL^fPY`d}`P+`kY0}rQ`CG!vMe9XGR*-4r%@Hr>lZW3UL?F4Dsvzx8Ksd+Y{tHAWAW-$2K5!it}kl-6eY!a z9OxfJ4MR?oMgApkl;39pKH>Y@*d&Jr{r*+&3)>$P>*i#pc*2{>!E%PH{YDh@;?MSP z9$rrDsz&!>${1t2mx)7Y)RQp9rwo`~bCrtQ7{|HAzWARpywA^PHZiCo%9iT}F`Zv; zh2A1OF5QBiha3?nmQV4;K7HS508w@LVY%%7OHMSpz4od@#gQ%33TN8DVL2HPhGbU*6iE-y9Y>=-0z=oU}h-r{gss+kEW;k+F!!ct&Z&^nlKd*U(|2n?nR|; zQ(6Bbir;;=)VZkCX)0@MjFW4+GgeY|380J|j<+9h*UD(RouV7BCVQr? zT)yKdpsqR|=&hRqC!J^3hmXgI{phOKyU3&MMm&puln@$;>Er&knDQ|oIVr-(Rm&-B zs)#pcVg-)wv~3>#;e+LkZUczU2Gr!KG{W|=EXp1>EFWdJg@IVHys#s@K%q;0;_S)Vgj7w%Zf!QW28dV!>YAIRQ!b8Co<(vOt zwv&-47=O3m#Pd^k;En9=b$9zcgBT%Z@Ri|(hH5c$2k|4hjD_OC{&_Bee_t^0)RGXZSo zE&A>s8snRJR^TR?65+H}B)U)7KZ&-tni&oQ=QNb%##5-mPx+>@s~l?bIK}x?FM*ME znvx<8!Mu>`WlvNf8>xk~sQ|W|gw^IWKQR<<1AZWkc9txPo@pFAS4VJC)QH_53#nCR za#+-!M{QSg7&sdqP}LiUr;9qk3^^G>y(r#H}wNo#-JTff8J+Z2!0Zi#`5L zbRCSJZM`ahjol~N)p6ie9QwT!*7k2o(_~uvKE1@j0cK|$QbTqDZK;-Fo7#{6E_#dZ zgPEaZuiw=8naOWev%kC;ssb3vN5VtXWSgv)Eo|&zPdcX2Icg;vp1{MG5%Zb#0=V4U zq$?0)N>_2_%{aI263w0?vPU^g<~y|x^C)Mj({UlCE2No8S?TdJ~z(1~<-qxWbb1J&|U z#NEZpT{*qpBAFKBFU|dd&<3NUj-us2bY8?cn&+3)6j=KXU)0=0HW~}o?ml8{+U2gf zK~GR4^+USPMrsq(1e6mr_BlDwYC*>vm}!dQ z&Ab>Yx!a9(n`8{DvJR(jZ>Rx)Slu#djPI&XHw*@gVIebU^CemVq86$wV{Pe#!<)Mu8uOW7!zY z@*aWRiK01G%^Xcx!lHW2@M7j`quU{rO7X-I_d#iZ={_iW08zqc39qIYWDfI$Eo){+ zU#VDRrk7%xhq21@3#{@|Su8jXVxAjopAc+7)zfK1_oL77Li`Kb2GHZ zSo3!t;Lfij_;`Uk&$H&~*@Lj=obwFl&IQ!{s#K|=HPt1Yc+rB?yyW|Shl`*@P;n3K zm*l4N&A(HzWFpU{qSL4-Qk89N-Oj|6Gf!PvQ|lYM2havN^J#pxRrS?PE4j^>Bev6c z3h1QB5{tRTv|9TbRckW;B4v;05RU~z&dir#Y?#y2b6A)#)7frx$Vo}^uz|nWZASmE z1tDzr9^D`g{i~s;bb7ID)H($XjCEfI>7wpJS+GO~5EUMraUI6|!{2{^`JbO>{y}D# z|NMG9VhRei)4!CPmkI)XE~9pc0EQ77Ez^yC~K|qjDV1zN+lxjjj_vm_w;O z7xojXKE@qqm`}X{c;Nm;ZKj)gOm)t1PNZ)E3ds zW-$h*U8zxhA{#|pcWf`fsgCKtNmu?qG(nZ)Z54l^ia;frej8oqelibFdySWN(lOGW z!MlG(pM{W)@N>cOlF(;C2?)}Omit95toRGGBC%4q&d&?ga4$kq!Oj8he7PsqQDO={ zR171%s7YWOAiUymA%$Y?m5`zbbZwM4oSM%U+S^CXLeK;P>8wWg=3BU(1NAl5J_TtU zG2QYagj9+z#-@Anq7FrI$tuKlru)EMiqOJA&j5Jz$RM-_j5T+YN9f-KA+)__)dA>V zfzZy$6WU&@>KQEtf&6QIay&5IrD!Z;%#oAB1%fy=XsjJa`47@4U;kx#KjMEvk=hR4 zQPpqY#i@tdsEU(t~vUIDN61 z`XN90zQ_|>aiXCNNuagm$?X#HIP_Ng?~?DI=e%jG{U*gRU-BxHCbAw0rX`knTF_&x zQ=a2ceqjYXp3nu^phc_|#Ne9uu4_f-X+EGItJJ$giXHTiPcr8zb4qMEy69_z{WEE8K#w%cWXlU~u2TsExJ50l4S zO4962)Fu?Ji}DmL3b6W1l+K=w;$}tHncH^(A|a{=4=5eRO{bJkQcFwSEXi z$TRZ&zZdzf0-OGlWMKuik&@+TRG*3UmhQ7#y@vKkj+49`e*uOh<}Y(9-cmazY`I){&oIeTo)APi2TKCp?9x!P0Q*4LBVmwS)QG=-%^)P$LYJ z;va5w^WG99y)%D`yucdS{g|8-oZblg!kN*HRHGPr94m;a@_6M9>hASqf!5&`wBFdX z;#_}Sdc_PM-mXBEw$h=JWv4M%3MXr(&mWAP8Ih^jy1jqA8o$=9oKjd_R-iicZ2Vw- zdP$WyPv!s7()ev8>*b4VrdPnV8V@}iNumDP7i*4Gzf(i-bnL*Mjt6l-h3w37?nwz< z{Ug7MjUAfYXojBsaYJ}SFa6gN3#)dQ0 zcO*Z`yvqvyM%D1_o0(vAd=b3N#1`KtS`AvV@-U6`SycxSn&k1lsdbwOpk}%$)tC4+ zPM3_gTl;90%}U44Iob0UhJYdTx7ZnpX~xxW3(g?m!o!#N@6dR|*Z9lGvjx>h zP*=g@0UD6|EQC#R!Xr;1r^rw$3)z{SQ)KQ{=1yczjnvN^@@H%p9BCS}K|Uj0vE6c! z1384AZ*0w?>pw121kg0x$(H zlpP^3W>gD9s)g-aw9`z6b*)9W(0413N?0F)j+zgvY5EX)Ek5%>#u=eAVEZ1VFs&Y< z`HyJpnxwF9bKEsMrE8m7FDRSi&U*$1bz|=>q~%5V9Czb03GU^caFAx=8Zm5KFO5~M zR;wfK1(gwE;ux!iqqN)~N=KaEI{C&X0tXNNc}V^<BoO8tfUi)cTOfI$1pt|$Lr-~T|}IT2&RUwZk8MceSKSHIjp zRj9vF>L>p(>hGq%RDQK*V-ye}H|+LG@#|68siC-lQvAn&VkJdnu9MN=pD*{Ve2K{; z<0&f-(Rf`JKuL=j&J!>CU~lGX$h=+`CL@+RQ=XYuM1WwvtI4&dH^G{Y>p-l1c2!1=40*|e&~NEn|of7p5u_%k^Y>2Ee8v^8DzjgblV*{mqKJa zJ2b!Y`T(M-vzWvleGvy{O4(SQsien#PU&2Z%R42TYiBy8XXMY$)VJtsr|gFHZT(_> z?G%X_WXOC*d_*vgR&Q)W{O} z+sAGeLNg5)QB7@*=sFne7b!;B@ zLe_IE3x;WE6%>q7{$p2>6I~@VDha<%g{Rv?!>sqH$_NsOI)0b^^HXar#hHF`J~ zSTc$SGG;Bwd>K>3-CV-@V#`GjHsc)CXrw+Vrht!{Cfn{L6;IJm?Waot;c9_jZ4GmE zu+PS(NfKvN)P}oCx2%$U|A3;pCkaC+2Y?t2I_JNa6Tc|Nz4Dg0=e^2wP+XRa$8^n) zj5sezzHY-<%Y5C;e|mUlqK#NOr!%0(^*`#)_*$g|T|q7SXruFfqk}HS3eK(F!c1*0 zX8xh-0bbI6Kxej>s?8Nu0H|U!?}wGvo-Wcl|$Ib?wwYq1M+vVb!(Oa?^Gu+1R~QQycW@QzXOFmwe$prXhTR zodhDZX=5LiNN>C;#1<+gxtd5S-R#=r;fcn&Z_%obM={JG7yo>jq!1#xqn|3c8f)8m zsClD*rsal9B2Y4jL(wwmh@xXw=xNi4KIXVmfa^+TGql4pqCL!H_P8z6zENvAs!+U~ z*qG&-6fjV9^=~CW-aM2v#8QCc4wD9*LQS~z5FutYKu(wRRNB8Gaet+NWOPV45N|Py zl>)*oJj-@VIeFL7bS0!hstmL>)^_uC#yZKE>SPQN_R-oI+tiC+aBHkRmvl4ss~4iD zucGTdr?8(YNT9VCI^GLh}^TD(q(`m;P($djhGHwdZ98hCA_FdxUXi%AHzAf^ji`3|$rc3Ve0@7f&L3{32 z?UDPT>T?nuh4%cQP#_)e+af%K*P zblPg}@@fBDr~PB0T-o4nksqD*tYK-dCavOU-Rp&1xu(Sm>NeWOom)dYjLu1no0Ses zAQZjPsR*=xhq{-w3co~Yio$UbDaBewoDRwTGklEryH&yqc~1#XNWzG-)vS8V!icc* z_wrf_{hP|C3;j>-BVHM2FjVAo>eB&JC5-A96A%{Spy#DAs;1?<%-4E{+&ho*Ef8^b zMyj@1Xa;ni!ho7p3a-_UlLCLj9PYdnsOrgDDBn1BF}H52M`6A9Q+S_A3XPDlbLy67 zl0u;6LHX~7gl3CLqjNz!DI|O7@_Z(e4rP)D+%ymqWkH27Z%w) zFOMZEu;y=&s0aTqY3~9aRdp`>XD0&$2u#qZK~o!Rv>8DO3P&PQXD54y2_zB(6_nak zJsx(oEovel6o)3!>~6Q>srG1(ZSnM+9{aba)@oDlXNE{F;00n;G+v^jW{fC`hHy*1 z-@EpnnFQLe-}C%=G_&@)U*6k#*Sp>&?~20#BY3mg<82kv`!|Nb^K^a9v^cW+5_dzY z7ffZk7xJN=1@-ueln?irN0krv%}kYNs?z1{)fYXgf-te)PZbxaPZgIBr9V)^ zi1k$*RXEl+BUMyrYpSSxB+g+Ns^}KJGJv4Wqbf+I^uby@7!n*!RU;pXPr>_iHGR*L zb@UvlO8WjQRfW);R2A}(5P!+uS}@vmM^z9d_S#f&AiT<=OLw2{@`p)xeU=^N_ zIIpJQBb|Mxq^gnlR5kLEIE`u)KKc3p9iJ@v6CNQ}&ft$*jBOmspcgQ&fHun>MZ_P` z5Xg>GjPBjzh9%LR)WT0vZIE=h-NWuhF%2=qRqsZ8#H! zMTtc7A%Y=Z6~!{u{)DSPXtU>wELSaFo5JlCcu0KClQwUgqiXs@iIP&H7;8H*?kcQy zE3V;DSCrLr*Iu(~B84(KDz0J3qO_>>&PPW2FF0a9#x7|@FY*0t*e^<7>sN6*T&XqW zWQwg-{Zx^`e&yABg#G;0i&sY+)x~P}x@&k-FDlvWFYscDA>J!1Frr{5!=_F3SoG?R zlB2ZZnj8PbWov>Nb7!oo>i;h}pI4Q6QzT`*X>p`CjZI|a$?`f)I@T;^=OfzdpR3l_ zi@8mv&ACnF+fr4`pA*xK;M_>{FW7W4ss810uT?b!=`?S3{NMW>{K)|1rSWOiqxuki zqBUu=@utvHJJ zb;X9=cfY=Gkjw0G#!#Z~`&#KGK4H()FhzIG;rsXPM^~@gw?~;Q&XwO?p>;KP@d{YU z`We{f89;gUd^c}5sb~?e&mD|t+h=yysH=^E?dTD;(jB+%k)yn7+3ZN~Iby_j$Btn0 z%}VyBbK=XHH_X(EC)7=NrGwZY_>@K_rMkrGRb9RZJ~xU&!q@kWIA5>!a0UHADcAlR z#LNBv&`=fc4vad8^v>Ib593a7WD2hUfc|x~El*=NoJIvNAk#?&y1oWoiC!1@!_{oZOPXKRg})5-r^#chdR`qHia2L6{guU*gaM>EYKqj4DX(mWTp zGjf7kbM?SQZrRt8Qlouc6Z(QTO+LxyskZZKv_Sw)pbR+d@~-{zww_%(SY4WE*ah65 zY;T^~weL;t5ZAbYZg~&s7{IhsnlA0Ul{a$)Cfla*c~-?)ZM@DX=zS%w)$$Oup*nsSXi;o=DEh19O3Ow zwGweISux+0m-7N=6JALe`V}}^T4&z$(!Z|zb;Nm0y5T6v*l_DI5pAo)k6SU1F5i;@rS0ap|@) zJK{`kxwn{hjFx8c2WPanXYhk->0r}gmP4MP4z^AWHl09A0#05;X|Sotj}RRvne2P> zr5tokIXRH5!B!2I5)q_-+ng0_s_+Y7L82L2EERuQs-kpu6bLK+R(9eyt6r(vtKA!i zoqOdAtGXP2Vek^3fs+0~_O4WEk>ryA~|;#=!FT-fAN1(oI%@yK@L z`@#5Npo(KydvOjVFW4jp^Egp2!rguy%aq|9%WHx(k`QYIfL5L%@h5O`woD-9n83xk zOv1lVcEki4r9Z$O#&pFg)Ks>Ir)p2g1XSCnSKBwU{-dsFd-Rm1c&$UMihnDEaK=_U z7iBAFIKI9coAijgtge2xZXa0S1}^4pf-w>I4lO3x?VX0hR(dn4R5+My89N(xFK`Xn zRFX|=bIaveMCL{hf-vG&?b!{Y5G-S~K!qnmrnYnx7p} zGT3yTnsk-VF=ritR?Tvdo2)O`bYVL0$U3>*ao?zXatGaS8x%;~Dv5r#zYrY@01ims zb%^-H2P!d%0p~MCP@-putafVfk{k#tB%==kwY=dJv6~eEHRmKgB-c^rvvW+1iv@#| zm{(rVxp_wPy!pYVpU8rXzO#5CAp<=qUw*|XLc;=I5Kd$QijKMYuM}!{IeLp$+0YeT zpSiT5ExJByX~VP8^#N{I1zRh}luZdXtpq;Hj`ftGWq>-!R8AC)TtOqj)=S4gJBX&a z5;=s(kP3s%^-NCmmdvV#|BBv{RoU?C=q*%wfBS|y%7R80k7>CZJu>Ah$F^*^$_tHa z*&y$r5yxU)G#-MebzW;XUgO10Aa0_HiyqL3#??ti{kf{;YTheTB>ooFrJqU7^eWi; zGpU&@o|?9C>oB60>~|zdGLb|<5zD5h^OHIFm!C8&N-$s3j7ma;%h3Gxhl+ z`TQsE(;MD$VwiCV3b;Yg6c*>L{ioxwLdKMc-b}&^Nv@1>n>H}d1C4X zW5Vxr{WTHy`z#Qk>fl9A&P+emRQ+5A{0_O@b>oJdMqwo0@ee&qy-LpwNBgX5``Ya1 zn5c~PxUjA$mY4Y6;Gi4F&nfE0-Oe`@O{+gG;+$3OT$|nRLd-m|%1fXuZYiMvS2Bv3 z1EWfdxk8%1A344xuU6yxPx=upWedHO{}*Wu$0Z&oMqE-v&m*Q>t7i+r6-q^p8^eVf zHm4E$_=tUFc7qt&`jl5mbJC$Jv->f`@}lb-AjT3EY=x8cD+aM)m?N`{hKYD15$n|t z`@1(b4`UGs9gaBn3j1uRZY(d%q;t@GX(rgbTr*r9MVIuwFD<4GL^xmW|1buvWiVDTvs9u_xiCzdgEapH&KEOOgSu< zZx)Ft%}Z@P4Xj&2_m^x79j$VXmo|c}nbq#aBJ_B~kh<9Pazt3zf(#yP-6K=M3|&m` z?UfKSe`2V$oi^BtlC_${>Hbp$pMtH&$m7P+r79puZ@Fw(d%dRg#XPF4Q`0;>LM0;>KR z0;>Lt2&noO5>WMX7i>iRI_SlgxG;FfpTK(0_BwdiZwd3L)k1aG(Y*`+=l(ZWVbB;% z(E3mEmlgLrY993#bGWATa6P^dw#y9mj+ntiObbvV3)#;`W^;sfuTvA}$v@(Eb(S7F zJiuDw$ys*qjh`W2wl@xCMcik$2wVnl|AfC0XPhDm_tQ7I!0VQv_XY!2aMPBkzS0Zr@ zQb{sw5Qb_c?KJw7oyG^04YrPrxNDAKU#H33wdhlx5b_voQtk{#7;*Ha-<_vD)$_hx z6+)`i7{(>ktApUBB&m*ui~Vhc;AY}!X)Jl4c_h6-_u||wGz-wsL8I^9@C+{mK`Xb7&K|K#2s4bb7`{r)niP zE2%&taQGLd%<$rT_5jd-oV%dpPp`k?2cwNy{2@xI+G6g_y`^_FCkc1r5Od{ckkQL_ zF5=9MI5)A``4yAOQ`K`agLnQ;WlwW-qf0lHq#eB!2`0>|oQ|s>$M1lZR9t z!VFe>%s`s;{89y*hDc1eUOfIjAYg&(EQq$z%+tG1w2c%6phCVletK>^Bk48o0y2^Gtu>VsznZ~yr?77Q9ZX387b ziC>+!5gqAp?~!OU1sDNq6gNjH()3RPGsu+;5u#wCQ*Rs!{4Jn?9f(_wWvYBbhN|Fm z$nO<&o$2t9plQ79{~TVmT$`ORN%6tC#`$Lj&Q(rX5gw9?0O)c-VUaI>OCZ>KZc4s* zj*~7QinVsd%I%%_xMXxm*mi%U)zIDKN+`yx<{KEdm|J_b2e!4@u5sa5ZuB(Ay!kB& zVBAQM9+XJaYZ(kvh>}FNn>PWI!KQBu(RY8Gjm#|$WmZ&AxibB~56xHAg1UN?3xdNsx7ac$68chP?pHi&Yi}Rgh?F#%?c`B#Hc}ioF z&y;>&H8)F5H)3gZ>Aqm|7lL^*9hb6N0yj1GU={sm9uLu#VAFE7id$&FWV%#B2E-n% zjjTJuh0Isb+bO_!M&=Nrx-3!R8o1R|zw_>0#dn|DI$GNr@u< z2)!o{rv&{N}-6@EY!K_P(e( zu?qe!-I(urEop8i@3k8f|IW{-O2te~)t8(2O*&0A!vw7$m6oa;SFzbO`EabQkQ?As znYy({r!nOj?a{gX04VrHj^cGPV+_jAhWFLZQQZn-uCSs||MU*COaeYxSHbpX(M)9M z?ag)muWaZwzGcrZzp`5w=N*5RtvtWa%0`~}6%x;{CBN-@zLt0!A52G5_(Nj^v_TELvTXrfs#I&HmV#@n~LnjN2Dlw`!qkhf#jr6IGMh9=RpikZ~QnY-ISF_zpBsa z&|8{j3jhRf6IoC?h%C-=ZNi&_ll?hBOZEWi#QQu`{EJVZnHuMG*%2sL3{pB(@*C-r z-IU~h2JMH5~r#7=LrY)(dr|`S?t$UnP>q2>C+SI=CVJ3%Lr&^F+n4 z$93X|^bsn8mo_{nHLQ>tgj);C=*RbYlvE|6mZUq}w48aWaxSQH(C;FwmW*t+!B*ap zM&v$AT?H0&g!arHXw*0KGUNks53 zm&lYsB6A@We0{03UYC5OR9=@1h`#GDmkgri;^%-}8|LSbU5lmpB||{acd5><_4b%R z5&+%sJN8h;jIS)T)!rWJ6oJFsF7nSCFp`Kpm>BfoMI;a|Y|GVm&)@EofI$WmTz$0s zA&8Oqv4SdZiB}7PoJ)QgguT*}e{vH)hGHe5V1;BU^s@jz3EEW?tk@O)vYWQ5++{E< zt`;Y9K@g8si0Jh>i@7Bwe(_Qw?NHwm>H{+6OEAa&vyi5UJ&hO1vlG9fKA`Jo2egdD zuaszV+$stGs~5gP!nb+h3nhGu7d}>Om zaMBaakUcp*QLZ9AXz3`QzIfqcls)CMm=F0?WSL*X|E~6bWxgbRx&M2O|9idvTQ9$A zZp(|M4$gxRm6|UfwN}BVLe)QCnoE=^uutwYq*w$a_3Fi}TSwUMQP}TM*zZx;?@`$A zQP}TM*zZx;?@>6_BS2<9UYXQ1dFL*_;8UrRP)8=x439YqtFHU3E^#7hBZ^%;qS$r@ zl3v;>Qe?*|Wb{>*c0{4GMihEvRG~ao2%(okk0%THBG}*;(!=CD6?0>BM3p@%5ltA~ zzrgFF4`Ojrl5(``Rq3bvw@UGVZX={>UJc4Lf&g3YJ{;{uNK{1!IjqRCp79Q$`v>I~^rs>BT9 zMzB|}gqbX{FSU4NLIcn|Gu679qa#{ZaU)vi1e9|}>AZAUNHYqHQO%zv4UE(tNQc{# zB?g#S4|e?Km1jVyYqL!G5re-+#U0uF8n3eYt423nKljLHo4!lV#C-mw*J%#!ko9#H4FGXGCqEk79*WN0j-?sFYzm zH6;Pu9+mQ;O7VLzDrK8W@#f&vQ7Mm(sO>*cYNq@4Z|T~S3-moQi2Uo_m*qrtB8Raz zkBOeA*K>rBWon&Iv5p7{VtZ0c2*Yhj@DE~()j=%#ea=g-X?TgV(jPT+a#ng(!)DG( z|GD9rU~9QNWHetKsh4y3d7~VD>ROyHIU3b53vr+;^T%+SI#y0!secyF)6&{Sw5II{ z2U}m`3>Z<4KB&GRy0kaS_D2i1JSN*8j^yZvI2$ zhmz>4l=4e7g7PioLC({BLdRLnv2s>3X??B!oY=$4OR~PcIgN%bMnR!S*m~(ZH-85i zk=h%2IV~H$L@5>?mg$p5X}rHPDgU4~H|@`E{R7lacbbYsuZcmRx@y&M2J{LiSp;l?9!&j2E6AY%WRg=@%unvrF!pDaFTFfaT> zy2eT7PNuCSZ86uTy4x^sW{=wM^uL=NLH%y*qg3w`?@_P6Kd5r@iparjNKu-gaj&Ee zl)Np;{ewT^#Qmzwk?(V1&iSZptgD?hEDUF8w+&Lh%DJ%0S(S|rTiKO)$M&McFV>x3 zWiSf+?MT*&e8Z{B)l1*Hxt5u(vM;Q%S0T%)bkBZ<==vFCSQYFqPR_T)abHptzL()+ zPsztZERE6+S}qyBv6tT)|5)YRyIP$F%J}~U}tKIU#Br->E^W8xv3dl~$uPowPh4!)>!~S0GOb)ZH z{1%-Fxl_PI@3>8XLH;Gag7m3{sIr@7?Go1t?9bdavpaDeq13b>H^C^X9Q?+u%1$8Z z5mvyK$Rlhzzx|`swuG>U-`;&8bx;gJ#KJtxm1==l=i&nQr`yR~8m~VeF_yzA3H6GkNTtwWh65XU2= zUVl7e1*P2b^xaGR7at0tpU$H~KkV1(si$~YM@iz@4fFRY1|=pV?z~|-jdg)iF9k9>| z@FC+-+MlcCL(D-+WTCu4skumxY=j|&(7V510|Mg68b*}!?}Ohc3<*q`cUnMzDxjA$btPviHf`wiK2nz>Z=u8+M7fZ6KO^vv##=pU(9 z{>gc(JL%G0k|=i^CT$Zyv^jKjC)K{Kf{1&QOckuIE$L{=6-1DK=-;>sejwcNE*X}v zF`yWB{w3abva#p4jd%&@ z_O~nZ%GcO>vD`yR{!97~d9)CC0T!a`bD@z>(^7QJRT=f16F<38+U3G6e=&Sss`4q< z3ytccijale=-Oo&4Q6zG0U2cieG6%!8KhlBm2JdQIb&-S<9br2cJJ$Md>>0_qKb)9 zZd>FF8%>t)9Ou$}ZqG=Wsa@`pDVcU{UUco!jQSHJjuR$-bj>Ll4U?j4Z%n5H9U>vM zJe`+u68-{_hZ8TIp{Yi`V_H?U}e>Zxj|QA-R#Xz8m| zi`^C$&I~S5%)%16f=DkyBO<;2(X}g8k1Gp7E-9(3(9`K)G{so`8O#sW{em_|+Dj>X zm8FO{_sbI17qIHnS0wB z*Mu`01{>F`%L3jTKIh0?wlIyiWM?+K-+0Rkt>LZ4r#k74*6>Q>EjgLDzSwxn^;$zm z<5MrF$mejGQ)JBD&_bbxM~%5Z5x{DAh`=rh{F>xqlEuWk;a`arv7o^w&_^J6PwWW! zHThmJzSVG70tBAFm3;D=W!eSBam27{(6?`F!FZt}X*e%7$Wx{7eVX%_^an>&(yqGZ zP=zgfqN?xPk03NvF1gzA;3F^T(L)*!%J&{Z zEmzw4=JX+KZo2YU2yst%*H_s1_(xPcyHtT#QwkV;AB6p;hOlu1H_T}N81N_^hhAVNs^@VU#7_40to3~{aMkqH)NnEqp&R$Z6gBV&1OA*w;+xP}m7u6?lx8w6QynN2wi0n?zXOX%T?6#wIKZ&c zqm?CO_zu!$dl+gX-YZtJ>3U4k`c4-niRzEn(>Rz?1<4`r+{YqrRD`;xyP*nF62_so`l?S(K~`U9bVWL~pq#SDI3XVY~-Qu%W-o zjYbJvJF|OZdsD8A8=X4l5E~9iw4^@~^*Vs2W=*P7vs0Za|3{tT1whp&8~FI5HqwiZa5nYvlPf=VZI0sE-Hn^E^v-Ln^qJU|-)%d3 z>du5NiBv&H8bW=)zKt=^(S1STz>9B`u!FruVl3JEzW5XNK#6<_e#DWgx1Z>LU5OQa z0j$XrA<|L=poG2*=c;vSULl;_ry#+mUy>4Rtysw_X<}C-{`OOAaSe4OI$=SLto*I1rAD&y~o(c4iDpmD*+YewQrEH(7@ zs9++IPi)}#Pq!v+AX{`TLdqlnj9q@k%EVH-Bv6%j0R6w|JBRQQI)kCufV7x>I`Qx_xU;v*{J0=j@25oMA+~ZP^t1q+@~w{E8(GY zu_0Y4uUGNM_Aq~SVZ>R%b4zt4)y@i-cqX?w$;YGEa!05-=G^ zu%ZBtjWwKEzpikWxEXp@-UB2r9V&O~T^;}Et z$g+RW=i&6Ch$aK%54)&9r8jz>H*sp~g;*|;eBjxvA{qn@$%~y1FNNHTd{ccdpm}_` zGwb$>tU#0YTJ_cK@xfgB9niGx^e1v3eKA{bDHg!i8RdLyU<$tsKkXAu-NLJ~JNobD z{_tq~OYH0KDB1+TMeI(NO+aU!n}@TH7*8j8i@1gbyaAQnE7i{TSVxPu-(Vfi1Tl ziCetfmdgZ$vpoo2npWe=(@nrfZekw9Z^Zo)Ut1K3IQI+i$~f<1MAi0|YShodY@=%< z@MIA~ottW(AP-pO0c7J)X0T$9Gfof1jnbD^VY446YN3@iHMIV2sZ1{Fr(giuI>5xKkeC^$qS3&(WXE zu&&4;<0Ib~p4t6mbYe})zCyRRZHOnZ72{b$9A*@pVDiG@hS+~>NyQwGRsXU2hD0~7 zofvjruBfH-4WFFITy5AN{pzudhNqLnQSQ<|4G&EU?Ed(7rp8~9t@Lb_VP%moELQgC zjO2b%FmUNV*mNuNhGV??Yq@NTCvDNi2m>F^?Wj=VVn;=hnp!!OXuEc!(z1L%(zrIC zUF(=T)udNsH+0K-;#E#u4)9uCZW20%<#?zfzyD83eFY_RGf>dFW8U}6_W#_AJD0dW zu)^fe?*B0b8#d1RmapZ4}cwelj7;8DbRQbr0YZBor`qhr;C z&`bSHU}M@?XJH|G+<82gAg`FRM+NqgkCg4n@e8|R=$X* zi%Op4>9SwNPX=JrR1~EEPnmIrwUbWBxV0Hs*A+A7(k=FN#W#)~wK{x3pD2)6fwxgc z?GKk~u&kORU6S!8ejr3xtxvlD;#WarY*ae-t0^*ptmo%HF_UsMPXlgu6RCN zur6taOPK`-8*doF_ZR%u@McxMZpT8*rnlk%{~t-vdE7{8t4 zsMM-O?EP4dS8^@z9))Shw%lpU*<5WOkX1|8q5)J7s0#F~2ULr5e=Qx+ZSQN{7~N+^ zqYu*3`$fEjM4aCV=TUvc>^xF!56R(Z6Wx*y-tj<;U)b0?JO+z{hZeB5uohZr+L=eOu1bqbbp{ml&{0y)9NT+ME z7nr+2re)n`NUr*qYVU~kTpGFh;()*UJYDVBQmo3E$zyi8ee{cmX>z~hS6;g3(=*qPYiIa?x=8H>=#7In{P7O+Sz~*h7eU;8#`Jo|@9ORWEZ=udP2-cjncrdvS(a zquHNOd9e`8D!Y?lVc*r00Do<_xV)*(x~6E3UiyfPC3x2@Lh&1)A1zCz+DqNf#aJ^W z{+=8)a~Kssd)EJO=D^Gzd3cbPjRv4L=Um->rAlk7W+11EJR^f)d$h=3idvSU&0qj5 zg%mT~1@fq8agv|eZ&ryvr9|K3m?bDlU3`)}P$XTw6-Jgkxd-)pcpSZ7DfZ-^46^%7 zTgg45Qd6ReJ7yYGrhT4h=*Gbi&lj3w&&!TJt<>YeW>HZ>B|rk@ibQ#AJ(D>7S^iK+ z913$?vA-mF-tUfCCdxfrw&<>LK6(I3nF^+&z)P-rqj(uu0B#7fz@xMRe#rsPR1 zlR=L7=bcxl4+?@!{~ra<-@%{y)0L(;*j&nZlv+!v36L*JAgxF|h4hodl8Cb?HwEw5 zK-7;BPQrmhO3RfCo8_?{q`9}LSD2n;d#ADYaO0rX@B*3&P5?kmoSv6wuX`rT5iJ*4 z?D;tjkBzRU;fdrixW^yc^`%ZCSTuE+>&Fi-&h?_0e$RKBS3$bG z))AE=@(-|*A83Ax-d~Emj@PfL=ofH1RxBq-Hd*w!N)a2pOU_EFoS(^*My~FRIC)!H zSMOc!D!aRXV%cfIrk|2nV{ff-=ZlU>m%|XQZdF7~91$W`nNG!YNN|KGgWoW}VSahV zyP}L=?kQEw;THptidp;?_T}EfMF)madu7{3+P+WP2Hv=D>TDuh+PSWj{{1JxTT4Jm zJ;b~4s%wcl=2XWd?WSP!T7orh1+F!4ibYk4r`Bj0=y&W2ESDP9c%0nC9C8T*OwGq) zF8S|~203+h5i%n7o2dJSkK1@vCL5CDo_!FFvl~HOzO(NJD%{BJX32g91UbrYhQFR% z*WV_}VHC1Ig+x3l%ikA~0!Q#$>g=KqqF%D0W|PE!CUJ5+-Vv6`&qyzyZ*fp1BtiTr zy2qVN&|lP!=teTH=YO(s8*|dXK2BFVqB48(j}nC)(M>8WUoA2P9Z{J@`InUU(0^|D zRLTTHyk8hX9bp7REDC>RZyyXT5iTFXRUCh>K`R;zUC%?r!O-JHQA$PJ`-S%?b!X>Z zBbYmBBA~xFn0wkd@Au3s?|1g_UsU}02l=hx$@;7b2rE#e&Dp{(dHtkyYK1%NSTppB ze2?902G3|Cv`pI@JmaMiDP#8P!80V!vP@FiN2FvCSrw3iuh5e--Z6s3iFt0p1T(Z% z%JlHvOJI2$S(bi4mZklBgUh$+!Q!{~2A9T3TKX1A%Rk*4T=u+Ve1kkwR_xguoU*hx zSo{W=JIS~+SiD*CcFUg_iIG7B*GZucYEb($203@^rH}oQk-5p+|4XhfP6aJfLa~ z=5Bb4RguW50;!h%qFgJb%<2XCi~eKz*@-`eFt3 z#R}?+71S3is4rGfU#y_M*oXQJ&kM?6X)#)V>~0WbP#Rf<5vb@ubDpqlk7S*l1b1ZS zE5%fHGQVSkt?S32V4iA*nDo{wHPbCRNe}f9%yg&E4WR^GpA~GqIe>@3b3^+8_KDiN zy4Ew#oppv8`owgnPuD}An%ZCIxzC)Hfy`irJ~ORdf2MPWy>gFf^?1S6z1+mku5hP+ z%M87brYPIM#UKv2D%^sp_KH3|^yRZxNtxgyuhJ81*x^HuAIP=_E@D9O;cP>D-E<2| z*}}(%C>;3|jjUlW{fcvgV~x-&_R>Q{0-v41X1Pk|xu|fL6>fAk^h(9f-7$UyPI<>k$3d-LffqXoq2U8@7V{d2UWtd@$Rzx@Cy=nldA_ z70;kDR@3TIgQZk_KL*R)s`i`=dWZ2su1SY%eYvf?%jhnr3R15vAZ6<`kc}|$)mfP^*41PAvy|7hT8sI=ZX91LgyF8t zBZCFfj8L4&bIs7cdG0-$ z2PScRk(Y|=anp(|nj+v5$u-^T*%?;X`g~dZ_cL`C+^};EcggGwREnbQG_B!xpXY5( zjrY4JVh?9(9e7;)Muye%;Av85cp}xE^8q>R)%hFRydvF){|CUdx|+CXW4$~#4$Icw zFs_!NM?le^M}_L`}+ zaW0{2+u}nL0qBYL%CCUOLy@_GB5srliA0xHhd+-(!+A8uA{ox_Hu2*;8dV=t4d=;T z6Toum>YU94#$^x~Dd4kAAix*4cFP><);ltZY;KtjnM6bD2cTsdb#1Sy zy{~Kiy7nfs5(KV;hP|xNwBj;@hP|jxaM0Q;vuJ9)+8$l&({@TT{AYN;Z7UuUDcz5c z0GY_f=krHF^(gsiBz&W^hFT2ZYt}|R@N%&E-OLQ%oON zhDea*7MzP5@a@n()6Fa96?ZelO~dIYnf71H-TLD|@VA)bV~w8KJMOt_P2oWqzPQ!MygC?%t6j zK|qtW`JDXr(rkq^xg`MC#6yQS~!k zcNQU|E9@{Gy^yC3>nh!XQ``b5EQC&G%m}>)DLqNIpLeHoJS6k=?MVW7ubR-w(CgOj z7eai7Ue`mLt>KQzK)8b6_~D>#hYb5|J=7L@+uD80>1y8IEMndYW`sUxYVKre)VzgB z(%!0YoALzmE8RRz0N7p@7VNM$sLr}gb0v{tQ@<^Dvn3&x!QeZ!9R^&)enr=|Td|YJ zu}EG2HC1M?4Yt7y*0qB;Zqr05PC3*x0jqoFMdW~b(`crjprLO-(d{;6`w_GtJgKVm z3r}JgjS3r~Fj_ks4IPUGWxCXK91?vRK0VV1UJX<}gFM@Z!@yW_zvdZBkd6kWBanEX zr2lvP3T7tp>ohNfz0_Pn{|LW$`L>7V#Bk%g+1VA>PGA=mX41EOPTwsKT;2GyObkB&-Bnh=rgOU73|YNO@y0IQ@H?@ zyWN~e5ovbW5f9cY;l#jtzW4`UR;N4TWxWA>SxLaXOy>bH-LclWWhV-#hp=zXD+b7+ z4KM&5ns4>|kC}mVQXq_9c)y!B1u!~~4Yi)6-rcX{Np}tgO?z3HaLBNHLa}Xq9o~+$ zP&~9FB*3?84)EA5f9Ls-X7$JyV0MfYvbxk4MZMAmUJE|xF;Mc*OnkrK!y(!=qYw4<5hk+v2=Pj^uhD0gr!@!u(6^m(%yHj-vKEApQyknm_hJ zKqF6J{zGV-;6KC6E6gcata6{+l#ztR(J;tHQ9w{g{W8eA#Z#cIi!v)cc8oYUO%L@W zD4&HW45d9g$_PZ7F+#7!-^;Qiz1D!xaNT;T8v0Z&@C&R%beB;Mt!c z@aj$#Mt?mIp4MMk8i0Nhp0S8$A zMTg2=EE)j_B;+xEG*ClIneOIsK}uf-#7#U-ATH-y0$XqWc6hivP2q&#xlI#PQ7NYb zObD-wMgdbw-+VMY$u-C{Jj~oJgv5iVANlY!ksN;qp7tCCPwIZlQLtpDVCjk!EZy+` z083D|T|Q;|mozkaBn^W#AZdP94h|7FqpXe<`czE86O>F*u~Xf3voq{O=nFISf&2K} z48{^V82=yuT|&H@82=~$5Qq$Cuk7`NJF82?Jy4eZu{VPtjMv^k7~K`$Kc1aZRpWue zhTE##Ww~%y80{2~7A;#YM5x@YJ`vc>V>M$&=uL$3DGR zWOa!!X~k4~iYjPZk?^!mR=+?2fm+OlpL)Z!JV7Vm=8;w|}qSiHX__IXP;llK$aB3T9KjN)qL!1-f?t!t6Weh)&u_S|#$A@9I~qbz z*u&Z?)(BIh5MqUJ1nByN(AJO$WkRzR23p<17QFc{@cDp;vP!T%APfPjy{N3F^o@r9 zU~NX+S2!BKUigRW^Z4IiAGw7&dVP*s9XT)X$aKsLL8f0L^pAvwzq>l<^2&L8eL^)Z z;#)=F=KqW35RAzx$i}$}^QX)1`As9#4Y52{a4P{s#P>O^&}qe@>9Xqu>|Y8h}7;TDG!jX}D76rs4ZaQfn6Vs$qA{ zjNvv@ABZ2lS&1L9S$QvM>zxVUmSeevy;L;bJ65+dj~LIBp1fH9^Q45BNJ)tGccjOc z}F*nY6vx&@2s(7QU9P7pW)MyS^szI!^f!M!8s zHT!XBFup%W)nLyLsMhmfsu%iI^72JC*Fb|!zZQzpI5a-k{2xGh+Qx@jSNa{)5HY6R za8N)j3L6eKB#-tI;fNaI!A&Zus?Pacl#nPRkYvt4A9gm{K11{p1*e#y_t1frpb?Y} zROlf0j6vHIp_K_YsWLg7vpDnxLbEUB9HWesgVJOH(_I#d?LqN?tl zhCNfs%dBb4%Nz4LAle1JPU)ts*x;E|tFii9b*txQm>bL(_>Kn<#sQe^EdLKGWe@nk zNm4rWitgTXqJ*ehrmYcY6jF4%mhtU==ukLQYCD-Lp% z(0imk%W4cPL_??0=Vd{bLcyF8`yIiin6yD$asM%C{OLFne+t1Lup}b*QVZfN9ghZ2 z&;~?`2v&tr+vUlz1X{aqWMJBoN1~Vowdc<#$b!Iw$% z1=E%kv1j!)di6>HXvYndIf4$Lm=?3gk$#flE%R`mol0iv0^g<@dYy~VvpVP9yA+pKzZAcrmp+FeGU!93Y?G!9J&Hd`!uwez3e zYKakV71l?E{&}5=|0w6WLLI|r5bh)sJETpls>wI|#CwXO@{#qpDvW`{nE+wg$tDmJ zHl3!TUQ+eYZs?au#dV?~p7wysi=A(1JIi{msj*$$XJRiHC9^wyiaG5bRgNK;+>Z;r zq~>qC)%EsSG-bs;LZm~c*D}I_@dg^$-6Hxc&0So#y)MBg=Xg@Rr&#f1d!=5PUgXR6 ztfYwgN)F-Jl?6Lb>a@Q^utcT=1KDu+rWRJ0zrBzje}gHzOK&!G>&0_Rfr<8Co?yO zr(0jfSSFgVfh1ixkZN)FPQi#FYN;;@piCccbxS^7`4H>FONy^YX&+^ z3L4tWR!;|AglVV|=a|-;+om(7S70%(y(R;G7ydR!GQ&o4P@5wQLTLskauf>>sRq+~1zKIX;;b&Nz#vlcmFXOBIIAHZ7eQ`T6q-(D*g?M}(BYr8p!K%)8D%=&}m<7C1JeaIHp2z_LPK8By11Gc_-ip=efiw8MFNrWoh}FM}F+N&Fi4Hd@m|zW`1z$r7(e2hKNdg{J{XW_q zv_WMobO)EFnJ!cN#IQd3G3?J8_$58(FzgKJGSD`gy5y|Hv@b1G=UrBhvwsGg9(rp^2GC|j@?s~Ax zv~Sx)2SwPyEHS_ljeF0rl0}3V`{zRQs^`|r{grkA3rmyxh#5urs-0^feATe{r2H{T z{@?IvCnbFP$1PGt|1kB28;HRnX^Q?~7_7vYIsIw+m#;*Bt~iKocos$=t(Qah=8KZI zoQo)zEBn%b_;n)YMj?k6XLBh8;`Ab(SIb4%@Pw2igbEG0UQmIuc$WH_d`LL+$8a;~ zT+jUzw~j*ljA@Xda(6l>jI*XdK#Hf~C6e6(R0K9ETZ;NK0r=ha7TJ_!fr$cx(~Z!p zkk{#kx;kTjVoY0Cl*iJ1d@A$49SLY`24qyX14Z^8BQ$7+J~u*rLMVg)agol=n}$4; z+!yR_W#z|YAOOV&CrK8r?=;PjZ)@N85k34^x*3@0seQcTQeZ}uFj||{Ew@7uZ`{BP zE9Rag@HagJaQRw}MZV}8BPj7QB*=Yywp0sAiVx9}N5>{YZ3;C&^t=-UDj&f?n!q~w z?AK9Bhh8=~Ua`8QT1r`6Q{R%I)fYj>dQSZ_?e7qROLkp5NLP`mWeh^83ehy@s}$m) zS|;&%!KO1Zg>>Zvn*&Nnx~E8BL7-|5kAo=sm2Em_=sZ$^G<1s+lft_5ix`ljJO8?g zAJe%7YIb9t5{}HQSw&_R(iJ=Xb4}-`QOS_?(_Vfwbm{?QBDVc9t-AA*O~kUCz=y0Z z>kkWr_c`AWn_4`yQ|Ox3Ww*&O*!Z zvGU=z_fo7C8HVQjIF~IiO%Yly5+1J*3$!zRFaa^A}8H` z(^B3pM~H%>r`xb%|I9|ww0|0-N)d_Z*e4K26p9=t{TPmB4R1M)9CGc;8n|H_OVpuj zG~KRSTh`)5PY-_=^!(li|~@` zE^AeSn+!SQuG+- z%9cAGh>)unzaN-B4=5h$%8;c`A z^-JLCg@}zvtlSGVg_YAXnCy|m_<>1Gs9|56hgL?^TNnL#~s|1FCIngV4P-{4n{5rxrU$02#%&F3!#)PV?*zj>9D3Cg@p@)uOMg^7S`SO4F^N{s z3wVPDK190gIR@GZU{83NlVOA}5yB7%P3!ZgL@Qx+Er8@IiBLMluKW!F-2+VcrBDp` z0`+w@%w}ABk@}DUP3!dwI|OQz@}P_jHiQ_s95Jv%bZXsOUX^+7)Hv8d7*wN2;!`;X zC#%|Tdmuw5*BAaUMr>a1$$mmvM-gKY&59GkCr0Y8kD$ld8WZj*u-N~;C>xTL{0Ag? z@?R~PB*l~ewxssI5LJPHvIkxbDUJvUmOXH-Q0S$Tgrc%F<~G+?c3Ba0w?Nkp zK}ZWR_-SS5{JJ8jh;spoj6-{Jl0l|yUpg!lp)X*+q}yA`9Wb;3*$;@gSYK2`JLAPK ze33B?wnUx9#7@^4?|4 z8BlHAzJv`{9#kiAG77}dYoSl9SbMRM3#@>w0Wtlty2Y3Wf+;&cp<%C!0S+`ow@qZi zz_+1(&kB&mu0qfRmJdOEkSMHSvCW~S6BK#XdZ9eBp`;3@4C(k1NcvVGMWJrUP(F`= znEAYN8j5Ly@sB5k@I6mV0UP59R`(z~2`iSzI>~8P>~ogd+I=wsilJ>rd1UpBe;oNR zAlmWQ>4dJeA*>#&+I92Ju?Bwlr7y6Wu(r-nCwzp%V{-rH49SfpLf7-Z6q5NWVkH~0 zFSVDkzw6q={szK1K`QbFoZ~hH(_aCWBwvxvHHvgj_V*`Tz*LX~igLT2`_F(>wqw?1 z%?soH(z$CB;AS|#jHw@!?eBj_Rq)3~TS75$2F9IAfIBei@}9!+PfxMSppj z`hk;^O#wc~Aj#8W*cvDia;AN#bHmJiV76qL$DYUxz2H|9qZ%%m(Hjnz+0io}e&_um zxQ|I8(|YSl^gwXdW8y=T?LYTQF?SZ5i(O;k1?ntx_oJxHtbr#*hE+C$*SsX)@R6q; z=vu*WFdt-hJ3(sXSUM9hJQX4;gw3$k)aiB?nkazkLpCKqRNHufw(AW910jk+4%;|2 znJ5*AP_A(sV+*qJO?}eRHoIoI6;l_;uy)d35q-5}9GnaiMCM*E!st^T{S!(yivGz{ z^>Y%nB8-l-M;Un^Zo{W?^bGw|28ig>N6|mP8;RFOtA9t)O7eLmkRxSJgD*Q^)OJ1v z#F}vBWJuZ49R8#vQOICKQ9#)MBdsEGP8Z4roSs`LDl;h&plFt&UhHp0#>`GD33R@yLW(hW0)zG8dpbF*+zq(=A6Qp>EbwP5})2n^HA4&)sqy zP$7hp=~4BV_D*P+eOW%;k+U2tW( zR<`s@z9E90DrVY)h)pDBo~eix3>~SPGYd#0GcnoP;+^-!R)D0$8CKg}?7B<|#lH_v zrVG@W?1kTaKvlcbl$y6og{IwyX^z*DoQo*4Ehfm%k1mmJNEVp8NUdGcYG^YQJ{N== z-t-mrAaR*dh=d%a#P?4ERc7oO9_D-m>BrO(BPcG%7YsjFk=U3bvB6;TKP&0fhg1Rm zDpyw|maX&@!)cBI%!c#lC_k7Kg$?Hig{Jf5CO+A-X6l}ub5?`MtLI?NP-r;+oFN2S z&U~C^$p`Ra>aeWN4DHSOPMr`(lqI@j$4JB4Gt-8nf)UvUn|wLN%|d6v$*L$`ayZ~U z1Qxkom1q7O*AzFjJ zK7?)r;nF{;WbzUUEDoVhJB1C!1sP!(r*s8LP!2Lp?;sOGcdlt8lD?zwIAl(Hu$R{S zAEjpmEwcr?0@KQhXy!X-tHr4Q7C*?@jH}QZ?h=+C`oP-zzvmLLKbQteAc&)TL2tZ% z5rl1cHYXt3I~b_WmX5IZJWF=qT#_ZFzYrE9 zMy(H=CdIWO3Y%8%#T@zQzR9?Cuv(6|w2uwzy-&_3-g@WX6uy0|?Q@?|=C1K!T3l0T zzix0uZ66eyR_ma&jJ>NVyU}eh1Oqe-aZH1qqt*TVALZP03+JgYCmM#8FmIR~NrAnT zvAQSk75Syjid~Mnz`$Th>$bY2Wo^6Y&?p21^B3)t^aC8x5ogC$Y1Y5b~APDWzJCqBFGEXh9vWVAXIf7vgn)k z+vLg8zD8tJLZ?z`M#c#s2zh@;NIG{7q@A(Elo;&gXbxTw&PEmyVl5)>EVf39t`jA~ zwJ)p6mX3=p>xyOpttPvo&|&$4@|Pj7@)#`6=fzf*V@4tQ2PLssctb#FK7@Tb{mMZ# zI>*i{;zB6hVp^$7f9 z#4u55JncPj`g72dTHF7Mgli8Hid_vPK)f0_qZEp{1x;)*2-NIaJ_n**wYuo9m9FL9jJ0VIOYxp8at>24$Ut&EKb_7%U z7R`1b6;HGVR??Ccy9BM8TmZ8BM6PWGabW@vqd?#=(cY@q#&}qQ)$>{_aj&u2=5W^P zK4GUoIayGqeqwb??b;`Z{U>N!w0^5=FS2%$XxC(-AVYAWIcRl!t59tQ1X;w4c`P?h zte$y{5~cz;ncB}gOF|wYDse}b#)48e6$olCfKDBp^ETv9mN{-jPi^aNk>o%*r4wKoe z`C-WX4AV#b(@`nCMd7rcsJ6J41R`K}-Kg3c zqHq{(owZwllQOfiu_Lf{3*b)sMK9ga@zNR}3QSXd6ErO}>;Om{rwXZ&y5S@+G4yWJ zeiD@!`y5UQS$Oev!s(KLWT6onjt@-%Fm?Me$z<4^fqiBT3v^op9%K(I$R1K>j)w)b zQ6z9|+XSFg`p*x7Tuj!yZyO1+IM%9y06>*s+|J4J*jrEzk~8 zGHjYJ(?s7lEZ_~xR48`XDJv4P0X7O)Tf@?mb_BuSu#jmSS;HV=ZGlIfiJh!T)vDx=T3E-K9=d$BE{ zEbT>mKVQ>@CulpMKH6Se=`j%ekz6z?r5h1W*23ASHiTioKhhRG!Zk1rqdvLZ$Fk;d z?JUJ67*8S1mLabMpyWly9D%H4a;RZj85;S?!$9cGy5JZ(o#UgZPaaeaA-lSqHAmp8j{Lc%4daoE5=60E=B{ZTbV%Zz7!}YS8>eo$`beX2 zeYx_8#^p5X?v|^IR!pueT0L?B5}G9!AT@63#N_@X2W(cCcZ(EJWiw}Cud%_)@|wD1 zyz0e0=g1HGvMDMWpP@94w?+a`GVpx?Zfx2Dy8Santvu3HQ+hDi{IDF3{e6EyBlQp1 z-$H+S8Be4`{ScC1pZxNV;2tj|!9hQmJg4_b8BQdS9z_n`C`EuWrInqdXjiS0bj3Vr zBIH9($yUlmn254Zf}rKY#*P8q3m{~fkO(JW1Fi zw_l?m^z2KeaYbXhl?sXh5|O7@qIw9A)9oGVG$YgrGbk3)Hyvs-oii%>oKFjKk~H${ zUa4qFLnz!MluGM^R-sj5-QKgsG6?JNXJX=Y=dX7&py z6#xca_B6Ae@Jf3#K&p|d+1*E|W-;NVn4$H7PokRT1G0Rg2yIZ!IHbi0b%`X5Vm36W z?TLRhDbyL-u6oB2B6MX6XI03v}RU`l5#;F!1h$Ls>|qR zV{)6o)6I5yx>*!zF;6%9qM>zZpK->gy{18?eC4bfxi2U(eaFin_)J@`N&k0MmtG@o zIy)6f@Z957x!)<&o&SjeO1h^l(488BmxOia*-gZnjtP0FsRNt2@?5}`X9oO#*n1oJ zDC;xdJ9lP)2*C-ODr&0fHrr(?tD(}C)Kuq&8JOS%qOBS&Ra#ui?Rwg@hqUNM2%Dtl z?l?&Majov-*}D7mJjZ=I>2_PIUH32nc?pU@tjdcoQL!ckeu)D|G#IFNzk@? z_Bqeu=7~PE^L(VO#Kt=G%jl)f=`2pHJco z^af4A=hmWDsY$Ghx1({X5)^Zl%<4~QCVN%#$>k9$jFD&Nd^|tcj+x8ok7kBdQw^tYpnwln4AQw~^K|`9HcCA6q!4-$=r!eR6vl#95R>T*vdFs z2KqnI%_!MU3dr4}9OaqHQLaK5RKc7o!{d;dR#qS{h}*Dx1{z3(WC*LIGIv~m3+~J5 zaiqg^1(@3>D2vCi;3Vbo9HF+9tbA-5vu(k2e;bah$x=gd8U8ktCmh&Q3zW$72_r9h zl%ZpIM_J6_P+=aADW<|_?PS>($*1syoagHT$8cGR%>^PI$ENaN-@dKH9#n9MQmH#i z?$MpWBJjU+0Jr-Ykh~IfMsj-C?eC0|JiQeLk9!+Ust~LHNt70w*7F^JJT^Mp(YMdk z#R4S=U3&`u68?gBU4OxeRE@xhJ3azYD#uw%L|q06p34U_dC6|Nl;#?bgV7oD&L=iRx6-AOS5ZZA533n3F0&IV7dA}1m#QMO($H!#^3W&w`>GU# zxf9S!&*#fRc>4td84`V8s~}q_Nr(sOH75MP=2B>-6vKAfNN&55ww?tyhCP@q;b|tU zO+?0pE8~8MO_%4g+ZAR&1S`B?vfINVtN2uTiCA>~FO(r{NNG2<2fenoc37@*C9`uZ zBoA&cE5qmXOFDb6a@eOt-vV!y6&mCcZ?h^6{44ORn1X{ubca&WH>%_S9gwfxsyI+S zI+tKogM={BZGD0Bboa{yFI0EnUx6hYCL^hBQ>AxU1qaS9>T;dKsyN_GQ*oe2IwnT+ zzwo+0??jR|>lm#nhm?WZRBw4O#>)D|s-+30#q!^hsumY9N7e_dB2_pOp02XrJup_a z(h$E|DQ%=29r@*A>M3$%zdd8he!p0yx?h7y5RYy%Rfi)P^R>3{7v_^fjHB!WD}Ujy z(WSrfswMSeqyy5+ zJDkgImdN-xesZ+qL-+|GvqxIFksQP{Ch7U5esE3tuzV`dP02hr-N3is)*Oa6Ge`$( z@|{@VB+7(^X}(mfM7zRm3jM861waY)!JnWmSd4R>AVi|n1;bLevUFZ2{;HF{ePxKK zlu1riPAfcep1_$(O-)a9Kl1f#Sb;iGwpnfX&Jw}yuuj5(pMzV-elq@AKZYeF03B1~ z3m#91uw8ZBhr3EIK=$!|XtyTSluF;pKHc1%oq+y)gv~k3oylHL4su7r)11;{F?X^C zbLSaZO9|51Eapxey>i&1#q3C6H+R23nXFU;y7O%J@MH+rl-PRvWq0|js3_}|?M3t! zFp{{I%HHndlQ9G*0{}%K?TNa!6P1yUM+`48rj$AhoUEOhOiB4N*^l0!0+w#( zAEsDD4%CvpEc%}a5IMGph`L`5b)THv5{{MP)^_K-yZhCy2vi`jpIvtrmJO38HAV&aS z=7=2q=JbJp0OsoC0{L}n{DL8f&5&9LNV59I%zy0PdFBIwG#b62_T!nAR1^+G_X@q> z{?8ipg7>;#o6!Br1bq_QXgkzup$kfK&;=zHx}dDtug|!|oE^X` zD)DuNftUtoBDxJ^g6?A&@F1yxN>N|a-Mr75NOTbxi-~hw!)EyLRO9{H2amTYh95oN z*N&~%{lpUmrd<`(u?M=9PzDU1S= zM$-%4Emyz&-SPF?k@i)beaiLkM(r5=J_Y*Z+SlhmBT32?Spu>_6)I6uwQvGRumwF2 zw@@p`9GVu?Gm^(>ypO8iMky0~Tv;k4thiGk#~DPqQ^Uv2KHuttFPIYD=u-qF0k-;3 z^tc>STpmNtz^s5H2WT8F!%w5{kr6{EphQ|!u#BOCfg6X1)A(WLYwg3L(E4Te;6ExQ z>BwNiA&hYU0Sm_hWZiyQ3m&)K+ppz~ylk%XNnPB6$eAmIl`*W9iyP0dH#V4Y?8FD3 zr1Bdlq@KswYmP7H8s-7{)wa=TI|kuXO&Z27Z##yH_kTg0s`1jO8&x}3=taxvIQd?; zRhq!tU-dzHZjhRrK0p0a{Z6D;la}+#EMLj_NH2;dDDetHZ}HIIwX&VkN;myoeRI?6 z9^iwx8$mbCHIC3T6Lz1%Zon+YZJ3Pc6MhteZ5O-#J~#R%Zn#P}bISx?dG={Ac&!`V zEHfUionOfnbXgmcqZshQxiMA&jCk*Wi4iaPD6ZWeZ&>OGb!9Py-Kx5ehinjz*qg3I z6mkC2xc`O?x^c-YmlV#^g;*l4Pk!(HwMDIrhN5ri!(5;&Qkz`GKvEx{&o_#&$naVZxnvR2gzjew#474^y5%c z=B9XuP5A9N2mV!-yT<)Zj2VS8CQ4wU4X*P%tKr$+pozZiSM*I~bjQtcHmGa^$nV7c zEoO)vZ_q>vhHdoCMCwfRZHqTJI{Nk=3SaAl!f(t>+x>6rB>ZOl;>Nx9-RBr3Rh-R;bj(Jxp#((or@+yrgp26|f2piHL+@kcl|0*{ zBr>^m!2X>b&Mkf)x8GR&F5%m6lg!w?rllN)#I+-Kuf$=cfq^-y{cuLfp=o*j(#pS$ z=k1UP_? zM-h;vpZM)KfFHFohU9amf_FDKfIV;G_&fy;;NwOT5#6H46A@XjUxfxuJUh;*(6@qd7bt)nfqt!06e8-w4w$A%~ZouV3`(Ji^1?;d~D7fzdg zn>?Bvpd=cQ#2m6uMlxOyiAPcV{Ml89jIoR;FR`fRw*N;I_@l2(Knwe(z{dg0Cst{*7|N0=&dm@y)F$9d&5i5Q%H$-$x7zH8ISYh=!$zhPEL}LuaC+A{nNq z(pA6`o5lZP`Hh#t;gv3|ff{3kf}1v?AOYhi(%)FBb|8rm>0l&^R+`|j6$FXUU4762 zZU>wqrXsZ0C#xrY#{+CtMNz4O1UMvB54zh;uYu>giH!fwJ zv<0E$>j!e_!YbyCtrN4hlj`FF-m3 z^`M{9nMynkZfvPLMu^~|QFq9dgWi?pf^zurShgHg{9>vx2S>_551VpOs`~F~Lsxq=yAA>6f_P zP75!2e~tJvI+Wwn<5LW)Hsau`I3JFsNVp7Q^!CdIo=2A)wZL$niS_%-O+60E zCVC1a8yBX_0omknZ1x7Yzd0D2{bOKk{0Df*u_!hIvFS$XrtpNyYl~qc9P-~E!=}za z*zEZL2pdrAErfPGo#i|JM7-2C7J@3b4CYaTKhA=QQ`-8{O-tpk1@6c**^^_XzzZd( zUDEF#n8&BQ2_F!j8plf)=XoiS=cOu{YaQ3MW0d8o4IRd-d+*X&l6_CxpHIr{iHjzGus)#l^G$TZbNLl12D$l9XY-(V`tsqTG!LvJ4C}g+j<6# zYzlv0l9Ki%2c6{{x?h-L9(1sC1tSU+ul{)kk1%k9zZQ}w9H{Cf7@`}EFt$|KpR763 z{9gc`Hgz@b|M9TX^qb791bO;c%&3jf$Ep0ipXG=T@UK_sPsT)xy1Rf|EN0HgRFpZPM5_x7cz0xBAm*ZBN&8KxZrl zDnO{E#p9jomBy)_f4Q7Ty*>9%%F)QhWWH@)I5svv<3=`*>W(+2-^$w8AA~T}t4gF2 zi9TxJZsL(>y8$KP%biu#BArO|?y8vma=$5RX3LMOmf9`xe-^(`oy*DO(x+Il-^bhK7BdqiJ6t*SX{`f4r?bB!QIUpIgetDwf zaHQiOb-BofRTm{984D*b)(DQ^1$pK3^TRC{TC^~tTA@*SK~8W_PRm!k$RP%OE$AlJ)$;6W|$6B&v5Eax>g-i11Zx~ z>x2$_g0rUmz}|P-ZM2}DF~ostpEacC?_qu!BUHT3mx9yO#au!3;csc{W;{4?u`y=gj@Q|6O-1Mxv$j*@_ zXy8lijRO@~hF-Qv0#87^BLk=^nP7>D$Af8g(_C(AaTQquQ2fK=fCZe3$FLrOl?zn7ION z#kdrkXtOzEvyMKQUC`ySG{FX~Ef z>e~?8XYSydJGp_Kx?ong@RDwJ^sIep*wFPurIXDBah6_Ym*%H)vd(Ang4r2$Z0EvB z??h(qEZ9N-ATo1%!KR5EH2M~u3yXD7;id^3w5{N@kPZqqv4W!zluqtkh{mC%EJDvO zBRyv1q{ob$^q7&89y4;%V@6JT%*aWP89C{}WvukzI+7mP*Ah-+^)2MVftBaxD647F zEJzKqg8v5`?B?}`(#&qNeR;=V^9{>84mV%RiG$5c+0%G35DJ@^G8d|tHrM=Dp>MU8 z$VKCPGoVoVv|KUGU_uS3>MU=c)9_YyiSEA^=bL^aitL6aHWb+JYhRzPH%t3g6kgS6 zB&13^%Tfd`SFzJ_)dIruc1%81m@6>gcP(Y=`9=v6jxKT>`W}l1sUjv{RTH!MES#NMJ z7r_vroZeiI7HL>8AJInVZIJ18T^zw&o6IkTtu7;Z0;q(z|C2tR$*-QLHbjZ&(>UdH zXNx2deco@XjQbB}IRpzQ7WW@`fUgJzIqX{e6-(?`ZVXFEeU`^HLMnMa!-bUkXDg*v zT*feI%o(sG&G5=o$|BGZ z(#eW+HD#}QP?OK?ngAC-r`}-=rfFM8P7yi}{a=jJgaMt7jYr_5QvQ8YuA0@zFK&2mVM{LsKg8hb=!ESf;$!`-Gjfzt%5~ zQ<6=17GEZC!p8}0b|2^JM<=X(#a`W0 zPlhd@%<3_YH^h#3v_R~LyV@bG;CjG0X_g0+V=R5c(99~MhkTvO_eMJYI|oZi>G&J- zWiZn56kj+riR^(q;TrV=)L#XEwfrsNuO;qxiV68Joa%RqKLKS-k zLd!o6!s&owo(X?b!Y5k3b>I{Ha{WUt&=3A$|ILB3wAY-OKld)qEzmZ{>6@yBr+s=( z{z>X}vPqmuxqGP;##H9vRz4&ZD|1qiY+gd$1GjUi;ogor_{O{?FItW`Y`+7_(?nuV+5G@^WO;d@T(eeZs=ZQ&BO-Auhh?U~)LOtq1IVuGGV@Ds>Hd|W<|&h^pokD_ zosF3*qZqwHzbW}4=6>&rEDc{9~2DSSG6D`6UNTWyv!Talvt0FH>}(l=MCpgv-Wuh zG#}n!n=wkoG&5wfJ2N+daRxBStEP^cSyG{wod@r*CPJXIPPEB_mqX z?9USa&anF16ECHy)zH-eL?3!K`<6mqspY6 z(LKcemnBw5^tA{|oen*_b0J7Nr5ABb!A>l6f*=E9H-os_jr<*otz0VkE2fnERYngJ z(Lma7`4l6CuV7NgOb}Bya4nlvKVUczGhpR4hA#N8>Fcw4_(-CX>>v0~3UaJ{Ok$uw z#OCE2^UldFx`XB)95j)@z)^&aS&!|NL~`cRkRj^Oe}iVNG#7&4wQ*Y6O(6yVcl=LL`pS+xezj0s! zkHW~=y$I<21JxW5_xA!o1oTmYE9Sc4eSm+P&ecbG;4$*Hk+BbCY+WXHx=}KXu$7D@ zfer@MAXjSeVv(-zwQ>o>-@+JM8n7w+mV^dA>jd(3X<@t#d;Gw8$m{Ty-F2{ z60FaXLD!?6kY;&7d?x7LYrwfs!D_*(@p{}phI+bBs09Oo;|G4MF@So|JdGwy?^Uq6 z9_(Z@$p{w+cZLHcXA!XUXr<%0zv>o$#caQ^A$2Js;z-AXRv5}>B4KC-nw-S;D$Pe7 z-J8%Z=|XewV_Y*y9Zy+KpTPo7Cjo$Jn4UK9(EA6EEir%4g|WU`8N?&A~=HbuGUpnUS*G8FFod1Pjl~u0?u=A{}=yS4b%_ zPl1%e-#^Bldyqr&uC1#YjVV{3SyfuscCgiOmWVe7(;!>3XvSTC*~%G_uE}g_I-UO- zFA@<(y1rEbbuZCc&h$aP>fvK!qUaFkLuBWWg3do(?|irW0I)tNHV_@hDp#G623-wq zV84_ehrD8-gQXmhkiL@e(=4ipkdOm* zOF3;)fL0jdW^@qNVSX~sku&Sn%I`cpjHG{-LB+;EQpcVq>bu?s*1rUr;+2r3OW(zX zqa`Ncy`Wc%XBL#X-is#7zPoQK0D>Q5`IQx9Oq*Aya?g(zMW0VMp2*bl>Myze3rgDl zb?^d^xOsv1;|_%-6&DKqkJWNy!3?YomeF%N&tP7{O{B{N)FNHqG(wmqO>x?dG9<1% zA^IRbEmDemZRTY8xNw@n|q~8Gr-)Wg7%?}V@3Q=p-om7{~ z1>6se1l*AcpgORVK32#$|F#rr?)gwt+m`OE=MT>!1k4`0mOBk|5)h3TpC2_3W9&W$9H%z5RMXIDw3qS!y*5f^qqD zwVI0u@9$X7Gy1w#S-Arg+o({M^Qp>3_=2Z7OpUvfWH> zvh9slcyu~{4aU6D9LD(X9L*rAMK_w5X8gJ(Fof{3VB-J6Aj-gL1Zkj)o=!|5R)N+(Pw@b`88f^#c4V5;o*^4mhG>W@OTsaynuAMU_T1#;6W4s^PlOX^bjMgrs3s(lGM{grO1RFspJB z1r|t$8*9>_=u6qRioO+FhB^bWm8|J!geuODcb*fB>XkIrDnG09N~ie_$g?^a9ji~! zkJ5~YwZSzA{56!>0YLeRXRc!*+>k703riw4u}f@^L(X8sRaIzh239jhEEs9PbA^)r zQ+1(p0y~5!XfM-S$2*Dli>*Q<-iY=hyJsFPDZ^9hLRaGT%kQuAcM}G?+Z^I{P6LrF zO1Lj%-#T|yx6^faozeXvnO+``C6$Pp2{F~BPtz)TH1vlujJRa6?uvFbqqCgiywP|h zYhRc073jzEMLf*U6#3NEDdJT1{$r`kgE|>K83!$?bz0K#MSw|~^T)uIDrk*tAO|nf z_5CbI^Xc$NUnCPRvLRk2;vxhZ=~}Bxk-i~r(X1=~4yo)v6$Pi5eh2~tRUc*Ipr*?o zs#LG~{@D(HFz+<$rcH&0vabSV@mI z6&$cEEcKtZ`UOw~(>OD_nIuZ@Y18SCK1#OPpYZ?6y}_LZAMTiU*mV2DRRGNS8v;KM z(R$4}8SN%33pkOs~Z|{Yg?4nBgfD^`7pMwCw*#fr22vkaWOeSU@Oy zN}pA3Y}`Mhqy0PNzyL@SL=yd6Q0pH>V+L@={=P$=3Sd<1&L!aS1*ge%k-GFI<<}~! z2;DlX`K0J#hE#4ddq(BfG$+Zils>0qum#j_EG9GNYvDxbYh+J-5FR;HFiu8cnj3tXwH$lQrWANY zdJa$G81Gp#yy-PzH?*cgdWrM69qEMsjGYFx_LfcJyo;i36eoP-&Oz5X#-+mUg=@9wSV77S^nm&qHuV-QhRlMCc8cxniAj&}>o@iaL`eI1Hk1 zpfgLoF)DN3!c9$OKUDS*eL*^tlZfBv{2Ux=me#^U5g-py-qe|t!$Rwr(a+?tIK{ys zJ%A2YO7IsyQquP`txY8Wp!Ie+7~8VzsP zDK5?DUXM*`GNg4sutSh z`g>5fHJzXo0wHXa>ElzpZGsvQ%7IwkzwrdTUcva<{)PZ(3`P4%y3K@3-RKjRZ{hYn z%k3w4a1wXTqKB9+cl{qq0EqE9V@|;46#PXc1^~j4h>#4Bh@i|;BBF)wkiFSu#Q;z% zk&er(80gbfr#FN>1#1rHcEgnd6?k_t^u{d=+3>GSIWw9bqE8Mqe|_xrWaS3WbX>rQZ5nJj4>xz z+uM*sz%?Az%+Z=c6K0g)sv2*fri;c2ny5J7S~#EC!T(A7Jq_ZdYm z8S;msyM4*3K=mA7UJ0L_z>YM>IVJl>3v0OD6zG$}p5H7nXipv1)9 zaP0b4Hn0OQ4{#2jq6|iSrV+;c@t&EmpF-PbP_?gw;2~3}tA~O;+u;!H^E^=FW=W6m z-u@YWHu=q*?aq5XtFd?V=kwU!TXUI62LF$@_xrT>@Osql5V!*9Rh-TB^L@)ZMsW|24*3p`UoY zX9>F#lQr)D3BhNfw1G{z3-Oq6HYy5ob)^AsDU0r-j-ymt{-Tm|Avrnu%n>pF7@t-= zX2bqp6xsck2v6D^utZ?GZ<})^$2fPI+1?^w_D#}bdd*IWFxUIlKQ{7#Ai$WQg}^A` z)s3qZDOFS~5`?4#qylj%EXHO-e&{gLOA?4p67A^LBo|Djt5QfK#b#IGob?|^dLe|k zF>cyTIhuMBdG>*1HS;{@ZSO4+ltTkrkgp95Wm-PX6Ay^0P)9^NLe(sFo>p5-{JGp0 znBP4jGKStz86;b7W>LUPI2aLw67jeMIhZv7Y#uo~p`IyR0t%YRXF1@I0kIg;;qZW# zL^hcJqM#i0I5>hUfO|be49L=t>+LO|o`iQ))Wahckk4sQ)j0A|O>HSK)Fd8%x=6jq zdPG6UMz6=x4pK6Rv6~M{ap=mX1ip*myH22jN-yqAPDW|FATQ6@7D0E4%lt!-M)xul zL=OUKXZN0lupD~^Wl2NUCbp^-DlE;C(YMBIoW!lB3x?Vt_;A*l zV-5)GtP#;`FF(=SA*viDP!YXncQzP#s&HOi&0~>{KZic?l1fAtNYW3}$F^~BULU*7 z=wq=IDaYtzGeqZw`WUcqm~E1*b8`AvWJ4&@HHqad(AIs;tmFfHEge`I z7U~kaDkEJBV%{zxpJ_q#yV6@<;R`5fFk7U{6nSygKCT+))M`<+GHMnqjeEP_E722GO(Q*q z@}~n|;wMC9(9OJlRhTE7ClcNswKgPh3{>RXG_m#u(=Q0{b>{iPjH{w8=TCOQY#3d% zUwNH^Tud;pf6J#N*AMeFKr@&2**fpKTDO*n~2+lsN-I=`{1}T1H{J2t#`$Rsm;{>(K6u zfsSc+NosOZwcWln?r$_Ak&`4Zxx2yPtzfF6-M$nzbD$YROiJQPKWt?an1G@Yyr=#yOgm}1>BZC8!P?BadoJ0_l3u*zWP~72@`^K~PsROS zD2U6JQkz?f0f0V-e4}>VPz~B1GLI2P84M#yHUF-+Pm|A@i4s{#KxH(IV0?;zpb=a# z5XZ4h?KE###G&pI0dWkRf;bKa#NoW@di^2`XyTw~!a1asp9h3&ur`=Jim`e`2Pn5j zu{Zui>32d(rpz~QvjyQ3$i|Y?E@!(0-|3wt`at8GB8_jffI-DW?Cqus%FxxAU6VQ7 z(9S4PD5a1H^_U~kI!ot_*+w9{J37QXPam@bBlc{(oC0C1V3$-ylU12>CGo(?u+=3e zv99M;Nh!uwQM5ZJ_{XCA@_Pg2QyOI!3N{vLmz97LYGWi|KA&}rKH1NqLH=JV{VkmS z(kWZ2kbzXp-dQE&u2c@;3wuSXWVJj`qvRh6u>@vuj-72Gh;josy&#oM6ITI+ttdEYgMvL8dGz- znmkHGR`DVYW!~c_ah~w_*Ho%m4DZy0848b-MZr_&cdVK(Wo&QYp!w#79|&H!PoLht zFKrO<()(EL_+JBa{cVViXtbN9?NEqBm%|H)2y6Mbk7` z1ZsIQ*ER_sl&XU&2KM8S8ZB}~wQWqGtvbYm87OsV>^ti%DHy}HW#h}nB72O}=>whc z9@EXW^iTJC7HRxwHI}KmfMvjTXzT{@Qc5Xa;bH=@R!yjk?v49@Bp3`7LkT_qt`>;L zstHqkOh|hi1HD%m#iYuheJMtF*Ajc&h0-d$-HNEviKs-o7T1zLV6s0XZ~eP!ITF^o z*#DuFQFFwS;JRhX5#bP-@!a%mv$I7zp#ubi`ZoA?o!~Ss@G0{{x+~l+C4^ni@k^0b zr1JtRof|~m48t5{m5fMd5xo}rGUY=^(=AIc#9uzwSmQI|>FZ1Qmkdoxe-8O5?^Znh zRY-YDJbg1^@o$y1Z7maVL!;qtfZB1d?iP8o-XUVQiNq7$CPU%_3Bc4dwKzXa^HEWC z`Zk;;yU>Y6*x0rZPqzp=N7p+oUH4eJW~O$dC{()M6Q)C{1JHT}zWW_woVd3|q^vGK zG!VI79FXvyF)dA_{fIzOe|jN40Q!}PMaUJM%PM$P1&Z$!{Qs7Wt3aBpJ(Czbc;ADz z+o&bsH!TUz{sf6eXu5`s(R4+@D8Dj(yd$DrZ`hJENe^mJ2|VfBqv%#vmh-ML?Y#Y> zaYMd?qFa#F6W&XPkd+Z&ngC4~o#Rp<-Pe1$EXdNRuM*i9vHgAxJ9Zl3_-jomg$O4x-9>5*=D6md89h>2Qm`ryE1&BjPapG}_9 z8Zu_N8OaYHv)+^#g~;SvrqW*}5N6gI zUs@$ECtL5V>f?8JZIxW4#oiI2ltWZ%C+Ye-UEG-7J_}>6OcT85$Yh(-gWjwZOvL*% zEmH8G1VU+KLvxv0+h7(a{2}zTBKs%`oU~UxpqmQ_e#6z(=9#pz0L;MIAdsV?f$2z=omXA5ZoQ+w?omg}b7+@qtj2N_U|3&Z z>;5F{o!ofMT<`*sw$eR-}S1W=Xk2 zOA4o*3BZ#sL#Sm>x}r*F$qo?Fm-%;SJuxCb6TZaXOK!*lV$)$cnYHFjx66n*o%JEB zFL!9wzDgadOz4UFPSb!A}t7wbw2iim-JEIsomxNrZ~`k%%sB z-bA8&Yp)XhCVe?TXcU!BnAL*Ttdr8Wqf+k?c_RG{TG6$5W_Ov?G(tDH>4ET5WK|Xg z03y5Os883INGzwXp6=}xkuggMPD6a&+oD7hwJ}&jlq^7RHs5K4>L9qXbaNQ$0j3Dg zhQlSHBZvv7SQ)x@`sxail^&H|B~_=37%Jo5lOiLOHZ%#^1l6+qygruNERB&NAwLRo z_JAd`Ck;Tp^D;xs$|A^l5tA-EgVY!-PtlU|O!QgQ98nv_gCVOO@)bMBUGII7ks-SQ zkr}jpHj-TwCB;SSFe?Zts;v1)b=8!QNWXHPe<-@Qv&`Qv63A=Gc#DZVH%!IpC8K)m zcE=oEId(Jc^5i26T)NB()QX@mmnt6b0iMFMl}a9q{Lp*Ev1k-COi0=|I`Y>FE)tT@ zuFzvVnR{MHd+4#-X?Qkv6TTUP`8;+zGJTxO8O4NVHaPeS?>14J<@YPxJW2B1IQVKd zgWzk;3CZl=Rld&<6IlOrDt%i{zHgB&(WzaTds|^I#kWS}yRr*M$@goPMm9`D_Wdx+ zk$g@<=f0tm|1cdQT{r4KV~ew8c{MH*Z@Vz7C& zuIu!8d$yu>FpQWeUe;tfMfXJaW^|>!7$uIwN^?yUSAo^uf!V^&rpSi*Wnx1TZo0lE z5&y$J`G>-8%}hu}p`xA5C0o)Z_`qDj>d7LWIQ zG1|2lzAE7l#959O@e`M|*Z;NW#Bx-|n{s(+XmqXhvTEv?;Ay?X>cHvss^=wv?u7U5 z@>lr=@HH*!7%+&Mp+KiQFi3wmx`U9#2PlN=P|~`kIN>}aABbc)1wHtUzeB|B1)YSM zMsqik?^w#D;{WhbBZ&E%wBT^c_)P z-hz8yyF^zuwnkO3FqlgqOY!_@vDvO*oE7D@T!Dq6GC^Yk_G!0W87#aG>zY~AWZ+2j z8)L#o_E>z%m|FRJaw`JXaHM0AT@ltBs)vfLHIZ8p48`-qLVYH=NHvg5(-Y|%agGz* z1NJk0x%Z^V*BexDFLP~~@$c+LAN*AGNr)IN%^B3P;OryW!8;~`b$v#3hqqf~D?%c1o2`fh*vrScv zQvSLKlmfn~C@|YZoe8>I^Aa=S-diG3^abxtksdy8{EfH^P1{-1o!(IBu%*8N2E`e0 zRn(Ui&0^c14iFu2LnDOq!NY{pZ~f!e3Q&31g%Gjv%XZ=(eJFehNyX4m6`DVAcIY-E z`nfW_$gzu|_HQ$Jphr!bLZI{K_Oe!nKXHn)(D`YDAyUg(8M!mCwBQV}gjpxBH>Tjk zW3F{9%UW;)YY5~{3Zdgq!KX#J#HiS$-5B=Y;%ZoU1)g(`o^1L;>6}nM{jOB^>sQiL8BRvbdFXHk8N-hf{iFrOErK&g^V33rHpGVEj>GyMSm>7_)$U zkUuJEILX=vtQimLN}0y8REFMJ0)4Rl_@s$%;%F5n{G0;&fRNx-ED;;d9SLMAxACh; z*RG{8Z@ckus;tU-6>Uj?DPQOlN-1H^%?&OI>$AvV=EZw%M+LNsujO^bC~Jt< zZ_rVXg|3o-Jp>gBC)Mly3Ehj;XT<4~;LNNfJ2bN4<}#Xy;we@7^KJ}Fp0NSNJw)`2 zy>qL%kK{d%xI)hvQ*&SRjSUN%h->y~k55BgxUPb~QnPktT0X+oH&`yp7i3mWD1w(+ z>LqWz*95B?_YY$LsAC)To>PmYjtN7RyMDqO6mlxOD*Jj^n5qfyd9~s64hwpf%Fa3Xr`>;RoDL&H2^FhLSc=2FW>f> z_PncJ!rswyY12rQlc=amM9UjeYc<@#7OEAOfqEEvS<}^RpyMVz%I1WFxjwtfd4sm| zv|H%W6Jk2aK4%HQJEe4kX~9~d0IBPLUj`~F5}-vd*mkC7GcA?vIz+VZu+DvxL*+W< zP}R8FgJN1Y%vEH;Nb9VCSB>Ri;#O){N&E2f%iZX(J!5Iy1Yo&XD`(J|HTn*`NUt(I zN-L9R);GQ{WjAMv)q^{jnbqpY-WYpPS(JHfH)M5c@GO<=Bm&|bw7dGW>mVIcNe>kW zisHP=UE?w**p<2ze>*;sDD4uB_XaAagMQo-0fJ^06K;D8$D^{-(MT<9dYr zPtX@BPyRoVCPdLGWOW87^3j>DZI@1cOh0X_CTULcAUe(8C#EaBSQ|oKh`y-<*Z=k8{1zy z31jEu&sR0dPI{0{b$H&lhO1yD!Y>cE@}WwenDWELzyOjkuOC=`{K*N>II)aVlpn8W zdHIj}<9~vdB+i*ZjCq_$KKZ+eWYcFEgJzsa zzGRF@p8dZdlHVghk=IDxH6r;ftC5U|S068u**IP#v(buViBpN> z9|t0t-vuHWJ-hKTRfwNsWG4R=RER$=k2ulZMI(DvVgK{6E-y9oP6h3%mdM zc&^?$sK4emW9zTkR9J9*Ia`#?^uhJjGkCi(>q)1?ja@{n-%Sn)ttS6bU;X$8)mJ~t zihGLs>igOJ0rk}t{wg4TYW>C~h4t0SPLr@F6Y>_-+y%m3lVVnKMGA-zsGpfh1DX@W z3UCDl;Q|sT(Z3ZT2%-iyWN?abL0Lh#z{Ux3K?742oeNSaU^PBSC80e%-5hqdBli*G zDXDGv9`mt+YQ+j9^A$=M6)8|$stSpuXu+U@QbEuFW0Mk46OsBoq6M>muV?|*XAmuz zJrXU*g^F#o;H~k|f(R)+MjNdPA_g zf>y3%-Jphzs#(uLz!DgMY0twWO2HbrU%Pd|^Si0(rh?FxtoOE9}m6*?h`zw-LFux{_0dECcFW-4&MHmDs7GX>vbA-GQMOWJydcA z7+3`xNC78V#Z;{0yH;{_gK$4g(fTLt$1{hakL+|jY98wHr`MkXSCVy19qtk5eC=!C)(VLJf-b*$;P~S;a@}Hnk#5-ow z17D-&trYK&chsZ^9`}x!6v5-f8TC}rC(x6q1F-d5-V+9Lhs40ZnP)tw0jihDu)~nf zX9lWR{&cZjS!ap92kC)M-ZzTrsZ2anE*fT!$qx+nkwy*P2Dz?dPeSb~M6lsP$`Py{ zd!Uj8wHid_uT?f+knCaaoy!ztyZCxkmSFGz!h}#flRUxm^PE4DCm8HS(~6D@8k*FN zBhaSt%>Gx)t75+bUL9+nZsUMa{F$ViMrGY7CdI>z`b5ME7M0N|zG>wgnVI5QX+_wq zxTpkq6I77vXpp8}QRG3VtBTw(?^R1kXSKN-LSUd`sMtGfaQUMzDTgab0oD>T0p?2H ze#IBO!=u7s_?qzDh}|W-L565-0ZhVx^(Fj+K%tltP~uA~PWX*DmKuQU1vKKbmj9}? zSc~=Q{P(mv)BEtVumYicj3GJ6rUwy5)n9q05=%iG*iMC5q?$pbvT%8Itf6=I3v3s~Yq_3e9g4U3;?3;PKa)@PQMCEI|^^f!X9VX+k&E5#iIc1>-+ z@Isp|QfLvYS+`9pWM3qGuIgu z%o&d)Ff&4cwr&uBvsp?P5#r++$&AI5KonJ4qC{+#0DML{;W>bw@yrAQfe#rE+G3Az zh{J)i(0TpD;Jt)_pu+>CfuN2!cT};$cGEzTm_ST1N_C{kTQ{LV3#l9A9o8Jxfx<%! z>C0(+0m#-gp`esy94!{g=eE}yN1=KkmjRV{6~q>SdIa@@lC=sY8J8k*_R5$=186)w z2ihV853B?gbCXRG;mpTBx{X>Ew}w_pGT_=Wc|Ebt5(3A|9PizRv%YTU8{Y z&q0}_GtZ8ah(t)11R@Gdm4Xa#mcgs0#H1l$tA%LJW>+UcPC4 z9;|AiU^B{CV`tQboJiNSct!|V8ybL~xiX9@rPMt|3Wh>L;V4v%?ws5T^>s3A58Zu+ z`P$%YviKrn@=r&_m#rGJvdYAjgIIIU*>2*?Es8H=jTO{8z)!-;x(YVR7s~Sc=1O9> z`S3C|IRQe8wDEpB%uzziwWkqFW(s*1U1VtxV5X0p;$`09d~~_bM3>)IWK9{*h0$eN zQuW83mx(B2Qy}@I>p=f1>Sjg+WB1iEdxM6!PckB!Oa&W9$C;O&I?l}Nmdf#~*qZ8u z=nGqmulF@M1E!M$P6GRz^57z%ZD@IRX>_OU&Y6&A=DjG7txkw;WmU?@)}Aoox9UWXIQ#+Nm*%~&2f$1KsKTM^|5{}1)iJJ=8o1K~>_jG#l>Z$nZm&jOH&>GU zFX?D<@>K;OSxIH)5c!lre*UY48Pk9CLHYTI$L8mkC_n$;zbQZeW!HafbbkJ?M&;)p zP-3;~PaKt?@A}`p#mEF@=p$tjk1tEs<}&nMe|`nooI#4dff5idlBB?QQ})ClN1r2S zk5AI)Fd5SdHdO^#`W#5o(@2^=osP>n1l5u~x7b8|PLoSwBvYRaootAkl3ac~XMO~^ z`uzTJ@Y|@U{Lb<_c_}NmEeFS^CeD;kjYNIr=C>QV4e(8?!OO6ocm(jN@lDIC{sZ0= zjT%SQ{}Q}u38KpYqMi!gw9`r@$(jOh&LH*N8mA5@HcG zP8`XjJbu!@f4x3Nib@NRD&f)f`byc8Fh_$bW1Ye?WXkp_)6ZAvFGir<(Fes!mZ*%D zQhigUk7Zsev4X`kb6QZdpU9*pNbefuY^BUoj@g7#z)itEpvHelx)mTg_|0s^J`Mqs zBTSN>b-R);tV})sN#SdHee%1KpU2}V%?^jGO84>6+RA-&PmU=p-IqQZ6zm7(`_>hJ zIy7x`)qa_e;$) zj2UKYQU&|UenYEbJ8oP&6^v3ry}tk52hGL8=b|_%ReS!bxQc3WW%`1T^1pj0$EZpl zIHou8g2rXLigb_>c-!wcn0xZ|0htr$PICkwoAUR8d5ks78b3W5I+H=dGxDSXKm$3J zDUunB{VJd%oE@q~QaMtl3j4KGQ3cF1plS~gRsykbz{C^q79I|Q34)J(75v+GQGKv~ zKb8PsRtvhZO#^>{Ny>$d%FnhYm|-U@S(_#&3w1;VaIFrIV>*L?Gzr@PdqFLW8Z;RN zHf^9H6#GMBb#up{vyMd|{*7f(v0nj;7WyOBzOHG`^JgKx*$NGE9#3PkxH89|q$OYu z{hx?yR{9~hW~G=K{|>ljKY^Y<1lO!Ak85^62adrt)7lDJ8Foi_4yd!RK$%&O7tG16 z#|u`DLN%j_b`I5S!P3;Fw}^-4i8914z>79%iZNdBZrop``A%jYlt0yg?KTq7Iwn5_ zDE@6(z;@3R#5U-nvP!)D3I+gTpKdyeCO3k%dk%p%xe_fNWu|;KwxPWKkSWK>^KYru z8?@+Vz&1VeTRBKbui}l<1+xtYRp*L<$8iu~rnv(R;;zAlm0m62*GR|5<;z(6n5e#h zEk016mVh$Z>w(W0Jz6KrIlPq$Y>ZxbWEEh845;-XV|Z&7QxtTmT3s}#)y08G$1?O9 zrJzJQuHzf*(?IW$-bnkO@{7Zg>PMj7BfWgC_&WQOi?p8Ng1)wv|L%H}Tk&~g3;%UV zt-{T8mq>)qYnQO`YZU@4Q16OdiwoP+RV^;K+er?&mZWY2)j?)&0j_f?K=}Ju{pfW; zbs{iZI6Z18*7!Y5wGjufAmFW2IIz&1-&m8(dDH7Pe&8YJ4ah3&ye(I-G0X`5+`@fL zHa~gGEW#sQN06*jw3;*#1}Y^!%L)`YY4K||E+H_KVmB!uwSL1)&5p{O+HL_`D$?;S zC>~-j6MeG~(RclRGl}AYvOHdKx(Q%i77D=?Z(<>z2VU`sfR5#f(@K$Z#R*~kRIa#L zE=|uxljGI_c{1@X3$M5opYcL~s!FE|%V-Ea+E>Dw-=8JSY(=|hsd7}H}V!z>p-=JAzZWKgsND;^L z8*Ul+0yC4p7kBI(n5wIMV7`>`pWCe4hk5x_z?3MJrFH&m05sPT#u2f{cm^P=Osk~P z=?CIUfn;waycwh)h*{bXgT=18QY zLQ$cgRb|Zpp#Jb#msyj{#SaV^?IiH?Ne>W3!w3LyZUUrdn_dw5hLFJwk^+Q=Q4-x2 zrL6i49Lb_bgL!OJjd5=Fx|(5WGooTXEiEEh!w&7Cnmfn2&vST)Ukp6xmC5uY_Zk+Y zgC{VEtS)^f^zo)=m|&cgNg%lejJ#2AnVcBuMZ1m`_JV*Y%>1%aJ|2$KI9nZIK)H# z3b^I>6t!v@E(HdcY;$1O%52hpPU+esL&+6zTlv{88KBKSV<;*uU#fp^fG-{R&5=Jd zfSQhH8s#jH;iQ;biP9W$!PWEk;3)@p+Fswx1idBNjf1={&A5m0WCw86b!oSxv%Cbn z_|bUOZLcTWZoSD#rTYjXPATPbx=I>&Ed@2ll;6QT{~yiAo79*|1DN7epS4B-{EOD9s^vB=XQ*x>e`G;Z#kw`4xi8wd~@d z1rb)lwQAj(M9b>Q=0yfdBzN1!w3;`A>$ne}WW+VNdeDKtLa?18o{?Uwd5NdLvNGZC ztn;6)_qWh`F`lk#Nv0dBSN|s$HG)LHTh#*6KbFcg@-SN+)Q7tClEX~d>^D}%7EzRj zkX~IsD?5vdPr$=f6d6jT%Qr%^M(HWW3G3E$ulco1uBA!mxJIaR5$|}i`7wM$j$3nZ z&EFO*9kY54?KAe%sQwbUr}b8HzhpWFY6AaOkyx>!Z1tbGnS>fw;$e)15c><$;g_#S zm-elkw=h#tJ)%$Xa9GL@=}odB*x7_-FVJ#$mg>6MGt3YA3-BvhvnSqp<#6-kKukD^ znwQr6w~=QAoWGTsD)cY3z0P9(Pa0D_A!D&31pzk6F}SKOJ)fr~Q-4KCD!sHU?XF~3 zII?cLE|UIs3L>Cm9g15lgyk=l&CpwNSp~2F94P`{p=_?EWcMo*dAC!jq{C#!) z{`$~04fUZL8tXzgETzNK%Ii$l7abm*Es=*xQp+?Gp?RUwKZnW?B2L@Ok>s)-UbZ$8 zc_?|3J#G93vU)1k|4udy&$XMRsS+|Dk}cO+H{ASB>2MWgFAfvi))$G_+)}j)=UZxZ zi65>S2m*7{M+ONn>s-7t?X5I)^T(X7E7K2FCV^}*?zeo?#fle4n%OTSi& z(bYVC;744_JfD`t_@!U1jkNP_tlmz|w&p{cKEyfJM{Wj(iToiuQkkh&^h)w?s`Kga z)^{5H!n8)8=4Fc!NfR8zFe3D*>xaK5W=ysXl{LQriK=l$tgdFDd1uOB@?Jw`z6R8( znb#7z>v|r0;O{xxJWqdmh@WS%ZB|zDIeBj?y<}@cJqqRKft%Ree;cDTP@g-#V0~Kq z`n?(=D_D~L-BtbOr)j$YWv2Z0sw3J0Gse)wPGc(t|x$3Lkn zh?e|~Ff**C^O}+f;RZGqC7oU)5*B94ca-ou(se{9v}%{X(Leg$9uDUoyX1LXD%q*? zNznLWRfGJ_dXf~MxE3v`pkD6CYvD{au zLZy?mLDx&B%lXdRwLZ+Hc&2t?97uXpC;hEP79KMce~-KY zR#)Y=#mpI!?yHjN1=U!UsdUv5zE-BvGmk{tC+nhW8!LNf&aC}fbhCB-$-4JmI8^L! zNjgJJ8j8pU$}i(ZC1@E=y))E(6nx!m@?H^42w|0#niq~2AvX^4H9nyTR1Q=|bt+KR zG0{HI$=$Yt&hoi_#VoRz&TsykWTdNwL3HH6=SAn3)zn$;Pv=K<4Ko?JYcI4>FbH?I zYA|#p0*DcB)h~{1$OphgHU(mi#kHMn8aqZ)V^aOEymXNUE5){>cCZGX97O zhirIr=;g+BT5EXej{QvC%+)JX%Z?^y4W^bIs_TAjqFz;ZlLMySKT^kZf(?FracIfA z4XIFgP6uK-{`sOs>GHQ%&eDumniYoWVTsuey|a#_>z#hPx@hT`TqL8%QKHFSf zr;i{ShRfWx)h*#V|GScVNq-IpZ)1DXZ`Yd9SwWiNkFUE18tP2bRBh#;9+g&2h{GWAZ|aWI2c zpQ&I20yQQH8tK|yv!{8m=Iu3Mf5)NyZSS)ToyNn$)fW^+)}6=KSy|Uy$)8CFoGdMj zyAIcETJu&S4W>sPdNx}G+T3I&8M{BC;U*n=JC}ZGZ%6F z&2HPV;<{zs%{{C!-+Q8{XyLMO=b=YApM8h^G1h*#`5g^gh*yfVU%|679ADvytijFu81q;i}zz)F_AkW65P(G=8}Dv)z5bexvwj<4zx&@H6(^_g+g? zZKCE48ant#Zoj1uA>ESxD|4Ff6GtcA%v{u`jZV#imerH|w+5;u4dDa(QoMP} zZ>(g9X7mpVpQ>&3O~ot!6oM|y<1zwM1IY>LYw~9q4YSkN#u??M+}m%MW5$x< z9k?HXktep#nVmBYp+OyY2_@JPhFRda;Mltjv1R7?(Bf1Z#Qb8lN~6IJk*oyere(rq0&ukjTO7u{tyB?yD(Gg z#v{LQmW%dQhL^{Emh5aORkN%4UkG=g>LFNQOe8XdQ3XM z7Z#{{Z?F5_zPbM0MYVABeE;r}N4bdW_uy~|yKOHyZrfX+u5WJ}s&3xy`nyq7-rKu; zy^iDfI)9t7{kh-Tp%^F5_wOvK<+E9uY2}wN2dw-bua6oVYfEen*iDRQP9Kh^ue>R* zk?v&0Or~$BUO8#2dlQ3D)Q%$-y-C`q`qOTiKLhKRkWm7cZNp_;kV~wbCAAmaY@MIGUH%;L4MLg=u^!rU4sA~_ zpriVt81A-YW@ZdqB#Eo>Y@@&Tf94Ji9h&pX^S8`T79IKs!SA4~e( zhjz2AzXmQmwC4lt!DQM)m3k(*?2Pmcgd7)-N`NCJ}ormZ&*;`$qG9OG(Y~+y8dpXB=hpXaBgrI?P=n z8KY?EQHJW5y|ggX@^sPS%xn`k&(`G%xkN?jpumyR1f!m7e3r(9&SsCTl4(te>M;ISj^=??;l8;r)yQX&l#tv2evLW+uMq}Z@%p-j{wd_4qO`hski}B^8P}EE6{bTi^tI>Vz^CfDwwM6xB z-{Rpef)o;r+!RLbQhuM$Zw(qRz*ucu-S1-YGjJvGnpbXrh-c%m?)7&Lyw5Y>7mNEh zlmjA&66U|aib)cm8-2!&?jRVYBRJ%}?$^SkRQ{4JhqWcrh1a@^KJHz;f~9r#)jSm^ zh#k4}0$!Clr=#N25W?P+|5VC(yWTm5kv{=n#?vLDhPZ#QK6A@?5X4h;58gFv=2=>hXQ)6*@nGwLCZNg`Lw+4b4a>0w@v#cOuL z2_X(s9AX6nVfb~7{dyFrj$l2W@qMO ztG(E^MF3NjMQz>9hw;8*zqXsRZ7l9Z_E)A`CEVTJCpoIJBO6(FDJ!f@Qr!ic#(jhp zWKAm5;G{Cxsqm&jcuS^#xSsP2b2FaF^yh#8#+i0ArmzeiBGp?Dt?{=h&0i>}peJ_m zk7n%;h0Eh~Tw8Y!rziX^#1-7=N$M(M;6{HNp3L$$h?7#Vgcz0}V^NQ~PCgHF^bvp( zbcBxN5aZ44!DaEocw{lFA%;GHN%)22nwEZBhUru0)@+a5^$lLct$Fy82+Eru2?Ar`Iie#+Bo@z5EC-DmzBX;VX4`#Swz! z1{nVh+St|@JUG0DmZ;4~fJcb5m$E-cNAhu0a=xL7CCUO>noL`RUH!zHP$UHox+qJ;{JfP;5|MQb8Cmoia{dIgy@#&)0yzM{f&{XU5sLPUkI4>gPD6pzLBn{ z+ct;enFrQWq163qSlOTP%wK2-NbS)o>t=plgoB8$CcB$jZ&t9Be=_C2gFf0{2LQRh zm+F|B$*U*$likiaPIp^>D|Dz%uUhw;UnRlHUE5tLdTiT-v9pCG{-tJ;p^0-L=~{^< zRJv<7>!xwiFe;kwk+-AL;k7CufF+T;`j|jCR}w@cup%c56fmMKUh>{d`Oh^Asmy(? z=A(QQhZ{k&td|!~-ka?1n~-#NC2`KwDUMZ~%G6b^$4mE6xtwFmUB5ggB1pC!4L2VQ zB5N!~J{#u&c1Ow&O<0 zy8L7`C)S0+Pap%f^Vhp5GaKCRUrb!yk!}7*x2^ATwk7?6{^#&*XnWyZn*S2byu|og zA{`4EGS>G(H%m@G7_+|gn`bve7DNoq$lY00E!txE=I|*$X-vPMEVo%AUx&6_`|Tj>bK?)s7?ExdYnfbD75X z6|})8$nm?_yf72CelP$2s%`w%_J{ezoYmJo+9V3&dzSA;z67(AgrN28%Gk5dK6@fD ztB__-&)>Q#i8u5OBY5sNH={s7Pyb5@Y&aQej3q-qGdE3z?lyPY5=-Jqq9e`lu!2AL z8_J5bKc`D9+h^8Q7E*}-4M0QE*^eZf%}*?$KV#iR%&?(a8~8LqQ9k4PO^8w?*O>HQ zgr9-%T2i%?eKGBumDMYVig5(>Cf|Ee>*JgOS&#O8`4#y^w>+;+kR2wvyc&^Tq^f2o zLo2HqI^kupqz+gGT(JFqXH}~%Kr~%P&UB;C0-HkOuVFoELeJ2ryRaK zG_iXKWcVnElg_>N_eT*NyiBR}%_{?!b<#*OE%d&-t-xu*F(^U2&yz@21>}gN< zN7+N_0X69lk%0ubTivp(`a{Es$z|K?Lh&7_2g9JRxb@JM5< zqX+tSjN39#+Z|G3aR?Y+#K5f(KK06l@&6TpyftneDUy0kg%%K=jqrbEdd-X=6elN8 zYT4F0mJK{V{+6vADYHF%f%z!0ze+FXlWdZ$u`;`%T)Xwu=E~_#Ig$FmeFOtz*omyW zo##)be{6SVZm2X4&`kV~i%`7ooXyUpf5c||^jQBAsfHEUE~_Kdo=zu@oQy2qm540f zhPi?$sjL}jc|NH$xu0^^^xUvNFPxrR>dz}p&n@@om8XmSPq6Z2L@uP=WGTV|uQ z-t{6xE*ZOw^28e*cE{wc&HPXH-UU3W>U#K|$pr!=oB)YN1sODGqKFBC5&_AO37mlh zK`w%#5<()Wki=w$fMN(vqMVL{X=|&s{kOK-7OSoGZ>vbXBm@#br9r%aR7I>h<9GqI zTolRsTl<`uOaQgt`+wf&d%ov;=gG-FXP}yl%8wqN$GZL=@hqf63CN#d-+~_|6CaWs@&_l|4hBI&5>I)!ir%(Yy#F-b=0=wZa zvf_WIgQh?swonrVvCkRa-E%)Dq7RkP@7yqtloqSl(UmGY5W2BNH_W}8K;nyh)kp6r z%qJC7ZQ%?R8ik@Jy-!{lg&7`A_oJ|q{hJ(K!%5hnFinlDf)D2I75-9)sL~O}tl|#5 zu1`-d$sPqDZJMl< z!>R<-mdt+n#r75jB$|Jt5OLa6w1$2k1RD`NSlUlvpu}~hhL%Fv&DJmA8h~=56XH9n z^wWVN^=xj=7+bSDPtw;%`it4RnnAjPIkH%0ztKCV1;%e}+FL(FEFYA#>A(7@?w@-U zooVp1TVWDmyZ8MFgi(FDj%ReEMK{oT?nA@7Dbz;N2ylca%_n31w+XA&jaU3r2kQnd zl{UA2)Z1yCU`yxEl# z!gS96bLqAH34#%ND;=&-iN ze<1)MbvtFR9FwPnPI0pBC^A0w{-JADPLG0D|ADrT?J+7vK8vw$Vk4x;Um`mB;I;?H z(L{8CFtNKs(s9NC-@e|S-U_+d?d&2hKU4QZ`9=sz=Nk+*V;(|4p%8rOuHwLm*WCUa z7V2ygHTH*ki~Q44i}H5V^$%AR`E|KnUalK$0IfrMpD=#Xo*`9Wd4}#E-?>56pM5~j z>(I3+M^PYNAxnz^R3ph(={rByeO9ij1rwUIB%50_KoC~++x3D6(@{?2uSw0l7?JNf=J!XL>C2;uW;H=(85BN z6%wPH0t1`5N>q^AJbiT|9_^V}zqpOUh1`k{6Pi2b>F(x+l8KAdZ_ziaxLcEaU$Jy} z39S;|pgm^;2qGv3!@_h0;|em=ogWpH9Jk)@T?vMS?;1TZqAHyS1>xP0y-CE?@6P{Rms`*KJ>Bl;n zKz6L}`n}{I-TzdB0_U(d zEqrMV{VmVZn+|)1G}K>U^BioSOb-U;GFKeynwzit)l1lz|0&gb9X=^Te&q2chc9fl zl6+tO4xi+gUr5YPy6xH2eyBA^ycAr=J5g@#2{v-4!^OBa?HqzXmOV5SK^+B2QjTh1 z=xripf{oITb569!vRwYhGaE=MAArP$i?Yywun*Bu*Vi>}YN~dZCKFwhtDH$v_SXsq z=XKO1#TTR@oh{F6xcvgw#TSsU;r8LE^6lJ>yM3^BcN?kMl{fZZJS$CeZ!!u7i{yt4 z3g@^2>kNM_lEIhDSLGei?t<6Y3L8H)PIw&+w`bbCjJ60Xi&h%GQIqp?C%=*OE~C_; zHA*1>=f8!ok~y#ZO3cIACodoE1PI3z}R7!mrDJ287%atkwW-j{VBkeq5g3GD^L z?b*VzS+!wfU{0FO1NDU|3LM(8ER;V%}`@vvfWjE*F!MNfp(secPP>b!iCF$91 z47BCx(Rn>O&P2or%;K2O!C(NTB0SnN&(xI%W}ls5D6P33Nc&v(Pp#Gs^e)!oNjD&Y zN!18#!j9G4#FP-je???b!#Gr{pjG{GhKTMkt%DttOg=qHnaJq=Gr9&USv~BFrN6l` z6quv?=O?Mzh0k5WIE>fz(jADB#tuvhdh16H0=m}tU)1W%YnP2RaSu2BGvi}~13ce7 zW-g$Q1v`!+w>BMi8=E}~^wtl1=kAS;U&LGko^%Wqf8G|CHYJE*N)fVu@F(D%^_*t{ zjz)&q!hNm%F&6_MFw5>X68@>9{bzB&PTD)m*%#RxeyWHg0lv*S-II2kljwJK|CtsJ zj)4PR`qgZCs1P*uly7^??>Xko3KC9fzt#31eQ(=eIudRBjNHA=-`d`XMR5N=-Ci;I zJ*mAh=POnwD zY}+3k7pzCU%^8+^dMU>DYZJ)5-a+9N5qUuOUk|W*JvZxY6nim^WobW+4JRkYN=FW| zz^N~e_Et|XSDuRH@b{zd@?Sk;wI7Wpo{qaibX87Br$|?tZ|!Auy; zicR!S#$haf=&3J?uA9Zb9MZiU;21AnAI42e;&yCgrrM%9%rXhF=8S2Boq4a+Xvp&R zt*oHOYIliky*XhuA(@&J)?XAc%t|I1Ks#K<>*UhzUQ9G1#@O6#*_$-?c4L}+@P21g zOQG?mw(c&&A= zc30lv=zMy#dp^xrEDZXvnom{b=8UTL#p2P)2O+7Ry9?d&h|9Qz{o#;0k)p=8nqTuF ziqHuDHLLQprW+&kO(=^y=6Jdb$0_v5H?qq67tMy=Gw2BuD-i4S7Q7_nbvjwN^*}h< zx^+*G-s+&s=^!?(C7Y8^_~v!u9x>O-gj*nbiK1k^h`(E_xTaU@m#}STb`)Pvqtoae z=`p%W^wSOz4~1xQTE1NXrU7|&KmnBo9QLW@O6M*i(->hSx7i~w*=ea6V7Tv zP=F+on8fs~3vUY~PWVFII=KBUHj%_;ar>qeU=-wVdmKOZ++voSIFs*~bDPiY&&+H( zx8W~U>%rNUKbYyL;)U1cdsYbXytI(#Vdj@lZ0V;7Tfum z7yI_TJHFVHCPh?WuE+w6f|SJ5)*ToAm!e06DAkmR_GBz=69Zpc*QGt+N@ju0<%&pE!a@#5DZ%=}D*`Y6hVgNcCTXsnAXywL4#< z#aM}oESmR{m+kF?!8QHK+0=rRr#1dcN-5o2#6iuRqQL0u-K`(SvmdU<580I{wH2gx zh_Gr4Em{jwNRw{2P4yS$Bz5hgc&%|bWkUwD*@xDe zUKThKSCW!5bW(!Ke$YxP>mDnqcMNL`4#xl~q_nVGMhw|+im^Xc5L0O?m4^RR-t0S? z?`g-{OSA_00wA#JviF8;Jmmc;b}ake>)I79I{4QcBQ@rG&IUqHItk=J80+gu&aPd} zJwa&e?jP#Y8pXP!D1OZP1UsiLd)8Wvy>|L7)C(q>;z`$){`_Rn6i9jScZ`!w!N0?u z(EHv3)q}z^DT0b&11U}tO!vETl7jb(m=j1zC4#M);9B!>7>|(6M!{mxLtHcR#T=7h z#0(i%qrOiT`iJzPOeCyy-S`A7$}-G(;|<6n4dkf*| zr`MVaNet^vP!17fUl`7t#8$WW9JIph;c%o7{0!xVe_Dd<@rmmxCJ9tTTGMcZ3rVKu zeWCd-7hL;?-v=B;fn}ZU7X%2wD;fQR*yv9xvhOdlzvny3_j}^BMo@3l?h;^qN12J& zs+)YRNw~N>yR#_X4h0q&pBEX0oz4xy@`GzdxHIdkdDNfyN}TGwb4#GRBR$pIll%ZB-h(_4q_T&;Hb=S3Pg*3{h+J7+*QNL>AW? z&j%doe^M12A>BVGsQZgMUH*g&XV+`tN2BE{9E<`Is%{pB9Jr&CmOD2jNMA5qP_ol{ zzdgR-C@l&;C;UI}i<-Tm%fONEXp*;<{nkD-7|VxNPK~+OY!~zuHg0ok`X(KWfDW|Y z){>hdR#HUh6RKoi)XexyBqKS+gTP5Sm6lQ}pC~#1TPQn_((hp*cNFiP(qX~Ps4QH5 zDUN*`z$or>=+uJDHc`-FQim#}p!gw^P>E39`M(u}70}777-l2|Ye_=%Qlf)5b8j(e z@#P9$KUgTK)zW=PS0@p#Nkl*`h*+ejZ;?mVKuUoQ!;j7vioa9BnD>7#CG_$g?K0Xt z*^DPm=}(N^U1{y2dOu9%_ku_`Mb`B4@%Q%~) zZ=gB+C^7eAJ@+d;_mDnplb-jMXQ-T_JJJc>Qlvg3@r<6;>Kk6Z!SQN24m$OXms!w; zcPf0%i7+NKB|AXbJrv)S-dAAo52>T!qSXq_*^TC{EB$LH(K17|YK@Q&U>5F^R*TF4 z>)XvR+0C9Ovn--cA+v=jP6CN?7G3UXET#|?oOmt;OTsb##jB3QFJK3K5^OCUiJx*O z$fga4xFzYho8+nR0Jr((?a{9EJEfRF%Ib#%*q`#ymHuwN-L_E*K_mii#06XCk=0+A zL1BLq5CVmeR^lXXl{QLIr05@W{PqbbB3kMeO$ZRw)=z-#zynf&M7#TAz?r}hYB23H zCM3$crv1d`zWQuGg5W}_$0w(0M+?^w_VI7x)yu9<@FzMI%fIdfR>r*F!uz^e6Mn27 zU>mjxKT*Z{x&6B!fU*_uOR&mjt4M1Uu^xT0Vg;T@Rf4WpPb&YXl;fE{0n^VGZ$72S zm<_&gZ3IH83kW^esuu!X=muyi%FiYYk^CJK?vY@i$#fL>*8CKyEh7IhRVt-O!v+`ZoPb zaAq$`OrI48X&{QdYIJ&s>nMaA5K8&4gv>_sN^l#jqf9|Uw0#kUfQ-)}*%02dN|*|a z8A6t#!0q=VbsuJEPJ?Y;WAjB+^$V#hE-W+|iK%lJu2M!`{; zePwSjJ7^RfX9LOMVO!}~@N5W(%IQ$=CY=*wjiOyOzOwKul29P!_f*@JzUnHwEi|9E z8y!Gx%IgvSHvpLy>x)+0V03jk)*LG+nBveHIofPfq^#ZTlUpHY%?D}O6iItV)lF2S z?8#PS>@A3p@PEyT5QxJhVNaGtzKZFXOjPtGiaxZ)d!pvKpX44k4S6E;Yf_>jT7!bb8uu$m zG596DCi91ycw@+QF^NLEdlKsmiQ7yZ97g6lgp3T|SMeV66r>=id;c#uj)^HU%(B{= zBmJBB#jlZ&#>RPib%@of92@csLi+OLM-yMqHlomL$Surp%zg>-zVOf?vdig-V_rr0 zAjk2d}>zwQ27i$_5?*mL3Ls!{$@(kELgx}@Sih9U*JXa_HIlCu{w#5(C-i*`Ew7O+4~A7RN0#){}MC*$9ieOc0R_gL*4nb~- z)t^M{Q;>)UNDZGx@Wr;3=q2g1n{J3%9}DV&tfwga9YLM{xn9k%m!>Wc3TRo}2m4xe zzo^@fh%<~n;lG(UOY=``nsDh7TW19>n|JaeZ+YPc$QVq^{Hg>{uB0gt7HkJtTSs@ou)jbMD|Ow{E64` zF88o(VM|&4B4dW$-IxI)pH-4g%5(vP7PomO7;sm-1qD*ZDnOqeBY-CMlPUr!nGzU7 zzWG{$g4C|`&v_kF<_n;wEBv6@fBwX`NoTx7y;?W*tNx>?J-q8mzg88W{o3^lQU*ziBq{3_F;yXGvWSZ`l{;wWBFNqKb6Yh%4(#x3$Erg4X;?tKry9o%;$ zp7=`WP?~TL;(K_jKk)!D5Net#p(F8a9tF8Fn%c+~;<+pR2}%5Rb1=+s3I8NI9|iZy z^ZnNB)7(6BhCV?|>|{lkQFE5QCZwKxeQf$A>Q23_`$*4j)rp)pzbCmhD;Q$pPJU+o z(?#WjqBElHWX0wd6m3`Y@w2vt)XvMX!G&k2M(8oc3I4{CT5>zcLSB_2IND4*Ha4v^ ziuCi`#;bcT+VjCL-re{1?!%kyo^uXwPS6_f1Vzk1NvsE5@!aRW8cr{7=9TyANHnoT z54Sa-EAsy`lYk9M^zbfD9Ers(7g9qJHoJk8FJ_>W63IcqUTky*hdC7Z^V$w?&i7mx zDN}@_jcqT2^goDvCbc8oQw^N*!Sd!vGU-5L6RzD>W5D?FRryG09w^+R?@5fvT@>q0 z@?VpgH!G`t;Ni^<@A*tnnQVTnO^)-=%EXk`n8hBhFt2X;k=Mb8riyN?XM%`4*+XBP zFW&0pHi(n;*XG)Q!P;vsDT9D19Og*tHj?F|Qs9 zik=C{z#De@KDCGcrsN;upLI}n@O|c200_)rsxamzE1yo58bevIbxamBvMyz7Mn!<8 z@~g~J_`_CyUGh&)_I{|=iOmuI=~RP!hw(agA2c};Q$reDkSy(G)nZf4El94q_hWUD6RWG|IFQ$J`0BSExr@e0lQ^}&^gDoui zRJ&#+*PqQBv&9D)xiN24i_Ph?qd>Ja{7d9*#!J&SCl)2rdJmKe%@%UFhiw?gB}IXm zoHl;nf%!0BJxb`yMvSY^?gBgqidPc1?^wL|BX{7Mcs+Z2@DR{Y+~%=ulHGZvO_+=) zRTU_OvClKp9)8k!xGmpvRy3CJLF_NO`%~(7bM$wu$v-iFit3sjF8?)HwO^McatAv0 zt!R6l*eXd~uq0PNKhx8%+;^LU>2NcZ(|Fw0IknbaoYce}$T zx~ii^+57aL>#ZMO#dd{{vvb*#!P@(6s%!T_m%`63V$U)# zwTqO~lCl4d(9e@#st5g0+WH31O?sft-roBXcixw^m(t;%L67}~9M_P(DDOk>Co!2~ z$Z^rh#YOfDZeS8x8HaWMh|oWvA>qK;W*rxYA4Ge*aqgTsbB=t>UF*@I*_$xs51mIk zlRnnx>&6MKQ4Z>&oB%FIsFeFCJqeGru|Qn&l`K28CL#Qo=4$IMQaL;9?NhpPVgO$q z4yEv>SwFG|LJNf$ORE1d9)VmM?*oAL-Z`Qs35gCqTHne0BaRIN!7|*@cdUv-&o2Ls zsoGERmhmQ9a9hbinU)Tv-SUuY`*QVUPzE<`u_Cnr!?QPB@TZF)cxa)=$#*_mm%=?= z!?p%yAe!baf8W<~1@9T*ykA?;<$c?o_fM@cj#30}*=Sj}l&Ted?&hF|in)#$IrGoi z7HAZAr?SfJL8E)81{RzHjlPd<7>Q{rUuW3Oppn^N9nyyl(*qd4%cxA&)`>C#|3+1w zbY_MmkLC;%ax{d)-x6AcuRwPg}!ab47O7=&YuxWyT`16qE6d77-Rv=>;c9SZ)2 z1<7j8g+94RicQNZ7tBGy$Sf^Se3iIA7oyUqJlp3JFO@ z=UZB*HMQ_onx{2B&0Tvugx6*d$uVwDM+_JGo?w#q=R{#r7U>A#?>)NWuvrBia+%$% zGbGzi-SZ1BPUvVTd~QrdQ>9c0RH(qY=7TP*44^5xD=G951B34PhMoznA(?cI+DWnS z6U)DId@IwwVa2F5vO+<&nwf#ea`;K<9ng5F@&DxBFxgY_Iq>$iy;!3GI-sB(Aw{5%)w>Mig z1|M-!t)JPe7{95-$DJD(f41N{3Znj0gp;qz@&92=P795d-g;(kM);8QXLLUW%cOR5 zadWuHc&X6ugtWzHyDP6<3y7xytXB#RXR@MW1b1euR99Y$7WkZdCoZxu;1UsG-6uQ? z{ohAs5rLWxtN45WNj(0y0cTj#r&?pX8a6l~HS>9}xJf#^8TVfo@`40SqRUrts2&e< zzdj#7DwGK~WSSYos~AFR{7`Zo*4D|M0hTw8=Y@b7Kibp1l`grlMGiA`FgCUd?{A{d zWF~0*6sXkn_=Y(>{=+zM%$+JpYaGCBV0xSyO3Vevh93Did%JAlt`qZK!Q(nvRm0Y@JE8h;iYZT`GZm&K zsB_|!_cOtsvf@?zJUZL8eRhKVst;YrzwYq~R+79wX5GEnet>l@ z^lZTrPl-%`D?SVVL80OifRQ!}jfEcKAwutOJB)3HD+yG8(Yu`K9V&icoJT?`%_h=#Kl0x`0!nt~ zeTBUDRbWb7-lo;FEV|robA8{jV(K~o`MkZ5f6z2`^~0m-+m5L1)j zGiYz^w=+q-B?_dK&?tPy)L&+ALVm&!B!VxcA6&vA(bT=!V)2OVzZAI+g(W+jvi2)_ zmN91At4?Q%y9$5ZnZY z1)Lv_z<>vEmMDFB$D~xaKV~5!IE0O6GXonJn}Wlj2+1%%CWEOD?E$a0_5rfSz$=U0 z{{Y@ioY6fQ-cqTax&b+Oh)wbs0;)g1=Xjf?np?mZ=XDvoSimN)MtgfO_(#a|H0_gC zhUPN9V_G;78k8(`u~`(s_1s@y5!*i+4mX&68VB-UTFoN1D04ximljIjER-I}mpjI_ zbP&Cy`pXe~nbWw^>IL1sq&4=YD5vk}H`+aS03{3nMzh+h21e7{f?Ry^QqK6`$Z;b6 zaEA{>mXQUi+FD`bG>PIl^sp!R9Hw=#Sfd_mId`7I_h}He@*)#qDdkdks@@tzqm0dzXQ}U4A9tYIUcW+n8Y`pLD}4JMeRks3pUOG<0u)B8 z?>#NA)%${;_gURps@n$P;W?Guh}HGT>J3!M+&kIc-fN_6$1ficxVB5*8APMc6Zdt8 z*n{5Yz0aK&ti#4>Rw~O3mW(TYAvOD2bHewQH?NtRB;|y5TKrj|L;}|UY@zI~SA_4Nf|W*VO`>CA$%^Tewr&e~F+#Ajy3Zd8>=>C>+uLn9 z&gX>X$>QK%5eJ-yH#KNY57TDnkxil$(3&zy;PmaMJUMb0opUCBs(7<7=Jy=FZS#U7 zC87ZJeEkJrD9+srJUh6(lfAI z^auq2Y*T$pm1GP%pd5ZL*Mbh^XWdBB$kQ$X)K4cn=bk&TYkGC#+Y4VzB zNzznZFaY+(e`Zde%vLwuppIyXr1YT(53*cnwx;ONn}`j$_y7-G17AW3gNR0q)UBkI z;R4NTR*Zwj1_w#ZCSqg>egm1_-i;OoJJ=t>gLAh9&!>CCckx`$GyNVMNJOYcx@cBv zNPN1z7zf#h_M?^%G_pm`P7fw8ya|c_IaA)~aejHtCmX1`$p3hzgC@#u8zM_PUNMBK zi;aH-mydy&+txgyB9x*!ka8yVi_47$vgYo^Db79I07e(L&E2>6aZ9aYOfufzs0t{z zoY0W)m%NoPgjJNEIKBHujy^Y+s%dy!8Se z_Sui@#t9FZ9_O7*Y}G}9M=~4K!-P9m39KTa@S@V31-VmFOO^#y!^?4`hB3c_SY&K!q0P z786YTLb6`Ct2bi?e@5aUk_{`%4hgcn_cBqc7o&dT;XFJNgoe-~>ZID|-ZZOOcw<>h z1zKZ0BA44ghp*+_kVKwmR}kwq-WJR3>fo0`ZSO+i)QI=$&-p$IS^h%B3WUbNWabXf zuKY(;_&Cr0`&0`AEF(4aTQW1h6lIPldoUBwgbQ;hplK#RZKNc+Z^(b&26LZEM0C9| z+3wsZ{qB4rf&b%|daR6v(^`O?cL^!xVPHdpF=$gG*%-=JDjVz}_??TXK1@vqLpe5d4bOR(H zS^zaEe)T<-U4GiiE<{2P)ySA_{+|37o;Lp#NXns6D!=pwP1G7&0ZlqcYrF{>bo#xj zf9|_<2yX~j(N4l{WM4{yQ`sy;OD}l-hwy9$U8kqF=mKpcl{Y8 zVL}QXaofI6EszA^YZ;=!pMFG1&6M;#?R%OsPVJ2Qr89)FA`jf7I^-Gp` zA+aAmZH7IkW*8(H`ja81&zy2NSo+Ii0cM{u*p0VE;HVDn_!pV>un>y2|FqSKe(j{D z{Y#qmYjP?FitFiCr|(1p@=W74Fy;&9jPIk}{Q|f0zG=CGc4OGQ5LPu1G3XPb>%bi6yHhN!`vP-3r_uj>k zcR-=uJ<}t<*A;os9IM{n-}8N@MKt;9WzYUp&6h7GsCPG#kN z(0QbtZtH?lNG@ID4$MhvYLRBI9cVQW3g)9zp))AQs3^5wn?B}6tKXvw{&Te`Ge{mb=2E32C4utCI$Vg+Y8bg1S?vJiVr5QkA z4v)|}-ic$hqDUsRjO_SUQ=Tn2jH=ZaKTPGL^27nLl^-PL_@5hrkK6Zi%{g5oG zw`4X}a6SbbF}0R68U7U2t}v$V#>lAwmUrT1P^2gj7mtV4`CnqrIJxXugdV(ULd)dHifiu5Y2iVB&C&hqeTb6FJZCW%@cyK zy7;kfgh8B4s;^rl5c&~sAm(R>lNhlk=-dZ&Jx)1MV+(Fhl0QYn)3Qy6DQ@Fs_S-q8 z<@D#GVipfG|8N?1yP2^KN#&(Pzn-B?u5q{yvH&6@a!8j|;YcZxCul=kj zd%Mm8Mb1^0zUmIResny1RyV!#akK>Sx0WEYrSXOz@2GR}uZVFOj{JQCx>yvY=_~ zEXLN7RB10dL@Kuh`<{h*M9Z?A%&gfgDC{8}o~Dq`YorkA#SRSRF_+zvfp%>p`jOKl zepV%hw?z^^Ac+Gef6)W?sb&DN3*vSJ`(=W5U8~E!(mcb`{%I7m99*w|TjnO;h2-JgC8`Vy$J0BNcEpRk?6wrF?V1O|Oe=^-hI za%^~e<93GJW^WS3vpBb0yH;dh%94Hf1>D;?BMl@ANSY%_edfnjnefD)r}dPmtqaT3 zs~8SV+qmIF zJ-7Fxgk$|#-w7dVKif2Hle81ThclSmtdJgE7+fi)McnD~X&!U}#KD?Z2Y79lmGWzEMn8(whfP`ytl z5Mt4-HD*~=;ixZbbM7_{kj^d)%WMbYpyja*ZejUnE5Z6aGO9)?h>d3qUC?#f4eJC zVZV)?vk}md^MzDE=;mj_c^-hH=n#=`oG3$R?*(;dVb%-OiWM0-u0B{#LKmTWnLkYZ znzKW=GHeY){Zyh2Na|Sdg7c!S<-2Q%HW*ow}TlqaSBP3#V ze=46B1AU1XOCD`xt9Ew@XrqJDhpCurg%{A(*8#k+y!T{xYVAha18N-3ajwiX?cT?D z6z8&8dZ`?q`vcTP11Kb|Q@eMs4AMr`3M_|3Q6LuoBK~Bd?L;L>$*{WgN0$j7qCMnW zoCz6^d`YCKjT6aO0Uoh!j0Qq;m1R zIheUiPP#nAo6y(D2Be!Ud*rLtv@|<2!Igc)Wwc^TkbNv~XM|D%4ZOB^4P2?F`w30; zV#&%rrODd(Zd$(G%2z+o9Fg^Xae|Sh-J_FIn2Pu}pP{T`72C1HN4drZuVl7SOb366 zBpZve^jyB0bhg|p?-tplZGrQ-p**9%;t&D7;diD{zydg^{(wt+e({03|!b_#|9A((UVzI6$P#0%7OvN_?4f`=fC`cgd^~08*h!` z&=Lgb80r=;VUj~!04NF<2If5Sc4!DNh(5`YU6eV4Y8FVDNA@scazZ~Bky*|+89RA1 zHu`2psFXJ%GRPLd$_~j#RBFDQKH?-NShQ$y8sMhE^{n+r|Rqu_03qf zaa;}6V+>pxBwStEq(Ib-$Cb8IbfihdhBosix;`y}Y_i~(#_oP5C-mZ{(^QWhw%NVO zw8tewu?AKrYsIxrdc@W5uZnAW2gIaB&Ce^@l=uWFWFBy>t&}B178*S@!8f+>f=-2Y zHZtAWfD^379;Af&%d$>PCHBgq2w!ox52Oos@DQQ!&@W_Z z6v?*=zChW=PskU8YDH1OC&(*4Y-UrkbY|0WIs}1pm9U0YtNTX=k9P0H%!1bF=s`>} zeB~T+PI#Cpe*z|4^VF&WNm!bi6$)CjcDU03Yqx)#_r5HJWKsx7+l5HJ6SQrrTTFTojc9b& z2Y|_4yY|E106r58|G}mBxD!21>fi@dXHouaZUxP`_@9fY*BBJyU2GqEIPsWnTMt8&f;GqmQlT~UizFOMC zq2}NV@_l*sQRp^4QDgI9a5~Hk^UOawec$A1joAu@Ef%1zwd^^IU}tgw?yaW9fiqL$5BIUw z?+oF3tgU4Xe-Wkh&`v=TJkg>T>f+qb#Rv$Y>s0-M*H*ie&F~GmybC>uEQwq8;0?)i zT0s2hw(F%+IN^6KE>;ton7nL31OBeS7PAZ&kP8prp{Cz?EkZNe-F8~VU8hXMV*M{Y zEj@0+95Rn}e-r69P!bX~m+CCONh*pq5E*&RKDE}ko0CLmOLAT34^cknDK||}X z6`>C@pnmaXPM_b%2(WtPeSuM}!$Q4d8m)*sltXeiIA{ufOk{+9KnpEUDiqoDK&R)2 zGHWRx)=tA(TaY=|wKnT?qL zongIdb>GNzxY{98VQ4j!2TdQ|0!@nxR14&1K$&_!Uf70AUS;=UADSw)(+SpBM!T? zd6@H~ndZwNa@Gmrgwq%Cs+(Ck6(<+X>{vNdy(ITlInekt#@xb7;XOr|1^+FW%`&6I zb`d!@0H`=Vnb&5Wr&asY4i0W`oECE!(bfAC50*$z+WeT;B_={~U6|>-H-z|_-!x8!_@QrsvljF-@?^3h&skd*D6)E+7(MN~zt>>uZGiUqrF%ptVKk&pogXtc&r z+-Oe^bo%Yi4sMmamM%wRV*vbPLHOy>@35xL4i?{pa;;;`sn#Nyr?#4-j`Mz#tGALjESS)^o2{i;YSq>Mem z!N8+N4FGa9x95I@I;)xZX^Zsuwj$#d88?~>&r*p^6c0rd867f&aFdxhiR-QK3>z3Vp4SU$|n$tN*tT%4KZ z#>*p+I^3)_?ogA3(Ym?=L%2a0|JU}9j1FUWI8nUUifOgpL*dU!NOC{ibnKk^ z0m@em8#-G8Vwy*k<{`&-p#>g=DY~-Y;<@e3zo91}+#JVIe#ny` zGGV^0$Nm*(4Rc%kw{hBoQ{OwCxB0>ne=vTN1=ZxY7FlPcVNnKci!gOp@sfy zMQP#b8^+OW62gubcR0ZWVC8kqCr;xIyy)UVG!$G9%fY7fHYc{4s05hK1jL~YjD04= zwgf-!b;V;&YeG?WiyRI#HW|+2A_nm-XPwI5()n&uAg$5m=fF~nH&+h;957`1ryfVc zKOlTgH^1WKUJpP%6F?ZoBj}j1J;+?~XtTfli4UNz@DG{(Jk+p*Dl&}S#+ZDbtnQ4K zA3Wzp=qr%kI8O#J)AH)WLXIt-3*?Buk(ewc?CwZ(QJyfjlk;~ZUc?*ug@38$AN-m4 z)6XCdxCiO9ZE} z!_vS=`@Y=5>(Ya)(mnZdTK+Hg19vCBOC%4|*%thly!Q{;_HRbnE}oC`tZr@>Anw|T zz9R8);^KJ3*ZR}g1UxBO0?DF~o=P^erFb!rIxhDo-pOm`BJWU&-OhWHUnq{>wacGa zYQFY-CdvO~p{XNLx9Z?5x8g5q{HjeL;JsAk!6uC4%B4iUz`W&4fg|NSUMh&4+(cY+ zh+iW4MePf$^A*MpOd$8cyL~76tR6>W8aI=v6xX+dJ7F%KJA4ybi9rpHt}eOLJDUn5 zqAUFwYD18T@JHj|i_*=zK4RvF?F5pWE))#$p>jjMBOf1p46zjY5DyJ?z6ndEP@^`< zxINkPct?REg^mJ5>TZzvguGQKZA)Q6W|qxai|*nBiLbFkpl5HAif{%ebsgo)fm`(n z4#25v;t(y|FmVT~q_6=$|6K%Lg-=s3^o;PWOzN}x5-_0_Mx}gxA&_``8{IZxGyiEk zooj#)qaXh56w1wW9-$9W>6!gQ=l|{tKnbM$mMkif;5>@&$oX&ot!XF<12Z#li|;Po z&F;3DztEq2C;scVyY1-uUMe(_@010%-Wqn~wR7G9K5rcLq>rmhzT+&uyCrIv1$Sq# zFRo7dTHa3hc6mUz2Zza2ESTQnxm>LwPhLRkK#hV@H$D&kThg9XUii-->W_+Cy5U#& zGG0<-8+?)3RK|K=V_rr_ewsDDd-wQB)Sd{8?GcVW&Bp%yGX zS`v!$HrE|M9KceuJ!5)c#Gl=P!N20eo3$lT`s6L2X1ftiz1K4d{Uh20j7`J+BJ{vF zNX1xz10ct72U)B=(N=8V%9l(NitU}n#wM3xcf*JEyj^v#yNsC_Hf+JL;oo)Zo4V@H zFNCcgce9wG^cIg69*8`s`#w(a_hm9jWFqh$G*)mzG;(rF`4IrepT>;G2z_9hEFT2o zbhv4s)cQ3tP7t7rb^nBpXXv=5F7KJ4?X-O7*Pb!D{|Y8t>hoNMhql9Qc27vTvq8Ta zp@MeLa@wmK{|+XB(w$#>84%qbaw6?FJN6Bhmu8WkBHx6L7Kq>b2Wa{*cU|e54={=z zFzHnm3xV{fuThF`{Q-a4ox!ur9)s@ivx>N&ljv3Y0HYa~zbviw>qLKHvfrKLwExqI$Y;-MukUNw z!?a@$^WOq?Q;VBVI5jfqv2#!q&@<}gvnT}}32UT25tR7y^XktzBwQRQ`Z-^xEKK9v zY6c&C_w66*4vcT`R63t`kd$w)IkR66V_UkX(4WfZvLJ7FV19yg7duy>!ai>m8Uyf~ zaNM~oT$I;Qx7+F4j4Z&%kw~Hye#zNNaoKMyPYa$6W{Oa5^d!4Te@nSe|BU1KXGowR zr!n(*T{zqVRqjypO;PEjG&a@L`6KUWzRMAZT#_+0kYJx0m>ri9PSo>SYtI%c7h%Wc z@9WA-@`TT7@onY1d_(g=@wfQ@g8JSJ{tE2N+V4YJtgXfAA0B=2-QJkDW z@ii^Os7BnqHbb!LE@e(0{Ug2f+BA^%<6L2$jg&z*(+&~jTz=&AGuruA;zv#NcFKp?@ZvXZ~?aqc$nSs21PRzAhtfwM)4%Y!W9q{WFhJ z$x)1p_+W28Pl0p8#lV1Z5j#T=roq9LR;O9RuAsBeCLHllQBmIB<%tNiyMmE6FRb=ZEqf{0F17A+P_=wZMt;%x(vnZqActZ&u_QXdwxA2`wW5%{K;Y)UCS19Y zHG&vLb**-aTS$!$-hZ6t!cYn>naXb8tLVwLBePHV!l^yC&BDHOS4iFj<~v-5o}udT zTvrgdZ_q1@8{^E4W2A-IZy9G;1E}o_m-gIVzR0~REOW@LXB`R!+xg@=7}(io52f&y zVx7KYI62SKQ0YF74@=EWKLn665{siykhEtn=lv+OJ^hbf+1e znCi(VMt=<4tiK;93M>fNd>;;FQf;znjm<Syn#EKcI)^4k%QlyhvrMSgdNoQm@#%br}mP0iITS~sx` z#SrPN1D{_&E%vSWO=N!Ufn3%T$a`lYdirga|3rpo7M?g|SrGgS%xmLF0ftTK$9RxY z-yczo{j<$kq2CaLKRdba)-Rdsli-#o6?u!4e2L7jC`2g)CwGnzGqAYmMw(6SjgJqG z`ia_L|DNy#>wPaPjN~h~p8H$jRaW>0lc@Ahz4d&q6+UgnpE&9LVe2_k ze!KY$3CItsRX_8o`#BQ-pN3n{dAK4r?aAfIK#Be3^U(HUS69nKQ(qwO*z}A37&A(b z5Q)g&*0cPavwA*9oRde=zhXH8k39e1@c%3Z*4T$!*FWyA;i>Uy0|qAaOG-=J9e-x8 zx9n&2{=haksmgY4pUZ8-`krk&zh8>2PjW9?-;{V;a*Ew{ueSQS%+%o%FBouW#DxP_ zIkE;ld*(%HcMiBX{qy8Y&iGBAk!N1oJ11j7V(wYJ5-vMCK7RB$`Ei#Ie$qa6h|8XL z?!Rs0hCX8(@A#qZs$olP6VID&bDTfUHmuJG+wX?IcU}GkMY{9Clq(Ce4vutX551u9 zqRWO(zIgpv`iP8l_a$`$rjGRVpLXfj{fcvr_L-hrl63W`UcGZJdnIwy=ywuEjnNV= zySy}h^cAngjTyTj?()2&_A9P@#6EW1LVMo$;r1&h9JYLuHRiI3SPIPSHzItN}q zV^Tu#%z_clYh1gpm{l0OboS)&*>k6?JpWq#-E*&XKYF%4b^4k5w9K@rMZX*{wfGio z+Vq(z#aBN~{rP=6XO5aT@0!8I^JlFqxNi2_mDsyc>Nw%$%6B)D!n0dZ0U`E9d*OpGe^F=aQ)n}lF3(>FZy80&87cvE?GQbeCZ80 zUQtn=d(97S){1Ufk~jJ0(i@$jA6z(h=`A14Sax&Mw8~}o&#AiQ>KUI^rCwLP?7TS# zs>1Vcy>-ZS-%TY47_H_nb13<2GisrJbDLJ?h26r<}vaxkuf3;T7lXOL_RbemTxdHfBA1 z-WBJ(IB;E`^#kfN2A+vqHTe0%CJAI8!cip|#_~DO# za^FvXcK-uEfAF^tKk~cZ|6%>3fBf&K{`$A4pV{#2#!YRTx3qU`-M0PJU9Y|V#+$qM zytV)Re|_-bN5Rm?hramo--nMJJ@!=;QtKwp9+!|1pU^uo0p!K;iG{fMgv4IGllt^U zGsrLA9{E`rzB3@VEnz_7z+t)0UV~ zOSwusGD>T)ABNT+_LvT*tAF`T*E+7>asB06t}RwP$*o^EzwX)-i8I5Tz29`Da@nk_`Ym`ASI<-@KmC80 zf2*d5w0Zj9WeF#`CRx{k`0o2i++R);7kO9x9q%G(a{hxfk+cWmPOU%k?%Tp@@|?b9 z-LWE5$8+`O!n(;eluHn@noBZwk)VqNT_ixOV(TJ77YW3du>2%{9G8@Fx}UsH9w6hm50~%)8Mo3F`Nig!_}DTekEDx~BV`I7 z5uPb!Nx3rqWoJspxs)wqUUQv_W{*xm@RQozHc;-|66!@=ph&z#{dW45z>@bzQ&}3#-5{ z^$UNzkShYOv_W9aq4W%^CC=g%l~ zRMa}^YN{%49^t57T2@k9<|waNVJmjdyUAHpbalZ^1^S%n(@vkrtYDG1yu7T2@+&M{UWn>ZNj1Q{t(plGno*kBA1P77lfq zxU8ho;VD_Pw9J7*prW#ZZN2XTTxwB>X9hH$gBwbXtTOrUT%!Ij<^T8QE1?Gg zlYcc8)gA{_0FdM}DJ|MrR%2;@gwA4fQAjkSdl?W`3weS)kkb>@P-Cs9#1k_vR8K@3 z!rK~esV7P?-F@PLdTyyTsZaXHduso9EvT1Q)OfrlOC2ROH6<$@C8edH%QndzG}R@w zwRFuXaGCuGnJ!&wo8_&oE~`}77YZk;s*XHM%4!%D1qJSFF3-vBrejG`0Zo@J0|z8q zS>_QsnGIP$!7ELA9pyDu%N&Kp zvmE6m6|ezDPz44LV!74*BJ6-AYf>WUR*OKUCkntV#y zY@1P21`qUtma@vl!ewLLNgV|xmC_6k%(qs-yqHb}$;-S;Jrz)w!^=cLwp+a=m7a>* zgn35TqoSi(F{5~KRavd-N>$pj3Pr;XVJzL_*QB)`rO8C%D5cZj{?kuS)iy{%%^eVW zd70Usx{_K)6_p6_!wH1arIS4%hITpW(jR5(dl$ub#Do|1}6sm$y#RT}!QQ}Ouig_1`QQeuu5 z>CY>LkJT_M)X_W{e9|T}fJN5AY^*ue;`>>pGSLrTEXy_Zv-;cWfU=koGh8NdW;TUM zHI>(rU{L$D%T(vod6d$tJuJ zzJJ>Ep1LYY3B!}AR>1x4@(~EsphGgT^7PichH zXEtXw;!vqIoMrGM+SM?UM695L74Jk|DpN?M?XmNPCE4^q&fFf8pCu!T7$agS<$9}4 z1iBUXl3MC281^E&FvZq(Ph|?Em>FQ+X=Z?!xPq$cl{FPNFY!3C3bGxea&j*l;h4Ro zY8k_P%1B31NoCmx#}seH;ws17s-;U8l`Uql+wvTa+{-SRT2gt5WKe(=lz4@;U3nTt zSIdkpJdrM}Dyb2<8K4(2t^_}7Xi|c6an+(ShjYe^+|gF|Ul|eb)Wlo9wB+VmHBv{L z19tR^5hmBAv}NX;EP%|Zyrr_Lu2M?Mu?liz3B#H?**!UXge6WQhbX9fq>t8YW>65F zlEWo3Er52j$Jt8OHF?OD5nf^?i*Uc#G-kzCf*$P5OvPaDDMwmKuR-*ObvfK3sv(+HN~COGpgRQ6&`DnHirzQ zbu*NneJRaRJRS6jh<0+lR(FfsP+GQhDRf;WYd&+0VRl|@fpaQNi3l|INMp0m<`_QO z`(0OLo|35%-UU1p_;-=|GpC8#QN#Yndl>WV-uuL_n{spUkEseZSIz}hH8oyVtV&i8 zdGAW50{X0*pGsPhLzn|=D{5f?9@wF^cxD2x6+yPL)SN}46lRh}w@M^J?zYp^H{8o| zM_^MdV9`nsQnw{G^%zR3!%mZ*zV5jsP)q;XvYTZkY4$R5-|5>KnGnoIk~qpIz1GB~ z2&ATLxv55|gn1$a3}38x?WwDgs95(M^_Ew8;r%_D#wrHPf_Fxm$s8hbqKJ0UWqqyU zIVQ$E6-+r&omta&$v8)^y6+U2vA6TJnvYGB;E7Yy9 z+6o`A!so59(+WSZ!lPE0I>jt!j1^9`!i842#tI*>!mU<#zzQ>TGk?AnR#{<#6+UEz z`>Zg@ZKl7}3Uw=7VTBJ_VT%<8tuS?}RgV?kVuj6C*kXl2D@>hcrMJRrD}2ZbJFU=G zWTrdc3Y}KC&0!mU;qw8GS4Gv5_fSY(9@t?;K-xZVnbR+uy0%(u`Ao2~E}E8J~` z@mHJa&b7i(R_M0Ec~;n9g&VB!s1;_-F!Rr_!a6H#w!#foxYr7gTA^d6nXk|aXINpg z6?R(T=T>;a3eUO5%$H|{bFHw-3fEd;rxm8oGSll;xXKEft#G{+c3R<4E6ks5=4-IR z4OY0%3j5D7-{)B25-WVb3cJ}rgX@cgF%#22Z@cO>f8UAT34f4n$LQ~iguhL^(f0}Q z7v{g_|KUVigRLO?k{j8Zm7naxp7z(0b0GQU@yFxaF8f0J$HcCN{J&J+Q}o;_U%^wg z_g?+tYRA6R&Jmvs{^$Ac588F<=R@CpXkqh=$Cv(c!Na9Lne{}~uWw4)I`(M7=FwmF zduiO)y*sWrvR2=)qS5tNkAK?VZ@+uWGj&Ts)AturABf(9~8f(At$Db}c1M~X@-))6t8B&ef!p~_ds zOD%0tr`9TdMLXrOE%mcCDpu^Fa(?fgy_3Cn_V~5u^z=E;DdG9^|F5;zUi)3|TKoRa zUK(%kU)i2xFi@A*pV#*Fy}M+Hf!d<+7=wVuA!v-kKf<=ZW&0tvWw#+fT4O~l zTaH2NdwR7=-|1^?f%R_wA7LZamHhk9+TV*B-EGj=1$|g%Z;QsrXdHsoCXI{G*oWaj z<0M7^jd#$vhX0PX{-fKcu@YWw)c7Ke4|2Cv<0>@n!ro?$x3S_{wC(y7r2?oAtT>Lb zXpQms@9+uLcK!V`{iAVLrF^7uDH?y`8&2E^f_3y-b#i>B)IA7e)@fK15X2ZzQ%2>`J`~xGQGz)A6)7a zHE!dI_cA=puk5PDsFeS@){EBHHBy(grt!?gxIN<`2oGsPA?pcRqM>FPkNxUvczs-a z&dF_9V;#44wg+>k6s`X3^%n3Z!+ibRRlduv9~G|?BDo@;k|@6Ku$G5k*s$2r%1fj{ zE+=xeUK;7&YN_R){qNk$bGdh1NDS3dS!OKNJ$2;LWwo`(OLX>G=gyrTn>Igs-nrAx zog15a)|qF`og?qwxPSj(6WdKb`le!Df0K3jDdG<(>rhIwsEUXySG(qv)5X-;#=M8T6u0BYSy`vvKOHz!uzh@zyDV7BG9~ASl62f z_t*SY`}b?zx58F^v(Q@3zD-MOK7FGx0n0@@iUa9`tM~6O++0NHmi_xbB;DPgdnZ*+ zsjF(e;gw07x5aNBdD9D%{(bp9(LqyxF)8qutM49s^4f``zjo$4O&8a(;*y6)is^Eb zhnjqt$y`M`{tD*$#7Q^QG{y+1;N@maA6-;7O6-yzS=}q^IZ)5*S9fQ5D7Re~M2td_ zTZ`QMT#+x`YjASaDQD>N{Gn9_uX_DXgKJ)VQ8^S#`zOP@FQ0Lm@`klXE`cMzT_4^6 zr;dJp>uYeuu^(O5e~Kgvr!9Z(j46`dasBxfmrs#x=U%epnT{!P`fc&I=l^C(Wc6cB zpMU7^snPd#z4rEzUzxh*m*@0;xidMHdX2xWH}1IekyqAF9MhWl<*+}WHR1HuJyZXB z$o-@5zH{}<XE&-S%(2@wQe@If5g&Wk3F{KJJUbRkQl6D+_D#|uG(igeX3D@=ybESv;!dZXNl@7VmBVFlSwR3$5I_)WUrGu_? z$d#6`v%ch$_d42_eaD%O{Lqzt&Y8~r&Y8~s*qM&J=uGE!In$9>oaw^r&UE-KXFB<~ zD}9jjd=cK`TpoYSnGW@Hmd|Z=E|+rG@(*0gA91Fmy`1I6?@VVOa+Z&L>P+W4o$1g6 z&UE$@XFAvBOv^{E^q-vR$P>`Z5e zIn&{*oatbbGo3%inNBo1)5%Mm>C_jT=|Y_|9UkgTXI<@;8t3w;%U{v{&gHp*uJmAM zIv#T#Pa+pO(`i>abdhVhD;@v3b9v-qXF7DPb9@HP>qzVPf98}aUkZ&p^W1sIhbm5) za7x&C#T_0ydTeN0XA<-qZQW8#71;eq4ff%D^m z>xTo^OT`Ps1INPy$HN21!vn{|QpZE!bd>1eA%h74LFE7f6 zqJwY@oP>_U^}JlIKqukrK?I$GZwFJ+Y4}4h1FbI={~gR!O`yQ7V7``z-vx`%o$#k1 zp=Eg3|8>xaj>B()73cz-A*i4korTx%B7ZG94WIf2k&Wmuyb^3hr{Gz~h&+#u!&eRC zc|SS{@8X5{PIM>y*AsZqkJgvRPw30xd&?vT*YR?52s#1Z%M0d_=q!9f1?@$L;d{V* zbQ(UK7ol-<2=q}{U zyRrivgx7#~(P{WkyrtNS?u4)7O+^0e$ME2m&HIsy0MZ9@e*2oD4^&>{Gz z)9Dv<9)5`!}Fu~86Ah)!6tMT-ZLBf(K3f`j?BZ)s=tc9 z0N<+q8gofqB(e{kgMapQzTt5nb;1wCu@jwzCoJGyGCBf}S%___;n9omr)v1|OBoO7 z9K7!`#sFGhQGThO@u6klFE@$gRKshp!-wcJeB?^LWQz{LFN3}4JiPUrLc^#N4z40T z1g-oO7^3;`q1R(4It0%EVRRI}<6GE_PQwr0z;}nxS@_${j0bcIUUxGlY8m(k-{xI4 zItLH9mA6UgAbdDjkLHtfBDXO%(8|NXCUhA76?ha~fG=1>8_{w2y*os>qH7# z9&H9RHxR@Si~rEl==UO0XRrg?s&geIFf!hdssEMTg-z z{|7&`P$ygohNBbk2Vf*xekgMH)3hC(hGRL}sO90WK0~`y!?!$7yU;24ffr~CIt!ov zW9&pn;P_A2U$i{@OOQtw;K4r?c@-UkpW9A9qVw>oml&()6#U(v^NpTXY=G;3!Tyd; z!qcxb_|T2%Ug$ewRK%r{Ib|(nlF=gD-rKwxi?liuYNDPQp_@pe^Vqd@Y!(`S5k% zB6JFV0L0N*xX*`-PjnEz4 zCnM1j_&P8ior3pP`(z?oYJ5_=oVK77@R%z}YkBy^t9;Ug&cjz;gZ=0veAKo079D~Y zCb1cvfX7{jpV1NcxRuzC4#Ug9Hgpm`Y!z)mhv4a82RaIW2nuMq-Y5PW7)$6Nd?VP4 zPQkNQ`y}uH{)g*95S@e{1&5(?@HOA|Nl5eIX}8f{bQB)5hW3LS)h3f7_X@Qru+B!f=D4}dM`Ed2gD>P5?Uu@StA4#Gpg4s;0q z2H1&C!Z&=6HlkDT$h&;94;_Yw-%US0h=%|4ebVSoc*Z?GISCzwYd{4$0XL*+BRUEH z07TF^_%~oCx)WZ0Fa4`!;HNh-R<#WLW{Xdn(FJ&O8{<&(;Xx1JQ*;Qv?;-jQorOPq z82i!k2<12Xq*Keoa~@;gd5C_28y?4gbP^u(1pR`Jz*j%X{;v7(q#t6x=ELKk!%o$3 z>yLd>jn2XqFZyJK=ED`Qu)nB=-+G<#hAzM-zQq_rhv6r7VH-LJKk+-C>`@Kh_YU@C zsT2P2kN6WUf8w~;$@oX-;LRW4AJy=%Jsca+VfaJPq~$;IN&6=pXV6)A;-`!UbOip` z=a;OO@%!bBUVhnzj=~@I@pH{Wez{);_4CUfbO>%Z$S;A1@dG@izhC;Jqi}AZUk*bn zKRnnkb5+B~4E0MbIt<_P1;4C9r{I^4@ymL29)4(;Umitg;gd#SgO-QSKGrWg&{25s zaemp24#82dNAuxfC;DZtmWLOg>X+anj4OC^gdezXtoz1^CKuV%wwS!zZr7Hgp*N2{;LzhdZywKWODM zzJ+b*C_D=+LdW3*s6{JZ)l3?lg!|p>mn1p}k6P`Qb?6A(cq`*d%fS8=eX3>P9pF`T z0salxiSC5=fdX1?^UE7+{PMPzfxmnweT|O5)$18=k6{D6?r!=Lord4K*Dn*%1=!!h z*h2^5=2mP*r{MKqg_egO0ZDWYF3&I~wLClmtVM_6{%veS^Of6a3px!C>+s9-S_a+> zUPb5N!4F_FIs{jNJ?I2H;33+E4#K|$!N+MYyesRMkZSmqhy7B4F2KDWWt^ac@M%xb z7w8E50<(rD(0OB}b4#8oNLMx8}Yta!{=MY_o zj>2=ndUPDF25EExegSMm=i$FTg-_73l`-%%K0ycJX<#Qh3U35&qqFdK(235&cjfR8 zIt}0T4Ex~|Xn6K>*ouzBGoSa%P;?aj>yH?#XnDaer-Je5F#KH*L8sySz)W-&KL5uY zBhYbpIhc=5!uNo`aPe-#Mx^~K@aK>(eGp8@^RdH9}}@u%j)AA_N2$#ZP^Ir|Pe2)_izYkBz6R~UQf z1boCV@gX_{AHM@%p~LXdHyC@G50Bc3AJ7rF&zp=BbP#?TY(nSYd*9;tiO#~)3yc$V z6n^Jzj-}{MxcWWD2|59PT2?0e&=M$HaZ6f4x^3eAbi&0Wik~Vg+~pB(Ghs+5oI!8^WjENjZVV14k?pG=oI{O(1b3) z?|>EPPWZUbQ5GGBp9an7|LK3eUK}e&`@+8deWd^7@^GJc??kU?Am`8XyS9GJ_b|G5 zxK})oD2w`Yz5v&>E6HcP^q%Yw`x3?9zH!wj2CV!z>GEDuz90}Ti~AG4C~4i!Y__9i zt!>)N_X$X!*=1pW+?O!coorh-*jIv+`-cyT_e=DRmgjos0|kHQXVf#=tVip#wAS&g zM;)5K(j(v9b}hHTqnze1@W{8?sO@#zvCE_UpnfvQH%Qz|d|JO(`Gd>l;Mx7cedFbc zKGEK}K;B>I>KFBY|MH%71p;Du)pL1yZ?TU6AIFfQC#lcAZofX_+%n6xo%a4T+B2f3 z4M+8tqZS=XTaW9xOxrry?E&hwd}*&=%dYe&YizfpXWiVKuFv#?$9S@QX|dO~v@do4weN#gd3zst`NX}R zee7%bm3D7?Y{y>SJ*F%h>}9Mx!$0Tv+}`XOJ61Wn{cccK;F7Ix;rmbz++i$m7k6E*A$LmsK3%k0{!Ls@;W%fknyeCFkUul0@bc5=`0ruBOH%w4b7dE0$ncBj48`Tw1-c}}HA zo|5~u`bdvu3t)S{4D2fd7jbX2z;zt=Iv02y^W5#V*KPQ2pttXy_2?_FbC*%asGfBg z`5x!PQrk50J+33PA18a*VsD4~&Kjp)e$hHsdemX9W3lclYr2o3MqhdP!MZN@8V9Au zombyz8?5t@dp~ujwT*_4N{n@{_St=;+jn2Tma^6E5BvRym9Mra?DgB1dG&$4tos;Y zUskHWHGhLgAL{sCXcU6msG2))bI1ZH>yI=IM$E&PYp4T;p`?|z_kE8xd&^C+Jzbiequlc(? z@;~z!^SKhoB#&zoqn=|*l=rx&GRmLWvwW#B`dRHN)!xY-?bUj|=#lT$7jC~>J~nLk zxED0?Ki{)WM!v^!yi}Y19$PG%E<0K-+xt0LuzQGHu;U1cZW}CTZaG~3EpwQRT{lQh zYCcqkH4WrGHpqSK*b+7lE0JHS|GrS7{NX+G_1O7}>;6#p<$Bw>!o6?X$GPsmrN)er ze`?Qd8u?>NM`v*H+dwrnd8Mfqfm__9L!i-@v}T20k*N%*@U8%9j<4XU^8M82j~{ZclA> z94mYE>i0_TGUIA2%5wFOUZc6&WUr@G-PXF+a(nyi*O~UZ?Al(&>L>eh_gJ>d=yu%8 z+-a+<+cr(>bA4sK-&5XT`e8JFP@lV>N4o2_)*aBN*MQM|%gi%T&gcj2pV1!uqh)8i z%DR1S_lNr7S@U_BTkkUSbxc3&x;HiU(<6HB*T%ExzMR87j-i$hboEOiX9ms2|@Q`Vkm)o1semFMm^D_`3-+O=P~%X*bj zJKftk)V#m3-o0oU_w}FVDLm{a`@r8n(F6NG+%QWwx8-+bMxPMEEsBu^-p%gfz2|Rv zXPV*Ndn@m$fySk1T!_Zo>hB=*Hw+ptuW{oVOC6fZ>v7^aLo118CC*gi6*Xo~W1sbR z1R6t`zK+;;;vO}=Q)31-rd?zEG)6;X^E3ude`}&~&KiTRzc10)W{o4)c=MDR80J0j zdYD*2jdj-eXpOPd7;%j;*LZdPjf%!cYrL7perc?k#+YeLn8ufBT$#p-X-t{Ml4%T? z#;j>vmd1W*EStt_X?&Z;aOH>%)3`T{?b28;jfd0tFO475I5~|A)7UwU71Q`Kjd{~} zJB_o`_&WVPjK*1OjI_p=XzYo`oM=3X#$s#ymBvD8?3Kn`X^fP{TWOq?#!hLBmBvF+%@^D5G)w8n>u1=Ncof zG2F z7l2xDEw}?@z*dk4yTK^62W9VLGZ+h|gNs2uXa?T{Z6F8o z;MZUe=>GwJ0;9oHFdr-d*8)A;`Gpu1;k}sj;d{Y-`F`#}eBX5d-|IYtIgJPM{oFx( zoAz)S%t2xZ1N%t6Ry&k0xE{?+ydgP8z9_?FIA3!;R*vKQi^ntn?TLKX^<=)&cq*Uz z8^w1$$MBubv3!T~H0Ge4z&x{G=G&a7^DWLv5|J}xvP_YwGEJt-nao>$mYgkLk(qK1 zbDN*XeCe}fHb3B+EA#m2*7-7DF5qWd7c#f`*X3enH;+rDERZUxmKs?omoP{AV!2c< zuo)yQRhKk^FZM_(>i%2l$0FZW%;Ow~!bPFBh{WtChn-;x`o zS#Fe@63m|~+wGaBU5>cy9%_)>q2seUfi zZzRS>>8y7#YpSVwGk3ISt}%f^teQChVu zYm9e3Qw7vpOS+0P3qr!mv{j=sU}-ipkg%3j+Q?Po-1)_cGuXCn!z^9R`d%hhmoTw9 zmZ)oJ>}g9i^8giHY}L#M9j{<+lUQ|Cqq(g`%=qQIk>Hb0GsQHY(gS zDqLLKN{_WCM>UNaWlxW88a3LP9%oOEX=27L!`fnP6-}cmoaxi-$+1nN99tXLG|Exk zxTf*;;!O@yn(T&Pm#ySz*D|{eW18$1j%l)Qu)?ukMU#EK3WqINZg<<*CVM+*hTXPt zjxCOJZ1FUwgHCI*`)9n<9pfGLOlX>5YcaD=@-f(M&o5rcLCcm#dP;zw9@8aEGDf1XQs>!H&R`L z(M&m)nS;t$)-@Q-l->TW!DuY&8jNPjZcF!IG!}LZMkCcd7|oZ6V(}g3;>=;L$=^jU(*;GfKIWir2rZXLR<``RA zb4BrpzNC^XD7AzMjhDt26lW-nHRueb#eB|BwS0qG_YR%Yx|pdaZPxFaL(1H3jO<0` z30*5SGU_X@h#4O$H@0JBbx(L?<~1x|S`}-oV+AHvv(CB=Ofk)MOmV(Vqo96p+I=F@ zJo6-FnxQ#5ol<4Jo{H7_qScyjUSaTgcAa^X*?GI_brvgIgh&i^iQe9b<}2!u41}tMCnZ0df`%B#cZ%~z2wm!#r!2P z{nmZaek;e`NoJnmXL~7UzZFZlI*4ml5>Z2;P0RBfr;FaT7MUn2V|l@Aj5s# zd3(qkUe=wq$|_GJ#!Ua_np|sg(&Rf#-emGtlk+C;GI^iL{d*Pb8)@=HljoXTZSs{S zuQj>d(d0)>e%9peChsu0 zVDdXA?=g9w$pN05>)*j94>mbu@(Ctam^{(ssV2`f`KuW z$>hgP&Y8U3cD*bY%&qJ43(p{9F`ncxuX__$#dAn4u3J!?jzXV5#+EFIRV}OM zQVhReEwRca4VT1>qOx7|3TbJb$V?xPFBUV+D;Lj?`(ivlxr|pEF|*Fo%3{lw8hL#K z#m6**0+o$*i+Lpz;5wBh%&HYA)_Gh&ryJKXHZrhqVePVpMSPJeurN`-cxmH88H-xh zSS1qz3w3D9my~NnrUe!n7dIkj2QFd1Sb910=>({l$!GP^9A7mHEHSsVBEUUDRf3+n zRuz|-e7_|C6^qMv0}YEWSz1}kmvaIQ=63H5H0ZU|LXrCeJTs|Ugnb>VOj{pRU0bu1 zufnKWTD2r0zYknd)nMf5QCp8!|2%wU+U#?u%^Wk@ctp#V4`bW^6R@P=@~Zkq%PRHD zfxjLe2s-Cwv6gqu7v-8a%36Ma|Cf0nRGj}NZgTCm;`|U{_dGZM%bNW!)0`0RvbC}4 zcsh}WqZ-f8yY>5b-`{!vUS779w**^;w1iqlwuD>8w?tZIv_xCxx5Qf(wIo`aT9Pfz zEvc4uE$Nm_OSWZ8ORi;GOTJ}COQB_VOJ~boUe%Si23v=;hFV9qhFizCMp|dIMqB5% z##DEkZwslKuu60{$zI8`yp>=m_XY1Zp$&_b;nIV}_W@ILu z8J~${W@Mt7`I&fTQ6`aT$|N(*nN((7CY{M-vY9QJTxMG)pV^TqWOipdGkY`AR^AqD z8`2hP8`&0a8{Zabo6#0+o8K01Thx|lYidijHMgbO*0rVEGHuzmEp55BZEg8B{1E5e zE>yU8H!mK;v^z?h6SOx)TeGw?Pa8XFUy!ziX;+jsC1_8Iwq$8Xo;Gx1e-PWl*d4{@ z1ooz|HH)2jZ0y9oAhw0ED~e4C>`7ru7CZ87g|^N%X%DuC+QaRU_Go*&J<*5gnit|Q-3=;-W_O~Fl}P2o*k5E}hF ZBpptV*M1Ha)1mZ8D~HSjfB$M8_z$Bnd(;2` literal 0 HcmV?d00001 diff --git a/src/SDL2/VisualC/external/lib/x64/libpng16-16.dll b/src/SDL2/VisualC/external/lib/x64/libpng16-16.dll new file mode 100755 index 0000000000000000000000000000000000000000..f43005aeeae47b218042647976a1cab79e598abf GIT binary patch literal 216064 zcmdSCdwf*I`9Hq9NgzPr1Pl@_>Y|G#m13f32^YI3?BZEmG)fRGs3;h*rAlEJs3K(9 zU6SK*H59FWTH9KC-jIo@Kpo(GWn%@BN-Rdr7eU^!NSi z`_1c>J#%KBdFGjCo_S{GnP=uq{%(^k&t|jbsD-~ZGjdB6o52iX4H z=Z#_O?fy50)y}zI%d+%Cs`wyJ6Z@=fBdjrlp?sP5)-s8Oc9;fH}Db63j1%tb4k0RtBf7X4c3#w+C*= z`%{d23NXa^5P!0NZd*-!A*AR&us(T9SavSYSvl!sp+1c2CcWvijTZg;uAcd54iJ@I}a>9+Z#LsHloj?+?7Th`S-q|+U z)@XBqZ&FXVifR`3|MK4yE&Q=_gUt>J-Lb-9)AWRK3U%yTy7LR`kg#mG_E{6 z4$xuKt{La;OgU^DnO84ZjKs?LVNH4dtjaDe8rO^~zg&@Ldzq<$k_{$G>v~7iI|*?q z(t{ss#`vd^-{>9gbSRPIfZK2Ze$2tBLz4*j#Z<-x|2aZ+z=lB7U;XoX&W?MGJpg zs8xNj_$|}j^CDN1T)QcT9y(N4qPl@~i z_@eui$kTZ0hg*AtdtE|Yg>*EVht6`?ViUU1P>U;&U*F68SANyig+`429GNORQmq+& zhfmp+=mx}^cMK8bN%(&b2W4@+CHN2kf(?~Bfr)tDKz!z$72K{ztsxffTiXfHT-OBn z0w>^sSG0HN#2aAi(mu!ci0+vBeVsBb-kdFudRL3KdG&ap0t9NUaR@~>F7yjtg^;8<+w-A5- zB-CLvHGi|P_&|9{8)bd?S?$D!H40=eJIcE~IKLW`gAV&`W)M@HXnK3f-aU+l` z&)lch7U1fT!M?Z>G1+iM;Ip%e!{%*9@6k)wh_T+tCZ79UAC$YC1IKTL3m9 z0@G0svgWE)Y}lt#GGh9>anDKj<8W(zHKjVQhZ zqX-5aFu{49KFU;9{tD>z&ZEjV|1678m79+q)s$~`dMmTz8LQQ~Yd@s_P5W-9qUYS& zYF;@Eq##2AKhxvp?=E3a8WFFXpyx01g4%gndu+lR&Y)t#W5#e{uOXkA45~ z<9Y&R7ESbp<0!LJl=)UpnV+C@rXI{`Z!r^^s~H0|{Y}kqi21|oDAl8^t1eSJ;*Q`C zG^4K;o9U{cMy=3{YDhnHDFP6GkIRh!py1^(ly#FgtBhWOzwyv3t#Qx&5*Jk32>(jBnh+dVmg_ z8_!tH^*%l6(?zvE{SM|)vHtS`h?orEyNK5G6POrjiDaoc9TkF_9m1$YvRGNyW_m@G z5?xNzF~7^{(@&`DIm^{zHeh`t(EwXIK{1r$S- zTQG?AZ^XM9K97+%BVu~Ny^J_|k?gbVl1?gVh>P2nUMoPeL7#18hceg9B;%m$@?uf* zq0?RCsY@1J`3mUhs@xYk{S~UcNY!^Y=3k(No9*EiyB0ddoWTz`fLY34%6sL`#*!gg zcr!pw3XsDY5d9EjXasPk)^!^{#;-*>Mc-_2hS&DQS`MhyDe`dQ;~U{LsE;qpP1 zaSS59&5fa-LtB!NW(*xWevI6oS7Yrj`p?Isec?{%fc6$>P8~nPYVdR6b@;jH8vMBW z<7aqZ{9Jr4elF>|_|nOc=85QUy%)QEu@WFYS-ALOEmoWF)a(g!SP(rq&2M#mA-I>? zneNZ>-B%t@y(PxW^<;7ivkyyOi1i^l9Vd~mRkoSW6kx^}UMk7Q>Mz}X9ig#^bBZa! zyMDbnFvAGVMUxD-p%abgPr!|(WMHfjW#$b2=sq;0{`X)%(YmTAUeixv8EQXneg}nV z<;Q}1b&)C4avh<&fx0m8Y$hgyZyFfx6k2UF>bY?`(YAJ=g~gg3_F~HMjJ(rH*FGt8CN4 zt(bRQf0|%{J*oY2$%NQ^W)CD%@5vZ7Z00jI^+XG56}!)_J~u7-0J!ayIFRnB^8itj zT|UkK%6O_VcRo2ytgJOom0siWaU$e;8fvoWzBPzy6%|&ZKSABaBq#c$4CO1)-yx*$ z5Ebm$Eb4bv$7V<@RZe%S+Bibu#>Fq1?CH|1?bwD;RJ05r6m)i@5D{vIfAifbb!~ zuB687nfYkCKYfF3c{UWAJuno%j^Ksr@g1IF4-Q4ytN@ftJ&E%4$wr~C#U4RlYlPlJ zUlZw>xtN?cYx-MK6M6MFl*nI+3_UjT8Un@&;?_6oiO@lt830lpaTzS&2#SkV`V!UXKYURwE^kZGg#@^;e*9|p$Sbt6h7$0OJo>Q)bLlJ@DGRv zg%yZk`Ci}bFU08gVS#3pTy9R3q=;mUEkA)38aKoKG|yRd6HhDmey z`!9EO2^M(G<8KdpL;s_Iv_=VG91^URwTN5|S(6NdJ%Z&pC7DX37Vo)CLqnRy6mTO< zm^1}eGp4x^If+3#Sqgx3e+EuBakBkkn#HSTy>7;<#ppw%|JAN8*~VIHm|6ITAi?<; zg&-=CeBcL;PDBvpGKo?csPKBPcnue`gw`;D_=g|?L=YO}*7{B7@KuSlqK+_j^hTYS zCATT|n-^tqrQ1PS7iP|?!;9Yl4WbkjdUC2Lg0K9`tGM(eS3x7AO&tZJIm?lIxm` z@S})|#+MDR?4Z7o_}#hq?-uw8Ch$Ln0P#OPCCyos!btwL3UmzViDWA>;t|IK!+r8z zu(wH?qMeu#U;(B?)&f$f=-)A5oQo-m68R~^6n@D31~34*_hKfpoaMf6?mf}f)zNIX zM%JYOk|XO18N$f=AVS?oR!lM+K^I5XL4t2bICa3hH2Jq1Z8lCIl4*UwwG-zL*ND+| zXX;@0(es~c{ih`lbBFsmel7x`bxkrqhfknL&O==H(Q^)=a@M0@M4+E$gs4$4 zM#ARP-QL6W-kQFO>99F9>Ftd-LtMae1!p=s5)1}^ZX4bz}h?Vh+ zE9J^KU5}R$Ef|}YM@U=RdRC7**yK)*XxrBU7izKREkmA}2R((+<19_LR#Z|RFn)Z3 zdDcxR2W#KT4s!;Wm)e_||DiE%MjC*ne!;t~A?IDlQ|RM0Q7ckHbkR*yWcT-**U2P&_6;tOJrWqa6M?C5rOguGeZq3LVH9#(%IPa zFJoixq2(bRbqk^Z>9yFNj-DtWX|>2eUV$hqd??9fXg>6(&=zt*u4dOQakxj{?+8Ye zb?&^;6R>Tt7_UZNTB9zY#^3VRXqgoNz|EVc&9QPU5Z zTkE+0p+wgbeJm=XV}B8)8dFDWt&R)K}FRux~aA#iN`SdsPR>3q{$k7>UJU&$8m zmD9glXuawYlgrQK42&YV`ZHFrDv~3wx#P<_fg3ov_8Y5Q`Q$somutp`GQ7lw{#di0 zO7&{es@`9CsTNM5w<4Mq#Q;QpY$Ixfpw(#cO;gfxohTo9*SV0K9&}Nr3Y4-N6{Y*#P&M+G`#B9w? zc%Mj^ocHs3yyx|Jf4@immwUYbq{sV`9`9H6c<-D0uDn>itS%Z~a?P50V^U$zS^v-D zYaIHd!hkc}mcPc1P|z7Za2ijk&+6YO6zReJ;RB~cdSHLJjc_tObVuRIkFaPE^9FT& zG1!t^b0oWdr$F3~@wOAKt?AX+9t*)&g~4$M7RsOp!D1QoBUmbfwFo+8a3+FfGB^jp z3K^V-;Aj~PU_?hquU?uw7wwsCzn=S1lpi&8A`ChgU7>a)@`Mfv778h${V7)PKK9VP zItFtHmO1l~B|+AD8R>t?O&`}IJ+og6OZJnldKBX^e&dpJ?6;xL{n(j+{)M1(Y|evW zT}>P;RqdM*<52Cev=@5p?Vc(u8FxT{0BaD5vTk)qJPcBvIEY*akZT9xIS*6qZHa@0 zct_PHO`SSeX_$k|6JjMWhdmYnKvlc4;s!*aOgBnWF$0-^vQe}sx!S&+1;>gwS#Y9$ zz;hb)m!H_s;HTS{j zzG6OdyVRC%NtCcaPZ$W4XXT(AltBqnZdPx+Mv2%-O6Y{M`kEUhVm15^Y-634NQ!`@ zKaeOnNCxC0nK%0f_b3rDA8Xi4o`p_)|DL<&DUtgm-UWesexO7?mnngTcYyjg1@#4; zAyB@7QJNlc)gv-BBxn47ub%x|CiwJD3iCT&w!Nc)mTBB zNM`eON16B#C_R!BZ!aebibe(nx9jVgy6rcLz5R&mIkccK)YiI2VbKJ8#){NS`+)4$DTl6vu{@-HV6)<)UlEq{jrytnvj^fuP0|~^ zQpObkLL~OGGocU(;D7;5-hwS!DPfU+ zVi9{awzuP}x8M*pEi{sG>O-Lw>=hSJc9uxISA>%~hEAh_M` zv>+SDAQ0+$xU1^|rQte+V_y2QEb0^f3QN;L%&LDD{^(S=3yw%}lnDD)FQs7}LgB9p zl}ENS(B)8~e-$ykmzO|SO@zo{t|$DP%>TL=5HATGZePaKS-GkABNdy*Y47(V&^pClGknPs_r}&oMUz<=b)rQZ6AM`hJ=A*W9$XkVfg! zU+1LO(l3MG$OU-@AeJ<({F6knL#CUnkd*v|jQa$eIPP_J^8vt+xAna{pY?fL-vZBst7yd1%gsE^(n{wU8In>qGNHGJy4#T9`4h0lJBup(X6 zo7M0Kg@N;j$01s9CGlZz&|kH4@#EdnRUPwpFN{Nv#V6|n*{;@n+$xWSrdDIVq;7Ju zeEy`u;=PdXg+QL153x`;$#+C1>FK3z;uP^^{)oMfHO0Y)))WTj_A!$SklYmBrX}x2 zAkEM4HaC){Ax6@-rZ`Y&kv=f|2Gc0nS$SMDPKl02On6(qa1`V_S8)Iwgh!K=*N%4w z-^KcVv>#jEW&Rje6mrGg%C!alGz7{RFl*6{Sd5)5TmrPJy#csQ){i^e7R-l(hl{gE zx&Pm7ya|0w702yjH~m}a+2RqNEq>R0gdcU)BUy|@Sdg|DFS$6P!1d!;v@0+p+*Pcs zd<=|UKNwK2l4HKA7G=d9h^q4{)7t7h%E&htFT)P>_^TeIN7cyV3o3=<%4K{->N`r9 z_PUl{cehNm-_tVDQP%>O;MCytCB&%UC-uz211-HOkZj|=w41IXAQP@4v+yg(EVIZA zZDD1yT^!ybXm9#wt3ac@2jFFH$&&2-tZTm7tr9NE6` zT{yzrdf1}_pGQBaqUr1)rT-U=!nF*$?!{Lg5aE%D1@tFt(Ko{u0v;t69)W+yh*-6w zav#PCW#tx(8G>tVfcMAdxGIF7&oR8I`ulME(RX{w;kI*g3lLOwDi2kmk?4lA*}Nbh zrGdiuQDvY9el{ylqh_?Ia;^*#2G;>eIA!-nKLJE7Afh9X0*M)+hCj3W^rOgKme>G$ zhfUw>DL<*&-^Lzs6~^NcmVOL(!eMboU@%t4MZR#tuC_QvlF{%XMvYST$*~&{XRipp z!&(74Fod9KF!pYOqC{V8fn9CHn6uRmhoj1U;MsZD&O@nHCm-kw&a^5GXQ9>L_%$M? z+QXfg^E*K;JY*j31s;WynCW;1h$e2C*j1rbwFHl~pc^+souP9^PzfQu+eD?vm$v(c z2QPw$0)`;`ziUew@Si+rJ^{9YJMi`qK=<#1D^nYp0)~VW70DxFc#!z4=;SUD=Z5jWizNj4C7`)J8*L5kc+|(7^6FxaI_%2>gd60}h8kQ!6Fv?nIVY8?~^Tha~d zj=l@ZY6RQh_`c+&Xp{P7T_ZtDmlBhnM1IF>YT9>!)(kLUW~WN*|uc1=O@2e4a7{RxkaA|EW@D=z?gFB#E+Vi<_* zW1upwZlnU!V(@(t>`3)Vk2gC|O*IC0hYUMZxbel*3S_Tt%)VxewI$BRnl2=QKVh@iwJ}c~r0!(F;@RO7`Tm&O-eMcM zc&WMp`qQSCw@r%G7CQX!n?m*$H|4oKc+69^1NjQ=3oc9dzchZNq>EU12x4!kd|zw= znjo(t8>1fIqs6N2Esk$trG%pD7x(w+&B@QeG?bQl7Mz_1-!jwT#4fxXf6C}J^q?>U zy#{wuxD53lhc~Frgt@89PSswp5D|;dp^p2ZNE*3qaX-2Mf)056z-x-eN%I!8Ra370 zj`j|Y|*q^gXR@qH|eJ5yJYG9iO|6kF>?Ce`=*2Vz$c|1m6Q} zhTGrCTUdx)F|!(?2w6X0Ad}oq&o0H#W9f$}*m1Z%Uu>fhli5#X3$z(iij40UBdt&t z;V~}q7~jvgzn%AecrGW+56~W9#;=Si1S&$5gfq9xghuSLdW`#rBC*(*P@G1xut>GP z>&d&{Np0YT(feltT#0ZYWlSM>38F1r%dA9d6j);}&YMzd|I}kY4X9EH0>X{&4>hM+ zfC{ldkpp08rcNIFA^RcoatZQiTv-=SevB8P|3v@O=ppEYSzFV$Qwkmzpuuz0^#$y7 z+%-L7F4(~eDJca209ft|vVRU4ndDJ?2hJpo~y*q(7428tY=D(m-=K{VSR2 z7z^hdESqV9m1#GUkf}^&;%bfjVWwBCOe3I#71Ep__p%k!ZQ z_3$V>EFHjHXt%EA+p7}G2YBr4TcQ|@FIAhDu220bEB_w*cJd8G6sLX%Rq&gDTr7N! z^JjRy(|Y|UUg4tSw%SMSu)(_t#>3{|fSmq-{Yi3dge7go7zNN{F6+p12FHb$y5>6q zR|2OFoY26OfnN-zU7ksH2!cgEhdSZWEc^@?CsIF0rcub0-cUPY)@AZJviY*|H(HIk z52Fuz^p^1zuegUV_H~4~1g?j*c~YQ1=J$Po(hHQSF*H68GtTnICQQO`#0duXz|9iy z58bhMUHIBbee^3V((0Os0eKHEggWeRt5-$s>HaPulCOhNx%y7-M^uPxmM;_B^W#b* zJhrj)=cMLG2(8Hv^jBWIQS(&6cgF+`Yn)1yE*oncf%CN(l}i5*7Gcsi-n{BfDZv8( zk)<7zA{d<>c^)kXMQ|g#8ojlM#HS;S#z5 z)Cie8AOKI8tIidhX=kJ-k)9Tn6XsYzC3k}ta(oy2Hv*x2NBMrh3p*v{yXSa-RqtS| zt<_g?iULym3H+gb^oMS){G_rgHLwZ3b68_I!(F|V2!#j6v>CPdnKBgyuxYBWjDJw- zweMowO{%>aQH5UnUeDOGgUyJV4zQbHahn07S=##jU12w~w~w8eAN(a?W&-9Gz}%Jt zb87~sQ0_efZWiEf2i)u&xH~d%MM{+WrO{7KyJI5?fx!U`6GU{O zeJkEoV8aeTY#bA-g#obDW8CzmT6HK;UB9dto4CipUUZ86KSV?72R!1~#<5Z`gM)E$ zk7Ry?&1b2o+=27OiGw^*bxb<^y)oa1uV_vO9UO)y<)jgeoZ+Z1Ssnt*# zl{+ijJWyC=X7gS43gMhY5D}YUcKG?d=DuGfU0jzmZDuO`A++9)P?VxgzmuYc5cz=Z!GC!w!_lN z#gvd?=@rmqM1&y_(*VaM|Oy8eW|iVN2ULCAFza@{*i&1{+Zp+M0U(Biwitx zAWZi%6TJ5@xi@da{wF7RLy#yYcV}^OHxO?N`lRQU@^nMSpESo`bTp202!@U4#7k*_ zwgQW*^D)O%8tJ~IZeRk;>*cK~7S4~5K{$#QI?3q8L1RJ@#)5l1dRzI9s%^{f#4Jl- zT0FyJOeyh3cP_aRD*oC(YP~=3FazK9XM+B4Pm)>W3~pO9EXwCEs*g zaGF4aBaE0;0!@*HW|);+E|PJKQ6^hcb<<%b_eC=BPLcU9Wm8{QVxjo^QOTSSSxGJg zt}C^~O7AoiR$`k-gyH|Xq1nXWSc%UdaU<&hsQ`o%B9sMME`j8fy#bK0*QU>hhdy2p zG4S(DYdQ|&XReEoUED2)p+At@dh;LUP|My#M>O#bT5qJjjNe!o@)+9 zg2o1sGSfAmHsD6inAA;>vE`~f!TQKuh{3ct8@E?^WD22TBZLjDCiE4VqC~hKl93In z?C--lfbuvT381mo2gQcvTYB~7w~~9w zHtBwuRF#=e&2v@22u7W7SSI}t0|6ZO?18~`p=-r)ufcWSqe?$w{v9^jOyt#8WFM*L zLt7|7X?tvXzJ|k(&dK@#_}p3J$+cTCSLgxDLy0y1nB0lOezl*wg4O_rBzQr|QI2r4 z_|k-u_%fF-Pmnzx*L(z@LeNZ}5L}I32?3GF%sR9~ayZ_bGX4;=tTTRay2AOG%`kI# zdDLx>`3I3b*w3F{Fb)g}URW2pUNU6q-DF78><=rF7>;MjiZ^E5##7N97o&mwm`{@qdD_ooH0(@(_qLO{}s5nsF%Kt>+$5z+Mp(~ z<%@JIl{4uxws%V>ef1ljz)}RgWJh2Sh6}wtbmA*!xd>B)vgX*0P}$o;Cq*ev7!O2j zx_l2T!0>eeVA2lEP4e9w3@TE)Ku_Ag%UHD=Wndy=o(n!{#_IiiZ4EP)fAsUYaRc{y zE;ZoTCQXdH_QTP+945@l4lOorD^q#g0|wEsnw5_p>myAIZxAdOW;^;Cf5uuHnEYTS_yc$$a^mw5WzJ{g?8$J$iE2hvEc#`3~6BM!|+_1YBh}rj8@)vANKuN6dW}(y4ZfU;iEZ1kQ_K zi6;)5n<0^s{~phPR?T#cTKoaF2wdaTS7=$2TRgiyRbyh>t)KMhr_BpmXrhQKYqu8I z>RDenA#K(Y2NaZdfo9*X+3|MhGVC{0?NwH81)3&(x2o?0ot|Nb)m=QjMZ{j7NloEx}Aoi#;xSE=;3(-0X!x$#{gU#-!xo zD4NQg0w5uVTusHAWUo*3l(^*ULXmF}`ay~2L3WcA;Bom%!vIKoPq|7CM5IL{4mE@% zl~Fn@aJn=~a%>|xhIMzLy6dD`)xPKlS^cZG>+g!{x9|E4d|~ZTg;$Wj3$`O1vH=tJ zrQpj5vgO22cC(xgwgCei{k;gnLg8xDMEb#g^Alha3CBf85nV0v7?yytbHZcS9D_-u zmF;n=33N_iGhaZ?Gz*uFHcJ52vk}PWExF({ zpyC)W(09k-e{^yy=o05)Eq8c@$1rKM)51%N;USBHa3U6Zs5dU%@afyk@ALx!@~))R zK{@`3{K6WEC9Tip(|2rigZbtt$Uyj7Csveu%qPHHF~}1e_6Yo(6mvJNhBs79=WCgH z%*3`qn6AD2%Z%qYO~C~QuWcx0gQCHA9SSE4;WM$_8@u_p@Q5f_GytJj5vo#F{sut) z+1vcF^Low09XRvt)h+pbXJETk4Ifl|iDbSuyW<-8*Po?^4=4x}_470qUG9l#d9nG9 zaGc4LXSaD8OD<=|Tf!$gg9eWx&%kb-C-wyU58}sQZ%doqhLAI+IbaEyy~AhUnL1nY z1Dk=~Mz~#K6UtMyC(swP7TLU!w%~^{4<>lc{@LwFp4eD4DD^Y#iI#i^Bh&g4RvgV& z)xL1TWQ3}aeIOkE0~Hz^(-?ipJ0Iuyc6aU1miG!|7IbWb6y1RNE?XhIU-6+f%DQ}q+UQWleln1V zV@v+39Se&*RexXpdsIL8bRG7W+c`4?dm=z&v!(G7gLeEQsJA=~d#;*2?ki8gaP={0 zg^NvoAtVvlQ%|w%ESw)3D)u<8!MIB+-wg1V0ZvrnYA$3eMjqrKQLk_uLslRH)p-;) zB{~zL3>ua290Y)-LItC+fq%%JR1s5$^S^D$a)i?KqL{$5smC(&LsUzNwxTOCV};0A z$c$-tv46vBECR#p$6Tc0u*fZbL#Jhw@&F^nUUU*{5c;|f2>S;haJ$%tSLN|WvDo0L zb1`FxX|sI#ZgUm7w}_l#MarDXA0a+d9=A5-9*LCS`q8-Vf?L{@U^ogZK^%Yiu9D>O z47Rt1t1y*>GsIJz?=1_a0=%Uz~Q8f=PsH{_oa%h{zab;cIf`> z*%UL+=w003KGl1fi``g-p*AMYJhXW7oi_7hQIpUXk_5&yO`g5am-wJya%_szXWs?I z13djm$vKm&_AV+RjXq$NbV9xLTJ(3IbtHLrmMXeBso9cge^Fn0cgZopr?&^NS&3bJ zLmw@Mo1^BBPJ&l*JNj0O8fFkWi>HWu-6Ol}@2T?OjyTZCHk@1>xLw0R0a0RH)1#f} z3xRS>gSlH{3tXTXB1)@D1kS>N96BRo5o(UQf-dIJgNC;lce@B+z#~Xh{6i313^Ewn z!UEyrhWXW0*m0r)jWHQF(5w(e8wD>siJsEBB7;a@!Q7hh7zr{9u3grcqXKOfo9;zPc!{9+6L zA0Q6qZ`1g#jl*DH7_ycP5w}P2l7nTvQ(J}pO5P9fBwby5)~7gdk(D_BTVRON2pqwy zMJ3;cOp5$zkiHTE0R7D+Xu-5THNPQf&CDl6?%pUfJ>FWiUtf3kk~`-(=ie*r`P%xs z?+G~XU3BLHXn)3F3X5Y%+WNYA_b%quuZ*jxj6)}5uq+LplNx5>^ET#-!CxESjK&I- zpnK+{!^eXkqCbzeneUOXezfd-*zgbBlkFUVDYtfq^@^?`SIAzqnZ7boeH0WcMqhFF-$&$K*(*1PT@Z9ZU&ni_|*96a|?*z`KrlqQ!*jU@E3pK0F)3yZT8nL_SCA?A*e4)$%yA30x^)On0+ofw#crCRLTT=L9sBO3@q5u8AGo6lPM z&@Cz#;~kPvc;b=PbyHy%h6T^-6Bj2PkN{UXZb{Ad-Yzn$tOBk69{G6pP$lQ%hwjsi&KA{y2Y+w&~lK;65ID zDr{&xi#CYmV6-`F9}S0rB1j5%vv?trH13^oUJrw2Z(I!K85YNO6d9E5pF%#6-V3*a z6*uENcz6D>iTiWVg%xB)4TVTRd`*6XC%Vs&FDZY-kDV=y4_}ABAMy9Xg=Vg=FF%t$ z{C`QmFhHNi>rhTw%L2aIv7qDa(fxoNfG=FvoDI);9iZJ_c8`<|c8wV@`XE{ZK3_ zfW|{K-w|l4JccNTd)nWUh>&&>UYDGYeZ+I6?8)7yL%W5!+Katl)L-8X$*Y(FR>=O^ zz5add*GixHb?Lk^#7gHy9l80XK7$#U4!Pp2NDl@#ca(GiWrNE}t4)Hc<>qXjKh+2I$Wgka$WUd+N8Cj{-2GKg!SS z-`RAm%toAsyNYIs=19UwRnbUUSw*GEpRcZ@-x+ErJ_y) zZR_(<%^ZG+cd=NN`a$%z9QhOc#SK_#ew~kigW%xCn1?|7NC%_^pEcP%HkhwWkTLwLO}BG_m;e2;GJ&u7zAgcLt1jx*QlN) z`k{=0EFlKR!*Q-a#z1}$GnX-=Wej8nF*rBwce!N@B{{J7KB<4o z3GWi{=Mx@&?BA>&MR9rkCWq}gyU-#~p>E!}(@np3*I#`KE&T=m&ZR8SRwxVXuD=2g zu)HN0UyB3tS>D~$w{tAHnaL-(iTeds)PrF1rp%|~xuTJ;V7CmxW}~dD!G$=ua|Hhm zoC1b_A+|}7p#r-Fxb@oJuG`gCRvWZnZyK}9W8L&A^|KtkNyk87t^hPjGggd7z?#nf zD}EKa1Cn3JcNk?L-+DKm+4)CLeqsF7P^J?30AQj=?L`1(E0G-{fTV3q0uSb6zlQyd z;Ux$^hp^%B(}_W|4!q)C^O>$C;525xkW9{TRUICS)x%XiFQ6cBvEO*qa*4x2_9fve zU=t~q_>CvUD?pi25A-snjCuGfaa{rqPjX>}Jev5pQpU54t7sO4r;~1F#vpTTbN2kW z266FN&H!4LA5vZ>v;8$OzjBlBRc!xJR{M{X6D`r~tl0`qqeSIayoV45e6E>^QsD32 zo|eAa06@WA@(kr*Tk|&v2|n{YFUnIQO#}jO%fMTX9t=b7mhuVR1g8(&%WMnG;}d!a zs%u3j!7O<+goO!&87p9$2VIzZ2+I(~PrRLjXhO618tPB$bc7-t^7KsXZbxsfxpGT03E znBRJX3sj_w`@=QkK@GW31#^ppU7rJMw_s;M3)$Rc4+|9CKieN5&p5x5o#hDHcppDk zi)f#JM_&!fJcAgj8oPO=NP>5Z7^SSzvFzl1Vi1)o%Fig46&PuifC_`3WP*>}risVE zHUh}jiv{_To}T@&yF6n3RZV&PkLR1XlOa3bw5Fon^ozuw)~|&)*h~E9U@=?@WdSvb zma>aGZ~q;Anfak3J3pjkKj-K{6-mu#&=@{JwIW)+fO?BLIR$` zyH779IDD-j%me^9dj$Kh;8+j+ovu$Gc;n0Zgf_1MblrNJpeQRJU(fGr*?to--z^Tf z>+c($7Z}GrRtEc;=v-QCMI6}BPlN*jOX%%uMU3dUJQ+}ZA=y@p2ymO}*y~)e91Tv^(E{4!U#8dpFX@qgn-2S3qXamkd?WNaQ!@Jt(kz>O zr@R%hHBpy`VA5?~4^v`SbH>8NB-j($crrVr0Tu1$eKlUjRF5V>8}CSVo(orujJ)-z zKh}@ftG|qG{7wJt?L9siu~@+lAU+t;4vkZm`mwxkP+nVo;dSu;7>~PMx}CSn_`6}} z;Yk-sfDyu{|J8$or4Q4;Ufj6&2Lxc&wkZ!ig^=>dD*Uoy%RS}ss+Q%YxSU0PxWXGN zs?d%f!!|R%Ua@EpzR?56KI%zv(*pDr$n#)?9HA*|cbPn6i27^z0M6TV85mKC!<_NJ zVBhRc;c}P&)G7F_n^%J){@E=si;TzBAbw?Svv~!gx+4c`l_<|~!*YAWWK^~Wcet>! z_{;QHxxSa9$64k*k^rnPg(Xwi(^AKf|1#v~_|V@%k;yOY*=4X~n}1?SB)&O-1Cxh& zKMn3vK8N{eqv0V(;OkZ%widpGse(=3PnHP%o%#ahz2TST{rtlo?b9v4`HGeM40@NR z^B<(mJGDO}pAfZRKPa8FJW>AOWVj>w>rx6Cnm66wA&)hdJQii;@mO=}rCk2eejWOF zKK7206UX-gv&C6HT+*Gss!rV?Z-jfFcem;9D$$1_EbbN`voC;tJ4z?#bvx!K9fIN!%0VqL&$xQvS*Krafwx)N< z7&Q#{2;AnKTmi&5f-Elde*SuK*>(Cp?<6ke#C6_uw#ncle`xP_gEg@Cv&X{TPeygO z_cNXC4SkjA>kOpr{X*hk;)fq;;9AYtP@hK*b_K83aGUZNzY%@{5$x0>{Z;q~$LhIw z_3Ldu<(k6~E_3`4kX-%(Kd6QWVKw^;gb`vSjz2}fT~J)L`ECy#xUpEke5 zhktPUrdGa5;@Ct2eD)KXeG`F`+)$%Fr9DfI(S5=joZ&O_MJ zBr01FZkwVyw&3tqkxIDM5HmxWlR|NAzGD))SFW^2mCPF%i;WA~lrZ_snywoS|<4z}Planii^DPf?;eSN3% z7URg?HD8K-y`*`QNC;kzo_5S9d)gH!9qm;wQ1o8Z7kAX=5N!EmfFH5J&ssU`q*vC9 z_10IB6FujDR(pemAl=Z(Wr|QGT39rSVa!6*WZah)IRYe2*i6=&(#SnXQf>JHd5ZRU5;(>6*UH5x*lf;)tWae@4%7Y7c%F@iHsT#ef{#W>;6T+U z>c=5$%E|+xN~_syLd5o%ul@r2OJR|-TR*ZoQTbthQVd^PK#o9NnoYoXorUq25+nPq zh4BYjjK*qFm-0dd(lyA43vEhs_eE{T* z%9cLpt*rbeWK?Xkr|-->YJQRRu{a4sF38lwOHe`6|8urDt{O?h?lEtEoy#P#s;+fa z0u)A!#QxGg@T#qKT_GQr0fCZ{y#S96r9>96 zYIM=x)75T-Sz!G?PU|9oR&ldc!kbvJ{z~)$4w7M^Z;KbQy#b z3*?@@K>~s7md$?@+dffxZiP;JYyCA!OR>|BG(y#5o?J_8#jp^MkMZ;*`D9A#i_4m`^YPVnSuItBV~eU=lp@}4c;MzK(;ba;9Dt6@Id3c zftC}s!gO=v_WYkBX&eOn8sLqau(824Ib4BA=x#mSgji&R?m{z%8}XLpQLl`g)j-Zf z4^|p@Qy9Hpr8F%0f}CIz%i1Z?-=k}Ww>gr(#Iyc&rxdW{0Q6F0HKmI)U3%dqw*g=c zE`y_w9TexUCrFig(|Z|zli1+jTalr^Ap<}Dm?QE^!vnxz(NVKA!|IC>E9?~+>NCAW zY2X*vtSoQf%1Ntrj&bL$sT=NLS-?@S=2?K-37DRb;x2shOIf=a17L5QB+COYlWRdG zK%kGh;oE_nR>7`a8GQF4wj0-nmD{WV|H2uv|ti2gtJvkZb&j7@`V&4QR8XF%>jY`66u=Ik6#{dsbD z*H_JFzt&fAbVVA+PEO%6^9!-wGD4$7Cw>jGI5tF;s*9Kfed;$niZ`3Mf0wQ=@V^U{ zA*NNNBZar38ak>7=Sa8RjP=7MV$d8sSCN)y`#5`G^f*gdje}$Gm&m5-akah^x}}XT zaM<)TicDgx&)MG#Zz=_^XQ2~#Ss^wxq^=)`(e;)Su^Yuv%G( zK5kQ?vf-{4hxs6m*)8=nUGrhYw?|Nu3&9s2%V@)}jrlN}P)tl{&z}sRct0)~^@c%Mx?Gt*>4Tex404!m(ECv++WwbFjl=_WV?dY^{SnaDZxT`z2zn&2 zSgOuV%L!^ypsf50DQ2jlDxZ`TEV$ZXn>4$mUR>Rs(Vwggitg=$=1g8p#$o0(VNCcJ zD6~-&y=WCX-FVr{#=nCugfWVpz#<=GTq%k+D5AW&3mRWaKc+aczH)9d9R>}^yS_cy zH>Z6BiwHLRd9)@+sPqsB_o)he?ayxR!3dtNoA4bMKJI5yaW+er*Io6bp$=LUHtTM`A_9q*zwvf^KMn+s5@$q8EbXBs*OWzBH~Z zhb-FAc4@SzvqZWb$}WetKaML1yqfxLdVCWf1WonNv==-j;my{w0nTF8G3V)7Z?1>3 zxPzO=!LQ*1)CqDLnaw9Ea687z@FwbEeef#HRzLVEnk4#n z$W=E+O2WUs(m%BjMAjgetbrrYlKd&&pdY)TIfEdo%$_nbsT)D~mv8h zKJ}C}y6kTIx{huKB1sRVsvpQn@xpd2!}CHXD_P<=Z_OVwAsL%g1{Ua!DwQ=N66Dl8rtP4Hg8$7R+2B<;wG%@aIRR-4w zflKklGQd@>rlL~9j{qXw0u3whg0|+Wf=2Oaz!A6$5hMl?N`#bjgy-TFi<^jmHY9Xg zFoYJcRx1tHLBoChG}}XUjiop&@8)W-ktTQ)6a25RA<(9pn!vz&Esm+LgV8dfH9Q~1 z@(=S9x>slP8{lu3@G>RYFPjUWUSnm2R?cEr*vG2!qQS_#<=djQtjuq|CYw-3n#>&(9BFk@q63Anv?u=twUX8M zJ?uRFlawf7R~!VN0}7Y4^UN{WblvPcKitUaQQFRvHQ)S8bI*7#-lfeaaET@PSwoi+ zy%&^0glt#I4u1po>zj-hmVit83#>|V2uT-znemFY#H$QptY!zha+!jY^MP`h(}E?* zw^G7L&@XutswKw@96aEffq%juIcb2G$qyk=GTquA66SuMcaToM*fL;a`SXN980!wM zLhxXlV51qyL>d^v`ITVaon*GO9od2@^ai<|KqP zG((j{Il3SxIrw_CHOJdC=tWkZmvEzNe%<~_dVc`zWbK}O$AV@R;ayhB0~DD3ec!1W z_m}#swl25=`znEvSW#pD1lP1`!NKcUQ@es)}xj@$?wPVz=X|st}`DJeZ)Mn ziP9N3FLe5sIR3wUDpc4oT&hRKoDmq_vIppNL|s!Xf8B<=&;>j(&qN1~w5o~D3yvrC z9Xn2V$`j@s;u2%Zx5exQ1Ax-2p@ye6T|ua z!9)@+W+i>O|85lAfOrsxBfLfY+(nDz90bqe1s;crW07K8Ju;fbnPe)cjDG5IpT=mv zQEB|y^%RIv^}lMkf%X{}9ZfuNP@@BkYD_GF{qtac_@w=ueYjL1-0WE62$p!OwyDZv zxYq0lZpc^rv|}*_{GX%5=00g*j8~*3`1CT@P=@of$!E0 z_E)kk3eBUf(0NTBW15?HGevOUj6f3HmkkP{~jKYG*9_v75B;b=HIB_6%qtM3Z$9~SN$hBHwp4JWh@ z;{OAjDBo;n<=0^k@fI`-?~_;7?$q+8m9iD(CAhLB^Q`s@7D3${!TPz)-8iBzY#=x} z3-3qy=|Fx~jbBQE`gNo4b_M$odvpwkAfw=qI0NU^f@Ti=m5)H{(pTe6l0 zCt8Dz!2Z<1HbN&H@A z?Lp0uoV_mQx+Cy?a+V*GKIsVdM^`%vuI{W;^%1q9ulNZn)NFBikqaAXsc$&Eu`Di@mk{3%aEpq;v%bk$7EhQlbzZ&5gP(kVl2`3vXoTGYUyC0)tl|7;@2GA_PagefWmoKby-=NArXsCKm2gNFFJQgb07j44iG;rL=8S6}$VMn{VS zW!B((bwHr3yPO0dfsvZ{#to>6l6LqZB$Vj2FeXkmep`yVCq~9n2h=}yYc&V&B0#d_W z7{9lRK)#??iN3@dNNJTXVjZU6ufZ$s2@oW^rZt2&vALBYjN(>*0#zXK0*$yEXV-_KJw3qWiA|I<;>w-4Oy>CE3=dU( zixSxlIb%yhF#e|uJVOIcM}aV0Jj{s!oILq0aXG(N(Qc8S;10xeE8{7Y2R=&R;pLEC zy%RbBq?<=@x*Ofs?zMm9sp?p~wG!J)qHFY)&7(9d#~{jv=-tmQ?}Ng6IyU$jY|t@Q zeVJAtTv+Drm{(!%Y|Or;?W zkq)#r>#Rgws3Y=dRk;5N-&ezxQh2MuTdfj3-Iq;_$rUA4#}u`h)dssc42qhg7!TDO zZtpP)F2Kn(+-#kmqI&h+VuqTYARV601x5+yN1(|L|Cle~{IwkylYwzH$qook6KI0G zw;-6NDL5cQPvlv|cduXsUMeqhWUFj@g#%kE&x0GIFq(;y7S_`mQ$_2WS?^Qp?8 zbnQp^m`Hct9ft#w4J@3gw~|$uaw=<&Sg}xBxOESug3MY{jHSD>cDt48=h>qzSWDJ! z;D{W{pP{VXV~@w04&tqV!!z2p21Mhm%S_j-R6g#nJcK#!S?T(FV&B90t+hDnmSzKP z%d5lZAI?@|MPt17gI@g|RZf&Kw^Bm~=9Qqo3 zUfXjemYLQ}8q-=xA66|d<}XH8#Kz^yhgr|VM3YHHw;{#8O*0-6ya9mFx_9HoQ_t9W zE=`GE4W@?4h&*sB54`c@&2cTk(S=&vCG`b+Bbs@x2kkvy=p6c(?*|uzI!(sWiF`)1 z6e_|RQDD>2^vz1-X-pY}1_^iAlTYF$GatyY!=O)t2j-#4Y&JROQm0=H-Ja>1O7t?k zb{FwC(Frs7AaLStEc2q{)P~R~9J_($19XiXG=IgbR5Mspe+3nr2ja!Y3;QAfEi>CC zwamWtm=wbZFjB2QiO(_BgLquNArG;k19m6bCw zPLUr=zCb?Ft7WY+b;7`tt`p!ywdQ?_X6L6W{{*?B4ioi16pPfa08R}TzvElpnA*Ez zk^f-~-m38?V}6_yql($$1y}$oYjLol#O{IiLdcHGw3EEe6JNZfORBUPGkSrtfyy~7&| z5`#1R=5q6MSg=*8?{Z;5u^ zH@#ttAO!=bL6nx$qYV_z8zyBECQuNh6jY?xgUUIl!VE2fZQ@MYc^LilHox@N8s(&G@MDlstzyOds?VAy^+`4|}+eb1n z{WZK9d1&}l9>+4O`WCRvFe+Mz9|UOtI47FDtwwzYf+_qUc5JZShq~6LYFd?6n9vJw z4ZVza{Yos+uZBv$X?}Af&w#wfLS7wIXJnZNMbrK?U@KJO?}dzzFRZv=DJ(DM<85VI zlN%3+6gI0I#OC!BP$K{(T-g1c-Pfs42uVpH#QNIx6&M~9DmH{=w==4DrjEd>I zBia;QUD_0dcB}SQ)oQjy)R%mGX>KLw8I2OS9^ebaonO}hx3VHhWW9V<`d`!>k{pxz zG#xDT#tJ`Y*xpzf(sIq+xCA$x-CGMwjSOX(DfzH+`^{bmX=@#Cn%H-p4c_kO1;3ZT zDDu2tBX0PKnRx(fsOKRin`T5+4?`zqx!t>95I+vV5pu~VmntY>{1ecWueHXsAKJ}g zGndXLudZ1fiq~uHnd|RDkhAbLhF(dot#Xr(ErtA$&+Z8pDQ3Pfyw%=PlqBq zdataxj1}(kDgeDIiCg-mNOG4u?aQc93~`~#-8iI_3@nY1*|sE*8NWzvvqr|9(rS`g z2A^|r1jm;%jq?69&G&_*W+${3^z(Dxub&^d(^_54CZ}ZR`Z6mep{U+tc$L{GY3wy( z8uhiI+{1bgwBi{lX@iS~T9G`wjYSb`mkNv-#{#oK z0@s{wAE9c4)43bx!_sHhqJbG+yUq!EC1#lu0s;a)q>)Y77=Z)!M3LHUABcutmX`OU;Vy32 z88l3w9h!KQTts7J#QYiBB4j6aA8iGcu`3O|%(a|}m_H&O^-ByYU|j}7bE(q50;yP= zO)db6%{}!y^ZH2e`iOn~Oz_%iU;lZM&HQWox*~YJ-M;$4t7l)Y2wuNwU;h|X^>zC? zCV0KfzP1OMTkPwC;Ol4X>#sj-+dY-n!|vDUJg>eG2grB<)Ecl@Ph21;ih`b|oJ@y?Eh&l8r2Y! z6@Qfla^Zo3(A3o$ljItCPiR#_;k=IXU^!j&o=)g4B&XxXhi<*Bcj9m6W^=*A@_Sj} zOj-|D`{_)08v@QUf!KD)-VOOA&xBU1l08T8K^H}wluUiv4w=g$sY`gaE?iIjreVMB zi_BMhC*ugJC8xPEG0r^O+ZRZ=q}%%$C!1$`mEsKZe66`Y(O{nK^@-0Fp1D3T&*m}L zExvA^?d6VZ%(K1Gku=Y`(&40TvU$vP4%xi69kSOg{%oG@HH^QQXM4?Kb&yBbFg6yR zsYmroPU6a-w3z(Gp(@r_YU`e#(^d;@m6BF+n(Uvh=1clm_S;49J_~qlhcpg}G0B@X zu;u;{WDkb7eUK@hAFI>#Vv#WvS+`8E=->O{VG4hV*`dyd?q>cQs_<)|LQ7A&Z1Ew> zCq5eF`}ezs;HT8mJ$C@SZda6&9FA!HuaPvgKLuQ0@C)^SSpLDEssDc`|7KLc{;|XI zpZ6z{M*p4sS71@>??!AX!L#ySlD0`U8iL;fJe%*~bi3k%@_+kIK4ypI z|F>U~q_dO{%3uEf`1plk`OkZpq~>8sHzKO~pB|QU32TmDGc4)4yGa^5EUE7=Bn_bA zWJE8WXh-y|-@K3C74GL|LV<0^6EZ2uEauwJ*4%lR>;*S7Qq*KE>b==xGD(@+db6vY z&RaDNoK+bq$YtbwJHNS6FX&c|H+w>Stg|X9P5y!t8(J60BH~NrQ4tKnBeNPe9y5Ead(jW&`#=aKo!*Cq{J)(BxN#^elX~- z4=~FXWg4%jM3Tm~KT?Cx6&O0o?%!Gd7pmemQFq}sQDADXRcmI(m|4bS!5xVBS=R6n z6Z=ZU;)01fku;amhjZtL+hU>a!JV?vG3Oh>H3etc4T3PxU-u`)b}*XQLSkT2ubUqt zpE-{!$ryYFcMQHrUfnT}ap-?_$6y&6$UC1>&+ zyru>t*KkuzLc|a$HasuO^Hgay7weX8~np z9gL4f~C;81JwIh+KmaNUpjTSo!1(xHkVu4lFi*Uaj(0}d$n(-eK&$Idg?k8-ZU}1cU_Y+pPl25*` z3vjqxuDA|DH1LBcYBuoS)FpsX-F=!ykz<0+UQ4oB2V?`Su`b?ks9MgKn@yYb>hbWe z+aJL#@xK@6m)D!zS&=+|0;va>)%uaim&y~Ab0)E79{v}n$XGD_f6j?*Anql>UFNy z{wZdGf*j5qq9#U149&R7S3|jn*#;(Gf3KgS#P$;<$0xhYuSp!+a$4IsxyxnED0DkObiA38QQ~ijfvrG}D#$`1#^{QhdEOJ5$M%w;2hyqx`@sE;OJCqqT>$KlX za<0EtaFLXJ{SbL{lrjT~D|5{LN$`Z?*O*$q%XA6K&ve@NY4T)nl`Qo@h|aBr7lN1S zqBe^*7QnJ$gL6W9fV%5(V{suT3|QON7v$&#plf#Sv+Ttp=!s^S9^^mcwhn|WAx+*) zw4)G`Q;+uNAahE5Wb*YF8>d13=!5BRZu1`72ldgV1nnPmTTwmM2B*=Ja0V>L6lK6M*dag*t zvbe0~NF5VPQ*Y{a66tms+r;)xMk9KEs|JNTU%ub?QzNhQSKH?mPo%xomJ-GmxcUs4D7j@D}NKL-4( zk-XKh%)d+{U;H)2*XW8_9qH!%oQ{P4=5n_o;Zx-Lr_3S`%j723keF7sFZ)#Q`YHZp zkSGiH44LGK+c8%U9BC(~ixZ3vi=vd&Uc&d8Z-SR~{(thymst?xNv5KZ{{Tt3PcqPk zZheI}w=Ib+tLWPl^=I(Hodj+FX?2#EV!aJ3WM)9_6Ri^eO%+c2Ht$DwBTXR< zm$^oD=C4L}Q>CBSO{IC-(qK&y9Wq+}#kAs5f3*flcU_R z%xb!PU8TqgR|btZO3W#Yl&E=>Ttm72g&X2_kR=gXd!2I{&Nx;f#lXV0Fn51 zv()hi8Sygzh|=SD-~~E1L${LXKS~XdZN2F<{4IA;N2%Yb*QnC3U|<4x_X`#TE8zVX z4na)pLjx<2U#*7DA+KOK?xdmf)z8qV`+z{v6l9#r{KdjscH(Eo*dhMnPtEJIY)V!B zJo_3AzSi?!MRyotR!a6nvmQv0xruuGI`kQ6FKcRx`QlyHutbj zqgPjtqF2T8=Yc4~N~f+T)2wO&cYtG@mrXp14&|=7gT4j{Z_?r1mq}0+LJUEkGpU*# zrm}_8a5Fy>Z0k^;V5Pf0%N0rqg!RA_?Zu}dF_y8k)DnTUrJMbhg3ZHW;iY?$dqSS# zv|VlvYA&paM~N8P5>kA?aY6_OxqmV31oK%slBuots$2AQ60o@38^z`U$c*lv2~N{G zmbpAqcVo>}&a#a_c}{i)-M$!kJFa+JGm7#h=iE9fMj58AJ1c=&EFxQTmRgE7WseEx zR-lm68v}Lm)L3Xov~KlvSK;F+f8K%)l+OD(k6hIo{|ElA=iC>Sr7=lt@gBugu&MiH zLPx!HTuW$MOGtr$PGuQdFxwk5Ek1&1Vd1IK(4J_rJFGep;a0ij{Ha=iiFe|cpeWxP z;plgo?aA`g$iJ6mS|4DlLhzlCvrL{JT#O6u)xbAm7*tDeqSr(B zu^wRS)w`eL|K5WjWo~V+*`T?7JG}0`m#{CEoUm$^f~(C>J*@sOHLVnkd3T#5qbSSlVi6exQXoVTA-dh^U9ArV z^zj)n+pd5-W{PmhunYWeghw?9^##(VZfvnE^S~Yb^sGoVZ+#GddWp2{%~4UV9ItBZjh! z6 zX*?%U6#(ce^**zhtba14Vwn>su`$;Y zlvz9`Q_p_sx|zIP&AlR30)P3ZQDk5uc>5>shCGt54kRC`zyzFyOiL8Y-f$Uc;4v~f*FB6eeCg6{h4YG* zO}g)##>ZNBsP5@ScL|26(TdAzrU{VcX!XTsW`*cb7uA)NM6Z~5w_O1(@;0;r?wlOG}Br6v_4VY{_^X- z~cr60C9BwgbwQ%qwR*8N<_|I@xATgr<_+&S89r?a6 zjs4l1W`7m{a~i-zLwRk_h;R2s==x_0h?UY7Yk6x*E_lL;qf4+PJ|sA-Nz`Hx1-$U!tdDe-kE~mW@09q-VcyTD8-o=z~GoP;(ly*1tG`pbybf>*Z6K5&Y_R`gKwp;`R=Kb`Q?LEVTn2L*3~`Q|Nkqk`>PavXR}_g$x7jp4NLxl0H`^yN zU1;YcRERJ>$659b@)( zlRf3rxuY<-FcNtzv_Cn(w*O~B&&{Voj<}}8TA0`502bb5@pFCl(ItCCr*nMvHftw# zurfR50^_Kn*@T94HA`+d8rmPNd&F6$OPCa_Xgj!? zr$u)q4}R8JKA)bgE!&cR#()Vq+&2&^%bmhTb#2*zEqUDnn%COhdc$B@JlA?~;66ra z(24Y>tMktpeW1-yF$5$79{{6)Z_xv?5}gsLdzo|d z^#Ex?F%wN&%cL3ZC|L}XUBcJw;*b##@L*KiBkme-AhrpO-cv|vtaul~EL}4j-M&|d zliJ5n?lfFBhoHAUf?PXS$vNFr{kG+@_fdCQ#Cx{38`Y8BGO%MPa9B6_%Bb4jzSr3> z7zs~W63bm@h{+l5I>WyYR);w3Jk;xQ*YDtQ$(O3ydbaYN?Fc4-%~f3Q?M-dqsls)l zy^X0Z``FmqdZ0DA4SV+eA%4=;{wL|O!FO_iW#%#77}!N8Ea>pNcy_X|AgYK=NASi`0Qsm!GDsAFEQLde^z%=zTd?~bLaa#@{xl)@Nr4uCuwCoCwtlY zN<05znMUK$=Kw~nmAT)&D#SdW@JrlkHIeR4SIIY2vN?O%6P3}-QD%}-W^HBeo2JYQ z!^)J_CzZTMC8uxay5Hj(+-PRPM{)RcEWDE%R#)a`QbVlnWkMboc_iiuDY7!s7ZrOb zKc%LJPshJjJlzrxE;teUvY6uoXvNS!uhu3ilYW@Jg^l1SdkZI}nPN`)bH`m`>>*M=)J(Mo0f}Z`uBVFp zzhG(cCknYpHpPSZ#1Gw*FOBf>!;}7(ZHPX=^jnA8OYozft z^K6YYmK2^b()gauV~jL(utvMa1Ls=PmNnA&xkn&zMFtzdTkWW4mz$yKegle5QWSR1D5< z@z-LEWm+Lc#-xzH;f6wf{|1xUeCImw7y6fdg+5J55bI~i0QUT%nE#w%`KyBb#30B{ z9M><;3wv|n3_=CE`@Okci;LyPQ;s}ua{kK~*4a~X&)sB}gH!Ui+WB7U>J>K@%WW5* zwe(r~e$UOt@4A>;(8tl@7Az$K^0clsomI=yV6<-8clhhvd>h#T3?b1hdV%0fdAQi5dQZE_-|NJ{Pb}?y${}Tu!5kd6wB}X{%wvMg70})=li~Y z@7Ch?M?dKMW<=hg{9Sx60d}C&uvmKOLswg|gkoryKK%OI#SfPc`!H}*@x$4}KAebz z9W?&QVIS`P_u_|%!#*T$FMfDe3V|XXNB_9^;blH7F#n3@iv|0Qz#QyZ><6ILXlAmB zTkuhyx#lcg_?;~bvOPVz-8^oMu0s#a;oJszpq%lbiB!g29Fy?6DR|v(Uv=QFuaDW+ z6^NpGebB!CK6w2dubE^edHdJE#Go1uqFP^j%Xp(za^n2f*ItZfGm8PtyHzQy+Hq&TU#M=ecgFR0XYAk zVeoc-1xr|Q{km8NBQvAPI*L3RCqnhaA2B;~e_KMkN&E#6Zrt05=aU&8Yhd=s$N9lv z;yg2hU(9`S%iv)DY9#nBNzGI4zX}9!*^SO}2FR{V`c9rO2N!?$dQA)fyraAmy(>Pt zjN^!8g<#KObsq~)K`@+(DRPUcJy-x*5e|_mas`tA~@0Eb;ca+|*l1Way^uAv0 z&n>;r)c0BTJ#%pwkfPl$Rph?>BdHJ1<9)f%E=hcmn?0X^?6GY4X(Nfl%GZTQgAwe| zx{>S6_$YFCE_ur_l&PnXbF-XaPVW!;pFKq;GGHp#w#?vM3X%SQ*JEQDSE$$%gzC-? z2X!rd(kO<5+Q{mUqB5rKU-sB(`)(_vJ;Xo2Q2V+wlGj&;;>VJEz~+W3WM9YnQk>rq zlj4z0jh~*AJ7f5k%x24P6WXsRMk=M9zoR_omx(@zcAB-CPIMLF*tGFAMt@(nY&9>fj`<6 z{!XEK|6h1MZ2caJzvd$Ten)N#JNUaEE!pAtn-V{XwIC**A3r8{wgJ;ba2GnKBqkTo zsr%oxRF?lkfuC`rojvkbe*`FR&ZL-EKZP9op5`^f*%pXT&lJi zZ!EO-i#RnPvw`}IujUJkFvUA4B z|IvZty!Dak>uWg!JA-A7tLs|koK!gvnR6!ecXI%~42nPFtTE2FF^}LR{g}dcg(>{K zrh}8xg)`%fZ+h2#njukdAFHY~@yZ~Ys|UnSJSZy!!#cJSS0;*TdW!t#Ofy=p+-Hc6 zL*2$5(e!>%z+bMDGSEMnk+b>;tk=3jg1v72HCMz~=%xe>#=K`gpuu;ymKto)Il}M; zA8(`jwfXNC$JY#;L0)10P8|D|A%@&H00mMjd`!_Tb$MbpUaAD@`F!`=>~#G;3OLih zt<(E+SJ6m&SH1K7wZ{GMu=qU1`GX;9FolkaVQmTW&3SV!zmnSP_9R9X=1X>BWdP8g z8x1cIMHl5!q$kct+6)mfb4)4x^a1AcfSG$RC{oNX`nRf(N8?gv>%IfSuZTl{(Bw2S zPw$(?BV9DL#zkqrQ|XSb1eQLs+PqEe&fRjUNggqZgheNi@yHQ2MBb66hxu2Rn#>>9);owv0ey!`rsL2pz1q~yWD`0;HAe?Mz*Fj1#N znaN!zZa_d9arc~ZM3(^mwyLsfcD?rVsh@vuaD>hWO7~Hc2M6Q^XL#v+SCKx4@~cl7 zZ(B0oSTa+N(}X`Kbr|UUE6V*r$nHc^Z-US9)avxVMr*&ho@j^y??P zL&%=m0dIqhbyj;y+npMqL3vQ1rbK5ZsrS}b-fex1XcKz2HSsl+m^9>T`OvRHE$^DS zL%VIpgKL>~3%@~jK0T?eb-Fxs~Ft~J(J6juC%fdQ#@r=v#Xy!vv zFS7y~c2=ER>D~29p6b&N{DPkaUgr1wB-|4R2bK;VsbZd~)=-E!Z3*ZPRJOfgNTl@1 zU!Ew+vuzt&v7_{iL0~CIY5XmJpN3QmImT)hvemi5)Tcl<#?x5tz+4Rw4#v22X(cem zZK1&?QFXS%fQIk`Gan3&a^GMKz|QD4(_3(k1g?2HjDHNtujmp(@`nra`tRk}{f8m> z!O;iQAMBS)Ozo}9wsyQZFnH#|Z&%MIcC^e$_`35yeX=-&b_DT=VBhij7}63AX8<88u0Z`(_)WU@43!~KkD9Y!$) zet^@=W7_VNmQ*xZf^Pa||8iQE{P2@qmgR(4**k{hwG(Mduuz!m!V89ex6>DjH$8n= z#=^$*gDOu7s{EanwCu$5g4dt%Y7O*?>w{gN2v@t2Y34nX`w2oLmJHfp7eqS+nJLZB z!_L!K|1}(Pynz%B>wJ3p<|fRnBm*>hPhcV;p7V?mpzu}!{@mm(LPx!PHjQU+B6V># z);HJj2>}yx)u~SVPZ=riotRD+x8;6wGoA3ZHF?XgB0Gt>ACl6J8?WUHNmzn_(3JV1 zzNN$EJSmYUIhW(mXX?_I?ysC=%0;tZsL1`8vTCI0UkgL3Y1}4^)YM#VI>2?^sP|rW z$zY4OKbE-?8#wPRcoAB1jw5C^dV9~nTG`1;4U6}&x_6xH6O@a2ue;v!k?gg)5QaYt zHoO&X-QS#)sMhH;#z{5r)oyg1}8z?q|V)w{v$~k{4DK7uL+p)d*=wurT^LVkVcxXU699L2#Xuo$zcl zGdhyKii_%xga9*=UWlH7|JW|e$gU~5rb0I1?b;*8y!RN%7H{43?bEdnJX1T?L{||YKv~5t>PpnG{!T42LLMvPRJ0wOSO4n9e z9w$46kEAqI;T~l@$zv+z3N>3rvdnlH>HYChPUit0)^nn-D7n*O^Iwe4e*w$-@FX^% zm$rm9VO)o`cep+l+JvH{lDg{4Bk6j1aXF>MHrw8HHufx&65o&^%v4Twmi#m3n)Chq zhwApm&nnRTk_(8%*ivze^oBH96`9$acoEZ;F;m@iRq0bur*fED>-HudEL72$9vgf% zpO*fPersk4+{W|-oVA+QrpzrG3HlzML|4X4#=m6&Mfkj&6lAMU&zhvc|41}5PS`Yl z5umb=PHAhL?Dq{lFtPl9XN}kVgb1+k{Vlq3Gt<=*=jKhUC2abpcMX}}&dv9e3h5|I z{pRao-;qjk&LoFV z7=J2Q^xoDi{SfL|Gd!0=0}SqAL$d@ZeyC6RT|zIHURt|cSTzUS{} z|8b}02*a03F;v`j2pV2;shEI_^rvH28Xm3o&uE(89R(JK>==}iK9P6k;I`z2rBt>l z?`r}^L-_ovhHr2Kv%cJA3I_Gb!mBCS1#5p|=}KYX7%%`g5?K0YxRL)a5Tx#9+|2O> zlm!4p5}v-9`J{YwX-u^$xT0x3%2;3hJ*LtEa()4j-n{Rung(BJY6|5jF^Nobm2*xx zU`@kB7qAwVrzb_ybMYxVr<}^oY)?;M`k9H358kn|OJha@?=wqV4T(>GMMQoGz*@YW zB^D8KIyaHYxrOVLYUzAtJ=@5-S-Xw{8Jl|@ zFZvX2tbL@>%emd}9oINL*I1j=`pV5FK8<+ar_laLUH8%%m_-B~j?}#!$M0!({@{eSP-VB@hiHyO_h2(VSm1M3GMn!QVVnt}wY z$goe72Q|EI`1x>@wWi3Dokq^}a^OZ^)v|5Iv+ zJYQWVkInzZeqrqYGXKuE4y*rz_6tMc`NQG){~LJPhUXvm-@$*r%|A}t`-?zKuxY3_ zA_4t2{I)p$&lnoDdru6ta^p>Dd?7GD*oB}E&<=zR#Q!r1>{8my%$fK#gbX!t+SkE- zM`34DUx*qL=OQ5$>_ZCeU0!G}Q2+rcF`p{Dluao!H!nN7Uw7_%WZsRVyI*y> z-x|@qd&Ju0bm|Rx`}gg{ZSk&A3%py^=)RryS&edTRNOxV`&mPv>}A)yAdSn^xA~t9 ztu_=NZ?=@m$4B@mf?bz8io^oJcHu(G+>E6!)6i=A=vzwrjW$o41>Dn8^1D$U&33lb z{$cig#HQBvj;1*$IxCWC(tnfhnnayW`*w`{3R5&d-W2wI85PW* z-jVV2plE9+ka3;aJZjL^C6%tH`}C(+gWc-Ahzw&?0NN*pQ6jM!hg9AIwA_#8sbQedc&Bu+(UC{-)lWpCu(iro};^o9js5QAC&9n~mAdIL^|B8;}z24l63y?v~79(qnkQ@B(-+lsxvdq$%ig23{1bk=DN4Jpm{lP^Z`;a%=U z(l>(ZuABT9k<|-0Yc~gaowrs(AY7g@^I#v>c5crno}M$Hm5xClK6dcysC z0ZJ&9_?KkGx0yaPRh0OV(^-k*g)OEpJy=R2dTBS9j=tw~MhAjVLDB$83XQJZK@xU< z8xs#$1Y^lz^@#rKsK|=ru{AgMY^d1GW&e33O?xDa4VEIxf^j?I#^qQ9qka-J>TTUi z8PIOOnxQu&F*Ji{VQ2;wKzK5K#Y_#F$U`%zKrzG656b9o2dV&GtSkbR*1*#DN`wtz z{#Z2c??&I0+zIvFN*T!1cpCxNsz;ztWpLeA`7^kJLEs5hw^#;Gp~TU+JPTZ73^P>(09e3KN(v)V#Nz|?1n&4N_sr@4a2O%I{12Fhek-X;{_zI3# zR^4T%)v7zqj9PV<5CR7jZJ=>z^zsq!HSaAa^=&u_9*@j+6X|_7|G!etZ~g>JzmfFO z_33Lu_33XS?Q|on_aLit#vGv>w5Ev%R>GCo^2YnH-yMu^0Xi;E;i$L&gvMI*;@n|; zmitqWG-Ok7RD-rI+{oc_w|jqO8bgv&Eh<{OuK$XVN;xand~lHlEX@xqv$p>VT+8m^ zQ1S0H(@<`1Wpw0z9D_K`>S;Bt{?7eiyC^TjGCx+IoK^d#Z^kA9nb|dhR)K$N9*oDS zZG3cUL!%SnVpwC3HZkm9UeP+<{#V8YCRuik-1fizD+=i*`qaREt|k~df4kd zl6#1U_T6$)-u@|i$eWf61rA(n2PYqSZ2o`~yN*0Utr@Us1)tHq8Je zC~_ABNyn1ZYECg&q0VHz3t<0=s_7^&hxRY<8Z1TxL?Iy3MiyofF^Qt#Qlh2kTSd{O zM7@zy)3TIkCVN=z6vvmvR{YxQhUHskz5EhJ!Z70*{1iJ}A(9H203nR>rJ+3kn-YDRW0Z#^1N(2Y{sidyesnmx zm@Pf$X}0)}Yb~>cWX`v?=9<7saNOee4gHFx>(<=I?N^DA#)E!9!$H|2`5F+gO`#&8 zJ@;2ywbl0$oI!#3eu-jI?$V65Cpf=F=wO^ri)J3! zLn0izp}*$SgbpL|8V(7hC>hG_amr6hEQG2b`#O=p8hEG%GoX_~MOsCM*H&JvZFONG z_`9_g*Mz@QT>-A1|GuVj|DWk&ARk!aU@03WKZKisjv~6AXO8nCBsuMy#LQPEMFb$u z4yxf=jFJX`AB{{fX8t|OZsk|Y3~H9zt&V?(PP>iJ5JqQeC5CWgXuba!L#6W!_r8l* zLf!k#Uwo~C>K=ck`KYzk%pc1&jZ6`c7^s#IhvL760XU@+Tvuz#ldeHD=LC!&z9#tK zA1xve?sFjOs5*QM=Rz&&q^Xu294QfVcD9QJm1M(Iyj?CcX$vXl1mBlFJg5N!v@V-d zG>mS_Ta#N^DvFbdM{+;oU10g&pq!;wLv-$gX8xW=YA}EQ#%d>y*7Y_6a~CU20baJ$ z+K{{Zx@70zwBKyFPJ{dcHJ^wrYipdlEZ_)ZZvBm$=E74smT4nei18Fkg|L zo2}I|{FOJ4TD4Yy7m&j7%2@=yzeZrQ=ZcS3ICS>&ysvGj4O#iaG#M_7SG&obhY(uT zDj?50fy`8(m}rso1+~i73aF~%Jty@^)yb|IT;L~~=<$~;VP@BLVc4W_()MK%8fR{D zmaP_yog}6kYPsRc72=**qtXp0<5G?xs^^f7rj)eL67Bw#*IxS_(@S-NHmX#Yc17Gur0%z8! zMOBoqyjL4640Y-A1t<9b$QIDj2N-Jk!C-Fjv!EOLC_{5(&$&9-J$k-d(uiyG87+atV_K=6z7`Qw{BxAM}}Zg$>aW3~ZJ_a?-i za@fyyU1ICbbM~;KqAApeY;;z3Oj&$YbYEXIv^qZ~+09-chfk<2@jIz}eBVKwv?ULW z)PA@rnGa3dkbkjA-_%acZnk+874Pe%4#o20G9oo&Ctl7SVzrPs%6P!i4y4edtn9LKxaq@=b&ae^g`WeTd z1LN*v$e5U>3xpih2nXG8a2-cCUI^OQZsUDT0)y33u)IJyr}G6*M~{xG{@LG)~@!BNnr`Uy~%s2F%$l_Im~-r71XVEZkGR& z2bhb1)x{}P_tNJuX1%7ql}ob5TY{8Kv2KxsXDgHI*`IWJ{&DYLWAiC|) z|7bvK2q8hcxD}bdp6W7Vz9SUYaeHXXsX-Hd>>r2p~#QWWlb6y z&zfGaDywtqXUIE-h*X8Qa*P?(L(_BdINmFLsfJ7R@2(4fn=jUNAoAW2h;K6x18wMJm<^*p`8!(8{YVN-lNcKgZ-3-?CE7Y()(7_6*N?4^kCr)I zO4U(cU##L1Mqt~uGpM_R?u-+Dn;>Kj#9(7B7eaHbNH#cc;Gn5{|D*_UVAJkkQ(fPp zO`4lSrlzwp#Kep;F#~(9_qWG>q>1)6UOO2Ks6BO<|GQvV^;FusDF62>g+AQsNG60o z{;$jm$IIVYO#_hBI=T{tk|4@>9(cJbLMX%?<*{0PEk)lgji>sAs;C)D)LmhoSr1_y z0FiE{eME8aRi4;dv^TWX|7u9}-zimJVXNOiv{FQnhLO}XN{L#gM(Ux0hY@;Edtp6< zY=fq4(#q*L4gdL_)j>C$)D%WNXsZSBQ$49irPa*;4FX>v$Le}0wW~Cq#nLZ{D;$Q1 z`gg%!v3xk)%&O81Agqm}i_OBlqlr=?y&BYwY-D8>bf%iRrgtn{l%8;u>J~|AU~k= z*!R` zG2a=iWy+U$&P9_?A^i3!$=ix2fvTpEkKsUbEc7^j^RBxllAS*g^PW5>JK@S`Xmhmo zS=}|vE0x?!Lx>5qhAT{42sRz}kEM(716K5DKtFzIXDLktaUA+4YArMW7&&Ex#E1I zn;^HwbTrgbhp%^D^K@B#*? zxxA%rHM8|O{|hC49^gN|$a?`)U#GCL7XN1({GJ*b#Y1Bhvk{(4oN((BYqgEM~{U+j3rZ3>Hxv4Nl@usYjT~lGtPs z@*b5Mc1d$NnnPF+*Wf|zjuwhohJ~VM@;?xMDT;@^^#)B1kUEoT3C#tlQpE*if9YUH z0be7*7kFxxjZIXD6Zz9rx>=-8Q|V@repGn;0G!_If5h~N_0z?_>sW0_Br5`;TdgaA z)zCDxeM1yO!nVZBA6ghcd1+IBk6ALnvsK9Y8;Spbn~ z)8~(4%i@l|?&zYtkNuQe37;FnkF|@zzQ*oi@-Nbb(dt4oG>KhZ(1j*%^?5k(XsKP@ zlKq@UP@O>gjUiPUqYyzY!#DE~tJ}nLD6!RN`^xqwext!i>)9f*yJyw(qQ-1 zhE81BN`lVpx%ez1c=Eu8&L&fL6-N0gZ;tNIQS z{JAMJVKe@;8rT;z(hItGao+I?=YLN7PiP^z4x6j)k=R|8*KwrsJJFESIhOxX7CW3~ z^5>Ef-7i&EZQ|+t3S{#tJOp+&h4u94g1RkEDh}z`W&uQfVHEaDSJpS!GJo*A%&dcW znhT#z>OlhK3{Axe7*Sp>b|0o$ZS9`P-d0^!FYs5Rl0{d2JFcdCC_I;skA!-L-I_hFu?AGO-l&&2D6=EB_ z1@kXv^1`srxgu3^AQ~<2ey!3RdsS`J>j<}M?}A9(hQvtz_QpqAu$@&XvQ};8{|(Mc zb{Z?6;s3`Qvfml2o}dYn`$W`Y@X7@WpAPmL(~SMUY9Z*13L<7uS0x$Dp(VeA{v~|u z0L|`5GeBKo28kT?14kzW{QTrSBZkrD)3O{N}ji&iB&I)sgJk_589*8+dpQm8inYqMTJo6>?po5qkW`OqHwwuUqzUiWMb z;y2{SYJYEx`PfUib$5h@L}cdH_}8NuQ;pdJpv5zhn2zHt>=4jD z(U|>-BP=#>a`j<|OU)OF<#7VQTi29hMuRi(8qd;7R42nSBn%6YHww$aeuoOANz^nE zQ=$|XC%QuNzTQd~OdmSIM|?ntk_d2KgPcCvp6V6xv=OA?w`%VSOrs{iTq^3 zY4+)9tU*uEK0r2y*;qOD0BJa{ISFNF$SEe<%)}e4F;*TZ`gd#0n7BYKncIc1CU0X) zW`%IylKHvDoK9SWU$s^-9Z34frpyY>#iq=?n*C_`LT)B4HsofGHk;m*OS-e{BmCu^ zMNrluJmHk=!z$7GO>N|!7{Po-Gips2b`)4x{@;`ckqSxFCr^e5*R7!{u3$M8`_|jCirC!)Sri7a(@`uo-#V zN!_TAh*#Rh%^T&y1RF!!aLTLLpmWga;YoLM{3gDMd7MTSVgf64veD?h+*sS!cPKi4 zdo***ix5Y?0dJgG+^*c_W`A<5T^OEsiB}&9<-7B^BPVjt^NC4R#18mHx9`1{`Mb}} zT)i6=&8n-vP!{3PTYs};=C#KO`^z-BEFH*Zz|cWHtOw}eCG!BsvY!k`Qs+behn?4Qpw1ud z&ofM_tUlGBI6^q6c9u!EU6L-W{bYb1IrK5;x%vnpBfbShU@3EHMRRsmbN(A8{^0f< za{CUteFs|RZwL7;^EaHEIc5v}I_6SozSuQdQaU#?LDwTDTw@2NqA)1s=Vr#>b$Zp9 zuW~XVX`Bxd)GuJY>KPfWJLsgePC1=N3!x!HpP-jj^lMUcG>?F!8IzaY?pK*PZ!Bo6 z`?<_O@b5q=4Eg!?(vWW&cKkhw_T}azWu06!6w4LP5Bm6pB*9BwogfjT&P}zC&Cwvz#+V0@aB0p&nrM=2T*YCeU zp9awvUW#IQbN=K7(x*r~3Rk4d&*J9@IICXyMMCYVKn3WeW>O3ZT<8En>le6Zq=kb7 zf=?%xXU<5QUQDQ{>nA%shssl8Tzhgm1OZzKM>RAZ4 zMRVi{^8loeSY9dn+56cT0rbO|yJA##*}U@nhgF?s24|R3y-8OsA4&jtfuP^GpzXjQ zCCjRq4;W%0MxN&FuU+qNb+ihC~(JqMF!| zW$DrRI}C&uVK-qQjF|@@Jd1~R^u4L0Eqo6J@G*-&@!xga&Ss!~K_`8k%@r85IH`{@ zN~sNTM8lK0JA_Kd#gcwK2Jiy;Ua@3AJ|&wPWkHs78rn~MU$~S&?gC_@ZbP`CG?6=> z^%yA1nG@;%QMqqwS)~-5zC*l{)@Hfc@09=77-}x}KLHsQ)_ajzCA|`3dq4{uSM)*2 z$%XF#*(&~KX~GPmSSG7D&4**Ata}Ww)D6g~ZA+Q1h!p>$`K+UN>D^AZLZ6^WPJQU!fsDe8?`r zm$3w2Slkb`YHC{e4E35B(W;4QHhcw2)*i4`(-MWK2HX;Lu<|mt<+d;ExSK}>effp$ z3n`jRFqu_dNW0RjVyU**t?f3Q+Q@e#_?HniS8>Y^PvuzSJgLs(0b3mwRD9dcw=E3u z1|-ZQ)L%vV^jW&}mssp*L<`(mr8NI+?%PJ&+`T5Z{<_{qDN|QHX}BYJl$=rMl<>-_ zebxI>I>Ml|IqZ*u0xbT_95fy3vy0_~P5AJhFpml`D(f@dEW-Ee)ov^R(H z_ZuF4VgSRV00s;!hDV3;6SaR5Z-!%_D<=lb-NrtN31Zl=srWe!lx2tcXH8vCg)P5d zN@k-Z;NaH%3yEb9I-I)Xk1egQs`&R|bLuKK+G46djdLpKv5)JBtJ228GP%>i><}-e z1c#(EI4OOrk8{Nh-8;j_?_;M)-^Lt4sV)?H;+}mw-6~X@qdCsF1MN!wr-k`%;M4h^ zX5otrnR`DSFXIxu^wWAOof82sVyT06w8PU=Vt;5e_F32Me2J50B4 zAmZ(1N5S1Y0$w8efR?rFX^4LBu>A6$3i#64{#R?LmJ-7{Z>185uYwii zQQ1en#u`G1T9}H~kVpGZ&}wkIs>=RkQY#HPt5ze^hA)YyUA_2PE12@F6F%cLBI z#lgrQ*n6TLsI(PzYxP`j@|62u6E7(0`_#Yv*f6Po#>f@IW^x@jw11X%>4{FSoYV%g zYZ}p$ou(&dF{^#D{{-)VI$;?82ee(D|BG6?$+pH`@zRQDs5ei1Rt&9G@j_EE_v6lJ zHS!B6VpZTx@=F3uL4)~bgctNf|25+CD-3^-*V1=t@tA&yAwQmZzp6vsar<6stYUX? zv@ff95oC_zOsMvF38SV5%#ldd`gFOULVzgBYgFa=%sl4O@q2;c_o}V$HMBO&CjYla zUML7`0^jn7hLC^{p3D8880ys6APy9A`4 zihM&R3LAbF>^F4Wc1;+jJ%aTt1OuwGczo1uLwaF#Miflk@9j~JEy`iA`5Qp{|F^9A zlD9RycVVFw@U#sNi={neSlZEn{sZ_8KMUsLx5zEN{DJe)VLrw`#9Z7c7WL@=Xgu@g z;N>I%A$|pWcv!y=8NM}9=S#Fdvd9nK!#?WowqG%%{qp}+`@f=EGlE(qMBp|+*exV8 zW+G{`GQ1`t4pxS3Lf*gHa&`_H{T5~ItoxiTtMM+5uBqgCjotf1w*1;aUMlKaS~6*) zXt634^eut@g!Q0dEJ_qk4l14HZ-A^8u1guEJfG%ObNGm9t@LirvH||`j&kJ{^6`Xn zMfc}S*;IY7Y}`%?y@yk7s|2|m1+XO0kxHyAxcz)?Cd?)HRpBUl!vmP`Da#>NY@Zdo zS!dnN>?aS;cqqvDULoT_WqkLrjLMX5DCT)roVWdYEBvH@>Vx*X`>PYXkTT-0mU`Ph zjw1OhC4bnSeHsSD`0yTo$oA|<;i5cM>>nb~Ft9%Wn#7a-H;3_GTmMZk5nDg&H{VSg z%>Hw6-7fSLFgWtC7U=B%3^Bq=fWg562HzD12M(*z!d%QVP{g3GXgb_~PZ2J36^{Te z`()Nju*yp~ex>b;;*{`&?q4qdMAd12E!O5qR4n!e+42MMHLPv$)vR`htykLba>!!% z0hHx(uAnJ~kc=4Qt#{jA+5=48JHl10ti9a_!qM9!RdU1;4n^l{=QyUSD;G}g+yi?@ zLs_?a(S80aFnNuy;N8NrJQtB5UCu|j;N0jv7xA7amSct6_G*`UoP1>(vE>`R7m}}z zal2n*L$G6HW7VEU@6E=lE$j};-R^-fk6a~jyAPE^_l;HW;EEv}YOEsVJu>GTy;o72 z@KVl)VNWi735(UEQ4A!oS^KH5aRQ~oVfqRN&RE1SoHWt0MiLPk04FCc@RPs%>GnEgj# zn_cI6YU5qndoOq%*0yc$xS+ic7b`eAWGgW1FclcU-tha``xWQ!`PG?_i<8;-hd6Q? z+j^ifzO?l~b$lXM4{pY@1Rh%a1!#qAe$>@cLkGMQX*s?Hd)9L7Swk(8yPA?a-fi)E zI9n{|%%!Iiwlcj)@s`@p%Y;`O?q_G3wkl$Lqhq1XNSuk@cUHf%8dhyI;o`&BF-V0L zqLcAAuoJV1^;iau=DfTsObcv1^_xgk5| z4v`}fgar;75@c_J+*~RPnowX%*s!)C#G1z;2uB36+2ME|U}Ke77csa|HgiD&c0$N6 z#RTr$HKRJ(690rbJll(xq3Du(Y(LqQ-5tmivZkF1iU8WEIL*u}z&$16Z2|u3k^C7K zZsJ7Bbl=T>oqH_jV3dd#yUR`+^xoRn+x=EKfp?>!XR#_54a!O{y6@>|==prLvFBvl zspGsHlf>y9)wiE5jZ8W#5<8>Gw`9_3<6i`I>wxzM|}i zw*;9qnxRBbk)kHGc+DcM>T(TDh5r@9ej|`i5FY`0je6^ukku*fZhH`xae66(QiP_3 zI!0_BQL*fq(-T%>dpSx2R)IlxsE^5SX1)StG4o@gr}L8v_(U<$B!t!N zLcPUz;5ot$4`%jT;R226(TQ!E!i>Vx@Qc?Rkp!de?KO>|IDsZYYBJQj8-jo@Bo7n} zyWwO9SPY?vme5oA2@5)mX}4Nzse8#uJA546|er9cg3k?BX-fZame%_MU!i@1D$7VPGiphW#Re}8|M|&Yh z{x#Vf54F#hY!KfQ%eX|@L~aSQRU)Vg5ZNeT=QlOpcGlYTnp?a8m%0V-4NF$a>nWio|Q|H{&~zq@EY|kY4qJ zWVZanrvKu*f7Sy1DixSf;xcNyJXD}h$WhiG%}o9t9oWsovaToGy`Q7l0~}e5hP{nI z9fMDJA`05Fw$rj(6gGkNAcQOF|{n)_QpMTHzIiaEe- zN`V1_3^=})k23Pn#T9x|qmyC2(c}_vl&UNaTK^g*d7@ObQ1^|nA`7ADB6S%#`jfIY zKqNcw{n@im6|ysusZYH>!*dIZLr4uWUMj$vO&)1sH9%hYXt5$X{hn6h!YEm^^lji8 zzNn&o7audp?=S+`38kM?R^#6&SC%NY6>?I#ZiYT_crCxZwvfeAQmXU)E%`-|MPjKt zN;!17`{%R^vLYGdKGwj#;>iN+R4OzlN<|8I{Znzw$ODb0E_;8TDUTQGQN*XS-k-rK zLgt^ySIKXM!D;`DMtOK=_iQfKM?X%~8eG7~5Skpl4Yh)foDDxr&&Ghz5Wm;0n2jT7 z$J>b;HHI zmgaI#zD4#EmA$BM14+HNS|ok>=t3t7nDu|F`GyB%a^%WCYMxv5+<&ZjemE%kIb#G`s>I`tH4;u*|<0yqocPK&K7)WyKf* zbeHv@sS@#lr5{UTE{D{0Uw3R%ZFiH`)tntOx@q5*1|*R3GU>&1PLSARj3rZ4q|s?& zw51{I~# z`9dagJHQjKI^sPeBangPaJGrPcH?w9xB+HAy_ZI6_wt!_xdqch=>%MDn zOLX@R-T*k}Js!*avgUT)oc7W5k?096nHe>1rYh!{aV!nqkP#y&*B>>I(d+{nYlRq# z3DfyH?lxXKLZsdUDSH{vPBVB3-cMY%wUaj|Ukc}bx7`eNL&i`5Zn0FuhS0`XXb-J> z=KVgfJb1tUBz_z7?owO#mjUE``jh`r;k=hn59efVRU?^=FI_5pWvd%m|_@0X}yXZ?`$N9F-v_K9xA-rW{X4zF#?`D25 zlXa5N*c|m7Az!y#x_5FJFr&n z@rV;y@2*=`mLa3hGQa0dF2~KSPXBL4E;58Bk8wKvXPs<%ugf+%7!nF9A zLjaBu99w;gk?-bHQHkL4YnuO0z-Szc@hx{Ym&@JzgkB#>VlZ~bC*xD>d%oLrPMJrpyn7%NScRZ$D5?%T-6^FPv8BiiyHq%(Az|`>8S;Xqvob zn$@`jp9H8gK)EU7q!cudsr>>Q%_87`n^*w+M!pVNZ@A~glB@;At>}Jf5_jA~YzEIS zcSBwG(v?9B{v)_tZt4+S2#p)=|yE;eEEvFY&j;(wo?mF;|Eg0M;avJ~&d>HNbTMvi>6 z$$N@>7o)Bl4~SFjG$3nA)LT~XbiVnpq_cHxkAd8=JVk5Y;{533Q}FS83PY6J`U6~| zBvlvZPPl5?74vrH{g&5kjP)+zS3F9HH3In?0fU~skJ#E&8x~AkT zoF%n?9l$JqS6F~A@HTxjddQl9|Kq4ISfqbJNBk>`xtlU$YNFgmwt_*EH=)MsDJ@^Q z3tub>3Mf5>_>P6=UjUwl@%(Ki`R8*?plSVWx-~zA#WQ|op!CwEp)>U-eksIO!?&&L zlA^#iVOn#(EO+^B;FypeQ{;y2cn&FRKE~_|rck8jgwRGah3b;Jv_mv%M8$}kT?^VyW=1h*S5CW)|OUV*8+k|7D!O4vbcb@ z7IC|WfCARAsO0^8&$%ZH`u2I=KYl-2Gv_|*b*{5r=Q`ICG#O*Bd+UcGQ$;rek)FJD z*8WSWVK?4mKoq+%R^+WL1C;iJ;`EPuw2s}}QS0uSb+X8ia!hWTVsg;&82K=s*SL^h z8E@a@F$er6+3PI-IGxaXYD?UqiZN7tKfi8sDk1a3&DoKuw5TQ{Se{DXZi4B=6+q3! zt+6we{y9;p#A5!&NAv=(OFrf1-Hgxl=tr044IMeilHO-nZjHba%ZDi-9eeBrKZC>|aZpNW-B zPOJ`wmJOw|uAg_8cOg(%1U+j8+%(#09G}a(- zHh-b{hAHHw^i zoz3tCanvR&-%g`sBrrY}zZ$D(o%6&Y%5xVeXY8jk(M{P|!!ZxC{GmVp`OmwztlNq{ zeW`9ge1wUMS(b^9w&Hwo+!q)`ThLolpLb zm(BTME7yw<>79Q1$x44j>7i%O|L%9c3s{E0-Tk4tGlaRkauiBe-fT-zw*!K;DnAwyhjaq<5BT?}5+1-*z_u$-+jG)MbBh|M)R%CIzu7wXw+T43^E@fI5_IBRJ)jzv zCZ??L5HZIK^B;uGdO_#-Xu6=iXDj`(y`4;6db_SOVHUGy_2}5#RHBeosE_iLv30KC z2`OXNT)`7li6LZ&W=y^uJ|@@=P0b4XpCAzqsHa*`y*~`>flA4*+2nD4^88-Osl;Gv zw?NqTdzuCyHJz=uYi8$Ma6edOd*;sp^eTL#o{`W*T4JysuK+K_vGWAWL<`HWs7&bj zw9tZT*g4%6{=3gdl^AJDe9tfOJS93_%<%^xb4G`j6>CtLS~veYhwOKlWFY%NO|7M{ zu_Kvt3fxtU;S6uF{p9_ACEr(j_t@_t*!1OlvX`>oXic^8J=L3SzlURclkW??8TNZ5 zAD8l9sds^mIGm4Z{CBK3fr!NCU4*ZQ{TP=^T`@eof8G_FjvJh=*!Mz-uCCYx7)2pdB~`?Xk$dR`qApFguMq1x=#ww?g>cweOwEw*0! z5x0`Qqr3+6vt1lbCxWrlHD*_s)jVR!%@(>5s)S_%EpFy(jZOZUpWMl=oJ-c)`A*0j z|K|O{uASi&U^t)d!OiSPu>v^yi+K6PD+Vu5`&IvvsyiCH;pa#XmwcyZpYh(@+THbO zlr)@p(AtmU-jM?9Kk$PZw#{H9x{*;U)?l)vi8xLD6WPhM;Y3*i;q=2Mo>@@n%;Um{ zdQL<4Am6P;QV^RG$sDJ4G5xBQF^aid*I>L>2I{c}t+;140Bz&;*bx6x^bFpNbdU>< zo`W2QQEt3waB`G2a;-D(T?Q$%>|FjvVJSbOfHw(8MF|Vqx#iE-lP@5iP5KT4E%4lV zQ&9R)SF;0H`X%w%IkUbZws!sOE`l55wG}l)v2xr zNn5By?GM?z`3kXk5I@_FWAdj*?W=9lg9HU{Iycx4McH8(nELo>IGAnd^I!kUXkrWaRELCBo=MtJM(JQC9HJhs_U_jurO-=SbUMB`g zyr6u0$Im$cbwY_>HCdIgQ$@r@1Z=V4OTA;(8*U0l6YeOPO!ox9x%`FzlKA zi}OByFgDm(`jtBOQ0aTK=5%xyd?i(I=vA?jsYB%Zvcfo-oRqn>L^XAfksShju*WzK z+z)f;b{aF959+q*vpj%uolv*ERyGGsN?9`%)9*r4JvEOpqX&wrR6UR~l$-1zA7_%v zxcceX8AUrVM6^8wc(^8KXX3y4TNFQ;>G<+2rsD`zo*9v1%6PvGDtui3pAav3gSrP1 zp~`lV6>_CqkN+TMTdG$0A`w`13;_~k3c|%XcehUK_N-Q{BU7&2J;p{@$ zgr4O7Ativ|al$HZI%W(Fk#XFa^gTON{q4K;fr?M* zptph=x|4dAg%A9Fq-Hns0^Pm;P4!>2s-OMH~B&f3hmJd1`4 z_9H*%%-8wLjXOltb$R8_^WIfD7AfT&&YjKCvd!h|%i1$TGI~qKk=IUf)?yT38deyh zG?E!!kAX*Tza3!B&(SE&lO+s)y+U$~3%g@P4gEP_}oE>}d+-^qgwQYTe zsi!|SeF^Cl{6*Z3>VNHL79GP1Gxxi#e(VEOmn|YzG*q!&B9?wKn}j#2nh|CnFdT;h zFq?fx?3K)jXZ;GMse+en+)6(#s<;(4?smpVlVkDc`*i`Vr}O5090p$ngV9ZA7*FAC znw$O1+;kf6BB$;&gSgWmSGJT-U$i5+o|~eaW}mF_H#Efa%srs`n%~+_)fyy(n$Rq6 zm1*^)bnxmCNNK!;Xyh$Uf$&PvT4md;r!o_|#&wZC>k;$zYI$4W!|P%fuXCT!JvzHz zFdXSOdA@D(mp9lB4mhyMp79XvSZZ_M=I7po&EP%&CS;R|CscaDgJj4kYJxXGa5E4r z17f<*i!Vg3U=hhT+MIWaJ&{6<NY*=Co+6=+Nn$SzaFr9A1*D^wyqzQ;LT7C68JEUXOuzwF;oELxG&-Fc< z>$iTcVZCzM{msvJlFj!kKi~WNdTPtD+r0+PI4gQr~YA|kr^Njd!( z?I}#F+@A7stt$p{@@OVTVsrn*p1fG8mg0RMm{H#HV~z4&?`&12y@H~->qcvCRq30*n?d3RqEXS5%;b5IxWM!-YZNVy-%OPFq^TDip1IL z9eXTe|1C52W_;A?#pDH{jt}ZZJO_WV)0q)lt^v89adT$D{SWI+onpP6C{*=lkFJlO z$yIq^>~e#gP2S12#S}GaZGE6h{lz4J4z%(j!n?>~ieI$CmK&r9>vl9R)k0z~zB?$(?v=a3d%|Mtir zoPHJ(VqK<81(Q|J-o-T>)f9nzH;e0`6F{)ttVcZhBQW*?o&pZwC-mXpX&M&v#n-^# z0r=`~dwe1FsaH!?WiNbvz=QxH$NI_l9FV-)CV$6I{zbb-fgycxb~4iYJjkOJwks5To(`B?CaHq8 zU+m5LHaI($Nl7PeLb~3&>k~R?@81{ndO=8Rn~__Hzn{eztUoOf-yO+R4*}d&R|NyLl`EZjq8pqg)jSe9sXv?Wlsp(}&XThr)~Zpb zcz>iY5`4{c{-scmr0RakeUZ)GA9fqLnR?aOHT=Nle%<7LIb{4mpEZb?chx`~p>Q)4 zeI3fwbm5ibt`_4P<<6#L3*OwA`Fw(aWhV4_zB8Y<$w2*$gXvNA;HcXgJEUj*cJ~L$ zlmX(l&Q&kcyd__Ad$RZ95R0?Sh->Jmxhd)%cwy|vJanP?iNfv0R9=gtS$spXpG86W zq{>&K?(ntOA5#x|A%199m&DxpAF4l<8;59ZX?N5jy}8|7ig$V~Y6>!q@$bOqJ8(Ci zZl}bnG!1A>_!+rPICNR)``Jf7hTeU{%QAWtJf6E{$40(4+3zZSGb^X`M;rvyORl53 zFq}b~1`Hd#wr8bWN|wA{Sqj3LG0K7@33ItE`(3j1;LCkO6K1Au;$oV}%FumJdQB2H zcQRR=trqYHfZWP@8}W799gE;?C?*)RW-n1YtZED+xf?>rFy8hkF`|2_G$<7u0Y=P* z_QTxgIj(r{=1Is1S%{-?Imfzg>TntGn~fy+0qDAXuthL$@7_r?%L1$F{XUo2R+U>_ zNc~9+Qmg9&hDxjJciK@c$vu#hZzZ32gr4;syX*aMv#EP2JT7feUs3e{;9nDsV49_W zGUs=%$W7jDuTx4Za+Q-b^=n1KJ=o+u_)o3Kw(v<>rklL}RL^Gg7dd6;gk;XoTO@cg zBlgl8<@i0Eu#QaKLc}RI{ma1ebsv_Wk@5vty3a4kY1;fne*TO9V}6>v!p~SvM%(-U zqJ}I_f{dS-U=`8K6(wWLd5{&qOE(SiV#e?TyC6Hs-Ru>tHXNlYBTp5nY@2y<6cOO4 zUUBPhf@2athLId|bc&+m3i%WJ7A=3v@9feYkUaO<`GN;^KlTB|%AmGw!nU7l)?3tW z8XOQgjV5Bn)b^3zk1JKq=#pec?5|^Tj3nZK)`ydSou9u_`H!R>cB2~P6M6HTWFRlL zq`G&H=*#`w@z@W(oF0EqgXd2s_A=eyAQwuZ5e8rYz!KaCzh#E;3Lw$|x1x=kJM$8& zaZt5qfNLZb;x8MDIb@7lDd&~!^Y$+CGP8(jgOqx>+>jf#%4-xIH z;%U#UH=jGhIhHi68CII%&NRWD*~4-h!dNrI3A-kTlN>}$4|nDyzO)?w2FeWYg>Tbp z^(+2bYIBm}8usvBE_x$}kLUhj@Nq*VxSKtqZ9t&@^gwK&gv!Nn*^R(WnycHEykUr1O9uSnx? zI|-UGwmuR@`3V(D@ayZA$GbK+B3un#F(Tmph)n##h}39A3`a^E-G)yG*MIK9sBxgmp@aANCWT z9tI=Tk8iDD<;U@@*gHOZ)|gCner4MYljvEV>DgZI*V}BDul3n;$XA1I1F99n5xyUv zF8u8Et~(&JX)jaF{bR&b=B(X@UdvpShj}HWPM~i0Y66sMc7))GuG;{Am-nylM$&iR z0}`~L6CDqljNVix9TiphZS|uqWAaMtrGm8V`P8D1Z`+J1zX$*5Amgc|Mbh&ntAaG6 zZmzkBwHG~tNInmVZF%%Tr(z~NG7pgm02>XG5kk*RQBuwBYD9r0X>Zb|nE+`K@3C)b zY69eWwCyx9`?|95f(7>O%PoqA0gZVO>pm~O`2K6xu}_b3kF)Fe3<$`+>-ZF6((`D_ zJeIZarFHyIz73ViFFo4n-MH4DHc+Ym5>~sZ)Z1UP(*}7pCXlF9gyoF^9{9wfP<5U= zNoW!l;|0v2H#?k#qO!12%={TrDkWwGsqgsg!=p(};UF&x z1Mt24&9RyXKP1*^Jkli9=GBjN_&SKMUi41p%KW5x)nU`82ItO|VeEd)d!Afj*Q*~p zKtJ)KjuH0!cU$Vm9vX-Z;6V*LLOa78dg02Coq4yL{5x#^9seQ!Y&!5SXMO?sYm)Dx z3refuvQHz3K9$x6WzZdhU3QjEActlJKLWwu`EO#%1o!xCOl^ZAcRB1z&87w2bW_Q+ zs9vQsk?g)lmdRd{?lHJJH^1=%2+Lvq{=xSTrfITpzwr03zAyV)fM(RqV~5t?cgf%J zQf@yp^yD!jgpjQ9YkD24DII^)>KIBw$3qI`+bq+}%-rccsVqOQTL?04c!*BN{$N%q z;-iK_?Ov$fx0z2`rPY!2UH&R{8YgLi!I{se3DmcaA)H3%M3S&&oK=ygQ!tRdj z&&;ovJx?nm{jAnx1fF?m_BKUiM*RIU+xvHTUs+hU&_CZwaZ@>xtRTjoa4$K@2hBjV zczc=0YG?{_(PH^*%OrEmDIl zi_}qMeNMw3|8-)2(7A0T!K%?+i510U2+pkq>c1IGZ}N^qkAlx<{m-}F2diaVYhwQe zajW$dn*}#Hb|oVKfaP7@O|ODZxs0m=q0FeC>$OO+f`Sj(BBu}p~mV#PKO(ybSD6zNS%tNt3 z5`yHaoHZ1kBHD~^)>ugL%A*eNebC5>8V&?}`Kpl7z85E}m>FPY*GHM&@AArKX!03m z$>~f^@eN8uoE@$EZ@A=}+|}S03`B`*YRNHJH{DV=aGjeL3r?_Jg z{Fl@bUNo28cR)=f?Ov-Q%#vcTgJ+|^Gq9KfkvdvOK3ceMMJm@gjbA4d8kLxdqEOg< z331C^iT4L!(Nl1kg3sm(uCoOZV8aez@XgM8cw2#B=ovjbI7?2GAS1$T7@~Qvewk!T zsqe%1dC=Fk9zAwo`~^$Ht0y7U$$5zShIb*?>IaC$NKZ%k#c%8UJ;UhhJHr{An!APJAYKM9E~!J5pRpm89I{A+04N8z%) z8@4323qERuOdL+U~CAf3D_BTws212 z7$>yuL*D9;o7#z~Q)buA%&zqCpLKjEw?5o;p`(VE?B?&_f$Ku4!66<8=N-zJhss)N z;my=0R$|SFYb1QB^`Yj~g%BlgHtZ7~jeYmwC85+I9XEkM)3>CxywYZ@*6hM`; z}*zzVfGZ0p^9EY)i<8c7pTJ? zF#)5dll>bZI`|JvF+|*E@856lr~0Zu;=KX*VHbKBP7E(IY1T=jlln1{Q5$@v4DY5* zv9CO(w@wt6!eu+xWjAcDY-RCG`1C2+^ku5q*!L4%dDxrRuyvtoeW3{e#9=1jIP+g6 zfQDvt;6?~p<51n*H*i;H3m+=A7#7Tae(Sdo_=EuOt zKTU;9^dQODU;8~X8O+`DON(ggz=}HmU^4#>#4>ZTyJ+S=WFB%pd1v`~+msgqsHF1a zP%7Vpu-aOT`18jg3RZ*fU4k0vEdErtjlt(%r{IpW>#_YK&w2LGkAVPlC&b*UI6NX=5 zR^YR5)+Un;sIy;FsZTl%vGkVmY^x1+Kr@~BDVu^39N*%NJ2)7q{1|<%S#M>xerjgo zOc;5ZiT{lj0XX>vpWbDJ-5r!E+q2F?1rn!x_#8{Dl*OQ_C3r>TWdbRUx{y0%fBXZD z{C!lWHrLb!|IWy-{j!n&iEVI{-{9W2%;Aw_>N4&7@_Qp(DkAQ!B@(7^l80&zisv|t zKpFyd=zY|IsmSr^V;kI$oJaORxg8rxKW+0bIp+`~Wxtcc#@g9N))m&yFyN>1v65ri zvokZgnmRDY_GUOUvkO`K4*moFSJAuFxqFoM?##^`SlFjS^fI#ht(x+8jh>(LNSnyV zV(b?9k1HP(1#wt3=eS9@uaq@R_J^pu&e%2B=e2T?CU^<8c;UMuc4f? zb&Sh0HIS82nZEM0+>15}t-5l`ceUFRJJRq8@@E!cnqpz(o=I3MO(&a`i_Ig_wHb2( z?>}w0t@lbVDC#ztv`oLEXLPi+4j^W;a%cJ-uNbU#alMBl+u)hlBPyQN8*sk{5+^w| zsBkyzAfY2==5O!)wqaW-33@jQJg5Bt(mm?7u?35(T^!9kFq>YXL?*5@e9Ioy%ZL-+ z;mbFqjb#Lm_4v$mVm9!0lv-x&_|>Wq`8>o}8&*`1GBp&gMO>7S71x3kcqN>EVl^<3 zF`d6f-op0aUGba*U16W;9#-qNdx=$`r0fZmj=Dx=KkPnHFTfBNzA{p|e;FOf zDS}RDi#iiJ(Tgo#kBAJJyw85g7#Qu%9wkaVy++GAby=RyDrj5*8jy^z_EHf75N`Tx zvBDo#0<12-Uk!PretX}SRbTd6q@gW94w{JHXBATuX>o)K6UOvIVJ~fc)Jcy`FH-k# zW`C66NY2)fG;WWd#qoUN6nk}h7)6on_mz+tG0=~@N6I5FS}yunqs`aD%a3p`n6>kU$Z*l@Tdl@3k_u(?+Jb z7to6f<1fST@H^F0)HNC7&vD;1U1AI=rP-u^z3nkv>&Ka4`1|K}myzCJC^I$4Q1x3)G<01d9+7NeOd=%I5hwXm2Gd*{uOkpn8PF`^HQ#a( zAW(ymjj~R^ApZn2YmK-5D)ix27*xbAN~Z-|Iw2UOY?qu$z;AKMBK01ijs>VF?~?-A zc2T{R%;NBat25!kTt{v9q_WI;YpV3K+g5C~VVetuJ|y$BZ^fMY75DHvz+4Q`q3&FT z=pH0}fXk-S_ykFum+tDL1NCJ722C6N$r{2XFe1uvo4`o zCwmx(nJSb{=jI%1r@cQbF1<*ng_!1FXDu`l)<1%ZHbFMazwlJSdRwmbr_FQHQ^{mNj|_QgE4n%`TDW_ojY1G!(SZe53omsFe-~Y zLeQD7yKiD2Z$wq(Hp8Mp%$`hi&-je(zg&ELr*R6=%!lR5oSmRN1|HCMq0j~{Zs$#b z&$a&NEqwa(-ExNE|zkr92R)Q^MxK0tpq|-JgVag|(in0Hq0gPnMCAbdD_z@YS zMJA#pvBinFY4L|5yVvUh!d;}n%zg!^>fig^HESz7p3d^#vd^F2XRpo8Orf-9tzp5{ zE%eqH{Tl<0(K7LK85(6zqNOL=}nz<&id2qb4vw@eMKz(c^W&d=xEqf)IL3UCN zfsPRu5$~-ek~yHmih{AVZp-dBMztXCHf;C$QMs>{_%6Fs^^B*uWF?y9N6HfES8LM@ zoiP`~4YH~*F|n|?&b?(l4aquI*w_E$)`ysoOb^8!D&%5Aq7M&MZR5sNPmwUUFCKu- z8)M!cB^)s}^b`Xlx$k1~q-?OnzhDttO7I>Vdo02GZE!Tf#Wpy`JFD5ellQAjoIR(= zXH&NS8ua;q7;>(sf98Gr!oKic_$Bb_o+fyU`@mb$4e$R989+X2fvh07%m&92Y_h>B z@BU}L2>K8obPH2e-}`mLHg(%6L*CFSO?g~3azc-I84A?HG=vE``AfMQ!N=lY+>kTM$YspAIbVo_CANrNi zAMy75l?fMeO8-vXmrys0+iml<__1q1; z`?Tr1Q!4BcSxV2s?!%^sVW(8sbboJpPNYylq(N?}L2hXdxuq7lP?;K$-c)9GEBA_? z`PPR&(y&d_;Qwv>7|4f9?xz^t44>6^ARorUi1t=HkdsZgdmwXzcB|>6hV%~8cZGgs zu%XcJOR6a59sL(Oq%YFSUwJ_n%Gy20kJUi`&W~;L_C9R$YM>vtu^Q+tezXSqs$6uN zx5kgwKz~0My~=yikJdo{C>OobyHC+}pucHj8R(Ra)IcBMM}|vEyz7XTC{{^syt@bc zX`}ST@CrTtSU+t#sxhx1GB?%_81|&v!uOqtNBcg zFHuU0l+^g671UXg8jt9ZJu6bvp5nB z6AJ^H&F(F)P)FGP*+za+x5#9Ge?Irwe-hioq|>RC{*^g~%)ES&b9<7zQs=SZ#jYh? zSm`;nN>yw%(T0EOBnN7e=%q}v#aIa64HQfl{P`xg5kx=hH{p^~oZEKrq5Jh;J|!J& zp-WeqZv;V{`TZ%3jUTFY=8M6LBGoB@*pz7cJI2$kBod;TS%omRI= zDs%s~33^3)oTd;V3}>bX1xPVW`$^N^t!;ic->XvvvJaB=4zYzXQ5bRO>ExmOEXv1b zmanI@IQ>=Rwn+LZJnfER&4-EU;U8dR1Rj6T8%cV&@|`)CM$=1F!^HHE53q8_V;%qm z_j{!V+!+?!t=HdXeF*8N@5qAXzGj9z6u zH6NG@eTy!qaRBsf$Gg-uy$0!t#|fN3KpkDq4!~!B|MMaH`H!$o{S}|R^%eR^lNXD} zZrT*R$-HI1Xv4xG=E4PtW@MH?C{ra73THlbT4!&^5{SCbd&lfmHWWrz!cQlz{`BK` zaSG?QlEu#S}z1OzWfm3<|cJM6MTmy&w7opCn3Sfk~mU zrdl&GPT^U`Zl*eHV{tQ{Ty2_b6RU#W<t2z+&w`MlKs z9Be;Nvf+ll9y;|e0guJx6=XK8Utxn>0fFRU%!&OFO zCbaBe1Jz9>lM!Mm?xznJhgY%XLIJ$xCma38T)KBQi4ytY4QFSK7KOwnJoz(QsKftS zm|^u6A-VfCy~eU{z)K=2_9c0QmDSaxUqO1u3gmNq|2)(*o5u=`HG%|m2`R%Gch#I9 zH+IgMY+sh(u};NA3_@C`S2ee4L`hew9e0r!?ig)yG|3b+pErEbxh7q;v9_3a^< zbG7?EOamk*l`NFUwi$Xa?~j@sLY0Lfd(c7}|KHP#Eq~~_J&x>C(P~7!a_#lmKSxK> z4;yMIoW|g;fd*V53JICm9-AuI&QUkfwcH-7VW>IJ8#y#M^s0}JWTuR%ao;xT3&`Cu zt3@t(SN&PtcmvxslBt_S(>1WXyZ!&rH<=#JZBYyB5@*c;+P&T{Ki1iKEr$_0EW5nn zZ%~bP=2c9;rR-TaW}x9odO|=&8dt*adlf1ojP3N^+hnq%8x*_7;dk4VTO>Y3rK%nvNV1LM><Yd(7 z0gxFnjx^xuTRM9vJE}h)4y3=#%&_m{2JLNOUdtB)fRj9i1z=X>5d_jUmesak7@vm7 zk~VcXeT!ar)3<2&!evdBmKEaMmQP|d{rLSvPny1`*8Mk*wjSi8Ha($G$4Dkx!Bh6x zrM0>od)s+qCk4U|0ZSwbOU)N!J24Y2Rld>6H`-fe^NpU=*k!~H(-TJLYJwTeLJCm0 z65GLgdtShMMxeHR!bqBBDfPR8&t0Y1(I$3*V$UGf5SbG* z1)o#BDOFV4{6YWPvUVsTlk;G5B1R82t0F@v5^|5{rK&bFbzFgDma)xY2Pzue=Y?PO z=jR06aGXgA;m6ue!F^*FC@D2iv`-kV-yRGmpEbFr zmK0&i!@JN_b9PZLl-|Y-9Q}|vBdMcUWwVQkFqSqWJ5pC38Ag2(+5= z?OCpnT@(if*x+4RaiY7^v)AyYOlR|(Yp+-3-|wmX4{*i|VA(^ciOYvp$a4heVj6fH zmb2#0nFghEKe62vh)56|UKy59%vOSCMFC|F$mk7xZ9l8n%sZcys)Ed4p#|m7%Iq`n za5A$C6Cdn>hXgV)IpgEU@M9qdyl;?&M^pS`>5UD%E{EXLQTN6QogumWn$(wQV?AFR z>$#SHn-`Dh{K(@TK6db|(-qEF`0KMy2-VLnICR#x`RRAstP+0ukDYY{Tv*-oSm7{Z zg^C{j!pCa*a+=Qmb}59@!W=!etyoL@TAH^Tyt&}L=p=thX|u`voPa>8uqSLWh`awr zovjSLcGwMAa>{&{tv#_!McjFkKe2*&&OB?+0s8oU(ollr9zNx0GhiDwW6@!vv-E<( z%C$FL5J?Zv+D$Ym+tM>JtC3hu(ByP#R@J%HN5L*A@`s_AcDgBA-~J`W9^y|?T^`lp zr{aQw%C$F-qszCRW;R~$;U&;T_w?W+I(?OYmm386VytB~Zm)B%Ix6;ibN-{~zVw3r z*g(%rV`|hb?05odwiiF57yVZO@@n0`^Kgz1CNxuQkjAke$KqUEUdvRNJ=R)<#t$Ru zpN|&mG!5wp8+Bs^-`+39*_X~-n_YCko(JqsGEceFcdC$X$TxuR$aGUC;{HvsiOk{r zEyg@jzX*Dbl0xM?UNWUHb$+3D={AaGW*{~2HYbwz;99?x{#F7gl0L-T9bh4lF+Bx~ z(t{|khL-2DPAH099+^Ic(-?d1ZN={Sdmx{F9!XCr!s(f}2B)bFlL`a$C1IcnA}?8- z_y}sRORG9PSW_F<0yh@%`tw7rGmgVkWi$M3ukI;E{revS-$l1ry_MRIJ4$a=9k@If=kzvMS2V+qT>UxhwDc_!x>w2q`Yy};l zU-<;!zcozL8TDhyJGyo{mcigJ?u;~l&@Ym|LP+p#LX$mprqscV2MOIrnrY84i^7Hg{3-j6*s#aS zOdu+OZ{v-5FCsn96T}T?b799HdaW-_nj!95jD)%kx;(U&H_2psH@$rTy=2!Q4pLZy zEG#D(0w`?8>5_60a5(d4n25arXMu#XWvre~kg{z_wl@?0OTY5xCj~d#@#Q!O#J+|}rI-^=W57Tv<&gqh_#naC(hrs^T(y4D z%BJ{hAa+)5`fl|Xmn|XpHg!2RT*J*33;U(0BusJ*K6X=b<52cKRQCX(ON1kQ&y z5pw%yqjqVZb&8g@__*C0pHb?*5y9w5m8RNQnd!q`m{Z>GncF@z<Gf25V;5$4_O zWmL#VsC~X5)IY^uL~PjoQ!!Ca@)FZ#zei|u#X)2+e8=qZY#tbfQfE$jk^N-5;p3c3 ztlv@?~$YA zy!2Cq&l4i)TP8C(*w^ufhtZj@nnSb-NWDv9TGXAqPAf-jfG!>NnwaL*|G@iQ4A~%z z4vzz%xwB^YueIBH1416s6QUAJ|$E^KfW4g{_Z*!zBY z6U6gxnxKZ<2Dzwf?e;Wf1E#)&do_iEM*fca2i89&L6xFd-p8#rsi@a|`}x?RHhsXX zVK%j(t>Iqst7{8Y-yym5K@Fy2s@5d1`zz^(*?>A4vRWnI=*{h@D^&G?zIGUtvjuOdz4+ zH)d>J{HVTJ+ZujFT0#6Ji$*F4h#qtp-0YUeL=XC1n>o;C&Fff1`qD9^x0rNG&+2qo z6Z@KX8BONA7uLrH52ZfTm4s}j6J)N%S2vpSa^34Y{@v+?U!Fd|VyIa7$3JTz&fyp0 z`qva26$!5GJlOgPYl(mIaqB{7X{e}fTtQ*1kiSJS%0%!OCM5WDzpbLjUdPjw=#S2#&dJ&%u^ZnUDO*=txq8+%@^!Coytfwh_7{uEI$ZSysiA{8 z$Zk9y+Y5lMqs}JpW{l6aM!G7aeU9UdT<2NGLi{bP)=^C zxj=4sV`tZvaj;y(fco?t)w&xxxUJNye`<`eHU0z3INXA4pjKTC}V zW&Y&1{k8rGo!sqtd4V%$iyZQ1u^-~Te#vd}tIv|cBoRvSmFtmGP*m)!m z`NIK5heh*$<`}eCVn3?iTNp2`MP4!S1J;0yN}hJRj(Bqc)UVc?KLtsfKCh$CZ?+ z&J#|{oyT!n-T|B2tT)OJj-(ruTj#sIzVy^@q}bI+e=GDXV0xebR?n7nOaV7Yj+Zm8 z_dlQBw1WJo6UY$`Zi%aCZaM!2ysLQJ$FEVmmotUMa0|qFn)at0IoAV^Kp7$lY6@ph zp{xa{dw-DrFx{aBL(Q66(P5z5ml5X;^{ed3pKfRZY8}=E7iJr!ylv*YS`R0S4*&<$XPo4Togx}n!O>xwas3k<`9bd zbUfFGzlWA-8V>X;k@UglQSYV5^k%~>LMa;iH*5qWI<8Y3d>hL|BC_>{%XrKg*|;P2 zUPKQhd%dkU@IV69IkK}lzc_v*ocGvQxo`|jJg2)@er#wh9Bn*ibv&v0A5EWCB!8{n zjHatmI50I7p3VsSnQk+(iH4f}?F{P-Dg_ zcC>di#~IqNv2WmSa+xN`%!8=u0#g(A^nSbF^1zLd5vmpo=8z>a{WT5ZS9z$E21`Pt z-Z22tZUx#3iWs(*VC8Fbw`azltdYf3&4)0ttq~;hYbJRAP)s^)W{7Ks9$f*$6b-Ei z00^Q^!_Vc<;gkK^wp68_(43>tM*V=BakROaFeR;0^;2RQQK;Y`{tSWMY2hr}Hz>Z@ zbgeC+$x4iQ%x_&TMx8oxt^p1>6ROxmd*dv4rX|-j(s6H}{iP58q+#1ehOpr$hYRv$ z`jftBxHBPixa`BPrJ2x*V$;~I=KbBMn=+!j$YW?Pgu0aVFj3)dOl%%illdvnGNU5x zO|0Fnk0TF7GRcy))LG@+(Z=*diD`3QO=D+O>d6wZMtHK(wLQXN`BJUB=CNr}cO#{o zqzg=mcM2v=Uti;g^-u1|cN7foLwYiO@Vrmt}~N*RFZbNE16NBdPtJzurc zA!9EsnHCAYS(WUZY{2Ujam6ij6L4%E786oJ+BNRTUd7zQ{3e+!k0Tn!`{^%2|= z$&A5%*Rgr1-%oE!?BEg7zD-3?!Hh@*i#qilaF)q#WuL+_wti{Jh4>3o^8Knbb6FmZ zgjv^Du+7zGuFu1YOATBSKp2f!Rm8R8R%Dn$27QVNm6gFKdwz!D(uZ+vXO;NioaH$S zjCd7~9`)pkBJrXkQNADLmp!7tyO!+)*QPB;Yv*X*=SUGBIlRf-Duy45a(wfiA^1_; zQ;1IV()08F_u27aL^DF>|J+Q-?dsi9^?utQlt0;T@*`-i2y<>yWy29{#TT z)z{CRdv9p>KE|)AVXvgnLa8AoG-g^b+^oVqbC{uT(l^p_H-+7)C9^?% zfA13<1!1d!%$hb~-Ujg?K?x;N%6nDm7QOd>X@)1sATH`nbSj*-ZDe89bm2gN!=fMN zRDdm-?l+jwmyIYbad<2lUesq)ERM2uRAk3TATBl#>PS!Z~Z1~ zYuuc7^-r6{4QH?`BD2eIxBHBZ24jZA+@_g?RK5laAxUPIR%6i9K}R368<2wGe50NY z1{weg}Ee+G}F$fl$Us)&PMLXhW)Y}Vvqg0{y zv5ctt`Si%`&ORK0UG0atcN@d`%w;jH!o|x~MGejWK!ojSL%#LUQ-(f^n8QkP6R}~U zBcLOH$kZ)}9mFQiyKFE1g12T2N;~tETofCYo>u_?n*Ieua1fWWJD!CDzMbK8bwT*%|@j|PpP1CP2COhmKc76L`N2B?^66tRcwD! znd`paj(Ff0?TkCUw~=>lHwYqcAp4f)?85XE3^VTZJ{ik~nYeL|`rx?3D4#9okLdF$ z70U2$)mupvWJ1cXu<6%4QSVeWJ>%!gL)j6O1YulndFCzM(kl$-hn_TrgsnoS@d(b| z`WugCpPE5vF;Wlr(nmbCHLllh6^6+8#T|+`zrTnRdhO@O3p2rRC58W)&|Jm$O8 z_>c(~JB|G)mo^d-Oo#<~QZ4T+XNf27C)hC|w_YPf(R3A0Ly^)5%apla#mSO29C2^h z1T)Ag5Na#WiS8wdK;mfTi{Cv#OJ!YIS+>IG zC8!V*wiAbao6er`5_Oip$lMwLwvEH3z1UmIY^Z!fh35V%%Y$JreT&YS|hd}^-l77 z^3lz-XW-nNYd-NVA@8hOA5IuU-xZvhMLI8psryN4$e6u>QD=Q*$C#Q7M)Z!H_5N~_ zO?X90Fo_$F3dBkw?YZyd8`O6mj1O|rVP-rqnmhL$p*#BnFvolp9UL$Qd|Ac2j?%V} z^?oKb2o^(ItjRf%PPVy$Y*J&Jnfm$=*mW5Mk*d)$vX9*Fau>MB*&NBz1 zyxK`9ecK)Um4MYEe#_r1?~JDB-%qfkDw6(Bi|*d>!mr87G#&{Gy3E9Et*Bh8D(6gK z(T(&MUHq~yUksG+ibH)W0tZ}Ca<$A|&RZUk^I&py!XTaNmX?`$e#<_o!+`r0OWJ9? znUcMl5!MQ-`qV8TjS0ujMjb_<;B%UbWbV$5?MmiRHf!VThCbhJ=!Nu16(;b+Wz48D zG`|@IYv2UNCCk-Zw_yX5ULIyBW#c`Jn7_ZHbuzrJ-_--^+#pP|B8EN{%1e(Qk_zRg z#}}qT1!>+=LjBTtsZf92cXRSJ(nv#B5PG0%MA6?h6SxSqcz>ZE3u#bq5$60+e#XlZ z%Vwd7(3q_dTcx=G=ZS(qVg!I8AY_IF` zulEQE0dUdU>)++W;iG(gd;MlVp}k(4zW%k>@8~Y}S$FClzf61mzx_Dx4IJvgjHeS- zm$cHCZ4t>Sj8+{Al;#4(3V4SD2U#QFrd|<-{_yn|arr={SU(#B45*;TkFI}8ETusF zaGxM?lE3BKX!m)ya8?*ishpB|*jIp$omRg>#rn^}d~RAH_&3pFa6WxV3ZqF~n>!O~ zffG&=cnRZI7mLn~d@S_!jM+{SdWuS?OZbZ=-YO#W$i|U1I?VTY{tJn@fxFyrNwqV7 z18`ER3G+RO!CPZq?03@I)l)xX53xAmc@AG+C;niyA?Q%|@8`@@dHYl)a!S(7(#)tn z)%fCd8h;6Jry8AbYj!iTtbi;c^CRCdQp=I$il|ZqR_{jRt=Y5eTMd=G6y-rO}9xf)!g^~16py_acN1#F~?0E>z z90uP41`G^@X^AUJrtMFJOQz+^#9I>M{AisOhv897=3D338oqhgdbdv2AHDz0_6BUS=m zVt9eGbeFqBJc}Lu%w^mwN`=Qs3$eUw?B}zJ>eg*_mbTa%`R@I0yQ=RPXxGyu_j5#Q zWWVg}{n#~gcVT{NQs(BMmyqA0H$$nKz}z>Z`B$)l^RF%`os{`rUbGSc9cTXaphO2l z6L3nO3v^Ge@Sfh+I~Gzpv3Y+a2r3g-mt4UPr>n&>P^GKS?A)-Lo1)Mj1;>+x-e_iJm;p|E7UgUpr_nidRJeGzq#fF_|d7&0# zxJeceEgu+;F#FgDF<>s}%?qxr+!;!Ry5i5_fOU2PV%k7+Df44yUwdAp zy+xC+CKE2fE?Aq8lL>V-KF?$riy5MLz)21zyIfQ95d3b)OhEW=@T}1VWY%TEfr6-W z4u*reqH@CdE0ACQW{%$DHSfr1X6g|~aNHg9*F=;IsDNVw0yzEW3g2#(nsS^`yYgJ8SkQm-~MQKs+?W+R<*Sgi~s zHff?w-d`80+%Rj^a`mg@H7qh0M1vnss(jU%e+@C_4Aq1h?frO~-b;x7+1 zLNc{2Zo_I8p?QJn-miMga|}y2=q6feZ0TI@ODbCn1`ssZHTmdU!0m3r_$t}-&+MGp zk;p3M@bAAziP}cZ?jz+%AI6ergIAc7XX1DFbA*VrVlMPoEta3a#X;O*WjXX16{8=+K!fSkgu?@8{(VF;j{6Q3HC1p6#z?xh@O`qrf#mcB`@7l_cTu7+l2{@91Y%Lh z9L2z$8Ahbg!Wy~&pcWUK7-5DO=`SpE%)u2rORVqcZhXdcyl zxaMKfmmv;ANu*3;SzRH_dre}6a2trPqHT>3^+q*}Z~^!NXhT!{O=haF5=9givV4fM z2`aG-7a8|Jod5Q-ID3R&zx}Q<-Z#{q{jSgII^wtQw<@*S16n=9wyN&71>ihd&<9d= z_x&&jb?m$Y%I4d$LS7s9AHOWJ`pla?U3-H&4P6u7+n{;rhY{!&OcRh3cJY#L1Kl*uGlq$GR+4(`&N7WJ~Sno080V>u{?`9H-_Eke$*>#--x|oI%+k#krOsDmtc@}r8Jk&Mcg+ZX# zE|fKo_%YLx-x2!l7;EMSs+b-8w|bXznYYWiXbs_2yPOMO;J=n#&avy*KZgeitW|*h z0}`Tgb*zk93g)5gx%v8MpVP%E^tAqxXKaAoyF@$yWsJX0#-j^quDnSA^!EYy@GAz8 za3ilI$FIEp1X_hjyh!UAKmg{V)?Pq7U*`_V1BTW94xmrdKw{6J__AJ@U_SQ7-=)Ie zORiK^qwdSzb;g$z`1|}z@R#=S$Ho~+|Fs)|(ewf#FZ8tgw>`r<#v>mj`G$82Lk+Ey zTUlKkPtBhm8QQ%q?5zUNA7{RO}1OT-pNRNv)kU zB!Hc>@tNT-3Yg}t{b;oyh`>sEfp*H!?k&w*2M{;hwl8!&(g$5t<~>!|w5A1A(-!dI267PJ}*;?Ek3wFL|V*e$F0E0t`xrY}y^DZ_~ zJDkS92yU4IJijn99c7JtQR{RsC9Z^kfLcGF3&e!cxR)U++<0}#rSaiHOkN-E zFn?+2QVlnHXw157nhU9xwC&0nE6G?%#vXcrYwzO)&itpzhhzkXNn7%=kMNP(kEP0x z4_7ODg^A?Ex~w#st{WXn&nl7)$k(-(8!?G!@Ez}Tct42`gYoTIgcQtqXJ$MQc)#Pp zWVt4uAeQ;*?6G877!vNXK}_VXj$k&dpQ_7@xC>^S#%O_S#wdFM(e}P%`im!<>_Q(N zaz$`8l)bCx+f(|z_8WXeu07OD|EhaVWnMj%tT$g3)3(}0F*>e!e#}qJSE*-Hivy?y z`&iri1l0kE0Q(-s6a>PnNs0dtAm$s2;We$57-9S{y4LGGM)WNEi>9>MUkrVlFhb!$ z_ja-6{_pfH&l=9$gRtN>r_5a>?wr}X#D?roqu%YD*~`VS>v+3oJV_j-#F!GbKS&y- z7d*Y_-8JrOu|qMOhx`xd~vwIw2_BDC?^JA#8}=w z+3$*_KMvr>;B~Gwo+CDNKIl1ghj$mG2s<5IW-#2@S{1*zvlS8<90oeu+4jVL?`$uM zU)R}Q7{9c$wLX4RXFHpu+URWM)lEhT>OUxu{<#zt;o8?bjlUpdq;;fkE$SxwAx>L6 z&n(P~-484KQIovWtHnu0w?A8!mX_E~FQM2w7fL1vD5z(rcP&x09ZTxtcQ5k+49S}y zCl&EqMF2}O=0~g}0+^hnxdoD=Xq{RIvSgjIr0*80RCNA!R>XNCOBd?1kbK!r7Kre} z_cGe`310JkAr)uewdvjT$+d=CB^v@^chw~K@39LKKPe2xzRz4N=0fdFXA=YsInPnK z{YW>*QsY$Bd+bbdK;>c27yp5F-xy-a*JCIwwrK`{+5LK|Vf-+O>$?oH%u;}|lx+1Nwy(Y=Z@NVPGeV~AtWq%jKVoxu}#_5s8)W7`Xe%8LyW!0mW1J`>Kw z=3p!zzi8r7mDW!zrT#pHM@QW8g%KBpR+%EkS0cMyxM3wgO8*~zvJs#ACf(@cY61Hs6r6P@);iPG2Ni) z;Uu2|L`@Dl7zY;A#pp~T=gcu%325Ezp_&wh0;>qqzcIL}QSUM%3Mi(T`Jt#8-#*SQ zBt;p^3JJ3C2)_w_O|k4ga4NTWQ#n4cf!hu*3U2CKl!IIwBF@wn6OLWdHDdDPMjJF; z;Y~19(oXLsemNa1(bSTaasZljdwPIv^}gn3{T;s@?=I{bF^F0?KQ1xxE!kqq(2S7| z^FCzF!w!C?Ys9;ck*flIUKmOv&KQKm?rsKSq1Cq+ zrj~B}hSKFa_G`=v+JIlU@+M>JyyFOaKBw{@V`8*&50j^_aOG>xJlP+Z;4C@(;Be~j zl5qO)5=5V!(1v%y12=LwzLdxobZqFZUyloF8yP|jgl)~w&H^8y^kL%2tkqz;uSv`9 z&Cv3CzB-)Hx_!nl+ZudY5W$5cJaBFO*g?F#)F9%wFF5y~;nde{ZdlyL3mN3R>4a*C zU}MR2qQ9yez7Y6fB=v%SX7Pcr=Xb-t9$T^T+hd=HckmEI=mwd}-2!wxnk+f@AgA#i!g#x# ztcREvo&mXmnlgN{U}OQ|%aX+fXzP&*)1oCh{Y7!{%hpbCr`}q`-RRc(eK2hxe8j=2 zLZ0i&LVTAd|3D@6``GzI9OKWLMUP}vcGkjd8b)IcYSObXhB|UM&6_+QOssbMsBPH@x zXttdCeVlQxQ%5*mhP3f^t{kzu(8#p&wH%4J&CZe=gS$U*mgK{&cGu(EIDP3IMd5V8 z9nMm8Hs9L)R;Y5voSSQ~(!%k&dlPfLn;%KHYRWd&1UGHi5*oN(`M$~nj=OK}`(gKa zKV_>;QIy1^vc0cn#LMvb+oH~oAo(`V&h|9ib5?E;+ zD=`=F?04yl(+F3x%ZL($)1&Ctd*Xs5#qL4AWWBq`Su*Cd-Jc-OmyX)5fUVH(H)|?4 z&Y1`|o{sE(10Q$`4g9Oa!52^f8Q7xa!vz11x$nE{YRXK4XA>C0)bP{T>2Y}X*{ok0 z53N+wJ91w3Q~+SUHZEoReD)v!%|1@37yYR@J+^=BLUg>0e*yH<3e!x%C&?@Oda;t!AqmfOGSUQS-?B`hv&h|LY$jK zqkl+pD%Xzgzr7kV>Amk4?A5VL(hXO$QShpU9^`jBSJublgi&m7e1H*`$I0dTMeOWN z{X!c5n_sfzk!83oSx68am4Ji+C+N4>Y5YFFcDrberd<)HlG^`GG~FOBGkm0AsB2x1 zs%ILpBeC$|g(@9dKne$9^@b3S7M9RSs0 zuAJR@Kvoh{8wciD$ujf-Vzn**VumMhhv8=^wl>w_Hu|_?1~3b>H)oGsrRChS|4Dz- zSHL?cr+_zD3V0Kw@K+U({@r3mbZmcXEFkW|{foUL-PU@d5o(wiWUxvHl}^ly23x|Y ziETsnrF(z1`gbdI6O8{wMHh49p%8n*csOv9w4w(7T-*sDbp z;Jp#<+3lr_dpO;o7j~m56TyniTr@g{TiPjS8_XCn3WOT=C~?+1-CiLu6+-a`MpE2a z;>t6Dl``e1Ss_@Ae;;$q(@Xe1oNI{cOFPvqDB(=F7zvXxB|IWCMEh{P`k&rw? zQxf{g-QdjoBel6aPk$J4*O$GO(k#oJqebqFSO}srIRQ3|B z1m6#B_z+fH>^GrA7u1I&A^|yub*V%fKJGru7wlQJ$9`j={nQ6^3s1Aw!pbXopP~6C(YD zm>#5yTM|yM5R)XmNZU|t!)JjiX2EFuV43Usq|B`){Yl^ycAF+uHqRW?G2F~Qcw_54 z7|?FZq{?+Ocfw<|%!6p=ceBZl`j&q5ug7Z%k*V&;g?3(mbK=_ux@+xYXfULEpW<93CsX~Rn4s1F~s@}UBH79Sd}e5jCs zll*`jK7gvQ%2eny%HCPxck2J=|9iOYqks2)(7bh|q=l-uyEnspNlh)Oa`#!|Kh0aA zmUmXAZYrrJI^^zaLv`g;{DbmaQ;bwrEz#rM7OEgHL4hIyXDU!gAhNs)xV=-a(lvM& z7eenlFjae;#yH8>NN-PE>ti&VWlybqVu-rjIFtz$u6&}%d`P-3T)9H(AWq}Q+H38r z>;Jyj-r-~XK}hPd(6b*}z&ep@;)4ETlI(;+fCk~M^oni3mi;ww<>+yw4(eB!2UuJo zw`UV1ae@3l%)NVjRMpk+Ka*r2V8RKIXuMEHjhZOZ#4A&w=8y@@=mZf^L9wOArqtTj z$_zopT$~BybR5KLt8J~1ed_bps;%u~%T0^9K*B{a0YxHG0dMCxqJWm0Xx{JI=gee6 z?eo09|9*TlbIv~dvi90*uf6u#Yp?a>aam#d%xUcCt?w%UJ&+`6(MPFa6)F8H@RS`t zxA~(9q@p^(Bvp$E!y;7FT7Fy-tdp%o7VaA^AcS-Mx&FlLx9u3upWnPNXW|nJzp1y% zW+Mx!R#xSTL!92e-f}2X$07et9rZxCKyUhnE3&Yq-`HW(HZ&&f35|7<^9+hk^wwZ6 zM|N*`jJDzkF{vt7xRWi&U;PRW&40uaJ=Su*s02$?R`3(7Sbl-=ND!H2l^1}qll31- zMiB;Wc?@K%{#-h4nK}cH-C{=LlxI&dE|5TR5;S_$1yw;?H#u>f#-qKctzn>D=17o< zF6lm19oNh(^T(v1To{*GCkI<}Ix}UEeinPlVr>Oi;5X?8dv`XETB zx@UjW(L3t*wVTA8l`%*JhU(jPBghB1thrt9HR)^k6lZ;9(}H|lKif`@>|ZVRo{Yz2 z_nMZ1$+^|7r^%(GcutAlyn8p5`Q7bY=PcWBc(1Xctf$v>GdXhPK8~lX2OAgHSiNI`(Nssl!~OR0(k-c`tQ$ZobStZYlFyJR%#3;gbnn`M{SSpR*4pt=X>?Kty8 z4s>u|NzOYQScT*wm!ap0RHTu^g$QBZ$6S>xJDBc-lzY>0=KU}P$)BDN(ZT+YIBoE3 zJEBmLsvi74N=pjTBzJTbs?^(nfmWJd8$GSpX1ANgtsKj?V;85ZUkszOAZLGuy*o_Z zt4{mv;LK;yW4TA1_z|8>4w!!fE8-{BGM^Fr5TDV$XwGCj4f`x+qM<^#nQxUcHI*%_ zI=$&LlO)*DmnTytlxy2^r}``Kx!IJrx@~ym{DQj(&A(wvr`mAhMTj2=T)O1<+|&4T-f;7-c8O*r6=u~BZ&vZu*bE6M<;ch@ zvXlhdzPng&-&26#DzDgn%*f(dVomqRkx{PEVf8Zd|8gHa^SnZ|rD%V{9yoPGGD3H=rKHt?6VQ)@YfUh zDV*U6g_F%<*MY0+Ezy30!&NJ^c@6?E)1lV;Ns7l|3qO|)ni$+j+#Z)y6s+Z$S+mul;& zc;weqx9(HBx-+;cYuC}9t|QC(fL`16ll4@mn&t+1an2p$_zxt3h5v)ALI9H;)??@-fPnb^^z=s?EF)Jqh7evm1*kfwR==2>v? zJznihm&@c$6iuTy=C$e6OYNe$l6r+eJ%A5~pG}A>Ge((#25RJP6h8i8ZQ)^T$7T2y zmNu;w`pl;8O$t*4xc?0ZGRFa=!)K62vHw@z%Cf@sb$-MQicG~N`tHLFq%v#td|OO6}OYi^ak%D;i}&)m-Ja`W!nzd$NKOF@pAmeE8&^wEfilD zit8tbIg@!JxIX<8>@*~QkexN}JNMht+EDt6-boe0zZN?M5vaKQ$6q^!X(;jhB3=S^ z^wXCZa5*3LeTnS~7Buoln?ekGVxJ}a4lD9j1eDxHA!NQ;qNd_%Te4V-+6TqYq-qm+^Iojk{t|H2ENmu3d{gQ%amk#D3rP(cSmNOh&=!yK{O zy^x#RrS+$TkncH{e2ZwcDka5Vj05S;xze4>%LpQysSLP-_T^uSq|)3f{-9t}iKuHh zJ7;uz-`%~xc4WYV9q|KJn@E!`Ubv}%~`W^+EuP#ft5 zYHiK*U*xR+?6ACQa`u^GpJm5SCQ$hry+;3@%!d-{_^S2ZE*~ZCC6xwsUU49oak&fZfxYpZZXI%@@bGke~kf&J{; ziUV)qlN5Z}(-E&go7@HTlsRm@8vvO-cAmv&_v*0DqziO9-_c zI8K)XiR*JyRxg(Mp`_GKK{NZUf$9sK za&Mf-;Z9NKf-9ODa&se(Xe+a+P_h1%RauJludK=u){n=6A^e_A`?=Hii(0KZ}TGC`SRn~!;3x$Yy= z&AVn+aPk6kArL43BI~_K$L{LbR*qaJ^xpX(uQz5@$99I7R!``=^FFEDkLvAAU1?_h zOwY6McAl}G+46j)s9<0a+v78!Ar{C!^V1S^E7#-c=jt5u19?7~$6WI*m7K$Kp4p?G z8Lg`e%ysG+_HcEfxk^1l99I{c&#LD_p3g9!;Mor8E1aihMxa&*<7vi2FjFa;Dcjyc zcGXQnO++olozzVnik+v-EQHrHD39y|qi4Z^q+CFDDCzZ?fe?9EuHoeV*}ZMIuVZnD z67S)~Tza(+`}tHMHJ{|}PM+hlPxrMqTqE<<$=o(5bBwm7b>*4ofO$41l=fX1xXGHC z(`JOF{#~$;LG`27s;S+mzME})w60>g6X>#3O=>X`{`(qiOszYC#58q@D93EiNXn5S zL(D&sWXs99;dAUT^_i`ITNG^claZ$dnj?b#st#-@jI zA#Sh_MTCC{S)vqwp3XbS)mF~PT_r1>p!ePj)pk<)PyloTDDh9d`W8XSCJ-ekN&El) zz5_r7R;TF?srl#(1wKl&*h8wxQCMNr`8H@v61*DhP}1{djnjlsxmlapOa?uyoB^gq zP=wTe3?sy&5!8E4mU)Z)GK7~L^EzHqh$X13@JYC5ssVFIX65#c9e3n%ka;Oy?xmC8 zWd~uMA|e?0J_}rX`M)ImH?n-g$ue28d?sT0iY)6g$(pI3ar&($9|Clj-`BRd7TMRe zX4cH$eDhL-E+R)=#yJqO?*c_UUYY-jyUP95Eb~F~=&K-pAYu=H)U2daBJgsB6aLGK zVB1#Dz?@R_Ty!b`nonZyknuS^pVIbYcc?{|wHvaKb+-yLK29;Zi6$*Aa{lCL`lc%~ zLkuSO$&EEu&H~+iWKDQ>wVE1tB5`p86VKg(uqQ=|WCa=#l(P}QCBCyH@f&m?O_?SN zY5kG=6Q~(Qao$*Vgo~v09v0%{BjERO%x$FDf6i7b>Rrz3L%c4pOX=62VnK$f?B@sg z>4l2a{VI@)rj%utiG91MHcj(3tiFZ%Hj{`zLC+G4vXuD1B>~9@IA2rX3>Gs`Sku>8 zcLR&~>5|2SxtS?nRLYf8l$@X@C1Rvdq>7o>USw~cHAAtga2{ZMVO|E&ZMiu0%L!dKga7% zo{Im$=yB|EuD8FU<*+}w5>r4laz_K0&hfH$e@%gY)cmU<;@*5z;xCpIc)+O^6aP69 zwMAadht+pNDDu77{yxX~F0W>o?`sgR8_N!cd>?A}!Fya)iA%n|nhDrgcEIm`Kj?c| zYLnculWI&2UdG62QxB@U4)>Qd2?Q-0`CE1nn+@&08X9v{@SH3_5V$Rz(yBtO4pP)Q~cq&FGP z{(s*GcK!!tN>^-LE1gntaP037mo!PmRCEUwCjS^p#8e6=muawnVUKQ0136QqYK^5L z^cDFFsUKZ8x6%bN3nxh#`VrLG*YjO}5xmd{@t`FS!c$7WqE6ZaiAm+;Qhov;%yS%w z-=3xDG~m4U$m;+VxAQs>pN1vsC_*Zs9bUu089klan_Nm!bH{Y427$)eQHhye5q`m4Hs1>>ac5r%-)l5ki_BaHyiAFe8;5{ zch6Nu&gVhl$?mQi-zSl`gz*-jPhJz!tL_l#c01!O(g!!V?MSDxrdOK%utEq>dL~?N z_i2cM58E9~Ov^EQc$d((f(`qKSaEVo)O|q~<$$@C3T&x{a?(p_><=UYd&7ld)lhMW zeaSy_L8~J##|tkH#d9tuqw<)rSZeUSANfFCg0al|>9|x zka8N*1n4wTWW6hD)dS|4(*W^=T>l%rzfM`xtQk!2rd(#W>3tWE8T39Uz;HYCevt!| z$Ylfc?#O>^Lg=_C^Em7z#?*Y-waDYw>Thnkn+Q`kG~G>PscW^B#F22MtC8=EY*Uq` zuO3RrM0~2Q39|GbfE3Q+gJ|W>=2y04CH#8$J%?Y}nw@L@4iZd`6n$tJeG+mTNw-oH z5_Ex9{@MC|4v<7Qt*v-ac3rGWC`jeL^s;8M#0}AR2Wor7z8TeNZy<3eN`;5S^rtoY zxGK=s`p|!k`Gk2WPp^&T_(K zLM)JEfF|>p#hH6ne_4;%9UtVB-DpF{iMBQ{{48WgUiH2&XTG z0zDjKo7&`WRq$XlDPtuzlQ$10R+~~Ae&7(vqXDrrBN0WVyJ9QBN3CBrW%S3X&sNx} z%ShH;u)cJExfEvm0SAQ>hqNk};Pt%&%}1J(Z-r{x>>gtl#y^+s8;QSZ{sx;pqOH2$u5lj_ z^XE6U6*Z&%@$b4OC;Vq)aP2QM4}aQplpDfroaSpwUI(ByE8A$(R%`@&sBWuM2eR-o zSqhx>oA!s;P{w@%p#b#p+W_SIWZ@4LJVZmlK1(dm)wVBLq`P-iw~h{C6(i=?zHa?5 zLl$0)9URByTtYs)6%V9C@NJyP8@25S=5XBKv~9Z?>vfdHGe{Pt>R&-X8DbmKs#`p? zp66N(N~BMk-6w8W+dWE;r`X#`e;6g94C`#B3LsAgWH3F@hx6?|XiF|)7M$1*;lFZa zzz^a6OJ{~IELWXrr~1Rasxy0rIz2&QBF522euqS=K7jZ0rjl>e`k43hG=cs^oyaV352Q{b)9`ORT#@ z&4wBig@}E;8;akJOU*yX95=dIzs8YIRBSreYV`JF+32csNuJ7CLnZF}t1$H}7fdztY7{{E|@o*KOpg*t%SAnmF1OIUT1B;%9)2 zdDm8pOL*sVxKGKop?3J7m;#*qI^L$vaV~-ZQ>SP^HHg@{%aKIY2P!P71f`( zWMpzgYCX2IckT?i zk&|oOZ`JtTUU-!_kK!6$pT1hjt%v(?0hAkbzZ`JCnjB7iwNAHWI~&r-8(VdLDBIn1 zw6Ur+?+iG}!l9hqmAztE?oGb!3tmg1I<^^oknY>AdbLnj4(8dzMelT-`&K( zx6V3=>9BR-5aV#!8yI1_d#Ziy3t&I0cDw3*R9)@s(w61`qCirqwM?XuK>Qh5qd{~v zv40Y?@l|v$nxhCv{_o*J7^(4tS^JAduynO%`}$EzOD6p^~4O!H8B6h zl*>(2fH!J)xP)*U@_K5veNgWcZ_$5BgrMe;w&WU{Y92 zPIcr3g_o#}mk~B(3YPN$LvIBtDIW42i#7 zL`A6d=;7(?l`1g+)0T~bq;A2m+CO?U1K zx;F;hn?d=)GA`i;4!_9+C}8-4?q2jS2tC6lpFhh@p+atkDawmj4oxe97AmgPVqXkQ z-fH7hJV8QXWOK+Wl$ZxJTLX!DHsRrt2|;K}9s*kI41rA!DAhEk!EnA@APD8UD|al_@Wg(v-Cgb8AV!v(18&)d@+S~aHkrp9FX)e!Z3wjx5>>G9W zhHB1_UP@2&@g8S7iLruArzSgoIqXxUXf+D+@E;d(*VJ|d6L&EZS1|*b5UKg3=7a7~ z??{JwJMJ_?ZURTItC0EjP=*NCgA1`5iz{Jefapi=-oS8C&D1Ue;G_ z?5M_MwG4MK$Ht0!*ywHla;(2%BOdB?<6w0~2dLA_4)Td~y<)#!w%_k-Z}j+my$!>v z(NtaYxo&)}P~tD^W0K2Zw3=94xPGkU2{nb3KPEN7tS7OP6n&8(!KE2L=QYjA!z_2P zvq4oL{=9=0;p+I#vq|Ddpk)@+BI4>sJNQK!KPh(|K@L&LtFJ9`7}*Wo%syuLTICGP_z2P$Gy9}xF%6M~0#q|kRw0)IGHCoahb z(;+vfowwue#`rR59Ii25OJc5T?;q`10(EIi(BaAv^te;_6E1W+*!~bK>IMkkCZvk< z9b(0T{r3K`)fGKlI0TE;6`QNwy?PnfC|)I9uV93ZR{J(IdgOjzZnbZ-k<_mF2jrb| zvJ6?%k;dv)eDaadw(un7&&XfajiMK0U>|``wWt_Vi(ke-YAn(eITevb_ifRZjK+S% z65F5D928AF%a0{amNWU`3&JIpvG7C&L>94H1g_;Gft~;k0_eqQ0Td8Uls|BurwQHG@=f`dg{3>`m_!WS@5h0*0FPZOMFf zJ^=HTb8w*@0)y@k+0m}pI22B%TH?g8E%;FO4M_q=smMai^~zjhgQ93Y6Miatl8~jg zv`TD4W#h10HV%or0;_@)6x^IzoeOgCGr;})DHt<|XP>h$1duOp@`aecS3qBKJYH@U zACeDStws!P@FlR(`UEB>Igg0p#^8Vb=S=>I+qHao|2cO%zvnx@Gfw!u#d*KV`91C5 z{2s%oYkAs#9>U!qduVyjgdk;a<;RIDz@uRfiDz3jj@5fBYsk1Io?nB@DrI@NUYyalL3)G>nn)sk zh>2$!$PM|n+=(lb=>_o_Y=nAw)$V%@0%a?No}t*cIl>|10ke4oB^~D-k4r7JJ4Ml5 z9!gwtQ?UJgjB7p(WRH30d}*z!pc{^Y?s=}p`h@JAXS-$Luz_&$eCIBSXO(1)j|u+B z?Yb%+D$niTM)lm*rEcWsS%eT{>c8`f zQ9bTZaw_?MJw%GgxO>0(G;Rk1@k^sn5GcG~e#+K$dpap5|KzaC8!$XC@GefI%kWfx zWN5?B_nTu*jYdHr2N3sQcpK8&|1lRF%N`NDj_+d|QtpFi-rC@wC#|yb3_ui0u5B~f@ zaW>;qsYqKQy5r~(FR@G21H0z$^AIfSK_37GhKx@_Ms<&ULB(uE_;uR5^AB;)F5DXd z-7>MAvBN%GTK5Ay)g*rSGJwqFF?mK>-c{FzJBzQl^!Jp~60I_!3L;_mFKBlO685e7_|J9kQgD0F=m<7%67*Ha zHU_moM*xg~4tHD1{*Nl|q6+IHnuPJ&1y`mDQj!R#CzfQm=o%%jl#>4~C`jc0V6%{W zpu4(92FzTi7AUC>CzOCuGmInm6Dtz+ovP>%x$S$E*<)tFB&aXCiEr^L2DvJi%UI?D zvXJ~T$>#TXc9=9%pp<#_&xqt!YJoBRJtVv<338VWubf%WR}s%(II`0PTcN_ z983;cPvV}R!XME)3=wy4m9B2jLf)ZGS28ADNZaF7GWnhpC|6zdpKo9I%L{lyDDaYz z@SdIFQ-~QHFvk2wa@e+Y>Wq)`wNQz-zv!I#;%@v_c|7<%0)nk~e!KgNM)65-Y+5$}UZz)}8oew0gW1H94U-XhB%L>)5 z#eOFpO;qoeUQdu-bD+;O*&!+*Imk{_n`*g5SskEGd8V^1s$$Q0Dwd3w{*h1Jo@_Yc zupC!gx95ve8`<ag^v8o}N(-F`gMUo=IkN#wu10ajBqhnN1M-_^NYYoro9 znt?ac%vE(1jaL^_+1~|(1ZNb6X9kbfBJijvQr(A(yCu#&iv)CY68mmg<6a&swys8#=rY@+9nnU`E}?{CAO9p>eeCZ6e`0*+oQF($ zSXI5A@AWe${Y9y< zOUe5zmDgsLx34Cu4lDYyd-3>p=@Iv#wb*{R52P^8{2kqsWnIMyQ#X%oWG+xytqtU} zQ&k6Uwo`?7iMiy!dY_(;Uh~=^)L2w|o)FvmmaRrltQI{QB~)A;bJe zo%o7#6BS2RDWmGM?8&)C)e%{Jqg}ayGSjF!jtPS|e7P6`p5{@FGoXTW?~2Z~7Mac|TE8e&(+{ahiwSi*w61Ei%1IcY zANDFPlkcaD&@Mxs3aAi8P*j)>~9!0(n zBrZKDKfX`H3`n-%FpG5+;e({ezRWV_M&?O!b$UJz+CHgx%;mCQisv_1z(eoHq#43c zIxKH^p*@}7_zu((&z~n5ejpj*`Ez+zJl?!f5)!k-K!=MxLJ?}$^^7XR;upZUXNoE$ zo-Pf~X;O>$w^VhLFj5j?lARSraT3t+E;fI%1{K&TY5WO(&8du_4EDnuN4KGp6q!MB zcko}UPYk#@A87VXuZC-8ecD;kR@Z!2@kv=^?_6Hj?5nvkJWRrXD|$_C8O&dt@`U`r zhTiWkMz1!6ZF{Ns^iAX$c=Fm%8V}?VBN}~aeQtIDgm1bN#eQ392>q;J!fZO#1ew zgy_QDE(_Qu4dn;q#OK2SVYA;+Zqk+0K{f(Ik zKtO3j1bzgmP#j}mJ_TvhPBKu&)o8JgwZB&EG!7a=d*kH#%=IsIpB;(#w=8lM`%?HiIlxMykS_N+)Ar)Tt=Iy4Vv%*(JKP+!LHf-T! zqc1VXZ5G;7JbVqub}D~OkY~eXuJy(UFF#3`p9f|OFbJZFJ zf3b*hXS*bn`IN}t$di}_=deU#z9ioNvS!*=&mUSkxJ!hes?Y;DXx4w!;=iSD?UXM`2hv! zoi_=fp3|j?ME)i6V~ojHKUD?&MbGm&qt3P9yFd9Wd;H>_eTW6dX4=&Ts9%jARat!N zFB+|?FM5#|aRP8gJj=HulAoOB$ES&JNBBJCoj`mt9d0AQS0ewfs?awnl&UZ_|JvCC z7U2K4z-+sb&Lr}Ubp6R~stTi*ftpEb@-4N#%CZ=|^Hi4D$ndylG9PH9F1_Y;#y#Wh zv|Hky5}uHAB73N~oab)O2>!~y{-VH*RJkGUajD#4J8(g_XCG=1$s)6f>xB77dG9Y; zAenb9HDVYt)WByv}3R7HF}!&x?KAkap|YIhHWs~hxLYY zajQa7c=SPSu4+X2>WL|=foY2=N3zgGH{;B*b!9?oysT1O$j*77#PQWp~N`O{99CSCdh zsQ!v>bPszY{DYRQt6hMowbWBiat|dp0ZI;Q@n;e5a4bxEr9{raai5f>00Ry;N{Y1(eKD?&%sk6TN1mqQb9mz3IU}l1eB%_P--K9 z`y_2tDXTs90rrJ`Ew+&PCokZJ7XSl1kwIgp@hl(YrDYc{3f>f)$APo1TDxH*5<$s) z0kCb2Ol9+T$eHN1&CSp!$>ZAqpWKqjuC< zEqy}1mtmB4)L2Tz!%`LBjbG+xPweI0&NkS*Ok7 z^!fnHyW$`K+&8;)5UrPOjsn@5`UfV^g)%a{*7AhMQu z{91iNBpF{@Z?eC}X3AHCKk`)#H3Mv%E7=8!))PE^1y28lhB6HsE&v7>m%{)-Vn24c zFguvTx4yIkVPt|}0kO;iHE@4p(u7Hu{c11LagA<`7vF=h3t6 zZ#J&fO#3Of&IsWAK3KLENxf-#RGMxjtF?)5I7pU3(u`x$)KB$RH5 zskKa#x_-`|^ir!HM4wlnh#LD)R=AL{3Bw(GNzjdL?MDjF>4y{g6HRWa$D;A#hBJg` zz)Ub^gW?vY>8QXAqBBK%WN;vx(@`tAS`=Z z(%-UKi~YbJp!|-%Dukxn(4wMv6OP>qV28H_+u!l(XTDi8Y+HzHOM_|$tTwwHnO{YV z?3y-`43UlR)s_rZH7yzirL|k4??}rt&DikuH~NQd!bdyl0oaKA+y7EV7nHKj;h*5E zFnsFji-kEWH3?>;+xAwwH)&DPWcd>}x~=Ivq(<%kKk|zWksP1pBIS9qXCUQyMZP4u zQm>pPGisaAhOc(bLlp3zu1IA~tl+AS~Y1*Pa~lywhLY*@SP+DD|aZ^4nUe;dE)p4x-j`ENq|C|Q`6 zUY_Qbl=4*Cx3TYwU42YauUJ0P54Ca|z4qX;`bw1@k&7XYTajwC@q6#i3SX$`(+k~9 z$k;y$g+v}nS}FY%>m!9D>&+irqb4fVce~DlLR7isvbW^l{wp8o_-ED|Isd38eHWcMEMrZ zq5Y2sf3T@V>G$S~q+6+#5n9$Bxu89AFiy)W11A_#@-!})uvH~6KqLTi^Nat&5ghTS z+%O55+v70{|8<+L`8UKkas4wbi}#|Z?BCY=;6og z?4jLiqGr_DCTr(hyRO(Qe#z}wOKzlTqyeqdviIa_5>~&e@ z0px1(F@xKc!nh7EGo^bDGl{>oo2PZk3_(EHg(Ph?0lRpa94pInlJase{|>*h0kdNA zuw2%IJ@%)V2uT$7v`JyyhKc+j-?!S|TQ>1)30DVYFFO1?)oD+ZLUyO`dcrCtlRf?n zr-}uVIUa^wLAF{|9@dY~5e`z*L-^-xoas8#a@USS>)hef53S?o$bAe88p~YH5BILmZ#VGHjNQ}P-{9GWr=Y#XFWe~Av#Fgp-kPY~%h)M>=GnEds1AiC;w*4o5sP_Ug|c54gnxB9VyPZKCkh8 zdR}QCtEuZ?-Ba=?-f!K*9~uHQRbCaA%75pS4@miGd6DmPL zMIN!JHse)!(qB%wT&lZOc@1TUs)pr6&XyLcXu;*w|E5_b^;hL3RQ*>|f19s#`s_`qOF}qf8R7^yNQ3dNK(qFe$C8lIE^oMj}JiS8DCV7mFBLqyGr#n`55~* z)^ptFc2^ci@54|kG+P~?El#_=7lsno;*$OyFVZ6SVRD8Oimr-Vw0(L>O8JUosuEC`=l7rn>p65EC&p|ah9Un0YQ6Z1B%`(YHrkrZw#Imvf%q#EMR z9(MtPhxd>N_K@>4B5elCxDwJ5~|io5Ba$bVt)R6vg!E(#gD17$~aHy7=;ir0(} z3AfY3;lWUDP;l1L=I*NOFAoqf;nSMhtyd)$pMstK2U_eqc9)qc*NaI;*)ewqs$345 zp^B-0Xp_+xLS4Mlknq{v(53LR^W!t~5?3Lr8&~Hwj7ihaUl8;M(GRsf)g%$(>fK#K zFAVxVTkv%T{A1{Ggpgx1`Qv)i~J z`75k_)?9zxb=MvKkf-(|W6QYX*K3_cKAS$Cstg!kYOxccq0G@A>&7NOPSLcVa~)NJIAImV{mP9>J?@YHD0d2GbnN|H zXuK+RM%%G*!?$~Ir@K=>yj}=gh`T|ETa+sBGMuW_bY_rtIif41&7r-bY%Qj41{v(P z-jPWxm-1Y}Z59!amq z(=hi$goNGOECL81?qI)VFFX2L-uv~x^QYeul1!~{(mSoCjjz%@ZdwcBWkYzKZtH2D z<5P0a5&E8FllLbi`8g(W215AzprJTqH^G2hjPD&XJ1)M`>%Tufje&;3@kW(y=qjld z0u?IIo8RkKme=nvT)E0~EyM8zBV#p_O@>BU-Z}Wmf_zj1Vw;{CS+^KN#vK9vBBT2QirFDv)$6ajP)P5 z)cPNyHph4s=E87~rxJ4yX5yUh+D5IMIjZ@b{@TgcWY==1Me}8yX5*}0HOE4Un&bK^ z=AX-4Mn$w=fN*lG&bYqVm{Mp>kkMLseR1-jjOT#84_B@1!!QCOZmy2&kha8V_H!FE zagxw-+5T!n&r@{#IhA9Zh*K{u@d?j*SsUqo5fPSs#JkYHsJTT1YB{9RA9#y&{Hp@a znfOhOb*X7%a(7mh3+KVD53NI!iK&iD9IJ}$mrBD_5kjc7yQ#7EJGDC5Y_78}VU&hOMz zVl6m2_V9;go7fR*%MJ_S36A6x7PeN_1J&F26(l((OiNIw``RKO3-+w_lyJu1k(N3? zJ7KjGq`pixSr0D+T=Tc&u(miU<&yG%DuamIFkh&%0D-IJ5aSp=FZmsZ{{IcWuCq%z zQd>czeK2o3T45yAYOTd4(wK#h_zZm{Sjmn2jC0y`?)^qp0rdQ)8V@s@8d(4reVqKg zLdBB+BYhScv!383MelE}W)iu~ZQQ1?T-0rg1Sx)#uJ3uiXRe3uTl=U)wda-c4@vnp zk^~}RaZ!`dzcq&>#*-{At3{d}Y_H3gjZvC*O@^p|V@EHO39*U>oBp{tNw zmmpM#5S@7wYSsAFx$&xTbQJ;yiN=QL9&f$~NYRbeTum@nV(sI;hehg5F*vvj8imi; z_AdDKn3>1LffT-!{lt7fC&xRvO}h=$FS;GM4g(h~VrB0aQZ5~Kin;;a)^yqZmCMs? zwGUK#MS1d?cj7}(E)s+|ju(wDyXkNRD&hdJqY*PZz_5Vx({Wt*0G#>CzN&k20o}ie|too8A8hcsuascp|*D(mZVgvUw2Q zcLo79oIQBH%~aj3$`b+rYkp+UMy!1fm`_8VU(rA5rFA{?JEMnJLW5GIKC{SRdQ;=G zD06(Y)(MQX78}K1={1|!P|4iXD9w|xnI|JsDNoF6HuEw{YP`JW%QzpDUe6sEB`r3T zs!%L{q1}HkP{IIUG>s88F7coQc_6sEBBM0? z9eScO(3AYN-V*-sg93N5D@E^VdQ;;eR~+aHHQUSJSk)D=w1)nE%LpeQQ_G9C>{Le1 z-6O15<7r?&s}ICmov&t4UmLVnu9T#8=eVltCK1^n=0ydft>i+laTIlB6E7{I%2T;^ z?QrsWv{*j*>Y6{`-dk)m-(>{L>zY65zmgqK^w1fS5pB zN-*|^Z;u`w7R0|{1I`|}mC}BBbgy?9Sd7luG(nJ)>9UvbvL{F%JIOCci%hQU9NKdMLx)#VeJ7C2lPW7Of>Cr5qbq>j`Yb|rgrc(X9(J>KZX+2(jjsKT79;ao7374|AJ7RGEZ zdL!)bDdh($4&TRe!)ttfxpgfqiN37Li?i4|rr-GRr~%Q#GB2Vm@}uu#Ehg$&XCoUu zI$n#-;XQhET)2aV%%?wsjCZ8zMe>XIBK;LK40LwcXyHy*7hqTI*Is%RyXr)t8&P^1 z7t(vqQOgU)1Z{piN)3^1t*mK>Ka|yuWz6Ws4MF&9d!gJmFBB=};T z%O6|b807D#`J+`d9g06&;-!mXohhz(@#!d3U1Pjz4!IO&?rMHgCCE7(ir>p=Uz`v$ zQM6(wUPJHa0WkU<2cpj7!=%!xTt1i>x4lKyQHsJYGCszS{HrrwEO~-olAe@z{^43u z4p?z&{}eyw>43m=4Hsx@3s%WI#7+_8?1lN}PtN6KxBKu8F7#69S-#1_hU4BROPbWn zr2l+GU=<044?nV3L7tSwY6Fh*OUR{ALtbBi5@*CGS|tN(LZkI z@|NnjxOKIG=1$pE{6Z`)$&(|4I9NxwUP|dfMyqGDX7r!zQ~n5QzDXcoXngF#EWr<2|wo22S*%q zn>Z&IgU1fX*XmhlQ>-zJ2wDLOM+%*8`E1a&SOX$gFn%4*9dFL1%<4td5;S(nP2M}q z&xG3EhQetvhvGp3l4-F&)35>|b_Ruc$_fwXFRDWE0Th2&^+3Qf3atO6FzZXGWFp1Q z7cT-tWjLv|TnkWZsEOelvz3E2Z4Ox`-X0kTLbD`jg1$yXJ3Bpj zvQ6KllYbyR*2co7wM1wf*BI6qe(ARm829`HGJuJ0@IIB}jGz`14wWoUMm zvVKoDV{E6bw;^b|0Y=toc;bAChm!(GKy(0VQT*zEY3#DEZ0tNFbn8x;v&;XN^5=bJ z`OA@%t&3E784bFq#o7T)28cMs(4ZcVsDTTrJ6d8l7yFeYtHE8b#s0xd^k~Em6fZY{ z?+_o@p9qh76W){|?+hZvj47fm`4dRu${~0xr?A>03&L>|c8B?MbRyPrYWiRLw}LwU zbub>0!4SrZJaE4n%qGEms;jx_uKtpzU~RS2)$3S^X*`V!==gOl_6~Uj$U9^n-i(t_ z>j*3~wLV7e`g80-mBF|EAc#$Umz0T@X|XUQH}PUE_9nlX^k>~e?tkf|#Hki5c12{n zh!L?@5!qN7x4UV50KZ>Zbkn~U{fsT1CHGCgvOwRz78orBMo=JQ%ycHT8ZUeubt4fccp9pK}om|XY35C9{n;0c_y|Ij781ziNmy| zYk8FKEeqwly03)4EZdQs9v_OR+4^G$K9SRu@asLgF;tDmsX_>;@t{^1;`!uK6IJmH z>#!P7p%J@!d2$Fx86wH3Zc};Wd*s&CH=s~0tQ=H6;!k~NjaApaU*5NYi2?R&FaF zanQi+V_bBYxu=On&<~dhHRNk6XO;Y@4!46(PzI(fl7hn3Mbs^;j#}k}8m*h?byGvu zC0Y#IA=j$Q$T?{0x&Ea@p>UjmRjIYW%0tKP%m9kJWbH1H=Jd7n*Jb@3jq#ywTup9AFUWm6gg?iZ9;m4GWVr`Y_udOA! zoj0Gn61c&69WAxh4xl9ffS+5bjY<7&1D!UU?iTHX=aXXG)AH_J4 zOL8s9MrMj%#4!kL!&JW`C+KT4t~$Qp<4_sqi^sCW-C^z4V8Z|4as2qF={*o-ON`M> zj;xl%kIB^&*NZ*J2V|}`>I?Pu_dUAycmE^B(fwofGGdb*HA_o{zM*9i7^`W!WxK3U z@u`Jyw3eqylw70mI1zxIiYOj{T(}iWZ}Vp_BdgM0bc` zenlmkszgSy+a-!PbA2(|wKeERz9Ms9LRy5kr7}M%nG-gD2_zm?-2h@g#O*atDgo_S z4|UXGhSe_0Ag@?|VgxGIZW_S{{N?@lSimMNVDw_FgMr;1FJ@W6VK`knIyMABd+|+& z;S5D9+SxX8?ZLAcAeya9!BY$GbMj-n^Xs`?{mxGPwl`pWdcMkWoBf4r3FEK{z2OkH zSo_6bMO&IrUySx@V=Js^w&1XRPobMZ-s=qx+ZyFw!O1m7Z~euAT5<>CMRTy{5U5H4 z>2~!uXA_mJ*Oq)+ma5wsA*qOZTz=yqkJII`tV0yf;%Ke4Rb*f4l5_aEJi9|EdeF&{ zwOq0~4)s~^K8DFSZys$~Qr@0b?&WhT+EQ-!vE0FbzqagWNXSlF4mHh^j^G$Evxb%! zd8FlRVioY6Mi(<3S~l`fsx7GT zo669*t@%Tjt1?>#G%&0O2uo##mO4$9O6iJ?I2@W)ow&9i69bVzdWXv_EBYb4g!b|y z)GB?R2lce6aUTTSWbIpdTWyCpumz4KAUe)u%3HIb)eioD1z<7nhSomlDcKH+Ecgr1sanO;zR#uh)ekPpfQ8r%NcT|kfn&{ zOQzGL!%PtE7j0HPYn13~otb6*mi3i)fBZ2;%IawTznI9tDWp9D@{QY6erAV5(L(M* z>5jT%fM)8k#`+&=Mo7dNey(Xj1am!COBqZ=wWZ$yZ46M6u2OCgUcgY_2=K!4_Q>f} z>l*q4YP|Xt{*prNfoFIXPiUp$l|Swo3TvVRR8rWZJ+Mhv*OGZY_a~$G@gU-%(Tz4-!8hikl#OVP2*NredGI)=Sg2-jZP52wUcw zQ%DdgdZb9@zAv zz?JSCctcZts}$v&(vB74))SR(r(DA*dqy@4_xa&M_Xo%+Or@L|IbB(BDz@W>kMjQn z^Bb%-is=N5Zn8~4S^71iXPhR_zWv%YU1j9t{|Qe0WnEGkxvuATmZ+mkX@OB`m>>ba z?R9FASp|`Y73Ds>xEP>7Y-VD)UW;h*5+b8 z`q^0j1-F(=p!Vr{^rIX-`tDf2d#~SkQgI8vv76>b$vkx-Cku2o8zKJ$cL(2a&@AJ; zS7xz5N3*j(e;rtrFcA1BZ9PEHT zDl{Ka0(wJ4YV!)USqU{;{R36XibPQt4q}rYr56P({h=$vxM2ie!@(foG3gO3}Y^H z)Vxm(cDKyac|qg2nyN>cxO7Oky7Wnb7%-ky>Qd2>=8|fy<4byfO6(Q06pm@^ILYRO zkyC}kO7TN3cO;Mg_+={I39FO6Vyn)G_)q$);+m0>8F^9j^GOaRJ^~6^2mGx+k}X6j z8a=hZ$J+S7ph7!qSngcrSQ?gh-v^M9N}^+0>{0oa%{MF%;Jiy^k+Y5pivA}6@Ll2yzsTvp) zQzw%I%b8$wTJOP|)Oe*i1H0NUSuxBX00h7QhYI|anrYgyReTlK=h9<*%QB^~GVyia zJJRU5fcZ;D@TWZ2nGmJIq)!K54$~0cV>L<*a;(khmO%0##Tp^oIx&^lDVrh!>D+_8 zo3(|P6op&AmaS2$++z3wbsG;+E(6tyqRi(gD{gLQQL_wY%W(z-fpf92hQ*B|()00w z3s?o6*)fQiWcrHVs`BKSw)_pOsUb3_Q+;Z1XaU>{ZXpEo`g|H@ScD>c&njwIyuM-| zt@?#QJ_~11@g-m9L60`#40u^9$kA3@uk<#7WN~VL6d)3zavH}afAGkug75W;ci>BnU&o66Uru zDZ8}zDnMZaB#7{_DB6DYscg)DH1mN4k$T=w7TWq%Ctt4?dx8AY0ze58P$5VSRK1y0 z+WHoPnh1C2w@I7V!v*Gu=*DJY{1(Y^_wzix9Qk94%Sn6!>n#Rb>6BW=Ljxia=P3CN zL%%U3L}k_D&ji^L%o9?#hLEfjXAY-RiPs93SzJ;&A_E(0VNp`J6+t^Dl%Cm^(%E7lKW{Z&T!Dsl-nuAZ;5WId@jZ zchuiXeh`glwB$X&2IMg78w45%j9t6Ig|xo;?^8@=Ioop2ShZr7NPFe{|>uV zF5MiV#yTIAJ>?euP8r0P>!?N8MIc!a!WupHJvv2{CWvzTL}-%Q%n%(H1HslTsn@1V z>ojU-wu(6?vZQci*&W_)<8)5tsJBWY|w+xZd<0#&DPM>~t+l z=C@iflf#_-J5#s;YipUqpQb6@>J=ox6CLuTE&N1WfPi4#sM;62;uxF5@KqIjvwj7? zjuW)_<~#sO1Pb5`f!e8fgt?(0l*nme@p74~;qMA;G0X4+x$y8UYWbbrCN!fhb<-=J zdSoFM>wg((8F3qC%XS0yMQYqYi6v?-HCS3~m?+vnWa=~L)LLu@EeqZpEXts%UJ5$Z zd{Ic<%X||?A}g&Jj>(pEu`E){%J>3(doH;b$xkF0A@;BH!bDle{~I9q{PTF1{lq5u zgFXW{4ukig)-r5G7=vP{|F?)KjQO{i0nVtrBQUB_v4&=JS`oKZPIgp7#V~@F+hHZb zgp@uVE7&w;bh&(MeAFUhTfh<*$Y~PUsSPHPorp_9BFp}wF!O~E$3)=AnH;y#LkE=a zE3z4c&hSrV)mrw5lr)^Z1%)g8t)*W@s`rCQtz|OMSgZJ>`mgLv{aW>Y>kK-krimkr z{EWS=S_^GCe{tjR)NfKgtK9~nBmo-k(eJDUDtf9-&H@O zb>u3UaoDBJ#+)C`v|n~&0seU5^dUYCFe^KnwPU`SE#SPpqVGbj@`nc!X1{q0L9P>KQcX{r|O!o~P zdqHs|&}UATIv%AK6=*ocuLj*`l9CrtGAN;2hyuI5zd$$Ek$4CK4#qE29zhTJ<1Dd# zfQ12o2)=A{*)Z;loRO@?o}_j|z)gILSDWtXcZIKoGi9-dTzG-D^5klQ)L=OeC^96F z__jbd76__mPLMry6NyV6LE|z9&{VXl6ubfSv%zk}B8BVBVh+EOJ40AYN6t)MrR;rb zd(`HMC<#rAbGWZE@vA{9u|evw<^zy&d6QW;ASv5BY2B(JM_NU#?CWN8iv_!G%ptVc zc*uYYG+ImoPiZSg>2bH-EuIuL(wRWVz%3U!f~o17n2YfXaYR?0bZlrpqT(c_cUzmG(`j zNDL=a_+&33E#W4H=nL6(#*j1_lZ*9N?%mZHBU8nex6UfjQw`f~DjF9$u1rSJ*9-FXkR~_h`CKE*5_xVZf#~Ci^p+x=&mI0hU8A#9MWJx_1 z(yFPW&pZQo)T~kAXF3O;N2t5xo>$(G5#JaxUXgjD`Aw>S?`|rT$eGJ75nxK}L}Mtfs7hH#@X{$DU6H9L$QNlyi#t;MuDFi7FgP0D0y{Ds4| z^w;_6_BX>l)y4-D;Zox_Im1x$GJQV*lt20nfJi}5qu?_C36Eq(_hNE4*#6WRp8y#6 z%UvSYfhSC$WPE5eRPxQ#fIQDv1|*Sx_jVZzpx|R_K7e3nkgceXc9LT*Cf7M9I8bJ5^Vn< z>#D@KD{9;yaDeGYH^ynUet5qe=5{es&&KhGcmv<^QI{H=Ocjf5u1;?x7 zL|f{}Ay(c&yze3E7>9yo%2h~B*@hZ9-I#nlD4q+riXQUqTF_k`AB!3zGA@{ydOYY` zw_t2_{0324goh^!{qbCcoe1tz%^YCm^PL~*#=V93Ob9`QPr-7qDZN|ARuh!~%b9>U zwn^~A{gj-z+aDJXtL-_VvNpLKXml9*aS?+EXcwUIHv_fZ!9-!qALqhSTcje8061VM ziC=Xb4gbjG=>z-o=2shQ1O-PcD!N%(6Usgg8uV3!f`4;SA45+o)kjx2J^qgt?tqzS}dLFY+(> zm|B0h8yhb=Bnq*ukx_Bavy_)IFuNwnW!_`AH#ODX@AB>Tiu-#MZ5f`sq{*V^sX`Tu zd*+kCZS16UFx9`;u%iyt9$=RquB3l;e|GO*>UoJoUZ!y@xK6&u$J|Wq#12U0zs0+H zxJQ7v{#o=Dp8H8-i-CY%xB{Di2c<|NPZZMI^8iW_K3?ynjmzSmTlmac6d6mk-=bQZ zU#LxL|F*cN%KjYwShD}oK~uM<)Me@*fNPJIiPXyJyQKT$ksz|a3H1+T)VEf|K!MeoWT)_5V9P#dG#nYke1 zrZ*Y3Nl)^Z&NH|M2r*8=AG$)heb2*sAC;axJ`BE(+ghOKK8mPJg7Y-K)BX>CQi!53 zacwan$Ah&yINi3(SI6`2BdqGCpc`G^=4vDFKG|>w+LK;i7xx|D^Tv^I(G~T1_nsQ4 z?GiQ2+@-~wi>sTy!fElJ7@wM(2)NBNWhoX+uMc0Q_K+uTAQu5O3d(@-iTO{-dqRE5 zKY^&H6}b$+ukdATww3lTv6{+UA8yPp?yf9!=Jz1~0E6UZZ=iNgVW{>t7&;5ucE2xq z?+61k-0i_y%pkXfYEABqCnjE?U(t}K{YSf=JuTN1M_9CB`+^Q6<`)NQ-{89H&(RRP zw_r5xrS)#17A!s5a%z0*>h~iKV5!+vJS{QqPr<|)kB598FZfQHKKYu%wM01e&hTXP zk7yGxHcg(Cq6gx~im?J0K#u$4!)mnWI&0h;LWy8bjk~AD=XW{ImY4mi~sbt6{6hgKTD~y)CRIMK1Ve^spA#Z$?(|dq;mxT;&f0MKwPVU*v2IqODyQ^LYJVoP{iIH z{#tisu^cX>DAMrMOI1!Ie+hJZYI&D`>{7o&4VnD#1bUS*z-WeWu!ZfPd*ao3@nEj* zeoIH>bNjj)hCB8!UD(6?w}9Q!7BsrF*x#ufu{sebZa4#pv8p?#S=tjp$?xlI{De!w zHHpwKa{{&1h1^>$_8T8Y_l^xFCN_nCr2pMZRzex+Wv?f(E$yq07Z|-l-oeD29Gp-2 z|8IL|0#{Yl{`++R#~jc!&9qMDfTe~wn?~ff8pCo5<70;%r^Tw5Hn+$+z8Hg zR(gxQaf_3Vay~-@7R4=`cy!jmgO%jUw{?3nHe*B^7S;6kN5%aTw^oPIFKK_#(g?>z zTw&e*V1qH-A=*K5xpa0C7B@{8+}L;U^vWA{ICOhd?|ISWz7O`_OYBS8{+bZCTo6VD z(&sQ=3GC03B`VPnCBB?s;_Kq}3%zuAFKI8anwUYG+;7>Kj7!=OX}8(#OO#%dbmS5i z#~qDZe5no>0|2>+W#KlyZM3>kV+VgQYuA{;Z;z8>tlpS8#EK7jU*47YIN>GC&-zR* z!dTj-FWs>)((pE1`<82GDvR6d_|i{{TgeCR(iyBtSUA-x@kV^Swtu0_BvV23Ff%CG zmEap~1&tj|wceRIX5pXA+vvis>Vd0qe+8y7e@k^JV`WEG8VY}!0O9*>>wD2^u z0KNQkLdz{5CoKGM*FkARCOzxaQSdsqU=joGHu(@+(8XFVl;)6wF&(*kdMjmf=fW{< ziXR-4!PjC9;;ug!BLkinQp)h)SvMRytH--~sN|#pf0@?w;5IXUNcx-X_0t$m2wQp) zmrJ&uzjHyPuQmCVhlvcmDjlLy{KL=o23I%@%PHH zOQ$bYH++2-jp~i6<$RglpcB$%9J2!vFG=7Q{?y|)f-{cqh;Dj@=fs5v0{wxw#cJX2 zQsAT_*;UPVgiUtDF;*J6cno!uyfo{RaXmPMC;m^qb_-+9;YLc!YY7V*`=~M48Q5dL zs2`kUhS%Q*)MdgLpS(P7@Rwuc5~b>y)$&fl;#fvUvZL_j1e}_6F!8tD7cY(IXgCmY zBQYySJ%z~^lWlyPOiO6(4&KOofgF54ky<2T9?Kj>=PpicFJHy^n#r16tkP{YgVt>< zLs3MkW)Yu1lUp1+IA@>sH7If!Ptf1{y^5idvd#x!{KCx*GA!6%MdkHeZ}AL^(r@q} zrM?ASG1kwvM}4~$70y2wIWWIuj8FF8alg*q(o60o?Q6ESghSCcF^bYxI?vJWj=hTwhQ4n8DU+V*_?X4{qiH(%!7 zyPYf|$o+RsO}@?K)+Q&LyfH+*(0qOlAKTxz>{(>$TfEUU*TGc3+hptcHuJf&$p=jH z^Gx1p@(5G^B9jYE^>a<0V{&?kdCQ))ruyq9TmBDq_mK6zW~=?E?K-cPWF@{nI&SdY z=JO(x_nPX5Ox_m4mVQ&yeCxm9b4~q1(;n-+o#yi#lOHj8h{*>`USx6yldlZXPdA?} z`(yO86<#?HjWWpXPbMl*Tl2{%W_ZKye0kRN}&) zn1DrQl6e1d#`)|8<^VtnzZ?O`Io>#r$4kulSDgD7&K+D~)?Yj~!LEZh2cF+WUmv!n z$LC8s-6hYN6gBg?hdieQo@?bffoGYosO`GwnB*fXJSgj*4jlhNpDp!&`2S1{EV%RO z9J@=Q=^+h){TIu_%P-Z|Rt`7j!$gloZU2vKPkj>j#ZG%B$o{0;g59$&YqQ>X%e)xP zdj5z1_r^ey$LB8a<+}2mo|*2#tUS*wXKsPhTacYP$Ca1o$%yKqatks%1x2|tAa-BtG?PL%`9Uy8@$%y$*ccBaqvxr>}xoPbFp-cnWh1 zvN18!m6x08^yTKeoruNS&Zc>}>Gg|n5m zB5{J#U0CQTROznFKoS-?eID(E%5>$svT-k9S#Cj5aaI{Uc<_atjE0p{v05R-hCl#ZPkP=H(UV=N7ndAlGm|p?|cQtSWi*2prF&_!N0v8E)-8 zue&fm*C(+z%`VDtQ3ferN{#0679Jj7dLNzV>ZST8FGTiRWB4=?C6>&{d0*G5`Ui7b+lP~QgR7+hP$Z9>CG*1=M^c-y>vXA>Gn!2 zSfMvvGjgeKw%6^~!Y%8)fbRJLD>6L!>12Fe*;&?^{;1si5&ZLq3AM|8GFv`@7ilADI2ScK#>k#Qh~;OX;!Nxh7AC$AY2e zv*_8;vmSN3nUl$@uumZQA#PH9Vj?wIfz<&>r=cPJblsm%f{P)3I$ssg?a?ilGlv#G zPnx%kG0Ee2-EFl_EYs@W$;|h^0<{Ctv+7W>fPnP!Wc8v@xPvr}&P)LfbZ`$b!{1Sx znd`~Z9vb3wXXZ-lXRos@Pi9eF(FyU8UbY^s83HS&q;sQ<6oux4j2w5y44n^x`?=Pe zA>CgiHGQsh8k2OlyjSSfy*4AV_b^n^3^moeN`8E9ye@*_2zsCQYevSU;ex>Sg!-37av_9{&2Tp&Xwo@;uiMMuUw(RW1u9Ro%TdSYh`poU1QQ4XS|XzFLS8-SNHlXS9aT+S93~oqpp1a${S{!pZ8(jy!;*o zRRzVK)4f}~mtS@Ks?~)9NwAu5U5#j(Ht#xbKGU^BK|86yLa2Y=dHPY&7W&B%HJrDx$my~YVUKeePeB(`|rH}&-+s!c=>_u>lUy3 zVco%AD=_8*%GW^kdA3gf$W$T|^-)=+khFu$? zA6xp^fyYKYzV`9sk6&8xbVaKt@}7A0iL*D(-T3~-=qDFG`Q?*CH{G%6hfSlNy7#Hy zo*Mu3gHIoSdh#>tp9$YQZF9xuhR;racH^^+p1b_Hjn6fDe){tj&o|gIZOeu&ju%p1 zc=&}sUl{-5eJ}p<;;5HazI5=VVU@R3R#(Psy)zM5yx!!E z$#2~E#`kXwdUO7pRd1g0R@Pfjymj=g(Qhw%`;)i3z2kl7xpyL}##gPZ`l9OGcYW`^ z@NUDM6LzlHS-mrA*Hyco-R0PwxO>^|4|hA?%X#nd_YS`|?EU%gzwv(S52k&v=7X<3 z=((qG&*nYH_auC{@WXdLZ1d5jAFcUl-$y+@F8KJ#kAM4k=qIJ0{QHw8pN{)<*{AP) zdirP6KP&(2%g?%he&y#IKCk(_FDoU_R{vRj;TNS}y!=Ijy`%Ro-22Af=3h?uvh2&9 zU!J;e^1eIweXy_nSJS?_`>T(?>iG5auUCKl>DQgUx#F99zxnK&GxuMyfA#)P_jmes z`nRjT{rKAs2c{iZdEkQsryZPpaQVTV2U~qN;k#SDd-J=d-;eqJrti0ZANE7+57++i z{13nXFyKeuk5Byg!;k0HRZ|`xBuh;BL?;z)OB!&A+0YsWoV;e z4KHjoylHG?T>BB{#78F#A31T9d-U8fcO*V>(K{E{j6HSy;0dmzB@>@b{&vzClar?0 ze96|S$EOXu?AqzuE^m^WoOZA4`}7Mlm$~<6#pbNa{o~5Z@?OmE;#ulFa#dE*2fmAD zR?Zqcd()hlxldj*@VXaDN6mZphSVEtZkoT~j76IkCoTQ)ma?+`w|#Q^O?Sks*t>H1 z-HEFl_ddU7_I-ozKl;G72Nyp)<&m!I4{vz=@%x^*`pHY48u-lV&(=Qo&6b@nR#rZ- zZQb@&uiUZYw%3=vx%}(-x}FAR^_D%YgmmvHv6$M$%lhyI{cN#CraGZyR} zcmrpLZT=}rE*Mff`>%4gF8T3!C;Bg)JEdR4x5nOe_9Z>@FJJP$EdQzW4^qnC?lJN5 zD(pY;=TLwCJpZ@kb-mk<;X|Jjepqny=au34$@dzcIIcf3T3Kph_h>vlDRi?K1f-8eVI1Xnq!S=%PaG}sf<{du3%Qksb^sI zlvvQbpx+RaBTUH3)KaFNd&~0_WTVL}Y@e9E{rV3WIB2lp@4)|PzfRnU_=J(80y>5i zs$UczH`bW;P+Bx*6By6FHsU z%r?rzvzlNGdCb{C^J$zhR~YcM%v76G6{&i%xM)VM*U5ZXo*vihNw`om@^+|Ns{K7Z zv0CJsi4}VEKAt&2V}d{?yS3vonXPBOWu#N=mElPGY-i}`Q>i-U*BQr&-IC6XOwFJq zo;V|_CuHm<$C*>GdRigf%?QoyOiYMNQI^~4Gqg{%%(%LJys{plNOu1IH2S6)W3F={iXh+|(q zR=aEavD#|b%aNxk9BEnu#(Q*7bbLFb{I=@Rc@Nx5v1W%EoEtMeX5u(y;z%Na(UWZs z$QagJdLv7iv#j?`2}-aD8TLxb`z@Co;4bhKXXk|4!n+adqINKBh=>RaGai)jK=np$ zCTF;3dl+)cu#?2sS;`tv8rhp+qstgz+vZWN3C$CuLr7^ zE@!$cV@5X14|v9yl*=zJ^5I3NOuFag60OYs6;jSfa95r;$8|n&SHSEuvj!P_v|;>Y z+WE3Umm5}ySBB^*mMr%y9QPH<+K~QfbA1N5S7X%C~J%>KT8JGf-=EIDix{T`gLoKc6{X}ze z&P5{Sdu0hpmvvp0>WZNLnzzV(RWW5r)@Dzvc>VDnVyd2MSLOY{+%p&int(mrZn5Yf zb+8pbW+d3x-gLS5&jT6}BIdPG9d)$lQbXuYNP#=gndd3;8Rl&Dm|>)77J27H8$;c< zGHbBOA|*CEr7#eIQU}--R4Ly9mr*!2Wc1c5Z=D0JGRr zK!ME6^$ejxF_vaoW-ZQ_6;3Mx58@^51#yWG)BZX8}65C`U*1W&Rv{`4Eyakb&*~w3)BNb9LHF z-DfWGpBVRM`dO5I@#q94iwG(^Zd{zojgL=KMI#bZjHL`^4St2k-1gOvt^ySdQVZ~YYGZbg| zx1jj5Tb6WrC3K+;gOjy)Q4g)~jSyMyo4syvMcUaMiY4~tusI~%O%axt?F%}l|1)!0 zx-XZLVIF&>4^DNeyUdn<(&J z23E$xg<1OjOXm$+f9-A zZHs)imWAd;d|=a-&YHL(mXnfF@%vvDx8!FI=>2PA<_;DkAm;^QV;`aHs0T8sfAy&bq5(lrRQ& z=8$wUa~5PswpYpS3pyW0{eV3--y5Szs*wU6FM6MV-`rKjY-f=Xps~HkutjeL8|L5I zqT`JTPBmFeO0_cCBAFeM{f7~zLZqc(u^0&YrN!z;J#QmYHS-eI{EcRrzX|%8jq4n9 z)xS^gnBIfLKpi`jbT*UbHba&_mH7&h$<7w`pk*p|U879XHK`QnTd_<@TuA4Q4P(LM zwmK#mcvs&08}ke&)E8ENM*G!iZ6q;An|jYlk*vkac+@M~E35+O-{&Qr@4%|CGS^q} zddQBWoWw~f?5Ht@kS?i3mDKSeO1|XrlR}iN%&(^zij?#t^oBt?5fWg(_sqVDbhu`? zXV3B!8gpIt!M?FM!?uG=ulDPmUd$^P8>jHN5f>RQ7I}@i73ND6djh13OR5y{Xr^sI zG^%jiHYZAKI)(JlbD0_;U*Pp(c8r-`wL+$+k&OD$?2cNoOf)iX_df-;J?edC^g3;u zpK!%khu4*YWw#zXSP#XNRz31E_9q!#c16kTMZcJW%t&7AXfx)1pt=m1lY8_G>WVX+ zlk1wNvi1CYlmRmi>nK44%xJCbiKl~Qbf*Jbcx0HS{Bt;Zqm)tVCb?!x6Xdr@iXv0O zir{33hRl~qrgqV7F3??TQdYlu0U4dmnhcetUtzUCGu&=(s%cxQHYa=3{4ZMVvf;QD z-}=dEriVHHl_6T5C!1ZK+S_KaCy8zP^$gB}%os`Nx5IK$M}dFLV(iK?He#`Lz&|&o zM`p$ZQ}Bcqk)U%-ij`GuCbd_S@xJs{{Ke4Nw@cCzTOQe$NuISbc<3b8NhZKJDnhOr z(sj7h<5Hgstg73=Pc|FK-h%{w+`2jW5q{xv$}RuoC;NW;@{`-CIlYQsOZ_MRo*E^8@=tzZmsYm@6Ls;I*r#e$t@uUk zkS`a+ed|4OQ`{3X;*PkX&0u$3_F7I@`7k&O(yB6#ruXTxTTNzS+32j3!RY-4`b(Cg zq)y#->E5<;1pA|%(`@ooLmsU=JEn&5VCp23XH0bwP1Q?s=vQ0n#)HlLrT%WG?%fl} zL~}T24N;{C^mOV*!^~LHfs@I1uij!*SN%fSHr_DGozBR9du4qhxQYzY3awf#O{4nL z&45>|@S8IerapfdhKmdJgo6&>2|JksmP);B&On^pKH2te82oE4TYF=?ru$D|R{$U&>JAdut z3DcBrgDefR4^WRkihQzYBbNWghYY&IWaM|LmT^_K&FKM}3}b1^jE^dql}gq7aRZ?V zbW!*|Lk6@Av_vg1nwKY~jhUe_J?*djgPK=q5Y1-0u8o@x$3(^Pa}| zmmI?cfI{v4&&Pp);e*sYeM;?Xv93H)d9h4#`R9T5R49 zh>_0d*rYUXX<2ziWmR>Jqt)4c;wHMTx_;SxPi%eni=V<;ca9m6oL)HZwzV6#?c94P z{M2*$#!t#9y5aWwpL}`Omp@0e>C!JDCDS*5`2(A_@80)IgSK7!kDTl-zVVKAPyPG7 zuYPTKTDJkCrew{$>COkAe&zkI4>xMpecuprInFMWmV3!^6F@BMNLG) z{OxU0mhbM8`M|z@zD>V098AUMCClZe^ANhBhAJxd9&m6RiE_CTmRkAxm%7p z;;!G?YT~kY&vxDSMW3sl_^H9j8~@#Q@*VGWb+7xXfALelHc4Fg+Ue8o`mjgtzrGzj z``O={k6Zdyr^{D=+ADv<_rtDv;aJ#+dD~hi-?p=J`r5rQg&Pkw9Cgzxr%k!@{cc$g zem!93(}$a0wCME?m)`x+xmP}NV91>3{%A4&mbcHm;@;1C7d-aEh1b4#JUsq}mrtE^ z`>t~`?*FoH(UU(n8h!Jt?JimILHF#3z8N^{ncq&ic<~!&Tz1dL=goNZ;00Gd|7Xhy zx4v^$>YC5b_dNdN@atZxRi&|&&hoVC$g-rW=n8L5;{{`OL_M6dzx~Rodj@STITA5H zVSAScGWWGvp0c~&Cf_g3mW+L~=lZ32>0aPYIUe{XQ($bWZT=l-hg z9h2Yd|5Wj>&6kdQtJjA7?>nu&{L^7CTyre^hWMAyxj*B}Q*WQNtM8LVKcBMr;y2EF zbjHCm?z!ya3!cCF&qgXDZ1-y^+U`dd#2Gv zGnP)7j*)L@iWo=fjRZy7D!$^PP9rj9E&{hNDda=RzqQa}cvNaPodkNt(K(AYyui&j z3D(vWbG|rWOwY1Ozup`#8tE4p@r8^n_kVG`_6@KZ+yfSX7r1}(7%V;rSgb=Q6|`xw z9{&2rmsUE-@RguqM#qi$xl6P;PwmRgbWZkK28{Y!&yy45MtF_{x#wcmrIpxL*_YdeCL$QHy$(nXL@%k(Y@Y0CUh zj5CZB*B(D1p8jG1bV5Pi?4W+?ET(civx=NUhdKMk%+Q-Cj4v124#ec05j#rN``(4a z_$qb4-+#|cnL*N22R@TD9rJ%is?%SmyqOD!g!E4(+;)BD&QH1kcQW(!uS3mBx58h? z`%2Q$N0e3=;!iA$jjCztJcJ>OcUq3N=Q+|JN|K1p!X() zKxXQVk41IbW7Zmf1)GyEi3}5U>znndtsvEH&hMVNC&qI1B<{x93a8C~`c0z{>xnmJ zDBT&kS!`D_0&KZ&#gmL|rT=L&XBjaorV!nbc+=IT{_gNZbE}$iBH1amwco+b;AkMv z9h-39p*ap>={=pKXC_itJbGYY#+r61(ORF9CW%kJq}?{Ed^Q@&Ha=s3L;m!~p{`CY zO`UMDYz(+GbyVW`#7Sd}wRWRZZp_*S$48wXh1nv7M$c+eC4<<;(}}h(f@J_@d^v4b zHJkrjGssagFbes)meT_m*au3vHG>~K9<@}h$dd(O^DEPkWcKIRK>X?^QtwV<=2@zI z>cv3b@W-=l1CH6W%94Z;%R!@SiH5+ay8ie33^4YQ1gz1UHT?t1hsXBf$>QUL{GCI;jxD0Dd~4&M zE&65Ld1B%ls(OY+GM26bWn3CC8Cr_dtiY7O>? z8PAjLOE5CQX4EEB96a8xRhm8E8r|zQ6*#=$YSe(i; zw$22(6YL)u`uqK36(M~phQAzWzsUICG-qv3)f4xGqW%f|arE$J^_n%HpPV|OEtQ6m z13ZRs_$t4+Opd_dGx4roy?j8oOV`xBiun4II#@ZKQ*sM^#jd=G#crB2vsIO7>?%8^ zc8Z zx5`v`{MmnASzP!3j_AI-Qb(>cl&pS>Dm9-ib<>>xMN{8;wy%4On*MGkU+c-MI9@GQP*Dp18bHY9&X6%-Icl2O0uROhj_@bk z&f)3 z?&8@>OY-S(SG*_Vp__LOe{x6K;;2Qh4F7ZXnxs<`b`6jCI4s{(a1> zd6y1-spz^-C$#13tGa)wsi}DxsZt?(8T6;he3J@N3VAKg+}6qI0r@U^x5l_9Dq+I7 zxWw^2lwVu6yz=D;lRC4VQIir!qo;opm|f7PR2fSl=IayK={aibgiEMGm{67-)9e>! z)r2o?aydhWlZF^kxt&o-V<$|Sq-{#^`06#4;y1;2C+roWf#bv&>CgEaW$CW722kjh zLr2)9N;e{E^7sVH7gn3(pJq|1*2j%S_mAoCjFR>ILNey@Ifn9|`tYCn@Spnde@T64_4EGWdSW1wYYKsi z4p&L=J+0ZVi(C#jX`@s}A9d@6DpJgx(0cpxXivp^YgDcrrIQp=H};kn>pQHL9LVzh!B2~P*xk<;L% zpbEJRZg-|qdyt)QET~2neiiITu7V#piu7JM*<;XQ~qu#_7awL2jSdZ+4e*_g`2A+C8 zafqA-?**Gh9ZqDfXA5!?{8?Z8gj@|z>95poF%OsUWz2WTrEu+F;w^@_8bUgPX2?l! zEHgdrk%g~|B@ZB%!n;8day9H`mSj4z7k-|ZkWA!C_!yXrtm2uMWQJn_ayfj#NWzO8 z3vUPI$W`#%(S#AX6#hMtupq08co$S5m%|@`YUFCT$Hn9U5HJgdUUUO06kGvIv* zBYYUNM^?#7wFXhhPIwmRiChZb0s0}A!%u-h$dz!XN#p@B53fie>|zFvo<`V_g|7rT z$X>V{c*P974U`~P!Ovc*R4H;L-0Cvo0oe%;21}4*;b*3kAH)otb2(u~_QE%Uhmp(R zSHODYDtO2h#1C>T+&z_eM2?2%fhsW%k4sbP6XYa#F4&J;3LgM9$Te^?7ian)N5VZp zL_h3-uLRAIz3>vy9=QyD4mgo3;U4KqbrJLMqo5~p1w1E%_(U#+SAkgMa`;J*fLsYr z&7=-NPJ?d;DPl(0OE2b$Ao-B3Ht@fDgGE{uPuUt1Rj(Fc;Yg_XVZMvG61? zA2|&!0t=8!;oHFydf4IGinnLNmma2HU891Twedyv!M1)v(a z4BiO#BUi$EK@D;ZeD9UijmYKjli;YBfp-DbpD@A=XW$-kBpkzXMq}hy*q2WpKrV%o z3%IigISuaYp3c3m^FhITB6=NyusN(;x-85hkfY&oU=MN<>;s=5m%`aslb4Xa@DfmiTn66{enGB)r_UuX zA*aDrAYuUV0GD1vK0y{<209{_!-uXV4JxTBXSblY8mN;?1bZPCtXAxz8lO%E{BhTQe?H9Iv*?%^Kc9(Lym>h z!E$6Td^1>yTn29gtB|YUFF`qS4V-xgaW3ZJhrlM}3ivCqMa;kp?xg%8m%)iElzJ06 z3H}o77BlcQt4SN=Qux|?@vF%28=%=h+=bn1C{xH@IC&%ShMWe!3KGN&{5u$n%<+M0 z#52SlauVEaGk!&mhHnC1pLau=0w&8E&BzW~}gcrFSewr_$Hj8=q zt+z>UBjK$e6S)eW^95lM^Kkr^gatVXUIykPm&4mZnV5&q+lT*ea#F6l&JsfD^e4-U*_StKslpC=1Aua9=P6ITp?UNyuLK zb}$vW9DW(3Ay>hFf*fS^D|z5BafKWW-waBT%iy)347mbs-_W6!BRk<{O&n@HawP0& z>QEKPUiccW(%p<)3LgO5k!#@L+!nk8ITl{m!lB+ou7Iy?=}=W-9=`lkhuV#t20z%= zq4tRxcw`5M+K-$B-wlo;m%~kaI_T8k2l(7R4%G%Z8g3lpP*I`|Ki|)xdLmcC&LIvp z2w8X@7=v5}AG*My#v-es*gwLdQjp8xo8uiSP0YZrf*j;3_-BwO<`Wz$A9#_ya9i&6 z_8~jrpFpXY8HImFb9)$aB>V^{N3MXw5{W}mhi|-?xI!+2p97yDSHed@HL@D(P-lbv z$kFgb@Evj*oDXV{y>RR}hx!Fscn*lTfVhPZk9Vj@WHrH|?gvrG6>ve4Lq#Kd;gu74 zAGsX9Y!Y#ToCYtLOgtc$!C!+C)&g{t5hNj3!s8#OE)w(bwO}f8DZC7%A(z8XfJ`wDzYTJbtKd-; zlmX-j)vpG1IS6R4?K)q3f~4Qkjvq)&D0Obk?>-$8MzET4l0q=vkvud zupPMyKJ|Ih7}*J5RY|%dm%{zGQSOjq;otsEy%Ed1uaMtfrCmU-fIkIYkgMUQJ4hSk zNcbHPja&u)4hA8s*Bt80H%L3=8o1}1q!Ds7yar4~E{D&4hj|*{shZ^=ic^f$v&ijD&QOv{FfKS9c{O^wmFLD+9DL8^$ z4gUg;BCAgvY7$U!q$7L_XpCG2uLf<9%i#^6J#q#70_ccb37`5Y^%AlZ9uK0Bli({r zKjbvH1Pnqhg+Kj_e2!cVe^X6c!~pF_R(HTgiy!>8>hUm-i; z7r_$bO89{T+p2~(Spli*yi1=$PV z3bu=RcrDn0TmkW?3b`Dv2A?1cpV^Q2L3YBAfnSg-;IDuhiQnLa{=^S* z68r;bBkJ%Y14wJ+3iwIT6S)%ZH84y?BS*uJgIF;GPZ$)Yl8}?&Z@^SBGdN5Q0BOjv z@FjaNGDWwI10C{{S{2S0&)? zXyOgI27YM_@q=6mw@W0?hIAJ3nxwtQyr0$ z;GxOnc~OTaP9~oqr@`H)5MJbH_;ZknTn%r%gm58O!CBMD|Hxjr=@nsW0dgcfKZh_P zm%(RVLs*cV@ETBsTn_ICdys43?$?E>eaO-9`cld-as_=F%Q2npFEFT1&_Uv@+<1_dQgH~0bh9&`5f5`Zv;z_E8)#I zlXfD*-4=wYa^z_E3-B;<4Sd={%pp7Bk&CD=kdxr;i%BEoD){3igb}$K?y{6HB1gly zw}h#q$X{XD{aZrngMPLGHVPYd%pl2ALpjXM9~ zMykikhU%OJ4OFL+2-Q9(T%GD@rJ6;blGfDQB&l&_!>Wktuo_3haMf^IShOR}w5xd| z)!flp1zbkGNw{i~L)l127Pm&&+_LM5AH`3?V%7>@=sSkGSGzp|x0zG+ho`Q%XcVCu z#e_$Pr8&Gh>=J%KXt*UTVxJWjF>^{ob&8{{vV81l-K0Tl$2;nja5KIu!>e?hS$5jp zvch5M+1b*QbV?4ymLsx>ikuf3%lM;3W7Q(2X>^mc#@u%>~7a5OS~kTX;7b? zq3I#%oJ{@}zev82v`r7m=PetnmX3C;dk1pA&ifl}aVqg{*G`EuU@3r$jV3#nFxap(Dxfce`IL|66Q- z*HW{GyHS{G*o|>#qOA-9odDk-QP=zCFGyKZ@T){We>DwziHsvOYH@Ond7vUsoM3X1CR0 zHne@OtKE~Z*xPk`SR}rr9+0+E!V_xN3Ts_yB=+ny!*18N@}j&e{gTjUamTVZ)c;~< zvT3LFekh0f-zq=##ZhQlp3*>_LO;acPKMh5SI?pLHEXDvVV~dM5vk z6b(z9bvE;=sN2!7L2%zm^qMt3vE3H+rj1l^F0V&T%-Y+g#tnnpOVPL5GAm!Cp=SA4 z^ex!!3H7VQ&t9vi#5?vhZPi4za@=&HeUF}8A;UPs(Zx=P)m z>(lvx`qZ9xrR;4Cj!lR5bJmG|w!dc&qo`YTkc4Y*9e%OLudW|9oS3$ub(`*kb`S3B zS?=im&**X-FRY>E#Y#_moXNW*>WC*%pI3*v z0i9p z?!@=(ezVJ=b)1#X;_v$6q^@>D@Y>#EP{OMAP!_V}>; z5*qH%XL(=j-d0Z?P@nyxZozWP?!KjG53jgwug~PU(3TJ7{my0`QCHkpcG}&s@`!|? za~)yOXc7ym*71Eupl#J|-f?1?llSa( zlQvgJdr((DBJ^GHx8*;397~+nRhLVguB{^v+4G$hr**mCs!4-Z8=HrlwRUBLs_<$( zXJyq(p?(O>|4kb-pnQbum`=ivl9swZMV!Qhl#>x=8q{aE^{%CFg+bV!|LlIU%XTyN zJY~5Xn!hbGVt=S!=(A-u)Nk@EWiX~C^J=FsuhvvK7c^1rO3XIa(LT_p6gyg*V;^}( z-j%#6JkR#rqJe6`yj&CJT6-k50Z|dW7tstT6Q;Y)S!7xlW;R7Ds|dQn#a_U z=3+KE#H^&ZJss_FEOEchOw&+#uc9)klT3h=kWo2F+Wkt-{+es^)?RiV`NPYE}-JJMy1ZM4OmVNfPv(!S< z%~G$ctcRMd%S>ol5&I<1+1(a1q2n`A6V&B@EAB=Av?l5_=8YrCpQn&N8=C2i)<3`h zW-+kg=d}~XOABU)>$I&w7DRc&)&8Pz_3$j#*m|>9*`@S8OxZi`MUEDvD!so(_SMMu zPV)Ved}Aehj%5$B?5mM|HWg0xzjouB0QUIGUYOD}>|!6eIvYD++0!q3@a6l0*euNP zZGn7KAm0+mHw5xMLhLML0s69^z7m%2s$?HhxgZ1csL8hl@~weW3`cOa2s2EWMnV3F0h0c1aP=@+~|jrXeAFZ3Dleir&s#B~~G zNjKT+FMIrDzntuSm%a9~Ki^B3WG}Yt&6Yjlvd>!fe#^dX*&8n3m&tc-vUf)I)ySSg z*#jv1(`4_m>}8gHjIsw>_C(7bIoS^<`xa%tqU>dqy^XS8t{ljII@yCK`LvgFIx6V%f4pW_b7V}Wj|e- zxP|{@f1KSL)gE*OF<>}I0-4}CP!2YOcfq$H;<|9v7IX&Z zgP~voxB|=oC14R)0UiKPfUV$N@C7&mT9$^Z?qCF%2C~6*U^RFeybbn)@ax0X8DKC- z23LalU=4T*>;}Jrw)2Q%Fa#un8Q^MgGq@ex3!VU5!H3`gaNH2C+JU|x7EAz_gDb%- za3i=ItOr}bTi`Qr5F7zb=ZC9KU;u~*Q-BBD2$q3+!Q%kph zEqDrS1Mh&Zz#-6TQMl>{Qou}b4|oo|3%&x5#o?+oI2T+5rhpk>7PuL#0u|sDup8_H zzku*1;p$A#6AS@~Kzdzaiae{B+gFXaQ>lq+s!mbORCCpWi-;n*J+HMoRkcxV)oH4o zYR{=>9n=}Bqw1v2RA(tC4Q*$2j_RVis&1;gic&q)x#~RCQ}yCp!t*)mt&fUPeN{iz zUky+L)gU#PPkS#=L)9>Kp&G7YRh$~3;#GngsYa>MYK%(cQ`?KxST#)MQ>FRQIg-TUv%B9j(hT@hyn&51eqjJ@iY6d3&=BonbQC@Ww zXC!hB9F6Hr8p9GbTg_2dtGVhLbuEolsk&axQ#Yvj>PB^wx>+qy3)LdESS?XY)h+5) zRi>7y+tlr9xw=E$saB|!>MnJ+x<{>2tJS?~jVf37skQ2U^?+KZ9#jvhhtSOhZ`c!?UK3CQ13$<5$srIR_ z)Ys}8wO@U!4yc3bJN3Q#LH%gnAITZ6eFpT-v!5$mB@oLeFe{c)#5OOFh&l zmb%?$?UO*Hisf2K1bs8D?a7_x;)pq|Ag3AX%NHeb~_}70fd9asrJ;vpQC#c%PiXkp-@EN&KEHf^x4e~oTK?TK+al??A z6OEgOtOvPq$nvF}L7bZD%?&6Rmum!N34KLus!L8K=F%Uz)G}b444D_C6%yzA-J(=Z z&?5>ma)Mtp)VUeKmIxgF%SFCLMO=Ov6d>CTwmLS71A!pJ=o5+kmZK2R)wfhz;gzGB z{l?@W#JgI__O4vG<$ssc^#c#o<1T$0wWY1EY4SgCy13u0zBbI#DJCbR_8H*U)X#nU zgggf_4#k&C1q-Y@F8$UN5u-+ZZ_g@n-K3d2gOX6I`!6L4ide0s^KQ@^9BY{ysA@`5 zJy}_DA(LIb|*Uit(DD)K6@tTo6{DCh?tuMa>=>+GP+4cA>L_NfBe%(;N z`87iPHoIQG1?dF*W?V)};jr#0)xk9Cigb5&Zh>)umTsEmj*OFNoAhWOo^Jo$1xCi!4>~FWdinxev0G~*1hj(e@K-U~T(O)c?k0k`{nmI{%8GS4 zwW!Gbw&?rY1pREU3jzvet06Y{`xElu?@!1BC$Af~f@}A*id;;Ps;_<54vHbak}dO# zS$}UtKlraM@Y@x**gW(_TL;!iD{Vuz(TIxd@5xvX{+^6oA;enU!3p$aw8GO2_xCW_UP}8iBeOqg`E2zxEa&RM4<-sv-B^Ei|k%D>a{>G!)9ebE6}5`YiFlRT1lP@ zI2uq3Nm_qJD&h0@)%1haSF;{M-n8}Av+72Z_93`}`e9ZJtYL zIk??_<8DZGBxZxOPpq-(FcMU4ouGe0-F1SAx+<`so@=UgyN5rhLE3=`*4@#(T>1qe zYJt4wZ)PPrjLwQJ`&mQz&HM(cxVRFP>MmSoS+}`BQCigUX zfXO3F9&7RxlhaMkGkK=TRy>xP&r3{RZgRQF6((1jTxIenCVyx0QIngIm+ilQ@}&_U z|Kv*}9{#)J%RMT=O<&v{FV`2dQZvcCH|>ZTDWi{2W!2R&vLx4+WK3+Rw;ZG0zIbE4 z+fsY`M76|BwbQ1Wk|RBD6jfvx?~ipA`9|ssq*WJr9_Ps{&U25UkDKR?<1|iD6U*a_ zOWKrLBr20;bH#Fg3hO;_MWdK?5=pHSos`^+8Sx%&i{sS6utX+!xQ~Z{LugPU!xM`V zM#N7Vi(f|2Hy&A{)WzXE%{;-VnixLTr3X6xFJYxhT_H_?F|N|j)-Jm9{wN2^+YlfPI09(PZlPs@h-1S7{z;t?h>DB zB5Gqjo*Bhn%Pl4M`iMz+ zZnsxG7m*?pRLt|btwd5=BU18;h^#5DykfU{JEC4o)OQi4qr59O;VJclrJ{q&Q7jFt zC`j@6~QcX8khl!;! zr8h8~xl66vB*K->{m80ygv;k)U(>0=>}6^fVJ=gut`S)o+}^}qsO}Lg3(CdjDk>t& z=*p@-5m_FuyFm4i$nqBZGSuJ*meX9BYKSoJ3==N#s*w>{x;M&!&=J{`uLAa3gotaInsewbG76p-LDggaIpU-qR^f1nTabaB2X|aQ+Gwk z9aAp$s;!G)fRmAfe;*ae^!sBXb5*KRPl!|?)_)T*E2BuODdnP=6*5=Hxw?wE8l)!5 zyoVUIW|qvI#L}KMx1Ob7#iX+4Z<CabjUqx|Br?G|DWKLbLNtSwmhxe zTMpN7o)i?lZqT}ps0u_7*Tl;Ap!JJXiU;_ zjln94K0Yq!zZrx{&CO5+xui^x69X24==M= zCRVh!>}-B%gi+c)OP_Pwr>A#gs&=GXET>s4_O5{1Da9|7I32wMM0C?%CI#qkd>f9m zPi({WvRLvsTI8iyMv{0WV)kWOK01TIZ7gzUiq-$hvn(%nHv)JLZ)52|3_HbNo}-PW z;3TkFT?Jhy0dZ6x-|e$}{DvAaiFg{7(=+8+hL7(v@mAlh2=D8OA3GBC!qeJ1p~Esh z)@PbXn0F=k;sCrqo_$V8=jbz4q~kiGuFS5x@HG87EQO9fvqZWvJpfn;__=sKe3Epx zO`lF#%X9G4*cwjp^jA*w-7fGk&%t}kSpdAUZw69=V<4s(br!`XbZxd-O8s!l~w*Zk<2GnWLd&7XtmUqO_JTWu=KyTm-oP7dbNEzztcJNSk0& zx)eH$bW5p|svk9FSPX&+ZW?#X&CapTo9lx|(>T(v-7ZJ0=NBR+2zU_)v3Dxun7W!*U`Jq}-vCk|u@DKvbj+r8)o@(TB*c zhzuX{XHiL&8FD0Z^%yD|yp8#?hbrpFB&;4~XG>!+^RDGt7C|j|nyiA5#9MKZI5T_mow>!Jf#)`#FB7MV&4#MmhVROQpoI3Wk(U_w7pT#S42zokaE8SbL41Vb zBZ%kpPD;=E#i?v|DqB3t`ZDRg#xk_l1x1@(N~81eK3B+*&wwQi-cXtR1hS_#nNdLi%EnKbBl zsV6WiQ2~> z4;&xPi53%~6>-jXEyvXIdnc~I1jGc6kEHnUSn93SPp$;mgh`GJw#ktv*HA3D`Zpx< zR-vvm7;{}mp{^)>noFvVioBAm=Q?ytSxJ-TrIXwU6f__)BY+1{_7>x-_zfICozo8$rQB~WrG%3^kmfkB80phF{n;Y@M05JKdV0jk(d;WQa_9`O zX}>~uC-gPyKG~da6M!O5=W2{knKt~Mmbv(usW?TndU9I+4frEjwVDd6jhSZBEVQ z7sb56Wh8ts*}D0z1(fq?3MX-pe9khLe=p(@UW$e@WWlD5P2!7;9&aQES*4shOkKbm zEKZZ2h)GLg@n@FiB0?Q8OE+h@_e-JEkk}i1@UAQ=R7G+Dve|wVgH(gVhD??Q2Tz{1 z>_Wv4O1^kANdH&Qm@sz9`HJ)g0-G#->GtNb=m=G+-kMoybQ|$ zr*uQ?fHbB-edh^;q~0-4$xmLVlI5=_c`)>a(&*~B22DD93{jV!ppI(mn+?fhO{3Jp z0#)+?rBvU{FzP_;@r}__Aql1i>Ty8LCFoRYw}Bl-Ghl)?r?kP*K|G)nC`65d2Q^Wt z*8eEUNL1*#wZ2SsCKVcq5?wOJ+)ULgB3OxW#Au56UrnYBgHrJFU&5Y(J%jPql|S4Q zr5}vEV1^5p%lsw~LBs9|>2qaeja=K57mm&9bP#P(i)6VNJjy{lbZUqE?|bKO&Aj_O zt7Y5Re2A6ZmES>6;voCUoS)kA#Oi*8vP3}&PUuG!fU1Q z0^*FKwLFu?-;C4Q?|-7KVh6$P{M=#&j!%CtoD-8!< z^?wGjrP8|sC1zM^2ZIVipjUEQjfsECCRLq|`AH`lv%6E0S)7vffF}|zN2uk=D*S3& zA#T(dV@9W0w3~TAvZ!w%GuW!VFT!FbEJqgCFqVHkjfdKeGj5ZWeWKcO%MNOL`jexX zC8%se;Asr7^w$uG>2I|!H9%H&8FsJTT*qXuD8vf1h&8#ghYx|JjG&0Z6~ zFwd8&*Q#An22E$X%Mk};D&{*4gN=c*iB&l_(YJC->#MAgg_sPto2E*K;K-uhx zjLk2UX)ZxMZ{0!ZhU}xD=Abk#`w*T|pIWIR0fHq2w<($r*VewpfomfB}d%gv?G7!3nELWbYSdNOEGUScP8QQ%WDBbLIAhaH! z8^!~KT(=-F7D;Zt)rB873LWRP9&|~)8>Q=GWhLv%q+#oZPFQvtn7w!Sn9Jw>bhIHako@a zA@c8{{GTHKdY95ptxOtZ zV=A1(T_x!*X;8XLNso*eRbrP0*|AS==H5l)M)aRkiw+s`bwKLX7`fJi$7)ydZD@~ib?WwThQ%v&jd@WF#9%cr4gNEdQL^trlAa-xxM(g9{*fEka-l>6#J$%V zQ|UHo?tWB2j($RIMFf;1h*qZZho8FqoBp!=(#cc|l??l5TvM{%s5B_(RN7&dqv((* zWE2(Rl?pyfR_=I6R8F42wNF+t6eNk@YC?|fWl(*D4b6<1B}G^%*wr+{q(~b@=0Xg{ z&@2<0pwqR8(g}%I(|C1l4Hi|P-EJsw2Ab&AC0!GPD*|4SGD)s;29D^FYXV2-!DMi5q1gf0P}h!>j%;!g!vkqQ~;ehW+&`OXxp(X zork}c3U(kPB+#DyxIjzzR#EbQSOwO4V5RWQT?OtKvTh?e2HxKhRY$E z87eRqSjS?x=)HzxP{*;g&coYDtr3bH9BZKINP7L1B&&}K zdxk<=5c;?r>ZmBzbDgUvQ@#6itHr5oKm~H5cukD=G>39VJvo+OU7D!jxOysU4FI+9 zc=dKl??DONP#dVVlv^ydM?mqol}d-8OW6-^-#R7}Y1SZ6pGe~j#3;4Wp+c#3DIF?Z zJ&(8)R~XGf!|n~}g5VtraVi}`NokS7Q)m!Hmn`(M9U&*3JI-6s{p=T?4%)Rmq(b2Q z4iv}~fwNn35!egE%dkAeGu3|jUtuv_Xl?(%Wcmo$Y1$w>nR3Lgmj0sKPX&}EIUk8; zDxe6)(c^d^=iQKdPc+-dkDLeb5Vjv0k4!zb_@bFKn8?awivY%B4Lzbc)Px=-u$3dt zMj`Swa+1t{0F6gcRD?XrV@-Gnds4@~L!`PML7=t60u0=0Z#jMpWd-&L*bs&VXfYMG z=`prk12zgNfm}8jGmHO@)eI$&Cqh?>Pys^q)sm#n;2z4~aX)yBp(|*VPYcG2eO=?VrDpI*t`mCWZ#9J2$UjOzvp&?^&8#;(;CTW zipWl0qkNI(0;F*Q)40@Ru-|j80x(`_%on3Me?wUF0T+!2fL~1EiF){C^sON#pOU_# zr-8m7wZEkAIMNV(%TtpPea{1Ertc|)&GbbnY|y9AUuZh9PWe*3m`ID}{6v16X!Z&` z0uzM5gkudsnzN8(H3Vb&o2<;|$x1XQNX%3sLY}jqBm~NQ7Tsu0rGT+?N3-wb(0meB z6m>VJjF1GQ#D9o=Mj-a2y^yTBD)ag9EU(HggL^( ztjwoQ0HK}OpJaNzkm($+2$4+tI@1hCIe=L;&1h~Khshf&4G~J!55`)kvH?p9vT)lM zeuIfuRPL$Xb34tzVpwtY4VI&rH${hF(ht<7Hdz^BS0zdqK_HUjdnpUP_eqGKg~@#v zSvmVQ#E3FsdL;BU1h^yzx+t1+Gahbbf6-dC=4Vnx@y#rMk({2C5uNdLx#Vh_zkR%? zj1K9$LRK*Lr-K~-Z=Oh7;3*P##^F)4R+|naGS*L`IogXLCD|W9Qaentwf85&wrcIa zh+Mu5X)(u?Lj52YMJ;7Tdxh65eo>--bSOrZoi*h0a|TzYsm}n99JzvKrdVY9&8>VZ zNAJny3H=`RW&$$D{Hw@aH2`5Tr8I_udiR8taHM z0jX2pMj6ghIe4_izn|@0NLBGov|NJurgN0gP-vu$zzhY7l~=5j5&jP9^4oyFfp*6lw>nG0U`WoG5@_aS zm{3 zl|VusaVZpRgTj?`Rsq^MoKLJLJ&v-aiWNv0Xy$c~P!*R(KI=fUSc)6RF-;tE4pV#y zm)4!$!;?@NoaHcODi#6_rWeB9qg4}F%%=j)13BM^gsJjHE=?@zjYJIA+bSMlnjDw)={zhWcv zht~b1@ORXH)z{J5pFw`ySrup&%c?7ZR;rlI>AP{+WJCp;b2;z3BJV6yUZZ~tdA`~3 zCkL8o$A}av=Gp^KV zE(mJra&({#9#1(sYMq_@J9aqlW7t^JctE;&4HR&#KMwTJt9oZ`cM|+$_h9@X{BzCt zSN}EsTXg*K=M(MA%o=WR<9S**tX=?C={y#lrqaBgc->TU?I(*ID-$`ylJbHz6k(tp zY|cN(>*Y;XrxA}TXd3~-*k?oA4)A7`!dA38$|%~LkdiDQ0Ld-DX<3vA*#WCDQ}zy-aH6X`i}+;oKLG&QJK%=C{+cN7K681H23m(s0BNZbVU$BX zIl+N4MhE%@jMN`sQgsC}4mhUutYcPVabB92%Q&uw**1@tv|t}at_SJ!cs)yLryZt6 zNPRttgng93=2KiQsa$IJ>m0?lO1!wys^P8wK?3h){McK=|I=Czib=K#a< zfjSx{2DYZ11FV8WB-RP;wMj&CQATa|VI45g>>~QgWz1Fx&+ zjpJMjp|g15#uDQFIj|AUs{pvc!R_@FJ_*F~x>vj$@s)Wc?E z1!vo^cFPnT~1y*ObmB_MjO%mi{;25NL)9m8e0}?|3+CuoPoa2j53)ST-yj2b((0d>j*lXy(t9YC_j4 zIjyl}hg6MCgvm~GA<#)nC~B_Gh8!-SO{9y#7psWC^f|$*{j>theK#Z7Z@)n#bZUlH z1CBv|J6ro3v3MKGCw-7G{yxd4R%hd{K?;4FO@lBGIHA8`NlL611)7Dy5agI6$gUf7 zp-*f`Q#lyT5@;41nPyQ;#mz8|3?s2kdwOSMFnkw$k#av> z1}}$WPV@wmNuHpkzhmd!%cL!#k3@f!LhIX#uv9^oV4#^t{?G$3CZ)d~gA_D?xeI7))MzrR+XJDCxZ<>bC(tZx z!+Q`z_Tp$Ri*3ZvQ_KdoFvItl%8C@5E9p4YAYq0FxGOTQLm6$h%t3&5M($VFUjP!r zG0558Hdc$zDo2LrnKcQt2Xu^|WiTfQbwchKHFF#5lYcWOg!!2Zdk*wf9%Y(^0eU~^ zlPWfGDq(=OW$p+AbQzl4;Lf2z_Hv>b-Bo9cR~a)LA2B*wQuGn=m=TC$cZyiA#xef$jm2AX-J zSok~>Wki)!oggbZyhUjU9?g_0186P~=?%=Dn1}NXQm72H1=UQDk~Xu_8=O7S0lgW` zeB(?^!b&REkc5RNvp&fD&um@kX!|XPt3G-TB`Jqkb&T()-8)Zt>tvX1s1)IPh zB<1taKkyrD!JhRS`33ubpMmU<<;-m@7&(*8W?@t}K>-+O8QNNkl|kb*nUnJrD!dlS z4-M*+Cx!dB;=w#JA)HGQmrzo6SF$spSHcaeR8WJJN!2mcx(`b0H<+&ageN@JL`Q29 zuo@To0u?wksMx9u@=0M8!?ZGJOk|ME1S^9^X|FIQo|uL&AeB}Hi0V5N zV=7JeoxFe0sWhn%?1d~X&qG{zuN0mKqoAlod&oo|GdW`SDhpzQWA=z6G5kV3)ge~9 zAT3v=h+&dN z-_cD~47(1s<1bLU;I&2joy{)?e70I&w$nsaPaODt7q}wVVbI?!h1+vNF-eG=hEe?z z3oSz&QM>iT*00%P0>kWx& zokzx>NJM~}1pqeBV6@ddnj0p7qFHo%QN0W)wR5=8Q??r9;C}5WTdJls+z>AV^N9`d zDq^*@rVP})roo)LNP7rA5Kj|)eHMvDe~)4KG5Re?FBb(QL|1DMd1QT8OA1-3clE4y zV*i|&gwd9*XwI0H42ughu>$bA3*Ko`R@9=d`3zKzGf^ct(Msf%K_1PXngjxxrwizA zlYqWTQ)_LPNeoVc5M7NX_Sz?=WEcj${brN)Xpk!32k*mZ#o;zz5tbjM(2IyDib>TS z26}@>(r0w_29ErU@$g|pF9UDDwB7?rS(G%){2B}*v85r31X{E)Q=#6dp<&BRrJjU1 zWzcZ#TvHONWU~8HD|LkyRR)dayxQTzNtK$?qPlsOCROeN_t36WM3$ANEGHoV2`6g{ zIgP1*{QPGI_m9KpQ~wy%s((!9#Mh%evYVP=;6*c!;DNm#*drlq=KT~c4L0WGI622N z^JvZh^fI2HtIIc_MMjxO6Qf9!N0$VdX!eBIsc-!Zb{;xJ3}8w{Sxim zg!UMx5>KTaLClIoeT#_61~tLV2B9BAWRv=&#b=M*xF*t#&SriqH@ihpr*+MQTVD zxo-rI$0NcOnMV_P3^vj{?1Tm@DriRUj#x@yv)_SNXLLl1JL-Ts5YzfNW}K@aN0`r# zwv?QKF&v37B>7dWJvgJzG=;aQ$WJ2!R)2P7s7-EEmV}}V1;`WFgCHwhjzBuOQI(Yk zvGP#{as8k?Gpqsrl!Q(28E5Q+)TvBA`9!dv;AGc8i+aw$C3qN((u|rYVOR1-BTtFzhUNz_*tp(Um+el)vy7X zwhv1oI*OvcF9V~_5kBmPoa0h+KF1gb8}<|Q*7l=D{VI+D0o4crfo(4cR9a`BTY)*L5Oas-Q2Z0N92PpqM>W$hf7`wuK)c+|bm)9(rRRxQ2a}CFM&;CAM11BcGtEVw_&S3z#N-3gjpS%1 zT)Gh#f71+44lGn&e4ZHwRSOvxrXQ9F0N3v38GDjm@+j&ls5dyo0*o;~O`L}<#11~* z(LyHyv2EWs`VEW421)8Hh5tqp9K9=DF4;4uiyS zu$Hq&dXzW!2amOp=FwSXgME+IQXu28Ss>99otR%BszKtnt29F(4|ii0lWNxKr^RN_ zPb5#+jH3~~WX#7NeTjHiQYSt7FK#aM-r!Lb7ty01d5B*6&F5x&)K38{v14yS8#yCL z&lpGPD+hJlg(UfF0 zP8TGblg1gW^(Xj^g`n>dCHVac1COZ7I)dNiF-q_|$;%6zJVFsK7YsCbxt!7xQ92z7 z{>|}%cXMtvG+Do(m`zN%SDd9hn)3pCh3>#%iOuO_u0K|Tg z0vVe*Xgkst_2p^|zfnh;NQbl67&@T>u&+r=Lx!qk{sZ4qeqnhNzFm5lcuL{TdYHO3 zh3it_@29|D;;`6Vk_Up6uhbV{PO;%d=K;v|hKYgG*IQY~%|Y(BEj!?VJKWeqcfoNy z$jyVs68lw*^`6-~^sz{eq?Hs)p?Sb4N1eGv+i@DGWQ(tswwb^v^hDB}CB^Q*{ zfBQSe8n!Q8Q8!#i+h)6HL3Y9x-OB8V9YU^=8FJb>vIE^wYs?+>G#0`ZVEa-T-iYbV zK3N%#Y1;56Ja>?txx=L}PFCcsV3}MToO;+>rSJbUwzI6q9y_f)bHO(;aGZSFz7FU@ z4qsOJtTQaWJUJ3n(f8d-ld%Pjv^DmiCDs$kIc3Pzu!Ce=wTIMRydT1g;UrIev(}{M z>j8T4Hvvr;}9^1fKdef0k(!7j5A-rD1!a~ z+eZ(E*#wLt=npX7V#Bas`g0v9LWkwzRpe_FFpAJ&~4+V@ObQoFZ0`|0kvAGT) z%Cje64+t1V==ru%5~gLmfKdefA>R&qFw7-j6hVKHAk7K`6Z+4A%!FeQjADdm_bh5D zI)oc3iussh2el*R5-^;8fg3ru0QHWKLQkYbV{VuJb_FxL=TzKDZ;onEDM z3P*`S5JBM)6Z#gx$pT8d$KV+$oyx(6QXj+?v*c2^hBF&G;Y54sC?d9@bc}e6rSuI! z6~FW*D?ys_p}YTQ7v-Z}H9$AS+fYg~BZ8B90et>ez+Fm^*n?+;e2#d|r>PTCQNKfx zduO8V4Z$4<(H~x6|A|-h;7l-}rBOH-Kc-bYgw?O%!oa3s+5^FLVD$~<9pY?!zX$P; zt|CC^Z79v9cs%pOGdPKi82mK^$Ks8u-w>RrzX@FC_DSqtmZ4d10Z!guyG`}kSPTB2 z(PLn2wVyvhZx<||iS}k9;uS*Q==%MTv$G9joPT&E-~p{X%`GCK^IgQI2_0@Nr&?ij zl5w830Q-!2iTfx`W!qo|j79w);QkZVd2+w690|}iI7S$M$6ICWkJJlPzVJV2DiQ@M zabG`gcrW(*l1UWr%!YO_o<_8s>kV)Bot-TAQA{yW?l&kE8$wC+tAcye%0Rd>D6i+Y z5QlM>fQf z2|$eJiTTd(h_eGY=u|!@&&(eXCaR)us=3}%nmn>n~ z-$Q#CS(D{)va3ZhDKrHzxRq(kD%f6yNg-9A$B^N~08EN>Zc=eP9`GFRQ7(bjgOkh~ z$+>-X6r=B)p#zyM3l^b=V0Q*jtEBK4>K1(FY7-{e{pFH%zOyjajzu@bMA-TZO@wJt zNqzr%7$<}5ub0ydw!ajp?CY@b)=ChD<4-K>Mm0 ze`9oVLj}drA6};>U&kb0$Lp`>zxUg3=s)|FL3VXF`S8G_4zvoAW{4OGgu2!m|I@qz`mAXEgHzfp8rjY8c2gE2|5b$=L9u zW~9^5fj6y^qmQVa5EEb6`Zy8fxveLX4x=(+FKP5ydo~`d$0@#|81~!$;l#>R&&K#( zvwnhK2JX)%YT*I*_bm&p^<7dHiZKIyUS~NrJv|YlSUCiHD5#|s#ezpV&Ab}=`MkYo zKkM9jBu5&cN%LQeMC%iY&PSrF`V<%K>D$8xlu&_5KU& zAsS=6w1tXX6^X>FkodTsIEf#T|N1(^lF;V}-)Rmf`tx{L-frb{wD?Lohpud-sZpP| z@ETmcl>|--J&a#DdhzoFj}CYo54sHiTk{$L#|d^hVy#10EuVEJj9i$#l4}DQ$sUNq zaJrsK21-PJK@I4@9;jSAi?RNIN1?Q0cowy*OIqQuf(Q?=yU4C}MQm7Rp(_Jkd=rv| z3kxcUoN03*SL1aZ&`Mtgk93~d0oB|Lxlz`Fb#w&Dq|d-GYO{7oat)G*1PS={G=R*4 zoU@8j)-Od@$C|*VgYsLLYmke{m0t{#g+^FX(bf{X?;1HWpIHE*x`l|Afjf8%v&%@3 zXvJZJ{9+dv;1G+&gd5vM6 z2e)p)le`S+FgV>BEraL63U~YtG|mGVg>kzvo&@U)<&tJ!aij~Y+WqRs)E%Lwf0QHK zQVIDut4^lGya3&da)=oJ8uWKAFtUKcpy_H%n010yK!HO0Cx}5Hr)L}`IKV%2zR76`u>Bs{^BP&QkI9?FSh>#YB7iB z+b^KI`1Xs_iiq!;+7ZuW_Mz}P6ECJMP0B0QL{zmf0~Y`a7>eb0CWzi6qwQtb8%Vu% zA4CofErDS)@8Y`_am|)H@<{&E%-hUsK@50sCp}sv((*q*{h)tZ-FFgMOfuxAvr=D` z!EcWvK-qF+Sf1MPHS$sWZg)qXE)Qcm4exk|h?-!2FWynf%#ti@e_Um(5jD~k75d8^_Z5VbbRA93D> zMURf23?M%ZD6o)Lxw>TAFBrSD*;>aRcY?h zJVdDH8$^`miL(@tx@m;2p|k*Sv;f>Owd%VsBZ{qPcEP~@0DejU{Pc(~MEF7xrboOA z;a(z4k9ax4y+xQF+CNY&L{Vjdf*#t9h)T)}fIS6}9@+qr{vr`Y53N^f`iljS9$L0Y zUnHXFp&f<3YlZ((0i=gU=O<8P9}z_lZCz@5L=v&|(B1(Mn~CF;M%Y)Fp{c!Tq}9Ge zq%of$k0CYpDs>2L8sO%pSu#yXFeSp&K-bU8QKwjb+kzGsGe1_Bq>$7V$cwB}+4u34 zdis?8y%_2OcIZ0R0biEkq8d_)bhJi}JVqA|!6v=|JwUiD$?BwmK97z9UixlJi(3hE zBFc0(GPxsB!Uip$Pu-A((i83PmZKxmkjITPf^OwWO5#!uTpc~DxFG`*83d+V@o!Uy z0Vhsl+M#O*@70m9k$j60oWk+5eXir z1Oto&+CL%5u$5EVTgIS=*}klN0T19%%@U>t3a~QkeDz9xCmO zyS1L>A!~B}6*_X^?lCWeVNK>j7=dC<<|Z&esvebpg|nsu>g-%bzuv%6i(RT50T`OE zGiZZToLnm}yruU|?Do3>{KmEnSE3|zL)^iz${E=4XG?c1;w&UK5o(<5#`3o2DN&{H z3PghYQt18!#lOL^;lbP)U6bo2CYv79!kyJ;!*sY9l;i z*|%Jc=?O$>F7~UaUEZQr(O!nqku&DcGT3DBM^hgvFxG^IfFiD$a|N?w0C5BBUluR* zd)hM&wlo8GnbIUxH#&nm&LZvv-b`|*ABqv&0Z$r+M6CsGT9T^=;qH={^eFWNxnGb) z>Ctz%I(rPVP_aW7;%XCOlQlsK(74l9K|u9+eMdmt(a~aYs~$=7<{%8KpqQJ(tyuFxe?QPKdL_}m>J6QCSP@caD_Y(Q&&CxNDYPB+_C&C*>Q;U! zD{6@k!Q{C^zPC&nO4DdhetKXhtqW5GBx^93<3v$bY>@5Xrfmhd!{bkbuCO(Ux@#J|U7Hi@{_PIAhMPsTCI(ZT}p| z;!A9Bfs7quP}v<3w6K4La|I1)S`)?{L&&0;um8dlb^*4|sEc1mRy1B)AcLe`Neg9F z=y}?!@L?p%ZzbtAqR1raHs3u4ZWiEkXg(9oX*dS-BY|G~f!ra{oYgS;F;Z>7!&!5C zCm1NdmtpNLpP&h)QY$h)jLd8tb^-#j4Yh?PdW0JI5Y0x;hhmw!K2^H_F|;cKih-)_ zT*j5(Ybt;V%ob%_Km;y+O|Sp?qW+W?>^NgT+Tdv}(nX~hI`1y7Lr(lpWSxPmU>Tj` zqQ(nfN3Hm5vmU!|r-JhTd@n>mqFBNYs=>PlXe#+o1H-_;V2II#a_=ytAwL9(Z zwi`J?8+Q+p0P&!yc4w{uu_Yh`0wm9Xv?WOG&H^LcZfKA15H2*r?T7Z*h;T8&LlwWx z31T~NVc9r%uM^gh4tgaBlaqwWI$@HWN|*t$Cm;r42BZ@~K$sEk>=A?+;Vwj#r^iNg zz^;gMD}K9H4pG#{5A~DZ&>Ra*_89ILJP*=Dl7Y2<)_dA)7*fW3N3<8W_M<9`V{tQ@ zto{{lvQbExY|{lI0d160UqS-yG6F*ga!{&RPyP?KU+Nh||MMuj5^MT4pUoJKNicmp z4Qxw!X&}+cbdfszE9yXd?g{lC3j7_t650^cq@!(ScO-4tR@a8JJqE_t%Y8NRcPYyq z=c2PbO&&%ljbe2!VfY4gVbDqF2LQxKq~3|t(7PIKFioZ~h~KHY1w8%&%{Q;R*2%(J zv|aEIOToRJQEL~cQs=DQ)7_QUxT(oAq4DZy-!IUuEW;vQad%w0uVC6~N?pko|L4wz zG?H+dyD`64AK{o%=er2E85T8x_@aGfk%UkhaH5)#*^Sv1_6(N5-&dhq`z+(T`YY=-9MwasB7v_}0;4{3Rmd8Yr;Ydz`|~M0kHXGmco2n)lHt=R+#?zO3BD4o zQ!>1S!fDBHl*0R8O5i7#pjLY{oz@Siyz3~uI2q2O@QcatMk?>IWSHp-B*WJc{N7}k z_@@Q9ylBo5*vC-j>44l@U7!({_7S{I60WcRu$hayNU>R~ zUYb`4$vQN+lg)=4E4IpM`=)2tWFQJQB`xN|ol!sYSGiv$Ssychqy?*tr^q03D_cFv zTJ=5*d2l9e680;mKLu=b@+I_0-15{Sq?JondoZ*Y_+Qblr{~P;TAo_SzS%yYOS!8Wy#VaJupfp`ZHFwZ<_7_+?EI-Njgo z?TncB(yR!_;7A_G?Oy0#Ci3_{HSUQKNfPbP?fEJWB2s&5Qy^+^PbKFI+`g&wk2^K} zk6_dRM=uxj4>ZxAo}~XW+zk2ulKka5`5Ri359O!Zt4#k-Kc9+zlYdi|l?_t$)#-5a z;SQZLWrMl`o8mo@Yi-Kvp>!Yu⩔!VBW-Y1sE~M`3bECC{6!5d|ZCojje)}FCtvD zS!r?}{zHjz%%hazaGBCIAGhos4Yx=kteepUD4pCS6IQzvObsH-jG{ z`Io!N1Vl+%H%evVZ>#kV2PlX5WA7n8-qH}21!ipWv(JD%gQ_JL5e)q7l9IRVI$XEx z(KL&XHsIysj3`u(u^huY7E$#)wMz8;-t-BYVp`=s*Bkt2dIx_#9sc%pgb4Ii`=eq4 zuHZvfaYYtiIEt4ePhXhk8S2;FAb!+S;6$Ot2Ex%vs`TSks=k&4!@3J8jP2)`hW7== zu_#g5hI9RBXt%PrtY~-qLbBH|t%lKCZ*$_pFjv2cLSvRT;RgRsWld5LLphFrg1WD0 zmcQbMbW40gD~!Geb!@$Ldy7^oB14)8FX2=pFT#_-h;@{oLR&M+&k5yZLb)!<0Is`w z2(iQt4q+8Bm#(|DcMagy0I2a%t6+-Y+*RGoJ?b~;fUI^*6`rL#K%{(E+CModt$v* z=chHvPpMbwp9VV{(S5nDTdD5DccJbZTcMOfAsZFOhAb9{t2&Ehy zVg*yA(2uC5>P4)!9dDH620aP!45_401@fw;l;i;epK9%jEqF8#^1<6Ae@x@`m{V)3 zY-p=7hPJ9t>Zo@D&{02-j*>}7xlYtkzu*)SH2owQE<0Hc@5OE--%YriANNZ&*?oTe zc9O#LL6-{&TxB@)9C{Xg2b+b@7WQxOL5pQpiHuH$rQm*J^IcMKhSB3;Kx^v#--FFt z4gIO>H*E;(YzON;Sbq?YWC@<~g!l`6l2tm<0wf^SV)(uL-Bk(QLZUeOjinStt3?G^bRW8Mn!+grE0XlR=i25yWS*iFg)yGch5F;`#0!km*`z_ zIRzdxvZ#;RjZXJpkyNAgn!f*_ht`ypcI`ajpB{+Z_-~jAEZ00zIcgm*r21%@8)B_T>b7jgA zUw*M$>6xXzUM-G6Fm_*4~LVV#yAc?#BBHg8eobLc98PuuhhAc zmJQ#B3<8`GC1t<6c1MQ#HcBN5v1$rWP|p}3(GIH_6aYvYPh5^>r=gbdr+B{{SqoPF1vv$elJ-@h*ba*O|8)E6HeGSyAQ%ns zQsve7MVEmV!yOv5)_|0K)wwwIV^~zRln&|++l-N_qg1&ArC^Z;X4QagNM@K-srt)} zszUZL>cY|rgMHh4C0Owg`a>MJ%D{0eP%KrxP8|%Eh!bb`aOR-i=2CX_RQnCExAVRO)%wjVdQ^mf}B6{yHRv+tt_GPtA!?58$BUw^sFi2CU;3@Rx4M+k3 zX@ie#;!P%FT`R*IQ3M73Yk7%fRwHTW=%_TP=rsv>;q6|Hz74o*{@$)0!+sL+J{wPRo_USLmzL7+vQ2n>df7=Y6CS=Wy&syyqu@e7lBNDOWC zjp41ntHi+OT#n*!y$0D7DsrL&drJ06m2co3gB;dkF%eVBk|W(Tob1w#ii2$p>Aa0d zGt3oXt$cSP{#hpc?o;EBKYxPh^O!&;$mDyubn_%Vi6%XTOl=e@mNKCCqU6GkC`hy? z*%M?-P<5T815sU?)4)vp7x>JL%J#&0UkG~w#uM{^uWdVssykuNz=naj0|N;5eJ$7) zOH)StiFJdXbtPy_se&$L6=u)(WcF0sh^a?`8BB$@dINHJjZFP#Nkb@k+yf|0i`M?k~dr?%Rg@iyPm1o=g}SKM-1d zIrz=?N$R;s;bC?AcRepI+QKJum0zGUdc?m^_!DR^0NH=IM5`a>9Bxq1q?>;`iPLSj zKvKTq0^)D*LtUL^u$I(iEBoWr{4{xcPQ}j?=TFoGW}Wx;o>R}CGI;)kO*S-tB4*L# z{54>J#_O(+H`pwz&!5sy)OI|7YPT8H{U7tE)tQE%|Bw08#Xv?4X_`M-)LF=F=(-U} zUAG(kS)V&Cf#WG*3QJ*NVuIq1B9|w>}m?`8jtbA8!kaSjb=>6RD;oK`bKJBxF zrfW;ZvtUqnOTn&dI-#8Cw6_U6oe+awIVtw|!W2YLn#t^qoMb96k!_P`5^fxqAaav- zoi3}%3QHmKP@1u2o3VX@w$_O{5t~iN#&suYpbuc|eKU3Gh2j=y2jb~|-#_xNYfb`3~H zeee|oc>b?V)??;#j77u8S~$f7JDqW9Lm^s%ziCVbSX zQ`w)X{^1ukKsBZKhiB{9PV^6RcTg{iKsw1kY@lrIANCN+6a2%cfeR3agn#&STH>>J zt)**aarMclFhrUi#G3kv#n2{nGeN7``p7|SWe2gdq3lo8oWJlvrU_Fd1s%|SLe)&b zTWcpL=64ly2JP5G~|8R+(B;g;X>+#j|C`rQKtnS98GAH#9o6qmy zlo{=b$JX?%Py|>vYy$%e$DT+n(7JkmHM*Tg*#5yLEX@7~9YEHPZbkam;aFy{=`!Cv zWUhIFO_$E>g3TD8t|#4LeMnBLYuQEPLp0~UIz&aYA6iB0p&Iu2sjr=#fzhCxI+Wq2 zGS4NEr%dD-x0dou>Wn?vz7^o!*Lg~<}=k#u)PWs zobYt+vy$#FaMmoK+APFsf1-V_6=0dc zPZ2l(u$h%Tc=(5?g`Yx)XCIIme`kTE1P(L)gUh*iwSkJSAaDzl{3NmOT*e$Zu$nkBfwD_x z>~#WM&ESay-j{nahP4CI6o%2=5Gf3Uc>uFpXV`1s7-Vfg$|S>fq7bzcW0VM63zWVb3(>``!CmcH*4Z+34AudW`-TZ zwb_DUmw_^EIewDZ7m4h(oZU&;zr$XG1op=SxPrk03A_T}6D4dLHghBxwwJr>YDA?l z40EI;!)9zZ$a)qjlMGwbCBZQG@af}vU|1U|G#?D}(jL^1f;Z?thgyFKhB3`RSAw%R zctvz2ocK?&q>>YVE2vM*TrqwnYybWy%)I)QBrf#fR&@vV79?svUx4Q_xQM{D0GoN+ z1G}XJZ@W$iZ9#N2;J3Ir1vL3ct>Zs1>v0qimXE?{sTfo}yEU(!Ku5qA%E5-E1o z6M=0h#orACrvt%(kD30T8QhM*c>v3SIhbVX*HB8813;OX=I0U}=sZBckHmNa{@JuQ z5t$^QN|bObmv9hGqb|=eap+zF_A>Z)0>1!o3IYGccwr{sfkan%36OYsvb1vrx`VI< zoHgGPy5Z*1G6cAZ!QT=POsou9(J~tOQbcZ1m^?+#4>*`N5s6$}v#26P7#wq3kdkFAp41S-$ z*PK}3QjG#fQi1e6%w!EetKk|hgsI`I`8Q!ahK2S-4HpUUD-3>?z~2F!Qp4s$ zt!wxeuH+U{zY`Gczq-B>H5?}}Ucwl|gz*t`fqxg^z6`D)@IOv0@ZppKKTeoIQ>nlq ztqR;*%{5#O%feZ64`DphDDZXkk&Oae&)}&9{u68U@n~|rnV5ysd1rOR1+25rv{Xsq zkK030Nh=0f<&weB)feI1qq&8*^CAa{)J{OS`>^%6O?`|`-;-^|rkE6_`+_yTG+31J z47OrZ8B+K~Y-%|DuWuHRadqiFb7=)G%U=gIOWUr=^i9~^=fNDo2HFB})dm9&PL(|MGt4fr4)zDi zH{(xdTYKaZZkpK`)SWfQ$fz&JE(F1V25Ki2~kehXQchaT>2*N#V-!U}NKyhQk8SmhV(w+~3n^nVFGtJ8mP5`V#8;=fejAH?{-B>dwO z_&-g-KO>31Qxd=ZB=`k=Ymms?lrs|3gWka8!Ohs*oY?#0QgHU~A+XDd1zMbB#2XHz zU{cv$_*cuXwD{WdHXAGt)y~|9S7%ABR9Q*Q^pG3LArsm$va8r1niS8GA8`A4F^W5D z-sASiD!-ubp_KY9z-M30^d8z`h~5K$paeb}iaF{w^`iHL?9HbSqR>yW#2xQ*iN9l{ zbk?k;5<4bJ{2Y!~bBpBzuij!Su&G;@h%D-N35ly7jEk0`+{Br`m8h{G!|Mz*wOD5K z{FrxaeGM8SgJ~DCo-j-a;eD4m8IFv6g$k5OOJYR+WSn59uJbw6C{)MC$ZW3ovW*1x z1apZhhb3Md{24kUG^qz-+io{pqS9bHmBhLE5@helt^BWiVeq%bv;JOQ+z z%(zNSyaC;6Ey*e99a$Hrq z>745XqRx=!kXQ}V>vfBp)&pr2NRNa06-MOpzgUTpiW;iijMyQJlV?PVeGhBiLA zh_?89R5+%=xaAu`-$JUXLw%xJ)YK7wv=w5bh7$?SHRNoX7d64<0Xi1#dIZfCF8h?* z83)rqk(LUTA9Q8)Il|e9^Pf>y~D7Z#w5K z(dZR0$~5{h369Y+Uw@R24~8a-h2xx>`NLMMF%mzA#LOQ$ks`>9ZzR5$!po^IKdHFX2CABi2(Ge)MSrCVlmVY*tPyHlWp4ci1Niszhr-;*`wZsRfveJ)R zo~UDHPN&cI(S7DFWf$*DGZX#uIwD#d1S}_E*c%@b_ivoc?KBy^m2NCCXKzAlB72(@ zBJNEk!ZEF-MTi85paV61fk=B3)|pv0ZUiyZaaTd;aFzQ+*pK9spNKYEpQO%#&yXR3 z=!|VZp+>u&&3JBO8I!`~GX@@PZDl-TfhU;6BO5JU|AA;05?ySz=d0hJK-QBsO9c{h zvp_11#MIHKgPWp8Q51y56y-b>%F75P=_6C(u1IXI(r3(3Df}kXI;upbHL(Wzh%buq z($#{Y=g`;Kf2a+|T0G3tZEx`~*bU>av*t!J`rBaZfmQ$$5YSHq^a#dEXH6f1YS=uW zy(6H{3Fvl)b|vU~f_@{Qa|Co5L;phq>^lTK07D;`ZxzrN7`mIFj}o-2fR+kqfT3Rz z^j?CVhFKf(o-d#i7`mUJ*Alb@_B)_$1hkBy_Y(ASf}SDrYHxCVFJ$OCf_5WlN6dJU zcfEkNW#}@39?1msJAwHf0gW#vZY(0`c7l!(6;4GeV=H={8-fMUnKxFZ@t=#qdVlk{s7(;7zqDD z9y7MLzc8@f28i|m%sFF@g6Rsjy!Hb*AZ{YeO7)Tz>6locK<#?b2+QAKR$a-==t33x z#R`%S5SD1pLIFLCp``@fNKjco9}>{xT-_T8x`?2wVMtMV0=k2t7Zdbxf_jjb#!~8l zVmy^Z7j`Yu$5R?uWbHr1Qhlx^>e0N2>+$R-sK*`4X%Tp^Eh=N15`Dj{)+aN+_>MXs zIHj({2^z5LF1#^p^?OhjlTm+wX+9_{mk%lSV#KQVBPZ|vSnYd@z29tl zVHeelbSP)AZM8KEg#(jVU$}{qD?W_c%0A5kd}vJFX8id@)OtV+)AIsQ{f=DL6$Rt$f>w;NRZ?!J9aX`*=g_998KC_bDh9z$1XC0OAsCk~&D zhH*znS#dgHhY;09Df9}!wEgv0BK%B{DQvD6ck8lROd13G+-0!9Rf3j*C8!%l{;S+{ zdsWk%nLSJAT6?>Lt8qKhsSIKk_!-YFZUA zVX<)T9+zI?}weq0t-->^Rz zKx|aSHk7jCPR076j9a{QF)E5-H=$!j7g{QIDqTawjrcEuwr+Ix=g}WiYCYpTCaO1x z8qk83O{wxyG`Y7_u}((41xe!6gZkz7KroCDQ2o#c=!-DuPqdVPg6n2H3!~MVhD&j* zE>Upn>M!MzE+F1Ut1Msu?r{;Dp;n-ojUolBH&7WLQ5lV`kVq9%b&2$!Lx^;m>67-Y z5o{s^K0>fH1;Hf-f_!cWBE+EMZzeRN>NqaGU(F^on_JaYs(72yVk%><@XvzN?|cVo z<2^^0;ePRy;_pE|X2kh|5h$J+frnJN1hz;kky}UQzw;)_-(->osiLQj1$Qn&BE}+t zArZJa>35b0(P~EHNEOY%%?&hEv99Fy(ORMW67Zyuoi0#XQdJg~DLLP8pT&kP`+YKW8 zcB1Rz+erJ>+kq~=tyQIIpINffUG+Lp6%sv5@KN+Esp2DKphJ#{-le9{^Qex|e;zJ^ z(mOitDx(7nTQLFGTbGVIrNuubs$O^OzLiVxA?4oQOKHjgMN7=tly^jv(^6t%(mGup-d=EMc4iX)bm3wg$ zU0WVtoR`Xx5e1mh`>uqu#CN&e?@}p*+i5IVOZP+v;uP0fceKNrIA)Fdd2x3zW^?zO z+9ZXr-i^D(*7*0*tu5FxS6YY-cBPl%LxKR%O)qfQT&?)(np)=PqA+hTI39pBIWiq) z))4&jt;SdZJ)l-ELI>pemlO&j5$U1fa`cm@nMjpyU_7EOhG&H#Wzn(u$1&11gT||K zeZ#?;^*CkZ_C!amEA%Mq;$4#dRJvBiQ?i-98k_EQmN-@aUfOq2m+MsqssQ+ZcH&}n zWJ=)kFT!p9D_ZDg@NMdbXHh1ee>{(wK7HBTxB_yUy6fK+=qf_lpKuW={VPLPt=$1 zaq_3rhDCc{5XbK0)u`mJ*yaER#1@?i50cEn*s z&!V=ELG^q7AJ*OkJgVw^{Ldrq3fXu9<-wnIH-RDk=(1saq*d z02N4JX29z>5XH5w)oQWUR;^_b7ZR4RxUeV!Zh)xw5>apotK|QA&$+W?(f0R!{yYzv zd+*ub?Y!qb?|Dzkk*CWV;stao!x>~~*??j$hTKiNWdknq-Fj--fKK%Ffan6Vas;OX zj^W)^>Bsr7gAX{`XT(I&Pyt}S705mEq3*qnR3yX#G;)F~q{xAY@$Aw1#gx9V_y$Ou zE$(+^FJWQvc-~068k19faet~*dkhOBa&;m}w3$N^PuV1iU20+R#KMTo`K)rqM3dZg z$h+YM*>i36tXcqdtw1MsZof)0gdi~G@3NM2G0GEXeDeIOck^}9XXi?_OzFCjvILND z`coY9?mO7m&mzTKO!%@Sxr=!%-?{Bd;j^XT=fFhqS(aVgyExG$i#V};Sbn-Y;OI1T zrft>GxefBu$qUy{I++u6U$J0dWarZ@m^+_N zWJwt31J14m=#@RFPdIFpcRj@W?@2r5wRDM(skML?jy8ZHsCT^E##Zr zPcN5TmkkI)2y)Y&y((ZIEUR`}ZQKFLw;dko=Ze#sht1<5s(5j~`E1I3MX~vQD8PuV z;?bG+IIDqS7QEGPh-#{Bg)e*9@c6K>J#18b*id`eXoiPNTnkig9 z%^M?br}0tzFW!vcD(CN4aP0RqI?LF8k;>ibLn)i+dK}p#ba=jV{YzqlIGS7oiP^Bl z$)4XRpz9WAFS=RLj#I$VOWoKougk#@@>qbI>vSOBQm_atLUA% z=u39?oa=FDa8D(*EV4uxCEJcmJP*`o);u8PIr(P93Iv^+_v8i@fixaCWPzrJ|1AUF zt^TA(elaZM1V;hnl~nG0hz2!du)6rzLt(WWWB@71=bb@0@N||g-d>8gmg2KB`bGp1 zASH|Wp%*7QFhgOSSMpFqv)Vxvi)z`7-*)mLFC({ek7ev>zKE>j=2JPVEXJm?8U2n? z8Ky{vnW{>~x2D>+qZc6=Qle{DdV%PfCxCHA$tv-3GULDCjUQo#hq(AN#J*=Rz!Uft z_p=g_Z9IBX_aM0GhDMi2wXsDQnn zF&AYK8`x=kzhEZRYZRFS_8lFa`5UuUaNyVgq>8(guBYc$aVG2&h%09HT57vY36+>3 zx$jj29X!qyAx8LW+Ts_8j>t7Pexb)Nm&6t)I!w}2n!^6C)kxL}pI!-DB2FRCw;s#M z3j5`RGKdv>m9Z_i6K_%P_x^U`&+UuDdc>ki8X91D1sD>5A@yT(9L?iqi8A(``<6p5cyGP zP6V);x-?d0-iz%dK}Uvtl^e^jk8E)w^QiVMz6*r=dBfUSX~g7!gt~h#fP7$^DJEAq z2K&~ho3oT9*W@1hm>d{a2nN0c#yvV}gU)kEwqy?YFEjpuKgE`Gh}9{bU@SC+p&=q4+K=u_+v{!L%eBT~BBEriJ@HvT>b?#WzYHN1~jley1b&(}9>4VyK zVjxP+6s=}IqnJLQDbl$Sd8M>QrA2OWo*yhx^o=_Yh|wsi2K>TVzK(2Qb}02B6n>j4 zSLqHOheN4h%sLtIfbt0)*@JJ7&yzNpm?xcQaX*DT@5;`&kt#8KU2a`l#1s+u*M-@M zoWeuDNnh(MQa$h@0;MpwmejuTyyQTlGf5}b*U9@DKII;$)IBq)8=+v(+Q^-hmF`ec zZRGCcOKqgedvqodG#H-YUaNj|-H2X{d{=X-g!Ji6F6V4nAE_Kt$cVNfhtec$P*7WaSG8R!;7&ii(t2B%g@0zpvgh{Urd^G6SLnQs*uj!M(bVQ+BCJ`&*MVP8T|ZNuuEryEfdaG`73^ z6#huuPuHnNB`%eKV^gJOIQvCDfD2dF`F)p$3cn~Z27O;*hgW2k6ntN5pG|<|dRcvA zsOd9#8!^0I6)_@xcwR`veqKn}d3CP9D!xsguc1bsg=n11cn;am%lDAIL_Vd7$UOjs zSAJ1s#Fo*vv2cmpR^~3`IYlTBfwm<57_qa+uamMNS6(~}3Ognd#jTE9*dwru=E!H+ zQ93BvgkVs#lr#g?3roH#)BQ)ZBN<|!s+y8Y@xPx|9QFo`<`lp)*oGHlg;Nx?ahq6I z?c&>AIp~T4kAm?l66w;oHj{2gcZ%FGF^5Zj03F$GaNCiHf>OU6scZp3(r-Y6?8xK% zA{~MX|U?yBFQ}whe(>WGOj_g#9R1e-v z=pH1fRywb4%uJVdbn~}K>E*D7CgWG-*tBrV46pPhlmU6Oe0Tas8W{~X^ z4^dd&NS1VlTXcqnlHr#+!^?X!NJTjFw#kS1Sr{P1J0nR)0|20Vsb~~n zG2A~8FYXW&YWpRHJQ6-emDjQchv|49r`tSPN`#OVHLRy6zT|$NCfM_B+lQEQpk{&Rzt^bj7gJ{YkpQ2GmN97*RE! zN)rDR%Y@vQJk)vqZjn+$B)B)w?7N}N7+LQ;utxZNIC_<_a3yBF$k&9wt#`g*$sq?p zN8#H%DaT?N&rL_?FB4DakX9u-%gQ2$17GO4htT$@k}7ga^zA;ZKTGs=KaQWOuwh$> zD>;8krXDQ%KMXIYRjX8I!U(g`URN6TS7Y3m(k(0el-$_G%G6BjZ%lHshjt)PxIcU< zN7(IkCHjIWBl6ef70&CH7KXLHTNJX2rS1!q*R2V1g-P+bFVw3+)g7sLO)V zBV0%2U?D(O1?_J_{qJDM<8U2s7*mB4ZTmMX!It}l=Jz_~rl5q!mlDy~Cy)=PB^40*Cb zaLQIeu{;>Ph1%qns#Ih^u3A9tu*7;!uU41Di!#RhxaQm0!sW`g@Yqv&@tNaphAmjH z07;0`h^`if8PNLP@(WU0j1{>f>Ax8L5AXr7xm3g$j^RhNSjI@buCtK+Q&&!nai5d! zxhDNj**|yxDBn}@>gZz&)HvyxBsIn+k{xK>ceg-3Z^^?lJO8dD^IgrCD3`LspGMDI zRBQ6iXOvt4db)a{+X?@q9DSqQdrb&b=4<8r~~Z_ZRRpINO!Y2S6Ce zB0e|)L3>+rCCMh|!h0xSe+wTY^&!LF+=^W%!Z(dyh5lvfO8}e5OU{k`wbzRRd;5cU z=MtM>^tD8O4cKpsHqimrCN@FGvceS;2NI5;u%|JrJw!(Q)P%pNByo1Fta%Ha@=w6} z%L@5|4>h*@nFpM8~8{Y6g5cf`FG`~~QhG-$=|>m?*?C5Ci#e$Uc9(#EH7 zQMU+dAu;PsebHv9a2u*?`3+t%SpUw)Ddu%fR$E?0f(fcj;=u$&_17RP}d zOYFyGK#Gsbi|1Dc?5SMSncxo2@^We2i$ed|GDvSSJxsH!^{8T3S7!UO2P$6eMuz#7 zA$vNf<1Xe|b$``dik{C~-})-|DD}1La&52bNfqXzo^8SQ%b$@eAgOY5yIe^*fpRiy z_IAU3*7U3H=bQ1>os3aU)keY8UK5yODFsP?5VBXm8n5(PM|zoY=00QQ9{qI0h^*%c zodS1``*JB?WCcju@Y^*Kkn;4UNZsMGt0a^4&~OjJ zoQdEMIm_qJ*TfLNvxEl;iNgd=q&3R-fs_$v4v)P>z>1)iAOW7+>GL9IWEwDfGZJgY zav7RT2ReSP5xbV=X>};&hD&*O8Xr>fkgr4eD7ETT$qqM-Q!`!O2mF|edeH^l%~CdF zRPS5|0fT(|*0|!F@lUCN4yR;;1`w6HNAu?0-!?_U0YhOg(vZNJvEL&8sJDbq@c=Md z+)g+yi~`_1m(XpD7DK~OL7{!H`!=FQ6|=aeSRr{!NNUf0eK7C9+U@)~;KYMhq-asP1BOglfZ?JbUC^iN5Iu9U(0f%=O z7=^IweP}$)pC_sL)0e{Mv~39bfgKe}>*C;(tbfp1zvRbUB=^bdE?h=djrtLEI4M8> ze;VHktPZO3md1xGSCjEAIM8%_uRN&6SFAeyO=^6P;h4~Le74ToMrGZd$~uv(|L5^t zIC+E$9hHf*m*S~0J=P3oLN<+YwnI!#X`FfXF7UDC0X4KJ-8L7kOW~siR|1WTiMW?|b}k&?E)l&i{Y+_tLw52ENP)P5L`i40J8Q_qO{L ze0!<>ewl*r^&htg-;s?XvW$wqqNdvrv->KVwCwv7cbC}jibS)5_B)9#=W;1GyAsck zp5;99nlgZ3dQzT%+MFdf<%vr_j@2ihB3humEJ%EukpvUzczh>57`?x$J3;)*%L`4r zhgn@iuwEo?Y$VY zES60Dn4x-$$PpnVQ<8H6b~_dTxJ@o!;$6d#3InXRL91v~Doc*QEu;tE8CR^357Hay z1-lA4Zay!_BQzB%RIqf$V5d|-bN@hMNnG9NfvR-JeS*NQeVMDAuLdYRBBDy8ul{#_ zhdft@OSzADoJ3UIty!k=`sfk+t9QV=nq@il91um?WsG|Cjlp z#s2*;>nHjLyEWKJki@ zI8;(1_e0jv(Rx#^Qmp35b`@@gf4D4qI~&ymv2u>#_>WjeI2ej{)lYb;NKGY1^i2w3 z!2We8e!`pZP(w-Kp~-`}Z5naJWz*Spc}Ncbkoa*UB;hP>*cfOZcU1W<7MGT&BPtll zDw!FuTCa58;1rI!Q8=lIRF%Y2mmj;VIpLO9nb(|iek<_a;v^`L8OLOqW$WSD-e^+< z;ywjnxbN8mO$Oy;G;y77Vx%;&p-@SNKQgG6=F1{u;cLA_Is!<`=H9XQ!c&ZeB@+dH z=L`J$SiaTH$DD*wkWm#A@p=pG+;DQ&55*Ne`mWaUFts;&g_0(dRU7*z6;m9kkS<|?qA#B}8x=_g~VTb?0LGUM+QF*`lU zkkUHm+l;G}JvaMpHv8l@hYraB;X%x99qZ*_S(!QoyMux}<%CbgooUb?# zqcEBoY>c3RR)1WOxbr>8u@DpizTNt{1LUgv2yaRQkn3!lbsnPUlC4_ zDB^M_t4MoiHlVRra&xse#a{Jw zs(J~|*K+j^+M~VFJp)RpO4dJVgsxlm%NfJ*)UE6t)Za_$f3I2nzx>Jid!v0*|J$sP zs;Dc!2|P}h`rf~@3uamNdR9*UN_BUm;0YR$NwtqmtTL&JRlN~pUjJHEJ&~$)|5~WO zi`2iNasA=R&FZH6S#?j*cK9j{rm0+%m5GIy^e|dWTPb{!{lq5Y@z=_tZ=KyGiC%$! zd718?8S(e>sl9slb&Nzm7^jj`1EN z+y2F-?{@)g7ViQIwilqZ(Nas_`k>K!7156QFit)g(HEG$*#5x*E7q4oB=gyNtB~K^ z@Gb1Tpq)mPLK!{oSaNq+DxQSn%*EXqG{-R*SIFj^)HY7Ojl*NA65^Hd@8^^bY^mr-?;KaG9xLSVP597WR@OuOttu^>e)lxGFv>Maf<}2?<8Tde&JOzOSky+ zld8p@ja%I5b#MD_-MuTk7W2brGsgI^G5B`Sm>L_?XTG^ud@54oa~}Rimpjob2j2e4 zlAIO%Ih4mGWIXp_H?ANjv%Ah_ub10cv@lfmEt4g0zy{j5q-?RJn||CY`E0UecCzG6 zOyz_@%II{PMkVFEs^H?LWJ!Or&9he+cjPG6|d}Tsj}F1V*|N5mTHKY5&M&V#Fig>Oh0za3UkX5 z2vA;HM)au0^^5myy8hu_{i9R$7eW4VzqYR8Aw_gsiQ|(2Qn5j$tLWraacruJN;-2k zRnWyOUzi}Zk!?JQtEx6P zu1cckH>=9msH&w1PpN8Jx+?hjd1#fdcMe1n#f#6MkDtb)08m(dmHd(=Aiue4KJ<8E zs1ZG-F)Ti>%!EY@i6>3vvAU2-G3VZb{89Wg+K8^~+6azcG%8!-m0i#5CuISN$T|4Q zq`ZQh5q+E*@SEEY5M-i6b3v4J<|hR?1q|o#Ufq$Xu1t8#BMOPPN$8EnJvmC(pe2`c zAxC3n6oZn5@giuihry0;Hz00Af0L|0*_@M;wz;@VqncKDGU7*;$&5*f{tw7eRlmH* zh@GbiRw#NFk4yubMOYirGo>-kyHCI$3$-{gwbv9YaZ|5x;%jBOJISLQn+LI)itO)g z#7^MBj7-aIqavO>85K=2Z^tZIh_Fka<;;1DyH3gAMJKG#8Mdhmf0GP1lfkT<=7lG` zR;Pca(&tNhsiem**URt{F#~LIR^QAl%Q*m+5>r@7ObEtH>H2qV>AI{oM0FMt7tlZr z;@iv(H%t!VUE_Skp&;q&?#PuJX9ZN`IL)G6F3%^R~nL3crU<&G$1vj9eif|(srfcaHS z027gMm9O;xqvHmZWoC#K78iPRjc*C3Fn zBq3!y$N&MAaS3-ye}kVZf!0=845WxVB1%Cb@>jB^iCY|Pn-F(TkE-xVg{qWnz~yBN zb-7jifpenbW1Ft{DqZo?MiraQD_-fz_#vv|^JPC&9bOTSntEz<7t5}L><0=ZN6!;I z3rP$9jA%a<>#TU9xVybh)mdeyMV9lk@pJHoH_;RWz5E++D*ia=HB16omXCm_`<-`j zB7+!WFCwhDc2|zrkbcA(m{nkowa4X*?pDmr&G${Px|Ao-tq@ z9tBBzH5*!qE=5RUQOtN;XT`H4Q*t|V%mgM6h(l8%uRVk@WUPNi$XDI4U7*LUhJpB% zxq)~ts3Ko|u`IC1fZu?zA*WxgtF>`>u4W45@QnTf&ToJK8m-IDfSmfJW@3{`pVBM&Z`w*Q#&FO?jW#`04P z#n~5hc;*eK-UT7{0emB!{`3TfawXu3*!N{Lw|9)+&R}{YpBc;y=>r=O&r&;TB@`(e z;*)tp!USQ} zk6imLSp+G_pm9d5jJ_wjT$VWheukH29{?<)6J0nDH&1pd#ba&eIcTxs?K<;x9_nj+ zVJ`itVdqxmKm|6U-?N5D9x`&j+8-#&hV|ezilzeuxZyznPx1z+UUJY-L`oAiM$7l z-W!bGJL=3N|6<9$oufRzqY2~8{c@h<26^ngM%_DJp$ypp%mD%WQg*2Ib!2AYib*4h z&)m^JgJsX@>x?t^@OJ8&NiTb~9iwVv!?cKlNY^k$o5sj$DP3!dQMy9zG{Z=}T$MKW zZKd-4R667`tjCaoFo*Ip5{_Xu%5wI80_#JZ zwa$ZoMea3lhCxK@R#}s#*4s_+b2aq)bNKm@kQ0L6xYSgo#d0RS%7L1nD}OUbqow>{ zDL=G%`H$h@pDTX`f=9}?m+~E(mwzm?d_VZ55C0pf2JWlOTt7YjpDZt&UiU^-6L`sC zqo3`sH{Ppc&XoJpnv@re{#^NwKhxvwA?5R%mw(~El)u{J#}Bc!xZ9|tQTyRPrP^); zE2TroMK9b>o+*#QX3O~jLYDi4&Y$RN->$TulctIGLv-dWXL1d$6Qk$?_EaRY&kf15 zk}mrBN z;(Mg~`!_(A(cfpTSN&zaQ{6S9?}3fxT^{0fxt{69U5}ZP^9%@MQ7(Ennd@bCso17R zDCZ;Gr^sGbRk`yUlu`^l4fEE~CFN%tdxVuKiqu1hIkw9dtA2OAw-P(p>%W9DCQ=dy z#&N1GbFugfCuNt2t$gPLN3|0TFd2(2rV=k)R8N7Ydn^y>y1VMSPnk~L*HO0|Xj%LO zlAmesC4OB$Z6RHk*7|6r(nN4K64|Z=p1{%PlNBw5rwH)7Go3pd-&95~cf4%lCb}-y z87@*8x=DtY$>5$(Dv%MC<*b{)R+alZUEzH?|77}SF1kmMHB<6GCn74*b&^iKLZv<` zspBNIKS&~VluqrhQe%=jP*V4^0hH)+FIomGXiv*PqfDw9?tSznUd-iW$|fdiZeytW zwCss~%~B;^95NRRNK*Qf0{kc5>S(RX(vP)xbcWaxi-&u)Uev7C=e;5isUoAy#p+Ve zq&Y#=dZ(AAT-WNJsj3WnRmz!z#vL8yB7y2j<2fvCFr=NRKB5+QY z%@%g8?9}|`v7`ph1;k{RMP+>6d@uz~h7xD9o43aqBAMdzUgRr^%6amszy7pHGA26w zQ8pz6fzC;MHy0P_?m}X4nNqjK-7Vj_e>**6E??oSg?!{z+M^JGbf3x4epdSarBoP? z+{uqObaiK9(n_kV6@YW1!qB-M3^vNz783}X=3;>x_jyf|--X3xUM0ht!S7TLTMv3= zv03yJxWyxt>9)n!D}}AbZNKW3AL*5c=CWh}7orJyjINKC_1(}g??pt4Rkazt)r2c+riuaQg2GZ=t45)7)B9SqjiW*!4Q*qE ziQcY&9Qld@${YFy0iY1x-=QQ~XN2O<%TfYG8igA=iOG1KH<>0_sG#E-(PDOtF+EBZ zfPRmv376JB=qVw)q3>?<4dB^OcY+nE_1hy4ds$g10nXgA!uO3xE3&F(&vo(;?-(ll zcG7yp(dvmxHeMbUQC7-m1%H2B6Ne zdZ*z2^}fB{v_BAz@#)@M()(F7DZZcc)aqOq=5!dwagHYsQ{WL_xUaWBhi`r@DLGzB zPWds3z!~&Jt?$KwG|^#@^ZCQLZfHR$Dw)P=ntx<6yX+HStXSwyG7Af>x@C}36IBZ9Wkv=$d z9II`~$8ix}T!&{5bJ2}pQDaW1e7q66Mlr*Zp@K3wT(^X!mmGLeSe*dt)%`)ZU;^=f zaHue5Z$+>q{FMsPN&~`+!FmWQY8xi%T}{wUUeJAz)07(B7}OV5QyD z$(ybeXI!r;Zc>izQ#n;@N#A@(C|##mepQ`O4iBoBNuOVjLZO_OQ)=2Xe-t+F+M^s* z>S!$XZne_1=7}g#tfYnH#To3xQc5^!{3e)QAFPeuEqa<3Lw%RZIs1H}-h&*JnBzE>+7BC^e>5jW05+~F}GZX_?SLNOfqmcQ<^ zu$7zu{YDa}s+w@ieU>ki`Y<-v9M|-UhlA5PaL5t8&Pasgdaj^jCqbciBY2-DmweIhw z4~ec5Zc-D=_w>PB6iQ7jR}kG(O)TzYl=pNse^A-GUd%k?luI@FjfT=rw^H{fl1E6g zuTku%qSfJwJ^pKkB(((P7K;zdfNlgo8-|657^f=wCs zo<_+dbn>H;Tr0^_NygAuV($x&uP?qJJA6I+F2V>|<(xqOp>IQ7JM^tcEfeyJZiR@e z$#Tm@=tc#jW$b2|iweND^V@%e*BR5YF7}mg5Y>P)XWfk04(Ko8uMlCA2xPbOcua1( z$JKqib3X@ctk_aD*FHqnl-)IU2R*=0JkGAsJW^&GVS>CLaPGZEEr2r9VymshAG3vP zrZ8JVn*^*=Z*|v8RFX0~$i1gTeMtoU`VkOeALeC1ljG)Ku@0Q5OLfw^prZ+2V7m zN6Y=%-%>y7j3zXAp$C009wUwfU=`x(N_lrY6M%5w{7N}NV}v_M%3zw5kFgEV8X!*yh9WCF zN_fZ;sO(#zvQVO&_&Ou@Cuh68&i7b&l>EIMDxjiobrQVPMd(TB%2`JqMN_xpE;n$G zWT&#M@N+V{!V)3+Wy{aMjdobPpW1sE^!R8{w+l^B-qRZg*~Ub{y0bL5~@bQjrN zxnl5VrxM8QClM7riM5;uMc{V}7H1?uX9SotjlB=IH>#BK2}TDHJ+Y*4IqP(RlZL!I zo7U4ro>n`4hPKP+x-Vdms!BI||L;|^cSy6XrP-Gn3H3vNP{~t;0lvf_;od9B_JKD* zI{uZMDvC#ySCY(yl`3tEa{-5w;6@1!!Q7$)tH}cGfniYQRgLODS~ou$!RO4D`p+Uc z;eXSUa9xsG#IZ>44FAfw*?~YcZ5K%|Ft8(`R-5WYEkfMHR>_@_-#cFzSuEQfkmlNO zDQCFVAn=myN^tRIx!acs>q6)-RO@c@H>U!XeZnAd5SL znxXMI(sFHaH_4y2-^Yh_Q0V43XG}C#{B)Bpt$P0|{*nm$H1Gs;liVSEQ|YpE+Pj2+ z{7RXZ`_28 zI#gZCo2UE~_m31yji000x;e}DNf`ko24>;1D816BbGVQl4otRMxXg&*N27$|7}c`0 zVufGTr_Ns-hROwfa^H8Veh9f>oFe>jg3vs6PC;b)l&d+~yjq<6d?Cvn;X`R-*bjT^MoFjlp6kOrNnF_ghF_jwsey-ufoB&ji# z>fQ&OaE@PpEYkjmMJxhKZ%trzO?4%>1u}e`iMZGM`Wt_3499lD?U()Af<`X3I*rjqt zTnTsF$Blojbe=ejw(**3gu(|fa^SBc-Nmc9lFem0qPl7yFk%zvth0$M)8_eTLj5@}ZA6czaVB6Di;lQnoMTCmnulilKxzDMqJ^ol&Qxla9@@K- zaHbKn;XV5RH#IufNV{X#K@YUOsig2dBif42Ijz~{Nh5yR7)2JJT@O<3W?76xxg9B> z=BH$>ihc}oAfjKDjAM01iCWw!PiLLy0e-|CAm90|&M23lLXR443_E1RmI%QJ0{J-J zH5oely@^n-i=A1Bs7&;`*(B=ulKJByQr$DvrYz;RIHTlUf*JN*TIK$moK6{fUkcv2 z6<-2tbo3;w-MQq^k|g#y#qhY<2Ar{8UJhKnw@%s#!+YbpvL)nvlX;1qFsC*3Lqtzp zmq|n?woVh#Q}iy<(6)R`vbOROc>PZwWTB)AC5g0-6Bm9R>j4RScCrh>DE}od!;pA~ zr6psl2il<+`gS!g7^D+S*jI}Fu=UNhyt$Rq_XdA?yW{}E$3ze(G&_|u{-Qi40O!_jo&h?Jr~QL>(h*0l4NvY>!Ib-)cO#or#n5a9|a!8V&+ku zEWPwZfo5gII?$*{^)X&D0-9vaFExtOtip{(^v|q98Agun7I1L>?_+ zXnivPmku!mgpD$KiMuLM3=TL>DdGT%R&p>!(BuoTuP6N>&vGx1d!_0i;dGt#e9}cI ze3K$iBUJn4lk;EGsUwo9{~;Ao7Jou8=*$hZAnY18 zikt2-XCjGdStnSIbpZlScWhn?@$NHd*$?a2 zGRrEs2WvuB=J~{Yb&gKQ)L2>3#a+e#!H>np&YXojTlUxNi%BUqV21M3cQ-plt*yfK z)4Ny&H7Gh9RhvE`RPY7HxRCt?%AIPd@IaV2F=*unovI3D^iZGqlA~+$?X`US@E?{s zEn63|RnpX%A`RQ!B>NafY$EgOBL0gqp06G2=s)7yRivJ`mmhP{d34no`2^6A{AE>| zMbahIdbOWra~lAGxz>mDkV*>oObs$F-QzXkqv^4;eY$j4ee<#reCDi@0zCb7&+Ulh zPqxsH1#4MVARfm6LpitWV$KhAQ!NNosf_hBQI93?vSrVB zQmRR`8Z0BWXKYq;%M3^V?AK`*>YUs3$36NdOW>Gjm7~)-CVS|`^s(YyR}XJR|2SIO zPT&`B)s`(8%g)Q@XIYg8pLnaM$tC?BBTj-C`9;^1kSoN{SKoW1Uxc$8)=|N#SE+!v zj^ZiUTOoUE-_;H4s=!p!@r_gs^r6&6ssX9nUMba&x9oQt;Sz|Gc`7g8L_w*AHobcDsW?ZZt z0ePL_05V>ppePkTDgH2rR)EqbEB0aeQFW)M>bK%O_(Wis_~4H8);aq-q1JM?VvC70 zD-o8KDLiX)Mp2e$o#<^PYh=uTR{dub!@QLHad@y%38U5{5uH%QXAk5CVzuKRmBT2z(hw+#7{x!wv%+^Ki0f_3x# z;r3=Nl_(X!&)kPc^{f-2-%#R=&NLB9oO~KTa(F!Jbu0<#^-Cb$*-UiE4iv7Q+$vbO zW>VXry~Zr43D}*35`k(fdF^GUz05uk`K*muU6)g^rNsB0iRbXFR@4uwI-B-4!Nl#N-yf{#Z7`?<__b(~G zvbeSUX(fOB@&{P2EN0GGiQ|tocD1=Ohse@v&B%^6j0k`3I(oP9keS~jCp!?o%zsg$ zLr1f4^+ZO${?>NM(O>3Q!(T7M$D?MMeJHYB4}Yy1{#Ikwx1@0#v7=qb=-ch5%G@4} z2S1%0GUoO&=Hng>`95p-Opmvol#KB zF*No-N%c3`7bT8+9T;R4Y;jx3yprU6G*mw6ycvho8N1tO9P%qqfPeCJ#vx1Pn8`D7laa5E3N)mp%e7Zq4clfM>P41` z+h-g)ncqo0XB-;HFVWB9!L0a*wYD0g7|2JY(msjmWF~(@1m|bYN^Ay>>k?Qjeehn2Rn~<9~qh zPZqkXGA~bAxarb!QcplM89B!spB4(lgI3|bAnX3fM^b%!#sqTI4amTsQd(qo@RY5h zJFy*Vg@)x=MkoI~|P=>L3^JuM^@&X zzHU^j(Ihf+23zHBt z3l7@*WLkrbQXu;e^c+Auo$j1;Et{*DKTogwi_mx%UfsRWAR|^a6rU8nKPyo1fq0I5 zXKwr~*!EKm#G=MPoJz}EocD1)_+J6325Y=oy?hOg|J5&^;05<+gI$I)(_I2TrDLv`nC8>5;LWru=kC}TK zrLh1<`3ZQ|ihI1KImyDckf=|6LdHd_LiSeY7_SRMuUeK;pXO6--QSwtKQ}5AU))FL zD_Q#KP=Bp_^r1^DzDNn-_?;7Ipd>zM0#46{G3N_}RnY#H)fm=@KC-Ag1svF0>W&k7llSA2 z!l5WyU*0?7=2m~5%ZjC9PpI&lTR$-t9D|Ry&t!FQ^u`^WBy78heBsSS^(%e$+Vb}6 zzeX*Pm+%iftpA!#7Vb4ebBP>kUvV^57&B+nfY5PI#-TQjta#qPFKU%#f6MWAj!_a7 zbUpQ3(n!aGwHv>#JlGZw6iOMh*3tdSgYAvzL|!Woc3_iH3>UbrZ)X^C5IHwsUk#P6 z@CRl8<1W&IaTO;}wsoH572^8>nImY+4@#gf2^YpoKj#x=1eaH4ntm4NEKdv;?wD%S zbx+D8tI)ZXJC=6)1E>8iOVYmPk1^*5+QyUHcJaV7jgt4Qg6hb2T%tPBN#-=^O~HD* z^e`?QK^vliV5Hf8ELJQwpXSpmvti^Yc1Ck8V($o2EuTjZGS`|BH3IyMJd8^Ri;TI- z7M4PIRR+SXf`cN$E#Df`zBXjq5Qq)MB=g!;LKT*+Xhdl)l<*k5Jlf zs(Vq^i*~KOw(i-Kyyd-aUgg0yTxme7!JJWq5-Ify27@_c_=T$!fW=b+GKw7P;L%WD zATFK#h+!-dbrBl6q{yS8o`U2q>x~5$`-FUq1??&iv^Qq=qD!G_0waEiMv`R_(2|Tv17z!SZ*-wxK6uBc*3G4-Ce5l{_y=VG1x~KE4 z%19IdkpOO!wLz9*KqImu*X_zToRO35yAzeEAI!U*d8!RcM#ZA;r@S{G#2|zvnz7 zFVgkO10B5HgI?(WSyfvS@FXc|p)P2`;^cwjIyGh)qeSx}6XfdVQnJMk4k3@{5W*^a z(#0|*b{$H53g;kRi;4o&B{vXS(B9e{LMM~elU@C!H+>u~5+zzXPYOn28-t=R_XOeh zNmLloQd(|a-}|K^5W^{f*vHvGeM$=yG1xs=_suet0Cx6eRx z!2V7|V6qbh8||wPyUT?XJPI`u3wR6I<&DTlc2xm@z|!98?gN31=T9B?yzvyOHtv{0 z*9nEGDRdi8&8E=bGtDHYP|1)vg|di@>hj4cv{Hm+DAB8pG3PN6oAItY`?peas^}i0 zc>kVvd7dDD#-Ie0V(PR%5QJFD^eFL+m}I-j1X~M5D($=Z1p8&93HF%g6Ksinu)J$p zzsi_x3AVBRYpS2)P<^B>+un<-;dnA^_r+G5ae}jK@(wseuiCKhefAUE{RbtiTWivv1Z)AG~m!qvlsFx_wYE~9@FlL|2;P}+m zN(?y4f|SR0m}~hCG;A+Z^T}or(V6p!Tp^e_pM2S5K4I9Y`J`tl-lwy$SRkqz%_(GJ zPWgwPP@X}T8EWQ~;I%tV$V?4MBnLJUW|BYnMfte66v-Yr37ww4wkt_o=LIv8T& z+)jIew(mrkCFb5Gz>!905uSq_7t2gWn9%G&lAF9_6vmif@13z-t1BH=r2zsMDi5Hp z>}13;>qI|P4}|ofH%9axWsvwWsZRvsO0gEzL{V%a@7Krz;ueOWBW10?v3)fD+b7}P z9};Q`A;QN?Wm6cZ()vT(HNh<(aD1B-!~YPT*u3iZN>WVj3UJt38qLPE!&$*#;nz|z z3Id;}wT0)6*f9y?BB#_a%fu3QQh@mfD|M@q4w_ zqj(gpN7Nl!vn<~_J>g!Ru830G@9PeQsf$V6vZlq$vUW=wG_ChwB3bH$o% zBu?UQQ{klinDB3`b@P#^NqjctC{$jdx|x?kz`{}2K@6VCJ7DQ~ja1$bprIxz?^BrE zj9LBYqEdP1@rud|z6JGsMeCKAn$59qL?^&w%_(5RpcX0Mi*L28AFpYE(RWiWII(P9kw0>j5PlK`E$Kpv@PAepYQaCw zTYr`m9@gSVTS^gRJatJ+O@!D2>Q|EU3VKEA zWl16CuERU)(@}d7ki=fWJRK;f>6R%YR*iYv`{iQi02 z&C4o0SYa4<%N<=J=VDWMus0;ZgmwW)2g?(p)oV=wWH8F0-X)>h7bJ5ZlY?u3TW+>!ht@}qn*Mr)X!xUjEom`QcefeQC-pRK{Nx5vLJ3^_%_1RKN-`E0XFZA@F&kYv7GyP~- zVa{w&OJFG?Y4ISs#x6Bq2vRrMJ;h-}NhO-)EE*)_tyctX){t$85$HD zzsm$AYeE|d(`v!O&YB_kL2G0}@=-b8y5mo+XIJ+i}u zE?eUFi9+Oi+bsiZXa~$dQpd?; zO(?iBeeb*N$da+T5CMR>!KL#zMyifJl!lP>Db!|%1SNBYM%7U@{dcflGfXvM9@A=*w z+?OKa0C!6JvYd;FE2p$BrM1*O3gIBs#l#j_=1)uII~w7Uw%k6<@S4gllj*^)6xnS` zkzE-%0F@m@Kg0)kmTYg4vxPa}WWZ|K`%~1-;$1`>f(ObMXNIlBhWi%q zkk4N?m3eg^u@+8}!OILj1GMfRm_u}5Z%;O6+?r}<+E1O>7U>TSG=Wvx|a48 zrmEq+pQ+(6y)UshKwziQLm{Cv;TJ_huEZE)bw%1Ha!K0rLS8HvvfK`+$U5y_W@jK~ z#cv{F=>>ew9OeVxNh0>n-R^EC6_lgqyl}|{DGC^+7}LpR#joZ7#d<;uqk^%e&{Fsp zG7G7BbJ}6vgM~jNd6I<$^w+%hy#pF6c$U+S+7a?ntu^hJtluYgtm~1|FG!i@*)v7S zb0)H$M=N@WL3?ZZ42{2~HN9HPCwt`{hRJ}hyNb>MFZWudw5xM3OxJS@m6@ZIJ~~Hj zNt!w2l9dw0^lgE=7A~6BURO{Tad0;Zs?>KLP)#;wB<9dsQ?>kdz5#cER@&<8iJ|up z=^pc0j+`fy5SD7m!y0{cxP59uyZUe=P@h7b&1;)QZJxr`#iM!N^N?@Q&M_Q#$j?#Tn1Hru&!m~HIYq9IGMxQ(y0>xe* z?!H7xo9iKGDJWRB>>u4IxtmL$jYu?aZHem%St;V!9IIF5g#1RiHYH)QT)9%m6DvyV z+!knC;~wI4uj-%20LPP=cP;wdyBL?8e$4RKY_dPk0>j(MyH8ygDek!OSJY!^{tQm*uDZsLrPg( zVcpM|i93f1J1QkgZx{mISR)t2lfP zWfe!nP#!?DT+yI5F4_d_9^69cFFX>yF&K|ksRq2wfJEMRFb|4pzKI9Kxdam6cEw3u z3-?WJQ)iSEespU)i&^Tl-|%5CTheoeQ@1ei7FK2@n?eQK*^UUetEJ=gnl_MN{4H3= z{YZq6(8rntvWrMJ8!jKE!n}$BJldb`aYOI+HU%=ElKADhW<>SPCku7SUsAA14jjx~ zE@bUtp;X+V^?t-@>hzu3g#wn~i2#ynTjCbHFu$wi$HrbXM$e_eut#6QSf62!JX{06wirA07DR`TxI|^3xEV6@5orC-z-K$@N`FNZJQ-o`TbCUl)-ykHrb0!D~sE~=4oN^~(0 z3NSuE>e1a}rqJ}IPzm=6R+5!obL6!r8(eWnK;NDvUI>wyGLaO!1h;oNcK4ywZU z4Npn{B^{IdR^oM2$&{-Dv}+@3`V}LdAU<5mt^Fd zDJG13Y~hiL_5z<4n0flNri@%ZwK4m0BoPiyv+oEoxp<6*VNs+a{CE~ipf_~ zdr&h)d@ce74Q>Tknf7=iY}d_A3lX=ROv33P{Ub%W$(jC{zG|kw@Em6Pg7wLnzK@{2 z@%+$&e?$1HzN^b3({IVfw?Vp`@@*I@Z^r%APVI5xCs?tnWa832(9BxlOj< zuHeyQqU+*cOW*ST)JOaeMA2~u;U-mgms($E`VW>xZX4&bk`vZiVuq7hZaXNy%{lv6 z@oE`taq6yqV7@P8m*u{W2tb?+=~&*r?{2xA-Ctzfw*qgr$bnC}XLk&#S(DqCiQ9Tc zzTC#0RFe|^3++g*O9MF?{U z%Brobl(PKOhSw8mlv7vT`2jlPC82IPGhW+L{s>)h2B;}DH$B2fdkwmLEnKtp>)MrH^`m6}YtkCbpxS;Ug%pX}!`~*CQ zWVIJuTqHNxT&obwjREE&LXK!3Ar=#m0HoE8J~_A7a7t`oK3)6-f|F|~UL;knpOBMn zavjAOmAh+qa+~6n4wMf#J)~H1(fr)<@O*#y(D@z9na1#-h0ObycngU4rFS>A@@)>p z2X+JPAprx$KdM$pk^JQdemP))M{|0=i0sFa-REV0f$X$a_fQgE^#0Fu*Ib0*6T|xf z<^1IQlWaJ=4eUa!Jgy&zwx;J3ZcvIwokNXFe*`ggu=(7O(i z`5=+Ej3t;8lJ5ia0ZY^ceL!tKpDDXYekhouGq`I7`-wcCY7y&6y2ZB17VGX#kCz%I zc{NloRZX}yHKf)*q~GnO|3#3P$5GZztpDczOn zWL5BTkErf;4W1^0$$NkwbJ4r-m$UH?_&oiKX{NC}Ow*t83li5=_CN85Cq$c~mqzj|p}&V0LWP3?NBO-{t}OiJ3R@wrsb8Opin}- z)E4E_1FHX=zYy}{Ye}jt8Y3TxLBRnUM0$xFes3m}5szaew;g#BfympptSEV#uiu92 zw-@!>xu}IL3R23ws&g*VInS5qAa-PxemirMdRwR8#+)c)h-{NLP7dgwEE!m$)i{&} zKIZDTSl5b3Vp6p^Pz+Q1eC7q#wq;jiIlNVR4mu^34TxvPj{YL1&Qzg8L6^S z0gB+@A!;RmROjD$I?`woc?p*A5a$Up@5j~t1}R5*y-isnSK~%|ZBvy6i{jJtB33P4 zt$ow<;&m|MG#(;}Q%^$w<9wPN~Wp?lmEX2xZsFu8(&%=4@t@3HRW> zADWTFtt+})h1jl)+3Nwgx*1|A$>wWV_1We>z6Uh~WTnDBzkjV>%@(|6Zrp8F_G71i z0Kn#BZpqjVcZGcG8@3xWPvuk6qp*KnS+k6pa=D0V?K0JxtiWjP zvF@rhZQ^d)AkDCiR{mH}ZQEUg$Ik^O4q}Xin%h@|bOa(Hxvc6mC zw-3o*?0nZ8mIaR31P(|N=LkWtWji5nr_ZuK#)cIjK1yPAukVaG;$*BWoXWzWE&#*A zu$ixB_3k{33=FYIdS=;IhXVG^mK_{g5}z&1P-;IYKcRwkCBE4cc#6C(Q1czTG_uOq zQn-|)JQmdJO>CmF2@SLt8h}PL4&Ck|MHSX(-vfK$m>Sz@#6}=JmSDSWa6=+T5{T~x z8LI+%u6I~HLrh%t`ZpAG;8}3$YZ~64_t@zLh5k&^d zp>rD}qtg?{Gb7@XF#%_X0j!kLU}X`H;`d`oTmgkR1_BWdm19XM!ji&KAPv50LrZK0 zJ|!ee><1;Ey0=XgixdU ze99gFD+n2vPv?gk;eaq4DugRAo#Kj#pbE+j*{j1n3O7zYrtpJ`)^(iM|I!}fiF%t?&_lq=)}p+`J|>5cjhP<-lH^n(8~CZI#5IL4v5$a{QhOC!-N!=#$0`aq zs&Gq%Vdh}4mK}KOaN)ZZyJhDa>!8T3t(^Vyv4jKBaiTmn_}0_~()!{5fM3~?E@4Z0 z9W3MffDP$@y)59XL3Gaj2f7a8nZQ>_88mAndKJBf`1%J5-<^JpAal+~z*+5^zrX_r zqSur60#WIO2<^8_`+fHm3MKakWUgWou|WLL5cWR+>~Bv@^TZXLYLaOPa{~Kif2By@ z4?~y$nZF+7g}m9uf+D6c3I^=e6w66mnIks96)Loewzt8R-tK1So-AUn5uS*AoUxif_ss%Jm-5^Zd!3*odJ;8MkaGhILRd*E6 zV7rrcCb;x4pLc^*_h!^{E&SO*2qmso!oQgU0OaIAK&TK0F=N(tMyUu`%^1mfA2&aL zjyGLg!G6boueE)}8D5RE|7(q>ia4@A2J>#u^y6Okz!d8*rvlCT?me`vzKPvHABlAT zCHP9}SMCp#!b16_WV8>Z=ZhLOU%Vgi_7Dx@k1tW zd{pcc_!Z(r*QiKWF_S7%ItF*BiC9+3%HOF5B&GG0$w$|9OU*Z0-zX`pzcr-^(oG1qlxK3ep1<5h*|kyN$DQwi?fkP}SmG3X!)7zsHtYhO@15V6N>2aUR;`J$%I$)|y- z@Sw$DD$D(a^w6$>lfVOrkq8!^isX)`UP#VUQV>}_@hWZ4W;o6I#U#ltYIT(>?3j#Gg#4mxYrXf!Gw8{?iY%ha@dGc)f`&-a!tsT0X6U`f!< zxNkimJ>FiuKPQO8)iRi~A^x|n4{FqP;c&X%!~H7{;vXqvN_W1K?tJBehVV{$|2A})(fcDZm{jkJ zyxz~2c)IbRe|`reDq%b$(?YrGO5C9`Me9@HMndAIvTRpN#q^1Q%|fx0i< zA|b>okeW}PeA4~kzUQQ^fp{N$e!^ey)}~?u09agB~hO@Y_UCo_7`q~TrIR0>DLf;Rb%g?e$`j zdH=4-dq1U{M8TXW%^T_-k%8iV!{;hj!VBv6Th;p@5gAxvhW%0uwF))v6!OTo3;Cww zrl#U&G_pTLz9Q7=PGV%RJxQ#c5F1qXJJHpKy%0}zV?lcwm$x&-Z@usC*I9Yu+Wf5? zb&pi@9I)3_J2|jt4o~~mMYgr!j#$n`O(q_Rbvv3_8UlT0cj1WLSst($0RkoRK1qzr=2%K;b zzL#|)%yYaemtiaV(R8ykH?m9d{*Ty6)DpTuG5;KzqSf^bQ}q1L*{!8R3}w7w=s&1#J~4MLH^9(i{hr^wYuz?VyEOkb_Llccn~Cme+; zGW}?sJ;W%W?o{@m?@MzLVkLR1`GB*AS(6yVr?bJ(0}+}6os$HeG4nyOmn2$k6JciW zz#5NpX3+l8sd$5_hYM8`txi5c<|V%GaBkouZZAeeZbxphLPc`K<77_&zu;YF^}(Fj zhSIScE>8H5Hs*9!v?vY-+_4R=HPz)sdSp_a-)GvcS+LsVgsyQ3POQ~X-Kv2Je_Qq> z+Dsp){A-u`g3x7T|Ao^>sL5uPh&v^(@k5O`ir{?Gnz5jpS$U`-yaS2dgLW5!~#+Tx!n*pE} z$X_tF3u%jHyTDF0K_BaoZ<{lHTwzT!{ioP~bT^OpGphfI>6b}2i!-~~MR&8CE9Z2Z z@cZkumcj3jAFDce935O1^lf!7Kp6tqut>ExgY55V%!)zr!Y7{#u8p~s!T>4x99wG4 ziSk90e<>9T`3DM@GMOv|C+_bhds@D-Xhim8@+Y&G>%JpZu-6&PYB0R8%4}dP1|cp9xOBFe41+SMvUSa48F`2Pm^?e zFd!_3xMNr0p-`erYh%vC>{29^xsTCh5#(HWkoQYEp2l#?3>Hi>SP2ZK9K<{Z8)eql zh*Go>6wCJ{m&j+LhS4IebPq;93~xtTETqq}%IX&MRm)tX*sOeruvjF6#dJl&Vh>O) zdSyFMvxD-JDbH&Mcx<(rtAxdjIZu&G4-6c=?D5y&V={;J-}vj|Ou~&*pW?5-@z64V zi3ucwem_A`Zp>hesX31=R2|hkb|Z4o?=F5VOuE8w6NUJ^`h&u6 zqQ3}w*rNCd2ncF8>wqiVC96OWNQ!Mx7@8}ALV<|KG+U(}HK{$@wGk25xNoW^;4db} zO#WQq0o!rss2nZxOWk`ZdC;VMkrsw7gFj2-N)LW6f=2Ok6aHHpi1!owyCWQr#;f=p z{<~K4tFG5I?)ow}KvJ6j^z9~I2$2IaX}HZ;ZlUos&;AU>h$?2xSR)qp@&9A*ZQ!dauD$=9yg<) z>Z0bwe)a#-G!gn&drOUZFok4Of`cYyaOe*$?ml2S zaaHYIMau>t;L&yo9>}=U4$Y&=y};~Cz|Qrm#}cv34I}fjKhCFq0^yNRAat!Z^g;X8 zlsZ`Hh_1PzJs_ulX$lEMmY_dSp4XU5fsVZGBi|&Sj6Oi-ALeI{sg?Wk)5AIaV7;aH zV7)NHbV}=m(}2>4pWbC4dija=cM(i;?>D5BUoVZ)1n`txGOJ1UmJ^3(n|ZbH4W^t{ zX`EV$Q%d54g(C=fk-@wAn5@=dWVZBb&}Wzb8rsE0e2k@8hPNkP$|`IoYh&tui1TH< zaLNXCLHq#IrZ&3X_Qa9dgY)49^}laQVlfNre<-Z~(5` zwovCrW)2e)-r!Ryqs&~=0?dM}53Nxz^>-Z!y$1DVg8F(@#j9U#eIi_Bz3TMAF-zY^ zvKMU^oM&VYz-JYcNb^ZTSRR0^7N3*JW(D6b`T|*F{Jp@b#&6Y9?D>}O0W7p0Y4 znoI5I%Gf4n4>8sS)tbG9PWAI&NN&UV)%f3=ctcO&s^Z?>=&cQW>=S2Xr)gD|o`4I3 z@&0?D%lfhWS=~=BUaCjug!v2z(fOJ$Bk8&ziAO=wXH{l0;m%*`M%FcqUfbBp7DyJ3 zjP9IJjB}UCFQ>f3S@r4f&X-nkLw$N8v5gkD03xV&$eXG+(Gb)L;MVp4bmH0u8$Pm8 zb$GA&-@+lX>-v!1@)}P>T7WpMmw=NnmbCSxv=?j`{^jD^G4z?M%`3TgodX3|#&@n} zhi8M6>QI+@in)J+ADPRGGpFoH_7pjjwkzbDw(~IG%%N;obzsNYHy&RpWEA8wD~w$5 zNN4fA02s~1N+xR9)qlqPqfk@F`6rjlzms2GcZ)tL-9#NZE8tzWURePLs7~E9ZQ^zc zIy83UGTh6#;(`uD)6MhQCu!aJfLt%4L{^L@A2-qKY#>bA6=KEN2;-S3VJD4ss&=Vj znW>|FyO4{2xiK%+;p1V4Z2U`yq519D_MoLB9y}-ve>v_C#5u$}o$z#m-lvQILHkHk z7yE~(i!IHMa9HnM=|+ixnf*=g{O|wH%a_x@^XXkzh>E=bI^PF1_g8y!alKQ02^0HZO|q6qRPrqFny@nO=WD69LZfEun`V zRcMn=ch?niFG@ta&Isur*I>eoCtHL=8Je^HD#Hee&oQz}RaiKMx&92B+$IQjWW77O z6aT`i*Y;6HiGmwCbFUm?nwh4x{?va9n8`Yp+IZ-r%zb7^6aV#R#B?i~R2@ zRr5Ssvtu~DQqE!Ot1qR(8}i+M$_q4VIu}|4ko9$HDM4>wTG5V z&?k*gTaw88+3c3Rz4nOSzPwdpu=ok}<#75EHngw*XRbg0_O!v|zWph=n+>1nN(?6j z`){^s%v3cdZ$Bspziv?Y4F*0Y%nt*950;4h_~r(FI?4p{@LjcuW4IDIQQq>>n_jfM z=SHCjseY&(Z7?ZGpRZ;8h=#z*|nNdBAKF;RDQB(EqdZ2r3{Wn+5`-7+^*RqKcUw{Jyg zlEUkcaZ=i2TNQ&)1Y->yqn=;sTlK2?AoaI4^@rN+9K&4(f1yZpWqDpfZHiXIGp$<*wm4&#e$(-Fa!BZDuy zkxB!!D*#~Y`czQYqe0$&?FvBJygP2RefT+fv(u?o@{zy_mL&r;nTo3aW>+9p| z<>ADZCYuN=u;KbRMzt5?V93&>XHvTC;rjHjnCI?k-V%?z8;`u5d?ON%yx>N+H?te-E&(Sg4S$5AmRn{wOZXF!QyvVf-*S-`P<* zDP6p}K0PMpUD{pGsjGO+hL{)K)BJo~w%4r~sYYNbp{J{h@n(oLkUL%Ajo%X`Hj*28 zw;@wJHky2|r}@Xd{afQb+u(I{t0f(! zL%QstSbA*Co3lNZz7(x#&O1C&%I9>a8_F7MHfY2iHND*eFV#?R7)J(FEO96i!JAJ{ zo8E(~V)`B9Eu(n$9e^rK6HThgAjZSsZZLxLkim%c_s+vg?|OzNcCGWCAsj|mM&r?s zUgsMsfB^8JO$9_N3=Pf0P?5pV7vQc;UAH^^{;C$bANBsmr3+VGUkoKf3NH_3pQIO8 zZ!~ngQeya(ixHf~pQP*n_^Pz{s)>2?x5Uy5=;ZvDc!IC_KF>0q+jy4q1fL6r^8}v@ zDtLm=kpVt`8;@YN&q6)(MLigH2=ZZw$60bcEyXkUx_D%3&(<_n?bTqjz1TYy+;VO5 zspc)_VW@M9xsEDxda)O2AVdhm;WpUdZ8Gao zu%C^=sGPxDi5QKG68amoD}uwXp$N|Ng* zmNV5>^m0!0du#g1%YOZf1s!zSqDRrW7Froc+}~lIr%#Dy=HsK(PJewIR#+>kr*6>8 zSY{?uRarrOO|A$xU(F|zp$!QoF<&$8!(nA^Kmm9aKGn~ zy|cka%?8ejHyhLAUW=xW_NMG<{yW^z$TTp!syN~j;-<7A@*dYV7WXu_?bFi_D-Wi8 zXnAn`wf|Qh{J$&@a{fw#&1a0x|H<=N4nKqHGgJPz)@S<4A6+tl;7OSX$%-h}j)aJ1 zX0hGWw!v9$BSA=CJ6-mP=_wPBU{Ypy?ZiygI zJDt;rv8r+)-$5?+^O?^ZxF|#t%InZ{?sjY~L0e^U8Lz51EmL+)oXtvSxhYo}mfJEE zD93TCM^Kpg-(`u@kU8#fCOd+}Ag|E{OZhiH5?!>BEIrYVS4-=M?N(ADzsvR88^%$S zGTpbcu%KT)lh&KDp;$RP7F4JO{d1eN!gyp$4p$9(TtbSq-l+u) z^1i|?A|?j1;y6*kmm-WMTa-)A;|B(xgIgt^ix&|9q-Tq>VyLrXl2JH2wwB5Y)-!Aa zDS+?n*jhep11czaXf&D7hN5Av*su*sR6f$mdG&C$4l|y<-;9yojQ?{XMw74G$y3NI zk0#&maawhMD>Eqf)8*MrA?s`*iblS^y}9dFC4Y_NfGe_>GB|<#C13w$X%3PP-cT}drlo5~T+N3&!6`l(#^6C)d zlV45klV5#Me)FNovcJWuyQiVXcUqeVWdE5V`^#U1?a$*E6|)>FZiz?Q#r~(LVW$*o zRTS;mQr@uzhig<tdjqT1 z56T|(*jW1C8T>#JV?8^=`$!BJCyPlJabWiYdGGocB_5k6FXSpbu)G-Mv@MXl(4r~E zB1;Pdm*?;Fo|%R#ecLYNhFx_@Zmd=Y^nkl~)@QElX`H?@CnN~dWLF?|<-ugm!Ma2h zwn`*IP=7rOF77kCbiS@C^!x_zNgS7&idbnAQk!Mh8p2U-j&{6IA?j|3?BE05Wy5gO zThSy}{^5u45xO!7g$L%P9${7A#ZHO&{ zqt(SAr3l_FJJ8IsLKQrs9K{Wh?dC&(5!tt*FkAEeX7T10jjLiVVoev1yva1wjDP(= z%hlfbr{DbYG4OHk|6_cdA5VM2hanm8@g(@DEu_0m#R1J2Dlyc75P?9@As~>pa+73# zHw^(bAps#$Hig9Uhk-G(cpuCd`%^!Bz(1BgECbzZ7$^>%h=J-YeIU|Mr0-CII7s(k z#&aBW6=ZT8Ju{qhYG9{ml=eKX>a@%_Ow(Gr2k8*YIwe$?x!ANvk)c!8IBam_rWe3k zdmFti++_k*+hmN-x+IrRq!>h~oy9M+#K75(G(& z(S{ep@pPbpnOsc zHp;c?3|fh>#|nj0Ty}+`v9c=^g~MTmq61nTFO*1oY2c~DSQXJ#J!%U@Dlwu~=HAB8 zVgtY|RmQPY(Hl#Z<7il%Bh2bToMTaA%%L&c6`g?^)fjn%c)QrLi#VadF~uk$6-Tcp zLA<`Re)PI}XZahA)7Ld#(7vdprKO?6udI*w(T?|zj&^hpRcK>p#VoXc^}MHk^qXYg z+c^Er#tUAz*pjizu~H5%sh!28AHJcpOFwQ)XP17wrbeak#oVy1?*7}_JyeLbNS#fzfscpP z+3v?|tCY=Hh1$vw{B}Pa0g!jLR&*bo0!+z|*;XmKv85qimww2$QfT(lkJVOF@?*AD zN_MO|Y-{yLXlwNcxAlE!rU#no%UQFlKW1CCrjLyY+dAeWv{lxEk4^)^>zI$(R+%0w zz4GHj)2nLyc=T#YhHYgtuae8f_b0XjnN`nrU}Mczr}bvMFtvAE5l$v<#45c~5@p^P zr>XgflEA!iHa~FLza(MSH;dxdyit#!-b5sV=x8>+>m{YzqoX;5!a2I-?eXaw8ZX#r zC2zKJLZ+&;qx)!O?$|RlI(n_5pF|fuB2i5lMD>OSCV4B_T_k%fvLV{B`)CAv43~fI z14oY;rc#A&V94PII_~&Cx4RX!&1oZMCxu%?WeT zhnKWjrT)+@+O>8+wJ-|x5uCXz~BW^?r1ifvM#G;#y4mKZ&l{0IVkV zg%oEbW_c(+*$S*i!ylsa|H*#W*oMk)_9P4!p?xBkC~unFOAE%(K#$JOLsSpC{=~j{ zL9cytK~pSPipNp0>lr-8(Rt<>?; za$(ZCNE`So&C_l*v9*nr$w^%rn4|B~H@3I$&@(1l?Gi1H0}UHVvN*@FAF+YN zu6_}DOTy)x$!k_)BRSt-H@#VpX$Pw@Gm@>NO~l=7z%#&m)~vq{VO?AuUGxxD^k8ab zf%GmZHP-e_Ko9AVrz_mad}i=|xfVon*_yQ8I32TuY}fnb!&0U{Nt)rj1@r(>xVr@ z4%p>I8uwhxJJiig!4v0F=4bS_6~h`b^EINzMaR@28=BQSHpo1!b?*N!>M-`tNS7OV z!;QSDals}dE9gtsnB3P2YOIa;!VvCobM_$ya^|x9q^@i7-?H+E30N~blFS3z$8!9C zZ@~Ze2mEj4wM=DNx!@j%K?gzWr2ITlAb*}a_-sW%aaBJ_Fh_gI+DDFi+YtykDS*K& zS~-9?z#i5s4<1!LNO8>5n;I418(H3sACMc7Ntz|NL;wV3==(kBp{9P=d!&Aq6!uEq zi+Rd3MPwu?ke_ow#Af}0q=U^%2sAQFIxIjG^vPTpWR{2sGGka-F-0O`0rH?v=As~T zu*pL!rj#kOz%M{3^vPTtWR|c9AeSq%gvA0RL!ZngL1s4b+K~cce@TPYMhx@ zC_;RGxS3BKe7+GONlw8A`_GLWk6w%HSjWFmmPn3hcS%xYB74%^~qMfWzy8IteCt70#yA7HF;*r-IBim#dMrW)*0?i#r0%5mq z(9tNY{K%or*&jg-{nHdCs(;!mYM%T^?^K+-Y7j`Fug=(0?8%mCzzd6 z?g{ta;E0r8_B~=*`O&?v!?Ka|6@*(5dmBD%(dw0>+Ct8zpaq6 zR2|`IiOy~chRUyyVEp&BTiC*j9Qzx<1djX$1KKx?;4l74;WD~^c0Bz<<>F}R%w=^> zTXEe4r>(3G(NwIRo3aCP3Ju~$pC*{pU`KE~-9^F^v7__y)p)PwIwwsb*KKwPr6)8m z>*JoH{iJ^Tqwtfu2D_+9A9ncvOx{@LB6E5{7>Q4}Rv~p7&Ivo+7n?9IBcDSC z0?Up(Y!Yw^xUvJkV4#5y>2nbLXz1^t`C9*2zOeg5k~3Nli4^3>yj^($z7RDSa)BQj zBRjQ047OXyVUKSxOI7tQk^=k$IW$=+nofYKc=`gvFtzy0wZ%#l9AqRaZdb!eDs_W{LKUh#M&O`#;sPYf#i3K_Xbza5VRv$p*Rx8k|hSyeeoH3nZl2o!`!vG`9mg;DUIH?hRn#J#=n^>?h!YW3LBE0 zQqWG>+mN0(3!Q@yzTAzf-C2%ta1En>#ua-N4}AvVIcFJ;L|PBq#M^B2fnl2(YW^Oj z+C9y`)hfF-j%Qete!0nes(jiJX-=`!p1)uITeMB0gCQ>mBLQNxYpU|@^qZJ_g`LN_ z`6AlkbNHq`Q+7_&>)zZg4+dq5M^-~z=)|Su1Qp|OHKQHQ;x)Vzr)>IW5v&16Tjx`g za8Evisd(m|DxEiuXYRD}jdyvW2*w=IXr{Qe*u2LS1T$4tslviFzf~hYXA8l6q*f{8 zQ;3MD9B#-@$nS3#@n>G4LT0ikYe-L;g=$9}RnQ&xW`J(CwuSu4dV&^u+ZBOxmj9Op zU_WJ=!>})<75b!uDFVPym?2?2ZZchJ)x;r_#F zMs(^D2H|i9WMYv_srRwbLoX&oVQ9pD!5Wz4EZ-rxRUcQxJC{WpQ_0)O*H%BLUuT zvQq9k(`-Jdj#|EA(XwX9VGrSkB0((!+Czfqaf#ho@AZS}-|=ywH5CJn3sn0w(La44 zaQkmp6cGpuoCWIp!YbJZmMaP?9i)$f15@Z?jMiVvpa4qdi6)Gl}VvkLn`^*0kojBbj^$!BOdhUJ zn-Hx$8j^ic*n{jurlMnW+d(f)|B$5Mi-e>a;|9}6j*(z6wZXCtmkhcbAF-sLDLzL( zBu~#T;m_r?X$@q5gr)kzZ?Jez8&L(ituq@M0s^k)j0%;Hadf0 zBB^N0_W_hAUh}7QPV%12T@X&|8IqIKZ90mSWtu3)XlN4xL|B?~T3?rkzj)COzs&Tm zdRfcemMJT9=sZ^s*(H=PF-k8&mR>4-XP@?kirXOF9Gac4N|}3VgT|O!obuum3?Of% zO6QbDD_Nlz4R)iqOINo_3J<315%Tsm4mFQ6vNO4*2-O;sEW(ivOjbjrSDTMIe`qFA zNzINIP}w9kVbp2lK!$3DB596L#ve;eajz#Hu^J&$Mhuznthh|`&{ZXnimsUCzKlue z-|LZ(Ifam4(8_Lh<2SH-pcEFyEbnFAqzvg2=dPk5DjC~r8LnrAA?!XTZu6Q4C<^7@k z`J(=fvvO~cdBi(HCwAuR&y+aA(~YA(%|dci57OdAoCKnTk_cFyT?(~N^9v5kc({5;O7qc{lifq|AnWiGgT@CL{>7bp3JFW7; zh~3E+2dc2sdcA%Gt2}4%Y~I}I8>InBE0Dl8vqPQ+BpKA`?X?U!9mx7MD`+@j4A8EP zMx7bng1OG{GHg7K&?7<@M1qnd9n`zmF1aH_4A`r+`xaHGrskw5FK(~C&q|L8;EG|v zO0QSZ)JRrFEmQBhu>UCX!3@5*djD$AnNV1$UK^PH-5(d4)Sfe;|Gwb9^|8Ux@iUA1 zgFEnJgDV4E-ipL__Wth=fV%x-Ey^WEE6!w(t#3c)erQNY=W?X=0Xg+E>Ye=#AQ6mx zK_2~~LFR+%w`Q{a{L2OX`)L@xd=ToOMNIM7A2=TpOxt$l4%r6mUg#EKJDfp-K}DC1Jx z{}K;P>-y?4Zzn5-16-XXiAcGN>?-a)lEXuCZ&Bj>j3ni>dAGlc4V%Z+05loXtP(ZEh*asScd83a;Z7_OaBw!P+#Vv9kwu>tc$>|4uw8cO_czQbYag%8}7`}_T2h|VM?c8J{vxxMAJ}`an z<3bDdgTCOt`mwiRF~ z{GM|M>FWnIu1TmH+P`(b``F-wy3+pO&K(TgoPG4GeNi{8KeWR>E;NI>1NwtoJ8clu zeNf{J>JID=uK8nw6Y9$PgZu12;P#I-tCb$qAJTt)Z-9P&5TvuE$RFGv)DJ%vC{dcz zAJl|>Kv`{6e`odTqdw!RAt4B&jBF)>O<1 z=z0?J#cq-HIv^xi9F5h?I4mHIvMRAEQQi>gXb987$svvctIUeyfDjf~8EKp)C#u>- zYc-|y*+z;nd#Oeyl5hec?6BslIf=)^sipsv5<}%wp{~=VB(XX;)VO`Hm!-Om(yBk~ z2cpBW?_PXaN|QFqw#~urd~v^A(rjnBku|YkVpB}&b-`>&W0*d$AE~x*4#BkHr0z$D zm3breUFyXa?4){F9#bRVGzk1EN=)G|UtZ%~!)vwN-Mym>ftejh|2yA-{8D!2xhdG` z=Yr!tnw1$^Z2@~xF~fm_Lvsd%Hf4X%h7Jy`W9mR{YuX>QqQRlf8vvRmoIwHZ7pVsi zURCJ;RqY3<;=lt2hqmh51EFD1qzc-Q!J*9_5Za(f6*RM7ib65~`5ZL>wEZI$ci#O_ z>Oq4y{6D`n5E=%hR7uETgF`!SKxl&^RnSTXhjzq(&;~`Spb?-^E6;(Dy78O)_H_S9 zka9cbUGFMKe85NO~$%Ae~`_4YEG30uplzU^2xi7Q@PV1BuJ_-e9-y923%1W^F>V^KOcONF z>vyG%bAxfCFu0jim9DkdOOx79TUCg=;ZqJz^`A|ndvnWXLkSV6)L56*EfsZHjLVv4 zOg#86JTM9OAqBvA;1tX~6X(cztJg*)n_8v6x=E4IrSp*CZKpi&)zpecR_#$F*)2g; zP|2I!aQ9c8Za7P=27kBl$Q#|8s)QZ0nHpyY(Ir@h(>lv+A_mHgI?&+lvIDCv25C5^ zS7xh$eQ8E`r))oq)@t8mM|m?7wiPw}@n zafG#ZjAv5K+D%7YMfi1lw>D$mx|sKP zoNKWezFB_iIz`3r@W*xVY;AAw*73>Fos1;a7I0lS)O#JjRvk_<@chS4-Ajbl>#D9*v-l|Swdzpn(8u5F zBhLoY6ht6VV8(77?MG|gbS8APs-lFG((QirV|Rx5OkXb;QgKz$*e7t(wBTcr9UMg8 z^_JHi8@)X``Uy^Z*JXyEQ13lm^K{G^-%VDpJGyHJf6s>Z-*B26I z@u`{N6>iO@c}J#8V`+pzJFW(=5sUUMu4Ys`polJXab}VT2Q?=#-g+*)C zpgtl8fVH|MBLG&^{GV|an8Jm>{m(%Y7(J~^=Qybwiopg_Z5CtV?eO=KBOqOlY&mVG zRR(TQI4=5{;pj~ZHR=jGH*@AOt`mbo>=`is)7&w}_j~v*{!5wV6Li-R}%a zjY6her|W1J&qb`I|5FW@bW)QMIgy>5irz&$b>B**x=fiwQnUstCR*Y6ZdzWSDLaDm z%+B&hBz)%h3$C%kXO3uS7NM9xWb@@#{5YwT={u$hgLfzOuT&FaD{4m-xH+Wt2YpmN z==m1(Cvu?Y0J;~L<}o#LP+*%E<=Sbf*1~(}vaqQq2%cq6siU7oOoZTtN_Ans70k)6 z;0|)z3NFZ1@DgbuM2)%f^tRVhj7B}XF1P=Yt}9hrR?!wjlI5nt#CL=74v7m9igs<} z%~<>dtS~k9laDA)->t97Ha{#@n&of3PXaajt3LNP#?s#|#aiT~lC&s$0m3nsK9iIu zxF3p?W!bY$(rF~&q2ln8m1}iQeuiDJGr=t|mD74W8M@L|KY;Zm4D{dF*RyX@x5#Pz zKR|sb`$|50yp`2kPL|Ni4p9RKkO3YgyLuz#EqnEV`#+m;D8K7W1 z4^Se zJp)xF;k5pOTt>`@uFy%Q@sNl846&n{W{~;=>gVHpG8c^Hd@uK=D8FJqT7@DSAz(6! z#6O~=pNeK;Un{7w>L`%r%sX891Pgl6BRcwhr7H&ABp|}C)1<2?q#@IL*F`gz$shl% z7?O5|PK8WC3h0cGkT$xbF|sFydN7JxZ?RX;sH%ni$561cAv65O7(c3w&%Rb=1gn=Y zKn4}vYZxb1v(s7pylJ`VfSR37sta-NT{<|5U+QS3o?x^-vfZCUuZ<3K5VtrPf@=LC zUvnJfWh32zo)Y!`;{X17CM&DtqaJOEW{MB4S?^r)c@ZS`J|rmySL=XDPpE5*>M}hF zdxO?E{2CfQL!B|(r~%@Vc&CG`Kng^*^D+ZnVn%inM6dBNpeUI@bnbcvVHtlH)MU}0jiYNW0wDuA6A`u%cxVddwzBycvF4P{V|fGz^<1E)qh3@x_bq5 z6)HbsGOb2KHNj{=*uAiJIMRQg&jC#}X2u z@@y=xBrkXqzn~}S0ko>LD? zguR2T$}Xw>J3t^V}&-3?2~ zWMDGbk3sV_e|=lZ2Hb)9Ww}+XByr|To|!8XJ@P zbQ)0ZWoIFPk2DTrwpXl<3bVSdJEVUu(Gsoz>x!cVYe<=CPE%L-yu6b9>-K~Dz??9(z z0- zHx%AVyST03XFQ@SFFXJZ?2nH}3Rr1H3jC9oN5JAnGjXud7tbt{C_`Sax|;qj!+41$ zg-{rgAoQMM?zsf)i)`ZDkqOt=97|;j{R_vMS;pp?8Qk~Sul-L~nfCYah^}0u_W$Ftu>Dv3hjdBXd{#g` z1wDz+XRd9b?W`9!5HMiW(lTu87+e>z;ExnEzp!t!ZZq&l6y!DQFJsiKu4fEBtMl43 z-c28@`|&DQ9fHX5w|zxcQ2Q4U4i0`*8cN_v)4w>#itH)33SmC8w>K3ip;@exTrR z;_Iit39(&itte~mDs@svlCIX-6)PY|#nWeviKo9)%{uj_d#zlJyoF(1h zb|x?5_0q+Q{I5w^ShrUx&yo`JR*zoY`oz_&w;H+6(-&)U*eFwS&1ZzsYejETY@Wfo zhu!eJkuy2tkG1%lh@6%59)HNTN8I$4qi%Q8%^2anQ@v|9XX!ZyoGEK9AcKD}0ayZJ ztDhFnv?#Ipo7uvlIe99O#ZIao|1tx;`LhHdIGYpY=YXbMJSU9O3dT})rd+Q!=sK;C zLSY;ywE+R@rt7B(LZP=g?iFuxQYVxY6kL9Xk|NEUb@Z=2tH2K%b*z8lcxsqLJhZaY z6coc4;0eC=gpGNyi8u)6tl;h;TnrFRZskIR4_~H)=CL98(Fzq)h^^U=R;Y+VWgn@~ z=G_DhEu>gERjDLMuKaMFg8<4VQW8h(;z<^9TNTfFqd^`RGebiR7D4uE2?9p`{JbHO zHMXqp{#9_&NV{=cS=|s>Gc(#T8Z`U#J6p)h=LuN!ntmM1k1n)S z4A##ZQqPv#`Qbi^=0Bm9+WPilnnj_kckgexH z(=yRLVE;;t*l$#_$C5&FqEW;oLH3r%ypB`7;q8}y`LyZ9KQyspd;1TemT_u$busgV z_b{k4XjF`$*sy0zJR*schDF_Kr<2ls;c&u~u3rWE3b;#dbpSwk*<$xL_8dnR#Zb|_ zzXQVpBZS?sZlHPN@r*A!aL|gnZbsiQ@YJC4j_x7*zyp+NUjUD_d^^>0%&T9${qntI z@)hoz&j99Ry03Hkk zek;B47JZ=Q1HcM>o4fbT_R+9+F9eVMWi#|tj!_Fq`N1qq+~M64UE7me8R8FOc;%Mx zdFMmrHljo#?!$_b>~8FTrv0Vu+2Rk?ep83@5$b5A4ra?HKlV$skf*=G*D_j5+K{R}yy-XqyRge7M8mdN%kag8mpV^;usd~eR5_02iO=IkWr zvOwFJlD_>m&G{UD_x>t#sT3SWC^{pWaoHx_?OgUxD7rfZ$lEdYd4KpP3o*8$a7~fk z(YqfTDoJ{@&K=-|-2qqrcW&dFCZ^=Po#|a&C0h3`%y6A9H^5-1A(o&|P`n zrOoHfOPn`jX3RU|MAsW%>aMJue#u31=AJi?w{myoybCV5xbmX&SZ$84a97T{WJcu$ z^C~aqta##Z5?`aEM~^feJzfuk-aj76ZS+4u zK1DHVlT(-2$AjO=2UQq!9nU9Ym(Fq$TP6|a2Vr^QsyJU{hyIV__UZ}2t3ERKC?Bp#p9X+|H+Pv*iV_~Bwj5TsBY-@<0D`NrpNj8Qk<~Q*7#Rn>vN@VuC(xnoZq%hsirF zNS$RO5F(+7f?J|vZ(|EP16J{<2~s}JeZ z#`ufuk7|Fug;8ztb=Hjuo}&?s$#OmGtrSVz0;3j1G;n3 zQkCPs&PB2l>c3TmqTkM_h1eN2HN=rkol#q;0n?@Vzt{WN3sLRV&Q4p)*3%gdU zYt5%KB;$|J=#TE4B~EP9%;XhBj`q&1b(Wk!!=1J>3FlX` zTthv5_%cp2^=z^7L>U49<)QsB_GgiyfBonBBW)om`AA!cXT8R(l>BCYLi_y^OiTtx zf;OBEX|NKQ478)@EUqOvoD4QlOusc5{9GUy&k4ENVDTK5u?Ua$5k`1y=h0t!?e>3t z7*eE8vMZGDbHZWw|NFZ#)3a+s@CyW4;bjNR{8|xJbyJlkAcJ2#ytFy&wACGDgYygx>+YA$3oy3MAmKhUX;U>lLPD6G$=QPmFY=8uSOPps-hf-=jG1brS7^9W-{? z&+}Ud0qxDh=<+r4AGET(^RLiw!!@av|Me^({tm;Ve(90?^hXhcIwTtxK+MFoV&%$y0R zXZ@k3jFVENQHWl+m?K=wGQL}WcaYU1i~RFUx~V_yyC(#QyXXGS~`^zHKweOtr&W9FiTRTHG!eFKS0z5|pYGvZJlp{}*t-*Ygz zZzi|sc}}2+?(qNVm_QMoBS8RxoJNCyv9#R4xLyzN_<%~Eqq@j7#Ay|Sgc59qK`%`h z%8hUQw#Lm>g-lga2EK$hd-f}&n-z#AvTOmP0IGmvNCqb$p-r+TMss<{gPu*JN+O~y9cKZvc{`o!7#i}4;Y4@ zDN|;|@*wY5$cv*&5eq~O;{=1!aMB6H{7fc`@qQx=rz|zohyD zG%fotfQ_yM;RUNIg2B7&oV`8K`-M(pFk`thy^0|mnY~1-*_D%;6P1_DtVHl4lh3>8 zlDP{iXI^4u^4!YleWn3k=PZCAm!JgDGS-e=0T*qX9m zzIcWGVq{f7Mm(d)cO4XwpiC{W`DE1Vg+f>lWmt9czJao}ZU? zgiZTeAmg%Ss;nmfe5eJy47$!q&etJo|G$F_PccqmYYqs~I!s#0w=;Q#ey_CT6?33t zI9CdsoyNY-Q2Jw!+S`L0`$6l(+}iGa+c`uVz3J2DKx4+;HhZ&bn7Z-VFy4g>vMf*;vzx>nyQz|oN zsYU0`M{TFF-G<}sFdSl(Pbc+~Nh|s1U*>iEL3qypU6A2dBGOFB*mPcoTW#8v`PfR5 zmh2wyq`p9FlbETD^L3KYORY0(_6P0_+A-O_Pt2#6m`Ss3Yc^AflRD1kTf8){>XD?G zrRfRpn7Qhe0}OM&#ltL3cl+lILl$hutAkcQ{~tk>TcL2?yY30zHwW)`2k#wvPZxpm z?t{!W?65M8tKDTRA;6;s)}Lxz&$4q6qxU^B0V+6|1Y_8)o8z=TFTyi0?zJ#(KCl-? z$8bzuPh`Jrr}e`g4C-yL?KrG0c(38TcYSHs)9Glfe3?<~zTqYpxCMz)EK`-=c6+wC z>0y5LVkZ@dAa;YlfUaRMG(!|JECU=E8Iof zr0WBXlPVh!5VYsMt9g2Vt@qZ(y+_}6f1^+B=F_t-&H(zU|6K1~zu9O%iKF8gj)Q13 zdlY&T*T}fubMh5mv0W0O`Ad=x-+xrSNn2N}k^_cU<9=R9F@V4(t zR2@gS(JOS=x7}dwSsZcv>Oj3*W(tBp_EH)(4IAA3fDSu{kk_8`=ghsss6+HBk*~#7rUN?hhjqN z?vFO*U)d-Bl#*fsUeLPL{^N%L6Bqnv$M*O)_Q~|iVHW6bmE-Pwdh2`M>X{tPJwqRI zG)HKEXznqKS|NLr=_BlT57h|GiOVE>tBqTj+L&TVsFZQ5tP9w){#;T(x)0K;LHa>D z;IW05aUAdXrfu`zAIe9>?LnJ&mj{SY<3c)&emD9(c#I}K>)+L<*yn>{t0~siDIQT{ z$tS+}j@8dnrywzPn68$g4cTIc|Fd9SBXx?<%i|c?DX}y+iN(A-4HJ6zR6PQ)Xr^qW zw>mcZg_;hsOdg+!f1$uR* zTz$=>PO1xdt{#?z-d3Nd+GQiNxY?j@Y(*TOr)UZ zZ)!pF?`oc$_hs*IyPnFyXAmQ=aj=hTk%_}iyk-?)4?R=1*ng9gKPp!9+~rTxkmIt% zoiU58&u+{gxb=lxLn&Fa8ah1LK}Gu-`KtE1bWzDtM)T{QUqm?M&tNHg(w5I*CF{6p`6&=$Vtpq;S zp(os$)t4QJopX%d)t}J><~e=TdJLbg7ag-EHo83?X{hj`l@>oi`xlKd-F&!bSp^6> zxh_8MQ%+l2TM->wi@b++J;%|c;h9(|9KCCYv%Djm^E6>;rUY0@H5Qy>9C9i_V*t_h zo{oF#dzNYb0Ax3L(nrW;g{?N+xSxsDte$sZCU!swIjGhfI<`H1_@KGGA*R~zey>0N zg8isb;EB=DW>kBE)M9}z|H%t0+4Yp`6T44Bp(g(mTNYFoBxa{CEcf1Y zxqspWy!Dq}MT@0#;P$Tzn5@Fmv+NEbtfn)8k8BPO^2uB0b#`sYr`Nht??R3dUBLz4 zS8!6ZuEK;o4e{lsIq-Sdkbei{^>w<sxA;$?(B9%5M@(Um_SgMZ`Q zEZwwA(wBY$e<%(dXC_yD5fu2Z!HdlO!%RD?zVJi*y6NBB0e;+jQWLUV>?L;>y%%9kX4g2Eow4XWEw2-wU-VuP&*r(f z3KXPo83!qNIgVqP`FDN#+U&tf6@+cN}{t#m_f>H7j32&m(nZFsd-6rWm$T0Iq$r6^R@XaZu)wI zF!pFl{8#X}a?@$G#(z$~nLRs`dewgxY1y%?fzV%e_|^2h>%jnjnGp>|20x_+Klfl= z^mqL`_&ML;hxRVoCZ-pmGXc|axbm%@rV2Nml;lUN{;L5n;t3wQRw-B#JTWbTd*h?GRm9Tul?J63(k*ZGKKSh8-=EyZxxl;a znA~I(Jh?nyXKo0Jrd#*WTs)96KeEr8Wn+$}8>cYSPmZSR$8a1a(!&u}{2K98Tg@#= z9b7rWTe4$lN45yhSC2zB=orEI#2!2#SGyV^{F@U;Nz48nodqM0GouE0aMR^}=l2*A zHaf;|g0mjS-<8_va;|?CPEgruT@A|FJbu=isHgmJY1mXuMb~Ss7@t11YBHCEpmaA; zQkw)ZJ+-Q?j-_i$)AP&HwIegfty3zcQE)juw|xERbzCQUJ(@Mf=tNblp0n|>%$3}K zX4PN3oyM9#I-|IU4Iih@$g*hq=5El^Kws|S3As4SpN>3-r&Gk8{)C$zj;9=ln>g&V zQ+iQt;>#R?xau=w+qFYoW$wEyi^P_e=?H9u8Sd&gl&va`x|7UuNz1bs_IjEhZhif# z5$H`{UFNJfm8HY#$Wk6PtDCngL;(lWN7cONv`Ti;!x(p-a<>S2(i$H0E=D{DuBqT} z^|XfM+EVf~MQiG(IyZD75gBOpfaD?E0zS?fD0ejD=Co~!+%i>s z$3aHI0R{Jmn$f!Is~RseMA_MZrqfP}1GlVU86kF=On-4NTdkha{ute8-j+RzETMRu z)kg!Sag!O)hRn^vE-Q=7NHb=5!TVdWMbtdgTpsN-ZKi<**#;otCff$Hrj$@HApgAP z|7~|4`7FbRM2&RfKJ*(Y0Fy8e_zP>g9K0PCj{A;@dlpcZ@G9svZQ9rDrFZ3(l0wMX&kPq3# z{BY2pu@lKN1-X?Ou}p~ZmM#;qWtLhowM-?De*P!J>IgXASpJ7^MOSJv@Nep0rKeR|)d)9xqh2Cb&++(IZ|G}Rl_(S*u z;b)~vSp58}%#(3+?!7Q*>Om?Sl3Mbn7%!w78CjYu-Sa&*Vh6w|0x>|Ex(2!pPtzr6h&Eibk5srx3 z!!wG~VrFpHTd#?ltzB|*R5^iifb~xz{L{eGpe){f?o{Zw)8CsPt@+t) zd^ViqT=Nwgp@XNtXZ~jPyt$nyGTCEn%Tf%s*}fw~-c-NdPW6XIJ5Bw-(tg{o0MFx9 z8l0y~{sMg;q%AzPZJAA>zXrnMr(_kD_O~yl?#&gq$pujJg&uhHg6%v zu}C9+Gb3W^Bba=8yF^%6s`;TXv+N<65x4IYLJqozM|5Qk>$&iA_8UKn6!e=PjeSHa z`omYz5M%!l#n!C8{0KKDbM;}Yj*O~kFwFKD$sxh}dH1+A+ zFmsNPzz?^)^x(|oea2_Z#hcKi?vdm=Y{V2Uv+OdT)qiTB@CP2kZMM(%->K+8jl9 zJ)AW@gX%3-i~awCX7gqsj5jg?EYSDYKvFN zmLP&T+~t%Q^tH@sb1MuS@1ZBR%!W+2k8;l~ zT7awRYy5wr*~TZ>T045jyB90QcZb}a#sQ3m<>=BHD^jG8mKpKv+lGF(@rbVUwccK$ zZG7XyJ1{?5g>?7py$n4R=b3Bw)T`b(5U-eoz!w{~h(W!JIBi=~9b2AQl0aU;RYqHnos79!Xnt!woV4^3)s*ZmYyNHelxk=BDT&R#w>ojRmLi@ngIp$lXknwG z)5Zz;z)GGePgiOl673)|)6%B*?e7=#doKa?Pme5Z>S?Ii(EM=rTv#%+FHu;IuqFPY zW=SQ3t_IW(i%Nqiy$XHl%jcWnsA<#mFc-~mxBp|dE5lhq`ya`*80EhA9j!{Ri4>qm zILjv`w9?;3?`Sm!`$}T|6)v4zLhklRO~=(;S(*B*J=}W>sEU&~%HPC%VW#^(n6E9u zx0zFWYgiVBjA}>^$Fs9!?^{I$e)S}_1^NzN6&=og9Wd!r67KYKsyXq@TCS|XU#Row zC`*;uYQ7FKUs(G5X4l~KIRf0}S#R>_Gk-rTxy_BIe=fPndX#Hdp}NM_mz)$^$OZ20 z4ZH5IGSn$?P6QB64oLrs?woK)ar05p^z|a7`t*c25x_FVCvaLZI(h@4w;G&D&qTrM zl(9WycP8I0b5g~E*Gf3GE3l5VgEj2J5a$?E$JYNns2;w7M-iW5uB=(-{O znAL7roguvDE$C)ij`)9>%NT3%@fgeD+l0~d;f()D+co};h?{l5ltO1Py6Wt+?0*__ z7eiOa?r*reUUNr3#2yvXWv1*&s;HoEd{{O$ZU2Fxsd zvJ*r!`Sas|>xI|+Pi6b)8*fn8Ao|9@_Se7peaf%+DCL9o{*OWs!voQZ2=SZy0~)0L z-w6vd@w0l5__6*4gZa$vuQa*o+ePLq;L?B6I$s1OAC{IYD)BqhZf9rRI0%eKH7{g* z){j7b5{O5V!2Z$1?;C$Fe5KO2Avv9ET1i(@v9tK>;3uwcm+;eRTigv0?eE${)KJMx zFDW}HpR`NFoAhHpbAokuek!PAh5+IbdKT~afTL^`h~1pjESn*%Qt1g(#_A|+5w=r8 zbhJucp@C_^PfwWK=iAr#wlk^emt#H=p&*?O?bx4yq830(QR4*WAM&c?iPL&J_;J$@ z2w&-2r6@?OnscChWEF|b>y;UCbB}StW zU)g5Jdi(2Y%d6DrzkCBM!<9cM=7yVKrMLJ>-jkWe{UL7!s~J12pUn)39F%&_xE2 z@oKd5nVR-H0?M(%Vu~Ikgb<<5+rgT0bNAcM=Qr?gwK-^SytS&0GuDab?>LiEYktT4 zHOJ#``7AS#M&lK`^hrsFNiWgp-oQ5u5W2kMKhBRic&f6GX<;!`3e&! zGO6Cd=OC;6=^5`O?fsH^OY3SKG?kESO8i$ZBIM5!X@#=d+^0YO8q$D>Dx-YX=gQ42 zG4>Empr@dZl>Bt7+P|chR`Iq8cLLsA`}Pa_t%)~(0?r>|y?@b+JF&bpIkC1l&<`?6 z3$jk|-q<1t$pBsxrFaYA6&iR+!85Wtq}1fh+V{Fv=JfYo`sy;n_`D?czrSe~d`Ao2 zxeU8)hE>YYYBTI*9KbqfeQ4~D8H@n)*&7V0ExD^7PC@eqn}nWbvK#DYe`>QYqpdRh z*@_Cb6$MzP2m@d}zYerDr>I%$^#SCgm9J)d=cE?{F+GxfJH%ux-B`&EkI`gZ_Az>z z%JD*wwUnip(T~FOL)$8`Vi1zS^`5+HhE8N7I>+`*%FL)OYUp^Wq#^Q`t_o`}SToJ_ z78~17a(!vM=EcOgSh}u^xO57#<1FW@@-0P?&UD?#%~ZAsGi4m`{4XUf&U<$jR1pqI7eZv{EY2X|7nn+nc|-*-DeQF z@3?IO2mWm5@V<6ZkCKPP@6VLxy!Z=1=U1VVsw16WC0wm;eqA+}FyT5X1;#*s!7Ba9 zjwOKsN?$xVebp5IO;FK)m|F2e@0nRIwRIA|f@#p(u z8pBYk6J3XVola83F+LM>$jGE>b9Rz3d$2e&Gvel#B^(Z#_^M{8dD6M+JZ7k0fQViJ zF#|zJ-n-#je+FA)eNYpwuQMeJa1*tdr)z^?zTU24QW6Y?B|14W0z&vNk1bfw%uHT2 zmzllZB2M461^cXjll60M{S7V5;tdXWwdkwGl#Y0c^g3(J5hD9@I4}@1O0Ce(>?O+O z?dZ8>C8H+B%KjRugTVv>h0Z&a9kU%Q0%G0IBt_BgD!%c*NSTp@ir9AARO{T_xyt;e zX}bdl=hc9B+RQ|)T0L&2X}eK#t$i!Y?w~gHj|FHYbpTFq%{-s2AVKnHY)^KcvW4;- zC6c(1Bk6EBUyOM6MKgBWctlsu*4Qnx zQ$T~nRxCXe2g-}%X}e|WEw-y*<01vK&H<-R>qaU=XCc5NqZO@Lhi{$luYq*}Q5Ld{ zlX^fo>&B$dJTY3c_VSWw%~O|+3FtRCg8Pyo^bs6JD9{2!QN46cv!8(VawVN>UI9I^ zn%A5qf8z%_tt4mqv})5ExEkuXovLa!JFN%ublT3IQFEh+%4sF^nfRU@Pw>l4-&m=K zp>cjdEaOpsZ{sH;!#j^!J$l9KyUL#_xsl0!ecd;O<*`ud;%C4;58pnzdHBoBVI0w3 z_A0{xF=c_C?+VAMRh$9KuGnfwr1K?_$U72!Gtll$D8|0%DY5AJIh>x49{l*`VMfj# zVZohm!To?obR}wLfj>gvwi>Pr_1Pg7)Y*Wd_=zh1jAb|meKLbS#qT*eH-_1-m>zJT z71K|Rep`KC0*tYo_dT2`%8ZzcdTRrn)qYzy?_|DN5g7H>WlgBEwzKDEzpKXPw40mh zJDBK1!qJ>xaxN#^Ky&KhriaXv?P&1V^>4jJHrOIJQN&NEz~QEYW>N_lJC=4!qauUN zj3H9j@HZY5W%V^UHW)_<+XBcBg>HlktQeTBL=E~h;A0|7+A~7n?}O3zBXE#2PU;0U zAyabm^M*Pi>+7b8LPGk;l$61c{mA43mMfZBrwDvNkGaXN+J7w&#Wj4kQdq09>~Xy2 zcPRTMkv1M=VP*cnp^V_ zCsxTBuW4_7Eu2BQDS&E1iQAf06Rc2$Eg<58>{}!aD4*=z#KwG$F+OpG;jn%&L$U9N zrt;>$lXY%U^E3Xbgh4<8Z2`J8iB30(k6*`q3X$V_Q>&U-#!S=Wfo89X<=2ImpS%@`%I(e3|GVbBOf_oed`JLc&tDA$zw7>tTidex>zCgfXUpWtE%DYZD3A2%ZmN$o-*8t^;zx1>oQMGN zJ599-Pd1k(9U7hJwAIed6xSx(OKVm;trtNGI$6-Dv!irkhu{2^_N?%D-r-+sYIIVr zX0R0t$z(_c$!!i~`KOZAdq4TAQ``Q!x%jhbX6)o?bLU+d=JQAO0{dD3>^=GhY8nq| zJ|WB&#nHom|1Y?nt?EV3myKi^u^ue>KmRI7dD*Zm-GJfd+mD`57_2s~RGyUp&z#lM z!u1kMw$P!>Ir@FstlE~I;>14(St(y_%QpykOa-r|AX{VV^-V!T&mc)Bs3)2^U@^hY zdXj!2r|oq_Vxp7!jQP$E(GEXK+p~x94x25NJ*C!J@els}eP*oYvF3wjo_w1uDcEPo zLbCq79yCT9$}-u~sL#+Sr>#X-wF0i&p^vQ0zPV6-pAr{ zIOCH&nm>K!|K9zbaPChVONRuA+<5Htj}pZ6U0dvCexsS(O@HmBlXSrGForr%hKFDR zlEUPqG=&=O3`|7fZ=(ujN`CZ&ka!^;4}bb!w7m;_RMoZkpUDG)f+t#1(W;F#*hJ8R zm6izB3`}rFCWsXkELD5)ratPUG7+r`36n|Yco>Mq3RbIDd%aqptrdbV62K&=C=W&O ziB#nbK^xIRKqUX~TKmi+NPF-7e?Gr_KACgQe($x{T6^ua*Iv6$%IeU`pFHv^rR%F5 zy<8#_1$S%m=ym4nYNULmfE&%%auXMqFQ=gGG>qo##!luZ!yKY1^IpV}2F9ze4rlJW zLMf30bvQB3=*Sd0^KG3%8{U&SuTAE>f zu|Ya_ujmQrqa+|50)&jCZk{CyZWj2YOjy-+mAE2mC;M`v66ui)iGp=v3)Iml>Kgg$ z&|P8kCQHzX8YZ&72~!=ShKa)k`JbKFK8i1qtN7Z)0*9}s%-426clgM$IBMDvMM~83LoAlpzKjB?cTrXe4pr zwHl{^PPEL#iEVxT#3EUykmM#w61{nd^hXkOG~P&^@)tQ=rFPLmr0i)8l-9!6m&uR& z>P2YjTjUimtA@;O8@b;7nBYv_4F6pNd4MXP@o@d`v9~I#g6#4$N#8O_SMopr8cgEk zHPA|*(;&^w=i%66 zT{*zAq;;ot(n^1uTZFcB+}@qm)RjA}X)E||+ZnKiOKhve>Dee1a;V=c zN0)04cZxzz$`+m>sRaKk%d+=-v-V#vx5}}fw#u0c0#-S;zWm~hHl#`|$IsmQ>mp&> zhk*t_(3-!M>L+pqGY}gUK@g??MT2JY5>Aw!Cm#h9_~<%AKmvT)cUr^UwvSo0emdZ5 zYx#I?pjp{3D^6fL;3YI-_BH#gh8Tro^qg-k9}|qW=eKQ>x|fg7jr@fyJ?=fP`*I{N zX2|)Jy?>`)2Edxy!OL`N%hbf)=x?)X>v4bKWj$!NK8=Xo3<6nY0+lj_N|{2X45)yH zmm6gp`=o+Tn*^WOh#Du2w3eTzy_1$-(fWG;cEx)6ZFBp#ZMTNzh>mQ@dhT;te%@Za z94lDyialXp?aHp(W%kU%kM#J|?*J!rtn$B=R_gQl(#bp-qK48-&C5L9<0a&d(mE4@ z2X*uEr_%e)%VVWanU}wnwwf1?v+=UiI=n#-OgaT8-I*_+^GeI$n!r5fCtf7e5|QVI zpraPXk&-Wka^kWwi@Js6LO5q%aCi9~^q6#wzOobzUQ4TBj7TT9Ul%R-%iO zu$2*T@{K{Fn4)Kd!U9{)a$OsNw`=6JptIFF@>}esLS%tjeFJD(ZW3?9YYRL`lfr_?U z|095f{4&X;8SHd==7moea)8Bpa$Whl;EdJI;Q2N;PDQ)&{fY71-S(B7xQ?6`u;26B zE0ZECn*NBd)VGP!bxu;8s|3nl^0#OWE={uCREwy=F*U43aWmsnXYdo$&~;BoL4;s| z5wL4etQ8)G-@&r!Pk1lS3HHFb z*aY}kZ_h43dpGChP(^FlHbvQ5ROB?g-HW|JO65`B%G|vRL6>#KJ8#i<(NwrMz3B;! zs@+?u3!Xi_7nY=iY7?B+{}x{%ITM3^#lzpypN_h_*}P8X3l53BUC6{=tnrorf@(&) z>q#UlmeENcDM@#{NjFT>6-qfzN;zU^kePo|_RCr4pA0{#slS z4>2)9k-@z?L=^mNXx(|Cdxk;3}D19{dKw19az zHV{Ks{T2g2w+T0c$~zFtN%j!lOa=;w45{BM{>f#Xm}3Q2*!{Xz8UCS7;q#dczEr%a z!!w?Tzhw=%-3}}XlVfC@oBbE0XH*RDz0)N^Rcg`m21gC8m{>ro$=E7hLNltNDmQFz zQ^N8`ZLbV z@Nd{!Ghx7#bM`~GzQ~_~6)Pk6g)7#~d0Xi7_nMwh+}cP{$-?NK9xGN0F+XL z|G>b7%hz~zLRE&vz)@^XUi>$~by2&!CF}Onwd~$tggnC3Tx!ZbMavctyMMigvX2v_ z=p%3S!4HENYeKd`jA?=x&NCwz*=jjzC3|(D8I$_r$4}tAiXIcv=rJ4g$bXzlJq+1h zEg15Q!H_=)7hX1mNHC=Nf5s01o8ZSPp8qp`fF28QE)RPAm!QY}f*$V(dfaX3NAcqY zDayl-S->lWAD{bsFEDI5WSiF7+FFF){|kN`Cinq*EZ8UL@u{FkF|~jmhsof89{tQ9 z%~_}DF_(wGz2FvZ7YqRM{Nt&Y{R%VQ+6yt!=QQj`wS&9HX6EOh?}K3Z`;n8_V+$ec zh^>CI_jjV^U@nP#C<4wdZp;OmDO-qC*HYh%@sY3V82^mE_*;Bi3n555#KmUvN z{a3Mos!#ha$h2?FH`-U;w|$$agUNgA|E_sAzNXE4o>ux>W(x}TljbeR#=k82Br-AR zOyJ1&By3YW9oGch4KRbNste2DUxuXhpSzdn^B_mBmwfPbX8(838m&I8)qhby^-Wh$ zy_rw`1$@NP^#J(%KODacO$+Y^PX3lVW&A$I-tXUy-^btmM*IHXjbF>F3c!7|(%&*) z#&3c&Psi_o^R3vtt6tp5_47*WpeCG3gvHO$=@22D8pojWGGihn+#@$-t9(Dk7s8ml zG&pAbkg#)ek+mR9qH23>m<_-Z4!}e1z2}vL#aLU;>PWd^d!t`{$Az7zCX+fm?5XSI z;nc}QR81a8Xa2>scRBhAwi1(^sok)xhRuOfLR>m+&EG;Cn+xI6Q>yJx%={6sSJ#X` zVc@J#VuDX?39aR;yUH^3z>;|IS;y~{-8!*bk>k@WBI>`Yr-sPDU`6|!_o83rg{?_k zVcs1s-+~?iAwx`GUM6{U#V6MMyGTkK=*RP=b@D#Fw2aCdc$H3l(K1J#<$n)GznT-o zmKt#>H_YB<;v>QVV0B`u&mSKWN{nL`xe5_o6j+lI15XIsTdK>q&`)WStliJrzhQ5< zqSGHAoKxGSe4{#%|DEc@Wy2A}Hu>!})rl#&`>QLyyd{pini7u4m2slrtGwAIiSe^3 zM=sxBjg;$;SMDEgEzh5|p@&zl+F8kE^MR9kF#d zf=-=|ksSU}vjuHV5;l}Wh1LS552oq%q?{hZN>0<-O}ehL_k<-^lMJpKK2?oW8)OL> zb{1(mN7IFeEs_*TS$%^`)m%*~hr%-LG1z#J_S9?1J299Lb>OX(oXQk-)KQLyQsH6h zC?~m^JtBiPh>oScnzK$A_{%ErMD>wr&>z1yAXqYh=7cM{Yd>ib$0#091La%%8}jU$mjdMEt)y6^nV?D3}Pdk@A68@3tJ zUO{lR{aN!kXW)`FEg!$9>lkNnqaojMr1%E;zBK29Z1Qz8n6%!fgcNja*)#YwLysotRoGFd_Hf&E(@26?%Jty(2 zp@w>2_o(-ux7-HhmWabCL%rWs>IJITU#Qjfs8xX&D0lrEV1`-L`cI|S1gZZe zwa$G>sV&CC-y%-a-6A!ZfLcE=^mwUBaiymCp``fiQmD1f#Evtu7i#PnVhy#vLJ~u* zFOse~BfkWVX9+X&zOG9=h;pCe9I9gx{e!ypXJ-1lAtn&kM7 zU^Ojr==sc1h7~&tgcU==9+zcmt^HwA5SR1#(Utk&T3#sO&uiOWn%nfTZ zSrsX>1ZAUNz@5TMBfjwPx9q3MZqp@z8H*zHC#m7flBQRi^zUo>eljc#HpJ7N61-D*Cr-qko%fid?oz8hDZjsGlIU zU<34fMgxUX3lC2lx0Y9tCK^Ujvo&9sxNd2Sy&=ju>~CX#<`tC_!=+j`tKmBYd{gsg z!n0Im=Hy?ty3A@AMAj^w999uuQEWypSEDU2KC7KY)b*`dE5LOBGieW@d%*8Il6FFN zTBC6rUt_dxc>`9|?-g0dYWOj=Tl1y)BU|hD=JAXiY0U@PYzO8`T!Xyp2y$Z%K>048 zyyaOjWlcS~dazjaYXUU2#F9lM;K2+Odkh)VZ)y-txKT_dNC)Lj8e+x1AaS)w2>WEL z+dj;7U&kO71$5A!fcduIQwjxT*=giSs>-K?l!J5P|h1za^(<0w5TK95HF30)aX zJJm|vz96@6o7)#^FLZNhoIvYs39P^Q@>)EZf5AKZ9_ql?j>;-m@S2euN_~pRkC6fx z{fbm0za@~LU=%i8BMm$WkFNk2X(hxD?{YGnRqMrI9G$N)&z_uj|| z`Kj7}w~ma}AjcQ7d+iMcz4!;)MgZ)OJZNUFz)eSF>hoC;bFajbgPK1h!pJJ59n2VdWoFfQF>YY#d%70te47Kcj-wtIcGvC^2o!iOh>fiiGwv;>BUTn+CTf55Jzc|p^fYwfxb;|F#=h>?V%CC2ZT7H9PH!-MkuG_kSuGC;LAyER@B8#T++0`r_! z@Q_!;pqx644KD}M?id4>Zuhpw)glDQP8)TvrYkBiIROe+wvk>{ZGOc-DcyZ6%z z9@6*Wt;u64O8K?hg(VVT?siYlDsPfko_U(`j`qr%n^oQgUU{Z{olFPW^5#uugk<-2 z_Rw<@r3_LtZsY?$&v7ouw=QaR#s0I#&i}3q4|XuMTNPLJG=9pSit$l9oe^TEBNjTC zqSjPFA0t~SY9#;XVh>X^=x?-y4}YO`(Jt$v^>kc_;Mo5nn40)}o6j>$|FNF2roJN4 z^R@lcMtR|zQsIpzoIKNtf6IGKz&b^&ZN8FBzc!I1o>p+HzE9n0;-+@bv_OtQ+n5WK z46eT}p39(psUbIGY_)*)VOX8BU3#R#r@6h-YC4NFGUR2p&0UB!T z?A=8dBDbJQE9<&fY(-4q+;kw;A7yPO@alA6v!TD(>e_+AzEa}{zY@R|42RoGjZ?Hn z_!ZCO56%bo^e^qNC5s+qYJ$>ECFOzicp_mnhMH!63=s}ZK z{W{-%6JxEi9#Ci0#bl&UpIc3LFiTd+6!a)B0#C>jvMn0*GgBY$!&}dIfXF$>I-}lv zj>&SyrY~T``R`-PV{mHLxmtwC{}hoj1yjQ_Y{#a&pN}iRQB(0fN zT+N&h^e`KoUU0m=drZhH>V=0*QQ8eHPE1)^$*S28%gVlWxrfs-oo3dz*Bv;c8EZa% zr<7i*GliU06`MY5zDq|vbI4H(wYZ`)zM=~3_{PaxSNy)z$IGDiyqAJ`BPBpq{~>hbY5)+O{2*6j6nvX}?nH zu9NYr|Hn>*nYP|si5Brj5&0YDe6SV3!r)(Ll!)p15c8WV&Nwc6kg~wLpD$xYQQvd_ znRp`_oD|J;mHo0Gn=4ilv$3dJF+P!hNWkt`*At$x2~)u7@AoVJAljQVXH(=#zm1vI z+D!U6Ye_S~S{{DCUsbu-ot@PB#W<^I;QPW<2eJjnv-mWgn5qFy&&+fx;3w(%s8aA_gd&261+p43MvR;UP=i0AzlARtJm~t7 z$1jVp;W2nPTrfRQTIPLW-g+Lodo#9-Y>hpBf8@-7)6ZD=h@D#fmR=y&<_@eG`n6S4 zkb7EAzb3$N{!zcOH$g+cRl-Q)!QJsr1H0`AJaQZok%+JPaJJ|F9R< z=>C=!1LV>z+!mhFZbfDBU;l~JD3*(K394j|)a6<~DzxGfPY*7W{y?$xqp0{81NQ>+ zoc0EN1H+~b9jxKg2ASt{>3KmBprJ;YC5s>9eW!Kt+k8u&4g52sPG7+{v*yK{d8eF< zrL6Z6#dZ;n-QnQXh-67bvSBv(W zOXVEoQ2x9W(ypMkrRZ3BcFph0k3D%2y|gDUZkYW8r{_EG{D6oq`K-+Bw?r=5-6I2Lw-cJj|3tZt=VyhH^MIc<_#FgW zrI4cHInN8RyaOE986oG`T0$5ehHL5u5Cft3l(%PohXe%^HD=nNG5Wk1PJHppU57UV zzd>uCRoW|%Czl<#qcQx?aIdyc4jZu3cmVJkpWXh9JnjKRxU7MR(vNdK-NL(^0Hi}~ zga^6<;7S4z`>cKV$H@rfbuz4q?`5F+9(H#(xS#G6B)<@}!8$bhx{SNsU1=@ZWi7!# z^`wpbgN{W**TAQwE9N;Bl$`pmgrC98C*a{9lq?!F%6wy~KJD-PAA7R-E;i5UA4-~X zzyP`?DP!nM3Yv>|koG0hBX0o{T(m<_-9vLXh2Dbq zirJ$5Nv%Kr1!|il$b0_>{B7%tzbn4{-{bFzY5bK@a?XJs(n##8n-xJ|b{ta(d;tDV zK5+6)KQWGO-V53bfj=tj$c3Do6!}41?+tYOohS=L9UQ`Y(&3+>r%i?1ZSDv1 z3HR@F^+Czcl0SZ)qXEX>1U=gPj3UarJn$dN6z}$*kS?aHsqcKAmgh=>o_7V$i6Tbg zW1`)(#Cdd{{5}`w7d`ZYbv&)6WfHb<6TkJyP3#n$9I!v!ux-Fw;}TPbGVAS0T-k$t z=!QMfulon$g>z=f9&3jlSC-@?4){I}Cn|j#wk6K*sefG*;PzMcx(#1(^e;YSc2VN| zZu=_|h0qLO7qvjfxhCl8(n*xO9?RJ|el<&e!qS}Tn!SZ=yw zlOPy7sm3fkx}CH(aEWJ^On!$^Td#Ebz)*~aQC{fZ?#GBEo;f-Lqgm^5UNtN2Z&%x|R@q%R;LON#Hn#^Z`AOTB!T}xr z#94&_vd$XEt$Ri4LyP5*VdfjW0T`ps;oIfT&J8UtjD=i zMu+}%hT1;N5Bb&wE8e!6UQw=eTlbmZK*eTG%#!s(D->kaAi?&%=FUHH~iR-Mt2$OM&mriAN^`zz&dAh zz}~!JEAZ21B!1c(!t-F;R+wz~a11wqQVlbt)mRQ>fZr8`Y%Q~q{GWiCy4O@Btpzsk z)zFRI$>H|&_zlLOyD~F?TLbajS=&Gpw&kGy@-^J7A#O)~WcEfNG-Ct)7p=LU(Zp(d zP4Z5rB&Iy%qmaESZp6bN#)~lTJIaGYfU$x>G z6&nlf*$)cSO+Ly_e2PBf`K5Y5YLzc}B(%$5Oz^dBD+E7s6=jN&Z&G@CJ{JcUl~wk8 zpjy~5*q1z1<~z?G45XFeVaeXI_6MLuVsS~4v~;sOw?w&w#0Cqtd{+WF976j0B}BZw zHi}(1b=&OlE&0iSxBQ6<3!{4rt@(=xSAE~J*h_Ed!kaB zq{w0XuL!&qxhdmJEo#vDJp3&5R*KFv(IC_j?pbWCf;JJ->iDNJ7(4)plXAa%DwICgXakA|g7|$)bNAh^ zMU_jn_Mb{02J%{D7CwcYc^XdXp#D>&z)&!QUpoCe!s{!x&*=`%c+-AD<^cFn*P)z8 zk~!f@K}e6CGwL2Y|48E|5!bg(w0FM|Or|s9hCC9m$-5Yk%IQDC$ja)`>FmFr7s}hOOccq|{d`8ObGd}-9ehG4G)cs@( ziLLNTZqpRo-G(lvi?rBM{0*^1)_eb>=rSoIx=4B>Rro93xaFTA-)kwEc`R#WRUi{^6sPyuhkzT$Xws)rXJ3Y}wl|RO6$duhrTWXes>?eA zSR;@1q?hAYZ0M;GTM!z&UfN(ajG;ab!O6PVYUt+I6Cb$IK{3&X1L)0GQxdKoPSlGK z6GB32+{`!L7K8Q}t7#4Ip^6@>aTPC=d{&{gIMgy9XrU3iT(|A$N}sUoXqd_-I3o3*Nwu@uql+zH?oPBxtPFAlAKvB9SckSQ=$5Uy&LUK|>jr zV4gOVnIa%u_63zmPGCSn_Sea)d8Qx%7-s#q4oNf62-_S&AjtuvQu{f0zf8(V6=aNofeCb?VW5Dyt>Z?B~4Q@-4K_xWP2;!V;TqyvMJ%d*CtoX465KJ@T`1-MU} z+>1qr`@J7IX$VdqrbV^D^N%?vIL@GGndGi85>YTe>ZlKEf2N zhIjZK7oU=Ih&S2#)g6I^9O{L@*|`cBgmjCddwZd_P+_nG6v9-eoqNP`iloF6J~ofHoyuC75-r3PGx>al- z`RiyHk$D}GdL7r%ko{hi6<(P2o|Ag-7*{EU;Tf;?u8v%JJ;?sVLFK&;0kxxd=c3QT z7bV{4$t9pd1eH=j1U(@-1@2``YzE$ z-fm-@{FLYN@%K!G%Zg4l%A&L5zyhT2NWHi z39k&wx_xp!eT}}*BMq|}&gILANh_V- zZQ>XF3pjs}_6MBDMeYbV&v*hyr4y6BGF5Md`{M5|*1#uf3%|XZ+dTzLEQg3r)R|X~ zMwr^e&N2~Xf=)tUAgivRwctbvK`Ni$E-wkJgE;Iw0x@TYS-^5DCUf#H!DRfUS0&D4 zR#pup)9f4e#U$1?T=PXNYUNQ`;8sC zrPht7m#+vU=1Q!D2HB@xaW+{4PM#lI|M#q=SLFxr88C)hr|`>7Q>!?`t7d}D;R-G) zGrs<5&v3T9eck>I9|scG_4o&T8jx#LKi{y|AKl;IA3xGs@F|()UQZgkqbl(WpXBi| zi`hT)*YDd87Xq;+;(18Se;T47Twu&)BFDW+KJM2X?&IdG;RCG&n~AcPgiD7j&T#m0 z!xlLkEiGgW0$guy#V!O-ngRRAK?eZV*xs-Z%~6obfc-liP5ZxOcmuW>R9gp?v@&WI ze)xvlFDMe+g4vZFt0PqAnWuQ#FUY8e?G_nAZ3YN?IV7lesif|g2N2x>R%+3XT!94V z!_MkW?g!aD`7OpRrqH<>j8RFVhv#=S`QZ+3-Fg zi5*Rx97Z#PED@dgLKN=jv`xmVqfy!*e|<)~evNSVZ;bfMq>~ZXoSv}ZUna~3NnyC~ z8SE|SaHTS!Bow#Mfw6?hWitP ze}t1r!M*Ey{HfM_CQ#pR@bAZSrfEw+8z|`ea!THZo;g}q(BW7641L#yn!led_T?f8Rstn)tU z*flZ`N7JX|?Z`bkUmS#AMsvYVeoFWzx~T1#E$+?~}16<;B|Gi7-X? zN>ZAMynA3uijW!FYS==vobv`|&*!rFk(tsv>ZIlJXE!(V%WC)*{BYAF&rjYdVsnt* zqngaE7<_qt^1g?eI$xU*`grKZ6_AjxL_xb^YHG)-P%rU}cAB`CO%0x(yd5U)pnmdl zOiJ0mazFZG3dFMKE1OHg)P-bH`%$kdWQzX+rn+~|_uxy?^wyHT95DZku8y^;=aDz9 z`Rkzp1Sw2tR`}Y-(K#maFRGn~MpHjq8X@OJ;VgJ+ah?#04ej2?;>(IXOEx*l%H7Yq zH&vH!lUbpx>pE-6Sw3sYg}JZ`ZYo@IVLtcY5|*dmn9cJe4o$Op-d}Bg(_BA z^N!Y!3k$+Nq)yV@a$LSU4V_1@qZMN4=ATb4D98$; z>Rv!>`HdcP_sCZEF4FJ|+3TZQ&kVKg?N=qXQR~Jf zPWzp}m0J+{`BAQSeM^kfEA#|FRXk62Ihc7s^B=KJj$Tj6iJ&jKC6AG>ebZm~!>;$L z3cuC0DP4Y5;h`buxvSmduaax5^n{BX@ww0;Fk(0NQ(scb3RUcwb9A-6g#*+qb=^x2 z@i8J}PYjoToa`^rMw-mHAn9kuyo87Qz&vlv)i@@-SH#HSyGcjRc|^udj*=~tF_m5% z=M~9P{qO%c3nRRbz@D%%XX(VVFgaZtfj4CUo=i|O?f-oKS>Z7S%b|h zdiCgyd|693wnwky1$D*>M4+H`*1Di?;pKz`<&d%_@)(wpk2$|_x3a|jJUHG}2=Vo2 zOQq{^6Cd4ytAmtBja{0w_(;~{?)NxNZFm}eNb5IYUs>tfP5QT3Z@N2g`=8U_Y0@v2 z^eg@s>1#~-3nl$;51Rg)`?ca;aiePR(7eih4^CC(!}+xrJX~0N?ZZV@OoYpaORShk zCl6Ozu@J=eaGkm0Zr3VKX)PC;b<~TvP-DYJzN-|6IgYlrV zoH>#5k>XdlgCcr=ujPlGhLw0f$br<{`$$+hT2s!#MeWXIhmghn(5s`wYB)wHGco8D zvT7X&fLL~K+sIwY=CNhGxBs!H8z~l&1gnK9X0ILjNgI|*@jTY(j zRNQ-)8J3wO$r{zzNz&T%V5aS*D0DS?F#7QWGWuI)P>TB&b_U63L?UWV*|)IlkODAB z*$DZ_{2c8$!fHyGb{!|}nvp*@=v&ddwY{Dr6*=4!mlLm_&YK^X>$v8O-~MwxSOm(P zZ7r$yzV`B^?k3!kY}Db`dkC9t_Rg9%w*dAKOpJ{>*N%3JHO{;H5?!BbpEWujidta;(|!6p02?c3{M1 zMboP^FMhk=W;L$$N48cw`G~v?ZGw_w(!fQlJCZUXc=Lmo|0I(idrPkbL8HDU2%e=& z*b8vAy#*w+njo%`5nm&if*1)AJSnTZa&-5KX}a%FT*T$s0Qt$*>oT z>dQS5u@u=-?%&7=B*!aW6h9yd3QU6E_DQhGlu$1TK8k4xa_q9t{NmYT2A#hMI|qMc zqan5gsB-BBAs%;UerCl?!>zd@LNFU!F`snOIn*sb!`#`1N|5iopwqlb-ej26f1wlK zqTk32ukqqUr&I2j=%xHx4L_j}-0q(33|>KwpsiC!{f+osDXl6ljT-CjRb>a=s|-QoOD0 z#z#3H^o>OTgJC{F@0{dQd^Vr$3~WP36SN)aWTX zT>{NZbu3vyXj*>F04}*&!sp*FDbJ8T&cRy7OwbkWHJD=?$yUD zmy)*B*iXy+Z!O)0=XH?@g5}*o-_xdRT8t8VatF0g*0)SqU;a+YS|DW|FJ%E^^p3L| zN%8qYt!=BOXqFVcCGa&l^+oIk6Z@3L&X?E^B~}MJYyLO#3%52%+Z2E8jggb+m$cAY zk`w17g1-B-bv4mPB_ZoS)iu>LyI&#qGFYE+yj+W@70)6Un98r$%HNdAFQf9VhijTW z`#-r*_6O?Tiu>3?T#Ns~gDKR*Pxs@^IXTVvB$b?ENB*zm zBa?X>t2_6vWJ%RsmY#1i@(Vjf)Lm__vNu`{BC}gdqXHqkbyajjS^{8hCAH3Kx0bqg z2R`LOz8&sBM%POi^gSwR%6n?c_cN_X-biH)U|KHb8c|ljfZ;SRv4sCOkbn1fMT#B< z01-rl!|lhRTJ@@qrOy|8LXQmABPPpl=$pT#K(Z_)OR`$nLe_o8ToTL10%sM%c2!Bh zt}b)SFkR3~#@W|Azl0+wFpcUV?&|%XP-2Y0C}g3R*_zv5bslc^85xK9~USn5@I zdZ6^=+B+IrBR7xS)iurIcf?gmbCyggJsH^yzm=PPJ;BBCJMzlufRu8jmSQzr4g9^- zY-Ra61m91tJpF0uO>jnUykX36a?CtVPmgSNf2i4N?@Nx7aZBUxv&z_j$9Wu8Hw?ye zE^OB42duX*52o&*dYugsnL?OjT&Xd`m$@Wvp~T4jICGzrmkyPgNh`0yvgOZddV^oF zWe|ofe;qpC$Q#LoCF(0gdNxK7g5Kf8Qs!hHx0Ft@b%J9t41gzs-Ey-Fmx^3g8s-KB zDZ)^YwIp|JZ#+U4xT4fn}Qm`ET*h2YChRKLMhgm!JE^3ttn+psi zN|c8|Uz^-16dg*ku1-9zh>Wbb$I;FJo4eoBK3NUo14H^XS$osSQjf9XWDzPTk7%vf z1q`-a&@wss7(=-%#E-jv4+*6|M-! z@GSsW7XUgn6+nWE)_@&WnCaTqd+1g`ZCnjBu~2KX8cr9Od(E_B+h9YPj!rTiZDRT4 zKJXhl+DUZSS>WLgPL^c=O59JpvL7K@;VuIqJ;}8i$Iv8y8gr)6DjQE$>_LV`@au8DLI$taX5$s*OUo>28Dl~j(lWbQ5+zG0 zIZNKw@wH;0AW8z68z}z-Da?QgQy{m$!Km0L%=yU}KNf%QoS)_1eab$@h|u2!a# zGy}RYUzy}TR0dHzP?Gm2dGch927%IJ`JFx)*3VO<{R$j*H{M8weNdhfm&{tFy9_RF zBTyl&F@}w$7NAl?-E#(?2YEBL)$n_IY$m41$(zBXKWOnOlKGRV{S2vns?zcafYJL~egZ1Gd)cc`;_pW8fr3rSm|nG0AoeQ;Mct=D5+TB6m!rhuH%9}G&co+sr-lk!XQvq-a+tPNDGxMiDRl8+M# zuH!-3YAA=Rrx+t^wDwBF76b81J+2ATt_mkk!$pTeF@#@x>grwel(6K)`2)Oge@i7* z^)8YnnsB$+37{J)RpFEq;(t0tjLZEP-O6e7S^i@R5;9b6*!F!gEy1nQJ2f(kq=|HYmW+w0`wwuoAOrRXWOkzLx ztfi1-p#&&a5+$$cQ*VW-_pj2dHMP|H1>DQSYbz$KEYpSmw6)Luq>Xn^4)UxvAlcK`XgA>T4el>$f0WFVB<&{|t0!YVQ|Q)B#g8QdCn zmP=RyQj1T#otD&8u+_?(qdiD9b+miGSLgDyI#w;60XCdoX|g}4s)BFnS*$#9?Ce{*%^*B@VD=H@@;l9=r4)QLTwheNcGfTo7(xL_ToY$?VY=x;v9xi7wDAII zV_NdK+C=aAEzyTd^pA;Vj0Gt~?C_=VxZyWMBrog3Gdr6UnU_iCH?Eidb7WM9!(IV} zwQkS%$LmDxnK&Dh#%9rt*6s1#FraQPS1~uzOfIRHOaB_@@;(-+=r=r*SM$RyT>%f&&}7dPvB3=)Uo1V7$({CK3Pj$Ob92+dex69W#IHD%tRt~^h_il zhi0q_ItFCPKQnWC6N#ix<;$K(7B?y$-j2ZIhPgKB+&Zyn=|h9X5!_ zhIVkw9j{4wRs$LxoQupJ1|FJ#?-4L^b=P5MkGZ4WgcK3NAS1K2`72s)`Q-nAfuF;< zzJY;bXjbh%(l}V=c6TWbBD{cutkzzHv<(iXFc9pES1IzvtNMdL(axfH6}u9Q&ES6V zDFt95X5G=AqS{XpV2(N{0{$m$Iop2hlWw{*q42Q-v2Ny-Sr{iBPqu+^y7}L5m|z^7 zY+Rv1)~=2WR*g4k^DZ)p`xf@T$*;xQBF$Les8@`5L84nE`hB83wl)@)cQou&7?`-~ zgn=E(XM1!QAGyh1Ie4EgsL7yKL<+iA3i=%dW#k2Kzbcs4)4b*;OZOvwTtruLYFTu1 ze|zMLy60q%DhF4rX#>v{rUQ2)_q)4R2~!kYgvAQ7^Uz7OJu2mhdN(MRSu5rKAp2J7 z+Mxd+zrSS@LZZ8feSfW}c9D1c=pm7Qtk(L~HhBfKM@4wxBACyuCC^Dc){;l19(UfS z3KpphHXr)~jRfHwNfH?Sy2%E*zD;;4-s_9k6SGnRvQivUCX!0rqlFHEv3@dgNAIbAYY)R?6$$wK!QE4YD6uGvA9=z^WQBKzq z_NObYB`=ZYV}m8HNg7t`gm&;O^LnX(ID#x5Ad)+&*{mBh4+8(Fi$}Xy}VtcxA5# zg}nGE{ zAc;)>X^(6-n(`L&cChj!)>$YsdazG-fWL{Fe2}OHdQAo=DtuJC&%UIw535_Ym_Ab2 zE4AY3VDxX4pguGNg`nzAU?vPEoM0aBr*9M5G#R35OO>rZKZv~>iYckltJtpZrWC%0 zXdCNY^HpNLdi2YAO1@Bn6}Z3pL=rm!OcU@k6VRFtINJntrUNQWz}j>`nF-jG4mi>T zY)J?7GXXNAnOgq&u~yri4*19f^rQnen1CDrXR@p?0fp&+zYtLOoC2zroj7Mmzf{si zCMgSIFK?p>Sp4l&K&=FzL%mv`pL1=ktn%fLk;CXOx$0(dIZz2~=1Yuw8Why^d-S6k zow09AjfeVU7MByRIE{DEMCK`5Uv~dxEv0e_=$N_}wXGZtbQ~>n3&hmkD6*_qEA#?- z9Cf3j$BMbaZ*P#wzhA(91J?lrke|}`!{Abg%O;OK3r>L6!4qv8n=w04ivBqnd6~5n z-81U>O=8_beotSCjB^C_w%6T3dh{p{%d?|Sau?B@#JLf4mKC0cE9W=T6qU9sV$|j^WV}vEU+6&MXQej)oS<>G#|M-6n(x_75^dUu~OOG zs_}DBPZC+NyC~Vuv0T|Lz^k{_a35L3Mj%9x3?v#JJqx zVhYqf9#kZGQeJ%FABc=c@8y>Z>$r}R+r6cYiOB`Q8SC2{z9k=g_2(A&aqSIx@_A-( zaaLS3Dj@MCf2Ffk9jO^#g@;Ug0uThJwm{;TN`L)V=ps4Z^o#+Pth3S(QBc5gD65d} znPv%?#wP-y!gy3*KfY#K&M1rNK1Yp`2UnrfATu2)fp4_=Oa(#;5 z`x66?kR2BUxxCGNY@6x7YRO$Y_*o&CKC(Bc9AhyL?-?$;A@{Nzr7gW6t>Tm9=_K;*C4`N>3#cL z>1uup7?=~kO-8#pI#)r=e$QP_nz$MtM9%`HUK>$L{m~quRKM(;-ilF&Ntc`>YF_pS zv^_y*uHl!hk&RlZ^2 zt+n?PKj9$phUd4|))9YVR=nz4WmSd8Ac#9-^RnYA)k{w9u$zu(2uK%?b`gcv;EvdJ#Z~6^JnfxH5LGu<$lr1!l<3;;AF!`4 z^XtL#ubtxMFA{r#zxv!c2j={@^^1LiJ1MD-BA5J-+Y{u^cWvFAEqKRj!l zWxwgS-}1y^t3m7t>z-@om(|KJO2*jtpVc!y!^;3CMhohm&l_Rl0z7t2I2;X_?C=Df zhc45cI_pP{uc>(Sw|rX-<5A{&!i*LBkkM+7YLd$MqcSIP!^jaewx$hOPc9LWLaQ;> zT0v)UUci1@!uFyObl7eZohdgbAY0grM)U4m5V4yoC2G-FiCQ}0 z`WiK>8$fp65EM4aj!2W}mh#%01Z;%ADEmu3+PF*t2){=iK4kT4OiK>>~ET&%SS{TMXcxCIObU zbdiWO?M;FLzV;^RrjHKsaGHco*iEA)GxtpKA$Hz*i*A%R`X}M`q9BjtpJ5;FK(rZ2 zv1O?d*F*|xtDy&(rY8DzuKG>eezns1P!<*bma~a*d-lqBNac*jE5Ia;l>JR$Y%zhd zNws8cT;UY7*Kq*_SZis5+LIDh`@8xJed3i=cAyg6($zOjh|>;=;6pmUpauf0k4%!2j;?Y;9`=`8rAFbj4xiC8FqfI)y_HOi(& zFww})ADrp3(ld46ziW_L&#|X*W^d#~wX4|Up0ZiSqIP>yG|MUvhGtWf9!=w+|Ps-|y)cUZOUMgSsy0M#{ zA~~tXVXUq85KU5^`*+x?2)^Cg`hvf`j;!A#G~%O=B0bBWrk66-iU^%3I8IbScGD*F zbsaMSUt7%A1Ln&$UlGb9u3NvFR08*IH2bqx@hmE?TW(YjOBC;|*jFSMZIs+vShu`~ zU%LB8dIFX{%!4lx!=XDFlwfrE5E%?T*c81=(d^4vf@b#!n%$1E97!tENiH=>_Gpqn zNRn$v!u-^fO-Fny!F4nhk`p@18J8IN5)aO_e3&OB7O)rO5ViYr#KtE(?M{2aK3eME z-3{ffP7Kzxc2hn{(4^Xnig@vnXdq9!X|VjZxpJXfFxCo)qzlGM!C53p2r7|>Z>^(Q z`7TR+ON;m(!NX~iHY5U*F>f`^gK7zJPfC|8J+~UR(9vKbI3!?l1noj(9*GLstE=o4 zX#dYnOj(cB_vAunkyPNfH=L80esmr;5=pXi5`*6k+mnkTKL|MYNk`$)BU^EU9L`%* zLVT5PbJ!l-rh5H~)>)tUF;<$C2)7k-JSG%y76}|Ahaaa|dD@kLZ(X&Gu?uTZ%(u63 zuiwbk)siEXNcwj`q63(n44QDoj;1ha<*&U-(8Xt1AU>U~C)e6dK_a6oa(OpA6%}+& zuf1rpG-*8pW;cl=M}y@qYfz<#_xA`X$n55GqB3VCAE10^(p2YyDTzQK`3=Lh7YLi) z{kipIn_>LPLL&$DT&}42gIYnwkl4)>A zG{;#Wqafzh_faok<8*I;lU_}8`Sfi^?Om}hU{$Svc}XT&$!jwy)oPR`)jg*~5_vG_ zJRx%*r=Uf%04}`8Z@`I3EhBrwiDx7@oOoPV26#|AsB0$2JjT2r@iQ;4mV2?b3!nKh zyRJn4J-L!5``*j|y?jl@n(M=1!*seV>BUof%A@HCV65Y5YNNo2L3RIr&*`U1Jv!S)7tpNMInQddlR zXvGRCJELjtyi&%e_(Q~5_pu95Veg=S-g;eyu;hCLq%bw75|Ai9?w2~U%Mo;O zB_ty|9D|4C2gFLFWoFM*^A{C|i=UNhs-&72$;|W*JJadEUHKkg!hm=PO8b)gNH_Lv zE7k!b)@eel*u??1r|Vh#ra{zEq=OEmB<4U|*%dIwwa=9)65Hb2#Z6Cox?V&IYRgUe-n#MbV1nF68H8wsdk!z|3<4MMD@(`ig{1KR?C;m8^V z!><$!VFANXv5q*K5g~RD9`n%0kJi|U65C&5kCfQ7w*L*4{)_*BIPaF74{$DLE8BWf zWtom9G>`hnZ0o%l#*dUD<7k{ZL0`K7als16RjEyN(dlFM zD`|uybiiRY;Tm#C!``f1qiDUs`#%96Q%jOFgB-DtA&|eW-)9Ev3BGl(n&icfi2ryU zF|oQY>pIeF56%k8q){@g*U)+{12i?dAlr88k`JhIL&RB5^6hnPk=aRH$&*LTwU<}CVDef8+*UM?Ll2i70` zg#zpk*9gEK1~1%YpOH6Fe5&#n77C2+W;b%Tal3pqDVE(2(|5o38Zog}IndM4NGQG% z{4ElL8=D_VoPAt-<5VJixG$iT_C}$y-1bI6zFdEcggvVyPw}G`d<|L(Tf4auHsnj~>4vgI(sN)PkU$sDB%y<(veHu#3S=bn>x=qw4%dMK0pXp?+B z*yo-|Qq+o%H8+oJ)f3F=^8xymg&%Sr7!Kj{*Y#WS%QE&aMz+@7ye_Li_-BpmwL)e!f&z zoNQ1ulwL|Sh7~fmh#SE&X&E~iEm|Obm5)~W;N4${?EaD!%kvU-YPjxyh_4aJBgxlF zFv`J@{aC3OURK+GD}9(}i0Yo=DQR0tBHu0Ew-hDct@6!%hVbT~Rn?$nNtv67*938s zpd^(*A|zuo;qLZJq2zb`coPx4rC-zN-R_leT8u}Q15|5CKjy`NpF=H)K?6mOz{^(s zhdHFKX^y(1$BvqHj5*W5xzoC}s|j3n%DrBkJ{k*y=whwvFB1L*I)Ljj71*#?abCGIGdva=Hi z`9y@AYl%HX2u^CB*QC|eR>KJdh%(nn7)JOdDfM#G5Re=qZIYKVd7&ZLLvkx_ zO%?DsmHiJ$p|3hDEnifL)0CGPD1Uvp6jo4}lYE}9Ond{bmc%B?#Md#G-IE=k0lrUx zpPZde%YY@ZZ|cP=&758E*I!mz)H??`bDAk4Aj=Z!KRcC&;&YOs-|k!gNvU{Qt|yQA zM*JZfFNGs9C-;F$>HICeIG}w&FwL~@USdbS<9~LTgghtX7F!LR?$FWXfQ02OyLCqPV zkkzn3koyc7=hgaFHQ9=tFGwM{E#3sgX|d)Jq)SZRh%X(kMipn;HPN1vte9j=C%&2B zXQf`cVQ`9@is?v@66H@BlJ{P>CRh8I6*bj+7c?r8$VqR3RjMDMgx}Weh}Q>D~v<@W(qNke8+u$^4Gn|qsiyVKZ>SxL?>To z-GIO5M8RFE7ApQd^HJE|L!QMHll+8e*0UquNxmxyQ~QI$!3D(b7hJa_A42i&CwwIH z80hA7{00fiCu^#~)Kn`q(as-B1?R!gWJq;Xtk{pqJ+RK;pg3yE%66icEl08)L$*-j z9!0uT8oweDcbsJ7QSA%UWGsAUK?>7H+Hrsvmrqq#3`*wKGdJj0w^;H6Zs zEhnYclDtMo_72l4Ih&H)tRaR+dSe}@`t(?TF@bt50aR)benDv>3ffZtKn2qsr8j~> zDKLc-VmJ<|$@~L~{X&fBNBbSYV)|T1X!5FWR=fF%tZHwOY8QVq(J|R=yHFCzsVD7R z-A6bbXC&;l}8T$>#U)U#}Z~I(=Quv6!0hvY8=Xe04rrxTT{PG_#C|Lj#ljXoO)q|>H7GV$uIj`#EU*Tt!zbNl54S@V;$R?pJxlKp0!js+7F z#47a^t0AAL!0Ffc#H96!HZ*+AbbT*`^!erf=AEUZ}y-v2Z+C&?W z-!Bl)#}8F2E`~d6KdW|@N?O#sNBI2FeVBLZaqqdM!UUrG5P^2l1m5s>VZ~nHJ=*K@ zKTlua-RD3^bsUYeVpY7c{_i*TR;#IkcP{k+4E}h(v2!?mM%3?C#mDVW9!FHxd^b$n zNnb*~MbazxHylcnjfam-oj$K8R!l4psW>vUzPC=Qo-Yzzdv1Loex)zkQHR);>wlgS za+1$M_RuSY!sW6hNkhSOm z6(%QBj-;8KN^|!&(ili3Pb4MoypzAzn%flxl85t=T7LBPE7hKh4at>0a!AK;5b1wj zkj7dd+iFQau+a8tTP2~SD(^7>0LxpB>g8eDKkC?q)(+B zDk(+K!;nGFs-^jb|NOLt7y8Kh5sU{!60-3wt)4fXve{uo*<{z@hMxq>zX88&hDyy3Hs|pxMgwQZo}O+u@n^d;X!M9mWiA z%!`@zY1ztV&;HGRP4BL82NA1E0o;%pceSU=&MphQ+G4lP7NX5lkjUbYMQgKr6|{0d zpl%;aEcAZ>{{SYQudu%evYRmt+G|4go5Df>!?`$MnH{!X>>p0d@r4sN(041ogh5K& z=nKx+%{|oCJTZj|RqVRur)Z<_W5#KEz{ttkknihI`L3|9*A*(Iw6MKv&XYWY_6tJc zLHil0RXZ@}4AX^_^2vXR!V}-5GBGfj??gkx5_c@xTDNhLup2ESY|8M`1)PM;2PFT( zBp)QnXPv3b^?T`mw5Kj|GyW?5i#96q>?Bu$<+)!dl z0Y|!A;Y#r!&hggPeu;5f*zPzd@vA|;Zea;k25=8YEAQmh{vbHx3-_Hn zVE`W(lw^GX1j2T&8tW*%WO8p+m0j_4a{9|RyAP62mW=i$Rko$(Kh~+@PUWEf*NA%o zIv}nS81RJ>NWMHhOdA?;zElsBDEK>Q%$HHe)aRszAwAJ}ZUl8~vix_b5Cg#_XfB$2N)(Q;sty^F*yDpV$*CfEv4Lkm&3rP#g<2x&&Z3 zed;nzRU)a>l=^rRP?ioTG66EpniRb)nx!xu@RSzv>C(aHZGbMFEkRdqFf zXOam-44$CGOVt`})I`yORZA2#0~45mLBU&5sil>sv|frh5w8%O1adkKqNr7?Ep4sE z+SWS>UN8Y6TvP(y0ACgHc7~|jlyD34{npy&%uE8>zW?v}Ki`)}nRCv*t-aRTYp=cb z+G}eZ2?qack&jNtqmmj6Nvb`A<$}CPURw*s_WGj3^qi|~e&zxlemwS)8|S8Z=&m`G zfrk!KP>bJ1)HuI5%eDCHRK;MZB~SMF;J8Y+_|? z%)_0f&F0I!YDMGA!=>xZmq$y55BT!WQlTIZ&#A?XhnGr)>XA%n>{?z!EcF}Yvl!a= z4VZA)j81FD`_#nP{P<@`*_O~%g})2=mZvu8`lRKbnmadyVN|MN)%dbNU_Ch{Bt|`{ z3PJQdB%%r8JhQ$ZWX+t5BXr^?yJbdWL0&>44IK5n{*o&c@@;R~$ocmufsmOURBt1& z@i;VO?spmVwq%ss!HY+L+t?0f=&_{}CHsUB4ctT)5kPe2n$og>RmL9COQp4Zu2IZ;m^7QVi3DYXzl4XZaC>m0K+I3i9aBt(rT<-FI{L{Q^Cy| z)}3?s7TcX?!m7n~`-!=O4-dhv2WddCM4Fk{Y|`L1kf3eDrSG9|*B;axNj4vBu80aBAY^i4d*Or8!rFV` zgMn;&VX=k}ZY!M-k?88>-*B}=B#%=IR1o&|lv0F6lcUJ(*fx6>{4v(mdUo8CksadHU@`5(!?H0bM$_&!bq&tM2n{YO%? zQ&&HupE9uXAKHSwE#4%vSeo&j3OZ%o`4hgyI_dDe((_I_94%lh$$c}z`4fYQU#3EN zE~oRge<*Kk=>+R1+qu)HN>42#1q1IM3v=qWmrVE0s`R{_N%0_T1>v00Gf50~aqA^}R6lcFt5xI(J zkLjPioBe%>NIy_+T+i9YHTTWixYjoG0Nm9#SZyBy6P_H7edR~g<(9YUaIu3YGg=s} z*8@03ih2ZMn|!#Jow|AQ>s%2$xyd>;zY3sUkO+p8U)aVayBBWGQwiC7Bo9^Gpsn|4 zH#-}Vom{HRwddTd%O%78+S-4Yp|9}SIFDbGBb4(z=9Qt?nB$UopAp$u=}~{*f!SE; z&*qGM#-}y&VZkKc=)#`u2WQ~%hN=uv#IYDHdN5+E127s~*1X>#D}sA)Zr42B$8IHK zw{ft4pG=uSj9ouySNg5HZh|iaFAP|NilhW9Gx|tZ`uT@(;XU(}(oSzp`X|Flu14Yp z=pM`-(Chu6b!yw>RtR?Q*gS4i7J_ki_GS5h{>mlT!#rdWtO92xLojPh{&>pBEy(Tn zoA$YA9FgmZTRQ00ci(qcC)YK2U_B2c# zGLj$<7#JAIyQXwZi1^^6e4Cj&?>Yqr8EJpcDk~T_!y$RFV#^?k;X}uB=(aWE-~(Y@ zt{Z>oiab6nwPyT`o`Z#%ya!$qG$<~t>2H%!1Q%C0^z>vl1)+pgGsCUsBDb39wfL2G zrvjwi>{c-h&BOpBbrfhFNv25w#q#Qyx&JzxkO+@zdx)RD4@%tBDMN4_v{xap_Hq;j zcRm$~)w`JwRaV(Y)%?@W|2van4C)RW(Gr8@>uG+dU&b~7!86tjaiE7Y)^j-+Q$Y7Z zbZ9;PG*YS{U1~_KHDeE%DaQ3-7w)GRQ(3UwkplH8>4r7)D4?&hKf?nlV1I$hv5+cz z#5TdSi+U(-R+tK*&kzU+eZIQP<f1B5$4w>1z(y8Www%bGFG4Jv=#48b5}O zSZ*AW^#t2~mm~CL2YszG#n=q%59do&{65j{t2nZ_I%Mv$k)?&L7Z5r}q3!WiRC{1B zs=c}I#;%uQ?SJ&x#av2~mUjr7z8P&JXmd^>Ti|7DCs#5BrUf2Da!{t6J;hI24-tk0 zwjqXy&Xs;*!EHv^4DDgfoGpVkFNzB5Ny7sJ_73|))D?Vc5rf1;<9@d0g6fte?JT4I z!V$2?vS9hDYOX2mS#6VJI77Qj@~ZN+Zfb~9!x6`sWUFy)`A#ntkcI7q6&!ZH{cj^-E=SPDmEqhh$9&w1|WG!Clm;XS}Z zjh#GJ0W(l!3%Ud0RFN)EU+M}v2~)>F`Wx?E1lmco%^W+A>mcQO+2PQG+bGz^59svijUb&7O_43;{8^!Ly7OnOZfO% zw$fEhK10E<{eeozKk^(g%x$!@uHsTQBD?qSTf}7*1K5bmbw(x1(xUvs7!Qa`hhB6O zmwr^TUe;2W{5$d1xv70@_BXTSRT7VjHry2RCHE zAojc55>sV=YNTxuwXo7yWTqkU9j6b7S~+_Ihs3B~CqY-#$|ZOrYG-`rirPDPK*b!G zC2o&=%@w!!qzud!xl7PIy2B`VNzOqN*l&W_la-q>SQRAShJft%oSOgTMJ`mTTv{{! zfn8Ie+VZIj)fYTuL1eG+CIIx6=O`>XrrnmDL^-MN5wAWo7_1o*uT3hP<5l>Ft`!bU zSBS>C7^dpC9{oJ|1^vKZYryK{;Z)$-Q#g6R-FmA?GWrqeUncKV-KQ4rl5u#n*S^~y zHee~GLtH1YmvSu9T)<4m!|LT3~_jjqk3*N*MEok~OSwuw!VdCtd zsI1UWq|M-qNCVd@^3RcK6)71lI*&1k+yxU4jU_nNWn{gZ5FIZUqvB5&` z#XMxGwZFhln^tQ%^{#3y47xcvn3D9nMru@)8pUwNb#9F}c{Se9wZ@|C8qdzu=p;|4 zq}Q2|@x&Y$0ZUJg=~D#Dp4X?B*`>qKdnkQsVvOS_z>{di{gYwF15kZP?k-T>&NL|f z+_1sz=leWl_4AgcS^fMQrA2+GpH6ZJCE-@u>y6($b&HMhl`Is_b*rA?Rec8!E+cu% zxg)*mJw_VrHeogHNd8J&_>vY*Gc6oTqO!e<(mc0?)O;^zz6J==cIhW+>^D3OSk1$u`bm1&mnXr}OCPydYUCjcOBZK1G}UcL#nl#~ zgGtFdypp$fE&09dl2zFyMbLHGf1CCN$WnW1t^Q)2AA#DmN|} zJA3R!hh*%aT-}9dxxBF3^YjS#=BmE4IEf{}DU5wT+_H%UM@)3w_>|CyMBnqQ#wXVE z7D@cImLJ)e;Acp}e;$TsTkounPRg852oBeAHVoEu`V$z*SRAFKSPBieSRCi@0o$Pq z?zC5>U)^kn2A+Cccg7TuIsONu6?1;zF*56xlDJci_zNZ!x!vIozQ%TR*1Qh*b9m0c zRA69wHUemvGfIN-nX>8U%;Nf3siKG~aF=-)GK)7rc-5xlPGqCnJ0Ritm{2{>^>f17 zy$Mw1jHWn6j-p6ry&qSM2-M4a%Bk9-S{Iw#yK2?1#$shPF1DWB5xS}sJ1@pw%qt=B zz1<=AE^+M>>w$NeQQWwj=baWZ~K$^898u*z@mllhHc5LRPa*;cVYhv+dx9aOKs zIRD~{soNSfFvcoNidA`>Skp$@o2;@8R@qv6N6g7bj}ImMi$SoWW}TQR&2+>A5)`;zDZ0SvQ3&(2h6$CBM$rV>~?!h?U;X0noeq*BW+;GBww!P8JPtdo3 zJG*c!$*mshD`aD@Sqv+oy)0+MiBv$r`Bq@TR0AwrAG^1H_0-mY?|+QZw;!NAE{fw# zVowz9aEua6tfL{hicDWaAxxx7ue%+)RuH9_Cz( zb;lGMQIY?5^HXYGxNIS6*^Peea!af2gFNH{=)x{I6mEBMSeV9P|8K*gjt8)9@RxMw z_r@a3|i1nqUMewX1l|9|4QZ9{~j02kN;!!7Z>55GlxpAAj~k49Wg{hRWf z@Y}d#Jfm-=2cy}ZN#ko39WeMhC5^A=kuu+fFJE_j;gnR^tKs|<&A*d{tQzXBN?gUk z;Wc{Hq+<;@lW`d)Y%%CiTwRdpS86W;Ny(>u{QJ>=!jJDi;b)it6Kn{lz|PX{*!g?% zJs1T2-{8Y)+{MMOu+3P8Tr7p@{VC*GECtit3cuPrN7~y)+Pm1l#6}B4bL9 zA((c^UbyuW>2Z0daL1w4k{HHuh0gNMKnGndJh&cX{P>K}Sw8^pIp{w!;r|ix<}`b! z$B!~zg#W7t`}!8hVBlK&y>dOeG&D*YdN1hv5<(|}=Lnr&PR_-o;>pX*c<4soEyABV z9u8%JYsN!|Oq|~_9{yYU%2wq6-{_m>{!z&UN}z`yv9t(gP>-J*taJ5CLEQ+ISzJR7 zIu9PH^Y(aMA9`9sJU)j`QtHTnmYPl}=eH*3S>$we1}}Re|2>oMO7f{v;S4sJdy^R^ z>M5MVU~lHXZB-29JNP(E`H8PfGaOZgp|Cw;4Lmad$Oq{lH7$FGdMXF!PctH%=2BqsUkS9YJMtlw#T z@6shc4&vi!T|30r(@(2xnBc2yxGA@?VPf9YN0YB3CbPinMjQHl*{d$ux)BKdeUGFB ztW(!?Aykt)#l3oCJ{auRY@PZcqqv8D*7=ux61HOPp}Cn)&GIf5c^3`K;24jhqJIcI z1qI#uu3V(_R6zGnQ~@*_4+5|u?Sih5ZWc)G)AXwX+9812lX5d(HnV|bPh$T_ZnR4N zU|+rlmHxrf-F^AMBn(v!@z}<2gPW4we-^j@MgM8!^hto+oul3FlaQm`nc7S8Po0~* zidJ~{SkvWUVa@%3uPi%MOs#3A&*J5wxf$Z!!uT-2yYpF^ezGy&jdz71_XEE&>LlO( z;5SLRz~4s(qQDQnMXm^JqN%cD4|ge~yorXD&0E*9Z1!+li-1%9A|H22DT7t{)>PSx z*!2HceFeTp(wJN#UR2pD(jPCEX2$rdeCxPI-F(%p#moITI}~aII8d}W1IBUGHF-44 zT~|uV4c!wEsm>r3sXsbTHk~;g6E06VUtf!H;(O$kK4E*Ez)q$O=P%WMX`g6Sd+Fyv zd+C=n>Adz58|_^Zt_505q>JIi={;o?6>BaahxD%?=vy1e>WA04E=T90hx(N`}muV!{~XO>(u%t+Vw70af#`xDEiyPjAU z9^OxX-DFtjNFuF&YlpLVhKjPpb#{mKyC<%*J8TmC`|Yqv>p_Pf;sAOYO0UQBPVX|+ zxU?OlAG4J%FqhF#_CwM$0}WHsnhIVWNH?#uBNP2R0V5D1V6w=|p_EdgEm~D}S5;f- zs(=B3Xe<4*NgAnel%&Ci<0?4{QQ2?{8p|Z1?vVgMXZJ5^_Ah1jFJQW}unxaF__xo{ zLeVr2l7EK!<-?Q$Yv$kfrE+?HbLB%(hPg!u82OOh{fubXzf{P^08DKJf@q+H2+BUa z}WME!=}nda|8hh~}GGM8E zoS$HPL^M7kq^D@A?FH-kG?D;P#99(pW$t%q7JJ~%a79bBP|ssXbYJ{yIgBzQQJ51w zD8#V?joiW|T{Z7Zp*4v;}?YxdqXA(#1VTHli>9ALKwUy4-y>*c$ zJBT>${`*Ig+Iu#c+^8b=K7sxqmbA3b^2|9vMc-a9HGNDMoqtnH@?|k7eK&pN&T@}F zp?Ln}pVOQjTM7lOIvVn*rHH9E{ST-GI*Vq9Wz(!zhGzSx*oQ)~b;A>dqn*os*M(|} zJ*vUqGizy_{;xk>I0^GJ zy$3=sxep>uuP)~|%y5ccjY&PEqiecxfHA)93+?F-2)gixFV6t_tb$VfwN(Ens!tzo zq6x;gi({u0BEZe}5^b>=);Fi0G`)C$>CBV-ubJz#vk7ozFGk& z9-Bxh8~7Ubh3^mppI_ihaghI8;JefQR`~8l(l9t~JWY_jNRT~wZW_KW`$w@aCRpV- z(^}=Xl~%HC#J0k;T?t?e*>7l&!J($AceSda$Wf;sRYA}yz%wCZFlaiT6Sz@^{t@Ju z-=DGL+&6=4^++D?+!+BINF)edlcdY?;4hK|yU7ZPXtWeW$X~1OD1b>si1;|o0emuD z3hVJU*StL-Y-3M<%DipVFfY^B$Q!c6{OmAkdMTYfUF12nG_%|%i+i}~FK_6Zd${T1 zmHMWKo9yZ4RMYevVX8!a2oNb(VBUtmu5X9STil#RvCR>cMEyo?7lO zY4Wi(_62>FUbgDl66v{f+EE}cgfnYv{;w93Dd(0Ut@)SnwD{M3hd9CMq~_F0g*X&D zXXvZ;b%|3ZFa8oqYjuv4m)s(82V3GCBrm=Kd3n|G@xtuGbuZDv5V}qor(K_?9q*Yv zEJ=@YnZp+DSC^NRyzF$|<%LKq(Sisma{g#!{U`GBk@K=<`%Y>CBQozP`J5ZJh?5Cmuh7ztho zOjcckphQ?vV$^T7iq7Z@>vHBgz2CFdI;nZ9EW7aTtF|t8M8WAd9TnXdI%gLR*L*NC zu|Q}fzCQUMFc_)j9QpO)uR2miFfjq6ZL424{F|K?4@nwy?eqOcu5%hZ1KIP+WFz^`gO(_awY!1=J+DqBj$uWhx)tf;n5eQmOz z&GuD%S;%UxZ&0(5hWc{qLQQMqQXW~;(;Fds%~P^%4ZsVzP)DjRoXNkJMP~XrW@zfh1>#&m?vs{=uUdv5IjVxY zx1-et5A}2E@z4UWu+_S91@KexGAdqr<4N9p8@Ag59NHFbS>UPMBk<%|()GPmAHoiQ&@#FrxMu)kL!h$sqh?Za0n*ULY42nyLg8Zy7Y{dSn zFl)$uLKv0ESi;~8@x%2;?`Kw4PYx1MBdB!#a0jyYZz8|aG5hA8A_BVjqf>EykimR- zz6OpeOZL!G-bFZ1n`|$T&H2W!)9I(w;~uPZf6}LuOR~<;$>_|QY< zOF}JQo#)~sLNLJxL#y`Ey(2wLh(h|^m^czF{Dd-Rtk$M)JGj80K=hgJ{V(m-e>S;C zRf7RUu))BWV8CiDsx~;l9Pu9>T}<5XVFC=a_EV1O4>W)SwW^B1rE089-^=2R3ztpA#hH6n@4|h z*tdO!_YOAZpRCvz4pIV5uM0L>{|GjYQho?p3l8M}AwFxth}`yGvp7FeWv?Olg*ERY zoZKC8bkDOEYz>w#Z#aZ+1m;+;UeI=2utmP)udcRz=h_ii_&0a=0h?Z!v7(&uqz6o#%BN`Z}3i4u)gRTZMJRRUQ-0= zri_Z!%v{;xpdw&92PS9d?w%DO}^W-&KIS{=gE>iJ_dG|_9E&hAmazJLTwNf z#BLqM`FVrBw8$R_{`#cFed?l79!fM;2MCdQsob=_SE2k<8p_i=DBJ%*Ccnvapk{g` zovF8%DLIj@nEKY1DTbD4)<34RZs0J9>GdehS_jlw_7ZnKxXH{1Z@MCY`9K__T2e9} zi1M1A4^$FV?7e*odWj}T#HPfhdm@RW$J27Sd`l>C%Vy;GUgSM@sy!R=aR(Ffo{A2^ zE6ugn1mpf#(C42fxX;_ep|mv4zA zMzP^R2M-8e)%WR$oN1o&{qqz4Lo(ytYCNRc*H@%QZlq#S&E~B4|M*A?SShAHlIdfm z@XO8| z$s-jXp~SFG1nGeya;*i(WyCkaZpt6h{y+=TV!g`OB2sy8uwg`J&^)IaM(hpxknVT} zHcwscL6)I!NPJk_DTBfzWClPMCobZwl!SW-#Wv-K@ac>s#=cm<__P)P0+#C*Yr){o zhT&`$H}gc3gF6HIF%@hWzBk}o7;LyOB?{0R={8k9X69?p;-Si?Os&ySY|6Nt=*VfQ zb0A#J@m6D1j@=_RqSCKOi;XBkiE`)34F2Ln$049J2(p)Ilu;uez^`4Z_?-uu15LK* zProOeOZx+!y#BRGpU6+3Nfw08WYRTOMs_>}y>bylhYRm}=mW7^$K*uMap5IQcvVjP zkgN+7&6JMTJjR6(zBKRyp|@WK{ePhFoucqPBJFn&i=}<82j4Q2-o_6%H%R)sl0Hq- zyV+;Ttj1sCsA7bn#MEiYs6*8)U*?4##M<_0xML5N7N_J!88cg0_@feG+j~uBN24uE za1mW8%eV^LJM@0BCf~tMT;k3X_=pMVH+8b-}MwKCxp=6+nPK|q%XK}=`kM_Bd7hv zbbIQLmK9%G=JTBPC)4SK0*{Egu|)+sN2_mO(9nD4gkV`PSCk=D3D+erm(j%hf2>mb zQl;ieLd^s2gWK-HMkV&{ZuA`3g`RIgPxZ>4$mzE)^PmBA_>whYKh<`_9i2kfaMU9! z+p>`L^$b}r@W?uWhX`}RBt#iu|ITE|b3XqUCy&cxAK@b$Y(pJu1Rj;7Gd`o!k*oSX zLu~XwYC}L{e*~;~6+^hAJK8`6mNOF$hllRtqNX8fobUV}~Q`;=ddO!OTvA~A?CgG9~5pHKXha(YP|`EbQ9 z=64jd64sAl-!k>`25Ds_O41mV4K&>fW}P$9E@b%BtLd>DWQ!=BT(Ez7vyRDVxo?h? zRryMZy&hKm5Q)CG={Z`U?l9s#* zl2p&i#G=f%6|Kd?l_itTabI_0+-|>{8X8RvqqKGjlj) zO<)5NC07uizcE~0jlknVtC=9YIyPTS4rW)(szcAu*&dLPYC{TYe(v-eB-9!LeVVQN z+|2_jNy`_hZM@W05S=GKMbRharzAQz1I%1Sc5xBFID57VB+2VN{&rRjGYzyqV&;?d zQG^#vsdeHI;A2Ng^d{a5YL3RteYVDfAKJgY$iSD#FXyOC$R5gqZ?+pdY#5hL zhbk6E{}Hk;_@*g${@+GM|hKc<7QXBQR zOMEu6%$Flh@;;OIefv9cpZ>1F?3U^8(QOP^i+j-5}p?-w#`>2(RwNz7A0 z&4IKoH;L2wD0;g_`jf~H<9;H&J%`>7q__Gx9&=1@E6MS>;>>&@vXw~)k?@8|kT2VZ z5Zbox*D~qEsXbA=P<(a>ja|1EP~}~lAyl?*z!L9HJ}V&kjX_4J*}v32B~wrsmPCHi z$Ynww7h1`m$p5|U_J1eDXM7vPM|Fp|QHE(e|MUz9$wzf;)&ZZke}Di^!^vfmHIbk6 z-shWl*(`TE^3{-T9XXRMUE(9A_uK!s>&IsW7&M84bkxY+y1|cXqR!$90o7e`Vv8^f z%O{Qkobs)q#LdKxar-07uP*CL>}dyPuP+N@RldU7?(53~SqSL*@>?FHnQyTt-h710 z-}(Fmnnr;vX9oNJ-(pYvFV>e2x|k5{T(|tioPt>R`9Q&eEIH|a??p#y-?NvTg)BLj zr9PT+q%1kz`NwKJu-aFcz1~c}XC>|bao;{y3ZvU>yR zRGn}Zd?dDto&k}E*Ya;(bQu5oMBw%QAF>D3$Aq=1$$po~4y-#!M1z(cwF~*^wqH}{ zHOUnzy5rKGW~@Qp>WkUks{5S0G@b*AjJ;9F zH~7b9lU6R-VhdXLDD9zR7;ugbIP(R$WQ6TF5{@wm`o+5?W9S4D?w66t&ZcCI$L1P= zHIW2yy(dAx#A8h+0YgQ8olXM!MMY3+51+u%IrDF3(6q%#8(i5ow!yZo1h=?Em~7@#!Uv_r@7Xu3$> zyiN@z_?p{|p*Qg;UD@A!K>It3wf)1j{f*LoPug#PNOx$m6tyEit%` ztE&4X%G{4S96zV`7kR`hz9yFdV++0r+R4m70He>?W(DMKlrcRdJ=ntCT&F zvQq9j%C#@So?>sMd8boe8<{`5tY4;mA*RJ3F{Re?8;J*)yx*jf6ho1q(V@hzncvoq zM1lGx$I zSbwQJO7U8&{vrA=aii3o{wfXZ;Mf;m2TAFd zc-GQC;X$A|*(6eg)HfL7kE6@wSoME3kGVXKF^_&8Pce@Y)PFGGYpuD_TWS8_N~`XW zo_w+zr%qy&7BUxvxwxsRFQ_qMpy7Q0PDKX|*q&vd5u32pxCE?iVt7i7Y3p_3acI<5NGD93T#s7S-W zw6kRTw(8#IV<0}fAht6%+Lt(f0F`^=fw*i$xhr%RY%a0Uxy6xIA{?KubWS*-lSQ;I z!n(WCs{bW3p`7cCQgJ2q=8TLFE(s;h*~vtr#ubU6cT*sKA)9JTwmlXdF|G3@T4W{4 z$g-x}ba`55c)EN!fze`3@1V(Poj1&oFIVzqTIYGJ@M;b*!PSpD7-XgOpG5J|q7~U| z!--o8oS&|f$VHzReR{x`fkd=4)!sV<-U1b0SkvDCxOh(>=fY(mi0$Y}6eN8h+=#@6 zQ(atacyfzF-JkTqZ`IAyhXbs--poL;9lfo(=Xgkr+Ai*$(>H=djfnY?KCn*tjIkTr z(TCL<(8qQhOyqjH6x&fq{P!5(t_d(^I6gxsQElGKIKm5zK014Y(9glX`~_p&d!bA!VhcDME-S$a0EQj`&xdg;xoj`M<=c^ zorqXfOPx2@2v2DWjSNO6>3kB2*Uurdy_xJGlYL~ou$j+u`5b1z5g1XWRIs$fnMoxT zvKN&zc?l6dWj5&Il~X+nR^4mWoeAPSZhoZ=7L6i!>1#MXNf_~0%op+q&rQEg(%;KYe?`;( z=%$aA^cSi7erP4Wr zm?@b7A0=C|7c1lHSyiU~6WsdWe~0?T8O5tVUE8><+CD!vyS5Xk4beNkbdo1Of;Pe= zIgjt6kDiUb({-v*uVv>!Y3nZ0^Af%H_T7J;8p$JpZajEgcyBq(kmD3dzmuML>C*_S zDPreCCYfoSMm)}ib*6R7PLoxCCqU_)4)u5N6x)?=)h{KhFva=mVblX`pDY@py;fpI zs!!EgnPzcJ^5)ydw`uhP#UHRA@Aa=3dbs*O8QkH=?GaxU;8iD+G9%PnrR2O$1~h>S z#uNV}@aCs-v)0Uy$To|qY^mf-6n_Frs_gZ^fi<#pD1H^=oO3Bw9lQN3-;F<9KzHniL{1Y&=Mo`tV)#@{z;eQw9 z*`2F-QKtK3F=UkU(HBf`4*h12Q2py70eguu$Dv-!&NOLNmL)rp!jZTTWP@g0>zqrH z=og}))s=8^g-Vu_rZs#&UBh{jje{t^LAvy^rhg9ZtIvtlT6GiYE_Vvmavu~#r|^8Q zaNl&{T(^y6GnN_Q-&ZWRfs6+7!JDRmY8vQa%{T)=vROcD05dGg(sCG+@ z0@G!{l$qbE;unmmiVwS(va6VU1qC;owg;i~ox#XV*D&9!!J-ClJX1bGd6cl?%iQu6 zZh4jj?+g2S5NN#uK`WLnuRQd7u~3vS=5JvWGd{mh71TP8d1RcVZf|D2a2=KL#L8f> zc|un`S{g_czfLAymalbQT;=tXR_K4C_e76}WXbK0f5`-1#qeuz_*A|=QTZ%1UP}GS zE0tmV2CwR+ihx=Qi$BY-TYzA(%Rht2ll+@@P}8YtxK|Tv54Zhu$>qu)w4V!5&^-BL zMDO_qz6-{``MCs%xsLYScmt^Z6KT#*oo1{<_`-<@0cj1HG7;^UO^T|U9lA-&iDFeo`n0T86$ zwTo1KXYAmY_Fn-|8FxM}>rtB3)gKbQZzf$~$?(r!6m9AMbq0{9>AwMFE35<{GHA32 zlEDRJ1x1qc#G0Gvz4kyixhS3dPq)Tvw4S>8W;h^bWIxWdvXpPGm}%>!Ad8q8Aq8br zkEU)NZ`XRYXW%{G)IN1mINn&s#8}NTx~3}rcl7|d>eY~MbEsm;4OfNjZ-8!60nXVc zy7D&||C1)5xHI_O+WE?LS-2DFwK=pC?~ zLr8D*1jY*Z-@0Ru^hdeiZJsDQ!Yw<1vJ61hws%V5=|d?@(U2s^HMA?(d}A;JH6#eG zd5*F^x9m5sVXs+8{UhUk?%OKqb0{}S>xNR_a7_iOc62T$w+C`Iq71S zZyQ-Du}&0Q#!b%Qhi0quF-oVc0dQPS@=H4E&8KdAmfPOHmXltX)!wwu7h|GlmqOy9 z3IE?HFFe~DZV>oxm;A-#2P^M+xIHS3mFXnw^8Ztc%Z!8+T7V~;y-ubY=l3KBD!!h) zF}av@VHMWnF94nJO5Lr9OPYGaG^OT*gQU6V$>6f{O+C`=ylt6F>BGKACtsFHe#;~e zOb#;iX{P40GRe=AoLt(j)Opx1)NPjT{gKb2S0tCpvF=3i)tRK2n}o`-DKC#joXK%& zCdbb+IbN3>6Ujkkqo^lFE~)=qY4$+#eJtPq?0!E%zCWw_aPdQiH0~@lH=kLmC&@Z= zzuc&pzX0jdZCn(3S$?FQ>YYztH4CH99UIA|(uk?ydtUPQ(#gw7)<))48pCtFI> ztxLY-UybNlkn6(UE1i6-BnMH{C_UXvJ}{k}E6K;3Kz)wvBDk64n1YU>$>%)Q$zby?sWZhmq`z;|q^oL=lFtsGv+lEV z_h)olBxJ90`jQ7o0y6$w_qt>gm%MxO%H+px$(bIh9nR;JrSr{VDJJu|^AEAqu|MgJ zi8RBTO_1bPvS!ZEr2Ww=sYYD^Bla843AWiQyAF97A5!$V*s-npZ$QNMR}1vKDTc5d zwngLqHnz@dMN(C?O*st>qGGF6-$7z1FLo23@jwr8qn*9bS$MvHxEUxayZE0M_77FG z+}0~pvE{b>P{pb#OSrqKy~*n@+iTJk7vFHfm%A@EJl=PGYW7poDBJd=4nNz!!K!Bs zKm!}yOf;ODjWLZ+3#HkLtX&1l1FZLS|n zMiiaJQJJz5y>I6y&?MGs=eX+>H_44%<}ba$Gt4olQ@YTXeW3r2zN(0Kr|*Wy|7H4q z^dIRPkBO;VNdTtSG6K4yFPqB!b)omj8yVychSIEmi){upq`pT7|39hF`SCS|)N&1B zrj7oz@%(qTF;LooNSs&AYG<7gDb3$5z2#OWp}(maT%xsZECmqmx9FZ<;P_(?=kP2^u9@*?drHCbdtyidfcYIbH*nel>Jl-}nhzJi-s zawYPwC%^L>&Dj37v7dYLYlZ!ev$;;V3Mn3YaXqxkiE{3KND(H8607b3-s5prvYdgo zH`~w3t->7yJ83>XmD-fDp1dd;n6_TT48CLbY#E@@AV*^-Fo5Nc$BFKvy?MauNIdqG zR)D~haQEuK5KgVH=CGuB;Veh37BolWMKo$<$dmO_p9n5n>umowm853NmOa3~q9DhX zmL$)YeGTvaxqKHOdQ~pMgFOXBR<^&DB@f!u{?+M-1G&nk#V1pn zRKme1XXT1CL#Rt{P&yia0K`GOUFa`x_ip5e^H?ThlIF7X?@a!KP5mp#&oyi%xU)LH z%_=5x5q;M6HvvC7KW0!Q*I|RA3(_dML{L;S)g=HC`{IRdk&2a*1SKcXi1?Jt1Qt@1 z1hHoC2PLyyesBLcO<%8n_n7{@2akIAc!m8XufQ{gUo-vNh>`?8o)DhCKP#i%MSi;e zRE#9Lh8qp;=QM0|Va1b)5mCQd+pM`egNd6ACa#CzuHbR%m#H+!g53ko ze1iC3wncupxhPAYNzXU^!51>&e`?K4b2@Viv-Ntxh-?Xp|8GXKXy!AvjQF69kwod2 zypRb)*dj9_S#{zpLmZFmYTxh??WTUARrfV{Ky~yamkfgY?>nas)mpy={YFu#{iIX; zQ!C!JW;{)`k-Wc(3V}KmF5eN37nVjUS|*1*G{$F(64P7u{KI*DOR0Da@A5~EaXd;@ z_H1PYW#07Zy5t51HS&|NH04}X=W*#Zs{W#ezrv2dvIyb~DMX0}RkVGW=G+ z0EkrS1*gWcM&SqI%vsTD)z<(MuAkTKi-6kKAW3um5Uk(3kcu8T>|M@iYz%t)bf)*` zDqk00L3^G|IkJ@-QV%sFOl^%zHO|Cv#u*K>J;l z*(2>&Blhdg2DWQN8e>slmQ}gUwIL7lMo6Cs!C?Xw%LCTX<(vUY1bd}AZ6$lej? z*k(PsDqt@Tl&`jzlL-uyZ?&`PAYs#HHhefxTe0}Ipm7u2#W)17zhafZHPA%!+@SM| zqw~v@QCXjsf^VY{r#=0V{)jBA>YMg`3q02E#Ev@sUA*QXFl6!G~UmbeMjS* z!T+n#I6#2PdqPHIsC-wb;u0>WI$FLNQ3<^1u^7s`LU{UNruCi+f1+5OUmW%>jF%XfH$( z8WZT)8XpoNa{%Tr3QN#lZVJFZJ}t1tEkI^_sVX{%3ktMN`$$!t*`lr*|7m(N!ILce z*L9v1<%#YXeMdP4ji)sxu(~3H@uTuW6VZTVJav&5US6xNFFj7ni^JHohGo0S3oo-P zFShFVQF(C%thir!F%wHGq09bDc`>f5yf_wPMlxc)JpeAySsvS)D|2*v3cb+PLE0B~ zlNTzsL}q=9ewP#v?6f@9v1oKXt8OJJut02CNpdgJQ1z{}q`us={ae}=`E!G``$ws& zi++$b-^HJv1u5)zJw?csJHNrUAabWp_|26&H(n;=JlZo<@m0vW;2R@2MjOHLGgxc~ zQli5nI1)q*s;SxH1`nCe-LDAo=7@~2owi4jw~l^z0^{E;*#g5W(q;b6lAm#|8U$#$ z2~gB`?zH#1Mo{G-YVci<8-T7r)O`|=D`N@lKAshi%!JMc#J@mm67-v4$NWUW|;#WKB}BWYU!tOQMHq zZ^{>@W*5PyB%f+OE6Lb&q15XPje)|yuH;`sN`14*Vbv#SOCfUg(X=@v@YBGRi)JC8 zRH|8Z$B|L+_z;%|(FBq8-Bnc!PpVShd_4E0chLeQ#yfTr!NFQ5z~oKAdt4JrM6PCz ziOwQ_S<*9OSUEr5kNIk&v8{wFxS(U40AZF)k@yqR>hQRKbLeChz5GaZWQdtsxc==^Tc{sHMvmy5X95Zc6mcZ?JI3(!eX_1CiJJB@x5_Jcf4);^(+m}@aJX0|0`4F;aX*xR9P%lCWdg7 zoy#4zgshM_D1};fakyOjP_MNGb29by%&PA&Q{OuXc;drJeTy&C`g(S+kAoyyUrkTf zh>N{vpxuV(x<2Y2%*%~(gyz+O?)e?7arC6>V8y~44@F2f2dyWki5d~)LLANG*>^}> zD#lTm`Yc0n0)OT>Q}Ep5jN+3SdIsZxs165lRfrbFM@KMj_iqk#tPNHypVTJ}!;unh zl>VX%6&dBpORD)4_76wHGGW&fk+YUg!_!z1IU|z-~j>G^1kI;GyB&IP|6z zGV7-~Kq_X5H7{h(YV9g)fS%;qf)p@`zGIPHC|kLTw*wH zJAF6y;G4hZYV=4n(U4GXDL0HH2Ir!UR4~yiCfA_RF;X zebag?KhB0G<;}(M>m%(CrR9TQvcF=I<`kK`UeP|wy+w(D^v7q-XotO|!>74lZX5_= z{ZZl&69CSWv1^U!yqv~Fe{!zZ29u)&D{1)_u$QuEK=rR8RBgvPSrBlAiMwnlNUs9y zr2|qOYw*M9l?dXBD70w>4|{1MVz2hdb4+7~JReKzMmZvoVLmByds5;xJ}YaP-JWQL zvvD5i6N)89`N;4D8C;FMjg;hHggTtC^;>nlfLz$>wB%ttIZsPLT4>pr*S^G)uj(tD zHGUZGjB&!)4r@!6P*wK3%$_p7>Q~!sQwRXf0Gs7Jffma_?WUX(Mj1vKXTWOn+(Gb^ z=9;xCJla>M+q;$gS?%e0WrWsv1dR--+hnR>gUb)FX;wNJumuSsM6QqwbYU(6b*+2k z*tZa1O0Gz*9HCYsa0u*oK}_+{Y_9k}qeSt7j!|1vQ!Nv02uukhQMCTQ#Bh!xYohLf?|{Z!mw|t=tJa} z*j(hNUh;SDn?IBooSJfay8h959FwB|8kWExYzU+pM(^QMpcD8Agc8`>FuF5@w6A${ z8~UkiBT)Y0OnI(#NtZ7$<#$N=otg4G<$V|Louqd*jNT>hyLsQk`<{l;yS4sjsh{uP ziC?e%|5Ny>|Nkw0{;&2Qg{*v=h}it&Pzvgog{i&yUuek=j3@qiWaEtGf@1>Eig4;K~$8bYZsF{RqK z5i(+F`&%;1M1C+t!{b#hsGy1-m6`32R?VpR9e$iG&!|mW=kYW?x~~5uVj|ig@gU~Q z3JhSZ`k(SJQZ)I`nO->(J5dtiPwU#^7#6p`4vi$H+=rc{fE zjy3N}B-|#S{XSj(IQD6CWo>7rRoBQO#G3vzMBu&FsymT)o|-9Nvmo}d6;2E$Ld*sh zgY&qa@j=?<092sh2o3R3@%Gd|W#~zJAzOh7*$SFfCk|rqX|kR~yiFEnFv`!!3asP# ze^Blyepm3zk*@yY5LG7g6G%T#K3b8b&XT8HRJmL2y0%n(r?T!#t6s!^VEaN`q5lQs zRlNX=Xdn{zB=&``s^Kz1?9Y1>-@&kNq2QxGE=*HSu1bt8O%c6xReR8WFPs>Agiqv+ zmO^Go*ph95j`xNo#*f{LClmIRy66nc_*V-cK5if-B#qD4)8(UQbfGczqE1a7A9&Uf8n1 zA86>4tR~sukI#Gy9;8@CtPWm{-$lkt6_}Q~2#jhU~j9+%K2wD~*T(x;k z>6rLsV}kL~V~MyHw1Tg5r5sHDPtx^awq!)@Rp?27hkO2_QU0G;RlhoVHQEfA9Pp)D zhzrrs^Hew7W-pEhh`)(;D7I#_L;2pZ&2A0aL@wszJCnwGE2ro$g6NSLqPJqocoJJ% zbH}z|!rv2~makk8@#JDwcHW6JP*j-{zbulJ^N^mtK&L{<5&EGPh-H0tnnJQw0*F=0 zO5w`^tEtJMEp4eP5y{6GE^S#)uB=McDd>RhhibpF%jB5ysL$&W02 zl3ZRHGPiZfZ1f{{{kwXy%}CLfh~k>ae?&^kDl*=O9;@qR9lUIV9Od~9Ay#^Bb zB`#1CGVOTr?(G%v@Wrw(z+Tc=VuM+A+XT7##6d{q40n^R8KpSCs(x8bamE077g<1y z1eXzR`7AzUl+b^Bnp<)WjqD}ZFJ-Zztij#{)!;uK7=sP+faK{6bK$Q6&1xY^&)@OUV>sJS{2kX`k(B%Vvh*EyJsFIL z$EXCb8CT1q6(SK32GRcU@L1l<(@TRN%7|{od4L|40D5|rx#)4`B#D1(7Mk98Fze0b zy3(v!q|45i_gzEIdwSnBq=<$tYsg-*hP3LR5^~F`@Z$f|RpEp$l~&%W@BkneYKWX0 zNfNS(PO|OjY?|w?3eS`hlEqyWUgo?-Qr4=lm<*Wb1vxK}k`zJit_lYVwPaP8S@|}8 zp>ljZKf?Xa@UIi z_Yjm*I8#*w=TE7O=gzgF2Mkyi+p+1!AK1MD@f_ZZ2CU|Na*xC)E4G1MxT4JZClRt@ zA8l@b+iNe-D&Y(?c0(G&e~Z;~qlHpWGWqsA?6a(rGrLPBx_C;Pqizk)0jW zMQ=V6JzMOgD~Q2{kA=8$0`|&?{b?xgaouu_-OjE@5%ifLQ!$!EeIb?V5dzAPQx?1B**539Xql{I1`!| zTdx(Ag&?0kX;O$g>}0F7z^faBkrmv^d6r4IitfFESmpUgwkxlG4TC!?F@fs_sD`uA zt#C{sx}z~ym`-*kpP+htKGsVs_Ok*&IB!sCsA5yt9#m@8eZhC}m;ppjiON(a@`F0= zIG7=m*){3niW)lGzqRHTx|%$iOx3gE;i6FMVjfe;Q~5{y3(JX-f@S?weoXvJh~T_6 z1bEEmcT&8|JbreOnsEpmp{0xc(%%pNwoiZe$-geC_<0Macb?Sz$@jAA*G_8WDWe~H z@q@BVq9OZjwc1~=HTB-ePoU{W5a%2N(1t;1R!A%tFC_ZnU`*mO#|eg8)9LHGrQajz z>ON63oCTM;Y2#Y`=-$CGPF~XHxWCYDtL~pl^*H)E>mSYTJ}N~}YD`6+hO?wK)3j`c zy(qv1nhK;~qOjFDftus9#RtUY=yV#UbfZd0D-3qJj-_*E0 zFpzc1t31WS5w;!cMHLcbl{delQpCgvZ^s1ybNyAQ<)b`j+_99=k90uCqWl$ukgRB1x5?qY`T%Gl#Cv~sy#h~>6b8~3*$oy zkrIROENO9i#n$^OmPSWm(n#cQXDyzgY!O<2M0`-Kzq$m)$nNU*nOxr|7xK5vN&ZD+ zAeA9a$p?TUmdl(;m-BfDn+L3i3Aa=C3_X=;ou%Xq9`V{M%88C+?^G}g+C_6`zW3Lh z!d|HC+|v#1{jcT3h%lz^;zo~y2P(}l`GuR~L^zzjcbEt%mW7#c|!46ibjE5wmyk$PVdj z%@MAbshQyELV7$HKs|??N(hvnq*LZF$x3uxN?6;fo2GxR>HCZPK)n+2LD}@D z&Q$xoUG`VK@x~%NBvTwxp%{L^7x^A~182)u`3uW_T|flJWz0^spLWKUF$3#HeZ*E5 zRWgfhO#Voiz@sv#%+xy4RK5zYMSsSAxp01X+Kv?0`ZVQ~FsEAQH*0uiQ5f$(N&Y*oK#@aW2A}$P7Ufjj5Wz#s znm(Nm#7y$|+^WBe4=Tee9BcZ86c+9#hqx0ozHL1@TLgMyP|?{hs!Wf`2@%DY@g~9c zqgY+*e6h#)qDcnh4{xi#369VQNYo5n3lOaDF|<1z z2CNoY!qM0+qk<{ZFs#>9qa*%J9`k<%V7fxsV8#Tjjn@_)Yi0*EH5-E_Lme4iA-2Sr zI_P6i&B*sI-1A#pzJ;#hCnLB>_SC5ginqBGXN@ItK`-@wkXyZqS%g%&5`f zy;abE4jydqW7zGaL?YdH(073hhAsF=8TNY4&jL;T;W7Zy^GoYOU}FBv?u~ZdFlF=u zWysr=V}qb0QJdoz9FQlBTL$C9Y0!~i)lVi9r)T1`&6bKDhj6a=6lJlWG?C`foDY?s zuVzBu5dQH$m$a28c}4N zc=zR=FZRnlV!D$R-9E@Q_BOSsi6d}&N55Ib4=%y#G2ARpz*KQ@H%H+86_BjkTj2Eu zIusQ#zq$6)O-9h_qIfOieSOg0km1t91!Re9qCwNm)QeX>o}>7QV$<2E^jiu8@mytp z}C!>RyB+!K?VdPJ}F7`1wypgepG^JDaelS?oMzUv_?qPv6SU z*D*d}=i&dEojq7Z{=V<&OMg;-Q>*?n#IGk$v-#O86pFtn>Phkg7<7LO+^Qo3e`or% znYy~M@B^c_enka%N({=VLS0uGXuc`gi?+T%4WqkIXU=ogTp5aV1Fn-^o-9AG_>r@%JD1(pq zZ1JXTU*N%$mC3BvJ-5&0&aoefO`vP0czh03AsrT(yg!$`E4$?-(uk(^4)GIc%99>n-5=b!E^Ewh-g+0u z0HGj*vUP^^SpGtZCu{j>55_g17*awz%3<15#K%eb&(`u*bEY{ePb1H)1sQtTx$ykSfCE8Kj>VNvy!!PdqS!mhvYvw(S-d+h z6u(P$(ip3AsF@n8sS!qf7U-Q3cf0h`8pPf?pS@l9_f>uZO)Dwke10l47@N(%nfu(Z zd5g_KyYVv!X86~q{QFx|Q;u|?NsK1WBh(a%&zN9Xt(H%`2@_)56*|~Y2*(Wd--+GIc#w{4^m=9Z;I{cticu^n?tJCf8u}xP%wVi zSP_wl;>QIIGB-FwXW@|w=9W;LvGW%-N*g0UrtnAaD%NhGlv7NBtV~(*Q-=%$iqd$k zG;V8e%^>1MI_nXwYYS=eJYyQ_B@O-at}YD;eU8xN-lhBmnjWMHXV@vwC&uLI_01)C zBL8($)hj{>?de#pPmSG*PqUvaHzSimW?jBi2>HgRJ%~D(<(i`({f50bNHd&b*HjCIv z^!^P>bEviUDRRmmk4@%D9-H0A*4m}sM|;+K9w{#x28UkUYUKQU$etzm<)cYk+gdBU z2clE0wZa1OhdKRo^jT)wIVy(oZ2Yg7<; z34m(bzX$w-#4E)2PNe+Ji0|D%MJxBmGEh$oO~ZJfnp$Ol9wPQ}iF6=n4c(1{BsbnXJPLos^S5ZZRZIrFr|l&rnELfLjd!u< zS#^&BmGkbcFr3Yn*iPp)c}(=n8^CtkeZ3ecsp9eskiTJI{9~1P$6&&3aelAm)|%hM zePU@1C8Bw`+?*%21krW3q>6ozC{_FeVWjz$G^f`Rvy5#?6(7n+AYCcFqK7fhP6o`G z7oA^T>`6&(;x46iy`@feGqU;RVwWQO>tDw$>Hd8ok6!--;8bx~TCa!w7e%FiZzHVS z{xxd3wT}KK?(4Dt{v8W`QpH1r5$E^s+P^dTNdGp~|JVHs()#}TC-coH+-q~h69c@i z;vSM?2h|WNQ(DAFv7JjFn|*=Woi))L@EgKWN~p56&Unh6lM5oF*3_$IdaMV2W|Ep4^oE6|T3%n^|7N*$ zkRc)CK#(f3zKo?9Ps&t#VxSa}ho?aFI>S*gq}sR*DbJTveQBqyoO5!SZK6HTAvi=% zP0#tfqGGYs}1G`(i7AN7lob_3d|QxAT43!lEe5Z@6k7v(E-H5%!HJ?YN>PIWPSyq zT&Vai-;in4(zRMKMU|;mZz`rfuCPq8U9=S`z{<5!c+XJf8d=?pl1dfvY5BjX3w@4L z`Xu)-JA3*qmzyMtFM2&Ur~L_?uQSq4?N+n8Q*XJ<``iaqykZ(Ov!PiDg{k9b{1BCo z<9}=KkjXtMAxcO-#3WbpL)!nt*_!}HQDl$*Ga-Ql6FWkp@n9J=XrhRT*OFC~ArqLv z2_m3?q7p+QCPctbT=0#g__+8EY07wr1$hzNd-5RCStKJY9sZ#P~}Xv5FNw@RF3Xf0hv_=A9E;N{olp7ym5$>Co)P0zMc~!rFSu zv)6hM0AG#fT|b&yr3S_5-mh+_TA|8=1eWirZwp5K*};le8wdNNlkzzcCg9%6t9F-6 zNZmSZa3#V^{^j*oD^xIzH$Z)W7ie8}h}al3Hbc zw`d@jF_WX$QNaY-Dq93X6f@giBVr!w(*c^EAti*fbufOBRNNoSH$L7DF-72NE`Ol)uzBmGlwf= zx=f2&9_^IO7UNjDNbgxpG$N~ww(XdGF&=jfcY!F z&?2`pn{ z=C+q1vE{@9&c$hmiIrj!@csgZRs z;N7UZU*$n^WIQLTJB=bLJ#Ha0u#AMraXG}3-{F3_?I-6HP(?y4k}k;h63xiULCDcfjLR$kuA1RFQ=Y$<8! z&%)Qj|0C=bbr%|<+>J9OAT|lLHHNX0!vFr9SNehPQPEje-=lx+@t=$SCbnXL?MhXJvOa4W_K>CyAyAm1tx>%)~yhkp5%@y94=+&M? zvmX7vh*zk;_<)abb!XkpJHp^fG)opz{i88dzR!fpwdX(n&bf~;LX|Rtp|7uOY$-3v!b=wSb3H3aREIH(Fk{PYM2%Jzf$S9_Ay$QG zW!=PMd@+)tBvOsfMct$Crz^4OrqS55?M=%@XLHk<^C@<1)kkD>G*xJY)(q=ia+vKQ4m$5+7Vf007zEHG=w6Ws!NX3eg3#|2K$2Bl2v`sPAA=_}WAsnBg~xzJ z>a6kVJexvEOKROT^+BkMUk@)*`fT(NiQhf?Ubzi2m5xGhjW^k;rR?op=7t6KyQ%lA z7|55Ii;1Mq;1V-Odr=x#VIz!Rl09kG)g-!_4>6f}h60Vt8QEs2%0QkOD!S`f{dwc6 z{$MO@st{q@AbSQdh1&8-$b+DCb>iEdHI+}oTVoM8g$b$r$sB-PKZgWpIaLRpVT92{ z3C4!MCJny+&KLgQ`}G5X(vSb*;juiKIIpd%e~wSDmouH*(XqMGO6iqf_8Xh6S2CEj zmo>iG{!&A)Ji@N4p3wKDQ+EmiMB)@^xKq3?n#Eg1KWy<=EFtJ6*<@k%LL^nX7SDR1 zI`O{fBU}HSfK40C&^uN#sh#w!JXBdZ-lH{d2TqBywkjfzBF4 zQYFUWN?U~gaEmP<9#e!vC6@RqrDG~l6rxMXht_FC;$;N%v?t~J<4YvKmS0omRMmR~L~^W_Y&&Uu zNvR3{Rl}Pmt|5TpJ9-Q2ED2jr7#c>}JB*AXPFx5LwyP5@nw_3;2@O+ExV_#lnso*v zPh06RDJH%eQHzsQ2I;Jy!$KBq4&zkAZq*svof^Mtj??Ez~X4$0s**H0HS&G zcvd>zxK;uf_Ted<)^Wei|}`_#A?%GBi*$p;~>){Mk-pjv4SaU=9>CS#^8DwUa#tdhw^FOkl`{jlc#v0R*2KSNq!!tbs)(P zO?j1VUV8LPiXW9AAg0aH0crf4ZpP;bT}HcivPGD2x3o8)JRv%!_`sG9W2gl!`;R9! zq>pF!_?KMtF4j=_CpN!WoNk!0WVt|UJ*=?Kpg#rjw}o}l=lZu%jab!$V}x|>je%C$ zFZ$gF2ny#U{%-QDAUc7rV0ZxS9I;Pq*|q$`=qwKbEn^sSM1-&t{JYG^{_qp}r;a~6)(cgAM8jRLcZhpyDt zmU(R14bRdn< ztlRlkzF+3v1lMtPouPD}EusX~9H3EHi%7PR<8`6YI@)!y3|venX0mXQA~fq9Ng|f# zlbb$dh`LqgCkwCRa~jSUU{8`W)}=l0M6yS~R0#M>sDr(HG?iq8*{LWNle=EE#SOe@vwHD$)l;vJu+#j~%kcqgsG;Rgu#%NZ)f({iZ4Bc5@mz!pz)TVVr%i(jf@KmAatu`Y; zbxHiFr#;^#?+;n6Pg~nnll-G)?Su5_iW*P$uZ*j=NRG>Yu6j~m7k%h2?eG&geMWC_ zGsmmb!W2zu?-WlFr-%BAv)|&!TlUVS#hJ3+I&;O#x%GNx@y-#&JCE#~SB#CiKAWO> zYi4nFXy86AKUkbi%z^cOZCR)M>0p~HkG^FkU7Nkjhf_OTIUDtkoUNhkm4_uLGAX&YAUIIlxsbVN$p7mjIh}aBhu^hn93}CBlFbn*k*@14?WLl$Z?Q zpyzf_Qs_m;a!p3xL@WC(MvJi8Tzd$V%+8*W&aqaO zQFFkdR&vN(1B87q#V7@;%2G;D_P0@pZ|4yAr-Y33Y;G0=K5b;yP5;Z8O3_KYlBcW? zZ_K$DPr@oJ9#gMP?V=5$c~`ol4Bb(-i*O^Rh!;CxpHH+(*)9%Gm#=ScQr}f*VgOIugz2BtE^y^ud1jiVEs%17beCZvk{pr~Dpr!S^Dr_{ z29l-4W$_H6^O&{$FD9>4O}mE;yBO*C04~QD3*MAHDoM8j8sE&fmUfjhO_wtc;y>h% z5xmyaAVFYE)f-;{q}DP~aQ&D+sisyvh`o}pggRR`uE-9uV~xJqY!cWhtm9z8@FYEM zUu=aN^!Q9&uA(JJU zEn7nWBnNqCnwj0UPn*7x3~z0E2A71EZA)^!EY8oD2;S|7eD2K$whUv(sNEjv64Ur1 z3gQ@%o?fi=6BzgpQQ6xQz82Q}-)a_6Ugw_`LsMyJ5!oqJGN9kAse|>yIamgMe9X*v0~=WMLb|fb7caiyX`f|A6LOXtzcXu>?w05{HamfGcq?BQqli zh}V;8)!!JBBd?e9YMckeGbfS*<4$>^HF6nu@MIj%A22N!OiWQTC}`X&;on>%lhH@% z|Ba$o;FEDxob!w_ps+Vx8OAqPOSTTlkjts5z&L@-IaTweOU@)s2i9a+IUwOU} zy@1Z@KI3zgigc%ED57PSS^1mC1H7~ARN{X5^Rg{C)?KDMv$4vvE}@K*9_bIv5zBLo zR=Tu!lISnfwneg0+xb~b{|HNuVjyDYn(K5-gTtKPpmJPv9TBuuMTn9_ui}l+E^XBp z@GDIPezarLv5oJJ9s_)5$F6gyqgr-$?%4G9o}KG=y!ZB|w+XwDupKYI-LZ4;PUG#4 zw|4IQ`mLS(leSgV#3(T)$7m(w3BJtf89ziZwQPhGrKtfO{i8of22G=Nj|kL2*e72< zr{&t!?K)k6#boV>d!QdH7D2m)NF9fUMmjQ$-y> z>@lJEcLc{z6SdSLd$Gh%5EjyTljcOK&@8D!3nW@k6*>kBLlf+3!<>MUHY+8qHN}lG z=>lVZPAwjjGB>}+P_(izQ*xfT*qAZd6sJm^S41USX%h~kpTfLX%t1?XeRfi>R- ze@{x!`7p`(>rcXvSJH!}Kb*Bug4Y;3uQJpB3$LchA@Yd)wGoh(J}SXwEVa_N_jN}8 z{GyX)^>`mKgBp+_3w8ly4E-6`EYZmbh0%5@Pq^i#b>~HYjRIO?d(>`w?J9yX+k_pJ z4l629;3Xp+DmPTKjZ(20j#d*x%cY-0*FC2rlp|J-^x|(IH`|cZ&3Dx9)6RZ_3^6EA ziFkOLSzN+X$<9qm{m?d=KH?1Bh|1h*8Uys!1Z8LV0+=>i>h{Pzw`YXTgOPaWi{%&u!MBY`g?yVg=>D;7;+}}X&FBlgN3HcPRb~c-c5KtdK0T;6mKA?j1Dc5hQb6GYh2lfgfcK}BX?obnq^=&}Edw@!O!)~6|E4MWv zArGkd3TW45_CUIG3F3<**L!A**&c6}hc+14`mXt@Svu83&f5EHBFlmp>{a=`&HUaX zzOr%Y1;DcBEPLP1bk^U9WM+EFWAPGz%<`u=oBt$lX$7RqF<0?c1w()1E9^eAa_|?1 zaP`#xou5!c+ut1iK6x=KzH~_be^mSwX7hpiH$9+lv#R}DJNB=4%bA*)TJv3`%M4mJ ze#<_w#4$Dt>)ZGgzS0gB(#p3Dcdd}csXr^`=JM(sjNrpJ9zXOl@kM7wu-L~aapZQa zY_vFo@aXz#eTy;7qtyNMb^F(k37uu*q-MFEUH2k`#=jMNKvK^n2+!=;Y#xDJ9DW?O*Q+pTPuMF((PN=4M2v6te}l zKBX8nD-%?y{x_eE1rx-#uQ!0LuY38sj*-q-wWG2+~x165 z8&mkN0Dr71*}_7MrTyKZinQ{PUE*JuNPgciWcZV9DZ>egr}8x=ciAa?F>@^ar?f9B z$7&{NU3aC*YvO143t%s_Z1Q%G$(P)71~TI6sftd|?xH0=HyFE$J=))s1r=kpHJR+G z_l_@TM`df~K-nWb5INK@{9zzAxu3suv#}3qKu2pY(Y*)O$w+J{Um+A^=LoXIU%dO* zjgiIGBqO2J4?=(1Q=al6pl?pJn)-t6EmFR+9$$2FzAt)hw#=L2BfJrBRj(H4l(h0? z499;`=(zgG?H-rbqV^A}MBZoN-n&zBuaOAmV8ow7r1u{ZLO+lN12Z0Z2k^D+0|?(Q0s*#z!zJR(dBiIh|2+qqJh~cU(z@y@hIM>&&t7D2R`Dd^M!ENH)z)lM)3v^6L-sh_x*3afF#}V+ivv~g%tpL-xz~9QY!Cq#;a(=fEra~% zvWj(D^}00Ce(XIZ+BlIZ$<~@>9I8rZ{O>)f#EIk4H-YW()+tH0WeJ_Z9_#pmxP8Mm z#wIbfUa|1KNc;EsP7UXKYh^P0R-ocdtyxw;3Eko-zIq->EBV~vb+dOkA=eV(#UsFn zcTQ|-KV)==Lq>N^h|N3|8GVoa+5jf2xd2gVq%~N5m>hdcH=y`^dPA1krymFvDDdNbt%JKN-3;d)Aafbg zoP1wem~c5Ez#T8r$2E!oqW*NEWtL-5wQ<4^J&9hW^^ zAM-Bq{~(dY1Zvr@!tZ;N@cK5umJMSc$L20oZ49>+FO-Y6-oKt1K{+f&HhL6aWEF<% z=7@sDRd@C z^-S)9MQfJvD20gyiaf?9W~iz}TX1OTfsaZz)8o`u9}vM49*I{FYOQn&QlH2(?MXTu zqO^o{-ir3{r^3DX24X0Eo@(vZed%bPgsCqBCJ^V6E8`bH#9y^S$|U4I6$cY{*&LD1 zeCk5We#$X)R-(p||6}m$YBQ!~wdF5IW!h_)ITbluwbokmr6d+Vi$6W}6Ru>3AHZ*D zy?d`-nU6fbp~}PP2Syse#h)gAt60Ha)l6q056DMc{f+PG?coRUPe7v5^GN(3N&I$#gd(kZ9GHaP@fieBo`AUGa>|TypX{OE@^>_6 z2BczO@OszY3{*hhP7@!f{oG5@dJh;JX6Y;4%%O~-V(&8opvsHV^&(7OdN1AsaRt)} zO!&j-9V3urZ^dEky~DBb85Nz&r&w~uc_*yg^eP7j<2t7KqE}=`E14R30|ADK`o_q+ zo;)#-BAcr8%539lyieVC&`7-@4sc75QS^-Ia#`Am{lr2xn_tSGZ;lT)q+O*LrLcbS zJnT9gE?J==eZQbule$X=>Tz$MB)vbDy7|n-hpd~Xuc*cWjmFPK$@+?eOvA|79KH2W zIa8K?XvbN~=!C;U&OIZT^MRZ>vJXsK_t<>2KTb1ZI3)BoGXjp+oyIUELL$sai(vY5 z_M%s7eVC|e^h#&<|AOAmz2By{R+1-eNH+E{7n>$P%g*Rs-=?VSR_2NTD4lgh?sB|O zKR2F4Jdct;$z}W+>UUZWFGmI?%A)irO5jrcSyeuZ)5}L|9YslN&4c(Wxuz2vES_nX z(kv;PSyCcn*DQ5d%5Y?EP& z5r{UW9}poc!Het!(F7zX2`O>fXEad{gm;&u#YVp)PhKHzTlpH>>Ql)}K=wfO$p( zLVfUWXFSfsKD@c;IcbvPc|43O*wD5%3 zw4{Hlfk!fLJTKbE8k$Yv2LlzxBGzb5$)}q^mvQk=CFMv*S>nF>wv`jI1y6jdrJof` z6cMXw`?b~s{C(ElF3MZrI8L7SK$x=MV%goVh~8p*`16x?Qd^?{j=$Bxjd)pO^!j{I)`C`6YSw9_W-o0j;GN08U*4-w45Bw_%sF z8Zz$gz7gkG^oe)h#Th<7yGf|Q>|Hsf31#e*gu?Ih=n?Dc6c{*!e+u>v=y^u#T6--oN_1?RSQU(A=$U%Iu@rXBc5 zT05FCeXFmOKAG9lDeFdB5t=w}WWAg3rJMDw;SZ~{7vHa<+qZgyFu0VCVW$}XTFYkP zbF30gx=R_2GML(1-@cdVrC64Kpoo{EQF|Sw@&{{`wevUN<2Om!+syuj!jPY`Sw2WB zs!2wKuReEe?#e5&C98hn0NlIuQ?v1;wUQN8UOM||xevs6knTd8)kMc%$5h~;+V=Ql z^b&(Gm}rDZ+R9oPF4X+X3h|IxW3YsD5+Ysj>xuN%4n|QJIKTZq+}<}CXHdL}yLoTm zopLt@5fE>bBASvPuOQ-!8Hjy+55p3|My87JRA%c_W?bw;5BoBXVeXc%}uImOnf-c(XHJh1aLmJyI8oPw^goP~||#((}!Ol*OLAl<3BTkS1DKU#GQP zg_t}GCW>#!Adg=7|I#F<1)O@ifLztCr&iwn{eQJ z!kbCrQ_c&4@_>FIK7>2@76D`3xljf%k&T`wGOZHSn&*fH=Qt}UEum<3mC$}qGMed5 z$KOGq%>*b}o1i)2pY{+WBw7TuD1FsOVizAZv9qwy<4oH&%(wc8X2EAN30IsUiS{2nkuoC z(aV!1ILa|ruxwW_@;yA;{st8)g{OPP5Bu!zw6W^@L%qKjTS7BNee7MHD*HQ0UwylQ zh!nmk#K8=9$CuGtQaQdH4d^}4MX}+%ByFY?O(1r4c1yctyLFJ2K_s}U9OrBBnEEde zy&g51RlN!$Ar=JeYfHy`aq(2m3?BQw4W$bieZA3IEZmdnh+M>Y&%H;f=o z`Prw)h@c#S8eEpAJw3I!p1mZ(^W(XUaa%Qj=q_oy^Cda&3*^@oe;(#U;$>c4i(dgRNbUT! zv|L!ICxHsR&tdE1`lUBe@q37(N=sT}Md#n3BQ4c>8p9tmv@43KCo{6^3EextMGTCy zEur|$&?szK5MW+u6I?8!cxfP2U^Y{ZFs%miqv9O43%1FF;eX-}2oUb+wsy z`Q4q#J<$rzx=ebO<*)UCs=m$L&O~lS_woZq=MW*IJ2pO99lNrq<6xHmVVvbzwB3Sj zWZ3#5ii3JPOUF7h0~PK1gd)arnHv& zYtd|P>>BYG`4HeLeNln8eqD5)wqO#5QT;J3z;on-Y!#HJgzOwb^+7CvQFwv3VT_UZd-T61m{@?BZF>)P)9#i`JcZ_rde^+N!G=%M#Zw7IVli>kj#% zs!Hs@PRYTnxkl**Z{aTj3De zNz%)!0;}YC7ShwM%DoqHW3?M{x0xHXp%$2yKo3&MA;XRdGvMb{t6&;p3&{oUf87U5VfH;W}y<_DbGuBEKYsNa0m>Dmb zbelwt!^>?Z{)r^Zdpq=0y*-&AT3LeJ`>IJFdD^=Xo<#2DTJ>6NOuX_ z5pZ);CnA(Fdp?+E3c!d9+b7UTf8?_%CQ*dG|$srbJmy&HtK;44op{$0NQ`Q_6>R zS`sbdE|P8ycl5~2_!WJ~jEIO;{45(r2xexTDsgZ@)mGKOHVUZl1Qjw(bOA+uEyRn; zdsk+sTAw99u*T!P#8+IP-S>N5eNnuP{k1HE&w3iwLPe+ZG!QIdzmVj@=v@kcu3kD zw=7qtyz%Tw1c()Vf>`AhUu!L=(RSg+V?4$e<()`{oGNqV%T=>9wK&sPdVn=u_!5*J zs@Q5vYHS6cd$dwx&l@Avvn49?l%{HPdt+nVR=j0{%o@3DV1*AYbgv&sQ7UEB$VtjW zRH+>|dX(QN;|H`hO6kbqw*)X7`Ms9?%VgK>Q5Ac&E4xa8}*pev*174dLujr+f46sth}Q2XVVk7To&~ffM6yX z)c>$gdw%xHB5&l&p}uow7mot_ByZ&7OmF1pZ+VQEqwZJk{cwo%7vXQ)R}4o z_)+dozG-GT?~z(8)RF9TF)XG-yod@?^@(<$%r97EW@xJmd6O+crL*-@2vjI!+il2p z83zh2?!Z0}8V@N0eOXuuo=97qV-KjEz8;j)A`#W4HBX@8q8_`~ih0O5nblN*XeqxE z6oAxUxuiY6cd01g5gTz2vTAXB4hD3Zbo&^dlo+ywsb3^q6qxtGTk#>#Amd4%Qr2CN z%uK;~U?(-EEdGd?%tD{Ol`o@GUna$C`64ER)M8PJ?_r6nHa)(Rr#7jzQ$^V{|B#wC zHdb&Z9L8Pdka3qP>~5*2vjX}NRaFmBamkQqb;*+=(XT(HMmuGUG@H=)dcLIk%N+4( zl%O&79mkoPkh4!IP>H_ZjkMpT{j6 z7I|AAu`=j~HD#*OykY#8R+*)Tyy3wVn^R_l6n8jEc#l`_GS=|si~5=TX;-_wi3d)L z8+l+ZRbik^3@<=(aOo(0om%Il$}6QA=+%Bhi(%Xf5fB3%@g@-1HBDQ+makE!*1%B0 zfnZcAyi6*(?>s^8Jcs&AM%>g_t3s5Bl0FrFSxQ56PkgyxkZEm7w-}L!De>c_TPLm( zyQEXZipe|hcZm#YDV3xvcIYNP8a4r?q zuypzHsrq=|IkbXS?dT;;Qhj9~#j?aO)Bc85yNHZQptlQ$6yUw^7C|ts$s=KkMI@r) zDJ2a{H>G!N)t(;4{D zgt8YaxXWkT9ZxMp0{imnV=7nZKB2t2Bt<`5;lClyPk`y3H zn7|N%U;yE-YrY%RyQ#{T%5^k3DO zQp-qWKrG@+WxwI*H-vzQv|9WbC0&A9q66an304DVmZnpISBaKcT3m8`8aGtKqO98y;Y!1IH zND4p#)3#%hvnFO_=c3ub!)Q#SyZ-~3JauXJ`~vc6VE79!69cj57%cdPQz9;9M&_Di z=yNemHkgSVtN%_FUWT`|)Zs5uk{;hGOhPAG;z?TUTXYTvLi}2l zzVNlf?PW52Z8_iKk77$kugo^C&!x~}e&&d~{I%oRp=?@yFqYXOg9pYl=yyf7xMldD zTy*%Ws`;JXE;6I7a+52bwn#%P-v3h4QsO4fadTVBukCV!C2<+%QiY{8=g2@CjI=*9 zPpviYAZ6j3#YHJJl}ll#sxOMEd#G=sNTj6|$1&-WE|o@Vbtzwv@2t!aOHjpv5n)d@ zslkW!RF;hheBJ@xr4PDU{xF{Ltv+acHNGO0K@rl=N%1VPSbhUFz$%sZghpk?#0R8h zS_yZ&3~+{qickbC^H3$Cgw%LCUa%?2=yFv&TLBg^+x+o4fTcua7oHu`Q?*587v_?P z$m+i+&U{_LMtShZsvNhFLyMHTN^E+uGjxx%TB{$Dn7Y-sAac2{wd81`dM}*RTE;?6 zd@X-e{*|ApPpjG+KaGs3YGN5956EbQw1uXfzjXOPyE$C$k)|-d9LYnb_isR^D;1p{ z2#G%p%hdNvMQupqWoAITuTFqqIveQh_a1o78~Gq#Eow12FJ-ZpJjRdkhl%-T@Pkn6 z6{n+gal@-;L}E^OaQ(`|N!Oyut=7RZk@eGY=VxTvCp|Gge>`aVAcXWNEAxCJ8JQg= zdqU3POjT7x;E2)P|Z(!)QL1N;SM8X z_0cT%LR5Lw6~(iaV07 z&{b%r4Em4@&(WSfu}Y6unN!PBB#8L-o|9CqlVsIOBo=uD^ouP*mCuA%&Pr=084_ZA zHqeb(#G{!N8^Y38vStWx>F}_`1o6kDL#;Ybe)sDumS(bE<sV&$X zBq`rJNj+W-L~4jy`PWTn6$^gdxI<{oBT-Q-pwXJoSMALpZ`AGW7G*5<+87z(`W?@R z?!(;N3zx58n;|6aSGzWZ~&B3I@J z4BK~jyvl)3{Ch-~rs6-Z;$y)Ps7BvJio|i!<|lm#Nr`RCsh=C>g;ooS_E*;3 z)$1qN(b`(47JKc4%`}yaiyV(hL>RB>O_U(}7EvXNsL-h@sl=}ow}mJvueFpzGSOzt zrsYc$ezhzO0==zn1rfg$FoC!B1H^ssB|kJwWEbt0T|p@eyIOqID8nL{T=lSbqErys zaQ#a{lWfjTcrcc?nqd;QPtmcSfuu=29Mr17vC}vWdQ`1}K(-ca>op&t*0yI=6PX1g zLH!k}H=54?{f|M9L~z8FRG|%o)DlwNvY+&QQBP=TAbKJ~6AH-|h<7mD61s(**iVuA z!@hUa8GK0lo#=P3^H;nR&`(@AOr0@}Q{(L7l0fMWAC!6m^fvBPjfLK^ycl-{-;*?_~AeeJ!BTru|QDOmDfo$SbUjXAhmp@Ksa~e zT`3Ew;GEDN`ySn&iE(p8pOhUBWr|HW#(7@csPgvc?X31-*UGKl zOYUUoPfnhYMKrN%i>hOFMZsD*61?NXj0v$3msGnyWCGL2*ch|f9DXj7xm}dh2(5V~ z6^nw=cU9|qSiDod$r@h`MAl_`qfJMuq8R}usr=fX_OTl*rjEWpP^#9MSC?+Amf4N5 zM*^}l0!!V46>l|lS4D?1j1e9Yh>brIs94`Lv?@AH1}#DZ69v9#HpWhv?YxalXytR` z$6o!;0ybm_B7{$%a_}j=-HWd#Ljp8sLZUg|%leeesM{Bn9ltv=gQe}VIFJ)4y+_0h zitKUwN&F3eZFeA6(Cmw{V5vP^?vFtnG!#cC9ASk2gv6;m`U-c`UW9xqgiwt~P%xu< ziMi6zW_d@mN-jey4*BCdtnPo6B#QJM`bCfNW))`&zj57@$XBc|gu#z6Bn!_uSvK%& z51lDnlhlIh-SvIk}nY^oqJA{a?Uo&2jl}i|14BFU&HTVRaAW>qu zG9dlINf4!S$}X&u#>LUBJs+|mH#>(81?|s4Yw8QtNlk8#X00jNL z>YvND3a;%R((nGC%tTfZYW^i+2x zV`MaAm6+53solFhVtiRh$=m;2V&i75MGyK|)`iT2$w7c5#9*$_eTF{59BOr zVG%9bFzW`QCv^1ruWfo2KTX3hG$OJjJ7@X1a6)yAYNuqwh+Y4o*hUu%o&G3=tHTie zIL_x#EH~GA#6Mt2&nzDb|Ed!e|1*Sx0wg?7@jJC2?+*(YD2!cIxjUa~0n&XfJMT`~+ab5#-Z;%cR@ zXj&TG==kiI-)#(&rdT+=A#}0oLpnQp6%_31_3W8{b*GskKB1N5?&J^tDm1;N@|Q0N#7ulXtxcOI|fhWlEe7B|RO zgS7_h#$%VBD{LGCqN~{%`YaAI#|jCb6yHqFw|*76$RFi^)cvFvx{MPh_OEk?;uvLW zeASkMuFyi>{rZ26Y*@PWt1uP9fEZI|?EISr`x@O#6J;nE8GRN8TSoY|RQYRoN)|2{ zOqGAwlvn92#0uBU7E`6&|8TV6F5_gg#AMsOmMY8zWv`m4D4Gr#vIta3CJpTX4jeE` zF!5tE@fj-d(PMY2OooO=M*n6H1aNK?$RJ`XZ^^>MAP%<}Oo$ojLdGo=%I?tjy2ljB zKP_ms$gcbbaWMS1ALWW_;1Qf{w4UqE)%kK(^QYrWcdX zUD35{pydzKg+I(+h3uC0fE;1?JjgMtWB#ILr@@!X?o6>iL`L1dign9BW07!mEci&K zzqYD?b*n`_{iDd9p@GCP(7^xi7s9f-}yWHUq`{lc6# zs`L}sH{pnPdm>oTy=aFwvL0JtSCtNkR`n%oD=BQRzOcYJ1{iV|7=ijJmJ zM9Rh3@kIyvDzZa~liMR3-Ku|b%<~J7zSoVP!+ojSACP0MRZgfZ-_I%mqh6+{MNg0g?qUq?_36{?8gKGrlcCEUjI?3y#t~ejI+bHod*t9ipPsSYr;cIq>Dv&) z(vIyPS)M}Tn^Uo?X#net4|=y7F@GUzPPXr6!zesFWPF<;Y9<$~-9@pm0nYYDuR2H~ z2W3yGNc^}^rFZQ)(13FhGeZcb&cc-rubIMj!<)l-&;b$(R_t1sg+aUB0CM}DoGrne zEs396`5{^6Qt(~sU{_PZBaZgQvQJbcM`Bp9Bx8c>3?HM{NCWwD?2O z-<__X{On2=o8Z>g3~Juinjab@T`q0SRdl`D-4YW1^ow3wyjknZrMEwqrZZ5$hE4~w zm~@Ig0NwPz9}dQ5#$1sPhSI3ExU^;&-M|Pbu4Z%~^F_&={(0#EvQy1EqPw5wJ)nQo zV-I+vF8z>HI8h|qce9Q#XQP+CQdQKCZjwlg-mETV6Q0ViSnZa&P@dIJp@9q{NyFCRyTM2;B5ntiN{ zJw90KCrvm;raAr)%UUAMq@HybUsKPK9izjpf;08LrSq781k?&r>lA{i&Gi zICu5zJoEh3Yje%}9_xOSeYd{fW!-PF;jR0l7TjIdJ;MsO@qA>3+i=^g_fxF z`+N&-tOeI;-QRG$PqyH0vF?McyPf_`)_d=}-99CU-!#z7*W)?neX@1`fffFM^?tkc ze%StQ-M88A*7v_!@AiG5^*+eDpKZaNV%-N?_X*Z_8{WSEzzVWJBE(7`#nxX`^;cm&2KQ>*u^B;EK!M(V|aOeO}zN zqcG=JFnJuQ=&!BXN-EJ4=wgnTN#eByZR`fcdGxU%Cta68T+^PBo$d)|iJ@bT6-IXPz5qgC`1{wP z;FJBoPDVB+<0q3Q6G!yh*+Yf2!fbbTFtb`4w;_?uQ?@(>-5ZksWOT16@guRuOO5)- z3y(s4MmR@%dSWA6Ss(b^7rk4uTfWU(v1Q>20cIth;MK2ZZuKWS6Ce4bckkfco7^}d zTF}nhZr(7(;loycKaPq1eBo_@($|7|S)y+LxDztrRH)b(c)iTOrXdb|3$gK&D`cfX zdvsi|oVD7kg@^-dw(ys+Ny%2bw_|`M(#(8PNOo_4$~+b0m}!P*;1w zC+dB_6^^Tmy0)}@s=^Q3;VaDWy|0H>EcgKy+-VN@Cmryv zHlaDwWy9z9z^kWj2Yf%^3;1^|`nNmaGy8yl-vRHw|GVkg?|{z$Uig2k@;$z~clo;M zwg@~!m+ErL!*B#^^yUjrsO>I?8vUu=Fl<>4d;e1-*Y!`bZ^ z`byQe(;e{r`hY**0iOwc9{-NT&#?~p;~xKR{V>G=p9{Rm&#~m;MhE=yec)g0fY^J5^qT6xT8OEdD?5fG_NWo>v_3C-p(kE(g5pmnQ#her7o6 zi96ukeZYU|fX@K_yUObu2fX`N-!0EMSN4|wj6UFt9Ps`6fFJIF&$Qr=)xMnXfY0g! zf29Mye;@EO9Pk7Bpyw6`e0CrB7dqf``hZ{VfFIZg{5=l%K>>K54<*_1%hwePgEdrUPDrkA~l-E8&0_ ztMTaYW{mv~c$q*Ee%kan^N}&BcYTrWGdr)P^p6d1*Z+J6e1D4`C;n_J6`cf66pMbR{x^^OWoF9(e`+7_M;!2{S@6#KqC92DZ}wHa>+cZYze^rYbHIP^ z81!UX`5o?nAKC}}c@B7wMUS(*>~gDczz^#KzRCfAxEnfVS{^xOQg z^X;|b1swRRE&Mh=PPO1hTKFe9;3pmvKOeYeIN&D{e6;%LwbH3~z{@V6-zCrU9q_U< zQo25|$18?f3g}J;{1gYg%^#0N&pi%!*@i^gBkQxv9`71v$=gE?_^Xcrf4T+#TL=6! zMbFnrMDNRM(f_mqema06&pExp>7SZc`!V3{cHNG4Ech9H;Qyxs{|N|AKmL8YzMCn% z?SLNy{L$p$EQ_$c4*0>qOMad5Tw=kyr}VDxaxTo#^iL@`I@5htONdoW55?%@YN3Zg1e56 z-)r$_nghPD5BPcq{E5JSSN&b+fIq1Z_+|%ukwuSP5AA+}P5+M_@FxSG&p#X9*0VPJ zlMeV(`hb7I0sn9x^lx*(|080`o2_?7Smk8P+nWyfz}??1pK%BL+*M}z+U*7FSJef6 zb$wyMZ?W2oCg4T>2Uy>o^6#G7yM7IC{ciku4)~cCyq#asL-Move~JVCdf=V%BNfqx zFLA)%&2yfq$$6{&L2L-TbrpXv>k!&wv9y>#^Safpm4*@K-tD2X&d_$&yF8 zY`egQztsUhxDWV+4)_A#o&1z^Y<}tv_(BWbrpGy+|5FG2iN}OD70RC-@FxK;{B-Jb zJHIbD;EOE$HoV=w1FuNj=zu>N`1JP0t_L>$T@LtDEc|x+W$R5F|7Q;PQ!RK~?>ONP zJK#_21OB+Hd)Kca7Q9_wJW^O(Ha({~;J*j_(d~0H-dPU#nZOJG?fg3B`9cT$&_3{2 zIp95gz)y3)4+CE0^H}`6*#UogAMhau{26_~uXMl{_W}Q)1AcfP@V|AypVDe~txj)9-}Oyr#GOkLUw_ zkOTf)3*N3T{Y|l#`l7C42mHuB@L%YFKM(lt(w}|@d>QcK4`AoF$KEjMxy}J!-UmIi z9q{M(0Uvh2U(g5qDhK?9z)ODJ7XNzmKZVZqBM1CN7Jgel+vQ;M|8WQWwSB<<)d7E9 zAMl$T@Ye$`_MT0@vpwDIfR6%y^!&<5KjViE_VR*v;92CLuKw2DYu$h3fWO~@xB2gc|E&Z50Slg+ zx-zW0jsI^B_#gFw{{;v9gTRaQ*!Z3D{IUaHJTZkoHoTLb9S-=v04VZ*EO~g(0smJE z-YzevJ@%0U{%;mN$KvN92mE;uEcDp$o*sUxEM-pbUB8~9|03;|4ezX9gB|b+2{=bt zcwK{fyJOV z+zyfZlWUXK`xxHVy_ih4^KR2_k9i8DgxTTpK5N&$IdZqJz1h9#Isfr@&VA$@`>V_K z%JrUY_5bRjujh;T6le(5-CWn`nZK~Ev3}nCMV`40p5aX{*SMOw^Xg`MLi0T}^XAR3 ztqIk6ZmYX(e&Z5P{rpBCJSD^D&GyvItGlhPA=KoVU+ zgiWov*&}!R8a~^6f}+~_w=HO_Yia_orzyN(!TiRMXKs_HVSb2D4fS(x4mZ}#c1@h$ zQ0EF>JIytzruNpcb3;w8sdK^&v+EkC)Yde(Ce}@#>Y6aAYP{>pd9%-L3N4ve=TWbf zm4T^KJ(Gh~uGG_c)2!$5jq}3`JQwtOyU-Pwa;0a&*uZ#~udaR`{BwC{&%de8ewj3P zaZO`z{>`o_;{!dn^Dl(7YOkF+b>BGFYa@pM~%wK6n6@JOJSMFng9nYO_D|r8gI6YTo8q;d#-8{c>ZfMSJp4sy$Mq!-I zN6KyX{M$S=wY4xdL~pqer|%an?o-rv%Z}4c|hgvb>|2!<$a`l%y3F)%K<(Bu!3BT{jByYsS}w#?7spH{0c#ADUd#aC03zt-o>h+{Tf$ zuF%4BFRPs&ZU}iskM@*HLKp4-D*5<-ze=9YeLTNg`AL}k(!(Tt1wVlic==7|+5TPK zaBIW-MGcB}svXoe%&uufsZgGtMRR9|=6HtB9wC(zYI3oO* zGQY8L33yD_H`FzSJX69q1;+W1)O3CY8g89fa~qNk`@(gXcP&7A0eB>6bMHT=$ERmcE- z5+=X&FbS{ZColppzj~hSUsYoxd9JSu)y@%yBYLDR&55GXb?b8n>2No@7~!9YZ_|ndH_tNktY4UqV#&1 zI{E4<*Enx*N|h2N+ss6+k@xF{pFjJ0&+v;l^UA}c{U`Ns5fyH@`qN}bJW3r?sG2-A zjg2)+%=RD3RAy;)&3ZMrp?br_CjTUff$}0J;c-Tq8zEmtxE{Z_Z$HS)`Nj`Dvk>px_8~N?vm*AIeg`diO z6h8@*-xWO1;V1FrcLzT|;S$!1;f@#EKFlCoY-ITzElk3*t?%5_CGYmn3i{T~#wB+< z4T)oir-%K&q)`H{v-q9OPv%O>_=)W(;bO*0%O_#-lg3GOp?!_y;XHonVfHusF8z0z z^Ok;$hhH(jA^aqKD8FI+Busw8`JKtnzEIDuGx(*4+28ED^w-2!OU9w4ZzAJC;#(!* zgZZ&7vkH@N@flzz^3=tCiY~Ta?iH5$Xgvsjh1bGc>8naT>BmpPWejQnKM9kcjJ?_O z7(A-7m3id!FcH}5y2hL9l+*^OHv-vniTbZs^~S1jJ)hK*s$D$@tlHHB^sV?+ixKa{k;H1X+H#gSY=9(f6abwNADRm7^=&^;Uda<7guA4o%M(TQ# z>&gY8`Sdq{n_F9{Oa`&^$JIzP0>ZiV*VHvih|7nuEva4EIQM4Sx_PMpAMc^Lw_|aM zRZ2gAo(q^%&wxaTYFn#yv!!P+sjd+-y>6as%A9Zr^`XeQMr;R{cL5d)xia6zlG2SWx{`yevqI+G{btFJOt1;VLK|wcVez=hjg&2f#R z3pOvPOd*#Q)l2i?s;;@Uu5sdgdKXtW)ipxCbjJi@N?onuc+X>s9X&xk3{j~pn7i2K zVdeaJ^T{tAH+j5#@0YB z{7_7*nRo5{`L~H^&QC9!K*I$W-F6#EA<~jaWz7PS5|!5Ynz;=~Tc~mVJmidf4ek1r z8oryvPnlEGxIkox4&%bPwRKh_=c{X~r4yv`XO+AyG^QmVxUJ^qI@ke&13qDi7!xW* zy0Gc53UHd3-7fWLiIXMiQ);B|mZ|}&r02}Xl&zBrrDDWsvNg-|1y|hg_ZIZT;v>BR|md#|E zOcpxH46}5>0)rw{K`Dp|f)Eq|5wr>@Dnd|HRFtwwmBp&?7nPqxeyB);`G3y6?@iuJ zlTbSSIn>Ow=Y7w+`*QAf?!7M*LZCKGVY23Eiiue2;Zeuz&XY*6l2WFb$!f2*r6uBL zRgSpg$1WP3w*L0GD!5Tzw0q-g35tgbnHfjaiuO*E7t1?OP|Lh^{T54on^yUoHh6su&?Jdw6kE5rxtWHq-^9+0>Ap>s zO;lerxKe6B_Y^^fN8h^k0ONRnfR!tkIl~L=63P=HZgz}J4`%XUx&!If12SB@4W-AH zQ9}!_^xrkU&B0idA+yu(3%6gOJB)hYI&!1yug1T@A6VrN`F)JF9WFB$Tj>u(ealk~ z&M+-V2Ov5;Un~$sM<@ZKVK_ZT+M=6{fo)q64u;Gq>$n$_I#W4M%B^^$`nnNoE936-Rl45VGfA&_tQ({Hi zQ0enO6sC~Yp*j)8r%%*ZC`2hKRB$qXP+EPvM|7<5rcN&{CGA6`NoQ~f`$U?>;oj+` zN~{a~;hOVyNi>VZ&?Nj;glBwH(PeI(&F zF#(|$rUy3aPMvhE>(ueq+7i&vftrp{srHA%ZpQ-ia6pz-P+ff-6Vr@+8aqZnMsSJ1eL=U0!F-QUE613V|JA<-{ zka8ZZJd#~j4_z+Fj_q(w1tgbKszX~Y-bHyOhp^Y>mh4RpS&AucZ#=TMZ#+~0^&ZjN z_bT)}^ceI2B=!O59H<6b2$evNAF0doQdJ!75UwFQxtSi{He5yhq1dcqy|sC<)*zxw zI<~iOJ9;(2Zg8Q^E8fMd!DS}zsdOdwuR<*+^!Ck$1pj39_FV;?4E^hPV|E)@2fcn= zZ{MAexO3AQ%tk`DP3-ME1rpqKVsGCXo4*WR%*w$(Oz7=%HRVpG2)a{g-eMs!i1IIz%o@w4YZ4^79 zV|f4RjNU%>^P2rF?JN!$>e$?n-5u$XL~CDUc6pY{ro>8FcLe(NzItDVfuunz!y2UL zJi+YB)K%3ltEz9PtzTZX%HF>j%3bx!dX(XbO`gQIOj()kN*32uR9D-(FHX92pVWkk zz}Mc%AR)Ux>sa4PKdc-30^5DN(+4pOM#F5Wiyp>G=~$cTL>UYdJF|L%Yz1V}rdeBq zH)uNgHzFuGQjkcFJ6F<6>VcrFZ2BPPGjzA95@~h~9J+{g_g`Y~$&rm2B~~jPJ$2+N zy+l0a#G`+E9iHqo+5w8kfdWn0c5}ONRhx-;FZ}BqHzK3E`0G{{S#xQr`{SBlu~`{y|9ic>|bN{uuaY0=Hb~4J3QE4P{~Bfo*?21HI}8#t$)n&;!0(bq;RmA6Vz(X|bvmEd zqs*V7PVTmOzFn-%&IF60D(wHV($HHrPRG4t_Gg#9W9Hyjuxo~{#NX{ugN?%fKf)Hg z&qm<~q8Ro)D|-8)EWje>jE7M>IT|KC(RE&=SCompY_Pk}B}re&KBh&8Bh zd;7Viz1=#Y%v!p*x~8hKVQF=>GI~Wib9NbYjApvV<~%x4=}_%?bO}>zj3hdly~q+r zMgTl921F&Ra<+hzO6%Df5sj~-NlIF7iMNh+jzH;|_4zT@8qH>NTBn?RCC>--s-#mZ z9wq#uh*1+6ov%)Ae}Ds|Q0va5bk!dI_CA|B5O*$DEnC80t~L8FW@$WlO6GB#f#YZW z(|(g0S(k}6F`+UZJOpPQlj^}_fb7rIL8e;E{2{4qLZQHBDfXemqmVf#CW_Y%6t5`@ zI*BNGJ?4snm6B7RDc&X+v6KTafuCJOnK=hZm-7mbX2B%DXSt=VTlf6!1)rVFr~9| zrcF|DMX|{P1+?$skY9Eco1M)zXYT`1|8aov^#&(-V3fV7(kRN`xhhv@c0dA|(}aqR4DiIriFr z!ai7p}EJX}_r};JW3t ztLpo0Tp>>HH+8wMsa?5jK#SEYE31}PudJ%vi}cOt55bkd>H1(zqTC(fGJATi5|;yH zDJRXeq_$BST2DOaSvp--wpaA`smK2Y2)MtVwWX}u#CSk z1X0U!r*9!z%kZA9ClQB){@5kxn4kbu0=*jV?Yj%w0xg7kFGddqjlT%J)P3z%DL`Hh8WmC_q07ZP!;Fo)&#}nZ`C?%Hu%`n*6L)(y*pmh;pn1H)TV2)% zEzSI&=jbB`@Rl$d(7ztDIC5h)41Iwi0vgJ{KEA@Xq1*d_?&%KNTSS|^=Wjsw&WVK< z`##-CVdQ;j-Vq#n*2X_7XbUfXVPcJ>>RJ}N2o!!CctXJ9gg&(6>OLivn zQrlWp62ENe+Z&NdiIwzm{K1?pBZ1Q8%P_ribxnRyC{k5hV}*Rp`i&)DAZE$*wJ5M@@>u+H z9>9_wX1=nT0)8&BQAVj3sx9-KFo$quuGZ1PT*O?SlPIJS zHBE_d@VA}ASuz_yy=Hb`tJ$s54skb=p2~HDkkhhkgskI6BDX?*^egn;&-eB{@|)hi z5nxmh+W702e!c&Zo;y&ZrAj%L_m2g5>+DI=q?v;Z1x8|DhEBWKD(=$p+_l0&*Y&l}K9-Bq;wx67!Jz5j;oo%taDM!jION&vOJ{ zNF2>`EYFeLd>PHZ0&cvF;BOz~!ykhEI8rl~8#aYJ$8jrXEH;PYww0SX2dOsh>l~y4 z+|W6QG#tsZ7`F#O<9LqawoZZi8FzCE)X%v=RG=PH<9Ysq+d~ETJ&tEPIW17P)dZeTacihRJ0`&~HiVD=PxI-f0WlWy?BJGDf%*;io(j}+%oYk% zJ@=mq)M{=#6{s`RRGw?N-Bh5OQPC7AKewL>)GF>e6{tEjljlS=i|1T5o98?=hv!MW z6%hJ7o@>>qJkM0~d7h#c@GMaad7h=pc($l=o~_i&68sjBM&AQ9-j3o&U3Zu=6Mz!&cVd);n}R>JpHPB)Irpm8hsGy^6)%Z#YY!V zi`_gAk_fIhOPt$Ma}%oR6Kw^HAh7ANLb@9*%tG6YfNwMvyjh`q~F8yP~>wI>Fg$_ z^cXq$gy`Wp7x~ObTDp0%Ba@p?+w|~kMLx&SX1jU*0{I+6+w|~!3i%vE+wA7~4DvaK zw&~&dEb=)aryIaf{a zD0O57LaBcRa_Ns>KEt*2!Td2mB-Omj2%gX6LFQv_dznwjySB$t?g+Z=Q~k?5L$`gB ze>#0xBe?BT{SO&Gfy=ltl>Z^)r*n`w+fe?8j2}ya7}Ecc@l$v*=IwL*>E@rpKQx{A z_e1@Q2xc<>a^H5J<4?E#5ndTP_BsAE>;E7reA2Mb@$ZNF&uIH6|BUx(u>y&;9QKKL0<6{CnsF z)5-qj|4Wbm4B-1LfBT{SGur-% zyfB^ePj~(&nNKJFG~54J;`gKz|9+_djJE&m_%Gr&eA_?upWXk@Z2f1n{nP&q>-~Qw zAKk-T|1TffNoW3(*8Gq1pO8-c>5l(&esP(@aF{Do=f5)A{(^pA0Ou9e_1B$ANe~uo%qx2 z|D^qMD1Z32|LpjW0A#lQhxPcM;r)Nz{+aj>=kcFEhMHFX(^~&!di-bn=_Ui2tpAL* zfATNi1WG6WY1KdRPf92L{W1Qt_D?7O>7M_{uK&|0|1|3#(bK<7)_+FZKaDq|`hSF< zd&v9V{?e>}x&I@7TQZaNpV9VD_}}R9;5+|7m~6QUm*3{^_=V z$-JClAFlU*DF4anl>dQ#{-6BE8Nf4H{~6W)5qb9he`f1HqxwJk|Lpodv-O|R_MhqT zKf~+)?EZiD{=fVIi(xzdGyjpl!In<`DZU~752^nn{uAH9KU2)4@RRnB)1ChlzbCu? zPb%Mc_5G~_eEyGU>0dhXe?aU1GCls&{*Ivr_PPAiZ2$88zXj>UkNl@w{~4YClm8Ra z%zs+_f2Pm>Q~1OA{=b~Rkw190&+RYW{-5|yNk{(DZ2x-yFMIz#bM>F$_K)c4Upn%i zZvUTM|EJOaq}l#u{O9jsrX~OB)_*ZyOsh|Jo{EzrgPAC5T(EdFLNhx6b6$d3O=-!N|f)PF|z|5<-! z@BgPEe`)rA`IP@~zyIHz-TzN({zDfsr2irHKQj4w2meellfqBZAEhb(V~O9B68^i@ ze`NRnlj|q7{D!Rm4D0{0_y03I{%3gopS}M-%=iCg^L04y|C9ft(j5QN8vltud;fpv z@$>(3{*#|w|0Dfrls}b|?))#K`o9dX|Kwh?}|7HDoY&zwiZu^(@zpP=I1F#HG`8-nhudq(CPuhRn5B+~e+dt($IVFGZHvb3w z_|F_Pll7m`_D|&5@Be4E{xjPCv*SO#UuNq+qwSyi&*=HT46pyQ`~Smy|DXAfD6od@ z_)q?4rrH0cHUA_26Vr)5-T6Q9d$Q~QwB$dn`p@wGAEKv!!?yirdi`hW62EtB<6{3oRof4co2@y|{t{sX=J(|EJr|4C!~-4FFYtjB-WU)lTr zX~Uj+BaY*a|HJbJ-_gBYYAGhDf z31TVpDzTTpZzJycuaTo>8nM#$a{o3FKZc?YPsC6CoFwmrC+&0$?;Zkh$1mfjqz@}K znun}sB|RS7T>6(m{(0|4KojxvF8gC1>=N-~F73t1ztm5+xO*4*m-B~C{1Q%5 z{t0i$`X_%U*zv_B9Ny(TeWLz(m+z}e_yg8I_Okv;#Lv6zN65RA|H*cEy8fkn5LB@z zX*xc+zvtv%;+MbYy4U$f-emkw#Gjgf?B)B+iTaoL-SS6#MRt5~aff^Pd+JX8Yk9Th zWx)KC33vUA|3k&UlYidjepsUZd6x=Ld*KhcgaF7B|Gzo+Tczr4#&!rziW(Ed*%g(6S7{waTtyZnhiwf!IHHnquA86yhbfk&=lm7qo_%9P>cl<@jXQKZbp#6K^!|mU>|1bF=Te=^8SM$IBK>IIt zw|~aRxV!uZX#WTL_}`t<{!_>Q_82d^cK(A?{d+IB z|C31Ja2o%+?e-05c}^YwyWR3X49EX&cmJP(@xR+W|0Mncdi+PZ;~@|4<@R6fZvV1A zcGv%Z;rO3j{~LL9`oHY@-;94+|AV~Cf-kZDNVESZH2r%oxBuZb{%6i+1Z=>Ohs|HEzk&#wQCJUa9L z)bT&N{@;J?U&jA#))WWQ_@7<>@4xy#5XXOyTmOmf%98Z~ods-G|DVe|G)9|LXrh9RIWH|NU40+4X<+{QrS={x7@!-+%32um4#% z9Z2JUcKyHq>i<9-|Fi4={a63l@&COy{%6_Yv=}q+Sy{!KmZs-59>;Iw0 z|Lp$%{%il)`~UB~@jtu%Pj3II_y4l{|NF1~XUG5S`aiq>Z`#v<-@jqK{a^k4KlK0c z?Ee3IO8@U+O*fSO--BXI?Dxm|FT4Mr{r;cK0kZ4=LB4-R-}s;Y{%>~upWOeY>i@Ir z|NYnh%lW@}cK?6y{x7@#|Bm1P{!f4ZH@p7df9*fJ{?D%ev+MsM=D)*W{VxZH-plj< zVp*TC*iC%@J^TH??E2r)e;~V-$Vc}4-#(rH%Z~r=z41T0{x{>%VCVm`>wi-|`$PYm zz5k!x|3A>q|7F+z`>*|H$N%@<_@6!hKlJ#Yz5l=e+P~=k|NW=$|7G|8 zliPpl`9Dwg`+xgQ|C1g6-+SYKcKx5+{p~wHR2iEwX{r;b+ul=F_ zIS|kPW!L}vul@_$3xtQDj-TEJi5cB8M67juT z|7pih{w0e}e*e?)kH~QTM-B7(A2H19e|va$pU^|lccJ^B+o5^TDNxr2Lth8)guV=Y z4l0I@fxKG`{qV!P`&PrB50-<+gS#)--Pag5^ytOA`~2|jpcfnq{^p|HeY>_9D!FQR z-~YgOe{y%<&%ydDclUk%irsyo&l-B{GrRjPf^P%Q1xJ88uif4E)aMNy4gL|j?RxS8 z&H#5`N7^6V-B$;Npdv^O@V+u=MMAzNzts{9TajqEJ!GwmwY2!dD#<3=9`HLBtk2d>5(YEPx>VxxaXGtkLvtnIE zcuM)IWlOB4U?)k4v~E%W$VsbG1BXK?M%!Cs!C1s<_CLxO+PRD_fGF)U@sC|<^ zpeiKGRuhTq^amokCI*gAYEGx!6%#VGzRn-D>u+Fx5nKM6_w-#6>Fl zf~_?sOC7O@6x#;B$&4M1+g)tKfG#bvL{7Z{U#BljLA6j&w1MP!QtCybCAg&Oks?f_ zE5-dDWs%$xE2^uknv;DeuRD2Qp`WVMQXj3Z*@^~fiS5yLU!eU0zqJ?szW?XleL{Et zWp|$s+5|uH)!ltBfx@qaPJ^~!)&>b*Z=>)+(^B3Ya|e&Xp7t|=eqe$X4#uMGoqj9g zkH%;lVjha6ngS{=?Q`>hA}>8xhfids!q<6H)QUy?R()=RxC>F3*Whcc`KM7_~Qv zcN#syAaUFNov5QhnsAGBA>mHxWLrps=tox1q8~P&T=vuhO=XQQdmsGC zX_qfj>d_?*^$~zWO2x4=^!e*Q;Bm+uhqu40mN6zwo2Fa08=DSS{15(<@#egczm>73 zV`1s0d8OvJx<*Ap)(K^n9&_*>p#=s+4uj!#KM~QpH8s(FSnUzr!A4@CP%td!GDtQD zH+Gtiwb}Zhw`v(RV|p9xO(Umk4t7S`o2f2;Cvq!YuSi#eIIpO!sa>_AwzA6dMYR8f zK?Bk{RXJiU#P(>d`40=k!*sspa{HwByht9%>Zwf_<;6r{6d0JS2qb-HXM%M3a(zp_jr z)yw!AnQs*r1!C5^%~5}3^4J0MAtPFtrc1q?5D85wZ))#s2~MSqJEpcr8k$L@DeYib z4Jse>(K^RuFu2jKHYqz>RAk)p`om_t8p5rvU1@7po4>uaEowP!vLhCVw$m)7HPVsy zyW7~_%;-CaGimoaUOmei*paRmS5hU#Nz)CnGi9kIMZ~*7PfMh1B2lG#yJ@8c zsCn$-5Yt#fWORwN1!I9`i~e3)nNFTe4IPeBtEG|qWxN%Eqv0_d)Kgf~%3{&r6nbyc z#bDPeGUIL~8+?J7KeE8`r8tYMZx1nYNSW5T8kKR*P$d0}sUW9CP$Rko^u(q!sJk4? ze}1eTKV*>En>z|7$)rSjn*owzwdg5?U7?Fz{!DA?KsW~TdbTdSbEP;KmYdoJ3Vx{M z+y05$Rj#fS3=m$46=+}Ym-zw391BGUE*FMxGmiI*=HSJ?B-qLXxWBdG)gLfTor!5I zWO_@6jy8XX-zqD!Dr#4FS5?*3RoAZ6{XFSk;SaY;jq7G4oomyS2u-KGg{21*@Q72& zQj*n-)w+r9(b~;g##)DDt+y-0264Z%eN!w{Phc(~sq;5!7lYZWzF&)#H|)1_;R;V@ zuBuZ~t87QEH@oMt-JgxJ?Crj{`)oCelC$bU4ES23_SYj{Z?m0h$T7wVqk|KiQNaBx z#eMFe?v2M(_j&Kqz03~+u?dCv%<9yO8ncX{LykJbsBUmR zMl7b1GO`uZhlJ@4tLMyWwv3<2D%wm~%?<9AC((JA*VfmrsH$I8UC~feyR61^^k%A| zI}RohEN69}!JL+fhpfiTWLFxOtSd}8B#BJjvTAIsXxP^o3ApC~(w^3LGI>b~sK`ue z>_v*xm6$n}Rgk52{q9}2_oHb;kcVyFU>f zx%^W5tA~zB?%zJ}4(@-E;=bXA3(H3k?yOrjmyc2-RNj`2<)hVDRsNYs`51OQ*Is>o z`B=Wda_M(E$_vy)b<8vE<%g(J724if{ytT%PQ9E%bOZ>nw2)s`Ql9#g*`Ra1Vf`lGsU?(*{E)rg$y zW-TqZ)QLI1;F9tQsv@WD>*eJWmEXpX=d}E5e)%MIch0t&x#h*`sho4}o>_jf+MSbs zLTP!4D#|r@dT!SpCFN7qg*JXQcUJtQ^6Bc=xdo94<+Ie-JcH#nhV#C5$+6{g)onJu zkoWt$#+A=khmSD0azt*)q2=XjtBpUlam2{mKYMWbVztD^kJ|Xi$jiO332ZR3c1V}5%6&1?Tywo2V(V~>qX#yoV$^JQnK zYi<0qjh?Z_{Ig?kiT|SPZ1t**%MLQ{Upy%A#1G0E)Y~?mQ()e|XXDWa7yRtrvSzi} z#usc{e26js@*!LQep^|)8uLDbVH=;bv9j0TWBdc=J?H2{ADmlunfi#0`Nx>|PuY0*_@7LfRQ3t=c^fAlYu>+R zQ8@HZp z-Y1{(_+hmRzpQ>{W3a@$A3o)@Z=AUB4)q-yeN)Z*m}xt|eb~Y~)i-QByVSgooc`9g zf4<;u^>rK1neo7g+ZTLYjhSiiej8h79ePxJ!8g>Avkm@a_Set)0PmaT{Aku{mqq6&A&?BdFoF;^~qDWs#E9t9)A1O zOVq>jKXJ{r`5#tG7ToZ&FV2ss?=QIXTQ|(_P^AmEe)Q7$t?CO4r#+8bHKOd}kALCR zGnK#W;nl}2Sfw5;``#g|7u2Z2@}1wUUr?paDWCt1%NLZZTgt2aKU^?Z{kA;%MB&0| z>c~Z&7f)GOtg05NxmPSaUUe+`*p7!69-*$ZbvnBi?LKV#qMY4L&bvqYVAb{UMRDa( zmQs%H$AhUS|E_?%TlcTMdeKcExc}N`y)Q00I&j4IFMIuGi{?JR`Ofb>Jx$#4tM+K% z(Pw@aJMRYHT=d$hZ~c48)D|0;dXnu`Jo&xHPDjX7*nP)ue*WTX6*m6xzOA2l{LgQ^ zw&33%ImN&1h=1DdydK;9dmsDD>GvP^v5}r9COr4Ai_UxFp_g|E^P7iGnx22x__KN* z`t>jWS@(x8_bvKvbwTbam*2KXOq&;cebMGWO~S=v4?Ql{H@t4A^Rh*euP#{h%`aM> z&sJO!_~VDCd5)+ldSc|$)9iSQJ%2g;#=AS7JKyBzrLP!NJ8XNk=u4lxzPGRMwMC{_ zUbD@|+3rehoM2<2jZkBqAzlLK9%ye7NVNt#9G1q1a z(jbctbQuZNT+LZ)%#>lirPUfT-;!A%szCNun42{lrEXPiH7h?BEcVakufi+{afzYX zzpjU(Kx2?v=3Gs$g5$;0BAG!tvHRta~u&NuVweqD7U)YJ&g+R~X- zvv>^#L!w+}nyB+((zzfdl`_BGW8LA(Nb=glsMt(_)CQWTM53EfQAi<3nwe7Cs|&3Q zCuG+ypg3|*?e?&g5KJ0bF-<8aBMoi7NSnLrI@$G#SPRRnCDrwH4J#I}-7^aD;)F8b zbd_`{Xo&ftBOev0h1dbWasQf@7kj?xgkjI^oLL~ow!Ap7bWgQv#94Wu6tcCFd)9-@ z()%j{Ex}6v+Il;3C+vYx8br`mP)k9!cQ%;4*M?}YHCR^Wteq69FaST7~M;7mn&Ap{+7jN>XWukD#=&V~0wf zQqZb21XwhH@)LJXj6*pTcTP%%a@W?<+qVhY3S9@awf55;yuSh!yUg77ZvHR+-oDQA zQq{SzOjlvUlGRI>R;}WF&g|JU=cwWs>&ZE@CS#vm{jxu$Wk9#DWU(MT)|Tu7NN$W& zRr zO-w!=f0e7MhxAu@di{X*$;S&4{k~PXd|>xZe08-;2MjN%L>UM4;MU&REPF5hh!yKh zXv#Zd9qY)YsDAA&c`dintev*Hm;QCXD!O?SkS>_LPlwsZFr`Vm+3WcAzQ!Q#^J1PW`6#Gdf1n>$XqoUu*|%`=oxwwtuUmw@;`vWbhB2hL`vKK?es+I6cAM zzT0hnyB(i||J(KH(Y~fp;uRSixCdxxW(P+PZZ4Iz?v7<(b8FsYT#dG|3G3SElY=MI zFt0Q1h;2NtK5ioMrH1Eh-}>46*zA`<)3rJ2+Cb6m*4egb4$^cbC1&%Y+27)0x6hVB z>+BgNGtOn#z&YMCWRS$)WCklqU2^)|J0L^F?~XvmK+_s5JGJ|klC;WcFUrR%?xco% zotv$o)_mG&c6MXw>tzl$`Q0a8pE_dpI#@j>HiwP=+MUlm$~z?=?lAW(=l4dA-1$kC z1B+o-3vEgnqhr0Gw=d_zy?x`M0Q^GGp(}a+2K0Q2xnu9f0^CS@4z#a3kBLV^#2l|` zkb?*t{3p;0i!JAQ8uZd(VOcN|j8p~NMeb+Jo?Tux?-bn~m}c9+2-cvtM+_(Z`pGlJ zt^Bn6Iq&FxhGMo)D~*wNCL=Ps>fT+?A>N4h_B{>V3tbCEp?Z10gm)+k)kAMUPeX@) zq_^*pi=m5fb761aGU%l(y?qn0lZ4CUzYQYY{ry*RALJ}g6LWK|zSkX?Gsq*Cwr*bX zS0Dk`o;+>6ZDH8AJQ`EbRrTipU&m;Y`!Z1|tm=!P%wfP7MTGo!X!V zv}r_}_OB;&MfAtQx?68FHEeEL*A!+2;i&t4KOE-Z zhS{DdD|7Fe>KU?>O8@=@>sC{vvfvzK?^N6;El|y3$-RCRC;F$Y247ApZJ$^{*0BL! z*JMrxnTk!$r#Gn8~0CJ>Gax5S8YH7 zlU{?7sQcaK2T2cG!)9e>&sW^h?ZFR_pM-yVKD37)x4}^U&AQI*dQW~}|EPlezK*(J zWT5gUeU5$0koJ{r(V^|ne+T<;`yl@N^P$u4>a=CP$RQBpZ_jNh?OZQr_gI<_Y-$$d z?qzb)Qdqw@^HTjH%Wlo2thf7Xl%ViwNue0Ab!p^UAZtU(9 z_j!Z3UvB&RR*HMuH~|xiA`|9YOMK0iEX74h+Q6}^PV}XnQ+?Ctl$A|4PG$c!Y3*ti z%LGdFjw5&{XrJFWq zdCc&ps-%lfEb4Vcw#`bJpBuNhSW#K6m4_wPI>~{rl~XPDI+w*)ap|U_O?J9m{zS83 zJUA!y2kuG*tC`mz92HssY7r+R8}h6)M@02W4(Al6 zKDD+X*v_#xeeFZv;t0pIuX@`P#Ol4MPHb?jU3j|hj&qqQkSShSm$$S zTu(XrXI`u^SQq-j905=!9!7Ez_hvs+EPY49@uvceR3QfBDn(5|!qlO#2}tG7?+ zvD^Epgm+z@qW_n|(H@fb6#}smohNZ8^6V~`r2T;8LqpElSn;N0&WEO5&K229Ss!Oh z`;VR)MTk*^5}QP+%bjkaQ&dpRQ<-}8mx-v3rWrqEj*XAzdwctYn(phTM&4ifUTLa42Pn|J!p6E&S@14VuqCqscXEe=`Tox7*?>gCNl6Z@? zwG^D)s||Jz$6LL2@hVQ@^v`2m@$daSHsNW&sccfd2Ak44K_sTMi4rxf*pyEH({b;f za`xM*gzx?tsN2?M-#;aFf^^MF`~5hU{ZpZSJK>}slhZzqyJTBAk7MQ`j(Pw29Ak3+ zqU8C>k?+zyp>QwZ;l(DjU9ulqrFs@s9d-6^j=Or+VT*dd^0y~ftP3sLPG!Thn(EWZ|WS*&k}5DJNP)zqy<@bZ#&d zbNH@!*2$)~m^|66-X3^@F$202x&^up(hg@NJG|-1-o8&mTcHb~FeL8m&?GR46}e@K zqK}n3(UJr`3YW8)TO4d^DwPv}Vxm*f?`h90n84gwP^$M=y?y@+{Tcclv=e&l+1|c~ zp>IK7g}NXKcSFP9-U|Vh7Bp;X zt)4-S?H}$F=cyAh&_NH{p-ShGa45ZqXp2m#>i&&hsSmvv_YLy)C85z3@S@aqh}+kh`Fo57^Ua6mF==NX=C)Qnn;i2Q;mA{rDgG3u_`v|T=@_ZBW(F%gRhSZz z?V09aQ;gddQB3v0VBJibHZyCFtXJkv4rekp6$LgC39(e`O`SEesl$lJ{KFU|c7Ovh zWgD^gXuA=Ak}u2UO}{7k(k3oXmc?4sPB~GvGLLB`MKLOjB8p5__9^OVZ2Yz*UYa^= zH|!x>I_0c25WQf8t;k@f6Oa^`Oj_+rsu=4XXR~);IlJCUroYHpduyj(c8&CH=CLZq z4neX>byZcBl`OMkm8kFn{!PpvlN~$e1A20aw`Elj0@bJQE!XLj5VV}4h$P;<@u8Ih zI5bz_aH4N?23uzo*HCG$7fSD>k_{(majDuweLI^alK+K-OwP=!+ALk4EX^eBrR{-0EtlAseXEYhx+&b82}IV7RXl{pNL=YV zjnWeIWL8I9B-3qOxyI6w1e2;JM4#T3D4IkTb<=5>2`;D7}U!>ZfE2ZrW8GJ@o~kW4z{&NuB*_Xq6rqhm+P?OW4sQzL59Pps7Y z)RMRcbm5zKBClX|(KfOBgpQ=CNUiaR?Fay*-UMk=~`X{A-G_j@C9(qy)Dhgx648U0R~ zJn3IcI|H`9r_&%>4ShgF?juP5+Hl6=Rn?1^)Ktmw_`PyCLsbT&tK@i$;(m?PyhuJ{ z2Srh_;>^<|54f{D(wI!)5YDRh zrZzp>_10Hdm6*@B7TV=nu2**E%A^rn-0OaUW)~XLF)6O7U_1`Wh%rQnj!cU#V5O{t z%!YvOkj!N{GBR}*(o+;uGAgt37Qu#^*QHE3{^XDqHmS zKA=~su$)ZEID@LomX?_!1!ot{ld7f&G@dJVq775($$zjuh2}zMKr!fA=pM+pnV=?& zRi!eGD4ncivRO+0LUQme02^qF>}eQI7_JLO`AUT2crf$+K;Rt5L}G`Gw;>HpB(`H$ z2)4QU(rIRX@l_kUZG6VY|FLmojd6FhjniygW+R6sr?f|=Y?Q{R?3Z=YK9%`u1|MqB zH5IZyWkCtiSr?0COE}meC8ob#!A&M{y5m)IrNHM-Hsg{0Oo0+1G+!)G z)%B|#mKg7_(|4bZKd^C!jj!7{Vui`yAvPXv<9HiSvT=ruw%F+oLOKGce<)_bWsae? z1h_FbN%spYYgbh*u3WWvjlFQfbDiJ6elVSmtcyY-s<>Mvs?z~=KMTyISdm@Ra@|*4 zb>}5%9Nd42K2xgW*^8i((<`D*`i$ghCMvTslVpiDCEir`?;K%rx>Nm^SWbNJ9Fk6s zXrlFUL+VO<=4PbGozIkld_Td=X^rz__s+q~gdd6B@xXk-?2C(DU2n%q91M#(B#Oj2 zSNKEnu$ zEEKLrl=N~@4^^&8HyPFG(-Y=_lb5vbsryx1hnu2cw2O`X=7A$NM>qF~-YqAxZ|z9_ z-d3xUfy_}W%VqRP2geg+kdgUfe|To(=r0#7KJH?1gtt+pJh@wB-4Cz?8-^2<8F^YSV_w#5gY}vE-xR)ufxuEe;w+vIkTK_#C~8Ka^17GiJ`3J!kH`Q|B*OSXREsvv^5GW!2JU z%d0dIU)-`c{uC=ZGy!C;O&S2<#zM>P`uyNDo z3qHK%!iz4BU-FTUUiz`iF5mj`Ph4^3CqH%7wyUrC^tGS)?B}k#{_{87_=THp?z-iR zU%K_nx7~inSML1kU3Y)&>)XHa&3o>>?_1x#|2yCP-UHu%@S*O9fAGUce)Qv?Jo?k0 z{rs_C{POV~Pdxe5)6e|s*`2@s&2!Jc@ZxWG{qFaFc|2e$O)eq_lHCVX+-?+?9Z)sr*6 z8Ge22CqDSIlkYt5&qsg$tl!N4?gej+x@_r>C*9Wa|Bn3Z8NZtItquP;C zeyr+8MPK&6e8gu~KQsHj*xwKS7jr42_Na1~?%!;JpgIOQuJ$l;O)(e~GTw=)oNMwbQ3NzDlj2R<@D-<~X!5 z$&zs)#d^S3RDg0UAaN$(Z7xUs+gy;+dw^muKQS^~|5MtpbgD!p4b+S`tf&VYZ1!rr z(z>(3LNIZ^yM9zsXg13BwqJ8{DET`>ybs*{sG8~};-thn!~QDYtf{3_XO681hBk+_ zqNTWLvNiqGdGn@BKlRi(q6e{R{4IQPA-sp1Q>WW*+WE2(laXa%U#P9UiS-qS=$vyS zPP!bF{S~>KARimFzd^ud7{;}TC7Tw>(`IKL>6-YVYH9C?b!h#8KI(vyk7EbslsmdJ zeH3iq1%OV1^W6j2*WzTj_tq?4xp-AY?aHOq%Nl_CYWsjmVm`+diK_#0_|J@7zHr#L zne*!QJXz<-o+#sVk7;tUJ11l8bc@?4_2o>Dg;zQXwdYJ(Vlgx274o^f2&#(-S`DoA zyA$|K4m${({I_p^NXxYgzTdr3OeN{12KJc9x||uHAFy+50(A1zDoYKc&05FTdQ44j zY-460)1NnV)}lt&713IDsm?)KOH!On5#EtzB7q&#VxF~ zzYE$!iM>tPN=)q7VK4h@W_O!baaLXZ;`*wF>Xp^?4OJ^E_&{13=QdJKmLwks7(Cv} zDjlyLJrMnYn>NZQ`&_}kp6e(c`12f0rD`aG$)ceg#L42y+9g#Djzg!oo$m})`q68! z`8dR`Sdz@2Rqdq}i4XH}A>RA9;(2ioth{;?-wWc!9$_6Hn4f(@ z^NlX^jTp1-Ouxwqy+kNZaV7kr3XT$%<5TY@i?GPnAIe(Ga&A(EBK}x2stmvWoEdS; zNy2DQRHx3ly`tu+wmN!9e@qh1sOfU=q|5WHslUc24NeWY1`!;U-twB6K-wNUR77o1 zO)9LSYN~2h0sgsvp`b%XiH?EYDb06Kz?tZ)2nCyDk zv9YItb~sAi7*kspzBKnD$9|!TsZO;X3aX7f%dsFZwU~VHJr13ZcI>EG)uMc=o&5O8 z*9m+BW~}mJA5^V8eX2vT?V*YYC4$XT+hxC53AQzucH&>$#dHW&Y7<|B31cSlnV99dROQWmZ>#_u}Y^sib;nKbI&v@#T>=)3ijCL(6i|D(kagrR$tz2zN2uN$8i)n zKWr}SYJ)xMC*j|5&v8G81$+9;OQJq6ZfKy!+Z`u+geOHUzqo!T{5$C!?E4Rnd!<(T zR-zMV;hScil!i!~tn7DaFyQR#i{_rH4S=+i2%d1l3^ z$9v+HgsXoKe0=BUzWL;h3uoSb$1^AXqx#gc+ux{s`+Z-Y@rBP_`FQ?!&n~J6-ql<@ z>QQHyalG}T9sg0CBk#NK{!cIc`@a_bDX(_kiW$e2{%iThkDRsep~%HA)E*&QH3R+{ z8X5xTt0Qtqra_L{sU)KmUyH-7`Vy|;i>p^oRtalajKuizDxzr> z*HtgWPXB5dJM{VG_V@gd8c6k45@AoBUR>x2CqP zPKQ(^;OOfCu!jI=Pc|UW|o7+t5;S!sc_~1I(ItV4V)9> z3wGh+$?OBmCm47Zo1;3DEvuL#DeNnh6}55%K;3vN?G<|AOSEn994G*7fx181lQf=p z=OxeIx zRhk@se#(1c%Da{F{^qBX%eT~?_c_gMSw#gOh+ejG^<-<-)KjOHS~E(g&n%riW42W+ zUs4Fm2ZND(yEQ45b)PMttUP4fOSXS7J!rN+%=U-b{xI7gX8Xfzf0&&=XV(ka`9Nmp z1J1fOi~pr1P{>P#)Oh$pumLK8Zv=0HX2EX<{{bz8S4Sun zf-2z!uYkPp+rTHrE43DW7npmjQd{5)!5ZjNcrSRRkhllWJzlA6;TyrN&>dn9{usI! zeg`<)QtEzq54aI}1U?Sld4f`p!EXmUPeexy9|F%QQtEm5M(~tLXwu$#@Z7;r)1hK`4=9HuOW;G`hfbEifk61+lh8c)U104gln=ZY zJQG?jZomLk10MpnKwkJb_!?9X-vj;&YJ^uMN)RVD?*eC? zNm+?|@GR(3_(t%T(3S8zz|OOjx(+@BUJTs<9|u1M-37l5yaCz{-vur{7x{$uf>G!Z zaSty25Pv;T%)zzLWAKe&8?*yH1kP?CeefP|HT06W0XIOez{kOfjnpxGDcI?wF5pAp zmUWc>mv944YN9;hOTmkvQZWaA2`z-*0X_vShu;Oh4AsE*fNwxvc(!lVNT?pZ5Ih1} z3vYo%&^hp>;PEZUr_FqY1wI768lo-3_kf=~pK^oW2L3MoD7>IIM)|-C?h=9*{4{^>=2iGEux=w|0^bP!ZIeSAOJz7YKAN00;fZQ#QnrA**=fYq0iUwAM0w@*+{@ahWswkye(n1g@1ik&3* z9&qC}rEZ0fgOfgkJiwQNecwU`;MKR4I_goScEVfW*k7;{3||P&h6=t+y@N}kaqwR7 zXOB~N@H@crCrF#P0lx_~!gqtypQOyi931x)@(gc*Z$ew))zeCS8M+RBJGlB8WEj2? z9QiBC9KI0z-m{c5d^dQ;PRdr?fd7Dc;MK1Q2U52Y4!HU^v}^cA@KcZlzYTomIb;-m z7kJzAl&!c2fB##`4!#GRJu*kFh4+9>(53Jp@L6ap{4Vfq=vsI+Dn}hPHb-3tZ-MHt z9Ce47gQK8s_(E_h^ay+@XdRxT9u@cCz0gkhZt&JHuu{sh_yzXQA`Lfyf4fp0*s!mB88LT|t~f;U3F;s#u}AxDk)3grp@9x8zE z0e`ZQdV${ozPgFJ5OeTT7f=`Q+rSwg&Qa&Ud%#1t^eZkHQy%ABA?pZv!{;5x`yWaquSS4frnb?|dw;7ha9XRUa9Zs|xSNJ$Nrv z4Brj@1uB8>0SovzU@3edcpNkf-U2J3dGKEFQ_w>AZQ#{VC43k70JI#w8$5`Q2G+nA zf@>i!d?WaTyuD!do`BsAh{=@PxxC6Zlf_KF9;#4gM2a4zCU;{ZKu;7u*Up!fykgg#z%qz`}94Y7@NR zN@$z72QPA0Te{Qt;Ez{qSAj$w%j^ZZQX6Jcc~N?*fa)BM)K@UUXcpdI>%b z{s?*#eg}AuMSj0dn!$fUS=61FgKy8yRd>OwImpjE>I=RLEIO6Ez?Xv4p&jrZ za4GaOycgU6?Szkmw?ogvZwD7Ipnk;-xO@?L+zt;60VO>Kri# zpI@5G-*%%6L2Ef_h8O%kv`yTA=TzsaF8D_9IcU4M2QT~}>4%Sl<4?;~kHK5u-&PVX zysFJrH?N{S!gqml>uF=(AYb4?Yw!bK2zITd{NV+w&Z7L`z2F^?2Yx%)d^UN54}teX z&G6k|;klGKyx^Ho9KI18+d%ro99#_D3hxDT8wpp;!Ha$L1@Lk3(RHLBeg}AUQ?BZP z?*bc}=|kWJukjP#H!%lag)I0Ua8?Wb2D}IS8?+E!wdSg7XgRzWJi85A6`Y?;dg+SUPIo+9Q-%*JiPjJu4;f@fo}wF zgWiDO4(@~)5Y#U4YuDzgeE99)8_+m-^%?3Hnh5U!FaIoM0>2HMa|iM%=HLZ)QorzV z@U^ezsy6r@aOPdKFL49@VCKbAP)!H+`Y;J1NSL*wDQ zz#hng7Ysa3+k_8+QOE-y2QP;z;kSX;Ld)U1z}ul3`0e2RkQcrid>pEW-vK@it%ctO z{t-F{z6X2@YJ^ui7|Wn$_(E_T)CO;XCqV)DQgAL5g7<(Qgre|X@GNK(d?VNjZGjJg z7ejIQIJgzM6n-0coxH<$fphJNQO$dk?Y-FZjU7JQafP2G@+rQ`d<%Trg1d$7jJQ@6r1-%aZ;XoL(IWno(SV^7Ibv*0Z-RzY6i zHEsd%zL(nMK_~zp0xy6<@Nw`JC<@;Lz6ouDR~?i&v<1EpJRXX}TVNEr6h00< z2W^Aj1&$5T|A>2V`uWr^ya!wsrXJzF;D~6RdQ{wi`7!EFc<>%*7koGP!wr-<{0{J$ z&7=u_7r1!~<@G({1(#lo%)@)ZXQ2}KUEob|ZiT-hPvt>R!xw_@hjzkSU>Wp0yazlJdI`P}d;oeCz8kE+5;+ueL8#yX z!u({O`T{f&z6-n?ngzcdyyR2#&+ywo-&K?eddo{sgcm7@P*(J&{lB|7C~3Smx8mQZSWqj3c42F3!V;LC;YXfAG#5~5p0IK;6vb# zpq<;Jx76UC0l-x`jRgng?GBUJrTTyTC6&HSpWPHD5%2;2Xis&|3I7 zcr(-}?!j+D&G6meh%eFh;QxPnR|4Kvb)}CjdCjJTgrq=0gg{dYjBr9oDHO+!0|6%y zUP5R)ShB6yBC_==*~DQf!rd|qiwU$%r%>d5Ph84CfD}a9LS~>K=$4P6Q$v{++LW4Y z2$a(K&wckwSIWAHcKJY%!_kanO4>;%nAi?oLzYFXKp9DQ`5Ox7y3i>ec9LE8z z8$w?K?*n}cc!T2%V@v_>g7<=M1n42e0sS@L1V05@KY{)R-T+;6H|BBhZqVv)!)_cO z^pbmED~p{%D z525bhyFlw6#`xkmp!WfL!6!hUN}!*BPlDe32*wo02R(Hk<~Z;k(4T$}b_YKR`toC_ z*Tc{O^tt`$58x+3Uws_)0#8pk=rN!ad=m7!AD~{~W1#*g(eB_4(EKFY8oUd1`#?9nhxTF~^ig0t_$27{e?(se-vxRv5C@+C{U7+F9|AuG+L-I4 zz2FVds~t{y0(=bgd%z_4Bxq5dlU@Yx0(}*j0#Er)auzu05X(WA1I|ZaH_#1*PAUZN z1-%tm1U?Qr0vrc^0`yma8~haLbwy5E3f?!r)%lvk4D$(dO|Gs_A+1-^VE&+AO&Ch^_i;(RJD$@k>>oQA`jo5*ouT^+xb zrP8RhuthfFq5N4Wzp%&YarknL z953SL;H$_U&;>JSL9>HgoijZ%e8onQw=j{PbWY|@$^5u11=dfMqjXU9R&fp|*XvN2 zM}=jYKAg_3-ZS!O26WG_mvt}7qoVpekJINcauZ0y`P6IqxQg(byG>oVEvvM)1YC5gWVoSmJY=L^PXQ!<^5KBglt!vF5GoYNwA~-fY8tHntVx9dr2$ zHrKeEGHD-fL(bRQC$hE8f?`_GQ9!Qde43Fnm(++9W9$XZ=8CuW;XgObdiB`U>CerV z?O>OO-qv<)^2z!1$)TBa*3KDp+V)~PsiTOFZ7#%5_s5b|OVOXLw&ybSGL9-n+PU^= zm5wD^|Kt4XwYF4aQkU!FM_p&C>tY?Ve0^r&bUm!`crNU;r(}NvXz@{oRwL73hc=`*4xOfW$HSs`^(`d z&vka~T3kSxvleu)li8)Uld=AbZS>D3x68w>d^=e-TOCfG&F1e%XU;!cKAl(B9OOmn=~wE17j=M>VMoUfDqw32%7u)8Me@Qvwp)9(+8S7oR$ zQzbjxb061L)z3O_sdtP*M_yrx(;?nfblcz^vMA>S^EptD!~JugO+U28u^TsfoNRoy za=E@dx9jP2eRa9cA5PyYS#LeQ)lSOJidwJhY5AU2ulE47lYX6b>HHJ6)8l93xy^UT zcO^ZJwGUgvte^GyTlCGNGW)Hyj(Q(c@3VSeWPb4+T8#Jbf;$3p)K8r1y zj-#eS=h5XaolCU`K0%fH&!O@?AE$GMR??X}&!(l@SI`L^XVJpueZJ?)}A zz3utFUX^+G6wlOFnV!aK8*BLe#N~Faw`tdG^23$I<*G5O^Q!+HZmq%EZbc3%LOY0e zWow!93uylKJeu8sagKEf=RVk!+fh$*bP*kmI4;DQfjIg51!>@?pFJ8+xFPBxvtNV#L?|!O}p<;IZKCI^+fSd%RXNl0)$Tv~TxM-cuA`kjIG#Q)uub?rp=_h;rt?Rvho&Fv&}q{q zcJq%aUs2r_tcM!os*RL=vX!CY{k3SeK4kYErgYWq$?3~%Y-80|PowkJ{tby$+h;&a8y-m- zyR|Ovt9spzgy;J4S~;gxys9(HxD9!}aS6zF*ROOYeZmK^O=4U?p zDZTajsC}DRuAf=^sM1Z@%X;0~M^rq!{=n^DV(F9mn72!#%D2|1 zOnZJR)1Hs5`ssbvs;hoYw{bRJ)lKQ5+DEmo3iG^ScfZUgXT9`$Ip=R@E8TXi%MMHb zW&2s*bCj-!qk8|~K6w3M8q&@XGoEML4yosdw#kK0j;l)T_GKWfrX3$4> z7UMozL<>9k{Q&EqIg8To44lV2=rpTCqy~*YAn5`8@`|S2p7}bAFGphUezv zxgUK3znK(ZZC}iToruT!@Z6}VH66=)a9!2MZr-xiUF9{aAa7Plkwfa85dDPvPl-+c z;kZ?nxYjk5J~{5K{0mafW5D|UE$*E*Yj(%Zl+RH%>vPHmT)vtw*$#H^);-!> z)T7NsM>^h>o%Mdm{f*Pt+dNz9@mS9?#MNagKizgpW^Fem=em_x#=SMJT^!caS`PPL zUB+?p^D_G~%NTb0E8FvR@h*b~%HzNqut;2BG& z@@eK9*t_x;_PF4z3!i=AGctUZhR>$(85TZg!sk)=JgjjNK2+@{v3Hcu^zyeHc+WrY z-REyP@Sa}YW6J06`8+BoFD57%HJ1=ZH5eX;yuv35102z^8QHP zGtPU+d5<`sW#qGse2$UNJG$zi&*g}NG`wG$_jdESb3TX8XU=&~H}Bt$<)RFviG%W) zM&29Fd%}4SH}C1@Z%XifVm^n>d!cz>HJ@+h^B4T>3I0Zc8|}j9sQEh$G05WppTpp9 zCh)fycn>e{-Q~ToybqW6TDt)c^5wnFya(C?+6Bscqj`^W7vKT!1$cio?=$9o$Gm^o z3-I?X_;~{RMR*T9e@}$J=fU3q;qQj<_dNI;Ap9*4{{9Dl|AEi9^LIoHKdvDS z?~&)d@w_LVzmMVq+#ko@uq5__-G=&MT=Cvm-s8%9UU?5JpAq1*0lYVszt_Rv*WmAM z@b@=L0XN_Q`1>78k(c`!jBCW@GirQ(Z3^T6T_FFRe3}Ow2b>0+16%}b0$PCUfm?yQ zfct>&0?z=?1HS>@1!n#}pH2bJ0jhu|;2PjxfjfXP-~r$%;6>mNko#^v%>hmXmI14Q zjX*OH1-=N}1`GiA1CIg+fR}+k0L6dErv<=CfCu;_Pzh`V8i6SAMPMf|0z3%(5SRr1 z7btoU>4B4hvw#ZVGN1+M1a1X-fO~*Pfu8~|1MdI@f6S+&05@<3a6aG#>VPP49dHZK z4crHOA9xyg9(Wx<4s<+lCQuGk0vmxXz_maZ&{BRa1hALDZo@zKpzFp18RXL z;96h@FaYcUo&jD2-URYT z5Cv`kx`9!EpK5S|n4E;?9rT|JydU2deC=w`YFG(^KRLZdWBwfXe3&S(sUs50DCd8UV56JI9zwy@+@Xwnr*+J0rp za+bp%rijnsws1PMtR(a5vJ&$u`wm*w&;VCJa6AuB@y+2zI5UH=d~HRgzrH36&)n=l zDMQBDia5=IhAr%rFC8-27yasB1g?L=k!_|t6!5pU8xMT{_g~7RUTc8}?;=(PK;=~m@S;eNcYb^5iNCXN%xMA~Vc+fC)ObPW$m_qjC zDAX~7rYAE^kkW58T+|8Ybs{>vW%=P6A+vBP6nO}rjhv4Zay}`U=|zgK3a+BV)N_r$ zql`VPm&2=)*=9;oQ%D&k%5($YGr!mz)Yl4ALBiE&7n_;$$kgSIz zDp4^J^7^CE@-W;?rA6#2*djvzN?*S;*w&nx2}?4gus20Lk5E8M0cTiYnVoVV%mzxi zBQ^uAjqGHtTt;kd6zZCxPPv@@W5s2WVRUOX`NI+_JKg7O1jQ(u+Kz2w{>WAb(xK=Ut?#J z8DV&m)Wa}yWiSebRFk1#DXVC0lcN^0+SZoo1xx>$s%+u2FO@mZ6y@b>YiiK%mWe33 zWO=5fs_UC?}mNoN|h(1X}VY4D~=HJr82) zf{WZhYFJbS*sZE%mQxv~tgH*9mEp3{GVP@#jcPh&3GUqNY7n0NsvDXE^2UJ+nO28D z+}$pOD_VHv6^66O)Qu0~^rR^Q+O0u`<=p|H)FcAFy1jl{shIhYF&vYo3zZ%mEvjTn zHD$ycs69ZSpmswWhJsC7lD(sHNSSe~zkU@v-QBQxb+}#KxG}9L>6%d3Z;l;JSQ&3dn1< ztyP#pGW%(5Ybe;dC9}C|Tcdj0Z&Y_oQNL6u^ZuE3Gs=3Ueb}36Qf(tON%@#IFI)6f zu01&?$*X=KI)Qc45yEnQN*39fL7PcPT*$1d5Sd;~wFyU;vTo^Y)ijtP$&8}La5_rr zI-cmoqrSLwS$TbVB=gB%h}!sNfDlzMCCjOf?NHVp48eJ`m|&_+k*M)H;lxxEV6qFr z$ETD;`1yTRYq-@M$|9@Pm^MTgF+=7wU#C$s8b1hfO77)m zl%Rb4E88X>BU8c+5!LrJP0+C_I)a;pL}sA+nhd7z%u0X#Fw^Ew1(pHMOQSue%&%#s;j7%wvgw|QnH zmgsTBtzJ}JJah=vR%=AkoT_NcjNk1d0A!(3&I{lk^QqoyVB@&y)0cNzagUwWOCzdWEDhNpF{Qm!$h7{gI@vN&1eYvyU~)J5JJ- zl3pa~XCw_t+9|2B?aeZLhomEtJ|O9nl0GNtFC~3N(sv}yJEaYR23Erhc)%Z;XD?#|Z3ro#dma>TH2RV4p zDmQ;!;bmnk9MO~0WosMpOL;nGO*7PLgpmHoQdUpAN4jzm;#F1iCloq~!&ne%4`ET& zTr|SomnCVbSx?krBgOy?*Sdf<7WCb^%nig;47?a8b@pW&X~Q%hGbc(S{!|u)f_Ez?(o3%PPa+ zE$xPiZ2o>gF21rc7-?(whiY55;?)~FT%6Tr%Xs-GLKI4Ov81-OS*-XqR&+E33@#9A z@Z~XQbtn)p=mBRIvA)1}1OjZ+4*^w6KiNzOTr1kLKj$diRt$_|Kk5?lU4A+}Z-TBw=x|aI7 zhV}@2nWJ^_W?6@Kul6WvVfr?Qa{{XKw?v!jL~{J5T!$A`tXSgrV^dU_Qx`-Rf*D%q z-kdtDnrxv!Zk;Ue&Rov$3cQX^fNR|<-aE0k>1;<`d#i|B>!`aj+N$J5PJcZw0=k@d z@op`lqd>z!_=|DYM+5#yLo+ROqF*5;{PQ?B%VcMPYj10y6@o_T9H)3qrgG=zREZVf zdGVO&B4-muc`LlTY;p#pA`5D9B1?Y=Z-p$6BGlT%TDLjnn>AhSl<(Dajo|QBP1iEl z623A(*D;5hV(d9T8|50@=#2P-_=)%?Q0`N=IMoaF*PMuG7Dr!qvNwBw2p-~{rYf7M z-x+N~P0{NH1P3)}NN`-{D05=5fM^%<_<51&Tg?#rQ&CY~)r<-B?`rH-?!!}iBcr&_gw7D*o4C6zjlX6}qkQpM6o6KuGeb+VP zAI}RnYqE%cYh5F+7vb*~O&-NBbXXt8>K^tLDtQ$3s%s0^VZv_nqr2d5hj|UQgF>Nj zBx?8@xE*dw%VA*taXyNDBtlP)`&mp}!8X)sr<8GiT9vTd#EdKCT9v+`A4B zIVo#5#1A2LZT#~*6z?k3wyAMU|@QxsV?TuELVqnbJ63r1?t%S#w7{{o~5`+#x^s`}?tg z>ma_OIQ`Gl{X0{x==3NbNdBHIQ2M%PZ=a+$KKq&odpxH6@2RT)kafWshZj+Ccia@jr-!w@s4;b-WA^&ABs=J6Y>4=1M$iDRQyo9u-nz`?q1rxvb(g~+r6o~x!dTD zb#L$9*&Xkm=-$)4zuVp8?TPhF^i1}+dP{qa-gs{kn`J$HzP_%$MBh}OyWiU%>!0YK z>~{^64j2RRfh4xkdIo)iU4x0isX_OUcPKVAF*G^k8ZI3+hU3FYY_Ro=_(r-$5+hS1 z?osb(Y;lycrca0~;r^em8yt`t%CU#Bka_uhNZS0QkPVOeR z6Z>%ShdTODuLSDihW;_=JlXB)DeW-F^ddb@fPy;HsJK5t*FZ=!Fq&(&Yr zZ}i9ehx(J)^6MG!4Rj482BrqwgWkc|;KbnMplhgf$QX(bC9xUUGwd7g8cqyP4ZBCY zBe9W*k;xI)Xz8di8XrxL9>7Ln&zNtlYb-G~HRc}oj>pC)#wW*JyGnN%yW+c&*h1{t z?c3e8JF$CeH+h`c$INZxMSD!34P3Ch0b3`r3E9)*>*?xA^i1`*d%eA}-ihAHURPgf zpV1fZOJaMnr{CA#)t~5}>UR%#2Vw&g1Cs-;!O}rvFg}>X#%0ftZ>Vc10ZY@cdw3}{ zpMc(E;CsC&(>D^=Yz=`cAA7=~i>x)*gFHAR0vTnrpRhO%oaAE_ToY1EHYMRx3~K)7nQ{tlAJj?QVEkz_%n6MX1V);tY{D(GY^Lzwfy-yLpj5kNy4i z`|SsEXYT8{=bn4cx#ymHr|c(nF1O3&^5B0w?s7FCq+gNv`@jFGM)DQ$Ak2rdrw;1sbh!;tA4GrEmFNlPxag2rl5hFr_(&guMl}{Zy?cU(M6h|;* zAOqFu>7KF3RUR2S+s;_G80lW5hYWgbz?*A4E;YPgWhr>Mgxx!s7}@9Zuv5_T;;XCgT~RHWaB0^J{(!(P#Tid!dTVe*9ky?a%PbYiX?}=g(%*e za(#|8f)A0Ihzz$?^`e%Rx>cS!5d~BZ+(v@^%b2-|h*e_;<4t<%{l`5n8(QGBvkUT| z5c0TyCTnm!9-p3g*Z6e|l?8Zuwz-aB)POy)9uV(F7&v}9K^?Z6E3W`ktz@Jxm-zV@&eBf zBUiXZWpA-l&bgBX4qh4R~4V@Z7L=Oj725wYg4 zmW%f6`~%TmIKsA9EklN?rTHzWiRwB3l-rejaUoOkW%pO{IKda5O2aucF`h{XcB5qC zg>5(gfb8Ljkj}F2r1d=%68K4EF`q?#fF4fbx-925eY>(PpjMVz?u5lTjcN;2ziZ~hBxFdr3n?+_~vp%X#C|O5jC{7-GYNWNC*}3q)U~Qxr>+uS z6I@NXTe)XTooWm$>-W7D~9r#Ol=fcC`mW3ac0ez49d3l;2oNJWA z)pUgyWgsHc&nIWGxAg-T^dlF-JLmnKMWfcB(9WtCkaOXm{NeozfA5ptEj+#8w?1ia zVdH|;KDN)tcFTjR(WDDCT@~IL%u@JdFSx|=M**k8%dX7trU=0=-$NM!(QkUh+I1)QVktqZFv9%wtV~iuuFJD()-*S(jBPBc!J0 zcCDhxD3MrW^yna|vAF{^WVz%gA_y~Fiu}Y@-{1py_9mVSKTzbSx2p1bixP%c78S`) zZX0YCzE>najZi7vEkE5j7*nYuAg^x;3?HY;Pd1jx>vs=sDjPno94~{L2<*_cpeeaN z0w#B5L_d&Xt;FCeT**=^TGWaiXrLJsRGtPwGJKpD#pLx@{jG4X{B&e+W4;X?pd8%P z`nqbQ<{}$A<>SL@)rv-+y#92c;y7wB1rA6Q`-}%9AfdTKX+E!3bOb8)Ah|=paSF-) z{EzeZYsP}dZSk)WBN=U^UvI9PDdd+NiXxXrd<0bnm@*6hGvp;pDHc6tl|`zwP0j7_ zvq$pqmZeIKsNByghXvStHNeJs@mzrC@~YmN)Q-|Q3a4Qlq405O3cu4+#_pYrB7*AV zr6DkT>o&p&b-57(kV6B|2%PTl4F*~RljSF)gLe&Xl)%rImxawTi=zTgk9sJsb?tTuGcP8+G`F>8I`|nC*N>)5 zXCp6IG#jSVFDajdz6hYfy@N8Rc@Vrrjg`#8*wFliKB)4*Ec1?2ZddE4cK_ti6O@P< z6ZCnKDSa4NzX2xlOig>aTib2TW(iqna^sV2u>B7BMP2spUd4t!l!HChbsBct)||*@jn_ygr&NUW<3u-i!)F zT#PDMhd5NA=C-RW2C20J&8zOs5eiVxJg&bfaxBQ6#iED+;HxnrSP~RQ*$(+>Uv>q6 zL_(1s$p8n((=_M@$P&;O7J=K2#v^nMAIX-7@vL&YA83oZuJTv239bMu&BBTSvD7r) zy!IQxgSQ;MAbXm^>q)5&#FkLE>Brh{1fr@JWLLOkf2{DNJm#dTZzi<@N>E`iyGUMk z&O<`u^=d>FF32u={7!cM#+lhgMQz)l7>-K?a5^DgNbP`Bn#D{)kWRy(u0@0w|8oLd zGzpzR4h=^cMP5G?QnpB~IHpQwfQeLU@9}#SK5-tDrHWkvX-rmg`^D;jekMf&Y&rD; z{VLMfDb}vsxP)NLy`Zo;844=}-z!~^+k~fdB|fo;ZEx)(4=QqrC5%lxdPEwoM^Hu% z&B2NbgIKeb=&hSb2I{BeVsunI%n(S%0~j>$i-&oHT5BCRWI})O@#kwXO1|OG*CCLN z?;|Zxu}xvSHTFvObEsZ5hJ+EgKw-xyB=UkT3FQogfbO!G^%xbk<+a{^z49t43yb=K z-|Fp`DDpE~{o!K^D>Odvorj>p7^NN|;h)N`LpFt-C5<#sVG&U0YQ*^1v}~^uzYKJf zc+DXV#|QYqJ|<*?muT6lf|W2&eHt~!Gkn~xta@RJOAdbpXpqeZ_2Os$rZu~bWRs{U za~4(fjoR!ZvUY7V7(fk&9!BTbSwB08?ukB$R^nitsYj4TZ#jMp{nz^v&q%Ic6n&ed z>f6Bjf#bA*9?M7$%>ba)$A3%I>+lhWtElX_>VA1Ia3|OIlIs^rVEP+;tkGu-8yP+1 z0rBpJ9-&Dc`etHGQou;Rl$Hm1!FxF;!dIdP+)xyvh?`ti5z*XeTVqiz!5%ox(dx$v zz#@QoT4I#T;mbfNVzkNDAg{<0uLG1z@Wq3K0VsA;vM2jN z0yJoNv`1_WjhKcJ+qrNM@|r#J3S@RI5PBC4Amcm8*ahG54C^&JVa`mawIq=tTaPiB zE%N*?W0DwQYdw0Bm@hW(2`|EG&1NJTXoe=XYO{7C&>3Q4Xt_}+KIS=#7GJMsuR|U# z*o?;FM&>rWV*S{zp7}_{6o8uN7Fbr@6S8NS+fj(G5)4jP@&uu2Kv#=rrn5DIE00;Pcn(e$hUcq`Eyu}!NP54Qf}*q#b} z{MW?0AR1NnE*1gy`bstaOiY26z60)cyYvH+zL_GV;9#`!m-C{P*AOTTw2A~F4l#d& zbv{_b5D@)buD?pfjm-xTY|O-;)9QaSA$qy~8Su!2c;k8o<^fjYI*HKWRVvpBXqB&8 zhde6N?O>IN1T2#Pi(R!*E)8E5L0+Nbu~pPuFfXw%+A_V4*NA3nNQ&|rYKGNNBZ(~5 z8)xG2m;e*8$!I8xBwEpSZyANwP8FQknB=Bt<(s(RNSaE+*tY zTSa1FVK2rhBS-l#6<=0o#BEVYBqqs+TG`7#5AIWd?^IxR19sY1U*k5rML(7N+kzVZ8 z+izFov0G7xy1lkIj%-+M#ur`#QPAA3M9*R^A5Znk+78GjUv9fn7**sk(QssYvE-7+ zY*QdWRlU(uTl^Jar)q6L-;zd}by?wQIeZUPX;Q8`ZF*t>9}{>5kgoil01m>Q+j4tX z?hYGO(1BJFcA3EJyrBS(k%aBUv{=n0*R!KMV(IU^caBW!c9Qp)ou^?V-P8*$Vs@IJ z-34U1#R6WeCrH1~<25vQHltC(-BlVdE-wR;dVxBWcoW-;UgX_nuRqk9s6C@5z#8^Xi0Qyz zCIa&3xA}~TlFu0Nccfq?8aFXs|CMcuzC8s3 zsI9D`Ef77Dq8V3j1rijwKGSV@ZZJGxY1@?Ou|bNo4Qtl2iep%>SqaTg4qXpkCU1DG zSl&=lgr#hInXyd12N=}cS~m0^egLz&OtQ+PQvvC0pm3+Ww2-=jS&sx^C{tJq`+Ss< zUJyOvhRD<^-Ub(#g;cEq_C{Wfr&E4))tR1ZC12{`{Q*V|0q< zo|5e?3%4PCEhWhQH_D{bKK?TGR%4u)3xd6P^M~8y@b7>$km4Yc!fX|Z_ke!*0DGC( zejsO-1vM4&%M zfstBDa*^q4>8(P{@Nfi*YD6A;6qZLY&q#`o30>Q|9>Tv&Ity&jfLY^(g29P!H0Ux= zg8`#3k(kmUlJsO8rx}31AO4%XjBxXY^2Z*)1U2>;)#b;n523ptTVvO3VUbM^-;O-UO6Dhsln8p@;K#?dML+RaSE6h;dqWTY0R?>{ z(Wj5EG!X>Y+p4it#bm=$Q8nh~sKz9ZW-QI7=||&_)XC0sfxLVg)@~fO2EEbCiVtXo zja8?R*$1*u>c<==2|Jk=x3l7tl&MwWPf}}szJ!Etfd7sr1#2?W_s|#!Z48`;8qCAW zt{RD|glCoQ2)LKmQ4#l&S_F_Z#0`olrz$Upo{s^YK!w1vCZz@VkJAuBq0dm+8rm&Z zITYzN1$a`bUq6W&ur^ynZ#E<(9$QceUWqdr<*;B0NNFvWCog*oX>xtJT-hSw$0lX5 zHEWTNt;xb)e|{XVGy=v=bG{_fx@qjsJg(MnE8!&`(25++0AjF0fKc1w4e0TV;E%^t zOnc2$BG-q0bc%WYShwBt{n2t5*DYzJ87 zllIE!u*c7$&I0LuERK}uK~Gu5&a#UA=q8wcnfrIdUdI@j;D}|cxy=3K4!oDSmlJ1g z?TxXg`pJmHFM-un)wg@qwVJe7WoarOW9l6sCN-_jXb+fTZb zj2?>(hep(+ccjtcJ3Xc9EilH(-HZSboKF$~pl{S)r*AZ9pl~@n61~^YCI$_N`t%-q z(AX&@p4l{A(O;*b!YEt-_X)5MK!IO;j=iz{%Bw&mQ2WCtrh*c$h5ax|jBAKe^(|6B z-v;q;E(2C#VqFyzp2oWG0DFJ;0af}uL3}$we8s2&gr{MfC8Kp)LjMIc0VH6|Eg$hK zycgQ<4h>jmP;IBZ6CK)!S>%#^&DP`8AWuDu-ViOb_fg5eh}khqiC4X*=Qb3-+()s0F07aGK`4}cKi`VhQ1p#=s9@>R4smmdKN zS4W&Wg}t0=PtX_YXLkL|Mg6k@k2#6zuNU3@E26Ccccbq zV!>0hmFlyZAa*!bim~H01c92{lo&MwHZNhkRIweLXEs5)>g~PRmf%BRi=lk*5&d>} zB&0#Jj`hZ@cD4Q?)|)`;gx|;4(8#L%8BzC*&)6+(An>8%$f4(vUmgAoO(R*)#!CZL z&>cX2#mlMGzp$5>5nt-mK{W~tU{(q$%Y{$Kg+B6&m0V{K&QSS8sA@2!;X#z1hX<5ion1{x;}cQAYOxUkqYojC zds2W(Qs%in5AS#?Fz=Zluo}7wz!H|_FJbcBO#R2$eMgL4FZITyVyuQQ6$HV=V9HBU z#gGlW`ZJmv{p%4Z4R4~L+4>j^W1nIk+W7bJXZ|fcsr+FWIA9vP!Wm2oqNZELT1?-9 z7k-5x7pqP1YU-II_{=9h6aF!wR1lwS`HBg|Qx;*vB8`ZNA(o9SWP;LvEy-Ju-it&t z-0see3ECtgQTaV^P->F(OS`oF2(`U|CYCdr6|0C$rZe>dMc*==rDL2(wy=^6TjsD5 ztOsF3MvRvpCgUN89;V_UPp~vn8fU0R<`$Lxk_byR7K;Gd_$*s^2{ULpYIKH_m7`K; zNLjhpAy$nXUc>-{s?@bmmz?oKYXwYeX2XQ4fz?GFEtd_3hPS0F{Og#GBT%@Q`_ z$z?G}IGg|3@QZng#~CmxE~NpL!;Q#i8Uesg6R$Q(2wh#poI^ zQb(>bgo`433Fj8@*nV1SHyWFBEtu|WumXd=K0u%}5Sf~MKJi{rieEwQg61>g|c@xD4SVVK%^Ca1_#+DL9)&K#(Df6;l+AM4a%JFMnOlAA@L+8QY z<OPXS2gNJ{^KUH{j4=)tp~iY99x0!%>E=d#A)SvA%RHp@<_?5OF(z!O9M z6O#EgY_ERcyxyLQ9Z2e(Gi`4~DTnc@41)iVc}cBZDh*I{DHR%kz6iE{A2sBFL}Yab zRY8u4)@VG@e!emA&z}l>>_p(u#N4?_nozkQ0Dgrq8pL{ouhZP$+>Xwy`HX-Q!Xkj> zARn1$9@|fRgl%EHRVu0oX3G0yj>{&Y+&|M!c&3qXD41f>#2L!8RNZ z2{;}=s(AwYmQdQ{&^F3D{2Agjb0}-u5drdjBI|>cbt|&!|ENU70yU%1g|4W%jo!(J%gVzOWg-1q4xL63dnz|j=dB0~@?Faf1g>qA_7hLE zkTAnXh2pd^RzlcrHSSF*egA-6Y{zGb++zNJ4C^niM1P$gEg3k)3#nRX^AHxUTb25IJ(7 zAki@W%tlNVQ7`Sz?I|Wve9(M+B{GpIxC3vh?E6w>kEWTQ!WUW{xA$@?dk@{;+ z#Tp&2ThPV_`8&-hjS%(^np=-|>bG6jYmcg&(QGFlC>h3bJR$L_HkVw#y*}IK*mC4h<7{1uMK!JYeBKE`V4=%AqU81JrPmxMZ*ik(aig9Aqz` zBJ4Lu5K#OHgsT2(_6~&LYJYWS>e^F832MN{8f;9zXk+?0!nBW7pG2Us z=UgbSv06er2IC6^Dr-m+^L4El23Bh#lGS}Bl3vWBB>ijNrl4og?h(5e*eIZu>8IjZ zblQ0q_`oxwBM9i1-$tH)Z~(;O35#xW0{jy6U#I+|A5tv~&$d3Ne>MY1qmjcBYcdt3 zwN`oJL8S*Eu891a1Y@C<0==w5f-o`Td99rZN^MAZxlp{2?}R~W+Ze&oi6BHlm=*fv!8^E7`k6D~$Pfy2neoc) zaTzkE=7{SgNxf6%`-+fAbPQv&#*UH`21L^M9fBnhMCK2~GpbS9^8!z-U1Kj(2Q<3_ z5I@)#qc*Mngcf7qunz^&z60DT4VwvRDGxykW>G4np#K=!?uK-1iLy`RkPh%Q{uf#S zSab0#_IGXn&8h*3;TM~^wtS$mH^~D>EPTD@Q&{MM3dnfwrLDP~s&^9fP&Lw~1wiT2 zhU)_VT&Mob{v)6lxF@T>NI@XRDYwx)iz@9Q$h*tZ1eL*!fJ{EE4Y0=&TEJ|lCu}ys zDSBbboJnxxOe5fW#i%_YcX}(1cm)AoK{l>lyd0j|mzE*hAU-ZfVV7;8Xyl`@M41+P z7UfSn_AAWyKX;XfWG|ayLohK3!6<^juffZgsu-c@xAmR-eF7#GUaBmG!~*Q_#b}$D zuXs*Vm{bO_N%2_O7<** zXr3Gr#yQ83C5NifAp+~M1X!~PtT{7#fQ5G9sceIVXK#SO`Z$QarsA9c^JJ^xV>ax} zPtqaS3-G3~-q0z;V;<{8!k=P?F?XUvBb*K;BwLsMK%M~ug+6{MtW{O{w2}iQt;_+^ zHCB@+0#<-PWi?&|VwP>`l!vFc*mm8--yZUCvdS;xccul{J1Tz!3-U@3<-Iw6J~u;N z|C21~=%63W=Y01k-6BxKDCRFtLJt5R&rdR6Itv8xZAIu0*?l;{35BmFYk z1eD$mRE!;_N^b?EH;r`cRUzsPU*Vam=cM@X1=(8gY5;;Q$R1lN3H?Mgjy7`8yh?2W z24RCcMPLXJ;!Ulu=EqxK67s~y0~weZewOCr<0b>=!J9yhH)<7q;8LsQ_VsZ_lmgQA zNxR(RGKR0Dd0v&~%iWdRsIZLFTNK@rP`q`IsITi;9oVQz&_L&f04E$4$RRrVr12Xx z1C}fm2V)BOo#}plpDSQIo}uVp^(m59!x82y4@~5JwwZThQe&&jk8=jt3N6bhsy;9I zK;*;9uH3Kahur}UYL6rsjD)7t#NbWgwa#8Qx;WR z98fxN(%)x?fAAarT2C?IMATBaWzlCf>lfT}`ipMnIrA63u|UJMr8w5H&%r<<$=P4wcR~f>FM^Ajk3}JfVmdw34+y2b zl_b19<|~S&`1rkPTE!#j0rnQ3oX2N?Zf0cwFaJ`Sze4aC97?7Zh)FvcbN86)o{?2n z@v-Kf>c!ar)`(Hc!JL&87E_`p2Kl6R#0+6g%?q-J00At9NGaAFhdb^q*wa?{9eI3= zw~U=c-S6T5I|^-KSF{A&cVHYa8{ao$5uDS)WX!2*hJV*2tpZi$@3-ln-!Y7j$%fE| zSF61K4ZEOM6tv9cD2N7-1M}0#fjvn(Qw}m|(m}HlnF`NU{T)n!=6N?gV@nVG%oE2S zRtv=!_zCc;tN?$|tH2@x$9EvFjNb<*hIv3td6ti3E(*8n3w%Do7v z#G9z~MNet$)$9o1M8g_?!FfCa7M%y)P_DS2s79hHol=HBLCj8GMn}Sx{Iusl+^Gl|J^8sAV2vqEa9mG8NT4y%AYk(c3VD3V+K9c~a6S-yV zNPwNN{(;Ay{2!|e%-sM8?bo&#ct@+KOy`vun6N62IF>^To|*w)1$cXrlHda;&&h`^ zVjmomKm_Jgv_w{zir$c_=xm?@6E`453y)Xr6AVb~0*VvbN&J!eau^kTk_gR{7%6#h$)nvc_&`bvy+U&VDcQTBiSdW3{^#AmyV3to2$Y72&~eO3 zKZ6OP&c<)|^_Ys&Pzw7e9|t-Awx7RF+a^9fBa5f0#*7S~bO^XU8mKr=9*vMd-~$pK z^s{~B)xPW>>1REpD&{GWw!Sn(zu23?(IA7j{G>1Y_A$ngLF89J zT62C|z<9kJDVs@1N}mrePkVeK*>_=FntY2J<^VXp=11xR{K+~hFU0VKF!+5$8oXO6 zj4k?vqz%TEM9nt1k5Dt=$f6-Qu;LByUVvTHy5KKB$&)QMN)RXwe?UglcP~)#tD1Av zdes1UeRmPeVostfx4VKzAeiRg?m_z#vVWxDaD$eO!+oG~YzV=vBZjltq)z{D@+XPk zxBT27ApQLBgl5bI2gh)2R4dL3r_lt8p%=h~R5k9Ac!4qYED%W;yqPxKSG?_@?=?c7 z@(&W^MW|0;?0-RHW*wkgw!KHy(!`fug zEqoGYR&SqlRLmH8*@GnVjDd4(AeJIf8Xh4avH^rOmQv9hDxNsw;RrsHf)cNZ7E}KF3cl;-vB$w_9@IF>UE*7AP_v_ zG@mbb3r?m<+s*qCE5*>Ue~R`JH0;bDy7vTrpRjBTnTfUVWt#CznlnD=Vm!lq41Kbt z4$J{Xu7rH@2}KZxRo>&{z~}>68XRR5(7ibd1^9SuGmrK*U(k#dMDduvY@3;vOo1d` zLBx)D^IM3829^*^)cb!oznt@=q}^kU$K5x*fO{%ut z17-P z&FB4)GD`CW!*>&$;`d{bqp_!i#TG{ke5mvV)Pn_~4~5p@F<^K`t8AID8&I=?(`~oRTB+d^z5Vh(pp?VLz5qy_A|m&`|}*lxNPpp4@}&PM{{p zO-{%lEq<~O8gefMQ!V`CyH@-5cZqvD9vepLGqm@>1c`$CPy%%+_<(4c z#t|K%sfkeq%b$nF(Qn{~8W8A7v`7#Us+?9y5Q&_$G{`e2qg6QlOLl8C3p(`?F+Hqa zu*^fn^*O|N6i}c*6AZ>l@IDUSW=}PF39i8*B8JBps?yJ=%Ap)Qpujz3yvBa%7x6fV z8Z?2eUg!^^*5DK7EC?36y(a;R-5$+qkT*8D={}+a%^$(Dp!pBz!KV2oVn64vMC(3> z%zgZiG|t%Opn!fpW9CgbVp}ZvLHUX?fk^y3kT44b56L`htdYKmmU#|sTYIPsA2S)i z-y+Pu&R}4Nst@>-R`F1}VpK`Z7ZgLQB4e4^?{9*@lhnQQ93iPBjZTwDFonU%M>>fB zM3}n16M^QlKa*V6-!T;sKN5Iy?l!FeMA_DCZ$8{MNC zv6fzzU5!dqX-9GvuXc|86MLXZfx2j(&@4eCVqSw)ASqol(leko%}UG*gaRZ76c`f- z80bT$&w)c!?+$oVr($Vq*7EG>cG)lB+t%Q$_`J1UA-~>N(2U3C!9IaKT4gho26(!*00b;qW!f{(Lyi*pbxlqO<>&Ye z4^BmlObg@WmTw2%@-^euzo65aaor!c0yBg;98Ou}m&ejd%`dBs`q@QL{zqb+*UQHi ze+&@)Y_AW8M4fbzxWVH?qKQOQTG*q8L~*|qL8i~_Ot}}!glhbik+*Q%R*AO5_THX` zqp6V>t5EDDij^83Dpuu_$3~piVSOHws2`Bxtm_-$oybnQks_;D1n-1nY`VsN*^Zci zj$3K;#;gFW408B=;;ecPVM)0wngNr^XjJ&>zyF{w%sm-5^tF6EiUqWLYj zl;=6z$@AaAKKycag=pcqlwdkgcR9RKuK?0go|A&TK?RrBdak$|H}%w~e({E=-GhdX z;*qMXRoo4O&`9vVZ-7+daDJVUxbHX#Mc- z^m*Lf#ut-!EUEJl!D3}@TonePk|GBw(WIu5_iEA$pc=^{XgWMOx&$NsocL3 zIisymst7X*w5W~OPZn8R61is zka>ykVwDV2SN<_rQVKM7LWP2eOWb-Z8-IfON#`&!@xOoTcHEmMueSoyp8S@8^j7N- zfSlh#pkmXZKK&X%_lyIbv8e}#IGW6D4m_7999m&xnz&J?(qcN;l( z<0iDgZqrw|<$jV|s!tmfhn@5C&D80s|^l&#AX`qw4c5S2rJARvu# z@Nb@&HXE)Cm#TWSx5_TT5v?p$-lawl7O2sqX= z>C^`Pw_`q%Z&rYv7dWB2Jn|3^M1fL(Bv=K3uiDH4cnM>ASYv?m#QK!nM~Ukmc4Hxr zrpRrb*qwD15f=Pi``;TSQXN=~Kxq)iu0(-fl_8n~V9HD`&A4p?cbT1OaZk()>^`97 zMpWFnlOJIdGuiI^7V9I-G$@jpXhf;p_Z0f?5EjlFqN1*ZH4X65DB;>dK~SlsH_^uJ zz_AE0i?aAtzd>?t6bK;)raO^6dbqb!UH#YSv>Xi}KZB83?^rk&*Dv({a)_YN3kX01 zmnuB74m1Ez#oH)w zGkXcQxNz=&P_=#Us2utQ;lsc|+rm;{=T`!5Fu%s$d?C7jxgbe-hcOoTG1IW>El~S3 z3CxscSr0)mf=DI8Yr^Ccgojm-Gx@09E!LZ8i{G88G|=HIB0qWkUWZud2`qTgI&E-^%2pJu4GM1%N}(2AZi7toFgjl zNrw?23dCp89Z46RTw;_2m$AlR0w(bJcsG2C6YBh%;!`;2!fENB@stERu;ydtlDlxk zjOM3W73(dkQ`|c%hh88|IpaTjDt4K^;n=@HV}CKG z(+LMr86fZFKz^z7-gZIs&I+Rju(qGSN*u2LJOnm}Gykp(i=HO>F|SKMEIXkiQYP zv96{5(DXKF zro?_m_x-j4tcqFy0(6bfzl(X!-ovVdR3%y;+Ny?;dfx_AlN+NAA?$(va3f`e)bql} zyPbMV5>PX$K2nWgIaqqM-r!>ukomZ1mzd%u5HRri@+{3A?PVpI@PfJvXO?kp`Fy|N zgIF454}~Qc+jF(} z@(II&l+>T`X|snq>JP{9EY?ruqkCvT5QNlKHrgxvW(kU0&w)JgzDH17|JNIcm*32%69nEQ4s&8wB#OEOlIuE4BsLwm|fgR5CS5O{0y> z>M~K(c@y+E+rAmVTiI7FYSx(h-&raqocv@>uC z0tk~lp7~O4iIRa0F{BtRSscP<~&cvbH4NJ#q+Js zb585+KC}qWDQb~)@qS35-A1_H^_TISJKkH&)BnasXVMy*7QOlf9G=fcTkK0{kg&eN zy{JmEiSp4*wPL%%z6ex!7OUiNa~uNr(^OT$U5>8`bkWj){KY$at`xp2>vKRe*iuxm zYXsF|JOuL*Ef)k;l4UdJ@tF#H*P4i2)LIIL9#h~^Oab6BBG={$MT4fmdn_8*eZpUO zK^EJ0)H@i8;3tK-rNK(;755m-y_WRia`KFvjGc3II9(daJ$f1Y$cIUny8}o6Xwgsh zO)Q}L;e-M`8T~)Q${n^arP;)aooxf6E+xnFy-3xJtH#N-pF)^w7*%U9K*ITtS2K`= z$qlle(amWjq2CXH%YqzQO``ikoyfJL#oD6#Pfr-Lpt-#R7OTL^H$z983^xv}ZELy1}flMi4Q!)7MC36rh< z!uRFHATRV`G$<2pcV`#Qy$pAFWL`3or>~&c+$La)4uT5u0HxpI!Qkvl)W~U4+w6&I zG~rz*FZQ9oqDI_hL0nJN*b74d!#VKp)TnF(HeGT!UGRn2<<>7~{*qHLosXV+Moem= zBykOj^#Vi%HQ%di^AnQIcj*wVA-+k6ZbCkw=)vAVk%b$c1d8-zjm^{{%U}4Gy!f$H zs__9V6&3yb!np&n0RbeXqf0~3r3X4m>VEXxUwP~qbSzQf``EDRj`I)X#czT=P(f6r zY((W`D_STorBeZf{qDFDZsxQf$UdjB7uR5jd8F<>qT2HaTmv)cSt0Y?Dy=dGqgGqy zj|a_NhOQ>%K3wy`n7Xerh}(|O(jx^JZEKa#W9)i7-Re0iCIDs)tyV-m0eJ_lRszt* z1AQWxx*Dj~u1AA^UKHj5rErhDm>4Vd7?-C*EV5?312(35&n0t;G4W>qL$K^22$Y5n z5ii!@H*_{z@x()dOH@Sqce#bRGQmG5Vg3<4@p?DtpJP4jr!OQVB*YP7;`a& ze6oK>_*lXjN?xJ#$D{@Iq)qp;escZI@SdST-#PEGPJUImXLcD4bcDuP285YI6`sBx zjM8C}`=J9_eSjd?U(grwy>fWkCuO;&BJP?a6aWtEa&RnNckZp zH^OZS1JHuN7MAwxYy2Te%mMbyQ$SY2-b~XEhQ!X<|2txAV)l2Le)B;i&g|dR2V*Jt zio*qH$~atrxG-kl%z>DL>&?V$xzXWJ)_r*RCjGH~BcQ8BL*FPr_5X+{g8nC%&FRm< zZ0J1rc!$}Lu^sjfJH5!cY>S9+r=63803oM{2+<}&t3T7_p{yUN(Q6mcU#RJU)Ylgk_ zXs{Ow&B=v=JprP((FAbY6W|r{{tg}#8!g$RtKE^Ko^KQlS%t@k< zGu1jknIw`@yUvMcz9zLHL0%I5a3lyY>asQhQwfa!i*$@6#%~uIhqLPYKe>NC?GZU6 zcTcx^#DXBPdi+1@nIZO?-Z!5-VXNoIu=92CkyOMzJ_!zGo$La@PQikLBq2J5W{PFbz&I^Ljs98P3KeyM@4^p~CA-4*Nhh0fn)vcq zw~jc??8P2w&*8E~N$2zv6X_Ju>_um&vJs;vrk%)`h2HkeNNkCOME5#rHjgK)8w0cK zZssF!R&(DK{Tg6x>cU|LlORgcdz;{>-;mz1W8SIg{TTG_=wZxyp+|57DZn+>>}^QRZRk+zEp=2gt;W92ftyL=hjLeH zTs0Z@Xydatp=#6tS!+wio%6oesiQ!jdi0eZx`)gdM5tra#^=l)$#buj{axVtoP)2&3%1G-dxJu1gYd_jIsM*sfFLS5!h`>^CJ za0q*L7e2X_C?!cZ75@p{SWk3eFXOt^bN)Z#w})v9-{H5F-Re0`Pt2)bHwHlYzOXKquS48ZDwbmoqj>Xc`9Kv`oSZ2f__MmfPgi<;bNH{O zad9**8ubEmO854_#Sm*%+DtS4k{I-?mlKrIWzgN<>pAEyTL$m43mrz#sqUh8goU?n z=~{>|^*=TXdcrRB*NYYU_16lG>Fh?H`5WxycNu{^t4;W0B#=tY&h4JX8KeS|AjZIN z*-d}1Thn>wcRE|mv*-&o$a;c&qm2G(-Lg7eJDuONYrXA4o9sfn5p?1MLWHpYdS@XA z^JJ~11(fQ6WlAifLT}=1vGpP-MXV?icOdEV;A{8&Wlp;3+D?t>#Amn&G`9ZGyab5U&y(YzK}CW#}{(?3Y(MozE1M{ zIHzoT4Y}Up^Emjp4KfDbYyHUn7!GZ+)7NpLtsmMEiLc{4g`-YLlwNwKHB9}-Styhj z-^Uqy!KwmtB6pll{{-P*vuPIA{=(v9&io~YB^<#$A;FcXdkZXCv~o-avNXYwP}^HXlX zDU&VZkpWGnBUhg}y{hNCpAM#XJ^xod-y>BWub!WJLly1MkCX5pS8vzf33rG)`{4c> zC3+}L>C+S=Ow+tGYfKhzty z^vzwav^8b~YnABH)Uv`xS$~WK5KbUni~rY4uFqrkg8VMrO>&q0 z#Y*S?@*ehKI(m*B0Xg(B@iim$-M`ZCwb4t)A2n6wqh`Q2#x08j5OTdD zp_>Zb(u3PvGkkp_c$E++4Cid|cZ<>tQ^EmBiMG;*=5Rpgq=Z8{5^n8Lsyp1i+L8ia z?f61p?OnIAk`eM!a!2ro_6Hw?_fEi=e_js3F$}aA?)WGDvCK{No7G50DRBX!tS=({5L*Sm zct0MeZ;8P70Wtb;SJk)CslGisMd(3)@%>8L0tIsjp~E!hm2UF+$3+zSEHuL1@LS)9 z3hw*MMX{K0Ieqm7B-1T8uEdFg+!y2AID!qwbdZEF-7~VFb zn?8~0O3i`z?f80ENfG7n%NrsQvsZ124|&J+K@^DV5b)MC{W@f0CB-6MF;p2jqh~$1 zN*+Mt6`wQgg?CVtpK&_w1h#`M5*I7>u*K9>d~?gkQeul~Ux$9N;-Cl?S5tsrtau&; zK32Q{|I^KueQ;JR5pl7S1tN!DjR1AyQV<(^^pvP@yPg6r2pKWLdY(Ewh%ys>#h<@8 zCLe%QsKcd6xT*;zG<-zxp!vH4DdM{@KK{Uns`ztt_+uLGgu(R+{q)CFe1h*x6Wst0fSI@)UK~|e z1VsAyw}ldOTr!(7nIPFZizhNoR4r6rA9mKMmHqzZCZB3u4F|G zA5kCW(0>C~cyy}xB1AInDLXB^7G1#prw5<=%&0opHODWU97eYs)@159&0oMU$_U=% zGRGmKs23J)>HO|P4a7oy#_Tv-MKZd?7%@l1CnuycYT&_EY`q?>%J`Hc3t@QDrKBZyG0(%OMbs`VFjR!Nu!5*|}*1m^3VHSG9VXr}?T)%`Sy2@Xt>Nb%+M?2@UP+gH~ zgtptBp|Int_C4&+;UF^{%dxvChyRL#q|nLXU)fLaY@36pZi-#7Z+9K7Z+9Ke4HYkW zIX-=~LN%7q$2nBvRdLM{G&ZzXL}~!Gps#-ZIr8BBL-snts_}|&7uSpzva9i~;*(@v zU=bFJDR>3ekKl0zJ<9d)Hhr^J?8@Sgen7@Y>ZYL{H&CPxw>W3)$kxN~#MaOMNf5n^TP+-uNds`JzsZ;(U9SQn{5HAzX;@LFCLV zpgLmWkSs8~v?qqUCfF?!Vc}DO)CinAmP`WC`tZFnyaI#4>~d^GVH^55u5&YH-iqlv z;`A3maC zP>l3J7>eRr`}Eax{dUZ*osh|m@)MzS!Z{tic_x%zjYoT2Vl*x(Rh-x#7*r9;3LwBP zF%2dGxry(BF_S-)O$E>FMTf+w8Ja5%PQps%mhNLSqi4hvFkd-LU*@LM7VA(+{!Sk{ zXX9)EW`Z+RN@WXGrNS?QI<8bk>6Jc&;EG3&X7*o zJkDU^I}3ecxLrcr>MyU3T4Wn@*O@T$K=WD7iLFKq>+EY zFNlZm(j3RL;yrmWeZh?_%m%ILaoe-vJ8t1wF$4joOaaf_lv|p|CT2T4>f;tT>6Lnk zbIk`%#nF!+(^?;JtJ`s#eaVFc*QiR{UL+wR?uv;IUjSG2*alOAT@6Bg{7;89OB)|RL6J8;ts zM8)ce^)C!k=lW5u-$(*kUOzvZ2l5vqpF8pUB-KpY0(cGT(%;0-W&U0tymv zUfKiB*|(uq)uN^({1#P3BjqcxWetOuFt&MjCrgCxRi5kmL>(afPAJvZ2o z;OtM1C9#O8NFoZ)JDg{^el%EeeJPH8!PYO_$r3CC+#H`2A0;^Yo%@NE;Nk^hLG$pH zAf>i6URxr8n~elyf|bGL=cV&*d_hu>qjfXzZrd}&cg<;bz-t!w=))7`m-J$L6K2Va zr-&rm6J<=E%8-dq%<18Zf&_9!!KXWa107scIlXI@cXq4t%Kxm&A3$9dRnF~NC0+B{ z3FQs{S(T#`P^NUP@=Kt-v&tB~Ios>spyTUMWjD)@H4pYIThmB<4S5P;z&dapk2HN# zJjE);JLyAf{|Qsrm^|xF^i=3a&U+#88+@M~UevJK{TP9>y)p6{#9+Lv378wmafO{D zuQSJWi5y|%pgM;+b$;Qrk?p+GUD~K&&(orf;|QEK4qxrGK^Gb#$IEt(H#>7g6FGv& zkzD`c)(3E~?L`;xKMui7-NhNr9GIW(#EGH3sL;G=E})EwZ&p#|cs$^=gO5sQ*ij`}PUv;Q94E}9 z&{3})QyI=L2Lo~e;m&pDNS3uV}<&yGf(!?$h75N z^SR=|4H(7t{V(Q*HAmeMV)uJq|2k3{z=c2)_caa%I zUkw2&?rVoj`f%~Z1^e3ykB@*2hjRQEHZ=eo&Q;s19=i1zfOb69V|gzYtp@~+6#*K$ zLC3sfnZUx&?QaK&F9uLAoG%6}D+cO(TqkM~4&@NM!AxgpaWrreb~D3~BKZmU=!)t} zSD?CfIYhHXNRzHqfdg1R-cNih#T3bDlg!k zp8?9pg)aQ68innb>(9vb`(etG+dH{t=^xS0t<}zRHlvGy&BBgMvy!>6@!pAeC*nWxP^U1q?>_b2MFnU~$ zw#x9)>|JyC0*0sN2>ta-`=t+&$1k-+@%ef#K>VPiS z2hn=v1?qrb`p5y=?g1bkM3CAYBX~y|Q?8Mm{z#{l=5sdia{Y+jo!#m{wh33@)`gC) zy;?!{oVPXN?0Xp9D=|FTQ0djRIHE$51;~{xgmmdcj5=Yva<4$Ww68KkICoI47$J;ZN(y=qZNIFzcFJ||&h}g% zz=fgM4hY@==MQBBypRJD)WC(`&W||!0otTi>l|1#=@U)*)L+?3 z5Rq%LB7NWhVnd}EPhCyz19Jo|z#u%@AYxFO&(;1E8r`5InC+JtKDX4|UfWxI!3r+S z79Aa{OWaQ)?BZ_)#{k&d^rKk9zYT8kE4T&XMB@UfJZV48->(|!*I=oWVUB~n0&AV} zs$*E|l&ggost#cRn=m?Cw>$#Y?^vMe@~sds?Q%`R1u9?2CMSQXZZQ zZ2oPGO*5Z>_=Dj<+Ej!xRriZcp&)Gv$zgov;Xk$?5R<0uBJd}CzvlD){soQ>zGO^2zn|XZx3|vx{ z!+-rEI#I@8^nTMAa)rEp+*F)@&?*{nhg$$tYxbIjBh&khlK8?ga6Vs)d**P21`4C6 z2>8eK0B7DWGybrZ*r#R;`6V3M-K~9WeKEjJ;q%;AkzK*7;MR@~Rd3BQ+ZvG*m#G~D zBAlxq>1sUeFFEp%D>KAV34E>!ca`zL)Lbn17MA0(BXDzkZqD#5W*z3u=pK9+aOL25 ze0?$vTVVsz1G?9rL*(HS%jp!Y8O zfnUQ9?tAqzD64PaOQgJVYHmB$WD8-k!qrrNqYm>N@KgI5$pU>N;ZYLz9KF0ojOqpi zO2Yz@ve8UjgeN``>lQgy+BselIp|E4`3!QP12}7nGZS>@4sO{$1waCA`{gT?X#t$w#KqgV>}P6`ym~u&5vbUKFUm%XLT$kb@`j^o#V#BL^{6;- zP}rmy)B3v>jj=EHHy2~WRqP~|c!PIhsGrMkK`B-CHwlRcSBo46eLq#EbnfRJ1BG_h zw(uno_;XJRRJ0*b8g9V?#;hLzg=3AN|5%AouVQ3qr1{z7exq*oMBHT#MgYftIEQ5O zQqXR|i#rvj<~Cv>viv6001}7@@~EK$JTjDQAD@nV4`CT{caFdC2!GrqFF%8v+`pjE zKTkF?fOxEfvU!*o0(SStG_pn>uEq-_)#H~j+`)BFVOv34WPLTR+N>1*Q#M{fIxm~& z%RK~GyzGt)ts*+g7@_;vVO-pVBbV%_Y5b=PeB4Xxsl41bc$tg+G#!>NTn*b74n9Tl zk_hVX@uzF4s)uF@Lp-TUbR8JPahuBfNAc9XpGg zqp%j%q!Z@fu{7}G(%-|y#?0$rU7;<=hh`SeNRyX+it0Ppqe#gfUOJ7H&RCQQY+Cx2NEN z<1?6~h|A%rgnBL83paNIFUr%J1)96XDh7h(g_?o ziQ|6w(wQ9dL)zB0n}+y&l`(LH4g4MiO2e}>sYU@qIRaIx+ ze@=1&0fIYFuwb!i$VYeM9>ogf}(N}$ou`Rwa>}LpdH`${a^Tyv-i5} zwVt)sb6d|^>sgVGmkq5`hvgh z@$-NmZWs5Th0!Jd>FLZ2m_72sB>4T3E4yOonhd{xaw#!pT}|G|nI=>cw%jeHD7>Hl zw00fj3hkScNShOsX&Dz8A-%&-(hv#}Y)yBOdB8wAgOAI?mxQl}OM*sxF zGGpAX`o_d^5lGDW%1%6?^F@q%cXQM?a3-BLkfibaH;?b&HhJ#RjTg+4C)!QKat|^2 z3-SJM0C(yygu!;vyN=(Db!u~n^y;z0I(5IqVyzi|=0^BC>>%G2J;oAHYZPNzQrBkt zO-|iBt!Y$T71c6ZbwNtMU^6t5-`(7Ni^( zde^^^c4@b2i7Td@xFY$<4Vf0BYdf=oZ$zA*PNqt!lR@^iKZC$4*cUP^&v;hxH#eP% zg4^3_UvY|BBh98ap_prs{YiNZ(-0VOc_K4b-0H0O4~jAzXgY(-R>`IlnepOAXNCF~ z8eaMtHz?~oj-v*=6XPfXl|}N7Ne?!FM&>*-PE$z0p1t=M%{(J7$6YkdcX#6HGf^X+7iQJXA zS&ao_mc^P5SmzGKv9Wi^YtKvf7{2)8PsLwni!UA=M2yPDk@iIV@*3sEsncc#MHj}3 zPdK$W%R*v!M5*nGlGBN+bKC`+{`4;sKDqUv4r~^;cz*P+f3R1_>_FxdhALx4t+Bw% zI~{9EX7aM!ENd0E%TYlJAH8CZxCB;o;uq zIxrjh8LVlhVIuw+kh$)#OoXW`b*c-*o4PQl^IpSI#BZd>CT7f{2lKUZqacbF{{9a+c)vqV96_LyEvo_(?|}{LFxzW@;Ce2~(Gh zHDwiaFKg5X1I-QF+|D6}#EM^{KYP-e_Kp~^$s5q-4QK^p+Bcw7r0`jFP8`?SgGxUI zm3n?BRJv9E{WnEUb)(Tq(CF(uX>?-3VCc9NX&Su}XGEstSk@A=Fp%GV5|cjs)D8an zEEEGX50+$ZKIL!T`nrU}chb$q*T0GupqwQh)G`v$d~B43lMFV%G=b`5>6p zpW7B-zqO~9IQQH~?%IP(+I3W=3&-G6(5X{@20Jn+++JqXt-%i(kcTg2_oBP{AHX&< zv_I`Huq^?22XMB@v-O~XZ!wm_JS5}pu2xazwf;wX4e_?+N(3pnwa111i>da^ zm<9gUmk`OzW74yE$;)yAYgc%TJukKYZvxaovsN5Aec&MJtf z0rdcsBA+uQ5C7-%x7rGOgFc=uPjvC*gFQ-68htq116y#VKcoFVwIvvQw=L#|bTRbM z?Bp%IzU4D;pU>in8Drbev!BN8r=z=n8bW_*kMFxff0H%zA8IiD@{IY`^vkJi`lW*T zhN0IU`qA=3(rL;97Z;+9oN<@3&#CwMJUmv`B@$51rUyS9E1jjpsgqMOhDrHCdJK1; zoJ_vjWH;UD!t8LL%*n*xixDMTN%9i)sw>l>?fw4VC%# zDI=Tsp4G>(;JO?P+5V4n6Ms^e>+4dMe-s4nVfOD+wDZ$1@)2HXow}Q0{?47+pNZ14 z(y3RK;f|$~$;kpmt|@iM{T`jif0E=3cyll{&r4KLQB+>J{dNPXQ3lcDlIx&3_-LKx ztck0m*0-BcIgER+ttU8`wskL)b&rmkn0$A;nTtzJuhUsp89m&l*VxiUDs@K_d9MF8 z^sU=4td|DYyoW0)&TNXlvF{Df$c*Pj-G=yZ+%+|`@oHlYM?m&w;s^XEm$22*#a>?) z#Iqx%MMukmS=p>7vw_gg2i8+D-^7ZWYuhYca$*ph15?ALX_kD|vE&liN+RLPq zr}-D>KkqUq^93-+U5zJt(elLP8u@?XrCsi0yYy4;b8uTgLbYjyalD-LDH!BuhsKJ6 zWh5k%9bNpfr8GmCWp>(;ypfzz7)p{8@I1)k^iMLfoH{lu>3(XBdJkJ>dj4nOd+ct( z_Y;x&XMwH#PQxFHMQ!up{&I3-nW^5QnM#aCHo|u)>gNvfb{A>x$0iAzk$U{rJnmFj6F$i2v zW5~2nSmhJ}mR!;MMG* zgf5%J15L(Xdj;RydQ-tHp(TsYc2!vccD7iqtH5jp9-tTn$|Xh?Y3}H0dsFrU^dgRr z|1fG%&3UBEinQVR{d*ZsXsaATzV#>OYbPQkj@(ka z?__OrPI8Z;Iy1vfIdqLkQ~!K>3kR3KQKl>-<+_&!rxjZFCTM2k8k^)p&)UlGWi;GG zLoX{9Y!9^V(be%%RRPQwI_JHiCi>;(iYJ=n_R z`gc7*N~%jqQAVfk1bC(X0HP&j!8J=<|H?(lhiQ*S{#6pedi4dDq6$&c^dn-v<1&7; zN}OM{l(6o@UuQ7>zhEsHNL+IuKk=anmi+Y8V?gP)K2>8<1$ zWSm-bKj4L=nZj0~@-l$YzxInD3QK>o@QiDGOb7G~t2-9^JwtBI*2y>i2tZ4?*KBQV z=f|9%?veDZc-rJk&fOYfIXrL~t;DwbB@i&T9x|?7n-vc(&ET~xvKE&2lhkh6lk!fJ z`~}5MFFxScJ<&+DHM`SzGTU9vLRCicHRg$^wlh<#$ZrSd8kBN+Hq6Mrw?C@B%OO?> zJe4wOq3nPfNAmxM2Qh2InD(2LJ;Zl^PjV<9sH?^?_!_;xCrRGr?&BE?N~8Wsqz1g= ze!h2~P&NKpk+i_@pO2HWk~dWyLmq1SFKTdcU|p8zkDANOu*~O5&RohXt0=Ye_6zav zVf5QKLj87nuyCD8rn#?1HoE>d@=Fse=hU8c?)YN7VjFfx?moKGufC5n^rf%i7w(?@ zR8xC|RjpluWPSS&p@=Sg4X!+j`t;jc2?I9Pdx+Ui8jVhiiMNtpDAR`{(vgTizhO>5%@FCI0s3yzrFv0B? zY5%Sya=3nDa6_H)pSb=AW^~q`8tB};9jpXJm$d&D-4osE>gAG1!}FJ=)VJh>GawV= zsxFn1^)y0B3Zptd&QtMXB(sz6ndt>A1t*NU2>XxR=hwcAp@k2C@fzQDm-^f%A%Tqc z-*95iZMkw0@4_1~{zRZfy~hE%6U{_QkY8F(nkdUJy~&W>*1cX((iwi>MUW)*_(m<= z#4fjb!Q$U1G^oBrbGK!xv!yggk7~zo9$sTD1jGC7+Ry0RUWHY_VimS3(^J^~Ta&+g zKBS~IPMr$ZMm?i2h4pJ298{dI^0Wo?1j1De+^5t;&1~3x{Zdtsf~ER`G!Xs>E02G> zAK|x%7SrtyE;ahV)u#6^pqG+=cn<)A;VW&z6(->mO85s7I{uXE){#`=A8lXKon<}4 zEDqtDsUdIF`;yG!_nhGO(pEKIAq6KrP>p-QzaYNz@Nxg|H3R^D&m#gn)HEb9hQNTUKaiR+?8 zUJG#y$@o1W7^^=)#27ijFcPD`0m1~@7Z{TBsFC|79v=(7nT=t|GuJY<+ALwQ zucag^`O{L8qX$J4n$u+6_J?=h@A5oGPGt+q7A33qXr20 zqxcc#SsSha8u`?1H%|4(lE&*{YX8ogU+rW6P9O6huK3tK-CsN1e=hl)*ow~~FwJ@E zv{D=k78Wcr*J}H>mis@xDIR=}$q=`%elIV%s0AgK-Qx$7fAbsl2J#bFvCl8!b~$YI z)w&Q?d9567L6Fd_oBsnrWH;mMdXyC5T8$O2m~SR$bCwcz&u&)KwjIfljHSmWiOH&BJD6O~=17b;;*^N;$9u*J2H4OO3S3VCo{hl*G8vm5Rf=$7Uy{ z-h{=YMF+M}wprCmOkGsp7_8QyCd|<6CKy z8{C;TkN-8byUP#CJWk~$Ju7~=d&QsWnoqsoKHsf=?Bj3B<}lm!zn-7?M6&bWHIXJ< z`(9RXHRkc%z{B;N4CweDLtGUb*y^0~m^cl)S5C-0-cq~IDcT%qGHd}$<29V8+ZVfp zZQHUKvwXVZd`MsYKXy9%2a5I@n|LO1%v_d!iUo{Dc{Yf=63#ENzehM(z{HgMHrcFn z#EWd7jt*DcdB{c&ZP&!VKe(sskemH zxbEgNr=Izqfv5x{wsX%vq(X6HujbO08FaiLo><1#q`RgN>grFy#U2@C^EKTK*5}2G z_sVvRQ$~Ggn4z-9irApg8jtLaMTl;Hm!9*AXBEtM?$IzZnnGN7uv51lFyfcrM5VzE z1(DmnV9LQh^Hl(9_HakqUMfm*l3NZR{(xU2J3w+1^IdpjIvoOe!1 zL|3{E(E`?u%lwzrwO^xa)vr$7bd8)~``d5`C&p0P?n)3!>wD*dkDOtDKwua!p{qjZ z>fT2DPORGG)Zc3aG~=0=I!n3)%CI#Y`&sQbq2{ObIWQe7ad#3sD_~M2hN<-f=&J{Q zCr3Z5Wz$bmV!jC1AbK1nPD@;tdf8^vRdmY!`~l^&z9k0mt+DvIGaUWzLfDu!Ap}ML zo))b^<;@+n`?!N}6B`E7^zTKQ%;>3<(uQFL=7MaEdvBDj9<8l1T9&b^GTjzs*k7}Z z{WZqmD||MKGFR1@aWA<|<8BsZzJ{+TQ?ih}eWK~$WgtXGaP3*n02{ohU1ROHuZqQ0 z{~NkgJPZ4+*uhEcw{P=NZTph;QH)#{J-EToQugB6-9Ded=Uy-?%WOTEA&t6Bb2l`y z8Hlrgc?oUspHSmIv{~)5geSr9nrhRcN*WfnsP;|tZjV%q#=oX0)cR`E?BQkPO&g78 zC$A@?n$86x=z{{~o0=WzIuZ@M4g&dXVKPci%vaeXU=M z($_Loj1ZeJ@2kO_3{dw$DTBfA^|u;uj~YmdNVA0ZJez_|hqezj%^KWnnl=0vWKTo9 z(B}PT@}|LFXucBcBkT;uw;z5x{h>Zuh!~rlyt(T`qSB4tU~8OVKfJixhc}SR@P)Bm zUn))`uPQIGy?eg>vg7;RVNIUK^V0jljC0X$`+t}khd<5-49+i2jp~bJE8ny)pr@b@ ztN)cCv00RZgWdGqjlY+^TU}<4pGy+_ zj;#=hkD+D{HM(<&)t&1!SU@to$O5#_0Q7r=YVu0})Rk3=^LQ!FlcYFLl;Zq9_84{N zS9HlluxLDr6{8Qaqcw&Tqfo#4delEJ)V`8O(Ruvz!g1Xkcys$ge(W~t_8WQavELV6 zdWr3b>RD{V<2VJpS7w1&Vks-B*arU11h^f&kxk7boH}VV+N9_j{9`k6G8g*=x<#xd z%RonO{1PuZi9syx;ui=FyywlcE9sAsi_HLSF$23z{qb2mNp);C`fuWVcQsKA#*XA8 zJ4`S9PfjB>5QR5>;CZ_sM~jTYgN4_RO}*HD#B zYpv()R*RjwN7368Qx_8NUzMMXvGLsKJM9lipAUv_uQEXY8y)GcR(B;2aP>%gsZD*% zrv9Bt)vP<&qSW!EBHx4Ie{0kK%A`M`^nX#hPLSJOaP1R#4gCstpO1WzQC7>C^cYT* zTDah8XEH5Q^G&*DG~xZSUHC6Da97KdV)9GW7vAUIYyP5f#?{6kL!2+V&flyBL8r6q zaBriVv$lHlYLsgk*OjlAalKAe)5+BZCD``_pv9y(vu36^$1(Kj8Yzs%!ygs~YNo&r zg=BN7uH!M=+iJ$ef~#}L@N?5QbWKL`pSzNsI^7XsP``Z%#H9JLR$7KHNN1;1Q(tmn zx6kUo%V*B2YqOnIQ~NdT%fT7MfM(vK=C{9AW1CH>G9J}`l9FS!XNEk|-??k3YFRaP z5E|gr!R}Lp2wu&F#H+5wY2~V02k`UFfgHmfO9pwF$YHIQ;_<9NM6P`dkwTz4n}~A; z;8C=ZwHapeEajSNAG|TVnpZkt zH>(pvW3`8emJZlv$dD$u1J-Loe^i4|{V~n&uyQEWq_eFNAH((&1t&}@E=uamtGgMq z;A?0DV_}|-GGst%8BSdrSVAA*Yh(~$35xnlLB0AdtbdK+g+4z87N=Q-?eh~;(qr5&WNw!*Z0WvEt9Ke2=mMwaSm9CnNOC-ir$Gu zj#)r23IR2E0-$yz&jqNKo890C18QG8>qg$CkE(Ok>+E((f$&mgw=PQVoTA=w>MvtB z0=BveVeV@1BfZJo$6t&2eF7*8E zmIE|PR^vLVvy9zMcP}Le$hbr;X%Ks^Ju|?$>j280z|O~bFVqW!Jp{9`Vu{@0@nG`to+t?)|V*c#B)ku2Q_}4gh%Z!@J zo64rU%e51$_^Lc3TgKjE*z|)u+|@b_nEWz(nz0IA-lY$JNIwNL-mX1$(7F3=X|uJ5 zaWt_eSNOBYV$5M_XPm4t{*&9kPbO?E+(q+!8m)!8_tf}c_|}Ep5W&*QGbLttpX{EZ z;eAx`Y-D0TA&SRXr+x(VKoK{Q5jpvDlV48UlHY$#s{rI_e@7T!dnW4K^(~|6))~5= z&c-vN?F!!fct(1;bzd zo&n>N28`R(r5y*5UEilXriflfhB?kQ8}SkMnF((bCdHCp!alAAx|p;lBb@Cys~DU1jX6&@!zxL98>itJ)!&Svr?J83+8nHb+^xp!OQHlJ zBfBTr@|7()nqq2C^sgC(78kGIV(i~eX)`6ykTa$_Wr8BB_u3c>KW#jDvuWdRXsWwf zUQ&|%X=BG_^vI^`7!jyd`!0zZH2~OD9Ttx$!3CBseFjUa%1w-p7g|j z(l{UjS_I&xSQg;QqSvZV=%d0|(I(S7bp?$?B@>+P(?o_-jJGDwdz6psX>E&Br?aRn z%T|*||MV%UE5)`daAaIa18)NA^5pF? z<@49ow5igw_N!+)T2uYsJAXXPZ(S4E1|_$zx6pe~fBR&9y5^%sFY69812}Pk8Ng#a z+||1DAbI7hAgPX>u1uePS$=2<;GA=1}YBhYmpFXxGFTqA;EEg82@)-Bz>4u;;+Lr>QyYdc=(aiFN<*D3dO&v!JK@*qDIr6bFp z-{qk$eZG}B&O{KgT)d@lI$lxDBF4B4bVPo#O1!Oh?Zj^9Z~D$}>}%$eNvTgl`{6nA zqwuNY^OL!MUVg^F=6^|iP9S}7`O?Ep`MN@&d;a&~S7Xe7w#$7+t9pL`MC3<-QHwH%etaukbH zqd^rGsVq@j2_RH8qQK&>N$Pl&fW_Bd^A{15mc~tE12%xf0!xLiZYX@w5H+L@@15>H z&!i;z(v@O^ma3V1Xg5MIl`~W3=pgrKKS1*}?aWVp0ltH@xN$mewfYNA*Y7WdJ%{%~ z7p0x6-0gQstv}Pc@zQHF1R2$NG2Ei)RjSeKtH2q)8rzH1-EX@$vR2fQ>_+dxZ>w1` z_=Ob3F}*YqC1r}U1eEHJ56EvEDHRd~REZg^OLC%;sS6i6SE zUqqC=yjT9^hm0fyOG-?;)6IR%k^{Yv)F}{TQuTMtlCQc}6P=hpP~mcgHPInVaFK#i zA_>hZsJ@*2IGPzr$oWI6Wi=mAVZ_Bw9`0&wXcm=BOb&h7TDm4ON&*RvKzqKS33=hT z#->v!D^KIP68Tw+Tf-E86?=Xo^d5TDF>CkY<cd!tm(Io;>;*@#xQsN3&~bM>1De zOb1sN8ca=o8Htx722+R5gLZ7^8rhJ4vl|z;qU+Dazkk<@f446KiN(T$A4dM;Nc&tu zxSQ@`;5VK%r*XUCpWAdYhbvq%tNX3i@UEFox4)xC9&I1Oq`;onU4G~U-DxtA9(wq~ z18FuHYX;MQN;WFR%H%FocxdCxh7W|4hx&;Wm4P6bT8NSqTfXK2DiiOEX)yAW_3~ZY ztsL|^vx^DWqaDBQAs@eft(O?+CB7P^Zl~^BRGe^gSVI0W*P#r==^zmqx{7r1h=hyj z>bkt!`q%C~i(|~Q@|xL{yr`5Fi~3)Zi>=}5u$FFF!oBBCJ>Olrl(SePxR>Vk8aJ5q zMYs6W?F;=WOFaLV%Se|8L;vwQ-u&xx{qN^>T$1v2IAsZu87+4%(}RDWKMh}pKT}p- znLd6sFY&`sa;PBRA_+I&x=R$uv|s?oI14bs-GK)TI@97K*Xgb#*}qd89IQ<;F*30@ zifXruxs^X<5pPTj8?_^M%4~y7)lHmDFAHK>@b_5LxDA|KDK_8#j9kUK7Na*WEv?zo{vCLG50wABxxgyDFh1=I<@@_j=A#WqHn1#br43;{7^o zI#10U!A+@|Q-bl1SM)rm-+#UI7L)y_d%sd__PNylzpXTeKsFpeez309$fT z<#E^@kL%}qMV!G|bh^}^eUzXn%U^PW;M--zZ8dkrg4ubAiHR7N$Qc+wv{f} zp~9&<;uf`*F4$noSGfx|+E-Jn@=(85v;(Wk1-8zOR|dJ~163CHWVpwhw1!-Yv>oUk z-%RX9yn787kp22dX^@K*>4P#ltEOdAzt?a*zGF{NVyk<+Q6+kQlS_xm&+>|WZ z*)T2Bf0Ghf-m*0_GSxZ9H&ZWfEEwVybV^pNwmCmm+=gL@k{FE=jrhEkW;n2C3kP7R zOc^_eH{Kv8P}z^^5&X?Er36=(gn7hlza8t`8|r6_*pPTIEgD8rYxfaL2p@ehW<4a0;$t(3|m5ik#oFSda zso@|rmeIK1n7|!(3_}7amzeQ(V)ltx?ZIWiSF$Ma0=Eb!9?=0_(T1yn+!3WkFrX7z z8ZDITDUJM0TgE^S@rvkN8}CostLO)~O|Ry+>2B?sFW|y;4;Q|zy;#>C|7`|5yv%Pc zD{4;Z3%C=Bp#V*fY_|H9vuajkFFPoQ4PjN@bQ93$)g&R2{OMrs^L9f|TE7Pg+`Xy< zf3dF+xQ-LZ(GnUlgXO@?Oj7pY?;w0S-!o3*Yn*H-!1ReUd{j2Oln?i zYVHXTT`}_&lJ~j6m|LAyKYTUtvNI{Y!7YciUeESL8=BMLmJl(Mo#RJ*|QHhOA<`>6&u5=5^hF2lxsy1~s1qBo{L&4RwZwFdeE zP$1GEUAIq=zbc6L^HX+!ANMsvuLsdZDL^Ro+g(uQQw?>0vkRmW!Q*BErz#HtDmTCb zQx@^lx`3jY!2f9?y9$`w;7)ZJlQg6i*m=72`L9_I1_BNKyz06=wnyE4A?R~1B6h(Q z{LJi}8jQ(80OtkcGd(WzaW|g?b6l@sfERov3{4R(dBHVda4JFa#z%zVERg0q8T<@1 zC_!pDI5UfgL8*umBCfZ%6-izxs3WI>S$Ua}qrx?Hn-GaF=QN$tLs&c4#L!VQD;j3f zEuYq4xHq`pT9cX|YE;w^wNY)G`6^G1%1n*Qb&Se&ue*_VbVt#ZK|w#zDKD6m=|$c! zjU2#*8C=$B+FL@Mw6I(A)xxhtA}uyuJpglwkIgKN?6vS8G?3EO7vQu=ZLv?aS5}4S`}1z8WZx zo%!q?lH}cugv^dTt}^v+Y$Fo8G44FvY~^(GsrxO0ztKQZV!4fL|0NUF zE_k{rq{(HZbUc{?Ah}q<-z9I>t z(R1sYVfk-!jzIb>2>KDq&pCJbDS6?V1;}`CapJR@g{huB+1iSa)f}|sfKDlilcvue_SfLjZ+%9+HTmlW(F_*FVfam zN4jB8@>ExHYB>A8kE<)UxJ8?RYFHlb#Jq-C<4j-XG`Q>ve8s81qFYBA)2-IOy8Lhb zQRdBH%zgaAdpHwNiru;5a4hnMJmBEb^3CK^^lfcNq^2WeUUH<>OP=@WUo4NY3b-~_ zO`WG+W=i%7;GmonUSSSQAwA3jHC7B(siTie*2vbpC_P_hFLNxI@F*h`4<`KUr{rjP zb{72{1B11xWj3?jRpqBkgO#S!omKPC5V0h);f4ao^S8Uf-o_jpBn zco(jJIha&c%mF3pbXLgahr4{OGM5$|vd+yXeTL))lRVWVud~U|;^Yh*nDqH{askOI z8s{=pGwI9egh3<#4<2dU(0ly`QDvj-Hg{;4%*uWnN_|Gjj_~sR@#}IfM-T56zuauQ+ z7b;E7*?C{&);2A|>mvAbrSs&d^QJgYj_(%_vj1|pvg55e@)l+s5REP-&!@V!k!Z(2Wcjf}3V_1HB8@+knm7!qIy_B;H7yJuJT9H``8Pezd@7 zOI`eip)Ug=uFIm+kB*KC6%cKl_p_;wfOdj64aC~8tmLd3Q70pgliIh+QVzOixRa*2s6j;*m!!s7A zuM8X?(4#IU@EA-bPDzhP!X&xs8)GhdzBS*RCDW1Bd%;(0(W?)u7zl zOk-%~bD$$roe#m`%n*kMmPXdl(!U*I#Hd%aQ8)}nB1UJXKuv>ot5CQc5nvd0-|`TD zg+bH^0I};v219IG?8FOlhq9m-myFRH;K7@rj%UN-yN$x{f*yPWW+)G&4 zg!4!MoN55*OIX-U?NrgHu&~J+NiGfkIYoM~XXp~rd(;f1v*Le}4)tv^fWEB2qhUZ% z{&VqQ@Kw-`d;;bmFhahI*eDHVcas$IbQxO#ruyK%Mc=4!_$O?%JX>}|) zq~t|u(K8SlRAy;w)I`g7&A>GbB~mg2y2{OO$Q>d5o!KR(_(<$>Bn57GBqR_TGjv|5 zq;_FJ9IAWHN{*gBoI?E}lpZMwXoSaw-=%#t4Kgy~kSdHwP(4r|9dIQi)uXvaki2IF z$r>X_XxJ{k8a2`il40kCf@B8`%C&-IS||f!ogwsBhz2K%2G2!*v(XhpTDsS`aPa)* z<2yx#Qr}^1BBKa9)o6W4s+O+uuy#f8*^Ck|A8xEVmsRY9?1oC4WLGo2D5_Q1HNa}n789MlJa$qSxU$a)i4ahkw#yoS6U0&Lhwo!@JMzM!$o z&F;<4kiJS{S@zJbI5At`V>vPA8E|6Qr;tfF0(yKB#f#qT!GNWcE8F;jF7&Ycw~!Re zf3c6epZ{(~r3?A*73b!^7CX+#f9(jIlmFV}KKQRqNb}zh!j5zDUt7kx`L9h6`L9I? zt@o#~L+3gT|82?b!Vasr|Jm5FVn83*@#nB#u;cygx1UJRJl z-k5?doB@UWpZ@(|{{P>GZCDDnbMk+BuaWK5?SDc?JSYDjVbmZF;CiX~1O#f`ZQ1rf zLN4=(#rThz@W96m^_6KpLHu>^pGcS~u~@DH%Uz7h8Pb)=ult0e$As8S0B!;o`bUrCAv1^c`a@bj|8zJVo^KsxunWPFeVfiIVZ3K+{`iO;Z)5mi`2P_lh2+rw!CPqf z2-&WkKbone;kMo8kMAGubMjN$q37hMHn|UeY7^4@v~S~w&2&zFYLmrJyAOAFCGq7rn=_ILj{chZ*nQQ^k2J{cRz~ zO5>=tcRUKr=&RP=@h>2tri}l6d&ezY2WMEQnJc2E_BmJlg?MO{c<4FpF9qG<`S?eM z=Vcr&8+iJ*zl42tTzvC+@y*`$7v_f^Q`HB+04d4BgyU_RtfEgDJvucVl@>fp6VAC9%TI;tQRX*F80nV~YBH1rrtkbw462m$7!#6fmBmiWA_mY?P2SA!nD*`@jt-p zKDo0xz*%v(NjBWMr^V+9(?iaRd1O%GX`@dnVLAzbc`o(X7GG$JH`dCYrk{tx;`@`K zFYC{vVY>8d2=);J>{$h@%U);2n*`GKlDKq8WByqM38t(i*8F41!`MxjvSAl8uf2^x zOEVyp{|zJ1l!i&;%tY19h8spnnYOwtOnpQzW!hMSjC$NKY-DOZt(SiNC#yfjdg)Jn zSiIIisi`LC-lk$q3o#Ns2+c@k|MLt*%*)y9Wei1&IE?b zsHyq$H+tMK!a2motDun7j1>D14pW5|5M4-cI~avb%_|Gp##dJHrh6Rcmz)zUtJviQ zqYQB|chnp;7H8`q(XqfK4Do~$QpnQGVJ9k*38|TJFr~$3-a`Xn#?GpKAZf0pDrm-d zap*Q1on%tRlBd8VWf!t%UU+rmA1$Vkdf?0E1gS zAtM;S6x_6Pj(-HJms_GLI$*6Tmyp=V$Igm6Lledz#EV#? zU}-h5-hdU46dU*o0lO%LQP0|ZHZno=xY5!p!WGCCFR1&b46fNKTT4zuw3C79rg>%m z?bP6g#w*~rIE^1Z_)HcA7tg@z+IU6Nd;M8k!0NiQsI3$qIapxf^|G)=o{rrwmF-iY zqtTfTn?WuuYB84A@x@wO!%G{pOs`>-R@#OQEp0d-{+Zdp=tV!*5FN?)(aSVF&2NYf z>C&el6t0am^Vx}L+@d!&)C)spH)1NwrIIWiqh3!m{>o&jp!?YcFkuF`<*XVAXTK6{ zUf2T&#>|moY&0Wwmr3rEq1z17-+D20n-C`fa6tACuy;s*>(iG1P>4SL$k2_Uce5$lTC{!z zDq4(MLFP2B={#bJp+BcfLvt)g-+z{?gL)YBt)cP5IQm1UgkbMC>%aMav;GDc^83vC zaP%)g+G66j7vwdJx-8AnG4P9{V}BeN+8-~_bD~fHW8?*P{$*^D#$JM}4W~Zj=RN1c zDRMFtgIOMOdI!2lkyG@W;^u~YNZAE#31J~BFPIXoZO&r7oYiuz%8AM}4H2bT5jTn@ zIMLZ}Pl}aeS#5(hqC;c%mvSd6Z<#FiY9b71>vV871N={SzwKe$|2G+c?1GBKOLJPh zOaq{gBwmIXn06JJ88G67r8Fa6=+S8aW%?_SCZ{7kDf!rIy?BKCWDdB*EZDOXV5Y)a zRZG)1xUBi_b@HG309paN7?}QQ=3541SfFLJIjLndGyByv2-aVXiW+iy!}ZV2?#&Wa zJ!snpuU`gi&Wia4r~BgdHa$jqZ(eUxKCcw`>%h*q;`LS+Qa_Te91Q~qjvEPW^oW_^eYks^^S|XeLK?pJN<>*NSzbfRI zE5x{2i1DLytgm+8AJ9YRHs%mHz3o%swq351<>83-R=913uaTh_f3^veNC2u2Hi*dI z-Z}WQEk%CY`sU9zeH-cUXNv_tq_i}CEHp)1{WEPN(~9dD{c1KTpT!i`-DhUvbRn_~C{I%Z0z1>cw$&jG3XUFbM9i`ri1*lDX}SHcerYY zMkb9~9i^gi8y?p&KKHRZC|#nnV#8#lPX?dlICYnRfVC%<1r5?MO~%`I)t3>!Z0Hj>OQOtN8@ffV9Q^Fp3QY}r_L|UY8ydaKgdVq{sdx+~=Swy;L0$*^?A ziybD^U_;lnnb1BPO6=_Z-K93?Dy1c|FS-NKn~?LV>fCV~IyY%Z9#qrW?HQgYp<^Ee z?^fewK^@EKOFGsePl#W(e``-HR_|6{TzleZ5L;xj-M+u}1RJ6@(*5)-`NB*!yUYlW z+cItgg~#9IROw?<^*bEt$CLHy`Es0TirzB0QyilqHxGBCAP~+?jhOx6ws9LeUKXJ3 z#p5zE(ud$U!q(#-_!e`D#uqq6s9&B_bn z=Q#^s(n}#PYxOdgmlyOhk(X!YIaTlR{XEa9dYbnM+l#W;;eF;5@0>PrPHyC-oxcnJ z%_LN9n&%vNL%Cacd3Bz1lEXwN57EXx9SBd;Gmb0tKIZmdFF^$qfhx-XiiC?`>2sSWZ&ZnSDgi zwle~suNJ?WMFhFd93cb6ouOWeaTf0*Veu>c%%PmcdzI}Kz~0GUE0F?e8-J>d?wCtc zZszlH6R^KaH-C3S&DHZLm%p#(^E0i4 zpDE=|AvjiOaIDbaSfSP~YuCos%yTNqT={)6SCZLtDyNjU-v%8yvbWE3wvoC`MQu}2 z+oqIv{AaiQqu}qvUiixvm5MFL+m1O^lZHeZWA|&QS}-0G0XkQWWx7chtmlDn4{^ z`)349mGEW%Ab#G?A$GzV8!HT;35$;rY0zo$R=pk7&nwC;+*$mlf}8m1VDvgD=}u6{g`t{A%8=94HCnHYmHv}lV*iCCg%Sc`%`a(A$`dH)X*Q!@5C|tVnZ+^wjS|| z`%QjtDk$d{7ufvTO=`T@eU>!jUDq7y26rn@>gOo-t)apw>&Yxu@m9E>mc;T-3|)G@ z>qfTfx#9Ru9&ag(Z(t?W- z72NMy0Vz}s?nemxf@fBZjzz@k4pPi{#~`1PlroYC$foU(%hChy2Y3gysydVb4%)HT zRNzz**>><4q$mW~Nmc=@$`~z}_Vd%mSnpmZQ23y2 zuf7tutlGyLr!aWisaz)OF3@$iVcKg&=lhj;pHiC%c8GDey{~$-q8Sm6Na)a|3l&Q?I(_j0MZY6bI&g~I3vW!+AOjuU{9+@w0Q zC#V=YHEA*r&@Ug7LQ`##2S9|yFRC!uPS_aRSBz?sb{yhKgma`FQXNywxZhDQM887_ z=W+A9l-jS-!0aLGcTW4&{J!4%#lh&!4{$rW{- zcFxb`o88TV4It>^-3Gufs#JQk?Ib{aL4l1b_60H+x1|)MD(sG={3f9@ivi+3VesZBoS#U3<*S;AP^&# zld5U*o{LoSkvDmlRwG(^eE>fySuh$=xp+TaxA+BpC}tzMnnYhZ^eTB?;ZL2uZS*|n z)|W(l+w%1@hEHyN*@VZ4Znu4r@NN_S0y+qF+`5ATw+;LNfJ$Au+C`}49!g^uJ4`a$SgPTxo{f&FPc zQ=iV25?dLiQ>2mHOzye#d8MdI>SyIAh-gv-Im(l~L>`M8Y~w?|6VxP2fPu^gAQAH% zYFyAv93xc)&due^oB2Rm?JXd|Lh={|oRL~cHB}cre4)l0y%eJ6kA}591D>kTHc(BJ zhB5?7>&Hk~(T<_0$+hNNh{ic`jMO7*c%jh6+kyF|=hZ$+I0A^}onev5H;9FQOKzCI zIZV6tjw(Qfkp2-OszVk~1wHICdo8Ah)X zbg(pebujExVb&-fM@C&n1_TIXX+~ZYX-HmkFDh~7z$O+L)CT8n7Vn-bK~Oo+6e0@E zg!vm%qOM9KD0e8sdDJLM#7o97wl<6}PJhtvnqd5BQVROTBFJ12XKr&@M0g`Sd)h); zC4iXn&7o8?a|VwzTb@gvg>8Uwi{$1)Fzgm+2r>tA1sLBUg~YxPq7dW}z42X#!G0sc zp+FK;1$}yrXhVR6*&PmEVyfST0?*GPl6w z<}IGB(WZ2xW>)PDp)qr3F|q{*s8h)_=4R@hD@Al6op1{kV`iY2q**Vd=gm~~HOToe zv28FpX%w(xhV(7P80~$Z=_I~t<*T;0^n=(#b4cax(mh_)M;e)qH+iev!0nSjr-9iG zU|mW8z!(jL&P|siNtsf}QAe&E0owu&8iQhPwUL)zQK_xghqEcTTbb&~6$N>irr?l# zCA|l2J)Hxv#VgySsdv!ks=-@7ZmT#-w7xJ}h;SSYgqr!57c}}tG7CB=g@HLp2%e4d zfn?Vx8BH0UD89&_CoSJ<`bP{(N+(Axp;-F=(Bwe1QceqvN+~7q>B-+wyj9Zq?XKOo zsP0ask)L05jZn)sa|Ed#^OGtKg4Hwtlo80;Q*DVIh>QbL@DCUh3;1$KqKv+;x_GSZ zf-`$n1vH3J3BwjGKXZsbMUZ{*KCpQ4ets%mpk_spPe3Z({2b`7Fj+jOLPb=l7V&>g zr|eV-Ofa*gL#={deQvr3SO`+nk+A30@ushU2)dlF3E+J36b)#(=?l%X7Q961NSZl( zItNaJk%|vQ{!2$9ICMd*l{1G!bO{Abn1H0|mcT5bIZQy-q!OH^Suy4lwj`vDgmcx# zusDD+q_iGb=D#cOAi47O%CZHB7sys7sORuv3}{klH0M}4lG7Vq;Dut)S$bY9vOX;Z zkA&LH(xGW_2Vh4+#}!Na$099e9)IgOh2Te;g2~^DIdq8yrtkA9%MZ1oW;sP{=8^qY zW)j_7BKxh(B(sc}dnE?P3}t2) zp%W|Hr&qi~|5n~xpfif0e8f;OE?#jU@?voNrMM(u3ty~aH>#`HMfqVYB6{wR`=bi3 z2}X@}kuZd}6m6Rx3}ZPRBMW&Bmqm7$MPAm|`BYY17I`Tac{vu@QxbWKEV@aGI(t}mDz}NC{R*3Eliv_$H2z44lZGYpr;zXSMf&ahN$Pl z0gSlnP>QxY3QVJCD^-HMR7|XL3b*#<^J}R>4GX>na14hfe;X`F>|gr6Y*pBUFijEWT^u-NnQ9ZMp_iuYQI(^~YXtR- zD78>y<=1)Hy^cXSOM7T;O1@S|)RxQGRQc6Z-fN?OG&2b@8ZppH!v*yVWSt{T0O`s2 zxa41;VL)y1ten*>zH*+5q&Il|Zj|4-uMw{NzQz=Xj~#(j(@tZ0li;#e0@=E-S(A$B?=r_d%||E-$b7J_r#VjI z8o^J!Mw>w5RJRzRisUqQHfbA(Vgw`71ABuhiRqJ!A2M=Slbk9xCJBs&PW9`2V@z@z zZ40armKtQ_j3!4$&KQHu9!WXyh=~<4R+1_80|<>O7lb>M-R>ZJ&3oDeK+XyK6ip9_ zt7}fhuQ48^EC_^q+2ZI^3bcj=jZjjfe`vykDu~gP1X=vrfUqEHUrT0V-s@(IGoY%U zk7y_mi-3yoOc~@PxY0`}4LTx=Q!Y!SncmHB;f?7S{7$?^WWAtKIW-Vg8f`*aLQ@Mc z|1bTFBuq5TJdz)W5mDUl zaYbGfY{xf88BPxITSx>eG3Gaqa0`Fy`CG@|T4LAn*J4t0qT0e#=+tjx3zJhQX~Rkm z(uS2Bq)nlbHibso6sDw2VM^K*rlbwVMr|-Azm+x^8zsGZ?7W>9+Dm5iX)iG%tpxvH zW@GDA2^pty047LG^>`Y%CK$%yPXg*?I50oMGUF9nrv>AOOv6G6`+ZoLY%=L6`b2?`~7^1k|nrXqLPm)>s8roDSF_`hd>*rAU0+_8V|2H?2 zS(%s}-GXYiQ1KwrEx;kW0TVN8Reg)644FbzW9wtdr$a3fLW^y~hm3M(SU4;pG@k;b z11#sqBkRi|RJ5B4D`!T_B5j~_Wv)nw)dD*^i$?@H48%^%PVu6783k9KM?cCw1ej)K zW@crA3D!{#oHC(S{)ldv1MgvW>r_@}5>nfZp-JCqYNxVtB^K>B4DMwVAl_OzHZ=#C zD~VD$UPDhdnk?o@9(4%HpMDmgx5CUwQ#5d-=Fwua&O(5>MYD@rBuD64IJfFE47tlL z49lg{$bhheJ=(d5nd8bxto}3{`4v(``tZ&_!$7>!XkgN-{~QDHqXS`LK%nMmqIzxv zaXcuK235{AOk&c^`_5q?)@BpBloGqRqJfrON? zuyxHX4o}Cm?&?sRSt@&4w@D7y8l)|7Ic1T?^xWf(X+iDAHYyytLI!?4Tf3cnBU4us+JlDu*)@Gq~(UH%`7YCFhwZy*F<(s zFB1Q0I(DT~6&)GJqX1#@7+II3Guj%DO>wG5k+hR_R;R6<+|SyN!d8QH2q z?oG-)p0!f3ZEGRYj6oQ`TPXRORyjWgsW321Oo`d0n9KA=Va5R5v4gZDincbLBLo>U zTQ!yJhWBYDUIvuV)MDOEnb2+87_u*{M`Uk|DjTQKF zit3<jzXV`C9>A_60Mdj0*XC&G*PlYBal8k4t1)h;qWR*&(XV#lI5|QnT zU++)9oB?^Q?c}xoycrVLy5S}WqozLnER8K9}*}3 zXawI~xdOtakozu=HC)|$dt8EFRL`=imQ=O&8)+-^rQ%k-GQCJ>CkC)II^;^{{OC|r zFGbSNNvL`0s3E+zHBNEPA2oEkj`^XWq}YHy-D-)wLx;!ok>vwr!T2nFJ$?uuN+D~* z#f~i79a_%)GFEeAuT3+BrD>+%oPRlk(6)=UU416IdB+a=dTH)dqH?ED57LqfJ- zS%Q?g-fSVw5?~c+ie}VJd~dcOYTd*Ld{ox3BU3ceiz{s4&dNxcb}sc4(3Uw!kv^xP zwHIT!S;b>xwTwa2y)Nbu+E~q;Tnx)F2ilop5Sjq>$sY{ofacVr&_H&U*kFw(LgAFurEpjW=HUTzJEXG~Yd!9T=WdYj`c4jakQe`_kopKOlLn8Pb7;~ATy z-kg_FEq}B*_L~DO%CXVr$l9DLV}q%7_|MGI73H|!!ZCA8D#ssej%6>U;J8Z>ejbNG zR@2_jZuckptv&rSCo+45r$iNzUXM&nIo&H9^%9w!M%p;KY5Bgh{M&pmvJtN!qno{P zjTf7UWMos?zkK4Wr~OUiT1RhACH1aL1u=30?3_izfOgBAxCfrk(Z@L%qb5 zC}(kSsy%KaaC)ORSl|s*rK2}(KDaq4pZbmOZ%NPn@n63-asBB;CKngs1$~6;?{NKH z&Z^^FRWrhE>d510;nq^_W^z^$`x2+NijFm%y2u^3$t~LCH#Z#|!SQ6*H+L?1Kth1{ zjZFvfn84xUojsHMCW_6YtPS|2!M6ifNL^GqZU+H<7~#(57mMEN^~nxS{a@sb!%y(j z6sJ6!y`n8WG67?2Y0>6VezR}z1vNp9}D`rllaMw9(knp+ySnr>=S z>x&xQ9+pn+NUIrRyLCJU|v&FEy68)WRt(sHm_)tIootw_HnM<8WHEb*{XM( zRofzO(S1d4Ek9+-$v(b?PEwQ2|6N{WL(z`qC&RSO^s;VG=RWYJeL3EM#sQlKwDyG8 z3=aq~dgHiOe}@@fK4Nff_q+a9x9I6ohOMdnBHe|x`J@}!?1nYa3WlbAgx~D%P$SxH zBQ~VI+R0T#e8qhqr#O=6hA{Kh783AD@Pf1I`BYweH(aER%Sjl9-u*<+fFhvBPM=0y z6xq1>RHV5_AAqWE(<>kq7j*B<^9Hn<=3)uxiI2|1L*8=oF3diwi>u#qK8LlgF)=H` z(nDjk?0DOhta~Fm=*LwNlStk8mUEr{w!Y=eZmM~Kx9qKFkd4l;#(B>5jk@0e^ItIR zuj9p=Z=GcPHL#A9a8I+o1kt;GQ`5m*A!Y48$E|(ks5fAv+c4v--(0)*Xw$(_12&Zv z6H(IngVtjhnsmOWYd-N*4v3QAmeM$@)$_M<;qwgzi)uUj-|=H}xtG6Y>#P3Bt$V%V zXT1Pd55fG-rC$%GaP{faf{n)p6JH^scq>|YKbvTQ7tPepW7R|@E;Ea z@jD}KBDcZyb5o@qEQ{=7%_LRe)7=V;`K{b+&E0g%CckhjGXu8+_cd}6VD-o2^26KA z4J(=LZEG`WP94>0BQX6PT^TQKy!8Ux-;L44jML6We~30GaHskY4jo%_EX_}KI~|)r zstfWh&iYR;y@fYUB;GOMnDe;};~F==N0XPoCz8427*R~MvR^ySU6ouJz}g;X!DdJA zKjvK5gb{h{H`jm_SO^Q(C#QTbGXsQ}VDu@c@Hvy22+ZHZFoRwn=0{R4d5hA5!MF2p zS0ARHWWSp;IS=!>r=4#!cB~YFrulDrHd(84h*YnQEMv#*8rL}v)#RBnpNY{o-tG8W zx<7*9#q?XOg6;iz(K|s*@bWF^hNJcGR)0EjeEC_^t}@y*)MR^C*&gZ2rn?DZ%iqHf zQAYI_8MaYwqWZ#&$aCCC`KQRUw$GOSGWlPeTw$ z%!g(o`xPUElf?HbxS;~K-k{Zg2}uhGqU*Nm6lRShW{fGv5HMprY5je>F2uITZ$LWxgB@G1|I9*J65qi72HdP7*{H{8VLEA zuz%us8$ie)6RT)Rn; zyn*a!0zd#W7xdD`P2}Pub+Ger3w;_y?~D=O+7(Yocbxidkyc)H8pb~wIYEiz)ggtL zxAlQGlm~8vH(|Q)%}d-=FoW*W$E8kTvw$z*UBEBY(?80MRmHY)zB@#ebBzraA15Md z@;KM1WnpV~|I+Es7rC(ZVoJ+!m+w`nQxn6!Pr@n#{zO`#2m)}q@-l@NY zfEr&OqYbffI*C~LW-Nd+BYL(!9-(zHIPqT`hZ7EKWEcBI1i9r`Y~1kw*+-NAfvW%| z!rb%Hu{DpwYB3{U|E}kJe*JB^^w}(?dqSjz+Wu04vt_ojoafZfgUbTJ!dT+bf@RdF zf$>kET@5DCS-*h`#-X@i^5uszxgmT~i*wH_BzSc93@?if};oAK*=>^AfoyD5J3Gi7Y{xqM+kNzHvR|4fXQ6sAW- zH~r9Ium$IyHNeaJBJf;n#bO*dsetJNsLxOg+kJ?NCw^n-)1wbWYF=<7p5LA@ajuUG zy3O(68&M)e9B$;K^YFUJ(c-f|xh8f$hm`8#kyciA?nM43xc#&_ieA}1qPA{@Olc7X zK(Y-A!(>3RXHb_F8W18GLl%h@@2qJqElyT*Ei$GH-1Bk!=>4(Ux`Jg?83o+?c}6T# z5T89tP+shDFlF<^Xsh^2bp;WkYLI3|dpiz9l;d|qxQS^0UPRQsit{Um*j^yR)P(n? z)4g-tOAd7<*ft*qWO=90Wkta< z`+^9wFUU0e@|%K3>ESi z!y^QV`A^`sluz$1h>=fT8fWtistY?q6~JH5)sLN9A2Q;WV%PH3xJJTyd2AU!9#o=$ zx!#=mLHW{p>`B)5=)W&BV&W$QL4seILb%k5vW0zIMlJ>9;)!T(9=Dh{g)dOU+oZ%Q z)@**lz6F!&iO4|w(Tcr#<)2X`2)EiG0^5o)lSUcZ0PY`!Xa$B&d5|u2)W7x8jn-Qd z(o+&lYKUyovHMA#VT$LaT*(KNEXg}j>GWHiWy;%z!KFrH_&Be8omU$`i>VWGFg{ z*7cQ^$WgvDyodNCp9=6t^h9AaZQ|J)hUfF0(!~e;qy8I=0KA5Xv1;l4N-DHK?BxqW z;$Q02Ha!W8wZsCj7glL>L8oqOKV`ArUt{2q>PUE(pZ3=@*wMjO)6|h8=12dPD~qa6 zL@)PS$f4m?jw8yk2y|FRga>acq+0c)`=>_9k%tT{$n|#_bUB=5LYO!C@1+ApP86&A zaw*lhW_@HG1F&bUP_{=$MuXawAN{is!XDK|E*(a?ok{Dx3JXi^={lP`N@E|LB@ zNv%;sr4Wtr*ct0_2~r^!a(w(JKVcdDvoZf(rf3A9#s~SKM6f!iJnD zw>b}Q#ekRBbTAtW9QLNhDQGY1wTRsAXy(nISG=kE60f)|F*Em$RkbHFm#(>dNX=81 z&y3bQe)-Itn*ZvVwdO?^zk*!D63b#n2>4bB5|kx6Z4i@ED{c|^?W|kJT$#}FN z2Cbzv`S~}vMg6je4AHQaVRn<}C!M-%pr2?*!l`>B+bDZA(PPdHEzakU-p1CFql}Zf z+{=2%5WQP_ro_4DU!?KS)!>)VM7TP5Fxm~Zo`qNJV4U_7FCu+dPe{ST0aGVK70R5# zBKyk4gasbSla#D-Ca>$r%xFNpG8%0-V5vc5)Tnl%TfE*0ggpjXoF{KD@XT0Ua(lrT z=gAuiCV6y+DvE9y0sgmv`^A_g;Igwbxqj-r}v%D?Sq$x-seG&HZWh;p{n24hvNNYM2wMe0-S03DjAY^Es+9qjV)FM4CyC2d6=7 zh9QlIYs(lGGZLEN`M?YYHf3`NR^|*JVxF4D>_UiTG)vg5Hw=M9hHE&*4Msx}Q#_A% z!!;X7VId4J8FCkEvL#&e0tpnJ5w3Z{W<_+vDF~1=Vn?>N55sFW+4x1o!=GvS#u;FQ zCf8Jqa)GGkm?bOz6ksY5i-#A6?;8e^5RDLx5Iv13`r+p-I*I?O7RTkR-p5Q0T6=~{ zd7DGgQPD;8WXt(m11pD>X0>%&jV8Q)OD=pp6!!Tj&5Ou-BzRpTb?jC3#SPBTW0CNs z2OX4u?m-FE!^5fNDvCTq?a}ZHZ$`o|9O0tKT*x38Ei%YG@&6KGpFn+LDhJmDR_Ul& z?&IMjCxkF`hvV-KK|2nCRl_4($UU^-n_nHBiucM&o~1brzp&gz=U#_c5*5<8Yr-#Z z&hCQcLZ4`HJ-^`v+{?H^dj8`2s<$MD!+)U~#jEM!! zWGfIE_Dj>h%6Sops%T{tasR%z)Gy0VkwC>N!uS12X^&YU0(#Mpl@f@9OzKza&OmBH zAiSVK3#or3&=eio8cyBK8)zL$Q~f!$c}?uXdo4Gt-;y0E-aRH2xu<2P;|yK;%~PYv zA>|Z zR_|?bMnv2@Tyr+B_)MBSF%PjqNJF^xBDR9yop4F}rdx=rl@44Kq)=E`Jx|F|l;{Ta=*k zU+1A&XZl0JCoXS}gNk}u+C0R2TGHItd#Y~^@DxqX4rz{#hHEFX0G**R;JJ*a=4t%s z-DSyC{v3VbmxCa=`I=U2~-`*%bqNo*5G#V1yG}KKbD_-Ko%_tE!@)-FN9f(SN zBi3kRbp%Ysiv%2r_dZ?c^Nz8sY<=A^$w~PlY9F;8i9!4E*>ESy@@O@~*+*jj){V)Tnu6!m9?^5F5>GRWujL?vd(H`rfg3}$Cv*Yed`nYjM zI5jF;LxTjzR(XMeBV7}58M=Y4`8Wk8~DEC;tK2Odz{*3m8T`Y2{l|6 za*uI~a{ZqC`gd}jWS=S+6_P0i#Eszvm?5!0?#PJ**24E*hbLh!)#FB3PJMF@w`QDG zLSf62$bPBYMkNQ7qVCamIuNcoq*PHSD9f7k*ReB)--snI%hwPy!l_7CGr$^N2A%;%TYisl7;*KB)D@rnHVPtilYCV4 zGc(92p34vZMYuPiynZWs{R-Cq!8a7%VC-cye}j{}oy zS)M<(Wx7 z=IVQzh6zw@ag}wFV~$>|LqaszZR?04In|vnp}}igU*EZ_EO1p@gyR7ae2FPy<_4RI8C&_Q4Z?%6|^hHLjTgOWkb!W&wK zkbDiCI&(Qb@R0HKj z3`D>@bz994xn1UbDRt#B0f)gEdF#8mktBrVsG^R$5)TO5Tc>KX>aaC28XA;{rUEY# zlVK*T+bVY~TAmzHb~1R;9G4XS?;%)ZS$@ z$?LX6l9%KG99Z=fYT+xy+wwUt z_{AaeaPaBJ7_>hdo37A7xyhWi3plZO;7Z3VHkT_rkcGiXy%AH35sh2u(fH8%TYvAh zFR|Cy^Xr2~neQaVwdx_4hhybKS2!GKf7`~L3BNt>{c!cIkO|TI_V+{h10XR&P14 z+Y;l)Fs|*kCCzuLiphMG5USERj*Yu3%3ZuVJ$kP1ZKKJ{4ZcTQZg(215lM_aN<>Z} z3`t^a>zJYIbXsw~oqt=N& z$8*3oGvm!wqqDOfu=mSjGm7CEFw4-bXV^1lVc2n7*KLcq_3PfQ-V;De8*`o|9d+-( z_oMEsJNbq}_~JHv0_8yDRqW`2@PY&E1f}A0M47AM~v(Bi&FH+Y5 zVXU=lD{n{WGbfV90x!|KIafyqt`+^)vGxx+*4?2(7Y^q}r*5j6r!C_G9HyGjj3jhH zW{ho)AIAtlLUu+%wnR5ktmx3ybAQF@_p!jC>SJw{cLU>6F3SlF+_dvig6&hiko!~#ZuF3i&Gm73;F2?iLNDyUZ~@G~2@Un?uN- zt0LW+qf=M*#LA}qS$M%pj3AE7c9_oy8~4^Vhn%|Ip-8v-bT0lkPB#i{cB;3kKqSG1 zblo<0C=ltkCJ|#@!yt6zuIbtlx)!dzlBh4WW%vhX-VY(xD%;QxG!Mza13wjnM2`3Z z!N9tBa_}`Ke$i+Xod03nVBD zFYa?iS#tb$vg)^mqQQdat6vU}NhtJkC2cGci=LKoP+_+G1 zdKBV9H_r2hK$kBlt!?PCxes>$+~1F6*gKLQ{Eu4r_Z1oVHxd~5>v;hFdrb2AKOyJ@ zf9UUm|ELdZYiIbK28TT>9itQXcj!dN`{Jamy}>vOJgLD+4t|qUQkjU}UJnMhnfOIb zCOE$*$q%4a8P51~mLUk#4u3RRuox8iAtOKWD+W6la)VZmhcS#f4o(Kcge=I%yJ<74 zZfCHhZg&oAt4B&k)u<+kX z&>4O>-`@d$8o@flpGL6dbMNcWi4ObYPV1xo6J~upL15O$gFG<)H=5-0pCSN$GxQ=- z48L6;G4Ltgfidhwlr3|GF&6- z&2`3iQNM+o>Q{wJgUFWY7r3RPdwmN?T$5$0cm!70ovZ4AvraH4 z#s(6(vFhioX)#>$A0&?C_A@~vGn58__EvHVEFk}u02MBhet2P!hSw4ov;Zw=Wy1LY zfEQ6R4e&kYy^jm9v}P7yt@zJM>Pq(bELEvD%0#FFs2)l|Nz;#9N6+AuHWBQ=Jo`VH z1IR3B&kPmCQe_m1>lXMPyUtYwYzPL{DXI5P3>fR&S7cat+zf|RYmQ3Ydv0!4E|fB! zO}p0Wz`#Vh2Eq%+X9wyx=XYD9bRmZmV04tY1wY~?qd40<#id+Uif}ARn(0emgqrp#Caq$ z7rUeGcBg(Z-YR83a3kec4sblcnUe*)`(ZoS6Nf!}ZDl(oTKruoklY{;f zpneN%odNonOn^|XaRGf|I=9Lu%L`hj<_#NpE7_c>A7Y%Fs+m&Ksd&D z?+!1#s|*VRHp|6*rbk_F`Db}JH;#|p&V`kx~y>k>cF?+&6BoN~}Pa>33o zOXel@(7S#+Vp!gP$we!duL$zNv9K9ifI}KvS=xQjDNdr|TMVAH)mb)F3F} zU0x$?Z9I6d!6J}8G&W6?bq$z0f?rV1eH5*JDXbFet4Fr!2y>ou4Vk6M5L(c_qj;nv zBZHxbIuLlMyOX#o;3T-4DDC-d1gHqQ^?l8w*-dxQpJd7-@I!fqHqvp1cc}QFp?UDd z`J{;-%A{jFg9*hCmq04x6oxS5uQ}X}$*|PeV~2GVQ|4Rw9hl)<2<=bK677E4)|~8n z9Z`=FGH_j#WB9URimWYhnh5(DhgT<1mH}Ov3{?^P0x=k$D|Ek@_~G8VmdkQY2B*{; zMi1M&>DsDO8S_A5Q~+k@p@2=m7tVU8K!GKcwe!Lr2dGpqX*?MJg+v1_mSYQC4?vYz zPYEB;1r$pI`XI4PK*tgPTLIM;cZy+xp6^L=@MTno;};{)Tg}414DW-Gf%@l@6mwy9 z%#R=xZ!3`!7jL}5Eu4!=VbqcwWu_7ud1V%o`Cm5Ea8Vef&5WmJbJlTbK)QEsvPDTZ zux=;j`jRY|<)7qhEWRiHCxnS09*bETA6w!u%|O6#L*8RBm7M%lPy(C|TXfnh6e26@v-4qwb;6EBSn4qqU6)dctreI+z8JqiF4VQm!SXG&%g|K=%6%kcqLLPo{;e=r*G7_hL0= z0QS@KEnr&#tmxA|=w*rPx^|)T3Q7xrF9KT^U^BfC%$z=CATt>mYvU6PIJevyE*Xbi zfkYhUscN-8BJQ8p>|u%+|HllnF~V!j3?TA^7Z+Kj16(!|EO?G~Czb`)>=p+u5yz#V z;kj%8hR@X=Eb49U*?6U%ALfmzmUBo$0wF1SZ zUEtK7j>T})Q(>JP_|5V|*+v*rgr#ME^UZH=7qL-H>3_6rw2{_equ*j+HO}*ig4iA# zjVF6l7Qn$^1Vfkv_eP5p9-5AyoIw`p_dd{#1mN8=c~}peAD+w%2JP=ttTlR*+HKbHFw8y zGhm`5Kq=Gvm|@CF%A})mdx4D#c-G@LsXA3-nP;-cj}$8~J<-%zdg{|sZhQ6U{S6eO zCo5w?`+0+<`=z9coW{J482T@!tKRf@?=;gJpT1^rf!HIOyKa$0cSH0`J9B|jpntLB z1-G!yL(Nx+b#~bQ!Y^--cp!ob9ebrdVD<58?s zM6cWHFw^kD)1jmj`CifN9@m-OqxNKGhTHXjLCE?DH|>pTSOIX+G?ePkfR+Ht=M5XQXI|*yvK2pNJuYucpO2 z$C3)aoTy!cms-6v7<2o;VIMQ=%6|LsM^#M*VIw$4AN1#`r54F1_$)s&E0rFMCa z@%(k~c|hD<*S-a{7fxqvJ-Y&~J?xW3Y$L)&v-xaK5z4Ux)yja?rnjK|Gq#{pGq<2Z zFedU#&?0RvVLb;q(KQli@VB23Rm)S~Kc1&fV9^e`jXB)Pdkc6kIq3I1eTS#g;GhM9 zSM~cl)|*LZ(N{iWD5te17zTw#BCuoM5eUil@oZ! zWS5YmBKZwvA*jKKf2J9qkDe`1l7oIua@(l}DgaDFg`_>=&!k(Zif%g*R2|sqCnJgL zmglxZg*EQBT%hupsOHxLN*N7hx#+t1PJ@0j#`4@V+fOXbVx%!~UF0=eAmYBV<{j}w zaaLiTmInNh8`V~ek$T+AUBv;JlE&0 zKEH*_#vb`lKHE?dZ1b6|hfhz@g12W?3Jf=o7BB-$Of%gJNU@w2U&Z5@?U7T`%vLjJ zneA(&`pj0{XlJ&kh}qsvuIYx|b$xVZ+fWMoFbwyG4r*q*S&hMQJMB;V!B^+gzGyIR zQRC%=Wv|{!O=zp#1obQk-}k+sHm8Wi_j)Q!@9WY?QU01~MfvC-*vLF=zWiU6c5xXgbNslEN!K7ene(GIj9I{BJ|lp$+WLBxbPYN zX0$Qm1-GHO?qwIBnl?4l)Qe9HRm8C3&v1Yif{>!{sREQ+& z)Ne&Y!*#NW+gl@vYmU;)Epj9MSZ#g0cG_qMyEIJz`OU{ZMxQ=LJ5lw8KDD>QIu8|P z|G#SNc5G@Br2N>VM=o+`Igjq3!JD)*AhPeo10Z zAi>@RS4G}Bo1cF!}~0*z53 zwI_iW3VyZQ}MaZqU+|72QKr%17xw;*}(p2bW%4Rur%{h3xM7pg81-?rw zkkn9VY3g3{B6BBePhw=CdP|GbZ4Cmrc$P*Ju|fS)KNW>h8d;mZ44@WJ?JN`YdN&8i z15NVCaF@`NPm(P4q`E>EPTY+Z)JQix@crJz9)aqZ9zcQ$PD^)TN3cUT{zQ`>)(w3Y z_8n`!d4S^Th8o2)f^qm)r9j%5xgOW*Swz(pt@Zay>y%wc_UGHPMU+#cj0Fb~rN?Mf z2g}l0a0cw`q9bAWxR8bSxEVNWtwFTuE3K5z?$cT+dMZ)*QX~b6(B`?|+1TL%a`9k&EU>zR1c6Sj;RNM_aMKtr_b`sw}P#*jWuLz`U z*(7d=WM8tiG`6mY=)4Dr;{21bDMzywB2J!u$?w*W3SIlw0{EsWRu&}D+v zng(my-60^!H0YH35;cOiATC7Dr1DxS5~Y2E4&Qiatjm&p?w2tq*yq<~Xl2j=^qaA+ z?UE1;m|7@XIr@pUZB08~4O zW4Cd>9L+I4Ezxc-MG_P5W<-Y3syX;RIN7puMPZ7WerY#L74M_)@f})h4P5;o^j<3Tm}X{bo{_m?lef z*Ta54K~=Ki-Rip)K;(EMuP0R3&dQ2N!swYjvTOU6X%TuMi$#rieVj!IIy8$sbI_Fx zLq;p3u318A4MPv8g!EeM_j!z?-qIAv#)GVV5B1YjiFmL}GtHLo+he>!K5tI|<3)%rJ}e?+sV1HZzRyM6 zV@BAHN}y4vQ;HEabdv#vG1d8&A~7Hs>^;==GAEYFP&V2(7eS90K5H>*BokKS5{MW7 zL(E0;R7HaY<-V3`)eXt)ti@Z2GJM8##6CLiQPWg`Ix~t)`T|}EH`uoNrXsNej}v55 z#&8BhVtuO-{b3I{HtH^a41e!yHywG3gH{LAQ6c*{h{K@IoxpT7Tq7*cMc;H}_L^!^ zB;`2M5k&3{(MC4ABa?&f8yTz+dwr2U;Lz`}*QTDvcto)}pS>E>T;8QHxgO$M-qM!w zXL$%}Yz=jQz&_tL?3a-72#RCat92#OR@l#tCNAz^JDP~?D4F+dpb3?g1><70*5U=D zWw&cgdH(iRTVI%!+0$YXS}s$OXV|idkwh6>x#nB}Ec20RKK;hXjwU3mMB3c)8?q)O zS(7phNw8i_NWbe~LVDO^y&kgH(~xDozt-8LfUXSGBa4Yxg);F(nPBkk3dyIuAaH9Z8J1^aJ;^H=tM) z2;jWYH=Bv`+&DV(T*$n;lr79emL!vgzWIo^pB3Sx2kpC_PWt8_lWn%NXqb_yblxjs z)3*qG3XxVg*BEZfXS-6N#j(dd^|RxuB1>jGN`tQP)X@B+v@FB9rY(mF%!kOoeFEU0y!%fEZuTY7=7BPI~Q%XB;{_u4;J}2#3cc-Uqv+1C>^8YeQtY zai-Y7nPOtqu(}uY7#y^i$Di;BjT%0e=jA*b#kAoMq>4jJWI2&b$8_t_A@>LNwUzSd zFuOMGuGkM>bTyS_@IjQ5_M%(B)prC>n<;CEG~gAG96Uk*nePEAeg`sK)Pp#9H?5M$ z-~k=LBDrXafv7W2zCOd719faWOU{4-9%1<%%Vmf+wpuQRBTwT95BC+jU4=WFuP|1s zJF)g5Hp>N;EZwvHhQJ$LH1b;O9{;5)_X8*DV?J>BAy0k2=Ck4m2sXj6Hby#=ucq1Z zAUr3mi@&%rTzWz}5B+yKa}3Pby6n>SL4UziXwo%eThoym*E?N_r3m+PE z{fQW|c(2corA7AHZYEDor$rgYv?Ip}_^)NoxO2dT2ZU=Ee*`Wpc4eq|a&QTUq@9fY z;=S+D{!QY+z@;5=N?A_uUvY z{v9&tJ))BMCh1U|T%0>{Q4K)tr^(Jfq6Fxn3B@Mpdl~^U%#kJ%J-(11lP<(McJ$WK zWri!{ETV}2y(!}*0ysb}9t`Bo$I7c;G`=2uzbJnXlr{A@1M_(@jvU_|g%bx$We_F> z`(2bgI500<@D^~6f%+lLBLw45IqNXb1-Nirc7%LG@I2*{(&W-HPEJ+U-$I@uAG?88 zzky>XXh3y)4e&IrNFE&@w}qL07sj2S3*$1nU|RTF`e47|WKAr5kIji`>%<_xqd-zTNd1Z?rhb5~Imv`9T>b}gxgy9+sF@{)%~ zpWcb{gcxd1?Ix}aq#i!ilz`O<-A%EA{KS<=gQtt9&m&RQj{`r$8j0Do{1DGzVkkB; zSa6RoY0;{rE88OI5mIH5L>D!fxPpd^Cet(!%1?~SZr-Y~bqk8{*jQ&|=+6Ec>GgY@ zKh}&kvtIGXn%;4}`pcOm+wPBL*08^B6Wh$XooRx;S1Vw_vUb0yM_$Wt#>zQ`G!X2h zixf6fkALCE#_(A!{u(;ec?~s`9>FK-vcu_hB+y|n8f4-!IbQwU zi`DPSxZ}Ixs4L?#y7IR#Sidjhj_(U+7HA=R{#NDQs%1ewZx`4J{jIou?Bn@crPr&` z`S%$9mRYRlo1oXJCdfIs#apcBNzWkGa?%C+IK@x0V4aRD*2!41)@RFUD3hnAS+FNx zs9Mfi;~%nMyP5?n%8JI-_Pnbo=^6@-$~Z*?6%rAHaM)`Lw5as9DmB+ zZ8l5zhbHKIw*tF_f2qfgOE~RM`9(720}1~1f{r=%?pP=1fd%L$wxcHpc?$@(U&}rLQD1_-eJ+|Tk{gpqdI-Blz z$4+-{*lRROXX$!oy9hM$xBN$rc<07x((kqJHH*t9yX&;)tVbdCoAd4_ie*3MQHb@O zJTljRs7EHJ-*@uJH2W8A8!cDwd&--JK)m;c5EfK~!LR3;VL21WNCJ{`{*#ns!BgFG(;WFQ&zcs@0R^tpNWBud>k4#26K-Cr`5kS#B); zJU(FI$Zd(}?XtTS1P}ql;kAyzGGuityz{8`^bzfB8V$v0FKM>m;e~vX^O#wYra`Ob zZEvv7HW=bl9X_a|!OH`XC2v0gEkcMNnQi>8Jt6)TPaH^}-}iy*`8at#{e8uqRvz&8 z-ybT^Kfb}N;|ER9_YMVC82FJMI|>6i!${MD@jPdDkqRa6& z;YO&>x&F^WsJ#{@Gb<7H54X1a<=97tN;!+e{1!$(P#Af2j+bEul^x%p2@+1l`JkM;sdFbXXZSm2D zu5D&Tt64r}{Q;4Jt3O1#myO2k?>n#MvS9PZ434~l=MUDW9k+hd`|(>p=K5`V&8*)w zCg}UD0=s_S)MKahdnaii+y^n;_O1BwJnY)Fd>38L%`|*>v^5K1%`M+yF&YFFUQ&W-RYE97V78B%rkATU^T(*Yq ziYvDBUc-(p13r`TCuP7<%YZYt;=aV+X-iJC`1z*!Z#(NX%l7Z)zvlaRc<@^p>vj## zY5ijLu6~?W{2gbcGV&i`>l=Lx!A;hX=4}Z6k|8%KW*&1 zCrxa=js19)iG5$OWX@B6(jv}^aR+7Yz?E&QYwId=L~obsr+Hg3hF^V;W$r(9UuwFJ z0~nh=djX2}BLU95J)cU>syn!vGg>*bIvHBRTe|0z^Mnoj%YI?n+CGj(QaM*XVPdOo z?9h4>JKI9_+zTdFU}HDyAZ0h_R2%!+Z%iy#v1Cr*q!8Z<#GGB*`95Z@T<`EtXEcP1 z2NmhsTP&%?cy{p18F2iLFDl`eW9hk4XL`5&;pww<+vxNS+!`}|v(lWvlt_5b8&krK z+oy!5zetHMC~viXn)I`2N_fwo$=*Zu%aonoYhtagcx_xp#viAIcW#^#-n52Lb#8iz zJBDaYkEFM7V()Ygrf>W!Wt%ATnljdsK_+cP!i^kryyrzqybgWP5tWn`5q)n=$12?Ro=%2}?ucXZdp6N@bgl||kB|K><`Ez6WN-inU@7S@rKbMi| zr*rYJ+}HvAp!?s}W9!uYZ!=7Y_)5qaqNB49oD^jrIQhpuJXTc4LoDT)*72?Amu(De zh2k8#tZR~u8~=+!o@D_VV8VNgh7iJQ*0gYXeSK@l-NE;d+}K`Iq%&pRruxPla*1jS zEh(Xd^76h2yr@`=n6u`nQ~e?=mBeLUYtEWh-4i2szAd@Dh%HwQW6S-ispo0au4)h* zP_2enw0K6mNdWO`A_y-$!>9%ZKSzZ7Nh5(BYg*PEW^w3Cxy5-SlX>3@=6zdrsA|ZW z{Z4Q!5onI^dmL}#%LJGA6$pm!pN?y#@#Zj_cO%quo<=&w2=xM4=!J3HaZ-S{PMj_3nVKdKD%C;YHO{&7rN+ zOwemEfpQ0sDQP1J4)@6V7KtFuBz02*ImX>H#@()LC39zV6u%9tz(6yUqr}-NYleo% zg!b_vQlg0POU1@2VkVnNOo|{b43%OsHKWj|g>>hUCQ?@m&l60vV`M;zQl4ckNp(Uy zDv5l=0{YF@`&w%d7O2ZcJ?+!a4(Q2jQ$!SFk4Vj%baNSbd)D*QxYxiz((B|m=#{r1 z2wd2`lTajN=N1w-v9335h6+F_rZ-X&TD4~{nb56G8%U=xbOs6m`Pc(tYJ8hNh|W$! z$Dj6^MW zCm?7IA>F6!F0^=}4*n1Kt)vhDI(BY=IyXt31AUv>Z zdBo3FftvQj>R2I8i-XEodvzp^OpZ_Cyirg?L5{b8TCq>fyAOc%m!(KwME=EzvcmFo2EzV7=cV|$5g~CTr5ErDl7RNKnQ~XGIcMnJ)CST?l4$fh0_~_*+%}n>;NC6zVr-mdR{Amf%yx ziZs6y%gl37 z!o?i&4wu=?6;@&+(qEX@C;zp04^*j~K|;Nr>ffj7*Ab22!=_dxbHT%8ZZ{ZoZqvi$ zgcm;Ce?AqIyDeOh*W`Lhb$-&mrf-lW$DbiF_gxwsj`{+3Gkykf0q@O zLzPQmg5Xd8i%Wxf+I1IP&hCiY-=ys~AF$ew<@xB{DALfb^4+`9&qTSjL7Fs&)APwT z&d27Pc$35m*uwoRX&$I6LA`FWH&-uNSV zf@i+jKuYn^c<`rYQIw~qb-jlEwUA72e@sxGx^fcT8?7aBn%_m4raE@9fEDs_x;XOq zF2;uLsQiv@{W78!w|-estDi4w_47q7ZvC>NRzFYFs(MjUT8CpOkl=rEhp0f0UlTZs zbSPWXnzsX4%~=K=#qO%>3dPjsk=4A46~-2&^Z5)_yZ(2`e=HwiG|>KSVxTYo@onT^ zPbB|&Urmf&6zyXZi069lF**{=@Gvjr&$)^(bF*#Ki{I!GlcDw=V%8 zcOmdV7Lhp~WCJg73*>&3NQ3-Xkrsys@(-7u5af>}vP%9-eX#uZ5LF}p-DQGag9(n8 z|7Mejd^Sl?Y9Rkl{`)`q@9&XqKTQ7n9<;H@vAzc$+D6j zi@xGZ90XSIFsk4C$(>8?KSumZWDtPk#J_$tgZQ^^u_0dFiG4)z4|)%kpgR*9Jz>_9 z_2@~TE9uC0OLb3%5d?kNFGG?={IhPZaw_`>;@?A(>OQ{s=l-{ee+#~#5j>Ij_Z@ON ziGTNaNp&ENkqGxS-9}O;@o(Dh>J*;qN7q zVb(t-knrb;w~dnh)ITff!9M@i4t{{>_q~6h==b;xQGgy#5jcx}!>Ba9{#Qi5oD+(E zuSoR!0Q+#&u0=?e(*KP$Ay?578vUQ7R37g2HG+6-+my$QMlhDDDXODoof(n~=VmM0 zPpo_Z*jYlHq5Oo-`^w^(NmP>5fcb=MHRTK5n@7}uGurBph1_?o8Zc5+;qLWxfKt{_ zSs}#`Zvy5VFiA3NTG8~8f=bX+1#&4%yV$4p+P`>u-ZY|G)UNge&l&_@VS--!2&f3h zAV~SEL;_6`{Cuq+dmZ`Jj11=C^;=_lBB_t#VxBkKOHYLQGB2J$>N~Tu)OTfPsn2uo z6XI(GGoV&C{k{Wru>rU5X(s43jG!IrbBUZ3YCAU`)I+G(gZgLB{GCvvGZ|3(ek?V+ zFnr(Wkl?+mXn?LmTaH=|Own+c&rsIUA=_!hPm*wU5#lKd{XsUrQgX^eR}f-zn4-s z_0xNA37yR%{O{Lnewg%^0>d5<{_{7s5JtCpp;$q$4JNo~3jqeoe?v7^P3BLCA{dST zlD;?VGm>{gU5tv%YWLGBGISi~1d`La+PVsj-sy?)Ra)!5icCojkt%$7$5-jA!$53k zOSrZIdtAoSe_YtlXD%S;FAX_}1^J>&=sEyh`kBCjW5nLyDL8*9v3C9pTqPy^OqisD z#8B*^;uF9VrQstzk|WEiFWjY}*4GIV?#_-TbW<|ANk?!~po4ajFUEjeSw85MDM@+# z3iUfAzr4D6UQB;LI!Q@Z*@yOzXHxwEQz3Juh$$yCyZ*!`5NxL^@^42k_ioRJ*e}XQkgsSz` zd%L+``rM}9k;Cz64;Rg&#&WkQ?(S>)g`YOxPdn7~9n#_&b)$Z3Zc4pn#XA9Lw0q4> zH+qc-R!_TkrC(DbfpEj4@!!=R83!5P0_^ zf+8G)GK=Zt`nF`~_h3=~i@94U39rMewOzfZgP#3EpM6hLzMn+ok}Fn8!gwagan0d+ z!y4~!fjT6>P?l~tB>k9_d=F&c{N{9r)nBW|{3D4H@&=>|OmE|px7*%+USKEt_EBKZ zgAp^Jw}*e*F6W8cc}l)srV3z{bj9m>TlkB#v<@x{WV@C z>TfAuMs(_Lsrp-bEH<>c@&So`Mz})bXN4;?epa|b#Xs6 zatd8f^?07ZS)_Ayn%-RJiGBYg@|`cxMLewa<-LEnfEShOcc-V=6GkH|S%T?Hb|cPz z(qPA_1fayh-xzw?NZ@J7w0@!d7sG8XAy5U_56cGJRfXPD35*ymvM!o>4bb-rN7U>Fys1I>~!zi)J=r zzcu}}(jDvjWA^udK;EmLNRLuI{z%{~(i!(ndsZUv9ef{!Ub{aZGwiD8sa~IyTV|@q zIlBm4&Ss5qih8deTTJ5i14?8+=Eiy(hrrDD%kBGHcABEk*`laSVkJ0VUU|jk$()0q z4rU>P)pn6^ni>%sk3VN>@F%{apzjy1;HcwN-_KvharDn*eeaWP&Z2o!uF85QYwm^I z8~ton+t@b8U0byz`)h$LH*b`_#EQ6~kyXvdzLb?UCE^xzjk>Fxs-~CeqB5PT`nAsm zvZh4c0{PcuR~^m@{3fgNIcL$ctG6F}77(%qu3WSYr`zbjl{Eb9RcgQ2x=VstFNDc_ zu8p6abZ{OaXBgE{EH-%+`9^iNgBb4MTKn9xGit-dF00?H)vNmIbI7MkMCjBUE*eK zXO_DgId3SuIQ!9otBY6Hw*;$O&U3<-E-$ZM!dXyGb?DoHF>JB^THO#BW{=sd{4E}! z9Z!UI#(#+^#f!EimYRmj%xx@pH^WPGp}|?4fx%gPGg&ZKvE5(7^Bwyk6#3EOb!1<* zFH-!v!gnJkK5oBLe3;F3@f&5SqSGle^^ITT((_coaHsevmzr>3@0MWHy{0AVj@uiZ zx~{1pD{Jcey}>h%cRjrT+i`U2CcVP6b9~Xb_c${6^S=nT$B&i|Z4TFdO{_CDBR`Ui z4MXWO@y1c9_*q?@sT*xwheF^^Ze;2zwa3RGr!;;Bl;KF2 zL;0MZ{GFwd;tk+cXzE%OudeUv1U5vct`%7I=G9p46vvIB+Nk41mxoUqvYbR9*EV28uPX4vt;0~-ScNq#qmHchs*}pMECieQ~WN# z4|R$UanjQ{k>X8dsXpDKbj6)mQs}sYN}@dEN8Rxy1GEBS)h)S9WvYTprQEvY5Jn=8 zbPdFN$q6m7>K*e^mvTvBpR*Z@Xe!h#QoNGuHG4;k*F(OUg+oEsS!o?VqvwrE<@Jmd zuOZE(yQ3SGJfEIb{tRqUujo=ceQ3v*Lg7nc%zX=#2``?B5VH6zfS^;iBa18^hX$c} z9*uvF8?cAbL8q8gM2d1prUsoIEv^SUXeM@ypGhrK+!=>?m~b>Uw5jr`Sn4LuZMhR_ zb!+c|bsDLhEPgrQ9yL~1eu}z`Oy%W9i&vDT3jQft{Fc{)HHVxvho-pk?B3Ls$8E{B z!(6vVas=nCe17BESaQ7){3+cl^e4^dhumzRdQ?l=qZd#BDJ{CmcGX>H!bFR?8hSxp zBv4mgeJHlAH=UOU*RyXe4d2{;op~@ z!L+S1SG^oQFFJ6w<}t9rF;lq$)l9f{s$IwJ^l_>DCGGkxjB|an`{%g3q-hh3h90;L zF?VB=zPBvi>(h5Rp)%gky2+Okk`W-Q- z`(Gwy%;eR4P$C*R;!oqVvo1;Xx$F;Z(AJ%osz1^2?{6&O=ac+hR!H}8YT8kMxaX9r z!);x|m%diBsUrIze!lMMBSpgRASC&TH=_r^)Z{aK1%6Ra%nN!AvZ=`h2%^Z+z&I%6IVb^~d`Pe?$h>Ig4aO z(t7S<1l3P9-IIHR4rjynY`-7Oqc*ZG7F=ZKXA2DYYA!r5l4T0RFZ>tkTXIoN}Gxe!R7pgdvO%;`tMo`e>cpf7O z_ZtKz!Tpj+sJhJtR}dtsuH=`QV+NT(P2$z+_0=JMF3aI(G}L@yY1dR}wi+?>Dr99O z+h=Hksi@qfelk@5WfxExN%4(Qss5)#Q&$9#ZOrUO z0{iXU#;GFOKB?1)F`Q#eV*C8xY*Q~$kh(GuSZ-gv#U@{B3!jzE+304%qJc)ul$kU} zVgeOTq>N_G&Yq^sz017qe#Hb;-y|?ISM^n%qN&I*R@HPKSyi`clC`oTiK;oa_}6Ul zMAcly>A9g$$LP5z#??@avk7n1z-XdpNv5OU{h68Jy$xnZ1AmMJ-k>86pS~m>{5MnY zgYy(H8j-*<+sFT~=?|E6bse(OJDWT}93ss7tt~L$6yVSlK;^%Ax#}sCSM_6CPenJ@iY9jP)!`PzbcxF7mI%O@-W=}iFwm~kU%3!bKl~T74uL2s}GqH4^}Av zjkT0TJuS_Q1YT##5j%tzh@pLQ)!la!57tmTb$MXT;lzUv^O$(>+x$ADB&vR|c-2CF z$*uaGi9M~~2Y+gQzsoPj`scGO*C(p})8zl0U%*Q|SZgyOMv8q$nGfD=(=N7YKQn3H z<>1f4R39aaroRURlxN*QV~g z^O8VTWa{hp-UAG+`BUFloWaVUx=Be+@ea-<<<>0lJvFG0Q~VcgTuTt=kGeCE{3=W> z5%-1`cLt*0`pTrXKu4V9Inm_hg--G&ZWg?C00IvS=ydHLr*5|mzGiB#Kbk*vcYBNP zD-8*c(Jl%A3@rx^IH`(@IE6MC32Z;ev7KDS;J#Opdr+buPtin?Chocb+;!0DCnz8t`R!d2^wkxHgwJR%6M}SL9m)8FtNrp{S3)`B}`QgPE7`7c= ze044fm-UuJT$-xr!8aW*vz^s=M5n%FX5>gddu2O7hj?6T=VXJK1YKsPnTiJ33HLdJ zUAjBtC{p-dgbGs^vqIEN%eN85&x|C$#^&+L0g=?`Q1Z&c_NHvDsX;v*Hi*ML*;@9ZO*}ZJLs!4=t^bK zx$A0tmY7UD(A7m7v5^Ui1XkJk;ZAaw0ab@|ll9}`mDRmxok717zceO`F>Rey>9`a>Y4#~A_OCOxaQ_S5PuK9Gj z{V_>f*o`3xuddu{n!bSiSn8Q9s6pIa9ed6;5x_TMEvepc%!>)8oM)pCd8%h`+z(D<13&+%1ht%=&~#JAt$-34LiG zKJ@ja?_W~^67A{8BAOi(F?K_F!mYX%ahOzr&wk59PbRM8>8Vw>&ckQ zk2>JWPYbY zyJM*b6XXw6%bBCMCR~%`4Tp`7>8eEfSa`v@a`agS*ln?@`h=zt?P$%PZBesr2o*4t z#e7e%@z?lm@b_=jWh(5MDDXE6xs}b@+%SX;--gORYCma_&F6}>Xh zO&X%T&7aWfS(JWfDesKro&A-~+&tFYg={l@{{qm$#p)%!=}H=(%$JCD0d#IL(03mk zu$!i{xj!!stmFKF7kuE$-9d(~dNaAb`3h4c_JZGd%pIgz@uzybHy4`4x{CfxGlwLZ zeUVqg?&hCR19$f|PsKnLSZna5`B#hx$Gd0Nn)%Z9=37j&<%@h|YsUsNXW<2_W9`^r zE+!~DPtlJ#S-W)+#NAJ(tM-S&J3RD&Mn@aBdzpp060!GOrm|)W$hnvlT!yFl0h{@6YF&+~)W)z*IG^_8DqU*$tz()wCz2GM}n0*J>C z5{s&v8Kq{OxT(&1`i3-q+Ql_vZ_J%xdc4gnuv6jvKHt#yc4@@2>uc8Da(7mX)|hCA z*SnazqT+lZtgzV~ySF?!HkXiU*H<<*kC8YLSlK)hNGKV5u6+TR;uC;if+@PK`I8h) zV=DVI;V5fRxK|f*9f~>>-B7u;`5?6kzYc(B8T?P@eQu;As@E3@76qsiVFr&@ z_2(Dj#%_H@SGWEkO62pv>jV?HBru|l394*dp0mA&HIZ;`$eY^*aZX{GYRkFCSeA0$ z9c5y-zHRa%Hg8#ziM?aby~~a3q1+xw&~iPQmnM8ZS(1RD{Dy!Z)kR{rquy!66PJXkAW7 zHLdTFMpcIdBF7#a+Dlq1&s2Rg#~-u`d_b7?4u8C(I&OY@3ZBeVG;@2Hj=!OppgM{> z^329CzZ}NG<7V@y{!!7)w^jD-a6cx3Om+VN!*}2%MJRKCJ{%Kp^y2_ybd0_pW(wwp zijtwCV5A7^L{Tn(c{*){Y2<7crjavO(BHl|VQHG*X+1S{WvzKeJ9|b?I^Wk`s@wi7`PhyWYmbtIg!9CMu+^TOdWFFaXMsJ#jf5Uk3p=SJX`~E zUAtN-1Nb?cNF!mX@NTrS)+;uE2gX!bC2SHFO#*8sX`C6U^26I_`R-Z z2Cjils-!J^-*=%t__6QN2|hYBXZpIGpOpSv&ZE`!%*v9I>XtSk$6Ebt2-lp=8**^( z##W6ZE^Zeha7<8m`qV;|c$=rQ`75XM>)#@8{RSn!tXDKV(`OaZ%zCV6;q^krqr`UV zNTJIHDCrg6IzTd5wetvX@7zbi4*nREojcSNgE*bDhNe?eOQn5a8B`6f8MLho+N%^k z=8d36_n46M*h}G>Pe6%z_iegJ@P@j{N^ewGf#8NZ^*4M2RcZAf*b01146oAgG1fPA z(G^YEZW4gtnCalAaP4-`mD0!7(bu^JMR?3*&Xrj-$DuvQZ>EL=k(io(ObuSFnn|5d zv}Y|p(>LyX0{itd3_Jb|NCa8UVKrp_weP?De1wgx<~@ctb+88@`#6hC=2~Sw;90Z# z#Zs(8W175*_I=aj%o3j4O_OJ1y!t#QQm1%7%2`a4c)w?uCfOxVaVPke$(G8eLH)cU zez=B$0j}q1JmexgeH%}lV+=h4`42(zrZcInZ}AMB(h*R*A)U=HLuR%xGrJ*hGdJ@v z^DTawAz!bv%w{$cdHpgfetk4`zFx}a-&%V*`Daw`8q(>!D`7YgX!TyjtCO^Pr-G%E z)-zvovUzACGw@_Q^J*6)~`<>x%Fi|$&VoXdWj}> zNV|Oy`Wx#spN9PpFjQy`6lYFpEuS$Nw!Dh=V6TjUdjA@K>S1%`BK{ESTxLc&72`yfclmtv%uv;(9>~GHydU*d~dAiVx|8wrvfR z283>#F*7Q}yen>eovK?EHzZ&**r5xRGs3aDKw+iHor00yUqGbA6V+yRYLhjGhWM zpSE_yIv&#G7Fne9ONmQlUfey!}@Blmi{obS*lj;(@}S;Qf0g`W`G(OM+i7J_ zE!3~X7W(ao60>yHDD9dOux#sV#9wO`zO|}?srvkH>JEOcIjlnF;IH@e&TGoP-84RP z5+`UC6xjj(I-{5#TTxLhg+|)ix> z9oo;kuQl+rNknYZD@w!lAp9C@bdxyYCZy0AD<6}56L=Sv0hybz5>a<9QXo;DW~^MR zjM=1h$C;!HVJUf&SKz18dx~4i-)JSqi}EXStF9}`H(F}W>*}LVcd}T~m3<>fPQ97K z%F{_NAmtP;|H>a&Coi-*AyT1MCm6!+0SsYvf+2`ellV0l($B|`em;iqHPL*kr+{}U zY1NBDx20+PP3Amvhw%r!RvYD1kDCya3OF~zvGY+a!F`32|XUwcjKl+*p_%4 z4^vy>R9m9VB&d$QcbPh_XfM&nB=q=tdx;BeiHG<5b#%8S_P^`5a=R^&-CkmX65M>V zRqo(VS+#2da-x<+p$VTa8bHW`sVOSq!Ce=18^*YQ#Ep6dQA2E$&pBXqgw-uw!ZnA? zL*T64)!W{!UIx9`+~l?dD7##r{+6Kmt8J^iNMC80CKy)RL_gaELaadOu-H9sn|q7; zG1CLr>X4;Eo?|m@$2uIi%t&)I7aEr%CN` z7J;*97UJTJJH&;6~XFPxbu8pN#g0E`&G2ElA@`HO~f%PMqgyMDK(js5Z3XP z{d}qzoeVYVjN4D>1M?Ec-Jq|{G=T0#oma0S8j-@b)j(M}PR{%c++o%BB(=$F`Ish$ z6*!h1Qf|{JOpIa^OsthM-~jOwhIB~NH&M2$isl_G8|@!sDKLYvdp2N3dSBC~GD=tw zI6lsOtf(Kk%b6qs8qy(F{dv^q=X(usT!=@!>7O{GOM1+%6jC2-p@)lZAQKuf=Q7mi z=xgbdDy&^Or)c0x;`kMX>l<@>P;;9bx+mpmI~y3r%v0*F&GA56jOzkt5OHKgA;VOh zD)`o2PYXfhi;VZxGXfuE>ve->&8-&#&2HK=#C(IW9ysZNimC_u!xz-ii$&(~s^#I& zH0%%etSNe$_^d9G@Mr3771F%*Su_3j4iM6eC$DMT4>YIt{w1No4BY0LCVG=#5p`eF zv|nk$4mDMnsWw;~%WYbCD~|0G*bP1)T&w-PXcjfxFy(>f-{?8jtHL(-GXiJPt!i!y z#vGM)r`Qsg*%D8g5)~>@M~P<9zX+o`mH~h&himtl%30o;P{zxwU9Dl_;cA_uB2=3Y zOI@1V^agP0n+?rm)-%REn@`8a?vMQ}T=O4>zCLeGJ9v^KB%U^<$g)c=*~RS|t~F=d z_!U%qR#{gL|sm^8Y}CS#!Tx)mEplTePMvTr>GF;JzGa{xYGK<81rkOw+E5 z>>{qytkJjr|E0crXGJmw5`XA(JXO-Q9Jjuv=Vvlw;8y`-Krzj_XuyNKuAv!2cJncV z0k*?Xl&HHG*Uo?XDxW9RuiMuAb)-Dr)bv=RaYM*0JGw~Aq4~?8C|0g;T0ZW?uT(0Q z#PIrZj1~0=G5yo?eDkEWKWPx^{b=o0sQFzL`A+pwZV-L=Ma(f1m%}XVQl1f;yd1;ive?jiL(xa|H;c23z*!_k zSJTtq6DHp|Agf|TZJXwQ&K0%q&$(>atwZMCRDD;`wCir`N-#U{jX97*zCWhj4ouIV zPnKfyg{JZ)rt))C`IS^|Yn}T91yi*Kgrq7xac^)zqHDDfMZon+P z9N^*@JG

>>D>cVO&w9@C*&f*(ua;i#ioO(IW^OYI`El8P*&DLivc1xHQ9ONEGDfD5KbOvv-eAtkqGe*q zU`dd4l6V61Kw4k6NY<9#MZXk1qPH{6n0^u$P051go#`m1T-2O-U(!TsU~(iT*-7bH z=^xA*(FKX0>^jpfgTKv6qqU<!#_LFp%ESNbc z{#`m>x`N5b7IgJCFQhH+6VO)!^~ygl5`WbqjRNu=yk(q3WQ6=T z(U;OPxlw*udXJt85C>BP9(bf6_lozNV)$Go*Kz1=4A#^Q&~8#E9RC&2PQ$>o=%sF7zy(WTJJLHa%Qr`E$e`#XJ&fM8 zR6K;fz>J{pF}D?;itjPc(7Hy6vw^*aOao~nW)9t0(o`CNBcfuA9*5{;Nh))cb}(U* z6SPcnThbTq2k5r+d9PAtD*cP(oT!b&pIM0-+Q7`CPthO9=1W7xev)DIV|t+UYo;e1 z$~2SRrI(83lDpz1vgOj{(nB=Zw-p0`Q$2H3T0r|t2hv9R2z`{^Eq+%brl&9;(W~e| zk|oS!FFi1sBiY25Bwgqp^eIVK`e){MdOrPJ6v`ZzACh&FwO191FG_FAKa&KC*U&$q z_xRv1RN^D?mfxmdil5V!jGEpd(MhEYE%jnb#P>xB%tbX6C8*Gg%j}@5Q4f1(L1Oxzaf4d(07WjC?P%UA$kiSUgctE-PiCWVgf$ zxyI|9*pJaLP3Zt>bNmjYm(Z;x%Ooq&&elo3k<6y^={EEop9gfA_$5;+_K~WXDHx4b zNz5`UsSot+p7Kr7^-6E?EP9}PJe?xmE&Y^k=Cw@ro=V1C6P;H6Ar(v7NbO7)iBmGc z`(yf+WF5VZeuTF5ly*ttqzmZYOsJ%kd0jF|w1)m1HRB}>#Mt{nx|FUjYb2R0&Y~OA zy_gnE4{52qHGKtnSm=$C=z1r^QTv@qKBLEK8c`^^N!s)Pg@# zN}r*pOG0pMSm~96woKZFluo8UK>ShCakQ1rkYS;jX5j5$n2Bs zlZ1&T(jBBuX0$w9)(D z(v7msz|}E{lj$r@mW`3p(r)tinTL|E#G}!Qf0wM5tn^Nij+1^Sxrn&^=qr+FW&m?j za+$d(T}3~jKM|d$MN*yADl@6X^h{|J*$T-PQ4Sr0k#w4BrtCXfLl?@PGG&r4BoFC+ z7+s|3LoTMPL_yQy1oWXHv{WXQZJ?LRWzzlPrQ)TMRLN3Fu;?VxnJLD4fIsV@M4Loo z#S_J6#QFH^hW`7lVkAb{ujzC2bGj);s3gp+>zPx)T|;S%lw#CO z6Q(^A%Zy@j;Io0*!IUwVm@39c+CbV`8Y=BCO_AnG7fL^pekmh^#CE>p?OGJjcsEEqkiJLcWjWXZB|vWYTMM}@MLvd?52 zWZ%km%J#~R$bOSm%I?aZ;S#xzTr0Q9?eg~WF7j}Blzgy!ggjB6CZ8#vFMmhARK8mN zrF^q|i~NxMnEbT-g1l0GSN;rF&nL;J$>+(7(DwO-$NZS&gWby+0` zulrtAUSe;hx8B>&yP7J{F&PKFxfBd^-E|@agRn;}h>Q#wW{XqR$MUc|MDL-uKz)^PSI6K6`wA@j34E zhtCzCCq6HIWD2FiqNt~6rU+7e=CjV{Tc00%_WB(1`OW9F&n=$^J}-PE3YEg3@K-ca zbW?;W`YHw}UQ;9}#wjK!<|qmkOBBl$pDETUzE%97IHowExS+VIxT|=K3;a^0O=(vK zDqAVLC|PBcvY#?lnW4;6PF2oVzO7uU{7|`BxkXv5+^0OIJfXaxysD&pq&{jNqmSLE zsZT4P4n9#n{d|V`yzZ0clj$?bXPVDapAUUL_xZ|ai_Z?9eLg??T=2Q-bKB=3*af5t zwZf=qsc5U{st8p?D+Ve?D&iHniZ>Or6$=#aDOM;xRjgI)Rvb|LsyL~*tf)}jQ#?^9 zlscuavVpRtvaPbKGE})uu~V^MaYS)Sab8ibxTO#)rO(KUI~g2dZbPAXPh6H&vJ_Mm0$Fnkqpx z5i#Z<#`}oz8Di{F9aNR6PN}Y_uB+~=o~o2;z1mORP#vUhr|zbPELpWfovO}IPgYM? z&sV>#UakI8y;;3Qy-U4ceN25qeMkLB?NT!ujmD&@uW6zQ(e%_rYGO6RH4aUxCPQ;o zeM9|F{ah{8C^SZmucnozgQkau)AZBCXMDvyAYt25*&zj?! zGn%WK8=8lj=Ng^XqHUmUrfsY3tPR!n){fN1YsYG{v~Ox>XcuS~Y1e2sYPV{C(jL(M zqCKhoLwisAL@UzCbUK|y*Fe`yw_RDHJg7XXJfpm*yso^Xq*dN3y~?U;tZEL-gs29p zhNk)gx7vN~Tt-O~6cRbw_nib%eUV zdI&I+te&Qxtu9i(tNuv+sd~No8+EDru=;oPS@kvbO<<-2rj4eHhSdz#jL;-%(lk!Z8^BC~W|ii1%|^|4 znqpw)7htABb6fL7^HSrbRRc5iw4JowwY{{_+M(J}+7xZNHeWkeyHNX{c9r&XVCFk* zx#pJUvF3$Fu2pHxT7PXD#9$F)0Ah?rjOp4r+PAe!v@5lrX*X!U)$Z3G(Vozr)0S&* zX&-A}Xbn1>u8}TK*Iw5}7p{xajnXCR(skLosk&LZw{(kj>vWrSKj?~ehjhnur*#)} z4|LBkNqOlFdYitHK2ZO$?hD-}-S@f@U8(M-sVJ@%kD1dHO~A_w^s^ztC^ef3H8RFVmmZU((;y-`7{^#RikX&(Ors!qCys z%@ASeYe+JTHRKp38)h387~VB}U|4VX#_*$Im*KFX%y8Cl$xx*g>wI)tou96uu7$3R zE<)E=H&{19m#iD7bL!sEy{r2`w_5k5?i<}U-7ejJ-C5lwU8U}>u1Y7?`{=d$0DZ8& zlfJt?QXi`ysvo7FpwH9i>*wm<(J$4n(tobsso$$VqW?{QUjL{5mi~cWZcrJ_27g0< zA=uE#(B1Hze!G5;{-FN2{*3;L{<{99o;D~AdP6-!V?&UkogvyV&@j>vZ%8*}8{Ra` zFuZ42VffUr*6^KSyJ3&vpy8t7n&FP&kwIjX88t?evAMCeF~r!@*vHu4INazkPBKn2 z&NCJnml;1Yeqmg1EHRcEj~ahBUNl}a-Z4Hh1{zx#I~#i#qm2EG!;G&Rvk_wkVk}0C zj}fETxX<{D@woAV@v8B*@uAVnq&8Vh^-O`LR;JFT9;P_cNK=w&tSQ&@rfIfmf$1aD zr>6C$Z%jX#_LvTv%1k#*_e{@CBD2D*Gy9qwm^+xenmKbHbDVjkImtZMe92U9x@&rD z5}V~_t=VjDVQypYVrI>K%>&FM%%jbd&C|{E&2O7OFt0R!Y2IMoW!`T-W(+V<+SCN z<$>jeMPgN14OV|^BkMo?|DXQ@e&z{A@U3IA^$OxB;e5DTpyfqutmP zBVz|+tZ}e$lrhnmVRRa&8fO`o8b36CZv4u)#kd0_&5PwM?-W|l zt)VR zNZ(lBp}wPhQ++dh^L(fJzT>;pca`twzMFlw_!j%_^F8N#+4qL;J>M6;5NmevH45zro+;-^9O# ze|!Hf{sa7n`j7Tc@t@$I=b!IC*MGVHD*rY98~uOqFZMs+|BHXQ|1JN={xAIH^;GrD z_5AC#sn@9UlE@b9~JKv7mL3ZuM@Ar3ByA1JWyHk#2Ml-VuyH$xIgIkthk%Fy||UQ zg}9N}Uu+U<#NJ{Ge@{dYM7KocqRXOlqEn(W(P7a+(H>E;XuIfp(buANqAx|Ch*pZ0 zi{2N#D_SU8Aet-6$KPbpL{YXVLo`-2MwBRWh(?Nr;IF?ZM$|{tOB60*McqW5MeRjx zM8TpKq5x47kzG_@jNnYyh!i4kkJoJxTNDySY8ADT`WLkvT=VZ! zOTa(Bhu@+GCs5#)P&&S_X>P>1gclilD-&Fr0(;q`FgG!R_A(eE;pyhTA|IKrrM2w19+w z0LThxj8@%%vO|i1KjaBmAz8o#83TGq8_@7QKmj=fUg#52oG#^Mv#0o76a0gSr592TFryHkv@SgW3bTM?}a( za!A{n%1Gd^q-Hwf)5+1UaGM@Cl%0Z@kT!y2ZcehpnK>>w1DETwvNIFnaa9>kIpfl@ z9K4<9J7`VeST!??m!L6_bM)&!*bx>wC@P$4z^9y)>Bvcr&rVErcwqf2y)7IG1EB^A z?}0`COD3?UvGpa|23Hx#*hKzJ!=D1opD1HM{38a#^z;n1jN&=7(7140nopZjXL zaNcY$zRmIpP>tQXV5|N6cjva(P`jp0Yb?K_xS8F2@dceB&Fe2FbHZ+yvz88mGzN4iGFP-}d|k zo3fs~bgPuBJ-_lBk<|74iJoik{u+~@xzckLe?Mo9+y7Qi{#wq4+dcXA^~P-Be$M^g zEJ=%^j=0;|Q$f$aD(I_dmiI2M66~xuyZK{N^Rgqq_U7I3qcvLnmH6?(4}%{!a}!FE zlU?WPKvGVPw45AgauzvlZ_lUV@}x!TCoJx6WlM*)n4;7#A5boJc)+ zQWk%0=2dp0dgz0Ca2NQZm1)t6^!QbvCHcTCM{8<|o@zkLvr~TXk-f3`Bo;h zH_yEn78!F;p8GHPFwcgX5A{E}KSLTc4JC(CK(SC9R3ub1R6f*fsOk@mKc92}Fc{@S z@gJF4NQWSure3!Z_#c6P{u}+j`SI!1`XP6Fh~yL^H$@HH=zt+3FE52iOYz6;7&|W~ zg-A&uGE#_ylwe*u3XzRMB%^rbqV%LfF@ACwM|<<)xzR!#wc|^&2k}Gb~fR~9P7RfN@=rI4(6E((+)CN+?yJMc}gE?!6=rvISX0mM2o1z(_0?|974@9dl z?`;xo75yVW=Krkxm{RG+#i3HNw~{}0jrJsPLxLg5*fsJ zc08(9I1JT1Yf)(IkkCPnK~WeNwsSWo+pnh_yozcj^YT@IJxE2&E6|&SOn+jKd@g|D7nkzNs8A!_m2Kn z|407LKk|26|H$7F`o}-=cm9#T^N;+Uf8_7{BY!9VANf1~$lv)#{?7mP@^{?wMR*>L zg#WzjAiIpeBZvKerF(fuXn#)&bEJ)rACv5+eu3&HY_rHd%fo(By{jSwIFBQh1);M} zCy19k#|Md*1t~OciduJjTPjfy2~y3bU&{+SplVuNwR22VtRph6SFf1RSf2Ak*e<;i z&b_1i_i)12(aq;WwuM|&Ohhc<;UVA)%t6?a@oYeKyxqGp52=S(3AyL5!rw&q-P{P)e1jM9t&Ltu^s#^)+*Qx89QC;CgT*H6-NS%~!lZp%e3Yw|yaW;r0{BA={hnfdP!YqX%;l6+(VYfh$@TE{B&Iu?I z?-~?|`xuJEp9MwID1;*EybDFrS^-7U`vi)lxekh?`wbLHdpi_Ke>W7#;}8_drwoeZ zbq0#$cNvQ0SqVk*y$?n5ehx+Qp8-W+m;*)ND1aic6hRSq-hm=8;k8m8t`DFS*gk|J z@O=zLVEhbukpZuG1VSQLa*YHkB3lh2p~xsy!z5VS(LFzr zVj@Qe@v0lJ#+EaAd_rb=joniOUKd3A1Kd|10l-*|QJZRzInF+1iap>}Z3q2FCXUFkA}LCcyfej|{VU+2jBWc_!rHKrw+II2{7_Bw>dAo0x+0^yxdNuiSZl z`ofhPcm8tz_VjrRm#+L`H%7B zE=0JYJ2=~VYy#!>-)fx?N+x2mSO|@d?l%;q+;H*~Ky*ZG@4=CtXb6G1ldzfd6kxt} z@@)<$m1$%6nVjcs4d4Z_B_(G$Qz5;7e3}yty-i>s`gwH&{!h8#Ad6Ory`?IV7o(K; z$khD#oFEKM=;RX}69ntX)}we9*|ZEt4)|*`YCQON28j5y9Fn;Zitx;m7UMZ@3<~$F zywuUwQ)opOJbHKxikKIa*Rj1FvKpOfc=3X~bpd&VUC0SCgcBv9_vYl-n`GHBLZJ`a zg>_{PL^wj;B4xJ^Ny~PEJ9FAH*%PmS zcBYevgLKEtOT)T@AP-BACX-0GxQuZbnRyxZteoWBq)hMxr)NT@B$4$9n!Ga;1FC%@ zWJeN*CP~2p)c-ji`k>HHYlZi~RU9C^4|AcBpa*Bw?UMb!tUC^l$IXa|ID;c^5(MK` zL^}Rzf8B5ecA9E zgWq^+Jl;#N<8_5R#Ph~`3FOQ#xt3c?_(sDu1Fj@oE}udKP6Ww|3CVnZLQXa5P}S*q zV2De6hj`0&ic zFXsK)^PByn3j-GH>-l{0%Kmz;tS9|!>W8MFCEePN=p9GwLY(S*6|7*FyLCUeZgA_K z_AP{>D9`wd_6Z@0fBW6ZxfdEyCoeXOuft#SGb)2na|XZb+vLP4Lu zThPZo;r0C4!F)eDs!Qbc*(a9rdh+4JM7KLuiOF4(@`;h1h`xG>Z9H`L&wsUE4Si9) zJwN^qy?xV%;}qdk{)JAHcZY^kt4_`t+J0gy(uRQGpAU-@6{oeO+a)xGc6 zo|!-b0S0+WK}Q}oSi~Ws#z!?I;SmflCIQi6GkFXoC66%=3D)X}sI>LyTx(lesU05L zpghLsLFKd~qK8_mqeY8W=@hM|E$Y}}i>J1|-~WD0W_Bj__S|#NJ)d*P=kv?&x7J>3 z?e$)3?^$cF<-aN|zU|TONxR3C`93)E>e~}8ExYrTMT1^UhRO(6|J(c3L*IVrpeCCw_y{oy?)6~H?o7+4cEwy~gnXfn3$rWDqbnva@K!c}XDIdZ$V_}WK zdg}Ce*HBX%F&0d}z%#8wzH~gTqhQ*q8J=mYrhE8ubfA-&*5@%$QqQmZ+u!zrVc5!;leX|;HuG_tS=qvmlw{V2nEm<%nb$*eGtH5UZRU$I%>}mj zdu(PE$}C@HZ+|yrUN5%AFI1X&J!A{N*mizocuS^xyII|wd7WWSfA3*+^W8UPrY~wU z$8GoTw3%}kX8Kn)v)g7KZ!<@}YKvbuGrU}z*=;j>Z06!iGQ%srFw-2n-e$fo(;P9M zi>&;aUs`&Br(pi#rPDpLXP!UP>nZfkI@^0r;W?fHmY4?Gd7@-N7;|Cs?}Ymk`E#N^ zoM7`NZ?WiTS{Z`M`B-6n;#v4ALqBf zH_$P7=q#mm|a6Px(B1>Cqne7$`u?kM}D<5jqI}5fqC(zXtvj zSbz@0tNGPzxwwH}0YP*EPL`4uwD2AL;uRM6uxqYT8_{mK6Kq0<;Iet7AMJzh1W|MZ zesaE2kDz1lP&QUSk9NbSmQyTf4}9uErQQ||&jZKMJ~+slrccnqL-`K==$G*ezXWEW z6Y%OKqzfH{pY|!`L&xE~O4j#^d-!G$LWkkEs!0nv370Qbst4_ZuLFC~A^2AyCT`$| zuOgo482k?C6?^#7FDi8u?Sqf`0h)ym>QRvYGu*?keTg`u6YxtcwU{9qUK=96&>{F1 zumT;1OKw!kkM_Y^K_fZ}{}2SxF}N3WqLXm$I?4#`hP~iAwD6xn2rY{zU->Hg*Uz_)^<=rG)VH)Vtl!KZAZ zejLON{4FpZ9f7O9r_@xmAD(^>brS7`OSe!D(LOi|{Al5yJV1KUarifn5r1?N*8Z9J zquub6U>iCHe+Z&zHj1n7f<5R6{4Cgyj>CU>inNHEeXNrJZ;O7K_&h^hM|qSDmn?zf0^{6eeg6Eokr1K_;PRn?T5bx;^;8^1UQ6_ z!M_CwbP}F$kUE6+z)ymtxPk9|g%t(pDEuODy-L2p)vuB#Xg^$dh%!YN!`FkU=ny>o zb?P?S4VQx=v=9C+C__i!z%M9kbP(PLs?l-yf;Z@Y(8cgWU)S=75DIEzoK74`{Ad+4s;wo?FjjX_QE%UN6=w-C)k6I!pFg0 zv@G0h1Tl0Fz8maEN8o=22hef&Z{T@x|2Fvn;%F}%00+@QxECbQNqF?HX**~S+zpcG z5PS$6Lnq+EcZdg?1A)|?;1hHNzC#uf|C~6(PXjkP4!_aM!UuE$KJ7QuPqY^vag_W= zyWyALCvU|KyzKYnA=(cwJI=Q)M8miLg*t`~!yhY6?L{k1Q_BZy>Y%uRf0?hTqv!;D z-Uv;(4iQgy4#-FQ;GB~*Vt4C?703Cv#0vDm{1zxcCt*j4re>hs z@HF5>d*QiYHrfZ@35w7W_~ugb1RaLYDbrLLx)?rfF6lyh;p;&)Is`ulmZRfvY@Vi8 zpoPcJ*HjSgfu9DQ;s*X?fu=%eRj#Sq!6tMVe*7{`Z9~UkSEZ)nXgBQoqNWashW`e} z{{p`?n%dkzy3kShl2ybLT?~H+eB!22Q{M%CbOgSpiLyY4;NmZ7>N;@`e+!gTl{0_P9{4aghEBk5b!jU14e}g5UupK@dd8;HN+*Iu1Kx zn(9Wo;UUivPtkDBLEQIsEfoN zzQO5GW#|xmBd9=!;cIdn$|v^lw?HF00uLMHP(idCegLdTN8#H!e&;rH7~Tw`Vh=wB z9zn<9!(b0O0Y9AQPCrB5(<0RsY zj>1=*>`)8Pet7jnhiXO#;n%@>bOJ7&MBLCm_&#tKItq_F#i2H#J@AOnIaCkY4POgl z=n(uE*pH6E8)gtsbQu2KOow^{orJGA%b|{;{qQQUgNZP4fIm8qIHOgOLrnxT&>q+a zylCMkK@mCzUvL5GLKnmD&2y;b=pl)qqylllJuvbsahk|MXVM z9UX_izkxc0j==N3N<7g%c*@twL$nuu{5Il-j={Hllk!D}VeNaA>D%NRd{cxnMTg-J zH#^j9wA$iOgSJw};s#!HFKq|ygTDYap#AU%;5Kv;zWxW)Lv#p!8uXy!@L$0mwCZuF zKZE_Ex1&K^^!*NX=|jX5?SuD$++X7te*R(dO*A~_QSuG#f!6~sIt=%M+2|zv#$(h& zbOOF+5B&f-1mE>I`H7CeRZox>v>z_tOIt(x;G01=It)Jnu0zM*S3n4zfIkB3(du7_ z57>bAz`fu$bQ0eBLx&2ZqpDy5cHrE@baf9U$KX0 z?jzsOUifVgMUJ5awPKJc`wNiW(9x3@dhM6rjz(?QzN5qNti zWsHu(uXd4kbON5U#;I1IeXwUOX+#Upyw<7KqrLD0U?VyTC%`te@D0~F)edwBKKXje z1?_>qe1lWP#UB19cpDvo9}AHdbPR4<=Tx7dgYfv9oNDw@{KEGD4>|(B1ZJZXaPE5Q z6WR^W17&C*d>B-S8+g>slq1>$dx0M`rzYLC|6R_(x z$`tK}7lPwxAAA6)_o(x*_n$~VTKIo~@#qNruXi}rRB;3E{TAhmj=>FglMm=1+zEo{ z5WHT@=rH^a=td{uN%wFK?SaqOOj)D7Z~#QnL3lsdgO0;T#f(nEPi`Tu=otLuR@$Rz zxcy$r8Xbb0@1t#^gYcvt()B*~f|r1Nv=4q9j7G=cr-26@hu3T;jpz{k9WVnOfqw*M zi+lKGP=rpvQ|~7q&|dfjP>hbl?gywRXyL_RIobyw1`X&0JZ1-Zh4#Rmpc@^6PuWTS zh&}u|xJ%r_Z-GtdBz)B_+B@10{}M#S4Sd6H>IOOlkBgF5;s#y`;^-iJ4LB%n;D;Y1 z579CB!H39e(ePg$roEumBTn@-kpBVY2s@r6-_UM&E+|6#;HyC~Isxz6OTQ=X|HY|( z5OXRYItt(L6m0|@f`1Mg#XbDNKJo#bgm*nn+QmJ*a6f5B``|x4OWM)uU!5xNIns-E z!=HcyV*eBR@D~_U&>r|*a1@<{zyBij936pgjMD~^#0@_EWy%Tdg`azseheLl%YH>0 zK>OgsACVSx0OhBn7Dx> zAdVL91&7c{IR6v+F>w!n{V!ZYhvEFcQlCG>9&QHt=pcN?-zXQf7j6e0bO`QNE>$2J zeh17(C*jSSOI?JH!mok~bOO$Cx>PmV4X<~(R3kbJ-<{)9-RKDXHn)>Up#q{ysQ}jt+CF z4?zO0hPzZg=oL4jN4V5cvj3(wA>t(TgRb_en(LAnc2fBoFtQY07q8!jm*vc{C^|Gah0uVP{L1T$6HKm!%vl z`%;ri_dszJ`y*NMEn6M2=biXnm&NZu_sW)U+0tfrC;3=HdhPcgs7^`VSYb_jFu6xlEr;;pT=;`@P|2C4I9xGk+af1t;UOf%@x&8gv z^UClS)Q0D(;gv(YdH&qsVBesaEAB{W>0xENZZ8jsf3`fZ-*X^$dOD}{kF%sx;_{H0 zF00(r<7cIRpfJR3yXjxr*TRD`2D?bt?Pq%hoGIT^z@XFo*;3OJl4~4 zNncu=JS*xo$xQD_q&GbuB~IdB^1~`4E04u&fw4K2KhnPNq4BZzj6AZN2XbeH`S&=z zZrI~#_iMkmy}o8^N7?FrwzeyEZL+;4kv9Xi0kPjQfct^MSvP?DeWGVzeDkxYRmSrsyszia{qGf zU(Ee4;Qq6@|4hOzAdJa`F_AFF5ymL)Z_hbx#VKmV@qAU)J5((^G(^ogkf)0FfD zZsUmCNaB`H+;W+FXfh^TGFDxJ`*U&c#r+w$pNjiaa6caRC*gh=?(?)!M!WJ&Qa;i@ zA3qo4rwBiV_?dy9)A8fM&jkF8!Ouu-w94%9xu3ml{5`YPPA!(PPU3C(8!|ZiJ(xoe zX*B0KV~47--8>s%?l*6-`sA|Fs;p^w z?i&^x8qZ5Ol6rqDaaetdT7CSms_T7IU2*6Qf)Z))HxdusTmu7uBLRq zsy@^B3T62ttzTWp7I(ex9bjyzGy6jOd@a2n&9(J=+4`3MUv|>>{G)xzK6|c_?-EYQ z0QUb;;s2xe9VkBkFYT>9)vCjm*=ifphN)?^&8+?2KJsz?SnBIU>g#8yuM?=RCsSX? zQ(wnXUoY(6cm2EEPayo034c7{k0boCgwI(`+Ia(n{|~sg(wScW2dZN-j|=}-uEp7&chblItj{dAb|_(GYwy{@PEU{3@1>XRggiB2qf3q6z`NCMhstYYY?X1$ za+57Sa&0nh&T=y@FxKp0tm$E_A)Il9Gm>!f31_f2vafHIINQg+Y-995Q5bBWVn;xvdjR(`V~*Nr}r0H+86tI#fy> zDxnU2y?-6j`_C-T`&JvVb9y=IelPFePs_b6f07^e_Xg{-q%VC=DD!R7F(m!@Sie`6 z@jd-s>0wB|Ycrffy+izY!Cc;y5T|oaqFqUzj37^jlPAM)ljZrwGhBJPbD2{}7^C{< z+4SLRdiUMhX^r32PS(zM_8adcPJ)5@-EsM99Ao}TjQPV0Ge>+a+gLMDIG<*}FH0Va z`)qYf>?db&FKPI+d7wOl{@xaUE8W@dBiHmgJ}CS1o?N$&$DfwQx-4-XXg-jw9uDY# zcmFb%cw}>L?+c~hkiO;9^7=@YcuyHloxGAdc?EUupZnimPuIi!?X7nipEhS3o5x(8 zeue&FDD5is%sgY5nz8XG%%PuS4*Fy2;{i29+o+|UF{M20=}T{8_P#FtTKar4T^Eg3 zMLk2*SsU}z=^JvHyAP(F4I<51`XH+=t;>>M*1fD}WpOM0cwPEatXU4({EK^m6^`FD zTlNF7)vsCC2WmU%{iHn)N9HltpU{6EZjDFQJ*0iv`v<)qoZ7!0NIbIDD+#lXv<<}i zyN&ZQpZ&AlSJEqKsx+UQ^mt6~9}nIB%>MS`-+C6Y$3^!utG}NiIn>93zIPr2<+a#n zD`S2B^$*OCBwp*xy!!WWw!T|W+h_ZyO}GE@0QS!eV83(#`!)UTr7i5UwFUj2S>^ze ze|1^f*o9-&g?pH5^f1@h$XsIsbB*pC+N+E9n&nyDY7@c(l}UQL(BqTk*-iYXx66Uz zC-x;-;w^JPd1tJLe}4bG5r12<_>=N4;of6%)fnw&$1rcce`s)sFOOed`pxSkj(Yf~ zWe-1Feh!oly+4@Pzdz9DZ<81oCNeH?W~BD{{`b=3kY$cym4%fid!8D7Ot4=*XUiAy zn_g~K|77pi?B;Yo>Duz2ZkMjD>)Gbz_IudJAiLS_-fq_OZ(9F+&DIB|*GVgmdjB~l zv;VZ;BU@OKr`euwq>fC^Qa96|akAx0dfX&zD}KWA+m-#gRWH)*?eR`86MMd0T+{7ip_9+HzY+mCH;o&(v_vi53 z&+i`lO#3ac6;CPac3WB7(`1D;Y;ex7!aS$>W+bMUztoGuEcHU%R@&U!%R0RrB>(qW z?<{Tlh-p9IxSnPH{F!{ljlAq*wWLS#K<;nN=_DU2ZTTQ^+G5^Y@??wk%MpI14X(@5 zSBblIY3{6iPOo25j|OVP>Fy++CAdwuv%*WyJIl^qZkBzvKG^Oyn;Uz3lJKnG-K_pj z+}PhSi=7}_{H?r~>-w`9&%@Nuq14YoW;t`|#NYqm92ooYmdhmh*R06V>(PZ&CP9HO zM~z;Z!zTP3eeJ5OiIsJ(vZhtmxXSuhSzjr8I%G|!tnrjJpR%S?-<8|3 zO37YoSqq)$bSY1ZOZAlJs05Jp*Rr2l_KnLvZ28WBte=+s*0PUM_D{;*#6%fuyk>Ea zQ&{^>n6hU;_V>sh0omgudz)n6knI1FJp{6r+vjFIGLXGOvfn`Vc|^JAA#ea32VSlh z0og+&dq0+=7XVrRot&ansE+ub&OTM#?g75bTq;!VQp;h5JK0krdrV|MiMmPYd(35h zv#fU>e_oD?pG!J{8y%zVg}?^Fi2zwEE&FBU8wcSK!I5U!gCYAfWWR>&<&b?CvPVPq za>zap*+U_FDrA3&>@AWt)3Rn(*3inHL)kwh`@v%?W+L2heciFFH{~&Ab6@FsmUlN4DMj(5TWZ#nPSJL+;k971afg#0Nj*&RKmwD295)T zy{zw-eT0z`>@i0!!2ewMVsKH8{@siM{Ca@w#gM%jvad_Nl_C4dWpBFdf0upfvL9Xc zyvrVVFIx7n%RYJ8H!u6sWe>cp!I%9SvNuEaVaT2f*_$EzFl0}M7cFb~RfzSD+#^IC zlXd>Gk6rf7%f3tbHb-I(Wj2@VK)#I;E+g+@`DTWE6C=oV`5uORzam*m{AjE4-4EFt zFZ(rRZ>H>}ls%oYXH)iA%AR=Hk0bk7*ZygysV*@HTCjs0a@2B>)aK6MdAk9 zu$0MS{9q?*=VfiYtd*Cw^Py6%Uji;;20QuRgM}9W`a4O z8U(;v5C$7T1oVI?*avXez5G24y zU~o;2IvIQxoDVJqSAjOL9()tr3myf}fH*h;{s5eQe!l@T!CbHmtORSot>7DA8+aHz z4PF9Az#o9KHb;#Dr-4FH0+xWQKqI&o+ycG=7SLLXQ;0$m+m=CH!9cTt$0e67A!EUf0ybKP5-+(`Wzktz=q!FA2 z=7GiFO3)0x0`36c0}q0|;6?Bj_#+t7gnuv%oDa&uaiDpB?y9B!4~i!cpkh3J_2fWjv4_b124D)RDuT34sHZ@f&0KC z;92kz_$7EBxSFX;U=~;amVp4c7Tf|hf?Z%gcmwnTt%Z6FP6ac;#b6=$0$2ssfSbS_ zU=!E@_JALQw}94~qsD+U!CbH$w1Hc|Ca?oM1zrZd;A4>2MwN>O;LG54unjy44uGG7cfcQjb~WP?m;z>jVsII#1wn8#2!l=F zejrZ{>_}9stXDh*t6Y`GIYUELz8a>6bDE=DjZ`P8QEIdrqsFRnYP>pGO<=H?s3xgX zIO)-&PE(WB6g5>%Q>UxXa&FFab%y$!nxW3*{G_uuqGgsURA;N%>Kt{hI!_g;^Eu<_ zLUob)JVVSSs#wiYC8|`Fskv&Nny(h9a8TBRB}-RMi4&(zErM{-6}P+iSwNgbT#)Wx|@ zYuInFR$Z&Utghq4mFqb{Fr;o&>(otZy}DW5qHa|iI6?7ioS=9cCn(;|35sD(P`r~9 z6z}2$#cy$f;zsoy^<7R-+{6ir_i%z@L~T}E)K;}k-K*|XKTtiKpm;wgDDL0{#a*1B z807@Thd4p;5l&Eij1v_1aDw6!oS?Xu6BK{Q35qfG6jQIK)qeGidX^Iu4{(CwbDW^~ zJSQl=zzK?RPEdSV{Y)L?1jSc5LGchLD89}Kif?d&;$c4Ul2E@=N7P&DZS`yRPrR#o zIYIHaoS=A=6BOU)1jQsLDE^)k6pwL&;vYFd@i<>C`8Q5b{Dcz}|0<_*@Do&+Dz>%UO3It3bnJf+1feUx!QSJk#@dzf!5qq zCkL^fIeTV9bF(T7=%=J{a%zQs>Y19`!O3N{oq>`-N9VkzW)9a=3ygCJOF2ob!Z=2- zx=jon)|G0G8!YMKaKgFW!RDs=rp|sB%3Jzhs0=g*YC8hzvaVWAOG`z7b6)2(e5uR2 zdliSm$(WV$Nnu%Zk%mp26iOS*Ks(%R;F&XDOe zl3m)?(b*wROKUsNHhH$m=a_u1&W(Zk)m5AuQ`^b8Zn_PLXx9ZfQr^l@zKis%k-*vl zD_3@KC|g~v*Ki@`rE&^dK({q4o0~baZ9!8@A+W@N1EnNjPzZp988qYk8pYS^TQI#24VRgbJVE--5PtaF>p zyO|b6mRT|=JzO!Thg#9r7Bs#3IO4gqv7IA~iqdQ{;y=~ak$iW9NWOBl1&0@8D+ zs);5O=oc}=dYL`GRh^t|lpaC7aMEJc&xdJ|N}=Acj0n@_OKD~tjMQvew6_J^Icu!V zGU2%|`{c4|p?f#YDZdK>wGA9$X!=bHMp|v4VVN9nX+ZAGf+M|-H~2l4XcVd&H6Evfm9z@W%#cssjXkVrnbGIGO&`~ z3`Y_|MJms5R>II^^nqe+3=UKiUD{?00f7c{?3NKa?YiC87+Lf?mdjE1 zGUysZQH62IXjOU$hK26TG+P5n1znj8f)av$$uOq{Hm{bZ+_tK)ic{Kj7h+MBY17o) zEJfMW+F-h&g{S3ifayRzQx7Q?uIP2fh_i7tv30>}`4y>JHK(DWij(7-1HPv2CGDkj zX}a6g^-?|SGVQDyL5z%Brd+3ADd}p~2e!U@rOG$uzKXUPkczC|K(41HD$O#zL#VLV z3El7FfRT67airo!qibs5=-9r@uj;DnY_F~FoKMlW>UD&kZ%!+XNuM}X=be%H3z1_smG=2RE3sCIS09Oq;_(~}@}`W$F>hLzEKr>x8ba2#Jp-;7Ca zqT8fqM!HEK8ue?L!>Toe8e@uO(z_S}pn`NT^U?ivNhjNMEV4o~dG{rb`k`S;d^4?3ml$-lot0tXUZyVxL{0Q!fc)n9@C) zHu^A?Zn1Qk3|yv7RbZ7IGnHwgC~8}b$OJm8RyXPWrfr6z`^YkBvCUZeoMlc)B)MJ2 zEp)YrA~gFEz3CVOV=7asjh;W%x0+_F-Bp*#d^%MShS4m5R1YgrNg2vYZAN28k-Ba( znq#<;b!n4;RH7ubltG_LSTnA)E5=kpZ;5&Z($jy%(q&dMR+ly#d991tR%>0ol%ZIH z5iwsE%hE)px;#+lvqn|=Yjc#;ZG*w)wR%Uth{u5@42I)=*0cH3FO_g~e1kCzpRCFKow3(4Gh7jG4A?H-iFR>X3qAkse0WQ-t z$7byB-e!||3ry)Dh_SzWn+*k%c2m8W%s3hYoqo}fR&-M)<7S4jg7Zh4sot56(rmLi zwxXXIL@F7Eb*7`tiwu3K{y~bxXiyz`q~)O~vxw+$jG}2@W*i8vyTjJFk==G4vko4J zJIFC(hAMZ!wLS`)x`LUiueOPiSD&^pZPPEb*Vbj;y4-xam#gJmA{Z-Orje{SvPjI* zby-f)4XNtLMSW(XUu4WN(_=WsoC*|e6>Yhp&CtoO@+Aw}+EyF6RBk-F8v#(uOL3X%Q>pf;bYx_Md4;%1()AXSmPvAz;fpb#uQl52^v7{M6`5`sNeWYuSsLu9l_y3X zeJrPaRv97mS@#9NqXo|%OeB{Cx9@SW(N_ z(v4}?^%$m^tJby}5hMQ?*iv0khgvO9AJw&WWczCUNyOBQu5zWawv~sO)tIEm&<(t| z|Bw0eh2%E?<1hECIjVadzZu-vXV-&W<4pj2>u(Qs;q`rH%U(EQ+V3$rZt~kE|C`C~ zn+^XSlg~AIp~)*uzQ*KROx|MhVen0(Y^E6t8ujr+JwKE>pjCYPA(Gxr8Gn`5Kc$Cf{!IMw25Z_n7>U$xoQP z&*T?OK4kJcCckg;ag!YzjCkjpJl157$pt2RO}@zFc_#ZzUSaY|lY=H-YqFJ3>uu%} z^~A{knPz#Ms3%5EvDcGB{5m8vDC=!+6~9x+Kzy8EUg^K>*6ODkQ?=5rc6lf;AHvlO z{q4#d)XQnM)r~wqG+@d1MDbt28zJK%R!tEzkEUJC0Vb<~#k>o>T&byjwhQ=~p*g_H zm}O!ox8%9GotZUfO^8j^+K$dZOEu>v&*_j5M5%k_N_A8H>e99@o^#d54jD|E7h~bp_hj`U36p7NV9{S$Z^>3~R2+&Sv62kD*Mm*%*f$Vq01plqnUXR;Rp_ z%@aG`?XT_%T8=4@_O;}oTv^uC-pQMwrLAjtho;o`T})$_wl?Z{#V>UA0ey;RO#jsm zS5K3*O;@Y#BF|M@CojiGxp<-8#Q7dBW@R$7QRlc;2D>`z)djAV zG6Pkmu9YeO3tg*dE3MaX)`ttn%;V~L&|#Gprd6}Ns?*hChVo@sOQ5B`CCG_5y5dEo z`iiKQwrc|F22muGI_$c-L*j9ptG%{~A4g8_liqfwpHSOV*mh0)yqzY76| zx5|OYdwO~MP0pWTn7v_x|68T?e_~=-gFIEz9dSoIk%EXfQWPnUEQt6b%On0sEE11! z&Ff;F6@S}ux4E~C-xlfV>52C2>526m=!y3vdU|`3J;z!2l)K%%-Lt)5yLWrh_Tude zw)?g(-|pYuxIK3Nf&1h4AG$wrfA9Ut`;W6cD)#~R1LGg?JW%j}_kp4ZR59OuCHTw&FtmR1>e^=vEH=G|7bt$5plZN6;`X{=3SJ^t?G?&G_~ zGv9oLa!JSdNMc(r3$lDW{5yg>LOa4cB0HixVmsnH5<8MC%yRGa?DXy|-s#)v-x=H) z+8N#%*%{p#+Zo@P*qLP6mV1|Hmv>k3F5fQyuHdfFuJEqNuIR4VuK2FRt|W`P+`B!y zy}OHd`*!sY@ZH{kFY);C;GQwg#A2ePs841%cTV;jK|JC3B E299p@{Qv*} literal 0 HcmV?d00001 diff --git a/src/SDL2/VisualC/external/lib/x64/zlib1.dll b/src/SDL2/VisualC/external/lib/x64/zlib1.dll new file mode 100755 index 0000000000000000000000000000000000000000..3d0f409385c816efb2a11c5369fb6156864e5b71 GIT binary patch literal 133632 zcmdSC3w%`Noi{!wnUDbjCn#WSX$czJOhHVFwwXn@bCNU38JIv25LDDCG-AD>nSoFc zgJ%Zv>|tzL)V14o>sI$&FWpsZ%dK8!f-(eeBvIs274Xt?7*RkC;X42C?|IJ5Bq6x% zw(sY^FCWc3_sj43-Ji>;y{6TX>u@-n_&=3$I5yyy{(1S|um01F?BQcK4R`#0@ay9? zNP*YK&02U%WAUQ9@4Wf$8*eY3f8!l@+!-vs>4(L4hwdo8<&I)?`pn|n?_BW1iNl5s zDY2Wb^En&~Ruwq*o%qd+bZ>_o6E7H=lXITq$CAUb2B{+*jzawJD5MhRP4t(CbHunQ zn&&`-{yicRe;ml+^Kv+fd9tWWLEcE_CzImMaU=#IR+r-_8I0fN97mV{gLW^cc=}&! zj^mkhc!1yHMLCYr0n*hga~v*vhy!FhCI)}l6hub-Qp}l#NOPw}>GiMJQCB~4!HvNi zDGk|4Xwa=dH)hf?@IufrRg7`%;-Zy}{%t$4Yd{^baMjd#yS5sm}R$fvb% z_Agh4azDK7P88%g(Q3EXZ=t=8vP$aif8)QIn*K@gM#3gjSt2?3K{H zM&1K*jw2G2@4pD*eo*whL&P08G}nR4Ubwjt7j3{AkQ?6qJ~bQM6n!jlB}A2^beEJiXRo zn&@9+TQvPsm*)9$$+?;_T8nfBKcj?HCz2K))R<+?2%((>_%Z(Z6Hd;d6ZsSq<31Cv zfKPe1b>eid@c>cI=aUR#(R}Mdk_9A=a@Ne+T4khvdy%a}RjvbrLAEREhDuvZsQil3$H`TxFR4Ro2o3?fH0v&uY7H>8q=L;Vxm06; zl2UURfM7m6MsfrUq#KlOAf1<2sQgTYwfk9@yuMwDTZIaz5n_`-Kso$80!WgV%<@HI zO4OSQ7HQF0Ig(%BEGhE3s+1I0q;|ijD|Aqeu9TsmtUPuYN{Y(1Zn~>Ezgd+l<45<$ z56HK4QnKRiP~!UveS^2EEOzZ?Wo6IPqmasr%BxObCjO}Y3?;2J=_kN;x2p2GugUAK z$8Q zO5Akn`(-Sq8m$D)#w0Di*XfrwgLxHAjn2v)2vOKpWdq@ca&&Khc(01dL;$wDaHKq3J8^0a0J+8Gt>+M zR+uszo1FNA2F#fkK+)-uSRy!vqTvcuNNqR)T#$W;kx9?sPj>t? z`1Gi&`-~b>69eBwsP-3({`+F|u5@>qLI3Nx^q{{+gMRb-0}VPmmcVZ#V^Ro_)ua8T?T;HS-em(B& zFhhr{*~s%DO`QIfC#e0<>!^rY=ZjkB_*wgz6~5NHLZ_%;cY_KYXIALbL#NUmlY(E1 z>BLLo6EAKR>SoCw~8AwYk^U`F`L+cAZaezvutRkZH%W2$2O1?Twn zHjMu`AOCixdvmYWJI-hwP5anRIpPB*u$|?Hw3ROtv_a2oYc`zKH?(Np`C-YiIgP(u zcPH7r8L}B`bhINlp}Q?N`29e1*dbkVB=acdhPaeyg@)R2Jv(9)jPh&g5&+`J&c{#-y`cWo95}jgi$m`;9 zt4J}zD;)(6NBq-5Ws;M5<#pZ4q)MkUDZG&kM*KcYhMBzX3wfQ%;&HPGyp$zS?Fp(T zuWLuOji}<{MMV|%msKhF>#Jap7|>tU%gDd73Xq`~^XVC&8jAx6X9vN_{#969DC?WARen9FwfbL!A1uiJypd52Y#*8H5- z$nQB4ia{YnBl_N4uG9R=7PaWV+r045vHZops7xVla?*dqw4#>&U=6MgzPVB%w4ELh?! z@17RD{OgM60CbPVgO%v-1_ATkr>8`p|9TEWwevevV_u1~MqYQ@c`4O+_LtNoTVCR- zlGj~+o)3CY{6LO6nf)H=0prGcln6(>S(Av9}5%2#n9)DG=hRw@REVhBu^lnTET z`h#CjV5#D;^)Vh&= zcv-g9dIfb@5BRU@Ii$!nu#I0XO1le`>y;ZetL%Lrd)xXIp*t-=auxr<5b~|2UIQ9r z{is(g&mw(2UD9by>lMqjyuD&M)^`zW=#OujaTm~yu)GV8o0n)#?DaTFcvOqXmV2W3-Q* zQrI*XyfJ<$9$@X}l>nKa#r;Ngso|Z#4cCiMlRKO)MW9xi=#y3y2kC^UwhO}|2@*9_fz|xt&M+hZ*jM= z_{uFjzC*4#lJ4=4*?yDcka&N|`&D+#$39ctmURWH_u}XM_;&?-89#rO++VM<2TEEn zFQT1dpf<;O_$zH3S=9}sw^vCsX4*&%p_T*FOTBPv07#r;%v{v9A1hp6zWu_g#!BIdjmBrm17ZdyU#N}0k;KDR?>Yr0k0?CH)#b}44K^?CX zI_PF@z%Y7{0zcQ$ZGh}HU^cMaIRoh?(uuV*UPozhj)2mI5#=}NVQ7lj4QPM`mjbFU z$215rihc6>SS5-$sK_($+Dql#hJFYQsm3p8AT|upsz;}hc;yGS_}shI$-j74F>($(OC8a7nP7_r23u;Z+tC4OwTndyhbRsXHs(W)J293BWUz@*O%bi&VWt&W! z4?ib3O%n6bj1{GfSJ2oob0Zj`QB!K%QRI0=t}%%t-iWD#fvASJh}4kC^IWsA3OKOA zLHV+vG52(+V|XPO-v1fsfMcydGXfsi80+-CQi) zF~)sIk^9b4ITE4~8#RR*t0}e?B4QKm2CM~H8##(x9n+uZ19vi=Bv`OXED-nBMB0OM zv&a#P#QI~#HY~qpOip9Qk_=`XHh=vYFazS?&NOC(eoSJeuBbc)5Iq(T27TsH$;4aL%(W88NZx$gkD zxISW316gE=;zPsqa7C;N)b4#!rqE5JOMwK!?6-8jK!`p zlamBK5PX`7NaHw)^)a~8AfRG2s_uC7AyQgA9kTuqaTkLyP(LQgt3E^^w^!)|M@}Sy zIKV3+?Tlvz^Hfj#?%$&&TWAu+V^JAzsc8^v>qYa20MfJ2{3{31dky%>9Yu=g6%}Mp zno#&3Ilu&3`q-zn?2tKm9>IAr;Jl<*1zxH^OqFBi2wqrVW@g%v!AQl9nU1Y8dpk;j zZ!P2BA#&*X62!*`9BG#$gHXX2`7pRm(N8)P9D!-tP}vAVoN*ckF*lCRo^2~0b#GJH zcDO;>36(o~O*r-GSyB0|PtaIzRF)${(oAkH@Y#nglLup#N~4E^MPXa}0rOGb_J9nu ziQ4WD%+M%;$)X}K=*UQ{x%FrKX=qIoy$#)WuNfG+p|&*5CpQT6vB}bKh2$Ux%GN$YfAux^8yq`%EvW*H z=Ruu;7Noe_xjv(iLh}}QI#e9ab-8wM394hm;=XU=*Op>}>*@!f*{mgb2+EaCHHuCwwOsX9MJPuN$2 z?l3H?wD?bLkaJj+~>V?Y!Q=$cal}&|8G__t{Ursj4(gr3$ zyT`Ugq*L@3dbB30UXb#6K27MY=!*VjVV_p}BSV2l14|BDdHFW*H(*>SL{zPDTZt{B z0@%_!VPXn~uha(v2)t|yc-bKz5#3b)7qDD4=0bn{x(KTTEH4K23gzCDzE+#vIHUtq{>c6aC=~fz$XC%jxqA;4%C7MN>JeH1+5b) zF;E6=?Fn-gDhsXM|3HGyMV+fD5>^}3nrkn#3c*CSaO4+IJ~)fcY`1e40M}>i z`f*9D7+?l1jw2P?vKz9lK?AlwrXg;T`g74susNbD`>H>42vS_lJPY%(mshjSzPw}p zJn-^{&jqLU!w`fmJGhhb%2GDXf+5DfUUhk}*Cvu)^mKK{MD7Eb|+_ zLO=5rTW=%6=gYQ{MC$$oTgW|mLOEM9T>m3EY^2~Uc>02O8l1Mo;#v+&y??hwU)AkW z03p-uZ3Gbx&R$rZis7>W{aF;lRUh>eC~}0h&Pn1e zB<1iR$W{>n#d7{`HfG6tbd)7 zs^RFIsIog;0roAJt`k}b`xgTHZMr9S7iS|}?;@L5$bf*c3~u1YJcKF8aBcE74tXy^6p^TYZWjnQkwGP|PRXv@dEt(-( z61K9?f5CMf7M<@9_$|zvtZJOlA3*^slqIJuvPf<43rrBrv9+W@YHT8_cClp>IQQ#o zxsCM0jG+%kFytBOByzpI2whG?)!-;Ay6*fEGqmxq5^dUwv z`)NmavT8UFb5Q#`C=`mN>#zMVl}f(Y$|sfF24oQv?>nD6fTNlDa3_SA&sCJJFQxfR zm z#%7e2$2NbynP+6yn@UX73>U-S`R=uGAh;NqTa0b+9L=+eH0ryrS6+ZTbSTdQ3vgV~>o6XoE>xCO*- z=Y4tF`)pU&Ue+P)2Gud1JI?Id+c0=lAqoP0&351|%A9h)ABv};W*?m7=M|El2%vn# z{o9z|`1JfPV66mxIN?fF)=W#HvKGDstzro_3;gb7@2b%&^P`nNz+slSIS9U@Tvdum z+c8r)+>QDHK)RM9P=OpiLzw`N4w(5C#K^Z3ET;JR?MFNGeS;KzsV2+e`;Z62A`cK% z;gvV8E~_Q!@Enr;`m#ch2#rWFrWWb(k+nuuF)hXD^m=2XU4o-kX>Lk6LPwB|+Bi;- zS^vKIKI7WURqR+mfmUQ6EEpO=WCidC!6pP75oFt;K*SH=@IwJ6I9!#s^Eu)e1pM=g zzL7Kl%t7CGQjZU@zK0rmY-k!EHlBmr^bt?YN5pA2-gwJ5Je8pl&P&!qZ+cgs*s-zP@_{MoDYDRRtgt-p-}~E zduE{;^}?@ORoYSj|9+{wzB&Lwh15!(3Mq|6bg6K;Be!=BQpj&i9^=(}&{toN@k4+I zAJU3EFrcal#6M%e%LiiCn^@rte$n{DDlQypXJNg?Bz8E-SwuyeaR)lF%nQ(o zYWxs0DpEarRk?aEDXx*cJYkU?#*zSb&}eKhg_{S7oc~1YhW-qi;(&RVuP6@2#*uHc zYaE0+_de`79EbWt+*V1=a=4;(r*Q;SUbP3C2dquse+s%*!lcyHZSi)n$CIH_uj1oh#?!r>HQURmxa>zBbyiLCEa@-d& zv?9;c3h-HA7T5~7gdBMfMw!?TttzwrllY7{5A>COjp@6o!|}qe5df}>O&J<>Np{q? z_jb`n<^Vf|oka}nMs8z~f??_SL;IV(4XzJ+8C*g|Mj_gp$k<&aUtxC%-;zKizC%O( zKpcQk@Lp&aXD#2GA!i1qzQAQgm1LpK>1*9PXRN)2(tPRC@(kTZo}rAFJMvpFaqbyf#2vrgFjiTc zH5`L#XeIF*`RC&_KFHw(;A&vz!Fljha4e@;?Rtw6b3-+0-LU+it>ag+30yIhedN)6 zl)wd^75e5^>-%YjSB~Kh!0^5ej3c1tU{E##vX%qegeRGNA0J^8-(0Jbm3jyK^tZ!L z-vB>-1N`(qEDgcp^I<#02hF~S+DV|Dz-I0}L!Mj%wevC0-FxLqm45s@NMCy`@lo8i42S_LR3F5mYLAhR?rPJ=&f z09p)jF`J>oHK1NSJP{vqGDmL-v``c(`j^{n&mG58AgM*%F-V{Tw>}#|B9VrAA zKNK{8g>PRhhd`z6i&}VtGW!=kH(ZDz!w;?icMvv@c{g02>R1??l2Z`MA{kC{#WeU!W80L z>4Fy!-SaJU;ss&|XsB2m2AkCd;%;eTk=2cn3LCg$d2Xl*rRrA5Ra{~WBELG4Pxklj(HU# zA#`r7XJ_MZYF9!u*h&g^t$VYwfx7p(cf$P+;I+^Su5yA@L>RJNtdkP;p0XE8*@PMy z&+y1I88^;IfDvJhota}2@;cv{dj-6=EPOM|DV9=xpiOnh)LhQu(@U9N-|$4PT!lF{ z@tw!aPL%D;UDie9Zts)TW)2zzpf=WZ5cSu9Ax{H8j$`9GPCIR{$dOfOkA#|+bEt1Y zs9CGAXHMtU;GoT&Sx8P7_f~V-TU^7iehVBC_CeqLiFUpNxMb%WH{t*o9G)jXr$({! zsP8=$iGlA4W1tw_SpV?__0^0);9?o^589M(t7Y2*ILT3JR{Q`wgp9sg=_)XiIdCoC z0naj&LcR}5*N*(yq4(1cJ()K|vswOnEzM1DBDc&m(D9l4wd}v+uMeYzv-8&iU`3k0 zehOWCApZJ|K6=hLs3*PoYk!`n{o`4A=K3tZOFl*V&RO`G4lS31oyN}j+0Am~wIc#H zg7JmuDBR?#B6;;pj7N#i;5r|qEQ1wuRRBt#i_4U$g;4yErm;2{H?U1$h;WaT(ka*} zTyVAmZT$#6^u>rVC`6~Rb^~u|yy=o<lPuS{!1rbd^OjYWv6z?-c}xP+E4}4w-s8 z)*P}!jw}V;s;yTqdw95+bBK1h${C4^-Bf!DqUYV=n8+%z_W(*FaG+ z{pHmsfaKN`$TYs+pz&=EF4G>roVGcFC6M)@Vj548Pr9vyMu&l2$c2WG_||A1>2u8F zR#YC~m3)O>Bdzh6c$z47y*40G$dMX! zM5Qx`IQ|eIem9!Ro>#DqX0HE~f(wz=Oq$L>SlOqnynfoWbm5tWqQ1Ot+VuWu#;P^?35buRk*!sN)IIX8dAlLeh2n@1*E&_R0D*}Di2j~ll z)EB}3hY9470G5!z;wDNOOZ4M|gXvA=6%_*^2?jCL7Db$2J)0!E1_sWP;6C7UkK+gN zhSn8u9VXkd{75`C08(q$<{!Z+MF{_l6O?w}_0zDgNt@J959R`C$zn(or@ZZ$n~XqxT_3jX!Bjc8&$(!K!>5)Lkm4Sf|s)A_~u6ZW2Yvame*gE*@zgO z-iWx$DK;UHiS3BT&$|`7 z2D%DhvjRSE_yZA9j72W}^mjr{ext6Cb}xp4M!l(-6<}VaNLx5STKxcNb^X(*nE-1; zOYr@jzDr9~m7+TbTn$mxdn&VOhGp^vb^Wwo4*wWq)=$I7OnxW*G5P8SZ$G(o1Be_(=VK+U=v_5_TS5vMdt1X%*GCY-UbBk3 z7PPB;5u{=BKa|UnF$my5>EpviK?ASZKCy- z)dTSJw2Y;sl&s)z2-1G?7T5D;l>oC{^6Cqa3Dk7Sks^emb9(gS`SR)l-pXKkbuQ07 z1mt}l(wPOC>6bu>t2M^I#8g5N$sd56Ne z0-dg(=4ET?m^xMG0Zm_4M-3K63m&ARY-$nq8))MCvU&j8ErJUX{3Znnmq#JMI&cf) zO7;|yY=@QP`1YGWB1pKV+CTHWChtLKLO0_)eKV*0z6SY zhQ^SnE}$PRQC&>GiE6QJERY&wEf(7mEvJwvM@~`^;nPn0hCh5!FmkpFJ}hKA%%8=m zhwI@D=^S{c6=^QcQ~GCx%K99BD7=+#en5T4^lATF zj*!P84TPV(0{yZZ30Z!2^nDx=;K#uQzfxX=|G@DQ{jtu45D@geCPUwNLS!&jOk-D7 zSod?mn`iwT@r2?<6{IU=)~!fS^FuhIHXBqn*o~HI`EAxCJL!%#~_>gi1qi9D^ z#|XpE@BnE2&y;yKs?M>gI!joa9L*@t$`alQoXBn3PIxu!fjJUhmGTqbK!W1L@3n=*!YDVXj{GbRDU;ZZw{`Hh>qDwjQXZ-C)$zS_pe@fo^JoP}7 zyyvWxJcd(p_r<*_xwYZ{e@doP>YL9X+Cor7nrL^&K_Wwu!1aljxH>bPY((2%JZdS9 z@^gCpHc~-vS5v$40qC<5Caj>!*%|trO7;5CXRr5y_)9@@ zcoX3j(c!ZQ1dN-Y?7;o?7^Tvy5b&~8y1*u2u~lMQK!L$ni48PdY%nT|@mq{vSZO%W zVN`-qfQ*eP@L|{DX4w=ke!T&sQVTGjrWse(2{Ej(*>(Ly@f>uAoBP;yKwF6b`h`{-eY~^CP5?iLJ5i z{#OdugWT!;`|W5>z`&t18+ zXgbuCV4hX`UG(O!nc5Aa3-F9OAhnmm!P}ExxS5C0bBDY*lFV< z*dosLCA{3IfE;ubV@e6{LRx}^w@CcVLc^(qcdm$e=|`1c%=Lw1K@G3JMMsUr_>!Y= zunk&r^(=bkAe~=}eTVIr4_^EMGRG^;J+({rVGAQRWxn%1Xp*VD5QfEOAq@uys$BTZ z9;DiwZs!FMj02s8p5r@@!MCoUMUum}5JdrY$G(l~wABye{|^)<*j5(@e+$Uni^G2! zJv9~w=*;f}eXwW1<^IZJe5u{~DY%MO?x*wEE8C>iWP89_bP>h#21jss=Ge1K(VK6( zvSFRwVJkY(d*BWpBZnsgG{#j$WOIjmFwT|7#o#E+-)IDRPFt9$u16dr1Cr@07Mu*` znO~=oCaO84HN3A@y?{z2std(W6a5JD4v&H~v?i*H2n^P*IgNNxu!zQG{UjTwj;(t$ z@ws4~4(rZroY%i06Zi7?^h|s%^dpB&gVg?9C&e$Z^NngR6pP4gL~(ADS8YZ(qfe&C z;{rUedBpueENG4o>ndk74ToOyU%G{fD+rVz3BM+JM|Vzc)r z!DRGPxEOF;4j)I@z-x+a&gjb2>C>l=c8uG4Q8WGpEu2ua3ZH0h29H*u?M%thWVOQ) z)AZfBn)|pGy@tz$UyZW?8Yj^phpz{l0#NI(rMD^|Q+JzR$5yY35pdyvM*+BWz%kmB z8EHVmfyXoAg5(2=asi=k$2qDNkgkK>F@~A&NI@ddGX{2Ba`;|EzEUK(XplAu4JZ$+ zX9ddzmju5>a}Mizr11U7YQgX63Z@J!}o);KBL;ZOtZR zaSuH7!_=sTBw}MoJa!{4Ts2w!IKvN$2h`Z!{ifZ^-$TOT5vXtAHuk_IK6hY^4FtY2 zAZ@h?{CXM=B-~Z_?Qa}}0TohRgc6uh-X0g!-ELF&8UT;4D*#?-^ z%#Xi8{lx7B4X&a4OZ+`0Ea=}Z_)?=ftt`rsC6LzShGPtAO^(7}Nwza+kpI2p>uW!y z>31bC%BDxI&(UMCz3KDDOkB|SjBFg^a#%_xF6g&B6BqP5E*t0cJHn3Rr3ixj+hc%~ zze5^`&C8$YxCoIn1z*bxH`97zynK8|kkm`Ri=zJ7$cWy^7?_Nn<2ilwJ3&m{xLjrv z6WsYIWj$o`8&aJoCl2Q3HqPTU?fC@18|iMs9go6DcW?;OP~O2B=Sd_0#HB6A_{PHC zH9~Lb%Tx)D2|1jD(vfaFGszyK35^i?d>F!FC*mj~?EpWNTecylWnn$(YiU?NOU0^+ z1e|#%p-}?@tKSNY)@cP?=CkMHfFllf+lycibAWY_BOjov@^<4~sD>>sAdKhX*8Bm# z?j7_{1Ur|tNn15(rVFkf{w{Zxe`7x3-vD9zua5wa*TJ?+hvb$oP=Xy9e=hJzm`G*- zg9And-{gZQ6AZ}F7ZK_yk?{XqKA}8wFGPQOHsp{^;}l0G=@1QWK6P}+eFV>pR|8QR zT4`sFWVf9^s{|5N-qBLC$7 zF8&l?aDOfSJTm(4k3WQ;7iIYKNYzm4%VWk29NdWoa}8ylw0$!tyx>QI6Q5DupDy1% zVEJDBIyfcMj|YU5mPV$8X%Q&K+l(1|@LB#izN#r5YbJUUgNgCMh>X7e@V}tHpN{%F z_6IEr5FDKLK<0eD*-+|w$t%jO%*?x-jtS&JO0gV$>4KB+6ozq2Jb0mI%vgv>1QC?b zaG1TXJlt9y`&`J2-t)UO)2>H=h08MPG0k!A7@5Two88zzOY=KkF?2xu!~`eq&BoAL z=y%ENd(RnvDc)){{0rHR0Ny?A)#J%?vpwpkPXwK~GJUTWNwLNS!8`QRCxf@(wX|aL z>K><(WW#MSKciqYFeumjPYRJ%PHy>y!5LJrBV7>R>EH!t<&ux}>RRq&or)iN4-!6B z3#zT~u@1sPl3qSm&YrEs;GnI5LLYx?ueVQ2=@u({H4wdV5lL;>h~(aH;<9$t0!Tyb zqAhB!7%SczH5$E;sswTPj%O|+yK1V-9EJg+PNGUBS(^}gLZXW6cr2G&UYSQXu%M7H zhcbl%yb2#H7AafIxN8Db_O<8Wvke8`!)^*7Q)Y${1y~WrMWhf7j>dcg0x*wf&w#De zSgMI@#zZy*hu||JXhXpfk@y zz&_A|-gZF`*~EbgNA91X_q_-}r!2Y*)X>`8BpGt#O*DZf;aHeZOJGsS#|g0DFDxpO zXlZ;js)PpDf*hkUKo7aRgP^bcAUIO!CgavpJk;qv7|6Y~EIAnZhm`P~T09QygdJCy z8ITSr?jAESf+*Z^@BYvV2xS6m?y@GV9`>`U7U3~RG=&RvO>+2FbS*6YixINEjz6@R zR8(GfPD>#k`)f)X1ldJ2B{DV0bA2A#7f(J=)-kFD(^Nt#fd}Luhd)GOaz|>^-ai2$ zT;>%tqHQTZ18VOw*8^JC4wNYG#!yfgKofd}_3sGw-hc1={#bc8-q0n`U~ho%G+ABV zNlUeA27E3(Ie6bVOlFVXgQGHeJaAGD!@-A?Q*xNFkWPowA^R})UUB#cz77(zKBVH9 zd@S^gQ6u0#4cW%@0I0vtxD!V??<_0dlXNw-N}E0JF22Z^K8Ed1!+WPWr_hGC9QiKl zC2Ba#r5gbAnlc3&UM{>|w}||9wSXW{W;>eS1Scqm<`d)%T}`u6+;|0Ibu&UL`+mTE z2(|FF8jKPgl0-uGL9u~LCTh6y-LEYATS5H+-n>5#`pe3XY?~-I9OdwY8kTtESqfo% ztr#E5c7yTIsh(q?ynyVBnfvHK1^N)`eYRbkP$R@4pg)N*3{)gFYQt`hC!=Hxl-l5! za?FgP&E)I7^ga7Lh8DeR5qK4LAK|YGuE5#{XG3C_tH#%%$c4^_MGzp1;62rthJ|ep zy=~hg8LQvk4kN)S~Kzx9U#@<#Le6XKlsWJxQK19+6;wL~;I-zz1 zzZ;P5ki!YeuByi}iT&nDfoS6*@SWt%cn=G}Oa+Jej0SO;glLVNcA9{L*JW3#f3_wf#f@>}zmoy!R5ICs`?K@s+14mtW5#93GV3uAL5ANqO;bG|-|I&o z>`-|(>@;k~lc7dsaaA8hp+M|5ssh07p+;j9J#<1w63yd~0ID3OZyXtb4CDcxfl%Ea z!yle}E>T4Wvcvisa%rUsP_5P4gTJ8O2c`gafCF#n+jP_d;gr>e+&n`><} z3SB8sC{%4o7*a7VPw7gbM8_&{q=F6vvl%XV9ZVRpzl`VHOD?f(#ya#DiLJm>@M_5= zya4RGSa4mMBUE6&@bB5*Ucl$S>o3huaM24-Zeue8tlY8k$J|3AM{)_zD}_X;$et4 zSRP~&p!gXan?G@0G84Q6%{cJfHy*sl5>>gpEfoV+GaA$ACHxbFA2(tp`LIfxuJjza zcba<#f8mOqs{*@J@OK~>mGju;LOav=Rny{EQ#g{Rq$@)#3g>A&}v4Zz7WBaP%Gs4yKTE|5XI_gWyW! zFH?=7wd~8}d>h`12PZ|}z)Qw1x#r7FI6C5BNB#7Y^*-~bE>baLetgnpC=~L5`(u5J z#E#<8JzikHS&RZ`PLr0o{L(4#F~xn@{iVu=2ESDc)-sOd&aVlOHQ?IB{l1IRl=x3J zY1Vqa41QDD;v;?YP!eyHcsYFN^ha8LWcOj|%XXZZWtW`biFGWdb<71NUDSlU=OL@B{Rq@594Gbz2+5^!DlpP8+ofd<3vuTWvf_aiq`>*60cEk-{lzfrK z)7##fl(zDQ7*$@5x0}J={3=c9plaZ`=2++>^GV$KO1{@;{M^|W25cRU^m$73iY*S3 zRlzIMtOd8AXTUq!8Jbew4VTdg49hD&xP>1?Gj)D5Vrp?TxbB4c5H_g5nayteq7+M* zv}MK76jDv4=lwaZf}ceFi_9fI0-ccte?65a4SqHP$)Dr=jBU^1_{#*0g`FaUtCUKm zjj%E~OsD2CV*q#rTZU&n(7Hyt7z`NnZkat$HF)P(0W7qP)$*;wX#qgE1T!+ZGff}8zV8U<2$Z2W z6!tdP+J6cbr5X)hl2nl|F-E*`phd4=gu`}-KncPjT6DRp88KrS&e&DERCa)H?b{m( z*Px?g|HLtQS&MFPv8kV z2G^)jjR{v3CLhVj)4mzhCw&fY7uq(T1%B{eA4enT6)zi3EduJkC;C{1KHk9qUNEMO zfsJH7>7-Bm$t`%J!r|$WBb_vjhe%Ba^*n6PEBPx_UW6LhhiEdF*j4_6I;d`vBcu-{ zs=0p?A{nw7Ym(7Sxc$pJGtDb_&8E9NX6Sa~Me4*Fg_US%#Y)Y<6?|KHKdd~D)Regx z7nb_BCiuTOUMM#Tds&XqCTo&$fa(PIpF9TGh# zMDh9PsW-&-9PCs5Z1U_am2Kf}Gujslo?i~7AU(DWqbL4rEL{M6-wT4H2N7G|$4rBr zphIHahY*2oUav)OUBn+Y{Q?QbvQp3K#@h7!j9QS-%rXG#hp;dfY1jvFZ^t)8VxFTo zQkjEi{N$R`xLSgzu4|<)%vuTGT)4+2Eh}`N4pph_Giw3nY%FWSAZ9_rvBoAKQh?20 zWaa?502i3mD8Y_elko$7%VvWoZcjdB^AAG1odPB0@MzvvsdY1cd*$2uc<9&GmuM3! zvKp2;S5D0+o@V5q4o%O;oGO$Oya&Sj;~FboW`xVB9p$Fk6B zx<0u!RE9@E=s2R!p<+&EMS6TqDClz^mBZ^1z@v>uBg9d66COP{y&~7gPD28`L_E|7 zUA@zEJ0L@zrU@Puig?IqXtgdy)!z15`s=vl7J-Dp+v&p8g3zO-mm`}nNGL5>&MF!WuT1P6Vs17Ih>y(nlaxRHQ9Ow_=~ z(YlwuhNtjO2j8F?&^H0>=TC#gU&QxwdVj5{n7ocKb~`loj`<`?V4vNO_wxqBlg{bt z0{-mIPK-Xi{@exG+mm86E`ScjZ?- zg}oQOZpD>SqWs85NVk4WeP`~=aOZD5;NUQB1+IkVM-Fl_1kw{>v+lUCbC%Zf3RH1KhijZqEc(D4Hz$k4cuH3x*yLg2#0#_{L z;v)76%rh>Y%?8|ECT0Amt(^Zt)}{Fyp&@5+?I8#T8?@w{6@dK*(AxI^*ouJwTPH>- zhtENIqPPlC4-eIKFWmxl@^o-(7PeDP0Ja-wc15BdK)VYo!Np$Y`$v7?i;ogLR?>{M z7jO=+FpmY;8vc0>SaAWi0Ix@cD|$ix8#d%^4njswul*wd|37hw7rcr4r$V=KKZt<* za=0!4sa}xZ2P!)Q@;~1K$R}3(w~%i&lQ3Th^bc^zw`TD<04WQ|1Gu+l0NYvZtxcbK+hY9w9t=T3yDj1KDE73Ddj2&^#h=Hh7);{h%AA>G{K@+cB*Z!A_hd z2bu2#AOE5U)9Q7fTV?yvhWQ|%Zd5OTFtP~{3L16qFn=MMl_PYDq#+}3(#87VUvXN- zzU?FWF3VyW2`}Y&z$_J-qZ&6Z;5G}ndOR~`1+PsLHLibGfy`sU@gO*;Or!a&9$JDg zVSN(Ix4!Ztm!&EiJs(L{*;H50lfFT5QIUN>+U_Mvpc&U<~A%!1vG1e@7M< z-Q0TW%^%LxPeRKw^ht+C1Xw3$=@X)wbdmnh{jMPVU@bxSJE9`zjIVLh?4^s8VKC4| zIQ*bKa7!(%UzkZ7Q}`o*B<~hj?{iue_69iw%$s9;#uerpFq^Fd$j*F`GVLFMNKWBl zT!5QzF^l^yO0x%7PFDho`tp+cx%e6pDJV}M&M)*ofk&b47d{HT@gJYzrBH_IhE#i!J8U18;Q8Xj( zmh0hJ=yl%@AKapTLciqtg)!=C%EzmfNdx%D`B5^?uQMe#_4^*;%1_Ah#iab?jD3LK zfP`l(T(Xz{t|>9`D~C7I1utVMj?01`f6F6M`ci%(AJ@LH0q4YD{P4kY*Nj?%?art3 zfnZm|O+Blm30ry)XL#Qpa-^Mrn^spsY5$=DE2I)g>P3*85ZE)#HdU0!ATP*~qm*uOk8*#Z62;c+uh-#-?gXT>!jFf@8; z$BZ9D@(?yBsPC28^d>##TzQ;)E!c&WS1}rXH1EDibcWnlyx|)deIlR!+Vfde2IRBH zU&}tzuz}gc*UcJAZ5-A=?$P(JsH2#S(FNV158d z;lKbvh22;*>fp-06^hPU;R(CKjlC*x2o|3SK~-M=QQRzqB!*D*yex-*NtL2`8gxSf zj(`gXkwwSQptb=R01DZx*rYs9VK=z&on^w??Dj0aCz|F5s!`)4Z&~C^fKET1v*aS0 z%O2dKwUL33%-%W4;sP@}4(fX)R^wzQzJ-hZO*yP!Uicsfv?tW&yKFx|N+KU`bUHTB zpZLKX{nK2l0Yl5^zvzDgELV)!=Q$*=rk7d8dSW;ZZnG!yM}0lcP2hvJ*4ZD83Jm(sPDdWNg=6}C&a zq;Xat>ij2It@wx!J$Fb?!=vzK1yftKA7~BE{$KRHTwHlP9$<%+)LUehJC?FV%t@B534Do zPw#l~_B1|if;Y%f)<9X~I+t;$*I1>er!`xAwrk#RmiOal_3asAdBNyAE1$h_^Sfpw&^mb&H4A}pxad!pdGKj;;$9VCh*U#ktDE^x&0H;7vyeVt zTS}i^#1&wECW-#ko8Op6iv-iog&NVk3obd6%>DzSFKbT%`zn0yLz=Osi7M<} zm7NF}&vPIprvo0aS(mGxq>nxj@DUyn-$T7Mfi`@e5AXnG5+7ew+y~uB?6cQOADguY z(W@2cj2-%K8Zs%SW-cZtd2%2pzLGs`Pe(83=pi7GlYMQ_}AH)*FLZ=oD=fl z^DoqC4?Y`4of7Nxqf@_B867ju^SQk0aSRyTt1mt&skaG8A8@8UXKwOm4Xv1mynY+D z_`BdUny&G;qJM|Fz7}kpd?pEI?#D*u2IA`0H878#k*t}(HGoj%M0fT0Gl?#a0``2) zMh}g^XX^z}nZn-ZOD3QqG%j0vDnDqMFjo8Gh|uE%5#|%pH*r!8V|)-Z>|-m01y0K! zw%NKG*_rjm$9UZzt89+ebr36C94zeBpS2u)A=N8~_n|59lj{bU+8h+h(oZ745Jfl8 zAL}*ri%R|pIL%kHa4?b*HMc=lK&BG#aQX_YEbmFQiD10|=)=s?u6z~^%)HW=OYTVn0G*osk9LqhRjSQ2MBh#SXLTqW) z7_^{3o5Q6=!gZ{D9Zqy$;T6wedDSNvZWd9~GFM^v;M6ZUC)AAFAa>pG&lC9rUvc9Q z$|rCa=lr;=?b@$MZ>xm=KSN_c#kV!SS;u8)5KqlduY=vL=qGSBVl%im1xLu??*nXV z^xk~cbNcRymcj*AzaD_^IT>*-y@HamUW9_^qYL{F;6c0 zY6?vs_f4R-@o{4k$%lL67~9Uab+>`5J&%>Cj22wLI{_cq+O?m>(G`i|aR<5%;L%7w z`a~~vm~0^?>&*cd9I3MHw6G7^j14?Z}-(_ePlUX+~)#JS`&@)Xe`2bubM9(|A4tBSJXrZ$Z(Y}lq1^VmSzkwAE)itOZ zbD9XT!SvHBgA<<_U2*}wgKl$YTYvINZCwBKC@el>Htbz=25oINblDEb z0|hhyQ7{cc086AvfaY8<~B~{D106azCFRQF3fEC#m?j&{)Tng%KoW*vg0hPSS)`!kQ@0{El z$6;{0`z{?v$41CsPV_G@A~yj)&|4OEYHm${q!0#S+>B3(sh*p$wYFc8D--TE72gKc z4Gb0weC(n#7dU=M@KLZ(V5i`nP>bIMWZ1E;gBu|yQto5yKzT}fg8-uMzgKS?8b6qy zhK#h0mKsaE`W~?C41FrB9iR8{Y{LgRpXa~|9VFOUpHah5{n>5c+QE`}X?X(yiZRRK zA3>2cY6AEeAkHzanu-|P?t?BR9a7v~#vD!Ybm7aIyH)pYpZk4?Bbbtfe$Nhn^r}L6 zZCvwgm)EwrI`G8=)Wl+rmRDVaP%S&+Ke}7NTKPO(KDoLJo7-}DB66^94*IM*KD7?S zx(fUlIMXr+FCvR?-yk0v3BIL?%p7Fq_*$wZU$hE`CYAz|DLV(*xyZ(404*2UImpH- z=WFcjTx2_u?L@W{*}2HZY3RvzwiDTT$j(D{9c$j(DH zF0`M*ic;T$ke!e0d}QY%dl0gZ$>I0x?0jUqkPU-Hb0Iq)**)TH4ApiadoZ#GBYQBi zUC4&h?Gd~7U}O(L_7G$bLH1x|tRtaOlr@ut34$Wu+TlZEtM$oFCqa; z+v9Ahge!oF1T1DxUQ4AjxE%GdbUlMwD)WMOB7%kL$#1C~6ub!$EK858r7}M_8xbr* z&)}9yS5QL)AnzH{QaLy{84&=uXJ||1kl;i_0Med9t{r1xlr-hcw!3{eQY(rx? z_go1ygf;HNq1pzN$MpiJ?kGYeV>Lk+q5xhxuZ^ms;WRjsp??4y0!qUf^foErX=|C1 z3Vp)w4wBsuC8!R9Zyqdj1qTbDx8#uCQkJaB)aU%3Gk0+OS`Z~YnZ!9h7$5jN$~TSz z%X}xx&qJ?T3iLU4%zaugZ*t0-SeWRHl>RBcPrv^8*~GTl0dmmn&(+&%0jl^Kg_o=!Hg%qy`>e>I0fQ^a?HdKn<-4 zHEeegt+`F~u$1=zvkNGKUOtE8wErA((F;%p_Ehilkr?I-c%?goW8rznscC$6j-2gy zpw+%CWV_A97XXu=lheP?`Jk1bY~^FZCy|%pKGz#sv?+yS)js29JiB&hy>8}dQV$K% zg$@b>^nGguUZ?2`11#xoyO$ooy&l$_@wcfcU zKCcU->u!8viC0(@z?)>!4yxOPWW3+^`;unB2)^>+OD+V5t^u{r$$|brud0!5f@jXa z*w$hFCGzF*oME0iN2Qxjx3Mt%ttQK6Kw_qsmDNfV(K#uRc7 zjD*oJg&dtZ^7<=Db#I3W?|zM*eA%e9%$EH6D^g(cZ6$?`L$%4vOI-4O4In9K6Y&GN ztRuc3@3_2)fw?<+*#sC#jih-{+Rq?feUcv+O5|0g7zLrCOLO<=u{;e#Sg6paT6VK612^t)G?aWbCMlT(~ z#|7`JHa<{N25fi)Gly}r>KY7*77(9_^8kYz;gS8xPHb`Ej39h}u;(#@2^yI_w5#@e zejq`P97iqeKO=p`X^!A?blIg` zDCM$CL7$urg|QC$WSb~8*e*2~r3TxjpjOU?-dG2<@|U925WCb6lp11}f_6C@>SG>i6!!|YPSP->W6 z3aaO9=$Cb$%VDP|HQX*GqttM_6tvLUP&ez2;KO=wRS_akwyf!KXri-aWF1z=3+%)G z= zM-CsM0Q5()b%5(|(r_;>C6RptgjS&UzGjyqn+DjcK=a*bCy^ZkR8^cnc{_=07vQCm zCx_SCNo21836()Wc{_=06kwc^AH0itBbx-MrMQAOQIu>D;E*ynIFq7ea{yVCAwiX* zWM=>?l%c`PC`z^kmR~6dev6`HPhg#uVZrk#3dihmET}R(h>KBvS!wah#u`q`wb9## zNeDlJAqCi{n)?m#B5NYpeMTPz$1KK&xrNu$`ZdgA5))iXSZ^bS4yKcgs>#a0eHj@D zdFYe2;%l_l72KN+eMO6Y<8`h!U0;kwY17x5f@U)PA^)HI<$s4d?KjBeu+0AO>jBn5 z)0FfBoXKF(z@4y4J{lLko!jCg;i*tc?vgjj0H&QTN^Y(GmsCNoK+soFED)zNxXPy|or)MzAW7&IEHh4o1b+wzk){_SRQhZ7l({ zm*7>;;9s=vEOtmr6`fO>>gNEue; zS-K4Dz?VyzT*~CCGQudNOs@9GLp?A9Umj(+OBc#hWrR&gnLMq5pbV_Qmrt2|%H*pu z!X%_jJ|3d^p$v?`H~Ou8Wy zgLH}+;eF7K8Y4No-g7jTflX3guweziChz4+Sm?XSOC!iX5`96cjQm~_@k<5;7R2t< zI7>)&a20Ko(SoI*5}~J=}md8!cFaT=0{WOb*FO0gwOU zreuYWg2NVA`<$DS9X<-iTHxqU+?1T~QSj3OBOh>6hJ=rTjnqjEjS|b}JsD#8!7C&-G<+1Sv4#dsi46-M1wX7|!3!i-5IzbvSOvi|C02+5 z5HVPR#D<5DGSk-ZV7|ndPRnrlWcf@;4)jLgg;L`}j}fkdEXlKb#r{~}!V}M-fWLgb zs7s_wh4E;IX@5*sVWxFSpyW2RkY*l0+r?K{hmC`@{6o_<{B#(R)r67ChmuvHG}#cm z***o-ccdL5RabeuA|#{dMxI=z&;aSzSbjIqpPQs0d=J?D>L@|JK|yIDSf&?eYUU=1 z3B{R{FQtm3u(Xgc(~C22bCYz1;!IcqVxW730@Fg&OfSx)&P|dSiZh$9ri!D`w2(Q| zi!BPg^K)W7QE%Rm)tNP?V+wm7&sOL=p+Ij zo#K+MfM=cbWDW;Z^3-)it~4geAry$!1J7;b{7bq0l&Fv)Qdke`q%Wih86pLgZ+26J z43Pp>|He%bGDM0ioyu22hDZT7>)kR!ib%-~&Xas0Ma1%g-;|h;B4YW$Ya}M5h}h7e zUt&Uvhz$!~A~7LF#0rAvN=!%*vBKc#5))EHYl?Tx;=Z@Gkl$KKlQ-i@qrvy03Q8GYKJXrNpH! z#HB7*ToS&;^DC5qv-WSK5tZPsn0L(Wa|x^wS;exW(7-*kD=JZt{qqyL#K8TtD=1Nd zz4P~ViGh1(S4^S=`{voY#K3*CD@plwgl6f&q05+#|c95hY+C59$&F_s6baM2Y_j-of_+ z_rEsUF54%DUxd(&ilRI!9?21I>9te#{3PQ34Cgo!#2A!j~p02#|Mf={g zO|KCV1WE38Atxe~Aa%H#URTbMGG*(Iv+3nn5t@QYo=_Mm1-)66EpHtcl|QJ&sri4C zt?g4}@gtRs2CKBg?^&k>n-@qj%Q@it93y!V0JLD^hoU6h6fM|b8Wh>=rf9*&4@K#8 zQ?y{?hob!1P0@mlABys8H$@9JekjVrZi*Ie{4lgdZi*Ig{P3*rx+z-7@xzv`cT=>W z$<1fJXg`1*<9)F<`Imu1Yf{%Z=5%IVwY9H(zgm%cD_iNlU z7JaJo9GZ0k+0L&BFxQxDwbj^;yKtRc%1Nqe?{|}?#R49WT()9wyi9j@gV{Jf1XI)e$cba`!bW^Q&XD|e|3>|n+{F_@ zi}Pq_E!$Tm9P)6fvAh7?L?DmLpRFDd2Iqzn&ez%Ts{%>(>^#ON@?MA$`7!( zPU?P0Bsx8>v*I)Y8J(v4Qy{UVSv_YOL&7^e_LTuE)+DC!os!FK0BEiJsKV}@0iNL~ z)~OZx$16XU-LzQ!Oy?YD`s~idqML=ZWppn72O$*aT=B#Ii?WYOyWgSu`>cGK?C;Ns zsQ!*4ki3x4SusJ!(g)G7vC|wdjQ=--&_i(bBgy;mj6>cI>ki)FUR?;zKw;5{3uay; zw7XhA&qh(t0tg@ZnlWt?r{(Gv2i~6;_%)m*Z46#`$<1SfXxye%^j*zS8CU8%r%aSV z+uzHxZ38k`*}#|XLU;VH&Uo_9d&*v3u&;1eai)6$cV? z`sPn0Ilt=sR85~a{x%?=YKjwo!Y(P{|-4+w;|hscy8%nh-*A;7@;6N^3Yg! zhO&uk0J~?*uL3q9If~W`$ysn|_(;*Bsov;pZ*^?MmrzX?&!2=voH~W~+S9#aX21b4 zwhP`f+PZgmrdJ4EPTlYBtf&A`KuS?{vRs0loX4DyLlC>&oXijH7Q3nkPnwV2;9Z2|5HbdebPjhf?V9i~wrNXc{UFKYQX35;>OBw^Sl%8rBEX)T5kSC-laBm>>BeOrBJ36!g;tVRGTccLKn&mw~wN-&ncG$@ZV9* zU79S^{BNqJESvzureufrW=j!^=UWfpBVlW6d{pa>Q5>%Cuiu%$eJ0+~Zrz!8rUX4* z9z07%6rfCd{wRBH0PR1v#oT!FMXxDPW@*2rcJ&N8*K{wODogl5_k$^;Y*RiM#s?^n zW_ye!-v)5L=oO+~4BZ?4G}CyXj>7~2$`#}o%X6iV*LZNd6>iVtc3TGm(8t_p+TfUS zscCKUQqxJNP^DaIx|7Mr4hrH;fVNP2>sw7oSBWefJhbl1RIi3~4iOspLV+^rYXVg} zbNM18{DE9bTOq;jeU5%Ug!%GCr%Y!Sg4cM<+vi;%{gZb(?ahhdF1;cpzliDP%$ZY^ zK01s=aciEZ!&}~Z*LM4LWO!vd>hnAxf(k}JrR|soVbJfv{Ba+xkD^Ir%n3rEuA*}E z5#wn#AScl+M)(qr`EdE@yJX6EqEQ{ib+e~F+P!qjkHb>x{s;3mm z;CSD}KG=Ikmp_(WFJ{4r$egJtTh}%q;unbgoJxU6f!Ie#yqCk6W8uN2=P#&c?fiB2 z>&n=DA5_%dP|BSQ4Xk}W`(}&&g4`K`;Tg_vu;y~-#As+?P-@8b1KWTt1sRTv=l0Zi z<}jXrF$i28&9kK6Z}TzZ$dmAe|I;y0%lr=fv#9GMyQO0|^fUh=+yP4l3~2rdl>|F{ zypiMH=IFXSHliMY-Xc)tjH~&&Osunuu>dK5{jMp_^$ey-!||FvXi|HgAQu+fo_Fj6 zUTv?v(H|S}@W3kM8j4i0*;q1~8n|=wifJDV$Q`~zV)-n@F0mjuoqN9_KCZG{WaXDWaE8 zz?2@_53~F*i>DI~lE#;J z-JOH2`*+4ir{&R|iCD^wH_us^XP$G@DATjB!1Ua78vnyg&*nzeS<$PD>`e_D{rqyg z06pSS7uw=#Q~bFA7IhYGRSAk@%*{2DLn=kKQ2I(O!ZG$aSAH8M7)yZmjV`fW_Q zr*t)JR4yjIEqiABZ7y%%+J-%_xAdO@&qwh>)Sfk-ecsYrOD6bAxk47rb)I40nL1yV z`V+tDZx6fo`Qv0Xqts}c^y-}tYdYR=jQ-&m6~^*+M6f>4x;xLFUO>e~Jsp{Lm(g$t z6BC}|?dj>rW+?FJj8LgRdJRxuM8hDfR%az7pF$fG^YwSxc31Ep(w9o<%YzUp#ll## z-dGK%t*~}@7zK<6Ht?xZR_~@JF+jr~7F<2NH&cq>4qgBbleJu+kD^yb1NZ5%C@LO(#qL!lVk2%HIaOaJ7an(lm62pso{ z#Fe;bm$wwIe1+8B@Gxefx>TOoImHqv(N)aTGD2fq7zXbLe#MfLnAhZ%4SpbSo5{yG z>d7<9_sqMP%O1w^5xHKTL~>COI=4GGCJ?PC#$7>hgtUK&HFn-G?)@SZSZ3o0XvyAC ztBa*&09v8dE>f9Q6dKZ6TDNlPL(giKU{9WwJ-R7F2TttAuYc8*@o8O|_=R2B2{%dW z%I&GHjAiP{T_nG&QePJ%l1)$}V+7-@ON7rmLwBU89M@~s6f_wuaf zuBQ=x3=9-e0oNs3PSCfMT*<(KhjE+QSl)_M;FbPAfZ0cqyzCPD#A75Rdw)_On4SE( zy?pKbx9lx=t=Le<-oh}JB%mM?WR@CPFcRe2SSRE6a`@&ge|_G$(%R^>*6vBQc8!w9 zc8EOoj<)GNh-(fuPBGfHKZ@k?2lqbE) zx73;TgUaSN#HH73?!ze75hwL9JYjKAAMBXZd8~5+UBbVqP_l*(S!$3m@Xre0UNQmO z&khb1s{7QXKxPBj^8643BBR_QHExm3x(H?+-;zB-xV=~i zlUKx2v220O>WzTcQ*oNlGvzc9kI(bkEtt^@zl`3D(eM@cRz%bC1~V4lj5jjNz1_v@7AtP78 z>H$81HX8j^5?>~82rvAnN`_O=Kb&Jp$F~F$Li^{!wPO?WypSWtiT^eEYpDoP98 zhH5I7Cz{0E&Pwsw*eCB@Kg>w%kL~?0HxyOowQkR23XSG6hdDYhsXuL~FZCX0s4t>0Ps*#v!D^${y-!VGD}siM_)8G5 zFWgC2C&B(GIP^t3=`)gr?$CvfJAtx#6e{?2p+OU9e{3|r!?T?A%nfEMoB@kl-X!i@ zu|lsJ9*o%TbTL*>=3hCM(DYY0lye)D!JrWh6ioox&>vjW zPZTKBOd-|RZ-N>^6(}H5hOh|PPcvzpDulP6jsqC1J%`q}ik&!qV8qCpLlBHKvs?EK z4=0A#_loZqIDC-hyTB(-U>*p%hxL^&Mp&740=y1#*fbUzTgLiYLYwmA?Rxd4}_c$Ek{;(}ttRVE|?Zxq}|VLwa{ zPMea$!=6K{$6Z z2mz5$&3+J7EXIPzo)70)B^;%n_zXWJV@_kEyYw{X;rbPRz#BLNIYBOj-JQ>Hd@%}A zKNF|tJAC9MHk(9Ay?`HYX4r zbnrfiWW9*CFgOuVS`_8+%3yZXnOSKv#Lk-y%VH2-=h(nwbzuc0R=5sl&D!a zL1l}_!77}?TPg@;agl<{m>vEYcPSoi^OvtN9&O2ML)F8yYqNph5aPtoe`quQQMioR z>NBRSRa7*A7|vO24Yx68a~rc4&4RsS#F=ndf-z+Scre%@s-o}({teAT-UaIEbEG(9$ zWs{A0fZWEEY%H34F;=SP-z+SYrsa_B-o}({tebl=PO9eLEG&|y4I$gTjVal=WMhm} z&A(Y#AWh39+r5n`*?DARd{oW9Sy&uR%Ol&pjVak!Lib{9RL#FxSQt&qCmYReJ+mm; zSVs3^TvW}!Sy&WJ8%j2}F(nHt>0XS9s`)ny3!-Vm$l^ApWMMJgi}6r3|7Kw^G_8Ov zZevOo*3-S*#;nF*XcoqD(+bJrHl}2eR87__&W@)IC;4Lzhkf=NzS8wRlrtDUa(&i| z7WW3TbsL(=mf%%a#0t)m+e)|9c>XDmM3Xs3T_*FDt*fiznr0ygvRV%IF|WlpAkuZD*pT42C6>z^63fL~A+bEBj96Z< zMq>HQ5V8E=WfB|8gb*9bYdFM)F$ctk1?9F>WdUF(RuGiit(Ar0UTlCc=i&zERl^&n z4@VWrGTT%W3l71X|K8vUCi{0Mu82v5PBP_M*4551HjyKGRVBe+1EEUp7n<4o9J^l_ zq)|nYD)#A0Q>ZnnSyL=Dsw`+{cS7ktCWv^1c*x5rC}hgE;xDc<7foS?IwDu{VP`HZ zDPx8FaV+{{Mjw!)Ws&zD#e|@r>KFd-fKdHGV%SJN;iizNcDdlT!CQ*6sr7V%%VDPd zV@Wn57E0Z;dd3~Eo;P<1i>Syz_Zh45s8QTkH^p9dbE5zauOC7+qj{7w z0(J-6x)b5Wi$%Q2FZ+2!e{SWXFxXx$ykN>GCsT>4dj9Lt(}|p6ENQ?RAqf?s%UIOm zjA3q(ZH6^uJYVr8X-)x-ThjGVD6jXLAxR&MW*)i&NE@clZ zS7-t56{Ae`x^P8fuw-uQK39;qEKN7r#DE;<;8ZyoDca0_gK?P`g zRyqF$BFQ<+8d*P1GwURYR!H1|y@IcU7VVr5DHF>n0{K%&-l;wKAjjSgM;AK9#vAh) z<-@1$BNd#3Ku@M}U*-IArFwp%{pPDANT55jG6>Q`(8oecV+WTAgjlvzFB+nz^uK10~ z7HbqOJMQF`ZB^6Dm>FE5v{4&Dccg6N8!iQi75Ybe(iCt zCic)`vdZvHqNn-+iK-c=v?XkRtY5jJ`~Z?%<9~hLMFP63AW=Y49*frNSrVTC-v13e z(PxSFN$a!JwSA?}%5u&DT0$>CNmN>zR;(7(w~si#!)b0(vp-bnz{QNC2sR<>vO!!M z^BG~3gs@NCsI6m?<2R0@*I(1yoPnF1&LNyKt5bA7&2UD@Kwh`sc2-L#`ZtGYHZZ#0 z>O2ls`R&h~$7Q)P$Kub0e&MeiW}(sSIu)XdAY~w*u$^Pb=kEX@DnadJz-YK~;KW?9 z`#2L*yG_-m6-Vg`J2`}sV<|=X+_Ne7P|6wVE@Vv~k3$y{&8=2m4GZm5zu%dbafB33VJO z_hV?tt_qCC`$%|OChsS;)((0E?w0&^F+c7SQdS=|_IAH^-uOjp=UZq? zl56LWe4Vy-HpGuJMJ@03^`RI zhs@SQ7GQ)=r@(kC)Quc)Ojvgcyn?EJvi$m4P2mm*P;3Rav!h&~TthJEIY2+?Pjd;8 zA|9?wh&n)*1i)?JUs`YXFsNfj^xC`0{dc;52yfC3=aK;aA>`lzH`LRWai1Z^XJ%g) zFUMiqCvQ%+i3JrYN%N^ez9W+KCH4L}?l=QHDZ?d39^&DQ5~t=>eGQ4Y>XtX90;R1SsK(1kP5hDLm6x?C z*PoR9o%TKy2S}Fvrr(ygZH&kgwU%8s&G!(A-kc{ojNb$Q@MTyO|3NSbw=fLZWRvgN z!-1I*k@q$J@6LWZjPNh0LY@8YP-nmUQ4Da2AKeB*-Woaiz5l12{O&Uvej^13p8WoR zB!Ll1sk?JcPn-kg@tsq|rCvr7PB-5uZ}H$3WvCi)$VrlclfNq1wnMCXTjTje?6&f2 zMk$}bq19IO#<9*>puWI|Qm(S)z)zHFqhHyQco=@0)Ti9#me=Z#{o-8)b;v6HjXh7P zLvEtX;PZYfT2s+CtN*ya^(Z=;TsiJnC;iR^e4{1YQbPFu;|P095)Vi8RODp_hhvai z+*w({H;mjh=t|<3_D5dCXMQoxYlr*<@N!ZkTDRpy&`ile!7L$5;fqffN!)I6C zXGX7Q(EjK!d7ZAJ7+n7~UzN4I=C*f)>%rVp=g~#uM{S7hk&VG~%Qwv{wcC>IoiKXi zp^fH5E(8m{srK+~#8bagIMgj#4Vo#f%H!!6Gph=1$>D6jJXi2^vczS(@AoJM6jQMQq{h<_=m{Ofb(@kiFfIZ3}gUuFg_E({JkD31e2=qmVq zm6t~VHX6%Xbbr;CY4kJw{d7(L)GMMPa8;Qb+)f}6y@dtC5#r5~8m*Mos!heL@b@RO zDW9U!r&bI$Tjeby+-i{N$LdZBwt+1so9%%%Kf)>cW=O4m8x$^7wPl$-xTnFjlfCn0 zarH0HbUyb=M9LRo5vi)|0Wbj<33}3#Ss7;>C?rrd{__AeE zrnSbdnOMe2=6A;?Ez1=J@3#l=#~v*Cn}DNy{rrdBX5jp88?$Ch&2x@TpW}$9V(2v{ z4MQ47pbr0KuBs3!P<-UC}~owl8{0p(>8j7%VSBhSq zELs^=Ydku%bz2ci+u(^p!g@yqzl6&PSwgIDZ?w{qSh78D^ao<<=RHR!H({C8*VmqU z{$ij%tneOrV#&nK8}C7I?xAR#1k?eD1S-G@%z4=ENgy~<_K*dYqARHjdjsP=7*o#Q zYcvN+risY5jWXWos5&up8HY?;$Fd4Q0?%>7Qwg8#hAqOEx#4QUm%3pu;cMJ*CE?rM zFsRTl%MD+eR(=xUo80t^2~TmuEa!$R-S9<(uXn=}GD6>wex09T$|c2&(2f3RE^q~D z@Hq(=IHe<_qNBp&!Kr&iCV9uCTA9hQcB&gTN}5?Pz&n(=3L1g>rXs^v{vJ0d-!s`l z7?HUs2X)&xo#MT7mUn>vAB{z9js#ZIP5-`!L+*|u9&Mt8q1%dNCzSsA}umYZqG zvH~HuEVt8cb88S7-k@vXn0bnuDp0;er{)`x95+?wp_d~l`ioroAt4!s%+w~Girrni zn<{hJtW&wM_A574X8T7vwXnZl!3Vcq1Hsj8E#UEu-fJFun>)vb(d;cb-&Feuv$WM{ z#^~JVS+{~^-e;C>HX47xQmcxcmX880P;!yC^mU{0dnBpoM9)^0Ag^?)gp1vTnq`guo^+-Hct!J#ssHTAh7EV7kx|p&(n7eS8BSqMq`+ zCbPRjmX_he*za_z=53aowhy30b|;~Wb`T;@G*HFFhX@`TtV$UtabDpGl9AkO15gRTgY zC?3VISGVwD4|l(>WE53r8q0Wlee!gczwy9+S`hoDJi1Z92@Kzikg-8(%Jve;=KBot zkO`KRtR>9+qIStnHqN7krTe&n59qR|p!sXT^0#QwmyB356^quPxEgke)W9gKDO2I) zc?$I|$ZJB`N*%Ag7RQ9*18$e?bjNKm+AZA_8-WHyJob4TPpoLXO9)+MW(Y5FHMp|J z@V8;D-5MP3p2u^afEx(CVh>YBt1**nD{H~gJj~p}^c6mE`^@p4&{@86+;?3|5j_Hp z2XqPt*e|KUF^X~3Ui|sx8B0zE3X~g5U6%k9C;|zn^1S4t_f-mWD|Xr|ypSNh-yxNU zKLMzWQ1EDc>3UYf(jBDuV(eo)8&R~6_2Ml%EIX*QA}Tp}e$0&kip1j9Vx_tx&_@LJ_yn(6mBx1{b>7Ei^2xkoY?u(D94i zLIr7sP99unq+6&ktq{j`18d^=L5*&BTA?=v7kZrp!2u%;2VNsh;eg3jsB}FjB(p3h z#cE-6@ABMNQou=DfzSZsfnU)XiRo3_LaZj5YquH8aU;olJdg36EYlIb#uDs7PJw6) z^-#jHx1d81IU3W)nR%H`1+-)FeI;LmNaqlAp5^pQWYG;olJpQs!+d!T6*^at%6Y5( zhWlKv-VaIq8le&PYR=J|071I%cqIukdcxFLcC>6GB1%Q$Tu+@nJ(FcrfJJ?t)w(Uy z@5xPyCN^Tab1P;l!ZTeC+RrvGCqrAWI!_;#plnB-hg49ukWNGe5t%ZadsI+#o6a37 z2=-<;wJInS%$co%Kr%x;C1U;sKAxfcf0=)QS7kU~R|P~b=!{cA_8S?_87j!BL56d( z1Xqboyz@qn1m!H%5vRN6Dpg=PK_Gh`kevbJb*6Lvt>s^HmFoIqs;uhz4|Q3Yg$t!@ ziIh#r*XAlUsBfzBs(06^pz8A#DyW9)RYBF!aurnFKTieKsJ|k?zo?F0BhXx>08mKk z3g)U$9iR{LKWjAqd#1(Jtj`f}Hk#qKY(k^g)o%|o+Hh+wY}9D%1iBbfpjUlGs(G!5 zJbW>GSYo&TY6ybC{rTQ<&OC$#_{ujJu{{(B)V>{U9Km^~(foK3Kht8TH6?CW`vdOQ z{OKu%?6rHkcSfzT`3EhIh3jlp&KtW2&t?n8Hl8+|EGs&@D0ZiZo3zIA7fzs>ipB}U zqAy6jcCXhySo(4Ir%YNrXRmXR`IN7k zNhwd@3y7JpYTv|-d~8Ich5#M;p>zbvuY5C|_^AxuSo%-E<&91sD{g4*kL!jt3YY{E zz8DP9R#7h_uWT$h8BheG(+7gWY@9GO2?`euW%~!f0QT0nleSFz2=+22#*MLJ=F(_> z;X_iTLeoBEcJHEgZ~mvL3AmF9m^;>NJZ)&Q*=s%aY-ZqbnE^@nMw{FzDBaL~v?>-j zfrej@{^Oqt0}~BaW9hp9#TT3Ld4OpI3OKmy?*4#E&HT-9cr`+VFY5L+77SC3Sw&t_ zyd(j6)t;{rQCb6%DKBLzoZ)8o5vGb7q!-lGBu(?~3Uh(HqGqXVtNF5^Khw4Hhx{6` z0J#HpL`nLGs&T0C(A6^SMsw3{K;t&|skgM7J6TKTYM{jx(6Dwm*!_XMIXZi+J7?b5 zz5VmG0KgUe8)FgF^@6(sOU9zG*DKijxCUM6=I*1Q?w9%@cK}13B;-nI(&TV85VZty zTX`~HH#%rc8e?w{()Dm;fq%V{imMW8b zY#C2~e`#7KCB5kZ-KJgVcWSA*@Pdx)ol`y0W4#9Hx&z+KR4-6EZnHs5F`<+{E7HwA1B|`VH_oD|YUeH?iHS{nTf_ zjo>voBlZU|g9^k-o`s6vUXsZxYG(PHM(hqM1-9c#0?|3VAh^#|L-6JwJeH&uq$tBT zSgUhntv)Gh)!SGy%o}}DNCU&*tu1fq_U=zBV}UaVl60GE;*+D>AW@V4z&pF&55&&= z{2f|9=d|a&_S>bOm%k~?(TL5KE^)~{dRx)4z0plK-cXp~_C^EPSpKwTvEznCpLTn~ zEwS!TV}Y;jXX$Gkwzq1KhWB~uk76>9u=+Ysp%1oVR+vPk>oJ%I3oOvD6prIMuV^*(umX1(#?2LjFJN94Akklxn(?g8tr zpLw-2$t5Lb_lF+GoBzRpLe3T;;>{O{kh3}8?SYGj&VMO-V>Ev^qx+wp-u%SCFI&`_ zu8=tdjAwyX9J=S4_3fhfP_ycsNs%Uqy{Ffk@8UtS?maR_CEwv8u6JgHmhdI$-1~WFZi2LG4lDx@Q zS!u8utY4nZaZFJldcJ5lo(AIH=zIsohvFP4U?EGd5NSbP^%`4@hHWcj9vnH(fa2ph-?aDJd%VH8AX**U59M0ZB@uvYO)gx z)W)?QOBoVf5i3!HUo7}?{PFwB3rg;~)rfq=;$g(qZr^}|S>ATv<@{OL@h=DOuZ;^l zf3F7rJcmgDQwA@U>%sqm_r~cem&VyQe9vRazB>trs6ymGZFiv7mf`ZGKscUxMJ#)% z;O!G?#%xsvqt72%k6YBjo&E>aECKwCx-8KnWM9hSU#75+z=QdMh9;MNe9%PS#PvM> z)!rBxEvX>tf=m|T_cL9%d+n9dFt1~IjHTjp!pmb^BG8sxs!>}(({I0l^ca=EcWMk-v6Lwf(AU z!$PT;$326O6bd=55ITQti?Lj<_{xcqQW?APz{zAdbH6B8l=04$LO+l9@sbC?*g@lp zja67oXBeFG9U_{(^5BGOvEt&F%B5v2VA{E*@7S~;>+y^7SJHSTnP`}kfaoWsCZ(tq7{(P;sBQ0Fmo)rtP!F)~A}V&s zC{!N2R{B~e*OVIG1_YAy4M`I3wM8}d2Rdt-EG4qOoy;2Hw-Y*xC*D<-8nk>h%8xLt zDjY?YRG9jzq$c^*=fGJiyfRrKZxMCtuXaclFLcz@ZW+|UwL0hUu{mP!#W#nJ%~_^% zdIsl&7E=Ddj!C_Z)K88{y^7R>$D~do^}sQyXOa5xF{wxu)Ay&RiZ%!yl37=6>pAf8 zT53)0y1L46#4kX}tP4MXrv$hq(`P(%Ig6>G1@Mm3zJbk^f*^qK2~`MV>0qVQ3Gz;> z)y$li3-8-?MQlV9r1h@M@{ZsryR-BVrj17P#l{~Fd0rF@gx*$y&lB)YNug9y?98*6E8tm`ZXH@Oq(I1dGo0*B)RI=)RlisAAs$572G-xIE7a zNJD=S6I@geJtD(w7%eoVS*>l4I#D~nF01~B0tFSDK>^@IQ?ZG}gb?VG7ZZCV z6`MqCSt@oZu^**k6~u&U=i5BQn6`P zEeBQM!+k+N&p9l~u7Ug;yj+A`T4jscOKx;Nn1BG70_GEUy&}rV>uIbE_=nX&5a2^3!wDjOyA$n!B^tD?Ry+)97 zCZnr`hZiTtA^GWIN%@cKM5hh;0?ALLy%HgPbdV?H4=1IVMJtgr1GO!%QNIX#&mzhc za~r7$JuoMC9P$-I#QL0ixqmJ88sbnpR{tsslL0?0o951X+5X9YmR(-~+&IzfxktsO zt62RD$bsa|)_E`MyxVl1s5i-*tMeA>yv4-i2v)VXj)oreNQ=nC+1BI*?07=)vKGzX z7!Uaok7`5m!-p4ycK4s(mTj!Fmw8kxIyVs7qfSFRl^87D?yQ%!B>&af^{-NUXMLWV z&{;2<0QnCCmBsQq0|j{0mJvh#*P&%G9uj*dv?+C7t(8Tq;%=2(ttA)pjE6e;wqf1E zla%^xIuu1KF41Lb#VMLQM1ObR+_^XjQm=Z)V>&v|?7^Bl?l#t$__h(v-5{kNS>~aQ zsSIh(&x~8p>2;jS9NJLV>WEvWDq827WMA;?Ky2nvkFqyH83~%;grz7@&XJ@3j_uS` zUQ{W_3%!4R`xg%(+1qrbqBBNhk<|HxD6!c~$TnIOqpnueWZULyvDwbit-)|g?&nbO zCKbwRL+oWw*WGKzrXB=#N`a+e?>xXNQsYtB89rPTybzD63(po$htVqmNCf~fQK>Z7 z3le)9voq^jpOIi*_!)tI-a)1u`>QW5e@xc$daa$w&Ma%`UlkygRO{M1y$s<8;awaO z{88t6-e|>GJdTL2QJr`v0mDO1Nx+D<7RY!M_$yLV3S=6!0+%!Gs6reUGOgW5> zz#FxnR}=C&mj%Qo99e4V&77-Q(fsf|@_u@lPE$Q4eN+ZD7mO7rH9wWwl0&6dbHxwo;r&lB!-_F6!yj_ZsV@A=4xoc%{|%6W*t0q| zPsiTVu^V;l_c}I3$F}I$89Mey9s7!oy`y8d=-6@{3+UKJ9eanvi5y{au@m<>|Z*9m~`)Ic&^$nJLULUr{ryjMa>W|K!tXSU6*BX6Eo{ zSavt|qY@9d4Gp&pzZK{h(4LzNzn~X)Ilc?h5Y6z0j8BTHaaFVMV z4GB5ox7WaTp-5Rx-r>fF9=$*hqD6s~Z*;qAPNQDqd%+xZTFR{pfSD=)BRe z&=_Os7^D?5wnD7vjpjc4FxFhr%Zu{cu+y%yAC+3zxP7D`-3w#s-|3^#{Q3V*D+S3`9;OxcLUKmM z(MH$tMuaaiM)2Q_NWo2y$lk~~uy8{ECoV{IOIW?eCg0IPW3Q@XrhBwJ$*y%-RMvzj zV8v@h_jaz-c=Oi>0Bj1Ta`^Ba4sVgXW&qU7;l{iKOQ&FO3a;M9f)l)YwlRM}d7bRU zK@?8|`mykQ5P;7Lau{FL**ItJYoga_*OnWNfh}4$zfwYfiqm6b=ncPEj03ZtGy)wOBg1QuvQ(hpS>Eu6KTjCoFTNSS2MA=1RFt zocO?8DK=Dzt>#Lxuu636qp-y5=E@T!-fq5_l~`r26c(0PZmtwdsKoEhm9V#r#DAJA z;bR$zUzjT)m>G#5nJdNKDzVgDDYj9GCFV*)Yg9E%AC26^oWh?Z7>Wzc#7+ zcdHjiGp*PSV#fOpt8G*}v_UrV;<0?Zxnef$vHIj3XDrEh+~=}9Y3gExWM;%4dr~x1 zy!8~`vlz`p|NW+y1w68Jt9}I+JM6JLgS*=c|A4w+!&2 zoflkMMwP!Fg5ZA~uV$V3xaV6GTX-12mB^M@A?(9-9Om7>uxh39xOrbYwf^ZL4}o>zOQn`xZM9Ydqx z4e3Wt?;(&?*PuTC*exorbh<@D7y5a0N94bc;Tm)L)m={h&5+@w{G@tJqmT1wMB;aK zP2s~8!Hz)e){=4NiVEo8#mkOT}Z<(+A|{Ou=)d87mj6AgIh)2*EjMYDjp!wkVUz^kv?KLrZ~G5fw(RH ziqNvH&Uc_?fbgF^8ob!u7H(+4k}>KXpBMizWk`6E1j{}UZ`9EjiGnsS%RIz`q%~nr zHA^FmENlCpESEXaF*bFgAs%Vjdw`K9vf&N;*_d%sn>2^CuI!bkW!Y~fkn z=&8!FoR1c~(HS_++GsRPRFTWkAgv3XYK7YiywNN%{%qi3V6IzdgVqi5ELn6$9(qTk z;Y|3h6tl_?8sUos*3mO3(2qduyIp?SGYgC2=5luQBx8A1Ucj>>;MtDKCJ<%+J%x&l zC0YCpA1=m6tO`^Z4c{ip@D#o>VvRDb_9iPUXBhEl5nIxCu`|eX zR}VhL``%HDD@~7IE#SYui;-&| zFS1;4Db47ko~)|Fwy!HL9*FqnuC3~(HiBDd9s&o?Mt;O4z*fKA=C5Bb;Ny<4->}*& zAObi%E&B4KB~{!*70w=-MA@Z3Y)*d2mvU}1=u4&xRN%|Ylu;M{=`RAXDkixqk3+)vJc^L~ z8OiZ)5q60*O8@~oXHBh?7IGIHgU^F#&P$RIQ-_OrmOb(}5{2)4AQEaie{lUDL@x{r z`4)%seRg}Wl=WmNeqnFw8_~g;NvMa$9|DkC#C86L_#pZ}yq{;BPZcb_MbgU^=l|;cbANIUAU7^V(?_F73p(ySf>6C!5T*V={oS?nN{q5`<`3`X@HQw&%8`&%6 za4B#B&bBP2f>L5~*>0=sh*fsLI-|`h-x56Cvb(H9UBGScEwpFn^vF+tv(}0?ZY2-y2Ot$+$97onscfek#9f2VjVo(H*%;{6Du^>HT8`gL!@uyw^*?+OC`8p0B*$M z@!3)X*PZR0b7_Yzfm%6j^u}2LW+;ple;wnap2-hqWVFn`Wpa$4c?%~)c3_m^RL6K= zH)E6Iy~VgDm0*tKHS8c*wowV8@kVI}S&F;cLN$cPLR>ObW?z@Ojye8%S6@7NnW`FU znK6IH&8Kd>p`PoquS^MpHT(+xZ=)C_t*az^#re- z{3Cus71SbYHoo(kWDlh+S#{T_4C$S7Bd|!(v&m!R`_9P^%Fl_aC0)IHUXpAr$?sv6 zSEhfjEOqSHNN7s^*QDl zCU2z@reYWVoKG;bl&g}K{r*AgIm(Jc};$ zjm$p7li^%T?#spWI`N^aHOBEW2s*)(YW)_`NC|s;jI5^ftUqy77P;n!JJfrZ#h&&`!Dja#A zg?Wvz0N^Q9LKn6Awt-U2zl-l+Wybs|3g3gjQ@9@LRM(x8cM`LZ78 z9!W^zv&KZV^j@SQu?Ic^(#1bv)&%~F@us2cgA{T$4Mf%jlD3*OD2(tsgp5)62ML~( zTuyMbWP9;TU`+k#djBFE^3hk2kS1mZhjeB@e0V}6Gk6lxSFj>gSp53HPsV(EoDjnc zZ;_w!gFz-FOJJA@Uq$#JDYQ5JoA^4`Nn&McJrCGEH7R;1`=w~%_MMwOmMos+)v6B_SZi;V6o<0gg}DS_=;<(kUtU34G&Im_eCrwY@$hAB|0p%BnRd z;UTE3rM`T+503$v2irMeuD@s0Fs{b7v^Uk&m)Beu%*PLo#@EDK1L=$Vz0qurK(h9X zGMfEExc4>|>kh8s*@0MK?bxVQU?Mb?cg@esvH{U!9~R2-}^1|drAWk5a^Vf_JvxR{19!JDnx8H{a< z(OgO2Zpfr>l|x8JcSPT^7hAFW+Q%mHL4vVX`KQ4@YiXJdi`4NMjU!*-tmyr;2I^Ay zH>Q>j(M#PU;3Gf<9%S{rOO#gzEDq`TjQj z{cfwaYLd|$95p1BU8nUQdy3iM>{uZX0Tt`&F9j&W(z+?TWx0VuCmgG`8X$BS&D8*5 z<`95TEkM|i0)n?~Y)|D^i-Y;%C9BvHdzx??5NX5cARV}R{@KWZE{(6`r0FM8@Hk0^(~^QH4n$J$oUOm#tEa{)-4b6S{Dvw| zh*p#w>S~Rj?v}1=LK(UyUH_4KZ!~)0i_NsKHwmwkEqNnX+PL|~wEeMwF3x_6%HI>v zMPD7#1bN{)!C&>}K0efK`!&mh$F(D&{KTI%%tl0~vK0*F!sqz<zXvm|m-JEObiqUX470P;w752U;%yyCF+c}fS)E!jfVbj(Rl9WWpQ}B)zeuJWY zBX^DByXcq+@*N0vffYSBB2`5v?BUBBY zIX4nb)x~GuCf+yl>r(jLrg(zol6W-5kK$V;{$q_S{JnCzH94b5#t|qPb=PRC-chk| zeuj0f3aQ-ryDWU}kvRL>f#}wx`jD13IPN4a?^lk}9{kV}6%dNgr1p~?9L@qQd%fb% zD>LTM8!{)x=bWqnWTjOv-%nJo1!4Dm!nf*!_yk>cVtQE_B;{xO?TuT{-u%y>y}#|< zO+BkU!BcxyXB&|p08=_c)dXs(E^265kZYE&@fugeqtyk3j2L^>3~y;12bI+Y3y1eq=L2nAG>A+*Gx*SG$ATD|*Bn93}!V7TX z&n|yEu(FuC;~&6p=>XRVX!q)ZMLQX}tJV+&W;^dl^Ld{-d7&Y?roLAnOXa_IzqjQ3 zX$7I3YTwwDq;IBL^l!-vbL|W{2SWq~TvZ_BjnTduZdJj;(w?gP?9f-Fg(_OeaO>X^ zuaf$!3b1~o{>!PKCsrEvA_EQa1k2Or2Zf-qY8vC+5-;KttNdsvA>XNS%_vy-C35tL zKV~JT<){&BcG_8`#+rBn`J469u+HqPD3Z|!!BlY87oDAlcb4LF1DrOR;SY*A6qQ4x zq2X=sd-FF{HD(VL3l%?)284F`V^?KarR(Dd=nd7ap4cv*n}^iRt010cs8A|9M=DFa zX!f*M1V^V*Ss$eStbabGIIqqQER&O*a+`;udqpgnqbj1nbUR z{J|oxeSIGHnm}Ox$~WK8|KX81bV=e?g%AGn&w}Ha!=m6>b>Vx9GemcFI8eIH`ia%L z`%;cCcqkU7Cvq`9r%>!bs(J%F%8O?J|Do-afjneCVtHEpJOvVN!3o|*Z==W0X8$+n zvw1FRE(D*DD-;`NjdlyOAb)MyaIPaCeW6t~2D+3D$+(l{=Ox7}P6WzO$8hiWa16&Q&_!6w ziE*D&my3S}CH{D$cjQ%bOd_YmhPMr`$XteQ*a~`Y^|YIZ)(C!bZ>;JIz3VUkhY`u77U{Pfyez$)rWJl}GCl1o4k%++gVuMr`t8j`&2lqrg}y$_ehZeJ?l?&X5;0OkO{e zBuouKY#H?r|CEA zHCb52%pN90DB#dDWGpt)#muVERT#Y zjsMdx#s34;<{nN$T$t|js3g9fI|S_C^`RwuO0}L-x$Wd8I-1-T<1d*s8-;t-90|l~ zJ~P$JCh?_IMEjWK%)%h;>QQ#}2xp?qR`b=P5(i{H`}MgvmDZb`o&c{+M@>*$d|-LY zJB-*c!R6BZKHKCebMW|6`p4OmyuTe|3q@WF=~(md(H`Q0|I7GTM4*NqmHyB_NUv+6 z*upc!hf9ZAHgPePmHc1<)VgOiZVSIk1_c^Kx3AJrMfMPWy25BUk2;}-u$hy{N<*Z` zPWh_GSSn`-fmm(vUxWy=et6kT>6YjThP{&~euAg**SQwAB8| zAZ{l>eS>1c56@*(@n2HHdCN^1FDVbHZxC@8-X?mKBGy7f5AzuOYT_F%{(k|yX6Y|o zsjX-cBva|jaNym}Oek(`M8uDx^Hu)zuTP+o7kY$!_-fC7yQ&C$-lFCso<)r?zyk)O^FcPd*X)n2iD|EPT5 zLL<^6Bck2cpkKb0B<7PM8BPOXrH<_HzpFnqT?}~LhrnyD_!gzOvnNNlwI7>It$8Sp zA22VDe|YG)#9S!_)O<0!CdedLhs;BcD$_=p(5~pci5#Bd0Z(B6O#Vc+q z`gspfZ9U`Swj_EvMst`AZ2^G+A}*x17Z-|v6kdnl=e)SQ>EgK;CbdP>P4|GK&>5}I zEae&Q0t`cv@KXA*+wdA&w6zqW6woiY9k~t#raUi%FdI3{5Qhj`AVirZDg0_z%aiVWvB`Dg8MwLqq*B z6H(@6c9Z^qgN(NL8DNC;|Jt+urV_ZdHLGfTCHK7c4@X`*HkP(DOLslTkWXv%b?tco{e-pUhAHL?K*C zU#;e6LHhg{jT4z^BXS~tWz=k9d4VlCOLJsy=E#gxNQiaKW?p7V%~x^!4Q^J*sBh?> zB_kqFXW+#9bK}AL=_LdJLbE8O7DmIn0$lrJ+4@h4FTYqsDMEO7XPbw~WuuUBhD7xT z1ZuBhaF`A?+HncgmleE^1F(C})&Rq0ZhMoW51^3SpfA}Vlz`@>A%#u{;`78P1=wAZ z_BHe!d}1)*ll*o5A@t!pMV>@Q65mt!rshLr2Zln;nhoM_Q?;P*@0ZMQ;t9oGjHRQQ zIZv06UV~6SJxII%a+_K~n_IxW@k$$0cV>pKZgK`(r5F{6(Tq=VySIM3s9QKqql2!_ z#w~~A-a^XN)$i(C#QWCd%M6aMtN*C)GIl)ji2Va{!59_Z0(e7&0TS`F-1Dh2@N`XH zHpELev~JJz` z)fuMn-fB9(^ycXtyI{y!k2_XmYk14~aNn_OvZF8h#Dr%|ps; z)MzN701vEE-#Dow$-^$=QVX&QB^o zP;r#+6AQlc=8t#eZ648=RTbB1f4b)dPwW>xocQ^Ci~Lx=&xnYbpu3R`_nwE_RpQ~^ zaltkkia)ytG~SfL7b!2yOU5f;=pXFTlY}~5j((SSJzo1O=jO2y9yW{9y4b#-so2Y5 z&*&C!%$qqxwzb034(%3h2OASlJnYFdr&H36a1mIXiQ7K%OV`^QLc4s%Yaja9_AM3r z3m@;P0ZBM0w{H znfoNLf2nFHO35rc)23>AJWQ_FQ(I7fd7cc_5(ogjNjyg6Qgiop5|Na4itr%Yg(jCp zJK_qgOpLIvf-a$iK|~`(+E&uanbMoTxhcgAHhz+%w2>lP@EiH)-A!mwu!|k~6SSr4 z;$LBU6HAC6g}pKF@e@gK?vg2*QRI~K;cJF z$hbpuK|<3dG}i6a;x{sdC%W{)G*CJ4a-$SQxZ@Bl&&<$?EwDHN+?f!xLI0n+4 z#%6GerzVE4*a&1X3KV10w^^|}WLvTL$aTg8xnj1ke4|x6;>VWfNZ*bozx_VSt@udZ z;2Y3%sDV}mBv$=unIvrxBinDe&d$>VetB9VE)H{yCAq8_D>{m|3Zcgs_54A;11(Rv zK$Pn0n#$(*mwCZXT^2?wz{jBx?y$;r*NwS9B)A*QBW{~%2kDw}io_KVb8i91nE^>aw$MBax$s|6H zKYu=5R0m_Y;Rj7#rY5Fu%=v7kov9?G_8Zk6Q(fvcS7lRV((R#f05sEBUY+S)omAG25LY3F?qS~tMVx(!UaE%dYg4oMev!-)n(ul_}27ag~;uOgv4cgdP<`WN4S z^|;@E9ZA_aUwtpL!4SC;N7rP6cm)LEL{0x< ze9Nih*va^@Ook9v0H>S%wf1B^63S6Oy69kaL7k=IH<1_c_P(KF|Ap@Av($@A_ZY|Gl%U zv+q6cwf5R;?|bdNvq{5>{mGkgX3T^ru-v#2%!GTuKl7hp8AAUpeuQpIk^7JK{mZD={xNDNrg#EkPyCk=8vZdt4-!Ec5q_c>8=ab>mq-K%X@<_u zedtSCj(?Nvb8Emv=zIPDGCQ)q_FL7Skg8=OCZrED;Sk7*n+v3%&m>f!#p3xUsVx%Not}B zf`e^Ly9Js^M=1a7lIKH=G9F?iw&O(;>1M}$he3hEw8kU`^D!tx=#8+phNByoSPJBk z=MR2E`$^=33^+Z<`n4bqgcMg+l%wDurQKPZI11UlyMI(R#D4`~>KzzcyUgD+)V}IC1 zDQALO(*2o52rdk(gs{vr-<>^3YF49$^R(iI4nfFfbM4WHc%?mCKeh+TsC`Az>kMB38eG^IG&aj)ZhJGO1HlTES2%zYi-T*c#yqt;DUhot6dWN!rWl3K%|mv%o&w!jH#-7MTX%0g1Uo9M;(kc)F2Kk!TYkYbec zCU-mV9JNY5GC1k>+-op`Or#WJ(R?{s7VGpd7cP~uvnb|H>56=1Z*YyA+0VvSKd)Ll zo^@&$w!41kcTPN}#JGD;ij0=rJIS(a-mGqDiq8<(h8v^KE@@@3nHQ|LX~n9;$gfbq15`4aVUXO#W`RX?3+PtmGV;%lv=$I z-X_GC?}gmX$hu{Z<%h42Rw*q!6>v-BHVM8 zp1=*vxK80YVq6lZf+VRB*MvSLZ<#}``Z8y~_hk-!O$=6;>y%IzZix+-9Je$Ftx79t zQKy5*k63ncwYaE=rRl(}i5bE1LTH#waUnZNsq|5#VCsLVYe?)0bL~R3V0fjv&o_q2E11gsv;MI znL^G=h(AjCN#P3GdP7mznEkDwALOm)|ny5MU?}ABx}bUol}dZt?2p zG@6wpAt*<#8YP5F`a)BuN6iS_-&B<7r3^+1`dvHGHly z*G)v*qjQt$l64S^5|KDyrkn+#5U0-o#AzGyYb?dTjkTJJHTRORFmo$~;C>*dBkvQK4LYXwUTOVe=C^aRDxF*(e zu%-lG2;#{2AzWX>jlPh|5Nj~pSHWv?xA-T%-hl75#oa3m8U&$05x%~gKyqq97Eu`A z(4EGAKnEe0Pby)IBI~uHo+a3g@fB|C!|PX9$ZBmIwJ&?8*Obj3Xotb7%>3od=o??=^N)Z)Ou&08+c6@I>Ub zkgroo=TRRt4U0`(SG4g6oYpu+QXl8O!J2e5$c_pi5p^8fd!KaD1gaLWBqj?5WCs9I zfAq21i6u#-3{j_Hfc!|;Byz}G7i>KA7Bl`a#nq5OWSm1yM_Uzv$I7`w>Mmn`@QzM$RFAzg?S$VzHha?zEtHu!)ej$lh* z@X4Y^%&ELp@cto{B7V5AQteHm;ya~KXwlg`E4nCNoSLvl#>wM)Dt+b#a%(*iDkkWW z(BlrF|3M$Mq(^aXXV^nE^rq%th%Nl##>`Y8J2y zS&r664xmb$xiwL9sc~uve-fD7o@|$fu}V3gflR=t6wUeRMBpK^JIQtlbOsdI#M+<~ zyUIWcp&{=+v=v_C^99MQHckl%@!OFK^+H^2(8L|>4{3cBZH(01*oFPz#`+aD6+rb( zW~(CsH%L&N=E}U_y&9K-b@sD1^42v+>eJcrFQnMsAC{GoII#NF0do+L5IkpLXR z;Y5J3KL~HgAnQpi1AE=+$lr~m`Jn+l#ze54sLW(P0JjD{=HGp$Qx_8vm4WnPA`~A( z6Q{;>K?8nmBE8my2%CgO=xGyq>UwBln9F?Puc3%tPWq`kE~uxv>L+wuRES7*QYWg2 z9PUwSwUexo%HplyGJL+zPwl}r`jD91y9z={7~P9VSQ7m`jUKIt`dE{$7y(g7=88#d zP{dl{G$l2oReuVLWqx>(j}k9X3Nj8@CxueCreQ^ol!%#73=a?$yhELA#qWoViQD2C z*obCBDPAccW?m_tNa=fU5|1D7?<+Oy*pQ@bZIt}_$q;0Jt5rBVP*_-q8S2eX>vJj|z%O%%Pp zO9sqpzhT7S2cZxs49Y>>7cA~+%oK7RF%H-!?2e=TKB7y(%EY34g(|ny2>llop`*Ww zI)pwE(%NV*kSl(OzViL#CZb7`CnwsJ${&B>$MpiCJnGiFv3j~3}xtxfGQk z-Iwf3HfifG)W1^A&$c@X=jKBe z#KUTV8gY_TAQtG<+?TQxCr6)iFm6G5{M0`%%w8pykZ+j_uA$RIRW~HIdPzMY3Gl+L z1f8;snVgTJU;;!M!UBULGob~)kXWDY)$qW8h;&-p)P?J-qHws%y8xj`4k#391S}zt z6p(Z!-XgCBP}GQWXIM<~oCP5@m#A)-EDXI#LM%OnU)Q6LiKQIYHQoyzfY`!2Hiv=- zh(;_$>2EOf>w_0KjU0Pkz{6xp;EqmA6G-DVwQweqbks{HB4w8A>MQ@$8q~l-Y2kus ztd0@Rwe2<46z4$$6Bdzb`7)X*C6Sqscu;7s$CK_N)MVVg zYuKa=lyE{TDxF(}R+-40t5e&?+=NCbL4$p7tRcl1t7Oqg)kKFR?MT#ITe5yZTGQI% zTJ&|2$UY>3MyrELUV~;Ujqyf!G&EGBwNFt@{3>Iv-;Ls9fWiN0%QkuFb670+hEsIL z;fu_y?x;6JH5DwuayR<|#4YV7u`e)0lO3WH`HnbHUuGf|A}%;>D)z8OPw+#fm}e$} zDesH}Pa-v(%>{3eCrN^&E96W;Z={aiO3XQ-OA?7pW(R@DPQ>{x_zBur=@H~^xYUk$~P^g=uC z3#xCv;ZK7wgL&p*cKlZhW`giusVky_S|{O~Gx`(<*UBJM7->^9AC1N&IS~@_zo`;B zLS%_@_(mkaN1WC^5#lFWp1tZRjN#1iTU0d(w3%?gY?Bks-_eERU~NtMaL0E}7u1kO zf=m>#C-TBRAR{OU0&@MGuw8K+H9m&to5D}91M)iAQIXND6SE9!l$^-$n_yG$OflgZ<~llRg4qkumboZmF%#sVCy<5|d*eGbGvO|BChaC_MM5;HmZUkU{z5hCBlI^SNXSS_49Ccn zbU7KMQVie&{$~8K0-7JuUY|DXIRU$;zxb*<4Gg*>hUdPyq-`z0Nt!Kkt5GOui@qQv| zON`}l)&%w?i{;f%U-xm424c=bOgk)E;7n+oYNEpCUdBs3@-o?sI`QSbbuxz71{4bh z07UV{v=bA?m(e(-(cNzAo}8!xQ5gUoVE`xq6wK3 z*=d56icNUYt+Bn4Fa_!9CS*O$Jj&579tV}IeFII9;2{s%;0?V$(WDG*f3(xy+Qg7)0&Uu zHIO_w!k$}By3iH8c^peZy+{7m$*id5cFCGxny4tUrFa>ZTcQGSvQcl+f3S}feFiq9 zlA0X)C5}at9anR4e>-R)cv=j9HR;$ zE`bA8EW&|;VH@I5?Y`X z@DvjSwFf~eVI#^~W%0LIundaaFm79aKW}1`Y%h4z*6GuuhVTZX<+} z`DZfC$wN^(!OW+tjU-Wufdu z<9Hmt6v_(kh!=v7dEG4w21iUA_wEL9@+BGWh^Ht+%0F2V|$5k`#pX+<1!UNwP*O-l5!T z$&7KLJR$5>kx=}dMO1zVBSrbG6XmDXT}>&&T!tLUQe!V!bOi5VH~hyOjJ>sOZKQ(Y z`g!NW+v^Qx=}}f>_xuU^>varAyo6&KJ`0lbFL2BO8>!=LNS;zK+|-X{q!5eGW4(f* zgLl-dil=@Ca;-m!!c!y*(xvsn%;zn@sRkquvt-8GvqVv(NB2Xr6OpWN{G}$T-F3-~ zI-z&eD-!&esF}(c`FKt8z+P@@K2G&t>LU=!n@PoiO&EexM@(3eGLNq(PKrID-kP{nX z;>SNgHWJ)OS?)5$sH5eRuttVqY!X?4{9a@zU!p`&w}%K(_l%^Cy%s-`=P|60A%+2N zgBL*PRFk|uN^h@lN5a<}t?pRy2tx)E|4EK(m7tA1U+I#V_Z=5&Ih&?t=k(pV-mYgQbpC`;ic-9w( z=Z_1->aksQD^>`eM)tt*VeE3kEwJ<`#^pqpV_riYfTd=c)->GNh`ZA=>@8kJdVJ?k z_)1}0A|y5Ltit*uRuf=s+NL1p2Yav%#sO>q>B8}l4$R}19Ozf=d3I6`^lAs(wuW1f zAcr{?buqWCxlS-_xB|n5cQJ<&yWPC{FTd47kWIY64Dddw+?JgM!G%7_6^~xu7g+G29&PJH9NMwB}1RI>e8YYsB>z z67~+Jm%=2Y?BmCehQcNheGokDi(lOu0;R7)2Y@h9o7*$sG;&h-fPAZoo`Ul}r+}(F+Wji(rJMiqcOL4qx)Uj_>%bNQ<{!u?W-ndm! zq3jDR1jRiPY=hfvuq|z{Nmk+35cam?&6Ohelw)2fch82aigOdX*mZ687UeN_+3}a5 z3*5KiA_&u_6MHK`Y&LhXI=?qs#vY3szp|Z}-XvXi^7Jm8&me__*j%Tsn6|cJaOF*E zys`J1sE&_n)c&LBk>rjo=p|ZHcvAE!xK~4~jlr=fiR?|doG3fi$@10~vQcflisP@+ zsrkv@o(Bf*tLJB+^~v0?6*XoiNkD*@zQ-;BzAyPiMLftW?3}>D*HkTTIMm(QTBKF& zyf7w@OyzjZR!5_4#+@4C`Vg&&D00@x>@Ie)D^)K{0LV$Z+*0gq6suA87WFZ89E+O{ zGd1xWAYIg|?25kadsbs_o^f+jffT zgKY6F1-45i%`9Y%DKYhYA1_7v3DwELG1#$0)&wu{t+9Gdamam?zz!QWA(hE>7sM#4 zdnKD36UoGt&d=4YVJHPDse-S4wOA*+2AzF;2b)<~A!>bgoq+i8=CZ8094#uJDA!56 zKYH9izv1>gKZ?}Q;2u{~)PXK_SThUnd^-{Uf3#DGpM1aO4J#67){$sMePI9 zul-p*ak%)xGlhiFfzBGLYGGTRTp&}pa6t%j){ zK05I>quiK(r`z+~c(nM|ei&2}Y0Lz&x&b9b*8!^oQWr_(xNi(TpgIoNN3<3yA6onQ z4}E~0Oyhnc9gYZ+x@Jtd<*wpZN6e=GjG`#qj;?vc4c2Z*aaH`Tb*kNjN{@=bfb3n`p_#WPJ6f62U2f>6IA#$dTR9 zW}D@3#s{|g5w#CWCMAEMvBshYz_%2>-~E2bN1lcfl~{u~m1{?k%2jM6;Asq_VrnFP zk9lcR_n?&PC?;?#awgbU`e~}26 ziSV@F-i!0|6}{IJ;W!aqAi~Pxa*5n&A}lV4*e$Nt8Iiv@|5+mUT1XSp4hKXyO@v=n z2;YAb;hVoB859L?qo#eLnx*Q_2u`@7y)P66)-mTsl z!;|hS@5_G>+gEVAIjNy`o00t)xeLor#>p7xKTGX%ag(>o**x9}4nb`pNU_iwd9hj&5}IhG1zgukp;!@04VDS6QKB z7pMf-KViGyj#%Wkr{;;|xXHJqrhZLSstwAM-~ahg-l*X8+=+K83hrBdDm?l)`0ns% zwG54?P8*7mLEtC;&Q^t#I!nlY(39{Y_Kqx85Bea=B*Tm(DwNfr5ZZT@9flZIk?tRp-0k zi!_$9e%eQJ#6o-d!xhVw9*$eYn0}ZoF<3=Kp=d2jv0_l3|LjwVVJx{@zUMNZc-&O} z)VLtMqQPK5di9CZhw96Fjz2YbwbJRKW8E&CJr;bvm=&M@^317=I}{(Ck=#*xGRk7| z?dQj1YX8*GyDt^5`5;nF!Rv9tSnoe31coRbat&OnP^J9j&u+ObgL7!|Co^PLSZ`sz zuH7rU&i^gF@3&IvfcdjMKUDhptXgCi-0PWiQ0QXqTi=?E>bR~;@2Om$^3X4=>D;GJ z?L{e*iq7`DopQpRzxU3axGgoiFPGjmpYgWI@r_?Wjo<9T0}rM1ET@{~a_$)^-L==2 zKmLA-q?!9tDfXpy_okUmeuvsqLQP|f0&F*&@~G?`?^~Ev8#c)7k^hXXF^bnECo2@3 z)07x6Oph_MXzckb`U)3vH@luTk_tTKcCfp?)U>KPFFB)ONS~a>c_&J}cj~?Mda-M7 zV6^;}5Q%JQxm}iK%58~$G7&vy(->=}T->U@H2+bK(aB}z+GiAZrqpg$D!TpjZ2N=d z{hRJ9+^VfxJMq!2Hy=+u^bd`{*YAdA(dv16=iax(oCu4Vd{(Q~RW>O+klB50thBG2 z0$sH`!)Ieaj_1d^?jR4Fs$k6}kL0sn)hgAy#7j*pJtb-3q33t-gQk16!{h+F`!S&t zrUcgHJaD~(`(vA|UXQ&y+Bv5%`$|SZpgF03y-f6ZjeDdz)wPwO(w zs?TqcuD@Y0yV2#MU&FwmOMOq}Pw}`cq3u8a52G-{(M1ZUcc&;`(r#k7^4cYgiD+P( zYWG^>X*T?lv$2uXm0)k1&X^Tz54z4OPh&gEu5Y+%S5R8Bp5OktvZ3>_qGR4shq#=) z6yx}eDxLIoPHLr7R0cLU*M)a3+01VDm|34QRJ}ECbbVgBPFg}dV{W?k8m(;F&ikK@ zPwc2P%bq_!rd206xVy=ceJexR^~N6EgsqP?GB>bna}RpNWEUN1;lFuS-NDz5Z@lD_ zd*$BYocZ(HGHtE(uLp$%d<|cm6J%=9?rO*yA}6B|Vy>gsVP@NuD>J`rkxTeX6Q7{Y z4;_XDXG%@?M5pR-M`p=v`cjzL^E@v>Ikqu-ka>IVxbE1F$RZ9uaE102_Bg}FISj|x z*Vb{Kf_27@rDZxU_v!03{;(=g=Ed^|9w==vzo>L2%iO-Rp#R2$Y4SJIcs=B3*WEa# z^)|_#pF^)Xx5T*2FF3CeoVE9kB`;~4a$4&2^!i5C?Ca&VpIcsRsr>xTt===DPit&Y zW1fpuW`g6~Icmz9y#{J9?}eM|?qm-fe=z8)PpfO|@z~cm#}~+??pWedc+$e> z;GwDM@nhw)(+5<1&XY^3%u#Wi-@Z^exYPEAWkbjY<lCc?GWi>HL^U4GqDreI1Q87RH$=?lRUM{7{EBL5-Gv z&e=3RYm;YAa*cD|X3Z;|4`+9_U;g7@Y5VQ8hWCO(nVdsBowGrWrn?N=4HI9+230cxS)*^3%$1d1E_{~(J{=BEJ8~uVm1b-Er6!o@Wn~)V=UjR6DYNnG znCl&PmVM<{6$WLm`s$jyeS%zO?n?87BPVoqhP=^`88zJ2uy16Hsm$q?aL&8xASbhU z+odtN^S!3kf39S$1{jQj=UeGx({m+BSryitf9M-0}Jasj7?Aq?>S%23# z_GVAV7Q0z-pQmp%u3vUb=elQ)^*rMl1!*Hw`33!|8?vNdbi^$BaTTSjhRpo^}ok&mV7lh}i4`#FUheYI2f4K`eVp}DZ~?QULmn`h(K;(_h04HsGp z)w`+>Dp|&_*Ne+dwLGU=9sW_HGGMH2>%^roU+3io`8?=!jk_{h&iU11bIym8Idb{0 zGu3vFxNf;V;;Zf!(*H*XmeNCSB}mRKvXyvnNKU4$v{E{EIn1gw9U1vfJ(M?&tzq6t z+@{phK2y>AQ*SxvEq7(*jWguOPj*uX->auHx#CHmzA=0H8T4`QdsJbV_D+wNy-S;p zXuZn|=ymn&D7EhN4?Pa(om5S=k5o~29j7tS{q;{TG3?iP-pJOy%V3fG z1pQ8(MaGvFpBl2`>bs%G_KY4@%-a$E;n|!;Idl6)ZXfX=LTAvH7$Zlg#Sw3MM%nDV z9lhiMH_q|Q)RmgDN-O$%RxRHbwJLT?--%1EWl1gldaZ2PiJ^tT>#XBK8b6zd2{wHW z4PKiUH19=Bpu`MQ|54^00kSKPds=FQc=;YN@^C5A&z8G$cGiaCkIn^$$IN)7zI^)axFRRM#Us}y zXV$#6FMa2pT(@t|$kev^l3xtmTy4S@gbX{jaFzC`ma~gKG{34k`KV!k&dHG8GBxMbh^KM@@N>pF6pIUz1fkr3vL0=U+4GuT3%bz zl@Yw{TekGf?jb6@KWi_&`(@(gj8D-yZXY=UTF1)x(zkl!6JD#%wte#lTds4jQRTbO zTX`RDbUVIxpTDGG_UQ9>mAPH_EFMp|U-)iOV{+!HrrQ4R9zLBq`oUerp!#;->^o=f zw%=NvYkXU3pJ(-mn^`r1;jMM^d+XM!d|Pm3@E^M_#~I!$v$N7Fzdmbr>6dX^FYQ@V zSF)9_T72lZLuKZbji6M;)iS8aUp=c@JhKTJ$sV<*MU8(5Z<*QqVk+Itta}fs=4=I zwafJ_30?=B631xuT&EOqdu>+rqwH)`5yihy6?#HC2cuV)eMfS9Su7+sO;EL zt<`T14r?26VDZf8eQe9K`!5@O%<7mlX7}N*%lH1dt!Phmby|L!3 z;{6-BV^1;Xk0hU?E52y!3nLeA8X2=T5J0ER1i~xo~fR>&2HN(~C&| z_wg&tPrfR5_|@?|wb|P|Hx7T@IQqfDph4%%>;G)mKYeArqwEUr<_lr;b@clDi+83x zyc_s-L`+ljEETUgnX`LM|7^0Kub!#$dC|wC6R#F8YdUtY+;5U>M6_Pm%^Tq>k8Rb^ zQZ@c^cAsTNwbr`9{Hop)H%9I`$|^fiF?p%%gyX}r=3PzE%JUm5Urk$=8(=t2j+rw<>F!G_|BFr^cYic`eK~U* z$IxVetK;m9NAJVzR&J4fSH9w))orcfu8?WfnWK!(4&+_YO3TbzX*jso8(6hioq6cm(H5DNMG5Ygq-(>o7M$&=(>gal zyK`KVhJE6*(wgQ~aRJK1DwhRuVlM4rDpi*IpNuppm-4XB%5Qj=9%j9%yRIv4y6-FP z(f4LK3_hooY#vQhuK${ton3+<}(|w zU0IevpUUIwditA{L@?LKR*s(kBxibyn^m{Vv_a|o_mN4-IhyUGH9uOdk@|D+ghJhZ zg8u9!Gq)eFZ%)2;!fnLZGjm@qsChc`MBMbrw|l+l4(>nJQ_gnXy=Q{qSJ$MZgx|_| zsekg5)24;9o~#*TI%iD0+{S~gp(FaqmaJ6@IWQ(~UyId+lC@ooVFq?Rr%Zcyykqfz z;c2QF>z5Q6rT1yr#+q8uxnyV#r?{B@wRXQRJ5Xmq+J{&RL&t4tne*Si8TgdZE6Bk; zuKrz0jpwtrGmQ&pq{x+y7UV5$u%-DI_Ajh{ZrYTzah8{f$EQ03q%s0`TsUw+=57i7 zqFLzaW6pB28at*%^yxOZxnFhdva?Yw<;)umDw_`#9W}I7?PWf2@%~lOzGZh+=u6$d z;=12YmKNZ>QK{pGNlG!oGJ> z&-vn=9c_ZLPp3BQwo&j@e%(tZzuTg@s4bem zAx5)hKYcdU**G_^jUvPZ6R%n`TUrRVU0 zjlSwz_O7SfHFOosvdluAbW#p#`mQZqbZ^3t#;_rF=j#4=y;@3cYis_=Wp+w?`wl&+ z&6!X;$#`z)mrL*O3l60EIrYmvaee7c#i&0#&iTHPX284;<^VD#X|I$$hHRH}IxiD) zxmS2#=SG3o{!tm;TlXs8PZ}QkAb(%;Z9(5{wGByfXY7sQPAo&98w-=c_dl22-;O5K`VtCaY4zkFWMsJug;C+4OH z-!G`RbF}c2)$qH)k8PUVq95E*syb3Ley(1F$x)|9+L){LPOC0fduaAQ-I+J*)a8Ly z=eKUpzp$UFFOi?IkdY)?rr3~sQbC|QENuC@IsW#lB_4f_obfdtzxV-r6aD@o>GWDw zVf$?r!$l_(xzcCy`ej~xvY(%SYs3dInhw2c2+PwxhVg6*SVzS zo)7ypY1}im+fcW>HIP& zKoB@Gw4v*mUy|)T_xx&WDdWfyl6{^YmbYK{P-%I^bjG4_gC*F9ixgB;Dim33XZz<3 zVudB1I_G;!?xx3+%ms~~lnojx(oa;U4=Arcbb9Wo@jZv0R$6`bg4@{Q^TEen=Et*k zTs(C~^2{T}sFSrjp5LBq@n>z!ajE-y8j%k);~#q|sQuwRHbE&QaKh3+*F#T~s}#1# zb^j?(%Ne{vCgbF5<`(O9vU_X$(%T-m|JJm zta5LutKY*Z*FT+W3QH+!|J3tr(Iod1DYx(3*~{Nuvn9^_Zs}#mrnfU{3jE$2D4gwQ znJ4{_lWR8hu9DHc&2uvudc&@qA6t}rK|$Z>wCiTKQ-M;Y_1y>as;f+gG-M>t zYs~4h)4TM<3$M3&(Sdt+NrY^X-z6uV-KK1286o4B$e_*cvGwAVHIMR_sxLcfl%se? z+kA6v%Fd^^iXg{lPzp4M)y4qWBZatdl|M1kue)r--R~KpCcz;fBUf7A47Ok_B zW0GWDTf3Qo;l9#iuc^`%+&21Tbbs{B3GfK&uG0*zvdNNvw4`3C_SH10coz%FQ>6#} z^gOEFH9yz|Om>(M8goCVCU8o_9oGj|O$xrF?~Z+)U6|wCSdejLa&Fa1le})hg$r+W zuAMJk?|f>DiSFsW2hLZUF>cgLZ*ggyZ7{IG@8T)nr9&@!Ov#_`uPtF1X7tBtg`&}y z6jOG)GMcoFCE9tU|M${1We+#=Tw`SHe91fbiqwjjPMcY-2iH2X)5@whHP5=D)W4w9 zUOw&M#vZ)1n{L->ayIp*oY2pn$uTX?*UlHrciEd2tdYdCypx)yysfc5eR}!zY}FSn zpKITJuG|vgS??AU+uFy=Hd6o4`lE3`5JU^ITiqBSIP~V zR&DN0PtDn@wLbIFh=bSr8y0?bKc?Gq{Iq5Dt4y_cPqYc&B208pGY=+D)Iec6|Hxwe;fc>eS`eE3?MO zuQ&U=BUPs0WTDHFLkE2<#>S^l9gvH#BG%JN8vH zi(5EY+j!Rmn$E*>=`^*hcvI)(9M4Ug^PFoQc3#oE+}=66z4YK8?;Fx?=g1Ta&g$?E z?J{i)O2h)dwV>FSb>W<&ALna_wb&XC^=&k3S$Rb!3)6ouhYp_s61g2uwX;k2nIxq8 z8DwVZJ-L#T|Ftpm)18j%W2*RHm#xYUD%_sy`ZYIGZo-iS^OZw%bWe&~~_t zX-p(1yydi0Q1!c|w((|O^K)Y=Ki5yIZE0nG!U8~ZeFE=zn%a~zynzaTW`$o(D8Owr z1LxcJHV>9D)v&y*udJNt=a@b*&LvxNX6)x;d(X<%tIe{EIyn3EbB?VL4ijG7sLpqxy$tgcI-s-=%n+QHZ-8w)x6_oZt4URZB9_-$ojb6YiU zck$Oo&xY3af$D`V7nBZGcj>K+2O zsF|qT!zrIxGj^lWw!}M%GuvC_dVlhky}QL(KEqgE!EN$*9lgEbeV$ZI?zbnVZ(sL5 z2HL|Ej`n`(u~X|vQ)#b&ymxA&-d^qTA-!Amq}~CQNc&Wcajxp>-%JK-=BF&}x%7#H zxr1%9#l|7^V=FeNj8XV_&eHnTxCv_$6vh>gnK52sx{uj{o^wX;S`jwt-X*h% zX?>&fjr|O|+->zI$S*Qpq|-U%)Z$A+-(B4?Z1kRE;X8Q6i{?E05ZQNbPQ-%|+hev2 z(pl`}XcX1+O+@tVoi=gY2TN8?J>$4SNmg@tm1qChRZ;tvOzgX5sZ`drWo6gC1{V%J z5fW#;F3kLMW9a8if}p&$!GSR^=J}h>kO=57ALV&`rL0$ohNXwm5np#fiIdNP`di-K z7asc#kUa0#9Khq$SF-FhcK4j>+;7^H)aY2pMz5}EI&zivu4gwpq(9tmdwECtWa-z( zZLFrfw_c-L!oD%w+KM?Ra-v-%!;oPFy~&TmT{>1OanazU7l>%wEhLRv;?uWJ6V=rF9#^@PQIu_t5JOZQF>{;)?+1TT~7+K!m5 ze;(j=;cJil*IhNW<=?giXLQe$&i>q6WyqJiOSL~`T%P#REhoBzCg8j+jbHgXVZ7cO z+u5p}a_m3eRT}O6z}x!yy<_){h9&de@17q$`(77U`Tm5*7LAME6*is9On&&Tf9-?O zQ=ircDc-%4?c08<{qC9D#<{DjJ@-k~WZfK5*BTyJtJ{12l?C5aF7NtdaM?Y>xNJ^#}8fGcqQ{{#j>&r1=Tm#t!1KatPPn|Rb1Emro=hp z)Z=MZn?kx`HXBVGx<#PhEA7C9UE91}j%*$9{OupjtFB}gmVeBMJ65&JyhqxfpJR8Y z=Y{ERk74xKX<9I4M@P*H9(R<Qj}U2Y^+KSSikDe7s(Sp+~-Q!tw|~ym>0jp zJ88`v<%_HOo@ibD;9gC_mg_EwP6xc!_0$@(_I89)_M_^oL#*@L4*N>oJhCtJQ%>8G z<;M-wrXCABs&@2P*`R}OR%;y?(Kc*f^vuQk&swsxJ{nx!J!VqJ-sN8p?eJG_o}IBeSaf#H4Q}p@`--QSC&!+&V|t!Q_L*5wKfwRI24`Wu^Ly!Ysk=-I8`qz{ zpwk?G(RIPSqV$n3N&n9;^z%6^cQsip@A#{Yp4(=RZhSp_P|(5$f7Y9yyK-8;eTA&! z`mhVl-t|}jm~!W0{@cL251X4}M$GY2nKixF>`eZClh2=3GSw#@{kW)US@BiB@`J~s zBV;GtxEZFm_1MaAV^u8;%YA3RtkbH_=v~DhyeD$w#1mz#qq0jUS7Z%8K0zzx>OA?e zetEg;Xw}1}n+I%ru~0E_?(0Y6pKe>{vvyt0!!gaLt2R2i#*EOneEvjb?Tk4wkF8$b zRr=_3(f_s4$K9N5nU`G$m>53FnC-aIF6@2zJJ~I_tq!gT=_=M5m03NFH}I@cW}4QO z!GuF|=2^C1rZ!%p=%;|CtHoMYN&(;4pW4|VE`s{)T+JH#wnDbpf- z$vt5~R(NfzPS3NQ+4*zrHJZlNls-!gh+EaXta6z0r5H|7r4n;b52#+29U3J}?UinUsn{{urw(_~b4rdrv`uk3_m+2@b?OlEUL~jef`jtktOH#Ll_Ujz0 z_dzm#$0py@VU|e-TjsnxZSC%&_)*5Rufw6H18=I%f7{&j!ggpr*JWohYOyCr=+aWf0=P>lhdb@Yo5$nIA)INn1dVT;`@yVZB<%ZBAYknK*$BFmVJz_ zwIx0642B(lH*L!B0gF4ccaNP8HPeulbM6x{ZO8tb2Hj_utyN`~w?u7LX}Do{wCIp|FIC%B z`xg(qTjm?>zLc&KQI+%UT4cq}+56rMXxB=c{PmbcwvFn7>x&&;N#A_K^?G2f$MgQk z=6@O%>%`vDccio4$$M=(?p!?esZ5|?vwK6Y*UFx|?E_@S?Q|+i7;JVwZS(d~Lx+Bw zuIF-Ydj`L;Ys36SY9m`TW3tVL-c((0cSO>%)uteRHS2M6>f(8B?|azcVuv>~C!`0j zk?wzMf`@fk^3B6>qqD2-tYn*qUecStd@=Xb|*=Z{2Nw{_ntv%zrPR zEK&GP|7JW=AFIEJvr6RAf9;wgW ztbfc)OO%f6e=)s}e~|_s?<$f0IA8BEgS;ouVv*Lw|0UqyF2;W+FLP0N{eLqa$>T1L z;r>0ZkD_<{zwrA#EOBf7MZU6lw;g^1_I>MqiQoSlP`&@(%cocr{=~l-kJQEeFXCj0 z-fj8|zrU*gs=o*qj(1jQv#{tWR+uj<#3v*y0y~SpKfk^gT90{!g@i}=L`M2}v%Ec` zJXk&v5n&Ou=un>};XYnbcc~1%wL4cw|(Bk4Fg0 zD=Z=+Ivjf>BYYM``$UpNf_*~$qWoFjVLp+p(6A_^7KK>&hfp+{s9X_YVIi!jFjjbU zq(95c-y^~U1&E*|w=n0wDnIf0y*%P!<-c1VVQwVd#U8-{-Yn1HFs~q1RBX7<_g9fo zVG*d8&_`IiNLo}_7%RjhG*(>Qun3lSKxC9hsFx2bGB(6BEI9Ie0$yR>KB91utVo}z z?;f6L8c}ma_=Nj-poPTcpyC)CvqAzQBLhPH2x*MNe2u9>d=C^HfJXBO9wsW(FKLTQ z^J|X3#sK-ef7DYP<8R)Q8vA-gusl7yf@rj6TnUy{`K>z_Krn&kYd?My_a<<4ENQclsg+ZtFWYFn77^*aF23&>9cYBE;StZ?p=3PS?%S0jEe5?@P|Aw%LzYcM=We0LRw6p1gX&M+nMP1G1l zB)+01qlAj@P7G;frvp@I>avkEHJN_+9S$(TiL1pl6&ZQ_b_cNF&H^UkR{^ZxZiYY3 zqL7^ffPufp09Rv3*ChF`Uk*m0Cz4hDK8gb2lrdVC-j^N(4eWvO3;P$ zkA@o?b>yyz=nt_hI|%N>z@)tr0XA?yM|?v6`G7uf?-0>{1>ED|z9*u82;9bSp9d!V z!~;0M{TcBI{Rz+XK>aU?=pP9;=pa`nqCaWVfp8xHCgI}&li+Sed_w8_@G7`p3XM8vZv$^!I~%Fx)x7B)@fl z$#B0yeA1o^0qD1K86x_xgxeDCMiKqP;2s8d5isGWjQ~fuzlrGocm2Nv=@a_916T;Z z8<+-I1+ap<1^$Hoa{yX!r;6ym1a5PBz>Tt@#(|KBd6zqtQ5i0B`T@Iw&(9Izr_1Hc~cPl!+G`FH*QiirN6 z2r~fT_XA4+)&M5L{S@&DJzN33;od5u|5CWez1@3oa8H2yp@{yWa1Vw10!=hCeCKTtF|Rx8=9~Unin}0Q?Q$e+rnCmkY3iy94nFJ^!x% zSBmKGgD`^-{s=H>uS9?i+--NG28{fN&p_f0q!q| zPw4-5{l8p9e=md?i0}u2N%(lcB)Fd;KB50SfHvIQMD$+<_gJ{=Mf4AX+X(KnzzTq5 zz*M+DAU>(j-}V105&iuTW-!7Z2PXNg15Ady9q~zfiu-@2i2maK-z1`c7{Uxg_=~_y zz(#;0+}&91P^GDnE{z>Ea=1%Op2nal(4=UJI8|8*Csin8Hw$9??IYIPzAI6`s7wFg z`-|fBS4!FM83lwARU2wL%iqVt8>=B+{yxydqCLdov#o6_CgufBZiF6{c&J^t&r?hAnB-@bKkV03ry0tDj(iwW<)b%y|! z0FFvw*E_-;an#8<>_t#;h~`yO!O!1Jn(x6@bCQf zAN`xi-@hAw|D%8ZNB<_{r4L{b#*4$iWV}iQ*uecC{rlJP_dojguk-K!=-w`Zl{L!J~ zOG4jgQ2M_TQt3tOPcx;lX&$uIv=SPfzM75?nv!%Wx-?yuu1Hs*YtdPB6S@`Mo#;~H z{Kc4*LtGX$%q&QG#AOnfi4 zjipVZIn%sok+gW)UfLzvWAe?FdRXFx`M>|Z`Y%7FlB6W4ve3{HG;*UdwakH)0+f@6 z*28yI09HiNVlGs5@c>};6a2+rNa1;;>cmdD>>;kv}9stGx z3IWRjT>uHd8o)$ADPRC#55N=f2%rYo4446^1q=t|0wMr!0rG(LfGL1$07JlGKp@~b zpf_L#z!h*0Fa~fQuoUnaAPraxumzL>^Z*9{zJOMMCLj$k3vdTu1~>y)40sPv2BZL{ z0d4|@0&)PMfLDONfDFI_KqFuRpa>8L_y(W@Rs-085V+Q2)3cLL7?o(Fs%_&)Gh;IY63zy-j|fR_P(0saC^Rvl%4*8#5s zo(w!0xE#0~crfr_;Df*if&GB}fS&w!lDj|M&qd=@wc zI0pCw@CRTfFcWwq@J3)qU`OC8;40u@z{7x#10M$t0}caj2W|)M2iy-h6F3uiA@D-r zCg3JuOJGaji@+CwR|2mD?gs7#CMOwL0ayTcfC^wbzyuHuAnURmfIh$Am>qkUSBk79uBzy@#s|tbWOa!pnP65%M z2w*jX0-*oWBQB2^lQR7bq-;NfxSV1vF0UB>p6S0j-$>{m>H|Xz?*OkTtaE$7-bG~f z0pkdqQw*yWkx7gAHD%xOlc`HUXk@gnZ-7^TPiU0bWX2P3u$(Tmg&`}oA>kfT0iH-} zF$_|WkFccD0^xa8nj+j^ga?SQu?UY5VH**iE5g1aEROek{T*QB5n~)y6kk1l7hyPx#LBjLG ztXM)kG@Q^;>`SAa81d`*VIh#{i_x1S(A$SX0tDml=VzM7G@4zgFXTrk#vI~n0B`-! z=-^-j+VmNA(_Cy9+RT~mIL&67%R+0r$#yQzwBXS0?z9jg*o%H=i13D={BrPnh{&x7 z{6Z9mC&J=1{yW%Blty0>ei_`|T?kkWAnCb@@c(J=e4wMM?mT|qWC(!;9Tf!?>!|2P zi#UcTkwzIZNdO5lgn;PU&g9P|j7&1)WD+0+J7rN&S)H~XNzdv!hxHFpwn^RMvWmMS zqRTmpI;B>v>z>YfXti6q&3e#9*Vg^~-rN^nhQaNg)3e*v4Cl-Dd+)pN{`uWI@4flG zdv8Qn+jL=BM{M=Aj(x&k@v-#D_`x;09QbXpmvc6NQ^67-aYw@WG<)G~UHOpU37k`=YInZ#gvYuMY(8 zDZl%rdH=coVgDJmKbq(Kc;iE7U4DOc#mx&=NH~Aau;v-we7H>Wbj?#VtE3wB$?5Zy z3NUXgz@)TTPa?p#iZ^5`&~ZZ4sFOzpr+_Io4jUf?|pgR`a+&>J!W!p z^Q`%DJbQYp$(!HUZgS}5mxbMdw4(-ouXo`b;T`v%(+PWj_Mm46ochxKy|2TSmwd2h zl20XbbJo8w->1@V-f?4PuTLGgp`-KpCw=PLZv_vp`WK&f+wOJe4W3!+|MfesA3kSs z?YDotr1aI{WG(rcpS^dzx&5g_4_429eCLlZ`f$-T*FJu<_BW?KTJg~KZLgL+^CuVk zqPyD4OAlC=1?#lqtjnL;HE#FrJ>RMS;G=oJC|O#yq~bi!M+?_(y1DxAyT9?zOV4CN zOz}@35Qww}1tJ@q6$t+rbb^symyTb4}J96Vb?E5AIHos_9Cj6=dW8< zT%sVHEhs-x5S})B^!cuWu)82!UJ%axs-S+s(fO4Xgk1$;cR@Iq8=YV9r=!Cz_vrkS z`hI7%f9R6Y=`#i41wP+gclm-FR$S_?oOR7Ck6V@mc&@6r%3UtgQ{&tbyAsV@tMz9r z{g{2m#>3e6W$gNpzaWlX567;DW7oq!oa>?Wobr2P7k@SoD3?R|;Xh}xVi`IOPvAw^ zbhHZ&fSKqZylg5@_oCr*cu`i3cEfLhT67M6fFC6d=rp{Dsk^Jtez+a9p=0oeOzB*W zmKSZZydZ&g!S6EFb{%>c{s3&2H0R@&0$U{weES7TZ9^yF7iTE-2s#U2aG6qj(H=N? zxl*r58u*?{o}|$!csEo3)oBiufw#=zT^~9HPrXK|8E7}W5O~mj_%2W>Y2cZ2c@K#8 z!0n&`9fO}>I;tN%1V8OpstKKe|COo#5%e(p2GgL|p>yzsH_|S&2i|wHQV*iD@WHPt zwNo_wZ(t947@qt!+J$z(X|NwHd}}jpM91K{ZAu+Rd*Qm(N*zV};m8_%d#95Iei}?c zXW)BqWlTe-;1}^nxzSm8+-ChoHF4~P_QUPKFKOUsK@&Oy z&tb~{Dzq1NC3t^|7Jj6ce9=Sj?seEi(!(#VSE?VKg)iDbIj#v28|{a;fuj-+fBL*qpP+g9q#grPreG^L`~rQ4j=?YQ=PQKH!dqXW{pb`t{14P0 zEqvnv`U@R|Z~Z0TQ*;bI0B%8N;f5o8H_?9hx4*&`XkHSjarS17HZ9h9@gS{Xo*dt4a-Z5FLa+ooJ{WninPN+_MaI6zzu3o@%H` zXQJVQ(^&M4&cZjJZK!GJApFB~3^g5{gG(+plpF1W2SFuz2yVZ`P*vy{ybjc&lklBj zAvy&=3K}Fm{4DUJGw=b>gwDdRfmP@nd>Gt<9)|1x*ib>VAKrMWp(5xceD_R4CDAGP zMbMAV!ZR*6R2uDp8^A8KA3m4A?K^~a!{=UMsEla%kjGG2bPhgvrJ>$LXW@;r4fP&6 z2@is!=pp#*N<)2ucEcBeva=`)egjNG=iraP6tud^Q0If`Xg6E|+-NVn8O%VZ;8|B2 zsvPZsW1tc({5{}B55d>Xp*?6X+yhpjlkjUGh|a;cS79HChv!~ns11@H_JPf4Kl~in ziq63E=3+NV1OF84MCahOU%^(A27U?bL1*FD!CpxN{|sc%!|=t`hT4zzz{|ivbP&Gc zTIwh9@D}hkIt4#`9es>W!(W?csAG~I{uq=^#cp0hJzm3@L=VA#TZgUC8F*K{p{gYw zetr>S37v(vUymKoX?W>k?11*eS2i#%(O&rVCD;L-gZml{l|m=sqqi995w!ZMq3*qn zHlkDTsd2^w+6AuyIdl---fgHO=rlaN$KYZ?|HAiyN$3>({a%itGq8IteJW{SKd40u z_k#v>8r}<5NqYDz>ly!OFT58dBp#mL$CyXE;kUq6bPm4o>xQ}??SacT80taM@B?5c zIt?$|NS~sE@SPxoPQklx=X;3Gz?Dh*2Gw{+aTsP34hmXPf)^Qcg zH=8tGO{yvLj1QK^#`&EYN0#@56IriPQR*2NbjC{jjtq0ulyejDhM^1(>~JWD#|Vxv zYmLUgU*d5DjhJEA7|NL7R1=H~^64e)WG4|%Nzf59{PdhM;hLaa7f$m0QE*~xg1;)6Ti6q__^``Gi8^u_8X=__>l!oHBQq(53<=8TuMSk~0xn$HMJUX8YXEta=6 zF6{NRYpbnRI*SYA3+qQrdk zVr@HFTw}qQE$o+K=M~n=-mWtyGI!-PRXFNLzVqhsvrjy3^%zoW?clDBnj6a88BkosEJIxB54 zmbSO(>xlH$r)(M1HL%@wlD~|Jxc$33ZrsE}r6s22 z*gkiXI(N0qPdoF(W0no1eCwVgb|}2YNS$`*vc)DlY}Y~g zo^2}fJ&|!sB<_P&-rmGfJQoNrGj^(-9cR(^KdS#gE^X2t(5*T!OLq@IQ4oX(iB z$4Qz}=BAE32@#e!L6Q0s{r~Fo@XvQFlL}Y*9A=wtKnu#fJd4kFsQwyw3O^g;u8@cjQC!}FC+d8@r{U2MEoD(R}p`T_%pwHt=StJ3tEbgB@TO*bSZoFMxjpKLT%ocfc>e``|agS?5rb!CByZa0$2^ zRDx?kEm#6>0znW4aj*ew2HQYCcpU5j`@yT=F!%tJ)bkq)Ob3^Ot3fST0d57oU<>F6 ze+ixd&jR^&Su1Dkt5+uBMLLC9rTKOBvKB|y;m8^sS$`vIZ_Z;*^ZClHE>IUT8*>IT zhA&~3YdQ0>E@QUsOlAPjV%DjLnaUN+-mPTD@YT#>tzzc!TxQc&GXwZKW|ex?d{v`- zs#evhdbNN#qKlZry_k9AOH^MZ+;Zitwn#)Z%Lan8D=cQ7NM}p9D^wW1x>8vS=|@Dx zh^mS9Fwd|x-bzO1|0CIq3XzH4l*;1#i8@ktKC}+hk)MuU#N?-nfIT!4@UuHsXSa38 z&tymD3XTM2W`q@J49V_NI!80GI24Lm5z9k~+T&9vbt)nkni~pOshZdiOv%h98Wl)1 zGZ9jC^yMc>B3dJ%<~VaDO&RT$W33T5FcK43OI%x6wki-2jfJ}4P_$kCHz#Cv^tDIW z_KPsZv}y|Exf_bMw@WiDfjyD=Y=lO_W=XL)JAz5xOw5wJAju<6n@p134-nm<&>BtV z`4kY#o3*1a5n_bo$voE6rR&u@lKI*=J8iKcg1PsZ#Wk`KmW~rGy=e<HZ_(VYxl41e=A`C(HTP@Yp?R0) zr#0`>d{Fc2n%~iUMDvH5730MI85;+AdwkKy!JDc!6bU6lKJIGa*5=4^y@ueJs*~M5 z3!~M`2Dc<%58DrQC0HiV$~pw~%87A{+SDOiY}0DF2@}bb1Rm(~mqRnj$;g&dSOZYw1SF)rh zk_gLbP0<^}Z6O~Um8xe;%q157P~4mc&W4|6H9~QIV>Tut)W4paqAZMPGM}Ct66ISatd-4?o{)OQdD2YO5vMMcb7dU}Kd7u2 zv$?#*A7`1MDLP^oet!l6JYh%KL^hmY)mW8lLboVIZukpKNYL*iDrW+rM@q!tF<$x-gT~R?Kb27 zLsWvFEzHYM@+|Pbh{bh{H`F!Et}uT}QT!Cj{zE}$cW-MvVb#ojxBG%<*XVTzR;#V` zQOSaJQr7V?{+wALmS2An)Ep_#hdl-BI6h~s{z5g!^8bp@%|**`?Iy(l_IUAidy2&K zS|8sSbNiC~PArkL@}HR{m57yc=jQ)9)reZe>TmAr@D2FXmYNBlbN>3bd0(HDAp0%k zd0svnMfSvv{%j+{Aio5wGQ+I9>>#%=D=$Oj+{Mla-0;_apN&{MAxIowm@Db~~=)3}%s$bEjE@F7lQ~ntEd5w4u}F5K8JSV*)j#H~uNPOnREP4}mFruU>( zjyX~sOAc%uNDcH4qz85m3=QlV$P6497=Gf|6Rs!ygTcYrU~(`um>wJ&%nW7+bA!W! zYM41!($chx(ma&rr?gl)nNFqC>7jhNLEaaTWE#h-(ui0-EVa`yM2>xaUl#Z;*J!HQ literal 0 HcmV?d00001 diff --git a/src/SDL2/VisualC/external/lib/x86/LICENSE.jpeg.txt b/src/SDL2/VisualC/external/lib/x86/LICENSE.jpeg.txt new file mode 100644 index 000000000..78c93171f --- /dev/null +++ b/src/SDL2/VisualC/external/lib/x86/LICENSE.jpeg.txt @@ -0,0 +1,65 @@ +The source code to this library used with SDL_image can be found here: +http://www.libsdl.org/projects/SDL_image/libs/ +--- + +LEGAL ISSUES +============ + +In plain English: + +1. We don't promise that this software works. (But if you find any bugs, + please let us know!) +2. You can use this software for whatever you want. You don't have to pay us. +3. You may not pretend that you wrote this software. If you use it in a + program, you must acknowledge somewhere in your documentation that + you've used the IJG code. + +In legalese: + +The authors make NO WARRANTY or representation, either express or implied, +with respect to this software, its quality, accuracy, merchantability, or +fitness for a particular purpose. This software is provided "AS IS", and you, +its user, assume the entire risk as to its quality and accuracy. + +This software is copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding. +All Rights Reserved except as specified below. + +Permission is hereby granted to use, copy, modify, and distribute this +software (or portions thereof) for any purpose, without fee, subject to these +conditions: +(1) If any part of the source code for this software is distributed, then this +README file must be included, with this copyright and no-warranty notice +unaltered; and any additions, deletions, or changes to the original files +must be clearly indicated in accompanying documentation. +(2) If only executable code is distributed, then the accompanying +documentation must state that "this software is based in part on the work of +the Independent JPEG Group". +(3) Permission for use of this software is granted only if the user accepts +full responsibility for any undesirable consequences; the authors accept +NO LIABILITY for damages of any kind. + +These conditions apply to any software derived from or based on the IJG code, +not just to the unmodified library. If you use our work, you ought to +acknowledge us. + +Permission is NOT granted for the use of any IJG author's name or company name +in advertising or publicity relating to this software or products derived from +it. This software may be referred to only as "the Independent JPEG Group's +software". + +We specifically permit and encourage the use of this software as the basis of +commercial products, provided that all warranty or liability claims are +assumed by the product vendor. + + +The IJG distribution formerly included code to read and write GIF files. +To avoid entanglement with the Unisys LZW patent, GIF reading support has +been removed altogether, and the GIF writer has been simplified to produce +"uncompressed GIFs". This technique does not use the LZW algorithm; the +resulting GIF files are larger than usual, but are readable by all standard +GIF decoders. + +We are required to state that + "The Graphics Interchange Format(c) is the Copyright property of + CompuServe Incorporated. GIF(sm) is a Service Mark property of + CompuServe Incorporated." diff --git a/src/SDL2/VisualC/external/lib/x86/LICENSE.png.txt b/src/SDL2/VisualC/external/lib/x86/LICENSE.png.txt new file mode 100644 index 000000000..5472ab253 --- /dev/null +++ b/src/SDL2/VisualC/external/lib/x86/LICENSE.png.txt @@ -0,0 +1,114 @@ +The source code to this library used with SDL_image can be found here: +http://www.libsdl.org/projects/SDL_image/libs/ +--- + +This copy of the libpng notices is provided for your convenience. In case of +any discrepancy between this copy and the notices in the file png.h that is +included in the libpng distribution, the latter shall prevail. + +COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: + +If you modify libpng you may insert additional notices immediately following +this sentence. + +This code is released under the libpng license. + +libpng versions 1.2.6, August 15, 2004, through 1.5.7, December 15, 2011, are +Copyright (c) 2004, 2006-2011 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-1.2.5 +with the following individual added to the list of Contributing Authors + + Cosmin Truta + +libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are +Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-1.0.6 +with the following individuals added to the list of Contributing Authors + + Simon-Pierre Cadieux + Eric S. Raymond + Gilles Vollant + +and with the following additions to the disclaimer: + + There is no warranty against interference with your enjoyment of the + library or against infringement. There is no warranty that our + efforts or the library will fulfill any of your particular purposes + or needs. This library is provided with all faults, and the entire + risk of satisfactory quality, performance, accuracy, and effort is with + the user. + +libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are +Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-0.96, +with the following individuals added to the list of Contributing Authors: + + Tom Lane + Glenn Randers-Pehrson + Willem van Schaik + +libpng versions 0.89, June 1996, through 0.96, May 1997, are +Copyright (c) 1996, 1997 Andreas Dilger +Distributed according to the same disclaimer and license as libpng-0.88, +with the following individuals added to the list of Contributing Authors: + + John Bowler + Kevin Bracey + Sam Bushell + Magnus Holmgren + Greg Roelofs + Tom Tanner + +libpng versions 0.5, May 1995, through 0.88, January 1996, are +Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. + +For the purposes of this copyright and license, "Contributing Authors" +is defined as the following set of individuals: + + Andreas Dilger + Dave Martindale + Guy Eric Schalnat + Paul Schmidt + Tim Wegner + +The PNG Reference Library is supplied "AS IS". The Contributing Authors +and Group 42, Inc. disclaim all warranties, expressed or implied, +including, without limitation, the warranties of merchantability and of +fitness for any purpose. The Contributing Authors and Group 42, Inc. +assume no liability for direct, indirect, incidental, special, exemplary, +or consequential damages, which may result from the use of the PNG +Reference Library, even if advised of the possibility of such damage. + +Permission is hereby granted to use, copy, modify, and distribute this +source code, or portions hereof, for any purpose, without fee, subject +to the following restrictions: + +1. The origin of this source code must not be misrepresented. + +2. Altered versions must be plainly marked as such and must not + be misrepresented as being the original source. + +3. This Copyright notice may not be removed or altered from any + source or altered source distribution. + +The Contributing Authors and Group 42, Inc. specifically permit, without +fee, and encourage the use of this source code as a component to +supporting the PNG file format in commercial products. If you use this +source code in a product, acknowledgment is not required but would be +appreciated. + + +A "png_get_copyright" function is available, for convenient use in "about" +boxes and the like: + + printf("%s",png_get_copyright(NULL)); + +Also, the PNG logo (in PNG format, of course) is supplied in the +files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). + +Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a +certification mark of the Open Source Initiative. + +Glenn Randers-Pehrson +glennrp at users.sourceforge.net +December 15, 2011 diff --git a/src/SDL2/VisualC/external/lib/x86/LICENSE.tiff.txt b/src/SDL2/VisualC/external/lib/x86/LICENSE.tiff.txt new file mode 100644 index 000000000..85b375aff --- /dev/null +++ b/src/SDL2/VisualC/external/lib/x86/LICENSE.tiff.txt @@ -0,0 +1,25 @@ +The source code to this library used with SDL_image can be found here: +http://www.libsdl.org/projects/SDL_image/libs/ +--- + +Copyright (c) 1988-1997 Sam Leffler +Copyright (c) 1991-1997 Silicon Graphics, Inc. + +Permission to use, copy, modify, distribute, and sell this software and +its documentation for any purpose is hereby granted without fee, provided +that (i) the above copyright notices and this permission notice appear in +all copies of the software and related documentation, and (ii) the names of +Sam Leffler and Silicon Graphics may not be used in any advertising or +publicity relating to the software without the specific, prior written +permission of Sam Leffler and Silicon Graphics. + +THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + +IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +OF THIS SOFTWARE. diff --git a/src/SDL2/VisualC/external/lib/x86/LICENSE.webp.txt b/src/SDL2/VisualC/external/lib/x86/LICENSE.webp.txt new file mode 100644 index 000000000..da8a6bd83 --- /dev/null +++ b/src/SDL2/VisualC/external/lib/x86/LICENSE.webp.txt @@ -0,0 +1,34 @@ +The source code to this library used with SDL_image can be found here: +http://www.libsdl.org/projects/SDL_image/libs/ +--- + +Copyright (c) 2010, Google Inc. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + * Neither the name of Google nor the names of its contributors may + be used to endorse or promote products derived from this software + without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + diff --git a/src/SDL2/VisualC/external/lib/x86/LICENSE.zlib.txt b/src/SDL2/VisualC/external/lib/x86/LICENSE.zlib.txt new file mode 100644 index 000000000..a849723e9 --- /dev/null +++ b/src/SDL2/VisualC/external/lib/x86/LICENSE.zlib.txt @@ -0,0 +1,31 @@ +The source code to this library used with SDL_image can be found here: +http://www.libsdl.org/projects/SDL_image/libs/ +--- + +Copyright notice: + + (C) 1995-2010 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + +If you use the zlib library in a product, we would appreciate *not* receiving +lengthy legal documents to sign. The sources are provided for free but without +warranty of any kind. The library has been entirely written by Jean-loup +Gailly and Mark Adler; it does not include third-party code. diff --git a/src/SDL2/VisualC/external/lib/x86/libjpeg-9.dll b/src/SDL2/VisualC/external/lib/x86/libjpeg-9.dll new file mode 100755 index 0000000000000000000000000000000000000000..884068edef3befd3f9cf409587c62eca4a587dbd GIT binary patch literal 223232 zcmeFaeSB2awKqPK3?#zH8D!K!M;&!;4K>#$HC0kV9Y_LcjW$Ynv7*uzDJW_xGlBwP z@XSC?Hv_3?Yg@H=z0a+!K803`2r3D|jM!=+R1M-wu2!94L=h_lQ0Djju6<^b0QUCz z{qy|u|L=`TgfVQA7_rXX7x( zlPA4&?gnT5OXoJuo-;4dbo*^Ty8ZjN1b+DaTW`HB9QeVFf!iau2IkxvsQK=sz%94U zyz!!wPaYDqQ8&~&9QDqV9B&=^kE?Q}^*Dx|Kh#-px?_KV!!Z-o4RbikyomMiKdD_a zN5Y6E-A?@HQ~r7okC&NOx};tXM?mLe2Ij|~Jfek;*G|F9nnFj@U;&@_XM3T;?>=!9 zp{}+rpaX}a_jh~?JX za~$AL-(Sd4)^^eDI^o<9-~pr?k7w_(>1Kp3`oX+;%o#fwKTYK2@qbarjJAtz)cAx) zQKTdPzd0~H$_-sKN2e1Wu0eb;(p`C6y0(j|uWn>XrTkfkc#<~d1nI(ag}wmOwb|*W zogm%qH_pB7hYsB~Xd}vq<9o-YBNzVP-#_8NB=bXG(iMy%NvdgYfx~hIt&Y_CdkP%! z-H*&({K%X~X5uG&a#C1pZuOP7UE6`j26nn@J6b1O?@a*?kDBa`cSROF>}YyqPQ1-n zc>&_hlvAD6^e}J`n(-vUUvZ$U6i{V%njgB7H9<;?15X#xA#N@TOBH`q;4nXQ$J-)1 z9&Q4_>@6^2@9G5S;F0?4hXoEHAaP^wwbx&_#qBT;I|UHgJM&?7NA(SstERa!-pXzx zb|%p0N`AFp$=39sD_810sJ$-rrSjc&xlSWC3|Zw3wTit3)O}GTI=(wnv~T%Yr2FB( zm8^UC3^m!qDpA6%#$d6UTx@xR+3i4X4k9Nssd?JV+tL-;Y&NkT=^YP~=V*k~`9DPy zv{{|uaSyWv2=V}Ab(k4f>{uD3SuFALW_{6FRrrI(Ej^rSwCZ^;dqS7I9 zk)iUoeai=tRuryVP`I~=+)o#Sh*lErS@*~saHW`!LCnhN)J?#i&K}KX5hbngZ2~?b z0C`+Gj{}cXNa$cjvLL++Nvs2jXD+~t1M)J}`s);{bCLxSD2;bnr@B0k%!$<7k`ul) zwF|;$EeaMBEwiv{pFJpzV{I{y6dJLY0gdlAVx4#<2QfcL&n9mChqe9M>u`^%n$vl zF&In^@-}IaLeGQ5*9S{fO)!u;3yICGe)P!1lV1Tx*#X?C`S%t$kjtHUjr!uc4k`j0 z-@_ra9y(1mBD5-U1kjwP)}Z@tZ1S#|gWihh(;751wU$??ALfzIT3FGoZ*!W!>a zg_b{<^(;O5CrpgUOKhG^Q!EnsR9lbU4+;*4yf4_eQ2L;s$;XCdox3emcU| zj`Ftlbisiw1)n|^KB>ITOcukX2KWLE9}bGtio03!K7gHY*R>rGYf6U~k`YkV-bBN%AkD_I z7l^I*N8u5a1|OP#y!TXqL@1QG063!yPDcAK&I4C_0E943DL;@oS;?E(>8#v;N3E(Z zhWHM(np{>xv5g^y#ChcgNo#P$+9KOjA+kWkMh?VUxqtp9T_|%m6!#GjHkH`|R04Oa zYM%r=&=~=9tM}UL(*e|5RR=1~UZ9+}k#g*XxveXb`CTj7oa-Np&^M+BN27mKskKb6 zCVJz0BMring86l7Ig0}GE37c|X;ly%+m&tbYIyvBn(Ygp4t^Tz3(XEE zBOm4k0p+RF$=2j16Fx!(Kf1n6ls#WST-k0rZMf3Zlv}&)}JM+X%F6yAcljAU(F;&w9ZuGHV zBBe+VjH7FT*#7I2FIMNv3$gY=2CB8@Ii{#l-)B)2I~1JtL^o|m^Ei{j7K9ul+sw9E z7ErU%JNgM$>aWo8na8wYVe4Dc6GVkY6AC>yp19I^xw%D6Du!r#bvsz&T@Wd2yvXt? zIbn1=BC`O#P-s%C7lBsL;U{&KoyLSt2!lHT0G`EE#i)qL$JH*p`O$BY(A*jX`68sv zcx62>a%EZP23LAMf)o?|nz<*ZFZ%dP-p)F4U6cs)q(J44dGm7}vaVl;)Lj~txJsEc z>Jk;S4jf~`!IJqGDUHST< zUI65(hI%1ud6#6iw|t7^FDp-01_4S8}<0E$Gv22kX1?6R`8)V%|OO@HhitR%O?f@hETiU6<_R z+DGJ~99czP(j!S$A*9T2V+3v+DJ0OJz76qa(m88m)~-5CU?Wz*;+_9gFH@{nWrY2XPmN4Wa$3V%3e7n#XShgft5#U$*{j^peIKjAxxo)0Xi+M&S*`5f zE(`@8^$&TT(}CL_7&dV!YGZpSlUmTDmZB6aXXkb>ggct4UtxBp>V+03E+|^k$2~WonWSGup4U z_l~gk8|&LrG}DpP+R}b_MD%dhh`p!N7C{v6N6_5r0>$NRD53~S&6|DB$S25gsAWcw7;Z(jg27bTdn;YvOt#F3XsHYk~pt3@*Z%dX8^N+|1+Nj z^-P}!u$H$44{EwE1sPGK$t2o)hw2La7_Y#A_o}QBzk)Pwby@qbEpNL%JsEM*UV?mL zAM)xz=1&5Izr5I+oHOas9P<9DQTlK$@4ya<=J(GDF8v7af_GM{S?zVE53m)r{%}IV zZ}y}WAR-Ua)R!{-9|4-xTKRnQV4Wt{CSS+c-cpdhkvQ(4J&7IQPF71;+*R zTd!-u&KyCyWi(-|*HdrdMTtg^A84*F??OGPlVw0tPp+1MXX4mbD{Ij0RIxvQ$&jqvW{Y`Ab@fkiMSFKs^N%zt4kPL0#Bedu|_g& z;LK4)%kWEcC9;t*)aRXr_p|v)0E+KA3_)?N1^sSgbH(`h0TB9XD>a-I)4O$(km57BIxN@pygs*%Xqf_$%HaiM1`C_$U)dDD0z8(={=7Q7} zGtsI9>snX7VyqaBO3jk;P4L@^Is_}%v6+lj^C4p9)~XFGQ`UKY!{rB-nAph_U++ z3xLHr)Hc5IZSf<ns5jcjCq*87i-n}lM56Ss5nwr{MQ#O6SpZpe;;)cd_6YUmAw7ndJ^xXbK_9RmO({J_@uu-`R1v5|&%@AI;i|;>_dadm#{sPjt$XMB^n6VS8))9PIF~O>^uz9 zb|kQ1TCXuoig(?aKKME#!XF^JM=j^XB{3~q2`y->6#E9%H`@Y;^#XZuURCoYQE@GL zinlP_>P807lCPvc05hOZq;5NVK}CEGAZQ5m(q6N(Fty_|X>JIjOVvDxYPiP5+wOc> z=Q!BSJmKxumK}SHIPH1l)P1ct^>gIR_e-lcwH)s@e}vjqwDC2ED?eR)w$SIjHYdY= zTZWPGN|La(v`?|Mvb@OID9h@V^r;K&vPgC6Y`kP1FngRV%Mvt)TO!);O%<2)OrvH9RbM{NB@*MEosQf7D(TTTw1>T z$XtdVQK24U9`&5a*zWMjY9hwj@b@TJ7++UXT`x^?2vy4{Q}Jyiqj^;MZgSW9YKUFKGQA2aB0K|iwgrM^Onr`D-uES**tD4trEX@S38 z9ClUcb`9z&#@h0K00o!i<$sEnf3X7~|I0<{e=a>hnk*@Y&l1*$1xe?Zb!<9aZ*EKgj5-^Q|IYux~4E5#fmtV4;aRM1BP)9=X&^_ z3(wi}xpBMKxi{7Q38>ZMwv~a&!UXI;Z2}+05&Lt9KE{h6;yf72GJ1&aO+APt81Fx1 zo;0V;=olrsSKZA!E&!3~SK;(UPzl*c;P|se1XL&aBZ&r#bA@%V-;b?I(Q~^vhv@4%wQe)-GL~!r3 zv}I8PpGwFG5WCL@K*IYo_*XD^dSx*1piOEL{)g1O`oh~QpeX#xwLvtn{MPtlG8v@kje3p`b96K(K#n;&60W(fAlFG!ixHkANI!2M#XH`SY+UP{lhJfX1U ztYl91Xk$!AhMepj0gXrxD*fq`L9#4EK=W(d7@`hh=u3T77r`oumGJ_l4sCCxXk)k` zOtdlLJtz}Qre?J5i`}#urU$)bFIvEn{w;FCHDa$fh+B?ROvLxO<=_oADR4zQlj zBtyk(&c>srwH^r_$yh7975}J&4|^i-bw;Vxer#gVp@S}Da|6qAs@51D&8K0Vg+(XF zyO}9DUWTI%)#3qEMJa7&+FALX;@eM$tu`=~HQo#Vn+my)2cLMoW)ZsU6D-#1PEH`J z9I0EuRWn-<{=S(l3{Q;1e-J)fJf7T5B1<%Io9PuATfeI-Ls+RB)|ZHG^yCCr>!nx< zmZTkON(e^EB>--(=mSm&VIUk1pyT2^5Z!tpqRiXJyl>Rw*L28Gle(Y0Qjf9<@!id} z<-0N4iakUosViNoAwQg>ce;(W*wrDu6vj(DWK{&wbzIr2U>!XW!Z2I;5Rom}tZF@D zYQ2anGZL2q(%w^mm(i-0LwsqXma|LFrkfyArIj1lRgGnT1$P7%B@&rkRv0UzfI?PE z@POM8lGQ}zXZ!EfU8B|2Ro0RAcZ=d(&EHn_Plk-O(=q$Pf_GtKunf!&Cj38jzARkF zVn*R<@ocj%;V;S*STDkPR@t5S2}`gV z+92Y&C^$`RU=IMS)cn|qN26NMh#r6tS2y2gKKpr3ffJ?3QZesMs5e%vp)LglR!rK7sSu2!40G#THg9@5T!(6b8_Ws?4ju$&YF-0Z%F-K= zvv6*(6cP2o>5%ezaPSih9A#ssxUJ;kmDUSja#g~D>^U(;hT7jNYM&Vl6(Me4F@#;#uRV$&Tg`JJDs16sSlP$x{7_!GKrh1|1jy4jv(9mA&PDFedg{mrh0j)FcJ{eH! zW1&}&+G@pExfuvi(HfRqen8@;L&zSuUzDDfyh%`StrU(j#Mf1#C}UZG#Z-?5kfKs& ztgWs=xB}tP2$vvSqN=MXs5QET087Z6h4BQjAAu18r;~{gsI0CsR-Pp?9xNR*v3UM) zLJNVavbx?_`3N$KB%>@ek{4m(_aO}7eaeUTFy65&g^$+>X&2N*pZEf(>7_+KP788H@xMi4sVMtPruPM8)q_ z!{=t3%Xn%C0+st_SwkXw(|BV*U}20>bJ>Qapp(!26;sm@d0epo?o z2$;1LD372YN!({({RnYsu{gA1t#JZUQz;{rvFdVmAMV(oq-c#ChDHv92UtVnwvzBf z@VbtQSGSz`IZfd&031!==zfa$8{k46sDq@WUqvcgDoamG*Xdq5+L{QCqq9ytkzzLK zyy>r)RdpRIA57B>I@Z3{^Tp{nvG)F2#^AYg~7xV+ifiuU5y@>bcDW+Wz*Pl zM5?LvkkcC)F~-f)@_e(~?3e~Ls=-Sorm9~+iB|;&P54ENd zX=ipxlnF;La>u}Bv*y}>h@xa zIbb1e-uMo71KGuISul~FDgyT}3axG?rDKA?F$g|V|4WE$7$NX!%%Kbb-v zXY+wtcqPRMaBK{;h!N-N3A&cgrE6>%eBT-nkr}{0^2*=GzweQMP_uASluC6lmUUY) z37hJ359Z)azW{})tfZHR#k*IR&{%Wi*z^G$x0fTNos$6Da>zND`n?OO)+ zvwdsOwgGf6H#h_;<6X)>RJmA1wrh>FGT+#)ctb1m&8Oeo`ps{|cA%j!34OuZWpxnLf))HZSet(+oUt|r|(EOIjK!xVITewahmV)aZU>WUPuo$mp z(D-i3t-^@sP~J=9+mx%!7O67wyQ)l*f!C#F;csD;6*bGr%NZgp-#JQ7QB2H^=%_!p z_={Nk#Ptlji&~}+;sW~^S1|H21l-LkjCS5>ifVv)eyo1i@;w*LKP{*hP!W_QDs&_4 zlUh*N1E_@-zy%lM)fLYwZ<(q^UoH##67JEKJ2J6~_9%d+%+W~a__=Sw-6 zwL4aBf4TT0DXUySDp7STyi_yLB}J3AAc`(V9m1PUN&BQTk~i!%3MO6ceJYclf$_`zFWCQhfjBQSbpKp z8RXB4U{1@lEcxTCd^z$W=x{sDq|1Z{CL8&aDKqEmFrWXlV<5l!?Vpp87;3L?B<9@P zTv#&5GO6jU&ZJ}CIE=*0mmm=gxoj{VI1f9q7X}OM8T$}KfUK-Xng2i#n&~!kVM9S= zk-4xwmxi0EBn>bZ7;#wyw^JLj>rf7M?Hln$NR`C2|FSi6(%jdBLR^twWqyOFGqO7K zYgHY@)Z{0*aw7NJ)l$_BX73Zhe2mZF(3x2AEAnRbYe zsV;k_x~R1j>cyXno{A;O)<&diKq}ijz*`;O&D*r4RoSs*&@T=iv9@6PbtT8YL!t0j)$|1V^D3)* zM=ut)x<~1BZ%Vp@ulJ>lyow@N74xGgIttkWM;*i#1g%f;0J;l4DD_bta}{!Ca~-9`%ek^N?QFLGBIG>0pnq0FoDKf-^=mtIFGUEec+=Yf#|)N9Gt$H3lzQ@18|Z zg4hqcT+6!M%e&imK^g6y9xTE0BAUXpmhN$cz>{id6SFrIdF{<^5WxyziNnl93+sYo z9v2cLcQ4(_`U(>Utp9wsUM&}A#r#HDcnTORgPeJSiD*n&@5a+7jXEW0ZEx=>E}T#@ zwg|SX5gR!ezpHr4Yit1xme{^QTt75c?Lk>%3xLOnJr9tv>OF+V7659*9spphQ{v{s z>K*G8s2BNFk=4LmnZS*(no?pl_yL1a?@_mU%r6QPwO(V{+l)OO1P0+Ky#z1TO+LIM z)hS>x_DL_7kxVqwUziqrPk0|yH#NrhLSRukjv_qetu{8VaIAr-imtqd6)eK}Mbt+C_Yh#fS~p@(pjO7ppRjJl z@ZB1*HdfxlV0H)JxZr6RX`Ap1QZa;eMXr?iahqmLSnC|5B-Gaisgr zZu5C8%zMoCfcZrz(grcobr01-H=^~OX6H13eC%ni%876S?Gu-tJue!|!j0JFtoN!d zWK}VF5<8D97$kArGBnmjX#6xiGwl5-SQ>Z__#Oqmv2KiwdV9*)lW|tah*49G9ZYDP`woxE*sv2BxnFne zV2XB(dymGtC3r0}7BU!bJU-*PH<0lXW-KJtvA3ld2@YY92Mdk(na5|0{sS4m0DSBq z48%rkB~uTPAh(x{J?SK7e1{&j{#`Ouy6$0Q+)9MY-#|hUk*~7AyFWl#G6G$U*IX{Z za29H2Xccm;Jf4g-Zv%eE@$jBs0e=1QaLFZK43{<61b z128T+zNDUK0iSt1-18dX^~b|QzXrVGc(~{HfcuY!xBdcf*YWU%eSm*>Je{GvfdB0T z@Yex<=6HBn58(fKJbe4hfUh_K{87Ne$HQAc1AO}N@TN6@*PHWwG~8cG2H_LQeoWV%Jlfg^d))^TmQCfU5zr<5&mUm z#HlY)%#MDUNkI~N_@~G`kMJUlL9)G{BTsq;Km+aXe(QlSPf6wjL}6DZ>#Sp=t7nw#q93(>37UJYa?faP5|VW^SR-HtMFxUR|#WEl^E93$CUq z+>Ae5OVo-JsjQpRe}MgmbQ{n!$|veAW&+YQV7kO*-BJ}>TfuDi%ATl%%fxV9qHvzzYHYGq zaQ&~Yx41sU9c_&&8fIGeZ;{9+z(<<^Fg80ctoD}g{zdurQQN~KxXG+Ha>zU~)L6xH zzwPgGDD;`Gvz_G!WNQHC77=;}TLJef*Zq2Pk`a55EIev7pQ+ZiK_i+Ud2syaeWQJk zE7AB>r}c9Jr4ZS=x1$&PtAGU#A}R0i5aL`iqy2rC^HtOJ6iVY#A>3h$e;z*&E;Ng{ zKEfGmBZf!66AS%#FTrBJHIXg>?(FkdZXl37(RSaypS=MTHxTB(<5VjtMOKiwIvfnN*iUfs z$uG8+5&Juvvu51_WaOS|FVm60%el|FrKK3=O6B&*!9@65PPBk|WOyXmSyM4a4jPPso$fQ9>y5SH zsKSL7_aJ)0lgf6NXR)}2_Ksk~$*69tJ@I&qb}-R8+pXyjI*2KW4OXs^#&i2BUkzut z*UBT3u=AbDokpS;wRG-A(|VlfWPboxgL0NBv4J*YZi_hW!Q8fU9)39HT+?njIeSC? z2r-%EMBDjB?q2%tJ~l^(fhF`C;W~f=25wM4SQ5Mt%nM`&!=KVvF$M*Dae}sNI7H9C zXh`&#vsk_(e3~-QDxTyxFDwPoq{AUB9<}00R#dO)T2NBcHv+j<0Eb7FV^iH{M(V^6XZSF&cE zCuJAUqHw`yo+H z>ri=DqGm&tGo{QzSTJA(EB%OaO zO#hNF?2pl?*yICIO`M*djU)r`90KAzf*!nZJy+a@C&*u)UW*iyt(U}OG`$#_a(eIr zT$o_JP1V2gT#$;s=`-RJ`bpYV2p`kn$4VL;Aa&(!Pjjws9sKmM#J#}=B98^@Sqa=? zg>exh()P%w$v8VV(m9@Xy!gv8A|LpLozP4Ex0976L%<&v+-GnS@TStGl_B`1hHpG z7q*5D&P>F9_wDN57y)KYtj-C))JN6|c~`L&8oUDFHlyV`AO-Cs$y7{|0LQ-c*8#VB zGuy0#B5#=y(VEf==<2l@P?-#$qrQeyXCInh1e)Jb;IOFN63_yv%bt>XInfxLxcMBs z)2aQjGqx>U8oleN!|II;X@zALttxbc51Q$M==iL&Wk|HfRZ$(6V+mP5cEF0}{ z;*4%&3x}0UH^3F)h;>DVBBQY$iz8j(&yWBt@t1FFX>?rx0xl4-w~kmvc)8HRT5V16 zYt}@%RxZY3G7pkn+A`5o-j*5KO3t#y!lzYwmqk8lsTn#PAh`4d8rj2T)x+mTb|SC8 zGs^oN980%SxU^3W*3usX_F+~Oj7czsaDWg$1VF#_3hNcfC(o<-;j`k_XgRBZ1B20p zbHSim2Y^`G`xV*OxdE%Bj!`d|?>iHBVh{Mv_lM4No7tiz{>%cqe=R*s7jk%v`Ehak z`^AWBZdBDx*8cXx*wNUPsB>DEH??@oo5Rk?->hzQ1Xt=#?7zk^>C#yv&m(=J!D&ru zVpn6rC#-IuOI?L@8t0P7!QW!@<0A8eB5NMb3VP_Iqs!ljkB5AixtllSJf3|TFB%15 z(8)jA(QCxm<;o9GzOWCMrtr~W#;T{-qxQA;xL9>HX;HXFHLjj+y6#5HR?nr5JOmW6 zHl<>C_T3tyR=42Yh;2pwq{%q`<N}MPJNDD%^K&D$En}VnL#Xlq1^ZZYoQzGQCW2(#uL4$_+wGfs3v)g_yGj0Pjd9X zny3HcQJ?JmfYcu?GFGAi9oA==({1`MGjsGCEB}*-zN8M@MKFA+8QgK*SBLiF1Y<3R zpD{?3`LEo3Z4^u7d@arMy43FrX*&BMXg+1Yu#*I^v4;dD0F*`r18h;I+K1{D2$+(&OdizW$VoqNh=m!u6_pfohe3 zwkvYJYL$sZSHiWrd6<3X+U#&uc0_QKg1$1QuZ;fkq~jn!PY*{mpId^TQSFHZMfq-c zYUW3IQTbQ&l7A+jXxu;`=m*O+=^vj_`5wCAb9id|J-Wswme5XvCtW8gLv@d9b2uO>VMk!va~? zgW@rJ9ICDh($R}+%xGU>zQ%bX99t`Yi3Awj19))j3ulo56??h@(dx;iVuEt&?0uT^ zm7uZtl%0nY^>G|FyKtP>x(Wx@jh0#-8 ztjVz7`kh3?$(9LT78+Tp?XQ}6sqx%1KCNx;$M##!7ehQ96R54_Tt2a);6y~ z+q`cjhem8|Q__4ZCQPN75lfGV8o#(tjn}K%oEm?fYW#|(7N2>GsPR;4{YO|Dk}Q#z zkdDGIS=2WZY_g!jV(S;(yswcQ$kHs65nk_+}QML#5koF2I3|DXUfU09L?Q1 zn$O2Mv{CJHGN1&4FO*~a3FpQiIh7u+GBYy%94Ts^43*vsHP*`tU|41&`!$7_2a~`* zW1s&&_M!%oH?sA(8vGG8$P}lxBMobCq-e=wdFnOoXi86gFLB3D91>WFO1?pTfha7nH%Cs{E;TC~=#% z@Mwz9Dp1v7UiGs~n9+uVW|Pnh;W}$nVZ2b45 zpK_@#jB`2>zEo`DctCe=7*q8~zkJd zK*3x`4=PietchV9#7g2IqnhZ6E`bFsXD@|^!e9)zO-1144YY7zo85-9RiFwA=cD5G zcZ&gRo^ExE!bz!#P4IU@^}q{8g)_AY3gQUO%A6`HlL`KalUg4Y zr*1$RjdaOlIezHcHmR#PVkF1uF?gJe!5BZT;`ouPq4jE-*QD6uXWu_5`-8Xzu|df} z8{2sUC4`wMk16Y`lF$&GF|k2P`NSZ&@?JdQRnyldJ(F{@j8%`(n8jsj7pvR6(M6>t zj>xEl`!RLZ0*+e=WCG{0;qlRW^otKM?043bmN;|uQQ|7uhD)86_@axdN*$4N6Q!Hf zeKe`j<1W*AH-M?Bb&|KL6icXimj_2s42Zf#VZWw^VwR8|4XCcRg}wSOd=p}`MLP#F zYXM>ZN&OK}$c`T|;}*zmAk=4iKLb}bvHVZc^erC8*d2CMZj2tPYQ?>O9(;khY;f{2 zca*AO~^u6B|Y~dn-FZ7Mj3VVPM>c6!GNv=)@gP9Lfnp z%HLA1pBtNNFgxpLKXOia_b40}=CWnYeyir*klv8#i@c6Ze#udhw|~S%!q!&eX_GxD zC`i@BLSo>Q8nL@b3^uq{l7Lm0(a(RxFn-+@YfCKL7x`xT-vNPnGu=93M(OZ(a-71M zMYgn{H$V0u2MaM)z64~s!ZA$ErA=SENGz63K!T~!x_z7(wGtD}l>acJ*+ z*SXKk*yhSkm@DsEokOp)&6OZJ;Jo|@lJ9`ma-@H~Z*l}v#gj8tpuYU6qW3`r0(pz~ zSd--m4EX4OZ{v0xyZ=3I%PYoxT;Ed@46+8+b#Bb+X{_+7HV9JyhvG1&Nc|U$TN=9d z_)e|qS0iEU%lrc>Yy``<$M+y^*+qWqNcvf1p%)#D=l1jxv;fXcO$QWj0bH(gd3^Vh zi8(bv%k76cce5iZp;B7)7l67-0z{ zTr~E#XqY<`+K&A%bGK~CD}}H%pO$EL@(?x6X{g>7*QIIBzL9bnQd-?=@*+&8;l9xF zK|QG&?~@5N8XDrkY>>QQl`ujUdqx|Zt0o%pKQJv49DGeIhxU)pf#RL!#ME*zE{!c( za%TE@)C2RoeCxyB!_*k|UL#w--_-cH)<5a*|3d4--23l$(fWcD{sz!ute-sBLh&iw z#8edPLc2#!W@}rYpvF(ay4Auj=Sc&gU%Y!ViG)=VNO!Uo8}Ea_<7!z-yz6dQzLg$r+g+i#_@Or~atd|0w;e|2uv4hu8-w z_5m;e6;D^QGL!WhX@1Tv%^W{~sPs1=2YNnITSEU;Pmxtyf(5eM^Y-dac9Flr0Zfe7 zdE|N}v?uki`C&bZnsGwSOZc%fzTcCZh{&lKTj^4_mI|WW6q3`*8Mfx7L0l7@DN46O z!#P2(WG=t4B7$xs_AOYC*fPBoS%G!XiFDcHl4P-NtE}YCEc7Pi82?8bEq_4-6hR3$ zR5URxeF+0${2uBzbQRw3xAGvH`Y_fvs7GxrYVPrvhY|NG;-o{=E{gQ@SCJd~smKc8 zK9Pz%a;%E9UK`*+$}7n!|6ED>Qt$MLnDlv&zC=lGM7o@k#C}fdN9! z#d{$rMFyfuM73jeczA1m{yfB36(zqQV_I)GyS3W*C0eDQ+R#Gw3+XB+njDVCFlR4b7|wsbhY1f_Jg1>MIXTp8*bpbE@lqr4 z2g*LGhe`bzN^~!JhTLCf$(s@T2dhdE9jMtwXnRoOe(r$VkTmBGsPEJ1t@$#=*Psg? zje;|AZ4asI7GNw2l0j-{&L4)g6COJAiPRz1h&Lfi`T_jNmhqCET2Gf8+>VT+)7*QN zv)@FcJ(JUDxcZ&`hQG6Ua{dO8dtF;nkms=x@j84zv`%W)G& z&-!ySV8lK_(wtDF-zO@WvTw&}qjWXq?I5BNM6moc52!IPU_bvN4Ee3#DR$M$BYHn2 z#iC4L1Hn|UY&WGHDY5h2AZogr>Z4By_lDtZhMMZ<(M}hpHF%w=rUr0W7N=D4GTYjM z9oRVkY2F!x8TV8XP}`W~{wr8yD}PIM^QyH6wJ1ZO4ovjBu{iXAE)b_q)xE3fPXjuf z$d-%i!15}4n@YW^g2|03!0J*AJY~qnsf6;cR`&`5`kd4~VV%Fi2C93+LT-ds-8=%w zN-k`CU^?)7jTZl4}LTc=$bCt;h3Cas2#2yVL!!C3xf-a8&TFS zS&-TJj`J;aAra5>5ed)rJ14!uX`L@K6J66*8kfNmY=2K?c2`;%PK-b1#JI&5*_~q( zCg)gLnu>X@5#u#t_N2H-EpbKKksN+-TvCb%paNozZOI=|DG%L)*N|NJQRu7Wsveju z%g9y-g$4jtCV&n)TDe*gEY)|dp!v{KyAY4Q?xoQP=OTX4=_?k$ME+RaoPqsbBfyr9 zUkWo$5njOEwij$XF)uuMUNq0M8#!~PjOXNwUg8P$@#VYL9$4GLm#!8M__ELkZhI`~ z70ncx8UTWw$V+nTJZ(9~Tn;h@Fy;?n3c%Sw0J*Pba|w9FDed!8DJY%bubc)fT;J+&E13_#{ zVWca^IXEonamovI6$WpOMx6sm^-!?avHc1i;Xx=O^GN@keH-cY)x7F#)l4@HZgc{k zTuRP}?CwvD^zY;?N$}J!8GOuu5efH+Z8usRFrm15SA?f@Vb~jeTg#BA*`I4Xjk!;Y z%N{LKCk z#J*lI#Y(py(p=rvGBmFpp!o(e^J6r$F!3CA20;^fS~Js#apJ?y(2>&;zk}Nn#6C+k zV6{6tcfP0T+Dp2y!D;7vT4(t)b2)6Bkg}`)Mam|BIc4Fo1E~5v#9MS!I?ipVwovyM znUjc%HB7(Gf${_?KH!F3NpUq=8NDjs^SDJyWB~%mEmDE>w>eShOF;*Ytm;E`I4Gv4 zfT8TafwT)L55CS$ey>(2ZdToVotXzy-IYq|nYGN4SBvkFcT|a)pXV5q?-AZ(dIbD_>F4t|P8`W*86suJ;3ZpI`YOM^Q2sn_hO*yY8erEP2Ea`?!!@=>|`0`E+plEsOuc+mYhc41a$zE z$Oiu}a^zEg0oLUTKn^H3PZ6>$`GvIy18|}mdIUz}e}FvtO1+rqo9Qydv=m#fgn5^V zm^JpYY4fQG+`*9WwkAWOVD(;?{kS|go36nj`~e&`*{e?cC3tf)1Tlv z$6RcG6?PeMoULwkrEl+3U#d@m8?m#PqEJn8rKun-#BprcCI3mKs%dX`3(MX8!7P@N^hY6JZ}Ze3KLwHEX_U;GK7VXWr{GCN$7^N~ z8Sw-zg&a=@2m2kk)BXVMuMT4@e{2y7Ri+2Om9@o&`7rV(YTfDzeV@=`UuI%uyLQ^^ z4;R1+(3H7ooh?T4=wgop_pc9jcH+8w9CA(Sn|RPYD+RArTYSeAxR%Xyvyd0=SgTYN zA#j0)0uT3jFlh1v5F$^sB=iCPMlvdUl?%k!ncFd>pgwsA^&L`p#>%xTeLgb&q!!Q0k;*Z?igUR`X}JnO?+U}batk{3;Tp99uE2V>k9 zdbz|1iIGhX{k|U}x2by-_C}9{qOhDTBh)yTzKZ-RS9q`~oAIe?9nUYJpj0jT87E7APH+DKL~0r5E8H9K zHs4lqvVvU!SGjNtv-F`%k&MS%Th8)tkq@JrqsZb24>7lvvQQi# z-$-Ku7ftdSwvD@W*om-R%I-v?V^BDZ1XM7%m~dbFJ1$&nZ!T9pMnNyAR zJCJTG;Mf#Z`Fm2iXp~w;`gnBuQR6B1#PI9J`d4tTDhACIH$rms%yg38&gD^*4#~_> zmS}KgmY45NPb4*i^`XK`kOW~0O8OtjK5)JYe(~F8*i{ogUp?MR{e%N?TuS~mg3)JX z(^_~~P6lv1c0uO9a}00;owaY{R-{aEw@rCgn2Ei1gLsIl@4`*X;P z6z``MmlDs*WBWT=w8NQd2b4S8Kg5SMMkcNs?tB~eu(2LF8T$xgE007z?u?TjR9FPB z1J#-PY z@&0@@X#+C7iV!H6{z|h4w1mH@8@W4m z0m$9>CO}x!JCk7!RS4g}3aw^Zyj;x}$!JaR=W_0a-La87sFC2mX@i(71ifQ000GHP z0A4!su~1dt#iE5?u*9mw>8amH+;k*FJ#NXbUk=7MpD;I2vLspFg+l~|aH2T309yn( zu-2UIPl}4{F}WV9LTdbzc<(EjrFLLken!8je*IH zdn8)fMwqPH-^qy-tJ}Re-{EnhPQ~hKUuTUs;H2S{itNBp;4a4uRclG(xq27;CXKED zd)tfbZ=T2=Dm{J=CD#nIVDN1Gi*5$m#fiqt3PAj?5wzaK1)!&4B{$%RgebV!nVH4Z z>NChSpcs1JwGJcg`ABQ5k3R||#`^p2#{;YvUY~>*$scY@O!XjXFHAS2*`UkYgSX6o z<@)2~^1ZTR;8*k+RM)F{9GcE6&+$)90S1!MIW1KN#7=B4t*`7|@_{YwMvS||awiz# zTfw)D+jK$0MF6SmDb@Xx#W*;co95!T7&`~?u)4K6xPn$@w@7GeoDOq}l8Q^Xyen0j z3!IODT1^yIx3RVh)^5rJ5cCj+gz_%l{pP@Xjn@>T@-xQ1f51~-d;ElO}yI*WW4mc5k93$c}$YD-f z^Ztms;&A!Kc8!ns`^$A*8(-9bD+suhITqFz7%SgGDE$Fnb>l@k@m;k^jk1n_?{93& zxN!uA7WlNv_OREy%j;b7k$IP|U^B4cvi^gacMf)v^vLP_URk(hV;f#jkN441>Ftnk z>^px?n&1jV&<4Uo?%il`|yu=9sUl(N{1&fyhMk;&G5W_@E;*8#9WVn zv3_+L2~gJt{kBKHjn{7({Z_%Zr&fQc-|o`<+L*-iJ?$oJde(VX_c7P6(%ZMfa=Y9GA zl4JX5p^^0v8m~`ZKq8;~3Nkw&iMjiLA=l_J#Q{LsbJ)*#{+HGWF5X$j^S`b(laFG@ zQa;@4TKMqv$iv$zNqjx>5b@>wQ*H(Bn@~=+p2v8B^O!@RD_dSb8T7gzgsxL@4rsha z50gB69$<*Mz;~Gu`xB$Ct1sWy8K)Q93Fkuyx8t6dGoxA^pig`d$q)vNY!3H0HMYMW-t+oMOY5*9#=v*JfB%SZKo64qh5_5kCG?q%*>jr}-+0^5;p34SUMI zVA;`USq+D(^TNZcns|*$5Vu6htQNi(BlZHQM8cridzrEP7Q9p@jTJZIX=X1oR?%oO z4-GMv^BW)LQ3Sq&0QD4Xg!m5`hG244;|C05UP1nD(iP|V@)DL#e>uH*`m?!Q6vFQA z7FUAzl=k3ji@44$jJ>I@5a(C#5D^^IKpezHH#bZ^rpJ)JHXB$9=FS21)|a??E|B}v=9gi+HU1gRNDGj;f@^aFAqQHiY}_S#1T0a)KipT zNnYZNd|-Vcx3{X(ZGuJSK(M|)CeuaAlla;x>T)J3jMwCNKL&H9-^?4SH^+8>?B|vzHNZ_=psL8+Y9FQ=WON;HMw4QS!^RTR^EobiLQHz za|?X2Fl})>?m+r`wD6dXq+_atUpRzx)5yIMvs%Tt45(J>1}>&O&Lk}h*xKLrC*0c- z{-3CeaaLv>ryb2_;2P!fuAA#uyQVo0Su4a0=MLljk&L~+H}WmjN~13sWl!Q?GRhf) z4spW3KWz|Nt(;hxa)Dy*+A@5p&ytfQ_{5ox$7j;4R-(X%@T^unT#=oNPU&H<=^^h=i+5I4go&|jA zx7q`Xm2UH?h0|zp`gc#E*Y`{^tn$FhC68lYyl(-NZD*`yB5 zbCm!iESEU~z{ix%Ew7za#Q?I!r z5yB5df$M)~inivnz*jQa+OmPZ46In-*SK zWvZcMNK3N5X+huE&~JafmPeZ2Pb@&0Y64{tD~<>ocgI;CWU(pd8;`AG8resUp)GIh zl%hO`D)TZ7HGaJbk1Cl=Y)6#Ch;6~Ik_%IGkwO^kQ+6Cc=n@7YLYu;IQ?uDu z0I>03Tf!AWqq=b6uer!3oEQa5uCDh^aHnOVt~>PsngC_D$po2t3?u0oId@PPpDU2Q zXimTqTo*^7JcE$b=Em_1A}7+^DWmjli^4Rs)#en)jvh-{+QZh>>kVY4EBznH4#FmC z`sfczUk}hg|D^PG+-0EV;nPy>y*|$F+2x}P&*vwo{QAT7O0l=&7H?dJZLDpt++vvL z1CXdXrLxypR?A@N>6IyCnG)!IV#i#+3CuIRd zGFI1QuGHg&Na9x+8}hw@erTWZ=NCeux%4Ji@K9p`A{z@s#@bJewU-C1c_Hianq0Td z6NnlKftU9YNYFq6FUk|hI8C5rtUewgm?j7hAIjI5pn(YAM5LybaT=jyJOM&>Z?f>W zeFzB}h;T(7A>%Yc$yi+@$|zsoK{mE)`>+u-5Zkx%*chj=Nk(AX2*HNGJJ-N;Gm*NX zefS6(i0`A`Ty+_z@kvJD;|H1h;d9&gHX(~GFa!<6_fQ@m<1{|W2z+M@#D`sFLf_4O z_y`(^@5($r#%X+#5%^w&rt3#vv5oJ{K70fX#CP;yuD*=Z_#`9n-8B&3NjAPeBa2;M zf(GLIeI6g`qdW~CJMd_`|uGo z5Z|yoKE`Q$k`efRG7ulGR}_4^akq(GUxEhWdk&GhdoWJplZ?RkP2kH*pZE|VeThD7 z1P#R2l*h(6jZHEF8*gdLW0Ub4*e>hCM$kZP=jE|6PGggd!1fTG?J}z8){p1nyc4dK zl9M>4s#aD#1I!2ANaZBcF)O|RVJNbaq{DNMI2=N&#NiOdqce0eR+ixQo225@kz?X+ z{Dv>!bOzHN%so)HrocC?oQwg11EK0+QQ`yeH5U2Z%<^LN&T+$oD6_O}l?Df>O z^b1QOo#BpGj>j+hx<7sbGLI+YO?a-kocD0Haf%%e<6YI((D0CBh1bD#VZ?4Alyg;M zWg~-fzMkP%XSKjh7s0A6 z(4@Fo`npEkLjvUZhwFXFZHA1MH$yL$AIOZsH_dTB74F8FKSn*vIE--hNlWr5Nsqy| zemlKV9n&gbw(b*KJFyN(U@B=t{f>>ARNUyVo08v_!MD<{sLwoRv!(8lIda}yzdF8+ z*H@sT^lOx_JfUI7eh05l(18BXC>!@X_wS8f%Z@<{__hWSiN8?{yScCYxUcZu$J^)4)lG z4L393TlGODVhr545=)9jfxgVyIeYpBw{8Pt?XFxAXE?WUE`jkJh4}gk>1^JSa9x61 zV*J+p5+gwe5b=XPGl?w%BGf2{8!>~%+FF@IP2UgoGjVIKjJ`CrHTbm9lNPL!N=fp9 z=0Sfn6W1XLb{l9+r%1BD9gk_^lSsB5$z)2F`NYZnvH@r3#5eHK$Zil57*ktsteD4U z)3UYpKIviHL7_9PM))$?@T0>fF85MN9iT1sR8b)@gcJ4C2o z0qF8|bgGFHhYG9BvymK-`Cgwl zxV6uJQSE{w`^@}s!1+Wly3pf@oQzX@Gm(|*;xah~OK{ z8B{|_vYI9!uF8;>)QIfKEHl~qKoflD)bPhw&-c;j7AwYxBBh-*k-}JC zH4^-E9_0p#{fP$MhqPIs5>&+0(s=DB3B2qvrFV529iC26wyAClwpUTfj!m9Iv+6W#;Y zCS0w|n{PjDFYqIuA?Uao5K;$m!UZmJJ*3$?Gkhj?WWZ6*A-@nK{;4EF=BfaiM{%>< zgMcKwPpI)&RUy~)!9Ep!VjAw5xet04oy5Ot!#VNHRnXgJ$JYC9^D-eY<<)S@JS39i`$u<}_EN+}hqRU5U;6IZ6EogMso-;h3HGW!}7bWD@-{~(2 zf?H+A`f#uUQs7b5vw?upJmV{m%*jh9w#cRAv*D6tZZ65c=_G6>pm(Php{JT#gV$bf zx2NrY<>Ef@8|!h%E{B?AV($W1E^?)$#!?3YAQ3hd{fbDPCFsRHYR_jOup3%nHo$XV zj2q9)Lo=HTKJ73Ml`lC-;J-L{sAJvCQ7<^#I>_HC0-OYPa6Q5;KDEA_K5M_Rem@H5 zB9aG(QScdzbS2nDd_!{hGP^Xw%#K;Deg38})&a)@dbPTSsIzkj2Ns&ppprENa}oNo8tQbc zp$@TzI>Z_Z>!Ylp6e-SS9r_n)czG}}4z}h=*5&oa@;$(TI+u58d(VUQ1hZ{gGPF(# z3q7eHq!QG#5%6f^qw>Ybj(#koOL6~@z0GrznMpiT3G#i%7PYEJCWW(hohPW+g$rPY0?BBKZ zQJ+2ZrK(L`F4xa;`gn-u-i=a&+GP8~oyp$FByNhdhxU?mtSJGO1U zkz@%YKwujLD8y~41H~Z*cCi2>t=U~$H`i+`0TSrLi}TWkJkZz)AR7#}WgCf?h8Wy{ zfsi;MFIp6cfdf6yi{~o9~id z+@=LNooF@lt?ZAg@GItB(r)LY6Eq)9$xA!3`%S%5ifud1V0Y13vz$P-;o=~s$afG# z$}F3;WgVfOnV5yA#*f}4@^H=?c2_Dk8`@?sdMR8M=>qdZuE`8!ccl>OZV@t_%qiqZ z^>mazq{`AsyatSM8rD;UN1iZNGd{h^{f!tT^5HL)5HZm{{>x}k8^;Wg#&^XHV!L~} z6XysyjB>Q`zfLpx|DSUBW%xNPt9e(ED#LxzuERo66+Uv(|66^1SQhfT$|+bWYv3z< zY&AGdyYyPN;ZBvAyOA&}trvYPjr;>Sc7 zv<@4NdDH`>9Zq&2yeQXjauFd@ndGH}3^tRO6}~PZWSX5^T1Xeq$2F#HEBb7kG~(!( zej9miw?YYa{a%U{j72^$vJa zl982o%e2kL#>jq`NCLnLo2k;iRVno_*CUxnwS8EY)!1NDHrmK$o3hQmwcEEY`?koY zEEceg37}SNRvv6d7GwxwoOoA~JRHw19Fx%C^X66!H`N)KP4#-XO|{<25GjM(+@=OQ z$4uxy-KSXpaSd`XLgw`^a=pjbp$kg8i0~mU63sQdN zcG&%V_B_rK&g0y#`eo;Gx`W%iHGeG(a2I5k-7NFuU}JgovRJ*7lKrZ8cAb|}HHqw+ z@i^O5!%pj%zu$-NS)^)vyv8g*%6MInjeOH=TXuwkH!6Sdz>J<+_w2ev^DIx0Zfx*w zXy+#HnwjI&zH_uxW!!7ZXx>tW;jhdiYN8`LrVzWKy>~CGxlYey1xm~WoOBNe@XoGf zcFoL!XidF!bMs~F&*^=>u`7PIN9(~w9I}{VQ+RX3GH)J2xixoJYB+TJ{>_rFz4K8@ zoxjsr|G2YWM~XvHul3!Lt5t(5+Ix4Jym8`dHNWIZnC*BfFvCp)eWb1}o|sm287==^$v@6C71-pM=P zAlgGZQI1R6dtXsG?$_&ZuGWqRf|VNZY7mP{b#=9OK|R#QTZq^)zgeuRYG@M|ynoyD z;yLxfXJSt|=M1{7^mTN`qpQx8#%3mWL#t{G3xcr5k{XYMcD z-9U|c-(Ia!{SxIKz!qtVE3^W-4UL}{VnoGSYvc7)tCLzsgFzt9Xsx9s!9mju3Mh~L z%t>qUYcRJ;>f%E88N>|Ee9a;qBsCg6N8sin@YmAOb% zYhDfpVs{z39@6QZE8Ba2oD-8hZ2YyOyt_02suo$pbbnTFq>EGnEw(xd*KC>tJ<36@ zALBOPP*}3NOkEyLBp_@UUhR6mU^oA4Pb;J7F@K1j86sa8vjsMYC4cb<@VI?{PZ<4BR8M6P~xr)l!&pu9jNoA`!bczhLV`N zK=;0Qz`0(@yzUTUJ;hY^{9Cs9Yf=>WH(J(aL;p@&&6W)Ze)g8|sV*CO&5x_+ocmri zqk#e{6xq)Jmcp&Z^PAWDzUK8Bp~OcadDS+^q81t|!`X(kuN)~1?xVl>S~cHqx zSP37IeYQ&!?P28scp%nv9tji=Kq z)#(7J@IpRKMfuWfKq}TOzp%)no8z6qJ?I*n(RGER=JZeX%-2LOAuqH(xCalz<=KW> z3Rg9PPsYX)Z)u3uM0;NXWI4Cp10)#Sb^Ctq90kW^%!84>)5kdrjm%0_NTsKkx8~1E z^?N9Gn;Pz{z0&lwy$sjR+{OMvm8a6{26do{Ym9Rb)u1}!II!RT&;b`{Ei3Tp=aMN9ek%GHljw$^L|w-6fFTV zJs2vBZ7{9>cFMo=)}I(BjgJO0E%4fCe_LfXG|f1uQlECX+*k}sEcNe4jyaWcGRyxK z^6AW8^lo;^O(A-6pC$Zy^~d4u-zz9KKbbnbZ|wntS3J3a^Jkh^RtyFj&2EgG_^-JJ z(UuY42|+S8jOYtjt09ULwTDvd7~`D>yw#_2AwJZJf5|)?!2luwiEX;()Nw-+XuRGs zXJ97Sat1!)4B+LhM0^n;40j@*cLsWc1ldx&Y`l~x{v*NnoPk*IFM3>G5`0&AoJ zVqPD7i;I_orRZ(>j|ATWwa)r3HWY?}P)e10&KbD2BzP!WccoXuH`Kn_JH8M|a%k+G z@;-bJkivb6DpzOcmAF4A5aAdMv1*N67vRp`Nox>s@awYx{bv+Ec!&)^9Z1jBvn|f`I&;zxw4h_>fp4I$E_^;r< zlAaNFkI*vh?^Zhl7r>%UgJyWl<^PL8E(QN`5Mqs%@KaN!q7&o6;oyGqM1sEtx27L% z39&Xa@Q2G1RM{Nr*wAy$#y?|QY& zXU@RK-2>ntXxy`c4H)EkT1Qm`xuktc@EK>|{9v}Blm-Q#DaE!D+>~V(1}z@LILsui zr26V?x+0IT7EN{LfV5G297OhQh`QnEXc_#AP^A$SkRCK^=!$Y@U`Y`A>?$qs!qFht zY@Iygjo>Ii%AEDDyH6Xcia?rXoILQirkq3C6QTZ$^}hD0L6C^NU!J&|)|Cqi)WN?d z@@O`EA($@%5!KL36(pn`^O}&ee%Fja8R^j5M++#as&vV_#GU3sj~lVL*31N0C(w+0 z-zP8BKzNcD+BL@`Vj47?)MR_%{CY|LknL4IODUaNh+oCa(63o{yyIt(2mq!*jz+HygmZ zLoM}KCo-2ttmJ9y5)w}p*f2y{V@etaCiX>PVyg42&YLBkyMtDI*W&hZ5>+|3G)F%d z@1qQv3G9kr;u;C1lFe135})To6?B~dO}3S}50f1F_AwFv z7&$-B!AeuWKly#Y!}NiCS~nPqqOf%Xe$}jTaVZOoj}$7j4C*7zqK#DOeo^8kDRP2d zf0{?n38*l6VyR__Z20tYm9WF>D<{@VR`8q31!MEdu0GLgY@eLUJw3wx@m^#2{n17A zUD(g#$PF^W{VLYK-@LF28lG#G_o%e|!g4<1z;p)P`3B zCy0cS-8CXDZ>i&c?rT=e---x7a-?@du5E8DoaQ zlD}SqJ*0DNPR2iS)}X6G77*3oWOhT!K1R74zS~RQW^onrG3YkP{vF%I>A-0Z=DtdL z{2^)7QcedRSb4O&E#VbAMO!nsnZZO_W{%QOV-0}f@NZ^^;Mova2U@Z`E%hzPQV|5fS!AD}x>AbYr zM^l|- zx{|T=Q0ldk+*L#mL5tnN#gC4Mau@NMU;lSOx$`5bgR&kFM>J+B6zuODvOH&@*I4N` zY5mpcHCDMzk|qg7-6l!+gsR;p&HseDun4xHMQ&5G2_>t9PNNC3?@{wEeW#imkyCBu zO_~_9`D7tf^I3dlWcsi3Nw(2!x2a9vodLte`ph<%$*}sKem>)<;zFJ=FWM^Y&+2UApA`m~(J6`FT zqCTs#*>O8w)bke=X;eUz_wXJ7vAN;WzuxK}iFk5Pv+D5e-^_-lh`!FVMnv_gv5S0z zym+N|{P5`&7m)?5AFINtQKesl6^9=-X9L?$8W?e(Mf9yBz2JEfWH-vnyUHbQKJWU08+0PMqa+SeyFK2Fw`_B;Lfjg z=hqE4X=);(EjZM42LJQO(k|vS)YO4J&H@eE;ikAv)Jg1x{9i;=i!r{JYNmf%CXcbG$V%C3WcZ{`eKPDOBFQ zzS6zAiZ)$ErsBDNQaf^|QqBKa^Hpc#-;6q%#_t!+KJaOx0|om=`W-y|RAJL+#KOr0WsrhR#RI{{@pjchS1*&*?W*hB^f5}!P**!fFAIXnUNp&ON#Ooxm?O4p8XNSxMWb_HYJQ6VQb|i0T z3~;)nFh3NmY)995O^aep-B*9uo+?$z*iQRU(0jwATYOZOkG`by`?}n;d_{NUKUCS1 ze9>7I9&YL;N+V65EIjRvIq9_Cuj$U-&^`JkdmQ&TcWKD&C^HS^iV1%ai- zgtEd^$ZP73?Th~%%dh#1Vs9?nTwK|SFo#+t$NTkA(eYzB5%Uz&gf;U>-Y|#b6-Pa- zGMXX=bECiW#qCG53NP}X5}7T25&zumr}Su?ZJK)|A_c{)JI%fJ_?xCAZeKv}Kz*YWxdSd*aqjk=Z}v!x4>R zy)(Oo=Vz`t*LK!1Zrem>vGgnSRwWQL%C!E?qKPr<-vz7*7UZ|pD}znlsh!mq=jqcB zl+Z#h@f=3LI0Q!$k!i90E)`Ti{r44Ibc71tFXIwt{rwWCXR&r%c8Zr;M_B3@Ti4Kd zN0=R{ZSkXm*L1tw5*l%L$wE4>kCCiE%JK5i$3C#W5%wmP=`jBX@E6JawVs@Tc0^Vj z6xk$j7h$Z^oU>o_`ZeJuuV*-;Dp(%d?VR(XdzWg!CXgzq)u!E;OS%Kh{Ko>60 zu`7_gw}{an|9AZ4A7<|o=IW0y-Z`z#r&!bS-cOnRpFCMk4*`Pd`wT z&u0h~7|PufL(lLGl{&iJ3X1;k`M$r=&I;W5Li8tirMPBu=d(c)bdQ%N)H)ocVY=52 zFNm_tISD|hPq56H9~%AHr1h}wgEcTKz1udZSDV6Iu57OT=$Sq`pV#0vdkIKWxVIVY z6WiTqmS6WrZ{;ndp2_7hPWmpuGsXsgTQ==r_PVmnxI4d$OOKttZTip@b`MOz=y}Au zri{99TM-Atu|`k*vDa&Ow6O}yMijt(3!=xkhXxOo@e)>`e8xU^`|jV)ibUBKX$m`Q z*9azW*Mw(0$u(s2**E$IQSuRgOloiPZ{T@-Xsj6vDYJ4N9Gm*(9r&QsO^4=`h&vpg zMiXTHi*kA^#o?)Uv!dwb>B0;#2>;&AN#fj&Dh1Of81_waL z9@^->3Qe35*%&i*h=0l~8zaa?i0A&Y@oFt>d~T&tf`nvi8QI8c(t^G50bA3;vND!Z zm7TT5vxhMpp`6Tdl+E(0BJ=E~{@<><{NZ(b*In+kaAzKVGHnxkzpn3I>RmN-j$OVK z?j_tuhq-g=@{7uT?_PuL*BCgPg+i@~hYY4c@QoH#1p(Covr5`c*oHhZ{-i zWd4cQ{4!2Hu>LR0xZ#!v*#g5YQ9b-BIhn00#+ckd_+7RF6{Z3w>r1`@-KxNBVoU{~ zdMeP#Z@vQNAmuYg3-$K)lF2G4e;p|u!DFG={k8{x!-z8~K-yd0oiTZ>#e%T&f$ z8|>8RnRnstsRPG4Yd%Yw-0QqSP!Ns`6D=PJ_!%NK);m41|Zvf0Z8% zIe7xM`hK`arp6#uxR)QbwRODu$j?j{E!`P%yZ!$5{s5AmC))nDry2ts4}*1d0&xTHv7 zs&}jR_<#ZPx^i#s2P`%yZQj`xth(6XUemorotQ80p`!BcAnd*&{j9jiVfxuW*urEG z&fvJ&4vwjCBt$E4WEj@zmSGh(gbc$vy}+=HJY}YL$yd1tL?{LQFMOyZcO3B0mmTD=6hwf?xAdGg?CAPX{V0h$*Q;++td;F z#gQ;aFf<~Y$?RPc8J=r6B7mcdIdhsZT}y=}WfF-cso?2`9`=NQ$wT63HHQgGySssS zaOB~)1u_2N+->B6UzE)es-vXYUTh{PqOsn|%u z0Fi3{2J&X-9>;Dhs|t6==!fv$JuSz`qSLw?Ug);PZg{SC1!B!uvq;sph8 zD{*BBC>i{10*1f0GG7fG;K)EWUMf3<2HG?-@~=d&skS3NgN(J_()!d;WV9Uk!IxIN z6G$RVf14@6B)#4wP5i+bSZ$Vu2KMf~?%*>Au&Z6IwVpn`#MA%u%vfv(U>oqaMvKfmnmM+f_{u$8E721vtU0|dFlA0S0#2)O&^$SoGU zG0)B|1C~2x=I@c0#!T;X7hYZN49G-v=OFc@x^E@kTwS}k->w(z{^b%lqM0PT`wb1~ z8u+>J+xW$Pzi-x9Uoj*`YDFjdI82m!7&q)apT?Y8PIdRcp|;DT>7xN>Bla_krx{ae zlfUrPEXB+3+{uk!o_NQLhY$2f1yUN-JNo(*rXGzC47(pZ*dmwzoFZoCI>Tw|MZVon=b z)KC1_+{xl(-&73zc+bdG5@8qW^JBD4;>T|?vw{tJo)o|51^zXh_`2oA*sXD;;IDmt zJT~%}62EHs@vGv;&{34Tmj5iiti+ES7SlXPTPwZDk1YCk@8z{BX6nNU_;a1Lv!R4Z zBx(BNtETjL8idqL@Sak`dq#?QPei<@)N-3WBQs4dC#`jDo*yN+ye&_zlN3aNX78+= zq=%KiXXFg#8hsW;wiX!I5%|w{iujMLb*c*e{eimperHWYutWiz!Z8BDst#fh0dzB4m3NC_ zTM`5QS%ebJ*8Qj;5L81}V+aG|uN%7evP@!QBX98LPhvH6!`R4P^O;HP)09)~Ph!Uw zX0W(L{Mg7Qlg`XwpVxFXX$HITMly5S&#-*WPA{9;X>8;saxpt;vCQoB9wda1<^1gQ zww;}#{_Lcyx_$gi^}7?q*>z}x*=hp&N9s=Q8(IDNqNx+}D`-kHYtM&4Q*>hD%<23b z>oFUdpM1_F5=?xNiHwX@A_?ORzAzt6=>J31s7%~fHKQl&>ISWzVF<&4y}Q?4j{dZ{ zzn*U->hIQ5vhTt2#K;i4!-2q6zQoT~i`1oVo%rZuGpE;-d`Db=+I1k)e_e3T%-ap`4TKtS^7Y2z7prMdsk|* z73<3mKi>dWLWqZ`CcU;Q_h_#JXVn#_bcEdL*1xT_w~~?YC75;SG~46?VaVEqz;bZ= zi6w#AD%d|wr|lir=QZfR?9B!s*xx1^MRx+bb?nzv&%mla2ui{O@Nao#vO_` z;h0RCWT1h)&`1ZLaEJ)|D^tNU%qt4DO81&7_XfPzOmUk+hKSwc;r+%Ghj!LN8|+F# zf9gT@oXu{y;sb8j=oX`+w_dPGO;D?i;WDj0r74t%(R3B{2TUdW;41`~?x*@Y2}Vt6 znk-x)mX@2XPtCVv_4h9fRZU>59}uyz`1dFB3SFZ&7x&i$eOA!kPl!$93ZUcnGPwzF zGmr8Oe^__9+Y#|e&d_nCS_rOqSUQFpMz8EMsEJF@Zo~`%J@azl!p~L z%uW#xOkvzocYYKtZ=pNH1}aoJhJX2J+G{n{){bwX+WNxfq3({HEHM0KoAEze+<(^3 z>}b~4FVoMW=ONCJ8vXs@^j^ScDHXUu6_`A&K&ye(Y=rygRKckgxAOZH{`u`Lto9KF zx$tROMb9U=wc`+On@23ZNgV8fpx_U`%x6wb~yILru|uMg-0f zxQB`MpQ82~n%j`ykF@o{Xpd1%FE{!Gw{*l1Tvbkw@?GXFlDzV}yj7GFiP9E~0WL7C zA76`4dwo^aq>imr$HFu?b!K|qkjf-tovY$UQ{*qgw+0p_)6nRtXfM9#%~b`P84XEW zxqkCFQsufsxLvkgFuC0ZM&c3wmbOWQMrgs5ZS?L*+ZX+*O|^_->|NLKkiBcA1~r-` zwHjL&J+ODxhMX*2`;xqSNv-eMQI*MSaYAfib{K=#!y{?9FRzH6hm(S$ztQAO+~gR> zIZ2+8?sKWvuc~?XsAilspf$#T9a+5;!}gE01NuqCTS*|mD;f~aY+GzF`)i% z)~HAbR@8u1A42z17!em*8%?u!eZ6;HgZs|lD^scd8D9GXjXE45%g=gzZP%huh-NFl z8GKrY-b9zBC$I*n$W~6pWb{dGhwjOKLnXKiGL?zfFz{x#uPX5ibO&5GVC_VPaiivF6 zCp6XMf|#yN8f<1}JF-5@+-WaLprCqSEb?v>O+pbX)8vfJUB0|L@hNXjpI%JAEc=AF z(i9=eXJ&g2JxPA*T;%mBp@D--4^hRo1=*Z{)tUtBQ>ThpZITQM^$s5iHBu*M`4KIBSmYq`X=`ZD<&hX{b_^&)q z5-8T7|LHATs%^Pn@``lorA!}dSya)p$!qL@*ZyR2sy-0EcX6t_BoO}r4{R6iYpMCk5}5$??rTxL1~?h~;kUQg zDk9c~9AIWMXYFT|$VXVekdc3}l}{x_l)(Z!tPuy_?yg7@>#V$j^zP#$SyVNtolAS8$D4}iM8C5^B1qB-t>SDjJAk> z)cgEHwXKh}G&pN7rH(n7^U$I;FDX5OcW%|--l+mjnpYdBH9Ykce`%|sA^x|nO0Ow2V_f5+`kDmfipq=y{^X_*xi z;x?$eIgT}}-&-qC$?LEunZ=zjANAIE^UmCVw|XBf$}QW1dtzq(TlN{3NqD*x*Xxf0 zR_k)_JLP-w?&_!pMK&_c2hC*CC|T7^Qck**&jB$(^x}x<%5C;r4jAKlCt=iA#-Dlu<^Owp2LpHRX zZ_<0$dz~H5#!_eFnI+D~`Q^^WYpR@$H+;z1c(IQD*ZL)R|H}-8u6q@E8IhM#tXFw2 zZ;N1v`JeImoA%hWE?(SCL4l|0} zw`^GR1r5P9L=wFIfH!wcB$$rgLU`~u+?8fu@6adR&%~#7glSGS^T6OAbPqZhP7+5m zyFsyP=-v`l=eqXtboY_yZM;e0nvQNDlwbcTLwhvtF=vsvD-ljUVp_oUB?&2=ySyLz*9ANqd1~6K;n~5nj;F?Q zHP23-4Lqx}_81qzP{2(K{=|Y~H#!^+6CB^VHbKjQ?Me7wf0{coTX-sLn8GW-lr+@8BZ_Z3*C(#TWHM8jQ7q#@_16JZ3o z8f;b!eyqIO09WgP6c+fJ4RL#_X4TqS-=$x&o&teVGaP6fm0G84(Vz8Ls`}g04_;5y zyGvB6X;sE!oae;6^88S8i!p4;)-*cJBi?xtE)D<^+NZ}sLbVI`3f+Q7_h!~!O&jc& zor-<^W=@y46RT89jB_;0?{pF>Uq7TKmpVR6LR$M!8^a^k6Yb3)W7W80scmh;t)WG# zv0dD77%Y`{fIxrGwJIeh_X0qGp&4V|LzzG5w%=SOrF|~R#a)RvyfsGHe!}dLu(KWN zFt`YB+b3L<3m19l2EX@U!?yV0z)^{qwa7_)vef7L7u(EWl)yZ-F#XT-WwNpU}X6&?ioO>eJ@H`j1Mw zJq)UMcKO3eN$FRXc|8(aDjrH6bJn;!S36FXroHad&{xHZ!5k(n7_+($+$x8=?ypwt z_}*iF%y$%X`J12P8h7`Be*5x=9~#1}Trm_#YEC!Npnb(bUIU3ArTlfMzaLx!K{R?d z84O(1<^As(P{I7m7DpM6h}RkBQQ>v6rxziV-=1%?s;KDxJ=C|Finb#`SHl!Lf==IN z3SvJ<5`G+t3wR+-%wnd^(s-FS#B;rs*|&1us=cu0Y&om{+RSa_*P?&06x!2%06yF+ zOYz;#na8>*tXDuS2_jx(vsW1nzRF3+kMLgAckX*04$7%$srfQ^uspl`qsU&769H7w zckUrCve72*J9m5*#U;K2qs6w?RNZZ*Px2T#%%0qiZ`CyF^;?SR@-C`yLsCTeUc1T+ zKGZfjH3F4(=ystt*hi4pQCYmV3c~Q@q@wx5+6=?aIkAhjl&LLs!Ryvqy(>meJ1BJ<-n?^T@pPEeab&jn0l3~ zKaPQr)E_VT{Q;Js)iNJZyqP{ZbLO)X@-S|KDo><+Dj<~YIw`4cat2;k;DE=uv~EOaC~`!bY;1d1J&Q0;}v zP1Rc|pPIg( zr>05vncAz@B1X?`%^MP{i|UZ_6! zCR+?A26woX_%om?cpw_@`$+If)n^}j=CP*}PlB&7jzmIup$LyB9?VxOZ{Gq$*wqrY z^1Fqvs%)Jp+uaAo%t(y}Ls4K<2fM!jrZVGDtjC8?ZTzHc<*Cj9{ttqwZKZf&>uWpI z*Y+M)hrXJ^V~Mg{_p?;q5m?^-Ui!=C59FUPPVrB!6!rOM70nmFXt(rPZTe9{cn9=Z zLm>;G&%fm9vyG8gUCck*ChF)IqsZ zV5L*VUY&s&JuAHM`mH($8hl~K&)owaj++L;4j-a@^WOEs8wpjF`bh>4lpmg|5=weV z*-I-o&Uk^rMDAng*oY;qQlGTM&@$I(>Z=ibRSUB;+CA0`fLb#E%=~xwew{3V4X^1M zhO#I}QjVJ1$WvsfRh`&pJx`HA9lOg&J`s;=ady`1@b|N5gumrk2?#)0(G2}ZxpzTz z>fllCDlvC=$8ca<=)0G569LKaJ>JjOWU80Sr%z(iHJhQws1ANcZ&jFF%v~p>4wkU` z)h??FD12|N;Xs*_c8N=k0p(bdbEeEmKSE4w7x$s1zem*MjLF`4fy9|!>!oh%WtP%+ zP>0e)a&&D!0ZiP5$<$VrZM|;Czs=^I;g4Qxl;zgiex?!UYXGFI%E`)xYzr|(Xc3EbyD%I^VW=Ro2Yxg{#O6)y;v<|}oPt>8XY@N8Ak z_Jxy?S!iyG{n{~(3S7=km8JJL zgZZ_?*nI$>Ger_UI=uO?G#xckIKV`N6~aHVUYvalb` zt?A4T^b22rfZVw?PI?R|W}JSH0C-F<=Q*h*Gu0Afv_kz^eQ9n$WS1_!GKL?-wLcIQ z_{*Z%N3$B@_F7eTt;FKlWok(J4%Pc8^X->vQ%JFyC)M}Vz5lq0y60Nd;~F2c%aI_Q z^pghG^MVyJ5kD|EFu_*AI!=9=k;i+%YP`4zmUd)jhZzZUo^l;~tb*?f))d8N+WcHg z&nU{JBPi;hDX3mKb0Iv3O;DP?*;2@2YFZ)i?bM<(fh;{?*xXL(ah^ zh+7q`T~d^zQ#p>pI><@?L2WsjV7zMfv}ww5ub-ppLq$10?H3$4p(t{?ADR5;qR4ms z?7O~F6e&H3YOyX_6!|QXrq3Ij#aPlSRN!2b5e` z1jzLx`@=<%aX)hJ?4ro8d*cA(GZf7fV5+I%R&#%~ScJ{@)RrD`&K~m2?P6IP@0(uZ3qyOZhiht9O zTvS^Wx!jNJIJzkEtA1qFSw)fO`H{6>D~g<*Pg#tiYCm$(f})hi`;mL66h$6FO{02l zYc7h+`H{6BDT@40KXTpTqR6d&Wbz-2BLBA^SzcZgd22r9$BQC$ABjq@?I?=8!jIfr zOfu*Dk^O<9lymYa4_b<2XyC_!$Rl&6+;lz_*7tGN_f|EtfNa!aLKo%zcqdWrO3fY! zO_i8hPG$0(Yi5uvpKyo%C12aJv{>6xbn;1R7x{akDwV0n@Sc5}9Bk;&O6-zo&zX6x z5G711I)8R;*lk%5zr$)}CeE$JzqPo(Sap-@70A5iqA>rt&tX(nqf7ND++)W^8NFAu?`Fnr=snT6qh74Tc)^kCeyObTa8f#;wRTsuKh{)`_X;=5VV@3ql2>@e(7<;Pssu?f1 zyLOL#GIVEh#`iCu6}r3kqoWNzzrlz~-{{EH-r%%-vC!Q&ej@Wkwl2{7`(gaXQWoc3 z|Nuce6UeKRq|sXduzf%&j&wk_ZiP z;wxoL_{@AvP!%iq6S4AG7i-U@7VQuvw3r5@Ay0F6CJO{d9qn~j>wIvSxkIn&XD72( zrE49wumTlrJ@zE{lEDqvMIrPg4c;uLh(HTuuaz#Yf*BW%nVVWs_r*bZl{)&pMH^gjlZzhD4G+`--NAbe(&Kn8dHNk`Yy>yt)WExr)Ux!DD!)s zlia|WXxvGQN;AjnmAehQ0o%<&YbEr4z z+u#kz6d@)~jAwl)v+>3+=dL0u_!tX~Gxjhf91RKg<-zwtsaG6a-qLBQ_Xzwe6-f;_ zqxWn6$P-{gfdH|U{~_B+BEarz=*MQ7-!{6@=bvn34i<7prWmquGF3!OkOxNO9meUqo7??L?6Ka(Ge+F!8OGyY z_}|6ZVM>jkIFMa_jCLs-*hZJ<(WTxwx}~AgJ;}X1{Hb6&rx6y#HmBczn% z%rLBpW*JB$U&mTV^QQ6G=VQVgR)cUS*~_+5;vy!g2)!cb(3g7V6rw#=$l)^We{f!~ zh@!DQGZbxHg|uocSI~e49mA;g&O|V!1sX&1%Vxfm+A0R58-Hqgt8&u(F^f6hfAX3# zXCq}Uo;F2t$=yoS^J!G2@jC;(FZ;6@?Wh^~A%}eFBz&bZh})y}qgy?S1RTZIy0yAj zmiozEQd`)LgZ2r&z#9ImrsJHS^u{j1dApmmCW)-Qva zV6<$pqw^$^7u-mcwi>BNyN#s4f^W?~`31|z%`>~l?lJbmPD?X~?SSk)GkU6yiw_Gy z23$#p^_cKytE1mF0H}wsH&(PD)j{ zx|XE_S5N9_w_EHI_2M7JKxOUsEx4)~ZwjrS z3_U3Rg7R7$-wo0>%lHuV&Mrc0v=cV%S<{QhmNCUeClfi9avVKod^$%qW_VxW_P~ z*Npti4J}4~oyNQg%&28X4{OM=U69X#{A%P1@9SmW1rh?sH39%o}J|E*O?%2+6uqQ@Xp{S2evsyVbNpJ7Lw5 zLLZ2x^;UNmU~~kl#=B&Zv*zF7rIHGs+kMD=Ln7w`R^)_=7fWrG7nb+Ysv2)&pFnKg zz%PEPmdneM{7WK8pCYN{UkK0G<24vj8bKN%+Rc69fcvu<@A(3>`;>F`%b2Vr1xJ$U z>a|7~W)3dxTHT?=WY8tB*!{Sf%zHa?KP0I?K7voh#+=pH3di9`HR#w&`v7tMQHkr~ zC5Y^X;u`MuInH9Y{l-Ag0?8h0-U5GW{qwuWb@Rg$-Xm)aTV`D%S!@Qk5)AGt$g{p2D04xd;sJ>(x4+iPH!RJw$L>xEcEgl z*ZY0Wf}5ix>P<#;D0Y`R-&rdKy88=oS?_M=V*{s(;GGy9*onH`y|T=mE1|W+JwJ?b zh3H>ivN2C{=V~B!xpS-X@(y%tr}QO7e02$+2i*oq?B1U(%Q5_E0fG?=2J6?v?6-gy zCv&zCw8P2G=9w25We{ywEL=c%tvPCqyNwmd;n;o_z|45a^qh5hWP1rp5GftLjoP0<9yT=fC?r{}k_%(jweKd`^EbPt! z*G8`1QYfMuwO&@q3NrQB$k=O!uiZYW?kAJb%GCdEOZf*%u{i;akhb0Aa?)R+X$A0e z3gB&`JN-nb7AI;p$avt>G{Ikw{m=O2f50QCtIscQdLO^^dEF$2>51FHw!|v)?2cE% zEPW1H#2O7(6gSl9ejhiq_QYa{T9H-W59_RA+|+m%!wv7Hav#7A|3SQMpEK})Q63m> zXspPKxM3yQ3{r6d=9JhzXZ5#C4zIz82ZwXR2gRS2>|H~c$i z&GVpYi%591J@~Zv;NQQG4_5eUiwa+DQ86oQ`C!9?+uDux0#;aMmxYy<51wVX)hocA z%&qJ!03XzSI)+=BcDwK6gMZKJ(1+N2f9lX_y&VSP1s@FYm!f`g*2xf!%VXOzO;p^T zfZMY}r}b>W&@oAbWq)*sfLdEdRF%x$vlZ+;jztHdo} z*ON!5b(h~|edQm4@3CwvVtxIuTGmoU!wMrt-t-L9>r`OKF&oV9XJU-z6{BV}!}N^X zmORrqbVQ~{`g05Ejd+(&zx)VH@9mte*-DT^yCyi85*IPOe0wI?D(W?jPo}6Rr3IL5Fu*KzA9Ej+E?G_o z^)1Q+;Vkkc3W^4I%?=RXW6b}kS;V+4(VPMw2R=%@5bEy_)QB<3$@#%^0DQ>7aG>c-$n-{K#Kv)K&kgD)|tBSBoQ zZh%7>$8heeX68b||Fk=ZcKVdn2C_R3U3&OqKn*_btxngInfqGanI1ne+3>MI;y+c~ z_Rz2nRE-mz$YmduME9^v(5#EO;TEPaClH@Ll+l+!_R(+hi_gGPyUi017jL^9w&k-e ze_@Be4TYh5kSITU`N0^Zr(^B>exUztxJM-C?2oDtv#dTJf5@w2?|OKSV5eXzBFt zUY>b&%dX?G4QhGX<=D(N^fi2$`F7@6-}!0ci=HPPm~ePLpN5+sjHvCJZLKfRHD4gw zcS&m?1W|$M}fZ%rK+cJ13HD&NkYT zAJ$m|-$|;ISpp@zuNA%9Jx_DFbWx)epKb8uwNJdp`-WK@uJ)wB_O9X<#0MMQrHj0) z;1CaXxEmzqC$H0aIxT!t#uBOQ5vsf!2~ z{H4z4#og) zucC~-Cl{45dY6(z-y{#^lM^8MKu|SWRGd2ZHStI?(D`I2&1WD$6MjPSs!7Set~=N$PmnDAOL(-e%qwvzkF*U`7tt;dveIWNuUi;D6GZLD!9hMkBi-z9Vj10Gwn?w?jytc?sgQTgkX{IU7 zwJD=;){O67p4{?; zs+KryxUoZl;l@V$kQoGT&GsQfMc&%%qsuwWsa z8bpvrFH=i)WBXJG!JAv8N}W~TAnau-_~fk5^zmTQ^T zRrT(5+I@()a~i!l_~viMox|JSoGSU}e3S5g_o_C954zV$uU=6KPfd*dSpP;c zZ)eXQ?>WW0RScLEmBHt->08BgvvnKM2Xh^FD7G)LKifP#=$b0~c%dtI+*t0JC~8oV z(@Llx0{AG$oOXM+*cxBmf&70q{XXkXHG26UeX9U$Ovt;ADAxpURnW`aqhCC8aHOin zN+-sq10yS&E_Vinc&FJBX{{drIE=S6wr9++x>xh~5s|V{RD>9oH9<*+RrUy~B7F z_0G~F0Mu8=>+2kQk(McuSmQLx%bISRQ%RqB7lwV(m{Vo@+xFI5!*e9U0zfh$k4F0t zMaT<7%Zu)X?Uq=~2SXlw3Rq{=+ycOMJ>{Ps`732_tQ7Mn!r(P`9&?m4FfH3F5q#4M zKJ}er@7AJy{xx1BT;p}lpT$_t~D4naA{z z_vnF0p^g@7G@^-_Z{cH3I!Y>M&2{|FUQ0ck^o`7F&YDk9-`P7%gk&^l%>dD}_nL^5 zg0iOPnq>0fM+DGf+*|d-DCSja4erq*bQ*EE*Kjvi@#5XPlUH|hl&~bL`*?#eQS^>Z z@eCZdC2DVVl5G80r@L^Mvp%J94SjHwuo4Fi8#H8ZznDSYveQf15pDCDBvmANKuNAO zNgnr(l>H*}?LTdH3%Zc+OMDw@`DJjpWsK@k${u`;IIFuvscN;bDeAlQ zU;PHJeg`<2-|3sVMoWxvqC36@DG$$;rw$_TQ#*}x2ZM{pj7g_<)4eMrLvyDGu{TM} z*OE<`>^_zrn8Q2WZwSPUO|ea{Cn6J`-vcx?9!z|5#SK-zq{Dirt+=65fgXF|>&bk_ zRhMEcJBAx?Q=YN1;tN&Ot9HTK6y;hlXYFSwGqcV1<*>mn5p=w|LLrQwA#jd$XfZl8 zI=kOn80HK)EA?d!o~O>l&3*fzYqDCDGB3C9l49wx&RN$)-J4CXW{p4hmNLuauYJf! z!p9eC(^3Xp?l`%Yk$|_CvkFK}n_VW9H9Ohz-lQ7kUSzK03Y?g^*u+^Qb7t3sb8ZP{l2AgNr7ASb0jLyeVA4k`Z$<7QD6#}DfxT=tKkB&o1(b~Ns}65 zck@?Nv-j)bpjwZne@8O90aXR@jFj{>Jaz3wH&3R}>3o;bIx)+M`M+L|u~}m@7Y7Rv z8+ijcZKtNjJ_$uZd#SNnCq2akDiXKZwlc~CM#Qyk4b01r=n7?@0jSj2KRW53@|GIw z#uV8EI-JZx28sot)$LaO91&e|sc+MX`nT%Grd!vRFADY&$ZaX4(~PrKKSzZ3?Ls=8 ze%Y#@Bc{8ukWQVkRX;~eH@A=u+`TUeQGwhi3rSQ{Bd}Xgfiv<=5VhpqVYy|S3NsCu zm4Ho`ETnUkZg(MFSn2e0#H!s}NT+OD^>f5@Dbmfphp$d%E5vE5fMtDPtA37{rK12^ z0=|**ZMt=5=9?t>Fjrkjr%Nt(yILv!)x3Qu+i=3*A4~N46=g9c=qPQAmj#|fG7kI@65bot|xjv<=wA>IGy{yl%gQ- z2UFWR-KGEGcJ7Kj$$3TJ|EXVYaGOeKJwnO$%V!H^gG|3{h17tX#IJlf*^smgBZua{ zzX|@QSNLR60k(Ze3IWMnI#d9Z6rcx>2*`Z;mjWQMDT@w;1n5t2HXo3VG6HDH5dit0 z&Mg4a$h3eI5}@x-0HXdD7oRu+sKUok0hq>w1*VXIonH*hApAKTs=2xkqZK|8W-|ZBs2H7BGbb?5~S}MUvT&^aUe#9|>CF z>xu%nV+xH_NZ@ueXB8+6|89mhI*tTR-rvmEzbSyTyjZnUNZ`^%;3AE3-9+tzM*>&) z`U*=p+gQtg1x_J>`&+=l1mG%y^AITyCl3G9T?HUk-WCueqXA?e6Ox*EMN{Q*0(14@ zV6JGYG9NB10I~C_fS3gxK<)*IJ(%X(-xU1g7F-BYnogHIY!XvHLt2SD>GX@)T|rTO#7Xiq()5jwg=<2 zU?NE-S`kPsYs7P)Dn|L5ptwFTwXMXxppJ^=J11W!zf}V}N#`Zi!<5_Xf2G`ZAFy|A z)WXc@Hj)k!E$CsH6omR4$*R_OLUCOXZ?o5B>?AqVgbUNT)wl1*DH!`dO?cDx!kfIN z1~0P7S(8$U_z`2AiYn`!^}otC+$mVWx3ZyF@OeOTEzg6B*}o@S6AbQxyxY)zHOLj4 z&RcMvf<(31&`H7F1UPHsaR|{zdC2lN0eX=_uJF< z#?-d3>g=6Ov(M(52sONxb^Q)+Zmql*IW1V8Cd#vO1ibF{{qIl-x`dYoDp2P&Z^8$} zJ=xG-p{V+JHj;%Cjt2*`l_zFHYqJYZ40*?(v2^FX%So93;);vZQ0FWx01|5f&^RJygf`(A zj&!qO2%NuJ9u09m_h3mvcgTm}e2bdDdpS9+l1$rmMz~S75rr>UucJm0_-oi%@=IoYq2Xx_r4o9-}r zH#L&|6*wYLbl$;P-&)OUNL>{1E@<$=A8|vRQHVP0wHwC0e6M*Sl(!!*>p5w{pGe)! zZrwNCx_<3;zM9zQHQ-PGH2g82o~?USMa=k1w(jI?gCW_$-1>Q|n>8Ls@}BS6KaqYwj1OwwyNHKu@~+ zWH@mS-@TMN%rm#e+RKV(@UFd+HBI{9X{5-j675ACFM^tl{7jW%oR^_n#f7d?7%dp| zGpAls1D5I|Jy&JthHx-Uw~0Pl!YD$}W9_1=WLXuteZSF}IqS!SOxu8b#j}z3ii!X} z{!A$*;+L;2kD?|LaSm_3nH_No#pGTd`EBN@JH&8wl4)G+0@ z;;PLrmr^M??6v*}(L0M8NUXe2afr=rey~g>Todixk{<+iR2EzZkKSz7J4WAPhKB4Q za=Hl6MAhbd!eTn7^Xifk^5+BbbW`EUjR@y}LVdSBPV&C&6Z|qN8#CMbZhexllYScB z&xGU*d<-3!!m@KXftWr-0VlnmsO;H9O()8|b(_gEmFloVMkL-S6~C~`NuQXHoEd!6 z#<|<^LXnRRve_aV{uT_(PR~cq4DQRvon_;!VSU6I2oAndhVNg`9I8aoDFcr3Y**=+ z6vHTU7FJ4+v#?4xoG#=>hsa{8=5|bw6KZTkfQ;0HR{QrUO7Id@X!DQp&Z=amHls7` zQam?CKB3G;@!i5`ZH&Db|B(G44w(Po-6~RmL#JN{E8-(B@lN+v+`|}~`L^vpDHFde zVrd;`CVNy_3>l(!cLq>WUB@@?L==ASu(~`p_cGsO$8fTqC!8Kn1ngD3uEFje<6fgJ z_4HeO5{+7vL*;mS*`E5XGdLDX{W<71mAUi7@ov6?Jnwi#nX;rWm)V%b7x(dkFU-fl z*L*JiiF{QRI~-r|jf&1#0`~`hE4E><#{?P~YCP5)ALHmux7fW=6k7R>`cw)-7nlRL zGDGnkuQ!yF!KwHY13&wf&iF^&7fhypFBUuKv_G%54yvtxE|rX@&Yc&`H#wtS*J8kN ze3geh9VRKyjcEiF6&kPdPNYD%MkKdN-ynHa$eaMqOb6Xm*gwJJzLWc|l1SM~lJlu^ z{5S4C&bc*mythF1nQ2UtlM+4R9mjU%q+yUbphZYAr0?VtO$>`n?yy8$>8rL08r16y z6pxn7v+qkh$0k0XqKigQX3P5$R^$`1k(c}4`##HM1cja-%KeMJi7V97=3G#3E$n(a zYeTd-_nLXvkeDs{(2&RtD{f)vifx?*R#p?GE9CAwW4L2W)MPaL%Iv&UF@x3ypTg4M z+RrCXo#)^_3%bxGe~!Rjqzkz7vx$*aQ#-35rycO~)PbX}{RMdvyOP%j=O&&^USHCg z*qOY(v@@|Kd3`95*yIe%J1Ti#x|6)XAk z^6>IT*9f|k(ZM}RI3sZzCCp8H%apKsC@Fmr4DR})n4T+)$x~mSaf~uBZ%SXEahx(R zZ)#s(De0&W9>lJmhUebk8;jjO%{9awP24g0I33`146`2t_)m=n3))N_MC zyI6z(XM=#dS5=ZMWVjhM93MYd2cl%@Zqu0bJ{0mze9$wWa0X64_GojUwjyyhcesxp=L|gStbZmOIWP92la_}Z(}Ne0 zDHqGXeO+(5-OzlyQg5>6H*ZVzCYK_nOSC5sO2U3SuRgZ8kwrC8Bb5#m9-EWDxDS?3 zuBp&4IzdcwrGb7bj*&I_JQlwU@yi(~;YgQvjPRXZKJ}27y2aw*%OuvOC%5);Rd#_A zt*wyIdS!_0>}sE2tU7y+)eTJug050%XV=|ln4i(-5oh?wUwJ2ZSB6Hvp+qL)Xd>o@ za*Jt#IMCY{yZdwo=zZr0-C^AsQ{yeI@VI5<1er?RLIsnjj%P0%hbtyd%6*Ubynb>t zn2e2Q&ke@gI2`mH&2OpGBSF?0$GMk;5_{bSzxZnz@0Wx|e_n|AC+c$vjO1i_F*rTw zZeQ^pyIFz6vBrzR9v^<@HTQ)?v$x6sZj6-RCHe#aWB5cn3b0NB*4d##6`hQZB)CtG zJ|KS&d7*x-V0h>LAL`x)KC0@@|If_~Fv7qLI@M^WI@?a$Oeb4|#tJ3Y(eRK(&{(h{ zjWxfn+do&`7Bx{+#NZ??x0kEzR$J}bUAo=w+I73N)l#c{m=H+_6os$?0Y%)}ZiWB? zDul=U-=A}5@_@SC|Le8?*X#ecC3Ek&=bn2WzE9`-ba32kI@9@y=H3}?m;mkd^+2`% zA_f_WLly4Ug3Ky&&v9;vyXR;@XwH0%ZLAq1P@#&{D+boh?l0hYhZZO+nv$-ng1)?uG76 zEWz{=Z;r(>(0QCHNqt5bk<+<+TJl1g!M~OxtS1f7+0WBOylso5(qvLV6e#bQmb|>g zWfRi(VLF0&9A59uBau;`wfyP<>*Xn18$ao^(Tz9M4RzrHwODU3+v4X z%c%sFpdZ=ZiHwRny#@smX=zMe0qK}ePe54RUMcFrZ;d0`!X5#VqTlJx?Sy|eCTBRe zSL%1Bb9)s!9iPIU; zBwa3#toRZO$w{pIjXaF%Rf%_7j`Pbb*LmSf!Qygfqr?Yh&WEB}=1*d;=5EHol>Lnt zIO~|X|I!rjjl$v`)k=(E@%mokZMC6U!Wo+It-^dAX8EGtvny9owNXhb6LMQlQ1Ub- zgoPz=zLC7AK$u&xrq|3QIzOxrmR*mqgN4@ET(hK^4h37;W>@Q^#7iT#S^A? z(@fFr;~lR5q}vCdM{ayrF*JB4>X4PBMBx8YcO)=PcIx~S-}+*OfveaEQB4aK!zc_f zM6UoafCp=66zxosLL|%c4~y1Iv&dKt5Cg&&=nKA+cs>A9t98x4Q<&Pue?(rK8O%Rf zluLwq`Q_Y6ug|Oox$24;Xqv7o?jyn_P1n0Oa*kinJqz{fy&?*$ zKO1Rz3k`{3I2U=foPKL9JGEWiY<&yuyq|7{I4Z84pBpL|;Fyc6f|tpdclQMY$<~E` zP8>~d??FFZz{UP|&Evb?aEJNF%-{thll7(aGZ&m*8EO4Ld|Xtw+ANRXRXwgNL%RKA zr%9v3izWHbX!?Db{zh_@j4yGgx_1U6Ep^OB_WopPNihFtYzstRmhWr2YXWM{`uM zNIoe1&|~xq$1FevKrlMbazps*0C4$Y7HG#!`ocNx-4Om#?_N^XGrsMLjYp;JtmPV@ zt!qQaBoYua;TUr@FphKN0m=1hCHWPz@D-UsSQ}iYw;G}%r+wA%;*Ysct<)Og{ZdP( z5yN8~T+wow;1ja-K;+?sfff@;LiE&hv*{!on6{kdn?=j?QO=DHX8Zp<@{NdQKHS@XwP4_nXxUcCK0-uR~L(CBH)YmnHYLS-z1F4CuzDP-%#ED4u2)B`Ev8@^Z3v*34tR?M(`b#1#DkvOV2`a; zM(pFJxT^G~F6d4B%xIGOwC43bv@#fZc$c~ZMHc7y2qW>Y9pm8{X*oti-t-f`QcNt* z^Q*@gDji)NZTz&`S_N{rWs`EG!aX-XoeI8wX@z+(mHpHteU3AP4sd|foTU3bqweTh z`r#?$8zzS33{#(*3$%GhQL&C(OJ*EFjbjMA1waVTk4@%-oQJM8W=465j*vb}(=T;~ zG))CPhJxByyt!rg0MX9em{C@6oObLM({y6w{76j^BrQxl@^A#a*ML9H+)GnI% zy4ZYs5~a=o|I7O9ap%z`=D~a+gx{e>7My>mC#}tzCOY$Ii!L5jL+X=xQQdk}6{JQn z73kuvri<^Zc`78p_ZO=%n4P{vYLtY@Kw>1}Vbpo5oJ9OIL43s+L89a8N)+(i1(Vf^Du^mOD*=3k>04KSn<^VPoPg}X^z z`FojL`mn>#K+*a$s(xi<{%`mh-st5TzHrTdVgO>{dp_iPqRq|sgyD)N_^fwQw}B^+ zn1$$QUe7Bf9nCxV%iSJ+M(JGO-DaA;;*+z)630|VFkMCXpL$h9j%5j zbhK)lY<0A1N6n8m!6me$ZE;6yNOv8rXPBQW!d89@Uh_V}CkOe!cY*9-eBky`KuwY8 zh#?q0AaW6TNTxj4`Y8@=x|Ku5$v_RMXP&%81BimL(#YyI^d4+suI0O$Kgc0(CX}S= zx)H0wmWO9VN0nU=`NofFHhVmR5s8cCD?TEXqp(TrXEsG5LpHyW)nnK`AWUxu-XV}C z#veA6)YAC-kL@r%*buVTO=6a2p{}PnY7~J2+GD&Uhrn`BtdPi45O-Q9($Wy!Y*xEx zK{@j${DZ^mpu$N9_V;;1R~z)468E$29k9S6n`rG3Ai=dp*1o7%yOi4b=iax@gkl}F znBSl}h;i9B$aVjb4UDMmSa9;@<&T)jihO;e*za|kwFJ|DzDA70F)P5#C^SrS`S7z; z!ngJaq}eZNby$0@lSb#6|2aeR>E(zyZK2rdcQ1!Q_=v4wa_2Ymr!*Tzl2>a zKS`g_-k}b5T9RG7&{}#MTp{l4f>qb`1$m#ds^+jC31!zt3CQH;5d5E?cbr<3I&%&? zWT*YboPMXaoS$P(Z3RCkoZ3o$PC<=s(pPJB9%N8^E@>mkzIQ6q^v}{&@)hy-a)SHT zq;?d$#)j^#D~yj+&yM3Efuqjj?f2!VGj$qi%=x)!2d8?&3+@Z%ck_Ko3`4N|ta>D= z7=Vi9$LUKWzWs=vkCA@65~wTaw;Ru60A)_EyK*v^=$=VL=k*BaU*^~9h+oj>nAZ=F+kOTgCZPs=d$K1#A0AH8Sclj5UyMx$lo zqCWY}e;vj^Pb!8cvwiTbFoPYMh^JI;kop@!YC|llX)T*Gw$eH-1!4`_x!^nViN7N% z1g5EP<=^=4-nhB&#yj5~_Qq1aHuUWa2fzIhwKM|Z&Km6RUH({x0mc#1N}R+EpHK1q>s{uW|uG{vEC~#J8*YUF&2eU*~@?qLHP8l}psU5lj7L zJ(J=f|1e87^x;`559kBO^nnpj`03&^1BH8aXBJ=xIR26)7U|a(5>d1H@&G)i@qTAp z{y(VQ{Oc~tk-eT|yWeSKMBV4N_|r0M%3eIkw}%1ZFW*z+AF1I({BwH7UdK5IxoG_X z4T7f?Xbx(F`EOH8{rQnfjZvVu(K&N!-TX-F=jfH5f1l@()e*WpHAIh{ZIRZG6&{U; zT=7z5^_hBVbS9D3(S?WGK`b-QX0vgWIl<}7_p0}RoG-ukld!~JvOS`*+w#}>Y)+(T zIA$5rBg4wjtH0K(XK67mA5s3pVw3)u^2Qtkbu)xfMDrp^TK`$-q-?3!`0%7b?N4t> z5N=9Jxn^Y6I?Y>EVWw>J=p2Sq-2TeBd}zn}7=&tn%{&|a#mgu;?Te2VDl2LGurErpqc$Xdj2xm?T#EL>5X~3sOe2l= zph6fNU*pvyztr+sD&;@HpP^;=4C!M06^v>H2Uqrdm1}tl%kYY{SR*jz1et6MHVI?; z9vyo1_j+LP_-k5Oaizg#JN3*oD`s@*h?Re;*r1639eU?mgY6lm!iY}XU3|x&t?`H* z{MHu--;OxoHD7xUV&>#Rm7~rr%Up3V*cTfs5`KT-HRn{!6;BFvig>B)=NA% z1JmAUcHKxFaaq`2c0>4f-B9L`m|+X5WaplQb8Qm!Qi z9h3H9E2381d5J`z{F+WRONDsZZmRof^Df)3%hn}&Uv={s0zOK+s@(e}fCgxcJ2wSi z;I$IxQXGgrWZJ>fA=3#~14niR%v#mXc3*`!tYb}IqnunB{uAvdhdpfkJpu=u?Op#X zb?%vxtf|22&rpA8963&U*8E+}uE2)Jr}c6D8xVr)dF;#AhF8jG(bvxx{axi423!>~ zMBCEWk#cU8zH&c)9aw8LLw*nt-zak*`zJlqtPwd|8@6^#>ACAhMEq@}mfI+St>CY5 z*eP}H2s)3edZgtfe{m7{)Rfom`ULY6UD?OkJB{ZUT|u4Fp)1yIzcrR zr}W+Nf|GYTNnoZvu8c9ySiH{2zr+Rcr)zX#cT>L^cd6;m{19DAZQ#0W$P#5<9=^6B ztp3`zNaWyC8LOu_!@@6FF^kGUe{P1hkzq;w*aVw`#)9dPEl#WMS7YUIlXFyOxH0qD zPtc%dOy;PV2JaO1aE%!aRD6>}= z!wsO!=PtBn;tU1F*{`TE$Q^LEB5W4sCc3m!BNrcvjHkTyiiuLwHpcs1(Pp?G4~6?U?# zsN9(qOz6K!JM+JR>@f>*$1HIEVy0kH*QD;e(l46PGgrQmEea?juK|ptLmV-x zxZPt&f1Q1?%&14c*iN#He*vXPL~}8Pc)qk7hq0S!ONy+3ImYQ}Y-(e`GR()&?`+XeVc4ZFSHn|W&3?N|B4BJB|WlGZe$xR#efbKIkj zUMZ3KLWM(P$`+z`-t(>|z@G}e=y%t=`+;vDg1zSrrn-8!rW&6zGcEZu7$myVUk>`i z4z927Ncp6?#{%$Uz8Zy3m{``%lEk%&0SGR-&O`+4{%ie|MX%9My{h~4s&m@PxG9{r zvO%TNpP?t~Wj+?!syom87`H_|@2t@Z4V#h=w1opKUu<8A|BgX+DGG$}R|egm8F?(-<)=UbV{~={9Po5A9r_n*-^uQS{~;s%Z>_7e_L|v_wA;%-(P2GnKPpvzS8dB z`_-Guf2(f#^&5A3k1Lf3dak=K^J0JR+#7eUY%s6fMU%VLq=wwIsjq9Lf8W&doS3Zt zp7|ax-_>qxd*VDwWmPH?_Qfx`B{vQ1eokAbzD@8ihKCm!LzI_q%oy3+Z)$*zf9^eP zdT}ap_gLqNWwIb~E`U2$o+70P6Q*6>`=VR&rGedu8#*rTyx>{kmkro*@eg9cgO-)2v zUowUN?AhVr@i(aYnitP1aUau?G=|-k8jB-t7RuIe?w}yO=>M>0Qm*;l+LETT zo1Zt@ijXB6P|?e^@w9MyI(dv8T)Q(yMpn*&XMaKHH?AJ5(sDsAe?-qT<; zZOQ)fIZ7&rSklx#_3{7U zA^zbvlu!Mx^zTi7nEH6Lie8)gxUn8TlI!a(%A>R0+c<)Hdh9Z($s0c;O`dc?{C&JJ7)ilKtk4OvO zU8tBOq~~#K=aJ*cH0N35TF1-cCkN3^M=g%6-hCpQ3y~aeGcQ$wSe1SYGjR-=UW-E7 zG!%9VxkOHDsN($^@`9fs>r|z4cX`BHsZP$+`GVERUGr(b3a9q!NNXLyLQf`7+PTv2 zqy)1Lys(Gznap^auo4`w{k$gMMt$zg_>W>ohE;o(YUE9ro&Y?0zh%~^L;mP`j$Jlk;Gc(4kDv4tS&4}_i=s*r$o#A!hzie z{(e(J2O)F55a9E%INuZ{P}dEzI$7abM+VCAl&(5UR^2Xk6s)|H=l}%8izPt$FE?XH z8Ts;>!)s6mdCmHglda%yq_v3|E&8||g5o#_C*??Pa->7l=k2FByl60!-5)J;c#+N< zUfxowMxZbzp^(nW3iU3~TCUHPtq$dsupwv%lh;qh#B~^eksD51!NMC(%N%kczK!y6>+x zy^LBV%cq+ajkH|MheXJm!W}j9OFC+9;NJpDu3*-(Jj>p9b0E_4H(c@DDn9S5X;dp( zizBdUp9nkCV@GI%Ba!?)uAb&Uglg81XlHtvX|-h=FBbSY6&60Klu^cFM}0p7L+{(S zvcBIEUwMvyMC?RMnph(BGxBH-ToSkH{oaEj>2$PZEtP-=3h`9&Q$d((A|%ATW|;v_ z^IKG7jgyP{`sOAZgWkN)mqvc_t#UpEjL{T7;_-;Ma8x*2H;3ZF@3PZH?)^iH-aAQu+6}{hgjo{kb6#@KK*DRn^-R`yVq{z!7vG?+yvsFDuS3ewGu%Gw6B1kr0 zW_Z8(os?QsFz8gN{sqIe1D8lTK_K|4X#52@8|ENWC+0b zm*!6*kI4Pxc?)1ek>JDV@&^Tb&pn{_TAl#KBEL9$SXP|tPvyTsq4)eU!2Bz}d7$uC z$AbcU-nf8=Bfc_$0uT&!H zPsOgK!Ktelo{!3>R|<=(hug>pYqa}KRVVr?AVRN5nSc}1R4d!9neu^a!`abRHo($x zmU4j;`}EJ>k5obZb^OX~-l%gQQhV-d;h%etQp^Y4+oRZ4bQvY*9zQV`m+G-x#NDc8 z?yR8u`H=HAQGRalK?-rcDauV3YC$TN?P}VlkoRJx*#R< z5&|*f$(1mtkU}lc`jd&2!+5VY+eG*^#@Gi2+}Jk*^L|~zZHzp1dx9#!fFrZ$qXwe=Q(A3=qd3_bl;j#C}Vt$vwNyx`1XLnA5F^-N=eC)yJ$ zWf+kqXH!Ja>E?HM5DSFA?pA$=bAq|S%Tvd%2MIQ`jt1&mODw*u1HqHaIUYPXad{08 z5Z@t4b;=$g|$PqTXrS zoac5LM|uim#L-_y42|I#sX1f%S=AV;TBKr!0Ld-ydgmvmUu z+27MDCoEkiqixlUVTpMf7bHejFFh6Tt3>%U%O0Mxy!MzIPFkFj6`#VImzl+`zpP~W z{1a5y89!8uPc`ctpR#;Dv&~ah0O%+@z1&n-AXu5Qd;zdhtgzsOUWXF!aePT1fOOE3 zj%Vk)IwX8H-N>c&b(G5lXk$$d9g|WXR_684h12_zD2k!|EfTWC((d5 zvz9EN0@39^oS|Dl&zVdC&c8s=C{Q(PQb*q;LpIRWo88AnGn((y={t^wa%Y8M#nfA<#E>FPoIL#<2T56>Kry4bHmo9sXHt5p(gx)N}y;3 zKTV<;C4ZB$xg3(?iKgK3@Yqeb;#PMzN55&GQqU^he0T zRg)~~`<8RC@5hCW%}D(`bDk+kU*bx%I$U(qTsR#P-VodFC2F?j=EzTK>a#CM$5P7K zd1O4|s&hs#$J5Rk;plz(NvJEd>ONx{Fp8K^3CytAJe!gkioj&iDSFSN*att7k1cP# zQ1X+H$Q|LdSKX`2o^KYJ`)ZW@UEovMFPq2B8Q?GoW(9RQvtPEXE&mm(r0rDHdG^r~ z317RGwf`etI;P}1DzOiJnrwW|vn&0ZKmH31^7^ull4h#=#i&=79pkp7=||aOT*KTT z6OnnqOvI)oNVoK_IAZ!tL^Q`yn50p}V*-4_kHT4UrS5nCiHXE>xIfVNSBN=(W>gkp z#*WnFoi#?%>#Q+yU-rfFFSa+|iymQtTNCEg=~WMs%QM&1gI0zQ8u)Opl6@sa10~Eu z*u5%5L!vMPb#bRA-1lQjNHF**-p*vdZ})xA7q4`mXyM-TnYXm2ck;l*HDy!!@18{*<&-sdkG1B; z3ad5Q-1Djp{E^m?qhV7RSA>jP=Ri!;BL{u-5&0j?Rhq6qi%cnpK3O zKF_PXpaIUaAQ)wRtx}YX7@yJ{$m{s#!WgeAW6c{iMnhww?iU)MehbrcW9bW1>!!RC znYo9VY?!h(GP8H+%T%s#$C!^k$k)o%XD_x~Gh66`b)j1m4cuBbWvz2-*&So8nxV1# zWNjrOPXbK?0RPS4nP9(j`7bd6?-`FDe}3Cw{Q3KAH?@{dM`uZHnYNh*0Sa3Hv+cde zHN=a(+2~@B_a&VR+|Ua-Gjxuu&rYCd3nf3Y(hUx3fyG$Exs~rO z)Xb1ZUM#NDU|T@Tz$?y-P_Z3_V@qEU^m7=v%SBDyOoKD49{pxPsx8JF`0F>{{klPx z+Iq8aU)LK`+U~!X#VU6;WY_4Nyo%I1-NLDEc5i8LCyHgks`8N;dG{eH&-_(|(E&}8 zGX-=$!w`N6^9)`|@}eE9JatP$;FkKS|E`ZYx705QWXD)VHnr0ILehQcMWzbF;a~H5 zxk+O&9|4Pl$oym$6;8X6W);pf5A;bQ+QUBP2ZH}f@&e5x${YG%W_oUUwmrzZ$thn= zKCsR;Bcw4l2a~!wYw86zSX<5&9ilATZjMOpdwo!!P8W>!)`@atD`=p5-?ro5Yd%2) zMX@B@hs}(aw{|U^T8z)8Jnr69@5Y{Xr~SOdYM-+G&KN`kn)+Kru2tMEj10!m>_F-o~au$~MiY0*QZBx`JVF6ke$$1(VmN(!B7P8pOEu zkoL}$EChB8t>pD8r$4f~*LZJoCj+!LITcJ*gImVkWH2u;Dmdk7jV1E%JXUH@PsMup@T|>5hWeag zYnFhlE=#|}65OT6YTY@^{~|Z|3ojmG{?B>8`KOLIgOg(bo{mz0D#lb9lB#Y2Qz551 z**kz#GR1u1fqyAt-3Q2jI4-%cK8bci2_JT#vIx=}HSqci)?@4TWa@eOjBU>I(npKS{=Jr&lJ`-uju)QdGCmn@yr z*u5C#D_78Pa*NcE^XAt{)p)c_?P+WLs3wc6GUtk$oA0aAN8*kDz?6}4q(f;)%8h?& z8CuYI=yxJ1c2t`AQ#r>BsVwM%JAkEObpV92~ygTIjK?@T88ecOa5;M*%6kGHhxY zi5O65U@K4@cdiKMw@C$pqzsQm$k2w+(F*XmtnYDy&qcxm%@#t%tsLs$vPkPB;Eet~ zy_|90ChC9+oCny!&nvVdU*59(T)sfPO3ep{WDFpG`T4bLeC0WMG3sBonLmvmGpf^w z(M}sZRm=HW4`ZC+^xUk>1n_Lcg;CIZoP|y9E?q_u-KHz&Y>Skyew{b6yHDc&)U-)9 zvsva?l6B6N!6mtXD>W4}J}cDpixF)!{c0s2k%_jWCZm0Q@5vvJRIUA(=6fHT&zOo3 zOQrevGWqiH>8dl+*^7&rbX%krBFnBfEdxO|Id?m+L_7!BuMGP?K1y8~LgLhvG~;A#SBEY23PQe|GSt!sn(wjh zY;x%Gv~0UPIg}49=+MfK23yhTP&JF(%6yI1;n`2nMp0hmD4<^M$k=s2g);L>Mowo{BzK=sMZ3^5Puy4Y#++WFSMlGTQ*3k4*%K{GgKFByScJ zKyn5U{SUIqe8?xYD~#+`XYRrcp6;R<^RrNuM=o1uW>IE3iB&U=OU<*zew8KWr@2`_ z{D)0;_l5j7*L%C<7X;JY>xC70?QK0>yY~0AZ*T8u+upYQ zRGT?pYK`l zrapWE_CdJ+A4I8{v>t%Lt4s7?Q3>`mzsdxgy6Rje-qZZ6V!`@dZ}eoUdzzmZUI1M6 zWR~<~>S?_=*ca)2EJ=rQbZ`C%(}DR*7{jivwH1gfD>Gl=MZO21i_`K8(r>-9=8gpuUorBiV)E;E8sI$fDv))Cq zc`CL3*6uIcM4h1c=(?H_*!$E*+p!Suw;jcUvh8HZTA$kQg)j7~&rj|0;uBMwoyG4s zi}pJ6-*jqEOl8QC)^VcW%!W79Cu-l>O)J^XpnJ^;4t{n2L6htSdDZ=nmd)Adh0jiH zMf`W~uJ&TI>)x~k43NT3qGvd8Q@vMJmfFte(x@%`Du|=kpRn5OE;G!#muTSh(Tj!H z{9IE{#jtZd&83}h=p)uaYnQXm=}T?8HTPw^%Z#zxjPbA;W4~Tzq*hzosgSiP^|m+f z5)vG!2I+$FQ&=XCqX^GNVSr`I_^RwUx&bZCU%;Q9Ouwaa>*N46zV+ zk;_m5kX%0#G#gFhx0(h40GGH|p_v3X(@a$`$>UgR9SK3;qErtuL1kXcrvx?1ayQ1= zl$e3E{%#3=|E-A5d*G?1+EJfjDAAbGCfq_xd+*xa_j<%EI+D?sgz80djpcfqH zaJX+((#~D{d$eVYgoZ*u*k7o7%?TE{QSd(bV7}Yrnm7 zT%}+nfoL2KTJ3<^@o~;gZ`$$Xyf0H_gY~v4*lU9%&s;%CkG0uG`S8#g0O-+i&Nc5? zo9Gvvy88r6lZ>=JD)Ph{cvot?VRu#{{mmQ;=RV)8zZW^E;b&#i-(01;1qt`cOyEIX z2fmx*ul5gtpY7KDy$uWrd98sd3wgJFt~7PZs}7`aCDKrR9Bn&V3Yt4(z3};VmzlQ1 zX4-aY+S*Q*E^8~v(CL@jPDQK@&K;Sy;}HRD`aylc`PXLtnmIGyX3>IPxY9XgcWFYc zlh!V)-K$R917;fi3EXKWGpA`=)~Uwr!E`j)Z^K_O|{Ap@VkN%%IJRXs)aS zR=<_!5%!EL>)Qq*Hn3nOv_n%IalUH+{doi82Rfo$8can7{{_|vgu z8XU8`FO4&~oGUY0&zY8JTmLxcim2Ceo_RqxW!}8YN}OK1`z=0_>bG-uVwkm#I9pQf z)+T%4jV*NTU3=dT&H@wK5?;$>z3DxYE;L|1`lfTmUb|!0RH_(ES?jf2IQW5gFw_vV z{wqN~v+5aTchvp+924t)&i!_?ey`5BUrl(y3sSGUUy|fTQecX$%|LvRl#$R|7wXfS z{&y97)uMp0F@Y~gRTOg8+B@$>R!nWQyMLErruKc3@c(6N1b=PEBF@=p5v}gjHvYH9 z9_YjY&+dMR!FpkR&hV-6rtZ;*LqEdF6a;)nlFx7ST0W#F!U6&A*PHeAmMNx;o|&>7 zWzI1ymU~jn;<;=Nt=H__`C|lWsW#?tUqc6T__{st!*iLSj-c04ZaznYGwSX3Nmpw= zO`GcN7vff@*K%30#@7Y;Y?mSHT?XcH-!m}3)Z*O4g2zY4Xf`NG*~GidA&J+V%I+!6 zpGCo-{z>%z1)+%cmGhDn#&Lx_6OQ0ib0Mo z0HKg0OT_ovQyT!z!&}%6 z+B;Rj?$TfHSD#Z$%i8tVYnfo09f&|V1);d5E~s}NG=OA?r`)@<>^TKU@|bvG5ROWL zqoYjrS5{8iXO{kJr?P#e`9D&0+Wz#qA$luHmOR{U;Rn$A^I`C$^EdxAu`LI=wc8AO z*;OUHph@S>hoztoOE~#0296|RV5L=LN=63akXP|JuUgU`1S5vJz!2h2d*5sj4TuVP zkCZmkbvFpm1OOW67=i>upj)(6xLpcRywcV`mQ~>rIP!uM?A&)z&De);k7|1BpBJkf z>)d+4d!$m8yq1uD+K!FoJp(y=fgD)U3_%WK@oHk~kK4>>q%*$r1V>4@_W?ER&fKf2 zt!;is-TSH~DIR9M?R{TP(BrxFK1XhY5M6b`3;&uHN>c0W+I0E; zRW*oYcZENy?vDEqf4g7(XLUE?+`7bTnWXvxfSS11GI8*xeky(#t@Q>5@G}++ps(=m z8%|FGz`+%en;{*y;r6!w z47Qy-qpkl8=bGKl^}Wv5-gIW}CGASn3iaB%H;R-c^uDs%y`$c}<%G38y`b8geMzbE z9kc2EfG?aXHLJlF+L5xDaY-q6oN#7UlL`)Wn{uq_pR+Fphvbv@;@KM`<`*p6bo%_# z!IL}ZeBSaZ;DO$X4>fB# zUrD`U?-TvB2SjVz-Uza31J;;Iq&fa-CI`-N7WO)e-{jQFrXQ+@-o0T`Uo(YwRJ#k} zh={2JUd6eoo>Y&$&nHnLX?9Lj&<9)}%FP67=8hUFb&Hw2E91=E(;q;Y!ochhL^5N? z>2*O(B>pxyU&t9{@a(vmx28sa&YG5?UB_t zTK>lJi75u^j%s3NCCo_Mejnscr#77D%nCYJCjG8s#yyR$Ha<9_=eIMI5&lKj8+tmI zwF(TeKt{&>ap3=T2N9x!7{b4Qb z)T2WS0bN8Y_XUKMl4xZ%3O)^H-W*xYyewjixDb6oZNNF??6S5>yp=pGeywd@T2fW) z)7;Xly3st=OG;ZV=AN()IWbs&9r8gY2%%1R720@HTT+6{){;hotYBFnoFptWXsv;v z#=R#dHsf8I+ML>K?XT%TBo;pBF4C-Pnk)0EQj4C|0 zfOOrbcG=zMNL25-H^Se;e^Ws_GsE7r50#|$6uy>Xn-fkQa%Lh1PSE?vss2|aI$3SU z_*$IKgq-VR=5(-?;9a)=j7aP40(M!q&9=E7Nr+{CdKC-h&d<0P1|G|C=~aIU1hzGjN!#6rC#!$I8QC7){8{XkE3llZtwi-8B`AOql}gaVXE9{W3+n>g1vGDkUcb*_OCf!0sx>;6{MsI zi*%;3c>`ql*U_aQ@UEu`o<`F$yvr>y>=<0}S^_0tBxeAT8Z`J}s#d1js2H=mzQ+d2 z&YfTD4ALc47%p<|wcG?RHx96ZPJex5_ z!R(_}m%VdtIV&_L<{Y(8Jp-z>y)m9$7Cl~pcx=6F@QH#QG0<7yMYE1nkN&BRI3R?$K>)2Z(YVcxe4O0**;OfyZXbN&VbHdJb z#O^Aeflf_qHOB$^5a3;rV4CDIBr{8RCEpFZ=epM>T${5)5^Q{LZwUM}2Lw1+9NK~6 z1MW|oxefeul?sK6KibWeSA8*hzbeF5*GjXykU{1OEk=+RIi4fEOtmPExmPr#m*xDM zpu4P@tMsx}{(XprwtB67c24qU>aEnfY&h(J*FMdF_x%x#n$L|97A@`FGpqopits3e zbWB@b@GLuLWX+vJvZnV$nZX%Q>xK-=AM#qFrhu0GzKCoFIUr(3YE9~x-L20LZq2QB z=Wo$y%a-J7PB`gR>FNt!>u!)FyKuin3z$tp&Cye! zCzc^L`(mTd$8Sqk<)?$^emv8%y^l~06n>H)P@ImL$m6Z?^ampA^|4o%(mMzJr zxsnL$Z(C53EM-}-N@QgfGtL+Rpyx6Fh>9}w?>cyuR77J6Nl`(M9 zN`Vp7ImF{~FLo}EwMS-uR5x0~HJC46N*zf+az++Pm#0pqc8RKUFN99;zB0DTK9J;j zg-dGm_0|sSm~{vVu}nHCQiNDJtJ}d~y&hfjEAZCitYN$Jy7M-FduWCvz~cp~W%l9Q z(o6+BnkUHz3krP>uh&lqF(26fTnfQhNA1r`_*N|{ttwm`-5KfSvG8TJFxCo`rT{v z_$}|*&zWih)3DV}mFR*T4>mb>hZ$FBLxuXl2|+8)RXx$XYhpYIb}|N=72CQM*aYq@ z6sC&&Mpr&0!bocHMTTst=+QXBGqm~j!IcdF17eSC=ux~-${fZ?6S*+s-jP8U?Vjh> zH8@qtG+JXmhqhnP3MwH=q#0{q%=ASFQ)~^O4>_4So;nIx#Zt$d zcM-w?)tEi-7QCLqgqC*`ForueT#IZIyX;d7F5uaIR;|q5`3+`0^^$#fhFJ$zch8

etiS4V*dm^om^HK~M0he!vhlpXnHnE%P0`#Ewh`)hGFffAxEE6B^ z0!Vu3#4B_Dz&x|yQpD1bvkL)&PML{uW4OxOhgX0fcGst+Ror3k_)ioRuzEPFbKI>? z(zTuE1G6aAkJdOC#aEAm_HWzo{^f;q&H$gP(KqQKmP-t> z!^w*To9pe3jl#wCMNvu9VMr&S6>0r#3&SOKN;wnHwJS_@Kw3F#1m(-}-pm`8XTiju-> zq)aRl&5hQ()Cuq$Dp?zHj$mU@V9e@8qOojCq@~Pgi&90CP#4f-vbD}|T!6S56iHG{ z=nRZZ4>JWl(``^r03{80-Izd~&-3K`ZH8CrxbvebpN6E}T81bOvBs|9Gez?Ieu|7E1M68|{6oMSj_` zlozX9DUQ$UY*mcqXJE)+W^MK=#<)OThqK-8`Y#FgJ8wbe!3J~8&Uqi^zPpUBc-5Bh z)MkU#I|_J1gp$ApWVRh2PiB_l=%En^P*Ho}Ws#|!KOx1Bb>#Hg5Q@~E)Y~>N_c5Z; zd@8m}ZR>+R*lBb}$BX8Llb=1uz}xI(^xRhs#35G{MsM~C zu|B1n#<@9xMHywXxG}>ThTS<0 z>_D&{_|(Vs>faq07~l;kk*P^78;oiEHBjHw;JlOuZPT;;2K6oEwI?oClWoT*INw`U zLKE@i4-vZ9Z*M<)Hw(_JXV(U;9tfWI$XHXADSXsWBoKrgE`}nB>J%x`G?pru{}!8; z_v$~E?R}G)Y~lL(fj+S?X3YlWJFRd_@`Ne{mm}XvC+5p`xY{iCNz@_2whlsFEUSm9 zl=C(u%Ob>SvCj45^erGmyRr< z)?!M`AA}mgsE&ofSbmSM09yDxb(P_9cK`luOh4?4$1XD8z>R!cbTPxpkce~a{{v5qk`*!1jbPjC2Nh# z_UbL~-_Fs;QW6?Nh#FkCogB}H(L^nb+TEpW0vSw<11#+JS9q6=B5kJC!duoFr>OWLVdtX?~pewSVy{^D-|ZQ8aJ4v*n=%??J4&=@g7W3GP>x9^JhT}d*9OoUuo`-L-_F3FDLZPxCQ8T8V~jlrL8 z)W=}qz}MVbO_(G|jnSv35YfvKYhh}rv{VcWF+?cW#55Z59gLnm|jz>~@fy3LtXt$+&YffK}A}aKLWh8S~*zOk?ea z2f9DfJHWUUfaUCify|)wn)~=}6|>27f4NFmz^i+0hKC{E!d(RQv=d9Z*EV?Z(UdAI zCFuT5GgY}$TQYdZXn^G9qLloLTYZ7YbJVbRUIrP#Dwbf((2#RoQ|wiL7*pXX#)Zc@ zZyYK-b` z9LMvwc!uBBzZnW{Ox1#24Q611^UGWbYk;)Tc5;GaCKu=o`#k&-zJa4g_Y3Iqabr0g zR^J#dLyTJ6?OYYR3j^CjkX@0qcdEKJ;R9n|HqaateE;rO)x$=WN7|j z4o<+wBbdZmd!PJLQft!Gvb#IjdD%JRg(BivTOdF*HBCgQMmB$7?8}ltcl;Wtw71I9 z1jizDu_AZzWZSXv_F;LUICDexDY_8Ae z4+d^53Cw9II8|Z`HNIu#@>y$D?X=g-UniJ!uaq-dNRDerywfw>NFt8A-&BS4oP_&e zP8SdE<}VMU?l)KIevXKe25O=ff!ze;YrD11&ixURG0LDecwK6;+?4@co%R44yb|=k zY+SxCD}C;-(FvIyds4cP1gps#4>r?0`yV^^VYU(W%Rfgv6_neD&tx;<#Vz~gEu!Zg z-imR0M__hzf-@^)zg!8Sqbe>^6U>uFv>vQ6tuPe>hQia13VX_Ri686Pq_RK74~-vS0qC#1%l~=9d5$+&a%k(Zvicq~G3( zi0K0GM(50wsSkW11dckJ^qdJs(tlvPyq z4pG%Rd#Q8425W8rsDw_1nY%KM8#Q6|KQ^ROKW+*(>?pi2C?anEHHl!4G^e}ryYXeuoTVUgCjNZ03 z)2p~_K2TJ|)YNfjj;0x{otjMJgttbY%K}xF-6eaGaMiCYyURhIR#MGI=9Bq|%pO#? zyVMJ8gT;z5`=wRyAix~C@J;IUSPaJ>y0j?b1_?uBb;ez`KN4x3?$cNSv^N`mW!!Wp zEB^0an*r_s#+wD1z~j0`8fN{&?!T_mjj?Tuwl2$Y8@QptYc$?SFeH~o>XCWR1q`F^ z&&=~>tEdI_!vKdvG#8{O9W>rl@y4L#rp&!ElU~;BSFeE7rmtuK6B@~u#KAtvT^8cnff!w4$aN|WRBEz*0H-3~A zKjplYhR8WP`c)k( zi?}kxd42>6Ivxtj2_J?APr$Z9&mp1~8-Ktan(K$N60!l6m2RWl@pY`@fOhFZ@f8<^ zMj969ME}X#V=15P5IwS(%^&SlQx284q`4ivW$g8cWk|2b+p2oEj+D5sqO^Mphh6-sD8gtgL0oOJX66WHt1^`3p z@iw&gN&V_rNXSc)b%w-N*g0uRrK}D5nBaS5ORTUr{RdL8(~m20?k@$k8^1B#)Ty?2 zj@boVY_hjDVYGFtlGYmOywm~|R&Ll|2-({{Cvp5OWQc*QA)|&vV3I8})nEhq&qqGpVyMKmB!Op1@ zNcOP{;4n$+6`QGk8yVbtwhpMzgVT~ z>l1EmBJgmIYi2j-Y$aSM)#nfxf+iYb=3@2$c3FjR;NfP~dM))f4=T+PzU%D5y1JF8 z(&Q$HquPLHRh_icNjH>!csDPkzmwBzfGQ2eX*O-zaqBYa@2v8lgxux2N?)U{lL(?& zH`h1tPSjnVGfxugKLs&&`EC_N)J0ig)?0g0?^;q!D`iV0a#Or?(wcDE1! zbKOgVcJC3kP6T0NMQJ-W(YLQT`=Of&d#iAOhT_N(8wB?@V-iMS!$8HQx8VP6M<+V9 z8GECEA0RL?M^e}#1fh=8L%VFH&0I4xNJGMo6ewVzZZo6M)>*h8MM#jy23!jG?Jk1~ zn@PT|2?Vm!2#g3|!X3NYU_@LY8!=|PTq}@P8*kg)1|N1Bd}st8M0*fMgbR!ZlQOPi zU<8_LI6{axG)w+(@JnF>E?jVGzjtU@lKd;jQ~=r<+^TE#N?c2coMGioW@Ze=>MsmF0 zK%-$mwd@Y&M_>VQe`nxqgnrA|C#IBe49l_d%(1A54zBmtbo zaB9H8vdDPKe8vN(I3)?tFr3>YJQ*&fV-0+c5k&wMon9|3rNKYLq%0$Tvg!9(P<$i{ zLf}M#*iv9Y2IcTS>1Xruvc1kAT#*$SCS)Cxh?zzl^;r*2_?_yISN&<^_H}E*ow#|qI|E*yKEnXMtlw1xUUV-i}y zy$r82m0}V=#i_)x?9^Pat^q?t~Wz3k2mbR;ASOo8(he zbFO(!y^VP82N5b3qEMVQQZ~CX6L+}AYdL4|iJ@fBxk&3zj1Sm+pNu{G3A$c#-7gdT zMX1j1od>oq^d8*J{gal{!SvUWizA3{eg`rMiTNtIb~fN`{reN0!O;}SGj+=LI}TYL zhuca`0^p9)uQ)SKW#3R()oAUbZo|QfW@*en@0X&ap@)ln10xFOy0CFxFhNtwFoXUB z;wB1$&Iz2aDEL1pTn@7!+GUYIw#m+V2wTANeI=kaJePgC%9IDK9n@7EFG?BXsx6fV znrB*905B3chkG-Xh7fKw+Gn;%o9St-ikXbsG)XB_2Pm0MNtv%#6q)w7rZT-#I3^|W zvWgq&p;6zYtF?oQIyg`)VUMJpCAZY6rdVnosh%q-57S{K9hFvET}i;;4;L4; zs}9--OhyNN+{o5psm^H4)#ejHQ5vKWX(&$_)pOKWJ^NZ_DWFY9wOdDHBOSD_ZXTw8 zMs)cg&9lBD&GR^?NrGz_S`|E9?~L3*snI;6U`7RJt;2zSNC!QrZpNVrbu>*%<*eB_ zK2H6=aj!G|%_*cD;#?jnLImeV0}@^7>n%77^PA1UGfEKm7UDJKJ$^^V38IczMKOvx z(<|0E%#;wX`L8PWHOS#HfmsdW*2HTbHu0LT*>B!NjGnS}kt1I;~|7$D6 zYj&A<&A9KZ9+ve-b&p3K`hn_-Xjv1l`I^@c}?W{t)raGigioUQ@ zAB@+WXQ;?Z?`LoD;HMY(G@`>$j}lymF(;b%WvE4gCge-=zoqnj_VX`fXd=6}mUXH3 zV=tjU$^bkq(s~mclVWVpBCb!1bvZro3K(oK6sMlolhSV$>CMf?-)cUZ*+s_7)Op>I zm9f@w2RC?>v>+pTfcZEL7}|5x+6>*$Ze7~eVqO3_tD0>y<(1YpYKWawVQyzTLj)H$ zkSG%XGMXMtHeTw&40)-`%c@$}Y5zLIwf2g_uE{WwYMx{F@}Z$TZ44F(>Qqukc~7JV zt4PCr_=@)JQR<6sRPj8<_Oi?gCXK}k{D5>NL=w=TP&4C`65rP=)o<>~>^3PCM~$Q! zsea>uip5B-SB0=>7X%dg5TA!hved%mrtq~w{)eKhNM zFvlGz{I^JA#LEswlM$Ep07a+c@AD1RHuA${!-kA7R={62PrpNSDB|yKu1|~l8Vtn# z&%r?KI!Ergvw>~d^UThiUb_Hy4s+9FKOaoG> zO@`2i0l;cExDpUXz(pl6AKkLjdiWV_oL4{t!|ANocxHmlovoJ9XQP7_f|OYs0A67k z0svS*b{ZLcjI6^)5_CG27OqL3Qby!An`4-biNJ6=1e6d75G>?|Njw@rLoD-K0*kx= zm4Yi^5OR+2H(T0f`B`s9Dg0bnWyYFqamcw{3SFX{$2xWho=#8+Mv>UX*t)7dJ0i)= zfJt&=^5I~1P%DT0lsDEXIG1g*-S}B<#^T;B^}d>LuTGHr!ktm=eyQGFdIHXSb+tF|0`jAHae|w?U}S`+ zvcIo9UI?@9Bm>g1Qe52SlK!O=&KIhkrE%x#`YHRH{w4cjA?Wru%UIu^Jy3wSuQzMC zBQ0+LTgW%VV_)+d-w)oTi8AnZTKt$)cVwVKYNAUJuLFu#CJgOGR0Uk z7L)iZOm<7ndd`Tmm``U5X(?8E@5yh{0xXSKMIANrr}7c(00xSSm*@IVh{et}^8Zn- zgz1+jjKZIhHGzN24}XR|YTHe2f?DF|=W~Fn0%ZSZNeM<}dz<}~1fxh<)<*o`@RS7A z$r}^>E2V1o z1s;eustZJA0_%KFl9#~1m}7J$ql_e^Vx5B!Bp*`TXqGAPbC&t4ijXmX#k?3^QQ%jS zg)f7er-eAXcv1dwMqvwQj;7IHv+LFV1SY@}r7@$X*Ya7>^^_8gpp#&t*lBPLeZ@_J zb65&QZnMHM9Q=nw*OBp2ltqm!aBN&rr6AsMotiF)Ezt8I>bHxBsJfx#g#>1Xc>C1c zHgp~rvv!3(OTaij4h#H^LA#i@Oxk_F+_`a(oEu7yZ-{SHltgk}%;xJxQMT!HbC}{^ zBQ5EoIqXIedVk?ChfN+bhiNHIzU%*g+rxrG_AvCS!^~mfLF<>`z*v~l*K2zhW9{Wu ziRo+59#)Ax3=L?&w}%b4g~zzDnFDEk zn^;uFVw;YiZWH4zQ(OLV#%!#8a(JXkOcRXaRhp-wSuAAC#U=-vTF~MRnZ!oJo0q*P zs^$yExbfyMLAirHte8J(+1>*swE8RNZ%Dq?$y`OYbqUvhLgoPT^fn|DaG^FbTi+<* zv!qbv90>8$kEoMNpD*c(j}?TG+S2zVv5O*xA{J)?)-L1H7IdnTxUdmfOu49;58-66 z^I}t_U{Ih4l&_G+j%bmC&N*%jfHBGIhGnxeiR+9KsF2d`=&<~C*Nfl<)4cbd+;zrz zVP-@}hem1+pPOy-?&e;Hs(~j_puybwD zeo5);l<{pab6ri0DGXT<`H&%YzeXI&_Tz~Ak3O-}lyhi#rSnQQCzVx2VHphnB@njY z0&ssOa9zSJW8M<(b2%-KD99=<{OlZo@0n`?zZMl-ctICTOjGfR!zct2%3r07xpZqY z_~Xjs9ELQ^uwRa0-%}&$N1OS}(gdl>OB~qUAeY?hGL%WAjQbx>^ReZsif=BZu>##% zx!ZqR{5_#w@>xQ_c1SBNk5ylKQ*sQ58ggQ7B!0_y50T$ zF1Zs6F1cIf=9d9lwQWY&hmI9}aup;I^&TV0W?)npcx$5B(G$7imDN1$~GsmlVvB@bH zb5A;)%&x^BQQo6c4WgYmdQMDjU)3R&H% zhbfn5NV&Y(&l0%C&k}h07N{sg`)%}%5&zdVs47Wke?_xJdAcQ;<4&9I!A%kVWj?5m zNE8S}OXAkXDBTFk`Yh+qWUB*k_;9*Z9?d*@HZiJ88%)n zqv`A9j2g!<$As89MT^R!3!WRxYx*gDV=%`DAz6Fer&dvvek!NG&~Hau%~+}*s|ybJ zY5+ej;8|CLFJ@JndQsy?fTO$OPK!_NE)#Z|ZKjUb5)tT%NU+5dzo^ML>#(ioOx$U= zi978wai^rngwV*=fLE_Zi`t`~)ELL?E)#c}8y0uk?Z=&3;GN=5-_4BTQz*IhDJ?f~ z?ROfUmnQCX|NF(AQj=OXcx&QL?`&|k3Zl};BxprT;V$@QPW#7Q|=$Rd--3;dgwY#dZYEC!#zsY>Y>92^!aaJVTX zRuluqcxTKz)*kqPSi4a&fJ|;o$K-&BCI+FHOVLlcsEmprOX?Mz1jzKprQQ9WT#7K< znh>d)y_Sm#n8g8J^2(+c;Hn}N}(K6N}WI&)Dni(45rkn z$@snu6mtSXL)ySRH$gw_F>O?t-2cy0>IB{=rH+p!!HI>GI$gt3>fjWgVJ-l^t1=)^ zXgG-F7?5)yO>Yq0Ny{R>HZrA7oAa$zR4Sy@0bYlv)am-~QtGVx;FLOd{y$8qGq>J( zrhpBDDRt^U02QVHT0_rmSp0raxu3U%i1R(|`1Z#s2*;pD-lhXH8#gzP6Av-ZE^yHm&lKHPZ+ zjWmi=2KRxUJEgubWNn2kva7o@1K>%zDjmLM9u9l#R zIW+-6=_OuzB03O41$UqAnU zv-d9WaaGs7zs7Tn2YcWQFo6k~kO_BstBDjMC2C^DY9cH@gpq9pKLawjtv{|0Aw&TQ z9FSj(1aopcj+2lkv?Otoe%kz-^oll#aZ)FG_#w*_W19prFqd}P1IM@ao>Hq!h zGm=IE+N90xz5U$#`G7}f?|t^!kG0oYdp)~`CL`u|SNFS(znEqvoBs|`Kr%a1&UGZG z-@@0RK;GPQ-m$JoRgmXFA?7G+%MA}V9IbJ#>C zHZh5vgC;WZ4?k2?&2&tp`E2V*fIUCvXLH=0+u*ioTc^R=*=>Gg;{1lLDU3+VKc_M6uA3qg%_G5wCZU4l#hIe-le~*)Pj_mGmfLb_R=u9l#mGI*C zr8@(GllInW_SPE$a?6(3^EtMy>sLY7IqH7y7wI!r^Zx8zp|=StD^c;=2bD#&Z6dsw zpt3|KAjnEVIN9&}=yRM@)oz`}Ajar7koRgC|Bdx1h>yC^UytS+|Bbcq=2;#ZvUrL> zqs4C_^-cIA^!MjY;@@wN?ik|V`+a$Dg7d|lpn@N6(g_3@VM#E&hf4hl`C+-RXW7*g zXlA6t)eEz=R_=N#R<<3p+y0b4?1yJxWj}o9$5ys=lBbFLiT&_rZd}Ph2(5HWlRV5@ z$qAjzAGhj{X!)^~o1a56-fbPa=A23{eQrkb(nHr&t>jzzzgwQOl84;w3}z)P)TJb3 z>F)bylD>4CL^MkIa=}8Ss(E1~Rm)zI=#U(yyRX;ehG|Gzey?$ULWizt;Aiq7SFp}s z(L=7#80lP;;pRm;>7x7RO=skMIds9&d_J58ePrO!^VA;e`{(>ef3EyE%atGJ#b^r39X`tl#7NUKFtsJGx;U-j|8>t?7XGf#hC^_h{x zJxtoHxt3{kH{wY%Pu9Dy`Zs;meoi2h=jRuF)#uF1ok|$QN|TBxzp{@Wy1=aLF|)Fx z+c~IE<&7N(3exE+0t7!A5zf0h(Oezuy?(At&%`y~Dw6USXh! zKh}*L&A#i-^<5Y5yRNG5x`w{%TKc}E!_)UA1JDM}bF;)Mn(qUh=F@;<{!1&}3Sjk4 zAQRDW`KjDwKCEYdfPSOVwtgE4M#@jA1<~=$> zIkFMEgL7-Qn;=Vedov+g$ZZ4;#dMthAh{%;c}EdEqI0m1ui!<%9yzBJ7`}v7%G*R* zBa_bP$#b_4RI3CM0O;j;wz%q-@r3q>$mzYO%UPox zYO}OsmNfTWVKmvZh|QBiKbexV+HoHVx$T}WO~rw3FU30g31IhL|LTNUKmO%VxnTpE;`1iWwae9%3B3) zj|5}dg+S#1xkh@;Iv>78uo6oM8Xzn&)J_Pq1@8^ezH-Nv>j_& z%&xKKmN#b0ayq5W_zr*0`Hu9_1En%8NJ=TS|0XHL404Lge&gh7g% z+j{NRj7GLZPIi{JMAADle@kB+abL{!vs>!_;p%zj%>T36>U&GUhKKF8=kw1G*Wb$b z?Y2QZ10p~@sDkrdbIzU3e{pwq6%em;aG!yGlUU5X?-|nV3sCl0L zG^4TG?x(Rn@~}Q~nT#HE;ocJvN>*MP@TPYNboVK)w!!aIT7lWb&OC$JN z$h!bvE3cHn*R`-my>{E9sxCm*??8^leOp6J*bmRY)$Ukwqup`m$LxpK&C@(X<-IFi zNv>MJ)a~;@&jxqd?RU12elBkwaL|~0^~y+~>t8OwKW0DcX?I-5zArh~^}+?*+4)R9 z*Pd-~%%I(YP*Vq6axIXb)>H^w2uZ*f_e@B0yM3Er!)`y}cKMl&NuBAvD=2sm=6s zh=AMB7(!4?aoe^tkF15kk)CEMmpqu0H_SOWnYBKaI!g`K4=$;Gm$ej9g=C=VDf5;5|Zx|5ubVx@LUn@Pf({Vivbu0>7lZhPc|e3%K%ozxESI;iERvl6F09AOWJ0smu32>MC$qh!|eanvEUO4mzdD zyiMQ{6OJd0+y5JZC%WFac*8G!v>h)7{YNs(irlkC{s2?m_4>sHh8r=ZuGNVuU+huz04w{ebG>6k%Ep` z0gM=}P}5!B4-GM)AItlU<%Kr|HyR71wqxF%(pg08){6u?Z@sVVK5as|D~7=fkb+UZ zUNBbPYoJU7Ku{*Y3j5eHk$Vn|wqd8RmCs@$pS&~Dc8dK(F1`U^Q_4!~qF!=^P&KoF|={nJvC}#y@Os zn;|Pd0KM{A4WJ^~cFN~+qRn-pTMy8uV826se}t9JE{-s`$XIG}X=ZUCvv@*gaS-wj z)rUvOES{80>saOK6;ow;q1?|!!;E|u#vIhiDjAge@H$8d>sCIbpG5BacyJWblY|=6 ziKq*hCZ`yb9+Y!~_ z4~VH~-gKiCXyM#r5a|{0{fZPC5(21R=E?z%J*Y;IgBVp9HL&PFYoGjF_)N z6SSpaVr9sLC+0rxc9-xqA?PbGBNguci@)ZZocBoDU#|&SOLh>?QIro}(KR&1{h2r` zV{|FZ-{;P%0L(F?FJYtIdAB&7SHB;c!YNkuta^C&+DbCXuhuDSMZeF>vZ<2Z2PV$v zUpUGh0hgCWyh@_}2DfAOger@SwOVT}aQ1T%Z*Hh$t{fJ-l1V}!nGB5JV?6E$ISEd4 z#Owe-#!l&IHit}VoRD+M?0~=agIMO7RdyDIv?bv5Mc7WU2{DhrMvrGJSl=L?2&c5f z{sQ|88(b81Pp6*4HuU~E3L80vJ5k8%b>#7O8C}OJ4 z{E+kx!Pca19{^SA5pTZ19^Re4&+SdolAFRNzBtnh>?@fc?)v!!;z(a6de0*wiX}H; z9ymfnxeQLGMMgoztdz1Jj;YGjDg@iOqJVqC+%vg=<|(my$<&g8t7Kf!1hM9S(QC@n*{S4b_!U0@(J1&zE1C4&qC?4!$QT0TPH@b5O`!>{56$T z13Z&i>2x>X6GBvDcU=E5yM1YkSgwB%@9n;7ciaZdG*-b8F;t>>Ij59X&>hG}UpvV% zn>7_3u{-7C|laM~t@!hsr)vkR)nZS>}+N-FLGRkv4&3#y9j$i+JfBlg-PSN@cYfsklcihd9xhp<$?7+?(x;a&ThC)u5kIyk*@#F33)HEuY zDi$X0swn3?k=mCc!!^aB$}`R11m2dirgEXT*hCLg^{`WaMtBflEg044$GLiN#Um4VPt?yHDW|r((6JDd0XP?Hsb=H5&7t86b z%kyuIAksWN79i47*t?E#Gg=dpg{|{PKRTL?W;C?SCn?N?CzyPrKL1?DOu@NE1`bD7 z2o;jU7(w{zg@j)x;5!`ZD!;jYIG@Yy_OEv`C%Xggw3(lJ!aZo;Sg30FRsL_&=%H7r z(>aF*w*oUMSbEZ1J15l`|2!BrPFvszj%Xx}AsCf&P&oqgi2&hLvlWWn7(xzt0M@pP z@Rg54Jv0oswnTnl^bt>SVnOrupoj=#N-)ALW`xrl8O%}h=QU-tBv+C1xN-#&8I

l982C34-KB+xM36FJ=WeC&@D`3@ac@J-zFSuMVlb zq3f`;*wT@5eTqbd$C+nJVKYoHp8L)*7?^BLVggCo3_F4}Q4QiLu^+~j-N+GDol*d+ zgz2hE$m^Tid4ELsf&kKVU__8?wnZiYJQSf|EgZHw(d0k&neSWpo~}yZHnAlNR~hwg z40#{$J{J6bQUM6FOCrwNm^pvQGvM;F;g1s951YlOOBP2`RY~V{vu`r(WzwX|^A_u# z6L;1|l({j0RNZXiVQnIrB}Jg!M^k;NC$M_F)e7Dk4LqF!agtukc|&_(3gaw$(z`KQ za%0?iR2xFy31@LwJK!AF`V-BcuEGQwe3p3Sw^}8)MpH1=NL#cFR`V01&6KpKn z^H*i(6_Zr(phD)3aPaXmF2zrhD(sYrKx5_K?qY+d2ql0FmgkW{Cm`#6-*gU7@0>DB z%R$3`bsDDSmB4W#e#2TIus{>WfdL3&gvsfc8%cHB9W!-wp;61~DUaJ7i#XNa*g~&% z`(GS2KePDOyacU6*@}ocMj_{rNh|oW9K|J}1FZ7*zXQrzXfkfdlsD-dP^LnHx$ok1 zhdJF{zr_9JF=FXbt2h=3&Z|~tg2+_rX>iy8aJ|dvGKmlcQIJFVsh4mpQpZy#QilR! z(jzj1-j~V+(4uf8&w(U}nK#A#LY&TsN|D-ae2>j-+294kN)ln?QYjaXn`y*-m4bU9 zYh7;Gb-BY478}&kVEPh1@DT-t!Vt5~(RaToCR+<|NTXsBikWZ-W4a-1s^dY^cd8$xWL)KH5+u zh*_A;Wnt2Z)p5?}#-Rg*J>V#Mi=wH=bfey<9de%2Zn01Km6s$ud^zugow=6wOQLH2 zms~GGk+zJ}He5vFx>TQgw(I9%7HOF!(S@_j(*AV)>Vni$sguqkOFKj!cOwJg)*el= z-N?rZj&J5tO4-D5rHjvJ&5@svZM!(2Qg~$$_qZAqbAhqP7onRkPc@=|aj0Q20$4ls z7@fGU6oT2=}e0K3h83-Ay2+L4_aYFLKKDf?q%ZmhNL3be(Yz8}>9O}$D*s5AhKlH#cI z^cTskK`tc{8koE`2m+AIH^D{FH6MydLa+I18hF(CGXqYG0XXg)^@tr-!S8&A`7IH0 ztIta%?2a43Mn;Q{f|yfHl*-pka>6jE?&i1#)ASA|2Ga>dJH6XsXq>c9=S+Rd4ZOTr+bBB~sA>+hG+uV6H`+A^TqQ@@^8eF2R`>f1{P9DX#ruv2DHf-S$$XjSGOqJsE+U}OTy*2qm zdg2I{0h1=*t1nNKC?@88#9JN7UK=S{9Si<2xlIk1M!3wB5T2z8AUQ3d^Hzs~s|kEA zuycMbkSkf87u*WwNb2+&e#rcAxvPx`)YvS*NjRxCCNRSc_cdUpQIXpsPHjjqMw``P zg09#4*)W9w<0(K;eF#vUr6B`^sPR%Bk@X4d=`D@2{rduEgG=KC?gm(#Ap+-O)~Q=cl^iC^SGdoPC?_(Zchqb zR-Vbs1FLQX7RkLxfx)VI`y>N#i1#Swf@_*_{oA{vllT%%0 zcW|B2WvXpG;LjBW%z8t@ZeLcN7mq%F0j9lNt=xUOk?zj-Vvy%a1;zr`vY+Y%eAU)T zCyI8r!?2(LYaBdP!j%P&{M2J0qlCBJe4C!Y3@-OHP>bDhQ&~1#mO73aU9nA*T(~q= zjJ4aB(e016&@FS&jZx*ODvesPrN~y(U^1Qk^@8 zb`$wNkJ**BJL2rw*a?&$X~6T@csrLV{{eyK1RJI1z7;C*6}*TMV@|IT-}p-4P8k3Y z+e0N|;@)LvB$v8B5hnZhWS6ppEEaN zE=|j1@Kj2Q>}KgNhIk2uTXK5U5BTxJO#oVjrU z2Qhd0u>CL~yvTw{En%d~#2uHq2iP`ZQe2)l4lpJmj)4wrzjP;;hXGb~1^kzP!z_7I z@scTC6t}LiZI=Wne9L>~WI7LzYYuh|zump^d@Kvb^&P}T$*{TO$}uh(Bktu^Y9YHI zV1m!ax`Vs`_c+Rg0!I;U#*@Tuj_Yiq`y5a>ELDchoGObmpW0Twinq4GjKYL(<~M&q zDOlr-ehj~v-L_r;PLfB8*ve`jJr)DmGr&!9&9FNzV^50h_R9dt>^}qsC zYBU20jCDXwU+ttfOna)~%+xVSjKf?oHW57igwh&1y(U58mz^U@w&)y_+M6y0 z5pw_$QtpV$3~>$Ch*L1}fxZ-=0>n!PYzmPt*&Uy5M8pQO`3Z=?H87bsC8X=AeKgH&>QX~^e^Nb!ueq$Rl` zuWV(zP50X=t~`TE$Vb5zeZdUO;2YIKIllcg$fnr4KH`1Q=zK!7N$-xh+>wQer^k$b zA&e2054!HN&h(I=HxIfHYJiHQC5LDqrp|yb!jzb^D-XSqG0?k%HU@nCSE4)`_}$Gu zv7F8>0jzhk<=hrB5PW?|;2gX;T4D(*P_s_qC+6K|1#b%j#kl1P^mrpB=_AY)+PL>| zsBVrsy9^*2AiU7I-VzkzVl%*ZNQM>;ULSRC4hsUE!-7Uw*_WN0qXrNMyqm-Hz)kA< zxWLXiW&lyjPoUGgjay9cwm5wnSUV+%gu5j_1wwrRqBAEf_!EBju8)>nPZU6n1qJ}t z$C(oq48l#%i5u9HsHW7`D3foRlVM<9Ik^dA{Om_PND4Yw6f+nR+3_;tzu@&djNql_IaIw$}?sX%q zvSqs`GP4vCvdkAuU!3kvj7-wNcjoGeNSqG2Ff@592E2{lBYItOeShZaNzP$oNB|>L zSf9E2yliVy*j&6unZfva@_FH5{ojU{bdEsoQ5}I>K<+-y&#c!$YE8x{W@oDM0?Ca@ zrHS_tFSMG!0P(5dLvZ<5^@0&fPI6u`rX71tm}wKUWJEGq8Va01F4>z!M9JwO`OzL1 z;LP`ydSXOGnJ)pqLOR4K-`7e1&R)f%HiAkMp8Aa9PUp=&I%Q`QIDtYBgLtX!!Q=F; ztmjepF=E7VTR4q%JW}y&%R5BK#93=Pw2F}#aX%z0|Arsw$HmuuevD0f(9u6vnqH{|55-Ba^9`|d0L(UmxHiQFG zgv2uUv~zrl&o_s#mFY=6MJXJ#(j~&JIh`g&O9J&oRUQkbFe8qd*NUFeD`Y70BK2F9!2}rG+XuN>ft>y8;?AFPh{#UuiJ4lBNEr zia)6()pi48Qao^@9Kn_jS*qCXwzwKwmF91Q#kFsHc&CD(!)kDjl}DO-9D7(_n(7<7 zDr)oBpP>$#pzSjP4C%Y)`?x(pnE`A+NOFQ>neY}xkf{RKQw?fQ(!_aM;0h=tv$G@4 z>%MW4?3{pI?jQk}WrDZ|4ij7&Kza@V`vGr}Hqt`i>dcH8NHqC619-3+=rra?Sbgfdg(LaJ;lDHGqOLdv28L4Ek*6umFrJ z*8zc;yAPmNPT9v?R6ss-Aq0Utb_NA}K7a)VOJ>T@A?9=nwp@7pa5BgMSX!?+EOvgk zU=5bv0NEaZ?4;MM>@9I;SyaGQ(i|p!W<28THh{J$D)`D)giMes=DR2?&@(|RVkL{B zf!zx5b^(?|z}!?fs;D_3z)vtr-zLR7o${tq@#8_i#K z$0cCD<@sv6{b!x@V7Ffi+Y36DwByEVyM2@Tbx!9M5zdhG6228a`atDyM^BGhLP`l& zXZ~q`uqtc4lUSH%_5sGuD|c|_ox_)0#R)}NWDNdfmSbU6u+PnLodlK>&Y62IQsW*t z1LvTOag4$uY-CSXs!4(@jf^@oz@(Bqs8o_puW~r1dQjeW8$n>qn32YfVQH0er^-Mo^|Gsc zhDq3ZnSgwEyKpg|cWcl2rYuw3+Bhau;2R^!LpnFb%{)jesu8eJUFDuILO~-^&a|j% zFhzKTDeglJ>W!&o!19x->6)9dXROaF;*l~ zl#wc~-uI?Xo0i+DV}l~dQ#gwuciTA%!1P-Fyv`37F7^2g71@U53Rw&#ebhgLMxg!~ zbRf1~LAgsk;{VKzNv$SBu3ABXUt5-)9&ru`nEkNYATUFeF$Jp%8Dt;mMPwp=CFINv z320NVxcfx}M5zEk#38R6xIQkp&c>%9N#WC~3xlZ50^;a~qk^t&5E%p4#;VLYZlJq! z1iGVop^43Zi~tm{TP$k|TLld!fW_Yd4EMV^R2A7M!5GZSAYA7|ac`ytQZH#H6c6q3f^%CeA?r&tVrjMn3dFQAwl%453_gYSoxj*P7c zXW_?Bk1Y!_u!sp(T`_`@LB}6*2Q#w;@5QXa8TTMk{5$t4Ui7rgj^#O{=oI5vcHhMjuKUj_>Gjdc`5ESB?wQA!=+)3H*Z6;!a-Gx9eAY<~2DF;UQ8 zU{FZISJrbHhfNgrN_^-G>xM4^oGcJ!$j#AH7@K^*&7oArk5eng{{}=kM%&G_H?!zeK6drc41s0Z}D{;Moc} zh*{d$5^=<+)LhH}<@^g7XHUb>jIb{7#k4EK?<>`#(+1rzg9Ox}F8<(jGq_p#gv_PD zSuRpCT-pBlEy79_WZ70$FaJjIlcOq&O4}83UQuo@{tClfI;YNEX&xfzTuH>f)yzOq zMrjbG>}BVaqLK1sT$qsINF=22>2c?{(sN1b<8)3(9i}p-hlbHedXBTMRSM?jbSgBd z^Qy_xwVOJB7$;10&*Q9L*g0|6uXvxo+&xOUsib{ygyQYxG*#_9arwt7d4s@ZPbhRL z@5J&Z{ijX*P<;`PWu@|So@!e`+ZVX81ceHr`!s-o4cPy=AyT(inuu z9Ruq`H(jM(&OoLFA`|?pPI|i*P1eEtQE092FZP0y$NL(6}sSXUHF0AmDvMD%L9RlVW?SJtQ~RNSQhV z2`}XgaRT0}FRvYpw>BV&Ir?{EnRBq$F`4#8(!3^7Bj;E*9SL5EA#l_ETtbSNXDOj& zoHNy_WS2NAsh9QxonscVIjjDWTV z?tvrWG>x&{QB+)^5&2W=5Vs}`6YU4Uu#&k>y=(GMp*yL)!rg7Ws`sj6jo{(>tK_@b z+AUeptN4Ssnd06Y4$QNjs$N1A4#ThCyN$dI0 z?So#N=C_~2k-h~3VGu^%MmTQF;e7dW*r;5kB^2raCge}8P`~J;VX8Pe&_hUt-EM-C z(N_a~;tpUUmC1t|82Vj3sG-Vn$vGb3juc0o!@pp{5GgK)J*kKCp43jKJa6;<)LaZn zjX2JO+V_WkhAkQIK^+rLH$o-g6Nr%mHCKD{mx=WO&X6H%oLm-XQfGC!FYu&hXUv5p z4Ktzm8fK@eai#XX{qz3Ra2*(8UEv52W%VWliEM93tqWnO7KIGgq(A3|g!n0qIE!Ki;lGA$F)CACJ}mx7>5o#O zF=O})k`Q$-qaflUW3Y&h?JbgFAooKFx^xv<6ZPg=%yKG|2*Ervz>ECk++2kRN0B_k zL`i*Y?{jtb$YXka*^eUJ<@H0Kpz z{otZFlG(jti2R`KR4165hV!JeCT=LgYy6SN{?Wiw3`3NOyJ%GRr6+~>z2b9kaGv2Ts|blOc0}jH?hKBz1s%EI zW&OZhm}xG694NdB#%+E;6Crqm`OOj6iEZm_`fm)$lEXB}*F+)8W8^#{&fSK9)wK76 zn=~)*UpA3Vn*ZE?FfQoL&0yj5u=jb*Z|8l!?yTbHvpAOTtep?Sk{~it$4yX&b+_hD zyoN7$2QK!Vd4F!-ub!5NL3xF$ zNBp~|>S?=)QYTQ)-v}8Lcf_x+2M6P~zI^0Th=2F&g!|n8I{$7BXN-ThDUe;v|4#qz z?P3oajDNSrGhw`ccU;CqKYLIVONuQKCj7fe)rE;(-oLwLoPT#ic1E(Hz`t7;lB^UU zkFv*-6ePr7h>RLiG8LoDHAPOJR3I2-R;#rLiqV4f8Z8I}#k$`PvGl84j}Pi&9QHRu`>p3#eQsmqyk{f zGLU}O(q%K`Et1Ed?2}5lI<1KUDqIK$y)|KHpEMx!`J6N&a;NWc$!k9ZxyGXfGEg!%>>Mykkhys!$OLqb zk0C5G8j!sn3YiLV;$gCgU8_^L6coxB7*1rCgRCFm;9RhcA>yj(FB zcP^gHevK=#jNY&mBYIpp$6(sUm_dziJrQldNn>zdJg#x*%_tm``awA?<{j>ZkHODE zL_U6Q`=HT2#qs5llZgoaD2r^_}Er zA{93NSNT{JW4+{Oj(W+@O}wR-eA^bf0+0lQFv#+fU$p!`;3Yqa3(%;O{C%c(`N@Mn z#X87O{=W5mGVdxsyP8ugeih2%&R&iq4G6;cpxJV+Z3SlX%fljY;vz!(04mNW&Jy1O zaem0i7b03IcoO0?a~Rzn^67cp-78Z>ZmUk8EL@RD6XHv(AQua2QuwDRB3?YHn+9*k zl(tDuHYHMg!o)zvjqxdVVDpW&As7Plz?*y{L};qwa&br3Hwa)B#KZn+r`y;b9+vH) zv&1(@WH?hsL{(t|dhkL> z@vRW|5;}^B5Twi^ZcWLOc**=IjBY+8l}X6w95fcG-EfJVdL}0kmlXtSjb1NjOe`|y zDptvxim#sHfm92wqH2q^3R+riWPvExR3JP4AR&E_9kUvFF|nzbAQS!J>#Qj`A8qrv zqM(sx6&w9Ox1BM~rISB2T$b)ZscL#56gZoP>l7a(#8km6;1lc*ubzbB^2q3$=CzTd zis=dkf5ePrjH06`x2Nxz(^Lf^PlMYB~bnSxPGZ8pLC6j53u2-EmQ&U zKh)30q~R3{&VqzT+f-#@HE{JPN6Y)46sw^jAFCnGJ)qiMT~&EJAFII+Hv>E;fM?m` zVZa@d))o3kJTqSi<$c)k@#kUTPq@yVOvB_*vj{eX9rvOLQ60FS!Fh%;UN2b_aj}Gv zd>Q%%V~F>l@sW_@BEn^F8FuGkoexy~Rqu3$3Ie(vHUZs?l>n^+XSs)OI^TS)1zg{& z0B@W)+`bgs4V7yjcXN}*7SRbzAN^wDBEb^f)BX*`?pqTz!QCE#Tv!2l5`>K7BAi&@ zsSynwtjg43&&7}qHApi&#s(!qkgvDkcmn3q>RVxryQ(X8C^0g|uuUT$#FIjTA%M~68 zBujK2!i5yF+rMLEA1vMgBR{N95c-kcx!mlP{6*6*$;v^x^x82ju8e(_=EJ#MC={`q z*cpp2L|bLIUyHc_|GR?jo9Co_6|I+oq&Tu4;%tZtPIZq`p zY&YDv!}r&%onY{F13xTft$VicoXh}SOS7I=o^MY|n~oBRV*Q0Q)Wy znA>jJ!g6A8c9fqHz4`xBmj7R&EEjbA?#l92W0mFK^_AsPyu*Oh<{6L~<~|D+78mj% zxDogb>C;EJkwRVsObDIFuGi;6hzB;xh2&WfF(V^fi2DfE!T7!XC$J%g|L{4FJR9Qk zC1`~W3nFGj9Ed_F{9f6RG2Dg;U+%LYVAIGjb|ifHu*=yvHssAA7lN3Pk7Yx$#4Be< zDxb{|7@@7+upufinB4e}`}oy3==zQg+TcR$S_K;IM?T?W*Uccvm-J-374#SA2-NfY z@K#W7W4#qr^84~u*ki28u$McX#p4`Ynjq$ZnSf~Xudxs}>ej_&1SJLK-w5u!1Kjx! zLYgBk3ZGamizFBgxhMcPN%<%s_mBh9zr#%dWv_T*2&e)cNQU~`J1OkpHQai~Ix760 zofM=59dS~Kjd4<_Q`IZd3*o;|QQ)P3oD%m2X)>tpb{Ex~I)X*Hd)%)?DK;uzcjhg| zsv&L!Xl~mXk*2((LWaM^P|yGq*u0~HL>FTn75-YU%t)?qO>i#kg0z_8IHd?H)P}hzo7}yR*{m8gkY82-b7u^hb^p_BK8ZI$8qHUsQ9btU2#7I zEBBKaYxaM1{8b^D(fF%+@^3@FV0nza$5JZ6JGbxy5BjEf0*$I3i6_vcC&`%~OzKZ) z2xs_rjwfJV<>KNydjC%G1V~&a%Ui`lPVjXszz8CMgj1IPrd#BfSd)NNKFP@B{FjZtrn%*PG4O2p55`}6 zhy@uRf9*lajMzM4;;$vqI7l}_{58?vw~D`pf)y!y6I7TejXFa(j?b>+4Ar_fEtd-7 zz3`VnfmDWq0>p}vz5jb+0Vn9ffZczESil1Q;aI>McIwHeYewqq^Vi>}kd^7=N4ATW z9t#A{iYOy#^{DOQPPG`eU1W(B$I=LWNj)%Z{uZ&@*22q+@)(Q8Ze!8dJX|zv(RdF9 z!xoLzA2U{s9nL%%tSn4kx!J>!5Im_^w|2Y9;RoM4`1V$fzlAj;$qW!S4O=rd$(peV z%QZCRHr9++jub;o`mGbeK-ow@pky#dvJDe4Vm5;0W0E5y zaE|0{7yFDsX4nM72@wkIRav-~$Zi?4=_4kpW=xFhf<^@-OYPF%{VoRJoCr~!n&rdh zi!~^Nee=bddc&n2!fMf&w$Cc#L;$s6%e}E$;=EDQMRH5~XXBr>uMPgW(6(;&MSvqQ zmti=6x0uWKC->9k+lF0+-IZi9WaUFI7ZM4DUCxF-Fs>-zzV;STm+wysge42S7Fpni zoq94*&H@2_bFOgrBWt=9uMJYzTxX0ghwWys%zaI?)Ih1R>uN4D4|$`ltNj{dwAHkr z{FJe$A~9Z5@=BRacNG4f^K z4(vmo;%O_b)$DV;Ci4w62l#4Fa%V@R=bv4soNu%1(dWCf8*?9K*XWSp)S2NNW6c_q zPz6-Y@V1pgYIv$n|9ZU`6tUB0s3ABM$@GcL-!W&<1mW+viy-06)h0Yy`We8V+&RbI6?gk1k*bL?w$=@Dto|v z_Vi%onU+&g+7w`#1L@(FT7g{{z?RRIZ@fTVy*atxYroV4S}`NJFCn#?4A`5 zY#W3HU}cgTRqh+qj>lh;jmVCu%-gJe@){f34tuLtcsI+KI=uEXyd2`oT2@6>DQ4oO zUd6p${2ofe%-~}tB9FClbKB6`YrxwF-FPxT{xE4@+F)%Met1e?FFLRR*n_|zD>bbF ziN%7U=Di|O@-+>Sv%akPf%Hy4HFx>JfxfqZ-}FnGY9c?@>IUz+m;i;cQtyLpo!(uR zcXMd%pD<|43|b%#f&t`1p7mv>S=`p^MZersrhwW~i;?#rnC@nPO9vU`h2)-oPoR&d zA(UwECXCLsXfiWrsQF2TX=#`i!z^w7+w{(G0cI)8Kaix+R3GNaedjIK_ymVD1o_@a z+d9EBA;!s1*t<(w@rb>tOA9=!jA0YF7hnVQus_yWl}T_53drcaUidyrp<2Fvb>XR78dIc0zYJie*;Vs3bGmY))F2Ec?<{R_u5Xhs|6BQC5QYmArmX_*bjFA3Q9gfj2GCJ? zqV}W?6>Kt^6nMuj;43|%2M_($k@tNuMrgGD~67y?_LqycKkEnc79ULKlaRSca}B$ zmZ{s^sJc78?exsTegZ~eX7~EF@gkbpt-s>gn^)1++x!>af)yTnp}d-FU3MYr?qV?` zdV?>)-Gvy;Sbs-25^P;@P{0$`5z_ z>U?jyMQnkV}x{ge%Utw>&2HcnXiLey?yNCLJjKzHJ z0t(^qm`_^;$A|AX|0wqf3TYtzGWSUzt%<&+U%DmFbRpswPm#wIs~bpdw~%e9U*R)o zoVytm)Y4srz3HcnFFSk4-N9o${A~LU=3K|?I*O?IKQ70zrSAUIhxk>*ojSf^_#108 zPx4AL_y$Oz(@=lF<;$3)k*;pj$LX8;sp<{uyH@?sITw(r!P0vu@%y=leyZ2swXn!; z{RnUH)IbliJXwk><3hSks6~(g(p!w_6Z+^cXD|;RLE!&`m8ci}M_MMmB@wUcAE{IF zgBc{^Yn9}U_haR~l$Mqc(Z?{Vi3AS1Po6%)d)kO9@Ko8rB=847q$CjH6@=7~VP2lC zdneWf%a9&OrC-6ouxpIJ6U?dnzQsjC#AU*xM92)kOU9$81N&CGRTG3ah`!6f1KRx4 zcy*Nqn!io~u52JjN`=CzfQqSsm9CPw)Z!jE)o$x$b9t&>znZ1FpL;QDCq!H~t<`L> z-S%l(q<7w8a0TC~W)f4iM9dhQ{I3o#Q7scsx>B0a zO#?ffWaTy;q#L@6^W!rMK!RsIq*bAKWZN-U?4NueO@xS#dDUgSU%Ixb>*#s>p$wjw zZI}*ZAfc!%`bf-+-|KxshFnWgI9m656+bbCO2xsJFIF&*B#g>`H_lY z5e$D7f|Y&&G<|*%*Z(#mM=b9+cCGt-t;~70Uw0>st#FGMjuSV&4Lkkti3xsOPuc117~1WnWB5V>nPUAf&DyG z@YPb@7EH^*yYzw6zC4_e50y`@d0*S%wQ={wY(Ft#-wl^EJZU4FIM;NVF*gC~p-1Lma>Ue;^-l zdTrf=rq87FiJx#c)Y28XjXFJ5-r|H?ANLj~UE=UBE@tVLYufeZh?>o<5_^&B7B(3M z$d8&Ptgb7l1|Gg}9CE^>6M7@J!pA&i`A_CbPmfLc?BkE&SRuvU=XE0BL2qvGJ{w#6 zr@%-eYu)GSO8IHg5eu|1scAYZV+D4Ae_%fCt@VM^m` zDMi`n9Q)zPD*>>k;7WHgyejN}5AFujs*=qQrFVvWCiI86?i3Y?`b9mU<7*lS(+HiL zRB&>w0(yx~_KZ|y1^L7sP=_A>%Rq@_Lebvx!rPoRiSnlnFXKp@` z-WkQHs{r4;iJxPMy!9G8*TKLJ6JK21qwXfajkloA`<_|igI;s2X;M#(e8!7f;nVKn zw`Zoc{w|Qv%uwU!;oxS*1LcRyI|tr>x<{>=XS)ZwauZH)Vby7LFq zFR-w?ClzsO(`OS+WnR@cep1A|PxlA{ns%tFC$RD-L$=>d(~n1AeR0CT_xKEaU7k&4 zfZO)p`)%jP$J@*}I`96rlYV`IJ+sT5X?Zn`@Q+gss#|-xVGRpWT+odJg7m-(O;@d7 z6EE`f>kW5qUJ$(YRQq&ox8LZEpO;MafqdXDg#;7Xak2nJZPmRz=a9_;(C`d&Y8N@&?&S0;TPrzGc zd5wzFh}mMe@Dz(|&zZPnm8pYEaj*t6D$-R{%!Xp}2T+zTfwA8olB%B*W>Bxrq}KjVRJ z=JE#&zLCL)89ZE5wBYliHlv@f%&qMZyzzc@C8&GN-{p?cz})u~U_9h54Ob4@*`xV| z#5=ypFkzwL^)!Q+p0(b^kW7x8(Xm7W-P4+qR?E8?&C;UgQfjP$^H!!mTGX6i2wKbI zYmc+4m5;93r3HPC>C^py?SH@WIbXW3C*_d@=h=e+IbfPfZFekqe5$d7pd zob^$j5A&S=Y|omP{LlV0JrJlox#qj{?FUKEl@OZaPzfXLdLGgX(%Z#r*pl5tSOCZo zhNK7W_RhdwKOo|?(j>wkd*d_~P1DOR3TS)E59XK0>|MIETKko~$=uo5+)&GhX{@+m zUTKEEBH6l$MG&ZX<>{7pK>1;Vn8Ve9^wUGyszczbuIkEM^U*Z!M6{1qTFK@g@J9?f zlir!|xlKJjhg>iBA)j)^Dxc*rxiR|-i*+%PV~$?YHnX#qyEJ5PN{Fnepb*A>JJ@=f z{>H&p4@CvA_2`-omKW|iQY{G!u=Ni#7>U0ebDu@#n46Lx7c^jWGQzjq*EhWMi-|1k zt&OZ-g^!L|-i0Vz7f$Hfo;*Y41W#1Z*!BFxt`{bD9i5n6 zZKXTou9ft-7a4%c-i3TqVF+W{&&lz?GQuN?No|ZhA9aV`BD5x z86{<6+n(V(d$XDt{w-{28RvuCm6lg67ux90*ot+uPGo(nHvUWwtOcLBdjPZ&Ryxod z=mekuHTEIO1?CbqC}wZ^5>V$pTf({_YK~>&H)L=5G+L@-cKhK#zp;kUZRZmFj5d93 zxM?W$#+Vk#%6<0y6R!1TXeCT%*lvA;rp%92q~QpNEN*|{c1BnkPOiCKpJ!AQmH=fi z0P#zPM`lL!gIg0L-R)!=+BSq3#I#g3DS05$?0wPnd$9thJ7B)ww(D_Ct_Wqi{GHq^LS@ z1WQ3C`W&u~FvHo;n!rcdhc+{&iJS3%p|nC~{9F$BGXh?%>RN$QAO93jWPnkD0YlVP zr7XLx2ueXo8SN@qBi%6M_mSW?r1fB3i0GzwfD_9_TN_PQPF{PyJK5d}WMwW1bm71U zej=G^0NLu%z^fZ}Cq!%LKoJ})3tA9uewZ$bK?#ZV+_EJ%E=!0X*XOew5v@00wc8q5 zacZXu-PKdX<@;yaz9w?1>dxyQeipN;>tE2Eg@~51JX^IbFyvj4brONIDBre5Au-(F zqcz&zGgk94R2k_V)s>GnKcC)Bv~I2g4b6{j*eM+2^RA45^<&QRv0uS&)j&48-2~b$ zm#j3IdqxK(P>!fY^7G1&shxySGhnYjEuG-@KkzLaU zKIsSV zCTM*%TeZr5coG3CjF_~TuH4dO{|^XGL2*H^&40(jhPAL^u89?P+n;N##Sq`LY{%wN zd1*oZ=sfC`MCulQijq0quL&_r-On3`pN+cFdQiB`GFpG|I z3q8_ws1Bm?!1u^#Bv`>!v{v&L@F$~Rg;Y(bk45ASizg}a z5nRwjH}hN8uTB=(tzYsXy9sy`M7Qv3YFYo)bgEFhx@J}JGZbu0?5d1<@@fvp3Yr@M3cp5f73j<^l~8Uf6P%G2P1 zpF{fPMTHnk=6ZQxi{sh)Az-S3ye1Gcj@Kl!@u{cy6Zoz}B7(R+^(4->0k#(H9SMf4 zk7Kn!d(6WF-G)FBwCBUWVTt4y%CmtH`fomDUkJtq#y>%x)ET#jHjD6xmu-G!aCs$g2_&)XOM> zvRb>t3T9_az%Fu;W-ja(f@p_PI!1JEW^}!d7Co*Y%_R4Zsc50S^*sprysFKC)6kap zs7pQ-a!=Y@mjr?p8H^RTR$R)1M0??2cpI`1&}P>eZAzHa!CMy@3`QQ%AV;O^wP4n& zMIiBT5$DBjyBE~r!j0u&8uecP-CVFaH@Qzy<-^-l2?raQ_6oD;W-ewb%bYxf?HS>KU(>4cJAT)Kfot|PyxadU{rxAQFjUY0tL|5b`Q{rD)3-= z@4y2-VH_hL8<8(>Pp(%7=E7UJh6GJsP1HQbz1hTYfDvMMN98k!AtK1>d6T_+ zv8UR44}Ty)(=!6JkDDJKhO48hV}aJ|$9$)M6=CZo!P+!~S!CBFj3f*$hzJ1h0%gbT zjptFpO2jmQ@?&0Oyz=F>lhdnXMfUvt_Iz`p>P%Gjwfs^c&;Ch0PbY+d zs5?9AVHDv_54p2L-gIUZ@oo!wbEvbt_Zd(FxKk&x6_4^Vwq={V+akbY!keQjQj(B! zM`e~;hUWhHAlNQpZ&IY}$~|`Wa(NBa!d4(7TPti`T7IhQ=O~7GuP%FipnQlwD%_JAGrD>{nbarg zNdP$maIdcHUbmLNr*i(P_)>8;yvtG(El^#uE*QR72!Ix4mHXFC=WiUkzQVG|b~$c8 z9K9NeucV-f09=vX{))--g^b*!88uzm?N0`tU<52}tocz6K`}bwYI>{y0E(Np43qG@ z{QS?fPM|vOb&ni4OAG_NjI%B8E`k)S=d&!KMCuE5A4ONRpvk)&iDt$s8D2+-$WqHa z{^mls@_Zq$GnjgN<9e|R`E$Xxu(~%jx=Uk7u|xRY`(a2#P;6ZXb#{^FhDAp7EWb>-d@*rRq~wVNHv{aELAsQi>M9lAoZ z_D{hv1fPwu%6;qJ>+VbM3Xqzw@>x4O2!H9G82BZ7ST977+s5l|_rS9to-yZL>W?x6 ztuzdYmhd}95+3v=;X2bt5%_S1_nV&tZ8_0~>@;0yq`4wVu0)M=SAJL>u2-AF4&9kC zw`U+^^ydTuqG13fn)$foQiW~ntqo`OzB{S;35mPbuf4vgX_PP}-E2zMDyfg$@DhQ53}p>qG9cs5_H^*1_9cn$C;3cV}uYDJ2y zz#cd$KyAl3{q6$T;&Ap_#Ul>6doc5G_uP=$zr#H>ZvQwLkS1{vghFlOi^7k}=!6k~ zc|`d=72}2X!lAO(Ud=gg@i|aR$mQ0`6}5lbr{Sr89YCF#Ux$(Vw1mH6@57UrweGW_ z+=Vpu$1i>rSt%AUw~0edf>JYe$r5i)gr@{=B_=VZgx&sfTd%$8+ZxyOc;%d^J#S9b zyUt1-uk5ntb){ax^lpAPBy-a`nq==TEQ`EliX$A}@d2~|K#Pse^ zYIk}laK}5mnH-BK!OV?jV`h&Uc$vdCeU&Ba0hHtR>@)7bX8Me{@np7i60^1X{}>-D-g6H8 zIz3c==L<%nI+c$gQ5F96e2MBnuX|{iU#REO`$1y5g8ynmY4rNp8Ig!M_Wb^viR8O5 z%tU@Nxe%a?JdKfH(Fuq|12@;T9rlSnB%iMp(PPtjZV)qJnT%Od)FJ*vAaNG62V;a*^S%Cg!p(S-13Ph? zys`EM1Ea{!)WQK>i6+mC3cV4+9+%`Fi)zuHxHD@tZ_RmSULODN{r)~-@89M7GtBpA zy!rdeK)|g4MW1)0W#9W125xYQng6O`bxzj$o}uk=uez$|>MG5S-M0pk1U{>`f=pC0 z11o!T1n3BXzWVF9E~Y+J*EZDr45%mWU0u<0wb5bn-o$}F*o-BY|DrBgR`xDk<;{yH zr|{z4b#2F*pBWyl&WGK$T2$z6^zY4KwsGJOyme@lo32>D?#iO3liAtDyJugi18DK} zp(SOew)q9`?%JN38D_jg&FBA?FZI;a>W$oaLZW&2MI9u^u*3+_h$s6ctns13Kwb&^&9;U(kge=jrYsqq1o9@0BwH{{k(_7?oG>}#|iwH&uP)~#OnAX|0bw7bOx z#_v3TT20u#S5_we!M}{Z{3BlztK5Ctq+m^?vgeNS^><&%#qq~fuD|=eEZrCRYufFx zJ3oaG;PsLP5&N2Mw?@_rPrLp7-&XX;1@X$K?)X6ElXo5qR72F-t=c)O~~zHI9< z0G?uYxx>(6r&qDO1iCO7#B`WPmts2does1OuivF~ z9`BhRHEpK*h60!B!xsZv@qzot(f>u|2MZ!}XjYAuAp>1MpLF`91czAR6v3I+*>m~F zomFoLU7d`+0eSkIq1o_T?XrgN$JR&)vF)I{yQ#MPnCM4csvqwbsL2^jg5K&Soga?$ zC0Gsw-pGdkhl_X{nReyg=2zK|x;y`g`TM+&UY8K0+KVtnomM{T&&&W3`1S4P<4H(gtPOz`{L%;ykT`aeFOMF5@VbBz5dKP(+C_Z>;-XUzbYUO4bR zpPpCC0QL$mgfZJm4}@GBw%f`30A1or{z%{n+P>h;s^w?Ozz3nHrhUqbv>kkNdyY}p z3zPD1J!ATpgzEz6GF)p%(O!5G;dx0?eGy0*>)*fXJPuC3z45r<@x~c#hnphhc@rG>@QJAGS>QDWTh-H>H-2|P<32ji^AC04oknob3i`eUJSJ(?sz8s(1=^iFx%j2FP1>Xu{ujGwFsNiF z-lt+5tW~$!UJZFBx$&0S_x?|&A^Jh2mevR0<$Ma#tv+f(-lrno?Q!mUJHYxA-l+HUvmnEP6;6`=4wguu7$5BVz><{vXPyKT9_ zAGs^|@pn+$=Wi32IeXJNM&xf4Tl=FHP?i$rXu6tMnUIlDr*NI|CGk0Gb*zUfXlW`I~6c4o1uleI|#_(gZ|4C{KduI8J z0c2Wca6(Mt@1Ugg7Vod13_IE#cI)d}M~Zra>%WNTqQ)xws(wQIzowsXk@<-yeej!0uhE`+vPm4cB6V%47QI zb5(PjF4L48bTv%5rZl}1t8`;_`R5H|>qno%h4xPz4$GSWa{G`z`eys}^3ME4GcV6LxubA2n>VxF#ot=B z#wZM9zz&$2dDg!q-LLI}waur0jJ zgLsXJB!^zH|!Aqq&|k;@%?Xo$D#0sarXN@ zUyx8g<(zcL(EXk1om@^kPao1${d(~T??|5sHbn%>bRO>x7y0}H!qfa%6??%@sBN&N z1?|S158a2-e;kf{$5FnrWYgrHiRMAQo|({e5&i&8)41xG_ix}U|5W_YcbpAp^>5R! z;6Jz-G))-VkBrDKM7vqgTJtRyd}^3lOP4B{cO)plFJrpJz3f8t=fT+_VxHe4@+yO+?r`NJ&Cl!9D6Tmeq{nU* z3y}@qKrB}Gk>I=4fjf7*3o|4Jzo`HJXYWnmqpYrn|7Vg3BoLe+K~X_Q4Vp-x2}B?o zB#?wnf&qe{s3By5(QGC&B&a}e63yc{m{zT}wUtFHZEdTq3tE?iEkIpZT!Mh2Vx1w1 z5tW2R^Z%avJd;cS?eG2d_x}I?_wzb%@;rAt_uO;OJ@?%8*+WE6=F8sMuj{kdhfa#r z)2ypiBoX~VHAdOO2NKnj9&V*z9lMF{nZ2HKK4QS93SAioSV^|k?i4b@glG#4QHiK^ zHFn-@Mjzi9-8I6K(O@V%z6!fZSmbkF53L2?sIiFH!%$_=(DGL$Pww_q=QdA9vv=uM z&!B2(lP+7bN+o9{Xc?~?BxW?YKNtH*p-vL5YW1B1c13Ec^ViVpe8`ir)$H?$)*PIk z!~r_U(^hk-^m7@_p?wr|YUECW`P&#m}c3Zlz|WR?N7*+wiYnJpkU*1bUik zNy!sJI;|;8Lg2mTn~W-ud0=bpg*e>@T76p(fhJXLcxZ8(&@hAXUn^x@Uo?NMW0?GL zw=-wGMv}Dmwyi7x*J|;Waz2Rf>N3-D4-U^*C$4`~i5Dju#uE7-5}96;CTy$ii;d>q z7`ftvcvfV2dV4CYUgi^4IXuiStP+{GJwGeld$%~)@M^1(D=OT_?Y0`PdI`7HWb-1@ z1p``POjE||WUTodnAm};Q+b-1w0IGXj7^?d))%Ggb#Dy!-lZ~ROVKJv=&W`fS)0Ad zw}kXYlJecFMU?5f{>p}Oo5&+=?5aWHx%5$0XWpcF-jwGgUrW0TdYm74GBnLSHTb4%un{7J*I3a8HGfBH{1@Z4y}&ZU zDu?ZbBZV+cKeA%G#_7aD_tH(8ZSs-0H&+~%U~lH@97W6AM0)@!=!bzePS(CDlK z+g(+HQC941&$AC|yZ+{iH|3aP%`V&IH;1Z}d~-JQbufWP&9eBWgQ4YRPZWMb`-!hG zcEusd&~hAhlAG^xiSvj@wHwPZ&v+~44)=@?XD3*&l*@h$X&m^yEK{O6u3x5nYSn5hK1hIt#Q+7Rw^PvavowGxq$YirAv!1%IHj7Y#XXAc8^Q<%6BJgwzH zQQU#{m9lyaq%>tT6T&vm7aN62-tW6;-Ad+6HSro-I1j2Ju^T?a_xj(md z^dEy$Z|dluBF`-y{j=nm@wPYPfQr3HVrLv2dDDT!=EU~IR?>{jc-zR~0(QUdS}XbM z{k!D^KVEwJyw}p#Ukf3un&F0CIbNN?j!f8Ry$zbf>=kPr5mv2%vhgNmTiaf?*0DAo zmnTDNNlLT!bNo~(^^Dfll8>J8O-KJC2!j|R4ZL=(qoeAcbzSoKGMk8u~{ipZ0*CifBYNA%xkR{0acnjKPHi#7j_$4J^%2|}GFvd4+ zmSLB3L_l#yXl6X0A-$$S`)VOwAEf@G>=bK^k_jcOw0v$Q2f_a;t*e9e1T}FOSP#=b zg_vkX3|BS^J)8-=>Et$3pLZ5Zv8jK6O}j9tL)Z}8t7W1mJb91Pu5Vx^i_{|SUAdFD ziOn-PT%W3}u|qRd>AFQ~*~3)=GsAU-zh#dwqKiIhVHuHPh)paPqt6u)U|qhl%C>C` zxEH7wV!Hm-6ejEyIqD=R-l&+C?PhdmKO>Ux*+f)W-x)jGjJ?;ljef4>AyXcF{}9*1 zo$?f#nzCX{RtDz+!Z76u>kC&@4d`vbXvJcc^Bf-Pvv9?j%p1(`mN!jAX8AaMFZ;&j zr0vWU+Y9AAY%ffRu06`moB_@Y5_i=z|CPL_vS%pET>mVOWFMWoAvXC)Ik#KL07jix zQ{p6h858uB7~dtZ*WDgo*}HJXSka5*+#CDYoNugOFMhs>2m&hZv(+i0s_Vti_Cj^E zdfd{(dt=A|W}D7xX)3Ijjc^-dlMh#1DxHkj^w=*V_`VHUBAKoa1o;Ohdg5;yn0R!a z-l|r_s75u_7v4onPxmG^InUc@&>>q1p+h$BN5OfaW0?F=R?9~OO6-kl;9#;1d|k-c zk{`h2G%y`jC9=KnNDsk6D2=T%zFHf0h6$}^{#P5RzA*Su7sLl|wq*cc`|E)wek-xz z=!DDc&YraTXxT{JfY}?HytUlVqO0K2-&GG~FLq{T*0)j4cM%%O`Gs-?25_&5baIBZ zvz|hcANS|sMiSX3PLd(8Ch|1aY%v1QX7;mf2b&{clZlnnEl11-uJF%E?2svdt{Onp z1~?;xujqsvlMkZ|e163T&(qZ~ulA_(ebWjQw)kclQMT~8LSgL@re9w|{)8VJqCHcw z5nSvK!a#QptlhiZ=ea$SJm%fJqDe(>&oSx4lMOQ}YsIhCk1H)0Y(I)VLg{+vT6|X< za=HKu!Ts@v)yFek6XkT2dY|RGlJ^kxew}ML@1g2F&2=&FR`ov9#cs5$Fny={qYtZ( zWjjZ@4<%F|k61iZmp)N)*rz1G^*dM`qxzHiM!R1tbSXVZ#E$;yhHq_y@^}5K`o;)6$rGCr1lL~_*ilynLm>AKR-I8*vrdZYXE z$)Lz0uAOH#&lsL_dB*a*aWC5wc#q%n>2E$fu)q1}CX4g@qnoU@8mwvQzQ)KXPd4Sn zB8$<4xNbCE5=fY~;$y8Ei~UCC{Q5D6BU_^6ka0ef#4>=AzCB91dzQfQp3gIyXk&QF zl#d$L`)ce`_{sA&9^I7cyj(Dgm8mjXzwtFx^skLpAR%HT%3kx9`wHt-4Dl4LukRSr z!TyP1SEsT{T8OL_s`(S7`RL|USGeZ}d-4r2%c813wY$#sobQ=xue0{X6PsM;uS{Ol zdwS_s*%~nr;;p{tuc2I0nr@MT+oPPPcy|^j=surDQ3rBIPy+QW^Sx?(1yQn4=zAv# zL}|39sxU^|*S0c@;pwd=IIfjZc3Swd9!Jx{tj^nMqq5Iz0E31swrdRx382H1y<@50 zgHD+0y9<;=8tQe1Y5JF(V6(l-;r91^y(o8bo9i%pNC#M2p4H!9ZzmVu*E9@rWe+Ub z%?e-snK4~^)5fMW*~!q+ayJ`rpd%1}WB2&3&-@FBRX>O2wegWgnN?|+Xf;Z+)EOwr z5GjdkaCdwar{Y5)4M#tA(k&lRa38j~z6hdn*?9qSlDa2f{+TE{^i_cRXUzV@SpOVY z+t4&VQi|og+T*Zt!(*QvQj%(6|l0 z3rIw#XG|c_-#e^rn>B>X*0Nm4Ozpc+c$i{_?eTfZ>#ileeCi9k^dvtS@ljCuB$hp9G$4;XV)=w?n4$!t3?#{Y&7ecUj1miI#X=x8kBD=*K)u_rU;< zYoDHZp!Vppi#P|i)k0fXb}l=oq59cNg-kh4*0^PSM*?fDOAi=hcKAZHY_<%{KEU4T zG%KsQv%;56{DT}Eb@p%{vf%X0ie&R^T_ZR|XT^D#44B$M%xl6q&}=q}4`6AKxGnz- zWb3M((}ZhfmMz+_AKmoXSW?<|l#1!yc z6DhL-tEHJ`9N3~IfQVp!JsvFM%;ur`cNuT#Z>jdbk-o`&qEydlUVpX-)a-pP4d7`@ z-(Y)a0|R~L0Bp~{uV)_QvxnY+`+G`lW*iLlOo`OD>zO+ew^2V+*fGyQh_U$5O;LKr zRyI*)gcrK2qzPO>Syfm#Tim806K{LRtA;R_b?>-Mo{ZOfXYA7p5Q=MrE6-;(>j&H) z+3Pa*wG678%q&FaLGDxd^Y^>IJlbftWwhBcj_b!FzH$!Kk5IUa-uF&Ts6Ljw_-*%w z(YKNQzv@klZeOc71!5NaY8_ z68S%nobk48B?g~H>ty3eMmXp1%Qz3Xj|lFi&85yh_#I6R?Y zS8~fZC^7YoL2$~Z`scd*MtTz)yq zqUzss(?NYp5Ryl`kPw7A+v~09uua(*x5ayNhhO#xxDSUyDCbVpFxB>aMl3e?+al8}1r$xU*r0xvSzk~>cV~9xqSVQ>5!sB+SCQEXgU~zqGlB&q|%Lqi@ z8famBhFV(KPXDurxT0UNmb*+d1hFgp=tQcbW(*DxBK7`Z;-9e(jSV4LAPISfixR(*LYWUh|*S4+*MKE*=nlcKVKt{=4<56 z*{pBt1#g@BeZ{vT)}q|K83!p85!Dg{)`(R`fUdJo9F27U8lc^l|QidC`Moc8#+0=-GyeX-Uaxn-`Z`#0DL>*J= zNSUUvJ%8@{1TwDKMMomG$p#ev3)GDC0yWG`YO2#~HafkXdTZMkrXKfNXC`lPy@r_< zsqc9S)SB-@(zX2AG*MoJaUGIv98W=Fs~OCj(cjlZ^Xi=#q6AlHX*(o{l=!-ja}?wo zBuf;~S;W(~(z`ZTT6&}JMQLY}8N5kubP1#Va+yw`gZu6qL^sJG8zA}})7eEW#t zf2T`qNhrnlZBhv_SeMP%-^6bA8KWdCPntwI#r_T35 z$Q=Eh>t2-#p7oD~g@uK5gVdOO&VUW*)EJI|`qs7$>r*puI5}6%% zTP$t<#uMVt2Y`2D?@o&K%#q>1v{od5vnBJICMm6p1VkIV5f9P+N#|S1(gM-t5D&AJ z8{7x%E4GW#Sr_oj5_TG)YrYS-3_bZRbvywehrjQ3hAFIjWe1?_P`{HW}2Bh=cJ1QtqTQ!^{-V7mL( zNK4ChLqBxmZ!@i!FEgY?s;df>ymYer6Y8twiF(x|*j6S`6P)Hu3-`;qZ1DWFSphOF zQnsgo77(i@Mhb^$8HHTzVyh`-`axzL67+Xh{7b9GQM(TM%;^&|UYM=sdg2xGnV;ph znnBVPvD3VXeGBv=NEjO%$+n)N~+W4hf&-)rooL+MulUtVPQ`>NJiyPmy9PR$Z9tjKMe-`Xr-57{{vNd_FPt4=wH-_ab3?)ed>_#d>01zsq0-`=F^s4As4w*t&Mvqi zO5?O!&TH`A8PbE{jOaCUI3vn#XB@-Nhd}bG$lZFSBAd{8C@@1E#%v?w66c7? zaQ#GdWlzsdEMZkGqW-1w-Hi$UK2kjTL!=}+8A+);=V%7KZWJ*^aJbdWruc)w7Ve#8 z*%CV3-Jw;6an@w<052D#!UerqPSI$%DqHcdY~k2lhrgb@=?B97f98et6=U|uV0-OK za#fW`32e0&@K*vb#>7wybj^;>rRq2~OZVm8I@fo-a?6l@DB2;!ImDPaGTL__QIZiU zAQQ_!6A6ZG(UmbRQ*1A!4dlFWAp&rzGs?8Sn1Z>~cN58yzjI#Z{sL1jgN2mg&YRrr z@y<7}>ON|r&u{rCki#yVNPMRSBXa>Jjak0uBvAVGJ(h}aL`a&zuY7|MLieT{jkzLI zKAU|J^jt0XKBA-_iU#^Wge%Nf3iqs{-q1R)<3+~GijnhjDh?iYM8!8*Jl-S*-Ld~A z*u1})GNmw`o!H>J06}iK7k4UdZcXbgf?X*}j2)wh9UBy7J_Pw&HjGKBF~jM&lfAcC zwuB`3&n0(7mj5m>BxXgn>{=g!eEEy%Cy5$23VxcoN~& zycR;Q+<3{#uJRv)f1U9<*XO@NMhDI)+pAH^!eGvy3$zyZ@s(Xh4|2f5WJW_M$ZiyQ zXYlL2!=f{swAIvu!QDQ@R{Jn7W=@H_0_5=wkQ+s~kTZr0A>@K>v1X!cwmFl%*B`LG z+E{(!25*VQcF&kFr26^29WlQxqqu?b>~zaZN=F<9pRWD=!P`^EnW1J*%-)w(BSV@`#P(t_ZkN^xA$`4z+OykgStpx3BzUoACTN1O19vP z$>v~l`^%Mn6mqJMEwa^IVA6}?&;s=C`Vq{s{&6}%GCuMTAlV8`g=$dgEyCcsS$5LMC$|-;CtgUuq+ZRKfw1!5S(7j#lrVQlGUryQDHBu3bWOebd~Q} zUcGayo^h&R0f9!7#M)}cQFig}D&Vigr`=_%QHQ2P+PQ2WV_78^&qY_8iYTiJcs*jDdsrw_UmxYW#$f4pz+1#rV1tgM$--3?$wBT~DV~69z zRNj7B)Cm%_a9^0zYbq&Di~qYb#{ZTpBK%Qjiof-Y@%u~s0~qar3N!_#v*x&6#e*6S z)Z36xY5k8Xp6f0CCrN0w|I_FjN838RJkLpa%19;`P&`5%yN_FyyF7oGGe!BL7|^0gJ2W0+<#?Vmzk33o3|59w?~RF_60dio4OLOwwc z5hNF($`($e3p4oXZU_(bE<>e($U=E`U5LrJpuT4(^P{xkBwLM)-(JM3Ijs#RN*<#< zTq-Qaxs2NkJ>+f**Nr#-I`W{TsV~7qVM{8HKm}5B{=?)VRqXa9=obGwRKI5&(NyOv zx~dbSHGuItFc#`^TZ*y)x;jg{pbBVnQRJsbNk;yvUsrb~2`vb*<_}XmmV_N?zP`)|D6U{uz?VtCC3&_IY6UmUJ(PDGm34MM_NTQUa_W zKDGH25JQ^g`XN&G6TXi>q#j ziH|okn)NW|3XSm?YfJJ~L+&`3da~jxBxgVzA7Kq?i8A#WcI_)L7Nc)MhbLtP8yr8k zy^{VAhjXKhYlvdqt%Ku)acn!dFivIsAlaZ@IE!bi{SApdnNg_K+I2z?u@(t=H8J9B z(r60ecuE|M-NcD~{{`hFz127HJhbF?T;(phUqi+0tQC>fl$%A9C9|4*tc%+kyJd z{aBfajm<->GuArdcCPSW0Uv6&?dubcdtX=-fA@lFU!MWIebBf}4t&lveC*0+&z&(h zOOv?yxk%ApH}2t*yS-fB!}I1nhd=b&?s*;ymyudy<44ilRuYf-5pxbKoGdI98Y<;R zyO{mfH&%gA$l0^)L;wC}+uf647P~cKEE1c@qAjI0jFI=a4KlgSbd#+vRZM75NSAmX z?-nj#0`WAWrb<-z%Q35X(67q$iRlWnt$asZPpL4rZ<_w0wwh59XsVT0iY;iQw1O#J z$hFmM3dT?yFV-PBhu#h-B0R@3DWJb~T){P2t`BNx1Urvt9&eC_dt3>v&BggizT@z0`Qv%5gt zT1J@t^{J_Z*QccVxun{*XZyZw(6(>;p6&mRq_mE`{>8uF-@Jd%{yi;LdG0y9XB$|v zL>_NvU9At20bNifcZQ#CbeR=glc*MZc!Q3MTGgP%iv#WPbQrs zWF3Kf0u05`WZW+V>R8ff{u$DT8ukfUsy3c}iBV3}rf9D?qFS2#X+&(QQIaeP!@fsa z#7I2ZQ%p_lr_M4)1?cnp%ybl8vA>NaoApgY5y5+M~#CbDu6ERL1U)@zt9X znJ_AaD$;WNAeHbR`jEJ%c z^V=j~8tns%yaIj643Lno9~v>$lgkwyc{7n#AAUKs(lm#JCV)ucE1KBt`YDI^@= zo6iAs#h=amO^s`{)qYNmnuPd%K}?97#_BYY=^#J`4&QMh44**3;C?EEqgnUDOE67) zbudm^hK=Oh_7!D&#d&v>`{-b}m;jYyxP9OKufdihdMgt*&X}TQXA4EF`uncF0Ng@N z5%-}+T5Y&G}N@F>OH#9c=B8H->` zsMIFUY_ZUI#;d0x=#o$=ts7%H^{6qYSLA;No6l%SB%%tKN*6ohae3K=poo4}3QB#p zC&qsPq)As5$7qe9X_BIC4=p>@zYjxL->DoDlpsO=Kj8_XF#*+=f?IXQ{t>*%_+51m zl{7KS*NEL&B1c>>;ag(}B$qTX+qlIl77NG7YK&p5t8L~q( zfzdG9k*pKyxXKo8(3qGYn?W#jNkKcSS@!?=4q>?_x1H)OrP|DNp2XNn3_azR%ctek-ovh3cPSY z{~jBI`wg0wM(G<8j}Fa_N#&}=X+o0(!@atCxQM$*p}t?z5*R4ZrP2;I`z_=sDx`(M z2({=N*AIdD00-Pt((eC^K}9epev5>HU3W<%IGy=QuzZU^qgu5{R_*Olja3KK&XWU@nookN(2l}$5YS&Ef>?jogounIQUf^>6@iiWP3Bc_O3qovdc5A zBN-iY=N3@JbM>x>4(1h<)SQK;d_VupkjZR$36=V#7Rr7yKy;Eti>^C|ec?k6Dsa7H; z*C><4wo)d8sE08Y)k-OLs^|s3AD*bmE-V>QW6HCHkvItB&kAryS<}Xv_g|Py+uuwT zB+1mjj2472Vke;uWE>+D`llJ9sPv&7v_@y&sj@@SX2N}`jeU{I!VP34LS@#3!N)z@ zm4VB*I_jIZ!$QS9W4zO;pT+8yDiS6Cfgc$&WJ@uByKC$I_pytVIlX5?bECmh+dX1E zeDJZ1du(@q484Zssf?I=+bEZ<_ABXe5qctOE$sKPJ)icyzB?tsJFCO_HRa3-NLB?S zccXrY9)otKU*Jvk5dILEDPjDz4&BH{K3QC{)jSO5mh+7yEoU1~I+pOj8^V*)au)Zz z)ZC}!dqM~KCQH7ulP86InM8sBq0UZr0YVN@JCr&JE+&YwSPCshH5sihECkzah( z`jqHuxJ5J6Pgk+NOf+e7+Zh_QExlcIfiGTEtylz|%J(=nDEY_h?@|M1bC%C~D&wRN z+L8^PI%LEqBP>FZGNsKzsIG&%cTo{-M(+_2b^k6HY!G4<2}K6teScx2Z};4vLf1&{ z?sm;~|1Q+1t2ax&(k?dRF!*qxS*KB;k)yKJcXT9(+W1!FHo(R_vJ+jL*f8`)L*Egb zh9*?N{`HBtAU(^n#ggDJ7sHetP?#)xBVp|1NP3t_QF>&IH@a53J1^G|ut*I%tiD`2 z6e`Uq1rw$Iz7%4MKZ^#@+#pu`VGtbgf@u8SMgYHw$n7s+1FWAhrwCjjBlV~peG}`DdQVK3K>c> z@>H9t2#sb-Gfuh>DovTFvhSFH@Q(g2PRRIb~%yPLvTmn zJTcp)h$uDYIcDKd*P^O39raYlH`^#YspDFdQH2@b z*q#rS`GQ{wsY?f17FSd+{RVORwS-b&Plk*dJNnO6mCJq`=S-!a?-tEy2!q^_A+jRh zw^H{-lMYFfv7%Mlh)SQY(lhPGu5A1`jIQSKYDxIg*Cs(1lHziQ#8x47%Mo4eOs$xbP=Q zkW4v@-_qBUsaZCPS9OUy!2)>e9 zzN4_WmKCd_n5&%=Va*~AL0+x5QJi@0VztpC8~N(cBHgxFTCiNJCtC``Rpx;l)eKCe z?<^y;?On)uGaH97-*8=G1I-~x?9<@}Bjird1d~5|Us|WQwp+1YGBPp{whQ}HdCI!v za2?BGH5%5vDTz(UK?+u#Zy$hOvAd7;Th@2Is7KavHd?${w&d-1enZvz7U9V!L^lm! zspi!CuB5RlW+E_lSP&yQJ*kANA0IBQ*;U7g)EUKq$@cv99oW`2d+W}3wQ?9TMCS^2 z_4UN(g}>(c5s0=LE8~+-x_#E&AM2C(pt3S-{7*wim;B_@q0jeZ(Xy_Z6J@(!9U$Zb z8qhG`-4LxVw;RKnks9(Pa6PJ}$$N7&U*@7y_KbrsDJ(5wd3mq3w0(tV6bnY1@n(5c zv>(XF=pUd5>_QyR81pGzs<<&U<@{!1@yKTsj5GGr8FVC>^IcoeqkJCLGyP=ZuDGq|y+0HZFJRN0d$YBZeED`J zR{V_+pK-F{buyC+c@wZGc%ZXdIr%QJCp$HDy71`ZDZmtmE7>#7SsU2 zXM9jT%F{ob%jV=$nUl$`T&OWlYd}Lo1i`EPaN8 zt2EN1d991R*3FVYF+r|C>AFqDtl#z!BV*@qc9ysXc?Ojk*$88}xXd8xb1Q*PzYzB) zvmfiqrR5Q|vG3)}gllR&%OqPaptA_al#UoA_m`ZJe(DUeu&|umx5L%g+~`J%fgD%! z$z+-P`-tT~^9+3Mz@2bnud|e!H^&NBLUgP0b7cgu_BZdYX&I?*fz`j-{h8PL3Uj(z zqc4KmOo0W1|({f=R zq;UE`{E!!aB?h{=Uev9q!Hf%>zf0VvxED_&OhpMymhbm`*ZAFFw1C{N znd+S@>RLL8C}R^tw8!e9?MK`G+S-=S#>OL-_P&SsI*iqW($?SOg4uz~_vvyxD>dS{ za}c^`;8j`SOXbFcR6H>??~0aj2w&CN;WiK6$X!!pAl|TC)>{8bR)-b7#FvFX0H!jp-6EscG5v(`SKAAL#U zF3f#9oEzwcTo&DQTjfp|H$YBtl8FpEtxS!_SKbGQl2~=R45ggnsSpJ`P~Sn97{}E# zEqund{v@}bgwccW?QWUbp~OT@;+v@f-3$A_QS>0srhH+bqe7?nDZv;Lo3 zTRdj_@mOo`6rCO2Io(gySbdwx4H4bIDQs*PG1iSM6%~~%56bt03E!gkbbf49H+Wm> zI;purs8Qt>iaMOJCPlW|lN1iB&Ono2E(i(;vz6H+GH7yM$la;8p}fIk3iVoHr;%yP zx~4F3!6t45@m~k6r=HhSwUa^>W+7GCjOgX&w@INY2Sy{uniLzDF`$&&WWomofth%Hi^rSiCzMjp*-9u~wv zZ%Unh%vpgX+wH{0K#tenh(k!ZRXQTD-hJF7W~BO9hxc~t?oZ^+9`Ut)zNhTu?!(EO zEBAvpRv9Jb%r1v81)Sj{yBKdqhkR3ug6U|6$01d3ml3KlkOZd(i;;~)8`(%y+1m0t zB71=QP-wJrFfh_HKFV`LR9rKCX-wlMA?`*#&2pYM`~2t@v8)ET4_PsyJm)75aJHV; z;NEKCZWQ4U#(1~;jsoL#zC=e8$<~vM#j%H|2^k;`Mm%kG`6zf%ytctp~M0;`l{7 zY}t3X+Wu3E(ky;S_aQYg0QSq2M@-v0-t4hj!j_K4YDPy(cRulw=KW=MLJJSe=n|a_m?Z)l08z= zrW3gI%5YG3*g`!FDV+w}tI&Y>8gMnoyLiu4e4S z4o~~q_VV`KhidoIO?q#$8*4H~$LX9$9Z&W?c;Or9A^qH!IA)=74?Kf^8KoH?%Te_U ziZ<-3FR9>cRTcU>abNBJRQE?5(!`v4z9j)`d2C!X}&a8lw| zemoRWqX9*FC!J{Yu?fD`3QGn!L(x`zQm{Rwbg|QmQq|7LqiBZny+?$N_y02xW$w<>aoJCS@c8Ef;dk5Z| z{C-8OXL7XM%H!2NLuc< zG}8*%&Rv`XQt?-H#t#~bsqtmU5FeS>*LMtg#C$fJ&sFBL)qH+#KKGf=t>$x+`Fz`a zMy)aMwVUqO&1Zx8JYYUgn$LCSv)+6@Z9bnhpD&xwa1(E&`P^apA2gqjnop}49&J9q zG5s~uy(&o=HSXlwZm;gZjx zdHPn#NBR>_e9S-Wg8Eq83H0|K-M8DPAJeTdyd1zOQ$nJEA|tR>kL*6AAKU#eeUHS6 zXr;kLwk5^jA@sc4_G$9FTyphJ`OmPrt>r_6Ia_()RYQ1sjd@i8siuOdI&U1y`n{e$>p=rj3VV+yP=_{mNmW=1*jsQdKou3^dk z${X35`p>Rnf5pH?iv2a@xAXTu%C6b&uH|p?VcT6x zd7^#aB0=J=d5H}|rLe4ho_^@&wy$y$cipt{H9L{?J#ioE?@;t(yT6cfMSM#KrX+{5 zZrObpzXOCF(%;jML^MIgx7;$>!~iog`Q7r%5sPqQe44zu!kYZ9^L)KMahHD%#Wn61 z^iSi}oS#sHus$G^AYqI@xKGtLyWe+WI`4?)W=DOMEYB$EquuheTMP?X-XZn>sGra* zzbwii+B6l|_*zFt!#HE(gcOEdziJZ&N>q~xh*q?jT%G(3R~Jk8Prv_jIZ)(SurTkI zVTmJ$=NA=eIa3$s%q&>wsBjjPrxoQ^R1{SFo1(3-47%a0kh_OOg+}*1+uA!kI;=VL z+#c^+&g=Q9HZZ(YyD(yuc2TeMwM%;U(IU8tq*tF%EwYbAyWh6_hM1@!<1X!cB>u9q z@3hDEd-2@MqwnfFwEvfp!_HY9G5p-0^-LIWV_4#OJ**?o4-HMaAT?yvz-KID2Blk) zFZ@=!YVZqMiv3>g>Wda><1U`A*)O?DyC@=Fdt%5(H>6%VZSwfb`dpb7`_=IDxWSiZ zTt0H}#G&iXn;bu&|CC{seWwn0o^{R7PV~-9Xpfklm>YiWh#ox?M!pd?BIyI`h%0Q? zk)!fLlSaQCa>bY%Lq;XHTSi~`xMj>$^DW6KLo8R0J*r)G^*^<-1y{4r2;n}6PUYm8eH0p-3;)`du zmbP4f+iinx_@QcEKVg;QX&}vnbvy+c(pEXDfrY%!;h6w@&HI`0w2u2Sck(k?iATq6 zFU|b;=o_PPpcxt6qxT7=3E`DI;FX`1|;au9`C9uFFPWaG=lHi+d-GANEr0+KWeD z@Y>lcBi8j@HsI`YH%71Pd!WzCh!3rrrFtR+j^|veNvk5b^Uv@{S2+Ye`OPZF5x~NG z6fhWg{nx7;5B`3Y<5OVBldBv%1Rh`I_}de!90UFU&w%&V8PLkpin|kW;KdRW+SeL( zQDTp?$Is}Qdt1MYN2~~sp78V4&oo9{GIC~X{{`hcdz}-L^wE&7&K+>x`IlZ68+Z8? zqehQOzA`O6W8$RAQ>M~qh*u>QrDHf-Fqc}vsQZQFP4e*2ww-)r9U z{>Psj{PbU+`TU2DeErS0N88$u9oMuFONiAPYV8?jga;rY|s&;!6HK5O&Fr zgazUpiSNQ6@cW_X#{Y%50UYy5^Mi#m1H`Tl1$qK(Kh*{U(%CErIs}N&L4*z>Z~#;5 zAVLQb(VZzEb7hzEuPQWhzf zl;d(>DDX2N0r+>nA1a@e z0s>{0vI*~`tkQ>!22ubix0G4Uhi~+6!#sb18;i2$B`if*g`Y-8w#sRagouy5i zm7!_Zt#+i|h%Vsy6a2)3|J!8X0%Si5_+s8_$3r}q1M&=p+i>TZe#JL+50kd@WAInP z=ia>9ap(1`9R+h%J0=4s=XS~2P~86s{JZ+P_6OQ^g82W)Z`I_rj)rO7L7URu9UNZ$ zBVmDf+SDITABfZW{9lP{(z)uIwVh=;87T%{&DHMIKVoOPf%-&{bhCE~u!; zU07hxE6p#k4-p%A{In^Prsrf|pOs;ERM;!aOG_5U+sldyaw`h#g^nsMbNt+#@zbVV zo0gL{dG_>c&K$`=zQ9#jSWph`5@&g7k-eBaG;K=B;@l!fKEB0er6mO=PWzN}a<)54 z?4p)CgUd_H?BxZwxe6+rT6$VG@e2wI9eEB(QR)H;?d7>83&F_vf$)mF+@gYf`+}m< zyj$%Rj@zX;Rp2ctb=oUjWo4!1&H^c4T4%nFlKg@yVqIx3c2pGSI`bAeN*3BHa*NA~ zOm1Cg7%F0U@mLpA$#Rc}V-16Mw0y3(w&#D+pCCn<2 zzvCCFzeW7*l7k;emrJcd9)HRmWllS_4soP2B&)NM%tBJ`03E@pK+>6TN-;T=i8#VF zn9`laNMD6B*J-u^#r@7g5K`{Sb9PEeS3Nk9m|H6hX_Go}on9v{lj6mWa;Gb|$evqX zp1Z`Jo0kWxvJHIl5_p!YqO71qaa|-DuhL4=EGj6c1*D}-nK>#U zu}gL(iUT<=D5m^GTT z(ocr&D21+crVh^FLN#mTL56uXMMbQ%>c?81wNnY<0sXorFD)ibAtbKa&*CH2MUD zy0E|~M`dn>y_5_@&}s1^)l#WW7y`q_Q-_OCMvgpFStFDQBdY9@N(!rVH&QeqH}6)Z z|52I+-Q`XT)Q3?OKY)O|l-`gcqA?0`i>1{#a~&m;kx@&;nQ=Preh{HBAlGOUQg>I1 zjw(mfS5hQtTv86>f%>aJnV9{fsmo*Yq|+XfA188S)~(6xf}j>LL^@-7D#ba~C0Cpw zK4MT

(ygjT9-)fDS>5gMzK@&BG5S*Yz`W zzEla;$Kn!9Zis?7iuA3+4=1De@1szhnLvR$h;R@}=g&Fe(i&}r7rkqg@4T(J_}`Y* zCjrxXFI7HTXa(WhBRD2D2{KxT^G+~kkW{uv=|+)Ki!G(a-~n_pm95|fFgOqwm(+$r z5Jt&dU=SG{A+Hl)D_0g9R3Yth?m%^lxFxAE)AODC$<|BY{iX5!w;i`{Axl%rZcXUCfVvJ z^(M=1l6MekERvaL2^S}x0zPe7PvW$!TI3cgYBUr2SGuUaI~2Tb*sc^7T(3N!l+A z(~kXWmsOC!B(!cmRvo_a-++ta(|MDI|8D#}P76N-w!jHoG%dulHrOhDx-);{;l(rKOIu}wF%P@ZDY+`*3IZ3KqMaePftUI8M2V&z`|wrYN>Q@JHaOeN0a?}C0|Cqa5&t>JmRvIa1ft7t006lo%4(dsWO z+^h`6lT?3PRjSSZ72fo!PTYGtIM|H&d8ga1$#hQM^Pyj61ISnyRoUJOS37Wh>EODZ z1mDWU9wKf2`N`ODJz@gerr1(p1vs&Laj~|dUm>G)p7)6kWrPsT z#W<2qX~xzF9t`?m=wzIHUzU~DR{pk);%zx3+YzwzH7IBXPX!|vVQhYqN{f+LWV+G+ z1?Zm&!5O0u_CS6{wvgWHkiNzt{SJ%A{zwVS=*<`XB%r?x=pE?6HnepEZH>+SH(%Pi zpi>aGGJT1&NUHZ7Kxavwf6IlB81Ly3L+|s=*JZfIU5McZwrH8Bu)T0c|1z(C3ZjVc z*t`d!Gz}}qXbpYw7gtg7{v55o zH$K2zo(|r(Wjnq9j|4=Q51PC-YoKETnqdOGH={L`^|=+b0FgXsJ%9MH!(Xhdjuz&^ zn{l-pzvC6jS}>EQfxGEN@) zc5w14s3UR4{vxJ@jA4rJf3|R=GE+28M#klena{z}{PGjQj2q6=P*9y7weDf1XqN1< zxP=laPWd}f9=cTx3=m4Ze0rk%g+~Ylw~!~5ADAdVt6I^Hm+iEEWDiWLycXJy6o)of z#(6~Fc(u8WHG=F9)13qZAUV|vu-E8<0KBZ z6A=kl8A>>Jhd;WwLCUQ=^FzMGh|L@0l zS_{+qLFOk%kMC|7-}|PH@5Sg!DdW3KjqlE=s0DdVnpkx;zHd9m_LzNgm(R*~JcLIX(OvC?dyqOobXmCuMxEMCV31rTooUlDNR>eSZK@yhl&O2k)>? z>cvqssEqA@1qq9zb_$+&FRo0+b3zYzV#`vTf|nep-~dGLI0c*Wu2(&c0X5z6Ek3b+ z&5joz$JHJV2tL~$%LU$XsU8CY5&7qkij3jgwh!!ZPGUt;FBwSgq?cq6X^V9~s&T}8 z9``NtN@s*d?EZ4lna>a8e7+}tIPC@;q~d%&U;mMVwfMvP9Dn#VTtkET{N*Cljs8ox zM*wCg)889^j}H_=#V`@j$GZH_vFRaAwutzt_c*Q6V6XV8R!%sq7aUK8_D{z>D!_Tb z?f2pD0NlE-v{9P&WWYcfbFlvc(!7jn0y6jkKQ?l^{!t(&_Cav98s2hSLwhz%^O{I<{ zv7m)+L5hO_SG^_>Jk=ut+8wcFR8dU22jd$-3^l{Sd8tuSdHxbOFFb;N!zIACdVsV2v0{g98v9E1^Jvp8^si%16r2iDp92JjeR_csriofvM*V2C( z&m85%Gy5mSGb_<%w3=qAlE|oI#4{^#)rXE=RXjj?6{bv|CE}U4B;uJJ>{XzJcxL4> z;+fH$B`Tg-sRa=%Pl?9mnAshwVI`hvqjBPyImd`+W-aLMPR5Ge(n;~m)gPzCGb>qL zH2El2=OI!Xg`*<)R`JYE_l9WB6G`#R@!0H`9M6pNgm@-S(;&i@Bk{~!iD#bFHc~dP z!h~Z}KVm4Tx zx*1{~UaUJv5+W0F-LQ6iA-Ws-I;N4o3Jb#6E+l&@M_C=Tm1>#U{=E!YkC~%2^)nhD zgTiBX<0PZD5pQs0%*xGzby9F2c1%P#8p#ip8bjt86`8?(7yBm$_YJ`9+53Jvi&sL; zpRD3H7B-kM>|w9K$sUe(u(o0cUgn5lWT2@NhkD;1!M06`ld zq&4*+OfC{h?PqvG&62iRw(DGsj722=gZqEo_QhbIr1CczY?~JVYwg@q)6~^rn^Pew z3DF-AJc^6arN%tGo2HsK&4nNq>MIvmjcaovYEOvQ_u9h<9+`VSf$}v6SE)KD@z9=1 zL3sExR$~%8tWAXw9vT1<=ix8g6%T7(^k_2uR|4}_xzRku0s4YVSzIz!}TC4TJ} z<9-2lZ9${MzhIYdmf&z>5^u{>DGP4{Qh0kU6+(E6l zS%z5I@-l9l!xy(EQD$gGtWRm7&G;omV&{YdKaYJf-B5<$-@{vceQh!^qEs&X*@5@b z6ZuZ1J4))_f1%Iveq@1N!3|T4nNFh+43Lyl}1jNx|J`Jc-#oQk$J&0L6nIE<|V*XMYrns2>gW_U# zYoSdLI>d}f$fJ0pn6=QKRl}r+`nnC+pV^oyK7T6jQoFmbmXlDTKq`dPZUi9W;`4m( zuz3a8w0J*NlKAdOEiMFlrx2Ku3LylxV|C?d@oj-6P8HvJr1T&@>bAMG)8XrnfPxOi z#dpbxaq;0-H`d?_;={yF$D0!0&(SO>ks`jO??QanBO|GHH>C0|waWwV3Gt0dg^=3y z21HzZ#XB7~yRpx}x*xnI5g3+QTnMybF(pA@cq)Vt_yZu07T+_#?}+a^>Escl^dLSs z1upZxPaVGQ0#vg2_M8wGAEMkpllDefGn5OhtVXC?3k|}Xhz}inf13EuVjkw(dK(XP zXNtXGpu6g}9W~frn=o$$sr8bYzjJDG%?nc@q~?DGL|n83O{WSk;>emc81+aZFgUfi z5SZ!^_?HZdsSrZoDnP`ZCYo;hg3MGPA4j>f95nJ975!2n1Wg7Yf)9Ezr|qv{y8WO> zO>hqngwNm%k6W=!66Ww2{t^R$T7R*}Cp50dx(Ss^Vq_PZg+sXQFbE@0Vd*BJD!Wr5 zgpvCJp%|G5+Hpn#$&A#;d(tE@V$H%hWcxo!Av@+BmX-|w>FjT zy{TA*?gb9r7pXqeQXzzHe?Y|Q$-YZla2J{$Y`U;$gUV}fU5g7fpTuUei?MBFLtosj znTcCu<6_u=d*YQke8gL6l_n&+C|h4fvhAYaUQY5n34d&2r^bn0)HAUccu3LFy^G^r z=WY;-Z$q_l9cSah?-4A*?%Wh}4eL>V+ES$@^6bRoNunLsq(X>1 z{{;x8KP&quwc|2;#OuD9tp;V#pvW3U>a zg_c8Awfe>Qi|%|0MNqo8K>b;P>)4znehzNPaH@P242RMUNb0lXV#SMjCqPzm4{z9?*V;wHGCZ ztv#Ua0DCstxBJG?cEraI8*zINh$C^t%_w;!zYiu5PfZ}sy*-8BH+n#OX&h~34`}le zXirR_tsz<&?`(db?*VZqR(F&jvU?E3d$>5t7Q`Fy%We5CP33n<4`}P-Xg}|P-`PML z?>j?3ax~~RBx_AaTb;X?DAkz)KgQx8#qe|BD2^o@pD>&XEc^j5O#gT)aWMKzVRLP< zE6^VsU}w5&OR&|a4_822XYG=Q)^GxKXWqZ@7jXcO)!%lIU_b9hnxYl}H8iIfB2E@y zM)A0Kyti;oUraAwVKte~<89cqg_|pApm(6pam3^#Q|2GeQ3NxzDV?hqI;ulmwM|85 zsv!_laT(Tlz=Pe0TT&s!RAd7}nW$W>1;vM&6Yvoi&~98WuS~@OSb6J2XS^rzbmeCp zN^MAk_To*fwI~5R4r~wrF53Jtz5jTx7WxI{kL_}HRbM=2RiE4_RsCc4CWc{5iF1e)tD-y81^#U2Hdbzll9hEQ5y9D%qjKnj+F}Wo- zTKIb?6Kxy}+5BAiut=R;xRFOD{{Yg+nQWE9eUBs31W}-nHc`p}@-B>u+u36fMsG zWG%$szJoVDS%=sBMT<;}CtC}UNQtwWB6Yu4Ja)i50~n`APL^AIiI=suCLCD`KZwL` z^cLF*^3l0^rkeCqylE@g9@_kq@Gj-EQQlV0$>!JV@zF{--u%6iBdRyWdKKPEO+P5@| zglgol#T4QCOu(j4NuAgq4RP#}MA7fJ5M0 z!MOm3B`{?Ju0Zk?WZtr%I&uEP!aok5BQeg#oA~IFjlC<9TCyBsDuu*L1uK`ej=|J( zDCKB>C2CPA1#V{nv?;qvf;l-s=NOvhYZJ|iMuc&(csLchI9g41#?3T zANK(8Sw8@{Y!W+r0B9xvonc~lp$C9x2+(F@SlR=?Tml@j0dDG{7B>@sJ{?Jv_W)2r zfTaMi8^6Z<`4;vb&h-i~g`_g__dC&lFx}vYoNO~M`~wQguiw!YZo?TR#?wzlI2L}w z02Gg7EswjQpCH%bFSXf@%^UW@#nC=ob2~Z%I=%I_UBeqwEATNrs9$55$C?dvtYKLX z05=g}l?`x04*vD4Gut*RH@K0$laC&-{}*fsjQgQiF(;+4XW%doguED^ zOWm-53@JE%#Yiw>otu;}jtM(d73E+rJqNZS|_O4>g2R$W;7uK$S{23*Dn#;#ejgV zvfNRNl?w!Ak-!MzK1_VD4m;VUh5ia9!BSE_7D5l{d-W|?g3OH_UmYCkn(Yg&OjpaF zlV=pl(x<7Gcyi6_u=5H`=Egn}R(I)#v9v4uBu0P(>wrCl)^~vwufCcL;b&&?fKHEy z-%fqw^XLG3czN1Z#E+~}umW_G?cD@195r(4az9L6N?p?9bt$5+9g#psW{ zzVoYKV!54GcDPN}f;Zz^>a@+N)9;(?I=yR)rm-h`0*yTF=__S6|^>7qy z7bM1guREBfqv_Yb6VlK=PC|$Yze|F6lnJ*YLA0G^ zL868v?j{M$o?O<0AVGrxQ;?5uDx)mD12TUoYCGdLI^lsUaWCxkZhdv#>RJMQ9Q+u+ z(dn9X8g9_X_pB4KPMjZX@o>o)_x|Lk&3FG7b~f+^Hk;yJ937H-;m}hsF(@(zfjJN^ ziv0nFhB#mw2=*D4C!vKkg?onL=fGxsK@QMeu(9~LS8*u%ZEU+4aTsMGt$*O|%~+JB z3pZkS_2e0^bDbT8b9L`RZ10GDBY8X~mp>Hqkr@l6I%gW0*zNToI2Tx)g{aoEt_`-N z#Xez8tP1FWj%D*vII@o&8|Iau3xZ^`AST8ei~B%VyjBa10IarbNG3SWt=9drNeiyZ ze~_sb>`NV^TrZEy)dj&ia@87I;2%J?vH|Q>Jdc!bweFr3TcX>tT>FYG%YWFl#fb%} zZKV*&3(j`qPy$h<|TEiX0%I0duPPeSf~p<+M??l%kUp8Pc#b27y8y-Ae%%jh z4g9TETMl~G!xTe1u*F;cUUKQQ{96gF)Ph%{Akiw#>;pJz=36P6`JwP4nyCeIP=Kcd zleF_In^#*qwIF|6UU)rIYs!rL6XJB?S37tTfIku=;%rWzpEZztzLU&n!#|VwTnV|> zU>qP?^kFUdw1XDg+4^Di8}-g|@U^DT_u@y@(qbRzvPo)<1{_DFo! zIQUL6`U$qxND%H?-8Qz5lCkwo#~;I>15Cw(=beXSsCm4)XVIa=8am z$_=&oi(A>9ZKxE>vLFXRm;ka#^H)LEZ1YFf+R8svpx|w*tly253sMxFgMxlGfNs)r~k$ZCrKG7{0GC3a}O}bTz<=4+OsETa zS@qDdzG{8!*;)hk1#*8?p4Qab3p@?hhqURF+T41+ulw;K%nM{kMr0cgkM zV77m_z22ZTy&Lgf85y;vK;IDS3;vt4aTaC}fAqHaelxJ6up24W`fRg!P2ij0_i6eD z8$;mjx;wpZb>q%^42^$$5@rz36~9-0J*SkAwL1qdOkcK0QICv4aA9M_e?taOm1Py^ zE34~LsXq~zjQf0pUeLQkMLPctES`JL9Z#(4ZO3Q2BE$BwZHI`)d?yo$~~2U?+pb|;|U zf`Uyj9&aRg)YD1y%kV4NUw~Tm<-^lvoL7DMabWTXd~5X+xL5V^lkmM& z@^jMs{i-h?l!k#1jf=DLpP;?2h$@DEkBac;CNiuWkZF$mD}7Wg+=}Qc>v?vK3X^}y z3#(K!VvPC69r%rR?#h}fJJGQ7eQvrQc@e0z&~XgMkI4HoKGL=DN$3Q~o`B5)JGoDF z!~jf#w!`IG{w6#^s042f^q5l=l?PL(Tn#Ez6v*sRsM-I=+MB>fRo(snnPh}PLT}Wx zMNMm3r#306O=_Mtqfw(IfQo_wLKQ9bp^;i_Q71qZAviO{+v@;Ut=diPW1ojEkJ@U% zT>?T-t7WMOA{CeFTt^YHva0#LKj++;%&>HM{(oPRx%b?2zUO(>A*~i5Baw@Le*VIs8IPi!VU|XUVwZ+_q{X ztmT|`P{ZV^3ds z1w%{|4dHKDD-a#uc9>6@DC7eXqQ*#O@Q*EgX`$uHy*P#Tlh1>h3Nf6nDTbwOq4tGN z*PVQGSD8_h;L@gbuMQZSs`0z{U{-s$at1XIi9V_dp6JTr5aiDM{C;{UKL@5^4^FFz z@8g@+~6p!_~YcWuO_U2*g2XQ$oYq<$c2U zIz3YDY7oIF0E#??GhhBypTg(THr{E-nMz19E$o(m2>W_qTe`Qx^!7uJo1!_OtDm@Vm~7ozR2P%87O5hRDLP`vA@qL zeyTt4M1eP%+7-is^&Hd1us`i0uzLgIXMRbLHTP_DvvrOIzQRpPl)pq)e-U7eQgV%@ zP(X>&RrL%V4%FdvFFHvL_P5VH@h}dl^UjPQvjfj$k~u^wS+KioclbL9x6f_*w6bs? z;P%kK(PYt`eCDFpcK6!Z!u0wAdiL?Ch3>Tfhd>gX)cdG@VmAco2Vyj>q||NG&Nt3k zKEZt%0yd>n9JQ!1q7m6sbMw!}r0qrcoUSYQYj%PrKQvFJlK-SS(OA@uVH~e|5=V+S z$wkI+_HRG=%P7ohAWna%{p2w`k0R@gA{TrlW6fQYod_PFISjJiTrU<|uS3u`z)A&}i_Dw!K4u@0ZYCOOkZzci`r~p<1~^H&_$VkJmip z`Acj`b(sug6c;n5Ekrz(IjIeNKq?J2BGN6c=Q9z(-3zJfVZOGX{5t2b?BL0?*B8;< z?F}yuc-r2>%Ef0g;^IrEnI~{pI;r6_4=PSfSKfw8sYq8&;HP|_W}QYA$^^wTAH0Za zoTcilTU;*{C+*`y<_+zPK&;a{~YiqezEI#7^vH%##!c3w%e zdw(en$W!BRB06L5J|_klvGB!*2Y-+C_diW>XURpExT_l0?tI@(N!5H^g>E2aQ;eqV z_1i%ZT`_Ac6OTy^kg^j59QdgIFHzPhvbWqfCO zPwG)}sp6hg?xM9Gvz6bby`BH6I6`TF&RqCQGk%zAmGUH8kO=u%zBtKNMr<=4-7q5X zl*%~CBlvDw;E&@Y{5z>?nbS22SQ>C+ftjXr{4@9?K}5tZtaOquNPy_-!N3{<6@3!psaoUNMy)bQj%6Vzu5<2X z|GsnYD(Bt}>E=UsPPQ;ZjCTlr?4rreJndx%R1?un4Pcu!e3MwJeKL{6+TPH%!}fq< zIZ^`faApXADO#@_49JiJT)D^sAiAo&>qHB!9*oNGywr%KJ!!*6AQT;u8Gf#H!%yz_ zeI$s~lP8=xmOM0IB)nP{4|8G}dt;GRGbU7%d49d=%h!n3t571B?FQXS8&~c>!n-21 zhNZNm8LHO1zl(N4oEQzevSLQR7!92sp?x(ptWF%k%j%kQ-zRZweaVzlM3IJd^c zyTbzKR&~40%LHdfD@I|vvsq^3{1Tt>|(YZT94O_;Fb$rdNIoCZ5fe!h%P{t}+^ z8Z`>3GFs-O95UPVQfFSNjeI1}x*O4ot#_z*L72;Dz4OYsQRd}_l?^Wp*y$wKlYuj> zlh5gwZnQ>Q;B90qyz_71#i-A^Et+p|+b%QbaAS?>z+8Z5qV}=g#wdV}yb@h^xyH*S|HkByztUzZUnpDuM^aRx^? z*wpI_^66`?-p-)j%c(_po1=LJ=FtO!IV}J~SJ0qe8lWEwz#In{NaX(=je1n+WG{~kfzgUT_0POX0&uX@Rd z+eh+ZO__IQc;KN zjp%#z-UOLvsbl6GMgY8yW_OKq?{hof2t6HJcjbLfSB%UkS;(P$@SykztS{roJ7B`@(Fh+fZ+ z8=R~Yx&@D*&2HvkrT5%jq8HywGGF`|4bebGJMYTAA~P2HrH9wJS+L@sIT2wgSve3s zU+T2AG>*-e_S7F|$+OtG#>_K!LkTuWrduy8OSi5twiVx7lAg#lEaql1dnK4#70nz& zUIsr#Gx+g3?MB8F*|!7dcqe%ioU~c78>309_A0OEc*()IIi0HG(3L)(8MQufO2*-D396Z`AE=D{(K1xEP(bc4@IW@5 z<2TW)9cea)*EUh8S?R3DY2wg9v*L-`0}1+m3Vy8^%sGwF@{4keu;18AmaXXQe2P|Q z2CPOdc*qSDO~0yuPSs=yXU@NwvKK|Xj&cZL=<{n~Z|Q?usX%+w3`3tgq0hc_d7k_x zUS~XN1>=Kl8H<#bl9{kFwq}MKTSbTe=xYo}P>JLoifbt4I8rj_G3{$B)g~`|){eRdCaONJ@;BT6m}HCKN;exa1Rn+27N?gQ@aZdYM+0 zQ~v=xA^GhJYmy6xGd_Bgeo!SD1RN%t0lii#D8^K1o<6E*Ku^l&EE#o)Q9t(?=ejvU z+gR*zeaCf=?YJBhHz7FIIe$dTaV%C);N_&gB(4rGH^X~s@5ZhEr(mB72?bZvGW{0p^@+J>f3z((R{6hho3VvsvvZy6G+M*WMhT6_E%Z0=Ci`SN z*9*s=&jkWlq^L&_ocZ1jP(r5!>&$e--9v2z?l|Iu#FLfW1!=TvdExy_?hCquZlw1m z3dpuirqCqLLBz_D5@p4Q+VGM4492Pln^MOmyRn`thcSJjVd)M!FkR$OkMPCz*shLO z#jB5S+G>BvWw0U~b@+ipgEKn+j-2TEV1Qip$U^sBG`7xt-s>ORHhpwD+>)-Go(^}X zE7w@JBMpU{Z>SC)qp3feJJQ-;3 zrt7A6|E(RUO;TeX2(; zO>Fs)DczG=qf?#4c`}d6aocJ=-S-#%s!c?+Qz2GW!;UiEj^HV^wxiTcw^v=IFh3Hd z^(rZXB(LB(e>v7YBPEl$t8FAd&b%)HH}NqKhp8Giz*AJl!k~>kjgV%no|n6LvG+%v z$eG)%jAV$OKq0eiJ@q~Ia+x8dOP^*8zS`JZ zVMGoEI0g7*+Q^aUAA&X)8i_S`HH$tR4*@U!hSvFa@n<3LgPrSsENiov8cO_b9!2z4 zi0;qhg_~sK;JkszS__)yiF@vk#XbL2jJI?Ll+UhkJ1XNhSX44A@%a8Mz6#PYb`~Qi z%NI+QAy8)SYv?Es{(q|$!jEYxr4=tiG=H9%v}@|-q=}$5Zr%7)&=K0?Z{Fx!r+9wj z)|Y)JAy#di6+Nc`?T$y!ao=CU)lCzlBR4MHNc8hEoi2XQLD*WrxD^F&<*Qle`m)bc z4I)_Qcsi?nV+MF#I<@AdlOIIfXu|}M>Mep3r)SL}13EWCqsj3)w=v2cIumKx2xO=c zZq#J%xQV_j2e91AFD)H`=x7N8Ga;KPTtS!E4f8aP0%zg7k^#Q~v%l_4U?jKeseJZR@ z@0sKC)h!I_Gw0)&(E z!0mgdIDfu<^~%3b`%HICSLe3EI;sAMxoB4JsWZk)VB?a(FsfT5r;C{96`Z`BqO0k~ zpNn&3XExzw_@;~9MPws4I~eXvJXy~?>~b++buk0(2^f%9gf1QPR#1W6LSXFg{{`P& z3yQ(Xwj2~+P5fkr732F_F+umk_l3>H75sn1cf`MgFV3SR^J9iP3+VgiKcVjz500;0 z|Djo-dV0lilyw?xX@dXiXN^dQ-!W`vFjAf8$CsJGTow^J$^XPKrQUIpzas;(RM)U$ zGH#!B|DHvjk=Uyc(EVB zS}VoA{SaGdV)_dcrJ;+L?{nXay}u{%HnSOMQVS?lV&@bwjX>Q7JIS@+zhk)Wr~MUA z>G1#ZSIUkBtjav6?Mpn+H)kG5vuj*$_&L_5du4RWhBvIu9-5f7j`h3YbsaG`tVPYS zw>sW-Fd*h?Pf(2L1S!GWmFdLK%eOAi%mc1WN1a)zWJf>5=q-VgPr_bMCiB-*z=g#a z=aZk@!QvqU9(pK#t^|Cm%p;%OT>|HSL(ZWzB=ZbkQB|f!UWMB{mBm?K$e{W~+{FPW{zQpB zqp$t)bH-LXU2hs^$Ym@`H;0#PteU6U%uL7oI$!QI@K(bcU7e9!Un~;;tL87y{)%du z{pHA?d1nEMCpMCFTbT7Y$ul{ybIHi)nSaDd(mPQdQ==m`5$f}MCOl|vcgu&_N?%o_ zf1>O`E8Rdm&DNMNV6iDf)Y3Po`sJ!&s@c|A(vpCp&V9L%jq0D|=xO`o zVr7e49*ECt?p}o^sZAZ)*iN@psd zS?(Vrlr?^O5J_E*D<#`5h8GL9aH+zP{J8M(CmLh2nM}FDN+CRbg7_y8l8U{n}3=RJSDc=>r#%1 z<_*`P!&Dht=oT@*I#R!p__?WfHV%(-e>Eq_F`N)~eP*h{(W8)#H2cFd7qBH=a~VBs zDc?AJramhhS&q(S`FfD$ZtYK}l8X3vfOd6Kx0Bp4xCriNbA?KSLf;qMt|WO2Kp&IK z^%Byr+Rq3;SI3V}z2l8%3h71QLi`-QT4-eOefV8l;?qG1hhnf|#l{}Ysn z=gNeGG8a3^n&L9L*v-^)RZylSS0>kMV?_?^Y*gpiEoRbIJ zf^<~Tzcy@{b32=2>8_=;lZHSkk;6_*%Z@;&!}-m0 z5&nukf59P9we;YtV$!Wok_j}5>pp@ahODb)0V($LTrr}KxA_Rlx2k{4aw%IfA}V5? z*q>^PQgNj!K4qJQaA6Jtc62Ep%rceVTUnDZ?&8twVmMjEPJW37Hf-`U09$BQ^flAz zNbIU{QitndcBH>O;N`!`uUdm~v;UaNtl~?5DkVJ0pSk)!#aYHG%R^-8JAj7Cyh0!| zl;c)%Fr%f2OlOB^${^zPQy55XnKKx$g#;s`Gff2dDHdQ2fEZj7Zx72c3$BD0EGxkY zeAB8O$=f)29E`T@@@(_gcGZ)@2rj;?H=) zDzzgzIYaezy+QE)hNbNUgMV-0jn=fYWR74XMsHem&kNO{guF>yK z1m}}@V9D=Pd{(;adSyAV{MMqQnV!IoS7KbSV3jsSI0wUf*mfLh;tu>pD8 z!9kuTknsRyH?k&e>~vBO0K%+4I)YHce~CBZ4Y~g0*(Rnj@e5b*VVs#r9c$*j2~RI+ zAJX+RYFqaz5h{zRj=*H38xJQq!)~n>8g@LLRSB!~Mz`tG`%GA0gRrN%IYQIs{gcgG zFCpv8tNm2aw;oO(soVBy+SwypQ%cd+?fz1ZmGio`P*8f)L&F+&&=1(gA?Pb?eCOTz zI$uLCdZme(k;9#?KS>iuM0%s?>o3=NS}bHw?eNZHUsQl*vy*&^JhsbuF)T&MYmn@g zU_bVS_ks_vbV-Q$I5r6rpe*#PTG{36g;;`@T1h#A&K7ohvDN{s)uFA)R&P7R(C$urv z*)(Dto7}~+7Ffnf_lf1@C*8XRSk854p(gGJ=tgRarR?N%7}}d{<1e#V3%al1-bh?4 z$ThKdBsmA8=nb#*##gv22dsCJGdZm=U}l|{jNS=YnDcqH13{`|Rg;q3e(w2U&P4IX zSBjbxs1wi0HQ7m>Axgn9s%}`D4yR<-i9oeRbaYRb<`VT^XgQp%7mW^E@7|$#Mr1D@ zZDfwJZbszFPq2%)hUM(*SnLBlY=M~>mQDBtedE5U{I=uix11F8M+)e78Zwd?oj7@W&G-3P(Gj6djKeU(XAn-bDNRpZcyzD)NOnmgyRfKS{Bm1Y5lu{x5RRH_vinerpMHR>G*V4Bw-&T7lvUYV9Ll5>!u^GrApe(| z9>$=B{M&f4;}09MrOW^w+H<;@0rKAlH!H(NfRBK@@qvk9NaZ&A-1+*ujEk6Y zmEvB1GW=6Wd&U1(>=yeGpU@1Qg27dP(xlK=Uug7%9Wg4v^t0W!N5MNF5-2N2pAaMb~1o5%V`{+>jVe8xlW_i*bW_i++nm3uZ60gs`d@aF>AI@^*#JZBgTp9?| z09Y31+n(rJ3YA0tUwQF{HyP$KCQ``Uv#jMy{=q~^%_d8zI7>~CWr4|3L#ICZfC1QQ za-UwDdr#1d`wQ zonlH1E-tYr!1fh89%dyZIoy`G%#=8?xWuZU#J%|v71VJSC46&IIQ_6*KB-erzX>`eat)Cl~Z`e#Gu(la*CSz!|^6B#D7~j=rCX}>Rk2M@9twQC@V^{^33Rh-c`z6s6a!`V4 zhQ>H4_d>O38?e0LQ(ZqGG98HFmr#5x#ia)5`^}o9JNfP|ch}SLXMSdVNn*>#?(hnChK;_7 zt^LtVUW4rUhJ|B_S$IewCT{~)C^Hh%Nyy52+6r7%d*TW8Kw;_x5(D#`AGrXzuoiP- zG&7q&FYh8lEyFv_N$#dKVuI;@TXJi(Sot%f14mN^Q2#ctGxHVRf|t~?TQ`^rSA!5- ztAJf{Qzpm}Zs)TUspDIps-u2;{V(IBgZT!I975IX8u#^@EWw~DT-H%d=4Rsw z1a^UjC;Aj`Dfy&yQa+C)tHBu%yCD-E?)xSm6H^ERM~69^sLBQo|GZ7qGlP_u~IL|FoVbeDq`n&eG?H zkju$Vau7o{4D;y45Akd`?4&xOy;(gy%}FV;@$UE?DJ;*O!jxi%KOdE2{+G4tIo6A( z5&?!K(ya;Y?&#a<^G`WHGspQoW_XL!zf$Lugfh&;c_dqb>@LsMgs}iTvpmy|)@kNcrMT%!-Gpgsr&wlKl{*Qi_ZCYc*0j6~{dTm87n{h1aWX6Xw2N0xhRqUGEEshR zR`MJEVG*UiSp}tf@foyYY;=~BIuqf|Vfb&@i9CjV?%LW3Fx(9x`s~C{VX3tfk-$!v z5$H!~Zb=Axj*s$(sI#Kk1G)uge;bD1j$srrlrT{Vl}NzJ_I$o0c}$mgcE3{UKGVJT z7>+?C-VMEX*j`y~z-h$5nmtQBjf4LEZ-w3Fwx+#cX^EW_v1dhR zp{O(6T?4jZY3Z}M?{e^`I8D{LYVilSpM9;Xc+tn#zRx+TB_D?d$}{MIeET0J%l+Z_ zjDSp3Xj+vyWik#hK-s?#(kK`>PR`{><)*(VpnZx{+#ee)u-kCFMsBqJyMCXr#wZXi z%Cr%VppYze`sr;jWHF-v*4Q}=c-W_JVE|RzLi))3?jw4yGrR652 z!NHh60QVv6e4h}nJ|Lu@2-1lGq|pcL!Ol>Y&jnd>3#2-WRyK@P7F~)Ud~#W$MZ>HO z%Cd$msM%zHDjc#6jp`In_8llbV)4k;JBA-$8jpKja{M2=a|g=Ky6TSyKW zM>79u(^F5SFUGmPfyM?(QcrGKqMGdY*z8x@?hY+Aebb>~Z8!}_MLKdT_6UlA@ zehV&C-y}ocF)iIzprc`+dg9km2duQU&~7*2@T+)& zI4V;qe24R8Th3F5m46vV>><@fjmX0QD3ApJQAiv;0U$O|!%+a(_j zGR7#0^P-rL6LI&q6vhJ>qLQ`Xb1n``-VA0c{s1`byGwNrGa&vk!YHtwAAb`}o~Lm^ zbY|U@aan~Z373PT^v{e}>T(G0f5<2m)lLxy{zuims$CFfF!4M(p*==1)aD+eD0=c^ zeE9bRmVZW~)cug&p9(%!hTMKV!$i@Nc)2A1P>@67Ca0FBFQ!lWKYU1-Eoe2$ljV}= zw(S!2^w4m6+%B3U${2USs3MYFpIN2tPCOV9pOhY2o>;DBn_)?MU-ryhWP<=TlJ6SH z_f@9=dz(s0tZ$WApL}snthZaSj$a>$^s#*LX9gmDJ}=oHr-u*DN|{eX*U8msBOTFNR!FCAg@+Z=|YWoV5QRQic$ zAsu0mxR#Ma&t>7jV=DE|9u23=%3Q!FejI>dbpoioV(m~Rdaj1 zjoA6CHfS*Yf#W1!+D}$V)2hAuf5$5e<}UHhikM*}&S&{F-C^Zwc*;QF(wZA6>#h_d zL0{Z4AVogq^K$nI_1+{_A_F3`n4B3pM@x(=bt(FC$;R^UBSJSXH26vgMnpIhCcv2j z;fALg*7~2NwgAzh{fQ&Nc#=1!(i>XgzA%8B$}h#J?HH<6*4OYvTlmZNz?wASkRsZS zxPK9tvc7=+h{Pag{tVitKQhnuM~YjZhN*>8r-H`i`yyv6BpYhtU)75edSfaYmJJ+J z8NbYuNo0}O9E3zR+};ealtDBlD&M~KTg0(a38eMzT`9tP|i}dtSBO)sF9b_p9gOdFq8U zY-@O0dVDr8jON%WcpDDex;XLy{j}18!c;b_X;|t0dB9G@Mq7icoYXRL((`OJC0mv{^^!HF7V`Fm#0$NT&DSA zGBOp(<6}txVAEYP=DnCB`G&p-&8^7&Sll2;hH#Bm85*9p@-!bL4_po)99UaKzb6gI{z3K*^-0e5=3VINFS54smT966b;PcxQ3-{ak8tQ*{OXu@HzeF zPJY_aq0u_$qBVM+vt&iCR%4K>I0Bgy>q(nHPGK}L_?;B|PS!7Zn=)_VpLPr#glYXT z&GUvRlDD7+%?_1k70}& zEYv@4q-&zq&}GUV(;nkc09NgiP=-1k0W=M_o>Sr^qv`-i+tJkn;1pZIC2UwX8DMjZ zoFRJr9-3o1LR-h`_y}IIKMnW=nvweN*&bpGL@K0398q6 z@^EpfDoSNnDbF^fliTIki?273vg2AggV%eLC1PnuowXjXk;M>@<_bp@YZfmPD@!4s z|2T@q{9~D*-5k{KUxVbe$EI>*P-+0>tv|htP0>cof}Wcln6t-Hz=Nq=kF2^zMyDD2 zYk|r{C-tVfhOG=35vkF(NpNPemy9kF;+T#T&cOJxVI_I3%J!unO*$x*kA-+PzKHPk zcPa&OGLN!ghFVx+bszW_lzWZv3nT8_o6oFr_vOmXqFb8Fts^3IYy?>RFQr(y$05gT z6F};|1JY*nGsxhiWQj8K$d-ew(dh*`yoqIedpM25I24`a(AP#`dwYO2hhI!Q0X>wX zJOP>3X~K0#o!Ust^-HSxJ&*+xRD+ACcatnNXhX`H%=Y25UlV(TE;-!DU7(>l#=Y9* z1U>{jvz+V&^g$(9^|YC)GqEmv#F)l{{8ntCm5E1lGNB61p-cLd7rtw zoHpPi%#ky8eUCJ9tdshQRkUfmO`yrf98q)<&y&@BGdscfMH*{H3o|#L3%|yc2NLHm z00*ltfopz%@BT~7+qiTQF4ao~SsI@5uSF~}>xUKcD>COz%d7HzdF5-DkBuvTK=H(* zMm(7-XoN7q+hH7d*Y|d~lNv=%(5}Walo-~4?zgFsw1Y`)KhAcrQo9F~u|3t?Z9k9l zxjH>(X`_x%1;$E#%5yTSgHcxQxfkFC)mF{zED6K+*EJjGH$BjB^5(doE&G%wjOD9<+ z?f4t$)PPQ%|6QOdK2RLCh_%n)7b(F6`08BesNCC1CT^9G$h(zAx}N#z`v?q;GKNZj zF4M{7-E&{*q?JzU1r#=?*b|uAAQ61bnKGKwqU0pr)YX@XwBf9V&-=`)Iy?=*@VV|q z0PSX^Rd(BswD)B-YP!rs(J}mJM7hh6c5|+W@fKo8U;s$t-KAB9~cR17k zZV>)g%ZZ)mq|BWevI%6$BP$Hl$LhntbhOEW<(VYQ(+zBq_Ur^yGN|NSj(hme*7$T092LXCcOD8~{X`nRLNsfR|%2^rY^uI2~Vc%S|;24`|Ouj%+#F%|2Sw?%w zHA%U4(_iqnQ!7xbl~6MjG1HdGXP|s8@d%R`c9MTBNc{M8<-}=dpcwx8qb=Oa1m;`7 zE#SF7NS0vYbyW5`8cXd{mFq&~0+Rqgrr0Co24a$Z@Ro+Y|ZTQS}u&7{mt6-?g#FAFQK|(yBJW$1;z>3=wxMn zi>TW#p>3g^uE}FTg|?lP5GdCGo^^{xB{pBKk?RhZ&CL&@S-mC@gUFGu(>8v?TeK)Q z9DSD`RH`ad$BI1KTV;mEG`>zjWUs__iKmnGyb3+g z*})Nfab_>$B=(DEa)!3mZnsz)xUNY|JQ>vyJ+g=K=wMw4!={byJ=_Zut>UrLOX#R& z;k`@v0)Fz9*0SVnK;~7j1djH6FE8d_Pv@6~1fIDIoJn{ncef;kzoQZRcHomz(n%DohTjR;@7{C>Lcd z*&x`dLw+^R*t^=4A@!4_>L5KWFVP-I8dcJ}I`L!$3{bO*;pxaI$r{Uz4h9c|staMd zmDCo%qX|a7JGW5FavN_T>qb&iYiDZqB7D+~`Z%lq`}TV}e4cmX>!hT^*RidjWZ&}x z1n-caL8xH-#E!?I{c5#$+akU&neJq3gZ_heG*diPB7-+na~_%hdfQ0so8Hhc!)x%8 zzm}&azOwB%mO-xcjsV~%vR@A30m1uR0lYCec&*W>E0~6oP*#2~^BJOX0+r?Q)7jGp zZf==NeC1F^OF}^B!&xT7&`A6g!z+?@XOUXTo4-b@ws)zfI5fvt5k5#Ad)!(O8H3t>!p4C3-hmxf2I5j^{y=I zEok54CE&9TbRq-Grf@rC#4xk#1boy9Z@-xh zgGOJR#Xov~#n&-Kma`=54d^s??{E-hMHA1{8|QK?9(#npH+OH?EDZXQ z$uWW)@eZ7O6IQPg@vZlURR>u0Zkf9`%J(bz{Q|$!KQnjlFn&8$du=7&`GegGG8(Nh zF3KcU9VjupPhwy%1f+7GPu{I+fk2(tyzeI+TX{aWQx{hY10wej2=N;>3<*aEUxjvW z)`X1CG|J6S82eSd&X1@j-43-ND4OE+<+8Z<2GCS;qvVKr{zZu8KB=P-8n zScX%)VWV@em3mDGgevXFTaS5zUpmwV?qHk!?;T=7w#c{xH2u{ZF?$Jf{+;`rIRUTE z>ojzo*+^5Xyq5adpPj@i0NThP+XVhLR7iZRU}vzinByJOqeJdZ6G7y90{%(-ngl&e zKlTafb;Huyk69}6-nw@O^u$asHRmCGYUY*6AaHNPT9fJ6x<78YX4{n7o$l^+e;e?8 zs<-27o{5%X2IjRV+KQ1uTWiBR1@&43X)(RvSh`Vh1 z%@PLTS0D`I#69K!GJjeKT{(T#baZI1weRxbE#5t%&W^TlsH1&HTUDrI%7e0+=As_( zs(PfKXupCbBzrgr=D!ds4)X5U=FL;k7n`RVQNOBdM|$%_F5&-UJ$U2ludhg$@1dTy zdVp{UYooD-Q|h5n=LQr z?m3m^ql9Qx$Z53)U0QMTFnFsoe-D5ZUsO9w?z;>;oFxmV@)P^mnfJf^y1r$n`@H*f z_CEshAC&31V+n=f!SpX#zOT*m{e_s}rRBSSiTECvDfca#_nl)a^8(?T7BRi`@h zn*~wQ4tctF^-JH}@)%@Em!IoAac;PKOFzg~6I)iigC{T`laQIr&*md98oOFDqLjRK z&XP!Mw=-{`2)M@*5Zh6gZO+A0rb8gK^Y}W8k+t2YjEZcEehcw`)kSgjlB7PMeG`O7}|hVUG1Nb4X348sMVGMD-BIs3TZma zOq`!DKnAmak*+n)6D?s8HAg$m`h`!U^}38)cH<-n%l*!#A&kjy&z@-G*MFz|7yh&M zqf@s1$euIrA=}}N{1D>rtJ{z`v+V}5^WZNeqq`>{)3KF?K(&8{M6V9mj^+7sA%U)K zu!J!r<^FHiGq$dxVQrt3McvW$?o13$bI#zPaf34@LXU^+W3bejHx<^%^x*sVLr>g1 zSLpHJo4Zg{;#>+!sh?vZNp{&j{p<4|l1&_ArtkAJ{j!_PgwkUVFLlREaEFfV8EQtX@Wna0E$kU;XTXMz75wbx4TDAlCHn`ld2O*^TqFC^ zj4=D>^s)8-9G_e-4@aml@Jy|XIB0xg{av#Ofd12aSOL)ECIDhY?vdXELz6L&Jt1Iy z;gGz-(9JkE-N>oPs2ua8ldY;r8?C1O#nvu2nQ_k$23A!TdJii;dfdcEKh68wk(iZ9 zK{PVD++4@1n}Va>Xw9^nk&xSW&SBMwlZxYYQL;ww^d|4hdhdcp@4OM9Rxbz?(JJOC z-h;-^cA}4*w3IIIZ!Govi|mXL+b5h<5^j*SE_;+jaY>mBe)n@5h`uibgaerrVIOJ|zw)}}_`i{WqRL&D{W^isGuhkSce4wvyym`n6T#)k_Jvx}Rzd<4FBLRkUvG5h=90?F+pQez9`Jq`B`+ zq1D0fnW5Te)@^Mbz%F!(IP*@Rj^=?*lG}$$niUso&X(cskNANjP3TuYCJhoRw7oD2 z!K-782471aXxiwVG10A5s>Z&<4?auBDDz!xHP=4WO#dP|s`(a;J$>!b?ke7DvWF~; z`Bxp9cqcrhtt7T=)^>_j1Gt**Sk##>cB={#JDsu2eQOBvKv&#J&9Yyj;8DBG9rvM- zK{g}MMzL=>?=?b!-^niPMaDIIZIN0eFVQwJM5ZYrJ}^|c;4!chzGR%_{isjMYWJu; zq1F24UZKIbdiNWR?iEe$b;8P+1NUL&_pcDi`a3DDvq-mvskRwtO=Vn;0{I}8$JXPb zcHK>ho`89Yz2!NkRRc}Jo96csMTuhCF#*%K7}PLLzX8(*&N#36P$zLX*_$IB7o^)F zg>|=uIg=s;^+drKWOwG*QLl7mw`HbQju-(Vt&NFob8%L4Ipk^Pi)DPWKTc06G)dQc zPx3}ge8K-f^9uBT zEHhw8li3&Vq&3Vg6cZ~VJ#A*p#BJN<|3;|+C4`e-uC~44KI8u$Ks{|rlN$IPws<2g zG?EX23}w*W-1uVVQijM=o2aB_b}h|{rl-(Z_Fspz1(t>w9~PI&(D=GC-DZsRv{+A8 z;Xfc&9IUzJb3UWy&S;>iPY9)gcHWjlT?ZWmjWUe)pJKM)ASlcsFDvRqwtvL`I?W?M zObo-J`h_GeH=N7XBPKn8WW-i;-;OHR5XM;(*%!$$t{Cj*btn&0~S}CVOn1|3UmoA7MF))F6Jb{#QCOE!P__2V>nVN54%!)ou@8XXgCh zg_vcKtjqg9ayOac1y0YpyhgY`6Rn#60ZW^_({-wbCedp!WI6xWX#JmVTK&iVulis1 zf7J)`f7SoM|5c0AIsd1D-+$l#RU7};=sp9@>N_d}`WCsu^jW=Ywu&H&sUeZoJtuYU z_Qb3B`qWx)N-HBw9kXSQl&1%in!Yv+(P|pj!qFCKFgB^leLk_b-<+diLOm+f=yc75 zdNRbf!y28<%pISJSLdY5pPv+B-eDvce=I)3_|48{lT_|>wbIeUiJRBn=q*zas$l$! z>T;Fw+pJ3EsE-EMMnt&YxlZ?P8M_Zx|3zm#SJlniBF}@fzKS>OHe{lPCK7SjSAaKF zX!xnvVK>WR&ms?WsmnWT&Blfw{Jk9Z!z?^Ens^)((V+y<*qUpPa^(tZvf)_wwK;$N z{0#YPd4^`|uRjkLRAzsF{e=CppTDMjp*zsrC*bOON2}htK#RR|M|h{TCQh3ea?j<+ zsYosJ*l=+s&MoeqHbQP(iw>xH8il9r=f>+otE~%fvMwBFKFu}5HP($kE+3Pf8pLla zB_M&!q-re{<-Y0;;J$=!FYZf|y;qqTyTF5a)^A;<`Gje;yIfO6$ku7ymp!B%`!-7w zr;}rl(d5<0C@0}H_Sq9f7QZ6SwULDkLyIB{qKd1-+~TRrI-7xkcmEx^a+0Q~;%GiK z@(BssNi!s2I_1qq7Tf2(YC;PHnC^>_T=P51%JrUsPS5mU+L^GtaeoUbNfughc zaIiYe-I!P&p2^zLy??p5jp`7EV@~P#I*U=haQ}Q5KhRn5Yp^idJnuGjFdzc~ zJwO0Focz|$y1NofwTipmcLAAJ(BDt5bPNR9!o(fxvX?%W;(rxP8C}D(AQR29!h&D> zw3|t+2q*TIxfKjiQLE+cMLdc4_d`Z_`yPmyqVMJk6Kl>wfK=G6pk18HH7M-0u;lFz z%FDNh)xGi-sHerNCa9z}(=bJqFvAREL+40M;L4=NeXi_F+U^zD23a3}74`-UY9LQj zygZhfqcek}v1M~k=C_%s(aiR&au)bR9)db#M4a-hou-W^$-|qbB+j0SA!f zW&IO9kuokfST<+dK7j6|VD^u>I^8`%tuig$bIvtQ>aO)^PAiqQTvp8EmUdpd!dZgUog41td#Sq%1-|f;M=lysakip8p}np z)qJlqk;A8;U=(}y)|~RP!{~XHo%>;I^_*?)>e`GrT85&ff1tRbMMRUrgTI1(No8Ix#QZPbEDnBg+ zbq{V*L>+ZAWkiw>(irEu3LqxlI<#{S7g*~QQPZ~Z>aVnfp7%9w29`!bk(LUWrnz#Y z#aWPm8)c>Gt0QiAZH6$u#eG(>?kWPssI%a!yUfUNi*`|?o9;I8(tQ!|_3`>LgbPWI z&i*9&IRAa@8|S+wU*|VHrgu#STiudC2iK9i$^AMVnL@3(lX~et#4^r;YeBC-#@_a) z3STOM54x0Qn(ZVty9Bq!rCzG-K!w0A0nMDwGnoJ%C&}nD*>%`HCxK6bY7ACzgk;H#8l|>^#A87CUs2c|uv69frH!9Pn}a znnnrytPNRf;rE$XJxiF`cT)?P2Ow)y}(sln)vD*wUNL?MRIfF`+ zv<8Y0xxfgOaV{cyErH7$tDGU~Gxjn_19JvRXTS)70~#c}`$+j5MNad+A#<|$paw}} zUW#!v=0$XFen*A+3=(EmyA(PJc#>)JATygAfE*b=GEm4?|1u&3(AO%F5m0<2=t(tO z$~Xg+w!7x1x$HaUEq!h-O3HcJ6|-_)_OQILoB`cpD`vf0=sB~mc*YDi%M|*JVtx=2 zxi1hC*|9>xqC)fhAaY`}F+>Ln*-n+|O!?<4Ct8yy>(3dI;&`HG{O?dBtkNRfd^f*1Hu}Vi zxo-YtfHm6qk{${$IhgL9kTJkpL?1d?pCF&Shh8-RB0Gr5plV~>V;cwnbvBxM`e#n$ zXPQhS10gvdF%)?21~%G9ul<|`J+2&>JyQOrm4w{*hmtk^AuS8~T%}^sMD@Acx1jDB z%ZK1MwOpxi3L_(v`@E#>bd`(MWY@ zWoj*x3G@%&#!_<5-Yb#B7L82nY_>-FTN9&$8+JgyDm1br(Q8L0q7c5?xo!af*tVHm zgt>h}Dhu3-gH0r?n;NaC{j;VLeoZlF-dB-KjZSFtvl;JpEWhFt$%4ZjM)5=3GW=C+ zYy8_JRMH3yFF%;3`vP~h@-Fjb#XGF)h%KL98T(*X|ApB>u?<%Zz@-j3f%o@gA2{=w zj$(}p>!HqA>ApAwYDoMC^nf!BS{`=a;t%6~V?Goh0GFeA8i*FHC%b0Ep;99b3Qd+e z$rC})-JN))zikj$RdNA(EqsAiX5t`m`os{rwm^pwQ)-fDmMdHO4-xh0mxUBWO>%#r z%iJp5ADG33?hk_L0~29YyJoGk8H30TXSXj@e}6ZKvwI&D>i}P+{(f26m3nVhd#8b5 zAH&qqN8T;NQhXA_-skrTO(F0Jh8=hkAz;|R8M8EvpoJ7nBh2EQi^7VBhN)S#YPE?b z54y+)R9QA7GMYSKbj0sQQ8d0Dk2Y#)+6virsOZ>QIBne$tD1uz*&vme7_H_uYSI|E zqPUaPX<~W;cCjQN1z*HW`>V)c&bJhO>+`+-kXA;dM@0tE(!}n8b1o*5iB6vanCe82 zdi;bgEx8^)dCUjX>#z2|tU65;TNPUA_hSDRI_dQ!xkR@|yM3y!%^t>w_~TXz4#dvwV&tG&u}V#m^J1EZmVfD*ZFmk5xv z{kmS^n^id(>ndr*P;McNf0wsnY6p7vM_WRAcT{ZaoI%;#`0IY!mx4t9vi6}2I%#5G z4eTASP)e+s)HB>p0gbOGr75s!;}u#?BB9#7RYtCMb;w++Bei)D=g_NVV%PqnkZak6 z?lLxxT_LInY(WSh`_eZ&GH`7!1ehV7?zi3`K8iiDiP;yI219$ndIRT{r9DH9r*N5+ zU;G(P(i>Xm4Q<7$m9x(*KWnr95(1%e8${zbx0KPW6gZqUT-lp)>($uX(4M$vY{{g(rlao4Xr& z6MJ6n8P-Dak{SKdS09sja|;V{uTF}=bmA$`j&kz=80!%#fAVHH=>82P~#mvAg8KP-m-4k%>){wPFft9tkpUUYlS zV|>%CH8<;*Qz54E3-2^1Wr%k>`Q&JCR=J_|iy|GDFA8^@v8bY>%4^fMhZ6`1o2a)D zuUVh4>z{kKcx{!E-}33Ew18#KGc{ABt=k zoRH>#)CE9hQc2)H3?ICpl5+d~;TGO~b2mgF<+FkeSsg+OgH49d10{zF_lgvv@~BXG zgUkk%_sMAd6%C5~nMhC#D_lr@v(Bm0y1ISVgY7Gy8lHH>$R}ZjPL1_OX?87n9FKE9 zwoB1J!SnRyx!mZbvniK>*W8coa`gG;SkV>!gI}j%GZtZUB+q|11 zRpz)L9@{zn*DM4R2Re&6a6D?1Ih-ZV{zHN6%_+`c*1EsPGGRYW2F%rox%$jv;TplD zqhPqYWhOd_ttuU8DWZ55DWAmWjACVssA;p49L*QcyHiGHOvD{g?Rh`rSvyyH%zE~g z&%ZOp9TD}syGiabE8CZjR#HumS>0ZJ4(6@JM1gkyK~GBywFryIoyYJE857^dpUEG8 z+`GT^?Lo6y#H_rD4|%E|sizXEyYDPL86#S!rz+C6nI~gJ%~O~(TcVt&mLbYlp{FnD zNqfzzuhdg@{;4MaRL4{27xcA}r`5;4!`_aX3zsjPdsaCZm-r13So-PR6z98I)C!Z- zqM5RJtt`)~jAovD$_7@ptjTZOpYqQO^8ZcU8Tj!_@^UZeZGm7F^#><<3{!ZETByov ztMjgvd2S_*RRY(VRdQ!zAH6n>vgquCsMn@tPSswULICw#SZpwn!W@!kI}N-~;yu)z z+JyIPapoVzY@B!Y2(PWx=-fx7)}&{KIU8CB2sPq+YMl97nVtZ3vzUjgU3O~QcE35F zC6KLS+`MJRc|281+slAP#%hMnH3t&a^mwD0{B{ zcS4$+e#Hs-8CG-_e=0p)%iik9XGR*;ldjg>AMmq3Vb1AeYO1Tfr$y1^V?Fd#u7vWe!_(5mMrNFr&#H>8m{V?t0kRdb z4a_*@W~f#$S9Xr3Yes}N##YU#aBes{DD0#TGYn-nSM5eJXz@q=5Hd20p~FiIliX1s z4!Jm-zVbu%lr;`H{X^*2=*wv4tN$F;e}?J@1?}Izeg?h^t0+4syiW~fsv)cz%Cv2% zF*{n&8HNCn_yOR*STLjZyk^t{e}lV@DK#xnu!s-;FnwAW>Na|z(CXM`XMubV1gnS5 zvrI2A3jAt9Eu_;)YUx_&#n|&q-LRD7@61AJ>SigwY=UFzhJuNe8hmSnRMo(Zy61mL z(K>(o0jZJwbU=@Nxj_@VYd0{b!H{M8bajPUnacE%KS2fof3s(Z=KHviU6Q8xzT`XL zme{3!c%1nqN$_>IB5;zzO~eOg!v~+DbKkHX@egt{71EK~Rm@eG6f;+`S&DMqhX`VB zuEGeV8EUT&t;^mDc@SCJYo=Hve6p_no-uYv1CfWg{h&lF8^3VBjOyEwdE+{hxhA%9 z#=z{L#MbbT&&F0x563n$oU+-Oue03f&}l5u-LA%(Nll{+?*h5D$DOU=O^yzAlBbZD z=W3>8Wq0uA%%+HD?gnRp+3bOg$aFYe>)?Y(*04#0`4zHl{ijBva$9n-u4FN*Dp;`z z6U9)(V48bTV|Qkdivh&kxosNv%2~XJWcOGbI9K*AaqYy=kxLV+LWw8s0*gMDd=r|g z<`J;Q?E48=q8Wlp7@!$~Ged>4`xc;SO(g=HEiA2sLZ`8pdv&^hCvl$8)q%&oDcN zp-9r;8x&p{_Kzot@s#;}lU16>NlcAahj&1Fhf~<0Xg4w%c0cZc?qFZy{}?sx+}$4@ zSHpx6PD<;0!L2?$Bdm!YI~!e%ofzRdWf$ZZ-bq0w=edzM1vwYZ+~)$4C01&t!cZ(d zA|jh_W}a__Yp7I#D1Sot)<)`?q3y8c@)=BfP(O_{49;s+?%Q*pi z%{=sf(H!TxS0psSJhaw4d*^Eo8cp*##Y+1A2*c#P{`oZ0+Ha6#R^ZR~Fu40DbTiXs_nU|QjNO8> z-;V4A^1PpQnz9lS-Y*hre{3oFVI4?=R$WNAF=ZL2g2z4+mx-Xd_{3 zz1EkUA9lxoh)0qOiXVq_`+RK0?9cMGF&k0+q!f8qlp^mf{hKu*^e;%A23srz&5|}z z@IX?>!B?WYq|QHDb0+@`^uReMSg=c=ong#B13O+M0KU7*H#gJU$9puDhAk^WFpPWg z`$-fTAJdlXw*Zb%Rhv0BjT0Igib>sSe_q0GrVI;`){w|uJqVqd<(}qVt5Jxkd#%Q- zo84tMTXmtWxvIN(xeD{9qb?y?p4?|%qUSMZ&iwaw!0f@U+mshR>sIN(l-AO$RLwn?EPo!8#lS|D&-#h zn27BxZqmU9&f?wZ1{*z}*m5;{grAK)?~HmY_K`E{-H`9T%U+n-vD&w^b8-(mI)8)s zE-LHzv@dtLP^l{-iMJw)IQL+T0Uk*{70)<}9}=vP0*?xJ&qGUR^YU`$u_vJt8({CE za!}n>yQctE^$pF;4vW!&?JTxP);_!LH85Jd38b9GKi%>JHc4%EMrFY*E8I@$!%fG= zg4@x4Lb%D^6yc{J$yprf+}#_0(^-7GAce99!51H@p2f@FOqCG)tJ7tsL)hfw4GS+S zx0B*#C*7IK?%g*URAcukq;b+W0u`24z~?HjOW}_8`dL}hUOzx2%y4+9r)aw$msFoc znF_mInfruK_I_dD{=&l5kd0shP2dY49uQoj@T3~c6T`Cpvxm@Tc#`!mMF10TRVP+d zCzgg2dybj@ir2(&@7swz{pW15{*!?IU1$DqGMZ&7onj)p14b~Tr*DaT#Sli1v_$q>$Qxx|BmicI@pNK5Q}C-Hmo8m?^U&Xl3V{oM^a zS0}dgcm8XclNgU~NfD9l+80B+q=rw@BhRT}m6QApuTn#{l+>?#!+pcUiHOt&B^`g5= z&Ds;%21|E4^MA(32iApEkfzeX0q&^mdZV)2b1M5+=bXQS14Q_^|Lh;sz6i$tB+6K{ z1Bt51OB6@HiQf{}l{srSCySL2B%O+Tad3&uteHG-T zjaMTthP+tDb+3uKi#_oc=2g}H)k@2A&Zzg&^*h%xkga#!lDF% zk~IeVaRW9dD07XVXn$B$I(&SYY!1X?Ugj*u#X79MiCfu-fb8w>%)hwLpuXWO4$4!O z)t!_?EE<*yj1)j8XyO_F$lC37Tb#v9oyE7wwmc{|RJ+QU0t9f>@=!O&D}a3qr~33* zkMlW-?lkKKI*#&VY6BmZO4x0xlN@H+!A;rm*Jan`cytm~ODJoU5MNkP`=YS87G@Nv z;os<%{Tpf+dXF(TaBJ>ULMaTiJ<>k}ydg*C?9KOfYOmMnMXuQoNX+qOVcmirHrTBM!8H?o2o4jSVt>?zXG z7xFr~R%RFYJDvFvauu||`V$CokB#(-MgJ*!k_Dpw6OKv~SPl5J-yi5E9?bipBnH-!DIX6?{2wHO-e2xLE)0lg zjNsoT@wNIP`IjCP*l{cW#pGUaBYEg`7-?oIgZxIC^Il=OpCNT0eOZmZh;VQD%lMd& zU;6YVaVqgk_AfA(il7NcittpfC?XHw9FyaN2M7V63s!A0we z+z&FVmYC(lVtY?aNizSisd|{ynbdLknmAiy)KZ>+JtPZH~yA`^oeC zw4eihagDyb=ig1KA_B4f&V-xJ;#`)wWXajPLVv!dFZ_Ha$8Y1;M^j*5a&`MB3QYJy zXUPr!kG=PgkGi<_|Fg*gi>`gIHnvft&Gl}36OA_1+-p)}8%=~*Q%xl*BDPeKLZwO} z0Te`Vlfe7FT}@lH+S=B(-dpdjz4&P@QCl@jgaFnSrB=|YSgY<5wfGAnBKbaFGw=6i z69S~4`^UZC@8iouv+wu3XU?2CbLN~gXU@#z-9^VbUAN@@MCuRvrEggcA&Fectk5)X z^Msw5JV=iHxYIa?_))0$%ue%ZJ9+&2PwlQZa@~|2utL6-t8g)CORl^`* zsxWBPI5+)>V%D-bR3jF7W9mDV0pr&PA{ouhg<*-LpR5VZJ#wsx+q;Z4p(&HGCRXbG z`HXm_Gl818`AM3VnU4~IpY^^0Hu2$SW@vE9V3zlb`w0vAG4HeNdo@4QeH09DOUY<*wzft(g-@)bQ&;(-}4Q zN3Vi&`(E$+9s1Z-T`lvc@2kFk&eq**>-Oh^)=u7h~B3toOS>5*p!+xuC)6HZXuJ=-zYe*H(nd$U#;GntlQhu3yw4ci_9L?lIQ;ohu zO>>=gWA^k!Tv`8R&(fUN=&9>Jo{{@FxA9KLc2Yd{9Ji!1FY<^7X)fB=udj3Id{s8q zuk0=5#q{(mJB;(+HFoV`3D96zb+Nvt+`1N=Y2{qsXAReMNQP#b`DM+un?qE&{-S>HTz&sQr zFAgWq*yEhHrFyHAcwTJUKAp0C)n2=t9%cu*%1$sxh25$&9laI917b32G<^_p&9l?7 z764_BSGUXKas9(CM@&!PR)M}>c_yXW=1S@q?}LD6<{lGesfH#bOu-P%u<}F8kZW9F=rkrv z8(Jp}C4%UmLj-x340Tr)A>I7;(mZ#HPUXw!$P}}G!^~`H;SI;Z-14RNKx%%2xS}D) zTveW7&@9sAFEfh*bk%~mN)fe}Tj~RaS3r(*zDn>=w$*8qzep5T_e1)OM1iHhI(7wG@&jMT31HY&eCF--lpy&Ci5Uu|I}}#baGK*=$?T(OfMolI%!-@SGWS#55JUTR6^FaA9gg z(&-8X!gsanRTDee({em-xfv9pmEQ2|Ug|4kFG^580zPC5pDMgM6aYg@(=YwI@UpeI zJAL^Du}Tp!6&w%tO^eBxgaT=DYbg;Lc$w!KG+Hk2HE}&9&5FJ$2Dp7vT#tQH#9(`h zXio|4`SG(x6#k1vH#RXq*FFhd^8~%|4j6h12Q_q|L8IuBo|&D{CxG{*QNs&@Ap>~- z6u|4u!h;3xscrcrw=TDQblG43=E9L2bNw9=2l0Ib%8esLi!RC35JlqiU4Ty&?W=_? zk=2L$pQYd$Cc;qZz~T`(70Oq9!V^Y z@2nEAu`QJ9# zZ!733mF9%Sdu-{51hR7aQ1}>4AOBs0QQHMp)!OBYeM?Y3 za8~v55Wy7qCm8_~=+8q!9DbF|^TxZ;1j?v-N2}H_j6p#VkiwyA66Ns_&pOwtKEdUL zt&b+mx!;%eSbPc*+_eT5?J{Oni$V?F{95ij?)yYY43zx(z>_s`TxM;G2_g9a6 zHq2vHa`N6MwG@aEA+&LccqBnWf z?zR2gZ&JO*{lcEsznbb%kT?n@zA*#~p$a%|hR`fpn4DVRG;D_C$yo!bns~nKwY6#? zl=A7%V^ty@PNnlfTf|S94Ot>=Rbrd&3o}hDa5}V2fK;8;TaHiJ?PvazqNQKrF2|Tx zc$@cGchL?G0&y3;>#-qzQNMS7w0f)Cw5N58Pjt09%J}-Uv-+b%O;e^Nmgp~NJ>AO} z5!Qs&{zH;Pw({tBM?e;$0y%~vOA{!Pj23W{5quXA#_jL>qp;=ZyPpozPY0*ZxLo=a zh(0E`W;lH~C9fb$pD_@{r_Z>6KI5DYe|j+@eM)@#Y%}!vtD#TYyEf`BdfmG=X6ROE z=vHLtR&43kox?3rxaAUY%kFW>bHptR=MlR&eazdlJdOtB)Nq9&cty#J%;P7LQ^H;z zXHvMjdDT0HWOu|go9S^ke_tAZGMC1?`+mVR!QI{WdwB3(et+qrPx@9Hu6#W674q_Z zKjUA6-}`#a|J?Yurwd3HX*s$oIdy=s-gU;&-s~EU@|NouJ(_YLf9$}IB#U)&uMWR9 z%L2YWV)^j18d?*cvZK&hO`J_ThW{C%f@nOot>`f5koS)TZumBihpFD(`T~p@MJ_dP zHJdEX#LNCk!Sk$-ahhkIQ`}cQfS}+5;VYfXG?_@q&~h~h*M|v z6T>8G8h8hmsH+2sI@CTn$oQ&BPW^xR_*(YAaeQfy+=%iXdjJ3OUXzg#^?l9%SMz!4b^p%xDYPX!4T zxq0-i42d-*U1G(atsEa7(=zuXe! zv|SHP6a8fRB@YAf_PZp1_-+nDstqmQXb8J4GG0f(Od}GPFSYrpZQM9cLM``HUKg!1zu2Xlpz_KlPW`_)Tts>Qr*Js)H2~uUM1h ze{)Sm>KeK&rof3p^$%Sa)`PJbuS5uvId{Cy3&yLYBW*I{bqakvD?jye#0*krb*UM$1*unx7_vt> ztEa`tFejFiqnyF4BtOr^F#9wedN-#jH&c_z)D&c5=uWFpCWcV9uJQ_#sUpb4@SWDF zOr5!zI!&fdn@L0XVutXvQsra7`oPQpE(duY5~&h>3!uJB?keR*Obk|CWuR6Cnff)L z%|IOiwi(a{xIeVD$Q(5!GDF(Ec#pH<{~Tac|DRw~>oP`0b$51DH-H%9_a$asvGI!5 zVc6x_2O_^UxC^i&xD^{(jvtKgE<=6Dk>eiu1Gea`B6gy-eE@4)E=#qrdusN-6v_f4YA2d=)u9ff70<4yXPA(+3s(b6d3rk#!6T&$gZr)w(A7aj}x#~IB;TgPu9HC(`@sU!|<(-V{z`i(TB zkY}}t85nI*B5h&@cDtODlIga;MsCkk+a9KietUFuRH&QIZpdvp*?5Ppn3E~n2w`^wnb8}#^|FiqK_(1(Zjs4rd{g1qVYSjeYJKJ?dlBL)#=kS z;73@8{;H?H6srwC(qB^tag`qZ3)qdX)^#c9ReTitol9U zuu?}m#FGsJ{FFFt|H7V4GR$({vSY9`8D5aATupPeuo89Gg}P18X3gnhV@`_}(~^ZZ zg*HC2eA%*PiFDvP>Ty=BNxeJp=`3NiHwH{r^%+C=5)*@GKM5^U=tY5;ThgI zqrhB&_wWF{Qr3&p!RZ<(TkEX)o15PCrkoGS;uBIIj7xp^iLySMX{|NE2eagdwx@QR z9NSTm7JMG*GU91Qt#5 z`_qVQmkp9)uznR3?EInKG6EtdgZq`JS1iikQ2_B)hwpH@c4y&Rax6a>TLk1-{(nOb z_bV|(A0}J?L!V&O5Y7{9Ed%Gd^tRtrK_c|=^=6H2;^|TQV1g0ga<@K-$#Rp z$@h05GB{M|LMDY;U}FL)YzJ9 z&+sv9i*P9#=T5;wy`K;&NL?-|$!`U}bNH>)yt53sW9FSxdB8&5W-Zh?X4pTdu`g4! ztcUz_oGwC4^2$=qs>j{+MsUoLF_^45BsDND_5LTy{$L7}rI!DJasz(0WcZL&zxll0 ze3s#;s|QpzKMO1;mn>psXmYE>s215KYXS@Zk#IwwKF2Yx7VQ5Jiu>TjVddVd5*3?V%^jNU>a+l&Bejq( zZPREU8+EmWTt_;xr;&l9Z<+x%IjfIxR{sl&?8=<{f)4F&_PzJG3f>{B0JAPYE=|Og zQsEw#{7RT{S&@|YP-~=(=Cq0NJT(z0!A4)6n(gHLCHzAHnzlg|$**XOXLHgVT;7;G zPjAB1S$!%`O_r3->d$LBsPk8v&2!8=SGcEYRhzb()40WvjmgCnJ%*>ICE4#_!<#zn*!n^*uRlM`QD;|E)lX@L0Q#K-diT zNX|0(AH&^40!AO3n;ES@C^GT&OX9W2gJKI%B3icj6oVl$KD5rQjFX77uo_ph`uA^$ z1qlRxPnJjZZ|-NE)#}ArA^-E0NC@-&Djt;KT1NIY$Ohcj7QmHe-3AC(@nCW=Dz8C2 z%qj?SASWygX(jzf<^Mt3^eU8vl&2Fjo6DR%(<;YBWM`X~TQaG{M$dO7@%QS;YW%5fQUYi+(>T7F$BUr{WCX;gozFGcl z9F1GWx@MdoW1eAyV^S{{ndeIP(Bv1x$uEa+zEl#5Y~@NIO$45U@&PXgnS>rEbdl3E z=Hs>@XNiX^85L8K=HO~jI3lS3FR|n-VKN1w!4H0HgBO(;%1}tT?GhIc1|W%*ELEKW zmwX)NuS`xfQZ;#&eww+Sho33QI{na)vsfq#$ow&(_t8P}{;x!;VK`G6zbM3!o{~!{ zj8rN&Qpx&zkwiKv-f#wExJiz~OoKR8e6WNMa}ZAYKo4dvmS7s`gSK~4OKs*fgp-v= zQQj-D?~D(Q6ReOeq|`j3Y3IXoq77Oq6~2rL>^mImIsvYeoD-fi=P@_B>>bA;QdFkN zW374eZMs)Ts8@pfr2BR%GcK^>oK?@bn|A4IgTAJ=kJGG*JTlpWPjQnRBRP6IacQTa z{#rXJQUST7&TIK!GG0!8kuc70Rc<=ZjX82ZZsq=GjlmW*2HRl#kE}h8l!2o4P_%)i z0cazaecLZBas22>$?8f=lBnb_6t85@>nxJvc2!_Pw`J~P1ZMLXcFr*t6{_?y_DkX6 zHSVa-u&=ajcDEBxm#}sm+aU;R?nprf6mB1FDKPND#@F9u2Jxts||*@J#`( zexjOm{fe<|$Pn>)$b{Dqi^rrG?NTgOqoxGODQX|?EOU+~Kx>U}RYr+#;;W%mena(W zeXpXw?t1(Zzg(l|;d53Wc1168y26a;DEoJ7=c9#&`hX%VHF(9&eW563k6*z&LRV$dE9i)O1^qqIk{ntc5`+w)b5 zs67p8PovXS?6;?w1=(;2Q7Wmmh2EmA#go;2S^$}*wy7tJw4|c|G}E@<0>iY;bleE- zGkr$;6qRO~vehu94Lcpdekf9l=(`Hq+L&WUylNX;Z#qXk=1(y+zH3aPp_J{$nBiAG zNRf5el3X(6uNq9~w)PJ4#_1|NlXU>Rt<7iUx$lT=b5^$sKRW(x2_2`aaw54V@V{B* zQeyL9qFw2FHp|a7t#^ZzRuQC7#na8OY|M0g#Bg+w44acl4Da)EgCS1tdXeU>i;#Lt zpvm-PxE762O43{{lCYxSerQ`!o8J)y**AUDJfFd5NIJ1Js zLLPO%W{jDnJc*btb$j{6$f^5~->{C+WJkmwuH#TsvNGVStnG~y+r(Rq(U^%h*^9NO z^-i*A!d=c9_KbpCO#M8@S#l|*;Vsf zyYzE^Tw>S;S#5pt{baZ)S(7A1HhQz$TlS2*+xu<&77`M_jo-}=F2nEgt-TlK|21P{3SfWMI2zD71*%1ls?ZUZSRY zcNcAIfSabMt$b|C54|1Q5z?$}8a{|-y}`z8sZwt8Vp26aE1s54_KB+r*ObKFwu2Js z{3p{ok%w*x^|OE#vUKOYIe1s^1RdJK#-AnD`Ji5T&$}~V4fPhi?|0?Coprz2KMUNd z#JaFQ1b7qQOK4Q^3;$2@`G1nn|C4NY`25ewI%GB7F_dDKTodsJ-~02WXIw}369S)f180XiZ;F;^VsI$g{qg0vvjSiD3{v=rDDvS;TcUaMfO zn#8^FHX5x%b6Z^d*=c_h#!C2yUuryBGGyCtNnuGavV61sYcc-YqCql@jB(~_aP<|| zqv{dczjF{&X7j?G@jKNoZMJ*vHwbe};l1%?B&RZ;2yJ|Fce3#OWSF?gBiuFYZMX7D zS9H}UYi{GG%IT$2;NMIQ$g$YN`)UaRTx2Ecl)A24q zplVexLT<6bQ{2;L@sfmMm{G8lU#1v~$8aI2vwFUGzlfwM{Az3ro>;0Gi>2dkegnPG z#mR4ElS^R=EaZzR`DI9%7Pv=L4Xa_hPBmQ3^HEtqL=9>jdFW~3_F-*A28`bxQZ)6 z0dsLdj^I2t$2!d|bZ7Mxc__o`dgz|*Z{EccF|O_Qb=x$Cx9K2>qM*-vIDL=WZJ*y_ z&>xYS!@&nYv4xC##{jN18?}5ZV|FfN#zVrk+1F7yG_4Br=`LC}*3x!dhJAxlGoo5% zy(B|+H2ebn?|EK|nKrhSzO23!pj|g=SEKmvyR7sv%D!3n_ z64l780IBJ9Z3-Xm;sc^28J^^hz;RCdMtS%4!yZ(i;;gOO%}Uu<$=*ozYc9)l&d(u@ zm5n2{W30V|%Ze~@moT+To$-zo@r;jfWQI` zL&im;<<*HhV1W`}Y>fywD-SITOdbu;cSivA=nQy=lSGh4+d0S{B`|KLn2b6*gH7WE?{!VL$6fnXn zoc8}B0pTgj0}nFcn8y1K~^XN=?rB5AcXaFSLqYql$^ z_b%nvkd;jSRb~i~p`T zC&-qyT<~EI)bHm&m1!8;4{ufSu~LDiRU!9FTpxJ~V-_y2h3Pd2X^xgt8yVj+?eaq$ z?8xT^{3{w0_*QC^6pS-8D4##1$Mbe zxh;RtOiH6`ZHW{B+j%S0m)AlUbvqQV( zYIEt8F3}9y;I#jNDGUN&hBNJZrDsM5YZ*VfTC9m` zeJJZV^LjM3LEebv@Lw=kC6W~*Kul{4Bjo)sd}%~%aYsevggK`{dU3sYf#(d5{YrlG|8Mb%xiDMit=FQKTFwbqI{ z5CIO&fqKEHp&pD|qd8CqILv+&xYi$(tcT?Q{m;%PXRlLK|{ zR|g4Tj8p#946{(@kX9QD1fnk5s7Lc3fzszVKUu1acNN|*{Q+e3biSJ zGMwbE=7crA+GrnWZS32MOvipb!rHF_$Qo+}|0}?t%C9TD;Fo06x`IIpLw9&a?AbHiwRM>j=%;+e99-0HR?<+%q zRt~Yo{vM##jIj%6w+#h4)WrLHfLhDd0zD%a=q;x2Mn={r@_(QBAIYIp&zFbL$zKm2 zM*PSqh_6dCf*!qUDA19KKN_IcMzwT0YADc=i9Z^kb_QgDK6YtN^AA9L&44tz{`Hq?*Yu#p)g0J{b*p?d8MV& zKMaLABI!qlIb_z5D{_86HK*zK?@#2|$uc*=ER?>oTE(bLGg&rn9+XfpZGMPMnXmK5 z%zp;s1={EtMK0-fX{K`u6@Xw`yp^BVM*dXsVOjRA(tiuBCu5DB52C${W7m&AxYOW_ zJ6FD0mQ7m7S?=y|UvPV}^HW^ZVm4`^2CgaO(X5{**6L9@XduxmIuj){QPC3ka?UdQ z4;egjy;>7c@NX9zLYaU9E0q06Asb8}kAaC5>O^;GQde2PJ(!^z4O%=_@o04MjRt$N zSE%w9;ze--By!gKgY|byWoEdhwf7sUFma8Zj{#BXw4Gv!sKt5rJs_1^`c*(NQDTsq zdP_#nrc{lck6Kr?Izn4ZusRIohAbdLsHVg^kwi3ud}0~VtbyN{^N1f)^~ms;ss@*s zs>dhq-R~OPRse5h^_Aa7ek1%g@XMevMVE0lIJ9d<_fHu@WV_6m_*;nE=bZLSwHzp# zTDJ|4HU5$@j}?Qdm42$}9H%|sP};f+<#@5{Z`?&6aaP<0DV(luwvp5l5bksxVb4|l z%Lg-A)^53uzxhu4x5)GW)=*xL({+fuG2wrGU0+T9mgbp>_aiOG@;BV_am#-d-Q+%k zU9H=I#kKdRJb-s@1PBEd!Vw0-9R|X8`qpqiLH9d76f9_Ir<#a!OE*7Z4yRVYbT{V- z@>#CW7!ibca~o;Kv+++bun`-TvP^FZsN-g#j{uiJHV3&*ol6WgA%&}!nL9lKi0{$dTYVybK6 zx5#f4k1>*J_>DTN6knP37%6C^(OHGr!2F|2ex`)u`=1tnT{W*B*g za1<(sk9t$s$i2sH2v@I}*9X11D>4-7JI&VFx&ago4?VvTf>CXD)?@o4!KwG4=+|xB zXbrmv*3CSKqfu-mws~upVXepvhA6qi-iqL4>v4@{9_637oo$=&cG^#5+-H{XC##Q^ zzb@tD#|wCqD!os83u8d!*!`%>aY;}<9p^qO21ifJQS@&U>k19Ys3C;A{*GNAB>KZG z^<+(7YH^Bw7o60UKMQcno=<+|IovSNz5Fp%Y2*B&Tqa^*6tw=`Jag_j;yKGMnC6xsr&^`R}H9)25ixs6i~6Hh8mUUVG2Gb>%f z_H{nZv4eEF)Am=pRw+;FAjR+D%}{&_6eo80yb>DHC^?4|Dp+``5lr-G)#h!Gq9L*E zQ0J`2L0W-z^*k~sJW5ieF);)0Dbwjj?MSIl*2kBSIyms5mh%M$HoptM9m<=qfv=VB zjuYFA6BkYqBF@AV$qI)MlG0K!i?cpX*lCCLjLcoU`SySYk{LNmIQy7EAor?b3Kgh1 zWOQxfgQmCjAw9);n!^=f#VdJ!#4f?5Me2*C88-E1XdXh98RSh_QS zesLhN1d^s57^FK0vSB#L(*uyw1>n=9F0Mi#S%D}D`It6BAE_Qgr(BFr7z96SIQSQq z`1H`Je+Fb0-Yi4C(5B3vB~m7ZRq;kE3Fk->R#GCbQ;$uQn94LGGW>?- z#wRTa?8I^2LdkK~h1EY*=?{NkZHf1|Iu%D*m0QVKZG5S;m%XN+=R4T!V@oK1(k^Tm z32`PZp=|mGL?n}*H5s(ZsPuNyebJUaoBMpIV$k+LngqK4L|{^1ty)i>2D(%FUY&h~ zwNR#rW_0h>8l9XM6nc*%f!->6G8vvwZ8O9FQnO9-B@3*zz^jy#Ui5`WndO426YSyA zS}u`UWmCye-!})NzY-%%*+?iMOGDZ7W!sJHk-Vv4q!nQy#Q3VEomwn+savF0#M(nq zQjzY-@N%*k9Y3%M|J|%=YXUhPW{dvS&7t>ba3MuS=$L+GcyObP(GS*ovj7YSdK{Q3 zYh;{vb-4YF*6RmH$s8(F7We7&g?AXKz?fN^EdOY=ZHIHiKf!xy7!?(nifr7NX&p$~ zc7cq!gw>~)RW!9e$tW$|ZIwIzE?w+lSQX}}L0C4sJ1|@$!Zv-|@r5)r;v2l!j zW5;*p0qmPfrjMa_PP^Cegc;vcvNnxh;agl?rRIs@`d;wk^EAKn?GNjR^(Iz&pMxY# z-o&Ww_{Q|lzLzyV*e}GoxY1|0@$p3Z zv!H3lY=zTyCj%Akk_V5Zc_OsP?9Q>Cwafi+A0q@ypU19ZY0 zK|JNTz82>;Y32`Qo0H)aVM)nbnpg`y(~X=^LRp$uak}}+7awuSiHl?rFrclR@GXpn znVnQTbnG@Vb|+4O6SBkCXu$O5#lC9W4W6j_no!FE6&BX~nt|_4Yz_&B;SgjKh11^( zAoNp4MWx9PR#f&;IDKJIlqsW{p$n4Q+bB+r%ws?{Ewv3nr=^d+)yR%Tnx#xjMn8&0 zqvkq^1tNicDcg#WomRFHBakRGW8feTx!RTRNZu+#DLPvli{ex-@zR_XoFcgd<}`j| znO_J8`Z8#S`M4h{OyOggD+GKxigF{Mf5|N)qkjXMOk-e*!P4MNrCBj}Al#`}qA|d{ z9-g}!yp5>m2tD-|B2l9L2BFAHlM(fc5cMM6f@8gNn?sq*CRr{Mjpd@Kc&eYpSIrw_ zBhFw)?iLNlHHgl7fK2!KbiwKF+Ds({%>FK0{zG2-9+7;r@1;mqGe7G44?pE4Yk&0J zVT_HIbA4W(Fc26<{=BetPcnRpnGzmLgDUqoAFSkJQs#rdwf4~OK+pIZo?ssv&$Dvv zAv@YnWVF-5dbJR$G-t-khCz62&seFKEB`ZNbW+z)-m-m_`93Y3u)%D*R{Jlw$nCw* z{gb&PipxD(im4-VCD%;z8{Q;A8jionPrB|;NN*i}6S6z1(?@`+J9ffO3e_baAUV(N zdGLB+w;l)Mt~WSWxS#znp|^BQ-kRzUR!$yh{j2i+*~_Z$fzwE(23dXx*`o zga+~kT1qWggxagA?U9wuhc4r^$mQ=Z1J%~;2F--og52Yc%SE+9sAdtpsYX^~-_tOX z?@znXT{oG_bzhGg^e#>^MCiSUH&*oJE~7jbD|lRu(F?_cUnGn4<&D#f3($VCWy2nq zLvVk4{oa9Hn^NgdBp!?FnyhfVh{2a$!YyVrtDyB(Q$?g`oUsbR#Y6CX^)!R$W5Is$ za;K}IgxZUl;*NDzbU_=_WOtn|Ti=;tQERs{sX_Nntrx+?K?C0OSjg8pC z?!5=$R&;?_MhKV<<_;ZAa7?1 zO#38hn*sdwxHq-bn@4lcFJi0clbg4>TW1=}Q_)Y{Vcu7f=+2+HoPA;}M{lB7BE>5k z-FQvuwKqSpJv4Lq^(JK%DeX^P|2qt|V%sa1zG_BJcB=|nXbrCy7T@7D&< zHKFCZH6EQd-Q;NKUt4R?%Xg!lPTOUGTzIER2(>=xZt6~tb5{2|UFC~`y_5rv3}C10 zjqz#BBw#POF3$pgCN(fN@ft^smM?ZWj^m)2#{`*mV#YyphqJj^pg3smf^2Sx_eUP--AQn|m}p^}#CAEr_!n!A565ah}J17$Gu$d(_09=a0Rj4Tk|Z;K5SC-^)9l&HkEG*F#! zX#DFhv2^OHP@Z|2H@V!}8|%K~qCM8UXjN1F2&(B%+~oH}|>auV71v*D4@Nc%j zcXHrg=4YQv_P!quU4PS^a!qn)cwO(pl6dCYehPkguyoQ1MufBAQ|LS_0hvXy2+FfK zp1!XnpG~c7^Rvp_#8+e9-#~EmzFwt&5dhe)Ttc>k8-2yJCKCUD5p6S6|gzS6uRq zD_VN%N@iU>qolVkK6`!%iKSP!lw96hSAO+XGiUeKReY^=-W4=5uvetZ%hBLtoVFjU zVI8liel5zjE$6Az={Oy%XP(};%xRO>o_YEgmpScEDQnlHDKp31xQNW`5!Ip^DNFU% z@&!l{HMEVm<852-;#V|ogxpc`nZdEs4QG zK@V;6vA#`(UP5hjVv0>^S>d$JK(qih+Ok64Or9bq`7N#S%Uq^1zmV2TAP3uEVEL2# zz6X^qGp$mk&I(V;C`+!3hGBcGfaqp;YKXN4b(vao>zwY_`R1`?*A4Pc*F~4HGz}?# zLsMB)($YAW^!$Q1ru9Xv(GtlipsG>z3tZ6bSw5|PByiiM;XllGZf3XRfLxolxm`Y{ z>;1g*mG=?p{rf*fmj&~Y;Qm&G1schbV7U0dvI4`a<1ihYT4z#gRMe}h4N^}sskJt> zK1ltzNv*f34MA$iq&C=8JR}xwA3L>s>l$q;%N;iLX_MMyQ*oKMoFdE~CDp4d)#Lr< zv0RV;Ve*zMFQdu+#PyTl4u+oL`yU^`PR=uzAWuU8%|*MmFr1I`G@Y(%wxx~7l>w?Z zw=SHlE6M^k)wrk7BZkHEVNVzT`voV9#p{ZE>9x=qB9~e(R(`6`T9*}P;Qi7ux;;6r zCcJuYwqehiN7JxPJWl9FG+3;LHf@@b5S_`oqmelVQ6HrveU#RmWG0dFjwy=ZgaGC9 z{qH~FyR3;5@>-4twF;*zZ>BtPZ`mnB{=zVq?sg`xERn-gcpG6#TaO|%nR7bEPUwbk zB^uZ#I9-#Erf_SNG{s-E{WF#5{P);xA+;D(ynQpL}LapikZ=ht(%N%4;Ne zpinwyGtu-p+6X>qGqTu&9J{#jI&-*0Z6}SYAKsqzEOZEZeX?mU?32IXkeR0!pv7LM z)(LOSbgu+s_M@@2_(&rx>y8FvSYe!bo6J;qH=^@>32H4GF{1$)BRJJso`(uf5EbI; zr!Nb!MF>U6el$CoJ|an87gaZA@`bO_K_`r-^*1a+LGTXe{aUodsY*>Te&qtz2$L7t z43t`*MRqV-6YpM2I}EAvzBqgS{NCE|?5n<3(pwvuhsDra8=XB5gP}H7a(vy@y|smN zuAcXe-rAzC&OM$i#Vud`T3+TE#VKq_f7RZ@eki!&DQNqad?LzkZ)r zOYinh9uteJ@|?CqX(dHEZ?{EQdKHAbuD7pjNF`r1uSFeoG-EkI&3vD})P6t5X765Z zUvc%B`j^>PM4(=`-C$pjDFEnD=-EYhi|9@2lrTp@Y!CWhY`EvOGt5;$F)<&^^XTkqpy=ulB`2UKM z*@pkWc12$11*Q`|JDP#j=nt&dKIIDx5JL|9T*>~Z)@UDMQbLDCcuzCm23BsSz?L#5 zB$*~F(>KU8bNQ0^$uc41VtT8y_mOPIh@{l9Ds`$#VMMn6D3DX%FuektakQRiVFi-L ziJp(Xk-GT|vBjCw`1q*4%ybu*WR9c<1;}YX8JXmdPd3`hYBOW>k&K~n`^gYoy#GVk z!(TBJjyV2eU4H_4n7L0 zpe{xVoOH5JA6^YZ1se6X_{bV{De1#C>d}Nci>rSL@|ne4P9Q8)iRs6OHTp;i7x~?M z&J^qfIu|vD-;L~srSi^eZ9%?=ubx=~w@0q{#?|u}3D=a&LMX>Ik^$}`Ri9~ z%0;A5vi9F?$u|v)R&H8sUu%81z9gT(D`l&FXvf&HP5)*y|I(J7yMkIB)q1#}Zxno&CYu-(^=pw&=Ww=?pD{^QhnqZx&2+?K!E#$9W_-t|*k z&EX)JSlobuxQ<@QRiB^J;4!N-Cs7d$P`h=^CY%ggIdNudZFp<82QlL-x=AuavMG8POi+n4QGMchdydAi!bXc zOOh6~XYA_^Uj?n_HPL^j({>z)CHm{_74?b!Gtk%V_t?DCe@UC~KdGO zj^!|b`h7RRa6m7Y;PQGZbDy%Ix*n$PA2LFCzVFvOf1797&lfUb)(P}F@HEa6sy)m| zW>`yeVsT|&%W*Ep5VO)-qP2SL(Rf0~`wnai;w20lO#Gc0qLFR13RyH{S!gPVP(}eM z#IIYn`Iw)7J^A~7Z#^%`N9p>!izakmXzm;#YGxT4Iq4tv#SvG$z4LS4mywNr2=}&` zN8a+}>6vFtoR)v|2;5Y`7J>=1_mKSts3%Ft^dEMp(_25I?BC%A=AbvTAw`K66hUJ0Zuds4L!v+Ar$6%ak9WQdWzoj$NA z6sM>C%`j521wRVB11og9W4Pwl1(x!;alnfc5Xng;~@aN)Jw#)9o`B}Gg`#N?L(p_tTn%R6P_a8 zBSy4L`}ZjiZRf%kVbSpe-%Qf_X_9pT(#;4l)rj_J zi{`}KCr>0Sjx-RRBM70M>dnril;3>QivTe67iB+(NLBIPbeL&DUwme#P}5cHA>p(MwD7H9n;ruR(H73tq59a`NF zRMUIq?N7BHPJ$dpCZU4e4%5|`o#~GCmSWxeH0I7?QOvNibyEwei~Q_2?vwo+!?P#- zGmm|4c_M8&;n!k0j_C-O8*tZ zj@o!GPT#}S%45O~&sJ3Lb=pn>G3`OQOJx|K$)7WW`#dhrY4IX6`qLDP72F#av_9Sb zUSW!h!8ez^!)kxhQwc1wuzE8Yei%r3R%#dwkU%dJc%7WAt4j)X#C|^v4K#wz)`vFI zWM#9_@f81-OM!0_!+9bBrl+;Ui&{MhS7h+rJpXe9^D6rzsi#L~?0B(`*?mXMtfPnV3}d+caimn=uR5tc z>~(e{X1#xH)ZcG6N#w5V)Zflq_#15Gv+>BZKkO|x`M+iJOjD^&l{)cT%I|hgH>Io_ z*upQwW^_B1-|H+g&la+Yzo34-m6&wMI|IRS^pNqdr1^C;V!M`Dfv)Ac*w)*h}&EBFo zF?G*5T~B#)OWY@`KUh$53HG+w`8+Schy=gvPr3l8zuD4)ulCw zj_5GAC-Hi*R~y6XIgU95x1OvVYq~Ch^DJ>?ER-#VgWH>2;-c*l#ie;%l(Dvj zU1Z+k2lA|Wa-SzG{QFn1Ha|JBrT}dR4x3~x%i$V<(y(?oVr;cUR z;hj^muC6rXT^Y|zrxdv(I=GPE@HVXmhU0zwq|aT&9JYxJ?#^sHm!*cz3H?a=1qLk! z(;tk<|QBmNQYXp1|#5MYnxP7)dxm zH@%E}e>OiKOQ0n@p?d?(f7d1HH6pGIO*T;2%D+K-{#TaDE!Wv*dAF^HFmB>5aYsj( z7U3L8+-cr4-FJF0cX6s*pjy<%4A1uux29mWN2AXt0p|LLi z%ctf45iJR6qd+!D@s2s6yycGx2t0Vf{^;pmu*3c0>*=mr_r=$}3wDUEjdswg z^*6KAWJAvbv}a(0FZM5(@RV6>You4Fd-sUOPS+3C34ybSMM|#M)5ClCo2)Mw*!7Of zF0LmNYnT$8)xhlliEbS$A`^dBiaq27ckIHhFgJ=*Z$(R7P(`u_)h=U+n0m5pdl(0a zcUH4^UmMMX7@DqCFqCdmv@(z@lkJQ`_`{i^Nh-ubT zMJS`QYIA6d2_~;1v$>43gony0)n_$2H@|}z^V-z_5a6CL*F0Z8-RWvK9oZ6}4k0RN zPesUF!2!9;LoM+c?HiV!Og})0%8ZTy*6ij>)J#n;IIE8W!_fQHYgSGjXno6lCvz%a ztU7tD(M&tM_AuQ7nl;JdwT7f=cWb%{BddB#tJ7<+P;y46M-y<{o0ZS|<>&N6d*vG# zA|IZ)c^~;;&l@mvOz%E%uj$O&L;_}aH>If5TiQsRe7n5MMN8*Tcuw^77DZtd3{lG^ zv1Ir|gEl0uUUOY_vc{gl`JwxacjFJmfrNik&P*x2`m#O13VYGA#M-bMW&P}?P~K_8 zeYHM?8A@*yO{xBJPr0{>L?mKL;8xvxB_qS#xeW{@Vz zX8ufP@N8phGQa1|7eu~(+b{i)2kC_$8WJ8V5$hN8&e~ycw*vPj5cdVH{~dV7dWcJ8 z{|>ZWrLow$4B18==&p2%f|B*i1UJELgHO{3v8WS3lgVM(roXNEh1s9>{B7L zvc&;O7OMd-?HL6>{O6v1_~Er=7X3keF_OG3){ejMDCO-nAHjYojxX;~lhO(55aQr( zCa~Qz-ls3IlQ^dSQ&{j*bd1A^TuVTAEM1 znJ@+dgg)&?1OHU-J7(fw(t8t{Feq;_8e6``6!JPrGTq^toQcOuFOh%iqkt>!J+n}P zw)f1U8T^ojeSCzNweOx``fk7cnBKm7pZ+@)+_7SMTJYcf&}c!+SBdH3E~aX4 zERz1#M9b|E!k+!!q4p$lEVZnCzkhtD8hlzYr;P3KD-YeMGbsY~X!ZYo%lrDa&_Wqm z-+oOnvj9yzoRwEO+SWU(1b>L)JKEl(&%O4?MB!ydANK0VkiD34+AWeLfGL)O7EaEpP6>Fg?LIYMx;m8c z^>Zj~5KHPpGlp%X=pz^&)(8n7qUWsX@$Eybq3UZeNXsx>CWVK#b5>6sSb3Cmo>6!+ zf#$yH(NLed5J&o;*jK%A=jLBY^->XqUDE?j*R9gIWq3!zDwP<`DZ=Z3GVu5`K%VDZv`a%&#-ndJhFv7cf2=2L;CKY3?eMY#17UPr`Q@YQfy6{Er28IcI4HC~4V8+{$Vg8p^wSuE*#Y7Yvw z_WGHTXXLA@w)31yGjn9*X`dyAj@(&c8 zW-mwdXS7dxmts7(o{BYiq^7kULe}k1D=ftDNYH2Iqh_omm=DI{M3zLnv%<)=aMH~1 z#Hp)JWjXkVVu!?e6=AW2CeN@$`qs0xDBSXG?XECD+>J9++sEK(+PrOi{dY@kjps!p zeJf3U@qOykVtGwmFx8ZS+tfaGqxGjh3&No0ZZUZEc9img91@FFWUmzYGHEiI`8O$% z^w9aEnP=bfL*|bPVHvGHm3{Z!cg%P#w&PWxO~tqvMU7BDrCP?GUq@P12_SJ$8e$!-&OT(n)*r^A0`Nh$a5*4CT?ddctn*ZmPtT{P!kJDFV*a0J9%)< zlrjPD7lnx}X#bnab#(JL(I0KS-i~MW&bw@!q{b@EpZGf zTtgObsV}aVE}G|n-|eh{8c~gyPWYkW-nnsS)w$CM(YWadz*lq!_BT!9Ld*P>g8k?oSym9KzK-ZoKC$N zEvtGHr-e9M25Ql;LunW#OEa_i!hXU7_!H8nzI7n}`VSywt()Qer2_%PUuI4w-x#hI z^*Q`wdK?~FD=s?TCO7S@JuKY%G0!T>+L~nJk&Ldg&DAMq;`82x4HMp=;YDPQgS9b}OyFEM?C(Fn2Q;6VQ70llcfziy3l4tHsy%c88)%f)* z>-IRS&m34;_hI$+*6012zis=qr9<8^yMMseVq{NipPFK-qmvdaqceHWW&}y~{17)v z)1WQ0U@Fq%*XrsH4X1}Myx@WhG$hvVdL#AzC)}sYo=Dc8l;;9DD##Z$P+3vtAqoiU zI|_hvmQq#%}`}bd^H@-QfyvkiPST4(7 z2jbTi7R0dmu9|2t(Ri`O{@6jlqi){`L-AAl;6l^BN3YMe&p6X+F;<(r9~#l>ttXcv zwZ6dbvc)k1!9LBCAF%FjA&gyM(l0}6$-P5)W7F(ZqNxgIx{1f=PUnVeNF*W5RfP75 z5VR{y#*S_ZlTRKyr>kR)eUssttT(3*m^IWw-d$qa_MT#5quOq>m9VLSn9TMwcg(!jr~O>ze8kY{yT&QqpFYOYp?xwqa3^r$v0C(M4=(y&5?j}s z5Hy|B}p|tB! zaUT0_4x{0IuKbphyh)2}uERwSZ^cUf<|GUjd&7Lrb-n*&F;0;cGS1|0V8up1=_RCM zJ*-epr%i@Ia)l=L?xZ5th*#XsV|M|brWNw+Z*%l?m!3#Vclu!%Pt%~pxzR}C+=_5A zVM^CoE3Y>p0MiA)EDhWj(~|&nlIHVPVrIn$eZ9VZ4!WgS-SRSkgM@k|JVk;xX`05V zde$eFangB{mgEq^TcHJb<=bWQ8FFQ0+gcLvQ3E3KQ=p3de#5V~q8r2ph5B1WPBVqu zjhAq6z4Ac%+W7x7q9^M`7rd(_fHT9wANx?1sLNd9Ls=0RXo@hUV?JP9gE{k^3*5Cv zgcY~zXp`vD^W4o7c1{@RJ363Gn{hcLdZw`K&(eIf< z+=d9LfM!N&wcjmHT{?sPvnN{L_EkF0tGeHr*q>f|W(b~Mx-{QS825>hfXl%SfZy$2 zPPghIC4hMVY~z^Ae!#g`7ArKAg4FmH_CO3N>wR}ix zqlU!sPY8ljNJ+Z$u8pxqG}SM zlMI1}^d~cc1n;VPZ)t+(i<6N6-V!76;;h$UYV6DRUiJg7I4! zXYNY%8b_JmAX^f@F>V5DMR=!BKYz8-L zKQNI}L+6=>wti#+{axdS*UjuS*z@&%qBEICxV^0}dd3kX8RVT?<93*-w26yxJEnt& zH&M#C)H5>4XkMTXRC=w!`Vo?+UDcel= z6di7rS`IGYar}E2BCF^P8a{B_9`agi_*;IjzYBw@1^z5#2g5JDlvR(+T$LH2*^MJN zo2t6-bY?hjhxx7Wd1EMK!%uNRj`~&K4y0kk1IjlAWv|%$+y-o2&{kKeFVj04a=XjS zll<{Dv;7UHP3QbMT|YMiBaKX=$ozBEYm!K%1DwpPUg-L{5nIZTn*YgUeVOFidu}Qd zF~!flEVIzZZ#DR3E`hT-2&xZ+z}47H=#>Bxt*v?_7!jF4f(mU!mZyc>C# zc<2EtCC5*dW6cz0a@udx3n!?gT3-y5lhb~-K>EV0y~fG`2`x70f>&OKvjo|H?hCk< z=`;j&xvs7uueU>uX^I4m={#IdYK)%JN7=@-y~F+i@0_?#a;rI?@Wr~e09vsgQB@mx z4dhbmZRYB0pFgbsZ4Tie%gAUvwJnDw9-A|$28{o=l~dUlUslliiu|?r{FKPo#C_yP zb8q&V!iUCMeun|AV@mLLRlp8adQN|Ot}&)@Iy!9ypzkH_r4XO(mRsVmdCdcWm$y#m zRw6_iVZ{au+@zDFD1fHE!|Z%v8LpFomb2xvZeQ$O4ubuA~>;! z8n{kZ?Pa)z65WyNH5~lTr-yLJYQ9{N{stf@eUgQ@#j3iP>YxE98R2hKqnk=>bGkEO zcb#&&Poyg;*!Ovp!IX{X0{WT{sF#5SK~G}m$_i>Uxd|*V1>X6SMRDe7i!PhjmAqhJ znJ%PPw&aE8xx?exeQVkKOwgC{s2;f8m$ctk4`f%iW+9z2*H9PqRIVyN*U)}CQ@L(n zAc-*h2X>6Il>^Mpn5wUW7@1|FNLOb!Xt)_?_51Ey&g!i*tDk8-Z02dVuOZcGGuwSh zeoGlPutX_&Q|NT9)MvQNOnwV}4if$nM}uv+dy?Uzika>Ms%55Yz-A-`EMxlX?`FCX zL!Gl=EL+wy9s*ffatd07ekV^mCo(tu&E4d1+S9!IChXY2#nN^G3dsyYf07?O8yUSg zm`>gcfV?o`A#op173S%Fo@$R&+5<}a!QXiLEl+dJ*L!%@qUe{=+bY&KihWW7d6wSE`$4XMHCfYwVi{oB4^j)J{Kb ze6;OPrU3DA_~uLO`G(&`xaBnSL@G;Pjtyck0Ghs)90>~{EIoJ?heEH@_LR(#FgI}{ z8IQcuNJbOu$2^iRh$n00(h6k}3_#_jk0z^Kg7l21z%_vgu8F1ej2FRr5SqrlIm_(` zQ`8!O*27TpF{MUKY85TC-F{c0G>Uv2`o~lu`=nXnIVMe3xc;Gec+!hqOEPJwO0?05 zVlr7y+fLR~9`IxTq^GPhPGpsFB2dP?i7@%*9;Sf$X#SdS2MTjzN9dt1qoTdwxsev8dvVbNn&GIdnM zJdQz}+PG|{+i;zZWq5uurG(`66E^u=vz_MuLutx*a^7+taDyR{3}TUkr-*29Ry zKHQC&3NGpK&M3NMU|VqBq+Ku6c~D$!;}L({8kLA`rhk()=eIwVj4noeN3XvMf302G zc(E=Y5}vT-uyRNs<$c2a5D&YRrj|Z8End#=2|z0+&YD%&@w@xRJiq1nEuAmcg>9K3 z`7jgVx-RI9Ve{YRug}q_J?Xx0zCG*tw)iq$ zXiX`PD|u{xgO>`Yy#c03w#BEAv~^4sq{A+%>U=(yNJpwSweEU;%cDPmwOCrKavm-I zF#P|p_BHTP6<6QcWCM!^Z_w06jk?ygO-gDLjcp=P7ZO6$h_N8j7L~R%r4=oe4WLHY zaCeg(uNz|Vt54O^R{PM}R$6VKS~1}x0sIP3H4&odqjoP_G@ykLmAwD|nY+nu#6I?Y z-~4{rJ9qBPnKNh3oH;Xd=FF)F=Yz_nJwi!r>^2VZbIaQ#+z%cB8+=Ptd&_vl#QpdGKbNSBA?t_NyK^;q4gAEZBI%&Upp9`YQMM zd$;Yj`+66@+}9I#*R}TbM615{6sYEufqLYsPU=qaEH*O@P(K7bbpSr9vHd4reTM<= z=&O7#0q`XN%m6$HzU;Ez+pAqij*;GSM_GO4ewvTyG>ra3fpcJ!)@7d!8q~F7=_JCs zZy-uG_8NG?E4QFG{^!1)u1s>DtJ;X>jZtfy1DflT>E7`I1oYLZXcRRp{co{e21Mvhb+I@iPFio|=o_;@#o)<>$tWbo&`?6U_HA%nrCw{K--Dy^eQ0;|?M` zH1439`5>F4tY;a-#`2e;qt=#fQZ0m}HV{%^NDhrYH9%**1L=XU5^fN1kad)+e)3}fgQZ*XsB#UU@I0Vhp;6wJ-fauJQR4|wN1h9`c}hB?Rg|8wVcM6 zCiC5jCZk)x(fi+`fQx-9`_F=r{!?y*v1UeQC};oS%0I&M(SLaH#XQ}ATx1%j4+Wjn z)@&*qg~Wiksyv@u*W`(1FGsm$j>-lxN{X%jQi&?%S_3+HOx% zN3b&!SwkoXaDjzsgH32Cqy|H{_~0K18Eu2+yXgf-)Is$kBvBDk8Ey4Lu(jFsPTjab z#ZefZyd3y#*!P$@*3F3K$^W=u#UYqDzc6V5A0sAl&9+N?aOkxUdm& zp>WsRklrH2%3fGzsO{0qTy^6LXOs=9t@ZnnpcE3S#O_CP6(6!~Jk$#|SYCQA_u7(L zSGso9QnW6;mEwcv`P2mL+Ocz(0B*hLKD4j^+v^D##0p`kwZtHcxf8PJM0Pc-4zkK4 z)ATD|7k?QkM8KZq5vSZ4Dbu z9f4``d+K??Cp@%lL0Rl}c24FdY2c>7UA0AD4Bg7xij8IL}AU z^MUi^bR;eg0NjLhFC6B&S|t@wQh^j{ADy1AHgdH}99$S}i(Te>U^gHJRm~f%Om9?O zyWYX_-VD2`Tw)T*)e7w|CK@X>6TuA3!5wn+21lA@!n7`xNrSC1@d1HhCm@ zr5;T>)k#pDnn2jCjS1jSX{ew}4UDi_El@fJt7VL^8W{v!n6K*SK$?aS<()HEn3Bd*6BQ{t5MKT3iMRp6!zUUOphw3L;<8((p;!>Bn7jxNP zR;zk2MzHGN1AZgZ&dY!oO}cP!5cb9BJleAei&rRQUoBWA&T zdli2#Je>Z?GX)=kl zuS1mVrvQ^QL7RAe&cQ1KcnNs>Ye+X@AMWhuH^_c|4H&B$vaC`$t_Z$DWH+gPI7Np$ zhi_1C&kG*{MtSwe$G?X0%+*)$8q7`*AzBVS3`o|jq5HUS0kQ`6z(Dm7ZWcB5k*Q61 zO7n>jW;L6Ukf=H=oAG%FK;I(RK({95w}oJOKMMH-eo@#beky(!B=9RdCVpI$!BTnO zze7*xxeO#6jb8}nwZ!j}=U*pVRk=!5rmU(w=frCjrsLXfwR|=Z#@2cXo?XW{+WNrT zA4@lWKQpDw6G@Y7mibGkqa@BZ{rmRY|CN73pZ{O&ckeOUZyq)yKSTRn@$c~a|J8mi z$7sLJ*oqm!uLcY<*U_h-D`~4(jCSagw2f`U6Dj7aK0UHgiz*77F{vusx+%+8NyQMK zi_ilSu78GRal3A=cnqUvVXc?(ELaOtA+whstsqCY0{vD5ovr0JK$JrPFF-5BqCwiO zd6>PU&(Tm_tZN~V#SPH87=*kTM#~of0kCq>KT0hu3$SP6Jx{tn@4z^>?(CYWJZ)+` zvn_rm>=B-sIW_I9L2NFE(ZkX>YPP!?k2X^7WS4DP{&*?}|>(6OUKt+xpd z6QwjLV|hl)pO6RplyadG%J)HTcp(j`ZRV|Cj*kH_t1qYExL%IX8bT;on2W(9&AExACJPvWt9EpG!kVjQhnCgjGj?oE%- zayZX;rgCc9u7SujS9DrBaP;ByE!Q1++NlVd48}<2M2-?F0wqucE@m9sQzf-A(#)NR z8meZtF*ME*iAM}pa$TJiwy#WN*4jx55Zw3GC<+j!GIwL}q*^~n)X6+dzlQ9jS!<$b z8sgAUZ6R&sG!e8>ZnR1UwopwfmV)7M5yegsv?h@pL757J2Kw#Tyeq~lNRTVshLZDy z<8U>D@k}oYEahpfXDY8gde+vm9wYoThWfI>`h8f4%Ui$9X@@T}JNaH3!qpuat9p{# zfJ=Dx6i|wUM16*ahYt1_^o_*OAP1;fjKr=}6LV++#Q1x|uLrX~=L z=wT-K5)%Bc^RFa%vD}dtKOZG8$Vf@@;=xas7wqJtWQ9Y0M^^AnWW_xi>2gO*l!LkR z)qAL~92=y}p`Hq6cP4^7EXZC!5#a?8uXG$MuNnR7tY_n2aQd5-(|p$UvR98O9kwig z!;uc&1dxd+ZNxQ?mXvtbQWyxvUwJ$O=)1}1%&++HsBbSPN$zov(#6n)Q;p-F&USO7I+(~0z ziUK4r1y;1R$QQA|xh3G_Cy51LdL)B6EqC*-Sfs)QL58a5Lnw%t)k0wvJM+gS zd(0yc3o{Zu`;%h9cMP%M&_7u^cu7;w@aUS6!EgfhA33MqP zeAarA4w7r4%-OYc;FUK%SyzH|;O@GUAzwvC#wY-w{PK+mpp%>;S`tMhq(i>sPmFA% zxHYkXorglp0n`hIgJ?J_4yj;O-uKa2F$#rF3We?UaU}9;p@3635DIw-q2Nn*#Uk)M zj5e6!icXO>K(pnE5z!}v!g-L2qlLoXvCc`M@O`JxJNL;a1cwNPwMb)EIteDF0uiCG zk_o0D!N~rOo*$F-;0+i{Eos&t{m5yAUj?0LYjhU+DJVp~FZtQw+dby(X`C3JF==YH zbuE;Ky_%kM2;))Wna(|QHP#xX@$MA~+%d6*y&ubCh4%YQ&hsp$oe}*}Mn^0=l5SOe z)DiPwr5nV7+2BW!Dd~YpYM*%|efi%tASHkbwkolBQ_w#vCy`?Uv#pkqf^;$Q)z(8I z>U$FDW$aRaBrc}o&WLjLXsXy0*?Z#;K%q=96%wXO>M_Tl=Os)%1Rf{2p;U0vB4;qc z26nGa>LoEKB)vziU-lv+*DtSd)-UP8I;r{ds5-w?M@v>5+%&>>kb-(C^S=?KViU>& z2%|+5BHGGchgVGfIKMK&HxjQZ?ikC8r4gcKaLTHsj&hbFjnMz#`|xt4UWIVhGTla~ z2On8mSW5fnd*fgR z-U6RDS}w%1agY|}Mu=f)3tW+bx>AEc2!7b#KnPRaC(&F(vO-B($W968uBh`EmJp_S zP0F&Xj^avf6baI>=xT&dMIvq;!TIJ;#~Zlm4EF(CP8L&DSw;v)xrHNuiQW zzeC$%4wi-YEWZDj!wf-?L=I(=Rt2dIDxBfQ@fv#!Qk#R7fvL+bY~0s~{3dO3h_A4$ zeLO?>A5vp%B8F}|T;Hi!k(C7I;AA6AHy*OSYrld}@ zZ33oB72nck2>SAv2$Ip+fBhA(KAi=DMs1BY-(bzz_05_saEGAm=dZmKryIz4<57;R zHv9%DL5S~nRpt2Sy*q!cD_$byq5j#MKn#pJvLx^p!es8NQr0-?;O$PTY|7<@z#vBq zl5rKWQ(|!HyYtcC>B~Lvs$T7X@=3s2{}&C=Q;59`14Pl~jDkM~@Bx}@IhejXUO})C z4*R95oZ4&Nov-P=3^Yy@*nWjnF>nT|7kCy`y8}u0&Sll?S!@fv-h)W*oOiWDd-gZh zzXb0bnD~ASdUu%#`y5UAV1n}1sP`UN_Mx6XNKpM3_(+sE*crcI zM27xSO|e4c2wVfS!aoENnDcsJhAx2AqCW-ad;fP5?IEt%K;ZL{ zfV<+ly;=cIx0fGrqx9Q^zY^7R&JgBs^<#VAHR)*te37>s|9by;&-nS+KizZALi}=f zch+}ZX~BO41Aj-_-o0|re$@H|*Og%3h!MUrdo=D~CvK9A! z;Cka3_w@?PiJZI@xA(sLy1i(3Z>)El^keR{F6!=W?;YG7yS2Qp7kkNP^o(B$EI3O( zL+>T$VJ9*VCJecFo`FJhhoRU13ic1;w`UWK8G!fn?_m|-$z*#DJ)Rc=PmON_@ZAsJ zRm<{R`-^vT{_H-3==~i6p*Qb(b5nX*ynbH-D)yWIS-75r!;WfEUuF=P>HXoGPex5W ziTWbFWAD+I89|yl)D9JWvoEuCILG1ua4!XxWY8^O&{!+5U+F>*zTrmjD}lr;;+^F+282PT!Re7?c5S4 z%Mgd&y@Eyk_hKgi16^oxf&Ux$@o7QWBzgd?t~K^7Sml!->~9hS^!M1K_%4c+#<>%N{GP=j`?Q|>d+kg#0ItA8WW zl#YBte<%eF{1Ew-y=ind?)Mb8_hqgnxu5OJTrbbpU{lo2&~}ElGW1+uX16>U)8nM- zeQwYAy$JU{yJvh1&(}8fZrd}ypP`My>Yq)x=h z?^R<3HyHbR;~uB|dI<+Jl|`qdfFl1zV5hRV^xNS5;`T&X_a) zngSJqU1%C~E@+XT$jkOhwg66?OmjAeqzuv(SuUAHw8)nc4VK$8NT0KbAtIo9_&KH}(f2 z$S%I%PoL!eT;%B)&yN0|cX5^~{p)g+km!FS0OQX%?IGi>AkU63c0s#s%x?TfGw&zn z6pB8D*yVd{ktut|dx6)nBn$deg8ATy8CEDw0qwYKS5B`^z73)M++mY`1R3R zsjT~U@N8cX-)Zk71Ffr@k{i}0_%G7(lxgIf-40uH5)c0#@%z`8K20~vXaJcxx)f8SwNy1eQsaxHk%jh2rp&JuavPF=Y{Z<#q4>bciaDUA;5%a z+D9ReJ~^&4fH#mSwciSO#YDQFjFj^~PuETu-O952a!CCmXhJ3EQmR z%p$Z9?HoxN*x|j_@!B>L2wOr!PwxAw=s?vQ%`W%2n6}{as%ak?A@*rw-9&4;8>eQL z)zvkAd?0W6L*Z@U)90~f#&}G^&wU++{ypd9qX;094-yx`LJ)5xap4nLAaec)iNBac z;x9Tvg`;hL$J-~^l^`(AnO%g3@ytun-<|M2CKDg0^HTxh$iLW2bvEyxkp0nXinq;r z^4CBVg4zQLc^i+ez673dPP9cKZ&f=AIxy{7_9fL3bx%--cMQN9ZVUOT;B|8-ZTahg z>#_I0)k(Iz7u=@5zO3Mpj^={EKZ%kwmm?*6+*`yb?o`y-jn<)ZAXJ2cPjeO8C-uobx)0m>AaChjQY5)B;DNN)=is(>)wtAE~bByj&p`Ust!A= zuJMhJjk?B;^pZMtJSybDVgz?GVh@2qpnj;Op#J(_;*`o?51tAa<9{?amq;t<{V#e^ zmH|@rcf?LOX9(g?K}Gu0AiB%Dy%@6$GmOf?G!CrL_znvt)$qps0uQ?^)6+OD+|FLG z^oOh}{_}e~dd63Sm-wu~^EDd^DBojy4)i|TGrkt#o^5E3@iX~#8`2%<-Tqp9&%W0N zaV5xU7*uA!2DJCv9zl6iD|E&g9>n#YrX%_?OOdfJ(~sZy^CSC>)E{Q*TA_Vz&RTYE zw9xPBL$l<-(3AABsy-stI0Qb#jURJU23O*qJB+2Qc>Qk3TcMC_&(Uv4KEQdQjzFCQ zI9%(#%u9Y2NMm4+X?A51Fd+UG5X}#V>fbW;@dHO3B-!6{N27$3P?E2=!p**H9s#v8 zXjzYl-U?6P0@7?Y=>sLBXZ#$}r$dyCvlH~{Imj=h;cE!R&jf!`nqs6Hqn~}5)!_HO z%v$_vnTHayS=`@ITtakQ+HG$3cKqXnaf9Dh-E`wEnxwv8L-RWqOKBq`KDR-DdLh8s zD9@VeX5~@yavw-QzKG?5+du%C$nG_r1*e365j`KoY8$GLJ7hZsgmtPQC=#p|6joEX z#CkKJ<*I)4OzbZ7C!`^2kn320Z|A4iHVWJP$86T~9N6nwveNd~-spMrwSx|uaXOgH zWqe0PN6m*mGkAO)%wHXT^Emw0)0a6H zpEci6Q{YVnq8VzdaII#f8mVKHQ5&D4ku?m#FTx|usCso+AMWXWw|FNCzA${KzS=1~ zVPoz*yf^+z1ib>#&uJsLuBQ~w*9xL7r7cJcrD3{ zJu%9~S4p?=N{0K9AvGCf`>?gUci7t9nY1M%1mF;dx%NpM26gw+^5Flff9du=X8#g- zML8w%CE9!^L_gMy7Uy+gSeS_gK|B+S=JT**6ua#zea?r=Wc;?8%a;%kzaIElmcVv1 z-tF_^5&P=bWks-4Ip=)nFANMx(EQHqc%;R?j&xYf9O8w*FdR`;uzy*N0=mYa`dkrd z$BG7ybE1K|CB!o~-WiO`Lo#m#Lq3G|Rx;#9Xzf)Dc@YXuVTdPa{PMMs=>$p%LhZ<_ zs&bPL5@lmON>yp|QGJLgdoosPHhakl#QkB=fw(W?^3W6E+kv$$AthG4YOLA@T(EKi zi+$w+XlL@lYP}x>O~gMl98WRuC%koyGC|4xwtea*ZGlpTwqUJ-=#OZ?JMf6LT$unI zZ`Ev=m~T@9&$Ym{;2O_D zAv~%^a-*|d%O*tOYW-tGeXQ*0?DR;rE4*{rwPK15JDi>6Dgp3;*P&DO^-PiEs;g(Co=fAIt!UY= z!miOuE89{3K3=}ydNF#LtKV;Ko-CYJ z7TMyS*5vfBT4|Bv>i2g|oeeCwNwp9=bW5$Pms<4;E!p0KMKzREa44)$ruvO_Js63K ztZS?B$cMjoJmB`7_U$#+wE?5$=TfnGfKp^loeSovBw%xp6B0jsV}YYEVJO62Da}=& zsv2#Vbi6@rliS1P;}8?Q(lZI!jXP(cb>O|V)P*nk6A`tGu70?OSXg&H7G+Mu z6{>ZOLoSz^JXc*c&j_6a1Q3Dq=%KG8KdMw{tb4`sH$-!~%X(0k5~KNBP*0<+1HXW6 z<*P6(>wKem3PT5trVH_e&jq*9Ry7v8lx5H}A{AqC?Vo!QEsS9#>>nGc7-Meo zV8N(*@z)Snw1Jx!U{km~G_LHd!`8a$*!2$RR;2o)i)kZB%e6vlRztLMBOQEK1Ir=Y z&pI6(EI`*S#3T!*MvtI$xb0bLtfbLVwBZ8ztOn!9>HdbsHrUv-RNcq+Te6=k#ZMq{ z0kVO#;2WM#%0dk5k8+Ew+Ii}*<)7OzL~9#A>`1XJc5}AT+zGTNfslszH-y0Xw3I{J zZw6YFQ|;{gkO8lMLGM85uOi_fKvo}*i!?ABp}MdT<(BGg#yU0CkA(T^+JKtMRn&4d zl?GNd3Kt20fNJVOJgU{yrFbj__AQrTyM*DNfil@>rKF=4o6j1B!SEs0oBvEnImfXt z1qvnhBY=ad`DtG3r~UZ?-%?j(>X7{pjCh)U0-b|rM~bn+Z{islogW=FQ& zLR4tBFpYPOdtxw#Apt<0wCMfW9xyO`m7~hBRXCuc2CU@`ATCIY{6&pj{f1`u24A(& zM9ItIK9$kUBOap#G}L?^z2&ev0x;!dcrg1BqJf#&kjrd8Z0^Lpsz<=+)8?vcz~~j= zZbX2EnkfW9yh7ABas^I(Z4@qgm7Q<`TCb!^cYoC|VlA2?A zpCz%jFJ+UZ6#D_#mc>e}%r)a-R#KSNo{scD$P>^=CI+|%Il%n^*3tIW7@U}(J~hD_ zCb*LcEeaDpJz zszpA=i-!*uFD=PW!>#!hBuSocIsV@L;5iOoz2xhP25w7iU{Hp^U};+Y*@yftSKxH3 z0y~Xx*n@BD$$waIm=gcIv%a{VRs)Rbs+iyX18hW*kMQod#57^}hWTnlr*&1x$n-Pg z;f)!*2%=&x%2hMwbydtH;7sX{6#=DH$mG5n`=Ag5bVWn7c0kQo2v1tk%I*PGu@v^+ z&e-V8QdPp)jU40A`|<3Oax}J z+0x?hWqKG=IH1|!%R}aVvcZ8Ab)eOS1O+dFF9QWTI6pMnW{-)?nc(oufv&1yT>#r& z%a&?208)ucKna{OI7)!mx{gXfrF9*Z0KaveRsybDsCupIpb2~kiD}J(ueZ67VqVY; zYeyJfaRCY7&^b~e1+LMw7O^-8Bs@NP(Ajv*L1$v79&~s(U?Fgvi2>yq7NntF|ucY%@Uf!?JCjCIgisO@?u;?r4O zy9PjrN@ON6{HR6YL?}CTpvrm1x*;ew<-AAxJV^YhbJf+5_-j!nH5<@%YJ(B_HUecm z(VPLJxfqp?Mns|MHJZ-Gn^tH}Vd#L-#7hT^b!v`7LDzpAB|=C;iP?-0yy*wj%ffPqQ{6^e z?HH)EkqIIU52%AER@8t?k=UxAYu!E%;)s^OUXTN)zM!_0F#vl#M3mp0wd53JDJ=u> z78&YY+yR5Ou-8GX<9x@<_K(oO$c%na={rxW0AqlAJFT_@@t-1ViP`~*Lrw6z%#GRb zFivy25@-VeUt(WHWkJSz_Vr|`!b#W9^C4KKHdt5B%N)RH517@^b*badgt;6Dxa4@) zfq6Yf6U7J%GupWR=f?u{QqQh8kB81`4q@Pb0uQW>3g7!UHZ zH+l4Tc%coD_2|E{A5f4gAoT>kGU7+zdc6S#-+1@R$e*)S(r6OccalIU17`9#P4?Gc z6YTH7ie!?eMfy=W(e&#A{m`~0$Lygth0q{qyhJwNvMb6japvMXZLuYi1b89~bTXx2*z>El3= znVvBi6Y&^}2gVFnhdGGd@1MB4z)&#u*qJFVtMqW1jTn-OUt*5{ydV&7M2V{z^<6}v zF!8e$nA+uUV8Sl{d_FMH#cqBKXv>lSl!ovmXXt#JiAFU*=_P1@Q=J5-g8i7_@szPO z{2Mv-y9UtSptl!nDLocyM@Asa9t07wb{9WVW@A_>1uFd6dFdx6@QtoJD5kqcY zw6Ro2c`$|I{ij-Nb$YDoCr3EWc>x z6Gev0Y8o&52GmCD?`S%Y7em$PHl7LdVL5p=YQH^sy<`sbosn~;xNzqcY7uLt=9n7q z`%5@loE5#ri9&fRUowSho)me(SHSH9|GkE!B8Gm8hJbGG10rjB>ATt~|e2Fk)amwxNXg0mfO z69pU5s8hGck9YbrzLpnkjkYoYzEp42xyugLziq6$!A*Hmf^y3-AO;-$8|%VgY@a<3 zjnE3bXn{Uf?`K<1i-y9QB#JacGlWP-8s72u7^ z$;~?3w?7FVu7N zl^vi-$*#TB8>pFanAMnvtH?3vzZj^wm6HqY4UND=53y|#L~JaxY|RZdz4L&07%maRH~N8v8|z{pbrk;$&;WZIJF z*)&j<{RmXK2K38qn2eAwa{{^x^f2s5EvNLr6@IfxRwU@y>)~aJeiT?VNjj6!@&kSY zL#Re}E+rghPv>Y0U3FrkEI1Ayx7i5WPXNMdi^LO)E0~lkY|`6fUJMIJQ8?09@iAZZ zx_a1}jnE}U9b|jX9#FmD%|v^C$o6bGljwjts5r=+=T!c~$aSu0m991=2YYOHYLC4E z;x+cGGW6K?1uCBTl&*M|kUD5||9Xc^xrk4*mjTh} zt^Mpq$$cn#OM2ug%78ps190e`ptq_q$-9%;m~ zm;I3`$EPBo=fBvJiQiM#%KZoQbYCVbsQrap4%tY+&UE=_#P|D1o=_CZfEN@6XU~Vn zs;wEGRDGcn~n>{+j8MY2_R4Q7= zuUQCXFJ&kjp>~1CGs$VUFpgV6I>fCY9V$Vn2+^ zdF(hmMk5^vxCz@ej{RW`IC(zrmN5VkoH7qQI?uHo`#+e5ly!GP5vczc;^sPMz2xwo z6|6*RnP8RjFaca)7~%aO0N9xmpCVa1?=LuTxCdNWF1q##ppG7eA!r&p(=~7;u*40? zU*gAUdG$>1z=erSC zv>psORM3x+fUC&mIP^rjl~ROD5I4`&i3RJHr9=>kF##zA3fb6!p|6iefmm?RkFykj zAvJA4X_RgAOX1F8hxz6u9Y@BfXCpPfiO~`{M}XT|I{s%2s+Ap|KojT^@Ik;AITMPi z+6u+D1V>2CMF1DAcA0xKU{_w>qxwB#$OYsEdxbT?dgk$T^wV}9nJHl_OGr8f}*c;gPtRz2^+uTVYN1QC&4p8Ri zn#7_vTHaYfbPkSchZEBG<1I42qHVi^(q)!|?StGO?Us;q8H6OU@GkjRzm3={jP`Fg z`u&<&suMCH8;(QgLk`rHZC6{3s*TtxD(G-Mv;a|RS6#uTI@Q9@flKPb+v+d3?wyAh zW8H_a$UTCEKfILfTJ&XCOD#eZ9-4{Yf~}{#ip@EMlqBwKnvF1eq4F3T?NX z`>~Ia{+yKbag0X)KK;ol>7V*v(`Tlnw^Gw5_FJiWaOr`D8o%JmEZ8oOtFtD;*0iEE z?)sT)JoWW!a5m>&5N?gv2=n;$8ov>?_zW813?x0Y8ApE3Vx9^Zq8Xub2B{qZFl3G& z-Lcx#woF5Nxqn@O)zkpR{og@81)tmCRV;mE#cpnbK7)ci0n4gbiU}(deK0D~6;2}D zyFmBwD200io)dr}lLIjh8>jlvg7lLbe2N>SX@SYb`yKsQ#l&M!yLI;_(fmW3s1-7A z0WuLE;6j{YZ-&ujW2Gh`EZK^Z+<<%>USeJc39k{Nd#wZ#P;QfvC?XPD03`U7OqBxV z#rv_oG*bTWk=_bzTH|CJUH*5S@|iic{MGnENR{)XriSjoi66Lq! zam@OMbp4q*wS2Ere$WVgj72k}%?vs)YEh=srmZ&gkEQ|b*2aH!=mOUCA*Eu zgm=Q5k;>tfO-SbX9(YNTv!l6v+wh3hd=-k!93*twGr`Z~<2m4IY&S<+(m)mS$cfs7 z!DxN}#SZzR{V27yGiU-=mvvku5<3r!VH^xV6Tyk$0XO~|=lw$K zM{c!rp_(6vuVVku?@QJEhPcW16YEqf>1N*yeuw|EBO9?hj95whGd;gMI> z6W!!o2VVS-8Y7-(0Ywt1d=QS1DCu@ejMYkF&=iB*Vg=Xo z4PT$&8>})g&0SZ6Un4Yy#nc>hTR8{Sv*UK5vhAdy0R8_ z19XW)=S1E`w^(!f-Bwn=>KV5c5&8H~s8-78_6r#bLlk|GyZPt@g&DAkISJVT!e=xe zVMVZBj_+8>Ll@!^@)eXJaA&|L8xJ}mK+y<{|zO(@*%LUBpLZT2}3Za@AqWT7;x zrJHr#mg1cS9jEMaNv%Y;ns6V%6hCp6p#dw6!1vs-0qJZUgp>p=sR_!N;M+{F1_?Aj%Hi$&I&(d%pBC_0 zCMjUFrA5+(Jf^(6>dZ%(z-7wWL-2Zxw>w~y`(0eyAX(87^6EQ?)=R0S-o{ej<}M9V z#D6hry>XU$Sy0G$@U$wjM%2wYF)T1`CIk&HN#A_H z$zv5I>!%ZuK~oAUD(uzO^H9NcoeJwH$LM$iV>O8spVnGe)^AMf#0?CpOOsl91pEw8 zegL7^ZZ1RN#mVAY#rAN$R4`Cia1=h_2_|qEcJ=E20$SXJ6$muKB~D^SKg1?D0lkOS zb2M;ig71Eb8?^$!UJM%Q_IFU%#_<>*nL9Hzci|V&fIj55FF>|Y?RT}=?v^ViSsZGb z29d6={y<&PA1i3!IzzzCE7Pp09x8#>RBloxZk1e$s!I9WHjVf{J2t%79ymN50rmk( ziCsF99f&*o^~1#X2G=(dpZY6;PjTljE#L(kodKdLXgdHk5w00-qMPzFqLpc5$~Fcn zS@#-LmR0d`Y#hU4{wt~{6k;(dGj4=GOY-mOuGb@>3(o?2PQDv;zLoM3a-V41&ad3;r^5qcW{VHjXdU&tXa zaH%zGrd3s2whOJ3OI9?@|6+<+4OZ1s_0qU4fo#{-39n)oJ#WeBhIt4r4M~_wK9z|f z63uGR`cLy3(7JeAmsl6F0iusl)OR&i3wtm`AQnkWkS=gdr@4gXam^ew&&V~#l<+pRzL`$NJgxMybrE0t!1c`ldLdg~a~dgyHQ zLhgSqp4?TnkmTyB3h2jD{g7Qhd-1S*x0+?3h4V=F+2O-`v(f?zcTL4t^}sKQkUdm%vdB;OG&MtBIh z9Lm&>iJ0_Xf-){fM?K9c<56THsuu&Zj}dwZUx!<%1o5m+&6l)X z^QTm2Lj={CFkBsnEb|96Sq30uk{E!x`!HNFa;Y7IrU1g;*xO@d)bgUiiD769S`q4V zZs%k-E}rsqPX2haKvGu?sEv`yL%2-d17?a`b(BM4Pi%`*WEe#f$f*Twj{SX;~%WedSi9lX+x!M>^sC0j`%#7mb>q39?^9b1=f?HLf2Y+#rLU5#m0N z46gS1{GRBwKD-doey8A6e)wY(3U)b3XyJyW2_@nupiS)bGa-PUKzBjovE}+>RvffA z*~zltm{4aE>Z2f+lL`J4OZ9wxWud2jQAF zdXEa;wg9(!%5204jRo$INcpO(v(o2dHM~enc~z(e#>K!d-snQO$AML18oG@yEpW2g zKEax~3A4gY#e>B*oREhMe1t#kDVFTMTe2IEZ?SP34T>L(T!5DwKiS-PqE)lYZI$dQ zK2rSdxC7e9Hg*<_wr=<_&TV)tArm)bh)nFn1ut0nq7=k(v6qsN+i(eKsAVM^*B7bs z0C$;DSfMy8Y~3B_@&hHZdFz}o3Vt8kOmu*q$2;&{*&I-jZ0N4=5I@eIc4-Y}n~ zZgzUlUM`p>@QQsagx3E9`ZpFzydsQacnJ<-A(U73I&%I!1bL$wd-njaO7!jru-B)1 zH)Ay%hiBT4+1KJGin|yk5Top4O1-U2a+;H5?J<#lgh>W)c9c*O1*LY<6-@FHk_=0m ztxozxFKAEc)ZajQxcYvCIh@`YdK~nVi(VlDr@%vyBh-IzPz&HCNXsUfJv{U_ksTa$yZ%Yk&d1L-RQ$!x@@P<#FHMjJ+t$bD=+D4E!t zsVf5~YZG}V=l?*L*C_(qR~R&i5`^#% z5HI-t9IwH_2}X$5kAf$>By)+=5~(8Tv=t!pO@JP12Lp+l(Rx&pQqGm2eCS?$w@-i& z5(L#oUN*PS9ldNQc*GT16+&qdIr6-CTyPNA?Dl|@aXUC~jBDD3a5=_(cvPZ49{X>? zOcKX! z?e@h;0&3AsGtTr>E$D2bM$(S!nnU%FjODJ*Cbl6CywveEy|W1$);y(i0bY%^CQ_`k z343g5_>_mogw7`H8mCPFEskpDT4ZV2rbnCA?>A*&P66Iq_>KY&J`gYVkR(2THq|R{UiwKtm5s^I(!Iuiub|( z4`IsWIY`-w# zSPN}mLm!EU#lc|#jO||cuvl}%EfiliMK;lfL{9pwEVpK(w(igd+?xEovJt3?^E zm&>-+_eW=)qV*?V?2(UwFscFl3F}~YQut;&O7iAt)k$zC7@0Z-fymUcWN~j~D!ksH zi@E*qxj7CH&4KLt_o7oz!HC3}_GnD7>JTmfB9fU378+9h-iiTlh;dFYA^*K1|Gkj^ zixvS!uGyYrE!gC-YBpurH%PY#ozJAq@8pVaC6!2mx18R)Iz{+jyA0g87D9+g5~4OW z$%RZ3MG|3HXMo?#27I)gWR(H_n$ZLNM{G}ClbEkw5bn|Ge$JYZRie{*JS`WK{#l>r z;9T5+SD%%&tJqfCQ32n$9Y%;JPC)fsoJX8)SyJXImRa0UypP`(>O!C&prAqy^toUf z8R)w-&u|kTR}vX*JM=&gYS52qA*!pF0qKApRZn6J8Kyr2-`om`A$+sbX!DR~wv%~; zZ!SAUWl`_uVs>uqhtP7_BqRI-jW|tthWTeof`6tA^N+bT+hL&^uux4Z3vrEhgoQvK zsM%V9AhCD}=xhBBE2-Z<&T-kJ86%a4V20Zt#nD};50y|KzD)sJMO8bO13EN`3^Ef$ zwUayEPU?|S+?ZhF>7JXyOA{KvDDzM<2rNZBO`>91M~ zmOhkFH1?)odJ4-};GofZOrd}1RwTI;NoemP1^|WD{hZRH% zdf=wuQzqX7XK2eK(!l>^P4riwwJ_T^aA2rY#z9x744!z%INoUzmMgIj$Glt{!80*c z@B&oqAUt78Y4tyKE)P8}Fb0#~G4(4P2wVz#N`@LyOwfxS<tVHmN(zeSwU zCZo7IQo5s45~mrVHxbY8zr@q2kKR*9Ucx~K(UZF5ioq~t#MtV`*mD{#sD2KD#0F(C zdug{}PQYLfhRt%a%+&XX&;Lp)rSbvBriC)}2Zv%$f&&pI9G6YoN(aIE$`OLEotO&d z4NTdFRi*o=YtW2W*`=a|XeXbo_6)|wjJ6ogu(S<0h~fAQ^g*fZ{e`JeEkKR0VUBio zJ?3H{XB3h0laWaw(q#bP5Xt6gKWC%ZS#RZDpc~RB2YosldqBC-yJWX`@I=RHe>3Oc zSTuV8L<4<-8#E(k#=gO22V4VoFKJ$1%8jhdRkf6>m!FK!FxK76$=m2c8ap|=GTLSx7F1MG3JQ&#R3`9s@3FtO z>#y5B`4wA>+?UJ&&9iYUx?nf7cX+*9Ha~KM>s!e%_2Sim%Z5pvDF(vD9>H8RDy~Y| zHQ)OenM<;mn{(mb5gWTn?J>$;{f7W;RaB~`)#(gWtELAeP@|e2X29%0(TVw1AwXN^ zo}`#lC1!6@j7MVLN{Tu30drBCNWghZV*Z&Fvr}UFlVaK>20z2O{wOgVQ4(+-keH8> zV(yR_TG}SkER`5{QcN9Uf=_9hUTc|oplBlT<&wB4DW*(f0y!gTzJwUAJDiDUmmH`- z`P56j*lhatb#^m$;u8F)?=`;w9V31(_*)Vr`G=TQyc0bn2R*~$HweBsuPK(9u{Y5_I-3*{J3wXqlG1i@s1mGT-cA;G>h|-Bb$>wo7*l+xt z$z?02Z6JD02E<@qwERTp7~IO6k=eB~)ZS@IjXF)%;MGoZF&=4=RZH-Qm`m{+m}|7% za3eH|w!0^CKPIy37R2(6N=jtat$15pZnWJwk(x$13_I_hcn-fZk_v z{-M!!oY|g%-IYj$*^IW!(jyUOMJO{8VR5)6q}SYXT=YJoX*TQXZ3lOYJ)|&S@qXNn zE>aom`{im!-P2>z>N;$X!-&!K%-R`bmHIk^x}HH+%N>cZx{+2^fbdM=Sr-(*^?q($Djwqs=&%Rsr@F_SagrDT1BAk44h_tIeM$x-0zP6vNiGPEwlo9 z?c2rs<98A42pLM1!A4I%A^p z(!+G+dz|XYDz}C&{YyG;=L+G2#*IR(DXw0d&h--|iBN?Ba}kO`X|yjIp}*A%Nk^-j zFf|^0{tG^*;4g9;-{q3C{q{YhzyH(8zXKnTpLTR9`9)qM|DW{tt4Dtq36Jl0>F*be z{w~rT-+!XNe-008MGbm)*@|lXp3;tmN+rUrtj8^SPud_%w4dlJ}igA zOPw|A6UU|SgY1=m4ZN6?-mY=dK9|ZnUh>XyNDJo`PXDxj0Gd-s_opVUVba&fGAVYQ zlSP$1#{piCBpmm}CSll~{j?t+B|O$2Lo9^>cgUdx`~c;uL7Sd?lE(i}*^iGsfW;9E zfzD?92gGnIKoat|0GR+g_B$ecThjRTY4B=30Z%X_oZpVX!FY7+{e0R7j7tI0Pn1|m zC`t(ffgg`RO87s}_K7@1J{Qx#dHQ@>9fszd;QAHF&FnB{?PcFbD7ZdCm`11t4`ba? z+@`lTGebV)JB8&LAzlYgh==^+u{!t^G6;M*6iZ!MLz1C5P*7L4_6`CI)nS8Hf02P3 zeFvPxh|ZuS1p{RRv0MoLxmai}hg4%#!6?{_mE&|h;uXwks z+gNvp4329`k;GbC&V=1okoH*CPZKuT#j)apT>FZ!>NY%2oNfjG$&^4_{CB##t%v|< zB>?Clyc;9iG7FhVHt8+12;oj`(5>zzWF?m0O7`ppIqU8*mCPO*y33Go=iU-9SjcLL1B>xNyhSQLMN4Or0{v@Gm;sXsaUn8mcRVawDE2=W45Z8 z11Gha_=+!T#$4-~d8%SQJWnt+%t*hBc_n85yY$vObcO%YZ8NvCVnIe{#f_MVF2!9F zcelgT!xgEx$*P#gwc4*cE4;-!aqaBk130SFWrX{H1mZ)e9ZWwf=HgSd(lvDW0GbO1 zIOI{58vE62TDE*y#5vWK;{DbtQm@k_Z(+L3YPpn<+A=Aol#tr7!l4Ba8?#{Glzqx% z8{vf7Drx3@876h1lUB`>Or*J5#RjlTIcs9^Ct>NrKE-*%qPq5MWrQ9>jym&by7mxv z8Q$2(9aELXUxgI{w`+v>_*u2WHV3OI`5*akvmihTom7mjRV{Kw+oB}0KP zVuk(^6^otG%QmXtXNN&3;Xii7OUiM6?jPVLC)GfYq_-wkZKL<=K_N1x&u zrB0K|Zkob5>Yv7dG746Ma6X5~_9%}pF;n*j994Rp$(4A!!?OR4kj~si$s}YPlEJ4z zFaeYF=ouVbsZn?4UzZs}X!Q!h`zJ!}YZ&TBs0fg|%nuL>N@xI~wMZAc)`3rZqr}<) z2bl21*nr^r*w^q3KJ^jOqYmFhxnRq=c;JoRFwo$ocpIJ~$prKP5IBix){tp@IQb7j zfiDW7q-CNIw`D;ojyHvC3&wlEJC&RiX8RSx5=T>j!tlN;Y5LP}IH-7>5Eb2FSk>qIQ zUsx365Uc6hr*a~gw`DBA*8}zYlBF72DU2#~nWad`zfO}(;?ganwi}PVY;H_99_vBk$GxhHn1bRXQT#Fb1AeW z1le7@^Y8(6`8?yX4v27j5;Ae*zZB4tcD{S0y7;tO> zR07eDF>aEu?2Q7uWX_bHgh&6)7{py1#5*f)g7gZpJrhf-=c716IvzMDvCkfA+dsja!u|vD zm*e`pIEYX5gHvyGp^N1@C_Vp@me1dp{qd-Weha8C`z|OFL zD-(Q|2`1=fmsTu6ETNG4BL>iq!lvDx#YTFpVs4jAI7pB#vy!6*{`9~BwT65`xge6j zKEQrDia*w;K)#BQKSC8Wr#t?rv0la1DxT1ti~RGg-*S!{JfM zArXeumJjeH8kW(v62!ZQe9XRo8R^v)rgXES96xAl``FWI3_S+9MrVs&>uE3Eaqb-< zN>jMy;pSiPZbflJ}e2)Ams zUB+9?)uu=_I9yWTH0^2XK*6)6b9|>QfyFvrjkaFcTNJ#iKFqj>I9>Q4FWscMn+rC#nFZ7k!+L<{>-^BQcKqtd6UA#d=dPPO2y?y zCruI{Ht8N2x`aZ3>#Z=USwK<;eDhs6R*Pf9D{1zS(r=yh&0$JX0+CA{DHMyP@6=s~ zCyRAaHg99?3bP^j7r$qu;r@ho@b`TB?g%lAVxtd=d;${aY~}GBD@w#r%kqL3c#`=> zh%;*#00#IhwgM|0b{u*Z6C8AS`w%%WaRejw;`Pa= zb(wDNF#wej(6>=|GN3n705t(n{4dlu!Mfbe^kSiv$#akl&rx&uYml6=;7sTqNptvL zqo~yVl+Ofj?5Dw-@d9g;W?W*72p_4yF_SYpq5NV}z`l!KMrQjDpw`}fGe11q`f5UaHNBYq)J9kTzjVdCHfsE zJWBhsRR7mF14eP7Q{dm(?ZcE^Z%aD9b*vb5Z7c^gM_n=e&1u zd+-+5M7ga#&(*$Z*q;Nu7XWp4+SgIV1-=EU+!w=|Km4c;De%ornIdB5f_GxyxYU)F z$rT>HT=c527L3w4F+vRMzn&ycu-4^B!LcZ6GFpksRfBUmCjpG=55DzLc)zOf2$EP0 zXb110LTL4^2=TAWd~P_j86noD%lw-YQbJz16$T$8-$Kp}f2P9$+`~X0eRp>t^6qv| zhY?<`zldwkMNSUuZeI|^fP#hAoxTu*k1i#qW&?f!AwZ8KK^D3kX8>%ATC z;#$Fwz<@Vta{(iZoJfIYE<_Z2%P;HDH4lLngPe|1uJV zw;}F#c7;rqaH>p9=VH>#p&T~64BTbZrS_hGjoL#s$JEX*)9h9gf@%0URO z?h_{{R*}NSx>Za=^ZZJbQrGwt5xU|EBh-Pfq}wU2TBO~D_u@lXwNQ(`s9x);;6@sJ zfI*J&;pGFq!F(8XRlh!Ig8oR?ILs@{!psXJ|Dne3WeqKd3fX`#%Lp*;@+^Q$v*#nsbaQnaC+c$3G35i}s~L~{ z(2?zOgx9+wj<+mTk!9mvfgz#w(-Wme(hSAzY?nvbE@%Q=PK4%Ji(meAnNK(&Bm6u< z&yX;6>M4@d{s!P{+Ov(=NTb?-yiRY);jJha4MytMU3BTCAe)5P5-&(-YON8Th9<)K zK6+OmTO&PDiq^giCrY@QbPG#12fl2C*+H$#vkrAQDW7D~bxPV=z0mjqc~vdS>N0B( z;9r+HXE;Cn(c&)wz1{k!2%Fo%WpQq4aj=9gRE?X&p;fEBT;f!h3J;5A~*Q9 z2WBzh3-AecFAzDe;p$@4l#JEdPsR$AcgYG41q;r@XWLKlGiHJK7opm40XiKt@f5uIIr7Hk%Bs1@> zMwZs75SZV0!VO|nYR9+Dc(YHG#$^jI>Q9WCs3>l7y#nosQ%3-i z6(rx~BSgGTM$Y)==;LIsVV>a;Q-p-Z+-49z@ zLSSoWNWEqcV(K(PsV9*Vh1<8XDCsoTDs~t!hnkUR??&`U;v11zVNvoCg3kw`U@=&V zhKKx`2Np_UfuU6t_F$mPP=nH+iSu7`KBBbN)}iU=eoT+aCqQ(^&cy}{$Zr3Hh$pdF zHE3?%PXs~Gw+^#8=*2rZ$?ut@9+B%^LEyF%bxi)em!Ekp@2K;nK+SEXjhqL?l!N9) z9xGiP$89P3?ssoW><0~hpW;@RAzHqR^B5!{|0eRU5Gj5Kf0ONHG(68S;Ca+#h}Pe; zI%3C}dtEr+tKm~xIPih5u`WnGK)~wn9Qa4R>m8Y-cR%2bO@hbw6H?y!qVWg(y2ka+ z7;|?!thW*h*fZ?Nx;!%YNO~*Cfhzf(gIn@Dm4f7Vss_pLWR&E0%1-T)DB&N3wk5oi zl|HAPd+I3}(Zrk%`LRufH%u;bG1#PMbx6t{95 zdME3KIlW(Po!Bh!5Oy^aISzjCTEWO++ZpojL_yCLO;jKc6(I6Bhb7o(^jRh1B_}V; zqu2_gF?-|DAkl33Gs2y&MiahTI&kEUQZolFl4iF<{vb8qQ7%TL#}E;`1upHwk08XM z>vp4=cYx#imGb40vBo`QKr}MU2PY3jCLa|i5>nvL0U%M}8we*CXkP;mdesMM1B(*r z-X4`Mfr$O3;q=K(ZD%7Iu6!5cAEaL zI$de>4v47`%LIM2#)BG5lcD+0{HZloTM-qRz&tYcNc)OgMQJ;NFWAc55%F%F9+@TZ z?T>)UXG}X>f9f{>K^|$$yO9Uyi++m-87IYmy|x9z^(bJzN)V|=&*Q=UMa!-*)@@;> za2y)h3gWK!!n>E1f@|~2-dF!JrpHkyeF32!;rt3?_rD;{!|k{1NTD(FGlJyQ3N7s6 zFdyXdh^!l6?C~&n*K-cTo0#UMu77YnAqP`J%mldX=8aiM%VWfjW8>mORoD?O@ztLk zI}3iaREC-4{sHC3tY3|aMFQINF3sv<%9%NrM9vZxL zhaYeQU%BXHywp#yGOW8WeZo$n?kAfth>7YB9)h=+JMrn;LwlJ@X5)!e34KTU2g>jP zz8B@>>oQ~sDew(l#zZR}9z9hPi-A4e_(M%WgfKcl;no8U`UKsZpueDWFZVIg1U{>& z6$#`Ue9JxYMZBb0>E=MDk`=ZkUx&fyTHVxg;)#rkoDMl28U zhbqRqMH0h(CO#{(-}!j`Px)2}^4Q;JyAmJdjaCU)v3Ldk`6X0u4tX??v#MqTx@Wb+ za3@W2HjWaye(ax@$|=j!kXH03rsj;tzLEuK|0Z6%C*!^pdO6ckj50of`&`7^mmnWM zaxRdZslv$wV)?7*&Y+a4=$LR8P`$4b`yJ8RR1qABwZ+rvf7U$oNskR(A zcC58cz@Y9f^0OHV4ps(}V(KMkO;XJFBF)JAc>k*OLe1$g`#Xx02crqXiBPc@n5WIDZF&x!qL36dK$%K zo+Bn5{bjShcrY=(5#Pptve#N6-)cT&qyro0Siun9(S3|&Zi1upRF)o`-|>4Nn<*V5 zPY#?Etwz{bx2(ZV&&7uTAkQ;G*P;Uwu~0q8 zgchCbAP-ZjnQW@PXd4mAx=unsbhQzA9Ij$FYuqg2>bmQ%#St%5XFbsej0R}rlxexf zooE$m#@ZtU_6c&`M(Bg%P)Qo0!Gr+~U9I|EvFOZ-qp1JGNFJ@pfM=9~Sh#)JOcht} z9^PFLa~(njD5Sj1RPemf=7LqSxerbV@}||PZ{b;aUV1@K-8n;Jv3Gl3demJIZeQL5 zwCFkAi>Eh(vyt}Y8&G5}uHV!0EeVhtfTkehDM%DUhHO_z@IkN!Fskt^Eeq);LT!zf z1s*mx8yRX)W7U)Qu?<+F|;}@V02-I22Gx?F@y?#^;$)_a)D0nsuRn_z_hLRx1bma+Kqz!W^%~ zy|BylP2bD(9kmU(p0)wkr7y*E8S1vwSeG+7?x}0VUCp?kwoaX7taDE^-*ubu^nz}O zk`vRzaBsIA$n=ge-*Xl31cv);@*5$fIcBz@=Yw)=XQJb}A*F+%rd zZU&`zX>HH=c7#xgeBSze!t0<2!nkHUmpG#3fM{kbpd1TNTr<{-b`wW)4*vt+JpAY4 zKZoNlo>}A^$?e;#1xjVg`Gn{nz(wepp=n71UV*071Z)=q?inWFuMz}YKTJT}wS6oC zl6X7%($YR7;n2WBxB!YybkUg*&TZ)4CDWXkI)&>~{Vro&;YiGna8SgL4kfb14d(KK zF!MN{Ft!%kPN2jTj+{xYb4J7-+GRF8eGY+nKk5T>BFEs z8uSJNb9#x<6wLb1K=axMZxVR7Zi4^A+xx(0S=Iml`*VX6Z@s2YLtQa#)~2gQ@=2D{ zrW?3q>J%_SG%_MGKSpv-DG7)72D`evafX>znwk}rg{3k?rHugtGzCoEAQemNzL|dz zl??>;eZJ1QuKUjb|9n25-wz+|zOL(>^FHr?=Y8Jief~KM^EAqS&$Cv(bYiL{uKG3cy zR>Xp}mC-d}wXNKqH=>f zPFvmis6wi7a;n#PRG*&sR_QLkEvkW@2L|b>yHYY?G#ND3AEBqoK2t}*cvZ7$AqDQa zRnW5-dSYLz%5Hbht=Sm&{Sv47bi`#`%g2ms*?X9Gb&clxF2?7=9|%#(xb4#(GlQz; zljMtyt!IJaa~xwTr`d!f-Ad+XsKQ%dJnFG^e&X1A4k-40ltBWRlE&uaG6aBIkrcr9 zG6j$!8v^N7L(^r0bCe&N?w&mq!#UhpxC|b+Ygy}h6;dfep~{&7mt1?b`+2woM7OQO ze2X}9%xOC^+MdTjW7N2ba~>xmqs`M#m7bGn`n-S2j&e@^MTjaRPw5Unv7V9_A*%G$ z9i_X2RM5Q$bkkFJ3;uAE;S4mE@W4=~c`BVoVh=0o(imqbGu=mFsvoiMZ|DwzJhm32o%NY}x+7AhOZAN!v#n4j~w!PWR z4A9^Bh*+n3Gdy6wfm9E57M?2wt0}(9@6NKjX)`5>2{_Rog(v+%e-_W^&)TsYDQ;+a zqyhR7d&#`g4JoMA^kUz5#97t@zm6xbES9*H*5`cntIVl_1h zHhtt@18>w>@XMf&tW5Tidjs{!nJhkA98btS3 z3|}cuvWUuQ`Y;Mn=PSh8#ODOs=Z~p2O)QTh%!5>0XLa!p8{iMmAF^6I#H@5TB(4DT z^wx}u)11ZE7>69R;$%bktSbL#4Z%8#l{kwYRUnRb#PeM6$j;>8ab4nAFfdpuh!E{Y<t$MdUWd^(-sm=`v9Y#pIEbyvK zxU?MB(6xjUTRFqiOkpJ6<%t}%iObP)82UQXkk4Zac-+L}rvUImw-^L>nPX2xgylgf zxU&EKDEP$xh=SpQnce_01@`BIR;e)yHrWX6SAVlYqbZ!my z9#m;Q>DT{J>t36P06T;KE6oS&R(oQSeU!v*$7J~u`wx!?SEDFPpsi|s)NHE z^FM<5D*85P{m_2%E0NE5^EHNvc2==W$(wJ+IMw+s?P10eGX}b~J-UkZ4DHN_+4a*4 z=+4#p{fUYxXneeQEyIk5+0SlvtIWYxXs*m(4!^94=OMI;a%TZz@`J(z{EI3~z+ZDN zIVg@iauwrt(>bxPRuL1MIodmWHgU%i+%~1SXV;NO`5D-qUEg~&@w4U@97b;pV>GAf zzj+jDxOHY2_s2g$nYKP_q9@wFx8Z4TjKZ26a-}s&WX+r5+p?#E`HlHzB@`2D?Vq*B z>&^rSlK{WandfuN#0F75;gG1c@h*$=ep3VbEMx>ZH8pT0P=OO%iKcOg=&KU`%_BvM zK2^;I%SxXgJFB!TZl{q)P!WT1-QA8{Xx4VpZ^ndax{EK3-o?>Mg1Z{4R8PrTm5hZIiJy=iciPIimyh*5)3Zl$a3jOCnOqkk#`FKYf7{weUB~6p zTw{2{MhYoRTf=V+VcIgbh;rT74U1d(P?g;j(4n5kWrhu>cRO z;;nSW?rw0YblOJ1V6nCg)|Oe;_SD3(9vL_+E3125&yd^6`%>cCPtv(^!$V#1)ejRF zBWysh{wjj@Gx)ulqBDAP6%TWVann4)g8us$YDy+Z4f)jA>6Qd^m3F&576&A=B{u2= zX@xHw&9&4b9AQ4e&KLrS&Xj$gw1s*etqq^Y>}EFLWnpit3rm(|PUO zG@P%7-`@uhpWk1RE>A#Re4eArMqWfDuM=P}Ne2K@)HhEJA9s})M^DeZjZC{j(xKohjdZ;aTJ~LmX=@*br@rUUx%O6OZo?TFGl(&ALA6^*04>Dh(LPtr$8f(1!1HGzjb=roD zJQ%v#s8o7uT^e>;&L4o-&2VNE4XLJd2RjTGsy6p6_wBx((jD1bSl3g>RMJ~3M6*=E zI7QBdZ#x%uKzSWYT_QAF6v51wSp87r)g4{h^jT&aF5#B)WZRuY+m+==wcVwKr?-4n zxI6{LnrV^oP!l%V25%+_lHtuSNEzj~;l$}0tsRg@bGi+G9;CBF2gIK~!u!JOf6Jda zDBmFd)PDef>{MKY`K12~{%A%@{1Kl5{?w=VV-_(5>st(O2H7L*{hNXQY@&yNKeG2d zn11+Eb`bs$sm!qUJ)xU>F5831w)pB(X4OZP4Pws(pFL;|la`U<`W3`5q)aujP>d&L zFV~n>^eo@hc0^r`a0%>wD5*R9+5MhSThCX8$1@ZPtbQ<~Ez3{$L6iC&sha8&dWkHy zY1E}P^Qv%Kj$pG zU&hzg!Hj{^RuWwqj=qtbopAp)?^O$NiPJVCC;KYu=6zf(n5H448Dl^iDZXKg2VmSq(F{RFdvp2Qbx3# zlLL#GRA)Ec!uuHU(gf2vSezdrqYeNc zVF`45oVLk1WVBjiQrW*udJ7?1em~bzo82;rqfU8knUr(G&l8h%RE9|Qd)u3QO_T%= zaoW1Ayw1go+inGPHcaUECDP$6)c$;5wYUJ)7s=3QB3EiNU1&{rPcfo+!+qC(zY=JO z;7xb0`Jnw-SB7p_nHVNmGzaV6IBlb+(^Hq=XqC+Sk9AZYH&WG?GoPu{ZB_Z7w&e8MNY_u3NLyx~@)_-gm919-4K>i{sLH}t}0 z`0DeRH3$aIwVw`neX!D|EdDQUt#y~R^2e4v_5JHLB@a!m&uHF4$&hpN4y+O`=c9zD zjB5J>qxUsVW)|y!)~PMTNQpUu1DL0_(AQX16o`jrTuYU1++Uv;G=}}{Q(M`0gI19= z!7SF`qu(^rOs@Yubi8qur0%{Aj8}yPx28`4FCa(^{8V>nn&PW=PSh+lwuMHxf^m(3Dls>-NrP(@vibRJt^CUZ8!J< z4L)e@^pHcd=`wxK1>*oWXt`GoZTMN@UmXw~iR`r7oHSe&984laNq+|3)DDfVgs&xm2b2Aj`*K)k|ZqCbXnarlXDaCaylXDtwOngu6SGwanI(Fo3NHdy) zv$NK!iJTq$9;wB-;ELZv`)})??n>g*nQ}==yd+)X2sXptN%=p%QBQM#0E>772MF|$ z50d>$;t;^g$}kjg+Un6hBh-&R9FR+D)Ydmm$>D)-QW%Im!8l=^q2CS{dM1aRg*Qrq zsI#$aWq#qHKeM`>|51kx3>q@ES)&M3yHq+^dBa_akgffrv~PbS)g^Kxn5t7+e@?>m2x z>&-XY4XVu*_GkZe@brPdzoe5$5CheW`GZ%OYta0Gx$|)o+s@gs%9?AU&h^Adqq}pL z5vR&(sDHat2NN(Q!97*Ct~_)Ddu5oK=<5!)$&uPH(gYsu{@m#9oQ6}E5ySEK>neTd zGDQyn6pFmNj9AQod0gN7Hu&k|hTcT-{()dW?-W)Wm`y~CT+HUu>Cx*sF||ptF7Ntj zX5{RRV{9;Xj=R@cl4xERDRAR=^zEwXiX0YA?j>t&emz$AnXJe#ckLa0d)XV?@Go+{ z{5e{wjH#3-x=++jlTjE-2}&bHE){EO|+;@q0=-$VJOhx46TaQPV-lIO;qv6 zX}f*`WiE01<5$ze>BtzfzsYI-ZGMQ; z{z%Y5`)Y%DiQTaDjvol`y?@Yr)dBfmNzBRc-yTFX^|Ci-I8FCLy!V|9Nf|OD3x$!%{M79*Bj%WF-QzISsFp?`4OT;>X8AXN$=tivr244t#lW_Kf5M%EM`^zQP+n8bmc;z0q0nv{so?m(d&}mwIs-x#%)Yc6yKJHBreQ zKi-@a&PGC)X~MZu#eCuP`@&hCA)M_;Bb*S~B%Iq0& z!*O|JcbZyBgQF_0bQR|(EB*xe{4=V?UZpQxMmeF1V}$xqjQmYHWNHsjGxOf$DND5v z)sr@H7rmj>!sL^7LE3L2p0=BO+7H?Oy7J}o)cCBPv>&qkIXx96pR^y+ekTGEAgcK{QEmE(RaKhc`*_2cTJ|e-nXL_3SwE=m z8ltTYtG``P9lwpKMHrXWXo6Vzae>u4mAhT>+4e0|WKs*_Gwgd#KJT6J$@VRq$v^aN zc>FxxIm{1Ti-Z}N=Cc~MS^Kd(qKYytYXRCkz^1m!;`nFD%lCp{liMd$b_;3Xe3VUN z3z6Lbmt)^KO2EGFxEUPh-wkB_GflH={(bh1gvH4x1z7d3Yrdu#^{;Eb%&h)JS5=w` zSbVU8W{%!DRmg2|nm)-d9s)O&IZYqaH?+&)cjW6Y47pocM>K8=4h^$kg@0fwW8PjJ zNzf2~p*u+V$Ki{~r)3}&zi0mb@CSGc^6JDN*8j3Xj*B_2DlY7a?is-h)z7nv_&a2o za)zSICB~li?)7#})|PG8X@2cfxv{+{ z6`XCL_z<+g<$y3=no@j{ULMrl&J$koYtoWL~bq zRLQ)Y42j9(;PPEA(f;cZ<~X?gK8Kf_$lA5}}IJS`L>{XHP#r zuvMs?hr)}Htq_7WII_~rKNQAWeq;Dj*!yd{exo)s-y39CW$~$gzJ%^4_4P$?znqzW zSCGFv$X}hxAN1D~pjRmVSk}C`JvKYn`EtKEIdn(IKu#VAoEUwq zgjd7Hy_fo4d|bvJItyZ>9?s{n^aa0AtY+Ds(w9gn^!@+$Lf0KOP<&@4#7aNsev%WI zN98fX8*b-k!mXv@+n7P*{OGsUf|&&_^zus!xL!MSu-{yE5yT2cFeP-i&)`n+;mAxr ze3~lbWxqy~)I0n9Iw1XSSI3(pvb#k7Mx2ckJ{;wdFXV~r6Jj;9_xU8_pZfGp3+O#L zlU|lk)K4!BUt%eKE1;MeP4WI^}z5hiRHsFUmhp^RtwjgCh=bo(6O6 z_y;w15s)`CB;SjWvV+#heP{pkaqk zKC74VOA5+ah(Ay=q1;@vtq-Vx4%@R2rSCSse#1Qh(K-(?tG8!*t2xG?SIZakbQW70 z6K0DEpFw>SBN4x|BG*|lF56i#UZ*t_^g4mP)rOR}+?5>ZoEv>TH`+NE%tJq9Uf#aiBmw^Zj+@1KKu z2l;ziKVj_`kqdk3x5h#5z$9;Mu{zt;dNiSsXRz;KW4LrI6)R)iaPa^Ocp{U$%kwxo z<%hBhcl5o-?LZfMV@p){ZxnXbVb%6^%MvL^=?m;{E;8$F1T6a{bRo~>qRmUR(t#u9 zPo;UjY)pHAwA#M}rOO4=1oe9fs_7o&*=p^dWSW+Km(r(^p11-*3c$me85Sr*H5s5a z@i9M-jvPw^A|o0fAt1dBZUp4f%nXkS$iBPDa1;;*@mGf!mqY((t=~!Z4YRyza}bj& z-d4k@$l0v_fv6&fm!c8mOpo9 zrW?{~g!xrI?RRBn_`68^q%vGW2467;*@K`zkUhxk6Rz?51Px*RJ^@eB*oPbVWv6>z zUw3I=tiWVYmdJq1`K4bqMehnOa``;c5AB_(B_P-#ST`&(Pqau#|=PP@m z3%%Uz(9txKgZ&yS7&@Iv{|x*8jZCtw{pZY(ghp&W*@NwWl3sUp$Lk}qS9_4Vac?aA z1=|PwP?Wy$!>gEM?TdxJP`ab#pnpT=BYg#WIS%|!9nc% zZ+-bS@r!k5XSxKryL5-_d)XJ9CJsB!a{I7Uv9Wvlv`4>CcKu4(^~c(HK%d-8TKqUD|8s=@gyI#qU45O1r!tCv4;IQ zYu3B1zH2R1T2nTLeF82@VzlIX?p|lbX~u4k+lP5);5v5+>)5ut`;0tRoWU$O$*j^^ zas9rQ>b=>!co=9Iw=a7)hXOV4yx||o>XBb`0Mm>)uFj5)=V=zk{X2y9CR0=N%^@9c z=EUYan&-X^ORWAnD?U$bI{PhW#Wj1Gz!}c(K66=8%XxdU-{x(g<($1OllNu6i#_0I zHdxtm&OpWPhBe7rA2Jpq-ihRQxTaF#6oHuYL8qsiqg81%GYeUAB zhd4|#FS^Rw5-J;wSssN^E~k|Ld0=a+?2DV}Cl#Q>@es~=?{6%>TQbv)eR+lR(Gpr1 zbwGWy_A$WsF5^>f0pIGfG<=Wo*hhJ^xwka!43Z?Kvar=vE4d ztpfPCVC>O-T8_?=PMtTP%D4?F7XBD_8>?c@lwfr%w-jN52bw-`{vvm=(MDEN~ToKk<{+G11;J_ z2Rx{MtpxXaXqb?a2dpXP%cP`Sj+b1H&voBp#S8mtowhl}$HVmezCN*8ephGw6ZA;# zu0TG8ZrsWzSMtFWEBas#9)x`rPyO&3z7@x6zOaYArNka&>t5iYEHLg@f%4o>f<#Fy z^mz(ZRa8QC4Ng0rL%=GICsVc@0)f{^(QZyJSI zlkKjpc)MW(l?ZsfKP*lR2Y7Zz?@N-(^_hK%kxCwM9G^YSFDs(#2XUkyL4V1zJwVFy zt4jHoGsM@q!#UKVX|5hGFHo#!q#p4QU34)<2TIT!&D0mC=~Y^X=;lqTu0;?=XYYJX z#c@BKh4egq**NGSV-r2jeGxCh}g=u1tQ zSdC*imB}lsMNvXN0#&ZO)dH6`-Wh*qj)GTZZnts8#HpE?`r9S_eUT&k5(?xh!*??? z7&rBCWjKoretlKScsoV;4PEjj0vPsaIargkPlp!=huA6KWtjjQRpV6x_$S|Gy)-j} zF?8dU;W|Hq&gWB2euP1hfcPoO@O3g6ewq6j%&m3a(agO>zRT22q?}ooNU_ERLSyP# z7Tt3*&>g>b@4(1S(N)9U4VQK@%XkSVQ0F#GH5b#F+rlH?)b)ez_z-MusEk*SLDJQE zBR4UC_{mDY9QLJ+6X&A4^CD~bn;&WCZ&74$f9iyiZJ_J=^{z$KNO20%|}k4@yhp*-Y4KlHjcl<9*=KFfw9r;uzqPBzUD z@&~2<{Kzc+7DX=OZ(c)w*Vy4jN4+_t_Yggt@FsI83NfEq?z}l8veF$J_DrDJ4?OeH z9m}PJia6T{bp0pvsi4bz(o1j5`g1_b=k0-@f8+f~-tYF`4@A#s(WA{RI`j^DMkCA= zJsjwY2S-d4{oRiyr)e( z9ARi?6+ejn1CNjJ!WkdUIW(ZWRkoOeEDDSJUW(^eL;5x|Y%+r;(WkzZc;Lgg2lN&N zgQtg#8~nc?Ki!$cMfJ&`otjCv89x;;O=YeuK8QanznQ&TI2faMR+oqDS$+*CdgqQ( zKtyv##&IQ!TW`X4@ z@KaMjU5UCZfqR?J1Qp^Fm11ydj-c0m{p|k>z#W$fu1DZ%4Y=MVL7w56dD@ky*yizC z)9jJX>MT#quCKGj@(gL<)JQ*pz~kAco8$fG+SxyMY+3s3+RWo+Jj&DWgK0lbpGJ9R zF3{ctQ+2XFjplwsV|6r1*nXluRT^X6Wxj7OVzO|ksePcKKDkcsW&1|9quo7Z3Opo=e*-S0K`i4X4(`%D}QYX|AaAp6W<_)KqXnQJcPVW8zk zH5l>6j&jY-Hs09Lt|8AGTj?6)(`wZTcq| zt~34=2a^{9qW95Yf9Vu>JkzT$h|OT*WWIPCS1H28K+(yHasVUh+i@1+EkH5_s!A3Y zv5H|>R@UMir}-cHw#jI&|C=D&FWX>^(& zI*NlpSMmK+9%!;Hha4T`{tRW$Ju+G4&Q;X4nn{eEtEjAw2a8LY!0dH=FhAfy$jzl; z`?&60MTWz9{~hjimec$k81R_GaW$CSVKJJh0sb4*E2F5R%2y)8rht- z&Wi1G{voi;H^EN%-l6zRL6Cr|$`*$r*QIdy(g)yhgkTGYeOpsFcoS<6jKQDDbPx>Q zPn49#K>TvJ!0H+Agg=N#5-dE z^-jq6X-u?K3^6F@jrYyM2~>^vO8ALi_9I&A>g+Sv%3%*bjg8SzL*uBKs_k%U$K&+3k$1X`Fq6VjZD|n>Z-#pL_AW_d3ld&zE_^zF;@_3cKQsWX2K zs4zY(p0{h(0)2g&uk&_&>Bj`egl!4yzZM;1DmV5f+G$!y=v+hzua11tNXg7_yaig| zSHkTM+SYPaaU?c#fPS*r-A7v+)qA)#k0nmDQ#m=27T6jgM*9zOniiM`4%xZOJm8K$ zY#umI(`j079z#yk%jV%wr|As18|^>bX$nD8tac~&L^<;hF{vDByAKI48gZJkF*(ux zBe}l_C64wVwkS)EBh*Uyg+$jPRFUz#9W;Xa4!{A4)=?jp~$vbNmM+ zV&O}i8_$$*MCKs7Fo_(nvt0AtKee;*b&4{k z6s@cl>hrD0#gcff5DSefn&QkTk@Z+0Fzt2zq zt4&WYzgFo@Hr)%gsrW5v;D4v&Zz>so98t62@uDw^hlvfFVkwX=&Y2d~l2;6H$KDed3wUV-?cr54!CQ1l!<`{Lbo8k&E ziI8~Ej(ArOino*HJZ%3=+|D1-_dW%ay=S{$aJdS;%paekJJKkMkS9?tZ8G*v=R9!i z^%1gf)Rnu z({I};!FVDf;aHU#OPXN|msWhK$*^Rs%oXfR;mvpRw z{0HJR^v*odJN^z%^F&{;mM3A!|4Ej8{A|mz?*XTEFtHE$z{N-U$al0`4`O>7W#J7{ zjg35|gKR+`=6+^8hPh*{+OWHzAo%9y9}u zrk|$hnW3DkEy$!Ios?06@krCmREaB9;)Ovaw*MX5FfNtp3T0{?l<5gFNdgEYu}?cO z4&0a;ZLx5?)6Wl+royB=XTcRife>oWssinf>gFe`Ne16}Sfc_s z4eOu5J9{selZy-&$`Y5RsS0f>UCciWDtVkj;*`v2$Z7f_EHI9bz9oBgyEUweKH{LML$16o@*QWL@4A5Yq`@OWJ(6dW|prH z%HNe%-@ok^N>kr4nfXr(l>f^Rpw=a7$1N*HCbg@;^^(^`XcpO zNvSk#YxjX1J4oABYz+8RmRQYBAamcI!F-S+Y(K{sn{fOgzXY7R+@kG;0#3c7hT%6S z%s{##4GYkYP(Cq^s?zjZoW<6r=f5|ouO?OB6eEwO1kB+Hv;0L{GuCbhToSqbpES#x zeKWdwLqKCmVx6`W`WOzP@YbNlO+kK~e5ky_y93ufiy`rJpchBJ=RHFAniUJ3QPDYT zn!9URk0M1cxli?)^)%k&50UCU{D8@GI(e#=Ed(?kLxe?_Azj5BivP*h5pg%i!e_;_$CmC=8Go#e!uY@sv$sZY%(C@27OVelWa0%}6G zCQ&jOt_^eMe^+XDW?iGxbPD4-F8XYAn%_;6TtOzJvH;TZr&D~qRJAW9qcNqxo&;s_ z2j19YCK?B|l2;`NU04#4h~n1(M^TSAq~y86d9Vd7NvkOiZzw9A{sq-3GST#^_?0H< zvxOq{Z-2_-LySau=`n7F){$G5OGGk}y{ET2H|l^|qe=FXLT-T)4%Y|<*71H|U@)gw zTo!TW%Lptt(i=0|X=B4?sFsr14VwQmrKb6%uBBA(S|g88pEse;gkbJXxyR%W$1fsN z;&7~k*g&0mxN_+-y9a9$pP)>Sz+PoaCo)jy!^j|psQ)_6GUA}X4oT)MOUwl(ZoJPMVJIo%8Y4Q&; zK>GqUe)~xfS-&l12k_|90dEa5t|w!F$SrC4!~P)Jm>YeK zsSz5B7y$;VbcvsEsuFY;t>3;<`m}hEK4mNC<5)Depg11+_}&3$iN>VJvulbmhjqS; z)tx3s@jpMxA5cDJZDB1;Ef-VCRFcS(mZYlu)1WFBK0%e|QBaYsN240cU6`g$bL~FdzM4fDn;8j$cI<3 zE%62w`}+C>dSdmpX(1*ws6Uz+Kijw-RJ!~o6XcOf1x@P#GFXY1CEDW$Z-On!d?ktg z#KH4TRfS&z5Z+?@LA=GvG+0BFRc6xHm6QAd%5Xo=^5^Y%E^)eCnyM<{e&?Vu(rfFe z^G7DVPU+7KN`F%6t9_R!sA#-j(Gn6Z1L_n1^4*vq&zXK6&(D)Y<}Ydf&S9CteJE(8 zbCZBe61V=xQVDi>7?#YkuEM>1T%t+PblN1 zX&FD3neo>_#(S0V^JF|2FTbh`M_NeoLv*aMZF6bN7yru12wzRtw*3{D-k%eMeVwMe zsa`cmZHhBdSqA^(C#aUqv_?rrnTBO%Ix4_-#~LzDOzVjTDeW%XV#4ut%2<|`F`Nl; zNC5F}Wy~cb_{q+W5;0Hc<9TWL460^+VEC>eqYCMA6*(8B0Re*~^W&hvNI?$0kKKu{ zCd0olCd8|P`CqNzE5gZ)KS&~zy6)yn-41vA<%x0sBp-o5e?6~RZ>8l)H6|z=D$(SF z32WuWTPe!-68j#C->slMgG_OIP)jbSSiHqlHT+WlYEQF^ZQ@tl=Pw!Wc1B;Tb3;OE zDh~1J_%~g{{t1W1NO1cE%`$Jx+Uq;Ue zGuV(fu&7avkS7FAn@}1$Ewt;1{GPcs4(vWK$Bj;|l)C;raW zpvSfFe&vgeSY+(b5b|0VzKyko%HACQ}r} zO|CCLpuYUq0;@02N&rcHIhMB%r7y~8^+j9%53DaM$N%5!iyST0_M!BJ#cXl%OG&K0 z6!NI~Ar|gQk;Krv^NhwEKq}+^9!RAE^-O97ai5EzDimdXObwrm?Uy*aT(n^A%3pDAoJ4_1DeP7n!$wmrh_IvrJ4k{=kbq zfZ^b2rgwd~ud9d`r|A~{dft8f9l43^9}liVrhRX@{U;9$yg9(x>CTez)8_q0me5@! zc}J?dqEnEe{&hvC`cK@_yopkU%ty4VT@Eaw02V$UGspTW9?T}<;5-xm%2or&V&#Rl zy9QeCLo_=84J_J2Z6MnTveBoD5<1BvSYI`9yC!2NVZQAu_^XPiP2G63+?tM><+ol9NHPFa63ER8&R>jVP?hZ zIYoe~XUtjV?uNS)-aDW3T2@uM+hw;Ck8xR8l%dX;)xF*7wy;*x3uCoQpQJ7yBEJ;Z&%UEBL~YsCxKa!^e=_R5^%SQzXxIF`<^%&adz z4WZAZGiep{jn$-m#tHuS1-5nzhfx-QDreTu#2y0Nx==;ewIh_t)1u8rIapqV)ewc<5LStMIlA|3 zldSz#HhI)`uVy%gqx3zpjB=kk?v0A=&W+PS@48_XgbkeelSKeeaNB@zH}F>Gu0NH& z_XLhdqea_}l-LJNMIEc@U5e_ggrps>s~sdI75W=@mPcixB^SI%|7ZsGO7FX);#sFz zn>kg<8IMXU=YGEN)tpp*r|CO>GBumXp;+VMj_+YA8!rCI8yBAUGKa%tMNScvR8dIG zDDZ?S;56yPdEz5wXhFGmv$Wjp570&{;)|I3tXShTU!;6MWY@suUC{~TGgUu0i6>vS z)!~NWRD(-rz#z|0F;U{jp9CK1_w zX|UDgO+lamxXh+^nzD}C&p!zIH>qP4ieAJ1g|!@Dt%md*ob#fK`HQ~IzgKVHsr1H8 zLyi@HbH@ISlM`wVALx6F?wtLceSOZ7jc!-zv!tDy(Bh`}62|$gY+LO#c>==vvN;!u z@c@W_(kem&nAbXO=Hw;Hqgei>_RkeDx0At%{>Y$f>GzUnVBN}p<9j~b;19T?U^I9K}9FGf6S zJV6#vZqwVi@Xn4RuG|*z>uW~7?p2R=AAAiaxV!r{S8Tvql+79zs~OE!CiV@kmZRuh zU)%StS6w;sb!W-*)-$x3mGO|YjO+kioAM1qCxf>YYsn)BU z=9y!!d?PTh6^%Ne*VW`Vx5qMU=h`l5SjuAFQL#;g`OY8>`V7-y&;6{inWA1c)@jP; zX|TO~(zM0M1L^isCLtOWQ)>rz8CRsA7yr56c(3>ErMrV&d7hCLIfW?m&GDZQ#Kci; zo~T>~UebI;CCM}`#W8RGlr=GBYMLplx&0{OE{BnnZlE$*@%S37&UUg?bUE{{##c!p zp6KCos}Jo!{(0gGG6Ze;fdg{-a)G}^*-~!2)6~cZ_!V7Ol+ZHC%=Vq~M|Ie`F?n<= zb#C0db36QxKS8Wm%6o^@wb>fKYrh>G7>Eqvn4Jq>GWLtLoX@b3i;k>8D%$t3uRhvQ zY&A#&zFK3+eo_oS$vMt^Vd|eeHX*QNc2A>4la!?W3f##aX;*XLLtV*TDDPvxQuJxa zGQs13ISkn(Xf#6>zD=CS)S}oZ(y3KL-8J6cC*WqO(D64v5tl z#8@9JF;rL5vq%38A9ZRWOO<}WqZtS?Bi&W;sN9r@hApONS;yKf(4Ar((uy_Le635B^V(PTw4n$-`O-XmCo z>KQXArCFmEj0K$EV8+2cL3a^(+A~eQx&8a)JF5@R@RS+>rv{`(oYt7*n^>j-89(s@ zcBWaHJV~Rgh~Rp!u3xjS#=$^ZAxR86^L$s1<-#u8Xl*!;m(!5@$n}clJrAz_h}biJ zOaz71aT|U}P!22(kGDvc0X~$wYi(Sw(tVDEI&YCN`P&g(If5I-x2iizHSb+@+;adb zAwfrN>FloBJ4&hdIBYV>W$IwA8GhX`o=bQheQg-+DL=KYxQ_p;c2*z34E^85NkfKA z7f&S;MbbYVSTvi@6f3FdaGIwXQiM*nVGa>8&va0(XK`a&*qi^Gqg#@#642DraQTugu(3x&vHbeG)a`&nmO^cZ+2r0!n5jTjuX~VG*f-_PT`Xl~AEKQI#$?JH3 zJK2UQ8%HF`+n_?JLY>*h?#E3jX5zU)@ywbY76>iAR<=2TrVFu9ah>`kBpEOIsugJ> z7k(?_PY;r@ZxR`efTaP68nOrRhPQ*jkMGX~kcpK;7=XZItUDQMxh~ zy11g#)=-pL!(7!+Woj@0`nD0cP$i|CQ3$`92dHKczPT2fZbVMQ_a;Hx@fED{mKY~c z)pmEhmqUxw(74EA{1ZT#@%$iohgf*!necvQ==b3rV&LUw!fR%B$;@YrXOH=7I;dNt zBwf%oy6=0_rboX&HzzVAx~fE5&o82JY`*qbr)`U~T zIB{ci*FfZReyA`~1TA?#_p7-{)g;4wU!j^{|G5pJydAU$z!KCQjj0*fD*oGeN+lH5 zn-hQ|HGnPn4&bnA6L`*-mYc>~t@X~PTQZ!ZTl?-qaIO6i8y(8+*p}<}?wx>|%xUV? zS2PS|PA@ldegIT}0-*T%Nr0w@4aGkJz#yyBHZE0votdUqXO`F7OpjUB@W1#D+e$$7~iTi`5UXYbx7Wuna2X)OH(-lFNmYL1!GoXdKSY$r{xmcc}q2|GIO_{-v9abwQrm~rPFC;ymN#a!yPFfA`!<6C{kE}*W%_0RY{iCI1;N0P zWb+yAqvK!0rm>ZM-6MChIPnPgxshyXIo`*t8YxpYs3oro|0MLzn4-dfQF^wM=<>9~yMNiM$13kiQhrbUqznl_@ki z1Hr{@DL$E*ks_QEMF|VeR=%+^lY#!R0CB9e%(ha$fB4Uz_Ru`$(x_|Qu8~`uwhOL^ z{^t;1h|L2Hrv$K!C7P0^H6ZzW3P)EJF)Hh%eX`*dE$e+MC?QyB)mvSYJ)`7IO1d4< zmy96W(E*X#Oln)i*=zDq2!r$;I zHmk4WjojFT?Rm5(XDOXKvTy~Xr5172A_V`9r&@&IzwuQ2Uh<8nT7>VX@gzC_0i@xW#hn~R z*Yp!A1MVo~6@5LMZI7d}hYfGxxK7nLI(wU8MrHHsb4PQGfCeOduGH;Eqc_^^;gzwv z>}&%;XM46x8fe%_wn|ak*Au(y{C!$F5X{Amj{eI@XuU$m-rVS`heY>=A}8k-{xNGj zo8MsGzZ~(e=?Whwn8!We+DSPIi{H2l2V<%njHT;x3u7un0paH?{4$?o=Naxd{h9V4 zeBAZP(uq>i-FQcTD7uw>`8knOa|@e`ROvZ_F04$&Iex|H(CB30j=ee2S97C#O{qVs zlwa-K6MTU;aY}%#G9BUE#$AL7m*6m1gwsko3vcJMk8tya$ig7Jx#ORqmV9@;S&Pni zerrg`9SW}#vmk&xQ@uv%dMT=(ttcwLgl=v=#rQFGrd63KDS>O8IXMttBsU90k&=+?M#cIQWo>FQg@i5sCNw!mf|swuCxWa!r-WP4iW5Q-;dbLU&5# zGW{z`hPoQH;HB|Oj_GMEfTDKuqzN}Y8A6gv7|qf}4vDGZsG37H;D~CF4_!DWX1rKX zg-`;I!PpSwLAnXWp7k3!DqQqK{58{YSY{mu1C5cNe2xrA27>$!xycN--ud;OfzDL;&9|(qTkoD0FIG z;BcTDxS8X6Zs54iJA1Ud!wf74jbH*c%wos;P&-V381L*#O*#ei*<^q62|2i%8Axuf zc=j6h%P170Sby2bO<5C#Q@wL4 zc^K`?zgbKKZ9D*_1}9*0&a@2PGA0%3P7$g1r$o8*{+$1mF#E6)Dg@fmLvubE8)!w)|*j;H`^qB<6Ut|&t zhy@iuR1GlSpFL53If2G&2CVTfK&zE+M#QM$F+g3B+wic7@GN=12v70v6)T_xBqKaJ z)Yk-7@S_#;QLKPos(C;-tk(^HOE&0WKgRo4=6K_4DppGPpSMlA%UwHiXJ0oBW5TsZ z2vx0R$Yw1A*EYAUM#_qe7_yL8GJ=&xV*DHT*m!_Qce`W^-DgR+<2KDi$#79t#_RO7 zyov&(1=^HTx?^)jz8^n~y!%A}OeJ06YE{}?zy9KcJCZ<6CVn3Rl9K2Hx8XqE{}2AXwhhGw-dPL1n= z@nJF^Q0w|(uOFHIlQ@7DP5SX~Y4g}xhL8{uiqAM$b)U$n?xM8nlK6u*@y|;7HXHv8 z#%uZB@wm%pdwCq-cA7VAXNMCxbmW%kt~am!xO=>pzjLJ%aYn9-?tb&Sp|SIv=*!#P zJjO}Hv%cy?|Fyk$3&sci>s{TIV}9F$D{Gcb1*c^1+1iS24&5{DtnD-0WAwMvyl>D+ zGsoy}ry2j}n;Z-*iej9?fnQC$B67H~H4)R14s5tbx%qkwU&920@=WxOkOlt+Hbm|6 zSMbY(R}4JOzcI&jFnA!OCGbg@ZULtP`S2jh>|b!#7<+L0{Ztk!{t`0T=rotWaJ!aM^Jm{OZx2w+D_{v{iF7w#86(Gdhk2Yx%Ph{J ziVCqtVwNDWAeOcirkDa?rbp)2m>0X++FCD;j7EzFZqpPhEB>@Jr6`LNZoS)tshjIw z5N6e_`?NRVl#n}L*x6Nr?rp+1JMIlvA3{z|3*y0pBTsk(F3>5fk13kJ?Gyk<3htqkN~ZM?1aa`Pd<5|YKarV zx!Ffw6mql8l<%|dMWI7iJ53i;e%=LPF-oS`xC6TAko@)TMlDiY3uPM96goFXunX78 zJm#CqZ=A+EZzWI&1o)=Lg-teC2OWwpj)f9|H>ET*@)GX1(wbTCE6jH9~|0EKR+@xz@Pe`=8!4&(Bjs5W#Y%;Ey; zKT|sI7jTQ;&{movQN7priLYW0jdz!D%I;0f#GnNJ_I!=_RH_n@K}a|$#84o-{$Htw z3@)egk|hQJtP;IX8a5_A4lWbjXK8|35MOAHUbgdX*JffgiK^nC7e;1vT`aU(s%^Mw zHvYJ1%+V+DrRxA0BztApaiUgbxN92fg4^Xb=*v!SizD>5if7-_vl6e%)I&i-X_F`g zLXn}X&|leU?Juw%aLwv{TebVBcqaY`MR8S7VxcYpxIvXHTFeK#kYN988n2(eTSSUamrc;YY&mWx$#)>-pf9yPgSTs+p&M(^W;YhXD|kMi8{ za;_ULj<*--v(Y<~*s(QN)&Gvqb|(}2lMHFbYplnos`H5q7YCH748+FoQy~LoP>Q8g zaOaW5kTq{yNmf=ClVO@q+*y4}P6VS?sl)8YN{{KIzwj@#^h{n_^){RZDv8hWrg%}? ztSdCQ`H4{O zNol=Pquxc+hGxd=dO)X$KJIQybYhFzujxST_=80)gor9RM!U*sl29rhl&)Vl!YE>- z{tUBfaMqmVcgo6l$Fp#_Va61*YLVqLeRfr0x83TZ?JfTD#T{;Cas1wXll!xb0o;Bw z2o%+~f|@i=AXA>&wZGh(^q&j=3Qq?2NFi=WcFQIAuDip2;&!JA#M@HJFP_g0K3$fOm^Dh(g zvXM!{;n7v2%%n5Qul+Zpv~#6Xm0sspicXkOfhNVus2I@PJJRrn-qoCkY`aof|GX!C z+Ep$^`w#A7`^3)!|Izw4AXtQGisjlQSI*|61vw3KQ;TL9E=InDL7T`%hsJ;Jjjqo( zD&{_FmJ~gxMNet_iXNT9yE{G{^?fPZpGdPJXL%1wu?ggipvh+yVU8}?E*4x+Xl!s- zq(oIbmDBrk7sF7?SAT0p;%XQyO)X|Wu)C)BG11xU(|JV(oj<-)jkLEhGhSo$u@ar0 z0@3vltYvj&*Z_{$ZTc@z)-hX$@@p5w$m+ZYu7|6IR?Mo@zN-0m@nPiaMr)ns-|}Lt zDSdhwTL&m=)-cZEY$61sWwwiCU}Kf}XFMu>ccLyue6;LhJE!SSR;KYeeRi$y56Hsd z(fVqZ<5hHBlc$?d)w^oRxR&yAM+-~DQK%x@4xFY=Q%d4U6GYlt&{(M7s}CKPA34!F zYQBfo6_tmke_c^|X!>Uchj3bLd|;7WM|qzAB1Ick7&UojQyJS+t1F(HRpj<#bxr$B zUxAv|Mz@!45GWu9%LR$o0?n=iv)eQd=oWWT;xj(T2JWb8BQJxCv7;a zb&ZOF#>QqpE}C4HJZo*KmN@!?xKaB9mp_l%U~PVE7y33|$v43GO%PX3Du&jn-6z}o zYHOOFM{g1@(*%`AaMJVK!d3^&*MrKV8DC@nk)2j)SGwziI7yzhFRR@@NZN^Fsy9pu z`7EDF)foGt#3z*^Cr!h4RaoU$Xb3Re31%2>`&qCTGPwOMFD-A%7F8*QD5|cY*9D6U|TbZK>FtWz}^BLZVA8ayhjH@Qt6SG1~Q2UmOBhHdbrbS;aa&MFB+r|HO z)DbMK)CRzdy+4^XmuCOkW@kP-$FqiHA+FTUD_ED86c4s0$1FH@nl1-yml@1ZhNqwb z*d0nEH_e+KWZxw*{@_FhHWgnr&CDJQ@dL;5I3< zNnp9weu+gS>iUp|aq7Z0m@bU-hNdE(intT~48PM`6WWg>;q#NyNXR*jxpK8o6QaBz zocIIUfFSORIcKEty*ZTfVQ&|if&%okq z^nDGR$WEk|_tQaovAM=)VP}x)ygqy&J8aDZUv`ct&LEp8=&6 z?`84r99#n@s%QgcCOz28Kpu+4+wsBRTM5Qb;iV~HsN<;QP$l;%Tt!C-4^qA9p!K0? z{^ugiZL>@y!d?^OSZc>9!=ei%KKCj2`Cyw@a7fLt&|9RQrgtSDO(Ise6B^QX1FU><3`SW%kL$uRtseyGMzB7`o7YIG zO9{4G`+%&^%WjNb*L+o} zf5^PZ473wh+{H9YYmB)aOzx}fH0-LLqa3~K{ck;K-KxZN0?n5K#g8MC&$KeLYYvC1Z6r<;A(N~`YN}&il-8{x~6xS+DA1r zr;%DytIHy3S9mt~YQRmZgi``e)UX zL|TNl+*8W%s~76q^TLlKl!m+cvJEEkRv{=X@O3&+6)e|?7?|2`_Fcb!`! zuExGw)qA?=Ik(YwGZW>NQd zu*%b2bM3?4xd!!%eboOLpq^Yk-PkJBGviad2YP>*)O3ISI@5^i&}6S|c^U0QGQ{=_ zUe(kq4a%W!UON1vRf?F?FhCl1BIbufpTO3*CsfA{rc4*Ky+v4^?iIXkQ8WXEPz zHJnDF@Mv2&@9U7|RnGUU4=6ef*`0GtR#kcN9@$7|Mnjt;`fW~y6mbwS)7d5wQ5Tk*(1}oA64Iv)kRo7Fb zM^%A~iPfj7eBhu}4xvg0<3FW*hLY}&+?JTcQDhGtp^7|h98BY%Xq)tO6hB^?_5@!wG^LcxG_jw{r+6rkOtTI_mkgOUvmO|&GYp&Bz+Z=w}e$q zLkWtSovx_9eN>i4vK&lboA;C6@|y$C&lTMWJj(pSr`8WZX%Qs;f9>4J=HZkX)l zz`Pu{dUnHMM&>pIs|H6O088?yDa)mQc%0M7(1Xo`#5p^_Hfb)yV2j|Fs-K}>Edf@s z?VJqkfvtnulj5`NK_8|5v7FN(t#Qqh&QpJAt17_OG;@rBMmwhS2o<-G96xfHaB`zE zBTiF|M8D{6p1Z21lFX0z#Lo=(+!PZ|a{F4VWeQ~RPbiYrd%<|(JMNh6(bw|4G27R5rs5IGKRn1dgN)JF zLZ;c$#q@Qr8@!&`!uQVSnDDSSF`u0(KsCDTPJAaa3{%HKwp-h?+o?Zn(NK-)*laMB zaBb!QMI%R$3U2FsvIdT6C7D1{hne*FC*Q536U0y4S522t=Z(qd6o)k(10xRYk9?zR zj1Df!>OIao{}mQ3ogXfJ>bU2#&;L7@reEatAG$p%w(-<4` ziqM1<#H6vRW>)jkaqTy_7GPk06Z_^n{>+m%=I^}N_yPR*{}Z1lKP*0#-eq}~JQET$ zD&Vr2Jr9Oe{O}cb%+|=T6h$b!y9OSZ{wClBzZg#1Eh{e%IO0tlx5YeNl`e7wA`H?0-;m=fW))0T^0$O{g&u#8pa#un&!LP>q#m}Lea(^gRSJq@wv zb;&kDW2j^@rV-OTOpq`T`lSVU=WEShm;qZ}ERvg3+NBXZH4Ypz>Q_5v3>>qHzv5(- z5RrCi5Ga~kC%P<>v zH$-NzUxHf&-&)>!8!JE`_z5<<1{YViKu<6SV-`NJ2rJL>g01$qApchLp5JPJ!$m41 zd1#M4VttUwe0tnmcTy<2YIJh{!t%Q*zpRx%y?2`NzTe)8+p>w&vv24uQ@$XgMF!p-ucbT)puYUExO96Mxm@_ zS7ch62E{jG%#5N|p*Q|T)2(Ob&{QLboS6fVhC?1vyX|$=(6{(G%y|oss0!iHn3#ov zG0L+olE&Ek7c?|%ue7LyxPVAspW;7fiFWV8^!~%Nw@Pb7L%;B~DD>%o86R_Q{v1pZ zL%znZVTe5VK@1VWbVDD=7d4$oiYIHFrc(h%N$=zD@R{<3&?P<^{_5oj*FosX!5JLZ-6-tPkY{8wOem(%o`zH1C%(9Ea?5f;2JXty8W zSU_K{XlY(NpOLc>;N==--%C|)cVGfCL2z z+8I6ayY}8&E%ter__CG2eA$9qIR5B7Ih2WD(tF1K+2Xg`EQ*x3CbnFS5v5`J{quhB z-+`?3^uq?dzdfkD(o^nE>)UC*k3J8aoOR!h8T!rle{22U0{^$n|E=;2#1{%?{0Tj>8*`oG2gZ=L@;+W#&0e@FShHU4jj|GO3YE<9iJf4lwPzx%(h_`h-g zx8MJL$N&9@|GVA%PH(mU$$!76>;~HvEivs$x;&gK4AD*msUbvs-+yOiC39&uR9WsR z@r%v29}3y)T1WzO@GM$V^V6Xjn8LM`HWxw+*V|-r|4KEItmSKQ6PB_S{YoI?catAS z6$4}TvkAt)F~y+G$D|?k^@DXrz$p@(k?4={G^48ujk76H+jOlbJVqO{ZM2RIE5r7D z022?jxN5v3|2DqtP=8^I%{O>G%JAr!5tcIMP;YT$Sl1Bq0++P6<46tg&xo!XZXFJ4 zd9>t#9W&;=r@xW^FdokZl^j+Wc82W7hS$?`w*s_8b_6Dg$$7jR;)=nk_qWsKucv7< z>nq8dz8>1Vr{zGt!|y4CcLMqljW5PI3DNfd$KJaKMpa#l|1-%1f<#Z0pix5^ZLmoR zHc?th4H`(oLjfZRh))b;VsZ^hn#}M}9>Ga8r{iF1YiplZs_pfDuWfC$i0^~|0koEf z+C&~kYjuV}KvV*Vl^lwPOh5kT1s0*y&A9nC{G6oZFZ~Y*~d?R+0ATVdXV&=uS zORwSxbpjZe`ATrko93MLu~QSwJl9$UBw^oChbWuWN)lK6O35rZ{`O$b zU!`2;$KU=+D3Ur=;os<^(w!l0dQ0>NfJTS?n>N+Vtkb9bz zKPT_DqtOU+2Eq(I$vt*h_5N1VjpeV<7)dg@Sl=yH~$&^6rNhG=8VwqTw!kklxEOqv{y zY}Wo-;M^}n1GajHSoquHXfN0!r-`#Z&VAWybZ>w1 zO(EH~YKU13#S>yE?(Dew&OLbXJtG^$mbLecY?AZlo{>+rz zN7k_{0z51u^0op_&?yZz)dq^VjG23jlSm<3<-jC>oyAO@gk z5L?g4kF5Kik@Z}Ni4x4J3VYO(_)xkh%44+omjZ%mK0&Y?u)xGzu0hM{y6*+PDw^RjH+q{!4&IrwBti&nu5Tek&R!BETslOOI#Tu(-LJ40? zI6%OJ1(|oYy+-Tmi8P<)|G*E3Nm9fR5)yh?KXm6wJKok?EybphHk)>OFABu4b-+21 zDS`OxPOsbC5ST2vMcw;Kr)-TaFfHD^L3v~EEl{;P4Jgvd4!^VGO@%+wDU9fg=c)K( zf;eJRYQ^dE4YOHSs=TtTZT9^FbpfRBiEPv0-Vqj%@L3}&Ywm@9 zT0`#+ZKa=M59jCA`>Y}MsbQr{uSXV}o3naCVF6?6I9xe=@YPF`hdYUI;<3v7TL5{M zt)4LRHvK&EmOU`D;<`C{Tt(DAYjq)8eIT%MBq{) zoEJLA$saMyp$~W{&~0kqpxIWGwYv|Qs}GaB+5x76sz$~Oj}H+nlmmBq;bp6X1aF*L z&uf)0D^oyo=v(}!S*|DM%ybn>^{-l4SmBwhoRH+?sxWpAksXB}0z z*gsH~2rGZFw=gYls~o-pqRLTsc7R^R>#|zUAd;{)+l7T#r$EMs6z!Wpb#n^1Xp zK_EA^dplda!6uEBxt=4@@xWWMdSuF}PXh2D**i@5DvPwW9KL7a3oAYZo~?&@ym;}R z_5y`1p&|=p^J-QPz}h3e;gOfnKjFuQq`(dM2)?0#$#~q}l*ZkwLV^2OcpQKGU8~y_ z_%SwTQR_WOWcwmjwBpy=Qe_3B{YSA!7+t=d7`o2V(*<}4{tw@;KQYrcg?&hPHJ|Gu z-}kwWQP*>QS8^SzuJe4CbL~>svwatG9cS+FfAD_&@nY}Q{{5NtCx$H^%ZhKS1o=t^ zTKpSW{JiQj25?dm!>9Uzgzol zsu2&wzp^*gxw7B&ULvcDtwmu&OVHU;hz55OH#b;%>#Bb?n|N79q?W^cTb#x=IO`k*{opEoYUwqRyjbj2wX6WfV_=L2?2OO6HKvFVy@+gsWCTBI| z+Dk|mI17CZt=vItoLtKwiFCPcERKN$n=KGU*kGQa z_L_ic5VJQaRg$y zy}y5Nr}5xLc>R4e_|6aCOQkIWH0VM0YP0(5-r7mcqzglHdqNMMLksEHOE2~-%$kac zb{>?<8oy|fx*GZ0do_S+3Jbg=qf@*?8+Ljh#{Naq&v>aHm%SH8XY$1}wox-qebgI` zH;{+)MtUDA5&m}(nik-{_d}Nu_?j(_1S9mNp168_c zpv*LxVrfdzO{QU|g8EeM4?=r27cgkv-nhe{d_QbFAm91wj5{U*P>r3>>ss_KPn{yh zcFObET4v3#v-!I*NSvogv+=;Ruv^eY)6@8&RPA7RC=WC}M&o1!wYM|;860Xh8n2`P za-9f&ARH6pV_CyruwScXD6~D~wOttviT&#onf14g+9qz3eCR^>M}n`f+KqE8V(yb- zdw*bY(V6^GdXtxA5$kXQI;%hI=|%~XPU};wxU4l^Tzx=Rr^}QcPHHY!zW7kgT>RhN zGVc?j$(H%AWy0(Zd1cF~01j)_q7&SP=5-8Tk`D zjDUKiqBhX!KX_d>?nk5tsi`s5G~6E1K&)lA_t z0E@rgTgsafbw9w`idb*H|5%*w`}Q!E$_rMhLC6hCi8*zdnt{*$$JJ1f#MU6!?*Eidp#H#p18gu9G&Ge$bh zT@71(2c7KBRc5B(2pYi65jYEIp0O_BA_a5Exs!rZvbK^{Lbwt?R{mRlYD(yY$c^~+ zf@=X$t*8K^XZ1 ze=|e>0ZOYBjaWB%$tX>}Q-J%NAy=x>uTIIO(cy1&9u&OdAE-0gLN@^+1@;*djVX#S z+ocL{8A1%b9+s)xuHxPz%sgIr+0F1vM^}8BqBKJvE>qJ{)S8Cz3AR-rEp7m zFRa1uJi++xGz_yl<6L(t7Q2Njp`XoGbi4Z;!d?!D*Ql6!4BptZ|6Rj_++GIN8RyU# z*-?owim!p5>wV#p6;_e{Bp!&!8t|G5sn%ms7cr+&*9oeE-lY~FE|FgMQH&=< z^(u}v9uWLV;1^j)`9NfbUcXu7EXjQm5yOx`3Ubcqt)=DkYQz4ScU(MR{uK1h9iu$TP6%A{d*45&EavMr9<6PM74EG_(bPY z#q2xYy*qpz9k7a@?CszU&Zc*%lA^5F{qZJ**OG{RR37`m@U2$=-AA7{NqrrF6;#8? zy4xNvY3jWfvll<@cj@^&JeOQ?nGh5n0T#Q0zM{t6OHCddeGF>$#z)@PWyWPl4vFG* z#-(Z|gpZ2%hpi4j%!TNy_@%GPwdKEp@;{jn`5ic3lk!3Tyj`HOXFul2Q++y29r^X? zZ|A2<6I=F-sekQIxuv*GT%Dn~piuh7K7I$L(S!?Wt8UK4oKrc^fOmASqNWPnM5@7PRk_66b8AGVSEye>aJGwE~`)$EYYq5%5-}X8o>0em(SDs*) z2@>IxJS^YSV9~cE(f}OtQN~pc$GGcq@!sWiKGnX`h~6FDlEp`YGJy`(m$0a=s;U#CQgPn+)+nQzd~ zP}P)RWojn&HiK)`n+XX1Ug(|iAj%_pxHQgsgE3E583gNjoPL-!P@_nBWfV~p`v6pVy7@f^yeZ0Ni zOXbRoZF1yGcu@~leImhK+LulJpLP4v@yf=Q_DO1;8+$=ixY$+e+|6`#_SOb1?cW+W5sF8wUte_Gsk@c1q zbZ^RqyIw;c%5GrR!(R%B*&g|^p3fBh$T17Hv+Nk|nRDJY=X}J*I0buTk+(6ul{x5O z%|%ByC3=Um>q83hEcM2&Qj(dQ{Vj$pDp(!q=}F&sw6&gM620dKd~Y)lYZ^;CssCV= zd7~=;&Qq+$kQaxIhN+~REB0_7TKt&iTmSlG!u_;4{Ev zwFy4%7xF!K5K{wa_fE`SvB&#OBuQjn{_IvYrJx`;_lc zRE|Cc{c(R(_Q><-Mkk*O)Ck8${$L)~Uz9NqtB=q)-wlsIxpjS?&JFmwyiLHPmYW^! z@O|)01!;$oz%(YicW_?rMV2MV?a=DgkA z!M+9E?^(hOw=n|bomg1~u~wQ{LDyzSCbK|14mXov9uLpqr21ot7npxn?VmlfGW=gv zn*|-~`LLYBoU`YpWX|krWIVQkg$=BEFxI_i&ip7aGd`HIcPP*N1s}x*rYD%&%$eJ> zwj!VD+t^^0wX3=f-UkoL_8aDNfVIGQq;3}z8N(Gop?JqNi~F}A!!JKf;Wd3 z>@htk#f`$1bu&B6F8>GarkQ&pqtuS<@+yS!hf})_9c^_R1>Hu$3G?`{&%7z-5h{1t zd%+tr>yKwIe%rs{nsestVdMA6o6JuXfKN7L39Q)8LYp-bKMc(5N^f-@mo;Ou(?>8z z?NWVA`0V@gTG7gVB#ZucWf#0{tYLzS2+G^(o1vbGk{b3Mm$09IMMpKC!YPP9nj05y zG|HlMKAXWRTd8EB($@1yV^xAcvH-simN_ZjgI_t!%Ixwkqf{n&d>^4K=AB*USAiAr zmOYYfTwjYdPlRGwj*(&>#+?^es1$%QK$DMMxFizx zqYTyIj}ML?+ShBQus4D9_5n}tJ2@D)E6Eyi^2ipfo%Si)W<+*r;Y%`XBb^tPty@8ATNPE34)(UdMne00{k&Ita@8hLneRNNt+?{ z5eW}9v)$)6*q5l`uhM{cBpJL3n6slB2|iy&s_a@MpP*4`tb~(Kw6fPyqkL-!Gsp}7 zBX|_0K@D$7E_RhjMa|S~cmp5SeUtj|`=>^m`QB|kc zVRd>t*zf04ZO7$fVw-)had>?7e7ig9kp!0w;x6r$`I3vTc_hPhXQV)2O-RcuYhqnT1cW__x zmF1}JYSkyg%bgYgD-j%_JphE?=~G)WO7%kb@_tNM&wfT^g5EOJ_(-#9Q&7P_x2<9&zJgx7N2e|-~#++w~n_ceI#D0=yxva&L|K_r%BZXw2+i^RA|F}HL_ z7(vL__gYWH@G0;&yvZ*Lu-QTNy2EUhNje{s+l9Y7H7#(93Qj1nG9F(DAA|tc3-OFjs5*}jY#=U&XOI9wB zG#(HaX9+CDbI#$Mu$~s@2>prAZq3UtrEF<r^H0hQpDz}vB~pSKpW!|tA0|+@N8+kb_Hi6D#>$6 zR35b-uyhu7{YD{Nqv6E=Wi6Flj zNa*@@jy*O_Fq$@zsDyaJ{7eKH$7<3jyRveI-L4)MUiN3pHMCa$M#UD@_OBEC+pZ;1 zhMW?COatu+LHsK;T%Nl6vcN)VY}U$*FQv8Lo8V;EkaZ-U&fg9mri(dITk1Fpn zkyqq*&8kN*)?^|H=XQp>VOfVRhQsc!wSq}lq^7fl7LcX_BX<1FXs9OqAW?@*^If)y zsTY^zY3S486MIF5(Qqqp#MXOO84aVPEApnM1s`y>z#iG-nSBdSoM$}fC#N{2tmp=u zRV5S5z49&!|8x)QY&u8E@%_n+1X%oXZ6&)HH=IEI1NXaRDkyM2t30_#Hr7lg z^>IwjX4GP=w0Li7N@GhfAqF|c8#nD3qb$xb=fy3-A55o5O_o#E$W zAbCynZoM**?btjFm}L&rx0yS9pBS$n%~s`!i34?V`mt^b5Kqr&>>#Thsxa34M(Sp@ zCtJ@_*+nTz0atxOKO?s2C`Y}~u!I~I|K3}#`nfMY#opgX>gpR^$jlL*fv#W=jiok;6(y&c)X5SWD}cs<9A^V}wX^yYndB9F%?*mTgouKiCi~X~|G#ZV4=wBYzRTzcn*_u2c`T zrVn6SeD?Od@MrJ$lM$Nz=HQA$fT|p6B&kmO*bJ=}e@m^a-RlS(o!dKc_sFT_zf@ zB`ObtHIDuhF^kU))qIN{q{~S#qa_w(cZj|-_zm9gG#O4>`w#k$jWHU31}a@r)=rx| z&NjI+@DXw*80&6y1}$$UiOKZr;H_Q8YpwNP-4?9kLzffc(CT%&ds2U0PIc|^>@4R? z%0?Unp=`9lY`w4D{5*<~MkOB0exXF{T~=v@7oivFj5ogu%^|!N7OuhnL`-x;YBQMp z`(woUe{d)^F_7uE68UW0ubV73JVX1fKSJ6x;mqmWa7yqrBwHN6-PhfS~S$#*u) zGXHTVK{7rHCzEY8u0lPi%!n{MR*RMqD!QoIzk?Fxy&lo*H2P*GCayDZHnh}Sro{-_ zil`WHqDlxdBa|l^$p<7)*GM?7+P1BkGAs{>-!fi}cx@GJ5=q@`_KFf1E8Y6)_dJ)uTU>$bRmE(D#*(BN4cAk5N$#uQ&n4xU&uF;N zYGrBIOIgaCVd8CGAr`k4BiQVRuP!AYk(_xjd?i#^Lj0c5@Hf<{{`l2K;{%AGer3#6 zC^=NTc(pB5TO-N%CFqE!Mc4aj-sof_(Vo3BsS~AW@u4`8Yc4s?fM+-D0pPzp0({~? z@LL9iA1Ux%IPJCowZimDE;tWGkq*?7+ZfsY`d5nQW+eO{WYq2d4EnC8ZJk-4ze;^- z$R_(+KaPy~n6vUXjE1Em!7!oMVa7w1Tm#Wq282=|1d=2njX%Ipxeg5DuIUxpLNLJ$ z=1=q3-yBx3x1TSMy^gvCQa2x>i18G)#(n>l}V3;9*|vS7ZHWU#Y&QGh;K*nx;G%6 z9;5Mbsh?#7rACVT%*#2ACh4CoWSaj-ED2~w_$hET+nJKF;_Gv;jbP62kde~^-+@We z5o{n}(s}e4kJxM+^CpoA=+Ugx$s-kuq+wc4*A>TP0J#MpQa3In){MuA!{xt zTYyL|e2`K^#QspG=?uSv_ygAiraE7-RlOKpHpaPNEHe|&B-kyeY->)9GtLCbM*r&H zjNzdy*~vwT9pN~|Lq2djE4G)tx_&o;mO|&*V1Qw|=txGAed9Z);@c{!{Li=P4)N*}@`Bf-2o+65kW! zy>L)Tqc=A(RnU4YE|~KW`6MMcGl}^yVujXtjJYM3e}gN#-Mrys-DhY{a{4w#)saMP z&+uzsg|Rq&lY0U=t9haGfbnYnV~OUR#MTevXbWln!=uxMaV$IdM!G8aClrHq$xp2` z8h=UVz|2IUwiXO zP$?>(h=qI~*!ez6?#p+!Jff}S>9F%W8HaiKvWUE;-DJ7*AtnvpsK&|Crazmoa{C;C+hpXj?dW6e8q_l$bR>#90EmUaKU zS75C9zW9PxP8XQ+gE`w4Dk*rIribyr+7@E#Z1f-_@ti9^$Z8Y@$-zIZn$iN zxrMY!%swO+hW>b=s*D)>9HcH|8UnX6zQ_OZy47&bn9jBTpYbZ`-1VY3V@Z))S?u2m zAqac?@O(bQ+4!7wCu7J;0A&>{D`mXr@V*if_%k7#&K96EI$As8#tWNKjn$R1B~mUM znHUY(k{_ZwTfk5#7=X@~CtbWU(;1gTo;~CL_BbaIID(LmW~!nLUKhB_+{I!c>z#o+ z_LPbUwI0k9Jph+1tD47R3Q?VXEC6hZVI|)~(#|_uJI196UcLIc7Os(@l0klUE4eC} z=z#Z~aTx$buG0N=|6IcBez|@mxwdw0+p`tg_H66i_TQ0|*Rwmk`1kS#6DuiMkjQFB z7Gr|7P+k#|_n^*2GoTBqWYv5I9e!{8jrKP|I&{lk5Y$TD9P2PMxfhdxEQaYzQwIOa zdJ=RVCi4h6w&7?m5RAP}MEGXuLoNS=B2^pD|E5(>%%)hcbeg-fJ)8$%dxO$sK@fKe zZJF3jQ!swo68If^ta>OJ|a}X{trnt z`EVv5zSkndaw^Pxl0*dP=8pGGH#@Q@Em=AV6UVFuD3CU!$snAx>=Q=gxeSwJL{!YP zuptj-&_3|U>#&zZfP{SW_*gHFOOY%6v)~j_lFIBIMz9uuKHE~-cNfR|0Nk;@M`kTG zh|0F|0*cKbqSI=m^9TIWdDAnV}JMJghzA5qm2NV5AN5e(=PS^zhL6`sI(at00VFEYa)XJ3?2t~~LhpuB+BSlSR ztX1(ON|JduwKJ7lo^s9oG*qXt4r;m15H%7rt|^K!)_jjU{iIQrEeZzclnz%~p$kGC zCUtoWdu?&UC5S_BQ3BZ31gt!4#H17~{9D?H<&W59fF)nB84W+A;ZciuSv#%n(~V-w zQ;{a;V)4*8XQ;EK=#o(xEm;Ju?Wh&gs|^1cpU-MYWI_bQ=*7=?N-lPyC}N+Lf$Hvn z3duf=L>qS-jg`_nTl7>)T>;7rzbh9>qFxh1&XJ1o6U^4( z52rrC179*W=y5KNI-NfGMD}=TXeW`1ta*MKp$z|(1(-<7Q-HB7LU@D+BH|Sk$O_R+ zM#ES~iq34xllVafjj7UTxS7Yul8W|y+En$X(v5XjQCNJAEsk->>xuG?}BWWjX3LFi4Q&KjlxxBy)vYw`K zFGfa`T{6=cLbm}Sts=aU2hB8@Tm+6m2+QZ%nnPoS1U9}6FGhh_KWcd{tdMArcWBdnao#;6)FdfYSp4yjrWNd zmlOI1Pw}er>;`2#^1KKTYGFYJ1uCTy1%uNWR5UqqIsMxJg@oe4uVlpQ_ee#SH`8m& z=Z|ESXI@V>HfH%|Q1Hof3XoOcH)Y!P`n2kaw6wbUN-Yn zKSjNbb<_ByFze@nc|G3!ID<{H3_y7cZgfaH58BZ@m@$=D#Yh~48RyyDQQovQ=lw^5X?r^m z!FUP%%VPaEwGs7=JyDZOoI&*g~V>XJC$8Vr7Y3V4dk$T9ky4DWGAyZT zeoAaL+@cwpXPVg1Oe|@3_W+IB$Ug?R`5vQ~TJcYMjqeG3P|D9R-$eqzNOMkBMi+B? zF4mF-o+f0ZWn14LL>Y0VbtP2SVV)2Z(QWk}wyKAB!eEOKmuM(DkP-SL3w=*7{TXbH zl^6BJ{4*Lm zmFvi!6W@7YB3cw@&$u{x@_@d9+FZ_UKP)gO|M9i`*vXx zanGFFiQekOc|mXLSbD)3w2iNL*XJS?zje0PFL!<0;hpGji^*P2@nco-EE1A>8!yCS z^;PLtTc!U!QV&}FVFmDXgll09`wgj&T&evKWq&Ic%O?bUY8pwcbyfk~2H96UFr*!C z2oV;1VXTXlc)`zw)Dn>04xQ*k`mfluBa;DN6YQUY`0%gh*gDoE}9 z|0pL5wdMO(degq9f-eUuTUMYdC5{g-havqy1f#5UqFQGs&wGg~Ir39V5(ca9PpyaT zJrRE>fsQdsoz-`LA-ZXZ0tn9sO3732FP4cy=Az+OqTw@SwaS%h-px`>t>cYHU#ekK zEu-LFOVg9+fkf&u0X2=YSg3pvMCe-(;oq2vdbL^e4KsLD3F^{-d^T@+Dv_Y|l?oT> zWT~{;f(kvPS%s>hfzhxBP6W=wNH*-`s_|3r52Sr;7XE;aUGEQqvNUpjV5Y;_=HDFS zY|Vb(oatCB@i>W$tF0i!7|>~JTBSg~k(w^!>G;t7R*&*JQmx4Ts=2PTy#VCW7*KrG zK(ao~+TF;ERb}dR-YKxAoR=W4GrOryM&!JJL5pn7mUlyq#nOV)pi7n%S|1*;xKl|d zB87&|vkKeRhny?jIIMWX+^iOw!+7yeue2D!#yEjY&7a*bl`F38QmmJPtOA7X!v0*& zGB0_hiRZ8u3+vxFUUs(Y`?3F??8i8RuhtzOvGV-&Vjh{xX>$e(jqGj9zd*F1auUsC z|HfpdYWnZ*ZGZnr#^Y{SkSZnp2ijz;8xg$G*|4*T5vezk0h6)r)*gK8hTTn<_zv?j zWQ=*CUwx6@s;IVy5bd&N#;2Y1hg`cpG^e@DLgm-SnPpsqOeNLAd3Y^z{&&gO|M--=~qJxAx`AZiB z9HDpu{7h?IdPiys=S0p){>?5V=C;wuG@BFasWj4@b+Yb1VMC6Xe&2P7CW8<}$d%n% zcST_F$;P9;(Kw))k>S?-S#slU-#I*H)+D>N_AqEg)umDKX%%UTr4S+^w7X3t^Qi<| zhz2|bQL;cUSm30+WT2mkFwR;}XVEcU$GbLTM;&Y!KI>%G&h#x8zc&^QyOc$9{!Ol4 z@^|_F$=gX(n^)RS*1bt#8K^^MFzNBY_o>78r4GT#C#gYdpjK)y%6#vCO#gVAglcz6 zY3=<@U!ju?jPj!WG*km~`J`N%9cqie(BeNSAH|i6|46laM*ga|5BLUln(n`6dwZPV z5X%~!)k+naMgEssPdaivP)zX-St|v!DSsq6G*TB(bY=lbJ=>K6n<}Tmy|pcCr^;@n zZH;Px;G3(qYflV}+_Dlc!Weczw}?96 z;-NPz#Qm4<$NEZ%JT8pV?N`lbX|iR*eW!2?3zifZCHu7wNIx=zEIcgG%*kreUtEzd z-h?Dr=07!T)pr6Ze|u3$dwsytBh0vvppJ?iB-uX6`I+uBWy!YkyJk_+#4%Xk3qjwkiz^E29U;u>Xd#m?9 zfljoZh;?pQeZozVOMVe_wLK~Dk+tj|@JgAy53Op?R=m5t>Hhm&!&YUms#QKw%bH+K z0vkt5<;)c8G{SqawPP>*kc;pV9CSTjbXrxT8E5;GSzDEhnn5GX#RyCb{B zJK-IL?Mb<|Fn)#Xc#umXuI2+tG7g!XXm0oG7jIO6UaRxD|*yxit63zPh^ zZwi1mKNL4+sJ;TnAh3iL;fdM%RwS5*+2yv)a-)N;Z(KW7`k3*?zqhc_Z>%-cu2BV$ z%zDYMz>XOkAIz0LHZ7RYlr2+eIdz7)O?%5NuIvp ziZQpN%}bNmhB~(Em?dcc6{Z{4qVfCw5-{Sr$mzXQ@UK2$uMlrN1=I^erz@x z{K92k&?NTUhPSfgEB2*rH@DkwbrO$NW>GS=F~()7(wvWQC2rO2$oHh|GtiBKD8s1C zfxPR_SB?U@{RCW%%f)7^?a|ak0n&1XWPe3ebOUc;Fy z%5$ZeSnGB+S?hLIQ45Gbd02Eq5xm@7n6z?4R!h6<0V$I9%pT!Kf=LgcwS}sTn`q=o z%;w=iqy%%C%;VlVG}-M28V5PU{98IonsqcX%%1N)5fC?0LK!K+`&_&JDOc`cpPQEi zYEJGtn7wJqUht+Vr=-@!{2L+Qf)K@}1`B%3sp8NSnplRXAeC<{*`wI6z!|_}WFb)- z3yGE-j=YJ=cCjA{jW!}VTE}W>q zCE3Z|!xy*sw>b6wKRDy3?eA>)pE>YWwlFF-8Qsd{*kedS28g4vLPpc|{AChniVE0$ zo2ZPa7HrKh8piX;T$;eFsDE=(@ZO~0eXR2$Rv*okK#9$@7D>|2#c?orS4id9^~tbfXm3;r z7Br;_XjFRN`zSKP%3u~FSDOl1UlDqT$pq0i83ZetGCzht!YbIFReD+2j@C%hY63@z zGP_!^13x_PbK{k5yY{omWnohA2X1Rl#_Bk|x5LP3!JmBNZ`dL8qL;oaH9LZq&yZ1? z+8oi^Zy6Nb_*I7xaIq4F`A+(0yZ&W{haESkCGliGo}yWpd@-9c#z;wtzTXMz)d#O) z^k%#|qggH6yGBs^KO4=fai`-qmnKDCMc6;I?X@&tEOhW@29U!Vwl>8xnB2hi4f3{- z-1`nke>2Q#pE8(9C0i=Go)(y!7%b;?WmX|(Z#RNJq-xTr{2z=CE`Lngmdi}Q;5{m= zBy1O8b2UcKZsCB8qQ4QG>oQw+MY8{4JopTWthAI@;CQJ}>}Mdxd*c5S;o|YlubgjV@S{?2W}*rH5LN#YAotB548O6{m+w-3k)b zkca&_+Rgoo-|Mq(vP^QxVc|&kcIPoc>S~0s4vxkl$MgLQG# zlz%J=o)~IdtITAZcU<7RGFlT1U3Xg}mv`BDj;-1yu zL7%7T^Yi+gsLvVtyk4Il*5@RBzC)iY^|@4^pV8-6^!agp&Q)jGi%tF!+g_Ur?=fI% z-#^atu=?qp+vpZ@#g=iX-7+zNiKOLomhI9K(UYF-ks;P(CEbE$e?;@26olcwphF5j zNx6JN=!Tw`TqO)}kH_(TXj0IjkYMAs#(h&}LKm>pR>i=}n@yFW*}&F!~m?UYuS z9a=Kac=edSd$dpDGOp~LRO6wKq;(uJ-%8(iaXUS+^-?l4!Gd@)tL964#9qAL_o0E$ z32VuR2D;gAp*!+Ro=Z9VZ#TC{Im#Yoq`vGH)W_4mqCe_1L%TwJA;6W&MHjac;u3?J zFbv=O2;U1h&Nl@*1!mY`3`j!v_*4>vo_D+dmHjT8cD+;k9YztZTKRH?i{kJU4ubIr zdH4)-EzaLdAUX_qHVXTh5CNxfchv#Z8=$ zb+eF;S7e?t+skC_f%Fx;Y)hnp_f2M=AZN%?Fq*czJ%jioDexru7}A7Us$@# zm#y2+e`l7zEjhdh)*%3SS5g+$Q33jul=Nd4zek-{#`xGOZ`K0HP@xORrHU@N86O(^ zYcjqjY|Gl3ecYQE_;r)8(DjB{{Dx~%3Ff?E?lN0rjS=%* z*AlK=5?^~CAFoJU?1kn;{Eeja){A$UhB@CADLFdjTnVasFAKGlo>tV<{zZjGGqD?3 zqeR#qn37}eLY3D&B|QF9NB1Yr_p)|pzX64>S`@x-7QgSxgTlG^m@MXTIN5lSJ(0{Q z)>qnn!vk}3%(*K&f7ykUZ-xgeW{X0v;6Z=y8uD;H-Vy0awpO(i=I$X|rDaW%b50(#+>w2zt94t4u zPUpJ5>QMQmT%TIyaNPaC!E!g(Lj^wbVEGuXWgai{^@HW(xfaji*(INrU&nPUc^ykX zEx$poxh!1#Y56>^#mng8x{PbjLwL6C1Lf6R{{{H%KRQ&tgzI=<JF(uen}?t_dC>|3|-HJRl30oDQkC{A6$;ze%M1@kUFpemw}x%Npi# z$`w3PKlv#SinHKp(=hT%xag?xMt+zN^%Iy~8s=LX#>T^|EjEnv6AhE5VTS5wYFx=R zc%0oD#?dS^xEwZ2qK1{Sl4e--iUlT#e*@9u)-bL?V6rrf^G9bdD^J730ORD}KzzR4 z#)Hc)Fa!+MFIpD0HXaQ#5S|7N6FUf=M>ULV5SZU;n7Bd8dS1f}83bmNh8e11Y?(&u z#yc7&eh`=sHO#OtV5maRMVcX4gGh7Nr^{M#I?8#IDIt+D^5G ziG9MtGZ4%w4dVjlT>cGI_eV6$@ZX-jT|A*-5`YnT4J3l1Pxy1rEK7ez4pP=78s?%w%1YBPjwdbt*maMwic)2LPs2C| zftjRXVt_dt4{x;bJau;6m}}!11jeIbVh4e#)i5p%GmsryrD5U*!PBf^h71Dpdkr&m zkg{ITF!6)nY11&n27!4~!<;h+%s({DaA3|Riw`tR!XS7~Xc#vzm+{ZmiRk{6U7gEC zRZek8dv|HQvD!+Wep?MuVLf`*=QKM?vnZ=4Kr*I zm|tp`bNa#9Wl3NDdku3gFjDt{JBfHfKjO`oQ zb!WY;qf^7kS6!m{W7msi%#M#W%*eCA2;L(a=0Xi)=ePBc^`(xOLQ7XKItx8An_y^| zWMBxNpP@e&K;>u+bMaYVMgViAhPg!3)8GEY0y9y=$o^MS_km!hYnT)b(_arI>^Von zi~{CtvZ&B7-#ANIF3PXfFfti45Iq93T*J6^S^Z@SIgST4%w>bXJgQ+X*JauDlKj@s z=~$~_zNzsH1oIaSlhzN9E&mIld839&2PV2dDZ@X#`UA; zY7LYD%wY|arC|nYgU*{RJ-iB-vyBVR(J~<>rny+E< z27#&2F!_oeC$lxD|HQUQyIwZ! zlYsrH#xqmnvE?p{XykV#cz&&6W}Ov})A4%^QwYpJx+-Nor(tgHR~EPGCo+9S!_3w& zHqG`JWHjvGreTWu!Pxb3gY6$0rWhEphgJ!Fmv;_=PWRn1M`K3xkZ)rbq}Z0 zev_cbHQQ(;>z+RTNPhWIFK3;G`DgvWWg%0? z3JvoSFaz~pZeSkNF#iHZXtrs!dHGFX9?>u#p9Llrm|tj^qz4AZGYQ;JX_%3Nz&xj6 zE(GRm{a2fYxo8lW9U3NCmu1H_>^O(e^Pz^h7??!<*)Y-euv^1iG6>A@B1=~vAB3LK z8s=rcB~zQv8SqYiBGYsYGyTD{%l&&Ars5%s&$f+HF>4EtBNvz)Y*ZaEqCZ1b2@XfJ z{>;*N#x$KB&utp!4h>_|EV?0w@bDfDb0;wU_bpTs5{ z(lECT0@I^mZXX2Z!nu}?-3g5Jxi&q~ws)L{2>>%N%}(b;4fC*uvHQ5_dflvHg20F@ z?E0wXLDWg=< z&pHirspg(7FI^NTr{gURa~ljkTYu4^VVX6J%n!?Nh;>r@>C!Mi(l9oEqG7(!Fpp{& zPU;sEg~xG=CHEf>f@ipf`3W#0EgMg?Zd|Nk9@BVinCP;`XqZ3qQ1oXYS!8OMzi1en zhtYlIH5%qQUDiN#pQ2&D0|8Q&4dd>syYprZ^9=r&*h3p8S`Y8mFm`<=kl%fo#WO)A z+fnn`zj8S>|Ljotvp+plF6GJZaH2K$E6?QTK5=lv{F>h#`1E?~-unB$*7xZ9ToT$| zXAYlxyF3|}%e5TxLPia%yJmfy`|_VJem$S0|M⁡6P=?f_oPJ+qkT&uPm*sbj-hD z@%-7Idn)R@p4z<1lDaxioyIl2%ImquQ|qo??5QoQtX|@-sB(|t;gph!N>8cVTkS5X ztgK#G;`O)}c@|aIE_0Vv*8<^A8&g^8_EdTnd8)j1?&>nP+%H(>_0+jNB@4^b!9T0o zT~|}G(4(?kUR+yJRafSzo#Lxn=&h)(y4>w8xd*6vr4hgQx%`~Dj-FLhNhGa)zK~d4 za*tciV@f&d+zYE0)zo_G>d5b|^VQT;*LvL*b?&NaFORCqD(>;sdP*s{%Hx=E+bxd5 zl7;t9uJG15ipzafrJmZNg(X#vS)O^tjvERKraEq_EFD+pT~_IFtJ}Q1>BYtF*)s|p zy;tA4MPE;?t@hQpuRiT=ykmONP3{{ePoL_@_mow_BgdrD>IEMArm$jZN$rg4dmKem zr}v$%8V_kRCrPCoTP8aktMbPE<=jcn?kvf_^gG9M-DXF}ty0*ewzQ|o#jTnR}Hjm(aY4sv^$-;#&kG#T5{(Gtx zR+m;(-DC5xVo{AHQJ6>pQMl_CmLqES7~g-FtqvAfR>1!{Z*4`5!;2dAl~?NdKPqqV zY<+r$w$^GbKV4Ha@#w+yDN}kI!cF-F!c#|HNtN)b7X4oA893v$ikmiaxFd+>RGp5h zrq1IltsW;R;qUj|)2kMjR92M2F*MzM`Ix%P-Dy!mp?NJ>Msd_G-7#Mf&YkM#qk!$7aWo% zM|7H`yRt19ftO=n)G?>(-m2;)G>qyhD6J|jsiol~H}{f?Qg69?OlgKRE)0a%T_)l@ z1Fq6jbM3L6~xszs3pEP+!!Bx7RvwW46a7sjEBXFl_ zlo{^6?24l`SYZoxOli79Qzd$`prWb-Gh4mj->AIekI<*+mFCxr*|MJZO+Qec&oQ6l z363C#q{$JTCh5;{2#mnXu{r7}sI8^WWghRsa$z_sN9khj6^)LwKBlSPE4o-zQdQvv zy4Q5{=ofVl?ma6kvVN`*lHCk(R>l)*;aO<|b2(wnUOnMlr-7P6s z`iumrozM%MYSKP2R`*7cOaE8vDJdOST~$e6C+eQx%L_E4*Rpz+qEL=BUqzMod*joq zJWIV)`Rc1CPSls0Wg_*{8LBE^nGd<_#jZ4ZQt9H7s)e4uM9VHjDY_8PuXy&H0>_j| zGl~inyOevW)b#c-SC!uB9`oHwUxu4Y`%mx1cWFdp)So)ZG(ekCXzJW0wY4S7tp1nc zRVC;Ft#(pTRaR|_R8a_ouV#w0A=;Gq6tz_)m2QtHRfgMV*%u{^%%x+Ns+ua`Tj;Hd zl@~Br9{dsES8on65{fX)K-t0r<;@GwYmR3*S~zxbe9R%~4xW$TkTf~2;5wH>^2t%e zkx9CwDaPtQwjUb9z4*#<43sA6@%lL@^^<%1&`D>UY+Q1-%aA;FdUV?VNf~M2`WDBx zIV8TD$ssts0UP{vBkj_MGnEjI%KEA^don}9?&oai9xg;5@xH(ceMsY~`XpYM` zBu$Pn99MAIKg_D*n;g+;_A~n|<1LwMmzbc8Q6zRDbLNshf`dINRhp#B+!~vs_Ws!M z$HA7Ur=|5i)EB~E;kEEq#*xw%VmTyT;w3{lBux&9_1JMdu5HSXxtEhwEBgfo4ycFg3|pmmO$YP{7r<-k=e%u{`~xXM#X#Fm4wqHM0GR#F`K zc&k#{O|=#G(BV|}CggMPt+)>tN8CRgY214-Dc71p$ZETVo>FnG3q7^?xt>Z#QMu1c zyI17Ql@8o7sRoyUT3L6KDXH8`?_X!#+tr&~QKD03mMlFz3tobBg85ilv5JnF9txnI zGx3=mGXz~xwXc>3Qy9~fJEkyBshpvF5r@t?30v-%S#qzZc2+g+`J6h&Kh=w5%pwp) zo`s6zeV4uL=u7Hjh$^L~VyVr;yz0to>dOenp;$04ABG|uc%<%c?Yp1tk>Nop; zWGsb-*r=2|ZYjq-np^_4@Ix`Jr1G}v>P4cO)zPwF0T3oTvqkE=&Pu)UB8>)U<^0v}gZuIm; zCHHt>2MnH`FD#LsU6sffF#1*j-XealLtSch(wbgWA_Jt}7N8_uUX4HLkp`#wFovgI zi`L@uT2Ebhd3B|XupD`w%1R5bTxqm0q4K6$n2E!`&?joC`ZiT^be%+l9l~XrnGCCL zDl4n=Fswyg$)j1LXzOc_v#XcLje@swO=fhSC+=yTV`fE_RTrx*((i&;X$ZtcB7r9C#Savep%RJ;o`RVljC)98deU+rR#qn{$Hk}T7x zTHa~7`$rcXMb%~AB_*|}qPBF7Nwr>a*``(3dBueJ&}fHJ+QMp_I7eY^#UdQbslo61N)qwO(YaS8p27kb2xqLI-GEa}wI6hr~1RM$eHqo|)0i~5N%udm0ZCzg>`rP(5X3R9ehE0Hi>2os=fZs}gLfO2TXpksNH5XL2PW7R5!!yqPm3 z-a`Fmin$OlcweGgnbznUh!M`@d*n(bPGQg#)!yXRW+y&1c0pIR*t)x=wxmWHLLIgW zZ}Xj~ufr7M4pV zKE1Fw&rv9ixvspr#!)bD`V=H)iPJGXFV9UkEJnjIwXmq~!IYAvvpowJ7naaLLlVu% zw_s9fDGguU$up}@FIk$u5b=4dXNd%qrKqNRELl)dNk86)Fn`umyL;hsGWEoO6jhn6UAanuc4Gz?Dve4Wz{|}U1pW1q_*NdWiX0M7El`{zZsszp32#t z8czv*?V_l(sLOm$rMF~S|Ae_#3sMLq2v*{&^b%wf#0>Lq_CcF>nU$cQ=G9i$SiP(b zFDXS-!ES3J!K~<;s~D|`)bhZ#!0HHi-aqLol(N*PLW`CbWc5$D$}tH~r}`edlbTdl zguG{YeBxC(tUIO3^KNxaE~)dN`X0NB>rI$dT|v)mKkn;~CYLPp)J_$JE27QVytZxB zjEY61Su_{n!<1BNCl6h(Q(mKGcP3Z*YG;>}R`}|m)mt&C66XjDu6>&FlG5rWnwztx zVjvb{+oX;4xj027jNzA2QZK8fS62EK;o?7gw1-Y-p+ zItgws_Dr&Tth#$WrE&@7im$X8yUADyg|!}?V95t>qL!L@qX2cv8IaPCSzWL4T5vt4 zR#q=4sZ{MwoWeS>t{S^CI5b7O^gI>fv^<*x(C z6&^KxnlxSdUHVkrfhyZYv%)|R_|tJa2_+D_t06XE#V3k9o_novu@1&!Cf#Cx`a%$D zKySw<1VO*&IwbQyjk#pFz2$_+`Cn5D&lV8YkRW7$Q!Z^ZW;!ZeJ`1Fk8p!>?K z%uFIKgV2O#S@D$rKj^*BQ(LWq1#nG8q3DRCquDYxIeT$xbalBBS6>HwxgLs1MyY+N zC=IQ`aQbg#}(<>@k*&E9) zCyWbXf?%qj_Ud@2n=Z$#diCgB{bP4FOH{;K7h#3(Zt|%Zs-6iFSx3_)v4lR_POq@y zn7iVhs%jZHSa1W^|8&Uzh8L#;pH}|qyy*|9_27SlPp4z}AM@<=Y>q)W*bnx{KOja` zbD%tr!_DE~=&B~h#ql$a=XqYkF@@us91f0mfq9OjnM34wU8W<=yGX9)d(%rX@;Y%g zvLnh^zz}QMBo*mnVrkid^4~8d7RLFna@NUrM9VXh#q#vx}H#~+p- zD8Gs$mP687?mtkzg5v^?H}A93B;7t%l6DQp@%jVhD>>x+J&twy`qNcb+8;SD;D~Cv zRd@x;0Mv=O){VZg;XrvS$JbFu0oTK#?xUZ{^+rFu<#?^>K=~RDIiGsSI?MHBoz@nW zCh7f;AM$)M$MoQV@=G}6EQk59b>61Wk~Smi+J>{wLwNS*z=87H9z9T=$|2`HKRQsp zn#0BMPP3KvDCe6vK77Qw|CK%qyd1N*AIibpY^kTLg7E;oo7scD=Km${%)DijSr)iDCbL?0pAdR8{u(g@h0wD63#E4h8MI*1oRg`<;8=n|U)SB9m{2 z{4)dR-S=)U=bm%!J?GvGScixL0D35t9aYxkH!O`+U)%1%FWKb0S{fV*}3uZ&CV{s@t19OP67lk zMfu3{rUy1VzXCMf7l9glU-e+*TOCI4We9tH{buL9J2pH2db@D%fqMcV1AgDgeiGgp z-j4v}0bH^_r6YJ{9dxh#L{1Bmw-VATDQvA9Pbr{>>B{C-k}$Bxw+gk=IQmeV;@4`fFz`o z0$Z)Gqxm0MG)Oj*%t(xvGOG&=A*`RnmNGX`YFI~{P$)sM&B9&Y=HwA%&%J+2< zU$JZ;`OfC?dX{&3Ljh^P)UtZF-Q|*|TBJE;)iqU>Epw`?nbb8!;6X|DTS6RMD39X^gc*UCEY!-dMG_;GgsLpids5RvQ8JwgSgaudZ0BipDbi}K}tNRH?qK7HjCGz3dwNE5TN`89b3)`djG6cLC9C^M8Dn@N~> z^eaCNmIvAhC7@l=jVZb!j)`3C#Wrq~=8;ge0aQpRz_4)Q`x47pRUin23p!#(5c(BP zgc_jHBN`ORI3iC|mZB``@g_36;nAp=Z~+x$Pa`x$;rQXezR_tmiJ!dx#Ep)y0fj+3 zs`HpUvQcS)h(FbW2R046U7ev$iO)aU+ZLN4j_x*Slu_yM+FLPVp~V3WFQbQ;V`fcv zkw*NQYZxaUR*NQ2!?^g1P@Nn~mTb9JsunCII|4JP&=#0Zk{ga}P$EYylf%JENoZmj zGz^`-Ac^t3jk5UfCe;a6F<942nr?J3|AE3v-0aoW7HMprY@q|qdoVX_2-)fY%F@P( zJi;P(rWioELjhqQMLcSNxIP>4Kn zBNJiIr67_}hpBoQTkT6@;&7~Vq9^zk>wxxPyq}ce>1)2$PsWk4<$-BHe;U*Judp`*`2I`mdjQS>)B~miHvN0Ea~;43 z*tBi4^A>;)AOR>H!KN)(3jtPd-s}{85b|O65k-vZp!vc$8yuE63QcC&Dq8HZqw=yT zFon`OpZ0{g28uQS^3?MQ$}32bLez`0adqZy6hGKDyy$slI^4$xn)B?UUDo7b*8689=2}aNze6JU}FsOg|wkyR| zmnVn`@7nM5D*@x2Iw8}p+2Li3(24~?A>JR zsBX98f042uNAU*w^_!k^3s{*59huENNJfLD=N22#l!@g1#>516wbMTCK)-%dDN6cw z`3S&3iQ(UGdLgS~7{GD|X&YtRe|jf2>La?Oe&d7%)j=vZQ2sTL4+-QE>^J{P;-7s( zV2UIcxCy6eww1xgzYZP*{r)(A4|V!Fp|t{k_efT79Q!~8L$?x25=?d zQow4!`BS$z&jFkP=mD$%bOV9_A0Xfp%$a0h`G^9Pxsd(Q4yg-D8|nyDoF8@IOF}Zb z&gv%llL?VWGE2oQ=*YEVdl5cVy8^?kESQ>mtk!~TCW_#V2K~pW0y1B6NL6)n2FqI= zv4(+QI3&3^ENGEMn-g@Z{|xwco_b`duK3OI!|o5%9hSHX3Sd<&6kx3mu2#an0O_H~ zUI7?EVqMG;h3x)|6#aoRW?Q#7i!EE6ADOl|PXkNf)8*o96rys=ugpMIU5(_k z+4&ciCGL%S0xE1TLDKK%m;D4rN1}<9CBC&Hs*sy6Q>ur_{tcW ztdgLCCU=70i$hVAJx!Lj+yLxRU9cGMuA5}JbiR;!-x|b_N_Qgh7$wz zi?%q=T)4%#0r2*MEzT~$_sy8Y01AtRdGP-gd?vmN;=`yFoqUp_?MfRWmDdkeeIm@! zP3Sid!*9vMKz2cTK_uyL8NLiM$)wjR!V_9-D{*v{{G*Xf>Km!gRAE{XCZ~z1X;1H_ z?cd|?)Nr&mD25AYKtI1s7(dgQT(WXKJ=%X21;MqEz+Y& z#2%>nFe7o(!9Sw4_~iJ>DhS*0#aW^XMb&Yr9{vAN0o6}AH%wk<$mK^)?}~_eRs8dm zIu6i|a9D|b)WAQHoCn8dD-)%bHcSHC-sLgnsz?g*RJ~*{89wB=mZU;_oOkhr& z=a|6UIKeRib=V8fEX17v*ay#jaGE27y^OOP8SE9DFv(zlVh7;)Do&SVAnieTy3o=L zb{v!NT*{{6`39SY=bJcHlEL1>nUf6mHcp*nuy=6AB!j(+lQ0=5F$>R5oPx<<@8eud z2KxY9K7%#kd`t#w#)+5=wgC5{Ww3=f{gT1#*tW=E4xEn3U=276lffF99?$8_fM+4g z$FqnP;5idt8OXf|&qb^l&m)-;&qJ9B&m3mPb1}2v+0LwZc3_moqmN4Q{vzwa^Ci}c z=TRU687QL^PXp`0GoSU2nuwaS(GyYgQalf1J$N3@dhx8m08V7{St*`=)`Mq&_2LON zQR+k%Vx@R4V?B6wv0gl(njbR}ttiE_iS^*w%zE)$41zNerI+GqXFYg2SZ~?{j2as| z0re`yb0X^*n}Jd6#dA*_fyuxqmf|^u_29V|>&0_##>Qn}v`XTze2>R79r%=nX9k`rXh9l!l~UxR@6&(*lkhwg_&F9MxCfrpvayIi8PC1Z zGNRFY;hBoBu^8Wd@H`awITrEu!*e?Db1ZxhK$_8LG1c!NJoiJ3(-9`&xd-qw9r35( zIT`qwj(n%%xfk#=9r@0{GYjRX1241ioCP->rOd)J2W~p>G6&C8xYWKpJjVk+scjlO z8-Snb7*iddO~9RWjHv<7>1bs-$|%5d5%4n|I9Y_}V&G>w#@dMIVZhIH;F1|n9q=<9 z>8*GgfS+Sf|57~n0Dh*Sp1o)(D8{ICR}e27acYw|nq@&Ho%fkG^nPDPwz804ez|gARq^mkxGKG&mg(qQ~@&|12E> z0?AYAaFQ9q;RvKNWa{wP^mGnQ9Uhe)M4x1Pb$D$0LCZ(x#5V>@KWOFY%6@E#moQD{(^YQ9|HQH(D|R_{}}x^@NWpleOehxPs++Mkoi@kja7<0(H*{?FGR*ll zRfr1zU+TX&{|5u#Y5W_4@lWXdN8yv=>Hm1;KWcnD<;OYy$D{nxc*-Aw@lWXdPx604 zzmYrtG5$&Ye`3c!q4OW~Z$#_=A$;_X@cn;WVG|eqi%b4P|4)mj{CN34h+hxMFfjH? zl>Jvi=YNv_6Z=o-_>%~{)A$!B{--CJ|6~5so&Sky|9G1J=);{Zf4Iy4=zl4m{*QP4 zw+rb1dqz0_wfq%2&DL+p7NAn*>`6GA!C;2}RAhF{=qWOP<_5XbSL+~HT{2za) zGOqT=wf;*q{|Eo+MFSE!{t2D`Xg}SZ6Hoi&8h?~OBcAeyg8yUfA5Z(^wf{)2|KsTY zIL9BT$A5_&|AfweOx}d<{{#7P4teM2U!3Dl=YQyL4<>T_6FUD;H7npXB-f5zPNd_!`Ok|7d^m{C|A- zpIrYB-hU9$qU6h6$^MsQPx{5P{)u<|NAmig&foOL)Bo|x|FrpmJQ6wn30?oA|8cKd zTwk3qNI(B?Oyu~Z{}XxspWFY8Wc?o|Z}R@1_~>7f{}0}OgUWviUjOs?Ka%x- z;Q#ouqa&C9qy0Ugfr*s=5-R_r{ke%8f0UmYPxIIjVBxSk$V0I{hu9A{||Tjf3&{`GH4>lKcV~|g(uJdCwBZ3 zy8oA4|0nr>BI$pE*Z)cVfAai4{Q-*+%l{$&(BD&wr~PrQ|4{xR@suC0{EzZWlk5M) zjemmee>wAy2mi4C0SgdGh{~5{W|H=M_{@__6`TwEu;9tD_ANzkj$@Bk-8~+5)f1n=!#e@Gz z{y#YV7*zgA^!gw44}T9cF8q&o{1eUpOX6(*u;%~7|1f|fcK)ONvlBV~D1T-=<;ThY zN&ct5P@Kr|Pw4!|hnqBToCrB>x|L{$Plr=2xu!J5V4h{C{cx zjiUK)#LoXj^M4Hf0T_Xu?*BOFKgs{*c*-9F`k!e2pA~2OhduuX0pDr-8-npqsQjPQ z|FhCK@juD`2cJJl{vX{xvGPws=YOL4f1=m_==`MqKN>%Oll%?-H{AJu??~4FL;lsp z$^YUSf0REhp7P_A|LOkEUc%v#djA&&FKPdu*zq6H{2%jwzeLY}(2x;3|IzF0{&l`JpUgT{fkTfOP>Fy<3~H+|8e4fItDMH_x~n% z{ZI0L=}7+jAE3Y1c<^ty^MACz7jqzy@?S#dKiZ#{$ni({GvX;fPWs2^Ki2+<9RGys z|B~x}U|(X#KcVwK(fl9CpFIB`2mZxL|I*R_BmMk;Z&Lps7yknZ88kgmG%7qw|4GCz zCj2+)pW?*-@hHDEp7J68CiVZ(;~P7EgN}cK*Z;}$|08?-pS=Hngx~*9i?5Na|3~|i z=l=)iUtsYA%P&d(KdkM4Ftq%a$o-#@y#A;2H@z5vo$mj5<$v1$M;<#}{&1iF=>LP` z>3_68uJvDn<$t>Wf25!PHzsoY(f^4&|Ih9JMza1dx&IIBPb~c($^1Xj=l}WqAIbVZ z@PBQb_&==qKic1e1|(AcOX&PZ`*RaH{wO~)p7P_B|51J~Hmnml{i^@y|G4Bo zB7X7UU!43essB&%|G4lk$^YZq{{`*cJ%RH-ssA70`hW0$Lf}Noe+iZU(SChA^Dkcc z59J>cPxr;~|8dEG3D*As_4seZ&i`Ft{l7m(V5j>(&iPO0pH1l&7(*KX-^Z#Uj!{X$Bag9I9KQtcvi*x>S{a^C@|IX9jc;&w&|4*L( zPvHC~{$ChR`Tqy_e@UF}kBj~%c>Yfy{x_2M|Iz;0i5!2FKQo^4*fh1Q^IQ@MaijV)?g{c{L5yZpk{B5{=c+!4&xO_~mne>hPXr7M4 zcPTPZmrwkY>PPc%EFQF;rTUc0{xrn~EFba7{x@7c(nYl&;Upi2+mCOumkpPXZ_?j| z+mCP3CsKV$uTS-%_2q!&BOb{gO8Mi^$-SrpeZ%4D4<#4zeg~I_BP?7#{8627`)Pc7 zDc)~rKiMBD<^SgKNBe01T-|=Mrw@-m!s&ih%D><7M>ws&!sX+e^bz!}v_D(UkB>j~ z4-l2Y(Nx|)bbe1g{`B`;cewq)H{$={@=<8i_#>R|XAX})m9NG>)HhQuuZQ9x{=Vd* zay0%NUuAshxBZBx9)C(te~%&DetgsUu<-cfn+81Gex#3Q{AvH6&i@bCe&nC%`JW}X zUm1V8uQJ?z)IE0o)8Dh+;qk}#(fxk|wjbg2_i@AHk8c(;{?q01dMF;k>F;SO<4@o8 zqx^Sd{AqrdqR%P5g8w;`9)8OFFGWDO{c(;z)sO!E^?>dFwed&#X-Kc0|Md41sJ@*3 zBb@Hn9I*We*Qm?KH~l>_b^B+@`Gv%^(!{ZP9`Azd5h4jRX z{|vdj9x5OC#m@hpU3mVZ%KW#}y9WXQGBAPjdMWgIubX zzxtW~$@Tw^kNftHwW+Kdkvbn0qPOuq)61EcN`S^|5;V`lY7|;4oaQ|I<{*N^NpIrY7e8e(`@8@O5(EsH6U-S>AK9`H*ng3+} zR|=jwocMoo{XcZ$KOFb}lk5MX8~-H#PwM}N+x~xY{XcZ`pZI?-*3iR=|0mb~LpT1z zk^d*x|3f$aN&dg<@&DxdU*LCg{f~YCZ~p&n|3~NlhZFx#uK$OQ{trj~pIrYB-S{W@ z|E|aXdu96`h5yCc|MjZ%UvcVxlKTJOX#b17^8ai4|K6nje_;6seUr5R2fqO^0_yiY z|AqcZ+W!lCiyrh((*B>ZLHp8rd(|Al<3$UjN_zrZJc{tIh$GWenO`cUcr zdz1SAU5fwrVqj@}75q=y{|o$A&i^IX|3f$bljr}F>;I(wU(Ba|&%c4+CeQz)e+F9r zp@05=pZ`tT{|o+?JpYe%He}VL{(tEBKUNd`w=3)aW}=28>HJ@E{V(uaS^p&0|0?=F z)a!p7_Af=AyYl>x<^M_jzZkEf*#AlD|9_+Y5BiRtnDf6gz@G-Y|D$IYzW+mT|6P0j zk2L;It}|0Mt4_4fah>wkgY z1Mz>RwtocgO5Xp6{z7M=D}M9+U!4CZ_5TCQKj_r|wf$dG{~ta7WAFd%iJAWr@Ls`x zl4p|l|BC&HQn_CSyZ;_h_-|L1|C8%~;5Rn=6#ZYX8vo%R&;2h+`~Tm#{|8?Af6e}% z1czOD{%3(gh4p`=|4rWi$H!}=?*Av(|6;xl#rVtYf0v&BBaQzj*Z%^)lk0!<19bDr z^Z(KOKdJv8I{H5x_y3dY|DhZIB>&&__WzUme}Ufv@&Ba$f9U2v?f=uk?&SJ^fWLo~ zfc^hcEbM4J6#S1p|5u6t3LlE~-*Dvr$@TxxjenB=?|S?{x&Du)f7w7%_5LqY>pwuB zllp)34|oE)VyE=~3<|>G#Q&4)e=%MomH#K#|3f$a8Q5Q>UkWLa@f!o(8oestqv=qz z>N_+(|*-2Su?KK`jAeEdsK-r^*v z0n7tb0*V2fPTJyp8?g3N0e8V&2e=t<6`&N54_I=xfXB{49(b>Z+YI;fGq*S&1hlUb zaR16J&L+GU!951<^XG1Ht^)L2Dd4~>wm3a_|N62m&MvqwUAo1Y3+TO8z<<}EK6pPF z?yYb~!M*z$ly#$kzzs-`_m9?Yahl;)!~NU!$otP*oE3nDfGL2lU+w!{>y-jNTbn~_ z_xhzk(C_j|t)cdIho41-1YK^263`KBq9N-gc?e(dqRs z7vbfupxxmMI<*B&-Xb|#RLzd8Xsz()S{vq;OKn~cst|B_J!lEl48N$jKBqV6?R22_ zZR*HDTdSKQN5w6lu~6!?`Ft)JIc*+0Mum50KTq7aOp3`rM8Ho9_w)s4^ah!|t$SP|%VN)+j<}`&``)H}z5f`Jy+2u8xp56p-w; zpiM3yV9B)SNGKV(;g!E(i~_SouJB?N)M%*<)$=&qfdTWU5#x1N7`kkQwb=fk9sCZ1A(6WAGNoWXKRPVNVY<_e|J30h7 zA6-Vwculi;kcLDK-|;{7eSkHe*RC*Wj2)i+z51ps<)l3jWy*em8+@mJij2*{2_P=%)tICZ8=35Pj8O8jd8bAcihKumyC?CTL>b0A&$* zQ;Oom(-$d?mp2;}V1P2^v`UddFQ#lekqp0wh-o{@rrPH*8dQvCjjgpJOyIaDCw(fv z@{r4IpKtR;(M+cJ3Q9|Oul!cI>q^gh>Di}x=Kb>I$p>~n^_;Z5^kI({ zU{@Yf(56wYlw4O0@jFUi<7#E?ep?&0+2)qQb+^0l>IWHS3|z(SYU8~k^Hkmpx6R+- zK#jbi4kvGk&F$t?DUWAd>1gxX9Sydw-<&>2@_9iR!Q`YssFn8(H5tqy+gzS@Zyx%%GtU)hv7?frx4nKgATEHW z@)o0k-Y$9AsPB*`@sfInUvQH_;_;EC`5`$St`28VQsz--$Q^WHD$xuA(T&9Ga@oNl z2Z%(13eAn3tGUAx|)-mRxiI5omJ>&K#XKjEn7*wPm?T?Fw7^oA57eE?Z&Xbp5gn|8=!qB@Wd>j*cPYRJ#iQ&pRT?pKI)M-aB|D0D+A-7>V3}>s{<0pd>T-INtLjr#4f@G1 zM{>KCI*50pi$lI(|9t}1DtK%JiwExVZ*sOe2^PulugLxsR5dnM*VS@DpL=dNv)VsOBs30adn4$O-Qer4~>qt z0mIlY?@_XPzeBDxeep(Ad8k%AAwpGOGBrgT`uiP)&AOj{`RNyV8;6mtJOKojQ9n=q z(n)DX@f|&S6TgYd3;f4T5phNj7za89IZnzB#0h6DzmR<64lRRt6QGgNsKpwh^+Bw( zK?x+QMe^{)7#2&lAlkABz=?+q+!kUhapf$~LO)1)b%DVyiTK$pXh%Nw7WK*&Mb*!% zYpR=H)zna3(Na@4w}$e?T;*aCCxQ@wuvF&s5ArjFCR*VM!J3E#tzkr(@ZLb<+-mqr zLBGutaI0k(q76$u5W1o=$rQqvyckkQqL2fX_zoI&Ld=09x3y)W`P50O4%DE3cdXsb z3uq|hs;eqN3k%f}+T-%2| zMGu3Qc_0mftNUFvxzxkxiV~ldKI+>R6Be}nwlN|Wdp)4XBxq!Uufy@%y7*wBjr|i2 zDy43&&LFK=0SUH0(jsC+XiKTum~?fAan+%{?zOEr?x;Q zA0kXm1<6NSKqRb@@BfGxvEOQvBVsIo*Bnk)6%r_#BV$e_CdZsk$ZvcK$m9uqw~tH{ zXb+u!YT9zzzJj*wJ4l?>avYJm@3ZBaldP%mHr%k>n#NLD%8D-QSST#5mj$fja3XHe zMaNsmNb6qgOjh#3LhIh_8fNZmIX zbF30OWR%TYZk@&|Mmg`bTBkFI?4CQS{Xa(Q40iXZ)is6IEcWK8qwm&RXR-f|N}sB+ z=CI7s!aZX2+I2bBJa&@o-Z|RPGt;VN?~Tp~OtTu;_!QwSS_uzCaRWVdqCqxDx=JnU}S-T!yu`&`-m?sqqQu*wo(jy;6C zQFagCQ+z+U=W5+)mM*59EZlXnd+-$TefgB`V~?|}U=#Ne?zyr%W^eI*>fX1$U2i#+ z{Up05?<2l{k=>qs#rLTF_IR?;auz#HcGLG4-xtX4`~dZ<%#ccvo}7xr}++cpX?r`5#M99KRo=3>27wf z>>jOqBK0=Yy=t*Fx|nj3#a|K%6Kz- zv+#u5HyW>HT}8WnV=`XOCKtbd-kZh?*&W3%U2uN!Ijq=dd-|v1Q`ytTl^3rzp2*5g z*SvhAF~I&{y5pg1jGatlKIil^j2-M+^Xv~1m!(?HeeK%fBbmeUbn`)`2KJ=o@!gtD zHEfb~<6}*xDt5Hhc;DG3E4#s3<#@(a$o^^#zCOu3o9$In`q820ELK&*3RjsAW}PKx zZg|=}g`J0eCq}^jyXX3nQU7hDcWfQZH}|koCW)}p@+A(_)6cCmQ@rc;edN-2>pv>l z&pqW2XMOo{N#Tdf?|A&J*`b*aI*Z8+vekpmZI%D*qXWv>vzIM~SCCfjbff#>!>NN_!=1aLAXO#r* zG?mlRAxus=P?iZ8S+}-)X@o02i73yMzR}uN&bpBO8 z{_@MVl3)058{+qtA{=QZ0ebN6gIij9(ahsM%fGZ4->>raB5Bl*%daPNL4L&>#7u~@ zTu#K+Tpw8$Y`=wscH+*xkV%@D4;;==Va%gb>+*4InJCQCE~^=Ucm;4x^A;BYV!_ z9AgU;YcWM?#X{HX_0c9VL_1!8QAbl$4f~PjRSk%i>BY7iV|8wOZXmcETNu=Esw>1c zSz_mV*<3OWOXd_wEkZ?$SaJ@cZdifjTG4XoSaG)trQ`QGMv+QD>a}<@7NULJCU({ zOp7zJGX#++=A5uJ}7K6oGfA&^qFJJ>;6X4l%BCs9brT9Kg<);o;ziSZJW7RN^*}{jf zrM!90oT>(V7v$&b3s_bNYpVi7Ho~Kao%BR}?D;&2MhE1FbryE_sWpsMI{2n0Ct{=x z4MMj?JLpg^OWyGO?Sm1Wn9SIYcROs*S}9W+3+_RXh;j$jbhR&+mN`6j;5JBDmmi8g z5Ve4}J=lf4QU>aV8d7sqo0;-(5hlxYQfjPg#8#kxDHfxkT)cin)5GBrpD=BeDjTW? zO;dS9Q@`QS>U>px^ZJh;spFh}^NZ?D&~MI+Tpl~=QXBy(?YE0e`2G|IEv!u%xO}0LAX>BI<#PSR0P)FU0=$wG7=8Ba75y;+e^YrXJdwmM zHb);Hblr{?(c%_wdwakUB>YkKY-HRCF89%nd^8Rz<_5gY;4Wl>pp0oOJ>eyyzUuHO zS|UeKhey#6IXvsqtxke(FB9%}@;iMG1vFnQ@_CN(lixR863IIYe(}K0){)BWf3~;S zp^f3pOSLb{$u7xW>fI*dlR+nxs47Jr8Fb8sf1{W;P{q}AGm+T56xFK(dW_``NM$OW zh+3n-=ZK<)uzN90sTM*RVRy9Kpska!PdZAMqdNv#0L6r6&@54Yn_x!K`j{OpTb()a zH!%Ywxu!c)i|Be#p1-M&cA#&hEDuJ;=2N;6=bDz!A4b;5&Rz z!M9%Jrw&)YFF{Xr;g$xLmIi`a0QYh?ZTDXXBws-^HK$X`;yhWFv zZ?zO1%E^G3t}WnJEnGDq-iVgZ(ud;~{AyesgM5zJ8A7`uY!CUQ`6zFLQO#Gy))@a_bl&JmgwO?Q+f zV`MKoOtch644jnrsHvURkWp!=!L1#*ildFJFjN>z@|5725#6J_IAj5mq0D+AM|lG+ z=z^m($K<)a9m+_c_qlI?`-(LJAAm>+SO;_EO3U)L);2#@6clUFIJ`O(tDn^lM?b#I zX=_96nj=Dv!|#WYh1j0ASk!tyF7-zC=CPg>qex510d#*+i$<~NQLibvk9uXtJ;H0b zMkvP{p;I9%oq$*~Erf*Xn8!!A8WtkLvjN|+eqv!3lUjI^u}h?6d3C6i9QEl91l8a2 zJ0Zj%Kb})`m7u>At0!637$mj4HXI!dpdiNyLLKhVbvJis7Tg*N}Zy&Hej|wK5NrSFrqDkuLd% zB1-ZPS`qV?n5FRGy${{;XrW)8Bu7k_-E!!BGW4=;d4M<-h%-%&GZt}3kFDgxja-md zC9=25anc8fgN?sYhsklq4G?Dz;w+To(18=ui7PrQ(l61EY_IHcoRk6L%tM?`B_F&` z%M462O64}YM9W%k&Ij`(5B3W^c{Xi<#iA8Dzo>Pfltn@c?Y)KCh|S=DV;!0HwTo>u zH(B_R0ce}Uj!1wIuh7xQH>o zvYKzA@Uy1Z}n{^OUsI(R+AGK#FUh@UA% z44x+BfnuI)xs>=>L1fbs%nt9xQhpXFc397|Tb)au`E^)_c$fAQw;?7ieShCiyd5cH zusEM0&kgMQ6emV>d|RTo{{X(7|tb z6YT>`2TXZOxSQ}!`-~9EY<|cQWDLTMTd}!_vBeex*3dA5=4?J9(dN69GnINjfT<>gk5=b9Jz=m(Ng)Q$B>Li{pdXL>5 z%HeIJ`JnEbsJ-!M;}peyl#zS|qd2l%k(WX?*k4A>GsPx@*i1wzR1{w>f;4z&OUIrE zaVOFzv>h{Bq(S4b`M-GURwqH)wg@!f`>n4bV}7;O`No%+6aU`oWZNN|euKTkv~A7} zGOUHWUiD4>y)oZP+#Pk7A-ytc;e8?!Pce2dRF}_d$fHi8l8p?IA(Wx-15BHz%PXQi zM)vD@P**^Wfpamld5-~8A+%GOt)y6?GP8Ivbrc;Tm&L?b1F`z*MP&`J^oYocs3y4)TC~`_s^walK;|+g<{;%h=vWy?@X}hCNGuy#3#A%y0FTENh&&spP5?OV}@` zphr)sU_YJ$);sWz(*?f+`QJBv{>MX;qbL%Dufkk5r47?Q!M1OU?i1gm?dUg zcD7iPd^TyD^Dlt60j~m{1MrBt=!k#)9pV690Xz+O7(nsl+?1sYZ~-iyn=UKGq6(a& zS)mNf^0u{U$Wn`ZcnzqkB2nKa2!C}G82fB5)EDqJ;8nnLfXDX690lA8SOd5iK>04i zo}@4k4)+1~#u<|sZ{FfoUm&{8-3M%QdI9Z#V*pKns}9`eTn#uIa55kSh;(;U!=sO> zDK^G}D}kcJb{-nePURe39z!Lf`(_@_F`NK%Gf;B7i_Y3%tSR|4tfvSWy#8r1?4ZBH zT{!pS_F}FhA(xGQJ-MK+f>sb#s>|d19wcpeK~Zqr_lP=a3l875i-`!zn>^#eGV%C6);@M=pVlkFd$G{c5-b5IW${ zz(%a$h-CUjI~t-_IjMAh?Oo{1mWBx@n0b@O6Um~dv@bc2AmKMWJnU$ zO(c&>P1t}pf?J?%A&APk5S6`doUQ`p=er3A;;c5;N2&w6w=D$A{vdq00Vkg(ZObA3 z29`2$<^wwY?o4+#3PCB=T;Z^g6b|4Z;NQX{tc7%knCt~Tm>h@FQM)8nGX5Qviuc?Q zkr{`VwLnh&I9yQPw=AV)HQMXpEa5BSL%aP>;%))$s#opjCuZC|O`mU^avehpZ_F0)y?% zZlr@lh?9lmP%a>^1Kp2_L)D!RVO~bL1$4MXLBsjB?tc9n`y_yZACp3A?2`hX;%q9A zNOd?B^`LXVn2VeiK;MjgU|_g>dRFZ#(2QtAE!UY+<#I(&igUa;Psp1tW#+p>2+a>E zFrH-r9RuiFj%p1K!O0v_IW4PZFLa_8jMM>=l&P~*QdoNDcaTpLS&<{UGza2MxOXX@ zTn1X44;n**Ts@~!s^fad09iWZ6Dj0-4X~N^kl@7HT@VWRxri3p72w7RBcU` zOy1H(^J{3;2n|`*qWSgGd`w@G*t5|w$fv>8##g!3^-UF0CH#$&S?*ISUlEC;cswqr z1(<5SK_jBJ6&2vcUg8o1=0;`9C<)_(T3StrO>2I5UL3|kBk~Nun#>R*j*QhRAvC~F z-)?xcGtQUzlY0`g0uMBUz=V%viWMEHi)H;(Jq?=`6(GI>lW-YB^fdBEWfsx!qUqc{ zhQi2doUvCbwmE+;-{zbNw;r$@a3kPt_=z~v*tGFXL*j!bn~`v-!QOz645!?9bvpxn zJ^f+NR&NkD11OOP@{eSKHzhI(k#k0}K|Mtwa%5EwvVV;9z?gpSmrfI)9^e3+1h@=v z2jD5dy8sx{<+=j7T{PL4{LxDDkBJ)*a1@{U3C+hS zp+KP(cE$-RE2NGs%ocoxA4g||XyRl#t8QvmURAA_KJQDX7GMR;0~`lf0XPeA9^g{I z^?*A7s$}6;S|8Dbra7J!-u7yDt43|i0l2<4DF zZHf0E&m;~_5)O))r#=SB3D3Z3bGSVrFXPvp8(*L%w{1#)T)u=`q43n`k|qe;4v6`Z+4DVvrY(Po*l6!S{upmG+PM zNfpW;ER3NG6zfqaL20iJsM>-3*iLXyxqs9Glzdtxtc8{dk#b@j)Q%3nfa}OY7pg!M zN>DN*NIe!p*i01Y!q;+~ou~#ED#qyhPDCBKVB3EcqjYPW9?E-_F`Ho3t zBAR36d?$B2B&;Y6!KL5CPWYWQHkQKM5*$E1x-A2)tN#>CxrpY*#u_MALruf6x# zcfb7)IPjo@rK!^nnVvagW>)sBLvwQTW^1%My&=D#u&CH*GFz-ArDf$6l~r@*&Z|D` z@S6Fxb@fLyG&VIaScub!M;(34u`Nq%t!=Qu>TtS_Tk7ugczws?)|1e(uI}Y0oVeno zlTYb6^|aH^IPvF8AgG)*Stz`H2-jjy|pYkJD~!{bY}e8{W{}@BecA%EMlsb;oi4 z+VASc?;9UG;fJ)d<~%>+*7m>eb@_sK3LaYa?QR#;{yFa+&(?#kJN6^%lPCW?>eRBQ zr`}-u_;(i_@w)cD>SN!Pm|BN}a>bcBY9G^|OtoiNy2SeXX zJb(VHxp#MNIq=$J{$lyVNk65WUh&K!H?{q3&r2HL)c-#4)r3`tzjElEOTXCvnxj52 zJ$~YU$DTd+g_*Z?{A2Gc7QS2faMyRcUs(6r?0dc24!*wSuO&~N@{2gPKzsd|FJk71 z2}5%tI|pm;kcTcYk@r(2e#}#5cmc`4l>|sBo3E<%TdWBrzcYj#m3}Nv`qDJmR~3ah0~9` z#9QP^)1PQ73gT0i(?zUm2VyEa#FzNq)j&D?R@zIo3xp|Kn4F;rzfKR8)`h9j0?MuL zmrQun9U*s7O?5eCk|QmUZ%s4gY4Y^rE4;qte!dx!)s`)3i;IeKwZ+8+v|yBK9PK!= z?(Y+)SS!bI;bt2MBXj*WpVQTb^$-lQ6nloq$cQ(R@5zvzE`yWLbK}4SC~iO^r9!lb ztjLeD(1)!MS7)eGq6TnvJ~rT>UKiHU*w^CbNBs-=N?EikqTK35EWf^{thTJ7qONvM z_1qRXP1Vrigk?8~MldfY<1t=E>~Q&Q%VFOv%fq}KvOtWeeZ=ADcuHfSy`{K844fhg z(>vouu)b0;l|oW6^mTNdSpeG#)A-gb-*cUYYf`Yg4@+?oO-Q!txMH&?YOkpOMB!#5 zKdiu&)<$Id4q8Tt-KAFC(jrE!%L(Z{#IKxF){kQEDZqEUY3K%+IZ@?7EF_J%5R%bW zrSHUn8M(z`S9zK=NSQk(2XRb^72UX}T3q8EvGSS{t1&FI;pQ6H3^sWqKI()qzKXyR zJ1>-Pnja^)d|}-nSrLXcUWi2cDWP=*_AYL0Dr>50sjjVVYN@KNzy((Q*aO5^EJRe! z1Lsv)#q;6>9H`g-l){D$B*>ky5y-I`vb3Ah~76MNSkUAbKa1_?$S zxat#k>EY@kSaM;Xugq@8elae2^6}$j9^6+*dZyd}-NfYeV6Sh1%O4Ec+((2Q(1VFP zkHozdLaz!sgnEW^p*{$w!Iozb`6#Kl#*`3%)LPh-lqBT@i!a~^*|81a;8#PD(goIL zK`(6+D)wEO_B?F44w?qSmEbsX+)Y7@mmm9aEWnnrHs)tRmdEVOjep9|#|56=Q*a&^ zvI@UD5AQuBx0HxDy^v!5T88)6=-bRf%)^!fysQgPI^atY%TNZ+>+>>P2t&`Yc4lKP zl;uE~Q*lSccvg>aFYCb5#yatL!J$(^E&+thkz+>uau8YrUk}n#yb#Z!ign|*2tWL& zJW*044P+fTKdS3|o_a1@i1ZD--a+_u^8EVNmr^hWeu`($DdPO~S*1s4a^Id*eRgl) zct2h5h#&P6^;gd+FrC6T^_BQ;X+dvtEBHtp3a_=*LUwA$JwP7Rf_k6KU$Q(Qw>z8F zH&oX)&1tDxR9{zHRom23Sv?oWUD?js1AYi-f>SaGk6;^@wcjfS2xHrh}rLwE! zu`})@IgbtRi+Zeu>jRX^-(zH#^4|Vlq`t9btya}n3F{doz7l7i9A`A#D>rU)+5lq# z8{S17;F8~cc>Q;kE%L0VwYW--*=6hj$5}E>n3Ye;QSc52?tOGa4+|!Tod7Hs>KS zG<}Tp0E}~qt-{-O+u3iF{QkuytFl%;U-IAO*Vpe^`DRJ#4<}u_SMH@|-Qu~;^o?-` zNM$h7DP?REU@d@^;4nq7MF4m~Q=NaK1_dR!e&d5VOVJo;t8+Xrm_X_ShUVW8Zsb%fxa=8CoHm{J}8!z3j6K?5e zYcw~)U478APrL)yFyou085OK&Q{nPw$|~5}jb|=2EUREI)^>D0eP;!;T(soVMITp` zp7&t)f%i_Stl##@JD=`%c;&@!&rf@8dru|u<-aG+-FU_QZ>%xvZ(H~FA>URPTW{bvY;Nv2CgNu11d>Y=I`KE4={h|v>~R@H)mDW%`dC2&5i_lRcs%&Dncn2mKU9X=1x@io{sM(v>TW9hOM4`O{*b8V%P z3br0zGW&7kK2F-pCZhqmhRx<_b4XcDHFb@RC|lmi8z5G_91B=s`_kD0SOHiAcnk17 zU~WYPF7ljP+ng;K@{02`l1`)5Yw~sZQWl+%_0uJfs09&5mW-S1ha^5E=S7k}BUMG%t^45}*`N4_JFN!kTb{;F1*P3#G6n2aaOv z0n&<8w&Ya6s5I7lGQE#szAIB$j}37Fs{v~PO8|`CmoT;-ZV$>|3((Z1u(gedKMOlJ zC}VZ^C{_>XJs0(AKztXWWIknZHsY{_XT|0%q`j|KpP*=E< z06xG5^bNLJSr7V2(~`oZ<5SqAtKeRZdd^H?^)t|xtQ59>E84JS6x;seD5m)r%56tH z0`%Wnq+_)x<0a(rFxK_v!yAt`Gh`J-6 z?RNAx^6hmZ3{VPK+kw6SF!-+}KfEsiNPv2O3ex~2$_ua-_1cd7*VkdpQ105jP&PCl zYmx7gR@5OFEoRa`2BdiB`pNo1;MPJWAzM05t zA#hRxjv?<&Q_v5QkNSb?a4_18zTDJ;xNQhK3h4kn$G~qg`Wk6UvHP*)7?cZl z)1l}OKo8!x!(9Sk=tCde4M?|o5^x1!y~n~2X?g(?=8F%o0XVoCumm?XPxhrT%^I`` z^Gbs211tg5lUs#x29)A`Z7tHEe|&&?fCjJ~ev{z#!nGr>4acXk9>gs@2J?6^@EY^~ zM?l)jG`0ue06-4F2sjL|2+#>Q6>t&YdcebgX8>;iJ_dXN_z{q?Dviwm7y%7{4!{b) zD!>}RU4X{`uK_*Y5)rWc0d4dCg4iI9e~FHZvr*}z6FfC0O3n`1jqxF0O|oPfB@hWz=ePt01pG61H2CS81NM!ZFL$u2%rU2 z0BQgW080TU0agQU0z3eC4)8W$Ghoa`X>2b*HoyXC26O;U0$dEZ74Qh)4Zx>>Zvbf* zBMo3CzyO#7SO8cGSOK^Ya0B4?fIk8L0{Ax|{Sx#KAQPYmlmHq5?SK`4%K+;Dj{u$r zyaU(_7e-*|bpaoO_76DoTUciZfvjLX?t_R!;_#@yoz{h}Z0O?n!vHbzL01KcV&;kem zRswDS+zB9SrqL{grLr*$Sc|`DJq~)f2`mFQ%kRc^XOnQ}`yOmhHknOfd$GN7|NOqV z{e6FS06UN!guetXfx%B>hp_3;%*|jkp##fiv)G{^Wx3Er&W5T*%XCc73@o1&utHoG zTnxRS33^5gbc-ddl;PHNR)Kp*s-PpB%jU6ab{IPxn!)+3meoO{cm#BNjjV|^vjx!f zEn-Kq#q20{G&=^j%eSy4%*I+-8?!S9^pPFR2@T+J&|kWt2P7S)j~x$fVgQ=a5Okzn z&@L`#C$JOQ3TRkPW~Z@IdUyNBJ& z*0cL?%l+@!1METe5PO(C!X9OhvB%jH><{co_7v-7PqRO=XV|msIrcnzfxXCHVlT5- za3lV!?9WiiZeXvoH`tr(E%r8hhrP=-viI2g>;v{8`wRPs{grKEAG1%`-`J<@Gxm4f zpZ`zxIr|s;f^BA7*jBcUZD;>xU$U>**X$eiE&Gmr&v5G(j6B+N^YiR(xA^M@8ZxIp zQhpD5<+lQrZ-L?)TBb9QKkPZ>Ka`*|1ig_jy)HUbuM?r9yD#H^K@A6-a3aa+wZlLM zp5m{}HFC3q5xK%6@<|4Ta;P^T z=cP7{eV2_r^46~ZH2KeB)4hFCm0tWfB7!|1|gPo78ER8RJ#e8PUhii3*fZ#c)vGo54W z=BMi_VA&wXO!48@Rw;4jL){hS!4IcJCE`A+ICgHsK?U-^gh6egGsYrE`r8nD zk7J@0{1)JF60&fQ@dAEDk}QPXc627>6CH)D0o8f99jX*CM)AtosqN&+0zNzjb8sIl z87x)E5k232AyM{TYnSndioIF?2F3tr-C8h*JM^#S(* zF2fL|jpsui@~KRRsFN5m_($rbe8@Ne%SAaaoVz6ZKXq>NG3ZJ#b+$T;j3uMKVGXJN zMmN{E0;mvO+$IZ=v=it45&V4|K!QTqs6 z`>;<#O;vOhcnA|Bic%Ts^o1Kq9(4C$I6hqmPPL=}y3srQA#Mm$f|N^o!olI2L6jKs zA9qnc6{}@vVZ&+2T8oDVaEDVBt{7Ir0_C{hp|K0ssLDfC9pLB|8EHA){Kj%!O=G$I zMffR(wmQ)46Gtz_cMZ-bL}MG7u{k(~gmFtbtD!`6$&+94=k!Eim*Pbw3ZL-Aj@WC} zD_0^^sOWUqlRB8!n;+Fw$`mL9)=?E&PD_NY5teD^t%F@U#h zy9`6jXo{)!P~u=h#9DE3iqsFgApe+V!KW{)pm==_+^9UmREPY+-5}bc_7TU(Wdu;- zM)-*06P=yh=16Wahlj$}qlBlFg(`Umrn_!!Qq0 zd&s>EQ^**y7xu9$DBQ<-N)QW!@O@g;=j@Cb>7u>vxWO5z3#l-;m1 z4v1(Z2vSPIauEf>ATO$XITs_to^^f&_f$0jVpVm!+PROMfr4xDXM{5=9^y8;<@nQd zJn#APH&C2^*LuT$BvbJqBXQY+T#f?1OOm+~0W&H(93HYQxtxGxJta2psp$CJD>?;@ zd2}T5QODt|o;RHf9lRu&OQ^aCR8AfXHH8miR7HI_6;yX15gKg)_zn%T90y)HLmw}_ zu8&tibgX6^ye=>_d1b=ItEl)1>czbrWdE*^@jgB@b-8Cdqc+tq4lk4ax>KI+(;6PM=Mf*{YVV{Ej!g`B6)Y-Y58)|Zc{m?T02fu;4 zcyrKAh7N3EC4WQI1Kn$BPf+|S@50{bjcIJs4H3V|cjNu0H1?LtF9&|l!tYa+-xBz} z1;0s1ul#x`?ah&I#h=_o@NWkM0V@Gl0@edw1bhhi5|Dli_Nf6g0A@fvpcSwJa2{YC z;0eH6fKLHm0)7VUc551&4zL0a0~`%F0dN}Na=^`iUceiGPXS*8#@{CDxfk5&00Uqi zU;$tWzzGNfRshZbTmZNlunurPpcn8WU;|(y;1j@Rz_);(0cq<{FTj3)>3}>y5nv9W z9J@SPuC?8l!8UEUZ%6B35 zzbhSX2R7>Hm?{3e0xq5B>|h&C9MZBg#+yAm3UZXZSxVbRSQxVB`ubJd*-I*4x>?R< zhbQ|t`BL?`oR~5iU$kq&mx+u`rf)3xLT+rDh(#gv&r>44qMc|(75PyG{J2$n-9YE*syX@HIsRL%hu0j}g z6IE?^C{;e;hurA29%GLxKD-%>y`QQyt;rj1FWZ{R7eTx+MK~h@Z3(Uv?8Y`#HNHAq zTiQZ?oD4y~d+`mahyJL!d{Tr#W7J~n40N>c1klj5Kt#k|0kko~t8G+^3xkV>cd`z= zds}e;Z&VB9z@@Bfbc0& zl@{W&QX%|$bSxLH*TvZE)Ybs*e#Y$!+Ek1^$(yVuwOvkDi?>j)jn#1%w}hs0QI#E? z+8!?PSiI8)4r6Vp9hixpWsLb#T>+j2J3AFw;?6G|#E1WR`0{k1-t7ETS-NGHrpmG{ zyNtg9=uq){eZH0i4dVGLdaBHgH=7O5$Hn`a2W4EU&LhbrgL=?rb2UA4_ z+Swmc13|P8c=jZJL*cBKzfnog&>I)i8GD}Iv9XUnr8f@=+&`ywwFOApW~0a8jfbXi z8h~p|anAUmQS(7UaAc_5+g-*USA8vn#?&rO|AMb&DDSi}iQjI@H%(>OhU~6<9N z1iDo@Z3AvKMC%Kg%fn9+Bdu9^m-8xBzU90sly5ohT;;oQIZidvkFJfv4e+=N5Ly!a zi5frXggDV&s?|Yz%m4h3Aim1t3aKQuKP}bo=lDTm2IHYi(y;?LBvTZKQLRV}K9-lq0fHFTZY zU&(~z^<4}OuWG2Rs?qDXf*I|fjQR~{=nO1t^9Mz1vd|U$z^3EBbndhM*YAWF zMlDNL_1Ah}5`(Q2V+U%cY3emLO}pko&05WSnlajav@^7N?Obh*)~CHld$aZp?T6aG zYroP?*6pvGs+*^)(=FDWu3M>lMptY&)o`)lO2f5=y9^H+o->Tkzcyb}u)O%X;&sLM z7yC`Gn*L^*Xx`KOpyeA&E}dkT80?-H+fS3HDc1xw7i&J$?5jOko2f0(mZ8KWv`1>& zQ0fZp8QL4QcWK|$Zqh!d+f9Fj{$l+){U7yH3pIrmg%1=q7JXi{s`#QFf(~Rqlj~jc99~vi{=9!vJ4pYcsQDT5tLAsjADh20w^%wXCsy>m-2JRI=Q`nOQ&lGGd*iYQdz!eNfjL)bz%pzZU8*u#n^MSsHDkSS8ue}ZV) z7Q2dl#jA=hEY zY`)w4fH}o7-jZp_u{2s2TSL|r)>o`=ShrZewpNrJR`ONJ4^;oPSUJJbYYx*Kp;@W9 zNppwhZ<-%8qqIhCqjs_O673z@`?OE$p4WY=`$@Nt{$PDTe}evY{e60;(Q7={xY~G! z@jle%4fOg~#)+oMraV)=sm`>(U%9IoNWX#cw&!x`^tsp4K0XbkPY#rxiU`^g_|MMUAF_`784n%REcHm|1$O(b{A^+WLbv zt>mvIf2X`Rh`c}5Y}XvAyHj_+u0=o7kY`wI*qr}W{s9Gt6#S{+&4M2bQVOpvyt!~b zO8BWLwfM{8%Z=|DKQ^u~oo>o8>(Sy*&F5P#wLEEk-a54;yX2FSe^K6>aBB-3r{1S; zDn6>XtN7&NtBThadyFCDMaC*GkpE=gy`~pTWP3~Vc7kS# zrchg=-KP6aSE;Yn->-j6{}=tI$S>7!uwka5+;Et|Vdyk$H2l?IDVSSuX2JOd`xXX^ zR}_Cx{I_DaF=+g~<#EfHl8Ggzl8O?0iM!;-5{B~wL~AN_HM(WG({xt@XU^6C7qmDt zKR3Um;Jm_PK~bm zwdZTk(XZCOrJrti)3AU3yZP@Id{UqQk)`+~{5) z`N=ZY`aA1VYqxc+^&{)plERYXOIDWLRPuPqGbLL~Sp6v24hx!9q^Z^%sadXBgPD4e zE>l;cn*%(5Lid{PL*4hf>H0i=|`4Vw+W z7G=FYAq-1T$x)L08f?YFX zS7>(E9;J0^@7MmQ9jBA@-TI3RpBfzbFXsO}zYuuV3ko*Ba7E!;h5Hn_i|#3!R9p{J+|+Kdh_j{(po| z4iz^NQc||iSW@D=_uPBVJ?GwY&LzXCMMg;rlQuG1RAfv|onm2NQzJ)4hRF(3 zCmIztDs*I+Xq4nAX`;i##*&QLUZ0Q8zTbVHXM46k_U)gK`aJMC_uTjU_3M4ltv+<0 z3vez5AJK+k=zQW_$}i{R`2iIu!r3VNKGWPvR|x!}?84u#v^RTy2z_4z{{NNu=n3&z3(j`o z<0*42nLrM+^UoH+q zb$lbPa4B|r7WTTr{oIZ81Q2+kx54|3_mOwj8z{%h3Gy0wgPbYzWP#iYZSkQzCbgOk zJ=7f93p|k@;>Cbr8t0Aic*E|k_Gjz_v$@A-@;i98xI?@sUJ)zY8}tl4!oSRa$bU5S zb1^tm7Wz3W+WHP^D}g4_$7zN0ywfW7hjDL}j`RoniGDI_`Z+(47=h>Bk&PMe86O%! z^SjV^9NOX6=8NW8Yk)n(9!-;}ODEF%=`ZOrS`S^*>GU}Bcp-n4@8U=JaULyV#Sg`J z@wT|!z0JJ~*L)Q?P)gM(*N9%Fg(i`+9J>9>}zYE{J*k1=UKNVUt&coH? zW2iC07;TJ0NBzvW3+rh$P8hdB^DQ@<&BM@pC(T~-yctD?kpyxDF^Egjpf?wgL*x_E zPX=07Tl3LhOQAPU+tFC{65OT9ERW4$OW6vxiPf^V*nX(8FW6rhgIZkZlsoOtL_U>2 z$V>TpUd?y%LwtvLU3||S?i#M+&TwPnthIcI)cLPzE!EeZ3cIoryJR3w!z)xCVI)< z({h763f8+>EmJF1mD-}-RTt|^!9f*3`W^o3{vqg%6aLrGs5py>b;X*a%*UX>mc!Wu zXcT&40ez6Jr+w^OcCmA*!<=@0jIWYwNgL*|hONxC)NS`1Fzg8DgP9mCy>wReO4 zFToYAr~Bwgb}d^4;3wW zj`m~yKv_hXLjp#Wkz!cJYhdvtvYMbRa5ZGP|EGU|p<-#RA(yHL<{X z$dMuqHLwj1>##T@z7}zA0+24hsPlVKseA0bb{}?l27L_GS;M#S)BL1&#yh75=qvPieWT9O zi}f-csExo`pFrS4a+DBT+7H{M_S1GHlvgy3#Zh`ei<}is2$}8^4~RF#JK{I)c6Yyf z$o&(v@g(nh?`621ch&pqtU9k^biDTUWcavW>9hJO=T`MA2oNIji`V&^E0y>`xF4HZ?ayt?x6S3FX=gY8ykok zn=Kx2AA%0u=)Ud#)@wkA9rMn6U(4^PRP~HXN4<^kf9Oy4Zwx85j)*X?<-;Ltv%YKJ z4K|od_fikNe=mE0RkDdrt~1+t(%I!4aXxpV_$*$`SMjaW`8E)8J{jjsc5ZOCVh#Q7&G?PK_pZS2*#%XXpjYX=I?A8o zKZ{C=4D-}*BoeEPy+%5l4qRX44B{8_5GURObQ&QxiI>FzIR8^(G#tOeF4efdh071E z_^8|Ee(CnR1HBk;q?hEm-nHIbc;IdFh&&-<;mb0ib$6&f<-?gB)JOCHe~@2=4sG@i zhE@)4jSTC)NVwFXIm9eMEnfuW9c~DMjJThW;4fp0P9#|K5uR_lZk~4W+u2{KDc2Od6v9FwgWNS$q9JHLDnVK zXv?tbpo7QR)u@Hb>93#{|3F7DkIlszx3D+Z0d|aCBj^aEtdGIv^<1RX6FmX7jwlT@ke1`eXGESV`P@hfy*hCHNfO% z*(&cuSFA>zy{g8D@u}ozFZO^ygvG?28)0^oR;LRVfd!TjC1Akr+ zHR6OgD=tEkG}@hj4!h31*9|f1i(ZX)1b1S!djPJTt6Lq4&CgmlY6 zsMO=+3>gBY7UK3ht^1%~zObg_y1%ubKqp=T#?4|I;3x(=o^!QxtMhZXsP~Zoj^d-a zi!PYSEBOmh-Fx_6egG&vKnxU#VyQSO{)+uD+%>?vr@Xyjg->z3HVUY+9z7BAJ-g*w za-aM_ek?zO=J`^dlM%?GLf1M5yGN9(CaPe3t!U<3)+gt;c)(j_nnHI=M4(czV zPKP1`SOPq5@jvwgm5~97Js1<_!bgll#wqmqQlL=?wKA|HA^lnlXWWV;CC;YyBlddabd6AU$Drv4(&0!h ze0md|MHkVh=}UAM-2*;r13L!TkC@Fgb}*gIWI0g%zd(|@l&xgXuzFxg6FbC?vuI}+ zcDBHI5Z*MDLRC0TK;#pstT;ZB3-0q9_a=; z;a>0Fgame3I1k$7?sDIC-vhtIdZWDw-Xt&6%k%E@wjfu1-#g@WdVluD$gAb=k$irH zl;eyX2W^jDti^j8@G;i-%1k4km22%pHDuVc?4fitol1WJ?YaRz^L^ThT8(E(Y=o2H z%tD^>3LJF;zXpDD2Tv8hKn}Sb8f+YT@m{3DW$p*wpS&?@hB~Pd^jN)KSLw;2?`w&~ z`RzbpC3bWy9nO|I&&ogt?jQc`GUGc)p5_7zJ~fYyF}wBoDIWqd6E5mLQJ!OG7LiHr{%SL3`yVcw92JPUM2xKth^b|c)&(gDz zO1!9F(RKO_B&Kox1V7C$@E5}MKJRZ1tp}&qL*8K$sUz=__sB7#tZS{A*6migwb2@l zl=g8r@mHY+_PTBEXGm)!yunCoM|xwtt2_cVFcEs-Cht~n7Ie)VZ;|(~w-OF!y|>YO z37P3`?=7Ij2hcj7!P9){o%15(U^xu=?ihI$GALJ0l$n?kybh;xN`570>DAixCnAFj zhBJ-*MyC--3S@K zroGUvup5vOMbQ+RLFdu6v>tpLWXb550;CyrtR0M-P+MIqTk*D!Ic;i|) zzdoLT=|iq40sgj#UJ;K;LJlyv+HH1wFh${BwpWB1N|V>^#Xt>a$wFBv8{zt*ktSxU zg{nd|s7^3)iq6pUFfFOq9Xf~{A{}?K+^_T7Lo8(kagH7T8A;F%`9>L(bsJQ5qM3%Y zs}vrv6&X|lxG|TMkQ%U7FH&%cbgdY3pk}KFxWVmgy9jk#h3ux=j-fWqf)}iW3+zG; zYp_hV5Pa4E=M?3npsVINYoT>I;Bb?X^B16I>v%g}QjjF3h#!`D}-Ce;mJVWWn#bdJu|1-d~uA~Oi$ z9Rz_uC+FvI6(I3fEr){l8t-$$HsfQEgP7S3r^2h1!^8@rx5#DtV&d=Dno*>7PVA~{jCO5*Q)KRPSvBf z8nNHan8&q3_qD4I)LIwzzen{#)A!?56G0t?94bb~!RaN0W_3BiKt1-O1l?8^?zf6? z$5n@WZhN@v8p3_o9PYffaPM`7yRQfR*N3{qqjYAJ8IANY4#`=9nP?`N$;fI9(?*Ua zp(xYLDVUdLAP>qiv(d4+sN;O3TJw->6q-fo;1bkznOSbG1#ebjs#=ZtX05p$99oa* zSEJd44sSu-w_)1aVRj;g?MBDEy0|w3^=_Oxp<}ZpWWj?K`@+Q{JS;fVY*si&jb1uhB2W8 z89|v{j>&W-t76rd_thf*s)I&oz*MFQlcN?Uk!|+#MC2TKNa;`~0ldp4R4z0Zxl%qY z0D3M2q7-3rSVBvYF_i;ND}XRnw3^n?TFiXvfUXTdoF*hsEwmLHr5$M72?YB0{cJ$V zaQL89md2(4oil(~Su7i>rWq5-Rv>db(5e&D&~7BLy-pvHI>3WGibwMt*j9H~KtTj^E-v1@>0+ub_19^Sao4a5u#`=S5teXIf=*Feo}hvTfb z8o)$Nz~>fdyEd!c>cDKP>;Isiq&e8nYFaNkLVKQw^9%UsfuruT`;i6(k+?&Ulg_xKXiDIx=DUiKf ztQ8fQ?p5Kbgc_)n?V?W9iw4msnxOSsL@SWL9qZ{7T}btNzy3SjXg}37wg-&FA-AMU*Ss$jRwc!3b z@L_|~h}qo~Fk%KKs9ETT|JE*NLnp}p;g|nqm2Plnuj~s=^HfkpsSsEEGbSk3CAt*T zzJJ`$ijW3O#aR=4L_0B<-p4x$P9pTo-#a6Q$MJZcz!P}`Z{$t9nYTdIw1Me6cqi}T z_`wXEU%^MesC8?+S}*Vak$n<%5}axZ9HxzgLh4kV29=NwWt0i6kR4VFc{(48VIHQC zg}O-pv#b7RRn!Id+kSxlpkE{Qu*n zIp@sfnP;BcJTvpm?B!RrdAuHv$A|y>`#qj@c=BJd`upjBnvi|+*-xJAd35v(=d3fT zUO1J+<7;BZ{D|m5c%%6Z@lrQc;q|RN9Hx&7@2cpq;$&E$PaFsb^V2(`OKK8 z3%a_@rl)%5g|ogL|294wn8d!L&z|p)27~{K zJ-Hnh&eH{h3y|J~{6%=qI=0-*;tRhse?Dt=l<@B{4KfM;nmjW*F1%jDQ#1mtJW*u) z?O1rZ#TU-e zZu+iA^9DTfd=}*c|5k1i!TkUKPE3KR)_d70U$hA&(vfd@J;E0iUFrSrXL%AkfA#B< z_v(LjKmNo&lTxg=He}~@T-}AoI?DFdU2W6EKc@pmP)-XZdKwo!;PJdypXe}Go{M}d zZOG5xxePFv+8eavU-qD_G(h!lwchikN~20z@bnQJ@*YHE>2<)vdM}XZXx#F^LrAdt zvdreUb%C>q=+auRM>}g2^Td{zntb5p=keRbjcb)N@!FEaL?;-^85Sy?RJ#+JV2U*3F+_d0Sh`rcYNXl zdTzmbZ3%j?+N zGJ?3Gam_(Rz4fHN;|CILL_FB`UOlMd=VJt`GCTcQKzI6&_V*)8apB-}B)rcA)bZ&$ z9z4=}k)bP+1kS4{BKF%)or@0-||5$9k`r7NR=}K>d{Mse` zR-du(s{}_T0%Frl$Z88&c`DJDEt6!8xbEOr;JKkc_3gFFbJ_{uhd(7ssELjuH zP4t+}eof+=QuP;9Z@^fnzdTC1Y@3ojO1IvgJotb>NAiWV%rfC(d; zH#J7B4g(Do0q+>hY186pzDFd@#7HzC(&pM!VRC*Tufy60z>M^snTeE`Ui)=dAvATkV0kuQTY7fg-bJqi!+6j z6ge$F1peLO% zglth_XZ%ONVUeu#CpN_=%Ibiu49VJTSsWDGt#^-FyN)J$7Cq|9UE}W)o0j})nN$x7i4h+mZ&s3*IfBSV5)M8qbezGuDn(! z&6Q_~a&kUy9S(?czu8j8jB<{sC&}_^O5;jOC~zkJ*5NVciUKB-N9E)Yz(?!~L!oDE z##gp1&)Kp#nvK^SSx&Jkvdf0#=gRUR@^hghtCIk}y5pRrEYEh|3U7><_aH^|9k?-q zy2Y|Q7t&b@1GqR^N&``a)JioRnJvEqeIcing*DM)v*j-Rm3vMS-x>^FauhuDFLIzk zVHJ_(`G6BuAfp7C50JSEr`RLX(cMV_EYqih&>gsH~pXTicRg7(=9 zKmP?30QJn~6)0u4Z-Qo?*A^w=9mv~sP9My}>f|}e-e2bR_r3u&oNKNPs6t{RkOcR}up8`-x#AM? z2aMMSAwuqg<`H|5v85lRZBXd46GXsl{uYWucXEIepUUmVb1uJ01n@owgb91WH^@Nj zw1#ND(Q!(Tk)p=2E2q37ilRzAs-i{d4S!Yo(R=_ozzfJ0iSlYu9yC`dCIJkEZE^&_ zBI2MODiBL@(MYzK9uhZ3#f>?3$g~4Nu_Rwi&K64w8b=w2AYJ8QV3Q-yk~jL~62B;? zrJF0tV*sXf&1_kTfy((7s9x9*Ei&)vvX+EB6tOOpEIROkTvGH5(X|eF76uFZ76#7w z=$yZp?SFADrLynu-HT$mVsdD(iR|8A9)~h&5{L9KV3A^qQg}xA?Q8-tB~DKNVWoC+ z$smwB2jq@9{}0*Pf13fK!XPIP`K?1)@vQ5*Kq*>*{h)>a&ou{9#I^BT2U0X7jT6Nd zly$Q9cV>O``^GO?ZyAjzt7fk2a_wLDDDCO??$PjJ>r+{?Ma5B+jlbNxYw&w_R_~u? zx1s!>r&=ka_a0pygI_jmQUo^XWLW|W09U@Gntif1WW#@#CDj7v?|&}$dV1f1eV;*f z34mrnm>U?DctmV_;&c=jsgHgmudGJu$*JN1dyy(uaIOWegX1~smqyvlc`%v5#D18p z#nGUK&dLl_vawY^;|ABwi23Hem?c0LmSz!Y8Hb0^;)`!(NJKZ?I*d(*CE z7-`}Vx!05L_^2&1@i214hvwRi;zd}`S`Kgc7{`x#@gdNP7%$oZ4$B_YtP(Hk68p9s zG}mrHN}bpOrZ$Lu^05a2YTWbEz8htYZOE&ZkL956-qjDW5scj^Sz}M{FWe$m-;YA( zJ*Cl#Tokm4SY~Ipmu1%1bMn$$!5tbF4zBP})M8#Zt2C&b8 zl2+6c>MbR*qKb7ow;VENWE(TWaz;JmVT92sX4HeOIbz?qkItV_Bd!aI8GbpVdK@wW zup<34V!bD6c~sIZpC%_omp#K6znTm-n`dECXl+<5cBqjRGL$=xcA*sfsR-dwEh@6{ zs1X%mHRq6a7{nWINAcIR?}z@8vEn6&Km=IFoEwn=dA9n_T~Ae8>d)J0^_^_q*M(8~ z+kiwrXBI}-AW8?U4$6)n|Ib7gM=1`UF+pcDoQH`dGEg>zvO#20KMGg@&tkW5kt$rk z!T{X#qb!e^_zGG^k^Dr*|E;d?w%1(y8d3`E&|!HGRm0e-^{(j_ zjPZ5K$164yp9Sy9WeAYRyzMOYb=o6Y=543p)ftID;P{utW|zkxP6R|D`v!Sjs%coD z+4ld~P0cn+ASI<>XzigjBSUL8Z$@jZ0h*EEs;!}=^HJI*=B=hG)J7*4h`T3gmRptgWr05ioqZk1NBlV zZv`;g^~dnEZ&*a+>N_#(-(^@gFEZj$Vm}%JHKf6h*&sZP^b|IT7uf9|N{a)Yz5YS` zed2TY^U-gFr3O4}0~O5T7$mJU-a#AdetgBVrA3vKtL{`K)ZbN1Ar^lI7B0|gz2Y=} z6>Y6p#fIWBYeP)i+JA$up}YCc_xr#Cg&eBEM(bK_F8>DUQ7RiilagF?<})IU^)8Mh zf1oOrl;Sl}%2%7JZXL`r+yBIo+e{RZGzr>r{!1ky?wg!iElXA)j43 z(oFXG3SScmj=^Fzjna~l;vPQb>TLWi+>Gzl%mqtUZUjWT%xB+{4>y*xmoT0o{9g>B z7t8utoT~3bA$*3+XX@iBd2RzHdS35MK8Qkg-X?inK&0V4jqz3l;ktOe6%ng%!ZQ<4 z&79Ib`x&ystn6-G{vLWJ7y1+Xmz*iOl83Xl^jSwom{mL0jYiRNdkeeF$z6#KwbW)# z*457RyZ$HqR zS|v+r#_a=r#_a`l;B~AfHHD(&q6m-^4@33`DeF8yBXyI{2?K1~Anki!R`w^RBz6p# zLy09`>Aq>`S=j*V^+4{f-%MA|H@r*^(h;adRJJLV=xGeesqk{*BPa|#)`pPSd-b(l zR>vX%f3xgatg?0Y{=H4hPZcW8l&e^AP}Jxl9YKm*MWIPq6khaS-^^LUt~u_E<1me>>95vdu`z*D?Sr zIA|@Q+pzjVSx&3tY-`spyR8^}h0R615ykielF=0?5UcLz*CT3<@q4<>@P^?*KWDDp zX0DA#vjHh*P=t+cKt&DIZ?hqS@Rp z@PFPl7F0$kdwL^wa;Y2t1BXK@iPIuWxl8V%r=9Io&;@|MgZk8EK0|yuUC1ENqGN#0 z*FY28DsgtQw%RXY(GSruo|*A{7HXzH{wJhU@m(@Yk-$ z0a_uur4sU+*pK(H-BOEpyhZFaQM}m|K6B+MAi1mzS{)HlxvOw<<45+IQb-C``gD@4 z>=TuHk+DZwge$r^ErndjM<}Ouh}#YxxCKa10=vz-iUKP>q@y7pQPTAa{b0Fj1Ja?w zE6-$`Fh=rJ&Z_uwr4REe{pJ@lg8D5WW`v|6T5_m?6Mdp3#+NdWXem%HNGZZg)B25o z>oJ=vm?~8x7%P9uMl2dqEHf7>+#xa9=B>9O!)z}$=X4nO2RX^xBU=u zDT|2@de5BQmRR*SfHxBx03BYi)g7_=gYn5``|aa5Ap<@_$Qyh5ey|8WN`Gke{de}( zKM6P`TBHkLO} z<)Bf>wz*z+08al%nV*=6M$ntEz8waGnlP&RiWsBe1z(1a3M3~mDFM5C{PS}*He3YN9y|K+E-+*^_&5r zG@ch1$+`a!^L%n{TFmpyx$jv=f?{5v@n!Tjl-C1DVJX=TO3V6P=Gy0t55+iH{|_<8 zr!!Gd{Ks`H|PS$=Xn)%m8?yn5#rq$^l+r&xGRvwumyksDl56S!gJ+ z7%Z7>ttST{i(i55rwl>1xPl()JtNVgVM>kj9Bfkm=^=2@xe<-F>37XhXB<)zo1TQkV|T67=|ovd z9^m$$p2I5VF@-aufs~m5XIGqSuQ?YT#dzB7Sq3t~0PMG0sA2XROrYGu&Qw9R6EFF=!xMlK~?EeS>E`jwZ8W)KdIQRh*uqS)~&Ex)?G1bne!CpT(TnDvC(v*XMiV9 za!kQK3UcNnr;U5a9r4e};5vYVq>YN7geB2KBe6nk`A)=Te#;$4RM{)izRD ze8NWgFt;DMDfx4>BiF|G)ni}N&xM?LEU|OZ+4gO@NX*+Q^RVtZ%DBRZMV36P%dnE! zg}sfAweBCt&WbOl5r*fMjpePjfCkhmDVrN6#{08|I%GlVD=cH>f3 z|7deXAq$1GA` z{m@p*so9J$5l^A=IhKCWDMyl;k8t$BCf9hCA(SU#+BwLTt8Pb@`S_(rXG6B~&BsHN zW`h-9lT!nD6w9fcc$LbjAv`MORBnV-$*EyHs^!!O9yM|r_xoz)G#?&yjLWIPv~wD( z&qB}+9`$k>t2fA1O~l`~oNSj?Gd}QEq(%dfZ~7EXA=+<}^S7U1hOW8^PLT=lyUt%h zu^GRDOcIJ~=8ChBMM?iF(uPR--82=Gc49~S2sBHsIDx!$$Q%7;^IyOV&ERC(i&X_{ z30XH*iG=f2nn$n&NC978`tm*0RI@or{-}kXl%go*!LBwmvxFMAO}ht$u=ia>99H%L zMX8WKUm-95NXE-+{e>G%>t*8LHu*U0xA{020#~0jQ?A%-QF)Y!Uz;rg)j+6NlyK3! zRFnkqs1zlfAXkYJuIX2c5>E7LL`eizsn+%_wL@L@a>|JK3I9Up>qIrzV`hqKdcd;; zw$#BaQBB{sK~!TFqxhxT29N>~XamS1mnWDYQ*siQkTXO2^i4)ynkyK9qjdK%P*Urz zT1|F#>*d8tq4bHUVzR5aVdrxO6u zl*ylQ)kZPfS;OhlqhBUQ>EAEXD33r{jjp_d^@*CsDm4;vfTc87Xj`sj$t`LGmd~)^ zOjAZmJVOMWpJS|s#ZNzLDcFgt3GeKOM~K&~w~oNJn$5pN2}R>d~I)ot3ERY3xJGQ{7EYRUXcw{()HbVGtI|_V{EIh`pT|;!0U7LzG$T2E= zoR<%RNY5<7yE2qmLCw|N)dTJ|9*hsWj#zyo%*2%_lo9{6tah)erpLYX6U#Ie-e#!@ zqR*|>TnjEJ8qfvPVkQndD^Qfo+mWMIm2B7VJ zxneP~hu%wVpRtBh^miHn(Iv_t{|JQvJc_8S4W3`iN;%rvz(yqcn7-m)_=~YUOq_1O z`w+6%kg9iW!%7rl?|z58@%OUM0#)`0!^Q!naxaJwXIhh_| zSB??NJ~}%oKVU$^i5akdr((c!VwBnZ-T~E#_(YfcY3CzL{q0x-qjo0 zGf*3g80pckEBfhgSi#?Y6D^eZ1sp}rF}^Q>7GB`Gmwuu|e?Ifl-$4*9T~589f^edb z*)28yzzT)LhC9@dqg@n%)j61rRM{mttT-BSfviF#jkLNJi`wvz`3MrDtOJ4s6oMqY za#?-p`?1h~itEtU3m_8vk$wss#Jb7Ty}Px4r`p%?B5`TaRG`MGQqm;>oW!Qa3(^JE z@X*#PwT@q4Tcj)T`sv>x1E@-DoPV6>^{_wblMv4D7H-@sEs~doHy~eHivRd($5-!T zEU&wQmtpfI20-Lv+EM`RD1!A_-GPPO+%abR-i0;I9q~&sL8?mZVf}b%re|+KoPc{i zsF5okRx{N*)iiZohzPeSv>(jIyR{)a;BV*k=k4iz3MuXayxyM(L#}ecz||0@Z=eSX zjeZ^P32Cn6l;%{X>%fj?j_49z4;A+i$c*E3;6z)e&^m;^EUks_rh#`UccAy zU3otZ(OOOw{>=2n(YgfM{Vm>~rc?criR^UbkkSH+Q4+F1!v5x%)@hVZXShPj> zRRce^HJ5Ky@Jk*hP0+nMu`Zu)i{Xg1kwPd}En2zqiE>rqPErbxYK2lH(Z+Q~(OSU2 z>%#o|Fc%!fom^zhP;_?NASJbYX{<}5bwHHnsMdYfxKD_dO0ROCn5U?348`hM>^_U! zXMy|FdkA|V%}<|%BmSS$n9QUc@9~v4#ejPOx&sscnm zI;>TA(toYQ(~oBd7F2n5n z1F<7L@dMQB8_}4?ehK6S>`Qc_R7!mz!6VO?tCR-rLF|@A4J3r@d%T8eyGzM16`3C-Q2=zEP zT-JX+Rz3mDIUjpxc|Ai|;%529#76`j9adXMn!Vjn;yUy zn*~M`^pIuJ=lz;nW1=&D2N)6+A?A=rocM9=z?ZK7GHp%9@?6RH&!1Or*g9*`9nBo$WY%F5}0Jxo>_CuljLTxllh9?naOec}=J6~R|K#1QtS zmjQ<2l9PI$(6Sm=_ikYO*l1Gi*FpBN>6YjrS>o5o<#B+437u+vBWuBAISG5)@sTMy zU0fU+nW9I){LjJsj=)(PaW*!{N60I)#VJHz=>xJxrqFE^+!S|I^dlEHx-bU)N$E>o z2T{PfFwDDZ9;ieTn?RIkyhQ#~q0kdAvRIoiZ!t{iFgjW%yDjegzg^Py}JR-gU&vdbBVNN&$f&w*(* z*OrHnP=H8$P^17+USDSvN!6J>)>~feB*Wua@?FSS<+^?daLOGGfe+3djLpN`Cvb6V z;7RPeowKp<4VG(s4^*BDD#r}SW0f}#pShqhmrb zgQF3y<7Bo2O^i)sW&ng%?mvna2nJOKaAIe$EDgahe~)8!b%s7UX7gXs5R*Wk9MC7G z=~F}cpx0qd4K-k=uh!N!=28SP{iH}Xj2iyha}9IlQUU{@ygkoioFN6ikcaq)0D_W2 zx=pb8oTaST`zLUG~n;o=18j+iYeex{O{Qeyx>+;jg_5^eCNq1JC=nL2G}ydaf1+!s(cgRVzgp;d$?XZIVeja z2%IcdjmqJn zmH&Xsa&q=S5!FN(r6NO1wdf{7jekOa;EQORui$HaYmm1_n?OoAF(~Kw<&O}N>^bRk_%}5 z3gpBv@`~;J^YAE@KMdf3@b6LND~2^FRso7pQ&~J8T&#k86ro{yZrQ+v@dA>a@OFW0OET!7Mwh(#1#I`Rj+WT@2cU_9@(1pk^uxmzezr7mo`Er_1&WWgY z0ox8wwTo^-UL{)=4EXec!x8cKaj!tKRk$2-3s95ca>4T_Muaa)Y!xcSFbhRl_$-2* zEnRA%D7#YX{ZYg_v1a_lT5-s{bpvqQk3=JW6Y^@T4GoGbs{5~<&qg!>3V?APq(Y;D z=mwk&2Jb zWb_zIpx)uDmGi<_NF9GP9ZoR08no2z?&)}>KTcxf^=_O8Rr{?x|2b2R1l2GW&eD|2 z#i2YzHGqZ%i0Co+@LLDfV0*E3&}ZJ><*$ogjFI$WL*5$!E@$qsoKe<4yQAq)3vrqf`3CbfyX_=k;GL`dB@) zU#{s}1nAXrl$=5O*2uLa35F!_EdtYOt|e=8e*Jv85F}%bb!(ZeW zUIKy^rW;>Joe0PoHYCW|qR6>bku!s|+sxu$lAOuokn@)aS?z7Mj+y`!=GM3#W~rhJ$6V(mUueZ`+MN%hgTz z%dfxT3EITP5%ePN+=oxs-)Y&5_rjJY{MAUz8;-;xBJnjMK?49&3!G=PsZV7%F4OO- zFBAA)Q3VS_cOocTJ_c0P*_L1HH=nGi0R+G*!cbX}>%9is^-Cv6)jr<-hux8*yizlMxg;9S1EEQr_v`zCmxA)sOZ(AaV`U4R;LYSf-mzbvJc;5iAQ#FEs9 z>Cfvd95XBl3+x4aMgb3tw021~{AKUm3huyxyq}M2bEH@1SVxR_xm||+#jFJvTSo%% zLc8psg(+3u;6xy=e_a4IQWnQY{!3Xi2i~aZ{MUQYURPnc|2&jYg(UPUpG(#W=)_N0ms?=-8L?4uqMQSfIpQR9a+o zAid7Mg6Rzq*eYbyAZaH4uMy81Ty3bgL#@b~Wo(AiOj01N76VFYXL1)$0Ql1LPE}h| zYFcGBbFCZ6xv0~Cwz+4*w&J1>Y_C>k4U3Ba5}{xbpj;Y3a!5RfVsuceQH^sgl=0b! zHsRO_M-p)8h^X5E0)S~w^0NZCus5fT>z zb}oQ$eT4+#V(uVW%VJ2%9Am=@5XUq>O3-QtY)dIBgz~#+R?GXYnsoiL4OAiJ2P)0t z^&S5hkn@Kx!QqGg_*b!fNFPRB> zXuvlGunN~Q;8D-nHl_gfL_R>f33$}mv2{itg&hA^BVndPkaBW?OZ#$k6FX0*(CAF2 z2Uo2Ol2@D)bXrkor^N(-3xDny$yXI~?=92+&EJCmCwn$9Wb8U7PK7 zZI$VIXV<{@us$d~`;^d*;_^834!W z@)n|CII2;p6qaqWZFU%oF`s99kUn=jxDv_>O4GJ`v5N&i5rrvfbeHPASP5bGI3&|l z5+@LoU4tg)5Kk8yO0+U01K6NF#neF!Mm1mho@TUhe7j;+-X`)rZzl#ziv2~{8E+=u;uXkB%zUP1OhEp?Z*0T1b?G)FWk0Z9#+?_XzUjc z|4ZjbGWoNg_A^Gh@}mrhIs0F@)$k;b2Cbuh^YZrrE2=lJpKf$fYRsVIg2hBIM?CBU zrGTSGYsxnG^p#u9$8SGXq1DD1c%0z0IQ(~HKfNu}$_6bxR?<;UsW5ts+YUOA6h>BrpEq<|Wj~eGA$sev0TsjjUf1Au8Mo0@s?mUM z6miR!2h3-hM>hSG*Lp2kY_^9-+4;D|1GrosLcbE57Uc|dWqvz?GrNofJ>F@7t#4yN z0e#%6dL*U=dhf*y82aAKh>ITau$o+sS5{L9|*V2Nq; zW-A#al*>cCce4ivc0k$mnhP&j^0oRdruN}sCRAt}h7gqFPF{|IKT#iw<)GNt%><)2 z9A2W&`7m&)o#+Bol31x{F;gR;?C>4-)cvkwDo*}+_YhDjfLu~Wq z01Uq0t@*BqVz&NxIFG-sd7QVOWFCvNO+$H`1Ow1TTD-5IT=MNvE|3WjMaGbC-kL^G z_VV3SXcXO%x5?^LBGRV7_!3G)z^$?X&!}O4E(-^%GS^GN4FpYUFk8~+?ONBUgH@ay zaL>3#v`{$F19B$AR#VKP;m|Cbg3f4`nJtr$Y(9>1L2%A&e>wSP5YdgJpZ}6#Sf?xt ziD_yb84^ppcbF|7050&xOnd8xd4gG_HN3>TmI1-Gnza|pVO&MP{H4PSE(R~>h!?aGwEkK$$6d8)I&(9 zu2lma%K{*!(@z3xOLMGLKqgKh3$@%T*FvGV@aq2>y-Nn6XT+^6n6Y9`I|&3#)8End zqs;x@;ePv3`$YES(chuYG>`LJ^!7w$+E@lQ#|9j?7mL8d4590kApVzxK7e*y7=HtU zT%+6YUuv(DV3@nsg(RyhU0C?d|5^_gl8_+P)8E#lx(M+2{Rj8E=2J)|9@J#G800+> zsjhd+Ec_I5PISvKRP01>KF=~>%jaCV{EUm=W1oVb^S>IuS-{Wrzd64uh50H*J7KOc zjHrQz(3et6o8b$XruMt+Mdx6=4v7?MU?0rrL!n^rc~tuo55t%;RAA}WI(kz4I9~>n!+Ge67RncH;X`WYuZ+yT?orGWvToO_T zir_6AUn2UPa(uY!%@m6GC9Xi^X@NMtRfJ)Jo#rTxvG!U*h<{nN``~qG7ikqpI}u}= zf2$bNdxzaZ+I=$zr`SNMu$g#Bi-n%opcl^*8dlb^xv*jp#*X-BhxYLy=Hgz+)|SO; zT+xfWgHyU`GsJer;8=+3M0_QtgHf>;*L{diW1sC4#v$7`QC@}!4YR$#Tzj*cE+;>L z?_;)p41kPxpewiCT;7A>N1(tVG#>$l;qL$YxPt}JsR7U&5ou;~JvxT{AMweOVy6c0 ziazT4)uXEB9m-q>9#bP0j-g!^fFLZ9*gD18WwZGlRG}1sEFs*V2`ot<{2!6NKlpCP zbf+`<)(C^QRB#!PThlPkh*()WKahN1bwLGSx?R{d-xB*E25{k~2DZL~`;(BdO&hUw36A za&Tgc!#;1#gRho-5{Q3SM=M_-Z&<6yp+%VT`Y)C{GQ_n-S)B zf*~ICxGdzn1o;yONT}`D1-&_dGwd&cH9+f~ar?wkF*T@0Om#yo;?anG`wU#svCpN| zFCfXoXmu?+@*inMK#e~%+o#~{{)aB8<&?mi84*R#7g0Bw_%CUIpGtbt8zl1J>R;*w zSTNRUV$U!S^w&XW&{Iad1NV`GxL?l(hw|ChO^FW)58!Z5!jgsAyp4(TmyoSQcP|)% zI}mY34^v_GgPdt_4HQG>nNa4hh*!6Ayu0fE1lmsbLlvU@m7$vkY-8@8?u&YI3LSSVH<~FY+cLhfyE-D0%(e)Rfw>p9l z6X5PVKLBCu5D1u`0K%y*grkIzB7}jt(RM;`H33o&NM_4kfFkbu^7_?c$e&581!n_U zKaULH>AN3OIV?5p#3TL12f$?5qRT?kr+s2xWtoFzTL`(>ci^=Ij}BF1!3C=>x3!M} z`CgfAuKf!6H(T%lHh}}T+=JEcFy7FYvr&E|A89)d^{5`PvzfsqvARqWma%JX&F1el}xjw!R ziO2sF9)w*D%Ea z#Mim<8={f8i~$rO=Tf{=kd7cv7xODW;Z54dLV1eDM5g8DR|P9M4od+p^qMHOJtWuA($0e9-5a~^RTB;0KO zE9ZWg^KQ{|-X!QIz$c~B(C06cUfVGNcLxWu0QHBk;H@X1N}h4s1Z3u@^G}#qiq3)U z;I8*(E&lEZf<8Jv$QxiBS0ulEj}l4VrE#Jn7waP5`II7`(?uSDKxjdnF=Ei(&l^V5 zZRT>uK!T?17O3lS+RTY={!3%LWI{VabRN*J=OBs@4GlrFgS^~N$0rP`IAN>CWl-9UEMlde! z9tCDN?qcHr2#yX=N*BbxpddtkIi?WEaBkJ#@JwUr8<}=9B4jy~a-TCt9W^}>`zPFm z;$F4fdx9c>nv>2}#W*-S-*8<3&R^L0RGcS0G397noVy`8!$wKCKmmAy^GVzgZJ<;5 z??oW}G+(4Y^xxzB0KGf`j_F0e05YdJD+g%17_yh4?d?iE{}XM|&yc1sx*1YV!68$H zZ7HYVQ~gvf;LD=bo8gucjM;t$c88m*(0S}zG+@YlK_q+g-Su#eeHo{Bg)&*LUy(!( z>>s=dJNA7ABR=0%v`ve~4UC@ipE+hM#3DsnH2c%7fZisbdHDTb@~U}}cJdCHh%7<@!ILqn8@ zju9|%mFMVy8Y_F`>fcSnKzyQAcu@a_tMEn;L1S??Dmb|2ke4FYH1UjbZ?$7^Ne?RPgpL}A3(zj|5lRibR=IA2d`II8% zy2uk4UE#CN@L5MpiZFJA%;u+X;?MaeI56n{xOklkww*{)KVGeRe*+pF7Js(R16#yE zFL!_FxcBuxY+x7fV_@L_bAx+h{|tA>YQnG^`_JKx{Q>3ry64?+|GxU{{XjPh$9nL- z{%yzH*Z+vVum1)Zncn+!dG0@>Pre+uQf@p%dL3LEtd?}e$EBeEkh0=Msp7Uz;N}Vh z#ymd<`^Ne{gOnA6;Nd@RO5>;>;-euZzIF6yunLqVvp(wj_x*811mb*YvHwXzgf~^% z*|n|@uWCOVUcZl5E8#X*gb}2QF*3rVpzH^57fW8pvGCAekS%M$Xg1vRjeFu~vgyZ$ z(b(7YBl~!@#Cf+k2tUK zeY5>i+|Y0p&gsm<=HQP@ul2Uk_>g#B?AWr~dTSJ}fLeI({$w!z^Q1FkJi_Sbx8d~Qc?cT%vaDlpAr2RE zafb0>So=ZXAm)&wK(W^O4lE@0lCH)>CtQIycRbPYgE1KGVo;!z2e%zCB+-*9Bjr4) zGC#>|HlGfr$azKb(qikV*Ie-%v9c9`vFj^2T*J5s(Ixbz2pe*@wgh;S^Xo;6<8(pH2uhX55oMA1a#>z=IsZ55YNu8y%-AZ3Kf=*>o|@C~!#u+_~m(r-PNoi4aE%Y!2hxCD^A zC2MZL`bjpX&zwp4?B)@wEnk$ur|B^$U3fslXZW z$LVfIL7;uZ=#aPnYOz-ZzG6MgN_v4-5I-tqeFq&IVq*^g4XeZ!`dch+@m5Fvtd^;eva?!;@#@%%HoJd}L%hLDK63tS+#v5OXt zBCriJF$zWcYn2!c%5u~X2cWx+)ikke1I5yXmnidEHcMYOozh6)#49Yq6ul>t_>yjQ zKyH6Eq*Vj04u$8SvDUJSh9+%ONnh=49h#U#qA1H}5_?8e{-}}|OYdV-Ou9=Y6%DP} ziX@B&WyNMq1}UEjVyuCaxy7TDc*)&kpGa zz5b!ioTFN(}7 z=qlQ=j`|vRq3pJyWu~}gzA&T=tUy=?*p$tJ&JA{e4WvI$ys)bx4xk(kn>P$8koF)m zZxgyVwYBQv00wcZ-`Dth-hN$pXvuBmZpqV8GMFg|2P5n}=29Xf0>5XA$zI09tLQLN zXN^w#Ib@qLx}2ynREU(b^Zja1DwLjwHngjsTt^FydBUarcF`rq0sN|1NUWx70AaLQDc^AvnJuK#oVT=t%d&v+>MFe=G=c&nU! zOF$+Vx?}rFz?i6(xx@o7&oaSXBuGeNHFQS7E{djoe?v&tEg=}}c}O+emGyX%W14(g z0rVBy&CjVYEsXOraX(;y(KQd^04y5FH4{Go5w+82CaUp1)bWdt9_H71;q^5=?cS?= z6$S`9aTESR5=s#TiqK9xx#bwe0WsYx@d=1hjP7y4v6N4<-P2l%i7WoMc9}S6+Qj** zju5ZG1Cxy5l4cE0Du!CX?m&HsEPmOEY(=;8@$jhImeGM~)N5cp zyw~D=F5i=g80K~vk0(X(Q3t2S(~B9!GKVlqyyODRC45JR`PR}dIP0LfyPCoF}efz@V$94 zGtcH^=v?(Sy4?UDQqlU1K}vs~f#WEgW8UY>c8LuOayYB;L6ol~64>R*Eyka)VLg{+ z9r3jW&BS$@j6Cw1p9Q8=H-Q;d9{-&GjuYrSc+m$1o`Z`MN#ndtsH&)q9!Fj7EPD%m z=}+zsDaM|JXy{}*bP^cRdIn0>v{oDie#Lk#6^UKYoY5)#BIeWT#^&3T&Tmk8*#_#c z8z*nJKgQi$b8Ta`ygZ^dAk5ZISTIKWb2}C*mGfzy8ndw-vj2D+v1Ji4Ejy#!=k5Se zIkGk0$v~{LFmM5%Xg9oslA{?-Z1i^*8%XHKuZj>e{!_6jDTOjWrTXO|9K$S@t7%+t zCMj_z5pBPR&IZB)vAs#Pwr{_Rp1!PE9T0lEFg_-u@T)sptFv5o%ej~m0j1kJbpMsV zi{5ka8{YfS@ZPTmHt4pu+{G^q|4Wv)r+vaquNLV|e1VfjeUY%x#EcB&zZKxXVT3~+XO|k<0FtVZ zi-@xiV%$b}bWapKv-yl6zi`F&C&1!P&wa3Aj2BMoj}^ zded{rDji}2p>Sbt%Wa0}ITt_}2=25&aDJlZg4?K2`|rVB0qh1x(A`?ixPoMwCqjN%u56P^W{?*VD}eU|&Z;Zqj14q2!(E%2#Jo!i_pHRu-McH`1Awo?MU z_}%V){}%1Sv>$gn=Vye05W(L8#)-<@=$3gIW!!ii$dGKK2hu(1DE{yF$ku=03-@6) zHRH*DnE#$BTQ}fqd@DDu7oU{ZGrpBugXX=RqAiV#f%Dh=b>k2uJ%S|*T<*nFQ80@) zxSt5iEJ{&f8~n z?oVdH-Pvz-BDQ+oQR_`3?(H5}ak4gqaJ`NDBQ;I6IOCA$F2RpKPyNiF&QM|40LhAz zj#^Gu?>)1Jp07BaK41}b9_U-VG;r-}>Ntfuh?!ZR)4wi{5>W0aIynKevZeB7AC_uL zF!Cx#a^Y%fZzJ#CP~ZQ%Mtv{He9yo)8)GO45Zb^?q1 zWawX^{doEcx%}aaPQW95&oXqel?%R&?I|w`@D9-ue~3l&8eH%Faur#XQnxLW(1@N` z$;r7nl4^czYZUP!KHte&uttvby+(%;+>1t$R*`@9ne$QTUiv9p%(Fq*?u&+ z2a6Ux!ZF*OIeStQ8Da9pW%%0@!qFY$1N-(fJWWAQ@=&lfG!lfwtv;QYwd6}44*#43qhEuUwdt=9;HLZ6=e*X0#f&*UkKztC`|h)F4S$x*k0uYF+8Vxa z&Kt}F8b0Gy`}R|qmppW8Yv?Pu>;@O-`0>*tAehX?%?09BfuEo<}W#?EDLspPl$*LY3hV0iNVQAuai(Bj62T=$zw{)VG-KFr{&FvX#P^P!Hx zId2eq<8|@ToP9$ufAp&ga}-D(J=L!Js)0^yIgCD_CEuI_EJ+B)hlBmFYfdwmyX8=8 z==@BN5*MQN{iG^>V40o6N*#$PeSJ6&o=U!da`JOk}hs{fWtD%uI+sD`g_}QffvRkv9 z=~Ql*CsM^(2ffh^4?FJ?Q-T`iEihvHlJi7Y-hOv|8uu=d4FQ3Zyqhtpw~iDw?%{e# zS5e{7#y80Xfl=d2uh0_f_1al0%rJ?B&L>O z0M$DuPey@f4-utJC=hTfBMY1?98!P2CJjEOnDcd*JTsw`I3ejFdX>*cqWx=la)0d(Hq7T1J zu(W^4H|)@}V0+ANSiK0>Z7}}zRgfgd`oO>{u(e0u7{?pEfFdnl`fm_ltG~Z-dnQ=% znEe&K9}s}#r~yotRAO~#YDivIJPvcFB^R4(lXhS^f?#kTC^ZrhUN>Y*globWl~j5s z<)F}M_?f>N+k*h6){q~^&I%7Uejw&oiTRb*hJcp6f&DDq-r)VCH&=?iZhPpXx$?K* zhQtj#I2W-t#pK#J^`g-i?H8vG?cZuRDF{RhUrlQ%YW>;zrRhod%@z*g33C*apnwjR7 zC`aNVEDa1H>tiGig%UFhMb=9ESTLmyq>YfQ&JUXHb8I!GUQgj~aziK?@3$C0cpmc^ChI_ZYc*)Z33*@0y&kbVj7ty^-YoEwneuf%Vx z&yuy-a-_NPpC~J*R~JsNGVRe|ubf^Zm(*e{ah5q5e+pl@1wo?Y91Oh>;jmSB#8fv{ z$?~dkAHXe%iX}liV99IsWdqK*Epn`w>>tNFT4suC16utexNt`DBym2Ic}9N)eo+%w zt<_-`omfv4IFqZ#6-4lvu*iThV@ZYa0q#1ZU(f&s{~fxO(|dA;UhH^rP=J{qiXCD% zOk4Uv?9qFnfG}{ou(qNCtL=snTz#1->Pf5o!g{}Xs~TomANNRzN?i9m5}GadzUdL6HsVl?gT>={^% zU+|gNZ>~hpJ3Cr{p*LIoP*o0)%I2++yxOHGijMlxbzl0H7Obl-jz-X(kae`baR>XL zNK{;9$3`8~Bb&o4G5*zXj6KA-X8~?=;r%2mP%yl}X05-W^dC@23jsif%v*U(h2{AZ zYj|eN^R7(!TUZ_?ofqlR;?7>Vs0yL;EAIhQ?RqX;D>X#dxx_{VaBua2k;N;Wfat)D zKr?02W@;eE6Ku-y))(Z@ln*mimKVwCDwbZB<7Y-uIeY1OSg*iu4Ci1&2L{d#jHmWs zZ4D4mF_gaV6ChQN(Q66m7B=3%^)*rRwi`hNam3j}l<^xQ3HC4-O?d2|sP=I~pShC1 z_kr{n)4`7Lpu9zJM-ZaBzy+FJ`i<(IA};N%#kFT(RlzY`8wG^Y^N8gHbSfq*isViC z>;cA9xcwJ_JBl67Aa7KDqxkX z0>ddJ4zH?q5zox8#7om%gQ~U_PGb;QW@*@KCYUzIp2JqC&B ze?(-tc#4PKiZ=DaPQcm^d?MG0!1EybWgYg~Qw{Sr1~i-PKfCV^{Meq_q}zgD7`EOt`77=P z<2D+dY9s{NCT|AGvc<;pd3d@nt8lY<>wTmZ-D1$uL5}e4_SWg&P|`LZt|yDNTntwDUPmg$q+le}KEacr^wg9tK=4%NJv@8s37Z zceJt9_KioWuY=NwJ>u2)`vyd8bS^{WXDW*?7feHkt{$)s}2RPA&$9 zVnu9Z6vnY~xPq6!p?(nzRb>!Y@5n{jZX`(VR(NNf02AJN$k;3cEjPSc#FB-T;ic-X z2rPsQHIH?)x8M1plA0oKZ3H;h@eKHNx`iCj$C}FbTfkeNto@g~+&5?I)BpQFXJKu; zTZGpvOaos;0Up?F>`kV#?9yd4206}I8bAbUUu&*B7k-9FE&G6q!N3zn$^xw%lC&_n z;9~6gVPKAkm;SwxlnCFU8vzY?4R_?<8Us%2U{|osQ<%~}`4Rz%p<2EN&^`F*PqCMa z=c1Qo)WB@%TPHZiW@E1+Y}j*scn<^9f~DWbuile$$jHT@9zO{)x?B^dWI;9}{w@U{ zh?6c@zWP+U&}xD<85OrWyb!rT5&;Yt7slGedJuhEgQiPQvo+(HyA>N2F#cdfL6*$6tVQ{Ib zL3;#BRk==ZTvff8rsmV_g~8JvApwhX5;5Z4KHt8;HAC1V+bb9OgITLV*_5z#Z0x<7n|QFi&-1 z{zq#EcvT7>V)7{<$z9o_HzP4}65#Uy@@8Q;{GA&#GN^UMTI(>9f&$^KhjHEE)}#1A zrs6@30LmbF!c>TMmL|zO8Qy*ujDrmP|{%86%r7 zEAyS(P>=Lt4g0dAh{)P<(CW$>tmI{-8n0m;T4b)|&Wg2rk@F^7qYyz$@XQBvSCAm) zi8ImFjNCd?^@smnSE<~IZxfUXwIk^->W&Z@K#DkbW5Zni=B0BRYJ#07lcX5BVrI)C z(lGOtaHC@KQxo-?!S|R8WMs8+MK8l=?_FZ*}R7a z8J-r&h*yumW`Z+L2e52m-nDUNL1R?bi^!6H+=wqXas$7CyxUCN07lq>yGHM}|3Bj1 z20pIhy8G8k*Y?URTp2bXh>AtJNu^j#q@V;VC_&i5sGxud3J6fZN&KgB;wBDA;3Nj@ zt^|9#zK+|NyghD0@=x3J$qO_k3L${CwvlYp7{4@N1IFfk*D}U01msse-`~vL)k?O( zBu-_NBgDGog|0^*v<9H_3OX}=?+lc|fpZQo55#DHgXrsVW+ z%^C}prVuglbjRm32jCM%4mIdGd{0_edRXKCQpczXe9fY(sU^(pQ?O}>z5BBap&Gse z(j1TRHLt-~*b2d2>vl_ca&(F)U@UPntv7Osb)mcX8r;{Sn$I<+zhwblK{EP6g_jH` znu_XnaKE<54;v8PuWrR{r-F;x(Av;ymL@1!x1#F}3TWoz(#|kTfC}WLjOitt=0HB6 zn8pIM8sMmt2@5h}-+eYfRWJmfu|u#rea~$3MRjJGyl#Pg-k3*hYCZHn z32SZ_7`qz8H`D2MGTJF;$jWmA&(-d)78O)|OZ$Cc<5<_J z#2>%5ER=7C4FL+o)imxn@5P0#u z47aAj~FzcFlJn|cUGoM4nk5%M;%j7qifTwVRXS8*<}#YK`t(&2>fN8{U0_1Ak_)IHlie~w zh9xF=xeyRFoxifpyZH0Cp=8ft2Jv_ zp`Y*V06Yhu=EF>Y>JGQ6bAz60qea8`{C4nIkoo@@Oo3$0TuJ)Zr;+PFWQe@)Cj!uP z7jC;J1`gYt_`%cekijbejgZL=mTh>Qjpw`3?VdnmT6V2WXX=F2nW`9PjN8|6ILxQnZV^jy^xd}Q`Y3IgV2#HVsB?GoQre$K4Ao=Ye z$tdh5nfY44zj#`+sHi#sJ!Ot z7k9CV!O89@)|b{%HE62Me3^l;#GkP{S=KWZK41q~BR>ErB&MeWBoX{I<3yxJ#oR@W zU{Z&}O58?_-kzuZ>A33l(_fmdMHy{m{Sog{-4?I)dxyGyuPI2YG{#R$MP>jQ-i10Z zo&)c;aMF9CdzZ#IZO+WR@RoYgob(4j2jT*GW>l*=8C|{Y2f~nQPbM_CnxeWezm4h& zzYQMmHhd6y^l1%dJ2zOS$o!rm36UBFS*Dkb76UU{NU9p*Th0Wv72b?SGsGF-EyJ7$ zWq%acAA~qAPFS=Vvy2%iSI4k7qrLNkP*gHxV1{;tFy=Z>24<6^Y6Hn>>dV?f6>rXA z?@lm!0oBY8pG873c)4MZ3lj}A-cz7dmYqN?P`Tadhgd*`6}wxcSzm?)=Js5qlHZOns~!agIyD3pEg~$62a8!+_INJ-s-nw`12hzAv6i6 zPx%WwziVKVmp+@W)qk+7-^Y^ooETT}aLkBHd7|n2?ait`rS3LX2Pg6?E4d91Ks(Wa zpEfzN)Z57+yfdB@nb*33ZKf9j4$B}b%}-_)Lp6|}JLOPuHUj`I1~FLr-yaa8bVdhw zAh*FWGh0JgKk-#%qvMU6#lRBSw;bN+@-J>le^fg%xekO8asf3ZFYX+;II5cPqsIL2 zOZ4N=H34>3no?&{YGAsi|AM+(JMVZgdDnlD9JshsIRkgC)(`(w;jUj%)Vx;Cz{N&W z#|;YO2VjB!QZSvM&;7C2`AI88o{198 zinM$t|3;?Ix{UYf2Cu8pyDcKLg}{l2_Hp_e3bP0f3Ms~ZlmDCJN*bSq-0VR9YgX{m z@xF3%9Z)H3dx)HYi}Xo>M+u?1fS;V$y6{VAXj!?`qvU_o5+Dx&?Q0%yWpI+tE$O~|~_o$8+yc7!U@N1tSH|K6HC9DMQ z=J8o~bCtVz5+V$DbCq>B|2N&G%_?tb#NE6EIIO$53gD`fbF2B$PL$E^W`Ov`I|1S& z9)slvun%Y7e2#K`{S6>-dzT#3-Q0k?dA+ej!P;fovs3P^or1KgTj4HZj+1&)Te+6} zs=BrAB19Ipy1RH-D8#u$97^e@wG)kgtb4vN5EGXS*X`}vOJ}NZHplqYEqe_NgmTvW zu4P*jn@1}jhugHhyUANOILXQ*7T+rT=y`Qd-0@y5EFFGhrQ0>g=USw3)T^&;XR$F` z==P_{R-mdTYO2Dxjp15`*q;@unS*PF1J`l~PA<3SX6aXC<41NE$AgEWc?b&zZ?)S! z#eO!muHU_LveHwQKpeMs-Z1v}>?Z?<@osPa-MGHRf|>pBBsJ=u1{}n4ba{_1d{vCC zb&3xNMHJ(0xqIhRGzf@Q$@7($WYfCz8`VG8)c-_KKgR#Jx?Z77Ic2I8yI;j|03gcb z9e(uq-r?)7g_Vm$!KCx!go*koJvasc4RTH2(Tql1AHp46k30BMQ4%n}D;f*T0r$?u zN>4ckRBS{uy=K{9fEqOz`36?yK1=4nZmg%>ZqIF+j-ghvVXCxy5`8ZXsQ_Q|etF)%gAO8Nv9STS~y>4u?D8GszD5X@`(5 z3aQ=1rnNjjEu-mOK`ZjpY6S@&tyw`DJESvkxbdkPpvA{cV`?H+#M{HG&RX#RX>{_h z%Ku6z5z3g$^u(uc1biAeV|D)-cEF}1?!8ZJ8V((hGj@-bK*YMoUjn(I&0wOjXs!;X zRAUK)T)AKUJ`hwvs_w8J{Z%aqH zZ_S5a2|k1^CA7E_t2T3iZK<9-M|o;s!!xLc%cLK}ZrK%`m|4+j?kV`f{`$;ZxCLek z19raNXqI!naW&d?yDeb2E#q6g@Hk%2s`O|0B7ldVs?6U=Z>4EXX@bi`!TK05C8yVG zdiWI8>2$*y#w{KH==9mhzK^u=( zzIsgg55FbA?dgJSdECSufty$kFe$w4nV$v390R^_`}VV?HS^bCY>Ckq%OQzY8*0(g zJ}DZ=oMgj+|Fv=j)1m)JN-0A#8W`ZBUHZjId73hV{`J$ODR*8pP^8i#?M>Qzz{cTD z1=})v2Bqc+Uq3+%=OMIArbjIhQOX>kS(&eH4;gj)B4!z?`T@hg)Tm%|F*-2a=)m4p zjyIkyxCnVut$`K*YNQ|K)@{2LATVQYTC|nF9mW`t?)!y05EYU_4`|0Jl;4CblRi$7lO**TwAp zZBHDl|E-u_PY}Q0v|sbK0L!oNDbwZqlUKIO?{I`%uCYvhVWy!lj_C}E=H&EQ-eBtB zWbY~WM~}%KYxB}<04qv8SD4yf6iQ9n6i-Ftn+o)nJk8pIUbym%hTDSS)0)2f{aIu5 z}(yN`%$)7Rb@&eNTlEQqA7?)~i~WkN>4OHBomJ|C^g4 zkp0?%P%h?_X27C2kd&#n+{TU1Qy-9H_IpvFgb%{x8#(bQ`Eh2bEZ2cFB(E~s@cM6| z4bN!wjG_FEXN4}edm$<}d$PQXOGJcMQOT`|^%e31{(E3F{y(Y?-A_oFOoTGR&V!>1 zT%-cuP=Pms5&6*Q0<9`=lL{y#VPHQGkzBImYO{BbJu96Ty@CF;?ZFDV(Dj*Md+6-9 z*&Z6KeZ)C+5X9RMcx<05@V1e1X5!Gn#`#-*(tEEcET9R~KwM|t016U~R*n9~Lw9`zxhDe)f-M#BaupGXDLa#FZQ0yM{ zjw`UcP0E|3dj&S3!eAX>!FI8^55w^m~U0vXI*OAP;SLHZA2R7W^o5w2#%F89iyGc9d?}XIL zrNz7bxv$5M>~QaTlh#G?NPMLn>lG7#Z=QRniDX3e#wyReNTHfn2~>5MxElt5s}z<-@#hR(_17S#KR$fYEhX{SB8KM)zkAousYKlgGgzf37b61Iii#MyullnM%PG42$a zth+dDXGpCLfak0@eg?Knf3Dd$J6B2R)#YThx#b&`G?WmAVR3I?dfktXM~wS2fU)NQa)#c0u|oyuE>2am;xG{EHRHiE4_LsVEw3 zvrpP=`T@HURV?83GH?ebi_+s%;n0Mx)0oOIm^I-S;Ng$2s<>_?QZr)`@-Opg_>R$C zJLTKzKO1xhziIVH@3DnD#Wyq+rENJ;5%s0%nT&JIMMm7BQqH9wc&k?67*8c4XU_c~ z9T;F?ZP1dkW3-`8GD^+P;JN9FZyLf>v;Asr`Y}F06@8Rz&;-_kMd}#;C|~aNM68=G z=Jk}2G8N*Oyt>x{vQ*`6Gfw3kLIY^*!CCcB@R zaU6z>6~XDF4nF8=2-M5>=c|`pkvPHI3U64+fub8$A`D03v<(gpjy$6uuBON@{uZre zu=h#^R}|P30Zkilbenexd8NS2!iz@Ob(sMKMS%aeEN{qSKhd#C@ylD6*RZtZb(z82 zmj{aqGWR71fH&LLO z-0hT2&(+l2*A-c~N*y2`9;+}m9hlYNTgQuQp{Mr#HbKW`q+K<%ZDegLoW7n}f*K}c z2P+<2*c%V)OEyKkB163Rs#?xJ^H(*>o;SIJ>5==Lz2BMr?hALSuM8KnDr~T3CaKc& zTE;V&o0pF{ct04}3^zH4*dW40M7#WIBGVnY^U@bE&NZrlc@CY{Fe9mzzY1n%GwLRg zuTd7{SCOwrZvp|{)85{6v+dzuQ%sno*l9r$$xA~{dI#`PW9@MV-~I1{a@p~BB}FwJ zOt?TZJ^)s>QOvA`S>}C3%w<12W_g3e(VyI(ff#7;2!{J$g5hhejTL zlznLCL31T<*kD2Znu^ZX(TGW%MthR}4p>=1UX389G34(wlo1lvNX;&YF6Zllt84n; zcu^+?mC92G!d%+hSsXVOHT(;I?=yz^FIIQm7>Lc5QDXB$5}Ose@uwpF0b+B)CxSsN zojyVc52`Zs!$PM%BTYrgUQL+o)`=L3UFD4&&oy0lRjZC0Cn##f+NE_+pMq=m+l=KlH`vc|+r0?=<@HC$W#4 z2NbN`=>^ol=>D*eC^s_8dvf1TjJQ$}e|klH<$N>NcEh%1>2p|bAE^p$=|Qmt;W7um z2jF@BgZR#f!LOVObn%^h$Z-PJBc;Gj9GKR`y8>1n&^5!l zQy90@E#u=aAHi($exG`EvNzcMwA=Fy3VDZfkKOu)l5BID&r(dd=hfRg{i?I;GV}kA z>~QE{U0H1YXT6&g$H?)%+Uk9tuzPLZO%a~M-c2Qg?*kw8F-JWWMzQ>tc-PKr#MdE1#ub{04dWAbOY z%TnGYc3;ZCw5ftI9-Mxq{IUCB0umZ#RCg|kT_yQN3yj9`#){i!kRZSA49k< zS#p*6oFP*J(#qT)G80T91_m5`B*aF^xYqVpdh7X3rO(2jz|+WOHKe3J>9!iV{v5TpTr+SG7K=rCmSBOj>TnTn z+BxCPO>(hrMUx{I7aZvJem;~qD~YcD*xQs$R>cz6;u5;Hu=2NFCbhpP^jJ{smTa|K z5|H&eq!p~v4GFs<(A^^>XL$=-hX*H)C%=hDO_FK|Sp=iNXRXD5qdZsy{l zKrSOAMPj-eU)i7;HNI=X@ViQCc6ONQ)kv`J8@SUhUuD zEF93Vi}yPzmaeBCa(hccd*57PK->U`8&d}+dm9pARw(OMc0CtgSzdRr>q*HTTkWT6 z`pgnTBh+bgm$y$Vb(hypbC=JV7WV7Uu6)+3kGad|6GoG}gDVZ0%iPMxEv?(T9dCX& zDt0%fQFkp(#D|=&2hn)j;Vi=R66`Gg+JfXE%IAGTu}M@(3UA}hYX7W z^o`!F3;fzCm4l?gKlDQWHIjP|?$Ev)y&JaIt?&BJ_^L*O&re;w{DRQV4zPg2hp%Uw z|8t{P?5P|G*3+*+)ejvcD8l&d+=_9U4U7;UD(Tu8PnFkYy0)5n^7qrncgg}HmRlQN zv}|*Go1SxfJ6`ak*ZT7(LHd^G{jy6_uW?4~3cvHLLcjfFlEh$dc`>!CFf~}{|9F82 z)I6z>t3!pb-e@e&u9ezYqV4%a(+i0fK@v-}JXe?Q+7@5s7zix>1A1!BoONy5ZktT| z7f|^Pe(mjk=edQcBZafy2=ULW_G@qOJ8KGoMxe9;=p|&gr!o|&_y_V-~n{zKPkk8wWV8FN9@&aHCgNEmr0vJ#8ZXiG6M{oA$ zf3z?)Tu3g_O>_{v{u;mYiI#FeRJPxKw(aLk zKk{XIpJ+J;U`?Oj1B$|lwjw`zdk*r?`pvHT=tsX~^7fk!HGRflgl>M$$a8u&qQ9H| zX_2OuKEWp)(6DK;=qO#5Ja}#H3z)qSt?4<_%X#SYe<5=x?B5jHaD+tEuRRHR8Vbs- z5oHsyc~P2Zxsb4abf45TIt2NrthUUwZ@%hxemHmosHX6j0)D5kql!VGdBdq0`T4zSf=fHCK8}+ zdI21nuo~oV_p3hccLnGZR0;uI;#ZxNAQr;pEQU%c!bi~!M^r>cQ&|!x#2ld$W`IXP zo?lgCY7(wngc*ysB8HUTdA^2HSm&t08Z=O+&B&RVXgh})jeb*C5no9IFqlI)pHvvy zYWffByvJ|;Kq2}UL?}1IBp5bundQ8I%RZZEvMg4fCy(s-k!J{?=D}BO!yw`U@N+}x zpqaP0f5LTp_Y!8O)cYq*(P|iLY87iVfTKm?obtN}pAXr&AWH@SI zwoQi>ynP%OMuhsU9}prX7$r&JsL$lMUjBrdjWS^(<}?)Y(c9qmcAmDKEoZ6cSQcnL zX*jeev^stu-1Smw$azq+24^~EuU6vC=R<3`qQpT|oa8WhF5F*$Zql_&8s-~;eWA+3 zH5-k^EB_Bwn%Zrhds0J1Cs=28Kk6~+8%DhftzLM*wtk!{1N;3L&}J1VV{eMQnEy`U z0{#s&7CQQ6vi_K<{FS5bBe)9tRAjZQ{@ncCS-2fVC-nlzYd>o^v@f(pO3zEFOi^{8 z+q-7=8ez_3Qy+CoE$G@O6)q=#OnuPfLHPzmkCdT9=Si@2bCIfs9&4qpyp%dHu4WAp z#Oz!i^v`!rvXsF5^h!KJaJ7WJmPpqtY6bi=a2-D(mB{KB3>2b&l?VDj%XY8jMXx38 zwd~}4`wRP4E(yv**W;F_WG1&?JIhc0rQ40Zm8|id)1VL35k%F=FFPJ5tG^uf=7y7B zj(Bq;UC-q6OSb=c-$#qG`1d}f&u?W?V|1e)f`J(j3`1u80e|Ka2Yvl!9pWvsVpzDMD%q-{%8v%p;y|CY? z&nss#>PneGqvl2CZhYUSfBu~!B33ueGl-zx9>raaY{4H2!% z>cO5x{MBsqok=+y4HSsw*g$N5!uBVkpROm5;y*jS`piu`!T7RVVt8Z^K@jqJ1U5S^ ze-NS({y0{BVvx|}~aN=Xm<~(fU2i>Ah`z;p5e3If4i& z@(O9x4Z4Wy@;D-!(>ROCaCOt=X zC-3Y)t6|%0Z2kjN*r9Wv@+rUUlkOw`SRdZmfk?j6iLaCq<35tSuV`mS>Hw*KQp)Y^ z4mT9+>_}Y1LQds+w|9XInFOKlbI|nMWGqKJ^;!P6^Pi2^#X1FJpu*=)x|LX7s3!Em zV<*)ad{(!wi&Zh}_7I^*`G2%JP=QJi^VYw)x$<|RKA1P+UsS?Rc<|(G6uj>5(`OhK zr|!Ez#C+Y+{%QV?FddQOq5b~Gpyf!VHmEb3-gz`?W++(2{GUoUp>=SK#sc%h8o{BY{Cxqe8yl$hZjDbi#IC#{6>B+ zIk_MTohQ++I}wTSM$D0U;L;C)#80a(gEynqve=zMM;6uRh}c*x;uuM&=n_ zM!g3Q{x3}KKGG-z|6y>pWeS49?e!WW@KfZ=9PpazE^^^?9Sx>hbb!ir;x~6^2Nce-$LyT?ji*_5*a0cvR z*v-;T+wILQJmQSW`JBNQF9G9m$p*6{(v$x)#xtL0EA6Q{Y2k^ zlqpV(VII(DlOMg#eWbfYkAAelcl!M1jTiW>1sBBoE=Ub=f6OvNpVWZ~sr?fYHynmF z(BhY!7VwXFmB*9p<1iF|%PnMC^u_99BRG8B{W!`3!D?dlG*^i)|<%E^A*9+*RTa1iy z^#5O%ot?V$=4{Tq1SLtv?Cy(JpvUJ(C>dNOuvR@!uEckwS5lEY3Q)rAtmKQ0~ zXTK~Dpa__e7yo8ogmc_jp3jXG(E1zP2w#2%B^+)f#p#R!?`^peOo$tfW=BWt$lDx0 z;zh`3$MU?H7Q!@(9Z?%CKgQV11M|TFRmiZWfRuU?XVb4(R|H_+tIY$$MBMfR~O z`f4(zh#gZ!m%@~5dqhPydjsEEMel^?(A3JU2qASkDdg^-RYlKJnRP=8gfWIwK$s0Q^jOGxe0hBQZxXg?g@%H9x z965KvA8$OF@t;SYFB=I^`e(D4Zj}T$#7KqZ{^aJ^{aFccjQyZ?$DH()CR7lq(wtt9 z`YauIw2orc=cu>dXf9q5r zuRg{r)tqnXk)74Q6%!7in`7r9%ShxYD+<`nmyw)K60s_DpdwSrbK>hf6}pN#5UW{x zj}ptp&qi&L)4|SjeWa#1W?e9__bQ+8qqn@3wdX~_{8DT1?Vo@LCz`5{O@NEIa{_ue zi?q1CRcFJg<1yFW z-ujQjxcqY8KyQ@nv%UFPFAo^A2*bk!qR;?L;RMUS9Kp8y`If!8}M&b{QGOedh@0G=JPMGTmB`Hf{5xXd z#VmMP_N2&mSP{6L9E*#C%SSkvA`er95b_v*FW6a=)D}`xaBqUj@+=EK=|}Gv!@~2k z&I-9Mviu9HhVfVk$0`1wKpjpZ`T-~tncq|3w&N?Q?!c#D#go8^g? zoK#ChH4DYW5hETh=L{>;0-ngqw7|?~Je0#T>PuF(Jzgp9PS(dxOtgJ`*n7N^Q<~N} zKV#Uk-#qrVXXc9s)c~?HuK_DOy>%y2KQgPbKhZiFCt9BDq%TvbJM%$IfMfY9#KOiu zE49<@y&hG61_r@Z)beppQtHW4b1O4PEN!jxJ?F6;al@aG^Boem7^)yhj}l;D^xWfwSkyoID`6S&;-MzKzT{L$j&3jrBr}bt{s_=kd^PiKSmjEFB9AYV~azIG$fW z+le_6OCK2#OUZYY1JMH^a;_vSM32Hku*YNnWN&TF3U+r?u1zfYIBR}iv$LbKB0jXhyz~=?$eq7EK6D2mB`#Y(x?I=h z2bNF+6>$(^_&2(9fCBNMFH;T6aGie{AKGnR`Au`@zZ4&GvvuT(bZs@TbB)j%v(`H} z(Z=W6;$F5|Z4JXwiGL8*J2~d#FOjJH$}_yFS(Ep!>&1a_!UKg12F7WBbIG&mj)8Hd zq}Fd#s)AJcCZ(dJ8qC{jQq_BvS4L{di%K<++WopxQ}y$JW1v`v+*X- z=Xnk%3r6-wndb&4w_a_Z59OZC<|31Mt;4yDr)pN5vzbft__tw4Xoa`_oV7Kp-)kPz zq4j`jib@Y?I^?ac;dSmMRmwlB_VqqI_O&%T%=@N8$&#a9-*4By^nF-Y`;DnRn0B=v z2UCENQW{`EKtUl}E5}Ini=> za?LKSuI{Wn9NOZ&#=icV!<95YRJjYi%?a`G-pXBEB(;x&1~t#JFaDqs+bXwJ9^wAN zHSXmr;=z{1W9cUjXfLCGrOBzuxre;LP``oeC!&}yL0lz5n<^bL!=K4wZ!c$1y5Rd^xxyS>2vTW@zLqb_6??hk4MAH?`# z4;ek-?EzwrRqkDQAb7hmwWBnNvH1cwi8-m~OlW}3#jCF?hC*znHv6wcAAnb+%&4w> zJmhVLm|G03y-iSewIPF`e!Oy3njG4<;b7>o(S1sJPpD73=u-x>1AS>v<(uA- z)N7MNM>ZS@?IJFW#Q+ydGO_&^7ifCFtvn1ZUY#6zZNqSA|EOMp7G176Q2C^HKy@70 za3Hi|RL{Wd3tZ_?QoNb2<$9&c!>Q*+k?al(9x>d;w>%8|O&x9#*JwlzjbifjMQuIamR z3ENiV>_WY}z>BK7x*;Op69=_Fw33)`=ksyb@3K`Hc&@(6uU%5N`^uX?9Qa$fPp0Ki zJXPpz@}5i$MpCbp#9wgZuk0>9n7HPMw<-So?$lse@l$pEi7SS0-2hD4?VEOe^2(a0 zLGOZ(&HBz@M~H)5bsQS(JS(_65v(}SDm{TX#e#zUeSX=Jy3IH5<%|x^x@)~j@sv}y z^48bPYt~=k2l-E`EwkSKS$>%{@Azw}S2cZ4H^xdg9HgK2^&R_Yp;Vchoqz88XJU5~ zkKoxgD^*yzTcfe92*&i26AKH(Vb7er9xi!y4SZ4tpOmTiO4Ql#s}PZ2XFDe(VUR(c zc;8q|*xsO`ExQK)IT(N3PgOH~mFafLUej`*si|4>Zp7QC7J>jKB_Hqj1~>Z0!0cHR?fw%Z&FuIVE-0^bp} zVezhU$UTIQ4MoIp!gR>J*VYFhbEr=M&C;)5eu5CiJ@YB$8ZUU#J^Ab@SwHHZLS1`F<9C{IQbuUZlDqx4GTKc76{pt7$~X zoV7|uQssD_lw3}Z=XKf>QDzbb2mT}wRVP~Z*1bt9Gt~;ejrygQ zc3`<|z}x26{> zxMXxQ-+*fvuQoJ*b+hbY}R4|)Te)%e9dWj-5`H+Xx zfwqR%dyl?%xL~+o;Y<7(PDUm_s9$ET$`!b%ywwYz)3Yf;z+IKB++m+K*jL4?y%p#% z@$RMSMo15+7aR2)<=O51ZzW4jvM=7K(p{HP|Z_PR%Jo934l zRt_eeZ*d~VXtMF{MIxk~NY*{owGwb!J5Ta(@n;#0!0;;)g&-cZ!s~##3LfIS-C~Zfp z>3f(@hclNO06R}V8n~joQd*N3Gv8Wsf_RI!*Fwb-zxMBw6VbNa-mTthEQrn62n%1) zu-6VLRQxr?L#gLV80gau5g>chQTm|llZ87EK?}+2QpU%Codw`iu|f$sn|@^G1;&!5 z2ab6TGgaMV-$(WSr{>9TGl>-h=DwShUFr+$c|&7qY8 zyne>MR(AmYAw4}5E9a@-5>>xigw@TYeAu9`Ta+p9uoL5BL#Rta`%jI;p`#OG;XVyJMq*hYiCijsi z+QD%q=Hv-3$$cV5ZM4pj@K{C`y?`OB>w9%MnFeHv?K0t4s*Bfl6g{Ufz`h*sMzX z2)X_bRfue>^$WpfZU=US@0`g)y&h=tyS#fV%4ml($k+P4r3zGniI(sg+12hNR0n|+ zNU1~*^`exu0{Eobk4_cP;I7>D1rSfVm}IKgk28%u8-rJzKi=&gl48XZ)Y{A~q7IDo z$TMC_mpmKa(Ib8Cz0{i;9LL`6$5QEWS|c1GANSYwJEE6Ucc4=ZM(TDX8zOi7hyXmd z|56p7AL{zq`4>7}KR*A$aM%CO1Ud3S*W-b|gzrT7GAc5U5O!#ujZKQ-*dDsE8M zGE)JxG(tX&tdjUJGnJivxJs023xUn6@U>(E-%9*#+FrS$ z?tpvwlVnS(VKvtig436{m5Ig=ZzSpA7@0X`?9!~i%XjYPjo~t4bUwm=GV0(a+v_(` zM8#ALeVuKp5ACk&zwL9RN)c#;ahPCd-A6R*KI`85`z+HCQS_0%)UI)cbL5}%9*2Ld zwq3am9`X)W;!;8mLLb%JfF-J>2B}v?m>uvl=XO31 zO9Ucb^T(O!m4MZODAc3@-j!je2&=o5`P}GW)mYW60KWIyM(CUl=EUe62>S_x4wFon z3JoypC_xYAqhv%EdZ{Uk3}AkHatJR=Wbo4{e}CoQ2bC`n+r<-5nA36UD$L+aA zudm>%zax=}^9RM9do~Z%T^jCuZ}Q!Y|DFOVg&MRM@_~ZDGHBhN9a{gIrdQ^Jp}I?* zF74$(XsErO6?(siKf0oG@hNI&68EZ^_NeDDVK@hS>?q6JMKwY46C=sL9Z5Em^tPFn za4;sXbL!g9qmoC!u~1xhIRO0!51BQ}u_hEuQOX@z5|&I|MvAabjp#VTmN8m~9XBDE zN*b*OPbfFJYedEE#2 z<^|Ms0>0)7XcD{aGMvn{u_eizfB6l=k3I4)6C?Uu+=)ox@HyPmb$7w0U8x;x%bO55 zn4cmT1f-0~xHh%Pzif}DW^-=a1sCGKCT!QcYx>xZM7)r@3v#s(FKRIKW@w*vDpz!E z&VFy#i`uD1de%H7iFyUk&4*a^WOp*+ry?qw>xM)=*FPe;pm*e-KQCgvo+d-1)b0Ka z-@AXWYxEcco#)1fin`{VuRWgKA7*${uo+0F($@y$#$4*`)W`8v?IJ}cl7{|FAmmM* zqW12+ILvdiUwfB#pzh6^|2k*hJnn5?_==nutVsm!i_M`S z&AOA;`OW%>&%i^I{`tO;?TZ1u$JoMZ{BkFGYna>d+H`l9?xbqqrV{SHF;m7+W1G1V-Qhy@V0McReQFD2x99QlRKeW?u4%kt#i2dx(`dDLgqw?{!|sf0kvIc zB|lXVf0RXv1p6*inJ|tQt#`=f%k}f_Be;&;M}CLgy!R>OCR0dgpZf?ZDYJ%q?_T#2 z$}!7?)>%XVCOa+nad}JXg_7dO&@_qX!eZCP;!R%JU1BPL>bet_Y6v0p>mf)3a5mD> zT4t7}(C(fs?nOG2Z0Jyza(h0^G?S0bp3&GW5;kY<4Haab)8+tu*bwG>c}R%#=5{M` zw$e1AvrY1O)tj+H`_?@D!mQrZkS{ zlppos#sYMYO&Wu~a~F&@4}d$f!|+{ygY%a1G#g8v;jOm_GSK}sUxqB4>j{$QO}M>D z*K|65{jXU6NtSA9sA(vN^>qQ(U$(e6-P{}6lBI>7i`RNBhp>8dJEwM?#~7yCDp=r` zJ&@Uy<)fXBo_U9x(?KkW|40}YMzP^by zA>Df~+0#jY)Xv!43=0$^>mODg)>EVnXtam8mFC*by`C+oQp2&kr^4&Z4F-ez37_$6 zuCfE-5@qlk5#&^CqHvou%ggVI%+=~vy_s%UkKUU;m#=;hCYPeEu&$1;wg*+1m5HGA zFoBZp^Y+)JZ|>7HWf$J!sUnttQJ`Q%ZGx)MlOiisB(7nVoeUQL>K@gS-@3sB74Z2& zZ@oRnNC>%KN%#% zpPLYWd8l|#;_@Tfuuz1!i$6Cx{`~gh4RtFy4S(xn8C?tztO}_%h+lQ{r@VtB^)Xz3 zmwL6tBSycrM_1@c;UFp!R~md=3O>kATzZ(vyee_!@U8uWQPUqMW@s#u-uFC6(e^fC zZjRvxo)MU^&nQNqeO|OR;~3z#)vR8EhgujcpnfL8jq{_{v+&O;B1*A+~ZrK;wbg(Y%MZe!gAWR!ggIJ`m*KE}KwR8H2A6;HwE^ptF zEtNg*?-+Q|L)qfgF?{n1f25Ffu1$DU!1Isg}5Kc?VV^B zWjm+LUbAq4Y{OFb-Yu!YGZOeY+OSDe&S@&Bno{M*p(oy%d0I{U)Nt${pY?eg=$?RYlK{idw+0HV0gyOF(+H z?5rQ!5+wi}HBN-Er4r!b)FVpJVQ*{vCD(g`Ym1(g+xr!F_L@nP(1u@jinXD#$QVEF zy?cxu)HmpO&w88qVZq+pR{W$##KnW|z5BJE&tksfAmG$R&L!H+059^MiodYCZ--O- zl(wVXyMf`xr^P!GEk|HcECUn!WR7(oO=XTKVIqrg!^B4!iSb}}LiYT;_U3aR%I)*$ zPOPSnr*gIw&{uGbZ7U~OZ!KDCy);sH`LYWZOjT@!pPu`l|JIVOCIa`0V(+*xGdy97`d8Tk6S@;!0M5res}=U}|w>^HOgEcw8lL+;{#5t|~o z2tFPm*5dm#scV0GIhoM3p2!fjaBG>Y?qu{~OTSSlgmMu2EaAoNz25+~aOFK8R-B1f zshmhcNZP(kk+;sv6z>J`7pS{^nQ=*C#r-z!#HfDRxi3&MadjyE!ccJ#RTjBJ2ddb6 z-=mw#vJ%6>pO4?s^ykp|xB?hJJV`&`&$0>0`dSM|Je-;~rh-kO`p?6zm zEhB_j$g;tok^UCG6&g@-F}@S{L<0-oA5H&!{Eg<%9DLAU;{qOFK$vmSk6$Ah8I8(F zEEzGwITVSFfep+WF_18f8Sp4$$nq!`u)YOX+sNva+gnha zBHcoQ_cF$tQ?p_b^TIyY6C>P&Z6Lrj-Kh7wxrYwjZiUOAE|!bb1W0JBHU&uP|Vjnga31-PBMCER=fQnYgr6-_U$(qJ&GrdYxEehHP*w zn$9kM6$_-n?`}}jq180474tuN<8673vk_qN!*bZ7HW*U`o&iN#mT0xf68|FQlzXcO zBbwixm{91YVaO&JQZ^oV)d8kx4a7f}yk@SaD*l~@4KqY4CP5jkDdyB)Sn}l76?517ks`nBk`$Xci%_S+B*I0k-F3fcB~G}gkz;XXl~iBPZlY}) zc5HZ!PvJK!Ujz3&LPpa)byG)T91rPw3e8qqRtMjV-jj$J)nYh{|sHV}VI>@cd0l0@`Zi8e>1 zXQ97ao+w%j^X$;)ND=c5=5)5trnADCI{vnOCVKes`kVu4EIe%q+h?LT<3Gyvxgp!y z3H7<{t@|9cea5uKAdSj7TcTYB_yBdk>Kj-tgjbPaE^=#oLtI$lFmL1E75IzH&=iNF zP{h2oW{7M|Wlr_$=aO5GcEpQzw3}+!qWe@UuJ1QvkLUd9vnX=6(JfvE8{MWre4R@y zb7@DZ?asvRGsOrAW;M7kaj`sV4Qy=a{(FIgvT3&hiO(B+rvYHw{qAvAZ~&EGcD)2g zZ?h}*93?$+yooY5nnVbUA}d8a#ZNs3UmCe_T4H)A&UQt!CsYISx1JNrtdLz|C+<=H zM=c-C0b1GXtl?S%zik5xD3Xz_c`|b5h>UE{myv8*oJ|E0$;Vc#>N&AlSsBTy)u~o0 z5^I}D(+n~kNo-rPGSSSPXmw`dgxwf1X8unocwKjiQIQnkulsbHER;;)G6qRX-Hgye zYaMxF@l; zEDFO|dsJOfbd+uetIi%a3fi(7kpl2JhgV$$J&*=VCkA=3#FfgzvR!(L$-=W}g7+A) z`*h+8-Pqj>U%y*ZBl2Q4?x0vQ`p;IYT4qK<(6pL>AI?-gv`lN51wl(%>yb)#<#?FD zjD>7#i7S-VqM@kE)o3nU6j2B+U5HW6aO{xX<>^p=iuh6E%g-5b z>ap3BFP(f=ZFkjWR9wriypANMV>Vcx1(?!Q2HbNT0E0a-4Lf3)6*P|3(*YzH)=Y-8 zRrB&i1`ieiiwtfP&F78hIoC>J2FU0>&GcG_6X;uF+IYe?A~2ot{K2wjWk!FZ`cpEV zK#Z*6%|nQC)jVS!F}hy}LgO(y1|cF5q4Z>q-_7n;lfUwa2lG)tZ?Ulfeu zjXCrfNr_P9=;!jKMyRq)eU`z|QUhXw6YSlk0v4@?q@ihIhHl+v16*e(BZKN|LERjL zWgsYZvQ;ZNZ#ANg1TAt#i4hpT!_vn#a~2JTP21Ddw&Bafw8Ho*8=eao0ulMLL?njG zA15EfR4DlvhVcuEnXZwK<`R`r@{t|F=#YP6`PhF^(Qx9Ttc;ukAUaU==arE`o05|U zN6Seo3Cn>ZkdJ|=EJE5GM^sW4si^{yqok(rDybR%qoihS(}=`0Q+c|`D3+3%hpp5k z^u45Jm89kdPURSJi1?I@*od^m&>Q82FrsmcxTILcXlXes(Z1_YAR4pMGMcyw3Agm5 ztnA`7r}mM-2~KCRE^mcq|1^hjwa7@!KvGgLE1;2PNZZI4)Y@_@KS9#0tl&(PA>MN0 znFhnW9VMO{nNtQoM{B-9xFJdWJ-7{o6v^qvceKk`T1cc4kMr6Mp$Z&VpsEZCo#=|@TL6?Lc)m)PUeoqKk^9nHnLs$Z$tuB2ZfaYJ`}vf%~U1+^6Z%fflYQ zoM(k-2k5NL7ouOcLR7N#EmWgp3DUO{qCxw4f;4P(&1Vs$S%06#e={6Z@6RLhx3S9> zr&-+qs)l&Fa6>v!qX>m*tiq`be$DMo6pc`*mS=H5BhO)Qti4PuEMNz^y{_B)RTR~8 zVT`eE!qKX{G3Rg-@;w71=P5*+pTmYLxe9Bf&4UDDLAHrI!-*!`1VIBgAIlN>hqnMf zMiOmD61oo|XyGF#+=bEbkHAi)PU37js4kg~(2EF+8!i<07UCWYB`#wEeCK@{-Q;ML zsaew+jW`ZB%0&|dY`Cn*?P-AtpnF*e!^k6O69>Jte8~S($!g^PCfqiqo#A+J(+9-X zWpY|zY#@p$?sz6pqbeE?@cqX&rOnijr(04^G?bNwSEbf^RkGH4BaRImHh5L0$x@q2 z{kEBjBMo42jM!dJke}}opxQvqpz2(~G4^^>UMtyNq2ESp`ZAMnJdW8hIPzfyTS3~qBO|6+o&(Do zb$GF?eRf2;2gq;I=m|6pONhWeYvIb65&Nt;-#)|b-F$PJ?{Yrd~%cQI=;lS~-lGHumko@Kut#+qY&rNR}<4VX@2aAnN6 zQY)~JO~4O{fTEZ0Y#kwD-{837)sWBILVwF3V)M_BP{;@n&TM10JZ;r#3{mj-UFH%gd(s8nn2NL>Nv2b0x z-QN=3bGk{pztkFc@{zGXBgX(D0v}mnvdk>1`StU}sf^2_vN2);+s;_+jn%{4?FSx> zMuMy`=G8bWD!NOIsHinu7Jpd_Hu3F4#p}dsE3M85F%y&JGeZZEBljN!qA>xb;K!uB zEV90`)u}YTvRffDW!uFWIP;9iuud~vv{Q$Z){xE`(UNKg%%vZdVr>S+Pp2vgq;>l3 z+fn2@W=RP-7JqK2c)hoyZ^yXewTYvAXNNs}XaAa~&qy-Qk-XNPCCycBx-d$)){SH3 z^~@1@J<3-`FLExNB@*iX3ZV%kW?_ov2cA!=yOVJ11l#c5d&nVG4JMmKMpEXNG&5CpVnJs)E|X4pZzm)DFL zJ?Ed3#|$5oEMVg?)9M13l`#)`S&tcWq4z8hw#bxWQs@&-j0@L{#crc1ZP*onWd`~3 z`;83)^k2{p=CHAbyF(g&iN?utkJ+xGA@VwcUkog?kZs_i_rS#B%hR%loy3KF5dC~s zWeD_zte-3x_?j!|y0J0g)JZ9my@R;3_6|6ar8KbXfBdcV4cHBA07Bb?R*)08}AbR@2%l>hOra2r3u}ilhwIsO8zp)#7ab#Z%)KxW(1==X1VkHR-ZNU5vgO=6HY`% zN-rAiFMAb#Su4)#Kf8Q9mcQ)JEhDr3GUVj`d^!0?ddrTMn!>B3CS&4Qs|+V1HTk-k zm4=+;%$J%-i-X6Onz6T&nv#^>W;oC=y&91KGxBe=ytFT@Rns|W?AAwG1WWqmVGH-cpl4JCQn%) zJhcD-U9-Y7S!*OGvdniLkW{s5pAnx$wWFqAD_xI(xL~}ro&+V<2%4gJsjs3)Ku*$QUf{a}`O4HO(USwzF zp%N;cWn4&sqB#Svf_0@PW@rga3$tIQ=5U~73e`D9vs&0h`O^|o?>ld}a+(i#}?k!iF9F zjf01{HHp(~ZtqipVp6!ODxQUWm4x zTZv%oMLy4*JgeW?k(H{s6%Xq?GDfy-G%HQf1GNu=MkPkGiykF*4I-A`lwE@uS$oK- zpj<~02*wsIMNZnVLvocR4XagZM>}F~uR%&yBVBIQ(d;U+RvLmmnpv3&V(fxLz6v@< zss`Q<;73iAKyA^qLSxwYFjv2mX6TGo%Ex%s@>EeFAXw~R4cD$gWTk2;QuPGa9=`B) z(lopFuqeBLJIh;*nTHY0=<{pM@`KyE9;m1B(in zdu4v~lb&6K2yNuKlqim^Y{|w`&36vgkX?|NkAy>B^C4Tm$H!M_VIBgXnbeMUJo!Hj zX4kr8nRU08ne~V4E=J=zS@dy(!6vq-Ei*e^Ra>Hst=P*xY)llYWF;b7>n*H6ypw8~ zF7m6zLy@bNr3Y~ThX8xYC}45;o23OOl(;q@Y^^y&3KQ4n!LGH3cLcxod0O}r*XCeP zT&sPaC2miAWM!e=t}Z~L(omn46tYVUl#F(soOQyR{r50I0|j-64grY2WFk+s2+Mpw zKO2_D_zyM7XT2kywV z7VitkS7?P8Id`TieTV!^UA2j(p)B#JG0{eZOUrxx4F?s=7cPg7xL)o8w|9iCPhhCP zPytWqT!O8WWwibV)|ptO4#wa+2Rd=dD1fgW0eG4LIGngv09$m7Kr3zQk(7f(XKg&0fUFsL6+&o}5K6hQpY%2oZZ0VQ>7o?f8*7 zb+e;*4+@4oi?G9-MfjbF{(_vII)s2W=dftXkZOhbFAb^n#A&ASYLpxDuL=E$f$)wA z0d}p{XRj;-1&K@LZ=;VE3upa_0RY+I5g-zm=Z<3pFq{Dhv~58^5M2AG#()5j)EkWm z$PfTm&(hzLo|7OaU zX%Rb?-EiAT+oc@N(s(qZrDUuX`NuB1vS7!0Q1J%P*Q5n)W&mvvVc)1s6>UK``v(QX z@s>uiUQ)OBq3j}#VRo}LqK!}mxuuZ<^rzV_kDS4xO}3}ZA%t1Y9G3O^Kdf&_^dj-g z%)oVfYm8!;cMlVPK5eS``8ZS*apYrV5tnF?~%=JXW?Hxt~5&LUmwM5~RA z0rmv+Eu&_s{x~zoi6BI6z~&K@=sfuUeEOErwJcZmG7ij+*Q~FB*(2XA1vl3kWou+r z>sb0$pliXDC|M_5^VAco`47{#9{f}2TXnFG(YJal`x}Oav&7WVC&Su5v!@Mz`q%c* zf@Nr^nP`&2Vr>ZNTT;@qCIqaAY97=qdQ&wguY!Sd0#)budNfbx^sRiLr@a%PFBt{2 z6s#Q3=v!lf)^V{D2Kso+ta%sK|AX}{&bl63-!i(EII+rXThbZc`eS+40w;|fa`bttKTTsJ_iqf0Q>2dtF@d7!9_8;(xM-dxzf@i!*Ri}YxMTbMcWDNcHq znau?Y2Y>quVz#OVK^v#Rd%W(F&mu>d8F67n0%20v)epMJEW%7KahA7_Cm-vqMG0h9dhg|pa z0ger;fD>DI;8AAz#KHyjJ3G35#O*e8o_-Tu#73#ux6-cP)U)>8##Zrm%)Xho&GHH7 z^~hw(ai4*FiO$dN`5}Q=Fi~OV*3gO~9H=}w9Fi+UfeYco6L6nEOi=`mz?f8Qt_93Gziv~v8VlcL0GO&uuqT3*-JQ~1h!GUP8k zSCJykt3y5uUc`#+xsFMQpb&Gq>yz!>tbKGxlAYaUetl(S#*d!O-7V3W-+smfYU)TG zbY|~T8#j7o(`Ii`%l@*z*!}^kJXpeJmb+KXUZdA;?+z8WP=yAkaP@}QK8;I4C-{qM zrVdbi*umPr(VIVwKh4t!su7A0DRdvO#8)*Nv(Bu~)%2N&D2-It<}PoaR_ZRVo#rl| zGcD}b3pPyJzOHMS`RO*LW^)YPWRJY^`fj73d=B8J3s137a!kg3#S z>r^{``_#_Zfwm4Hz9r!$fK_>EF%be(tG(A)jGz!+^Z)+#IX5I|+j-{yJkLLTxaXYx zvi9CfAEm<`fsa%*zpL6%kXN zhGPW^KLJbUmmP0d4jL-(|Mo&%C5Wi6q<|TfkztsqjE=;_)}zj0(aOyOBU_JdJ+YNf zC^6NkAA$LXC)1}_N6ODz4F0if<$$(a_dn#=xtLRRIgBcK7VhQ>UbB{O3vRIwM;cQ0 zh6wy!wy&Z06#AXa-$bwcKa)TFUn&2tijOWl^x@1;`TjPXE_vjcBs#%0STb(J(S+Jb zx9zu9e)m1M(h}4OVvR2KluvXn1#l7B|L8N8yM8}CSQ@I6Zv~}bD_@?@d zL%ZoC;{#Kz<@K>qQ=Q8}(^Pxjcx2o7ZX-$}kf*-JTG`gb-~v|i+`Ng_3zu_Q)1j#y zDeKUl_$F)oA&8Oh=Gk&M#z<^D zsktixIE7{f@?3uE&OOQy96TEAv5$lr-o~SrHXLl4zA4C`yR3qg4nF21`078zXf)_9 z3la2!;DW{ZW4M-5!&LoMM~b&)itVcfHT$gA>~nNZ2$=8KYZ0u$hSwPJh`I%H%r|r# zyVT9O&YgD-^PyWZ-0ZJ)yvr4qr}K3Kt|lgS?8~4NxhtwD%&ohC1lN&{&E6Sq^_UEH zq_kq?aofVG-eLUiq8?Dm*6aFPZ{OcKju91}X&rX}r%->?6a_bVp8(VcXT z4z)&1{6rHo&cp!weBq|G?P|V7TD971eZvWwMpM6$$sk9|k1@{$3*v(Ng^_F;6?~DG z2>wvF9&KIr4+6Zbl3&USnW!8;YO0AEpN2t^^ zx8&B73=x4tw0yv|4|j-3VawJw(?9aAH(Z7f7r3Lft=3fGtNa?#kbU=1rr$vCroGZ}zrp_JTjWbd>@k|BdIuLn@Rse9wOVlV&LSku9y1K&8%+2Z z!qdF*k0yMA3IC$bst}iEj=N0Ujf$%)Hcrll$XiEXf^IdO!t<0c&C&NOZ`&OT%K6d| zDH~1bohI~7I3U#8`VD=gbA8vu+y^^^hw{h^KW#@cG$0keq5hE;14p49^p+%$C{*{6 zLrJK7hNJ*qShmU^TrSiXr-%b`gD)#29hKMG_I=>Dwl$ej*hSIW_OB+OjbCwfCLQ1& z4^C9nH9MO~Cty)PWv4+!TibqZaz5sRB4C9F1Wy*X0W0Fxe_pIdE_5EljrX;-+37Sx zk*1>I*0u+{7zEjcZv7QHDVyu%_7b=yRssbW$=2HTAW7Bl+M2yQd9BO-AKqG*{WHIA z-WP|Y+;0@x`ctLCpa?xf?j+b%Lg-fnfX zdeki}#^ZA9vZaE$Y=IZ0RF9j0hZIm(CaK^_-WCO=|7m`oGQa=R{QjI@+h4UBw%%F;>u?bn_=-^+-L0zQoDi5=-*6PtZy)=dI(HX&)4`Gm{jQ1#GN5_dvIHpD!q!GtWflZJz zlSXG2mbUE&ZslgwMobC2NZ{M(0I^ zn&#F`!$GlTnl?0t~N-UncsdB4Ffqgr()=$kPrDsClV{(xp3syoc z95srjZ0Jq`cLsT>;sx%gw33Sbz$lKS-RdshieM3AK?RWj5OW@_K|SI{-SN^+t#F3 zQ{i)Ek@6znv)5wn)g}f6<#tcub5}J1%Tc$)oPwkE_hE^=tN>13HBE6k&1VyzD(_D^ z1bBgz^4t3pUkf?6zhBnbuumoKQw)Hex0|~Hh=H^}(F=_dAM|ugr?%gzeIFM16Witv zSn({3HP*`UgU-9Y>J62mG%!>UikbGa0A1W}wD26pk(~2dbL0Zk9tb!5SxR_Uu&lRX zr>QeF z(HuBR;t&u0T^Xtj3G`@q%g|tj&?$=5 ze-&Ec#^_X1rBW{eC%7}U1=r&|`h^NQLf0rk!35NGjn~Ev4eu0hN-ZQ>g$@BarO?!T zQ!9Aa(0OgdpJq+$cP4stPJM$ElIL99vJ&^}^u+XB?ACtg*7wU^Zuk=gUF_8(uXr%c z*e#zT$a&=%aa!s|-hb1Sx|B-$n0kTWz%9s+;&x4zLlhB(All9ZUs-Vnyn}C+F582_ z{mjpi9ql5>3x?H7R9`kaN%biMzwjJp+lmvz>d6!C9~4%j1Om@8;^FxI^v5 z59dK4lsO-5HT|%UQ)7ntWWyi0Y!TQko0x6Xe^K4zIWvD>Z^TA$pYo5C8<8Qokr!*| zv3-xq*2>YIG?`A5nK@tG?_B-9gY)~VkCkn2_(R{T?t`k7{9T{I>0K2AVvDYdV|u{% zyVF(TFj9OTZ9pF%$^40%K-B=3Y)Mt=Zg@Q3%u z8pgK$!l)UY^`o6mqiD3Y3E^FrwxZIT=TpO&{efA|B=FS6r_#VKU zI{iQ9ihwYWXzk|H_CABw;)Q$(M#D%Lalse`42F|( znh{MbinRd%_vxp{Jy4tKGwqEL_u1GKK!Dqj!{nthHZeK>+c=NsMPS8JMjt7UCC>*x z29%Dngj)9QWbx}|PQYJE8L}AYLXLb?R$$50EQdT{!5!QJ0Zr}O8*T-FJaVZp;D(c( z6sCp8%Tx&p`83Xgt9c)5A zQCT+-nZ_)N?d278JO(-(?}i{}5!-PQG>c3!nvlHjryv`T3l|Yg?foo52foE?naETi z(__VdPRmyh4slTwo>{02!~NU;Gh^$OOU>nx^WFrS?s^FBwpsIg(m-~zo98_Tyb9KK zrqG6LwL#bq1RffvHc{b#!}Z$@e`jj5l$sMf1u!DcjGf%ZL{RscrH^wb9}8qX`*bs3 zZ_hnv^<g530<2N0wQtGQXuVhxppb_mkF- zOgcqL%SoCl7Et;t)e*hy)D1+ZB4V*hBn_RKOxeoFccEsf4kd(9?VXP8Z=`N81AEHi z(dM_$TR)u#J=&-)3^|#H=|g%Z0*R_HV5$>UCFoGxGgW`KeK=?>?O*{zpRhq`R-(2j zQBg|XX?|Yyqku#KH7WN&CuW8ccZ3snWs`1(iQj{Mx%~K{K1_2p#RI2xdLsWquuGCq z!0UrX1ZT~**Uc+#_l7j1 zp93l^Q8f(YF7=xbAbnW#pHiZajZAbJ!Xde*H5j0b#z&Ok;*kk1Rf6Y9kh%|aifhOG zLG;B@HAm8|_`QTCuE}p=2WKGBD7jHte+BGNn`&pe)!d1@vm`$=;H7D4%3&OFS_f`| zq|1)+t1RS97E@EH=Z+`g#6QaGESLkPc$@4jsOJrenBHxO(nff>J#dYivwklu+*m=a zr%{~<;k9OX)X>N*&7pvb?|L2POrg>*^jR+WPU-GFpMTeUYwFaghu#+0tw%ZrF5znS z&Wyfa44ofhqLIr05>0TQ6(Fzr4Xj|RTKemSYy6x&*NJ;e*ASh z&yOWAyKJa!{<`cY-nJ}Au>mTVWk7ExXy!K)O&yu<@OJdm()PSZj{yh^2ogDIYD+3u2AbJv3a_pO? z)O=HSHuA#zSfjYjH%bT>EXO&NG1O4J_2sVbo2Ch}B#Bw{kLX=QjhjoqB)SL@FAtup z8Bp;i_8#RdXxY{{x@;>FrFt_1oIMb2c)O?_+1_~C^sW=Yd-%{{4tDPi2? z+QF!`=q|52Dljyx;u+k?mjF%aCN7x-LH=s9^M~cuJqJ{^P*vp_RkQs@yU!Y;eni{D zr?x#;4ISBbp(86mgZ_I6h#CZFpG4F{K)$tTiiZFN4oAS9JLMZ zoV!pW3TGklpGbr9sC-IQ{%1mIEYBd*f$nB{lGmZ2XDRoOnvhwAiHdv%C5;Fr+{|uf zah1R{v8E3_eCUK@t3nA|6*8ZCNnD*vrb4z$oCW`wJ&V{7RikH3OE4b%$=i*{^u$n9 z&5nOXDV~aH<@d`69^C{;=59^v`lba(cJ{K@WuOz< zoV7G0U#!Wf9ECO#Hl_j{Z;lS4lsfMYajEH(^v}HjOm|I+@Ys_Afb`*hiM@7GOW?y@ zGxZT&Gr#eCDTLx36j^Qe$Zvflr*J}E!K^{ zR72IHro+3<>F_GbNl9u8NfJ*;KFTJ1F-o-0h{fB|9PF{}M+tZM*jj!~A!GL^6ZT|a zxY=z?F0GZp4Osi^y-oJUU~4dOHL0#HEbE;2nh(3HNfQ$NWoc;aYAO-u@JB7fewsv+ zKWawPpJu~5Yr?Pq~7mk&^H&2>T zlzi%N+V(_^Y6vQnb3Zr+?kMDTINi6k)DXwz(%P;NA_iQ99?*kKbiu-glpw+PMP=*f ze;o41pEM(G-J%&tBh)XeMJER}cb^ffY1oVYQ;2|DypzDZfuqC*jqN^N&tmSLzoaNrFyM+x; zJN?StPi{hKyL~*Qsx;nh&%mh@SEzurz9~+(^Y&PFIE38q1-az##3jZ13-&wv#83EP7IXJ6OMH4*oZnucui-uYziw)pCM&K1R@OS9JSxTTjZl1Z)Ba;4Nq1+JFS)YYw{C!Xh=a0uSM8Y zlxZSSId2upe_^okoHQE+4pvmsvH@_F4#K-pVp^_qz&?&O^s_1M0C)0bp>Hpp zR<_ov3MO;x~Chx18G`7u~>n*?_fVJWqPx;u4hef<0`MoJQA- zx`n^+N3y<*M6t7fET%JO3)d7DY5k)#8zNrEP9_ZSiKCF{%TYPzAF& zR2rW4&&Jd2=k6w0wxU-F|WJ+PUk?Ey+`8D|V=iH|Of;#lf|`!kvq)V*#ki^X(bKjd#41`tr^BIAeH%8h?n606 znG9Flp`73F1SJrhd*-y!mx-JB+#R7IQ6{L&6`Cz_;*YIp1>Y zL}&ZM&hA5p@!q|BYrzitMA+HS9Q5wPW&7_Rvychra%7!u)-Gkz3dc-2dDk4 zZ`#-IAcUyV^S2XP&~L45IvMQEN+)vN=sUU03(re51p<+PDm!Nj6Eo(OGkG$vJY~Me zRF7@E7dC#?t$owkz~bxH6Nk9Sbhkb5`NoRpTL&%aClkO-khzXd*Fh`@y?DH1fk=taPtYhST`PO**5>z!q&q+wjT4k z;z}M^nDU@UZt~XIrbp{;joiNY5RlLikd*E`)U@@M+niUmx~P*WGs&wgbC3)=u~HAb z5-u<<-dWID)@4oDPSx4!WyK2-JBd-#Cxm{G+WK`e=6S0m)7u~X`Qsac9jg_5=ug4T z$h_oP=sji1wIrroo*by6?jm)Lc#CJLzTLd`tw~98AkL#I)kNegqVIgN<$3f-vLqV?hOp z9Nkw?@2Ioo-Y*w#JH(O=UzKWd!4~4Gt!p~rz1f!mu(FwS{|W#bAjACY%|46oQof_sg7@gHj2RX~t)d^3^tr*56-t1{<{}b zNKx9#C#wZI0###AJMX2be*=u@Pp169tWT2;hxBy!D*H&#`e8c~G!6*o43;;H4m!qO zS7%f-wziiJ4xR|i{_T~I#F|KBx%UIB?>Vpk7-V&&UM2|R@T@>;9dBSOyn>`WL&MlL zxg5h%>NgspP^+9H#$eMIFK%B0@=<)u!s;pOnYTJS=%UUR`<)!DR{|U&t;0Ggu#=5& z1=^LZo?Cx;%fZHoo3o{T_GWIx3I(umugft-OKhwI4LpbJ zVV=DgJsJ2o(OIR!wzFCjdVup0uyx|{;%&i0%*h_@L}3d4zHBYK%a6+eNv^e6OW@Fo z-}&F_2|d^TFMZRB<&81oyz0Evmn;1Dgjy8bo$9UY)kLK1K>cSDp-0V--}rhjJ53!V z&?mn$IM_=CcKxAe(@?^OS9`m)5@W9`^lXKK=U`Zp6rlWM|F^-c>PSG}0?03WhtL&p zxJ`4fF`OrV^I|a2_w32`IxpQO95=ti3`UD8kMUrn4@nln_!uxBUE5k0yCQir8G%

tibS>?MnR6 z;whg;f{`rw9p*L7>r@%1+cZ-tSh`@BtI{nhHWUYb{g%GRm=DHdPb#f0SugKWnE^6P zp*mrnlX>ctOdVNC`8cu3FKXh1K%kC=CizTNzaBRoi!~=DN7lC7x3PbMtqdC(Uq7`RFg4(t)7LlSkW4%zaZLbH?BIg*?~ zZRnG@6<&;1#x~FA0*TD&*BePo(KG!jXlW}jeT$K|Th|zQ`#SPg&Oh=yQfE0EVbH|) z)eRD1Cwq-ks>FvQ=) zoF8{mtX>Q(p~3r1pLuof$`oZcVUk^StZR z3}=`vwfH1GJai?r!kI?t79;-+N^3@gP^BFhs9@(M!m_GA~W5ksz)3 z=}>qCVD3=;Fs=4Ec`MR&tpqLSfeh(IGY~jhAe@%khBE4BH0tuma!jpfW;jE@69F&) z0NKpMLhQEM*!ORqMDthPpi;-M=5M6PN;Y`4{+i?rx0Qp`yio!uta&5PP`jt|{ZTp} ziUr`SlKk+(r|1I&GJ@9Uc%r_m z!VGU+6=5n6IIwnVTY9|*>&eB5OotKU-_|j1F?$A+S9__iHmQwf-zHr+2PqS!&&9}e zEhZ22j1ehSVP$dr?G52^W(>-#Kij#Nec40Ggwd~jg+h7mRGHM*SAj+`BS}8Vwv@gf zqbLo#U$AC%=>-f-ce8|Du+DiE%IVwXbO}3y@>n=>wphz0okB^iP-}O|7a$_4S`F!- z?Bcg5iER3G-bSU)cB{m*b^4|vyw-ZJVv9+7#T+n@w16ULfAX>`ImV|b079IsW$1Fy zF36u8^-WV;lmx4Dm1$FBwo#$B@6FP;lR^q~97MD%4uGlEnl`%_U$be}znS3n{9(aB zPCiJm^WIQOtoO+#FJ%!aNo@e+a+n`jf#ek8`YPG4!wiRpn>M^n-LlhdV{KR%;?uO+ zwC@tuZDr=yYKbpDiw}a)vAFhjywUii&^e zfcZEC=;}CriLl7}H072g4}95IOiHczE=F8XHp7fJX~0ol7r&Nc~aaiz*ZD{yctpXdraJnNxGUtOoV zrI1&(5?o)Q^O`4sRH;?)z1j&C)Q)DT(B$NPquI&uB>o9F9^pJwZe7nl&{;t@&sWh@ zMLRO8O*#y48Nm)rP-u+Qpacn6%gJH%NWSXOF7m-}o09U!>r(G6U@cmY!i)MQTk6Yd z6zX5*(pWq3j9Om~Br@tRnci(oD0YQEkhIGK;@Anu?=w^i(c5CKRQ*k?KSiCHL&}c5Zy@ z1tY=>9XR3Zyc>>l|*C!3& zqGW?#(s6n_MVpe|;~k0oeZF;}MyZU4*`wXc(Z`&ZFi$Le6NF>8jM#q;IkyD3S*~D9 z+1gp}7Nj6wMaR5YMTS3*`J0_4IZH*gLvZFWbJa1_Q<~rNICnY$2Dw)JF2)hR)A%eX zS_%>G$9xF2e!q*yeoNGFUiQW+TCcuJ_P@@|5B}K@p+XdDP)o7cJ0HNZh2)knLQJwB z9OP7scpuH6iM$o|(V!JyN#~m^SKH%lsOL08#PYr@f%!N!T|>P|ILTJm@ZJl7*^yl~ADxCvfc z1$PkRdi-ztgahkLzYLY&wDkC7Cdp7b z({DF(7kXCFN6lThUd*4nEM(r2_iN@XzXvai|*8CP6kI2h7~$L zp%PMBRq*ivSJjd`kotF!0X)9VTsSrNu<0MAUMv5*L&j&`2G8HrPD%-J5UNh#K4nM0@cj9=8H6?L!fZSl z$n7KxrV_#FcMqS(??}(%_cOnhL0q%jw4I{JDfu)F$#*uxEiY4oIX?#2nHlr{)v&#@ zxxO4tvy@bmF;+flxINPw)IVA()cwG0nWZwAA9jK4eDc=0g^{uktQ+^0t#8!Taz)I( z9`Q)SAmK@eL?|(R9@jKs$oBdB)pXtE`LxKlK`b0*gGe=OCZ+)PZe>J1RPs{~ zp2Qc6U)FOwa67;Kg#DI>-<(^8-qcu_d}^Dgm8AXwP1Up?tKYO;iw?CzN>Ml!0Tgto zphUbwEfNuYTZN& ztmWQF;tP1QokoLA$i>u1_elQZe)6Ms8wHZ@Z}81dnVc?k6zX{`;!_V4BzgfyCpZZ4 z4MPN*QNlFNAS`<-uJ@(T2%khf4!VZ_}SBjB*V7y%b!b<|p{)01wfx%i;VNleCI z#~bJRbY2Q;GHYnLR{W=G8t0fY>r;4tkx^$xtfKMD&HE6s0sQ5>o9$m)=+3w*=z5N* z>0IT(PP;wKMs5stUE?wW8~_ZdA`NeJ{3*NOga#j*Z~8>JdrQy_CC$J)Go!1*By-0F znHs@pN(BrRG5YzC!jyJLkcB_)FsghVzsgRqq)tDde$?)5PJ{QrPjcO*>K4laxwt0Qc z8-Wc;nJr7P5}_b;a>681Gv8alGfnlOB;`tirkbDpl%MQQ?@3s0@?PN68FTrc-?K^Q zAZFbFZmOKo{8l^HYS^lAu2orvLF{*pP#2G#K7TxgE#(d6tz|1u_{sD?Z?5@vYOw}5 zpPQ~DqmXU@S9pLc0o?Ztq4*_Wk=#@{l&m48rc$>`vGzs`%tf)m!!(jPKO3NnH??f@ zdER=o<5F3f3|gePjo^RNNlxB@|T{=~!(lfb`w9nQEq)b|HxOX>=dOQP+wytLi2 zdL9(z&{p!ETV?)`#z+A3hGn93w>I4|Clslu*d&MU_f;xJXT7L+XF6mwA0+v?xj28xqi+dX{jYno`n`F!76$SaW#lo!C7;ZbDOfTo zIqycO%IZ&hyuGzD_9@a9Dy`Mh?RBnNLZS*0ayohPou}`Zic^Q1xQR_y4N z)X{RK#}P6Kp`PcK3^aWy(C}Htz)uD0Kb3%n!U%>L>F)HT%0y`O2&L~3xlJWC?FK`$ zsic>?ZK~av5wPNyt9HWxv4P$#UtQde{eGcmzpomy-!q7+mStP+c|CQLXibaIbxXY+ zA-5sJXj6K;DAjoJYOObG1CPRVrRwltt~m=P#3e_2yW+JH$!)ZZe&yX~4v=woM}3(7 zRfMu~KDB#Kiz7%3zqQ)nxJ|R@mdmofad?LA+Urh zt_BGxot3c(R8mG%v6L#fL5dDts3v*U1X383wdhoF@wU{BJivhJuH>d|qq&vXOc&Ar z!^Ee~0Zky~qwJu`HMcQ5#?uEDAzz4XU-4a3rDt5IxV>lJ&Xl!KTf=&?a{ni%ur}{` zySK+$Xw<^%=Rv%hW6Eey_{lDMwiWH@d1*X+3!!Pyh-xs}1$H`sHlGG||F&#j&^ z`z!X`qQIOh?YSj^IbX2nmQI=dIs1#j*`K!OW@pZh*>h`xvoE&iP72P(^}9W{HfTN6 zzE*l+UwCSpw?uhhZE^crum5OK4AjB8;T}3-$C0poB%}UJ()siyC46(pKAhE48|tcH zkb}W0a=eGJxOG+JVKpN#T5cYu<91bGl2TxmmoitXL05$~fAgsD0xP|T>7rc~)!tW; zm!!mdlujYkvom#7WP2%Uya%I!V43;H?7YF48-PAkM$ugrW@VK+UB;J~BXud9&_=YE zE9yORQLh4hdqxKLy}~!lE-0hSBg&4*K;P=A%I|}xpAjFGtm=C-%|6C|o$WhPYkK@z zBWL0_(iD(f`rIIivyOe-R47LwTunsX^7NW@>=qLqG=O&gL2U z%rfBdp&>5Y;j*oY!Gca}RXh-Vp>LYC>e;jPl+(J?>8bdH9Ibgu+JD5V&~wM0Q?i`r zPVm%twVGJypN)wyFZM*R{$jlKAH?aZ?k}q!<@6OC;HJb?PyL<121{aFkFdnIb)ez* z2~J{Di>aA)vD5JxIfrE_d$6+Mk!AulfT^xXhwL+uPUs~QJXxg+9C9zsQX7!1+6lpJ zK_Bzu$eO1;aapxzndm6dIaW)`>*S?f2Bm;z#P+UoDBhWxL*A44XT99>z^LP76=up; z$L<*3myIwwY?fm!=}`^Mbyd0UO}e#8C20LF zQnue(@))tbf!>O6Z$+fHBDc39+FOy|lkBsYKlg0v+1&GD&u@EP>Uo*nYv=FUpeG*l z0M{Eq2Ie`t5zu+o@&mg!^t@y(@9D);02>Od<(m|~dwtJu+1nE8t%=aEJQK98=f&Qd zT;(;NYkM~L)`2yFD9fhJhRnp)*I7Ptv5%0)C7guOTd9oI$|0I-ZTsa)EU} z@3_I@h^MWt<7_CvWz$2CUHT5^lgG;8%gRTic;hX(RlC{dtsa{l!+8>E&SLyTy%`Ll!1aR>^*xlM_)R<=GUg>9*-@< zFfjY}xDJTMXB#DPWc%bpMrQ3C2?aOwOMYcIR-a8C>JGN^mhJQxBzdYw7X`g%#GM&o zzfyfH+?V6y3o=8#uoeFoKwt=GGVy7AcxWRdyZSzD7Qxv+7y7o4vcMpvtKb!D>zp@E}X6%Y^{r(i?9CH>KNB7bJxqt+fKMom=@>72t40O ziQe>H_tz%$0Ppxn`<1~&&)8}?baEcM1pdgrn|1zDYmwH|?3f^CIM$*)B4bYhheZugFWqKS9S7(V();68ERf@ zYTBcU8;5p|Dof?c=gk6og|+CPNy#^F3zdfz%>xB%-H>+mWxF*YyFK$H2eW_CdcIZk zVluXMfXfQb6w$b)A=41=#=+J*Pmq7RwemsnHZa1i=NE8IuWjP54Nh&NdzV1L2o#iC z80eG>v$M)|3t#p+kDgRxEHZ_TBgXM-6x`z1N401&{4>07WqCym!uCUbYxJnklc~ApP&d2F=sgOg6Dr7bCtZDBLr6Xe5PNLIS0_{Fst#`9 zt&q1ur_07k4&9QWKtokjk{>MKtSK8uZy~v;j?lHlV;7Pp-($Vd6{M?y{VrgC?fG8X zOFY)YoyZj=zQ{=x^fL;AaovRu+L~T28f#wCEK8DSy_{jM54-Rn}>^Mq1Ky2hB&t+c$GeLqH zqQBrrXSZfw(RzMs=n}?1bO;XIFyw#L<3{a|E`&jgV9)}?lBGt(jAe)6?t%>@cSEx% zBHL%q{}NYLUNPu&pJdBx2fZS->fD#`1@Q>^RV2PbW>vz5++pUiSGD2I5Igt8no{Sg z4HM?Vnwq`j8P<&WtQm5z4HGD>M9N%_hX%NBh!f!~T^E)>w<=Za};P$og1xxDbR<&pd?}31U;G(GG|6BEfGEEHIyj z7pZA=Y%GQGlIBH{w0k*q@BwZe7V&d0B0R*6(c#=kPR*3yM)*=*4d6!JZsYB5b0e4# zH++a4so4-ahDNZXa&VYoh#yO0L+r>f=J8|9YN-@IV$wx~Rr#dU{1z<#|4YuXe~p}H zeVCj_J=|xXLe4)D{5Qzi;pO}=IiK(%{xUf=lzHTQS8s-#Z}Rqkmz-w4J4DZ`jW8+l zgvlfn_mk2D#nKz;{@cO?e#v1yEcGH1g^}}rJ8*enNqq^8%O5|*f`!tjq=0jR$5W}K zPI2AbZ6}5_Dqodyq&m+=$G-EpH>`bxIwkGP`P(X$1cvzLBUP$?YBPLfL#65!*-ure zHWDab)*q=-Y3uw)s8llF(r^EoN>%TvR8dcapi-U3+y7~mYM6>MOCkfMW*A}G{_iQf zXa6&V$B;_-|6SQN{eKvF?lux2*GK@${@bbYh0waR`!Nn<8pgzWp&s!F4|iw+rzGL`MtII#%+dYyULew0=d<_ zk&Hd<-J5y?=C>lZdvniAy*aVnep-R?>YvFYnyJ{}djow)SQfb#RK} zMS$e?ytwPkQoed#+7*iJUMsUj_uAc?cD~cQ>%JJ~=NZ3D4-fRM)M~YucbgQ>@l%9bdPE&xqyo zUc~=W{#Wq7ii*}eqofSld22NF%*Qn8d1^Dv)QkiA1f{iWWi1pRuFHK6+-u zdaVSWIJ03j{W{NGqRn0CKQYz^c*~OIN{XMmP;bWS#%GkxOGss}zT}HJJzn8x9_ex= zw^gp54ioltxu4N4qjYV_8+FJ;9sX9n58k1^Cq_54G2Yo+QPCnJnS&FjJj3+f(IKP1 zV1$9VzFV+jq@0$LNxWQ^8< z*dK%7pEfZqSrY^!EK_}(tpfv>I32}XF_IK?wEojiun25P@x-#ki6rth>{=6|FLQ@g z6M3GW4+zpWA2|*$wKhM-{JZ`-`$&_Cb^qxYq4W0GN9J?zdO~O4@9~gGabf|sQzo=` zuxFp!7GNkc>nFJ93Ud(Z5YD++!{n&bnl=idEEa1ApJ#blW!XpWrl9jE=ra3Azln0M zn>p`I`-o*q8J?t}*EFq|#YXR*tus8A9nO2!gw3YjgH)!qRg*6(euuEI&3!=A!td=U z-qhFoQS+ZVkT?_VcV?oZkh8eX_I7jBcKTW!c+R{wKe6HoTAd|7go%nA=L7HjVX&Pm znxI%Al%8q*OS^FxQz3fhCl(ljV0=Cs2=?peG#wdZ#YgcD;b%I#VS$+)Z=Dw0&^sz| za~>Txn)pg?(t--kz@hH4E`&w2_hM_&?`R5j%P%Pz5(l=q774C<{cDfFx?7?gQc&S#sRGHTm%t1t2Ja%K&3q=jEz*T zzUWIv6Q(NFnn` z$iWfpI~Uc#AP52WyFw?qV)*&8|lSxZ4# zq9Ql>1&&!k)6(9&11Zh?ZU1y5`cjbl!;yF%u39rz&!_cPT&sWTKj6yl%CI+NaF~kw zwN9j-A_7kJ5mB0MyoAQ!xe>2jawZlYicx!Vh)7MMFWlOjRe>xsQiE-@ZDP~J%>0&Z z^;h?1&@1^2FdT+Dccx~I>g{p3ZiXdLIUuS~|8*8!te((pI!1G+dU^BF8v1-ghbIZ? z;6rN_dci*K>_8%BCmM6iI>FiBX)okDyg!U~^ZuDTch)AZ;XH-as>5w%oz{{+QGO!x zDo%V3&f+?s;MU|P2ImjX&kDkJj_x82aWV|2ch(D`o1Fc~w=$e#eK@%e&Laz0^S4$$ zFt?LqD{DL6ph(+#q4K5^!K1ABbtSG3aT-MhouLJvRP!HHQZqZ@DeC$V`w+FF^1}}2 z<;3-2FC~mL>nxjFj<*)Zn%Vh4dc@Ak6qYA7X+WuCHtXYX{?xkynk4)3KU1MMKTWSiI)VWW6 z))Y({ZxL)Q-2~&tscorEeU29V<$6b;D>UU4q=NM9+ z+?bd6$se^~e_O7zF|l|ruk_=XI{tRj=E)wT?l*X@{QD*rzoP^?u7eu!Fs7;KIXZ)k zM0FM@uiFe&0?tDQg%787w^jyE<{pid2+EC0ZWhu&A@T6X6x=;w`F#JKPx{~R{! zlSn6L1=Ev;^5Z3Vf;0?9^Mb(55ROvqheCRDexmZ2NaQ+; zRo=nOOm8n`a6vio)=GSkWR~O0QR7N*L4_CAo($Q0gTV!rd?s$0M8A!)7Y5fl`CJNc zf6Zt&J7e}4iSadqv6jj7^R^9gAy97S0BQY$g_eq7YcL%QR}vDSun&cK&L2(&qjvbI zy_o6k8Xpt!QI8`NP9{^DHLwQ@TmoAjtiQdL^W0u7h5%%YEOB8jsL5OyzKZunD(Xp3zR1=G*r7e;`DU=blxXY|3-)>pSiqY|MY_b$el8=V3*Qa@qZ$otWo4tEjk`{V@U(V&dYFx*Lgkv zTB+yMpRHAkPBY8Tuc%9}S`-NU2c3CBl74+x@I7Zokno`O1F=HKTUp4(;0{X5ce9(^ z?5gS8{N|kHbZ}8qOcJN0Be=uV#M~h1)g-6Z=z_(a1)cSGtrj|;R@nuV;;pT7soW7t zkDu+8zS&xpJt4R;IA9+=YyKCkm5F&Yf%Ez@6Cy#_7Az6_B7Sm$J()K~+`R9*Ik#iT z9b>IpYS!qv2GOUwhF)!r(4f==U!woF@&NOB$qP74M(@f?O&80oiho9kNN2pIc$3kn z>%e;j|Eryiz=%?9!7A0$U1oY<9XbjM5HOn-Kro*>D&MW9l9VH#e2>-%EN}3y% zh#RmqC(mH37!o!&wVH&KQym5KY%?s>v;H(w*6Cg~Dj;g9vrM~C2#%(8s#Es=YPW>$ zLn%y5%g0TwJG<6eJ`D$7*{37pxngyBVM|m4brO$?&id6*FVL5nxUr<{#rr?WFe+Zy z5M^!_N=7j^qj9|9l*iPV!k&U8;N7+U4!7%0@W$cK2j0q7=;? zu^#mFF!giT7u8;Zg3?OtbHkgHE|lr|#O@uKtnh9718{ zs3&1X!4q&>2}f5B!XKolxR%t5w>$0V%cyH1* zyf^6?-kTH!?@h{s_h$48Ub}3gSMX-1FAT;%?ErTVB`+~Mvw{O6%w~@w5ODyEUTSDr zaJ*%cPsWxqIu}&_xS{gLTMoi~h3dvWp;~Su-V7cjx@<7@T|S`&$y?0LCENJ8Y>?q0 zrStx6T~~Yi(XNgHB49doZ%^vD%nd_WcsnDtQ-#_>YruWxCLX_@pL$058P8w2)!Bf5 zkn$`n3-MTu9%e)GWJZq~WX7cALcqEHsXhi6dTla(IatRnGqtZ$$vmt5XNCW))H9up zU82QwJNQ?t?qPy)zT~NjCyxuhyF~ll>LnE?+f5>OkZq&wfFVz07^uJdJ3x7-Len~s z75^pzjP4dG-qhtCZ9^`oUh{Zx^d_t7OdkF&>He%07n-j&FD^3Pd}&d@eF~1{@oX%j zK0L~Ol8r^g9?cvdun$|nZXy*zcyNAns(s(Zfi*I+)Sub+CCR6$cKO6WLz(t|ZN7iM zJ1I8LULSHi?>qL|XtG)dAQl-%NzN!|{IRl^kS2Jj==-Sw)8;HS;QQA5W)yovh%2LM zdMR}%+kk*3acU~1o2Cx>O{JzoO{K{?8LTF2!{f;&x1DFc{3h2R{fIM7j>kR=@<4J) z8p#@!`R}fHLXcSKrMMFJiO0MzHXhB(ihJ*cWMhJ1P%kZj>&*r&cf#w#5%uw@_LqD- zMN$t^InZ?vVqWQxca z4115EqUG8j&R%J2$xiwf?~{dNz{i-kS<7b@CY})cGivnXzwfjGVsr7SPSY?ez4x$l zv>q(V2|EfqJ=Y)>^gHC{1alwV=;h&Rx&z-9@_nFJ2BIG*#_y(YOZ{=nl{i%x8kP-ba^^b%Y{Z-NCswcgqL@b)( z_c{tY+3Vu5CO#z>z)0yCU}{L#%sktC`5muqtoc&MTP@Ks)qb|JU!b@hgI}x-_P}66 z%8kbq3KVq+nxN^LdI?-y#cMLC0~}Pw9OdzAL`qX5fg`8V@lZ}GRV2C(RZ4>aUw);w zun(CpRVsA^V;b*GdY>gp1A7`TLfzyPCv3`b)hBqWs9zo4j{twSnZ+Yz7zq zRepPh`J-B|5yx04E`ZKaH}risG|t)0v@5tf^X^Cx^+S7_!-=oxq_Vl2TKy<_bB46T z`g%8Xk$u!6D9`y|{@*9A)$$8WmuJ0D5;p!&%^t^?(|@R27h?BoH>lv@ZSx?CxnLR2 zK{gBqjlwyW4Q-k|B1-buI))QO?g-EPZp1zsX?WBqtm)a3?ynlJ-8w+S`>d>{!@#ZZ zz}5NSoX*T^BLX%fq7hBooT5tZFnoSMQoz^$6nGL7z$?2`F_^iPCOO5xs@IwRyo}U& zP{C8XNpJjosr=9>6MCQjF7!Z{6*}*tXUbzqKAQ<%p4w*SRaa{%%4=cEA-{pi&y#cOV8d>N zPd;M3F!eEzCVFLoDN{#d>EZ1p{Sln0gRm#5Mtkt=6QfRP@oOZa#VzZ+8iya{NvggT zs`5}1;HF=Z5J0Cr$28Bh%`_e4q}$d;0(ZinpRZR3xy0*OBOrV?4MAub0zC}E1OwrN z=jRAQFBMOgds$9@PJ(s_-@~$8WU@T>{1j!8mq6iDlnv8Pj;xX={4+J_pn8eATrzpW zfC~RJ!3-)U?01Bj?I@?(8=c=9`vJa=$)4*ig5)%qJxvZsd8ZZ7>k6Hu5w`df(?u$c zg>G#v#}T`xwmFFCRw$R4m}lJKE^WtFf9ZNurLx&2^Z&s4&;JB{+WHRcP;=*M)oBOr zh0R3lYUYi3tdD%4G)^DBl}kz!nVd=U%v$!^Tv@i9_~LBLc^F*n!=Z*fc2~q+AGQaJ za56@AvgWF$8e5KMbZem=1;`V96AjBNxDtT#`SOMG> z(k`=%QYksrjVUfs`M?aW9?p#aND|i!HX788BGhmZN|1eIu;D%AdkB>~JGoQ~usWl# zmLV?O_osAyy#4UiRC+RuJ|!_HUv>W^Ly9|5yrgaza2J~KN9x={Gxnenx(m&?gVtdN z9g@aKDV8w~-Kobo1|V(v@CP7Ws5u##rD;GR^@=5$m`n#U7p&kn`92N|yn%-@eLxy! z*tYI2Gy{z(U4u+>ml<4ChpQ`K5@CEYeY>1qI@#M`o10iDtVnNwB$G48&yc3=S8aaY zFg5$MzOQ&H_BAI}?3j&;jpix+x{i9GUy#)sISgE9{4^BC+!KfJ@2i?o{SW#e?Dr<6kv#Z@&2V305YkYz3-Rz+GT; zZtOSi0_oe$8;qXKEQvbRL-A@-qLP9rjP6-?NTUNff%4!ZFgc1OacoHU&Vvg1ZtXlz z{r2>3+26&ujQ=Nf@92>34YI|O^DjQBcxU(Bjs3{uw;7(&t@#P}T8QJyZ8YvnI3^ub zZzH>hJ_aXG{cad*pH#i`8g%gy8wpq(mD-J)(ksZ5leQ2+*pk#t%J22|tq7$uhn4efts}9cjgQaV& z_ziSU&eg@o^F(hl$pVRKy{ef~U_3CwY&$yiQ{tApth3Cy6R$QY??cD&yahzRD5JAGh>pZ2h6JzpEZ@z)s-?B;bhQw?O8FHw zbGhEkdRU}lW?yzPhR=<=*|@}1K0OUePthr+olq+-XZ+1kUV}coF7U72HNBdzjCSH+H#xcqTd zTk&7Q3{rPUEMv?Z$zYx{cwn6JCL-8Cc=cx?OD1BAkuNolIVe=P}hpwE(KAg=)i8!laLTR*wO19^%!> zpM*3i*+7;*2{Cn2PWP#pR=}Z1KCea2Re7q6 zIc#swmE$5@!i2duweBb*xlm=+_ZSLhruH(_rR`5$>P<3;8DU@6WtIqLq#C73rujFf zqJ7ePj3@n{|KjDCDjJ17V<&kz>hZEX=*`iv_b{VQRLRDWY^=xnv5P!ruYocAF;!gb z8?li&I{UoU23oTcDgjkAXk^RSv3S#j9^f)b;FK*tJBlCTc6K_S#qBW$Tg*a{3=YY0R; z%0>C*0tFBGi5s%rlKFgBY7YquxrhraGcY%vo!5a&n z!EG$K=$MqQF^?Qu$|D$mzlIi!S^EAYaSGmBdALI&8N1wL3V+1hYKfKdNxqUlxs+K! zDdqy|H6!&JJYle5m?$J+(qqJGgFg!=^`9po}AHZ>Tx!nIIsEDPu@n?{s`6Kzu$j7ognotUVXe# zm6C=!*pG1OLzkXHJ+>Z6_vloCZ0NJh`qc>i2G1Hsrg$QOCeW1y)lX5T#gr-Ww=QiN=Pb zne8!+jg+DUuM8U}pO8|8C~A3lSYQAx$_L9bL2||)p{Ory`rlB)|B|NWX&m@lOfwbr z^>aE5`IlcboZXV~9Yb)lYQ=a=GpM7mQIiHhu3mD{J!*nh>x*=LQcNO6m=r!ahU)@t zvq|BP$iw6VVBY$eiP4~*R#vdKO2#4_p7uF)&i@L>4sokLhPgunR|);GBt3L}HuH1C z2d+zo&2+N+zU%4htS5Y1`g-U6`=N2625C)5y`d{YUkjcCxMo zwBoKCadXWv2I=4S7|lv!DXR&Wf-pG@pOex_<+QdwlbnTpKQ`k5atUPm^1q}B`G4k6 zp37Ae5M(YlGIE^y8Trq%T5|n=QFLq8G$gdEoFt;R$~n~B<%?=f7%SZg^JsDfLZF1G z4H5~>U5}}(dRALm2LQbliOby^UeCN@IBN5!+V}hO?)r06chP>+J~JP(TK<7=56AmP z;COAwUazC>_56>3C@ppvRFf)XTF7MG!JzlPJ%s10xmGDTr5hKDET8*BfsyVdlJ49S z6;@$ragy$plJ0UZdWWm_dTiod*4I1eieEXqI75VX9Jgaco1|WH8Qy~UD-aSYr|zN z9Fh7*#J*uJ>^<6^3wx#hg)sO#q4@C{7W8t4H$LcoJ}I1;j~LC7X3gPC+~nIe{!8j? zniGAs_Swq40%Emv@;hW?f7Yn9aFaZy7lEa0N@ITK$x~CRl!BpT5eK0+`T?KVBQ@LZ zJgh%XCI1YRjRvh6;a*)y4suC$e0G0Iy@`Y?LwxObN}%(21Q2xrOr(cepk^0 zRo@>Yns}z=|NBP%kHN{?HH^(l@S~9ldX*rk1Q9>M!y^-PD8b$c3Ep5N6@+CY6Rc2z z7nI^sn_6`q{T{cJ114cnkgR8fAM%woq^9fYoy8FbLd1aVmtN zMe>snBBwym5w&z3G=Vs!4j%!5J~*Nd+UJypaK?WL0-g7n$4oAggNL_!-rr>ZJxBBT`F7S#cTO+eTF7k6v;b|C>jLD#90u<#0^vam7O< zr|N=msy*6Rqsw*k-rHm>-l@CyiU)i4^<8M>eNV`3f0(l-DS2LbkJW^-?e$kCvX^mJ z$$mBgt`D*inS70}vfh~Mu&*8aAS@e8-kWLIT(;nR(zC$GX`{YX&E9n|U(Sx)a*G@B%r$O#Ia}JT5 ziaN82=kAWaUwHTJ;1i!qx0A1cKc~BRTQMhZT9q*CalyK@WoJWG_nB?H7jNp$TB@v_ z>G>dsNw|4u|NUP{v~x z>)uqniJ1Rv7!80#ZeP2uyvf&fkNesDsZUJZqH@{%&^;K>~HlFvd3A=^MoI66!#f^o< zgKR*&ChQch=C^shTuxGC310WGnR*2$>nXTwPeZrUZ~JG$xas%(sYCZknAKeNkjL8_ zIQoC}XghB35Nx^V`l`Vbq^<1DqY zVfpF|9Qd+7L?345lC&Dw$eiKL`c@D{`$LamXJ*6iAdh4r-ay!=XtJXEpUf(D@QV@7 z9vPW;wet3ZNwc-+FC}j*o)yA0(hz={8#NToU&!LEEyP+af2q18lB$Lp7=I z5bn({J`{B>QRd7EWSw=1s-hFzJk#y`t?F7yNoptf6Hd%#HjNL4Ga^hJq9{-?bNHnZ zPm+mIC{b>x8-XtcB>4q8Q`sG%`G2y#3)qMDCunU)`ib_i2uw~(`-GEP^~#<(b7r2IdFGjCo_Xe(XE^ejQGBfz&mc4L9EDZvr-*$(gWBFTkn%$& zrAWm%lP2ZvSMBZF-?COVE(>8%o<4G#IJVgJ-b{*N{ky_}1UGpJ&K{Z|&zwzv{oU`6f68JD3>RcE^>lh7A94d)JP>z{%!|OwnA?**cb^CFOe_(#<5jg?KBkxJ9e>iCX?j>6qizr#en~-!2)$ zsrV_UID@x{S@a0P!C#JvF5F7js9q8+w<2<+aoCEX_d0?gPyGn7bm)QPNL}U-EYL<{ zh{|^nCN7~ko-KO9pyEKEr>i)7cxeg1vCPq!YHR7|rE&wa^vyz;5nmXi9KB!`*PJ&? za~^D!;7s_XI(dc}pL6?veE~Z<`b>w{^`Q#yMPZ6{-Or!FrhazHD#C zcJ+apmoUHUzV*fSPfmVTX9CMvp4L2Egsj5DUf!vP%9ogy zdV!iXcwE?g$nIhz%K&MB^$r1bst*d@B~UyBipTqd;zQQ`08lcYGX15h!TAM`hv4xr zZ7WH=<4IUo9O$X02ejX+*}n~!Aq>hX9v`+vjB)s6Z6cglz7s(cmo;PoDT_5|0ENW?m)${TsDA3@#L5-=mSbu=GZ_|Qfg>jpX5VEBq12^JSC`kV&! zL{qcRK%^>Lx>8AIBo>y-=(5HQKEylsINb%Sp>=W0jv{NE;Y`X-LG}xv$%mT8CVA;{ zs!bb99#Zw~!!*Qj0(-B$fonb*$sGx?(-gc5*BBr$ntc;9aj+WYlyHbs!SgU%K~NSy zJ$KO{%e8p0;}^N`G1@4YdceAJyrrB%_Qy02!PtCXu}fwAI*8!1NpJW9LpL zjCECDi#f6!<%nKS?`f4wM1hY64)^*AAOg_$IF+oDuq3k77%rMaH;x*Si z!PlswUGnPix(;-Wc4r9h=guLYp4Pr0?SgR zH1J9DWzw)F*bk}s$CPIBDRrKwxk@$uuZNOK#SQrL*B}Oe?t}Le^SivpE^Sy@a@C-k zY=2?zuQc#{{7j;MWv>%*t$5%(*^k0&(a1 z786J~*DoXB+$bHj-BqIBWfeYFrss6v=w0iZX-2frDoJ-hFNCSC8-L+M-8&6baI zafvfG=meZggU(fPXF&v;QETO!fz6q}6a@|!T@{6%BF+z@cINPI7HCoXaU5{`C3tvu z(N&?$3&Elb<;^0NK32SrnOQflr{5~JCbBHrAJ7~XgJ6qlMU+9Q0U-Vylq$xcJYN<_Tf}I^Mn2gd(4Ce&ceqXu6b&T8P}!}=Sm%4DYjNV9XOJCF<8`8?9{}; zZz*>x9LBCbSael5(0BNGtO5d?GJmC!(V_+N9Hil0vPP{-_ZM3i^?@2|;$|a(M%`wX z3sNj`Mdj0^4RRlQdQ-8`!l=!T!rGt;kdC&~ao86Oyc@8kiJlq_*FyD0oYo5X9SQ=B>kf+mDcq8fl5%wr2JhnYU&B+X(Zv+{bMnevS`Z+G}_r=eGy6}a$V~2ZqSG%>lP-N(#$aL?ui$t32Cvl~f4Ejf zIM=I6&ZYA*`%cKb5FNS2`O18*Wy!p7;>g|3rAfWFWL`Qc^Ma-Kg}h(iMuyBwCud$b zg{YsZeTr3CnU_w>yl}c=)iTAZO_`U9I2^C+m5NezoEz`ZhZj!Gyf}K~_K{ocBC0mX zzdZVv#zj`H(avsXVoCBNFcjxY_^xm#^;hlWvf)cg6?)2A@`fM|PuG_Q)AbenR|b() z$6Qci54SqXHD(rzr?W7EicL^P?kH+7bh`YC%g`^n%@#`{aR-g3@1w0Mf(o5`HAQy? zPcv(y;#5xcDSOhrWdzXjNi<251pQW@bFZ1<{q!NO$-33d92$RWh8;-=0-oD(n`*xx3q z&jdowEpIDuY1myhU$|(~Z_)iKl1pC326e~F*brB|IAg>1_;BvOVeiflDo~R3uq;Lo zF|8kLo`nTm5TCTx$_vVh+BJvj49n!v&31i-({85HsbzM3B}%N<4k1U`Kmn0?e_3lZ zKTbjf2+Kcgu`{V+?x6sG_Gg_7ONuV$((*v+pficX$vCKZJG~{)RVX9({Qa!>+afE- zQ%>BQJ1q2q_9!oJ)q&J&PHkyh{B0>q#ht`taY2KFSf{Bp{Q}g7&q@Fv9J!^dQ2JEw zyXMG-QpO7XgGZqBzSl->>k7R0dl5}F-+!L}K5d;$J3wXM( z*sh+dc_{s|RJU=*5ioZ3I94uTK*`1*=b2W)PWmpzrB$8u#;Dgm16K6n zn99K*g1HG_2^0)&PD}pRVQDAIF4sR{2w@N^t6$j7^QlSrMCnVvbgZM>J|i_OebzDO zjLtnR<<98NCtJ=%g5k24){jvDI_1_6bLmBKdH0yhLyJzvr$~h0RBi^~j;AZQTSXGS zN8cTLlJ`4j0MtIC_jk~<$1inXs?JeMtrL=BPuo%`0U8sL-NW9XCh}vP1O%<65;6H+T;6Z3WO6J5EZICU8WDz1@_8O{=i@>@SVXWGPZy2W zM1E#dhqFl#e4c03hJkyIqV_vpJ$kw&eXa zKuma8cu`9c#xm=WVCoUpyA&;LL3r=_F<2BOwR8`s`vR>q-IilHT_QjV@2VxfHzkGK zn7)_d&5No@r`MnZ4Y{`=Bz8@^dspx~LwDhFTx4T~Suy5u)Vp0VyI<8rQQn{P>=#Xc z+dB|y=V-2 z#!)SeQX~Hq2+l>EhLHLfJJE|mqn}A1DXKS|6)uXI5*MH)3 zj$=%H1y`ShW2-aSnfbm)pQ;bES74jPVleyIMlfV-@@n*66^#!fTgsp+s1&bZ;t}|6&(jhvTPo3fh-RlT-oyLVT!A!`p`tew1(_$>Pk+A-Sm3R>F}`=A-dL5y)A_bP+)FAF=v zKjrJPgPJ*pz|}cpshDHPQ*RZ#{r^Y&QDjDs&F9xkU|m)GrK+d{f6i4QXF(WZyZq4l zqEu6wdA?JpXgCJ^8d&y*A)J6HjU6-Qz-5$9ih=Hr;6n66EL_})0lRPeTig3O`&&jz z3O}>s$>hJV`p*0KBJJy>eMKF*O|w(qVOb2Cd#u2Vp}H+}2FFDnu{~_nR@hfn0>GPP z#9fq${w$#a;)Xg3WGZ58HxB32&7P^DQQK$dP>!QXR15Bf96?+NS4LxV3hOEiz5{{o zK+kAdw|gTIr3~w}>{wF^tK)pgpUJ0GIe-us1p7jr(=V~T&aEwmz@qkrC3eofDrVP4 z0^3Hu)l+L2l3mM&i$Dan*|iDNgxqV?XXyI8{pGdlh82ltg>a0rseKCrM?;C`C7p3W zVym%OPtQtJ7j-^juIDJz836WPk{5S&bBk*0S1`jcgCjo(z0rv)&9mCZ;Qi#^*%7gy zx3`@0L~l5-rLB4daZ8EgCfEZQvtTQzfto(npLz^rRrieJjU1HCk=9KpX~e)UBm-X; zVk@pylKzOk;X6d59j-32I^G`crGNzTyH3{9M(vwv!)}!~Y(2HIa)Wilr3v0W-^MGkck-an z`F3C600k>61uW-L{cBkYBEu(y?JTo#Z**ZX7F-H{>w~X2FiLaazCu0c$TP*On{rcR4ZSz6nWn8{g zUQke2nBg#dQht{hZe8J1$QD(TF95@kTO~)(pgO>in-e(bq@wPU6O@;RRA$~f zxeBJ-6+X@Clx-UwBzn?}{R^HxRWXN%G$4X5MbcSrWV{H4hL5Lhrw4Wus&}hL@^V^W zH;`N03OSCcuvSip7cKGVZFR7gWT(vCsTKw{%-yUO2KEHj&)uL(yB+MqP^~GEOy9{} z!BKN}nzmjOox53WQ8Kl~PiE3s)Jy~t@N4F6%JJ4lB#o|+Hy=$Zh@cf#=f5&04>1<8 zcrn*kqNX>4u8xyJOZR)*svaBl;^+$+Hgewlc5{*g8LKsA}#ZAqO<-J4DI%457-v zBXf5PU2`81F8urzfxSurcP?R*+-qsz$+^!6Z`R6jae6#9_eq1a+dgV=n~G$Po@}V0 zD>fWbfKUv<1a`a2M;n4Va&lK>I3*@P86LtW!iYhcF0*kpfL9qV#^uQW%4Ua{=&}SS`~-~q zzhYg%6HFQao_Q5pfDkB_qi@L z7vHSpp=Ux*@|B4%-K4NAsGo!_X~$DT?WhJFZ%Gp>CDamlo+edLf3VFEkb*b?b<>b) z93EE;SECGO=l1tpzz{t2v39U?Sus2_DNlqI!+j2&gh?IeTPwHY?QC^$8ZSvV z)~Po8uMEzC*SR}HaBj7U7@+TQ@j%8OpX=xLyzl5VgL3W;ePd|$h{~L6qQ{NS+#eWl z;5&3H6v8vVe)zN24{yB4`a!cKv$WeBU~b-i)NMhLtJURl;>!&bYXQ z({T|SfpE+ir2F@Lgk*}wMfLr|d}ohmU2eQ;;UNeZ1-Z9Sasbg#LGDaGdV;IJp3nQU z)p`3Q#8AnEQz6Ok6wyE3;WkJUVWuIZ4v4x2{Ri<#85**kCLJoTGez&tc-aE-6(c+H zr@s|EYF8(+zsAr2;_En5Lx->CKueiwCzAXzPu#q{W^eNJNiml1^PO=OvYUmNs(}|L zS6N^)bdw;a&V;lhR}(nE*Al*Jd%M(0Rnq6EW@4vUD-WLt-2Ti<#Upp|tt9X`#;p3n ztDrm1+Ybtr9@57e>O9F+O;#Q-p1l~Em{|d1>V$R$>5dgf zBt)9ML#^mA>xp~L+CN7+Ld{nRU;cGj$PwH}DtM$Ue1IF_P0y(RG}0`YLatXdgHuX| z{^iDaiV9ZbKTwxp_?mMBmGC8BV4>TQkn+4ounKaYg=Bnu=kw4Go3^@M8-AaUCi?>% z?iDDSB@lKYFVWoV5QMfpy!ET$4UGCa21>_TQi-EUF^TwBV|DzD5V>mXXR-@nBmqo$(;+$_s zX`3nWE7Gz=TR;7QMf|41Z_jZ>T$w=Y)W9}^K}T&EeSrtA1kC*~!FHzsd$zrc{mD%l z`Rq>$MM-KsO(0ox8x*lYxzBK2^d^S1dHO6t^TVVN0I#ZW=P-*49mG_+VG}Y18jKBz zkx!Z$=aP!nyYus_DcRp=eGbW(Qlo5*M$!W%_jU~Imp~?{*pejm7%aso<0y6_jn|0N8FoEsE ztN2W!^gmP`OpdhwM#LZRAfwOD30T}KAJcGsIQ2DWfxKLLx3b_$Ib%Py{hh!zZMWAK zJGF7UK5pa57B}m0_TsOM1U9irZGR_Xx5n)Hs8fqsWOAG{9m9=B?aNC7TLatd`UJHc zoc+Ku#Z@{NR@hT3F*#tqtKeDy_N>p`7w!i$c`sucWw)8vqBtOUK zFDB?NF&Y(jx#s{>E$=Yr+Gso>rOv+mSC84XZxjrl4*ZY8SN6di81b_SF&=2pSmRPf zAZ5>Ch||7@{9F#^s#fQl8rHX&@}2qkMUS({_GjKYqdvi_lw8^D64urmO;up)_9KC9 zupQN1+!BN|Su6JvjQg+yj}|q{;f+$H*(8;pgwob88QI3;_k0ZNBgBsqp7lN2BzS0c zGP|n`fw+iJ>j5?1+m??}GiC9?LPat(ZE$~}758Ls5NmL$1UKJ z^5BrB?uMCqsB&3!sIPyf@v+w6!QVmf2xkZ(`?&RxMSJHsb7Yh#-JWwXEBH+;TvSCj zd@a$!yuW^+yV=^;zDF#7g|yf6UNhiG*3y50@R9C=Srzw&#;e3UH!E0Vo9E*-(i|on$AP1GyLT2iN1Pf;Mn$KG$n8V z(;$0u=b=R>wr^A+g9FIq>Tb<4i0WW0$-kIkq*%IGdtZ&NL^W`lV}vn&9(IbD{f#0P z4(t_cbxN|h)l-s^mRTy8J!ge_6$qtP$1AG;WUN(d&FOB555!1oS@hX*R(YYh-H4cOpq%q2g*u!yxyvvT4S$6mNL>+ z@L$P)HDJTURrs@nZl1~4Ma4FI#l~%{2ype2{Tu}onB~-J29eX9d}=f7%tkUj7e=9}~q4GoQ^Tyi0$QU~I{rT)Xjcl*J z*1UWJdSILLfKyw^!no>~8@V>MBQHDn{C7c#GfC2kGd)2Wf8uVfZ}+!8$CkqxXu(rw zxsw8J_;bA@F;r>$Ap%r!)z;KOm}lUq*xRn&|DJAItzCw{YyDx?2R}h%{ebm^P)Ik0 zg#(`6dg5Dy>Am?greU<8Adhb{tKLEq_?Rka8#wkA753GYXb0Tz?*&YE<4Cc6QN;PK zOck5UyW7q?h@M1B!%AnGylzw@WO-Cxk^S+<%`mED_*9$80)ur@YMg5uum)0=Ib6X`*lYwkd(i=iQMn3y>u^kS*T&+q;2x}}FFGY3~B{o_vBI-y{!+!+&uT~8M z&+sM2m&!nv_#p93HWqhDvtt!DwMD;%N|#BVYBz8XXN5a&TtUhuDbo}h0qUep=SGwk zGtgQ#qv-9YrH94`gUN-YYL*b-jIUt9$FwPtrNS96aify8V2`iQSY^IB^}0y`usv>U zF&(M&##8oTB!xYn{Tc}DKfs+pC-wKvM`Y_eAC{0 z@Ru-C=|p1GD4d3!ON&)oX~XOH=TXH1eIwcQ=ZPH>_+@S1tSFu{{HLMs?2|8OdZ)K()Zq)U)ZnxgsSVU&l4I-vcvtMFgcFp2Za_}9aoxHR(NjH2&-W| zkzq8Y9NY^R5d*$WT%3qF4qq{iMt!Ku`SN|u^WAC+F<|MPnLVtfeT3l$YE8MXKN=Tz zQYG|6v2$6B@`PjVRM{Npb0eAiH8sJSstY-Eypu45p6&~!UJd*W=VPfqlg(2mv6|ds zt=u3bbf3(Cj}(oAAN$MFofsvG;cdg=6D)*tsljzRr~fpTD9BQG0Y?xB2GtJa0gTt*;@TJhMt7t zU@GBhR)9F)TT-o7=b_f)B%oN3uV%SAp^526eVZ0$?pb=Bf-F}!`iIz$wfAK7PV6$c z)kZ+cyj19xn&tf5N6p^gPHhCyvDNCe!1lRM8U4Jse*@8$&V5u7b9ZW|h~i5ij?$Br z&g=xOF#9}nDeq(Lqyksku7E$3L4xy1TXu3_E1wf)mty%S?NR_0D>}uu-Gpi=>_ANeIY+c|FRfq-9SZ3sfU3^mlJhU`IEV86~p4ve!|?EaLxv9nbJ&X ztvqNS#c?Nn&ZY)yYR!&^Wxp8;a3j^5*2)81lfY5c+2#F#z4k#g^Z{)?lMz)Ydqzt5 zsP01JkvUr2{wM|Yk32f^pgrSeQwJorswNzzkD~2P<{Ft!NKsvr98olmJje~?6~Fm6wGdqk z`)8Whp(1N_d3t?eI>XNRCGx{pDqGa=9W%dZsXnJR+sD?u4PV3?3B%o5`5L3Y$XaQ_ z&|u(I`_0UsLp+}I_P7~p434fD!?YEUz|waZTbyDP9?IO#e~ zy8kW&0qsT65-DvOG}@?x_F+d5r+rvG8w1-OP@MvAxfSe{1L(GtPy` zwxp{_u6F99W&){Bjb7$K9h{Gln&+wb{^XyX6VSZ96-X`~b5iPBXQCEc=(B-C}eMkT!KzLTTYTUSc$~4&Qn0GkAvYF4!?kdprJgi{xFa8 z5|*+BPy&A`%U-6`N-BcXGF0ikv{D%oT|wH??B|sZg6{0*wG8*hGeDG9o-{zKN~%FI zX2h#v&i6ImD{Kx79sOf}zf$XZDH%F7?16%I!B=;8%S-a}T%u}S$0EU8308nPG}4VQ zyxRy^2#~-td3M7ecD+6{mt1Y=BC(;lnuEYD8=C5__e+JgJY=mzW9|bdQ^jDWt7i{@ z_4Yd8K$W{M4O0b<9 zu@RSyG^lSU=v!@=%7l7y084%6~uk8TBFxcZH|ul?~@>`SD=K63NNgkCAEs>z@~j?tL1cA-%gln*0bU z(i@BeM#ww+NSkRw4e+Wqr0(~+<6(BSaSa;O&GQ~b^=`;MPs-idJ-P4a_P!v9pI{lX z>%<^LO3&yezjd~R{Pavur0B=xS(LkSe~Zs({mHZ z=Lr`1^8k7L{criz_UXA3|Ihi=_UXAlpm+Gcm9Mr>&$;A3?z{o>6$cKu-&q9gUe4`% z6R~%|>0Lu%)vna*oM$ON##+{3Q-o)s z6K)NJ6NlfLZ8H+HnSCP()U1(eo|{TnX42h@GJPT9u${ZEgv`Wc`cB|*;A}hH2G&#m z<^Fy9$JYJ@arXl-D<$LgO3pl4m3fCx#RE-UnH7`>^%xQ=gRo@&^t(r>R zdsQyChFGgl_HJ98`=su?bvugJ@_|N2oZ!#886k4UF^?+;Heu>FB5(k}K?ZaGskhX= zJSTlLl-fmmBjvBaS!I%~i7INpHcSP#Z=SFVrjBt-^k7B{!r=(vmgSVS|HhxQ}p>d$z~fsHKIU@DsUsi1AT@=s%|s=x@}Y4 zaEeI^kcQMM<=m>XN$>ju4r6pmE?q&EP!MO!eA6}FA$Q64IH%U#g`wiPTf5Q2v4y+V z*imw$sP8cS783inrvRY@2;79yBD2$F0@GuAMxoZ~HeGXM-S=(pmLqK4b|D4DNpG!u z#f|)%8<~V5MRDdGHLIBY4rT9xp>QN%ul=aj+t7sQi_uhPtqYIUC1Ex6juGlD_PP=!D<_f+Ur4grr)WTQ@wzg5AB%OjyXE%-mFc zGOCajd}S_`X_F)bKX|7f?498Ech9()=F_-Y+|D7R$QZ|JCERcUhpc-_nAu{5R_A|` zkytIAN}H;DTrIgAahNhEGto{4r|M}4vJUEtk)F=!ROet0N}^`2My|K+JHxu~hxq5Y zv5oI`W_BiLS*u@%qAP6<2kU~Y%@6mFKnmP;o*vwGZgUB4pPg~11Sq8xd}D^dy65mS znf}qNCdry)W4{q47TXZ#2nDKsC8vo}lkIWMR>z58NS9-EoJ4@rB7p4~H=iL`U|shP z5{9uyf-Tn|<2O_FMzdVRiL?Ete~mMdQIg99q>G0^7=o2BrZF)ruvHf`2OGFDS$EH4 zuDG0Jb04{d0mkB?5EEAo2`V|Cdw$Osfl^ip!(fS`kJ1d@XPooAwekr9r6iogrP1kQ zwS?x~UrQou;^XINk0~~i31_BrMbx=E=1hw_7ij`2Lx&9>D%zRk7eN!ZQtrZ$>9>wq z*DWPzZ?o=O^(o!)%w=|Na2tbVW)W*z>%K^_8$1n+6=(X+3}`ZgFO1f1!YdfK(DTWY zy6O_&vTm?sIm5)iIeMXl^XuquZBXD$d2A7`N{8 zXl0vPx!joAvK^z5LP2FDl>WDZ#0iuD^5eu(cZap|^}y4IUkLn-Dwc7#d&L-bZx@YO zIC6}K{i|e{)dW;^1^FB7%V)tgI`lSiCi^vQ3SB;r9*x=)=h&AwQRQz@6TumjYXd)NA3w(4x<GeMHyJ-P@w%Pq}`Nj#Vkr91&JfM-xDwU z4bKMY;bH+{5d$eg#e_Y$=e+7J{8T~U5KJCbt&KEU%auuN8s9-0Mdj1m)ro8gpBSa4 z5?Bd${FOBBH2mM)=!X9dPF3}e8{7f{#X8_N_wZQ5f5D>fPz#N1QHmSB(T)8Z{tMhN zX5ByS?_qp<@-i5@Amsc2^AG!2vheU;kbDQZXWPl9W5!z;B(*;%2a`h z%%`2Pi1+)R)??+V3!gRNci2SV0mmlb#^yavW zh5UXX1?|Xy{7{_Q#d1fKZWc9!n`mYKsYzyVP^9}cLNv8t*d6>(A!+5K>FzkepfZ}o zMsnEXEY>`q`7>*NtJCbMdLl_vIZhF31dK)nsfRrve30G%Jzn_Ogja^t6RHZ+ugYN< z4wSV}6{FqEm=Uf&8?Z-k@~wT3WWrH^BeXhXTJ1?D#i?x!1SAvTp8mJ9oK31ol=o+! zdYGZ1nRy-v5rQM>?iwmlVlY!@25kv)(DF|&^XjhEwboh@=Z26vlJ(cZA!LE|BO@(Z zH2L;PpCKI#*AZL8+BL5+7gMM6Kso#r?=w0CFE zLhVGNAPLm%(tq@y+NFMzc21@@O&-w6j8;s3hKazLw|x|AWi9!62KlnXZbYH;BpGMW zg%$Q@GoIsI4J(Fv;J+9SIjw^imR%TDpRz!u(E&v-D<3hy6?J2T&Xs`{UiKxLK zsk0fRuhF$XR;O<6@x19+ot1>`3~KLO;a!CXf0;bNy6?2v_UXpO?zvTOxjaKY%Mk#am^D`N|6)WsI5JvjF6ebrc@9zbK8_kLPkQEQq5*8)4e@D zZco!Wg1B)W#s8A^mcr zGhY+&EYyV(5@IOfiYhwyNph-1FI1k&t2KI@O* zpS+NQ*}>q;gTVuXK`lV^N7_mN`a!KncJNQ^+a``J&zZ6kJu`JvHuA_1GqfQFt?lWw~t)B5wq^5_7L`YJF zSu6(Lp4+{JAgfiRt~P}_mc@SsnNAVEo55x+lqK;Y=-$#L847Wo`BOvaHii)NGoMUS z9VPvBMWcjx-e>ypv;1d^|6J%l=lIWg{=sANnz#I<0lm+_ zXI^uFD5PHF=>{ex^NKj%IJmTvSNUsl!-e(%W|5M^v*0;fW!%8E+11vaheO(6+B|wE zVr)%+GHT8;-0%lVT^Qy-R?mI!;dPC6Rrk zcRS1jwzrWt8z&vhy_4@vAwrLtxGfQgp_BkMldv`f zX7OIidkgQCyf5Tk6XqPk^N4F=yq3{JHN?qet%+$reRP!7p))t2VY0j2t9uswC}9v= z79{I>7G7kjqdhirtyqcHho`n^c1@a9WeE_}tEGDKwUW8kc)Y0Q{y~q4m+{$SvK}v< zY>P_f`;4~PW3*%~@uun0TtxYNMv$a&9I^FhfWJ}d95WBtI&V3Xc|a2a$MBdAX0g$v zskKG7pAU2;fHZcPvb{;C2(+;Ln#bZ*BaL!3amN^|`*;OeGhtSLQV_hJa+?{0Mc!ED zLVJx<5Lg0^N>LwW^?F<4Wj%yi?h;o}6Yz5H(mah7ZPa*+q!ZXnN1VTlL~`zU%38x2 z0^UH*GnCs5_pw(c`UGpO;W||MR4F;#7uv6>&m+EGZ};>P)FPXNzXT?G^1LrctEP-8PDwWHP`NxH&rGA{l+MxJl-y48Rl7xQ-L9nLC` ziyKMGo)Sxq@!b+m{X2vxuSsUHW+pEQ8L9~N(RC`cQJvFOTjMV9gpJ;Rf47Lyd&}|i zMX4rR#D2Oa=1CN+)#U8H8%Q>LAvaNX#$%LM=6a3d7$-t7P|C32(*lm^0tZjl%Bf{V z7ghv%ifY+|t{Cl1n#FMqsK=R+ z2X!i{wMcF^F2KT^05Nnbf zEk4MFKFIlAU37Qod`bvr|8p^&!s$-dH<}X}<`fVGsI2`Ll0@1v9ud|$pX$?EhbW^w z;>nPR7@j8^0$8kcmpd4xZIni3SnV8Su!>w^!?L|B!EFKSr=5J%3Lz1A0>)bc<1O`7 zWq|{uk959r{6J5hhElA;y5SArEF6Ubs?17fRRZe52TjMV@|w?j2lmAJ%f(}SAt+p_ zUZ7ob&^$p?`PIx6!WfI>3J-CUky*@~G~2dhDO-SFKdokBCw0Xv5HJg5sK3kF_+~%P zSF3aU5J+)RDl(3NmVW8o&<>Gv5FS{R8c^(3YCw%f2@4vTjl65BZW3a6pDg6?-b{E# zdQ*U#ZMe&fHHU*cX9}#QUS%|_!s%2KZA`J%ne%=}ibm`nC#Y7MVwy%@77R?#p5xfv?=W4>7V$l3Nq$Iu*<73Llx+S|_{eE{7%?s|pg zMU2t#>iP@907VG+Avr+uW?yYkFy!#P;L)syBe{IN^ z<1)mQ$RqTk%lvzs-8+SLH%tjR(WS?4pWD5ASOZ|6&so>qHjKi%cYVCs6fD5c4Vy_g z54`L>z*~Q9zgE8IVIhG;W#~iqTz4DAJd2pNJNv9WrN{B>9x||?8&z@tuSg8d>|U7o z(%u)W`z9y8wClt<6tg-!8``PfJugwc2hPFsOVCv1?pM_eW2doLvVHoP*4M9MfXt-$;?y>_wvG$lP5oLzQ#4DKSS*H#CKyrv3Jk zLctiOST;%zc$w+D2X0Dy`9`NjQYsprDA?0qPiM>z;Zyse2w?_syr)xJZ~Aku=(cwq z-tShQk?AjFRi&+iV-KI%*?X~k`K+P;3Q)%23iRl(bB?Bu4!17Seq{XctBjI(=Gd8; zBSrRsbGDgF@X~#j+D(JkKfp}UpYD6zny@W>^zAihNc*h`8#u_+Swg`;h}t(N6snPd z8yk6B9On+2g&B)%P#0lu+MW^r$@Go5_3&HePjc@|Ybf1!{_oDWCT_EDx=U!>ARKVu zGZ}Im;iUI|#$nXy)JNwBCHAU+gaD6P-%{$&YCq4WBDPK47-l>BHNrzM*L3)+B2q; zp0?aY>Z~g6a=Ii~b<0{Zn8T>(OK+=zDokHO4)N5z_O_}G&=%$8$l{DE!M{c+7-{Hl zJ~A> zo9-Z+bF--Z_#}dWvYizFZc>OCl_F(bwEbR5xeYkx@hV{7R71Us4CSg`7eS&{!)9;K z$E!wKZVC~QKJh%ax)3a|H@j&Sojp}CA}Z|u(}LqsZT6kLh!@!XJ#DST`wn9XU0j3{ zFkiJ+vH%!iU%1Z=FS0LumQm@33j$j*eZ%eAKiS(D4|Z+V4L$|Pf^&E+vTOS?$A+09 zwcri=!nf_K4pafl>eLNgc|%jqOF*1eoJhQ_CV9r(ts+eKo^6o0yY@tNlHax1a^}8m z^l$W92+tPky>WP`sRVK#LgdfWBMKu1O6~=6KYL=6;mo<20Uz2mt-eM|yC%SA%Bo*RB1onW# zo!jMc7G}^AEZ|7ZkB#ft7lPPkYXJ@WW}C&9kTwq?Ep2X|8aPk<{_y0gb`YK%%CaH# zUU;+K3r}Z@Rkx;D6dcSKEFnFOBhS1&ccTOWNl9q=oO?8A$TX`*oyP$zG0Xfpte%>% z_g3sZ%#i76lL+BOMB$#47{SJtV*81bO0P{@9cP>E`fDyt~?d+l|p1Zf)8XWBq8 ziUv4giM2#q#ET@6mRi?NA`CxG9}A|KL#)*RH>wd@|INGl``L?)79{`K&T?m&d;qDT zm!T!iovmVt<+LOrlPq7Gd|gtH2#2o$g_!sq_{8Oz5XM<+J*;|Tdb1$vFV!eDx=u}y z!po_hW$JH??*^1`^pBzEnILQ?WKk6SFDaW%N-~+IN}I!?IKzBfb#&qIMd7LgoZ5dJ zCvddPh@_)Z-J%@%>WKy54x`chQ=zWOL5T(>4Df_?!)QuccoOfWyvMC{fOk$!(jb+V zeSk)3tL}3|vnDB1q#FCZUxS*bL_LRzDrM}He>mfW`FYg6x*1Jm1tv!bobl|}_)>L6#iCczo^wwlzk2fKLhKWz zeE`X&LNd>?5#F;x@3?Gszf54!obrJEN>M8sIBFxRozkK%_9;z|8KnVvU8>GJZXJoOflVRSfixrBOw%{M}qehCb8;HA1Tz4J!(Qt zwMi*eQT9>4M4{JNENMCq{a*iz8s#k3B%J@U^SCdXSo2>VI_`_+)BG3JPvv^hG>_)L z*vEa5;FtgMUGK{PR@Ys{H}P=lojy~jQ2zooMitfLQTiEU2S$St9wAjZh%C~1T#ZE2 z&oL7s0+mNKw3m6Ih=M9d zP*62ie$7NTz*{FmTSm=RL}9F`W9LF#n52|iE4CHc;}g!}76_C5#Y*-UtIw4vc%9T} z&SI&WK8*E-wPJUXeNl;hol(7Au5*xePU~d1Zu&c&d)&srsMeF+sq^T{ZZ40B7ky

ZvGcqgDsT8O&)ywdU$Sf@+5= zD+uc#Ry);lf2(nXpSXFL{$1W|Kh=BY>}6Q$bUH$IEK&YS_I7e<`M4oo)mqUy0h?wW z59m(q76WPLBd!LX2P>NMwc}Y+lpmV|dw;#-OntG{FmO1(1SoscqW`w{BVKj>7j#NS zuHy{Zi$j`*yA}OSqSG4}nrVhQo55p;)s#^GR~u-5$8_;mYH<{r$^AgQZ8g;f*Xjd= z;1>gKUGdq*gsmj^41CT14zAqB#PrQ|iRoYEXU3QLxePn99xRitVB?X;OuH|WEhg|a z@BQmkuz_Tk*Yop@Y5dF@$Imy%@-w?hO&4p>yiFDRn;OhXGWAiyYg~gw0~=nsuGZk9 ziRlbhM@*wgF!F5T34$SQ!CO(IK8mn^y|FyXd@P88+hZUN&5**Aa56S(S3Dj zt)^pS$SSn=LjbKzuQvo7cMAMmHo5E`=sokAPBU>l3Q?=8kY-lpy2ciET^dN~infFs z{4(v4$;WgDxKx_dq5f$N!eNfvBkygJb&1mapEoOv=;(kzjvO>iOK|r1I&3X{3F#nNVas(|w96X8MKx`i$3K z&@QA1v=*{ zF?RJ(LhQJj8nmNS>c?2|0k0Dh)^$2J#Net6bkh(+;6DS{6H@tB(%if})=23NiP;~U71;`!a$H)Wf zc3}-R1f4wmFCLwk$*SW^cS0DRmL!j|^S(n&zf>Tpot#t~ps9{88C8JMsN~a*9+Eb< zM{TV$PQ8L7g&?}OtOor57&7B95?3D3bUvsbzu`Z>rKfzrUrDpyjq_&b;t(TX=_Mk+ z3&K$1(uoAykB}#@Xk_~j#1I0lpHLmYM385&jr9&IsC#&TvdZk`HR-Srd3Oiw^bTr)9Mf!poM!6=O>BlgQ1DEaLe{z&bB-C0P_|sH#8Fo6l5w}R zkTKZt&B!3Q^Ylu$uB!y|&Qx>U*%%hrhp-fN!zbHQ!&*y4GcQ^rkIc3sA+s1veHz1Z zogAPU32g3YkQx)z)Q(eH2^SLJ3evulbd{Mt8nAwD3N6eRni(wgIR*dcLaom2fOJ~J z=DI)0WZ&{KaZ8O~Q&i1yYC5}pYg>&fJEWFWkwfZKm3qdSnD}E>M>F*tGY?CQ+cOw$ z(+k#h-x;jZje}LIwnyy5paU>1HUTek^LQNM-Qhr ztdMk4k05Au{0I@Jr@k2A1-X@qHn<7;xGBox<}OJ>9w}^8aH=7Nut>q2kjPWRDAOSV zVs#!C%8wShEkV=0c~H*`g8BvX!%(U^4%BD^%If@$5`kv2$YbA^IwPbgXqlmY6(r zt-k&K`8j-HD0I7T_K5{;8mUw~md=c7f6F7T9k31%E7F~;JoM>n7=NE{bJ49GE_7?3 zd+@sqDh(oIZ;hbZY;Wo<)xf}Gq6Sa!d>uMp{Unsw_J^90+l|qFbo)CVh~i`ksswBG zh5elF!RNw*4Ky^Eey@Y}3QJ-@#xZ*|cPK?HQwVD5vk zc|Z4qLvky6*#~8>7|cG3QgXkdw%XtOp!C7P^fIK(Y0n_v*{)eo7`|Mmejh?gv+Zj6 zg^#7zkHmX|;UQm8YOk9=<)=2?3|lH_GaZG(y7rX^lli{ZyyEqB?z}+~{{dj~W9{pj z1ic~nPeY=|3ajED-NUeo=GLL}%v=JYSl1P66nhM0u_`n%gh<2LVr%sV)9)~l*(Z?F zR46z)cQ?ose$w3|v|S}uorlKE^b*wLx9Kbonn+jBJPoMr~~kY7~HPx%V!yN4RSY zWwr*_y@xW_h<0<24~KG999BOG#ib9j*3$ipjHO@Jptup|jI>xCvq+eyNT0TTGMHj zKeQN9c|xS}0aN*3J4x{N5L)`eUQwmJo=XNr5A{B)EOxIo1X&+kV+e9;sK-Qr+k)H$ zh^TpLI`o{$pRqbV+c)`47GM!4<4m1z%!_d_W5f`JF`~kzX$R z!3nc(cK~S=Z0Lg^NjbKYM2x~{?$rMwp=R*kDxr!DYAAgGc5M~8QrLO_1V$e>D_`U< z#3bH7VfK7M`syGT$u501kLNAK(ocT}p7)4S{0VX5K>mOIyYt_9NF^CzPtKY1Jp9iB zFcDuNR)>URKiVVCpABaD6Kpe|WxCkD2T5l^^3kUaMt^!p^nVUU|8+?8FJZyUk^-q`Kce_lTSP&w;8I5X@d_j7Ro zAMLA5e%1fani>Bt%6@vV{$@FI; zf%d#H*e?dJQ6I*`B6RS{!13BNG014*&6D75ZyFoK^-zkPZ7&lQ%rP>~2sVw!v zLj`ecg}ClkadMV!E`)fj87}ckpz76YK5N}qcjYnfNco|SHP(HPq;$Jd!^e$SjHR=m zMY*##ldZRhPHyacB=re2B`76QHpv@}<^VTJqg2Hn_yh2Lvs!ImJoYphb?JPKGe2yU z!N;rh+ z9L&Bv)zDj~EWPse*-dJ*SK-u@o#UyO7_HXotNPJOV=se8io*bna#Jy#h!4RaAFIy* z@Ri+{2DZ5OwEY1O5v$wu5H;jCera-cp(!t=g)D2D)Ee4ij9Jj$%)>a>yLp5{qMYS& z(LY$L>$Roqf#H_<{1!%qfs56kaOzcIyYw@$E;Mq8}; zG(~wB+q^U#O;8+ZhNb(1N;8N(GG*^3QSQ^E@cNs}qlN3+z%^g3)w|OB-ofmBz;GnH zz%Tfx6s(m0K}tD#9Y`UdQ%R(5vsN>3m1?O6ue-M}{n9}F$_%JfsS7=k2s)%ti0PIN z&%$9FJg$ACXwU2$8v0=`mBMZ|K)~h7 zt<^OFvgCU|yB9r&xjjYAZ=?CBHFIC1dIR=SdH$L-R{JsIrJWkNxAc(;dUb2hqD@f> zsVjfQt&aBM!3JCE6OvOe_ayqAIbs6)PDAWp`cyWvVhx+g;=7ZOYRq zoJ|SzwoJ9;@xb4St0~HV{}tc!T={tZ>)ChdkS&|3RfS3Gd!O=k!QM5^f>r|Jcm`{p zGTPGdJhB}v(9ct|m#v{b{k_|d!)Mc)$_U!23zC@bZKPxM=E}rfr(&MJUwjxWm0-nR zmq>6V=sTfc(CQAHS0Ioti1_TJu}BFQ z-?D#>(4}!}Gi*n1GlRa=E^FUd4GIii&B&F}>@kA|59;Q+AXmaIodGJnq#d7O*;{3GAIxSN4N-kcxIpeGwJ!*{!8JCU zZNYo&3ySS6c5{R+gS;=qRcEVyL=3hQ{7rSrCgJ@2e5WCZ?bO!5<85CoNRDC{CQHr6 zfV^t{Ew#V=$=;ARA2tLx2S*n;4WaTqv+dZ$d>>Q1FgI{tyxPB+8Tc{E;<|1`EUKPR z$vj11qTItFwXt77N|!zrNiQ z^kks!U{&AuK>MLgVR9s2)+0uYJ%<0sWYOkAd3BulfDmT)-9`Q;<=;VCsqfZ?w!LJ9|KF=1$LOqQ-8u52>Y4xJwsuw z0G72nt>i}6UKbpr&u|Ezd4{q!Nw81ct+r$vH6_7;!SEh;0hcYJGQ9><`O(&L)^73+ zBx!!JNTu)O)G1P^PQajg{RsQ0$*|~&^pSAuNNu0pa6PHiKGj==s-0?IlmbPaKw7$- zIJa(G0cQr-1JL$C^~qMpW|CGHr#@u&S*!c<`^bg}$iBOY!Z#FF^(LnxozOpAhq!>L z53fbxi|J~)zBkT25q?K&24IrO-bp5vSv@*+J9ph~z?bX*U>_OTHqun}rhWtc$IRf& z)i4RF1*-Yb7EC3jJ6?uZrqlBcJ6|<>2TpboG4Ge}qa>i6gWKXXXOuGa7n%;YI!96> z^(;|oLY!BBV?C7JcafpbXzovRl21Pv`UJ-Wp6Pfbbt)ZVb$m~g`_bHd9)_P_Da5O$ z{P(NRQXqokhjt#`byiqZ}!g2Yi9;_;&^p@KNtV{4bEe1BKh6g zV~VDi%v3%`AR(aK8I(DD*>OFn!65=Toiw>Bz7O(+Tw(4(REwJ#%;GZD_nw^lci!!t z?pNQ=eVq2H`eZ+@8=ja5JRhC;K6sG0oHj7ayMLFEZO24-O;hf6fDNuE8_hyd&cSq- zN13%WN`swGGV|%CpO{cItD4Q?`m**7GozGGvVjEDrOGP?D=s9{&D9;<$uq!IskLM*n8KF* zxcOLPTO7Hfr=Z|US}jK<;=2YaXehI(_-FV?#=H~)RphRRqWBz3Z`S=yaeBL_rmTc~ zxy$(ikVkCFdqG-x*bpYKidig8rn6u7}YG8SvdCQm0?m)1RFzqO;!S}Ay3r-kho zo^$ww1BXZAsdJ!J0o@>>D zeKMmWD#z>5F_qSm7s2)r3l5W$<7CziU#2xIN6XoW?xy6p8sSWnMhIVx%g4%9kLFEh znpQJr{0?o%m0vLvN5rfU$U@_kn%u$cMc%jKw#q`UarYeGxF^)OOXnE?#ZFDoROe;V zytg`)UUed4y{c5uDk&lgZG=&ySSULl3!>wpSoo%jk?t31nr)u|JX@7YMA^eEdQMXe2aC!H^yG2Vx z=C7TY&D`?^>QIusaVFEp28PC-(k{vFb9i=k)OTV5sE*cX^ zepLOTDMOX^SCjkHA7A)3{ZZsj3fZq`FGYjO{IV1RFI9TgNa;;w8ClPar#y|xHXD91V0U(wag@D|7`G$QM$W2D#xvX(G@i=Efb%}R!!yO2mQ2xi*;)@n=!K! zJksh&oJ3wi4t@nmU`L(lVY@}D!@C4^S_Q;wuJvoSIzBzzOY62&ax)t&%x$RPw1roX z?2TOFgl-4#3EwTVI%NJL+xGtgiZnvrjTnBFn=83ffqK>q)KiL@c>ax>8Lm-<kPp--Ap`dV#mwR?+{6EmwYPz_Qh&%?Y}Q-YY`PSfsg>c0r4f_ zHK>(+ID&wc1Q7Ckf3x?=3(|X^=ktH`L(bl_*UYS0vu4ejHEY(WcSpG=UTEGfS9RfwDAh1p3EofuOaxWyRO%M1Fyezbw!j=w0+ae**S_ z;&qF*>)qbxrEsl)J`}ID_j(`B(Q9z+qW1+gY(?aU5SXhJB3YM=dL-iAuxxir6}r<* zICJcH;l08@(I-7dP*jyTNvK~7baMD^J5<=}F;Ku=L!%Pjiw|xl$-j_{j-vyuR(&#lCYt*eqc#{^7STcw%)+A0l)D8-S;>Kq-S_!4Jy_{A(x ziS=aS%SvvCL5os-+M3w*BeCXT#4{rWJFYKsocY<#!m#}*SdU7~>`lz?O@uBCZfxJ# z?sBo@i>AL==6AmzI~cI;dyoQOg+&5bLhOU>?xV+PvI6QuHtZOJ7h*RIq-pTQKoEV?CiIXDy z-b^GmtNtw*#k6-uST5$JjBRJG%*AC+O^F=Vv~6l$7mQ>@Uf<&n0M3_5+4=xX7{_I% z7n!QZJNM)h#EtpBD-p@)P0Y&dZQtFVBD5QxmKDL%nqpn(dYUJ4ok`+&MSUEP%+iXA z)EsrEdpf5T7zrAF@aEv94&vsfF;x1+&!URW=ZSol8GFfj*erdx*e4mPL8FE-V8G5% zDYVnx>(u1%P=Pcx%;c5q4rhx_P28py_t!@5L9%b_Xs;OOmI56<{)WiKp$NMpWc~ z(j5;d7S5T;Gx%os&ARV?9+R{9E*1Cn`3dKeFw`AMmK6U%faB*S6;rFUf@dGlzOF!)lFwd>Zfr(62*rc25O;@ziSwMp^328KFLjEaSYE zF`hc3+t{#dfn9nuXr?a`nQ}6{aqu|Bz}{}ji?qcrhR^@<*%5O{<1~^*Afp)gLnw9? zjJ*eQRbWHzP_N7+R9eOTyiw_#j!`D03*`a5N(h*%n+bW16N7$WyB`~evxg+sikSvyk z&j@0m4Rb!h?wq&|hD-if0^)z3=$z^t&2o9XRcF{wwnV@z*jRf=TNKbhXX>8a@TUzc-`hL+@rTKa2*mekc>N<4ad zdz?*pNS{%qDl?KRJ*ieC#FFb+9ML)Bp>2(-b9aA~9z@OlC+s~F`BZ}`YZFnprDG>5 z>XqBKALuj^A!CWWJxSMb5e_@ZO~$XG$=RX8MDCASJB8eHS%IP0jVHdcXKyG&%^sJV z{5D=#%noVcklgM~a;5{{|C>jHw#oukmpoY>TmH~_R`rJ-QaWY@j(qSz_q{0q(<}!4 zM1AoF&W(IRBd)!S^N*2pvBxI@<@+LMaH-X)(G!!)fV(7ju@!%k2X8FxkquhMc8eN9 z$9dzWAiA1Ts;EdZu#(@fO69jt7PjDqPuh(fB$m=TQP+)(V$|Kh8T*O;ZD0L!(9y$f z+PC_+K_ctu;dU{flMm8!*gs`bdN(;6-B(xF0qrRP1nrcH;r{VCK<|^U9Ymdj$Tj@0 zcOfie6>C)ns`MF8aiUR)KH0B!jUU*q&!?L470*`@LxmiZzhP;9wAigmgz9XhDs*vw z#exSJjB2rqxsgb9Lle`(Zl{sVR{d$TS||_Cw~QkSz(8MF{*9j zH`%PBNc_v>FKQQCaXm<`g)xNKs=+heWt!>EpGgUS!}o`=Cf+5O)6ulQ4srFkL{{?q z)TDxJ=+AF@#y?X9eRv%JC&8Wqkac$ez$^i*6u|G~;Rb+0oeco^x&VG7fMIlEVtHX5 z)tPC+-t*}nk}2vX6lVp20kphL{zY3XTwbUWgsp7eO%OQj3k=BZ7Bc1AJ=iACNGJNj zS3_L@nVwEi6-<{R&yLnF7PN_((B2bo0<4Ox0jpla$|0&M*EgSUZzD#L$G2SW{niH_ zGsu+4rblbg{Wnr#ZHl;B8GVmVjVmwnjabOW|gQ}z)Q*Z+vEOW zml=3`sdB##rhKl_%Hsr3NraY?UYY!}j8OfG(fE)1+IsjIudScym$vTWSCc=hk@#wP z#rhV9${8wCrZ;+~tgTMlT>8(MKazuc$9W0j6@7NTtE;ky#u@~bVN$M9ARIp>WKyQH zKuo8EO$xCAL4bvF4%8$xOTP5tTYU-)?-&JQUcCzcvq}>_!PqoE}T}vtQS| zGZPC!<5Nl+7fzlk4#AiAl)LqO2~LbQ`^mH zH}4MLS^6?2jNPuxti7F^vTftIL3G1a>t(?Xxero~^n!_AlZZlS)dzV7(0xkZ(C3a& zQ>SL8`30)jpWp5R9{sHeKcY9*A>ih35`C#*;#_2JjFI)yvKcRks50BV8luS zDZ`A^#_2$Gz=4^O#wPP!CNmKfd}|UWtE&{~VWI*(Od3mF1(3Rem#Y=d;TqYrY66Mz z8XSo$FkZ_8OO80r+!4#BUgFz2-L9As*N~TchJpXKGF_`blNAkOilRYGRWyicI^8^7 zhx2FX={q`{f89j>%oOk}{h6&l*Xz%BzwVwQ@t{h8aEI~2!&S7^^!RYKh||WC$HSg% zzeP)4HPhN*<{UOgJ@&+lFrS#a5JO%QcWQRXe~FCAGo>R-N6=zV%S%%dWPOp9Wnmy1 zl^h>Pz#BaR##ZQ7_k8yv4GSJLRz+)P3?eHM4(9kWVe%9ir2Ye3s3kA9%4$9w5))8L zz|JjIwT385SeT*>{Cz{ibJvk-huT*0=rTkI@@_AK=d#QK&xecG;wp6Ngjp06Gjqc1yJ=vNWNZb|t%O6tzN&VjW zbJlFkdIj(ghRH~Nc}^sc*w15c;KgD%hhUK2b+$sdW=*hL}l zwSWh%CA{=@mr;L7`>9`eE(b84kPPQ34WM)J7zQIATV&gQuHN~ zD|8ot_vSs3HlAz2%pCy+hAlF4UjT4?%d>rJ&cB|c2>>Y{{|sVKY4{O_L*l95@s~Fv zV`6{b1GxL-@4)Qp@rGp+4^`u067UE}qM4X%nB= zy^jp>J`mf9RBEUq8>M-99)o=`!ItDHS6gJf!oM4Gt`EO(Bi%9LYBm`PO+>J^#q-qp z{D-rN{j2emwlLcd4~7{5|KO+By!a<)(_DM;M7}j|$4#+&r!#g6*TXd*%r0KbkuH1j z6h0Y>+7FwnKJZHEfI7~!8TR5Ce5>CO{hF*2OJqTVed}-Mw{7t(KB@M$aijEO{EOTX z%dr|(6uK9^#Y{2Oc|as|D)a2u+Qt|WU&`0ropQ!8UDlpm+Qfd@bZ*mL$7ka; zIe%n7)ZZP`e~ITc%-SkHS7ssle^!Ao0^{E0-U@s|n-LuK8EPX;DmZ6c$eA%iVn<^Q zTW^PbuyhymQGxU5Q^4VA;zfOhO=NAKvA}s$?%Vc^xz5kRP{5v14t` z2|*ow)ma=6g`WQK+x&evq-Tm{Dl2jpcadf%JF^;?AsEObhc#REU!^)&XJqG0W4myk z{um$+gs@~<{**Y2U6ZkSX9l@ODc5Sv?hpJ!pfkhH(|dTJZ3SwZmzTFfz1gdWxmNv0 z0_S_@%@?~3TG#I7Q1P)oW&wvCr0^9XK{t-HYU$mTxlNi zoyAq=p@9BLJgkvGdySf*VPYdLX0tSBMCHj^u2BE#@B=NT!|he>t1o(8e(@85z*m7v zUDDX*t$~q?x^JS6AJkthE|U8&Q&=un?W*UC`1hU?fKcXIQ)Cq&+PtdQ7{xOuY z0Z!{5v!ze`Lk=3xuwG+oDP6;u{Z%t!e@5~b5TtV~@x1yj7k{`Zd9pOM=gw8BB2f6x zXk{CiPo?kk-m}7+N_PVmdsU;JCDk{5YMxQ-*%a3EQNWk1^njcF_d|a&-_zdzdC6z^ zK(Eu|FRQ(_+kK;g*k2i33;zb!@1)zrdi11bI_~?%`jh5{i1RyfYB! zNNN2G|iu14;IB=twACSW2HgX$zCq7sm z_4ptkk|jT-a`b?|yo6s=awR;|uT1UCNWMaXsI;oY%d%Ek6p~8)2Sp8EHBfuFA5+x&jsuzgg(RXGb=VlBD@dG@D95%m2%{P>@e zbPSPT1K!**!Dt>V7h@kwbLldT21eUW`vsBMf9=WSzh z8QQ&VW8h{DtQ@LaN#5{TgUeW^GA^Wy)QkFh=HRb?($`$RCZYS$_6U?^>FWhxS>njSwjDIKR6b?$V~laYUwURBIz@uAW;cg)`H%JB}qg|K;!57Y#88B?R>nqe%iH> zd!4d>(bbWfTRbh-zB-#T|HHTzu{W~7xjx&uI=A_Qq0K2UT|m&39D7Ck&hqx#UbZ)4 zjBo#-dqd{5Z0@J!!vQl{bF^Vvw%wk3Tw$Lg)3_Mql4+s&ms!t;?Nd0PY%N{Y{C*B? zVUDMt!)9A1KxFXd9F=i(Zt9od7i-D)rIyD(nhBS|l;lY+P+vj+hyC_{O2g@4ul?1u ze@N=b9$${6^;NXK(zIS}nU-rU`H3f&j0Tyy&@Vqt4-R5Fh93DIJ=Q`gds?n2g3>9P z%=f9WVL^$gvC3ZGzN>1lBUSb*>)=RD^bLXv%W^%GE}+a zi&Pmv60n6Nu@yNWkoqr}JU?Bv)v$y@22_9RB84G1diyWatSF!x+mKA=;DHYlWi_s{4po!l9cJf9LwcVFW->|*QrBI$6P zN3eHVOIy(J#KEi6y*;pL$&1O28SiYN0b1)2VnXXo-v3#>e;i}_`6q+dWBClR66V!W zQi;x@n>D|F2BokylyzH+|4T&E{?|?6HVJuzftfW?^2cQN3j^sy-GUZ1-FmuztIuy=#ASK_q0aV7zf8sVz7xbJ*li z>`2(YD<`@dKKJHk_&Fwo`XyEd!_jRSeQb>X7krbGeA?YRxJ)C#ZlTQNP6m^RyJ#?g z5n|T}Ks$8|#4pNQ%r*=u$=jK%O3PzMx;=p_;toLnt3p4El1iJ(Z_Bao3fs43TR(-+ z#O>}Aun!H+bE@*JzXAdKd*Sxr;I9U^zv}Da#>w<_ICfX=*$cA}mB_OW_lMG{#$=a| z$%%fG54pXZA=#3S{)7JT2CjFl#u6+4_)dlKC&NP5G!RXSJYI(LPf zizv|g(~Uh=bOR^`-=GrvrrgL$RJ)I`Mr1&jRtWf?A8f1vqqkz=ZY#_De3Z^9za2t>VP5DEJ}w$ERu? zVh@RoT2??>agRMV1Z9oDNzY$r@IiIou*pcsJNR*Lt%QJ218G{i($}w4^y!14Zx(bF z(8)W&^eFrKfcY%P(WOo9k1^huiltFck(QosMvQveK zT9T<}bWKF%l6OI=95b!;0CqBVuZA>K>su9Wz3d7xK)V2j9UI{H0{DvnHv6OZs1p8D06!7H?~V=d3jy3B zfF&B$6!SeOd zz4&(2mYd@a{&=n5pU53ii@O1W0qXZ0yYYs6mkD6Tu>lPE&J@7cj}2hR_xUA85`~Yd-cYWKZ)QIF0zZyKR!de$ zW=M}S^ux7FGQ;p6%yU!uXS9FeSRTKXnA&T9R=TEpOQQ^7oJ$zNMJXFh2gc!!X+bn;FQ&7rgdDdt=|^GRm7=a8bRmc<-Re zC6JxTxYbB^qwjfh$|21u%qUgSKM$nwouC9Q265(Z%4p&gp9V((7&0#sfWk9-qqJ%I3zeX&Ff2t-nKLa#oKlWMH}otw z$QdK(R^YA1NFGlzb;t!K5R_L+erBBM0cA(7b8$TNl`RzOIwF&I6)KXKX2>6EgkHI^ zliA;jJ^9ZGKPu|b+0tq zLKrQryPZIcZB_TH)d45Fkeb`79-OPUws`z0wU2+ro%lX`Rf2n%D%;}sYsl(jV%}33 z&4)8^f63`PvydND6Gb853(9%0?jJ(0BF2hvStxp$=Y=eT$&T|{=?0F|XFA#U)vrn9 zXIR&?i^F z9I0oV(V_aL1t&#LG3Ccv2yf%9oa7E+BwWbOAlVE!^Tk`4dFQjtYznvpZN*nPvcaLpB&29_<4+9x;O_%Nhu9> z_osg#B0!D3t$x?DIrsv{b=S-DxU@{K*mzIT*ZaM%=xzJFuL8E+(hZ5b zU*e=X7_(5A}v8qrxd!jo{1&dmQp~nSuM~#O`$nTE)&FH#u{5+C-JlQq~ z)#R-drcV6!;9M6f*VW3Ut1AU?&0v6`0ytj)I%_-F{vdl(zpf%FmS@Ff|5rDR(J!Y# z9_6=mSLqrYUqioQe<%x0&EA6LrTo*VoVfGswNmQbD`lPGA#F0^kdGBNeX+-9SF;v0 zjxHhhC3qK(M%i}6S*jf(cc~nP%TEU62N&rz=pv9l6US`1%OY3 zDdC;L0FzZhh5-Hnz@Yhrb|cOsx|SQea&3-gQwarjUX7W*v}xra_%!{oWWz$T;Z%}! z3dPK@Ye$xEBeBeSjId2R;~VS?>{>xp+1HP8$3ivviiG%=SD5 z7_ZFW3XPEMUN}-t53F0Tn*x6Wwp)8F-pr5KW5=hv19?l8UiE$T+E*9h={T)0T{G`UN%YsnrO&J|72!aJUX z2m+sG;Ux*aB$5~ipA1Xf5y~*AuA1dN| zoDi_z#RnnG#Z#eRMwim|j7EEe5rhttG}|Hi>yoWfj@P8u_V= zVA9EdIGEp9{-(Wl;l5Z)p^+$L(Vfbbgw87wMauWoeyC!+b6Vs3=uqa&5INK2XznLQ zS#hgAK#s7jm?BuxQbV2Dg=(UGu$XH!x3bqCl#T)vK^&2p||&#LxH?qlRxgrl{l;1zE_g_ScU&s zg>y@q{IflE7hKE~9$7I^+WQE_K?s(~cdu1G9!w2=?eYBSwB0&Ja{Fv&a<+q2Uz_1X z1MuAFyjY6E_LyDDT!jLI(EfT*^mDlEA~M9I)Te{Rd*jsUrM;>{5$LPvmGSUErM(t; zflmvnbobv4b4xJcNvWlfJVGMhlFz@yuD|dRg|&imA3KLd{Cl?_$NcWE6K)NaubjUJ zJn(s&(-{4TK__O*vDf48akBOF7I>-BS38n_T4Z`F{AIt_p7eU{kLtD3VvHJZeSv@f z|HXfE;r}Q6b3wieTJ$v_-*3Rzj?sWyifF)_gQnL;qO+<8>{aHT+mTL9ZgBlcgvyGX z(pGJ@M!5dAWu#mnxqD3dV>Hj~SEz5w_ul?NaR0IZqoaJUHD>RkBZ};2joo9jnfLuV z*a;v6Qd{H#j>C~7Y@4Hm#6#3al28S&;*qYtC&!K&rA+nsRhMi^#Sn(}%Gk#R1W0fu zhZ5t%_IvHp&>EhgfiV|B-2M@JVs=mQzKULZawu{=&Xvw>x!OhVaL+Q5H&WT%CgzBo z!nO)$uXF0EN_vAhk=_*!EUZi&uiqDXDR1FL98YG4hYeR92+eQEW)n7OPbQ3B0R&L{ zW9-!XZ=S!!yJSdA3pQkzP%-um+B+t^&`mw>twJ^8zDdzy&?b+W-q47XqTh8cRG7>u z@NCUnCa5X>vC8zvyMBLEh7vV83t_Jh?lt{#Qd@O4Z9#qZd3L2UJ4~?OdlI3U>)rBZ zYxHWOE+7^Y&#GhS3U!tHc5PpGtc)xtYLw}YeDjeJ7INDKKr&sj%!jq3VSBd0ocaRA z?*=!TsV}$C{WB0$Z={OhjPg$NY%P{CK1ocGw7k~XmfuVcP0VA?%XKoWr&l*02-6i~ zSnYMM4_+7IVoCdSwy+lxz}2bSlA7E8J!0L&0z73-$R;vThCLy>cBsA1-Nl+F))Ml> zv&4*j9Qy<w944a^fs@uM6H9!UZxT)>FH%z*<_T;@5u<w6bmECwtxLoMhPeVWH_1VS_A11)w{Q`*Qp=z-lX4_2trClml`dCC}(8X}iQYX$u??-yS{p8Hbt5TyaEOWuEtw@BQTH zCwhY6g!KMm^5-mp2FwT3UeF|(-t#m!g^jp6+hCa|FeAu;5IIVGOzl0`gH*P=TPrm@ zBg~!Jh8`lON-^H(@YLAYUD-XxP1S>;Jw*tD;od^bWw64CMVZ83h|o!>?_&7(?t=H} z&EOc%_dK;i!}c%KIAGXr(;RUASG655pgmOI@85&yptL(EO%CuIUnro2=!H1FN6YNj z7_c7lbEB8~4ko;_+Urr~4RqwtqfZiCPl$5$?MHPd?SIOi%U z;dxvVyM1W0o0*x}{?RZ*VJNsx3c{EWX^9Cv<*RQ$vvkd(6@fZRT+d-1=9jcTg%M{A zYR~_^!#&`wf48MlOjVMHSRje1DxJ6{Otl;|TX0VE`ytlHiO?ySa`&Oax$O)FPFgp2 zg%Tr&I8(VA@s3SSb*Ld9Ey&Y92k;9AC_uWv$t)kTaJb>uyK%V+5%#})9mfS$)E>W# z;*d1bX87w1I{XR57#Q$8KHX|mx|8^EbI};cP9dqLf$}1~{~+x~d)sRgp(_}_X2Io@ zaj+Fxjtp3`iC@}A5Mye{*BJ3iAyZ`{8Z7T7P%8Ti=QUIno=X0l+S3{7=dte{IWA@K z;XbGKN8(*?~O}yH~0f1wqm}r>c0Y1>zE8+Lcr+kb>93)dAGM2XMdKQ3bjo6 z?62owL41w!gaGF1{Kz+T0{T>nC$PP8H;g%w`bwJL4`b5 z8Ui$kD}HZ|Dx=Byw?6GyklDT%r2-fRndR*UwI^k7M zYiLSCX7npQI;JJyqB>N*xu-o*eYjza4qNBQG_6!gS=D;R;94tG>si$51*EF}jBI2{ zZbxWQ2#>8}j-1pmrZ@Q(DIk+JTT|2xgNr&(MYW$rQTv#AzPP^kqv^&AT~SrmzLj8B zWHo$;O%p3#gbfahYL`dyB4^5dpR;PLKZ|4l_oT9&d5?UKv8uiZ@K`Ds{RES-DGEub za8_$5ZKSp21(Y|ws2t)rvu%^eUDg;Y3&uJzzA`YPp91+NGINv_PXKGb#!kkevzbyi zT2HPG23Mc7QFPKQV0-2f_bd}lfz21RZ!12XC8fQG5gOEFR7PDN0?X8ChF5!6`5x>3 zZvg}KM`qGMO4G?;88x+XFCyAt6L^(i4(}q_@SA5PjuhIR&D%pP#B<9JS`*(xG}tHE zSA^QG2-ADLZC9A>1kZ&021Sjcid>4%zTp!uCbU6XGXnDaKol|^!RGp3=uZHSVo9QS z?`E<~)Eu$jwReI>9w(ODwDAsl`OfG)XpMz7UMds*VNVJ<6MF1PVQ0eU_M~j*&Mwqj zXTpcUHcn+v%5^5V_M|*#!pHWcd~3<)qB__RA~3Os=frrK6;8BYOI(?A$sK#Fgw8k! z^VVnz0g-DnylHCiHTg|)kjCCeP>bRfu~h|XJ)2iuArSHoEM^zF`80;&^O++G>`Rcj zq6Zo(X?d}oIjnloo~?MHheaV-^E`jN4qEJa07H`22vSOxg?w&Y6sX50L^x6B6j}}9 zXy}^HL9EgZe*ZuaEDU&owMULCzxyFLRbgj|D^$ypK9U{l8Nzt3J&ot#_FnEi*rRE+ zwX!#e7L7Ffti0WdFHmLVH5|g6C{qLLx9A@dV-EW~&$$Qo#kBdrT1axWFs0)#L+kE7 zzBdrP!a2omFJ2j2naSm8^Dn}55PXL_m}`gGJ?ndd?xWqkSm9%>AuKg;=%cU|PkG#y z!CqHg#qoj2b3iXVzJ6EqGJ@dFX{^1tFQf66WGQmZy82z(atT;f>uAg=iLswI@5o@k z@eu8^bJ)Bjm`gXsvgxV#Ud}0*(?Xfk!nn^SMrSdTTUV}V?#WQS-hGzN1^qagv$a^6>x@#TW!#*xV7Y_-Wc7VEWY|4#RZA5?#}2E_@!tbGzu1=r=dg{RXH9{RIK zo7>`rDoX#c%b`u8Nvy;^ye01=Eu6% zK)iWpsJ$ze3=LaZzBl@jp-b@r;*qIfJAba{d6XM{%pmN=w)U32WoKAx(Xq@`TTAJQqQ%Ik^mpo`>UTwkp8w*R4Uz0jZ z;|(gMP05keP`W93lh@g~Hl024Kl*55##(OjZ1uJ}86y`&Y7Gqurs~Li6}i-DZ$W|q zJr>dAayzms`CA>=AS2%c$xdb(szx_9r!B;MwS~?Q!*2GfIv=w3MvRMUz0IMQ*-^s+F&@#KYrL>7%{~E?;gm3IwE-zF7b+~Q;?}^6>b$|98 zU_bqXy^UYagwoBo@J-t%T>-PDvZO=5xCO4`m(O<>NH!iRZCZ3d>k@0ROw`uX?-Gm= z6+iMF#YQ$fSD=-=U!G#BhS<1?*D(J**c^O|{wrXOe9h|e6-;CW&ct|)HF2GW0bWx~ zF*XU&73IrKbrf89_rG-Rrm#9{XJz({&aA3!skxnNHYKgte8%#YP9p0~u%53fobX(> zLKu$sfr+U%ep?xTC!{jAbod-4QW=g~)S^dUBVaBmphF9xj~a>CoLJnmiNiJ&rTqUMujgSszmI_}U*UOl(qcVrS?14(@9KYhFqH|7mT(% zW`5}UzEsdtDnEAoLD5N*I+q$?G_mThXH4N;q8`YIeBJb7=WgK$_@?CTU)sFfD>i>+ zD(uO(Erj~hM)gJzK_P&7pl5l{!VBO$`RkcJeb97>+PnG5x7E;1Rq-0~b*w30y>-pj z=4dBJ#!EWZcD~lJz4NtgsVy7l&*PwdC082!7o$J*BQf39?d+e6FaJmG^TcRAS{0Y2 zjteDkW$e?3j!q7{^4|@Q#+ABTY z(Y{ua~hA{@8x^w=>3C%TL!}S@wcI!3Y`cG;1GiZsz5GX1dP162%Zey+b(s7z1bZA`DWg>fK^Y#q;wahbBfIVqB zI=5$KaXSHYCM{1)echhAEOT5oMv})3kTzA${G->luxx5hRah&M-gdy9smo#?XKRA2 z6kgR`3eaipaF1mP>7a&)GSTZH@ab*$!LR58k6!3hH}Oe4?NqmjMDFIf;QE7qczO={ z3RrnKq@Fh8Io4AdS>sf9B<@-5ocR>EA*{1iRi&z;1gH9S55?*x%$n()hfUP>lm1y%xOHR(~6%fC8)Y1^8`bhsmqV9lf56+J6t$9Qr@Tl-c9vfbp+Tz|pelN?d?T?F<+4p_AbW_SQ>l>V4&Q#((kC{G8jGCFK_?zkt_LzOe ztz<8|py?zfp^F;moQbpKBJ5^!uAmpSr_dLNo;+Sz0Jm6drGHoTEBH>F1aQR|JM45;caf!}S%TVv;R#?^v$nv2$kAJh=5xZ$xpztlr#T znD>3bBZ4v*1uXgmSLy4&&d-#)u2&Sy2b3dLtEEH&J%WC0C zZF}MoK0NU{Z$t@&U~0`1_mgH?X;<%gT=m%1|L7h5Ac%nsKvj&v-r-Mr@4drk@E{ST zl1&pHGhf2)mEXr!mi{kIzkCWP`r5}7Fa6Foo`5fru#$wdcDJcZORJS zD|_Fi`?Kk0q^8b!_pT$ld3|s6y}t6|9%!2UUz~3}7mS?83#pRAPDuQqNBenfFGDZ2 zK#O>a6Jgwm-!rr7%E)MsGQyeA3)Px6J=`A`>h_uDFT&1{#%q}{vDI_bpz>c~boHhh z2kAf10~XFT$Y>)Kd@wT3{(Oxu&--_JjH~oV8_G?)% z${i;s^V$mQ`CErr&yUXKkW*Dg9zj(%5N{y6ymS80%<tLI&qhIYzK>dy5?mgk>OjGVrH%7lM7 zY2amf!pm|Fr16}529l=L`}id;9_U`z?4Avo{8F)<@AC)vt8`YtcQ5Mi0cen?cx7Q5 znebh|AHM08mo#*6o~Z*%_LAl9AVDjn-N_zEE4OKhwELpRr(T5rM2{7i^wANbLvbXa zm0Z1yKiZwy)G_n=MQqFh-h=bVQsF})2d_-kM!$Z%%1FV1`lI9#LN_rZ=w9aW>GyQ2 z-}~F@4o-@WwU*Wd&GY0a2a9Sl%=5J91w3b(=P}ygstK9rYomlUsL3Ke!S-!+2c|?W zitQ|^J2>q25qR8qHRwPoT>ML#Inm4~4c@qaLU{PN`dS?n~u7CqibrP2-Edl>_qSm^$gpbI_x-N`63E0#Hp<-6y9)p~hr?9;QO z7ZZs*{Gy0#-B-`w^4-?G_wWl#yrp5eVP764>-7H_lP z!I$Vj`!2h){rzE|q3LELo5E}`x3=#lt&49v?f2|`!`i^&Gq}F3`$qgo-@WxbjOt+^ z{$9T7wov)Ik<;y-(hbS!bY7!rLQ>I`)BP_*xU5c?K*KaW6jD$$VXFy_CptUc`Q4ff z!7X4ls6Dv!Chbox6NQz^H)8o*Wxr*wjGl-i*7^3n()}V-DqOzr_RCCoZMmg(*!#2@ z(%pe`ZTH4B-C))M#AWNn5V_UvFeS8FFK-k<$CNkU9xC5=+h0oe8%LDXpXM}j>?%o7 z_NUz&>t&TO`$?8Pj|O&k#@YkjtPi?3C1vTyg>dKk{LA^0sc+9w?G+@9T~L@vgMk?i~>O%mIWxiP0P`-EXdL@#yO% zFe;OW;p|3_{xXjE|C#<6@b2kDi$0!+lJ3kllBSZUXxRPDcOdyDt>;}DFei3NVA+j~ z5UZ*~4*&AEm=n7!uxx=z+mm=`D*}RMh3tpk=1H@Kj2=dOus|3-ml5QcPi9pTxmo^i za-3l5Gj!380-5fnJVRHumNlO}0UD1#V^&30Tx`I{>@O7r^&8IFj#h|QabGRt@0A*t zBhye-tS2k_t+X0u=b9L-YJoe0B0W@+^XaEo)P&?EV$s_JF9{-fIxp@?fKl)%)ajn@ zJ+m7ZaEpb}+cZZ*R;Y%+!Z))F=bPIxLz}bDoeQwJpGn@GSTEsgd7f9<=IW|^_XWTb zRe=lyjQb6qX|3JrJ~1HmY@V&9lLGNIkvrJ@-5`0pA~?s+z8>d?;Q_myYbAFFH<+7f z5p*1ZiA)uo2Q-6ozo#0QPl6k$IKOlaS!JS-eZ#3s^75Rte6f}NZ@-V+x3z! z$v>0E)wjRo-zy#iv9c$?XHDndf4;5DUNMKTCe?Em9SmTwc!<`Tkrm+QwWB?A;z0S@@sIYTnVdv+Vc?m`lo>AY_*%TSlxn@fq+aH~s&4w^rI_8`M zxh{n;;jKwrp4DFVD>`?t?DIEfa?k}fxA1R4UpBkBv&k>PULlgR=!NDm2e-J#Ponjm z?zWxQ&sSPiD|KC4EVa{b65GbdFX3IRxm;ngTJPO%eaf42^D>2B~GQ^oWk4 zz?(kxlbYt%h=xANU-5IqTIR}yoAxX^5TL@y1N;iVc(YJ}74$5l4e5HWpMty@h!keb z8CHC&5L+W;w&WHniAU_l?tRFzbbvHr$iI?1hjcGw}{<)CFPe{WwHVO5Q}HJp_Ev-KoXCJm_nkS|$;Or0I2+Qi9!~xVVoo8qLOf=Weqz z^|L0mm7VoI4gfKcAToSlN@OUPfZvaN7>Gaio1>^4Ib~p`Xc$|IIUd)Ky;VPfJfzp7 z4bzC^uheON2mb1);!LO2*V5W!H)|Wj@|v{@8`l?_RitJ~kZkGj8dYM&U#Bpda?U_J zBl-PMkuN3hN>g{}mX1c#6InOVoyjk2!s|n10QZci@?&w&A|ak0ScZEJDE=3TABgM`P4==c;C-AGm$q)WxwEq?If9pCHG1-~GBaeR zXebRFGVvKIp{wK4St83ui2|2q#5XvUVTTPSi{(z;g{Qg&u7PzRVBysUd258t~B$4c0a^>&%7 zkh4{rkp29Q)v$R8q9qGd+(3Nl-&fOiCx`OE$H%H4ZJ@SvCig<2Myvh;Dj?TEb6JX^ zq$drp{kC{Pf@1I_B>BfABpEbVHu^I0|0o~4ko<{ypugGmQ$1wvRJDEop&MZQE@RTo zVe%a%E?~eJwdn@<09}XV63yA}Nw}OaF%R4g(tg-T0OX!^R6bMOp#1AkJ4Sw076|OQ z{DBpp70r5J!{wd3HZg^DHf=uVmeXiwQ|I>0XD;ArTUXtO)sZX+bwHErUSXm23~Lz( zQ80jIf}KQ42V}RmLw#o`HDXK0CI|x89rn9te@ifWb{gWYlQl=8n#-O+=JoLQ-smTE zEAQ@W97Em`D)eS;0rip2JRFVxmaLM~Q*%ul{=TiNv+0+&p4suf*Niege4!b4Zr{?m zrE_JYmjhX}w7TG{>MpvbCMSA>2$X?t6eL9uigJhNG%6P(MJC>pGyYR zpqI}u%+TqYB^nMCKX10G*2gzQBiI!d_?kg5QcHNj_k$=2s8ri%ozw*`9+VhruHV$T z-D=QrIOugK7%9Zfx)TjR^G)X(yJLM%<5R(o)sc+NYu5Kf{{bpSTJ`g z0W`)sbo*I_bM2E8Q#cfiZwHId8*u|Ms{y*HOy+g8Y?5!_Hy5xnt;+Z{+vsk*K*9qq z+22wbIZq|S?OwIZR=$c!^k?4sQ(sVKFgmbixPMNgK}CtMD9&i-^ezkp&cCb@X+4Lo zFyo^L>(TyImC>+sT|xPEg|#_#e=mrh>YVOOC};>BPolh8`KyzEjT~t)zP0%vA99yo zMZ46RK|mfR{{6)4ZofO(eogz^EN&9`l^}0N@@$rFAZ6}}d1n*_jlp`gAdB7YYxb~h z$Zw*K&&7M#)gBYB9kPE+Rw#0()~s|3M<;7*h)R;5kuHwJd~U-&;w|q&?!6QV(1=7N zD`0Rddp^mL%bXvE@RmEF zm8tH0Xqg@RdqL@bqS0I!`(WF!R73v7GC?27GBS#k_l z2_saLN=YsAxS)GgCDe^r`dHBS@#g}u+fqOE_tV556?XMHySfYN*;C)Pr+$bjrg}3+ z^Ve8cHnRtsxaHLSt8ya8&xzfY&-&$E_}OEUNv+(qp-t_*sovh=mi^6jRFe}q$%(#= zp`>91f5abw=#C*ZMp$US2M6;1sx z)>P6k1mG`#$>M?m;Yli2!L$I}BbS!nvpMor`Z*_ZrolLJirq7!dh?^rJI@N@5}H}O zPBxNoqkSZK2NX@zX0(nCj^yno-WUn?0q3605WtCUwkLIQ@cqjiFCiDV%Rk$`k%~e~`l?Jfe!W|U$R9$4EsCG-RHE@1;_ig9Fl-4Ul7+DIh z&H0Z{2IS~x(4QV%RN69xE)pqD7dRsICwtF})22?H+PxD$^PaPdR|MZpo(yyQ?R~1! ziFQRAfQKzx0|h2Vq*;{XD#$vCUbX5+h=%>`v6hTi0yty8ArgLNZ^?kK3qKaujR_^c z3Q(g{z0R5Xwr{TVIy1Qv#gWS=v`P*(sheNSfJmOTaza_`6UL84+w>hx|8Up5aUwsSXQ92Qxcsp^083?Ycfq-Mo z@ztB{AHWn>i7HDcb=Y08?F9{!HmA;P7|*W%qz{QN)*oclsy=8R7`8W(k4t}3@XH$$ z6H4k1l;8e#Y{kXLP2Jp3)0=u7dv`VE9n#>t2WN9@iPnqGq^{!T-~st8Dac}?B251B z9??1a*(Ku2tt5;8yUMHIww5fTrHoFZ8B}u&)4nBaEzvSBc2CE@M@}GZe`QwKst>EE zvAuTnhay0Y;Z~Vi*cBHfcc=8jvL~VtGsC>hp~xN7$|ghfLzu;$-DMwg?(zL2vCLYp zWODagChhH>(c60-yA@Rm3?VThj#0LLLTccginaGO53&`0CV5Xl9ib!Z7}NfwwgnMs0&cd}BCp5W@=U-pk!SHu?N9JbR>3P3H;!stonxa&_wnhAeYV${(7Su-E!c+K|C58h69 zBEszgvbsS&9i6s|i``P~e&O!6(Xb%128x*EK6^?Wf1=7zqWXOa{a(tUUvjMHr@lXj zW7-5DNLJBZ*7K8dQ~P{*!1=-VrrB?5*QtI#N?-}G*R3U049W60twb+n7VkyqGI|>J zsRAMiueK69l-|rXlz>0t1+S|mw~&d@W{eq9ALt;Jc$2kfDG<=#G=TV|3=uA2LtbEP z_%f+Fd3AxtjneSM+Q#!!l~(l7qZDX5F(&_IiDO!wE&bVA zdg`(gD#k`M#87z!g8z8}^lKJ~;|UZnlU|26>8-c-bno)zcp`KyXNX=!P0O}BjV;RE zM!wXad==#d2&Ws1mT-YWuL`l^XY=IE_wigF6Js+B;|dopZQ-wB-`GK}SN{i`B>{9I zaQ13u*QQ|Vc;vl=_9WT?ZHUn;LYw$n=?U&I2gC+UR||KDmb&Tz0CvIy?q&dz@AR`R z>1w{)Vltwz)_xoNsM){eX29&oS*dG|NumcmcwfEDUf8!42JOwfY{e%~OHxCP#)qT7 z#|Z&?N8Sh$*CIPz?Iem};#=@Z>Mx$WP@9_>f3%Ob&1p=^Tmm zfj2~vtXP&`#^BMHURV8yTrTw@xqE%*we$Q-}dbXc;O$aoJy@tZiTB@ z4r-~G!^*5^)7|C-LJ0yQkN1)MYUi8^MgbDySB53|99Qt0ZLTqLf4mnIIL3q3yN<4E zjf}*1hqb1S8O=y%_JYoZ_hKzo_%^hS$wssXmPtEE#poXow$r_c4%D{MA*7xMYWl|) zrj-U^tKk=9`@g|hYg@Nt&mfH3A~X9j&L6DS_3L|2sF_!V6aT@mv~OcQMHjhO8)PfZ z+Qgd%((O|tlhVDDkXtG?)XpOZPvY4@dnQ1rWn`rg=0 z*}>FWPd*HyZwDWXB~FqxP}=ZIAGtrEzf!+#G&2JC)bl;Kj^(a*C>g<#p0E85kXhuG z&L&1ckui*ci^n}cYtI6vUi~sKT}f?r=Jq{ z2Ad!cXLDGc#15Wl-4`RLlu|s30msXujQb*V&J`<)v;@AfT!#W#|Q$5kA?G$^(;Y&EB z2w%beMB~?1t#cP%hCJkPVx81S5IL=|#R!e~h@#9SvNPzXuyxJ)bBx6437*C&w2UDv zXC&AB<&1>gdV;;iAEJ;~#COY#h-^dVA;3IwNHn(f(H+*S`^!yz5^)rrSKQN01=94a z`VO+DO%+61R@=Psl;*R--Gdm=tlT7v_VcgKiq9v9M?Zg_`v=$lChsJ5(N!V(ERdWC zuP}dFPj&}``|Eq}*#E+bB$w`jq`~6#>py`O*_<$Vm2L?@fw1-4!=?M%ckFNGzJgDz z>LUai3!gL(^SS=<%*5ItCkN}v!@-~^8Rl%1zGS~(nSx<}aPfMIG)t1$cHMhmRUb|c z1rfs%Fo@kVY>yRR2b!!s8g8Jt7sW9`(q0$b&ol?7dy}s)FZuM)Y2En*NyBAy!Cd-Z zogZs1NuHqQ!Pd+Hx#hTk%s*v+HM4FGkR%b%rq(j_L17CgCI?$HFNpO9=4Wv(`}VxV zj9yUzd+#SC@-}}D>GM-M0+?*1Zsvioxv&U-M$dZWk-c8Q?@cGt0;^sp`t<>2Op021 zYX0HJ>beki=&pj;>KX2L%)6HKBajXmk#ju5kvG26nMQd)X`WcPLmUj*a_1MOuC$&X zlRt;(Q!v1}ksM$9!US`!JDY6fha+DjGJ^F=HI9oHL}tf&Mn>L1tJ{uAqcOETUBd=m z;rKocMz#PS#~Sx<`lxxmGk9AV7Sa%S)IA#}jJ3@2Y(+kQcDTcsxl%uV#Be_t@aYzkX$$NQ12BkJE z%YeU<|Hdr0Xh#68NBk05ms-{DUqbXM6G2XQa^5fW9{nbx=*hx5o&z_KLz_u|0~wYO z72qM)oJ#%Db{#K{14dF6?dYAuNE*+}MCIlCD8AS6I0t-dNT0&9(iOX)!F!zHUO|1h z{pDD%fZ@&2rL;H&Q~Z=Nzm4VIKUN zykpZskLuFs=J4HAYc0JhnDDfjT%29X6W{5wUTLm7bY0@+ptZOx3$9+eskiVKuhZQ0 zdiLtzi$+H5robFYJe+3Q@FVL-q~3Io#~(1!6#phT?--VDB0JAJ+L7$a_6p{WQLw@dJ1OK4d_(`Iq9^$+E{B{}dcu_jj zD}RR6$uoHEr+3|fc|?e%Gtw0IJ0N*4rCCb{bqLcCvG7Uv@u#vf(0|aQ@9Ki5LSi>7 z{zH0h(|Mu*JM2ECv)!9nE+>Bv=l-*7-#ccu>FC_%Bq;k6pi_5XE>|D>_#!w0X?!>Q z4<&2=p9GkaM|dSel`cBt=&Ia@wxs{sum( zl%6P2yS-6XguK)((<5!P&2uGjn-PMIG3XjH{iB|w5L1JXPCa8OU!^#G=X~kcFx}!{f`-%+o|O5$at*rBm6FB zY<;mke^YyIAsaT{_#^aj>|n^~8-yHD4<<3a4zm`|;~9whIY1Z&qC;|J(opaLJv+mA zYgo=$NMzfIs`2ZTXcGm(^v!=#fnmeD08m{tc zv7cN`@|;HCN0|@Ih5m<;9{ibNjY>Z)k2KRBweJJ!@zVpOGvSW1Q|`SVK!Sh63X6)R z@Eh@&Fkbfxx~JEwe?;x`WT0APsL#G!&}z{9>=owIpB~FqOOj7gR%1F-9#VYSuaS+E zT-BkK(|KQqNSX*%V6gcCl_OJq`MpC%T5tYg=2RRatn}-X572d{t$kG{E2%@Z`-JSP zyNGnOzI+4DbjgPzA>}@XiI4^t@v+~AXhMsG;PG>9r1}f^l^{e|L)0FpBkJeQVRa)L z!$hBGuL-@IGkD7|^-_2a-4$REJ#&mtLZ43$@rj^ah&Nd#z{e*|tSOwHT}Eht$WdiV zLq^}%zPV>T_EE<0C@Ze@+Y4wJo?uq>P(*cg9Y4?+)9Z=Rsz zijqsI!+I5h`;&)g@0q4}>Mx5Vd$#gw8JGr9}|+q;h*K0g3LLvz_VbPy`n``Z|wZ!lB$ zJ4^87?H}I_nvVfS=a`>7%ywOG*+ca+R0qQs{|jTXx3GTv2b|{gI*PbVC9xv~wI>=S zK1c{bVoELSwsQ;Ji#eA}Q5y92Dz*xmd$JN0i^->y#H3vI!>|>4>oNA0bft88n?2$4 z+jN&wUh!I1)hYkJSLwAcLs*o)(Y;Q^A`TROY`t9dP>wy7iy*TY3q`R#XBUfbgl|5p z*i`%=)gWD}3g=n%KPNN6su8R8PYEBO<_f)dp3lLO4alc%A>S40d>`iZ=lf@Q5V^`zmd^9cfIJD17XrdJOb;@snW=_q zks&8uIhN#OZ0WU(ICvEPgKzg-4*f<#+kAUHPEvWL%^l~=qV(eRi;~}f4)tp`pKt^3 zo3rNfcN0ZzKH(Ogwl>%1kZXpQvcRNt-d%XThQ#%M!y9`dmsQWhb!G|?Naht@FJD?~ z@lrHgR%*@7+j9vOrf@}tr$EB-BB5}Yuj`2mw}jpZe2B*r==d&(_l<{Gv3Z4sK|up7 zX{pgrre{Krv7e2($!e&S3QZB35>MkfI1wWhp;iE`6ey8Ye$5Z_s>~<;Tb8xt9lib0 zeB-#JpPq@ICov+dCEt=R=;aJiQkBrP;w=M9s2?fqkeV~^FMN{ER62!?c?_Sllf9nf zDdE70)_<+|@(O!3Y4Z^Kpj_kr`4rO_3Hu6qU27T)w_4w$|3nJRa?ZMv=hz2flXSu| zG0q55^eX4hW)PvXM;%{99JKnsdT&}o&I3?Rv3SZvj>A8l9(WcLPG=L)BRiTqvL2-0 z#2Sm{73K#5l?2kT;^oQ@(w$9|P@@unuF{t-oFh839wX1@QE&9{qYkGdD$-S1xQAYE zx8p42`H0Tie51P1=YtvI1Im(H)eM{|#5!AX;A_ah6K}D`d1rIS`3)-91l_R~-wM^p zFi(5Q&E%TLMhCR-%(@>SuFv)6>!Wjt)<@;~iE^#!T)TMv%%qP>9nc&Xkl|BbRXby`KPQfEQTFZ+IjVexLn~@%R6*_a0zX9o^sP-e;F{;PhSq zJt`_hM6si&8`$=S1!FV`qJWSf5I9&83koVnf*O+;W8Nf|R81^t8jVqGSQC}ldx?S= zdj~!DH~Sn)^5%X2-~I0M-0wcm&Cy}co;_vFnl)=?)~s36i45r8eh;BmFpOBbTjQOu z477!x&+8_Oe~EiS=nRvkAb}djQQCv#SUZWR7>p6mS6>t<^>ML@x1L~|gnNaeyVIo= zv4~h&AW<^OfO`gN>G}{|LAz*cMH37&#D1vMg(`gaePg9ZC>GPSd4=FFAawFdXtl^o z%OF`ou!L-f5pu2&kj;s$e@8$FZMqnZ2D*c>zKvSucG#~xRU$34Y zAweR|`xfN_BT^rDF*vx(2$Oa`QGN$v!p^W~2vYzZ&i{pUwE_uBN&8S+@DmBa+yj}+ zdI0)8uC4<@DmeclLfywBATJ^#KWQ>>PATUoN!}6W#2d~#?xG@4nvDz+ZcNOw5DS?W zgkT;>SPo1(&QfEUL{>z@@U22iKESdnnUUv!UqS*zz;{1x;ljjaC>wgaxF;c!^vFZn z;%r2y<1I;bZ=AMZINqS&Lv}5FQKV$k3@A1XB5i*NDZ;dG5*ausO2CY{69xjpiDBW?U;)4ac8z-@YjW*r0XgCa^#`)f z!z_+1?+faMXqIR-xl7Bhqn;R3kkD2>+A879CfRlsLT_njT}O-h04ZOHm;kOncBc^; z0|YW7SbRbNLr6`fAm*IsO}B;)d5Py%wBSL96- z>?5#><>({c^;Jz7$VDW%X$$6J!Himrh&b#WKJ(CH$XC*ucn%{oG(5wkruBlKn(hqi4&?u3xkV-5@ z(2C{Vi8Zvdcmeh#YOlD8MMZr~dAQblihNwzC%7YEz zf<+*2?GL>@?(NW@D~|QJu3<7*NYntN*@6=^k?`v|=*lJMp0{YD7lFVHkEWdU(Yz-dPj6P#DZHlP`z7 z_qAaWCQXY#S?QQc-TiNc>?<7VIeQJINJq0?-;n!*cMvD_sy7)z?Wl_TXm>Ok?2*oL zfF5ebb%901$O37~qMb*CL1+h9cqY9R)fNa}sHgx=Bw-h3GK7suff-ndBf~IF4R)m2 zwA4>3RzsKuLw+!;Oho@=wLkzv>~`P=WF12wtmyA0MTs9ek*#;IuVvW`xEaAdX^qn= zX@*-<6d@{KOL*~kVlR;dzF4VDS#W$WP$*%~yWXkg&t%q3nusv@vlXB*FKtQ4-@cHUfNl=$%qT0M?{L8htvKL z`^;Sy)w+17$8{I=jH{un9IV{E?StsS;LaEq;FCs(3K@}7tt87$uOOk){uJTWz!tip``=k?`2cXz$cKN^skP!GU^}cl zjIdfVBdBG*PcR2X`C;y(XaU3_-PtBFT@2`Ia7!q7x&cN=B#4DTgeZg7DzW8D`o&JXc=6D{ z*QPpTLrhcUz2Rw1*v5T8T3g&$6i0Y*#MTxsdifn;SFIw4IRamKhaX)NGp z11Ur+0ym^DRd`5gQU5m2Dc?=x8DvD3)*Hj7``3)g)5%0Gtl}PMGFK&$InH+yLy9$k zNvF1?IP=i5g!*gHuAM&+@c;yEm!u}J;}Mph1nR2j;0>1=2;iX+4+5@=WB3DG&qj2 zo{};ZzM7!Yj8_aFXf$bxO7xELLE$m4mCVsN!QXV=MZ@V0QS__ z?}EA%xjhQxUn~X(NMjV)kXZH;a?q}SP}B*Q;KE; z`d2tBgAC(*DNzq8w<5yWh80QIgYE$sIMp~AL@^@b0SvJ8#eLH^-8(Cd^mcj|_zUIg zoxf9tiOz@#Es-p+reN**9u$Ft@P&2g2~QQ?wh0(H!Mg*5u-~mB17Iw z36dc9j2Z>$tuJsyu`9R*Fw`G?qY7tztdjheF3p?5K1aE_;)06EDJZ^$R6JCHNWHb| z8E}26^tRs8f33_zwmwVM$mh6pe=h9TNEf(E_V@^fp)9W|%9XZ}Bwc4ofLqWC{kn)R z#cT*o*yA2m_1E#T3xWU!ss4|3~m#4yokIMJS0NSh`NkTQUHaAgTnh0ZIy6o-_1*yJ{q6( zU}GGNI%#_x^-{VCBM@nIvH{f_Pr{)@(h%j%0Yv_e)*!F#-u;ID_>_*UlZw)VM}sj# z611Velo!I0B;DH=B+)~Nw@_(mpe;BJOcZIrBnuA1H|r1AYeb^6i{J;@MVxZqK$c0B z`l108y&X5E(@;ZYj#YYaH&;)fCKZPuyWtK_7bfGHA}xAkNhCQNs+~Z3a0uWc zDuoKEa4&Y!F^G^t%QfD@_SR(%pRaRxggiH{O6DSBKC4DXtm$A4XU2wP%D^iyZ3nuLk zFL*GwE;v=_$i0QbkTSO=U%C&;TTvfB1kkK^XS{bcZn}V#r{1hPPMX+MtOXo(^pga- z8C?{Ip4H`fop!!-fKUWQxq?UMZ^cC+sCp;t8A(gN)+Ogc__C3jvO5QQigdP{pbF%L8BF)2b z)ePbqhXn_N1|jamUkpKr2T?o({MgnCzzraH>hLt>?_$wn&YEnq@0}|ICKF`uy=3yC#t(*|(4_A$8KJ zTDvEau9yTshzM=88!ht(xEdH);U@r!DCiaUpwVB#K%Y7w&Z|%7g`=HM-n9#Sl!C$P zfz=U*LwDOxwg80%Kxr<2CtC}CS^g!QPC~VDq^&wy=D2}N{ z4T6iZNezPBC;yk>Z-*`+^*f1bYwT+d!ysD}Gz`>_j;aN_TtWQqJ24rR=HBrCpE_*7Pff#Wu$=Z(tN~L{;scp zZ~wgjljopBz-}p}l=q(P5r?JZ-mpFOIw0~J?%st?q$@Ii(Hh3Kp2%FiQCzmf%Wuu$ zNFb{Cd{Gdwpb6pZRs;}Z+{8%N@p}HO7h#G^y&M&n(vT6Yn4M6}?j#8$BoLFMb=FIL z?fXdPE!Y(f&63=pqM*gzVhCbjDBKIwbrv686$H3dzHzLsl*+{fQNI2w?PvMGCI;VW zf-#9l1QC0oe+xg_3}9h~g=}zNF|nYI6oJHO8WEP|Kl7X3swnXLJc5Z+xcr>S?@F*D zbF)%dZjYK=%|2VPm2JKEj@&N0TFh>SOqar~aV6&&V4*w!>nC*e?XHBHTyj|V8w%GZ z-~G7m<500jidrk?ML{D#0e_RB`{aykd7z1sCk(x9#uFznHgQQYyL|A0w(oI|~!Z|egAhKot%+=1SQ(Pj5qj0HZ3r(z-|=svdlr>fRR zT+MtkVvmHqFmyrzOrUp>pmRShdD;+MfZPNi6ptY6nhX#+uM&f)h%G|j$6eaD9wtF! z?hgG(e+`!)u|;6o?qj&gC2;y_+)#zIeotIM;5~s|;uKSf#RCC>m}<^6k#$In4tL}D z4&HcgiO`W?pq%WtNGR`&g)7O2z*M_*B>~`C&;uZo2ey0(q_$ERQcCA%FcYa<2y8AV z^Z~j63J7tQACd-7oS-F~R3L}jD0iGGpV&P?#2S1^*yt~f6_^+lO@v0cF7oVD+{g?o ztJ}TP=wh}(mtJIyX@_g$aWw+tU211Z1t1vul2ynZY^+_eK*rdRVpU-z*+PrT(Yp8g zX3MzKY}>@U#l1*`*2R)daA$E3Q*q$pNHVn`QuMGK7gmE3I}R>N#U*Mu5=q7*Y>a@J z)~r~hA;Wk7h`SVHMUmEB{xAi%5YZ+2GVHb6j2KHI4r99S1m*&Z0WLP(+}eqUfH)gD z#fd`5vXg~qJZ$2dz)(BvIyDDVjw;F_3^?I3@DcDLyQU3+iFyP2x1j)UN{MsRP zCq!-M9-*t@y+HpxX}keF`{)Z3bZ}CPT#RuAE3F)cfTV3<_N zH6E&RMHY3Oh5N%@m?!P>0k#A*TEi~;3G*Z0@ zL>^a&4Dwtja^F}^CqFzDJ=`FPKi&Bof0Zp(7 zQZXE`{`I_`)H+dU!Z=XXFs$f_rFEVAZb=nKA1_WN`;Z~HpdfPRG&SiaUcH^2UcH^^ zs0Dxk@j&SYMc{CAoN1adVrwZolN5>m3>(#VicK>?wQ*7zgV4!M*v-QXBCt5B(EZqz z14?!}5gQZaF!zB_5NX7N+WTK1P$JVvBFYFXew{75M0`%ayKYBOR(08p$ek0y6lT_r=*)ql#e{xM{q&x@8s$#Cyc`)-8r;`4d^E#kKl(#iidTjO0LO@r@YMqk&S@Z5HBY|FO~QM z_MwVgbHHL;_ep)wTwzkAIIt40!~qmfXsO%)F(TIF&3sf2vM0ecvD~-3BQAJ!#kc4} zXidrfPyCNg#FB{IyX?Ro0vXZ-U2#}`QG9iAZnbvvHlh+%lK;rxt)1TOM+}~n`&ej6 z+07Zh5*;bhrz2o1zz0YUS2Xoe+0EkKW?1Px=8l5KQn0izfh+{~$sl45j~KD; zLJ5SbTzv@Dsy4Sk&Y>_N?8^y@m5Q=*a(~0E?ta^FQQ=u|Q+5Ie1ecXdDPW%V5vaFb z3EtQ!l|-!Ul3ctth-ndM%>>6f@?l_wrMpI>^Bwg;O zB+1zNX~_fo9Hs7S6HeA~H=-sv@fN`d?jL_dGG%80u@o{Rbq1s9sdIgwFWnIS z60BTT&hsJCHy;{`q_FIu17j}^oEv#EC#0yiiCE=vDJ#twUyJ-P6@XoQuwG|m*~D9; zwxh-O(7SQX1~?(^^PnPNcbEb(eAkQsP3B_&hIm1rWYJOnK3E(HgQhg)2CF9eTG*A| z3bCq^Y_4H&pN$|gQIqD!gur#>u`47tx!u*Ws6AP&ksO5Iz00?wup9?d;Y6_NYT{jg zc+Pv*FQps_9i2+<=OC9dNcMI}+F>Lu?vwDPC1AS_;~bC_Kdv@@J<^fZm!767m^@yv zz|(XGfFRFDzUM*T)8zXe=zHGsh3kCpHs4d>dpdp3%VrCq1r z{+Id1U%%HgeJ$Y+vg~Cna1Dkf+3CY`1h{gUWYIdPhuWT2fFYa ztmM6$lNbiP{08N*D@cYF-+*QyZ-K0wtRQqSZnQB8ZJhs@!+B6sao!austMlQ1)Wro zpuj^%)*@J55Snlinm`5XU*xs#YcjY<<&g?_$9J+)iUJC}_T;fkCk^0W`RM$RrV}wD z`hTt^vU0*e_ip#Khj&5E?t`Nu4ijN{WckDq+RcyhA2!S-au_x;Dp)(`GU*LB-M@sM zwU=V#^&Ub7OhADGiKXt2{s;bWuFjVFU5K%Wq56lgukf()1AHgtTpQ)yP0Eq@Pgw9K zC&~J8Xcfkv6Ylb|a#)yWgW)-kS0d6P3{>TZxi&G1{uoBlPmnlXbLbD-1tWmKbM)cw zkw;;q>qvGhtQy#Ca#I3};xNOwK`uo{8rZQ%`Wt=+N4f7v06;(DXznrh5qC)o@acfC z;L5#SP@Z^i2RZ}E7xcK0f5kP@M7EGciGBT_{0u@qdC zT#>X6R}_)&|NQ>Hhk^98G2_O*(lVlLcv5;gmC$!W!jR-~X*sUs?AY|goSftwfSj0~ zm6{knmTHugJho-Gw44MfAOUZgNy$kG)WozTSE{p{v$eBXGiPdY+PG8~d83jNU5U;{ zU7Z8t`}ZfGGIL#7xvrWJFD{@8L5`wPHBaIv^hF%;*EsS{=!&@dzu3&&^dx6SrpxIC z$0@<)Bt?f)DcOnRlL_DsnUa{6o}5IvQnQm2lbmT8X|A-y^t9I#U1^yazK@u_WMn$WCy&p}p6pD@ z%}&c0=akC(OLW9TBxh7tXGm^ZhO1M8>$y+~j|fe0wjf})>_+@KX|E?I)UR5tpWuLq zB8b>A53T^N5bjMlf)KJ_Ne-rvo$Nfg0=PmrqPIiINXq~GOGEj<5P48=wT*+ucO_&c zW}_v$qA3BOgs*H@0;!7hnw){QZ$wf`M3J7ElarpDlat_$OwzVa7?YbK;g^sAl|`y3 zQHIx7laV*7xBgOY1nZL%B%r*w2}e`;iuRUA5Ed>0@Sn;b589N99?)Yz!hk_ykA&#B zxE=#VFLWenZAA!>HP}zfl;|Zb69tc{AsC=9t7SI{C6m!)lM}KsbMVZ_9iNb%mXVy3 z0LpeoIT6Q8;w`&*djXZ}`<|9Th-^abo0MP9*u?bY?1bF#$q9*L$L5YFQILf%ctTAu zMWrWBPR<5czBVF|ARvLzxEF2-r+?qZEXBcsh#d6eNBL7q(2yE@T8mYmo-$BI%0!td z3uUEjl$~-=0aPFrL^YrqQckK7?rms71yfC_W>j-3gbIbSLklVlckP5zt*F*i1l5LW zOSPlgQyr*|R3|Eu>P$sZ-7qr5P$Jcn>P_{f`cng`IBEzrj2cdjphi+JQZG}ZsWDU% zl|rRbuTbe!29-r+Q!Z*E^*S{b)SXYwrreEA)(K;2x}Q0-l}y(o3`!Rcj(wD zvU8WHuHCu|(J`@NkDk4H_vzcOfByjk2gMB@GIUt{@aIRoFzTg*(PNU5Q&L|^&&bMl zO?Z9Ew7i)GvkT|GIsdJ9-dplvcq`q<+{X*DLzl|U#PZJA1q$*$>Ygfor-H@~bxVCb`7M`+G)i zYViFY)q1Pyh1Pt2UEI2CQH$D_hyNi$ZE!70Ym-Qxy29%6`cn+x!S{oFvgTKt zYfZp^d2Xz#O?a(}7{QZ%RaJL^1n*m2TU@X6Rz0mlL>-XN>b&)ftjQHfuIH^Eqt;*d zy*B9o9S?+qHNPj%hzwo&J$m-I7QuBr;6a_Y`dJ-;KC5lSM|I5tI<3jfLrjNwfA{OW zKx9p*r>eHF>UyDd--$w<@AtTd=*fG%7_~XnHfv3azdq|Fs`u&Yq}DIwyf$fZ*5Yr4 zX)7m$_e@yRV}4xxklr7R>(tqQ)yd6z_2O)Yenr@Jv;WtVZE@Qj-NJ%3ay;;94rlmb)=Vq(HGGfHri=GQ_x#K{K#PzxH&6<4MwR!v9&pXU5%2#!2 z+%`2kCFrFA%>(0Cb^dhZ7@@Jn^^3J}i_iMJ+QI2)OAl_*P_(~d5mp6X$Zl*jrxg68 z>p!KNVPHahWSiD)OOl&>d@S>Y@XV-p8h&-^ve}TC_1b{=Z#~T>WrsXR@3?=+-#&gs zi=a0@JJPhplCIqwd=T4Gqz@&K5G{Cd+hU_zZ{a|=<;p%E+fC|^4Uv$mV|_uUGon$Zoa0KR=2+KxrmnQ z!}X2U^JBEm^^xHgTOQp(-!$6UCnqq^ns*?C@yltu)xe*7zNueMmjQygRcgnulYSlA z&%7v%?0Fz0)ar=r5Sg`s3vKq!4zz5#wPUlMQ~IRPjmJzK^W2Ek_}n!^5{9*ZAus8* zSFrHf_;#Nz#h=rF3_{7YhRg=brd}T0cL*vtgocI3LIf9{VG@lR{tM_H=aR zb=I1O%!zbN4*8@_L-&$d_9iFWjtk4rf1@G)(eMyq&O7H@uFtbL^!c}zXy`*Nb>>mR zSvkG4lezf^QFE;+M~14@9kzPJR)O)3`1rg$=fYJ6rM&xsRV@3UNr3;t)vHvFyr1Km zjQuWdT8EbL(^@^hwr!}%ncOe0Xu?8QUVNue?b_?{P5rv{YM`Gu!J{|KO>P!7w`0#1 zj(H1%jSW_L5(7+gTXyYsiXQxv;0!h8zBkWgUXf)~b={uVnw2(Z>PGB8`||#$-_ycp zp3A4CSes|u@mxCMAuq2?yHtJj5NsFZ<e_MlGB^pM&@jJs z-y7lArB6IJq*Qq++U1z>pd-}ubGql)h;lX!5KeOC(E{}fqw&%=w37ieZ*Pfm| z?I}fOgU5b$En;sq}5q3ZDT=Nz= z{+rvLtI$eDgs_==o*vjLdFg_iRi_SlK1Jxug%_$${w#%Bl2+f}xJ)XI{^7Bwyb_=D z@}|tc?YVSK@-`XpeN{=B=Kx;l4}o8p@PT)7ai!-1_EX?(IrgWj?I%3vNd&sebHoe7 zJ{n^bg79pbVZ{-=JAs(wA_*^1CL>hpI?etf(OvHIv&omuwn_0K)m^5}$zPk&o4 zrMx-v-jgzKV|_4S`=g(>OQE#wX4T145;%L>p7QM2NJ_}-5&rYdJtsYv;ib1=k46g2 zJNN118gPoI)Ph6nYP~-PU-4Y`Mt--h-RO(H^m%y?x7K=Z<<)xW*%;ZpMI7mdk<07t z_)={IZ@_=~yVrK4a^sfMOK+|5Ol$T-`Ij3mul8)p>l!}y)O+9DTIo5SM`vAmQo7~g z$H@G%@t3R1j(JuiyXFIymw)x${cjLTw>$k{SLx%^@J{Kw$YufQJxsVEW2C>$g2SM!S6$JG^ts%&wB0Di- z9G1aR&JeH96&lf|69s7pWEYuZUP&J7LU9?n>FLhlah>{PIeqXF*Y+h8+kZiO`hzPePAgMDGH=VIpIEmiX@sz%gMr; zHE~ROayT_MF@uC5W=^s*D{ZVRH#^yvCp8Ar79tIRyaj@m^yG|juGBv#$VnbIJ~_ix zli*L8rKF{!glu#Xr7g}bfv;;uJKQ=Qr1Arwbg;RsPBCy0Unb|-k z*#X0kh-t_l+UKEtFSIX!d?NqwD#apR@bnn%XV0Y8e(>fT>g#tT;Snj=TRxGm5g8oOooC^2&QbD{_y6SN z`1U{jfTncdDK#mZh%Z`p%SfK&N^pS~b5b(1ApnESgPdfdYJ*yKb4||jN^W8Y^&d1O zq0d0E$A~@ydnF7T5CMQUuB2fI~1hfK01UX}~ zGqV!XlT(O{ruIFXh$$&=R+3}~qML;5%!yKte-YyVJ_&d!UQHY+#4G1Xpi*7g$;k=h zvNIt(tX;#SBP1rIWh5m}LczcQY7dD~y{M3tWe~!vNijAvJu^FDY~t9|y0CiPzusp^ z5Gab!Fp(=xYaQ?G*3CH<=uJ(`NlnN}O-pelg#JCkkzio_fI4Ijg(yc7)S@LMDIMgy z>B$q4(-BM>tVT!*7(xFDLx)8ViyxW*4w9Bx3%Atkb826ubY2uD{5dc?*(cqC{Eo;? zYsw@P@b^EP+-eWun}=E)&7SMTb&NCzbm-i)MQ^rOA5&oaEy29Fz7f%V z?D!!sQ?4n|gLKX@8Le}s4o(oVrzK{_y*7Pxmfk?oGKS@JlK4oH9#J;Z|L`vappw2q z98n&r={tYdA0{S`$pZbSBuk8;4o5@!^z2DJ-yHjCmIYmi= z;|}c-T%jRSOSSZ|xSW>V$a^TLYe4jfgxKEk1N$Y!MZeI0P_ziJC@-T%tjv@Y$h8T! zYlCWqht8Iguv`)()}*Lyw7)bg@`RMCWw%^(vTO)mNsdy$1YZCt_0PY!Q{}1D`SR5B zXRyx%N1ZNDU5l{Mc%FxI{#Ks46yXBg=yT<%I=F*p5zqHqK;k1T3-NBjjXr`j#}NN0 z{KpahWO-`diMseT>1v)eQfaio1R~1rKd4ti|3QQL#m6P|5l18dZxrd!HB5u}3ES{J zN%yM9nI?Os#I2F}_C^({Y-8+|!7YIM0`42QZE(6K6{(})o=2Q_;3T$Q1JGZdOR0*~ zwQyVE4#J&>y9MW@D^dlx(QtWiOW|(89h9Lw2JeVNT)pfB|B%H3-lHugkf^9!oj%67)sym#!e6y=OnPHYz2 z>v34@=-F*!kS9 z0Wkd@`{g?ofa{OgoF2CU+x^%ho=1SM8f8&p<}jJqp*JhqyYix?twIca&R-nVSS8L1 z(1@jGooLh>#ALNe{K?-U8vSfys=^`us0b8g{td(!l~bIcZ7hCZ3>H`0nu)6$goulq zJ}0KN3=^Fl!o^M9TZ>!@X=p^o%(pfAliV_=s&`or&62u)p#fZQD zB8s11=qdKQ-&@?^*H66JV1QWJZjktOzrkXgu|vhlZ^Vmv?>sN|T>XN$XZI*ke)%Qz z^U>nEz%inubCTF;M2e`Km?|z<^oqFqhjel6u?(@-<1F#bfE;mZw_MRNW}-NH_GB?` z)f?i~gHy%ehtow?J3}mOJX1W~AzzH?S0Fx4m?e5#v&CU^=ZKF#E)*-jcZ*^B=ZZgG zEE3;&{HC~3H&1LCGGDybeSvuQ`M1QLSqsIBg>Q?ym%SrC-1x4T`P(8f{Kk7?2gUnh zLE|OB=Lh2b=l>;Iay}HN&ihCVUHP%-*tJv~ba9!u``L2f_Y-ker%%Pw_|L@tIiHKh zx4sYq)_f@@A6O~gs$2zpe=U}Vt`?1b)`%aat`$=Y*NLxv@s0T7?r+8J72g5>KZtCL z^=eJym!f@ki-$(;5jRcWE1vmepV(pVesTBB1L9leUy<%0+Ut+=fpM1=fz*=T@V{>xQO<=Bqk_- z7yGrpBBmx>6*suc#V+4fh&Rt(6Myr&j`saSY&ZIb_;t}uam4ytVw+31#ctZW;^Z#( z#NWr=M|(dI`TsL%IB*f3$(xR(%~EYQED<6Dj}-T!rb&l9HapNa5U0)KOk5H(<~ zaHjZ8Vdb~;1g>O(z-(BEwC@P?D~lxla`MRg!n>{ygznsjLTTYgNWWD0`qgE~W4T~y z@(J?!R5?nBUt5JdzY-p-_!{}H7GgKALEdYHh%M`o|2Kf;Ta@vg zFtgx$l=Fk&?6)3eZ4jO&`vvg+BD9bE6)^uQoa%lMa32)*3WosuAt5H}FyKEd zOlebwI+O`(oBW1){3aN5M^Kj|!oi0}P@kiM{nSy^>6l>OcntMAEU~!D?&?|8{hTmx z#W~dfyzqF`dEnr@a6o?nc(@>(-*ExBxG40@y$F0<6iiJn0VkJ)mw&kgyj&LAO}q@; zTozUa{SN&6E*vWP9XProtRH&?c)B8FFjs-As{*s^D)4nxm=#qHoRtgA(Q@FeLMR+x z0o+vxO_*!I-!+EKBDt6OVRvshBkaA? z=QRpH)9PLqUN_wUe-J=3b-%SCn8So(4$=(I=9pu^?}Yyr{3N`7SY4`mz85hkNyMCF z2y}(wF@Jd(^PkR0H^LiUKdfG=I`3cBuXP{ld}KYUfFt@30vus_z2W-9<-rxe6~d7v z?N+!QaJ%95!;v2gC%}ntHTl$}uhDI(n`76_j4`{d3zn9b&gU?LmKKgaSp!jyARD;8 z*C;2M(kJxn(|=fxAqoAXhYmxL&^U0VW+su@Cz<9)Ckz~v5Ibl<+>jnahxQpXu=YFV zn%?jI2MrzCA0Pi5i=xJ6W~8Kz3x6#ax+t#6l41ra`!B)BCZcug@Dz%IG21tOG;vB{*UNn|1}X+4Cu`nwpZ z&>fj1A&6v2{E&b}IHP1xK0a|0e3VoYa7v;; zCnRx_ccqk-HYqvXx41`SFF?;Zr4>T`YK-pFvAI>v(GavtzvO|PpL6IGGK%rj2ejxi zC}nuJaHq+iXXQ$BqgLIYPaD~@UDH5=Mx`|dHEZ8%RL0mLF|C_4uvzR4gCk;xCgr5R z++S!D7ScGhW!vZh3F9ZcHtxkZF{)FC$gVvGzm%Fi(Utj1;)r2=d-scfVa%&px!cJ# zGNy_`;B~|Vz6H${zv9xc{E=pt6&rO9n5y- zGPjI(%0HIP<=&8K*rxn)#?8;-W^(WGGr2!x+v#LkH1`=lQ2rgimA}HzQ}BMD$#&9j zvn#k+^5*iV^80*(JccioEs-sk{lHI(r^B0m{pW;ZY$*lyhC?7z6?td+aO%woE+$7Bmx7c-c>%T7kzNNzndmmMlQ z$fa{zWY75FoS)(+-Xc56JZ87c_oxnV6g!b?#gAb&0mk*Rjq;!QZSrt#uk0va$ggKg z*dN)&Ofz;Fr{b?N8<e=4*OA6V2M>X02Ik;`cC4K3JZ^lrYD6n)!({$Qvo1^GlW)xF*bW=0$FX%*uVm zFXBJp9h@J#p1#XIU|aCpnJ?K*daTp}|Kbl~J7x$oI1nF4rv%n9rwt}psZ7~4bs zGP72Ozr2=B=AOw`BGjMvS8I4V%kv5@Pqt4M!^Sdw`2K8vHkPkq2C{=uhFN}^`-C+! zE7>w`x;#zRo*N@;$ENc%$8f)bdKdFcxXFxDwvTz8jg;?XFUz9k@%-ETG`})giL8Vf z#VzF8GmR7t(f^Y;E%O4iMV6>2;=&mZ-+=4Gf28=GDQ9M|Hs%03mo>=ea;up#(A8cx zhw<4Y!w~N9Z~F)ca*o&6w5B~Hx-{Up|UU8pV51i_!rG68Gpr1_L;1Tt>m=qX2!tt z9LxK0C9=Ep816Wi#&wo=mYdjRewExoS*UC|bC?NItd;NK)^U$zpUOM?{U967xS0+7 zY(AcUm-|IFK(UkCB-_m_lub~T%S*XF@*6UhLg#lz7Rc$iW^4%m9R7}A-(g!bi zXRDZRnF2PCjbLvn@3CdFXI!aF$!oYN;6_UstK3f71AV)@VlDr*+FzE>4pEF}Q)Juu zPuS*ui{Zzfc$%|ni;|m z;fJzaSs526yUQ2Lv-q)o-^$LS6@s`@_7ppviG*6C+AjyROlX5=liBx?{w4lZ*3M?| z*|N>tS}u}3#QmZ=!W?8za%W^|vUO}2vxD8i?cjECdzt<0LGAovJ>oKwvS>E ze~*iiZ{V+^&4)4u#>joe+4vVZJHJN04!AnRxVTQTWcfIr<)ajfxckgkveBU8qs(&V zWB(NXRsK`v0@4m*FEjnQ!Q3CrCGG;hl)cBUpwF>1Z{Y26i$=!I;Q1m zX_}ex?^zvNB!A46F`qN{*+JkgJo=D_>%yp5RyGEGXgJHudHHJgJ%ya#EqhP)9+S$v z$Ar_zkbzw8VDqk)CPQFFHQ~rzmH+iM}w)_c{T$KvF!l7^~+9^6KVikQ9!xSSG zV-;zNnTkTiTZ;D-%N1WJ)+yF2_9+f2PAbkTDiyaCPoNq*Nij_^M^UU;toTUrx#DX@ ziK0|-P;pdoL2*@aOYuOV#VnwKU$9>*zxICJ{6xPIelPot^BeCs$#0t99KT|}PyAN; zee3t5-wwaMer0|q{QmH}>sRe3^H=*D{R90Q`*-n=_V4Q-=Re9n(f<|yEdK)kx&Cka zzwiHv|4RRF{eSeo?svzp%8&L}`5XKL{2TeVM+y-s;*lZ=Df0c@{tNvV`>*i-(*GO( z4gUN65Bs0;zuAs-J4G>P6KU)vK!4RI^k?s&`aNRG+F=slHQfR2@agm#>XNEL zbw~9`rBWNz0qRETFm)Ss7j?AyN7WY9Zq+ZU6RLBna@7r$Os!Ds)mC+5b%;7b-BBH< z9!uTRgLLt_mvu?Hsk(gKo4SR%4|OYaU+KQl z?b7Yn9nqcAUC~|F-Pcv=40@Zsk-oXUjlPpUTHi}QN}s5IMW3aALq9`5SHD32rGAZm zgZ^jz9{sQSb%}bf`k?xh`hxnJ`j(p2_-l+ByCzuk z955598KN1XNz{zfWNRjAW@zSUKF}=FtkkU4Y|@kfGY2(SHGgOxXsR`Gty*gVW?E}I zXuE5BXydfQfth6OG;M*lSo^m2Bkd>JueIN5OSK2IN42N5SG9itGu2v`_H}K()~$U< zyF|M}`=xfXcDr`J_OSMh_7X62N2}E7bq<|V*FqPe>#P%W!*nBcV|8gdm+p07#;seb z`%Je+_q}c_F!L)gQ=z-5d!&1&^V4gAnFjif`mXw(`u_Uo^)KmD^y&IM{cQbw{k!_5 z`pyLu^|SQz^zZ0D)_Z((VWDA_VVz;4VXI-E z;gI2^;k@CV;RyyQKcmU$Fg7uU8kZS9H>@@MU??$^8V(wc8m<{`86F!v27jZ@Xg4-A zb~1J|_A(AIjxfG#9A_MFoMD_}Twq*eTxR^-xYqcC@qn?+c-nZ;_=oYXvDzpzSxkYZ zrluCA4yGtm4^ux=lIaywj%l)~z%b0D;dR5?hW8E24PO|(HT-DUX4q{wZMbNtG~6~+8)QbM zQEv<}h8sH?yBd2N2O6I@zGQsOIMJAAoNau|_?~g8@iXHV<4)r*#@~$RjK3Ri81ESs zCXLBz3NnS5!c84bT}|H`HyL*r_Zp8FPZ=*8uNj{iS(DmiG&L{pbiG){m`USXW!OS$A6x zS&vySTFb4stq-jlo5>brYhnwxwX=1##oC^?y<|(VrQ0UjrrKuP-n4ycTV?ysw$ZlJ zw$JvP?WFC7?Vjzajj?O&CVP;*iT$7c|4;w_r~m)|xBssN&2*=cSD&e+~O&^*lil6kB-!|XCoHRqe(Gk<9Q%>0#ky?HY@<9_ocbA|bi`H`8i z_*o3#jA52GmM)fPOMlA{aK=Q->y|u=+cMv>#In@#rDcs}yJe5%u;sYrlBEKi@sTCV zGQl$4GRv~SvdHqW73wbfz`v^KZ4w05vYS>vq3tqIm- zYnF8aIO8nqzpTrxtE}s+KY=su184l*T4}v!ePZQoN^nMpt*tH67Gvve8)|#OHpZ4} zn_`=3E3&<1` z-(F?s9V&;}5#VU&=iU$y^Xe`J4VmpjysV8?TgwvI@L=;-Sh>UhC1-jU;&;+W|ucD(KQmt(nOlcU73 z*KyEs%5lMQ&2h`Y2KWaU1MC680nY`r4Tua_=UDI9>e%Ht4f--@P0+@mtwDQ&ehn%Qx)Jm+ z=xLCmfu@1AK~RH;1|1s+4SF^h+<@pN$sq#JLgQ15v!QLF)#i0g@T_xXI4kb0B4zD9ezIlO@Q8%iACc5IuHLQ(-Y`yI)i?N9!HO*6X;R&aQus-2he@#o^&iN&{1?J zx*Z)shtnKsnp zo}`XbN73pBaT0eQ&g1UF&g)ic3-uGViCT}7y5CZ3sWsFp{QH9Xlv+V8r9P(qMJ>Up z-bK_qIN!T~nup7h=TdVhSX-j<@NX*h1~nOHfpe)G>NP48r-NUm(x`DbEu4f?!=rI} z_(f_I^#V>452uFWTyY#V0K33_sXkOMss|NI#bBSeJJpryg44(yaW1(XXgC6=mBVpv zxdl!zhu|!8FsQl_<-{rHAe?u$-8Dk`s!%SCVI@!MUY79dQ)8#c&5aA8X%}GvhWxkr60R`f$?94HVP{~A4&Z}uz z3DUcySKXSzwrOUTbb^0~m@p`ASVBzn&_1zLBPr*k%!Hie#O$%D34aH7O;{Uv$N?u} zfeIIE054wMaDo{kJT$@K3J&1RySGks#aTG7U=bet>gk|MD(FN5ohYEw&|Am(Y~PRM zO!ge}5-56FFYo>`Mg6D!T^y7rC;Z7q?W_IMpj{7yAuKU_+?WLDP$$8JMIttfrG4M{ z|Ge>AKbzRhtjSa=5@wEr(m!^YC4T~rZRbc^&1o6Xh9>*Y*bRnuv-d@+ApW$I6fVlT zr%1mm-M6;U*m2s0hR%} z0S}<3c5qGceg)4V!n$Ra=gNLL+)Hn^2dVML4}UoP@g1N5v^m*-+TKsfsk5{Ja~@e_ zH@uw$t%u+@CjNG1Sb}~l?!^Jloh8zjzxe}YgA5mPPo9*OL9h`1mpBd3hm6pI4gi(t zK?O$qRYA)_3BLktvl)7t36$fc0`Wx-KZ(UkJ&cv8#7i$VdKm)p7vXC3GxFdsfGdRi z-_h>?2owvafK$Nh3-@|_@4+q*h{j#&=0(EkYs&fC>1Z+UwDCf2|N_a=-{d8;I7%=vy-SP)O2bl zIB+3&@jU7+aOU^^Vs&9HIQa(2>cTGY`CqBuB%2EtsVh_^#)Ny4%>@}P$CzQj_|bq4 z#)uL@cci;woau`(XE^;LJq9CDHvI-YgLczz(eKksF>bA;H_-psr}#f>pW?6QhrD`Z zC%PZlPkz_Idn7%OD2kdMOK8@sS61oMFDvVAeaUsGhxLyw=vjyh`}@-Gclf>IruY2_ z-k*Wb{QECwa)v8$5*Q4AlB$tc&kD>c!l$!TV@!oGu!#C`z=ow`577gMM-NRH+Gk{s zzoz*27*wq_4#_45j?qj=Os`cAYSS+CPwx>OLJ3^bPzw;fL#tPtsAr!MJ;a2#A%kL~ zi4GBo_P4(py`TU1{KtOBKlVF3|Jd*F_K$z;cl=|&;~)DS|Jd*N$9_lNKlVHRvET8J z{f__7+wbt%H;~RzjQQ`Y3$mK{PvWfqr?RVhBCuMq*q`ND32EaK$0hqDSdf~*>cZb1 z2!Q~t_Do0?3{<*Y5G+ckEu`fatXTLYVqKkWsIgv?1hq$`>wUs%s8*I%8$6)Tz=YoM zJ$nv_9w?o>__sK|72BWVc$b8}vo&PNC-xc8V<0&@Ll%7A136g3Nk?z~^cgVJh;Yc_ zjEHgm?p#0l=9Sx#^HIB_$vZi>4>75utu&Y>m+ixfB)4p8acL}!57MVU>!1J z$!3G^_f?ZSWt>szAqT3JEOT2JyKA*E9;Ip$wW1>`);pTB0*HYhm?|3Cgn z8xY(R2``ZqH-rPCA$Nk!ZsHKZg9si(@F0Q*5j=?CK?Gva+k*%mMDQR2Zl#242-h8M zIvgVWmmji_%Gu(3evBvapYy%X$CHGufg|C+!jW$`;ikjQfg^F=gCp@iha+* z0XR~hLvW-{N8m`kPQa16oq;3uy8uV(_&Xe_X9XOo>mP8WzPI5>o$teudOwCEb$<#+ z>Mw_uJ$|h3_kXqbCE!sM(Yig!h=>SLK~X^mAqWcC``**pNhEe zC2YznK~O|lA|MK)pop?5K|oPiBDjDeLQkq~ulR-iZ+^Cuo&Wq_?AZ&tbOA5P2`7) zSmP~2@Z7&HhId4MhDSVX``vJW>jZY?;gM09$Mb9U9?wtx>NxgsVRiq@NmoL68$oO+#We(kf??U>qDg@i?Y3i^5VBW6Lt2$0OQq%3 z+b|+@qmz?+_QR5BEOE7+9N(i`dSc)bG&AH99HiSXEv=qs^(VZkE6B4Xq_sD*qvb>? z*W)Y8ho|hKf-?A~VLElf7z%bylK9{5Mm2Ue4QtYm-sFiNdH4fUn^4iYxp00|>WcKaF!JHB-ev1!rEs4HUuTrd z)wiIe3_E*!m3!bA$#y{Rf{!d$WUecFWEnGi@mIcUifk&KGv|NUFHRoat(*iHbRKZ?MmL|{;#gV zn6t;AKW$BillgV+PUaWkt^IJkUn2gzyW)*~A^wq{j`vLDO@1-nIgP+yyx_DdEgI=d zDUX%Dz&~>+O^W*SE!cu_kzfRf4!Y{LP|@;A7l{cVQ!NT@&~iC-1R5A+*kj zO$N0XRFbaT${`+axrmo>k99x$PWAcVEvr92Qq~mf>TXm&T;JO&cNr)}R(@BP7rxoO zdAO?bZ;GmcxTzfD^Nv86oY#Ox-hosSI?k;}CUH<%4n^aHh(9U=zT`&~kTa6r&V!`y zk<|nK^@iY`UolESY7&f)>PTGmb)r&xC-q2A$cXQs+OtP|k96q6-LQ?BlGGFV6^ad) z|2)TkObv-E#rgIA@EN54%zur~e+=aDpE*YP^Pv34TKPnNHQ)nCeuDo<&RrqrSKg~8 zq`ZN+RZ{))1!z|t{b^Vnw~Ht8X95yH0X~4xz7yz8`7FdpiZm1?Q7iLAewy3H1e~V=XiqaM)|>OnQ+v$S+cT$jobsXh*T{vbx5n)? zofjUTe_NN?Iy<0S9}>3v3fWU16-B|P2L-<>XmArY8fE130{C!72Jx7eRYqmxT}495 zfB9Vp`W?XI{}OML1NJNJqwMg*_AzRPeVnw#K0bQhI#y2TO8PHVdrOXWobc5g>*(3J zlN?U|UY z@xx=O?LG2}Hoq2288b7F^#3k4YTBBLHY;1krJg?g<&itP$362!N~7IpD&vr^_1idk z-<-Gh%+tA7Uj3ro?@5aB%GtO}&0l8c&zZKn@%n+0vECKA9UE;YEbX6v{`=oveBGKg zYiA{#`_ud>yr-PPwxRz_95HTyzNvJ~w>?{y|MSIU{ALv9Sn7}u)9Z{OaFPjH2niPk zxUV&ZL^uPjn2$imPO2-ilz5hmEbSPX*Vz@B*U1G>ot`pCRs#W)I=UpU+;VuC>n+Mc zN_!gGF|KDybW)E__0gq}J>`X2(1b?1I;JIcLmbr;Jbg%^cZAFG{TaBlXW#hV36Rxr z=?OQ35K85RWv+r!`26&`N{h1K3KZTyvq_8(k?^(Y$#r$?11F6Bt0*d+m?yc2XEm31 z2qZyXalw!Rc;d|QxH_g2=M}hjD)Hj^uc=b~snE;u$*oPm0pKFQ<1=0Tfo`#}s;gtS z9(_8w_^wJ<+QrfgM+>ar>IhR5PYI+eUL1oL;&(0WwR*VLAFhpyYy9CFpS&h7uF1`7 zI>9yF=$ejrO;^4)XSg|W3!|t5VN}(jFlyDeVN~rmVN~j);nb@0VU+6&2SxuJM%A4Rqbh+_ zIM3YRpejBHr^)~?kPD=a#;WLatOm})HJ^o3nIDH!`LRx_5=boxqpF|AUb9EAN;m6?pX-T1Ev8Hh;IS7a9z}&4yrxQTLYQ6KB_%Mxi*DU zQ5`7id891^&b*GaOT(%2I8sPg`LlyMa}pJI+Cima!L<_48uclz{UnTP%{ZyffDGtB zt8L*_-B#p{d`1JVkMRt(4yqFQV-qChLmjQU1ND15p8qz~c}tw%i8g43HbB_d0<<=` zrZt|q5$byho_80X>r@y;1GVk&obNcO+LfrsRVWMMt80;dH{$O?Tm;Y-@u$P6h+k3f zc#$8m0oaIp<2-5|(!GNFG)7%wBd814MZASN#-`LW$dkGrZ4Ec3t{YGu&@xemYJ@X! zA9^R~t#LoxHx<`WH{iPF2%}uo`>3lo!l_z3Z{0B518rV~V-=pcE|a3pVAb4*_RoAi zoEi;O19UsAH6KSkp1?IgHE`yBlyxlX1lLSL{Z#=Kz-*ur^;owPW!~kWB1oO0o?U1Q z7wRe#r~+z%GmoO)aEwEHGzDA$57eP7*cL_6dmL0vCDH>EkgpGjKzv7_1<(p`qTL&# zEoq!L2BLuWK*Sv6@4+(*D31=vPO2L8OcUoS?sYr%qmgS#zlpx&W7G+b5j#;YIIjUx5v~L>aZUqKh;w~{b<|CGmK4-y4;%ryC)y6jGk_2DGl1)T z+~*tgyStFzDCCQ974Ah0GFIiH&*I*x(a0aG>t}!}193P;;Dud{j(gx(7lr%bZADEy z(#0Y?2-lGOP!1oSw+5&KT)--z7D&aLu2pSuZyogxLy)Ry^x5`kPYz)beL4|w?a((2 zv=4(YP=|9G$0}eI&Z|jT1w4m>YjBKk<9a-E=22XC1ayEt4ElG7-;VqJ2-*)wvj}|+ z&zy<6cdbKtK&!$vRX9>W4Y?j^Xz;O``M_M%&)2}daO!#R!)3rm;7i~%(D)H2br+xj zi9jY$3OotS0bT<>06qcs0AB-#fwRCRp!r}Ybq~M;i9i~V0Tcigzy#n$U*8-7%0K@}nKrT=Qj0I)@F90imwZJxDFK`Gr30wx6XFI7j zKv%#7Qh)(KAut-42`mQI0Na2sfaAbrpm~myY6plwPrw6=24(__fp>s?zzN_SaAPj& z8(@LHKrt{5SOlyE_5w$Mv%ud#a}W9nzyPs8AHWMt0%ikm1KWYa05t^d0CWP}Kq}w? zihxnTG++g=9@q|i1N;m)@=%Y!eLz71dI*R0aJjvz*1l} z@By$FI1Ky>gg=Th0CxlT0}_w`^a2I|`M@w>6fho`1}p;B0iOfk1DAo8Ls1t13q%9y zKsGQ8m;gKnECE&n9|HS;AAs{fc%hTJ8E^q2kOJfYqku`k9AE{o7Wf3H1AYgZ6*;Lp z0S<@9%@I1c;;v@FK;KsO)*7y(QHUINwvyMTkhZ-CQ_ z`vDIC8qgic0)_$8fR})Gft|o%;5^XG=cGCSGSD3u2n+)z0CRxXfg0dT;78yBaKkXj zB_I;ufEb_;kOPzexey0 zk{U~mqsCJcU@`e5^%QnRPlktzsn~ly9lN7vK>wTx&lR(+Om2t8m7|9a7*gA5qrCDax`-^hi4Et zZgkx0fU7$P9Liz8_Z^Nq;WwnUqYZX`-{WvO+B)uaw8I|oNJj_9eef*O$#FmSgLigx zfv1rN9W-`^vknfPM+Aq6J>s%Mai|Ur-be}yvWd}k7rtw5VIdXgu`IV>DV=OtVo~v> zu&BcKCu2ONWeL`Y9;rmzmN6EVPRX|EV!D?EN&_+JFma42FDT57ukaNXy%bnc_&fwHB+ zl+F5hCFn5)W&JD*#b_T)%5%vV-h!kA7?G6bHy|a!tfT>#@E=9%nD5CMnuhoE)<@_p3LdeK2b;~ZJnpCxCF^jNpH zBT`}lQANbwpftMBm!H+!JHmRfIM0wQm?v1b^%Jlo!OpDI7pSQ?`?N6YIVD^#2lO}<_MV|)@9BB``9PLnz7RMOlp1g-}kCgb=J2MmR76LTf0k00YW%Rl#g> z-z&?TRt77P&;nYG6H=hp(#*ZRM+>%TT68!~D=xqXSHtv@n&9;{^&5e!&uALs}nF?N;VX~;nDX?+mV>PJcZ zm4pU0lN1d3Ylie8^u*rQM}SHGgy3h$fe`s-ZXhbjYw=MGv;c*S#=?SPI|cFFQ|2v+ zAr`Lb-X5c@M1CT;Ha?RZN&&mRl7hR3rs#q1%Qgs)O7~ishZ4b0@(8a9rS*obQ-dpe z!^)}5lf;K6vO26yN{%kHjA%VU9++ldpB&@=WKC~;F~&+na!3x=8Ir|7aM?VNkZs`* z2f0?_9T`Y#6G`3Ll=9--LQgE&OpuagjoIX&EC@)(1aCrvw64~5Fgl<-mb%7makE#%YmCPRw2$E#5 zG9m;?4px*M4#_Mb3nSN?$ELxS&PqWDX$>g_g@vRk@wH!n8jSFe+Vy|B$hsOaR-duU zY;TqbL$Lmvv#>A8t zT7s=UHrT$woYF8hJ)|RBHz4sL4;4ZTWeCYv_6h6S9v-{y2;&Hr3xlp87e?>(m7i9g zT~?BnQ`QYlUu^XeaK7l`+}<8baZ0wvMeur}8rm8ksS^^a=gZbzy;->srdfqS7LbxP z)Z>?PM4nlXKxmc@#5W+>+&f6}KL89HOY1czaubUZ)Qqf&gj}tv~An6H8eC`UzJEh1Bx0pit-yZL1iZq&%lAD3=MX1kwz8T)p;V z@w;HDp^h+OgeuLSCRg}rNh#4eIpsx`BAQy5Wpi?T%PfWTRWMDfQb`y+ zos`&rng)#?)e%oNQd(rcRtAPxPxF*nEn$l(E0v#OiK$RRpT0zJ`6+4kXW<)$&=grk zc40haX>g8bMK{z?{()pk&?_{S`eY4N67sm^_ARWl6f~iqk61&;7L374Nw+zFkhl87 zfpM1}NA&4nL)bxo0|YrNDM~O97kfp})+mDUR|Nes+^)J1B_Q}vB)4F|s)&Hb6%u2s z64pqxI*|4J5BKRCc#NU3g?3$ACwySE4($U`OtK*--K>+oAt$}5exB^qfK&wo_e)8O z>hl$jv>1H~rUL~C*om(q^Y~d&G1$zOYYQWi0jcrga-UT%KJ>!kvS{#4D`l+pRXtMn zprT@30p+n_A#9mqU1Og{_wE*RMG#qdLr4&C4MWja1g}ni1*PFF5DLwK1g}ni1qBTg za#O3B{AIKSofT=H28tUD**CL;$*}h>ME7o(D1`b?i37!Nm__h0Y;way4I?4?g8YFr zi#?!9twNJYQNtzz!?ByDq_4f5$w~*ReWNR>3I4CLqsBZXL_;NaKx#`0`_Gf1sitNX zK=N8@3)D6%q9iN3;jNSWvwISogeYVacrJesRc}`j2@}>8NQ(2^V0T2MrI}cfkU9S6 zu@fU4%oOK=rcJWX{kfyQl6oe3y+iFu~?+=7A4u;lyv*xb2O+1e+q!lAs3+HFfT;!M z9#ABE`p9NBJC77kk+)=|#ht9%goH~-dW&dD>A<9m6f(6Srwlvw$dFF=23smXC91xC zot?~5!$K~L#Z)si-s0of0D+BtA*o1z4Gkw|mDV$)9Gj*2?`ThS0z>UeqTSF}Qu~MI zZD$bZEDe%^_zxL?+AsrDRf8rE<(B_uLgU;?(3&@peSwlRSM+I7!1XDtTAziZ% z#y}z1gx$&Nd!tn-s9yzSeas#y7O9`NWT>Yk9_xMNMs_IJ{p?_J7Iq8ehs0YY3<;-= z#BL&TIqDCBEy#jOsSK-W$kNnRi<8t)GBZif%0`n6wPq>)b4Xqi)0?bdQbQ3U+{6lC z)&JV>e`XD&R+4u<_Aly5yu%!ecUK{_1E8%1EfEO(PJ)&=u09-~lVd9A`9LKw8(0q1 z0JXpmzy+Y`c)ZsFM4&e?1b6~?8dw6n4;%oF0Ox^56P(n&01w0gG`Ow~TL8QXNaD6h?W9%s;)q;dEF)T0iKvnegz)EC4ifUO;O~fL9p$Aqj@q|Wh ziCJq2^jer*5lY%fc*`zI$9}TtQj!BXqvnv9^n#qBv0m)#hX;}{!pgC~5ld}XKGOB! zNu_Zyv1!R3JE|x0r znr2qG;^W08;X4KesCIOtA}SB(-fV25cVrMLNR0@~@Zag3z7U(59bhUug;;;oI{9)Mh$Wf30|M$%tLQ39uDt0 zP9%n&lY@x>eCQyQ$I#StC)qMfa+&Rfdy17&M}{b_Z)IoOm1@7IU=Vt zhukCVI-FUt8yx=ShZt`KIuk_^KK_3h-Q#=rh)?EN>!mGj*#h_b{{=;*!*fc??2>gv zx%#BV_pUD~si14W1~m|I%<>mRXvCk13uq93E%4v72C7fyw+2?ghfAxflh@k(zh^7| z^HW8@zdd5w(D%}*bQV2?o(d2*aOSKXoRRfp@9 z`U?H1P8$VAh5Idco%?rpnAyqHOyYY5rpeSP`W&6c3}9xnFS1Vv6NUNG5^1_TTYf`c zBkz{KlxHf>E0JnvwU^po{Z;!@yH&qahp`zc3iS={{~#xFQQ`=>L}9cY?!E5a=9ean z&B%Y0^KK@Rd4#!+Ysz)urf@Sk7k?igC9jshkT1&N%0}g~(pJ5sJ*GdaZ`V)gzv_SL ztf3f#j2z<$_gwe8?gQ>-CT+qv&H9eXAo^8$6`jcRWR^1TFPs)qshZK{-z8u6Pt(ja6^e?$lDW zbZwH>O20>s)#Hrr#w_Cnqp`cWJHtK1y~e%KJ=L6VE-~LRVFU-eH~7M&ThTk{y|jzD zj~T#bu`jSMu^HSDZX7q6dzo9ojTI&dON7^iM6st>BYq@)E#4%xkp7k$$@j{gC@^Nzz~ zbT$79-%@Oia`hDprBX>(VwF?MIiOJnkrpJUap7kA>IJ!IiIr|Mem#gMl z@OSY7uk#+hkbjn+$M5C8=EH?1LTjm=bWt*u1m%?ayM9TZZp=2$xi7kJHd~o6+Jl`T zwl1(w^Vwp7m?h`ST@+p!sAMZQs<+_TW7I)vjyg@9rEXNWs25<+HcgwQP19%Tnh|5{ zFq*n=b$4;|?jG(w?p^LL+?-PFcX6ONMSMkkQ(T8$@S3zv+Ap0%nL40H4wh%h^Dz>($$RC)a%aV@ zBr2&&h9au*szFXY-Q48Np=LSy({%GibGZqF zMv6uqxacl)3Y|%p)6dY$=$+tS&6(Ed*8&sA3}dD+vzd9!a%LCvBl8RMCv!b&0~sUio*qvC>NEq!>!EGDVrK%u`-db}Pq~ zv&u!KDSFC0^pvkqFE?nNFm6X`Q?#Yp2JJ)bYwf6ZPOH$z=nM7r`fmNC-qfJMNroCv z8S{+SjCIC#W1r!0-|g<`rrmCLHb&QE_e}Rf_XqAH?vw6YOx1kY9BnQIul>aQ+}vj# z#Mn7zo-}_oe>X2;6k&f9`Z7f~qMOhWbPM`U`fj>C-I4A}v$Ra>bPSz9CqowWr3aus zbLmIvV!E7P#&;B#i@U{B;yKZf(xozKyp$}zDsPeN@~-lNx=g*rxWmYF=eZv;AGPFw1NNyDmBvhB7BDlxao*FEgbCo5y>o%oUVO3R)Q`5ko3e+<7l6s>?xMf?dvu0|ez%i?|IobkknYK}z zr@yXm(g_FpTK`dRV%%ojZA2QK4GrA1%6Q3GZLBvo8@r5ejLSw7_bu)_+%ETnZWFz8 zgL{kn6ZdD}^k>|fnPm1gA2IXH5_1fBPIOQo`e=L9u|OMiBArGL#+Y3|zf8YQucf!p zyXaS$H<{0v{mf6yB_@LH${K7uo6PoS^VlcYUF;X^0rm*{8|33HTxWcO$IYd14|4^O zmB+cW=(mme+xfP9XMPCp<45xo_*sy}ukvw15226n2)Ib8@C1162g1j~XTkyDN8wlD zXY^l6YAoF@Js_!4rj#d@NE4-*(mZLU^p_MS-yq*Cx0iW2R`$q+@(9SBXXKaU74n0M zqC_bvN`LUaB4wqr4mG?}*{2*L2Q5wW;RPqO~Ng zm)2j)&>lsdzm2-ys(q^M(Z1Dw(H_>b^a93j73`uF-N{V#o~@w&0b zcn`h4794?vJc)BByZb?=dBEcfOrKd{PBv$nbIhaY<7cfNPDMGW{;2Qk>E?7xdNe(i zo<+~6SI}>RM>YmuxShF&xu0Pfnc2d84o-Q5Im=vxS+b8E4UJ|hJBwYwE@hLse%xS4 z!wPOZ_cXVW`-t1ceaRi;e&a54-}1-!)BGR&UBZJxf{-EP3B|&2VY)C^SS9=dPH~-h zvluBdVj}oO5&H6Iagz9=xKwNclJ-mONeoZ4N@f{cAuov*&Eu246ryVU*aZRpAOYogX$8w}q1 z9D4H0+Ur`4wi~>px1OgL>%;XY^(y^E{VV;T{sVNAMn;5j7dXjgt5&}@P8xrpW>t5z zJIS4fdiA-7n~$3l!C~i_E6wfZ3Gj{!q#vg`sJBtCVf0P3i{|L@sM%-Gi4M14BA`*MAq z{;~eK{tbHi@45qR;xZmESVJ|EjedsDm|)B>o--C0@1UJ_7?IE)1h)8 z4EJ;HSD_2P=k5iLpK0b}EIeUOGgp{zn;Xn6=BMU<^9XcKG#LIjqMKnXw4o!>Zqd;5 z3uqr*L08gG({t%tnY);Ktq~E$bceJY$y9s3gPL#rCu#d78>~!{db|L!; zyPn;~*0RUIkuI=dTnp|V=*2PMN$K1m&dZJBCUWPvOPrIB;O~Yu%kimvKYp;KXN=>g zV~((n-^6d>KjwF$HNWD&<-g;9Zagg}2_yc6reNv1x!5Bsyje_wKo$;j7 zLSx+H%thu~=0>x|{1DQy7V`0H$j2j)kEhVb&lB!ZiG9IH9|rl@6!P&l$VV6C zJmjMr@-Y$eu{Y%7aOQDlJ+ql<&%Voj${poSau4&F;J#D&0?8+Bl(tCUNyjW+dZRj1 ze;+#KCZmpwqblqz#(_Z|UkL{VUe@Hva;Q zhTn2r*P^` zbzR@;u5}-WR@=yIX0}HEI0_xqfxRE3f3(63@P0hu_w*S$f@uft*oP@Z&f76RIfT5= zLu)c2k+Q9xFc8vbGB=M~4W4+4YsSa&DbOT~`Nz<{2l!L`d7cuQ3qJ_wgqC7Q(G;`A z$HaN!XW}>FFXAP!iPT0~BW;zAV8k_(8Tlc3D4u`0TqEz0_sb{cPKu_)L&^+Np2WOu z5oQ|epi#zRd<|Eps;`3ceXri7MQW_3YTdN~S}o+rB`rda)MNCA^~d!!km5TqwvOs& z^|lyMaTrqrj30=QZi|d2*cMVF%M*jHoVX{ZY(w_SD5v^*9Yin z%q(UNq}~o=FVX90?5)M&Hl__TjQz_^MPa`!!tXF|s7KT$nub0m8fnnnzct#pAHl45 zzxxjGrNtO;r!Comz1m2h2n~HEeVD$1>B4Mc!r5EdA#635#aHof^Y>$1$BLEGM9kSg zgFe?9^N2~xVsP3hZMIg3xxp!;6|}9vq&_plta*PF{VctaUci3F9%g%D^bH56?orSTlqPHN5cmb#?7_5OMWW_yi~)_vvl)exXhfMMHd4945|yhL$S#lMg80D`8qwZKy_aSYcx3jqw?VJ&0s{ za?B#gN%Cx7?s?1&`%4eWz2ujar=X`1o%R*IopHYrj~U!(aGu@9PsVW6|02ll_uP>v zO^R6w{dEuNU)Xmk6LF1M!bE7Sw=fJ7kM*~FW)$-@){5R_K4nfamoaJ@v-hx_Srz;^ z8S6I1Y#BQiQn`lx5UXfM**{sz(y)@aOvvI1Sj*W8=_K$EVSJQft!@^-kbj5&kpBWY zY?yG1a6fd|0YZT=Oc;q3pXJbD52Bt=34cJ7y-|!1TZwJO2cXTWSP3W;OT-FsqBsZr z`~&DxE~%@;NeVRDWT`@$CC!xK+{M2kEm_rc1QNA`mAOqNriL3x#O zWwf$i`ANB?gsC0S%ZLWm7uwSZ^>K9q)=)lE52@!=r`AeqqYZ>!J4Txb9u~yno9E`d3I&rJG6Duoq(mwT|dK~kn>$TRFjEjMc%h2+* z(cmLfFk4*#J(A3w4r<4-RuB%!9;vf>v_4R;(5LFp=nM2uq3a*gk6{MY2C^^1C^M>! zSB;h6?P17_5Xm0OhC6jo7{ z808_Qw=w|pzDJc3Wt1`w>l)7}FIdv~EoHs(f%1v6$I^(8E59li(5_9eHg>0aFZjnc z^;`8P^(O5$ZJhpwzLm%x_`M)H5Jfv7#fYZW0vbqbOV^_5{`4RsT&lvYb;?@qb8a7I z1etO!R^AF_pIio8^wHq*6EMoBp&e&Kdsu?ih!yfG`E7Zvyb+qjR#{eb%vIyCB9)9a zsdUU)2Pv6KCA9ZR$~2`4E&n{$Wva1G@G7|7D&=iuE!J{z-)i`I!GU6(7->z}2(|^= zifzrh*!FBkHVQMDM2x#s%x3ztgV;(J3|-n_{%I5UCpYn!)9nOfJT5A=b~! zm`i4y8qGm>gj(l#T}j!bSskZ1zL3PLTVs3{63PtUPEr>8ehpkCS}Tn4Zzfr?RzAU(CS9npXa0VMf;zqR({LV(tu zp6~ztpO1&kUVGiwdtdLm?CGCtb-7(Gmj{3S{VvyfJozsqf6x5WjO20SpC0FWYU~RW z)@xNSOsHLSXG8ANWlO%a?DJpF{le!LFJ2PKz2l3y%c6^O?_8W)I-@4{%S#q~@#=HV zIm_=a#cANV0rvgj|^90G+#1YO?-wjTrmRTFV-{{{4(9pYFA2BGrLcU8~7dco%-pT}!6qd0a9 z&$S58A^$?Ig7&MIsf-(EA)yuNb$H%&a=!VYtM6!NVA0q)_~{v*&UpT7cFk|U`irVQ z2_rV@MMCHB{Af3H^_?o8gdt!l^KBcEul?%qEw!vWpFg?C$8qd9MZQSA>|ZYP0k$&V zA5M{PS;Mj~AdAFV2>A%RU8l3U-T;tJP@!daKbi%&lM+@*1IVT}`!`PTz*nZmvJk}G0w{2*hDgHbQb!3?{ zGvhm=O;5Ob>^tJ^`h!;@-AHQYrAyC!>y95WHkD;XKJG$WNmSLp(|FsHDD{)7TzH~A zJU#w;G?wf}Ka96C+ zu;2-@qxmVeYu0&EzF@Z=`zKVNZh6;`mc<;uC*A5D1FgPLxZ7!0(_`aMRK8(UvDZ=c zU=lkW-yI#(v-VQ<`-#V2<=7*am@~6DBoLcR)cU>VOt0|y`?q6A#wbEUb#DvGLt{Y%`vTQ7n(H z_gi0lUu?ha_IYzRBp0FzE8K7NYK@av74gh!ZaUH5FDXlpZ$epXxvOwT>N(@MrpJ$~ z_vDH(s`Ye{X{u$QqBDBG%=s0xb#ni%aQb&rw=X+&bmGJQ{=yxk2aG2ENvFPai#A9O zX+!!g%Kkg~Fv^%S|6BH6DrvoRyF|y3e98Y*MM0|ZD^aWL?j<9;%lg6t_1V86f}EZc zV}w+#(}_;|Ye)s49Q+w?=a{vAe`1smgp9o8JWzaG9>TezVH*+?{lLsBlHdp#{#Pj;PtsSW>W2HYA z%zZ0{8}HX+aXcBNH_kvmb5ZRDd}_yxgr>Ju^lKg3^TAi52Uj0G2pdUsTffv{Ej@it z^O$CR%E2T1JKoao+`**4&W=B2jeXtN=n*}V6j!6xpI_i|{Z{5(vmYQ?UGLBR1){_; zYb~F8+qFh#mfm*PA?>K%_SJ*hOWINGT`NDRw@rOdJ8G>w2U+fVU$gQ10TTH<>^zS+ z&tB(w)Oj9rp2wZ%htBha^Xzk;{e0r@c(7BCH;_`ch*yrhDY^$o)OF;|!Iz!s@#t$m zh1|qB<)RA`Lc&j9Q;MJ&@#l(OpYJ-&tuN>xbytbd7f~dea^EV&o0Y1 zPTLtw>hTCW@9`7KM!VLr&tvS@wM2Y}HKjjtzEwL$I|=b(i$vg=AR~zNjyJQ$zIdDH zp%l{F#%LXiVyxAq7d^a1dw%tC(uwtJ88PL(lgj*7O5*1rrU+UnPn zh#C}~6W^-0JOYZ6eG^;EdVltjcf=Nb-5h^*NALKK16kU(j$?YD6P5WCfp#Rb0$pO8 zzOKse3vAamiI?=B9}~St-u!J3x;2RCSF{t_tJb6JYvf$(p8nN+OkY0Q`sFx`Wc2|i ztUk8CUvufuXT;K%=~`rFzn#YHvXwa5YxLC6ard5S5?@GRj| zlp?;=Uyt{Y^PYqE`H1(MqY<0Q?09oSsRzp5)kouNd z4*8P57!NM$)kGq4F<);kqHtP&9QfAD5>5eBlrKgz`IAU?B8Sk&Kf3=IhldpBj3b$O zhW__lHmv_&pLE9lFGKRk{(~buVtYq2)2hlihkj`xmx;l**56 zVy7b)$9G3A5Zz*b;qHa4vi?h)j&z-f)S(BN&lc{8Z;hNM_AP8Z+`*o5I9+!1ka%Qh z2X;9X=AgoC(OtNE=->wH)Z;ZoXm?@H>Wu`B)KjgFzFr>!(QX*j_i6oE>(7CBfo9ZW z4?tOh471}0j%<%!ZZ}YOc50&IlT-UUl3u-S>m-lGT8snGurrZ*xYHfoW1JYTui*sJ zx_6)0DN3jqMwyv@7zjBXZ;Y~5o|Q}ZPI8M*y$vXbl6c?Dv_jvt@90Qo>uozGWyV?S zq-mZ>ng12~7DAbih8_WjZPD8fLaga+FPlaGCG*?J-#)2G_F__lcT&-#GJjEA=I;>) z^|n8tpD2`W;T>55^~x49S+#6ImH2BdWPRioe1EM444}i#cE(_A$eq;CJED<8dfV>- z7!Jets2sQ&hEENn=EF%oOAf=QhS3FnvH_<<5};d6j|8aRwri3{!fldAjT-0!T!Y8; z_+prIz>)Fi@!-oGqeBCxv~9)-_wu>cy&tC0m|>PkG+Ha4_Dpgc8$6;zbbh3kqFZGB ze|DoLtM+M6{6J*9m2(xy@RXDld@cGHD9$6w+D8bJQfge}hg!@;U0x8V$9@U2Gj-0O zF^JHx^q(VrSZZr4=pAztOnkpND})rUIjaZ{_SL7i z&B^F*nd3iCZ_CLreSQS9#PN<)#^f~*u=VnY9zJeD9ia!g!3}yvH|ohwT~2<%IK7vn z9(|p!I*0~!<0`acybIQwKxQkwz$IQpyusg}EL47O@rG!^ z3oW24|5ThE{izDxrWMy|(eI)EKBGMYx&7w?B*x~9)Sa;1GKyzq=<#dO2wvR9voMpn zOucxDXL<7~ z2}b;Wea+WYKCO6`7I_eGF*a-LJ%;QLZ2ko6U%i>X!Gi#d@7^*bs9t*Cm3Z-y z(Mt>ZTT1=sv5?*tE9e8#@SbIFAof5n1nFkIe6z7JPtp*9bgp=jc^EvOh3#*$6r1+> zQ_W7m*gVF*2ZD6qb+nv@4!n-CDP{*=J$C8PSGP_3c_1~z{y1LIpP6ElRN*CNDBp}m zEFbNSJWxu$==_AFDh$M&TVj^gyD<+7ycgII+^!py0D~EInfG}(o!L#G95<&In=>Q2 z@dm(%*>YS!6hoVQ@2Lwx7oKYgGf@`Ny6Ik7L#UfG>&>!aGg@m-uM4~;63CIGw|TMz zVOj-~o^)AOskcQg(su4E+~B74(>?&~fc>OfSKDsoXy{LtDEFA71?T?K0`nxlQH4opd5#&% zhK;4iFwKXt1;^6G2x!-9_rXsSv0q13=vyA(AdYFBvOFykcwcTod2!U7Srxc6P$H>P16-(wBN#u7>La+L6pnB@f==++)s2jvC!U(nP^N$(s{ zNxw&uWlG-L(y%_TA<(&cgM8bmSG?v1?B)z{-=NCN(55!5&A?t%ohA0#(^wS%k@gQs z>aPM0=9`U?g{`amB=*<*3yqF>^=3t}Iit>;U1>Iw(y}vl?l)(ICcIv_-JD%|c}1AuiLG+ z8KLbewFS!tnz{D7D2bt9E*D(OTJ%RyMLT#a8=VMjp1ighRD#zc(HPO!#z>ZZV8|8h z*^H1?*Kf|QH7n}Hy!qymO0Z#$IfI%bA4Q6-Y7HnZA#<8DN&$5rf_`&GF&=pU6dnbs z(K3D$C@+spS|DcEgKek{z^H!)QRWmTY1@HO^R1%t2`}sGE(06^fIF!N7K#fMo5pve z57A#iV--X66rqk1Rz*t?3|T|Mte8`{HP9JvZyM#UD25dPJ%=vP(VIzLfYq0Lejmm) z9s@EPazw=(0bkP=xK+(^pIMUyFGM+ti%oj`0*-%-xhN}sK#w1!-)>`-qvlBj5>-VQ(%vkeT=J-a?p zF&`BG7j;O3Ce0G_AOcIXw4Hw{>{cXaA0ZL9F`MX329L3L9X&ze~YNJ|ExE8CzuWyMa6u(l4Zh~=BzAH575F_ z58;$tUjgpAJ5yVnrQPid+?^Fz?9=1z#7DVTlxNxh#o+Av^`KC=>oNdh_-Yn-#9C^C z$P!Z$w{!=`4@c_$79@_|3xIrvNW5Jl5z|rk9z=zG=-L1hqYXe{T~=W`w9ljMz@L;h zXR04KmqhZfq=@15|LBh+>%Y+)V>D%H7t6Yhb~kN6vpf@oG!#7FE(drPXKHt6X^VY< z#aV&70Ummc&9GO5v+UUnjwtnok)@)oszj;^7l@*u?xP5{}%Dkd1 zD?KpjX)Xi`@|7~_P8O43Ya(bNUcl_7{!&o=A3=1bo`gZ7<3BythhKAAy`(&|W=^o{ zzNZ6S1?}-2O{2_kv9_Iqf|MH+9~jsJB!kHuSfd;m#D{ndQ4k+XvVxoRiX`QQMv%JA zCemI%XwSYK{gC>Wb9qQ7z-^>-LiL|u^~2$I6{{Z#x9EAOTFIp{pwNatOw!LtD2|6S z6jJ15C`Ny$AedT*Q5SB-U;;n~20g7<>%xEsWTs>X^y)F9Zup=d0XYpDbhO-bJIv7T zw&ldF;$%VbP#B!BL<))}zQ7VCDE>g{pajKM21k^-b!4gN!>UBeRQ`by=<8~83H9{} zrLWD8sIRH5MVC2yK2)|@u{6FFVwdtt%x)4D3nDp_A8W>2gH-0P2VPXle6zl$1dE9S zf^E(B0WpZ5`@c#2S451r9Gz~}yH7Z3V&c37Rzts$%2+6h(h6f~TEY9^?cbrd-G3?t z|H;!Sc&ZvGc!(T1K~owZa}{Xj94H(h)NfWa1vqxTY;RXwA$@DNO&%V*b$*_D>>W>^UNx~nE^UMTWm z>}0@Hp_Xont_RcQLG9$DNq-RLL84+2;OBy#&#^EiN<+7zUXR~Mtk0(AR#Z6SBr0S% zYVLDMa^r_-?s2am3aoecAnUzM(5Lmb4Shw?pzKUJUu|4OO~}=^A!@ufyZ`Uh<1x-3 ziRy}a&05rNjuA^DQs73`I;6NZicUZ+|L_orJFS-IQw(7A**xuh@f>!QA(c#ub*&h%!+)FH@rM_vul-vfxUD_BG^&r>T16F8lM*rVrggQ)UUqPgup`((Pz;P1a!#n!jog+FL z9byKR+;&39&L{K!oMdry*RAdAEF8F4QY{sy% zkO#$zWsozb5{AT5kH`iMZ+M3=jmTNuw@^@YO8zq&>p*K}MWwkU1c97uHWph|=l8+1 z$ib`MY^=p24kAhT&*bdo%84?61gzqI8JNIFL`Gs6ZD}c8xZ^EmX^6Tp` zmBKVBGTjBG1t~Cjjz1^55kf%pCMqJN`Q#_qtJ$#aVDQsfgo z3ZaqX2cln|fGCjZW;Dm-9Tlv-a$mseSt z=Rv(xJ0|9UA7Scb7&k0iuZA#3KIEK&A^R?rU60E8?P~m_*B7`N?*paek{o`Ae3%AO zAw0!kSS}|2LoO8`(Zgg>|^?f!j%ZR zPKgseJ{A;pI=oE%Gf0kWmXiM!e%24*2fP6PVI0|HkX3xBMZ%PtmI_`*U;~@>}F{neUnu^Ltm!UYk{4?z4}di#j88_i7r@^ z+G`V%JNGRdyJkIGl$lAvaZoVwoCxfVK1WKVDOfbhid%SsA1&Ek+%{f z2xW@aW);d3t;7W4e4-lIP$ME(I39o_o1P)-o-yK(b;D;n-g0*&M{C=)Eo5p=VL@UH z{+hv>Y|dEaGrSxu3}pshhCix#($|(SwhS8@_1I(N_^68_?;!kx=4{XEWB&{}rpJ~s zWjdVRdhCkP2v+17$F36BK+kczL8++7(_`l$r*W)IkBx%0WE{KEtnlfvtulO@9{U7} z8OOe)$38^OXe+1?nYUeF8zCSOfs?~xNX(h za=Na^zdZ^CXM3PpS}+%vV9j;Dg@=EmJGUMvp_>Oz0b* zInOJ)tfgAVTiK$~hn2z>pPSLMz4YD9^R;AVaAfO{d4>}uc6Ow^EpY84TRN`Ar+?go1!dR zvWxu#;2retG;jqQ!0fXuE7+r#%LXn6*a?OVJPDw(0ZiTw9m$j}RHbWMP>~$}d1oVr#p@PC+J9#meZHP5YaJ-iad~? zoL4EAi?J#j;4LSSRTOmW%d}ctEizr1^7@0t>|$g6*p8>;SyQ~&C^XM&Y{8UJs!0H= zY>U`(WIsR~=<2eyt`6HHwsq_u71(BUj<+f`F~cVi>21lBSQ-lcih4-1Y6q*0#A=O6(j(Wk-cJntE+J)LO3rkmE32OJ>E3b199lZ6>M=B-&2HrZ!mkn?i&bvMIF;0wM6 z#_{QERsqVGUSDNRl|w}a|(gRd>W8B`LSohe?7zGU8* z4;k-;H(_la*-;VNrCSgjPH5MHC(+>KicHyJEEi~|bE*@aNwp9F_vAy?pM^=iPrv^r zGW|WiAR3OHOD5rPZq(zGF%~KRXXMywX$pH%e~w5p6vSt5TADHEm4mDB+=!=n zt5hV@05w9Fm_(F0BiFh|6M$h`=Gj=Qp*(5y#kRI&p0CG_vDj=#i5y@u+LgxRcK!Yk z_|h58%*_Z6#UtEjLvVPD7s)e#!_?Q!$H=H;$OnHzbQ~M?i;(`{f6CzKUo=16j#Ry@ z)BY}EC@)3~{E~u^1Ao|YB%7@x^S^b?i2Qo|JDl1ocQu_4lrDE+nc<0*j>zIBG5c-& zVicU3=9sr&Z*`jJHWE=_k-Y=}3GOyMzVoPJo_qY%MTaSC1^|o|q%#0`hOA`}z_;dO zzmXTK(D%<91n~PCPXe$We}htJ2$26owvs@$^tMr4HG>N+)Uhu^YywHz1^~OT74slG z(Q7XKQ4n_E4ICiNeTYwvHoX>9@Hb7uofWxxgDZ0I2htyb+lHN8g0}i`v?50p}ZuOSMVh?1oGsXrtO8IDpVG%VaHD7OA zkr6zq$FqQEgxw7Hf@Ki)Fr262M-9m{dPtrz4DUmJV*_O4WWF`y4bxelZY)>zXu+eA zZ^44i!8~^&Z9ld8dr-`nuditbyNJg5;-Er+b@K_ik5wTC8e!1YIj1xSL|6~R~?73~@PDWo7u#~CEb@xwfrRh@`RuRY3Dk$5w5 zr`nO{{FdOVEh@8>G?Mc2jy)#zz^-RhgG2%Jl@FR+FjC%F=3lftswqEUd~* z2XQz){3#4Vv)xSo|GZV5F?n{TzV>6_OssCgbP^DaGYe=sQAT>rCGqxNVA3J&+u9foIPz@4b5YBd-)O;wM!a|b}DeK{~qnFr%K^(8gG zKy%Wyn3j8K*_QE)}R?9$)j`K&cf7J_E$N?D3Ez zDm0IMhL!hcLYd1hr>8KMq}+Opk0+Io)KLd`<-}0_6`*1jZ0Yy&(2KNvK6+TDS4Uu%Swj)7GI(riZ zm9*2`b`3?I3}@IC1K~0DdgbxH zPoILW(AwE(J#B4_Kfsw7ret4%SOtn2@xVLgU-xwuwx@>pZ`1zQTKHch@V~Bv{}oHV z2Ph3cC+C*?5rq3kkKHc=WA(M$8R+-uYcb_@nPv>X!Dr~ku{<|o(>#4NkuRBddErkw z5M3O6F>;-ixxC|z4D0Lkdy8MQfWGdR$`>wFTr=W?Nk^-`ZmLILcgtvD(#0xjRti~n z+GqP)SUoQLUT8{5e^&nTpyy|7GHPLD-+*lLzoU@Zvo;|!kg>ai23 z1r}otRn$hT0FWG5zj;%h$ix|Q%!xMWv1()&1Qk(#z&B{8Vy{3vso=kPL9Uln(y^=$eaj>DzyT!TbDdL+&pMd!1FsL^0)Y-i;XooJD61i3RU5kBMkL#kxNfIh)2+sVtcAbJaM>CpH0Ou##fRncYFI9>>hZ(SS46gi zAP7f3J$^ottG2?-JctZO_7wKpzlBcZdC44jBwWw&M{cu$%W*wiVf}K&tCepkpx&Sl z66OB(^RT714u#o%qCEF;yszhvvjS`vBJGJLc+!9viVrLR3#_Siq1N?C>bI}Pj|%w_ zQi92mCvv-b7RZLXt#YAW~K6%Xe_oScUs#mN*rhl`VJ#@z0wUx55=zzG!l zgA70loR37pXBfB7%7gq*b9)YQklVrD+$rI5xI7Um(B)gctC^8S{qTh+Le(m=N=4SH z$U3SNwt`mq^e}Y@3;)l!J7JJ*T_JQcT*_8F=~fUm(28PihqJ-d*bNEpCL3RZUYXNE z4C*o{nVa`(khwp^n1?a9WNF3X;+Ytmk_?T2WOOhRAz23(ZotY;>%OOL+-syvcFD(H+SRzydKo$+MGdq39W7G9r(>-Z~- zp2(V+4SIruP%{Lnqi3Ex!T4d0N{?Y71kw5C)M6nQg>p1?zDW9iE|gQL9Hxgu=G2gr=6F6|9!Rdj zh81&a>G0&XbTWFgBGa7eWdl6>#j3xZPMn6NPxq9piC6-Ka#o}1v^*hWe;=%ZU6%0( zKqm|?Bw7YN(ZcY{@Jjg4g;9WTVY~P>Ee2uAlR?g&cN~%%*W%Ib70^8Tx^Yj!;jRBh zqARutQK`L%G!hv&If>(53&o5+`&vXx`(AI$uvTbT!)kG_-++p3A5xU%`ULfrz|Q?j zxVj_}ryguo&ou+5R-t*gpXJikO_?)b+(mTa$Nu;yF$Bq9_IEypi8|`+R|n{Ee~VQr z4-aKhX(6{4Prt+}jzR)%$**i7Tjr?!81g)#*o9qN`DT+(U?%!GoXmlG#4Sc|vko8)BMlngM02{{mwsi;3I_m@z%X!>$ItDD|Zxx7HC0OZDaaGoo?ImNE+s0cHn~zOz{0r7D`u&dM!Pj_6bHBmiIC*AZKK?8}HIv_`Q8?0tZ-x9xm6 zgmPcx*Mu0sbQPN7<~_DG8MriW%6ys{di7C>^MG*zj-u83T>#nYPHipc3UC%(!S_*P z{_Nm8tquDc=N;w-gjIYdUSa;pqAO)s zb>n=J1=iP@fG3OcDb*T>`sMQ+fE7fp1|}6;6fWa?WIaW)NO`e(Rd<{3+I;==oUI8R_|M`knt#^t>5u z{m<#S4z>JWL(jAF=;`@;>G^xSpo{|GA4|{qkk9n3l*+lxx4^*=(C35vlW*f*F%mS~ zZHP?^xW|7j^?`?3$Y!(PnoW!Jr&S5KHGa&g&_@^RWv*Cz*t9pC$v9ZhlVk9S)OmBP>Yjgen_><@o7FgJuO7sAdxo~&#dWIn3KaD4JljxRG z&8dnlP;SK9qd&s}7i8o%N6P;jqK*DOaY&E#AZYTU8EbWaUtiymt_fSNXvV+DTQusj ze$w0wL0#HmP0i3tyIk$YYwo}yYmU7LP_2VXf^r=_zK|~K zn#|uwB_ZWF{P5T=U>qIL3sOzsb?fRkq~7R|isG156s23BSFw-+WUR=-MP5`1+*XrT z3C&1R7ebohYGGOU^%4S)laR0&d#!oCDOU=oTxCMz)%GE*4Zv;*}612&K04k!@p@k`H%@}0b$ z%6_pz8t^7INhEJMdjQGs!U4^zP#L*=HCow>OBW}oN>8h$5~x6Sgj^lYRH$;a)Kobd zrKQ43ONEt|Dv&9TmO?){_+$yH0w<3@SbKo0=17xVZw&yHa{igqce(P8E+RVRZukCvZ3|%G}x)H6W z^&9N#MR+A0s7qv&y(T@T(q7}f-2r>;8vx3w&^eb?0QHbk$B>1KgSgrVhfI>k#{!u= zZGy`R#Y|u1K{y}cpGKa|5Cqdtvg7(sw&M`-SM9hW+=xi%v;8uV-bFwMR-7c)o&XNh zT+48RYiVe>tU6IPXvy81X4~7**+iLQ+cIUzB@<=R`bm^Y#!Xw~i895vYe_U^ia9v_ zL0IzRfW20x_<6uyD+`gX2JN*n#bg8aTAAY4w7r%nivdkl>O9HSUat+q`9XL5W^MV|h;+ZnVGi8crel1fJ z&uo$M#^DI2`DVHd&q$Yb+tnv^dvDlr@Of~NA}Oi-42^kR4saNEfxz?qsimUlVl z5gZeL?|SsVANN~gBF4S<^7zaz0GQP)B)qX&L9~XeupXqxA4Hgg#RG8#oLzPFj+b*i zEJK2C{}o$ICv3-fBTJkLl#GakPAAYyQDV42=NSz}8DWPqvT+}9B76$blKKf91UwJ~ z|7^A#3QkAJ`KjYS#facP^}}o+CS%J%BM@8){Ev2CC$&<17GtMX8Amb1_YpSwHGS8vN@XcWD@6+8hnuFsqsJY%h(l(VXeiZs;CG@Qt94?7cWD0Tc4I}p zX4YV-h5q{ZVbP_FbtsfNSM@grG2BhC)_CDDSnkqWw&CrJzz&XffbE=T8YYmV7n~Ae zX3ciN^m1=c*E*W(=GO(Wy-NN1y+!Cy}JcDp>m;M0HV+3}I z?S(tEut(b>&WHEL-VgG`sA50Fb0P4PrSJpbNPgR{_2@0{lgu6N5j_*#2&*X(sacU! z4SGg``YkDlQ!tRrP*T7yH+7^3Gsgil;T4#2W58~wIN`>vM_T_kCM~D04{{i$gtrA<&{=Z01w)-DPPhUn|e^|$ltR&S3)|seG`?Etinz@wrP`Jak_#hAC80lR{y}*j zsiDN9q{9iu(`YJ(*Z!g@*i3MQcVsNYsyc5rFksS<~a zvgos^my|w8+qb;`h5IO1`YT7Y;vHN5y)!Ysnok*Un~8X}l&LvlMqE9KRL(xVE?T+RgPRmH4Cx@IAu zlis%mJ*i4Gr>j_)xu!N#u_$2w$hwdhqakKiq-IHkYvmi5teAN~exC+i;prKVcUB(#tg4acNHI7@O+kA&!OP%h5KK6y zkWo0#DNKOUgPVk{_Z-6g_Qm*VZqiH~w}6^r*9s4?f(x%>1#+K&v&=6q(uX~fHsP@1 z58xJIT`ImGL9o!)=pwTryRbj7*^OS5V&DH*!;_a$lj_(1fDL~5G6KN;DjSEl*~4i?8p z^w>nyVf6Otv5(2XhkERK890I4J`ljUTaM{o#+|^(akB~5VX-qm`g5~F+0gaOHlqk& zUxs6Z*podY7yRWDC&XUNezURC@nR}-VJqN&Twi0d2i*z>mgjnjfHG-m*TOSE1iT`S zLq24Sci|PooPfNOsF1|2&8stK;e2H-=7$xvdi*Ltha`Cms7kyeP7q@7k;+|w57Jp$ zu>cc*oWKUNY`&Q53UrGyNLZs!i{zy_W@uZfA3((Bh!Z&JSutN+6xc2*JP9>>L3U@( z3wgpO>m5P{I{K3zLtDs^wg%^Ja54?0_T&ldkr`k?E+~ELb_X}(iZ1u^E5W1NwPWlywK&us zx#?4It113GFU_B5BkZvk03<_4??c9ud8Zj(Qv0jOH^lxOs*i9E5Y$%52^IZQ15-tA zRY=R3qaZ{GnU+30*Aswx442GcdQ(Yfl!A$;~ryT?qA6* z1eY_%slk<>=LKKT?{7r`dBcaCpOSYMWr-%j@MGY7f_Z^CNr6o}68Jy^k7x~E=#;z6 zNtm-eYKA?*cl3%6Ku<_L0@jl!Z;~5(abHG*Con1X`=MYufasIKbZak`PYF(tmQ*Nc z{AGo}$X~F7^P3n)b~>%_Ff?i@IK48JNw8|0aieVIa$ay%31F56j%XhshZi~0GWH&{ zNgVz`^y+bLRTS@vO%68giFhXxP`)(qfk&|B_84R#y7~bLdk+&pnU6REfNV=mb{RKPAlxtgnCuUQFzzw{ z2Yu05a*ob1tE-G-$8ik}cC_Ps|67{KGOImC$gAJ&95E!q!E|4_x?B9-vY4xt?f&HMJ@y|w-OhSwK$Xk)`E;0V68&Q z6O{n6+)+!H`X8Ch5BI=G1c$hA{a=i3cC*1VxdDdEE~H!K{dD-lio(uqf+R-xna}t;}(RQqc7uwU}JyjvIAx&|_Cmpi#E=2a~ zV@=h;L#wI=T?F)-2%M>vM;MVK`nsaIvtdP0UGpG1=x(i&n9*OMUlL)mbJD*9sfW3H z>Q|QMLhWF1bHjN?5_ha+VOMF(xxui1S&w`CE+Ji6v{~%@B0Ft&agX1cr56uiqBy}JtFV23Fac**Z>hore zC)lf3Bq+DVW{MW<1>x>%>8W4yK5|06(nB5@BQ^(i@!q$5KV$?26@@%~z!x!_8{!J0 zEzkpIc1NzDPZ-9iPgQQenGRXdH(bY74p16(C;zQisk>h- zY)w5V4h0~KQthfe%(uMY2Asf;T$P@Uo{b&j#zrqDq@d4fIMEkD6LClvLc`hRCvm$NB z1(fQy4xym(N*zED#Y7@$AcU`JV4(ea>1IdiFKnf5Ly?zpRM4^WKPO8|JAVd(b~8%Q zD+W+-SE=(Iiu8oZu{UyY(Uri4igVbCoUP^Rv8T~HfC7Ne6f5MNO_FPw@6QKiK2BbU zCTw{+<%9)P=QG147-|mr9?$Hz6iZ|g3`q810Eo`y#05{UjK+X`IOhV=@}qsThV)sJ zjZI=0f~Z+w*7!xud{N_Z#E3KS&!bPy1ZNh4tnH5u|3N@XeJ~EEqa+Az?iRtUEcJ(z z?$@6=TfCxf(9bvPvWe5LQND541#JjDt~k=V9TSglpwBqdaHUy3A2$f%!fuE$53rT| zx2H*Ou--32*~xcfP2*NpayPEOh>XL@jObXH6wxlyzllP+DoHm*U)JOmS&^^cfFLNg8x>Hi|3?SJY7_skW7AB7H?V>Ohy-@EoDF``C24-qQ^lLi8Q$g*ZHwhggNIN zsFd(ZPE(c-8UQjDP|~g?MDGXOW%}g*g0{a0B^7@UHLhA=I0EMcAFJjllON)Ovs1N| zzV8e2S$sA?e$_?4jxn8u{t+`RXaiTl#+%ueB${s%GmoDVGrMt<7OoAO4Xi|OaWGN{hR+fB zv>+}4!hnCr(PEI^VNlM%$cJR>Ngm{c32Sf(J$?xaq@E!>75rokY7#sR?VSw7bv({A z(4wQ>obTmH0jcg6h6xHWI~D?xUcyLb;bD-A^PMrXp$dZX0NhF|ad$w=E(|@gS2}Mn zsU{r4mDb(0fR5a#46zzK(ojSBJQHRtrk;`InDlGg0-b?f!9Km>h`fuAx8d>Ig`~#h zE!YUAMLn?4OR2_=M5mcB)=9AHb61Z3q2hok2z8~c@QM|5F+l9|DoDUa=`GP`b2qN^ z4~R1CW=*X@mL2IV@^-|AY@7Q5TaoY^l@R@R`)tGz583OKw+0DPEH%Cjn(YBC!`|&q z-l?n++)ILF`xQh>A5wsOQc*(pSa;qsXczl&# zO3?CLG1tR>_Gq_zlia#YMg8%>-pD5*y}HEl6odsojxhMeLU8=Vw=q-N&fA?=pB3RxF}Xa1=Do)#j`^^Clv8u6bWA=AAnO&j-7gUqpklv?aqRuhWcjua=fK zGMb=;oF#eUs~6+3PjtM*e3Klq7QI&HN*7W17B|(3m*8WVRc9@(O{m?0=IuNrcCqM5 z_9>Q#o`XVCZ%CGk?{*-6Ge&FPmmTkKniSl->Y8}_!q(_Dgyp>syzlcSpHWpro(mk; zW4WpTykY%cc>x+_Z={RaA(_#4CDQ@=U%Um-uUGwp{DJpK%^FHgcxeSPJcbOoCl?}c zkee>VsjnQD9^XI!^rQ#bD)~x}(?LYh!p)HD@#l){ahOY4{AuRuM-ohOe2FEep$?eN z5xY$69S4VP1&7ttYF&Yjz>A8*I>;oF!?0C=9M%KNbr^@;Lh1q9AMNC_<3iHLEJA=2 zzUWL8=eHP3IVTL)ftqS+la`|W=w_v*KZV?++|JaRH2n?mN92!?0`g*PtgZD+l7qYg z|J>-*@q^UU*spmCcJtck2-n0RKal?@PKrw6{Qyy^HA9#UTfp0+3t@GUs_+R{q)UUY zsUUb{C4DP}v^Sy>+1(H-$rqIsjPqRRc;E<*W}pa|Y^&%?ZI|+b1t64$qPqj~E!BpO zw5rn42W@`kWdQ#Y`@lSnkx!u~gYxqL(CoON&AY4M3V;tg8>D-eoDoDL7>YFBx|5$$ zRY!i0{-X<EU$7BQ&tT8J-@~->+h$E}^U6=+wz`Li zrcFQ-FqVor`~&%hv&Mj5^lSFr7&YuUY@H`<4gwO8T08(niUXrNRb3SY>d$^qCaI1h*K=KKC8 z_}+?1;~;#&JT#frTC@XcaMMSJ@5fY^)qb159lqzk>A-itVw=ASzBv#CaQWylN~Zz& z&lj`2iVBS~2?DGLXGLjZn&p_$MjBx7SoaM`<;CR2X#9ZW#>gzC=JJE7Rj|#YS5c16 z^N2A@%ay6lMP>!|V4uqEB%0k{`2&b171?zPWq19bF{tNA77$295d0rtnuo5zs8L2# zPx3uQ<$8Pt2nq3n>VPjGDs^OU$b6pkL?4R7uT}$`;}h_Xse5`df!)|-!_r{5Br?b3 zihcBpQZ7e|6z^UjzY7QgTYwHxNX6bGct}}Ae#x+kaXrbM9q2J%a3v~}!y!BdOlL*~ z!=Xq@HWK-cS%XzAWl`J>WfxtP2J32b1@+k{gC|yAE%g~T;N^<@Josi~Hw>cW+lm+? z6#*6`5Y?!1Wl6`wn83$0v*1F{TQNHq6+t36Nc%J(79jB+svyj)PMW-w#}HcbfsC!SV$uhEN>;y*+f-FDU?!R`ypX@0W? z+gBrBCES1iPYUipBK=i7EgET3>~L`Bei6<|gnX`Mq%HM}>O9d@ln50dD|T4Rt!)Df zBlLa1B9OiheBW}Kzi@{-JsXxMX`S^;aNgG>J%-hJ+pm(&K%a8tsi)MjrJvz@uo3_( z%?JFgXp26?*WgeyWAfFxEqn`NoPFM=D=`MguCP`n=_gSk`zG1HUXMLGX0YfYETI)y zKPVUlp8|dOG{}oU^0=!d4-WYc5X@iCs*L2>M(=t0+KmWfpZC)B_)_JGa~f}s%l_hy zRh&=+=hO=u&OmFfyt$;-j|<0KJNIdujpOI&YxkmqM8~Jln9TYrvKpJRc)7)3Rw7v7 zW0T^Lv2T2bJ!%woQQ!-^XBlsd$Jd694h_4&jRWI4-Whit{Tw1ZUrbvdYUb!`THFKU z0vwiNwu4r36Ru0q<@Nk=#;~RYP!=a3bL%CX?W0ITzyI88yfJ3yJN)G4+8-f`ef>hZ zucsLnvNnTPne{oqdSF=A+>?f797oofPS!6E&ze0P0y67WPS$S>&1!7Q9iCP6=<8m` zmn>niV)Bk{w7Z#Ikp*B-GZF@JHKUbd7bn(ZhSG07D~U*4B$mLlwNeU>Rss%-5nRm5 z&H&&}WHf$^WBd|HCyixe(@9uXs5ACyUGIoPbj9}=``q#p*Jn}A;3ck~1DVK$t)~%_ zaGyie@JH-24!Aqs$&fofF&{mFSwJpma5CsmU;6_3Akjsxw5PJy60<(MO8eI6$9=&G zyuqN$HE*aA8_XMOLCXAI4bJOH-Mw=koahsJtV~01({SHu24-uxto{Z#*1LmybfXoZ z!-wN=)k&(7jUhJ|VyZ~Q=Yc#nd3WyT-S&B!`fTpb{aCY^aLDpKrng;!kB+0xTQXYk zsY<==)nH0rQ;hl`Q=fuCR*z12fR=A@q%d?J@zZ4s3nZ2zeNm*Xs4{P3kMmLn>_vRP zFQ0U;uaPTZ4xdBYh`LN<&lhz(JYR2qSK-c0aEKKiv9uUlUKW*@p}b&ue#2PNIgy_{ zo0adhPvL>~lY6qzs#9qw6Nv=_Z&`TDPruPsTAzMt;*O(Sb7`@O23&RuGt4y8BwTdG z?R;lFA9fe#o<}d!*Dm249fQMaHNFer+*S@+5*>~Cq^9L*+9q?IL`~+jMcQV3^$9)j zTQ_Jp1hVddv7rt~o&94ZsklKJa8)i^C~BuIUG@_Qr^YLZeMJxLTH$Ve-6O8+S)vy= z@z1$=>2g~VXn2tv2jpBLR0}G^w)0w1S8r9g2W46++Jf-#QQj13q#J2K*J&!bAWW#c;_Lg)K?ran>(MLpmiu zeF_f?F{=BgPn2Ny(L2-iddPx!E8J!luql9~#~=vRU- zi5HQjUN1iqd|j`24{J(t<(d9CfEft$Cp+MjU^So>KfH4FW?d+7Fz}vJ>jKmYrTnWi zb*Llyu-KG_?{nxH^gH@r%(xecd)?kw6$xBKfsfckagxIbz#{L+C|` zppT?@=Ue#RV4me^)!V%IZ~(qU8`4^k*~)Zdi-EC(@aq+OQ&nisk$2#a;t?`W9MyIq zy=1~6r^d{O^|p&CKymjOKP~IGa)K0i7ZG;t(O;hdcFsM+6nM8)Q9h^Q%Ad&|=LYud zd`DD=5X>itG}MPMPb}ve^$>_Hxb|NIA`8}2@F(2-wZDJ~W$Q0Ay9l%ds8hs&@j|Cy zyl)|g!yjkpB01?xq+c3eRzpVcgJpTG_GfUe-2u`F0BNrTKhTW}kOQNC?F>~%pCjGa z6Dbx+FrZuU63C+<;i8FEctBcO@GCupdE^=DVHcN!Q0xm(lY-wK`yk*D*drxehrX^8 zkPL@NGr9PbCmK^t$Oh~JRL>-E(Hm%Y5NhLL)v3$_Hk0i}=GKH88pE}oKlaUNS!N1V zg?hwv8&C%&38nB}TN_A{_?=z#T0D%z*( zZQEm5)~k#x55BehR_Oa@rB+T|26-S={;e7+h04EJsr)}_uLoalz@#+#dKx35WT*xY zpx3M$dw){Th&^@*X6zy%@zCYi9r*MDEe|am+WC$$P^z&Jj$h)rp-vho#ZE@?sxnc0 zFj4S9+|M~C$`ss;0LwtyDdIKV;6W9z?n|j@rz1&9h2qoMDbhwkW(|KZOzg zGCe|2#7I*m1W3w(uBbL|t3!v1Q_UdZ5@Oa7PTlC3z7A3;EuM;piKi-mXu?5!!LO}Ls(}3lOt{>pMr6= zae1Ab2LlvvahY}V6QM;6p~6ac-2#m32&S@m1SPgh73*srqBV#Mk>r)9=Bz4nd966O z^G_fPTbppy%J~|ux#kD*{Q9~ENZ(h3dzO`^8Y#a)yuU?{FvZcVlPOr?VDHX1#lfNV zr0YmY+&_0lXp}-AvSUu4(1X+i3ynU#@fsy^cD`%YEFxN_!5)j$EHxYE6N%_*rMqDP z9>v(Mk`0xILRgpnF_os#cdj1Gf(d9fjDe87+Ma{~IQ)M)x>lkVrw0GJsI^EZ*1Wcz29BYZ2c4+AbhMUAT1<(NpQZ zX#s9Y&qJ_SU(4^ISh!=R%3o?_-o*SJZ(P=4kEfLQT=1Y?@uJZ;T3^fayFj$jnE_J^ zc_GGXN#$_8_#shpD#byRSh^H(wULSJ23}_^1w#GCF?Zx*r}i3>+~{y`@9otT$s>aOY83l>dy}(M6dm6nzqp* z$dkv}kGV>((Rn{$H&U<3eWf!gFY>W9Eb~HGLukAoo2P;=w#@2}zKdlfpaT7*O-xJ| z18$tGU5{0Fd>j-w;Xq+M(6quR0Pxzt>j3l|Oxf|S9ma2MB&e^8_&+BOcD#`_R$^Iu zl>~0(Oe@?ficElKGGMXneN<74ggM$FnA4SA58Dm{}FX!!V0h6LnJR#?#v`$3p4Y3^_?tmmEQuISay>>IAcEwDC+ z_?hgNu(Iwrn51$4EmXux04q*9X)j^MiRmW%6i|iEsd2CpO|>dKIlJe)k}G6f&EaiB z)p&Z6JFchfiwz3UJB2Zvk6gqlKBJ3sB=E|>lU6Od z5mf^E^5HN`J2&JEb|kz&_9HwWz2*3=((qE*qmb;89=nr+9B6awDFoR16mkIc*r-X- zL2?8s;4^?ZH`$Ac_<{S1u=wbl*Nx=Kt5(5uHGZryUcx4^J4=8ucJM4MJq~br;~bar znZ7T#n9*Ol`t1jhgdRQ4M<@q^lK^$zsVU(rA!yS%JUBdb95LAgF?5YoG9#_E^ei1; zwiKHuKIQ)xRBOfDTmwcbE_^Uo<>6Zni%LMtRpNE+MYFOB!D17anL#+3O$B%>F_#wM ztw=V znjG&)^5c+;EKeMjVCfn!)wB_{R{}fH;Cu)KKM=b>Y`~=n0mxZxFS68Pt1G5dEB(av z9OJ~e#w(D~D{Q@OHe^dh2IiI1z3|b(iMw6f%-n2-C^{lJovm5 zX09Wvj&48?JuMZQRl&I+ol;prJR8O#l#P&Azkd=r7$NbNuwmdoj)w5HwZQg{{q8`Q zv`ul#4q!VTt+BQVhs>vBE^D49ZqEdbW@EQ!j}vLMkKztEv=iu+-e{g_04a&;Vo_PL zdLzk9x=mqUphr28&%nwErj}o#KncedAgR#}uAt414NMJ`eW0NjJbJh#J z0r>jXrp7O9eG)K~4v!9L8Uj$=(yq|9BZKrka=vg&8UascMPAU?y=LswfpW}cy3rdt zJkXJwHDODn!m4>*UmJwQX`n-zctLbX$n4x7*h60e7<2-U=HcmvbqTY*%D+^a?w*PC zF1&+pJgvDIoy8uR4MB*FhVuv%v$-8BDAZPq)rtVt+4cD2YEb?_w;S||+&TK1E5Q2@ zvmUhI2SMgoUnL<%Fz!ky823srQI)?5E}oVC`aqZE)8Wo26|bO3lX%wO44?;&AuSiX zbZY%8S(DK@3hI?Xzy5H{A43*IO?*UV){Y@9qCec}eMF@khgr}WQ!jd~il#TJ4s4qU z(T~4U?bz8UVC;vja19d0t7t5za0l)XBy4bTH69Uk-UFQ1W9TbQPpc^XI!q&NGKw#I z8)*@Yh__Ucdg?I*u{ZFNwk7y{WIRb5C-GaRYP29KGmQR>mZ=%if^fG?acgsA8G?E# z+ePy7N$8(P`QK#ecDM1a+vs$+Ozp#af6G*uyI$6FR^wiPMDBz~5nRoPE%H!qG*lqp zJuuaBGFobI{o$t}aiqx-&alE{Y>)jjWW;&){kf6JM5l5a*!-jxib}zNf^FfG1w*$Z z80;G$$KelCG8K-Pr{I896-ni^5EXI0GLZiL;pydU2r%WC#TJfUp4USS9^5H_0a$e$ zHOSh-k={%L2oDf`o!h$E-EynDaVK{35i6(xr}RL0$f7cP^!QB>HN*!-J*uT*lvOcG zj(Q!`G^nyjH>wn+)&;sJ;(d@>8)?a)AOKoVY86L8q~ZZdTIg^kc!cyC34nw_sQfF1 zOjG2ALURJ!5S0tOG{I^G*(zeii~cZZC$J5b)LFG>jlvpVvkQwkT_jadv!Un|Aw718 zokLv{(E$D&G99~366woG6nhCg5b3)a4v%#FB?FLHDd8FOx1eUgvS|pZD(+Zjqu@%Q zMdombM^US`?Qfu0RGQ-kQXqc;#6x852PB)JyF~#Iq1Y1O*MU8_Mw)uK2?g@BEod}X z+aBx?TQFLq-4jfpqec3|?PEKQe(+~|3^)By$RK+p&`1XbE!BB4T6LN`KJk{xDbV1fl1YyTSaLGqvddAcM4kfBoV z8da{6@(nH5N?KB4&qLa=W>DL&M7QffQW5->4pI(*3A#}c6m{0@QJm<2r~tpQT@I~u z>9Hq?XjDIO2&Itz&L%}sq^(5;u~$-xm8qsbJorYo8!py{(ux#owja!500Wxc4A&k* z9-Hn+3^hdf*mVD+agUXmEi0UZLl~T@WJ5Ftx3pXmJt(n&XxsN!v!-@hCE2VEWtv!> ztjbF%3o>dsEBY=gvsXaw3`&*e;ZmiCjzq51bfbbI`#iSMg(8SaNtCg$k zT%4qrlr|n7nd%|85+p*o>aAEkO85|1j;gK})l~_pP{B~HMDs?dR+u)}+vj{*Hof09 z-M@c9HrYQt_H72)$2AlyR$wz_kRVq z*!kj^lbV=Skope5bYwTyhBAS9$3Mp1E&Q6ZUC6lQF7 zG$Oag@H%x~PsYNHcn;kLqsK00jI$L+odm~}X^wP~-j8wm{X2U6Wk`yIvwtVO&6ArBx$Rz(V)~mM&SX{1Q=8@99(%dM zpPcWON`Fi)QOEO$5_LGgOw{E8btH45?#dCU+l!Pz)Zq{kcaEJJb$>#l0_Pz55;$_o zG9kY%AEyu)XTnb+Tp)|1EGzj32{<{W$B)9ohBF~R2Mp5);Du%22eonP83pR67Piiw z1?7|pX^*2Ykz3SPyr;#tHhsc4nzd?**;HZ`1&zMk#?LrYAXs;AX_w=ZMq+8n&iz_- zabY{ouq8r6CA5qhx?Yv~^^I52J>VM@9l$aEs2Vn049Kz@}L+56!B@ltRiX+4_?Xd z{h9ghCPBQv-|v5ayk2By<~t8(&YU@O=FFKhoqKYEo8xzdAD}0Co??7i_fU+`Fm;0* zig6?-OS+?H*!e1b2thH2BUykx7 zR?+8$JUnUe-QrDlanpm*t{mGLh*8Fj#qN3;OnEYwB4o{_f~Qc6%%yfSCdORqrvwI= zOR))!?$>jsrS6N~H^hL3Nuqc(*L&6MzrfpDvS#ZJP%hA}KifD#_hjH|?2Xm^nYtHs zb=52Lj6d)no=8VfNW1T+hOZRlR{^;}kxXxD&Yh@de1W7H3^_ra_uA4s{zP1rMrm{rt6>hVG^q_mLhKlE072Vm?Y;)Dm zjL&TBKcOm>7E!uF&LqFknFz&?0TL9@ZJ}k}RqEws*Z^Rhc@#mqG{rq=C$<&NknZ>X zAY@T*`z^J3;};GkLd%X<<$6^){~7pJse91f)Vmhjmg@ms$H%o0b^~TAXVtDTOKPi$DuY z9Sb6&-3-I!eN2+Boann!1a=0u0r>1Myu59nseYQO|FN@b1O_wL*;X=5WL3SdCg%SU zkV>6Z(y4m*xA_~#!(E2vb)-fG*-JHeq8uSYc=3J)@f&*4`m9BhW$jU>7Mc3B%Mx7u zWumVUX@EzjoR*)HxqBEq#g;eg+W^fYu4@+91wgfC^e;48hKjgR#|Rbf6(NI)5_eo) z{E}k#o0abTYHXc~*|S$VvBw1ti%g+&yX>W-hdy`HXn$gboY=qWtG{-k(;lnEWF}W< zq}{VuWH6!L+FU?~{)D@QGP286lYT(&)MET7Mo(in;@>MP*;n;}GiiG;>25Lb$u%iX ze8F1D2jDG~JmWF)DY^-dKPoe|jH!aWh7ztCP1QBIB|QfFlL`PLS&LOXE9wJ) z?UFLCEV?)pjGtnkkgUm`R2@CSB7Ds#@N;Ce)AB6>PvCzn;47Jfn}>hsPAcWWN6V3< z_Cs?!6|M_hHRfcADO1-qVCW1zu=veCTO|7-Y#gkJ3+E`lT}>U!gjsTL+6$@-dyUsX zBavZZM($iSSlnB4LYC9=Hq){@fVzv-F1=)?<_zQ)H8tW9-PzzXpkX{pTclJ}bvqNg zIXs=T7UEmWc^xo;qa5lkD|waE*idk{kTw5LCcyr z>Ce#P_s2Q5Kl!FVA3CeHY1i;U=e`_E#jFZ>z3Z|7tL2MYNm%LAo$DSd(X+g_cO81Z z4`d#177-&)e;%&YUBe$Tba)rDew&YUKVEaanW7VB^V68kDOZX^KpAH?FfZzz=x?g_l5P+v$I?#3a7zevCjI$0zzMs#9JSr6cp+fyT&%zApCy3XSmt0wfX zr_WNespU4qBl~MvQ?-8nMt76DrAZq%$GPnnP^$@JKJg}e(u6UfD5VwNpM&jfoL8=9 zN7!b&+|8DPzLaius%dtwmhl&>I$6dKP=BYpZ`;0-E-^iKb9Dc(=$^&Vj**@FhS5D_ z3vgR2q=_Vh8&PY^;PpD^_CqY`P8;eVtZ&2DyHZ{jN7qymnVrbLv~%z0JNKP|R;tvQ z$RG6p%Yo?tMm_cD`o!bW8=>{aWeXLMJX^U~Xmfc(kLdMU^r*e|(z$pzMAQ(3%92gm zMRPe7YzSYkcu4UG&R*4s!Z$VN`Yo^|jF+DAI+dqC_3rrVi8dJLr%z2>I9tex z>}LqKgJvqb^SD8)A;C zI=vCmy=VA)^3IUGGEq0%oqin*x89vH%ej3nQ#5*n4ZycGSD|!>)(YCzTB$pLv?Grb zh58tuIZIOpX@Tnox4oMYgm?&c{$;}D3)I5?0FjYQNDo&Bw!JQzdj|fsyZ!v0?VzmK*67jtg z6K?S_>Mp}dv?7RCkk%|c&0qR$uxb|#lG z=R^b>?O+{uhx1iG&#!Hstn~IKadAOr7c|1pv&`nt z$#5rICN@s&l-3W}HAxpgVApisxB@5E%)A&#%Te}*LZP*FAXEW7m4>>#&i4nQcensF z^n#Nc%zibf+Tq2aCBvpT9sF!;FJKa>o3reg92eU&{XCU6&vCI`;pfS>d5*<4bS@BQ zVK6kakg3bqVASydAY#;UFP$A|)UgNiE0bMsyz;sL1E^(gvU*d^PCPLQi4uH3^L3g5 z19r$Tk&zZ3wIaRSY~PP%B<}9sHCd6-y8CekXmVnEL7H0hS1y00M~BNC=tE`2gRXYU zmOjyv$MamBov-QHZl`TSkQ0@Idv)frB^lh@nGCsWI`Bg-FldLpZAo|VS*Epl6RzcTd-es} z)eJ7~?M6>s189hL5K*A{A1sVU$az@FR%z&CUI7F zU-jmE^*s3byt4&>kx-@;a1FW0S+x(YQ($yekrUz<*PK^hG;g>r<4mk+#T)0l&Ff7Q zR6>OfRA_wtS@H8eVIRI;@@jB5_-rwUbCw^dP^K4T3-orgZvGMI1m*jP)5n2w=zk9) z@5}li7XKfEcpexOc;MdboQ+O=0Ehu*IIv|ov7ZBz5g5`}7#m1P)CC93_sjbR&-bTU zUPQ1i-AdGDAv5@_0S%C>X(Tkjs-3p+1uTE1POO9~eR9>($5gxkg0+%EmXRF3iOJR= z`5j3(BmrG-w~G}SvGb1r?W~%P=o#(GNqn5wHsYgUMbqgC z5K5#m+06QH_+orUk$X)IyQggT%6tTGr)30dg1ff7*UXf(?5(bJXHjp!dj_qd3atVs~Uo)4jy+iZ}?(}{_l+=~7s|G{; z+ZuEK21%Y-5IM2)8IMoxD?3*6}lSop6Wl0Ja&iqOKvZEKck;mfNj#I z9r?G^YtY()*(Q-3Hx$N{mDB6w$-iQtCKUVIX&#;S@+l~M`AOd2Dd+RAviQ^r<_(_m zAheM9%u6r?naa&8Q_&r2LhWs0{)0ZRM_he(I?3BW)XYqC7sXx_c^8)@W<2;%##^$u z!QF`EXNCKm_?I(@jh{AuB`>>|)(HGWW60PoL_0%OoalFAnIP+h&KM3GF9dgxNf{^m zI)DB;QFq5N<}~#N2k3URzq+-yMA%gmrFKQ?a-u(d_{II zM}h!Z-}!i*0LnfK@Tju0P&*0E|a{ z+pE}W(Pm~%{}z&rWhB-@^kn5_06|`3{KrO11$vMNJB1s;F&2K_ySBz%Y4ne=e}Reh zS9i%EDbOyYYu~0yD%tj~*-RF*nZ&MeoY`ADY~@PXnq4}V>KnXYi4X^DkYdMKmm^d+ z@Xk>#gm_S>*dw{+D&Z%BA#Sqi z+U^7NNG7QWSbPEeeZjj3!xfqgO!EF|beJ!CyvCn+9(ZmK-bX3HiTb zuRDN4{Cg(KOI7#DmY0f+M&A1l6eSg|@f?b^e7_>pC_zO5_3pTu-nB(|IuW>!geAxW-&pne+M)mj~Oqt#KPpRP~j-*=3D8lATE)2Ni^;oixK4b?W52CSmy zRdjWRe@yo^(;T{_HPem0X4=S+8O`+UftqP5M>9SDFM?QFY2EO+PC98}vO$v?2es0; zUZ-$ur=e9l`NyH7{AakAcV8O6(Edx_D_UqXOk|HWsqy!IcGmy(b#gG2=_%G-)6lVQ z;FZ7{6Z5YGvb$pL{Rfk`T|w_$hPuE0smGbbW0XVO8$#1mW2Eq9WJc;f)=?hQ_ST|K zNslp03QoxE82jU^gTXvf7NtkMfXL!wM*U*d#i-L0Zv$ft=W}A`4dQv{9Ea!qO$1X2UI8dI*e{W2)RhCF-+{uJo&H820)Iwdb8jP+b2v_>`hlJ{9{)I$7NI48y)3 zRDwJ#%YkTsveerI4H9A-sklKqq17zH5XKuqU)CU znrGHKh>(ZL)KxOMyZaZd?f{3W zK_~;YIwM}C_{Rd@+?aVl4cE(3q(bX-$gMY;Gfv9fNtL=d8t_^e$p5=(zrT()CKh;= z@K``E&@7YeU+WE*n8_TV-cM~$+9^dl#R*I{yI7{q;LpN1^{9X#K?)AJ2nZ|4*v)Hc zriwIUF$Wb~CI9j(7AsN?%O;k`K*CZ7cS;G`a)3exXZ2w<<)3c26Z1a{sMpV@I*Uvo zaVL~fx|GbO*)v6xm@9m)Bf2Lm+A-W63IGr67J`vo7nl(?8NK%Mi0kfd7nV3Fw zOmnZ8<6hB_xMEKCID173CP4L#^fRBCliPnyiWlkAEMX1X(KJi=h2NY0(GDJ?!z%$E<1~E_eJ3^+k03n-&TR@c5|qB)SYSNDNd~@>CV1YXLr_#JRZZh@hSC}m7HFrjlqn( zX#HtP15*Rt*Gm&(E?3@y&8ZWcDvmM9Opu2_RrG=pPD}y#1dAhw-ocNws-CNC|NCR_ zKZz`bLit&UHq?9Rqm zjJs;ly~bDAp6HQb?u1HrYPECQ>11*{6So}d^tgmG3^6m`x$O-)+1d~uleqB!+If#F z!^520{zhVSpN?QC&exM~8cOa{$~!vW%P!x5aZ34CRr*Tz1fyt56*jGGmuOqE9-A;! z(Le2ApTpzaU#>bb?<_?9{CtkfWTH@sE>Lge#&$+FS^mGl+4!CtWPRmE+=jG4%lziXqoo^Y^ zvNdBVBFTU^bUBLCk6jPzWH*NRvy#7wJB<2Xz3ULQ$tRWwlN9D4d`#jOZ*!Tui^6#>0{4H*E?n)c{`|@_0fBEm{iEu|le=^4!Dq_8%P-Oiv-A0cuUUfjh zMQF*f9w4asH_+2zd`7WrogK3Cj{Q}crOHo|LC!)SAi%+cJRj&yZ?Sk6cLLcm=r-WsHqsf)^NY;nHvh4E_?zV|);&ly) zgb1f<{k*C1x;ZR11tse{4`t!CFt$t|-0^dGRAfrnbV^)u+a7vuRuC2#ICS#IE2u|| zk=v#2_zDPTYR125;xDTKr|Q7`hfJ-RIvaQ?dT>gkw-7pTR)t2lhMWOlIm<*ssZ~zf z=tr<&bL>0DF*$lqZDEwm6!3lr$(U2cTY`z^U~5+Ub2Mw-4A1PpMn}7`O2~>Pv7xx+ zsFz9;nQ^aWIp{B-y9G0?Rv3=)ZGf$ak&P2MxHdF_i*hw&z)bt%xs^ zqA)&!eMR)J6Ui&z89iJO$qV-Iwz1JqUs)6ENqrE%PsWI2P2^4Z4>Q9)3^KjELn6Vt zCD=CKuYp?~euSUy+E5KY_+tx24;9^b0FmHSW73Ged5 z7ZYCVhZ_hV^1~Mq);W>dswdp#hbI!w;iymPwS@Qj>Ej7+AnXfrygqE@>v#Zlx_eUj z)+VGYjW$e{Qh=p7Dym?XNh4pkWQ}bx_tUzxN@tK&cviKCf*Bw z6%=ZDJ7Ik_ZW`b9KM1_n2pb#ZZzEwVx8T2uaP&~fiPiau>R^>g9KzFNg}DZZnA-L_g&x3dw&oiNi5G^b<7-D@-E7*bn_g4b#7vM6B{I z_Y*aalTBhSzDE5-4Rnb~9L0H=pD0QgW)dBzWwsCJEVeJ2{|6B#uu;l!BsPzKLcFHL zY9)hP3ACO|iat%W(PBSZZ==>tTW$Cv8y(?)ZLm=>W|h6zM&I$HjW)X5k6vb@oBZfB z8`U*>m7QUukNVM>Hu|6+z0yX1;zwuMXq0FobRxEWtv3^loXW7~!YjW=1VTb$V{2g_ z1~t7d--#|Kj6w$^s-|pq4+=FYG*O}J6{=V0y9!;T&>V#t6uLp7ixrxyP@_UODs-7b z5rw8Hbdy3e6uMcVnF`&a5I#iM_9`^1rB~rak#e^*9RICh0OcL1V(Xab8zLv5jA)ph zxKdu88fLSzxg3$C>HyC&k^2tYEi8q8Lif;As+YkhVS0V-nlw(`+9v~l<>^IK2kncV z^R87wjZLU*f7&MSu|h15_ff_t{fUaz?;Mte0N)DyH8EYgbJyDQr=iYmofZDZO*0Uc zE@NJrJXX>mqV`Qh)pF2K$^Qy=_}|bQEXTCLWG*&pwBxju<=j;pzTo^u5!mhjfp~-% zR!Cj>A(vpGozN=JVihnW1a{-%BLJ^ zDd4%bq`B4{au53*kiqjjDu6U2oSRa3`Bg-@-W%*l$qEs0o z$Be8vPZ8&y&1oz7erNJEG}M%=S4HLo#pH`uhZ7fPC-SRoeGd+IUc2UTQ!;ax?i(ADqv)?&_~^R3@J` zJ_Gvk7SRFqjn3rz>)?D(56=I!Fh zm6@D}isvM?RlYS5YDdgzoe5KK%u0(ybgpwxRxlg5B;^@i$3p<#5MA(Ay}ii2?qN@l z6M=Yt-8Rg&WTVsiiVn@0?cgEcm2uFi2(%mUPVplgFa*32enh)W?-Qz4HYB%zr;Fr@ zAg%?x*Zl~BL%`eaM-V4??Zc1gu)|yJM>zKicz^ICY(03a*^j_x1K!`Ndw7yC0iP|59xZ(p(eZs7C zP@})n4Um6f`$G-O$FYnsy>*J8dnC7@a3f#x;1fYrA^^@da^AvO0%vSGgwF z0Aouu%hR!Rlrc$!>8|+QcJ5y5tm5{>&S+P5bnQ^)Yi@`va+HKn{3pKvt6E4%G!NMt zUcv$^36j+Wr1XFkA>&DbWYHmSLv70hCq936IBoX{L}&SrmGkm^_mypL#kpnwe$z;c zoEwE4A5*OjW0Xf2!cXKSU}%NGQ0~d`d-^f7W!uMzhCFcdi+Oh zy@1L~QQyy@*-P?=f9RJ={6NjN&Kku_$tFvp33C^WQ4Oq`e*2K4Y)9# zdF>FD9N>UsdAV7Uf6>7=0CZo*KS{l?4ya8d4c+%Qbm}N<#1W3`f%IpG%~!$h~oxTOo!Ic37^r*U_6b=V8(3yQKcCVLAz%kNvZh4p-!;Z}{ksRRv zcHwwHOM{y6deq7)a1<} zXT-Y_g?Bn_Q?p85s`{IgxS708+gLYcSous?d3-LDy46hTTZ8V+`C{eu`J{@K&ty{H zn`Y(hnMv*LFFCyJXrkfkuqxYXtG*#;pVuxJo#+kBKrWx&`!F%NHmeTD+wawvw!*1w zrcRO0_DXHbShdU^X4Ow>{)R!t>U%=0u}<6fvqbTR={ao|aA|U*llZo&bK73P8!l(A z1uh%C_{}*9yt*|4C>tyv9PG2z2R^|J=kn=M^+82UE~LrKR-Lc8L*0N*++Leak^tng2?H#^7-U!#XXn8-uA~09jY=zS| z8no(pb3kfM^Z%9oXgvz20fsSyVMyHCw^U~RNVM|1%;H+JnH{?h9A4I*jRE!%^*wmd zX+joz^IRt(|B~_R#s6N%7mikld(AjE3#Qh>lFt}tLtJLbruJNSdxPNDHGsIyslA<*+g`^pRqpUt27lj|nYHc_t`It_?yK379wu)Z9~m3C(w1Y(i6z6) zz2Vyj*Y|tUZF?Z{cp2WH*G9f|+RV7(Ni=NK;?Os~>f+afiB+bfA7DziMPxY=y+j06 zg`rA++8fbC^T$vmrR-OeY%s(*VF)*xJGOn2n05+O@QC3v=2IG9zMz@*XXMMTv*P1( z;$LSXSH#O?xw!ye|1FK?l#5MM%QQmgGjTXNS&JZ62fnjj5wRUJ$Ny~2u;~Q;pkxnN& z%C|-j``|2ooP)ANNE^_AyD{~jaAaJ4Bg9m285#ehN4FfJW73y|ML~rBAA@zpRj>Sgxa2lLrArkZw!o5|HyrYbpHYM9>J!*f76MrBd2<- z?wiWpO$+LYE!s4o*MoZei*%3gu|58i-7g%c#}BHr@w-Kn5J=dKnFeg15*HnH@4tH{ zKqo4G;U<*Fjom#>aqS33Fl@qHaZ@&ObS}^3-haBN$XRuVA=1QzVC8dEng5i~7GH+mEe4(CR-qj_#h?sbL>gyf2VtxUUyk`V zUTq)#Jr-XRg|E&3r}%mdd@(wPHr!5Au}EazLtv{2vAsByMifv3Pm$LPQ-bmeomF-! zRmT3w;Ntd4eDHq7AI29YZU1+RtJ}W>hxFuU@>Ab07cOs?SKCyp;de|knfMjZAnpfk zJ72d*1g<>1q4TxWnY7+}#+j^;fllMJ%GhU|u=ItO5 zH=Hcd*ykGZN!(oxWw>{=h+u%Hg2Uj)i@;)BTJAhqr`P1fGw)9A~B$E~Q^OvusiTlkYO&Hpe-Osnxio_@&6Xl^839BuaX*>rl?)H3!d!Sq>=~D}U^44PK~pqVCo}}h-{nKmVqMX$ z7)vNV?e2j4qSJOlFv$`{PUjD6f-T~<^nqK9wPjhs^(M`5-L)Y&6_3u#;074;<1FzM zB5zomf5Q=G^udS{|8@`T1T{2ZBpNXCXsf+C7iBo7l)^w;thrM2b;ePX_8y&4+Sg3l zCnims5~Wp`wEr?`-G18HChcRB_Gdq>%%mMLX|laj*{_p|sytsd z@q>zgPw`?C?^XON#m_SFj})J*c-X}MuK0P1f6>H0RD7)BMJE1%;-@M8c@uwM@sWxb zn)m@R;`g!`m+9XifphZMbPZ5b^fzXlu#H%;9_nxDh4Dwe->!w3C&Zfd5u=Q8pqLus zcbL_sDmT19uKn{8xhtHuE3&FSjGXKq#5=~vPFt1phgX9?*MK&;Kghz77>-e%)ndZH za9MPFHC+Z&qh0ZR*-)PEi5sX0-t07jCiH#>VJ`<}YR-1`UBsMV< zt0z{UiCskOqD-uTSVJauF)=yCu=yj))ehxcspz)Yer(EQ$(RFnI8 zbbeJwo7YFz&9WzD;Lkgk5$ehcc)740tPIvLj8`5N7l<8UW0`sbcA>QKN28wAPCl4`_cp!+Vfy3|!bNLdz={QzgD6L~5CFIfNML99J63h(H?K?}M9EGI9I71w;q185!|fHiM?|q(tsLgSg6pMZ*kJaSx!0 zGdyMSnVe;2SPH2{3&)mk4Q_^wz$)VT;ove6T-0!jg67}SmwZZiFWUY1K;Dzu!1}`0 zGO_F~LAv=+_T0Tp zoKXL|O)qWe(M*~)-1@gRV^3x6qondQ&j>g?XAzE@tr8jyXNAshw!MY=qG{xS{Y`oY zbU4RZ@f6jyY*=)%-9)n%uw@S?z7uq>H~Z%L{PL}=SxxRrA*Xvuy7Lm#Q6Ql8wF(3i zbzg1jd@skXHg&Y-AM@?tO9Q^JQD)12vG&LAj)Pm8uqABS*_wN9q?j8;g^XIEyIb>x z>apwtf~tMCNoUoSeKgzrR&-s+P8MolrMMZF?}GuSP`XIF(FtVW^3H@%?RdBcx4lgp zO(WaQcG>iseUT4olWUS&r=elBN(Pg`S@npiu+;D9K=p#zzh1)rdjP(@pD>qgd&Zt9 zZZ}j%@*-szMlL#2+Jc!zTa31#%_wMEb5CmOG`p{ysM)0FTxI=p9yhBhsLw$WIZ%sp zf@sZD)<0}ltv$w`^m1eGF+*VG_0!GrpF$P!nfdNZU>YgJ1cg-)NN5<;#1i;rN)b>L3{$nNdnyagl$gcEm)HSu`%@44%dxKq4| z$b&?jwmUTxiMTjeJX**X?*D%7-RQF+{q`+=J1W$54{Pa2RJ6cB0!`hu?+kHzo*%hFn;l*! z=E`B)4~ABCFUlcvtPmNrD!JgvmaUqftVT!=u<5+WaJaUqHrN!6>f9pO(%bw%rn;vn z7kK7J{AvDoy7eQNVeAHQIzb&`1G8_938(Yr-CGGvh#tzxouWjso8~dq^?X$68+SuzhcHf|H|2F8G z4#WbFGiZTlG@ND|@3j1wg7G^aVS$MMSqoUA;e^p{T=B$=5z)>Ooj5<*mu*~GA|lmD z+Iinub_#0~%XPJMiX#=q?8+?+BUQ+YUk$%HjIZW5lpMpUE=%Z5TxM=^AB&2p``6nh zf5D9oTyV=e?E1_czbiU$y;U>Drl-mMPqXGmGiz>CAnRXCM|U){>PFM6u49~(MAwDw z>C`Iaj2;@X7?o61#|c62Kea_T9ueNgq%&jl9z+>rAdD*G9I-?=+L^@JI;0 zFn*^P2qE-uhpA%eK4TZwwvQ`+(i%=R$Gvg05~4Pommi;Jl-W}iFpu7$I*g~4*?-P( zd3Rrlju$Wfh{vrDk4(310CASDHn3tq_W!Dp=;7RBnz)rF%t2VvO>%xYIfpBM6Obki z4iaeyeu%_Qb(2ED`E^MueJdu!n$jD~&#B1P83M&FO?>q$e}2GdJ=j zKAZ=mPDq3p0L8+8(!j4;S%VVZS#c9=oE=*l5_>?kUF8N9S|INgMTtL~HK51+An~MT zNV4@+s1(Z=6qG&5TZ!=2-UkGiyeZ2Hk+8vtd?u|J2jR7JARZ1xU7JBH2rchxa-S5c zx=jf)A^hnvfLi6pn>{)=$2-s`bm*`$yJ>i|AH|Q?Y~_fhgFirVgj2buTUTzNy_4Q;pe?xPjUBuDf3kOiFWZCP>pr zGhv!s^P{t$<4>16GvmyWn$CVM8a%?@rMAztnrl2_+_u%-jKfr%0VAE-IeD{aDAUkT zzWCD-`m*1We#RouE~}c<{&wA$O}*VNOQF=Bb{T-Dc9=u%)Yf*~d<9a^J(`{B zZr4hc>S&jhPwMe@R>?r>PwlK$fz*Gt!wLhbhmBK_)X&>x;gkBQxqg&dp@ZGk|3C`w z4M2vvC7Xu`mmgoLwIKeejyhYAu5)LI3?8+K_mbFJcyeSGti>E~{-7_qM5_q$P;BMB z2xq~iM|HM$)7Z}aoEiO8XGZ#@Ng0gadp}tdQ~Rn+8&_S!RTyVg2i7e=zJMdZ)OJg+ z+^M0vyEa-MezN~0x7ty|~$jQ;Zk0Zk= z;2u&D+Teyv^Lyq(MXHS`Hyf4z$I9w)gbs7r?+@Y{hh#p?ZJuQm z!VE>ElH5<`OfHvP%JSfKezBWvLSe!x!gKhQep;LGGF977Y4hHp@!xPIxgS!Cd@j`I z3rX-BdPr3!SCT)vuGrNb62FeVF^`?F?^+Vs^$qGz^c@Xik?JXD5nwlQS4VUmD)x?p zJ-T6HzoRgXjNwj0B+qCU$gn2Y>MM{pihWp%5Cn2mk!Hz&e3sA#+>ec(UytHL?u5dT z5#2*f1T1lpB60%s5IHZ(?JqhNxQbSuEH2u2?b46+H}W?6mux`E>f4OI#wIquJ21EU ztLyL~6$dU!e5P|@U`qXa6Zcu|y_qz@@I7QU!ajT^p8jaZx8T7?z?~|67=mG1grglb zF8$mLw=nf{a4Z~{eEzq;^DXIIMWdqz)V6Zvbob56XSiLEO@lk7BR;C|0Hia09R}LV zw*Yf|Oc4qAnHnFe>bh}s{Fa>TNjX(r&axMTptU@amRt2)^J{KJIC&zRjN?zNw6&-u za<9_EYR_e#t_s{KtGPDTjTi$IJIENHvN|#Sd3Sny_9U*7g&s7SP-VqWkJ-NE6p}Sw zn-ijAecQ+$pWYsQN2c4c8o^b!N4Hm6wg`+N0y+pnOd&=+1U!A){Oo$;#Aa_kJ6_kp zCo>Lp>x81@f-8XaTYt9_FZ(N?vM{9nVC3uQp_<5scwJ9o;rjULOMnfjC|6C@(6VZX z*FA4RtmDd#&K+{%RBajwB|lH?rtO-@eZU*JJ6^Y571(S&1Itr54F_#Hv9q9l+RYwi zP&0k?v2Ai{uXe`>rug*L6xRX40T#c$F*U+rD4hQ?m{%veC63!^hQpsr$YT(0&?|r^ z<&b+1#AI^+jNC|jA<{ZXOS(2L4^|gZ@fT1T*Q}+;k0r!Dq zJv=87s^LXTxjm2WIgspv1iH^oP{f_H}Q0*M3ERqKAe#%YUgNI6zwd zE$Vtu$?B(;hzHmEk=u#H&wrlSlbe;q)yVV7{G>9+C*&}Not6{ev(dG=OFvfPyvF#* z_`Fc!#{hS29DnIa(Y&*Y)%rF?qDS(0po1!+M~YD1m;l$BWP>8=0s(VDZFk-CG#p5N zMkyHZGs9P7G8hTtSOmuBd0v=3*Twh6En?3cA3$0CGm;52+ZIK(dJt$H} z9{of4PF#{fkIb?2PFLc>`^}goDy~XY|3&Qv55@6V8F?i>WnG5!F`U*bBccnT=qCD)^nY51K%l z`@zzUy8hP`UAQjb)PGR2Y3Y7_PE2_|c+{P;j`?J6Lb}b*Cs!ihX2!r-cC%_6sTz56 zbQM0bmu{k>zSvf$e$!Y}GI-dX@;o(B&*R`eki3{0Qmf;6q>VjEsX{Db9u4w%s|Ue|Khi5o{TsLH$QYU-_j(RV37o@uL~ungTB!Fz&xbrL+{$*p+ESz{dN=R1gr0Qq86d5%VP{`MGIEGP28F8h?dU z&`NuKW6H=DKYs~fs^!+g*W&*q{+S++VWzH|O4L2UZVsBY^4*#a}notg34x<1JErsN zSO3=rpPy&CWzaMxji#-UQ{q|JC5=c;jOSGCh!nYNFp#3O$i2UH+V*QheeYgmq_HEH zn%)h{l-l8Lj$fAJn)*{a#Q4(sWzkOo{gog#@kR-K&BN2EyUs{u8`h@d*O~x1o8Rgl zBJ_%mG60p@fk|!jvqw&{nS^J*qNbIZ+|&HrJCpJUn!4Mkhvbur-D8P~zu7g_ODh}e z*mARnU)!{@Y3a=cBZL0lhWQ_7Je!tQPPx+mp4#MB)W83d+32irUiM|xPTP$`xhIj| z(wnHwDu|p`zI7!}8&&O?KPxwNob)!WY_F0} zHfp`hnLn~=>G|S|v^)~|SQLiI`AYN#$!n9kKn{z0`@w3l>Xk}!+Lq*-pYIM$%*raj zC-CT0H}A)G1*2<=tM<=3ON)#)56CYf{Nz>|V!&Tf<*)eFlYd=ddGA&3fwX=5RE~Dv z$?1n>Sae;EHUbuor&$7kBL$Z1J&)wIUlA}y4tb4_%DvWX9DKAtx{+c4Trv0Wz z7!eLtEwlr6GWn;1=G@2-!RoiK2bXC7U5kg-0eHaR6f?66hr)^fR^HJ&{vV1W!_iTjlDfE5H(%)D-E5BC&DzGk zX6y3|9^#KK0ePIAyzEPXLQ8V0&C<2B%M8#5%_CD!K!3u=n*8`h$Oz5D;^Ps}BY0m~ zoQ&U+OB+{Rv$We}Ka@T;B9Z&7W+QFz_29#X3l5YY#gAaRJnWtPhNaVMkr1MLUtMx! zO7lcLuVKPdo4-yt%Y~a%A{T zV|oA8wy?`kK=Z#b?;ken$!t6C9}--K50bHOOs!3A=`iWdZ>9d`bAU@5&ky7wULlU( zIA*D*aCCU!EBZAb=BG+JNtk&B+dR0#O2cThS@r)N8}}wm8L(PuzgvoMT*-vUgAyt< z2}L%58<=f2AUaDZGxO!g=vQzfGYm*_z3YOJQ}uF74Cz|xmrCvWq+~0GHt{?iYM$lC z^pS6YrF#QQkl<(G&+a6Aq*Wth>x5hnTWCY2wZ1{iKh}CA&*nFuY8+t<_`P267qFePdga5taXw>S{^$~S7b ztk(qXH5q*h)ZP1RO><8C%A%?(!;A8kyjj$IO8nILMMbTlkt8CcyZn_hV`Y4Vi%F-B z_mRbut0vPg^=43}f%6mo?QWmyKBxV6El;PfkVsP=rZ%dU2|4KvuM}K{>_9iI!y2s_JTaj2E|k%36n#`BT}XjR}R5k&7ro#qD*qxpbh?vs78Rzc>J?BrfZP_pO=XWPiQqM859bwK zfv;2@ocCpj(s_C)GwV@uV+Qx$fD-)#dgrlKr8f{_s3qwN$EJSg9(ZEL^y$+N?!zPQ zp)*R>1h;!9LEL_SAE}8q?}@aMAF}KU6nVFRFLwqGUatgT zWHL`WUi&ZiZ)X0lWo?Rn{C&5s$DDS!(|0{l0JfdlHFz~+x`p9TvP0^b* z1)6mbn1?{hljr(DKsV{UwAojQQ4BiRX4p5U32b;>AP@(k$S#q zWmO&Z8FyU^H=~GJ{yZcVpR%WUjT{+#g z1M(uXVGOfqxGfxt{E$`=f|}oeSlp}k;0|$Nj^#(lbI#M*?vZ3R>WZolAyzV7tqFEo zyg3K?rAWiTD~=x|UjvP3Ff}QP5%x+PMFO?r(a0LZ17r7kvKy18(1= zN|h;d-5Yd@jONGzX(Xhb;g3trf?tuS7}mdP7UG{kt9|@iFQf+%=Jr*JCWCxBHtk)G zEK}S3%9F2-hXh$Q5X8jyk$D5gi%uv}w^vNRk9rsvuIWtQ+vHBgQCyx^%W!drGe7l# z&kvrx+F4KVfb$nkAU>%;Bo}tpyKblx`vR$aZTYI^jndE* zze@O#8mHw%DuWHSY+ZB`p9WA+Y?Dg$I?MC;O-v|!O6(YsDp&OFtU9H=jD~TzIMiTy z4UE5yk z?auNNepQJRJA;s2?_>D{6BDxx;R=?6`&5x3Uo6j@<$s5=#DGSVPp?VAfl?#k_oT(9 z&<}7^)!8gWdwTjjy}*4Ur|bizKH+k!&A?7QklaNEPYMLwUp>!Y5omL67U`QYw!TR2-D3@ zp&Ayxo8L?Q$?^;Jxs%CD|L9xON^dn0a*q{|X9)NLsPuG?GVlx#cfAqh<2?gk z9DW0*?%rDE+PNfe747=YX`vV1v${Md^{b41w&hK=T!}=QzY(fpJE*N<9y_z*o#>>f zO^@Le5HICdJA0Dkm@&k!Hnutwl@(mBv9?S8h?jA&M<`u-IIx7F>WY-2TV${4qH{9b znX|^TpuOn2T68aX5QVh|tm#8k?@gGzJCf%xfI61^7_Mitn(^_OX^jEcX_fDs{|Us} z+a`N3WE}u;cjT&mhzkdcb^Y?*L+U2RT0dY~y7SmiiA7&*fUPlm6T1wg`=?HNJadFB z=XdZjhDv2l9Z=?`z%l)keLN z*O{r%@+7H(>+I_E-Za-~eU?N6_YpkxGmt|#Z5hB<7B!^j)g8j+v1mD$*&1DE&|>EP zH&p-D^GMW|QyPq7sy(8L?}x(mHPl}O6oLh-;`Kh#Z2w+vFtyS0he7z2vjSdSnviRJ zZ5n#Xp!;>kEA^|DW<_w8moXB-&1`o)ozseOq}OYI0HhX~yQ6~{P;3+fPeol(@)jaHi{pf*j|!M?;Hsx;f{~;nHX92;?8XHH1bu z2MethU5hDjmX9a(URX{SWHDAVJ|cq|9yMW{a-2)HoM||YoXaN`WDR9IBfjQuXTHQ0ZDpJOAkfUstVk! zsc&{ZrRgk;1@iy`G&?u(qF(+laboi+Ve$8JyIJS{&eI0oEu=1;9AeA@UIVlOKXe{G z7!3Bd^!>2+aanGazY9u(C0n+*8zn3Vr*eaU@X)?elCLI61>Td2}(NusaWEy*X|FaR+m0fD%O zh97WZn*o!(N9$~=dqNZ=Al=QuUY0o^ecyYUb;-wvt|iSM7QdP!t(&jc1q%j0+F9m} zQuiQhs3f0Tk2&*C?yY0h%_FA>r)B3N$KVHnEhjNG*p>a&XkTFdkm%9iO$CXWeZqp< zv*kS!iOoMi`utRRZ+V}$lD1g~a=hOW;Jn3Zk1X0-meZ;kM0((~oW@^$Kp2ytmR_2_ z!>bEO1-uQnrzpC9X7UOX*Oq=P+#xG+rd1r-`JFCQVKb#^V)5IeV9=I7Kb*SIX`4{U z9YbB%J1dgsOJAs9&PrZQv8qoZ|G?w&&eL@qtb8?cb@Whabt5I*4cO*}PkW)V*-a*_w zkQ^z(o-Zb5U03Eaq0w?ce~Z3?QmXQ+EZkLz?*_ZF%Dhu(-GJpSlOQoQ7h}XM=*#;T zR=K5b>zPH-OJp+-{rdfxt^){jLNzCTfA|i8SM@b!(Zk^-gaflFA!YUsfME+!4IH{@ zSEFD0UJ#FkV`L+#mVRK3i;sUI4JylbJ(RVCU=#2*lFmu5Nv|ZG(;Q`)nH)!Z982Um zPv;p4gEIggmAh$Fa_&E{g6s*R%;?A_=Pc1Xn_pc5Vms-?R#HRs(3wulJp}xg%D1M$ z<2Ma%9^chgrL$^sFkz*c{Md#_RpN?0&eNSsKE5(>L(sXsatKttYG+^g=LhI+dOv${ z@Cm~s_ETY=I9_Z+bGQ5906<#I@L2u@5lxG(n`70Bz{}`VxF08{dyImx2LAJ4(Xp@r zeqWY^|J#Pa6XRu3n;2pb5!)kxk&Y55f!#H%8x@ekY~EclPB$3;RPzabkE_(L*xRUI z{8|${POlL`?jQ|Gjh+|NZZSQta6{qtn@LZe1Z}&I88EzmhZcQ$z)x*nC<7o5asryt zf^m_~G$%HmhLph7p)3`QE`{s4H(sLfe5Xh2wo0^WD~;is`mz`x7lcYV<#Av5l= z?=W&Zzbp*wMAWv>|R9K#q3MWFcB_A*ziX! zPOlL$`KN(-cX;kEjlP+Q5E4g2m%Kl-#XDodJZFlN_RPt)axH^8ed$^MAyP za9-Z=@~=N`{xQnG2cbPZfIh)wMlLZELeT;x z=0YOZP1M$JR-%jF5;HbGp#j4nZzY4$(i7{40(cd5PKO>f}o_G&a*UEIE0=RhlI(Q>B*Y;@V z^u>P!Nm>Zjps@KCjl)xY{{6O;w08Yr<$PQ`(W%{HZd#bWW}5VBXhW_0h|IKIOgd6u zp~=p2$%kSAmAoGnAsyD^x&1msEbUMaK;vh*aP`MerLUAlz{9~_L-;KGf*2h`gO9Z5 z1l|oi6MJ!%X_w0L7_I=5=+WbR68L<&n@@4W-lUlT9v?N)j-2%BGFB5r2j$aR<(}Ux zsr_ru7WAXc;R+|F{oCV68K0WN6%BDTS>^`47a9Ke1!OaeuXt6a#!$M(8PwS1=6xFAB2|^<=3?ZZ&Qb;a zEqOkRk1`pkfrta%5QD>P(3_n>FC#7-UP_I}YiSkyS3{+fbqlFoCm6V5ZxwAg&wy}$ z@euB<+N;!i96DhNH5)o%3=hr1eP`&M)lUt>MQRI&dHrn>_AXT;Ppgpu zwO>W;i5mv@#HWVasYN|zb{PWZjS|bgNVL=ETjbExY(Ge9Ol=a zA1?sR`^m=Om>*t;jPCiHJ4`>rWVn9&KT~O6xMl7xtW0c|@Iz1*JzBJAv=QQidKw6& z%0V|joIDr1X{yqscc0~`p!3j>MD^{IQ%Yh=KIdWR3hjQ3v!zfJpJCnZMgKKV?=2UU zY-CrR%Jcada_v(f7NKu^U%YxL29NJJPu1R?=T6V-+&hG6SR6fYMu`xI*}>;aOv884 z4BUlFHcrdGQaC;(54PI!h~OdD^#U(u-}wkI6%_d`KcG&BRFd!ig?>^#lq~!l+P zHQzAj^wYC>p=vmsYWdeC3)+$)YN{2ucrzMULyI1#SIgOV7;oP+I*o&Q6rc2yv!0RE zaCkH?RefQNyPmW;uzf&oO#c34(-|q0s~L4MU=+97-y{D-ip+M-xsY)5^&FEls$GOL zmJ~%XC69Fi2!mZQvNjxcTK;Tf+C$DEV?bzRZ#ZH{QX}w3R5&|2$X(jg*)wD{<0jHr z%H7^TpoWV+POM7h0eVLVH8iRQa@Xq1o)MHCvW_ylD*jr)2x-6>i0X7xPFrpG8h0DU zLXSZKY&UmZry=y|V5aDRx@1;06JrXI&MV%I4Xs%_0Zj9JM`zDh9;Nyn8+LlTcR07- z2-YYtM`y{Ml$ygq2e{ucqV@nCw$CUc9N^RJ&an}Z5+qH4W#{V5i6Z&>~ zH~o5d&+Z+&cceo4-LZei25M~-J>J5(+9)UkxPU55_e)vuGx|5?U!@jw%P&xBg}br? zuHL^E%U~>q`$1Qmf5SadIuF-5LUo#Pbl0iIj1b|;vc>N&O`17g`z6~?*rvEw3DZ5; z?M)zKxAmK^3WgkoTFyVnRM2B#Ut*cjeLypXJUyv|evh5r!{kIvTiyzPfzTBdt;Q`a zL$V@Rk?k~*vsXhkJ35X>K%}18A)+#KSL1pscmnl%%sjq*I?$x@z-Lctg#PlI#a~EJ z+C2H{0wZP)aOdkh{MoMfh0;Lq?$B;A1?X_aCQUW#R3F387?inMDaamF($Wk4_KfNW z!ZaM!a}~T_jJ`-KzlIFXX=<)E`i{~fV%TGL1~s##ezx!uWk=qGCm z1q+h1dEJ~!3*2Y5hT@8UTm0?gW?A z)bR8fM41^5#r2}O^Hk)vylC$kV6hA+D|z@d`qml258MMNZX)41i%t|oocbrfaT;|C znmO6Fv`Fw;K zqpuoGey2%7G4 zD$Ha^UP%tk3U3`BRx)L37;qSZ7mz+EIaVNaiQmE~i)LuY9oJnIE%Q7k0IW`t2p zUT_iw^9m8LXQS~fLv`u|+QU_F?5B{ov#P$& zU5ou(VghdgBMi3648TYWMbMBhJa`GsUWOj2Y(coX=K~2<>AobsDW}HaYkYC)SOx%O zGZT$Qkm}jkdJ4i6LW&Wc;$P5;$b;w{Y?WH|iF6|ej5KZLiT8VyX}fzEf(ohr zwObHi=SNpf&|z$&6T63+Q>WS@sT1ul3rkKq1o2d-M$4Je9frQg_t9>Z z+La|wHSMBA0sui*M006C_Axs2x&kbgiCHWJ7CU)#rl3*EYM$dM)tpa>SA#94q5EkT zo16kCtvYy|N$u1g5-&)Wiq%RY$S~g{$e^@eif^M12|$|81%~OeppSxEV&LflMsXFy zB8bSMou=u8SvuS!Vi5=J>X9aOZz~A4fP_S$&_HSO_qa6~-1=|fHEKP22-m(_VWZ6> zIr7!Kc$SF8!{_}mmC&!NvrBI6D-+xJ2uL%{{eLtkUR>TWc9!LL@d@>{grC2&i?AvNd-C9hyXp})2lC`!E(=tP&- z$b{(WkQBe40(LL1z0W!c5YUb&M`#k%q9AWRA9!?uVRjFC>ovDEwkWizNT~+LZjTe& zLWzNhO(R<*WLD@*r*9DL(1y5gt4z1pgs>(qUr(6b#wcwCDcvYpN%3~#pWfJdmDsjK z7v?j462QoKe^*Tcg-?iLG3l=GmVli&={}0?P5&Hqe2UcXEyL{^XR0t~blkVHMDlnQ zwQ4o!3RHQYz{v)XNOA?Z8cZGua4phU{=9$@5k?*xM1bCvbS(p0zLw1$1CSZHP3ZWu z+C+j=z9LoBSq@DU>v^=|H1V3{Cp{-m27gY=4kJ45?(x2^!2&r-ph zpOSNu>!r`oifr~9(-x0NugQxg$d!73|6lCA2|QI@+dsY!$CO!=LY*QFQb?kVg;a{7 zNdpeYkYk90sHA8(q-fMga~h;UDUu8ffXg*R=6qWM(u6>T~?w;=Fd7tu*zOH?(z2<3OYprXojXD`FM_2P?#g#;Xs4HR(Yl$#J?5sn{lG@*uG{yB(U=NXC z^rB}?+DM!6M(t`a5t`ElgtVa$%Mq`JD*VIu)RLjV@bd&Ey&u~lak>(=)UL$Yadywc zReUU)f+5cA1E|hL?wF1 zcp%-Wwuas=$3h=3l{mc>n##un;~)~1QbS-l2NCY<+FuNHskk>RQesKAIvVsliY!R% z*#sZ(HJwD$PPGuS_lpRDI6F^tc7|XiN%UpbPl|Fs>0d!t8Xh`}Tp}H`Z;7O1b4@fQ zBUbWi$8OFjREk-KpRmVsBEE3Y#4l;=&M0PFLH|PW9O6pEAn44B(1$bf9ZortG{tjv z6p07v7fzzA&{l5J>502+PS0ubn@A{pQ}AR{D7M@ZzLaDV<~_~lVD?sII4g;#qlX-F zMBDg^y*@qZ`CCS5>=Nb>if0j5EM~R@!Ryh%LlsCEyf}J&I`k33&~G=!!dtQ%7(v0G z>V{BcP15+zh6SMXc>yGcp)4<#7)~!E(Yns`1aACrv}+ud1ZfCGXxFNER-DWiY$H)! zs>z55i(T4^>a?9aMS>IUhy>oLHj6G?=-c39s6@zHMS4bIWgur}kh&s=_XHWhkPZ|z zjf@qUq+6xkd(-YQ?FOxEm|=4|J rsFVEzco6Q4s3cCusk~z3De<&xe>}n=$C@hP zutede_BD1Ne-}25Mhzc^8tzE6Rff^)Zo-Nws^cp^UC6?wQ$@S` z!kVs%HxMaxvH;}(N_r?;QV@cHh(z3F15*2i>kW>0#D&-1iCi5Ibj*G$3v!Ope!(10 zxWcwTPdyA021*YN6yqNuClVFVNyb;;4&Mb@NZQ90l0Wdy@FD*ly!38VPMl0Jit$-; zMxj|9e=-$8=HtlBI5}zu0jPo<1WMvc0+hpS4H-{M3lYg--5nr(eBT}9c226@)XLmxj zj(@nOcR2Z;x){Gl9Qm+Z*Y*)=I_*yjL;1O4#N`DmB6l+HGkdJ&Pg;AO`UzJgf0vnWQg?ur`(jp`; zd>6OvJq&Ri5r&T#87jt;-VdIe@@vr#u)vTmLPtc2ctm&zn$Y9IeoiJ|kf_k++aV6S z-CcEbPzN#HiT`*7!5*gKF~N^zEe)Kb4XOmH8h3?>5@U6FLzdYX=soEg$)C~@mVsXdZl&4EfGFIz=J4Yk&zerka5Pk5Y}QlgqP4xfX*0?z@#h0=X_ z^J)oVh$PNT)FLN*U~-lP19Dgx*=BC~(|tM{hxP=XM7(G>+)4ibe2uy2>P5-{`<;TNz99w)1?Xp;)V6%$OVB0#!qPK z#XR>eU&5ID#nQao(s6Xt=2t_-9xi^IvX-dDMGg3khx`Z2U)Q5f6n+tB6fOV4LXJgl zPhuADBla8j;PikzAF>~sPCbsQdB__ax0orjY$&u^C6F%Y+lr!qgOy0)_?kk}o!3iv zq7Cwc+%!Z&Ko_kS{VAzGXIz&&X?Ts!y`gA?)@aHOiPlQ|Z-w9bqDhmJ3ayi7k?xwj zAe4kk462FDM6`WX#S_hK-cW4(z-U)~ZTObYOhl*6uQJ0*?y^UGvOUXM<_k{?eUIiC zXX&Nn!~<&>LeyNLO2#2$mH6dxqK!A?>?s65jFIJJy@k&5(HOWAe@L8u3|)x&c>-6H!9(3y6PSm;+qqZBQV@k{ZpNL1tt+I%_;A2JG+E3wwD z-W~4}!wQJ|EaaSK5~7PmH@;%z9b}w3*~N)K$gq=%sqvwaYmr07SalkRPT4#$jC8=7 z{Bpb!2ji%kM(ISy!QrLMjg+22aX2lZK0zaXHaC&imf zTyf<==VypbZs-?ilIrfb8{u!)#0xwI3W?+Clnk)gQxP6cbZWg3wS!i?9nDvI`N`g-0yX zvBdIVwy-K(;Y;zJ3X2>5Hm>;*n~@|obh=55I(dUcF;ZOFfy5zJzll==IWVZJGBYuI zgb0-K`jlF$E=1=Ie?*mfAIVN(ppA!1B?yOX!igXaGZ5Eb_v_K6V~!$pMy+zih@PAT zr^Ih5{3^ky#^jzGaZH#8o4S~^B_TJCYi6{f98duCbL+u4FP#5|K?y+Qo~P;GF|K4 zUlNHJNq^}*DVkaNjNGwgTKK&aLpmzonUzF7hQEVop(K=v^*2lb+X)byPLf?Ge>@Rr zocZV(_9LqNb}~X04kY1cA|ysA5*0&{D6+Zn2C8g5&OCe)$2OxR$N;e~s;A-_EBwbIjy*kLHw3dXq-r5shbqP!;}L(699Bi+uBavj zs3t|LcC~y`GD*x;AS~>YhAG_-B-yScLmwSc{>7CrNry1GBhelLnc+i`NTv>vOcSzb zmn(9D5W@^QHt3_!A#_BRlFlMx65_0h93h`?C9A{gI4_Gy`$YU9vg|#afAxYv_bd&> zT^&k79obK&JapRbCAnHqg|EeumTY7qBl{s^2MK!;v{E|1unv{TTa7M;_mQLr#Wj?+ zKi$z2wtPn^1^A(p_p2y3R;#c7)`KIN!iH;O$(}p-JKopTM ziNvMtl}$+wYWRRG`6SL`rVc$Y!2|`)yM@ItN!UmVZ^zL>4YJ5kIo0wqDwMxT{=oWH6%xXXMj^gA!*bCE-iFI2%F2tXwfE0ZAi`D(*?&q$T(u9z5sEp~KrivJ%sF ziA?&{z#=(7M$vunO$UBqWusY@;;LgXgr+5Cx6mx4Nq!`X@v+g5XfRgRldnt4RP*gS z65Tq8{m7?!sA{k&mo)xsp#VzoE1Ad=b)GnStHFZ8cCp4uB$8+W@RtZZxD~YmB|6J- zK1V74b;N@|dN-mb8QDy7q^+FMPCR9`9slW)H#!;nOA^NTG8)qe~)9hAv)%1DYXbzZGl_iU7c)7>G3K7(3 z`IuC2CBeQ^bT?Vd(@z{pMr*_ek6Pi#6o>czbdG6@IAtVZ)|8x|ba6C@8H!`v?hZO@< zcCs*NO26>X;i0i$_L)q(p}mCnFl&sM0@btEZ7nE$e)$~33i9?g6GYBZyx1Ps);FBY zTQJS=VX)QDN$qLk-x^%os}yf4;ig@bD~Svo)6E0*744}mT$Yx@3@h4NFzq7%ZNqs4 zZH+tdoP_gw4*x0%hi(7I~qQ9=e2TBC^+y+yJe5nL1nF1mmj+_i+(+`!e z`JeG|i5g-@rWp-PuFY5n1|&ZB+g_O6$DvmDLWe`jW`+)cD<*=&oAe#|fCt>vAcW7A z?_|p7@ITNIfIh+f@GAa2exV-vHI1PV8LbC@m zq1fTb7x1r#>zg%1&V?#!*&oS%kAVzHb_=54j{mQ_G6?<0yGU)ti?wkreZxoLBT~{A zkakLO)k^#~d#AW!DJXi|+i+l5F~_ig#FAuL`yBr3`EBpr4J+mqUt+-$zXqR}yoaQJ zu6#?xoZ0=*A*8p2jTdGmVNA38 zyx#nF!-|HPNUrdF!3Ia%ismEeh+sW{!~``A;|-jrDp-kwn$W+LtKwuwemYr>p=%%7 zDX!*Fp+rpX5!L_SUmp183`r!W^eHKTe66KGWJXRb$C5ckKHg%DPdPBq)Aj*~8Oa}V zvBEHULfiqxmpVHOtb|G#U@2%6(+V1JLXpXha`cqsnC6o>CYe0{`}%*I16+T$uh#;7 z!x6*0xm?P9VubrNj<0_hj}tnM>lqft2}AS@hZzks{U_1fVjvYc)KlTzg{d;zdR-2b zTHm@LWaI&_hJBm8cN?vFsIWihQB(6<|o^h*yrr$P4Q>LtO$l^y+N9o6zIw9xlCn{4waLUQ3lMjopo zb%@fvCjQEk3;SlDl|1nLQrd{SIfA{{q!t-}#sdCfnJwz63Quz77cA4a2$bH+^-f{T z^?KPlH6VcP$x#71nOl9FuxDwf=}0oi^t zPp=GS$=vlhpZ47Imcr-S`Ki}x2KP@b&pLCssDkNW&kP$g_u{$Z+zSP)xSY3V zPhZ+D_w=mz_KK4{v+?&{pNOp3rKbCk8Q0@cn2M~|v-mOIn=BUu${%)H5G{LK;rXsk znT-Q8sct8COD(nCsMuVwPkOcA2S%UoMUwvWX0qGLd^xcTO}M>YNd^Q(Xx#l?uUE-; zi+-SVW8!1q;JWjlKR4yC8<&5s=e>1V9)f-M@5gMsv*&VAwdu4Ebx!YnbMN@h%scp4 zGTUmB$ti~idh*qd8r@EOnka7K5zVwIZt|#`UgvwbXG@+Wlnj!+cxr>&89nBL({m4XRuviEF3(QfT{BcG zvvy8ak@pVW4_7VpEN? zay!;lY>>~t_u^dBqb2?79?IUWs9ZJn>D~A3ryu(T#XabIvq%2&IlAXRJ&DW;jvRkZ z{iU1qnveyGo!7@m`plJOD0lAWtoP4kw^w!sc-r0O_E_|^Tl%{S`6|~q=9Hq-;%1(@ zzK7a+c$7~b??2&TWRT^=1$QzZx!tevk*%|C9#cKaB{MIhWOr`uvfHP|H*{tjXnweO zF`?+fb%TwkT@LO$qa$Hbeqp0z)y=^(Yh5q-)@Tol_Bow1(etvHhTptRdci|R<;$Mg zvrev9qfWvtsYy(qbPG0y8ogGqO^k|N^!1n}TyMM9$fc_exy>luV&f#8P;+%cZqc0t zLDQGAn$~A>PT9vM$7E)&(~sMITQha_RF$HMO4>Cpl_9N*HrORDXDo^7P^MKHQ)rawzUk&JzHeBH#|j?Z=5cb{53DF=Y^zrg{az$0j5o-%sZo6 z!txyi3zlk>*q9Hgoh9KE)odHXZdk4FRCGnt^&ulcZIgAbLQc(6L!z#N(_LrdRE>9v|=jC2dBCsMgD$G^M*|Ss>di2s(Q+yC&s8B{G;pZH5On4eHS|f+3FhAtEOgf$9FfF8(6J^*G!P<{89yx<7#TSZhf5e z)!buDGGySMNRj%)O>2llgd1t zqM(j7YQ`;DqdD}wn$$=m z`yqY8A`PX^JPC35SROFdB+foM^3*)9DOF#}6kk56xRHJ1b5eX&{X~^5CuFsg&Rz{k z-^I7djklktEiT11?S0uw&2XiH!l1FKPQKz9t}z8)qNXn|V>|XOF-deypdh|tw6i!WzEGWd8!@dhvco|5_DrurC6QUDGzB^EAt;?|8i_}r2UUtP{atj8!tXP-(Kv|VHv5$qB6-- zOE8hp!$~4%YIlY8W9}&4U%6HONz-&W@6WwuTsBrqchle9&0_pq*^qs@n&YoM*Xk3w zx9?yrk3Pp_himNceA~OI?x_05Z2w+YKa5oAOl|9aQ1_&Aies3Ps++l*w!wGR=yf?g zCO?nvS#Lktv})*jvvnJ;jXB>gJKFr6t(9#2D$8l33(PsrVivP{&Nm5Ox^t9C@q>|! z40Yr9OEV2m-`i~PI-t_%F++Jo@{0hSL+djJd^c_4 z={M-iq9J{2FX-8ObPQhD&2mty=0g4Ah|@#2U;Q}j_})>&3zD{nw7r_OFmraFux%qA zg=!Ai7^&wpH6rwVPoCY5d*O>7@nf9MPFmJOT7GFi_U$G6d9hI&`;1+5J)If-?fR9) zS;O+Ut8HTfYrmKVHza=v;;zaLnDZubf!H)dzmcXb{?f}%u&vYry?l=9c}^{C@VHxb zkn`-KxAz6{{ys_m^}ejKDun>oO@SJY`~sSFKZ-jOLUL=iD3*JWidQy8W{K ziDt?1pQc#b73!?8wKckF6E;iHddSNOW3|>Mj&t^V@9HZyV!CBs_)MAm=Vq)eXm`my zGJ4um)g{jNV)Ca7%$~Z{xv=J}dh0X$Q#=KCun-<%f`^3l&tC+apSvYx-2v3u_u&sLAO&z}w#RIYj3 zkYIAO@#0+n*UdTIzm-

DbNP`aMH(dgoB3-d{ALtG|xDy!&%_=G=CN2C8LQT+s(z zi}+^cnfC8D*~ql+(<}S*H!fU z`1r-7QID$S0;-yPGVY(PZo0etl>R;Des=kYTj_TeguJYr*ITDT>HGYWftz+-jv4ac z$^>im(i<~o7JW6}T)cNhW#MLla>3yflgrXd)}y4ZU45@CdyOY$dt+SSs++wl3vTP5 z7rSM>v3eVN4Qkl9)AHb!qpsdtKfLb0xg@rJQ+sJ%+U?^pySH>V-MJ^~ z%PyVZ?9}cOk=rKb8tzznr)9grNPd!(`=qt=pUAKCPrSYU&92ylhizjMS4?2?v$e0R zS>wGu?vlc+6)&^;#NK)EXu0c+jqzRwr>-2W-gC8l=)G0xGyIcWdU zC5sv}C#eiRp>izv_<$?NkEt(ze`t8)h=UQ+!}r@*ojY)OaC>^oxY2u#d|R?_*Vg>K z2 zPSQ)g>n{c~Rx_${F5RE_xO%~d5s`KEGnBk$rOoW+{KepaKs8P2%fj|!W3Lu0t~-9H z)OVb8Xt-|ht(zgsj&D{|SJwY}Zok#;a`n{%1-E;TT_3jh80$*bweiu?mM4tT=UiQ< zp6xrPTRFA*l)tI-a5?ukTc0-1Ub%Yf3yV9eS8>kNkACdtwEni$pb?R)l%BtS7CCF0 zeDzyvze`iw_q6LZUryWVFvOt0o72qQPd^1uShi96W9iaE*7wv4Is&JZr;XG*r=3)y zz9lVv*^q&~#(%r8gk>YPVSTGoo510)#Vpkwv#btlpH0>>tZduEUvN7@Rq^okV^5@( z<;QyzOIC!W&p+2w^X2TEj8^kHHOG~&itg0M#`r4?FIybo5LvueQNFCy?_}8EQl_V4 zdQQ#9)L`4>&dQD$XPq74Cemm&o=c&o=GoG&)Z8&RmoXq+|FM~$(l`dQ*A9!$d_Wmc< z7YkQ)NDLo5q36UYA5XMI^f%g~ygOl0zFw+U%~sZ=YpsihWjYiTFuqkB@UdB-Ie$xA zl-Urcty|LOeR!|^LZVl|WRIAtkL&KRUp1bsb)U9Qrf5_{c65zB<(Jnlul%)P-J10? zybL@)-|x@dyOtm8p#D@D^sa9e{dwkEl9lGOM*!BMJ_s<-^MZGD*?D)4E^Ofx+-%XD2;=jL@ zq-*;~VAJkBHEQ^0<31a09-P#5xpaSfW5botr`PVWlVvM3_mc8=+><|bhxtR3f$<}^ zZP?=ceb}&V=UsI>Y6ZJh7S3B6+2e`vtzjk^M<*mG+r6|BXDyG*jYz3~*8S7mIp1bC zOh~ny{=T2&3a+iE<=rE<60h9O7!_k`v+Vvn-Qu9r{D>v@-(9~Pd|zvJx08FGJny60 zvOMbWq$>Zi?xz$YkIvmwbl&Vr3?ue?#?BYp)O2J`(oKSoe@6hJ$6rIQ`i{UyDCIY&e+WJGE~{){W>}a=cBR=Y8Hw zO4O3}A1P(9<(-1(&}}kPFGvMm?iI42b$x@^fswntH}6w;xW*{zQO^GQdkuZIR@AJK zIqRqwb8^YWS2_Ap$(OWJw9YAcFUVqjXgR;oAwJ)xw)ca(O9LN2Z*0ArJvFX!WodVA z>J0CI!v){ipQ95v*WRcy<~n&va%;XQT6iT%%YPgb#JcL}uQdOjht2c7z6(Rm#h>4q z#JoGcLVo491KqL%MrI%WGWJv|_hIg}`^WM=TN_n#pV`&T4S#fB{`S#37PED04315$ zrAA+^ni_kl+_Oi&Gp*S(PG8o(ePQ#qoQnq(2Z`nEc9&QqeMPS3)JfR}o#DYtR?qTt zR4(+?I(pVe-y-6XO)}%*Ldnz$R$kLRr6CJXuH;Le&F-6a>G=Uc&fO7(+$AK26suH@#o8jJ&rS4g)O zepI|Xlap0*Mde(Bb7FqZ>yGnlmardd)u}zupRl%aNz2!}j-1J-JZFv0o_cFv9>u$x zYw&bp-2oem>djUA?_3V7yx;nDoPWat~W2cV%vQK2Mup`&nUd&9&65^3?vNRfo^a zK5fx+*ctid=Pu42Q*eQM{B2GgYx||sXT{GxmE)bP*#7$7c(Yv&^+zihQDeZhYh#X}6c1iVH$~B*$D=X2{N6&)MDC&d&7r4Ct)v z!M$yl-tFn4D*1|cQocl) zOmjwFrb}(^?vnARZZ9*)?rgYt@q^~|3q=Vor#BktoY{BqLb-{=%__-_uC+43ZjYNporbbdy}2dK zrID?6Gu#fXaO?58mY5)P#Nl3`d=Pqn3QdQ898rWCzq>v z*T$;urkld<&G9;W*QTjGJ9NsPm7fvm`CjnkprEDvRdH>c&V!OuoO$yykJ#F$H3kRV z7!(om&EL#0Ad@x3tw~l&W~hp$X<(hbNz0XaQm5XAxGroB;27i%X=&SQSag=JnG&8X zm2TWKE$^#BeA0yh8MRU7rcvka?)S@&{gxw zCba}cl0vTaL2W_YCDWQB)ASPgez~oV-L@QB-#ux|t+_WS8M`V&hoCR)#K-e5v^OrEFs;yJ~Jg)JrXE*X-KaPVs3y6jWv@ zs%iJqF%5ZOp>4B+^DW@e5=;QhERz{9rQFn;k&?MjJt6Jsh(kB}4axiFaa`xgi8EH^ z@6uG_^jFE8;$CymIa=ST?SQhVQLh`o`NVPu#?$dfZu1Ij-}+sB!B%{vuY_N8h{#gmtc zpD_VYUlpHpVvEYevq{>ryV66h#^>7b#kJ?z_crB98LC-b9;BeK($^_aD$`1GhR z1&-{p<;zV=`lf2P&OfbiXx9<7EstKfQW_mjhHh1C_O@G5F4YsBIQ4Y?5;J3QmHuY- z4b8jyNeSJJx8zRin=43>Os^@QAJg(?Jg4Y5*C8b++$DYZXcZHIwv1GUw2tcnWh;)} zmP1j`*XKDL*q@@|b1`Aazz=14^^N68dkVhQvTI&8X{+WvxhQ|AyhAr3&dMs~R7^;@ z&Uybbwf3x30V|H@)eJOz+R$($yPX zy6x8QCOdb$g{JPl5UuCe#`oPD*{6?()?kg{vd4PA_1vL;w63U^fA&X}ksq#hZ%ge| zKB;?9Da2@^}B&~kDPVUJ)@sbHl1u=Z?=AD)tGA=){T~JKW}CG&fIcUysUY_ z=xG*W&K#5ZJ!g&Dxiom>gJKh7^$dpL%uDeGo9~@AstkBNLYeVcC*Vc$fQB|OTh z)~jQRrc9Zm+qn&sQy(9&zq~zlykzqUJL@T*Y**+M+T1j|xA>$I)YPr7m zbDlmz%y(vZp5=^l_hnq#3)W5>eI(a;iR#m-`7!t0o|*~fuw3e9`@CH>Yyaw#^BPl( z=MMfVK0nyb&HecBz$YU$V(Z%$o_l)o_Pb|c2WnoLpPu{bdriQL9ABg7(ee^ax)V*` zJ!dJt*}HqjTaQ*x!SJWg8{V#|Y&>d`@Y;Xw#c$nnnmg`Plz!jJ-Q77|GUH2crJ-M| zqcuM7zC5;lZf1B3)!^`^XPY^8WNR|Sr{T~OKkme_gyloMO5lLI>kpgiV@uNVO51nG9KXHOwELD_U!wM;W(VtRirCDO`%}ll5}>qX&25H{NhvIrX5|>YnPO zSKSMh&v;s%ewcM(>k%L3t)u&cK4&&AT5@8r%B17L$5f6TzcS#^`{n8fM>G!KA3iMEhw{&@xXC|t^P${n#gk)BPEcfL zC32?cR`vJ0pyuG79y%T#Dn0Jztzg~F$CriZE32zn?LYT*wR-vP-nRt< z_lB(>n{|bCOgeh}wREEsmg?)S&gnMBH~Z9Ts(iS!ssGkD?s6+O93*Uyz!O`8?@%=&G$eEZZ(e$9IAdmOf=U3TklFy!g(nNG_l1b-_1 zD82EX^`WJK9R=zm)5@nLX`j0~QEFYk;jn|CZHMYC3+=;J zvkbM8&+_-QRjNkZUU2OCVa5DqQcom{J>uu5hg7`O?0K#=BWJdwTAlfwqE{>ZV`A$U zmkn1aj&ukplULjucG9oZlUX{rCMVs|HaPWTM`dU7J0Itm84pHjD4ZWS`K*NXp#51* zS2X3;>|6dYtGAhN)iS+`MJXGD`nHbIZ4-~%p6rt{+-l9>jkDgKvGs73YnL+YGx>1c z!S}Z>eBV&_#(r21-*rb%-!}t8#1=L?2;4irXTmgYI~WhMh&k*)~#DH=-*V+c9(h`~FSp zTgHDoZkA!EJpV?-joa^EI{o=dgRI@2 zwY{1Z*n1rPrObCs&5s{w@^H(BZ6k*b`|hmkdVbq(L2bv{c?(sHpY({#Fd24BIbp(4 zajTbhxpB)`&+1bm=FI)neL}_DYYuyiivgc&C7S%q_CmoJj-o4Df>S(0Gsq;m9<}zZgnC;B?9;>6a?S)CY ziR?PfsX?oJdK|KRu&`)oaP81dmFFkOFqb!<%z3$apZtWy8YhSK8CPNH@HJ?*e#660 z#Z!G#4&KPh=*yG474380b5pH^ zSE8(k3fR)1#JuZ1mWmbKvv5Z-h&j0vV^B=ty%+=cO5|P?EXDHX_;5XW92Tvlz#11E z5*6z2>&IgmnwgE%H!?6B!J5eN4ASQYhljAnd-`*^Q7q3OZ`Neb&;XW=HhkKh zbTo?^5Jr9=#Deo20bAq03H5XTy|Btf_6z<^cO*R_zj2c#GE4u>v)|=G@^9?L!i)|7 zS@Q+##(Doe$a4Sp!bum|PyRREk@Q&q#!alqEaW%OewPOxzp>{GGb7}gxsUhg0p6C> zAWs4Nv&VlAn%VzeIQ1g?<^QHTlAhS#xJeh8CI9Bx@A9DFH}pOtSzf`Rq2VDsiVEc{4Cg=v&6~yL1o`s(Sl+>$Fji174?gkW3V*Qm zBTk{g!GSDZFe@ZH%#Y>e=NamWz(dhn|1QqI#-Z!=@t=)@e^7)c*Wa7P<_3EOuy|1+ z93)d{6vhh>g=NaV1VTDBnvV*x{KRoaX_U4G} zg|WgoydMwP$Oci?gmOYSp2&@^KxsGn`m8|zurU81Us446!9MzQBz{=p`Xhrpxx+<~ z`jg*XvH5d|e|CYQ^8O>8T`vB@l%&|lGnB>l^a_9uXtID^v|hlj00$3AR^}zE2_(SS|k_3b5DZyZLmr$lOBp6D{5)xD|2?kS5!iLh4U|1_jh*Rnk3^7%S zew3yJgQX%NL-m$mNcWIfPFYJ3_hN9r9PWD&_v*?LQpCNanuI5D@1Z2YB<{skB@Bss z0~HB*;$E(YL?P|ogDA{OI|E9Ts&p8oBGni7A%Fo+5-y;Wq_F)|+5=#LPX{ITV*zXM z^>~icN2F%~>fn>9?owlLzX*WFrA#@cEQJ$*r2T+F;IlyCf%F={0emyuGjZ<gDy}@rn_~URN4U7hV7vXou{Q_VJ_%om+KNEn7;9KDyg(y7(=s{T{Dcz+; z;64H{!SfpkADYV2J^;3t$Q%PD`MnCT2mc1{ar~F`d;prxGCL8z7w%&KOYn~nKDK*H z2LafAB9jLSjb`a}z!dNul(77#f>%cR<3#1Z5WFFt7r}oLUr(SP_`RSEU^!p|{wbc5 z_{;`+f!`o1fAqN0X5cGCQfRh8T=Qx zC*@D-On0QeSXBOD;86}TS48Dc@>CoAK~Q2p4j2diCESzpp93JDWwwaQe=+zm;O~pd zA03A@>b1;SP*R@~fl1&$!97XOOrYmaY5L9|tA*y$Y}g{}%2^`OgRXfZru5{}}L=;2(?1KM4FV@E1W9fOWtW@ZbJL`!9z7 zB)*6~pcnX!zqJ2KQThAh`CvRh4NBt62PS}TfqPP(f7SlW zMCH$codK|a6qMxGO27_$Bixhnp9g4x-ytghrQj{VKNOXJAb5T7xuEhu5-=J3SGXtT z|5xq5R8;<6u%iw8hd_z_IA9$3S8z|te-5Aleygbb7lR)IzDiX70pRt(p97Tz5`jtJ z+u)w0=darTZBhCA!p=b0KLJX@TMdi{-vsw0KfBt0nyCD{+JBv>{DWa+ySz-RsoFCRjen4#Z70QQQo`!l6i8IiX=jHdqga4>V{J&i${-cQKQIxQN{xB2? z`a)x>y%@6bB>~$x4|6IPF@C-(V3(H&*axnFzb0TC0QF}C?80mTTl}nmtpI$u40##$ zt?|sdK*0V46v6G@a{~4;AUQ|CJ_{7Ut`YdSLIFDm=!vkBFJNv6_pzYA)-A&SEq{~# z_pjc+f6L#0%irXE$pHr7eQ^YoysuUQcHsY(zyJLH{agP2^Z5I3`TNh~?~70~-8Cg@MFILwi{9mu1{>!CO;*}U37YaE+VHAXB3Sg!H@uZM@6vYBCBZ?fO zC=VbOC;*UwRP2Ao1L9V6{puWVSUL_E>Cy4P2%L@!dJZ~1s-PrJnDLX&_y8|~9>5l025=uR0nP#uz$ZWfSO-i2ZUMu9Odtq&2lN4U1M`7e zz!Jy@Vu0@e16U5&0EIw5U=QF4JOPw}6ksZF2QUOq0tSP1 zfNj8Rpaw7l&I3`vXMoh4m4F>k0t^5S036^2payIPrUUnYkw7*O4txaUfh1rua1+o6 zjstwf#0388(8uT=17-$%1 z3up_dET}AKB4{G$B+yBqWuRrCdZ2osM?sH*27m^DHi9;SYJh5h?f~5ZItO$P=tIzl zpkqMCfaZecf-VMK4Eh!HD=3+DlmcB1x*Bvm=y=dl&{EKWpaVe$XM)ZItpcqA9R)fH^c?6p&`8io&^FLEP(@Hh(Dk6}L7hOIKyQQI1|1GM z9P|X}3D98BV9+MeCeXg1eL>Se(?H!p-9hU>>p-nQtw1kb z01rS3a0U#35P;0fIsk(JKR_Lr1(*Vh0487y=m6e;D&Ptj13W++KEwgzfMP%!*avt4 z&j9rPm{OLJ>?R@0loOX1Q($0z`2XV7C07wy=09=~S*S}M>T)X%Ga{D}ke;(kJ|c1& z@wZD(A~GAvQ34_}5y*-_WH|!NX3zln4_#gH>7pb~KZC^WXLQB0i+07gi~btuzdD;p z_&kUMMGS9$FCON(J)zGc()NII1kT)tc8W-KrOTMsWBEy?#Xl%4+{ee?%byd(>r#nf z!vxdmLY)^fTN@bS$@6E!uLvlgARJ*#U*gQHPvqRJ8k~^@$OFBB0e~4`50GcSrt1f< z+Q6O+MUF`QNE2gLXm}9MKac}`3V&{RC}(sx%EsH9sNk>$gs}WPiINPcqaTJT ze-a56YleR)FWi$mHJlR~MLR@R_(1Js08~?=cu=hIMm`9clNN{i! z=?`5TvI4;}STtY}u{T|`j1UsW3HJ_Wg>s+;gIvI3LI|7&dj)g5as$B)BlYQ@xglyT zWVzvoU7QzY-Q2(qM6Vlx78i;ZISj3oiyyhBcut`v1o@zC2jP7{Ob5esP*6CRJD75w zHergZy}R8kXQwH4Q(WC`Cybxq>O%QiH?R*|3E?cd-zcK7KRw%r`%xmE1hx8Q#6byHtiDF2Id`|Mv|@f)x~qr&CUYaV@zV)U zQLzBa1|v0VimC_F0m{l9`cdvs_zDT*qXO=IJSA$}B9uHr@0_^Pcm<=nhUD9b%vY%HiC!eJDldpGqC z1hsy#(_k-Xa-Yk2_d$(yKL*H+qhjkvMHSnOqtdHa&NPk~M_rxb8(4UB9A%N>@qE^k zan@_I7ipbPvvqEIdjEOvNwypAO_sdf9BT`I=_`+4z4cVZPV*6m4&T%MG{MZ`P^;}X z#REpWwywP`ePPakalyyD2T5KfP4oAcDEyv564}`~8|^=SwrUV}GM#LsW$@V{a)q1u zrLbj>oz$Rk^83r(-JR>@PCAVcbW83&;Xz*1pN!ya{J3$WS%bz;nLe0hJj`sE0gI?@ z8;mp>$r?md2}9B21@S!5rvJA4cRu`GAO3C^fAnK=6X@)vxGt>i{;fXa=1M3}O59+ucfHTyRLyTb#_3&n>Xg9-534Vn5!XJ#8 z3uZ&YUxL8b!Vajj2i(Ct7D(sAe~de`fC8w9HV48S$Z`Xn2YVRJTd#q=ID{Dw{~(oS z5q}rpxgX-20RLd01sFuZ&MMel4*m?nUkCU5K$Bp%7SF2TR}I`e1hU``s@IqhrLv%c znVbp!1j0X#c)(5p>^Q?sc|H77W>B#z3@QZh04$NG_P`9l4_F8+2Kc~wU>9&4$Oejl zTR;u)3TOqym|~PN&!@8wdiH04srHAQjjP90Rg}i$F0@22=tMfTutM@B#P+ zFtPtZ9_Rt|1#|&@z!M(NCgf7IlyJ$Ht-zy2#8CHQA&U& zFc>faY=P;(0w4ld4Wt75fFnRIKxVPJR#tyr-IT-ZlLBTPg?g7{t(L6Qk~LbgK1NhiCi8)SAc^ z3>|2N(=J=C*cV2T5jhg&&hx}X8RZ)-oJ7No7nkE1in%oUHaLtt^WuWK|1fcngqgQL zQDr4J!6BR=P)@K9`A<*S`9}M2u>}k~g7Fd&cOeY}3HI?J$>_R4e&SZ>4Iw{xI;4=Yw@V?u%W1w#D5Mm2Am5bappgmE|lB0{@I03pI`^^N9naH6`9(9gnyMDdFF;dx{z zc49$cmfi=~MaPnjQX(^QPfGJAmXxS_mjPYsqK7}(8~>*w5j}^Ys7OQxqPp=D_rqVZ z=HC^DGhG!#wuDvTXU3?@-X9f1^!U#eqsuS~GXOu`I|q~9d?JJCK~PZ+BrOQ@1R~XB zD%y@NUefBu!31&18T{SUksInN9{*xKE2i`3( z``x9fg7*aA2zUSyz*=A@kOdS0kAOFTba%W10As)wa07V224Fjo3FHCQz-!GAxrUpM+6(j+B5 zA>y+6ii3;z2dmUjamQd!Z%2Q2DAtl@;v0VAlf$_@f8xwFc&5KM zXB;*mQyazUB^PH-C_NvI4Zd_VIC!Hm(KAjD@}tw_ZMVpa6GGNZ5O3rv#bdf~$=h`W z)0OTEakxcSX5#Z#uG}yrYKA8_oI`D4{-r0>S*B>+2X4t44n>{sGNGeIK^p9es%!9% z_(KkIcgL4Ng0YF)p9h)8-93=)?iC*D9_Wc2*+{uVWbk#TA5v#1clsqwK~usV@8F=ocr|kLk${4&_n$Oiy00KfYALL^Xw5j9-{O^qbp- z=@ZJ~AYM#g)a0NDidxMii&R{WS1{p{n1Lb}8=2Vb?&TLsQJd*Ih*OZLVMc@oDvJps zbO^Z`3x%}JVsa;xKBz0?9-B2N>KeHV@(K*0#3UlU!e}!Ua>s*s7)ClZ^e6uxVv^mo zDRzz{jA#)R!Kosw{|N{Ti|`8Nb;XMGsDEGoqjEs$r#(Jcch2hmPu8XXM@9Va$o!Xb zz~D7o6HvlhyE^MNdhEZi|4lj2HUCHET$GS-bxeVg^#5$m0FUMSe=wI}Voe{m_jOAaHrrs z%>I0>g#iQp@t_gn58V%6_~sAo4-R||g61T|5Xz6XV}SV`1I+9YY6noz9_a(OUG{C^ zCXCiB@rSk;hM{na7dWnH_~%ctDHdFK;)y5jyzn#-_Cje_IH!fS%@WxRg`H67HBy*k zlKd%*8L%CSQ2y}S5HnClfGO-6L(7Um$D2pn3xY3Ph(T=F1X0CzTY$RrgM=Eq2UokU@g+$Ztv%1^@mb-agAMBmpLZiC@t zIP#PCQ%e6xD}q5>Ngn>$?youdb3QJD3kK3mN{GZD2!0b$%N{17NJAh^Ik+QnCUqnf zW~5}hN-+X=q?CBDL-LS^d>M_I!r{<)B)?%l%3>IN;Nbai_-_j^P{T=Hb>+ezwGbL3 zbPaaJQrNgIT$$^xf#V7B^VVOnHeuP-e8<+yvz8Qakg=Z z@mw>_(aPpC&C|_~o1Zh!H!nATZ2rppow=BWqD3zYmW7dpmBj=LXA5tOg%*n~R#N7SfiAmOU)}EJH1$EMqNCS|Wlh$gvH#U>G>V@8i2b6`w2%kclx-5LM3d6aS7ZawOD?&`KKN<&nI zEmOUbvb*QGd*6HCyVq|zqAg6B$f#E$h(s1L2oSL_GUhUCby1)JLhFqnMI$SwOSLeC z&P8TKZIIF}Wmy%`jAbKaDFl>FSr?EyJV>{6<8kvR@EiW+?33)f`##V2bMLFi@B1bK zt!vkZe4p*)=lQ3_CGny>k$5&S>CgC-800Vd-z2Z+ZSVwc79f%$CyvQ;)(z^Id&=9D zc(Dwy%(ZC;Ze)9S8~+W|Sf8_htE_~V*p~?UPx*oD+89r>hw+yf7r(Ioq&7G^oT#}k z5y-8rV+-`bNw^Vjb?$O<<#puO`v1+Z^6l_2K8pSLdKqlvYh!(a?dAW0MVu1_dA~Yo zu9`;gNcnry3VJobTh8`E|GxAH&mf*nZiLsGpW$v_PjN)Lf9Wq{~|}P+S{p zzj#Nimxtu_R;3lEdQCaw%dxlu>v1z?y)P%eo(M#Pf%3EHZQjCr_#(fL=KU(X4-vc* zzlaC$BVs$Lq{Q8nA-@wBMO1!Vw#mctF?mkzu=ZHTt+Upv*1WZ1ZL)XSmc7^hf}OUH z*gvrc>}TyU`@DU@p0_XCAJ`$aRoSXZ?N<+|htv;LR-I5I>d&gEHaRgzI!Wgt=bSU= z6rGT})xF8R&Ar3j@80hobRTz*yQkgP+)M5iH>fx23hnAT{SDo%AJvC-pZ=N7>0y0J zpV4RadHuRx)$2^y>@d4cqxr0P#N;WLUobD3*UY>LdpCKvc(-{;@AKXP@1S?od(Qj4 zcfp(U-tgY`-t|88wkLKbE+#G~K1^KaNBpn)2mBxVkNeO0FZeI}v;Ld@6+ciNytW5y zV4GQt?IZU+z`n=&*)aPRdz%IM7QTbmkO$lNA$~n(6l!G zMo@SU9>c#_|FlZherLdW%DL#g>7f3W-ewM(!{&&YGjExax$139M9CY$z$lFs<~Q(4 z{z+~VBkrYHKFA;8NBICB;ivd%K2E&2%-`qh$ZwT!Gawka7uw*P@FN(8Gw?k8f%0Pm zZovxNg?D2&9>pP?###I;t`{4{39G{1ZSS!^Wj|>@W1q3l+9i9PI+S=L@sGr6Vw?X_ z{}x~QxBGYaZT{E%2mSB(-}Qe;3P0f=_n+~9?Vt9a_s{!(^ymD)`)0l?ja3ryZe_q+c00R^eE=~mUx-#_M~I?P!Q!lz)w534#RB&;gy$1>KN>G-RL$ddZVn=!XFqgd7Y}6h5a% zgejPY8JLB6Sb#-Xf@LT|iAcFhrLqu)F@jNyQM{_K8f!3)wa8GQLW6Z!j}6#}O_;=H zY{6D+#}4eoE{bak)0n{??8QFJ60Zhu5QlLD^H{)99K&&(z)75<*w0Y(=WziSaS4~P zh$URXRVvbjL|8;bRK!Gus1ntpM#M#}U_ua4jHna!qCqr@CZce&Xc4WVU37>}(IvV? zN~A?b^oU;3C$gfScBw%k^^h2*y(%vXVpNQYaWNq##gv#9Gh$ZEiv_VLmc+6sijr6n zt5hNk$*_#bsEo-9StYAwjf~4$$)u1<8d)dnWrJ*#O)@E)Ws7W;?Xp95$}ZV0Q!*_x zvPbsHKADyMazGBsoE(zFazy53L5|8XIW8yUq@0q|a)!t|PwZWkOLAEjWl65cRVq-1 ztgscaqE^i6Qr#-0(ki2RRIlnI`t_>;HK=lGNDUJQ^Qxdm%Pb!cUOO)T-!!J*nGOaP zscCiEoernd>2kWAl#_NcPLGpw2Hl)nbW84vyGq5=kPhpJj_MeZwMtj(8XecQnrWex zHbmNb-JlzFlTPYp-J)A{yYA4Px{LUm(rKO1J-U}DoYnn$Ko1g&hls`_I + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/VisualC/showimage/showimage_VS2010.vcxproj b/src/SDL2/VisualC/showimage/showimage_VS2010.vcxproj new file mode 100644 index 000000000..5b27b68bf --- /dev/null +++ b/src/SDL2/VisualC/showimage/showimage_VS2010.vcxproj @@ -0,0 +1,285 @@ + + + + + Debug + Win32 + + + Debug + x64 + + + Release + Win32 + + + Release + x64 + + + + showimage + {FEE80C5D-762E-4E57-9BCB-928749E8203F} + + + + Application + false + + + Application + false + + + Application + false + + + Application + false + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.40219.1 + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + true + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + true + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + false + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Win32 + .\Debug/showimage.tlb + + + + + ..\..\..\SDL\include;%(AdditionalIncludeDirectories) + Disabled + WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions) + true + MultiThreadedDebugDLL + .\Debug/showimage.pch + Level3 + true + EditAndContinue + Default + + + _DEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + true + .\Debug/showimage.pdb + Windows + MachineX86 + + + true + .\Debug/showimage.bsc + + + copy /Y "..\..\..\SDL\VisualC\SDL\$(Platform)\$(Configuration)\SDL2.dll" "$(TargetDir)\SDL2.dll" +copy /Y "..\$(Configuration)\SDL2_image.dll" "$(TargetDir)\SDL2_image.dll" + + Copy SDL and data files + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + X64 + .\Debug/showimage.tlb + + + + + ..\..\..\SDL\include;%(AdditionalIncludeDirectories) + Disabled + WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions) + true + MultiThreadedDebugDLL + .\Debug/showimage.pch + Level3 + true + ProgramDatabase + Default + + + _DEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + true + .\Debug/showimage.pdb + Windows + MachineX64 + + + true + .\Debug/showimage.bsc + + + copy /Y "..\..\..\SDL\VisualC\SDL\$(Platform)\$(Configuration)\SDL2.dll" "$(TargetDir)\SDL2.dll" +copy /Y "..\$(Configuration)\SDL2_image.dll" "$(TargetDir)\SDL2_image.dll" + + Copy SDL and data files + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + .\Release/showimage.tlb + + + + + ..\..\..\SDL\include;%(AdditionalIncludeDirectories) + MaxSpeed + OnlyExplicitInline + WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions) + true + MultiThreadedDLL + true + .\Release/showimage.pch + Level3 + true + Default + + + NDEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + .\Release/showimage.pdb + Windows + MachineX86 + + + true + .\Release/showimage.bsc + + + copy /Y "..\..\..\SDL\VisualC\SDL\$(Platform)\$(Configuration)\SDL2.dll" "$(TargetDir)\SDL2.dll" +copy /Y "..\$(Configuration)\SDL2_image.dll" "$(TargetDir)\SDL2_image.dll" + + Copy SDL and data files + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + .\Release/showimage.tlb + + + + + ..\..\..\SDL\include;%(AdditionalIncludeDirectories) + MaxSpeed + OnlyExplicitInline + WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions) + true + MultiThreadedDLL + true + .\Release/showimage.pch + Level3 + true + Default + + + NDEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + .\Release/showimage.pdb + Windows + MachineX64 + + + true + .\Release/showimage.bsc + + + copy /Y "..\..\..\SDL\VisualC\SDL\$(Platform)\$(Configuration)\SDL2.dll" "$(TargetDir)\SDL2.dll" +copy /Y "..\$(Configuration)\SDL2_image.dll" "$(TargetDir)\SDL2_image.dll" + + Copy SDL and data files + + + + + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + + + + + {2bd5534e-00e2-4bea-ac96-d9a92ea24696} + false + + + + + + + + + + diff --git a/src/SDL2/VisualC/showimage/showimage_VS2012.vcxproj b/src/SDL2/VisualC/showimage/showimage_VS2012.vcxproj new file mode 100644 index 000000000..be349094d --- /dev/null +++ b/src/SDL2/VisualC/showimage/showimage_VS2012.vcxproj @@ -0,0 +1,281 @@ + + + + + Debug + Win32 + + + Debug + x64 + + + Release + Win32 + + + Release + x64 + + + + showimage + {FEE80C5D-762E-4E57-9BCB-928749E8203F} + + + + Application + false + v110 + + + Application + false + v110 + + + Application + false + v110 + + + Application + false + v110 + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.40219.1 + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + true + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + true + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + false + $(Platform)\$(Configuration)\ + $(Platform)\$(Configuration)\ + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Win32 + .\Debug/showimage.tlb + + + + + ..\..\..\SDL\include;%(AdditionalIncludeDirectories) + Disabled + WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions) + true + MultiThreadedDebugDLL + Level3 + true + EditAndContinue + Default + + + _DEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + true + Windows + MachineX86 + + + true + .\Debug/showimage.bsc + + + copy /Y "..\..\..\SDL\VisualC\SDL\$(Platform)\$(Configuration)\SDL2.dll" "$(TargetDir)\SDL2.dll" +copy /Y "..\$(Platform)\$(Configuration)\SDL2_image.dll" "$(TargetDir)\SDL2_image.dll" + + Copy SDL and data files + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + X64 + .\Debug/showimage.tlb + + + + + ..\..\..\SDL\include;%(AdditionalIncludeDirectories) + Disabled + WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions) + true + MultiThreadedDebugDLL + Level3 + true + ProgramDatabase + Default + + + _DEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + true + Windows + MachineX64 + + + true + .\Debug/showimage.bsc + + + copy /Y "..\..\..\SDL\VisualC\SDL\$(Platform)\$(Configuration)\SDL2.dll" "$(TargetDir)\SDL2.dll" +copy /Y "..\$(Platform)\$(Configuration)\SDL2_image.dll" "$(TargetDir)\SDL2_image.dll" + + Copy SDL and data files + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + .\Release/showimage.tlb + + + + + ..\..\..\SDL\include;%(AdditionalIncludeDirectories) + MaxSpeed + OnlyExplicitInline + WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions) + true + MultiThreadedDLL + true + Level3 + true + Default + + + NDEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + Windows + MachineX86 + + + true + .\Release/showimage.bsc + + + copy /Y "..\..\..\SDL\VisualC\SDL\$(Platform)\$(Configuration)\SDL2.dll" "$(TargetDir)\SDL2.dll" +copy /Y "..\$(Platform)\$(Configuration)\SDL2_image.dll" "$(TargetDir)\SDL2_image.dll" + + Copy SDL and data files + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + .\Release/showimage.tlb + + + + + ..\..\..\SDL\include;%(AdditionalIncludeDirectories) + MaxSpeed + OnlyExplicitInline + WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions) + true + MultiThreadedDLL + true + Level3 + true + Default + + + NDEBUG;%(PreprocessorDefinitions) + 0x0409 + + + %(AdditionalDependencies) + Windows + MachineX64 + + + true + .\Release/showimage.bsc + + + copy /Y "..\..\..\SDL\VisualC\SDL\$(Platform)\$(Configuration)\SDL2.dll" "$(TargetDir)\SDL2.dll" +copy /Y "..\$(Platform)\$(Configuration)\SDL2_image.dll" "$(TargetDir)\SDL2_image.dll" + + Copy SDL and data files + + + + + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + %(PreprocessorDefinitions) + + + + + {2bd5534e-00e2-4bea-ac96-d9a92ea24696} + false + + + + + + + + + + diff --git a/src/SDL2/VisualCE/SDL_image.dsp b/src/SDL2/VisualCE/SDL_image.dsp new file mode 100644 index 000000000..b5a5953ec --- /dev/null +++ b/src/SDL2/VisualCE/SDL_image.dsp @@ -0,0 +1,164 @@ +# Microsoft Developer Studio Project File - Name="SDL_image" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 5.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102 + +CFG=SDL_image - Win32 Release +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "SDL_image.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "SDL_image.mak" CFG="SDL_image - Win32 Release" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "SDL_image - Win32 Release" (based on\ + "Win32 (x86) Dynamic-Link Library") +!MESSAGE "SDL_image - Win32 Debug" (based on\ + "Win32 (x86) Dynamic-Link Library") +!MESSAGE + +# Begin Project +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +MTL=midl.exe +RSC=rc.exe + +!IF "$(CFG)" == "SDL_image - Win32 Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "Release" +# PROP BASE Intermediate_Dir "Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Release" +# PROP Intermediate_Dir "Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c +# ADD CPP /nologo /MD /W3 /GX /O2 /I "graphics\include" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "LOAD_BMP" /D "LOAD_GIF" /D "LOAD_JPG" /D LOAD_JPG_DYNAMIC=\"jpeg.dll\" /D "LOAD_LBM" /D "LOAD_PCX" /D "LOAD_PNG" /D LOAD_PNG_DYNAMIC=\"libpng12-0.dll\" /D "LOAD_PNM" /D "LOAD_TGA" /D "LOAD_TIF" /D LOAD_TIF_DYNAMIC=\"libtiff-3.dll\" /D "LOAD_XPM" /D "LOAD_XV" /D "PNG_USE_DLL" /D "ZLIB_DLL" /YX /FD /c +# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32 +# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32 +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /machine:I386 +# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib SDL.lib /nologo /subsystem:windows /dll /machine:I386 + +!ELSEIF "$(CFG)" == "SDL_image - Win32 Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "Debug" +# PROP BASE Intermediate_Dir "Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Debug" +# PROP Intermediate_Dir "Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /FD /c +# ADD CPP /nologo /MD /W3 /Gm /GX /Zi /Od /I "graphics\include" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "LOAD_BMP" /D "LOAD_GIF" /D "LOAD_JPG" /D LOAD_JPG_DYNAMIC=\"jpeg.dll\" /D "LOAD_LBM" /D "LOAD_PCX" /D "LOAD_PNG" /D LOAD_PNG_DYNAMIC=\"libpng12-0.dll\" /D "LOAD_PNM" /D "LOAD_TGA" /D "LOAD_TIF" /D LOAD_TIF_DYNAMIC=\"libtiff-3.dll\" /D "LOAD_XPM" /D "LOAD_XV" /D "PNG_USE_DLL" /D "ZLIB_DLL" /YX /FD /c +# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32 +# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32 +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /debug /machine:I386 /pdbtype:sept +# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib SDL.lib /nologo /subsystem:windows /dll /debug /machine:I386 /pdbtype:sept + +!ENDIF + +# Begin Target + +# Name "SDL_image - Win32 Release" +# Name "SDL_image - Win32 Debug" +# Begin Group "SDL_image Sources" + +# PROP Default_Filter "" +# Begin Source File + +SOURCE=..\IMG.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_bmp.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_gif.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_jpg.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_lbm.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_pcx.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_png.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_pnm.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_tga.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_tif.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_xcf.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_xpm.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_xv.c +# End Source File +# Begin Source File + +SOURCE=..\IMG_xxx.c +# End Source File +# Begin Source File + +SOURCE=Version.rc +# End Source File +# End Group +# Begin Group "SDL_image Headers" + +# PROP Default_Filter "" +# Begin Source File + +SOURCE=..\SDL_image.h +# End Source File +# End Group +# End Target +# End Project diff --git a/src/SDL2/VisualCE/SDL_image.dsw b/src/SDL2/VisualCE/SDL_image.dsw new file mode 100644 index 000000000..28d1f4354 --- /dev/null +++ b/src/SDL2/VisualCE/SDL_image.dsw @@ -0,0 +1,41 @@ +Microsoft Developer Studio Workspace File, Format Version 5.00 +# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE! + +############################################################################### + +Project: "SDL_image"=".\SDL_image.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "showimage"=".\showimage\showimage.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Global: + +Package=<5> +{{{ +}}} + +Package=<3> +{{{ +}}} + +############################################################################### + diff --git a/src/SDL2/VisualCE/SDL_image.sln b/src/SDL2/VisualCE/SDL_image.sln new file mode 100644 index 000000000..10a12fb2c --- /dev/null +++ b/src/SDL2/VisualCE/SDL_image.sln @@ -0,0 +1,30 @@ + +Microsoft Visual Studio Solution File, Format Version 9.00 +# Visual Studio 2005 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "SDL_image", "SDL_image.vcproj", "{2BD5534E-00E2-4BEA-AC96-D9A92EA24696}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Pocket PC 2003 (ARMV4) = Debug|Pocket PC 2003 (ARMV4) + Debug|Windows Mobile 5.0 Pocket PC SDK (ARMV4I) = Debug|Windows Mobile 5.0 Pocket PC SDK (ARMV4I) + Release|Pocket PC 2003 (ARMV4) = Release|Pocket PC 2003 (ARMV4) + Release|Windows Mobile 5.0 Pocket PC SDK (ARMV4I) = Release|Windows Mobile 5.0 Pocket PC SDK (ARMV4I) + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Pocket PC 2003 (ARMV4).ActiveCfg = Debug|Pocket PC 2003 (ARMV4) + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Pocket PC 2003 (ARMV4).Build.0 = Debug|Pocket PC 2003 (ARMV4) + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Pocket PC 2003 (ARMV4).Deploy.0 = Debug|Pocket PC 2003 (ARMV4) + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Windows Mobile 5.0 Pocket PC SDK (ARMV4I).ActiveCfg = Debug|Windows Mobile 5.0 Pocket PC SDK (ARMV4I) + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Windows Mobile 5.0 Pocket PC SDK (ARMV4I).Build.0 = Debug|Windows Mobile 5.0 Pocket PC SDK (ARMV4I) + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Debug|Windows Mobile 5.0 Pocket PC SDK (ARMV4I).Deploy.0 = Debug|Windows Mobile 5.0 Pocket PC SDK (ARMV4I) + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|Pocket PC 2003 (ARMV4).ActiveCfg = Release|Pocket PC 2003 (ARMV4) + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|Pocket PC 2003 (ARMV4).Build.0 = Release|Pocket PC 2003 (ARMV4) + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|Pocket PC 2003 (ARMV4).Deploy.0 = Release|Pocket PC 2003 (ARMV4) + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|Windows Mobile 5.0 Pocket PC SDK (ARMV4I).ActiveCfg = Release|Windows Mobile 5.0 Pocket PC SDK (ARMV4I) + {2BD5534E-00E2-4BEA-AC96-D9A92EA24696}.Release|Windows Mobile 5.0 Pocket PC SDK (ARMV4I).Deploy.0 = Release|Windows Mobile 5.0 Pocket PC SDK (ARMV4I) + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal + diff --git a/src/SDL2/VisualCE/SDL_image.vcproj b/src/SDL2/VisualCE/SDL_image.vcproj new file mode 100644 index 000000000..30e8be651 --- /dev/null +++ b/src/SDL2/VisualCE/SDL_image.vcproj @@ -0,0 +1,343 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/VisualCE/Version.rc b/src/SDL2/VisualCE/Version.rc new file mode 100644 index 000000000..97a9f2153 --- /dev/null +++ b/src/SDL2/VisualCE/Version.rc @@ -0,0 +1,106 @@ +//Microsoft Developer Studio generated resource script. +// +#include "resource.h" + +#define APSTUDIO_READONLY_SYMBOLS +///////////////////////////////////////////////////////////////////////////// +// +// Generated from the TEXTINCLUDE 2 resource. +// +#include "windows.h" +#include "resdefce.h" + +///////////////////////////////////////////////////////////////////////////// +#undef APSTUDIO_READONLY_SYMBOLS + +///////////////////////////////////////////////////////////////////////////// +// English (U.S.) resources + +#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_ENU) +#ifdef _WIN32 +LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US +#pragma code_page(1252) +#endif //_WIN32 + +#ifndef _MAC +///////////////////////////////////////////////////////////////////////////// +// +// Version +// + +VS_VERSION_INFO VERSIONINFO + FILEVERSION 1,2,11,0 + PRODUCTVERSION 1,2,11,0 + FILEFLAGSMASK 0x3fL +#ifdef _DEBUG + FILEFLAGS 0x1L +#else + FILEFLAGS 0x0L +#endif + FILEOS 0x40004L + FILETYPE 0x2L + FILESUBTYPE 0x0L +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904b0" + BEGIN + VALUE "CompanyName", "\0" + VALUE "FileDescription", "SDL_image\0" + VALUE "FileVersion", "1, 2, 11, 0\0" + VALUE "InternalName", "SDL_image\0" + VALUE "LegalCopyright", "Copyright © 2013 Sam Lantinga\0" + VALUE "OriginalFilename", "SDL_image.dll\0" + VALUE "ProductName", "Simple DirectMedia Layer\0" + VALUE "ProductVersion", "1, 2, 11, 0\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x409, 1200 + END +END + +#endif // !_MAC + + +#ifdef APSTUDIO_INVOKED +///////////////////////////////////////////////////////////////////////////// +// +// TEXTINCLUDE +// + +1 TEXTINCLUDE DISCARDABLE +BEGIN + "resource.h\0" +END + +2 TEXTINCLUDE DISCARDABLE +BEGIN + "#include ""afxres.h""\r\n" + "\0" +END + +3 TEXTINCLUDE DISCARDABLE +BEGIN + "\r\n" + "\0" +END + +#endif // APSTUDIO_INVOKED + +#endif // English (U.S.) resources +///////////////////////////////////////////////////////////////////////////// + + + +#ifndef APSTUDIO_INVOKED +///////////////////////////////////////////////////////////////////////////// +// +// Generated from the TEXTINCLUDE 3 resource. +// + + +///////////////////////////////////////////////////////////////////////////// +#endif // not APSTUDIO_INVOKED + diff --git a/src/SDL2/VisualCE/clean.sh b/src/SDL2/VisualCE/clean.sh new file mode 100644 index 000000000..f90a11e97 --- /dev/null +++ b/src/SDL2/VisualCE/clean.sh @@ -0,0 +1,5 @@ +find . -type d -name 'Debug' -exec rm -rv {} \; +find . -type d -name 'Release' -exec rm -rv {} \; +find . -type f -name '*.user' -exec rm -v {} \; +find . -type f -name '*.ncb' -exec rm -v {} \; +find . -type f -name '*.suo' -exec rm -v {} \; diff --git a/src/SDL2/VisualCE/resource.h b/src/SDL2/VisualCE/resource.h new file mode 100644 index 000000000..7c822cff2 --- /dev/null +++ b/src/SDL2/VisualCE/resource.h @@ -0,0 +1,15 @@ +//{{NO_DEPENDENCIES}} +// Microsoft Developer Studio generated include file. +// Used by Version.rc +// + +// Next default values for new objects +// +#ifdef APSTUDIO_INVOKED +#ifndef APSTUDIO_READONLY_SYMBOLS +#define _APS_NEXT_RESOURCE_VALUE 101 +#define _APS_NEXT_COMMAND_VALUE 40001 +#define _APS_NEXT_CONTROL_VALUE 1000 +#define _APS_NEXT_SYMED_VALUE 101 +#endif +#endif diff --git a/src/SDL2/VisualCE/showimage/showimage.dsp b/src/SDL2/VisualCE/showimage/showimage.dsp new file mode 100644 index 000000000..0a54a0df4 --- /dev/null +++ b/src/SDL2/VisualCE/showimage/showimage.dsp @@ -0,0 +1,106 @@ +# Microsoft Developer Studio Project File - Name="showimage" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 5.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) Application" 0x0101 + +CFG=showimage - Win32 Debug +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "showimage.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "showimage.mak" CFG="showimage - Win32 Debug" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "showimage - Win32 Release" (based on "Win32 (x86) Application") +!MESSAGE "showimage - Win32 Debug" (based on "Win32 (x86) Application") +!MESSAGE + +# Begin Project +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +MTL=midl.exe +RSC=rc.exe + +!IF "$(CFG)" == "showimage - Win32 Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "Release" +# PROP BASE Intermediate_Dir "Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Release" +# PROP Intermediate_Dir "Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c +# ADD CPP /nologo /MD /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c +# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32 +# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32 +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /machine:I386 +# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib SDL.lib SDLmain.lib /nologo /subsystem:windows /machine:I386 + +!ELSEIF "$(CFG)" == "showimage - Win32 Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "Debug" +# PROP BASE Intermediate_Dir "Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Debug" +# PROP Intermediate_Dir "Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /FD /c +# ADD CPP /nologo /MD /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /FD /c +# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32 +# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32 +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept +# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib SDL.lib SDLmain.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept + +!ENDIF + +# Begin Target + +# Name "showimage - Win32 Release" +# Name "showimage - Win32 Debug" +# Begin Group "Showimage Sources" + +# PROP Default_Filter "" +# Begin Source File + +SOURCE=..\..\showimage.c +# End Source File +# End Group +# Begin Group "External Libraries" + +# PROP Default_Filter "" +# Begin Source File + +SOURCE=..\Release\SDL_image.lib +# End Source File +# End Group +# End Target +# End Project diff --git a/src/SDL2/VisualCE/showimage/showimage.sln b/src/SDL2/VisualCE/showimage/showimage.sln new file mode 100644 index 000000000..b3d41d8d8 --- /dev/null +++ b/src/SDL2/VisualCE/showimage/showimage.sln @@ -0,0 +1,20 @@ + +Microsoft Visual Studio Solution File, Format Version 10.00 +# Visual Studio 2008 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "showimage", "showimage.vcproj", "{FEE80C5D-762E-4E57-9BCB-928749E8203F}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Win32 = Debug|Win32 + Release|Win32 = Release|Win32 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|Win32.ActiveCfg = Debug|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Debug|Win32.Build.0 = Debug|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|Win32.ActiveCfg = Release|Win32 + {FEE80C5D-762E-4E57-9BCB-928749E8203F}.Release|Win32.Build.0 = Release|Win32 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/SDL2/VisualCE/showimage/showimage.vcproj b/src/SDL2/VisualCE/showimage/showimage.vcproj new file mode 100644 index 000000000..0e6d8ffc1 --- /dev/null +++ b/src/SDL2/VisualCE/showimage/showimage.vcproj @@ -0,0 +1,68 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/Xcode-iOS/SDL_image.xcodeproj/project.pbxproj b/src/SDL2/Xcode-iOS/SDL_image.xcodeproj/project.pbxproj new file mode 100755 index 000000000..1f477de1b --- /dev/null +++ b/src/SDL2/Xcode-iOS/SDL_image.xcodeproj/project.pbxproj @@ -0,0 +1,316 @@ +// !$*UTF8*$! +{ + archiveVersion = 1; + classes = { + }; + objectVersion = 46; + objects = { + +/* Begin PBXBuildFile section */ + 00A06D7812FFBFD5009F1A11 /* SDL_image.h in Headers */ = {isa = PBXBuildFile; fileRef = 1014BAEA010A4B677F000001 /* SDL_image.h */; }; + AA126A9A1617A4A4005ABC8F /* IMG_bmp.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A891617A4A4005ABC8F /* IMG_bmp.c */; }; + AA126A9B1617A4A4005ABC8F /* IMG_gif.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A8A1617A4A4005ABC8F /* IMG_gif.c */; }; + AA126A9C1617A4A4005ABC8F /* IMG_ImageIO.m in Sources */ = {isa = PBXBuildFile; fileRef = AA126A8B1617A4A4005ABC8F /* IMG_ImageIO.m */; }; + AA126A9D1617A4A4005ABC8F /* IMG_jpg.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A8C1617A4A4005ABC8F /* IMG_jpg.c */; }; + AA126A9E1617A4A4005ABC8F /* IMG_lbm.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A8D1617A4A4005ABC8F /* IMG_lbm.c */; }; + AA126A9F1617A4A4005ABC8F /* IMG_pcx.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A8E1617A4A4005ABC8F /* IMG_pcx.c */; }; + AA126AA01617A4A4005ABC8F /* IMG_png.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A8F1617A4A4005ABC8F /* IMG_png.c */; }; + AA126AA11617A4A4005ABC8F /* IMG_pnm.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A901617A4A4005ABC8F /* IMG_pnm.c */; }; + AA126AA21617A4A4005ABC8F /* IMG_tga.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A911617A4A4005ABC8F /* IMG_tga.c */; }; + AA126AA31617A4A4005ABC8F /* IMG_tif.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A921617A4A4005ABC8F /* IMG_tif.c */; }; + AA126AA51617A4A4005ABC8F /* IMG_webp.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A941617A4A4005ABC8F /* IMG_webp.c */; }; + AA126AA61617A4A4005ABC8F /* IMG_xcf.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A951617A4A4005ABC8F /* IMG_xcf.c */; }; + AA126AA71617A4A4005ABC8F /* IMG_xpm.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A961617A4A4005ABC8F /* IMG_xpm.c */; }; + AA126AA81617A4A4005ABC8F /* IMG_xv.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A971617A4A4005ABC8F /* IMG_xv.c */; }; + AA126AA91617A4A4005ABC8F /* IMG_xxx.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A981617A4A4005ABC8F /* IMG_xxx.c */; }; + AA126AAA1617A4A4005ABC8F /* IMG.c in Sources */ = {isa = PBXBuildFile; fileRef = AA126A991617A4A4005ABC8F /* IMG.c */; }; +/* End PBXBuildFile section */ + +/* Begin PBXFileReference section */ + 1014BAEA010A4B677F000001 /* SDL_image.h */ = {isa = PBXFileReference; fileEncoding = 30; lastKnownFileType = sourcecode.c.h; name = SDL_image.h; path = ../SDL_image.h; sourceTree = SOURCE_ROOT; }; + AA126A891617A4A4005ABC8F /* IMG_bmp.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_bmp.c; path = ../IMG_bmp.c; sourceTree = ""; }; + AA126A8A1617A4A4005ABC8F /* IMG_gif.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_gif.c; path = ../IMG_gif.c; sourceTree = ""; }; + AA126A8B1617A4A4005ABC8F /* IMG_ImageIO.m */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.objc; name = IMG_ImageIO.m; path = ../IMG_ImageIO.m; sourceTree = ""; }; + AA126A8C1617A4A4005ABC8F /* IMG_jpg.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_jpg.c; path = ../IMG_jpg.c; sourceTree = ""; }; + AA126A8D1617A4A4005ABC8F /* IMG_lbm.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_lbm.c; path = ../IMG_lbm.c; sourceTree = ""; }; + AA126A8E1617A4A4005ABC8F /* IMG_pcx.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_pcx.c; path = ../IMG_pcx.c; sourceTree = ""; }; + AA126A8F1617A4A4005ABC8F /* IMG_png.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_png.c; path = ../IMG_png.c; sourceTree = ""; }; + AA126A901617A4A4005ABC8F /* IMG_pnm.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_pnm.c; path = ../IMG_pnm.c; sourceTree = ""; }; + AA126A911617A4A4005ABC8F /* IMG_tga.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_tga.c; path = ../IMG_tga.c; sourceTree = ""; }; + AA126A921617A4A4005ABC8F /* IMG_tif.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_tif.c; path = ../IMG_tif.c; sourceTree = ""; }; + AA126A941617A4A4005ABC8F /* IMG_webp.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_webp.c; path = ../IMG_webp.c; sourceTree = ""; }; + AA126A951617A4A4005ABC8F /* IMG_xcf.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_xcf.c; path = ../IMG_xcf.c; sourceTree = ""; }; + AA126A961617A4A4005ABC8F /* IMG_xpm.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_xpm.c; path = ../IMG_xpm.c; sourceTree = ""; }; + AA126A971617A4A4005ABC8F /* IMG_xv.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_xv.c; path = ../IMG_xv.c; sourceTree = ""; }; + AA126A981617A4A4005ABC8F /* IMG_xxx.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_xxx.c; path = ../IMG_xxx.c; sourceTree = ""; }; + AA126A991617A4A4005ABC8F /* IMG.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG.c; path = ../IMG.c; sourceTree = ""; }; + BE1FA74107AF4C45004B6283 /* libSDL2_image.a */ = {isa = PBXFileReference; explicitFileType = archive.ar; includeInIndex = 0; path = libSDL2_image.a; sourceTree = BUILT_PRODUCTS_DIR; }; +/* End PBXFileReference section */ + +/* Begin PBXFrameworksBuildPhase section */ + BE1FA73F07AF4C45004B6283 /* Frameworks */ = { + isa = PBXFrameworksBuildPhase; + buildActionMask = 2147483647; + files = ( + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXFrameworksBuildPhase section */ + +/* Begin PBXGroup section */ + 0153844A006D81B07F000001 /* Public Headers */ = { + isa = PBXGroup; + children = ( + 1014BAEA010A4B677F000001 /* SDL_image.h */, + ); + name = "Public Headers"; + sourceTree = ""; + }; + 034768DDFF38A45A11DB9C8B /* Products */ = { + isa = PBXGroup; + children = ( + 089C1665FE841158C02AAC07 /* Resources */, + BE1FA74107AF4C45004B6283 /* libSDL2_image.a */, + ); + name = Products; + sourceTree = ""; + }; + 0867D691FE84028FC02AAC07 /* SDL_imageFramework */ = { + isa = PBXGroup; + children = ( + 0153844A006D81B07F000001 /* Public Headers */, + 08FB77ACFE841707C02AAC07 /* Library Source */, + 034768DDFF38A45A11DB9C8B /* Products */, + ); + name = SDL_imageFramework; + sourceTree = ""; + }; + 089C1665FE841158C02AAC07 /* Resources */ = { + isa = PBXGroup; + children = ( + ); + name = Resources; + sourceTree = ""; + }; + 08FB77ACFE841707C02AAC07 /* Library Source */ = { + isa = PBXGroup; + children = ( + AA126A991617A4A4005ABC8F /* IMG.c */, + AA126A8B1617A4A4005ABC8F /* IMG_ImageIO.m */, + AA126A891617A4A4005ABC8F /* IMG_bmp.c */, + AA126A8A1617A4A4005ABC8F /* IMG_gif.c */, + AA126A8C1617A4A4005ABC8F /* IMG_jpg.c */, + AA126A8D1617A4A4005ABC8F /* IMG_lbm.c */, + AA126A8E1617A4A4005ABC8F /* IMG_pcx.c */, + AA126A8F1617A4A4005ABC8F /* IMG_png.c */, + AA126A901617A4A4005ABC8F /* IMG_pnm.c */, + AA126A911617A4A4005ABC8F /* IMG_tga.c */, + AA126A921617A4A4005ABC8F /* IMG_tif.c */, + AA126A941617A4A4005ABC8F /* IMG_webp.c */, + AA126A951617A4A4005ABC8F /* IMG_xcf.c */, + AA126A961617A4A4005ABC8F /* IMG_xpm.c */, + AA126A971617A4A4005ABC8F /* IMG_xv.c */, + AA126A981617A4A4005ABC8F /* IMG_xxx.c */, + ); + name = "Library Source"; + sourceTree = ""; + }; +/* End PBXGroup section */ + +/* Begin PBXHeadersBuildPhase section */ + BE1FA73007AF4C45004B6283 /* Headers */ = { + isa = PBXHeadersBuildPhase; + buildActionMask = 2147483647; + files = ( + 00A06D7812FFBFD5009F1A11 /* SDL_image.h in Headers */, + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXHeadersBuildPhase section */ + +/* Begin PBXNativeTarget section */ + BE1FA72F07AF4C45004B6283 /* libSDL_image */ = { + isa = PBXNativeTarget; + buildConfigurationList = 00B7E3AE097EB73D00826121 /* Build configuration list for PBXNativeTarget "libSDL_image" */; + buildPhases = ( + BE1FA73007AF4C45004B6283 /* Headers */, + BE1FA73107AF4C45004B6283 /* Sources */, + BE1FA73F07AF4C45004B6283 /* Frameworks */, + BE1FA74007AF4C45004B6283 /* Rez */, + ); + buildRules = ( + ); + dependencies = ( + ); + name = libSDL_image; + productInstallPath = /usr/local/lib; + productName = "Static Library"; + productReference = BE1FA74107AF4C45004B6283 /* libSDL2_image.a */; + productType = "com.apple.product-type.library.static"; + }; +/* End PBXNativeTarget section */ + +/* Begin PBXProject section */ + 0867D690FE84028FC02AAC07 /* Project object */ = { + isa = PBXProject; + buildConfigurationList = 00B7E3B6097EB73D00826121 /* Build configuration list for PBXProject "SDL_image" */; + compatibilityVersion = "Xcode 3.2"; + developmentRegion = English; + hasScannedForEncodings = 1; + knownRegions = ( + English, + Japanese, + French, + German, + ); + mainGroup = 0867D691FE84028FC02AAC07 /* SDL_imageFramework */; + productRefGroup = 034768DDFF38A45A11DB9C8B /* Products */; + projectDirPath = ""; + projectRoot = ..; + targets = ( + BE1FA72F07AF4C45004B6283 /* libSDL_image */, + ); + }; +/* End PBXProject section */ + +/* Begin PBXRezBuildPhase section */ + BE1FA74007AF4C45004B6283 /* Rez */ = { + isa = PBXRezBuildPhase; + buildActionMask = 2147483647; + files = ( + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXRezBuildPhase section */ + +/* Begin PBXSourcesBuildPhase section */ + BE1FA73107AF4C45004B6283 /* Sources */ = { + isa = PBXSourcesBuildPhase; + buildActionMask = 2147483647; + files = ( + AA126A9A1617A4A4005ABC8F /* IMG_bmp.c in Sources */, + AA126A9B1617A4A4005ABC8F /* IMG_gif.c in Sources */, + AA126A9C1617A4A4005ABC8F /* IMG_ImageIO.m in Sources */, + AA126A9D1617A4A4005ABC8F /* IMG_jpg.c in Sources */, + AA126A9E1617A4A4005ABC8F /* IMG_lbm.c in Sources */, + AA126A9F1617A4A4005ABC8F /* IMG_pcx.c in Sources */, + AA126AA01617A4A4005ABC8F /* IMG_png.c in Sources */, + AA126AA11617A4A4005ABC8F /* IMG_pnm.c in Sources */, + AA126AA21617A4A4005ABC8F /* IMG_tga.c in Sources */, + AA126AA31617A4A4005ABC8F /* IMG_tif.c in Sources */, + AA126AA51617A4A4005ABC8F /* IMG_webp.c in Sources */, + AA126AA61617A4A4005ABC8F /* IMG_xcf.c in Sources */, + AA126AA71617A4A4005ABC8F /* IMG_xpm.c in Sources */, + AA126AA81617A4A4005ABC8F /* IMG_xv.c in Sources */, + AA126AA91617A4A4005ABC8F /* IMG_xxx.c in Sources */, + AA126AAA1617A4A4005ABC8F /* IMG.c in Sources */, + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXSourcesBuildPhase section */ + +/* Begin XCBuildConfiguration section */ + 007288110F0DA5BA00C302A9 /* Debug */ = { + isa = XCBuildConfiguration; + buildSettings = { + ARCHS = "$(ARCHS_STANDARD_32_BIT)"; + COPY_PHASE_STRIP = NO; + GCC_OPTIMIZATION_LEVEL = 0; + GCC_PREPROCESSOR_DEFINITIONS = ( + LOAD_BMP, + LOAD_GIF, + LOAD_JPG, + LOAD_LBM, + LOAD_PCX, + LOAD_PNG, + LOAD_PNM, + LOAD_TGA, + LOAD_TIF, + LOAD_XPM, + LOAD_XV, + ); + GCC_SYMBOLS_PRIVATE_EXTERN = YES; + HEADER_SEARCH_PATHS = "$(SRCROOT)/../../SDL/include"; + IPHONEOS_DEPLOYMENT_TARGET = 3.0; + SDKROOT = iphoneos; + TARGETED_DEVICE_FAMILY = "1,2"; + }; + name = Debug; + }; + 007288130F0DA5BA00C302A9 /* Debug */ = { + isa = XCBuildConfiguration; + buildSettings = { + DYLIB_COMPATIBILITY_VERSION = 1; + DYLIB_CURRENT_VERSION = 1; + GCC_ENABLE_FIX_AND_CONTINUE = YES; + LIBRARY_STYLE = STATIC; + PRODUCT_NAME = SDL2_image; + SECTORDER_FLAGS = ""; + SKIP_INSTALL = YES; + }; + name = Debug; + }; + 007288150F0DA5C400C302A9 /* Release */ = { + isa = XCBuildConfiguration; + buildSettings = { + ARCHS = "$(ARCHS_STANDARD_32_BIT)"; + GCC_GENERATE_DEBUGGING_SYMBOLS = NO; + GCC_PREPROCESSOR_DEFINITIONS = ( + LOAD_BMP, + LOAD_GIF, + LOAD_JPG, + LOAD_LBM, + LOAD_PCX, + LOAD_PNG, + LOAD_PNM, + LOAD_TGA, + LOAD_TIF, + LOAD_XPM, + LOAD_XV, + ); + GCC_SYMBOLS_PRIVATE_EXTERN = YES; + HEADER_SEARCH_PATHS = "$(SRCROOT)/../../SDL/include"; + IPHONEOS_DEPLOYMENT_TARGET = 3.0; + SDKROOT = iphoneos; + TARGETED_DEVICE_FAMILY = "1,2"; + }; + name = Release; + }; + 007288170F0DA5C400C302A9 /* Release */ = { + isa = XCBuildConfiguration; + buildSettings = { + DYLIB_COMPATIBILITY_VERSION = 1; + DYLIB_CURRENT_VERSION = 1; + GCC_ENABLE_FIX_AND_CONTINUE = NO; + LIBRARY_STYLE = STATIC; + PRODUCT_NAME = SDL2_image; + SECTORDER_FLAGS = ""; + SKIP_INSTALL = YES; + }; + name = Release; + }; +/* End XCBuildConfiguration section */ + +/* Begin XCConfigurationList section */ + 00B7E3AE097EB73D00826121 /* Build configuration list for PBXNativeTarget "libSDL_image" */ = { + isa = XCConfigurationList; + buildConfigurations = ( + 007288130F0DA5BA00C302A9 /* Debug */, + 007288170F0DA5C400C302A9 /* Release */, + ); + defaultConfigurationIsVisible = 0; + defaultConfigurationName = Release; + }; + 00B7E3B6097EB73D00826121 /* Build configuration list for PBXProject "SDL_image" */ = { + isa = XCConfigurationList; + buildConfigurations = ( + 007288110F0DA5BA00C302A9 /* Debug */, + 007288150F0DA5C400C302A9 /* Release */, + ); + defaultConfigurationIsVisible = 0; + defaultConfigurationName = Release; + }; +/* End XCConfigurationList section */ + }; + rootObject = 0867D690FE84028FC02AAC07 /* Project object */; +} diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/decode.h b/src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/decode.h new file mode 100644 index 000000000..fc2a83aba --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/decode.h @@ -0,0 +1,488 @@ +// Copyright 2010 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// Main decoding functions for WebP images. +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_DECODE_H_ +#define WEBP_WEBP_DECODE_H_ + +#include "./types.h" + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +#define WEBP_DECODER_ABI_VERSION 0x0201 // MAJOR(8b) + MINOR(8b) + +// Note: forward declaring enumerations is not allowed in (strict) C and C++, +// the types are left here for reference. +// typedef enum VP8StatusCode VP8StatusCode; +// typedef enum WEBP_CSP_MODE WEBP_CSP_MODE; +typedef struct WebPRGBABuffer WebPRGBABuffer; +typedef struct WebPYUVABuffer WebPYUVABuffer; +typedef struct WebPDecBuffer WebPDecBuffer; +typedef struct WebPIDecoder WebPIDecoder; +typedef struct WebPBitstreamFeatures WebPBitstreamFeatures; +typedef struct WebPDecoderOptions WebPDecoderOptions; +typedef struct WebPDecoderConfig WebPDecoderConfig; + +// Return the decoder's version number, packed in hexadecimal using 8bits for +// each of major/minor/revision. E.g: v2.5.7 is 0x020507. +WEBP_EXTERN(int) WebPGetDecoderVersion(void); + +// Retrieve basic header information: width, height. +// This function will also validate the header and return 0 in +// case of formatting error. +// Pointers 'width' and 'height' can be passed NULL if deemed irrelevant. +WEBP_EXTERN(int) WebPGetInfo(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Decodes WebP images pointed to by 'data' and returns RGBA samples, along +// with the dimensions in *width and *height. The ordering of samples in +// memory is R, G, B, A, R, G, B, A... in scan order (endian-independent). +// The returned pointer should be deleted calling free(). +// Returns NULL in case of error. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBA(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning A, R, G, B, A, R, G, B... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeARGB(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning B, G, R, A, B, G, R, A... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeBGRA(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning R, G, B, R, G, B... ordered data. +// If the bitstream contains transparency, it is ignored. +WEBP_EXTERN(uint8_t*) WebPDecodeRGB(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGB, but returning B, G, R, B, G, R... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeBGR(const uint8_t* data, size_t data_size, + int* width, int* height); + + +// Decode WebP images pointed to by 'data' to Y'UV format(*). The pointer +// returned is the Y samples buffer. Upon return, *u and *v will point to +// the U and V chroma data. These U and V buffers need NOT be free()'d, +// unlike the returned Y luma one. The dimension of the U and V planes +// are both (*width + 1) / 2 and (*height + 1)/ 2. +// Upon return, the Y buffer has a stride returned as '*stride', while U and V +// have a common stride returned as '*uv_stride'. +// Return NULL in case of error. +// (*) Also named Y'CbCr. See: http://en.wikipedia.org/wiki/YCbCr +WEBP_EXTERN(uint8_t*) WebPDecodeYUV(const uint8_t* data, size_t data_size, + int* width, int* height, + uint8_t** u, uint8_t** v, + int* stride, int* uv_stride); + +// These five functions are variants of the above ones, that decode the image +// directly into a pre-allocated buffer 'output_buffer'. The maximum storage +// available in this buffer is indicated by 'output_buffer_size'. If this +// storage is not sufficient (or an error occurred), NULL is returned. +// Otherwise, output_buffer is returned, for convenience. +// The parameter 'output_stride' specifies the distance (in bytes) +// between scanlines. Hence, output_buffer_size is expected to be at least +// output_stride x picture-height. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBAInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeARGBInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeBGRAInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// RGB and BGR variants. Here too the transparency information, if present, +// will be dropped and ignored. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeBGRInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// WebPDecodeYUVInto() is a variant of WebPDecodeYUV() that operates directly +// into pre-allocated luma/chroma plane buffers. This function requires the +// strides to be passed: one for the luma plane and one for each of the +// chroma ones. The size of each plane buffer is passed as 'luma_size', +// 'u_size' and 'v_size' respectively. +// Pointer to the luma plane ('*luma') is returned or NULL if an error occurred +// during decoding (or because some buffers were found to be too small). +WEBP_EXTERN(uint8_t*) WebPDecodeYUVInto( + const uint8_t* data, size_t data_size, + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride); + +//------------------------------------------------------------------------------ +// Output colorspaces and buffer + +// Colorspaces +// Note: the naming describes the byte-ordering of packed samples in memory. +// For instance, MODE_BGRA relates to samples ordered as B,G,R,A,B,G,R,A,... +// Non-capital names (e.g.:MODE_Argb) relates to pre-multiplied RGB channels. +// RGBA-4444 and RGB-565 colorspaces are represented by following byte-order: +// RGBA-4444: [r3 r2 r1 r0 g3 g2 g1 g0], [b3 b2 b1 b0 a3 a2 a1 a0], ... +// RGB-565: [r4 r3 r2 r1 r0 g5 g4 g3], [g2 g1 g0 b4 b3 b2 b1 b0], ... +// In the case WEBP_SWAP_16BITS_CSP is defined, the bytes are swapped for +// these two modes: +// RGBA-4444: [b3 b2 b1 b0 a3 a2 a1 a0], [r3 r2 r1 r0 g3 g2 g1 g0], ... +// RGB-565: [g2 g1 g0 b4 b3 b2 b1 b0], [r4 r3 r2 r1 r0 g5 g4 g3], ... + +typedef enum WEBP_CSP_MODE { + MODE_RGB = 0, MODE_RGBA = 1, + MODE_BGR = 2, MODE_BGRA = 3, + MODE_ARGB = 4, MODE_RGBA_4444 = 5, + MODE_RGB_565 = 6, + // RGB-premultiplied transparent modes (alpha value is preserved) + MODE_rgbA = 7, + MODE_bgrA = 8, + MODE_Argb = 9, + MODE_rgbA_4444 = 10, + // YUV modes must come after RGB ones. + MODE_YUV = 11, MODE_YUVA = 12, // yuv 4:2:0 + MODE_LAST = 13 +} WEBP_CSP_MODE; + +// Some useful macros: +static WEBP_INLINE int WebPIsPremultipliedMode(WEBP_CSP_MODE mode) { + return (mode == MODE_rgbA || mode == MODE_bgrA || mode == MODE_Argb || + mode == MODE_rgbA_4444); +} + +static WEBP_INLINE int WebPIsAlphaMode(WEBP_CSP_MODE mode) { + return (mode == MODE_RGBA || mode == MODE_BGRA || mode == MODE_ARGB || + mode == MODE_RGBA_4444 || mode == MODE_YUVA || + WebPIsPremultipliedMode(mode)); +} + +static WEBP_INLINE int WebPIsRGBMode(WEBP_CSP_MODE mode) { + return (mode < MODE_YUV); +} + +//------------------------------------------------------------------------------ +// WebPDecBuffer: Generic structure for describing the output sample buffer. + +struct WebPRGBABuffer { // view as RGBA + uint8_t* rgba; // pointer to RGBA samples + int stride; // stride in bytes from one scanline to the next. + size_t size; // total size of the *rgba buffer. +}; + +struct WebPYUVABuffer { // view as YUVA + uint8_t* y, *u, *v, *a; // pointer to luma, chroma U/V, alpha samples + int y_stride; // luma stride + int u_stride, v_stride; // chroma strides + int a_stride; // alpha stride + size_t y_size; // luma plane size + size_t u_size, v_size; // chroma planes size + size_t a_size; // alpha-plane size +}; + +// Output buffer +struct WebPDecBuffer { + WEBP_CSP_MODE colorspace; // Colorspace. + int width, height; // Dimensions. + int is_external_memory; // If true, 'internal_memory' pointer is not used. + union { + WebPRGBABuffer RGBA; + WebPYUVABuffer YUVA; + } u; // Nameless union of buffer parameters. + uint32_t pad[4]; // padding for later use + + uint8_t* private_memory; // Internally allocated memory (only when + // is_external_memory is false). Should not be used + // externally, but accessed via the buffer union. +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPInitDecBufferInternal(WebPDecBuffer*, int); + +// Initialize the structure as empty. Must be called before any other use. +// Returns false in case of version mismatch +static WEBP_INLINE int WebPInitDecBuffer(WebPDecBuffer* buffer) { + return WebPInitDecBufferInternal(buffer, WEBP_DECODER_ABI_VERSION); +} + +// Free any memory associated with the buffer. Must always be called last. +// Note: doesn't free the 'buffer' structure itself. +WEBP_EXTERN(void) WebPFreeDecBuffer(WebPDecBuffer* buffer); + +//------------------------------------------------------------------------------ +// Enumeration of the status codes + +typedef enum VP8StatusCode { + VP8_STATUS_OK = 0, + VP8_STATUS_OUT_OF_MEMORY, + VP8_STATUS_INVALID_PARAM, + VP8_STATUS_BITSTREAM_ERROR, + VP8_STATUS_UNSUPPORTED_FEATURE, + VP8_STATUS_SUSPENDED, + VP8_STATUS_USER_ABORT, + VP8_STATUS_NOT_ENOUGH_DATA +} VP8StatusCode; + +//------------------------------------------------------------------------------ +// Incremental decoding +// +// This API allows streamlined decoding of partial data. +// Picture can be incrementally decoded as data become available thanks to the +// WebPIDecoder object. This object can be left in a SUSPENDED state if the +// picture is only partially decoded, pending additional input. +// Code example: +// +// WebPInitDecBuffer(&buffer); +// buffer.colorspace = mode; +// ... +// WebPIDecoder* idec = WebPINewDecoder(&buffer); +// while (has_more_data) { +// // ... (get additional data) +// status = WebPIAppend(idec, new_data, new_data_size); +// if (status != VP8_STATUS_SUSPENDED || +// break; +// } +// +// // The above call decodes the current available buffer. +// // Part of the image can now be refreshed by calling to +// // WebPIDecGetRGB()/WebPIDecGetYUVA() etc. +// } +// WebPIDelete(idec); + +// Creates a new incremental decoder with the supplied buffer parameter. +// This output_buffer can be passed NULL, in which case a default output buffer +// is used (with MODE_RGB). Otherwise, an internal reference to 'output_buffer' +// is kept, which means that the lifespan of 'output_buffer' must be larger than +// that of the returned WebPIDecoder object. +// The supplied 'output_buffer' content MUST NOT be changed between calls to +// WebPIAppend() or WebPIUpdate() unless 'output_buffer.is_external_memory' is +// set to 1. In such a case, it is allowed to modify the pointers, size and +// stride of output_buffer.u.RGBA or output_buffer.u.YUVA, provided they remain +// within valid bounds. +// All other fields of WebPDecBuffer MUST remain constant between calls. +// Returns NULL if the allocation failed. +WEBP_EXTERN(WebPIDecoder*) WebPINewDecoder(WebPDecBuffer* output_buffer); + +// This function allocates and initializes an incremental-decoder object, which +// will output the RGB/A samples specified by 'csp' into a preallocated +// buffer 'output_buffer'. The size of this buffer is at least +// 'output_buffer_size' and the stride (distance in bytes between two scanlines) +// is specified by 'output_stride'. +// Additionally, output_buffer can be passed NULL in which case the output +// buffer will be allocated automatically when the decoding starts. The +// colorspace 'csp' is taken into account for allocating this buffer. All other +// parameters are ignored. +// Returns NULL if the allocation failed, or if some parameters are invalid. +WEBP_EXTERN(WebPIDecoder*) WebPINewRGB( + WEBP_CSP_MODE csp, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// This function allocates and initializes an incremental-decoder object, which +// will output the raw luma/chroma samples into a preallocated planes if +// supplied. The luma plane is specified by its pointer 'luma', its size +// 'luma_size' and its stride 'luma_stride'. Similarly, the chroma-u plane +// is specified by the 'u', 'u_size' and 'u_stride' parameters, and the chroma-v +// plane by 'v' and 'v_size'. And same for the alpha-plane. The 'a' pointer +// can be pass NULL in case one is not interested in the transparency plane. +// Conversely, 'luma' can be passed NULL if no preallocated planes are supplied. +// In this case, the output buffer will be automatically allocated (using +// MODE_YUVA) when decoding starts. All parameters are then ignored. +// Returns NULL if the allocation failed or if a parameter is invalid. +WEBP_EXTERN(WebPIDecoder*) WebPINewYUVA( + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride, + uint8_t* a, size_t a_size, int a_stride); + +// Deprecated version of the above, without the alpha plane. +// Kept for backward compatibility. +WEBP_EXTERN(WebPIDecoder*) WebPINewYUV( + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride); + +// Deletes the WebPIDecoder object and associated memory. Must always be called +// if WebPINewDecoder, WebPINewRGB or WebPINewYUV succeeded. +WEBP_EXTERN(void) WebPIDelete(WebPIDecoder* idec); + +// Copies and decodes the next available data. Returns VP8_STATUS_OK when +// the image is successfully decoded. Returns VP8_STATUS_SUSPENDED when more +// data is expected. Returns error in other cases. +WEBP_EXTERN(VP8StatusCode) WebPIAppend( + WebPIDecoder* idec, const uint8_t* data, size_t data_size); + +// A variant of the above function to be used when data buffer contains +// partial data from the beginning. In this case data buffer is not copied +// to the internal memory. +// Note that the value of the 'data' pointer can change between calls to +// WebPIUpdate, for instance when the data buffer is resized to fit larger data. +WEBP_EXTERN(VP8StatusCode) WebPIUpdate( + WebPIDecoder* idec, const uint8_t* data, size_t data_size); + +// Returns the RGB/A image decoded so far. Returns NULL if output params +// are not initialized yet. The RGB/A output type corresponds to the colorspace +// specified during call to WebPINewDecoder() or WebPINewRGB(). +// *last_y is the index of last decoded row in raster scan order. Some pointers +// (*last_y, *width etc.) can be NULL if corresponding information is not +// needed. +WEBP_EXTERN(uint8_t*) WebPIDecGetRGB( + const WebPIDecoder* idec, int* last_y, + int* width, int* height, int* stride); + +// Same as above function to get a YUVA image. Returns pointer to the luma +// plane or NULL in case of error. If there is no alpha information +// the alpha pointer '*a' will be returned NULL. +WEBP_EXTERN(uint8_t*) WebPIDecGetYUVA( + const WebPIDecoder* idec, int* last_y, + uint8_t** u, uint8_t** v, uint8_t** a, + int* width, int* height, int* stride, int* uv_stride, int* a_stride); + +// Deprecated alpha-less version of WebPIDecGetYUVA(): it will ignore the +// alpha information (if present). Kept for backward compatibility. +static WEBP_INLINE uint8_t* WebPIDecGetYUV( + const WebPIDecoder* idec, int* last_y, uint8_t** u, uint8_t** v, + int* width, int* height, int* stride, int* uv_stride) { + return WebPIDecGetYUVA(idec, last_y, u, v, NULL, width, height, + stride, uv_stride, NULL); +} + +// Generic call to retrieve information about the displayable area. +// If non NULL, the left/right/width/height pointers are filled with the visible +// rectangular area so far. +// Returns NULL in case the incremental decoder object is in an invalid state. +// Otherwise returns the pointer to the internal representation. This structure +// is read-only, tied to WebPIDecoder's lifespan and should not be modified. +WEBP_EXTERN(const WebPDecBuffer*) WebPIDecodedArea( + const WebPIDecoder* idec, int* left, int* top, int* width, int* height); + +//------------------------------------------------------------------------------ +// Advanced decoding parametrization +// +// Code sample for using the advanced decoding API +/* + // A) Init a configuration object + WebPDecoderConfig config; + CHECK(WebPInitDecoderConfig(&config)); + + // B) optional: retrieve the bitstream's features. + CHECK(WebPGetFeatures(data, data_size, &config.input) == VP8_STATUS_OK); + + // C) Adjust 'config', if needed + config.no_fancy_upsampling = 1; + config.output.colorspace = MODE_BGRA; + // etc. + + // Note that you can also make config.output point to an externally + // supplied memory buffer, provided it's big enough to store the decoded + // picture. Otherwise, config.output will just be used to allocate memory + // and store the decoded picture. + + // D) Decode! + CHECK(WebPDecode(data, data_size, &config) == VP8_STATUS_OK); + + // E) Decoded image is now in config.output (and config.output.u.RGBA) + + // F) Reclaim memory allocated in config's object. It's safe to call + // this function even if the memory is external and wasn't allocated + // by WebPDecode(). + WebPFreeDecBuffer(&config.output); +*/ + +// Features gathered from the bitstream +struct WebPBitstreamFeatures { + int width; // Width in pixels, as read from the bitstream. + int height; // Height in pixels, as read from the bitstream. + int has_alpha; // True if the bitstream contains an alpha channel. + int has_animation; // True if the bitstream is an animation. + + // Unused for now: + int bitstream_version; // should be 0 for now. TODO(later) + int no_incremental_decoding; // if true, using incremental decoding is not + // recommended. + int rotate; // TODO(later) + int uv_sampling; // should be 0 for now. TODO(later) + uint32_t pad[2]; // padding for later use +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(VP8StatusCode) WebPGetFeaturesInternal( + const uint8_t*, size_t, WebPBitstreamFeatures*, int); + +// Retrieve features from the bitstream. The *features structure is filled +// with information gathered from the bitstream. +// Returns VP8_STATUS_OK when the features are successfully retrieved. Returns +// VP8_STATUS_NOT_ENOUGH_DATA when more data is needed to retrieve the +// features from headers. Returns error in other cases. +static WEBP_INLINE VP8StatusCode WebPGetFeatures( + const uint8_t* data, size_t data_size, + WebPBitstreamFeatures* features) { + return WebPGetFeaturesInternal(data, data_size, features, + WEBP_DECODER_ABI_VERSION); +} + +// Decoding options +struct WebPDecoderOptions { + int bypass_filtering; // if true, skip the in-loop filtering + int no_fancy_upsampling; // if true, use faster pointwise upsampler + int use_cropping; // if true, cropping is applied _first_ + int crop_left, crop_top; // top-left position for cropping. + // Will be snapped to even values. + int crop_width, crop_height; // dimension of the cropping area + int use_scaling; // if true, scaling is applied _afterward_ + int scaled_width, scaled_height; // final resolution + int use_threads; // if true, use multi-threaded decoding + + // Unused for now: + int force_rotation; // forced rotation (to be applied _last_) + int no_enhancement; // if true, discard enhancement layer + uint32_t pad[6]; // padding for later use +}; + +// Main object storing the configuration for advanced decoding. +struct WebPDecoderConfig { + WebPBitstreamFeatures input; // Immutable bitstream features (optional) + WebPDecBuffer output; // Output buffer (can point to external mem) + WebPDecoderOptions options; // Decoding options +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPInitDecoderConfigInternal(WebPDecoderConfig*, int); + +// Initialize the configuration as empty. This function must always be +// called first, unless WebPGetFeatures() is to be called. +// Returns false in case of mismatched version. +static WEBP_INLINE int WebPInitDecoderConfig(WebPDecoderConfig* config) { + return WebPInitDecoderConfigInternal(config, WEBP_DECODER_ABI_VERSION); +} + +// Instantiate a new incremental decoder object with the requested +// configuration. The bitstream can be passed using 'data' and 'data_size' +// parameter, in which case the features will be parsed and stored into +// config->input. Otherwise, 'data' can be NULL and no parsing will occur. +// Note that 'config' can be NULL too, in which case a default configuration +// is used. +// The return WebPIDecoder object must always be deleted calling WebPIDelete(). +// Returns NULL in case of error (and config->status will then reflect +// the error condition). +WEBP_EXTERN(WebPIDecoder*) WebPIDecode(const uint8_t* data, size_t data_size, + WebPDecoderConfig* config); + +// Non-incremental version. This version decodes the full data at once, taking +// 'config' into account. Returns decoding status (which should be VP8_STATUS_OK +// if the decoding was successful). +WEBP_EXTERN(VP8StatusCode) WebPDecode(const uint8_t* data, size_t data_size, + WebPDecoderConfig* config); + +#if defined(__cplusplus) || defined(c_plusplus) +} // extern "C" +#endif + +#endif /* WEBP_WEBP_DECODE_H_ */ diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/encode.h b/src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/encode.h new file mode 100644 index 000000000..d635fcf0e --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/encode.h @@ -0,0 +1,485 @@ +// Copyright 2011 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// WebP encoder: main interface +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_ENCODE_H_ +#define WEBP_WEBP_ENCODE_H_ + +#include "./types.h" + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +#define WEBP_ENCODER_ABI_VERSION 0x0201 // MAJOR(8b) + MINOR(8b) + +// Note: forward declaring enumerations is not allowed in (strict) C and C++, +// the types are left here for reference. +// typedef enum WebPImageHint WebPImageHint; +// typedef enum WebPEncCSP WebPEncCSP; +// typedef enum WebPPreset WebPPreset; +// typedef enum WebPEncodingError WebPEncodingError; +typedef struct WebPConfig WebPConfig; +typedef struct WebPPicture WebPPicture; // main structure for I/O +typedef struct WebPAuxStats WebPAuxStats; +typedef struct WebPMemoryWriter WebPMemoryWriter; + +// Return the encoder's version number, packed in hexadecimal using 8bits for +// each of major/minor/revision. E.g: v2.5.7 is 0x020507. +WEBP_EXTERN(int) WebPGetEncoderVersion(void); + +//------------------------------------------------------------------------------ +// One-stop-shop call! No questions asked: + +// Returns the size of the compressed data (pointed to by *output), or 0 if +// an error occurred. The compressed data must be released by the caller +// using the call 'free(*output)'. +// These functions compress using the lossy format, and the quality_factor +// can go from 0 (smaller output, lower quality) to 100 (best quality, +// larger output). +WEBP_EXTERN(size_t) WebPEncodeRGB(const uint8_t* rgb, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeBGR(const uint8_t* bgr, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeRGBA(const uint8_t* rgba, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeBGRA(const uint8_t* bgra, + int width, int height, int stride, + float quality_factor, uint8_t** output); + +// These functions are the equivalent of the above, but compressing in a +// lossless manner. Files are usually larger than lossy format, but will +// not suffer any compression loss. +WEBP_EXTERN(size_t) WebPEncodeLosslessRGB(const uint8_t* rgb, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessBGR(const uint8_t* bgr, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessRGBA(const uint8_t* rgba, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessBGRA(const uint8_t* bgra, + int width, int height, int stride, + uint8_t** output); + +//------------------------------------------------------------------------------ +// Coding parameters + +// Image characteristics hint for the underlying encoder. +typedef enum WebPImageHint { + WEBP_HINT_DEFAULT = 0, // default preset. + WEBP_HINT_PICTURE, // digital picture, like portrait, inner shot + WEBP_HINT_PHOTO, // outdoor photograph, with natural lighting + WEBP_HINT_GRAPH, // Discrete tone image (graph, map-tile etc). + WEBP_HINT_LAST +} WebPImageHint; + +// Compression parameters. +struct WebPConfig { + int lossless; // Lossless encoding (0=lossy(default), 1=lossless). + float quality; // between 0 (smallest file) and 100 (biggest) + int method; // quality/speed trade-off (0=fast, 6=slower-better) + + WebPImageHint image_hint; // Hint for image type (lossless only for now). + + // Parameters related to lossy compression only: + int target_size; // if non-zero, set the desired target size in bytes. + // Takes precedence over the 'compression' parameter. + float target_PSNR; // if non-zero, specifies the minimal distortion to + // try to achieve. Takes precedence over target_size. + int segments; // maximum number of segments to use, in [1..4] + int sns_strength; // Spatial Noise Shaping. 0=off, 100=maximum. + int filter_strength; // range: [0 = off .. 100 = strongest] + int filter_sharpness; // range: [0 = off .. 7 = least sharp] + int filter_type; // filtering type: 0 = simple, 1 = strong (only used + // if filter_strength > 0 or autofilter > 0) + int autofilter; // Auto adjust filter's strength [0 = off, 1 = on] + int alpha_compression; // Algorithm for encoding the alpha plane (0 = none, + // 1 = compressed with WebP lossless). Default is 1. + int alpha_filtering; // Predictive filtering method for alpha plane. + // 0: none, 1: fast, 2: best. Default if 1. + int alpha_quality; // Between 0 (smallest size) and 100 (lossless). + // Default is 100. + int pass; // number of entropy-analysis passes (in [1..10]). + + int show_compressed; // if true, export the compressed picture back. + // In-loop filtering is not applied. + int preprocessing; // preprocessing filter (0=none, 1=segment-smooth) + int partitions; // log2(number of token partitions) in [0..3]. Default + // is set to 0 for easier progressive decoding. + int partition_limit; // quality degradation allowed to fit the 512k limit + // on prediction modes coding (0: no degradation, + // 100: maximum possible degradation). + int emulate_jpeg_size; // If true, compression parameters will be remapped + // to better match the expected output size from + // JPEG compression. Generally, the output size will + // be similar but the degradation will be lower. + int thread_level; // If non-zero, try and use multi-threaded encoding. + int low_memory; // If set, reduce memory usage (but increase CPU use). + + uint32_t pad[5]; // padding for later use +}; + +// Enumerate some predefined settings for WebPConfig, depending on the type +// of source picture. These presets are used when calling WebPConfigPreset(). +typedef enum WebPPreset { + WEBP_PRESET_DEFAULT = 0, // default preset. + WEBP_PRESET_PICTURE, // digital picture, like portrait, inner shot + WEBP_PRESET_PHOTO, // outdoor photograph, with natural lighting + WEBP_PRESET_DRAWING, // hand or line drawing, with high-contrast details + WEBP_PRESET_ICON, // small-sized colorful images + WEBP_PRESET_TEXT // text-like +} WebPPreset; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPConfigInitInternal(WebPConfig*, WebPPreset, float, int); + +// Should always be called, to initialize a fresh WebPConfig structure before +// modification. Returns false in case of version mismatch. WebPConfigInit() +// must have succeeded before using the 'config' object. +// Note that the default values are lossless=0 and quality=75. +static WEBP_INLINE int WebPConfigInit(WebPConfig* config) { + return WebPConfigInitInternal(config, WEBP_PRESET_DEFAULT, 75.f, + WEBP_ENCODER_ABI_VERSION); +} + +// This function will initialize the configuration according to a predefined +// set of parameters (referred to by 'preset') and a given quality factor. +// This function can be called as a replacement to WebPConfigInit(). Will +// return false in case of error. +static WEBP_INLINE int WebPConfigPreset(WebPConfig* config, + WebPPreset preset, float quality) { + return WebPConfigInitInternal(config, preset, quality, + WEBP_ENCODER_ABI_VERSION); +} + +// Returns true if 'config' is non-NULL and all configuration parameters are +// within their valid ranges. +WEBP_EXTERN(int) WebPValidateConfig(const WebPConfig* config); + +//------------------------------------------------------------------------------ +// Input / Output +// Structure for storing auxiliary statistics (mostly for lossy encoding). + +struct WebPAuxStats { + int coded_size; // final size + + float PSNR[5]; // peak-signal-to-noise ratio for Y/U/V/All/Alpha + int block_count[3]; // number of intra4/intra16/skipped macroblocks + int header_bytes[2]; // approximate number of bytes spent for header + // and mode-partition #0 + int residual_bytes[3][4]; // approximate number of bytes spent for + // DC/AC/uv coefficients for each (0..3) segments. + int segment_size[4]; // number of macroblocks in each segments + int segment_quant[4]; // quantizer values for each segments + int segment_level[4]; // filtering strength for each segments [0..63] + + int alpha_data_size; // size of the transparency data + int layer_data_size; // size of the enhancement layer data + + // lossless encoder statistics + uint32_t lossless_features; // bit0:predictor bit1:cross-color transform + // bit2:subtract-green bit3:color indexing + int histogram_bits; // number of precision bits of histogram + int transform_bits; // precision bits for transform + int cache_bits; // number of bits for color cache lookup + int palette_size; // number of color in palette, if used + int lossless_size; // final lossless size + + uint32_t pad[4]; // padding for later use +}; + +// Signature for output function. Should return true if writing was successful. +// data/data_size is the segment of data to write, and 'picture' is for +// reference (and so one can make use of picture->custom_ptr). +typedef int (*WebPWriterFunction)(const uint8_t* data, size_t data_size, + const WebPPicture* picture); + +// WebPMemoryWrite: a special WebPWriterFunction that writes to memory using +// the following WebPMemoryWriter object (to be set as a custom_ptr). +struct WebPMemoryWriter { + uint8_t* mem; // final buffer (of size 'max_size', larger than 'size'). + size_t size; // final size + size_t max_size; // total capacity + uint32_t pad[1]; // padding for later use +}; + +// The following must be called first before any use. +WEBP_EXTERN(void) WebPMemoryWriterInit(WebPMemoryWriter* writer); + +// The custom writer to be used with WebPMemoryWriter as custom_ptr. Upon +// completion, writer.mem and writer.size will hold the coded data. +// writer.mem must be freed using the call 'free(writer.mem)'. +WEBP_EXTERN(int) WebPMemoryWrite(const uint8_t* data, size_t data_size, + const WebPPicture* picture); + +// Progress hook, called from time to time to report progress. It can return +// false to request an abort of the encoding process, or true otherwise if +// everything is OK. +typedef int (*WebPProgressHook)(int percent, const WebPPicture* picture); + +// Color spaces. +typedef enum WebPEncCSP { + // chroma sampling + WEBP_YUV420 = 0, // 4:2:0 + WEBP_YUV422 = 1, // 4:2:2 + WEBP_YUV444 = 2, // 4:4:4 + WEBP_YUV400 = 3, // grayscale + WEBP_CSP_UV_MASK = 3, // bit-mask to get the UV sampling factors + // alpha channel variants + WEBP_YUV420A = 4, + WEBP_YUV422A = 5, + WEBP_YUV444A = 6, + WEBP_YUV400A = 7, // grayscale + alpha + WEBP_CSP_ALPHA_BIT = 4 // bit that is set if alpha is present +} WebPEncCSP; + +// Encoding error conditions. +typedef enum WebPEncodingError { + VP8_ENC_OK = 0, + VP8_ENC_ERROR_OUT_OF_MEMORY, // memory error allocating objects + VP8_ENC_ERROR_BITSTREAM_OUT_OF_MEMORY, // memory error while flushing bits + VP8_ENC_ERROR_NULL_PARAMETER, // a pointer parameter is NULL + VP8_ENC_ERROR_INVALID_CONFIGURATION, // configuration is invalid + VP8_ENC_ERROR_BAD_DIMENSION, // picture has invalid width/height + VP8_ENC_ERROR_PARTITION0_OVERFLOW, // partition is bigger than 512k + VP8_ENC_ERROR_PARTITION_OVERFLOW, // partition is bigger than 16M + VP8_ENC_ERROR_BAD_WRITE, // error while flushing bytes + VP8_ENC_ERROR_FILE_TOO_BIG, // file is bigger than 4G + VP8_ENC_ERROR_USER_ABORT, // abort request by user + VP8_ENC_ERROR_LAST // list terminator. always last. +} WebPEncodingError; + +// maximum width/height allowed (inclusive), in pixels +#define WEBP_MAX_DIMENSION 16383 + +// Main exchange structure (input samples, output bytes, statistics) +struct WebPPicture { + // INPUT + ////////////// + // Main flag for encoder selecting between ARGB or YUV input. + // It is recommended to use ARGB input (*argb, argb_stride) for lossless + // compression, and YUV input (*y, *u, *v, etc.) for lossy compression + // since these are the respective native colorspace for these formats. + int use_argb; + + // YUV input (mostly used for input to lossy compression) + WebPEncCSP colorspace; // colorspace: should be YUV420 for now (=Y'CbCr). + int width, height; // dimensions (less or equal to WEBP_MAX_DIMENSION) + uint8_t *y, *u, *v; // pointers to luma/chroma planes. + int y_stride, uv_stride; // luma/chroma strides. + uint8_t* a; // pointer to the alpha plane + int a_stride; // stride of the alpha plane + uint32_t pad1[2]; // padding for later use + + // ARGB input (mostly used for input to lossless compression) + uint32_t* argb; // Pointer to argb (32 bit) plane. + int argb_stride; // This is stride in pixels units, not bytes. + uint32_t pad2[3]; // padding for later use + + // OUTPUT + /////////////// + // Byte-emission hook, to store compressed bytes as they are ready. + WebPWriterFunction writer; // can be NULL + void* custom_ptr; // can be used by the writer. + + // map for extra information (only for lossy compression mode) + int extra_info_type; // 1: intra type, 2: segment, 3: quant + // 4: intra-16 prediction mode, + // 5: chroma prediction mode, + // 6: bit cost, 7: distortion + uint8_t* extra_info; // if not NULL, points to an array of size + // ((width + 15) / 16) * ((height + 15) / 16) that + // will be filled with a macroblock map, depending + // on extra_info_type. + + // STATS AND REPORTS + /////////////////////////// + // Pointer to side statistics (updated only if not NULL) + WebPAuxStats* stats; + + // Error code for the latest error encountered during encoding + WebPEncodingError error_code; + + // If not NULL, report progress during encoding. + WebPProgressHook progress_hook; + + void* user_data; // this field is free to be set to any value and + // used during callbacks (like progress-report e.g.). + + uint32_t pad3[3]; // padding for later use + + // Unused for now: original samples (for non-YUV420 modes) + uint8_t *u0, *v0; + int uv0_stride; + + uint32_t pad4[7]; // padding for later use + + // PRIVATE FIELDS + //////////////////// + void* memory_; // row chunk of memory for yuva planes + void* memory_argb_; // and for argb too. + void* pad5[2]; // padding for later use +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPPictureInitInternal(WebPPicture*, int); + +// Should always be called, to initialize the structure. Returns false in case +// of version mismatch. WebPPictureInit() must have succeeded before using the +// 'picture' object. +// Note that, by default, use_argb is false and colorspace is WEBP_YUV420. +static WEBP_INLINE int WebPPictureInit(WebPPicture* picture) { + return WebPPictureInitInternal(picture, WEBP_ENCODER_ABI_VERSION); +} + +//------------------------------------------------------------------------------ +// WebPPicture utils + +// Convenience allocation / deallocation based on picture->width/height: +// Allocate y/u/v buffers as per colorspace/width/height specification. +// Note! This function will free the previous buffer if needed. +// Returns false in case of memory error. +WEBP_EXTERN(int) WebPPictureAlloc(WebPPicture* picture); + +// Release the memory allocated by WebPPictureAlloc() or WebPPictureImport*(). +// Note that this function does _not_ free the memory used by the 'picture' +// object itself. +// Besides memory (which is reclaimed) all other fields of 'picture' are +// preserved. +WEBP_EXTERN(void) WebPPictureFree(WebPPicture* picture); + +// Copy the pixels of *src into *dst, using WebPPictureAlloc. Upon return, +// *dst will fully own the copied pixels (this is not a view). +// Returns false in case of memory allocation error. +WEBP_EXTERN(int) WebPPictureCopy(const WebPPicture* src, WebPPicture* dst); + +// Compute PSNR, SSIM or LSIM distortion metric between two pictures. +// Result is in dB, stores in result[] in the Y/U/V/Alpha/All order. +// Returns false in case of error (src and ref don't have same dimension, ...) +// Warning: this function is rather CPU-intensive. +WEBP_EXTERN(int) WebPPictureDistortion( + const WebPPicture* src, const WebPPicture* ref, + int metric_type, // 0 = PSNR, 1 = SSIM, 2 = LSIM + float result[5]); + +// self-crops a picture to the rectangle defined by top/left/width/height. +// Returns false in case of memory allocation error, or if the rectangle is +// outside of the source picture. +// The rectangle for the view is defined by the top-left corner pixel +// coordinates (left, top) as well as its width and height. This rectangle +// must be fully be comprised inside the 'src' source picture. If the source +// picture uses the YUV420 colorspace, the top and left coordinates will be +// snapped to even values. +WEBP_EXTERN(int) WebPPictureCrop(WebPPicture* picture, + int left, int top, int width, int height); + +// Extracts a view from 'src' picture into 'dst'. The rectangle for the view +// is defined by the top-left corner pixel coordinates (left, top) as well +// as its width and height. This rectangle must be fully be comprised inside +// the 'src' source picture. If the source picture uses the YUV420 colorspace, +// the top and left coordinates will be snapped to even values. +// Picture 'src' must out-live 'dst' picture. Self-extraction of view is allowed +// ('src' equal to 'dst') as a mean of fast-cropping (but note that doing so, +// the original dimension will be lost). +// Returns false in case of memory allocation error or invalid parameters. +WEBP_EXTERN(int) WebPPictureView(const WebPPicture* src, + int left, int top, int width, int height, + WebPPicture* dst); + +// Returns true if the 'picture' is actually a view and therefore does +// not own the memory for pixels. +WEBP_EXTERN(int) WebPPictureIsView(const WebPPicture* picture); + +// Rescale a picture to new dimension width x height. +// Now gamma correction is applied. +// Returns false in case of error (invalid parameter or insufficient memory). +WEBP_EXTERN(int) WebPPictureRescale(WebPPicture* pic, int width, int height); + +// Colorspace conversion function to import RGB samples. +// Previous buffer will be free'd, if any. +// *rgb buffer should have a size of at least height * rgb_stride. +// Returns false in case of memory error. +WEBP_EXTERN(int) WebPPictureImportRGB( + WebPPicture* picture, const uint8_t* rgb, int rgb_stride); +// Same, but for RGBA buffer. +WEBP_EXTERN(int) WebPPictureImportRGBA( + WebPPicture* picture, const uint8_t* rgba, int rgba_stride); +// Same, but for RGBA buffer. Imports the RGB direct from the 32-bit format +// input buffer ignoring the alpha channel. Avoids needing to copy the data +// to a temporary 24-bit RGB buffer to import the RGB only. +WEBP_EXTERN(int) WebPPictureImportRGBX( + WebPPicture* picture, const uint8_t* rgbx, int rgbx_stride); + +// Variants of the above, but taking BGR(A|X) input. +WEBP_EXTERN(int) WebPPictureImportBGR( + WebPPicture* picture, const uint8_t* bgr, int bgr_stride); +WEBP_EXTERN(int) WebPPictureImportBGRA( + WebPPicture* picture, const uint8_t* bgra, int bgra_stride); +WEBP_EXTERN(int) WebPPictureImportBGRX( + WebPPicture* picture, const uint8_t* bgrx, int bgrx_stride); + +// Converts picture->argb data to the YUVA format specified by 'colorspace'. +// Upon return, picture->use_argb is set to false. The presence of real +// non-opaque transparent values is detected, and 'colorspace' will be +// adjusted accordingly. Note that this method is lossy. +// Returns false in case of error. +WEBP_EXTERN(int) WebPPictureARGBToYUVA(WebPPicture* picture, + WebPEncCSP colorspace); + +// Converts picture->yuv to picture->argb and sets picture->use_argb to true. +// The input format must be YUV_420 or YUV_420A. +// Note that the use of this method is discouraged if one has access to the +// raw ARGB samples, since using YUV420 is comparatively lossy. Also, the +// conversion from YUV420 to ARGB incurs a small loss too. +// Returns false in case of error. +WEBP_EXTERN(int) WebPPictureYUVAToARGB(WebPPicture* picture); + +// Helper function: given a width x height plane of YUV(A) samples +// (with stride 'stride'), clean-up the YUV samples under fully transparent +// area, to help compressibility (no guarantee, though). +WEBP_EXTERN(void) WebPCleanupTransparentArea(WebPPicture* picture); + +// Scan the picture 'picture' for the presence of non fully opaque alpha values. +// Returns true in such case. Otherwise returns false (indicating that the +// alpha plane can be ignored altogether e.g.). +WEBP_EXTERN(int) WebPPictureHasTransparency(const WebPPicture* picture); + +// Remove the transparency information (if present) by blending the color with +// the background color 'background_rgb' (specified as 24bit RGB triplet). +// After this call, all alpha values are reset to 0xff. +WEBP_EXTERN(void) WebPBlendAlpha(WebPPicture* pic, uint32_t background_rgb); + +//------------------------------------------------------------------------------ +// Main call + +// Main encoding call, after config and picture have been initialized. +// 'picture' must be less than 16384x16384 in dimension (cf WEBP_MAX_DIMENSION), +// and the 'config' object must be a valid one. +// Returns false in case of error, true otherwise. +// In case of error, picture->error_code is updated accordingly. +// 'picture' can hold the source samples in both YUV(A) or ARGB input, depending +// on the value of 'picture->use_argb'. It is highly recommended to use +// the former for lossy encoding, and the latter for lossless encoding +// (when config.lossless is true). Automatic conversion from one format to +// another is provided but they both incur some loss. +WEBP_EXTERN(int) WebPEncode(const WebPConfig* config, WebPPicture* picture); + +//------------------------------------------------------------------------------ + +#if defined(__cplusplus) || defined(c_plusplus) +} // extern "C" +#endif + +#endif /* WEBP_WEBP_ENCODE_H_ */ diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/types.h b/src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/types.h new file mode 100644 index 000000000..3e27190be --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Headers/webp/types.h @@ -0,0 +1,45 @@ +// Copyright 2010 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// Common types +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_TYPES_H_ +#define WEBP_WEBP_TYPES_H_ + +#include // for size_t + +#ifndef _MSC_VER +#include +#ifdef __STRICT_ANSI__ +#define WEBP_INLINE +#else /* __STRICT_ANSI__ */ +#define WEBP_INLINE inline +#endif +#else +typedef signed char int8_t; +typedef unsigned char uint8_t; +typedef signed short int16_t; +typedef unsigned short uint16_t; +typedef signed int int32_t; +typedef unsigned int uint32_t; +typedef unsigned long long int uint64_t; +typedef long long int int64_t; +#define WEBP_INLINE __forceinline +#endif /* _MSC_VER */ + +#ifndef WEBP_EXTERN +// This explicitly marks library functions and allows for changing the +// signature for e.g., Windows DLL builds. +#define WEBP_EXTERN(type) extern type +#endif /* WEBP_EXTERN */ + +// Macro to check ABI compatibility (same major revision number) +#define WEBP_ABI_IS_INCOMPATIBLE(a, b) (((a) >> 8) != ((b) >> 8)) + +#endif /* WEBP_WEBP_TYPES_H_ */ diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/LICENSE.webp.txt b/src/SDL2/Xcode/Frameworks/webp.framework/LICENSE.webp.txt new file mode 100644 index 000000000..15993f839 --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/LICENSE.webp.txt @@ -0,0 +1,34 @@ +The source code to this library used with SDL_image can be found here: +http://www.libsdl.org/projects/SDL_image/libs/ +--- + +Copyright (c) 2010, Google Inc. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + * Neither the name of Google nor the names of its contributors may + be used to endorse or promote products derived from this software + without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Resources/English.lproj/InfoPlist.strings b/src/SDL2/Xcode/Frameworks/webp.framework/Resources/English.lproj/InfoPlist.strings new file mode 100644 index 0000000000000000000000000000000000000000..680c8e552128626bbd177f4cd7acb55afdf00561 GIT binary patch literal 492 zcma)&OACTf6ohBpuMn3JJ(tm@pa(>Yg!aCAP^qXD_2aAWDkOwK$o1$sb7$tv^QDfO zvb0nzU#?C%=%G*ny(=|UMkiK8wWwR(3;wozx0Mw5OgY^n=zD=`!r9=NXsWR;paXEB zR`8#xmPQ=Axa;Xg$Aih%u;z}VJxVDG8*r5yhfa#KNV^YT7e_tL;0Mh(Ql-#Bb%L{mosEwjK1~XJFg=c$&zQ$d%zK>T>L!0`z5$gMQPuze literal 0 HcmV?d00001 diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Resources/Info.plist b/src/SDL2/Xcode/Frameworks/webp.framework/Resources/Info.plist new file mode 100644 index 000000000..0f80968d0 --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Resources/Info.plist @@ -0,0 +1,24 @@ + + + + + CFBundleDevelopmentRegion + English + CFBundleExecutable + webp + CFBundleGetInfoString + libwebp 0.1.3 + CFBundleInfoDictionaryVersion + 6.0 + CFBundleName + webp + CFBundlePackageType + FMWK + CFBundleShortVersionString + 0.1.3 + CFBundleSignature + ???? + CFBundleVersion + 0.1.3 + + diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/decode.h b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/decode.h new file mode 100644 index 000000000..fc2a83aba --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/decode.h @@ -0,0 +1,488 @@ +// Copyright 2010 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// Main decoding functions for WebP images. +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_DECODE_H_ +#define WEBP_WEBP_DECODE_H_ + +#include "./types.h" + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +#define WEBP_DECODER_ABI_VERSION 0x0201 // MAJOR(8b) + MINOR(8b) + +// Note: forward declaring enumerations is not allowed in (strict) C and C++, +// the types are left here for reference. +// typedef enum VP8StatusCode VP8StatusCode; +// typedef enum WEBP_CSP_MODE WEBP_CSP_MODE; +typedef struct WebPRGBABuffer WebPRGBABuffer; +typedef struct WebPYUVABuffer WebPYUVABuffer; +typedef struct WebPDecBuffer WebPDecBuffer; +typedef struct WebPIDecoder WebPIDecoder; +typedef struct WebPBitstreamFeatures WebPBitstreamFeatures; +typedef struct WebPDecoderOptions WebPDecoderOptions; +typedef struct WebPDecoderConfig WebPDecoderConfig; + +// Return the decoder's version number, packed in hexadecimal using 8bits for +// each of major/minor/revision. E.g: v2.5.7 is 0x020507. +WEBP_EXTERN(int) WebPGetDecoderVersion(void); + +// Retrieve basic header information: width, height. +// This function will also validate the header and return 0 in +// case of formatting error. +// Pointers 'width' and 'height' can be passed NULL if deemed irrelevant. +WEBP_EXTERN(int) WebPGetInfo(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Decodes WebP images pointed to by 'data' and returns RGBA samples, along +// with the dimensions in *width and *height. The ordering of samples in +// memory is R, G, B, A, R, G, B, A... in scan order (endian-independent). +// The returned pointer should be deleted calling free(). +// Returns NULL in case of error. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBA(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning A, R, G, B, A, R, G, B... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeARGB(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning B, G, R, A, B, G, R, A... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeBGRA(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning R, G, B, R, G, B... ordered data. +// If the bitstream contains transparency, it is ignored. +WEBP_EXTERN(uint8_t*) WebPDecodeRGB(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGB, but returning B, G, R, B, G, R... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeBGR(const uint8_t* data, size_t data_size, + int* width, int* height); + + +// Decode WebP images pointed to by 'data' to Y'UV format(*). The pointer +// returned is the Y samples buffer. Upon return, *u and *v will point to +// the U and V chroma data. These U and V buffers need NOT be free()'d, +// unlike the returned Y luma one. The dimension of the U and V planes +// are both (*width + 1) / 2 and (*height + 1)/ 2. +// Upon return, the Y buffer has a stride returned as '*stride', while U and V +// have a common stride returned as '*uv_stride'. +// Return NULL in case of error. +// (*) Also named Y'CbCr. See: http://en.wikipedia.org/wiki/YCbCr +WEBP_EXTERN(uint8_t*) WebPDecodeYUV(const uint8_t* data, size_t data_size, + int* width, int* height, + uint8_t** u, uint8_t** v, + int* stride, int* uv_stride); + +// These five functions are variants of the above ones, that decode the image +// directly into a pre-allocated buffer 'output_buffer'. The maximum storage +// available in this buffer is indicated by 'output_buffer_size'. If this +// storage is not sufficient (or an error occurred), NULL is returned. +// Otherwise, output_buffer is returned, for convenience. +// The parameter 'output_stride' specifies the distance (in bytes) +// between scanlines. Hence, output_buffer_size is expected to be at least +// output_stride x picture-height. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBAInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeARGBInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeBGRAInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// RGB and BGR variants. Here too the transparency information, if present, +// will be dropped and ignored. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeBGRInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// WebPDecodeYUVInto() is a variant of WebPDecodeYUV() that operates directly +// into pre-allocated luma/chroma plane buffers. This function requires the +// strides to be passed: one for the luma plane and one for each of the +// chroma ones. The size of each plane buffer is passed as 'luma_size', +// 'u_size' and 'v_size' respectively. +// Pointer to the luma plane ('*luma') is returned or NULL if an error occurred +// during decoding (or because some buffers were found to be too small). +WEBP_EXTERN(uint8_t*) WebPDecodeYUVInto( + const uint8_t* data, size_t data_size, + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride); + +//------------------------------------------------------------------------------ +// Output colorspaces and buffer + +// Colorspaces +// Note: the naming describes the byte-ordering of packed samples in memory. +// For instance, MODE_BGRA relates to samples ordered as B,G,R,A,B,G,R,A,... +// Non-capital names (e.g.:MODE_Argb) relates to pre-multiplied RGB channels. +// RGBA-4444 and RGB-565 colorspaces are represented by following byte-order: +// RGBA-4444: [r3 r2 r1 r0 g3 g2 g1 g0], [b3 b2 b1 b0 a3 a2 a1 a0], ... +// RGB-565: [r4 r3 r2 r1 r0 g5 g4 g3], [g2 g1 g0 b4 b3 b2 b1 b0], ... +// In the case WEBP_SWAP_16BITS_CSP is defined, the bytes are swapped for +// these two modes: +// RGBA-4444: [b3 b2 b1 b0 a3 a2 a1 a0], [r3 r2 r1 r0 g3 g2 g1 g0], ... +// RGB-565: [g2 g1 g0 b4 b3 b2 b1 b0], [r4 r3 r2 r1 r0 g5 g4 g3], ... + +typedef enum WEBP_CSP_MODE { + MODE_RGB = 0, MODE_RGBA = 1, + MODE_BGR = 2, MODE_BGRA = 3, + MODE_ARGB = 4, MODE_RGBA_4444 = 5, + MODE_RGB_565 = 6, + // RGB-premultiplied transparent modes (alpha value is preserved) + MODE_rgbA = 7, + MODE_bgrA = 8, + MODE_Argb = 9, + MODE_rgbA_4444 = 10, + // YUV modes must come after RGB ones. + MODE_YUV = 11, MODE_YUVA = 12, // yuv 4:2:0 + MODE_LAST = 13 +} WEBP_CSP_MODE; + +// Some useful macros: +static WEBP_INLINE int WebPIsPremultipliedMode(WEBP_CSP_MODE mode) { + return (mode == MODE_rgbA || mode == MODE_bgrA || mode == MODE_Argb || + mode == MODE_rgbA_4444); +} + +static WEBP_INLINE int WebPIsAlphaMode(WEBP_CSP_MODE mode) { + return (mode == MODE_RGBA || mode == MODE_BGRA || mode == MODE_ARGB || + mode == MODE_RGBA_4444 || mode == MODE_YUVA || + WebPIsPremultipliedMode(mode)); +} + +static WEBP_INLINE int WebPIsRGBMode(WEBP_CSP_MODE mode) { + return (mode < MODE_YUV); +} + +//------------------------------------------------------------------------------ +// WebPDecBuffer: Generic structure for describing the output sample buffer. + +struct WebPRGBABuffer { // view as RGBA + uint8_t* rgba; // pointer to RGBA samples + int stride; // stride in bytes from one scanline to the next. + size_t size; // total size of the *rgba buffer. +}; + +struct WebPYUVABuffer { // view as YUVA + uint8_t* y, *u, *v, *a; // pointer to luma, chroma U/V, alpha samples + int y_stride; // luma stride + int u_stride, v_stride; // chroma strides + int a_stride; // alpha stride + size_t y_size; // luma plane size + size_t u_size, v_size; // chroma planes size + size_t a_size; // alpha-plane size +}; + +// Output buffer +struct WebPDecBuffer { + WEBP_CSP_MODE colorspace; // Colorspace. + int width, height; // Dimensions. + int is_external_memory; // If true, 'internal_memory' pointer is not used. + union { + WebPRGBABuffer RGBA; + WebPYUVABuffer YUVA; + } u; // Nameless union of buffer parameters. + uint32_t pad[4]; // padding for later use + + uint8_t* private_memory; // Internally allocated memory (only when + // is_external_memory is false). Should not be used + // externally, but accessed via the buffer union. +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPInitDecBufferInternal(WebPDecBuffer*, int); + +// Initialize the structure as empty. Must be called before any other use. +// Returns false in case of version mismatch +static WEBP_INLINE int WebPInitDecBuffer(WebPDecBuffer* buffer) { + return WebPInitDecBufferInternal(buffer, WEBP_DECODER_ABI_VERSION); +} + +// Free any memory associated with the buffer. Must always be called last. +// Note: doesn't free the 'buffer' structure itself. +WEBP_EXTERN(void) WebPFreeDecBuffer(WebPDecBuffer* buffer); + +//------------------------------------------------------------------------------ +// Enumeration of the status codes + +typedef enum VP8StatusCode { + VP8_STATUS_OK = 0, + VP8_STATUS_OUT_OF_MEMORY, + VP8_STATUS_INVALID_PARAM, + VP8_STATUS_BITSTREAM_ERROR, + VP8_STATUS_UNSUPPORTED_FEATURE, + VP8_STATUS_SUSPENDED, + VP8_STATUS_USER_ABORT, + VP8_STATUS_NOT_ENOUGH_DATA +} VP8StatusCode; + +//------------------------------------------------------------------------------ +// Incremental decoding +// +// This API allows streamlined decoding of partial data. +// Picture can be incrementally decoded as data become available thanks to the +// WebPIDecoder object. This object can be left in a SUSPENDED state if the +// picture is only partially decoded, pending additional input. +// Code example: +// +// WebPInitDecBuffer(&buffer); +// buffer.colorspace = mode; +// ... +// WebPIDecoder* idec = WebPINewDecoder(&buffer); +// while (has_more_data) { +// // ... (get additional data) +// status = WebPIAppend(idec, new_data, new_data_size); +// if (status != VP8_STATUS_SUSPENDED || +// break; +// } +// +// // The above call decodes the current available buffer. +// // Part of the image can now be refreshed by calling to +// // WebPIDecGetRGB()/WebPIDecGetYUVA() etc. +// } +// WebPIDelete(idec); + +// Creates a new incremental decoder with the supplied buffer parameter. +// This output_buffer can be passed NULL, in which case a default output buffer +// is used (with MODE_RGB). Otherwise, an internal reference to 'output_buffer' +// is kept, which means that the lifespan of 'output_buffer' must be larger than +// that of the returned WebPIDecoder object. +// The supplied 'output_buffer' content MUST NOT be changed between calls to +// WebPIAppend() or WebPIUpdate() unless 'output_buffer.is_external_memory' is +// set to 1. In such a case, it is allowed to modify the pointers, size and +// stride of output_buffer.u.RGBA or output_buffer.u.YUVA, provided they remain +// within valid bounds. +// All other fields of WebPDecBuffer MUST remain constant between calls. +// Returns NULL if the allocation failed. +WEBP_EXTERN(WebPIDecoder*) WebPINewDecoder(WebPDecBuffer* output_buffer); + +// This function allocates and initializes an incremental-decoder object, which +// will output the RGB/A samples specified by 'csp' into a preallocated +// buffer 'output_buffer'. The size of this buffer is at least +// 'output_buffer_size' and the stride (distance in bytes between two scanlines) +// is specified by 'output_stride'. +// Additionally, output_buffer can be passed NULL in which case the output +// buffer will be allocated automatically when the decoding starts. The +// colorspace 'csp' is taken into account for allocating this buffer. All other +// parameters are ignored. +// Returns NULL if the allocation failed, or if some parameters are invalid. +WEBP_EXTERN(WebPIDecoder*) WebPINewRGB( + WEBP_CSP_MODE csp, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// This function allocates and initializes an incremental-decoder object, which +// will output the raw luma/chroma samples into a preallocated planes if +// supplied. The luma plane is specified by its pointer 'luma', its size +// 'luma_size' and its stride 'luma_stride'. Similarly, the chroma-u plane +// is specified by the 'u', 'u_size' and 'u_stride' parameters, and the chroma-v +// plane by 'v' and 'v_size'. And same for the alpha-plane. The 'a' pointer +// can be pass NULL in case one is not interested in the transparency plane. +// Conversely, 'luma' can be passed NULL if no preallocated planes are supplied. +// In this case, the output buffer will be automatically allocated (using +// MODE_YUVA) when decoding starts. All parameters are then ignored. +// Returns NULL if the allocation failed or if a parameter is invalid. +WEBP_EXTERN(WebPIDecoder*) WebPINewYUVA( + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride, + uint8_t* a, size_t a_size, int a_stride); + +// Deprecated version of the above, without the alpha plane. +// Kept for backward compatibility. +WEBP_EXTERN(WebPIDecoder*) WebPINewYUV( + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride); + +// Deletes the WebPIDecoder object and associated memory. Must always be called +// if WebPINewDecoder, WebPINewRGB or WebPINewYUV succeeded. +WEBP_EXTERN(void) WebPIDelete(WebPIDecoder* idec); + +// Copies and decodes the next available data. Returns VP8_STATUS_OK when +// the image is successfully decoded. Returns VP8_STATUS_SUSPENDED when more +// data is expected. Returns error in other cases. +WEBP_EXTERN(VP8StatusCode) WebPIAppend( + WebPIDecoder* idec, const uint8_t* data, size_t data_size); + +// A variant of the above function to be used when data buffer contains +// partial data from the beginning. In this case data buffer is not copied +// to the internal memory. +// Note that the value of the 'data' pointer can change between calls to +// WebPIUpdate, for instance when the data buffer is resized to fit larger data. +WEBP_EXTERN(VP8StatusCode) WebPIUpdate( + WebPIDecoder* idec, const uint8_t* data, size_t data_size); + +// Returns the RGB/A image decoded so far. Returns NULL if output params +// are not initialized yet. The RGB/A output type corresponds to the colorspace +// specified during call to WebPINewDecoder() or WebPINewRGB(). +// *last_y is the index of last decoded row in raster scan order. Some pointers +// (*last_y, *width etc.) can be NULL if corresponding information is not +// needed. +WEBP_EXTERN(uint8_t*) WebPIDecGetRGB( + const WebPIDecoder* idec, int* last_y, + int* width, int* height, int* stride); + +// Same as above function to get a YUVA image. Returns pointer to the luma +// plane or NULL in case of error. If there is no alpha information +// the alpha pointer '*a' will be returned NULL. +WEBP_EXTERN(uint8_t*) WebPIDecGetYUVA( + const WebPIDecoder* idec, int* last_y, + uint8_t** u, uint8_t** v, uint8_t** a, + int* width, int* height, int* stride, int* uv_stride, int* a_stride); + +// Deprecated alpha-less version of WebPIDecGetYUVA(): it will ignore the +// alpha information (if present). Kept for backward compatibility. +static WEBP_INLINE uint8_t* WebPIDecGetYUV( + const WebPIDecoder* idec, int* last_y, uint8_t** u, uint8_t** v, + int* width, int* height, int* stride, int* uv_stride) { + return WebPIDecGetYUVA(idec, last_y, u, v, NULL, width, height, + stride, uv_stride, NULL); +} + +// Generic call to retrieve information about the displayable area. +// If non NULL, the left/right/width/height pointers are filled with the visible +// rectangular area so far. +// Returns NULL in case the incremental decoder object is in an invalid state. +// Otherwise returns the pointer to the internal representation. This structure +// is read-only, tied to WebPIDecoder's lifespan and should not be modified. +WEBP_EXTERN(const WebPDecBuffer*) WebPIDecodedArea( + const WebPIDecoder* idec, int* left, int* top, int* width, int* height); + +//------------------------------------------------------------------------------ +// Advanced decoding parametrization +// +// Code sample for using the advanced decoding API +/* + // A) Init a configuration object + WebPDecoderConfig config; + CHECK(WebPInitDecoderConfig(&config)); + + // B) optional: retrieve the bitstream's features. + CHECK(WebPGetFeatures(data, data_size, &config.input) == VP8_STATUS_OK); + + // C) Adjust 'config', if needed + config.no_fancy_upsampling = 1; + config.output.colorspace = MODE_BGRA; + // etc. + + // Note that you can also make config.output point to an externally + // supplied memory buffer, provided it's big enough to store the decoded + // picture. Otherwise, config.output will just be used to allocate memory + // and store the decoded picture. + + // D) Decode! + CHECK(WebPDecode(data, data_size, &config) == VP8_STATUS_OK); + + // E) Decoded image is now in config.output (and config.output.u.RGBA) + + // F) Reclaim memory allocated in config's object. It's safe to call + // this function even if the memory is external and wasn't allocated + // by WebPDecode(). + WebPFreeDecBuffer(&config.output); +*/ + +// Features gathered from the bitstream +struct WebPBitstreamFeatures { + int width; // Width in pixels, as read from the bitstream. + int height; // Height in pixels, as read from the bitstream. + int has_alpha; // True if the bitstream contains an alpha channel. + int has_animation; // True if the bitstream is an animation. + + // Unused for now: + int bitstream_version; // should be 0 for now. TODO(later) + int no_incremental_decoding; // if true, using incremental decoding is not + // recommended. + int rotate; // TODO(later) + int uv_sampling; // should be 0 for now. TODO(later) + uint32_t pad[2]; // padding for later use +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(VP8StatusCode) WebPGetFeaturesInternal( + const uint8_t*, size_t, WebPBitstreamFeatures*, int); + +// Retrieve features from the bitstream. The *features structure is filled +// with information gathered from the bitstream. +// Returns VP8_STATUS_OK when the features are successfully retrieved. Returns +// VP8_STATUS_NOT_ENOUGH_DATA when more data is needed to retrieve the +// features from headers. Returns error in other cases. +static WEBP_INLINE VP8StatusCode WebPGetFeatures( + const uint8_t* data, size_t data_size, + WebPBitstreamFeatures* features) { + return WebPGetFeaturesInternal(data, data_size, features, + WEBP_DECODER_ABI_VERSION); +} + +// Decoding options +struct WebPDecoderOptions { + int bypass_filtering; // if true, skip the in-loop filtering + int no_fancy_upsampling; // if true, use faster pointwise upsampler + int use_cropping; // if true, cropping is applied _first_ + int crop_left, crop_top; // top-left position for cropping. + // Will be snapped to even values. + int crop_width, crop_height; // dimension of the cropping area + int use_scaling; // if true, scaling is applied _afterward_ + int scaled_width, scaled_height; // final resolution + int use_threads; // if true, use multi-threaded decoding + + // Unused for now: + int force_rotation; // forced rotation (to be applied _last_) + int no_enhancement; // if true, discard enhancement layer + uint32_t pad[6]; // padding for later use +}; + +// Main object storing the configuration for advanced decoding. +struct WebPDecoderConfig { + WebPBitstreamFeatures input; // Immutable bitstream features (optional) + WebPDecBuffer output; // Output buffer (can point to external mem) + WebPDecoderOptions options; // Decoding options +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPInitDecoderConfigInternal(WebPDecoderConfig*, int); + +// Initialize the configuration as empty. This function must always be +// called first, unless WebPGetFeatures() is to be called. +// Returns false in case of mismatched version. +static WEBP_INLINE int WebPInitDecoderConfig(WebPDecoderConfig* config) { + return WebPInitDecoderConfigInternal(config, WEBP_DECODER_ABI_VERSION); +} + +// Instantiate a new incremental decoder object with the requested +// configuration. The bitstream can be passed using 'data' and 'data_size' +// parameter, in which case the features will be parsed and stored into +// config->input. Otherwise, 'data' can be NULL and no parsing will occur. +// Note that 'config' can be NULL too, in which case a default configuration +// is used. +// The return WebPIDecoder object must always be deleted calling WebPIDelete(). +// Returns NULL in case of error (and config->status will then reflect +// the error condition). +WEBP_EXTERN(WebPIDecoder*) WebPIDecode(const uint8_t* data, size_t data_size, + WebPDecoderConfig* config); + +// Non-incremental version. This version decodes the full data at once, taking +// 'config' into account. Returns decoding status (which should be VP8_STATUS_OK +// if the decoding was successful). +WEBP_EXTERN(VP8StatusCode) WebPDecode(const uint8_t* data, size_t data_size, + WebPDecoderConfig* config); + +#if defined(__cplusplus) || defined(c_plusplus) +} // extern "C" +#endif + +#endif /* WEBP_WEBP_DECODE_H_ */ diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/encode.h b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/encode.h new file mode 100644 index 000000000..d635fcf0e --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/encode.h @@ -0,0 +1,485 @@ +// Copyright 2011 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// WebP encoder: main interface +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_ENCODE_H_ +#define WEBP_WEBP_ENCODE_H_ + +#include "./types.h" + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +#define WEBP_ENCODER_ABI_VERSION 0x0201 // MAJOR(8b) + MINOR(8b) + +// Note: forward declaring enumerations is not allowed in (strict) C and C++, +// the types are left here for reference. +// typedef enum WebPImageHint WebPImageHint; +// typedef enum WebPEncCSP WebPEncCSP; +// typedef enum WebPPreset WebPPreset; +// typedef enum WebPEncodingError WebPEncodingError; +typedef struct WebPConfig WebPConfig; +typedef struct WebPPicture WebPPicture; // main structure for I/O +typedef struct WebPAuxStats WebPAuxStats; +typedef struct WebPMemoryWriter WebPMemoryWriter; + +// Return the encoder's version number, packed in hexadecimal using 8bits for +// each of major/minor/revision. E.g: v2.5.7 is 0x020507. +WEBP_EXTERN(int) WebPGetEncoderVersion(void); + +//------------------------------------------------------------------------------ +// One-stop-shop call! No questions asked: + +// Returns the size of the compressed data (pointed to by *output), or 0 if +// an error occurred. The compressed data must be released by the caller +// using the call 'free(*output)'. +// These functions compress using the lossy format, and the quality_factor +// can go from 0 (smaller output, lower quality) to 100 (best quality, +// larger output). +WEBP_EXTERN(size_t) WebPEncodeRGB(const uint8_t* rgb, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeBGR(const uint8_t* bgr, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeRGBA(const uint8_t* rgba, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeBGRA(const uint8_t* bgra, + int width, int height, int stride, + float quality_factor, uint8_t** output); + +// These functions are the equivalent of the above, but compressing in a +// lossless manner. Files are usually larger than lossy format, but will +// not suffer any compression loss. +WEBP_EXTERN(size_t) WebPEncodeLosslessRGB(const uint8_t* rgb, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessBGR(const uint8_t* bgr, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessRGBA(const uint8_t* rgba, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessBGRA(const uint8_t* bgra, + int width, int height, int stride, + uint8_t** output); + +//------------------------------------------------------------------------------ +// Coding parameters + +// Image characteristics hint for the underlying encoder. +typedef enum WebPImageHint { + WEBP_HINT_DEFAULT = 0, // default preset. + WEBP_HINT_PICTURE, // digital picture, like portrait, inner shot + WEBP_HINT_PHOTO, // outdoor photograph, with natural lighting + WEBP_HINT_GRAPH, // Discrete tone image (graph, map-tile etc). + WEBP_HINT_LAST +} WebPImageHint; + +// Compression parameters. +struct WebPConfig { + int lossless; // Lossless encoding (0=lossy(default), 1=lossless). + float quality; // between 0 (smallest file) and 100 (biggest) + int method; // quality/speed trade-off (0=fast, 6=slower-better) + + WebPImageHint image_hint; // Hint for image type (lossless only for now). + + // Parameters related to lossy compression only: + int target_size; // if non-zero, set the desired target size in bytes. + // Takes precedence over the 'compression' parameter. + float target_PSNR; // if non-zero, specifies the minimal distortion to + // try to achieve. Takes precedence over target_size. + int segments; // maximum number of segments to use, in [1..4] + int sns_strength; // Spatial Noise Shaping. 0=off, 100=maximum. + int filter_strength; // range: [0 = off .. 100 = strongest] + int filter_sharpness; // range: [0 = off .. 7 = least sharp] + int filter_type; // filtering type: 0 = simple, 1 = strong (only used + // if filter_strength > 0 or autofilter > 0) + int autofilter; // Auto adjust filter's strength [0 = off, 1 = on] + int alpha_compression; // Algorithm for encoding the alpha plane (0 = none, + // 1 = compressed with WebP lossless). Default is 1. + int alpha_filtering; // Predictive filtering method for alpha plane. + // 0: none, 1: fast, 2: best. Default if 1. + int alpha_quality; // Between 0 (smallest size) and 100 (lossless). + // Default is 100. + int pass; // number of entropy-analysis passes (in [1..10]). + + int show_compressed; // if true, export the compressed picture back. + // In-loop filtering is not applied. + int preprocessing; // preprocessing filter (0=none, 1=segment-smooth) + int partitions; // log2(number of token partitions) in [0..3]. Default + // is set to 0 for easier progressive decoding. + int partition_limit; // quality degradation allowed to fit the 512k limit + // on prediction modes coding (0: no degradation, + // 100: maximum possible degradation). + int emulate_jpeg_size; // If true, compression parameters will be remapped + // to better match the expected output size from + // JPEG compression. Generally, the output size will + // be similar but the degradation will be lower. + int thread_level; // If non-zero, try and use multi-threaded encoding. + int low_memory; // If set, reduce memory usage (but increase CPU use). + + uint32_t pad[5]; // padding for later use +}; + +// Enumerate some predefined settings for WebPConfig, depending on the type +// of source picture. These presets are used when calling WebPConfigPreset(). +typedef enum WebPPreset { + WEBP_PRESET_DEFAULT = 0, // default preset. + WEBP_PRESET_PICTURE, // digital picture, like portrait, inner shot + WEBP_PRESET_PHOTO, // outdoor photograph, with natural lighting + WEBP_PRESET_DRAWING, // hand or line drawing, with high-contrast details + WEBP_PRESET_ICON, // small-sized colorful images + WEBP_PRESET_TEXT // text-like +} WebPPreset; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPConfigInitInternal(WebPConfig*, WebPPreset, float, int); + +// Should always be called, to initialize a fresh WebPConfig structure before +// modification. Returns false in case of version mismatch. WebPConfigInit() +// must have succeeded before using the 'config' object. +// Note that the default values are lossless=0 and quality=75. +static WEBP_INLINE int WebPConfigInit(WebPConfig* config) { + return WebPConfigInitInternal(config, WEBP_PRESET_DEFAULT, 75.f, + WEBP_ENCODER_ABI_VERSION); +} + +// This function will initialize the configuration according to a predefined +// set of parameters (referred to by 'preset') and a given quality factor. +// This function can be called as a replacement to WebPConfigInit(). Will +// return false in case of error. +static WEBP_INLINE int WebPConfigPreset(WebPConfig* config, + WebPPreset preset, float quality) { + return WebPConfigInitInternal(config, preset, quality, + WEBP_ENCODER_ABI_VERSION); +} + +// Returns true if 'config' is non-NULL and all configuration parameters are +// within their valid ranges. +WEBP_EXTERN(int) WebPValidateConfig(const WebPConfig* config); + +//------------------------------------------------------------------------------ +// Input / Output +// Structure for storing auxiliary statistics (mostly for lossy encoding). + +struct WebPAuxStats { + int coded_size; // final size + + float PSNR[5]; // peak-signal-to-noise ratio for Y/U/V/All/Alpha + int block_count[3]; // number of intra4/intra16/skipped macroblocks + int header_bytes[2]; // approximate number of bytes spent for header + // and mode-partition #0 + int residual_bytes[3][4]; // approximate number of bytes spent for + // DC/AC/uv coefficients for each (0..3) segments. + int segment_size[4]; // number of macroblocks in each segments + int segment_quant[4]; // quantizer values for each segments + int segment_level[4]; // filtering strength for each segments [0..63] + + int alpha_data_size; // size of the transparency data + int layer_data_size; // size of the enhancement layer data + + // lossless encoder statistics + uint32_t lossless_features; // bit0:predictor bit1:cross-color transform + // bit2:subtract-green bit3:color indexing + int histogram_bits; // number of precision bits of histogram + int transform_bits; // precision bits for transform + int cache_bits; // number of bits for color cache lookup + int palette_size; // number of color in palette, if used + int lossless_size; // final lossless size + + uint32_t pad[4]; // padding for later use +}; + +// Signature for output function. Should return true if writing was successful. +// data/data_size is the segment of data to write, and 'picture' is for +// reference (and so one can make use of picture->custom_ptr). +typedef int (*WebPWriterFunction)(const uint8_t* data, size_t data_size, + const WebPPicture* picture); + +// WebPMemoryWrite: a special WebPWriterFunction that writes to memory using +// the following WebPMemoryWriter object (to be set as a custom_ptr). +struct WebPMemoryWriter { + uint8_t* mem; // final buffer (of size 'max_size', larger than 'size'). + size_t size; // final size + size_t max_size; // total capacity + uint32_t pad[1]; // padding for later use +}; + +// The following must be called first before any use. +WEBP_EXTERN(void) WebPMemoryWriterInit(WebPMemoryWriter* writer); + +// The custom writer to be used with WebPMemoryWriter as custom_ptr. Upon +// completion, writer.mem and writer.size will hold the coded data. +// writer.mem must be freed using the call 'free(writer.mem)'. +WEBP_EXTERN(int) WebPMemoryWrite(const uint8_t* data, size_t data_size, + const WebPPicture* picture); + +// Progress hook, called from time to time to report progress. It can return +// false to request an abort of the encoding process, or true otherwise if +// everything is OK. +typedef int (*WebPProgressHook)(int percent, const WebPPicture* picture); + +// Color spaces. +typedef enum WebPEncCSP { + // chroma sampling + WEBP_YUV420 = 0, // 4:2:0 + WEBP_YUV422 = 1, // 4:2:2 + WEBP_YUV444 = 2, // 4:4:4 + WEBP_YUV400 = 3, // grayscale + WEBP_CSP_UV_MASK = 3, // bit-mask to get the UV sampling factors + // alpha channel variants + WEBP_YUV420A = 4, + WEBP_YUV422A = 5, + WEBP_YUV444A = 6, + WEBP_YUV400A = 7, // grayscale + alpha + WEBP_CSP_ALPHA_BIT = 4 // bit that is set if alpha is present +} WebPEncCSP; + +// Encoding error conditions. +typedef enum WebPEncodingError { + VP8_ENC_OK = 0, + VP8_ENC_ERROR_OUT_OF_MEMORY, // memory error allocating objects + VP8_ENC_ERROR_BITSTREAM_OUT_OF_MEMORY, // memory error while flushing bits + VP8_ENC_ERROR_NULL_PARAMETER, // a pointer parameter is NULL + VP8_ENC_ERROR_INVALID_CONFIGURATION, // configuration is invalid + VP8_ENC_ERROR_BAD_DIMENSION, // picture has invalid width/height + VP8_ENC_ERROR_PARTITION0_OVERFLOW, // partition is bigger than 512k + VP8_ENC_ERROR_PARTITION_OVERFLOW, // partition is bigger than 16M + VP8_ENC_ERROR_BAD_WRITE, // error while flushing bytes + VP8_ENC_ERROR_FILE_TOO_BIG, // file is bigger than 4G + VP8_ENC_ERROR_USER_ABORT, // abort request by user + VP8_ENC_ERROR_LAST // list terminator. always last. +} WebPEncodingError; + +// maximum width/height allowed (inclusive), in pixels +#define WEBP_MAX_DIMENSION 16383 + +// Main exchange structure (input samples, output bytes, statistics) +struct WebPPicture { + // INPUT + ////////////// + // Main flag for encoder selecting between ARGB or YUV input. + // It is recommended to use ARGB input (*argb, argb_stride) for lossless + // compression, and YUV input (*y, *u, *v, etc.) for lossy compression + // since these are the respective native colorspace for these formats. + int use_argb; + + // YUV input (mostly used for input to lossy compression) + WebPEncCSP colorspace; // colorspace: should be YUV420 for now (=Y'CbCr). + int width, height; // dimensions (less or equal to WEBP_MAX_DIMENSION) + uint8_t *y, *u, *v; // pointers to luma/chroma planes. + int y_stride, uv_stride; // luma/chroma strides. + uint8_t* a; // pointer to the alpha plane + int a_stride; // stride of the alpha plane + uint32_t pad1[2]; // padding for later use + + // ARGB input (mostly used for input to lossless compression) + uint32_t* argb; // Pointer to argb (32 bit) plane. + int argb_stride; // This is stride in pixels units, not bytes. + uint32_t pad2[3]; // padding for later use + + // OUTPUT + /////////////// + // Byte-emission hook, to store compressed bytes as they are ready. + WebPWriterFunction writer; // can be NULL + void* custom_ptr; // can be used by the writer. + + // map for extra information (only for lossy compression mode) + int extra_info_type; // 1: intra type, 2: segment, 3: quant + // 4: intra-16 prediction mode, + // 5: chroma prediction mode, + // 6: bit cost, 7: distortion + uint8_t* extra_info; // if not NULL, points to an array of size + // ((width + 15) / 16) * ((height + 15) / 16) that + // will be filled with a macroblock map, depending + // on extra_info_type. + + // STATS AND REPORTS + /////////////////////////// + // Pointer to side statistics (updated only if not NULL) + WebPAuxStats* stats; + + // Error code for the latest error encountered during encoding + WebPEncodingError error_code; + + // If not NULL, report progress during encoding. + WebPProgressHook progress_hook; + + void* user_data; // this field is free to be set to any value and + // used during callbacks (like progress-report e.g.). + + uint32_t pad3[3]; // padding for later use + + // Unused for now: original samples (for non-YUV420 modes) + uint8_t *u0, *v0; + int uv0_stride; + + uint32_t pad4[7]; // padding for later use + + // PRIVATE FIELDS + //////////////////// + void* memory_; // row chunk of memory for yuva planes + void* memory_argb_; // and for argb too. + void* pad5[2]; // padding for later use +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPPictureInitInternal(WebPPicture*, int); + +// Should always be called, to initialize the structure. Returns false in case +// of version mismatch. WebPPictureInit() must have succeeded before using the +// 'picture' object. +// Note that, by default, use_argb is false and colorspace is WEBP_YUV420. +static WEBP_INLINE int WebPPictureInit(WebPPicture* picture) { + return WebPPictureInitInternal(picture, WEBP_ENCODER_ABI_VERSION); +} + +//------------------------------------------------------------------------------ +// WebPPicture utils + +// Convenience allocation / deallocation based on picture->width/height: +// Allocate y/u/v buffers as per colorspace/width/height specification. +// Note! This function will free the previous buffer if needed. +// Returns false in case of memory error. +WEBP_EXTERN(int) WebPPictureAlloc(WebPPicture* picture); + +// Release the memory allocated by WebPPictureAlloc() or WebPPictureImport*(). +// Note that this function does _not_ free the memory used by the 'picture' +// object itself. +// Besides memory (which is reclaimed) all other fields of 'picture' are +// preserved. +WEBP_EXTERN(void) WebPPictureFree(WebPPicture* picture); + +// Copy the pixels of *src into *dst, using WebPPictureAlloc. Upon return, +// *dst will fully own the copied pixels (this is not a view). +// Returns false in case of memory allocation error. +WEBP_EXTERN(int) WebPPictureCopy(const WebPPicture* src, WebPPicture* dst); + +// Compute PSNR, SSIM or LSIM distortion metric between two pictures. +// Result is in dB, stores in result[] in the Y/U/V/Alpha/All order. +// Returns false in case of error (src and ref don't have same dimension, ...) +// Warning: this function is rather CPU-intensive. +WEBP_EXTERN(int) WebPPictureDistortion( + const WebPPicture* src, const WebPPicture* ref, + int metric_type, // 0 = PSNR, 1 = SSIM, 2 = LSIM + float result[5]); + +// self-crops a picture to the rectangle defined by top/left/width/height. +// Returns false in case of memory allocation error, or if the rectangle is +// outside of the source picture. +// The rectangle for the view is defined by the top-left corner pixel +// coordinates (left, top) as well as its width and height. This rectangle +// must be fully be comprised inside the 'src' source picture. If the source +// picture uses the YUV420 colorspace, the top and left coordinates will be +// snapped to even values. +WEBP_EXTERN(int) WebPPictureCrop(WebPPicture* picture, + int left, int top, int width, int height); + +// Extracts a view from 'src' picture into 'dst'. The rectangle for the view +// is defined by the top-left corner pixel coordinates (left, top) as well +// as its width and height. This rectangle must be fully be comprised inside +// the 'src' source picture. If the source picture uses the YUV420 colorspace, +// the top and left coordinates will be snapped to even values. +// Picture 'src' must out-live 'dst' picture. Self-extraction of view is allowed +// ('src' equal to 'dst') as a mean of fast-cropping (but note that doing so, +// the original dimension will be lost). +// Returns false in case of memory allocation error or invalid parameters. +WEBP_EXTERN(int) WebPPictureView(const WebPPicture* src, + int left, int top, int width, int height, + WebPPicture* dst); + +// Returns true if the 'picture' is actually a view and therefore does +// not own the memory for pixels. +WEBP_EXTERN(int) WebPPictureIsView(const WebPPicture* picture); + +// Rescale a picture to new dimension width x height. +// Now gamma correction is applied. +// Returns false in case of error (invalid parameter or insufficient memory). +WEBP_EXTERN(int) WebPPictureRescale(WebPPicture* pic, int width, int height); + +// Colorspace conversion function to import RGB samples. +// Previous buffer will be free'd, if any. +// *rgb buffer should have a size of at least height * rgb_stride. +// Returns false in case of memory error. +WEBP_EXTERN(int) WebPPictureImportRGB( + WebPPicture* picture, const uint8_t* rgb, int rgb_stride); +// Same, but for RGBA buffer. +WEBP_EXTERN(int) WebPPictureImportRGBA( + WebPPicture* picture, const uint8_t* rgba, int rgba_stride); +// Same, but for RGBA buffer. Imports the RGB direct from the 32-bit format +// input buffer ignoring the alpha channel. Avoids needing to copy the data +// to a temporary 24-bit RGB buffer to import the RGB only. +WEBP_EXTERN(int) WebPPictureImportRGBX( + WebPPicture* picture, const uint8_t* rgbx, int rgbx_stride); + +// Variants of the above, but taking BGR(A|X) input. +WEBP_EXTERN(int) WebPPictureImportBGR( + WebPPicture* picture, const uint8_t* bgr, int bgr_stride); +WEBP_EXTERN(int) WebPPictureImportBGRA( + WebPPicture* picture, const uint8_t* bgra, int bgra_stride); +WEBP_EXTERN(int) WebPPictureImportBGRX( + WebPPicture* picture, const uint8_t* bgrx, int bgrx_stride); + +// Converts picture->argb data to the YUVA format specified by 'colorspace'. +// Upon return, picture->use_argb is set to false. The presence of real +// non-opaque transparent values is detected, and 'colorspace' will be +// adjusted accordingly. Note that this method is lossy. +// Returns false in case of error. +WEBP_EXTERN(int) WebPPictureARGBToYUVA(WebPPicture* picture, + WebPEncCSP colorspace); + +// Converts picture->yuv to picture->argb and sets picture->use_argb to true. +// The input format must be YUV_420 or YUV_420A. +// Note that the use of this method is discouraged if one has access to the +// raw ARGB samples, since using YUV420 is comparatively lossy. Also, the +// conversion from YUV420 to ARGB incurs a small loss too. +// Returns false in case of error. +WEBP_EXTERN(int) WebPPictureYUVAToARGB(WebPPicture* picture); + +// Helper function: given a width x height plane of YUV(A) samples +// (with stride 'stride'), clean-up the YUV samples under fully transparent +// area, to help compressibility (no guarantee, though). +WEBP_EXTERN(void) WebPCleanupTransparentArea(WebPPicture* picture); + +// Scan the picture 'picture' for the presence of non fully opaque alpha values. +// Returns true in such case. Otherwise returns false (indicating that the +// alpha plane can be ignored altogether e.g.). +WEBP_EXTERN(int) WebPPictureHasTransparency(const WebPPicture* picture); + +// Remove the transparency information (if present) by blending the color with +// the background color 'background_rgb' (specified as 24bit RGB triplet). +// After this call, all alpha values are reset to 0xff. +WEBP_EXTERN(void) WebPBlendAlpha(WebPPicture* pic, uint32_t background_rgb); + +//------------------------------------------------------------------------------ +// Main call + +// Main encoding call, after config and picture have been initialized. +// 'picture' must be less than 16384x16384 in dimension (cf WEBP_MAX_DIMENSION), +// and the 'config' object must be a valid one. +// Returns false in case of error, true otherwise. +// In case of error, picture->error_code is updated accordingly. +// 'picture' can hold the source samples in both YUV(A) or ARGB input, depending +// on the value of 'picture->use_argb'. It is highly recommended to use +// the former for lossy encoding, and the latter for lossless encoding +// (when config.lossless is true). Automatic conversion from one format to +// another is provided but they both incur some loss. +WEBP_EXTERN(int) WebPEncode(const WebPConfig* config, WebPPicture* picture); + +//------------------------------------------------------------------------------ + +#if defined(__cplusplus) || defined(c_plusplus) +} // extern "C" +#endif + +#endif /* WEBP_WEBP_ENCODE_H_ */ diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/types.h b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/types.h new file mode 100644 index 000000000..3e27190be --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Headers/webp/types.h @@ -0,0 +1,45 @@ +// Copyright 2010 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// Common types +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_TYPES_H_ +#define WEBP_WEBP_TYPES_H_ + +#include // for size_t + +#ifndef _MSC_VER +#include +#ifdef __STRICT_ANSI__ +#define WEBP_INLINE +#else /* __STRICT_ANSI__ */ +#define WEBP_INLINE inline +#endif +#else +typedef signed char int8_t; +typedef unsigned char uint8_t; +typedef signed short int16_t; +typedef unsigned short uint16_t; +typedef signed int int32_t; +typedef unsigned int uint32_t; +typedef unsigned long long int uint64_t; +typedef long long int int64_t; +#define WEBP_INLINE __forceinline +#endif /* _MSC_VER */ + +#ifndef WEBP_EXTERN +// This explicitly marks library functions and allows for changing the +// signature for e.g., Windows DLL builds. +#define WEBP_EXTERN(type) extern type +#endif /* WEBP_EXTERN */ + +// Macro to check ABI compatibility (same major revision number) +#define WEBP_ABI_IS_INCOMPATIBLE(a, b) (((a) >> 8) != ((b) >> 8)) + +#endif /* WEBP_WEBP_TYPES_H_ */ diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Resources/English.lproj/InfoPlist.strings b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Resources/English.lproj/InfoPlist.strings new file mode 100644 index 0000000000000000000000000000000000000000..680c8e552128626bbd177f4cd7acb55afdf00561 GIT binary patch literal 492 zcma)&OACTf6ohBpuMn3JJ(tm@pa(>Yg!aCAP^qXD_2aAWDkOwK$o1$sb7$tv^QDfO zvb0nzU#?C%=%G*ny(=|UMkiK8wWwR(3;wozx0Mw5OgY^n=zD=`!r9=NXsWR;paXEB zR`8#xmPQ=Axa;Xg$Aih%u;z}VJxVDG8*r5yhfa#KNV^YT7e_tL;0Mh(Ql-#Bb%L{mosEwjK1~XJFg=c$&zQ$d%zK>T>L!0`z5$gMQPuze literal 0 HcmV?d00001 diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Resources/Info.plist b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Resources/Info.plist new file mode 100644 index 000000000..0f80968d0 --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/Resources/Info.plist @@ -0,0 +1,24 @@ + + + + + CFBundleDevelopmentRegion + English + CFBundleExecutable + webp + CFBundleGetInfoString + libwebp 0.1.3 + CFBundleInfoDictionaryVersion + 6.0 + CFBundleName + webp + CFBundlePackageType + FMWK + CFBundleShortVersionString + 0.1.3 + CFBundleSignature + ???? + CFBundleVersion + 0.1.3 + + diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/webp b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/A/webp new file mode 100755 index 0000000000000000000000000000000000000000..56b1e59cc3d6858016c8e6fc0b2af08aa17a556c GIT binary patch literal 730072 zcmeFae|%KMxj()qyTAggXVI-jjS>}GB2+$rpDz9F7e9KLYAKCjY|e_%-tBN&QUya}QH6 zXe@w%$_p0Vbx-A8OZa_gKRQwOTvVnfIY83?k}&9f!GfPW5LmMK=RZw;JQWw8uXj48 zpNH|_IT*&^G+^BK^9KeHaw?3%dZ%O2jSdGr36Ed(Z@~iN=Svs={LTf7f4=ZO6gU;e zvk9l86#4Z0x_<-nSzI)?XmBaaLLt553HQ%ndZ63|3x1AyP}5NvSc3O2*PqCf;2MGh znggJQ|1DT>&yW8ZjES1daSuw;b1?3xFAEh2nu}BLIJ6&IP&a^n(DUo@c;}A;KTZO~ zN{;PfxAULYhx}^|~D4D>a_a!EK+0I)(T@6aRC52K927 zqi{*(j{}P?UwYRam6t7C^5c8&T6*7-yDy)2*OCVo1Mim?@fVc5$l(Z1!js?=uEyg@ z{Yd@09q)xe-j*|5j;^znbCKFw{au&ijnU}yD=x=uco>m%%uZH%aFoMA|L3Da+wkH1 z6tJ&&PJYSdsQrq3qBUygU~ExgZb`vA&&Tucyy5c8?jMIdkTn<-8gP$d9yb}URF>!1 z`Fo@^$K}QYOD?}>@g4O4%?~{gxa;1_re1dELwIvIzKs$DW7(xHhZjpMC;3ie`sUv^ z82APQ-(cVy419xu|G#0NT>Sm!TjrU)6Kxv#ZPM=*k3%GM`qzf;qNo6Jq|teeU)c6-cGun9=e6z!?)r^2Iu3i@b^f6-@;InUbm2o z_Hz1%NQd_7b<0$B8N8Fr+Ei{4^33X<41ERZH+q96c7@xU;;!&pO`m3%-A=P#(;xXe zwbpRL{KzS)yUhf0+L04He!c$4Ye*!@dW!Uh1U`qFjPFQ)ufEmam*?-%f3Zt%`0J8< zQ9RBqW{z{oGFy1Y*^^+;#J?^5HuAmF--Cw-pWUd4qzfYuu5otFdW>gx=$$~RT>0W> zPKR_ghMEHB%5q!G9p{ndeR#N~(JKPuT*5al(P~zAYsPsB2w?RoST?~re1}uP8Vig@ zgM>W{7U=CmPdz}rvzAa2&&X{u_e{KP!H+6-TPsHjR6^IRmCuDa<+2(MQ)=?KC<*FZbU-P_Q*o7XdZb$4=<() zhF3o53mwtd{D|JFy>fYGD50+@BM2Xy)DGvDyY)w}r?>8tT0ha_6?hTHgwe-vvmAl3 zvdk-|XN$5vYWqxrLmA`fZ5X|kqo_~Jc8OAVXm8Ewq5U_2VEs7BHzWB-Z2 zC}dU|Q%R?S9gEK-F<_x^}C*SI`pl(gum-(OuQLMj5SY=66Kx3Z!h)c9zlnM z(IY++ed2I@x;00Od_2}F9;3DOqkU_M7WrhX6}UocJ9+dIv%1$K+Ob9gqjUG7+oDCh z7C#F_aP)nBYjvOY7HUL}kJY!fX~%`XLss`_i81epW6m=B%!*DeGNxV32d$||CHk?? z1ujAIqZ;Wg=BB}v`9#rdQRGEqqnCVNmUmIkoNOZ7Ig_j`ulRva+&@lM^oSo!wtQ!5 zyTqJKasPPngDKQK!|klLwSG~QCCfSpd!+>u9W9+0*JW83XZUCpm1ZI>OWj}>kz->q z7Kvn+EOY@Y=CRY3jL6*^yN}R$Y_z`OOu}ZFPu`y`j80iJ4j2$eX~d#WR`eeIP+^!^$h`(Vu9_Zq0jBeFal)53TvtHZ|XtY$Z#)Ns8IAnDf zW>A)O>s#0FAcD+0Ftp#QmmvN1O?pF-m;>Sh!$g-1q>oD)?$D7yrdi{07^7v$Y+{h1pwkg8;acV%*KHNM^|6K2-$q9wk+|6J zxt5GSJ@gEE!2{6i{sqY>8P9moAH2XtMGv=n_|$_8L1bpB2bqz08>b%G>Oou&nPeX0 zLDnW7lhmU?J*KEfv3eA$$4vDoRS)hwFT{%7xlI+j2l!`JQr=d$&6hf$x)NQ zOLH=(dy&TcW=gY+#b&$rAA`zGifuukc3Wk_(cB70jD#~w20?&Qso-CF{ z^3UARpShtwb3=cohLYc7CIDMcZdw6}Gapju$q#Ee<+7e!MR{2)g+_v|?0ajR4iG~f zH9+&r`bYue2lAyAb1TC(br~yv-L05&QEpr7N;%PEO&>4Hy3IxpM(U`kfTXobT~?tl zcfX=9IoT^Fk1=;;*B;MC4dYWP5iUT|T04>c){mpV!O8fWn^?G3W?dt)u9I1LB5R5n z&8|&kql-o?)&TIiO~8~sHi)Dn)!*h~?K`z*Q#KQ$aY(c@2d4p4ZFBGz_4uiJELD$3 z)MKN1{7yYyP>-m3yrmu=smD?E7y;Q;+Z;SwJ-(wJSJMONF&k+r95vs<*qVb^s~X?o zN8t!6Aj5xPxh!|f=emGTtyviRoGUsBwf;SFMF$e{v0i$GBJ*101D6Hl87)|w z=1$c@o-AuQta~;5Kiv&v9M;E7_u@|xl%74v9FBDDc(g2yeW}+ec#Yo~+H2g73e835 zEsqwRy&V6dMQ5sqt{$V+V+1{#YcEHw<u%#jrxZV=L|KQ}9iN=0XW~q2$D^r$ zE|!tD*@vYj{hbM~+3Yg?ec3mdC%k&yMQ8&>^@i1%-$G$|maOizmR&Pm6pVwoPWV=Z z-+mEA9PJ;_bOtA)jQ*R>2cBk_5Sj(NoKOJM+mSdU{%ZjN6(mql1ujLMrI?D*Bz#0Z3(ZCv0kHbN@Hh7z>2I~_83|z?JA`~A zjh*;&_-$r)?cG4W6sn(Z%hP3fuQhYb_y^8XDmNj4^i}F`;_NsSXm@Bu5=*R;D=c*l z!IJSC#!&E*{|BS$Nsa0{^ixi*O&m~qKc0T~k>I5OsRxQ0NusdkO{?HY?PZ+(Em__J zz1{_`jFHRWLV$>$c}nITge@2jNnm{d7W^`>z5sxct?(saLo(CAWcW_Z`t-ao&06)f zpi8W(An9~?hP~VX7UY=eZv3HD85|FuAj_~8)$0^`^K(Kj%cR4E7(o!NNOpUIi{)+NV zavO`y9rRIDw~Ej7t$&s4CQ*+X>b#F`z>@ZFj(q466+yX<5Fj=zgZ?4cQP;$VN~GIt z;a{(BJsdgc6h@t_WyFQ5s8lWEE)+mo^hdg(3a^#5w8tU*tIZuGFR`jhFiE0ChRN)O zkjo2KBB8IjoaZhq!$*6Fuk4fI1Se3^`FG0MBf}>+r%8t2;l#@_{2?bAW%z6^vt5SA za-v>_&*Q`&WcXrEJS)TRap7lV@FPn2w?O`ZO6nOSVO9{Zw#$3<2G2SfWQ4&$hML~5 zy#*q{3_!W8yPwF=-=#McuZ4!vZMjNG1wIZ)&b5rN@*cC15DG3&XKUC0%TO%WK>I-Rg+PwDKW;ZZgteaBsm3) zEbC!7Ekoewb*}@bUkz(dVodCh^c6$r~wu&L~l42KUZaA-W>7MgU8NX`ZxXt?Yo}`JrnHO3x%ERa;Lce^AG=%em+Z_wzm+PGFEb4Eiacx zr~WtAn|~9WC!2+TlPnA7L`0b_X=R3Jm12#`vO3D_OO&mK4sF&g|ucaRIs5h%%fuX?KJ%;|^Q$4%lM9s-yL#l09&$s$PiOQaFD8mb<~0_Jt%R=yw? zQK9|EYcV)K5%;XQ#9EHkl;j*c62VHOjXGKFmKzn{Zqw%Z#A|KG<*SP29@lCz@mb%x zk>0g=Suh~*cDmMrR-v5ay{B7|lfd|_nc6I_sm;q&#fEVi(LVu(Ook%SiV-t9C&bz!c+~K9vNh2PQ|PHELT*%LX)mV z3EirJF(@wjYWI*BQRWYjzUFB{I{VlvRSMp?jg(T}II`>PNAD-as2IE8DSMag8xISk z+h8)wX_J84??Q!3v|>8PSq-fZoI022qr-kbA3Yr&dyhzUc`+6}wAtuNVyyHJUZ*~J z3l3&mt#W;_-X%7TWueN3=z2=?nb}z4H*r-5tM}P!}XXW`Bm> zuzh$2oOZ@@_%u*9T1yb-Wp1&KDnadB5jYbGedk;)U_NvYR;hE&l=v|5n!ITW z7btWXF3}!$%L=#rQL)yJk+^c-iH|ll94 zdCa9h1#Z2!sQpCVyVV)uv(P)+w3>|Y+vsk1b#oqSG}kp>LufT?(9m6>{SRH5yFZ>A z+Rx?MfZg!wUDtBCUDr`LXdo^5ZxD|g%T#74>f_H>lxH^-MLWmj30E-a3Amh`b!EO}5^f;paUV6kQ(^?9y z06h~cBJeI!;$8I7F3#f#t((D03&^P(xx}DpRT4pnvQBI6$P8Fa;*H3`VV1{20p!|> z@v!>PQ!kc8Z_T>IE^m; z+rxjm@mFge^JZ=H0<1i|zzrR$WNq6mYh5&9vK^o}*(?`Aebo*8Rf zA*NkCM^=+GTE%nBvW*V$9Pw5891$7$G#j>GO;g5>-d1aKULneh$BE0geFB}|%6eCp z@6orGx9VGs4())o{%R^=O&$YDBwiriu5YdA(Au@v#Z$z$qmQK4L9M@=ipuh)(dGLv zw*B$pFl8+tbV=|a+DDP)E!r-)C7edLb|~*PeFeGOU|W+hCd*&8iZf2qydAt-Ns?d^ z`AJ*NegpZ$D6s;LBv*jw9J~N-xQb>nP$vDJq`MJwn6wyX`{X+6y_lUT*Reh@J1c2` z%+6Lujwl@$Eo9xmUi^Z?!A7*&`kATZ4O$LgMpB66P595$2Pn-}@B+%?h3Gy6BC^M# zql5S<`*+P=vP_e_0-BF8Lct$xHZjZi-7LU}%96<#z%Y{0t)k!D<0VgT${&|SE4>&? zAnF>&^!xtLh|TDATL_Inax@Ag)07mFR?MkZD#)qsbgC)9OGGhTG zd-TW9x*j3nK~_bQBBk-A-=UnoMEOKF|Z+MgxDR2O!c!al_@_wJVB2Ib3qnKor-H#Mwfu~Lh{-j+Bd}1m9<3?vfN!C&@PS zx)t<-cB)l751M(Sm)!rA?GU_FJDG#p$)YrAfvLV^59-S}mCmLz<5hYbr6;QNM5G7$ z7(`z{qILA3{-*XHCYe(l#spcGDa(Dd7g+5PjcaM%>(|rYwVUW~cs2f}R|ipO+Taf+ z;jwGCl7>K<)IH3L3Wt zD{NEFE?7O5e-p9Yf7CMftQ5`W$q`1uP6}w0W$UGet$t&y+{RNVc+w7uvbE;1k@_QZ z0f-Bd)>=o*FLpLo9jamZ0`;|TuDE!Wj>Q%OO{fv|zYe=W%z#e}_R*8wi=p{Milg~_ko)RQsI!6fasv-;&epp|yC*G@lrl z<~Vw5pM?!Xg0+ne!J#%V6{>JlBZ8DeS}+fD3r}JNM#!_oT+OPF5|#s4VD-Gf zF#T5W1@)3w zXGHqpAAzvk2hS2*Afg1)phJ{oVV6jhWW&cNoD_6Yv6h}avSKwoZCMefXRoZNqi3HO zAy=}_${Sl&#mn+Mk=1DVnzgvX^OZFDM;WS(DJ<9&!;)9=lTU*6APy zdVlEsL?VeT<9zAFKqu6a&=QQLe8!mm$QQ&lR?_qq3V!6TBvGxeK9|-HdkvYk0npt| zq@>sFMFa72xrQcU`h}6Zk7Xu3jagF^B*>c6sRw6IOu?4SbF8^}E>XS~54R{^jfY2+ zhw<==@;Yl-o-b}jxeLHG`b4Y?eWFMHO5#(?RuAou{TcTsM6ymzqaK<;D*UGgd5GI64fJHub=DqgdSt$-{<_*(B&mY4wtVdU@AahBztY}Rf<2pM*Q(V02YcV)@pDQ;9*S<@JIjpDA|uBt9R4Lr~}N*U`8=$S_|-x!$#v! zK4J{>-^L_Hp_nHE-$|0_SFiyD=%i#({BBNyS1D#iNP$o&qk$6lq!BCWlE+%Y(u#m|VAkZ>k2QH|C?Zqr}~Vv?0FB<67nE5BucmH!OQ z+uyGMLrIo@_@9?2N49<5pz@FX^YZsl`S|<+_?!QE`FpASOH@9|5ZkHz*E7U@R9+5( z|5c)kY*x?*vnozq&aBQJ*8V53^v|Qv@%i(7K2w1no&f^Eo z{^1DKGO()-ACZV-tJf=kNs767JR^Y6KjYQtO4ie9l77kh*iP0?-?E;hXWq&#{9XDl zVzl6tSV_d7y_R!a9I}6bMI;WTqFw&+Ijq$1h6NZ0+vjUk%4LOXD5ZA0chcCF|A@v` ze5yZK#oxkS=`pJjA32<2YtsW%(Vz4I_6fQG3s1sVn;z-kc%%^;X~c2`<9{L7gP@_o zzXr3?Z6bircrK1jCAf4cAOFFx$08g{4&kxz4lv~-ST#s|jQACY0COZS{DKJJIGft# zWiRUqKbGrsFxfZ^5w~2!=xg9?-{}Y-NyY;QhLdbUd?k9IhklG&2nIchP)q7T>_Xy| z0NO~1mE~S+ujH>Kr0Xj~G$}^k1O(F>cFvpFkgo7*C+Mythk3wJyE~zCf)udY4;@ek zk|9L|*FFpWD2(fIsAjN?;5JOL;^{vG<*d5}T-PiVWaU3e~L&+JplT ziU)RSCy9||s9MfV)NjFm^SQ46$iH*H-SU^zf|IFg0>Wty*>@aL1jCaV+XMB&3O|2a zieUbvQqU%zq?FPom|$l8fV$jch2Qv!!Y>XKW~1yvDqPlMZFAiYD6}lMF=WzH#Nh!_ z{54_e^IMaUFQURsw*%ea!m1lDQQ;^GEB^w8i+kA}jqM9J813Eik=rp?ApAV@RYgUk zh!?kx!zv^%v3(X8Wo=>-q)5PTzRCn>WXVT(67cy~)R9Ms8mX{_x7uhgy+JX2=PgKM z_C>`4_>go~lWT6@Q(9Cb+(K@{~^4nx-OrjtR zW1=uRLPv}dJ4YiwezsXX3Cv(U(o}Xeo;(70=a6*Reryk7K9-7l!XtLoMYx|6ZV~eA{~Uffyucc%`xv8PB=^xc z$=wV8r7*ha+Z+6riJJ7*#BbvOkKUf6H-+TiQL;LV>Tl*UZv7rfMJ8J38dIKN6!0tvuoQR(;D|~Q5T?zvpvNCv61dPSCmhA(# zoQ)0a1I{_nn)_s_hxUm|z0(n*4p(q#7VShK<_|#?Rleo4nRu_*EpN!qeP^hD5j#&% zH@)C86e>4&9GsQOvmd>rhB`S~#fNBl;3ZLx$aHLgXUhl2X$B;4uem!TzoH8pDmdr> zNS1F2`eGGKTlOrn5vRv7AK3n)01Y4hhxtpfF^JV538uFHu}=)RkYR=1ftaV_Q}u~- z{A?!|U6k~0UQbK_r%Tvm!k;d)e0oG{_xufvw(evPKK}FY#&bdX=Qe)@p^57Kn1RZZEZFkGy9!O zFIC9y9)xV-ZV>pyBROJI2Cr$N7(d#cO@*3qJo?ah<)Qdiah;ey>}ms}M0?$Gj$2L# z`SsE)*z~6(FdN$F=_%ZHiSnNK*`NYKt{d?x)>L2|bKcE{uUnSRm4&xzuQ|)R^L7PB zlZOC?FzSrLAFU1H7IZ3yaQ7R=n5}Qc4pgBRyM3T`Yi@@2DwHQeC7`CsTggYp=Q#2! zfCvvPT)XNVoV!|eUGSqm_j}>%^oDmXe6PrC&L}kws{T2tf8>rR^l7_r=E~S04n=8tJtzJ5SU*Qf+?r8BCj)A(f@2`m zRC76<>!3&&>{M->Nz!b$d}KDB;C3TZA6m5q-bUmlS)1DavFhiPLq%Y7Wu{8Gtoo^x zQs&1z;$dAklB%Qdk>W4Q6jvh80xiAqF^o@KDE*dPQPT^lPNL^Pc>by$LO{RcPy`ikfd|xvoqiO9E7gx?#`_{W@ zsK$ugrq~s*D|xxjhc+-3W+z%51&uqoz@d&}K!bbO1>M0a{lYv(J?!@c{!1+Y^bRf+ zx2(K<6(aB6*K!ked&ME$|K{BXhKurjmhVAP-eUQ#LTKEoimu>?nqGX|S=QpL-e-As z$k}&-VsV@cL2|sPTdAk1jlxE3E)p@-(!dk`*0$=_gukP$x`RxNJQx5(ylA@ABWJ@4 zMuaj690HGt;HcvpgM8}B}(sf1O~D5{%C`6HG~Z2`W8BTGIqA+rdBcxDnp?UyH@ zbwH=i?UA>Fq4uDHf&>9jj;-x=$e08be>|XptM9=h+wxqET&!Cf3Oo`W$mCXja3|~x z(y+5eqRPZm+Y?6-7wN3-wu_VP7Sh_6(3Bx*T#9&!hhYRA`-DoH3=dOKobE#F8{-g?B}p|NGC7az8Kv#jYF z1de#aJb2RbEQ!3I!35eOt2`h83@S~U=g%BOnm4qanAQd%)?&?|b7f^+ZPneD=PJaB z5TUMx%aeSMSi~f@Ugku$@HY}xiy$BO0I}q;1#W>eHP3MA7K5bV<)x|iH{y|rkI<&* z1B$hU)@;qXPc5Rq(; zoRcM|Pb596#)C}=G>Fj>c}_%Y7%ihXJ=(GswC|�?!_lQ2qD{0=9pRQ#4G3`%g;| zZmb!Kcl=140FEQC5_Rci44ynhn=m{4m!nLdb&h**Ad9K=$D zuoAbt$wQ$z54qb;Y6r0Ud_P1X(f#RYlA+r1sTy2`oVyGD_jGed{5=qRY4Ndim|cXD z=-e>Ulk8DACP$FYfK44g3mN>?_>O+QjOH&ZjCsA2a2(Fh$JjdUY7ctq$ZOxP}U+{wb0OFq&cMYhZ3?# z=HSHC3^_7?j$5~gPa!YAwuMTC*rMf-b^FIekkFMuQS&&-r}DnfWa^ROEmU!BFa52W zDGTSK+lZ0q!y_#QF>?u=Nb+|(tKg)-C_QG?B**g6vTzy5at%d6V|nNMTlLlJK{o=2 z`DUu+Lzr!P`5#hKtd9)0V32oM7cf}d7NZ9?hAz$5yAMd^W_phXjpkI6`~_0$ zm6AAw9#iz5_Rq4KRO)rY9SFe+ecqP!lL*obP;IZQ22C7;KSz!tVxQr~_Kc>Lb*FmX zWBNOfy+qn~)Zd4{j(BBS0T0qU)+`OwMf#qz$P1z=0@0AOf>Z^JBmWY(HjmUyNJh=B z@=Oc9-$$J0u_@@qDqlv^$1ZnU*fULUc0CO|JfYKONv~QwL{YpqOx7q_K3y{S$#bNpBb17E8dJ9sfbUy7-<<)pf&{IdFRK)Y z=B)1{PZ3Q7?bxe}X=;b+(`oxuEnmVXt*Bl(+ox}RO~U8ZBP+e^VeUe_B8=1~JYc2n zaqrz5bqo|^ZT5yK%Fd6Q2&FciPP zM(>Xx_q zl99Jqe@QZ62~Mj;@uP!4f=cEz_+aD6%-&y`9k0VRo3PSV@V=)7+Jg|R4 z3!Z@yyN6uB3dv(&l+20hTXzH2MuL@C-VWs{MZBr`PvI+z+gSvUR4H9s&?l?lORFhB zXkhJbVmhhv)JCfRXp*7~_g;i~$l}HzCz|aX)!Kg!aFjv)O|>^)*^^0sRV(?c_^fU4 zw|@ev$z`P+32=_UN`Xs-oSyPwuYkpsH9}N$z?mW5#7QhzLb9U8D#(Z181o$Y6jw`J zhpQ!ou_x3dr()aOmQyj)J#s2oK%a5F(g?GmJ%Ghy*ft*Uqj?XM7f>LC$u`O7aRJ!Wj6^M(8dcS+b%j=XFRy?QLKPE*Y9=>^PCVr2u2jlYlAy zrMxqN-Fx`UsCwB_&xjrjv28y|0D&)Xr(ns7MI8ogL1%oIsRxkQ9xHHRECR-+c z>~=yKL85f7v#cY(^w#Q|;e?hYkR=p84D*nDf)p2J$F9fh;m}L<9$w*$RsPV*AJn>6 zC$mr-;mEV>27D2HaomW~@vLU}>4<3|=7S(-gRS5)4)QX7?KCNi5Qrn2*F{er$v$(> z{G^T-q|6lkrs%JL=$-HCVAB|mN{_tCdYI{F?ln-@;A3G))}?Qqg{9n`^wyQav}!@H zy*1O#T3u(`aX8mNX%wb`01eni2-X0l?W^&V=Mx9!w?fzJO_bTWiTJR!(>N1`Xtuuf zE$19xat;Z9`qrq^kDG>C36Wc_gZ@=*8*iG`Eg8%1$W35(f#kg`fj$>yv5f>EfY4|~ zvZ3mP<^zKO)qjlYvIHX-Tr`WQg<5j@yPUABQ7#YVrsY?6F8dwfW5A=DmJca>VWF^q z0uf}%%84kgZ>@A|Z^)`ep#-C_7sh4ad!ct~<|_hLf7LQ$D+D6Z-g_v)LYo4uJSWLISz`AT;5wkN=bx86hf2PPlIiwY zUsL)K?vHX?RUWkmM`s%lD=-3$fSvHRoC|WwVLyv3_^)u@gS1(!_~b{TUi(KQsXS@p zM9*BlDqWt(Ikfx)E^iMmUz#r8^JVxa+ytLYi8TDobouTtmw%nhcMmRa4^Q==5$T)6B$jaXkI~h4u6H^LGYde=PuQznJ|w zwbAqCB1ssF_y1+J=7=2kn#bKQxvBk`?P7L6Rq9SvGF~!H?bsL2>Mndvpx=q*FRFeY z*I#(KhWj+-{@L;iT;8^=ydqVEf;trA9}Ud zBi%S?)TDKaXoo*g#&mad!!w2*=zA>r;_6=`nbXs-p4{kwQ{%%C0 zpe53}VMAF3BglTO?%_l)E@nx|FB+d~ir(NOyU)H3R0O9#PJz4C9J`28$uW{O#V&F> z9bwmJ)6B$Z9H^?c&FEXV<#HVf4^KSjJ}ag|#Q^P+bpABSSe2 zl6lbQ89*0ozS=$TxPQ4xyF+~s*S6q$iarP1vphQRM~~#AMYMl_G+)dD@%W;$@Z9!2 zh|3H$p(TBNEnQ_|2^E9fjZ9R5-^>+;N*B22#mzKQ;NTjr5jgL~U@{|zGhi@bm)I)4 zN{gTUBJTsC?CI(ghdpT6&-H{?(j6fvDEdITTAyf+9Q2Y2Ws6Brhs31VRzT%RRP)dC z*R3}cxGA$YJ|;cgggOwxd*~yo!#u(iV~n^DfaW^)9aZ0QCGIZk`=Pb^bYch;^6eW< zqX>}WD(lw9kAIEs{H9aix%q-SZgV=8ym=JYjlit7!&!*>>Vd8op1;Fih^Db;X{-~+ z&_X!NT?BtE^OgCSx)qQ*3;>>@*(-&&0 zcLp-*H6TA+OP7qK)|8TTX?fS^fTMa4{{X88LAWIHI3SIVq!g#zTHr5=v!H1RXWT`H zhZXG3$J+HrAen<7B1u&g{!kw9=p@V;baNe?6<%Cbm%P-9u8=wf-z5L5JLq z6UG_ADoryy!K#c)nF3IQYNgjtlHXB`8I*Akwttt>KGIXbgW2@o*r!@@h#*xtpD^rT zl}j@|2v!Zd)WGcyr6UoeuQ$vd5%~a*OueB}iyTC%kRtYv?ADA%@t*n7>1Ja1(mx&9 z?G5}M;RxEhT65%+VRT#!f+^!yr=)rW8TB(ZvB zO8R?Xqmk^!6;Xb#wZ8T?#Ol%xah>)gr4Y7XOOVJ5R7)@*tYSaJ#&nWzk#xXiGVp@U zf}`F>|IW^#nS=2yvuPk_h?8}F6T?_g; z`HCEz^*o8bhMolSpr7asx4>>40QCfcs_{Vg1*n7q^*VS6U1>9UCxOBa5P>SVCg&la zI11E`q9{*CYy$q`b{oB6-Z0p;>AuZO0~E~zAgc%@Fzjk1kVS(*M$Kkt>|HE$)w|(? zdzXOdJ9VIR|NTE3sE77yd7vW(gWCQTpg!QDUxzbe`r-p5X3|5upFl9K1`q8C0`j#( z8y0h7Xp0a0>tI0R(|y5Q4@@Br*bf~UX(f{<@f0pTKnhp7D+g(#kFHilFsJI0ZjQi& zB&Tr2hiEi5iQs+BJW8X(np{avYq&qQ*FXN06ZfRW{R`J7=MszRm>r~6mNRjDCq*3Z z(6kdF?;tPIjMPlxCFfx{_@EM%=nZEfI;a8K&rUZw-G0ytT;OB^NAyB*##tD2+ozxd zS%j4e|C`=`2)OQtZZ)g>9C}?ZH_#_Xl6ZX&FV>t4_)_w3b}gNtzc7-5HqXRme^_ik zVhg67dE8#@ZTj+kui4}kHxQeHqq7p15y~6j((A*HRyZQsVaJ?!@IrCoXgl(pKk$ej zc&3FT?H}bFC$gO5Rq_VM_-F+|>YPxvjBZMzPq@r|j}yDOMUC2bZVni$PxKw_L|==W zp=#p!6s~LD4^36y>iQ+Nm~l3Ep>QoRkLkK~4A@|P;T0zbnB2M8d`&XBi&9LE?#|=( zRuM~?r`iK=n+1&Np>2Q@tD_=cJG(trVEBmGBgBb#Ex`LTu;`z~ffu!`U;+)$A8jTN zSy_YV56(UYGW!Df$Z`9oq|dH0@4A8NiY4-{(sBTN1Ejs=K_p z^;!xUvo(w{i4JU!^FAfGsFOf57uC&2fubZQU2!*|3m5u@|Bbd2*l7F}E|yeA<71Rk zl8EiVT@>tr`zLmCVcz!P!elfyaACFW!-Y2_3$NtDys^lIVUx$(sL6W%!25#y0s9Sc z3Dc}FKCF>6v{alOML^W1fz+meSb|$rwmr9aF||lzxkHTr-Yzc82JpKBV_^gMNY3E% z%d62|N|bI%YgnQzoHEf?TNE<7-K<)KMRf?JVd*yfatjs|aGi_TQXUCJkemw-3^DBVe{eKP2l>x&gT>EXPi@=K6NainH z9&!Xb0o3JRlD(V6fJC1+A3>iV%p_SlAtg(5lSo*{efB*^eZD1)gvq%%OS7?ktK!>a z`F1!S?Ek=l4&;~*;o9ZUDu^hAY=?F+113CCcZB~B>X4ORmAManPKKW)-;{4Myuky9PVyw z`y}>6fh?WeEAk-$3~rA7cj`%*$No7+OFXwue+u!h3glD8l{jR$nOsj`nsoBJ;bP2o z0+)Kbt$KEp81+&AcJLdzM$&Lw4KD#ff-?zxs%w)g&4ar1Z-G3yk0KO}Zt9pY)&eos z_FVRx;rP0Nu0ME^iq@%e{?4fXS%Mz*KSQQX)W3SMS_ihfNKe8IPq>0_JJJ~3t`C8?wY_eVSDUB8&f7SGpi_1F+th$?Vad|htlm~&c zrWnc}O5+gjs-}qKwokFQrLkEU+v$q; zKPZ1asLl)Ai;(eYaQqT@1osa-Yq$A6pu_xis7^ugn z*Pn7-0Cb|#LbKo+hZQ&nj`I>j5O9SHW=$Fn{qap{w*1%zdnOdZ8m*@dnxr$HsRR_ zMn1`0>}L!{Y~Ljmr7*H@aT()RmeVYRT}$Ni%TO34BQam?`&{M_C^0Q`B|X=FsK8IL3+IXk4{*GlkI|LSH}5!uJc;8dfgN}XdCs#9`FhI z7#-UUdp3rPH)`Q!8#BW5H#+I4LcNBw6ayXVo7997hzvj&4UXRNg}HQ4qIM5S3l%uy z-(rOqOifA7+0YS{_=4C*kY|r7hahz z+`xqgiP_6gcwjxJ?AwBrFze>?gp&!Mgg|tn+Y?1Nj04;fw@rDGr}e+C5TV0Tkm z0>f2VT0mQ%m4y`4eF3I8IvhyEgmhcM`>0xpJ9*wU9@QI4aF5(94VtSc?+v%N#=~y~ zKhnb0UBROoxPN&0xZsB)!V4}ztV-|$Equ$jp>#TNxmWV)2Qh7Y@Pup0Iif#GoE*65 zwi;GYBbDyh0uWx^euErdQ3sZ-`ucS8YZ1{f!eyubH$u>?Sxy8Y1gpCsMDoB95soo@ zsjA3*C$Nplif&Y-aE&F1m9)u|<_Xro{WUyTGwf3Q!Ur{$?n+0pP6zZsjCDB1Iszj| zIkGUqh2qAEt4c;R*~7!rCZPx@b>2ug&Qk8Lh2oaWR+Wt8@3~fy9s%y$(f`6bRnmsn`!9-AR`tfGga+t6L+n_IXK$#;~N*Ku{x!?u3Y{%O(s$ z+aJ`@<*5RT2IroGT&h40bp#_10+{$X3GklWBWeG|kS70z5=jp;ZY)fFA|%?6!SX_H z!o|6jB@lAPe-I4hqzV!G?I*snK6sSFzA0TF_W@CT!auanz|By;CZzm91Mo;#*=4H7 z;ksNR1JrW{Ai9S%d8ul$xjqs9Ptg)pmyR)PpCgc-WCv{OB*hcMI7*ZJ0okuZG5WU{ z&z+byIf+s3dK9^0+LUA#EgO3~XB7;_`_r6NNT`1TMTVlj4j<`@i7&ZF2Kd`4gQ?(R zSfA-JatF>zPIU3MV#eLxubaQ~zqWNt_dR%VOC8}3WP$UxY|jW za#B_Y5cn$WszC@m6XyY9Pm`^c?kRCyd$SEPkFcYX?@Sl9RUnK~g#XaBhW=i}#ng;y zB!Y_l9)G}_C}agc$W+!vmniijg3nR&W0=ZTK%*Eot8p38J(-AI@nH+siVFAuF8~KR z2}c|rSf#zB)M0UA!^i2jY1eYMMxjx8yY*?E6e3}t{b2@}fD@NlCCa*tmjQ$BU8e9I zMB~8LySuCt8jjmqJ&GE`in0IxL53smD1N16$wZtX!x?m71y?}np+=aUbm<19#AQH% zC~`-Oh-o`wPm)0jO#x96FT9sX5N9yPA|#bq%nE!Qb=q#7_aW++FjrvI#=b|D(TVyONb<4CxlN_uZ+((dN>)<@lHGM4#4iem zuO&XuCNURgGxAc(Q-vR=!dp{?8S>W`{uLEofx>BpGKidXJay6^OK-~47?GQZ=~N`C3E*zT zl8c6PF%kPzl{Gq|!)aw=&a77#Q=uAn{B7_<&>QzSpf2=zmU`d+D@@jxuU1(GFH?Gi z+aKo7)jDzl2iDX)vhZB{WJ86y5)=2VZl;qaPO0_k@ zWJ1cFSV>zWSmrP)=?azfO)6Aw*<;BaA7jL;c!m9D)l?C|-Sywhu4rSme^4)L{**{u z7!4(iy9RcOR0S7p8SLbpDpY^`od46EqS!%_%Id-q(I0!C7X5WiOSSNL} zVL#E4(jfPNvh3bWqRKi#nYxcJeZHS$bO1<5o#mpEA=o*A2@1p3$_WI2n%kPj`)@x# zp5cg2|V$@2qr_K1>UE&e&O$iSyqG~wpLk0VQtGjQGYjK zCw3zSgbu*Rq#_t_E5BbwGuR{*=qGwQPr1*yPx>O(>`(LCE@)=ou`dcIxj6%2=!@d!V56nCR*8?!P1B=UhC*Ovv z4-YKfORdl~&S%sfV;BoVd--Vgi}a>Xe=T0V_z2Z}m1`bdY^a(?lQoYG)WohC*W9UU zzQOw#1;Z^0B>Xt+!&R&hJ-!V50*KazP-#2t$tcXj>50(0%4>+e>dc# zbVVqpW_a!UUqE+Q+(rnpCWmNzwFf!tBx5Mb9eXQcpMDAFwlY@mTU%#9oisnvlDP5Y zz60!V*Gk*57H7z699-;{6|G@k{!rxXW!${6xQTJo7wJFaTB`RToY$eIMg;=LYPy}6 z_wtT-#ZUyP+HWRn_kT@o_^=Tpdk6q1d*t)R`iqM7pkd+2J3CM%eU84&*MqP&r8ry_(7w^GP>FCiZHc(hoBvnlSP zy2GK@Re;+{}z25V{ll3rvrp^6u`Y0%y@ZSW|S+Sg+fN z0(o#(n`^jaAz=2dDn(#zpS))Ad$0WN$_v`#@L(5g!pcRQY2M)_@5X+DqI`^HyKcRV zw1UL@n9!PnHqn&Pmv3}GaLGdWdU{vQItAWUqTopdFTcEd$=_6wov{BB?VsQ(yA_o@ zHXP5!4x+3JZ-LqydzkGGu=nkg_7{TX^_kuJ4pO;uB9Tw91!y1^G<1Zeh&~JMsqP8> z#z=ogUZ1`?ll$8;0l#I}pONqH)K?GZUPE!qiX6;1`Yr|ono|4I(w8g7m=Ra0@ej&I z?EmBy(9*zG^8N1WVZbvyC^%DGJOZr7UbvS1|6U5_sOUPfTMvvuU^6%o|Mo#%q`Et< zlY~`gM-t`Ucz3?hqMH;6N6|FX=i^L2>9pqnW_v%DVmr2OdJqD4J1$Eux)Xuuc+D$X zq(6EC&>9=TL$O2tdLtjdSW@~wuD<4nXfZwabgULiWAJUrKv;3C=r2rmY0f0($60h- z7e7&mn@bL~e}Z^w{f}=QiDc{klYE1%;m_Smix6t*tVy)R(a8%{fAqJ^MQ{w+L)OC> z0&1Y{f%cE7cJTpO>4K+c25$AMA!4oWH1F!f0i8}+(J2F+_-45}0~hkf70aWxPsIuI zLrwdPz83LkBOb5g0avHIlq-V(;E2Bz(^E*wSA(>{FTZSQGZ&gKU|EtS`V(-02`7wjSKD9>sp~7 z5PBizfW`jyPZ^8-aw=(@6gY%4i4FnpvxcCt`G=`h-(kJ(JILj=uon2^ukX^=LjG*T zV;+33t?r~7bo56j(e^D?F2|vm31`ivbcZ`Nkl zQWEor55VX->8!axy<4+RCfhxz;lhLVgZ3P1x7jMu%>IY;)t`bZn9U+K2E7+;IHwQp zJ->y~-V(@8(mmze~&E%{VUAt2>2I>a?_K~_%QjV^GR0u6 zy+L`(0K*24!@lfvver=ePv?KR@Z*%H3g1equ9hskb~SyN3peaqh760?3f2r1eiA*f zJ5E!O>$xx+ja(Q;CT(CgS@qoH&<_%0GvGh#i58J~AW4-viosP5Q}>5diH!#t@VAWg zw~weRXvYffALvvzb?SO_YG{0+ioXZbmxaY34k!!6{c&NNzNV2ofP)?dF#GWvvXKum zWMw68xRG@Di%zXzBfHGD3LYi19*DBX13ZowPQAMs`}}TezWer}@|)Zjbe@NHiE!H$ z9b@CeID8Un!BddNyL)HB$}{MP)#y%#!c3fPnm!&v7Qd+^j9vi8Z#tpbdBs{A?iZP@ zvGM}Vr5E?LK+(a?KBc9iw0J;^31So}H6mpn3_5?D9C$AeoJQ>;u8-W=1vpAb$NvWp z8AnC%3j+uc-pHmWhI}PLT+plQlS5ucLoQCmZ>GkJZ9$v`Llp>GI_<=6hWkJ!W)$PC zNRGF%I3G)cHj1Gc5r%bZIcStb-%E932 z`5`#t;jP1zVC21^O+p6A3yca%hO?s2uKE{;V;TXkY107A=pYoXzKK^I2GAA%0S&I^ zW?;HcLtI;#=V;r}R{Xy7tcccp^uW;Z;m{@y#g@17;Mg6OS^>E32zaIwX63E63vJFa z+Hgh|!*f=a;`E-VERD?^K(}7^mn2#V0flh+_2Hy879~!Q)7=kAHXNTjr2SLxqvG+$ zNM`^HI%WqMfe86btYySTm-pKL4#&z3JopZc4$?t*bX9Lk<9uM6u#RzH`UJ4t?W|xw zAcn}k85{8NV@TDcSe`Ody|Si2U-MI-65&oy5gJou)4Lp2N-tseCQ>J`B~!3&C}v-R zXiwyP29gHzi;q#mgkko5+a>+k0oJWNl zs4$Mghi^jAuM$!WnZ1N1l&9nl?fBawRruk5UikM^cs>fJ^v4vxE5LZ+(F1WKeAC4- z+Z!-MqIY)cu*PK9Kwnb>;)4+OlW$}=3NAPHC-ZRYgu`BiJnU4fZ4u6?qMY5y98jLa zUPw7u+^P_Gjl;efSuE&>Peb6Rn4*3p!g+&0s04IX{44}iEfuMq+BHo6Ub8yS500Wt zP;ltFEr1A~Mu!H$fH&hjmBdf^(e2K?0F{fAw-d_ zs?zJQ72sIqZY1or+v%MO5#sh-<0AcIiT)@w22$5C0L6Zc_n8Fu5u0lOBRbJnuY8_* zEzXk9QwLxG3r=8*3*se2c?2kaMFvh8bJ6fTm)tNH`Ic`3{wDC7wbp~flK5DanQ_|} z;R^~&W*DDK?i7B-R`o8Qfz{;54U8s!!$JQXE|pqe%^8lV35y1U`pppU9)EhhVL~7OUvv-P{wO;D;z46_C%6f+$r+VJVn(HTY?yAn zH;Ux0M{;#*JC_kWC~M}ZWx^sn&`o7OmHfM<>V%i#6oJ<=9M)_E(9i^!$H#~eVSL$$ z+`X|4@Fknahv}<>NGQX11-X|8!yvk~CjkcRun>7*Vl4X!N2(YFAsA%dIaki#F{R3)sRvyRJ1Qf zDQh+mH~O3-FptIa1m8RkmFsb=CBb!5jn+}<3NeEyU#d+F8+tS}1vLnW@Vu{TrhZ!b_;fksAC8Jc|+N^L3npkrgn#gS$7*lHfN$#ec zyaER<^%sta$t&ar8h73S>p@K~J0SS2FpnWZpQ2bC+96zyGPSQL3~3JCDh5(jO;B~@ z_*fn>m{I{cYQKQ^gHV$QO++Q!IY&+`#(x?GB2<7+(a>c4rGJu(#&%;S)5DF8qI%C0 zGq+Zr13OY_6Ms3EQ_vFE|~y6%Z8fSNW7x4v+fS?z#lQVGK|sf*YD zl~=~;130@9gd)|?uW~sRs4)WYKuYH;c2A-u_ehd>c%EY~5y8L0+*IxGGFi9&2go|$ z$RNQ+n{G{b2RY{}hW_aDV7Y@KDm=y5!U@ep-*H-3KF>gvUPG%$ZlIaBd|vYvUd{Sb zyUkZ-BMXj?Xx$0DxK%KI?VHgU;V~b~?MqPXEAdseH&~4t%XL_GvJB9RcM;Z5#CA~y zI`!I#P5?#39pG=b3Nbm-%gv3yL7x3XG;4V>EnjXv zV?uwFj2JWF}U8x#}hUD4A)F}YWI?-_EI$|V}s~fO22B0t730bv8h}R z{<>9MGHwD7@)bh2Rq%pR1H{>86gSQGYoBSm#k;XDKphq@3j2fo7@^{b;6us&k$uLJ zm2?a*9EzejepY(9Bx^p4nphAP&nq_}y)&6~$o~rOziUnnl=m z7F8p?ekH)B*(U;SS%AhC5zX>XVc?snyi-0;^+e?&)t;!lC%KSozAK-nr7bFFN{f~@ z>+f*DpzW*i>wMrp-(tkmVB$|vvScPB!SKjg5Miu%l@ushDCQL=wK%KTOFDGP?K47q z8v!<<`*(>F9JaxU+G`jJ9Vy5Bk+G!LQTzkhOOvR8UUw0`4d_2=*~iYOF>!lG|Hw)n zq;-<5G9xd=v7JzpXhw%goDlc{JsSZKEUii4Nj4Xh0!l0c#<&NPyC2aoN?{=`L;3M> zfW(5dt{ho|pp8xwBTx=L}mp zwxHQcBx*n+K@-4jBG@Jx5Gg1mP&3sk$s|sO&gF6uyV9k*rS;d2}fVOt`ee?Nb?m6e4KhJrd=RD^*&pG!wUq^34 zk99{IY`~2PVjiz;kfA!=`h<9Raja7?x|(=2jR zGF{IY4|rnvuGNi|cd~zq!JBF^5>6@%`Sv6@E)3lx23>Uk8?_{a_TjTURHO5YI$TAt%l<}O zQTjVz>7=TV>E4K~c>RG?Up2ii*Q20OUG~lxJkfZkuc5&AVS@4K9DIxh%Pf7D#>O={ zCX{|q#1PaabX|BTfrEvYACpw*dpY~g^MyjXTH007TR=M+XdDUaJ2uH^>`X^e3Zluu zlh>F_1{Tmfj~p%{32;E^7=txw8vBN)SUW<$y%<^5`8w)oOy{k#W?(;# z^eL<^hCP-U&6?jZO^KT&z(VM)PoWzJ&R&@_AUPFpRWWA(IW2oA`bz^*OB{|~##=1q zhc~fTIFv8eBU~d*Osf$E#MtG2z&2nW4Z6AvOIdRdMO31Nz zla-KT_b}03MV4ZKKl9%ZG;*__nqh9{IecY`Bx9Zbn=EMXh~xFP%mU-(#Tz)i*XdIo!V63Q1?>{ z<WPvY^6zcMs(HPeLiNNQPhR=IC$9=JCCCPSw-aYR1Q$c zDy@@FPl73}KB&V^+h~Oo`-UMf2ot@n6ZS1m#}ne!37%!!Uyc*OTriWqA@YduKTYjX4Mg!i} z%^zc9EQ4g{>BB#bG1z>FYC&N<#_q8W`P2{&8=gOfKdr6{YAvjO`$aDGAggmAu=c0e_UrO=OytG@b&W#L=Q}+tnSUL>y;ZkvGFX` zK$dl$Kx@hpFFX66C~GHmMxlTgB7=6X3pnO8Sn+Isp9CFjsM&QliGEPDXH*wNm- z(F2-;^_-ugy?oCRm6Km&3tX~5-V?$p$QRm)YflZ#^wNe=x0L596-RgC(+#v;fFAOI zWp5hh+x`bEMS%7>V=2Im5^2U`mOl_IQQVDEVp#;Ww)|0~`^1)*P<;~)TS~IJ+!XrT zvXrrbp%d~w=he=Gg5S)7y@seaa~$Jkida&hmUf1q5-PUC-v1G)maBx@S`FvgMaX70 zWj9qF!^P}DPK1_}hTypyA7+FPj^98qzi-obn)F`gps1v~S?~Vyq}+>}p?Y`z9SK`l zr@+SnlW9REV#R2Yx!tiP%Abl~`qGaFY(c*VZ2ILkN$<(ml+kZMeAkLhQwR3m70VJu zk-45L7F~?uJUf?bZJFVFaiQ`xa(u6wMo(oq$N0fvI`|0rIFz`a$LUmArJEQy$|-w+ z#t(QCb=^q83x%u@=No?j zP$f$z=i#xR;iP9wR1$HDPyrV%l2Dum4kE*i7w%aCJkq)rWh<;f`!UkFbJ!z^$qLQi z12|)3vnS?p5OXiX$=)_yG!o5!8|U{8)SFZme#iz_bJmCGE?&b_3U%AXE+LQ9a}_Nj>V9F}viGvbfSIX~3xZbm968$*nTolu#R zO;0x-?&!i2L}d$z5&*s5Rf9Z|vE`o2NCe#o=amzZ%;3eFy$F`iAup_j0k zHgttkg%QEdn;m%4H9~fNS=Fs_=Iko3=2ThL zff)fP4ret@7)My85v=fqH=)c-vR47%2iqP{Ny`$~wKGYeLVRH=_5o|+joAa_d{GIV z_*n~LT&sjnLvhr!*E&N7-srjZnd{^;TKh1rwGrD!hcJ3ov+mhx<~94eL)agt!q9VV zQ(gxleFn>*1_r|4uD$mkrrdwO=X9;tH6w50^h)cV>DRUT$@rdY+BI+iK!>K22Z$d7 zq`)aaD!x896BKkRw{KHt`J0MXauYRYS5^%khw3lC%P*53Q@^l>vQ z2VoTz?0g?@|3ni!%IPmhL0`}H+6yTNpnwJll5LoV3QW1UunMVexUIVm-UuAq5gCHB z=8o10=R0xU-~YF&=pec=uAebjoE~cRkGUN1Jw5qaoJEIc<2+ozfz6I099F0G})1mR5b3uL|Ez z4{iHwh24V0!ng#Sh z>NXd=}u~J-0G%C;Y_+`7uV31dlWL0|W(*kpc$} zgl!uXti+u!Uk*`KgZulC7!AJQx$IW$g&Y*dSC+memr$)6RKo^ySlQ@dr-M@6;c{#Z7zROAg=U=#R*E1&`pKfDZkURNfZwNLpqS zF4Tep^b(`^J@c)>r!DFJ*3F+-(*4J07)qh=aQ%S7WAGuWf7fU)T;LX}Sf?ng39kY> z3i9%O(5CY-3Np`R@5cu?=rFEnGXoRZis(7gis(7giqc!2VJolx9`mN>J#%v*o0mye zGRq|UEvBgn=RROB^o*VPg{x#Pk7fQhW`4lVyz0v{|2s4Pm7O{FDw*Gn)%*!FcVQ1g zVBYrSnY)Nm&OXy$WF(7=+Mz)5_iD?mDX@o#R(M9W2$Z4*uWJqz^50N+Y z3U-dJn9p!b89frq-9pT#*3=Wi)B{&t)B+%nMCq|60TW}6I#gZ<9xhX^@N+_lsrgVK z6n}o0uGe96naU47meQfKV84ptgVB??`L_Gp*nCOz@p`l=GX^=5So;^pi+xr3}h zP-?PmYjH*I+AIJi8uy@sp@Xl1ZOTGl3o%iv<7AFQTX_LgB@OL7Aq{1Hc|$+3 z8ydnopFJAi!gl!efxQklF}q+9#AeAmGtowOZ6j$aTNg`5U_nIK&81x`%|{@tPU&jeS)z+RgF`@rNztR@pW$uH)b)tEHkUym#)`r+T9KPI-I z{e0oWrQ#dbsT}-%z#VczkazMBVpM&sBRu{59rSU9t@&$_L9kKzoV6p;jFixp{n)MP zt*o#;9e|ZEHYO{HG+B+5$x0$kmciOISxKbHN+L~G7@3@|%1IVq)5!Qum#@v}v!9wQ zblrRkixf4l98)2uxp@ymvR&g60W<=@#pyF@|GqZzo=sn^?myA2xha>}iQDG+SFq}p zSl!Q)Vw;H4CO=DHGX~~^=?LM}KhAbbAO)*Y3E)_Jkpwbe*ONdx3}X@iVP;BT3=AC- z7!3;*0!{t``~o`Op@kt&V$HxTjqmM=9{7P(D_M3x_%KSq8os}xf0fT(*|#Pfa=Ef^ zpJNv$zHel%xW1{Lpl^ixYEZt3P0BBUGRj}FUl+yy)!_S^tHSr)e(-TB`YP}Z{a=Ic zM-WF>;_o+m`{K{}72#Wq8TNk%e<#0vHTb^X4?f|s81Mc``nJmK_Jv&d73e$ps_;F( zr!W41zOO{zv0nwgOXxk9$mW_1Z)@rCPEtrI$zU<`WhxJ&T`T}QP7el#SWB`xH^rx`}T;9%` zeI;W0)1yf{b%{U)L>8A}GBb4@>OF`uqwb3KKx!T?{*OFgR|=6^Cf~G-koFL@j*%#! zWD1d@ED+zY?c++G_#z9Gc4X$g!ig01uq!;shpqq;bmbk&Lac#9KUI+awNaRE6sH+g zSf#wJk1(n>>USB%4LUqBG#bSj`rz?}%^sJpae=gGE`1WG`dGKQ^g}4@tk+!n9j2*C z`e|yD|IkWdUW110huBB($<>wcfOIkgy+b)hxEz2h?xrK9mHrv!DQ8$dh$-_gDNi}T z^0j|qd5%+-pYWHJAG?i(Io}KLwxQ8_qW?2Qb<_`Qzx>hXP@?edN#(U*L-<|1NpA@! z>di1hK;MT~j0@tgNbF0~VTvhU4}b3O7deu(_p{(-U|nYMI>#C9{Yr-mK5OTH_WV@b zm(_!pOB|_s)vNP+moJ0Yp5A1~c{A$!PL7bBwz*Us;iV!g?LJF}f4Q~^?@`v_FU5BFw=$vKTmSNnfsS#FKL1U&?QZYneZ``)m1m=O6f~{O|DjR1K2Q`)g3}vc zce3U`DV#pNuX+%b&odt8F(G`cPMI^BSz&+jIH^+M67OKTei5rb#5$Al&L016HU8Bx zA=o2aN@U8}-rk=~oP`@%PS-#ebNW8Wz4BG`ET!lt4};6J_wlKMGuWL(_H-*pNwj)` zD1#jzSg3ScnAfHp5~K&x25a>tgB{Gk?mv?YN(7L=)Wm4&w^S<7S28#$nhHmJ%$tNB zDmVC^e+*~DHSp`Wa4;^sAs467ipcnY}X71OQ_|N5f-iZz?Ydmchq0bnwcfGcOt~|7 z3WLWzS5Nr>H_44ETn9JUX39{c&ee-PNYCsEeu7Zt2f3pP*9SWhEcl=dmnQhSb3Om+ zYs|NJ5|ob0U-U2O8w`A;>$^~a|(4umO(#XA=6kt^;RyRDzR!8L{T zm4oqx%-|$X7q8(&ykvZb<1C=NmC&W#g&Wpfo{xpkIAlFLe2o}S;G($mk^d|0y*1fx zFWGJnlhsw)ryjRElRA$lC*b9An zy5oXb@JJ%IHs)_*Ry{u#2Ve@Gk54I!mov7!fY)F)iF&7x(2I}bdrOdL(Y>a7aj-Kn zPHjjV3i=`2J&wq6rT%R-&Tobf&2-9{96P0 zNx1gXEO<_(&I;sD1kAV_69TbS#ndNB;}e*NUj+Y0Zr2#XQG6f9hiO# zsALu_R^59Xcu2x`Fr?3;D(SW_rq2=5hx}%D@uceF$BI5DgecS5TXNu0_AFaq&kf9U zm?d{g7z~wYmJF9LI4Q}2OK`|^4=U)>9iN&7KUAQAP`5xT7CfV(pb&rsaUWK3(B?MM z1}XRa0h;=h{ezM1W&7<031KmfrCr+6OKAs5I!d1;}Sk0;g2N@uLgJ>Qd6*wM~u$SSNet~W=TKhf&OgW6e|4)F{peZaD>iD4k ziIIg9DM#i?Q*D@bNzWtfjQZ=O_#8C%{;GdetX<6zlGC8l-5+|u=zX;LP5Vc3S%(k zAI!?(PAqAVZNT;SGFu1&216tX>jrJ}%ZW^c6k7Ij^8d+&!Z571sTTl@stPTu8~01R z3pjk1f*zYMtSht$4<-WmYdwDmVYobt;QR_o!}r-JP7rU8xjqX`?#{#z!8{T&)hem} zM!ocSCVKJSxa;xpq?uJc9zL#Kq^b3(GnZMD_Ihi#3b5=t+G485?VS&2YNI$?#gcFzNY+C@25%7(_04L)v0JNOEYRcP5(@awy2S#)~kBNo8-d+51DDR*I;15ap z7Y-SDxC)s!?Lw8VV<~jRIRevbf8-whW)!)YE`Z;g;(K}&-*H>`z1DP(AaZ%%t|0e6 z;f5>;2D`lDy@fk9IdB&9ycU}eEqpiSbvXe=AAkI$SdQyAqy+3E^#gGTp%4Dge1rI( z2K>+HgMTuF1(jRBpz!~DSpJi$+z)zwjUz=^Fas-C;d_2+QzI%rqW7BsYxw@85u0r* zPGRw(*Td1V6B>?uOapA>;;h?gB;ZCRFus z5*JrL4l8Z0(;lUy1;mpY?hSSigri4X8VB|okW|>VY`Lnx6#V9VlxTb@4UfQwjXCv4s?6-lm0Z--a{kl(Ta{!N}5xf*I;f*@&9t+GZC>Mnk zjGx)OtZtxGQ3}V$H`nI15P=v7qkv!aCg6ND$>ZuRY}EYU5=%i&{6fsqUu^wfjZgU= zkNnX>{#a)7M?7cX7FER=U&tRH$v%ZvcW*!bXakm_{BbbK9}`C_{ur!SV%hNU7=#p8 zMfsv**>J5MIOxc1viL%ZfiIqbKT}w^^!=lt7Up=tP8Mh2iyv}^Ya)kDNw&oqNpIn@ zShFD8;tU6)G43y&DW4(qw@BGT&fvJFCnXxg4b{7 zaG_s|=KqP%Z}ipa=Zny#7!2ZAgVM|m>pRWv^3fcHOp}w|2YE__f-H>D8)u~k{lBQZ zGTU>9Lne(vml8R@vMcB_-=(2$GfU=bY$mo43AX9JLxDYv2JWp+Ur#daA88gU zt^H76B+V#H6F@zwJo;)>@$+B-lv;lr3UT`GK*=zdZa$?F+SK;PzBirmuz0YMeHF~_m4iDRT@!p4l09dG-T2;}7)m5?p`H`jff&#n63q5TtEH~s6&8tlMbRIp+5 zkbvj3v>DSsuBJ&Q3NTK$cVJ&w=OE>^(Fp3dOs z*RZF#P-OP>$3Bh+xo~>S#b@9C!6JqJ{h9Ow4N-%`9VNkD&{5$>l4|ym`92~#Z+fo77Ncf4$};0Sv3pKl3>_K?9x+Q z!ar=+bJ}MeI*;}D+uYv}bsp-%Ip4;!xE=+k&3K4$Y=f+pjN)_VTf;Ii(f)YY|I^ps zqq*7vw)MAb`5y&t#yxj8O}T$!?%l$w$2suMnfkDiQbdhEbEOlSckM+lN_m}c)r8>| z(g{2LTV8LXeg>bS<=%Y(=ZQS~?ZTMtP^4&i#s;otT{=a|pJZgs~;eJ`@_3ykU6k~_f~P`G{ITvHAEER!mV z2ln8MnjZKzjO}J138&5Uzzhk0Tf*O!@UW9ie@wzYC`fwXaS4AQ;qR$1OgB`XKQjCx!bZ)g zTky+ILaxI+2dpIYLjCg$q>&gSQaw89uuR=YgHaay!+2G!U ztn9L5ppmiiZ7asxij9@sRxI!}#@@4HtN)6zb5?BLEsSlnV%;MdyJW>&f5%vZ6-&K? zu{OJ07Go_|Y~!7b9kgQk*@)HbWlX#T)Bx`I@dftIQhmZSGFK~~kcOWrsdKg2&1bdh zAR{UGc_=r>XDqe+M;%pDxWnDq2nxn zY_7JTk?*pi@8Ewv`mUlB6)!kASMxGZ{>bQPu90!M7VPA^jOe@c_;+wOU9q|jCnoSb zGFLl+7ArdEYL`RW$n`HHSfD_OOay%?)T6ZoI`9q zPnIJq8oz8cei{8av5>`3;bl~O!2;ki0Js38EIyuu09s%CF#-f(K0sL9fym;MOxcf= z7Ca9C=#S6=G&Bo{s%SzS9jQP=3y%SS56A%c2l6U*BMq4Fl0Oz)^nX|h7AT)O2R{#& zF&nvukxBS@G#4ockb+K@KMHD=m!~5ojFjKw{~O_9NScab+V5>c82+~}1J3V#i0~nV$vNL^N8}SkfaUM~0dU+nSKEie`&i39*0*me%=%fP z3031oHD6ToMfKFO@QFV27v`VZ$U2M}dyu%FYQ1b`4YE9^W{Ld<9}ZW!&T19TJGEr@ z4O*tSSXB;V&mTg%`%a=|qu!Ib3$fugk%8PcAlF+8N>w0GA>~ve*|)6&|3RdKg)0g- zB7#6TjDIlSq2HpaG>ygABJ?*1Jh2-2BFKg;-q)Xnh{uc3(-`4L3wU`JFaKz!O+k9j z2*klvZ6I44`5vs&MwWYm4aq1BAcjE26U{0mOh6BTVHuKEA2pqCsEf?WJtYQhBjovpa=samFH14 zn7X}D8yWZo+J=a0(?-I#{R})a3(@=2986v|Pn3o5YGmLJC|JyP2PLpL(-HE^((nS*e^6K{`>@5u-f((+#h*x}S&ei61qr^t51P0*c z8dc&luvT#xakRU*V;~|6QEKrCgdPtOT*NB;JP?hRDa0bbmB3le>%0NQHmYhCpG1Mn z0V{HZrNI(H(g>)Dk}$1{8%Y#QL<7gzl$?~e+I<}8_gV>uLGyNswVK`1tq7$BM(EH%pw@G>kp<9x)c9B4 zR>Z2iO<&aoO9juqXywk~W{$2`y=g; zKKS`MIeXy5h&|Ho50ZglR(C4 zgn=OTt9;4LmyA-PdD6|uHoJ*QQ(3ZL0OOFgW!-!`^Mk-?qC5AvnDU#YibFaBpFg6?W2WiiW7D8TlEdkPo zK6&N43e<(Eq5^S6rGUaTD8@V$Y=g6aSA13?LFSVq2yhnjY{Xk2uY$rw~&x4ST;fQh)1SzxjG`>H882E1oUUh1l^OAuKYZl;apk{&)1~?*> zcvgr9Ow?hn7MQ(ue2wbEA>ML|PeV3j8nHhKv=QS)!Uk8yF&t zS+uenZ+4@&6jfN!My~D!QnbucOkky$q43NsT?-UY-SrZg9D^Yy2`#Mjjfir_KK%r< z*?I&;Y9t){C!nVR{XF976%F5#AoFWVwK#E58~KWSUXuBmg%=F^%U1X@N>TZ^41Qny zG3Jjl(DsDQA%N<#g*2NamqD@$Nmtb`mU)R>YbvZB-o!zR-cxl6d{bbF02}18#V4-C z&mUd*`IJ9LlJL`tP#7JEkpClAEvHG~%WD+CGO=A2C!NU836&F@jF1Sj$^2dcbd<4) z<9J;m{`V1Kj~++YyjDWRYx4v+L1*M+8?RPs#ZlB@hf!)41VQx=Fo>T%p2I=^^g$dnf0;4L2*hwp6Jz&SF{fd_BeA?3<@3ZrGoXf8pp>sJ*u~5r zIgK@(XOO@N3vq@Zv-oC}5^NHmzsDAV)hT>^0I$`2Wyh7ki^ZBzKVpV>rU264y;sOY zrd@o5BogYJCyBV|SiGMk0(Z-x4?!ynZBWFH<6a7oP!}+&7#cB=6=e|m72=5&uSnF8 zHMS+f39W3EnjR>)Wk+kqaaEOJO~p7)G%1atuJZ`|4YFdqkb-S{@qYwijK2zM<+2+i!6`8PxR{5t)CB z1=Wjan+qx=QS!=o6pf^Uh7RcEKo3JSHH1FWMtU}CGd!5JIFtlFYoxD66bKG+9UOs7 zv;W&6qq(k{hdNFKejz=rSowx}ehTT1#fUAJ)zs6?<&>2X{iIFAD<01wf<)?Lz}m~1 z3a&`i;wiQ~fdN5{T^AU_ipa_hqnx!#EnJ;lh8DK?=s-*kAgz!!g4a^rJ_x+0+gye? z5JMfvblDPFGS^)eSLrCu)!F0VuEUW1?Lclt&HK`~2oTH}GES1p@+h{j0yGgW%p>R| z+EiC2sHWJm3|mAYydtmcR`^1laVxEJE<|Z5TD%vbFsLg831QBnbOvEC5KzOnD2Oav zAS`qaK|+AmDua6na(ravV5GttSwh>8Wg>{y$MF}fFl%aUBjr{6x~%X1Ky4%^Zhe*o z>4Tlur&TIB_+&T5B3ka)q5-37#q#WDzX}VteHq#+mxxgw< zS%Du$z?@}Zx(dvj^HIaBHiW@=v$5|E43ww95d~YwNJZLFCgkI1^f<(zE0;lVmE!|3 zse3fDfR^Q>1Na$(2&Vt&LJ4JOarF!_G8?75#T%i9gL%{tVN3}%1eD<9J8Nd6p)R^m z0&q4{%Rp1BB{iKcgeKT!7a5x>E6!cvqVL0xr6Ki*jJ8=n53! zHl)#RR1vGxnh(UX#X%j$KehAd+DOcO82042*dk4dQ4pV?sm0VGj7$*zAT(^OjaHHU zAt-*O;kqRZTv;21EuoHirq8;9^Cv}TC7u=56ct{h`eIL6VQVE#v!AR(!fO;l#A+$2 zmX05OO>xm7$O*5#2Cz(6VQVda=pdlnr1Yahhpjmb;;HXk19q!Km)bE&DjV1r%sFaZ zgxmrPSCXchv~8?8f2}DC^6(UKF>0kBN++v zKs7PDMwdnyth2!A)%P>IX!)?ZM1z!WRw`xLd?>ZmMU-V+3rWL8Oh=3_?ui8lWqnOEpcdRj{zhVGGMhKAQRa^8>E3+(kx%w8*&+9_t1jtO7i zcT*M6I~6NIqK}~CSJ?)1)|9752%;u-4!~qSMIX2WNUvR=JiudzR!bU{3>o_ z&0||Ah4NsRsi}~lpMn-KuZnF{u@_Zrt&06Z#a1(h^Cj4}ao&L+H&__^NtgzJYp=Cy zM4P6iPOmlm>?(4mB?0*m$ZZfkN+=tCcAk~+mAx*LTi(>PBC}x|%;gm+528@;mzo4Q3^VachyLha0fDBu59Z;+9t&XZP0KkidQ2MC8@KvVFvbE z%Vf^R?1r)vQmK_mk;;$QWsy+Do?yQAdJcOAh!L&Rz2;O`E7Bl120f%#VR!) zv9Z(0SjjZYY81A#>+tJ@8kJbu&>=v22&%2@q=aA3mzRg2v&d#j*fJCy!o(Ez&r>hk zko$EtB~lltgr?XI*;rwca{xEEUMzOqcz2OFc~;5^K7?FcU54`3q6p^a!`NAR0vk_H zUsTXqa~MP^{uRlGbnxPSgBf$GOEg+l4)zm&f$`yk-n(90W5bEyG=RmB6Jr=>ddj zbTB6kMTl;q%t_l3B88s9ecF?f5t$>AAu3WPk?T~XL?Uh#nJJNLRisEFgH>cYBBpa2 zztd5-Dm)b&$Tv@YI)LAtVE@Nla+lL|PvHqGZF6xdL_)bgEPm-dUN8)5fra&=VUTaLfmjRe z^3KA0iM)eMDLW8Fyu7zCA1!O4Ufx-_Um#_n-GyY0c8*MbwJQ zONJ5_5U9L}iVH^;!b_wkNU$>OJ(L&SfHxL36nucqB8R|}S=_9MB3x74jB8fu+? z7)0Sp33WY*y1Z3*xd2MLw<>^C#uiEp0gA*5Ci9enZTg=ra}Pjdg^)E1xwJy1vO}_F zoPaA^R6vP%qT7(i;kLqIOIQ`VGGw`Yj&c+FYND@e1|Z&!qzV4 zAu=16q+v^yI5S<)=_qa)@ z-{b%YdBP!L?YUJPL+0b0gv8p^ZxRB++5u*T7-`Wq7*-v{uoJ*23Nq?nT+48YE$foV zDhfIUS)7ebP9PjjLVF*&fD!hC%&BH#z*dHi(BwJ`!@7FTutcbvSXEf8js&PRlAuOK zG=Z6i;@x~mPBjdw3nZ^>rxe`4Vk$U17EDHP-epo@BLWy2G%3w$GS;ZUTRll?fNH!( zjr6z#B^u%qlpIkB^A8)ArczxZRkWiDC9&fYl%$DE;0%d=pa@)^_%6CN|3RGBtZn4% zD_XYoeN}CQUMcPKP|5ff0`_+2GEB;Nx|d-v1EDbS;$t^m&W%{sb?y()GJgYdfX$Q= z$gV;O{>87=ga#aJ(PltP&Xm;4aD>InN{(4l55lFcFr~BajD7B_aVM)@zB6HVo}HOc)Eu>=;m1sT)+O zEcO7RUiMSlK1D!oZbu@m#a^z(lw!_VK^3*yyBB#N@+eZg)`D9O+Q=?AN4xBtvjW+3 zz?k(~vVmG2?MiBz0^5pFNZE`IAshK#HXsnG@T^4yfv91~s-(T<4d5BP&!bfbKY$)W zRRbK~*DQpl#4LoT9FhpHQPZ28)`*&K&<`UBzht3SI4^InjQ}^95m0lg1(Gun0(*r-`1B zWufPy=5Pyk5+K85Cjm4Rl*oFSGq}>DQDemVZ|BOQ=6yj9P4rZg<3!k1^yt;QRc2)T z(;|$-i9omjRO>j8zHgLVOb+Wg4+qjXUgfqTk(Gy~Zpzd@OLApy2VbHvN7mB^teP0H zHcHjotQYYXW_oFd5&H~R2vUdp1MqGt!xc60d>Ho#B(L*^+D4A}xb4Ka^YJ_%>5l2= zay>!3{e2QtV;bOJ0Z|JEP(cGZ$|p^ADieIsJxn6CLBaBZAx<&Ezlw0t&3pqKlozc) zsQghzLH#eY!xtsPj=+}Yq%!wW7S3nk1>+cpIw-dIIWA;-mC2F~yjQ*;z-)_{3ku^G z+v5Sevd6Cl0y%RidprUaT*E0dJ9QAH+EG`>rAKPv&m)5^TBfzEy~12i;UP;SRf!r^ zF_lt{LD`TJm6D4nu{5(>xqG@f?<19iqHr8KrUh*{aBIEdAp zR3t)MD$fCAnVj6pnT>(6OQ;gB=A(vLlprYkB+80tSs-nz$xj5&LK)~NCRT83T2xkf zm&lyiug_FZRtx1sR6$hDZDQ|hN~>Cc8CFiyqFJwHqn7Pj^omC@Xd2;CSd0@~U<>+* zT~5d9lo$eD>tKl5cHtYUpQX%?0QYXi8WFKo`u6`g4Z>ptiwPdvrXp*}=nd-sisMOP z>rhJAI>vYC0vfOn6IoUcrbUev=kdN6C=QG51(pkLZcuj(zeWy30=9`o+;UCynfhP! z8Gvd-&PssXjuGK44p=hxL*%gj7k$WFz>es`oT|fMBc4`@ZVFlC5M|42MTjw54AYcR zip^X(fKWc9i!xZ8qWSknQv^)pWM9YJ8 zZ(pT2C8|nd2I{Lyw#7jws-!h%iE0=zMo3#^q{YXt#gC|~{d8NPC_=NGnvwug8M4!4 zHY)_hYF;9Q>hB?8su#Fo!F&~z!BxE=6)}E7P(3HWbQ-iVqF~TgF*5}RIF~UY*?#?s znPV_v91`YP+bv$AdLEU8Eod9quD+ky+t~J`A+g}pSny^9ErT`_Y0zfFa2z8s28YLj z_axRfQs}EG;Tv)Lv2pjch@A!|Lg!#8Y3dyO?TV~iiE$Ai2L@ls_)k*N`vh=wx)J}t zVyGGA&>T&dr=JMv`{dv}L{&u>N^wPxL4BH^S9rOM;RhEX26zI@{->tUzB)@PmnB&n zvWGuWYqo>f6Dv%HU;?9k;ec$X{HvKHHSp~8pRwIeCdv!J&ILnvWNncY<(6QatzV37 zCz6o%-!1?IphB2{&`XrM)hD;o#NkuEe=D&LAB*t|M}vEKzb3cd?Q_R1X36dzwRaso zb&QYoaqzeY$5!;Jz3Tl=nyi*I_n=_Gt{yW@oh&Zdfuie>mcoevL!C#|d8oJ)lu(Hn zVQdQAw`4m@r`>~`=11LH@fvB@EbosTylN7*5F#|ub5v~RBh0pb`bEf4!NyRx} zlmRLmvmx9`gN2~ADEiFMP5wc^TeTV-1-1)gm>g_CZ6NwWZnTSGnrm##iZmlonQmWw zE7}0*WQpJQMQ2V?uber>Q`AkU`>aig1tB)xgdiIt;BWiC{TOhU!Owa8k88D+#l44|CBxP?Qvz1*oeh?P8($4Ipb@=pHK> zz^Q$qPYkkY_2`@N;`b0xZ^t6$Byx2%kEY`l%)csT-{;duU-d-_?8U2ClCvHVr#{Ot zQsBKTO?T|U=cK_SiI^3W!GgeQ9|?g2%40v2FaAla#9x8uMh33u1D}c@c&iF-MDTVM zTx*YK2sNIpr1kuC3nFPyvqd#Ih9|i6bO@{lI)pI*4z|Ok0}H^>K?KhXz(Tg>dXt}p zaYH1GUbfRjvv|J)C1gbg61E}0UFk|DfOA9O;M0_($Qc4QxfHSg+aWQ<9#gsz0l*PA zyD4J~CDk660xH6qXvQbxa*~#1<5o)jCPXwOUtgfJ-jv~v?GI|Q61DFDSN47Q5BfrX z2jW42E_!``8xR3?r4Snk^`^L7khW^@%KS!6o<(BPZo9$=|J|~m*SRUU}_It}3 z6+CGF>aWG04tF;uTrvh-rFitcgEx-#ZJgE1d-xx7<33td$1cFz+S*xrL;!|An?KzJ zbzHRHc)|DAxUuY#0akPcL#g_%;3uh>U3ycncZ8#RY&SPJ>*1*CBRH?jJgk2n{CtGt z@YutSCdr;mr#Cx-VLaP0urk~95165CY@0)s#HZ`O!@1E|F}($ip#H7Fo)M0&v0a&P zExct^UVH+xuwuB#>62}1X0zNu=4c+V$h#{tgHX70l$=y2%bI8%Gks^wH_?HLAfJ6P~!@}S+gY->>WpcdN= z;g`_|{Qz%WN#wi;8b)vQE%4&n8tfe5XocIBEBk48ssUc2f~SDq521K%g@=ICBOK>j zdma0)=qgH}f8tbXpX3ErK(f|uM@zphtA64WeDqpBo4H3n5Ii-)aiI0$pVM{gCOFIf z2xjy*RFA_T!u5Ngn@iu5d6w1guRWR2n*hHm;)J30V@QI8%rmt|`NZ{jL*Ydu-?Jmm zi~)X7?j9B;W$!bxUh@8fz8{yfX1(JXYd+Tt?>jl~WG{K?lIJ$_xgI;#jr(1myNsCg zo$N_3owKjR8I8{1&}vk-kQgI8EVLW#s%u&!&+#=$z^~g)B*ha8?N)Uu~Y9 zovcs)NG>4W^RW&OlZ748NC$wasvscM^LtsK<7%L^*z+B>D+^oDHe3bi`yl`P#T_1; z&yE;FAj9E3Ppki<{^@OSat1e1?ib;VVs>%J^C7^2y5V`3I&okBt!Ws) zg23a(bQiqLiL=T*r{HGIcQJ~>YTV0_Q%iT7uF zBA(x4Y&nYC&|Kw9V?V=}W%~K>HV{|&i?HQcGM$#w9}?Zf!J*Z0;Kw_bx9`EP707Al z*XmvHZdw~e5}c`Y>4S5@1aQ^|usp}Yj|1E&>=Bl(o-X$VjDjO0!X6p>AurN{VZmx& z-*a1OHF%qZOL=6X{}^71#dR{DPR5NDzrxr0 zy+b=oVW44S+6r9%(JLLw1$^iVI>J81^(EB#P2|BYO7P=EdL)ADCMVhm{j?%6p)-ZA zO5LV&4eOWYt=G@twO*3pl52)lTl9q=_dSR)R@#a@ZZ1I0ll#{v^l;Z4)u0oElWUH3x%LDe>m`xWGP+zX77`Lk zoIRa?Ys2=SIT=?0f8$7FN)KG_F|}GkxZL9|hScRA1=nDA&9e~K;L<&>TI(AT1oUqQ-MQ7%x6??Dn{2iE9!|csA7d6yaP+7r z=3h?AXY^!o*|>9xr`gv3$!UZk*9E_fxE&pi-SYN=BAsudbBGx(eS7UuR%Yr*>8(A& zs!Vuc9fLV2amn+>BBy@7_M|k2*`H5L`*=8ZS7mzVHLmqf zYmcxDI$@P|?2fO+2HkpIlrDf7^?ja3)CCAlXF!3>OUUUR(X}ieONF*Q7p*yy&b~|T z?B(p55Ur;k#2*I!b^*z`*z;`4EuBVOVgD2wtMd0CmG=`>aIVV0w2l%Tx zJU7Eft3ibcKCFYM2KbKVkT;eOwaOV&FG14q+Phv%BS8y`!}UG2$AlI;)bp=N3JZB# ztmgrJI41we*;OIWN|=IjiM7JLNx0RoaIZhF!^3NSlJXjWA-pByF8>T85WEOR%%0%Z z>fXl~0*{<;NkSSqGl;c19qn=6b}l7c_$UoG<30BzhVM&~TT#Uwqsp_m)D%WB5(ZQW z9!*S|o(xBzAWB>CSR!Z@BTFZ}0$BP~UY9?wjW-7!H(bKa#{-c-bFecxP#6k4(Gkcy z2$K+WBH)hl#-(jOtG%%mq5y85H&-3h-slOQzDDE{9Q)$kW;knoV^^^A8eRW!d6(!X#^rxu3`cd>()-2Ue-rcJuBzW(X7!A3n8^XiHU)Y4!Zk71i zS?zCwXSJDiODk6=;#ls`yzY6A$Up4!_Om2vyk_U z_MHaiKlf4Ix$rJ?>EGkBULXc@L5oL1mN5g;F^`RcN`zkEiZj=I`TFus$6?kORigb2D4+hT;XH9jgMxFj$eWg zMb9%o5qt#0qir0lS2(x{U|YmQ$|FnPLdG~8dV8V#N*mPm zJYIqB=K|egB$37LR9Tt3Pyn7}}uiRGLqeNqX_m8A08SdwO00g0i=2-y#@CgFg zL2l~lF5-*A6d0y-^JfxvpKsO8R0Pkr=>B{r`B^7!g2%;}5+#s)IZk41%5Tg55$)AH?0vYh% zhfu&jNq+O>_kQ`Ej9=&*K%gPHiNUv#hHHiKi&ekAYB{4GclH^5zc#H$-?SF-%&oZd zz3@}VR((SjqUTj6>GOC~3T)u7Htka@DjBqCtyXm~#_h)}sc$MmF4OIB_?cZ*x_>&txN8)@>?_x^sy|F&e>URj+a$QC zyx%aH-4OH|PDkM5z!oekjVYI)vFxD6vW6%Lye8-|1y!pAZ5tE{NsjO+-zI6U@>WAy zhiN--A`s;I)Rf|{E9|nkVX}Qg_|kM@f#%9?(YI>T&gdJ~dy6)0i?K@Z zkuq3c)r>SpGkN47Ld%47pTT=}gRh}M_cux!n~J41Ahy;2JbrOu^Ey1h4>cz(erQ3w z$-kE`@z>+H(JVgbC*G}5QZ4`1oYxoV-|C+T#5gl{&m8!L@X?1O&RmWR-D&@p5k2I*xn5!s4Lci+9 zCl69V5~NtO!VkvN$|m4PM2A_}6_wY<(4?0oGx8pQWW)c=9lqeDT)5RobX5o2<_q%` zgdo?bGX(Xnx(1I6AsKvncYMsZiE!q|UV}C!QLcTX`I!OB){tre`Bk`05;>s@p6x!C zAdgw(Xu!4K(re$v31_uZA)K~6n~Q-yoaQ3$tVEfs^H%_G6n_!2Wg;LfUc!)>CuwBj zSlS#(Bmc+JY9x(p9!sl3jDm|isstAWQ(s1`#5*ujN0a|O6@rK&4a08rJ(uD~!{l2- zpur^%IEIHP%(nPOAAw*`s=k42U{2}K&D975{Qtz?RX@RRlb@`o+OU{CAv{Fsw{iTA zJ5S^JJ*~7qzyF8uJL|eCzuN<1IWnlBYHT2CRYSHtM5zA-{2vnj9~Z~}+U9NA8zx5< zRzTdGhzt#T2hv1V4h#t7$ACae=%;Y~ ziUEOyFB}jimms2bsquikUuitlY$6>JVmx27iR6h(`0^1$+NZ}#`!=y>aS3rl$ncZ= z7)Zi&iuK}NbA*w*0`hAJXC(Q5h7?`G7Si%kFuXcAyx5ZO;w`b^wVlglKe^5>$FRkp zv2p|%<+SB@A-`5H!dR;}ITCn%7Ub9m!H#4{^L1bXdBm_xR5jI&Y0U&Oq)5k-lNLM-`fb&(B*e+*vXig*0l{Ae)= zxtcZMTd-FFk+xX?Rze*SqD;wgMA!$5!KFoACKE$70YeNo#x{Sby|GGo^wc%HfrzOP zykRc_O)`N2E6^sadCqjIYlvhy1x<)8Jo|6<7WX``kKX-UPd zUNtSt?|4y3aK`~uzqj!koG>1D8ZG|@Fy|As#%YLFm5cBC@IKo=62F@N=bsU$>8wzc zRZBG%^$}TfBx{;v{Z~kt+D5ANme#MQRL?!sJ9A(NIte`Iq1qY!J1NiGIyQeG9h3 zR_#RywPUl=d>O%PKdaKFnS@L?yYP#h+!2P!O2vdHAaZ|$N|QSyRR1vNDQ1M4B)MRn zH~j1$kO;n$H!vX=r%jG2zuKNS{ZSwyNzeIw)zF?gC_(43O z0%iskDY9F&Y1?(P4ypca+RuZ&O>8GY`}uEOzYDy+mYGdr70Uz*#@*Vq-4h_C`3jQG zU8|d~GJ`W&_pe6)qJQc6AE|{<179qCV=Ig;{*4GX`QOGb!Gbl#--vJ+I@?e`^FciD z7dcz-#C!=RwzUH;O?!$G6KXaQBG?DULr^#Q+Ze&0;U@%`PVftTmyaf)k9x^$a7!1A=A%V4XHb(f%}>u z7P{~v9}@*0*?!VN^WV^mywdTcO%bH%5;ium>(g|3WN#u{;rl5lt2AnjwbUfj-vuSz zbdEEZ-%TK)W~hMq^4;fH)hadwb^Rx&K~>p{?WJ@PHxsE3Y8(~6E9st_^)$^scU#?VdD334y)k2W_-0TvUJ0QmwX)i_ZYkf@AEsYs$61sG*b zv5}z2X2`Jlvhi?_p?Gi7xJ$SuOgIeefmszbj+ah*oJIl$hN56Wc68rmmBLF4G8(wn z8bd=&onC!!3Vw(oxUPmhwLzL3p4&K`VW6MJKv!etaPahy+LKC4xcl5O@MwK6bp+f&VQC9kd1J$R zil;&0HAzi3g5%urBIc{ESCa%pFD^#ZmOtG~)gS<1Ap?Gf2iS~{Y<~@YHUBUiL&S0o zVTYP}Wg(&`g%>5x`GD0n0pIyn!$ z;OG_7QetV?6dehRP-{2r;=U?ZLS?nyY&vrdd{0*ANW|?av?t&;6kH$wp7GYH_b_Q@ ztq6v$hZ)6q_Y*{uvVLT|`!NFA`|fGRyJsZioQ!Y2a8spOH;~fP`0*hmFLUC);`BgL zuqWB9yNBsW3Ebx}>$0PfL~h(xda*$#K@d%m)DSh;edVonwwV7hK>FG#HS!#IL z(EV(h_ljmcW7Z9buOilDPw*nxm3D{WLCb*4(;Rs8bGH2QU}**~Q-%c| zMo(RgFLNdZ?nfURlR&>1UZZ_1MN{yN0rt0=%X!`&0;tJ}o4eV;2Lt!3-rZ%l!D`Vp zYaAp624G_r|IGt%g&#I!L*w%rv=z;lDd7~~j9lx`{6(DKgwn47Ho^Q?9Js~!u5Kha z;3gpDJ>z|Q@J9InX=>ySG)mty{>2*R50bG4(u_X`Qf9(cbK|VV76z;uw)T0rFO{z?SCOwfzev8eTurns z!{@ni@^uBGB42-ufUwoOOC#nuLo`Uic7>qzP3@8n#-f|(ybX) zdxfNsuhT@nE|1DrzC!Il?AxSB zpyg5dYBdQV)JGmia8QnC3F|1Sl1f{m@)Zq7r>?_-k>^>9qQEMo$qi7%Oo&MNgpfruoBlDi?u-Q$qE$3^b0 z7rCqW>8f%U6v0^fDg(No+_eXFls_PM)ri(a?pnkDKAyr=ayKtMP>?EeS8>fUw}u3K z>IS(hJacuq`_)H%Ke_uCK$`LAK-y34M$d0pH;6$wy^1~yrR)lQ7CNr2&stj03*cN! zr;S`8?i!4@ZhEVa%)J>=k-5VW5C!PnTO}0JX~zkl{&)zI|16z$>wQVq?B|ntI`Rby z_E!W(>9+lW`BS>B0;Uo2w;A$RHtukC!FY*i;3@N$hya{-H(p}5ah%-H*-^?`WYdWi zsJ!76OOdtpS)9Y?*{?R7$b!C_sFc|ORA%?-9%#8B6jG_o<_yHwCyxDk74k;Rw4sjA z9cRs~A?C|Zi~f2l3FqU@tUJx0sdzX^FKtm;PBJD2T&KFDHOy}^pdwd=jI>_|JE7(M zzwEsWcvRK7H$Ib@z=%_Ku=zB$Il^h_DJdQg!L%BQ8YF{Y6F?=378I?e(kd65QMBad zFfg0V<|Zgwt@hM&$~lJ~5J?P5Bm*%Ch#D?p6sl394kncd3WQ7Y|NY*z_gs>IVlU_a zeb34BWcJ!?t-UVqdavv9uC3q>uJlDXx{8}ZM?sqrMbcat$NWMCuTU*4-i|?ifLl_F z2QDahC6r%(B77VIQ!yWCzT||UuKJS{kMRYl=+3&ldgx)$!@d0yo04NU1zKQ^A;)mi zM~Y(U9cwPUK#<0d^3P#Qc=~}Y8OxUVr6u0Fa2FafAeIpcq5L|hG$ihO6`fRta zo(b7Qep1hzGoZ_O+@kxD=3GT&k1L9I8Oto*aIH|qK%;PQC~xTr(SnuU1${nmDG&(U z*w*Pq3tkGKEyV%T+o`Gwju=f@3- ziciarYmIdaRwwY|MR-*@FankiETNt{FrrVb1IrL99r&yA<1=hbqAqMVrdM6KM`Iem zk8!-(=Et?hQi4JFF##a_c%B5nk4qRJKdv?OWfK0I@?*WQk(@g9d~^8?7K_#kx2wTC z05Ze+VvPKAZ1Pu3(B{Xd<2wU;=R1t<&Ue5LZN7s>DIOfFyF2TFEU;KlOf|Han#J-4 zhEj#~SgN6w$eO`=lxbzLBi5`~k0Rc7@)z>Hw%$5Vrn~5G$#l1WRi=BYo)7A^=j8R> zdrn>-Wx5U8qThX8rh95~if6jSa>^qc{*M#eDG`J^GCdM({uh>Lkx?iD*@l1E9FkQKSUCwi!F~5zQ&$amNVv&TP1(?a; z83XH_SO|vSgzKqiEk94@cyXctbG(O);#%XWZ~X!MH~qQrCz#{iY0SS6udehZ#{BaT z0QhHOI?8zdJMxl>Gwki=a%H4Ge-7dnq@EYL&Pj!8xr<7KyeDCrF>03d35{?m5>gEV z*HjG~Bn<p__+i|On4~8SOQdxB|ycP0gDk6JXDOa8xXTbU=5-VL-XxL z9|k||MIT1quc!}O%-0ER$JTgpyaf6wbkh@Ewu-zLQ>;eTZxhuq(Tg!RV3Sv|Qh31+ z({Ho%Ug$BBL7B@|2JpZ7PKh2a%3)kIFRH{;^(f5C)Vb^Nw%be}roR-?0c<~g^)VmCJ`RTmsKeK-wyE+9blo>cE-6Odv3g|;G^ehH$ne1LWLGSez zE-7|QC3gf=(m{23;S<=b(WdXBt#I6!95K8vS_&})llS3MD#Dyg5REt70bM*gLu_lG zo#w)*a%{(;LR9P>QRm(Q%G&NKY*f`AVzoISB+)ntR0n=SQNB?Cg*MNFwgEpDoR9&^x(_o<<`b6+ z^}l7U@Zjj#OG5oQi^Hv;{=LQ{Lj5_98;@87e~V4+zg5)!O`}rr1sXE#FicQcXu_hC z(hW83i23sgi`0y;lYQVcI5OoeveaPJO3WVFt;Fa_D`5qqmAn52t;ELJGiYV4#gyaM zZ)|<|uP{F`7ce>9{KSL5OVEc)@Ctoch!kXZmAPKg>EjO}ffHW#q}Jp2A_Bm!X?FK> zUt%n~Ptv{DT9i+bS~xJ2RP&y@Y^xT!)~T2>x6s2a%&BK6PSYGwfd7)_3`%GY=O{uk zR*X3c)-9}o&| zMp!IYFUFh$>&3jp*}_-sdJX^feqPjpsvERTStT|Lj#llR7p>XCm^aYt)6G3d?c~fO zyUdLi^F-ZLOx1+p;D)sW7ynX-OY;f*Cj$LYAvhRIfm2FN_3jR zZs*sdU(5uA@@|R3=N5~ns+N6CDz;}A{-Tx*>e;gBi~{r{n}42mJ*}me`CY8(*z>!x zUqPGuTa1FmKU=!Z?~);K+rs5f#IaCH$``IgOs`z@Vk9hZUlIz}>`ykVP ze34$M-zoSj z8k)dg{~8S))T5zXmurvl+>ORkf`F`6XNAIH5lMjJ-f?3o;VAr z#R*Nf7yTEja=qxk$lKD}d@wmaQWEDM;6;R69L@nTVp}T~*{<%wDQlYJ*p3H<3${!% zblUsPC)7eyA(YH-m3?s3+6&Qybu(z9uGHtT*pF3zdqx!Vv#?N7(`a!Y1{6Lg=10aqIL7O(`rF?SBwz#m+vZm5S+%;T=OvT-Z<4W(>5L$o`GS zOQaHQQ_fB1Mm1IZTScD32OYI^>z9NFp$C=1dN54}pjBJSc63f^wQw3u)hNP zCI*hi5`GX1f9Yb}z=H?;V!#s-+&93H6(*qJfCQ=7owc#lTkqSA5p(SSXD}}w^2Sc7 z?Z(m{U=Np$9RN!&mH=$`VG@Atejx+2-M1V1KS{Vr6nvY1aod&C@Pkj~^r0%|eUVEk z-bX}#%Ni9mAmelxS%szn83}!}r}-G+R*XdJ5m8C98}HOL6^(L!NmVzvdacXdv##XR z)ddPn$Nnd3X3&YgDO#aL%~)H{DZy+}=sc-Ou?&kBwn4siTeCux>J@gI+kC#o$a&OI zQ^H(|nluuiO;A9s;<$`|BdZ$g5)w~X3_~n>rTBTQ`s9Ew(kGV-_we=+2q!@bWfwGR zi{(6Dfoy!NMaQ`T5}Q6SKjy)nIPBi@dHDna?auZ!YQeXK;A`Q?in~V21SNdb5J$s} z6{FS?nG7%Pf@shx2N-37Qa+%>O8Gz#3tl=lrB1|NDjH_Xg|y-8*7yyPjT)ve5=s#m z%G@&a+t6sh2t+Q+T=JfT-DR>#lk*`X3^%rPpgwT1W|tetC*x!I;Q{VP7Q1A**e!B? z_-Kkbcc^7yhpxf4ADO-2mbGh=Vq2PMZpQSloCx103Q>{Xw)aAB08y0Q05;HDRgB(# z5TmySW9bXaEP8uM0-(1_34q@In*q{WgQ0Jh@R`#aOd;EXP;*8^mz!Ylga&k{fzUXh zrO+m!Ixd0Cyh6}fhD=C3D&lz#{65*1f{cy53@Q6cNYOu*eXDA!*-k_(5YifEwQPwf zMP^s&T@XB)*;q&IuPros3PkqzTcdh>8MXB>SgdQ(!D^apxFJD@BndSl(Vt$v>k z!ueQ4#;nSC*b!Rgx#rvyi@->7eW|O>RY*oE1Ifuy+9a0~+eK*GJ5hRr9YcC+vgnQ5 zwLw=R-yr%xZ;*13Z;*1Jw;IyhK2qxbNfy09TWmCzUb~p|)@CdnD*^1@xLyJ+hJGaj zq_;*xA0^>tNX6Ls@kII7Ch{#3FW<=fy6+T#wnq7u#>Jx^^P_24DC#cZ7^fDGy33w! zHHw@&ZIu(YxO=ZNxtpY8oqe!Npf51;)V;Li9jk=AiwYIo5l5|^@-97;S|>Fo2)uOe z$mk~V7>8bBJBHL4BgNu2k$cowWi?Rb9uX~ZLx@yKxyORsJp~`5(aUHfz3?H)IP|iv zZ&$##+mj22ULyPUWn=f<;(v&dBV?Y)zU|`jOJpAyy2w6=MTo;Ria}srx+NC(Wdq}b z?+b-O@<1Fm8fAh(@aAQU!$xB*aZkkIb`ghyfj(f+O8G$WP)Hi$5CjHsC^F8N+-UrU zxGCbW>dVDpT`r)CiEff8>bFE9>V!y)h)9$nG)TA*iI&z6k+|_oL}J}F*gaFLXf%3$ zBG;COmj1chqEEmF^toQ>6Eqp6Pk<8iDf*|P&zocP3H|dw4U0biTLPfZf0qF0^S2CG z`sX?cgFd7FO;3lp9@YS2R-0&^)3(?aR>-Dw4DB|uvR9$7g7!os0td_|OtZ3g9H z#FZ5%7m2XZ^;pc-Q5LYK8^{UrL6+T2Ruv6|wMJZh(TyxAADg1`5p)9i7=bMuFCRIw zU_lA;5fxKDf;hMI6p-m^{W@W-1cVaLf?~u8Z?Tk<=xdyuw5p7@oMIPMQckjP>1(2( zWHkDkpf#{g#exF9#suQrtt}qdlQ=<%`+6v*;M|Hhfp$WiKtd4bZY@Y86*W=ms)9Z- z;>7J#6rWIH1^r;$QhY*z6(j`FP<#p=`q(pwPf=Ix9zb0sZi@I^e+uy_;6Vb4*0RPq$$3wnhNg}tcg zl}u06e$cDvuZmu8jL|FP>9P41y>?0f^qPbf2wIT(r;M@W>0t>c%2QBf>IlQn4UQlq zsC`~+WK64b*I~U4h=vIsfa1j{*+!K{E`4$su=JT`Eq$8nqei7#_q6u~3+-{y6K8)p zwF4uH0#4PJi0V$!Mbwu594R*)T#8-1$z~EVbtC}g4tS7eeX?vuh^}&AK1iaYU6kn~#^u-d z?M0G)H%6>bXho975i96QBu2?B&Ca0_$Lzq1~S3cbC5wM>>%!UpmwIP z3AB?lONYB^MhPBb{xl1=LZh)kuo2w_Q+|vHso0|0b|Hw#9qq*pp_{mHZZ4M{{D=zO zgdMlo4Pzbuz$W~L5d07OK<=0{MO)5Qh9s7mphf_3(1iQhgkseEypjTORY@h=zr2#| zsKgemw!UfWzh6bZ0)kO{vxj^g9-~*t*K6lm^g31o)PE%adcB$fOTLbh@K=+skek*N zk7a35Owl+_e&ZYCdw8y{2KN7~6MGrG?sc zLHRwC%Dlf$Gy+lIgn9NtZvH%QhtpOFx=J5q@1w96!Qv)-WGU_(SgSyX2dovt1zA_( zC}}9Q-0oI6>?qcPo!;PeS$*Q!4w#Cq?b>@h#Jal9UTrLdM$k`I;V!pm)mmp zTlD6AYZ=Z33CiOYQS}xQ^vW1f#!c;c!YJK)DUL6E$O*ZaB6b9EA>UL z5eU^-yC1kBf$isySjYxAJs6$%CEhJa9ZvKpj&Mn{Qm_xF9jW!tjctKgAL@^#d7Rq- z8@Hx>U=x)ag=oOJpj(&sQR0VEo-N^QkCrlDtyNPjlA>_;C^K%`TUD&^K&=v>3FlAG zgdR_;?=DQB$IWGm9`*lbKvCb)7bFt2`H}=co0XE9NRNr~lbQsuTxotX*H`u)?(`t4 zxwzE{J8QC@gLs2TCCjq}CV2TpmxfwvT9ZAm0I{G=LRq}uCR=j)^RXTkN`HupHy^sn zK5T}6jJqEKg~o|fif>e(`fGE!s3KV4!@;#;8V{I-I>P2JmzG^4JD|pZ+3* zgbRl+u+wk760Vcm7i3*>%HCV^wUGZkdfy9y|CtLjYC6fbU*n`MCQGcj+f%E^vM@-p zQYx|_rc#ly!V;T2rCwY`WK}Cp#$*tmOE#EpH&zPbqO;gG=?=&|u3#{*&TYicw)U0P zV$Tk2{xX&cZezW4GM0tYZ!y=)E{_F+u%}{u=$x81Y{$XMu%|hMd3~Gef$Pv5p%whd z(z|d5MbI6M`6g$d3Gj!p^5jZ?hyYgy<#^NX2plz_I$yj937HtPdw2j}-Awfh4W8xc1bDJ2s5zH?bzR!&%|1pO|-fS%S zqXhODOP-ZLld+^i0=tc}-!b6BrBasvR%|H}r2{f0^=j(V#rq65PN27AW&mQ;<%VXA z)mBU{aryCFbE9Q|eU7bxp_@Ae+A{TKO#YnHYuM!nXU);sxRA5U*WTr8>++$MxTT@d zzbH^UxR>(_gJK=t64&8K&knPNMN6_u1W$;#7> zI~%O^BVN7(^$L1J){VG`1vUVNmrQ}W`9A9AgWu|5*i<>wwzAX<} ziPVBoY`>gL)Bqwsx; zz0QazKmwRe0=9d-(C&5o{S%5|VU1Ej{}?0{qfgcjA8b7M*n1opf8BT=%&o zwHwQhGEj(H2IKv62pb}!vX%nScVSebZ)lZimcmL%0x>qFK4|wvv<1=rn){_*3C9|W z3BcWi+RR)GF?lIQ*;1r4qn*aBA=~})fzpZOoVZ>W*MB0A&9Iw$_8*%XMquK_SmKuM zfr{JjlTkI6oR9#>*&#_F=cA0lMT^n-A^Tok;rS(+-!H!L7@hcfzgb zhtgrsfbpmIwcp`IrR^+SGM9e29dkKcF^=)CaTTWVrl&^(wP~jsZ#d-liWF{R_nxu4 zx9D+p%I86=wV)bLe=&l7R+!W&uy;k;7yXRA_@}1D0vX3;a^6<37{rg)j z=EXS3g}tQjX&xROl{+I+19*EYG`cIaqh`OGH`{E}Dz`~eO4)nup3g$?Cy5dI+`kev zy5x2!+)`wZm-p7#xj`GA;8%e*k3v^7aPUpWUxBbuR{g6lY0Fl$ zFRBlrJvU)|Qv@Qnn)61oMe`nh3_YKRgEGgXS)++`hKqC7A?rG`@^7F1Bvv8AP z(SxoP4D*CD+>1*q*IkNM8d>vPCiAL2g)a<89M=+FxC8+heViER~j|K7?r#t@1+GlhPiZk2f|*ds3e_HbmRALA8fd zqh2n_SvwMSX-_&Pt_FoJ6z4~3ejhW4H)2iOI!xybjY=|tG79;QPGbdu7kIy2mp}&m zc1lukCV6&qJDl4x{XO`Vb|YYpaOy!1W2y;ju;wN=It5pp*i`4#&7)%QrNhyy9y}qt z^1QtFD0n9_gV#xTiiF{hD_IX_Nf<7<5FUy!eC^>EaDtCN!bKZgHtq_HLPl^jbA|{d z-CQMM!Uf*0B}{<8gDAsggaTa9F>K)?0S6D@j4@e02O-7nL8*7)O-sr1I1#=~Qc`e} zt{Z+ZXXJZuV{WNA8?m_e78mk1uV8M3ae;30lgzE|!##i-rf1+z=mUSW(!tITR9NY_ zf43Dkk+(Dy>0jgb?^P7^$o7yZN@#-yoh{?v>hH$rPfkh(0f-fI z#fH&LwSoCXpe%F@lL#HBZyUmLaA+cFASYS%6&wJgdKG`MlkUlt2vFO8lBg>yqEC`M z%ygHrqKZ+KSU6p;R4w5N)VZJJfEg8n&w>;9@YV$qYpLiPm04ze0n59~o;*`g)Y4%{ zz>EJtEjW>sE}jhN$eEoWB`W?NYyTAN%}&bwDjguL|6Mz96FVS`BPAdlWlBJp$&@a0 zFku+%gL|%^{=roAxcUW?_(8%8Crhxq?WBlohN7Pq2<=K|F+U zo%aFU^*$ql=O0-j!nl6@K!x>9lzk~yid5mptglIO?>&k*aE<0L7#eS}$Gb2zFv%E0 zQ+X9btCH^&LsMa4s9!!r=R!9zsvpmyhGgs3A_De|1qFRB0}b)pE@dy7;z-D9xR9;wOt zTjrR7w!$Z>fMB;F%Aa0A&TFg_WkRvkb)rmE%x1i(cuEmf(+ZW>H5>A|ObAwxWQ=Ml zBK1+NGTV5PTp3GEhQ*jM6I#K>(eU1=PIyMS@ZjW|;s+ zDz;-p*Al$5V+2Smq_;|cUM8SgA(F_75$#Jfch2|N^5foSCG;>2albBTU{rJbxjtRJ zn?1s`j0iz)t`Hz{7MT+?8`VK|DRM#T<+c+zH49VGgm1+;0iZ@WTU!7b)nDoUGQ(=J z?^^I45RYLQCBuE~ML&!b9CZShsA`%^fALMIi4$%s6+me+H{q zv45l|m6rX}z%oSF6#FL+ucVMgarO_hi2YOITEVbo|41v>U5ZxruzwJz>>mUy`$s}C z`$sJ)EgOR9uVnwkJoU(>NtO*Ht-<6AG!ALaQfW=^HW1q+Hjv$>4OdAhW&dVt{s#3{=bxTF-RaK~y5d4x(}ps3y!|2mK%!OetyyDFs8> zL8-`q>DylIAb1()=lC;%gaPcG+lI#5JLsfs;|!PZa+Vfi=W$JkgxO==6ig_)gyG;q z#9R8C7`8EcXEy7w?47&#wXeIqQzhRjdxyCpYsB7RZiJ~YMC~0by`2h!l^#_XC~HQm zZ_dcxQS~RN2VdFV;kWR?F10FqN0nyTJF1Dz)mF1@^`KXKhj{=fv3K|#c1d)zcT~~; z_W}w+S=l=_j6^7(3P!e2o^1)`LqOTgnhkyNP?%=h3xs|TduJsfNPCCaEB4M51jI;a zlKiPRSW>}a{jrsYCmWDqLFy$TvA&H8;tcVTq zmKD(ktPfKv%`$y-=9U#pLv8+@(73;LxOxFFCEGy4AtnATBu&la|md(U%%W8maI#83L-gu6f4peZWmK6); z?Fo6IzOW$_-4%;vx;vx>-TtP{P%Hmj(E*k+Z4MNe5LI*a1pqB+`TRT;RceV>BX z&Aws}PGMhB5XerG3N}&fD_M*;V)oTZnFNoYJ;TJ;cyN6d8)sjQ@2Ycj!Ny`ia>E+? zrv+z38Gh8pvH_)RECndb#u{W!SkTw-4<3uV3&NWjM-Nz%PH+Ebv9QN#RcB%(6!1P zb-aBASGU)88lqxa`%UTn_S&wxB%lpT&&BO2xLc782u=gk3^je`P&U^7PiSKiQD9^B zL7$b4r9!Z=e#MZov7QAgM1F((<+U`a#Kwx(FKm0O=X%qwn^4IA)OypPID2b1`gzLr zrh2rpyS?=a;>6y19RUm=ZeQ6Vp&p*9Uqtk&Jypx1l=6)F71o=iCB52O(jMAcsy(o< zHpJQ^>rIv)U0t;YCvNGin%8`&^(NdU%-dkp))>D0U$x%U^_@8Ti%_!Hn+O-%79&9H z^(I0galMIv```7Z__dT2=pp~R-h_Gb*uq@Y{-UtKORk9S%jBi!nw%}VZTsuX*PC>i z!IZ82y{tD)AvcEkVNFirD4w+h6+0^&osm?Qmsn;|%j<^3^`>r;_phszcM*$71@JmTSdJL z;u%^+ryIntYZa+hCCmYSWkXhd`V#6-ZM~@pNndHbNmK!~Otemv z3ClD^P}5tojTPq%YTd1Kh1CMYz%*!G)Jh!vFaQvuLZlf zUHsK7m{7w;e!9VqLhU+0jU`6+@}J+^N)y-T5?7i&_)~19=@?d>lob?FAy`2JIuNI< zptZDuRv>@eN|UmJZ2PC@deg3JsdJ{WYk&Xsrcj*y(|{(Na=ob@t?Xg{AWqpo2w3)y zgnHUPh(5LbBa2eX{`rdQP12g)Z6LNuY#?cg*g(-XCE7sJrc>EKvM7anvtR?UP5*yf zZ_>_-w|CGR+s1iC!XynNv_--)j}v-P!W?F!>~)6!cfE=FyNC8p6`(?0UhJK_j2rH=6 z01Tk!@%LPBx_pnVjeqHSlZLFPv8*n#l22h-eS^tS%ZfM?Z&?uoZOe*jXKq>Xt5aK6 zoQb7nMb7`1SXQc?Uw`r9Z@S(zeYZW9L($#dEvsvh=QNhp&#mNBSXQH%9JQ?ML9{Ka zUIy_DEvwTF;@7pT{?Z`>x~QFes-V&v&S<^q0^72(mr*=D*PEI!T3^22BzlM9;OnTx z>9$!VVbNLEiOyo1Rg4#29$m06gOZKWhkZprEBlJQI&=GqB0}t|lZloBSDIL2bft+V zms)9JFXL94{5@?f8$@4YrAdIJHUwE~MgpRQwI`+Atwb~I^(m#|3Fxe^l%gjFmVN%q zUT?}Yss&cE+$2L*y&h$0m9(!2Puf>??I| zBM!XFN)t)s_WiDdUqIb8EEVXQ-jx*Y0@q zJ6-j@wz8==JE|O|Ll6~lbiwp4Xfc=Wyaxxxp4~YOzZ-U9HPF;|{uJ7H?7S{q2840{ zg?@pKo4ece3vudJ-oI7uizMBK#{1fLzUXw|pk<)m9jJ4c``Ruk0BUVcN>2LEuC6N_ zYK4{6WsZLd+6R)Z}~CqM0>8QG%2(T z-ZDZL1~$X%rrSzBD{xGEPGef=0-WF;k$gPE>A2#fPcBUIZ$Jfg(rx7xI zR|9Qv{=NJ>(VX30d{0IloFbVU%kS-*mEmIpoI5giggab;jse=ZSKu9_%e?^Gc2fL*0$|4a z{}6LzREC;R)m%QJ=TFDO*L184pRw{xo4iUAkEdiDGEmSvuF0$QNiSC+ z*T#$vJ^$qzoVyGh_4t=$)+F*HBR_e)F(J8DFInt!!bvN0#QW!k$| z;m$+)~G zaj>;9@3y++PA5+&9ex~8%AEO5GyRmwhp5K73KhCrKHf0r<|2@(!zxts7X! zORA37SO>0l^}w+`Jow^^{BqZj!e_$AT+VIf$E;6wzQ9j5s84qA6S%MUgeH``z$r15 zTJRmPg+T52xK&{rzr1i?q-PD{wb_%sdWZgYr80Bkbj?NZ z#LzwBYWdph98$1a-%a}GaL@&+T^#?& z54IQ+fCM(($vEVEO)o-6 zCIwrD6s{dojOg?A{NQek#hl>hx&94Nva;x@$|y>%0ZE%h=eR&Z8wrl$waz!q)Jwy- zsCcq>s-C(92cj@SM&VjBwLfCftt|sHI>VnLRJ0{`NWt3hegyNkOi>W`|2|MV+QK1V zO8op>pzR{;p9$1V$=uovzqIGaH*3$&d>XeNXYA3Qzf606VvRnzA>%kMM|R=PG2FnA ze*RQ_(yO@tpwUdfkik7e{EcYBt4$fl(56@44n)dE1UlUQ=LBZa3d%@5;6W-(AT0L&p3pe8=Q1y(1`7VJ3htnQ51ZQ$ISZHj!zj%$#{FmC#d9_ zv>^qJJNBcu*9^?{|7W1~A~kGL|Eg{ZHvB~aZ8Za814C%0!Y`iJ^k!xrjy6w?H(U>8 zf>902IIgYP>ueeo=uGjq;(pygI0bH|6!-AI5U6$ko$4z?AO5!Wc@p~9dwrQ(A@0B) z^#;JFAK-J2f)9v|JCG~qoa4->*Vc47-(>`Dc${=jQpOfS@Hi6tfm7z4DQG32F?@*-kC3E5+XcS8sv3TsRae@1*oA`Zf!S zfF4b{=7Q%&j|AE>yIOx6sI^6vv|sd14>sKfI#TBJt3n66_HRVfEWLHEXC}`hLd9bW zT*Zk0A}~<+FFF$L8epbhnR%QSxIe$~CSs%WU1Ks{CfzV4`*`t0E1avtHK&RODBpEW zZVMmpKehaLSKq0d@UM+~SAX}&yHkUQr)p!4BjZ#f>jvSXIX|ANtvQ0`Pt~(-ni|OY zv7_iby`dEzl)O`+he4qFJqX;0RDiQ+GoGT{yG6dgw!^A7chw?h|W%#=i{;7n&E#X}qjQ_rbe}9bOArc;mBJ|L|NO%hbvL3ob!k3)Q z@TC$CV0*M48ZP0Vf>`v>RT4fV@gpU?OX9DQ@JOOi=*JTNm4wGh*oBVjp&L{@&XVe( zn-Dh2UdhC7562mOsf5FKhkERvjSp=2*!Y~Putijq>%c@ZonQvnIh_Z!%2_8QoFw6s z5_T~>rqj&t?}iM7BNlU+qYsGz{G>xa9{#}NJg&bR{y4??uAVb2P?r+u%!R8hdczyj z^#T<-Y#N1odq@VoFFt$$T~nu|<;I|#^IY&*T6v-K_<|?W9vYeC2;F>AtGv}2_uh&3 zq_}rjn)kV!oeQ2AD)}z}*Sj`w?3jNI4%)z1oK`u$%S^pitDNbCnv)d%1UzrHTdSN1 zWXMel;ieAU^p)>P!lgc;g3nCvC^P?T^>Wa3Pc-xTCWRwOA>SeHf-Uo~t6LS-gP!zM z_+Szqdr&GHjkejfos`;+B~9Du#2@MeXeXXPDf$vGN|9PoQAg6Wt<0c@(k1p*Ghd63 zy$G?+<7WP^<0EqrsVY2y3Qw9@=-%w(=A=uL|z!2a( z3W1q`+-x}I@`P5-WZjc)N^;_+t)$S(S$GYtoWjWbk|ZZox1><$UPgv)m*4S{bbpeo zAR=kMlGr=s_d5B_#V^>HnLi4d+K`F$gnlY%*URq+=74{2GEKNOYOw}E^4%agu9h6| zcZD0)M!+K;4lr^sfIFe`kxXMRQrHo5(s@o^3!8f)+Vhik&p9ZwT{>O+5FB)$g$TIn zL%)B zNiJVAu_aK1C^K&?-dp7TPI;e|9(gFn76+?%4)eSm_=;OBsZ+XmEl=)9f< zzLrp6wA3)m%u5oK4@{JL$4D#$r49a2;4VqHS$?mT`=7jUfQ9=(-VkYkcX8t+CJB&HZXiS#a`)&4O6ie)_5<7~}P^^YcF-j!u zHv9^haK!>JN|=uTVTPUXYv>DRUY{rilrn+7U#xfeY^i81as)oWvukkGW?nohO&o`{;R|+VWGIXdIHD_k?SP#X-2{oIYwu~ z`G}Vi)=ExX<#z+Tfmz^?ga8uE2{$L47A#oI z;@>lJ@lr?nZkuc^z$JqJ5!!K$#-6e78fj-QCRuTvRNQ!ZtHUMq|zrFv2G-WOe zwEDN4g*`e?VlI@B#xzPo2yNFAELg1P3;$FK7pGw)VG!ukIuk&p8C zsehN>Kj2qy3O9S4)b`%vRaJ}EBQ8*z+M7N@hf!W7f9c%}oUJG~bEm#b&P$6I=JT9~ zt_~ba@qfmB+(qe`JEQuIx?wMx-kRjx8`zT4Iz(;wJ^+;@bFcn(+$}usKDkRQ@;ER{wBw zse_(^ZM&}CJ**Ue^?AeG*3)A>y?jCyPztVpPwS8DPviAxc%wb2rS!%BIL|??zk3*d z@`rh1-@U`0`LpmX<~}kHqrP(du|DhRv7TN&W8dv*y~6$`u|D8T&ZXUSmdo`A-TH$b z{XzCuY|=N&!&DIk{!`fVA{?8?r`IceGh>hLZ^y7KvBtxNHz+i@AY+K8^x@7!&}5Qw zpvk0XUqgleW2g)=q_4I5;KeHiDiO+y6kxKaHA^6yOHU>}ehC z+{(uY8O^>M*yz?vML`57hu*nas{})6MA#)^w}g`=+=t;YXn>i2mM7fdhG;g+9B!b) z&LzF*pDFsB6u00lYw`anc-a3#^$AXB$4$sE74Ww3)g$vtDiPCunW(ur_xGo-#JMT{4B5fqU|x1)_@i1XWaj z1rn$B1Am5hbmyCN;`zkzW!XT~i5*&Hi8C?k7^0FAqrhNGT!~RoM@!s^QDDj?$%#=A zR3&{9qo9hG^i@&IRU=ZYUTVP`U?H?#4xEN%C8Y8l^rAHbJq=z?PGGG9bfXu1enlBR z@P8aUT;vMWc?4(A0$h*+j7RL5;(SDK9-75pfb$WDKZf%t>TBY>hXYAjkVk`#{lxlZ z5Buws`0x2T_^&>S;%D#pkNzqA51ldot1qJEL(CIDzZCyN07alU0{l+`J0$+^2Q*-N zK+Co9AIP7)82O<7N2e)O`NFai&>u=h=r&LQj83?G2T=?lQAjL^0H$a6SkS?(t{$-< zgIuR?HNvW_h&WaMHykQM!mk`l0`=-vN`$ z&OAJINxeH$@taJ=Zzz9>DE^NEwdtaaSf66XYdqrj@5byyEb0nGwZ0Lzet`Lc8|gaL zOYf_cZ&(@2a)Ow!v8%^fy$pVs2;AeN>Ni}2fwLL8SDSRmVt@wmH9E& z|3ka}%r5;EyPcKpE729MFw*xH+fc6Ba7}ix$KOm%3XT4rG=uAr3H6t={_A?wAN8hb z`P)oO-l*!sz7SP%I)$yHTyA&4V155Kth8a_*g;l!qv;ajzY>$eTPuiw^oVN>J`9}Zy8 zD8O$18I4o5S?_Cb9Rkl@9r&NsjAQ3B3Rg|lKEYe5WQ0SoSpkT81bz=o z3z|e<;(A9zm)nq~-h*7~)q=A@B7xdTg6+iLK-&bXHwEZ_!i=p^=VF{XgNGo+BzYV8S9~y20>m>b4BBkYJ6b&Dd zGu}W;(P{DFf>pw4AES}*<#KNeTaAite-{z(w|4IbZ1p}gbTV3dU^2?=;ExQ>8*s+< zvw{XRYX>U7E(Ouj$d9D8hqRfsPfXQj)-)khvlD_Bnb7aOuN>57ZiNyub88brvk^TS z-_C4A^M4xF&P7tm)~WjFK6t8C!_jF7)*wp*#vEw~IJI*TQ3CWRc}I) zYn#6xPHKo3=+@*a&=!oZ31Ckcf0|oEZ3Muz_R~kC<7W&?zXJd*0f45DNyQJlatHcU zvQ5h<05qnLVdm>Rb}SGixD(0!p+SSA6+MX5n{&{tz4&nY?Uy0c!XhwicLN2c-<%aq z8yc53V=~IV8^8sAG1o=WT!Z6s-MyV@gQ95z z9etv^oRi2~TG*goKBR9yl=5LQ>qqe)0s&6~5l>D=j=Oy*=kCw(w)Xd`zo`7ARryKu z=fivW845g!f;+4RoJ0dU0F+rRz?=@$KITXH(DgPi+0R-dSwgA@E1ADo4ZOPb`Rb4f%+zK_UX@(Ywc4Y_Y8f}@r@5cdnzGP7nZB9K6_LGD^d z#5=k2sC+)772!7E-G^?vpx5?fD5$ZGbv4K+#jWyuC=JEPcCJd3@Vy@*_b>lERr3P? zB$_>BMjZg;tPk9HyBWz}lns`=on@D)Z<_f{4N^y>VcetZzd2BbPro0bCT>5%My>_d zx(aJt#T%{t2o1*MT5CVTwjusn?nl_J_9MI&-H(6~^0nZn0MND(XnFxga5`^gut`H$ z0N$rhMo*^yjQAk+|628Qs@K(SfPP9)?4 zD*J&Avs(Bz1pwF&?l$W~zTK5(Z~RjFC-5EgRb#8P2m`?n>}=I6{Sal7#qEN8o#dpH zy)y~*vQ15BQxjU;3jV|~zKbZ;f*f}{2jaIVX&~akAez8kn?RSXpiB1Qu6E=DL3e%* zoJD89Al*jr#K3l<%+CGz{}d&pQ!&YR(jVKPBqe>M0;?O%-hY4A>sB=X!TICr<;9B`}&xYdM#X$6K% z5xm5h0!KTyBd_4qoq|^v#qf$)O1vUA16!Mj;rP0hoYg9UI2FYm;9uu1;*IL}1cf(X zOeKv#md!D|*$ljaoGRHFk2jdGh|-@>^Yq*-5dUbngxdZ6UCeHw8ZbIXlUQs0Q1zOaJ_vxck@iP&Gb;n!a zH?QD7jbZhb(gQ{GyoVG3ujC(*3Nj-|$aI>v;2)qM5r2WEb>h7fd|c_NP6W0J@ie$B zO;v!cGMZw81W4qW88yp?sy;n z;AAtP^xT6oMXn<6-7n++b5)LLfGCG@q61}jSNy2+#cQ0(&IBLp*oM8wS_ZH$@R)Sq?2CmU9wV zNmHZ4Do5)50Pn{Vzn}F1aRg*TE%OV2ZU%Jrd)QcXV%CRDL=7GIpFyPi0s)F;sSeFh z$ci#q?iWXq08}G3C*mGRuJZ^m42_!kniH6Wm%)1!@7?7@mr7oD0)uD1Ms#~c_UCjB za30S*j`ct1Ti6qQwHAC0Uhmaho)-L9dcbe6X9?{oEX#hj?ze&2Yh2^TZv4oEf5W`$ z{FyMc>*p8I+{R!1d`@cdFR+vZ0fjNH;qWHnXW!RLq3CAsv4dQvYM1Zr@93gcM}ws{1XGd$CySL|b8 zwpXuiKtMlwu1BCg*oI%#goqW=f){!?-R{A3 zdmcm8EFLeH;>ED)8pKKXf09(z36IEQ5EqKA%oyevqI2hX8BE;&!TEqsVbB>Zra43nHw#4R- zt%+vCWQCl0c2%$e&Q~HOC}y1h-9R;K{AuYgRbW)JEI>eQ+5B8=!G`?1|LGGNCs z?o4U@hKe-ZFE@i$Oq1Y2ktvu+_8LK{IS&U{q;H&DHl%UH%XyEm$^O22-F|Ko3RJVp zec-zT597XxdPO4wMc-HP4!>3}P$J6iABJD`s`2%^cm@Bcp#;Ex1OBVJXn76r z1&6dl+7A>-3N0VfZZ3QGO(*oJ{=sJ?H6`=`-nEMx(x6No*s5I|PTT3(R`$L#wBq;3 z5IGP0%PPFXrJGM64)R?Qu(=v~#+NzE;7cRZea06eI?!S(IA~T#0o$yHlatqc2ICITtU6wB&4I454t@))Yk> zcg{%)g+u1^Kz<`gFv#sCL1_>mJpxS9lvHv<(~ifw4NrMGBD2s$RWdG6z}H4rAFNt= zj0%o#>m`QCVIe(zDJFF7F)EnZ>Vf}97IUx`mdpxiQr4hIC*Vw0Q7br|f?;+Dzii+C zI+|pf4U~Cu9MJ9L1!h-HU=xY*dazNtDVP}Cjc|RCx!DsVNOINXGMQ)@k?Vhhbx73p zGh_)=^9x7G^_lP$!)vf0Y~~WRkiv2uB?B|JlAy4Dn}*%9JqvIDzGdqcrU)k_Ja|2;REq0ixd_o z)u?l+Quuo-h=>uUiy~kITO{0qvMfRY3;4a{TF$uKiO^5JZJ5*=oY+Z~5{xj~$4ymb zxlqPpZ1f&{g@#;asFJb3Sx!9(Rp1M~oVt`@=_PRA>i`GNy$;`8H#j$Y zbLrctt-dS*Ca8*SvqHvbx3T1Ij5ruXvOIy2fz7Erl^oezKoV8$2c2latDvCSw1VC$ zTJd}8=SAB)&u*_7Oyj{5Aqh8kvPJ%TDcMppph1Q};9mbQ=}=%5`UzoW)(}>q?@M^M zgnugGjS{|1!VL_U{hZ-o6~bnPl!@{VE@gS1&&g7nkP<&)|Go%)j2pol7bLz<#k=}e z4TW2KBDhbL5&6Np7@10WHS-)vx`gV3wMgb)=3!_ySWmO$pVD1Lh(On*gur8!daP8B zkb2BkkGs@kA|AM<4TZuHAN$}QWCj@tT*tj`1dYpEMc4riz1ZDg$wjuCu8u ziJ7~&{ZqzrlcfZAmh{bjTO0Sb-hfSZ1EJ3zca{>*&ze?)(^QVfjvNOAMLF3G+PEXy zIOu_VyJmPb!Js`Pm)~Mfi#3Gc%{Q2=nt--JwrGY(S&o1eWhwGsQHg(IORV%SLInC2 zm?F>sFx1;oPrX2%7#z2s!-m;t)EdPFV+B#h0E3PgfExWvrTN(mhl%C=RKAsA@_1C-W|EY@vw~uM#j#;?f z7U=4R+fb7@_$B8XCh;UR=^M>~3XVH2R%61*>?es}TJTe$LZ;xf9*_do0x>~0mn!|% zNDVnbQa~f2qjrUVAW|3v!ik{gMdpj99GrsEEUMIBv-!39SlWD08+R~DkDYAu;nuTl zdhFEehF6dVOTKLuG!sTK>i9mWLzl#EOe>CpcD=1ANLUs-smRA7fVxbo?0L4WEtk)N zQC)`4;xSk~($vGF9!Jp|q(#)DNg#C;*JLGZC7 zo!s2_khI|;)^5iz9H?fUP$P;tpTyGAbaNx3>P3E_X^stK_Sltiu`RCx;ZC#?dCIH# z%ifoQG#L(TTtO-BDB7#ukG!p~ct%PiQ)N!z>jmBDacq~#R1|BhU|_fuRnjk7*gJ|j zo2lpOD>xE?V@Y#Hme;YkAr-9FN}qFX=Z*u{m``3td{dapU%maYBO;Sr(rVr1d@ZoW zjs2B|^wb<-N&n26`rvAm#y=a=`MqH>c7!gEKt~_VB!yz$0I`meADJr#V@OOhjRO;8 zWVim+Qyw{R8$><16y1=F#`$*ea-|xrpwJHP^ry7m zksz;O9}|O1E&?I2>xS?tGv_>gOU5p3^t*`8K{VV(==B+IYNI=|-<|V{zA$(h8!Uwq zUD}=Nr3+wH>`#~Ad@hVdc4*OT#8^Gn7Hwi{YxE$Qu_?KAlWj9ASiJ=ak*E3!l8}W3V9z|uu%FJ%74h2%Wtk5jO(dTiZSLQ z-CT=+wq{#)xOA<8QNuR6huNl&`6{HUHy9QC;K-*`n=Lbt$N^b}spz`Q zP8>?ld^7T|P_WNBq6PoiP42*v;B3lMEGNkC&0KVc$jM3XMGr_kTO{$MyTDO2qa7u~ zYR4;P@tBHRysZHn-Kh)AOz+F6-O{H`cTiqreC>)lG3ADDl}hA6dW;_!f_|9oW!Y}b z%yWPgF5@+GYkhDu(1JzQ2lJz$@zKx(D?|pijCP5Qz{3_yT6_W*ld;^K%NNX9e6;33 zvQ~K{@R6%)ZUqZP+=(7>Ig7hT#R{~`=n8y{GOAgInKf)d&Z6$0m{~~+<}B(_p^ENN zr*rdy)CD!4pm93`@1x)qEV!mMx$Fbi(47IP#tkn~Z&x}4)dT@w_N+?^R1*q(Iauim zR1*-AVpI^XLs{p5w29K1_)yi`T{3={<`n=FE-rz(Qc2)rQ}R;J3{(>>lIGkMs3smb zOK!8qex@@ZsM865W)`2)!#Y+2WBk&nCax?xHgHonDc1a$4`0Q4dpzF zdFr=Z6-1^k!F)d)oAD!PW08NH3nP$AE@=uAfSZQ!rP4n7Yw&w8Oi4l$=fkVXm-Gf5 z3wf;G)^`SEZ_&nW$v&jzAHweCYyF>^H#)Q1HD4p#R-=;P!c??{9|NP5zN0PPi!dhU zk&1PdXYrCDQeAN|v?iJMD^_!mLDkxNA?loqj6gR{WkX%%k|Py_q&H-=Ppcu;LU^!N zeajGGGtK94 z@&$H-gAbyBIJ?<@Hs+F1!2Y^+SR$KbV*F{g{MoC1kC}`j%nUu7r9$xE_Fab5JlRiB zNn{rDi;--GW-v`=o+Ljt!m^(*PR%?GV*U}xZ!c}i6Z0Q{81#_TdZdGDbHRT2AlW-& z>yi0-L1Tnb6M19no{ZOUrl7bvdz&`)i0*GtOJiKz#7&#J_};-555v3Ur4{>k{6ud! z^3k-d5C7qrI_C~JxnWA-_Gx)b+)Q*fe9uus2N+%###|1no9-oQLD2NVDOv4~i0-Q~ zukO-)8|!`8Q7H1r*QEP)@Bbm*aMV{X-o1Y~f{-_X;(d+>zHj*U4fmyM3;zj`<;BgI zTXv+?3~~mFn;b<+Lu=riZtmGgf(tssw-J1cr+&Tt>4V1oPdO7&Y9VQhYXiAsDIavQyUX)hSNzMZdCx1LAu9wRAq+F z#$=g7t1p&G2xxUa;}lx0MYAKHlydJT$vR=Zd?J>WG1EE{n=<#QrXoBKIBrTd;SeA@vH_~oIU$NsRdksWt}HvPNxc?3IG zKQj;SUx1WA@peb)#hEyRx|`>f)?zrjMqzL<4+iH^{!|N8*x&!H(u-dLnmSrD>$%Mz z?%cLJi|XJeNL%Bt84IUy_+BN{z{TI^t^b9c`R08e;wI!#*yf{$cXS+iOI!1rUa&E6 z^pZJ!UkY_;j@I)~@CDjaHCiQ{fK;%hhQDUlM}guRaMSPOy}Xn8s`#UgtV1u;tMEuMeCzS>f=%J!HZVH$hPYin zn9+CzDPjYEz=)9w^xYj9!-;=?bD$II(B&w*-nWkx)%%+G03lFd<%IO3FOdHnd4F1$ zu%;z&$k>cSt0@He$fTjyVcf zmN#WLY9{7Dfs>7(BU~Cl*q2;2t*-hHKfG{3LEEkf9EoISmHRIW)_^G+*~S>R7FvcL zUxDdQhi0zFZ=L&f=hXVV*OP$ed9S-$&o_Lj2DeDmxx)@5gqctj23S+Oa@|rx|HK;f zta81u+3@cpJK1CSYIR>@c_)y=QR2lIGVl_ARKerjaN$tr-jRe2(mRs$IXm1}^Xx8L z{?Ea~B^e6*6AJK5 z=S|WN9@&|_LmRha19)9m#tw6~Q%X|&hhv*wr8n7QyI00`myB(d8r!D$u}x1hz_!5_ z(_g?)>p4l+jPbwd^f&H*{R|-AUm%|bQnes|If8ZWZG`+bf&8|w33)oIyU#h?zrFY> z18(bJh@@|bb#9Avu5nua2Gz50`FkQu_k&n=8>t>+rF1RzMLh?!3oL3xN!r5MSV|MV zV)&i`yFJ^4w7|4f|Iy%A#k-C9@)08P9t3XW42tCN*{+!J9GTXKVGlO6%A7ZvtXNiC zhN%!%uTmLOO!+YYG4kpI3Wgl^Z74z+FIa?nf|* ze7hNG@sdQQFG6hJt?0b3(PHKZ7S&61HFP*O3_8ai%gU~8rt`QfCg!L3k|`mJEcqSo$Oyg+Lz zx*Wt1xuKE zdwDJKT}az};YX7nx&QPzg+^az&UqOIz85}`%x^eq zmEUBXD)T022a$h6&gglai)>A8cW^842U;<_Ih6cB-vit{7`L8ge9QT6aIf~%7WnXm z@5jyVG5$6fp{3t~A}h{gA$4*38eA+N#qVDX3W5cPU(8~HN0wdr0rxGXxT{)InCTne z=<0fFayw#t?SbMJN6GDnv|9lD{=Oz=uVQv3Xl(nnkIV>{_GKaSQ3zn#fI}s3O~x^; z6d!*0c}f8eeNJkCT8^UN+y%}o*rl$57XM38-=enuEc_=2 zm{n=ELfHMOztvrbo_q^n8f-!qivyhxlA>gW`uZfl#1ipE<_c!O5JNpl<49vXJX9Dl zEMvex^v|HLL?E{ut=}_E$qTbmWlCcv=5<@yeuJrRaIEDt{7{T3l{1qWjIb8KWA?33 z@Sdlt1Hun(g%M3r+3FP?e^+xd-!LzcHOO4SPa;QwqsR|_DsiJ>4a*`zdtK+g)JClBvX(i5jR>9T;`%3 zvpNQ^?)D5lP?rv`59YC0{I!m=EEcKAS@ft;L7>8*Sw({;!JgTFKT^odh)qgIslHN4 zu3NC2p-Z7E9mK4*p+Zm#GAmm_+@E4(jDlLDa8=|fC_eGv$%Vyd^|<6av4$7|d`0H< zj>qnMqy#O4ePvW|43#D!)>&V{qtGP@RjiP^P^X4fj1K##(yL3gt&6lZqL6)?i= zS{P?`EmSQwu=#aOJ8Z9t2?Uq4(Y(*CSB#feqKCZZGcXfArOV8jNA-$1lFHE*Lv4Az zZ>^xrc~D2<^y%Q?QplDAHLd6B?M4L)16#|Rcfw|iD`7DkQk9uCPxo&$Dx@BUt8i-& z@@LfP{w4Lk^-}u7kn`+I$T*eF-ur+@Rh{|cGnoMf9la9_ z7&X>d(>4gT#AaI}Q4?fBumsQ=8(4zw)>^aLe$i$iw&b6afw^36j9XCJ(#r1IuDhiR zT8O~{W&$MvsV2Y|qoM>voH$VfS`xq}zt87A_f95&w(EDFZlC9u=gHiA&pr42dCxiT zzw@5=y)4p2QZv5S2t1`VZX9_p7H$FZ$1cl}2~c@auzzH=2f1ASnpkJh-&_GbfNROM zPzlV^>b^V*b7AYw%{QY}+O&w7;^1aOWZ(P2V@~G*vL&&Lkv~bN!kI*(d>4VWqZ+?{?u!NAf-4%- z@p9~<-~jYoFkr?Jk`H!aEu-WWuR5?>jGH#2s0mXt1*fU!?FBE?v1rT*ZQd@}B72{K zn$alQqNhBg?}SJVUDuMD+RC;Xv}XyBCE8uT5X4~6zY(wpJSUM`lku#&2{bU^HFE2R zv;?h|uvK2KX3oyqV={Bzmzk3?$$$nAa%9S*x_6SA)`lA*JLdZMvR->izb~xsGl6je zDB#v+>BZa-QE6T&NqS z$colh90QpJjp2ueU||s>15wcH=cp-$o;-*ega8Sk)d_grFUi zoeYyLvXt+X*`mF3&?V`h#cTz^#@ZD03nYwt&e87)BA?vqUxxx5v6;h(;hrHHL}EyN z*)aXyx;QcHB*Zp+T{V`L@n8UqKx(4u@XryaroWUpod!}mn>b-I*gC;Y_W>+6eQHXe zPr(0bU;v=EhyU{MXQpj5N%bhlGO)t;o! zY=?FVi}WkdPE9b1z@v-CAKIxJwkSbAb#Nc_Q=LQlsf`o-ZK9vTgsF!Jhw|GDVG*gN z>g#(Y=ae@4RNpH+w>Zrv8z|mL3lGtwxPHnT*F7far}h{_`l;o>W>7!o&kp>q`v6;3 z41(x2vLBb`$JK%dsTS22zc$0k!OO&S5@-hT#(c=B&_d-+ddGhUY3?zGBTZqZT!FShU@(|NOp^HCB^yC zM>hL!68%wMGM`z%{*%WS_TOfozbKmIr_7~Eb;u#&Yfn(_AiloDy971Yv3to&BXe%Z z&U}OV44JQEn#%k|)Dqo{%pi@opat^H-t$!OE2gP$8ZdjKA-jUxIJ5!Sj_ooZq7UB7qRzu((#elEI z=uTjZ);uo3Lae|IPP}HnsxR2gOE+GlQyXB*gb&QyU=}Fp2<`=ctVPkC?o&xv!l#lP zKK#1*$@JQtj$X*aqPDMo9jFfch03UxpGt~n1LuW3&+Cm!ynC5=K=uvFUv}ps9mxA- zC|C;1GmUv4=Ug6mrXbeaz}C9kSYMme*CzGlpQk=6Bd`kUv$CO7P+>21t=-=yF~dGb zQM9|5yO=wT%2XnD6T^ZjK;Gdih@ZggcV{>puUD>BZ=?3xWb5q=yhW}zN}FE)-r6@x zo1;rmG~`x#9=p!ptS#*({GiY&O4s39<)EGq4!ldx#|ViYya?HWQ!hO4B+*tJ!q*mp zur{|4q5~Fq!br7)Ra#~ZgiXm zZCulw-ljFmK9`y&i$0Kf@?Er=g#Xw7$SHiDDM|{YdbLM-)gH^TKB@TRPe3mO5Iyoq zF8~p&OamK6!yxPl2P@o;swLErA|R0;vkp6c>*8)?k-?Z$llxLqV2-imCAZ%HlRl{1 zAckPa>&*ClVCaKqJk?iF7#U{?Bb`R&My+wnsN2^%9n)iDb4u4GiXj_fZw6Z{^d*nO z`Mp0qr_f!!rb%Y~uOPh3d5R`(d0yjBQDiOjHN1s}kZ_)WTWZ~WP7m{Yzd%!*WfAk&7oxQd2IIQ zn4F7btQ+Pg5<)UmB2d^N8CO2@5*s`Gxiv2pINVX%%}!@Emu}}rSL1&&{%7O=F8nJ7 zTKxjQTflt*ZvfmpH-#`r652AJMv*Se)vl}6eu}-AW!NXhAr_xQ3pYqXIH-GFUW&Ht z5lQ!qT)f06OhxBii+>QTNV{k8_ktDa_bmQyup(pB;(rKMWI7lBeXwGpb8)dzn2T(q z7tah<8KTd?Y1(rh?YTS{2KSh^JF%&fwHKSYHvj#!v;0bU zLjK(#8b1Ea$%s>%b_o7o5gg|(mh3!T&~d7xABg#Ys~8xw2bl6+eP!XV(5#?83dDId z*nbOZ3_Kq6w_gYy`G_z|Lf>v&4IpZvG_2L2f6LX_wjaS1nDX4%jCG-fjsVHm`Zsux z2ndc~B5VzAbbOUBe@RiChmvGOP-1Y$G@+?BzY&k823+P0O~ z^AS$0m!mY?VZ_2IqiV%kZTzdtS6nQK#XVtf5*>qTAwL;Sf4fWO-e6Ia7Ggvl+cj8% zd}6~lJ#qfiyMlkeMRBZ&9iQLa7y*!=`y#G|S9Eyroio7AI}0*Bgbcv7a@-?_2pIrr zvR-)*F)IF)2$e?;6Dm;)DkX#p0xTpzrI%27fZzy;>+sAd;>&0POW)!y}vWrN5b?-b`}A=qir#Asj~b z?a&h3f8tLNS?}RdX*S9f z3iL1_*~&@xVE#a@r(Q-d zYuuR1tWyFh+M}||+QMokz^1HmrBB`z;|=x@P(sfH4vR|Gi`%F04fY1`W{)Zxt zmHnY}AF`^lnU4feVjN8AYct4{*ARdT>IbUJQ!!KjwC(;$vF=!2RJb&0M2kq zR&A@S!9&YePG({_IaZ;HFTdRd11A(ak{=?nfqBR6Zne;)D9l-)&W_Vggm4Px4@2ZBNOopUmU6-Zf}=n6s1W+)efV@ z>arBiP($Hb*-YDtXOKaU^Hu$H)I_Pnza)oz)@S;wE^KF>j^52CSYEx)Ua#@`p(ub2 zE#ke2lBm>&ZBx5AREqN%syit|6*E6G56kI|=X@7R0lQZ5FA2;5>4IH=A{GlEnZiaM zAM$znoOixFMENMm$4@fve0iyS#7{Ese0k}7#7{Ese0iCC#7}Zw=K1YYf<5UVJvwbR zeP-dGvi8#Uf7WhVeio&e5B@253XdmXu!RlYTZ7Fmn3BzI5nd*(5K%s{t$-7p&=S3* zJvsuTiI9Cc{x0p&Qyf?h2aJ3@*k;E`5onkyyPN}vHyY^CJGAvh2c4%}FbgS)qM1i%Dn{ISVc z(ueyWc5^vr@5BqFE%-e^;O~FK-ya+K`qN)Palsw%cCMDY)y?ztkNiFAiY)pOS~i27Ys1ZL z7z`i%?Pb1&l%uE>)%*T|J?lauTg-01jp`5cJG6`6&BYeZ{N1>QzbsuWVWZJTU&B~= zUeJzbK=Q7JzmwFVA|N((Fv=iUt2r zz(za>Ea>?Vv;}EGPWM62gBeaNxen|8mYg>OyWsvlEf9$>?6dL713K(Fi<&ID?_byI z-@)l_vHWp;K$}Y3uP*KCLcQXUyna+Yb*W2_x=6X(h~w#s#1TWRfjYi%nAp8QZ=?&< z6<|9{%>Ppa-$Mm%T?PMRE9`kbM-Ko;A?(gYfo25rxu|@UD)hH_Z$3kY8(S%+4m);u zuWy3Es`;!+++aS-M8s1kt*ODU;{|m;&6Wxi+XIj){bY&{^!F%qAbBbBK!Ba z)R_3LwFLi!iOMC&%pT*wfotcnAcqB4xX-lwz?XYw&CRbycoM?({V|x+M1H}X(-1uULACq0y|K~3)7oz}oNwBPXrp;I9!5JMvid(VYg}OMH?v*O zIzzi2c27DP^VXhXKN<&lHYz-6pd~LKDQxAN_+qE@*$Gz`&}VuKop5P&NALk=S;WmN z#G1Uo5jM(xUl*YfA^%$IB5vzevb`=oF;stt<(HCFe(Uzr^NY4u<+pBC{vZrV5pIlhjbau1(;$t@*?+kzvJa9^|+sq2S<|n*&Gm&5Y%l zPz<^~tQaVF?Cxr06bKE8MKrU5D|P ze!+e0(0sM|T`S&((zg(Hb0#hy6F$)VK91R)#2G+@@hdyYvs%WMtX_aZuWU0`WDzK| z!1vw^m6G-(c#9f>9Aus9z=x1M+@9ge#p#%nEs%o$f!_z(D3TqFd?z|u4!ZyW_}orX zN*I`Xj9XKU+tZ>WV13Oe(C`y)IakSWGsF2XqO8PyBQ%}vhJ zgAM=6YUgK=SEo)KiXECvL(9bTH6Sn^X&`g{O663vT?iwKCubke^7vm|*nc7?VYz{m z#|0y%%7dH~;KY)_Cl;m}bJC+9!q|{ALgvDNQPkxsYLb&y2VFcbg!5)?TK(sswz4Cy zC`F?^zf%l}!upWAtho*la!pOSf7e9BNi6EcrexR;s7*nH$`x>W7f1a^A$A%ycVL(h z=rcZl;3?B_Z64Gu(*!jLg~- z+p!`-S8=`tzylvOw@e!SFJcS?Dw$v}b#lA2eDu_gcWaNZ~&pHFWR{hI1;){FX|FH>IJ<|6oVrOeJ z+JdKU!7|xA6^T4b3B}BFDYYH%0%v|pdv027QhcAm?*GXaXZhc41C$*5j)i))RokIj zGRo_{*xF(@8_z5nUC{A6A+;|h4j|r`pKkCizK(Gqfa{;JRaXbgXn4w}>k?a8! z%673o<}^=9>__N;YVzU{Xl~4lp9F9a(t0w^{ZPVsq6I}8@VyAk#=7?|8a=(^gW7kb z?vHqnxR3%^btIgs{-npM!XI?wCvI9CKO5bT@SuNDvO2 zpEEn+IpM$J6?;C$?W=o?2Q!U)sk;EGur8>}fl{Md-RC)1wq@Rq-=!1r%VV8wSPYD+ zSCYmJFLKcks2ZLH8XFv=w=n*E>m`s&AD8^<+ijCr!sFR20cy@41Aw$H2N!-6@hSO$ z6HzFoW*bU@DsIr1Sde_Cir6+;3d&Ul)ovI3gI3h~kMdUG7wmSS0EuDWdP&hiyQA{CYRwjl|TYszDbpc}K8n@3uQ0|f1vK@R^+2h*s#7&sGgYRI{ zE+1EO#1&5Qbg$z(KI2HamGl!P756S56F+5MwwJUIdQH+kd=-0G-XlLxF^qb4kZIrH z^twG8bQ2FHRsl(>%vd2`{xpS}7tmCDy{h?E+p_{?+B|I? zj>HxpG&cMnoM(V?)Y$L?xoK|ouf`gIfpv}f47b3jQk~(3p2DbE%p5QRD&8WVD--mo zP}S#MEoU%y$jw?z0l8UY*&RUZ&r+$}ui-Ms;ZHd%tk52l^Dz52TDF^*1!mrb*yrqa zq9^1(ySS<94r5Yv`?TkJp)*+qNt)w>Z33;)?Gs(Xj^%D&*bl{MGjt4a>xq-2M+wJR zN}2dB$=cg@Tm^z};a-|-plAzV1|`HI0{ zm3y`4(vbI6;r}OKfj;Lh#4**{6U>d$R8iQa*<-G}ghqlnuV}MWHt0KYUa7hYgrAKr z>I|nPPeC|r@nAc;Xv+xZj$t>tcX{zXzD~))S|0?J1vaScx=>ru2UG;EMK-T!qk$c* zJTN#^I@SM9-aRevo+3x&UyGd=!@ov0RMsKiI&A)G_1~0yDEgV}xCO9BBby1SuLt zb>=glE5Qr`OJP1UsZj24njY#p`!xN3AanGZTN2b+oGbQuuwYMozp2xhiV@#$BpDC6 z!Ia+Lf3>S}|NXCCxIAr2xU?&D^5L=YO9m(!`tvZX#3s^gssFsa~a1`&T zaeJy>+~X|nE!!1FEv_Qiz4Wp^oclDMZNZm3ulLU^0^3@#A7HYo_Tcp6YeG5?1W(_x z?G}8Y@6%?#sXgbNi+w@tX5sF(ZJZMmAbgeX(Volx0Tk5Emt28^!P8C|^p2@zud&v$ zm)Rx+s&~G6|K1DlA7oFKr`!-O?#g3Bi#yGgNk8}rI?+g*!((FKA747!#d1oR$e5-Wj^!q<-GZ*HZtFj zo1%UTQRp4P!yg+fJPpVVHz2N=4G(b1~e3*|g zcCbujwqTmXt9i}TU*}_A6j3;@fD-~Y0xn{tm^W#$Kc8Yd=!1A zOxt>NYEH|N7~Q^$gVk$EWeex4XISd!g?HQcJ$m6i_IGaa-uoeD4gA+l(VFT(sh z{Y?7ynlppiDnwo0tKW&emM-I;Z~ZSWSMRN0>b1s~fq!pxRd#9XD?8P$*Nb>J&xLpE zi`t#1UXT@5iRG31L*RUsWjj#xJm(p0ed&HDvb(1``(X)p5JAxk(qk957AV7vf^?3G zxs=_aG0zVV!IpYy2F5_8uR)+nHC5d;kY%DPZ-TLpaA17jx-`?u*}9a>kxCW(~)x+}Eq?DaAfA8S5Wz`{&6=s)N`*?*KgwpqWz%Sj(K>kp3OO;7F4H82$c zdWavV_nNhN$P1GPvvz^pG@&fBaEV^D&a7FBQb2Lzwi7$pkOcW3nn1(9WIi)EvJGObZlZos^P5g}LN^Rg04 zJ7brC--wN&e&*ibWJlmQ_CyA9_EkZEZU@V2!m6qzItGFgr1MDkRl(!f-`}rapkM6t z@8BL+YkF`nFR(J`-;aaE&B2{OkIgEqtQPuv)D!&PmYU%AnrdMAAqV?5$e#Pvcmr}} z%Y&-DHvc`7NBXNWY0Z|CE%3%lahS{Ma5xMMg}H3Y7~b@l%MMQ9jSX+BXV`Nx3vV*> z(xr>Bi{kVFj@51r?X4JnZ!pJEeuA4sU{LEfplnw?2_l>oMCtMiwAVrt2vNbA$U0@} zLH=n?y9z0ltdp%`OqJ;isL`m-(-9DD8*v_du9%A+fFe0QST#sJ|9D}vY=45}d;Xut z3w^i;2Kt{kTD600OW?=$fW2QM14gBp7Mf=d%S>z6m3hzNSA#u>pKIhp8Pf|gt-n;B zLqnsgubLGlXZcU1X>s&RQ0rF1WNsz+!RD*|J(w`JfRW58$*w*G5e^nbzeN>Df!_tn zS6Uq*DDhj36(cDb8!JarFb+mW1^0px-wl5wz52@hJFs5yY7cX48QIPpEu(_3Ajd0L z>Ra+l)a#?_HL?A$*YnlukJW3+TEkx7jn|m2!TwY&6aY{-7jKMl&h`X%crDJU7eZe2 zonM1N#E#uGn;)v}@#5&5ke3D2sOH0!aDHZ_-xch?`}w<3pH>9_O`bDY8V_eXwa^ME z1cRHOLWSu2e^3R9t=G-z@*LXE=h~Hc&_ix~LSgDvJI`8`=R-W}FPqB*X@-2rW$?r; zB7K~S?&4IKo@qQobR09+4EVp~H5g&y+aH_i^!0T?L5lrm8C?KzMPO=fxc3x>%q zMqfCAZ{?PC-}dV8lHgI3rOt$jteL0o+(X5E_ynLDqR&-0>c`umH@m*VH+0Op+(G52 z7NV}$2=Tn2D>N|7ZB5n_TaJ&n^V1vjHE#AV>BQ!7fKYf(DIO+%hqMF_<% zuLkct;u92!gMu;Dn?#YHJ zL+#Dc1#w!VwOPqNo!#4LPZOf2Xe#jaUNV*qS!%9%*aA`wxAE8mTzv3lUMn}y@Z0X? zzx@F-mrt`$;l}sm8?#ncGV?`BFqDWfBm*q#&MTPVr(kw0WY-e?GH63=Bov?TWi{9C zAkh-KW-blRgg}VtU@pBI0wLRIHvWKV>cGttSOd|NuVRCB>FQ6gX z{`feCQB8D9bUX~pTX61r$bs=GYp&tQgnE%X(tnj6>cI{D!jLd2N~T*>&5e}!dLAM( zj{wscss+H0=Bhk?2*vMEjydqik0D0vD7J5~hBA;%vbd6la*i9%H;E+c6j~Q2P?Gtx z5GY9K2V<8j0%iS@K6Tsl$qe1iRs;3JgC+2jN$RMO_%(EHkwAdr1V=UI(+JKzge(M- zWa?8WkDQ3hBWgC=BFPIl9yCNk5=h2Q5(HV9pF}dsnd8rrjL#w05R}(u63Seiu8@qD z+#AA_T@so`NXWe*lfV_4BPpB^hOjo5gzk_O@-Pye9$YL5WWtcYr%*th+s&$M^k541 zCyMyqmjy-CU4e!fG7$^ad<2bpbS;oyw}kw$X_SKXpQBME9EmhaFqlQ7h{O`d-=bH{ zqHiT?QM4;Qzb$;YLeZ-gLa&BVDma5X19=nk%91yyK;A42ZXd{LfxP*17O9tZsX27$ zt@!v3qd62fx2NlpnN%jA2YBv2O8LSYTxu;dl z;aV1~Kf`h#8lBa=jlxxIGNeCa6Y;CjcfCKYJwr6No952etZ+ImH!H+meSQARIX zYi#8ra`qXUxO9?t8b4?EOoP%+^m!s0+0p7xK5l$7T|W>RxXRg*{1P^2v5I8l=D^tC z&M(u+o>upBl6md>vUG7383AEF+l;Mj7y@Z7dklLvOo1`R6aOOj^ASKa6V4UJA~r|~ zuHQF__Hq3su|D!50O&t<-K)(6*?656Qwz4!Kq4c0)kG&;SCRX{ z_PMY>%#$T~<~2iS0X?Ohv?X;CLJZ1`;GPNl&$fPKB6h|tibb1Ek1+|#cB8_5|H-Re z3w`&uV2cKuBJN2TAy4FktAc$_j2(9*qtB0#gM=6G9Ogu+#07nO5zH%k%sQvz5zu(3 zWv{aNCmPy+4W+`$+O^m>=sya3SG_U{0|wucuXg8yzRDJm2Pe_ApF_UCm<%Mhc`!97 zq@%_{Rpa*VOPCvq6uO1%B8M}>!%cCmah6lqPRXvf_8rpcsjmjoYPSZ-gC5GJ^@pI3 zr2atW+#i!g_^d0%+SVEilGsgZ!0EPARSo_d5dVYZ!=Y|ylNR~ldQoe<8H#+f{H6=L z%YZ}it%My5!Xx_G-#(_kEkYi*DnDtc1yEK9KDOF%ft0mq1cWoR!!5g{$3^m0An+q! z_uE(mC~TxE?1FPDOjm`4!kD639 z1;Ixz%c6{lJdWr>WI{Vfvz>|QB`mh}k1(V#8^4YD^gCwnZoyA*@blFLTH^wbn41nS z?epiBhWZ`R3#7F7q_mf7QJM#-vBmLH1i*2*_n?Nl2dAQ07gS%%hAAM$+q{METi=k< z?q%D2EN%SooKo*UOU|v5^M2+eHfhirW%xpe&Y24Ti2MZ|XF{(BUbki&SD*v?GiLe7 zanQvHJFcd~$xF}*Y-%F19+AkL?reQ?g8pc(E(nrEVr$}Y(czq?4(G9(tEj^% zfDWfB+gwz#Q$#h#3s@2G&mH@cLL1Y88*(bLt0sy;g3{bHp{3v#R>}t_<=0t$z|!Dc zfz5R*4QJ3`+DPOA)%QfGlk(j_P?F!6k*kZuuC0es+zv7jY)(Oh0WR#vsFyM}KfoE( znqo;&n;E4`-zp?n=PO-gq~IW}3b4Fa{@(KkMWM>S3{#Zxco9g}k9VA^9cTlDw%x;_ z^6AGTr;@Cc>ye_(J`Qu3OCXd9pv<4#1-Nu~;!RMhN|N<+>UV@o>??{t;bgX?eB=WL z<4%!u496y3g+Ddw*yu#!mMMa+m$Y@S#uLw%DC!6tXTr)~Nd^g@i}62 zN|A(Aj^?5c-H&czat!U4+`1D9*pLz~K~yhsX`UEs!eJ^S;)*$?wj22+3OJjN`qE~-9PK?=-W-n~*OOCwz_C18a+o1@r-YYsBOjS?^g`yqr;GDDbw znlrFTX(lBQ$qAbfK+kb$NVuoZA`M+ht~Jd9jCJ8YLg1Zq<)Kv~53Le;Nc<+Ki4)C* zz6 zhd(0jYEK<-MUJ=>!{vM>c~c5rI{PmXPFkt4U<6>ygGWYc5nT_ZzzQE0D9;n|k3ana zejQhA#iCtz;WrbpzZ{ zxMalucNBE%q7sd|v2>k-Qv}$@a;+G94<3?t>Ki3hSIB&Tib1S!TS%&mScc}tjaS@wo#r0^1JOzLE5h>9cn!IkIATbKx+Aa6k* zXb5(ryp=d#RwHVWHDAsvb`krC*!4*8H*6ThE|I=O>|%37?3zkID(x6dBjzVNc=T0d%xR1!IzMY)wN<7eAz&*2g{)W#z;rZ1!Ot)`OB3{e zY+r)@FAa~aGHxu3`agcFR)gsO*g-?lEb9N*QR@HroznlYK*Q%6r!;M%`C}%NnmEuNgTZn1{w5QouK;rg!BI}fAR#Y;OXL8 z1hzOcq+d2hI{QIQ-8}va>hc>f48c~uBv278^Ch_ z>@AHfsfXp@XCA&Sp<|uS5lb#Yb_jG0y90>$I~_?$OYY}y`6c*u1>nR{Uhn1WOnI0a zehm*eh{uy?HAm#WBofQ9a=wcMb-TI+JUm+Z8uGpBJUJl%!)y7d1=T~Uyekr;zlpdg z7xxeBrE^??@!!Ll%84kWB_gH^Hmzr&sYbmN3+rt>1Rs|N-;aNxu0Q*gy8hdLsq3#B z)%CaAaD_lRF>yT6E}p8}6T28DC?oOohnO3`FPYPL5U}KB2*h9r5lI2wqxF6FHt4UJ zxxSo%sxKN#9{bpw=bV!JSb5C6752jT?Al#RHlvtdqX2?;cWiS`9}ZaJ^W0iv$rB&P z;8W4ZHkY*8a|`q7TX)v>)W8e_@0PnS<24y!hN+FkU8n|kgoQm{yvtnPr3m=78tHjA zrUGvx{#d;O-_i5#^Qj=Rv5SO_+jpe4g^#AmywQIJ1j)j&_y#GS>)$L)>NusXUlDp* z?BB1&Yu_rqMk8@-FInz!3MM7+e=&?9whJJ^fxi;;P!)uOASPS6Xf)nLx}g}6t#1pz zuUK|B`sP}(l$UtBsZR;KrCRnpAEGWa4|Pk^KBaWnb)ocx^^5W$0)2#JIn`&0u! z#^>WwpPMV;TFk+c-7^1hLeE#swNu>1ADs6qDF$9D!GCgblt_f<$!vHpU5GlY?^^`E z@$XrreAN2}oPgtSK90=B<01Yx;BovEA$k@(4qA!B;L&O&4ui+DR^l*t{2YmYgYZZJ zdBhZfGfdzai)M2UL|=jbacr@1X{)VqDjA{?mC6N~kos$t%4wRAx=N*TajDd`m<7>l zq_!^gpf>)sE+t;%AJ0MXAYOd_+w?e1(PNlpF24XK{pH`S+ogqS@Wp2Q4_CV`G~5j!*e8v(=N?K54!9n=8vb_oAP2nRzHl?I{!?b!&F1Vu zj9*00aSoaJ;S#v`YbSy0RcAVODExGzut?o4`rA2w|rAwR9=8VC8 z?*@-Joh>}1soeFpTTKCAyBC6$H5REGjFh%m7HCMY; z>REGjA5vSF#pmj>_*^BsIf3kE!h9X#H$7-Y^hVH)zlh&V+w5bf{GPsUZn6g3$gZMm z9?(NawBR(BkH1&k)HZh?LlX46W}#PyLRbZ= z7_Ra4R8Z^hp}#&Fv*BZy_PU<|0|QOBk&7Fz{-~e;fMNJs;w#8(MloQ~#Q}e? zGSv|nEt*QbC59tcso{t`?SnCi*SsSMD+u_(oHlZB9}f6n^`tPqRxskhag|{Iu zy%a3@3(UN?BmM3?-5-V*!BoDe!#)mASol*+cMYuMbbp<4PvFLiiROT_p+4@vsEjO1 zwRkgDcE>o>suy>%aa#S)@LmqO_~?>Pt6z>n;iBKj^H~1GqVQPU3gt*5|0*5P`}g(h zC-$9&SH4as#<$&Y<6w)=xD4AOX3B+}Fq~}d5S@^sJvZ&bB-1+?$3LbNc`DuTD|v~t z)#fk#p7E^(Ijxl^;r+7R#Ul#ZQ#q5We`f^3@MN+<4}_J|XuWp?^U!Cq zzpf7fY?ffUP&C`4`*Aj9MK{j?So{;bTzBGy*eTb+amuU+#;Se`G9Z>^1g_^-@nZy} znzg$R(G6G9L%M%0*$vWu_=H=7*AS9db8=X|<6;-0@H#xBkO7!3mo@);KBZT&M}wnv z)Q9sz@ZSy3Num^X-;!Gvv$cx2pSj|rT2By<1xg^%BSg~ zk%vM%jkE^i$AbHEo8TZ95P)BpBFb)plW;XG`2tQS9_M@L3*3*o+=lM1$N78_Cf-N3 zBJ@r8d$}oULQmnw?$7au`LJdr@50=0Q>Wk?=f^C5j`D?YaTG3!qr%x?SCU_qL=rgP zB5-uq;Q-09AmA#6DR`3K1=ew`2=byUu_DjrcM}-X-@^WdT_MLvQ6*j=jA>AyJw7ZC zn2P0*1Sl~gp*$oi_VwGJRNfJc^6>J2%~&4E1j@q&y`;R5!1szyeADuohw3@pL~}(%5WEN{Gt`K_wrEn2^vv;A7RlV6TD~ z>mt1B)l`|!DFEOBl*+$qR9jjNqGeRB(*ty>AqS@Y@G{b=7q3AO4!szj={F(>!A8VQ z&_W-B!4FohaXjqS2V!M(uDb|SWeuX;S+0K-H|dcz{o+N?8w6HQ39JnyxB45b^#ez+ zl^bGT=C{zS<2=C~;g5~d)q2Wml+`+|{$u7F%I;qaEM=57+@hB@Oew9Y96RV=VU(_z zQW~zrvGom3?NJZfq)-y!{f}S$q z<;c6uYL1T}=#2gypl42p$AGTjP0ng~?8N|_O!Tv2&o>zzR)ZDm#X*X6!EQelKt?}+ z8(7@QRE5I`cnd0xz|cHBC$+j2Q9JL|vn!;9*usX-^GC_n;VmqTwECa2!6&hvQKF4c zZO+Fc(G$GqBhh2eNhOIMyzuP2B+=bNscTVR^i@2ck3<76r{_%49;H7Q3#8Q-Y$Jl~ zJ_G>=j)r?}cz{?4qKBvP3> zY~~7cu6dpp_{7N!^t?a^vNk=#d#qu;$Hl-Cy2mG6_>}N%0EZ)=%0cYy+wpn#xA8;8 zA{hzcF;pNQGkgV317PFKYlioKQSQJ-k7AnQ$L>Hkqt9P}xg?XvT-wE4Vu>jE!Ht@Y z+nJ^;5g%s$<;XwWp8&-zoF6%#1M1cSU_P{d8P9d;1rv>B>*OZeShhiKCY#es^nyvo zbePXf&(xPrL>0!e9e8KV&Ws!$L0bjYT6Z-Hir&rE%D3_!KJyj7aC$U$dBMbPsI5-g zP|dT?kL_V0o7?&Oll}M&-!d4UJ{X=lXw>pmYo50jf30~Qb#cqZ!C#}6U$y29OJWhj zl3JH;VBhf9y0l5%;BI65t~q|UC4ScyzuOVNYmeXUiQjd`@Ak*16 zZ~U$&e%Bwr`zU@#y$kyd5LAOL%(;Z#UGS3O~dM7mw_)L=c0lBbo{(}nW1+IrIDiOYrGCCk%V>**4Cddhkl zD^E}3De~^65L@+zb-0h8kF@(c=Yhx(ud#4pD497$y=`w=_Oz%g-l&5smVyK zk@j_s9o?=wrD-f&&c`hGdz-tG=T(bV8+A55)$@Cz{ufmknvN7wl{QF+AU+>L=d>_ZIi!qV8+ z4f!T=#Jzm}^}cXPsd~mka=2tc{9#PE!1>4?LIztTTMIZkw{ zXxw&>@!)+%Q`tj6soBrrWZm-lH%$u9`xuw3@Vr0aa(#H-04`q*&l@!6-WPn!6+GiA zABU7{!k6RslJGnyF0Syrq}Zj)=edzMZv@lkjYQJ&d85MfT*htpP1SF^4+B{~PHU|5 zePKSd71Nx#dj35k({f8p$;H&~TGJ_;exVWaXq=v7RAjnlPYSj`rQ{2|XXH(+N&lGI zVAzM)`jlKX1&!q35A$GkSOVN+_~81;Scp^c2Qe)W5|{odAM_Xxdl`|+CobKz+3-pU z*S7~T>&Ex#m7T#spEm0ioP@@CyF8p1>M`hLevgr#PDe=jDexBnKS=)eSP7kvq|y0E zp0AH0apwoyzzz*+vjd%d-2Yf#c@PJ7Bk#DKtp>as*z#3w1}&sW(cmk@Re3bJ)CH=w z-8TzHfjEnphk9_+o5w)by)fRBn8l6AE}ZJ=y2A_hUIhnjV4ldWME!l3hcZd_!R(3aT^=TQfOCoY6Wzi5Z2V7l8_84krjXOV75^s>{kBd&|Zr};`+}to+Z4D=Y>i7X#$f} zFlao&SD(ftJ#sFS^vJnPQtbw`mVX@3Fxk5qx?C7zf_6heIIJU$BB1JOwu9!MH=S69IB#uW^_E31)irArBr5MPr&rL z=u4<^nhT1hE?I@#OIKlUM#vO7xa z?BGrxF^Rt?56#YL4IHqoeTT0vdw!#TF!Phi>?SqC_+=W1l89AW~DheZcX zZzOsLz8(6IwbVlYhHvn(k`&Zu#8Ex`;2L}|1d?gCJ`3=GKU)F=qm~bk7jC$_({J<1 zO}c(tiqWu<)AzPiqoGM|(u{^Ja+7W}G|Nqf(a_18$1+%d%>!(C?IhLy=-*@iFt{V` zX4Zzk7qbDD41Qs1GK~k_!K%9*yks_WsZ!qEWm3+rEn_Xy`}4A-#!kaHhAC28wV z>#F(m5OP$hHKow@}m4=FGiD#+-*jVllk(dt9E zgZ*!PC98`=M_;$4wAj(xpJO3(7oQ zjaxxB7$v=6a`$4SS<3?J4afv5`%0*p%C%tAT6}DILMYuHY~t`cVjnQ_ip{?ue=Acd z*{cf?o`V@=y(s<$MQS`7H{B@o8gnvWFFnd)T7kLqp&pA}Eo&hbQ|yn`o|+p51Mf_o zp3`6bNBy-Kh<3d@YtT%)KK8y*m>t?xz6FMQ+rTvr#;#Rg|0ce?>(~fKZSH2g9awaD zdd`{Z6Gp{k)4RDK=R{S|DDh+s#@@B@*)&GotA<6(2hH77K`RcQj-g0Do50ZO^lXxX z-39*^&@^7*`1FHjxXXZg5gP&yPts}i zU@Ae)qhKlFvd6^;Ghjp8ooy@^OR#wgYuTdB_BS&HzCF5F3mkR9*bD}VtV`fe*NiRw$E5X(u_7d1^=ph&E#)d+#b9Wy+x%J}v zDeyg2d{CR+(YF`&Y4}d(cku9(Q`}RDXtKR}D}7q$VOJ&dMXm8Flmsocn0?_|`s(yq zfw%d}<&Vw?ya;1A#OOd%LEDe!_@P5BiD;pG)gf`?-h}8003F_M%<-pap-os>3~U;- z!oh@}(rFaL7+?>;vy0_+tGv`d|$(m!% zoHo2aPPMT+B1%Hha+`Y&0!~2R??(hS%a{E@VC;ov5BuV7$qiP$Q0DhO-YH7 z*b3@`uf`Y`%fSMw|F9c(Bg6z13hxTs={M;M5IBrS(57&pDm}(X7l=}+xL&ugOLR1H zIv2PtDyE!_3|qfyebx5hP`2e?#1t!1i#3wdpV-xQI95!h`WiiVM58}e8>n~U8*^(R zYPSMbFn9Eyo>4uSjJH^j-1jVI)Qi>-ty7WcXq8~>ywk<3T{rJQ8D{+F(cN(m+Rn8)-JDU0PPCx?zj-cTVI{ypQ7cZ)Uu| zCGGmmE z?fP$zw>8d`JY~FHxLWJmi4#-*BkMc0{?o?$r!X%gW%}>qa}9fo|C8grP+D@_n_eW2QLQV2}pwMe-l;a^zsX+!?+ z|M6)~>&b#3x{3=)seYPRL29xDn5?(1SIcvz%-ir@;GH(B7hP)1Yk%m9*yd*qr zh=l(c{_8Iqzwa#nwDEiA-#_d4-G!rCpKbiUdEW8cDlIu{{N~5v<98cw|7ON-2P}~P zO5^v-@TZO6mwxqG$L~pK13%mN1JMr=B!0q46_)U{`eYWvi2L{Q~35C`{ zLJU@V9OWY^A5)Ljy7}*znXtJl}?i zzXQ9Ve5_HAo8)y03|Q6kFL@3FQ942u>UovCPlX+>dJf5ZJTH`It?oexhSX$fb>GDu zb334m((2~&32lON$XV8lJa;6TgfPl_i2E39hm|lz61314Sk_j)bd+C?q7c*>RzGEG`ssaiL6)%Vc%QRF_nB@u*8b z>NNyzW}Xw9xpH9G5a1#~4?Vy}@9Y?WIxUI)oRcQ7NYhqSfu}LH65svma zC%?%tfttfGIatX57~MoFc(O_s7r+s(51L~)vFgGMV@@V(ugK81vT@kD{lsoa25Kg9 ztwzWP0xtL?VvpgVp&6v!WY0d-7Qi9HJlNZ+NPvrdhD>6-ubB;Z)UoT0t(?^G{Il%2 z8^!Vw8iOm2I^g}MSJHhUb)CEHX5^=44yqUQ0uDXo2sdim$xf-7eFCDtpw>-RtxJb$ z{pDM%HEPwWu5*_TuQd;TJ$wQ{)M3>*4+hAe*t_%8bEDMLW!0mu=hPz`YYV+_8UlwK z?4eJl&1dV`i$~bAPOC89W$e3)t|uXS(-i#4C% z2v&L^xI+r2E)50SaQ==oF~h=7Y;LAqo7c!kdIP&L11lRi3U9q;X&6vQMU5%wyVPSS z6bxu61Sj24twC+CLYB%pX_hvrMGIwo%?nW8!2m+C@Oio{O11p>Y%M1#md|SWBrE)& z4qjUOBtW0ez&v7-BVhU8_<0*zi!VeoimS{O7@N19gEAhn&ZFbxNB<#C>}Kmrb)72^ zj}@}y`wW)cWWDFrUaE`!6Z6n&B^{1EEhTNRa;ocGY4s4wac{u!x@u~nMK$}4Fvg;F z5-e3lXd%X=6J2!e4iaopZ^k!-YA8-B{baCbCNOOz>LVG~>SjV{#e~orVIzRJ+<(Ak zDxI;=kjO)8>(C%3wcb|Nc1E%bGK; zg{`l@x2(m{;&hB~IFgbk$i{zJB;!8pCi;6K{bR5{E7QiqGe`8oUm2x7cTozQEIGt| z-Scd$R)`S5(Xyh0lV;FtA4QGdT~^f9Ug31`<|u1$c0^8%!FI3;z_=(mYge%HsEXgM z6{0_|TJoICce}N^dr22(Wavfh*lnmQ;S;Q59)^a${u_9(0!nmG1K@_vS0ThG_Mxyn zBxWPcas%_JJ=m<`85QhC*(X1g*om_%TH_u0aB}9&cXn{swK03D^Chiu=2WNiI07@^ zIZ0c8`~{xC9RD)T%B?SrIzKFX-HB==u`%H^ysboF8;pZwbPklgB=5S%guO|5IsTr& z&lK#ibM>^dd;#__;W(}kka8!6E zp+Y2Mq!GPa<#4u^wMvE2F=032fy0lLawg{Ap>*PI4psDuHvm6>TTX#jtM_tx95?b| z|4Hx~McDPjE*h+Zd|dgZ*m`D|3N+62Ud;H0-@tx-Td29}TY#hvX9GfK^3t^R+np_R zBQa!;fUaeUqlohK7g+E3R)7bA=F_g%)_0;C+f`G2VfXd0!UulwXYJ}25#>hg9tfu&>5+Xpm`83I;9!eSOTs7{Yb(V zA-iKOL%c-TLQFaCfLWnT68p;&h};(KHN3Tq`;kg!4|Ys@%NHVy8@?$oms7dp+x49| z1BO`wZw9BGePw+D2&_Q@=qRivVm__$b#47?0MZ%0s|EKz=osCH(Z(eFgSLLRGg1~& z;PZR|M+h9F`!7NT64b2-;ZGT03+=!@n)@-?C56vGkM`(1z!ZC_*s6qe1%`Msc0sblke3Yy#lX;JM35laeOmTVVX{Yjl-0IZC+|UX@kZDoZ*0+z>sV39_7T<1^WvC zKt1D%=RFd5X%)T*p7LlbR^SHCTF_)%)CQ0r8lw107O-0(AMBxMP{S;yj|Ukn2BCP` zWPYSc6eG-%;)BlJ2$+aqRnC{O;S1ZNCUj{qc8yh3H#U+urgf~!Q3H2U$MS)FJxe~) zU&V2yQPmgVNFY4)q+J&4hE=DdJd<_ir(z~I&?GY-Ya#{c;W6MnT>63GEFU?McU;Ko zdf2zwqpHBPfgXUUcxU98$GH>EHM@MyUVW54ou;2N0*50HXVSk!+!7OS^4(QiAcNa4M{(P9gPQjM_ z3hqzCk_*oVrxYQKC|8JWoi%K}+w>+)?0w2d8I@`97($V;kRxB}104cXVBizD3cIp! z5C(Z|af<$G@Gz|iG(QY=yx<0z2eu~_J43Hmv{1sU+QL($RgE%5aSqivrNC4DG&I7d z+cl-YTmAE#f$}9_WJn~rfwvBziO%c9>{zx2xBP3Jo}n(O>XM=^%1mc^g?cJimvnVW zQy1*~@$)5eS+%(|vkpN57cn zwRfCy?smZ{?^`Kw5SY&Q_$n12=+o1Tf^>a4j)EbAYWWy#{enzaX)lg&PR}qFW$KGF zh1}ccg7JDXUPsxl+r(IRPa9WPb@5|3A>Iy&?(d)t(`g^D56t50E4vOH?>fXj$G5o7( zUA+b&ZLh<5ST)$IpN5*@8t^+}SO&fT*zM7F5JqcpcfT(T2l$>8GsOwy1`{kZJBjfE zaWXo0Bpjd_l|C~qM=#xCrrn^IHkoNR>7@v*JK4-0sRuTgDL6H|&e?_|)291o#2`XN zdW1(yidM2YdwAd%#G}1?8fvxi6BBXxYzRIGQ;C>W2-Vl)jI>G0lE_L6=p2t32FMXfv%x+wl-Tf&!5$(Jd2;&esv{<7VpUxWLVh;V^4 zsqvr}@X!e!`?G+wTLRD!qXw}yagk9PjPMK0x+?l-qoNDQQeqOs>ILCcu2WE}|1Fv5`|z((AwD7)szaZN{5G|3$rsDd_S)4gA)d1AG_yy>I|~1PiSM$K1xx{XVP+ z%n=wIVbY}_kTK>x+@*T6oE>EyV^#rXFtbJc%*I?eI8C|UdAjWMn2mr(tH7i3Agne( z6>b5bzv|psw$pJKeTDtw7^5=PxC^AHv>l6CxF4fB1+JjbRAu8RtdKUN74cfb?yJfo z_iaIMck_D%>+zAYovVS|#>3C@7{wWLndh;yyTtZJ95`z;c89%Op)${Vz|(@Nx99lR zXmu07`2;KXIJ8Hf$DPd^BP=Xv{~B}~b|;t%fX@!27^Z{CJR8BOg_LG_1Q+Nr-T4fo z<@RBAn(i^M@xpY3*qz7^6@%~OoB-dNJ<@pqhb_tu5OhXh2U83(d%2@Piz<7{`UHAA zWjGHQ#o%eVCJ@KEXWD=~I<-)Sa7kT63Ku&$S1h0bi5B^s5!ix}X)kN1w50IT ztg-#}J)b$|97b#)G-CSCg6(-mG2m&pV7FeC~RZEYbKhDa&3Gk z$Q%aHK;{|CQxnknF~h%BrukZ;^YTaVn6)d`ZrkhZ;ew_~vQ~G5w^i9-Q^qPwblD`1 ze%`=wURn1r0RvxQnuQo+)qllZeEc%8y%5%OOp%mL7D{&D1eE^snVcRV&bb*@F$fS8 z>7rX~geIehYd3io&>Dw1JIVZ(GditbC?Y-E(JTd1%F$gWg=8yt4=l}JW7*%rXO(Il zP21GDTgCsNg#vcvM39{p>UuVRP}}n{TMFes;3C>e@k!ZAL3~j*u;pWd6+TBf6yYh{ z2&jO&5eQNqkkdT(({7ldQ&P%s1jbl11k}$FeN%_=>;_nFgO9MM4m%lpn{wvTwYa4g z>}POC)GAL%fW@?8s|tjzY8}bG%K&VW0Z8cHkNBN34*g%SHlscNl^wFJF&=C?dsw>` zZ8gL!O&64)=fmc>22r#)b@C_2CJn)X-HL7vtDUW7f@mQYW$UJ(lDx_4Bg#q(eMSX* zH0N>nOH$!=l{bYR-OT3A9Iw8L8w+q;B1K-?IxwiW=&LgMQnFwbLBY>ramUElDwq&; zh}&&?abUt$w5!(g0iGiR(~*0PHkEnd_QY)gnOrWS-ky zK3Y}fsJ8Is|M{4;bEF+r2m+)_M~2ofTYlSQZT%`X-E~_wPQ5~f?t0LIT7z-J@A&D} zhqT7eMczuqp}NZpa4>R4;8;*fa_8kpkIEm5Z5*;+N4#KgLW0>!z}f;|TPE?QcPbP< z>QIWAeXA4PX4JV0>NtvMIBH~0bux7HLG}w8g`zHV22M~hcq;rb8@G9QCTWHj%tPSI z(3KH9pnJG@Az=uRa6*d;avXU`$qiwWo}@KaI7I|j@&pbQLk_M5 z=K=LdWv_7;ApDy1MWZ@f&wdgH+@SeAVC4N>E?UcXfx_%Be;kjXF#m-;QumTCvGS^* zXqD<8#t1+Y=qx_!EVgC;ti9dJ{}BTIzWb(7I?%iq)g5SFAMX^+`#ou1;V#m=JkTsE z3P(ncrAn}b+)+FtX-hiJ0eH^P8kdZ+`_gMHuv)$-ThIN4-SX$5 zw0&tngJ-tVn)676Xp`-Jbszf})DP%5M_ssxvz zCO!>yLxS0$Mo@wCL}eYA05W7L6Ve&AXLs<3(kJYO6MMp6X%*y?pe$*J7XC7d4sPXZ zJf!o16RUol+|gx~mvt8*T%KSvoEa$cV4GWe^dnF=iYC$&o+V&9lwk*v4m@xkUZEW_ z!2cepqHaPQ7YiW8I^5=FqVslh`Dk_N?31PcKLbjlI*rIJ-B&rOwO0sUdYq7$2H;UK zW6>#`a2A})bIGA}!hLHAe?#}+7vU@MTYa&yiEnhlys?=Ih&&Y{PhjM8#pEs zC=3GN>Tzvl39d~iV)FL>Kx85Pc9$_Yj$KZ4%NZ6f*km@7bi+gVIa| z6G&lpKbSL&92LH<@`+aShOI4i6&;UHrl2Q?XQWx+cJhg~}%aygpB~u`?K5E{=K$m1z`nWQvtP^U!IWx7lW8o!d2mdn26iUQ6(rJ~5(vP6nWayoW@t+?;7%sG_!lT#uy8sV zu9jxZkin{H0Qx!ps*sIaYvWJJJjdW+yXqwuJSJl4N1yx`8Bk|ybOiA3luFN%_Szk6 z`Pu7fNFLSd9>;tXvae7&PGO^bvXZNaQpimzBzd{sL0yZniO3#1C()~%y&e6|wx9G3 zDBgiwY~UI_f{uC#_TF`h6~ zgfnLhS$|F##3g2m@V#kh8JZ^L$xugqSUFrV3{;`2NjFx_X9ZhHQxmFLVpn6)f055n zqq)f0F)*w`nF{8^PIxkqeIr$?)CcePaCRUy>90k9{IOMes#Q73I;o%$x|?lQ8bI@` zhHzyGTf_d!+E8i%09cV}q+2^y3H?QN8LUoD&=FNrp5m_Mtr^DcnZ_p4dV~gHwY01u zP=%1=E)l4xM1-lcf!h6uK$gJQo@x{Alj;5g(rk%C#{U1~?QP(rDz5(VU3MW0uHKDA zjW$B8)Phi(Xl#i=-9R=3O?a_HQ9)=Q<)@FfMcq}jdD(cgbT2m-Vwfo6gFAc7(aDhiL@usm&iDGA_1e&6qzyPE`Gp4$HlAF_Au+%q$0&YU@O=FH5Q zUFf1L+XdO@G%@=f<&>ib)J9Pt_XGig|Wb%9q zwxjXZz?<5zw`kFM@c7GpXyjoGw@-;9j^)^)HZ2b~Dm?a8^%;&ZZ+z@x31?TY)*qPa z3PT}-|Cfv7Gl$UW%Pos8#aC=nT66`T_YGmz;}J>~AoSQZ>f6gIo_VHnasGJGbqFEn zMK{TF#v)Z(HpDVL%Z#u~u_p57EO?!VyT?=+^ZcI5X)ANOalyYcC-|nB(T2YT_ed^* zMGwleHTqV*7{CNEog@5N!^EPOzcK}q17znAvn3^zAEkt<*qAj z!3{nT{>M2KE1@mOLGXiXPKD%B$$l%6E^v~D@N(mVhXjo=ZMc)2J|a%jyX&8=2Ltg0 zI+mcfOemSPyrz+Kj}sRo&THEA+U1`5i)As~tX@89=N-FPECxzz@fCy;Ex{Plu!+$X zk$)iho$)zHIK*n;oz~B#mY;FB>#)@{L~gj|C2NUegJ|o2%AAk&#g`h6`O$akvz|p? z?nzzn-0)axnz6O(FmBEP=<$K>O%2C3An#`f5!K4=4Lw{Ft;u=;o7M^c&VxCBgcpl6 zya(_-^N`~UnpEvL5K2aG1w#CnjNYCJ-Q|Rg_45!i;$i$g>q6e1I6VWK)lZoZ=EK}! zMx~ysl8NptTnq<4y>RWhjpV!f*{hMKHko@RjD<4YecTH)=~rVfhL41Ot{cy+=Ox$2 zUHJ5~t`o>Wd-w%};ff1}k!Bx)W^*o@R9p3$+!w@jxHm|pL*AapbMRFqt^XF1&GH$K z=1GF*#}IeA2Vo*SvtE$Go*#*LxK|;z*)Ztj0^8>lwmVZV^m(Dm^V0%mG6gEhQ~CoV zVZ_>`t=(nZARCvaUVXAQQI6jO8kV5GZ)TW_(}Zj==)E!rEnA53H^P~!kMjy+71qk9-QMl5y#g_6%nld zz>4KFDsu1G#!{^fK4N9f^nIM3zo~79)CdGgACPQFGKdA03L~_c>N11 zyVta}i_d0u?p+WKbB&)yNl?;_{pK^^=bDSJf9Na}FVGLAq1m^3p(8Iu@IjlB$z4I` zvufb;hu8-*!pT8;(_FK$JcIN@Uj;1ccL;y);m^k3Vf-Dz-{0`piN6o=_c8vC;;$Qj z$MN?G{!S)CD^a}5TJ$T3!enT5fXHC}psmHFMO(CWW%Ccftw%ES6rt8*eGq-L3)|yJ zQSXD=+ND=*LPGHhH)?O<;NZE&%m=aT7h12k)hBG8u3Q;SfCzp^;oDL)c65HcWihxtH)2&W3hTXrXEYw<8k#M zMM>S5 zu22tbf+h&|KD+eLN?*FIg$C*Qa&P^~d8mKkE@|y_TQ@!!L_910?x!j~hhO?tJSwoC zs`zq5OT|}9#mz+RO0S7iFsrZ?AecCoWh{J!5RkbEU*Z@pL)~VLn`At<6OnpowGTT! z5ZodsD7kvhij>~WktdG3_`rQq1$P%!@63QcHHkMrA-N%dlPlL>jbbzNn z;C11BS86c)w0RyA-+7#lKCAqh7%iR9K2%yGwjW`0TCUM@NCG2_ zmLm+nH_77W|DYr779M7S!$6}&))(MPc5qt<#-eTdJ08P&1s|=|gZ;Qsp~sAV0|gr~ zo=VA>mncEd!h@`)D?dg&aKsWC%d(n$F0_;<#{4}omMXI-&{c8(UE965g1(`LV3F24 zVk}FBEOEtxTeK@UkjI!=gB=l*#ttG6w8NFOeAzc+0nA{SI?NzL<)pWU2 zb8o-OD))S-8_d2;i3)G_;cC!^lTzUgMt2`?C#TRe-JX8zTvL~}rrVRZJ<38~OYA8G zp(??T`I@K``vQvT(aKI5txFJdM{U4|^36#jVSK^6`z1rJfY;VyxrKK~n$2r4pEX); zWln2zhTOU90{8JdYyGET>^(;=QEgd_PiA$Fw(dIYfZt`jmgpIt`1>$7o&${5<@jhd z`k+puomNUFf|cH;8L_2!$K@5V6@0F#!7q-HFsu;ocizKvQp1wq1Bmv5zZBv~UB0WW zYaD+ge1k)WlAXxz7;Br|!W>I1qF`Dq1Lsii%ejOEdL&CM67yS+MQkEV6b6X{gDh(` zB9djkspJPdD}^rvO(X1^VYadmqsBK~mOOnk0W!}4y^Bu(&By1kG2K@K8v%gL=r2jk z*nEa9(oI{30{~UIT^-trlRmCnCJo6pdrz7k#8~gvw53#d-PjJmOF9$Bh8tEGUy9|T z*Sfju*{VjY0#Qb+QhtN@HP=WRwvb|$_a4||6l1huYqC}28b&c@Z-6Snfbi?xoHYLq zF?uUA>(OG%!C){D>6ilaE+3n6p|rKwEe+e^0_Yvpfi^$I_Ibm}k$yyxii-z!B4o7i zMp&zH;EQ~TjlgdoluhG5NEfS<3@2=7NNe=1N(a3Y_L1LaY$h@>Ez(k3hcg==7~OJr zsW8*luG?~rziO+Nkw|c&*TPtA5zmEVy=5f4v5bT@mo+nfg}nIStJYXXZgKA&+QQEz zu}1vn?u#CDm$bwQxikr1Rwo+wg~yu9?m~odEjBtxiPr{HiyGHr^8j--uFWy6l?J{3o2OELik~B^DRkSr#9~8zhW6Tjp zdIg60VS^HWb?KA&DvO}%#hf6vDB;P#2~MnsUo@NsL^sJv@$vLUr%7AZkhqIDo^NBy#E%1%@T~Ztr>n z2RowBHaaxJ$^*z;92qK;#xz>k7+8PQ)-5gth|41phJ3`9yew`c#g8^+k0BR%cd0L} z%-Pl5)3cF3rbKF!0mFE0-SpCYY}y!uaN>Bj(UL2X*gmN!0!#K*kKl$odE}N_tL#iJ z$N>!YL;|mB!}>P@+-LbRp$hQgiLo!h+%0fq5*R?$4cti~BJc<8*{N`%7@wO>iw`r# zN*g%P)6yib#K*!u&KS84`z-WUX20RtIMQoV)E(>A?TCU=`5eWY?({0x;Pq%=7k8Yg z%#G5#2F1NTm+PLhjIGIF0A>;T38whz=wxfP5Lwf@6~8z;mF>QB+XWsgfVVr_FlIFR zWXy=oL4+I^8wEz5$rLdn;gM^t4GHVVA@thP-K8awpNLyG3naM=WW%Z`0;3XUi|~R- zSd0Wy(<4D_Dn7&N024X_$ygk}g0A#NhLbV?C{m8VSDb&uuQPs2*sSO_r+zZpVpfK9 z>#wvhH$#nj6`f}AV>pP=S~gwDthJ?SUwDn}wEM1+MrdIxYU{9bTDrTrMiHmzsymJ@ z;oz%A;;Y#t?k-O&34z5ANmFzccGh-bM0M}TPDWck2$ONLy1${zT%P zK~~FZL|`lQno2z37TRnLB4E^<9W04)G|-wZA=hkDLz2}P=pCD_7}Hvn?qFeC;z_0- zXtwZSPS5r#hBx+fy`|#xnrxp-b%(iH*@vd|CT%TtyZX#!6-b0zU}nQ#@?33I(G6y+ zPsQBeWSE1#!kl&0y+A+=Z-aOCh{V(rZ9NvVP#Kjh6TB^Mo9uIeaz-JFvIW!n&`j{G z(Xs)onAV4$B3n|w-6;X+x9b@Y{q_zVqcU2akq^*sw@6^j!ZX_rL%-dnzw0qt+7O3R ztm`|VlNr`lLPV=DEY_4$oK`7qjg+?ZDzSAfBTcMl zuHsc$hJ3OA=jR+KNcNypfi+A=&6Cwl4RT6aLlBi`;l5O$S0C?-34HnyYO%W+_;{xO z>@G7VEkoCa@BqNl5#nM~UzHu63f})1$y6J)FbktGn^_oTKfBBFpSSzKX;NKGDU>Gf zjTrhLh!8GTC$>>z4`v(+V>po4ViVC&3bE8prbQ5=+cB*Jb@)s*6Esg~wD<)h3FAr;^?H452_5o`nnXho4xwabbj(p1MJHI$z zasc=AW4PY=MbFu|yiwmAg!fId8#@0^RHk7IdyCAedH(|TYvFt`kMHep`VKt0P96hq z`Q;;c6+$@{#XHOqw*dSvp2tDUZF7#txo>%QGhzX=?|w7Xwe+MErjs!>q}9 z9nUb=$s=)k5&hauJdUA9?RKWmXX7Rf(xfVV(YnJ==H%PC7kNYcC!ZkgE!gnssmn9A zCb|dkEb^-H1(u(j_1N&6%@5yEkvNcm#EAmF*MkSmdvZfCS z0yVB^ECj^$c@Do~o*O!3zlwg0h2jQa&9&mB7!o~hvH>Rj1Dr{Jx`H?nge%W~iR&*0 zCyk9fnVmjM=-`%|)l}F>x$)WNe#QZw8soa??S?$4jCR zwG9Rxc*2*f8n|K!_QotdO}m&v^Fr(s=n0sE&~6|Itw4j!M`*P{3MZd78> z=^NGzep&46rqQD%%9lnTcQ#^vffreqfrlN&hy2NC5MU&QRgrI4w<6XG2B9}2kc=(G zFNx+L8GngwV$EaH_-G((Sa&f&yypZPCCK>b+tO~gBP{z@(QNauY|oq=4l)u}EDE&; zn|*%(RT;Afeq+D2SUC+gJ#lh)qT2`JvDh_D__ZuS0US#5Vlq4QyFh*o(S#O@UrZM7Hj-4S z5}adM%}m<5n7=Y%1PIplo+NoOQ^&7+x6zF<8R6b*wn$MeOYmm4NKq}#5@tn=mL>@k z5vYg~CZtEfEMv^jWrWdI?DpX*BToxU$lh!$TPjJG;5T+OJPZw3GBsCwv<+KxN^Z&1 zmTkdI?m%Ok7W+M0ZH*L(owEf{F_D3RbD(ROxiQagu3?GBJfDHH2H40kBhQ$MDXFwm zoIC+PKm>@h<5*T3%O$m}e8xH&1BM0rJ(%gO*m8WwGHno9kcY5*TZ(1qKrp}%egatc z4ODRLc@lrz(w+0nsrkm#Jfk8X6HKH6-|?Y$d$rhR3_PY{WyR`EK5i!F#;>}7`1XID zRwbd+QS{SbSQUs$#zw%p%np@|F72m|4ypJGO!bm~!HUR+2J28v5i(peSc0S`E zV_|lVxxhXU!(TrN;A-E(Yi?JPR6vSG>^`7mGj?eq4a70sH^4lF7rnI-zu+|x1}FbRn5@)Bl!lq7`vHpU3Eq-K-5gSRIR41^4g z<$^4bpp66POCS&nq$B1z5hNTSEuZ?(H1PH`#2f@vmvDGPhB_67ft%FRj}6gc*Hie4 zh%zlA2p<|P6kTeN&Hm7A%_XW=8xjj`LGq>e@(3T8Efi`)WoUzy3}GY2uaG$cBjjnJ zkjs7p`#R-2zu+hx@*NzbsPjm#A1dROwql1b@s5wXQM%Qb>)wr_SzFc0oZN4_6WJ#{ z7KP!^H5879`jr@tkrfyt6D9L7Ksu&QEq1lcUfJ5%BZ*%zv0EdV9mD~jIQE9$;y4EZ ztqIDv3=)uZRsp{@HBi!dtTA{gk%kI?MU9Zc@zi4c_yidwt!K7KSyle{Vs{yYmfp&$ z;=Uh8#Y@k2jK=hA$0&Q`E)Wt>j;d(SZl>0)#eNLS3|T?Q9>ONAY>uu%VT6MiU;{#E zzQEp0YN~OZA4nyB$hD%xLk2||J?!PkUS=n_I3~|1&$nXa7Xc7`(3w{mb78K!flxV%#$!Xuo?!^5}27Njx|&V7KOrC(@4l=MAy-$s5gnqN9hN- z+p-+r>_^^ZhTUQj{)d2bUXPL?0-T9-}S&3&z|I-u?2HqQ4fxnlo`w(?t!&9+@}7 zPzpCq-pDd_9z!N|b#P=DZ6!I~5VTIk>wV+kI_yr$bJZF%40bH`+T|Ksv4EM!m0n!K za8z_*VW6aFU#yU0UxN&sce^gvAP+Vr42k^08IGjA zhBO7&;eE|_DM2-US^X(eckYD=;;r&OCjMGj7fVKK7cx~6xs zRY7hCtKkgkn@14D(aiN?j?orl@aq(vQ?)u5fs=!M{H%=8(iJ!<_>KwtxF#Me~^XK;;XdC*f{Nf!;}UISj2%5g3m zcbPA`3w#EX36o7OgS~`pj{TdpJPCMbTb8hT#w8lGUHf;~SE$Y=U~~i$H$Bk*{TjUM zb-C=n7*3@VVZIZJChYSu3?ci(ZBdUpN+82V7*Y0FNW{(kgNY4Rqw*x(NtzjtgBp0k zs_CVWun*&%ptX3x>XFDm^<^i%Y|QMG?&W`Pfokk#M?t{c*kyYj#3Fw?ZM6+2gD}iR zUfn3$iqT(Ag~z1JW$y-tY4|dM2Yc!B^IYK>@ECYWX8k1Oi*6{G50=1cTABc6h(+54 zf_eC>NQfmw0qTz!4TJW-0}6t|6M04~bT|OqvKgnyOlc9q+xGpC0_A=*0$*tq77PoK z(1c^J-e`;&F8e%0YilT8u5;mI*(%|<5e@xb{T zmP~aqN3v58Qus3{#Yw?ZGbxrLg)WCdha#aB7j~Y zb@n@9onAcn(Vpy-FZ<=CV=EM-MGMm(xofx2N1|@$kT}3R&ONxNe(Xx8!24_Hf#5Z;kSiUe^uuFIC z)Yq`1WsQaauo(J^#lGn7%s!^ANSu#tICvw0rk0sADm^oT&avc*5$iGLxJGq8%ks}X zX6%8j(!Dc#hw(bm%6XH~Fl2q8t#}#7vXCAZpw2L^8EIB{&F1+W#3s!!9%%v;W8}tA z#x!urgzz}UJGIhiVewYcBx~lSS+Q+qa5^+u#MII6xfQ&t5U$o5S(3|>tGDHkFWz1w zCqkq1P=Ma;dKMkh_1rN0Xk{fM@>BFg) zs9qcGiF^~zew1|Z4n{8anhC&enF!Obl)xonED0`xQ(Jr!QIB~z&~s@q9Skhhs8F&K zuI!Sbtv7_mPfdol02+Ir+pe2b4&R{BcxX%fw!iSKdLUlap0IP{xGoL{maM8aM~bl) zJ=a&D=@uujM3H#M!&ZC{tk2=eU}fn#b}zt0HS+SD3jDn9ohxpC+CzJSUHlz{ao<;=l3En8@zA08ZT|%izVXm|W~o2@=~emke*89DK6QZ0eOC2eOc*E; z&Sd?jom#)g$s~R2heI_I@c>A<0%6c_IUntz<)!VRUskqoSBQYT+sO5{qdP+{XSlE)>CjCi{Ky7&EXivQ~W{weq7?1wUGo*K^!z;anJLl$8tRz(J6EG9u0-vd7yqd*K@{<2NiYTMg%^5a37m!j}?$Odt6A47}tI zy7kNdD#CyAP_Nny{T5V92H6W-N&dKupch-S7{W#^KCnYQqi?14Yb^7k(cut`wPZIG zC79y#k9>*vGxNJnGwKQ=S6$3{7;S1iu_MZp-e(_Mag3(tX2>ykaf5_c4b>7JN^IaH`?o8B%)FcaX0= z7|6kqk=})cwmh@K54Wv@Cc$|&O!HNF`U5x^e=Yond6B7|&w8|lOYp&*<~0Ub%~Hc@ zUaqI-BimA#5E#XO&$1EC>OA8bf8u>@aMxU8Tm_b5aA{W%8zImUnXfFo%$ zKKbv+1-n4v*Gb?-Gk(1Uwwm#qB(TMdUcvxQqF!_gKfrU5xNHg+xIK~mcOJcf+YLfC z{KyBirhkJ-?U;@qcx4wy%JA6k3GD|J-JKw!qMD|+V@CRUWVj(shI6ArhKXO63~=*W zf?e&u;KsDXyV_u!*vjcg5+GcHD}NVF03&w%7TV9}p;DbjWl_DL68f^JkoejYX+&^T ztUn_BTt7tQXvZ>etX1d1k%=I>p#IiBgH~7Fzl@gmi_!9G57XbeRp(73RQ1mwH1}Ue zXn@*D$Oii?It|bo@54x{w+~G7&_l4HpVDyGI$cSN1p%9Gyq9Z9C9QD`;{JsO^r|DP z8BXf>8>EU=Hz-Y*A~f77cx1YChJmUChw#6`KtsN`rG{t^)BLZuXQc^q2S>rrkue#B zHq`vftTU(=p>)@ZS7tr^LK!x^|&89bSYK*&`fO0Ro8iy+c2d%LM zabF4vjGT#gQ0qt1wVs6>K#?=Ghk3VvRp(2y=Fdou&*6mfG#-D3SqP&I)U7W!+I(uD zX&;>C!1ud9p93@HUhyxNTSRHz%W|R4e~24?vvz047IuZ&&aY|@XZ0t=B2xK(BgJpU zCigFsqBbu%QT2jeQqYqfJn)SVZteJ0A1ogD zVk|O^^DxX>Ajtnqjnlf3tE@Pjo;p|U*Ga2t6X_>QYg_~jjgKyzg*lN@6t%Tk^l>$K zlEXcj;blvjOn-wl3GPN_mifzwx-D<>w56AtK%}R|L~RrTYG`t&JVz*Zq>QdGA{ub zdP<)JFa3w;{?zX-OmL6w=XCxI`n2+chF=!?aOuj&Tx1yFAo-BVI$-9o zQDzQu9$ID&ILz0PfV)*F>DFrb#);}``Gy^pR#avcVm0x}tm5f#??lpBhe^*5GxM1? zEbmxBFSdYVbw0Ee_wm3Vf#vmaXLzX1TI~DPPB2{cPMr4K^a^$USDXtJ((4I(AxLmR zfC2aUwL2wn08Zj1a0o|-Bm1qQtKibzj2w^vT*2X<1;p5eN7a21xICypW&^U$;KMu* z1{myU9*aALGD`;bgqx)S&goq(q&1#`%&wRtD+H%S{;VfY(|az6EHrEP>d6a?+Pw`u zKCp!rt0u>WwhrVQYI!A{iE1(D?npDbaw4K>!%({oe>z*r;&x4KZBQIAsV|u#Uj;;Z z3%MdhzxiUr5!&@_AcrZVTy2OQnV8jxokDHi*bV!Ywcr6-zGI8I1h+t};BrkF7sg^6 z5J~^;vZ!LJW7M&woEpXC)NyPj!Z0mK+(H;Imf&4&Q^)=>rp5$Q?cp$DyyT3RQ+RZ& z82^;URH9=4?M7A-d^2O89Vh-uTvwg`SXBUXBPo0!DKs=UjdAy{dRKgJ7=CjyOy*rqBe z{3D_#Jkaf;C$R9n$p_CP+gTANrIpb>Uy_DL_5larW^L_X(_m489i0JDQAGLPn=MvZ z(sW^Vzb4!c!ubhDlSl!MGy|Egy+&*`o=Lgx4vf_Q{HowP17Dv348JPsJN#i6I4$YA*h3sxI7sOaOZQ*C=m|`%GO%ympz`ei+WqqNDA<90c<0Xo8>#9C=T&fM z)l8lXojhCm=NZ0gAdQF76JCM+059Iu5Bp^{NM$ytPi9w2X5q?ya9Ij2s}I~+3T{L{ zI2xT$psx?ye_sz9udp~80Ii_KZkFa@BYLE@aWEF)9=Ui>i=8iD*$dI*(oEcD;{Zh` z?&|4nDsm7EiQ>qA3=ts~e~0COaXG9M$-WiNrT z8Qc)tiK$(~7D^sjlMyQz0Og-T%@#w}l7J&~2@fNzTm$r5)5pAFD?MO3T242s%3ZHS0DsB358u4HTp!u%&!7bc_Fc_(Ch zmWblWI=<=;j(|l|-!{OA^J_YCq(plAM;1t=&xuqO!?DNaB}_Oi&uFILGpFSn&C3~> zRAj_gFwm#Qqou}1d?n%)%@DwG10fO|vO+qqzYDa6gkO!P>9iV*<1i(jf8W9Drv-W>k;j?JyV zy?j{0K0Eb_p&;5DC5d}H7U4jsx|dRmaIVa($8Ad+ag-K$OoVR>JW5(g>zV~PgV?DE z*SGvk$$qm*N;WG0JhnV|C7TfbXk#;w){4G#j&Qm=2&qvAs_08!Fb?k0*BJ;TNJ7XHTLm8+QCX*D;>ZD!$Q)--vi) z88H->FkT!@LRgEHqxWD>7Q&v`Ou|YSi#H6@L9CFjg>r zXv`upTAD!m%I*W$I*my49-sN3-f~wVjNN_M-6@%L9sG>+kyoMG;yMW^Yc4vc8@wJS zX?RFXr2B3z{2jE+K>ncr!l8Tc?UJp}!RYJKChRn(ztS(rikGFuqichU*byV+{>XR2&HY5ERGovvcCRSdQ}1FW~B<75fm z&?yO(Ojrf? zK=bhd8)gh#wFQ4U)Lc_*F#Wca<$13%Li$(*ph}EwPpWs^*~DP7>P-O+XtJ+o~Sx)nlc4(6a=-#nofJdfcua zGt{F(J;tiXNcG5751)F7BZN^g8v@c{zq$)~jbhMI4b15a$7*Z$#GB3{NNKU)7de>e z?)Reli6>dL0f{GB;Q^_;)hJ;O)7JJZTzVzb#m|G39X~0O!qFbUfUJIV8QBhVYBY)v z7+Sb$5=cfRK0S`CARBvBdq{HJk_?d{{XlE{5ah>kPk^}UeyO^#saSRm({)53k3=6$ z1N}e&VJk2`WAUB8Ed)(z3UQ}>jJM1y)QBG*1`D9LT@ z!%U51mr=q-ocq6oBPp_lGgqP?fPB>2p$p00KT0LL8Szf@*3WcQ5%}=|Fx-_{@mgI% zu;V<D3i%g1BRIpN=Xf<)@DYjA z*h!D#re{$MlyL03UOv5{z}VC99@PP}rlH6<(ePIUU86o~ILJ8I;_zsAiQ!SN;SOU2 z+;1CztibiKkv7wsj-olyf zuuN1QqHq)o07-zR+nm=nhtGG0T)G^;6#y1?VoJq2u1ApzEAo0JYFcc@1a5i(gxnma zs42j)3UVRNxABuRq)9Fb8SjRd8@Q#pRX(2J3AN-#Uq+V;Xpo7`XS~oP?C$WfiS9?hY6aS~G6e{n4`zw4-<&~>;^~f-SQZcpRz zIevUvyQ`=1r*mMl*Aw1~$bQ+M6hdabg}k|JHFCE%!qbPN$WotU9F9`S;D+lFq&{eM zK}23)ZyUtzEIw@WJ{%YY^OBT=GDmHNTGZ3{V=1*AiYhA+d6`8QtD@grwvt8u5SBrf zMJiHTWTfL4Kn5YBbmV=LKSyxNkS{Sd?;*GC+YNLSNM#<)B!5=b)3gO^X|*DZ1Et={B=p z1uHx8i0;L#74bUEO^ZI}viF3OG+A+jj8al5{p`m9l13hf+tT78{`w0nVfXu{FoHF+ zq-S@E#$6sMhDL+o2ZC#p{XF*V_p%gaMaKmA-%i(g1nSIb>1Wp2sc_|pfZob-UF-7! zDtjKavaO#@gnh?A(9b5q&hiWq(!`PGS&w)j!tl=}LJL6t9}r>fnV%xURh=M0TC`KL z_cqo@DU9-xlS*<6Tu@(^F5VH$=3rd6giqY;X0DMgfWd9{|-6=a31rhO)-|ma%3&zmyd~xx{%tgpGD>)rX4t z*~l*YA@p4(eopBU{OWXS?Fmtv?e!!M;jMSb=y?5aK+@Vu^eTCKAZdwEFB`*6AghizkX48%^Ild?jeKxpjknN|g642(AWMss2S~5c;el?H_?`Fix~M9b&BIeL?j` zAEcP@2H^@Lg@9dR!@v)`%>~K29c&01`&?;!-srf~a6{~P{kXgSqSE56_1Jk?cYa};GhdkEZAZhIQ+#uiUhqh; zIIBLT>~H18VqdCXno*p={iG8smto3Ys}E376AgPJ49&ert0n~PK^x*mt*;o16iya+ z`{`RJF>JFzUEy=p#Dw=op?_urjziU8JbM+y6R`Fxo12Tg%wEduJI+giF<^cR&Y&7L z0B_0~i*HE10$}2?gIjAy zGfw57%lxiy|Zc%C3({GE7pP#R>o(3XuK&dH zKj1#DxBDw1|1C@Mi(UsN*dP#>JW z=>XA`Sgt3>mEZ#PrYq8o(y;{5pkc%|x>D6nHJ@k4*nO~Jb1nkLdCBp9THBN3bJb&n zdK9po3|=JSerssRZfG9~;=>KEzG)mTzQC%$ZJ1?p7qp_5cfA>RoeTPGtAFBoW}JEw z&B1>C-RbZfAL<+j{NY6I5T@An2t*aO_1V9jxldGG6sC9$j(boKGde2)MC5vASw%|9 zMMgjl@`U#zF=Sqf1)Rlg#s}g)xd^d16tpCL>UDy#(@^(71tH>%W2f2|Ubd#WqvJ4@ zJe}i9meJJ8tCA)b@2MN8_jqdF#?5w}Kr_xna`$7O5Zm5Yf^l z8nzq(fI1unr$rBcLQK^)Omf}UmBd|p_`f8YRWan|DJOadqvcLZ)!zNJ@rfwax?g7Z z4m%Jjy8zMZc4Bw^H=T5d?^O&nVw=9~%hxAq>ax!-?2VGoNaSOAZTO<2Zm}ca4t41? z`Lr*!y~k#2vY->720crmRh)8Ahf)1$;7a?=4Sy_8bi>lF+hzZxxt-R2RVB3$e0`p z!Gk9S@tC0=n3Y18N`{&xuTYbE#QA`WCVZ^R$NhQ3ql`#D)@JuKwlEy`l z0x?E8QXmW9_PrBSmFA;@8(9(O65Hr$8!$zoG)V=pKSo;{h}N97*A?+is+f%9^7Vh? zXxq1{tFcz!_r zpn7R^+@;VDN@-62dUWaSdS1u9L)=t0Yq<;L&`!Cdfz4Km}BvB>zvFP#a@Q~>7GvRnIk(Ki33D4x%(fa>1 z<*smu3jLU0dt$SG5(;55ek}iWwQHqUDGUPpd?;WnR13AMCJEOuLE{h6Bdqcst#zxq zdnoj>OgCi>cGL$KB#O7H#d`P7u;0Sn(tjUr)r`e0bJj#UP{HMI<9gc*Oo#K%W5Mjm zS*|0(5e0IS8~%4`FBMp5C94P{H_f`z8~1|^;y2ml_U$_)1o-S;cshQt zJF3XeWoduFxc?jiM4iXsE!0N!0qp1F&E`8P2~#}W+B*xywdZA+g4zb$gz^Gn?rq~{ zweOM0>Pbd--+RIp?^EvckoEmI`4QZCmOyOPBUT& zpnvC1%?!P06`?air#aK8-ivuj^()rn@2!DS+X4s^`{`878cqcYr9{W=gc{s|D4yQ|dea~B znmp9B`!GykX89-P8Q?@zln3^&W4{>JI8h%oO`F*Ohe-(7QeN z6jb2oHHH9m#*J44d#!ATRWz73&8odda`)f$_ucL;$2>dvf_9A1=`-)$RA2Vq`3A11 z%`q!;y=GZ1>eWb>`SVrX{N}&`TM+f(p5XG`? zFL0|NZr@P2DM3-T-O5Sh*1r31`g?Bo9>-EO<$`4Dj5KPUP$p_|iV1jmip(+()@S^M zXv%pRd?JT9Q~7xj@Tuv=2T^fE^&yd2b;R=fN~#Xj4utBP8tx7q={?U!4XgUVsGZ=} zp3wf{owa}Kf!c+($Hm3-v5MTpW!o*|M9<)!(Z|mCt~9mZdMv}kYlo4CRqy*f=x_i0 z8Xy3M`t!j#LM*@aX933IkM)yF37jJ)z@-HK0fA?|V(HVFGyAnJz~BMv=j8+zjnucA zz@-3I1BEjlruUoH7<-JWrP66@Rpi2M2n8RA#NL!k&&d@owT?5O|Vc zt-O}HH?{I&(DN$zo1yk*)vkm`jpOzWuwlcdvdyeos-$**->yJClrkQC3HII4YDhDC8)A)a-T|O*sS)O}eth2?r+t5XGo>GC^1^o+ zr|iL$4)%AE?laqWrcE4fF&F%14N`Mm9J~^*(fSVmec?`9uit_2v}6QS}V&VR%`tGFDCl>^BRkRYit~ z3f^%a(pgnIW#p7fD3jFf$XtMi0I!Z|05WIKi0uns=4ixFz+84M=2poG(5>3XCnxyS z!>=CTB}V4(VNUd!vvJ)2Bm|rG@VAlIwGAhD)>X4E#tW#3L-K8o;&%o!URZ!=4AZAX z--~Fy_C<(c&Oa!&rd8p|^t0OfsOt7LOs~2evJ({-^>NvkW-{o3JnLWWfdsf4_^{&) zWd5%UQK-ErPd-I^$+22&0$RC$TA1}*_T^66ZO9ti!i~^sbJiAZV#-(~08PmZ-w{!y!W-==*Ld0 z&5muG|7|EHM#W5as@z$dt@!CPQI43q2B;7;pZ~rYaZ2;Kj(z_&lx@Yo@oC7oK&sjC zcL-Sm$X@x+{ij$H0!c^1f>i7agL*!=O)H;+DBh0DE7y8wY(}M=WJR0^-Q`V!hVy(i(3V3=V+1!=Pk9MK8h^cD{}hep5Z^VrS_@fqMD%e3cT0 zC0MG4(2O<-C%o&SJK*@a|KO-Xop6u|?qFiXtC=Ud-SaBNQ*(7HeCt zAzmxPcAy&2h&O25<1-@7=5>C3lV-pp1bo~KNYplY^-!~BRyQY(4=`TS-~WU+1kP$Q z#4U__ul_RBgl7F#idc<(=W?a&ZTLScUH+K5CKSD&q z=Fzu+)s}?;fme1TN5HYqn#j)k73`0~SNqMcvztaVI4}UO@N-8SW>7Gki$wJ9zYf*i zR4OD|SWzKN1h=>oir{i8(d{)RjHIiH31f^O6{5og z0b%7v!u^taht*Utx1|;p69);#-mT+SAVAyYtx3gT5@33 zt)@Z(>9uin_h6Pa-L2{Gb{dcFB}@xR@7`{e1vEiPE+rJ-7Wy{GQ@2Jh8#+DGBWuH? z<9n+#-_Yr~-YP9H^jDZmj3h);B*tQX`_R*agbs!WE`40}r?cqv208k8(C3e&mpvZT zm;i@leq(|+sdM)@|E<3jKj7%mrIqF+pJ6t$oJaYU{)3JUs>ynej1N~;#|9#d?nhTu z#|EhLug0T`0guak5(fg${lVOKd*+g4zk8GMC_S_S0dwkf;Cqmw=0 z3Hy_s;Arf<%rz$9BI2|Ywh4L33Hbm6xU#HGz|hXOfO=qPce##E7@cqGY)$AUiP6^< zJO|=pQ7FofY5R4%H`_Jdymw^cy#d90>OU~A9fNz-;l1H}Zr_3!G`~}zt$Mi~^G{c) z`JFL|cLx-2uRm<+WQ=6+6J|v;|MA4h9!sA=@=7P9j^^F~frW49;&=!u9ANklzn8GL zpe;3EwOfB)NDw(=r8`o>&nM4@66(j>H~6;ND_ZCU42PFX!m}9Ox?18fTW%z+QdtNP z5%XTJSvMmFcj+m#ZQ;@NM=&^@QeU%4r?)qw^4m2C(hUiMcbQF>O-F?g9E0GkDmV_o zunJZVj3IyS@jV%UR`>K6M4S3ZeoPGhz%(lvs%kdP3JEls*LqDj#j1)&PB$Zq!4V7o z{x}e=pR4@<>r_A3F<1NER(zPN{cyn(zo$m}JzP;f^08GCp1B?2*XL?y?VGF3!1D)H zP58O38Bp)w@4#Gb=DUE{0tjR_1GkvpxZnn4kDJ>!V|NHBzwS!jl5S%gM+iSRE|@J} zZ)$_fn~${Ya$%KOpMh{=G#C z_nC_n-XjwZMv1q-e?VRJUWNPKZ(QUcw-v}ip+8TM+ezf`^C{$f=F?*ZxpDt2axWTH zK{HKuf_obZYX)?f2oy_17q=)K)v>0QBu7N(S z-|-Mw=vfLKi14m=KxE55$^EkS)K>S)9heG0Cv|Eej(`3sGOvDf)=Jg{Kd08@=@Qmt zIctKSPt_z~J{<(!re22MPxAmdwSQ~>f5WM#3zkcWC4N4IWsdpuRO0t-^XW!D@6R=# zj!PiVe7Z>j`RMf=AHv_Dlclk@hQF3{iR|xH&oIGcjHqZ?j*6z&Ho_)NX>##XN=*F< zI}eR^EXqPiLiw=2w_f7S+QtjI>>IB@>D{SwMO(pSuL7Hb0W%EVelVP0QP|e7WhshK z^SfD#E&Z!hKE>GZ;!P5Qv0*6V)XazH_w83;|LslJaW}RF(Z6V)^G;PhIJUYR8cl3h zcm_6I6@PgDkKiVU%X3DyaW`D%D1l#^(+#Yhn`o5MX~o|T0!nn^N2W;#IkeaH-$$?}G3D^BFf`*>q&z+eV&e(N`<25P*; zAKtU2_``@_KNgH+C4;#f2!#5l$osVYCeH={m0`H@fifI#$D8O7xzIx)cA?n#bG3(m zi4g9fy9Nrs-zsvO19LX=IAGVH3Lz|JzLUij=(z^#Lc8K(Ku|yE2pL#Zf^7ts+mJA(X0Ji{Fb>fPp@fm)m z=dra#g9>}JC%bmPca*$vk_2{Xp^pY1$K=hp!E4Uy9Q=_ntJ4@BG$sacN4Z{o1YRw( z?jKkZ3f$A0ZbmEKilI>TrXONGf%66{x``o0&jw^`uezM{d_{c+JwFqYLyH{~$alXO zQYYlifb6B`sq*GZGaKUO+a=Sy_nxDz9bn!a5LfEh*gM|H)=P7IP?{gWCw9L# zs>}FMKn$O74^i#I(GnQwKh%%c-T$?Q<58r#_YN$&n9n?N<}WB>e8#63AR~(7v_E53ibShiiV}(~!*qsa6)gLdYCI zDtQX$k#ygOYuS*KJqGbf%w5?fyqS~68GD!5XT}L%D{rqbKxWnw5MF}6_!lkdJsb(6y21YEwRR ze}Ij30XVm4gQw4StOssbGm^~ug8F{aeH@m2d@tUvRc=>DzY2F@mFqQ!4fGAlFQ$@- zQ{HyJg>^N;@6alD$TVB4#KrH(yi5AOUemhLl>vT3fK$cWWpWP4J{Qe%L=Iw?$xf+_ zM{Bwicu^Kq zML(U?tKQr_i3?R&yntO zC9yW?1cnih*Nc8uC%e25<6-ctzE7dpwBmGZTPMO!)7S(VuX zcqNvQKyMpREJW2F7Jni_AUG;!MvACHL4e_ESwt2KKWU42;IiWni0DVJ^!PjuE>~0^ z<`sh`JQl){bM;d`0xL6ZBLkuD#V7i=)y|32YZg^M8 z@c+VL7Y~o0S3YrkMdahuC9)BZOYCm!sxl)xt^2T-p1>HX)bGOK1I~-*P8=Vc9Qhb1 zU_Zq`kk*V~CDm``48kp?xX!2Q6)+{A@Tlpl5KlD3!w4O6mJ0i`@hC0EW`i|m=zxcV?17%D7q!^E=uN3{uB|K?>mA-~kb6MQKKK|y zH#Q4UXrr;51zO=s zEc&&Bm&B6K`48bkvLK4pX)fbs4rKUHF&Wfxv%{n5B>m}==D#t()F$|hzWjGY@!xN- zUZMDJsS1Jr4l<-PVAnPFP@?thUK^;2pBvp~5z-=i2ZQg+{e<2H;v$t7wq0*hQ>N z-BobenjxQ>uPr?9;$iV~$CsB*L4Oz~P`QBWgD?31-171K4({mzBP~tq7|#6SpJ?yv zAvV5bdtaDNl0i6%iaYa5{fMJKN@GVLY(6j|hg4%fJ0acJt5gV$Jp}Z08XF6)F8i8` zdmDQTpi(NsdCpIz)aY!7&nLVFy6ki(XUg?U-2VGuWX@@-s}wA7H1Z(~zTd|Xz_=Yr;$ z6VFreBcyG{skT9NoczCJ`(f`!DSB`*{2#@>D}8v3T1}7t7b@Ga1w{W8z5j{!otti~ zf4)ComPvBz`XJOnN52}T^s5&~ruD02xfkSjIS!GPw)H7|Wq-EMbeng3t)fnG<>lwy z$lI}DuoA2J_ue@PUjAc8AGieTMkV)n!#A5(Sb1HeaG9S6)(3sOZ$PrF3$|z|6J=d~ zJ^`OXif|#O0?z&)%iE15vDLT~A-3&-!O5T?2B2-YKoo@q`Y5A5A+hS!N?tV_c?#7~ z@+!U2^nce1F}dL6W)KG;h}4!_ff;WF7%mY31RJkHP-e!93={wl0ujIQQeSyu4lmxU zP1%gwdL~Cc(z^pSr_+{2Yy?TBtvjbrDsy;G*|L=a{xP?ft^_3ZGT%Z1cFG)`j*o*4LN*oR?A{>6* zbYq-;&wNHoH7+eTR4Da2EEJ{b&K^-AboQGWQj#6E2A4hSBF?B6e=#J?CocOkf&ASU zL&A0j|JQ&NDUJ5*UEhVt4$}gy@l}8*`@}ya1W&PzbZ15VMr*uWLU{Vt#QNs)AXL*7yKk!DJ*3xF0#VaQ^3Voc|03Oz(QVyC?j047z5{ zv$0+CFD*I53UAAID%)b{tp!b!MP0V5PTQ0J~9FXU;XqKL+&QzCV|Wieqo-k5ORq? zUi4|m)l$0JazMJkyp{%f$fJ<@^QIls5czJe2vFb;fH z%WiQN;KADA2B%>$iYJ50v~t27xuUoW*GcmBnBl&J*2uXW*vq_%TWy}Z@bem~<9C3= z#9N&%K;vg-%-5kr%)XQ1S+X4k+ZfcUyG;+vz@i-P3PymR{H7QC)#`Fh{}bdzSaDd1 zH|$?wqZYu1PbmJV=5-=*Igo%nG$(qCC;B3q;-pLX2&;V|^$ucELx#ddhARu^&iJ`$d~HEiaejFsl8c&9{|~VLIJu z&tHA#JhL3YPbO4{t;BstE$HsH(=Smz`%i;iMZFG$e5U~ zRaTABR^hB0Hbt)o1%idUx@yN56a72`f?CVj6>Y`dVI+Ct;4my3WWbQ#XRo*bjPu)cQ&e)6{o!CoT;DHm)|}^I3w6JRh^`;{2cnRCeV0pHv1x#N)**Z^!6sYl5h#GlxRNFNNd+A)3o*(w3H&*R=FNF4Rms3aFnB-7@e{7c-9ETd$ z!#KUS=Tx*LjZJeNxpL-dgC4Wf9A#ONVCRr@1o4NxbS>mWgJ{}J?K4?Ma}%k`87jnZ+z zR_)Ntb5>?Rr3`(Np-$8pVj%#^r>;z|7wPq07ktO;OTTlcp=_~&7%9M%Z$j~GFZLhI z&K*5F-QSK{oSxzvH55E%s>clV5J>Eu`}BP(HUVy7mzY=y zv3&>S^1<_=gVa~L!(Xvxk5OF34Y^zu{hjkE^0(wf$rKQbZ$dni{t-`eVucz9z0BLz zolgyX0<>B{P#Dg~Y*8#=EqER4P>^ZZB)C(Byw-wE45-2fQz|>c;ff_tU&`77wV=?j$hTN{_Fkk{JS&XDZ#^|g`;Yhh!a+n0Y) z*JS8pd{UaG(_W}k9!g7{>AYhcCkBU++AIeK?l2@!cq~wfTw#_^MfgH<@=T5clc$^4 z&!9a9Lps;S6_TfgI*sy~AR0t~Y_0j20cQCKvLp$g##68T*cH|@df*rFo3mk2*e-Iv zs-a?-TaXcojjcfe*2FP=d1<)w>2as*VwO#UEgBE?fup81r9v$zsk~e&!QwWo22T{+ zwY7VR^+0?`oeetNpCxBUQ`w9?3tisW46Tga0UsknjJ=uWS+MbPlqO6%M}@$oe`H88 z=_^3WKIc5nr&8Pd%~pHw2UYszEmXQOf+n?9$FOG8br4Hh?$?aHgSUn+mth{#O>`m9 z*wKaTch7|rn@|8gR|>ZkzYK@9&K>Y)<0R*qr`2|b&v7mndJTYm<*T*e9}p=D@BdaI z;611p?+b|cY^3UAPs+$+M?Uo8+jX1I*zA4{(ht~1S8cLZFh=X?*>H?+l*i#%&1!ZPf>flNk81 zUmr^RO4&w`-4khjFQXvabFjES43#t0U7P41KQ=r-;Aj^eS-|vi8QIy*|UYVsiY`jhD8H=ODP@Q*#vEetp4qt7S=N9k0capoUc&9dglQ`^r zfnGbc3EkwlQK$eq-wr5HinHjH8 zf6y`MJ_#(6rNaAIY9vnB7os+SF4Ymd80PUQlq{{*>Wk@Hsyx(h{jx}4MnKb^6cWE_WUp^HiK-U69|uYJfn z|3cPnaFRQl53R^~t-NWfW>ZT^EyQ2~9kkg1>l&n}L^!89z9?pD^irZR#4PoS@?T@~ zPUl=w9=nWn{a)tU4EobyEV7e7L{-rDaT|A+eVC2iK_L=cxCu%1L6?|pJV14&tsGX8 zvRNe&qC}sn@u&te=G}o}MG&4KRe2$o#F$)Z63~OThkqW<5h@bK$v={B@Mz?Xi9kfw z=kQ;ZUa&_<4qEc#gNRDehe-kUAI=e!(*#^5EIdU-pKU1{=r z-Vio-@8i5_XyzA6d(bn7fYbTY%)#JmCmH+R@ZEqkZ8LqKCY1S+`f^d{&Yh;Bra4dt z*a}JiJyJi9?SiWn!}B6lz0te5Ef?2$=FYwIrkP6^cUViR9O4N+YI|m`pNO5{?Ug^iwcfiN0x`84yr6Za(U0k^>;;2W=~Z^ZAP;= zag)Z1q(?=VMZg)P)23tP!z}HNX-JzXievLbkah@3TbXydcpy?Qa--;MsluRAe^jJD zRkfLjb+Z9#&&drXU25<Pih6Q_*2Azz7Ye5IqN~-X&ZaCRvNG{Ge zN=S^0a0yGHaBpbQvM!i6rv<1c4b}YITry#hEP>d`_4g>0xZ+|xX?6(G>|Ho!05Qv9 zm^ZSRF3Q8?BW^e7zptQ=0!x30M#Lm3L<<}5&XVLR1vZC#VdjJk&tShax|=aq$=qan zYhKpTZdu2tHbg(LAcM}!I!k7{CYI-AUBn><1?jMX$3yc+7I*fyW^T=yT8uS+yAfGI z6itHkqtWR`+TO6*O!^8~&+zERJ222wOQl0%s><&ku`f;GrNAkxxR|rFS?H}B43Ng5 z0tUp@h-k^rl!OH>pn|ts z5LZp3n zSYL%DM3-3l3C11wgT}bfZTmGgKcbV0F30@MX$*&>nKjR!t|*8v_D4OH6Pn8gslCzV zBsPE`B6mssE+?mYhSBXfvma^zrwv(aoHi7(y<+@)-pVFYiNV6Yg|Z3f4ZT53@?yCH zu(kLb4Jie(zLxVhUb2tN&YoTsNQ;|dkusTW5Xl}T=~NLMI*G{14Cm}oFu?ImQomGM z=NAkk?%~*mrOI!cw;>8&*f_hD{1W<;4k_EEYi0=Q4UU`#;swQ8C%0TV#UICi*zyim z7I!(ndl5F<33?Fs87~6xmyV;I5nKiq#$<%!ZRF&4XX;Q zp5uN7f(Moa5ubTS@@H4zlP`rW7)s|YAx>Q+a$zm`5|WLa?p>*@I;5?TGo`DW%Cbt! zk}$wIQpK3Jpj_zY5C-LzGt<5Bn$i`seI4^kafd2hTJ)IS_x_{u*@e>bHC^P6+50yW ze(6H@A)|VnM2G|u7UijO3!g=1J?^rVU^oqvHmdygo0-hbEI^eXu~}Upwo%YWF#fl_ zxE4_;+aD`RtlcC$r>HQsya%F|g++{t;+R)7C^OS4x_d{pn^u zMKP7RMtWyym|@D5jt~Mp|3Z(52o|~ELIiq9O_nVS>Tpl{VFMvl-UcES67DlF;U!(3 z!brlFC&`1*MUu>{A~Ik3FT^VEgODWZ(G6(~Lar-NOHjp|N+rRXb%aIo5+m}8P*~;T zl}N1=j#XWRTtr4atsC?^7JLluyVk4_$=xlXrxu8%g%^%$@SYPMDYJMAq+NYNV4i#T-;Yv#t3BBrT}} zE)$zf)yRS@D+!5c^-z0}yIB^T2UQ58h5{b+cN&4kxSbhO137!K{ z2CMY>8%T(}!D%>yLxrgK zz!i0uQNtj0Q(uH*9BzBakKWRtvkN5-l6ZBq zHIg++9B0Zx(Q8_t!Qr9!yzxFElEilph4$@NMXNz!$*Np4HnHV;b{C(m=adnXtOS4SyaVe&HrNJ ze-QlF9Kft-UyP^&XP`jZ7i-UhkU8(9BmLRm5HmUhr3JG~F<$;<*9DK(>%$Tzm-G|iwIZ{BRTMo+^I+(#Tox3nXHYtvwON1DS9{hqJAVR zL#BUs4d@09!XGt6*oF;UgfYeBudFu-ZBjqIZ1%!P#41Aw% zIc5pA&)SD`CeWOOtBhc%8I)hJyV&C^tLy8X<=6{Yh|GG#hYRB*H1s)hN05L9Nf!3b zCV3~1lyTBh%HKdd7R>Rj3uz zgld*-i&(1LrodJvXBR2o@`bHL-UxB?mk=aN#wRSoYK>_&DK{j~pwxohkL7G_pL8Yv zUonK!*n-eXx8@+Sza1WC?Isu?OBIHu*o8}M5u!leg!%Nv}A zXc)Y53vmpcDtCu!K-TZob2?oh#FhDh^+5|Hej{xJ8nNK8oXe(*rP2(+DUxB>4ybD) z2-A*~up~TE@<`GMvQ>ErDL=rWXi}{TX68%G6tHF-PPvbH-GWi&gz+R6ndZ}RxW7jX z=B*&bkc@bO+Y+&tIS+ zUgxRcnWz(Y0r8Y|A$KYcl<=IVvjQtyfG$QY$4T;z?QOV^INzhxq=S75;Kif0i3*ha ztsa?tE=%ISlgV%*lK{%ypgGOr-CBCLm)@PFcX#P6NN-Vk_mSQa(mP6e50>7;r1uEv zJxY4VOYcPKoh-f6q<5zDo-DnmNbel!JxhAelimxYH&!nItHpRzR3ZzV?QTHfy(p0& zeFMh;yAv^(OWn9gOmL!Z{6c$RY8bwT-hzS)Ybz?O#F-;++qr`->J=}>Gh>6sjiFb(UHDV%~{RU|>CwkK`^(Cf8 z#3T?ChGD219f>J{m`Lk3F^`z)64OdzvJn&ME8fr&(^+C-iRlqBk$z925o+NEk(cNiV|IMsqwC$&&AXU00S0~-dmK^uXhQc?rQyT+%cX9vb- zr6;9~36$b|0S819l$@Lz7n|woFL|aY1PbilBd~E+Qc7lLXJ*qTQl?<*3~WZQXwj3H zGm>6+ISC!2(o^F=1cJk))bw$#^cFocGGjBdGMs@udIS#WM}>>7xR69w+_-4Tno2?( z$Qk*eB3-Wd5Dyt$@e&~^*jExdBr!H+jEe+x5xk_R(=(j}Kk3tzLZ}PgrVetAk4>YJ zV>2?HX|d_xVh^wpTn5fr29kVGX0C8uU&Bm-@y94!gb+BrHaK|-2vok}A) zl!QSxRU|2Um9y`WDUvoAkurwh-l8XAb+%K=piHZlAczNR8397TmX)|mQUXdw^g%#Z zx+fr{s0vB3(vOr6Dkv=t!3U@Ica0CuN=QH;i5%l0Zc+~VhxT{&A0UQ0gQB8BBSqPj zBv?r~l2Obft8KPEJcr&y@L<)}p6G z_H2kpwlgg?1HUO*Y^&DFe@{#WARNa8P?Z9y@%(9bq!! zVv}9z&a9T%&e*uPtnoyms;nngSR=0SNtuIOlJ|HLI?I!KQVIz&vGR+^il^+xyCPz< zLAYe{MjpXBnSGLllaw%-K#~l|;i40h5;Cclty;Ehm6e&4oY87@Ql^uz8!<@gmT)mO zHa^ldDL6aRl|hY8uMlOTMMk4+NHXTpEEI*}fnu6EdaNrh(}P=O8via8NIW9FTCDWBo6x9G(4aSZJ^T{`bvX$YgiAzdqk!pH6h!Qx?l`ZQnlsl+I zAd*p`FeR;+l#vF8#g0yPwWQ)=Q-~dWX1D^=lH#Py$Z=A^P`^YQ2SQ23Q={=k3Nq9& z^l-8(WlUyb&EOd_fjubIbOT|4$3Hq%Mw&rI0+m>TzpQwPx~8Q1q=Fuv{6HfUlE_88 zaTCd3GUNg&Rnn5?N=Sm6Q~It76O`1sf{E=ieIqf8}XtL4AaP7WvOJSkjN#pl6O(t=QP&h*qt61sm=c@+u< zl~jcvsGSO(=p-c=x>wf6nXyC#)x`?C| zXNRXugcfjB=2LEf{c~PHr8Wpxnfn$!Gqcm=Ix=KH#DGE0@JKOqSa@XbDsqstMOQ*> zR&r*TOHzm#)FjvFG-%ia&v#`eqKK*)6do2U7}S|NC#M0zSHBB~F;Rl)(*9xBC=*lLEU)|9A> z#}iHtlu=RcNPJSmuVZ^>W|PK50s~uk6kSG(p5(g;if{j*Va|{~F_Hb8Q9;8a1_X&D zoUCZ!D>WejH54gwl~yF6j8hA#?JAiOW~gg)l!U(rkBUgDp;=L0Q!-O!|FX;tj~RmS zs7+h+%!0Z}N5hJwC|OMOSjaLOl1k(yGb}xId~okUK~zPn3jCA^`Jy;cq-a(sFk&Vu z%=1f%Ks8y)_A~>fc*4;3j7S~RHaZz9a3X1dMhxifj2JMWUrdxUTpZ>E)d-!ystDpY zy3#Y&H>736j!#Q=1&>LOjX=98DmE!SIy$s11#L|n(6)4<`fLlFQCZ0?l8P{c#*D5R z25D5dA-)>XRoEj;4f{~kw`dS~8pRY9mzt80G^XW*EOb^fv!%u~X~4W-4PrnWv`j$z zOA0UP#!6ADlA|i_gF{u;a_6flq(rI&JhdumxRbOzpWOpVsd0vdM+^=fyo51cKB_rwRkf4x0q0Zp&!DR4TDnG#< z%m%pqo=DN(U#_K^Yw>Wq(_3=_^{L9Y*T zL*hf1Cw6j$szP6KJjMXz{Pame{|IGuJOp8~E7{ZBLM$?Ing&Xmfue$wGBZdq4@*u> zO{Y?bKuL9HNNjT4;M8%zAU$<-ER`}^QY@*Nv1sFgCuqwg#iQ(nq-JD7mB^u>H&D!^ zP-w8F5qXuHc4?%8D|P$Y$d*|dE@vi*9WA{yk^pohtTM(Wr8%W<$#ZK8oJ~!Wy2^t@ z=YXie&fuWv@DQqw6mxv4GXovNxJ1&yuH5k!6JwJr%R<}sO(@ty1cu2q zC6$q#k{LUhASJ0HS(gHhHXhwo(WoS-wW;n0vMp8LL6Jj(qMgy>+2o55Jl+b~cmDqHb)Wyi4&^=8?U`cz9u9Br{ zGE&L!f0Ct289@D?4*8SV6bI*OOmgegqo%sP`uhr}baC{=Ad{-ZDgl8Mo;H2GIrm`VZBS>{TE9>&gqE+d&e|V&`PfS=?|DZ@oGo$@iQI=#s9x1Bn zhqU)3I-o&=0uq{@4z)-c*HAe`mK!IfWHxaTTZldw~=8!0AA|voayt>kX zu-q>t+(bjOQZPsj(j8r+1o`QlC50pSREC9`fR?Tv0wWGD1d`LM82_n;RU*cbFsw+1 zLeYB*Y%H5_^LX3N9vm^|gjyT@W@*$(#=H7B6!P&;=zu6u|F|klbau+${eri0xv26djT};SQpW{OnG)FeA0i*n z4-G8hKRPx64IQarCD%+S7#K+zjkcszs}hD)`0FqGBQg(hmo#*`JU%UztVu*=O9QO( za0WFlEIBI!B0UMMm(fybb5^$hJoQF35@$#Z!I%WPVT3E7N@klDJyAJkp)f$YGTT;s zfsUTO9`F!dX_<+T1bO5v18&vWO%wyE4uT>g1`I{r6+(u}BSIs44@QqV1gQ*irIEI4 z{1B210!zvL$53*a^E7!YXEds1M6N@tFDQIG4y2$Xr_}FA3 zXQ)yzct5WMn8qZhFYWL~^m5 z=$s&bzS?@E)c8$GaS|FOrBt~{WB5{d5~=KsG>74hoI_6*hgAL&GiKT(Am$1nc9@lu z06#Sz;ztD_OLuYrvjFn|3jiblS*k^jNg%s*asaac^8gC~l!Ao(_YceQN|l$lw~tz* z)#(ieqseTxSgclGUz^?T@beF-RXeaw-Fo#KG-%kUag(OanzukptaY2V?b>(f*r{`u zuHCx#=-EpM3JwuN!+Q4#@7pgTqJQLosDXo`2geKBb}p0$GZ{|$0nzwrDslj zeaf_)nX~51o4;V;TZ@-2`+%i5Ts)^l{=6t}$_IJWP+Cey=_vzcq)e2VvQSpam$Ko0 zN(VMM`cnZ^EvhyZNY$b0QuV0%R0FCZ)re|LHKCeP&8X&73#uh9>S#^1q1saIsPP&T^x>DV#o|HfZQz8{c^`ZJw5mY1)GO2o>NRQ(o?GKbM+A<$>}Gskf;m)O*x&>O<-y>Qm|q>TBv-Y8|zK+DvVw zwo|*Q{nTNqh&n-?rp{59s6VKi)E(*p^@J*?7+OVZXd~@Q`_q_?{m;)@ESvB=7w$f* zFg|&XWow@2ex>cra?Ib#PnEOV{jk#Z&htuRIoa&xdB};0@>5pLw!#j-Rl&-tlBga- z`SXf^Phs#xR~c)ynEsvdbd|%UXLo_U6!_-TyHB5cQm=~bLKP0TpI4cya`B|fZ&kF& zMdin%f8(Ljx{{=oK_o*}VpVa~@Bun_9;}n8cq(J9u=o$ZKbBPnyjga?B4k{&J2DtEG9$@4s^5PI@m%|~Sn zm29mD@#1f_K-HYCPi{RtW5VS3(%$=CnD+I=mSN5{p$ns82K8A!rgK;CRljdFXx>YA z7(Qvf)8hSYwk>L>qi1s=W>IhNhO162s_Xc=Whc|Tm35Bv?qyb`ryo^&T^`ujXVeda z1N8OhY#g39+BNpG#eKHK&-@@YuwPVg!WVIUdp5qA)1-sfcXtaMs&RdrIo=Ncyp8V% zK@F2uwrgKIBPVfy+V8Y`s6jbY?A<)Qo$g29R!y`iKWwxZb_BPuC+yzpYqSm<_RhOa zTejGBxLNGRteA%NzVFef!@i*oOS9rto$IzsOiu_H*}sv0%&M-Ry)s&;Yt203TesQg z;o~|6I@-|#o7EQWW39rf`j^t{nk)&ke$q!w>1m8~#&l`hy4`kHy%i@@hqp}azPR=` zXRca|sc94X$9(T@I61v>Q+n5fB5(WnVa);-e14)qvt>Pc)mk3XLZpl0qg2h7(d`_) z-;9jZyL0O9Ue%;AmvC$&OP_1k*6?Lfp|5?={Mz+b`F-B7`5z%eyM8q&!_n>gUfo_< z-|h2};maB~wq!0Ws@rHyE1iC0-3x76Y;0+$vymUI3*6YHrPY>0cQiBz3JlNi&+*MU z+?esoXjf?DFAQzqmC>!gU}=@usrm0-9XrgtEW8qSxN#F-N0*LW(l&8T8h(DFR$a&J z_cFZ$=QJ{PIOj+Y40qS|3c9J#(G$b_1*+Q>x>q)9H>`HOkc5~{KgM*n_@;I{+@e8Y zr-oru!V~Daqo-6=DttIj-VZWl*(<4@bx&RaIyUhnsIW18pY zzEPY1a7bfe?&6CrHs)9zhTPI+TDqu(-tww&UPt z6O)q@`1UHJkFwXIRV@3ko}c&It5>NVIX_3$i(4Nxtz(OrX|0B?ZP&yc=<1h~Kk@C% zoS4o{bZc+LH1O)#yOv?nM7O~>-_@}D{7zxb9B;l|-&AXrJJ!!UzeSIpXXt@H34u+_ zSxetETRurMseA0qY0XOehAUf8v|CZmu>5oGS=m$N6V>BKl`j8i$oa3H=kv>e!|dDT=We=}!8UTvfk%7ROMdCiPu%y2 z&zzi1?>=(hx+od@r<`)%x+WQESDE{+?BVPDyU%XP@ixfZb?+)P4ZP4e*Y<(z;g^+9 z-M6JsISFH~yN|7sV|eeGyHxhDZtgwz%}bJP)Qn^99T#N}wCswHhgHT(yPTXo_5QrD zeapuy-&)=?x5b`w->g0R!LxI;*y`=0OTIYwvHL;}z2vU@99G^ThD`-GpPxVL-V5Wv zxD9`;{rSlO*wZtLpZ~V|uU#<4W&iqg{~q@Nc<_DolfS;+^5|FMVc$ddO*zT&-`#az z#~qIF(0u0p=Z6a=BR%U**_k5uXRv*3-lekNf0k^m@v9&F_>q(v{lgP?aS5Dra;7Z2 z>%MYRGS=(Ap=|px_hEd{AAr8srC`|wCGJaCBx8%XpUQTgc3&hO=rZ>S8Ha;3>M$vS zoIHA+`=V@q?)A9rm!s}NIIPiJytjSxlRfYiZdi5hqwjBh;l7zeJ0CqizEKK!=au_U zkIBqh-hb!gpLR;NwCzsW?`I@*_P0CZ-u0uDMrg~Q@9h8GeH9<{Hmu>4EORb=_M`%x zf+>~g(E3W_&-JglZ^@pQRPl|z>@>2{gKY61 z-UnT36voE|ObpIQ1{>DTU4Ids~!r+c?OT7k$vAAj}P zv6JrAh^|rpkBh%q|KK~=((TVa+_U$|Ss17E-F9!|_NV7ywDq2OX4%*Gejpxxxb);q zsl=8g?_Pd(>ad##vw!l}e{I}Ret~!xc9-GqF-k5LH#Oi3+v@_SKi^Z>F*9Oh{u)V|0{vEo7 z^{wB0SZKfY-I<}oO#wq*snD(j6lz2e3XdX37Q5;Q;`I69?u#?*mMA$?kGYSe`3qtZx!n9zgdk^B6g!J=IU*E)T^EJFoOJhrPs3e$+LNzd3EngubXf8I`CIG zc1#F`DB}O-$?2uJc%T;?g~`jzf-1~8vEYM@$6}%h2C;WcmePK!F za-kRZfv|VphX}t?_;%b!h~s0yTJKZD^OA7Xn-NE5!G;V3@E9aegB_{N!82 zyIKg@x(0Et720fDhxoq(F5e@K^}@_q8<5TqLSVm*NNbaDjoOU#HVa-~{D?HS2p{zP z3F&SXmhIb$w0{;Zg>FOog+h;wg}`CEFeYFJ@Yo@!vUdWPUBZtCb^)K=f{$qraM~kG z8MGI8?G^CQ6bh|r{nNoe~}`K83uU7S4=2jr^S!ihKT!JpL{OY0n^^X9VT%XOP#k!tjsJBERRr zw{ytzIlx{Nw`ie^Gey>P67tqHx%733Rw5T-`y>bk&u zbRG1%F3j#;44M@S%x}e@+YMpf_#2?z4WS-$6ZE?&TzK~;Xn0fD*SG|9ED>&ODgiBT z36Z^Tfu6S@Z?{0xKLxe(Ptf&GA-nib(Dt@4DD5`rds|rf@HS|CM;Q0U9nkrXu(kXS zXk99NkW&hJmkMV3E@*yNXp(ambiXTHeSR0T|4WE?{V&k}FCp>4U*N$#K}fv^KHL*d zU%v-l+!wkz?}H!rg|R2@gC`G!)V>eEmj^=spC5oX4+M3ahv3gcVeQ8c!J~&lFViFN z>5=gB%tzqWBcbixN8s0E;iK0cgJ+Kg?ZL<3+Y@1W$0y+36XD6qC*U8xy`O@IPX%kn zQ}FSru;cfq;ANRGH>eE!EEC3lQ3jrt3FFnzz}IKOyJ^qB+h@Y{W6!|f=R$nP=iu>k zLI2)!@cFq=`uI6`T`us$%fat*VaTR(@Vs2OVs(S>ZedNP8@zW5KNq>d|H?-ypZE&0 zZtoK0-FR|PkB%P%p?n1Cx?c^-zsLrAcd`X@=H|gc$wF|CjxoU}lg0+4{0H}bGCx>Z z>)qg!<30+`zxYjX+t)Y2@2=oUmZR{0Hh4svVuZOLyf2mtslA*J`Qnl~q@=wmBxkWb zgrWjNd?qyv>HVa6$f!B(LX@?-hTPpIgq$4LJ0z=4WJvzS!6E0rd^M!)>!U-W2PcJi zcS;LsSa(v$B+Imr#CbDA6y9?}CN9hiS#2u_dGE7DA%Ptihjcu!G-O}w@{m2xK16yS zhwSS9Inw+pWK-U^NOxUG+bipl_NI{ieSSjvg&~d~cLImKA^SQW1Rh61rvCgZaQQ9d zdera0=X}VfKQ95NKSI7*d;@s>8Ilot7q~qLIpKZ`{GK5#OcxGTh#mW|qP+(%THC3_ zCQZG?0d>{lY(K5I*P<6q2BYZGn8lyGt)j`xCMK#J;%1ejTHy#`Iiq!!J^z>Y1&ExlTc9s9Nw-->B3?u+dxo=NE}?wQh6oR{BSti8Oa zn72w0cl{JB{&GYVzqk}8_IuDr+~n0yyi=>cSkiug_-(&|V%xZAG5d`eF=z2mF>Lj4 zasR$oMdj6zB1Mf7*ZGeY9bMza&chN!pGk@0qIbuN`+i6k*Pcufdp}7N7x-m}Q+sBK zj?t6EQFF4zs8w%>*N;vW>pz+u-p6&fgS|d))$m{}kJgx-EX2e@7g)u~ck( z<*wLMcTddjc3=Es%meWIp%}6Kkr;OSv6$xfRNUXEOdL4znW+5qx%g*MxmeW_{GXYK z_8|Q&GD}A0*8~8B3bR8LW{0310J8w|0A#+c5U>ld4{!)T9u^<~L_kG672&BD`ewB; zcUAq*t*rT1v-h%Ke$C#?8~pc9XwT914U7KLcag-l=kZ3 zee#pE9ydw*4o_*Xoevt1Sh(YlUZcW0HS*PPmGfw>$gWKtdX<7=ybONLx(!Ge(z9it z*_&sTK9)MIdJRo_C9Hh|f1_5dGX*s4(EHVtxIw|K>(#PZ?X~N-35kx+NPaCsXxqGT z-6k#C1@(81pEzO6h$yjp=Z;-^gbo~;m_8{pb!_ag!F~Jmiy1z8Tw0cgI6TGYa6>qB z+qpt^8JoinVcW9}BxYS?_AwioRm?&rhe=_^FhiIyrajY)aWF;(-CCwpaaD0vaa6He zQKzQ?MK^a3uZ3$ zw3_y&aq))qS4KU?%;sNIDfK62Ig6>Q)Me@dW<7tWPEo&6$Ec&22|bAU&^;(Qg}6!W zCtP^85i_OVQ){U;)GGXaNqt6rLan4$Q2(NqVOI5BYBA4U4UjhC19#l8X26w`|aC^)Ux4~?2OUxTL!whm`%q7>yta2SH5VOnym~XaY=Glrl zXcK0mag07@r`4FJ_5#~^ls*OoAY&9XTsXR_+*gnR~|h@OAjsd=MYSC-7PPLjFU3J-?H` z! zdsRnOzo{;%uB%E_4^=uZi&rhL`d+QPI(YT;61|3bz2-H>YrNNFuW4R$y$ZZO_4?ZD zd#}x2ySxr~9rHTv^{3Z8uV-EgZ;iLf+uysccQ@}K@4ntq-miMcdXM!^^Pc5B-}@c! z_q{*${@VL{@6Fz~y#Dek^P;`g-bQaf?>gQc5JE(V7=(yNh+OYH@3+0*^Zvy9EAQ{T zH+diO{?+@8_a*OJ-hX+QdDA{NpISbRd|LQ)_UY-<+o!)ztj`#qG@pq+GkoUyEb@8R zXN}JWpPzkp`TXK@!sootRiDQ`{^53n4CSL@Ukb#rxFbvJd8Izl~2{i-@vouz(5Jxe`by+plS{i*tE^-lGE z^{?tv>MQCS>c7;F)oP7VkX|8Fj>81(NY*uem?^7R9pH^Q`7prfp6&jVspz+nz z)il<$(R9*8X@+Q=8kZ(bGf^{LGh6e%W`*WU&1%hN%{I+G%@NHXni9=@%~K7h_0gKO z4sAK^LcI!>?GTlKZ|4fI{~ zz4U$bk^13!r#?}iqQ9oQrF)<&)A4$>-lF%@x6*ge_tcB}0s0vIYx;QoRDG^~f&Oj% z2l`L+-{`;7@6jL9pU|JtU(?^xKhT%yjRu>cj-ipEt)a6a$k5yHsv*`e){tg+!!W}z z->}H=m0^uxli_E>e#0+@Q-FUKbGj>_%wIYmy+QBL2kM*Y+vvOM1^rcVOgGFnylGf$SYi0g zu-dTRu+MPBaMEzjP;9tucw~5PFdH4ldd4Qk_QtNp5M#J;q%qEzY)m&!HRc)@7~eLo zGOjcJXe=}yG!_|uH(oT}H$F8oCNGoO zbkFq6q%d2}{^kbeX6BCO?&eT)KXbf!tU1G+ZJuSGZ+^%8zWH18_vW9>JIsg8$INHV zm(9-%3ZswFVDvZEH8wN0F@_rZ83!9*F}jT7jG4yQjqe!WH-2pV()hh`vvG%UpYg2m zva!T?*Z9n+F!`7arpBh0rcS0Fraq=f(@@h$(*)BbQ;unl=`GVz(@N9lrfsI(rX!}~ zrVFM&Ot($}w7%H#WC4cQW@dZ!m2!?J^xOoiLp-T{Yb_m77?z#%wazGS@e^ zFt;;Dmu3Jhi4=qhBtt_1_ zJuTsu0hVEw*DUD>F#{pqMu?9PqR_I(@{8q!<)Y=9<&Ncn#mlO*+N`y#O{}e~ovl5s zG1gbD@z$}{EbANAS=Ra153QeCzqNjE{n@(9df0l*ddvEkwaiNUs(p>Ve!g{lJNS0< z6@B~q#`wPK8}B>T_p-Ivde{2Ms_<3$8hm|yoB6i!?dmJ|_VXR+`-<-<-)!IMzVm$F z^nKrVh3}WXt9^I)?(;43J?VSdx7hct?;~HW&1?&>)w8vX zYTjc$WIky=XTD~>g+;}@MQ5>C0xb=p89P`aErTs1Epe6W(*xcII+RYkdjj#@aW{kDIZq2dgSr=NDSyx)WvaYf2 zwC=b5YCUDWV!Z*)_}H3eooJnIoo!uYeb>6e`k8gJb(?jc^@#Pf^#U~GZL88(<7@Tx z_ig0c!ndPuci$-AA-+yumv5TyL}FykVPRn{QiWTWf8eh`oWmwY{Ug zmp#-z-0rj|+EeV=_UZO{_BZWc*uS;^VE@U!*M8XkoBgc4)c(-!wsQ`>!|JH*XyEw3 z{)zn?`*-%O_MP@a_FwJS?6>R>>}7V|p>|jtevbBzu8t5#xMQ&66-S&S$uZTD>sa7; z+wp?;QIbzc@}g&O2^6?l>Mh${j{On_nHjMt*JmI{O9r_4XU(m*AJ`m*tn^ zH^*)viG(}*@xI;?PKg| z_KEg|_9gZY?VsA$*f-dJw(qi^vY)qKxBqE>Y%jMf9U4b{M^i^TM;C|a=PSD_}H<~R!1PC70+t~s7!DZ7`S&d=c&=-0%rm0usfNWYir(zt8>F z`EB$o^xNZi&hLufEx*6~p8GNWYJa1DL;vRf9sIlbhxteN$N0bMpXvX)f3AO?|6>1T z{-5}N<-gT`r~e`UU;WSdU-7@?|CfIQ|7QN}{k!^y`uFo6?Ei{?3PMaph&K`91BCd= ze~14;|04gh{+Inr{O|g60X_ld07pQBfMx;h1G)wb3>X?PDj*?XLcpYeoPaq2%K}yg zd=;=J;KzW%fc*i#1QZ9{4tNysJU~@TTg$grK&>{lI@JDlXEvNGrkir_G7We$m%&(-r}(q{dG0Iv zBIB>T$+c6?^ZJS@;b$q6*m3kl_6GZ%@@>^XuR8o@W`#0{Kc=|BI{979PUb525g({r zp_tFTq0q7o_>URfG>Wl?rTk3pPsL8!r3m6a=OdNt`9l60|E7xf`dqP_euw>po2_i5 ze6D=JJC(uwUX0#-toVVSs64^l;lE-n=-Fpr%&!$+OQFIzLk{m!ZDf0~A1E#}7unJ5 z24*=sirdb&WY4k(6$(HY_b&G_vw_!hd+`^j2xlhqUvn*0&2)b;7kGbF6K1qxD6^F@ z@Fta=|B~;_7*z+@Af}L+$F*agv(fxHZXo|a@gcicv5UFNrZOLK^_5q-c)lxtUNKVf zOmSYZjz7kK$@(e7xftazuhGm5j4ux1ZK|c*C}l8Lpt{P>W}=yWbe8IdYASaS`IxK9 z_fjwxb`#T)?a6(?{)=nG`f^t=j?kkk6LzO^zxpsov6Hw~{AgwiaNMZ)QTa2!L)nr$p!kiS$8Th|vzyuXn1<{} zoSMJRY+^oT&MC0ohbd+)d|&XdKR1V4z;vhEv03~sHde)`cJR@v5z2D@hJsa0;ifUY z_}*UUlwDLiITyz&PAdeq5$EDZYvTDbwhW_6)0j2PE2`u4m;5o6MRkS$3nNb>6*PN{ z9mBlMUguA6XSpc$CVNHEmD$KnXJ>JdjGg=3`yo?@Z>i`4xthr7HD-PXtK|=|Da^O@ zMka{0DN&{9%=~^Pkgu=IV74=-c$)c%Gb-z-ntHhuMy?(+of*N+Q227+@bB`U@(#|6 z-ALbKAF|E(oy=G47JfUwn%%G5t~jCK*ct45>;N`ES(`6m8$wQBW$H42u!orM*y-F1 zzLcBKPXo`dv6C2owl^?3v%{~gzh4dNOp@3Ko3D(0?Yv2q!|j6cYRv;EZrK~ocV z6nDG^@Pk+jdxSm8?o_I@xfmZX2~e$7?&sEVPZXaiyL$bg7{%lA8k%W4|fM^F1>Q zvm0&LQlI_D;ZyO*Np4Q?^U&CuObZ_yM{Tz;PyN9%abQbz{^ls~C+kG=$}qymB?WRHfwiDO%E}5Pqg&sbVRU$SlQ7 zB6&)Cy+Iag1@{-Ec{znckgPFXx@GIh(-)?k>5;zcl_}ovN1gg}>yh$nXU=(M@?QLw z4&CzvmVa7@QdH}Z8demsBMB32RCpr)=3JA1SF*Bu;WPPL@D|p6WNmuv$gjN(7JGmO zFE6|}ynYx#dYGNB+H->RD%3;#p^R+Oz)dSjF!) z-;tR`p}v1^ljADx6(c==c;YGDCV!uhzYCp$?C&4mFU)_x=wsA>^Py^We+B=q;9q)P z?qB`i-M>m!8jzj4WZ$k%+Otb`?2`SuWVdbr);a`A`*g`JU9v})?9go~?an28bIH!! ziha4gs32))ZYbtz$==+4n7bVy?aqy+Vx;}K!>N&&>~A{efhSW_sOi*9 z%n;ART=ARKTbMas`ogZR}+{@H8sswY^_oY3#3R;OdZ6oHl zYti*FC7C<_-53x!o z_f^IY_y6j7x&P_q{->AwpZ=fS|AY;Q|M_`&{=v)h58N-$KadN_%kvLjo`3N2{DYV0 zAN-#_|6pHGMU%dIJD;3|N9Gi{)^{-wke@1l$1wg1FNRx{I2krFL=He;+NR1@!0=@U*dKLFdZ-#K>REP5Px3) zh~JHXZGgQ166Pd;gu4zPVIKiV_*?*qgIsPz;&}%^;#v+M@qGdyajpW8c)tgbxVHdE z{5t_8je`J^&M^Q<>kNRTcLhMwECG;o?*T~KWdM@?3;@AlHh|!f2OzkRduItgZvhBS zO8^9~_W=aA4*&$ej{pS6&j19^uK)zsZvh0~bpV3%1^~f(Gl1Z}6+rOc4j_5h4Iug0 z4hmxn6ST-lMYVGjeCo&C4%X_|`j1mcGCIgB2fr^4S+(t@?J& zy6-n^+`MJ$w(UE2@7;g!@GnKjPMkb_=G=u#SN^zuqvX#!ckexT^rY6mSZ#67VJ98^EW4wSYpv zCcr*`KjI4nK?w20FL6j2=;p!ibcFDZ!pwV zguMtj3$Wo^xWrI;{2s?Qdy}EkU{>N+4Y&&0-Ud7dC>FyGUUf)m`hVDXCs|iNN*0p&qdle95M}e#S#1JcGbfRV<8ub z;7x)|Q$4<0<6FRY>z&B^9?)n$O^wP&99Np2_70WG<1|-=&K>oK_iWU zKYXsuaVXN5G{r!SdkRh`xeG6DoHH(QoO4VTZUdtRPFPGY65_LywLd zMtnki60!VAw#4-lacS8E4Psd+TUMb)?$Ra>yJUx~sz~<{n>hKB3V1j~J`>2L3ivom zK9W<%5c6@5xlL>Gb&7o9`UP^g7(UNRpArh>^P=Z-eCk9go~xek3|A&`E+(I8xCRjB zTasD6(gXL3;0|Wo5|WvonoS%_|K^y4yI1PRM1~J*+q$(xlly=3l94n9SG|znkN@U2 zDfWfn&uVy)Ze$}Na~Oi52dlBENhvkboK@X*JT5((Tpj6oe|IHVlV}(G-3bJgIJW5T zPFX1xj*E%ogbduRg;>Z#JF)agiJ^Gv6>`rAbyyLaL9WBdbOnQYo(o}a*7Mx2L6z1M zUDEwpRd-(eTK|PhFdjA4{}kv`B3UPA5QI2MpJWrLa0(7T)syA zf9$;pm|R8K_FvOIfg}VnY!dbc!VXDKGBcToOJ{}nCPSM^!s0SLndu}$CNu3Ukf35C z5qSl%K@?=Ofhdb8EsG#)vxvxMiwMYz*dVWly=4)U?SJ1@&vUxEGjZ^nn7`k3eFJ^+ zJ9X}=da6#HI_K1><=k;tzuCMoZoc`)I4t$Wg>%fh9cOeNhefen%v^`nE*boTofovP zOq%tPMds&w*`-hHf^PjLy?3w{ig|dyx#o!j7B5+Vg+-3EYh(7C`wv_qiMZ*IBZMA0 zWTkodP!md;Q$zhJbK!O-++i*WVg0A1DU7oVl1k{e?QKH6=9-Yr5OeunCRDu={e7X% zqS*2c{{f=HiG6rPh>#xviF_@(cw_Rh>5hiJpj1`r4P4g-_Jt#9lKNEs^{3P|`Q0)-Ima zZ`L0KpE$fFPxzgqSP1SLJv(XscQjUhns?+8SS7jN{AkSL6f?=>#>gT!H;n0}0bCHy zt?1fs&aX4Ih}*n6$}OZmuh%>^hU;rq_y|#l1xoim%aqboa{D8l9lhr9El?-f zVq-2EYeGG!dImcNX4(ty?JfGS&|`AhGP|Z*zxl^rVN*B|5%idgwp`tXC7rQ8Hfm0D z_h>9FBcfMO+6K(!TXvYMc0^h23q*Hri3Oh5*d+_EIRFOCLhnK5)aRGq3GZ z-{fBej~&?H?>=>)J>7Qc;u|Izl++)OZpE73Sp76<9ve3g*(^En)HqySZc#3i-iN1p zRnpu(+AV_i{hh<6csQEDvvDK^r-4~%ilez=>>XpcI{YKJE{Zr9>M*a3wwKqMFF{>YI3Y(L+nk!2c2YL3}x_Ldzdd=_abm7GG zbH)|2GYq_?re*<(Wc%`@d3Y-rc?*-~mV0|)E1M+q?5?e5?QUq_=ds!q$&Qt+ys>f7 zc5~J^E`n|DAJ=ZyP3SeJ!k+Z4w8y65o^iTd@cMDH%ujc=t2CKA_o07Tv&sB&AAFsF z7bN61yS?3R@8C9{x7$a!%@i%a%5C8dL@|Dr$!xhQ_AejLYT(uJt%FN(8af6J zN7d0|mlDRpP*{0RxWjS#sqiIzYAYja&Pi1*epC_{LBrONHu3quqMvqN`$&@)=RtKOUbz*=Gu*+ z8qZU|IduYS7!=GK$J>kO`SA#xe$5}o%PN(B8t>KwwjtuC*}lrWIUWJt!~oNG*kJGE zHg`9-C2UcwP_^j^KBo?=8?r>4wmU5N14V_WDe5;j)Nw6NTqeu=P}0mRxF;sD>{mzJ zE@*2Wszc3%3;&6U@bU~jW?#13SGmpO%MmMtwcBD%X!G4|XYlI2eOqn|+v4!w7zfHJ zo>R9qZ^I?~HeABE^tZLHH*IUyZYPRsw>9rWk^YAb{++<*{o9&vY=^Mkbv}#E=WE-V z@2bz2wlx_jito{9`U7qYU&U7{Q#ys)+*-?aoBNt&Y#A%6)vLE--Ds{n05RMi4zP4{aX)~8@-_>JU4=UlYIv}xv)irn$)$%M*}hz=WMSU)1Q>fZ^u@dJZOvqVL0hmOx3_@1 zd24$tm1zFB6B7Oa4`X#~bIuN3-Q9eM!rKLIY^S1{4;IY+@ebw1v#;9$fj-8d3y*V~ z`6EMc>*u=C_{0vf(Bm1fBK;Ocx%0MgId=ArHpedB5pLfTw=$?(R5^~vzHgSpP9d1#V8(mJn&$w+9*#(m32lJ**W z{UgYYi?(!$`}Id`;(iCW!d*1Dh%N3--KiDr=H-vLJ5UK#aCUv!{cAfp_jlo*d7kcF zJzZF@?*}`f>I)uf`^}H>9NcCvdmXo#>$%N8$!+dW+-CpGK&0NYi`?}y1Lk~uQ%Es>g@>~9fNozL)97YZpSmm_i*RRziq>RcXUlF zUMP_3?xyu^-qhZ=24G@J@Ylv*TR4r|^yy;|8JB9lYv=f4TfKhsV3gLuRqdv*Gb)*9 zb~d2~^FKS+H<`aMoORaMRos@Y<~Db&<;M`tD7&OA*R?jc?4mWgy&2rOi#^ki?t(>l zTd`nZcQRNt*F3q4TY1nFQC+9kGqmh$V`^p&cH@--PPsSel>ZyI#kcJC9qaNQx1|pd z@sABYU|xf{YB#KM$+xpxcbjJ(-YuwfU)T+mE?;_Y z+ZBsfV`<(7lS8@5orQsCp%WMNy7fpO+cmj*z}$xe`R|NHe7SRRIP6}C%=^3Ahd}eQ z-Q2^WxeL0&c?vAbWvdcD`r*~t;`5Xc&Ue05sE4eLR#ckn7+~%(4HgC5@Y|WS%=E>dXnKyUG`r+l5 zk&ZRyCwt6g8^ZN_aCKtj44=Brjx6cI)55w49}*Y!+IvbaGRxc*!OEMw8=0pf?p?^d zx;t()i+b(T`mO)(?BUG)=AJM&cz$~W&p`QWnV3FX4zAe4+`I?U04HS0 zb=($j*Y9m==VKkuG*8A z%h&fb_w9**Z((3Oc!5>_+#X!Fr+F9$^SATh40GL{<_YYk?{K?!?P;FIZtgBxQ?lFa zy<=;RHb0BN#(S;3_jCW&2z~!`Pje~`6z+Gv(-Ct9b~6uCSNM%p|IYFg+-BEXm%rNW zo80D3-3r_MY1|gh;WqP~tzZ}4Mob~Xb?hID;0WAc;`goU2Uc|rRAFAF^-Zi^`^|Uu znzaINaqZ1+_kz9bgKC4@yJRmW#(KY-+uS{t|JMffjd5@(Vr#9u6H#Y@Tg%ec+lhQMmEUbH^`_nRB{#;Y3MsSoV# zPIe3gPm|`FNvSmrs~gN?lM&Dz^ql?`Jcrmyfd{U~_I9_yr%-^3IDqYUw&wOiZqpap z?Zw;{>^Ap(a_L%b^Vi$$4O=5P_r8T^S4rVD?m@NBe1MKVg&Qf%{G8k3Ep~e=x4AsM z+EhQik4yD)sN+j;#<{$U+XA*Gw1`*JnG@~Jv2qpPD<(2-WEfs}FP&(Y+%-R$2+MzG zqj`+JgEe^Xofs^u`ye#ACv6OW;5PS+HO2g8qSR$)?u++fR0wZPbl2N^@KCfOzDb|9 zulYWvy3PNIzUc71ea#Qxki)!-FnT?=`R8#E?<5H1k$t&x?-TpZZy)UGSYe*t*DlKY z+`ewj-5207{et!KBDd+6xh>gkuEZFYB~5xizFDC`;3>42EO1Sa=j=Dj!THGK+-vkz zd>#5QZVBf0{oI>RZh!yH=TKv(d`NHp;X2w_eZV;eYUO!EV#Bf!(IJA)mYr zg5X-dd@@gV`m5l+u)n`oLb%0K=qGbJx1|fat8hoExY2Ox*E7%3x})WU_war-G?-rXBh^Lb(y~%VjZ7=<4bV7-a5Vu zy2;X4k;q#uod(L=K<}~J`|S2X8){&-x#G|uJ?2{YC|JL@f*!SW7w8G=^C`P6(tmi# zqF(c-LlFD}BjsOLqGPy@e>fXEHoP zdp~q<+hgzAZTdADxE9;|gj{W5%UCR$ugQiA<1$<4YV)IG1iyg`f1OSPuJza9t!CMUZeoAebn; zuuWm>-1y9>M5M4qaeS$!GzLM|XUMcMl}Z&5dJ#J?$%=EJ4AO$o5Cf<-ACAQmiBt-5Kq?hWMPo3mwyuE4 z)1wR97RF@i3R`BzXGUkn6+(qAGT}I8nXRjfM(`IeAn;O6Je3b+LP*FKxv@FAj4JJv zsVj~xjm>OT8k^lJKQ=S2v_)x)?3OwFm)SBs8i|zukRqgp_QIT+y1G~z(|4sYNmn$B zROQ3S<^rroViK89Gy`9SPDufT#V{=3dBA_U+Vm*svpXiTdqr|M z6Q!+U=`9gcIJ-+}bP4h0!bQYes!b%APu8U-Rje(9bD`p>%qRpu3IW!XYD=MP7>10` zZ(ZCnvu(T>D&ah4;5Um{5l$$-ZKk#a%aI$oaJD9z4##;Q6M_MCkyv(AG?GPhS-9lF zvEctarViqNh4H1)>Do*Dt`5+?K^~dds>x6s1Id`vS9(CnA)tDIm6*C{k04Ga8P@N}*^hmW6XR zTntBxHAq<~70aW9q%s&upAO})1tzeKMH88tVhu7UjU*OE0gAkA@VToKKmN_ZPk8}& zS-8fuy?5!S(Qaq3B!TVoeLHxf@MGY$`0bh=ee+TA1V*8gGTf47BKTL;hnGC_Qo87 zd|}$jhk-Q@HQoq-%y^Y)X91JApy|*0B~vpIzc}V4P`xtskzFxPMD%3UXFRMm|3! zoc||zjxPQ|p1%oZp0|5>om`6oVR(;+JUzz&oVHl$%da~*@jkHIZ`s~LrghcdY)yDv2>XoT4ejLMEL{FxM z`IE*^^~%&IK7pnrT!*$yf>poD(<^uKApVdQK{@{j{B~Mb47&ic%pd2K`2xcHZwa4_ zrs@sKb`<{AHf7qzL5I(XU$WX(2T;8-^>s0f?-D)vgCXM5ylsJAnSRqVjQKoTh?x&$ z{Nw600Gax@F!hC*#(Y8aWNMht8T`o9D^s7CWz3gEPgZ>qHmY8k`q-zCZ=xrwUh{|H zD^s6>=6j+iUj<$ZJNT!56J8lsrr*MR%*Qp_rJbyLwV!b*Q=h;CKt%Lp)ocDxuS|We z#h6CXlU1Jpkf~RuzAkReOwp66VctdoWa^cvkD)(UtLVwpP@lq2^~%)epy^V3Jbl{B zA7$#Ji;Ouz^kfZRZK$>s_+>8-$!9>rduS2& z&F=~)e!B7JmMk=C51PWQJ*)h*AA|Iwd6d^F79KMDfveLV^U|)&^B9A^NBol44B>ZU z=QMS!F^`B}vZi-q`s`;=cZr^?`g;Imo)_{P&@g`z*J51XICz8zehZ*^Y2DKp>F(2v^M`6bhaiTFi4y)yM# zXzD~yR(;gdD^p*9W^d7xhtp%(DKlC0T511O3hk|!6Q>MNyh4J5_C#yc^g|AF~{sd#tMsMvQt3Kn^ zEy~o#QNjIE^kmh47B-Pvup$2%8hfqX9yX5)uLBo_(Obd1L`EH#t*Nzshq~7O28~{8 z?}4kYwH$0%h4)fkYh*S$S6^!p&o*VIr2ze}#4q`YA^gU}<#Z|2Z{#G{j%HWJOP&VS zc+c_}hwb?)dik%+aLlO~J1^moRj*}?`Ke5O2^u!{GG6i)b>(;izqMtXOTzS9Jl&W! z=;@cN`aH}aGcIN7vu7C7Eqb!*)gJ1Vsn2{9@8F^*p9$7HQNK~-F`0gq={J7?>TvN( zR(%#))hkn81f7-N=RUh%rmooL~?_=Hp(UVml1CVKtvb6`1jo;RVp9iZx3a#pu zsV_mZtLVw9&wF}h>T{RiIZgCr)yF)&vJD@aPiXkyW5LyVdmrvI45tMf^3~Ar8Z>u= z%^kw4!M_t;3w~8N10IET5bD=~8BQlR_(N3?T!TA6(`j9iUNEmm|Cu5G6U<=&ca|~o zMc`^XGw{!#X{R#N7{3N{Nr+!EH52hm1IW}XQ(ws8{Y&&@YN(Imr+Q`TIUzZ3OqGhg)NqrugARp-^i%Jdt% z8Ru90k~J>1r-csq@gJ+d#h9B^4_1BAvrU=$$gP<3L-gd~^qf@W1<{jLpY_65X82iX z-WNT2IDPDPj6*^D7tbAeIDHYCeML_mPM^L5(@lt;Je)p~$GH%z-d{kYHaq}kyaQgm3B=X#5f?9cCb&A@JOXFf_LyD|)i(N%ImlcFaNr{^3gMbVRo({nzR{}nx1^_oW7 zuS|P5@5&3JC#yd1*{@7J=W2OX?E$O4=;@WI=bSEYh@Px^wV~P`&i(Rt(UVo5@xoWO z_CJI=S?vd_UTt9b%G7hdnD9<=4T4pl^}<)Co^#2J6+L-4J?Edze#q1-Q=j@RexfImEm) zFM6_up9hc`zB2WNCvXl#Po{?X6T?sS$~OGpWBxJ?A3U5s4$ZxyC#yc;g|E!;bI?2@ zdh&4kx+jf!TI~U=KIMh4%<$9DtQS3bIDHA4*F;ZNecB6Onc=7Y2k$tdC#zmFMMT&ANwQTDMU|J{d)j1!zXt_6Tv?J`aC|_b1Cd&Zdm+QnUWRbLog)+ad)EEDTc`rpzR(+ipzB2Wt z_c0fy=*g-tggtwNsn3UM%rf@gM%Cw*JO>GGBw=<&=%Zo#G`Onv&W8nc(^$*SMlyHAlD zpozdg|6(350P{OqEL8a&&2LXT78NKHRfdK84g+XDNnCVeFB;BUD1Qmk`hBCwF+_<}o zo;;kM^XW!KPgZ@_3tySxbB^8Fq9?09=joNH=N!F9i=I53p7Z&3i=M3dj2FJLP48D~ z%v#ZN9$?k$b7Kn~YTb2Y^{3RB^HmR4eF-u$^~%(9u3$`+W6LL*nu++SrdrQ=gs&Gp zc{n}i9KK8Rbl%ejzCd%5(Id6?N)SR z+1u&KsxP`=ZTQO6bB^R4L{C<|)}IVtnfmA%HRce}lU1Mg!dIp~2h9x8lU1Mb^vcx7 zzFA`yi=M3di#Y*{My7;VTc7x2^Eo2`&GQ0au^*7{a_u!Y4lr zuFhM$P6ct1cihjlv3!2}TC+PiVna7(e~;@uKFs4e9v|s3f*rElejXaNzY|f^tvF`pGZS@lIvuS|XPe)Jy|Jz4cB zPp?dU7MelPlZVsSJ%INt(UXVMr=dAj^kmg1JbRRBPZ63kMNd|}-XmJzpiF(~LEL{u zPgZ@@3tyS~$U`+|o#@G`&v<%e>T}R=7BiMT@*UvnvRCr_D${TF;Tp5;0nRU3S=K94pL!haA)+U%J{2nKm8mcOzQ!CTda~+cTa@+6)JKXa ztD+~XKI)}cnff?1OGHmrecID2Q(u6lQ}krj4|;m?05lQ&%fB>uzfq|39}JuSCgVLO zfja6O;WYRHPk)uicX<4;$3>4{^EiB9Io=&TKEUHfk7FLs_xLD}lO7Lx{0)zp51riL z&%eKa7n)AzY%T#;*OT#QYRve9TzMn!4X!S$$U2+PEeKzEsJMFISL0d(u8u2#@c$xl zk^eD7Tsbc;WuEuCXKT#dgPomZCY9y9;OUjAFGBNK(UVngymGE=_0QFqUe$wD9|@P! zu1vjIkN17ilT}{?kXx`(w&6ctW4@)~gH^Bf67|Z|mtLqbmx`XO`WS#ry)yODmr&=3 zo=gq%M>W;@)XQiK5p5;^z=3$1fnho@?qMcdwVAV&x{8wi9*}vA9 zKZ%~K`qiFZS+B}hl=YF_|>@94-uEy zHe{Ahc5#uv46cqV;-yQO`4EBrQSnPw+qAqf-;}A3Zyz#$5j|P;883Wg>Wk34FM9H> z(Xws*9&0!yRGMVQtITi;JBQ5u&@(^D)J()Lh98-FW$Np837Ka^PgZ@}tD}^u&+LwQ z`OsmF;gctWtMib7FdW9EZ2j&LGGA4{;IoJDoALZA({CgaGJh1mWCqQ2MYb--rA&S7 zP-vz&J1vX8r?#vo?* zGv%dA*`{l1$c&rn?2LdlUB7{Uatk)fLzVdm{HksHgR5;b4Iy)`gipQ(thT-7vBsMN zXuRZ4HW(9;v>fU2=RNN8_!N)N@t9!_W&aPMQTwj}(|*5><$6_XSrOdqLdR1Q*zhr8tuLF>&SEfGF95UY$J((KnQ{MeTnR>2?b&=@Fs!zZVnc*u_ z&vmn|6g_!3J=fQ|LG)zRr@io%89vwK%8Qh zOm9k<;YU6ZGOvoBObzq1h##4HW$Mi*L*^aPlU1Md^vcxdpxM3&VG65W)5!3ZsgJ}$ z=3vp2RiE(AuQK)NnIY38da~*Z05Zc@ranG9WafyTObyc;1(2y%w&BkSna^wZVAVhA z*+cG!CIbKb`myE5~t^eNn@#4lO( zdOb34m8nlGz&dpr7g+UqFMMU{Bk_Onm_t(i+i|RiF3X@s+91EXT8-=*g-tde0%s)TdU4%vqu* ztN!HC<@_OE1Wg3_z`q}Qd>xqg{rvM`^Go3(_(4zeJCC3Cm~jntFZ&BLTK-=LSKrIb z0P=9UD`Vs|xVrqu5jMkb!A6g%)^kmhiz3WAp`pBA)c~A6Y)z<;Yv`3lx=!qdS;iE3?WNK)SYO3|IFNVxC(UVo5 zgY$_&2<&8I|9R=x4;SGIZ#6kn-&uPueb$fo+q8TG*N*tjgVi=I z4@`?P^|{kS=5mb-tokhCBU7(Tef*4&xlQzB)ki$NGW98F3Zf?ur_Vt1l<3LB>2uJ$ zsP=pM96Zu5?N_Ef2~3Fef#}K9u&ieBQ@t|v=361N!^hmYAgey=>6NLELbIRf$*NBS z$h1e9`dlVtri-3T4eg10;VWBv&I+0NY7bcTTK*Znvekb(WIm^QuwC%zLhXNsPz`lX(pd>J&X!!s|0t!Aj}$e-8Z zr_l2{^55MG2!HR7yK_gL3a-A65?;K@v@`nMkol7MC99ovo?e;y7&K>#o~-(ar&qT5 z0L>3XpYZgb@bt<_ls)oIUqb%?S}%lD8L@f!nc zTB3-H+=7iV^(kn6AbPUuBc5KF`V2I;h@PzatfyC|K6-x0JT7{&>h-#&J<8Mb0CxuS|XBqL3N$Ntd@|)vFEED^nl)KHhUhPgZ@*l=D-W z`ZP4nq9?0f!>kTJdI{ER7Cl+@8YcD13_k_Ua?z7jzp?Nmmxatpq9?0f!>kTJ0nIt0 zC#!yA;n)2jWPT)ivg$V$ejJ)RMNd|J9zdo&%1m$FnPP!>kC)leMI!+ z;q;lS@IE4X@^Je2)wl<#{b1D>yytCY+8?NC)UX2`Yw zA@l`kb{0KZ!_Rr=OPS%Pe;qOhiJq+bw0FLgsW*>=%weJ@tG?jbuS|Ubnt7rptNsSh z9_69#JO2DmpF=p+_npk+A@i_=PyQ2lEo|YR##J0s&Rb>LmU<>+4w>olmaO`O_-%oM zvP}y#G0}73o8k1)XG3PO=*gsXOntf(GB1mstojImOxu*H&;B)J%q*9;WNH|G6hNk4 znfk(OAyX%MGBwoKZ&%incZbG)D}OO;_7hHk8-+9Axx!g+TsZPl*c_|;a@Zun5rogb z6Fg3fCX2~1GoJfp;$DRNk3DzVIaIm51DZ}7I_3=lSC`wmQDO7Z*)D&`aqwEvYue-3 zCo`{>ad=Y#T4 z=gXhBZL7H(raiMq*nAQ0Ogs5>aCO=fIL3IHc4gXD+B0l^D}Kq;OvEo!Th=R6pPm>t ze-=Gi^~b^wncbMN56ZNZX{eCiR zQtB5>4f8g-MOm**eSA*Xd{y*h)#t)xy)yM?Uf7%~da~+^0CEd9%G4J>h5AACWNK(n zzZX9Fc4&Bx>fQ;PUkOLSe-NGxrr)8?-Sg0N;u!y42UlOGiI%WgHqYfJ`ODzy{H%jt zhEMyIX@3g(`@}Dq8rrX#YJD1---({A`ZWBIsaIzB=E$&lQS@Zh$349=^>JuE5ItG- z2~V#~eGZxlpK@s@tNxBLWqXu0Zzn>p`Pt?1@nGid@!oZjItFtoOZenhz}0zM@N842 zZLwp+<`e(rY$K~}X-}_AeIA-mi=M3dIsmx^8)fPXp9z~b(UYm+xy$3HdS&V}pADN6 zL{CWiNXn{SAotopPUzB2WR&!Y|zJ^3o|26+V?!)d{$AWXl}MA-a8{F13* zTJYK&=*e5pm%0wu%TC}3-1xVj$MieYxo&`_)2cD&40wZcjd-twJL|v{_%?90{WxRE%_`B8 zsrhI2#GpA@^kmhet49z%`P-kk?{v=k0&F{r8nc*{k^m=Dp%G5_!h0PnHC#yaSAXBeQ zeW3@}THK|JObx^T4S-C&@=*D90Q_pc9R{w>w_FO(*b+YZ=iusmV|*Hy@=$S&|8zO7 zUBK0G6%qbPaG!|4$Qf{TTtzP~W#&Wv3t{uL_$AXG+M;EZ`JhaF6b~YAik__c2!Kqz zGWGF+uo<_|*+!EP;oGlOCC zvcyGxZ-}_^@T+zzTRWkj*Xq)h2Wz@i!+cPtK7D-H94&gX>NV}uD^p*B<~Y%lRiE+f zQMTcq5H=@j_+ZuNJiRjY(bXs?q9?2Vuby6csJy)del>5e1Xt&6bWPZdUF7nIybHMc zJgPlRyE1JnLZ1}BWVP*T&o6NLk z`*PSkDSEQ%W1e1_`ZzQt(UVml_4LZrr=bZiad|~neZtc#Q(uH;g6PSr&v<%e>Qg6$ z%^{*EtG?*zm970>L46|nI9T-wPp?dU4w|{5C#yc~>6NL+!bql7^yK06IcSz^_@4ei zc%qoisLOuXoUB(LDbDgry zleK8i5x-m!n|4mbFM*%htW15~*YNx=da~-%o?e;y3^d;tJz4b&N0-AV{|p+NC;ucL zegTchCq?Zeh-!`5R%*jro``=e_)cFz2-VlQ8G2TrbSIC|?%lJd>}f<^h~X zVa^ZvuCSf^@iQ(T;tyfYaAD5hxV13nW86iUb1m*C%y|@>ggHmzOkvJ{_-SFzZMamJ z^A`3Cb56pqspe74WvUwR4}>{S;B~^B1Mqfr|2^hr7mkB}C(L>Io>9${#=I!Z`Sjit z=3IH4gr4V}^WbeI%sKA16OKG(%wEEro9<9y&O6sE%sJ&gAAGwyRPA2?sr-ol)VsacrwCe0Q$yVjVv>cO8Cj(}GPN5KQaoOg(8RM>n5 zpCOz9pC_CHuM;kSbHXL?ZNi+N=YC<%z4N#*=hb;mm~-H~EzJ3CcKE!Dm-De4BFuS9 zW(afcktM>37R*7R?wB*=tLlCX>=fo)AJ+=UP|@Bm%sD##Ak6tUxJCuj%eggb+Z=P= zj0wV=6XOtJ&UZ0em~&Yit9(k0SuV^uC*7&B`~_n1#X|-`y$9vD^K^9E<%GVUDvtU6^C2 z&ll$S=qrUe_W3$tj%&VEm}8dj5$1U02ZcG-_z7W-BYswxV}xH3=J?@%FkhbDq)UEJYU_PuQ5Ls=2*g8 zggH*|K4Fdld{p_B8dFrp*u7VTIWF&gVUAO)Tk6unF;@Esb39Z`m}8DsD(?|8UsQbr zV=;s|PUIS4j{CS%HO(ROYhjMp_#a`8#rTUb$6354%rO-233I$dU5D5f!}u&=_G3R# znEle5)g67#7pOjte*VJj`@Kq-{jR?v%s$d*s0RI?&lP50-*v+5$9ugn`{@2s*q{&I zqr&X_^qesJTD&dHehz#X<2B1Z0NV)joAvI({5CyRnBSKV7v{I)V}wr7@vV`xhZC8a!rw-aU?<3wS$A2tcIZE&tI z+x?CeW}9A*a15LlW;@uogwuFW|A8>yC4VN&_r3>&`Cju|VLop^Bg|*%zmaP(7xg(< zGh&(J*muHa2jTm``v{NwZrDr_J_0;LxEmZ7J`LO^d2p<8yM>q}st?+~3XN7CC_!c018rXEXv|J4yFMJbt z58?ITLxo3Qf_Eqs~bzFv6rWnpu- z@HyZ|gdYSyqndTN_JxlCe<1u>@HWS}blnQxUAPE7M7ZGxVRM-93h<|d)8J!-F9fd; zz8-vnaP)^^bE@#s;O_`$!Rv(Y0beKlHux^#(U+qh6K)0y<7o z*MoNxZoVRH4i-*;KPvns@I2uR_-NsE;N`+MfsYriy%Oyb!p-1wgpUAUCOiPXR(Kuw zPT_mN1>yDJKML=56~2=SuLi#-{3v)_w@ZupQP}J%d;s_$;RJZP@Oj`PgdYSSC0qnA z6E1-Vh3l>ko3+C8!QU2M2fkGJCh$*%9|Y%xKlbCW`L*x>_-Ww`_+{aH!0!sb1m0?u zOUrIQK^v*?Z191?i@?poUjiR4d>(j-@Dt#q@NU(3v#|NQFxT%J-6P?HKO&sC9d&{**C5+p zm}`(t73LaAbA`D^(r1OaM$+-ZTqEfWVXl#MfiUMnStrc#)He!qjMW3e9Ai}wX21QX zg<~&<&0mDsH|%e!0dLvs(!#!B+X}O9*sjViqhFb7Ucs}0F#CPQgxQDcQ^M?HbF?t~ za&!o@FUJYO?8|YA>cQVsejoQEVYUH&U){k!A&=pAu3B@GFz2HD1$ir+>oDf}7EXX4 zQ^q{uPbp)b@aL2KdYKQV$FBuXN*}b90#99M%s%Hpq>|Z_RYIYm~&`c zE1E3w|uXbH0)F!W@V4jxgtj8r$#e=e#|;3v*tbs4(XqnWgUVyF{4%A-lK|hkPyw7s1a8KLvhW*dYH$54gAvK=={i zL%_{so@?a8r-V6P^)sTG2+b!ph+$b6O9C;Xh!^Ayu0NUlqu=76H z^N{cp;6I9f0`mN?!m(%YE;H!Dse}9WWaQ5dh<9%??BrP824RjPo};`tWLkx}e&tf( zD9UY*asqu4gxOc;Ofqb{e!p6Cq3}K69|_+IzDf8&@V#WDF^_uk_reC{|3%Rhkgk6S zKMEdqyx4pU?jyn+7k{X5aUZmY3&#>@vlr&tqiw<*OE@UZv2Ujda~#GCR3v;gNxG?8N?h?-Kjd|^a z`EBU?s`(n;cZ5rq;1yn&YdAh9%=I7N6wYVy-DHikfqfdcQ%0RLQJ8Z?Hwkn8=Xt{H z=k{6ULoq*(Fvqc;CCqg*FIN6y$lRffv9ym0b6oJN!W{Fv4f2cUh2wem66QGQ>B?yH zIZ~K?+m;G*9_-b^Ii&q$VfL^4mN4gwzEqg=ir+2F@34=Mc`X<4-XR?O4c>W0!+vq2 zzvyh^7=hh|+5f*@m}3p*2*=@XfiTxuPN?Qs%%>{Mb*oPz<9VPC&j4o%m+)+Gk#HXT zBhlx!H|AzxeiQ$NFu#*Nt{U7QUr>hoTf&7M@O|e?&VKfz-dmV!Ro9bIC#=Wy`w8I^ z_*24ffENqD1Wu57?R*mB6off9$bSoS9*^$`bB>N5laaSE)FD3;_X66d?-u5G)yGti z>wUd&9M|SM!W_dp_RB6_jtALOI0g5E$*})X)K{MrehR!uxBy-u`~>*RWZ2L4_|t^B z9`yO@J_l`s!tA4-7iQo10vU0=i+m^wzYTsxIE(P#6}|#I?j)zb8oY<_I`AYi>iG$% z=RZki*+c$(S~NLm+Jy7q9^sq7UlhI%{NH4xg?-n*Cmg%G#{57uk*T%j8e!8^Yi?Kf z`dV|J@`1JH5#>YioT+}kd9Hjj*31%4-G%Qs>V7-c-xQ9*{g=XA+wpN>uABLyuw5ThHPCOJcJ}1Jy9;w& z%X(q1Svgyn>r1u@bM4M$!t7(*C(N;XC#xRg1kV!Yn8z!GIes%Q%(04(3v=A%tE#yQ z^LGhzEa5gMJ3HCGdLkM1z#FIs>cu^eyqYbX`W(KI2`8ZM6Xsg0rz_uR%z46`&-q&6 zG{X6XaDE!@3&Obrjd@nM?jZCz7fyV_VDU3&TNIk@gi{|iW>4V+o^ztY#g7~FapCO8 zjQNys^f0WcB%DY1U8-*~=6K-(;yO*Z1UoMij@^Q9*}|Or`f=4DT_s`8KRo6XIoHta zF3kC&8-+PP^8#V6liMlG@wtP-9BX{Kuw92&nBxks7v|XKdxbfk?r~v`#al0I$72d} zyl~xGXB)>RA0o_guQP=?hW8lZIKoK@bL{G=!W@Ttk#Gi@>s62P`H(QjRu_di7Viz! z-;DWczUFM;n8)3O**`xj%>H|`h1pl|Gs5f#*sGc^pdCz@eHYIY<~qVxtNWU;xmB2b z$sQ!5Jf~5fpA@b|UGY2_^=A=v*WX3YInA~{)!E5@dbeVfKYPQkebj z+Q^72kGKZOqws!xH=cWye~IT_Ve>Bft_!EZKLXdd?jz>s9^d8hgC0NW@p_N{;qlgA zFNZn7y!C12bnWHw zG><>w@lVm7aV>t=;decLH{ka({BFYU=lI=>-!1svir;Pc-HzWK_~r4t6TiFgyBoiI z@cRXR_u}_U{O-f=SNPqJ-vjtPh~Go_;V*_?`ak7&qqFHh#vaX=&3RrTX7b|xWMBW} z{_ftvmC2sTslMLhk{tv6lUrxcZ|hpszC1ZOxq2Yk*VEoTxw~uW3CX3YL!*qz&b+mU|7iQC3W`#Sxx@(|(cx7uxdk?Z~ZdW(F%~?Ir=dOz`oTAN` zb2d6H%JW*1C*ZW=B=(Iw>o!?JSb(dG?}%%}NpdN)9iM8}%VC~Nd*_V4WV^dS=yG^+ zVBz62EB23Bykv$rv?d4U9eG4=@5+ADHoJFWa#efEv`IiBS)A%b^&mSlQmJH5XAoL< zGB|>~_ri61qQg#w2{=Kft9NsjlHN%{89|wzHP}DUyJ}wVCMYCKMcbTJT?4J{t5V&` zPMc2dyE_Fke&naxp6iWPgnnc*8t`Y@T>9dJ1By7ygE+6weNnQ#ue0|AT)gzUFxijG z-5I_~O`SA(aGR8ptd=yQ@wpbhDjPc$4Y-FWR(s!pulx*dr!xj z;4B2rfvCHE&1SvZy7;7OcNgeGxGD|62m-d9cUjI#C+Q2UvsNTKRsi+84tJvpw=_HH?!X9=4{LlT>+V8_M#e#h zdA;SQTR5Rq=-nLQxjdI}_|&ujj|ouW&=K~6akjb)u}5$t$AvSqy{8k0Rvz26{KWR< zfW|V+x%qD@_`lBTvQ^w`pd2h zlc{9;z>%o$lT}BkIkJzhW4PV2>11hgptbA7q~Xi_W~?1-bXv#TTa{LDBfb_SC9YWk zwJqP6dsiKq8on_ISnORMrw|dhui|CFTc;RMuAZqxF`kR8M4jKi!2wtMyOMx| zo8aZeUQt!&pH{dypFVR<%FEDgrh7Wb}U<9C7hRK$VS^{VA`dvOmRUO2)%- zy}G$+R(!E7A|or&h}79G4+0u$=O$>?`7jA$JWSA{zV@E}Wxai?j>OZ}zRfZegq-nM17VQq?O>q#a%`^&qnU2JGr;@aI9 zy>mFC+96PMZ6JY*Q_t`1O-(@%-X4q%e8Tv0sDUed2hLz|Zw_2R>QWm;*KE*wVb(Xf-Qb*7 z9Br;RD0}6yS8=qysjJej>`KVZvRhUDoR_MK%Xh4ftxD=b4IaTq+E(ykZcIUBJY%d) zx;h4W`=TR1TS35RNDjh9r4ukJo`9!%jCw9`Z}b?|W8gl`W7Hvm`*e@%QQrjz>iwAO z{iy2^H!i>Vt%FPLd*0z_HtXTD?#%ANH;etr;($ z^LjdytLO3cxjz}yy)M9wAGfazPBe3{r?We0r3?6pf|khZxU~U~o6d2AI7a;N5S$=+ z)0^AgKQO;{`IOdf`EWL$F0Ey!S-q>4q7kOEbwztmPj3&ttM%bSrP_?lXhm~LbuQo~ zp{sMSz1zOu;dP0@X-lOITX%v})o%t<{ru|C)w6uFR9aqiya*P%*pmyFFP)F%#@o9_ z+Nh1|(2HXeT-DOFqL$8F-WOQvo8P{nE2KlX&gk>fS`h+2ylfZ>vZk@AvFz?X68Ra{ z=A0@l3sjy3foub}N}I}lD=iA#E9^OD@Oa1;^}-_4raQ2uyn`cXM)3}LdyKh!j7r8? z;eyyq8@?HKud&zig2C>AF6<2D=KS*glTUOg<*Nd*I_i1sL#-mO%bK@R7qF#)M_h7M zhxb#29!SLZP-fBZhVEt4JPXPtRi7Y6T+p@1FT)KpXVW|yRmX+flSbv892=J> z-E2=#)o~7;75158#OI|tE@Z{x4J$wQ{Nf!5F4f8--nG8LfhsRUWVrRhdTkR_kHeNX z#>0%o-PX48jQFDxYItXRTW4=iauTW!1if+zY9L387xf+8f-&k zvS;MoO+L)?ALC(G;1Q%7o!5@&LKgzuBSzYwjHq1-+U5n1MQrl$cJX>19P-`mn``-y z-9_oBZ(7ZFUPpN512nI8|2C{f?YzhfY&KJ2T`h@M`#Be_w62%Xh_4=eD?kz_<0A_G z>5}&HIXxZ0yE_^H``R1$T!Wg~?$kH=d+xnmT-fK!T8s~Lwx<%^(YDar*L7lV&p>;( z+edLh_|iv7KU8_I`Q=ynat_*}wZZvi$t#~5t10i=OoyNxh`Jzww4~f1;W1%ut zeup7$wwq88*#_ytN!kQ&@EOesd+!{v1?|#j znU@_xcHipD@3e4o9WccSuZ<~u_;G!VKh?W*6J$Zq@zAArq~CrKN_Eeg6VPAO^{jD; zL>~v~%4OQopLDj-<1RXBLZyN3YIEkIH(_~qE}ENB6EO+AAj`Y+@X}M^Am89T1s=$k z+0U(;vDit3JQG!4N4iFSfd;9m{yN;X(T}}25_}Ed!^ZF* zl1E&ve8?-lJi3TOfckKeuy5`rC}c89s;!mz---bxYx4Gk$Qrt$WE7=Ymr zUWZqlIHy50=(6gn2smor)*1Lxg`Su**9@S?a`d#$~$|w+Q8m@54~<8ncbYzf2C>aThffYqVn8~|F*u0Q=8m9P zSx48ga?Prxz4&O!mzs8z>dkmR2%?lzIZsT$RRdE;Tvr6a;~XMGH1w7e@%YI?Ug2t8 z7WKBAXkC$2wpDKN64$pM-r>Ygy?VGcxqMX;LqPnH?VF(7do{L&y|^5c;;6wk1fiK@v+3C0Go{?M^OJRu0#_SNO6qjEmM)ip@C7)9tBB%D(UJsi*zbu(T98Y8a&K8nYk z1@1+1#AiiA#|7X8KCgdC7e_VFX+d&TZ{M1uY?Fp7ES?Z=t+wSng~u2SF~cX!;F)K> zePHpl9CExtkj?@5jyIk8(tDiUWGl^a#W`@Ul$U#}O4hhiUUsgOBlMvIAIg-VV{CQM zzPN0!i>W&1AjaTug#otF5Y6@&S7S4LW;X_tZlcyUdF|!rB|H`KWN<7%&tR&2)&|NW zV@zH5KKznH{i0sip;&7huM9XRWXRDKSrDADO6OVVB2uAq z_cK)f96Tvc$6n}iV6)X#czVYmL%B7v_IEYDJgklQ+H}FYThoH}l}SDl1|NY?htW;G zlklsGtFh^5Zw~tH$Q$9#XU0W+$?op1{)#5@k!P6q9m|VPZc^w6j7Mx4W$$d$*E==C z-fU(kJ8UBnI{N6xsg*Ok+WQx@5A=1RIT7xtL%x6>M12@a}FCH7dv7LKV%NsA&pW%=DVBqrWjO~#It94 zwB#y2E8)9kFFRuKJqv>caUr|0Wc}zf$~@cz7xbjbEBpp&`|8WMFffrZpay0Gg?+)Z zjqMBC`|*D1Qf*yZdPQ!_t>lM2!i%`MVN&C?W^{~Q$#BprV289#YMjcRvnb*C{?*tR zZM1{hkO7I9fWJfPW9vkF~YBNZY1htv$Qqn`UE3@I=Ro#kr;7rk$GZmH^|z7+qL=f+_8yLb=PoCT zv3vgKyno-h^kdPw&{kLW!`;YlnC^7?vB>!>N8;|5%k0O85r0JfC&gA{U^0VNxTLnG zZ;Dc@F(8Svdoc}HXBS$8P;hazqw<&i#rU>X>7t6+z1pEmU39@)_R3%T#$**v)rb2+s4Z<4D}W5Bs!$ZRRK4V#Cs_IkAYJ2Ax-M<=pPUeixC;%f&rioCZL1SDqq$ukM?L3MwBqg9pmC zl`RZKZeDG8qrpw<-&p3WB9h`U-+hwQo}S50?`F6u3Qbk4r~&vsz!^MJ11oU87%^VS zy;$WWI=eh~JdZELofxAv-CKr#Bl|aITSYX?v`@3$`QLU+MoRoiP&b?alM@!Yv1CKc z>}aPmv|lgy$-oT~`#+s}@jqc|L|%}1T|;@%YjcRn!q90A#X{%6@+VlbvsPg;M-1lJ z=qyle!_Lp70SqxE5el<(s3!HRRL3aIIfrur91-O4y&;rgIJ;bzbQc6`wt%p z{_mXvBsiUJ7(&p2%k2iewR;_gizj^E z!=)$25Zz)o)(e)eaQ{kAPU+C%mJX=y{NxT+cA?Ss9lVTsomjjM5*zKLu|Y2icKG!? z+A9ZlId}53;0NzFws{@-iHBLf(jcMLpB!CQ%li(SEdQl%gcTpc{_`8VE1Q75RwTbs z2${4&3j;qZRXXbH`GAr%l6bNafw;h6=yaIoVP9==7--;)Z75jE2UF zBs5NK_Wd^2H{hWw2&%EZB7yi&>?gl5T5+^t%5*=XDGgKn6iu00kvUVRRQjDd9al*Z z@6;)b$j-;?{y}DN54Q0iU)sW$e_3 zip!>qziXhVhHX7DUE(m zQyVH%)ExDb-xRILx~3_Wr9E0v#nd-d>^9U_l*xu@qo2UW`lz3TDbx9m9;9f>^a?Xj z_AC5Oo9-t86_9W9l;(QBFf<}!FJxRAe!PvlqvO7 z{K7va+FX&qXhq2N(<`o&DbWg>>zgY|d;Rpv^fp%RHdkEx$PM4fDbp%$FjJZu{mhv% zt;xU2rcA52V5d}`{V7wXRwQsrL&a`oO*o~o;+`>OdSivSx#B)IrSe`iwSKB^)zoN% ze>qQ$Hv2~ra>cH_G=g=n(8FoyRh@?HeL7rUwzif3WQ~V^zKj5y^ftpZsmW5CLTMan^pumi7j!NtQGJ1yfT9dyYJx{)H!Y-dB;!SG+{ndbMpss1EV z)zI&r7`TE%+sdGE3FZW28$Zm*#$a|Q&zH=&6S#c1F_Ig8l^?46igqgCll&&=iJ-yp z!C8A{RDX$JWBEo0qz2E;`dMou->U-MKmSUGZ<=my0dJT#H@}MJkNLC)%NT6j5=2cePUO}g1Q}Bv^Fw? zs$x!;Ax2gC79!kgBg;;Kop5rWH7kPlM`wwRRej^dwcL7bvk#$ZYj>AAu*6jaPKWYo zftO%>ESNQcKTnl7xnUX_Bt;eTUFnN?#i+A?bqKZ{M_6I0J!!smL9>65I&qQNuVJly zjTJ-DBdxrSp*_2Hg4SSI@|=o=4k0MdpkzZR@9Jbh+eoF03qmAi|GJ2UsDt%^AguTd?gA@+IuDA6jVIW1xu+$?KPLG&uWHl?!kt$! zR)mI>+Z=5O!TXTh(En z-f&WN(xxfKCVm;HvsfJ5_)_K8^(SMR^qd zzci*k7)!531qILDugd}Yhd$h}e%lCcCoZsd^0M?&C*fPyiaG>c-EDW3;ES+3gTWF? zmHp+}KgyeJn_2Zw=QXFm-a^Vr9DWL#`5Sh%|8V0N5!+CMAT=$vA4KrjX47e%@m?X}ll zd+oi~UVEP;m3`M5AnD8_Y5Bz^W>*Wa66$)$QUsuC06y@?U%!Nxzii55@hDB=h{d`t z8;^(ebGOH8!1@*_{z}dHFVpZnFqKZ+YY_oXb1?@B0M^3@T`w4*1kcptsf48G5s;(% z-C5o!L?)h7sG;w>Bqn81QTI48QTI5xO3K({Jw&bl;qMO8)hIFfc2UW?GT0@klkX4` z!abiF?eP$4{Np_wr^JZ-!LOkta#%~7L^!@=IR9pAqKUkUL`YC3zWPf}vz9P?5OX#Y zk|h4DF*WLf?+f#Ut|y2u^gywAzL>0P`Q(g=1am|D77mZTzys(Pj_-PDJn3pYKe3^{ z_@T?};vq4TiD15@%T;uTyay^`))H3R!r$|YSQG{rSW^*-B2VI4e@=R~xq?!4&#&lIKR+$-4oqz1+0E?k;ILEz?`EM zw^`%?42i_YzB#dIkR)0K)=C;JRuUFv7yQ&6C1a*M|EmN^kwWhfuQ@3JQx$aZ@r1Z7 zO#J%<1iCA(JCLsUBp4U|&S28>C8DmR2yq*MW55>&iLE2y^snE!uy!0t8O7Ta$q_wY zuju*EhgAbHwLr~^IPX!FB%orCmKeZRiA1c$06n88bb~K)Cm5+)=C0w`Gr9*1^iFq9 ziRVvxI>w5!OdY!6(DlBIl?kkzcsPXGd!Y-n7NGcj7~XN+-l`;Y&mTRb=V9P$#5$j~4DfDUH*AG&sm6E?gR2lM9Y89qEwQ(gV=Qakq`XP(dA=Sihz#rVLQz-&CS6$zJ@s zNP&wKxJZGE6u3x%ixjv>fr}KlNP+)PD6sR)m*>)LHYpXg^}_#5{9gi3z?Q}9zY4#z zQ*2n`k9AHM%cHvgjJ97e44Aew{3n!rdU-ZFM}s z`k`%!|KXX5sGj&e^ppk1%0Xc%k=tg=u;5Xf=}*9`o;rEjbiN$#39rL~7Y9ONkfrPI zJp8=ay3iYk;_p0oa|M2$AB*%3ghh-9cY}?nYT6LtHR||ZPk813Axh_u5;-VL^#7qh z?ARWkg}q00&Er#^K&GDXrkVoYSqrIn_=n+5o?6Y{WEVNkgLg~-TH+PyQxUd6Ul3#$ z-#L`AN>Y|Mzm;2Y@vvZ5&Tj;_i|-zJqKj(O&I`lKwZPc`FBvc5kDPcK-0JGbr&Z77 z@6KS4IpaKdxfVVaIyMUTgg2lYylKDqSMUlgcp<9{g_Ge?JFn>muP2}MXzzVuRE6RU zhVZ}U6MWR;7hM(fq+e)^fH&I8Lg8fmx=IQkv=4Ziy6dkeyxg$@-h)5s%9D&=@))KZ zG%lbfr}KlNP&wKxJZHj|4^VxW&cpdE8~=RH#s7w1SH4yV(hsx!Zn^kX{TDnVqj*`q7xo&pK&00(e3ef0f>{H$Up_^^;unzNQ z|BkxZR%hT#-|ecA_QhbkZMbefqy|F1OrDQ@>}DroZB(;A3t-qmz3M~r{-LSyV%Mqq z{MJY#Q3Wls$tx#rQN5cfQcZ27)<#o`LaMeU=jX};%0%TsrF!CK)fk*RCDo=Hcm53+ zt@TnvjDC5DGV>=<{NO($9?5Gc`6iM47x>NIBKg-M`9(^;StPHdhNeDuX~we)fOJJt;r?H@GT$Uk&W`P1l~vu=z&nLo@Z^Sqf`adWYoT+emllL$jUe z$!Aya!0;R=AU*pM0@|T-4k=XHDK9oCbQqy+r6=UY3n(Mo;Xp?|HNfV(LVqfkDxHdG zeMTPDI}u(s*Un~U1Wwk-Gu+U-5B zm5s=8FmJJ&%~d_pIhWLelw8D=AZD~%_oMQ2nf?ql)fobqd^dY^0{Do{9Te@OJ3n9* zIg}q%A`+z+ZEKgPPVblueWqRO>?=RL8HgCeMYH;#S*mxN>YZESVx4G3*zFxr=waL8 z-R&+NQ?AI*ZE|~mUhI-rzOR;!Q03>sj@(`D(u&bY2`Ra)3i|OC#DyKkFc8lK@f^KC zyiRB7W(6rq?lwnhglE~NYICz}=gXoRa>MeP zZQ#V`L-LxC)N_<^9*TZ3!1;Sqsq>_DQgmRKAp-<+&o1d=;$hcvl=)_g*&anr&QL$3(x+c!d>-~+|3{)u2$K1 z#M}Pfsy=tRIr1TJQ>22|2WgS<^NE|65We+CZLwIa{v0X#VAlsT5fwl~V~t zgdeip36?wBa#hPMw_MU3QvO2A&9~fK%O$NMrDs_#L>Ps+(x0>X#LYz^V7G+h$LEu= zW3-KhoMP-77dt065F>hw4NKs-SLEJdDaAv<{J^=5qR9)rq+Ph{m(FcR&RVx&5&+Z&+4%3~2_-uEB`b5D6(qUw#gK#!!JY6K^si&f@ng;y2ckZP3YBehxE_z?0T z^}E`6m`IUZwIeONXt&@@@v9eSvEoZqZBwpVeoW^`qjL-@ZDnTf!V15{^ zHZQRLRET($4U_Rdy=B;s7DR?!NhvB@NJzIVybZq;qL#EQ973VGbyIWqa-#99_ zif%2>(N}e%b7DJ6S5Z^vWvSYBSzeQQNzFD1e^I;c?vup`#Wr2dVZmj{%z`=mcNySe zj&vK>{|(2j(c9#KwtzMdP<%39Eq#UM(EAhYwpf-++hTWVExE2(#HGcuDcU;1 z-sYPoS{0jRUydEeDchn(CJl5WEd)5{k;4B+AU@~+ z3F5C6*}-qcVIUt;VtZ-12(qNaCtYW zQkz?^YWCKFpNm8>-|8CSBCp(}dPAzz>DHYgkDlRXnZ3?S z@w9sMOWZ75azUKAvCea8VYm>+u}!LWCd0o9lX6MY5}xquF3;_@uRlSW3)LbL&KWC-VNU|fd51Bz1_O=@yRey&lp|ZE95{!4K z9qjGV@XITAfVj+Xz`x660hQ-&oWI!=kz6<26db&PVmSkDy{p2YWQ3(ZAk{8F6tc`${@!Bl`&(` z2sWRV^e*Wnfpw=g5ka(OBAn!3pv`~TR-4UE8~52UK1r+^X?`4U$FeX%0gkh|Zjfs8 zT`Cgwst=GpnWt;>m)UAB$HF|h=5bef|@KEg1fE^$j|Xs&UmHdB|>%`UO|`qiDzpK-Oa9!<7I2T&kG zS&tEAi^_GUFPn9=?sR|oMcTF=;%&SK3x9_()oP`KeZlrS*&(#162<^A>`1{Y{uO%F zY6ojq*ghvajI=VI){PQ(i>5gA$392`a^1fGas^N0JkoY>@ zlBMSXIgw}y6F{0l9~&r$$=kU^P;}h% z295XV9RR*uO?{dV_IOtPX+D0XRus%tQx}P`ohS?5tJ8xt;?zhTi5&XVc?(bN)2o)1 zEhVhiQmpK5)A`VM7}K({9Hs3J+1*YwQniguL{49tv-H?Jdr>HQ9k{|#aKyomnt%I} z8cldFB=DG&<%Z`u(?hg9TZbq|>EYU6LL3(yIk^c7`d4`3{N)b)4>ZIfrH{D0-(o=5 zxuoei3i}WnZXv@IdF8jN_avfok?RjMfRGcxeA8>|?p#*Jg`{i*5p=QdUHW^Xhrm4rA1Qi(nn^N@=9PV_ z&ZV>}wV2EAPsI-8JwBNgoI*xwVfYY)L&z<4A|vqyGP>E6|&=KHYGPTC(U zDiS!pZIs5wPtuF7g1O#Gi z-gMx$#x9YX(EpdDjPO!%`qM(P{u~Vk$*PIwxYUYy;Z9Vtkft(4U(*Q;OFL@QQLTts zNb8@{O%$_`3XnFdAEJsvYli@qJg^SG*s|8nw)w77fs=D?DLNUwEpSp~ zJV6=%-OBiD%BaSm2I;iRfgvPc25IMj#n(!3b;}aUC9nu@BqR!UCgX6f^wj+SV&|f7 zplK8Ee`@r(qR`Kk2ci4urawv6AD2WLY2inIiT%GHi^T7IBUNJ^ZT`)7??|QH`Dm5B zMB5J4&?b<>G}=_6i{Cwo@xZh!gtT>>cjQ-T^6OBvmJ|nDMWZr$XG9|x|7;4^y+wb* z9q?jrurC;fE68zAo2sqj64##wtz@*H{LYAShy0FrD70~hxxO#e z*$fv-V`rPkc*|am!KUi#Mx)nMU7G;MU24v}$Gl-A8XVyfgd?W|c3oyJ2n|B={6vWV zA_}lKsUWmlZf2@%orz5@WMW7)GVfLy-}5@y>F{C5v0bY4H8#9gs%#a_vqO#I?+Lsc z3RP*7+sM4q&GZaHLfYhFZ7!`f#jSgqF~jv4X=J7&F^ekF=C|6Yf!m^Xt4t1}BO1wA z4vy)xIJC&>>pRNGd>3W;f-$uU1RZmD+R#)qtZB)(^_{?udQ?b29 z_ZpdfK+;y^q@70UX%~5W2lb+}aa|puGoH#eHqRs_3 z|NTzlW?vPGG)0C1CiNTN8}YS-t`V|)b)aj69K88rlf;Gs@S;mm&&k?D%9^-#plCIC6E?{P=^$|YYpSqRK zMOsw7Vl-wDUmBk~9IS&2lJoRm84wj438@X#&88ETp_JV45~5tJMTyXaV{=6o(vFk< zAoqio+(+z+F7NU#FW34aFETV)vCu?@;Kf>bg9O)n{fk)4WBlGk)o%8=h&u#>Opoz6 zc8AB!EtpT#zyX)+_|(N7q$oF*MYmo-**h!(W+Y9*$@3?)v*3zQ^fD~54pG~DUu#2B zXFw5G3AOJ@UoX)pI&JAi8ZW9TC^4(cB{G!QC%-6hfp0f zTUkQ4Yt4U_zFcm28Fj|%kQ<&w2=&NM2Pm4iE99G}mGqr4t9xDPsy-bnUtSyhqjObJ zAN*>*i)DDIb-Id)8ai-KRu@tTFUb;cOdks{==uUG&r&mr!>?3894=;08r%- zjnu!KVfPY6HtwT-k^}GJR}W?(OKcm_qbjg%b}^K%RIjrrl%#KU>%%*V27O%82{#+w zsYzadKE*=HUxM}sY`6J5s`hRZ$rRsp+Pfk0_^(o>CW->X;Uq+h6sl~;#P&bJMwp*f zX4Akl?tFVVqyu$6q(g5+ne*rb%ozMf#3T6yN~YV^Nd6Q2=0qe5!Y1)k*ZQIU7_CEr zrpn$c#9~Db>?e9A=+DV*wNL`pmzL1lxd0tvl#|bRk0Q*w7jRiQpKaE@OZO}5poa$# z4pC3nIwgOus=rEI>ek;OkgkG*F6~@zx$zm)#&c_(DRRRNNNOL4AFC`F+ID?=omPDI$g_Gws5VIL?|FT7spf=OcOuS^Gm>{a3m9E}H>kl)O3b9nwf z>kw;ezn@wnuth1}Mf#{h;_rUioP1ktI?o1~bAT4sVyuL`f9Ti2Ff)h5YoD-gbvvvSsYxG+Wzd6Q z55$jqpcFowA%)>}3`_|h%92{cW||g)ely<0CSc)ae;}H;**ip&NIHJvc!D=LEpM_Y zTMhXs#uzhlsf)@Q3Bt@tJvlN}4um+ESBZ$)TW>6DN|UfvpUt)4+f5+Fl`~^dD*8rO6F7@M5&c z4M|LUKEvzp5wIQ%Z(&J83!4l#)ooEsug<^_<86wI!c>mh;ODuVxYIujY!MY~@oPkx zgDQwE0yOybW@@zFbc~Yq(GWoU&B32y^uUrLK$x=}8bX}+)KzkT?%jDxPst5ekf-33g{-@DBXy4a^fidK;)J-B{Lqxe%w0IKq+$Pdf>J6dEFYksgP{U+D6AqEYB^Sc(;??_GH1}8D_8~2&zwyzmJVHM zvxnUarLV%AP`PYTm^}|B5U>&Ag!8bwacbojaqmj(JszCL^awpUQw6Rfk0y67f8FR1n3Nl+%v*hg!cz?SbQ zTU?;X4Xb(hy$rx?|Gn@Nzn(96be<>HL-5cFwjGlpR0`$j7(rCfanY}0K|$Lfr!DrM zi^eL_BD)d{5P5@3iMm)vXOV^-F4j@bC3;0Jb1u^>^0=zAA|G+f^@>8~T;bBw5omJh zz2Gz}y3@u$S>2AD&~xz-#E&Jh!PEo9OFA-OD$_Vo^@q^cw5!FLjXgs(45BVWrv`|Y zINUTmbqKOg-RzwC`#ZQ;Y1mB!#b)J(!yt#Cwf}m;!y@uc@mYlrhcYfL<;D*{c+rVa z*m71Y!z2y*Jadrvn0*Q*84=rj^;2S7xj{#C^bt@F1!LQ;4XfU;+bFIBZdu4S(iqes zz+qPCPv}H`8m|DeBV`$Gj6IQyjWm2GGTKQY8{rtC z&#dD|!f_I4Q^pU>BlNNu?|WD zs8}1@muM#jr7iksA_(alr$JmKH=OE<>oIGV@`ci@8&#bPbLzj(Cy7~W75be|SH9jf zRRtzNQ`F3%*KeVPW77T$B8_1O36XXwoVC9cA}s*FxqlGF5B{Y{{$>c09~H?@QSw@m zJVGRYNXgSg@=Qv8NhIGalHaD}$3*gjlsr!)KPHl2pyUsdfKL?3w7CUpvnV-*#E#ML zc`AJ`lC6bt()u`IAC!i@gFlnz7))o}9tgW->`LW^0HX9%tur0lZ<6=XPqofo^3sq$ z16ELmy)L>_*McaAb*-;IhQ+!F4{}JlCMGAH)>yQ=G1hTk>2u2wF$=OAnj!9o!-b^O zq899+jyVWsC*J4Cv=@GhkTLk*@8ymAPdIBg5J;onQuxhZlwH8y1^c!bmT1i1Ol`}K zw=F-pE3G#E1$6Az#*cU#!_>wwwGjqeRjs;C?Zjd^T{|uLS4L&gQk1p5OFx)#VNSsJ zWwZ^@_^OqJ$_(lzeF?%itEiydXrNx4%X98XUB$WP zCLFVZ5&j0W1S2H%T>C&`4`Xm0XZkxCoH#=?z;BL5O-Qa6$-kszYp?h;B^Qb0-wx*N zG=h?UO9&YKUPF|5sYupD^39aIP9!g<E`8m z7&B?+y%02*`)5OT`-W=kh?6AZ0zu0S00}?wsQDN28|y;kFWDDwJWTZ3mr;r}I*q}_ z0zCt~zxHE+ULm13mZR6xUO+phI!G}Lv)H9%zsQ_#(Q&-LDB}E(UWzC>;4C_+vWZO& z=3fuD75_u;VSm>C0@Xuj=(lo~o{06rMDR1j#E&V0EUmNQf%Zsl=qs{d z0t7J1at4J1yXA(j;gUsfLpwYU-JeTUI;kv4T11qn`b1i}(Tbx9Trt{3Uc`c0LAv7%Zxg&G zWnfKbDUmJ9L4u{nQGcY6-)SU&pa!=(N}P4k=m*F~ILlKZC>#6lCh`Xu@w?+~(j z0okZS1hqe-2qNkMczB2G7FnR{LT7A6fI5RtCU|G8hKD+X6ZQ`Xpkksq2#XbT7h&Ik zI+GJtL!$245+`gZLD**XUlaDjF2Xi-5tc~E3Co%|QQ0z1&`2E-ll~%gL{IutBXvYm z`m^YoBpRTsq%ODhu$SR>uqVO$TCC5kG4h&yE_PC3F}v^&}xg1wCNUU#{0 zgv|a59$MSZo9fGRux8>Owv1TE&6)(;tRO~lv*m>K1@yE@@&N;DkMBB~kA4i|`*PkT z#jwggHuvE{3rJa5SHqYw3Qf!bsB>dcSX<7`H_Jrzq~Wuvva{89fC}$b>o+f_7&f8M z5(dHqpX*PJw7(G>vSH;o?)o=7_p0!|io5)X9j&t3k|cd@mwpWVr;6pgjwSi!w`G#W zS0-#1Ve_u$=;JfwmAh2$$7u5i>H{D$jav0+fY<1|b)&Z{mD)FU5Iw|p|r9MW0eb?ZMixxVqb*9d`%)z#Um%M$s8DuN$pki6)-8M(Jm$b`Ky5DC9(R(|k?aqQd4)(EwZG&igmZk|TKVShi5|o8O?vq(=BfGyF zOF7tI7D>tmEPQM(Zo7imTRbuekb5JzrXE&(XR(NxvMdG z!`2zMyRgxQb-phRoCEePj75KBl%K^eVa7M$=uF?2;47n?_)3vqjNp*D2}sf(yc{** zCDiE;v8{2hJ~tnl)Q_|ylD4TY+G<`RcB$#u0WZa-4aWb3j1A|~7!jxqDlNL~)2d^o z`2e~as0qA!wK%ufqE{N~Sr~oH_!<{Rd|!&5kza(8NFSC7BZjP4c-Lv>fz8*hPN+aU z-VM(Hc!gnKP+?>aIqBRYDf$a^AW4h`Sp}7d+j|&ScqYNS#Mj%!wvsT5Vq@#XA-25) z7k`$FGNxT`8*UV@;75|?J2=Y3fjZHE%b(k6Rgak$Mjt?79HwaWLnL_On}GQ1V`wv5lE*#3?RpH zkPhSKAr3Yz59<#H0iJY0z`%V4tj$U+Qw!a{T(5dL4t`hPIC%SE5UdMh4p-nyVBP28 z>xKnkDvW!LbsfOIJJh)Z)kw=mAA&T*6GUq{@LQVUXrZM;`)AneyVJA%l=6E{#;#0TYSsM!5uq8t%Lau0msr zhpOSDDT@9qXE)CZr(TP`oRTG&XvWP6CQ@QsU`DS<&$h^eJaQHYhL7fy8o7)@E+$ zP0Zi~Kv?G(#poss3w?Nw{uJ&s`0@%ZUYnGctNXVg0+-b0-}IM+c9O(W@i@^Ee=R{JgZ1e_BUoI|YEz5~2Kf@;AhDX+|u|`qz`V8 z8ELuD7Dlf?WM8ZmR}s2K+F4p+%0qE>s!@|Dab}viX1XNKzhNs#LOE#zlu$>}R4&%* zVn40ZB(jcVq4`Du8ksaVh~01E{5*O6T7qRBcC{EZB&J`7Ng%`^`$jdMCDFpIq6|K6 z;Kc%9B;+IQ=H@ps=XzL?wBLgIlIMTj|5gEPOXfG>h?L(pP;nPPACIXV&is)13HS!n zt3#jsy5pwF>qX9D)+(=buBQR3kIxlZv1L1I{)y+tL_qMm<;oYiu-!ar1}RtRRynW% zC_ALb);py6E8KdS0!26OpGb6#BQFfayhG}MeOP6V+iQAKpU8@Orz}xoE&2!~oPZ&K zep%V@4A~(2(lU+a2RZQHLquSD_+_|4};@-g^P`Uy(r8Z@I{J0<&&eExk1+TU>%j99|Q zd=H8x(Rl3hV3ETGebHyE#mW9b*F79W-b3Ir$`0#XN5NNmUtB?!S8gT4Z3%mbn0W>V zT#B?6iY)XE7E~nmaRBHj{c6D`zV6LP;^y=0jq>%%T&Y9VasSGLJ%Ew};Mm`QG49J! zjR#UB>UUPvj_pX;liX27YZ^|8f@Rt%N`3^^l8O64Gk59hL~)`PKO$ z7Q2SMmy(Kk+@ss`l(KR#0XL_ij-T5rmDDD+W!Ou&S;(b7leYw57iCJJc3AvxQp0C* z%NG@2R$h0sqda3rd9e60k7Q!Eqg=ZahMum{7XSNDhO~OTjdZ%W24?xQ{2Tb#V- zNUp8#&8_Rw-lYu|X{x37o%#mq7ni|rdJ^$9=lavidfF9P-6MJf>l0hly96zZ(|;Jq z-%C(`F~KA1e{U!1$7*jD)St2hcSni*uqKo&;*T=y`N7P~lxsiW zYG1F^pXFOL5c~`X{{HtC!ToO$&G#o0yvN8aB(ZATc^RCwuM2|T0>7D)M`P>4^v>6- zvGvFCUz@|2iPglpzyWO7NP;%gjz1P1;ld76+XA_Y%TH5t5GBN^CFij{X9wNv3+#x@ zTO@E`!5-2=J^Lo79a)err1cKEpbZl;v;xJ<^MR^Q z$aS)ByYvg7GRaV=RiF+q??nxGYJnonP4GLI3BmjUjX!C#v)~x+0x$S0Qn84r#z-v| zutRQRIn5R%Uw{!YGJ$I|kEe2QgrzS54af^u; ztV6%sp)bfH22qKO^;>AfcPr2FIR|_k?1Wj}h0ka3qIHliEpdE~1I~h-=ZUDqgjX^NZVY?}+a#~t< zhZlMVZFH9-50{F3c^Rs;f58<| z_LZ9*akJCy&jCp+BA2UrEog;3kUla8H}OzvtX0ZW5O&kW6`bX>uRQFKhnIntuz*Ie2Mi^28Og78W-$uvB@lfiVxSvz(^x8z?K^$ zB=k9dw4yIwcR*LF-cjgkPm^(mu&)q1cY zEadM&9E!b9ioyOC8!EA_l!WU3sz9#5#ng*gX%<#k;N;V8>2oahF+QuB%r!WUa+F5> z?`!klN|`rH_0rOgx^v=kw|DaEq-R_LAjMrku=Z-fs@aNxvE!!z)(S$IzXYuAd9ebc zyd|P^C$BYiej8;TOqpX_p=R7N?>8t#io|4Dnq*&jf$@EfUNH!(v<%!Vgi%F4^_{+v z#ysq79Qq?!ZtoMBzQGVhwGU!Y;HG;Wb!kFg(g{2SrrCTA7wix>>7*FNgBF0K#6IwU zg4Zjc*147-48SsF15F21;@4E7E8l15i300A1yV`l3jfAK#7n*#xZZ^uVSf4(K0$mA zXKfDBFeCpRe)H6iDSmKBB)3xXRU(=E<~}6HAA~ud9_%}}F*9oewmm@dl=&t!`&d9* zXO5@Lmk_oNdyvBx&DuaSE9JcQixko*C35~Mk(1V|$vIE8Q_i+T&PtIJ^V4TZ@OB{= z7JZ3a*Cuj(nUw2Io@;9&*LRpoXHu{OvV)FP|A%wX zhLh3$O8q&?=YghJ_MC*yvG`sG`xU0M1BndZi45ORhD!OJ;_1lHA)vG+GMxv-DV;>V zZ;{U_9lc;S4$E0{@~^OERl?`8pv%l~%I*^=*2#-~C5rV$!jnMIBYVD%BY0MkHdE>W zYJr8|0U&q~KnF~4u&Y!poFi^O+vUJvvcf5M=r270vO3t$j=}qo@OHpENqE17cdGD0 z%k|PU;XMm4^+xo+F;tTm=){jLl_{|)k#y`=wMZ%!Kp74&a4y))91C?${N)uf?Q;Gd zH%4ALE1P`-UA;akH?R#F%{i6)MJd`(kpUE)7SOE=)fk=ODjSzEYk;alN`%r~td}Zp zcge4h%PG;qB?=pv8>Q?0W(D3vg5=9}>2yZ0T`^OM>CL>g}E^^YvqQ_ zq&H*|OKs=J%Q%=e>V)+$sAl|lR(UGy(y05FAY&8J5;oBpMHoo&bE^1$g8&Va*9Q^V9l&9L15ARBMRQ!S78vK-{Q(u{TBtN=zl1~(_KkRi z0b*!4^)bJKK){c|9uw1(y)YELc>}j5q1e4vY*R|~iVg3?sTbn0O{u<=CfGGjToDxS zc69Ik_(W;B)c?&k45p;>S(=~idiuo8&9vn|Up`SfE^Lg-fDHh4fbR|fZDePdrtq|t z2=u&9Nmo_+kbCvF%`5cP% z!edoKU`4YRw_Y@aGp^^sHgIjjbQ-rf&`)7S9t_7+g$X4j-njxZ33)>8P1x_$KzhY5 z3PO7-u9KcQNyD1oiZlmY4$?;WjYlFIyc0;GaBoGS<>p&%uI19o30W($$c>w93KixQ zt}jZ|Km9`WKb2Jf%h~^L>xVSrGvdVd(F7|=lPbm+?|;3K46$3v&*6W}7HOoROn=%& zx&djc{juK2EmRxnM)W+nj6d?Rz`B@+rw3VM5c!CM`TjEbJux2^PGC$hOrH(Q0n7aJ zWvTJ2QHlM@xG{X1<(I+d48cU}n=U3<-_-y63HAsc8|*p3KKWy|jeUG-w<3+pK7VTM zC8pN+RJrRa5XiVwgA<=B?}gtyed)i_N8te%OoE=}LM!r}i#CujDu1-&T6$K*yUG1% zXWt4;O?S&HXJ&`L!ld}AiKR$PACZka=e4tLtUp}`y2x4$PMIL-9-WU#J$n%wgE{^3 zgY#%w%j{DyA{Ro423s+5;axw7RIZ0G`n@>>Sko0UPZO?Xqjsa8N>Ml>qnRuE)5L^I z)!5vR`dhDcr$W5~2q-`r5Y5?aS7UVEK`$d_$;Ng%PLWpvW=vmahH>k$~kX0;Jo2 z&nk$XHA!IU4Z)gkY4v3x=mspO)P-Xgtp5_Q-sG?{f6qn`tRD+l**6r7$)#6DjCtwl z?bldj%t#{Rw>Za(H@rKJ_W>>@_A!7oRJSh&j_9kcv%5Nna5O5(Un$@GXW7?6vuR!F=)2OORtjs=Vz(5k$Q0lX>mp_NkUn*=(HUyln2cFJvi4#sOT}JHm0usj_hM{BZnQ7S zuV%de2Y}+n3+==lrAKHh20ikry{R*^A-ICOaF*`c^O?Kg5KdREtyph7ql&EVr)z?HXLWMADRuh~r-2YF@Y3wYvS z#T48vs?j=S*?0sbC8EUTE|5KdL)Z9R@e?su%v3)rk39%>hQG$NhUxBkIPtCD=Qw#W`(#r5;LRf0Ps!HCu@HVU3X6#!)PL0< zTS0X(Ji8^<6ekc5F%zg?rTvRz%P6c z;Jap@1zo^vXC(mZ0`L(40fBK>hyxx6z?Y8{fcq4TEQ}_D-Ovqe{sqC(%ncCw1;C#2 zS=~3X(4JylzYW&oon-JgzmKRj(-xDzdvP-QU{`zA(Do8TGC{6C;#59Pu9>&TN%gLn zOtVn6ql;D!POLkhLgg4$#r+)xGYaWp1*{nLS9s^(k<_qcs`1R`NmNE(%2`L;I0lBkq1aWuO*P1C#>E`;n8>OKaG|3$!w(SigB~1` z{2NFR2*q>0It=(E1Cn2L0FIHSAAz=x?l|y=mGGvUp;O1DF zBWrnGTn!g!VOy)H+94SN@AkXEFZOzz7$!GHypU&cr)s>s=>gs}PAGXz`8g`gOEnj5 zW5y&jZY>4_D&sfzB7y0Mp$!G&FMqXf<#eNiY-?G^AI#i>)ggcBCyWVu?BEc$RlpFW z_qFhpTZe}oHY@%~WEqO)52n0R6m3u*=J%zJ!L2Y};_-NMC6?;{qlJFZo%W7yQ2jMk zZ5j3yss0EmkL~%Q_tJ-WWNY_G!kwN4^4$dz%|>96qhGVe8*o;|D~n9Lbf*20xS|dk z1$skMe}h8pPW*tYMSs6SGD2Boe=ua)VX}>x>Z4*(-rIizzNGG7G~!%MRWsGjmKGvh zQxy_{Vgx{c9Bj*L_B-|B-@t4h+9)Au^j9Vz8C~${G|rI|>r@LD)p&I$jS%(}_hi!j(D*Q0Xa4fF)s^IOYVgC>Q8%FCqQL2QKzkv9l7tcz)&vBxc_vZ33SX zkAmZPHM*zH{L?p9r`T_zKB>?K-2h|0vA49MW9(0%UxpiwTiVb$_Sv|Tgkx4bkh&F` zs}%nq;uQxoOYm@Nxp+7=MGia)Y=9(T>j<8xaq_Oap7)&Do4+7Xj8fW@U_4oME!37-BoQCJCol~d#7BoCX}*LMK6qj!g+#?QMXG1?63#-M$;xCL>?WSqEW)$_O!M@2?!}9eQ<@WY6>b-KOa9 z?t`$!uGm_XbC4Lkr|UM7ehiOZw>T6D39)!Wq>;bginK^0RY8ANnfOlkad}N67i@+- zBClCYfEGO;Tnwjt(dr;QljT^{5Ts|b;LxL6s&_G;+4PM$2nFqn9YM!psXXXgoDv+n zI2B0y?M+hjQZ#oonp4*-a648QLO#g)`9W;~-Wli5&vLWe`YkJfR?;aR=CjZH@Ts~T zPJF5!gtH#A+D>zE9knA_ztPQJf|QB0{k~Pat_{h@2pZ#0#rO-X_XfzmTf`JB5v@OwzdxGVltg2ILlDzA&#XI$lGA6fU# zjURu_(XYZ>($^fMpZ7=IeUh(%=>T03UN{5s7Q@pFrn-4KU#y+dX$-SR76yR_{Y8f1VhNmub>!eLGHfa~L9OUM9Aro71xKUQs`s6@@2-Tw;Xu?K0&MaxqVHwc=9Ab#H+z4(W-gU+U z3z&=Xpu{t+SesW2BGpCR+!C8F7x7%royn4x4#RS9zj)qC6)pR?$8W z&em>8o^J?V1{JNaFh$kW+oEWyj~^IQpPJW+3U@Tcq90j3F2Ls6e7KNm_1(AF?~0*^ zdH5Jiof?VVMup0sZ$yH*6>+S>P3vMJp7}Npk4}_%gNMfweHpSO zI>|shRJXH0WdmC>oFhT{w9P>HSMh`V|YzD1CNQqKTw6zonT7eaO>vMJ*r%Z&(M5M_9z)! zQ!uV0saS91yJCO!ucMl|YSCUtwW-GX2vrBzkZdroIAi{8O9~zj{0?8vm~lOwD~XJJ z^#A2F7G>$+o`1m5i__&l5JL<@d+`rG#iWRV?!OKpp8sj2iuZm{W?Q_>WUCA`@ZhP` zWGm1BNo6saS7T&Z@noI(&Nz~49)V^M<9mTAv`X#nsIk0Eem}IVV;6$xuHMxt!Ux; z|E46Y7ks_3CF*RSBPc!kuSPeNFAU>57+(kILG)61kE|GU>ejH z(z1wu1%o_F*+QDa=E1y%chvPSi~P}F;#vcZ1DE~+KZ6*GGl-!v;7&NjALGEbu+C$= z-a<@=Yd+#oA{TW~`v96BOJu>5i3~~S5_owvh#Y7(J*r{l=QvpfDZl*897@zS6aqmT z$j24Q(aZ6<5EA`npM!iJSV~LJP7D2UD^cRw2n_E0lj9|Qneh_MpJ4px8%CpQ^W!t{ zM;4Nw{@{(DAh{yL3Psege9O(XT-xv<>#!_x+dsf$8Rr>T8@9L5?0HBUA$ErOv0%gIiNMe{Xnb=NkXG++Dz=z=^{b=7;N)_l=$IQ zM57)e>ZmyB6-P+%V@!U21eWhxH{>?4ij5x`HV|MjKE{m+z@*aC%&IXT z1^ck=bpJ&P!;GAr5&Wdz4l=hmYeLzuFk;`xYd&?f|qa5P=1|NA+B!r3Mo<1_~RT&X$0hND69niEPr?seE~ z$UVbZ^L5>HaC3bN-s4MA3J&6HNU~CYh|-mCJG_U<3o%qS8#5J7iZ29-F9e1Z~cmP3}ukel5Xt7Ho3XY%YEfK*$%S>YP$rGLT2R0f|1~ ztl3TF*HLjt!5(ML9xBd#+c>t;ekFVwIGm2-uub7Nmx03$bYxbg;mCs3unAmX`e~xg zXskn`C}=)SXHepg35PTA9R{4FnQF{)NDjP12TcBbLE@j;K)KPl0!@c^ zxn4Ov5Hjj=z_jAq5cH-1o-c-WxDK0AjH${(^c09j3|1Cw@3DM102o8B9WCadEZvvcfCz;f!rLFQas;D=J_%;#$0go?4JQ-fz ztDM5c;LmfZtdLyd7mFdfQK5oOgvj(5gYHJ}wdvU}FtQM{yI{h(->_eWTQsyUMEc_S zcD6Y>NOwMOJdh(L7I1Y0B8F>4+WaP)FI{)8Um^SY>Q!$Q>?z$d|0vEfaKnJL#HyO2 zU%1QW2W9OJ(qbV}Ure_QahsY}u|Hw^_H^o1>-U_YBzfhFOOOT)A>C_QybOM*A1S4@ zaXA9=vk?M9=g4*t1nsR) zE7I5wuwRXK=q1(_etEGULqyb-3x!|Q`=42c{BMLNmGMB$cf_vnI zOh_L+I=BnB2tbnvr^(0!O@?=)NsFLKaf|O3izanoLyYg9^w=AxNAcb+e8{pZ#O@mn z2RO{Z8yhjX;Z3Y!^t({~9ur3Gyk7dkAx-oy+>Ao6-zp1cI zUH$PZ)co|l(t9|xb{U9bbtRY$|3F+&M|mgVeyR_P5h-yw*| zarXY4q^E=7@x@wuY;)Pfx8{vX2*peEiR({pmg)P35QPUJ3b}0Y-2|~T^9HgnLgCg$ zBO#WqsoBiMl8GlL*nov3OFYJt_IU@34p3owmO`vw(Nq2+H)&0IG(L%d&r@L%D02qo zr~eCz4nmBExJdOsHN zOFLuKZwZ7m;#S z+|!t%=TQ~9@H zHi`BvQlubGM8bBm5ycBB#|a3lp2n)73Gep7-3!xW0`o5;6}(YDqO3XKD%_UY%q$+VpYraC3T>!-b{iIE9PbR z5G%gz6LB!->e7#EVX)q&6zs!#%DLPH-IbB~A8b$A#MQEa(*WGF*rya=)Rt%9BWeX- z13Vj@i7!YMe9Wp=)AQm+_MfpUTM?eT911LY1?YZk!>WS%rL1bbcBYTqC}uCbL*$x< zF&tFA<0wO`)=cX_^f*0b;e>AFGlaDHt8KJ#TTMyrH$XsQ#DbKqc*qmEmf&dB^D^_i z4*NvizgnO8dci@qA2T-3u}e+Gml`>1Y|KYd7B){oH7IRn6JHn6uTnI9aJH7;#+ay& zz)dN8F2 zbWv0u*Nt(Ho7b?@A^BehhD6C{MnOiR3g%fI9ZPMj9jP)rY{Q!+VJ>wpJJojTBYYos zWT*7qDcsNVFNZ8zk*EMK|Dm?S=8dSwBSBGvwA9H^*i8ydi?86lLj=X=W&}lJ(F(j~QS8wlFNek{vHTVDEh&_mp*kIEWS5EF z7=>$d7~@CH*PwHvw=OuGj~vo>&_$Nb2ifR=7Pv+q71-m(p+0@uf?lY5HLNy_L4WQ^ zI1mFD%9cCXKOsqi(E&;QhZhr(ipyYKl~eEGOIGH!sGk&lpPQ|4t&DYikk`S)9i8~P)!d2S_oojwh7 zN`$}S;jSxK2YGmF;+S9u!t~r(FZ8Q}m0_k`X7lxdDHh0yh0?W%SdOg_w!!GEe7=DL zJ=LTsFQJdMzCRCpTk)dlp9psy53H%U(1jPhOGr`cbm(}#1Y)%q?_}{_r%Q$0WAWh# zW6;g!I~zzLz7=07{eHCnONi9b5UKQi_fzJXqeT9>8RnSP@I)#~Pz||-mYZ+6xt5z_ zxmlLWXKvNf!jWpN+ZWug5qzzyK@r-4IQVXBND z!mEZdU1b5H$RGIOTR?~dpjGW#eaDu;DC!^X=CpVfUh0r%W-cNqT~BB?R2XA zGFOGtqS2|}1rrWB=y$U9pR7k|0f!nV-uB%qA~bP>J%1y18~;Lgoo+}>3*`CHZrU_T6|KfgsMNEY36ofIow z?Z>?r`RV%*)q59?aM&VB9bpW3k~MtXjKaD>^kvU{9O41$a|E^^phg-#ZiP#K`XZ_{ z7G~VlPN&Jn>^_8r#YWHXr<|}&DnWU-v3h?9L3-({I*urHmze=X4OLMQDMx>itRbB=vNxPl-QoHh)bdD z<7O%5>t{hBJ|?vHXk^&rz|Y`B_-o~WV~gI;S=*}8%;qTj!B{zzn=%w}K8P!Cwdladf6T52q3Gv4f2$ALAe}vne7yxKDbs|Gc9`8D zvKAP_L!z?tgiwb8xaD!0dZHmH`a_XYic{1O`!LUXVVhml;JDJrlFgVFuqrm&>hmm- zuvOHG8o$qOO^w($tTR30%d*^a>Bw-E2E1}BRm9(Dk>#Wrf_Idzw3Z)Y!W(<@X*96a z#Cxkggh8#~p{6B^AaCyv$l*=NR!+U>_m?HaowBr7=>9d6WM|~<%zi*n{B`Vt4(g^} zhYSPqRZr=01xkC44^Wbx4&hd%0>E zqD#hEZta_47kL_D8rM8LW4F9?p#XF2cYUob&xva*F^Zov)4PEvfbo@}D*%wpt(Gpt4Es{_^x z(6>U$a`W>V*Nu`!qh#H;KRV8hYANp5Gx3M+!vXm~o zDA9sr^ztf^uDGJFvYsFCH5N2eDZmpY$Jff(_x^%x>|Z=#R4`>GgxK=O@APYW@!+!H_sH)KWSjJ)?FK12rXX9bTE@5t_( z&1o|jb8fz95?|4P^AOuTXCe}0#jAKe&E)CB@ov%QCMk)tp4=?uG@dNv5Q-)Qb@9MT z>7(JQEi9Q&@DAYkf%#!`_#m6@t+k&9eDAR_3fhTYp}eUI&U;oS7>Ft3wgf7T!l9sH zhO~7+zA558)#f^@h|`MxC*!U?+AHR)=zGEUc$=_tW^k}G>1Z?JIY=~-(sQ>!`_rR= zUXCA;LyU$ViGRr1uUJ|>DuSX+VzrNeq%MTvM#WmB3QA)N4WhCnUTM}r5f_HddsU91 zOU<_aPEzV`xw4Lh-P~tY?@Y^T)qO`sO8hhpvS1zwW)T_>0BE>zoe;*X zny)u1)y!Hp*?C&%DGH=YF~^`>J=mTP{O}F&U;IY+;a2$Jr1HZpx5{>sVNaJYZ?1pCyj8c8reo;uGH>HoAluOzL|X1l405N~a+`C6*lK%Uf#D6w&!Fy5S!?86T;A--~Zl$XI;o=ds`_QlNd zUY~SI)zh*J%X7ol^B#-)JU7I2{n}7#rD~G2S&7S3nRuNv1l12mxo5|f0^;A?ql-1X zg7Ph-hD;?c^YZJ;x%_q#CQ{40L1ipof8`y;d)X(%e=DZ;J^U@<&6;nJqw)JQXqeJ` zA15vhnbeS&Cbx0ac3rBK(TfOYk*tQzWsw}QpGETXEM$<29}pD(#oGfF-AqMhBiFD| zHZOxWKzErE-t4D@IiM0Hd{auePfBp7++dP@DtB&(uOV@{d9#tzvQe`4Ezvx6yD)+% zdHL7cC@j7F3p>9Xi!)xQb?7U%8r*u*DE-x4q^cEp_i;1zfx~(d(kh*SVHRgep|T5Y z_%Tdzy_}>fVU_omp|Z&3NXNrKLTq=X!yX#{l1ytc!uxokm_DezwlzogD6$~F1Nt;h zf<2of>D?*knm!$dMERvo)2G);pZ@GET3vMm25Txg!+Y{)lDg{Vd%^xTUad`Hc_|#* z=jSmA!`=M+WqQ=UiPNO!+CsW^ytLJfUZM%Z0W6+3k4G0rrYBhXEMIK7$@E3Igt^p( zg%wq6gfWGJeNRf}kh{{X?9WNj6nmbB4A%lXZY-B9f@1zt4C$(MUK*OR&RZVan_KQihL8uL#$H56A^TYT?{$&6X{>ia+_|mN zx%pnq$NWz0zjFl#UDy>pGLx<4|4NTKHz5YCXtx7nrH|#2EuA!;CFe{D2wnc;T{OtO z<|oLEUs`Lr{D%a^|FToUr#xh$>m>Rm6J0OSg(mt=6J06MhTAPzB+&u+F0NDnCpu+_kq!umn_g@T{$>t zh|l|2$4%eBLKYiuW9bj5Zlh9ocgjrJB)Hd{{*XTU57UKTASnLio6<-16vxkU`BD9; zl)Zr3p$NNp5@Z8YSFm7_@ED+q2KFu@v#~G0`|3{FJo`X#3^ogqF*Xi_iuh{F8h z!J%K8VV)#SSW3?@%&TRXU*E1s;+p8u68*4={d{miIOE$vPb2ML#2aKvXf7$xLf`^&z908>AXr2S`cV z?~rmJ$QmzcJ)3j^Y^`bK;?U|t%=XF3D@CfHjj2`az3l?a z;^+41`aYDm_Ig$3q0MMqYle7y<61MsV>sil3|Ey3L5)pFDt@;p!^tM`bOMISG(RI% zIlKpiF=V}PL^L|GOmbhaVd_E!HQJlDvfgAeJYGvVyVCg-GYG$(r)57H)xv5Q zW~iZ{w{POMpK!FG?dTzCk6O<+$g<_@lD(E=6jDaB!P4<6dFmPBtS2VZG3?{gS~}if zRWYh6 zwcfL_S7=|*W<#$y(iDA_qvrg-O*14ncv*J)-tpRqYKAka;e@KmJ*j4ZQ}B7ZDm6%z zL{sBqPgTWQei#%H;8a!R7^*65qN-ARu8|?i6&7`!K|d?1nmaxY*at*^1zkQK**FIs zmS#WV76e1+uvp7~O4bNZPVm4^hEC3UQ39zw*V`SEL|rR**F8fYXEWFPveC)eoYDa) zTF-J#;tIPx@#Y|CH)lfoLJC^SI~#oKQ}7jSww6DZf{#Z=E3D~9%sNwiJmNbzcLn1r z2rimeX!XxOG@yDldKGdU5j?-kP5S|{WQBdC_c=;zIAL^DhOs`njaigoM^A$BMoXn5 zaec!EQBvtR;b9R9=2!g)EtQp;XtyY;G`+2QDjMRUrxU(4jcKK&ifaE(WzN%*%l#G_ zD=Q72U7%V>i_lr&f*cfKT3QR~NTwE2?ND8i6JOLH_=mH~J6ae^qmQKW4w>Xe-jSLC zoj-)6HlEB`Ha_Go7-v*qbZ)SY$M0Mzk$cdB*=V$2_5^%bR0xg}HJGJC2(}Z~RaET> zySY!GIgMW7IDgRY$`{JxgN<^1VcXU)uggZNDK)rA|g~=XHmLA@q)L#?~&o{#1;teGm z9^NfiVDwp7xY3_+t39zB(50gAByGWW&$E@jd9PY4h036D&52@FKGa26^bbAyc6Nn3 zjZEp>&6aKwS(D$>Ld+y=kxAN15|uk&j}JoZg5NmST5#~Izw`wxuKgrx5+ z%2l-fYvz}s>e+uMRDGqaUuaLT2J^1h4RioSOG>Bo)}|Pog_&+?vi>zud$Xd$U>zrH zl9y^su~R8FRTRo{6m^J-DL@FYm*+~!lax1_QlJEyF5!^O2bU#1XK*aJ!E~pGf2EE- z3N4{yNh8Wys8bo7;=T@-($5%7D>|Hd2Iy6~IkQ-|ei-9ockN#zo{|c^sK$rT(JF{c zS}lx$^~hsKMSi6&`_SQ;*1ipk|y0!4gD-IsyWhwNfBrC? zNnV=TtGzUEwlWJ7m$CEvKj^1>UBkEuQ(@#f@uqFivkg=&<0?YN2hlu`--m$+^XgdO z;++NIdjk+xd`0&k{s;3w96`KgUF0y-lO`%Fx>U#)nU4y~yH`g>5_bIEA|J$k$!wHL_25sZOvRVKhPU z8C09nXP_=;h;xg)qE(ldRafNQi=~2)9Yb}~-ki9TFmfZro|(@(RE0#qA)IbJeqP9$ z+Qx$>@GqWkJ?~!y&sqO{HDu<@EQ)Sh_9@v$g>dw7pQA8PvZ3z%GI#W_K*^Rm>~v3i zC}=-XPvHR{8c@@ghIp;YenQBteMf%K#-z2F&ugq3omF>!Yx?pokI{YE_yjIg<0#&3 ztQ(iL>{0tiBDZj6jSsv{{6u zEVm8FuXKEY<=j_<_{O($2IW~YG;HwT{aIt*JhM4l1SXf;o#pnCa{DCuNZbp1xUC|( zr!}-us;L=*X!*Pci}WreW6!p8cHk~^SI#>@Ta_{$A}48-z#q01{m(xcw0%n{5~0$hcg!cBuhF z^ggh3$ap%YO7Wz7qn9>&ON;Ae;d@*~DYOU`r4Hy>NUFbWGB16@2c7{iF`3a*! z_NYkQNf8_;#u_!(xv_nPzE=1hHoyVjQH?w=)-#HmD&|IqsL)_+>{^yc8PF`Wg&Z}S zVUM6!F7SE<%kB@i(GP;x9`5qa8*5B7N|mDSbFSSI``C|qvHjHwuBqg8#L*rO*glXp zzasjP8ooP>$cx7Ntw-b~Y`M)+fV%S-UCm^zlJXMLq4aSea%dYsupx|{Ntub1P@)vZv+Kq=8&~~l(v-{L!7@a|B~^@ zd&t)E$#@Ka|9q0ga!oU)sLokmGxJXb6)Q~n-?ccQ`@}vNF4=57x`9$KfQ1c220YIj zaBfNRW*N2zxvafU-V=YTl~lZsCi;i=v6nE=!{fyr)}v8!Gh3r#MhmFUwH`T7%G+$R zp|i>XiXc|}Z~j9QE}ucPAWVU3h8cb8b8M)A9XUzl6414X@ZyCM&NR>ha^W9N2X;aY*Pykz5dr?E_4uvOQ=ul^S+ z&iBA!R-BOp#dkN$Ay_ikdgKlmmK4YbVc!gK>xw_q1v@FGZOWZc9;_lITFWO0obHsD zDGny%z1J!AK~w56g5r-;D$x>7^eYm5lOU;EunTwm0TX@LME_Kx|J6hvk?31Y^jjvn zUZQ_tq7xGRmnJ&T)P0Xce{7;3l;}be-HV&Lr%LpG6a9fiA9z(k+iar0Akha*^xG1> zjc6l(471*2`htcx9LoaXYO7FNW!}|%OFnnV()D$5%|u=_mJ*nPrK7yxLho1EqHwGD z5dV3h{&5;Br{rOO#4XK>xZ(V`TqjTDuB9S)b&pM`-J)$+#?MRN*9lPYecbUY1;|YO zK3$*g5D9B(*xtgDBBOC+6$Gjdt zA5h>8nT3aIhB%?-0M@`k*Ib@;uyb^s2EtO6p?Y*CwLab!HoAMFc4_NIBy6u1-o7=o zN2_$rzKeG%lxNyw7^bITb~6~JJ!ytXrqw*bD>;mo2jwHKnpg6~l}F;YagiJ*w2&%5 zS!JiyiYThkuI?#{QJogEraR@BXQho~!03}$Q8`J`=w7PZ ztL3yY?%WCCv-Rrrh>R>X&D!%hA?F4uVdZn+#JA!C|PJHNQx!v0y>aZm33ws6?J}-{GBS@Sls(j9DG^x0@m^!^oy{PGIRt!7|GyT%PO4Hqf&*P5& z2Zv3HfM@VW*bivv>(LS0M#*}zSUcQcb;Cx95FSWN_ZX+vX=4R5xF@cYCv{((U!6SO zi6S@02hAQ#;rJ`uX?YdyEj;VN;PTkS!T9Y^JbFA|81EHp*%M_Y?1=kpAq%uJc5)7K z1ihbfciMPl4H917(DDrFun={Y1&sa>y`Z! zLEiX3Qn*Z&>8Vpwem$CSlL!Az9!(JFxSDQ4<@lp@ykd3ys&5TG71N^P3xOUOp9`v#9gGaZ|RbldCd`QZd$1wU!w|LSjg z9Tj$?dD2uM&(k8GeFi570?ks4y{?@f4hx>+$Eg@)yBo#tR1}77 zx63%k;uI4)PQ_KW+h)QT1h)rgYxJM^f*edH1q=pE!Aya%KK_raPSNJIB*`kbf*ZZv zqO@}mQ=M_%G;m(r&=*eiho}Sv?G0FPFSp;4$BOJz+Iku+Z4ROqa2>%24vx*JcneeY)b9VRv|IdZL0|D%xjsHy`Y6RnvOf7ca%wB|b zv+%I<4zTlfe>D$Jnv8vnVo=y!CzM4S63+pAXqW_`2PkRv4(b~~@9{@s!c$)PXqOhX zhMMIkgFjjYfAm}UqqXoyFC&kGK1ucQJ&3S`M~O;uH@bi@;Tz6@bGMDpjV>Ap{H?7% z;j7MZG~Q#a^4KAe3`@W6N`W$?ihtHMt@bb2ol5hwYA&Q{(ga|TfcUL5#2tMIw?|B* zw=#%HN?!r~u%WLWNF(-^3Rw`^!ZvF52e}LLsuFcqZCl3cg!0ph%OT)wGHz#sQOiaH zgP3v&@T=Hxu&?I+zCCQx?W=0@VHu>%)QS3c)(fUwvjrynr6s@t!|-i_;(v{z$Y6QP zp!$W7V!z_9-fSv2{P&=EAygW_n`WLRUI>B4uRnXdOf-%E*;(T!U<#AUqeQCIPuF{8 z39X+sCVe&M!A@hg?jp{^vh6mu^{6kvT^~z{2$f#naod1e_^Xkjh1RP@L-l%Lo3F!q zb;i)V;QY-$xJBL{I#w8zfKj3O?>zn(oBh}cUQXH)a`VsQrQ+9Cg$B~i-zEuS#|wkS zn?<@;+=1;6d&XRoTa(V975%`hulb^ zKREv_Q#VC9vvYee-=Za-C=B|xPjidT3&f7+VC!UJOUTzbKPhn-qY0|96_fF3AA3u-u?%CJprxM+qB z&9E)lG=sE~BfI#xK;T>NrOwBeiKMm4I}$nU?@5@A;GrcaP%PG3ass{%47Q{S9x&Ll zNekW-Y>Kqxh@lEPrVyD5Xk~1Gr1?4F50s~~w;L@TCY@{&t|BS-;m%`^!#yTtRb@Ih zwvHv17eXj8718S_ZAxA%rK#;Kcx|*9RYsH?{@oOky*d-E|PM$gFb=dH~MR&+e9S0iQ2zZqqtg0BBuCR?P8S6c9o zMZ$e<(C!WvZwUFif_5<4X3vhsi#tNa9RauK9D7EzD^R?N*%dv?$z<&snbM_MP9%3N zbLwU0)W)D2v~q%kurJ;g;+-mA$4zb#uL|bOwToIBV>!jgxaK)b{WDs|hKk#;fs`|s zx>`zu#T~I;(nVS-!A%UQ94)Q=IkZIJ$F$u}oxNf9tgUPWp~CL)%YMYO9V?iZLouAg zL@DdR9>KK7{G9Oyhsw+;+m#WJEdjeT0%S^;y-&c@$0lZD&vmF=5F1Oqb+!L-#(Od( zOxMp*j63`nD{~ml7HL1F1g~SekbfPfKFaO&ymd5tWKV@}!?ednUsTpKdRTdKeR<>Y zyxP4?5b#GSMC~S#q3bZ6**-15?9VR0aG-n^gwK{g##%Fdr!U5XI!QP3^=u9S=5O-x zk4Jm%mX5g5wjeNWWa>baJ)MVmr@Fz?Y|Q4&ZPRBmulW?1E!?-AWbfp=5k z7%V|Coo3$X`frWJaXt9HjslXy%;qVmSsGZ?R5rD#?9!&8tPnT3!P~Mm^roh=%bLo3P*=jfX2QPE zR7O!-$v({lLI5L ze3Aa`0jizu3?D|KfOL#NdZR#^6iB6;@1{w2?`oPEXd3Cx7)7$CnNyo)`nZqzdG*}X zG&B1qcgBV4$-(8z#!6Z2!|bM+mCVvx+!@2N)mIuYabHv4Jxw#m`rdXUz$@*a(=`23 z1}WWq#^f@VP5R?oUe~94dO#i`@b8iiPs4xKo|ZNY0AHF3d>|8enw66Q5|5=1z(dyq zUj{sM`elO#haUgJpkcXb5T;a}1%AMn`IJn9Z>CVwNIEx5`*SSt(QR1jqT7L-K8dCK z%$J&0GQJ>7&Y%Gg08eStgH`;^;qM;)D*2nr-%Z|nBK^m#$pAoRQ`v4Af0(4Q9({nOFK*lV+hYmbL9;TOmCvdpN`_>P#DrK%$tiI>=_^{1A#K*hK zP)sh@HXh5X-G`lIjx)k9LWcC8=#hu*bHn!6#`4EP`85{9$D}BJo-seo=BJ0B)HL$w zt)idI_p;qS%&JX)U)_7u{eimos(T+KOlT5()@SPG3Ha&MJ)OFzQ}>hgTHBM)n4f0z z)5Fi1^f84$TF;GI&)w>-6ZexpC5w0;6<$U|cH;QI1Bf}VUt90}3)@4n6iy?`Xha!} zc(k6X_<6?sG@G9ue!NkX{^RVC+k`_gfq3K{Y^h-Veq^{|{YiEz;o{9~Ynq}tS=KB0 z=kh)uPxY-S8j7Y&z}}C+kTQ;_r@0ZIU-{I=*do;JBJS{++(KU=i6dWrX6<@y69?U>kO><6vaDSNQe4HJjL zM`g(dfEgHumLB=nmMO0o5xI{;R^h0+ZL+3pp*C?5EkL zvOkB#mXP>#yvFo%VQr_`oTSwZGS<^G%YQ{g&jI@_9vednI+#9To*)3rH$@KiBU6&$ zhM4q;Fs5$qie=hhv5g;@BHtNPPBSq~0+|@qidgyQf>_wKt1I9Ua&sTyUt!OKzV`!Y ztNrBcaHjNc&+Ly;u3t`9RhLdK_xM^>y3a+QHqcM+Sa=&HLuLanOXDii&C;I2o>E*+ zdedEZI9`NT-lCBAs3Sa^jp5F=+V#LT>MZh;4ErKzL8%qkc8 zAZ?M0y;VEzZ#l)hzZUIY?5VT|5W7`v<~VKbksXn$(@Yv#{aoNk7xP0#f{9&Yi*e{v zE9h@AQH1rtijDE-RdjDH7kLVAbAeR|mf8e;3J?z|5eXM_7<$dMOQq#SS5LaVaM^i* z$7Wod6?m*REAbc72N#pnvu(Pj7EC=>&f)nbX(`-DNkE``V*Yz$=r7x{(Qk39`>!o~IaH)jahv|Ja+F zfZE`A@o{WUN?4#Nl+`PA%Y9KQEruRQnTx4b%M^9(;#irRUq01+*;2TwcwvRw*g+;S z3wIO?Fcr^12WJ#uPWFe{QeQ>Ywz9{HE{kASoCp+P%bJJ{-v7o0fyNkljt!maK7NjY zY}3@o@-M}#Yuimtk>OeQzwvoekl<{P>$0G$NDA@{TIsbWNOw1EkfKAy8_KITNJ@c& zwqKkT$$4NcTBcU?GWOme)AfIRevB7#{v7;ik;mx%ApSfj^YD-3 zPZSp5{~P|ebhmw^xD}MB%K;^F0*%eE3lNQh@e~fb;LmfH)(v2-RA&X<>DV4d%y1?u zFj%0%RCjsSXOP#R0JFB`kD>qr-K+!seKXMGGX{FF{8scM0z6ELcA$TpO0!-xD@t?x zX=Xe~g05r6`jbv?ACw%rB&2iPpOM4cuV$`S1N6Tu?Asa8OKqUln|1|M$y>oP*HbZ# zER`tT-#Y+Y$mX^6iuQPfC9~Z3p6E@#c?M}r^H+oF*PBFABPcvjWBUGUsy&wH=HfOd0`;CCjg^o|{(c`#tY1$#@$6l$| za27{YW-BvdM-od-2r)C*f#u}(?3rh*XJ@G|-HMD7Ut=bk`py>n3u6Do`nX{_&_0yU z+9?%@hp1#^MXKU(3}FhA|g*$u!eSoW4m~{g5wtn8>?YOT#Q6EH${ZJwg2UD z`Ub0Iy+&sC;=qn3pDj&fXr7ltq+to&{0)q+xBpapW{t6WP|4G6W??OMzR@Dh;8(0Q za5C6y+zWJ_awLRyUzn%qGz{nno5)76#-hTQ$cI%SYOs7y>kGHWL~scewy4gem4p4- zkGv`keE(PK6Ka#*Uni_V^WSdPEjAK@Au#Z$eGcrh3u|{lXmdrd3uc&HEGBHTx0(*% zaPfc{9#jG)j1C}dA~s!WvNL;paQpw?jJM6HP{t4&(*5%o-9MYX z{Eg~<-|VYp+syV|#maxj$LZ>q&R-xpe@pCFp+RO-@KGFfTAEz2P(4UP{RxgH6v!X-5NAI8v zHZevZyyr_xkh7=ftGm_*7Gpyue2l}DLf-%4=c?o;xvVrr@%cRwVHYgtElSy+h20f? zD15{5I0ncl-gBCAY$&j8)2!vN7XWAG1Mh>cXguCe z&i#@TxAkk-{EVEtq*Yy-(~=EXN}QC+zd`}t_I>|V+Y*KDBJWXvUnd6@a$4xb_SW2g zTa+V22C#Dvq7)Xkb5H!e^g`~$57hUm@y#{9e&ZX(LtCWmHNN8<hw^$mx_;SrZMduVBATB%y*2kc5Id&-3B9E| zKF~fY*ztFiVas!yK@f;x|0o^sb1@s{7VJp}Jc7kY0=m-yf6HqN1Z+zO)bk_=0h`hR zKOL;M7p5wK;hHGeAs)jVD>pFgSnJH2zQdv;LHJ?QH3-6VRSroKkZ0%^*r z+)>gnQ}-#U`yG>0h)4RJzi)pe9y*VqvA%s+ zJV)`Iz>}0p=31RM@Fyj8N|~K=D+RTd5lEeUBoH{xf^Y0Z+=-<@H$MwqfhaRgHopiL zE6`3U-hODRRqf~YKjt$IdEWdnG_hl@)zw~ZZ}7rKOIQzK@0Z&rB#Z(1GC?3y7sK6^ zzzwin0G&9=A6F`O^dGXS#|`Ck9g(MrJb7pum09$2wV-5I+aX*<*Ws-068}5$X%}w~ zX}b1E!ai}u#kF5tg1Cu;bkB~DNtf7;cgOF=wTsUVdQ}Fji_w=M?E;EKza;s=(>vi;sPxI#)=!CU}Aqvl6LWlzsslZ?TilvZKq{quiPxDF3&LqnrU}suJ{N( z0EDL)KAl0;$Hd1t%{xx%A25p5Z{avar<{^5s@}&(5O?wJp@c8qI~0GFj79(3eEN2% z>;5)`%bN~ab)zl(r%sW4pCmuUJGYB>4V`OMy)oD7lS$bh3)-8Gylqm06%@Hg3nqQY zsya!)PU)X+!L8gmuK=>u_Zn_Sc=7J@_#DjRvtK?squX&Mn81A@>9M|6KK(H}mQjV( zcjcF~oNCHh+#_XZ_D`jZ4}>cGUdo8m&!3Vzeng5mKx4q*xc2!jJmUmDdOu{vg@pFU zKgIp%{>~xD`_?e)n3mTvEkE_9<=m;( z!r;i0L3gx@VUhOV?9RT38;^H2Rk$@*bN5YO14eK`csAirS5hdGdAeJ3?n%V)74Fgt z_}x_D-Yfp*3U@*FNhvjdWVt&!8$>J`gX3HrGNtFdgXaPb#r&&;j+0OZx$=Di(&^z+ z)%;>Q8<7_gHjCOdH<_3Tm0K7dX2X0Y;5`sXq4{&5*9++~YvC1a9p*4C7mgb#5KR>C zCu9Nv7mmA5g03LhoDb9m7z=O22Le?JDl$>$@1<1mvzo~wO%MAcXIv{lo3T(POxj`;e3= zSwN{d@AIxhT06OzTFYXjt{q7M*rJv)u>*S*;s=>F)-6YV+#XXX?s)g)tvjTvEx+n=xQh9uWxBkYfO7{0Om`#XHYw<@DgS^qahlGctR6f}AWA6Z-%BydR4 zH{vEm^-fa12mi9nKSI9wBf+=@LXYTXXmkt?eOb{6`Ht2oT_%LobZwW9tRyTBkgpFU z&qv~teH5G}E+Os-AsssolP)2Mykm#Bdid;+hCwvD7*AQrWm!%fk|cYflk~_!7>7z$ z7x`P%tt6Z*{oN#~d7nZPWbDq}Ec))&;&$cMWs-NvuCZFCUY9W730W2mx880x0o0jE zq)8_fy++!j+&YAI;b+tA2SRB|f@P!zrb8*AQ0V?EXDSH&1=Ho1x`i)~16=>`DJEvh zHD1h4iIFbslch2BQSuBQDJ`2P{CxH0MUo+8eISf|^_3%xkIj}6Xu4dM2t%1==_Q%j zu|k+eE=JI9?bWh z76HuagJ_G8VDTBgK)M`LJZC6mtX6#d*}D|H^t3BhzNddlGfU5c;CO zV4j4-`-=plzu=qVn?|EYl5xq~dFmdK(o##E|EvD{{p*Lqk%L`+xc{PWKp~(o3-d?7 zPPGN^e`g5Xz6AI$aYz3hbON263sA<9prUI@!<2x%BYp%LKm6ujLSQWDPF`s?56V{N z-$0B+Kr&$Q1TBQY6aG%c7BG$!H&hCR3l~mbiXS82E1;KiJ|vs4=t7OnUf@klOaCmC zc;VL%QdB3!vKZVW)Caa)b__y=9)LrsdjLom>>}WG<_xH!eDikz<~x#;p;-V>bs>6! zjXlZhQ*8VyLWr)@Tl^+zb%i7Y0qR1}5JLN_rT8xDUO0P*?rdsCK=S4s5-?|9q9IGK zl@NxvlErJ`Y>8i3LzFdVhoq{xL3!b6@}1Mdr&6Rn@ZHvYnV>8#`1S)X(|qAlmhx%v z&n(-denavLFF??Y>oiD+jE;-&1HzyaizrpH=^;>y z+0H-<|DC~Nv(Hu*`#s{$V6mk?2D8{qivbpU<^YTR4M{1xT5JAkrq!~gOcsyDo(Ur@ zGJ<6?`#!^C=L`8#o}2aZGd#An><-DJJmn0T`kpf*6uO~&H4M*eXn``;OxI;XP>cu2 zW}lz(NDLlfrt^QLqxvT@)B7kbE~~B}mEckw#w>+TN**iUAm;XFLLq2z!8U${6*SB= zL|mlN%f`@(ZefyP!cwl8X%}NNzfHO%Usf?#ZE+IlaoxHun?RiN_VIW7DsWn=t=>ot zRJUvh$=MPKADDLCk#-R~Usj4`<5*snysL$clPow1WaUi-o^KQr^fp)OKBVYB%(#s` zRitXGJMmgB!HG7GNTEaamcS8MYS)l>~|4hs~Wzoa=6X#>91XQEbt5e1vyU-u9p*o~)8@VNbhS zMe?m)Sw6aC#)*Wf>o^V-=^_iqCBl*}sZm%;4qfmGi*2~;0qQM+TSO!9xhfkGAx!t> z4gapFy7*0>MC_Ancdd}hL<|G384@lUdiXKj3Q?p4kreNcb!Z3lAaUO_MC@Q0PuvBz z?06T4EZIARskpBmnBFD6MwX#&;;Nrj>TPw&7Mmr5g5y#JQn~)&d;d*(QP4Wh^Vg6J z=EF{!)qmyd8q;5}(WGGU5yrWXxYS=aoh?|}m)mU8Q2*lhg;P9~$L9>`FN}q(<9!$Z z+$3fNU%dAmKFR`Wj`w|dx05#^9BQ|aG6t}Jcz_&?Qk`td`z~K%@*|E&Z2U&?{6RC%4v_E z`PF=j8yV`4V0Da%6>%fiiTgQK+K!AA_cN41xaH408FEKY6;Uy2wPO%Bi-Z?W^ffbM z4@Z25!tU%bsA#A>_-pRyF*w5{s_-4UMPeehN?#-H=u({Xh!I&a%DI%LCSfv)5Fso@ zjJ$qy4-gf6HaFr!qusTQY=0Fq3A-&K+E_K zMQ0I>W(w>%__Z(};;5{)KN}=lSOofe{5w9sU&10opq-?_8O+v@*+V4+^sR*MpM`Ok zf_#{%drtD)n=57R#w+u5;f!1{V7E$~3p7R3=3WY^Klf4&7k)fsahP&5uIjX2r87-0f`D3mxoZ(}Q zR$ks570f_-MJtwO5j+Q}A>un}pI<{qOTWG&0Y%x6mxYLR;EIK$8XlgRHvcVrhKHvs zzoUtlf>+XS9Ar~NEX`#JP*xstEpmC4oRfiE!s$Rc3ERylwHgSq z#dlD`h0R9(gG>2a81XJ)>yli_EGK*sB0p``0i-I@xTfk3~04lccp5`eU0$4-5My?RteNK z?4T4U%a?8p`iGA&0Ez4{4l>aZAj(cI1JW; zq1kX)?+KAuwjjs2BhIgMQz${X=^&w(no5E=M1phG^xb~a>tP+~XKQ*53VZ1@g09aD zns*=Vo=1yBQiu4Q+(88fUQygbq-JES&aZ@MYmgSMK|*!YLGuL@mqoHA!`qVKRxdUp z}kZ(nQWE5`a4N|zRmlaCoEqB0cenSN)MHe8E^~59HEbbzS z73P?AdO;hD+=WO&RXCfL!qQAZ+&cIa#i{<>P5-P!F4P0RI^CUkp%gIsTKUQmo{DD~ zE4U#GoKS9cV$MJs5vu6XB=KGF8g;@<$(Finw8ObcuS+;YAiImMZ$8LnNFetytUKF1w(NxQ+Qx~&ScEqrn zPz)UJ%HfztF@FC{CdG)K^{|T~z*RI{nAUMVN-q*}n26vP$|0g+B_FyJzIyht8}r_7kYXJI-o-lm1gu2__c7Vi;? zqWt0+Os8xme zgM0w1Z2$X*k0G&Kq4df^%E#VU$||BP!0ki;j7)O|ybQ9rdq+w_m1@oyqah2flMt|8<(e}je&M}D zS#wmfdGC!9@Syl%g8n<%=3qvs8CaAN`jj_+nA;UJ=?^nPtIlAAbi25p87Ev2Lj?4r zM*zk<;wrjCzLT%T4^sdSL=ce+M>AS;wrkoOK=p+~_!vb4k=_ZD^%?$$VusG01`9J% z(y9b=@)!wVr$azmemPm<7lIin=_TR>0))8G^M9J`^8a6q&O)BXp*4#=M&}QSDdBaD zm=ebyWO{0!p(MlcFp!4hVf=Tz=20zrK2rxQll}3i)@M?jl^6Q=|E(|^UPzh30bb|{ ziG$<#8~y#myijgb6DZ|sgKGS-gO%!nc_uLl<(%OV}|3->mg8N}V0>YsNX?a5$ztYy4C=r~7H6yb;vZ_Ui?_r0>RA8+ zArU57@18Ikj;xV`L~Ekw$x?6C@Y{V1fO6+(2`JtDw`X}&PI3LOAqbIE`MxRFnKqF% zLnTkuL{Lvq?F11}i8daM7G*rSB4PCL2hP_}a?P*5f4}I}l?IW6$ZVk1@`uaa*5x2_Nen$>07S1k_quhn}UQcyskP&c$1}ykr5&)B= ztJZ9ZUU)BQtvSL#EWDRgtXkriRSRCCdI!bBV5YY3D2?ff+yYj<>M478(@79QjzRkA zXq3X_$V^pAACQ?(P7d=)A%_nAB8n6l;1=CDS_}5GbnPY;^I8t*gq0EWLsNu-O8s?%n$@}GTD+Y7{&$DOoUIG@ zN&8p{K~B-8>$~`KnqO45Gw7gU%5n(Xo<}=mSC0OyLLpkVDLuw}fP2|Ydf7WekYVtg zWyXm}u9P%0EW8NeWs4(20|7uwXd0R*uwKg|*O?%3j`U)ETa{W6!yyKM&Xds)?JBhX zAR{0Yr5K4kNQjG9;BF#JHCc>Tuu;579`;L~iD2839g@xIOGE4yQdW(we19ltN&zUyH0>)XS?fSweEhu=2=aKjwzFvQkGjkT!V#2Q6%5VBY zjqcZ=UK2%7Zbaiky}&Q9P}Q#A5FzUOcQ+aofeB`hVc{^JOm7&Xx1R=G3{Bc^B zslaxIN`Y2$7z8@Ney)z5=def=^(6P=y~4SZfm-3;`65E*iwv0!%U%KdU0k#;Xw{9u z8Ug14F5F01ZaJd-X8#n%`c3>G26iJK~qu@z2+eck_g{w0Cg& zX(#R2rN;(Ra~m&{o;yQ66P>=l<<;+;|CtH~_9yz7%O8us#ZMEQ5q9ULTPJMp_^@HO z!hG`pC&>MFaKhV^VV|(pV2`P@ z7=s&KrrZs|2^)M{cy*S!f z=~+o%C&9b(8g?_Yvx+--O@UwE0h_z1t^RPbt+rLB7`Jexzuc)gCD_eraq=In`<~rW z+zIznlK(>Ot(+wpyGjuHX^#I_ z2A%2tVAH0+OL8$ju>HdTb`K-Y-GxqF-qLTDbXsmZ;anYkqK)6;gLcxLjv>c?nF%2=kr|0ac#eI33DspjQ-yN`*UGTjFvaX{N+4)xG$Vj(ZlZ>iDkj2 z4t=9?`}dDLbL;v6|obLQPkfCu3NX3@5kL_Hyr<#&1h6 z8h@}4-lK-MQ+@Ct){t5fQw(OBZzy`Kb||y}Lu<`Jdl$`pEaLbAP3Kc$V0#~p6(bPej!1mMSRa@=RP36fAk&+#?ZJGNwW8D@D z{9Djnz{ayYzVzr0ZUFO&iCb_ON4U!05cahtd$8oY>?`FQo0cR4Q0#$n=%2RQ z&cqri;A$zr4#mUnO*zuvETqtr!lqkKHO)KSgxP}LQM?qX^-I52#B1NJvn zY2uG)-v!+Z+uU>;_RksC z(SiEC`vZAf2U?vigR!aiFFXLJ34rd+JhN%=ktLXAD8ICRpCuNpSy%)0J(O@X*c3=g z)M&~t%{$(dYJ(|{HXNUzZBWxCVyuBN!iciL9dCgCj~HX2K5c?mpN@Y){qCXm8?yY> z?>kzW_f~1s50Xurn?KBn_2$;^>dEV9!br2?q*k}N_uFC#&7Cr0uG%2~0zWTtj3c+L zFQ~!>`Qe%D0ajc{A~Bhk;O|Sc_Z$3e;_q>~RNjEN0k@bymouwW`&0AZyvNWe@4sQ; zz1mDL)NsHws{Y){!Dt zDcr3W%5=Gu>=xzO7ZUqaVMtoxG317v*~pxd|&q1kG_A*F}iZ}I9( z=qb09-HXf@8{R-NI$yPqH0%?X?+x>7ib$~&-tTFdSZpbvpa*Fm*7l|NusixG+TfP@ zc%{qh_s7D1=k~SRkLw)TzBlYV{1m2^u1f~C#{<^$?PAZ&DJ=}U!6y1E^h|OqwrI*R zXBO*W+ViZI>t9DRS+_$g!pODk5RdbDLF#RD%T9-nU_2$%+?X``T+iA95bXrhI>1pm860a(_ymTb#+f3jLZt;4C{CNWPUC+<>@j7vEtgk$|v0P`}QD5z&JXOZ4yL5NXT`QuY_F5U%`mhh6Lu)66erY{^ zkeS3|0le#?b7W?|wOn3Fz`ECwPRz?BS!u3Vuu`_of&*bh#Ri`yv{8s$o8PL}o zN$h2QY`UM}-F{SQ$@bm6y~$9H@P<;3ICa!=$_kU4%d6V3;KC4Az{p|3MV;-v|3;r_ ze+7AT@4|p{UO8B#6h^m7aUKkOr7Pr22=S~0{fBZNuirhtGnU8=`q%}(vMXdgzb_E$ z%QXow+P{x9nDu?7pP0Tt?4#U(?>&skycgin!9c@4nW_PUv?1T=fNw|0o?v*p^)NksFIFn#v&q>5i!?i37*ux4~!#oMCWNW`0P8v;#j zrA=@2UPJcqq>5FwbGeKDPIi+dQ>bm*)nD@=&k! zJZ~$uThAX6^{wLeh;!d6Y)mdUy)Q4;#B*C zOYiS_pBDPNrc&we&-r;N3PpteuEiby-ZvzC%8yO-a*6&M6a6cRo=G&kX(bkwE&yvj zLU8bxG%&?~HK=L(WwZIUva;%?7=Imttp4W2C8FabGr@e5%^gWE{*y!2mp~3obrxK^ zT-4lV`5W%qaM1cvYy4a)JZRmSyQ5KlzX{(DbO8h1-n)TLo&zJ_jRM_^Ul#$Aw;sxR zpzp&Om==041x%gP_=X492xC9~?C|_6^(s7vtUJB8VFj*(*09jg_yg2;&?>Ar3WNod z6~a5)fHIc&Jy31|JgnA~3X~riDE|R>{6cbN>bH9OdZVP1q}=ui-Ley~Ynuff>~}qS zb#s;fg|Ji0_Uei?0pDv_OR<*!EyePLxb7M2&ZirW{EdKH=x<1Tdx{wXjia?~UTa6P zx6x5Z#yZSqvkt-dmtrzE-GUb$$!Kok3p7;Jp;~vYe>V1S%GhE z8VslGD2x?+EBaHAInZ!YVJ#}J+6b(_jA~crH}uv^FB2)?PWMs?xUVa?+Y%!MfwBbN zlc_QU-u6TE20%+;cLNFIa(f%NR3wmhXk_9_0sr*@@IRjk{)hFM;M2l}6Q(o6Rm_5d z^HKmN77-!91xy0!-tP6}MFQG#;D^dJcbxDFkogADl|ovm1DL$t{2~LsMWA7((wXip zrZd5TI}2tHg2pt3R(x~wL2Fh8qyJ5r9)qpA)l0pp`Umr84SnN>$tyQ*p1v?0ZRZDL z2l8Fn^D*B;_S4tn3&^W+tJ`q#q)yi%UJJ^C9L0ZMA#-b87vUygBLPlSa;Ax?9SuqW z?u;SH?H}4Jn~8ISIS^Jm`Z8|j&l7F=Sy^1dCYi{m#`xMgj@r?y@bWI(6aPUZk6XB9 z*>?0+Nz#6#%Z?ru;M#bbmUn_Au9bGGdN5xf07%#5#)g)J_SKyGycS#20$r?B| zY)8iudKK^6X7Sq^-AJ5tS8H^S=W2@C?n&J8>nDx;?)UtC{Myk^_@?Pys`ZW*u)W8Q z)|1I`rE<7JXSH-^$wB)qYx-%pVLZhxC0nhE1HKk}br&Ta+2**?kdh9&)0%#OXH%zl zu$oBUBc}>l&$BI$j+WB$eZKWaw%IFZ;PJH_>9ki*#O17%_F>3*`sO1Yw)-X?w=`)z z-)cwO#T{mVU)R9XcC-zLqm8zsqsZJEE#jMrF9Yq77-`RPsYFv#ZsR)brHY+ymI=`E}|8Ct0Y*F>^b9VPK-{?&r~WW8X>MpiwL{XE-{{Hx0+e@S6`D^CU`X|`Ve2s zZKgEmX(=ssVw9spG$|@gv)pGTDk_*^N1OQuoz>EaRDH6Ybli4AQ1EVuIL}IhL-wbs zcu-FwgZ9Vl6Qt+t_3?)iGH+|I2slGUT%E@q4eR+WY&F^K7GtrV|IN;Fg&CH2xhuf) zTDCu6>_-cWDyFNIv|l-s&2s~Evh>D4KZpw|#G5Pe zNk_5CqIKm!Hf0eUUiyP<^Kg0Ct$5R0w^QwLhUNTFQOPUtYJdn2Et}*SQg)buvz%7YHrd&5)AMAekO*8 zi3RU^T6HvWWi{#4NnmTs%mR}$*tAZN(Q#$a9Ry@9Db=RaY>pUpS3Ra@U;55BzSrT;Y=v$ zTo2DaGoNG}{+szUKCbiWnnCl)l~yvR?DfT)nOEFeu%6cm9E;}`uea8$Pcp-3M8?GW zdB()rVnrA0q>?^yqB2}Msbnl=QU%@b_sG&M-Qce7A~b%0Jqa_3kn~JC{9t+}xoMm0CX$Xd zd6#Q|G|UTFLO{l(a}+Ti9P(HSJJYjqXz(!);e<5jxQqDOuDG3*+EL1dV2P>6x7pT^ z#?zM$OvLAPB8D@virZP)B;P?#YLYnpP)%6rMNqGg!Jt}CpZn@OIx{xo*GdBbs zS6F~hNi1Yd=N*c6cj66!k^=#_iNK4pwgrk0aC8uKo*hk&fID$=Y}csRu>$Vkfo0A* zVHwi%C&bx9P|j+WQd6X=GvYkmPOj;0(cfc!ZtjYJb5Q{CdhBD70UTzx4~N3pVt+1M zrcm+8fV~qB2aT`r5Yh9;C4x{6F;3z=ARB(!_e;`G0u6h_)9^l@B#$2ieJ29;MdiG$ zSI!B?k0WN`4*EKiZ&=a$6t|TEDzjJ8W=(H%R%%BmSL6EWDP?#jj&Rl~!!vm#58d`g_HIxp!T zjHTMTx*HnRyKF$tm0o`aEzZ}FAhiSt7DDY1Ht=4h^l{iN`Vli)Xb&NRQ5=Td07^*x zoQajtB~m{s1pg~&@R!j#H|RY5OF{#@k;rMugzgG^N5+01YXhSKjmhk#U!3Ml{&mP5 zcTq*v9+df|!m>$ApUtX0Kj@D89D(Yq`GI5zmaMy#__~|9<~61~mc-iqvzoz~{Bp>> zf+9XDE1CSu+AkA-iNu!?5p=Jh7!z^9ba(RSQW4WiCjYwT3tGK>5*d*kL+_cIT>h*q z>9~`)bx%?Ls`ROd?<#yJk{j45R+Q|wq9u&IN9laJ^un2FC*>$JA2xhWQkMyMX#k(3 z?DxaN4bwy?Pl{eou=V&t!3Ldaj&i=REBfoW!n9&HIC>JIXgK7YsO(*A<(3V1FR6w7 zEzzBf70nW%PQymoQhoMfgSS4Mx&JykR`*|pJLM_UXgfb)+g-trz1@C#9KRe%@pyDt zLe{-5(GYEZUdh6!b9_c=c2?8dp4f{05fRQxN#)MS*6r4K+`P}m-YX7Mjz{)e7jhm8 zfzi_J=sZFrj#iD1Wj)m&-67;m3Uj~C&H>r)wyQF0Si1!mIIBKtaiUb^)$QGoJ zK-q0vPmtqEJ#IOKHBK;=K8PqKNQI7ew1+^MC;0@~(LBCJ5@NniR2tnBb2P?YzkRp8 z^0$OIu5m5uWj*nKFktJr3QJVlYj$(QK^>=e9^tri zcN|wWe>Cq52m*Za%xO8R95qjGAx=kC(T|@Obt3A$qg;5s<=e?%d&G_c!_wA+6DS zz3{|&$YX^6()66}NH≷C#ge55^qSO^u+kJtaG^m2?BZI+Z!Q+^D7 z$Xu5&=jo^9#~q!6lrHG36Bt?1q%%yyG(Wa6;$D$cUiC)U_coh9DQS{oRPDvVNvkD2 z>JGFbnV90uf`H?1N?a9Yz7v_A858SM$^Fid#ISVQ$xX?X(jG71CMW+ndvn8PIhnCr zbWu-opf74h$>qvtq4Ken$Sk|noZA$m+9GNzhb0~gh*n5)`AT8KieuKAn6PNm)4kNo z55Nn`Myuc@T!t4E5#TI#YQtOsJ^uX<1--tBcx#p!+lCDyT?#jx5E=(E&`dHm3x`)v z2DVj9`m za8_QALj?=6WqSw@n{g9o=7GzxutLv_T1$k^DC8?RDRP!(_$^;s$9)CRNh+qnQ}QDW zgPEWcy4i?GFEAMdt5sxO3cV2IWOU73Do4D}Zi^shg|ED-llK%F*9k^t$$ZfHbC&tA zLg#~2JZL_c70Hz{N@vUm#dzj}%!}fK4ZG#HVUv9I7_FEyRNP74d8qOxxKd|3 z|B*nlCAmS-|8+w{g1#OrIxeZ5pnZ{J`ofS2kEr^z-AV1Va8eP$ioOc=oAuFK-tvbX z>40j;U&$&=gwp%Bo~ z7t^lxSL{LO%;Oz3@+`7!o;TVH=^ za3iBCYLdQvL)CK_d^hv0Yft-%VM?T9yetwju#1i#rmO*D&Xjik!a~kbr7Xl8@e(Qy ze}i8m+|Vj1*}S_|j8?f?u}a=7mDi*4h8ab{bP;PL$#h}GX^Oof2N5uz{}i)@kNd65 zx#PS_ZWoff&kAGj<}id=wa!?aZY=J}ia%E@>dP1X;d_YjTqZul5cD*rOXkp&wkKfi zwQJJT(>M!E?v9i@sqCSTo$F4E7X2jFd@QaKlQ(mRxzpT5_w!bBA#BDy;aBp0&rtR5 zDf34uZ}EkGyC!o7g>t9VwWgb^usqECmgkreSFA0^t~poI;C+cVBPOTQ*PJg=PM8b9 zr)^9#YUD_hsBay+59}IOC%Afaf@|OTakxIXpaZU^q7JyYA1@iM7e^%E>VLFwg{Cb* z%oMvBjrOTY>?N#3(zjthk1dk+0x4-N{SpGXnjq)7$u&|9OgTOU#d&gM8kCppzOo3D zwU8t{;v`)DI4`-!ns}mIc*^mn>q_lBF3Np{`%q0gucv9xza}d!D=pUI=AOp%GP`D! z1XJ58X=VVE#WA+u0Y2=d!A`VBm9?%n90qUtk$h zfGeiU@g%F5#{F)s+-+DCu;=uV4k7cSbh9}-JDb-Z4R@!FF`*ffaB z+jBgbE%x9BenNp@Xq&pBI?C_+VWS!wohDd3eT@QOOXJ6(ZSB;e&If!9Qp z0^N;+(f}_zUMRT^mMFN!T?-N)1*6jdEc+}IN&~K<4!B-{Fa(Tpi&cW_IrTwhJQoPR zCYgfv@TZ*|Iw^QooDff=Ro&OFvo<&ER4sT)1iJD?i=wd>nv^y^<@@JJlNSA)*IQZn zM3d%S6RemfEh?9xm6QbR`2%z4)|L_HWd%r2&2^m6FL)9VO<#GP@yQY4Z@#3|u1fK3%i47VdHLElVqKFGm?V29ac8JenV4dyBL|UGuLCyBV{DA5m z0jRY|3<$&HiXB9D9)>wPV`I;X z_n1B04~uKv5!V+FDFr|a42A;D*|{Pn(HDKCdmeIFVUxt0kxK<g|KlPF0C&Ta6L@VIB=majt;K>PJQuvIx0n9{Ex^LtuG#c0Z{=;)F$bR zG4^~V^YVDTVXzh^K}TPdMaF4;QD)Cq`hru+kh;V47Xu{O71uo7>x*m! zUXs2z1m7WhMPKZO<>KHa=?lP9A|AK~kZUcA%8&<2=_!3t7Rgik0=SgE&~W_TpWFo z?dXd+4wI~5dAQaN(v|~~rE_O}v4Z~Tq%Ri0zK*_lQrmRd7bokB6oHSvm~pyla8D`v z0cvTt~onZUnKZ@5#6Bp z+wT3lZ>k>Q3g9F3MXu5pDFSI!WUSH`35j&H`eKv-o1`z!7GRaWDA2%Wk51JWbCjS* zU-Sf4Av-&xy+DIH;z)gwt@OnlM_;Vb_LtHZO6~k7^@S|Q>c+pg00K(xu`}Ur-D3lh zI=aW~;r&6A_hkR#JfUn_;4p2a^!(@WFU&gAjc2Evj2}@fIDg@Ljk8X$4s~KG#GkGQ#TZ<)uUXtf~SG~lqSP@BRcyR z=f(Yt;!ger3EICn|KIR0?(M?AxR1^$OZG3mCvrvWi}9y*h}yjg_X07XNEsb*0lka} z75Cz7WRK%sd>6yHTmRx1{Rwvbdx6jf7l!cgw78prQ2v0f(PsV*%+z#}Pe}`e*11R3 zc^TL^!u?oI@0CT9)X5)UOGlmj^6MSYzuVz{0RC6BTooQ1d>?!pS31qzyB}i{aCPT? zd@GToMId*I8W0G*4Dg<_;uI@BUWzwzkVa0?E<0f=#~XQbkU~Ke#=(R$a*;iMm}Z~B z&(rA2!$7(G8Qya=(Y4~abnA^Ufh8Uk&Pq{SPbrBWw6^*I+(goYfB>D>p6a5EQJ|){ zC?x>vsGLH8bzGD;6D~@*UDIEHjk_qK{{>21l--}#MJcy-2STf%iEOs1trq}`+Cz2e zp%v+&+AKU41}W=@O~YgP?GYYJWrxS|G|+VCvD^;HB#Vse5FuJ*j2##k6R8@gCN3;Q z{yQGaHxM-7s6CcaHsAq{TuF5FPD_x>Swm~-3eT|+ey@bM`y;TYin|U6=Fc>LvO; z+T%;}XFfweJw~r3_vc*1h3?Oqug3cm{E-=29US4$TuWCTg+HT+Anwl`t$uQK0&Wl7 zrGb0zD;>aXg~8&$b#iKI>8+!1YK{c%zezuBrK3{x(^_~mKK=!J#$|VheoAs@9;0V* z0>qv9alRHjxHDQmm38gU+@e3hZ&3P)T*K2kG~Vza$)7_%ouZ&m(ofk6dgbo8lAur0 zPo3PItpgO?%H2`=scU!V8OQ`oJG(n^Wrt?{5jiyEpHDx12VzXoPXPptqn|F&25dG1 zV9EMP4|JhiPgQkl=jT|Bi0HDoe(Ku$N$96+(N9X%9i@I+Kp%H1rkrGj`E2zNlwO?4x640y}8;enXhg?RlElP1+VL zxtI64lT|wuO<_v8hja>Ye})3g*+qpTB6qqtBqL{}{Y;ut@EjqpqtlZ{-dvH9GV8FK zS%;qpd~D;>0QLvKXw|EB(cShlg`EK$eFT6d9RP~`huNb59MlDXeLpvVp=r-BV>8{I z@T2N|%9BzHbe4)IrFK`g^zGQs%<m}YCxc1f(X%rxZqqI)Htl6UP?I;i;*&MEVNwQVaoM%C zY?aSFPEWxwD^ce;x1HlLtaWC?2h{O4a`1TQc2soSuhZhQIKw@ND$||!0D`&oMAdHD zV~}=zb!QHLhqe@9P4X7_1SL1{rgCe)cubCOH9U>Mebb(ElI~+>hK4VUe`I~E4S9Sg zT&rBkA%!WUIT9SoOb?q+uVtz)`+b?Psb2?l!)fqd^nx3A>Qvf0 z7`;}3OM_oagA1sxdh1X_i-KwRCp4!oTJnq7uD)6p4BjEE=AOD7C?T0s2mL7xd6ed3k`R z94MxImN-sS-LR@>jJbbSPL$#%XWD0KhZD6}WJZN=j-E00WJWK~w{ssBZ$TEfMXPe^ zJjb`&B>@JuUWIke6G5U6$>HLP#kGhlHyD>ivuDP3iL8^Z+5?mL+}TTcefM~c@DD&( zjm#0ZiM|kIaCPfp9=gRdYD8q}@d&$CK{zW3;egc;zz-Q2Dd`iiYm^woI!}*ykB+|`6UQk9 zv~cc`pj~4N$Uwn z(BpmI`Zvb=yny1YCrF6Dp|g)u%u{k*up(uWWm$tqOUP?{du+mI04gLcqE2<~NZjd{u@;W_s}=EpzH307=jgh|#Dt zm47%^*Be9*J9=r*J%~xF&!);zy|Rm#`1m30iU28^jDe2fs!69o<|L(|OK9Uim# zCDE4%{Bh_@J=lB}&8dd&5-?prZRM1M|HF+N*Q&(=!^Sw2Mk}}9iy&Nge`^*Ew_ zP%jYkMbDT|ay#tgbDsf9hh??HSptb#g>lM@eCX>{bPNmPw!mZXN8Z)(aX*yh$-xR1 zgx%J^EK)f<4QLgxGMI{nRYP_wRc-Xx{P=PLs+&i3W$vPobew9zX##NG09x?uL<jX3((Q$C_FrwCTv^Q%X6++>%bFVK7gHq5-y8)Pf2v^OVX{Uq{UUsGLJfU z3(dmt+ySLo)Vdl+vs_2Z(#Wy~=C`!L5yNvxSy|4sAxAYu(G{JR4QQc*beW5Rg0VYf z1nnJbW@cYB&Clp0ADRZ?I~O5=iusXN84oF4io!B`6>$= zD~EL<;&MhricX*nvWJD#Od>QnYpg$hhJ=oQHv_9aLETr4ug@lmC9!(X}P4tKKrpeJ$wL3HD zzx92z*p?p36r4qs3_Re?T1{&`jetPp-wP>PO#^{bx+YeqM)_U{5#tzl-nKSRUhFu1DifllkyzFhtC1K9Qm z{qoJ;|3ts^6a^ysg|n67`sEWE%h50I!>--vmkqQUlKNC%;A7KHgC+ss}$9$$%8Wa&dFuSNoA)pT)V<5j!L!NhCl4?SYI;sg> zRNLaNeakH;W^EQP5S8HQCnTg^&Unh9UJBSeM&;1y(`5Z?-hk2e{F9|pQOoq$0kff5 zyA8wF(LH6+lKZJW27@vXJXbqBdY~`?<$6sZZ=&{o2IDGkp<^z})(V%OH#j8 zoZ;s=KG9!UF>#@i6kGhf9(6vXoIexw<#14!Z(W$JFI5|7WER%$+)j_N6UH7I%HljL zyWdoZ0~)E4sx8ic<*3G@6Zt8@{U0=*ek+Tfv5eQTFnF2!jAxkOEV`TYf#c&M0Z#fB z860xr_y$VQrd2cAf@bL-Ih}_I3lzM2ljE6RS%B3OfUAWGae{o zAA;YtMRp{)>Nx{!qr`?^q!SpOrLTXAqzGael+x2t`kfs~A!G50$dGA>6VvT^3_WsZ z4`n{&jaMtp^O5CX z{cuKC^gSapL3)*Nt3!Gv(;fO=<`8Yk`Qj_x<%^uB>0y~e-|cAe^L>$fQiv3KPo;;G zIw~Pm^zW=YSbk~20q|P z&`1qpKxl*pxHnx}e3cH_Kl60~t#o$LIU<{W;ENPBc9MgV=8IG|CIn$TBHgU>HoDoG zpQJ=i>ZsJ{sMM2GsTT8{YprbbbW?2xG^1EEUTqJlHZ!%_UqKTNKRhBFsByJj4z5XT zaU{N*yRLY1XM8sczMDJY`%P7`mj9|^_yb*VoUXaDDlM5$o;kBqTUTxd>l8)cAh}tv zR$LX25Ue+6a$v_w7XGYED1%;|l|i|yvD~#;se}!RWke;^z`Ajja1VXap%T6ae>*B+ zd|HZ1h;xizl*Z>!31;00H``GEnO<->;^_5)T4?e)?Vkj{gpkEz|Foxf&oATYv$*|( zNO5Q=fJhO}nCkG07OSOrbfPBi^hHV>eo4qxN%KXfDt<|jxiC;y{PI4H?o_%>SVt4? ztFTVI(j>K!RO{3@zZ_AmP)0Ghmm*k4O65HyI&+M^@8Prj z1v9Q+E`t&R)(UisRxFO58i~6)p84OR6Xm@0lbG3SWG-vapf>4L$=ptsRY)#JvylI!+1 zdZhBF=qso4M}>nm2mR}ATv5K<-K0Q?5}H-0y*EHZVoOU-NRVR^1W)YxuLzu4K` z;e_1+fV99hsV%TsT43;RXlSOcRki;kjO{Sh+=HqOP(rCaFt|#C0Bkh%W?Dg}coXvq zP8V$M)C!w3IZY>v6Yvwd=OcE-2VGl&2}h*dwXxjQpmfj6ikC9k+G{L6->hS&yxp%2 z)?xl2k9p2h_R>7jlE31VG{ak1Rf{p--e^TULowg)Sm-fm4IRc{L6M1PDc039YOEUf z-id@z^tM3lPmG|c#P#TbZHC2W*16iH#BWD)G2L<<=fs(+)LuzI?>)#70!$331kjp# z%bVk-q)bPq+&|KppH^xAo88K*l@ESloTs)SF4*J^TP4OXp`^UNw8q;9(v{bE4P!#9 znWY$bB|=c8Uk&#)bnNk1139%av0q96Y8>iM{bU_`;b0_@LDU|;fJqV@+9*iX{6 z7lFO1ecWYY_oqm|9hJN`X4)6I#1(gj7+aG`0r*sjHhA%DnS}xt zCUbtmEY2Kf7AI2*61I}*J>@rb%r>!Fq)<)S$S^>XW!JI3DP_LK@rOF|7boaypXe7f zdN=%4^T}uO7vqp|{`wB&;PBTNL{u02MNfJoTNxGhs!`zr#FuEZ+acQ1;zY}CgLw>j zC&u7?S%>KGc_O?OzyISO3Z4@9y-Sv3t{@K38ai78H1v764}c!)#PCS~9iqPR<6X7=TJ0CPW4(CS>eih}{=?!>s*~ zk@LeystgU%z?+h#T3O_b2N||bYNL;ZDH3h8@#A#GL$pzq%-mL9!RV7#l$6gfIiQPF z82np0w=8<=uhF{0e=aQQKI0eKrRxNdnuRd4wgLHF@UJjvs(_gKU^-*?9TO*8yX4Z} zeioPRPjG1t@OQ_h|DZt>m(s49OSjYh4wt?z4BG{l&i24C^)i!UX0@}CVFBDM{5n3F zUuD>edB55w_rNA^)8h7@jk&$r)ocJ*R>%z0~h;+PXIk~r;TT-}(Z?zHr0gJqnMAK)D z*C_mCS|Nd7ZvY3s9-o1qNa%NWJNSXX1t9g>ULk0uXI_HYe6o5^w3#4yVbbK&Ne+S| zBY6dm9#Rsh6NZk2)+ir|q1+ddgkg%ke`Np3FmnRG!2k|^UxyHN|H+CVT|jdG^*~I- z`|luKp45LW@NVb+Q#kz7{wue3$s`-N7bo|k-T=*lvOF$;c-cL&&Qs8SM5lhY6UtrN zbE-dO*fD|caHI?Po3p#r#L5H+3n9mHigU?_-)_PB;Hd+fDR z5?rt^i4q<@78;N~#~0H^BKlE@8ua6+UU?_dR(U^&@7)oMxC1Q^Ys=TCR$|iNHhRtz zGLBn}vOWux3sdp^-si-3BPA#3`8GNYd?zAgz;`@ir)zwDA9RB+TG+w&s~>fbub}6P z{N1em0L}Gxkz_xJ+vS=7y1=|NGO#dJ7k7>S=jd+^Gn^~)*4!fY5J#{)9Fq$IenSK% zv>dL>acCo~HJo7*-Z#Q{xQ=zYEV0WyS1yfX8kGgTug#F7LTcjJDH!liFuiOQ{QXaZ}9+r4gcJ#K5`K<^*4ace^5;Q&JP3B<1C*98><= z*H_I8GQrorM&DnPDx*8i7mU43kde-nJJRGvMAPChv{H$Nf8^pD*Kr zoGj}QV9ourD&hoPMAP#s)K`a|SfWD5=+KQCtPCC6_mWC$e@~(F$R-tP)uFYGD)g}q zO-|{rN4>HB+$WO7m95S-!~$>U`&$!<&UtYl zGL#Z2WV94w;qhj8xW>b8nOVFR_gAm1V9e+r?BMbV9=FZ~QS2>Ui?Xe$e>duYw z_92QAyP9LJ>{H%)SG}`eFZ!r}W-LBAzIy?aVkNQ}qq~o+?=mBXoUSxS`RIDYs*f2N zLp$ls=ZskOFe7Cg1GQXG1tLr20UMsYE-o}ylCJlibUmv?iS6s+-dwffbojLbS@uuy zEiQ8)E91RPL&o8G+`OP5!|#7c&5@!!3KV3y$Kp5kj~vJ51ZPKx2CP@)Vu35ZzBD~D zDxGuNrFDa8ZJ~E}bJ?&8`t3(A5ylVg*d2PSi7u0K6m8SR0mHob!dqu>Jntguz#z8~ zsE2(OkDX6?K+PT{#{+ZKdC--^x01knn!HP1ueF)CYTh`#Qqh7Pa1rykj!|TxV;+$& zbqvRxhN=&8>@ryaE+U1#K!dBJ zr~TIQg^399Zisk_2uCi{qLQB*(8tKn34{d%UdPMNX;l5eM5AdZPwt0r+Ng$`Jb`Cie;@}KfO%fx-z8*Vl1i#~k<-_$azb!^p(PO3VqIpa-Pct$xNQd7L~h;(h~ zi>ZTEtph@_jOgPG8{r9xKjR`r{J<{JNbw)RV~SO_+Ur!cELg<$0=%$maivDG|{@R_WbbfgsL$X-I6 z-&N;#g+=59E0j|4+slVY&s%$+! z(!`+oGlQfEmZ=QYMICIeC#y=3awI{XLF-`ipGbgB!xDzUY;?AWvjzy3o6ROa+E<5v zEd>!TvIdr({0WCVi>ztoc>pTbvSy`-kJSWQI)p~=i}JXxj~svFr)iTGA!J)C!IzN% zyWZz*YaKr=FUniSiShxGW;KaTYeY)CPpy(`*QSZa);3~V4)QX5_sMb*;DKGFz5^_; zB1?dK#&K}nTRba7)U@zflaw@>dt4`QN#~4FO4Phe{EUk)p=EbVFGLrqE{M164R5JN z->8$WN^bNrl2l8|chZvbl$N|Po*-XIf;=VRViEu^EMaNlJv<2~nz%uSe=P+O|1UK0 zdnbL)CSEKb98DA3lJUqUzAQi9#v<9eXk#VWbQ>p0HV>i$6Y6xOvc)#~7~&P1YJ}+B zCE#DM+8!Hlb4Gr?sN2|E`Tpn0l9taucE&agrGOl!t~6)B+B|U{$NUCj2lH{Oa*xCO zk~NIaZPNmTvA{oxEO8h8l-FOqp@tuFuMAilWLTmb33&pZ`8`;b;(d<`Sg-yQL3u)F zL8&4fK`F8^=wh-a7Ibl~c}xu#UJN63*j;iQcS?(VL>#x{iN&D+?(vYlq$1#b+v&hZ07>i5YCBG2- zuA&X3Y~0MCrQW!x!;!JK4q|v={wXr_Db6|Bi|)i=V>Y6{FOrun^FxeR43~6VUhTh+ z%SL7B5%qWkPMf=ZMSHDN6GzNDHF=A_n{R}#lg5Z<{NgX*gJ(6&x3O|ybITjTe8UfZ zAdjK*c`RL^@b3Kt@6AgkdFCoH+>;#MF2`?<&c6SOQ~SSY-~a4L`(CW+B>VmwkY0*? zf5KaF`@Xl>iH?2m+N$0=+4m<(6GPQI=-1C{-fITf5R5_-pR;Ut5hI6uLAFL82NRh+?*c%MH>3A{AUdP+5Kn-JL58>42FJi zvpo9wl)XRn0_4q68Tx?Q$0TevtRHeNk{1y zEFf!_e!)*j5To_W^9x4id`_dauY7PcMr*UtrP2BY_yrgJO*Oh$@-+HYJQB{>StNDo z7X;%8@>Q~5a5f2Fu3xaN&*yC7KgkD2)5KxP_=Wie13UW#$LWX^zaZCEO0yf+U==o2 zifiEL(=PmjpS_as59W%j(f&cG;WPb%xVRDj;3^EYqxBEEkvb=IEm(0CI%ZRq>yYpp z&Q1}kM&}l56RG3)4cTF7sjgjz`J2RE8UFBV%5|8#QMnHHD-WVywODxnmcO9Z=pLoN zAbuFr^X%MZgsQ`92w3aUL~?XcQNUtfvUBjNI1!VcGemym0>1uw!E%O64hCrb=6*3_paH+`z z;QH^KALvQ%*co{UA1JUNf(N&ukMbUdX1;usZi8Ez<^Sdf{%?NZX#Ishu1hhd^RDi4 zen9ViWKrfxGKX+Q%KU)36q*jUP#hWLU$?X=&6ALm9_Me#_*z!`hC?)v^-J*nl z@CBmu|9^hq*|o|f?aB|BPtsBP0ly_{mwv!p624qN;3CiGG*VBL501u2-R6vyn28%^~9^wmZr@(J?;6l_Dk9e z*&~jKI*{o^pGh-j+Of0pE+#{`AW2BXRf@#&o<4&Gg zmphHpr1OCP;`$z0ezgMGdSIBhZ~RG$@V_rxMepsZ?Pz~WF&*${E%UKfa$ z%xYg#z@oXBxoiN97O-9hzCZ=r=}OM=yQ>!Z?aP<6_qz)_yReqVsUZ*h_+AM5mRM_J z2M4$s3L9dr?ojIh{L+9iW?j1{Dv*T^imw%L;4NDmu#R zk>h0vR1cpOGYi&mye}bdk1XG$jrVc&hRH+<5#xIFHz#eKGdoRgA@RCi;qsJYyw=zk zpYlz5C7#VUsa7(`9%^5~MxV9TSFl1IPVRm250ZCb!DcJ?;xlsA13+d~)zC+>J}_my zbhI+#DR0!9vBVn|c=_UPTYmSC$wK=n0)>htW_`>a`THoL`03g^N`!;ddY;KoDa5|YKJx-Y*rs^^+v|ca;Y!Uy#;l#Hn-QcerB7>o*mw&7Iqqe zJuM#DM>ir;IV+tl{P(+k1$${!x9Qqz&O8_|dy}a)nNoIxDtnVRGIkcHW7K-2KaKD^ z%&kLY=6KoZQ>_R=KN9pd_A+J@t=9rv8e@GLwB8F^ZOq*_XY*lrYgJF70rfda!ZIZL zLv{IN@rPD;;;B2|U}t|ye@OYzN(cQd4)&1q9=)0AW&t;81be6!$aD$qSZllmkk8_= zJ)}RzWrC~hcgyX;3e8M!!7HY<#aFO}TMxXht=#5x443q{y%wGAo3x@im&G!ZHvexH z3o<#+CO1=2Qcp=<<}G+Bw!>|W%cz~SM)H|U{+F2|>Nh8?l@B1=SZhx!n6XN2S_vH( zVT3P}DbxB|7M?f=X|$rjaC5XW+-U7D*x=g3+iIvSe86W1hh+Nf+@5UR^Gt+VM`oGU zULoK~TcpNG+oT@ON<6vgOaZJV$6L()NWDkW>w0sdRXH+;CNN_=<@4ak{*yMych8^4 z_UVH44xFw%v7I>+NzI2*jqn}7#?G)K+uMO#_WQw~WjV$RW6Sz`ZBH*aF<6$x@7OZ# zo6qazwYGW-R{C6xG*fuBH7?v-(BLa*FhRr`8*Ws65)2=pwyMR#@FUXTswL5}8Ox$m zGgf(Rui+Lxt2M1nzJj%;t6`L#>x#Yao@nLPv9h(Gb)=o!SB1yc<@;#wShE}SymceI z1r4#CS^BI2Qmy8Fw^c3(lGRPy56-hwsM@Z!7v(5`AN+B{W%N;HmU1LWZW+QZjuyDqBXU&KUCYWlbTAUU#kAld4C@C zU$~}llaiM~JDVjEp5p`7S`}tRT3*g5In=~ku+>TDd2!x_q?8190NeCTzdnqq7jX&q7ZyVU)Po#aaWl)R=idqOJSqfA=%~7HCF_8gre4=CR1JS8=qg+l@uo2?7o4v%X z)`fE?7BXw4&*DVG0|R`nmA=B2(5rWJe~^OD8e9iQ+9kbA>mVY0fYl}5e(RNhwa;(8+59)exM|e~t^E?JC*&}!KoV-#y+AjIJKRRv6XnP=~ zaSC3|6dF37C_x$I=%1-`;h>7`{?SM#~g^&amxUOmBA{OPny)hpZ0p1t+ze7bm-&-D%m z=k%Ru&OF?ni6=Ow#b@m@_ivl%3-2QsVBcZ1=xVIflF_<)&jh{F&R5CiPvahwV zrT4^<^`6n#H1(eGm~`zign{ho{w_Ggng@h-C!g{Z@9)s?U;k9B$%`F>2n%r$5lUY8 z?S(GB?cS{5CKEA7IZh|7YEym2ReVUhWASE8`9v)CjPsX^{hRU1eibUxp+N^!=y)Bv zzg30ub*T8D3Z0}wV)IZ+t`7YXwM?jw4jH{vC`*SL^mpkxRB=d^@+mexwP)ziJ{|h0 z4vGCwT2E{a%6wmkF4m#9bx6(wBkfHcnoR!_YSf`UVLr#(>AYXPHK)^lb-2k`Tzbe@ z+{YE;#pS|o8U3kxPgn1U)w^50x7l77m$SGF*Z8f2e*1;A9&&gFnoO%{L=nm>#x;Uj z*fBl}mDq$Gy4q`bjD&pKLM`pew)JD++p{t$gB1;Mk2pb_AC@`A`28JRX?H=uwT5z! zFL$jiHnPapF(<{;=})>QHB!Za^hvdn z!J3svG*yq$b#=s_K|Jj{%J!Pc*-MC~&`&Azuw7!R3QT+IdFfo$CILZiw7gv*m7i)X zzD`=|?zRz;rFZZtSx2Y4>g8Uy$kHi9@R-13r0u;6N|2VAbtmD-tn1b9CHw-}b?IJL zqe{F>Mc<%)FIB%I_~r9!$g)vosZi11R=*~{wB%)phMjepiXW-tJ6d?wC}QIMHr3^7 z*ag_72rcmB=L+fn>rkdZ0y-|h{w^Qz@bVaGPaVP+geK}p9}iGHRY%^WBTIG8lXYYn zp;7kKivZhcj!K<=DKYBeyU5ZTiJ_Q_5-nCm1htIiVFyhzV$P;VX5URXGW&9V>B&26 zuUiq#tnW+otSk66ZO?TyffIivF(8Kp(MOYLdJ>6d3d%hMWjXErI**_oneFEjh$m6R zRjTNKiXGok^35vxYV~^&zkqWMshY%R-J{|sso(FY-;4Q8?Vfv8{P)!FH99q^lYXG$ zZ{asVnnE%65fMiy(RW=T0!DWWDxold)5M~>k^%b9kt zk8pNm_BfR*sp+Q@5t(%@zo|_>O~qfQvnMspbQM3I-_+)qtYeazU z;ke`ZzYalrosjO`he7K{e88icM+eGJ=*W3II#B+zj(l9_bWmPMXp~(71e(byDx@84|#xO56xmv>d2o+#_W#H3QO2?2XvXH`Q%|DBD3!2*XybS zuu>iUYZd)diH^*ARzDW&$0GfBMn8U|AHU_HhM~G1AJFz>c#}3M16F(G1!CsU!_+=T zPLPUWnCDdODG%?fJhgC5$N7`!kla2U8Fsg%yJ|TYqUCgQ8a3}@YDh8N=LgLk%u{hF z#QLH|H~O(ZWAA49U6`SJ*$SKEckR`2`NRdRA|qf`8d}H9Y!z#!YK=dKa;976n~?)0yFESM%9qj0t7f-PkVQm4sy{!zu(!IIaZz1exx%x z=-Lpl^!ObcgR|WnkXp+9u4R$zOibf|i~w?(eLa?8oj=r;Q?)k9J5copEjD)S>xkVs zNbEYsiN4+eBYBcC3bxAET>Xw^@N!VM)#AeQ0{HqKU=&P zflKm~91p#s4E8BDx)JT_R**w z9bvKhMr9HnIlH9Ch{$=`KIVj?gIW4~t(I>s75v1h{U%Vid`)`AP;ug5{{(JrF_PM0 zkgzma7>-?;CH;WQTbCm-|Mg^@rF!k(r{}ECre{e`qGwjJec|*R>4KgmE~y`{rCR7Y z5~t@kAp&~QsFBh7RC=CS|A4fNh~U#A$@E;*!|z&eEFK1PkKl||Gcu#qSbU$WBY2Qt zdPfkG;XZdq5a;DSPe%~@;=YWIAePmAlpimdL$L14RKX%DI#&yInd5pA`K+M0e`x%Ce8` zv~rTY(Ov!Drv3{#AW_#Jus(6>m+2PF1HWq<)Wuym0C6%v_|+*NVtNEzs{-vW1~}{R z)zq3-s!lr+p#MStI)}+Q^RLNMvH~AtDlbwp^S2lLUTg>U7iByoq+s`cI1y1H63y;C zFcGmrxX148PDGeu6WG0vO+=(2GKu&~B4SKW6_KBacuWR_?B1D)h(|d*f`}f8h!Q!+ z&hCBqcX7ZD^;Qx8&=E=GR09ef_C&nDnNKxrxs9GVRk|BPmPu5OXNqxsXCU@=deA-S z#5-6DVZE%$EKpH2kO|dugRXtdr!uFS@l|SS=jfctzJ>ghGqp8&<3wZ1c7vmSxR;=n z|0zvwV*BN*4Xp1IF+=6$gqOAyS&zyC5noT%nCTGx`}Z!zk-bizdAyIVMzXr%=1;OE{;q^_Csfbe5uMke2P zY9iA(EXO4g?KR%61I#@VdQ%``ipQAzp1f`6r)`J8@iqgm#`U}9hXat>+9n!zz9&() zd`dfmB}XwCt^EJ(Js_dox4uQSH|3CH>*kM*J66u0XxvdtL)}rkiG&_x*s#~QW6c_( z*EGu8Jw%VrndmpB)9n=id)pcbFv~Q$hds#m}jg z1NohJ-bCZpRq{e#-nvd+zQN0@@{-RBC(2D8^xP&{Yb1w6y~Ei_lR1{^@NS;NpO$zU zaRoo`)YCHRusdn*ch=FQs^t%J_?#SMcUU!iokWAR%H2#XWwvf62Xl~zU!)mZ_Ym<0 z5zxY<^+X6gPU2r`{~m|%T`y~$`N=bn=ZliagJmawB zpS(uH#G7P#=XELpu6N!g^Wp7e+5xIUySEA|hclYlx$4w?Sn7u64$~6vFxoC3l0^z^ zb)cXOP-^9LtSQ^wAlMq?Tj5|0$s{0A{5)j`+&Y=6CN=S-CBX+=;O^@ii4e%Y2Tp?V zZRjWfGH!T_$QvY;_PA}GbVztjWj}i7rXl=Hh6|^EU%K?d7B=17e$x{TzNS z1ejd{wZGeq}mxJCV1@7nF_!Q+*}f za|3ZgdUw>0CXs~0WRRY%d)rOml>X{-Ihye>-8|(T53To2Dt7>^t0kB8`{coG8x)ju zN88|ZUFkdEeanXvjVc=KFm&+Rx3l;Z@|&_l%J~k-pJcqNzH7_)NImatl5c8B9jQ)Y z6^WhPAFQ|d66eF|9^V0e%E3YoT{|qjeC=+2zDw&1p&zCtZQG5OXWqOdA^4B@vVQ)?Y7`08xR;+6CEi3d+$@K9ej=ypwKPkSB35p$l{oon zi$TD<=|Kj0gb_cXquV~>e^IGqOs`k$rSI6W$YO(jYgN$AlbH!?tLDKz(rrZ?RlBe6=Lw+11zjnLaB zd1*KrdP7u{!kN=Y=ObGoe3X_kVKos~O04LK8=!8fnX_|^Mr2GQ`Vb~FKH8zw4X;{j zg$quBLpF*{g@V)aC86J>jv)@5rBd0IIfOu5X|GaI&0~OE;ejBUK7e;H5S1q8&dtbw zkzbRW^hu8sz)-Ne8SKQ^5zR3{q=n=MTdXN#GQ58nIV!e>Xia4{QBErz)#`jdNxpwK z$;hCr>nY><-Na)7E0c+`ZsVI9w)2l{nfw}I%2cY1ykdIX`VU>sVc?6)@K(xhb;>y` z^&-Aok?E5$ro=iC>975mwIr;Cl#k_KX)G|9i~)U{I?J>kVJD6ZXOkY_M=a`34$>8^ zPPG&_)#Zmnx$@}dzX z^E&)HwZ2NouEjIYYe7Aed-4D6oPb`wXFfLshHuGIR6zP@JGalrrZGKl_GmlLkhg(R zI%S)p7ef&BHM{ygNbK9ujgh5q{FWkgIr!*Bof8^kpq zx`ojh>*ovg2P{-qe~cUK<;8D>o{|K8qoSFqJ9u%&*lwObDksU^H|OG~6;0^iUJf+G+fs{Cpk zsT1Q!-A&D0=g^bUObxm;P4q80f{V4qKXZk=h3ay3>dwqkSF-(@e4jvn86}ElynG$w zH>|y3&#*t5>8}r;$C4g_l-D87Yt)}*+5ccsP}E-(W;M<7THdR&>%+}FC2z~Ip;nji zP>f3fLa_|XmUzy|m2CcKfcZRowY*kbn(en9&Z1Nu`3+e;RDmV+n%`LPv9W+#KGu@= zfaEP+AN3Eh?17Sb#CcZOBYEq?BX~%SM)>bCsKrGEWKJ_`KGY$phR`+%MZ*#bM(-HH zFuzgrl8%!)dK~{XBFG4OJ?${EzL{# zy4=+kaJ>;|Usv^BXt`8ZG2?puQaaOvRdWH9Q@@~O)j5DzE1IpDikMg+UAHq+;UZY}a9YkERnvrYcMjiG4$y6oR&|W| zf-uC+%lI{4kcE6Z{k)3UHwt|6zmWgO`JcyswNap!NAr+V*Lhr`A0zZ*h<@bjha3(< z78#e}u^U0bqe(yXUbT259^-UTxOT=_zQTQlwbjcqBu5&T;V@^^>SO9omeZ+O=N%@K zr!#IWT(eWAkIC+|K{EdZD%Shmwr;71rKJ+)q}Fd-|5{h0j>>k)BzybXst+M?MJ2BF ztPHHV8=zaBJF>NH>2_GklCS%2!YCiK7I#zhfJ)@^Nv#l1mrgK@&23MSh{t(tQ zq|n)8)STl{q$EA0)=NTGBUlg1NW9+;`{h_htG;kw^RJaW3M(G6{ag(pdOJf?DVy@W z*pUx6QO3u{H^Wl>$Hvu6ySfl^;N3g`6xq!y`h=IZ`fRlC+0XU6((%352!-4%Iw zD;Z)3+?;ns?HdXB3P0TGWBgf~)LwoGh&Fp~18#e{K-7F5?>o;Vo&7N8zIvBY(}#c= z`qX2Do&_HVEF-ce5lA=etpt45N8V!=32S*HyR&mN>EAfjO(+t+P!abcsZQ3>Mi&V} z&AS=-}t9k~bi=>xZ3Y@MYEWPN3`Jzr=d96Lf zN>i6xyW2N9U{)16I0~OeA6A_H8zqm8nnRFYX!$*qlg7m{5a8~ee*gkLm;f-(yF@*# z9YM=z!NOf2L_1W-wIKxR!;({=1}@<^7*Dv^DWZAYPq~!_k%C00-Q

6b7`8(s7i z?-S>RmP?Uo(+3u=30k`+vL56-=CWCtzyW(!$y{NE_E@nknP%(=xZdHu0;p*i= zB?#!V)x5;=5mHHXkx)zX0lJ7qp0^85WQA}AXVygUrt%?_UhS`h(nWE+pZvMB$Rb_L z!+yyhT9FA+bI+@$xUUMy+p41GE2ts0A6mG3Ms-5-ccdgI- zI&_{u9aS2ud92R2n%4J6tE&M)R@t5swTF<&mBmM*QOT`zwROKA8;X!HNOOO_6;QaY zM%934R~)MxLbBA*+*&OlWX!oj8xS0cUR8=&GINz!7D>~6PT|)5VyRJ-0?)c%EG9lL zPx?Gljl8!kYyOcGZ4ZBLo;-&3p<$Pvq`0Yf+XHNPyj~~&k51kNm`hLA$v-8kd8AIh zPbY7boSQAgT~mFGD|>-3W_9sM&`iV@7DWAl$I6hrmp4!V=zZ)G;_{75Y+-`2eNdUn`@ zUfdE+osUem7w?hzzG%jyW0UR0&^?z>$MSpFQfh=ZQA}t?zRP%EwYl{dZOk{(7b7j`?=3 zh0+Pzn)l3=rVMXX`NH#fh$ynQp}y~qs!ro={tx4Cf0j3$J+wp`)ngj->!oWO8`WBe zdcQp`ExkTmNlEfoSR1f#JH;MTGM>ld$Tc4G^rKoo?$D13`f-VVC_!sy4Bz5PyQrdQ ziQm0wwZIu&zEHvWcHySyWVYLp*sNZ|qk4Rf%*3h&Oso%#K4eQ#%%=DB7H{_&W42o? zq?6T&`Bm6spSosvpvYd6YTF>cpPBnVjoJc#F}Hw^*>8+lZK+_Oy*^lci2G{f?w}QRne`ML);i<@o6M`z1;5{-pO2 z@prrTNQHUP(+=qb?PVE~Dr-iTD^bHuVbYA7*tgEwA?pCGb=_>Cpyc%_W;FZ$@S5qp zyv1)pJa3uSi({!!7_;7DZLX|a1Ad%kh<|I#F%I$XZ?#qqdsL`@I*z_0 zKVa&r+UC2dz*0%662M5I(|lI*DLO?An9mD^`3f;zKgB#x=nF?43;}xtLB4+E=tr7< z?A8*XNk2B~M=cLJ$Yu!z^5F4Qd9WmnF64?!wT$$+{&Xi!r}IUWwN{Q$2wJU$`#RA( z@PiUOo)Ij|?jaja)aIRn*u9>@HJlRADs;R=evmNSDcW8W7732w-$?66O!2-%+Pjp# z^17ZCQQuL^^K1l8YkmUBV}ZB$M-oLk@>+Xb|M7`wlZVD9!Q@$dS<&M{c}P4;e7f#L66n} zg#H2iD8a(D(X`T83(XF8ZcDA&;e2lU(Pb|PJx`q1ULR`jVc3re!RgAe9Eu>f9NF_` zKb*!xbDsV+#q(iR7CY}bc!59M1`ih-RlVx~S-jhLU?K6`-wqUlzy8o^MsIYEYA7Fb z_%q5YHjcLED+IV7ldI>rr(T6xj*Hu43U+nbZLPOBHvOAs^klDHbkhEmn@=~ES2UKo9(q*pDRs?xRM2Z* zE9TB_W3KEk<*GetdUd7uPZa!&^r&o369;WuKK5B{UUe8pjbNYVi+;@)e!Ft0*J@(G z$m?oqIAFS6qIk{dv9x}{3Rd*7Ws;=#y@l_a>~%F3tn#_ubv3d;OU7=cb3l-7kX3(X z98;CDyWxPVkwV(cP`k%?;7SCEmbjtiLe^>1CnnZYabG1d{^)~Z){U55G;2ilyT33N zPo0GzUbb8sfRj7S+NKP%x@m%$wVOjcW{sHr%yOX`Idp+xm)Z^v3KVGr!C0^sJMamI zBp^j&4hO>siRjwW_Kol|?!d|CX;CFdgB2fpwE`-yc(2@8@Q>%AC>c0tKL2VLJI)sz z3RG+e7Vj~_Ys7&SmwOT)Tbu1byJZWR$XMsxa^k#E#mzqZ+wErPV0xh9pfN{EGu7aO zH);#7vmHNBv6sFz_ir)nt6jm0m4S*)D!eIBv6eDK5curxwE65y>9L2UbCs~x>#pPU zMMg<6xl2r|se_W-mPZ#$%W~WN+;aPjo@KMo_>)=tVFm|cd>9D5;~v>w z^GEf8eMaBUNGt3vt!(zKb3g5>KuPd)l>ijQ-IX@RKI1E&k>=tYPN4rtpx+k=y(`c! z66np^UC_sSZr_l7q2&_cnc?f`I-*2s zGna~RH~%_=-1f{S0`B;+Ysr4}aaC>Dx ze?4RTII3l`uYd>cpezTJ`I!!XnEm(uiaI~DCRQEi)A$NEd9BOWd5hV{GJ3C7wS+6o zYZxv_i&o{x?d90GmJc;^`Nn9;gB(-vpeMlfAOY7w{|gWAY`EsfzkRYUU@SPOk0VU0 z#bEu)L1xs>2)I_LgN90GvY&5_)m(7B|6<_|0*BJG_89JQ#{ag->V2k~Srt8JP%ymytQF*}!*l>3ZW#C(OZ5g5S zp$T8{2D!{0t}`B5k+q_-H>uTRHbQx#^{gEZnzS5;v-)a-?s>B3t9^ZW#j)ODmoG8w zp5%*`uOl(vVra|v4X-7ab|4mjw7aujobdCL`#_@asU9OTE zf5zx^qQ5%R*F8b2e4*F!&9}<`z+OMAYK}GS@fWhdxcNc83s`k(TFYdxE$W+NEbu*U z`JM_*`$O7{p7lOO0xc)_?P;r{RexyCXUIbo*&s4oz8ZhUw5Ohj$J3h2zAYtTujYuR ztIC9+R+A8#_Eg#oMrAaoJN#bn`62C#Hzczv40%+27>t%LH0w>(DxqofPnuDpQ6Et+ z6FBXZ;;LL4EeE*r$NlYVSmWa97!T2TB#xx2JuMGLee>-R@5ByxQ1j*Ut+fpY_iw=* zvMzrl)Oz;R%q5X_Bdw)hsP#nS7qU**)|babeUHD=6q@#UnlblcARjKdo|7MA^lGd8 zAqr)}B2=42L#oCxqP|C1!LW0HE7s6zl|SON-Tp?)Hz(?Q%J#Qebe_mF}OHQ=>5gu8BMD{>0h58B(m@^Lu zr7w{myqH?-4X@P}z5H>%wb>gjf2jFUhE%=L??V5dV#184;Ci2o81q;nkMfFLBcq<* zkBkO??@`x{x?=t%aoNH2>1w?ZL1c&jE3yRV3^VHK6Nq9V=A@0ZJiqfMLTQoO1X>T0cj|5vQ_vvGo*8;AS;d*nAF8t5HNXYT}-xL0=3J z=A?%E?^OoHcpgiCCVgP{p2T}|(@o0Wn5mP0B+1it@?(-5)5$mJnF|^()(#^AD4Qq`skyQ!e-3> zMfrud&S2rlJSS^Qp5OMZCeQz4?rq?sDzC)+H!kz6iU(k-sE)t24rue7UcY84TAnE^@yS`06XC{@7M ziDMP8g#gO@zvsDkCKJTnZu{TQulam3_ul9Ib2h0<$PEukis(93 zr1rDePx%_N58A}SW@2m^Ut#l4Jug!k$k|yRIEn9=*u3CPZsyK#Gd4~|s0tcfRNtLh zk?+Wggy4ycg+gl!3w)n&;QLnIw*=w>CH6deT5vn&*&JDnx3EDQgvwF zKJDqaC`xT9LdxZ@dPF*^E&V(wp-N4M7JG@(qwCc0xp2MvQh~*6lL}`FqbuWfM7!|0 zBifBa$N#HL(u^*yxQ=Af)MU-(RDa%p*;;v5N^?>RAxsONA-9Q3wGV}}Rpj)GPTnt`0&ZZT884o>4!nkN;?ScN`<{H|-~xByP~@=62nDQ8)i&V2hui zfcX(5_q)Nmk2+&-?t^P6u&ww|Uq&^$6ZAqF*@iH-fOC?H{A~XbN{EP#$E~(9aN>WI^~mml0E4G77gnm>8D};$hpk; zR5_gH2H}8`ufeer9xqop$}yMagl|*fO4&mNh_2Nt2{T1;E?$|Jw}C8DOF1hp`BPzh zm2ij#N_&$7zaa$2A;4Y+KL_k{^#?QfxQn8gpP3ZpH)A0l2IQtWz1=)y#>DZg3HjNI z={QH5Mzo?7O)heP4wO8Y5)ktWMUxxs0Zyc~P7)@UN&<7!hP+GZ?>+yh*a3$(i0~0z z*p3!TY`)YP+eayF4TI&Xd!bBoac7{Nrseg-ktp{o^ea-R6>c-k7MCGt*acdU3Yn4F z+A60+d#H!Yyu}uDu+&2QD?Ri?L^oCWmYNGl zav@zKt=9cgx)p8@3E^wmGDFD+pd50?$b?}+l&FRv-uPupO&q*dD=Q$2j-36c)AQrG z|I&zFEBs7X!j#UA^8wkP7SjZFl1RBRdFA;bN?I?|JMvpt1vvRupc*Z zNw+`4V}D!vq$+UPp4jbDo;%WKBQ)W&kN>gd)9IC^fDt|@HkL43FEL}csh3_;Y3{kh zAgocWfrtzkP4z;(b6y}oCpR@w{vKfk+DQjs3(kzXc+!C$XE2c+kVdcQ^xL<3M2QTS zEbMCv9va7kc&^l$Boqj9Ks|u%R<^u!cd^!dQ2J_ zsCqM?O?fj=^|odUg%+^OuGEjg06Zq0RIyXv40t|NWVgTK0L(4YUsWr@n&npYV(a?F z5Tvg`aOcQs;J03MoGLr~)(O;+Mzb-t(YkX()*@Lx0kf>lZ&shn>7kzP6qtBS8W*q^ zTnR#0*xqv%+gncm=xvodu$yHmWSPwWP?+y@CKJ>ubEh~q%a%z7vIDU{>cW#|_)LF1 zP}LdGLLA2|Y_lTm*7R0q3>BOtEB?sjN8-^_aGavTX)WB$sSJR?fg}b&cbLa3c0`XC zHGMYPJFw|fi348v=n9U_;;i@cf6Q*Ts=6rMnfi2dcfo9hE_?WhDOu*NPyt&1&XNVh_20O z-6Dt?`bB}yn0QZAvIB1c+w1k)Mt<}}!Ga4#xN(P5zOE|JsR7g0*(xyVMjczJqZjd# zTgTQy*)QCRmTZyTM+l{$g4>Y-x18l(ykqY0Bic>e{2g8#W%O3~&Egib+ny#u)g_|z z>4>Qo43g&Gcctta>E9vvVo=N3sIv3g7&PiIp9xfr&4H>T#`^nR2_R6l$ADquPqA^B zR1&C)v{}{Xge)bb(aq{M(|b;4rBoYr0R*E+F-EqW##adscYezjwQbgIXC!^C+no;H z7!&lInw-r`ceW+oDUmeZJ@V?)R_#<{zen~~ZPkCeAB+zg-s)q!?5qq%dw3>wn23$VEUkk{2yB z8lGk7_Fces6~vOQI!64>4r>mg?onuXMC7fF9eQqWQjV1tN}-F)(gh-2~% z)Hiu%z2zQ%Ml*y=(!Q zlw9w;Xs^iiL~(Y4UHlaFaJm+0)pxz+Y;|{mERhFGS|tcX%noC#FrZT#H5KSEPH3e{ z<(VC?gvLl+Ip>w8!X$*t#B$z8Eyv(^)u#&*e)dH|)DAM{sK^1o30BQ+_|4Mo&cLJ2 zW2HP8kM>E{=+&%yP8)@VMZ&f+BVj{;D{?{AYY`2Cyrq#MWdk(*=36de4w%?5R(o>N zew%nJvNBNho)!}^nT$9WHLUQX6SjDJ^RZmp(3?NO4E1_5Yig`e?3ZMuQo3F2MP{TB z&d9|X?67*5$fP=4nbe^LFQG6YEvYzwiUne+Edb|z-=+D^@F1M}63Wo7aOxPgj}K({ zZP^ACGP}pR{vLOW{O^#NH5MCh=mR2>8oS8!o|TRx`d!t73@M8krUvUa3vR$VFZ=u! zXP;lKLaY~$E`j2~4WjV#UBPhd{ zC#iZ#C8L-fz|ZC+{#f1S*p`6ZP=#4wu1EJKAmmSU6CJx_RkF5NQ_vC@=CH$&?6={`y`9Dkamt+yxLmwn4nIKx2$!`EzBzwmxA@?J=}-7cx-o(?$aAoY?x<5a@cnS|W>`KB+762_;3o!&AjQ}0CJo_TQuebzz> zPCLBX_mayvTguq>?%y0py4A^u6Rl1N`nN)=`9jdDE=zt@j;B7cJ|+6RJqHAk^Q{*7 zUt~GUdxe}%1RhM@@}}B&f9*B_pj=_es_WXqD0k{CBva@1O4>sLz!Wtj#q4m(0wxJB z7o0DeL@3gc)3B#`#~f7&L`~I|-}$WxANs5EBLmZ0)GeKsQ%XL6IRY3pjj(B5`WA0I ze>Q^_&(HJ8!z+~ubscZnl6Oc*G0D`l3q<%SqfQo2mqM0;D_QVva&uv~b*Tt;80#(G zPLWl2N*5YB5%P1SJLag_>4=B6YKoL~+j0d2T(-T84w<**lX)Ah;nyi$u37YJ%pRvP zU`vKeP87_B1dU0!$*FIH4{<{B*{?FyFrR~@Sv_(|GKkKj9a+uIFeDY<4k3dz-%pkq zLU;`iG!xb3M19qb8stQ&{Y{eIK#3yplMN7(EYPgoyO;4|R8|MsdN@PX<-o@Za46z0 zE0%hbUmy=>c|*<&blQ^b6wn#y;Frgf^5}#2Qa@b z?!U^@<>cY$T6KH3>UMPDl02=|q$hfG0jp8FZ=t-~Q%ZDuZm;roRJnv3c~)_m-due= zKXOCBy8bu|zgzU4%#8r|9-I#76_AG`uhF9?i<&+y4AVId!{o2n%T|eX&yjhkj-}4_ zSG~HhSU9DD#Cy6@`}OF?`2iD^03+S0SJ8r|WzOQMLm1ItAHU_bJf_l>SjR4w4S_o& ztx#ujf2-EpSqq8I#MFwOqG&J(9o1Po3Mmnf(rWckh^Mo*T$WB}Eg&P05+`M~6IkN} z`klvU=K+vO%1S56Sm!bBHVK6DlBiuJ614Y79-g!Sjk5tCis4MO;Jc;x{ znkI=mYs;MKOTWNZ>T7+$P<_Of%K1a8nqbz6q(*Wj!H7TdQePyPr+mvJb$0)6y2h@M zH>*byjlsIp5=QVB{IB7E2mc58&&co8XhNTethW{;F>?E@OI!3SLbQtuU*&qQw&+1V zqD{U$t?i$AQ;J#_*N)T{wW{!<0rMKI+LClvw6|bhL$qnsZS($#I}x|dyFJ=eHgMiI zqD|$Vc{8I;qdoJ!Zq-&xx6Hwzo)EI=aD%!xOZp#~K0GDlq;asw_`lt@iY&#r#~qI6sK?9ArhQs7hi#Pt_tls z_7V!qM8{Xls^Dd%Iej;;#3ao_=a);T9! zmkwy_s|QZ7XI@r-W3K3?IY!++G86=G$)u{O+ZR|oYRIIvQN#3>jS>>5IDy7(VDZSo zliEgVs1gUUaIMA0%PbV&`Xn7*sl|r!l{3Q5`D)*JNrrI2p$S7)Gf@p$6(g73&jmyU zGBGmA7{zsU%OyuX7gk98`hi}?1czAt2JO%l?w}FZFtCu{1q1W@4cm5xH9KroyPCe! zZ`3*%)c>DGji#Mp*l4!yIi#ndXGHKxKfA?u7?^-(x>$>y0$g*3kM-XVf5f(G_u&^C zjwP_x0nNBQw#I)){3C>H=%(xp$-%}}d@e#uqr!n{@aZefjmKVgLb{DQOoUHgfeI|T zue^2H-WW5RmjQ0DOyR#@E|YTh!xO|rYYhua@P~riE(R39wc8am$X5G7xNaZNHvh`} zJTSnhPaD>(Zl0g@+rO1Gh!L)VkqT6Nh}BRMlzH*7Rp%c+Ypu5Q1dBFg&00yBqdp5k zzMPjb7l#BYUcqlnxDKH)c>-0>YfGOax!$tLfx}HyEA}%S_epYv`00b)b2kWqU zJNBHKwkvy<(2jt3XxdwA&#a-8lhm*YG$7OW%r&YNqdr}0`)jhbv(RXo7wT(Ey?2Ky<+oqy&zq{f43Qie3X;cpoyiHzVitv*xe$~f$&D4 zvxd3JQz(Sqb4c2qd=zRCzQ_*Fm2;~+Lx26|a{+S;N;GIl$%bx@DntCE^cg~R z$&jb7TSYXCZb>D35YLj3PBXII*^cL=c#;&SRer|)BDw3UAG5oZDkv)3vz#LT(Wx|O zFFa%P1gFNLej}{#8O+cCgw+G#pLqHv74cEa&v1G3P4dYnKf~qCH>pHE`57*6zDcF> z$_Zglt2VSX(Lw>;9_1Zf)r?hCF0VFV#)lm_7ay>nBtf*&X(L5cKSlvzk3d z-OC}*2ZraQQHL3o?XdtIsg-lPQn-|)%%h4S;=A}g{xWbO}| zuL}NEI83sk4X5U zd|p>dinOGVye~-57v^o-M6@Wj~IMu!Z~bD}ZVrQKJ1+OD3n-ekSdOXkuywFpg? z9h^q&UoRm~dsic}I_H^HmAMtCqY~p7I z@`!SRZ`?*n<%<)E~R7)20B>8?T^@7imUUJ?~zUbOtSfIDB?#fd6vIU z$Qx9!nSgIeFEHU$E-jO8G9oh$5OEhxxUq+S)U;+wzm4y>8{XwUyVcXt;@%*LTwg1{sUbP-&B*JKgG~vR>okqMKCUj5lRv9bgH()o*2qE?c0B3NtI~_ouC_&8Z@a zE*wQEz|V{`!H*H$fOrV@tQFLlx45w6%Z{sS5ykbn?E5^S&`6)YNC?p^KjpWZh416q zonJE&;$d3vPV%Tkv0YT+)07c;8F8vT^x(z$qW{?L1x8vK@wA)}lIRIsWakv3+zsy9QdoQ;?glwK%I+7~Uy!jf zI=u;1oVt8n6G>*ym$LD#2~nWTP4fn6;Q!tH#0w?EpY&IJ4SXzKVd~7U2QVl!mU-|`qDX`6coA2OZ9C*OwR=El*cuR*IW-N#0NOB8}Una6p?_d+fLC(RMF8B*F^T49X_Tmw7RSoXx_|t&-Ls%mNJhf)=ptf!CcM3W8H=?hh1v!1CQNL3zbXiaO zdTFm2Sz)#MWaPLPVSBGYx~2VG_~oA~7!ki4qegp(~F}K-=I8kWa{--<9@P;mRg-!fD%_(vWp) zIUXR^G*fEw+^@)?n&?=r<`YV3N>YzD`aF@#b5F>nmQ2mP{p<0YJpoKs zoxNuSI1Ei)xaigDa=za@t~T7m>9aQym(!9=7VE#r@_>qyA?%O|4;4gKhUyk}ADPG` zo{~uf6x0NkC$C4dK_*ZlhkH*I%u+MsFNkodB(m8*KC(i)PmD-_qm3LKouxOvX4DNZ z>bnGJje;qqM%|0X9Xm%Go^93?FJg!`fwQWFw&Vou;BYb0jtQmJ6G$DhhZZ5;%)q-f znA`s8Q|Y;b)A)pLIhbxrH?<@@46ZqtbDWU%^&(x{P(0ahUFQwiH+k{lF3GhAHc?A# z1f`2_+C$m(BjU!PNbvO?@8~VBNomMg+7YHtn0s$ zQ|LtM`X1V4=`FFXQ|y^v@izQN$a5l7>7pmdIoo`$XAMtX-4&i4+b2%sxmY|=w8N9kbw5|NRuW6@Lw>UkC|q^D=!t{XTz1x3b5>YU1vq!zsYYkEG|ZCLiKCazPU7i zi@xJMz2z;{eEUJ<>I}!s#l_$dB&8G@S#8uINg4SS*1wtpiz%?LA3md}g@RGCb4F=i zA&pJp0sXntM??mg5%Jq!^~jxQo$>Tr-z{=mfjr{$X4JaP@S8UkNe*q%hXNgEY{lrR zNnXwVJn_+9t?4`~|0*@ZgVOOG$uCNuP}ihG`D$@+`%b@Q)}~KPg!P#}}|iAGFu1WgfJjqQSs%;X`DT3|&S6GIY~YDJ`o;We9W7_qNf}DOiGn zjg~DAEm`<2H&><_mAoZ7ja*W$esn;AqwVI2E+I@`JU|e1CaB#BiYL8g9<=T}(PdJb zl7rUFSBH4JDaX3Dk|VCEUcEqb^hvs{>*l1lMNbUS7Inxl*q5)BN8QMO!T(?SHGT0p z&94rd0>0Q-+yIgJIRS8&N9102xc;bYGZPjsyG-^Oa;55=0-8^F8U{X*mXNQ8 zt$EW3mG^+kpYIfyx-x7%T|-BM)&mBQu-$OZz+mD%M4+c!TIV^xBDGRO^~GQJNCDn0 z-Xb9obEP3+w#$Fu|J(fE$N!`J%lXh7{Ach7p5y|?jB zTJ_#M2K|r@Rjh28cC%Wcjy_Y5=p5zJ8%Vsm!gkH*5C;Wf;=-;SLbWS;4%2Q&z8dJ_ zMq#rqK9GBSc+Tz);F4$2>y!fwK;^C)1#J*my?E3(-ZAdKigT2mk%8(ic^xO=91I<-|BsjX}hAqSnapK!%X zq!~TMxLlG`#3YK?==UUbyVWZ?h^WJawJFb$sCbI**~(|*C;`;Ak>mWRVcx$NLpkI+^XyyqAij8!3^h0hw@ptf)f!r@9#iLg9TW@I^4ZilO~iA z(;x?Bs21{sNLkp-vzv2j$@3s5yxM(Y0Es-Jee0CDP84CCZ0lw?ujEuZ`zo^o7jZ{} z8X~Ic`cBG|gwBMPDj-nWvymIrcqAMOn$7ulT<2jXR6aD zbQ)VW3%us+w``p!CIYSY<=0<^>Wmz5!nqtJD49P7xlwjM&iHF$Q=3#`4YR)P4b>&W zcXWL&$PLuGbm)#3ht%S-5cHyVJwLSk=mSlY#c>=rQ*C}9bc@S$@ z_31Wh!}q2fvna_ovfwb8dN8b$-M<~OQQWoTtzFEEOyukcn@0NjiKGf^Q{Ms_#(s!420WW}&xZlepA=PwU0C9eqhb}V@011v>pzl~;ggM~ zgzrcX3E%NMIu)lk1JgJJKM<-rKGiP!0n9x$b2K)%P3-a>OI13%hHBZWOSIT^40O2u zk5X9B^JhT&%7Et(r&K^*baOtU(W-3${MeT@JwX`;;#nqm+3jIdyYqs4{NGI zxdwGV`|`R)4F9U)F~%KRKZjGu=m`&9rwG1>Xsi65A+V<6aMh_MgtZiGy8!A@}YI-%wJh*Q} ze3}|IJ6b&{FY+g}bYt=F<7PIp7X_H^#Ek zpfH@%d>;odb8+D0D;&U^Xb69*MKGwcVtl}wh?T*KVw|vsTPTo6=#49?!qBFo#AJ1_ zQ)Vk{rj>b%hxaj1Y5)BPGB-iqR`f%k?aeAHe84nj=7d_|H%#N!egR3-xUFBnyQXn_ z^zKr0%11F7Ryb)z-nF^VZ3PZ+y6{G=Jrcg-B=*)Lh5B#PsZaaOmlN+`%I9Uyza2#F z5p|W5dfO&{+fSQeg$0)v>QAV&J5}19l2#e-P-#!-Z5#bC{N`1PMJS zcARibdXVf`x-EJSDOmcuYT91(m%dn2+F8?##UAbc&Khl1+Pu3AXu7LjOzS*7>IPtW zr>xr>IK=_~AJUaEu5d*+f!^AHXD@*XmQO|}KsJ<-Qz1?=0kW|aPt`p;5QA@L0Z2Aa zH<4LQ`>_ zib``|g`jd@6;Z`I(8dkDn{xoJSyJ?;52EkRHvDTjl+iY+Ng_8&ZC)U3>{D(G;CtBdZqG1-QB9%sXL~b0ZOvi~i2%7n8#3M3Q%EB|Vyi~uwf{BmTzcvB z`J2&y{;nFM=8wfE^S4B)d#L%_e3qJ*E}6>F>NPWe?r*e{WQ`HnF6yffL% zIrDvuGvCvh?~xZ?YkMztJNQiBe1~)A`ztcvTxi{Rs%pE;H@D2CJHOyUX3k`5r%iUt zN6j=*=DU;mjxgWvHPasE+c89-=3C8Vu88*x^a}1o;ozK`@C}zo@2<{kyd-4T&7m_w z|H4rvOGdKAqV!kJbxD*B;`-;d0Cbh=IO2}#ravgn=^xP?g^OMOPaKYO-WRl%3_KuF z(FE40dkV}Y6K8@fB)GSK@U3pJkD19yeVZFx-aq(uf>|RtlI|^u{6ucD9C=4HDP6x2 zSud)xVN<99!7146`_D0Bx$GwZ$bjSYq*xl7gUJUym<^(F! z80O$F^+gUU+*bLkzE$0L0cDY*QXD`3rdY10=-RSQF*4uqpKiM3)`wU~Vs<`OBZFZ* zB!fY|ko}YxB$ceQ$H{UymVA}#79iO}G8blSFX^n9jE@<6kYB|wVWM2feH6gQT!|>e zmWc0z|JF$lldl|>ZaVKRd;4cMvRMt=7F+fBqQrEZWP59=G|Zl_N_HG(WD_U13O=!7 z%|tHFQ;d7;1sZ5QRKkc9JoG2R!3%^)DrLaiZgVgbw*~Ds2Qwi}u$#|}nbg9iai2NK z0Dl@gL#fa9$^R9;PARKBr(#>bf9M&R1`_9ySk|(0X<^JxbH9?qV+c5e6;0{W2$%_c zUXa|3NgHLNL+Zvtr zz}$BD&G(gvG*kVLRx<16Koh$5{Y=F_Ptj`(rNdzAv}X3}{c zzC^mU-?1Kg+ZB#=P?2NyJj@SMsA%Tw6gs4{8W4wcRs$lWGun>~J!%$_mHOI?W!~+F zO4WQkB=+_By4v{?d+%BD)Y)&I{UYhv9VH=sk`xZ&aMMk)9(_bQ;4gSob)+A1pT06= z_OhQd7o+;`=VI0ARL*=vI*>Rs@;FY&Oh`UL?g?hAD&1^Vh38C-7wpF1GA;OKO>aV5 zr9z9{C9oEKOxh|FA&qUuBt|g$;iX#aQX*YaijK%+u@?$O0j!SNJq!JtAp|DWX21d;tD87@#S3S!u|8q=QI~y&1y{ef5y! zootW#f?+z-VLc>eyCKpCnLq0x$vL|{U|r%b_%h2tItc|;2^x?z=xB~PZR~rBg~_p= zx|P}mwSt0v21tQ~W3y$xG0;lJ9DC<>yXyuhIp9@E*Kkb+HC-W~=^%H*o;L@Z3$py4 zad5~wwR}JLMHaAGvX6kSQv;BdzKaa0WwY!m{iO)+B0hjo9QFkm#RmXn7{wlfl50yP z{HotO(eHnr=;coIeu;j_iT)2Kx?7@u>_qR7=td`csT2JhiT;Tbyp|x{vzU8JvKj)u zep9oodeO&?HItGdF=H~FJOo&B>B$^?;DL5j+g0p@)W zKAhb^xi88#pfmaGmsDgkK#pbuEi*e?}US8M}VT~U%+>>CbNmvxp!Cai8*tzdt!y8HSeSbcz`?c0HC zoiUfWH45C>Q!`D!)VvqO4oRE?1<`c^U3m@X_myBhB|*u%D%EmreMErNUC4d4?D(=1 z%Yk5?b-#dQdYh@9$cUEymc`%G>&!ISbB6SjHwpyP>=S6|pT14V3h&z{WJogeo!K8G z1!z^G`t1)BthEY*7p(pG_7GruIFUNf-KsP21O5L;m;Uc+JOm97{qN8LJ_PHh?FgrB z0oePDJ|<0(8I!j3p?~4`vgrR2fv&LqXqkim?}ROSw9MH6?u0Me>}&wv%&=sz$1?2# znIZcTv8~GNOYwX;8-OZM@duXL|A}z$e;JPDT>L+}JY*^&0ahXx|4UoI_Fo47t8uo} zHXtEfA!h516Q515b2m>fxEer`v}^$5Cfmj1UCf_hp?mTb=3lp*Bw2qMk&-QoqG0WG z=ORU((-~!lJ$0uXA6Y7~QTMb$CW!V>_;sW@I14&KNk15DV)h#;z z&Y>V8{BVc1!E0c@1)UE3*y$~A~Hhw3;+#>M)l$~W1` zH(sLT@@c+PtrU5QTjK+6&O((_czl)9M|98KZrlLk2KSZvr;pSC{2wWGAW;MQqF!>M zMyb$DVQYR4FeKL#)l(rQM$<*v9BUqtxPK!~kG}0e*WQ`%H9wSKOR^m0jVvRY#!7uf zv>n$k-;oS_VvRyRzoGJX{+T0))LjTH*0GxMdgLA&IX~~_6wY9O^2(f?iY-fi(aHQr zGJi&8E+Sv*8=2aiM0qMvdV+)wZaUv7EA^pN(D@2E=c$|sOY>5Ixx?@!pL62Z5kFJK z%PQ~V9|N)XvtXbg>!+kg{XyUH5oT&42Lu2^77L^QY)ewq$dfj@&w#7O@d_wVF}Xdj zqEDB_pZ(V#_79;Pt2E44lhbIr5-@Dhk8bfa?9Ncrx7!R6AqXLrDwxV{-NMnq zEs*n?-}+8*iS@KgqMK@4u$~sjK8C%)@mHkSv*@XU8e|%BT7+HX zB3#4!bT3FsaSW`$hKms4SCA?)+}yjPx8-<)yS-vFQfLK{I@?j0-%>D0a00?>dy;y z_WXj6e)Pg=xfP(9FB^9FVJYKgw~YJA=B8x8q=zFpo0-E2*W5weSbkW0Af6gfrTf&9 zipSzu(z`H_*D#Efw(Q#lER%p)>jPr&vRElZt``lS=SigQlL^{@V7&lZCQ#M^%t)#?7x6v^}&`UQT+*QB2Bq zzO>i}AgMl{VKrfYCC_jUtY_+M;Tc8>y`=bs!~OV$UMZYC5C?b+eZf=jN>?4y(omG( z#^fs4OEV_XW=x{{*ao*{{~g=#Rk|Z=gHOqa{_LJFyy%`U^sg*PWoKj?4zSm`rwx5< z!%tPQ5UqZfY3(qL~w{^e3 zu2J{hB14e|*D*cHI1E;TCgc4q*_t^L>zxH|ImLvzkk$WBcxaaOY%6KjW9FPqs&ZZrAQ%0 z2`*43B3$?FvZ8Rox64YP>t*u7b+?saCsCc&;i*?fENI924((!nhjzbnIE*_p9EJ-T z3KDXqO^=i~%!Z5_Jcam~bQw>Vj-wudC*tIeKZ*y!Z~TESO|ccf(Lv;C{D!p4$c^(H_3Ar$mbjfd%+Qb!31D7?Qnjtw{5ZyIOaH1Cbcba9s znhCuKCPEoz#>Q-anUiZ0A-n%y|FvjSQC{PP&Uqc27Mq+ppSdFBc}tr01beeg3p;$E zs$-{IyTbz~#Bljk_v3DyO~d`H98 zXgHx~d6h7kO~WACKR~C34GP<_L(Il=q|8MC;X;@BH<*DZcAvQoI!Kr1c89 z%%w7Hbl9m|5-Bl|ARJ4s=13p?pyuc6UsH$RNYbF9e!`@uxyIoedMmYzVPJh{-|W`s zKELQbFLIxkyU(lSnF=@v#raKdjUM-kO}_;tkU{kR#%;9hxs+Uq;uhA7-=~HV&NaUq zx2H&Vque!{!L5Kee(uW?O6HXMY!3dyUi!TTwP$Nx3ItEVvmkT)jItFh)kWC^u7ik>Zko3>$Fd6w6Hl<&b6WAh|x!^RF~W zPCNZjde)MAZ>6UNOQQ0~?MEJ|BKujn;_YRVHu_8b$rehsBWcdHgr! z|LiX-{~(JnxBVqf`8;yUkM@>F4rW?kF1V_O(ldkY%;xO&zVW4#nemm#%=pT?Grnaq zzB821$K3Ii1ljQw+JTrb#A9OF{2TaZow`QDkkBo5t%QyWHA=8ucb3lH$hB*V=ID9%f z`0sN;>J#8SI)}&W&c<_pxV>$_11XgPHU1kkt|8KE)sxizM8Yz zSIDJ8u~r(F2pXp%Haij8s?BNdA{8Q+E0mtu7bbZnCC%hsz$CBZc_b>)g@Sq!vXO;W zJUuBN<=pRSxES?1a#h;frRMY5OWtf zWL)lkZ&;UwJRH#-Q}*4V^P%VPkx=&+({pBIw^6s>s6SZ(%wbx<=g7YNJy3_rnG&Yf z<2?yRB4|(Y1;>nfcfBv3!gjrb62F*njV6jrWkWjJ`zi6~A=e#L#$mScCQ3c&1l}15Lx)MC=kThG zbrsv*X4H^e%dO`2pjklI0C!RLnOQ~_aXw_(fMMc z4G-Ed+!9g)f(oqWWPJ>3`CTHIHaCkr0xB0B^bW_FnuX^hs~RR8 z8M%etA}&3WOWCF-;)mn%e5}uwR=u>aP&c1XovV8`_wi2^e~@e5RexCcXHhOhUtjJ4 zaNaV#yJ|vFleDef%Hy)dhEfD>$v+~$MCPLI10dVSCwphIlQ2{?QKU?+<<;EVa~`Y- zwrI%f8(*R=9ml8m-fH~nn0-jY+jHSxpebZk?-h-(Qp5^Sqr(@;d z8f8)NE@?x0lV0_irUcF}nFQ_eSu1fT%o|Leb5|jO^(sltp~4F5A(^RToQvPibId;T zp#?n6hvxIk8tD;h#2I?U?>UL3FUJZw_wlAAn8o{2P_$;3nK-t?x?hT@+M!L^c5H_k zZWg=ofhBBpLKp`+Is0xQTOEjy@N z%gSVliW<}Cgl@&;16NkCXV}J2t4v;&l*y3Oh45+@7iR85>sBa++GcSp`i%Dq9paGp z&@;a9YN!w)vDHhsL*C-Lb)Qu6Np!y;x@YihD8zxJ@6I8Bni;Y@MNe@}X34!SK_vwL zbOv4)x@^~2rJq2ai;h^qoQ^l?n^kzTN*RXt6I-d9~w6zD5i zOi!-lC>keylNwduGG(HGL7DJ7OJcIqs`BJ1yn|%884S$RO3a>LHYV4B5>+*{;1t^$b`X1<@ra-rL z@7F{+WPNjm=;2B@k*pbO`lIIbHf#EW=JZxj5zgG2wb*|`c8d}8?-#OQQvZZin6?Ze zm~2%a;{NXn2N}pI68^Bp2bLhqiOISaC?XRc@KTrYBPy55j`CNFCR<~V;3TlsFvoHO zI#@Kh(<|4;kpAT41J&V3R|2Flrh4;_U-xYS7M7-!vN`dBItUe%vv9C@1k{#p1lhVs z5C4pox-*shcaB&T3N4ZCR;U?JdM^HxNI`E-uV#VjCW7`V8J@x*){K+iW_-hTqbEAv zajrfMkg|r@&@ubeehdDl_$9RFrTDV+vc5&#;#xrU?*XQtJqy!c3iPWo)KDQoR zBg@V6pjvg3E}AZn^cbDW;{5D(iKkZ*&qKcGl6>*_SYGT?(Y&g`+I`nBoITU{QHSC4 za}L8Hc$32vJ^X7PYp!Q*p=f(}Pfj}_?^m@r(UwGi--(v@o34m3Lie1y<{u$;ps2!%PMI~2nl7q0$=w5*a{@|*{3EVrcm3^4j*ugSjG1MX{QlnqDy^^=!jZeoUIdZ^k008zITEV+b?{sXm2M>tlt`%bDRHnsLZw5A0|O;Au0n@Ms5CxtV7P>;wjMlt5VUaZ z472Ft_NZ#&Z{_2q9m~+QHH(Xy4}MTnbhwRlLSIXNi1!i?Ksxd7e>}dB_**maKR+#= z@Nu1s+G&ye8TQog80OM8UY{8*-{uK)RBz4Vuhp^`Y8EfhPSvzsE#_Tt9?+9Di(*}x zc+2bAj=ev_S}ltb6NFddH-7MU1hZi=H1diy*qT$B-d=Th!KW7A(@YI*_q3?rd(>}~ z-_$=CR)^$H9Q4}X=RSU#Vy>=fdqNW0-@zSR|KgvJtoCXa$9zJd!sKhH`cjL4uVLy-EdstY^|iuHIYND@ML^tH>Px^x zN;yY;sYSrox#~*+i?ays5opOSf_wTcf_wTcf_vg_O0@{?+3bF)MR1S6k(8nq!9D#J z!95DFoJFvBH|etWeCpI>gSKzx+}5b`wk!@+RvOj=GUsiRKjdpn+vJaUT-rAI6pzc= zCa0~X0wCNCjUF#(IETP5v<>F>thULX#s12Iwh8&Ea~DtWw&gFLP}nxXvv|S)f)-C0 z*fycSQq{qysb{p;*YG($MdGw=<3P8+k;+4ZcE z!vx>nFwUsEZk*x490Z=e1gzc?=x#3kFtdDIcs-rp2G@(NoucUXYtVn2LuHnR!lZSB z*POl@XmdH)4r>nXL28OCu$b*r#=5krht0^tiPyY(1t&edJ`4(Wnc=lD^fPWLH7uhP z&aK-rMx*VCg`1MbZxF_@Pp{99ZSoC1Iu#N_Hgz@SFv?vxFI!y@c$D2LRCgfgdET|= z8Z=*V+nwR>(0>tA6Y%883qGKX0`8ebf9FH;5qSf}F-&gsq8KJjpFp7%SScmLad{G; zAJM4aBV{yDM%eQq*8rHPO%$^|@+vaMaXIwFY5kS? zlKFndOLyQGYP3~*bhBGe94OK~T)Ehoc+KbcZ0rXEAfUZ6`+^%kY~Jc|aAPY4IQoHx z+(D}yr?q}YO*eDR)N;M7OBdsY&yp%+PeLhYEA<5y`$E=oL26tr_svNapcXA zeXm9V8OzNMJO&m|>m`E_0+PYWF2q3p>_w41Axj~kkkuxoi**@*DPZ5EVMVfbv9|6DcENFYsX8Q`vhM5U zAwXS+8_v*RbgaFDN#m4quK>Sct(q?nv%!sx)^a~AT02dCW_T?P5t26EsMKPD$Q%pv z)>IKJP4!ySs?*y(w@qvd+as^TJDV31H9qLG8{`f;j?2VDJdp+Mt7#O$(+sQGq2y|3 z#I|P0uc@bzUm>eS`lq+m{5AB~qP?_J{;Wkp8K%2T^<;r4cjZ|+AOr6o!w*Ux7siGx z)*H-SjSIMzU!k0>$*QS4>^I{&ZYk=vi}okp3B)20udBt;p3t5E4C@Q82p_7oEV4$m zo{l7Me;);<@sZsNORlvS;J+4|9w_=X6!JE`EBSR|S={l=;_fsGX2ICekgD*L3%`Qh z()5=DPX;@;z#OH66UJx6#31g6#*U(T2p+e*uZXw{9OL!vGxr^rupax|K>p*fLf=7|(?NAmF zcYIhdYj@&x@Ro?@KsNhn&FG+gzu+n-hyF|vlbZ~Pz)}p@i+QhiFliuIND}9!qU$;4 zWqO8_NAVwq*(lpUkyTS}P7au7E$Vh&!R?FoI^dN%wjyFa?>7fyfZ0cMdpq+F%!$xhov z9s~9iNud1kn&-Yo@;P;>t)#B8wztMW+|bh5P3l=ahju#nk}WiAf6&3l8zl3r9{b%a zAD_E^l>hAL2B|Wyp$yiJQzlKnmm-CURF!e(@mrZ@rywbVeRp^`A2t6HH;N(UR#a< zZ1dXDR`_}I+HswIWt$UyQ|xN)@ZMb#_Ppo5mg2fdYmKsI2n%5^#++E$)4*qR;ci4M zD|r(Y^ZS0zOJ-E=e1{geqw-o7-GjPxU6};p4>9f&m@)|&)8`Q8nCyN{gMmHRgK~KFW{ynnvsk1K{czTgYo@$~c zf#S~ugaN`?nxyXCmpXk(R3ta z#?#wzWVBiQ;dqNuDGD4&Y$E-jk1#qSr!%b+QydUrRXBHKnx|XvoKJU2dT8%9kF8y{L zLyC__0fcq$$2$WLBM0R;L5Kx(9aqXDOW-xj7Zj>(oDwrG@}+2K4hSB$0xLMZn3`ZO zLfstr;xsbPJOsdEQ-lqKsq(0*cIPCPsyDBe8X{RWye{c#@JNh$HIwbmWe^oqS zCj8j!!?-sGmD9Ty3`NX1^xjg202Q_oii#R?1=5 z%BsL}E%sa5Bd$IBk*3+wKimJr-ZZJGsjjDv9O~9bm@w`$ddaeA1w2225HiZ93{%ITC zb5>bu5+1yQV)+W)`yoN=3TU$A%WsNc@ap6mo?-LiusIu-aOno_J-kYAu%HoQ`9$(b ziS;xVW%i$bI(8plFKD4H2X1p6!K0XH*z0a*vc?=m{jhN6)ksA>vN=9+zoWl@GdW1I zmn7>|M8&@;P0ZE+5ooK!{&mKr06r1@OFDV;n~xme6^XyxhBoZNC*)x&ud;?6Q#R2| z`zub-vGwT)x0=jat%FQN&7dtLV*C(HT3`_nOSUX8j$tNrujt*Uj1)6ZKms%$Ip{ z4CC|}7LS!?Vq)d)8|N6(*M`#M!Plj`&>C`VC5G4NT+UiC%<-JP%3!2k%U!>M{}u14 zt2x)7k+GiD6SzPSnctz0viR{YnD1{_XXbn3k3M0(t5*C~^R0A*|2O7)kZMmu|M~vs z*WCFwdHH*s@52ZGw)qZ-vms})XM9m6yOoLmpU?M#uVm(X=MO(&zJovetLA$rirN1w z>-#*_p3~<0-wwF*{bOGK9_QO54g4$Dw_pWleIv}7)pPq7{`&b|GA=XUuPyzA`Mwd^ zv5@8eLwx=k+9m%h^If6ZbJ~1A@v1xDzvAWZalVI31OJBkW__#4zWZ}7CU>xYe}417 z-oKrF`-J@o^ZcEkoOzxBHh15aw~y`HC%8WIx6QM`8S@$TZC$nJw0Yk42X~$my!<`R zbA>eUFPrBK|Mi#d$IkqHWyvSZ-*1-xRrB|iKmV=sH~-A@*P_~U+WZaP=gyypm%qpP ztAF`_dH#N|_!H*uFov$rglGSo_4fn0Fz`3gQ7g|pe+ku|)8=pTOYZ#Xy!<`R->>%m zFVEi^R1RgDKF0Tqfm{76=5Gx;W`EoK?LG7Sc~pB&o4>^`y7Sk<%irVt_3ZhZ=Fflx zHcVR>KlA?G{JQoxkzp4a_-_^E>^lqTIyzNmOssW}pI8)mhtFa&)}=m+Bm06@qYnW@ z!%oBc8ZSE=wmK&OvDH!{d(|`Ojd2nX>u|q+<(w46R=VFmCcc#T74Elb;CQB0w+0|N z(pp8EZG3^I6q>1-I|=!s^%2`lYU^5Wq9-5459CR)sU)PfbAr*vN{)ML_%xz-%j@O5 zipWZ<2*`g2|10=!=f7F2P$lya-CQ1`2*pFP^Qd$l!hG^2+$oPd=OIikU&5Jl!;@c( zhHyd~>sA3WTm)dvkQa`TIQEFHlR?gxQy1&na&5^PL<4?H4XhtaWW*)w-<1pY!((wi zIE@+Yx9%7XpDRO&F#v8c%OLtqJdWVv(3YB#SGZZ!aAP?yn^eZLf6^f&jjofC6X(@x zLL!cN=Fc;Wl{AdAlCM>wC3RY}c4Ev=a!C7~zG{!Fc7LE<7#C9j(%uiWn=u7&6RvUI z=K%lW#Js^G1o?-HxJGy$e$NWe$Lepgdbj8W-dI>ku!yv{@+$C0;U3Hjuah2$!GTVx zO@>ekm!6%u@KY4&6dwOFh40_x6uyh#{)LMb2cPON1-S*^6z|{C-((B>o)q@aZejO+ zyf6;R8jCTT+*stc)o07doVkrRWs4mp#g2E2z2xJ?7NfkWpe6eDDU8%nBByMf*}D85 z7r3M=&VbKQiwuhlZr5&#yVKinuHWMfCgbO{?IyHu<#N`A3T(s?UH|SsLF=5cY`Bni z{)hu2nW#kspEj1hp6kFIT$?^X6GLWM*=f)+7H$}LDv>if;HkvARxVb{;t{X(3UnWn z-UZB_WRa7$)J*B4rNnf`qJk&)-28@k;J$Lo)G>YSoId1YR+FE4S*XGYf6$IEDc{m#6No;>lm zlb>I)vHqp9+mS}@N}L>lEO0O92y!ch^MRI=BDjr886j`pRWvZvqfdy zRv+%}p6|)4*ygW~#HCE#vqw*y8sWMOnX8T2DhB%3OF4LYJ1pfNt@V1f)^E~mPE#vI z--ca5YrUQTe6e$AFj;yOevp{75b&Hc51f#OFxjfagS@erI3gIb3xMOEU9$e{Z_!fS> z(2l}&fXCpb3=@Qgl+V-Ui9aLNR^VP>k5Mq4PDNJY7W^FT@m}5Rq8*!bPp@9zD^(@l zA5qg*eGZsnJIOlSWS$r5epQ~8cJC3Uc%^R&fewfycpIYqbWiU2VAuhrzc|t^lJ0cia$5xjn$>qci(`NYh z>5eXZFi%_hGRJ>oj`oOuCI%ZlBT41J(+PmDg>#a0UP0t}&ldBD0DfNDoR0p}R6|aj z@|?tS7itwzqUpWGs{W0RuVs{74SSLYeG;v85pjA;uK=^w+AJT+o?D;-2N&Du^YrI| zm;J!YUIDxMT@JjQz@6)J#LkMFCle_ySngv+_xe5i{Pp`(ik8=fcDSt7?n1r6I;K4VcNm)N(Lb+){Nz zv9|P!f;OX@rwPhYHX1&LZ`A!Y4uD%<2U66TCdYJ;c3SIB0)QJ%B*n4BXA|$7@8MZs zPLHF#<$Uwxdvo+S-dlb_@@Q|7w&W+gAf*|z)$9@vfX;fv1qH#l_;K-di0KQM8yTt{ zI&hMBtw7wK7fk1P@0QUrfV$^7J@Gn_nh@Fcr{Zw0Wlb^fhuK?DQmyUk-&i(n`EtgcB34E(8;A`NE!4 zPFSf5s|tEJ9^4k$6|Q@Z8aR~S7OJ~t^s``baN(+>;**8^0nagPUeGmPz;h~KUK;ki zY^0xyyh6pLp}HGJ>ncO`_|@4jv{f&Q35~>CsMEdbH$O1aWItzT&t;eei(%%}SlnmhvP+jE@K5Ph ztrr_f(DL(!nLDBfOs+OM@PW^C5T0hUsRI+Z-JmDm4g$D4lhd#I0!C-RBK(q%37 zBicu|%UPeBLGQu3-(wdsSOBs_`-1zCJ9>5N1`t^{m=)V>!MZ==#Vc5F19#lOYc}F=r8Kp?QCRiZbb*;%2bbBm*O6%se4`HH~|If zsZUAMIvIB%3c8|Oy{6%HZ#q(sFZsiL!W_Ex9%tmhcXVMp_&iEJygl;vectf=c~s<$ zW_Lyt*=Z%S!s4$UP@fhmiq+{Y2-L@gkdp0~n1S^m6D)7rYX>S~>U|JKz!$KLa*+0R zyl92%wuY@5-^8}+B2@0uiK=jSF4*E#~-KufKh zViyk+Wr|?|4|=SDIEJ(b@I7jPLqUza%qWO-kh<)Ofaec^`ahVH(UsL!jn;I}N1)H@ zfqu{XM326bZ@vDbK`-OHmr2ae_gCzPL?|8-@a*8pFnhYdx|jJ;Zm!?bJjWUEL@yMi z+Gk~o1vOhuqvxK*CakN|X~%&RuB>p@e!}wtv`L`NTNS9^JoaWbpZedca#|8nADeUi z(a;FWtvIYFj#KV&*}oxfAaLfEN}*d_JriZsfI_?cZN*m?pi|8xc4>|jAkZcE0<~7z ze$m3x9`7m$FGqo)ZmVn>nhf4Bcbq(oL-7D~P4xQXBM?5xFb>o`NA&t5Bc5a!wkXp1 zlner7RCNK{{0n&pA=wYpJZYETnlu`y+NgWtnZ`~knXARNJ|n=Qs5~vWJy>_Bt+-OJ zPu#wi&ed;|BAhPMi0ri#e0qmaTQ($m9oOKRX{OV2Wpz$HPIf4w_mIt(!9)iIxe7e4L`+K zhtQ0jVvjsm;OCrx=ea=rbMCm5or_yBrcK60Z;3ne1w2%b7Z^Fq8AIuq-_w~$k8q4Q z$-)a;(@FxUd(IsaOK*@-!3Wq!j9Flr?l}~$i?a;#_4<=CG!XStg7Pn#pRZTomg%^R zj=UvK01wKMv%ndb_Y^$r)ZuPO;1GAX4V~0Ba-e4iEBTNX`#dBS`b&Z<8l91~<7U1QC0 z7vb^XXivfnFLOE?wDc0ie5IY)G9bdk%U}tL>bD5jrPm))Y@7p7Tk1CoV^*;R_RDeD zD2P){dhwW@v7-*$7)NT_#uj1Rm^f=jaeC8^lenP28KT^|L2!uMPT23`_{yi+4gopPryJH$g}e$i3Q=ktd=HTk|4=)yCCx1LxmR0^S89 z1V1;vBe=Qo4Z+JPaX)8?+|$0ifybI3gRQvTB0A~GDSwL2OA4%l6-I> zmH+`RE&v>Jr6r1NK?WcuPAAe@6kNJUz%#4X(y4@w64fV~jKCf!9CQdU|1)`)&CU%A{ z!+uI6IT?~F`Rll=wd-1glb+@<2mZ|Z?N1+I4^~FRRAMIvCNfg#;z(f5ew)#%Y&hG9 zHu*3s%A+K&VIYsvyvQ(T?65gVds1gXIS9Fh$~I2VFd};!}j9@LuB5%EOilzOB$+R z<(at$JpcmW@H#SDS&eYALFA}bl>n~_ywVwQ5f@}=fZZUa>hBRnus%`$0sN3$9`SRf zfz6z>q*HZ4H1kPmhF30pzmq3GNBo=P>oZ0#kyg#Fi~66G7I}@FU9QFc%lxr1>2AwZ zO{R?sq=|rpu+(g!Go^Qm=|XO6b@!sK+pAQhWmSE3;l65*h*qO5OW{%+(wbCp({mt5 zFZ!raiVJpnFJfliFdVnPY@_9FCD*6T%o!#%ND0CZhwMJVa}YnR><7_7N`|eMlT8E) z_=7OHqqYORWraOP-7IQKE$vMou!|=05oNatW*&dDi`KCMz8Q4}-emflAVgf{-VUS1 zCSo-^NMs1;gPM>yF4)BSr72}9H{z6Ig%`s!@zNq+*uJBPdn}0ht=FO! zVvdSd{IbIqH@TN`?3?9X&P&UL<^>hq50XP5EX>m;Dv>$%gSN*4r4-#3)CmK+wx_* zAdHL;yOgtw=84cBl)PME&odZu)tXnrbmaur(&nJQ6-G({US^fnb^-o)8gQfTC9p>UukNq((6>}7 zI~e|NnZ1wF#Qj7%`gSuMYdo{`@MMVN3i#D`j;cV#hp2qVtx zmPMRtZLv1RcWP zgv5(;M?Gl}U>FN-C9SQ>*K?j|L>b0{@r3Io7kkxYGr4M}>5)4W9{&G^j;*cx)!6}n zwxfGm>ma9LcEA3z%p9Yx8n(x4w~~Sk2lH%oK4m3wz2KMA0!5bXgc_ypz{e@vqg~?K zmit-iY-XX56F0|?)l)`D1BBG`}SI- zJfluzYukG_S5>;CP$1Ing;z<}hujPyshZ^sIYQNpC<~Q0^tK~>5KOV=8)SSn5)%}y zd^fp+U)Q65UHH)0z$oj^rdw2h(;td{c-JZBN(%2f#ohA$zb0>lTNiTC#jPKGrZ=}P zRI$hU)r0>zemzFs7;9z5v6wcAq6SJI2Rsp3ugiBO`(oa*_r6!_Ck!R0A8rkG|1b6g z%xz~gzf8C;i9?q3Saec)V?o2TKSzJ(aPyV zy6-=71_piLif)_xo2O-h?3Ou#pd7`ESSw{YWlUapDdr$IR_&X)IvQ(@;y*=Q6CNkG z?YTsF>oAU_y{q;ooZov~lj6B=-xl@1C&-pA-`i+kBgIGU8HKv|xrNqt8gzovJ-X37 zzcs79$912Q^5?WwV2(QtziHnzT+QxcuqR~SnnAYHgu8%CW8SJcw}bBI#7$=3 z=iwct;cZRBn|e&@?~SjudzV2JLe@+0hC%B!Hk#_Z->xV$t!UA37(Ha`(IO<}vx^F? zZx0`+;+XG;%wMa-8a)rbJc3_&zQTsDlMPg^^#n@QB$!ZoIfWiKKTRQx$ zj~qP4cf+4a5?9+rU+gQW1}s;rxZR-E@7}4^(xeq5U}gF$!Y>u`aTLIhXHeK8&tD;P z{{O-j*;bk@mS#>=cUg;$V@@7fFXW+W1UH7wN~L~fByOjXroU6)7i~ngE_cVyVCWm& z#mo7Un@$UOL6-R);hy#8*R*HlqqP;a6T*jJtWXggwSSZiV?G-Rj)4?E5wb=Uv2QD& z9-r=Xdy$M98e1|lZV~f_;zTco;`XWHgc~@u{{{U|!jiKnaG7=vBz74(T@wbOt99CuY!!~3?;B4$sNM%mYK+gE z;1jbomE58aFGXpnsp^}88Ac$NsKm=dftm+|NQ=Kgrsib?X=B0Zi^0I zEaBtOBFl8J(k5a@?5x2MNz32Q^O4UZ!&8_m`)89e0P7okf8s z>O9-Q0DDLG-$%YI_h`p;P(~PgjrskTAhgpOSr_%+!kuB`N8|gjN;|(E$Sfs6c!isx z3e4{>mU|_sz&B3SI1FQ{_lb3Ylj0rK&sBpa+&~UmeXzzT8UQ8l%>H))!hTR-upShT zR-&(UzIj{4QYqhb=9fs+DiQ7u99sWbEhE)-c6arIwz& z=inY^en0sV!%c&ehx&*wn(#9Fu0cqmYY*iy6RLBblY7mnb5;#bq^{wX^&YED(jLzC zud6+@n#!M}ojxPFsrJ}HXv*vyag{3R-@Sj}AFO>{=`%@x>@G@NYpC`qkXjzR1CZoj z%Y%1yy;XT{*0VEtvlh(e_c>wvGZ%bHD>aCPXb$KOVZ}>!6pEJtQC5qHC%GE>MP=Wz4jl$spGyd1iz`Ux4R!r0>6Lf)Gtj3Laz@!W`-w?>n zX$o1@g$nFe0VV1@V+hEdFAZIEP_)U24{0=HuNXQ0E3tEOEG?J>L+O(2AQ$0_r zX?EU~q#B>0ikegA&0i5XqhEcj(t9+~Lfd1BIlSa$=K zGDp1zEC_gw&a4%(ps1#5Ol6ZIoHRLUI{iN+$22=D2xJeAC5K3;JKYY7#2h&LLv{Y( zy6PLg_@MF_@5*6W$a>dUzR?*NNgl?${llM<8Qqi*%AARJlK0_#d>hM~oPmMl;XZtK z@O}H1oa7-AFF48v3S|W6F_yvPXBlB@c`mR1Cg8~D1+nBUjlty6?6CElEWR;YrtscF z|JoM$GCT3AnK(=Mklr?vI9;5Cm=y8pcX_NDO?9;OCf?mCPp~F*laTfREJrW=RQr|d zuTws(WdAbF9-lGI$}1Q3PmIIGu*b2v_yEGqsMEjgm|)y#?dtL6Q#z5%E<`0_P;SV0 zcEruaThU<1@C6SZm}Z4oyRjHA=HvXLADXFn@}cXJJNimwfbGbu@paY7J-O4Yi8oIb zrOUHqi;{Ftnr7AATq7OsKY(6kL}2(ChSY^tW_eaZB^sPp4}ss#NifI9kHTchfm9Aw zQpJE-ygJKAz}8fMW$}rv&%cZ9G1JKoK7&y~oB!3rr*!T(Za;d$^2Ey73Ca^YWt4a5 z>3>ijXTwjTH~Gezy%-s}y*>w}74s@*$829Luer~g=RRcs%^bjs#NZ{3k) z>1!;Uh_Uz8_f^ESoUfN_zZGP_Ffv~0wUkz!&qSgW=ebuyQFaiz3IrfiKcCfV%@MhlD znJYc&M{2odAGwW{TPdzligQMObO^jff5H^!yZ&QZ+9#gm%-c7fWUQQDtlbzY2Y^B2 z*+>Q?$J(4cHaPj=*?yiG#!AHgFRNmio=qsBN4X273P0_VBh-tY0kbn=ag4Mj)dzkw zY`qb+mq`5;&LC0C8FVHRSk*4$g%LMF!wv*X4up-X-(V8w-OTr9QTXz+{w2+l*4PV? zc`50oTI!TbI6xF6*Ok;4&_c~K%^Pg#N4~gmbzTQZ}}Is>T(zIw0@eq zm`6m6B*u>z#-mNB`G@?kTZv}?i~~4+=gw$^LF6!aq7;;vpnglGZ#1~bHgzwS-h^yh z`dW{RIHIodo$cPYl;(2~sXC+dn<6z*$9CrJ`!YD~JKLR1g7_LK9ru=B5>BqEJx_5y z*$3Z}ysF#rUu~j{g22sD1A_u!R1W$QcPUWP73-p{gejp;UJaUwSQnh%f0=w+P9YDP z2n`j1Qldbm$|4mO_?)_Iohs1=tUVfyc!U5;fzh)A+H=6DH2#~;mm@$s)_8VMnMmRg z2Xh5UK&`O;7D>L3*6v4OaJ-#Wg#k)-mq5T^CDGXVQWDGPo_7cf&Es;LNE1{%_#Mci&GdU7Jj3*m) zda`I3!51t#Dos)ESU?@3R}+%-m&wtoJET+hUR?FV1T&tHUYlSic9C_o!VF_UC%X_G zVrdWFwxhc|yNp$vWy4SR=97=%6Qnj?$is5w!8a{u2!XXv$gi)4<@ZT>GwcR=Ov83h z2&+nJ<}lCZ2T9@cZ$YCBrhb+D1VyoZ{F?^}^P!ruN`CNBLE?!)RI8V7OCBD;y!KHV zVYq)uNP{`p@oze~Rkxd|v^``k$s>uaU{^Qmq;bMSJ2LppPoxJVu&!~zT`3KkmSJ79 zi{UyIJ5jM5#gU}?Dny}C@=T|s zU}G7riWuWNSh{0>V>a5V-{nNtUxC-`Xl6nv6w>3{4+v#=rjI5+3O9mEXD~8!AKj$- z7ym+s6|Ri98kvv`G7UsmZjm%F%sm;F^ho7?DB@HCJX8x9k2WW^a%!Fo7Jh85O#>We zRj`-Ha4(G5-`ZDU-_sF!AsrblIbt}EGw#s~R8i5}6lHD7qXn63hLZ^&n5I0O^B((D zX(1L3tGI2~Vo(cPt`(J|D{ku)3WVS{Y&^TVx~Ndv{-pE?SuSAqlpD_$-2ujvJY2WY zNc=`bM%H`ne-Ob_rJ_CD$EmR$!F1;ulv2fnDCAE}i2n4ndP406H7`c28?EW_{6B~= zr*fmDPVOvZh@Fv3>2y;zDI$0C*siE9emuoTtSyn`p~CS_o)v+7Tn+hSPKUH|Ip7+^_@!(5dHC6gCZC#hcY zz_I5Kg8TNBWzPRS!eJVa5CE{C&)r3Mce%jFp~!wFvq0kZ!TDp*s?&L_I+X{PMi*?` zagu5tu8ZKzTHwrHjKn|7iaml~Tmhhlr$E4SJ+@?z;M4e9pp6D1^#fT$iS=q{tDLKv z?=@8MhUaDeR+za^TB}3G#8zcvM{Je!Xw>>R*g3FBF^PRWXkIMD<*pi%_$F{ZjC7vqUW4fOemdMN7)#ltt|b9a4RaGVjnd=tr2`8ug5+P zETV-0@!+KK$yR_cJp})IOpoLE_xN5|!ip98PP*u@JN>^UL;yCvg3HPk_OwwEe+zfX z1EG0COefq(f(L#hK%@S1%(T{Z4hS}Vkd2Dbi{hj^7+Q7i+}3yOaI#uLb)V)k!M|fBm@4=Lz;t-S$r6dpT~D-APeqDJwPC?(iTs zi2JpLsCP~n1V-ciS=V-|56(|V8e1v`)RfLa{6CNt2!~% zuZv5*o6Sie_XVp?4k$9gVcWZ5%XJ5_tj<$u)Rx7x?wj> zJ*z03vGcQQL}X+oCW~#C7Ll}aU@#80Kt1#2+43W)LH?PF$JC6%IP59w%`(SMp9;n| z6e#;JYi9E3wSh*5LBdY3?^XL~dx^xV&ULasd|XJdohe0M)x8gwee>ThMs1&UC9)T1 zNSCW(;%fvlC~F>V*B=?i!?I=Y%Ca7mSwTM(nDFHa3boiwP_N?y^ZGWmXCnwTrSEUs zsOh|85^Mi7cc4s;Mbjl|WnHdM(c{Eal`|n-(NYtj-xyZLb#kHU1i*(x2LM4+;MY75 zqTC(j2-S2FQ-x=+n#CGp8%(0ek?b`BluT$Rdl%OSS#i`hK$6DSNY&ic6K7@@btjEF zV+MRI#P2X~uaPO(c{=tAByrru8D4I*vLgy(C$)Kf)>XHAE828Wk|8O@pymBgs$&O7 z=P2MXMY-J3O7P15MdR@yy5>kLYzd)gvGh9lmoL`Wo(90>5PfSL_a;XW43Cix*eDAd- zF`2IN;tL4e#=Cp;KUJ$0curk`YPFSc0jVXCN3oK=C%=$xRhJ8mvp%FDm3fGf9KlM~ zKGhzrgsi3kk~2FpO76a9Sj`B;W2alMaQmoJZXdB{kZB&toH-$NnlqC|Ns!=2#92Km z1QOtQapmc7a8n73oicQ@c#5zc$z)~*$rNuoD(L8qlvC%IOk7xJC?yffEl}qbLX<_- z%gO%PQZ-@l7^sR+T`rg`UpOO_2fVX++e@uvF*EyLFb&G+C^6X(B9X7xLl3bd%7=7L zPwJ<#)6Yc7Kb$ODOB7mJO9E1`wPX~J)Tkc(Nz`hPsw39ssP%-Tg%Qzd6Oz_zIQJZ+ zKD0B^{qH1pKn)-abhz{~T#efX*X8xiJWEzFF|o33H(7Lw12q5TpG)&mwu`SBPBuj- zK1iYU-JRw%cdzg@7yg!{BItrlNYXT!U?-_Cp1J3N;Lez;Djq^AggiH<$%CQ`g#=#Z zOgzu0XU--)M|?9!nWNR1&b}BWHEA3TQN3@ghQqW;H$-i(Q&3M*9VMP|boG_WAq#>L zR@R0N)fvz9pA25}xzGEYpg$Fy_8M1(uI_J2sP#<$fQnUUYb}vM)8f2-Mq-*K2{H}L z%Dz$m6Ed|>SC?sJ`V%sxLVefBe1i0$p|dxV+?9(PlW67>GP4*;c>qX(v|;qL0>den zC8biYsOaMnF8g}hkx9nYCG`XWeSDVG3wbc+4^*p=*IMN}1|s~sJyOnyT6QY=Qh3RM zsxvfZ4|q&tw#uM=&M*?Tqgtjxsh{6RriU0VN95SG;A!7Ba$6nNZ>v@Ju<-gUZdTm_ z&F!nI+@{5vDd`Y~3Q)V7Xj**;P`!i0T3)4xOq>hYis)F1S0GsRiZu?y04oI!Hk~tR zgD^Y;ACWS#d4xU*BpeD|1_Rq5L!`((qb`epd#)qd)YOLB7ix|Oa|V{CiCilc;|6J3 z#Im5iq`OHzidCWaR?#~vtgQ3r>XllMP5|Z6QX`f%WFnhRjmV!N6Qd+NVen2Oj6W`vj| z@#cc{nDi;lkd9=0n;=R^mNs}K>Dd~~0 zWx=j_H?!W6X4V|?a{`{5jGfwx=nJf=s^=A=G|I1Lh1HUxH;OZM3qd_^6ldj;O3bfl z^v#r&X=Z_JM)e9N1tAkRjcBWf!9gSXHv8l(k5`GIC!uCHoc^|l0Z0*TKXcgwy*jrP z+aQo{>0;F}gXoyXrRY9@ywZkr<&}%oHpg2Tao7YX!XnRpL?M)uUG`Vz z^P_^!)LcZUzABq8SMWvs9cf5Ms~((l4hJCxZs@0)_LKsN>BQ0_^ zjAq_5nLA}sx-&pxuCC?UaXAdO5+mf>sSJo%>BybJ8SO4U;Qr$7^xMO{p+cSsv6@WM z_^d*i6vj#f{=41#iDVyUEn(4zS!GkzY8h0``qdAmSr~uU2@qGS6atm(d)@bl*K{Z|wyLZ6 zLEN8S)GRjxrTrwa?-{sCppx$u>bpRxN6Gh6z7f5k6R_JI!8_H3;ymQ(Y{n) z(KnJ=u}=){DQGh&DV^_W(e+ZJA+WmOul=+rd+?<|bN?n#JuQkFT|qllkZ56a1-+tz zM9HEnXtfFw9g41?-x4H>61&~ORAf3&%gD%Q+i5&KOpaFG4ko|j=AEwNc1cpXhH2N- z&;U`@pL>-P{Tl&`0t~QuaI1O2BEeoU1d`l?8uLAq?OA4&8DUK*Y7}iSb7(7PZ~kMl z&(1=dz$MXD6kth-R&a6x^4p_Hak4xlD`Q_jAs)R`Fh43;YD zROR=>AV}Htx#v6Az-O+DAMz_vpw^Z7iR@3*t{|Fui5Xvq4YZB1Pt&7e%N8(x$hV3k z3g6nZr7k0cUxfW8o<-Rqh<<3q|0cSKR3LRp2LLbgT`_Ey5VpZVRPb0yVVnDb)l3B z1JA?ac$ei$U6hq!XbCU9Av|^hTGETJjf@*-Bmz>dPFs(Sjb#0uOXN~ietpGbn2xFs z|J-!uEM6;3CY6*R;>!tBsaUkoK88H;TDM7!kecjvT>41@cc@G%P$2N^T&|eb5^nPO zn!_uuZw~))LUZ`3QO)6}ae|qP6}5-jXpB7}kL~6|FY?N{97lG>f`jtT!IZqGcyA6r z)2}()z;h*k&+^xp-yD99=PLf5_fcBsMlZATGcwdytggRvjcV6g+sx~ZoU0;VsK2vG zMWT{1XT{o61o9KLbEjflj%#O&q}FH`wQuKwv2u4!ps!iI1)CH1(Q(n{#Qi)bG$&?B zH)^!5S5CC+pO{0C?ssP{uhR92YDuQA1*{d~$8`rbf^=;gb8qJrl60{Yv2TJWnY zMb+B})U5GWUD%xX0p&2E*T~ab2fTuMjbR^3L%^Lls}-tbZb=UoiYvpSYLzVDiHP;%D$m{Zf(w{EINDhFZmaF zKg3#HRd(E5D>)b-)Kot1Y>KbTXUO;+ZOZgyqD4(@;@^;+)CeC-T*(v(@@#;ZX#6YEHJ&839goBa3~h(M%WoYCoX-!&6w*IMW_22Iaoo z6(6;qmG-$Al#OK-@HVy=k9hg?1V=P7>1g}6a$CxD|CXu#ReFt@?e4wb;5-pibx}IY zYDFE`n)I@hx8KQ&_z#6{|M(>9V@yX_70-wmG5OJ8Op{90M*I{OWo&;2Et_|EAae`*r)T`e)nE`QqqFjmBf^(631DG(vs%OIKI}yL$py zM~54YhpvEtwBOHa0-Vc?7kqd^M&m#1%=HIrJM~yiBNp4B;t;Z;)vj3W39{FbhSJvVdb%Bku=iXqe_`3U%;Q(Sr7l`ZOKED8*^Zy6nuxSC7_0yUEdM9Q51E{i$1qC2H;AC}y^BC}bK__MZ55UR5=tvsX zPBdm2M%_3;xDpB~_(`=g6CGPU{` z3uFlm+4mI4E#|(#PK+Nzl&{hQvyttV9+)>`-oUI>J1};){|(}d3=ry!UC)9@yQswo-9|-!FV8IhSp4n9g{CgURcCl?j2c2Rp;L3?0Yi<{^ zzCqN9up^=Y3TS|;F8}WWlU_0PQd!!)K!B5dyKu7di)-C(YmJB7{uWf% zTG26Rd5Jaj&&&_{;#^~a+@kK)7k`3R`GUR}@jrv=@AbtEf2UTDXIXo{}}_>R~>ADyTpJdiF( zgY+*TMG&Lc0#eB8-5>oJld;AE*)Mis$(X+bhKHMvBcu~sdkZvq&Z?G%so+W-Jl`( z@COw%euUr*@2YQHDYcw#;6+tegf?=hrA7nTTLVJ1xHz~s zQvpG`-qG#Xkn1@8(AvE+9{T)fl$@2yaa=;KKZ|7=UyY1XyjC_gSiY1{CoaNvzJ{x> zvH-8sdF|1E2`MN(vxuQk_p?Y5ki?z=D3k>Gs+!EVl!1>3-Xwu{W$bn9b#3Zgso0_J z-yr2Hc?&2a3Vj+9Bjn|u;J4n6|J5%kKDrjzkfo3z-Z(@ss;bCXxiBsucUO{C07Jso^%WobC!r=(1KlD#^dE zlMhz$>y4G4q+@F&HcD*!Iy$}Ph;l-5s0E=4j#4_P_U+jo4^bh6*r0(Sa07%SIDoncK}m>f7P zIB#&>_FheQe|3$t+Ng7>i!>95`K3W3uIlQ#8ZXI<=_DD_s9s5?cu9VlPLf%3BwLTH z*KYT6l_Yk)sw7MLwpR&fspzWjsp#yQBU!0(_1dTANT1#*Kc1k*>2ejFQ*$Jzcl1^r zeU^&OtvQn0JNjv&Wx{rDHWDq}9cyOl&ev#bcH)d3q)jAriZtG4AjFHm*BkOx57B1# z+q%|K@#A`C)!h>N4IO(XW)gZqvkKc~KDUtAVwAAF3EAS_JX0TPKP-ww9I=2WJp>zy zo{79Beb(F(S95@(n&S^J2Rf&*p8d2u~9VE>Y!- zH|3}UI&>se@%X*@{;5(O)|KuO8^cE3H|3k@A@NEdb~tbLxA20rMl7MIHQs${x=N%f za{_WWUMT5N2b9ESE;jpv_LmM~Ir0U_bZ7f50M}9@T2RssePm}ZlI-#ONBOWXx-rA5 zmuTd5F7iN5!S+`@)9wv`p0=;R_Q(% zPah=dgLV!n7fBxs-D1@*BZcl|UP!w{wF|2}?#^5JW@&j-o_6+~WAtz$K{o1MK83+* zAOdmfr{wF&?{J$Vb#V`QXy>}xot-ev*4CQUr%5;Zs?HCU%wN<51hJhVYZI5KgC(tV zip%Z19|cRcRDBe@ZOfY9j66HJ=SwNB1L>5_bt*ThOgZ8XUBZ5Cxp1o>jGR#fg& zXVa|bIW&-tlab{@jyefogr#pn)?KDzS-dK&V2HUI`x5KHneqF~E2{IrsFpxTx-*pv zy-diE%Ve)Z(~3gVcw%yolJYp$;cYT+W~Ipqs54z&?a5f)yYz*^OX%m@r;$wxdX)U# zGopRG&>i%>ttIs;%MvM$3ph*F;|U3r_H(**UZ*&@v4<7mxUP01@7SlWeOCe{k_WBY zQ@cq5hB8_b(05bS?HpK0Sw0*%mRwx*?dC))rv|=hEs0G$v7T-{`7$rfi6$?2oeH)V zZQx1gEhI0bN-_!W@aat|bg>SVJQDggp<(MorJ@wykcHI=BXOl-Z`9NWAyt1kg9@Ou zs+X*U0A+agmQ*cn$G64p*Z>tn7F7qR`>q$PAmQ7%MVYiw$;60G?HWPdixLul?`hru zw*&(8v#%vEN*-RI(g&Xa=~`rx7Dev(;Y>Ra!e?ACtNOOJ*)rJw#!8DeoK%jyAI*vf zrf{n6JeYq5#bA1waIBFM{(ZtJS6aicK6IIGZjJXTXGCW532Al)L{5zW#kUV+xZ{Vj zjYoyQh&MBd6^dIw98Mv^hi-Ic_sy{m4c!t{_!-=`gUeI`ZWwsOb|kOd`L@3^xGh!g zgfe)#+{{~Faa)tX7pd)_4*$I+!Oo3b!jn?c{BLJcU3%KKbF5R^Z`(&9|JH4LjODMH zw{2Ao(?{Dg-as9pI!CF3V8-T9-&K7n&$xO^8p>;i6>p`t`tOHx#xL9pITBrV*t&0o z=|o0=_6556btZl3b-Eoe={M;B^iBv zOnsdjmtiSkEp^}k9SE~Z;_g`$sQ*~?-nJdKnu%W9L1!5*XX5Fd+xA$C@^}w9p?rXF z1Qutuzq7LmzY#1O%D0!;EDaE$FFDB2Q!ri5@3xPyi`OCc`XM?#*C|)Cn^U>Y_MwCT ze!XPWqpR*SppPOU&cKEGy1*iZN=_D^!9qJBz@TfQmPQXw_cE_kqq}A8gVmJNc<6Oz z0D_~swX4U65FoWd#Lw1L-Gk&H^b)$j#Jin+zFe2)rXC4PT4(=7t4Ac7Anv&CT%jLJ z^<$xa)ab`u`Y}~MCg?{%KZff^p?>7+hfhED0lRnw)sHr5i5^JoMqXUp)N}pu;I*T* zQM~un*Y#Jafwx4BeC!=^%9zR2yGkf>@(F2h22Vk-j8t{kg|Qk2$Y-BvtUMT)_smEs zCs1FEat&lEi2F%mCnGMA`9^@w+; zLL;M2UocY$Ov{$i7B$wGXeW=_xG$u*8a}kaOoj8kQ`wh9d{6@sH6-^=S(%#S>1vRkGM$P45p@FC!e}y`(2t__aO+_0Zdofs zHfC~?LA|2lSR|;|RQ%l$8?0@WG{K?!g0(v&0B<`X3qudwHi@r0D(YDcUUk+wk1O;T zwT42f#d5On%kG7+*RaB8>4_{P!y6ShcoVC_l?S9*dKDZ_0Ju;pe-1ZS_-iM9lpF}GU z2*q1(R=$pcujzkBle4vBsg|i#_eZ5Ftd=MtVplo?S19V`3|frgheEG->&78b=Z8b$ zYovVN+&jFAZju#nI6({@?7>kaY8R!~BRtK~5`it~2MKfwasL#ld6H@QbEhD?DS0pUY}8^St_xC^52UN&GegK%CetTk)Aj{f;oQ`> zRg+>pY3Vk^RV?=k;pK4u;YkX+1S+)Pr7>Wod@)T&a;{?NNLTdy zE-mxsw}h}X_}ude=^B`svgArn!0aWDekOBJcXYsK)WLs|(!?u903+aLVTij{A$xR4 zR9vJJL)L!x(KC;AY6EZF70@+*qyW*?uL0o{c~N$J+&}P%Ie*N`{T@al=v;qHsjhZs zb?1{JB#ZGbOk;hm3%SQSp|5ssbG_BWw0~HLSs*K!o`%03pr)aR12PTUU*V=~S8GPm zn%4-8uaQ~nYb@mbIT8ICp;j*ujijL`ZscW{Ec}8-z8>uA?SwuyU~VM9WDj}6^U|9%JwKt$S#&cGQ6pHGjV3VeW|@jM$bKG|1l;& zufqP5!n$*Mnd}L}EVaVbZ&9t=w$q~nRbT4d_Mz2KLt*x4YfU{*XX53G1yd-s%~<|+ z)Sj7-)sc7HZ4+fqZcxY|%gm+d8;QLA=ZeLPE5;nW*vk5%Kl&NYE?I0eZ(fnuCAPYo zVqX#Mv0am;g_^Fu&U-g~Y=3PZO>hz`07jgN1QqeN6>u7C6w0taLNuN-+zM>aQfU7k ztbA$;J+M$^j~3zSv8c#&7D;hE3(+Njeliuq+|A2k-m}SkHf)y`;co5)v$A7t0SM;) zZVaG`KE38|PLdlV*6wycbCD>zBvrRxP8GT|MrBEd~ivi8$CL4%&G|%5}+Cdh?GFoRQ?#lwOAN8A{uS{nZ!XwYcQt z>fNY46&7#Az6=I=o3r})zTF7VrsD>c5);~|M7I6_m0cypF-v@3)*Y88h<^qMeZ~ zx5MZCSdwD*hah*d)a#5n=S~&9OrlqSzC=rqTcV@S*U^?ldmdOWl;|^cbeWF+zC?>& zF}Y2NKEinng%|1Qt0eji9es^NzeTjI_gu9bM3~u2fU51U*?nxIBw00}B&pQi6^mqy zO-{iC#hAU{S3rNlW7QDdrVn{{>nK;`FURZ44KXXlzHk#gC!1AHb>Ks+Ijz;XG9MOE z0;YLnA0RjXLEGkt)eQ25(o!}#hcfL*u4(6eY+F7hTxbzZ+61OBN~>`=bEG;q_*?-4 zmde+}DY)%j+}}w^*vf4Q9VrkA8qeY0)AXKG75w--?QAwnVr`MijaNI*6c2%N#4Npx za->pP0#rh7&>yQimx4@G+?=c$n30QlZM@RSyUTR0W7)^6^@x=V&C2`tnJ~WAl^qvH8@;2FqwbD=;j|X36zkoA31h!Y(Mc5PAXQCL)sYCz=yWT~@N$KcEyy!YFdbo;aWz*63tLUoRB&VsO2BxEK)=^hW)KsCK zwJlR2vO3>b9a+qwfZ0gVYJhOfA5Y)Pz{9}$jWt|o<5}$J!pMs@AZq$2kX64zacSfvZbFW6~&c2*^ISveB zvZeAhx}?v0tSu%spK3~TeO0Fl0k7^CsXS=SZ;(PEE+yMghKhG)&VH3ky|FQhP^(o~ z&d+X^!M4AAmjdQ2bMzFhbBM20-Ad*QK=qg}l!FoCUlJIypHSu39u>fi1#wAWEDJ$lWn}+KT`qeW#;2ybhUWxCtnSh8OZz!`I{Vb$BUIYTidD$oaFne!y!DuN=;#IVXU0PXQk5P3Wr(7sfZ-Ygm^& z*-3yP1RTTlqfkHcd1xx34C7-LfB*psWer;yW?EWk86&S?gLgz~i za#nRaLv>W)inMIhWwKUu&b?HYZ|A%cO6bbZ=~~v;I4;ayA>&5h`P{xF$LDl~Q|*uK z5S-^?R(Dm!!o#Y5eB6hrG>MGG8zN!N|5` z(KyMW#-{o&u$j{382HB!<|}LjW#G{Ez0#7C{^ISRPaj|EGC*dAWB&3+Gk)xp85fzx zulCS1r%>b5W0b%I=p>LkEuB1&JAU641tMZj=gXBkp$2s^> z!^eTlvo3-@OAuSvFEu@MhN9`JG0wySTpk?ri1oq(Fyg~F>kv1^|T03qu=DwXbx zqBE?i-P$@k@^hk}RvkS2lIq*B810$7uI6_VOQ>q%7 z`U9%+`OS~5mNLOpU+TZ)O>ii+l#yd9N!9LU71Dz2O{_*@f=DhoTpF@E+P{VHknpE^ zgrCKURY(W_tUK7KyMQqFy(r~4WBPqh9wXy7v7&#Kx?m)nn?c*Bbo7x*6`jFj6-JLF z`ZM0$pAh{ydLG|9IRW*mScZx`f{%)NYtrLZY_(iSh+$59DfxY=0z3S8eNxd>Z6+wY}2G`_~?JPwxt`teJ{<-Wq{syyrUZP?b_ zzYS^4q@{jD)9Wxi)h6u2yu3}^MCWTU79_^9D%Vt9ELH|Ls>WsoNV72NlydowrP#@m zf>$uDA83$e`h#}CPc&BAqPV#$x9>QLj`3%5zsHEnFBt;j#=63uoy-r`z9?)*MdkZt zjPk7!JCw{-gU*uJ)P6rv$TO9GPHRnR5`OV7(xEm6%2-qFP(Ai7@`|`au+8N%OT-@E z5wTCFASnX)aVfI)67WTAz_k>hK*N;$ENk|Y?O#=;=*D6Yb5jP#HFtl#bCXdgXK2Qn zO>1TL7@^J1h`vsw(|T>&NAcZ$|3Qt}SUiE!1Pv#S;j0##bny*6eZMn-4l!GpKw}Xqt@<5BFhj1M!VLLgMBc~j*U?{*XgRYc+9%Q1 z>S%ka%AFe5uAIej(%C^e*c?9uh6+iOYVV0f1cm2-Mg4HA#1((zFcHN9l7g+ z0mt;}&w9T!z3#LA%1Xjxs(wu1!K7=V1UdG+nom@J88(zK-0y{?tQRZr6f#U6H$$-=@aA8y@WZf?%@*R<8!zmn!qwWT7(T! zv9d~iz+Ll+@Bl{LQ)E)BhA>0B-R6sB#U@#2>h|9IO=9K9`U&K(>`muJoN;VTPgXnA z0_h*_zxCRV4%ORHm! zhIqH#AdPi9I4V*1;sog)5pln?bL%^D7_vq>*R3Padfjt{EJM_Tiv&elpuJ$wV+`!7 zcKQSq*+`IkG1rT=?~$cr}7=2vlO}fBQAF)+Ki2sxTWs9x#jhFf=ySR#-N@3P91xL(GHm1m(b zB)j1cv|wm>1ynyLlH8jqG8itGvJ$-S=NkWc{hPxZF81bbeZ@1@rutZe$jS5TC#_7j z7t~igTOV$cJL5_3&iFcYXPg~9m#9xueZD`~dHqyICLa)#Iql?*%yz+54fkKUKkuc; zX=E^bscMKpRY7xjx#0V9uZz4iRd20@t>|i*Pz-5V4lRpxiBhTx1av=)`#^uL7p!%3 zn6)znJI{=-H(Ab@f0n={|@9qksWxv`emvg7ELQt*x zrZqjkBqjZz;*?szW7V~KQlBn_{hPYd6a=5>Lqhktt}2yE zQg<}bJ>(x!pVnu?1ocHFmsFjPwyJdr*ESbQtDt#jD36?-h!$cex5VoSm6-)!l%3w3 ziy~WEp4U~LoZDfM`>e}bUq6W(y%5&GMMV>w2%CQ1gc3;6?t8A(+oU*6Wy4=2OG!=+a3ImL|O?}e8zVrbfBWg-wYhtl~0m(crXgRvvdq z4D{Ub8j=yhCuaPX)_pLa&cwbqh`DP2IzeJ+B^FVG$zxdxovmY>+8q!_*;WkGvjd+B zBIwnhOF4*r$_U1Hacy*iKfdE=yotS)KH{^&h)3)4Z@n2H;IlP(wOZWa@DFD4mc|UJ zH?OZ%@l)_4-Hn2??GNUV!mgn3Jjam!u_~5AMb;J|y_3ajLqOu^w9Ol@wZ5>iYK2R~ zR&03KnlmD7-7+fTB)&#sY%T7K;Q8V@UY&(C6du9Zp#GBC!q@A31#341PvWcc&&bCb zP5*vH)^Nt)JTq!M5mBe6hViYi5<4WXe;okChb+EFa705A$%ubEy@=N?MchTlnHt(1S@D=$y`aV#5Z!gHcIl!Nv%{$4rTi^ z{w|rF4oT$%3u&IRm+AzE^O~!QoP&9%kDynh%#v4(2d?ZR)y!#&SaSg68DDjO0SEWq zOevpSqn^_iuO6b6hMVZfVG(OeZm=aGbYA{7evcnXbwPR59-kXTy@$FZ&Jtyk#+uR^ zKh$S-j#4DR7|o$<-c`wc$5_c9Okz6-qP zAoV;DzO*ocg9&PkT^y+lj}mt!Lz8Ap6ST;)+^+Y7N)Uodr9Ejl-u_C~ReuItcB+)9Utvp)j=*ryNA6|%J!^PVDr1E|7+<5hCU){Ne+;7vAGxQ04MsJOuM6et zj4vtPlY|aR4F&DbH7t6#od^FnF{!3 z(5jmj$P$yfK^a~BY5@HQ2r@;L@IOV6 z!5Xl2ZomWVOT7Ra7(~q!z;MaP+kEvV+rh*_{W^%(pXyhr%M=vE=d}8&E|o2QeAM@< z&TsK)g51Sg6}+GVthW_+)vueo;y$1+mMfEZ&>uBjsP-rA>(xc0fy8%GpK=InslyeA9TmmCzie zy=UD}fEkp9@um*bzAR$xizHnJBqvH*q^nu^5##ZF80*Nvb{NerpcqWM&CWJUHr@S_ zS+XUT7w-tfa$3rZg!cC4kI|y2{|`dr)kW+DYvt`&fw5pFFZTFCC#%@BPp7_DVXYiXaU0wjk#$@lvnZfY4-Tjto z=C?GUegRa57(g?nna_`u_c5h9dgs+dKcJ&WOFJIb(O=fl>m@p_qtBP;9GdqH515UT;p@^mE~}v&(q2pA8aqAxI5{`#Lv=?C}FZ z>#(&cxMh#{xv6~*B=IFS-Zu-xG3q`O7(4?)AM+jsX`{}p+=`NeGtP?Im%>VL!aq1- zY>pa_&nOrLcZ|jO)Hk9fpWJf}!*MCL`3oZ0wO8hItAQ9N!h;zRNmZaa;uPHxD#+^! zabFX$-i~bhFkJFB(#(4=4AyQEc!RYlqH({&&t;h#28zm8=laOD_o72F9)5Fy7DA@_ zg{+$ghKo0btv7@5!*gd825S%3ko%r%L)Mm%J#e1nMXa9Z4-RF5%_vm*>hFg7wt|%l zT#>)X?pB)|1shgY2vUrk&SRB2uX6ftgC@HVU8<0!Tt`PF`Y_diOHtn49}wNu-QDxC zYkbtj(|26CQin=T*g6Q-md&j+m&;;`Ij-U~0?g36Oa)=_gHj z{1VmDzv$?89;?pM(Fb^U6GV5(M?85&XVodvKzp=`O&eR%QiHBW$o%NO-(0(Q8HIY% z>Lw9*{X>a0^6LNyal+GN0)0A8jvM*fp&xBLxc0HAk*Az@ELcUYV)~8sWVQ0{h|_xh z8ROe9hs_KVub1zWV5`LE3;wOu@%z})rsGRC;a*wavk>{SNAFiFvt_;)bo#@18Dv3< zAEvyL%|>*y+R+(NoEa8xmH8W=-LNp7_?Z8&=%&Pv<;UETO==%VN-jQ1C-smZJL52S z{j#*BBh#2a0`OXtS9jSgs=eq?^h$QHaweKcq=sCF_%~Y4GX(XJH?dLTLac!bu>oZb zJ||`9mgryZgbzF!XJJy(cxO;%BzdGT;(v+YL4!lqw$RY+oYx`X7##9{5-R=#;a!EO zs2?kg#5emR{>>yDaaq`UEj;v~n8ZpR9UR6jSn+O=hlH&^2Z#PS3_>J7BY1DPcrOWX z#5D}-x}Q>J+-c!Sg?Lk=teV9GrH*7@SuBiNUY)hSTqA9Cp zMdd;HlyQ?!vvPY&oiZ0JUumGX2a`ttdV8pNJ3vP(w~uWJEm9xQ3$AbfGu? zbAHNkDQ+#J9B~?<7Q{O%6cPRqKq@f1Sts6T<8xN~IJo9btZxqI$vKuWe;hCKa)R}K zJG|Nnh@Z^ZP+VAw*U20Z+gcG`B&toWc86;;l5+Ojq<5KWuD=K$_Bt>7Xs7wj6TofMqzI=ZJbdrMr5(>ub3a;kO7hL0E%=_W` z_k#!iLg7`Jyq0I&QQ{w0f5#PmcB~+6uydWPGF&YwnbQ_~)Fh3`@oM5`Fe+6Z@Ey~T zjPNru8MAkY9Renhf;sBsvlo7R zg*r+axr)cC`vI3_rIB~H;6g=<|6ND_tVi_Y5`AcxioRP%&+ZW|IovmO^mRIVN{?ts z>OQZdN9gEp^oX7=(T@_{lO72EV&u}=V(mwosc1_SPrB_zpnIAhsj!mJk}2)^gdLCX zxjm3wxQ+AEh#ugD#rUBcj#9K>lKoZ#J}F$n<|_e5$fH{ zp-3*lHBlqU zPk47fIbUJH1|5BGkLYTN{&8ZZ<)P(&D- zwD9~psWl=VA+1SGCKQopW9MdTKmIQ(tZix(nUYOcI)hGSS~hac8rQ6I+QvJjr?bk$ z`iz@bbb9Ixeg}-3H;f>ZTEau#FRvdqAe9sL?Jch_8X$p1jO8~XGUfr_7mhb+{_c1S zd5)G$X*Ci!lM>?4OU2R|lNnOuzNCzCFV^G!Gv3`JY>l8DyLbmJ=JtqwP@><`(J$)g zn|nl8N%R^W{c9Z^=n*YR-N$saltkg@^oYJnqN|DSTHd<(-4oFVx!-#{eee+`_|nBc zvRo+sQKZHm|JYKNOJkAQ=E*}%2k&G~Q>E_wmF0*rbI?v}O3m%wA4W==jQ9ewc5V#Y zW>%POPItg2B#Yin@Zo*>r4*`ZWaZo;u>E5}v!K|6pP{l0#|mVof% zz7$_*)>*^5IB>5mj9p-?>RyvaTF1JAcen6s-hRGzZw*CwZ1O%>L-cPy%jP3hDhB{uek zWbWu<)D+=70oE5$Y`DCo>1TztURchtnV}_3ez9xd)KvJ}kedL-+?_PcJKCtV_NBgr zep*Y0G|$8*h`#gLTJ?@uX_%;gyl+=IHP$7a%@)tpUub**tp=^z0yLgYxHNt+LGH5i zRNovToajGFG%^y2K24%6qCviHeDB`RV2?M1=VA<{3YViz@1l-_s)JFtogylPoXMtI z3Hp`DPehAG-C495VtW`W%9YKWV82`5Pd0N|MeOE`x(5gWsic{rCy_@^ z(OXMhqUc$fJ@60l!<|*<2oW4>kN7R;)Wb)|UY>J7nVq*>G%Yq^Oa;E@EPRUwOa3x@ zbI_)$UHYN1u@PO*Dnk(qAt)!vD z`V-_%rVOG7=;-fA^fn#6f_Jw>NAKsI?j9@Af7a0*5`CtQ-ln6!BGLa(NAH&CBVQ3@ z38lG|&+!{_|3G>@PCvMlqDW5b3zv~mWVUcLphsn#BiP($@>|? zu8}NP1Br&8KXy&H zMMx%F?yhFFzlpX|r1F>+3w)L%z0kzPo2uzZr4mtNjfGW8k-W)U@eGy^t2O;ZXYsN5SLc>E=`G}A; zp7X}>0lOmK8qc&Tu*PR``wG3rTZ=+Q#gULzJ;aU;w`LSrGX~kQQHYPMa@3%1&NZUj zIHTW+jrIupqU4UV%}30GxREVK#2pUslv}!T7KzqqJ)b=l348EM-SnffJj)(Gf;>uV z;c41dvc-5P2F*CF4c!C~tqYny1r)e+0gx8A2kU*(=g*x&A7A0B!H&ZW9tHr3YK zVe75n!M8Ak@jj6}UI`C<7eU+PaaLa3TF;I>;%{Q_EbC!~v3zr+Hc5$vk!1VXK~9sA zZ#aty2-!1=LU#3#a;NBQwo*}Vr&XODw%$uU!qz;5j(A1ofr$S=`&|sNfcy~o0GX{= zULUxvAd&*>CB|bRZ1~JRlvb1~kl(QXaM0fzseBv3VbR&730v<1=%JwXR(R;kyzLC* zTGp%iQzn`ri1;dB6n3^OM7N-XFvMycMRu*}tx2 z)9l^dGh+Sm`x&J9Y_%6W3d}YGa03I-mf$vMd7wHQTllGaklRm|f*FC(1svStcwP1d zR&v_HXyuop*u;pa+k14~p0mStL3rr4ipuST-<%(*U9bBzbv6*mC5(0RYMzKZt_?vvRztJhY7uOj$370ms>=itmN8u%iyQp^s@D zfJDJ!rb0dFVNm?X&czA!2fEcvVD9$GRmcb6zR@iXm;8YH4q^KT1>p;RfK>Pg1<}k~ z+B(;V(1`7;f)gK9KgVHkFRIc@zX<7byt=?QHw)+4g$N;g`V$hZy2TKI&h^3g-2acg z_W+CP>iWgcnNwzf>3s%Jtg-iob%r@0Cj#zbEe)1xMq z7^Be`#fBxu7Gv*5QH;G8=Kl6M!vH4l``!E9|8wv2e{K%!Is5Fg_S$Q&y>?l~SG&Cx&wnp=je!)(B;gAXe#*Epw5LAq zmvTrM^|1xgC-?q#^o1z6?t@DL65P!2ARxMsck#GfEPXZkoD6uAAeTbPS|lV^z*Wtf zenb>>B^|%OYu#0XWr^xjGC!P+ptbo?lvg6YK#=mpk+ilWl!$Hvf<^7{K76P7f{6Ia z#1wFkRwi5lfM9WXI_x4kwd4EJEA9<^(VO;kBMBx|CHQaYWAdj*!Z*hka*XxY`T8mA zi42gg2=mVx|K3H)KVIuLNcleidwF)q-{v3s3Fp8>+#P{S&`T!z3aE-7@0b68SQWae zZ}8{6@@a5#7DoXE+H)1fEC81Rp~h0erjf;862xMPf1V+}es~)%qPLY6GYSD`oJDVv z5YDowF{pM_1?O9{i=EqmPD+-X{!e;c1O4Q4nns*J&foD3FYp%BGZm-|Slv>-SPC=;SABpb34#!T*h+Z1 z{9E`yQSyKut&q04Rv3tLeMBT$1L*Y>V&TvQ3Uo-SSaL*Xu}JiIRdt^-U@t#zC!Mv5 zBfbhp@`I+;WArWDK*Ct;eE)uQ_>DY04!^h$Jss{KF1kPT@_sRxOX|&w;573*7EKmYXY)STnl&IE0?TltfQG`iuRmz3S^2?p(WTd! z0Am+&X))u1P8vqMW-MPDUDEFXI?|)+M^D;L6#_F<0S)RY=%k7E&kBfm`bN@XtLNtr z!h~e)EYU~ZwUCmKuKd7TDiI%yXY^EJ{irTWUr?#P?bA_1_M$5K*rZl^5VlAUJI<#{ z3Hn&T6(+L4{}cjM{N_x8#Ed5GJ9@)YmjM7^PZ_6tpqWMl9fp=zLyA30EQ; zV4n=^ zn9$@WA5G4Z@yQ=1ktWjV)mR}b(d9a!3%O-aq|0(xKoigjQhN5xS z3dRf8uieG+k+z~7vhZ82^PE}l~rux?;A`n?ck$nGfwz#*_i}fK&D2KT6VPJBQv3mZ^DdFLqb_%;4izPgqK17@nCXIjzbn`66YjP*Bz&H|U zVAM?Tz#1QK`C)Wb_dmvr>`K32d6s{~x*{G)(>z`&HuMB7NIg#^&Mp6;u!>C1Vt)Sv zEEt>eV8TQsyon@?p(F3ypN@p1#Dt@K3EwY&xhmlukcr}0n{*qZ;TlsM1wrdyGw^rx z@t43si8lY10L`VM&;dzO6#teC`yi-E^Zz=2#!i@V)SpdHhV%ZZ-X)$+(EByoHSzy* z`VU6J&(PnWdL(@h#gBc1jrt>DtiKic?tibmFJV4{r003NVtMW6|1aa8E~LLAwe)Nh z2109*KAC+(PYRn$i{4m477fMiD~sGprc5rY(U(Sb`k}R0ogTMBb$SKW7!_d)oXVH! z{0+aaK8Yu#6=1{WD8)=8F1vb!vn(VXX4{=OhD4Nt&XtwU?|l0I$QcKP85qTGcapJ~ zc<~bS+4Y2OBY%0Le&mc}&dSZs8AqL!rI963v=dvzV@hHh(s8MOMszW@@|4EX?tN1a zXr_HH*70Z>J6x-l`&V=#?LF=iA@}!@&F{{_Eu-)sJ!!Lequ-=5(Sw}$x|P_r_ogRe z9#j@bwhlo}F|qw+GU2#gu6Is)Fca`6t`cS>V>eEj?D92yI;T7coOpJ-Tvz3IRC1I} z`~z52)i>;sqqbvT4LO+x3aT48%qkjd97?+9US5pwg^#qFDZju1Rc*Jptpyw|5vvHC zq1_Jk9!|2sPKmS8CAqXv;`B;0zBn_qVmMr@;LjN3-OeNEc7Wem0BK)_%eMNIbSH~8 ziz2sH^qx}sbVj_0bwzv3_imSKv1)$86kYM)9f!t#qLsLz5ompDXL&Q z?rH&s36>b951h*1(1`q$E_p8{-b8T;ews|YUxxSJ_b1W1W4ert(GHI3kNtU=&@S4G zsp1Mg)Btd_^5e<7Xsf=vMc;vKpryz~ue;&=SfxOYtSe!slZ)Wzl0`a2tFIEe7j0+) z{|e*VWX;1nsH9W6Pz5@2oS=6%&OIQJ>7!$@%}0X6T5+%^+{m;l5}?XeKmnay&D0xY zg0l!JKq;VLrQ!NkXHxBp=ZZKCw9`d%yC5?3gC(z#Et@21p;#_R7eA9po?>w?Evavq zukvt0xZKl+X!>xJ$U}Bw5Uig1u*%1WKnXO#5{X+Mi*AekPv>@qj`8k}A@|cFZUN4! zAqZBek$}(2I8oT%U80VHXnc1S%qKX$NBG8vb_Z*TV0~IN4V!Si(p`z5Ai>#(ZFI@R zCs3NikRA`&e&bV|AeT@D92bg?M;4tb7H>U{D=LdC=}imar#!7A3URtk0W_>$k0PRQ ze7Kh?2o_fvHQkKEtOylcjPa)_k9f_SYXJ!durU*H7(^vAUO?OHK%b|y97|?y?0-NX z`Ota4a@r>GTn0_Q&C`yrM+8a}c?3<<1T#WL7d;Z`QDm3SgWOSYR|wxg@-qQ-c^XM9 zqBvx21oP5bHWnpO`Y4PEc{{cUcM(4d6N)>$?JN=M$S_5T3)@P|>wp|G?4+s)6}oL8 z1wTH3Y+l)3w53AlhsLhODLX`%4C-gNR7^#Lx#~=>1sq zK}sbyT%@&T+D4Hz_m-~?@)r#$DRP)QQYGw5j`Bg#gaM^8v9t&oe5DA!CFxgKrI`fj zw|LNrynctI&p={&9r33W1pG_OYdOwQ-39I(BhEosS0O zWKptWb=nR@kk0oJs{>SZlDxnHzrdH?R3yHAvC!`uM3(14zWWLhOE^&xI~K1dp~G)! zVt*%s1ZTJsOp8U9C^B{~itWsn37r)PgRA5_i@I8*PBb#22q{?U3yV`d2*uWs;azkI zcL^E|2#xY^=-H-hAcY{)%pz;YaEchoKQ84U8Llp2RK21yk-v*wcd)MVLa_^-%Bb>U z*Au+17DJC5bpx3pRTj6aV0??~vr#&dTq*7VMewLQ#hySG?+19J&o}BxacrQ{S)|6M z<_nQb`kmqu!V~0T!V+f#*;RB!@+#W7kqEi!_6#imWEX)= z#;By3EdG|HO7`v5f=^n_i6Zn-$~gL>4>}gU($^}tpp``ut71~4P(~#Lof#o?MO}#( z=mN7pbB-#1>_emBYDG{C^4aV_LsU%BQ;Yq zo5dKy$BgBJ&}R9R`-NDvnoA(nKBZyG1|n=Q#O)w5rPy*7%WxQ010*BKp#eCX!x%_b znrf!BL@1n+lmI|TH@tNG(drYGaKAVRi1VNRMPA^l1Cn6!u@y6G?m$GtO3~Q4i=?Hi z>Vhjo>Y;Z}rV2|sW_rZIlvIC_TPgjqSbgEtYJTW$5sG6seBdOEi#M5uaX|z0BN;tm zwK-HgQ_gF!dbIt)^Ui?dQ%bQW^fK$jsngEzN8``_NNOa`8a`N&9$6HUKoAJuS1=!o zEudRCC-%0n&VY0(YV^-APjv--w5AP7W$xIx0lFu90S4WZR&XjmN<9Ce&zAh!TL< zl!rNo0vz=dU94JtjKCIeMAl4Q!6MF6{E$ZY3|54nC>Bw|y30uq$;{>G-G8^8?e zO9aZa9R&SSsZo@6^z9;>=XR0JbJ(7zD$FC>!*nH!5RSAxLfKJm<~smLI~uh|jc3iI+Y;C&SM z{%hMlP?R)7;iUzqV=&c-GxPzqZ0a;ZdlE|mD&PdI=+rGj5!QsmgQTz>yB$kNbQ~MJ zL$d(Nh0>`w%Vs!GLrPm>Qp*rvmY4tuQSj31FW~gjPDRuHg#iLv&8XKY9QZ+7hrJ>P!{B}hqd^|dR06kF|LR#*`oyP1}2`1*SbDH98CNj z?B#bM6~*?5aM;Bv{`mv0!~virh9dV3I>S$CW^Y7X!ax#6MYyQsUhxKk^JP-aMM#oZ zz#Sskx)C#FGgSL!6SSa-HV{8UP(;{5d{!t9AU)tN;L)2P$oAOOeYYYsL#7@gNWiA^ z*+9xtp9jgO(XV9A9zuR}nd8WLjkClr zQOzu##`mvH5{EG3`%m3e5EorC?FgVomy{eKMP4%Z2+%+~K!_{l2PB59ZN+VU0V{)* z_zDE4fV*`87;In$j%*y-tRUw%9s;2zCJ^FFN4Ao(69>YDppbvO6P?-y=%R|eH0v%w z6dyY9-+svq!P0*m--;fccXRl$2?r`z0uQN{km5xoq^zAw>JxCDD>Z6UEuCbn;hZ49yfL~Pl_wu9Kxi0uzzdx6-9)Voaj2N`5G zLtKxZ(UI7?6Sr7mYe#G;#MXq^CK6j6Vw+EFMq(p(QCi6dOyta|%4U1)eGw ziW-#Ag@7EHo9E8Y7r_q58J$nnOLM2T?3tOLET)l+FQl55j0yRSJaNQDoXL(YR$A&cyYui-J1b(t}!bZAB=H!hHODo9B%pM*l!hHr00CHw! z<)o%~+;L)HibABY?mfbq6l7+5x+Hs=H5D@k*W|F~1e2CMi9J8_bvH7H2lPnD%Si<> z2ri>@@WDEnvQqLr$+;wVNgD-|J)Gd)vL`9}u@ar6^a$-*fjBeuCsn67^G%FTlN%-Vl3EaY;tZ+ zKHk{{Ba^c-v)%d0s9j;*!w^QQW-WV4wGr`Zz!}gx!r1|jh=Ak{C-F;!pP!nN<<3hk zXf-xDB{j8RB;h)M^f`~Ja+V@Qj?DB7aEpFv1WJJqlgw-qZIu7Z2fnJlr@3QO#)7C> z{^Qf)sF2YCFgmmg?8)eoqo5d0&CdCuwr5LZeF_q{KLF1F45Ru7w zIip3i{~|7{gb^COsxV?qNuDN?S}x_!C)YhGL}b;*I}wGNGE(XRRpkslnk@Gycb3#S zLU_VQ1M^a{^V4(kM&escCEGp5lkBN-6*26W6qh`3fU{p>RQ!OrM5Qbo)js+s!kGkVn?%6hh$IFCWIryTKa@ye#@TZyD6%6 zoO4LBD>|uP-{b`6^Re+xfy9%9GD78~r=w*fRnhN6B1$;56#L7fokYSj*gY&k%!3b? zDnK<*6~p;>F58nMev0uVx95`v!3nK$%bo=gOL^$Tk<>+pQ9g$%c}V!j6P1@UGNShY zCsjojl&?tGXW5G)Rkupe5jzoezBj2BHF#@mRZorZZxs5vu{p!rC1ycXjv^i2*!bSb zvGMVJlM<3+gdxeGpp*+KT@pUgA3^d-%FRz1nVaQ~7@n6Bi@sSxN@iYSVq`lC5}tUV zPn(S9w;gatV^`J7!FnlQyaB_9)sE*&u*x5BYk{qDN4#3@k!ZKk+43GKRn+Ur2gnW;V${;>esFPlhjQ z90q2-r<(9hMu&mwO-UW9b`;%6Q1nYsT~kKpqfZiz4g$u3nb{cpVz8Jy7QL|45u;P` z($KBOkO#DK6MV+_2W*&|`AZxLfrQL4@p%M>3yq$~E%sVs(#D|6@^>&ZFbo?bGM^89 z@w!jC)67{zA%MbSB1bsNW;O zC}Z4NzHS{LNd#*aCQ214hY^{cd?F&EvT}0rsBFS?VtedL$x0oVGXj|8sO+@&}Yg_Lw$ASflvps<1 z9+NA!3}gV}AM}bt-|F!$W)4UXMQVMi{IS`dlraQ}>W)m69BAJTodUnJ4^0a3Vl`ebL-1Ov$y>8;fY2jYrd4QIbW&cx)z zm={FRC<5|L68<%WFI|7K6b98&*P~W8s$9`OB%F;5JJT>(1FOX1$wa(#4~vQ!5-B7n z42X|#5+OqHBlR~W&n*tE@(J`TL>49fFyj4h`PI*NHF&#Lct1aiV5q@)s23u;B!bbP zniJ+ulTFKKT2FozvSqosHiw+Ke2_8^7~9UABX-m9O?Ipv_VG>6*w|44`Q7R zHXtrZ{cDn$?P=;JuHZw|q~yqcuH?u812AwAyE!%dL6@okzR6vnLI%r{j0gF}$wwlr z#0FiQMn*E2`6EJ1!W&^@$ykz7}g1zJh-8U&8WK~npJ9H0waJ#~^wrTXg;B~F+C z%Nk-G^WVMmQqnRp%jaW3spChwMVKY3n(jd(;@N8EG8X@${s0?YyPdH6_Qhh!c@QD*qL|hUU zZ1RjpRX?gm^^X-N+wuqIND~O8zWXFWb)TxHqpvoT3<8T};#D1xOl0{<0n~iy41}}T zf?~coD>GFrg__aw#i_JvFn@`M_EL)H%P*;agGKE~BnEYoRtVJi8-+=~_<_E;2@ib*i+C1nKac-pq?iH5!al@6TiX;<|Hy0~)0u{CfJ+_|0%aDz0vDb1RZaigCr zh#(?OlruIqelXfs7g2-6M)vDH5VIOCgd5<_C1ZfJK_n?305RGB7*i@(vA#+}2*38K zMy90pzM4;@jxB+U>Q2Vgq60wnc4wno>T#2)nvp44g#W|@2!DzUjGkxaa8ag;V~!@G zM;ggHbQVx*pdz(x+LY=~`eKl>v1HaRU+S7kQ+SdH7?u2*^!Z|&q2eGSGdr1NIWxQ3 zN7T=V@d;2V7#UU&gcuksv+=))9g8?bL+n+CxIqUi8oX*fB#Z)vEWs*-nF=!lW)=*I zfV<@=1q?ZXq7Y^(%nX=WFqDkM{Pz#b@p45#U|^6^rPgS5I=#VYG?~n1i^XcQ*@Htu z>(mXaSHD5SMvWRj*Q9B)<}F&Hr`o1%yY?MAcIw6`<*%S<}YNi z0G6lZ$X@{N!3aVgRg{|2P+Cey=_vzcq)e2VvQSoBC2FUFsSqlZszcSK!l-&weX0S~ zkZMFVrk67@3m3N;MpN~cp9)T>k$g$^f`M|r5x)a%q6p#Bu< zO{xf#pH00>&80q|7Em8ipHQDuUr|e_Z>g2kYU)R7164|GqjpkzsQuI->L_)RI!paQ zU7@a1cd3U|CB@JRT1D$=3mrm3<^G?a6y^sND#vPX zulJtc_4-r4wbJXidLQ_$k88MAfx^2w+T-dZYC@=dS{3mTEIx34s5Kz{JL}PEkF!s1 z0(&v?l}9%pJ@utt4efL_4%ePm+pBZ&usUotSmeV0K^DCJ%~PFCKS^tcs!psLR;>`A zgYUu0xvJ;y6RYyA{a*LjAMwg#+^Zrzk00L#ZqipZl2@y(kDpc(q8iD{YHQ6@s-S|% zHLNv5`0dsHey9I47OeEGdLC7h72V?Vpz@)gz|}S2UbXc}Wi^9V`U~+vb+Ld?tAKeQ z`)zlttsrDo!rsUJ#Gce}t@ii&Q}8~lVtNv}MhHIyf3fRjDe{IYM zxgV@@Ojt6iRaElw$k_==1ELoU@6t7J>9Gwu)dzWY-DfSfm;%2YYfac<@7cnU^mgyS z#!C;qUEjW>RcFJDMfHB|-OH%R%iE_6IM=^P&?`R-4AnM#bItQb!`!caF(-O`+T?{f zVSN)K(!WaW)3eEy!loSqzPnjsSB&V>-2QINmu)QzosBaWweL_jzc3?S8GO_`SSKGW z^lp*YUbD{9x~V$*hczbM=7^TI^lcj~dh?JW@4erwRm-h=ny0KONNU_*RgdR7?ig%0 zH7{S#d+PfoCxy3b)4tT*;N!zN&$r6yKBw+C$1j-lIk~UJC9U!{9+TIk8NK!H z{y^KvAn*ImZE4dcT>8N^EPb+l zJKfj&H(6{0X4Y-EH2BNLE&gx~?z(tDzP;P3Ufo{!zT1~WW9Bz$V)D%1U;nw~tu@*; z^-s5Lxu%t_-Wqtb?xbtv42#JRDYO*sX~G2Lx8J1aPY-Sskl!uNVQQVx zxy7-7P8}zobG#6>r%6+bJ-kzR?pm&C<1Y`@sc)b5fhRER&F2gqPulaaGQVzs^NLJE zkBaFVrfk2-yQq2lA$1$L(vv!`OX^~>y)mrWkc^~)KpK?zgKaxLGJh)%W_b(rX|JCz!My2<{aWT{e9F>0lke7VCI^q12-}igHu+qaG zc(0xlt*fV9t2}wdJ0Gt7-rRM6`}bm4`p1Xf+azRR;oA4_d#|1mt#R2$yjL%ZR@(j8 zds7Oqr1<8Os}kHso~^epK++%xjWdz&N&)sRdgQ$(#wtu7e#v`qsRZGJC*B)UfR)p4 zd#{`oT@xl9^lm;Q1)wEgeB7(H`rQf(w>S9nbm{s}7rnEf=aiP)PkyuF#KI>hX`%JI z`{sUi@>B2WLVE5^@5wVFI%`X=JUw;7TLxhLQ&->b z=XUQd1hBmL*{vn(?_)7$A-&_C_llI{$nS1?FX4(w1ZXjN=hHo#L@Pb@`s3sKyyM8e7tz_- z{y$c04u!_%Wg%-!qZ$m>g@S^vs6nJiRxzXo* z@e2#@Z}MAj6#A|7n`rr@Bo6gN%O+Vn5A_F-9R9=aF6*I+bsJACy0P3lq45vpi`QOQ z=3QUdqt(pg^S-;W#CxQW&b|1kY~%fp0sPC67oHqE>|F+M&&7RO{>}Gyzk@5?;l#b| zWe-olI=;`w+iOZ6orKled-C!5OK$%_0{n3H;qe<{vCMt{+>;}Fyo8xUvXf%nKESPBcjUViUM#U4Z|ENtyL z>^=CKXr;$qefrz)qP1k;p(i_ci50S0!lE0W{wOg_HBs+WTd!4HiNFwtX?T;dA`e5x zdz{ZszW<%Uwxhp3G^^lb3?HCW1PFrf#@BY6{pU7VCoPth`l<+S3kRUEZa*iIz=HG%)E znYI7M^{f5Ig1R;T&_%BGh=pC_2gA}@f4!*Mf6Oxv`^-}dI6i8C7Ol0RQvtQ1_oAKw z&pZR3{r@}sXX){5exA**#Ff>*&(h}~c(p0`EPbA(=l?3bo`v^c#eX*Zv*}k(Ztm`F zy5Fn4_%IIXeZJTH56Sc6M&q*HXJ0p7>$U4v%xgG5XcMaVzj+FKsm|=`1y9GA`9_C4 zw~^!frR^Q~bg0hsf!jdGz~MvT?sm|>Wx+4sF){FU_!l}R{xTWv(;WQu>5lGkGaV;O zW;vFuddtC;zU^SvzKghX9Q3R2I|7@0;5c^ZL&sdt0!J@yp`&cZM~J`3@$HCD0OM1K zxxwdv^M&KcsxJZSD+gPDG2kt6=w4e2nBO?=efBNjE_1jxEC=irjK z%_iVb>KGon8F*}VD8_C9E?XVzc5MYd+Z;iL?Z9cfWBh)L z1^Vm)j=OO`-7moN7sqdE9$nQy%+ezg4q{G=0%&u=u_W{l(B}`w{?b1{ql=C;sTV<~i;isO5@>bF!F+NF^t$Aj*1a4wD|axz zmxFGX9WzE=2JJ388ZcKtzblT@?_U88uQ+xzsQ?`-9GBNtfR?xI}oI^ur5i?X@vP`15?^10_&@##I3(LF~m!+n&~eaFv}@1v~l zJKEj6kMerp_~hjWD69y%T_dWiDFciijUQG?#`u z1DlL-_UN?GiTdHxbid#%KEp-?cD6=v#ugFIEJs9-PDv4mGhdBB{g3GVaAt(O&ifIE zM|=`deCC^ocCW8R*sT$xP5Ti3M8r#N%Ms^J#EuloRd)gJ`s%FGRnfuVDx70;QB;^K zXmn#&?}sg1ue{mbC9l)fb#tS`b$CQ?S3$jguHrKTU8lZ&(bewtVXnl1nXbUjxvs|b zN4rLwCb%+YOm@iv-*ky4ie0GHogmlBQvpHr^2 zf1U+Sf4COUxeUDibmd3h1a5a-hrADf-xH(-wd6pV&?%Y~Y(03v++HCxZ5AlR*H;SD zg4IHqNh=t1dcmzS3O@y!1w(*U$WYjY9~B{jEU=Ccp$rp7Y3d6L3=M^4*2coJI!%NR z8Z{F#Tec9wI<*qk_i7__>eEhmC#i$5Bc+pYJiCjqeSBA8Msatc?t-2|(Nc%7^`{77 z@2`UJ)!8Va@7-u&Z9re)dYw3-qC>p!ZQuSvyVOKs?6@SMaL!;MYT5I`&K)lb@(V)+ zih4y@88S?;cTE$z3`rM)MrR0bzyGSRy6B6Lx$uN4URku8{NF`$DU0^Mp={ z4~41q=YyULgu8?PC7AOU3U9pik$AW$PA|d|VC&G@(PeI?$g=t;B5XzFi6k_wg z5)AKrEd(!LEV%b95pGm01--u&%9<_{3^B`vk1|#W88cQ2uYLWU@Z*kELa)o;gZ@7V zZ1XijMC@AO=aD}Oqh_xYUR}9fSa9$sL4I!o%44JOPPa|MvX@H*e)4AFgD9u{WwJtBnXA4U0LNB9;TSyORBP#RAOTf3hYmb=dgd*3=M)LVNF<#}F6 z4*Emr+wr21k$g#5TU0J|`~I?U{nQoVw}7iC-#>*8uUr$pExs-cS#v{ZcmAf(Q*&Dw z+wG3<$MCx-?|VXQ>3t#U+5;gs_>r(P`mxY|)DuDe`BUM~{gpy>Pw>BIBhrJ6w}_UE z=+_)DU@B;bC}@Wu9bl%y%zz>KwoNcwVRpd$0z)1a#sMS1RKcl=Pdzgps|(##%|EZa z_FwJM%dDBTM=#_0)f~GJyMlV)t!)%=tNvT8uvXME7)ULyVakn*6*Y|!1Fo7zjuBYR zzuKY8jb~cXR88|tYKksp6jjqeUP31CfZTl_2J7BFp8n~wh&O!eg0&9f_Sfe|uO5Mi zKg;cLh4k<6+~~FCZj+a0Z~mj#D>0p)v#2<~9?jjaYcso6A)}Z8U2yYm@#%wlwhA)_ z@~k|_RIhcf!I>{ab!Zf#S1UD!(8e8mznGmmAfio!I##o-Zo{^&#I*dZmt!66S~RKO zv}Jo|T=K|KuMK}GLFnG4Q+SWa{zEhJMtgEzO&Kzrj-TCDEvL3 z@6gxia{4@dl0Hfwr1#Lf=&kf7dOiIE{T;oO{+j-b{+OOmzfZqM&!%V6Z_4?=rFo29ZXwk6Ev4v zT1f}eyl>q7n0f%s<}K<5^(VBP<UZiOwGW!m-Oz__N6p!U%kqAr z)>CVsDP2Xapq5ih@%J_L1@#%Vi29iN7d0PR)%U46(67Ety+svMGpXs+H0WIm@%IKb zjv5PHYykyTJ(UCP>DGKzsWV^&<5=w7G+*MCf%Bs5sQ(K2!|Vn~J1d z(EK_ue(ynbgEqJ`^uisWA#Mw8aVzMJn?r-#1iIvg&??uX!k}dig}&Ja&9fOgXals- zTIi)!kP?9yw96?TwT~eaCa}}+;Y8o|aFa{}ysOPYK={w*J^26kO(LC0{a-eO6o2>l zxMT(Ws%(_(IQY6y)}5Kge9t^(;@J1uZLFHpvpv`s**Dqm*puvIwlNpZrE!zFZ@Hr! z%h%`Qc#6|-jkpe6KW-?O51(b+2JRqtj(frd@%8vNypvDh)A<5^HvbX-J->y&&R6nA zc>{S5d8~Yx{5APTejEQQ{~Ldr|AW8A-{BQFgH z8pJ5oN~1DV*+AJ{8KLZ}?5})DIZQc1`I>T?vRFAsIbZpOa;frrsphE`s#dDjs5Ys#tM;o7tInt{ zs;D47NE2iV3JYo+)HA*gYIHE3a`{CP0AL^cFJx_r!rPKK>4CFMOmO6r<|&sshq1^p!{69M7c$|Q+Ysn zM0s9$S$RwOK&e#eRl%xysurqts%|Q$>PO{9;ycsz#|Ms-~$vRDG=aTD45|qiUmShw4|=AF2w~9n~Whrw&pZ)pm6& zbq941wM*SkJy1PVovI$Mo~$lbzoY(_`cw5%^-A?N^=|cV>SO9Z)D`MG>PPC9>h|jH z>Iik5I#KabGmlAE;^^Kx9&wwV7Iv z_H|IENV`b;rFOY?wRRIIvlo=Pti7&%psmyf=ro{A9bIQ#4_%ZlRySBTRF|&H(iQ67 z)Xmn-)h*I}3CgV2m20nQ?`xlG6*{%fq6^ivMGOaG^hba+BD`Zx4b^t1Hu>X+(Q z>euNv>38e*>yPQr=8W@@yKGA=rU!ng&U#c(D@6-RTzoNgPf2jBB z0}Wb(%~03S#n98x+Yo0MVtCmw+%VEG$uQmUw&8ulCx)*KD-1sv_81NtP8iM^{xsY+ zJTb_OW@Cu4k+He4ld-!o(%9FSW_;C{Zyal!YMg0&&-kJ7TjMI@PsYv0J;sB^6UKAK zCpwuvNUzg}=)Yxh^?mgN^)Kk%`Vo4M{&oF(`VaM=>c7^n(*LO6tlyzOp+Bdu z(BITQ(aQ`$2A!dap_QStp@$*b(9bZ~Fx2pxVYH#p@TTD%!#u+x!|tDOSZ~;B*kw3mIBvLLxMHX@utt^9V60^eWu?{XHAz(H%#|TO--#$T}(Yq zF{XIa5Yx-1Jj9rU81Ev+Cy24hwB5AVbjWnZbkTI(bk`JM)|jp4I_9S4*5)qep5`R; zi{>=*tL6gpIP+BVO!G(P&&}VOSDAk{Z#C~RA2eSz-!eZo(-x&gZwa>4vvjm{vj~C zzP2p0Y_{yM?6(}YoU@c$Zd&eJ)K;T4)Y`z>%G$x&!|JjQwhpzXTeGaAt#4T0w9c}A zVO?td-n!1Z&AQwAoAsFWn)QzLsg<#*ZAM$Dt%2>I`u|V;|EK={zgz#;7&jQV8-Fn# zHl8$IG+xD`V&0@NnM`4(#*mC1P5n#*O+!torfieP^oD7QX`X4J=}Xf$rZuJwkc_{W z&YLcqZkZmK7;}JG56RfV+|Jz1>@>%k2S75Wm|r&+nv2Y{&GXHR%!|#-&0EYn%?Hd! z%;(LQAsHW-bIqg76V21iZ=2sYe{BB3{G)lJd58H|^HK9@NXBbsxkY6$TS6?)Sz1~; zS-M*iEQ2h`7PlqWG76G$n&n@XPc2I=D=j}kGVX?C{KHaVxnp@`;jBTBjCN~#Yq&MS z8f{IqK5rdn&9IKQPPP_X-?9G7`Y9yiO6vv770YeQLknvSv>L27YfHrFju>%>@e*Q; zvre+kw7zX!VEx3p#Ja+|)w;`i(0bH*!Ft7d+xpO|wPAk5*2vbz*2&h(7HNClmTb$g zW!uKuCfa7$-m-mV`_}e@?I&BAZIA7D+X>qZ+dZ4t#@V%Yv%Rjpk$s`r~L2zO4o58b#=LRnh zULL$Q_~+oA!Fz*`1fL3iV6C*uZ7Q49R>$_7t)upQ04YH-!hTC#&qinNnb8R2l zKDRBmt+xGa+iE*vJ7v3M`_uNoR%w&lRrZGVX7={>aJyjdV^6d{Zy#yTw~x0^wwKu7 zv;WKfseQe@)V|BU&wku~)_%o)!_Ec=1{;EH!3~3(1-B0l4_;|sW8Y-oZr^V|Y(Hba zXn%yI>;b`=V0&;_aMR${!O_9}f(Hi=4bBM84jvu+M({hq^MV%ze;K?ocunx8;O)UD zgU<(F4ZaopG?)odhUh~YhqMUk7}6~yDkL@}DdfcvPsr;bQ$mVD=7h`-`7C5{$cB(D zA-{wi2ss&YKICf1t&m0`%|kkbbPb6N=^HXID??HbxYba3b^q3NNog^ms_41F_ne(0jm#i7eX*M)8h z-5I(!v^?}$=>5>Ap^7@{I+i-2b=ubHT*px-s!snpkEsFNTk=MVzs(g(*jxq zyhnd6JI`I`l!`<09rD-ZQ{~(E6gq|7!wi=z6_5Gp{8jD*M(#3ZAk&f`BYTaz!`GF+ zEpNweW-IA??0W7wE}rqSl)ROq3me0g)6KZ|nMS;k%V*5;Bm4>e6t|c@!-UAMaP8$Y z0v0nB{8V`+JAyvLUS_|OzpLmUP>=tS`B?7c56UjH$^2Gk3v+?{gb$N{ESt%Vld0K8 z{HIJ2KMivY^Z3c!pRz5qTju1x?Q)ZZKFtdTt@dkyB|C;Z@ z=oPzIC$ou}!L?_evWfgju0MZQ_7Phq+sa&EbC^%KhVlzs8sC*aB^xSxB0D8p$sgpu zW`pH1T#|f9z%XVK<`)O?R>eH-6?p_#qPW0MV-lGixS{N_;tg&$@-bae93W#%>{_N1 z+mri>{TKHfYvImg9;YXJSoSXKVfwST*|7*4&aGi)vWc>NTo$)cR>=?I0u(>-X4x_3 zA-hGsQ@Mwu*wI{Tei*YJIIfYclmE87g zoSS21M`aH7InK=wQ>F2b*~gewn!qe)UQql-f6X6Mm=x#vTbOwoDx=wh>~Q8?_7Z=H zJHaKeSJ?BiuFM*CB0H7q$Jn?p1Me~Q_*SxT@YN_zt1|MNSvCI)o6USnuVI|5RgNY_ zW8`--VSGb*K2ypZ;c4b4PA{*gXcpj>>A42XMCK)KlFY(=!@tje&fB>Fb`5=-y~j4^ zw=j#@^?WJ6jNK_Ol^v3C>?HOBHl7WY*X1kN#^BQznflBh>@UoB>_l!7e}kLJPe7Sp zWJfb0Y;WGdMRF<31n@x^X3ti$-DL{U=^^J}-{<6T%l~YEP{10F?=i=%ewf-Oh2|i(lE(SaG$d#W(j+cn<&qeb>xQ0IZ1OqaT?}% zW}_@cQOvbsynG!lhW|+M2UE^WVy(;`b|$Nr&*YXd2ftuSx5(aOWbAnEBX$v+$jsr!1{gred}ak_X1cOH*`rK1_80DVb_V;Hc5;UlyD=Nt zL0uv{%U@S~!8DaEW`9QQ3BsR~31R{j*V#(hW440Rup1aX&trBpfGd^VriXDyxJ<6A zysO;EeiBf@?UOZ?eaakQLKQ3IJGqtIL)jPdt^q&DUSW!uwfviW50OBHTQ%Wzz^UPF{>=&5@fge5_vA4 z8n8-s3Z)Rrm9fX!iA*@Qov8xy!OMgv@~ptd_Bp`9|^u%o;kMje{hepq?yW&1%_V`9tm?^A&TK zjfZsMQHQ)-H%7^_vSFx0gIHe9%a^h96mouttQCC(@h8jX$>uQ`%sglk$#bLEII>VH zBF-V|(F_&|gs-{QfD(5B#w@<{R>w&}WqyeX=oLwwcz z!D>$)n-qP|UzWU*gAB+5eF7~2h6EsMX9;357$Xc>1dE#?MBOZpHw#1jsuUJDtWi9s zvF0g_OKu*B8>YR`OWGiRP0HWvQ+tWa(Ux8JxnGplt=;bJ0609q`t*|zrFY>)>Ai?` zh~Ar?NZ*b?$I4I4%?|#0pttB=<40$*g{trqfFBM&5lJ^IS|sZ>NkJOoJu3p2K*5mb zdB>h#$aB?~ZlUx(ljB=QSK(VnchtAO?qJn>qh+XPf28HljS`&lUP3dVMLkjmdzt8BmpAGTK|KdZ{>HY%#U%Bbir>???5v=@0neNj!E?K$cqRRNv!9dXaCjFv-Zt%v@)4&4wM?Y4Ahx(D>!eW3FmM88B2gC;zW z9!F22i|BXg59vkFo3Eg8#5sgTArTl5DuqO_{LMqWtJZxuU>9Jj)_)YjJ{4vL%ztP7 zNF7kwfR*pTptug@V8E{usRhBVfDT%Gh#(^Z%_of|N9ngQ%EyQj48zW89i*dCgu;p% zY?ed<2o^>Gql9t52r$twu`q=&Q(?qo5&=>?DX~TZ&#wRd%lAL~oBr9~^w0jL|7Z6% zVT0j+e*QV%;Ggpiy#JhUAXSoo&Nukye1m_^H~8m#ga6a#8|-jab?IyN^T}CV#JzQu zC*FUz|F(v=IHy8}BIKzWj*#IAv6HzOG8a=9hDgz*xC0A2*}B7heGya?b$051ZN z``vJzAq)c}hta^)h3N$|5e5PN!z0HmDW0lrhtF
Haae{WMkbu2ND$OcwDOZolS zXFu)xo{cwgTkdn;i#PGR4l@yEIt&Rj4~B&M3WkJT1G5pP42Hxx3`62wf+2D5!;tt> zUC9FeHuLFeIIWFeEM9i72Lb9&eIn z1q?~|HVjGoF$_t65)8p%8Vtds2!`N7?w=<3yaPjUnhQhl`VfZTwh)Hk_X!Na@e3G& z=VBOwE4e6(;JXrr;Jg}!;Qb>E!F>Y^!M_xS+8r1q(m^=7VDJ6o~51F2%5Eo^`j94VVe!&cOwY0yX|+ZEX@XCv-A?g`t>=ld(P?HsqUKey#M(= z9^Z#cSJkWTd7g8B)vfB9PSv~b{p*8|KK}QAKKt(%Uw-|~x8MK%|LgH@derm@_Ug82 zpl9tSq2Ap$+jHcAf4_ggHiuHvP%7wpWPsEF`p~Tgx^Kh@Ys@7tPpU<>eJH_>CK%}3 zyCzT{2nEt~a~Bg7KJ{mXXvy2y>O(!1|XXF{>9=zhmG zCY0L7n8dbZLocPv3^u{!?o_fNCYaij9PLAT9}~#zL(dN0-_#cNr@Ph%n_%K#vOR*P zJG#-6{-p`zerZDaUs2vsCQvwvVjXP)(eWl!7*BV{r<$7dG!raNGl6h3?Q0?b^G$8~ zQu28P#ksE8d z{p9N}l)uD;l1nJw116Mxzyy;Inm}Z!3FenlogStpe3aIYnqcfP;+`}$$(%8f=V>1u z5V03cAWv`h%e`ZQh4-m`A5$zE-0^kf>uXa>133`;fyzpAS|k*xNrnP}Y)v2->lO%v zdjx7DJp(o2UV++NuRtigX~3kn2n2F<0TY`YsEM8x2*l0~1dC?}0`YSwZ!zU94utae z1WfYYKy54=sL5ml!TkM!K;|!jV0sC4@dJTi_`yJJ;z8>2rGY@=;Xo*n3)E(o2Lk!! zRwd*a8AU}}wZoxoi_n?XG8LZ9i9W=!Q$nL;k$o!ma zjtkc0jtiRb@xf5~#9%OfGBJr@O}d`AX~9rrdN2@f4VqkAFc3W>Xd<(Mf#mF9FgKh0 zof8bieoG_y_rYNH_oUAY1`_85O>}NB5T8r77f}8Mb9WC z-W?1S?+%)DE*OeGMRA@En#4bYwb_5tzBR!>ZVko#I2ek25;Xa5gTcsmtE3N7olMG z5aMGYlNlKbU%8nQ%tKg#wA=_#nmKX^;YEjW>Z= z;Xt@g_a1o5FXjNu3q1z$v(~74In`ie)9?ks8aUXbTg@i4n$vxLw@Yg;tGPV1F@K8& zv%hXSM{LC35b{2eKB*zh{hYRK@^Z2p_PFnx7W)HbzkOJzTW-gG32kS@es4efnp(=4 z6N3NMjy=woHu;oiW9_kCMe=`(LX z=9Xi^M=Im+7rhPr32qsEB0pztE4|1pngOk<8)R z&ZaVsj~~QYO!kp+Y(L$1JeBvyYT_ovnY&)Xl#kyHaq7tTatfy#u67D z&v7PofumE3nKXg96i2ISoIOTdM!3^_Ij&co*?6zShcB& z_ObKpM6Ty?U1*=jD8SNVm^-2i+&bd&$1*pEOIe{^ds5CEnI(Ci96~V$9mm}8D(5@2 zV*_!qlbG{uM>!v$9j|iizw1K1R*-FvlR3`izV#{}pEWdI62f(*{SPK?UV`II?Ls-* ziObb9XTLC@tW}JY#l)>Vg}L*(P`}m0MJF@2whQGPK&ON?4a^Bf%3r1+cUS8v(x=Lh2o$MZb#lcqMYX(R3K=dUzBOyznG6nAC)DEkqAEPa-XeQ)3P z?06mqhxsAX#BqGjJD&CghxuXoY0UlCH(tl%VPo~3)y)3%bmmuIv=8b#N$k~cXZGii z{b;e@m9}m2_K)m_|HbrCd;03jsT2EEWHC(q?^1<*A8IqT$2}RFy#B4`>)3>rpS|pdf6Rvq#2(rvZ~0|6#tY_JwZB95m-UzZ zn$q#QbSNE5;Tc?yT3lWudE-MOQPI7p$6c zHV_xPhPh9=z~T5=FWhOUK2llz%E#Ml#6@r8c=s?>fh)gW>O*5}k#Lv#j<@oDI1ILn zINpvF+orN|cH}Tl&mnHTaCjG+O=TR2Q+#k{;dI-ZXZ2iFtHJGp%L-KtIA zIICK=L{4Sp>qGlHUhmH(+j&oLJp3)erZR3*+TC%!e2lp0lg!;DSa~@&jKj5LpAq}+ zzU3=FE(g*$oR#A^Io~+t+=;}Qr@GEvMclmq1Gj>>@Y7w7hpBzR|A9N0xX3dc@5nB+ zXFGAjmN9pMZ+rHloDJuH9AArxOAAMTdf?<8C$by%tH?gp1^Yg9PDysb{$R3Cbiuxv z?Bim;t(3EDyvqKK%}ayC&mccPwq53I^uBIb{M_Z+f7FOhKVTl3NS}Gna{pn@v&q{J zHRb22`DB<8?hwJs>hHPEKtC>{&m!TT^y6ed%D0X_!=B^vwffmth=c2dlyEs;4h_ZE z;V05&_<4?Vrk}m+M?L0~eM0Q3xzC9CE!_os%x^idpHfA624H?#&gG{+m2oQTM{+9l z9ZU8pvA@;NUiPEDxK1!Hu>U1~_A*XkkL!eV7wlJ&edI;<|9e0GvLF8Y&`?f_{R4jX zPI)lDnU~oAS$_7iAO4%kJ}&lWRAGNT*=NMQn)0t8`=Zz%RE7WVQ2rHM{y$Y=KLqoi z*l%on;y62z>@#BDfMJ4EHhwyO&jEK8aV!7I_QeyBV>N%Hnmr{y{u^ zWtt`2r537=JD9knM!b&h>g74`$^yL*qw0dm_x=7Ve$f7hIri;U z_-`lsNm3r)zq^W`I$8UD|BSBWdePA4!n_u7DE_S9LP@1tXhTU2CjPrv%qpx_(6k0Rb&;xb<__p>VN1rFDFi~h&luYKbo zW5f3$aO;T6f6v@ebPlkotbWMY@O>NYIE4CiO_1NTH;jDPF;=mgYU87?#$u0DK>dI*^M~M$UfPF?MKM|^8W4E?sa14cl@Y7y&Y8MPk5Af zEPdhfbk^LLXKWS{AR{dZ)a7W;#%C=bTH`v04sz3mVAen<8(>8}T? zu%A!%d9g3}*~@;k=VN4_>dE8%S5?@rMft@(vk`k7PXp*!4fkUIJ*cg0@{TvpaSINA zS6w6ATEWW3QHA+$K5?1e9PiJ*T*vvy9{0rc@59_Sv~5#aIqh-Z;eI2&-$XZKuE}@) z>-c>D?LL&w9kc3~yHLWF)lc@rzJcsliv7lZH-`G)`_1Sr+5dagXEv49r(?Om+3z>~ znQKKhQW;l%pAlU+dKc#I(TQs#TpfG&{oU1~J=x#xou4;LzaK>TC({KsE8S4S}lzhQ2O?{QepjU{enJ#%|?ftyQQzJWRVsVt|maa$e_^X8gU znLD-%+&bdI)0kV@1rBYoU?!7K>hY=TU?K*c3am$6nzX!3YiuPPWT)K_pz1anBEpfxznXC4EhIxM= z&8tP>s=2>Ak?dnLInMch<&*vJKbPz?Vt=QfJ)fU_@8iSI0Q&SegX8M-Qg+@D|F9oR zpEVM9WA=XM35}Z-Kf}boUtF9Y5H~0GEA@iBtl!JeZ*z&8dM?*5)<*(W!97N%$xE5* zO1yQ%^}n`j@z5SaXx@$7#@xu4)_C&$Ur zwoPSmHrNlO&79aj=VvebQJ#rppSX+t`(B^hcwC;jWS{DS{SvazbisZ#$}jd)t0+It z=jLuMe;;CPvgLLE9SAb!gwSt?k$pkzN3wN=ezWJ}()WCD=McAEIRESZ^6|BVxa49k z-`dXOm9B5lFZdob=pN>Le@83+P(FMQnshJQf36c=Sv!!C=l%-52SpxW&c0w5KFhfB z_Q3a`Ne?mi91ahpjc|7S6IXnUxt*9Q=VU+Xwa&5swV%D`J{q_obUy6=ILDdU1rFbX z62e_jC08eQe)nfG;!nG!teu44n4hWQ=PAE($$r#-EPZ-B!S#Q~&)(B+=pUSivckRW zcRYzd*e{_^BFAy6xsSS<>@!cZ{draRuY=7pw)g$_8)Sln@*GC?8L{{MeXq4<`*yO= zKg<5Bv0sStJkRzaY$JKcJ@2*Ud5vreVtnI> z9;^L-CxLde=i?RZr`bBG{4UzS6?^|6O!L9E`7=*gp?< zNM-fwcs+$UYw0uT4X)3zV35ieR5Sro1-zrR~Y+@iG{&-dSd z$#p*B45Yd&75mS9$8E=U1$QEGsn0kL<`SFA>V*sMj(@kfinw7#=5WupGFKkY-mm>H zbARZ{{VJ+cj~|(Pu*NT5$LobUG4nf*%nJQr9|<(tul&MeoMGH7s$u&TvcIhVWxros zv^U0Uw3hw&x0^lAOV=+O^Ox$z{(j?E5B^;T}L#a+{{txkR-!0mQ%Q>B5+f;TubR1_G9}9__D%?qe z`Hc^>2hL*)#J+*HZ7Pe?u^kbo54CxI6D}Xx)Fv+{yJ3GY*(Wz;d*6R|CiW;-GyIGF zC9=P)9u?-tg~ScojN=?c+ctU2<>64iRb(6O%iO(w?I7-K{ptEOyE)tY{<}i4M|}<^ z`}`Jce^Zs^suSKjZ@?dp-^f<%Z>Fz5dmilYeP<$ZQ~NXbonJjY?Spvp=@Z|EIsfCW ze4fSF=&>Dh+xnKXd>rF=D{jx+6|`-Ww;yFU%7^1_8c5#u@cjD#vF@c>SVM1&8m& z$$gnSlg6%1Wn9O8Lp*#hUb;VX-&9%7I&tqe&Zqu@{T(KD<@L7xTK2qxlyIZE&_5XG z3l8CUt9;|3K|21P0pmP&D0BY*ZmRru;TY$OhBLRhZ#nsT7V{3q`GOJE+n-4G^G340 z|M%q${^yhZO0oZ~UwNn;Na*j!$Y#*t?0<>fON+8`QruL1EMEa!S%zY!pD66;Zhy7go#E)kCg;m(2E%RcJ zx!xvkJ!Loiucl9~3-)zr|1Q`cM)n!8|J1LYobt4jO=1Gqcd_j6tbG=eeL?K^+lc*8 z%Evrf6#JX~%HuhYp`9>~PCbUpHF_g)V2|sTd1Bv}wr%q12b2rfEwhee|3xt`tGB0I z;Beg%oy6RaRdOgFu3Od%H_eZe{kHxzbqzb7dgKevRD6o#ZPDUi^(P?{zv%PZ{+V$=m*qmwD>ub+SVp-e|!25^_xha z^a+NjV<^`EvYmGl zbN32XRxaoJ{#df_@f)^(#Mi##e2ntVB`z)8GT-ubyq-k)?D;0a@wWAgC;Jg+E&1** z_FaiHkorDb&v7>P`!d9tNcI`A?@FBc#0{HVeVoV0evsIACC)nHat$13%PQJ!Ak7n5 zvG*T89s39Ea3bcHDIBLO+*QQoPVG9kg1FI5UFT|Q==^#ba}VM22dM@F(f#{UdHwM3 z<|ZYXn@Za@m2u_wsoKdl-OgMM^+jc_xZ-@~UYBs??Oq-a zzsXu~DRWy_+3t1X-+Nw1IdJ})dIkHtwF~2BB5{QU%-t{k%gav(tMk1H{W70EQ?F%i zxF09`VgDF?=5@h-E!i&;`yIqjS-E7ttv?-O3&j2$-{Y;kA10D*;X1BI#JAnbIegz* zelv4Bpm~t07-!3f%PwS&o{q_>jO%#Zpnl(x?Y!HVJGcuR{vMUSowkFh^7`Yw_WSNw+E)9o zWq+By=lT%sK9@d4iR1tG?vBR?IE?rHPjdNY_aTAgEuSae#@c=KOYHBcF7*FI3Y%EL z+}l--Q?&1V`t-<4JleLYto)c@{r`@Mc0fOc#SgvHnNyjcj^hvUQSRldIsUJ>P!p*dB=2 zK(>?q%UrU`cy(Nxvf~)-i+-84j{V`P$0l#RWjE}{(q~c^?9Upw&+wW@jR_;&s zqr7A3GwBDmUr>cT+HbkoKUIajZNDGc|NJWK(SFOt{$Ewtqy6ULN&b|YH)4nD_B0DaWoCBFV}KyA1$JcQIl`plDZ_?};6 zd~Ga#Qv7t~@9Ky@td`pW_vURXYrl@;73D_X=eje8y4&RCWH;;|qfb`sG3(gmV~_S+ zOP{pZf9%_@<>eYkwxfGiUoKpi4HNrn$~Bkl`-}ZkT`1RMWSi|(eYw_>eMamzRxZDB zfp$mVOcg)-)3#0Cc6a8xv1Bky>j^W{3uXLVxd{obhKups_6 zHqRkG#-ZBZQe}K_xIUY-Ik(R#UEt78Y2nW60*7{5Bis^S4qx~>-Ved`S#k?5r~kO= zTKg8o-*~@r$bR$(+BZ_i@i%5)C!Alu4ii8A?akNk=pV$LCHB{g-}3R;@w^KT{aO&t z|9Ac!+ZpvlzmDFL>p6|KZ7Ms?xO}i*OP_gSe<)jbI{yuzeq12-gZ=DfKm3n%?Bjm+ z&h_LuWWQAWf8=Xle*7-M_}Yr=UG4LcZT*Rx*N?g5eB*8C&jCRypV<4)FCF^@{fYbG z;r<-wLf<&$;{f-=rwVs8mDQ%Q{_GgfZ~USh1L!krYc9wAdedp6>v~ZK)1IZhY_wwJ*X?vE~zurSKy!M{ob!@D@J$B)8r>p!PDp5^g3FafZ zPx=b4V=wYr^UKy}bAB&b*U5T&Sr3x+zOp`8)}v${m-Vk@-5~23vYsXD^JG0=)>q3q zBkQ|ly+qbe$a=Y~Uy=1HS$`;NZ+#9tm+NzotYfksCF}5eLcGN5g6P-^)>&DH|HeA; zS6=5uhx4q{r60Vr)@8K7TLtl-75_QepL>_{4<8}N(UPmtCb@*aln@f0Il(pLX+4%_3XvdC5;d#}@RSC!31%xt#e+c^$`1TuPBBuXB6xIxqWk z`?HS8+8Y0~_^AbcYJs0x;HMV&sRe#&fuCC7rxy6B1%7IQ|6jI1-yO|_k%|5zely~@ z;l~Y6YuIXlylUG|cHyOVqcuHMX{&+}b{acAq}X?mOkI#?}_dn3dBTr%z7KhF9zx?Flrc zzNs1ePD7!%^XQpV zrcAG&VZPe=u*TD8*3W2fI;(MP;~9<3ZD!@bqdV^SZntUXyg_Em!_2pVxVgUD_(t<= zx5Lf%-Nu;bx=%2d_8w`z>U{)t(G7jZHJ)ky*JrFrZF2lE$Bsdp-?ioNhSO$h1EopAq+=M2Zn}f}b)J<>nnNmNq zxm~&Lg8*=Cjp8yd|=JwqlzkVzsD($i%$U-2s#)0o$j0d{ zt+Q<{%+1>$K7;JcbK8$-Zk*9zBbgf`$F;Ohqn@~LmkIUet6iwIh7KJ{{26puHnz5z zHM<{U*6nVBII_qyg&ILUM!?shWU_g-^>QTDtBHiUYY%#n@1FFM?iO=hO><-YjG4)a zt@Sh7lJ(Tu?ZaujnuQS)OwQim=J6U76+JX&1_i_saASX}H2wRIU~By;8w^+0P{%&d zi{4snvl`u^)Y#F~Wv7}eS`{itMnQ_GAtlL?y|ifult9Z6%RW%`&F^Ip$*YvXjS>gu{< zl5O?Vlg((P^>rr5%~GnwHQlI7TDc=iJLl31m~&LVP^-DOTYYO=qxrGt%yx78uGC_a zsrRYlO|DyGgSnq7f;Wo?C%2e4yU}>F!^Yg&%LHf8V|r7&7_Fnx)^6_TKG|fqq_NssGJ2|e zYfEzW$d)#0=s_X+r$6+jbhPB09@I1S?Jccl{Wkj?;2s341`l=R`-5$FPibkLZXVss z&`7 zv4p4_(3Gaog9fL`^&Ef12=h9Qi{GGq%;!Dq;q^#QYC}2*Qav#NTuG|Ij<-vDnzzZg zcrqD-ytyZN8E$T;eT4*t$ko%LcnU4D=g=bcJ5ytdxMvs~ZeHkV{@%03q~```XO?dC z(Kg-Qqb1$ct1&6uItz`hpG}4Prst6(%$h!CT_3Vsiv4!(GB@<%p1ZRbRlT(yjb;Aa zi#$9G4;lJbp*5zE!!q{_QMFRpV`)^;I5Zdb9z}EfOqv-=E%#P<%#0~5=H2jEYSegr z6UG=HtY-d}_6TomRea4(aw|#oo3`X3e$}%*6w!GRrBi zW@_W)X%lcJL#fR*eP|YFHTgdE=C1xNWFjE7Ng9ZI-FhVMmN#X ze=3bm^W)aTWezOuqe;cA-Gj*%``FTd2&=s>&W`aQyVAHDbZZnpU?KoccU7gOZ5xc zCcJX95p>CQCS7ceZ=_kdaRyBzWRRHauLwkt)kjeFZ z&Gkxt-q&1B7U}ar<}bjqa50v}ORO(?U=}r#UFPkwNK1I9$@TutF+-X^4gpTp;dCXHBKL(gx}h7l*n%x>i!I!e za&DA;SMt6aX3Feu8!|7meDu%rivzQ?5DPBw8!8#TTwx;?aq~ZeJfkJw`pJgaTK^fOFBW}TG4#5 z6`z5=qA9rW?uPxB^yB^K(E*n)V1Lt$rZ&3Z?MG7|`UBUxbnWsNx*A|lj|(vm#Cssx z>s#A7@2!4(y2$TA&G?lq11+hCOOp>>e9#DyQ~IOSL;0(Epr{M5%-x1%>UJ!%E3hom zAF|12CH*-&DD$4Z?8nsyos9aoo6KMu5dT2_m?O>W{SP;DsF{YF_xfW}pSv}k;2Zcv z^+W&3lV{R}8BLw>=6br)xQWhO*|j!eu}5G6eXXEY=abg8IH~;?S%uHB%&xcF-`edT z5DZs8%eRgnW2e_Y>_MY-=Ja~=#?~~+d_+Nqn)kNe=K%8`@{_uzCwWNUfMq^ow{OQX zwVZykP&Glj8mH%<4v=UqSJVCwkd2glBf9( zX}V6WgtyH5Jp&_VHq#di%;2lBtMH*+eq@)QSfjOAWe?1XA zYhnwZ(pGKTIIG?K4HR3v9pbM=X6^ucDQF%Wz?X<-IR@kfa4@YYY5p{z@zm+` zCBWQFyHghe&s^9mAd~!>2-VH*%wB@5!hCCRDVF)P-M#{zrrW}=9)OAS6O`i`Utu34mXAE#+Yxn8(rUKCrA60Wb$mYWcyLLPw>e0hv7`$imQLK zAaZOIT`k-d!KLEF7JE*4Ff!6CkBo0@!`aBZAK`CA=F9EqR5P)~UQ=cx6d1umZI=Jj z_FUXQ>_EjWUBCU0u7UD5qcW{_9NfFT$!$;NzQxwTF4K2lJGTf%jpiTQ(;%Ts4IaRs z?qq7lwzRc1<6QaG_BiW(x&uyk-|t{jG`C{MT)QK?0}huf?Z}G=oOe`9z#VRu;qOi`soPhuXix> zDI@nVJG&rat|Xay+}0(BWont-e%@}sie>R_yIru$&#_Fe!!noZP0Io;shMcfeItUS zV^xHFoQs^?C0ORK#IkrDS%q+v?sEX9*EaK~9Y;>3OS}4EEN|Y?UZ@Ubb;pk6_-=sN z#aO29vD+_LSO3B?w;B%RYwkaH#1~lmjpo`t>=-eR&^%rXJp({3`k9LsbXCKGWq zT{Y029PJ&JwuvneZRXyAh)oSfUwan~95J)0xxp+MNTpf`I(Iv0nw^@PCey*aV&EA1 zdSW+UA)CUTuqiIaGMlwUG5;ATbJRl$xo-x^cvI`ygG(8pp zF14UtrXIm|(Jph3Bf=EA_p__q7I>fTn;gk^7_ZxPByVJPrIvcqQnaLDMlqM|%HMS! z+|B*w^E7owKDSBWm>ErW_+@u9HMWS~?0Q^NvhgUoajMN8rZ<#l(myc05T-!~oKZWMYTL;+-Jr;Kk!d<~jcc-R&Yf}oDc@N9N$95af zS)`B{Fs}?6)ikS-?r-3VU?p82XFi8XZXHZE#GLiWPRCS zI$2*wR}#6aHX}B@5X%L$G&Mub{e$;2PYmAQEE{})d68^hv$?6;V6)mTKeEfUcA2^t z`!l@!Gqww~G(r0XKWfh1oo_4g_x%e|yDW@yOJRhj7+*i*RJvWaJAD)7&BbJtd%+sL zXpL~C@$Bw0d6`u-e1@9*?o@*};O>^bs%%yv5 zxI6W?Jqf04!mQD8qbHh$dzfp6)X-C`u{(c9-vHh98)_b+tGkufW}gF^%!_*rYcf}m zRl)9(i&*5W-9zquLVQlp8tbQ6LeC#U=p}@%w;8EL2s6(vQ=jz>Quo|3Jf^$pP8rL2kZw+vQ5@wNz|#@1CXln59G%Ec-NVt+89nX{%_-^>&#mQmI16PHZtB?|BR@ zzu9wSGhNpFkp|p&^TnP=n2YwJ&iOBjeuSB`*9dbt^p~hx>U+C9e{*bKw0U5ty$rmS z@(Y(?-=eEF51>!}N_(zY`U9Pvw)E^NBrZ4VIFxlqG zZXWHWF0#u7cA0^lP3ghKP`X~*!F=!hCYhR4k60m)Ok@MGLNK#cK2WU51TvvQ zFcnBfQ^7(oA4~`GeWIzFbf6F{T3Mv*Y#@=Yji$*URTGXxBhg$S6-Wo-(QF{SX?nBb zrkUDAB;P$9P6x9+$!nmv4dv8kgJclP^h*|lkz(&GF{zqDAQMOja{>Ji5hF;^Y$zUs zUwjgYWHyksM!bVi@)SrEgH(7bV<2Bs3`L_`o@0Je5!$?sCjOEFHArMD-iWDs0E!8_sr7PB^w$1j<_R03iY?9d| zyGgE3ev?9Nu{PT++b!R%&@I=!Kp2Iv|D}T1Mr&jP;c%?bFV`O*YOG8kAENT+sIc*P zJedy0vt&t4xM{H_-#eNB6V8*XLa11i4$&61FEt=x`5LNJBELnVxLu?eN)~&^Qr(Kw zQJHOXJqy9S?Xp~u3K~G=DM+4tr31N|Y$zYh)TU}PHAVVRU21ZnTqqSxZ(8V+>YfV6 z^HkhSZ6=rrQj3OiRQ1&6DKf~S6N(|~u52hybRZQ>CgR~pJXITwWCJ zV>HC5>#1-UG{BRwXuKH62NP(LLNG_Ilqk@_Z|LrlX`qj$!)e3SN0OdG505_i`&*8N z4c!bid(k2-KiGbP^gu_yL3%EIG{Jr#eLlnnC9KBL!qp9uhkS2&cAz}BJcCGADo<)F z(8gRx`6!R-`)J!O58ZI>ph?>Dh3N(t5;V%^YFpo}ZMHdv3TW#qTKO1fmv~o$&x`$3 z;Z;}5hqvJXXA7@d`KTwps}VmY{AI$cR{jPLuli21-<5uIAG?+t2=<-z*I&rq?XO2k zqrVcK@l%lU3?a8@Pt^yJcKb`q7sUo8tk6HMM*YJ0M-i0fia*t`A4s3P{JR0=T@Ajl zBWPn#O+u~jsC9p^mlk~Hfp4LpnX-J zL3*yk<2J3U>!@t5*7_8L(e`jP+M_7(8i+?c)ygM5ysN<{uUh$xC%&s~{YS9D zds=_dB_11;uo_2;jHAJ4N7`)qgFKHv)i6W*B^-P3uD0(>%PZ8(<^}&D@}Z)?1N3S8q!i$NOoXIC6cEAQ49ysN=SV)*Bk};JGlf?Tdz9a8FYvAgpE`kzD5Zo~t^7TlU5fAO&gPrT$X|o7 zSY1sT^UXBRd=ov9jk?pHlrVl&_aj|tJnFw=Mfp%4S9eyP1o?BzGnI6u@}#9aZ%KJn zukn;;pI(*Am-ZYls_73+_Ij-#*JoFYPFzP9UX)Ou&dQ%5d$;`bryE=T>7MqC&<~K1 z`q6nF?WuZK(v{jX%I2m1bv4FET>Q-tf2wEu_zR;Vl(0hoxElTv3FI2{iuh9v`+@XH zV1p7?;9U(qS8ub;d%~-RJ^24(gA!KYRj(s^TrVg7#O>Xk{^DV;pKoHlrReajtOtsY ziH5(<`e$FVcl&1;X^gKKp8m;AM(K>XgYwZos-GZTsei(3UaF6)(H?p6S4%g-;ZHTn zi}r|kcvpij3Lh3;wes$GKzq6xd_*d}lklpQcjJL~HTanDdke2xc{g6A_(|bM2(McC zoZ$ow-qna7ZRGrM!mCz3#o49ycQyE|@RNjBt$ffv1tJ}3Nz!mCz3>)~AuK6xq|{84z-%7^K?0ttE?EnE#gHN$3`jPR=-|DEjZd~^rT zH}vN$tFxjDqI06xLem^(j;^r*;lH!_=qs|9L&MsCPrA~4luFrbGoAj}h51AExuoZE zmR)LnBC-z}^>H=YBa>o-7sQ|Hl|KIRT>aAca5elTr4YN)AFfb7)d!Mx%XfuGlc}Bm z!gSq%1dZ~#8vaxBZMOMH{HreU*r0@!@i=NMSQ?MDSDRZ*G112jX#6JJ}tVI{*VW~P&E8E zU?B<9Y=a6~*O9%ewxu2m+C?EZ!`UcXK>X(!l2#xx=8toPS3mbeO{#3($ zAbpb9poEp>9SuIU#AciCgjWqS@Da`~@va7+5k9V)*V~;X_sPL+lPjPlBzN^9KgdZ!s>Pe(4^@s7CUtMkeJxzCqdwt92gzKhl`r+dSWw(-MF3mOOq{w~($h zpA3>1S{~I8l6^$-utI)k<$IRw-SWOf8s%&ElrJac8@d&jPxT1WmCBbzU`kp(S7W>+ zmvjC_;!ic~2hu0b*(Ki9;B&%Xqva8;e9XhU8oYUd4HgQoTKODjm*TtH#uxrRjW1gH zl!tdUczs?}PI%SIyYa@+PFLIVzr+FlrsWr{yc-X^tHJB@%3c*-wekseU#h>W!51Xn zKZI9ZEw9gSD`@>!a6sjgp7^dte0}cQ2g0jXKI`FK4PKuU_lfYTtL621bDs&XTKSwO zzN-;mpHH_=c-7VN`aHXDgjcP6$`jw!h_BDZ`$5Z}XF&O!hj+Ctzu1TR@qD1q!Balv z;av?r{xTc%5?*z+ygpa2pT-w|)$;LIIR4HWU$pWu&Mu9ASEKxCvENU4)yii)ysN=S zUuAi z!ROv$J}bOx<%`&$gcZu~YVg^&ZMJzrc-62+`$svu#Jd`NLHHMhS6wY1Uc~`k6JE9Q zDNlS?BYs-=g7B)9PkMM)gE#+VgSEn|u9i;<|CR8ntK|#AoBlk1saD>t?>O4&YLq|m z4wt{T@T!$}>kHo1;Pv^STM4gP`8c~T^}nmZ>vKrA6JE9QQ4jBG@cKN{A;POxKI!3I z4PKv%I!t)g)$-8-2N)^5YUR_O_^!6`g&(8wMJpfo@U8~0&y_t&c-6`$J-n;Ir`}_O ziNdQ^KI-9J4PKu!dxG$)tK|z4zg~FN%BMW>U5)sO_t{{I@T!&H$}|6|ZYBGO_{J*b z(U*JlO&*;ky(`^IjZCbuULF-46aAFxV>$nM)stBNU3G%>o2u(sze74=J@aC%M}Ozh zedu?uuKo5NJ;bAb?$Jkh^hA%I?9r_ro$~0*Jo*-oe$b;|@@Vv5XW#b&bhJJG{>}U%;S-{j zFM9r-=W6irFPMKwc-6{BYB(Qy94%Z8KKV80KP$Xy<&7u4t1bTn^RFr|TKT9`U&MDc z_)Gwn#{5fo)yl^_@m&qR(1ZCegjcP6!V}-s;A4H54-Vk*q+0oSE!Phk<##psbYJAq zbJ~PgjlBcu6XR@y6?j*J&u`8Ky9%!wd%?#&<##ps$X3iBB)n?n)0|z3?`rVber#~G z@T!#`L1jRKM)_Uc+3|cT`D?HwFIq`gI-d184zJ}2%RViSt5F|)e)_QO zxIa}_%SYsS=!Xffx>{bJ*B%#Mb+vp<;-4tI>T3D8@Kc3Xt$fteey&FQrG#%6UbXTO z5ASO58R1jHtFD&M2|r(W)z$I^;TH(6x>{bJo4-(a)yl^_^>;Puug}}RPk7bJ=RLfu z?f8}F^FJZHKDS@_oQHQcczwSAOTw#GzTn|q4L-XqEa^Rr!mCz3ZgV%x2d)NhUt&(H zZ-iH^e8$7O8hi#XeWA3;_I&)RRzA$xrTNI!w*1?%!C>LDqLnXN?;FbRY8!uh=ErG# z(aL8%ysN>-@ejc$og%zy<=y#v9PFL>-NxUE`7<@X=u1ggnh#T+^OLLLFM@xFM(Hi_ zry6^4en}&f5;V%=YVcX%|1G>~5HTd{oxu7b#Lu0={D;D;RzBw8 zT@BteF>iL{`m0tx@8MkyUf;9QUwGBZ7d*#wEC72A@3-md0GU zBln+b?8W%cdFtZpb@_SK?xeXzSrh~9XY;g;Z;}5>-&4w3a`3aUf=ukgYc@Aw+-jCpQ}-S zeJ{_ZJ8}D~R=(hAKUag-_xbE3ylUm$_D27?8hq|DSQ_(l;Z-Z2vbh`j&(+{#motBq z@T!$hdw5ra&kH|U%P(5_J3YMW-;#Yq^02zZqi^=;hdugrk4C)C&X*sMeS;J4Ytj|( zPstbB=AF4eQ=;dRp6l>hzp(6s9!CpTqkYoCzbXDyD=*W#9ai97-C2E#A4l^6Z6!^)u>NF{Jk&!RBL?-xQ3wwjrzD6eC~SW81t?0s+o8h-q@g|^p0i8s=W6izWo$4~c-6`$$OjTM;wK;|L4%Jzi!Ec05?(d-B7Tyy zOT4SWXP#q&6NFc-e2#n|K_h++f)X_N#PirP<}~3|W3R2h&E3G~9c|0MocY;We$mRu z9ec!gHTaa+&kZdf4}gmmCt(0?`j+WC651u#uxop(v^;!#|W=l z`Fw3h-qqlv^pta?6NFc-e3bE0`CV<}3*VseMJu21@U8}*6Z_MISFL=?!@C-M>>XIr zdu)YQt^5Txcf)+3dLG$FBoC{rNaNot#2yIQy*EJ9y_J}pZx)G8i2k#Of5M|*_2~CK zdYwmi8{Dxx{XBZGM<49bV?27IM<+abnn%y}=!-o1Mvq4Oc6NTei|iY0OY-6Y(v{AS zdFj8Mcjx0z^#P*%KwBxvxi2A>oDW8qaR zpT`CztiZb(eEL6Z@U`%&u^0V6!gGFcwR=2uAJXyoIh@!A`e^zk<>PotdVVio_>AK} zO8FT7s#lPnt1zv#JW1IHjrzD6^`WQZS&J?AWPhr$7xhWm+zsvFYVdjC2MMoQ`Gkje zHTbAJVBjF(RUb*(trp9?)&{TDsgbFPN}+~!=qcf`MHuAgeved%GI-iw|Lck^Q)Ss$q}zSwSBp}4v zu2i4Mo*e&fiLd$@(v|8Xx93XbQQdo}F%er*UTo{pyL-JZr{)TtHGzovB58eSFL;w8|p9-&9`2vh7L4z+qP=W@Zn!)@J!mCC;;%7L!#Jd`NT3Cn z@I~QOSIg&w|513=$``Rg2`jXpt8M$8&-LHpVD8VXXyx7Z0`F?@i3^w?B)n?nV+c+O z8hi|b5;XXX@IMz`HS%#hWwAjCD;wX@;N$Z+{*l6~h8g%ceUOxQwT&-)LgR~8KEm!x zysN?IE@p$%g;%Y7k;9jGSA)-9!u;=qSFOASo$|Zd^7EO$LV3~3Cq4094L))y^S21E zTKP#HUiCv{kMni%)#~mid7sbxEb*1@zoeu*2mFG^qv|6_SDIhqp7OaG^~;ODwD?o4 z^$UA=SA#DIf4lIim5+FMSA#c~ar-_jylUk~cz9QLHeatGe+|N7^#|F|)$+MpncqTq z)g|8Z_o|_AiNP>;;}&qE6Y0?eE1RO z3o(wb8fKUeBcAqiHTdWg%zrJsYUSPbvhms6mIr(+$2)!$UbXTODgzQU_y`0gXz&T) zw;ImnSB-pIei&1NuEeK=-&1(i%Ez4X2j10)pL>?ee~9p^m6zdBitlRh$>q!+CA@0o z3n)A#Xv8l-P=W>@e}VavhI9Q@BOmpr_rco)4c^tAU7vX0e{nkbuXKHq{42+QpYm~k zMfKOD=W^&$e3U2axxeIU)F<*f`-_cWf2t|V)+cAZZD`OZ{F%b5RzBj1?`p))2!Dz2s+CV+gA!KbXyIz`k(FHj>x5UGC0(gMBA)(m zHT=ciWq;p_Kh=nj{)~9;H@X^p;(g{f8_E5tTKO4&*n{8K`TIP0)rXQjz8^(i3z3yEqeaI=A168~daCG@=vL7NFW#ec zj_Nm9Ur0J)b9iyBN8cj$sW;jFeoy|hlAn|OzkBjgzs`>D_sG7%iT?@dO2>EczubN& z9>)Erx|Q@?hu8LWk0-RJtI;2^&)MH&;!pJpKK|b7#X;a7{#0*!IQLJFl_6_@{LbpT z3)wfYE4$p2bfx-6zUT7YNcou0RNqUwQhlT1Q_JUS)Hg2vz7~I~VLuQoHe`kRx!UqS zaCy3o;_}2rE1v*N2^xF?f)X_Ntl0MxUN!O&e|8^QP=W^U>dxBJ`+lK4$$zExjP~aK zxk2KqzK3+B_Kc$-l(amqMtxF!*x#4pPc`gOp8{u>cvpi@gxR3S5!{}tl|Kr>DM6z> zRBuD}5oAc(!=s0j#(a^GfZ#i8KkxfCjv^lI*XsFuW>(7kB;{i~s(zVtrS>bO7W*! z%j5og1JuXW;PZPjzfgG9%BMKH6yMe0Mv{_n!8hCSLd z>4~qpK=v3f#ecEEzeR^vv;I+ZR5bi`HlBKq={Ub_NxIVUm_2~~&!c=hoEmz zDJ~M?qyDZ&{d2;9BK}mv9`$$aEAe^ZzZPD#@(J>R1Pwj`K?xf1qX%+*Hu)vjM>X;h zKTaPcXz;EEpAvpY;Z-Z208B~wgjE~j7li-0@T!$>>&bxfu6Fx#6!8t>8>>q^dI4$l z=NX>)Au*im|AWL=9sX72{>(@WEsv|w9%cmlOAwFop&FZL&kTK#{P>LUZNjToKF@fG zcQxWCM{@jgg;%Y7+QYlrmj5v3uhsI4R=()rT@Ah{_KSsAt$fnMyBd7raE||^@Tymk zo+~U?>Mw&0(c@^_)wVuIu)hIgr9VU~KZ5a6d#c`>>@mN@Wd8UW>4?~3HQJ-$ue0%Z zEZMu`vw?J_@fer#y+rvKKdRp)U8(+QDHGzO{;o#-3*s+&B>PhhdyL23JiMzrtIy%& z&#liRaUA~$;Z-Z|o*%~{9x^ClW#b>k{P7xJwDJ)cQ-TH` zfuIBpJ{)I$n((TTkMZD^7rd*%M}$9Hc-6}1u|Wwd@U8}5JeuQQuH_dEd&G~>2MHQ{ z1cDMY`0#kGWTWY6j|Sh_cz>Df8x*GX+oUUv_lT6|5W4Wi@vC|~ z>A4QC<&DWcXw=u$sBc32-6Z~0-|OSA;PK~b_=`>8_WM@+sYZOXUj`eLutIrU4Zbju z`K{tyKh>}YpT-6ytiZb(eDYZ4qr$6(J@_ZFK?y7HuI{XVeo6isEXj+LNLT8g=p>H+ zg2Y$-HtD$zujPrzJ}r-{J1fsVM|UjG!K5pdCobj5P(H?s>ibDoDo@^19#^A%Bgb?7 z%y{;vTI-X-1|_V}zODwJ`8D(XgjWrF^iP&PNXok!eEbCF_Yz*U@@d9PysN<%gdZWi z>SIY)Y7hDun@w6CS9jJw3&~%Duvpzgx>El{PUQM*HbL4`^bVvel_x4bwLGr2?IZj& z@fR1Z?UVKJt_E*T;_{p&ylUl>9^Td9lfuszUbXUR5ASLl|2G`}dW|ny`J9J$HTay^ z-!Hsslm(&>McoEs*gJ!P##y?{tyzQ? zl#X9lgHP0RdCnAG^?aZ5xID_^YWOp!u)kH}PqmiEEkAfygHHx5Sgd+>3M=|6t)&D_>;1#Jd`N zq=ETg2(McCI5sF@HI5dp2A^zX{&3+{!ye^N&<9ERgjKA;=Y>B`c-6|M9ec!gHTc97 zj^7}>>T3C-@Uw(ht^Cp0poA6TtG#FS-(R#6Rq!G9wJ)br+ld9-_HJz7p?DqZ4s^S zPd!`hm$CgE(fU5b%hmol&c8vlzCZA8&0o&>OGWGZ{hrl)xxjf%w7!4ueYJmy`Hw{F z`|&;%t?#>Ar~C@G|3-*F8(EOL#{y@!th4m4l^?hX%MC<#<>NWpWwoi)I_k*1)THp6|rD%PB*Fw?yKCTBv z>-)8qiPraJy&_uQfAvq%`aY{QqV@e$>qP7Orp$@lp8Ec%UZVAVP<5j9{Z2cG*7r5- zE?VEew2x?gpHfV;z8`6zb_49 zN?VE6_gCy8THi-8T(rJl;yBSpp4UHFbXatY@}kcct?yH~P;^Z4{~%i5cW{&Fl;qzn zIwSfa(K*r2h%Si!yJ&s>|0>b?JpYeH>+|`)60OhM5B)~Q;{a}-exmhx_WOy}=b`^f zv_9`Uq4uMhpD9|Ow|$A)%k#8v7Ol_2en_-F-}+_I`n>9oMeFmYzZ0#`lirNZ8(A_+8cW+5Z=!^?AL$6I?%i9_m2R`h3$vMCwO$de&&w)^*5_aSN3=fA>KoDee5%@0xPA0_ zQ(K7E=SS@w>+>u=6s^yv zSSMPaH(@4o`Stk`eMIZ?Ao_{c=R52qTA#PDzi55_Kuom$d-QRl_1}}9BwGJ{c&ljr z_ug|v>%X_YQndd2<%OCr|GxM>(faR$9}}(rUiAgh`tMKQQhWLLrE5j&zlZupbYA|w zMb8Eq|MGj~?L_PEe|HhBzh~V~wEmuRxM=--V_fs)_lr|R>+cQE60N@X#M?1O{0uo`F%oP(faqgoki>4-}V=+e@{DHwElhU zIL(*8cQuLDzhBK3t$&ZYRPE*OOE;^%{5|C_qV?}7Pm4Bke{!Yf%l)kXh}QcjUy2UP z_ubGGuCIPy?hjo<--pi*8Km7r$IfAWfav9-4;LN&E$2@Z9Tz=W^eoY>q8ErhSM*ZR zY0(AIH;G;^`d-nKe#h}17o8EkLiBRcZ;M_j`V-NEe$V_jqGO_aoXYi2i0&tPk?37T z=S1%>+N9XuVWOj=Cy1UZ`V`S=(Wi^fi%yANFZy!Pk#pJqjiL_}eVgcmL@yQ{6a5#_ zqeMRFd--ynOo-W#4#Qx6_-Cy)2 zqT`~k6P*-&r|5a2mx|7aeqMAz^c$LgF~|Er^sq}5Is(L(I<%>bSd-AqGO`Z7M&1%vFKT%uNA#s^dixb%h=yTqLZSZ6TLw6 z>!S0bSBox){z7#B%h_LW8n?$V(S1e7L`VK#d*1^k=T+S|4yDk9KS~N|noum#;yTS? z|IF^}AKEz5?n>5@m9*BbBs(}6&(3_S9q;VScxF~wi4eBL6gLN`0wl51l&JiPIgk>C zkU~QN0X7gCw+eySheD1TNbRO>>OjvaC23B7_ub!p-+SN8T5@K*bx7l`j6eh=~Ih(AQU=Uz?!)5MF!Um(7h_&*U}A$~&evvHqwpT7TX;%(yV>KcBD z_-_(lA^tnWcl?sR|Mw05bH%SD-u@NEhluyQOYuqKeZ+~qf4_!r5MLxdO?-*?^~AaN zYW$xk-XeZK@!iA^5}zmjkHqgL{u5&JFaAwp^9T9Y8!C?rUr>JEPi+2ot|vBo|5p&3 zeai%~*|!|9_+QlYP7s@Y%N@jK-*TtnKhXG_7XM+zZy+{%m48NT_8a#RoBsU$#HJtp zL1NR7{tU6{M}L9X^c}xq_)+EmD6!pt{i%gNrs4lv@ONRMdkYr5_Ka& z{P(u6C${fxzuYjtxBbJ0`MvEi!*^)<|Ilzr@eHwjpX5~*UeWO5#O6Q#cEj|)RwXun zYz@Qo$F^yh{@7k?nEu$_V3_{c-UR%@>u`U2tIFpc#HRoFL1NRtdWhKcsU9Wv`cZdj zdZthIVq&|`dO5NA%e#r#?u(BR+x_V(vEA=)+55b&elxN8|9p>Nj3-}b|M&p$GVzCr zA0@s-{5bLN2!=fNRb2DPeT8@g`zZPQ&%|br^1t~0-bYk^-`P_B`@W)huizIzzCWw= zTOhtbyk9W*nZ4Q(;_cTezuSmMaIP$WRSUnfT(3PF%Ui1*3lVepu`GFBpD#NW-7MspY$o`F#oT zA>tvyc>nuY-}{L7eO}YMg?JCcR|KQHmzdwX1fzWB-|uIL&0pc$iOqlDJBjz4*8Kej zag+V^W5l_emH%a8)6f5^VAR)p&uD%BSK`kRf1CIt#LodAiT?=kiv^>+7dYSDNPLC( zm5e_{`OFjVBYw4Dl-KMxHi*q1=}!?~{s&sVpCy)a68ZZV#QTUpKy3cC9w0XVOb=T) z{TKa-Vfr8XbBj-ZO3yo^`7{4sKS;cn{&gma&7au3#iu{2pCmT_RxNw~^mn-YzlqrV zp}&jR>_0wgnB)8J5t}~K*NHE@RQvn4h|T}_4{T}vx3?X;+%R$TUn+hjvH3f{h1l#3 zR*B7?;T*AjANf~^?fbePvG~_(ejYNsrtR-fiA}%c*=IF>x%)LgFC)JAZpCB7d*7*e zj`+%Z6fY8+{aMN0-=qB6_Wq5UpEp=I@x8=m@AH0Q^H2U6!}MQwg?QgvmH&SuHh+9C zILG$9srCDJiOt{OO~mFu@Fy%j{rfeE&0pg^#OBZc9Tq;P<@*id3qPpk`z-OLU)B6w zw(uE^|A!XN?;HOav3;-mdtSr(V0(L+U>OhpjlMrZyzjRa&oRE)3!Nl3{{b~(^9Qg^ zZ2k$}PP}(p^ZU!hmr9C%o%oJB6n~ufJm>$11Y`YriR;&|5^obfPP~`++kF4Z_iK88 zZd`Veb>a zRxsxG&vAZ#i(tqg&f>GYfEN_MQ5#nu& zPya>diOv7euNmg|86F@$|F>D+#Fsv%_-n)?pHcix;>({@{G4sg-yVj4FYyx(YWNMr zi64!{&e=6txwk`bAir+?j2l>5|c;6>9{I`hBe)f|VenIDt z%f#j{>x#vvKe7KwZ2r_<_>Z-`=HKfEV)J))6S4WPI!tW-w0^?gpLkYI{@Q{uzHVFn zF?YP-i0>Ft zJW70tc!v1=0S!M&{KT;05^;0C;yUpjhQH1*-+vSF#aWGipM}pTzMr@`s`w+sBR462 zkT`cx@x#RXD8FwIU--C&fA`O5`R)78HxS$RgnyLSzDIj2v3<|EM!Zb}uDgjZ5dSjq zp5Ih{ziIE&zuyDI=HKwk_WlPo{^J%-e_PMGTk~uF8DC6n{-ACkHvdwS7XGg9a0wnE zHh+XgV)Kvq8e;Qz_jAPN|L?uT`z~pEpCC5>bYCJie|?V=-@*9LdV}WQ?B8EPZ2lpK ziOs*%EV21JTP8ODVe7FbIgC*JqRioXqfovMAi{5|)L zG5+ohzCMFTGk7k87c%%*2A|B}pUmLZ46bMJnGAki2H%~*zm&oMDuX|j!C%VYKhEH9 zX7G336U**c(O%1KA|C+FZNGm=D+11;f)@HdggDPLo6%SVH)%Kb&lJEl}huK!OQ!STjjv`_@ zD5B8tt!gI?USBGg>JZt%Y7MU)*y^;jUsO>=yC^xw&YJT4k>m`j6_wcPUvvX2h&14A z^X+>?9AZ}}o^DQAcbM0*SN6A(l6DZG+?;fd-8>WF+m4^uPr_2tnLm1{(O7TiigS%) z$wsM}D>5NQIo_;bcp%u{Y$o-JPpy{t5Xe4AR}td@L|H%u<*JR{Y$c5$-$u};XE)oO z#>RYO0F6XSQ9Q6w?JSixnzf|j$|+c93JAXcs&;j~<3JcP+dq!KTv5xnxY@Bs)G}^& zNncJ%txDqzI=YsLqf)uG|dPPNt^#Bh^Z0cXhT^ejM7hgDyxG`fnFjlDjrb_0BGKCgo?7RjJiZ zZjl`HU!cJiM2B2$e=F5a5d$LT1ZjcmbLHjIN)5x=`hGrjus+yD@i}&s9y(vr!F<0` z>R);+hRoy`@@J|8s1P@C^^ziZEK0>|)`g{mSV^@?vWCJ?(@0iV+d6eH*7}SDwGG|o zkb6ajEEnH}jpSrb+r6c}aI@I~lH&s61a>UdM!o-f(ZYy~mO7=*CgxfHco@q(?0%Gz zbPlvyjg|wmYe{*1sd}o87g`#QoXyu)8yZ~05bmDl5}kpOq%78CO;)Sc^$j7+H`3KD z;-FR7Y>xC)=1fOcO^2~eKr93uavetVsseE#n8?v_W=i!6g4Tb$dg@&16dsP(o2BwP z`W2pMOP#Ut!i3aeZFeiN=4ui7U&x5B?`e%?K_ji7PFkJihFj?Loh(*`m3DLZ?B;11 znN-a4vK^i)bp|jX1iiQ1s5M%}a;dx~d#C<0E(=;67uK+4+$h!EBV^+Gx;iOZ-niY%SK&VR?AWItqD7@BMt`^;4ZSmt71Z()&~Dv80)lI!7_yCz%k5bF?MfF-*5|bh46k zma6BHoNVTIaddF(Y>anPl?`xx_XUP}Q4=dZv;H0wMlw(TaBkg)?YGQWrxN9Q)wP-NaymKL7sa6JXs&g#`5_cab#rX`;(#u#oaBWJBq}+-wA*u#<~KO);UqIkIFu#$7}c&QplIxcMx&WW5&=Ti{hKICnyRPbZBNEC=~JGH zC!?iNr{wVfMKU@O6nt)0pb3aUA|DmB{5v-*xze{!91zM0sQ}EAbM2-K!0vgml~fis zH%b~}$i>EP1%b0`7^h2;y~QbC`>uvNvO#PY8#o~?t+YqnzoWTgyIiZ{?pps3(G!NR z$B9YX2}7l6#h5X?FkQG8r$Z*ZFi11)-x9GePWjgq+Ivx;$Q@C;8jYv2~7BUQKZ4aJPZbNHd%DN-c3w56gvxLjn`-kLRm^lvyF`v9LZFc)=KqyqmEm)7OpKV&k)8E4o|XDz?Pv}*(}xE zZV#I$NzTqKUD^hGRkd@Q&9>Y@RO_d9WzY)PNhdh2+>>LcRu)j)#S+Yo`WAM;V*tIH z2Q8M87j&el<$V&u zgS4gE3Zn1Ef7Q)jmZx;XZs81OX_V!K>B(3HmE(8?QFmd+vimy4$&?K@OsIj81IHo>!l+=EK9(mi~Wy3#0RLkl37* z!cpB5Uv-zeII~rqp}u<$ZVphyVO*);e^s8IAE=l8-W|t*t z8elHRIGGTgCEU)4_L79+grU)@o@>-QhS6xig?dYNc@=E-(+zzpN7ul*YFXM}T0<^Q z3Z3W?Ax*?6D5m5rJ(dUvJeeRRJe){t5s6y;=_9I0&jLVpVgPwLtwxVnmB2_pu23n8 zNinJK;!fT(ZLBb&71JLsH*;-zJ(j@vCIZ$Yvs`s5lG{qrJTu-G(>WaIRe-G5l zvIN!LXWuy}QIA==9a7f&`*dduk}74Agw10UmqDs`{Hn&v07T%G5w*Pi-UlOHoI1;*3pD3GN-tS zaUtaGl+AO+fJ9mOcl)mtubWUFoYuomr4BFugF<2Df~LPPTdI{eYfzp&(C)y_p_3eJ zv}Q#K!`*?KI>}LXh#<=^&Kd)$=Y68e}M4NOoN~EO1xf zP^dCvfxgEMUna-lM5$I4HEZRRE2DCDwYXr%@xnLSh2(TnlU6c-_Q&$*tmh6uC1LF) z$_AQ&DLjb7VvHcdT3$)vJhm(mfj4MD3@oHq-PP$X%8v|1f|pudT6a$H)PKfJ$E5yeE6v?G+un>cNAI{%QhkkC3QRhfmbNyEax!Tpsxp@gpl(Pk3uB4vSll*H(ktpoLPdI#j9fs(xi zis{|)BZ;`xS1gQ_iCmNVeW4snT>Toj@8RGYm!_$ukeKtd&`Ctkb^wix7Ei?`k^d5m zUsT@+Q#nSabIEc8mU~V;7Yzk9YZnx*8~0s!H#}(lBW+2Odt?|ch*pAWPN6w6oc%tC zEgR@Xc@yz1*VZIl?j;~s#Bqu=_r+2h1%Zh~pahEspmD$kYOFfcfN1)z`*B|d?aZ08 z9cVEpEzy>(+@<|Sv|b%EJm8F56PU=Qb7G(8bBV07uWh}X^0Wn@Kb>-QJD4S4$^{EQ zIePQ=TH$g=hIr3ic84&|Q03$WPqtN#suemTJ ztl1jWbDM<{sF*BCLT35s1JT+v1kK73RoU|F#!3TMm$IoTp?B=!yy981D(9I6^gd*@ z?{4RlM;$^Smim!%Sbj<)kEo8a+&FU1Q6VaKHh27l>igq$kmSPGf|rt08wt!p!j#=k zkaM_kJJvvVOh~k3$9<|6P3?g!ah?ly#X15*Vw@Uoh(QsJ9D{->J<5@9L&gVV+$q^{ zyI9c85>+H*u5VdiWABa3g)sI={sv$#B;$wK3rU3_Wv9O@mPo0bK-B{Y<;aM7Afcot z^cfl*m5NPazmAjZL|s6fRZ4PTO$$p8jH!Z zP!x&c>3oL4Ukoa_$_`Rzz^;u|*ag7wkW-V4{yO4wvDSCr)a21KG4#XY=y0jis&2Vq z`EY4Hkp-f^7{Z7qG~Sx%3aVZYQZ8KYaS4~Z5zFnW8NjI zv$eO>fP{D(b~34+TI*08F6#W~gv_o!?z%>~O#|KhY+>!QxMSPe#W{ft+43-~$k>YY zqmI%8*bVs-aSC(^_unx5$)vNLk|Ak!s4z61ht6F`_E)iwOGi=( z%q6QOC^Feb8XYh)d=;4~VQ0(PzH@ku5^_e5Y#<9dbq~VqEWt`NwWr*Wl@o3;8={;g zyDpd$q9d!dSsQw!BEtc6=%L}Y@Oav7goPJO7li{xU^(`1+dX&mez?@eZc|I`s7D%% z?%FNo;XF119V~QYf_QW6r3$ziCAI1}t=_S-^>D z4J=OL=FRkwg&jyb@GN-#s0#XdlF>$Q2YucgsZpx91GMxE0IdcW6q^I7g&^<##7|7! zlZvu{eR;K`{cl||2+ikXrMg(j3lvu}4uzL{PhVYzTx=|K!wm)3>I}KCK2s(- zTdumJ^S-Z?pQPCu2PvjMlS}N3eh{tJIG~7g4LItmRB=9phU@MG3?Ii$TTHPSa}87P zGK%5!9iv!`xkjo4X0()&zL(N0mW)aIj1DBgBDZs9^ZxWTJL4dA!FdO3^W+%3J(Su5 z>4nAtbs;Isxv4wm97H`^+UVZQyv(tj)0Z1MrCX42cQ?@3<<+WXInfPD>_V_T))2QN zEY{@0uw8_OR=@M;lk|ozR#Fvni6i4W#NCbdxh_%eU5v^(96!nizwd+QCn=t1A;r=u zS$Pg>Nb?NPz@qfsS(bA-7n1dKw~HJeq40DAuI6O%Fo<^Q^SGAltl?gu@-((5GB9zU zY_!%Bm_hZcLakNobMHj0X&*2zZ3-7koAol!z?8Cdw$8dyyzE4v7hqB~N`=&M)8N=V zjndKdO*l)X)#Pxg1|NlksAbE$lZ_+|1qVr5)*)w9Q*9u8c3caRiIfft7+g7GeKUxH zMFo(gk*?dyYP)hvIZr}8ir^XLH3st;g{!vmRcxPGTZh~Y$`TssaYDuUfrJEmF5B$ID6U0}pS|oU#FonLfQ7G*i zOgAhF^ZpI|tN-`>9i&$JBca89@Qgbjxe9Zx3C4ow@!)xvTm?K;PXId^%?I|BX6u_; zUk0X>DNziOdq(X+jg6-RUe1)cI~AlI8Blw(>NKj7qMZ3yK@NPhE?S(Y^j(=hIsGOryh2=F3^LjoCg1!P{q;aO~z8Q4!gv&<>gz|n4}-DQ!#)OP5vZta*A zf(p%+PfqDaNzVY=Ft-lHc09Fn>SavQZ7YykjXVWo3Pg=8AFjbzp-ZXzX;Q`Z+C!1{ zbZ|?G)w#Q=dWs6Vvg((aoT?c;^kjEZiAj(D+yZHIu^e5iCnmSjfW-Q3|KT z5m5>!M_~f(VPRw%OC1l##|zQBlW|hxlW>WYMxLAwlNz6zm<~gy$D)*{3sK}koU4fu ztjc`Kh4GOvslw=FScF18AC|W;66FdBhoR$R`S9I5mH`2y{MdBJXlyJ~-h7y=vHYZ5 zS*z~4{0}L~|G-ZEhcI6Na0y{yWGu|Y_}Ek=nyINM6O;K!Qd4nKg^?(!LX=ctq!1P! zf(zmJv^bRUnJkP=hq5S)$M23sg&!}-wkCadA`)w1VkBxe(_>+Y&@!U(#zG$-pNz^| z7!5OtOhs*OB2IZ?BFxqJ)Og5uVzdy-sxU3;1-=O56H&VvpMV$cG<0fgJbZU@I%<)V z=YAJ50x7@Y|Dju+y03lZP3f+$h=Y>bajh3yrMA(RG& zg;0|4Iv(X21rCxz!ePp2Wnra^74lJ1g=o|mE5t>ZiV8S39+zk;YV8vvQz74pd_2UA zOh$RmN0l-H>9J7GW1|ycg^rCxv*1`p&eKs3&AWc&KcfY8sNNrm z>Zz)FHO05$`jdPz;>o{CAP0iG;MF`;)m8WDp$RiIadAw#gZWr$XObq-r?xNkb+M2W z4QI^gUVqo?oI++!Gtp@yJ{2{#P(>$up^~{K(B*}E5Tdy552KJBZ(eyV#+BYZRPYv^ z^?1s)nQ3-k;rG&YF%1M+L^^lE zbE*!n!0o^MV`{IY2mbt!iGaX=3e*eG^4v>VE!^NcD&7&5L{x{;&aIt$QL&zzXt<7W zc$S-?K-U?XkLG4X-UOr>sRGxucCfyR+`;rP$O?0abhDXENj{$->7{6tbZFScJZ2Q> zNlj0?o%oQNosL(HAT2IRTnK5k;1zFLi)R@LLKjygsZEC^DUl*qS+;494A!2i6}U4& zjB@HKEzF(2Ch(;rh3>PFTes(BMxnlzeiqTyZtURTK=j>2L`a=4xfD`pe!^mJ22u$D zMSEsSkP{Kaz`=$2>NiL;YFRchLTXr@64LkWn;4AkKR1M=qf2ysH@$fG&BO8WNTp{j zB@Ck+vnD1;cRn&Kk&L9LlP-l6ny{pyVc?^3t$PI&Q{$5q1p2R73Yw3y-Gis(uVScHd!ass?a>^lRTxsbh4BkkOjDx)+>K&N z-geND&0G{JFxx&{btM}p;-8!^)o zU?r6Lz*K-eFY<$DbDW7s=Ni>f;TOkW#?aE%=unl8{N+XKtn-Uvp4 zlewB%Y6A4BkUBrW8!l4D%R=B;0Wo5;TUV&i6GK%#5aTChWfaqNqR!lL1ramrAu0XN zpD`3WDxG{&Dbc<#9jHTtL&>oEEKO@D<6|4BN^yoNftGZ_Xyx2 z9Ui2($17P95)Km;mAfqN@k*A28VlcY6==EDIaP!8+2`Ct@>CqSa0uTD$UUR`lEkT` zB~p4OS|+&5%1(PB+NB6yHg=G1*o-i4sl2@@posE_4Vq3iqi?i51vfxVHlH z4q{oMSmRC2>|9{lUX>*lgQ1^H7e_5sG6pZw3G@{W?lypNc@3ka7BLVhW==nXVGP~* z3p|+Vcd}8%eH7fxK{>kE>cG2AvAA+BX<;TT7B`ZOa`SAlyap@tVzJ%9eoH`cwN!;0 z`;c-9t`_0T9?igQ)K^`TuQlNA1OLdK*9Jp0N#JB-qj4H-1`lmnnl`1npzbdgPH?GO zufTMUh8YpH>LeDC+VTl%WGEt@DT!n~$!&F0d}pJIqFU(2W+&O|=BMPCq0&@wD1Lpj auGG8QV)#`#TdP1~n=3_pR!KfB`+opHE)mlJ literal 0 HcmV?d00001 diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/decode.h b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/decode.h new file mode 100644 index 000000000..fc2a83aba --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/decode.h @@ -0,0 +1,488 @@ +// Copyright 2010 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// Main decoding functions for WebP images. +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_DECODE_H_ +#define WEBP_WEBP_DECODE_H_ + +#include "./types.h" + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +#define WEBP_DECODER_ABI_VERSION 0x0201 // MAJOR(8b) + MINOR(8b) + +// Note: forward declaring enumerations is not allowed in (strict) C and C++, +// the types are left here for reference. +// typedef enum VP8StatusCode VP8StatusCode; +// typedef enum WEBP_CSP_MODE WEBP_CSP_MODE; +typedef struct WebPRGBABuffer WebPRGBABuffer; +typedef struct WebPYUVABuffer WebPYUVABuffer; +typedef struct WebPDecBuffer WebPDecBuffer; +typedef struct WebPIDecoder WebPIDecoder; +typedef struct WebPBitstreamFeatures WebPBitstreamFeatures; +typedef struct WebPDecoderOptions WebPDecoderOptions; +typedef struct WebPDecoderConfig WebPDecoderConfig; + +// Return the decoder's version number, packed in hexadecimal using 8bits for +// each of major/minor/revision. E.g: v2.5.7 is 0x020507. +WEBP_EXTERN(int) WebPGetDecoderVersion(void); + +// Retrieve basic header information: width, height. +// This function will also validate the header and return 0 in +// case of formatting error. +// Pointers 'width' and 'height' can be passed NULL if deemed irrelevant. +WEBP_EXTERN(int) WebPGetInfo(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Decodes WebP images pointed to by 'data' and returns RGBA samples, along +// with the dimensions in *width and *height. The ordering of samples in +// memory is R, G, B, A, R, G, B, A... in scan order (endian-independent). +// The returned pointer should be deleted calling free(). +// Returns NULL in case of error. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBA(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning A, R, G, B, A, R, G, B... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeARGB(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning B, G, R, A, B, G, R, A... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeBGRA(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGBA, but returning R, G, B, R, G, B... ordered data. +// If the bitstream contains transparency, it is ignored. +WEBP_EXTERN(uint8_t*) WebPDecodeRGB(const uint8_t* data, size_t data_size, + int* width, int* height); + +// Same as WebPDecodeRGB, but returning B, G, R, B, G, R... ordered data. +WEBP_EXTERN(uint8_t*) WebPDecodeBGR(const uint8_t* data, size_t data_size, + int* width, int* height); + + +// Decode WebP images pointed to by 'data' to Y'UV format(*). The pointer +// returned is the Y samples buffer. Upon return, *u and *v will point to +// the U and V chroma data. These U and V buffers need NOT be free()'d, +// unlike the returned Y luma one. The dimension of the U and V planes +// are both (*width + 1) / 2 and (*height + 1)/ 2. +// Upon return, the Y buffer has a stride returned as '*stride', while U and V +// have a common stride returned as '*uv_stride'. +// Return NULL in case of error. +// (*) Also named Y'CbCr. See: http://en.wikipedia.org/wiki/YCbCr +WEBP_EXTERN(uint8_t*) WebPDecodeYUV(const uint8_t* data, size_t data_size, + int* width, int* height, + uint8_t** u, uint8_t** v, + int* stride, int* uv_stride); + +// These five functions are variants of the above ones, that decode the image +// directly into a pre-allocated buffer 'output_buffer'. The maximum storage +// available in this buffer is indicated by 'output_buffer_size'. If this +// storage is not sufficient (or an error occurred), NULL is returned. +// Otherwise, output_buffer is returned, for convenience. +// The parameter 'output_stride' specifies the distance (in bytes) +// between scanlines. Hence, output_buffer_size is expected to be at least +// output_stride x picture-height. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBAInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeARGBInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeBGRAInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// RGB and BGR variants. Here too the transparency information, if present, +// will be dropped and ignored. +WEBP_EXTERN(uint8_t*) WebPDecodeRGBInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); +WEBP_EXTERN(uint8_t*) WebPDecodeBGRInto( + const uint8_t* data, size_t data_size, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// WebPDecodeYUVInto() is a variant of WebPDecodeYUV() that operates directly +// into pre-allocated luma/chroma plane buffers. This function requires the +// strides to be passed: one for the luma plane and one for each of the +// chroma ones. The size of each plane buffer is passed as 'luma_size', +// 'u_size' and 'v_size' respectively. +// Pointer to the luma plane ('*luma') is returned or NULL if an error occurred +// during decoding (or because some buffers were found to be too small). +WEBP_EXTERN(uint8_t*) WebPDecodeYUVInto( + const uint8_t* data, size_t data_size, + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride); + +//------------------------------------------------------------------------------ +// Output colorspaces and buffer + +// Colorspaces +// Note: the naming describes the byte-ordering of packed samples in memory. +// For instance, MODE_BGRA relates to samples ordered as B,G,R,A,B,G,R,A,... +// Non-capital names (e.g.:MODE_Argb) relates to pre-multiplied RGB channels. +// RGBA-4444 and RGB-565 colorspaces are represented by following byte-order: +// RGBA-4444: [r3 r2 r1 r0 g3 g2 g1 g0], [b3 b2 b1 b0 a3 a2 a1 a0], ... +// RGB-565: [r4 r3 r2 r1 r0 g5 g4 g3], [g2 g1 g0 b4 b3 b2 b1 b0], ... +// In the case WEBP_SWAP_16BITS_CSP is defined, the bytes are swapped for +// these two modes: +// RGBA-4444: [b3 b2 b1 b0 a3 a2 a1 a0], [r3 r2 r1 r0 g3 g2 g1 g0], ... +// RGB-565: [g2 g1 g0 b4 b3 b2 b1 b0], [r4 r3 r2 r1 r0 g5 g4 g3], ... + +typedef enum WEBP_CSP_MODE { + MODE_RGB = 0, MODE_RGBA = 1, + MODE_BGR = 2, MODE_BGRA = 3, + MODE_ARGB = 4, MODE_RGBA_4444 = 5, + MODE_RGB_565 = 6, + // RGB-premultiplied transparent modes (alpha value is preserved) + MODE_rgbA = 7, + MODE_bgrA = 8, + MODE_Argb = 9, + MODE_rgbA_4444 = 10, + // YUV modes must come after RGB ones. + MODE_YUV = 11, MODE_YUVA = 12, // yuv 4:2:0 + MODE_LAST = 13 +} WEBP_CSP_MODE; + +// Some useful macros: +static WEBP_INLINE int WebPIsPremultipliedMode(WEBP_CSP_MODE mode) { + return (mode == MODE_rgbA || mode == MODE_bgrA || mode == MODE_Argb || + mode == MODE_rgbA_4444); +} + +static WEBP_INLINE int WebPIsAlphaMode(WEBP_CSP_MODE mode) { + return (mode == MODE_RGBA || mode == MODE_BGRA || mode == MODE_ARGB || + mode == MODE_RGBA_4444 || mode == MODE_YUVA || + WebPIsPremultipliedMode(mode)); +} + +static WEBP_INLINE int WebPIsRGBMode(WEBP_CSP_MODE mode) { + return (mode < MODE_YUV); +} + +//------------------------------------------------------------------------------ +// WebPDecBuffer: Generic structure for describing the output sample buffer. + +struct WebPRGBABuffer { // view as RGBA + uint8_t* rgba; // pointer to RGBA samples + int stride; // stride in bytes from one scanline to the next. + size_t size; // total size of the *rgba buffer. +}; + +struct WebPYUVABuffer { // view as YUVA + uint8_t* y, *u, *v, *a; // pointer to luma, chroma U/V, alpha samples + int y_stride; // luma stride + int u_stride, v_stride; // chroma strides + int a_stride; // alpha stride + size_t y_size; // luma plane size + size_t u_size, v_size; // chroma planes size + size_t a_size; // alpha-plane size +}; + +// Output buffer +struct WebPDecBuffer { + WEBP_CSP_MODE colorspace; // Colorspace. + int width, height; // Dimensions. + int is_external_memory; // If true, 'internal_memory' pointer is not used. + union { + WebPRGBABuffer RGBA; + WebPYUVABuffer YUVA; + } u; // Nameless union of buffer parameters. + uint32_t pad[4]; // padding for later use + + uint8_t* private_memory; // Internally allocated memory (only when + // is_external_memory is false). Should not be used + // externally, but accessed via the buffer union. +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPInitDecBufferInternal(WebPDecBuffer*, int); + +// Initialize the structure as empty. Must be called before any other use. +// Returns false in case of version mismatch +static WEBP_INLINE int WebPInitDecBuffer(WebPDecBuffer* buffer) { + return WebPInitDecBufferInternal(buffer, WEBP_DECODER_ABI_VERSION); +} + +// Free any memory associated with the buffer. Must always be called last. +// Note: doesn't free the 'buffer' structure itself. +WEBP_EXTERN(void) WebPFreeDecBuffer(WebPDecBuffer* buffer); + +//------------------------------------------------------------------------------ +// Enumeration of the status codes + +typedef enum VP8StatusCode { + VP8_STATUS_OK = 0, + VP8_STATUS_OUT_OF_MEMORY, + VP8_STATUS_INVALID_PARAM, + VP8_STATUS_BITSTREAM_ERROR, + VP8_STATUS_UNSUPPORTED_FEATURE, + VP8_STATUS_SUSPENDED, + VP8_STATUS_USER_ABORT, + VP8_STATUS_NOT_ENOUGH_DATA +} VP8StatusCode; + +//------------------------------------------------------------------------------ +// Incremental decoding +// +// This API allows streamlined decoding of partial data. +// Picture can be incrementally decoded as data become available thanks to the +// WebPIDecoder object. This object can be left in a SUSPENDED state if the +// picture is only partially decoded, pending additional input. +// Code example: +// +// WebPInitDecBuffer(&buffer); +// buffer.colorspace = mode; +// ... +// WebPIDecoder* idec = WebPINewDecoder(&buffer); +// while (has_more_data) { +// // ... (get additional data) +// status = WebPIAppend(idec, new_data, new_data_size); +// if (status != VP8_STATUS_SUSPENDED || +// break; +// } +// +// // The above call decodes the current available buffer. +// // Part of the image can now be refreshed by calling to +// // WebPIDecGetRGB()/WebPIDecGetYUVA() etc. +// } +// WebPIDelete(idec); + +// Creates a new incremental decoder with the supplied buffer parameter. +// This output_buffer can be passed NULL, in which case a default output buffer +// is used (with MODE_RGB). Otherwise, an internal reference to 'output_buffer' +// is kept, which means that the lifespan of 'output_buffer' must be larger than +// that of the returned WebPIDecoder object. +// The supplied 'output_buffer' content MUST NOT be changed between calls to +// WebPIAppend() or WebPIUpdate() unless 'output_buffer.is_external_memory' is +// set to 1. In such a case, it is allowed to modify the pointers, size and +// stride of output_buffer.u.RGBA or output_buffer.u.YUVA, provided they remain +// within valid bounds. +// All other fields of WebPDecBuffer MUST remain constant between calls. +// Returns NULL if the allocation failed. +WEBP_EXTERN(WebPIDecoder*) WebPINewDecoder(WebPDecBuffer* output_buffer); + +// This function allocates and initializes an incremental-decoder object, which +// will output the RGB/A samples specified by 'csp' into a preallocated +// buffer 'output_buffer'. The size of this buffer is at least +// 'output_buffer_size' and the stride (distance in bytes between two scanlines) +// is specified by 'output_stride'. +// Additionally, output_buffer can be passed NULL in which case the output +// buffer will be allocated automatically when the decoding starts. The +// colorspace 'csp' is taken into account for allocating this buffer. All other +// parameters are ignored. +// Returns NULL if the allocation failed, or if some parameters are invalid. +WEBP_EXTERN(WebPIDecoder*) WebPINewRGB( + WEBP_CSP_MODE csp, + uint8_t* output_buffer, size_t output_buffer_size, int output_stride); + +// This function allocates and initializes an incremental-decoder object, which +// will output the raw luma/chroma samples into a preallocated planes if +// supplied. The luma plane is specified by its pointer 'luma', its size +// 'luma_size' and its stride 'luma_stride'. Similarly, the chroma-u plane +// is specified by the 'u', 'u_size' and 'u_stride' parameters, and the chroma-v +// plane by 'v' and 'v_size'. And same for the alpha-plane. The 'a' pointer +// can be pass NULL in case one is not interested in the transparency plane. +// Conversely, 'luma' can be passed NULL if no preallocated planes are supplied. +// In this case, the output buffer will be automatically allocated (using +// MODE_YUVA) when decoding starts. All parameters are then ignored. +// Returns NULL if the allocation failed or if a parameter is invalid. +WEBP_EXTERN(WebPIDecoder*) WebPINewYUVA( + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride, + uint8_t* a, size_t a_size, int a_stride); + +// Deprecated version of the above, without the alpha plane. +// Kept for backward compatibility. +WEBP_EXTERN(WebPIDecoder*) WebPINewYUV( + uint8_t* luma, size_t luma_size, int luma_stride, + uint8_t* u, size_t u_size, int u_stride, + uint8_t* v, size_t v_size, int v_stride); + +// Deletes the WebPIDecoder object and associated memory. Must always be called +// if WebPINewDecoder, WebPINewRGB or WebPINewYUV succeeded. +WEBP_EXTERN(void) WebPIDelete(WebPIDecoder* idec); + +// Copies and decodes the next available data. Returns VP8_STATUS_OK when +// the image is successfully decoded. Returns VP8_STATUS_SUSPENDED when more +// data is expected. Returns error in other cases. +WEBP_EXTERN(VP8StatusCode) WebPIAppend( + WebPIDecoder* idec, const uint8_t* data, size_t data_size); + +// A variant of the above function to be used when data buffer contains +// partial data from the beginning. In this case data buffer is not copied +// to the internal memory. +// Note that the value of the 'data' pointer can change between calls to +// WebPIUpdate, for instance when the data buffer is resized to fit larger data. +WEBP_EXTERN(VP8StatusCode) WebPIUpdate( + WebPIDecoder* idec, const uint8_t* data, size_t data_size); + +// Returns the RGB/A image decoded so far. Returns NULL if output params +// are not initialized yet. The RGB/A output type corresponds to the colorspace +// specified during call to WebPINewDecoder() or WebPINewRGB(). +// *last_y is the index of last decoded row in raster scan order. Some pointers +// (*last_y, *width etc.) can be NULL if corresponding information is not +// needed. +WEBP_EXTERN(uint8_t*) WebPIDecGetRGB( + const WebPIDecoder* idec, int* last_y, + int* width, int* height, int* stride); + +// Same as above function to get a YUVA image. Returns pointer to the luma +// plane or NULL in case of error. If there is no alpha information +// the alpha pointer '*a' will be returned NULL. +WEBP_EXTERN(uint8_t*) WebPIDecGetYUVA( + const WebPIDecoder* idec, int* last_y, + uint8_t** u, uint8_t** v, uint8_t** a, + int* width, int* height, int* stride, int* uv_stride, int* a_stride); + +// Deprecated alpha-less version of WebPIDecGetYUVA(): it will ignore the +// alpha information (if present). Kept for backward compatibility. +static WEBP_INLINE uint8_t* WebPIDecGetYUV( + const WebPIDecoder* idec, int* last_y, uint8_t** u, uint8_t** v, + int* width, int* height, int* stride, int* uv_stride) { + return WebPIDecGetYUVA(idec, last_y, u, v, NULL, width, height, + stride, uv_stride, NULL); +} + +// Generic call to retrieve information about the displayable area. +// If non NULL, the left/right/width/height pointers are filled with the visible +// rectangular area so far. +// Returns NULL in case the incremental decoder object is in an invalid state. +// Otherwise returns the pointer to the internal representation. This structure +// is read-only, tied to WebPIDecoder's lifespan and should not be modified. +WEBP_EXTERN(const WebPDecBuffer*) WebPIDecodedArea( + const WebPIDecoder* idec, int* left, int* top, int* width, int* height); + +//------------------------------------------------------------------------------ +// Advanced decoding parametrization +// +// Code sample for using the advanced decoding API +/* + // A) Init a configuration object + WebPDecoderConfig config; + CHECK(WebPInitDecoderConfig(&config)); + + // B) optional: retrieve the bitstream's features. + CHECK(WebPGetFeatures(data, data_size, &config.input) == VP8_STATUS_OK); + + // C) Adjust 'config', if needed + config.no_fancy_upsampling = 1; + config.output.colorspace = MODE_BGRA; + // etc. + + // Note that you can also make config.output point to an externally + // supplied memory buffer, provided it's big enough to store the decoded + // picture. Otherwise, config.output will just be used to allocate memory + // and store the decoded picture. + + // D) Decode! + CHECK(WebPDecode(data, data_size, &config) == VP8_STATUS_OK); + + // E) Decoded image is now in config.output (and config.output.u.RGBA) + + // F) Reclaim memory allocated in config's object. It's safe to call + // this function even if the memory is external and wasn't allocated + // by WebPDecode(). + WebPFreeDecBuffer(&config.output); +*/ + +// Features gathered from the bitstream +struct WebPBitstreamFeatures { + int width; // Width in pixels, as read from the bitstream. + int height; // Height in pixels, as read from the bitstream. + int has_alpha; // True if the bitstream contains an alpha channel. + int has_animation; // True if the bitstream is an animation. + + // Unused for now: + int bitstream_version; // should be 0 for now. TODO(later) + int no_incremental_decoding; // if true, using incremental decoding is not + // recommended. + int rotate; // TODO(later) + int uv_sampling; // should be 0 for now. TODO(later) + uint32_t pad[2]; // padding for later use +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(VP8StatusCode) WebPGetFeaturesInternal( + const uint8_t*, size_t, WebPBitstreamFeatures*, int); + +// Retrieve features from the bitstream. The *features structure is filled +// with information gathered from the bitstream. +// Returns VP8_STATUS_OK when the features are successfully retrieved. Returns +// VP8_STATUS_NOT_ENOUGH_DATA when more data is needed to retrieve the +// features from headers. Returns error in other cases. +static WEBP_INLINE VP8StatusCode WebPGetFeatures( + const uint8_t* data, size_t data_size, + WebPBitstreamFeatures* features) { + return WebPGetFeaturesInternal(data, data_size, features, + WEBP_DECODER_ABI_VERSION); +} + +// Decoding options +struct WebPDecoderOptions { + int bypass_filtering; // if true, skip the in-loop filtering + int no_fancy_upsampling; // if true, use faster pointwise upsampler + int use_cropping; // if true, cropping is applied _first_ + int crop_left, crop_top; // top-left position for cropping. + // Will be snapped to even values. + int crop_width, crop_height; // dimension of the cropping area + int use_scaling; // if true, scaling is applied _afterward_ + int scaled_width, scaled_height; // final resolution + int use_threads; // if true, use multi-threaded decoding + + // Unused for now: + int force_rotation; // forced rotation (to be applied _last_) + int no_enhancement; // if true, discard enhancement layer + uint32_t pad[6]; // padding for later use +}; + +// Main object storing the configuration for advanced decoding. +struct WebPDecoderConfig { + WebPBitstreamFeatures input; // Immutable bitstream features (optional) + WebPDecBuffer output; // Output buffer (can point to external mem) + WebPDecoderOptions options; // Decoding options +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPInitDecoderConfigInternal(WebPDecoderConfig*, int); + +// Initialize the configuration as empty. This function must always be +// called first, unless WebPGetFeatures() is to be called. +// Returns false in case of mismatched version. +static WEBP_INLINE int WebPInitDecoderConfig(WebPDecoderConfig* config) { + return WebPInitDecoderConfigInternal(config, WEBP_DECODER_ABI_VERSION); +} + +// Instantiate a new incremental decoder object with the requested +// configuration. The bitstream can be passed using 'data' and 'data_size' +// parameter, in which case the features will be parsed and stored into +// config->input. Otherwise, 'data' can be NULL and no parsing will occur. +// Note that 'config' can be NULL too, in which case a default configuration +// is used. +// The return WebPIDecoder object must always be deleted calling WebPIDelete(). +// Returns NULL in case of error (and config->status will then reflect +// the error condition). +WEBP_EXTERN(WebPIDecoder*) WebPIDecode(const uint8_t* data, size_t data_size, + WebPDecoderConfig* config); + +// Non-incremental version. This version decodes the full data at once, taking +// 'config' into account. Returns decoding status (which should be VP8_STATUS_OK +// if the decoding was successful). +WEBP_EXTERN(VP8StatusCode) WebPDecode(const uint8_t* data, size_t data_size, + WebPDecoderConfig* config); + +#if defined(__cplusplus) || defined(c_plusplus) +} // extern "C" +#endif + +#endif /* WEBP_WEBP_DECODE_H_ */ diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/encode.h b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/encode.h new file mode 100644 index 000000000..d635fcf0e --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/encode.h @@ -0,0 +1,485 @@ +// Copyright 2011 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// WebP encoder: main interface +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_ENCODE_H_ +#define WEBP_WEBP_ENCODE_H_ + +#include "./types.h" + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +#define WEBP_ENCODER_ABI_VERSION 0x0201 // MAJOR(8b) + MINOR(8b) + +// Note: forward declaring enumerations is not allowed in (strict) C and C++, +// the types are left here for reference. +// typedef enum WebPImageHint WebPImageHint; +// typedef enum WebPEncCSP WebPEncCSP; +// typedef enum WebPPreset WebPPreset; +// typedef enum WebPEncodingError WebPEncodingError; +typedef struct WebPConfig WebPConfig; +typedef struct WebPPicture WebPPicture; // main structure for I/O +typedef struct WebPAuxStats WebPAuxStats; +typedef struct WebPMemoryWriter WebPMemoryWriter; + +// Return the encoder's version number, packed in hexadecimal using 8bits for +// each of major/minor/revision. E.g: v2.5.7 is 0x020507. +WEBP_EXTERN(int) WebPGetEncoderVersion(void); + +//------------------------------------------------------------------------------ +// One-stop-shop call! No questions asked: + +// Returns the size of the compressed data (pointed to by *output), or 0 if +// an error occurred. The compressed data must be released by the caller +// using the call 'free(*output)'. +// These functions compress using the lossy format, and the quality_factor +// can go from 0 (smaller output, lower quality) to 100 (best quality, +// larger output). +WEBP_EXTERN(size_t) WebPEncodeRGB(const uint8_t* rgb, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeBGR(const uint8_t* bgr, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeRGBA(const uint8_t* rgba, + int width, int height, int stride, + float quality_factor, uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeBGRA(const uint8_t* bgra, + int width, int height, int stride, + float quality_factor, uint8_t** output); + +// These functions are the equivalent of the above, but compressing in a +// lossless manner. Files are usually larger than lossy format, but will +// not suffer any compression loss. +WEBP_EXTERN(size_t) WebPEncodeLosslessRGB(const uint8_t* rgb, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessBGR(const uint8_t* bgr, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessRGBA(const uint8_t* rgba, + int width, int height, int stride, + uint8_t** output); +WEBP_EXTERN(size_t) WebPEncodeLosslessBGRA(const uint8_t* bgra, + int width, int height, int stride, + uint8_t** output); + +//------------------------------------------------------------------------------ +// Coding parameters + +// Image characteristics hint for the underlying encoder. +typedef enum WebPImageHint { + WEBP_HINT_DEFAULT = 0, // default preset. + WEBP_HINT_PICTURE, // digital picture, like portrait, inner shot + WEBP_HINT_PHOTO, // outdoor photograph, with natural lighting + WEBP_HINT_GRAPH, // Discrete tone image (graph, map-tile etc). + WEBP_HINT_LAST +} WebPImageHint; + +// Compression parameters. +struct WebPConfig { + int lossless; // Lossless encoding (0=lossy(default), 1=lossless). + float quality; // between 0 (smallest file) and 100 (biggest) + int method; // quality/speed trade-off (0=fast, 6=slower-better) + + WebPImageHint image_hint; // Hint for image type (lossless only for now). + + // Parameters related to lossy compression only: + int target_size; // if non-zero, set the desired target size in bytes. + // Takes precedence over the 'compression' parameter. + float target_PSNR; // if non-zero, specifies the minimal distortion to + // try to achieve. Takes precedence over target_size. + int segments; // maximum number of segments to use, in [1..4] + int sns_strength; // Spatial Noise Shaping. 0=off, 100=maximum. + int filter_strength; // range: [0 = off .. 100 = strongest] + int filter_sharpness; // range: [0 = off .. 7 = least sharp] + int filter_type; // filtering type: 0 = simple, 1 = strong (only used + // if filter_strength > 0 or autofilter > 0) + int autofilter; // Auto adjust filter's strength [0 = off, 1 = on] + int alpha_compression; // Algorithm for encoding the alpha plane (0 = none, + // 1 = compressed with WebP lossless). Default is 1. + int alpha_filtering; // Predictive filtering method for alpha plane. + // 0: none, 1: fast, 2: best. Default if 1. + int alpha_quality; // Between 0 (smallest size) and 100 (lossless). + // Default is 100. + int pass; // number of entropy-analysis passes (in [1..10]). + + int show_compressed; // if true, export the compressed picture back. + // In-loop filtering is not applied. + int preprocessing; // preprocessing filter (0=none, 1=segment-smooth) + int partitions; // log2(number of token partitions) in [0..3]. Default + // is set to 0 for easier progressive decoding. + int partition_limit; // quality degradation allowed to fit the 512k limit + // on prediction modes coding (0: no degradation, + // 100: maximum possible degradation). + int emulate_jpeg_size; // If true, compression parameters will be remapped + // to better match the expected output size from + // JPEG compression. Generally, the output size will + // be similar but the degradation will be lower. + int thread_level; // If non-zero, try and use multi-threaded encoding. + int low_memory; // If set, reduce memory usage (but increase CPU use). + + uint32_t pad[5]; // padding for later use +}; + +// Enumerate some predefined settings for WebPConfig, depending on the type +// of source picture. These presets are used when calling WebPConfigPreset(). +typedef enum WebPPreset { + WEBP_PRESET_DEFAULT = 0, // default preset. + WEBP_PRESET_PICTURE, // digital picture, like portrait, inner shot + WEBP_PRESET_PHOTO, // outdoor photograph, with natural lighting + WEBP_PRESET_DRAWING, // hand or line drawing, with high-contrast details + WEBP_PRESET_ICON, // small-sized colorful images + WEBP_PRESET_TEXT // text-like +} WebPPreset; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPConfigInitInternal(WebPConfig*, WebPPreset, float, int); + +// Should always be called, to initialize a fresh WebPConfig structure before +// modification. Returns false in case of version mismatch. WebPConfigInit() +// must have succeeded before using the 'config' object. +// Note that the default values are lossless=0 and quality=75. +static WEBP_INLINE int WebPConfigInit(WebPConfig* config) { + return WebPConfigInitInternal(config, WEBP_PRESET_DEFAULT, 75.f, + WEBP_ENCODER_ABI_VERSION); +} + +// This function will initialize the configuration according to a predefined +// set of parameters (referred to by 'preset') and a given quality factor. +// This function can be called as a replacement to WebPConfigInit(). Will +// return false in case of error. +static WEBP_INLINE int WebPConfigPreset(WebPConfig* config, + WebPPreset preset, float quality) { + return WebPConfigInitInternal(config, preset, quality, + WEBP_ENCODER_ABI_VERSION); +} + +// Returns true if 'config' is non-NULL and all configuration parameters are +// within their valid ranges. +WEBP_EXTERN(int) WebPValidateConfig(const WebPConfig* config); + +//------------------------------------------------------------------------------ +// Input / Output +// Structure for storing auxiliary statistics (mostly for lossy encoding). + +struct WebPAuxStats { + int coded_size; // final size + + float PSNR[5]; // peak-signal-to-noise ratio for Y/U/V/All/Alpha + int block_count[3]; // number of intra4/intra16/skipped macroblocks + int header_bytes[2]; // approximate number of bytes spent for header + // and mode-partition #0 + int residual_bytes[3][4]; // approximate number of bytes spent for + // DC/AC/uv coefficients for each (0..3) segments. + int segment_size[4]; // number of macroblocks in each segments + int segment_quant[4]; // quantizer values for each segments + int segment_level[4]; // filtering strength for each segments [0..63] + + int alpha_data_size; // size of the transparency data + int layer_data_size; // size of the enhancement layer data + + // lossless encoder statistics + uint32_t lossless_features; // bit0:predictor bit1:cross-color transform + // bit2:subtract-green bit3:color indexing + int histogram_bits; // number of precision bits of histogram + int transform_bits; // precision bits for transform + int cache_bits; // number of bits for color cache lookup + int palette_size; // number of color in palette, if used + int lossless_size; // final lossless size + + uint32_t pad[4]; // padding for later use +}; + +// Signature for output function. Should return true if writing was successful. +// data/data_size is the segment of data to write, and 'picture' is for +// reference (and so one can make use of picture->custom_ptr). +typedef int (*WebPWriterFunction)(const uint8_t* data, size_t data_size, + const WebPPicture* picture); + +// WebPMemoryWrite: a special WebPWriterFunction that writes to memory using +// the following WebPMemoryWriter object (to be set as a custom_ptr). +struct WebPMemoryWriter { + uint8_t* mem; // final buffer (of size 'max_size', larger than 'size'). + size_t size; // final size + size_t max_size; // total capacity + uint32_t pad[1]; // padding for later use +}; + +// The following must be called first before any use. +WEBP_EXTERN(void) WebPMemoryWriterInit(WebPMemoryWriter* writer); + +// The custom writer to be used with WebPMemoryWriter as custom_ptr. Upon +// completion, writer.mem and writer.size will hold the coded data. +// writer.mem must be freed using the call 'free(writer.mem)'. +WEBP_EXTERN(int) WebPMemoryWrite(const uint8_t* data, size_t data_size, + const WebPPicture* picture); + +// Progress hook, called from time to time to report progress. It can return +// false to request an abort of the encoding process, or true otherwise if +// everything is OK. +typedef int (*WebPProgressHook)(int percent, const WebPPicture* picture); + +// Color spaces. +typedef enum WebPEncCSP { + // chroma sampling + WEBP_YUV420 = 0, // 4:2:0 + WEBP_YUV422 = 1, // 4:2:2 + WEBP_YUV444 = 2, // 4:4:4 + WEBP_YUV400 = 3, // grayscale + WEBP_CSP_UV_MASK = 3, // bit-mask to get the UV sampling factors + // alpha channel variants + WEBP_YUV420A = 4, + WEBP_YUV422A = 5, + WEBP_YUV444A = 6, + WEBP_YUV400A = 7, // grayscale + alpha + WEBP_CSP_ALPHA_BIT = 4 // bit that is set if alpha is present +} WebPEncCSP; + +// Encoding error conditions. +typedef enum WebPEncodingError { + VP8_ENC_OK = 0, + VP8_ENC_ERROR_OUT_OF_MEMORY, // memory error allocating objects + VP8_ENC_ERROR_BITSTREAM_OUT_OF_MEMORY, // memory error while flushing bits + VP8_ENC_ERROR_NULL_PARAMETER, // a pointer parameter is NULL + VP8_ENC_ERROR_INVALID_CONFIGURATION, // configuration is invalid + VP8_ENC_ERROR_BAD_DIMENSION, // picture has invalid width/height + VP8_ENC_ERROR_PARTITION0_OVERFLOW, // partition is bigger than 512k + VP8_ENC_ERROR_PARTITION_OVERFLOW, // partition is bigger than 16M + VP8_ENC_ERROR_BAD_WRITE, // error while flushing bytes + VP8_ENC_ERROR_FILE_TOO_BIG, // file is bigger than 4G + VP8_ENC_ERROR_USER_ABORT, // abort request by user + VP8_ENC_ERROR_LAST // list terminator. always last. +} WebPEncodingError; + +// maximum width/height allowed (inclusive), in pixels +#define WEBP_MAX_DIMENSION 16383 + +// Main exchange structure (input samples, output bytes, statistics) +struct WebPPicture { + // INPUT + ////////////// + // Main flag for encoder selecting between ARGB or YUV input. + // It is recommended to use ARGB input (*argb, argb_stride) for lossless + // compression, and YUV input (*y, *u, *v, etc.) for lossy compression + // since these are the respective native colorspace for these formats. + int use_argb; + + // YUV input (mostly used for input to lossy compression) + WebPEncCSP colorspace; // colorspace: should be YUV420 for now (=Y'CbCr). + int width, height; // dimensions (less or equal to WEBP_MAX_DIMENSION) + uint8_t *y, *u, *v; // pointers to luma/chroma planes. + int y_stride, uv_stride; // luma/chroma strides. + uint8_t* a; // pointer to the alpha plane + int a_stride; // stride of the alpha plane + uint32_t pad1[2]; // padding for later use + + // ARGB input (mostly used for input to lossless compression) + uint32_t* argb; // Pointer to argb (32 bit) plane. + int argb_stride; // This is stride in pixels units, not bytes. + uint32_t pad2[3]; // padding for later use + + // OUTPUT + /////////////// + // Byte-emission hook, to store compressed bytes as they are ready. + WebPWriterFunction writer; // can be NULL + void* custom_ptr; // can be used by the writer. + + // map for extra information (only for lossy compression mode) + int extra_info_type; // 1: intra type, 2: segment, 3: quant + // 4: intra-16 prediction mode, + // 5: chroma prediction mode, + // 6: bit cost, 7: distortion + uint8_t* extra_info; // if not NULL, points to an array of size + // ((width + 15) / 16) * ((height + 15) / 16) that + // will be filled with a macroblock map, depending + // on extra_info_type. + + // STATS AND REPORTS + /////////////////////////// + // Pointer to side statistics (updated only if not NULL) + WebPAuxStats* stats; + + // Error code for the latest error encountered during encoding + WebPEncodingError error_code; + + // If not NULL, report progress during encoding. + WebPProgressHook progress_hook; + + void* user_data; // this field is free to be set to any value and + // used during callbacks (like progress-report e.g.). + + uint32_t pad3[3]; // padding for later use + + // Unused for now: original samples (for non-YUV420 modes) + uint8_t *u0, *v0; + int uv0_stride; + + uint32_t pad4[7]; // padding for later use + + // PRIVATE FIELDS + //////////////////// + void* memory_; // row chunk of memory for yuva planes + void* memory_argb_; // and for argb too. + void* pad5[2]; // padding for later use +}; + +// Internal, version-checked, entry point +WEBP_EXTERN(int) WebPPictureInitInternal(WebPPicture*, int); + +// Should always be called, to initialize the structure. Returns false in case +// of version mismatch. WebPPictureInit() must have succeeded before using the +// 'picture' object. +// Note that, by default, use_argb is false and colorspace is WEBP_YUV420. +static WEBP_INLINE int WebPPictureInit(WebPPicture* picture) { + return WebPPictureInitInternal(picture, WEBP_ENCODER_ABI_VERSION); +} + +//------------------------------------------------------------------------------ +// WebPPicture utils + +// Convenience allocation / deallocation based on picture->width/height: +// Allocate y/u/v buffers as per colorspace/width/height specification. +// Note! This function will free the previous buffer if needed. +// Returns false in case of memory error. +WEBP_EXTERN(int) WebPPictureAlloc(WebPPicture* picture); + +// Release the memory allocated by WebPPictureAlloc() or WebPPictureImport*(). +// Note that this function does _not_ free the memory used by the 'picture' +// object itself. +// Besides memory (which is reclaimed) all other fields of 'picture' are +// preserved. +WEBP_EXTERN(void) WebPPictureFree(WebPPicture* picture); + +// Copy the pixels of *src into *dst, using WebPPictureAlloc. Upon return, +// *dst will fully own the copied pixels (this is not a view). +// Returns false in case of memory allocation error. +WEBP_EXTERN(int) WebPPictureCopy(const WebPPicture* src, WebPPicture* dst); + +// Compute PSNR, SSIM or LSIM distortion metric between two pictures. +// Result is in dB, stores in result[] in the Y/U/V/Alpha/All order. +// Returns false in case of error (src and ref don't have same dimension, ...) +// Warning: this function is rather CPU-intensive. +WEBP_EXTERN(int) WebPPictureDistortion( + const WebPPicture* src, const WebPPicture* ref, + int metric_type, // 0 = PSNR, 1 = SSIM, 2 = LSIM + float result[5]); + +// self-crops a picture to the rectangle defined by top/left/width/height. +// Returns false in case of memory allocation error, or if the rectangle is +// outside of the source picture. +// The rectangle for the view is defined by the top-left corner pixel +// coordinates (left, top) as well as its width and height. This rectangle +// must be fully be comprised inside the 'src' source picture. If the source +// picture uses the YUV420 colorspace, the top and left coordinates will be +// snapped to even values. +WEBP_EXTERN(int) WebPPictureCrop(WebPPicture* picture, + int left, int top, int width, int height); + +// Extracts a view from 'src' picture into 'dst'. The rectangle for the view +// is defined by the top-left corner pixel coordinates (left, top) as well +// as its width and height. This rectangle must be fully be comprised inside +// the 'src' source picture. If the source picture uses the YUV420 colorspace, +// the top and left coordinates will be snapped to even values. +// Picture 'src' must out-live 'dst' picture. Self-extraction of view is allowed +// ('src' equal to 'dst') as a mean of fast-cropping (but note that doing so, +// the original dimension will be lost). +// Returns false in case of memory allocation error or invalid parameters. +WEBP_EXTERN(int) WebPPictureView(const WebPPicture* src, + int left, int top, int width, int height, + WebPPicture* dst); + +// Returns true if the 'picture' is actually a view and therefore does +// not own the memory for pixels. +WEBP_EXTERN(int) WebPPictureIsView(const WebPPicture* picture); + +// Rescale a picture to new dimension width x height. +// Now gamma correction is applied. +// Returns false in case of error (invalid parameter or insufficient memory). +WEBP_EXTERN(int) WebPPictureRescale(WebPPicture* pic, int width, int height); + +// Colorspace conversion function to import RGB samples. +// Previous buffer will be free'd, if any. +// *rgb buffer should have a size of at least height * rgb_stride. +// Returns false in case of memory error. +WEBP_EXTERN(int) WebPPictureImportRGB( + WebPPicture* picture, const uint8_t* rgb, int rgb_stride); +// Same, but for RGBA buffer. +WEBP_EXTERN(int) WebPPictureImportRGBA( + WebPPicture* picture, const uint8_t* rgba, int rgba_stride); +// Same, but for RGBA buffer. Imports the RGB direct from the 32-bit format +// input buffer ignoring the alpha channel. Avoids needing to copy the data +// to a temporary 24-bit RGB buffer to import the RGB only. +WEBP_EXTERN(int) WebPPictureImportRGBX( + WebPPicture* picture, const uint8_t* rgbx, int rgbx_stride); + +// Variants of the above, but taking BGR(A|X) input. +WEBP_EXTERN(int) WebPPictureImportBGR( + WebPPicture* picture, const uint8_t* bgr, int bgr_stride); +WEBP_EXTERN(int) WebPPictureImportBGRA( + WebPPicture* picture, const uint8_t* bgra, int bgra_stride); +WEBP_EXTERN(int) WebPPictureImportBGRX( + WebPPicture* picture, const uint8_t* bgrx, int bgrx_stride); + +// Converts picture->argb data to the YUVA format specified by 'colorspace'. +// Upon return, picture->use_argb is set to false. The presence of real +// non-opaque transparent values is detected, and 'colorspace' will be +// adjusted accordingly. Note that this method is lossy. +// Returns false in case of error. +WEBP_EXTERN(int) WebPPictureARGBToYUVA(WebPPicture* picture, + WebPEncCSP colorspace); + +// Converts picture->yuv to picture->argb and sets picture->use_argb to true. +// The input format must be YUV_420 or YUV_420A. +// Note that the use of this method is discouraged if one has access to the +// raw ARGB samples, since using YUV420 is comparatively lossy. Also, the +// conversion from YUV420 to ARGB incurs a small loss too. +// Returns false in case of error. +WEBP_EXTERN(int) WebPPictureYUVAToARGB(WebPPicture* picture); + +// Helper function: given a width x height plane of YUV(A) samples +// (with stride 'stride'), clean-up the YUV samples under fully transparent +// area, to help compressibility (no guarantee, though). +WEBP_EXTERN(void) WebPCleanupTransparentArea(WebPPicture* picture); + +// Scan the picture 'picture' for the presence of non fully opaque alpha values. +// Returns true in such case. Otherwise returns false (indicating that the +// alpha plane can be ignored altogether e.g.). +WEBP_EXTERN(int) WebPPictureHasTransparency(const WebPPicture* picture); + +// Remove the transparency information (if present) by blending the color with +// the background color 'background_rgb' (specified as 24bit RGB triplet). +// After this call, all alpha values are reset to 0xff. +WEBP_EXTERN(void) WebPBlendAlpha(WebPPicture* pic, uint32_t background_rgb); + +//------------------------------------------------------------------------------ +// Main call + +// Main encoding call, after config and picture have been initialized. +// 'picture' must be less than 16384x16384 in dimension (cf WEBP_MAX_DIMENSION), +// and the 'config' object must be a valid one. +// Returns false in case of error, true otherwise. +// In case of error, picture->error_code is updated accordingly. +// 'picture' can hold the source samples in both YUV(A) or ARGB input, depending +// on the value of 'picture->use_argb'. It is highly recommended to use +// the former for lossy encoding, and the latter for lossless encoding +// (when config.lossless is true). Automatic conversion from one format to +// another is provided but they both incur some loss. +WEBP_EXTERN(int) WebPEncode(const WebPConfig* config, WebPPicture* picture); + +//------------------------------------------------------------------------------ + +#if defined(__cplusplus) || defined(c_plusplus) +} // extern "C" +#endif + +#endif /* WEBP_WEBP_ENCODE_H_ */ diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/types.h b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/types.h new file mode 100644 index 000000000..3e27190be --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Headers/webp/types.h @@ -0,0 +1,45 @@ +// Copyright 2010 Google Inc. All Rights Reserved. +// +// This code is licensed under the same terms as WebM: +// Software License Agreement: http://www.webmproject.org/license/software/ +// Additional IP Rights Grant: http://www.webmproject.org/license/additional/ +// ----------------------------------------------------------------------------- +// +// Common types +// +// Author: Skal (pascal.massimino@gmail.com) + +#ifndef WEBP_WEBP_TYPES_H_ +#define WEBP_WEBP_TYPES_H_ + +#include // for size_t + +#ifndef _MSC_VER +#include +#ifdef __STRICT_ANSI__ +#define WEBP_INLINE +#else /* __STRICT_ANSI__ */ +#define WEBP_INLINE inline +#endif +#else +typedef signed char int8_t; +typedef unsigned char uint8_t; +typedef signed short int16_t; +typedef unsigned short uint16_t; +typedef signed int int32_t; +typedef unsigned int uint32_t; +typedef unsigned long long int uint64_t; +typedef long long int int64_t; +#define WEBP_INLINE __forceinline +#endif /* _MSC_VER */ + +#ifndef WEBP_EXTERN +// This explicitly marks library functions and allows for changing the +// signature for e.g., Windows DLL builds. +#define WEBP_EXTERN(type) extern type +#endif /* WEBP_EXTERN */ + +// Macro to check ABI compatibility (same major revision number) +#define WEBP_ABI_IS_INCOMPATIBLE(a, b) (((a) >> 8) != ((b) >> 8)) + +#endif /* WEBP_WEBP_TYPES_H_ */ diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Resources/English.lproj/InfoPlist.strings b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Resources/English.lproj/InfoPlist.strings new file mode 100644 index 0000000000000000000000000000000000000000..680c8e552128626bbd177f4cd7acb55afdf00561 GIT binary patch literal 492 zcma)&OACTf6ohBpuMn3JJ(tm@pa(>Yg!aCAP^qXD_2aAWDkOwK$o1$sb7$tv^QDfO zvb0nzU#?C%=%G*ny(=|UMkiK8wWwR(3;wozx0Mw5OgY^n=zD=`!r9=NXsWR;paXEB zR`8#xmPQ=Axa;Xg$Aih%u;z}VJxVDG8*r5yhfa#KNV^YT7e_tL;0Mh(Ql-#Bb%L{mosEwjK1~XJFg=c$&zQ$d%zK>T>L!0`z5$gMQPuze literal 0 HcmV?d00001 diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Resources/Info.plist b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Resources/Info.plist new file mode 100644 index 000000000..0f80968d0 --- /dev/null +++ b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/Resources/Info.plist @@ -0,0 +1,24 @@ + + + + + CFBundleDevelopmentRegion + English + CFBundleExecutable + webp + CFBundleGetInfoString + libwebp 0.1.3 + CFBundleInfoDictionaryVersion + 6.0 + CFBundleName + webp + CFBundlePackageType + FMWK + CFBundleShortVersionString + 0.1.3 + CFBundleSignature + ???? + CFBundleVersion + 0.1.3 + + diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/webp b/src/SDL2/Xcode/Frameworks/webp.framework/Versions/Current/webp new file mode 100755 index 0000000000000000000000000000000000000000..56b1e59cc3d6858016c8e6fc0b2af08aa17a556c GIT binary patch literal 730072 zcmeFae|%KMxj()qyTAggXVI-jjS>}GB2+$rpDz9F7e9KLYAKCjY|e_%-tBN&QUya}QH6 zXe@w%$_p0Vbx-A8OZa_gKRQwOTvVnfIY83?k}&9f!GfPW5LmMK=RZw;JQWw8uXj48 zpNH|_IT*&^G+^BK^9KeHaw?3%dZ%O2jSdGr36Ed(Z@~iN=Svs={LTf7f4=ZO6gU;e zvk9l86#4Z0x_<-nSzI)?XmBaaLLt553HQ%ndZ63|3x1AyP}5NvSc3O2*PqCf;2MGh znggJQ|1DT>&yW8ZjES1daSuw;b1?3xFAEh2nu}BLIJ6&IP&a^n(DUo@c;}A;KTZO~ zN{;PfxAULYhx}^|~D4D>a_a!EK+0I)(T@6aRC52K927 zqi{*(j{}P?UwYRam6t7C^5c8&T6*7-yDy)2*OCVo1Mim?@fVc5$l(Z1!js?=uEyg@ z{Yd@09q)xe-j*|5j;^znbCKFw{au&ijnU}yD=x=uco>m%%uZH%aFoMA|L3Da+wkH1 z6tJ&&PJYSdsQrq3qBUygU~ExgZb`vA&&Tucyy5c8?jMIdkTn<-8gP$d9yb}URF>!1 z`Fo@^$K}QYOD?}>@g4O4%?~{gxa;1_re1dELwIvIzKs$DW7(xHhZjpMC;3ie`sUv^ z82APQ-(cVy419xu|G#0NT>Sm!TjrU)6Kxv#ZPM=*k3%GM`qzf;qNo6Jq|teeU)c6-cGun9=e6z!?)r^2Iu3i@b^f6-@;InUbm2o z_Hz1%NQd_7b<0$B8N8Fr+Ei{4^33X<41ERZH+q96c7@xU;;!&pO`m3%-A=P#(;xXe zwbpRL{KzS)yUhf0+L04He!c$4Ye*!@dW!Uh1U`qFjPFQ)ufEmam*?-%f3Zt%`0J8< zQ9RBqW{z{oGFy1Y*^^+;#J?^5HuAmF--Cw-pWUd4qzfYuu5otFdW>gx=$$~RT>0W> zPKR_ghMEHB%5q!G9p{ndeR#N~(JKPuT*5al(P~zAYsPsB2w?RoST?~re1}uP8Vig@ zgM>W{7U=CmPdz}rvzAa2&&X{u_e{KP!H+6-TPsHjR6^IRmCuDa<+2(MQ)=?KC<*FZbU-P_Q*o7XdZb$4=<() zhF3o53mwtd{D|JFy>fYGD50+@BM2Xy)DGvDyY)w}r?>8tT0ha_6?hTHgwe-vvmAl3 zvdk-|XN$5vYWqxrLmA`fZ5X|kqo_~Jc8OAVXm8Ewq5U_2VEs7BHzWB-Z2 zC}dU|Q%R?S9gEK-F<_x^}C*SI`pl(gum-(OuQLMj5SY=66Kx3Z!h)c9zlnM z(IY++ed2I@x;00Od_2}F9;3DOqkU_M7WrhX6}UocJ9+dIv%1$K+Ob9gqjUG7+oDCh z7C#F_aP)nBYjvOY7HUL}kJY!fX~%`XLss`_i81epW6m=B%!*DeGNxV32d$||CHk?? z1ujAIqZ;Wg=BB}v`9#rdQRGEqqnCVNmUmIkoNOZ7Ig_j`ulRva+&@lM^oSo!wtQ!5 zyTqJKasPPngDKQK!|klLwSG~QCCfSpd!+>u9W9+0*JW83XZUCpm1ZI>OWj}>kz->q z7Kvn+EOY@Y=CRY3jL6*^yN}R$Y_z`OOu}ZFPu`y`j80iJ4j2$eX~d#WR`eeIP+^!^$h`(Vu9_Zq0jBeFal)53TvtHZ|XtY$Z#)Ns8IAnDf zW>A)O>s#0FAcD+0Ftp#QmmvN1O?pF-m;>Sh!$g-1q>oD)?$D7yrdi{07^7v$Y+{h1pwkg8;acV%*KHNM^|6K2-$q9wk+|6J zxt5GSJ@gEE!2{6i{sqY>8P9moAH2XtMGv=n_|$_8L1bpB2bqz08>b%G>Oou&nPeX0 zLDnW7lhmU?J*KEfv3eA$$4vDoRS)hwFT{%7xlI+j2l!`JQr=d$&6hf$x)NQ zOLH=(dy&TcW=gY+#b&$rAA`zGifuukc3Wk_(cB70jD#~w20?&Qso-CF{ z^3UARpShtwb3=cohLYc7CIDMcZdw6}Gapju$q#Ee<+7e!MR{2)g+_v|?0ajR4iG~f zH9+&r`bYue2lAyAb1TC(br~yv-L05&QEpr7N;%PEO&>4Hy3IxpM(U`kfTXobT~?tl zcfX=9IoT^Fk1=;;*B;MC4dYWP5iUT|T04>c){mpV!O8fWn^?G3W?dt)u9I1LB5R5n z&8|&kql-o?)&TIiO~8~sHi)Dn)!*h~?K`z*Q#KQ$aY(c@2d4p4ZFBGz_4uiJELD$3 z)MKN1{7yYyP>-m3yrmu=smD?E7y;Q;+Z;SwJ-(wJSJMONF&k+r95vs<*qVb^s~X?o zN8t!6Aj5xPxh!|f=emGTtyviRoGUsBwf;SFMF$e{v0i$GBJ*101D6Hl87)|w z=1$c@o-AuQta~;5Kiv&v9M;E7_u@|xl%74v9FBDDc(g2yeW}+ec#Yo~+H2g73e835 zEsqwRy&V6dMQ5sqt{$V+V+1{#YcEHw<u%#jrxZV=L|KQ}9iN=0XW~q2$D^r$ zE|!tD*@vYj{hbM~+3Yg?ec3mdC%k&yMQ8&>^@i1%-$G$|maOizmR&Pm6pVwoPWV=Z z-+mEA9PJ;_bOtA)jQ*R>2cBk_5Sj(NoKOJM+mSdU{%ZjN6(mql1ujLMrI?D*Bz#0Z3(ZCv0kHbN@Hh7z>2I~_83|z?JA`~A zjh*;&_-$r)?cG4W6sn(Z%hP3fuQhYb_y^8XDmNj4^i}F`;_NsSXm@Bu5=*R;D=c*l z!IJSC#!&E*{|BS$Nsa0{^ixi*O&m~qKc0T~k>I5OsRxQ0NusdkO{?HY?PZ+(Em__J zz1{_`jFHRWLV$>$c}nITge@2jNnm{d7W^`>z5sxct?(saLo(CAWcW_Z`t-ao&06)f zpi8W(An9~?hP~VX7UY=eZv3HD85|FuAj_~8)$0^`^K(Kj%cR4E7(o!NNOpUIi{)+NV zavO`y9rRIDw~Ej7t$&s4CQ*+X>b#F`z>@ZFj(q466+yX<5Fj=zgZ?4cQP;$VN~GIt z;a{(BJsdgc6h@t_WyFQ5s8lWEE)+mo^hdg(3a^#5w8tU*tIZuGFR`jhFiE0ChRN)O zkjo2KBB8IjoaZhq!$*6Fuk4fI1Se3^`FG0MBf}>+r%8t2;l#@_{2?bAW%z6^vt5SA za-v>_&*Q`&WcXrEJS)TRap7lV@FPn2w?O`ZO6nOSVO9{Zw#$3<2G2SfWQ4&$hML~5 zy#*q{3_!W8yPwF=-=#McuZ4!vZMjNG1wIZ)&b5rN@*cC15DG3&XKUC0%TO%WK>I-Rg+PwDKW;ZZgteaBsm3) zEbC!7Ekoewb*}@bUkz(dVodCh^c6$r~wu&L~l42KUZaA-W>7MgU8NX`ZxXt?Yo}`JrnHO3x%ERa;Lce^AG=%em+Z_wzm+PGFEb4Eiacx zr~WtAn|~9WC!2+TlPnA7L`0b_X=R3Jm12#`vO3D_OO&mK4sF&g|ucaRIs5h%%fuX?KJ%;|^Q$4%lM9s-yL#l09&$s$PiOQaFD8mb<~0_Jt%R=yw? zQK9|EYcV)K5%;XQ#9EHkl;j*c62VHOjXGKFmKzn{Zqw%Z#A|KG<*SP29@lCz@mb%x zk>0g=Suh~*cDmMrR-v5ay{B7|lfd|_nc6I_sm;q&#fEVi(LVu(Ook%SiV-t9C&bz!c+~K9vNh2PQ|PHELT*%LX)mV z3EirJF(@wjYWI*BQRWYjzUFB{I{VlvRSMp?jg(T}II`>PNAD-as2IE8DSMag8xISk z+h8)wX_J84??Q!3v|>8PSq-fZoI022qr-kbA3Yr&dyhzUc`+6}wAtuNVyyHJUZ*~J z3l3&mt#W;_-X%7TWueN3=z2=?nb}z4H*r-5tM}P!}XXW`Bm> zuzh$2oOZ@@_%u*9T1yb-Wp1&KDnadB5jYbGedk;)U_NvYR;hE&l=v|5n!ITW z7btWXF3}!$%L=#rQL)yJk+^c-iH|ll94 zdCa9h1#Z2!sQpCVyVV)uv(P)+w3>|Y+vsk1b#oqSG}kp>LufT?(9m6>{SRH5yFZ>A z+Rx?MfZg!wUDtBCUDr`LXdo^5ZxD|g%T#74>f_H>lxH^-MLWmj30E-a3Amh`b!EO}5^f;paUV6kQ(^?9y z06h~cBJeI!;$8I7F3#f#t((D03&^P(xx}DpRT4pnvQBI6$P8Fa;*H3`VV1{20p!|> z@v!>PQ!kc8Z_T>IE^m; z+rxjm@mFge^JZ=H0<1i|zzrR$WNq6mYh5&9vK^o}*(?`Aebo*8Rf zA*NkCM^=+GTE%nBvW*V$9Pw5891$7$G#j>GO;g5>-d1aKULneh$BE0geFB}|%6eCp z@6orGx9VGs4())o{%R^=O&$YDBwiriu5YdA(Au@v#Z$z$qmQK4L9M@=ipuh)(dGLv zw*B$pFl8+tbV=|a+DDP)E!r-)C7edLb|~*PeFeGOU|W+hCd*&8iZf2qydAt-Ns?d^ z`AJ*NegpZ$D6s;LBv*jw9J~N-xQb>nP$vDJq`MJwn6wyX`{X+6y_lUT*Reh@J1c2` z%+6Lujwl@$Eo9xmUi^Z?!A7*&`kATZ4O$LgMpB66P595$2Pn-}@B+%?h3Gy6BC^M# zql5S<`*+P=vP_e_0-BF8Lct$xHZjZi-7LU}%96<#z%Y{0t)k!D<0VgT${&|SE4>&? zAnF>&^!xtLh|TDATL_Inax@Ag)07mFR?MkZD#)qsbgC)9OGGhTG zd-TW9x*j3nK~_bQBBk-A-=UnoMEOKF|Z+MgxDR2O!c!al_@_wJVB2Ib3qnKor-H#Mwfu~Lh{-j+Bd}1m9<3?vfN!C&@PS zx)t<-cB)l751M(Sm)!rA?GU_FJDG#p$)YrAfvLV^59-S}mCmLz<5hYbr6;QNM5G7$ z7(`z{qILA3{-*XHCYe(l#spcGDa(Dd7g+5PjcaM%>(|rYwVUW~cs2f}R|ipO+Taf+ z;jwGCl7>K<)IH3L3Wt zD{NEFE?7O5e-p9Yf7CMftQ5`W$q`1uP6}w0W$UGet$t&y+{RNVc+w7uvbE;1k@_QZ z0f-Bd)>=o*FLpLo9jamZ0`;|TuDE!Wj>Q%OO{fv|zYe=W%z#e}_R*8wi=p{Milg~_ko)RQsI!6fasv-;&epp|yC*G@lrl z<~Vw5pM?!Xg0+ne!J#%V6{>JlBZ8DeS}+fD3r}JNM#!_oT+OPF5|#s4VD-Gf zF#T5W1@)3w zXGHqpAAzvk2hS2*Afg1)phJ{oVV6jhWW&cNoD_6Yv6h}avSKwoZCMefXRoZNqi3HO zAy=}_${Sl&#mn+Mk=1DVnzgvX^OZFDM;WS(DJ<9&!;)9=lTU*6APy zdVlEsL?VeT<9zAFKqu6a&=QQLe8!mm$QQ&lR?_qq3V!6TBvGxeK9|-HdkvYk0npt| zq@>sFMFa72xrQcU`h}6Zk7Xu3jagF^B*>c6sRw6IOu?4SbF8^}E>XS~54R{^jfY2+ zhw<==@;Yl-o-b}jxeLHG`b4Y?eWFMHO5#(?RuAou{TcTsM6ymzqaK<;D*UGgd5GI64fJHub=DqgdSt$-{<_*(B&mY4wtVdU@AahBztY}Rf<2pM*Q(V02YcV)@pDQ;9*S<@JIjpDA|uBt9R4Lr~}N*U`8=$S_|-x!$#v! zK4J{>-^L_Hp_nHE-$|0_SFiyD=%i#({BBNyS1D#iNP$o&qk$6lq!BCWlE+%Y(u#m|VAkZ>k2QH|C?Zqr}~Vv?0FB<67nE5BucmH!OQ z+uyGMLrIo@_@9?2N49<5pz@FX^YZsl`S|<+_?!QE`FpASOH@9|5ZkHz*E7U@R9+5( z|5c)kY*x?*vnozq&aBQJ*8V53^v|Qv@%i(7K2w1no&f^Eo z{^1DKGO()-ACZV-tJf=kNs767JR^Y6KjYQtO4ie9l77kh*iP0?-?E;hXWq&#{9XDl zVzl6tSV_d7y_R!a9I}6bMI;WTqFw&+Ijq$1h6NZ0+vjUk%4LOXD5ZA0chcCF|A@v` ze5yZK#oxkS=`pJjA32<2YtsW%(Vz4I_6fQG3s1sVn;z-kc%%^;X~c2`<9{L7gP@_o zzXr3?Z6bircrK1jCAf4cAOFFx$08g{4&kxz4lv~-ST#s|jQACY0COZS{DKJJIGft# zWiRUqKbGrsFxfZ^5w~2!=xg9?-{}Y-NyY;QhLdbUd?k9IhklG&2nIchP)q7T>_Xy| z0NO~1mE~S+ujH>Kr0Xj~G$}^k1O(F>cFvpFkgo7*C+Mythk3wJyE~zCf)udY4;@ek zk|9L|*FFpWD2(fIsAjN?;5JOL;^{vG<*d5}T-PiVWaU3e~L&+JplT ziU)RSCy9||s9MfV)NjFm^SQ46$iH*H-SU^zf|IFg0>Wty*>@aL1jCaV+XMB&3O|2a zieUbvQqU%zq?FPom|$l8fV$jch2Qv!!Y>XKW~1yvDqPlMZFAiYD6}lMF=WzH#Nh!_ z{54_e^IMaUFQURsw*%ea!m1lDQQ;^GEB^w8i+kA}jqM9J813Eik=rp?ApAV@RYgUk zh!?kx!zv^%v3(X8Wo=>-q)5PTzRCn>WXVT(67cy~)R9Ms8mX{_x7uhgy+JX2=PgKM z_C>`4_>go~lWT6@Q(9Cb+(K@{~^4nx-OrjtR zW1=uRLPv}dJ4YiwezsXX3Cv(U(o}Xeo;(70=a6*Reryk7K9-7l!XtLoMYx|6ZV~eA{~Uffyucc%`xv8PB=^xc z$=wV8r7*ha+Z+6riJJ7*#BbvOkKUf6H-+TiQL;LV>Tl*UZv7rfMJ8J38dIKN6!0tvuoQR(;D|~Q5T?zvpvNCv61dPSCmhA(# zoQ)0a1I{_nn)_s_hxUm|z0(n*4p(q#7VShK<_|#?Rleo4nRu_*EpN!qeP^hD5j#&% zH@)C86e>4&9GsQOvmd>rhB`S~#fNBl;3ZLx$aHLgXUhl2X$B;4uem!TzoH8pDmdr> zNS1F2`eGGKTlOrn5vRv7AK3n)01Y4hhxtpfF^JV538uFHu}=)RkYR=1ftaV_Q}u~- z{A?!|U6k~0UQbK_r%Tvm!k;d)e0oG{_xufvw(evPKK}FY#&bdX=Qe)@p^57Kn1RZZEZFkGy9!O zFIC9y9)xV-ZV>pyBROJI2Cr$N7(d#cO@*3qJo?ah<)Qdiah;ey>}ms}M0?$Gj$2L# z`SsE)*z~6(FdN$F=_%ZHiSnNK*`NYKt{d?x)>L2|bKcE{uUnSRm4&xzuQ|)R^L7PB zlZOC?FzSrLAFU1H7IZ3yaQ7R=n5}Qc4pgBRyM3T`Yi@@2DwHQeC7`CsTggYp=Q#2! zfCvvPT)XNVoV!|eUGSqm_j}>%^oDmXe6PrC&L}kws{T2tf8>rR^l7_r=E~S04n=8tJtzJ5SU*Qf+?r8BCj)A(f@2`m zRC76<>!3&&>{M->Nz!b$d}KDB;C3TZA6m5q-bUmlS)1DavFhiPLq%Y7Wu{8Gtoo^x zQs&1z;$dAklB%Qdk>W4Q6jvh80xiAqF^o@KDE*dPQPT^lPNL^Pc>by$LO{RcPy`ikfd|xvoqiO9E7gx?#`_{W@ zsK$ugrq~s*D|xxjhc+-3W+z%51&uqoz@d&}K!bbO1>M0a{lYv(J?!@c{!1+Y^bRf+ zx2(K<6(aB6*K!ked&ME$|K{BXhKurjmhVAP-eUQ#LTKEoimu>?nqGX|S=QpL-e-As z$k}&-VsV@cL2|sPTdAk1jlxE3E)p@-(!dk`*0$=_gukP$x`RxNJQx5(ylA@ABWJ@4 zMuaj690HGt;HcvpgM8}B}(sf1O~D5{%C`6HG~Z2`W8BTGIqA+rdBcxDnp?UyH@ zbwH=i?UA>Fq4uDHf&>9jj;-x=$e08be>|XptM9=h+wxqET&!Cf3Oo`W$mCXja3|~x z(y+5eqRPZm+Y?6-7wN3-wu_VP7Sh_6(3Bx*T#9&!hhYRA`-DoH3=dOKobE#F8{-g?B}p|NGC7az8Kv#jYF z1de#aJb2RbEQ!3I!35eOt2`h83@S~U=g%BOnm4qanAQd%)?&?|b7f^+ZPneD=PJaB z5TUMx%aeSMSi~f@Ugku$@HY}xiy$BO0I}q;1#W>eHP3MA7K5bV<)x|iH{y|rkI<&* z1B$hU)@;qXPc5Rq(; zoRcM|Pb596#)C}=G>Fj>c}_%Y7%ihXJ=(GswC|�?!_lQ2qD{0=9pRQ#4G3`%g;| zZmb!Kcl=140FEQC5_Rci44ynhn=m{4m!nLdb&h**Ad9K=$D zuoAbt$wQ$z54qb;Y6r0Ud_P1X(f#RYlA+r1sTy2`oVyGD_jGed{5=qRY4Ndim|cXD z=-e>Ulk8DACP$FYfK44g3mN>?_>O+QjOH&ZjCsA2a2(Fh$JjdUY7ctq$ZOxP}U+{wb0OFq&cMYhZ3?# z=HSHC3^_7?j$5~gPa!YAwuMTC*rMf-b^FIekkFMuQS&&-r}DnfWa^ROEmU!BFa52W zDGTSK+lZ0q!y_#QF>?u=Nb+|(tKg)-C_QG?B**g6vTzy5at%d6V|nNMTlLlJK{o=2 z`DUu+Lzr!P`5#hKtd9)0V32oM7cf}d7NZ9?hAz$5yAMd^W_phXjpkI6`~_0$ zm6AAw9#iz5_Rq4KRO)rY9SFe+ecqP!lL*obP;IZQ22C7;KSz!tVxQr~_Kc>Lb*FmX zWBNOfy+qn~)Zd4{j(BBS0T0qU)+`OwMf#qz$P1z=0@0AOf>Z^JBmWY(HjmUyNJh=B z@=Oc9-$$J0u_@@qDqlv^$1ZnU*fULUc0CO|JfYKONv~QwL{YpqOx7q_K3y{S$#bNpBb17E8dJ9sfbUy7-<<)pf&{IdFRK)Y z=B)1{PZ3Q7?bxe}X=;b+(`oxuEnmVXt*Bl(+ox}RO~U8ZBP+e^VeUe_B8=1~JYc2n zaqrz5bqo|^ZT5yK%Fd6Q2&FciPP zM(>Xx_q zl99Jqe@QZ62~Mj;@uP!4f=cEz_+aD6%-&y`9k0VRo3PSV@V=)7+Jg|R4 z3!Z@yyN6uB3dv(&l+20hTXzH2MuL@C-VWs{MZBr`PvI+z+gSvUR4H9s&?l?lORFhB zXkhJbVmhhv)JCfRXp*7~_g;i~$l}HzCz|aX)!Kg!aFjv)O|>^)*^^0sRV(?c_^fU4 zw|@ev$z`P+32=_UN`Xs-oSyPwuYkpsH9}N$z?mW5#7QhzLb9U8D#(Z181o$Y6jw`J zhpQ!ou_x3dr()aOmQyj)J#s2oK%a5F(g?GmJ%Ghy*ft*Uqj?XM7f>LC$u`O7aRJ!Wj6^M(8dcS+b%j=XFRy?QLKPE*Y9=>^PCVr2u2jlYlAy zrMxqN-Fx`UsCwB_&xjrjv28y|0D&)Xr(ns7MI8ogL1%oIsRxkQ9xHHRECR-+c z>~=yKL85f7v#cY(^w#Q|;e?hYkR=p84D*nDf)p2J$F9fh;m}L<9$w*$RsPV*AJn>6 zC$mr-;mEV>27D2HaomW~@vLU}>4<3|=7S(-gRS5)4)QX7?KCNi5Qrn2*F{er$v$(> z{G^T-q|6lkrs%JL=$-HCVAB|mN{_tCdYI{F?ln-@;A3G))}?Qqg{9n`^wyQav}!@H zy*1O#T3u(`aX8mNX%wb`01eni2-X0l?W^&V=Mx9!w?fzJO_bTWiTJR!(>N1`Xtuuf zE$19xat;Z9`qrq^kDG>C36Wc_gZ@=*8*iG`Eg8%1$W35(f#kg`fj$>yv5f>EfY4|~ zvZ3mP<^zKO)qjlYvIHX-Tr`WQg<5j@yPUABQ7#YVrsY?6F8dwfW5A=DmJca>VWF^q z0uf}%%84kgZ>@A|Z^)`ep#-C_7sh4ad!ct~<|_hLf7LQ$D+D6Z-g_v)LYo4uJSWLISz`AT;5wkN=bx86hf2PPlIiwY zUsL)K?vHX?RUWkmM`s%lD=-3$fSvHRoC|WwVLyv3_^)u@gS1(!_~b{TUi(KQsXS@p zM9*BlDqWt(Ikfx)E^iMmUz#r8^JVxa+ytLYi8TDobouTtmw%nhcMmRa4^Q==5$T)6B$jaXkI~h4u6H^LGYde=PuQznJ|w zwbAqCB1ssF_y1+J=7=2kn#bKQxvBk`?P7L6Rq9SvGF~!H?bsL2>Mndvpx=q*FRFeY z*I#(KhWj+-{@L;iT;8^=ydqVEf;trA9}Ud zBi%S?)TDKaXoo*g#&mad!!w2*=zA>r;_6=`nbXs-p4{kwQ{%%C0 zpe53}VMAF3BglTO?%_l)E@nx|FB+d~ir(NOyU)H3R0O9#PJz4C9J`28$uW{O#V&F> z9bwmJ)6B$Z9H^?c&FEXV<#HVf4^KSjJ}ag|#Q^P+bpABSSe2 zl6lbQ89*0ozS=$TxPQ4xyF+~s*S6q$iarP1vphQRM~~#AMYMl_G+)dD@%W;$@Z9!2 zh|3H$p(TBNEnQ_|2^E9fjZ9R5-^>+;N*B22#mzKQ;NTjr5jgL~U@{|zGhi@bm)I)4 zN{gTUBJTsC?CI(ghdpT6&-H{?(j6fvDEdITTAyf+9Q2Y2Ws6Brhs31VRzT%RRP)dC z*R3}cxGA$YJ|;cgggOwxd*~yo!#u(iV~n^DfaW^)9aZ0QCGIZk`=Pb^bYch;^6eW< zqX>}WD(lw9kAIEs{H9aix%q-SZgV=8ym=JYjlit7!&!*>>Vd8op1;Fih^Db;X{-~+ z&_X!NT?BtE^OgCSx)qQ*3;>>@*(-&&0 zcLp-*H6TA+OP7qK)|8TTX?fS^fTMa4{{X88LAWIHI3SIVq!g#zTHr5=v!H1RXWT`H zhZXG3$J+HrAen<7B1u&g{!kw9=p@V;baNe?6<%Cbm%P-9u8=wf-z5L5JLq z6UG_ADoryy!K#c)nF3IQYNgjtlHXB`8I*Akwttt>KGIXbgW2@o*r!@@h#*xtpD^rT zl}j@|2v!Zd)WGcyr6UoeuQ$vd5%~a*OueB}iyTC%kRtYv?ADA%@t*n7>1Ja1(mx&9 z?G5}M;RxEhT65%+VRT#!f+^!yr=)rW8TB(ZvB zO8R?Xqmk^!6;Xb#wZ8T?#Ol%xah>)gr4Y7XOOVJ5R7)@*tYSaJ#&nWzk#xXiGVp@U zf}`F>|IW^#nS=2yvuPk_h?8}F6T?_g; z`HCEz^*o8bhMolSpr7asx4>>40QCfcs_{Vg1*n7q^*VS6U1>9UCxOBa5P>SVCg&la zI11E`q9{*CYy$q`b{oB6-Z0p;>AuZO0~E~zAgc%@Fzjk1kVS(*M$Kkt>|HE$)w|(? zdzXOdJ9VIR|NTE3sE77yd7vW(gWCQTpg!QDUxzbe`r-p5X3|5upFl9K1`q8C0`j#( z8y0h7Xp0a0>tI0R(|y5Q4@@Br*bf~UX(f{<@f0pTKnhp7D+g(#kFHilFsJI0ZjQi& zB&Tr2hiEi5iQs+BJW8X(np{avYq&qQ*FXN06ZfRW{R`J7=MszRm>r~6mNRjDCq*3Z z(6kdF?;tPIjMPlxCFfx{_@EM%=nZEfI;a8K&rUZw-G0ytT;OB^NAyB*##tD2+ozxd zS%j4e|C`=`2)OQtZZ)g>9C}?ZH_#_Xl6ZX&FV>t4_)_w3b}gNtzc7-5HqXRme^_ik zVhg67dE8#@ZTj+kui4}kHxQeHqq7p15y~6j((A*HRyZQsVaJ?!@IrCoXgl(pKk$ej zc&3FT?H}bFC$gO5Rq_VM_-F+|>YPxvjBZMzPq@r|j}yDOMUC2bZVni$PxKw_L|==W zp=#p!6s~LD4^36y>iQ+Nm~l3Ep>QoRkLkK~4A@|P;T0zbnB2M8d`&XBi&9LE?#|=( zRuM~?r`iK=n+1&Np>2Q@tD_=cJG(trVEBmGBgBb#Ex`LTu;`z~ffu!`U;+)$A8jTN zSy_YV56(UYGW!Df$Z`9oq|dH0@4A8NiY4-{(sBTN1Ejs=K_p z^;!xUvo(w{i4JU!^FAfGsFOf57uC&2fubZQU2!*|3m5u@|Bbd2*l7F}E|yeA<71Rk zl8EiVT@>tr`zLmCVcz!P!elfyaACFW!-Y2_3$NtDys^lIVUx$(sL6W%!25#y0s9Sc z3Dc}FKCF>6v{alOML^W1fz+meSb|$rwmr9aF||lzxkHTr-Yzc82JpKBV_^gMNY3E% z%d62|N|bI%YgnQzoHEf?TNE<7-K<)KMRf?JVd*yfatjs|aGi_TQXUCJkemw-3^DBVe{eKP2l>x&gT>EXPi@=K6NainH z9&!Xb0o3JRlD(V6fJC1+A3>iV%p_SlAtg(5lSo*{efB*^eZD1)gvq%%OS7?ktK!>a z`F1!S?Ek=l4&;~*;o9ZUDu^hAY=?F+113CCcZB~B>X4ORmAManPKKW)-;{4Myuky9PVyw z`y}>6fh?WeEAk-$3~rA7cj`%*$No7+OFXwue+u!h3glD8l{jR$nOsj`nsoBJ;bP2o z0+)Kbt$KEp81+&AcJLdzM$&Lw4KD#ff-?zxs%w)g&4ar1Z-G3yk0KO}Zt9pY)&eos z_FVRx;rP0Nu0ME^iq@%e{?4fXS%Mz*KSQQX)W3SMS_ihfNKe8IPq>0_JJJ~3t`C8?wY_eVSDUB8&f7SGpi_1F+th$?Vad|htlm~&c zrWnc}O5+gjs-}qKwokFQrLkEU+v$q; zKPZ1asLl)Ai;(eYaQqT@1osa-Yq$A6pu_xis7^ugn z*Pn7-0Cb|#LbKo+hZQ&nj`I>j5O9SHW=$Fn{qap{w*1%zdnOdZ8m*@dnxr$HsRR_ zMn1`0>}L!{Y~Ljmr7*H@aT()RmeVYRT}$Ni%TO34BQam?`&{M_C^0Q`B|X=FsK8IL3+IXk4{*GlkI|LSH}5!uJc;8dfgN}XdCs#9`FhI z7#-UUdp3rPH)`Q!8#BW5H#+I4LcNBw6ayXVo7997hzvj&4UXRNg}HQ4qIM5S3l%uy z-(rOqOifA7+0YS{_=4C*kY|r7hahz z+`xqgiP_6gcwjxJ?AwBrFze>?gp&!Mgg|tn+Y?1Nj04;fw@rDGr}e+C5TV0Tkm z0>f2VT0mQ%m4y`4eF3I8IvhyEgmhcM`>0xpJ9*wU9@QI4aF5(94VtSc?+v%N#=~y~ zKhnb0UBROoxPN&0xZsB)!V4}ztV-|$Equ$jp>#TNxmWV)2Qh7Y@Pup0Iif#GoE*65 zwi;GYBbDyh0uWx^euErdQ3sZ-`ucS8YZ1{f!eyubH$u>?Sxy8Y1gpCsMDoB95soo@ zsjA3*C$Nplif&Y-aE&F1m9)u|<_Xro{WUyTGwf3Q!Ur{$?n+0pP6zZsjCDB1Iszj| zIkGUqh2qAEt4c;R*~7!rCZPx@b>2ug&Qk8Lh2oaWR+Wt8@3~fy9s%y$(f`6bRnmsn`!9-AR`tfGga+t6L+n_IXK$#;~N*Ku{x!?u3Y{%O(s$ z+aJ`@<*5RT2IroGT&h40bp#_10+{$X3GklWBWeG|kS70z5=jp;ZY)fFA|%?6!SX_H z!o|6jB@lAPe-I4hqzV!G?I*snK6sSFzA0TF_W@CT!auanz|By;CZzm91Mo;#*=4H7 z;ksNR1JrW{Ai9S%d8ul$xjqs9Ptg)pmyR)PpCgc-WCv{OB*hcMI7*ZJ0okuZG5WU{ z&z+byIf+s3dK9^0+LUA#EgO3~XB7;_`_r6NNT`1TMTVlj4j<`@i7&ZF2Kd`4gQ?(R zSfA-JatF>zPIU3MV#eLxubaQ~zqWNt_dR%VOC8}3WP$UxY|jW za#B_Y5cn$WszC@m6XyY9Pm`^c?kRCyd$SEPkFcYX?@Sl9RUnK~g#XaBhW=i}#ng;y zB!Y_l9)G}_C}agc$W+!vmniijg3nR&W0=ZTK%*Eot8p38J(-AI@nH+siVFAuF8~KR z2}c|rSf#zB)M0UA!^i2jY1eYMMxjx8yY*?E6e3}t{b2@}fD@NlCCa*tmjQ$BU8e9I zMB~8LySuCt8jjmqJ&GE`in0IxL53smD1N16$wZtX!x?m71y?}np+=aUbm<19#AQH% zC~`-Oh-o`wPm)0jO#x96FT9sX5N9yPA|#bq%nE!Qb=q#7_aW++FjrvI#=b|D(TVyONb<4CxlN_uZ+((dN>)<@lHGM4#4iem zuO&XuCNURgGxAc(Q-vR=!dp{?8S>W`{uLEofx>BpGKidXJay6^OK-~47?GQZ=~N`C3E*zT zl8c6PF%kPzl{Gq|!)aw=&a77#Q=uAn{B7_<&>QzSpf2=zmU`d+D@@jxuU1(GFH?Gi z+aKo7)jDzl2iDX)vhZB{WJ86y5)=2VZl;qaPO0_k@ zWJ1cFSV>zWSmrP)=?azfO)6Aw*<;BaA7jL;c!m9D)l?C|-Sywhu4rSme^4)L{**{u z7!4(iy9RcOR0S7p8SLbpDpY^`od46EqS!%_%Id-q(I0!C7X5WiOSSNL} zVL#E4(jfPNvh3bWqRKi#nYxcJeZHS$bO1<5o#mpEA=o*A2@1p3$_WI2n%kPj`)@x# zp5cg2|V$@2qr_K1>UE&e&O$iSyqG~wpLk0VQtGjQGYjK zCw3zSgbu*Rq#_t_E5BbwGuR{*=qGwQPr1*yPx>O(>`(LCE@)=ou`dcIxj6%2=!@d!V56nCR*8?!P1B=UhC*Ovv z4-YKfORdl~&S%sfV;BoVd--Vgi}a>Xe=T0V_z2Z}m1`bdY^a(?lQoYG)WohC*W9UU zzQOw#1;Z^0B>Xt+!&R&hJ-!V50*KazP-#2t$tcXj>50(0%4>+e>dc# zbVVqpW_a!UUqE+Q+(rnpCWmNzwFf!tBx5Mb9eXQcpMDAFwlY@mTU%#9oisnvlDP5Y zz60!V*Gk*57H7z699-;{6|G@k{!rxXW!${6xQTJo7wJFaTB`RToY$eIMg;=LYPy}6 z_wtT-#ZUyP+HWRn_kT@o_^=Tpdk6q1d*t)R`iqM7pkd+2J3CM%eU84&*MqP&r8ry_(7w^GP>FCiZHc(hoBvnlSP zy2GK@Re;+{}z25V{ll3rvrp^6u`Y0%y@ZSW|S+Sg+fN z0(o#(n`^jaAz=2dDn(#zpS))Ad$0WN$_v`#@L(5g!pcRQY2M)_@5X+DqI`^HyKcRV zw1UL@n9!PnHqn&Pmv3}GaLGdWdU{vQItAWUqTopdFTcEd$=_6wov{BB?VsQ(yA_o@ zHXP5!4x+3JZ-LqydzkGGu=nkg_7{TX^_kuJ4pO;uB9Tw91!y1^G<1Zeh&~JMsqP8> z#z=ogUZ1`?ll$8;0l#I}pONqH)K?GZUPE!qiX6;1`Yr|ono|4I(w8g7m=Ra0@ej&I z?EmBy(9*zG^8N1WVZbvyC^%DGJOZr7UbvS1|6U5_sOUPfTMvvuU^6%o|Mo#%q`Et< zlY~`gM-t`Ucz3?hqMH;6N6|FX=i^L2>9pqnW_v%DVmr2OdJqD4J1$Eux)Xuuc+D$X zq(6EC&>9=TL$O2tdLtjdSW@~wuD<4nXfZwabgULiWAJUrKv;3C=r2rmY0f0($60h- z7e7&mn@bL~e}Z^w{f}=QiDc{klYE1%;m_Smix6t*tVy)R(a8%{fAqJ^MQ{w+L)OC> z0&1Y{f%cE7cJTpO>4K+c25$AMA!4oWH1F!f0i8}+(J2F+_-45}0~hkf70aWxPsIuI zLrwdPz83LkBOb5g0avHIlq-V(;E2Bz(^E*wSA(>{FTZSQGZ&gKU|EtS`V(-02`7wjSKD9>sp~7 z5PBizfW`jyPZ^8-aw=(@6gY%4i4FnpvxcCt`G=`h-(kJ(JILj=uon2^ukX^=LjG*T zV;+33t?r~7bo56j(e^D?F2|vm31`ivbcZ`Nkl zQWEor55VX->8!axy<4+RCfhxz;lhLVgZ3P1x7jMu%>IY;)t`bZn9U+K2E7+;IHwQp zJ->y~-V(@8(mmze~&E%{VUAt2>2I>a?_K~_%QjV^GR0u6 zy+L`(0K*24!@lfvver=ePv?KR@Z*%H3g1equ9hskb~SyN3peaqh760?3f2r1eiA*f zJ5E!O>$xx+ja(Q;CT(CgS@qoH&<_%0GvGh#i58J~AW4-viosP5Q}>5diH!#t@VAWg zw~weRXvYffALvvzb?SO_YG{0+ioXZbmxaY34k!!6{c&NNzNV2ofP)?dF#GWvvXKum zWMw68xRG@Di%zXzBfHGD3LYi19*DBX13ZowPQAMs`}}TezWer}@|)Zjbe@NHiE!H$ z9b@CeID8Un!BddNyL)HB$}{MP)#y%#!c3fPnm!&v7Qd+^j9vi8Z#tpbdBs{A?iZP@ zvGM}Vr5E?LK+(a?KBc9iw0J;^31So}H6mpn3_5?D9C$AeoJQ>;u8-W=1vpAb$NvWp z8AnC%3j+uc-pHmWhI}PLT+plQlS5ucLoQCmZ>GkJZ9$v`Llp>GI_<=6hWkJ!W)$PC zNRGF%I3G)cHj1Gc5r%bZIcStb-%E932 z`5`#t;jP1zVC21^O+p6A3yca%hO?s2uKE{;V;TXkY107A=pYoXzKK^I2GAA%0S&I^ zW?;HcLtI;#=V;r}R{Xy7tcccp^uW;Z;m{@y#g@17;Mg6OS^>E32zaIwX63E63vJFa z+Hgh|!*f=a;`E-VERD?^K(}7^mn2#V0flh+_2Hy879~!Q)7=kAHXNTjr2SLxqvG+$ zNM`^HI%WqMfe86btYySTm-pKL4#&z3JopZc4$?t*bX9Lk<9uM6u#RzH`UJ4t?W|xw zAcn}k85{8NV@TDcSe`Ody|Si2U-MI-65&oy5gJou)4Lp2N-tseCQ>J`B~!3&C}v-R zXiwyP29gHzi;q#mgkko5+a>+k0oJWNl zs4$Mghi^jAuM$!WnZ1N1l&9nl?fBawRruk5UikM^cs>fJ^v4vxE5LZ+(F1WKeAC4- z+Z!-MqIY)cu*PK9Kwnb>;)4+OlW$}=3NAPHC-ZRYgu`BiJnU4fZ4u6?qMY5y98jLa zUPw7u+^P_Gjl;efSuE&>Peb6Rn4*3p!g+&0s04IX{44}iEfuMq+BHo6Ub8yS500Wt zP;ltFEr1A~Mu!H$fH&hjmBdf^(e2K?0F{fAw-d_ zs?zJQ72sIqZY1or+v%MO5#sh-<0AcIiT)@w22$5C0L6Zc_n8Fu5u0lOBRbJnuY8_* zEzXk9QwLxG3r=8*3*se2c?2kaMFvh8bJ6fTm)tNH`Ic`3{wDC7wbp~flK5DanQ_|} z;R^~&W*DDK?i7B-R`o8Qfz{;54U8s!!$JQXE|pqe%^8lV35y1U`pppU9)EhhVL~7OUvv-P{wO;D;z46_C%6f+$r+VJVn(HTY?yAn zH;Ux0M{;#*JC_kWC~M}ZWx^sn&`o7OmHfM<>V%i#6oJ<=9M)_E(9i^!$H#~eVSL$$ z+`X|4@Fknahv}<>NGQX11-X|8!yvk~CjkcRun>7*Vl4X!N2(YFAsA%dIaki#F{R3)sRvyRJ1Qf zDQh+mH~O3-FptIa1m8RkmFsb=CBb!5jn+}<3NeEyU#d+F8+tS}1vLnW@Vu{TrhZ!b_;fksAC8Jc|+N^L3npkrgn#gS$7*lHfN$#ec zyaER<^%sta$t&ar8h73S>p@K~J0SS2FpnWZpQ2bC+96zyGPSQL3~3JCDh5(jO;B~@ z_*fn>m{I{cYQKQ^gHV$QO++Q!IY&+`#(x?GB2<7+(a>c4rGJu(#&%;S)5DF8qI%C0 zGq+Zr13OY_6Ms3EQ_vFE|~y6%Z8fSNW7x4v+fS?z#lQVGK|sf*YD zl~=~;130@9gd)|?uW~sRs4)WYKuYH;c2A-u_ehd>c%EY~5y8L0+*IxGGFi9&2go|$ z$RNQ+n{G{b2RY{}hW_aDV7Y@KDm=y5!U@ep-*H-3KF>gvUPG%$ZlIaBd|vYvUd{Sb zyUkZ-BMXj?Xx$0DxK%KI?VHgU;V~b~?MqPXEAdseH&~4t%XL_GvJB9RcM;Z5#CA~y zI`!I#P5?#39pG=b3Nbm-%gv3yL7x3XG;4V>EnjXv zV?uwFj2JWF}U8x#}hUD4A)F}YWI?-_EI$|V}s~fO22B0t730bv8h}R z{<>9MGHwD7@)bh2Rq%pR1H{>86gSQGYoBSm#k;XDKphq@3j2fo7@^{b;6us&k$uLJ zm2?a*9EzejepY(9Bx^p4nphAP&nq_}y)&6~$o~rOziUnnl=m z7F8p?ekH)B*(U;SS%AhC5zX>XVc?snyi-0;^+e?&)t;!lC%KSozAK-nr7bFFN{f~@ z>+f*DpzW*i>wMrp-(tkmVB$|vvScPB!SKjg5Miu%l@ushDCQL=wK%KTOFDGP?K47q z8v!<<`*(>F9JaxU+G`jJ9Vy5Bk+G!LQTzkhOOvR8UUw0`4d_2=*~iYOF>!lG|Hw)n zq;-<5G9xd=v7JzpXhw%goDlc{JsSZKEUii4Nj4Xh0!l0c#<&NPyC2aoN?{=`L;3M> zfW(5dt{ho|pp8xwBTx=L}mp zwxHQcBx*n+K@-4jBG@Jx5Gg1mP&3sk$s|sO&gF6uyV9k*rS;d2}fVOt`ee?Nb?m6e4KhJrd=RD^*&pG!wUq^34 zk99{IY`~2PVjiz;kfA!=`h<9Raja7?x|(=2jR zGF{IY4|rnvuGNi|cd~zq!JBF^5>6@%`Sv6@E)3lx23>Uk8?_{a_TjTURHO5YI$TAt%l<}O zQTjVz>7=TV>E4K~c>RG?Up2ii*Q20OUG~lxJkfZkuc5&AVS@4K9DIxh%Pf7D#>O={ zCX{|q#1PaabX|BTfrEvYACpw*dpY~g^MyjXTH007TR=M+XdDUaJ2uH^>`X^e3Zluu zlh>F_1{Tmfj~p%{32;E^7=txw8vBN)SUW<$y%<^5`8w)oOy{k#W?(;# z^eL<^hCP-U&6?jZO^KT&z(VM)PoWzJ&R&@_AUPFpRWWA(IW2oA`bz^*OB{|~##=1q zhc~fTIFv8eBU~d*Osf$E#MtG2z&2nW4Z6AvOIdRdMO31Nz zla-KT_b}03MV4ZKKl9%ZG;*__nqh9{IecY`Bx9Zbn=EMXh~xFP%mU-(#Tz)i*XdIo!V63Q1?>{ z<WPvY^6zcMs(HPeLiNNQPhR=IC$9=JCCCPSw-aYR1Q$c zDy@@FPl73}KB&V^+h~Oo`-UMf2ot@n6ZS1m#}ne!37%!!Uyc*OTriWqA@YduKTYjX4Mg!i} z%^zc9EQ4g{>BB#bG1z>FYC&N<#_q8W`P2{&8=gOfKdr6{YAvjO`$aDGAggmAu=c0e_UrO=OytG@b&W#L=Q}+tnSUL>y;ZkvGFX` zK$dl$Kx@hpFFX66C~GHmMxlTgB7=6X3pnO8Sn+Isp9CFjsM&QliGEPDXH*wNm- z(F2-;^_-ugy?oCRm6Km&3tX~5-V?$p$QRm)YflZ#^wNe=x0L596-RgC(+#v;fFAOI zWp5hh+x`bEMS%7>V=2Im5^2U`mOl_IQQVDEVp#;Ww)|0~`^1)*P<;~)TS~IJ+!XrT zvXrrbp%d~w=he=Gg5S)7y@seaa~$Jkida&hmUf1q5-PUC-v1G)maBx@S`FvgMaX70 zWj9qF!^P}DPK1_}hTypyA7+FPj^98qzi-obn)F`gps1v~S?~Vyq}+>}p?Y`z9SK`l zr@+SnlW9REV#R2Yx!tiP%Abl~`qGaFY(c*VZ2ILkN$<(ml+kZMeAkLhQwR3m70VJu zk-45L7F~?uJUf?bZJFVFaiQ`xa(u6wMo(oq$N0fvI`|0rIFz`a$LUmArJEQy$|-w+ z#t(QCb=^q83x%u@=No?j zP$f$z=i#xR;iP9wR1$HDPyrV%l2Dum4kE*i7w%aCJkq)rWh<;f`!UkFbJ!z^$qLQi z12|)3vnS?p5OXiX$=)_yG!o5!8|U{8)SFZme#iz_bJmCGE?&b_3U%AXE+LQ9a}_Nj>V9F}viGvbfSIX~3xZbm968$*nTolu#R zO;0x-?&!i2L}d$z5&*s5Rf9Z|vE`o2NCe#o=amzZ%;3eFy$F`iAup_j0k zHgttkg%QEdn;m%4H9~fNS=Fs_=Iko3=2ThL zff)fP4ret@7)My85v=fqH=)c-vR47%2iqP{Ny`$~wKGYeLVRH=_5o|+joAa_d{GIV z_*n~LT&sjnLvhr!*E&N7-srjZnd{^;TKh1rwGrD!hcJ3ov+mhx<~94eL)agt!q9VV zQ(gxleFn>*1_r|4uD$mkrrdwO=X9;tH6w50^h)cV>DRUT$@rdY+BI+iK!>K22Z$d7 zq`)aaD!x896BKkRw{KHt`J0MXauYRYS5^%khw3lC%P*53Q@^l>vQ z2VoTz?0g?@|3ni!%IPmhL0`}H+6yTNpnwJll5LoV3QW1UunMVexUIVm-UuAq5gCHB z=8o10=R0xU-~YF&=pec=uAebjoE~cRkGUN1Jw5qaoJEIc<2+ozfz6I099F0G})1mR5b3uL|Ez z4{iHwh24V0!ng#Sh z>NXd=}u~J-0G%C;Y_+`7uV31dlWL0|W(*kpc$} zgl!uXti+u!Uk*`KgZulC7!AJQx$IW$g&Y*dSC+memr$)6RKo^ySlQ@dr-M@6;c{#Z7zROAg=U=#R*E1&`pKfDZkURNfZwNLpqS zF4Tep^b(`^J@c)>r!DFJ*3F+-(*4J07)qh=aQ%S7WAGuWf7fU)T;LX}Sf?ng39kY> z3i9%O(5CY-3Np`R@5cu?=rFEnGXoRZis(7gis(7giqc!2VJolx9`mN>J#%v*o0mye zGRq|UEvBgn=RROB^o*VPg{x#Pk7fQhW`4lVyz0v{|2s4Pm7O{FDw*Gn)%*!FcVQ1g zVBYrSnY)Nm&OXy$WF(7=+Mz)5_iD?mDX@o#R(M9W2$Z4*uWJqz^50N+Y z3U-dJn9p!b89frq-9pT#*3=Wi)B{&t)B+%nMCq|60TW}6I#gZ<9xhX^@N+_lsrgVK z6n}o0uGe96naU47meQfKV84ptgVB??`L_Gp*nCOz@p`l=GX^=5So;^pi+xr3}h zP-?PmYjH*I+AIJi8uy@sp@Xl1ZOTGl3o%iv<7AFQTX_LgB@OL7Aq{1Hc|$+3 z8ydnopFJAi!gl!efxQklF}q+9#AeAmGtowOZ6j$aTNg`5U_nIK&81x`%|{@tPU&jeS)z+RgF`@rNztR@pW$uH)b)tEHkUym#)`r+T9KPI-I z{e0oWrQ#dbsT}-%z#VczkazMBVpM&sBRu{59rSU9t@&$_L9kKzoV6p;jFixp{n)MP zt*o#;9e|ZEHYO{HG+B+5$x0$kmciOISxKbHN+L~G7@3@|%1IVq)5!Qum#@v}v!9wQ zblrRkixf4l98)2uxp@ymvR&g60W<=@#pyF@|GqZzo=sn^?myA2xha>}iQDG+SFq}p zSl!Q)Vw;H4CO=DHGX~~^=?LM}KhAbbAO)*Y3E)_Jkpwbe*ONdx3}X@iVP;BT3=AC- z7!3;*0!{t``~o`Op@kt&V$HxTjqmM=9{7P(D_M3x_%KSq8os}xf0fT(*|#Pfa=Ef^ zpJNv$zHel%xW1{Lpl^ixYEZt3P0BBUGRj}FUl+yy)!_S^tHSr)e(-TB`YP}Z{a=Ic zM-WF>;_o+m`{K{}72#Wq8TNk%e<#0vHTb^X4?f|s81Mc``nJmK_Jv&d73e$ps_;F( zr!W41zOO{zv0nwgOXxk9$mW_1Z)@rCPEtrI$zU<`WhxJ&T`T}QP7el#SWB`xH^rx`}T;9%` zeI;W0)1yf{b%{U)L>8A}GBb4@>OF`uqwb3KKx!T?{*OFgR|=6^Cf~G-koFL@j*%#! zWD1d@ED+zY?c++G_#z9Gc4X$g!ig01uq!;shpqq;bmbk&Lac#9KUI+awNaRE6sH+g zSf#wJk1(n>>USB%4LUqBG#bSj`rz?}%^sJpae=gGE`1WG`dGKQ^g}4@tk+!n9j2*C z`e|yD|IkWdUW110huBB($<>wcfOIkgy+b)hxEz2h?xrK9mHrv!DQ8$dh$-_gDNi}T z^0j|qd5%+-pYWHJAG?i(Io}KLwxQ8_qW?2Qb<_`Qzx>hXP@?edN#(U*L-<|1NpA@! z>di1hK;MT~j0@tgNbF0~VTvhU4}b3O7deu(_p{(-U|nYMI>#C9{Yr-mK5OTH_WV@b zm(_!pOB|_s)vNP+moJ0Yp5A1~c{A$!PL7bBwz*Us;iV!g?LJF}f4Q~^?@`v_FU5BFw=$vKTmSNnfsS#FKL1U&?QZYneZ``)m1m=O6f~{O|DjR1K2Q`)g3}vc zce3U`DV#pNuX+%b&odt8F(G`cPMI^BSz&+jIH^+M67OKTei5rb#5$Al&L016HU8Bx zA=o2aN@U8}-rk=~oP`@%PS-#ebNW8Wz4BG`ET!lt4};6J_wlKMGuWL(_H-*pNwj)` zD1#jzSg3ScnAfHp5~K&x25a>tgB{Gk?mv?YN(7L=)Wm4&w^S<7S28#$nhHmJ%$tNB zDmVC^e+*~DHSp`Wa4;^sAs467ipcnY}X71OQ_|N5f-iZz?Ydmchq0bnwcfGcOt~|7 z3WLWzS5Nr>H_44ETn9JUX39{c&ee-PNYCsEeu7Zt2f3pP*9SWhEcl=dmnQhSb3Om+ zYs|NJ5|ob0U-U2O8w`A;>$^~a|(4umO(#XA=6kt^;RyRDzR!8L{T zm4oqx%-|$X7q8(&ykvZb<1C=NmC&W#g&Wpfo{xpkIAlFLe2o}S;G($mk^d|0y*1fx zFWGJnlhsw)ryjRElRA$lC*b9An zy5oXb@JJ%IHs)_*Ry{u#2Ve@Gk54I!mov7!fY)F)iF&7x(2I}bdrOdL(Y>a7aj-Kn zPHjjV3i=`2J&wq6rT%R-&Tobf&2-9{96P0 zNx1gXEO<_(&I;sD1kAV_69TbS#ndNB;}e*NUj+Y0Zr2#XQG6f9hiO# zsALu_R^59Xcu2x`Fr?3;D(SW_rq2=5hx}%D@uceF$BI5DgecS5TXNu0_AFaq&kf9U zm?d{g7z~wYmJF9LI4Q}2OK`|^4=U)>9iN&7KUAQAP`5xT7CfV(pb&rsaUWK3(B?MM z1}XRa0h;=h{ezM1W&7<031KmfrCr+6OKAs5I!d1;}Sk0;g2N@uLgJ>Qd6*wM~u$SSNet~W=TKhf&OgW6e|4)F{peZaD>iD4k ziIIg9DM#i?Q*D@bNzWtfjQZ=O_#8C%{;GdetX<6zlGC8l-5+|u=zX;LP5Vc3S%(k zAI!?(PAqAVZNT;SGFu1&216tX>jrJ}%ZW^c6k7Ij^8d+&!Z571sTTl@stPTu8~01R z3pjk1f*zYMtSht$4<-WmYdwDmVYobt;QR_o!}r-JP7rU8xjqX`?#{#z!8{T&)hem} zM!ocSCVKJSxa;xpq?uJc9zL#Kq^b3(GnZMD_Ihi#3b5=t+G485?VS&2YNI$?#gcFzNY+C@25%7(_04L)v0JNOEYRcP5(@awy2S#)~kBNo8-d+51DDR*I;15ap z7Y-SDxC)s!?Lw8VV<~jRIRevbf8-whW)!)YE`Z;g;(K}&-*H>`z1DP(AaZ%%t|0e6 z;f5>;2D`lDy@fk9IdB&9ycU}eEqpiSbvXe=AAkI$SdQyAqy+3E^#gGTp%4Dge1rI( z2K>+HgMTuF1(jRBpz!~DSpJi$+z)zwjUz=^Fas-C;d_2+QzI%rqW7BsYxw@85u0r* zPGRw(*Td1V6B>?uOapA>;;h?gB;ZCRFus z5*JrL4l8Z0(;lUy1;mpY?hSSigri4X8VB|okW|>VY`Lnx6#V9VlxTb@4UfQwjXCv4s?6-lm0Z--a{kl(Ta{!N}5xf*I;f*@&9t+GZC>Mnk zjGx)OtZtxGQ3}V$H`nI15P=v7qkv!aCg6ND$>ZuRY}EYU5=%i&{6fsqUu^wfjZgU= zkNnX>{#a)7M?7cX7FER=U&tRH$v%ZvcW*!bXakm_{BbbK9}`C_{ur!SV%hNU7=#p8 zMfsv**>J5MIOxc1viL%ZfiIqbKT}w^^!=lt7Up=tP8Mh2iyv}^Ya)kDNw&oqNpIn@ zShFD8;tU6)G43y&DW4(qw@BGT&fvJFCnXxg4b{7 zaG_s|=KqP%Z}ipa=Zny#7!2ZAgVM|m>pRWv^3fcHOp}w|2YE__f-H>D8)u~k{lBQZ zGTU>9Lne(vml8R@vMcB_-=(2$GfU=bY$mo43AX9JLxDYv2JWp+Ur#daA88gU zt^H76B+V#H6F@zwJo;)>@$+B-lv;lr3UT`GK*=zdZa$?F+SK;PzBirmuz0YMeHF~_m4iDRT@!p4l09dG-T2;}7)m5?p`H`jff&#n63q5TtEH~s6&8tlMbRIp+5 zkbvj3v>DSsuBJ&Q3NTK$cVJ&w=OE>^(Fp3dOs z*RZF#P-OP>$3Bh+xo~>S#b@9C!6JqJ{h9Ow4N-%`9VNkD&{5$>l4|ym`92~#Z+fo77Ncf4$};0Sv3pKl3>_K?9x+Q z!ar=+bJ}MeI*;}D+uYv}bsp-%Ip4;!xE=+k&3K4$Y=f+pjN)_VTf;Ii(f)YY|I^ps zqq*7vw)MAb`5y&t#yxj8O}T$!?%l$w$2suMnfkDiQbdhEbEOlSckM+lN_m}c)r8>| z(g{2LTV8LXeg>bS<=%Y(=ZQS~?ZTMtP^4&i#s;otT{=a|pJZgs~;eJ`@_3ykU6k~_f~P`G{ITvHAEER!mV z2ln8MnjZKzjO}J138&5Uzzhk0Tf*O!@UW9ie@wzYC`fwXaS4AQ;qR$1OgB`XKQjCx!bZ)g zTky+ILaxI+2dpIYLjCg$q>&gSQaw89uuR=YgHaay!+2G!U ztn9L5ppmiiZ7asxij9@sRxI!}#@@4HtN)6zb5?BLEsSlnV%;MdyJW>&f5%vZ6-&K? zu{OJ07Go_|Y~!7b9kgQk*@)HbWlX#T)Bx`I@dftIQhmZSGFK~~kcOWrsdKg2&1bdh zAR{UGc_=r>XDqe+M;%pDxWnDq2nxn zY_7JTk?*pi@8Ewv`mUlB6)!kASMxGZ{>bQPu90!M7VPA^jOe@c_;+wOU9q|jCnoSb zGFLl+7ArdEYL`RW$n`HHSfD_OOay%?)T6ZoI`9q zPnIJq8oz8cei{8av5>`3;bl~O!2;ki0Js38EIyuu09s%CF#-f(K0sL9fym;MOxcf= z7Ca9C=#S6=G&Bo{s%SzS9jQP=3y%SS56A%c2l6U*BMq4Fl0Oz)^nX|h7AT)O2R{#& zF&nvukxBS@G#4ockb+K@KMHD=m!~5ojFjKw{~O_9NScab+V5>c82+~}1J3V#i0~nV$vNL^N8}SkfaUM~0dU+nSKEie`&i39*0*me%=%fP z3031oHD6ToMfKFO@QFV27v`VZ$U2M}dyu%FYQ1b`4YE9^W{Ld<9}ZW!&T19TJGEr@ z4O*tSSXB;V&mTg%`%a=|qu!Ib3$fugk%8PcAlF+8N>w0GA>~ve*|)6&|3RdKg)0g- zB7#6TjDIlSq2HpaG>ygABJ?*1Jh2-2BFKg;-q)Xnh{uc3(-`4L3wU`JFaKz!O+k9j z2*klvZ6I44`5vs&MwWYm4aq1BAcjE26U{0mOh6BTVHuKEA2pqCsEf?WJtYQhBjovpa=samFH14 zn7X}D8yWZo+J=a0(?-I#{R})a3(@=2986v|Pn3o5YGmLJC|JyP2PLpL(-HE^((nS*e^6K{`>@5u-f((+#h*x}S&ei61qr^t51P0*c z8dc&luvT#xakRU*V;~|6QEKrCgdPtOT*NB;JP?hRDa0bbmB3le>%0NQHmYhCpG1Mn z0V{HZrNI(H(g>)Dk}$1{8%Y#QL<7gzl$?~e+I<}8_gV>uLGyNswVK`1tq7$BM(EH%pw@G>kp<9x)c9B4 zR>Z2iO<&aoO9juqXywk~W{$2`y=g; zKKS`MIeXy5h&|Ho50ZglR(C4 zgn=OTt9;4LmyA-PdD6|uHoJ*QQ(3ZL0OOFgW!-!`^Mk-?qC5AvnDU#YibFaBpFg6?W2WiiW7D8TlEdkPo zK6&N43e<(Eq5^S6rGUaTD8@V$Y=g6aSA13?LFSVq2yhnjY{Xk2uY$rw~&x4ST;fQh)1SzxjG`>H882E1oUUh1l^OAuKYZl;apk{&)1~?*> zcvgr9Ow?hn7MQ(ue2wbEA>ML|PeV3j8nHhKv=QS)!Uk8yF&t zS+uenZ+4@&6jfN!My~D!QnbucOkky$q43NsT?-UY-SrZg9D^Yy2`#Mjjfir_KK%r< z*?I&;Y9t){C!nVR{XF976%F5#AoFWVwK#E58~KWSUXuBmg%=F^%U1X@N>TZ^41Qny zG3Jjl(DsDQA%N<#g*2NamqD@$Nmtb`mU)R>YbvZB-o!zR-cxl6d{bbF02}18#V4-C z&mUd*`IJ9LlJL`tP#7JEkpClAEvHG~%WD+CGO=A2C!NU836&F@jF1Sj$^2dcbd<4) z<9J;m{`V1Kj~++YyjDWRYx4v+L1*M+8?RPs#ZlB@hf!)41VQx=Fo>T%p2I=^^g$dnf0;4L2*hwp6Jz&SF{fd_BeA?3<@3ZrGoXf8pp>sJ*u~5r zIgK@(XOO@N3vq@Zv-oC}5^NHmzsDAV)hT>^0I$`2Wyh7ki^ZBzKVpV>rU264y;sOY zrd@o5BogYJCyBV|SiGMk0(Z-x4?!ynZBWFH<6a7oP!}+&7#cB=6=e|m72=5&uSnF8 zHMS+f39W3EnjR>)Wk+kqaaEOJO~p7)G%1atuJZ`|4YFdqkb-S{@qYwijK2zM<+2+i!6`8PxR{5t)CB z1=Wjan+qx=QS!=o6pf^Uh7RcEKo3JSHH1FWMtU}CGd!5JIFtlFYoxD66bKG+9UOs7 zv;W&6qq(k{hdNFKejz=rSowx}ehTT1#fUAJ)zs6?<&>2X{iIFAD<01wf<)?Lz}m~1 z3a&`i;wiQ~fdN5{T^AU_ipa_hqnx!#EnJ;lh8DK?=s-*kAgz!!g4a^rJ_x+0+gye? z5JMfvblDPFGS^)eSLrCu)!F0VuEUW1?Lclt&HK`~2oTH}GES1p@+h{j0yGgW%p>R| z+EiC2sHWJm3|mAYydtmcR`^1laVxEJE<|Z5TD%vbFsLg831QBnbOvEC5KzOnD2Oav zAS`qaK|+AmDua6na(ravV5GttSwh>8Wg>{y$MF}fFl%aUBjr{6x~%X1Ky4%^Zhe*o z>4Tlur&TIB_+&T5B3ka)q5-37#q#WDzX}VteHq#+mxxgw< zS%Du$z?@}Zx(dvj^HIaBHiW@=v$5|E43ww95d~YwNJZLFCgkI1^f<(zE0;lVmE!|3 zse3fDfR^Q>1Na$(2&Vt&LJ4JOarF!_G8?75#T%i9gL%{tVN3}%1eD<9J8Nd6p)R^m z0&q4{%Rp1BB{iKcgeKT!7a5x>E6!cvqVL0xr6Ki*jJ8=n53! zHl)#RR1vGxnh(UX#X%j$KehAd+DOcO82042*dk4dQ4pV?sm0VGj7$*zAT(^OjaHHU zAt-*O;kqRZTv;21EuoHirq8;9^Cv}TC7u=56ct{h`eIL6VQVE#v!AR(!fO;l#A+$2 zmX05OO>xm7$O*5#2Cz(6VQVda=pdlnr1Yahhpjmb;;HXk19q!Km)bE&DjV1r%sFaZ zgxmrPSCXchv~8?8f2}DC^6(UKF>0kBN++v zKs7PDMwdnyth2!A)%P>IX!)?ZM1z!WRw`xLd?>ZmMU-V+3rWL8Oh=3_?ui8lWqnOEpcdRj{zhVGGMhKAQRa^8>E3+(kx%w8*&+9_t1jtO7i zcT*M6I~6NIqK}~CSJ?)1)|9752%;u-4!~qSMIX2WNUvR=JiudzR!bU{3>o_ z&0||Ah4NsRsi}~lpMn-KuZnF{u@_Zrt&06Z#a1(h^Cj4}ao&L+H&__^NtgzJYp=Cy zM4P6iPOmlm>?(4mB?0*m$ZZfkN+=tCcAk~+mAx*LTi(>PBC}x|%;gm+528@;mzo4Q3^VachyLha0fDBu59Z;+9t&XZP0KkidQ2MC8@KvVFvbE z%Vf^R?1r)vQmK_mk;;$QWsy+Do?yQAdJcOAh!L&Rz2;O`E7Bl120f%#VR!) zv9Z(0SjjZYY81A#>+tJ@8kJbu&>=v22&%2@q=aA3mzRg2v&d#j*fJCy!o(Ez&r>hk zko$EtB~lltgr?XI*;rwca{xEEUMzOqcz2OFc~;5^K7?FcU54`3q6p^a!`NAR0vk_H zUsTXqa~MP^{uRlGbnxPSgBf$GOEg+l4)zm&f$`yk-n(90W5bEyG=RmB6Jr=>ddj zbTB6kMTl;q%t_l3B88s9ecF?f5t$>AAu3WPk?T~XL?Uh#nJJNLRisEFgH>cYBBpa2 zztd5-Dm)b&$Tv@YI)LAtVE@Nla+lL|PvHqGZF6xdL_)bgEPm-dUN8)5fra&=VUTaLfmjRe z^3KA0iM)eMDLW8Fyu7zCA1!O4Ufx-_Um#_n-GyY0c8*MbwJQ zONJ5_5U9L}iVH^;!b_wkNU$>OJ(L&SfHxL36nucqB8R|}S=_9MB3x74jB8fu+? z7)0Sp33WY*y1Z3*xd2MLw<>^C#uiEp0gA*5Ci9enZTg=ra}Pjdg^)E1xwJy1vO}_F zoPaA^R6vP%qT7(i;kLqIOIQ`VGGw`Yj&c+FYND@e1|Z&!qzV4 zAu=16q+v^yI5S<)=_qa)@ z-{b%YdBP!L?YUJPL+0b0gv8p^ZxRB++5u*T7-`Wq7*-v{uoJ*23Nq?nT+48YE$foV zDhfIUS)7ebP9PjjLVF*&fD!hC%&BH#z*dHi(BwJ`!@7FTutcbvSXEf8js&PRlAuOK zG=Z6i;@x~mPBjdw3nZ^>rxe`4Vk$U17EDHP-epo@BLWy2G%3w$GS;ZUTRll?fNH!( zjr6z#B^u%qlpIkB^A8)ArczxZRkWiDC9&fYl%$DE;0%d=pa@)^_%6CN|3RGBtZn4% zD_XYoeN}CQUMcPKP|5ff0`_+2GEB;Nx|d-v1EDbS;$t^m&W%{sb?y()GJgYdfX$Q= z$gV;O{>87=ga#aJ(PltP&Xm;4aD>InN{(4l55lFcFr~BajD7B_aVM)@zB6HVo}HOc)Eu>=;m1sT)+O zEcO7RUiMSlK1D!oZbu@m#a^z(lw!_VK^3*yyBB#N@+eZg)`D9O+Q=?AN4xBtvjW+3 zz?k(~vVmG2?MiBz0^5pFNZE`IAshK#HXsnG@T^4yfv91~s-(T<4d5BP&!bfbKY$)W zRRbK~*DQpl#4LoT9FhpHQPZ28)`*&K&<`UBzht3SI4^InjQ}^95m0lg1(Gun0(*r-`1B zWufPy=5Pyk5+K85Cjm4Rl*oFSGq}>DQDemVZ|BOQ=6yj9P4rZg<3!k1^yt;QRc2)T z(;|$-i9omjRO>j8zHgLVOb+Wg4+qjXUgfqTk(Gy~Zpzd@OLApy2VbHvN7mB^teP0H zHcHjotQYYXW_oFd5&H~R2vUdp1MqGt!xc60d>Ho#B(L*^+D4A}xb4Ka^YJ_%>5l2= zay>!3{e2QtV;bOJ0Z|JEP(cGZ$|p^ADieIsJxn6CLBaBZAx<&Ezlw0t&3pqKlozc) zsQghzLH#eY!xtsPj=+}Yq%!wW7S3nk1>+cpIw-dIIWA;-mC2F~yjQ*;z-)_{3ku^G z+v5Sevd6Cl0y%RidprUaT*E0dJ9QAH+EG`>rAKPv&m)5^TBfzEy~12i;UP;SRf!r^ zF_lt{LD`TJm6D4nu{5(>xqG@f?<19iqHr8KrUh*{aBIEdAp zR3t)MD$fCAnVj6pnT>(6OQ;gB=A(vLlprYkB+80tSs-nz$xj5&LK)~NCRT83T2xkf zm&lyiug_FZRtx1sR6$hDZDQ|hN~>Cc8CFiyqFJwHqn7Pj^omC@Xd2;CSd0@~U<>+* zT~5d9lo$eD>tKl5cHtYUpQX%?0QYXi8WFKo`u6`g4Z>ptiwPdvrXp*}=nd-sisMOP z>rhJAI>vYC0vfOn6IoUcrbUev=kdN6C=QG51(pkLZcuj(zeWy30=9`o+;UCynfhP! z8Gvd-&PssXjuGK44p=hxL*%gj7k$WFz>es`oT|fMBc4`@ZVFlC5M|42MTjw54AYcR zip^X(fKWc9i!xZ8qWSknQv^)pWM9YJ8 zZ(pT2C8|nd2I{Lyw#7jws-!h%iE0=zMo3#^q{YXt#gC|~{d8NPC_=NGnvwug8M4!4 zHY)_hYF;9Q>hB?8su#Fo!F&~z!BxE=6)}E7P(3HWbQ-iVqF~TgF*5}RIF~UY*?#?s znPV_v91`YP+bv$AdLEU8Eod9quD+ky+t~J`A+g}pSny^9ErT`_Y0zfFa2z8s28YLj z_axRfQs}EG;Tv)Lv2pjch@A!|Lg!#8Y3dyO?TV~iiE$Ai2L@ls_)k*N`vh=wx)J}t zVyGGA&>T&dr=JMv`{dv}L{&u>N^wPxL4BH^S9rOM;RhEX26zI@{->tUzB)@PmnB&n zvWGuWYqo>f6Dv%HU;?9k;ec$X{HvKHHSp~8pRwIeCdv!J&ILnvWNncY<(6QatzV37 zCz6o%-!1?IphB2{&`XrM)hD;o#NkuEe=D&LAB*t|M}vEKzb3cd?Q_R1X36dzwRaso zb&QYoaqzeY$5!;Jz3Tl=nyi*I_n=_Gt{yW@oh&Zdfuie>mcoevL!C#|d8oJ)lu(Hn zVQdQAw`4m@r`>~`=11LH@fvB@EbosTylN7*5F#|ub5v~RBh0pb`bEf4!NyRx} zlmRLmvmx9`gN2~ADEiFMP5wc^TeTV-1-1)gm>g_CZ6NwWZnTSGnrm##iZmlonQmWw zE7}0*WQpJQMQ2V?uber>Q`AkU`>aig1tB)xgdiIt;BWiC{TOhU!Owa8k88D+#l44|CBxP?Qvz1*oeh?P8($4Ipb@=pHK> zz^Q$qPYkkY_2`@N;`b0xZ^t6$Byx2%kEY`l%)csT-{;duU-d-_?8U2ClCvHVr#{Ot zQsBKTO?T|U=cK_SiI^3W!GgeQ9|?g2%40v2FaAla#9x8uMh33u1D}c@c&iF-MDTVM zTx*YK2sNIpr1kuC3nFPyvqd#Ih9|i6bO@{lI)pI*4z|Ok0}H^>K?KhXz(Tg>dXt}p zaYH1GUbfRjvv|J)C1gbg61E}0UFk|DfOA9O;M0_($Qc4QxfHSg+aWQ<9#gsz0l*PA zyD4J~CDk660xH6qXvQbxa*~#1<5o)jCPXwOUtgfJ-jv~v?GI|Q61DFDSN47Q5BfrX z2jW42E_!``8xR3?r4Snk^`^L7khW^@%KS!6o<(BPZo9$=|J|~m*SRUU}_It}3 z6+CGF>aWG04tF;uTrvh-rFitcgEx-#ZJgE1d-xx7<33td$1cFz+S*xrL;!|An?KzJ zbzHRHc)|DAxUuY#0akPcL#g_%;3uh>U3ycncZ8#RY&SPJ>*1*CBRH?jJgk2n{CtGt z@YutSCdr;mr#Cx-VLaP0urk~95165CY@0)s#HZ`O!@1E|F}($ip#H7Fo)M0&v0a&P zExct^UVH+xuwuB#>62}1X0zNu=4c+V$h#{tgHX70l$=y2%bI8%Gks^wH_?HLAfJ6P~!@}S+gY->>WpcdN= z;g`_|{Qz%WN#wi;8b)vQE%4&n8tfe5XocIBEBk48ssUc2f~SDq521K%g@=ICBOK>j zdma0)=qgH}f8tbXpX3ErK(f|uM@zphtA64WeDqpBo4H3n5Ii-)aiI0$pVM{gCOFIf z2xjy*RFA_T!u5Ngn@iu5d6w1guRWR2n*hHm;)J30V@QI8%rmt|`NZ{jL*Ydu-?Jmm zi~)X7?j9B;W$!bxUh@8fz8{yfX1(JXYd+Tt?>jl~WG{K?lIJ$_xgI;#jr(1myNsCg zo$N_3owKjR8I8{1&}vk-kQgI8EVLW#s%u&!&+#=$z^~g)B*ha8?N)Uu~Y9 zovcs)NG>4W^RW&OlZ748NC$wasvscM^LtsK<7%L^*z+B>D+^oDHe3bi`yl`P#T_1; z&yE;FAj9E3Ppki<{^@OSat1e1?ib;VVs>%J^C7^2y5V`3I&okBt!Ws) zg23a(bQiqLiL=T*r{HGIcQJ~>YTV0_Q%iT7uF zBA(x4Y&nYC&|Kw9V?V=}W%~K>HV{|&i?HQcGM$#w9}?Zf!J*Z0;Kw_bx9`EP707Al z*XmvHZdw~e5}c`Y>4S5@1aQ^|usp}Yj|1E&>=Bl(o-X$VjDjO0!X6p>AurN{VZmx& z-*a1OHF%qZOL=6X{}^71#dR{DPR5NDzrxr0 zy+b=oVW44S+6r9%(JLLw1$^iVI>J81^(EB#P2|BYO7P=EdL)ADCMVhm{j?%6p)-ZA zO5LV&4eOWYt=G@twO*3pl52)lTl9q=_dSR)R@#a@ZZ1I0ll#{v^l;Z4)u0oElWUH3x%LDe>m`xWGP+zX77`Lk zoIRa?Ys2=SIT=?0f8$7FN)KG_F|}GkxZL9|hScRA1=nDA&9e~K;L<&>TI(AT1oUqQ-MQ7%x6??Dn{2iE9!|csA7d6yaP+7r z=3h?AXY^!o*|>9xr`gv3$!UZk*9E_fxE&pi-SYN=BAsudbBGx(eS7UuR%Yr*>8(A& zs!Vuc9fLV2amn+>BBy@7_M|k2*`H5L`*=8ZS7mzVHLmqf zYmcxDI$@P|?2fO+2HkpIlrDf7^?ja3)CCAlXF!3>OUUUR(X}ieONF*Q7p*yy&b~|T z?B(p55Ur;k#2*I!b^*z`*z;`4EuBVOVgD2wtMd0CmG=`>aIVV0w2l%Tx zJU7Eft3ibcKCFYM2KbKVkT;eOwaOV&FG14q+Phv%BS8y`!}UG2$AlI;)bp=N3JZB# ztmgrJI41we*;OIWN|=IjiM7JLNx0RoaIZhF!^3NSlJXjWA-pByF8>T85WEOR%%0%Z z>fXl~0*{<;NkSSqGl;c19qn=6b}l7c_$UoG<30BzhVM&~TT#Uwqsp_m)D%WB5(ZQW z9!*S|o(xBzAWB>CSR!Z@BTFZ}0$BP~UY9?wjW-7!H(bKa#{-c-bFecxP#6k4(Gkcy z2$K+WBH)hl#-(jOtG%%mq5y85H&-3h-slOQzDDE{9Q)$kW;knoV^^^A8eRW!d6(!X#^rxu3`cd>()-2Ue-rcJuBzW(X7!A3n8^XiHU)Y4!Zk71i zS?zCwXSJDiODk6=;#ls`yzY6A$Up4!_Om2vyk_U z_MHaiKlf4Ix$rJ?>EGkBULXc@L5oL1mN5g;F^`RcN`zkEiZj=I`TFus$6?kORigb2D4+hT;XH9jgMxFj$eWg zMb9%o5qt#0qir0lS2(x{U|YmQ$|FnPLdG~8dV8V#N*mPm zJYIqB=K|egB$37LR9Tt3Pyn7}}uiRGLqeNqX_m8A08SdwO00g0i=2-y#@CgFg zL2l~lF5-*A6d0y-^JfxvpKsO8R0Pkr=>B{r`B^7!g2%;}5+#s)IZk41%5Tg55$)AH?0vYh% zhfu&jNq+O>_kQ`Ej9=&*K%gPHiNUv#hHHiKi&ekAYB{4GclH^5zc#H$-?SF-%&oZd zz3@}VR((SjqUTj6>GOC~3T)u7Htka@DjBqCtyXm~#_h)}sc$MmF4OIB_?cZ*x_>&txN8)@>?_x^sy|F&e>URj+a$QC zyx%aH-4OH|PDkM5z!oekjVYI)vFxD6vW6%Lye8-|1y!pAZ5tE{NsjO+-zI6U@>WAy zhiN--A`s;I)Rf|{E9|nkVX}Qg_|kM@f#%9?(YI>T&gdJ~dy6)0i?K@Z zkuq3c)r>SpGkN47Ld%47pTT=}gRh}M_cux!n~J41Ahy;2JbrOu^Ey1h4>cz(erQ3w z$-kE`@z>+H(JVgbC*G}5QZ4`1oYxoV-|C+T#5gl{&m8!L@X?1O&RmWR-D&@p5k2I*xn5!s4Lci+9 zCl69V5~NtO!VkvN$|m4PM2A_}6_wY<(4?0oGx8pQWW)c=9lqeDT)5RobX5o2<_q%` zgdo?bGX(Xnx(1I6AsKvncYMsZiE!q|UV}C!QLcTX`I!OB){tre`Bk`05;>s@p6x!C zAdgw(Xu!4K(re$v31_uZA)K~6n~Q-yoaQ3$tVEfs^H%_G6n_!2Wg;LfUc!)>CuwBj zSlS#(Bmc+JY9x(p9!sl3jDm|isstAWQ(s1`#5*ujN0a|O6@rK&4a08rJ(uD~!{l2- zpur^%IEIHP%(nPOAAw*`s=k42U{2}K&D975{Qtz?RX@RRlb@`o+OU{CAv{Fsw{iTA zJ5S^JJ*~7qzyF8uJL|eCzuN<1IWnlBYHT2CRYSHtM5zA-{2vnj9~Z~}+U9NA8zx5< zRzTdGhzt#T2hv1V4h#t7$ACae=%;Y~ ziUEOyFB}jimms2bsquikUuitlY$6>JVmx27iR6h(`0^1$+NZ}#`!=y>aS3rl$ncZ= z7)Zi&iuK}NbA*w*0`hAJXC(Q5h7?`G7Si%kFuXcAyx5ZO;w`b^wVlglKe^5>$FRkp zv2p|%<+SB@A-`5H!dR;}ITCn%7Ub9m!H#4{^L1bXdBm_xR5jI&Y0U&Oq)5k-lNLM-`fb&(B*e+*vXig*0l{Ae)= zxtcZMTd-FFk+xX?Rze*SqD;wgMA!$5!KFoACKE$70YeNo#x{Sby|GGo^wc%HfrzOP zykRc_O)`N2E6^sadCqjIYlvhy1x<)8Jo|6<7WX``kKX-UPd zUNtSt?|4y3aK`~uzqj!koG>1D8ZG|@Fy|As#%YLFm5cBC@IKo=62F@N=bsU$>8wzc zRZBG%^$}TfBx{;v{Z~kt+D5ANme#MQRL?!sJ9A(NIte`Iq1qY!J1NiGIyQeG9h3 zR_#RywPUl=d>O%PKdaKFnS@L?yYP#h+!2P!O2vdHAaZ|$N|QSyRR1vNDQ1M4B)MRn zH~j1$kO;n$H!vX=r%jG2zuKNS{ZSwyNzeIw)zF?gC_(43O z0%iskDY9F&Y1?(P4ypca+RuZ&O>8GY`}uEOzYDy+mYGdr70Uz*#@*Vq-4h_C`3jQG zU8|d~GJ`W&_pe6)qJQc6AE|{<179qCV=Ig;{*4GX`QOGb!Gbl#--vJ+I@?e`^FciD z7dcz-#C!=RwzUH;O?!$G6KXaQBG?DULr^#Q+Ze&0;U@%`PVftTmyaf)k9x^$a7!1A=A%V4XHb(f%}>u z7P{~v9}@*0*?!VN^WV^mywdTcO%bH%5;ium>(g|3WN#u{;rl5lt2AnjwbUfj-vuSz zbdEEZ-%TK)W~hMq^4;fH)hadwb^Rx&K~>p{?WJ@PHxsE3Y8(~6E9st_^)$^scU#?VdD334y)k2W_-0TvUJ0QmwX)i_ZYkf@AEsYs$61sG*b zv5}z2X2`Jlvhi?_p?Gi7xJ$SuOgIeefmszbj+ah*oJIl$hN56Wc68rmmBLF4G8(wn z8bd=&onC!!3Vw(oxUPmhwLzL3p4&K`VW6MJKv!etaPahy+LKC4xcl5O@MwK6bp+f&VQC9kd1J$R zil;&0HAzi3g5%urBIc{ESCa%pFD^#ZmOtG~)gS<1Ap?Gf2iS~{Y<~@YHUBUiL&S0o zVTYP}Wg(&`g%>5x`GD0n0pIyn!$ z;OG_7QetV?6dehRP-{2r;=U?ZLS?nyY&vrdd{0*ANW|?av?t&;6kH$wp7GYH_b_Q@ ztq6v$hZ)6q_Y*{uvVLT|`!NFA`|fGRyJsZioQ!Y2a8spOH;~fP`0*hmFLUC);`BgL zuqWB9yNBsW3Ebx}>$0PfL~h(xda*$#K@d%m)DSh;edVonwwV7hK>FG#HS!#IL z(EV(h_ljmcW7Z9buOilDPw*nxm3D{WLCb*4(;Rs8bGH2QU}**~Q-%c| zMo(RgFLNdZ?nfURlR&>1UZZ_1MN{yN0rt0=%X!`&0;tJ}o4eV;2Lt!3-rZ%l!D`Vp zYaAp624G_r|IGt%g&#I!L*w%rv=z;lDd7~~j9lx`{6(DKgwn47Ho^Q?9Js~!u5Kha z;3gpDJ>z|Q@J9InX=>ySG)mty{>2*R50bG4(u_X`Qf9(cbK|VV76z;uw)T0rFO{z?SCOwfzev8eTurns z!{@ni@^uBGB42-ufUwoOOC#nuLo`Uic7>qzP3@8n#-f|(ybX) zdxfNsuhT@nE|1DrzC!Il?AxSB zpyg5dYBdQV)JGmia8QnC3F|1Sl1f{m@)Zq7r>?_-k>^>9qQEMo$qi7%Oo&MNgpfruoBlDi?u-Q$qE$3^b0 z7rCqW>8f%U6v0^fDg(No+_eXFls_PM)ri(a?pnkDKAyr=ayKtMP>?EeS8>fUw}u3K z>IS(hJacuq`_)H%Ke_uCK$`LAK-y34M$d0pH;6$wy^1~yrR)lQ7CNr2&stj03*cN! zr;S`8?i!4@ZhEVa%)J>=k-5VW5C!PnTO}0JX~zkl{&)zI|16z$>wQVq?B|ntI`Rby z_E!W(>9+lW`BS>B0;Uo2w;A$RHtukC!FY*i;3@N$hya{-H(p}5ah%-H*-^?`WYdWi zsJ!76OOdtpS)9Y?*{?R7$b!C_sFc|ORA%?-9%#8B6jG_o<_yHwCyxDk74k;Rw4sjA z9cRs~A?C|Zi~f2l3FqU@tUJx0sdzX^FKtm;PBJD2T&KFDHOy}^pdwd=jI>_|JE7(M zzwEsWcvRK7H$Ib@z=%_Ku=zB$Il^h_DJdQg!L%BQ8YF{Y6F?=378I?e(kd65QMBad zFfg0V<|Zgwt@hM&$~lJ~5J?P5Bm*%Ch#D?p6sl394kncd3WQ7Y|NY*z_gs>IVlU_a zeb34BWcJ!?t-UVqdavv9uC3q>uJlDXx{8}ZM?sqrMbcat$NWMCuTU*4-i|?ifLl_F z2QDahC6r%(B77VIQ!yWCzT||UuKJS{kMRYl=+3&ldgx)$!@d0yo04NU1zKQ^A;)mi zM~Y(U9cwPUK#<0d^3P#Qc=~}Y8OxUVr6u0Fa2FafAeIpcq5L|hG$ihO6`fRta zo(b7Qep1hzGoZ_O+@kxD=3GT&k1L9I8Oto*aIH|qK%;PQC~xTr(SnuU1${nmDG&(U z*w*Pq3tkGKEyV%T+o`Gwju=f@3- ziciarYmIdaRwwY|MR-*@FankiETNt{FrrVb1IrL99r&yA<1=hbqAqMVrdM6KM`Iem zk8!-(=Et?hQi4JFF##a_c%B5nk4qRJKdv?OWfK0I@?*WQk(@g9d~^8?7K_#kx2wTC z05Ze+VvPKAZ1Pu3(B{Xd<2wU;=R1t<&Ue5LZN7s>DIOfFyF2TFEU;KlOf|Han#J-4 zhEj#~SgN6w$eO`=lxbzLBi5`~k0Rc7@)z>Hw%$5Vrn~5G$#l1WRi=BYo)7A^=j8R> zdrn>-Wx5U8qThX8rh95~if6jSa>^qc{*M#eDG`J^GCdM({uh>Lkx?iD*@l1E9FkQKSUCwi!F~5zQ&$amNVv&TP1(?a; z83XH_SO|vSgzKqiEk94@cyXctbG(O);#%XWZ~X!MH~qQrCz#{iY0SS6udehZ#{BaT z0QhHOI?8zdJMxl>Gwki=a%H4Ge-7dnq@EYL&Pj!8xr<7KyeDCrF>03d35{?m5>gEV z*HjG~Bn<p__+i|On4~8SOQdxB|ycP0gDk6JXDOa8xXTbU=5-VL-XxL z9|k||MIT1quc!}O%-0ER$JTgpyaf6wbkh@Ewu-zLQ>;eTZxhuq(Tg!RV3Sv|Qh31+ z({Ho%Ug$BBL7B@|2JpZ7PKh2a%3)kIFRH{;^(f5C)Vb^Nw%be}roR-?0c<~g^)VmCJ`RTmsKeK-wyE+9blo>cE-6Odv3g|;G^ehH$ne1LWLGSez zE-7|QC3gf=(m{23;S<=b(WdXBt#I6!95K8vS_&})llS3MD#Dyg5REt70bM*gLu_lG zo#w)*a%{(;LR9P>QRm(Q%G&NKY*f`AVzoISB+)ntR0n=SQNB?Cg*MNFwgEpDoR9&^x(_o<<`b6+ z^}l7U@Zjj#OG5oQi^Hv;{=LQ{Lj5_98;@87e~V4+zg5)!O`}rr1sXE#FicQcXu_hC z(hW83i23sgi`0y;lYQVcI5OoeveaPJO3WVFt;Fa_D`5qqmAn52t;ELJGiYV4#gyaM zZ)|<|uP{F`7ce>9{KSL5OVEc)@Ctoch!kXZmAPKg>EjO}ffHW#q}Jp2A_Bm!X?FK> zUt%n~Ptv{DT9i+bS~xJ2RP&y@Y^xT!)~T2>x6s2a%&BK6PSYGwfd7)_3`%GY=O{uk zR*X3c)-9}o&| zMp!IYFUFh$>&3jp*}_-sdJX^feqPjpsvERTStT|Lj#llR7p>XCm^aYt)6G3d?c~fO zyUdLi^F-ZLOx1+p;D)sW7ynX-OY;f*Cj$LYAvhRIfm2FN_3jR zZs*sdU(5uA@@|R3=N5~ns+N6CDz;}A{-Tx*>e;gBi~{r{n}42mJ*}me`CY8(*z>!x zUqPGuTa1FmKU=!Z?~);K+rs5f#IaCH$``IgOs`z@Vk9hZUlIz}>`ykVP ze34$M-zoSj z8k)dg{~8S))T5zXmurvl+>ORkf`F`6XNAIH5lMjJ-f?3o;VAr z#R*Nf7yTEja=qxk$lKD}d@wmaQWEDM;6;R69L@nTVp}T~*{<%wDQlYJ*p3H<3${!% zblUsPC)7eyA(YH-m3?s3+6&Qybu(z9uGHtT*pF3zdqx!Vv#?N7(`a!Y1{6Lg=10aqIL7O(`rF?SBwz#m+vZm5S+%;T=OvT-Z<4W(>5L$o`GS zOQaHQQ_fB1Mm1IZTScD32OYI^>z9NFp$C=1dN54}pjBJSc63f^wQw3u)hNP zCI*hi5`GX1f9Yb}z=H?;V!#s-+&93H6(*qJfCQ=7owc#lTkqSA5p(SSXD}}w^2Sc7 z?Z(m{U=Np$9RN!&mH=$`VG@Atejx+2-M1V1KS{Vr6nvY1aod&C@Pkj~^r0%|eUVEk z-bX}#%Ni9mAmelxS%szn83}!}r}-G+R*XdJ5m8C98}HOL6^(L!NmVzvdacXdv##XR z)ddPn$Nnd3X3&YgDO#aL%~)H{DZy+}=sc-Ou?&kBwn4siTeCux>J@gI+kC#o$a&OI zQ^H(|nluuiO;A9s;<$`|BdZ$g5)w~X3_~n>rTBTQ`s9Ew(kGV-_we=+2q!@bWfwGR zi{(6Dfoy!NMaQ`T5}Q6SKjy)nIPBi@dHDna?auZ!YQeXK;A`Q?in~V21SNdb5J$s} z6{FS?nG7%Pf@shx2N-37Qa+%>O8Gz#3tl=lrB1|NDjH_Xg|y-8*7yyPjT)ve5=s#m z%G@&a+t6sh2t+Q+T=JfT-DR>#lk*`X3^%rPpgwT1W|tetC*x!I;Q{VP7Q1A**e!B? z_-Kkbcc^7yhpxf4ADO-2mbGh=Vq2PMZpQSloCx103Q>{Xw)aAB08y0Q05;HDRgB(# z5TmySW9bXaEP8uM0-(1_34q@In*q{WgQ0Jh@R`#aOd;EXP;*8^mz!Ylga&k{fzUXh zrO+m!Ixd0Cyh6}fhD=C3D&lz#{65*1f{cy53@Q6cNYOu*eXDA!*-k_(5YifEwQPwf zMP^s&T@XB)*;q&IuPros3PkqzTcdh>8MXB>SgdQ(!D^apxFJD@BndSl(Vt$v>k z!ueQ4#;nSC*b!Rgx#rvyi@->7eW|O>RY*oE1Ifuy+9a0~+eK*GJ5hRr9YcC+vgnQ5 zwLw=R-yr%xZ;*13Z;*1Jw;IyhK2qxbNfy09TWmCzUb~p|)@CdnD*^1@xLyJ+hJGaj zq_;*xA0^>tNX6Ls@kII7Ch{#3FW<=fy6+T#wnq7u#>Jx^^P_24DC#cZ7^fDGy33w! zHHw@&ZIu(YxO=ZNxtpY8oqe!Npf51;)V;Li9jk=AiwYIo5l5|^@-97;S|>Fo2)uOe z$mk~V7>8bBJBHL4BgNu2k$cowWi?Rb9uX~ZLx@yKxyORsJp~`5(aUHfz3?H)IP|iv zZ&$##+mj22ULyPUWn=f<;(v&dBV?Y)zU|`jOJpAyy2w6=MTo;Ria}srx+NC(Wdq}b z?+b-O@<1Fm8fAh(@aAQU!$xB*aZkkIb`ghyfj(f+O8G$WP)Hi$5CjHsC^F8N+-UrU zxGCbW>dVDpT`r)CiEff8>bFE9>V!y)h)9$nG)TA*iI&z6k+|_oL}J}F*gaFLXf%3$ zBG;COmj1chqEEmF^toQ>6Eqp6Pk<8iDf*|P&zocP3H|dw4U0biTLPfZf0qF0^S2CG z`sX?cgFd7FO;3lp9@YS2R-0&^)3(?aR>-Dw4DB|uvR9$7g7!os0td_|OtZ3g9H z#FZ5%7m2XZ^;pc-Q5LYK8^{UrL6+T2Ruv6|wMJZh(TyxAADg1`5p)9i7=bMuFCRIw zU_lA;5fxKDf;hMI6p-m^{W@W-1cVaLf?~u8Z?Tk<=xdyuw5p7@oMIPMQckjP>1(2( zWHkDkpf#{g#exF9#suQrtt}qdlQ=<%`+6v*;M|Hhfp$WiKtd4bZY@Y86*W=ms)9Z- z;>7J#6rWIH1^r;$QhY*z6(j`FP<#p=`q(pwPf=Ix9zb0sZi@I^e+uy_;6Vb4*0RPq$$3wnhNg}tcg zl}u06e$cDvuZmu8jL|FP>9P41y>?0f^qPbf2wIT(r;M@W>0t>c%2QBf>IlQn4UQlq zsC`~+WK64b*I~U4h=vIsfa1j{*+!K{E`4$su=JT`Eq$8nqei7#_q6u~3+-{y6K8)p zwF4uH0#4PJi0V$!Mbwu594R*)T#8-1$z~EVbtC}g4tS7eeX?vuh^}&AK1iaYU6kn~#^u-d z?M0G)H%6>bXho975i96QBu2?B&Ca0_$Lzq1~S3cbC5wM>>%!UpmwIP z3AB?lONYB^MhPBb{xl1=LZh)kuo2w_Q+|vHso0|0b|Hw#9qq*pp_{mHZZ4M{{D=zO zgdMlo4Pzbuz$W~L5d07OK<=0{MO)5Qh9s7mphf_3(1iQhgkseEypjTORY@h=zr2#| zsKgemw!UfWzh6bZ0)kO{vxj^g9-~*t*K6lm^g31o)PE%adcB$fOTLbh@K=+skek*N zk7a35Owl+_e&ZYCdw8y{2KN7~6MGrG?sc zLHRwC%Dlf$Gy+lIgn9NtZvH%QhtpOFx=J5q@1w96!Qv)-WGU_(SgSyX2dovt1zA_( zC}}9Q-0oI6>?qcPo!;PeS$*Q!4w#Cq?b>@h#Jal9UTrLdM$k`I;V!pm)mmp zTlD6AYZ=Z33CiOYQS}xQ^vW1f#!c;c!YJK)DUL6E$O*ZaB6b9EA>UL z5eU^-yC1kBf$isySjYxAJs6$%CEhJa9ZvKpj&Mn{Qm_xF9jW!tjctKgAL@^#d7Rq- z8@Hx>U=x)ag=oOJpj(&sQR0VEo-N^QkCrlDtyNPjlA>_;C^K%`TUD&^K&=v>3FlAG zgdR_;?=DQB$IWGm9`*lbKvCb)7bFt2`H}=co0XE9NRNr~lbQsuTxotX*H`u)?(`t4 zxwzE{J8QC@gLs2TCCjq}CV2TpmxfwvT9ZAm0I{G=LRq}uCR=j)^RXTkN`HupHy^sn zK5T}6jJqEKg~o|fif>e(`fGE!s3KV4!@;#;8V{I-I>P2JmzG^4JD|pZ+3* zgbRl+u+wk760Vcm7i3*>%HCV^wUGZkdfy9y|CtLjYC6fbU*n`MCQGcj+f%E^vM@-p zQYx|_rc#ly!V;T2rCwY`WK}Cp#$*tmOE#EpH&zPbqO;gG=?=&|u3#{*&TYicw)U0P zV$Tk2{xX&cZezW4GM0tYZ!y=)E{_F+u%}{u=$x81Y{$XMu%|hMd3~Gef$Pv5p%whd z(z|d5MbI6M`6g$d3Gj!p^5jZ?hyYgy<#^NX2plz_I$yj937HtPdw2j}-Awfh4W8xc1bDJ2s5zH?bzR!&%|1pO|-fS%S zqXhODOP-ZLld+^i0=tc}-!b6BrBasvR%|H}r2{f0^=j(V#rq65PN27AW&mQ;<%VXA z)mBU{aryCFbE9Q|eU7bxp_@Ae+A{TKO#YnHYuM!nXU);sxRA5U*WTr8>++$MxTT@d zzbH^UxR>(_gJK=t64&8K&knPNMN6_u1W$;#7> zI~%O^BVN7(^$L1J){VG`1vUVNmrQ}W`9A9AgWu|5*i<>wwzAX<} ziPVBoY`>gL)Bqwsx; zz0QazKmwRe0=9d-(C&5o{S%5|VU1Ej{}?0{qfgcjA8b7M*n1opf8BT=%&o zwHwQhGEj(H2IKv62pb}!vX%nScVSebZ)lZimcmL%0x>qFK4|wvv<1=rn){_*3C9|W z3BcWi+RR)GF?lIQ*;1r4qn*aBA=~})fzpZOoVZ>W*MB0A&9Iw$_8*%XMquK_SmKuM zfr{JjlTkI6oR9#>*&#_F=cA0lMT^n-A^Tok;rS(+-!H!L7@hcfzgb zhtgrsfbpmIwcp`IrR^+SGM9e29dkKcF^=)CaTTWVrl&^(wP~jsZ#d-liWF{R_nxu4 zx9D+p%I86=wV)bLe=&l7R+!W&uy;k;7yXRA_@}1D0vX3;a^6<37{rg)j z=EXS3g}tQjX&xROl{+I+19*EYG`cIaqh`OGH`{E}Dz`~eO4)nup3g$?Cy5dI+`kev zy5x2!+)`wZm-p7#xj`GA;8%e*k3v^7aPUpWUxBbuR{g6lY0Fl$ zFRBlrJvU)|Qv@Qnn)61oMe`nh3_YKRgEGgXS)++`hKqC7A?rG`@^7F1Bvv8AP z(SxoP4D*CD+>1*q*IkNM8d>vPCiAL2g)a<89M=+FxC8+heViER~j|K7?r#t@1+GlhPiZk2f|*ds3e_HbmRALA8fd zqh2n_SvwMSX-_&Pt_FoJ6z4~3ejhW4H)2iOI!xybjY=|tG79;QPGbdu7kIy2mp}&m zc1lukCV6&qJDl4x{XO`Vb|YYpaOy!1W2y;ju;wN=It5pp*i`4#&7)%QrNhyy9y}qt z^1QtFD0n9_gV#xTiiF{hD_IX_Nf<7<5FUy!eC^>EaDtCN!bKZgHtq_HLPl^jbA|{d z-CQMM!Uf*0B}{<8gDAsggaTa9F>K)?0S6D@j4@e02O-7nL8*7)O-sr1I1#=~Qc`e} zt{Z+ZXXJZuV{WNA8?m_e78mk1uV8M3ae;30lgzE|!##i-rf1+z=mUSW(!tITR9NY_ zf43Dkk+(Dy>0jgb?^P7^$o7yZN@#-yoh{?v>hH$rPfkh(0f-fI z#fH&LwSoCXpe%F@lL#HBZyUmLaA+cFASYS%6&wJgdKG`MlkUlt2vFO8lBg>yqEC`M z%ygHrqKZ+KSU6p;R4w5N)VZJJfEg8n&w>;9@YV$qYpLiPm04ze0n59~o;*`g)Y4%{ zz>EJtEjW>sE}jhN$eEoWB`W?NYyTAN%}&bwDjguL|6Mz96FVS`BPAdlWlBJp$&@a0 zFku+%gL|%^{=roAxcUW?_(8%8Crhxq?WBlohN7Pq2<=K|F+U zo%aFU^*$ql=O0-j!nl6@K!x>9lzk~yid5mptglIO?>&k*aE<0L7#eS}$Gb2zFv%E0 zQ+X9btCH^&LsMa4s9!!r=R!9zsvpmyhGgs3A_De|1qFRB0}b)pE@dy7;z-D9xR9;wOt zTjrR7w!$Z>fMB;F%Aa0A&TFg_WkRvkb)rmE%x1i(cuEmf(+ZW>H5>A|ObAwxWQ=Ml zBK1+NGTV5PTp3GEhQ*jM6I#K>(eU1=PIyMS@ZjW|;s+ zDz;-p*Al$5V+2Smq_;|cUM8SgA(F_75$#Jfch2|N^5foSCG;>2albBTU{rJbxjtRJ zn?1s`j0iz)t`Hz{7MT+?8`VK|DRM#T<+c+zH49VGgm1+;0iZ@WTU!7b)nDoUGQ(=J z?^^I45RYLQCBuE~ML&!b9CZShsA`%^fALMIi4$%s6+me+H{q zv45l|m6rX}z%oSF6#FL+ucVMgarO_hi2YOITEVbo|41v>U5ZxruzwJz>>mUy`$s}C z`$sJ)EgOR9uVnwkJoU(>NtO*Ht-<6AG!ALaQfW=^HW1q+Hjv$>4OdAhW&dVt{s#3{=bxTF-RaK~y5d4x(}ps3y!|2mK%!OetyyDFs8> zL8-`q>DylIAb1()=lC;%gaPcG+lI#5JLsfs;|!PZa+Vfi=W$JkgxO==6ig_)gyG;q z#9R8C7`8EcXEy7w?47&#wXeIqQzhRjdxyCpYsB7RZiJ~YMC~0by`2h!l^#_XC~HQm zZ_dcxQS~RN2VdFV;kWR?F10FqN0nyTJF1Dz)mF1@^`KXKhj{=fv3K|#c1d)zcT~~; z_W}w+S=l=_j6^7(3P!e2o^1)`LqOTgnhkyNP?%=h3xs|TduJsfNPCCaEB4M51jI;a zlKiPRSW>}a{jrsYCmWDqLFy$TvA&H8;tcVTq zmKD(ktPfKv%`$y-=9U#pLv8+@(73;LxOxFFCEGy4AtnATBu&la|md(U%%W8maI#83L-gu6f4peZWmK6); z?Fo6IzOW$_-4%;vx;vx>-TtP{P%Hmj(E*k+Z4MNe5LI*a1pqB+`TRT;RceV>BX z&Aws}PGMhB5XerG3N}&fD_M*;V)oTZnFNoYJ;TJ;cyN6d8)sjQ@2Ycj!Ny`ia>E+? zrv+z38Gh8pvH_)RECndb#u{W!SkTw-4<3uV3&NWjM-Nz%PH+Ebv9QN#RcB%(6!1P zb-aBASGU)88lqxa`%UTn_S&wxB%lpT&&BO2xLc782u=gk3^je`P&U^7PiSKiQD9^B zL7$b4r9!Z=e#MZov7QAgM1F((<+U`a#Kwx(FKm0O=X%qwn^4IA)OypPID2b1`gzLr zrh2rpyS?=a;>6y19RUm=ZeQ6Vp&p*9Uqtk&Jypx1l=6)F71o=iCB52O(jMAcsy(o< zHpJQ^>rIv)U0t;YCvNGin%8`&^(NdU%-dkp))>D0U$x%U^_@8Ti%_!Hn+O-%79&9H z^(I0galMIv```7Z__dT2=pp~R-h_Gb*uq@Y{-UtKORk9S%jBi!nw%}VZTsuX*PC>i z!IZ82y{tD)AvcEkVNFirD4w+h6+0^&osm?Qmsn;|%j<^3^`>r;_phszcM*$71@JmTSdJL z;u%^+ryIntYZa+hCCmYSWkXhd`V#6-ZM~@pNndHbNmK!~Otemv z3ClD^P}5tojTPq%YTd1Kh1CMYz%*!G)Jh!vFaQvuLZlf zUHsK7m{7w;e!9VqLhU+0jU`6+@}J+^N)y-T5?7i&_)~19=@?d>lob?FAy`2JIuNI< zptZDuRv>@eN|UmJZ2PC@deg3JsdJ{WYk&Xsrcj*y(|{(Na=ob@t?Xg{AWqpo2w3)y zgnHUPh(5LbBa2eX{`rdQP12g)Z6LNuY#?cg*g(-XCE7sJrc>EKvM7anvtR?UP5*yf zZ_>_-w|CGR+s1iC!XynNv_--)j}v-P!W?F!>~)6!cfE=FyNC8p6`(?0UhJK_j2rH=6 z01Tk!@%LPBx_pnVjeqHSlZLFPv8*n#l22h-eS^tS%ZfM?Z&?uoZOe*jXKq>Xt5aK6 zoQb7nMb7`1SXQc?Uw`r9Z@S(zeYZW9L($#dEvsvh=QNhp&#mNBSXQH%9JQ?ML9{Ka zUIy_DEvwTF;@7pT{?Z`>x~QFes-V&v&S<^q0^72(mr*=D*PEI!T3^22BzlM9;OnTx z>9$!VVbNLEiOyo1Rg4#29$m06gOZKWhkZprEBlJQI&=GqB0}t|lZloBSDIL2bft+V zms)9JFXL94{5@?f8$@4YrAdIJHUwE~MgpRQwI`+Atwb~I^(m#|3Fxe^l%gjFmVN%q zUT?}Yss&cE+$2L*y&h$0m9(!2Puf>??I| zBM!XFN)t)s_WiDdUqIb8EEVXQ-jx*Y0@q zJ6-j@wz8==JE|O|Ll6~lbiwp4Xfc=Wyaxxxp4~YOzZ-U9HPF;|{uJ7H?7S{q2840{ zg?@pKo4ece3vudJ-oI7uizMBK#{1fLzUXw|pk<)m9jJ4c``Ruk0BUVcN>2LEuC6N_ zYK4{6WsZLd+6R)Z}~CqM0>8QG%2(T z-ZDZL1~$X%rrSzBD{xGEPGef=0-WF;k$gPE>A2#fPcBUIZ$Jfg(rx7xI zR|9Qv{=NJ>(VX30d{0IloFbVU%kS-*mEmIpoI5giggab;jse=ZSKu9_%e?^Gc2fL*0$|4a z{}6LzREC;R)m%QJ=TFDO*L184pRw{xo4iUAkEdiDGEmSvuF0$QNiSC+ z*T#$vJ^$qzoVyGh_4t=$)+F*HBR_e)F(J8DFInt!!bvN0#QW!k$| z;m$+)~G zaj>;9@3y++PA5+&9ex~8%AEO5GyRmwhp5K73KhCrKHf0r<|2@(!zxts7X! zORA37SO>0l^}w+`Jow^^{BqZj!e_$AT+VIf$E;6wzQ9j5s84qA6S%MUgeH``z$r15 zTJRmPg+T52xK&{rzr1i?q-PD{wb_%sdWZgYr80Bkbj?NZ z#LzwBYWdph98$1a-%a}GaL@&+T^#?& z54IQ+fCM(($vEVEO)o-6 zCIwrD6s{dojOg?A{NQek#hl>hx&94Nva;x@$|y>%0ZE%h=eR&Z8wrl$waz!q)Jwy- zsCcq>s-C(92cj@SM&VjBwLfCftt|sHI>VnLRJ0{`NWt3hegyNkOi>W`|2|MV+QK1V zO8op>pzR{;p9$1V$=uovzqIGaH*3$&d>XeNXYA3Qzf606VvRnzA>%kMM|R=PG2FnA ze*RQ_(yO@tpwUdfkik7e{EcYBt4$fl(56@44n)dE1UlUQ=LBZa3d%@5;6W-(AT0L&p3pe8=Q1y(1`7VJ3htnQ51ZQ$ISZHj!zj%$#{FmC#d9_ zv>^qJJNBcu*9^?{|7W1~A~kGL|Eg{ZHvB~aZ8Za814C%0!Y`iJ^k!xrjy6w?H(U>8 zf>902IIgYP>ueeo=uGjq;(pygI0bH|6!-AI5U6$ko$4z?AO5!Wc@p~9dwrQ(A@0B) z^#;JFAK-J2f)9v|JCG~qoa4->*Vc47-(>`Dc${=jQpOfS@Hi6tfm7z4DQG32F?@*-kC3E5+XcS8sv3TsRae@1*oA`Zf!S zfF4b{=7Q%&j|AE>yIOx6sI^6vv|sd14>sKfI#TBJt3n66_HRVfEWLHEXC}`hLd9bW zT*Zk0A}~<+FFF$L8epbhnR%QSxIe$~CSs%WU1Ks{CfzV4`*`t0E1avtHK&RODBpEW zZVMmpKehaLSKq0d@UM+~SAX}&yHkUQr)p!4BjZ#f>jvSXIX|ANtvQ0`Pt~(-ni|OY zv7_iby`dEzl)O`+he4qFJqX;0RDiQ+GoGT{yG6dgw!^A7chw?h|W%#=i{;7n&E#X}qjQ_rbe}9bOArc;mBJ|L|NO%hbvL3ob!k3)Q z@TC$CV0*M48ZP0Vf>`v>RT4fV@gpU?OX9DQ@JOOi=*JTNm4wGh*oBVjp&L{@&XVe( zn-Dh2UdhC7562mOsf5FKhkERvjSp=2*!Y~Putijq>%c@ZonQvnIh_Z!%2_8QoFw6s z5_T~>rqj&t?}iM7BNlU+qYsGz{G>xa9{#}NJg&bR{y4??uAVb2P?r+u%!R8hdczyj z^#T<-Y#N1odq@VoFFt$$T~nu|<;I|#^IY&*T6v-K_<|?W9vYeC2;F>AtGv}2_uh&3 zq_}rjn)kV!oeQ2AD)}z}*Sj`w?3jNI4%)z1oK`u$%S^pitDNbCnv)d%1UzrHTdSN1 zWXMel;ieAU^p)>P!lgc;g3nCvC^P?T^>Wa3Pc-xTCWRwOA>SeHf-Uo~t6LS-gP!zM z_+Szqdr&GHjkejfos`;+B~9Du#2@MeXeXXPDf$vGN|9PoQAg6Wt<0c@(k1p*Ghd63 zy$G?+<7WP^<0EqrsVY2y3Qw9@=-%w(=A=uL|z!2a( z3W1q`+-x}I@`P5-WZjc)N^;_+t)$S(S$GYtoWjWbk|ZZox1><$UPgv)m*4S{bbpeo zAR=kMlGr=s_d5B_#V^>HnLi4d+K`F$gnlY%*URq+=74{2GEKNOYOw}E^4%agu9h6| zcZD0)M!+K;4lr^sfIFe`kxXMRQrHo5(s@o^3!8f)+Vhik&p9ZwT{>O+5FB)$g$TIn zL%)B zNiJVAu_aK1C^K&?-dp7TPI;e|9(gFn76+?%4)eSm_=;OBsZ+XmEl=)9f< zzLrp6wA3)m%u5oK4@{JL$4D#$r49a2;4VqHS$?mT`=7jUfQ9=(-VkYkcX8t+CJB&HZXiS#a`)&4O6ie)_5<7~}P^^YcF-j!u zHv9^haK!>JN|=uTVTPUXYv>DRUY{rilrn+7U#xfeY^i81as)oWvukkGW?nohO&o`{;R|+VWGIXdIHD_k?SP#X-2{oIYwu~ z`G}Vi)=ExX<#z+Tfmz^?ga8uE2{$L47A#oI z;@>lJ@lr?nZkuc^z$JqJ5!!K$#-6e78fj-QCRuTvRNQ!ZtHUMq|zrFv2G-WOe zwEDN4g*`e?VlI@B#xzPo2yNFAELg1P3;$FK7pGw)VG!ukIuk&p8C zsehN>Kj2qy3O9S4)b`%vRaJ}EBQ8*z+M7N@hf!W7f9c%}oUJG~bEm#b&P$6I=JT9~ zt_~ba@qfmB+(qe`JEQuIx?wMx-kRjx8`zT4Iz(;wJ^+;@bFcn(+$}usKDkRQ@;ER{wBw zse_(^ZM&}CJ**Ue^?AeG*3)A>y?jCyPztVpPwS8DPviAxc%wb2rS!%BIL|??zk3*d z@`rh1-@U`0`LpmX<~}kHqrP(du|DhRv7TN&W8dv*y~6$`u|D8T&ZXUSmdo`A-TH$b z{XzCuY|=N&!&DIk{!`fVA{?8?r`IceGh>hLZ^y7KvBtxNHz+i@AY+K8^x@7!&}5Qw zpvk0XUqgleW2g)=q_4I5;KeHiDiO+y6kxKaHA^6yOHU>}ehC z+{(uY8O^>M*yz?vML`57hu*nas{})6MA#)^w}g`=+=t;YXn>i2mM7fdhG;g+9B!b) z&LzF*pDFsB6u00lYw`anc-a3#^$AXB$4$sE74Ww3)g$vtDiPCunW(ur_xGo-#JMT{4B5fqU|x1)_@i1XWaj z1rn$B1Am5hbmyCN;`zkzW!XT~i5*&Hi8C?k7^0FAqrhNGT!~RoM@!s^QDDj?$%#=A zR3&{9qo9hG^i@&IRU=ZYUTVP`U?H?#4xEN%C8Y8l^rAHbJq=z?PGGG9bfXu1enlBR z@P8aUT;vMWc?4(A0$h*+j7RL5;(SDK9-75pfb$WDKZf%t>TBY>hXYAjkVk`#{lxlZ z5Buws`0x2T_^&>S;%D#pkNzqA51ldot1qJEL(CIDzZCyN07alU0{l+`J0$+^2Q*-N zK+Co9AIP7)82O<7N2e)O`NFai&>u=h=r&LQj83?G2T=?lQAjL^0H$a6SkS?(t{$-< zgIuR?HNvW_h&WaMHykQM!mk`l0`=-vN`$ z&OAJINxeH$@taJ=Zzz9>DE^NEwdtaaSf66XYdqrj@5byyEb0nGwZ0Lzet`Lc8|gaL zOYf_cZ&(@2a)Ow!v8%^fy$pVs2;AeN>Ni}2fwLL8SDSRmVt@wmH9E& z|3ka}%r5;EyPcKpE729MFw*xH+fc6Ba7}ix$KOm%3XT4rG=uAr3H6t={_A?wAN8hb z`P)oO-l*!sz7SP%I)$yHTyA&4V155Kth8a_*g;l!qv;ajzY>$eTPuiw^oVN>J`9}Zy8 zD8O$18I4o5S?_Cb9Rkl@9r&NsjAQ3B3Rg|lKEYe5WQ0SoSpkT81bz=o z3z|e<;(A9zm)nq~-h*7~)q=A@B7xdTg6+iLK-&bXHwEZ_!i=p^=VF{XgNGo+BzYV8S9~y20>m>b4BBkYJ6b&Dd zGu}W;(P{DFf>pw4AES}*<#KNeTaAite-{z(w|4IbZ1p}gbTV3dU^2?=;ExQ>8*s+< zvw{XRYX>U7E(Ouj$d9D8hqRfsPfXQj)-)khvlD_Bnb7aOuN>57ZiNyub88brvk^TS z-_C4A^M4xF&P7tm)~WjFK6t8C!_jF7)*wp*#vEw~IJI*TQ3CWRc}I) zYn#6xPHKo3=+@*a&=!oZ31Ckcf0|oEZ3Muz_R~kC<7W&?zXJd*0f45DNyQJlatHcU zvQ5h<05qnLVdm>Rb}SGixD(0!p+SSA6+MX5n{&{tz4&nY?Uy0c!XhwicLN2c-<%aq z8yc53V=~IV8^8sAG1o=WT!Z6s-MyV@gQ95z z9etv^oRi2~TG*goKBR9yl=5LQ>qqe)0s&6~5l>D=j=Oy*=kCw(w)Xd`zo`7ARryKu z=fivW845g!f;+4RoJ0dU0F+rRz?=@$KITXH(DgPi+0R-dSwgA@E1ADo4ZOPb`Rb4f%+zK_UX@(Ywc4Y_Y8f}@r@5cdnzGP7nZB9K6_LGD^d z#5=k2sC+)772!7E-G^?vpx5?fD5$ZGbv4K+#jWyuC=JEPcCJd3@Vy@*_b>lERr3P? zB$_>BMjZg;tPk9HyBWz}lns`=on@D)Z<_f{4N^y>VcetZzd2BbPro0bCT>5%My>_d zx(aJt#T%{t2o1*MT5CVTwjusn?nl_J_9MI&-H(6~^0nZn0MND(XnFxga5`^gut`H$ z0N$rhMo*^yjQAk+|628Qs@K(SfPP9)?4 zD*J&Avs(Bz1pwF&?l$W~zTK5(Z~RjFC-5EgRb#8P2m`?n>}=I6{Sal7#qEN8o#dpH zy)y~*vQ15BQxjU;3jV|~zKbZ;f*f}{2jaIVX&~akAez8kn?RSXpiB1Qu6E=DL3e%* zoJD89Al*jr#K3l<%+CGz{}d&pQ!&YR(jVKPBqe>M0;?O%-hY4A>sB=X!TICr<;9B`}&xYdM#X$6K% z5xm5h0!KTyBd_4qoq|^v#qf$)O1vUA16!Mj;rP0hoYg9UI2FYm;9uu1;*IL}1cf(X zOeKv#md!D|*$ljaoGRHFk2jdGh|-@>^Yq*-5dUbngxdZ6UCeHw8ZbIXlUQs0Q1zOaJ_vxck@iP&Gb;n!a zH?QD7jbZhb(gQ{GyoVG3ujC(*3Nj-|$aI>v;2)qM5r2WEb>h7fd|c_NP6W0J@ie$B zO;v!cGMZw81W4qW88yp?sy;n z;AAtP^xT6oMXn<6-7n++b5)LLfGCG@q61}jSNy2+#cQ0(&IBLp*oM8wS_ZH$@R)Sq?2CmU9wV zNmHZ4Do5)50Pn{Vzn}F1aRg*TE%OV2ZU%Jrd)QcXV%CRDL=7GIpFyPi0s)F;sSeFh z$ci#q?iWXq08}G3C*mGRuJZ^m42_!kniH6Wm%)1!@7?7@mr7oD0)uD1Ms#~c_UCjB za30S*j`ct1Ti6qQwHAC0Uhmaho)-L9dcbe6X9?{oEX#hj?ze&2Yh2^TZv4oEf5W`$ z{FyMc>*p8I+{R!1d`@cdFR+vZ0fjNH;qWHnXW!RLq3CAsv4dQvYM1Zr@93gcM}ws{1XGd$CySL|b8 zwpXuiKtMlwu1BCg*oI%#goqW=f){!?-R{A3 zdmcm8EFLeH;>ED)8pKKXf09(z36IEQ5EqKA%oyevqI2hX8BE;&!TEqsVbB>Zra43nHw#4R- zt%+vCWQCl0c2%$e&Q~HOC}y1h-9R;K{AuYgRbW)JEI>eQ+5B8=!G`?1|LGGNCs z?o4U@hKe-ZFE@i$Oq1Y2ktvu+_8LK{IS&U{q;H&DHl%UH%XyEm$^O22-F|Ko3RJVp zec-zT597XxdPO4wMc-HP4!>3}P$J6iABJD`s`2%^cm@Bcp#;Ex1OBVJXn76r z1&6dl+7A>-3N0VfZZ3QGO(*oJ{=sJ?H6`=`-nEMx(x6No*s5I|PTT3(R`$L#wBq;3 z5IGP0%PPFXrJGM64)R?Qu(=v~#+NzE;7cRZea06eI?!S(IA~T#0o$yHlatqc2ICITtU6wB&4I454t@))Yk> zcg{%)g+u1^Kz<`gFv#sCL1_>mJpxS9lvHv<(~ifw4NrMGBD2s$RWdG6z}H4rAFNt= zj0%o#>m`QCVIe(zDJFF7F)EnZ>Vf}97IUx`mdpxiQr4hIC*Vw0Q7br|f?;+Dzii+C zI+|pf4U~Cu9MJ9L1!h-HU=xY*dazNtDVP}Cjc|RCx!DsVNOINXGMQ)@k?Vhhbx73p zGh_)=^9x7G^_lP$!)vf0Y~~WRkiv2uB?B|JlAy4Dn}*%9JqvIDzGdqcrU)k_Ja|2;REq0ixd_o z)u?l+Quuo-h=>uUiy~kITO{0qvMfRY3;4a{TF$uKiO^5JZJ5*=oY+Z~5{xj~$4ymb zxlqPpZ1f&{g@#;asFJb3Sx!9(Rp1M~oVt`@=_PRA>i`GNy$;`8H#j$Y zbLrctt-dS*Ca8*SvqHvbx3T1Ij5ruXvOIy2fz7Erl^oezKoV8$2c2latDvCSw1VC$ zTJd}8=SAB)&u*_7Oyj{5Aqh8kvPJ%TDcMppph1Q};9mbQ=}=%5`UzoW)(}>q?@M^M zgnugGjS{|1!VL_U{hZ-o6~bnPl!@{VE@gS1&&g7nkP<&)|Go%)j2pol7bLz<#k=}e z4TW2KBDhbL5&6Np7@10WHS-)vx`gV3wMgb)=3!_ySWmO$pVD1Lh(On*gur8!daP8B zkb2BkkGs@kA|AM<4TZuHAN$}QWCj@tT*tj`1dYpEMc4riz1ZDg$wjuCu8u ziJ7~&{ZqzrlcfZAmh{bjTO0Sb-hfSZ1EJ3zca{>*&ze?)(^QVfjvNOAMLF3G+PEXy zIOu_VyJmPb!Js`Pm)~Mfi#3Gc%{Q2=nt--JwrGY(S&o1eWhwGsQHg(IORV%SLInC2 zm?F>sFx1;oPrX2%7#z2s!-m;t)EdPFV+B#h0E3PgfExWvrTN(mhl%C=RKAsA@_1C-W|EY@vw~uM#j#;?f z7U=4R+fb7@_$B8XCh;UR=^M>~3XVH2R%61*>?es}TJTe$LZ;xf9*_do0x>~0mn!|% zNDVnbQa~f2qjrUVAW|3v!ik{gMdpj99GrsEEUMIBv-!39SlWD08+R~DkDYAu;nuTl zdhFEehF6dVOTKLuG!sTK>i9mWLzl#EOe>CpcD=1ANLUs-smRA7fVxbo?0L4WEtk)N zQC)`4;xSk~($vGF9!Jp|q(#)DNg#C;*JLGZC7 zo!s2_khI|;)^5iz9H?fUP$P;tpTyGAbaNx3>P3E_X^stK_Sltiu`RCx;ZC#?dCIH# z%ifoQG#L(TTtO-BDB7#ukG!p~ct%PiQ)N!z>jmBDacq~#R1|BhU|_fuRnjk7*gJ|j zo2lpOD>xE?V@Y#Hme;YkAr-9FN}qFX=Z*u{m``3td{dapU%maYBO;Sr(rVr1d@ZoW zjs2B|^wb<-N&n26`rvAm#y=a=`MqH>c7!gEKt~_VB!yz$0I`meADJr#V@OOhjRO;8 zWVim+Qyw{R8$><16y1=F#`$*ea-|xrpwJHP^ry7m zksz;O9}|O1E&?I2>xS?tGv_>gOU5p3^t*`8K{VV(==B+IYNI=|-<|V{zA$(h8!Uwq zUD}=Nr3+wH>`#~Ad@hVdc4*OT#8^Gn7Hwi{YxE$Qu_?KAlWj9ASiJ=ak*E3!l8}W3V9z|uu%FJ%74h2%Wtk5jO(dTiZSLQ z-CT=+wq{#)xOA<8QNuR6huNl&`6{HUHy9QC;K-*`n=Lbt$N^b}spz`Q zP8>?ld^7T|P_WNBq6PoiP42*v;B3lMEGNkC&0KVc$jM3XMGr_kTO{$MyTDO2qa7u~ zYR4;P@tBHRysZHn-Kh)AOz+F6-O{H`cTiqreC>)lG3ADDl}hA6dW;_!f_|9oW!Y}b z%yWPgF5@+GYkhDu(1JzQ2lJz$@zKx(D?|pijCP5Qz{3_yT6_W*ld;^K%NNX9e6;33 zvQ~K{@R6%)ZUqZP+=(7>Ig7hT#R{~`=n8y{GOAgInKf)d&Z6$0m{~~+<}B(_p^ENN zr*rdy)CD!4pm93`@1x)qEV!mMx$Fbi(47IP#tkn~Z&x}4)dT@w_N+?^R1*q(Iauim zR1*-AVpI^XLs{p5w29K1_)yi`T{3={<`n=FE-rz(Qc2)rQ}R;J3{(>>lIGkMs3smb zOK!8qex@@ZsM865W)`2)!#Y+2WBk&nCax?xHgHonDc1a$4`0Q4dpzF zdFr=Z6-1^k!F)d)oAD!PW08NH3nP$AE@=uAfSZQ!rP4n7Yw&w8Oi4l$=fkVXm-Gf5 z3wf;G)^`SEZ_&nW$v&jzAHweCYyF>^H#)Q1HD4p#R-=;P!c??{9|NP5zN0PPi!dhU zk&1PdXYrCDQeAN|v?iJMD^_!mLDkxNA?loqj6gR{WkX%%k|Py_q&H-=Ppcu;LU^!N zeajGGGtK94 z@&$H-gAbyBIJ?<@Hs+F1!2Y^+SR$KbV*F{g{MoC1kC}`j%nUu7r9$xE_Fab5JlRiB zNn{rDi;--GW-v`=o+Ljt!m^(*PR%?GV*U}xZ!c}i6Z0Q{81#_TdZdGDbHRT2AlW-& z>yi0-L1Tnb6M19no{ZOUrl7bvdz&`)i0*GtOJiKz#7&#J_};-555v3Ur4{>k{6ud! z^3k-d5C7qrI_C~JxnWA-_Gx)b+)Q*fe9uus2N+%###|1no9-oQLD2NVDOv4~i0-Q~ zukO-)8|!`8Q7H1r*QEP)@Bbm*aMV{X-o1Y~f{-_X;(d+>zHj*U4fmyM3;zj`<;BgI zTXv+?3~~mFn;b<+Lu=riZtmGgf(tssw-J1cr+&Tt>4V1oPdO7&Y9VQhYXiAsDIavQyUX)hSNzMZdCx1LAu9wRAq+F z#$=g7t1p&G2xxUa;}lx0MYAKHlydJT$vR=Zd?J>WG1EE{n=<#QrXoBKIBrTd;SeA@vH_~oIU$NsRdksWt}HvPNxc?3IG zKQj;SUx1WA@peb)#hEyRx|`>f)?zrjMqzL<4+iH^{!|N8*x&!H(u-dLnmSrD>$%Mz z?%cLJi|XJeNL%Bt84IUy_+BN{z{TI^t^b9c`R08e;wI!#*yf{$cXS+iOI!1rUa&E6 z^pZJ!UkY_;j@I)~@CDjaHCiQ{fK;%hhQDUlM}guRaMSPOy}Xn8s`#UgtV1u;tMEuMeCzS>f=%J!HZVH$hPYin zn9+CzDPjYEz=)9w^xYj9!-;=?bD$II(B&w*-nWkx)%%+G03lFd<%IO3FOdHnd4F1$ zu%;z&$k>cSt0@He$fTjyVcf zmN#WLY9{7Dfs>7(BU~Cl*q2;2t*-hHKfG{3LEEkf9EoISmHRIW)_^G+*~S>R7FvcL zUxDdQhi0zFZ=L&f=hXVV*OP$ed9S-$&o_Lj2DeDmxx)@5gqctj23S+Oa@|rx|HK;f zta81u+3@cpJK1CSYIR>@c_)y=QR2lIGVl_ARKerjaN$tr-jRe2(mRs$IXm1}^Xx8L z{?Ea~B^e6*6AJK5 z=S|WN9@&|_LmRha19)9m#tw6~Q%X|&hhv*wr8n7QyI00`myB(d8r!D$u}x1hz_!5_ z(_g?)>p4l+jPbwd^f&H*{R|-AUm%|bQnes|If8ZWZG`+bf&8|w33)oIyU#h?zrFY> z18(bJh@@|bb#9Avu5nua2Gz50`FkQu_k&n=8>t>+rF1RzMLh?!3oL3xN!r5MSV|MV zV)&i`yFJ^4w7|4f|Iy%A#k-C9@)08P9t3XW42tCN*{+!J9GTXKVGlO6%A7ZvtXNiC zhN%!%uTmLOO!+YYG4kpI3Wgl^Z74z+FIa?nf|* ze7hNG@sdQQFG6hJt?0b3(PHKZ7S&61HFP*O3_8ai%gU~8rt`QfCg!L3k|`mJEcqSo$Oyg+Lz zx*Wt1xuKE zdwDJKT}az};YX7nx&QPzg+^az&UqOIz85}`%x^eq zmEUBXD)T022a$h6&gglai)>A8cW^842U;<_Ih6cB-vit{7`L8ge9QT6aIf~%7WnXm z@5jyVG5$6fp{3t~A}h{gA$4*38eA+N#qVDX3W5cPU(8~HN0wdr0rxGXxT{)InCTne z=<0fFayw#t?SbMJN6GDnv|9lD{=Oz=uVQv3Xl(nnkIV>{_GKaSQ3zn#fI}s3O~x^; z6d!*0c}f8eeNJkCT8^UN+y%}o*rl$57XM38-=enuEc_=2 zm{n=ELfHMOztvrbo_q^n8f-!qivyhxlA>gW`uZfl#1ipE<_c!O5JNpl<49vXJX9Dl zEMvex^v|HLL?E{ut=}_E$qTbmWlCcv=5<@yeuJrRaIEDt{7{T3l{1qWjIb8KWA?33 z@Sdlt1Hun(g%M3r+3FP?e^+xd-!LzcHOO4SPa;QwqsR|_DsiJ>4a*`zdtK+g)JClBvX(i5jR>9T;`%3 zvpNQ^?)D5lP?rv`59YC0{I!m=EEcKAS@ft;L7>8*Sw({;!JgTFKT^odh)qgIslHN4 zu3NC2p-Z7E9mK4*p+Zm#GAmm_+@E4(jDlLDa8=|fC_eGv$%Vyd^|<6av4$7|d`0H< zj>qnMqy#O4ePvW|43#D!)>&V{qtGP@RjiP^P^X4fj1K##(yL3gt&6lZqL6)?i= zS{P?`EmSQwu=#aOJ8Z9t2?Uq4(Y(*CSB#feqKCZZGcXfArOV8jNA-$1lFHE*Lv4Az zZ>^xrc~D2<^y%Q?QplDAHLd6B?M4L)16#|Rcfw|iD`7DkQk9uCPxo&$Dx@BUt8i-& z@@LfP{w4Lk^-}u7kn`+I$T*eF-ur+@Rh{|cGnoMf9la9_ z7&X>d(>4gT#AaI}Q4?fBumsQ=8(4zw)>^aLe$i$iw&b6afw^36j9XCJ(#r1IuDhiR zT8O~{W&$MvsV2Y|qoM>voH$VfS`xq}zt87A_f95&w(EDFZlC9u=gHiA&pr42dCxiT zzw@5=y)4p2QZv5S2t1`VZX9_p7H$FZ$1cl}2~c@auzzH=2f1ASnpkJh-&_GbfNROM zPzlV^>b^V*b7AYw%{QY}+O&w7;^1aOWZ(P2V@~G*vL&&Lkv~bN!kI*(d>4VWqZ+?{?u!NAf-4%- z@p9~<-~jYoFkr?Jk`H!aEu-WWuR5?>jGH#2s0mXt1*fU!?FBE?v1rT*ZQd@}B72{K zn$alQqNhBg?}SJVUDuMD+RC;Xv}XyBCE8uT5X4~6zY(wpJSUM`lku#&2{bU^HFE2R zv;?h|uvK2KX3oyqV={Bzmzk3?$$$nAa%9S*x_6SA)`lA*JLdZMvR->izb~xsGl6je zDB#v+>BZa-QE6T&NqS z$colh90QpJjp2ueU||s>15wcH=cp-$o;-*ega8Sk)d_grFUi zoeYyLvXt+X*`mF3&?V`h#cTz^#@ZD03nYwt&e87)BA?vqUxxx5v6;h(;hrHHL}EyN z*)aXyx;QcHB*Zp+T{V`L@n8UqKx(4u@XryaroWUpod!}mn>b-I*gC;Y_W>+6eQHXe zPr(0bU;v=EhyU{MXQpj5N%bhlGO)t;o! zY=?FVi}WkdPE9b1z@v-CAKIxJwkSbAb#Nc_Q=LQlsf`o-ZK9vTgsF!Jhw|GDVG*gN z>g#(Y=ae@4RNpH+w>Zrv8z|mL3lGtwxPHnT*F7far}h{_`l;o>W>7!o&kp>q`v6;3 z41(x2vLBb`$JK%dsTS22zc$0k!OO&S5@-hT#(c=B&_d-+ddGhUY3?zGBTZqZT!FShU@(|NOp^HCB^yC zM>hL!68%wMGM`z%{*%WS_TOfozbKmIr_7~Eb;u#&Yfn(_AiloDy971Yv3to&BXe%Z z&U}OV44JQEn#%k|)Dqo{%pi@opat^H-t$!OE2gP$8ZdjKA-jUxIJ5!Sj_ooZq7UB7qRzu((#elEI z=uTjZ);uo3Lae|IPP}HnsxR2gOE+GlQyXB*gb&QyU=}Fp2<`=ctVPkC?o&xv!l#lP zKK#1*$@JQtj$X*aqPDMo9jFfch03UxpGt~n1LuW3&+Cm!ynC5=K=uvFUv}ps9mxA- zC|C;1GmUv4=Ug6mrXbeaz}C9kSYMme*CzGlpQk=6Bd`kUv$CO7P+>21t=-=yF~dGb zQM9|5yO=wT%2XnD6T^ZjK;Gdih@ZggcV{>puUD>BZ=?3xWb5q=yhW}zN}FE)-r6@x zo1;rmG~`x#9=p!ptS#*({GiY&O4s39<)EGq4!ldx#|ViYya?HWQ!hO4B+*tJ!q*mp zur{|4q5~Fq!br7)Ra#~ZgiXm zZCulw-ljFmK9`y&i$0Kf@?Er=g#Xw7$SHiDDM|{YdbLM-)gH^TKB@TRPe3mO5Iyoq zF8~p&OamK6!yxPl2P@o;swLErA|R0;vkp6c>*8)?k-?Z$llxLqV2-imCAZ%HlRl{1 zAckPa>&*ClVCaKqJk?iF7#U{?Bb`R&My+wnsN2^%9n)iDb4u4GiXj_fZw6Z{^d*nO z`Mp0qr_f!!rb%Y~uOPh3d5R`(d0yjBQDiOjHN1s}kZ_)WTWZ~WP7m{Yzd%!*WfAk&7oxQd2IIQ zn4F7btQ+Pg5<)UmB2d^N8CO2@5*s`Gxiv2pINVX%%}!@Emu}}rSL1&&{%7O=F8nJ7 zTKxjQTflt*ZvfmpH-#`r652AJMv*Se)vl}6eu}-AW!NXhAr_xQ3pYqXIH-GFUW&Ht z5lQ!qT)f06OhxBii+>QTNV{k8_ktDa_bmQyup(pB;(rKMWI7lBeXwGpb8)dzn2T(q z7tah<8KTd?Y1(rh?YTS{2KSh^JF%&fwHKSYHvj#!v;0bU zLjK(#8b1Ea$%s>%b_o7o5gg|(mh3!T&~d7xABg#Ys~8xw2bl6+eP!XV(5#?83dDId z*nbOZ3_Kq6w_gYy`G_z|Lf>v&4IpZvG_2L2f6LX_wjaS1nDX4%jCG-fjsVHm`Zsux z2ndc~B5VzAbbOUBe@RiChmvGOP-1Y$G@+?BzY&k823+P0O~ z^AS$0m!mY?VZ_2IqiV%kZTzdtS6nQK#XVtf5*>qTAwL;Sf4fWO-e6Ia7Ggvl+cj8% zd}6~lJ#qfiyMlkeMRBZ&9iQLa7y*!=`y#G|S9Eyroio7AI}0*Bgbcv7a@-?_2pIrr zvR-)*F)IF)2$e?;6Dm;)DkX#p0xTpzrI%27fZzy;>+sAd;>&0POW)!y}vWrN5b?-b`}A=qir#Asj~b z?a&h3f8tLNS?}RdX*S9f z3iL1_*~&@xVE#a@r(Q-d zYuuR1tWyFh+M}||+QMokz^1HmrBB`z;|=x@P(sfH4vR|Gi`%F04fY1`W{)Zxt zmHnY}AF`^lnU4feVjN8AYct4{*ARdT>IbUJQ!!KjwC(;$vF=!2RJb&0M2kq zR&A@S!9&YePG({_IaZ;HFTdRd11A(ak{=?nfqBR6Zne;)D9l-)&W_Vggm4Px4@2ZBNOopUmU6-Zf}=n6s1W+)efV@ z>arBiP($Hb*-YDtXOKaU^Hu$H)I_Pnza)oz)@S;wE^KF>j^52CSYEx)Ua#@`p(ub2 zE#ke2lBm>&ZBx5AREqN%syit|6*E6G56kI|=X@7R0lQZ5FA2;5>4IH=A{GlEnZiaM zAM$znoOixFMENMm$4@fve0iyS#7{Ese0k}7#7{Ese0iCC#7}Zw=K1YYf<5UVJvwbR zeP-dGvi8#Uf7WhVeio&e5B@253XdmXu!RlYTZ7Fmn3BzI5nd*(5K%s{t$-7p&=S3* zJvsuTiI9Cc{x0p&Qyf?h2aJ3@*k;E`5onkyyPN}vHyY^CJGAvh2c4%}FbgS)qM1i%Dn{ISVc z(ueyWc5^vr@5BqFE%-e^;O~FK-ya+K`qN)Palsw%cCMDY)y?ztkNiFAiY)pOS~i27Ys1ZL z7z`i%?Pb1&l%uE>)%*T|J?lauTg-01jp`5cJG6`6&BYeZ{N1>QzbsuWVWZJTU&B~= zUeJzbK=Q7JzmwFVA|N((Fv=iUt2r zz(za>Ea>?Vv;}EGPWM62gBeaNxen|8mYg>OyWsvlEf9$>?6dL713K(Fi<&ID?_byI z-@)l_vHWp;K$}Y3uP*KCLcQXUyna+Yb*W2_x=6X(h~w#s#1TWRfjYi%nAp8QZ=?&< z6<|9{%>Ppa-$Mm%T?PMRE9`kbM-Ko;A?(gYfo25rxu|@UD)hH_Z$3kY8(S%+4m);u zuWy3Es`;!+++aS-M8s1kt*ODU;{|m;&6Wxi+XIj){bY&{^!F%qAbBbBK!Ba z)R_3LwFLi!iOMC&%pT*wfotcnAcqB4xX-lwz?XYw&CRbycoM?({V|x+M1H}X(-1uULACq0y|K~3)7oz}oNwBPXrp;I9!5JMvid(VYg}OMH?v*O zIzzi2c27DP^VXhXKN<&lHYz-6pd~LKDQxAN_+qE@*$Gz`&}VuKop5P&NALk=S;WmN z#G1Uo5jM(xUl*YfA^%$IB5vzevb`=oF;stt<(HCFe(Uzr^NY4u<+pBC{vZrV5pIlhjbau1(;$t@*?+kzvJa9^|+sq2S<|n*&Gm&5Y%l zPz<^~tQaVF?Cxr06bKE8MKrU5D|P ze!+e0(0sM|T`S&((zg(Hb0#hy6F$)VK91R)#2G+@@hdyYvs%WMtX_aZuWU0`WDzK| z!1vw^m6G-(c#9f>9Aus9z=x1M+@9ge#p#%nEs%o$f!_z(D3TqFd?z|u4!ZyW_}orX zN*I`Xj9XKU+tZ>WV13Oe(C`y)IakSWGsF2XqO8PyBQ%}vhJ zgAM=6YUgK=SEo)KiXECvL(9bTH6Sn^X&`g{O663vT?iwKCubke^7vm|*nc7?VYz{m z#|0y%%7dH~;KY)_Cl;m}bJC+9!q|{ALgvDNQPkxsYLb&y2VFcbg!5)?TK(sswz4Cy zC`F?^zf%l}!upWAtho*la!pOSf7e9BNi6EcrexR;s7*nH$`x>W7f1a^A$A%ycVL(h z=rcZl;3?B_Z64Gu(*!jLg~- z+p!`-S8=`tzylvOw@e!SFJcS?Dw$v}b#lA2eDu_gcWaNZ~&pHFWR{hI1;){FX|FH>IJ<|6oVrOeJ z+JdKU!7|xA6^T4b3B}BFDYYH%0%v|pdv027QhcAm?*GXaXZhc41C$*5j)i))RokIj zGRo_{*xF(@8_z5nUC{A6A+;|h4j|r`pKkCizK(Gqfa{;JRaXbgXn4w}>k?a8! z%673o<}^=9>__N;YVzU{Xl~4lp9F9a(t0w^{ZPVsq6I}8@VyAk#=7?|8a=(^gW7kb z?vHqnxR3%^btIgs{-npM!XI?wCvI9CKO5bT@SuNDvO2 zpEEn+IpM$J6?;C$?W=o?2Q!U)sk;EGur8>}fl{Md-RC)1wq@Rq-=!1r%VV8wSPYD+ zSCYmJFLKcks2ZLH8XFv=w=n*E>m`s&AD8^<+ijCr!sFR20cy@41Aw$H2N!-6@hSO$ z6HzFoW*bU@DsIr1Sde_Cir6+;3d&Ul)ovI3gI3h~kMdUG7wmSS0EuDWdP&hiyQA{CYRwjl|TYszDbpc}K8n@3uQ0|f1vK@R^+2h*s#7&sGgYRI{ zE+1EO#1&5Qbg$z(KI2HamGl!P756S56F+5MwwJUIdQH+kd=-0G-XlLxF^qb4kZIrH z^twG8bQ2FHRsl(>%vd2`{xpS}7tmCDy{h?E+p_{?+B|I? zj>HxpG&cMnoM(V?)Y$L?xoK|ouf`gIfpv}f47b3jQk~(3p2DbE%p5QRD&8WVD--mo zP}S#MEoU%y$jw?z0l8UY*&RUZ&r+$}ui-Ms;ZHd%tk52l^Dz52TDF^*1!mrb*yrqa zq9^1(ySS<94r5Yv`?TkJp)*+qNt)w>Z33;)?Gs(Xj^%D&*bl{MGjt4a>xq-2M+wJR zN}2dB$=cg@Tm^z};a-|-plAzV1|`HI0{ zm3y`4(vbI6;r}OKfj;Lh#4**{6U>d$R8iQa*<-G}ghqlnuV}MWHt0KYUa7hYgrAKr z>I|nPPeC|r@nAc;Xv+xZj$t>tcX{zXzD~))S|0?J1vaScx=>ru2UG;EMK-T!qk$c* zJTN#^I@SM9-aRevo+3x&UyGd=!@ov0RMsKiI&A)G_1~0yDEgV}xCO9BBby1SuLt zb>=glE5Qr`OJP1UsZj24njY#p`!xN3AanGZTN2b+oGbQuuwYMozp2xhiV@#$BpDC6 z!Ia+Lf3>S}|NXCCxIAr2xU?&D^5L=YO9m(!`tvZX#3s^gssFsa~a1`&T zaeJy>+~X|nE!!1FEv_Qiz4Wp^oclDMZNZm3ulLU^0^3@#A7HYo_Tcp6YeG5?1W(_x z?G}8Y@6%?#sXgbNi+w@tX5sF(ZJZMmAbgeX(Volx0Tk5Emt28^!P8C|^p2@zud&v$ zm)Rx+s&~G6|K1DlA7oFKr`!-O?#g3Bi#yGgNk8}rI?+g*!((FKA747!#d1oR$e5-Wj^!q<-GZ*HZtFj zo1%UTQRp4P!yg+fJPpVVHz2N=4G(b1~e3*|g zcCbujwqTmXt9i}TU*}_A6j3;@fD-~Y0xn{tm^W#$Kc8Yd=!1A zOxt>NYEH|N7~Q^$gVk$EWeex4XISd!g?HQcJ$m6i_IGaa-uoeD4gA+l(VFT(sh z{Y?7ynlppiDnwo0tKW&emM-I;Z~ZSWSMRN0>b1s~fq!pxRd#9XD?8P$*Nb>J&xLpE zi`t#1UXT@5iRG31L*RUsWjj#xJm(p0ed&HDvb(1``(X)p5JAxk(qk957AV7vf^?3G zxs=_aG0zVV!IpYy2F5_8uR)+nHC5d;kY%DPZ-TLpaA17jx-`?u*}9a>kxCW(~)x+}Eq?DaAfA8S5Wz`{&6=s)N`*?*KgwpqWz%Sj(K>kp3OO;7F4H82$c zdWavV_nNhN$P1GPvvz^pG@&fBaEV^D&a7FBQb2Lzwi7$pkOcW3nn1(9WIi)EvJGObZlZos^P5g}LN^Rg04 zJ7brC--wN&e&*ibWJlmQ_CyA9_EkZEZU@V2!m6qzItGFgr1MDkRl(!f-`}rapkM6t z@8BL+YkF`nFR(J`-;aaE&B2{OkIgEqtQPuv)D!&PmYU%AnrdMAAqV?5$e#Pvcmr}} z%Y&-DHvc`7NBXNWY0Z|CE%3%lahS{Ma5xMMg}H3Y7~b@l%MMQ9jSX+BXV`Nx3vV*> z(xr>Bi{kVFj@51r?X4JnZ!pJEeuA4sU{LEfplnw?2_l>oMCtMiwAVrt2vNbA$U0@} zLH=n?y9z0ltdp%`OqJ;isL`m-(-9DD8*v_du9%A+fFe0QST#sJ|9D}vY=45}d;Xut z3w^i;2Kt{kTD600OW?=$fW2QM14gBp7Mf=d%S>z6m3hzNSA#u>pKIhp8Pf|gt-n;B zLqnsgubLGlXZcU1X>s&RQ0rF1WNsz+!RD*|J(w`JfRW58$*w*G5e^nbzeN>Df!_tn zS6Uq*DDhj36(cDb8!JarFb+mW1^0px-wl5wz52@hJFs5yY7cX48QIPpEu(_3Ajd0L z>Ra+l)a#?_HL?A$*YnlukJW3+TEkx7jn|m2!TwY&6aY{-7jKMl&h`X%crDJU7eZe2 zonM1N#E#uGn;)v}@#5&5ke3D2sOH0!aDHZ_-xch?`}w<3pH>9_O`bDY8V_eXwa^ME z1cRHOLWSu2e^3R9t=G-z@*LXE=h~Hc&_ix~LSgDvJI`8`=R-W}FPqB*X@-2rW$?r; zB7K~S?&4IKo@qQobR09+4EVp~H5g&y+aH_i^!0T?L5lrm8C?KzMPO=fxc3x>%q zMqfCAZ{?PC-}dV8lHgI3rOt$jteL0o+(X5E_ynLDqR&-0>c`umH@m*VH+0Op+(G52 z7NV}$2=Tn2D>N|7ZB5n_TaJ&n^V1vjHE#AV>BQ!7fKYf(DIO+%hqMF_<% zuLkct;u92!gMu;Dn?#YHJ zL+#Dc1#w!VwOPqNo!#4LPZOf2Xe#jaUNV*qS!%9%*aA`wxAE8mTzv3lUMn}y@Z0X? zzx@F-mrt`$;l}sm8?#ncGV?`BFqDWfBm*q#&MTPVr(kw0WY-e?GH63=Bov?TWi{9C zAkh-KW-blRgg}VtU@pBI0wLRIHvWKV>cGttSOd|NuVRCB>FQ6gX z{`feCQB8D9bUX~pTX61r$bs=GYp&tQgnE%X(tnj6>cI{D!jLd2N~T*>&5e}!dLAM( zj{wscss+H0=Bhk?2*vMEjydqik0D0vD7J5~hBA;%vbd6la*i9%H;E+c6j~Q2P?Gtx z5GY9K2V<8j0%iS@K6Tsl$qe1iRs;3JgC+2jN$RMO_%(EHkwAdr1V=UI(+JKzge(M- zWa?8WkDQ3hBWgC=BFPIl9yCNk5=h2Q5(HV9pF}dsnd8rrjL#w05R}(u63Seiu8@qD z+#AA_T@so`NXWe*lfV_4BPpB^hOjo5gzk_O@-Pye9$YL5WWtcYr%*th+s&$M^k541 zCyMyqmjy-CU4e!fG7$^ad<2bpbS;oyw}kw$X_SKXpQBME9EmhaFqlQ7h{O`d-=bH{ zqHiT?QM4;Qzb$;YLeZ-gLa&BVDma5X19=nk%91yyK;A42ZXd{LfxP*17O9tZsX27$ zt@!v3qd62fx2NlpnN%jA2YBv2O8LSYTxu;dl z;aV1~Kf`h#8lBa=jlxxIGNeCa6Y;CjcfCKYJwr6No952etZ+ImH!H+meSQARIX zYi#8ra`qXUxO9?t8b4?EOoP%+^m!s0+0p7xK5l$7T|W>RxXRg*{1P^2v5I8l=D^tC z&M(u+o>upBl6md>vUG7383AEF+l;Mj7y@Z7dklLvOo1`R6aOOj^ASKa6V4UJA~r|~ zuHQF__Hq3su|D!50O&t<-K)(6*?656Qwz4!Kq4c0)kG&;SCRX{ z_PMY>%#$T~<~2iS0X?Ohv?X;CLJZ1`;GPNl&$fPKB6h|tibb1Ek1+|#cB8_5|H-Re z3w`&uV2cKuBJN2TAy4FktAc$_j2(9*qtB0#gM=6G9Ogu+#07nO5zH%k%sQvz5zu(3 zWv{aNCmPy+4W+`$+O^m>=sya3SG_U{0|wucuXg8yzRDJm2Pe_ApF_UCm<%Mhc`!97 zq@%_{Rpa*VOPCvq6uO1%B8M}>!%cCmah6lqPRXvf_8rpcsjmjoYPSZ-gC5GJ^@pI3 zr2atW+#i!g_^d0%+SVEilGsgZ!0EPARSo_d5dVYZ!=Y|ylNR~ldQoe<8H#+f{H6=L z%YZ}it%My5!Xx_G-#(_kEkYi*DnDtc1yEK9KDOF%ft0mq1cWoR!!5g{$3^m0An+q! z_uE(mC~TxE?1FPDOjm`4!kD639 z1;Ixz%c6{lJdWr>WI{Vfvz>|QB`mh}k1(V#8^4YD^gCwnZoyA*@blFLTH^wbn41nS z?epiBhWZ`R3#7F7q_mf7QJM#-vBmLH1i*2*_n?Nl2dAQ07gS%%hAAM$+q{METi=k< z?q%D2EN%SooKo*UOU|v5^M2+eHfhirW%xpe&Y24Ti2MZ|XF{(BUbki&SD*v?GiLe7 zanQvHJFcd~$xF}*Y-%F19+AkL?reQ?g8pc(E(nrEVr$}Y(czq?4(G9(tEj^% zfDWfB+gwz#Q$#h#3s@2G&mH@cLL1Y88*(bLt0sy;g3{bHp{3v#R>}t_<=0t$z|!Dc zfz5R*4QJ3`+DPOA)%QfGlk(j_P?F!6k*kZuuC0es+zv7jY)(Oh0WR#vsFyM}KfoE( znqo;&n;E4`-zp?n=PO-gq~IW}3b4Fa{@(KkMWM>S3{#Zxco9g}k9VA^9cTlDw%x;_ z^6AGTr;@Cc>ye_(J`Qu3OCXd9pv<4#1-Nu~;!RMhN|N<+>UV@o>??{t;bgX?eB=WL z<4%!u496y3g+Ddw*yu#!mMMa+m$Y@S#uLw%DC!6tXTr)~Nd^g@i}62 zN|A(Aj^?5c-H&czat!U4+`1D9*pLz~K~yhsX`UEs!eJ^S;)*$?wj22+3OJjN`qE~-9PK?=-W-n~*OOCwz_C18a+o1@r-YYsBOjS?^g`yqr;GDDbw znlrFTX(lBQ$qAbfK+kb$NVuoZA`M+ht~Jd9jCJ8YLg1Zq<)Kv~53Le;Nc<+Ki4)C* zz6 zhd(0jYEK<-MUJ=>!{vM>c~c5rI{PmXPFkt4U<6>ygGWYc5nT_ZzzQE0D9;n|k3ana zejQhA#iCtz;WrbpzZ{ zxMalucNBE%q7sd|v2>k-Qv}$@a;+G94<3?t>Ki3hSIB&Tib1S!TS%&mScc}tjaS@wo#r0^1JOzLE5h>9cn!IkIATbKx+Aa6k* zXb5(ryp=d#RwHVWHDAsvb`krC*!4*8H*6ThE|I=O>|%37?3zkID(x6dBjzVNc=T0d%xR1!IzMY)wN<7eAz&*2g{)W#z;rZ1!Ot)`OB3{e zY+r)@FAa~aGHxu3`agcFR)gsO*g-?lEb9N*QR@HroznlYK*Q%6r!;M%`C}%NnmEuNgTZn1{w5QouK;rg!BI}fAR#Y;OXL8 z1hzOcq+d2hI{QIQ-8}va>hc>f48c~uBv278^Ch_ z>@AHfsfXp@XCA&Sp<|uS5lb#Yb_jG0y90>$I~_?$OYY}y`6c*u1>nR{Uhn1WOnI0a zehm*eh{uy?HAm#WBofQ9a=wcMb-TI+JUm+Z8uGpBJUJl%!)y7d1=T~Uyekr;zlpdg z7xxeBrE^??@!!Ll%84kWB_gH^Hmzr&sYbmN3+rt>1Rs|N-;aNxu0Q*gy8hdLsq3#B z)%CaAaD_lRF>yT6E}p8}6T28DC?oOohnO3`FPYPL5U}KB2*h9r5lI2wqxF6FHt4UJ zxxSo%sxKN#9{bpw=bV!JSb5C6752jT?Al#RHlvtdqX2?;cWiS`9}ZaJ^W0iv$rB&P z;8W4ZHkY*8a|`q7TX)v>)W8e_@0PnS<24y!hN+FkU8n|kgoQm{yvtnPr3m=78tHjA zrUGvx{#d;O-_i5#^Qj=Rv5SO_+jpe4g^#AmywQIJ1j)j&_y#GS>)$L)>NusXUlDp* z?BB1&Yu_rqMk8@-FInz!3MM7+e=&?9whJJ^fxi;;P!)uOASPS6Xf)nLx}g}6t#1pz zuUK|B`sP}(l$UtBsZR;KrCRnpAEGWa4|Pk^KBaWnb)ocx^^5W$0)2#JIn`&0u! z#^>WwpPMV;TFk+c-7^1hLeE#swNu>1ADs6qDF$9D!GCgblt_f<$!vHpU5GlY?^^`E z@$XrreAN2}oPgtSK90=B<01Yx;BovEA$k@(4qA!B;L&O&4ui+DR^l*t{2YmYgYZZJ zdBhZfGfdzai)M2UL|=jbacr@1X{)VqDjA{?mC6N~kos$t%4wRAx=N*TajDd`m<7>l zq_!^gpf>)sE+t;%AJ0MXAYOd_+w?e1(PNlpF24XK{pH`S+ogqS@Wp2Q4_CV`G~5j!*e8v(=N?K54!9n=8vb_oAP2nRzHl?I{!?b!&F1Vu zj9*00aSoaJ;S#v`YbSy0RcAVODExGzut?o4`rA2w|rAwR9=8VC8 z?*@-Joh>}1soeFpTTKCAyBC6$H5REGjFh%m7HCMY; z>REGjA5vSF#pmj>_*^BsIf3kE!h9X#H$7-Y^hVH)zlh&V+w5bf{GPsUZn6g3$gZMm z9?(NawBR(BkH1&k)HZh?LlX46W}#PyLRbZ= z7_Ra4R8Z^hp}#&Fv*BZy_PU<|0|QOBk&7Fz{-~e;fMNJs;w#8(MloQ~#Q}e? zGSv|nEt*QbC59tcso{t`?SnCi*SsSMD+u_(oHlZB9}f6n^`tPqRxskhag|{Iu zy%a3@3(UN?BmM3?-5-V*!BoDe!#)mASol*+cMYuMbbp<4PvFLiiROT_p+4@vsEjO1 zwRkgDcE>o>suy>%aa#S)@LmqO_~?>Pt6z>n;iBKj^H~1GqVQPU3gt*5|0*5P`}g(h zC-$9&SH4as#<$&Y<6w)=xD4AOX3B+}Fq~}d5S@^sJvZ&bB-1+?$3LbNc`DuTD|v~t z)#fk#p7E^(Ijxl^;r+7R#Ul#ZQ#q5We`f^3@MN+<4}_J|XuWp?^U!Cq zzpf7fY?ffUP&C`4`*Aj9MK{j?So{;bTzBGy*eTb+amuU+#;Se`G9Z>^1g_^-@nZy} znzg$R(G6G9L%M%0*$vWu_=H=7*AS9db8=X|<6;-0@H#xBkO7!3mo@);KBZT&M}wnv z)Q9sz@ZSy3Num^X-;!Gvv$cx2pSj|rT2By<1xg^%BSg~ zk%vM%jkE^i$AbHEo8TZ95P)BpBFb)plW;XG`2tQS9_M@L3*3*o+=lM1$N78_Cf-N3 zBJ@r8d$}oULQmnw?$7au`LJdr@50=0Q>Wk?=f^C5j`D?YaTG3!qr%x?SCU_qL=rgP zB5-uq;Q-09AmA#6DR`3K1=ew`2=byUu_DjrcM}-X-@^WdT_MLvQ6*j=jA>AyJw7ZC zn2P0*1Sl~gp*$oi_VwGJRNfJc^6>J2%~&4E1j@q&y`;R5!1szyeADuohw3@pL~}(%5WEN{Gt`K_wrEn2^vv;A7RlV6TD~ z>mt1B)l`|!DFEOBl*+$qR9jjNqGeRB(*ty>AqS@Y@G{b=7q3AO4!szj={F(>!A8VQ z&_W-B!4FohaXjqS2V!M(uDb|SWeuX;S+0K-H|dcz{o+N?8w6HQ39JnyxB45b^#ez+ zl^bGT=C{zS<2=C~;g5~d)q2Wml+`+|{$u7F%I;qaEM=57+@hB@Oew9Y96RV=VU(_z zQW~zrvGom3?NJZfq)-y!{f}S$q z<;c6uYL1T}=#2gypl42p$AGTjP0ng~?8N|_O!Tv2&o>zzR)ZDm#X*X6!EQelKt?}+ z8(7@QRE5I`cnd0xz|cHBC$+j2Q9JL|vn!;9*usX-^GC_n;VmqTwECa2!6&hvQKF4c zZO+Fc(G$GqBhh2eNhOIMyzuP2B+=bNscTVR^i@2ck3<76r{_%49;H7Q3#8Q-Y$Jl~ zJ_G>=j)r?}cz{?4qKBvP3> zY~~7cu6dpp_{7N!^t?a^vNk=#d#qu;$Hl-Cy2mG6_>}N%0EZ)=%0cYy+wpn#xA8;8 zA{hzcF;pNQGkgV317PFKYlioKQSQJ-k7AnQ$L>Hkqt9P}xg?XvT-wE4Vu>jE!Ht@Y z+nJ^;5g%s$<;XwWp8&-zoF6%#1M1cSU_P{d8P9d;1rv>B>*OZeShhiKCY#es^nyvo zbePXf&(xPrL>0!e9e8KV&Ws!$L0bjYT6Z-Hir&rE%D3_!KJyj7aC$U$dBMbPsI5-g zP|dT?kL_V0o7?&Oll}M&-!d4UJ{X=lXw>pmYo50jf30~Qb#cqZ!C#}6U$y29OJWhj zl3JH;VBhf9y0l5%;BI65t~q|UC4ScyzuOVNYmeXUiQjd`@Ak*16 zZ~U$&e%Bwr`zU@#y$kyd5LAOL%(;Z#UGS3O~dM7mw_)L=c0lBbo{(}nW1+IrIDiOYrGCCk%V>**4Cddhkl zD^E}3De~^65L@+zb-0h8kF@(c=Yhx(ud#4pD497$y=`w=_Oz%g-l&5smVyK zk@j_s9o?=wrD-f&&c`hGdz-tG=T(bV8+A55)$@Cz{ufmknvN7wl{QF+AU+>L=d>_ZIi!qV8+ z4f!T=#Jzm}^}cXPsd~mka=2tc{9#PE!1>4?LIztTTMIZkw{ zXxw&>@!)+%Q`tj6soBrrWZm-lH%$u9`xuw3@Vr0aa(#H-04`q*&l@!6-WPn!6+GiA zABU7{!k6RslJGnyF0Syrq}Zj)=edzMZv@lkjYQJ&d85MfT*htpP1SF^4+B{~PHU|5 zePKSd71Nx#dj35k({f8p$;H&~TGJ_;exVWaXq=v7RAjnlPYSj`rQ{2|XXH(+N&lGI zVAzM)`jlKX1&!q35A$GkSOVN+_~81;Scp^c2Qe)W5|{odAM_Xxdl`|+CobKz+3-pU z*S7~T>&Ex#m7T#spEm0ioP@@CyF8p1>M`hLevgr#PDe=jDexBnKS=)eSP7kvq|y0E zp0AH0apwoyzzz*+vjd%d-2Yf#c@PJ7Bk#DKtp>as*z#3w1}&sW(cmk@Re3bJ)CH=w z-8TzHfjEnphk9_+o5w)by)fRBn8l6AE}ZJ=y2A_hUIhnjV4ldWME!l3hcZd_!R(3aT^=TQfOCoY6Wzi5Z2V7l8_84krjXOV75^s>{kBd&|Zr};`+}to+Z4D=Y>i7X#$f} zFlao&SD(ftJ#sFS^vJnPQtbw`mVX@3Fxk5qx?C7zf_6heIIJU$BB1JOwu9!MH=S69IB#uW^_E31)irArBr5MPr&rL z=u4<^nhT1hE?I@#OIKlUM#vO7xa z?BGrxF^Rt?56#YL4IHqoeTT0vdw!#TF!Phi>?SqC_+=W1l89AW~DheZcX zZzOsLz8(6IwbVlYhHvn(k`&Zu#8Ex`;2L}|1d?gCJ`3=GKU)F=qm~bk7jC$_({J<1 zO}c(tiqWu<)AzPiqoGM|(u{^Ja+7W}G|Nqf(a_18$1+%d%>!(C?IhLy=-*@iFt{V` zX4Zzk7qbDD41Qs1GK~k_!K%9*yks_WsZ!qEWm3+rEn_Xy`}4A-#!kaHhAC28wV z>#F(m5OP$hHKow@}m4=FGiD#+-*jVllk(dt9E zgZ*!PC98`=M_;$4wAj(xpJO3(7oQ zjaxxB7$v=6a`$4SS<3?J4afv5`%0*p%C%tAT6}DILMYuHY~t`cVjnQ_ip{?ue=Acd z*{cf?o`V@=y(s<$MQS`7H{B@o8gnvWFFnd)T7kLqp&pA}Eo&hbQ|yn`o|+p51Mf_o zp3`6bNBy-Kh<3d@YtT%)KK8y*m>t?xz6FMQ+rTvr#;#Rg|0ce?>(~fKZSH2g9awaD zdd`{Z6Gp{k)4RDK=R{S|DDh+s#@@B@*)&GotA<6(2hH77K`RcQj-g0Do50ZO^lXxX z-39*^&@^7*`1FHjxXXZg5gP&yPts}i zU@Ae)qhKlFvd6^;Ghjp8ooy@^OR#wgYuTdB_BS&HzCF5F3mkR9*bD}VtV`fe*NiRw$E5X(u_7d1^=ph&E#)d+#b9Wy+x%J}v zDeyg2d{CR+(YF`&Y4}d(cku9(Q`}RDXtKR}D}7q$VOJ&dMXm8Flmsocn0?_|`s(yq zfw%d}<&Vw?ya;1A#OOd%LEDe!_@P5BiD;pG)gf`?-h}8003F_M%<-pap-os>3~U;- z!oh@}(rFaL7+?>;vy0_+tGv`d|$(m!% zoHo2aPPMT+B1%Hha+`Y&0!~2R??(hS%a{E@VC;ov5BuV7$qiP$Q0DhO-YH7 z*b3@`uf`Y`%fSMw|F9c(Bg6z13hxTs={M;M5IBrS(57&pDm}(X7l=}+xL&ugOLR1H zIv2PtDyE!_3|qfyebx5hP`2e?#1t!1i#3wdpV-xQI95!h`WiiVM58}e8>n~U8*^(R zYPSMbFn9Eyo>4uSjJH^j-1jVI)Qi>-ty7WcXq8~>ywk<3T{rJQ8D{+F(cN(m+Rn8)-JDU0PPCx?zj-cTVI{ypQ7cZ)Uu| zCGGmmE z?fP$zw>8d`JY~FHxLWJmi4#-*BkMc0{?o?$r!X%gW%}>qa}9fo|C8grP+D@_n_eW2QLQV2}pwMe-l;a^zsX+!?+ z|M6)~>&b#3x{3=)seYPRL29xDn5?(1SIcvz%-ir@;GH(B7hP)1Yk%m9*yd*qr zh=l(c{_8Iqzwa#nwDEiA-#_d4-G!rCpKbiUdEW8cDlIu{{N~5v<98cw|7ON-2P}~P zO5^v-@TZO6mwxqG$L~pK13%mN1JMr=B!0q46_)U{`eYWvi2L{Q~35C`{ zLJU@V9OWY^A5)Ljy7}*znXtJl}?i zzXQ9Ve5_HAo8)y03|Q6kFL@3FQ942u>UovCPlX+>dJf5ZJTH`It?oexhSX$fb>GDu zb334m((2~&32lON$XV8lJa;6TgfPl_i2E39hm|lz61314Sk_j)bd+C?q7c*>RzGEG`ssaiL6)%Vc%QRF_nB@u*8b z>NNyzW}Xw9xpH9G5a1#~4?Vy}@9Y?WIxUI)oRcQ7NYhqSfu}LH65svma zC%?%tfttfGIatX57~MoFc(O_s7r+s(51L~)vFgGMV@@V(ugK81vT@kD{lsoa25Kg9 ztwzWP0xtL?VvpgVp&6v!WY0d-7Qi9HJlNZ+NPvrdhD>6-ubB;Z)UoT0t(?^G{Il%2 z8^!Vw8iOm2I^g}MSJHhUb)CEHX5^=44yqUQ0uDXo2sdim$xf-7eFCDtpw>-RtxJb$ z{pDM%HEPwWu5*_TuQd;TJ$wQ{)M3>*4+hAe*t_%8bEDMLW!0mu=hPz`YYV+_8UlwK z?4eJl&1dV`i$~bAPOC89W$e3)t|uXS(-i#4C% z2v&L^xI+r2E)50SaQ==oF~h=7Y;LAqo7c!kdIP&L11lRi3U9q;X&6vQMU5%wyVPSS z6bxu61Sj24twC+CLYB%pX_hvrMGIwo%?nW8!2m+C@Oio{O11p>Y%M1#md|SWBrE)& z4qjUOBtW0ez&v7-BVhU8_<0*zi!VeoimS{O7@N19gEAhn&ZFbxNB<#C>}Kmrb)72^ zj}@}y`wW)cWWDFrUaE`!6Z6n&B^{1EEhTNRa;ocGY4s4wac{u!x@u~nMK$}4Fvg;F z5-e3lXd%X=6J2!e4iaopZ^k!-YA8-B{baCbCNOOz>LVG~>SjV{#e~orVIzRJ+<(Ak zDxI;=kjO)8>(C%3wcb|Nc1E%bGK; zg{`l@x2(m{;&hB~IFgbk$i{zJB;!8pCi;6K{bR5{E7QiqGe`8oUm2x7cTozQEIGt| z-Scd$R)`S5(Xyh0lV;FtA4QGdT~^f9Ug31`<|u1$c0^8%!FI3;z_=(mYge%HsEXgM z6{0_|TJoICce}N^dr22(Wavfh*lnmQ;S;Q59)^a${u_9(0!nmG1K@_vS0ThG_Mxyn zBxWPcas%_JJ=m<`85QhC*(X1g*om_%TH_u0aB}9&cXn{swK03D^Chiu=2WNiI07@^ zIZ0c8`~{xC9RD)T%B?SrIzKFX-HB==u`%H^ysboF8;pZwbPklgB=5S%guO|5IsTr& z&lK#ibM>^dd;#__;W(}kka8!6E zp+Y2Mq!GPa<#4u^wMvE2F=032fy0lLawg{Ap>*PI4psDuHvm6>TTX#jtM_tx95?b| z|4Hx~McDPjE*h+Zd|dgZ*m`D|3N+62Ud;H0-@tx-Td29}TY#hvX9GfK^3t^R+np_R zBQa!;fUaeUqlohK7g+E3R)7bA=F_g%)_0;C+f`G2VfXd0!UulwXYJ}25#>hg9tfu&>5+Xpm`83I;9!eSOTs7{Yb(V zA-iKOL%c-TLQFaCfLWnT68p;&h};(KHN3Tq`;kg!4|Ys@%NHVy8@?$oms7dp+x49| z1BO`wZw9BGePw+D2&_Q@=qRivVm__$b#47?0MZ%0s|EKz=osCH(Z(eFgSLLRGg1~& z;PZR|M+h9F`!7NT64b2-;ZGT03+=!@n)@-?C56vGkM`(1z!ZC_*s6qe1%`Msc0sblke3Yy#lX;JM35laeOmTVVX{Yjl-0IZC+|UX@kZDoZ*0+z>sV39_7T<1^WvC zKt1D%=RFd5X%)T*p7LlbR^SHCTF_)%)CQ0r8lw107O-0(AMBxMP{S;yj|Ukn2BCP` zWPYSc6eG-%;)BlJ2$+aqRnC{O;S1ZNCUj{qc8yh3H#U+urgf~!Q3H2U$MS)FJxe~) zU&V2yQPmgVNFY4)q+J&4hE=DdJd<_ir(z~I&?GY-Ya#{c;W6MnT>63GEFU?McU;Ko zdf2zwqpHBPfgXUUcxU98$GH>EHM@MyUVW54ou;2N0*50HXVSk!+!7OS^4(QiAcNa4M{(P9gPQjM_ z3hqzCk_*oVrxYQKC|8JWoi%K}+w>+)?0w2d8I@`97($V;kRxB}104cXVBizD3cIp! z5C(Z|af<$G@Gz|iG(QY=yx<0z2eu~_J43Hmv{1sU+QL($RgE%5aSqivrNC4DG&I7d z+cl-YTmAE#f$}9_WJn~rfwvBziO%c9>{zx2xBP3Jo}n(O>XM=^%1mc^g?cJimvnVW zQy1*~@$)5eS+%(|vkpN57cn zwRfCy?smZ{?^`Kw5SY&Q_$n12=+o1Tf^>a4j)EbAYWWy#{enzaX)lg&PR}qFW$KGF zh1}ccg7JDXUPsxl+r(IRPa9WPb@5|3A>Iy&?(d)t(`g^D56t50E4vOH?>fXj$G5o7( zUA+b&ZLh<5ST)$IpN5*@8t^+}SO&fT*zM7F5JqcpcfT(T2l$>8GsOwy1`{kZJBjfE zaWXo0Bpjd_l|C~qM=#xCrrn^IHkoNR>7@v*JK4-0sRuTgDL6H|&e?_|)291o#2`XN zdW1(yidM2YdwAd%#G}1?8fvxi6BBXxYzRIGQ;C>W2-Vl)jI>G0lE_L6=p2t32FMXfv%x+wl-Tf&!5$(Jd2;&esv{<7VpUxWLVh;V^4 zsqvr}@X!e!`?G+wTLRD!qXw}yagk9PjPMK0x+?l-qoNDQQeqOs>ILCcu2WE}|1Fv5`|z((AwD7)szaZN{5G|3$rsDd_S)4gA)d1AG_yy>I|~1PiSM$K1xx{XVP+ z%n=wIVbY}_kTK>x+@*T6oE>EyV^#rXFtbJc%*I?eI8C|UdAjWMn2mr(tH7i3Agne( z6>b5bzv|psw$pJKeTDtw7^5=PxC^AHv>l6CxF4fB1+JjbRAu8RtdKUN74cfb?yJfo z_iaIMck_D%>+zAYovVS|#>3C@7{wWLndh;yyTtZJ95`z;c89%Op)${Vz|(@Nx99lR zXmu07`2;KXIJ8Hf$DPd^BP=Xv{~B}~b|;t%fX@!27^Z{CJR8BOg_LG_1Q+Nr-T4fo z<@RBAn(i^M@xpY3*qz7^6@%~OoB-dNJ<@pqhb_tu5OhXh2U83(d%2@Piz<7{`UHAA zWjGHQ#o%eVCJ@KEXWD=~I<-)Sa7kT63Ku&$S1h0bi5B^s5!ix}X)kN1w50IT ztg-#}J)b$|97b#)G-CSCg6(-mG2m&pV7FeC~RZEYbKhDa&3Gk z$Q%aHK;{|CQxnknF~h%BrukZ;^YTaVn6)d`ZrkhZ;ew_~vQ~G5w^i9-Q^qPwblD`1 ze%`=wURn1r0RvxQnuQo+)qllZeEc%8y%5%OOp%mL7D{&D1eE^snVcRV&bb*@F$fS8 z>7rX~geIehYd3io&>Dw1JIVZ(GditbC?Y-E(JTd1%F$gWg=8yt4=l}JW7*%rXO(Il zP21GDTgCsNg#vcvM39{p>UuVRP}}n{TMFes;3C>e@k!ZAL3~j*u;pWd6+TBf6yYh{ z2&jO&5eQNqkkdT(({7ldQ&P%s1jbl11k}$FeN%_=>;_nFgO9MM4m%lpn{wvTwYa4g z>}POC)GAL%fW@?8s|tjzY8}bG%K&VW0Z8cHkNBN34*g%SHlscNl^wFJF&=C?dsw>` zZ8gL!O&64)=fmc>22r#)b@C_2CJn)X-HL7vtDUW7f@mQYW$UJ(lDx_4Bg#q(eMSX* zH0N>nOH$!=l{bYR-OT3A9Iw8L8w+q;B1K-?IxwiW=&LgMQnFwbLBY>ramUElDwq&; zh}&&?abUt$w5!(g0iGiR(~*0PHkEnd_QY)gnOrWS-ky zK3Y}fsJ8Is|M{4;bEF+r2m+)_M~2ofTYlSQZT%`X-E~_wPQ5~f?t0LIT7z-J@A&D} zhqT7eMczuqp}NZpa4>R4;8;*fa_8kpkIEm5Z5*;+N4#KgLW0>!z}f;|TPE?QcPbP< z>QIWAeXA4PX4JV0>NtvMIBH~0bux7HLG}w8g`zHV22M~hcq;rb8@G9QCTWHj%tPSI z(3KH9pnJG@Az=uRa6*d;avXU`$qiwWo}@KaI7I|j@&pbQLk_M5 z=K=LdWv_7;ApDy1MWZ@f&wdgH+@SeAVC4N>E?UcXfx_%Be;kjXF#m-;QumTCvGS^* zXqD<8#t1+Y=qx_!EVgC;ti9dJ{}BTIzWb(7I?%iq)g5SFAMX^+`#ou1;V#m=JkTsE z3P(ncrAn}b+)+FtX-hiJ0eH^P8kdZ+`_gMHuv)$-ThIN4-SX$5 zw0&tngJ-tVn)676Xp`-Jbszf})DP%5M_ssxvz zCO!>yLxS0$Mo@wCL}eYA05W7L6Ve&AXLs<3(kJYO6MMp6X%*y?pe$*J7XC7d4sPXZ zJf!o16RUol+|gx~mvt8*T%KSvoEa$cV4GWe^dnF=iYC$&o+V&9lwk*v4m@xkUZEW_ z!2cepqHaPQ7YiW8I^5=FqVslh`Dk_N?31PcKLbjlI*rIJ-B&rOwO0sUdYq7$2H;UK zW6>#`a2A})bIGA}!hLHAe?#}+7vU@MTYa&yiEnhlys?=Ih&&Y{PhjM8#pEs zC=3GN>Tzvl39d~iV)FL>Kx85Pc9$_Yj$KZ4%NZ6f*km@7bi+gVIa| z6G&lpKbSL&92LH<@`+aShOI4i6&;UHrl2Q?XQWx+cJhg~}%aygpB~u`?K5E{=K$m1z`nWQvtP^U!IWx7lW8o!d2mdn26iUQ6(rJ~5(vP6nWayoW@t+?;7%sG_!lT#uy8sV zu9jxZkin{H0Qx!ps*sIaYvWJJJjdW+yXqwuJSJl4N1yx`8Bk|ybOiA3luFN%_Szk6 z`Pu7fNFLSd9>;tXvae7&PGO^bvXZNaQpimzBzd{sL0yZniO3#1C()~%y&e6|wx9G3 zDBgiwY~UI_f{uC#_TF`h6~ zgfnLhS$|F##3g2m@V#kh8JZ^L$xugqSUFrV3{;`2NjFx_X9ZhHQxmFLVpn6)f055n zqq)f0F)*w`nF{8^PIxkqeIr$?)CcePaCRUy>90k9{IOMes#Q73I;o%$x|?lQ8bI@` zhHzyGTf_d!+E8i%09cV}q+2^y3H?QN8LUoD&=FNrp5m_Mtr^DcnZ_p4dV~gHwY01u zP=%1=E)l4xM1-lcf!h6uK$gJQo@x{Alj;5g(rk%C#{U1~?QP(rDz5(VU3MW0uHKDA zjW$B8)Phi(Xl#i=-9R=3O?a_HQ9)=Q<)@FfMcq}jdD(cgbT2m-Vwfo6gFAc7(aDhiL@usm&iDGA_1e&6qzyPE`Gp4$HlAF_Au+%q$0&YU@O=FH5Q zUFf1L+XdO@G%@=f<&>ib)J9Pt_XGig|Wb%9q zwxjXZz?<5zw`kFM@c7GpXyjoGw@-;9j^)^)HZ2b~Dm?a8^%;&ZZ+z@x31?TY)*qPa z3PT}-|Cfv7Gl$UW%Pos8#aC=nT66`T_YGmz;}J>~AoSQZ>f6gIo_VHnasGJGbqFEn zMK{TF#v)Z(HpDVL%Z#u~u_p57EO?!VyT?=+^ZcI5X)ANOalyYcC-|nB(T2YT_ed^* zMGwleHTqV*7{CNEog@5N!^EPOzcK}q17znAvn3^zAEkt<*qAj z!3{nT{>M2KE1@mOLGXiXPKD%B$$l%6E^v~D@N(mVhXjo=ZMc)2J|a%jyX&8=2Ltg0 zI+mcfOemSPyrz+Kj}sRo&THEA+U1`5i)As~tX@89=N-FPECxzz@fCy;Ex{Plu!+$X zk$)iho$)zHIK*n;oz~B#mY;FB>#)@{L~gj|C2NUegJ|o2%AAk&#g`h6`O$akvz|p? z?nzzn-0)axnz6O(FmBEP=<$K>O%2C3An#`f5!K4=4Lw{Ft;u=;o7M^c&VxCBgcpl6 zya(_-^N`~UnpEvL5K2aG1w#CnjNYCJ-Q|Rg_45!i;$i$g>q6e1I6VWK)lZoZ=EK}! zMx~ysl8NptTnq<4y>RWhjpV!f*{hMKHko@RjD<4YecTH)=~rVfhL41Ot{cy+=Ox$2 zUHJ5~t`o>Wd-w%};ff1}k!Bx)W^*o@R9p3$+!w@jxHm|pL*AapbMRFqt^XF1&GH$K z=1GF*#}IeA2Vo*SvtE$Go*#*LxK|;z*)Ztj0^8>lwmVZV^m(Dm^V0%mG6gEhQ~CoV zVZ_>`t=(nZARCvaUVXAQQI6jO8kV5GZ)TW_(}Zj==)E!rEnA53H^P~!kMjy+71qk9-QMl5y#g_6%nld zz>4KFDsu1G#!{^fK4N9f^nIM3zo~79)CdGgACPQFGKdA03L~_c>N11 zyVta}i_d0u?p+WKbB&)yNl?;_{pK^^=bDSJf9Na}FVGLAq1m^3p(8Iu@IjlB$z4I` zvufb;hu8-*!pT8;(_FK$JcIN@Uj;1ccL;y);m^k3Vf-Dz-{0`piN6o=_c8vC;;$Qj z$MN?G{!S)CD^a}5TJ$T3!enT5fXHC}psmHFMO(CWW%Ccftw%ES6rt8*eGq-L3)|yJ zQSXD=+ND=*LPGHhH)?O<;NZE&%m=aT7h12k)hBG8u3Q;SfCzp^;oDL)c65HcWihxtH)2&W3hTXrXEYw<8k#M zMM>S5 zu22tbf+h&|KD+eLN?*FIg$C*Qa&P^~d8mKkE@|y_TQ@!!L_910?x!j~hhO?tJSwoC zs`zq5OT|}9#mz+RO0S7iFsrZ?AecCoWh{J!5RkbEU*Z@pL)~VLn`At<6OnpowGTT! z5ZodsD7kvhij>~WktdG3_`rQq1$P%!@63QcHHkMrA-N%dlPlL>jbbzNn z;C11BS86c)w0RyA-+7#lKCAqh7%iR9K2%yGwjW`0TCUM@NCG2_ zmLm+nH_77W|DYr779M7S!$6}&))(MPc5qt<#-eTdJ08P&1s|=|gZ;Qsp~sAV0|gr~ zo=VA>mncEd!h@`)D?dg&aKsWC%d(n$F0_;<#{4}omMXI-&{c8(UE965g1(`LV3F24 zVk}FBEOEtxTeK@UkjI!=gB=l*#ttG6w8NFOeAzc+0nA{SI?NzL<)pWU2 zb8o-OD))S-8_d2;i3)G_;cC!^lTzUgMt2`?C#TRe-JX8zTvL~}rrVRZJ<38~OYA8G zp(??T`I@K``vQvT(aKI5txFJdM{U4|^36#jVSK^6`z1rJfY;VyxrKK~n$2r4pEX); zWln2zhTOU90{8JdYyGET>^(;=QEgd_PiA$Fw(dIYfZt`jmgpIt`1>$7o&${5<@jhd z`k+puomNUFf|cH;8L_2!$K@5V6@0F#!7q-HFsu;ocizKvQp1wq1Bmv5zZBv~UB0WW zYaD+ge1k)WlAXxz7;Br|!W>I1qF`Dq1Lsii%ejOEdL&CM67yS+MQkEV6b6X{gDh(` zB9djkspJPdD}^rvO(X1^VYadmqsBK~mOOnk0W!}4y^Bu(&By1kG2K@K8v%gL=r2jk z*nEa9(oI{30{~UIT^-trlRmCnCJo6pdrz7k#8~gvw53#d-PjJmOF9$Bh8tEGUy9|T z*Sfju*{VjY0#Qb+QhtN@HP=WRwvb|$_a4||6l1huYqC}28b&c@Z-6Snfbi?xoHYLq zF?uUA>(OG%!C){D>6ilaE+3n6p|rKwEe+e^0_Yvpfi^$I_Ibm}k$yyxii-z!B4o7i zMp&zH;EQ~TjlgdoluhG5NEfS<3@2=7NNe=1N(a3Y_L1LaY$h@>Ez(k3hcg==7~OJr zsW8*luG?~rziO+Nkw|c&*TPtA5zmEVy=5f4v5bT@mo+nfg}nIStJYXXZgKA&+QQEz zu}1vn?u#CDm$bwQxikr1Rwo+wg~yu9?m~odEjBtxiPr{HiyGHr^8j--uFWy6l?J{3o2OELik~B^DRkSr#9~8zhW6Tjp zdIg60VS^HWb?KA&DvO}%#hf6vDB;P#2~MnsUo@NsL^sJv@$vLUr%7AZkhqIDo^NBy#E%1%@T~Ztr>n z2RowBHaaxJ$^*z;92qK;#xz>k7+8PQ)-5gth|41phJ3`9yew`c#g8^+k0BR%cd0L} z%-Pl5)3cF3rbKF!0mFE0-SpCYY}y!uaN>Bj(UL2X*gmN!0!#K*kKl$odE}N_tL#iJ z$N>!YL;|mB!}>P@+-LbRp$hQgiLo!h+%0fq5*R?$4cti~BJc<8*{N`%7@wO>iw`r# zN*g%P)6yib#K*!u&KS84`z-WUX20RtIMQoV)E(>A?TCU=`5eWY?({0x;Pq%=7k8Yg z%#G5#2F1NTm+PLhjIGIF0A>;T38whz=wxfP5Lwf@6~8z;mF>QB+XWsgfVVr_FlIFR zWXy=oL4+I^8wEz5$rLdn;gM^t4GHVVA@thP-K8awpNLyG3naM=WW%Z`0;3XUi|~R- zSd0Wy(<4D_Dn7&N024X_$ygk}g0A#NhLbV?C{m8VSDb&uuQPs2*sSO_r+zZpVpfK9 z>#wvhH$#nj6`f}AV>pP=S~gwDthJ?SUwDn}wEM1+MrdIxYU{9bTDrTrMiHmzsymJ@ z;oz%A;;Y#t?k-O&34z5ANmFzccGh-bM0M}TPDWck2$ONLy1${zT%P zK~~FZL|`lQno2z37TRnLB4E^<9W04)G|-wZA=hkDLz2}P=pCD_7}Hvn?qFeC;z_0- zXtwZSPS5r#hBx+fy`|#xnrxp-b%(iH*@vd|CT%TtyZX#!6-b0zU}nQ#@?33I(G6y+ zPsQBeWSE1#!kl&0y+A+=Z-aOCh{V(rZ9NvVP#Kjh6TB^Mo9uIeaz-JFvIW!n&`j{G z(Xs)onAV4$B3n|w-6;X+x9b@Y{q_zVqcU2akq^*sw@6^j!ZX_rL%-dnzw0qt+7O3R ztm`|VlNr`lLPV=DEY_4$oK`7qjg+?ZDzSAfBTcMl zuHsc$hJ3OA=jR+KNcNypfi+A=&6Cwl4RT6aLlBi`;l5O$S0C?-34HnyYO%W+_;{xO z>@G7VEkoCa@BqNl5#nM~UzHu63f})1$y6J)FbktGn^_oTKfBBFpSSzKX;NKGDU>Gf zjTrhLh!8GTC$>>z4`v(+V>po4ViVC&3bE8prbQ5=+cB*Jb@)s*6Esg~wD<)h3FAr;^?H452_5o`nnXho4xwabbj(p1MJHI$z zasc=AW4PY=MbFu|yiwmAg!fId8#@0^RHk7IdyCAedH(|TYvFt`kMHep`VKt0P96hq z`Q;;c6+$@{#XHOqw*dSvp2tDUZF7#txo>%QGhzX=?|w7Xwe+MErjs!>q}9 z9nUb=$s=)k5&hauJdUA9?RKWmXX7Rf(xfVV(YnJ==H%PC7kNYcC!ZkgE!gnssmn9A zCb|dkEb^-H1(u(j_1N&6%@5yEkvNcm#EAmF*MkSmdvZfCS z0yVB^ECj^$c@Do~o*O!3zlwg0h2jQa&9&mB7!o~hvH>Rj1Dr{Jx`H?nge%W~iR&*0 zCyk9fnVmjM=-`%|)l}F>x$)WNe#QZw8soa??S?$4jCR zwG9Rxc*2*f8n|K!_QotdO}m&v^Fr(s=n0sE&~6|Itw4j!M`*P{3MZd78> z=^NGzep&46rqQD%%9lnTcQ#^vffreqfrlN&hy2NC5MU&QRgrI4w<6XG2B9}2kc=(G zFNx+L8GngwV$EaH_-G((Sa&f&yypZPCCK>b+tO~gBP{z@(QNauY|oq=4l)u}EDE&; zn|*%(RT;Afeq+D2SUC+gJ#lh)qT2`JvDh_D__ZuS0US#5Vlq4QyFh*o(S#O@UrZM7Hj-4S z5}adM%}m<5n7=Y%1PIplo+NoOQ^&7+x6zF<8R6b*wn$MeOYmm4NKq}#5@tn=mL>@k z5vYg~CZtEfEMv^jWrWdI?DpX*BToxU$lh!$TPjJG;5T+OJPZw3GBsCwv<+KxN^Z&1 zmTkdI?m%Ok7W+M0ZH*L(owEf{F_D3RbD(ROxiQagu3?GBJfDHH2H40kBhQ$MDXFwm zoIC+PKm>@h<5*T3%O$m}e8xH&1BM0rJ(%gO*m8WwGHno9kcY5*TZ(1qKrp}%egatc z4ODRLc@lrz(w+0nsrkm#Jfk8X6HKH6-|?Y$d$rhR3_PY{WyR`EK5i!F#;>}7`1XID zRwbd+QS{SbSQUs$#zw%p%np@|F72m|4ypJGO!bm~!HUR+2J28v5i(peSc0S`E zV_|lVxxhXU!(TrN;A-E(Yi?JPR6vSG>^`7mGj?eq4a70sH^4lF7rnI-zu+|x1}FbRn5@)Bl!lq7`vHpU3Eq-K-5gSRIR41^4g z<$^4bpp66POCS&nq$B1z5hNTSEuZ?(H1PH`#2f@vmvDGPhB_67ft%FRj}6gc*Hie4 zh%zlA2p<|P6kTeN&Hm7A%_XW=8xjj`LGq>e@(3T8Efi`)WoUzy3}GY2uaG$cBjjnJ zkjs7p`#R-2zu+hx@*NzbsPjm#A1dROwql1b@s5wXQM%Qb>)wr_SzFc0oZN4_6WJ#{ z7KP!^H5879`jr@tkrfyt6D9L7Ksu&QEq1lcUfJ5%BZ*%zv0EdV9mD~jIQE9$;y4EZ ztqIDv3=)uZRsp{@HBi!dtTA{gk%kI?MU9Zc@zi4c_yidwt!K7KSyle{Vs{yYmfp&$ z;=Uh8#Y@k2jK=hA$0&Q`E)Wt>j;d(SZl>0)#eNLS3|T?Q9>ONAY>uu%VT6MiU;{#E zzQEp0YN~OZA4nyB$hD%xLk2||J?!PkUS=n_I3~|1&$nXa7Xc7`(3w{mb78K!flxV%#$!Xuo?!^5}27Njx|&V7KOrC(@4l=MAy-$s5gnqN9hN- z+p-+r>_^^ZhTUQj{)d2bUXPL?0-T9-}S&3&z|I-u?2HqQ4fxnlo`w(?t!&9+@}7 zPzpCq-pDd_9z!N|b#P=DZ6!I~5VTIk>wV+kI_yr$bJZF%40bH`+T|Ksv4EM!m0n!K za8z_*VW6aFU#yU0UxN&sce^gvAP+Vr42k^08IGjA zhBO7&;eE|_DM2-US^X(eckYD=;;r&OCjMGj7fVKK7cx~6xs zRY7hCtKkgkn@14D(aiN?j?orl@aq(vQ?)u5fs=!M{H%=8(iJ!<_>KwtxF#Me~^XK;;XdC*f{Nf!;}UISj2%5g3m zcbPA`3w#EX36o7OgS~`pj{TdpJPCMbTb8hT#w8lGUHf;~SE$Y=U~~i$H$Bk*{TjUM zb-C=n7*3@VVZIZJChYSu3?ci(ZBdUpN+82V7*Y0FNW{(kgNY4Rqw*x(NtzjtgBp0k zs_CVWun*&%ptX3x>XFDm^<^i%Y|QMG?&W`Pfokk#M?t{c*kyYj#3Fw?ZM6+2gD}iR zUfn3$iqT(Ag~z1JW$y-tY4|dM2Yc!B^IYK>@ECYWX8k1Oi*6{G50=1cTABc6h(+54 zf_eC>NQfmw0qTz!4TJW-0}6t|6M04~bT|OqvKgnyOlc9q+xGpC0_A=*0$*tq77PoK z(1c^J-e`;&F8e%0YilT8u5;mI*(%|<5e@xb{T zmP~aqN3v58Qus3{#Yw?ZGbxrLg)WCdha#aB7j~Y zb@n@9onAcn(Vpy-FZ<=CV=EM-MGMm(xofx2N1|@$kT}3R&ONxNe(Xx8!24_Hf#5Z;kSiUe^uuFIC z)Yq`1WsQaauo(J^#lGn7%s!^ANSu#tICvw0rk0sADm^oT&avc*5$iGLxJGq8%ks}X zX6%8j(!Dc#hw(bm%6XH~Fl2q8t#}#7vXCAZpw2L^8EIB{&F1+W#3s!!9%%v;W8}tA z#x!urgzz}UJGIhiVewYcBx~lSS+Q+qa5^+u#MII6xfQ&t5U$o5S(3|>tGDHkFWz1w zCqkq1P=Ma;dKMkh_1rN0Xk{fM@>BFg) zs9qcGiF^~zew1|Z4n{8anhC&enF!Obl)xonED0`xQ(Jr!QIB~z&~s@q9Skhhs8F&K zuI!Sbtv7_mPfdol02+Ir+pe2b4&R{BcxX%fw!iSKdLUlap0IP{xGoL{maM8aM~bl) zJ=a&D=@uujM3H#M!&ZC{tk2=eU}fn#b}zt0HS+SD3jDn9ohxpC+CzJSUHlz{ao<;=l3En8@zA08ZT|%izVXm|W~o2@=~emke*89DK6QZ0eOC2eOc*E; z&Sd?jom#)g$s~R2heI_I@c>A<0%6c_IUntz<)!VRUskqoSBQYT+sO5{qdP+{XSlE)>CjCi{Ky7&EXivQ~W{weq7?1wUGo*K^!z;anJLl$8tRz(J6EG9u0-vd7yqd*K@{<2NiYTMg%^5a37m!j}?$Odt6A47}tI zy7kNdD#CyAP_Nny{T5V92H6W-N&dKupch-S7{W#^KCnYQqi?14Yb^7k(cut`wPZIG zC79y#k9>*vGxNJnGwKQ=S6$3{7;S1iu_MZp-e(_Mag3(tX2>ykaf5_c4b>7JN^IaH`?o8B%)FcaX0= z7|6kqk=})cwmh@K54Wv@Cc$|&O!HNF`U5x^e=Yond6B7|&w8|lOYp&*<~0Ub%~Hc@ zUaqI-BimA#5E#XO&$1EC>OA8bf8u>@aMxU8Tm_b5aA{W%8zImUnXfFo%$ zKKbv+1-n4v*Gb?-Gk(1Uwwm#qB(TMdUcvxQqF!_gKfrU5xNHg+xIK~mcOJcf+YLfC z{KyBirhkJ-?U;@qcx4wy%JA6k3GD|J-JKw!qMD|+V@CRUWVj(shI6ArhKXO63~=*W zf?e&u;KsDXyV_u!*vjcg5+GcHD}NVF03&w%7TV9}p;DbjWl_DL68f^JkoejYX+&^T ztUn_BTt7tQXvZ>etX1d1k%=I>p#IiBgH~7Fzl@gmi_!9G57XbeRp(73RQ1mwH1}Ue zXn@*D$Oii?It|bo@54x{w+~G7&_l4HpVDyGI$cSN1p%9Gyq9Z9C9QD`;{JsO^r|DP z8BXf>8>EU=Hz-Y*A~f77cx1YChJmUChw#6`KtsN`rG{t^)BLZuXQc^q2S>rrkue#B zHq`vftTU(=p>)@ZS7tr^LK!x^|&89bSYK*&`fO0Ro8iy+c2d%LM zabF4vjGT#gQ0qt1wVs6>K#?=Ghk3VvRp(2y=Fdou&*6mfG#-D3SqP&I)U7W!+I(uD zX&;>C!1ud9p93@HUhyxNTSRHz%W|R4e~24?vvz047IuZ&&aY|@XZ0t=B2xK(BgJpU zCigFsqBbu%QT2jeQqYqfJn)SVZteJ0A1ogD zVk|O^^DxX>Ajtnqjnlf3tE@Pjo;p|U*Ga2t6X_>QYg_~jjgKyzg*lN@6t%Tk^l>$K zlEXcj;blvjOn-wl3GPN_mifzwx-D<>w56AtK%}R|L~RrTYG`t&JVz*Zq>QdGA{ub zdP<)JFa3w;{?zX-OmL6w=XCxI`n2+chF=!?aOuj&Tx1yFAo-BVI$-9o zQDzQu9$ID&ILz0PfV)*F>DFrb#);}``Gy^pR#avcVm0x}tm5f#??lpBhe^*5GxM1? zEbmxBFSdYVbw0Ee_wm3Vf#vmaXLzX1TI~DPPB2{cPMr4K^a^$USDXtJ((4I(AxLmR zfC2aUwL2wn08Zj1a0o|-Bm1qQtKibzj2w^vT*2X<1;p5eN7a21xICypW&^U$;KMu* z1{myU9*aALGD`;bgqx)S&goq(q&1#`%&wRtD+H%S{;VfY(|az6EHrEP>d6a?+Pw`u zKCp!rt0u>WwhrVQYI!A{iE1(D?npDbaw4K>!%({oe>z*r;&x4KZBQIAsV|u#Uj;;Z z3%MdhzxiUr5!&@_AcrZVTy2OQnV8jxokDHi*bV!Ywcr6-zGI8I1h+t};BrkF7sg^6 z5J~^;vZ!LJW7M&woEpXC)NyPj!Z0mK+(H;Imf&4&Q^)=>rp5$Q?cp$DyyT3RQ+RZ& z82^;URH9=4?M7A-d^2O89Vh-uTvwg`SXBUXBPo0!DKs=UjdAy{dRKgJ7=CjyOy*rqBe z{3D_#Jkaf;C$R9n$p_CP+gTANrIpb>Uy_DL_5larW^L_X(_m489i0JDQAGLPn=MvZ z(sW^Vzb4!c!ubhDlSl!MGy|Egy+&*`o=Lgx4vf_Q{HowP17Dv348JPsJN#i6I4$YA*h3sxI7sOaOZQ*C=m|`%GO%ympz`ei+WqqNDA<90c<0Xo8>#9C=T&fM z)l8lXojhCm=NZ0gAdQF76JCM+059Iu5Bp^{NM$ytPi9w2X5q?ya9Ij2s}I~+3T{L{ zI2xT$psx?ye_sz9udp~80Ii_KZkFa@BYLE@aWEF)9=Ui>i=8iD*$dI*(oEcD;{Zh` z?&|4nDsm7EiQ>qA3=ts~e~0COaXG9M$-WiNrT z8Qc)tiK$(~7D^sjlMyQz0Og-T%@#w}l7J&~2@fNzTm$r5)5pAFD?MO3T242s%3ZHS0DsB358u4HTp!u%&!7bc_Fc_(Ch zmWblWI=<=;j(|l|-!{OA^J_YCq(plAM;1t=&xuqO!?DNaB}_Oi&uFILGpFSn&C3~> zRAj_gFwm#Qqou}1d?n%)%@DwG10fO|vO+qqzYDa6gkO!P>9iV*<1i(jf8W9Drv-W>k;j?JyV zy?j{0K0Eb_p&;5DC5d}H7U4jsx|dRmaIVa($8Ad+ag-K$OoVR>JW5(g>zV~PgV?DE z*SGvk$$qm*N;WG0JhnV|C7TfbXk#;w){4G#j&Qm=2&qvAs_08!Fb?k0*BJ;TNJ7XHTLm8+QCX*D;>ZD!$Q)--vi) z88H->FkT!@LRgEHqxWD>7Q&v`Ou|YSi#H6@L9CFjg>r zXv`upTAD!m%I*W$I*my49-sN3-f~wVjNN_M-6@%L9sG>+kyoMG;yMW^Yc4vc8@wJS zX?RFXr2B3z{2jE+K>ncr!l8Tc?UJp}!RYJKChRn(ztS(rikGFuqichU*byV+{>XR2&HY5ERGovvcCRSdQ}1FW~B<75fm z&?yO(Ojrf? zK=bhd8)gh#wFQ4U)Lc_*F#Wca<$13%Li$(*ph}EwPpWs^*~DP7>P-O+XtJ+o~Sx)nlc4(6a=-#nofJdfcua zGt{F(J;tiXNcG5751)F7BZN^g8v@c{zq$)~jbhMI4b15a$7*Z$#GB3{NNKU)7de>e z?)Reli6>dL0f{GB;Q^_;)hJ;O)7JJZTzVzb#m|G39X~0O!qFbUfUJIV8QBhVYBY)v z7+Sb$5=cfRK0S`CARBvBdq{HJk_?d{{XlE{5ah>kPk^}UeyO^#saSRm({)53k3=6$ z1N}e&VJk2`WAUB8Ed)(z3UQ}>jJM1y)QBG*1`D9LT@ z!%U51mr=q-ocq6oBPp_lGgqP?fPB>2p$p00KT0LL8Szf@*3WcQ5%}=|Fx-_{@mgI% zu;V<D3i%g1BRIpN=Xf<)@DYjA z*h!D#re{$MlyL03UOv5{z}VC99@PP}rlH6<(ePIUU86o~ILJ8I;_zsAiQ!SN;SOU2 z+;1CztibiKkv7wsj-olyf zuuN1QqHq)o07-zR+nm=nhtGG0T)G^;6#y1?VoJq2u1ApzEAo0JYFcc@1a5i(gxnma zs42j)3UVRNxABuRq)9Fb8SjRd8@Q#pRX(2J3AN-#Uq+V;Xpo7`XS~oP?C$WfiS9?hY6aS~G6e{n4`zw4-<&~>;^~f-SQZcpRz zIevUvyQ`=1r*mMl*Aw1~$bQ+M6hdabg}k|JHFCE%!qbPN$WotU9F9`S;D+lFq&{eM zK}23)ZyUtzEIw@WJ{%YY^OBT=GDmHNTGZ3{V=1*AiYhA+d6`8QtD@grwvt8u5SBrf zMJiHTWTfL4Kn5YBbmV=LKSyxNkS{Sd?;*GC+YNLSNM#<)B!5=b)3gO^X|*DZ1Et={B=p z1uHx8i0;L#74bUEO^ZI}viF3OG+A+jj8al5{p`m9l13hf+tT78{`w0nVfXu{FoHF+ zq-S@E#$6sMhDL+o2ZC#p{XF*V_p%gaMaKmA-%i(g1nSIb>1Wp2sc_|pfZob-UF-7! zDtjKavaO#@gnh?A(9b5q&hiWq(!`PGS&w)j!tl=}LJL6t9}r>fnV%xURh=M0TC`KL z_cqo@DU9-xlS*<6Tu@(^F5VH$=3rd6giqY;X0DMgfWd9{|-6=a31rhO)-|ma%3&zmyd~xx{%tgpGD>)rX4t z*~l*YA@p4(eopBU{OWXS?Fmtv?e!!M;jMSb=y?5aK+@Vu^eTCKAZdwEFB`*6AghizkX48%^Ild?jeKxpjknN|g642(AWMss2S~5c;el?H_?`Fix~M9b&BIeL?j` zAEcP@2H^@Lg@9dR!@v)`%>~K29c&01`&?;!-srf~a6{~P{kXgSqSE56_1Jk?cYa};GhdkEZAZhIQ+#uiUhqh; zIIBLT>~H18VqdCXno*p={iG8smto3Ys}E376AgPJ49&ert0n~PK^x*mt*;o16iya+ z`{`RJF>JFzUEy=p#Dw=op?_urjziU8JbM+y6R`Fxo12Tg%wEduJI+giF<^cR&Y&7L z0B_0~i*HE10$}2?gIjAy zGfw57%lxiy|Zc%C3({GE7pP#R>o(3XuK&dH zKj1#DxBDw1|1C@Mi(UsN*dP#>JW z=>XA`Sgt3>mEZ#PrYq8o(y;{5pkc%|x>D6nHJ@k4*nO~Jb1nkLdCBp9THBN3bJb&n zdK9po3|=JSerssRZfG9~;=>KEzG)mTzQC%$ZJ1?p7qp_5cfA>RoeTPGtAFBoW}JEw z&B1>C-RbZfAL<+j{NY6I5T@An2t*aO_1V9jxldGG6sC9$j(boKGde2)MC5vASw%|9 zMMgjl@`U#zF=Sqf1)Rlg#s}g)xd^d16tpCL>UDy#(@^(71tH>%W2f2|Ubd#WqvJ4@ zJe}i9meJJ8tCA)b@2MN8_jqdF#?5w}Kr_xna`$7O5Zm5Yf^l z8nzq(fI1unr$rBcLQK^)Omf}UmBd|p_`f8YRWan|DJOadqvcLZ)!zNJ@rfwax?g7Z z4m%Jjy8zMZc4Bw^H=T5d?^O&nVw=9~%hxAq>ax!-?2VGoNaSOAZTO<2Zm}ca4t41? z`Lr*!y~k#2vY->720crmRh)8Ahf)1$;7a?=4Sy_8bi>lF+hzZxxt-R2RVB3$e0`p z!Gk9S@tC0=n3Y18N`{&xuTYbE#QA`WCVZ^R$NhQ3ql`#D)@JuKwlEy`l z0x?E8QXmW9_PrBSmFA;@8(9(O65Hr$8!$zoG)V=pKSo;{h}N97*A?+is+f%9^7Vh? zXxq1{tFcz!_r zpn7R^+@;VDN@-62dUWaSdS1u9L)=t0Yq<;L&`!Cdfz4Km}BvB>zvFP#a@Q~>7GvRnIk(Ki33D4x%(fa>1 z<*smu3jLU0dt$SG5(;55ek}iWwQHqUDGUPpd?;WnR13AMCJEOuLE{h6Bdqcst#zxq zdnoj>OgCi>cGL$KB#O7H#d`P7u;0Sn(tjUr)r`e0bJj#UP{HMI<9gc*Oo#K%W5Mjm zS*|0(5e0IS8~%4`FBMp5C94P{H_f`z8~1|^;y2ml_U$_)1o-S;cshQt zJF3XeWoduFxc?jiM4iXsE!0N!0qp1F&E`8P2~#}W+B*xywdZA+g4zb$gz^Gn?rq~{ zweOM0>Pbd--+RIp?^EvckoEmI`4QZCmOyOPBUT& zpnvC1%?!P06`?air#aK8-ivuj^()rn@2!DS+X4s^`{`878cqcYr9{W=gc{s|D4yQ|dea~B znmp9B`!GykX89-P8Q?@zln3^&W4{>JI8h%oO`F*Ohe-(7QeN z6jb2oHHH9m#*J44d#!ATRWz73&8odda`)f$_ucL;$2>dvf_9A1=`-)$RA2Vq`3A11 z%`q!;y=GZ1>eWb>`SVrX{N}&`TM+f(p5XG`? zFL0|NZr@P2DM3-T-O5Sh*1r31`g?Bo9>-EO<$`4Dj5KPUP$p_|iV1jmip(+()@S^M zXv%pRd?JT9Q~7xj@Tuv=2T^fE^&yd2b;R=fN~#Xj4utBP8tx7q={?U!4XgUVsGZ=} zp3wf{owa}Kf!c+($Hm3-v5MTpW!o*|M9<)!(Z|mCt~9mZdMv}kYlo4CRqy*f=x_i0 z8Xy3M`t!j#LM*@aX933IkM)yF37jJ)z@-HK0fA?|V(HVFGyAnJz~BMv=j8+zjnucA zz@-3I1BEjlruUoH7<-JWrP66@Rpi2M2n8RA#NL!k&&d@owT?5O|Vc zt-O}HH?{I&(DN$zo1yk*)vkm`jpOzWuwlcdvdyeos-$**->yJClrkQC3HII4YDhDC8)A)a-T|O*sS)O}eth2?r+t5XGo>GC^1^o+ zr|iL$4)%AE?laqWrcE4fF&F%14N`Mm9J~^*(fSVmec?`9uit_2v}6QS}V&VR%`tGFDCl>^BRkRYit~ z3f^%a(pgnIW#p7fD3jFf$XtMi0I!Z|05WIKi0uns=4ixFz+84M=2poG(5>3XCnxyS z!>=CTB}V4(VNUd!vvJ)2Bm|rG@VAlIwGAhD)>X4E#tW#3L-K8o;&%o!URZ!=4AZAX z--~Fy_C<(c&Oa!&rd8p|^t0OfsOt7LOs~2evJ({-^>NvkW-{o3JnLWWfdsf4_^{&) zWd5%UQK-ErPd-I^$+22&0$RC$TA1}*_T^66ZO9ti!i~^sbJiAZV#-(~08PmZ-w{!y!W-==*Ld0 z&5muG|7|EHM#W5as@z$dt@!CPQI43q2B;7;pZ~rYaZ2;Kj(z_&lx@Yo@oC7oK&sjC zcL-Sm$X@x+{ij$H0!c^1f>i7agL*!=O)H;+DBh0DE7y8wY(}M=WJR0^-Q`V!hVy(i(3V3=V+1!=Pk9MK8h^cD{}hep5Z^VrS_@fqMD%e3cT0 zC0MG4(2O<-C%o&SJK*@a|KO-Xop6u|?qFiXtC=Ud-SaBNQ*(7HeCt zAzmxPcAy&2h&O25<1-@7=5>C3lV-pp1bo~KNYplY^-!~BRyQY(4=`TS-~WU+1kP$Q z#4U__ul_RBgl7F#idc<(=W?a&ZTLScUH+K5CKSD&q z=Fzu+)s}?;fme1TN5HYqn#j)k73`0~SNqMcvztaVI4}UO@N-8SW>7Gki$wJ9zYf*i zR4OD|SWzKN1h=>oir{i8(d{)RjHIiH31f^O6{5og z0b%7v!u^taht*Utx1|;p69);#-mT+SAVAyYtx3gT5@33 zt)@Z(>9uin_h6Pa-L2{Gb{dcFB}@xR@7`{e1vEiPE+rJ-7Wy{GQ@2Jh8#+DGBWuH? z<9n+#-_Yr~-YP9H^jDZmj3h);B*tQX`_R*agbs!WE`40}r?cqv208k8(C3e&mpvZT zm;i@leq(|+sdM)@|E<3jKj7%mrIqF+pJ6t$oJaYU{)3JUs>ynej1N~;#|9#d?nhTu z#|EhLug0T`0guak5(fg${lVOKd*+g4zk8GMC_S_S0dwkf;Cqmw=0 z3Hy_s;Arf<%rz$9BI2|Ywh4L33Hbm6xU#HGz|hXOfO=qPce##E7@cqGY)$AUiP6^< zJO|=pQ7FofY5R4%H`_Jdymw^cy#d90>OU~A9fNz-;l1H}Zr_3!G`~}zt$Mi~^G{c) z`JFL|cLx-2uRm<+WQ=6+6J|v;|MA4h9!sA=@=7P9j^^F~frW49;&=!u9ANklzn8GL zpe;3EwOfB)NDw(=r8`o>&nM4@66(j>H~6;ND_ZCU42PFX!m}9Ox?18fTW%z+QdtNP z5%XTJSvMmFcj+m#ZQ;@NM=&^@QeU%4r?)qw^4m2C(hUiMcbQF>O-F?g9E0GkDmV_o zunJZVj3IyS@jV%UR`>K6M4S3ZeoPGhz%(lvs%kdP3JEls*LqDj#j1)&PB$Zq!4V7o z{x}e=pR4@<>r_A3F<1NER(zPN{cyn(zo$m}JzP;f^08GCp1B?2*XL?y?VGF3!1D)H zP58O38Bp)w@4#Gb=DUE{0tjR_1GkvpxZnn4kDJ>!V|NHBzwS!jl5S%gM+iSRE|@J} zZ)$_fn~${Ya$%KOpMh{=G#C z_nC_n-XjwZMv1q-e?VRJUWNPKZ(QUcw-v}ip+8TM+ezf`^C{$f=F?*ZxpDt2axWTH zK{HKuf_obZYX)?f2oy_17q=)K)v>0QBu7N(S z-|-Mw=vfLKi14m=KxE55$^EkS)K>S)9heG0Cv|Eej(`3sGOvDf)=Jg{Kd08@=@Qmt zIctKSPt_z~J{<(!re22MPxAmdwSQ~>f5WM#3zkcWC4N4IWsdpuRO0t-^XW!D@6R=# zj!PiVe7Z>j`RMf=AHv_Dlclk@hQF3{iR|xH&oIGcjHqZ?j*6z&Ho_)NX>##XN=*F< zI}eR^EXqPiLiw=2w_f7S+QtjI>>IB@>D{SwMO(pSuL7Hb0W%EVelVP0QP|e7WhshK z^SfD#E&Z!hKE>GZ;!P5Qv0*6V)XazH_w83;|LslJaW}RF(Z6V)^G;PhIJUYR8cl3h zcm_6I6@PgDkKiVU%X3DyaW`D%D1l#^(+#Yhn`o5MX~o|T0!nn^N2W;#IkeaH-$$?}G3D^BFf`*>q&z+eV&e(N`<25P*; zAKtU2_``@_KNgH+C4;#f2!#5l$osVYCeH={m0`H@fifI#$D8O7xzIx)cA?n#bG3(m zi4g9fy9Nrs-zsvO19LX=IAGVH3Lz|JzLUij=(z^#Lc8K(Ku|yE2pL#Zf^7ts+mJA(X0Ji{Fb>fPp@fm)m z=dra#g9>}JC%bmPca*$vk_2{Xp^pY1$K=hp!E4Uy9Q=_ntJ4@BG$sacN4Z{o1YRw( z?jKkZ3f$A0ZbmEKilI>TrXONGf%66{x``o0&jw^`uezM{d_{c+JwFqYLyH{~$alXO zQYYlifb6B`sq*GZGaKUO+a=Sy_nxDz9bn!a5LfEh*gM|H)=P7IP?{gWCw9L# zs>}FMKn$O74^i#I(GnQwKh%%c-T$?Q<58r#_YN$&n9n?N<}WB>e8#63AR~(7v_E53ibShiiV}(~!*qsa6)gLdYCI zDtQX$k#ygOYuS*KJqGbf%w5?fyqS~68GD!5XT}L%D{rqbKxWnw5MF}6_!lkdJsb(6y21YEwRR ze}Ij30XVm4gQw4StOssbGm^~ug8F{aeH@m2d@tUvRc=>DzY2F@mFqQ!4fGAlFQ$@- zQ{HyJg>^N;@6alD$TVB4#KrH(yi5AOUemhLl>vT3fK$cWWpWP4J{Qe%L=Iw?$xf+_ zM{Bwicu^Kq zML(U?tKQr_i3?R&yntO zC9yW?1cnih*Nc8uC%e25<6-ctzE7dpwBmGZTPMO!)7S(VuX zcqNvQKyMpREJW2F7Jni_AUG;!MvACHL4e_ESwt2KKWU42;IiWni0DVJ^!PjuE>~0^ z<`sh`JQl){bM;d`0xL6ZBLkuD#V7i=)y|32YZg^M8 z@c+VL7Y~o0S3YrkMdahuC9)BZOYCm!sxl)xt^2T-p1>HX)bGOK1I~-*P8=Vc9Qhb1 zU_Zq`kk*V~CDm``48kp?xX!2Q6)+{A@Tlpl5KlD3!w4O6mJ0i`@hC0EW`i|m=zxcV?17%D7q!^E=uN3{uB|K?>mA-~kb6MQKKK|y zH#Q4UXrr;51zO=s zEc&&Bm&B6K`48bkvLK4pX)fbs4rKUHF&Wfxv%{n5B>m}==D#t()F$|hzWjGY@!xN- zUZMDJsS1Jr4l<-PVAnPFP@?thUK^;2pBvp~5z-=i2ZQg+{e<2H;v$t7wq0*hQ>N z-BobenjxQ>uPr?9;$iV~$CsB*L4Oz~P`QBWgD?31-171K4({mzBP~tq7|#6SpJ?yv zAvV5bdtaDNl0i6%iaYa5{fMJKN@GVLY(6j|hg4%fJ0acJt5gV$Jp}Z08XF6)F8i8` zdmDQTpi(NsdCpIz)aY!7&nLVFy6ki(XUg?U-2VGuWX@@-s}wA7H1Z(~zTd|Xz_=Yr;$ z6VFreBcyG{skT9NoczCJ`(f`!DSB`*{2#@>D}8v3T1}7t7b@Ga1w{W8z5j{!otti~ zf4)ComPvBz`XJOnN52}T^s5&~ruD02xfkSjIS!GPw)H7|Wq-EMbeng3t)fnG<>lwy z$lI}DuoA2J_ue@PUjAc8AGieTMkV)n!#A5(Sb1HeaG9S6)(3sOZ$PrF3$|z|6J=d~ zJ^`OXif|#O0?z&)%iE15vDLT~A-3&-!O5T?2B2-YKoo@q`Y5A5A+hS!N?tV_c?#7~ z@+!U2^nce1F}dL6W)KG;h}4!_ff;WF7%mY31RJkHP-e!93={wl0ujIQQeSyu4lmxU zP1%gwdL~Cc(z^pSr_+{2Yy?TBtvjbrDsy;G*|L=a{xP?ft^_3ZGT%Z1cFG)`j*o*4LN*oR?A{>6* zbYq-;&wNHoH7+eTR4Da2EEJ{b&K^-AboQGWQj#6E2A4hSBF?B6e=#J?CocOkf&ASU zL&A0j|JQ&NDUJ5*UEhVt4$}gy@l}8*`@}ya1W&PzbZ15VMr*uWLU{Vt#QNs)AXL*7yKk!DJ*3xF0#VaQ^3Voc|03Oz(QVyC?j047z5{ zv$0+CFD*I53UAAID%)b{tp!b!MP0V5PTQ0J~9FXU;XqKL+&QzCV|Wieqo-k5ORq? zUi4|m)l$0JazMJkyp{%f$fJ<@^QIls5czJe2vFb;fH z%WiQN;KADA2B%>$iYJ50v~t27xuUoW*GcmBnBl&J*2uXW*vq_%TWy}Z@bem~<9C3= z#9N&%K;vg-%-5kr%)XQ1S+X4k+ZfcUyG;+vz@i-P3PymR{H7QC)#`Fh{}bdzSaDd1 zH|$?wqZYu1PbmJV=5-=*Igo%nG$(qCC;B3q;-pLX2&;V|^$ucELx#ddhARu^&iJ`$d~HEiaejFsl8c&9{|~VLIJu z&tHA#JhL3YPbO4{t;BstE$HsH(=Smz`%i;iMZFG$e5U~ zRaTABR^hB0Hbt)o1%idUx@yN56a72`f?CVj6>Y`dVI+Ct;4my3WWbQ#XRo*bjPu)cQ&e)6{o!CoT;DHm)|}^I3w6JRh^`;{2cnRCeV0pHv1x#N)**Z^!6sYl5h#GlxRNFNNd+A)3o*(w3H&*R=FNF4Rms3aFnB-7@e{7c-9ETd$ z!#KUS=Tx*LjZJeNxpL-dgC4Wf9A#ONVCRr@1o4NxbS>mWgJ{}J?K4?Ma}%k`87jnZ+z zR_)Ntb5>?Rr3`(Np-$8pVj%#^r>;z|7wPq07ktO;OTTlcp=_~&7%9M%Z$j~GFZLhI z&K*5F-QSK{oSxzvH55E%s>clV5J>Eu`}BP(HUVy7mzY=y zv3&>S^1<_=gVa~L!(Xvxk5OF34Y^zu{hjkE^0(wf$rKQbZ$dni{t-`eVucz9z0BLz zolgyX0<>B{P#Dg~Y*8#=EqER4P>^ZZB)C(Byw-wE45-2fQz|>c;ff_tU&`77wV=?j$hTN{_Fkk{JS&XDZ#^|g`;Yhh!a+n0Y) z*JS8pd{UaG(_W}k9!g7{>AYhcCkBU++AIeK?l2@!cq~wfTw#_^MfgH<@=T5clc$^4 z&!9a9Lps;S6_TfgI*sy~AR0t~Y_0j20cQCKvLp$g##68T*cH|@df*rFo3mk2*e-Iv zs-a?-TaXcojjcfe*2FP=d1<)w>2as*VwO#UEgBE?fup81r9v$zsk~e&!QwWo22T{+ zwY7VR^+0?`oeetNpCxBUQ`w9?3tisW46Tga0UsknjJ=uWS+MbPlqO6%M}@$oe`H88 z=_^3WKIc5nr&8Pd%~pHw2UYszEmXQOf+n?9$FOG8br4Hh?$?aHgSUn+mth{#O>`m9 z*wKaTch7|rn@|8gR|>ZkzYK@9&K>Y)<0R*qr`2|b&v7mndJTYm<*T*e9}p=D@BdaI z;611p?+b|cY^3UAPs+$+M?Uo8+jX1I*zA4{(ht~1S8cLZFh=X?*>H?+l*i#%&1!ZPf>flNk81 zUmr^RO4&w`-4khjFQXvabFjES43#t0U7P41KQ=r-;Aj^eS-|vi8QIy*|UYVsiY`jhD8H=ODP@Q*#vEetp4qt7S=N9k0capoUc&9dglQ`^r zfnGbc3EkwlQK$eq-wr5HinHjH8 zf6y`MJ_#(6rNaAIY9vnB7os+SF4Ymd80PUQlq{{*>Wk@Hsyx(h{jx}4MnKb^6cWE_WUp^HiK-U69|uYJfn z|3cPnaFRQl53R^~t-NWfW>ZT^EyQ2~9kkg1>l&n}L^!89z9?pD^irZR#4PoS@?T@~ zPUl=w9=nWn{a)tU4EobyEV7e7L{-rDaT|A+eVC2iK_L=cxCu%1L6?|pJV14&tsGX8 zvRNe&qC}sn@u&te=G}o}MG&4KRe2$o#F$)Z63~OThkqW<5h@bK$v={B@Mz?Xi9kfw z=kQ;ZUa&_<4qEc#gNRDehe-kUAI=e!(*#^5EIdU-pKU1{=r z-Vio-@8i5_XyzA6d(bn7fYbTY%)#JmCmH+R@ZEqkZ8LqKCY1S+`f^d{&Yh;Bra4dt z*a}JiJyJi9?SiWn!}B6lz0te5Ef?2$=FYwIrkP6^cUViR9O4N+YI|m`pNO5{?Ug^iwcfiN0x`84yr6Za(U0k^>;;2W=~Z^ZAP;= zag)Z1q(?=VMZg)P)23tP!z}HNX-JzXievLbkah@3TbXydcpy?Qa--;MsluRAe^jJD zRkfLjb+Z9#&&drXU25<Pih6Q_*2Azz7Ye5IqN~-X&ZaCRvNG{Ge zN=S^0a0yGHaBpbQvM!i6rv<1c4b}YITry#hEP>d`_4g>0xZ+|xX?6(G>|Ho!05Qv9 zm^ZSRF3Q8?BW^e7zptQ=0!x30M#Lm3L<<}5&XVLR1vZC#VdjJk&tShax|=aq$=qan zYhKpTZdu2tHbg(LAcM}!I!k7{CYI-AUBn><1?jMX$3yc+7I*fyW^T=yT8uS+yAfGI z6itHkqtWR`+TO6*O!^8~&+zERJ222wOQl0%s><&ku`f;GrNAkxxR|rFS?H}B43Ng5 z0tUp@h-k^rl!OH>pn|ts z5LZp3n zSYL%DM3-3l3C11wgT}bfZTmGgKcbV0F30@MX$*&>nKjR!t|*8v_D4OH6Pn8gslCzV zBsPE`B6mssE+?mYhSBXfvma^zrwv(aoHi7(y<+@)-pVFYiNV6Yg|Z3f4ZT53@?yCH zu(kLb4Jie(zLxVhUb2tN&YoTsNQ;|dkusTW5Xl}T=~NLMI*G{14Cm}oFu?ImQomGM z=NAkk?%~*mrOI!cw;>8&*f_hD{1W<;4k_EEYi0=Q4UU`#;swQ8C%0TV#UICi*zyim z7I!(ndl5F<33?Fs87~6xmyV;I5nKiq#$<%!ZRF&4XX;Q zp5uN7f(Moa5ubTS@@H4zlP`rW7)s|YAx>Q+a$zm`5|WLa?p>*@I;5?TGo`DW%Cbt! zk}$wIQpK3Jpj_zY5C-LzGt<5Bn$i`seI4^kafd2hTJ)IS_x_{u*@e>bHC^P6+50yW ze(6H@A)|VnM2G|u7UijO3!g=1J?^rVU^oqvHmdygo0-hbEI^eXu~}Upwo%YWF#fl_ zxE4_;+aD`RtlcC$r>HQsya%F|g++{t;+R)7C^OS4x_d{pn^u zMKP7RMtWyym|@D5jt~Mp|3Z(52o|~ELIiq9O_nVS>Tpl{VFMvl-UcES67DlF;U!(3 z!brlFC&`1*MUu>{A~Ik3FT^VEgODWZ(G6(~Lar-NOHjp|N+rRXb%aIo5+m}8P*~;T zl}N1=j#XWRTtr4atsC?^7JLluyVk4_$=xlXrxu8%g%^%$@SYPMDYJMAq+NYNV4i#T-;Yv#t3BBrT}} zE)$zf)yRS@D+!5c^-z0}yIB^T2UQ58h5{b+cN&4kxSbhO137!K{ z2CMY>8%T(}!D%>yLxrgK zz!i0uQNtj0Q(uH*9BzBakKWRtvkN5-l6ZBq zHIg++9B0Zx(Q8_t!Qr9!yzxFElEilph4$@NMXNz!$*Np4HnHV;b{C(m=adnXtOS4SyaVe&HrNJ ze-QlF9Kft-UyP^&XP`jZ7i-UhkU8(9BmLRm5HmUhr3JG~F<$;<*9DK(>%$Tzm-G|iwIZ{BRTMo+^I+(#Tox3nXHYtvwON1DS9{hqJAVR zL#BUs4d@09!XGt6*oF;UgfYeBudFu-ZBjqIZ1%!P#41Aw% zIc5pA&)SD`CeWOOtBhc%8I)hJyV&C^tLy8X<=6{Yh|GG#hYRB*H1s)hN05L9Nf!3b zCV3~1lyTBh%HKdd7R>Rj3uz zgld*-i&(1LrodJvXBR2o@`bHL-UxB?mk=aN#wRSoYK>_&DK{j~pwxohkL7G_pL8Yv zUonK!*n-eXx8@+Sza1WC?Isu?OBIHu*o8}M5u!leg!%Nv}A zXc)Y53vmpcDtCu!K-TZob2?oh#FhDh^+5|Hej{xJ8nNK8oXe(*rP2(+DUxB>4ybD) z2-A*~up~TE@<`GMvQ>ErDL=rWXi}{TX68%G6tHF-PPvbH-GWi&gz+R6ndZ}RxW7jX z=B*&bkc@bO+Y+&tIS+ zUgxRcnWz(Y0r8Y|A$KYcl<=IVvjQtyfG$QY$4T;z?QOV^INzhxq=S75;Kif0i3*ha ztsa?tE=%ISlgV%*lK{%ypgGOr-CBCLm)@PFcX#P6NN-Vk_mSQa(mP6e50>7;r1uEv zJxY4VOYcPKoh-f6q<5zDo-DnmNbel!JxhAelimxYH&!nItHpRzR3ZzV?QTHfy(p0& zeFMh;yAv^(OWn9gOmL!Z{6c$RY8bwT-hzS)Ybz?O#F-;++qr`->J=}>Gh>6sjiFb(UHDV%~{RU|>CwkK`^(Cf8 z#3T?ChGD219f>J{m`Lk3F^`z)64OdzvJn&ME8fr&(^+C-iRlqBk$z925o+NEk(cNiV|IMsqwC$&&AXU00S0~-dmK^uXhQc?rQyT+%cX9vb- zr6;9~36$b|0S819l$@Lz7n|woFL|aY1PbilBd~E+Qc7lLXJ*qTQl?<*3~WZQXwj3H zGm>6+ISC!2(o^F=1cJk))bw$#^cFocGGjBdGMs@udIS#WM}>>7xR69w+_-4Tno2?( z$Qk*eB3-Wd5Dyt$@e&~^*jExdBr!H+jEe+x5xk_R(=(j}Kk3tzLZ}PgrVetAk4>YJ zV>2?HX|d_xVh^wpTn5fr29kVGX0C8uU&Bm-@y94!gb+BrHaK|-2vok}A) zl!QSxRU|2Um9y`WDUvoAkurwh-l8XAb+%K=piHZlAczNR8397TmX)|mQUXdw^g%#Z zx+fr{s0vB3(vOr6Dkv=t!3U@Ica0CuN=QH;i5%l0Zc+~VhxT{&A0UQ0gQB8BBSqPj zBv?r~l2Obft8KPEJcr&y@L<)}p6G z_H2kpwlgg?1HUO*Y^&DFe@{#WARNa8P?Z9y@%(9bq!! zVv}9z&a9T%&e*uPtnoyms;nngSR=0SNtuIOlJ|HLI?I!KQVIz&vGR+^il^+xyCPz< zLAYe{MjpXBnSGLllaw%-K#~l|;i40h5;Cclty;Ehm6e&4oY87@Ql^uz8!<@gmT)mO zHa^ldDL6aRl|hY8uMlOTMMk4+NHXTpEEI*}fnu6EdaNrh(}P=O8via8NIW9FTCDWBo6x9G(4aSZJ^T{`bvX$YgiAzdqk!pH6h!Qx?l`ZQnlsl+I zAd*p`FeR;+l#vF8#g0yPwWQ)=Q-~dWX1D^=lH#Py$Z=A^P`^YQ2SQ23Q={=k3Nq9& z^l-8(WlUyb&EOd_fjubIbOT|4$3Hq%Mw&rI0+m>TzpQwPx~8Q1q=Fuv{6HfUlE_88 zaTCd3GUNg&Rnn5?N=Sm6Q~It76O`1sf{E=ieIqf8}XtL4AaP7WvOJSkjN#pl6O(t=QP&h*qt61sm=c@+u< zl~jcvsGSO(=p-c=x>wf6nXyC#)x`?C| zXNRXugcfjB=2LEf{c~PHr8Wpxnfn$!Gqcm=Ix=KH#DGE0@JKOqSa@XbDsqstMOQ*> zR&r*TOHzm#)FjvFG-%ia&v#`eqKK*)6do2U7}S|NC#M0zSHBB~F;Rl)(*9xBC=*lLEU)|9A> z#}iHtlu=RcNPJSmuVZ^>W|PK50s~uk6kSG(p5(g;if{j*Va|{~F_Hb8Q9;8a1_X&D zoUCZ!D>WejH54gwl~yF6j8hA#?JAiOW~gg)l!U(rkBUgDp;=L0Q!-O!|FX;tj~RmS zs7+h+%!0Z}N5hJwC|OMOSjaLOl1k(yGb}xId~okUK~zPn3jCA^`Jy;cq-a(sFk&Vu z%=1f%Ks8y)_A~>fc*4;3j7S~RHaZz9a3X1dMhxifj2JMWUrdxUTpZ>E)d-!ystDpY zy3#Y&H>736j!#Q=1&>LOjX=98DmE!SIy$s11#L|n(6)4<`fLlFQCZ0?l8P{c#*D5R z25D5dA-)>XRoEj;4f{~kw`dS~8pRY9mzt80G^XW*EOb^fv!%u~X~4W-4PrnWv`j$z zOA0UP#!6ADlA|i_gF{u;a_6flq(rI&JhdumxRbOzpWOpVsd0vdM+^=fyo51cKB_rwRkf4x0q0Zp&!DR4TDnG#< z%m%pqo=DN(U#_K^Yw>Wq(_3=_^{L9Y*T zL*hf1Cw6j$szP6KJjMXz{Pame{|IGuJOp8~E7{ZBLM$?Ing&Xmfue$wGBZdq4@*u> zO{Y?bKuL9HNNjT4;M8%zAU$<-ER`}^QY@*Nv1sFgCuqwg#iQ(nq-JD7mB^u>H&D!^ zP-w8F5qXuHc4?%8D|P$Y$d*|dE@vi*9WA{yk^pohtTM(Wr8%W<$#ZK8oJ~!Wy2^t@ z=YXie&fuWv@DQqw6mxv4GXovNxJ1&yuH5k!6JwJr%R<}sO(@ty1cu2q zC6$q#k{LUhASJ0HS(gHhHXhwo(WoS-wW;n0vMp8LL6Jj(qMgy>+2o55Jl+b~cmDqHb)Wyi4&^=8?U`cz9u9Br{ zGE&L!f0Ct289@D?4*8SV6bI*OOmgegqo%sP`uhr}baC{=Ad{-ZDgl8Mo;H2GIrm`VZBS>{TE9>&gqE+d&e|V&`PfS=?|DZ@oGo$@iQI=#s9x1Bn zhqU)3I-o&=0uq{@4z)-c*HAe`mK!IfWHxaTTZldw~=8!0AA|voayt>kX zu-q>t+(bjOQZPsj(j8r+1o`QlC50pSREC9`fR?Tv0wWGD1d`LM82_n;RU*cbFsw+1 zLeYB*Y%H5_^LX3N9vm^|gjyT@W@*$(#=H7B6!P&;=zu6u|F|klbau+${eri0xv26djT};SQpW{OnG)FeA0i*n z4-G8hKRPx64IQarCD%+S7#K+zjkcszs}hD)`0FqGBQg(hmo#*`JU%UztVu*=O9QO( za0WFlEIBI!B0UMMm(fybb5^$hJoQF35@$#Z!I%WPVT3E7N@klDJyAJkp)f$YGTT;s zfsUTO9`F!dX_<+T1bO5v18&vWO%wyE4uT>g1`I{r6+(u}BSIs44@QqV1gQ*irIEI4 z{1B210!zvL$53*a^E7!YXEds1M6N@tFDQIG4y2$Xr_}FA3 zXQ)yzct5WMn8qZhFYWL~^m5 z=$s&bzS?@E)c8$GaS|FOrBt~{WB5{d5~=KsG>74hoI_6*hgAL&GiKT(Am$1nc9@lu z06#Sz;ztD_OLuYrvjFn|3jiblS*k^jNg%s*asaac^8gC~l!Ao(_YceQN|l$lw~tz* z)#(ieqseTxSgclGUz^?T@beF-RXeaw-Fo#KG-%kUag(OanzukptaY2V?b>(f*r{`u zuHCx#=-EpM3JwuN!+Q4#@7pgTqJQLosDXo`2geKBb}p0$GZ{|$0nzwrDslj zeaf_)nX~51o4;V;TZ@-2`+%i5Ts)^l{=6t}$_IJWP+Cey=_vzcq)e2VvQSpam$Ko0 zN(VMM`cnZ^EvhyZNY$b0QuV0%R0FCZ)re|LHKCeP&8X&73#uh9>S#^1q1saIsPP&T^x>DV#o|HfZQz8{c^`ZJw5mY1)GO2o>NRQ(o?GKbM+A<$>}Gskf;m)O*x&>O<-y>Qm|q>TBv-Y8|zK+DvVw zwo|*Q{nTNqh&n-?rp{59s6VKi)E(*p^@J*?7+OVZXd~@Q`_q_?{m;)@ESvB=7w$f* zFg|&XWow@2ex>cra?Ib#PnEOV{jk#Z&htuRIoa&xdB};0@>5pLw!#j-Rl&-tlBga- z`SXf^Phs#xR~c)ynEsvdbd|%UXLo_U6!_-TyHB5cQm=~bLKP0TpI4cya`B|fZ&kF& zMdin%f8(Ljx{{=oK_o*}VpVa~@Bun_9;}n8cq(J9u=o$ZKbBPnyjga?B4k{&J2DtEG9$@4s^5PI@m%|~Sn zm29mD@#1f_K-HYCPi{RtW5VS3(%$=CnD+I=mSN5{p$ns82K8A!rgK;CRljdFXx>YA z7(Qvf)8hSYwk>L>qi1s=W>IhNhO162s_Xc=Whc|Tm35Bv?qyb`ryo^&T^`ujXVeda z1N8OhY#g39+BNpG#eKHK&-@@YuwPVg!WVIUdp5qA)1-sfcXtaMs&RdrIo=Ncyp8V% zK@F2uwrgKIBPVfy+V8Y`s6jbY?A<)Qo$g29R!y`iKWwxZb_BPuC+yzpYqSm<_RhOa zTejGBxLNGRteA%NzVFef!@i*oOS9rto$IzsOiu_H*}sv0%&M-Ry)s&;Yt203TesQg z;o~|6I@-|#o7EQWW39rf`j^t{nk)&ke$q!w>1m8~#&l`hy4`kHy%i@@hqp}azPR=` zXRca|sc94X$9(T@I61v>Q+n5fB5(WnVa);-e14)qvt>Pc)mk3XLZpl0qg2h7(d`_) z-;9jZyL0O9Ue%;AmvC$&OP_1k*6?Lfp|5?={Mz+b`F-B7`5z%eyM8q&!_n>gUfo_< z-|h2};maB~wq!0Ws@rHyE1iC0-3x76Y;0+$vymUI3*6YHrPY>0cQiBz3JlNi&+*MU z+?esoXjf?DFAQzqmC>!gU}=@usrm0-9XrgtEW8qSxN#F-N0*LW(l&8T8h(DFR$a&J z_cFZ$=QJ{PIOj+Y40qS|3c9J#(G$b_1*+Q>x>q)9H>`HOkc5~{KgM*n_@;I{+@e8Y zr-oru!V~Daqo-6=DttIj-VZWl*(<4@bx&RaIyUhnsIW18pY zzEPY1a7bfe?&6CrHs)9zhTPI+TDqu(-tww&UPt z6O)q@`1UHJkFwXIRV@3ko}c&It5>NVIX_3$i(4Nxtz(OrX|0B?ZP&yc=<1h~Kk@C% zoS4o{bZc+LH1O)#yOv?nM7O~>-_@}D{7zxb9B;l|-&AXrJJ!!UzeSIpXXt@H34u+_ zSxetETRurMseA0qY0XOehAUf8v|CZmu>5oGS=m$N6V>BKl`j8i$oa3H=kv>e!|dDT=We=}!8UTvfk%7ROMdCiPu%y2 z&zzi1?>=(hx+od@r<`)%x+WQESDE{+?BVPDyU%XP@ixfZb?+)P4ZP4e*Y<(z;g^+9 z-M6JsISFH~yN|7sV|eeGyHxhDZtgwz%}bJP)Qn^99T#N}wCswHhgHT(yPTXo_5QrD zeapuy-&)=?x5b`w->g0R!LxI;*y`=0OTIYwvHL;}z2vU@99G^ThD`-GpPxVL-V5Wv zxD9`;{rSlO*wZtLpZ~V|uU#<4W&iqg{~q@Nc<_DolfS;+^5|FMVc$ddO*zT&-`#az z#~qIF(0u0p=Z6a=BR%U**_k5uXRv*3-lekNf0k^m@v9&F_>q(v{lgP?aS5Dra;7Z2 z>%MYRGS=(Ap=|px_hEd{AAr8srC`|wCGJaCBx8%XpUQTgc3&hO=rZ>S8Ha;3>M$vS zoIHA+`=V@q?)A9rm!s}NIIPiJytjSxlRfYiZdi5hqwjBh;l7zeJ0CqizEKK!=au_U zkIBqh-hb!gpLR;NwCzsW?`I@*_P0CZ-u0uDMrg~Q@9h8GeH9<{Hmu>4EORb=_M`%x zf+>~g(E3W_&-JglZ^@pQRPl|z>@>2{gKY61 z-UnT36voE|ObpIQ1{>DTU4Ids~!r+c?OT7k$vAAj}P zv6JrAh^|rpkBh%q|KK~=((TVa+_U$|Ss17E-F9!|_NV7ywDq2OX4%*Gejpxxxb);q zsl=8g?_Pd(>ad##vw!l}e{I}Ret~!xc9-GqF-k5LH#Oi3+v@_SKi^Z>F*9Oh{u)V|0{vEo7 z^{wB0SZKfY-I<}oO#wq*snD(j6lz2e3XdX37Q5;Q;`I69?u#?*mMA$?kGYSe`3qtZx!n9zgdk^B6g!J=IU*E)T^EJFoOJhrPs3e$+LNzd3EngubXf8I`CIG zc1#F`DB}O-$?2uJc%T;?g~`jzf-1~8vEYM@$6}%h2C;WcmePK!F za-kRZfv|VphX}t?_;%b!h~s0yTJKZD^OA7Xn-NE5!G;V3@E9aegB_{N!82 zyIKg@x(0Et720fDhxoq(F5e@K^}@_q8<5TqLSVm*NNbaDjoOU#HVa-~{D?HS2p{zP z3F&SXmhIb$w0{;Zg>FOog+h;wg}`CEFeYFJ@Yo@!vUdWPUBZtCb^)K=f{$qraM~kG z8MGI8?G^CQ6bh|r{nNoe~}`K83uU7S4=2jr^S!ihKT!JpL{OY0n^^X9VT%XOP#k!tjsJBERRr zw{ytzIlx{Nw`ie^Gey>P67tqHx%733Rw5T-`y>bk&u zbRG1%F3j#;44M@S%x}e@+YMpf_#2?z4WS-$6ZE?&TzK~;Xn0fD*SG|9ED>&ODgiBT z36Z^Tfu6S@Z?{0xKLxe(Ptf&GA-nib(Dt@4DD5`rds|rf@HS|CM;Q0U9nkrXu(kXS zXk99NkW&hJmkMV3E@*yNXp(ambiXTHeSR0T|4WE?{V&k}FCp>4U*N$#K}fv^KHL*d zU%v-l+!wkz?}H!rg|R2@gC`G!)V>eEmj^=spC5oX4+M3ahv3gcVeQ8c!J~&lFViFN z>5=gB%tzqWBcbixN8s0E;iK0cgJ+Kg?ZL<3+Y@1W$0y+36XD6qC*U8xy`O@IPX%kn zQ}FSru;cfq;ANRGH>eE!EEC3lQ3jrt3FFnzz}IKOyJ^qB+h@Y{W6!|f=R$nP=iu>k zLI2)!@cFq=`uI6`T`us$%fat*VaTR(@Vs2OVs(S>ZedNP8@zW5KNq>d|H?-ypZE&0 zZtoK0-FR|PkB%P%p?n1Cx?c^-zsLrAcd`X@=H|gc$wF|CjxoU}lg0+4{0H}bGCx>Z z>)qg!<30+`zxYjX+t)Y2@2=oUmZR{0Hh4svVuZOLyf2mtslA*J`Qnl~q@=wmBxkWb zgrWjNd?qyv>HVa6$f!B(LX@?-hTPpIgq$4LJ0z=4WJvzS!6E0rd^M!)>!U-W2PcJi zcS;LsSa(v$B+Imr#CbDA6y9?}CN9hiS#2u_dGE7DA%Ptihjcu!G-O}w@{m2xK16yS zhwSS9Inw+pWK-U^NOxUG+bipl_NI{ieSSjvg&~d~cLImKA^SQW1Rh61rvCgZaQQ9d zdera0=X}VfKQ95NKSI7*d;@s>8Ilot7q~qLIpKZ`{GK5#OcxGTh#mW|qP+(%THC3_ zCQZG?0d>{lY(K5I*P<6q2BYZGn8lyGt)j`xCMK#J;%1ejTHy#`Iiq!!J^z>Y1&ExlTc9s9Nw-->B3?u+dxo=NE}?wQh6oR{BSti8Oa zn72w0cl{JB{&GYVzqk}8_IuDr+~n0yyi=>cSkiug_-(&|V%xZAG5d`eF=z2mF>Lj4 zasR$oMdj6zB1Mf7*ZGeY9bMza&chN!pGk@0qIbuN`+i6k*Pcufdp}7N7x-m}Q+sBK zj?t6EQFF4zs8w%>*N;vW>pz+u-p6&fgS|d))$m{}kJgx-EX2e@7g)u~ck( z<*wLMcTddjc3=Es%meWIp%}6Kkr;OSv6$xfRNUXEOdL4znW+5qx%g*MxmeW_{GXYK z_8|Q&GD}A0*8~8B3bR8LW{0310J8w|0A#+c5U>ld4{!)T9u^<~L_kG672&BD`ewB; zcUAq*t*rT1v-h%Ke$C#?8~pc9XwT914U7KLcag-l=kZ3 zee#pE9ydw*4o_*Xoevt1Sh(YlUZcW0HS*PPmGfw>$gWKtdX<7=ybONLx(!Ge(z9it z*_&sTK9)MIdJRo_C9Hh|f1_5dGX*s4(EHVtxIw|K>(#PZ?X~N-35kx+NPaCsXxqGT z-6k#C1@(81pEzO6h$yjp=Z;-^gbo~;m_8{pb!_ag!F~Jmiy1z8Tw0cgI6TGYa6>qB z+qpt^8JoinVcW9}BxYS?_AwioRm?&rhe=_^FhiIyrajY)aWF;(-CCwpaaD0vaa6He zQKzQ?MK^a3uZ3$ zw3_y&aq))qS4KU?%;sNIDfK62Ig6>Q)Me@dW<7tWPEo&6$Ec&22|bAU&^;(Qg}6!W zCtP^85i_OVQ){U;)GGXaNqt6rLan4$Q2(NqVOI5BYBA4U4UjhC19#l8X26w`|aC^)Ux4~?2OUxTL!whm`%q7>yta2SH5VOnym~XaY=Glrl zXcK0mag07@r`4FJ_5#~^ls*OoAY&9XTsXR_+*gnR~|h@OAjsd=MYSC-7PPLjFU3J-?H` z! zdsRnOzo{;%uB%E_4^=uZi&rhL`d+QPI(YT;61|3bz2-H>YrNNFuW4R$y$ZZO_4?ZD zd#}x2ySxr~9rHTv^{3Z8uV-EgZ;iLf+uysccQ@}K@4ntq-miMcdXM!^^Pc5B-}@c! z_q{*${@VL{@6Fz~y#Dek^P;`g-bQaf?>gQc5JE(V7=(yNh+OYH@3+0*^Zvy9EAQ{T zH+diO{?+@8_a*OJ-hX+QdDA{NpISbRd|LQ)_UY-<+o!)ztj`#qG@pq+GkoUyEb@8R zXN}JWpPzkp`TXK@!sootRiDQ`{^53n4CSL@Ukb#rxFbvJd8Izl~2{i-@vouz(5Jxe`by+plS{i*tE^-lGE z^{?tv>MQCS>c7;F)oP7VkX|8Fj>81(NY*uem?^7R9pH^Q`7prfp6&jVspz+nz z)il<$(R9*8X@+Q=8kZ(bGf^{LGh6e%W`*WU&1%hN%{I+G%@NHXni9=@%~K7h_0gKO z4sAK^LcI!>?GTlKZ|4fI{~ zz4U$bk^13!r#?}iqQ9oQrF)<&)A4$>-lF%@x6*ge_tcB}0s0vIYx;QoRDG^~f&Oj% z2l`L+-{`;7@6jL9pU|JtU(?^xKhT%yjRu>cj-ipEt)a6a$k5yHsv*`e){tg+!!W}z z->}H=m0^uxli_E>e#0+@Q-FUKbGj>_%wIYmy+QBL2kM*Y+vvOM1^rcVOgGFnylGf$SYi0g zu-dTRu+MPBaMEzjP;9tucw~5PFdH4ldd4Qk_QtNp5M#J;q%qEzY)m&!HRc)@7~eLo zGOjcJXe=}yG!_|uH(oT}H$F8oCNGoO zbkFq6q%d2}{^kbeX6BCO?&eT)KXbf!tU1G+ZJuSGZ+^%8zWH18_vW9>JIsg8$INHV zm(9-%3ZswFVDvZEH8wN0F@_rZ83!9*F}jT7jG4yQjqe!WH-2pV()hh`vvG%UpYg2m zva!T?*Z9n+F!`7arpBh0rcS0Fraq=f(@@h$(*)BbQ;unl=`GVz(@N9lrfsI(rX!}~ zrVFM&Ot($}w7%H#WC4cQW@dZ!m2!?J^xOoiLp-T{Yb_m77?z#%wazGS@e^ zFt;;Dmu3Jhi4=qhBtt_1_ zJuTsu0hVEw*DUD>F#{pqMu?9PqR_I(@{8q!<)Y=9<&Ncn#mlO*+N`y#O{}e~ovl5s zG1gbD@z$}{EbANAS=Ra153QeCzqNjE{n@(9df0l*ddvEkwaiNUs(p>Ve!g{lJNS0< z6@B~q#`wPK8}B>T_p-Ivde{2Ms_<3$8hm|yoB6i!?dmJ|_VXR+`-<-<-)!IMzVm$F z^nKrVh3}WXt9^I)?(;43J?VSdx7hct?;~HW&1?&>)w8vX zYTjc$WIky=XTD~>g+;}@MQ5>C0xb=p89P`aErTs1Epe6W(*xcII+RYkdjj#@aW{kDIZq2dgSr=NDSyx)WvaYf2 zwC=b5YCUDWV!Z*)_}H3eooJnIoo!uYeb>6e`k8gJb(?jc^@#Pf^#U~GZL88(<7@Tx z_ig0c!ndPuci$-AA-+yumv5TyL}FykVPRn{QiWTWf8eh`oWmwY{Ug zmp#-z-0rj|+EeV=_UZO{_BZWc*uS;^VE@U!*M8XkoBgc4)c(-!wsQ`>!|JH*XyEw3 z{)zn?`*-%O_MP@a_FwJS?6>R>>}7V|p>|jtevbBzu8t5#xMQ&66-S&S$uZTD>sa7; z+wp?;QIbzc@}g&O2^6?l>Mh${j{On_nHjMt*JmI{O9r_4XU(m*AJ`m*tn^ zH^*)viG(}*@xI;?PKg| z_KEg|_9gZY?VsA$*f-dJw(qi^vY)qKxBqE>Y%jMf9U4b{M^i^TM;C|a=PSD_}H<~R!1PC70+t~s7!DZ7`S&d=c&=-0%rm0usfNWYir(zt8>F z`EB$o^xNZi&hLufEx*6~p8GNWYJa1DL;vRf9sIlbhxteN$N0bMpXvX)f3AO?|6>1T z{-5}N<-gT`r~e`UU;WSdU-7@?|CfIQ|7QN}{k!^y`uFo6?Ei{?3PMaph&K`91BCd= ze~14;|04gh{+Inr{O|g60X_ld07pQBfMx;h1G)wb3>X?PDj*?XLcpYeoPaq2%K}yg zd=;=J;KzW%fc*i#1QZ9{4tNysJU~@TTg$grK&>{lI@JDlXEvNGrkir_G7We$m%&(-r}(q{dG0Iv zBIB>T$+c6?^ZJS@;b$q6*m3kl_6GZ%@@>^XuR8o@W`#0{Kc=|BI{979PUb525g({r zp_tFTq0q7o_>URfG>Wl?rTk3pPsL8!r3m6a=OdNt`9l60|E7xf`dqP_euw>po2_i5 ze6D=JJC(uwUX0#-toVVSs64^l;lE-n=-Fpr%&!$+OQFIzLk{m!ZDf0~A1E#}7unJ5 z24*=sirdb&WY4k(6$(HY_b&G_vw_!hd+`^j2xlhqUvn*0&2)b;7kGbF6K1qxD6^F@ z@Fta=|B~;_7*z+@Af}L+$F*agv(fxHZXo|a@gcicv5UFNrZOLK^_5q-c)lxtUNKVf zOmSYZjz7kK$@(e7xftazuhGm5j4ux1ZK|c*C}l8Lpt{P>W}=yWbe8IdYASaS`IxK9 z_fjwxb`#T)?a6(?{)=nG`f^t=j?kkk6LzO^zxpsov6Hw~{AgwiaNMZ)QTa2!L)nr$p!kiS$8Th|vzyuXn1<{} zoSMJRY+^oT&MC0ohbd+)d|&XdKR1V4z;vhEv03~sHde)`cJR@v5z2D@hJsa0;ifUY z_}*UUlwDLiITyz&PAdeq5$EDZYvTDbwhW_6)0j2PE2`u4m;5o6MRkS$3nNb>6*PN{ z9mBlMUguA6XSpc$CVNHEmD$KnXJ>JdjGg=3`yo?@Z>i`4xthr7HD-PXtK|=|Da^O@ zMka{0DN&{9%=~^Pkgu=IV74=-c$)c%Gb-z-ntHhuMy?(+of*N+Q227+@bB`U@(#|6 z-ALbKAF|E(oy=G47JfUwn%%G5t~jCK*ct45>;N`ES(`6m8$wQBW$H42u!orM*y-F1 zzLcBKPXo`dv6C2owl^?3v%{~gzh4dNOp@3Ko3D(0?Yv2q!|j6cYRv;EZrK~ocV z6nDG^@Pk+jdxSm8?o_I@xfmZX2~e$7?&sEVPZXaiyL$bg7{%lA8k%W4|fM^F1>Q zvm0&LQlI_D;ZyO*Np4Q?^U&CuObZ_yM{Tz;PyN9%abQbz{^ls~C+kG=$}qymB?WRHfwiDO%E}5Pqg&sbVRU$SlQ7 zB6&)Cy+Iag1@{-Ec{znckgPFXx@GIh(-)?k>5;zcl_}ovN1gg}>yh$nXU=(M@?QLw z4&CzvmVa7@QdH}Z8demsBMB32RCpr)=3JA1SF*Bu;WPPL@D|p6WNmuv$gjN(7JGmO zFE6|}ynYx#dYGNB+H->RD%3;#p^R+Oz)dSjF!) z-;tR`p}v1^ljADx6(c==c;YGDCV!uhzYCp$?C&4mFU)_x=wsA>^Py^We+B=q;9q)P z?qB`i-M>m!8jzj4WZ$k%+Otb`?2`SuWVdbr);a`A`*g`JU9v})?9go~?an28bIH!! ziha4gs32))ZYbtz$==+4n7bVy?aqy+Vx;}K!>N&&>~A{efhSW_sOi*9 z%n;ART=ARKTbMas`ogZR}+{@H8sswY^_oY3#3R;OdZ6oHl zYti*FC7C<_-53x!o z_f^IY_y6j7x&P_q{->AwpZ=fS|AY;Q|M_`&{=v)h58N-$KadN_%kvLjo`3N2{DYV0 zAN-#_|6pHGMU%dIJD;3|N9Gi{)^{-wke@1l$1wg1FNRx{I2krFL=He;+NR1@!0=@U*dKLFdZ-#K>REP5Px3) zh~JHXZGgQ166Pd;gu4zPVIKiV_*?*qgIsPz;&}%^;#v+M@qGdyajpW8c)tgbxVHdE z{5t_8je`J^&M^Q<>kNRTcLhMwECG;o?*T~KWdM@?3;@AlHh|!f2OzkRduItgZvhBS zO8^9~_W=aA4*&$ej{pS6&j19^uK)zsZvh0~bpV3%1^~f(Gl1Z}6+rOc4j_5h4Iug0 z4hmxn6ST-lMYVGjeCo&C4%X_|`j1mcGCIgB2fr^4S+(t@?J& zy6-n^+`MJ$w(UE2@7;g!@GnKjPMkb_=G=u#SN^zuqvX#!ckexT^rY6mSZ#67VJ98^EW4wSYpv zCcr*`KjI4nK?w20FL6j2=;p!ibcFDZ!pwV zguMtj3$Wo^xWrI;{2s?Qdy}EkU{>N+4Y&&0-Ud7dC>FyGUUf)m`hVDXCs|iNN*0p&qdle95M}e#S#1JcGbfRV<8ub z;7x)|Q$4<0<6FRY>z&B^9?)n$O^wP&99Np2_70WG<1|-=&K>oK_iWU zKYXsuaVXN5G{r!SdkRh`xeG6DoHH(QoO4VTZUdtRPFPGY65_LywLd zMtnki60!VAw#4-lacS8E4Psd+TUMb)?$Ra>yJUx~sz~<{n>hKB3V1j~J`>2L3ivom zK9W<%5c6@5xlL>Gb&7o9`UP^g7(UNRpArh>^P=Z-eCk9go~xek3|A&`E+(I8xCRjB zTasD6(gXL3;0|Wo5|WvonoS%_|K^y4yI1PRM1~J*+q$(xlly=3l94n9SG|znkN@U2 zDfWfn&uVy)Ze$}Na~Oi52dlBENhvkboK@X*JT5((Tpj6oe|IHVlV}(G-3bJgIJW5T zPFX1xj*E%ogbduRg;>Z#JF)agiJ^Gv6>`rAbyyLaL9WBdbOnQYo(o}a*7Mx2L6z1M zUDEwpRd-(eTK|PhFdjA4{}kv`B3UPA5QI2MpJWrLa0(7T)syA zf9$;pm|R8K_FvOIfg}VnY!dbc!VXDKGBcToOJ{}nCPSM^!s0SLndu}$CNu3Ukf35C z5qSl%K@?=Ofhdb8EsG#)vxvxMiwMYz*dVWly=4)U?SJ1@&vUxEGjZ^nn7`k3eFJ^+ zJ9X}=da6#HI_K1><=k;tzuCMoZoc`)I4t$Wg>%fh9cOeNhefen%v^`nE*boTofovP zOq%tPMds&w*`-hHf^PjLy?3w{ig|dyx#o!j7B5+Vg+-3EYh(7C`wv_qiMZ*IBZMA0 zWTkodP!md;Q$zhJbK!O-++i*WVg0A1DU7oVl1k{e?QKH6=9-Yr5OeunCRDu={e7X% zqS*2c{{f=HiG6rPh>#xviF_@(cw_Rh>5hiJpj1`r4P4g-_Jt#9lKNEs^{3P|`Q0)-Ima zZ`L0KpE$fFPxzgqSP1SLJv(XscQjUhns?+8SS7jN{AkSL6f?=>#>gT!H;n0}0bCHy zt?1fs&aX4Ih}*n6$}OZmuh%>^hU;rq_y|#l1xoim%aqboa{D8l9lhr9El?-f zVq-2EYeGG!dImcNX4(ty?JfGS&|`AhGP|Z*zxl^rVN*B|5%idgwp`tXC7rQ8Hfm0D z_h>9FBcfMO+6K(!TXvYMc0^h23q*Hri3Oh5*d+_EIRFOCLhnK5)aRGq3GZ z-{fBej~&?H?>=>)J>7Qc;u|Izl++)OZpE73Sp76<9ve3g*(^En)HqySZc#3i-iN1p zRnpu(+AV_i{hh<6csQEDvvDK^r-4~%ilez=>>XpcI{YKJE{Zr9>M*a3wwKqMFF{>YI3Y(L+nk!2c2YL3}x_Ldzdd=_abm7GG zbH)|2GYq_?re*<(Wc%`@d3Y-rc?*-~mV0|)E1M+q?5?e5?QUq_=ds!q$&Qt+ys>f7 zc5~J^E`n|DAJ=ZyP3SeJ!k+Z4w8y65o^iTd@cMDH%ujc=t2CKA_o07Tv&sB&AAFsF z7bN61yS?3R@8C9{x7$a!%@i%a%5C8dL@|Dr$!xhQ_AejLYT(uJt%FN(8af6J zN7d0|mlDRpP*{0RxWjS#sqiIzYAYja&Pi1*epC_{LBrONHu3quqMvqN`$&@)=RtKOUbz*=Gu*+ z8qZU|IduYS7!=GK$J>kO`SA#xe$5}o%PN(B8t>KwwjtuC*}lrWIUWJt!~oNG*kJGE zHg`9-C2UcwP_^j^KBo?=8?r>4wmU5N14V_WDe5;j)Nw6NTqeu=P}0mRxF;sD>{mzJ zE@*2Wszc3%3;&6U@bU~jW?#13SGmpO%MmMtwcBD%X!G4|XYlI2eOqn|+v4!w7zfHJ zo>R9qZ^I?~HeABE^tZLHH*IUyZYPRsw>9rWk^YAb{++<*{o9&vY=^Mkbv}#E=WE-V z@2bz2wlx_jito{9`U7qYU&U7{Q#ys)+*-?aoBNt&Y#A%6)vLE--Ds{n05RMi4zP4{aX)~8@-_>JU4=UlYIv}xv)irn$)$%M*}hz=WMSU)1Q>fZ^u@dJZOvqVL0hmOx3_@1 zd24$tm1zFB6B7Oa4`X#~bIuN3-Q9eM!rKLIY^S1{4;IY+@ebw1v#;9$fj-8d3y*V~ z`6EMc>*u=C_{0vf(Bm1fBK;Ocx%0MgId=ArHpedB5pLfTw=$?(R5^~vzHgSpP9d1#V8(mJn&$w+9*#(m32lJ**W z{UgYYi?(!$`}Id`;(iCW!d*1Dh%N3--KiDr=H-vLJ5UK#aCUv!{cAfp_jlo*d7kcF zJzZF@?*}`f>I)uf`^}H>9NcCvdmXo#>$%N8$!+dW+-CpGK&0NYi`?}y1Lk~uQ%Es>g@>~9fNozL)97YZpSmm_i*RRziq>RcXUlF zUMP_3?xyu^-qhZ=24G@J@Ylv*TR4r|^yy;|8JB9lYv=f4TfKhsV3gLuRqdv*Gb)*9 zb~d2~^FKS+H<`aMoORaMRos@Y<~Db&<;M`tD7&OA*R?jc?4mWgy&2rOi#^ki?t(>l zTd`nZcQRNt*F3q4TY1nFQC+9kGqmh$V`^p&cH@--PPsSel>ZyI#kcJC9qaNQx1|pd z@sABYU|xf{YB#KM$+xpxcbjJ(-YuwfU)T+mE?;_Y z+ZBsfV`<(7lS8@5orQsCp%WMNy7fpO+cmj*z}$xe`R|NHe7SRRIP6}C%=^3Ahd}eQ z-Q2^WxeL0&c?vAbWvdcD`r*~t;`5Xc&Ue05sE4eLR#ckn7+~%(4HgC5@Y|WS%=E>dXnKyUG`r+l5 zk&ZRyCwt6g8^ZN_aCKtj44=Brjx6cI)55w49}*Y!+IvbaGRxc*!OEMw8=0pf?p?^d zx;t()i+b(T`mO)(?BUG)=AJM&cz$~W&p`QWnV3FX4zAe4+`I?U04HS0 zb=($j*Y9m==VKkuG*8A z%h&fb_w9**Z((3Oc!5>_+#X!Fr+F9$^SATh40GL{<_YYk?{K?!?P;FIZtgBxQ?lFa zy<=;RHb0BN#(S;3_jCW&2z~!`Pje~`6z+Gv(-Ct9b~6uCSNM%p|IYFg+-BEXm%rNW zo80D3-3r_MY1|gh;WqP~tzZ}4Mob~Xb?hID;0WAc;`goU2Uc|rRAFAF^-Zi^`^|Uu znzaINaqZ1+_kz9bgKC4@yJRmW#(KY-+uS{t|JMffjd5@(Vr#9u6H#Y@Tg%ec+lhQMmEUbH^`_nRB{#;Y3MsSoV# zPIe3gPm|`FNvSmrs~gN?lM&Dz^ql?`Jcrmyfd{U~_I9_yr%-^3IDqYUw&wOiZqpap z?Zw;{>^Ap(a_L%b^Vi$$4O=5P_r8T^S4rVD?m@NBe1MKVg&Qf%{G8k3Ep~e=x4AsM z+EhQik4yD)sN+j;#<{$U+XA*Gw1`*JnG@~Jv2qpPD<(2-WEfs}FP&(Y+%-R$2+MzG zqj`+JgEe^Xofs^u`ye#ACv6OW;5PS+HO2g8qSR$)?u++fR0wZPbl2N^@KCfOzDb|9 zulYWvy3PNIzUc71ea#Qxki)!-FnT?=`R8#E?<5H1k$t&x?-TpZZy)UGSYe*t*DlKY z+`ewj-5207{et!KBDd+6xh>gkuEZFYB~5xizFDC`;3>42EO1Sa=j=Dj!THGK+-vkz zd>#5QZVBf0{oI>RZh!yH=TKv(d`NHp;X2w_eZV;eYUO!EV#Bf!(IJA)mYr zg5X-dd@@gV`m5l+u)n`oLb%0K=qGbJx1|fat8hoExY2Ox*E7%3x})WU_war-G?-rXBh^Lb(y~%VjZ7=<4bV7-a5Vu zy2;X4k;q#uod(L=K<}~J`|S2X8){&-x#G|uJ?2{YC|JL@f*!SW7w8G=^C`P6(tmi# zqF(c-LlFD}BjsOLqGPy@e>fXEHoP zdp~q<+hgzAZTdADxE9;|gj{W5%UCR$ugQiA<1$<4YV)IG1iyg`f1OSPuJza9t!CMUZeoAebn; zuuWm>-1y9>M5M4qaeS$!GzLM|XUMcMl}Z&5dJ#J?$%=EJ4AO$o5Cf<-ACAQmiBt-5Kq?hWMPo3mwyuE4 z)1wR97RF@i3R`BzXGUkn6+(qAGT}I8nXRjfM(`IeAn;O6Je3b+LP*FKxv@FAj4JJv zsVj~xjm>OT8k^lJKQ=S2v_)x)?3OwFm)SBs8i|zukRqgp_QIT+y1G~z(|4sYNmn$B zROQ3S<^rroViK89Gy`9SPDufT#V{=3dBA_U+Vm*svpXiTdqr|M z6Q!+U=`9gcIJ-+}bP4h0!bQYes!b%APu8U-Rje(9bD`p>%qRpu3IW!XYD=MP7>10` zZ(ZCnvu(T>D&ah4;5Um{5l$$-ZKk#a%aI$oaJD9z4##;Q6M_MCkyv(AG?GPhS-9lF zvEctarViqNh4H1)>Do*Dt`5+?K^~dds>x6s1Id`vS9(CnA)tDIm6*C{k04Ga8P@N}*^hmW6XR zTntBxHAq<~70aW9q%s&upAO})1tzeKMH88tVhu7UjU*OE0gAkA@VToKKmN_ZPk8}& zS-8fuy?5!S(Qaq3B!TVoeLHxf@MGY$`0bh=ee+TA1V*8gGTf47BKTL;hnGC_Qo87 zd|}$jhk-Q@HQoq-%y^Y)X91JApy|*0B~vpIzc}V4P`xtskzFxPMD%3UXFRMm|3! zoc||zjxPQ|p1%oZp0|5>om`6oVR(;+JUzz&oVHl$%da~*@jkHIZ`s~LrghcdY)yDv2>XoT4ejLMEL{FxM z`IE*^^~%&IK7pnrT!*$yf>poD(<^uKApVdQK{@{j{B~Mb47&ic%pd2K`2xcHZwa4_ zrs@sKb`<{AHf7qzL5I(XU$WX(2T;8-^>s0f?-D)vgCXM5ylsJAnSRqVjQKoTh?x&$ z{Nw600Gax@F!hC*#(Y8aWNMht8T`o9D^s7CWz3gEPgZ>qHmY8k`q-zCZ=xrwUh{|H zD^s6>=6j+iUj<$ZJNT!56J8lsrr*MR%*Qp_rJbyLwV!b*Q=h;CKt%Lp)ocDxuS|We z#h6CXlU1Jpkf~RuzAkReOwp66VctdoWa^cvkD)(UtLVwpP@lq2^~%)epy^V3Jbl{B zA7$#Ji;Ouz^kfZRZK$>s_+>8-$!9>rduS2& z&F=~)e!B7JmMk=C51PWQJ*)h*AA|Iwd6d^F79KMDfveLV^U|)&^B9A^NBol44B>ZU z=QMS!F^`B}vZi-q`s`;=cZr^?`g;Imo)_{P&@g`z*J51XICz8zehZ*^Y2DKp>F(2v^M`6bhaiTFi4y)yM# zXzD~yR(;gdD^p*9W^d7xhtp%(DKlC0T511O3hk|!6Q>MNyh4J5_C#yc^g|AF~{sd#tMsMvQt3Kn^ zEy~o#QNjIE^kmh47B-Pvup$2%8hfqX9yX5)uLBo_(Obd1L`EH#t*Nzshq~7O28~{8 z?}4kYwH$0%h4)fkYh*S$S6^!p&o*VIr2ze}#4q`YA^gU}<#Z|2Z{#G{j%HWJOP&VS zc+c_}hwb?)dik%+aLlO~J1^moRj*}?`Ke5O2^u!{GG6i)b>(;izqMtXOTzS9Jl&W! z=;@cN`aH}aGcIN7vu7C7Eqb!*)gJ1Vsn2{9@8F^*p9$7HQNK~-F`0gq={J7?>TvN( zR(%#))hkn81f7-N=RUh%rmooL~?_=Hp(UVml1CVKtvb6`1jo;RVp9iZx3a#pu zsV_mZtLVw9&wF}h>T{RiIZgCr)yF)&vJD@aPiXkyW5LyVdmrvI45tMf^3~Ar8Z>u= z%^kw4!M_t;3w~8N10IET5bD=~8BQlR_(N3?T!TA6(`j9iUNEmm|Cu5G6U<=&ca|~o zMc`^XGw{!#X{R#N7{3N{Nr+!EH52hm1IW}XQ(ws8{Y&&@YN(Imr+Q`TIUzZ3OqGhg)NqrugARp-^i%Jdt% z8Ru90k~J>1r-csq@gJ+d#h9B^4_1BAvrU=$$gP<3L-gd~^qf@W1<{jLpY_65X82iX z-WNT2IDPDPj6*^D7tbAeIDHYCeML_mPM^L5(@lt;Je)p~$GH%z-d{kYHaq}kyaQgm3B=X#5f?9cCb&A@JOXFf_LyD|)i(N%ImlcFaNr{^3gMbVRo({nzR{}nx1^_oW7 zuS|P5@5&3JC#yd1*{@7J=W2OX?E$O4=;@WI=bSEYh@Px^wV~P`&i(Rt(UVo5@xoWO z_CJI=S?vd_UTt9b%G7hdnD9<=4T4pl^}<)Co^#2J6+L-4J?Edze#q1-Q=j@RexfImEm) zFM6_up9hc`zB2WNCvXl#Po{?X6T?sS$~OGpWBxJ?A3U5s4$ZxyC#yc;g|E!;bI?2@ zdh&4kx+jf!TI~U=KIMh4%<$9DtQS3bIDHA4*F;ZNecB6Onc=7Y2k$tdC#zmFMMT&ANwQTDMU|J{d)j1!zXt_6Tv?J`aC|_b1Cd&Zdm+QnUWRbLog)+ad)EEDTc`rpzR(+ipzB2Wt z_c0fy=*g-tggtwNsn3UM%rf@gM%Cw*JO>GGBw=<&=%Zo#G`Onv&W8nc(^$*SMlyHAlD zpozdg|6(350P{OqEL8a&&2LXT78NKHRfdK84g+XDNnCVeFB;BUD1Qmk`hBCwF+_<}o zo;;kM^XW!KPgZ@_3tySxbB^8Fq9?09=joNH=N!F9i=I53p7Z&3i=M3dj2FJLP48D~ z%v#ZN9$?k$b7Kn~YTb2Y^{3RB^HmR4eF-u$^~%(9u3$`+W6LL*nu++SrdrQ=gs&Gp zc{n}i9KK8Rbl%ejzCd%5(Id6?N)SR z+1u&KsxP`=ZTQO6bB^R4L{C<|)}IVtnfmA%HRce}lU1Mg!dIp~2h9x8lU1Mb^vcx7 zzFA`yi=M3di#Y*{My7;VTc7x2^Eo2`&GQ0au^*7{a_u!Y4lr zuFhM$P6ct1cihjlv3!2}TC+PiVna7(e~;@uKFs4e9v|s3f*rElejXaNzY|f^tvF`pGZS@lIvuS|XPe)Jy|Jz4cB zPp?dU7MelPlZVsSJ%INt(UXVMr=dAj^kmg1JbRRBPZ63kMNd|}-XmJzpiF(~LEL{u zPgZ@@3tyS~$U`+|o#@G`&v<%e>T}R=7BiMT@*UvnvRCr_D${TF;Tp5;0nRU3S=K94pL!haA)+U%J{2nKm8mcOzQ!CTda~+cTa@+6)JKXa ztD+~XKI)}cnff?1OGHmrecID2Q(u6lQ}krj4|;m?05lQ&%fB>uzfq|39}JuSCgVLO zfja6O;WYRHPk)uicX<4;$3>4{^EiB9Io=&TKEUHfk7FLs_xLD}lO7Lx{0)zp51riL z&%eKa7n)AzY%T#;*OT#QYRve9TzMn!4X!S$$U2+PEeKzEsJMFISL0d(u8u2#@c$xl zk^eD7Tsbc;WuEuCXKT#dgPomZCY9y9;OUjAFGBNK(UVngymGE=_0QFqUe$wD9|@P! zu1vjIkN17ilT}{?kXx`(w&6ctW4@)~gH^Bf67|Z|mtLqbmx`XO`WS#ry)yODmr&=3 zo=gq%M>W;@)XQiK5p5;^z=3$1fnho@?qMcdwVAV&x{8wi9*}vA9 zKZ%~K`qiFZS+B}hl=YF_|>@94-uEy zHe{Ahc5#uv46cqV;-yQO`4EBrQSnPw+qAqf-;}A3Zyz#$5j|P;883Wg>Wk34FM9H> z(Xws*9&0!yRGMVQtITi;JBQ5u&@(^D)J()Lh98-FW$Np837Ka^PgZ@}tD}^u&+LwQ z`OsmF;gctWtMib7FdW9EZ2j&LGGA4{;IoJDoALZA({CgaGJh1mWCqQ2MYb--rA&S7 zP-vz&J1vX8r?#vo?* zGv%dA*`{l1$c&rn?2LdlUB7{Uatk)fLzVdm{HksHgR5;b4Iy)`gipQ(thT-7vBsMN zXuRZ4HW(9;v>fU2=RNN8_!N)N@t9!_W&aPMQTwj}(|*5><$6_XSrOdqLdR1Q*zhr8tuLF>&SEfGF95UY$J((KnQ{MeTnR>2?b&=@Fs!zZVnc*u_ z&vmn|6g_!3J=fQ|LG)zRr@io%89vwK%8Qh zOm9k<;YU6ZGOvoBObzq1h##4HW$Mi*L*^aPlU1Md^vcxdpxM3&VG65W)5!3ZsgJ}$ z=3vp2RiE(AuQK)NnIY38da~*Z05Zc@ranG9WafyTObyc;1(2y%w&BkSna^wZVAVhA z*+cG!CIbKb`myE5~t^eNn@#4lO( zdOb34m8nlGz&dpr7g+UqFMMU{Bk_Onm_t(i+i|RiF3X@s+91EXT8-=*g-tde0%s)TdU4%vqu* ztN!HC<@_OE1Wg3_z`q}Qd>xqg{rvM`^Go3(_(4zeJCC3Cm~jntFZ&BLTK-=LSKrIb z0P=9UD`Vs|xVrqu5jMkb!A6g%)^kmhiz3WAp`pBA)c~A6Y)z<;Yv`3lx=!qdS;iE3?WNK)SYO3|IFNVxC(UVo5 zgY$_&2<&8I|9R=x4;SGIZ#6kn-&uPueb$fo+q8TG*N*tjgVi=I z4@`?P^|{kS=5mb-tokhCBU7(Tef*4&xlQzB)ki$NGW98F3Zf?ur_Vt1l<3LB>2uJ$ zsP=pM96Zu5?N_Ef2~3Fef#}K9u&ieBQ@t|v=361N!^hmYAgey=>6NLELbIRf$*NBS z$h1e9`dlVtri-3T4eg10;VWBv&I+0NY7bcTTK*Znvekb(WIm^QuwC%zLhXNsPz`lX(pd>J&X!!s|0t!Aj}$e-8Z zr_l2{^55MG2!HR7yK_gL3a-A65?;K@v@`nMkol7MC99ovo?e;y7&K>#o~-(ar&qT5 z0L>3XpYZgb@bt<_ls)oIUqb%?S}%lD8L@f!nc zTB3-H+=7iV^(kn6AbPUuBc5KF`V2I;h@PzatfyC|K6-x0JT7{&>h-#&J<8Mb0CxuS|XBqL3N$Ntd@|)vFEED^nl)KHhUhPgZ@*l=D-W z`ZP4nq9?0f!>kTJdI{ER7Cl+@8YcD13_k_Ua?z7jzp?Nmmxatpq9?0f!>kTJ0nIt0 zC#!yA;n)2jWPT)ivg$V$ejJ)RMNd|J9zdo&%1m$FnPP!>kC)leMI!+ z;q;lS@IE4X@^Je2)wl<#{b1D>yytCY+8?NC)UX2`Yw zA@l`kb{0KZ!_Rr=OPS%Pe;qOhiJq+bw0FLgsW*>=%weJ@tG?jbuS|Ubnt7rptNsSh z9_69#JO2DmpF=p+_npk+A@i_=PyQ2lEo|YR##J0s&Rb>LmU<>+4w>olmaO`O_-%oM zvP}y#G0}73o8k1)XG3PO=*gsXOntf(GB1mstojImOxu*H&;B)J%q*9;WNH|G6hNk4 znfk(OAyX%MGBwoKZ&%incZbG)D}OO;_7hHk8-+9Axx!g+TsZPl*c_|;a@Zun5rogb z6Fg3fCX2~1GoJfp;$DRNk3DzVIaIm51DZ}7I_3=lSC`wmQDO7Z*)D&`aqwEvYue-3 zCo`{>ad=Y#T4 z=gXhBZL7H(raiMq*nAQ0Ogs5>aCO=fIL3IHc4gXD+B0l^D}Kq;OvEo!Th=R6pPm>t ze-=Gi^~b^wncbMN56ZNZX{eCiR zQtB5>4f8g-MOm**eSA*Xd{y*h)#t)xy)yM?Uf7%~da~+^0CEd9%G4J>h5AACWNK(n zzZX9Fc4&Bx>fQ;PUkOLSe-NGxrr)8?-Sg0N;u!y42UlOGiI%WgHqYfJ`ODzy{H%jt zhEMyIX@3g(`@}Dq8rrX#YJD1---({A`ZWBIsaIzB=E$&lQS@Zh$349=^>JuE5ItG- z2~V#~eGZxlpK@s@tNxBLWqXu0Zzn>p`Pt?1@nGid@!oZjItFtoOZenhz}0zM@N842 zZLwp+<`e(rY$K~}X-}_AeIA-mi=M3dIsmx^8)fPXp9z~b(UYm+xy$3HdS&V}pADN6 zL{CWiNXn{SAotopPUzB2WR&!Y|zJ^3o|26+V?!)d{$AWXl}MA-a8{F13* zTJYK&=*e5pm%0wu%TC}3-1xVj$MieYxo&`_)2cD&40wZcjd-twJL|v{_%?90{WxRE%_`B8 zsrhI2#GpA@^kmhet49z%`P-kk?{v=k0&F{r8nc*{k^m=Dp%G5_!h0PnHC#yaSAXBeQ zeW3@}THK|JObx^T4S-C&@=*D90Q_pc9R{w>w_FO(*b+YZ=iusmV|*Hy@=$S&|8zO7 zUBK0G6%qbPaG!|4$Qf{TTtzP~W#&Wv3t{uL_$AXG+M;EZ`JhaF6b~YAik__c2!Kqz zGWGF+uo<_|*+!EP;oGlOCC zvcyGxZ-}_^@T+zzTRWkj*Xq)h2Wz@i!+cPtK7D-H94&gX>NV}uD^p*B<~Y%lRiE+f zQMTcq5H=@j_+ZuNJiRjY(bXs?q9?2Vuby6csJy)del>5e1Xt&6bWPZdUF7nIybHMc zJgPlRyE1JnLZ1}BWVP*T&o6NLk z`*PSkDSEQ%W1e1_`ZzQt(UVml_4LZrr=bZiad|~neZtc#Q(uH;g6PSr&v<%e>Qg6$ z%^{*EtG?*zm970>L46|nI9T-wPp?dU4w|{5C#yc~>6NL+!bql7^yK06IcSz^_@4ei zc%qoisLOuXoUB(LDbDgry zleK8i5x-m!n|4mbFM*%htW15~*YNx=da~-%o?e;y3^d;tJz4b&N0-AV{|p+NC;ucL zegTchCq?Zeh-!`5R%*jro``=e_)cFz2-VlQ8G2TrbSIC|?%lJd>}f<^h~X zVa^ZvuCSf^@iQ(T;tyfYaAD5hxV13nW86iUb1m*C%y|@>ggHmzOkvJ{_-SFzZMamJ z^A`3Cb56pqspe74WvUwR4}>{S;B~^B1Mqfr|2^hr7mkB}C(L>Io>9${#=I!Z`Sjit z=3IH4gr4V}^WbeI%sKA16OKG(%wEEro9<9y&O6sE%sJ&gAAGwyRPA2?sr-ol)VsacrwCe0Q$yVjVv>cO8Cj(}GPN5KQaoOg(8RM>n5 zpCOz9pC_CHuM;kSbHXL?ZNi+N=YC<%z4N#*=hb;mm~-H~EzJ3CcKE!Dm-De4BFuS9 zW(afcktM>37R*7R?wB*=tLlCX>=fo)AJ+=UP|@Bm%sD##Ak6tUxJCuj%eggb+Z=P= zj0wV=6XOtJ&UZ0em~&Yit9(k0SuV^uC*7&B`~_n1#X|-`y$9vD^K^9E<%GVUDvtU6^C2 z&ll$S=qrUe_W3$tj%&VEm}8dj5$1U02ZcG-_z7W-BYswxV}xH3=J?@%FkhbDq)UEJYU_PuQ5Ls=2*g8 zggH*|K4Fdld{p_B8dFrp*u7VTIWF&gVUAO)Tk6unF;@Esb39Z`m}8DsD(?|8UsQbr zV=;s|PUIS4j{CS%HO(ROYhjMp_#a`8#rTUb$6354%rO-233I$dU5D5f!}u&=_G3R# znEle5)g67#7pOjte*VJj`@Kq-{jR?v%s$d*s0RI?&lP50-*v+5$9ugn`{@2s*q{&I zqr&X_^qesJTD&dHehz#X<2B1Z0NV)joAvI({5CyRnBSKV7v{I)V}wr7@vV`xhZC8a!rw-aU?<3wS$A2tcIZE&tI z+x?CeW}9A*a15LlW;@uogwuFW|A8>yC4VN&_r3>&`Cju|VLop^Bg|*%zmaP(7xg(< zGh&(J*muHa2jTm``v{NwZrDr_J_0;LxEmZ7J`LO^d2p<8yM>q}st?+~3XN7CC_!c018rXEXv|J4yFMJbt z58?ITLxo3Qf_Eqs~bzFv6rWnpu- z@HyZ|gdYSyqndTN_JxlCe<1u>@HWS}blnQxUAPE7M7ZGxVRM-93h<|d)8J!-F9fd; zz8-vnaP)^^bE@#s;O_`$!Rv(Y0beKlHux^#(U+qh6K)0y<7o z*MoNxZoVRH4i-*;KPvns@I2uR_-NsE;N`+MfsYriy%Oyb!p-1wgpUAUCOiPXR(Kuw zPT_mN1>yDJKML=56~2=SuLi#-{3v)_w@ZupQP}J%d;s_$;RJZP@Oj`PgdYSSC0qnA z6E1-Vh3l>ko3+C8!QU2M2fkGJCh$*%9|Y%xKlbCW`L*x>_-Ww`_+{aH!0!sb1m0?u zOUrIQK^v*?Z191?i@?poUjiR4d>(j-@Dt#q@NU(3v#|NQFxT%J-6P?HKO&sC9d&{**C5+p zm}`(t73LaAbA`D^(r1OaM$+-ZTqEfWVXl#MfiUMnStrc#)He!qjMW3e9Ai}wX21QX zg<~&<&0mDsH|%e!0dLvs(!#!B+X}O9*sjViqhFb7Ucs}0F#CPQgxQDcQ^M?HbF?t~ za&!o@FUJYO?8|YA>cQVsejoQEVYUH&U){k!A&=pAu3B@GFz2HD1$ir+>oDf}7EXX4 zQ^q{uPbp)b@aL2KdYKQV$FBuXN*}b90#99M%s%Hpq>|Z_RYIYm~&`c zE1E3w|uXbH0)F!W@V4jxgtj8r$#e=e#|;3v*tbs4(XqnWgUVyF{4%A-lK|hkPyw7s1a8KLvhW*dYH$54gAvK=={i zL%_{so@?a8r-V6P^)sTG2+b!ph+$b6O9C;Xh!^Ayu0NUlqu=76H z^N{cp;6I9f0`mN?!m(%YE;H!Dse}9WWaQ5dh<9%??BrP824RjPo};`tWLkx}e&tf( zD9UY*asqu4gxOc;Ofqb{e!p6Cq3}K69|_+IzDf8&@V#WDF^_uk_reC{|3%Rhkgk6S zKMEdqyx4pU?jyn+7k{X5aUZmY3&#>@vlr&tqiw<*OE@UZv2Ujda~#GCR3v;gNxG?8N?h?-Kjd|^a z`EBU?s`(n;cZ5rq;1yn&YdAh9%=I7N6wYVy-DHikfqfdcQ%0RLQJ8Z?Hwkn8=Xt{H z=k{6ULoq*(Fvqc;CCqg*FIN6y$lRffv9ym0b6oJN!W{Fv4f2cUh2wem66QGQ>B?yH zIZ~K?+m;G*9_-b^Ii&q$VfL^4mN4gwzEqg=ir+2F@34=Mc`X<4-XR?O4c>W0!+vq2 zzvyh^7=hh|+5f*@m}3p*2*=@XfiTxuPN?Qs%%>{Mb*oPz<9VPC&j4o%m+)+Gk#HXT zBhlx!H|AzxeiQ$NFu#*Nt{U7QUr>hoTf&7M@O|e?&VKfz-dmV!Ro9bIC#=Wy`w8I^ z_*24ffENqD1Wu57?R*mB6off9$bSoS9*^$`bB>N5laaSE)FD3;_X66d?-u5G)yGti z>wUd&9M|SM!W_dp_RB6_jtALOI0g5E$*})X)K{MrehR!uxBy-u`~>*RWZ2L4_|t^B z9`yO@J_l`s!tA4-7iQo10vU0=i+m^wzYTsxIE(P#6}|#I?j)zb8oY<_I`AYi>iG$% z=RZki*+c$(S~NLm+Jy7q9^sq7UlhI%{NH4xg?-n*Cmg%G#{57uk*T%j8e!8^Yi?Kf z`dV|J@`1JH5#>YioT+}kd9Hjj*31%4-G%Qs>V7-c-xQ9*{g=XA+wpN>uABLyuw5ThHPCOJcJ}1Jy9;w& z%X(q1Svgyn>r1u@bM4M$!t7(*C(N;XC#xRg1kV!Yn8z!GIes%Q%(04(3v=A%tE#yQ z^LGhzEa5gMJ3HCGdLkM1z#FIs>cu^eyqYbX`W(KI2`8ZM6Xsg0rz_uR%z46`&-q&6 zG{X6XaDE!@3&Obrjd@nM?jZCz7fyV_VDU3&TNIk@gi{|iW>4V+o^ztY#g7~FapCO8 zjQNys^f0WcB%DY1U8-*~=6K-(;yO*Z1UoMij@^Q9*}|Or`f=4DT_s`8KRo6XIoHta zF3kC&8-+PP^8#V6liMlG@wtP-9BX{Kuw92&nBxks7v|XKdxbfk?r~v`#al0I$72d} zyl~xGXB)>RA0o_guQP=?hW8lZIKoK@bL{G=!W@Ttk#Gi@>s62P`H(QjRu_di7Viz! z-;DWczUFM;n8)3O**`xj%>H|`h1pl|Gs5f#*sGc^pdCz@eHYIY<~qVxtNWU;xmB2b z$sQ!5Jf~5fpA@b|UGY2_^=A=v*WX3YInA~{)!E5@dbeVfKYPQkebj z+Q^72kGKZOqws!xH=cWye~IT_Ve>Bft_!EZKLXdd?jz>s9^d8hgC0NW@p_N{;qlgA zFNZn7y!C12bnWHw zG><>w@lVm7aV>t=;decLH{ka({BFYU=lI=>-!1svir;Pc-HzWK_~r4t6TiFgyBoiI z@cRXR_u}_U{O-f=SNPqJ-vjtPh~Go_;V*_?`ak7&qqFHh#vaX=&3RrTX7b|xWMBW} z{_ftvmC2sTslMLhk{tv6lUrxcZ|hpszC1ZOxq2Yk*VEoTxw~uW3CX3YL!*qz&b+mU|7iQC3W`#Sxx@(|(cx7uxdk?Z~ZdW(F%~?Ir=dOz`oTAN` zb2d6H%JW*1C*ZW=B=(Iw>o!?JSb(dG?}%%}NpdN)9iM8}%VC~Nd*_V4WV^dS=yG^+ zVBz62EB23Bykv$rv?d4U9eG4=@5+ADHoJFWa#efEv`IiBS)A%b^&mSlQmJH5XAoL< zGB|>~_ri61qQg#w2{=Kft9NsjlHN%{89|wzHP}DUyJ}wVCMYCKMcbTJT?4J{t5V&` zPMc2dyE_Fke&naxp6iWPgnnc*8t`Y@T>9dJ1By7ygE+6weNnQ#ue0|AT)gzUFxijG z-5I_~O`SA(aGR8ptd=yQ@wpbhDjPc$4Y-FWR(s!pulx*dr!xj z;4B2rfvCHE&1SvZy7;7OcNgeGxGD|62m-d9cUjI#C+Q2UvsNTKRsi+84tJvpw=_HH?!X9=4{LlT>+V8_M#e#h zdA;SQTR5Rq=-nLQxjdI}_|&ujj|ouW&=K~6akjb)u}5$t$AvSqy{8k0Rvz26{KWR< zfW|V+x%qD@_`lBTvQ^w`pd2h zlc{9;z>%o$lT}BkIkJzhW4PV2>11hgptbA7q~Xi_W~?1-bXv#TTa{LDBfb_SC9YWk zwJqP6dsiKq8on_ISnORMrw|dhui|CFTc;RMuAZqxF`kR8M4jKi!2wtMyOMx| zo8aZeUQt!&pH{dypFVR<%FEDgrh7Wb}U<9C7hRK$VS^{VA`dvOmRUO2)%- zy}G$+R(!E7A|or&h}79G4+0u$=O$>?`7jA$JWSA{zV@E}Wxai?j>OZ}zRfZegq-nM17VQq?O>q#a%`^&qnU2JGr;@aI9 zy>mFC+96PMZ6JY*Q_t`1O-(@%-X4q%e8Tv0sDUed2hLz|Zw_2R>QWm;*KE*wVb(Xf-Qb*7 z9Br;RD0}6yS8=qysjJej>`KVZvRhUDoR_MK%Xh4ftxD=b4IaTq+E(ykZcIUBJY%d) zx;h4W`=TR1TS35RNDjh9r4ukJo`9!%jCw9`Z}b?|W8gl`W7Hvm`*e@%QQrjz>iwAO z{iy2^H!i>Vt%FPLd*0z_HtXTD?#%ANH;etr;($ z^LjdytLO3cxjz}yy)M9wAGfazPBe3{r?We0r3?6pf|khZxU~U~o6d2AI7a;N5S$=+ z)0^AgKQO;{`IOdf`EWL$F0Ey!S-q>4q7kOEbwztmPj3&ttM%bSrP_?lXhm~LbuQo~ zp{sMSz1zOu;dP0@X-lOITX%v})o%t<{ru|C)w6uFR9aqiya*P%*pmyFFP)F%#@o9_ z+Nh1|(2HXeT-DOFqL$8F-WOQvo8P{nE2KlX&gk>fS`h+2ylfZ>vZk@AvFz?X68Ra{ z=A0@l3sjy3foub}N}I}lD=iA#E9^OD@Oa1;^}-_4raQ2uyn`cXM)3}LdyKh!j7r8? z;eyyq8@?HKud&zig2C>AF6<2D=KS*glTUOg<*Nd*I_i1sL#-mO%bK@R7qF#)M_h7M zhxb#29!SLZP-fBZhVEt4JPXPtRi7Y6T+p@1FT)KpXVW|yRmX+flSbv892=J> z-E2=#)o~7;75158#OI|tE@Z{x4J$wQ{Nf!5F4f8--nG8LfhsRUWVrRhdTkR_kHeNX z#>0%o-PX48jQFDxYItXRTW4=iauTW!1if+zY9L387xf+8f-&k zvS;MoO+L)?ALC(G;1Q%7o!5@&LKgzuBSzYwjHq1-+U5n1MQrl$cJX>19P-`mn``-y z-9_oBZ(7ZFUPpN512nI8|2C{f?YzhfY&KJ2T`h@M`#Be_w62%Xh_4=eD?kz_<0A_G z>5}&HIXxZ0yE_^H``R1$T!Wg~?$kH=d+xnmT-fK!T8s~Lwx<%^(YDar*L7lV&p>;( z+edLh_|iv7KU8_I`Q=ynat_*}wZZvi$t#~5t10i=OoyNxh`Jzww4~f1;W1%ut zeup7$wwq88*#_ytN!kQ&@EOesd+!{v1?|#j znU@_xcHipD@3e4o9WccSuZ<~u_;G!VKh?W*6J$Zq@zAArq~CrKN_Eeg6VPAO^{jD; zL>~v~%4OQopLDj-<1RXBLZyN3YIEkIH(_~qE}ENB6EO+AAj`Y+@X}M^Am89T1s=$k z+0U(;vDit3JQG!4N4iFSfd;9m{yN;X(T}}25_}Ed!^ZF* zl1E&ve8?-lJi3TOfckKeuy5`rC}c89s;!mz---bxYx4Gk$Qrt$WE7=Ymr zUWZqlIHy50=(6gn2smor)*1Lxg`Su**9@S?a`d#$~$|w+Q8m@54~<8ncbYzf2C>aThffYqVn8~|F*u0Q=8m9P zSx48ga?Prxz4&O!mzs8z>dkmR2%?lzIZsT$RRdE;Tvr6a;~XMGH1w7e@%YI?Ug2t8 z7WKBAXkC$2wpDKN64$pM-r>Ygy?VGcxqMX;LqPnH?VF(7do{L&y|^5c;;6wk1fiK@v+3C0Go{?M^OJRu0#_SNO6qjEmM)ip@C7)9tBB%D(UJsi*zbu(T98Y8a&K8nYk z1@1+1#AiiA#|7X8KCgdC7e_VFX+d&TZ{M1uY?Fp7ES?Z=t+wSng~u2SF~cX!;F)K> zePHpl9CExtkj?@5jyIk8(tDiUWGl^a#W`@Ul$U#}O4hhiUUsgOBlMvIAIg-VV{CQM zzPN0!i>W&1AjaTug#otF5Y6@&S7S4LW;X_tZlcyUdF|!rB|H`KWN<7%&tR&2)&|NW zV@zH5KKznH{i0sip;&7huM9XRWXRDKSrDADO6OVVB2uAq z_cK)f96Tvc$6n}iV6)X#czVYmL%B7v_IEYDJgklQ+H}FYThoH}l}SDl1|NY?htW;G zlklsGtFh^5Zw~tH$Q$9#XU0W+$?op1{)#5@k!P6q9m|VPZc^w6j7Mx4W$$d$*E==C z-fU(kJ8UBnI{N6xsg*Ok+WQx@5A=1RIT7xtL%x6>M12@a}FCH7dv7LKV%NsA&pW%=DVBqrWjO~#It94 zwB#y2E8)9kFFRuKJqv>caUr|0Wc}zf$~@cz7xbjbEBpp&`|8WMFffrZpay0Gg?+)Z zjqMBC`|*D1Qf*yZdPQ!_t>lM2!i%`MVN&C?W^{~Q$#BprV289#YMjcRvnb*C{?*tR zZM1{hkO7I9fWJfPW9vkF~YBNZY1htv$Qqn`UE3@I=Ro#kr;7rk$GZmH^|z7+qL=f+_8yLb=PoCT zv3vgKyno-h^kdPw&{kLW!`;YlnC^7?vB>!>N8;|5%k0O85r0JfC&gA{U^0VNxTLnG zZ;Dc@F(8Svdoc}HXBS$8P;hazqw<&i#rU>X>7t6+z1pEmU39@)_R3%T#$**v)rb2+s4Z<4D}W5Bs!$ZRRK4V#Cs_IkAYJ2Ax-M<=pPUeixC;%f&rioCZL1SDqq$ukM?L3MwBqg9pmC zl`RZKZeDG8qrpw<-&p3WB9h`U-+hwQo}S50?`F6u3Qbk4r~&vsz!^MJ11oU87%^VS zy;$WWI=eh~JdZELofxAv-CKr#Bl|aITSYX?v`@3$`QLU+MoRoiP&b?alM@!Yv1CKc z>}aPmv|lgy$-oT~`#+s}@jqc|L|%}1T|;@%YjcRn!q90A#X{%6@+VlbvsPg;M-1lJ z=qyle!_Lp70SqxE5el<(s3!HRRL3aIIfrur91-O4y&;rgIJ;bzbQc6`wt%p z{_mXvBsiUJ7(&p2%k2iewR;_gizj^E z!=)$25Zz)o)(e)eaQ{kAPU+C%mJX=y{NxT+cA?Ss9lVTsomjjM5*zKLu|Y2icKG!? z+A9ZlId}53;0NzFws{@-iHBLf(jcMLpB!CQ%li(SEdQl%gcTpc{_`8VE1Q75RwTbs z2${4&3j;qZRXXbH`GAr%l6bNafw;h6=yaIoVP9==7--;)Z75jE2UF zBs5NK_Wd^2H{hWw2&%EZB7yi&>?gl5T5+^t%5*=XDGgKn6iu00kvUVRRQjDd9al*Z z@6;)b$j-;?{y}DN54Q0iU)sW$e_3 zip!>qziXhVhHX7DUE(m zQyVH%)ExDb-xRILx~3_Wr9E0v#nd-d>^9U_l*xu@qo2UW`lz3TDbx9m9;9f>^a?Xj z_AC5Oo9-t86_9W9l;(QBFf<}!FJxRAe!PvlqvO7 z{K7va+FX&qXhq2N(<`o&DbWg>>zgY|d;Rpv^fp%RHdkEx$PM4fDbp%$FjJZu{mhv% zt;xU2rcA52V5d}`{V7wXRwQsrL&a`oO*o~o;+`>OdSivSx#B)IrSe`iwSKB^)zoN% ze>qQ$Hv2~ra>cH_G=g=n(8FoyRh@?HeL7rUwzif3WQ~V^zKj5y^ftpZsmW5CLTMan^pumi7j!NtQGJ1yfT9dyYJx{)H!Y-dB;!SG+{ndbMpss1EV z)zI&r7`TE%+sdGE3FZW28$Zm*#$a|Q&zH=&6S#c1F_Ig8l^?46igqgCll&&=iJ-yp z!C8A{RDX$JWBEo0qz2E;`dMou->U-MKmSUGZ<=my0dJT#H@}MJkNLC)%NT6j5=2cePUO}g1Q}Bv^Fw? zs$x!;Ax2gC79!kgBg;;Kop5rWH7kPlM`wwRRej^dwcL7bvk#$ZYj>AAu*6jaPKWYo zftO%>ESNQcKTnl7xnUX_Bt;eTUFnN?#i+A?bqKZ{M_6I0J!!smL9>65I&qQNuVJly zjTJ-DBdxrSp*_2Hg4SSI@|=o=4k0MdpkzZR@9Jbh+eoF03qmAi|GJ2UsDt%^AguTd?gA@+IuDA6jVIW1xu+$?KPLG&uWHl?!kt$! zR)mI>+Z=5O!TXTh(En z-f&WN(xxfKCVm;HvsfJ5_)_K8^(SMR^qd zzci*k7)!531qILDugd}Yhd$h}e%lCcCoZsd^0M?&C*fPyiaG>c-EDW3;ES+3gTWF? zmHp+}KgyeJn_2Zw=QXFm-a^Vr9DWL#`5Sh%|8V0N5!+CMAT=$vA4KrjX47e%@m?X}ll zd+oi~UVEP;m3`M5AnD8_Y5Bz^W>*Wa66$)$QUsuC06y@?U%!Nxzii55@hDB=h{d`t z8;^(ebGOH8!1@*_{z}dHFVpZnFqKZ+YY_oXb1?@B0M^3@T`w4*1kcptsf48G5s;(% z-C5o!L?)h7sG;w>Bqn81QTI48QTI5xO3K({Jw&bl;qMO8)hIFfc2UW?GT0@klkX4` z!abiF?eP$4{Np_wr^JZ-!LOkta#%~7L^!@=IR9pAqKUkUL`YC3zWPf}vz9P?5OX#Y zk|h4DF*WLf?+f#Ut|y2u^gywAzL>0P`Q(g=1am|D77mZTzys(Pj_-PDJn3pYKe3^{ z_@T?};vq4TiD15@%T;uTyay^`))H3R!r$|YSQG{rSW^*-B2VI4e@=R~xq?!4&#&lIKR+$-4oqz1+0E?k;ILEz?`EM zw^`%?42i_YzB#dIkR)0K)=C;JRuUFv7yQ&6C1a*M|EmN^kwWhfuQ@3JQx$aZ@r1Z7 zO#J%<1iCA(JCLsUBp4U|&S28>C8DmR2yq*MW55>&iLE2y^snE!uy!0t8O7Ta$q_wY zuju*EhgAbHwLr~^IPX!FB%orCmKeZRiA1c$06n88bb~K)Cm5+)=C0w`Gr9*1^iFq9 ziRVvxI>w5!OdY!6(DlBIl?kkzcsPXGd!Y-n7NGcj7~XN+-l`;Y&mTRb=V9P$#5$j~4DfDUH*AG&sm6E?gR2lM9Y89qEwQ(gV=Qakq`XP(dA=Sihz#rVLQz-&CS6$zJ@s zNP&wKxJZGE6u3x%ixjv>fr}KlNP+)PD6sR)m*>)LHYpXg^}_#5{9gi3z?Q}9zY4#z zQ*2n`k9AHM%cHvgjJ97e44Aew{3n!rdU-ZFM}s z`k`%!|KXX5sGj&e^ppk1%0Xc%k=tg=u;5Xf=}*9`o;rEjbiN$#39rL~7Y9ONkfrPI zJp8=ay3iYk;_p0oa|M2$AB*%3ghh-9cY}?nYT6LtHR||ZPk813Axh_u5;-VL^#7qh z?ARWkg}q00&Er#^K&GDXrkVoYSqrIn_=n+5o?6Y{WEVNkgLg~-TH+PyQxUd6Ul3#$ z-#L`AN>Y|Mzm;2Y@vvZ5&Tj;_i|-zJqKj(O&I`lKwZPc`FBvc5kDPcK-0JGbr&Z77 z@6KS4IpaKdxfVVaIyMUTgg2lYylKDqSMUlgcp<9{g_Ge?JFn>muP2}MXzzVuRE6RU zhVZ}U6MWR;7hM(fq+e)^fH&I8Lg8fmx=IQkv=4Ziy6dkeyxg$@-h)5s%9D&=@))KZ zG%lbfr}KlNP&wKxJZHj|4^VxW&cpdE8~=RH#s7w1SH4yV(hsx!Zn^kX{TDnVqj*`q7xo&pK&00(e3ef0f>{H$Up_^^;unzNQ z|BkxZR%hT#-|ecA_QhbkZMbefqy|F1OrDQ@>}DroZB(;A3t-qmz3M~r{-LSyV%Mqq z{MJY#Q3Wls$tx#rQN5cfQcZ27)<#o`LaMeU=jX};%0%TsrF!CK)fk*RCDo=Hcm53+ zt@TnvjDC5DGV>=<{NO($9?5Gc`6iM47x>NIBKg-M`9(^;StPHdhNeDuX~we)fOJJt;r?H@GT$Uk&W`P1l~vu=z&nLo@Z^Sqf`adWYoT+emllL$jUe z$!Aya!0;R=AU*pM0@|T-4k=XHDK9oCbQqy+r6=UY3n(Mo;Xp?|HNfV(LVqfkDxHdG zeMTPDI}u(s*Un~U1Wwk-Gu+U-5B zm5s=8FmJJ&%~d_pIhWLelw8D=AZD~%_oMQ2nf?ql)fobqd^dY^0{Do{9Te@OJ3n9* zIg}q%A`+z+ZEKgPPVblueWqRO>?=RL8HgCeMYH;#S*mxN>YZESVx4G3*zFxr=waL8 z-R&+NQ?AI*ZE|~mUhI-rzOR;!Q03>sj@(`D(u&bY2`Ra)3i|OC#DyKkFc8lK@f^KC zyiRB7W(6rq?lwnhglE~NYICz}=gXoRa>MeP zZQ#V`L-LxC)N_<^9*TZ3!1;Sqsq>_DQgmRKAp-<+&o1d=;$hcvl=)_g*&anr&QL$3(x+c!d>-~+|3{)u2$K1 z#M}Pfsy=tRIr1TJQ>22|2WgS<^NE|65We+CZLwIa{v0X#VAlsT5fwl~V~t zgdeip36?wBa#hPMw_MU3QvO2A&9~fK%O$NMrDs_#L>Ps+(x0>X#LYz^V7G+h$LEu= zW3-KhoMP-77dt065F>hw4NKs-SLEJdDaAv<{J^=5qR9)rq+Ph{m(FcR&RVx&5&+Z&+4%3~2_-uEB`b5D6(qUw#gK#!!JY6K^si&f@ng;y2ckZP3YBehxE_z?0T z^}E`6m`IUZwIeONXt&@@@v9eSvEoZqZBwpVeoW^`qjL-@ZDnTf!V15{^ zHZQRLRET($4U_Rdy=B;s7DR?!NhvB@NJzIVybZq;qL#EQ973VGbyIWqa-#99_ zif%2>(N}e%b7DJ6S5Z^vWvSYBSzeQQNzFD1e^I;c?vup`#Wr2dVZmj{%z`=mcNySe zj&vK>{|(2j(c9#KwtzMdP<%39Eq#UM(EAhYwpf-++hTWVExE2(#HGcuDcU;1 z-sYPoS{0jRUydEeDchn(CJl5WEd)5{k;4B+AU@~+ z3F5C6*}-qcVIUt;VtZ-12(qNaCtYW zQkz?^YWCKFpNm8>-|8CSBCp(}dPAzz>DHYgkDlRXnZ3?S z@w9sMOWZ75azUKAvCea8VYm>+u}!LWCd0o9lX6MY5}xquF3;_@uRlSW3)LbL&KWC-VNU|fd51Bz1_O=@yRey&lp|ZE95{!4K z9qjGV@XITAfVj+Xz`x660hQ-&oWI!=kz6<26db&PVmSkDy{p2YWQ3(ZAk{8F6tc`${@!Bl`&(` z2sWRV^e*Wnfpw=g5ka(OBAn!3pv`~TR-4UE8~52UK1r+^X?`4U$FeX%0gkh|Zjfs8 zT`Cgwst=GpnWt;>m)UAB$HF|h=5bef|@KEg1fE^$j|Xs&UmHdB|>%`UO|`qiDzpK-Oa9!<7I2T&kG zS&tEAi^_GUFPn9=?sR|oMcTF=;%&SK3x9_()oP`KeZlrS*&(#162<^A>`1{Y{uO%F zY6ojq*ghvajI=VI){PQ(i>5gA$392`a^1fGas^N0JkoY>@ zlBMSXIgw}y6F{0l9~&r$$=kU^P;}h% z295XV9RR*uO?{dV_IOtPX+D0XRus%tQx}P`ohS?5tJ8xt;?zhTi5&XVc?(bN)2o)1 zEhVhiQmpK5)A`VM7}K({9Hs3J+1*YwQniguL{49tv-H?Jdr>HQ9k{|#aKyomnt%I} z8cldFB=DG&<%Z`u(?hg9TZbq|>EYU6LL3(yIk^c7`d4`3{N)b)4>ZIfrH{D0-(o=5 zxuoei3i}WnZXv@IdF8jN_avfok?RjMfRGcxeA8>|?p#*Jg`{i*5p=QdUHW^Xhrm4rA1Qi(nn^N@=9PV_ z&ZV>}wV2EAPsI-8JwBNgoI*xwVfYY)L&z<4A|vqyGP>E6|&=KHYGPTC(U zDiS!pZIs5wPtuF7g1O#Gi z-gMx$#x9YX(EpdDjPO!%`qM(P{u~Vk$*PIwxYUYy;Z9Vtkft(4U(*Q;OFL@QQLTts zNb8@{O%$_`3XnFdAEJsvYli@qJg^SG*s|8nw)w77fs=D?DLNUwEpSp~ zJV6=%-OBiD%BaSm2I;iRfgvPc25IMj#n(!3b;}aUC9nu@BqR!UCgX6f^wj+SV&|f7 zplK8Ee`@r(qR`Kk2ci4urawv6AD2WLY2inIiT%GHi^T7IBUNJ^ZT`)7??|QH`Dm5B zMB5J4&?b<>G}=_6i{Cwo@xZh!gtT>>cjQ-T^6OBvmJ|nDMWZr$XG9|x|7;4^y+wb* z9q?jrurC;fE68zAo2sqj64##wtz@*H{LYAShy0FrD70~hxxO#e z*$fv-V`rPkc*|am!KUi#Mx)nMU7G;MU24v}$Gl-A8XVyfgd?W|c3oyJ2n|B={6vWV zA_}lKsUWmlZf2@%orz5@WMW7)GVfLy-}5@y>F{C5v0bY4H8#9gs%#a_vqO#I?+Lsc z3RP*7+sM4q&GZaHLfYhFZ7!`f#jSgqF~jv4X=J7&F^ekF=C|6Yf!m^Xt4t1}BO1wA z4vy)xIJC&>>pRNGd>3W;f-$uU1RZmD+R#)qtZB)(^_{?udQ?b29 z_ZpdfK+;y^q@70UX%~5W2lb+}aa|puGoH#eHqRs_3 z|NTzlW?vPGG)0C1CiNTN8}YS-t`V|)b)aj69K88rlf;Gs@S;mm&&k?D%9^-#plCIC6E?{P=^$|YYpSqRK zMOsw7Vl-wDUmBk~9IS&2lJoRm84wj438@X#&88ETp_JV45~5tJMTyXaV{=6o(vFk< zAoqio+(+z+F7NU#FW34aFETV)vCu?@;Kf>bg9O)n{fk)4WBlGk)o%8=h&u#>Opoz6 zc8AB!EtpT#zyX)+_|(N7q$oF*MYmo-**h!(W+Y9*$@3?)v*3zQ^fD~54pG~DUu#2B zXFw5G3AOJ@UoX)pI&JAi8ZW9TC^4(cB{G!QC%-6hfp0f zTUkQ4Yt4U_zFcm28Fj|%kQ<&w2=&NM2Pm4iE99G}mGqr4t9xDPsy-bnUtSyhqjObJ zAN*>*i)DDIb-Id)8ai-KRu@tTFUb;cOdks{==uUG&r&mr!>?3894=;08r%- zjnu!KVfPY6HtwT-k^}GJR}W?(OKcm_qbjg%b}^K%RIjrrl%#KU>%%*V27O%82{#+w zsYzadKE*=HUxM}sY`6J5s`hRZ$rRsp+Pfk0_^(o>CW->X;Uq+h6sl~;#P&bJMwp*f zX4Akl?tFVVqyu$6q(g5+ne*rb%ozMf#3T6yN~YV^Nd6Q2=0qe5!Y1)k*ZQIU7_CEr zrpn$c#9~Db>?e9A=+DV*wNL`pmzL1lxd0tvl#|bRk0Q*w7jRiQpKaE@OZO}5poa$# z4pC3nIwgOus=rEI>ek;OkgkG*F6~@zx$zm)#&c_(DRRRNNNOL4AFC`F+ID?=omPDI$g_Gws5VIL?|FT7spf=OcOuS^Gm>{a3m9E}H>kl)O3b9nwf z>kw;ezn@wnuth1}Mf#{h;_rUioP1ktI?o1~bAT4sVyuL`f9Ti2Ff)h5YoD-gbvvvSsYxG+Wzd6Q z55$jqpcFowA%)>}3`_|h%92{cW||g)ely<0CSc)ae;}H;**ip&NIHJvc!D=LEpM_Y zTMhXs#uzhlsf)@Q3Bt@tJvlN}4um+ESBZ$)TW>6DN|UfvpUt)4+f5+Fl`~^dD*8rO6F7@M5&c z4M|LUKEvzp5wIQ%Z(&J83!4l#)ooEsug<^_<86wI!c>mh;ODuVxYIujY!MY~@oPkx zgDQwE0yOybW@@zFbc~Yq(GWoU&B32y^uUrLK$x=}8bX}+)KzkT?%jDxPst5ekf-33g{-@DBXy4a^fidK;)J-B{Lqxe%w0IKq+$Pdf>J6dEFYksgP{U+D6AqEYB^Sc(;??_GH1}8D_8~2&zwyzmJVHM zvxnUarLV%AP`PYTm^}|B5U>&Ag!8bwacbojaqmj(JszCL^awpUQw6Rfk0y67f8FR1n3Nl+%v*hg!cz?SbQ zTU?;X4Xb(hy$rx?|Gn@Nzn(96be<>HL-5cFwjGlpR0`$j7(rCfanY}0K|$Lfr!DrM zi^eL_BD)d{5P5@3iMm)vXOV^-F4j@bC3;0Jb1u^>^0=zAA|G+f^@>8~T;bBw5omJh zz2Gz}y3@u$S>2AD&~xz-#E&Jh!PEo9OFA-OD$_Vo^@q^cw5!FLjXgs(45BVWrv`|Y zINUTmbqKOg-RzwC`#ZQ;Y1mB!#b)J(!yt#Cwf}m;!y@uc@mYlrhcYfL<;D*{c+rVa z*m71Y!z2y*Jadrvn0*Q*84=rj^;2S7xj{#C^bt@F1!LQ;4XfU;+bFIBZdu4S(iqes zz+qPCPv}H`8m|DeBV`$Gj6IQyjWm2GGTKQY8{rtC z&#dD|!f_I4Q^pU>BlNNu?|WD zs8}1@muM#jr7iksA_(alr$JmKH=OE<>oIGV@`ci@8&#bPbLzj(Cy7~W75be|SH9jf zRRtzNQ`F3%*KeVPW77T$B8_1O36XXwoVC9cA}s*FxqlGF5B{Y{{$>c09~H?@QSw@m zJVGRYNXgSg@=Qv8NhIGalHaD}$3*gjlsr!)KPHl2pyUsdfKL?3w7CUpvnV-*#E#ML zc`AJ`lC6bt()u`IAC!i@gFlnz7))o}9tgW->`LW^0HX9%tur0lZ<6=XPqofo^3sq$ z16ELmy)L>_*McaAb*-;IhQ+!F4{}JlCMGAH)>yQ=G1hTk>2u2wF$=OAnj!9o!-b^O zq899+jyVWsC*J4Cv=@GhkTLk*@8ymAPdIBg5J;onQuxhZlwH8y1^c!bmT1i1Ol`}K zw=F-pE3G#E1$6Az#*cU#!_>wwwGjqeRjs;C?Zjd^T{|uLS4L&gQk1p5OFx)#VNSsJ zWwZ^@_^OqJ$_(lzeF?%itEiydXrNx4%X98XUB$WP zCLFVZ5&j0W1S2H%T>C&`4`Xm0XZkxCoH#=?z;BL5O-Qa6$-kszYp?h;B^Qb0-wx*N zG=h?UO9&YKUPF|5sYupD^39aIP9!g<E`8m z7&B?+y%02*`)5OT`-W=kh?6AZ0zu0S00}?wsQDN28|y;kFWDDwJWTZ3mr;r}I*q}_ z0zCt~zxHE+ULm13mZR6xUO+phI!G}Lv)H9%zsQ_#(Q&-LDB}E(UWzC>;4C_+vWZO& z=3fuD75_u;VSm>C0@Xuj=(lo~o{06rMDR1j#E&V0EUmNQf%Zsl=qs{d z0t7J1at4J1yXA(j;gUsfLpwYU-JeTUI;kv4T11qn`b1i}(Tbx9Trt{3Uc`c0LAv7%Zxg&G zWnfKbDUmJ9L4u{nQGcY6-)SU&pa!=(N}P4k=m*F~ILlKZC>#6lCh`Xu@w?+~(j z0okZS1hqe-2qNkMczB2G7FnR{LT7A6fI5RtCU|G8hKD+X6ZQ`Xpkksq2#XbT7h&Ik zI+GJtL!$245+`gZLD**XUlaDjF2Xi-5tc~E3Co%|QQ0z1&`2E-ll~%gL{IutBXvYm z`m^YoBpRTsq%ODhu$SR>uqVO$TCC5kG4h&yE_PC3F}v^&}xg1wCNUU#{0 zgv|a59$MSZo9fGRux8>Owv1TE&6)(;tRO~lv*m>K1@yE@@&N;DkMBB~kA4i|`*PkT z#jwggHuvE{3rJa5SHqYw3Qf!bsB>dcSX<7`H_Jrzq~Wuvva{89fC}$b>o+f_7&f8M z5(dHqpX*PJw7(G>vSH;o?)o=7_p0!|io5)X9j&t3k|cd@mwpWVr;6pgjwSi!w`G#W zS0-#1Ve_u$=;JfwmAh2$$7u5i>H{D$jav0+fY<1|b)&Z{mD)FU5Iw|p|r9MW0eb?ZMixxVqb*9d`%)z#Um%M$s8DuN$pki6)-8M(Jm$b`Ky5DC9(R(|k?aqQd4)(EwZG&igmZk|TKVShi5|o8O?vq(=BfGyF zOF7tI7D>tmEPQM(Zo7imTRbuekb5JzrXE&(XR(NxvMdG z!`2zMyRgxQb-phRoCEePj75KBl%K^eVa7M$=uF?2;47n?_)3vqjNp*D2}sf(yc{** zCDiE;v8{2hJ~tnl)Q_|ylD4TY+G<`RcB$#u0WZa-4aWb3j1A|~7!jxqDlNL~)2d^o z`2e~as0qA!wK%ufqE{N~Sr~oH_!<{Rd|!&5kza(8NFSC7BZjP4c-Lv>fz8*hPN+aU z-VM(Hc!gnKP+?>aIqBRYDf$a^AW4h`Sp}7d+j|&ScqYNS#Mj%!wvsT5Vq@#XA-25) z7k`$FGNxT`8*UV@;75|?J2=Y3fjZHE%b(k6Rgak$Mjt?79HwaWLnL_On}GQ1V`wv5lE*#3?RpH zkPhSKAr3Yz59<#H0iJY0z`%V4tj$U+Qw!a{T(5dL4t`hPIC%SE5UdMh4p-nyVBP28 z>xKnkDvW!LbsfOIJJh)Z)kw=mAA&T*6GUq{@LQVUXrZM;`)AneyVJA%l=6E{#;#0TYSsM!5uq8t%Lau0msr zhpOSDDT@9qXE)CZr(TP`oRTG&XvWP6CQ@QsU`DS<&$h^eJaQHYhL7fy8o7)@E+$ zP0Zi~Kv?G(#poss3w?Nw{uJ&s`0@%ZUYnGctNXVg0+-b0-}IM+c9O(W@i@^Ee=R{JgZ1e_BUoI|YEz5~2Kf@;AhDX+|u|`qz`V8 z8ELuD7Dlf?WM8ZmR}s2K+F4p+%0qE>s!@|Dab}viX1XNKzhNs#LOE#zlu$>}R4&%* zVn40ZB(jcVq4`Du8ksaVh~01E{5*O6T7qRBcC{EZB&J`7Ng%`^`$jdMCDFpIq6|K6 z;Kc%9B;+IQ=H@ps=XzL?wBLgIlIMTj|5gEPOXfG>h?L(pP;nPPACIXV&is)13HS!n zt3#jsy5pwF>qX9D)+(=buBQR3kIxlZv1L1I{)y+tL_qMm<;oYiu-!ar1}RtRRynW% zC_ALb);py6E8KdS0!26OpGb6#BQFfayhG}MeOP6V+iQAKpU8@Orz}xoE&2!~oPZ&K zep%V@4A~(2(lU+a2RZQHLquSD_+_|4};@-g^P`Uy(r8Z@I{J0<&&eExk1+TU>%j99|Q zd=H8x(Rl3hV3ETGebHyE#mW9b*F79W-b3Ir$`0#XN5NNmUtB?!S8gT4Z3%mbn0W>V zT#B?6iY)XE7E~nmaRBHj{c6D`zV6LP;^y=0jq>%%T&Y9VasSGLJ%Ew};Mm`QG49J! zjR#UB>UUPvj_pX;liX27YZ^|8f@Rt%N`3^^l8O64Gk59hL~)`PKO$ z7Q2SMmy(Kk+@ss`l(KR#0XL_ij-T5rmDDD+W!Ou&S;(b7leYw57iCJJc3AvxQp0C* z%NG@2R$h0sqda3rd9e60k7Q!Eqg=ZahMum{7XSNDhO~OTjdZ%W24?xQ{2Tb#V- zNUp8#&8_Rw-lYu|X{x37o%#mq7ni|rdJ^$9=lavidfF9P-6MJf>l0hly96zZ(|;Jq z-%C(`F~KA1e{U!1$7*jD)St2hcSni*uqKo&;*T=y`N7P~lxsiW zYG1F^pXFOL5c~`X{{HtC!ToO$&G#o0yvN8aB(ZATc^RCwuM2|T0>7D)M`P>4^v>6- zvGvFCUz@|2iPglpzyWO7NP;%gjz1P1;ld76+XA_Y%TH5t5GBN^CFij{X9wNv3+#x@ zTO@E`!5-2=J^Lo79a)err1cKEpbZl;v;xJ<^MR^Q z$aS)ByYvg7GRaV=RiF+q??nxGYJnonP4GLI3BmjUjX!C#v)~x+0x$S0Qn84r#z-v| zutRQRIn5R%Uw{!YGJ$I|kEe2QgrzS54af^u; ztV6%sp)bfH22qKO^;>AfcPr2FIR|_k?1Wj}h0ka3qIHliEpdE~1I~h-=ZUDqgjX^NZVY?}+a#~t< zhZlMVZFH9-50{F3c^Rs;f58<| z_LZ9*akJCy&jCp+BA2UrEog;3kUla8H}OzvtX0ZW5O&kW6`bX>uRQFKhnIntuz*Ie2Mi^28Og78W-$uvB@lfiVxSvz(^x8z?K^$ zB=k9dw4yIwcR*LF-cjgkPm^(mu&)q1cY zEadM&9E!b9ioyOC8!EA_l!WU3sz9#5#ng*gX%<#k;N;V8>2oahF+QuB%r!WUa+F5> z?`!klN|`rH_0rOgx^v=kw|DaEq-R_LAjMrku=Z-fs@aNxvE!!z)(S$IzXYuAd9ebc zyd|P^C$BYiej8;TOqpX_p=R7N?>8t#io|4Dnq*&jf$@EfUNH!(v<%!Vgi%F4^_{+v z#ysq79Qq?!ZtoMBzQGVhwGU!Y;HG;Wb!kFg(g{2SrrCTA7wix>>7*FNgBF0K#6IwU zg4Zjc*147-48SsF15F21;@4E7E8l15i300A1yV`l3jfAK#7n*#xZZ^uVSf4(K0$mA zXKfDBFeCpRe)H6iDSmKBB)3xXRU(=E<~}6HAA~ud9_%}}F*9oewmm@dl=&t!`&d9* zXO5@Lmk_oNdyvBx&DuaSE9JcQixko*C35~Mk(1V|$vIE8Q_i+T&PtIJ^V4TZ@OB{= z7JZ3a*Cuj(nUw2Io@;9&*LRpoXHu{OvV)FP|A%wX zhLh3$O8q&?=YghJ_MC*yvG`sG`xU0M1BndZi45ORhD!OJ;_1lHA)vG+GMxv-DV;>V zZ;{U_9lc;S4$E0{@~^OERl?`8pv%l~%I*^=*2#-~C5rV$!jnMIBYVD%BY0MkHdE>W zYJr8|0U&q~KnF~4u&Y!poFi^O+vUJvvcf5M=r270vO3t$j=}qo@OHpENqE17cdGD0 z%k|PU;XMm4^+xo+F;tTm=){jLl_{|)k#y`=wMZ%!Kp74&a4y))91C?${N)uf?Q;Gd zH%4ALE1P`-UA;akH?R#F%{i6)MJd`(kpUE)7SOE=)fk=ODjSzEYk;alN`%r~td}Zp zcge4h%PG;qB?=pv8>Q?0W(D3vg5=9}>2yZ0T`^OM>CL>g}E^^YvqQ_ zq&H*|OKs=J%Q%=e>V)+$sAl|lR(UGy(y05FAY&8J5;oBpMHoo&bE^1$g8&Va*9Q^V9l&9L15ARBMRQ!S78vK-{Q(u{TBtN=zl1~(_KkRi z0b*!4^)bJKK){c|9uw1(y)YELc>}j5q1e4vY*R|~iVg3?sTbn0O{u<=CfGGjToDxS zc69Ik_(W;B)c?&k45p;>S(=~idiuo8&9vn|Up`SfE^Lg-fDHh4fbR|fZDePdrtq|t z2=u&9Nmo_+kbCvF%`5cP% z!edoKU`4YRw_Y@aGp^^sHgIjjbQ-rf&`)7S9t_7+g$X4j-njxZ33)>8P1x_$KzhY5 z3PO7-u9KcQNyD1oiZlmY4$?;WjYlFIyc0;GaBoGS<>p&%uI19o30W($$c>w93KixQ zt}jZ|Km9`WKb2Jf%h~^L>xVSrGvdVd(F7|=lPbm+?|;3K46$3v&*6W}7HOoROn=%& zx&djc{juK2EmRxnM)W+nj6d?Rz`B@+rw3VM5c!CM`TjEbJux2^PGC$hOrH(Q0n7aJ zWvTJ2QHlM@xG{X1<(I+d48cU}n=U3<-_-y63HAsc8|*p3KKWy|jeUG-w<3+pK7VTM zC8pN+RJrRa5XiVwgA<=B?}gtyed)i_N8te%OoE=}LM!r}i#CujDu1-&T6$K*yUG1% zXWt4;O?S&HXJ&`L!ld}AiKR$PACZka=e4tLtUp}`y2x4$PMIL-9-WU#J$n%wgE{^3 zgY#%w%j{DyA{Ro423s+5;axw7RIZ0G`n@>>Sko0UPZO?Xqjsa8N>Ml>qnRuE)5L^I z)!5vR`dhDcr$W5~2q-`r5Y5?aS7UVEK`$d_$;Ng%PLWpvW=vmahH>k$~kX0;Jo2 z&nk$XHA!IU4Z)gkY4v3x=mspO)P-Xgtp5_Q-sG?{f6qn`tRD+l**6r7$)#6DjCtwl z?bldj%t#{Rw>Za(H@rKJ_W>>@_A!7oRJSh&j_9kcv%5Nna5O5(Un$@GXW7?6vuR!F=)2OORtjs=Vz(5k$Q0lX>mp_NkUn*=(HUyln2cFJvi4#sOT}JHm0usj_hM{BZnQ7S zuV%de2Y}+n3+==lrAKHh20ikry{R*^A-ICOaF*`c^O?Kg5KdREtyph7ql&EVr)z?HXLWMADRuh~r-2YF@Y3wYvS z#T48vs?j=S*?0sbC8EUTE|5KdL)Z9R@e?su%v3)rk39%>hQG$NhUxBkIPtCD=Qw#W`(#r5;LRf0Ps!HCu@HVU3X6#!)PL0< zTS0X(Ji8^<6ekc5F%zg?rTvRz%P6c z;Jap@1zo^vXC(mZ0`L(40fBK>hyxx6z?Y8{fcq4TEQ}_D-Ovqe{sqC(%ncCw1;C#2 zS=~3X(4JylzYW&oon-JgzmKRj(-xDzdvP-QU{`zA(Do8TGC{6C;#59Pu9>&TN%gLn zOtVn6ql;D!POLkhLgg4$#r+)xGYaWp1*{nLS9s^(k<_qcs`1R`NmNE(%2`L;I0lBkq1aWuO*P1C#>E`;n8>OKaG|3$!w(SigB~1` z{2NFR2*q>0It=(E1Cn2L0FIHSAAz=x?l|y=mGGvUp;O1DF zBWrnGTn!g!VOy)H+94SN@AkXEFZOzz7$!GHypU&cr)s>s=>gs}PAGXz`8g`gOEnj5 zW5y&jZY>4_D&sfzB7y0Mp$!G&FMqXf<#eNiY-?G^AI#i>)ggcBCyWVu?BEc$RlpFW z_qFhpTZe}oHY@%~WEqO)52n0R6m3u*=J%zJ!L2Y};_-NMC6?;{qlJFZo%W7yQ2jMk zZ5j3yss0EmkL~%Q_tJ-WWNY_G!kwN4^4$dz%|>96qhGVe8*o;|D~n9Lbf*20xS|dk z1$skMe}h8pPW*tYMSs6SGD2Boe=ua)VX}>x>Z4*(-rIizzNGG7G~!%MRWsGjmKGvh zQxy_{Vgx{c9Bj*L_B-|B-@t4h+9)Au^j9Vz8C~${G|rI|>r@LD)p&I$jS%(}_hi!j(D*Q0Xa4fF)s^IOYVgC>Q8%FCqQL2QKzkv9l7tcz)&vBxc_vZ33SX zkAmZPHM*zH{L?p9r`T_zKB>?K-2h|0vA49MW9(0%UxpiwTiVb$_Sv|Tgkx4bkh&F` zs}%nq;uQxoOYm@Nxp+7=MGia)Y=9(T>j<8xaq_Oap7)&Do4+7Xj8fW@U_4oME!37-BoQCJCol~d#7BoCX}*LMK6qj!g+#?QMXG1?63#-M$;xCL>?WSqEW)$_O!M@2?!}9eQ<@WY6>b-KOa9 z?t`$!uGm_XbC4Lkr|UM7ehiOZw>T6D39)!Wq>;bginK^0RY8ANnfOlkad}N67i@+- zBClCYfEGO;Tnwjt(dr;QljT^{5Ts|b;LxL6s&_G;+4PM$2nFqn9YM!psXXXgoDv+n zI2B0y?M+hjQZ#oonp4*-a648QLO#g)`9W;~-Wli5&vLWe`YkJfR?;aR=CjZH@Ts~T zPJF5!gtH#A+D>zE9knA_ztPQJf|QB0{k~Pat_{h@2pZ#0#rO-X_XfzmTf`JB5v@OwzdxGVltg2ILlDzA&#XI$lGA6fU# zjURu_(XYZ>($^fMpZ7=IeUh(%=>T03UN{5s7Q@pFrn-4KU#y+dX$-SR76yR_{Y8f1VhNmub>!eLGHfa~L9OUM9Aro71xKUQs`s6@@2-Tw;Xu?K0&MaxqVHwc=9Ab#H+z4(W-gU+U z3z&=Xpu{t+SesW2BGpCR+!C8F7x7%royn4x4#RS9zj)qC6)pR?$8W z&em>8o^J?V1{JNaFh$kW+oEWyj~^IQpPJW+3U@Tcq90j3F2Ls6e7KNm_1(AF?~0*^ zdH5Jiof?VVMup0sZ$yH*6>+S>P3vMJp7}Npk4}_%gNMfweHpSO zI>|shRJXH0WdmC>oFhT{w9P>HSMh`V|YzD1CNQqKTw6zonT7eaO>vMJ*r%Z&(M5M_9z)! zQ!uV0saS91yJCO!ucMl|YSCUtwW-GX2vrBzkZdroIAi{8O9~zj{0?8vm~lOwD~XJJ z^#A2F7G>$+o`1m5i__&l5JL<@d+`rG#iWRV?!OKpp8sj2iuZm{W?Q_>WUCA`@ZhP` zWGm1BNo6saS7T&Z@noI(&Nz~49)V^M<9mTAv`X#nsIk0Eem}IVV;6$xuHMxt!Ux; z|E46Y7ks_3CF*RSBPc!kuSPeNFAU>57+(kILG)61kE|GU>ejH z(z1wu1%o_F*+QDa=E1y%chvPSi~P}F;#vcZ1DE~+KZ6*GGl-!v;7&NjALGEbu+C$= z-a<@=Yd+#oA{TW~`v96BOJu>5i3~~S5_owvh#Y7(J*r{l=QvpfDZl*897@zS6aqmT z$j24Q(aZ6<5EA`npM!iJSV~LJP7D2UD^cRw2n_E0lj9|Qneh_MpJ4px8%CpQ^W!t{ zM;4Nw{@{(DAh{yL3Psege9O(XT-xv<>#!_x+dsf$8Rr>T8@9L5?0HBUA$ErOv0%gIiNMe{Xnb=NkXG++Dz=z=^{b=7;N)_l=$IQ zM57)e>ZmyB6-P+%V@!U21eWhxH{>?4ij5x`HV|MjKE{m+z@*aC%&IXT z1^ck=bpJ&P!;GAr5&Wdz4l=hmYeLzuFk;`xYd&?f|qa5P=1|NA+B!r3Mo<1_~RT&X$0hND69niEPr?seE~ z$UVbZ^L5>HaC3bN-s4MA3J&6HNU~CYh|-mCJG_U<3o%qS8#5J7iZ29-F9e1Z~cmP3}ukel5Xt7Ho3XY%YEfK*$%S>YP$rGLT2R0f|1~ ztl3TF*HLjt!5(ML9xBd#+c>t;ekFVwIGm2-uub7Nmx03$bYxbg;mCs3unAmX`e~xg zXskn`C}=)SXHepg35PTA9R{4FnQF{)NDjP12TcBbLE@j;K)KPl0!@c^ zxn4Ov5Hjj=z_jAq5cH-1o-c-WxDK0AjH${(^c09j3|1Cw@3DM102o8B9WCadEZvvcfCz;f!rLFQas;D=J_%;#$0go?4JQ-fz ztDM5c;LmfZtdLyd7mFdfQK5oOgvj(5gYHJ}wdvU}FtQM{yI{h(->_eWTQsyUMEc_S zcD6Y>NOwMOJdh(L7I1Y0B8F>4+WaP)FI{)8Um^SY>Q!$Q>?z$d|0vEfaKnJL#HyO2 zU%1QW2W9OJ(qbV}Ure_QahsY}u|Hw^_H^o1>-U_YBzfhFOOOT)A>C_QybOM*A1S4@ zaXA9=vk?M9=g4*t1nsR) zE7I5wuwRXK=q1(_etEGULqyb-3x!|Q`=42c{BMLNmGMB$cf_vnI zOh_L+I=BnB2tbnvr^(0!O@?=)NsFLKaf|O3izanoLyYg9^w=AxNAcb+e8{pZ#O@mn z2RO{Z8yhjX;Z3Y!^t({~9ur3Gyk7dkAx-oy+>Ao6-zp1cI zUH$PZ)co|l(t9|xb{U9bbtRY$|3F+&M|mgVeyR_P5h-yw*| zarXY4q^E=7@x@wuY;)Pfx8{vX2*peEiR({pmg)P35QPUJ3b}0Y-2|~T^9HgnLgCg$ zBO#WqsoBiMl8GlL*nov3OFYJt_IU@34p3owmO`vw(Nq2+H)&0IG(L%d&r@L%D02qo zr~eCz4nmBExJdOsHN zOFLuKZwZ7m;#S z+|!t%=TQ~9@H zHi`BvQlubGM8bBm5ycBB#|a3lp2n)73Gep7-3!xW0`o5;6}(YDqO3XKD%_UY%q$+VpYraC3T>!-b{iIE9PbR z5G%gz6LB!->e7#EVX)q&6zs!#%DLPH-IbB~A8b$A#MQEa(*WGF*rya=)Rt%9BWeX- z13Vj@i7!YMe9Wp=)AQm+_MfpUTM?eT911LY1?YZk!>WS%rL1bbcBYTqC}uCbL*$x< zF&tFA<0wO`)=cX_^f*0b;e>AFGlaDHt8KJ#TTMyrH$XsQ#DbKqc*qmEmf&dB^D^_i z4*NvizgnO8dci@qA2T-3u}e+Gml`>1Y|KYd7B){oH7IRn6JHn6uTnI9aJH7;#+ay& zz)dN8F2 zbWv0u*Nt(Ho7b?@A^BehhD6C{MnOiR3g%fI9ZPMj9jP)rY{Q!+VJ>wpJJojTBYYos zWT*7qDcsNVFNZ8zk*EMK|Dm?S=8dSwBSBGvwA9H^*i8ydi?86lLj=X=W&}lJ(F(j~QS8wlFNek{vHTVDEh&_mp*kIEWS5EF z7=>$d7~@CH*PwHvw=OuGj~vo>&_$Nb2ifR=7Pv+q71-m(p+0@uf?lY5HLNy_L4WQ^ zI1mFD%9cCXKOsqi(E&;QhZhr(ipyYKl~eEGOIGH!sGk&lpPQ|4t&DYikk`S)9i8~P)!d2S_oojwh7 zN`$}S;jSxK2YGmF;+S9u!t~r(FZ8Q}m0_k`X7lxdDHh0yh0?W%SdOg_w!!GEe7=DL zJ=LTsFQJdMzCRCpTk)dlp9psy53H%U(1jPhOGr`cbm(}#1Y)%q?_}{_r%Q$0WAWh# zW6;g!I~zzLz7=07{eHCnONi9b5UKQi_fzJXqeT9>8RnSP@I)#~Pz||-mYZ+6xt5z_ zxmlLWXKvNf!jWpN+ZWug5qzzyK@r-4IQVXBND z!mEZdU1b5H$RGIOTR?~dpjGW#eaDu;DC!^X=CpVfUh0r%W-cNqT~BB?R2XA zGFOGtqS2|}1rrWB=y$U9pR7k|0f!nV-uB%qA~bP>J%1y18~;Lgoo+}>3*`CHZrU_T6|KfgsMNEY36ofIow z?Z>?r`RV%*)q59?aM&VB9bpW3k~MtXjKaD>^kvU{9O41$a|E^^phg-#ZiP#K`XZ_{ z7G~VlPN&Jn>^_8r#YWHXr<|}&DnWU-v3h?9L3-({I*urHmze=X4OLMQDMx>itRbB=vNxPl-QoHh)bdD z<7O%5>t{hBJ|?vHXk^&rz|Y`B_-o~WV~gI;S=*}8%;qTj!B{zzn=%w}K8P!Cwdladf6T52q3Gv4f2$ALAe}vne7yxKDbs|Gc9`8D zvKAP_L!z?tgiwb8xaD!0dZHmH`a_XYic{1O`!LUXVVhml;JDJrlFgVFuqrm&>hmm- zuvOHG8o$qOO^w($tTR30%d*^a>Bw-E2E1}BRm9(Dk>#Wrf_Idzw3Z)Y!W(<@X*96a z#Cxkggh8#~p{6B^AaCyv$l*=NR!+U>_m?HaowBr7=>9d6WM|~<%zi*n{B`Vt4(g^} zhYSPqRZr=01xkC44^Wbx4&hd%0>E zqD#hEZta_47kL_D8rM8LW4F9?p#XF2cYUob&xva*F^Zov)4PEvfbo@}D*%wpt(Gpt4Es{_^x z(6>U$a`W>V*Nu`!qh#H;KRV8hYANp5Gx3M+!vXm~o zDA9sr^ztf^uDGJFvYsFCH5N2eDZmpY$Jff(_x^%x>|Z=#R4`>GgxK=O@APYW@!+!H_sH)KWSjJ)?FK12rXX9bTE@5t_( z&1o|jb8fz95?|4P^AOuTXCe}0#jAKe&E)CB@ov%QCMk)tp4=?uG@dNv5Q-)Qb@9MT z>7(JQEi9Q&@DAYkf%#!`_#m6@t+k&9eDAR_3fhTYp}eUI&U;oS7>Ft3wgf7T!l9sH zhO~7+zA558)#f^@h|`MxC*!U?+AHR)=zGEUc$=_tW^k}G>1Z?JIY=~-(sQ>!`_rR= zUXCA;LyU$ViGRr1uUJ|>DuSX+VzrNeq%MTvM#WmB3QA)N4WhCnUTM}r5f_HddsU91 zOU<_aPEzV`xw4Lh-P~tY?@Y^T)qO`sO8hhpvS1zwW)T_>0BE>zoe;*X zny)u1)y!Hp*?C&%DGH=YF~^`>J=mTP{O}F&U;IY+;a2$Jr1HZpx5{>sVNaJYZ?1pCyj8c8reo;uGH>HoAluOzL|X1l405N~a+`C6*lK%Uf#D6w&!Fy5S!?86T;A--~Zl$XI;o=ds`_QlNd zUY~SI)zh*J%X7ol^B#-)JU7I2{n}7#rD~G2S&7S3nRuNv1l12mxo5|f0^;A?ql-1X zg7Ph-hD;?c^YZJ;x%_q#CQ{40L1ipof8`y;d)X(%e=DZ;J^U@<&6;nJqw)JQXqeJ` zA15vhnbeS&Cbx0ac3rBK(TfOYk*tQzWsw}QpGETXEM$<29}pD(#oGfF-AqMhBiFD| zHZOxWKzErE-t4D@IiM0Hd{auePfBp7++dP@DtB&(uOV@{d9#tzvQe`4Ezvx6yD)+% zdHL7cC@j7F3p>9Xi!)xQb?7U%8r*u*DE-x4q^cEp_i;1zfx~(d(kh*SVHRgep|T5Y z_%Tdzy_}>fVU_omp|Z&3NXNrKLTq=X!yX#{l1ytc!uxokm_DezwlzogD6$~F1Nt;h zf<2of>D?*knm!$dMERvo)2G);pZ@GET3vMm25Txg!+Y{)lDg{Vd%^xTUad`Hc_|#* z=jSmA!`=M+WqQ=UiPNO!+CsW^ytLJfUZM%Z0W6+3k4G0rrYBhXEMIK7$@E3Igt^p( zg%wq6gfWGJeNRf}kh{{X?9WNj6nmbB4A%lXZY-B9f@1zt4C$(MUK*OR&RZVan_KQihL8uL#$H56A^TYT?{$&6X{>ia+_|mN zx%pnq$NWz0zjFl#UDy>pGLx<4|4NTKHz5YCXtx7nrH|#2EuA!;CFe{D2wnc;T{OtO z<|oLEUs`Lr{D%a^|FToUr#xh$>m>Rm6J0OSg(mt=6J06MhTAPzB+&u+F0NDnCpu+_kq!umn_g@T{$>t zh|l|2$4%eBLKYiuW9bj5Zlh9ocgjrJB)Hd{{*XTU57UKTASnLio6<-16vxkU`BD9; zl)Zr3p$NNp5@Z8YSFm7_@ED+q2KFu@v#~G0`|3{FJo`X#3^ogqF*Xi_iuh{F8h z!J%K8VV)#SSW3?@%&TRXU*E1s;+p8u68*4={d{miIOE$vPb2ML#2aKvXf7$xLf`^&z908>AXr2S`cV z?~rmJ$QmzcJ)3j^Y^`bK;?U|t%=XF3D@CfHjj2`az3l?a z;^+41`aYDm_Ig$3q0MMqYle7y<61MsV>sil3|Ey3L5)pFDt@;p!^tM`bOMISG(RI% zIlKpiF=V}PL^L|GOmbhaVd_E!HQJlDvfgAeJYGvVyVCg-GYG$(r)57H)xv5Q zW~iZ{w{POMpK!FG?dTzCk6O<+$g<_@lD(E=6jDaB!P4<6dFmPBtS2VZG3?{gS~}if zRWYh6 zwcfL_S7=|*W<#$y(iDA_qvrg-O*14ncv*J)-tpRqYKAka;e@KmJ*j4ZQ}B7ZDm6%z zL{sBqPgTWQei#%H;8a!R7^*65qN-ARu8|?i6&7`!K|d?1nmaxY*at*^1zkQK**FIs zmS#WV76e1+uvp7~O4bNZPVm4^hEC3UQ39zw*V`SEL|rR**F8fYXEWFPveC)eoYDa) zTF-J#;tIPx@#Y|CH)lfoLJC^SI~#oKQ}7jSww6DZf{#Z=E3D~9%sNwiJmNbzcLn1r z2rimeX!XxOG@yDldKGdU5j?-kP5S|{WQBdC_c=;zIAL^DhOs`njaigoM^A$BMoXn5 zaec!EQBvtR;b9R9=2!g)EtQp;XtyY;G`+2QDjMRUrxU(4jcKK&ifaE(WzN%*%l#G_ zD=Q72U7%V>i_lr&f*cfKT3QR~NTwE2?ND8i6JOLH_=mH~J6ae^qmQKW4w>Xe-jSLC zoj-)6HlEB`Ha_Go7-v*qbZ)SY$M0Mzk$cdB*=V$2_5^%bR0xg}HJGJC2(}Z~RaET> zySY!GIgMW7IDgRY$`{JxgN<^1VcXU)uggZNDK)rA|g~=XHmLA@q)L#?~&o{#1;teGm z9^NfiVDwp7xY3_+t39zB(50gAByGWW&$E@jd9PY4h036D&52@FKGa26^bbAyc6Nn3 zjZEp>&6aKwS(D$>Ld+y=kxAN15|uk&j}JoZg5NmST5#~Izw`wxuKgrx5+ z%2l-fYvz}s>e+uMRDGqaUuaLT2J^1h4RioSOG>Bo)}|Pog_&+?vi>zud$Xd$U>zrH zl9y^su~R8FRTRo{6m^J-DL@FYm*+~!lax1_QlJEyF5!^O2bU#1XK*aJ!E~pGf2EE- z3N4{yNh8Wys8bo7;=T@-($5%7D>|Hd2Iy6~IkQ-|ei-9ockN#zo{|c^sK$rT(JF{c zS}lx$^~hsKMSi6&`_SQ;*1ipk|y0!4gD-IsyWhwNfBrC? zNnV=TtGzUEwlWJ7m$CEvKj^1>UBkEuQ(@#f@uqFivkg=&<0?YN2hlu`--m$+^XgdO z;++NIdjk+xd`0&k{s;3w96`KgUF0y-lO`%Fx>U#)nU4y~yH`g>5_bIEA|J$k$!wHL_25sZOvRVKhPU z8C09nXP_=;h;xg)qE(ldRafNQi=~2)9Yb}~-ki9TFmfZro|(@(RE0#qA)IbJeqP9$ z+Qx$>@GqWkJ?~!y&sqO{HDu<@EQ)Sh_9@v$g>dw7pQA8PvZ3z%GI#W_K*^Rm>~v3i zC}=-XPvHR{8c@@ghIp;YenQBteMf%K#-z2F&ugq3omF>!Yx?pokI{YE_yjIg<0#&3 ztQ(iL>{0tiBDZj6jSsv{{6u zEVm8FuXKEY<=j_<_{O($2IW~YG;HwT{aIt*JhM4l1SXf;o#pnCa{DCuNZbp1xUC|( zr!}-us;L=*X!*Pci}WreW6!p8cHk~^SI#>@Ta_{$A}48-z#q01{m(xcw0%n{5~0$hcg!cBuhF z^ggh3$ap%YO7Wz7qn9>&ON;Ae;d@*~DYOU`r4Hy>NUFbWGB16@2c7{iF`3a*! z_NYkQNf8_;#u_!(xv_nPzE=1hHoyVjQH?w=)-#HmD&|IqsL)_+>{^yc8PF`Wg&Z}S zVUM6!F7SE<%kB@i(GP;x9`5qa8*5B7N|mDSbFSSI``C|qvHjHwuBqg8#L*rO*glXp zzasjP8ooP>$cx7Ntw-b~Y`M)+fV%S-UCm^zlJXMLq4aSea%dYsupx|{Ntub1P@)vZv+Kq=8&~~l(v-{L!7@a|B~^@ zd&t)E$#@Ka|9q0ga!oU)sLokmGxJXb6)Q~n-?ccQ`@}vNF4=57x`9$KfQ1c220YIj zaBfNRW*N2zxvafU-V=YTl~lZsCi;i=v6nE=!{fyr)}v8!Gh3r#MhmFUwH`T7%G+$R zp|i>XiXc|}Z~j9QE}ucPAWVU3h8cb8b8M)A9XUzl6414X@ZyCM&NR>ha^W9N2X;aY*Pykz5dr?E_4uvOQ=ul^S+ z&iBA!R-BOp#dkN$Ay_ikdgKlmmK4YbVc!gK>xw_q1v@FGZOWZc9;_lITFWO0obHsD zDGny%z1J!AK~w56g5r-;D$x>7^eYm5lOU;EunTwm0TX@LME_Kx|J6hvk?31Y^jjvn zUZQ_tq7xGRmnJ&T)P0Xce{7;3l;}be-HV&Lr%LpG6a9fiA9z(k+iar0Akha*^xG1> zjc6l(471*2`htcx9LoaXYO7FNW!}|%OFnnV()D$5%|u=_mJ*nPrK7yxLho1EqHwGD z5dV3h{&5;Br{rOO#4XK>xZ(V`TqjTDuB9S)b&pM`-J)$+#?MRN*9lPYecbUY1;|YO zK3$*g5D9B(*xtgDBBOC+6$Gjdt zA5h>8nT3aIhB%?-0M@`k*Ib@;uyb^s2EtO6p?Y*CwLab!HoAMFc4_NIBy6u1-o7=o zN2_$rzKeG%lxNyw7^bITb~6~JJ!ytXrqw*bD>;mo2jwHKnpg6~l}F;YagiJ*w2&%5 zS!JiyiYThkuI?#{QJogEraR@BXQho~!03}$Q8`J`=w7PZ ztL3yY?%WCCv-Rrrh>R>X&D!%hA?F4uVdZn+#JA!C|PJHNQx!v0y>aZm33ws6?J}-{GBS@Sls(j9DG^x0@m^!^oy{PGIRt!7|GyT%PO4Hqf&*P5& z2Zv3HfM@VW*bivv>(LS0M#*}zSUcQcb;Cx95FSWN_ZX+vX=4R5xF@cYCv{((U!6SO zi6S@02hAQ#;rJ`uX?YdyEj;VN;PTkS!T9Y^JbFA|81EHp*%M_Y?1=kpAq%uJc5)7K z1ihbfciMPl4H917(DDrFun={Y1&sa>y`Z! zLEiX3Qn*Z&>8Vpwem$CSlL!Az9!(JFxSDQ4<@lp@ykd3ys&5TG71N^P3xOUOp9`v#9gGaZ|RbldCd`QZd$1wU!w|LSjg z9Tj$?dD2uM&(k8GeFi570?ks4y{?@f4hx>+$Eg@)yBo#tR1}77 zx63%k;uI4)PQ_KW+h)QT1h)rgYxJM^f*edH1q=pE!Aya%KK_raPSNJIB*`kbf*ZZv zqO@}mQ=M_%G;m(r&=*eiho}Sv?G0FPFSp;4$BOJz+Iku+Z4ROqa2>%24vx*JcneeY)b9VRv|IdZL0|D%xjsHy`Y6RnvOf7ca%wB|b zv+%I<4zTlfe>D$Jnv8vnVo=y!CzM4S63+pAXqW_`2PkRv4(b~~@9{@s!c$)PXqOhX zhMMIkgFjjYfAm}UqqXoyFC&kGK1ucQJ&3S`M~O;uH@bi@;Tz6@bGMDpjV>Ap{H?7% z;j7MZG~Q#a^4KAe3`@W6N`W$?ihtHMt@bb2ol5hwYA&Q{(ga|TfcUL5#2tMIw?|B* zw=#%HN?!r~u%WLWNF(-^3Rw`^!ZvF52e}LLsuFcqZCl3cg!0ph%OT)wGHz#sQOiaH zgP3v&@T=Hxu&?I+zCCQx?W=0@VHu>%)QS3c)(fUwvjrynr6s@t!|-i_;(v{z$Y6QP zp!$W7V!z_9-fSv2{P&=EAygW_n`WLRUI>B4uRnXdOf-%E*;(T!U<#AUqeQCIPuF{8 z39X+sCVe&M!A@hg?jp{^vh6mu^{6kvT^~z{2$f#naod1e_^Xkjh1RP@L-l%Lo3F!q zb;i)V;QY-$xJBL{I#w8zfKj3O?>zn(oBh}cUQXH)a`VsQrQ+9Cg$B~i-zEuS#|wkS zn?<@;+=1;6d&XRoTa(V975%`hulb^ zKREv_Q#VC9vvYee-=Za-C=B|xPjidT3&f7+VC!UJOUTzbKPhn-qY0|96_fF3AA3u-u?%CJprxM+qB z&9E)lG=sE~BfI#xK;T>NrOwBeiKMm4I}$nU?@5@A;GrcaP%PG3ass{%47Q{S9x&Ll zNekW-Y>Kqxh@lEPrVyD5Xk~1Gr1?4F50s~~w;L@TCY@{&t|BS-;m%`^!#yTtRb@Ih zwvHv17eXj8718S_ZAxA%rK#;Kcx|*9RYsH?{@oOky*d-E|PM$gFb=dH~MR&+e9S0iQ2zZqqtg0BBuCR?P8S6c9o zMZ$e<(C!WvZwUFif_5<4X3vhsi#tNa9RauK9D7EzD^R?N*%dv?$z<&snbM_MP9%3N zbLwU0)W)D2v~q%kurJ;g;+-mA$4zb#uL|bOwToIBV>!jgxaK)b{WDs|hKk#;fs`|s zx>`zu#T~I;(nVS-!A%UQ94)Q=IkZIJ$F$u}oxNf9tgUPWp~CL)%YMYO9V?iZLouAg zL@DdR9>KK7{G9Oyhsw+;+m#WJEdjeT0%S^;y-&c@$0lZD&vmF=5F1Oqb+!L-#(Od( zOxMp*j63`nD{~ml7HL1F1g~SekbfPfKFaO&ymd5tWKV@}!?ednUsTpKdRTdKeR<>Y zyxP4?5b#GSMC~S#q3bZ6**-15?9VR0aG-n^gwK{g##%Fdr!U5XI!QP3^=u9S=5O-x zk4Jm%mX5g5wjeNWWa>baJ)MVmr@Fz?Y|Q4&ZPRBmulW?1E!?-AWbfp=5k z7%V|Coo3$X`frWJaXt9HjslXy%;qVmSsGZ?R5rD#?9!&8tPnT3!P~Mm^roh=%bLo3P*=jfX2QPE zR7O!-$v({lLI5L ze3Aa`0jizu3?D|KfOL#NdZR#^6iB6;@1{w2?`oPEXd3Cx7)7$CnNyo)`nZqzdG*}X zG&B1qcgBV4$-(8z#!6Z2!|bM+mCVvx+!@2N)mIuYabHv4Jxw#m`rdXUz$@*a(=`23 z1}WWq#^f@VP5R?oUe~94dO#i`@b8iiPs4xKo|ZNY0AHF3d>|8enw66Q5|5=1z(dyq zUj{sM`elO#haUgJpkcXb5T;a}1%AMn`IJn9Z>CVwNIEx5`*SSt(QR1jqT7L-K8dCK z%$J&0GQJ>7&Y%Gg08eStgH`;^;qM;)D*2nr-%Z|nBK^m#$pAoRQ`v4Af0(4Q9({nOFK*lV+hYmbL9;TOmCvdpN`_>P#DrK%$tiI>=_^{1A#K*hK zP)sh@HXh5X-G`lIjx)k9LWcC8=#hu*bHn!6#`4EP`85{9$D}BJo-seo=BJ0B)HL$w zt)idI_p;qS%&JX)U)_7u{eimos(T+KOlT5()@SPG3Ha&MJ)OFzQ}>hgTHBM)n4f0z z)5Fi1^f84$TF;GI&)w>-6ZexpC5w0;6<$U|cH;QI1Bf}VUt90}3)@4n6iy?`Xha!} zc(k6X_<6?sG@G9ue!NkX{^RVC+k`_gfq3K{Y^h-Veq^{|{YiEz;o{9~Ynq}tS=KB0 z=kh)uPxY-S8j7Y&z}}C+kTQ;_r@0ZIU-{I=*do;JBJS{++(KU=i6dWrX6<@y69?U>kO><6vaDSNQe4HJjL zM`g(dfEgHumLB=nmMO0o5xI{;R^h0+ZL+3pp*C?5EkL zvOkB#mXP>#yvFo%VQr_`oTSwZGS<^G%YQ{g&jI@_9vednI+#9To*)3rH$@KiBU6&$ zhM4q;Fs5$qie=hhv5g;@BHtNPPBSq~0+|@qidgyQf>_wKt1I9Ua&sTyUt!OKzV`!Y ztNrBcaHjNc&+Ly;u3t`9RhLdK_xM^>y3a+QHqcM+Sa=&HLuLanOXDii&C;I2o>E*+ zdedEZI9`NT-lCBAs3Sa^jp5F=+V#LT>MZh;4ErKzL8%qkc8 zAZ?M0y;VEzZ#l)hzZUIY?5VT|5W7`v<~VKbksXn$(@Yv#{aoNk7xP0#f{9&Yi*e{v zE9h@AQH1rtijDE-RdjDH7kLVAbAeR|mf8e;3J?z|5eXM_7<$dMOQq#SS5LaVaM^i* z$7Wod6?m*REAbc72N#pnvu(Pj7EC=>&f)nbX(`-DNkE``V*Yz$=r7x{(Qk39`>!o~IaH)jahv|Ja+F zfZE`A@o{WUN?4#Nl+`PA%Y9KQEruRQnTx4b%M^9(;#irRUq01+*;2TwcwvRw*g+;S z3wIO?Fcr^12WJ#uPWFe{QeQ>Ywz9{HE{kASoCp+P%bJJ{-v7o0fyNkljt!maK7NjY zY}3@o@-M}#Yuimtk>OeQzwvoekl<{P>$0G$NDA@{TIsbWNOw1EkfKAy8_KITNJ@c& zwqKkT$$4NcTBcU?GWOme)AfIRevB7#{v7;ik;mx%ApSfj^YD-3 zPZSp5{~P|ebhmw^xD}MB%K;^F0*%eE3lNQh@e~fb;LmfH)(v2-RA&X<>DV4d%y1?u zFj%0%RCjsSXOP#R0JFB`kD>qr-K+!seKXMGGX{FF{8scM0z6ELcA$TpO0!-xD@t?x zX=Xe~g05r6`jbv?ACw%rB&2iPpOM4cuV$`S1N6Tu?Asa8OKqUln|1|M$y>oP*HbZ# zER`tT-#Y+Y$mX^6iuQPfC9~Z3p6E@#c?M}r^H+oF*PBFABPcvjWBUGUsy&wH=HfOd0`;CCjg^o|{(c`#tY1$#@$6l$| za27{YW-BvdM-od-2r)C*f#u}(?3rh*XJ@G|-HMD7Ut=bk`py>n3u6Do`nX{_&_0yU z+9?%@hp1#^MXKU(3}FhA|g*$u!eSoW4m~{g5wtn8>?YOT#Q6EH${ZJwg2UD z`Ub0Iy+&sC;=qn3pDj&fXr7ltq+to&{0)q+xBpapW{t6WP|4G6W??OMzR@Dh;8(0Q za5C6y+zWJ_awLRyUzn%qGz{nno5)76#-hTQ$cI%SYOs7y>kGHWL~scewy4gem4p4- zkGv`keE(PK6Ka#*Uni_V^WSdPEjAK@Au#Z$eGcrh3u|{lXmdrd3uc&HEGBHTx0(*% zaPfc{9#jG)j1C}dA~s!WvNL;paQpw?jJM6HP{t4&(*5%o-9MYX z{Eg~<-|VYp+syV|#maxj$LZ>q&R-xpe@pCFp+RO-@KGFfTAEz2P(4UP{RxgH6v!X-5NAI8v zHZevZyyr_xkh7=ftGm_*7Gpyue2l}DLf-%4=c?o;xvVrr@%cRwVHYgtElSy+h20f? zD15{5I0ncl-gBCAY$&j8)2!vN7XWAG1Mh>cXguCe z&i#@TxAkk-{EVEtq*Yy-(~=EXN}QC+zd`}t_I>|V+Y*KDBJWXvUnd6@a$4xb_SW2g zTa+V22C#Dvq7)Xkb5H!e^g`~$57hUm@y#{9e&ZX(LtCWmHNN8<hw^$mx_;SrZMduVBATB%y*2kc5Id&-3B9E| zKF~fY*ztFiVas!yK@f;x|0o^sb1@s{7VJp}Jc7kY0=m-yf6HqN1Z+zO)bk_=0h`hR zKOL;M7p5wK;hHGeAs)jVD>pFgSnJH2zQdv;LHJ?QH3-6VRSroKkZ0%^*r z+)>gnQ}-#U`yG>0h)4RJzi)pe9y*VqvA%s+ zJV)`Iz>}0p=31RM@Fyj8N|~K=D+RTd5lEeUBoH{xf^Y0Z+=-<@H$MwqfhaRgHopiL zE6`3U-hODRRqf~YKjt$IdEWdnG_hl@)zw~ZZ}7rKOIQzK@0Z&rB#Z(1GC?3y7sK6^ zzzwin0G&9=A6F`O^dGXS#|`Ck9g(MrJb7pum09$2wV-5I+aX*<*Ws-068}5$X%}w~ zX}b1E!ai}u#kF5tg1Cu;bkB~DNtf7;cgOF=wTsUVdQ}Fji_w=M?E;EKza;s=(>vi;sPxI#)=!CU}Aqvl6LWlzsslZ?TilvZKq{quiPxDF3&LqnrU}suJ{N( z0EDL)KAl0;$Hd1t%{xx%A25p5Z{avar<{^5s@}&(5O?wJp@c8qI~0GFj79(3eEN2% z>;5)`%bN~ab)zl(r%sW4pCmuUJGYB>4V`OMy)oD7lS$bh3)-8Gylqm06%@Hg3nqQY zsya!)PU)X+!L8gmuK=>u_Zn_Sc=7J@_#DjRvtK?squX&Mn81A@>9M|6KK(H}mQjV( zcjcF~oNCHh+#_XZ_D`jZ4}>cGUdo8m&!3Vzeng5mKx4q*xc2!jJmUmDdOu{vg@pFU zKgIp%{>~xD`_?e)n3mTvEkE_9<=m;( z!r;i0L3gx@VUhOV?9RT38;^H2Rk$@*bN5YO14eK`csAirS5hdGdAeJ3?n%V)74Fgt z_}x_D-Yfp*3U@*FNhvjdWVt&!8$>J`gX3HrGNtFdgXaPb#r&&;j+0OZx$=Di(&^z+ z)%;>Q8<7_gHjCOdH<_3Tm0K7dX2X0Y;5`sXq4{&5*9++~YvC1a9p*4C7mgb#5KR>C zCu9Nv7mmA5g03LhoDb9m7z=O22Le?JDl$>$@1<1mvzo~wO%MAcXIv{lo3T(POxj`;e3= zSwN{d@AIxhT06OzTFYXjt{q7M*rJv)u>*S*;s=>F)-6YV+#XXX?s)g)tvjTvEx+n=xQh9uWxBkYfO7{0Om`#XHYw<@DgS^qahlGctR6f}AWA6Z-%BydR4 zH{vEm^-fa12mi9nKSI9wBf+=@LXYTXXmkt?eOb{6`Ht2oT_%LobZwW9tRyTBkgpFU z&qv~teH5G}E+Os-AsssolP)2Mykm#Bdid;+hCwvD7*AQrWm!%fk|cYflk~_!7>7z$ z7x`P%tt6Z*{oN#~d7nZPWbDq}Ec))&;&$cMWs-NvuCZFCUY9W730W2mx880x0o0jE zq)8_fy++!j+&YAI;b+tA2SRB|f@P!zrb8*AQ0V?EXDSH&1=Ho1x`i)~16=>`DJEvh zHD1h4iIFbslch2BQSuBQDJ`2P{CxH0MUo+8eISf|^_3%xkIj}6Xu4dM2t%1==_Q%j zu|k+eE=JI9?bWh z76HuagJ_G8VDTBgK)M`LJZC6mtX6#d*}D|H^t3BhzNddlGfU5c;CO zV4j4-`-=plzu=qVn?|EYl5xq~dFmdK(o##E|EvD{{p*Lqk%L`+xc{PWKp~(o3-d?7 zPPGN^e`g5Xz6AI$aYz3hbON263sA<9prUI@!<2x%BYp%LKm6ujLSQWDPF`s?56V{N z-$0B+Kr&$Q1TBQY6aG%c7BG$!H&hCR3l~mbiXS82E1;KiJ|vs4=t7OnUf@klOaCmC zc;VL%QdB3!vKZVW)Caa)b__y=9)LrsdjLom>>}WG<_xH!eDikz<~x#;p;-V>bs>6! zjXlZhQ*8VyLWr)@Tl^+zb%i7Y0qR1}5JLN_rT8xDUO0P*?rdsCK=S4s5-?|9q9IGK zl@NxvlErJ`Y>8i3LzFdVhoq{xL3!b6@}1Mdr&6Rn@ZHvYnV>8#`1S)X(|qAlmhx%v z&n(-denavLFF??Y>oiD+jE;-&1HzyaizrpH=^;>y z+0H-<|DC~Nv(Hu*`#s{$V6mk?2D8{qivbpU<^YTR4M{1xT5JAkrq!~gOcsyDo(Ur@ zGJ<6?`#!^C=L`8#o}2aZGd#An><-DJJmn0T`kpf*6uO~&H4M*eXn``;OxI;XP>cu2 zW}lz(NDLlfrt^QLqxvT@)B7kbE~~B}mEckw#w>+TN**iUAm;XFLLq2z!8U${6*SB= zL|mlN%f`@(ZefyP!cwl8X%}NNzfHO%Usf?#ZE+IlaoxHun?RiN_VIW7DsWn=t=>ot zRJUvh$=MPKADDLCk#-R~Usj4`<5*snysL$clPow1WaUi-o^KQr^fp)OKBVYB%(#s` zRitXGJMmgB!HG7GNTEaamcS8MYS)l>~|4hs~Wzoa=6X#>91XQEbt5e1vyU-u9p*o~)8@VNbhS zMe?m)Sw6aC#)*Wf>o^V-=^_iqCBl*}sZm%;4qfmGi*2~;0qQM+TSO!9xhfkGAx!t> z4gapFy7*0>MC_Ancdd}hL<|G384@lUdiXKj3Q?p4kreNcb!Z3lAaUO_MC@Q0PuvBz z?06T4EZIARskpBmnBFD6MwX#&;;Nrj>TPw&7Mmr5g5y#JQn~)&d;d*(QP4Wh^Vg6J z=EF{!)qmyd8q;5}(WGGU5yrWXxYS=aoh?|}m)mU8Q2*lhg;P9~$L9>`FN}q(<9!$Z z+$3fNU%dAmKFR`Wj`w|dx05#^9BQ|aG6t}Jcz_&?Qk`td`z~K%@*|E&Z2U&?{6RC%4v_E z`PF=j8yV`4V0Da%6>%fiiTgQK+K!AA_cN41xaH408FEKY6;Uy2wPO%Bi-Z?W^ffbM z4@Z25!tU%bsA#A>_-pRyF*w5{s_-4UMPeehN?#-H=u({Xh!I&a%DI%LCSfv)5Fso@ zjJ$qy4-gf6HaFr!qusTQY=0Fq3A-&K+E_K zMQ0I>W(w>%__Z(};;5{)KN}=lSOofe{5w9sU&10opq-?_8O+v@*+V4+^sR*MpM`Ok zf_#{%drtD)n=57R#w+u5;f!1{V7E$~3p7R3=3WY^Klf4&7k)fsahP&5uIjX2r87-0f`D3mxoZ(}Q zR$ks570f_-MJtwO5j+Q}A>un}pI<{qOTWG&0Y%x6mxYLR;EIK$8XlgRHvcVrhKHvs zzoUtlf>+XS9Ar~NEX`#JP*xstEpmC4oRfiE!s$Rc3ERylwHgSq z#dlD`h0R9(gG>2a81XJ)>yli_EGK*sB0p``0i-I@xTfk3~04lccp5`eU0$4-5My?RteNK z?4T4U%a?8p`iGA&0Ez4{4l>aZAj(cI1JW; zq1kX)?+KAuwjjs2BhIgMQz${X=^&w(no5E=M1phG^xb~a>tP+~XKQ*53VZ1@g09aD zns*=Vo=1yBQiu4Q+(88fUQygbq-JES&aZ@MYmgSMK|*!YLGuL@mqoHA!`qVKRxdUp z}kZ(nQWE5`a4N|zRmlaCoEqB0cenSN)MHe8E^~59HEbbzS z73P?AdO;hD+=WO&RXCfL!qQAZ+&cIa#i{<>P5-P!F4P0RI^CUkp%gIsTKUQmo{DD~ zE4U#GoKS9cV$MJs5vu6XB=KGF8g;@<$(Finw8ObcuS+;YAiImMZ$8LnNFetytUKF1w(NxQ+Qx~&ScEqrn zPz)UJ%HfztF@FC{CdG)K^{|T~z*RI{nAUMVN-q*}n26vP$|0g+B_FyJzIyht8}r_7kYXJI-o-lm1gu2__c7Vi;? zqWt0+Os8xme zgM0w1Z2$X*k0G&Kq4df^%E#VU$||BP!0ki;j7)O|ybQ9rdq+w_m1@oyqah2flMt|8<(e}je&M}D zS#wmfdGC!9@Syl%g8n<%=3qvs8CaAN`jj_+nA;UJ=?^nPtIlAAbi25p87Ev2Lj?4r zM*zk<;wrjCzLT%T4^sdSL=ce+M>AS;wrkoOK=p+~_!vb4k=_ZD^%?$$VusG01`9J% z(y9b=@)!wVr$azmemPm<7lIin=_TR>0))8G^M9J`^8a6q&O)BXp*4#=M&}QSDdBaD zm=ebyWO{0!p(MlcFp!4hVf=Tz=20zrK2rxQll}3i)@M?jl^6Q=|E(|^UPzh30bb|{ ziG$<#8~y#myijgb6DZ|sgKGS-gO%!nc_uLl<(%OV}|3->mg8N}V0>YsNX?a5$ztYy4C=r~7H6yb;vZ_Ui?_r0>RA8+ zArU57@18Ikj;xV`L~Ekw$x?6C@Y{V1fO6+(2`JtDw`X}&PI3LOAqbIE`MxRFnKqF% zLnTkuL{Lvq?F11}i8daM7G*rSB4PCL2hP_}a?P*5f4}I}l?IW6$ZVk1@`uaa*5x2_Nen$>07S1k_quhn}UQcyskP&c$1}ykr5&)B= ztJZ9ZUU)BQtvSL#EWDRgtXkriRSRCCdI!bBV5YY3D2?ff+yYj<>M478(@79QjzRkA zXq3X_$V^pAACQ?(P7d=)A%_nAB8n6l;1=CDS_}5GbnPY;^I8t*gq0EWLsNu-O8s?%n$@}GTD+Y7{&$DOoUIG@ zN&8p{K~B-8>$~`KnqO45Gw7gU%5n(Xo<}=mSC0OyLLpkVDLuw}fP2|Ydf7WekYVtg zWyXm}u9P%0EW8NeWs4(20|7uwXd0R*uwKg|*O?%3j`U)ETa{W6!yyKM&Xds)?JBhX zAR{0Yr5K4kNQjG9;BF#JHCc>Tuu;579`;L~iD2839g@xIOGE4yQdW(we19ltN&zUyH0>)XS?fSweEhu=2=aKjwzFvQkGjkT!V#2Q6%5VBY zjqcZ=UK2%7Zbaiky}&Q9P}Q#A5FzUOcQ+aofeB`hVc{^JOm7&Xx1R=G3{Bc^B zslaxIN`Y2$7z8@Ney)z5=def=^(6P=y~4SZfm-3;`65E*iwv0!%U%KdU0k#;Xw{9u z8Ug14F5F01ZaJd-X8#n%`c3>G26iJK~qu@z2+eck_g{w0Cg& zX(#R2rN;(Ra~m&{o;yQ66P>=l<<;+;|CtH~_9yz7%O8us#ZMEQ5q9ULTPJMp_^@HO z!hG`pC&>MFaKhV^VV|(pV2`P@ z7=s&KrrZs|2^)M{cy*S!f z=~+o%C&9b(8g?_Yvx+--O@UwE0h_z1t^RPbt+rLB7`Jexzuc)gCD_eraq=In`<~rW z+zIznlK(>Ot(+wpyGjuHX^#I_ z2A%2tVAH0+OL8$ju>HdTb`K-Y-GxqF-qLTDbXsmZ;anYkqK)6;gLcxLjv>c?nF%2=kr|0ac#eI33DspjQ-yN`*UGTjFvaX{N+4)xG$Vj(ZlZ>iDkj2 z4t=9?`}dDLbL;v6|obLQPkfCu3NX3@5kL_Hyr<#&1h6 z8h@}4-lK-MQ+@Ct){t5fQw(OBZzy`Kb||y}Lu<`Jdl$`pEaLbAP3Kc$V0#~p6(bPej!1mMSRa@=RP36fAk&+#?ZJGNwW8D@D z{9Djnz{ayYzVzr0ZUFO&iCb_ON4U!05cahtd$8oY>?`FQo0cR4Q0#$n=%2RQ z&cqri;A$zr4#mUnO*zuvETqtr!lqkKHO)KSgxP}LQM?qX^-I52#B1NJvn zY2uG)-v!+Z+uU>;_RksC z(SiEC`vZAf2U?vigR!aiFFXLJ34rd+JhN%=ktLXAD8ICRpCuNpSy%)0J(O@X*c3=g z)M&~t%{$(dYJ(|{HXNUzZBWxCVyuBN!iciL9dCgCj~HX2K5c?mpN@Y){qCXm8?yY> z?>kzW_f~1s50Xurn?KBn_2$;^>dEV9!br2?q*k}N_uFC#&7Cr0uG%2~0zWTtj3c+L zFQ~!>`Qe%D0ajc{A~Bhk;O|Sc_Z$3e;_q>~RNjEN0k@bymouwW`&0AZyvNWe@4sQ; zz1mDL)NsHws{Y){!Dt zDcr3W%5=Gu>=xzO7ZUqaVMtoxG317v*~pxd|&q1kG_A*F}iZ}I9( z=qb09-HXf@8{R-NI$yPqH0%?X?+x>7ib$~&-tTFdSZpbvpa*Fm*7l|NusixG+TfP@ zc%{qh_s7D1=k~SRkLw)TzBlYV{1m2^u1f~C#{<^$?PAZ&DJ=}U!6y1E^h|OqwrI*R zXBO*W+ViZI>t9DRS+_$g!pODk5RdbDLF#RD%T9-nU_2$%+?X``T+iA95bXrhI>1pm860a(_ymTb#+f3jLZt;4C{CNWPUC+<>@j7vEtgk$|v0P`}QD5z&JXOZ4yL5NXT`QuY_F5U%`mhh6Lu)66erY{^ zkeS3|0le#?b7W?|wOn3Fz`ECwPRz?BS!u3Vuu`_of&*bh#Ri`yv{8s$o8PL}o zN$h2QY`UM}-F{SQ$@bm6y~$9H@P<;3ICa!=$_kU4%d6V3;KC4Az{p|3MV;-v|3;r_ ze+7AT@4|p{UO8B#6h^m7aUKkOr7Pr22=S~0{fBZNuirhtGnU8=`q%}(vMXdgzb_E$ z%QXow+P{x9nDu?7pP0Tt?4#U(?>&skycgin!9c@4nW_PUv?1T=fNw|0o?v*p^)NksFIFn#v&q>5i!?i37*ux4~!#oMCWNW`0P8v;#j zrA=@2UPJcqq>5FwbGeKDPIi+dQ>bm*)nD@=&k! zJZ~$uThAX6^{wLeh;!d6Y)mdUy)Q4;#B*C zOYiS_pBDPNrc&we&-r;N3PpteuEiby-ZvzC%8yO-a*6&M6a6cRo=G&kX(bkwE&yvj zLU8bxG%&?~HK=L(WwZIUva;%?7=Imttp4W2C8FabGr@e5%^gWE{*y!2mp~3obrxK^ zT-4lV`5W%qaM1cvYy4a)JZRmSyQ5KlzX{(DbO8h1-n)TLo&zJ_jRM_^Ul#$Aw;sxR zpzp&Om==041x%gP_=X492xC9~?C|_6^(s7vtUJB8VFj*(*09jg_yg2;&?>Ar3WNod z6~a5)fHIc&Jy31|JgnA~3X~riDE|R>{6cbN>bH9OdZVP1q}=ui-Ley~Ynuff>~}qS zb#s;fg|Ji0_Uei?0pDv_OR<*!EyePLxb7M2&ZirW{EdKH=x<1Tdx{wXjia?~UTa6P zx6x5Z#yZSqvkt-dmtrzE-GUb$$!Kok3p7;Jp;~vYe>V1S%GhE z8VslGD2x?+EBaHAInZ!YVJ#}J+6b(_jA~crH}uv^FB2)?PWMs?xUVa?+Y%!MfwBbN zlc_QU-u6TE20%+;cLNFIa(f%NR3wmhXk_9_0sr*@@IRjk{)hFM;M2l}6Q(o6Rm_5d z^HKmN77-!91xy0!-tP6}MFQG#;D^dJcbxDFkogADl|ovm1DL$t{2~LsMWA7((wXip zrZd5TI}2tHg2pt3R(x~wL2Fh8qyJ5r9)qpA)l0pp`Umr84SnN>$tyQ*p1v?0ZRZDL z2l8Fn^D*B;_S4tn3&^W+tJ`q#q)yi%UJJ^C9L0ZMA#-b87vUygBLPlSa;Ax?9SuqW z?u;SH?H}4Jn~8ISIS^Jm`Z8|j&l7F=Sy^1dCYi{m#`xMgj@r?y@bWI(6aPUZk6XB9 z*>?0+Nz#6#%Z?ru;M#bbmUn_Au9bGGdN5xf07%#5#)g)J_SKyGycS#20$r?B| zY)8iudKK^6X7Sq^-AJ5tS8H^S=W2@C?n&J8>nDx;?)UtC{Myk^_@?Pys`ZW*u)W8Q z)|1I`rE<7JXSH-^$wB)qYx-%pVLZhxC0nhE1HKk}br&Ta+2**?kdh9&)0%#OXH%zl zu$oBUBc}>l&$BI$j+WB$eZKWaw%IFZ;PJH_>9ki*#O17%_F>3*`sO1Yw)-X?w=`)z z-)cwO#T{mVU)R9XcC-zLqm8zsqsZJEE#jMrF9Yq77-`RPsYFv#ZsR)brHY+ymI=`E}|8Ct0Y*F>^b9VPK-{?&r~WW8X>MpiwL{XE-{{Hx0+e@S6`D^CU`X|`Ve2s zZKgEmX(=ssVw9spG$|@gv)pGTDk_*^N1OQuoz>EaRDH6Ybli4AQ1EVuIL}IhL-wbs zcu-FwgZ9Vl6Qt+t_3?)iGH+|I2slGUT%E@q4eR+WY&F^K7GtrV|IN;Fg&CH2xhuf) zTDCu6>_-cWDyFNIv|l-s&2s~Evh>D4KZpw|#G5Pe zNk_5CqIKm!Hf0eUUiyP<^Kg0Ct$5R0w^QwLhUNTFQOPUtYJdn2Et}*SQg)buvz%7YHrd&5)AMAekO*8 zi3RU^T6HvWWi{#4NnmTs%mR}$*tAZN(Q#$a9Ry@9Db=RaY>pUpS3Ra@U;55BzSrT;Y=v$ zTo2DaGoNG}{+szUKCbiWnnCl)l~yvR?DfT)nOEFeu%6cm9E;}`uea8$Pcp-3M8?GW zdB()rVnrA0q>?^yqB2}Msbnl=QU%@b_sG&M-Qce7A~b%0Jqa_3kn~JC{9t+}xoMm0CX$Xd zd6#Q|G|UTFLO{l(a}+Ti9P(HSJJYjqXz(!);e<5jxQqDOuDG3*+EL1dV2P>6x7pT^ z#?zM$OvLAPB8D@virZP)B;P?#YLYnpP)%6rMNqGg!Jt}CpZn@OIx{xo*GdBbs zS6F~hNi1Yd=N*c6cj66!k^=#_iNK4pwgrk0aC8uKo*hk&fID$=Y}csRu>$Vkfo0A* zVHwi%C&bx9P|j+WQd6X=GvYkmPOj;0(cfc!ZtjYJb5Q{CdhBD70UTzx4~N3pVt+1M zrcm+8fV~qB2aT`r5Yh9;C4x{6F;3z=ARB(!_e;`G0u6h_)9^l@B#$2ieJ29;MdiG$ zSI!B?k0WN`4*EKiZ&=a$6t|TEDzjJ8W=(H%R%%BmSL6EWDP?#jj&Rl~!!vm#58d`g_HIxp!T zjHTMTx*HnRyKF$tm0o`aEzZ}FAhiSt7DDY1Ht=4h^l{iN`Vli)Xb&NRQ5=Td07^*x zoQajtB~m{s1pg~&@R!j#H|RY5OF{#@k;rMugzgG^N5+01YXhSKjmhk#U!3Ml{&mP5 zcTq*v9+df|!m>$ApUtX0Kj@D89D(Yq`GI5zmaMy#__~|9<~61~mc-iqvzoz~{Bp>> zf+9XDE1CSu+AkA-iNu!?5p=Jh7!z^9ba(RSQW4WiCjYwT3tGK>5*d*kL+_cIT>h*q z>9~`)bx%?Ls`ROd?<#yJk{j45R+Q|wq9u&IN9laJ^un2FC*>$JA2xhWQkMyMX#k(3 z?DxaN4bwy?Pl{eou=V&t!3Ldaj&i=REBfoW!n9&HIC>JIXgK7YsO(*A<(3V1FR6w7 zEzzBf70nW%PQymoQhoMfgSS4Mx&JykR`*|pJLM_UXgfb)+g-trz1@C#9KRe%@pyDt zLe{-5(GYEZUdh6!b9_c=c2?8dp4f{05fRQxN#)MS*6r4K+`P}m-YX7Mjz{)e7jhm8 zfzi_J=sZFrj#iD1Wj)m&-67;m3Uj~C&H>r)wyQF0Si1!mIIBKtaiUb^)$QGoJ zK-q0vPmtqEJ#IOKHBK;=K8PqKNQI7ew1+^MC;0@~(LBCJ5@NniR2tnBb2P?YzkRp8 z^0$OIu5m5uWj*nKFktJr3QJVlYj$(QK^>=e9^tri zcN|wWe>Cq52m*Za%xO8R95qjGAx=kC(T|@Obt3A$qg;5s<=e?%d&G_c!_wA+6DS zz3{|&$YX^6()66}NH≷C#ge55^qSO^u+kJtaG^m2?BZI+Z!Q+^D7 z$Xu5&=jo^9#~q!6lrHG36Bt?1q%%yyG(Wa6;$D$cUiC)U_coh9DQS{oRPDvVNvkD2 z>JGFbnV90uf`H?1N?a9Yz7v_A858SM$^Fid#ISVQ$xX?X(jG71CMW+ndvn8PIhnCr zbWu-opf74h$>qvtq4Ken$Sk|noZA$m+9GNzhb0~gh*n5)`AT8KieuKAn6PNm)4kNo z55Nn`Myuc@T!t4E5#TI#YQtOsJ^uX<1--tBcx#p!+lCDyT?#jx5E=(E&`dHm3x`)v z2DVj9`m za8_QALj?=6WqSw@n{g9o=7GzxutLv_T1$k^DC8?RDRP!(_$^;s$9)CRNh+qnQ}QDW zgPEWcy4i?GFEAMdt5sxO3cV2IWOU73Do4D}Zi^shg|ED-llK%F*9k^t$$ZfHbC&tA zLg#~2JZL_c70Hz{N@vUm#dzj}%!}fK4ZG#HVUv9I7_FEyRNP74d8qOxxKd|3 z|B*nlCAmS-|8+w{g1#OrIxeZ5pnZ{J`ofS2kEr^z-AV1Va8eP$ioOc=oAuFK-tvbX z>40j;U&$&=gwp%Bo~ z7t^lxSL{LO%;Oz3@+`7!o;TVH=^ za3iBCYLdQvL)CK_d^hv0Yft-%VM?T9yetwju#1i#rmO*D&Xjik!a~kbr7Xl8@e(Qy ze}i8m+|Vj1*}S_|j8?f?u}a=7mDi*4h8ab{bP;PL$#h}GX^Oof2N5uz{}i)@kNd65 zx#PS_ZWoff&kAGj<}id=wa!?aZY=J}ia%E@>dP1X;d_YjTqZul5cD*rOXkp&wkKfi zwQJJT(>M!E?v9i@sqCSTo$F4E7X2jFd@QaKlQ(mRxzpT5_w!bBA#BDy;aBp0&rtR5 zDf34uZ}EkGyC!o7g>t9VwWgb^usqECmgkreSFA0^t~poI;C+cVBPOTQ*PJg=PM8b9 zr)^9#YUD_hsBay+59}IOC%Afaf@|OTakxIXpaZU^q7JyYA1@iM7e^%E>VLFwg{Cb* z%oMvBjrOTY>?N#3(zjthk1dk+0x4-N{SpGXnjq)7$u&|9OgTOU#d&gM8kCppzOo3D zwU8t{;v`)DI4`-!ns}mIc*^mn>q_lBF3Np{`%q0gucv9xza}d!D=pUI=AOp%GP`D! z1XJ58X=VVE#WA+u0Y2=d!A`VBm9?%n90qUtk$h zfGeiU@g%F5#{F)s+-+DCu;=uV4k7cSbh9}-JDb-Z4R@!FF`*ffaB z+jBgbE%x9BenNp@Xq&pBI?C_+VWS!wohDd3eT@QOOXJ6(ZSB;e&If!9Qp z0^N;+(f}_zUMRT^mMFN!T?-N)1*6jdEc+}IN&~K<4!B-{Fa(Tpi&cW_IrTwhJQoPR zCYgfv@TZ*|Iw^QooDff=Ro&OFvo<&ER4sT)1iJD?i=wd>nv^y^<@@JJlNSA)*IQZn zM3d%S6RemfEh?9xm6QbR`2%z4)|L_HWd%r2&2^m6FL)9VO<#GP@yQY4Z@#3|u1fK3%i47VdHLElVqKFGm?V29ac8JenV4dyBL|UGuLCyBV{DA5m z0jRY|3<$&HiXB9D9)>wPV`I;X z_n1B04~uKv5!V+FDFr|a42A;D*|{Pn(HDKCdmeIFVUxt0kxK<g|KlPF0C&Ta6L@VIB=majt;K>PJQuvIx0n9{Ex^LtuG#c0Z{=;)F$bR zG4^~V^YVDTVXzh^K}TPdMaF4;QD)Cq`hru+kh;V47Xu{O71uo7>x*m! zUXs2z1m7WhMPKZO<>KHa=?lP9A|AK~kZUcA%8&<2=_!3t7Rgik0=SgE&~W_TpWFo z?dXd+4wI~5dAQaN(v|~~rE_O}v4Z~Tq%Ri0zK*_lQrmRd7bokB6oHSvm~pyla8D`v z0cvTt~onZUnKZ@5#6Bp z+wT3lZ>k>Q3g9F3MXu5pDFSI!WUSH`35j&H`eKv-o1`z!7GRaWDA2%Wk51JWbCjS* zU-Sf4Av-&xy+DIH;z)gwt@OnlM_;Vb_LtHZO6~k7^@S|Q>c+pg00K(xu`}Ur-D3lh zI=aW~;r&6A_hkR#JfUn_;4p2a^!(@WFU&gAjc2Evj2}@fIDg@Ljk8X$4s~KG#GkGQ#TZ<)uUXtf~SG~lqSP@BRcyR z=f(Yt;!ger3EICn|KIR0?(M?AxR1^$OZG3mCvrvWi}9y*h}yjg_X07XNEsb*0lka} z75Cz7WRK%sd>6yHTmRx1{Rwvbdx6jf7l!cgw78prQ2v0f(PsV*%+z#}Pe}`e*11R3 zc^TL^!u?oI@0CT9)X5)UOGlmj^6MSYzuVz{0RC6BTooQ1d>?!pS31qzyB}i{aCPT? zd@GToMId*I8W0G*4Dg<_;uI@BUWzwzkVa0?E<0f=#~XQbkU~Ke#=(R$a*;iMm}Z~B z&(rA2!$7(G8Qya=(Y4~abnA^Ufh8Uk&Pq{SPbrBWw6^*I+(goYfB>D>p6a5EQJ|){ zC?x>vsGLH8bzGD;6D~@*UDIEHjk_qK{{>21l--}#MJcy-2STf%iEOs1trq}`+Cz2e zp%v+&+AKU41}W=@O~YgP?GYYJWrxS|G|+VCvD^;HB#Vse5FuJ*j2##k6R8@gCN3;Q z{yQGaHxM-7s6CcaHsAq{TuF5FPD_x>Swm~-3eT|+ey@bM`y;TYin|U6=Fc>LvO; z+T%;}XFfweJw~r3_vc*1h3?Oqug3cm{E-=29US4$TuWCTg+HT+Anwl`t$uQK0&Wl7 zrGb0zD;>aXg~8&$b#iKI>8+!1YK{c%zezuBrK3{x(^_~mKK=!J#$|VheoAs@9;0V* z0>qv9alRHjxHDQmm38gU+@e3hZ&3P)T*K2kG~Vza$)7_%ouZ&m(ofk6dgbo8lAur0 zPo3PItpgO?%H2`=scU!V8OQ`oJG(n^Wrt?{5jiyEpHDx12VzXoPXPptqn|F&25dG1 zV9EMP4|JhiPgQkl=jT|Bi0HDoe(Ku$N$96+(N9X%9i@I+Kp%H1rkrGj`E2zNlwO?4x640y}8;enXhg?RlElP1+VL zxtI64lT|wuO<_v8hja>Ye})3g*+qpTB6qqtBqL{}{Y;ut@EjqpqtlZ{-dvH9GV8FK zS%;qpd~D;>0QLvKXw|EB(cShlg`EK$eFT6d9RP~`huNb59MlDXeLpvVp=r-BV>8{I z@T2N|%9BzHbe4)IrFK`g^zGQs%<m}YCxc1f(X%rxZqqI)Htl6UP?I;i;*&MEVNwQVaoM%C zY?aSFPEWxwD^ce;x1HlLtaWC?2h{O4a`1TQc2soSuhZhQIKw@ND$||!0D`&oMAdHD zV~}=zb!QHLhqe@9P4X7_1SL1{rgCe)cubCOH9U>Mebb(ElI~+>hK4VUe`I~E4S9Sg zT&rBkA%!WUIT9SoOb?q+uVtz)`+b?Psb2?l!)fqd^nx3A>Qvf0 z7`;}3OM_oagA1sxdh1X_i-KwRCp4!oTJnq7uD)6p4BjEE=AOD7C?T0s2mL7xd6ed3k`R z94MxImN-sS-LR@>jJbbSPL$#%XWD0KhZD6}WJZN=j-E00WJWK~w{ssBZ$TEfMXPe^ zJjb`&B>@JuUWIke6G5U6$>HLP#kGhlHyD>ivuDP3iL8^Z+5?mL+}TTcefM~c@DD&( zjm#0ZiM|kIaCPfp9=gRdYD8q}@d&$CK{zW3;egc;zz-Q2Dd`iiYm^woI!}*ykB+|`6UQk9 zv~cc`pj~4N$Uwn z(BpmI`Zvb=yny1YCrF6Dp|g)u%u{k*up(uWWm$tqOUP?{du+mI04gLcqE2<~NZjd{u@;W_s}=EpzH307=jgh|#Dt zm47%^*Be9*J9=r*J%~xF&!);zy|Rm#`1m30iU28^jDe2fs!69o<|L(|OK9Uim# zCDE4%{Bh_@J=lB}&8dd&5-?prZRM1M|HF+N*Q&(=!^Sw2Mk}}9iy&Nge`^*Ew_ zP%jYkMbDT|ay#tgbDsf9hh??HSptb#g>lM@eCX>{bPNmPw!mZXN8Z)(aX*yh$-xR1 zgx%J^EK)f<4QLgxGMI{nRYP_wRc-Xx{P=PLs+&i3W$vPobew9zX##NG09x?uL<jX3((Q$C_FrwCTv^Q%X6++>%bFVK7gHq5-y8)Pf2v^OVX{Uq{UUsGLJfU z3(dmt+ySLo)Vdl+vs_2Z(#Wy~=C`!L5yNvxSy|4sAxAYu(G{JR4QQc*beW5Rg0VYf z1nnJbW@cYB&Clp0ADRZ?I~O5=iusXN84oF4io!B`6>$= zD~EL<;&MhricX*nvWJD#Od>QnYpg$hhJ=oQHv_9aLETr4ug@lmC9!(X}P4tKKrpeJ$wL3HD zzx92z*p?p36r4qs3_Re?T1{&`jetPp-wP>PO#^{bx+YeqM)_U{5#tzl-nKSRUhFu1DifllkyzFhtC1K9Qm z{qoJ;|3ts^6a^ysg|n67`sEWE%h50I!>--vmkqQUlKNC%;A7KHgC+ss}$9$$%8Wa&dFuSNoA)pT)V<5j!L!NhCl4?SYI;sg> zRNLaNeakH;W^EQP5S8HQCnTg^&Unh9UJBSeM&;1y(`5Z?-hk2e{F9|pQOoq$0kff5 zyA8wF(LH6+lKZJW27@vXJXbqBdY~`?<$6sZZ=&{o2IDGkp<^z})(V%OH#j8 zoZ;s=KG9!UF>#@i6kGhf9(6vXoIexw<#14!Z(W$JFI5|7WER%$+)j_N6UH7I%HljL zyWdoZ0~)E4sx8ic<*3G@6Zt8@{U0=*ek+Tfv5eQTFnF2!jAxkOEV`TYf#c&M0Z#fB z860xr_y$VQrd2cAf@bL-Ih}_I3lzM2ljE6RS%B3OfUAWGae{o zAA;YtMRp{)>Nx{!qr`?^q!SpOrLTXAqzGael+x2t`kfs~A!G50$dGA>6VvT^3_WsZ z4`n{&jaMtp^O5CX z{cuKC^gSapL3)*Nt3!Gv(;fO=<`8Yk`Qj_x<%^uB>0y~e-|cAe^L>$fQiv3KPo;;G zIw~Pm^zW=YSbk~20q|P z&`1qpKxl*pxHnx}e3cH_Kl60~t#o$LIU<{W;ENPBc9MgV=8IG|CIn$TBHgU>HoDoG zpQJ=i>ZsJ{sMM2GsTT8{YprbbbW?2xG^1EEUTqJlHZ!%_UqKTNKRhBFsByJj4z5XT zaU{N*yRLY1XM8sczMDJY`%P7`mj9|^_yb*VoUXaDDlM5$o;kBqTUTxd>l8)cAh}tv zR$LX25Ue+6a$v_w7XGYED1%;|l|i|yvD~#;se}!RWke;^z`Ajja1VXap%T6ae>*B+ zd|HZ1h;xizl*Z>!31;00H``GEnO<->;^_5)T4?e)?Vkj{gpkEz|Foxf&oATYv$*|( zNO5Q=fJhO}nCkG07OSOrbfPBi^hHV>eo4qxN%KXfDt<|jxiC;y{PI4H?o_%>SVt4? ztFTVI(j>K!RO{3@zZ_AmP)0Ghmm*k4O65HyI&+M^@8Prj z1v9Q+E`t&R)(UisRxFO58i~6)p84OR6Xm@0lbG3SWG-vapf>4L$=ptsRY)#JvylI!+1 zdZhBF=qso4M}>nm2mR}ATv5K<-K0Q?5}H-0y*EHZVoOU-NRVR^1W)YxuLzu4K` z;e_1+fV99hsV%TsT43;RXlSOcRki;kjO{Sh+=HqOP(rCaFt|#C0Bkh%W?Dg}coXvq zP8V$M)C!w3IZY>v6Yvwd=OcE-2VGl&2}h*dwXxjQpmfj6ikC9k+G{L6->hS&yxp%2 z)?xl2k9p2h_R>7jlE31VG{ak1Rf{p--e^TULowg)Sm-fm4IRc{L6M1PDc039YOEUf z-id@z^tM3lPmG|c#P#TbZHC2W*16iH#BWD)G2L<<=fs(+)LuzI?>)#70!$331kjp# z%bVk-q)bPq+&|KppH^xAo88K*l@ESloTs)SF4*J^TP4OXp`^UNw8q;9(v{bE4P!#9 znWY$bB|=c8Uk&#)bnNk1139%av0q96Y8>iM{bU_`;b0_@LDU|;fJqV@+9*iX{6 z7lFO1ecWYY_oqm|9hJN`X4)6I#1(gj7+aG`0r*sjHhA%DnS}xt zCUbtmEY2Kf7AI2*61I}*J>@rb%r>!Fq)<)S$S^>XW!JI3DP_LK@rOF|7boaypXe7f zdN=%4^T}uO7vqp|{`wB&;PBTNL{u02MNfJoTNxGhs!`zr#FuEZ+acQ1;zY}CgLw>j zC&u7?S%>KGc_O?OzyISO3Z4@9y-Sv3t{@K38ai78H1v764}c!)#PCS~9iqPR<6X7=TJ0CPW4(CS>eih}{=?!>s*~ zk@LeystgU%z?+h#T3O_b2N||bYNL;ZDH3h8@#A#GL$pzq%-mL9!RV7#l$6gfIiQPF z82np0w=8<=uhF{0e=aQQKI0eKrRxNdnuRd4wgLHF@UJjvs(_gKU^-*?9TO*8yX4Z} zeioPRPjG1t@OQ_h|DZt>m(s49OSjYh4wt?z4BG{l&i24C^)i!UX0@}CVFBDM{5n3F zUuD>edB55w_rNA^)8h7@jk&$r)ocJ*R>%z0~h;+PXIk~r;TT-}(Z?zHr0gJqnMAK)D z*C_mCS|Nd7ZvY3s9-o1qNa%NWJNSXX1t9g>ULk0uXI_HYe6o5^w3#4yVbbK&Ne+S| zBY6dm9#Rsh6NZk2)+ir|q1+ddgkg%ke`Np3FmnRG!2k|^UxyHN|H+CVT|jdG^*~I- z`|luKp45LW@NVb+Q#kz7{wue3$s`-N7bo|k-T=*lvOF$;c-cL&&Qs8SM5lhY6UtrN zbE-dO*fD|caHI?Po3p#r#L5H+3n9mHigU?_-)_PB;Hd+fDR z5?rt^i4q<@78;N~#~0H^BKlE@8ua6+UU?_dR(U^&@7)oMxC1Q^Ys=TCR$|iNHhRtz zGLBn}vOWux3sdp^-si-3BPA#3`8GNYd?zAgz;`@ir)zwDA9RB+TG+w&s~>fbub}6P z{N1em0L}Gxkz_xJ+vS=7y1=|NGO#dJ7k7>S=jd+^Gn^~)*4!fY5J#{)9Fq$IenSK% zv>dL>acCo~HJo7*-Z#Q{xQ=zYEV0WyS1yfX8kGgTug#F7LTcjJDH!liFuiOQ{QXaZ}9+r4gcJ#K5`K<^*4ace^5;Q&JP3B<1C*98><= z*H_I8GQrorM&DnPDx*8i7mU43kde-nJJRGvMAPChv{H$Nf8^pD*Kr zoGj}QV9ourD&hoPMAP#s)K`a|SfWD5=+KQCtPCC6_mWC$e@~(F$R-tP)uFYGD)g}q zO-|{rN4>HB+$WO7m95S-!~$>U`&$!<&UtYl zGL#Z2WV94w;qhj8xW>b8nOVFR_gAm1V9e+r?BMbV9=FZ~QS2>Ui?Xe$e>duYw z_92QAyP9LJ>{H%)SG}`eFZ!r}W-LBAzIy?aVkNQ}qq~o+?=mBXoUSxS`RIDYs*f2N zLp$ls=ZskOFe7Cg1GQXG1tLr20UMsYE-o}ylCJlibUmv?iS6s+-dwffbojLbS@uuy zEiQ8)E91RPL&o8G+`OP5!|#7c&5@!!3KV3y$Kp5kj~vJ51ZPKx2CP@)Vu35ZzBD~D zDxGuNrFDa8ZJ~E}bJ?&8`t3(A5ylVg*d2PSi7u0K6m8SR0mHob!dqu>Jntguz#z8~ zsE2(OkDX6?K+PT{#{+ZKdC--^x01knn!HP1ueF)CYTh`#Qqh7Pa1rykj!|TxV;+$& zbqvRxhN=&8>@ryaE+U1#K!dBJ zr~TIQg^399Zisk_2uCi{qLQB*(8tKn34{d%UdPMNX;l5eM5AdZPwt0r+Ng$`Jb`Cie;@}KfO%fx-z8*Vl1i#~k<-_$azb!^p(PO3VqIpa-Pct$xNQd7L~h;(h~ zi>ZTEtph@_jOgPG8{r9xKjR`r{J<{JNbw)RV~SO_+Ur!cELg<$0=%$maivDG|{@R_WbbfgsL$X-I6 z-&N;#g+=59E0j|4+slVY&s%$+! z(!`+oGlQfEmZ=QYMICIeC#y=3awI{XLF-`ipGbgB!xDzUY;?AWvjzy3o6ROa+E<5v zEd>!TvIdr({0WCVi>ztoc>pTbvSy`-kJSWQI)p~=i}JXxj~svFr)iTGA!J)C!IzN% zyWZz*YaKr=FUniSiShxGW;KaTYeY)CPpy(`*QSZa);3~V4)QX5_sMb*;DKGFz5^_; zB1?dK#&K}nTRba7)U@zflaw@>dt4`QN#~4FO4Phe{EUk)p=EbVFGLrqE{M164R5JN z->8$WN^bNrl2l8|chZvbl$N|Po*-XIf;=VRViEu^EMaNlJv<2~nz%uSe=P+O|1UK0 zdnbL)CSEKb98DA3lJUqUzAQi9#v<9eXk#VWbQ>p0HV>i$6Y6xOvc)#~7~&P1YJ}+B zCE#DM+8!Hlb4Gr?sN2|E`Tpn0l9taucE&agrGOl!t~6)B+B|U{$NUCj2lH{Oa*xCO zk~NIaZPNmTvA{oxEO8h8l-FOqp@tuFuMAilWLTmb33&pZ`8`;b;(d<`Sg-yQL3u)F zL8&4fK`F8^=wh-a7Ibl~c}xu#UJN63*j;iQcS?(VL>#x{iN&D+?(vYlq$1#b+v&hZ07>i5YCBG2- zuA&X3Y~0MCrQW!x!;!JK4q|v={wXr_Db6|Bi|)i=V>Y6{FOrun^FxeR43~6VUhTh+ z%SL7B5%qWkPMf=ZMSHDN6GzNDHF=A_n{R}#lg5Z<{NgX*gJ(6&x3O|ybITjTe8UfZ zAdjK*c`RL^@b3Kt@6AgkdFCoH+>;#MF2`?<&c6SOQ~SSY-~a4L`(CW+B>VmwkY0*? zf5KaF`@Xl>iH?2m+N$0=+4m<(6GPQI=-1C{-fITf5R5_-pR;Ut5hI6uLAFL82NRh+?*c%MH>3A{AUdP+5Kn-JL58>42FJi zvpo9wl)XRn0_4q68Tx?Q$0TevtRHeNk{1y zEFf!_e!)*j5To_W^9x4id`_dauY7PcMr*UtrP2BY_yrgJO*Oh$@-+HYJQB{>StNDo z7X;%8@>Q~5a5f2Fu3xaN&*yC7KgkD2)5KxP_=Wie13UW#$LWX^zaZCEO0yf+U==o2 zifiEL(=PmjpS_as59W%j(f&cG;WPb%xVRDj;3^EYqxBEEkvb=IEm(0CI%ZRq>yYpp z&Q1}kM&}l56RG3)4cTF7sjgjz`J2RE8UFBV%5|8#QMnHHD-WVywODxnmcO9Z=pLoN zAbuFr^X%MZgsQ`92w3aUL~?XcQNUtfvUBjNI1!VcGemym0>1uw!E%O64hCrb=6*3_paH+`z z;QH^KALvQ%*co{UA1JUNf(N&ukMbUdX1;usZi8Ez<^Sdf{%?NZX#Ishu1hhd^RDi4 zen9ViWKrfxGKX+Q%KU)36q*jUP#hWLU$?X=&6ALm9_Me#_*z!`hC?)v^-J*nl z@CBmu|9^hq*|o|f?aB|BPtsBP0ly_{mwv!p624qN;3CiGG*VBL501u2-R6vyn28%^~9^wmZr@(J?;6l_Dk9e z*&~jKI*{o^pGh-j+Of0pE+#{`AW2BXRf@#&o<4&Gg zmphHpr1OCP;`$z0ezgMGdSIBhZ~RG$@V_rxMepsZ?Pz~WF&*${E%UKfa$ z%xYg#z@oXBxoiN97O-9hzCZ=r=}OM=yQ>!Z?aP<6_qz)_yReqVsUZ*h_+AM5mRM_J z2M4$s3L9dr?ojIh{L+9iW?j1{Dv*T^imw%L;4NDmu#R zk>h0vR1cpOGYi&mye}bdk1XG$jrVc&hRH+<5#xIFHz#eKGdoRgA@RCi;qsJYyw=zk zpYlz5C7#VUsa7(`9%^5~MxV9TSFl1IPVRm250ZCb!DcJ?;xlsA13+d~)zC+>J}_my zbhI+#DR0!9vBVn|c=_UPTYmSC$wK=n0)>htW_`>a`THoL`03g^N`!;ddY;KoDa5|YKJx-Y*rs^^+v|ca;Y!Uy#;l#Hn-QcerB7>o*mw&7Iqqe zJuM#DM>ir;IV+tl{P(+k1$${!x9Qqz&O8_|dy}a)nNoIxDtnVRGIkcHW7K-2KaKD^ z%&kLY=6KoZQ>_R=KN9pd_A+J@t=9rv8e@GLwB8F^ZOq*_XY*lrYgJF70rfda!ZIZL zLv{IN@rPD;;;B2|U}t|ye@OYzN(cQd4)&1q9=)0AW&t;81be6!$aD$qSZllmkk8_= zJ)}RzWrC~hcgyX;3e8M!!7HY<#aFO}TMxXht=#5x443q{y%wGAo3x@im&G!ZHvexH z3o<#+CO1=2Qcp=<<}G+Bw!>|W%cz~SM)H|U{+F2|>Nh8?l@B1=SZhx!n6XN2S_vH( zVT3P}DbxB|7M?f=X|$rjaC5XW+-U7D*x=g3+iIvSe86W1hh+Nf+@5UR^Gt+VM`oGU zULoK~TcpNG+oT@ON<6vgOaZJV$6L()NWDkW>w0sdRXH+;CNN_=<@4ak{*yMych8^4 z_UVH44xFw%v7I>+NzI2*jqn}7#?G)K+uMO#_WQw~WjV$RW6Sz`ZBH*aF<6$x@7OZ# zo6qazwYGW-R{C6xG*fuBH7?v-(BLa*FhRr`8*Ws65)2=pwyMR#@FUXTswL5}8Ox$m zGgf(Rui+Lxt2M1nzJj%;t6`L#>x#Yao@nLPv9h(Gb)=o!SB1yc<@;#wShE}SymceI z1r4#CS^BI2Qmy8Fw^c3(lGRPy56-hwsM@Z!7v(5`AN+B{W%N;HmU1LWZW+QZjuyDqBXU&KUCYWlbTAUU#kAld4C@C zU$~}llaiM~JDVjEp5p`7S`}tRT3*g5In=~ku+>TDd2!x_q?8190NeCTzdnqq7jX&q7ZyVU)Po#aaWl)R=idqOJSqfA=%~7HCF_8gre4=CR1JS8=qg+l@uo2?7o4v%X z)`fE?7BXw4&*DVG0|R`nmA=B2(5rWJe~^OD8e9iQ+9kbA>mVY0fYl}5e(RNhwa;(8+59)exM|e~t^E?JC*&}!KoV-#y+AjIJKRRv6XnP=~ zaSC3|6dF37C_x$I=%1-`;h>7`{?SM#~g^&amxUOmBA{OPny)hpZ0p1t+ze7bm-&-D%m z=k%Ru&OF?ni6=Ow#b@m@_ivl%3-2QsVBcZ1=xVIflF_<)&jh{F&R5CiPvahwV zrT4^<^`6n#H1(eGm~`zign{ho{w_Ggng@h-C!g{Z@9)s?U;k9B$%`F>2n%r$5lUY8 z?S(GB?cS{5CKEA7IZh|7YEym2ReVUhWASE8`9v)CjPsX^{hRU1eibUxp+N^!=y)Bv zzg30ub*T8D3Z0}wV)IZ+t`7YXwM?jw4jH{vC`*SL^mpkxRB=d^@+mexwP)ziJ{|h0 z4vGCwT2E{a%6wmkF4m#9bx6(wBkfHcnoR!_YSf`UVLr#(>AYXPHK)^lb-2k`Tzbe@ z+{YE;#pS|o8U3kxPgn1U)w^50x7l77m$SGF*Z8f2e*1;A9&&gFnoO%{L=nm>#x;Uj z*fBl}mDq$Gy4q`bjD&pKLM`pew)JD++p{t$gB1;Mk2pb_AC@`A`28JRX?H=uwT5z! zFL$jiHnPapF(<{;=})>QHB!Za^hvdn z!J3svG*yq$b#=s_K|Jj{%J!Pc*-MC~&`&Azuw7!R3QT+IdFfo$CILZiw7gv*m7i)X zzD`=|?zRz;rFZZtSx2Y4>g8Uy$kHi9@R-13r0u;6N|2VAbtmD-tn1b9CHw-}b?IJL zqe{F>Mc<%)FIB%I_~r9!$g)vosZi11R=*~{wB%)phMjepiXW-tJ6d?wC}QIMHr3^7 z*ag_72rcmB=L+fn>rkdZ0y-|h{w^Qz@bVaGPaVP+geK}p9}iGHRY%^WBTIG8lXYYn zp;7kKivZhcj!K<=DKYBeyU5ZTiJ_Q_5-nCm1htIiVFyhzV$P;VX5URXGW&9V>B&26 zuUiq#tnW+otSk66ZO?TyffIivF(8Kp(MOYLdJ>6d3d%hMWjXErI**_oneFEjh$m6R zRjTNKiXGok^35vxYV~^&zkqWMshY%R-J{|sso(FY-;4Q8?Vfv8{P)!FH99q^lYXG$ zZ{asVnnE%65fMiy(RW=T0!DWWDxold)5M~>k^%b9kt zk8pNm_BfR*sp+Q@5t(%@zo|_>O~qfQvnMspbQM3I-_+)qtYeazU z;ke`ZzYalrosjO`he7K{e88icM+eGJ=*W3II#B+zj(l9_bWmPMXp~(71e(byDx@84|#xO56xmv>d2o+#_W#H3QO2?2XvXH`Q%|DBD3!2*XybS zuu>iUYZd)diH^*ARzDW&$0GfBMn8U|AHU_HhM~G1AJFz>c#}3M16F(G1!CsU!_+=T zPLPUWnCDdODG%?fJhgC5$N7`!kla2U8Fsg%yJ|TYqUCgQ8a3}@YDh8N=LgLk%u{hF z#QLH|H~O(ZWAA49U6`SJ*$SKEckR`2`NRdRA|qf`8d}H9Y!z#!YK=dKa;976n~?)0yFESM%9qj0t7f-PkVQm4sy{!zu(!IIaZz1exx%x z=-Lpl^!ObcgR|WnkXp+9u4R$zOibf|i~w?(eLa?8oj=r;Q?)k9J5copEjD)S>xkVs zNbEYsiN4+eBYBcC3bxAET>Xw^@N!VM)#AeQ0{HqKU=&P zflKm~91p#s4E8BDx)JT_R**w z9bvKhMr9HnIlH9Ch{$=`KIVj?gIW4~t(I>s75v1h{U%Vid`)`AP;ug5{{(JrF_PM0 zkgzma7>-?;CH;WQTbCm-|Mg^@rF!k(r{}ECre{e`qGwjJec|*R>4KgmE~y`{rCR7Y z5~t@kAp&~QsFBh7RC=CS|A4fNh~U#A$@E;*!|z&eEFK1PkKl||Gcu#qSbU$WBY2Qt zdPfkG;XZdq5a;DSPe%~@;=YWIAePmAlpimdL$L14RKX%DI#&yInd5pA`K+M0e`x%Ce8` zv~rTY(Ov!Drv3{#AW_#Jus(6>m+2PF1HWq<)Wuym0C6%v_|+*NVtNEzs{-vW1~}{R z)zq3-s!lr+p#MStI)}+Q^RLNMvH~AtDlbwp^S2lLUTg>U7iByoq+s`cI1y1H63y;C zFcGmrxX148PDGeu6WG0vO+=(2GKu&~B4SKW6_KBacuWR_?B1D)h(|d*f`}f8h!Q!+ z&hCBqcX7ZD^;Qx8&=E=GR09ef_C&nDnNKxrxs9GVRk|BPmPu5OXNqxsXCU@=deA-S z#5-6DVZE%$EKpH2kO|dugRXtdr!uFS@l|SS=jfctzJ>ghGqp8&<3wZ1c7vmSxR;=n z|0zvwV*BN*4Xp1IF+=6$gqOAyS&zyC5noT%nCTGx`}Z!zk-bizdAyIVMzXr%=1;OE{;q^_Csfbe5uMke2P zY9iA(EXO4g?KR%61I#@VdQ%``ipQAzp1f`6r)`J8@iqgm#`U}9hXat>+9n!zz9&() zd`dfmB}XwCt^EJ(Js_dox4uQSH|3CH>*kM*J66u0XxvdtL)}rkiG&_x*s#~QW6c_( z*EGu8Jw%VrndmpB)9n=id)pcbFv~Q$hds#m}jg z1NohJ-bCZpRq{e#-nvd+zQN0@@{-RBC(2D8^xP&{Yb1w6y~Ei_lR1{^@NS;NpO$zU zaRoo`)YCHRusdn*ch=FQs^t%J_?#SMcUU!iokWAR%H2#XWwvf62Xl~zU!)mZ_Ym<0 z5zxY<^+X6gPU2r`{~m|%T`y~$`N=bn=ZliagJmawB zpS(uH#G7P#=XELpu6N!g^Wp7e+5xIUySEA|hclYlx$4w?Sn7u64$~6vFxoC3l0^z^ zb)cXOP-^9LtSQ^wAlMq?Tj5|0$s{0A{5)j`+&Y=6CN=S-CBX+=;O^@ii4e%Y2Tp?V zZRjWfGH!T_$QvY;_PA}GbVztjWj}i7rXl=Hh6|^EU%K?d7B=17e$x{TzNS z1ejd{wZGeq}mxJCV1@7nF_!Q+*}f za|3ZgdUw>0CXs~0WRRY%d)rOml>X{-Ihye>-8|(T53To2Dt7>^t0kB8`{coG8x)ju zN88|ZUFkdEeanXvjVc=KFm&+Rx3l;Z@|&_l%J~k-pJcqNzH7_)NImatl5c8B9jQ)Y z6^WhPAFQ|d66eF|9^V0e%E3YoT{|qjeC=+2zDw&1p&zCtZQG5OXWqOdA^4B@vVQ)?Y7`08xR;+6CEi3d+$@K9ej=ypwKPkSB35p$l{oon zi$TD<=|Kj0gb_cXquV~>e^IGqOs`k$rSI6W$YO(jYgN$AlbH!?tLDKz(rrZ?RlBe6=Lw+11zjnLaB zd1*KrdP7u{!kN=Y=ObGoe3X_kVKos~O04LK8=!8fnX_|^Mr2GQ`Vb~FKH8zw4X;{j zg$quBLpF*{g@V)aC86J>jv)@5rBd0IIfOu5X|GaI&0~OE;ejBUK7e;H5S1q8&dtbw zkzbRW^hu8sz)-Ne8SKQ^5zR3{q=n=MTdXN#GQ58nIV!e>Xia4{QBErz)#`jdNxpwK z$;hCr>nY><-Na)7E0c+`ZsVI9w)2l{nfw}I%2cY1ykdIX`VU>sVc?6)@K(xhb;>y` z^&-Aok?E5$ro=iC>975mwIr;Cl#k_KX)G|9i~)U{I?J>kVJD6ZXOkY_M=a`34$>8^ zPPG&_)#Zmnx$@}dzX z^E&)HwZ2NouEjIYYe7Aed-4D6oPb`wXFfLshHuGIR6zP@JGalrrZGKl_GmlLkhg(R zI%S)p7ef&BHM{ygNbK9ujgh5q{FWkgIr!*Bof8^kpq zx`ojh>*ovg2P{-qe~cUK<;8D>o{|K8qoSFqJ9u%&*lwObDksU^H|OG~6;0^iUJf+G+fs{Cpk zsT1Q!-A&D0=g^bUObxm;P4q80f{V4qKXZk=h3ay3>dwqkSF-(@e4jvn86}ElynG$w zH>|y3&#*t5>8}r;$C4g_l-D87Yt)}*+5ccsP}E-(W;M<7THdR&>%+}FC2z~Ip;nji zP>f3fLa_|XmUzy|m2CcKfcZRowY*kbn(en9&Z1Nu`3+e;RDmV+n%`LPv9W+#KGu@= zfaEP+AN3Eh?17Sb#CcZOBYEq?BX~%SM)>bCsKrGEWKJ_`KGY$phR`+%MZ*#bM(-HH zFuzgrl8%!)dK~{XBFG4OJ?${EzL{# zy4=+kaJ>;|Usv^BXt`8ZG2?puQaaOvRdWH9Q@@~O)j5DzE1IpDikMg+UAHq+;UZY}a9YkERnvrYcMjiG4$y6oR&|W| zf-uC+%lI{4kcE6Z{k)3UHwt|6zmWgO`JcyswNap!NAr+V*Lhr`A0zZ*h<@bjha3(< z78#e}u^U0bqe(yXUbT259^-UTxOT=_zQTQlwbjcqBu5&T;V@^^>SO9omeZ+O=N%@K zr!#IWT(eWAkIC+|K{EdZD%Shmwr;71rKJ+)q}Fd-|5{h0j>>k)BzybXst+M?MJ2BF ztPHHV8=zaBJF>NH>2_GklCS%2!YCiK7I#zhfJ)@^Nv#l1mrgK@&23MSh{t(tQ zq|n)8)STl{q$EA0)=NTGBUlg1NW9+;`{h_htG;kw^RJaW3M(G6{ag(pdOJf?DVy@W z*pUx6QO3u{H^Wl>$Hvu6ySfl^;N3g`6xq!y`h=IZ`fRlC+0XU6((%352!-4%Iw zD;Z)3+?;ns?HdXB3P0TGWBgf~)LwoGh&Fp~18#e{K-7F5?>o;Vo&7N8zIvBY(}#c= z`qX2Do&_HVEF-ce5lA=etpt45N8V!=32S*HyR&mN>EAfjO(+t+P!abcsZQ3>Mi&V} z&AS=-}t9k~bi=>xZ3Y@MYEWPN3`Jzr=d96Lf zN>i6xyW2N9U{)16I0~OeA6A_H8zqm8nnRFYX!$*qlg7m{5a8~ee*gkLm;f-(yF@*# z9YM=z!NOf2L_1W-wIKxR!;({=1}@<^7*Dv^DWZAYPq~!_k%C00-Q

6b7`8(s7i z?-S>RmP?Uo(+3u=30k`+vL56-=CWCtzyW(!$y{NE_E@nknP%(=xZdHu0;p*i= zB?#!V)x5;=5mHHXkx)zX0lJ7qp0^85WQA}AXVygUrt%?_UhS`h(nWE+pZvMB$Rb_L z!+yyhT9FA+bI+@$xUUMy+p41GE2ts0A6mG3Ms-5-ccdgI- zI&_{u9aS2ud92R2n%4J6tE&M)R@t5swTF<&mBmM*QOT`zwROKA8;X!HNOOO_6;QaY zM%934R~)MxLbBA*+*&OlWX!oj8xS0cUR8=&GINz!7D>~6PT|)5VyRJ-0?)c%EG9lL zPx?Gljl8!kYyOcGZ4ZBLo;-&3p<$Pvq`0Yf+XHNPyj~~&k51kNm`hLA$v-8kd8AIh zPbY7boSQAgT~mFGD|>-3W_9sM&`iV@7DWAl$I6hrmp4!V=zZ)G;_{75Y+-`2eNdUn`@ zUfdE+osUem7w?hzzG%jyW0UR0&^?z>$MSpFQfh=ZQA}t?zRP%EwYl{dZOk{(7b7j`?=3 zh0+Pzn)l3=rVMXX`NH#fh$ynQp}y~qs!ro={tx4Cf0j3$J+wp`)ngj->!oWO8`WBe zdcQp`ExkTmNlEfoSR1f#JH;MTGM>ld$Tc4G^rKoo?$D13`f-VVC_!sy4Bz5PyQrdQ ziQm0wwZIu&zEHvWcHySyWVYLp*sNZ|qk4Rf%*3h&Oso%#K4eQ#%%=DB7H{_&W42o? zq?6T&`Bm6spSosvpvYd6YTF>cpPBnVjoJc#F}Hw^*>8+lZK+_Oy*^lci2G{f?w}QRne`ML);i<@o6M`z1;5{-pO2 z@prrTNQHUP(+=qb?PVE~Dr-iTD^bHuVbYA7*tgEwA?pCGb=_>Cpyc%_W;FZ$@S5qp zyv1)pJa3uSi({!!7_;7DZLX|a1Ad%kh<|I#F%I$XZ?#qqdsL`@I*z_0 zKVa&r+UC2dz*0%662M5I(|lI*DLO?An9mD^`3f;zKgB#x=nF?43;}xtLB4+E=tr7< z?A8*XNk2B~M=cLJ$Yu!z^5F4Qd9WmnF64?!wT$$+{&Xi!r}IUWwN{Q$2wJU$`#RA( z@PiUOo)Ij|?jaja)aIRn*u9>@HJlRADs;R=evmNSDcW8W7732w-$?66O!2-%+Pjp# z^17ZCQQuL^^K1l8YkmUBV}ZB$M-oLk@>+Xb|M7`wlZVD9!Q@$dS<&M{c}P4;e7f#L66n} zg#H2iD8a(D(X`T83(XF8ZcDA&;e2lU(Pb|PJx`q1ULR`jVc3re!RgAe9Eu>f9NF_` zKb*!xbDsV+#q(iR7CY}bc!59M1`ih-RlVx~S-jhLU?K6`-wqUlzy8o^MsIYEYA7Fb z_%q5YHjcLED+IV7ldI>rr(T6xj*Hu43U+nbZLPOBHvOAs^klDHbkhEmn@=~ES2UKo9(q*pDRs?xRM2Z* zE9TB_W3KEk<*GetdUd7uPZa!&^r&o369;WuKK5B{UUe8pjbNYVi+;@)e!Ft0*J@(G z$m?oqIAFS6qIk{dv9x}{3Rd*7Ws;=#y@l_a>~%F3tn#_ubv3d;OU7=cb3l-7kX3(X z98;CDyWxPVkwV(cP`k%?;7SCEmbjtiLe^>1CnnZYabG1d{^)~Z){U55G;2ilyT33N zPo0GzUbb8sfRj7S+NKP%x@m%$wVOjcW{sHr%yOX`Idp+xm)Z^v3KVGr!C0^sJMamI zBp^j&4hO>siRjwW_Kol|?!d|CX;CFdgB2fpwE`-yc(2@8@Q>%AC>c0tKL2VLJI)sz z3RG+e7Vj~_Ys7&SmwOT)Tbu1byJZWR$XMsxa^k#E#mzqZ+wErPV0xh9pfN{EGu7aO zH);#7vmHNBv6sFz_ir)nt6jm0m4S*)D!eIBv6eDK5curxwE65y>9L2UbCs~x>#pPU zMMg<6xl2r|se_W-mPZ#$%W~WN+;aPjo@KMo_>)=tVFm|cd>9D5;~v>w z^GEf8eMaBUNGt3vt!(zKb3g5>KuPd)l>ijQ-IX@RKI1E&k>=tYPN4rtpx+k=y(`c! z66np^UC_sSZr_l7q2&_cnc?f`I-*2s zGna~RH~%_=-1f{S0`B;+Ysr4}aaC>Dx ze?4RTII3l`uYd>cpezTJ`I!!XnEm(uiaI~DCRQEi)A$NEd9BOWd5hV{GJ3C7wS+6o zYZxv_i&o{x?d90GmJc;^`Nn9;gB(-vpeMlfAOY7w{|gWAY`EsfzkRYUU@SPOk0VU0 z#bEu)L1xs>2)I_LgN90GvY&5_)m(7B|6<_|0*BJG_89JQ#{ag->V2k~Srt8JP%ymytQF*}!*l>3ZW#C(OZ5g5S zp$T8{2D!{0t}`B5k+q_-H>uTRHbQx#^{gEZnzS5;v-)a-?s>B3t9^ZW#j)ODmoG8w zp5%*`uOl(vVra|v4X-7ab|4mjw7aujobdCL`#_@asU9OTE zf5zx^qQ5%R*F8b2e4*F!&9}<`z+OMAYK}GS@fWhdxcNc83s`k(TFYdxE$W+NEbu*U z`JM_*`$O7{p7lOO0xc)_?P;r{RexyCXUIbo*&s4oz8ZhUw5Ohj$J3h2zAYtTujYuR ztIC9+R+A8#_Eg#oMrAaoJN#bn`62C#Hzczv40%+27>t%LH0w>(DxqofPnuDpQ6Et+ z6FBXZ;;LL4EeE*r$NlYVSmWa97!T2TB#xx2JuMGLee>-R@5ByxQ1j*Ut+fpY_iw=* zvMzrl)Oz;R%q5X_Bdw)hsP#nS7qU**)|babeUHD=6q@#UnlblcARjKdo|7MA^lGd8 zAqr)}B2=42L#oCxqP|C1!LW0HE7s6zl|SON-Tp?)Hz(?Q%J#Qebe_mF}OHQ=>5gu8BMD{>0h58B(m@^Lu zr7w{myqH?-4X@P}z5H>%wb>gjf2jFUhE%=L??V5dV#184;Ci2o81q;nkMfFLBcq<* zkBkO??@`x{x?=t%aoNH2>1w?ZL1c&jE3yRV3^VHK6Nq9V=A@0ZJiqfMLTQoO1X>T0cj|5vQ_vvGo*8;AS;d*nAF8t5HNXYT}-xL0=3J z=A?%E?^OoHcpgiCCVgP{p2T}|(@o0Wn5mP0B+1it@?(-5)5$mJnF|^()(#^AD4Qq`skyQ!e-3> zMfrud&S2rlJSS^Qp5OMZCeQz4?rq?sDzC)+H!kz6iU(k-sE)t24rue7UcY84TAnE^@yS`06XC{@7M ziDMP8g#gO@zvsDkCKJTnZu{TQulam3_ul9Ib2h0<$PEukis(93 zr1rDePx%_N58A}SW@2m^Ut#l4Jug!k$k|yRIEn9=*u3CPZsyK#Gd4~|s0tcfRNtLh zk?+Wggy4ycg+gl!3w)n&;QLnIw*=w>CH6deT5vn&*&JDnx3EDQgvwF zKJDqaC`xT9LdxZ@dPF*^E&V(wp-N4M7JG@(qwCc0xp2MvQh~*6lL}`FqbuWfM7!|0 zBifBa$N#HL(u^*yxQ=Af)MU-(RDa%p*;;v5N^?>RAxsONA-9Q3wGV}}Rpj)GPTnt`0&ZZT884o>4!nkN;?ScN`<{H|-~xByP~@=62nDQ8)i&V2hui zfcX(5_q)Nmk2+&-?t^P6u&ww|Uq&^$6ZAqF*@iH-fOC?H{A~XbN{EP#$E~(9aN>WI^~mml0E4G77gnm>8D};$hpk; zR5_gH2H}8`ufeer9xqop$}yMagl|*fO4&mNh_2Nt2{T1;E?$|Jw}C8DOF1hp`BPzh zm2ij#N_&$7zaa$2A;4Y+KL_k{^#?QfxQn8gpP3ZpH)A0l2IQtWz1=)y#>DZg3HjNI z={QH5Mzo?7O)heP4wO8Y5)ktWMUxxs0Zyc~P7)@UN&<7!hP+GZ?>+yh*a3$(i0~0z z*p3!TY`)YP+eayF4TI&Xd!bBoac7{Nrseg-ktp{o^ea-R6>c-k7MCGt*acdU3Yn4F z+A60+d#H!Yyu}uDu+&2QD?Ri?L^oCWmYNGl zav@zKt=9cgx)p8@3E^wmGDFD+pd50?$b?}+l&FRv-uPupO&q*dD=Q$2j-36c)AQrG z|I&zFEBs7X!j#UA^8wkP7SjZFl1RBRdFA;bN?I?|JMvpt1vvRupc*Z zNw+`4V}D!vq$+UPp4jbDo;%WKBQ)W&kN>gd)9IC^fDt|@HkL43FEL}csh3_;Y3{kh zAgocWfrtzkP4z;(b6y}oCpR@w{vKfk+DQjs3(kzXc+!C$XE2c+kVdcQ^xL<3M2QTS zEbMCv9va7kc&^l$Boqj9Ks|u%R<^u!cd^!dQ2J_ zsCqM?O?fj=^|odUg%+^OuGEjg06Zq0RIyXv40t|NWVgTK0L(4YUsWr@n&npYV(a?F z5Tvg`aOcQs;J03MoGLr~)(O;+Mzb-t(YkX()*@Lx0kf>lZ&shn>7kzP6qtBS8W*q^ zTnR#0*xqv%+gncm=xvodu$yHmWSPwWP?+y@CKJ>ubEh~q%a%z7vIDU{>cW#|_)LF1 zP}LdGLLA2|Y_lTm*7R0q3>BOtEB?sjN8-^_aGavTX)WB$sSJR?fg}b&cbLa3c0`XC zHGMYPJFw|fi348v=n9U_;;i@cf6Q*Ts=6rMnfi2dcfo9hE_?WhDOu*NPyt&1&XNVh_20O z-6Dt?`bB}yn0QZAvIB1c+w1k)Mt<}}!Ga4#xN(P5zOE|JsR7g0*(xyVMjczJqZjd# zTgTQy*)QCRmTZyTM+l{$g4>Y-x18l(ykqY0Bic>e{2g8#W%O3~&Egib+ny#u)g_|z z>4>Qo43g&Gcctta>E9vvVo=N3sIv3g7&PiIp9xfr&4H>T#`^nR2_R6l$ADquPqA^B zR1&C)v{}{Xge)bb(aq{M(|b;4rBoYr0R*E+F-EqW##adscYezjwQbgIXC!^C+no;H z7!&lInw-r`ceW+oDUmeZJ@V?)R_#<{zen~~ZPkCeAB+zg-s)q!?5qq%dw3>wn23$VEUkk{2yB z8lGk7_Fces6~vOQI!64>4r>mg?onuXMC7fF9eQqWQjV1tN}-F)(gh-2~% z)Hiu%z2zQ%Ml*y=(!Q zlw9w;Xs^iiL~(Y4UHlaFaJm+0)pxz+Y;|{mERhFGS|tcX%noC#FrZT#H5KSEPH3e{ z<(VC?gvLl+Ip>w8!X$*t#B$z8Eyv(^)u#&*e)dH|)DAM{sK^1o30BQ+_|4Mo&cLJ2 zW2HP8kM>E{=+&%yP8)@VMZ&f+BVj{;D{?{AYY`2Cyrq#MWdk(*=36de4w%?5R(o>N zew%nJvNBNho)!}^nT$9WHLUQX6SjDJ^RZmp(3?NO4E1_5Yig`e?3ZMuQo3F2MP{TB z&d9|X?67*5$fP=4nbe^LFQG6YEvYzwiUne+Edb|z-=+D^@F1M}63Wo7aOxPgj}K({ zZP^ACGP}pR{vLOW{O^#NH5MCh=mR2>8oS8!o|TRx`d!t73@M8krUvUa3vR$VFZ=u! zXP;lKLaY~$E`j2~4WjV#UBPhd{ zC#iZ#C8L-fz|ZC+{#f1S*p`6ZP=#4wu1EJKAmmSU6CJx_RkF5NQ_vC@=CH$&?6={`y`9Dkamt+yxLmwn4nIKx2$!`EzBzwmxA@?J=}-7cx-o(?$aAoY?x<5a@cnS|W>`KB+762_;3o!&AjQ}0CJo_TQuebzz> zPCLBX_mayvTguq>?%y0py4A^u6Rl1N`nN)=`9jdDE=zt@j;B7cJ|+6RJqHAk^Q{*7 zUt~GUdxe}%1RhM@@}}B&f9*B_pj=_es_WXqD0k{CBva@1O4>sLz!Wtj#q4m(0wxJB z7o0DeL@3gc)3B#`#~f7&L`~I|-}$WxANs5EBLmZ0)GeKsQ%XL6IRY3pjj(B5`WA0I ze>Q^_&(HJ8!z+~ubscZnl6Oc*G0D`l3q<%SqfQo2mqM0;D_QVva&uv~b*Tt;80#(G zPLWl2N*5YB5%P1SJLag_>4=B6YKoL~+j0d2T(-T84w<**lX)Ah;nyi$u37YJ%pRvP zU`vKeP87_B1dU0!$*FIH4{<{B*{?FyFrR~@Sv_(|GKkKj9a+uIFeDY<4k3dz-%pkq zLU;`iG!xb3M19qb8stQ&{Y{eIK#3yplMN7(EYPgoyO;4|R8|MsdN@PX<-o@Za46z0 zE0%hbUmy=>c|*<&blQ^b6wn#y;Frgf^5}#2Qa@b z?!U^@<>cY$T6KH3>UMPDl02=|q$hfG0jp8FZ=t-~Q%ZDuZm;roRJnv3c~)_m-due= zKXOCBy8bu|zgzU4%#8r|9-I#76_AG`uhF9?i<&+y4AVId!{o2n%T|eX&yjhkj-}4_ zSG~HhSU9DD#Cy6@`}OF?`2iD^03+S0SJ8r|WzOQMLm1ItAHU_bJf_l>SjR4w4S_o& ztx#ujf2-EpSqq8I#MFwOqG&J(9o1Po3Mmnf(rWckh^Mo*T$WB}Eg&P05+`M~6IkN} z`klvU=K+vO%1S56Sm!bBHVK6DlBiuJ614Y79-g!Sjk5tCis4MO;Jc;x{ znkI=mYs;MKOTWNZ>T7+$P<_Of%K1a8nqbz6q(*Wj!H7TdQePyPr+mvJb$0)6y2h@M zH>*byjlsIp5=QVB{IB7E2mc58&&co8XhNTethW{;F>?E@OI!3SLbQtuU*&qQw&+1V zqD{U$t?i$AQ;J#_*N)T{wW{!<0rMKI+LClvw6|bhL$qnsZS($#I}x|dyFJ=eHgMiI zqD|$Vc{8I;qdoJ!Zq-&xx6Hwzo)EI=aD%!xOZp#~K0GDlq;asw_`lt@iY&#r#~qI6sK?9ArhQs7hi#Pt_tls z_7V!qM8{Xls^Dd%Iej;;#3ao_=a);T9! zmkwy_s|QZ7XI@r-W3K3?IY!++G86=G$)u{O+ZR|oYRIIvQN#3>jS>>5IDy7(VDZSo zliEgVs1gUUaIMA0%PbV&`Xn7*sl|r!l{3Q5`D)*JNrrI2p$S7)Gf@p$6(g73&jmyU zGBGmA7{zsU%OyuX7gk98`hi}?1czAt2JO%l?w}FZFtCu{1q1W@4cm5xH9KroyPCe! zZ`3*%)c>DGji#Mp*l4!yIi#ndXGHKxKfA?u7?^-(x>$>y0$g*3kM-XVf5f(G_u&^C zjwP_x0nNBQw#I)){3C>H=%(xp$-%}}d@e#uqr!n{@aZefjmKVgLb{DQOoUHgfeI|T zue^2H-WW5RmjQ0DOyR#@E|YTh!xO|rYYhua@P~riE(R39wc8am$X5G7xNaZNHvh`} zJTSnhPaD>(Zl0g@+rO1Gh!L)VkqT6Nh}BRMlzH*7Rp%c+Ypu5Q1dBFg&00yBqdp5k zzMPjb7l#BYUcqlnxDKH)c>-0>YfGOax!$tLfx}HyEA}%S_epYv`00b)b2kWqU zJNBHKwkvy<(2jt3XxdwA&#a-8lhm*YG$7OW%r&YNqdr}0`)jhbv(RXo7wT(Ey?2Ky<+oqy&zq{f43Qie3X;cpoyiHzVitv*xe$~f$&D4 zvxd3JQz(Sqb4c2qd=zRCzQ_*Fm2;~+Lx26|a{+S;N;GIl$%bx@DntCE^cg~R z$&jb7TSYXCZb>D35YLj3PBXII*^cL=c#;&SRer|)BDw3UAG5oZDkv)3vz#LT(Wx|O zFFa%P1gFNLej}{#8O+cCgw+G#pLqHv74cEa&v1G3P4dYnKf~qCH>pHE`57*6zDcF> z$_Zglt2VSX(Lw>;9_1Zf)r?hCF0VFV#)lm_7ay>nBtf*&X(L5cKSlvzk3d z-OC}*2ZraQQHL3o?XdtIsg-lPQn-|)%%h4S;=A}g{xWbO}| zuL}NEI83sk4X5U zd|p>dinOGVye~-57v^o-M6@Wj~IMu!Z~bD}ZVrQKJ1+OD3n-ekSdOXkuywFpg? z9h^q&UoRm~dsic}I_H^HmAMtCqY~p7I z@`!SRZ`?*n<%<)E~R7)20B>8?T^@7imUUJ?~zUbOtSfIDB?#fd6vIU z$Qx9!nSgIeFEHU$E-jO8G9oh$5OEhxxUq+S)U;+wzm4y>8{XwUyVcXt;@%*LTwg1{sUbP-&B*JKgG~vR>okqMKCUj5lRv9bgH()o*2qE?c0B3NtI~_ouC_&8Z@a zE*wQEz|V{`!H*H$fOrV@tQFLlx45w6%Z{sS5ykbn?E5^S&`6)YNC?p^KjpWZh416q zonJE&;$d3vPV%Tkv0YT+)07c;8F8vT^x(z$qW{?L1x8vK@wA)}lIRIsWakv3+zsy9QdoQ;?glwK%I+7~Uy!jf zI=u;1oVt8n6G>*ym$LD#2~nWTP4fn6;Q!tH#0w?EpY&IJ4SXzKVd~7U2QVl!mU-|`qDX`6coA2OZ9C*OwR=El*cuR*IW-N#0NOB8}Una6p?_d+fLC(RMF8B*F^T49X_Tmw7RSoXx_|t&-Ls%mNJhf)=ptf!CcM3W8H=?hh1v!1CQNL3zbXiaO zdTFm2Sz)#MWaPLPVSBGYx~2VG_~oA~7!ki4qegp(~F}K-=I8kWa{--<9@P;mRg-!fD%_(vWp) zIUXR^G*fEw+^@)?n&?=r<`YV3N>YzD`aF@#b5F>nmQ2mP{p<0YJpoKs zoxNuSI1Ei)xaigDa=za@t~T7m>9aQym(!9=7VE#r@_>qyA?%O|4;4gKhUyk}ADPG` zo{~uf6x0NkC$C4dK_*ZlhkH*I%u+MsFNkodB(m8*KC(i)PmD-_qm3LKouxOvX4DNZ z>bnGJje;qqM%|0X9Xm%Go^93?FJg!`fwQWFw&Vou;BYb0jtQmJ6G$DhhZZ5;%)q-f znA`s8Q|Y;b)A)pLIhbxrH?<@@46ZqtbDWU%^&(x{P(0ahUFQwiH+k{lF3GhAHc?A# z1f`2_+C$m(BjU!PNbvO?@8~VBNomMg+7YHtn0s$ zQ|LtM`X1V4=`FFXQ|y^v@izQN$a5l7>7pmdIoo`$XAMtX-4&i4+b2%sxmY|=w8N9kbw5|NRuW6@Lw>UkC|q^D=!t{XTz1x3b5>YU1vq!zsYYkEG|ZCLiKCazPU7i zi@xJMz2z;{eEUJ<>I}!s#l_$dB&8G@S#8uINg4SS*1wtpiz%?LA3md}g@RGCb4F=i zA&pJp0sXntM??mg5%Jq!^~jxQo$>Tr-z{=mfjr{$X4JaP@S8UkNe*q%hXNgEY{lrR zNnXwVJn_+9t?4`~|0*@ZgVOOG$uCNuP}ihG`D$@+`%b@Q)}~KPg!P#}}|iAGFu1WgfJjqQSs%;X`DT3|&S6GIY~YDJ`o;We9W7_qNf}DOiGn zjg~DAEm`<2H&><_mAoZ7ja*W$esn;AqwVI2E+I@`JU|e1CaB#BiYL8g9<=T}(PdJb zl7rUFSBH4JDaX3Dk|VCEUcEqb^hvs{>*l1lMNbUS7Inxl*q5)BN8QMO!T(?SHGT0p z&94rd0>0Q-+yIgJIRS8&N9102xc;bYGZPjsyG-^Oa;55=0-8^F8U{X*mXNQ8 zt$EW3mG^+kpYIfyx-x7%T|-BM)&mBQu-$OZz+mD%M4+c!TIV^xBDGRO^~GQJNCDn0 z-Xb9obEP3+w#$Fu|J(fE$N!`J%lXh7{Ach7p5y|?jB zTJ_#M2K|r@Rjh28cC%Wcjy_Y5=p5zJ8%Vsm!gkH*5C;Wf;=-;SLbWS;4%2Q&z8dJ_ zMq#rqK9GBSc+Tz);F4$2>y!fwK;^C)1#J*my?E3(-ZAdKigT2mk%8(ic^xO=91I<-|BsjX}hAqSnapK!%X zq!~TMxLlG`#3YK?==UUbyVWZ?h^WJawJFb$sCbI**~(|*C;`;Ak>mWRVcx$NLpkI+^XyyqAij8!3^h0hw@ptf)f!r@9#iLg9TW@I^4ZilO~iA z(;x?Bs21{sNLkp-vzv2j$@3s5yxM(Y0Es-Jee0CDP84CCZ0lw?ujEuZ`zo^o7jZ{} z8X~Ic`cBG|gwBMPDj-nWvymIrcqAMOn$7ulT<2jXR6aD zbQ)VW3%us+w``p!CIYSY<=0<^>Wmz5!nqtJD49P7xlwjM&iHF$Q=3#`4YR)P4b>&W zcXWL&$PLuGbm)#3ht%S-5cHyVJwLSk=mSlY#c>=rQ*C}9bc@S$@ z_31Wh!}q2fvna_ovfwb8dN8b$-M<~OQQWoTtzFEEOyukcn@0NjiKGf^Q{Ms_#(s!420WW}&xZlepA=PwU0C9eqhb}V@011v>pzl~;ggM~ zgzrcX3E%NMIu)lk1JgJJKM<-rKGiP!0n9x$b2K)%P3-a>OI13%hHBZWOSIT^40O2u zk5X9B^JhT&%7Et(r&K^*baOtU(W-3${MeT@JwX`;;#nqm+3jIdyYqs4{NGI zxdwGV`|`R)4F9U)F~%KRKZjGu=m`&9rwG1>Xsi65A+V<6aMh_MgtZiGy8!A@}YI-%wJh*Q} ze3}|IJ6b&{FY+g}bYt=F<7PIp7X_H^#Ek zpfH@%d>;odb8+D0D;&U^Xb69*MKGwcVtl}wh?T*KVw|vsTPTo6=#49?!qBFo#AJ1_ zQ)Vk{rj>b%hxaj1Y5)BPGB-iqR`f%k?aeAHe84nj=7d_|H%#N!egR3-xUFBnyQXn_ z^zKr0%11F7Ryb)z-nF^VZ3PZ+y6{G=Jrcg-B=*)Lh5B#PsZaaOmlN+`%I9Uyza2#F z5p|W5dfO&{+fSQeg$0)v>QAV&J5}19l2#e-P-#!-Z5#bC{N`1PMJS zcARibdXVf`x-EJSDOmcuYT91(m%dn2+F8?##UAbc&Khl1+Pu3AXu7LjOzS*7>IPtW zr>xr>IK=_~AJUaEu5d*+f!^AHXD@*XmQO|}KsJ<-Qz1?=0kW|aPt`p;5QA@L0Z2Aa zH<4LQ`>_ zib``|g`jd@6;Z`I(8dkDn{xoJSyJ?;52EkRHvDTjl+iY+Ng_8&ZC)U3>{D(G;CtBdZqG1-QB9%sXL~b0ZOvi~i2%7n8#3M3Q%EB|Vyi~uwf{BmTzcvB z`J2&y{;nFM=8wfE^S4B)d#L%_e3qJ*E}6>F>NPWe?r*e{WQ`HnF6yffL% zIrDvuGvCvh?~xZ?YkMztJNQiBe1~)A`ztcvTxi{Rs%pE;H@D2CJHOyUX3k`5r%iUt zN6j=*=DU;mjxgWvHPasE+c89-=3C8Vu88*x^a}1o;ozK`@C}zo@2<{kyd-4T&7m_w z|H4rvOGdKAqV!kJbxD*B;`-;d0Cbh=IO2}#ravgn=^xP?g^OMOPaKYO-WRl%3_KuF z(FE40dkV}Y6K8@fB)GSK@U3pJkD19yeVZFx-aq(uf>|RtlI|^u{6ucD9C=4HDP6x2 zSud)xVN<99!7146`_D0Bx$GwZ$bjSYq*xl7gUJUym<^(F! z80O$F^+gUU+*bLkzE$0L0cDY*QXD`3rdY10=-RSQF*4uqpKiM3)`wU~Vs<`OBZFZ* zB!fY|ko}YxB$ceQ$H{UymVA}#79iO}G8blSFX^n9jE@<6kYB|wVWM2feH6gQT!|>e zmWc0z|JF$lldl|>ZaVKRd;4cMvRMt=7F+fBqQrEZWP59=G|Zl_N_HG(WD_U13O=!7 z%|tHFQ;d7;1sZ5QRKkc9JoG2R!3%^)DrLaiZgVgbw*~Ds2Qwi}u$#|}nbg9iai2NK z0Dl@gL#fa9$^R9;PARKBr(#>bf9M&R1`_9ySk|(0X<^JxbH9?qV+c5e6;0{W2$%_c zUXa|3NgHLNL+Zvtr zz}$BD&G(gvG*kVLRx<16Koh$5{Y=F_Ptj`(rNdzAv}X3}{c zzC^mU-?1Kg+ZB#=P?2NyJj@SMsA%Tw6gs4{8W4wcRs$lWGun>~J!%$_mHOI?W!~+F zO4WQkB=+_By4v{?d+%BD)Y)&I{UYhv9VH=sk`xZ&aMMk)9(_bQ;4gSob)+A1pT06= z_OhQd7o+;`=VI0ARL*=vI*>Rs@;FY&Oh`UL?g?hAD&1^Vh38C-7wpF1GA;OKO>aV5 zr9z9{C9oEKOxh|FA&qUuBt|g$;iX#aQX*YaijK%+u@?$O0j!SNJq!JtAp|DWX21d;tD87@#S3S!u|8q=QI~y&1y{ef5y! zootW#f?+z-VLc>eyCKpCnLq0x$vL|{U|r%b_%h2tItc|;2^x?z=xB~PZR~rBg~_p= zx|P}mwSt0v21tQ~W3y$xG0;lJ9DC<>yXyuhIp9@E*Kkb+HC-W~=^%H*o;L@Z3$py4 zad5~wwR}JLMHaAGvX6kSQv;BdzKaa0WwY!m{iO)+B0hjo9QFkm#RmXn7{wlfl50yP z{HotO(eHnr=;coIeu;j_iT)2Kx?7@u>_qR7=td`csT2JhiT;Tbyp|x{vzU8JvKj)u zep9oodeO&?HItGdF=H~FJOo&B>B$^?;DL5j+g0p@)W zKAhb^xi88#pfmaGmsDgkK#pbuEi*e?}US8M}VT~U%+>>CbNmvxp!Cai8*tzdt!y8HSeSbcz`?c0HC zoiUfWH45C>Q!`D!)VvqO4oRE?1<`c^U3m@X_myBhB|*u%D%EmreMErNUC4d4?D(=1 z%Yk5?b-#dQdYh@9$cUEymc`%G>&!ISbB6SjHwpyP>=S6|pT14V3h&z{WJogeo!K8G z1!z^G`t1)BthEY*7p(pG_7GruIFUNf-KsP21O5L;m;Uc+JOm97{qN8LJ_PHh?FgrB z0oePDJ|<0(8I!j3p?~4`vgrR2fv&LqXqkim?}ROSw9MH6?u0Me>}&wv%&=sz$1?2# znIZcTv8~GNOYwX;8-OZM@duXL|A}z$e;JPDT>L+}JY*^&0ahXx|4UoI_Fo47t8uo} zHXtEfA!h516Q515b2m>fxEer`v}^$5Cfmj1UCf_hp?mTb=3lp*Bw2qMk&-QoqG0WG z=ORU((-~!lJ$0uXA6Y7~QTMb$CW!V>_;sW@I14&KNk15DV)h#;z z&Y>V8{BVc1!E0c@1)UE3*y$~A~Hhw3;+#>M)l$~W1` zH(sLT@@c+PtrU5QTjK+6&O((_czl)9M|98KZrlLk2KSZvr;pSC{2wWGAW;MQqF!>M zMyb$DVQYR4FeKL#)l(rQM$<*v9BUqtxPK!~kG}0e*WQ`%H9wSKOR^m0jVvRY#!7uf zv>n$k-;oS_VvRyRzoGJX{+T0))LjTH*0GxMdgLA&IX~~_6wY9O^2(f?iY-fi(aHQr zGJi&8E+Sv*8=2aiM0qMvdV+)wZaUv7EA^pN(D@2E=c$|sOY>5Ixx?@!pL62Z5kFJK z%PQ~V9|N)XvtXbg>!+kg{XyUH5oT&42Lu2^77L^QY)ewq$dfj@&w#7O@d_wVF}Xdj zqEDB_pZ(V#_79;Pt2E44lhbIr5-@Dhk8bfa?9Ncrx7!R6AqXLrDwxV{-NMnq zEs*n?-}+8*iS@KgqMK@4u$~sjK8C%)@mHkSv*@XU8e|%BT7+HX zB3#4!bT3FsaSW`$hKms4SCA?)+}yjPx8-<)yS-vFQfLK{I@?j0-%>D0a00?>dy;y z_WXj6e)Pg=xfP(9FB^9FVJYKgw~YJA=B8x8q=zFpo0-E2*W5weSbkW0Af6gfrTf&9 zipSzu(z`H_*D#Efw(Q#lER%p)>jPr&vRElZt``lS=SigQlL^{@V7&lZCQ#M^%t)#?7x6v^}&`UQT+*QB2Bq zzO>i}AgMl{VKrfYCC_jUtY_+M;Tc8>y`=bs!~OV$UMZYC5C?b+eZf=jN>?4y(omG( z#^fs4OEV_XW=x{{*ao*{{~g=#Rk|Z=gHOqa{_LJFyy%`U^sg*PWoKj?4zSm`rwx5< z!%tPQ5UqZfY3(qL~w{^e3 zu2J{hB14e|*D*cHI1E;TCgc4q*_t^L>zxH|ImLvzkk$WBcxaaOY%6KjW9FPqs&ZZrAQ%0 z2`*43B3$?FvZ8Rox64YP>t*u7b+?saCsCc&;i*?fENI924((!nhjzbnIE*_p9EJ-T z3KDXqO^=i~%!Z5_Jcam~bQw>Vj-wudC*tIeKZ*y!Z~TESO|ccf(Lv;C{D!p4$c^(H_3Ar$mbjfd%+Qb!31D7?Qnjtw{5ZyIOaH1Cbcba9s znhCuKCPEoz#>Q-anUiZ0A-n%y|FvjSQC{PP&Uqc27Mq+ppSdFBc}tr01beeg3p;$E zs$-{IyTbz~#Bljk_v3DyO~d`H98 zXgHx~d6h7kO~WACKR~C34GP<_L(Il=q|8MC;X;@BH<*DZcAvQoI!Kr1c89 z%%w7Hbl9m|5-Bl|ARJ4s=13p?pyuc6UsH$RNYbF9e!`@uxyIoedMmYzVPJh{-|W`s zKELQbFLIxkyU(lSnF=@v#raKdjUM-kO}_;tkU{kR#%;9hxs+Uq;uhA7-=~HV&NaUq zx2H&Vque!{!L5Kee(uW?O6HXMY!3dyUi!TTwP$Nx3ItEVvmkT)jItFh)kWC^u7ik>Zko3>$Fd6w6Hl<&b6WAh|x!^RF~W zPCNZjde)MAZ>6UNOQQ0~?MEJ|BKujn;_YRVHu_8b$rehsBWcdHgr! z|LiX-{~(JnxBVqf`8;yUkM@>F4rW?kF1V_O(ldkY%;xO&zVW4#nemm#%=pT?Grnaq zzB821$K3Ii1ljQw+JTrb#A9OF{2TaZow`QDkkBo5t%QyWHA=8ucb3lH$hB*V=ID9%f z`0sN;>J#8SI)}&W&c<_pxV>$_11XgPHU1kkt|8KE)sxizM8Yz zSIDJ8u~r(F2pXp%Haij8s?BNdA{8Q+E0mtu7bbZnCC%hsz$CBZc_b>)g@Sq!vXO;W zJUuBN<=pRSxES?1a#h;frRMY5OWtf zWL)lkZ&;UwJRH#-Q}*4V^P%VPkx=&+({pBIw^6s>s6SZ(%wbx<=g7YNJy3_rnG&Yf z<2?yRB4|(Y1;>nfcfBv3!gjrb62F*njV6jrWkWjJ`zi6~A=e#L#$mScCQ3c&1l}15Lx)MC=kThG zbrsv*X4H^e%dO`2pjklI0C!RLnOQ~_aXw_(fMMc z4G-Ed+!9g)f(oqWWPJ>3`CTHIHaCkr0xB0B^bW_FnuX^hs~RR8 z8M%etA}&3WOWCF-;)mn%e5}uwR=u>aP&c1XovV8`_wi2^e~@e5RexCcXHhOhUtjJ4 zaNaV#yJ|vFleDef%Hy)dhEfD>$v+~$MCPLI10dVSCwphIlQ2{?QKU?+<<;EVa~`Y- zwrI%f8(*R=9ml8m-fH~nn0-jY+jHSxpebZk?-h-(Qp5^Sqr(@;d z8f8)NE@?x0lV0_irUcF}nFQ_eSu1fT%o|Leb5|jO^(sltp~4F5A(^RToQvPibId;T zp#?n6hvxIk8tD;h#2I?U?>UL3FUJZw_wlAAn8o{2P_$;3nK-t?x?hT@+M!L^c5H_k zZWg=ofhBBpLKp`+Is0xQTOEjy@N z%gSVliW<}Cgl@&;16NkCXV}J2t4v;&l*y3Oh45+@7iR85>sBa++GcSp`i%Dq9paGp z&@;a9YN!w)vDHhsL*C-Lb)Qu6Np!y;x@YihD8zxJ@6I8Bni;Y@MNe@}X34!SK_vwL zbOv4)x@^~2rJq2ai;h^qoQ^l?n^kzTN*RXt6I-d9~w6zD5i zOi!-lC>keylNwduGG(HGL7DJ7OJcIqs`BJ1yn|%884S$RO3a>LHYV4B5>+*{;1t^$b`X1<@ra-rL z@7F{+WPNjm=;2B@k*pbO`lIIbHf#EW=JZxj5zgG2wb*|`c8d}8?-#OQQvZZin6?Ze zm~2%a;{NXn2N}pI68^Bp2bLhqiOISaC?XRc@KTrYBPy55j`CNFCR<~V;3TlsFvoHO zI#@Kh(<|4;kpAT41J&V3R|2Flrh4;_U-xYS7M7-!vN`dBItUe%vv9C@1k{#p1lhVs z5C4pox-*shcaB&T3N4ZCR;U?JdM^HxNI`E-uV#VjCW7`V8J@x*){K+iW_-hTqbEAv zajrfMkg|r@&@ubeehdDl_$9RFrTDV+vc5&#;#xrU?*XQtJqy!c3iPWo)KDQoR zBg@V6pjvg3E}AZn^cbDW;{5D(iKkZ*&qKcGl6>*_SYGT?(Y&g`+I`nBoITU{QHSC4 za}L8Hc$32vJ^X7PYp!Q*p=f(}Pfj}_?^m@r(UwGi--(v@o34m3Lie1y<{u$;ps2!%PMI~2nl7q0$=w5*a{@|*{3EVrcm3^4j*ugSjG1MX{QlnqDy^^=!jZeoUIdZ^k008zITEV+b?{sXm2M>tlt`%bDRHnsLZw5A0|O;Au0n@Ms5CxtV7P>;wjMlt5VUaZ z472Ft_NZ#&Z{_2q9m~+QHH(Xy4}MTnbhwRlLSIXNi1!i?Ksxd7e>}dB_**maKR+#= z@Nu1s+G&ye8TQog80OM8UY{8*-{uK)RBz4Vuhp^`Y8EfhPSvzsE#_Tt9?+9Di(*}x zc+2bAj=ev_S}ltb6NFddH-7MU1hZi=H1diy*qT$B-d=Th!KW7A(@YI*_q3?rd(>}~ z-_$=CR)^$H9Q4}X=RSU#Vy>=fdqNW0-@zSR|KgvJtoCXa$9zJd!sKhH`cjL4uVLy-EdstY^|iuHIYND@ML^tH>Px^x zN;yY;sYSrox#~*+i?ays5opOSf_wTcf_wTcf_vg_O0@{?+3bF)MR1S6k(8nq!9D#J z!95DFoJFvBH|etWeCpI>gSKzx+}5b`wk!@+RvOj=GUsiRKjdpn+vJaUT-rAI6pzc= zCa0~X0wCNCjUF#(IETP5v<>F>thULX#s12Iwh8&Ea~DtWw&gFLP}nxXvv|S)f)-C0 z*fycSQq{qysb{p;*YG($MdGw=<3P8+k;+4ZcE z!vx>nFwUsEZk*x490Z=e1gzc?=x#3kFtdDIcs-rp2G@(NoucUXYtVn2LuHnR!lZSB z*POl@XmdH)4r>nXL28OCu$b*r#=5krht0^tiPyY(1t&edJ`4(Wnc=lD^fPWLH7uhP z&aK-rMx*VCg`1MbZxF_@Pp{99ZSoC1Iu#N_Hgz@SFv?vxFI!y@c$D2LRCgfgdET|= z8Z=*V+nwR>(0>tA6Y%883qGKX0`8ebf9FH;5qSf}F-&gsq8KJjpFp7%SScmLad{G; zAJM4aBV{yDM%eQq*8rHPO%$^|@+vaMaXIwFY5kS? zlKFndOLyQGYP3~*bhBGe94OK~T)Ehoc+KbcZ0rXEAfUZ6`+^%kY~Jc|aAPY4IQoHx z+(D}yr?q}YO*eDR)N;M7OBdsY&yp%+PeLhYEA<5y`$E=oL26tr_svNapcXA zeXm9V8OzNMJO&m|>m`E_0+PYWF2q3p>_w41Axj~kkkuxoi**@*DPZ5EVMVfbv9|6DcENFYsX8Q`vhM5U zAwXS+8_v*RbgaFDN#m4quK>Sct(q?nv%!sx)^a~AT02dCW_T?P5t26EsMKPD$Q%pv z)>IKJP4!ySs?*y(w@qvd+as^TJDV31H9qLG8{`f;j?2VDJdp+Mt7#O$(+sQGq2y|3 z#I|P0uc@bzUm>eS`lq+m{5AB~qP?_J{;Wkp8K%2T^<;r4cjZ|+AOr6o!w*Ux7siGx z)*H-SjSIMzU!k0>$*QS4>^I{&ZYk=vi}okp3B)20udBt;p3t5E4C@Q82p_7oEV4$m zo{l7Me;);<@sZsNORlvS;J+4|9w_=X6!JE`EBSR|S={l=;_fsGX2ICekgD*L3%`Qh z()5=DPX;@;z#OH66UJx6#31g6#*U(T2p+e*uZXw{9OL!vGxr^rupax|K>p*fLf=7|(?NAmF zcYIhdYj@&x@Ro?@KsNhn&FG+gzu+n-hyF|vlbZ~Pz)}p@i+QhiFliuIND}9!qU$;4 zWqO8_NAVwq*(lpUkyTS}P7au7E$Vh&!R?FoI^dN%wjyFa?>7fyfZ0cMdpq+F%!$xhov z9s~9iNud1kn&-Yo@;P;>t)#B8wztMW+|bh5P3l=ahju#nk}WiAf6&3l8zl3r9{b%a zAD_E^l>hAL2B|Wyp$yiJQzlKnmm-CURF!e(@mrZ@rywbVeRp^`A2t6HH;N(UR#a< zZ1dXDR`_}I+HswIWt$UyQ|xN)@ZMb#_Ppo5mg2fdYmKsI2n%5^#++E$)4*qR;ci4M zD|r(Y^ZS0zOJ-E=e1{geqw-o7-GjPxU6};p4>9f&m@)|&)8`Q8nCyN{gMmHRgK~KFW{ynnvsk1K{czTgYo@$~c zf#S~ugaN`?nxyXCmpXk(R3ta z#?#wzWVBiQ;dqNuDGD4&Y$E-jk1#qSr!%b+QydUrRXBHKnx|XvoKJU2dT8%9kF8y{L zLyC__0fcq$$2$WLBM0R;L5Kx(9aqXDOW-xj7Zj>(oDwrG@}+2K4hSB$0xLMZn3`ZO zLfstr;xsbPJOsdEQ-lqKsq(0*cIPCPsyDBe8X{RWye{c#@JNh$HIwbmWe^oqS zCj8j!!?-sGmD9Ty3`NX1^xjg202Q_oii#R?1=5 z%BsL}E%sa5Bd$IBk*3+wKimJr-ZZJGsjjDv9O~9bm@w`$ddaeA1w2225HiZ93{%ITC zb5>bu5+1yQV)+W)`yoN=3TU$A%WsNc@ap6mo?-LiusIu-aOno_J-kYAu%HoQ`9$(b ziS;xVW%i$bI(8plFKD4H2X1p6!K0XH*z0a*vc?=m{jhN6)ksA>vN=9+zoWl@GdW1I zmn7>|M8&@;P0ZE+5ooK!{&mKr06r1@OFDV;n~xme6^XyxhBoZNC*)x&ud;?6Q#R2| z`zub-vGwT)x0=jat%FQN&7dtLV*C(HT3`_nOSUX8j$tNrujt*Uj1)6ZKms%$Ip{ z4CC|}7LS!?Vq)d)8|N6(*M`#M!Plj`&>C`VC5G4NT+UiC%<-JP%3!2k%U!>M{}u14 zt2x)7k+GiD6SzPSnctz0viR{YnD1{_XXbn3k3M0(t5*C~^R0A*|2O7)kZMmu|M~vs z*WCFwdHH*s@52ZGw)qZ-vms})XM9m6yOoLmpU?M#uVm(X=MO(&zJovetLA$rirN1w z>-#*_p3~<0-wwF*{bOGK9_QO54g4$Dw_pWleIv}7)pPq7{`&b|GA=XUuPyzA`Mwd^ zv5@8eLwx=k+9m%h^If6ZbJ~1A@v1xDzvAWZalVI31OJBkW__#4zWZ}7CU>xYe}417 z-oKrF`-J@o^ZcEkoOzxBHh15aw~y`HC%8WIx6QM`8S@$TZC$nJw0Yk42X~$my!<`R zbA>eUFPrBK|Mi#d$IkqHWyvSZ-*1-xRrB|iKmV=sH~-A@*P_~U+WZaP=gyypm%qpP ztAF`_dH#N|_!H*uFov$rglGSo_4fn0Fz`3gQ7g|pe+ku|)8=pTOYZ#Xy!<`R->>%m zFVEi^R1RgDKF0Tqfm{76=5Gx;W`EoK?LG7Sc~pB&o4>^`y7Sk<%irVt_3ZhZ=Fflx zHcVR>KlA?G{JQoxkzp4a_-_^E>^lqTIyzNmOssW}pI8)mhtFa&)}=m+Bm06@qYnW@ z!%oBc8ZSE=wmK&OvDH!{d(|`Ojd2nX>u|q+<(w46R=VFmCcc#T74Elb;CQB0w+0|N z(pp8EZG3^I6q>1-I|=!s^%2`lYU^5Wq9-5459CR)sU)PfbAr*vN{)ML_%xz-%j@O5 zipWZ<2*`g2|10=!=f7F2P$lya-CQ1`2*pFP^Qd$l!hG^2+$oPd=OIikU&5Jl!;@c( zhHyd~>sA3WTm)dvkQa`TIQEFHlR?gxQy1&na&5^PL<4?H4XhtaWW*)w-<1pY!((wi zIE@+Yx9%7XpDRO&F#v8c%OLtqJdWVv(3YB#SGZZ!aAP?yn^eZLf6^f&jjofC6X(@x zLL!cN=Fc;Wl{AdAlCM>wC3RY}c4Ev=a!C7~zG{!Fc7LE<7#C9j(%uiWn=u7&6RvUI z=K%lW#Js^G1o?-HxJGy$e$NWe$Lepgdbj8W-dI>ku!yv{@+$C0;U3Hjuah2$!GTVx zO@>ekm!6%u@KY4&6dwOFh40_x6uyh#{)LMb2cPON1-S*^6z|{C-((B>o)q@aZejO+ zyf6;R8jCTT+*stc)o07doVkrRWs4mp#g2E2z2xJ?7NfkWpe6eDDU8%nBByMf*}D85 z7r3M=&VbKQiwuhlZr5&#yVKinuHWMfCgbO{?IyHu<#N`A3T(s?UH|SsLF=5cY`Bni z{)hu2nW#kspEj1hp6kFIT$?^X6GLWM*=f)+7H$}LDv>if;HkvARxVb{;t{X(3UnWn z-UZB_WRa7$)J*B4rNnf`qJk&)-28@k;J$Lo)G>YSoId1YR+FE4S*XGYf6$IEDc{m#6No;>lm zlb>I)vHqp9+mS}@N}L>lEO0O92y!ch^MRI=BDjr886j`pRWvZvqfdy zRv+%}p6|)4*ygW~#HCE#vqw*y8sWMOnX8T2DhB%3OF4LYJ1pfNt@V1f)^E~mPE#vI z--ca5YrUQTe6e$AFj;yOevp{75b&Hc51f#OFxjfagS@erI3gIb3xMOEU9$e{Z_!fS> z(2l}&fXCpb3=@Qgl+V-Ui9aLNR^VP>k5Mq4PDNJY7W^FT@m}5Rq8*!bPp@9zD^(@l zA5qg*eGZsnJIOlSWS$r5epQ~8cJC3Uc%^R&fewfycpIYqbWiU2VAuhrzc|t^lJ0cia$5xjn$>qci(`NYh z>5eXZFi%_hGRJ>oj`oOuCI%ZlBT41J(+PmDg>#a0UP0t}&ldBD0DfNDoR0p}R6|aj z@|?tS7itwzqUpWGs{W0RuVs{74SSLYeG;v85pjA;uK=^w+AJT+o?D;-2N&Du^YrI| zm;J!YUIDxMT@JjQz@6)J#LkMFCle_ySngv+_xe5i{Pp`(ik8=fcDSt7?n1r6I;K4VcNm)N(Lb+){Nz zv9|P!f;OX@rwPhYHX1&LZ`A!Y4uD%<2U66TCdYJ;c3SIB0)QJ%B*n4BXA|$7@8MZs zPLHF#<$Uwxdvo+S-dlb_@@Q|7w&W+gAf*|z)$9@vfX;fv1qH#l_;K-di0KQM8yTt{ zI&hMBtw7wK7fk1P@0QUrfV$^7J@Gn_nh@Fcr{Zw0Wlb^fhuK?DQmyUk-&i(n`EtgcB34E(8;A`NE!4 zPFSf5s|tEJ9^4k$6|Q@Z8aR~S7OJ~t^s``baN(+>;**8^0nagPUeGmPz;h~KUK;ki zY^0xyyh6pLp}HGJ>ncO`_|@4jv{f&Q35~>CsMEdbH$O1aWItzT&t;eei(%%}SlnmhvP+jE@K5Ph ztrr_f(DL(!nLDBfOs+OM@PW^C5T0hUsRI+Z-JmDm4g$D4lhd#I0!C-RBK(q%37 zBicu|%UPeBLGQu3-(wdsSOBs_`-1zCJ9>5N1`t^{m=)V>!MZ==#Vc5F19#lOYc}F=r8Kp?QCRiZbb*;%2bbBm*O6%se4`HH~|If zsZUAMIvIB%3c8|Oy{6%HZ#q(sFZsiL!W_Ex9%tmhcXVMp_&iEJygl;vectf=c~s<$ zW_Lyt*=Z%S!s4$UP@fhmiq+{Y2-L@gkdp0~n1S^m6D)7rYX>S~>U|JKz!$KLa*+0R zyl92%wuY@5-^8}+B2@0uiK=jSF4*E#~-KufKh zViyk+Wr|?|4|=SDIEJ(b@I7jPLqUza%qWO-kh<)Ofaec^`ahVH(UsL!jn;I}N1)H@ zfqu{XM326bZ@vDbK`-OHmr2ae_gCzPL?|8-@a*8pFnhYdx|jJ;Zm!?bJjWUEL@yMi z+Gk~o1vOhuqvxK*CakN|X~%&RuB>p@e!}wtv`L`NTNS9^JoaWbpZedca#|8nADeUi z(a;FWtvIYFj#KV&*}oxfAaLfEN}*d_JriZsfI_?cZN*m?pi|8xc4>|jAkZcE0<~7z ze$m3x9`7m$FGqo)ZmVn>nhf4Bcbq(oL-7D~P4xQXBM?5xFb>o`NA&t5Bc5a!wkXp1 zlner7RCNK{{0n&pA=wYpJZYETnlu`y+NgWtnZ`~knXARNJ|n=Qs5~vWJy>_Bt+-OJ zPu#wi&ed;|BAhPMi0ri#e0qmaTQ($m9oOKRX{OV2Wpz$HPIf4w_mIt(!9)iIxe7e4L`+K zhtQ0jVvjsm;OCrx=ea=rbMCm5or_yBrcK60Z;3ne1w2%b7Z^Fq8AIuq-_w~$k8q4Q z$-)a;(@FxUd(IsaOK*@-!3Wq!j9Flr?l}~$i?a;#_4<=CG!XStg7Pn#pRZTomg%^R zj=UvK01wKMv%ndb_Y^$r)ZuPO;1GAX4V~0Ba-e4iEBTNX`#dBS`b&Z<8l91~<7U1QC0 z7vb^XXivfnFLOE?wDc0ie5IY)G9bdk%U}tL>bD5jrPm))Y@7p7Tk1CoV^*;R_RDeD zD2P){dhwW@v7-*$7)NT_#uj1Rm^f=jaeC8^lenP28KT^|L2!uMPT23`_{yi+4gopPryJH$g}e$i3Q=ktd=HTk|4=)yCCx1LxmR0^S89 z1V1;vBe=Qo4Z+JPaX)8?+|$0ifybI3gRQvTB0A~GDSwL2OA4%l6-I> zmH+`RE&v>Jr6r1NK?WcuPAAe@6kNJUz%#4X(y4@w64fV~jKCf!9CQdU|1)`)&CU%A{ z!+uI6IT?~F`Rll=wd-1glb+@<2mZ|Z?N1+I4^~FRRAMIvCNfg#;z(f5ew)#%Y&hG9 zHu*3s%A+K&VIYsvyvQ(T?65gVds1gXIS9Fh$~I2VFd};!}j9@LuB5%EOilzOB$+R z<(at$JpcmW@H#SDS&eYALFA}bl>n~_ywVwQ5f@}=fZZUa>hBRnus%`$0sN3$9`SRf zfz6z>q*HZ4H1kPmhF30pzmq3GNBo=P>oZ0#kyg#Fi~66G7I}@FU9QFc%lxr1>2AwZ zO{R?sq=|rpu+(g!Go^Qm=|XO6b@!sK+pAQhWmSE3;l65*h*qO5OW{%+(wbCp({mt5 zFZ!raiVJpnFJfliFdVnPY@_9FCD*6T%o!#%ND0CZhwMJVa}YnR><7_7N`|eMlT8E) z_=7OHqqYORWraOP-7IQKE$vMou!|=05oNatW*&dDi`KCMz8Q4}-emflAVgf{-VUS1 zCSo-^NMs1;gPM>yF4)BSr72}9H{z6Ig%`s!@zNq+*uJBPdn}0ht=FO! zVvdSd{IbIqH@TN`?3?9X&P&UL<^>hq50XP5EX>m;Dv>$%gSN*4r4-#3)CmK+wx_* zAdHL;yOgtw=84cBl)PME&odZu)tXnrbmaur(&nJQ6-G({US^fnb^-o)8gQfTC9p>UukNq((6>}7 zI~e|NnZ1wF#Qj7%`gSuMYdo{`@MMVN3i#D`j;cV#hp2qVtx zmPMRtZLv1RcWP zgv5(;M?Gl}U>FN-C9SQ>*K?j|L>b0{@r3Io7kkxYGr4M}>5)4W9{&G^j;*cx)!6}n zwxfGm>ma9LcEA3z%p9Yx8n(x4w~~Sk2lH%oK4m3wz2KMA0!5bXgc_ypz{e@vqg~?K zmit-iY-XX56F0|?)l)`D1BBG`}SI- zJfluzYukG_S5>;CP$1Ing;z<}hujPyshZ^sIYQNpC<~Q0^tK~>5KOV=8)SSn5)%}y zd^fp+U)Q65UHH)0z$oj^rdw2h(;td{c-JZBN(%2f#ohA$zb0>lTNiTC#jPKGrZ=}P zRI$hU)r0>zemzFs7;9z5v6wcAq6SJI2Rsp3ugiBO`(oa*_r6!_Ck!R0A8rkG|1b6g z%xz~gzf8C;i9?q3Saec)V?o2TKSzJ(aPyV zy6-=71_piLif)_xo2O-h?3Ou#pd7`ESSw{YWlUapDdr$IR_&X)IvQ(@;y*=Q6CNkG z?YTsF>oAU_y{q;ooZov~lj6B=-xl@1C&-pA-`i+kBgIGU8HKv|xrNqt8gzovJ-X37 zzcs79$912Q^5?WwV2(QtziHnzT+QxcuqR~SnnAYHgu8%CW8SJcw}bBI#7$=3 z=iwct;cZRBn|e&@?~SjudzV2JLe@+0hC%B!Hk#_Z->xV$t!UA37(Ha`(IO<}vx^F? zZx0`+;+XG;%wMa-8a)rbJc3_&zQTsDlMPg^^#n@QB$!ZoIfWiKKTRQx$ zj~qP4cf+4a5?9+rU+gQW1}s;rxZR-E@7}4^(xeq5U}gF$!Y>u`aTLIhXHeK8&tD;P z{{O-j*;bk@mS#>=cUg;$V@@7fFXW+W1UH7wN~L~fByOjXroU6)7i~ngE_cVyVCWm& z#mo7Un@$UOL6-R);hy#8*R*HlqqP;a6T*jJtWXggwSSZiV?G-Rj)4?E5wb=Uv2QD& z9-r=Xdy$M98e1|lZV~f_;zTco;`XWHgc~@u{{{U|!jiKnaG7=vBz74(T@wbOt99CuY!!~3?;B4$sNM%mYK+gE z;1jbomE58aFGXpnsp^}88Ac$NsKm=dftm+|NQ=Kgrsib?X=B0Zi^0I zEaBtOBFl8J(k5a@?5x2MNz32Q^O4UZ!&8_m`)89e0P7okf8s z>O9-Q0DDLG-$%YI_h`p;P(~PgjrskTAhgpOSr_%+!kuB`N8|gjN;|(E$Sfs6c!isx z3e4{>mU|_sz&B3SI1FQ{_lb3Ylj0rK&sBpa+&~UmeXzzT8UQ8l%>H))!hTR-upShT zR-&(UzIj{4QYqhb=9fs+DiQ7u99sWbEhE)-c6arIwz& z=inY^en0sV!%c&ehx&*wn(#9Fu0cqmYY*iy6RLBblY7mnb5;#bq^{wX^&YED(jLzC zud6+@n#!M}ojxPFsrJ}HXv*vyag{3R-@Sj}AFO>{=`%@x>@G@NYpC`qkXjzR1CZoj z%Y%1yy;XT{*0VEtvlh(e_c>wvGZ%bHD>aCPXb$KOVZ}>!6pEJtQC5qHC%GE>MP=Wz4jl$spGyd1iz`Ux4R!r0>6Lf)Gtj3Laz@!W`-w?>n zX$o1@g$nFe0VV1@V+hEdFAZIEP_)U24{0=HuNXQ0E3tEOEG?J>L+O(2AQ$0_r zX?EU~q#B>0ikegA&0i5XqhEcj(t9+~Lfd1BIlSa$=K zGDp1zEC_gw&a4%(ps1#5Ol6ZIoHRLUI{iN+$22=D2xJeAC5K3;JKYY7#2h&LLv{Y( zy6PLg_@MF_@5*6W$a>dUzR?*NNgl?${llM<8Qqi*%AARJlK0_#d>hM~oPmMl;XZtK z@O}H1oa7-AFF48v3S|W6F_yvPXBlB@c`mR1Cg8~D1+nBUjlty6?6CElEWR;YrtscF z|JoM$GCT3AnK(=Mklr?vI9;5Cm=y8pcX_NDO?9;OCf?mCPp~F*laTfREJrW=RQr|d zuTws(WdAbF9-lGI$}1Q3PmIIGu*b2v_yEGqsMEjgm|)y#?dtL6Q#z5%E<`0_P;SV0 zcEruaThU<1@C6SZm}Z4oyRjHA=HvXLADXFn@}cXJJNimwfbGbu@paY7J-O4Yi8oIb zrOUHqi;{Ftnr7AATq7OsKY(6kL}2(ChSY^tW_eaZB^sPp4}ss#NifI9kHTchfm9Aw zQpJE-ygJKAz}8fMW$}rv&%cZ9G1JKoK7&y~oB!3rr*!T(Za;d$^2Ey73Ca^YWt4a5 z>3>ijXTwjTH~Gezy%-s}y*>w}74s@*$829Luer~g=RRcs%^bjs#NZ{3k) z>1!;Uh_Uz8_f^ESoUfN_zZGP_Ffv~0wUkz!&qSgW=ebuyQFaiz3IrfiKcCfV%@MhlD znJYc&M{2odAGwW{TPdzligQMObO^jff5H^!yZ&QZ+9#gm%-c7fWUQQDtlbzY2Y^B2 z*+>Q?$J(4cHaPj=*?yiG#!AHgFRNmio=qsBN4X273P0_VBh-tY0kbn=ag4Mj)dzkw zY`qb+mq`5;&LC0C8FVHRSk*4$g%LMF!wv*X4up-X-(V8w-OTr9QTXz+{w2+l*4PV? zc`50oTI!TbI6xF6*Ok;4&_c~K%^Pg#N4~gmbzTQZ}}Is>T(zIw0@eq zm`6m6B*u>z#-mNB`G@?kTZv}?i~~4+=gw$^LF6!aq7;;vpnglGZ#1~bHgzwS-h^yh z`dW{RIHIodo$cPYl;(2~sXC+dn<6z*$9CrJ`!YD~JKLR1g7_LK9ru=B5>BqEJx_5y z*$3Z}ysF#rUu~j{g22sD1A_u!R1W$QcPUWP73-p{gejp;UJaUwSQnh%f0=w+P9YDP z2n`j1Qldbm$|4mO_?)_Iohs1=tUVfyc!U5;fzh)A+H=6DH2#~;mm@$s)_8VMnMmRg z2Xh5UK&`O;7D>L3*6v4OaJ-#Wg#k)-mq5T^CDGXVQWDGPo_7cf&Es;LNE1{%_#Mci&GdU7Jj3*m) zda`I3!51t#Dos)ESU?@3R}+%-m&wtoJET+hUR?FV1T&tHUYlSic9C_o!VF_UC%X_G zVrdWFwxhc|yNp$vWy4SR=97=%6Qnj?$is5w!8a{u2!XXv$gi)4<@ZT>GwcR=Ov83h z2&+nJ<}lCZ2T9@cZ$YCBrhb+D1VyoZ{F?^}^P!ruN`CNBLE?!)RI8V7OCBD;y!KHV zVYq)uNP{`p@oze~Rkxd|v^``k$s>uaU{^Qmq;bMSJ2LppPoxJVu&!~zT`3KkmSJ79 zi{UyIJ5jM5#gU}?Dny}C@=T|s zU}G7riWuWNSh{0>V>a5V-{nNtUxC-`Xl6nv6w>3{4+v#=rjI5+3O9mEXD~8!AKj$- z7ym+s6|Ri98kvv`G7UsmZjm%F%sm;F^ho7?DB@HCJX8x9k2WW^a%!Fo7Jh85O#>We zRj`-Ha4(G5-`ZDU-_sF!AsrblIbt}EGw#s~R8i5}6lHD7qXn63hLZ^&n5I0O^B((D zX(1L3tGI2~Vo(cPt`(J|D{ku)3WVS{Y&^TVx~Ndv{-pE?SuSAqlpD_$-2ujvJY2WY zNc=`bM%H`ne-Ob_rJ_CD$EmR$!F1;ulv2fnDCAE}i2n4ndP406H7`c28?EW_{6B~= zr*fmDPVOvZh@Fv3>2y;zDI$0C*siE9emuoTtSyn`p~CS_o)v+7Tn+hSPKUH|Ip7+^_@!(5dHC6gCZC#hcY zz_I5Kg8TNBWzPRS!eJVa5CE{C&)r3Mce%jFp~!wFvq0kZ!TDp*s?&L_I+X{PMi*?` zagu5tu8ZKzTHwrHjKn|7iaml~Tmhhlr$E4SJ+@?z;M4e9pp6D1^#fT$iS=q{tDLKv z?=@8MhUaDeR+za^TB}3G#8zcvM{Je!Xw>>R*g3FBF^PRWXkIMD<*pi%_$F{ZjC7vqUW4fOemdMN7)#ltt|b9a4RaGVjnd=tr2`8ug5+P zETV-0@!+KK$yR_cJp})IOpoLE_xN5|!ip98PP*u@JN>^UL;yCvg3HPk_OwwEe+zfX z1EG0COefq(f(L#hK%@S1%(T{Z4hS}Vkd2Dbi{hj^7+Q7i+}3yOaI#uLb)V)k!M|fBm@4=Lz;t-S$r6dpT~D-APeqDJwPC?(iTs zi2JpLsCP~n1V-ciS=V-|56(|V8e1v`)RfLa{6CNt2!~% zuZv5*o6Sie_XVp?4k$9gVcWZ5%XJ5_tj<$u)Rx7x?wj> zJ*z03vGcQQL}X+oCW~#C7Ll}aU@#80Kt1#2+43W)LH?PF$JC6%IP59w%`(SMp9;n| z6e#;JYi9E3wSh*5LBdY3?^XL~dx^xV&ULasd|XJdohe0M)x8gwee>ThMs1&UC9)T1 zNSCW(;%fvlC~F>V*B=?i!?I=Y%Ca7mSwTM(nDFHa3boiwP_N?y^ZGWmXCnwTrSEUs zsOh|85^Mi7cc4s;Mbjl|WnHdM(c{Eal`|n-(NYtj-xyZLb#kHU1i*(x2LM4+;MY75 zqTC(j2-S2FQ-x=+n#CGp8%(0ek?b`BluT$Rdl%OSS#i`hK$6DSNY&ic6K7@@btjEF zV+MRI#P2X~uaPO(c{=tAByrru8D4I*vLgy(C$)Kf)>XHAE828Wk|8O@pymBgs$&O7 z=P2MXMY-J3O7P15MdR@yy5>kLYzd)gvGh9lmoL`Wo(90>5PfSL_a;XW43Cix*eDAd- zF`2IN;tL4e#=Cp;KUJ$0curk`YPFSc0jVXCN3oK=C%=$xRhJ8mvp%FDm3fGf9KlM~ zKGhzrgsi3kk~2FpO76a9Sj`B;W2alMaQmoJZXdB{kZB&toH-$NnlqC|Ns!=2#92Km z1QOtQapmc7a8n73oicQ@c#5zc$z)~*$rNuoD(L8qlvC%IOk7xJC?yffEl}qbLX<_- z%gO%PQZ-@l7^sR+T`rg`UpOO_2fVX++e@uvF*EyLFb&G+C^6X(B9X7xLl3bd%7=7L zPwJ<#)6Yc7Kb$ODOB7mJO9E1`wPX~J)Tkc(Nz`hPsw39ssP%-Tg%Qzd6Oz_zIQJZ+ zKD0B^{qH1pKn)-abhz{~T#efX*X8xiJWEzFF|o33H(7Lw12q5TpG)&mwu`SBPBuj- zK1iYU-JRw%cdzg@7yg!{BItrlNYXT!U?-_Cp1J3N;Lez;Djq^AggiH<$%CQ`g#=#Z zOgzu0XU--)M|?9!nWNR1&b}BWHEA3TQN3@ghQqW;H$-i(Q&3M*9VMP|boG_WAq#>L zR@R0N)fvz9pA25}xzGEYpg$Fy_8M1(uI_J2sP#<$fQnUUYb}vM)8f2-Mq-*K2{H}L z%Dz$m6Ed|>SC?sJ`V%sxLVefBe1i0$p|dxV+?9(PlW67>GP4*;c>qX(v|;qL0>den zC8biYsOaMnF8g}hkx9nYCG`XWeSDVG3wbc+4^*p=*IMN}1|s~sJyOnyT6QY=Qh3RM zsxvfZ4|q&tw#uM=&M*?Tqgtjxsh{6RriU0VN95SG;A!7Ba$6nNZ>v@Ju<-gUZdTm_ z&F!nI+@{5vDd`Y~3Q)V7Xj**;P`!i0T3)4xOq>hYis)F1S0GsRiZu?y04oI!Hk~tR zgD^Y;ACWS#d4xU*BpeD|1_Rq5L!`((qb`epd#)qd)YOLB7ix|Oa|V{CiCilc;|6J3 z#Im5iq`OHzidCWaR?#~vtgQ3r>XllMP5|Z6QX`f%WFnhRjmV!N6Qd+NVen2Oj6W`vj| z@#cc{nDi;lkd9=0n;=R^mNs}K>Dd~~0 zWx=j_H?!W6X4V|?a{`{5jGfwx=nJf=s^=A=G|I1Lh1HUxH;OZM3qd_^6ldj;O3bfl z^v#r&X=Z_JM)e9N1tAkRjcBWf!9gSXHv8l(k5`GIC!uCHoc^|l0Z0*TKXcgwy*jrP z+aQo{>0;F}gXoyXrRY9@ywZkr<&}%oHpg2Tao7YX!XnRpL?M)uUG`Vz z^P_^!)LcZUzABq8SMWvs9cf5Ms~((l4hJCxZs@0)_LKsN>BQ0_^ zjAq_5nLA}sx-&pxuCC?UaXAdO5+mf>sSJo%>BybJ8SO4U;Qr$7^xMO{p+cSsv6@WM z_^d*i6vj#f{=41#iDVyUEn(4zS!GkzY8h0``qdAmSr~uU2@qGS6atm(d)@bl*K{Z|wyLZ6 zLEN8S)GRjxrTrwa?-{sCppx$u>bpRxN6Gh6z7f5k6R_JI!8_H3;ymQ(Y{n) z(KnJ=u}=){DQGh&DV^_W(e+ZJA+WmOul=+rd+?<|bN?n#JuQkFT|qllkZ56a1-+tz zM9HEnXtfFw9g41?-x4H>61&~ORAf3&%gD%Q+i5&KOpaFG4ko|j=AEwNc1cpXhH2N- z&;U`@pL>-P{Tl&`0t~QuaI1O2BEeoU1d`l?8uLAq?OA4&8DUK*Y7}iSb7(7PZ~kMl z&(1=dz$MXD6kth-R&a6x^4p_Hak4xlD`Q_jAs)R`Fh43;YD zROR=>AV}Htx#v6Az-O+DAMz_vpw^Z7iR@3*t{|Fui5Xvq4YZB1Pt&7e%N8(x$hV3k z3g6nZr7k0cUxfW8o<-Rqh<<3q|0cSKR3LRp2LLbgT`_Ey5VpZVRPb0yVVnDb)l3B z1JA?ac$ei$U6hq!XbCU9Av|^hTGETJjf@*-Bmz>dPFs(Sjb#0uOXN~ietpGbn2xFs z|J-!uEM6;3CY6*R;>!tBsaUkoK88H;TDM7!kecjvT>41@cc@G%P$2N^T&|eb5^nPO zn!_uuZw~))LUZ`3QO)6}ae|qP6}5-jXpB7}kL~6|FY?N{97lG>f`jtT!IZqGcyA6r z)2}()z;h*k&+^xp-yD99=PLf5_fcBsMlZATGcwdytggRvjcV6g+sx~ZoU0;VsK2vG zMWT{1XT{o61o9KLbEjflj%#O&q}FH`wQuKwv2u4!ps!iI1)CH1(Q(n{#Qi)bG$&?B zH)^!5S5CC+pO{0C?ssP{uhR92YDuQA1*{d~$8`rbf^=;gb8qJrl60{Yv2TJWnY zMb+B})U5GWUD%xX0p&2E*T~ab2fTuMjbR^3L%^Lls}-tbZb=UoiYvpSYLzVDiHP;%D$m{Zf(w{EINDhFZmaF zKg3#HRd(E5D>)b-)Kot1Y>KbTXUO;+ZOZgyqD4(@;@^;+)CeC-T*(v(@@#;ZX#6YEHJ&839goBa3~h(M%WoYCoX-!&6w*IMW_22Iaoo z6(6;qmG-$Al#OK-@HVy=k9hg?1V=P7>1g}6a$CxD|CXu#ReFt@?e4wb;5-pibx}IY zYDFE`n)I@hx8KQ&_z#6{|M(>9V@yX_70-wmG5OJ8Op{90M*I{OWo&;2Et_|EAae`*r)T`e)nE`QqqFjmBf^(631DG(vs%OIKI}yL$py zM~54YhpvEtwBOHa0-Vc?7kqd^M&m#1%=HIrJM~yiBNp4B;t;Z;)vj3W39{FbhSJvVdb%Bku=iXqe_`3U%;Q(Sr7l`ZOKED8*^Zy6nuxSC7_0yUEdM9Q51E{i$1qC2H;AC}y^BC}bK__MZ55UR5=tvsX zPBdm2M%_3;xDpB~_(`=g6CGPU{` z3uFlm+4mI4E#|(#PK+Nzl&{hQvyttV9+)>`-oUI>J1};){|(}d3=ry!UC)9@yQswo-9|-!FV8IhSp4n9g{CgURcCl?j2c2Rp;L3?0Yi<{^ zzCqN9up^=Y3TS|;F8}WWlU_0PQd!!)K!B5dyKu7di)-C(YmJB7{uWf% zTG26Rd5Jaj&&&_{;#^~a+@kK)7k`3R`GUR}@jrv=@AbtEf2UTDXIXo{}}_>R~>ADyTpJdiF( zgY+*TMG&Lc0#eB8-5>oJld;AE*)Mis$(X+bhKHMvBcu~sdkZvq&Z?G%so+W-Jl`( z@COw%euUr*@2YQHDYcw#;6+tegf?=hrA7nTTLVJ1xHz~s zQvpG`-qG#Xkn1@8(AvE+9{T)fl$@2yaa=;KKZ|7=UyY1XyjC_gSiY1{CoaNvzJ{x> zvH-8sdF|1E2`MN(vxuQk_p?Y5ki?z=D3k>Gs+!EVl!1>3-Xwu{W$bn9b#3Zgso0_J z-yr2Hc?&2a3Vj+9Bjn|u;J4n6|J5%kKDrjzkfo3z-Z(@ss;bCXxiBsucUO{C07Jso^%WobC!r=(1KlD#^dE zlMhz$>y4G4q+@F&HcD*!Iy$}Ph;l-5s0E=4j#4_P_U+jo4^bh6*r0(Sa07%SIDoncK}m>f7P zIB#&>_FheQe|3$t+Ng7>i!>95`K3W3uIlQ#8ZXI<=_DD_s9s5?cu9VlPLf%3BwLTH z*KYT6l_Yk)sw7MLwpR&fspzWjsp#yQBU!0(_1dTANT1#*Kc1k*>2ejFQ*$Jzcl1^r zeU^&OtvQn0JNjv&Wx{rDHWDq}9cyOl&ev#bcH)d3q)jAriZtG4AjFHm*BkOx57B1# z+q%|K@#A`C)!h>N4IO(XW)gZqvkKc~KDUtAVwAAF3EAS_JX0TPKP-ww9I=2WJp>zy zo{79Beb(F(S95@(n&S^J2Rf&*p8d2u~9VE>Y!- zH|3}UI&>se@%X*@{;5(O)|KuO8^cE3H|3k@A@NEdb~tbLxA20rMl7MIHQs${x=N%f za{_WWUMT5N2b9ESE;jpv_LmM~Ir0U_bZ7f50M}9@T2RssePm}ZlI-#ONBOWXx-rA5 zmuTd5F7iN5!S+`@)9wv`p0=;R_Q(% zPah=dgLV!n7fBxs-D1@*BZcl|UP!w{wF|2}?#^5JW@&j-o_6+~WAtz$K{o1MK83+* zAOdmfr{wF&?{J$Vb#V`QXy>}xot-ev*4CQUr%5;Zs?HCU%wN<51hJhVYZI5KgC(tV zip%Z19|cRcRDBe@ZOfY9j66HJ=SwNB1L>5_bt*ThOgZ8XUBZ5Cxp1o>jGR#fg& zXVa|bIW&-tlab{@jyefogr#pn)?KDzS-dK&V2HUI`x5KHneqF~E2{IrsFpxTx-*pv zy-diE%Ve)Z(~3gVcw%yolJYp$;cYT+W~Ipqs54z&?a5f)yYz*^OX%m@r;$wxdX)U# zGopRG&>i%>ttIs;%MvM$3ph*F;|U3r_H(**UZ*&@v4<7mxUP01@7SlWeOCe{k_WBY zQ@cq5hB8_b(05bS?HpK0Sw0*%mRwx*?dC))rv|=hEs0G$v7T-{`7$rfi6$?2oeH)V zZQx1gEhI0bN-_!W@aat|bg>SVJQDggp<(MorJ@wykcHI=BXOl-Z`9NWAyt1kg9@Ou zs+X*U0A+agmQ*cn$G64p*Z>tn7F7qR`>q$PAmQ7%MVYiw$;60G?HWPdixLul?`hru zw*&(8v#%vEN*-RI(g&Xa=~`rx7Dev(;Y>Ra!e?ACtNOOJ*)rJw#!8DeoK%jyAI*vf zrf{n6JeYq5#bA1waIBFM{(ZtJS6aicK6IIGZjJXTXGCW532Al)L{5zW#kUV+xZ{Vj zjYoyQh&MBd6^dIw98Mv^hi-Ic_sy{m4c!t{_!-=`gUeI`ZWwsOb|kOd`L@3^xGh!g zgfe)#+{{~Faa)tX7pd)_4*$I+!Oo3b!jn?c{BLJcU3%KKbF5R^Z`(&9|JH4LjODMH zw{2Ao(?{Dg-as9pI!CF3V8-T9-&K7n&$xO^8p>;i6>p`t`tOHx#xL9pITBrV*t&0o z=|o0=_6556btZl3b-Eoe={M;B^iBv zOnsdjmtiSkEp^}k9SE~Z;_g`$sQ*~?-nJdKnu%W9L1!5*XX5Fd+xA$C@^}w9p?rXF z1Qutuzq7LmzY#1O%D0!;EDaE$FFDB2Q!ri5@3xPyi`OCc`XM?#*C|)Cn^U>Y_MwCT ze!XPWqpR*SppPOU&cKEGy1*iZN=_D^!9qJBz@TfQmPQXw_cE_kqq}A8gVmJNc<6Oz z0D_~swX4U65FoWd#Lw1L-Gk&H^b)$j#Jin+zFe2)rXC4PT4(=7t4Ac7Anv&CT%jLJ z^<$xa)ab`u`Y}~MCg?{%KZff^p?>7+hfhED0lRnw)sHr5i5^JoMqXUp)N}pu;I*T* zQM~un*Y#Jafwx4BeC!=^%9zR2yGkf>@(F2h22Vk-j8t{kg|Qk2$Y-BvtUMT)_smEs zCs1FEat&lEi2F%mCnGMA`9^@w+; zLL;M2UocY$Ov{$i7B$wGXeW=_xG$u*8a}kaOoj8kQ`wh9d{6@sH6-^=S(%#S>1vRkGM$P45p@FC!e}y`(2t__aO+_0Zdofs zHfC~?LA|2lSR|;|RQ%l$8?0@WG{K?!g0(v&0B<`X3qudwHi@r0D(YDcUUk+wk1O;T zwT42f#d5On%kG7+*RaB8>4_{P!y6ShcoVC_l?S9*dKDZ_0Ju;pe-1ZS_-iM9lpF}GU z2*q1(R=$pcujzkBle4vBsg|i#_eZ5Ftd=MtVplo?S19V`3|frgheEG->&78b=Z8b$ zYovVN+&jFAZju#nI6({@?7>kaY8R!~BRtK~5`it~2MKfwasL#ld6H@QbEhD?DS0pUY}8^St_xC^52UN&GegK%CetTk)Aj{f;oQ`> zRg+>pY3Vk^RV?=k;pK4u;YkX+1S+)Pr7>Wod@)T&a;{?NNLTdy zE-mxsw}h}X_}ude=^B`svgArn!0aWDekOBJcXYsK)WLs|(!?u903+aLVTij{A$xR4 zR9vJJL)L!x(KC;AY6EZF70@+*qyW*?uL0o{c~N$J+&}P%Ie*N`{T@al=v;qHsjhZs zb?1{JB#ZGbOk;hm3%SQSp|5ssbG_BWw0~HLSs*K!o`%03pr)aR12PTUU*V=~S8GPm zn%4-8uaQ~nYb@mbIT8ICp;j*ujijL`ZscW{Ec}8-z8>uA?SwuyU~VM9WDj}6^U|9%JwKt$S#&cGQ6pHGjV3VeW|@jM$bKG|1l;& zufqP5!n$*Mnd}L}EVaVbZ&9t=w$q~nRbT4d_Mz2KLt*x4YfU{*XX53G1yd-s%~<|+ z)Sj7-)sc7HZ4+fqZcxY|%gm+d8;QLA=ZeLPE5;nW*vk5%Kl&NYE?I0eZ(fnuCAPYo zVqX#Mv0am;g_^Fu&U-g~Y=3PZO>hz`07jgN1QqeN6>u7C6w0taLNuN-+zM>aQfU7k ztbA$;J+M$^j~3zSv8c#&7D;hE3(+Njeliuq+|A2k-m}SkHf)y`;co5)v$A7t0SM;) zZVaG`KE38|PLdlV*6wycbCD>zBvrRxP8GT|MrBEd~ivi8$CL4%&G|%5}+Cdh?GFoRQ?#lwOAN8A{uS{nZ!XwYcQt z>fNY46&7#Az6=I=o3r})zTF7VrsD>c5);~|M7I6_m0cypF-v@3)*Y88h<^qMeZ~ zx5MZCSdwD*hah*d)a#5n=S~&9OrlqSzC=rqTcV@S*U^?ldmdOWl;|^cbeWF+zC?>& zF}Y2NKEinng%|1Qt0eji9es^NzeTjI_gu9bM3~u2fU51U*?nxIBw00}B&pQi6^mqy zO-{iC#hAU{S3rNlW7QDdrVn{{>nK;`FURZ44KXXlzHk#gC!1AHb>Ks+Ijz;XG9MOE z0;YLnA0RjXLEGkt)eQ25(o!}#hcfL*u4(6eY+F7hTxbzZ+61OBN~>`=bEG;q_*?-4 zmde+}DY)%j+}}w^*vf4Q9VrkA8qeY0)AXKG75w--?QAwnVr`MijaNI*6c2%N#4Npx za->pP0#rh7&>yQimx4@G+?=c$n30QlZM@RSyUTR0W7)^6^@x=V&C2`tnJ~WAl^qvH8@;2FqwbD=;j|X36zkoA31h!Y(Mc5PAXQCL)sYCz=yWT~@N$KcEyy!YFdbo;aWz*63tLUoRB&VsO2BxEK)=^hW)KsCK zwJlR2vO3>b9a+qwfZ0gVYJhOfA5Y)Pz{9}$jWt|o<5}$J!pMs@AZq$2kX64zacSfvZbFW6~&c2*^ISveB zvZeAhx}?v0tSu%spK3~TeO0Fl0k7^CsXS=SZ;(PEE+yMghKhG)&VH3ky|FQhP^(o~ z&d+X^!M4AAmjdQ2bMzFhbBM20-Ad*QK=qg}l!FoCUlJIypHSu39u>fi1#wAWEDJ$lWn}+KT`qeW#;2ybhUWxCtnSh8OZz!`I{Vb$BUIYTidD$oaFne!y!DuN=;#IVXU0PXQk5P3Wr(7sfZ-Ygm^& z*-3yP1RTTlqfkHcd1xx34C7-LfB*psWer;yW?EWk86&S?gLgz~i za#nRaLv>W)inMIhWwKUu&b?HYZ|A%cO6bbZ=~~v;I4;ayA>&5h`P{xF$LDl~Q|*uK z5S-^?R(Dm!!o#Y5eB6hrG>MGG8zN!N|5` z(KyMW#-{o&u$j{382HB!<|}LjW#G{Ez0#7C{^ISRPaj|EGC*dAWB&3+Gk)xp85fzx zulCS1r%>b5W0b%I=p>LkEuB1&JAU641tMZj=gXBkp$2s^> z!^eTlvo3-@OAuSvFEu@MhN9`JG0wySTpk?ri1oq(Fyg~F>kv1^|T03qu=DwXbx zqBE?i-P$@k@^hk}RvkS2lIq*B810$7uI6_VOQ>q%7 z`U9%+`OS~5mNLOpU+TZ)O>ii+l#yd9N!9LU71Dz2O{_*@f=DhoTpF@E+P{VHknpE^ zgrCKURY(W_tUK7KyMQqFy(r~4WBPqh9wXy7v7&#Kx?m)nn?c*Bbo7x*6`jFj6-JLF z`ZM0$pAh{ydLG|9IRW*mScZx`f{%)NYtrLZY_(iSh+$59DfxY=0z3S8eNxd>Z6+wY}2G`_~?JPwxt`teJ{<-Wq{syyrUZP?b_ zzYS^4q@{jD)9Wxi)h6u2yu3}^MCWTU79_^9D%Vt9ELH|Ls>WsoNV72NlydowrP#@m zf>$uDA83$e`h#}CPc&BAqPV#$x9>QLj`3%5zsHEnFBt;j#=63uoy-r`z9?)*MdkZt zjPk7!JCw{-gU*uJ)P6rv$TO9GPHRnR5`OV7(xEm6%2-qFP(Ai7@`|`au+8N%OT-@E z5wTCFASnX)aVfI)67WTAz_k>hK*N;$ENk|Y?O#=;=*D6Yb5jP#HFtl#bCXdgXK2Qn zO>1TL7@^J1h`vsw(|T>&NAcZ$|3Qt}SUiE!1Pv#S;j0##bny*6eZMn-4l!GpKw}Xqt@<5BFhj1M!VLLgMBc~j*U?{*XgRYc+9%Q1 z>S%ka%AFe5uAIej(%C^e*c?9uh6+iOYVV0f1cm2-Mg4HA#1((zFcHN9l7g+ z0mt;}&w9T!z3#LA%1Xjxs(wu1!K7=V1UdG+nom@J88(zK-0y{?tQRZr6f#U6H$$-=@aA8y@WZf?%@*R<8!zmn!qwWT7(T! zv9d~iz+Ll+@Bl{LQ)E)BhA>0B-R6sB#U@#2>h|9IO=9K9`U&K(>`muJoN;VTPgXnA z0_h*_zxCRV4%ORHm! zhIqH#AdPi9I4V*1;sog)5pln?bL%^D7_vq>*R3Padfjt{EJM_Tiv&elpuJ$wV+`!7 zcKQSq*+`IkG1rT=?~$cr}7=2vlO}fBQAF)+Ki2sxTWs9x#jhFf=ySR#-N@3P91xL(GHm1m(b zB)j1cv|wm>1ynyLlH8jqG8itGvJ$-S=NkWc{hPxZF81bbeZ@1@rutZe$jS5TC#_7j z7t~igTOV$cJL5_3&iFcYXPg~9m#9xueZD`~dHqyICLa)#Iql?*%yz+54fkKUKkuc; zX=E^bscMKpRY7xjx#0V9uZz4iRd20@t>|i*Pz-5V4lRpxiBhTx1av=)`#^uL7p!%3 zn6)znJI{=-H(Ab@f0n={|@9qksWxv`emvg7ELQt*x zrZqjkBqjZz;*?szW7V~KQlBn_{hPYd6a=5>Lqhktt}2yE zQg<}bJ>(x!pVnu?1ocHFmsFjPwyJdr*ESbQtDt#jD36?-h!$cex5VoSm6-)!l%3w3 ziy~WEp4U~LoZDfM`>e}bUq6W(y%5&GMMV>w2%CQ1gc3;6?t8A(+oU*6Wy4=2OG!=+a3ImL|O?}e8zVrbfBWg-wYhtl~0m(crXgRvvdq z4D{Ub8j=yhCuaPX)_pLa&cwbqh`DP2IzeJ+B^FVG$zxdxovmY>+8q!_*;WkGvjd+B zBIwnhOF4*r$_U1Hacy*iKfdE=yotS)KH{^&h)3)4Z@n2H;IlP(wOZWa@DFD4mc|UJ zH?OZ%@l)_4-Hn2??GNUV!mgn3Jjam!u_~5AMb;J|y_3ajLqOu^w9Ol@wZ5>iYK2R~ zR&03KnlmD7-7+fTB)&#sY%T7K;Q8V@UY&(C6du9Zp#GBC!q@A31#341PvWcc&&bCb zP5*vH)^Nt)JTq!M5mBe6hViYi5<4WXe;okChb+EFa705A$%ubEy@=N?MchTlnHt(1S@D=$y`aV#5Z!gHcIl!Nv%{$4rTi^ z{w|rF4oT$%3u&IRm+AzE^O~!QoP&9%kDynh%#v4(2d?ZR)y!#&SaSg68DDjO0SEWq zOevpSqn^_iuO6b6hMVZfVG(OeZm=aGbYA{7evcnXbwPR59-kXTy@$FZ&Jtyk#+uR^ zKh$S-j#4DR7|o$<-c`wc$5_c9Okz6-qP zAoV;DzO*ocg9&PkT^y+lj}mt!Lz8Ap6ST;)+^+Y7N)Uodr9Ejl-u_C~ReuItcB+)9Utvp)j=*ryNA6|%J!^PVDr1E|7+<5hCU){Ne+;7vAGxQ04MsJOuM6et zj4vtPlY|aR4F&DbH7t6#od^FnF{!3 z(5jmj$P$yfK^a~BY5@HQ2r@;L@IOV6 z!5Xl2ZomWVOT7Ra7(~q!z;MaP+kEvV+rh*_{W^%(pXyhr%M=vE=d}8&E|o2QeAM@< z&TsK)g51Sg6}+GVthW_+)vueo;y$1+mMfEZ&>uBjsP-rA>(xc0fy8%GpK=InslyeA9TmmCzie zy=UD}fEkp9@um*bzAR$xizHnJBqvH*q^nu^5##ZF80*Nvb{NerpcqWM&CWJUHr@S_ zS+XUT7w-tfa$3rZg!cC4kI|y2{|`dr)kW+DYvt`&fw5pFFZTFCC#%@BPp7_DVXYiXaU0wjk#$@lvnZfY4-Tjto z=C?GUegRa57(g?nna_`u_c5h9dgs+dKcJ&WOFJIb(O=fl>m@p_qtBP;9GdqH515UT;p@^mE~}v&(q2pA8aqAxI5{`#Lv=?C}FZ z>#(&cxMh#{xv6~*B=IFS-Zu-xG3q`O7(4?)AM+jsX`{}p+=`NeGtP?Im%>VL!aq1- zY>pa_&nOrLcZ|jO)Hk9fpWJf}!*MCL`3oZ0wO8hItAQ9N!h;zRNmZaa;uPHxD#+^! zabFX$-i~bhFkJFB(#(4=4AyQEc!RYlqH({&&t;h#28zm8=laOD_o72F9)5Fy7DA@_ zg{+$ghKo0btv7@5!*gd825S%3ko%r%L)Mm%J#e1nMXa9Z4-RF5%_vm*>hFg7wt|%l zT#>)X?pB)|1shgY2vUrk&SRB2uX6ftgC@HVU8<0!Tt`PF`Y_diOHtn49}wNu-QDxC zYkbtj(|26CQin=T*g6Q-md&j+m&;;`Ij-U~0?g36Oa)=_gHj z{1VmDzv$?89;?pM(Fb^U6GV5(M?85&XVodvKzp=`O&eR%QiHBW$o%NO-(0(Q8HIY% z>Lw9*{X>a0^6LNyal+GN0)0A8jvM*fp&xBLxc0HAk*Az@ELcUYV)~8sWVQ0{h|_xh z8ROe9hs_KVub1zWV5`LE3;wOu@%z})rsGRC;a*wavk>{SNAFiFvt_;)bo#@18Dv3< zAEvyL%|>*y+R+(NoEa8xmH8W=-LNp7_?Z8&=%&Pv<;UETO==%VN-jQ1C-smZJL52S z{j#*BBh#2a0`OXtS9jSgs=eq?^h$QHaweKcq=sCF_%~Y4GX(XJH?dLTLac!bu>oZb zJ||`9mgryZgbzF!XJJy(cxO;%BzdGT;(v+YL4!lqw$RY+oYx`X7##9{5-R=#;a!EO zs2?kg#5emR{>>yDaaq`UEj;v~n8ZpR9UR6jSn+O=hlH&^2Z#PS3_>J7BY1DPcrOWX z#5D}-x}Q>J+-c!Sg?Lk=teV9GrH*7@SuBiNUY)hSTqA9Cp zMdd;HlyQ?!vvPY&oiZ0JUumGX2a`ttdV8pNJ3vP(w~uWJEm9xQ3$AbfGu? zbAHNkDQ+#J9B~?<7Q{O%6cPRqKq@f1Sts6T<8xN~IJo9btZxqI$vKuWe;hCKa)R}K zJG|Nnh@Z^ZP+VAw*U20Z+gcG`B&toWc86;;l5+Ojq<5KWuD=K$_Bt>7Xs7wj6TofMqzI=ZJbdrMr5(>ub3a;kO7hL0E%=_W` z_k#!iLg7`Jyq0I&QQ{w0f5#PmcB~+6uydWPGF&YwnbQ_~)Fh3`@oM5`Fe+6Z@Ey~T zjPNru8MAkY9Renhf;sBsvlo7R zg*r+axr)cC`vI3_rIB~H;6g=<|6ND_tVi_Y5`AcxioRP%&+ZW|IovmO^mRIVN{?ts z>OQZdN9gEp^oX7=(T@_{lO72EV&u}=V(mwosc1_SPrB_zpnIAhsj!mJk}2)^gdLCX zxjm3wxQ+AEh#ugD#rUBcj#9K>lKoZ#J}F$n<|_e5$fH{ zp-3*lHBlqU zPk47fIbUJH1|5BGkLYTN{&8ZZ<)P(&D- zwD9~psWl=VA+1SGCKQopW9MdTKmIQ(tZix(nUYOcI)hGSS~hac8rQ6I+QvJjr?bk$ z`iz@bbb9Ixeg}-3H;f>ZTEau#FRvdqAe9sL?Jch_8X$p1jO8~XGUfr_7mhb+{_c1S zd5)G$X*Ci!lM>?4OU2R|lNnOuzNCzCFV^G!Gv3`JY>l8DyLbmJ=JtqwP@><`(J$)g zn|nl8N%R^W{c9Z^=n*YR-N$saltkg@^oYJnqN|DSTHd<(-4oFVx!-#{eee+`_|nBc zvRo+sQKZHm|JYKNOJkAQ=E*}%2k&G~Q>E_wmF0*rbI?v}O3m%wA4W==jQ9ewc5V#Y zW>%POPItg2B#Yin@Zo*>r4*`ZWaZo;u>E5}v!K|6pP{l0#|mVof% zz7$_*)>*^5IB>5mj9p-?>RyvaTF1JAcen6s-hRGzZw*CwZ1O%>L-cPy%jP3hDhB{uek zWbWu<)D+=70oE5$Y`DCo>1TztURchtnV}_3ez9xd)KvJ}kedL-+?_PcJKCtV_NBgr zep*Y0G|$8*h`#gLTJ?@uX_%;gyl+=IHP$7a%@)tpUub**tp=^z0yLgYxHNt+LGH5i zRNovToajGFG%^y2K24%6qCviHeDB`RV2?M1=VA<{3YViz@1l-_s)JFtogylPoXMtI z3Hp`DPehAG-C495VtW`W%9YKWV82`5Pd0N|MeOE`x(5gWsic{rCy_@^ z(OXMhqUc$fJ@60l!<|*<2oW4>kN7R;)Wb)|UY>J7nVq*>G%Yq^Oa;E@EPRUwOa3x@ zbI_)$UHYN1u@PO*Dnk(qAt)!vD z`V-_%rVOG7=;-fA^fn#6f_Jw>NAKsI?j9@Af7a0*5`CtQ-ln6!BGLa(NAH&CBVQ3@ z38lG|&+!{_|3G>@PCvMlqDW5b3zv~mWVUcLphsn#BiP($@>|? zu8}NP1Br&8KXy&H zMMx%F?yhFFzlpX|r1F>+3w)L%z0kzPo2uzZr4mtNjfGW8k-W)U@eGy^t2O;ZXYsN5SLc>E=`G}A; zp7X}>0lOmK8qc&Tu*PR``wG3rTZ=+Q#gULzJ;aU;w`LSrGX~kQQHYPMa@3%1&NZUj zIHTW+jrIupqU4UV%}30GxREVK#2pUslv}!T7KzqqJ)b=l348EM-SnffJj)(Gf;>uV z;c41dvc-5P2F*CF4c!C~tqYny1r)e+0gx8A2kU*(=g*x&A7A0B!H&ZW9tHr3YK zVe75n!M8Ak@jj6}UI`C<7eU+PaaLa3TF;I>;%{Q_EbC!~v3zr+Hc5$vk!1VXK~9sA zZ#aty2-!1=LU#3#a;NBQwo*}Vr&XODw%$uU!qz;5j(A1ofr$S=`&|sNfcy~o0GX{= zULUxvAd&*>CB|bRZ1~JRlvb1~kl(QXaM0fzseBv3VbR&730v<1=%JwXR(R;kyzLC* zTGp%iQzn`ri1;dB6n3^OM7N-XFvMycMRu*}tx2 z)9l^dGh+Sm`x&J9Y_%6W3d}YGa03I-mf$vMd7wHQTllGaklRm|f*FC(1svStcwP1d zR&v_HXyuop*u;pa+k14~p0mStL3rr4ipuST-<%(*U9bBzbv6*mC5(0RYMzKZt_?vvRztJhY7uOj$370ms>=itmN8u%iyQp^s@D zfJDJ!rb0dFVNm?X&czA!2fEcvVD9$GRmcb6zR@iXm;8YH4q^KT1>p;RfK>Pg1<}k~ z+B(;V(1`7;f)gK9KgVHkFRIc@zX<7byt=?QHw)+4g$N;g`V$hZy2TKI&h^3g-2acg z_W+CP>iWgcnNwzf>3s%Jtg-iob%r@0Cj#zbEe)1xMq z7^Be`#fBxu7Gv*5QH;G8=Kl6M!vH4l``!E9|8wv2e{K%!Is5Fg_S$Q&y>?l~SG&Cx&wnp=je!)(B;gAXe#*Epw5LAq zmvTrM^|1xgC-?q#^o1z6?t@DL65P!2ARxMsck#GfEPXZkoD6uAAeTbPS|lV^z*Wtf zenb>>B^|%OYu#0XWr^xjGC!P+ptbo?lvg6YK#=mpk+ilWl!$Hvf<^7{K76P7f{6Ia z#1wFkRwi5lfM9WXI_x4kwd4EJEA9<^(VO;kBMBx|CHQaYWAdj*!Z*hka*XxY`T8mA zi42gg2=mVx|K3H)KVIuLNcleidwF)q-{v3s3Fp8>+#P{S&`T!z3aE-7@0b68SQWae zZ}8{6@@a5#7DoXE+H)1fEC81Rp~h0erjf;862xMPf1V+}es~)%qPLY6GYSD`oJDVv z5YDowF{pM_1?O9{i=EqmPD+-X{!e;c1O4Q4nns*J&foD3FYp%BGZm-|Slv>-SPC=;SABpb34#!T*h+Z1 z{9E`yQSyKut&q04Rv3tLeMBT$1L*Y>V&TvQ3Uo-SSaL*Xu}JiIRdt^-U@t#zC!Mv5 zBfbhp@`I+;WArWDK*Ct;eE)uQ_>DY04!^h$Jss{KF1kPT@_sRxOX|&w;573*7EKmYXY)STnl&IE0?TltfQG`iuRmz3S^2?p(WTd! z0Am+&X))u1P8vqMW-MPDUDEFXI?|)+M^D;L6#_F<0S)RY=%k7E&kBfm`bN@XtLNtr z!h~e)EYU~ZwUCmKuKd7TDiI%yXY^EJ{irTWUr?#P?bA_1_M$5K*rZl^5VlAUJI<#{ z3Hn&T6(+L4{}cjM{N_x8#Ed5GJ9@)YmjM7^PZ_6tpqWMl9fp=zLyA30EQ; zV4n=^ zn9$@WA5G4Z@yQ=1ktWjV)mR}b(d9a!3%O-aq|0(xKoigjQhN5xS z3dRf8uieG+k+z~7vhZ82^PE}l~rux?;A`n?ck$nGfwz#*_i}fK&D2KT6VPJBQv3mZ^DdFLqb_%;4izPgqK17@nCXIjzbn`66YjP*Bz&H|U zVAM?Tz#1QK`C)Wb_dmvr>`K32d6s{~x*{G)(>z`&HuMB7NIg#^&Mp6;u!>C1Vt)Sv zEEt>eV8TQsyon@?p(F3ypN@p1#Dt@K3EwY&xhmlukcr}0n{*qZ;TlsM1wrdyGw^rx z@t43si8lY10L`VM&;dzO6#teC`yi-E^Zz=2#!i@V)SpdHhV%ZZ-X)$+(EByoHSzy* z`VU6J&(PnWdL(@h#gBc1jrt>DtiKic?tibmFJV4{r003NVtMW6|1aa8E~LLAwe)Nh z2109*KAC+(PYRn$i{4m477fMiD~sGprc5rY(U(Sb`k}R0ogTMBb$SKW7!_d)oXVH! z{0+aaK8Yu#6=1{WD8)=8F1vb!vn(VXX4{=OhD4Nt&XtwU?|l0I$QcKP85qTGcapJ~ zc<~bS+4Y2OBY%0Le&mc}&dSZs8AqL!rI963v=dvzV@hHh(s8MOMszW@@|4EX?tN1a zXr_HH*70Z>J6x-l`&V=#?LF=iA@}!@&F{{_Eu-)sJ!!Lequ-=5(Sw}$x|P_r_ogRe z9#j@bwhlo}F|qw+GU2#gu6Is)Fca`6t`cS>V>eEj?D92yI;T7coOpJ-Tvz3IRC1I} z`~z52)i>;sqqbvT4LO+x3aT48%qkjd97?+9US5pwg^#qFDZju1Rc*Jptpyw|5vvHC zq1_Jk9!|2sPKmS8CAqXv;`B;0zBn_qVmMr@;LjN3-OeNEc7Wem0BK)_%eMNIbSH~8 ziz2sH^qx}sbVj_0bwzv3_imSKv1)$86kYM)9f!t#qLsLz5ompDXL&Q z?rH&s36>b951h*1(1`q$E_p8{-b8T;ews|YUxxSJ_b1W1W4ert(GHI3kNtU=&@S4G zsp1Mg)Btd_^5e<7Xsf=vMc;vKpryz~ue;&=SfxOYtSe!slZ)Wzl0`a2tFIEe7j0+) z{|e*VWX;1nsH9W6Pz5@2oS=6%&OIQJ>7!$@%}0X6T5+%^+{m;l5}?XeKmnay&D0xY zg0l!JKq;VLrQ!NkXHxBp=ZZKCw9`d%yC5?3gC(z#Et@21p;#_R7eA9po?>w?Evavq zukvt0xZKl+X!>xJ$U}Bw5Uig1u*%1WKnXO#5{X+Mi*AekPv>@qj`8k}A@|cFZUN4! zAqZBek$}(2I8oT%U80VHXnc1S%qKX$NBG8vb_Z*TV0~IN4V!Si(p`z5Ai>#(ZFI@R zCs3NikRA`&e&bV|AeT@D92bg?M;4tb7H>U{D=LdC=}imar#!7A3URtk0W_>$k0PRQ ze7Kh?2o_fvHQkKEtOylcjPa)_k9f_SYXJ!durU*H7(^vAUO?OHK%b|y97|?y?0-NX z`Ota4a@r>GTn0_Q&C`yrM+8a}c?3<<1T#WL7d;Z`QDm3SgWOSYR|wxg@-qQ-c^XM9 zqBvx21oP5bHWnpO`Y4PEc{{cUcM(4d6N)>$?JN=M$S_5T3)@P|>wp|G?4+s)6}oL8 z1wTH3Y+l)3w53AlhsLhODLX`%4C-gNR7^#Lx#~=>1sq zK}sbyT%@&T+D4Hz_m-~?@)r#$DRP)QQYGw5j`Bg#gaM^8v9t&oe5DA!CFxgKrI`fj zw|LNrynctI&p={&9r33W1pG_OYdOwQ-39I(BhEosS0O zWKptWb=nR@kk0oJs{>SZlDxnHzrdH?R3yHAvC!`uM3(14zWWLhOE^&xI~K1dp~G)! zVt*%s1ZTJsOp8U9C^B{~itWsn37r)PgRA5_i@I8*PBb#22q{?U3yV`d2*uWs;azkI zcL^E|2#xY^=-H-hAcY{)%pz;YaEchoKQ84U8Llp2RK21yk-v*wcd)MVLa_^-%Bb>U z*Au+17DJC5bpx3pRTj6aV0??~vr#&dTq*7VMewLQ#hySG?+19J&o}BxacrQ{S)|6M z<_nQb`kmqu!V~0T!V+f#*;RB!@+#W7kqEi!_6#imWEX)= z#;By3EdG|HO7`v5f=^n_i6Zn-$~gL>4>}gU($^}tpp``ut71~4P(~#Lof#o?MO}#( z=mN7pbB-#1>_emBYDG{C^4aV_LsU%BQ;Yq zo5dKy$BgBJ&}R9R`-NDvnoA(nKBZyG1|n=Q#O)w5rPy*7%WxQ010*BKp#eCX!x%_b znrf!BL@1n+lmI|TH@tNG(drYGaKAVRi1VNRMPA^l1Cn6!u@y6G?m$GtO3~Q4i=?Hi z>Vhjo>Y;Z}rV2|sW_rZIlvIC_TPgjqSbgEtYJTW$5sG6seBdOEi#M5uaX|z0BN;tm zwK-HgQ_gF!dbIt)^Ui?dQ%bQW^fK$jsngEzN8``_NNOa`8a`N&9$6HUKoAJuS1=!o zEudRCC-%0n&VY0(YV^-APjv--w5AP7W$xIx0lFu90S4WZR&XjmN<9Ce&zAh!TL< zl!rNo0vz=dU94JtjKCIeMAl4Q!6MF6{E$ZY3|54nC>Bw|y30uq$;{>G-G8^8?e zO9aZa9R&SSsZo@6^z9;>=XR0JbJ(7zD$FC>!*nH!5RSAxLfKJm<~smLI~uh|jc3iI+Y;C&SM z{%hMlP?R)7;iUzqV=&c-GxPzqZ0a;ZdlE|mD&PdI=+rGj5!QsmgQTz>yB$kNbQ~MJ zL$d(Nh0>`w%Vs!GLrPm>Qp*rvmY4tuQSj31FW~gjPDRuHg#iLv&8XKY9QZ+7hrJ>P!{B}hqd^|dR06kF|LR#*`oyP1}2`1*SbDH98CNj z?B#bM6~*?5aM;Bv{`mv0!~virh9dV3I>S$CW^Y7X!ax#6MYyQsUhxKk^JP-aMM#oZ zz#Sskx)C#FGgSL!6SSa-HV{8UP(;{5d{!t9AU)tN;L)2P$oAOOeYYYsL#7@gNWiA^ z*+9xtp9jgO(XV9A9zuR}nd8WLjkClr zQOzu##`mvH5{EG3`%m3e5EorC?FgVomy{eKMP4%Z2+%+~K!_{l2PB59ZN+VU0V{)* z_zDE4fV*`87;In$j%*y-tRUw%9s;2zCJ^FFN4Ao(69>YDppbvO6P?-y=%R|eH0v%w z6dyY9-+svq!P0*m--;fccXRl$2?r`z0uQN{km5xoq^zAw>JxCDD>Z6UEuCbn;hZ49yfL~Pl_wu9Kxi0uzzdx6-9)Voaj2N`5G zLtKxZ(UI7?6Sr7mYe#G;#MXq^CK6j6Vw+EFMq(p(QCi6dOyta|%4U1)eGw ziW-#Ag@7EHo9E8Y7r_q58J$nnOLM2T?3tOLET)l+FQl55j0yRSJaNQDoXL(YR$A&cyYui-J1b(t}!bZAB=H!hHODo9B%pM*l!hHr00CHw! z<)o%~+;L)HibABY?mfbq6l7+5x+Hs=H5D@k*W|F~1e2CMi9J8_bvH7H2lPnD%Si<> z2ri>@@WDEnvQqLr$+;wVNgD-|J)Gd)vL`9}u@ar6^a$-*fjBeuCsn67^G%FTlN%-Vl3EaY;tZ+ zKHk{{Ba^c-v)%d0s9j;*!w^QQW-WV4wGr`Zz!}gx!r1|jh=Ak{C-F;!pP!nN<<3hk zXf-xDB{j8RB;h)M^f`~Ja+V@Qj?DB7aEpFv1WJJqlgw-qZIu7Z2fnJlr@3QO#)7C> z{^Qf)sF2YCFgmmg?8)eoqo5d0&CdCuwr5LZeF_q{KLF1F45Ru7w zIip3i{~|7{gb^COsxV?qNuDN?S}x_!C)YhGL}b;*I}wGNGE(XRRpkslnk@Gycb3#S zLU_VQ1M^a{^V4(kM&escCEGp5lkBN-6*26W6qh`3fU{p>RQ!OrM5Qbo)js+s!kGkVn?%6hh$IFCWIryTKa@ye#@TZyD6%6 zoO4LBD>|uP-{b`6^Re+xfy9%9GD78~r=w*fRnhN6B1$;56#L7fokYSj*gY&k%!3b? zDnK<*6~p;>F58nMev0uVx95`v!3nK$%bo=gOL^$Tk<>+pQ9g$%c}V!j6P1@UGNShY zCsjojl&?tGXW5G)Rkupe5jzoezBj2BHF#@mRZorZZxs5vu{p!rC1ycXjv^i2*!bSb zvGMVJlM<3+gdxeGpp*+KT@pUgA3^d-%FRz1nVaQ~7@n6Bi@sSxN@iYSVq`lC5}tUV zPn(S9w;gatV^`J7!FnlQyaB_9)sE*&u*x5BYk{qDN4#3@k!ZKk+43GKRn+Ur2gnW;V${;>esFPlhjQ z90q2-r<(9hMu&mwO-UW9b`;%6Q1nYsT~kKpqfZiz4g$u3nb{cpVz8Jy7QL|45u;P` z($KBOkO#DK6MV+_2W*&|`AZxLfrQL4@p%M>3yq$~E%sVs(#D|6@^>&ZFbo?bGM^89 z@w!jC)67{zA%MbSB1bsNW;O zC}Z4NzHS{LNd#*aCQ214hY^{cd?F&EvT}0rsBFS?VtedL$x0oVGXj|8sO+@&}Yg_Lw$ASflvps<1 z9+NA!3}gV}AM}bt-|F!$W)4UXMQVMi{IS`dlraQ}>W)m69BAJTodUnJ4^0a3Vl`ebL-1Ov$y>8;fY2jYrd4QIbW&cx)z zm={FRC<5|L68<%WFI|7K6b98&*P~W8s$9`OB%F;5JJT>(1FOX1$wa(#4~vQ!5-B7n z42X|#5+OqHBlR~W&n*tE@(J`TL>49fFyj4h`PI*NHF&#Lct1aiV5q@)s23u;B!bbP zniJ+ulTFKKT2FozvSqosHiw+Ke2_8^7~9UABX-m9O?Ipv_VG>6*w|44`Q7R zHXtrZ{cDn$?P=;JuHZw|q~yqcuH?u812AwAyE!%dL6@okzR6vnLI%r{j0gF}$wwlr z#0FiQMn*E2`6EJ1!W&^@$ykz7}g1zJh-8U&8WK~npJ9H0waJ#~^wrTXg;B~F+C z%Nk-G^WVMmQqnRp%jaW3spChwMVKY3n(jd(;@N8EG8X@${s0?YyPdH6_Qhh!c@QD*qL|hUU zZ1RjpRX?gm^^X-N+wuqIND~O8zWXFWb)TxHqpvoT3<8T};#D1xOl0{<0n~iy41}}T zf?~coD>GFrg__aw#i_JvFn@`M_EL)H%P*;agGKE~BnEYoRtVJi8-+=~_<_E;2@ib*i+C1nKac-pq?iH5!al@6TiX;<|Hy0~)0u{CfJ+_|0%aDz0vDb1RZaigCr zh#(?OlruIqelXfs7g2-6M)vDH5VIOCgd5<_C1ZfJK_n?305RGB7*i@(vA#+}2*38K zMy90pzM4;@jxB+U>Q2Vgq60wnc4wno>T#2)nvp44g#W|@2!DzUjGkxaa8ag;V~!@G zM;ggHbQVx*pdz(x+LY=~`eKl>v1HaRU+S7kQ+SdH7?u2*^!Z|&q2eGSGdr1NIWxQ3 zN7T=V@d;2V7#UU&gcuksv+=))9g8?bL+n+CxIqUi8oX*fB#Z)vEWs*-nF=!lW)=*I zfV<@=1q?ZXq7Y^(%nX=WFqDkM{Pz#b@p45#U|^6^rPgS5I=#VYG?~n1i^XcQ*@Htu z>(mXaSHD5SMvWRj*Q9B)<}F&Hr`o1%yY?MAcIw6`<*%S<}YNi z0G6lZ$X@{N!3aVgRg{|2P+Cey=_vzcq)e2VvQSoBC2FUFsSqlZszcSK!l-&weX0S~ zkZMFVrk67@3m3N;MpN~cp9)T>k$g$^f`M|r5x)a%q6p#Bu< zO{xf#pH00>&80q|7Em8ipHQDuUr|e_Z>g2kYU)R7164|GqjpkzsQuI->L_)RI!paQ zU7@a1cd3U|CB@JRT1D$=3mrm3<^G?a6y^sND#vPX zulJtc_4-r4wbJXidLQ_$k88MAfx^2w+T-dZYC@=dS{3mTEIx34s5Kz{JL}PEkF!s1 z0(&v?l}9%pJ@utt4efL_4%ePm+pBZ&usUotSmeV0K^DCJ%~PFCKS^tcs!psLR;>`A zgYUu0xvJ;y6RYyA{a*LjAMwg#+^Zrzk00L#ZqipZl2@y(kDpc(q8iD{YHQ6@s-S|% zHLNv5`0dsHey9I47OeEGdLC7h72V?Vpz@)gz|}S2UbXc}Wi^9V`U~+vb+Ld?tAKeQ z`)zlttsrDo!rsUJ#Gce}t@ii&Q}8~lVtNv}MhHIyf3fRjDe{IYM zxgV@@Ojt6iRaElw$k_==1ELoU@6t7J>9Gwu)dzWY-DfSfm;%2YYfac<@7cnU^mgyS z#!C;qUEjW>RcFJDMfHB|-OH%R%iE_6IM=^P&?`R-4AnM#bItQb!`!caF(-O`+T?{f zVSN)K(!WaW)3eEy!loSqzPnjsSB&V>-2QINmu)QzosBaWweL_jzc3?S8GO_`SSKGW z^lp*YUbD{9x~V$*hczbM=7^TI^lcj~dh?JW@4erwRm-h=ny0KONNU_*RgdR7?ig%0 zH7{S#d+PfoCxy3b)4tT*;N!zN&$r6yKBw+C$1j-lIk~UJC9U!{9+TIk8NK!H z{y^KvAn*ImZE4dcT>8N^EPb+l zJKfj&H(6{0X4Y-EH2BNLE&gx~?z(tDzP;P3Ufo{!zT1~WW9Bz$V)D%1U;nw~tu@*; z^-s5Lxu%t_-Wqtb?xbtv42#JRDYO*sX~G2Lx8J1aPY-Sskl!uNVQQVx zxy7-7P8}zobG#6>r%6+bJ-kzR?pm&C<1Y`@sc)b5fhRER&F2gqPulaaGQVzs^NLJE zkBaFVrfk2-yQq2lA$1$L(vv!`OX^~>y)mrWkc^~)KpK?zgKaxLGJh)%W_b(rX|JCz!My2<{aWT{e9F>0lke7VCI^q12-}igHu+qaG zc(0xlt*fV9t2}wdJ0Gt7-rRM6`}bm4`p1Xf+azRR;oA4_d#|1mt#R2$yjL%ZR@(j8 zds7Oqr1<8Os}kHso~^epK++%xjWdz&N&)sRdgQ$(#wtu7e#v`qsRZGJC*B)UfR)p4 zd#{`oT@xl9^lm;Q1)wEgeB7(H`rQf(w>S9nbm{s}7rnEf=aiP)PkyuF#KI>hX`%JI z`{sUi@>B2WLVE5^@5wVFI%`X=JUw;7TLxhLQ&->b z=XUQd1hBmL*{vn(?_)7$A-&_C_llI{$nS1?FX4(w1ZXjN=hHo#L@Pb@`s3sKyyM8e7tz_- z{y$c04u!_%Wg%-!qZ$m>g@S^vs6nJiRxzXo* z@e2#@Z}MAj6#A|7n`rr@Bo6gN%O+Vn5A_F-9R9=aF6*I+bsJACy0P3lq45vpi`QOQ z=3QUdqt(pg^S-;W#CxQW&b|1kY~%fp0sPC67oHqE>|F+M&&7RO{>}Gyzk@5?;l#b| zWe-olI=;`w+iOZ6orKled-C!5OK$%_0{n3H;qe<{vCMt{+>;}Fyo8xUvXf%nKESPBcjUViUM#U4Z|ENtyL z>^=CKXr;$qefrz)qP1k;p(i_ci50S0!lE0W{wOg_HBs+WTd!4HiNFwtX?T;dA`e5x zdz{ZszW<%Uwxhp3G^^lb3?HCW1PFrf#@BY6{pU7VCoPth`l<+S3kRUEZa*iIz=HG%)E znYI7M^{f5Ig1R;T&_%BGh=pC_2gA}@f4!*Mf6Oxv`^-}dI6i8C7Ol0RQvtQ1_oAKw z&pZR3{r@}sXX){5exA**#Ff>*&(h}~c(p0`EPbA(=l?3bo`v^c#eX*Zv*}k(Ztm`F zy5Fn4_%IIXeZJTH56Sc6M&q*HXJ0p7>$U4v%xgG5XcMaVzj+FKsm|=`1y9GA`9_C4 zw~^!frR^Q~bg0hsf!jdGz~MvT?sm|>Wx+4sF){FU_!l}R{xTWv(;WQu>5lGkGaV;O zW;vFuddtC;zU^SvzKghX9Q3R2I|7@0;5c^ZL&sdt0!J@yp`&cZM~J`3@$HCD0OM1K zxxwdv^M&KcsxJZSD+gPDG2kt6=w4e2nBO?=efBNjE_1jxEC=irjK z%_iVb>KGon8F*}VD8_C9E?XVzc5MYd+Z;iL?Z9cfWBh)L z1^Vm)j=OO`-7moN7sqdE9$nQy%+ezg4q{G=0%&u=u_W{l(B}`w{?b1{ql=C;sTV<~i;isO5@>bF!F+NF^t$Aj*1a4wD|axz zmxFGX9WzE=2JJ388ZcKtzblT@?_U88uQ+xzsQ?`-9GBNtfR?xI}oI^ur5i?X@vP`15?^10_&@##I3(LF~m!+n&~eaFv}@1v~l zJKEj6kMerp_~hjWD69y%T_dWiDFciijUQG?#`u z1DlL-_UN?GiTdHxbid#%KEp-?cD6=v#ugFIEJs9-PDv4mGhdBB{g3GVaAt(O&ifIE zM|=`deCC^ocCW8R*sT$xP5Ti3M8r#N%Ms^J#EuloRd)gJ`s%FGRnfuVDx70;QB;^K zXmn#&?}sg1ue{mbC9l)fb#tS`b$CQ?S3$jguHrKTU8lZ&(bewtVXnl1nXbUjxvs|b zN4rLwCb%+YOm@iv-*ky4ie0GHogmlBQvpHr^2 zf1U+Sf4COUxeUDibmd3h1a5a-hrADf-xH(-wd6pV&?%Y~Y(03v++HCxZ5AlR*H;SD zg4IHqNh=t1dcmzS3O@y!1w(*U$WYjY9~B{jEU=Ccp$rp7Y3d6L3=M^4*2coJI!%NR z8Z{F#Tec9wI<*qk_i7__>eEhmC#i$5Bc+pYJiCjqeSBA8Msatc?t-2|(Nc%7^`{77 z@2`UJ)!8Va@7-u&Z9re)dYw3-qC>p!ZQuSvyVOKs?6@SMaL!;MYT5I`&K)lb@(V)+ zih4y@88S?;cTE$z3`rM)MrR0bzyGSRy6B6Lx$uN4URku8{NF`$DU0^Mp={ z4~41q=YyULgu8?PC7AOU3U9pik$AW$PA|d|VC&G@(PeI?$g=t;B5XzFi6k_wg z5)AKrEd(!LEV%b95pGm01--u&%9<_{3^B`vk1|#W88cQ2uYLWU@Z*kELa)o;gZ@7V zZ1XijMC@AO=aD}Oqh_xYUR}9fSa9$sL4I!o%44JOPPa|MvX@H*e)4AFgD9u{WwJtBnXA4U0LNB9;TSyORBP#RAOTf3hYmb=dgd*3=M)LVNF<#}F6 z4*Emr+wr21k$g#5TU0J|`~I?U{nQoVw}7iC-#>*8uUr$pExs-cS#v{ZcmAf(Q*&Dw z+wG3<$MCx-?|VXQ>3t#U+5;gs_>r(P`mxY|)DuDe`BUM~{gpy>Pw>BIBhrJ6w}_UE z=+_)DU@B;bC}@Wu9bl%y%zz>KwoNcwVRpd$0z)1a#sMS1RKcl=Pdzgps|(##%|EZa z_FwJM%dDBTM=#_0)f~GJyMlV)t!)%=tNvT8uvXME7)ULyVakn*6*Y|!1Fo7zjuBYR zzuKY8jb~cXR88|tYKksp6jjqeUP31CfZTl_2J7BFp8n~wh&O!eg0&9f_Sfe|uO5Mi zKg;cLh4k<6+~~FCZj+a0Z~mj#D>0p)v#2<~9?jjaYcso6A)}Z8U2yYm@#%wlwhA)_ z@~k|_RIhcf!I>{ab!Zf#S1UD!(8e8mznGmmAfio!I##o-Zo{^&#I*dZmt!66S~RKO zv}Jo|T=K|KuMK}GLFnG4Q+SWa{zEhJMtgEzO&Kzrj-TCDEvL3 z@6gxia{4@dl0Hfwr1#Lf=&kf7dOiIE{T;oO{+j-b{+OOmzfZqM&!%V6Z_4?=rFo29ZXwk6Ev4v zT1f}eyl>q7n0f%s<}K<5^(VBP<UZiOwGW!m-Oz__N6p!U%kqAr z)>CVsDP2Xapq5ih@%J_L1@#%Vi29iN7d0PR)%U46(67Ety+svMGpXs+H0WIm@%IKb zjv5PHYykyTJ(UCP>DGKzsWV^&<5=w7G+*MCf%Bs5sQ(K2!|Vn~J1d z(EK_ue(ynbgEqJ`^uisWA#Mw8aVzMJn?r-#1iIvg&??uX!k}dig}&Ja&9fOgXals- zTIi)!kP?9yw96?TwT~eaCa}}+;Y8o|aFa{}ysOPYK={w*J^26kO(LC0{a-eO6o2>l zxMT(Ws%(_(IQY6y)}5Kge9t^(;@J1uZLFHpvpv`s**Dqm*puvIwlNpZrE!zFZ@Hr! z%h%`Qc#6|-jkpe6KW-?O51(b+2JRqtj(frd@%8vNypvDh)A<5^HvbX-J->y&&R6nA zc>{S5d8~Yx{5APTejEQQ{~Ldr|AW8A-{BQFgH z8pJ5oN~1DV*+AJ{8KLZ}?5})DIZQc1`I>T?vRFAsIbZpOa;frrsphE`s#dDjs5Ys#tM;o7tInt{ zs;D47NE2iV3JYo+)HA*gYIHE3a`{CP0AL^cFJx_r!rPKK>4CFMOmO6r<|&sshq1^p!{69M7c$|Q+Ysn zM0s9$S$RwOK&e#eRl%xysurqts%|Q$>PO{9;ycsz#|Ms-~$vRDG=aTD45|qiUmShw4|=AF2w~9n~Whrw&pZ)pm6& zbq941wM*SkJy1PVovI$Mo~$lbzoY(_`cw5%^-A?N^=|cV>SO9Z)D`MG>PPC9>h|jH z>Iik5I#KabGmlAE;^^Kx9&wwV7Iv z_H|IENV`b;rFOY?wRRIIvlo=Pti7&%psmyf=ro{A9bIQ#4_%ZlRySBTRF|&H(iQ67 z)Xmn-)h*I}3CgV2m20nQ?`xlG6*{%fq6^ivMGOaG^hba+BD`Zx4b^t1Hu>X+(Q z>euNv>38e*>yPQr=8W@@yKGA=rU!ng&U#c(D@6-RTzoNgPf2jBB z0}Wb(%~03S#n98x+Yo0MVtCmw+%VEG$uQmUw&8ulCx)*KD-1sv_81NtP8iM^{xsY+ zJTb_OW@Cu4k+He4ld-!o(%9FSW_;C{Zyal!YMg0&&-kJ7TjMI@PsYv0J;sB^6UKAK zCpwuvNUzg}=)Yxh^?mgN^)Kk%`Vo4M{&oF(`VaM=>c7^n(*LO6tlyzOp+Bdu z(BITQ(aQ`$2A!dap_QStp@$*b(9bZ~Fx2pxVYH#p@TTD%!#u+x!|tDOSZ~;B*kw3mIBvLLxMHX@utt^9V60^eWu?{XHAz(H%#|TO--#$T}(Yq zF{XIa5Yx-1Jj9rU81Ev+Cy24hwB5AVbjWnZbkTI(bk`JM)|jp4I_9S4*5)qep5`R; zi{>=*tL6gpIP+BVO!G(P&&}VOSDAk{Z#C~RA2eSz-!eZo(-x&gZwa>4vvjm{vj~C zzP2p0Y_{yM?6(}YoU@c$Zd&eJ)K;T4)Y`z>%G$x&!|JjQwhpzXTeGaAt#4T0w9c}A zVO?td-n!1Z&AQwAoAsFWn)QzLsg<#*ZAM$Dt%2>I`u|V;|EK={zgz#;7&jQV8-Fn# zHl8$IG+xD`V&0@NnM`4(#*mC1P5n#*O+!torfieP^oD7QX`X4J=}Xf$rZuJwkc_{W z&YLcqZkZmK7;}JG56RfV+|Jz1>@>%k2S75Wm|r&+nv2Y{&GXHR%!|#-&0EYn%?Hd! z%;(LQAsHW-bIqg76V21iZ=2sYe{BB3{G)lJd58H|^HK9@NXBbsxkY6$TS6?)Sz1~; zS-M*iEQ2h`7PlqWG76G$n&n@XPc2I=D=j}kGVX?C{KHaVxnp@`;jBTBjCN~#Yq&MS z8f{IqK5rdn&9IKQPPP_X-?9G7`Y9yiO6vv770YeQLknvSv>L27YfHrFju>%>@e*Q; zvre+kw7zX!VEx3p#Ja+|)w;`i(0bH*!Ft7d+xpO|wPAk5*2vbz*2&h(7HNClmTb$g zW!uKuCfa7$-m-mV`_}e@?I&BAZIA7D+X>qZ+dZ4t#@V%Yv%Rjpk$s`r~L2zO4o58b#=LRnh zULL$Q_~+oA!Fz*`1fL3iV6C*uZ7Q49R>$_7t)upQ04YH-!hTC#&qinNnb8R2l zKDRBmt+xGa+iE*vJ7v3M`_uNoR%w&lRrZGVX7={>aJyjdV^6d{Zy#yTw~x0^wwKu7 zv;WKfseQe@)V|BU&wku~)_%o)!_Ec=1{;EH!3~3(1-B0l4_;|sW8Y-oZr^V|Y(Hba zXn%yI>;b`=V0&;_aMR${!O_9}f(Hi=4bBM84jvu+M({hq^MV%ze;K?ocunx8;O)UD zgU<(F4ZaopG?)odhUh~YhqMUk7}6~yDkL@}DdfcvPsr;bQ$mVD=7h`-`7C5{$cB(D zA-{wi2ss&YKICf1t&m0`%|kkbbPb6N=^HXID??HbxYba3b^q3NNog^ms_41F_ne(0jm#i7eX*M)8h z-5I(!v^?}$=>5>Ap^7@{I+i-2b=ubHT*px-s!snpkEsFNTk=MVzs(g(*jxq zyhnd6JI`I`l!`<09rD-ZQ{~(E6gq|7!wi=z6_5Gp{8jD*M(#3ZAk&f`BYTaz!`GF+ zEpNweW-IA??0W7wE}rqSl)ROq3me0g)6KZ|nMS;k%V*5;Bm4>e6t|c@!-UAMaP8$Y z0v0nB{8V`+JAyvLUS_|OzpLmUP>=tS`B?7c56UjH$^2Gk3v+?{gb$N{ESt%Vld0K8 z{HIJ2KMivY^Z3c!pRz5qTju1x?Q)ZZKFtdTt@dkyB|C;Z@ z=oPzIC$ou}!L?_evWfgju0MZQ_7Phq+sa&EbC^%KhVlzs8sC*aB^xSxB0D8p$sgpu zW`pH1T#|f9z%XVK<`)O?R>eH-6?p_#qPW0MV-lGixS{N_;tg&$@-bae93W#%>{_N1 z+mri>{TKHfYvImg9;YXJSoSXKVfwST*|7*4&aGi)vWc>NTo$)cR>=?I0u(>-X4x_3 zA-hGsQ@Mwu*wI{Tei*YJIIfYclmE87g zoSS21M`aH7InK=wQ>F2b*~gewn!qe)UQql-f6X6Mm=x#vTbOwoDx=wh>~Q8?_7Z=H zJHaKeSJ?BiuFM*CB0H7q$Jn?p1Me~Q_*SxT@YN_zt1|MNSvCI)o6USnuVI|5RgNY_ zW8`--VSGb*K2ypZ;c4b4PA{*gXcpj>>A42XMCK)KlFY(=!@tje&fB>Fb`5=-y~j4^ zw=j#@^?WJ6jNK_Ol^v3C>?HOBHl7WY*X1kN#^BQznflBh>@UoB>_l!7e}kLJPe7Sp zWJfb0Y;WGdMRF<31n@x^X3ti$-DL{U=^^J}-{<6T%l~YEP{10F?=i=%ewf-Oh2|i(lE(SaG$d#W(j+cn<&qeb>xQ0IZ1OqaT?}% zW}_@cQOvbsynG!lhW|+M2UE^WVy(;`b|$Nr&*YXd2ftuSx5(aOWbAnEBX$v+$jsr!1{gred}ak_X1cOH*`rK1_80DVb_V;Hc5;UlyD=Nt zL0uv{%U@S~!8DaEW`9QQ3BsR~31R{j*V#(hW440Rup1aX&trBpfGd^VriXDyxJ<6A zysO;EeiBf@?UOZ?eaakQLKQ3IJGqtIL)jPdt^q&DUSW!uwfviW50OBHTQ%Wzz^UPF{>=&5@fge5_vA4 z8n8-s3Z)Rrm9fX!iA*@Qov8xy!OMgv@~ptd_Bp`9|^u%o;kMje{hepq?yW&1%_V`9tm?^A&TK zjfZsMQHQ)-H%7^_vSFx0gIHe9%a^h96mouttQCC(@h8jX$>uQ`%sglk$#bLEII>VH zBF-V|(F_&|gs-{QfD(5B#w@<{R>w&}WqyeX=oLwwcz z!D>$)n-qP|UzWU*gAB+5eF7~2h6EsMX9;357$Xc>1dE#?MBOZpHw#1jsuUJDtWi9s zvF0g_OKu*B8>YR`OWGiRP0HWvQ+tWa(Ux8JxnGplt=;bJ0609q`t*|zrFY>)>Ai?` zh~Ar?NZ*b?$I4I4%?|#0pttB=<40$*g{trqfFBM&5lJ^IS|sZ>NkJOoJu3p2K*5mb zdB>h#$aB?~ZlUx(ljB=QSK(VnchtAO?qJn>qh+XPf28HljS`&lUP3dVMLkjmdzt8BmpAGTK|KdZ{>HY%#U%Bbir>???5v=@0neNj!E?K$cqRRNv!9dXaCjFv-Zt%v@)4&4wM?Y4Ahx(D>!eW3FmM88B2gC;zW z9!F22i|BXg59vkFo3Eg8#5sgTArTl5DuqO_{LMqWtJZxuU>9Jj)_)YjJ{4vL%ztP7 zNF7kwfR*pTptug@V8E{usRhBVfDT%Gh#(^Z%_of|N9ngQ%EyQj48zW89i*dCgu;p% zY?ed<2o^>Gql9t52r$twu`q=&Q(?qo5&=>?DX~TZ&#wRd%lAL~oBr9~^w0jL|7Z6% zVT0j+e*QV%;Ggpiy#JhUAXSoo&Nukye1m_^H~8m#ga6a#8|-jab?IyN^T}CV#JzQu zC*FUz|F(v=IHy8}BIKzWj*#IAv6HzOG8a=9hDgz*xC0A2*}B7heGya?b$051ZN z``vJzAq)c}hta^)h3N$|5e5PN!z0HmDW0lrhtF
Haae{WMkbu2ND$OcwDOZolS zXFu)xo{cwgTkdn;i#PGR4l@yEIt&Rj4~B&M3WkJT1G5pP42Hxx3`62wf+2D5!;tt> zUC9FeHuLFeIIWFeEM9i72Lb9&eIn z1q?~|HVjGoF$_t65)8p%8Vtds2!`N7?w=<3yaPjUnhQhl`VfZTwh)Hk_X!Na@e3G& z=VBOwE4e6(;JXrr;Jg}!;Qb>E!F>Y^!M_xS+8r1q(m^=7VDJ6o~51F2%5Eo^`j94VVe!&cOwY0yX|+ZEX@XCv-A?g`t>=ld(P?HsqUKey#M(= z9^Z#cSJkWTd7g8B)vfB9PSv~b{p*8|KK}QAKKt(%Uw-|~x8MK%|LgH@derm@_Ug82 zpl9tSq2Ap$+jHcAf4_ggHiuHvP%7wpWPsEF`p~Tgx^Kh@Ys@7tPpU<>eJH_>CK%}3 zyCzT{2nEt~a~Bg7KJ{mXXvy2y>O(!1|XXF{>9=zhmG zCY0L7n8dbZLocPv3^u{!?o_fNCYaij9PLAT9}~#zL(dN0-_#cNr@Ph%n_%K#vOR*P zJG#-6{-p`zerZDaUs2vsCQvwvVjXP)(eWl!7*BV{r<$7dG!raNGl6h3?Q0?b^G$8~ zQu28P#ksE8d z{p9N}l)uD;l1nJw116Mxzyy;Inm}Z!3FenlogStpe3aIYnqcfP;+`}$$(%8f=V>1u z5V03cAWv`h%e`ZQh4-m`A5$zE-0^kf>uXa>133`;fyzpAS|k*xNrnP}Y)v2->lO%v zdjx7DJp(o2UV++NuRtigX~3kn2n2F<0TY`YsEM8x2*l0~1dC?}0`YSwZ!zU94utae z1WfYYKy54=sL5ml!TkM!K;|!jV0sC4@dJTi_`yJJ;z8>2rGY@=;Xo*n3)E(o2Lk!! zRwd*a8AU}}wZoxoi_n?XG8LZ9i9W=!Q$nL;k$o!ma zjtkc0jtiRb@xf5~#9%OfGBJr@O}d`AX~9rrdN2@f4VqkAFc3W>Xd<(Mf#mF9FgKh0 zof8bieoG_y_rYNH_oUAY1`_85O>}NB5T8r77f}8Mb9WC z-W?1S?+%)DE*OeGMRA@En#4bYwb_5tzBR!>ZVko#I2ek25;Xa5gTcsmtE3N7olMG z5aMGYlNlKbU%8nQ%tKg#wA=_#nmKX^;YEjW>Z= z;Xt@g_a1o5FXjNu3q1z$v(~74In`ie)9?ks8aUXbTg@i4n$vxLw@Yg;tGPV1F@K8& zv%hXSM{LC35b{2eKB*zh{hYRK@^Z2p_PFnx7W)HbzkOJzTW-gG32kS@es4efnp(=4 z6N3NMjy=woHu;oiW9_kCMe=`(LX z=9Xi^M=Im+7rhPr32qsEB0pztE4|1pngOk<8)R z&ZaVsj~~QYO!kp+Y(L$1JeBvyYT_ovnY&)Xl#kyHaq7tTatfy#u67D z&v7PofumE3nKXg96i2ISoIOTdM!3^_Ij&co*?6zShcB& z_ObKpM6Ty?U1*=jD8SNVm^-2i+&bd&$1*pEOIe{^ds5CEnI(Ci96~V$9mm}8D(5@2 zV*_!qlbG{uM>!v$9j|iizw1K1R*-FvlR3`izV#{}pEWdI62f(*{SPK?UV`II?Ls-* ziObb9XTLC@tW}JY#l)>Vg}L*(P`}m0MJF@2whQGPK&ON?4a^Bf%3r1+cUS8v(x=Lh2o$MZb#lcqMYX(R3K=dUzBOyznG6nAC)DEkqAEPa-XeQ)3P z?06mqhxsAX#BqGjJD&CghxuXoY0UlCH(tl%VPo~3)y)3%bmmuIv=8b#N$k~cXZGii z{b;e@m9}m2_K)m_|HbrCd;03jsT2EEWHC(q?^1<*A8IqT$2}RFy#B4`>)3>rpS|pdf6Rvq#2(rvZ~0|6#tY_JwZB95m-UzZ zn$q#QbSNE5;Tc?yT3lWudE-MOQPI7p$6c zHV_xPhPh9=z~T5=FWhOUK2llz%E#Ml#6@r8c=s?>fh)gW>O*5}k#Lv#j<@oDI1ILn zINpvF+orN|cH}Tl&mnHTaCjG+O=TR2Q+#k{;dI-ZXZ2iFtHJGp%L-KtIA zIICK=L{4Sp>qGlHUhmH(+j&oLJp3)erZR3*+TC%!e2lp0lg!;DSa~@&jKj5LpAq}+ zzU3=FE(g*$oR#A^Io~+t+=;}Qr@GEvMclmq1Gj>>@Y7w7hpBzR|A9N0xX3dc@5nB+ zXFGAjmN9pMZ+rHloDJuH9AArxOAAMTdf?<8C$by%tH?gp1^Yg9PDysb{$R3Cbiuxv z?Bim;t(3EDyvqKK%}ayC&mccPwq53I^uBIb{M_Z+f7FOhKVTl3NS}Gna{pn@v&q{J zHRb22`DB<8?hwJs>hHPEKtC>{&m!TT^y6ed%D0X_!=B^vwffmth=c2dlyEs;4h_ZE z;V05&_<4?Vrk}m+M?L0~eM0Q3xzC9CE!_os%x^idpHfA624H?#&gG{+m2oQTM{+9l z9ZU8pvA@;NUiPEDxK1!Hu>U1~_A*XkkL!eV7wlJ&edI;<|9e0GvLF8Y&`?f_{R4jX zPI)lDnU~oAS$_7iAO4%kJ}&lWRAGNT*=NMQn)0t8`=Zz%RE7WVQ2rHM{y$Y=KLqoi z*l%on;y62z>@#BDfMJ4EHhwyO&jEK8aV!7I_QeyBV>N%Hnmr{y{u^ zWtt`2r537=JD9knM!b&h>g74`$^yL*qw0dm_x=7Ve$f7hIri;U z_-`lsNm3r)zq^W`I$8UD|BSBWdePA4!n_u7DE_S9LP@1tXhTU2CjPrv%qpx_(6k0Rb&;xb<__p>VN1rFDFi~h&luYKbo zW5f3$aO;T6f6v@ebPlkotbWMY@O>NYIE4CiO_1NTH;jDPF;=mgYU87?#$u0DK>dI*^M~M$UfPF?MKM|^8W4E?sa14cl@Y7y&Y8MPk5Af zEPdhfbk^LLXKWS{AR{dZ)a7W;#%C=bTH`v04sz3mVAen<8(>8}T? zu%A!%d9g3}*~@;k=VN4_>dE8%S5?@rMft@(vk`k7PXp*!4fkUIJ*cg0@{TvpaSINA zS6w6ATEWW3QHA+$K5?1e9PiJ*T*vvy9{0rc@59_Sv~5#aIqh-Z;eI2&-$XZKuE}@) z>-c>D?LL&w9kc3~yHLWF)lc@rzJcsliv7lZH-`G)`_1Sr+5dagXEv49r(?Om+3z>~ znQKKhQW;l%pAlU+dKc#I(TQs#TpfG&{oU1~J=x#xou4;LzaK>TC({KsE8S4S}lzhQ2O?{QepjU{enJ#%|?ftyQQzJWRVsVt|maa$e_^X8gU znLD-%+&bdI)0kV@1rBYoU?!7K>hY=TU?K*c3am$6nzX!3YiuPPWT)K_pz1anBEpfxznXC4EhIxM= z&8tP>s=2>Ak?dnLInMch<&*vJKbPz?Vt=QfJ)fU_@8iSI0Q&SegX8M-Qg+@D|F9oR zpEVM9WA=XM35}Z-Kf}boUtF9Y5H~0GEA@iBtl!JeZ*z&8dM?*5)<*(W!97N%$xE5* zO1yQ%^}n`j@z5SaXx@$7#@xu4)_C&$Ur zwoPSmHrNlO&79aj=VvebQJ#rppSX+t`(B^hcwC;jWS{DS{SvazbisZ#$}jd)t0+It z=jLuMe;;CPvgLLE9SAb!gwSt?k$pkzN3wN=ezWJ}()WCD=McAEIRESZ^6|BVxa49k z-`dXOm9B5lFZdob=pN>Le@83+P(FMQnshJQf36c=Sv!!C=l%-52SpxW&c0w5KFhfB z_Q3a`Ne?mi91ahpjc|7S6IXnUxt*9Q=VU+Xwa&5swV%D`J{q_obUy6=ILDdU1rFbX z62e_jC08eQe)nfG;!nG!teu44n4hWQ=PAE($$r#-EPZ-B!S#Q~&)(B+=pUSivckRW zcRYzd*e{_^BFAy6xsSS<>@!cZ{draRuY=7pw)g$_8)Sln@*GC?8L{{MeXq4<`*yO= zKg<5Bv0sStJkRzaY$JKcJ@2*Ud5vreVtnI> z9;^L-CxLde=i?RZr`bBG{4UzS6?^|6O!L9E`7=*gp?< zNM-fwcs+$UYw0uT4X)3zV35ieR5Sro1-zrR~Y+@iG{&-dSd z$#p*B45Yd&75mS9$8E=U1$QEGsn0kL<`SFA>V*sMj(@kfinw7#=5WupGFKkY-mm>H zbARZ{{VJ+cj~|(Pu*NT5$LobUG4nf*%nJQr9|<(tul&MeoMGH7s$u&TvcIhVWxros zv^U0Uw3hw&x0^lAOV=+O^Ox$z{(j?E5B^;T}L#a+{{txkR-!0mQ%Q>B5+f;TubR1_G9}9__D%?qe z`Hc^>2hL*)#J+*HZ7Pe?u^kbo54CxI6D}Xx)Fv+{yJ3GY*(Wz;d*6R|CiW;-GyIGF zC9=P)9u?-tg~ScojN=?c+ctU2<>64iRb(6O%iO(w?I7-K{ptEOyE)tY{<}i4M|}<^ z`}`Jce^Zs^suSKjZ@?dp-^f<%Z>Fz5dmilYeP<$ZQ~NXbonJjY?Spvp=@Z|EIsfCW ze4fSF=&>Dh+xnKXd>rF=D{jx+6|`-Ww;yFU%7^1_8c5#u@cjD#vF@c>SVM1&8m& z$$gnSlg6%1Wn9O8Lp*#hUb;VX-&9%7I&tqe&Zqu@{T(KD<@L7xTK2qxlyIZE&_5XG z3l8CUt9;|3K|21P0pmP&D0BY*ZmRru;TY$OhBLRhZ#nsT7V{3q`GOJE+n-4G^G340 z|M%q${^yhZO0oZ~UwNn;Na*j!$Y#*t?0<>fON+8`QruL1EMEa!S%zY!pD66;Zhy7go#E)kCg;m(2E%RcJ zx!xvkJ!Loiucl9~3-)zr|1Q`cM)n!8|J1LYobt4jO=1Gqcd_j6tbG=eeL?K^+lc*8 z%Evrf6#JX~%HuhYp`9>~PCbUpHF_g)V2|sTd1Bv}wr%q12b2rfEwhee|3xt`tGB0I z;Beg%oy6RaRdOgFu3Od%H_eZe{kHxzbqzb7dgKevRD6o#ZPDUi^(P?{zv%PZ{+V$=m*qmwD>ub+SVp-e|!25^_xha z^a+NjV<^`EvYmGl zbN32XRxaoJ{#df_@f)^(#Mi##e2ntVB`z)8GT-ubyq-k)?D;0a@wWAgC;Jg+E&1** z_FaiHkorDb&v7>P`!d9tNcI`A?@FBc#0{HVeVoV0evsIACC)nHat$13%PQJ!Ak7n5 zvG*T89s39Ea3bcHDIBLO+*QQoPVG9kg1FI5UFT|Q==^#ba}VM22dM@F(f#{UdHwM3 z<|ZYXn@Za@m2u_wsoKdl-OgMM^+jc_xZ-@~UYBs??Oq-a zzsXu~DRWy_+3t1X-+Nw1IdJ})dIkHtwF~2BB5{QU%-t{k%gav(tMk1H{W70EQ?F%i zxF09`VgDF?=5@h-E!i&;`yIqjS-E7ttv?-O3&j2$-{Y;kA10D*;X1BI#JAnbIegz* zelv4Bpm~t07-!3f%PwS&o{q_>jO%#Zpnl(x?Y!HVJGcuR{vMUSowkFh^7`Yw_WSNw+E)9o zWq+By=lT%sK9@d4iR1tG?vBR?IE?rHPjdNY_aTAgEuSae#@c=KOYHBcF7*FI3Y%EL z+}l--Q?&1V`t-<4JleLYto)c@{r`@Mc0fOc#SgvHnNyjcj^hvUQSRldIsUJ>P!p*dB=2 zK(>?q%UrU`cy(Nxvf~)-i+-84j{V`P$0l#RWjE}{(q~c^?9Upw&+wW@jR_;&s zqr7A3GwBDmUr>cT+HbkoKUIajZNDGc|NJWK(SFOt{$Ewtqy6ULN&b|YH)4nD_B0DaWoCBFV}KyA1$JcQIl`plDZ_?};6 zd~Ga#Qv7t~@9Ky@td`pW_vURXYrl@;73D_X=eje8y4&RCWH;;|qfb`sG3(gmV~_S+ zOP{pZf9%_@<>eYkwxfGiUoKpi4HNrn$~Bkl`-}ZkT`1RMWSi|(eYw_>eMamzRxZDB zfp$mVOcg)-)3#0Cc6a8xv1Bky>j^W{3uXLVxd{obhKups_6 zHqRkG#-ZBZQe}K_xIUY-Ik(R#UEt78Y2nW60*7{5Bis^S4qx~>-Ved`S#k?5r~kO= zTKg8o-*~@r$bR$(+BZ_i@i%5)C!Alu4ii8A?akNk=pV$LCHB{g-}3R;@w^KT{aO&t z|9Ac!+ZpvlzmDFL>p6|KZ7Ms?xO}i*OP_gSe<)jbI{yuzeq12-gZ=DfKm3n%?Bjm+ z&h_LuWWQAWf8=Xle*7-M_}Yr=UG4LcZT*Rx*N?g5eB*8C&jCRypV<4)FCF^@{fYbG z;r<-wLf<&$;{f-=rwVs8mDQ%Q{_GgfZ~USh1L!krYc9wAdedp6>v~ZK)1IZhY_wwJ*X?vE~zurSKy!M{ob!@D@J$B)8r>p!PDp5^g3FafZ zPx=b4V=wYr^UKy}bAB&b*U5T&Sr3x+zOp`8)}v${m-Vk@-5~23vYsXD^JG0=)>q3q zBkQ|ly+qbe$a=Y~Uy=1HS$`;NZ+#9tm+NzotYfksCF}5eLcGN5g6P-^)>&DH|HeA; zS6=5uhx4q{r60Vr)@8K7TLtl-75_QepL>_{4<8}N(UPmtCb@*aln@f0Il(pLX+4%_3XvdC5;d#}@RSC!31%xt#e+c^$`1TuPBBuXB6xIxqWk z`?HS8+8Y0~_^AbcYJs0x;HMV&sRe#&fuCC7rxy6B1%7IQ|6jI1-yO|_k%|5zely~@ z;l~Y6YuIXlylUG|cHyOVqcuHMX{&+}b{acAq}X?mOkI#?}_dn3dBTr%z7KhF9zx?Flrc zzNs1ePD7!%^XQpV zrcAG&VZPe=u*TD8*3W2fI;(MP;~9<3ZD!@bqdV^SZntUXyg_Em!_2pVxVgUD_(t<= zx5Lf%-Nu;bx=%2d_8w`z>U{)t(G7jZHJ)ky*JrFrZF2lE$Bsdp-?ioNhSO$h1EopAq+=M2Zn}f}b)J<>nnNmNq zxm~&Lg8*=Cjp8yd|=JwqlzkVzsD($i%$U-2s#)0o$j0d{ zt+Q<{%+1>$K7;JcbK8$-Zk*9zBbgf`$F;Ohqn@~LmkIUet6iwIh7KJ{{26puHnz5z zHM<{U*6nVBII_qyg&ILUM!?shWU_g-^>QTDtBHiUYY%#n@1FFM?iO=hO><-YjG4)a zt@Sh7lJ(Tu?ZaujnuQS)OwQim=J6U76+JX&1_i_saASX}H2wRIU~By;8w^+0P{%&d zi{4snvl`u^)Y#F~Wv7}eS`{itMnQ_GAtlL?y|ifult9Z6%RW%`&F^Ip$*YvXjS>gu{< zl5O?Vlg((P^>rr5%~GnwHQlI7TDc=iJLl31m~&LVP^-DOTYYO=qxrGt%yx78uGC_a zsrRYlO|DyGgSnq7f;Wo?C%2e4yU}>F!^Yg&%LHf8V|r7&7_Fnx)^6_TKG|fqq_NssGJ2|e zYfEzW$d)#0=s_X+r$6+jbhPB09@I1S?Jccl{Wkj?;2s341`l=R`-5$FPibkLZXVss z&`7 zv4p4_(3Gaog9fL`^&Ef12=h9Qi{GGq%;!Dq;q^#QYC}2*Qav#NTuG|Ij<-vDnzzZg zcrqD-ytyZN8E$T;eT4*t$ko%LcnU4D=g=bcJ5ytdxMvs~ZeHkV{@%03q~```XO?dC z(Kg-Qqb1$ct1&6uItz`hpG}4Prst6(%$h!CT_3Vsiv4!(GB@<%p1ZRbRlT(yjb;Aa zi#$9G4;lJbp*5zE!!q{_QMFRpV`)^;I5Zdb9z}EfOqv-=E%#P<%#0~5=H2jEYSegr z6UG=HtY-d}_6TomRea4(aw|#oo3`X3e$}%*6w!GRrBi zW@_W)X%lcJL#fR*eP|YFHTgdE=C1xNWFjE7Ng9ZI-FhVMmN#X ze=3bm^W)aTWezOuqe;cA-Gj*%``FTd2&=s>&W`aQyVAHDbZZnpU?KoccU7gOZ5xc zCcJX95p>CQCS7ceZ=_kdaRyBzWRRHauLwkt)kjeFZ z&Gkxt-q&1B7U}ar<}bjqa50v}ORO(?U=}r#UFPkwNK1I9$@TutF+-X^4gpTp;dCXHBKL(gx}h7l*n%x>i!I!e za&DA;SMt6aX3Feu8!|7meDu%rivzQ?5DPBw8!8#TTwx;?aq~ZeJfkJw`pJgaTK^fOFBW}TG4#5 z6`z5=qA9rW?uPxB^yB^K(E*n)V1Lt$rZ&3Z?MG7|`UBUxbnWsNx*A|lj|(vm#Cssx z>s#A7@2!4(y2$TA&G?lq11+hCOOp>>e9#DyQ~IOSL;0(Epr{M5%-x1%>UJ!%E3hom zAF|12CH*-&DD$4Z?8nsyos9aoo6KMu5dT2_m?O>W{SP;DsF{YF_xfW}pSv}k;2Zcv z^+W&3lV{R}8BLw>=6br)xQWhO*|j!eu}5G6eXXEY=abg8IH~;?S%uHB%&xcF-`edT z5DZs8%eRgnW2e_Y>_MY-=Ja~=#?~~+d_+Nqn)kNe=K%8`@{_uzCwWNUfMq^ow{OQX zwVZykP&Glj8mH%<4v=UqSJVCwkd2glBf9( zX}V6WgtyH5Jp&_VHq#di%;2lBtMH*+eq@)QSfjOAWe?1XA zYhnwZ(pGKTIIG?K4HR3v9pbM=X6^ucDQF%Wz?X<-IR@kfa4@YYY5p{z@zm+` zCBWQFyHghe&s^9mAd~!>2-VH*%wB@5!hCCRDVF)P-M#{zrrW}=9)OAS6O`i`Utu34mXAE#+Yxn8(rUKCrA60Wb$mYWcyLLPw>e0hv7`$imQLK zAaZOIT`k-d!KLEF7JE*4Ff!6CkBo0@!`aBZAK`CA=F9EqR5P)~UQ=cx6d1umZI=Jj z_FUXQ>_EjWUBCU0u7UD5qcW{_9NfFT$!$;NzQxwTF4K2lJGTf%jpiTQ(;%Ts4IaRs z?qq7lwzRc1<6QaG_BiW(x&uyk-|t{jG`C{MT)QK?0}huf?Z}G=oOe`9z#VRu;qOi`soPhuXix> zDI@nVJG&rat|Xay+}0(BWont-e%@}sie>R_yIru$&#_Fe!!noZP0Io;shMcfeItUS zV^xHFoQs^?C0ORK#IkrDS%q+v?sEX9*EaK~9Y;>3OS}4EEN|Y?UZ@Ubb;pk6_-=sN z#aO29vD+_LSO3B?w;B%RYwkaH#1~lmjpo`t>=-eR&^%rXJp({3`k9LsbXCKGWq zT{Y029PJ&JwuvneZRXyAh)oSfUwan~95J)0xxp+MNTpf`I(Iv0nw^@PCey*aV&EA1 zdSW+UA)CUTuqiIaGMlwUG5;ATbJRl$xo-x^cvI`ygG(8pp zF14UtrXIm|(Jph3Bf=EA_p__q7I>fTn;gk^7_ZxPByVJPrIvcqQnaLDMlqM|%HMS! z+|B*w^E7owKDSBWm>ErW_+@u9HMWS~?0Q^NvhgUoajMN8rZ<#l(myc05T-!~oKZWMYTL;+-Jr;Kk!d<~jcc-R&Yf}oDc@N9N$95af zS)`B{Fs}?6)ikS-?r-3VU?p82XFi8XZXHZE#GLiWPRCS zI$2*wR}#6aHX}B@5X%L$G&Mub{e$;2PYmAQEE{})d68^hv$?6;V6)mTKeEfUcA2^t z`!l@!Gqww~G(r0XKWfh1oo_4g_x%e|yDW@yOJRhj7+*i*RJvWaJAD)7&BbJtd%+sL zXpL~C@$Bw0d6`u-e1@9*?o@*};O>^bs%%yv5 zxI6W?Jqf04!mQD8qbHh$dzfp6)X-C`u{(c9-vHh98)_b+tGkufW}gF^%!_*rYcf}m zRl)9(i&*5W-9zquLVQlp8tbQ6LeC#U=p}@%w;8EL2s6(vQ=jz>Quo|3Jf^$pP8rL2kZw+vQ5@wNz|#@1CXln59G%Ec-NVt+89nX{%_-^>&#mQmI16PHZtB?|BR@ zzu9wSGhNpFkp|p&^TnP=n2YwJ&iOBjeuSB`*9dbt^p~hx>U+C9e{*bKw0U5ty$rmS z@(Y(?-=eEF51>!}N_(zY`U9Pvw)E^NBrZ4VIFxlqG zZXWHWF0#u7cA0^lP3ghKP`X~*!F=!hCYhR4k60m)Ok@MGLNK#cK2WU51TvvQ zFcnBfQ^7(oA4~`GeWIzFbf6F{T3Mv*Y#@=Yji$*URTGXxBhg$S6-Wo-(QF{SX?nBb zrkUDAB;P$9P6x9+$!nmv4dv8kgJclP^h*|lkz(&GF{zqDAQMOja{>Ji5hF;^Y$zUs zUwjgYWHyksM!bVi@)SrEgH(7bV<2Bs3`L_`o@0Je5!$?sCjOEFHArMD-iWDs0E!8_sr7PB^w$1j<_R03iY?9d| zyGgE3ev?9Nu{PT++b!R%&@I=!Kp2Iv|D}T1Mr&jP;c%?bFV`O*YOG8kAENT+sIc*P zJedy0vt&t4xM{H_-#eNB6V8*XLa11i4$&61FEt=x`5LNJBELnVxLu?eN)~&^Qr(Kw zQJHOXJqy9S?Xp~u3K~G=DM+4tr31N|Y$zYh)TU}PHAVVRU21ZnTqqSxZ(8V+>YfV6 z^HkhSZ6=rrQj3OiRQ1&6DKf~S6N(|~u52hybRZQ>CgR~pJXITwWCJ zV>HC5>#1-UG{BRwXuKH62NP(LLNG_Ilqk@_Z|LrlX`qj$!)e3SN0OdG505_i`&*8N z4c!bid(k2-KiGbP^gu_yL3%EIG{Jr#eLlnnC9KBL!qp9uhkS2&cAz}BJcCGADo<)F z(8gRx`6!R-`)J!O58ZI>ph?>Dh3N(t5;V%^YFpo}ZMHdv3TW#qTKO1fmv~o$&x`$3 z;Z;}5hqvJXXA7@d`KTwps}VmY{AI$cR{jPLuli21-<5uIAG?+t2=<-z*I&rq?XO2k zqrVcK@l%lU3?a8@Pt^yJcKb`q7sUo8tk6HMM*YJ0M-i0fia*t`A4s3P{JR0=T@Ajl zBWPn#O+u~jsC9p^mlk~Hfp4LpnX-J zL3*yk<2J3U>!@t5*7_8L(e`jP+M_7(8i+?c)ygM5ysN<{uUh$xC%&s~{YS9D zds=_dB_11;uo_2;jHAJ4N7`)qgFKHv)i6W*B^-P3uD0(>%PZ8(<^}&D@}Z)?1N3S8q!i$NOoXIC6cEAQ49ysN=SV)*Bk};JGlf?Tdz9a8FYvAgpE`kzD5Zo~t^7TlU5fAO&gPrT$X|o7 zSY1sT^UXBRd=ov9jk?pHlrVl&_aj|tJnFw=Mfp%4S9eyP1o?BzGnI6u@}#9aZ%KJn zukn;;pI(*Am-ZYls_73+_Ij-#*JoFYPFzP9UX)Ou&dQ%5d$;`bryE=T>7MqC&<~K1 z`q6nF?WuZK(v{jX%I2m1bv4FET>Q-tf2wEu_zR;Vl(0hoxElTv3FI2{iuh9v`+@XH zV1p7?;9U(qS8ub;d%~-RJ^24(gA!KYRj(s^TrVg7#O>Xk{^DV;pKoHlrReajtOtsY ziH5(<`e$FVcl&1;X^gKKp8m;AM(K>XgYwZos-GZTsei(3UaF6)(H?p6S4%g-;ZHTn zi}r|kcvpij3Lh3;wes$GKzq6xd_*d}lklpQcjJL~HTanDdke2xc{g6A_(|bM2(McC zoZ$ow-qna7ZRGrM!mCz3#o49ycQyE|@RNjBt$ffv1tJ}3Nz!mCz3>)~AuK6xq|{84z-%7^K?0ttE?EnE#gHN$3`jPR=-|DEjZd~^rT zH}vN$tFxjDqI06xLem^(j;^r*;lH!_=qs|9L&MsCPrA~4luFrbGoAj}h51AExuoZE zmR)LnBC-z}^>H=YBa>o-7sQ|Hl|KIRT>aAca5elTr4YN)AFfb7)d!Mx%XfuGlc}Bm z!gSq%1dZ~#8vaxBZMOMH{HreU*r0@!@i=NMSQ?MDSDRZ*G112jX#6JJ}tVI{*VW~P&E8E zU?B<9Y=a6~*O9%ewxu2m+C?EZ!`UcXK>X(!l2#xx=8toPS3mbeO{#3($ zAbpb9poEp>9SuIU#AciCgjWqS@Da`~@va7+5k9V)*V~;X_sPL+lPjPlBzN^9KgdZ!s>Pe(4^@s7CUtMkeJxzCqdwt92gzKhl`r+dSWw(-MF3mOOq{w~($h zpA3>1S{~I8l6^$-utI)k<$IRw-SWOf8s%&ElrJac8@d&jPxT1WmCBbzU`kp(S7W>+ zmvjC_;!ic~2hu0b*(Ki9;B&%Xqva8;e9XhU8oYUd4HgQoTKODjm*TtH#uxrRjW1gH zl!tdUczs?}PI%SIyYa@+PFLIVzr+FlrsWr{yc-X^tHJB@%3c*-wekseU#h>W!51Xn zKZI9ZEw9gSD`@>!a6sjgp7^dte0}cQ2g0jXKI`FK4PKuU_lfYTtL621bDs&XTKSwO zzN-;mpHH_=c-7VN`aHXDgjcP6$`jw!h_BDZ`$5Z}XF&O!hj+Ctzu1TR@qD1q!Balv z;av?r{xTc%5?*z+ygpa2pT-w|)$;LIIR4HWU$pWu&Mu9ASEKxCvENU4)yii)ysN=S zUuAi z!ROv$J}bOx<%`&$gcZu~YVg^&ZMJzrc-62+`$svu#Jd`NLHHMhS6wY1Uc~`k6JE9Q zDNlS?BYs-=g7B)9PkMM)gE#+VgSEn|u9i;<|CR8ntK|#AoBlk1saD>t?>O4&YLq|m z4wt{T@T!$}>kHo1;Pv^STM4gP`8c~T^}nmZ>vKrA6JE9QQ4jBG@cKN{A;POxKI!3I z4PKv%I!t)g)$-8-2N)^5YUR_O_^!6`g&(8wMJpfo@U8~0&y_t&c-6`$J-n;Ir`}_O ziNdQ^KI-9J4PKu!dxG$)tK|z4zg~FN%BMW>U5)sO_t{{I@T!&H$}|6|ZYBGO_{J*b z(U*JlO&*;ky(`^IjZCbuULF-46aAFxV>$nM)stBNU3G%>o2u(sze74=J@aC%M}Ozh zedu?uuKo5NJ;bAb?$Jkh^hA%I?9r_ro$~0*Jo*-oe$b;|@@Vv5XW#b&bhJJG{>}U%;S-{j zFM9r-=W6irFPMKwc-6{BYB(Qy94%Z8KKV80KP$Xy<&7u4t1bTn^RFr|TKT9`U&MDc z_)Gwn#{5fo)yl^_@m&qR(1ZCegjcP6!V}-s;A4H54-Vk*q+0oSE!Phk<##psbYJAq zbJ~PgjlBcu6XR@y6?j*J&u`8Ky9%!wd%?#&<##ps$X3iBB)n?n)0|z3?`rVber#~G z@T!#`L1jRKM)_Uc+3|cT`D?HwFIq`gI-d184zJ}2%RViSt5F|)e)_QO zxIa}_%SYsS=!Xffx>{bJ*B%#Mb+vp<;-4tI>T3D8@Kc3Xt$fteey&FQrG#%6UbXTO z5ASO58R1jHtFD&M2|r(W)z$I^;TH(6x>{bJo4-(a)yl^_^>;Puug}}RPk7bJ=RLfu z?f8}F^FJZHKDS@_oQHQcczwSAOTw#GzTn|q4L-XqEa^Rr!mCz3ZgV%x2d)NhUt&(H zZ-iH^e8$7O8hi#XeWA3;_I&)RRzA$xrTNI!w*1?%!C>LDqLnXN?;FbRY8!uh=ErG# z(aL8%ysN>-@ejc$og%zy<=y#v9PFL>-NxUE`7<@X=u1ggnh#T+^OLLLFM@xFM(Hi_ zry6^4en}&f5;V%=YVcX%|1G>~5HTd{oxu7b#Lu0={D;D;RzBw8 zT@BteF>iL{`m0tx@8MkyUf;9QUwGBZ7d*#wEC72A@3-md0GU zBln+b?8W%cdFtZpb@_SK?xeXzSrh~9XY;g;Z;}5>-&4w3a`3aUf=ukgYc@Aw+-jCpQ}-S zeJ{_ZJ8}D~R=(hAKUag-_xbE3ylUm$_D27?8hq|DSQ_(l;Z-Z2vbh`j&(+{#motBq z@T!$hdw5ra&kH|U%P(5_J3YMW-;#Yq^02zZqi^=;hdugrk4C)C&X*sMeS;J4Ytj|( zPstbB=AF4eQ=;dRp6l>hzp(6s9!CpTqkYoCzbXDyD=*W#9ai97-C2E#A4l^6Z6!^)u>NF{Jk&!RBL?-xQ3wwjrzD6eC~SW81t?0s+o8h-q@g|^p0i8s=W6izWo$4~c-6`$$OjTM;wK;|L4%Jzi!Ec05?(d-B7Tyy zOT4SWXP#q&6NFc-e2#n|K_h++f)X_N#PirP<}~3|W3R2h&E3G~9c|0MocY;We$mRu z9ec!gHTaa+&kZdf4}gmmCt(0?`j+WC651u#uxop(v^;!#|W=l z`Fw3h-qqlv^pta?6NFc-e3bE0`CV<}3*VseMJu21@U8}*6Z_MISFL=?!@C-M>>XIr zdu)YQt^5Txcf)+3dLG$FBoC{rNaNot#2yIQy*EJ9y_J}pZx)G8i2k#Of5M|*_2~CK zdYwmi8{Dxx{XBZGM<49bV?27IM<+abnn%y}=!-o1Mvq4Oc6NTei|iY0OY-6Y(v{AS zdFj8Mcjx0z^#P*%KwBxvxi2A>oDW8qaR zpT`CztiZb(eEL6Z@U`%&u^0V6!gGFcwR=2uAJXyoIh@!A`e^zk<>PotdVVio_>AK} zO8FT7s#lPnt1zv#JW1IHjrzD6^`WQZS&J?AWPhr$7xhWm+zsvFYVdjC2MMoQ`Gkje zHTbAJVBjF(RUb*(trp9?)&{TDsgbFPN}+~!=qcf`MHuAgeved%GI-iw|Lck^Q)Ss$q}zSwSBp}4v zu2i4Mo*e&fiLd$@(v|8Xx93XbQQdo}F%er*UTo{pyL-JZr{)TtHGzovB58eSFL;w8|p9-&9`2vh7L4z+qP=W@Zn!)@J!mCC;;%7L!#Jd`NT3Cn z@I~QOSIg&w|513=$``Rg2`jXpt8M$8&-LHpVD8VXXyx7Z0`F?@i3^w?B)n?nV+c+O z8hi|b5;XXX@IMz`HS%#hWwAjCD;wX@;N$Z+{*l6~h8g%ceUOxQwT&-)LgR~8KEm!x zysN?IE@p$%g;%Y7k;9jGSA)-9!u;=qSFOASo$|Zd^7EO$LV3~3Cq4094L))y^S21E zTKP#HUiCv{kMni%)#~mid7sbxEb*1@zoeu*2mFG^qv|6_SDIhqp7OaG^~;ODwD?o4 z^$UA=SA#DIf4lIim5+FMSA#c~ar-_jylUk~cz9QLHeatGe+|N7^#|F|)$+MpncqTq z)g|8Z_o|_AiNP>;;}&qE6Y0?eE1RO z3o(wb8fKUeBcAqiHTdWg%zrJsYUSPbvhms6mIr(+$2)!$UbXTODgzQU_y`0gXz&T) zw;ImnSB-pIei&1NuEeK=-&1(i%Ez4X2j10)pL>?ee~9p^m6zdBitlRh$>q!+CA@0o z3n)A#Xv8l-P=W>@e}VavhI9Q@BOmpr_rco)4c^tAU7vX0e{nkbuXKHq{42+QpYm~k zMfKOD=W^&$e3U2axxeIU)F<*f`-_cWf2t|V)+cAZZD`OZ{F%b5RzBj1?`p))2!Dz2s+CV+gA!KbXyIz`k(FHj>x5UGC0(gMBA)(m zHT=ciWq;p_Kh=nj{)~9;H@X^p;(g{f8_E5tTKO4&*n{8K`TIP0)rXQjz8^(i3z3yEqeaI=A168~daCG@=vL7NFW#ec zj_Nm9Ur0J)b9iyBN8cj$sW;jFeoy|hlAn|OzkBjgzs`>D_sG7%iT?@dO2>EczubN& z9>)Erx|Q@?hu8LWk0-RJtI;2^&)MH&;!pJpKK|b7#X;a7{#0*!IQLJFl_6_@{LbpT z3)wfYE4$p2bfx-6zUT7YNcou0RNqUwQhlT1Q_JUS)Hg2vz7~I~VLuQoHe`kRx!UqS zaCy3o;_}2rE1v*N2^xF?f)X_Ntl0MxUN!O&e|8^QP=W^U>dxBJ`+lK4$$zExjP~aK zxk2KqzK3+B_Kc$-l(amqMtxF!*x#4pPc`gOp8{u>cvpi@gxR3S5!{}tl|Kr>DM6z> zRBuD}5oAc(!=s0j#(a^GfZ#i8KkxfCjv^lI*XsFuW>(7kB;{i~s(zVtrS>bO7W*! z%j5og1JuXW;PZPjzfgG9%BMKH6yMe0Mv{_n!8hCSLd z>4~qpK=v3f#ecEEzeR^vv;I+ZR5bi`HlBKq={Ub_NxIVUm_2~~&!c=hoEmz zDJ~M?qyDZ&{d2;9BK}mv9`$$aEAe^ZzZPD#@(J>R1Pwj`K?xf1qX%+*Hu)vjM>X;h zKTaPcXz;EEpAvpY;Z-Z208B~wgjE~j7li-0@T!$>>&bxfu6Fx#6!8t>8>>q^dI4$l z=NX>)Au*im|AWL=9sX72{>(@WEsv|w9%cmlOAwFop&FZL&kTK#{P>LUZNjToKF@fG zcQxWCM{@jgg;%Y7+QYlrmj5v3uhsI4R=()rT@Ah{_KSsAt$fnMyBd7raE||^@Tymk zo+~U?>Mw&0(c@^_)wVuIu)hIgr9VU~KZ5a6d#c`>>@mN@Wd8UW>4?~3HQJ-$ue0%Z zEZMu`vw?J_@fer#y+rvKKdRp)U8(+QDHGzO{;o#-3*s+&B>PhhdyL23JiMzrtIy%& z&#liRaUA~$;Z-Z|o*%~{9x^ClW#b>k{P7xJwDJ)cQ-TH` zfuIBpJ{)I$n((TTkMZD^7rd*%M}$9Hc-6}1u|Wwd@U8}5JeuQQuH_dEd&G~>2MHQ{ z1cDMY`0#kGWTWY6j|Sh_cz>Df8x*GX+oUUv_lT6|5W4Wi@vC|~ z>A4QC<&DWcXw=u$sBc32-6Z~0-|OSA;PK~b_=`>8_WM@+sYZOXUj`eLutIrU4Zbju z`K{tyKh>}YpT-6ytiZb(eDYZ4qr$6(J@_ZFK?y7HuI{XVeo6isEXj+LNLT8g=p>H+ zg2Y$-HtD$zujPrzJ}r-{J1fsVM|UjG!K5pdCobj5P(H?s>ibDoDo@^19#^A%Bgb?7 z%y{;vTI-X-1|_V}zODwJ`8D(XgjWrF^iP&PNXok!eEbCF_Yz*U@@d9PysN<%gdZWi z>SIY)Y7hDun@w6CS9jJw3&~%Duvpzgx>El{PUQM*HbL4`^bVvel_x4bwLGr2?IZj& z@fR1Z?UVKJt_E*T;_{p&ylUl>9^Td9lfuszUbXUR5ASLl|2G`}dW|ny`J9J$HTay^ z-!Hsslm(&>McoEs*gJ!P##y?{tyzQ? zl#X9lgHP0RdCnAG^?aZ5xID_^YWOp!u)kH}PqmiEEkAfygHHx5Sgd+>3M=|6t)&D_>;1#Jd`N zq=ETg2(McCI5sF@HI5dp2A^zX{&3+{!ye^N&<9ERgjKA;=Y>B`c-6|M9ec!gHTc97 zj^7}>>T3C-@Uw(ht^Cp0poA6TtG#FS-(R#6Rq!G9wJ)br+ld9-_HJz7p?DqZ4s^S zPd!`hm$CgE(fU5b%hmol&c8vlzCZA8&0o&>OGWGZ{hrl)xxjf%w7!4ueYJmy`Hw{F z`|&;%t?#>Ar~C@G|3-*F8(EOL#{y@!th4m4l^?hX%MC<#<>NWpWwoi)I_k*1)THp6|rD%PB*Fw?yKCTBv z>-)8qiPraJy&_uQfAvq%`aY{QqV@e$>qP7Orp$@lp8Ec%UZVAVP<5j9{Z2cG*7r5- zE?VEew2x?gpHfV;z8`6zb_49 zN?VE6_gCy8THi-8T(rJl;yBSpp4UHFbXatY@}kcct?yH~P;^Z4{~%i5cW{&Fl;qzn zIwSfa(K*r2h%Si!yJ&s>|0>b?JpYeH>+|`)60OhM5B)~Q;{a}-exmhx_WOy}=b`^f zv_9`Uq4uMhpD9|Ow|$A)%k#8v7Ol_2en_-F-}+_I`n>9oMeFmYzZ0#`lirNZ8(A_+8cW+5Z=!^?AL$6I?%i9_m2R`h3$vMCwO$de&&w)^*5_aSN3=fA>KoDee5%@0xPA0_ zQ(K7E=SS@w>+>u=6s^yv zSSMPaH(@4o`Stk`eMIZ?Ao_{c=R52qTA#PDzi55_Kuom$d-QRl_1}}9BwGJ{c&ljr z_ug|v>%X_YQndd2<%OCr|GxM>(faR$9}}(rUiAgh`tMKQQhWLLrE5j&zlZupbYA|w zMb8Eq|MGj~?L_PEe|HhBzh~V~wEmuRxM=--V_fs)_lr|R>+cQE60N@X#M?1O{0uo`F%oP(faqgoki>4-}V=+e@{DHwElhU zIL(*8cQuLDzhBK3t$&ZYRPE*OOE;^%{5|C_qV?}7Pm4Bke{!Yf%l)kXh}QcjUy2UP z_ubGGuCIPy?hjo<--pi*8Km7r$IfAWfav9-4;LN&E$2@Z9Tz=W^eoY>q8ErhSM*ZR zY0(AIH;G;^`d-nKe#h}17o8EkLiBRcZ;M_j`V-NEe$V_jqGO_aoXYi2i0&tPk?37T z=S1%>+N9XuVWOj=Cy1UZ`V`S=(Wi^fi%yANFZy!Pk#pJqjiL_}eVgcmL@yQ{6a5#_ zqeMRFd--ynOo-W#4#Qx6_-Cy)2 zqT`~k6P*-&r|5a2mx|7aeqMAz^c$LgF~|Er^sq}5Is(L(I<%>bSd-AqGO`Z7M&1%vFKT%uNA#s^dixb%h=yTqLZSZ6TLw6 z>!S0bSBox){z7#B%h_LW8n?$V(S1e7L`VK#d*1^k=T+S|4yDk9KS~N|noum#;yTS? z|IF^}AKEz5?n>5@m9*BbBs(}6&(3_S9q;VScxF~wi4eBL6gLN`0wl51l&JiPIgk>C zkU~QN0X7gCw+eySheD1TNbRO>>OjvaC23B7_ub!p-+SN8T5@K*bx7l`j6eh=~Ih(AQU=Uz?!)5MF!Um(7h_&*U}A$~&evvHqwpT7TX;%(yV>KcBD z_-_(lA^tnWcl?sR|Mw05bH%SD-u@NEhluyQOYuqKeZ+~qf4_!r5MLxdO?-*?^~AaN zYW$xk-XeZK@!iA^5}zmjkHqgL{u5&JFaAwp^9T9Y8!C?rUr>JEPi+2ot|vBo|5p&3 zeai%~*|!|9_+QlYP7s@Y%N@jK-*TtnKhXG_7XM+zZy+{%m48NT_8a#RoBsU$#HJtp zL1NR7{tU6{M}L9X^c}xq_)+EmD6!pt{i%gNrs4lv@ONRMdkYr5_Ka& z{P(u6C${fxzuYjtxBbJ0`MvEi!*^)<|Ilzr@eHwjpX5~*UeWO5#O6Q#cEj|)RwXun zYz@Qo$F^yh{@7k?nEu$_V3_{c-UR%@>u`U2tIFpc#HRoFL1NRtdWhKcsU9Wv`cZdj zdZthIVq&|`dO5NA%e#r#?u(BR+x_V(vEA=)+55b&elxN8|9p>Nj3-}b|M&p$GVzCr zA0@s-{5bLN2!=fNRb2DPeT8@g`zZPQ&%|br^1t~0-bYk^-`P_B`@W)huizIzzCWw= zTOhtbyk9W*nZ4Q(;_cTezuSmMaIP$WRSUnfT(3PF%Ui1*3lVepu`GFBpD#NW-7MspY$o`F#oT zA>tvyc>nuY-}{L7eO}YMg?JCcR|KQHmzdwX1fzWB-|uIL&0pc$iOqlDJBjz4*8Kej zag+V^W5l_emH%a8)6f5^VAR)p&uD%BSK`kRf1CIt#LodAiT?=kiv^>+7dYSDNPLC( zm5e_{`OFjVBYw4Dl-KMxHi*q1=}!?~{s&sVpCy)a68ZZV#QTUpKy3cC9w0XVOb=T) z{TKa-Vfr8XbBj-ZO3yo^`7{4sKS;cn{&gma&7au3#iu{2pCmT_RxNw~^mn-YzlqrV zp}&jR>_0wgnB)8J5t}~K*NHE@RQvn4h|T}_4{T}vx3?X;+%R$TUn+hjvH3f{h1l#3 zR*B7?;T*AjANf~^?fbePvG~_(ejYNsrtR-fiA}%c*=IF>x%)LgFC)JAZpCB7d*7*e zj`+%Z6fY8+{aMN0-=qB6_Wq5UpEp=I@x8=m@AH0Q^H2U6!}MQwg?QgvmH&SuHh+9C zILG$9srCDJiOt{OO~mFu@Fy%j{rfeE&0pg^#OBZc9Tq;P<@*id3qPpk`z-OLU)B6w zw(uE^|A!XN?;HOav3;-mdtSr(V0(L+U>OhpjlMrZyzjRa&oRE)3!Nl3{{b~(^9Qg^ zZ2k$}PP}(p^ZU!hmr9C%o%oJB6n~ufJm>$11Y`YriR;&|5^obfPP~`++kF4Z_iK88 zZd`Veb>a zRxsxG&vAZ#i(tqg&f>GYfEN_MQ5#nu& zPya>diOv7euNmg|86F@$|F>D+#Fsv%_-n)?pHcix;>({@{G4sg-yVj4FYyx(YWNMr zi64!{&e=6txwk`bAir+?j2l>5|c;6>9{I`hBe)f|VenIDt z%f#j{>x#vvKe7KwZ2r_<_>Z-`=HKfEV)J))6S4WPI!tW-w0^?gpLkYI{@Q{uzHVFn zF?YP-i0>Ft zJW70tc!v1=0S!M&{KT;05^;0C;yUpjhQH1*-+vSF#aWGipM}pTzMr@`s`w+sBR462 zkT`cx@x#RXD8FwIU--C&fA`O5`R)78HxS$RgnyLSzDIj2v3<|EM!Zb}uDgjZ5dSjq zp5Ih{ziIE&zuyDI=HKwk_WlPo{^J%-e_PMGTk~uF8DC6n{-ACkHvdwS7XGg9a0wnE zHh+XgV)Kvq8e;Qz_jAPN|L?uT`z~pEpCC5>bYCJie|?V=-@*9LdV}WQ?B8EPZ2lpK ziOs*%EV21JTP8ODVe7FbIgC*JqRioXqfovMAi{5|)L zG5+ohzCMFTGk7k87c%%*2A|B}pUmLZ46bMJnGAki2H%~*zm&oMDuX|j!C%VYKhEH9 zX7G336U**c(O%1KA|C+FZNGm=D+11;f)@HdggDPLo6%SVH)%Kb&lJEl}huK!OQ!STjjv`_@ zD5B8tt!gI?USBGg>JZt%Y7MU)*y^;jUsO>=yC^xw&YJT4k>m`j6_wcPUvvX2h&14A z^X+>?9AZ}}o^DQAcbM0*SN6A(l6DZG+?;fd-8>WF+m4^uPr_2tnLm1{(O7TiigS%) z$wsM}D>5NQIo_;bcp%u{Y$o-JPpy{t5Xe4AR}td@L|H%u<*JR{Y$c5$-$u};XE)oO z#>RYO0F6XSQ9Q6w?JSixnzf|j$|+c93JAXcs&;j~<3JcP+dq!KTv5xnxY@Bs)G}^& zNncJ%txDqzI=YsLqf)uG|dPPNt^#Bh^Z0cXhT^ejM7hgDyxG`fnFjlDjrb_0BGKCgo?7RjJiZ zZjl`HU!cJiM2B2$e=F5a5d$LT1ZjcmbLHjIN)5x=`hGrjus+yD@i}&s9y(vr!F<0` z>R);+hRoy`@@J|8s1P@C^^ziZEK0>|)`g{mSV^@?vWCJ?(@0iV+d6eH*7}SDwGG|o zkb6ajEEnH}jpSrb+r6c}aI@I~lH&s61a>UdM!o-f(ZYy~mO7=*CgxfHco@q(?0%Gz zbPlvyjg|wmYe{*1sd}o87g`#QoXyu)8yZ~05bmDl5}kpOq%78CO;)Sc^$j7+H`3KD z;-FR7Y>xC)=1fOcO^2~eKr93uavetVsseE#n8?v_W=i!6g4Tb$dg@&16dsP(o2BwP z`W2pMOP#Ut!i3aeZFeiN=4ui7U&x5B?`e%?K_ji7PFkJihFj?Loh(*`m3DLZ?B;11 znN-a4vK^i)bp|jX1iiQ1s5M%}a;dx~d#C<0E(=;67uK+4+$h!EBV^+Gx;iOZ-niY%SK&VR?AWItqD7@BMt`^;4ZSmt71Z()&~Dv80)lI!7_yCz%k5bF?MfF-*5|bh46k zma6BHoNVTIaddF(Y>anPl?`xx_XUP}Q4=dZv;H0wMlw(TaBkg)?YGQWrxN9Q)wP-NaymKL7sa6JXs&g#`5_cab#rX`;(#u#oaBWJBq}+-wA*u#<~KO);UqIkIFu#$7}c&QplIxcMx&WW5&=Ti{hKICnyRPbZBNEC=~JGH zC!?iNr{wVfMKU@O6nt)0pb3aUA|DmB{5v-*xze{!91zM0sQ}EAbM2-K!0vgml~fis zH%b~}$i>EP1%b0`7^h2;y~QbC`>uvNvO#PY8#o~?t+YqnzoWTgyIiZ{?pps3(G!NR z$B9YX2}7l6#h5X?FkQG8r$Z*ZFi11)-x9GePWjgq+Ivx;$Q@C;8jYv2~7BUQKZ4aJPZbNHd%DN-c3w56gvxLjn`-kLRm^lvyF`v9LZFc)=KqyqmEm)7OpKV&k)8E4o|XDz?Pv}*(}xE zZV#I$NzTqKUD^hGRkd@Q&9>Y@RO_d9WzY)PNhdh2+>>LcRu)j)#S+Yo`WAM;V*tIH z2Q8M87j&el<$V&u zgS4gE3Zn1Ef7Q)jmZx;XZs81OX_V!K>B(3HmE(8?QFmd+vimy4$&?K@OsIj81IHo>!l+=EK9(mi~Wy3#0RLkl37* z!cpB5Uv-zeII~rqp}u<$ZVphyVO*);e^s8IAE=l8-W|t*t z8elHRIGGTgCEU)4_L79+grU)@o@>-QhS6xig?dYNc@=E-(+zzpN7ul*YFXM}T0<^Q z3Z3W?Ax*?6D5m5rJ(dUvJeeRRJe){t5s6y;=_9I0&jLVpVgPwLtwxVnmB2_pu23n8 zNinJK;!fT(ZLBb&71JLsH*;-zJ(j@vCIZ$Yvs`s5lG{qrJTu-G(>WaIRe-G5l zvIN!LXWuy}QIA==9a7f&`*dduk}74Agw10UmqDs`{Hn&v07T%G5w*Pi-UlOHoI1;*3pD3GN-tS zaUtaGl+AO+fJ9mOcl)mtubWUFoYuomr4BFugF<2Df~LPPTdI{eYfzp&(C)y_p_3eJ zv}Q#K!`*?KI>}LXh#<=^&Kd)$=Y68e}M4NOoN~EO1xf zP^dCvfxgEMUna-lM5$I4HEZRRE2DCDwYXr%@xnLSh2(TnlU6c-_Q&$*tmh6uC1LF) z$_AQ&DLjb7VvHcdT3$)vJhm(mfj4MD3@oHq-PP$X%8v|1f|pudT6a$H)PKfJ$E5yeE6v?G+un>cNAI{%QhkkC3QRhfmbNyEax!Tpsxp@gpl(Pk3uB4vSll*H(ktpoLPdI#j9fs(xi zis{|)BZ;`xS1gQ_iCmNVeW4snT>Toj@8RGYm!_$ukeKtd&`Ctkb^wix7Ei?`k^d5m zUsT@+Q#nSabIEc8mU~V;7Yzk9YZnx*8~0s!H#}(lBW+2Odt?|ch*pAWPN6w6oc%tC zEgR@Xc@yz1*VZIl?j;~s#Bqu=_r+2h1%Zh~pahEspmD$kYOFfcfN1)z`*B|d?aZ08 z9cVEpEzy>(+@<|Sv|b%EJm8F56PU=Qb7G(8bBV07uWh}X^0Wn@Kb>-QJD4S4$^{EQ zIePQ=TH$g=hIr3ic84&|Q03$WPqtN#suemTJ ztl1jWbDM<{sF*BCLT35s1JT+v1kK73RoU|F#!3TMm$IoTp?B=!yy981D(9I6^gd*@ z?{4RlM;$^Smim!%Sbj<)kEo8a+&FU1Q6VaKHh27l>igq$kmSPGf|rt08wt!p!j#=k zkaM_kJJvvVOh~k3$9<|6P3?g!ah?ly#X15*Vw@Uoh(QsJ9D{->J<5@9L&gVV+$q^{ zyI9c85>+H*u5VdiWABa3g)sI={sv$#B;$wK3rU3_Wv9O@mPo0bK-B{Y<;aM7Afcot z^cfl*m5NPazmAjZL|s6fRZ4PTO$$p8jH!Z zP!x&c>3oL4Ukoa_$_`Rzz^;u|*ag7wkW-V4{yO4wvDSCr)a21KG4#XY=y0jis&2Vq z`EY4Hkp-f^7{Z7qG~Sx%3aVZYQZ8KYaS4~Z5zFnW8NjI zv$eO>fP{D(b~34+TI*08F6#W~gv_o!?z%>~O#|KhY+>!QxMSPe#W{ft+43-~$k>YY zqmI%8*bVs-aSC(^_unx5$)vNLk|Ak!s4z61ht6F`_E)iwOGi=( z%q6QOC^Feb8XYh)d=;4~VQ0(PzH@ku5^_e5Y#<9dbq~VqEWt`NwWr*Wl@o3;8={;g zyDpd$q9d!dSsQw!BEtc6=%L}Y@Oav7goPJO7li{xU^(`1+dX&mez?@eZc|I`s7D%% z?%FNo;XF119V~QYf_QW6r3$ziCAI1}t=_S-^>D z4J=OL=FRkwg&jyb@GN-#s0#XdlF>$Q2YucgsZpx91GMxE0IdcW6q^I7g&^<##7|7! zlZvu{eR;K`{cl||2+ikXrMg(j3lvu}4uzL{PhVYzTx=|K!wm)3>I}KCK2s(- zTdumJ^S-Z?pQPCu2PvjMlS}N3eh{tJIG~7g4LItmRB=9phU@MG3?Ii$TTHPSa}87P zGK%5!9iv!`xkjo4X0()&zL(N0mW)aIj1DBgBDZs9^ZxWTJL4dA!FdO3^W+%3J(Su5 z>4nAtbs;Isxv4wm97H`^+UVZQyv(tj)0Z1MrCX42cQ?@3<<+WXInfPD>_V_T))2QN zEY{@0uw8_OR=@M;lk|ozR#Fvni6i4W#NCbdxh_%eU5v^(96!nizwd+QCn=t1A;r=u zS$Pg>Nb?NPz@qfsS(bA-7n1dKw~HJeq40DAuI6O%Fo<^Q^SGAltl?gu@-((5GB9zU zY_!%Bm_hZcLakNobMHj0X&*2zZ3-7koAol!z?8Cdw$8dyyzE4v7hqB~N`=&M)8N=V zjndKdO*l)X)#Pxg1|NlksAbE$lZ_+|1qVr5)*)w9Q*9u8c3caRiIfft7+g7GeKUxH zMFo(gk*?dyYP)hvIZr}8ir^XLH3st;g{!vmRcxPGTZh~Y$`TssaYDuUfrJEmF5B$ID6U0}pS|oU#FonLfQ7G*i zOgAhF^ZpI|tN-`>9i&$JBca89@Qgbjxe9Zx3C4ow@!)xvTm?K;PXId^%?I|BX6u_; zUk0X>DNziOdq(X+jg6-RUe1)cI~AlI8Blw(>NKj7qMZ3yK@NPhE?S(Y^j(=hIsGOryh2=F3^LjoCg1!P{q;aO~z8Q4!gv&<>gz|n4}-DQ!#)OP5vZta*A zf(p%+PfqDaNzVY=Ft-lHc09Fn>SavQZ7YykjXVWo3Pg=8AFjbzp-ZXzX;Q`Z+C!1{ zbZ|?G)w#Q=dWs6Vvg((aoT?c;^kjEZiAj(D+yZHIu^e5iCnmSjfW-Q3|KT z5m5>!M_~f(VPRw%OC1l##|zQBlW|hxlW>WYMxLAwlNz6zm<~gy$D)*{3sK}koU4fu ztjc`Kh4GOvslw=FScF18AC|W;66FdBhoR$R`S9I5mH`2y{MdBJXlyJ~-h7y=vHYZ5 zS*z~4{0}L~|G-ZEhcI6Na0y{yWGu|Y_}Ek=nyINM6O;K!Qd4nKg^?(!LX=ctq!1P! zf(zmJv^bRUnJkP=hq5S)$M23sg&!}-wkCadA`)w1VkBxe(_>+Y&@!U(#zG$-pNz^| z7!5OtOhs*OB2IZ?BFxqJ)Og5uVzdy-sxU3;1-=O56H&VvpMV$cG<0fgJbZU@I%<)V z=YAJ50x7@Y|Dju+y03lZP3f+$h=Y>bajh3yrMA(RG& zg;0|4Iv(X21rCxz!ePp2Wnra^74lJ1g=o|mE5t>ZiV8S39+zk;YV8vvQz74pd_2UA zOh$RmN0l-H>9J7GW1|ycg^rCxv*1`p&eKs3&AWc&KcfY8sNNrm z>Zz)FHO05$`jdPz;>o{CAP0iG;MF`;)m8WDp$RiIadAw#gZWr$XObq-r?xNkb+M2W z4QI^gUVqo?oI++!Gtp@yJ{2{#P(>$up^~{K(B*}E5Tdy552KJBZ(eyV#+BYZRPYv^ z^?1s)nQ3-k;rG&YF%1M+L^^lE zbE*!n!0o^MV`{IY2mbt!iGaX=3e*eG^4v>VE!^NcD&7&5L{x{;&aIt$QL&zzXt<7W zc$S-?K-U?XkLG4X-UOr>sRGxucCfyR+`;rP$O?0abhDXENj{$->7{6tbZFScJZ2Q> zNlj0?o%oQNosL(HAT2IRTnK5k;1zFLi)R@LLKjygsZEC^DUl*qS+;494A!2i6}U4& zjB@HKEzF(2Ch(;rh3>PFTes(BMxnlzeiqTyZtURTK=j>2L`a=4xfD`pe!^mJ22u$D zMSEsSkP{Kaz`=$2>NiL;YFRchLTXr@64LkWn;4AkKR1M=qf2ysH@$fG&BO8WNTp{j zB@Ck+vnD1;cRn&Kk&L9LlP-l6ny{pyVc?^3t$PI&Q{$5q1p2R73Yw3y-Gis(uVScHd!ass?a>^lRTxsbh4BkkOjDx)+>K&N z-geND&0G{JFxx&{btM}p;-8!^)o zU?r6Lz*K-eFY<$DbDW7s=Ni>f;TOkW#?aE%=unl8{N+XKtn-Uvp4 zlewB%Y6A4BkUBrW8!l4D%R=B;0Wo5;TUV&i6GK%#5aTChWfaqNqR!lL1ramrAu0XN zpD`3WDxG{&Dbc<#9jHTtL&>oEEKO@D<6|4BN^yoNftGZ_Xyx2 z9Ui2($17P95)Km;mAfqN@k*A28VlcY6==EDIaP!8+2`Ct@>CqSa0uTD$UUR`lEkT` zB~p4OS|+&5%1(PB+NB6yHg=G1*o-i4sl2@@posE_4Vq3iqi?i51vfxVHlH z4q{oMSmRC2>|9{lUX>*lgQ1^H7e_5sG6pZw3G@{W?lypNc@3ka7BLVhW==nXVGP~* z3p|+Vcd}8%eH7fxK{>kE>cG2AvAA+BX<;TT7B`ZOa`SAlyap@tVzJ%9eoH`cwN!;0 z`;c-9t`_0T9?igQ)K^`TuQlNA1OLdK*9Jp0N#JB-qj4H-1`lmnnl`1npzbdgPH?GO zufTMUh8YpH>LeDC+VTl%WGEt@DT!n~$!&F0d}pJIqFU(2W+&O|=BMPCq0&@wD1Lpj auGG8QV)#`#TdP1~n=3_pR!KfB`+opHE)mlJ literal 0 HcmV?d00001 diff --git a/src/SDL2/Xcode/Frameworks/webp.framework/webp b/src/SDL2/Xcode/Frameworks/webp.framework/webp new file mode 100755 index 0000000000000000000000000000000000000000..56b1e59cc3d6858016c8e6fc0b2af08aa17a556c GIT binary patch literal 730072 zcmeFae|%KMxj()qyTAggXVI-jjS>}GB2+$rpDz9F7e9KLYAKCjY|e_%-tBN&QUya}QH6 zXe@w%$_p0Vbx-A8OZa_gKRQwOTvVnfIY83?k}&9f!GfPW5LmMK=RZw;JQWw8uXj48 zpNH|_IT*&^G+^BK^9KeHaw?3%dZ%O2jSdGr36Ed(Z@~iN=Svs={LTf7f4=ZO6gU;e zvk9l86#4Z0x_<-nSzI)?XmBaaLLt553HQ%ndZ63|3x1AyP}5NvSc3O2*PqCf;2MGh znggJQ|1DT>&yW8ZjES1daSuw;b1?3xFAEh2nu}BLIJ6&IP&a^n(DUo@c;}A;KTZO~ zN{;PfxAULYhx}^|~D4D>a_a!EK+0I)(T@6aRC52K927 zqi{*(j{}P?UwYRam6t7C^5c8&T6*7-yDy)2*OCVo1Mim?@fVc5$l(Z1!js?=uEyg@ z{Yd@09q)xe-j*|5j;^znbCKFw{au&ijnU}yD=x=uco>m%%uZH%aFoMA|L3Da+wkH1 z6tJ&&PJYSdsQrq3qBUygU~ExgZb`vA&&Tucyy5c8?jMIdkTn<-8gP$d9yb}URF>!1 z`Fo@^$K}QYOD?}>@g4O4%?~{gxa;1_re1dELwIvIzKs$DW7(xHhZjpMC;3ie`sUv^ z82APQ-(cVy419xu|G#0NT>Sm!TjrU)6Kxv#ZPM=*k3%GM`qzf;qNo6Jq|teeU)c6-cGun9=e6z!?)r^2Iu3i@b^f6-@;InUbm2o z_Hz1%NQd_7b<0$B8N8Fr+Ei{4^33X<41ERZH+q96c7@xU;;!&pO`m3%-A=P#(;xXe zwbpRL{KzS)yUhf0+L04He!c$4Ye*!@dW!Uh1U`qFjPFQ)ufEmam*?-%f3Zt%`0J8< zQ9RBqW{z{oGFy1Y*^^+;#J?^5HuAmF--Cw-pWUd4qzfYuu5otFdW>gx=$$~RT>0W> zPKR_ghMEHB%5q!G9p{ndeR#N~(JKPuT*5al(P~zAYsPsB2w?RoST?~re1}uP8Vig@ zgM>W{7U=CmPdz}rvzAa2&&X{u_e{KP!H+6-TPsHjR6^IRmCuDa<+2(MQ)=?KC<*FZbU-P_Q*o7XdZb$4=<() zhF3o53mwtd{D|JFy>fYGD50+@BM2Xy)DGvDyY)w}r?>8tT0ha_6?hTHgwe-vvmAl3 zvdk-|XN$5vYWqxrLmA`fZ5X|kqo_~Jc8OAVXm8Ewq5U_2VEs7BHzWB-Z2 zC}dU|Q%R?S9gEK-F<_x^}C*SI`pl(gum-(OuQLMj5SY=66Kx3Z!h)c9zlnM z(IY++ed2I@x;00Od_2}F9;3DOqkU_M7WrhX6}UocJ9+dIv%1$K+Ob9gqjUG7+oDCh z7C#F_aP)nBYjvOY7HUL}kJY!fX~%`XLss`_i81epW6m=B%!*DeGNxV32d$||CHk?? z1ujAIqZ;Wg=BB}v`9#rdQRGEqqnCVNmUmIkoNOZ7Ig_j`ulRva+&@lM^oSo!wtQ!5 zyTqJKasPPngDKQK!|klLwSG~QCCfSpd!+>u9W9+0*JW83XZUCpm1ZI>OWj}>kz->q z7Kvn+EOY@Y=CRY3jL6*^yN}R$Y_z`OOu}ZFPu`y`j80iJ4j2$eX~d#WR`eeIP+^!^$h`(Vu9_Zq0jBeFal)53TvtHZ|XtY$Z#)Ns8IAnDf zW>A)O>s#0FAcD+0Ftp#QmmvN1O?pF-m;>Sh!$g-1q>oD)?$D7yrdi{07^7v$Y+{h1pwkg8;acV%*KHNM^|6K2-$q9wk+|6J zxt5GSJ@gEE!2{6i{sqY>8P9moAH2XtMGv=n_|$_8L1bpB2bqz08>b%G>Oou&nPeX0 zLDnW7lhmU?J*KEfv3eA$$4vDoRS)hwFT{%7xlI+j2l!`JQr=d$&6hf$x)NQ zOLH=(dy&TcW=gY+#b&$rAA`zGifuukc3Wk_(cB70jD#~w20?&Qso-CF{ z^3UARpShtwb3=cohLYc7CIDMcZdw6}Gapju$q#Ee<+7e!MR{2)g+_v|?0ajR4iG~f zH9+&r`bYue2lAyAb1TC(br~yv-L05&QEpr7N;%PEO&>4Hy3IxpM(U`kfTXobT~?tl zcfX=9IoT^Fk1=;;*B;MC4dYWP5iUT|T04>c){mpV!O8fWn^?G3W?dt)u9I1LB5R5n z&8|&kql-o?)&TIiO~8~sHi)Dn)!*h~?K`z*Q#KQ$aY(c@2d4p4ZFBGz_4uiJELD$3 z)MKN1{7yYyP>-m3yrmu=smD?E7y;Q;+Z;SwJ-(wJSJMONF&k+r95vs<*qVb^s~X?o zN8t!6Aj5xPxh!|f=emGTtyviRoGUsBwf;SFMF$e{v0i$GBJ*101D6Hl87)|w z=1$c@o-AuQta~;5Kiv&v9M;E7_u@|xl%74v9FBDDc(g2yeW}+ec#Yo~+H2g73e835 zEsqwRy&V6dMQ5sqt{$V+V+1{#YcEHw<u%#jrxZV=L|KQ}9iN=0XW~q2$D^r$ zE|!tD*@vYj{hbM~+3Yg?ec3mdC%k&yMQ8&>^@i1%-$G$|maOizmR&Pm6pVwoPWV=Z z-+mEA9PJ;_bOtA)jQ*R>2cBk_5Sj(NoKOJM+mSdU{%ZjN6(mql1ujLMrI?D*Bz#0Z3(ZCv0kHbN@Hh7z>2I~_83|z?JA`~A zjh*;&_-$r)?cG4W6sn(Z%hP3fuQhYb_y^8XDmNj4^i}F`;_NsSXm@Bu5=*R;D=c*l z!IJSC#!&E*{|BS$Nsa0{^ixi*O&m~qKc0T~k>I5OsRxQ0NusdkO{?HY?PZ+(Em__J zz1{_`jFHRWLV$>$c}nITge@2jNnm{d7W^`>z5sxct?(saLo(CAWcW_Z`t-ao&06)f zpi8W(An9~?hP~VX7UY=eZv3HD85|FuAj_~8)$0^`^K(Kj%cR4E7(o!NNOpUIi{)+NV zavO`y9rRIDw~Ej7t$&s4CQ*+X>b#F`z>@ZFj(q466+yX<5Fj=zgZ?4cQP;$VN~GIt z;a{(BJsdgc6h@t_WyFQ5s8lWEE)+mo^hdg(3a^#5w8tU*tIZuGFR`jhFiE0ChRN)O zkjo2KBB8IjoaZhq!$*6Fuk4fI1Se3^`FG0MBf}>+r%8t2;l#@_{2?bAW%z6^vt5SA za-v>_&*Q`&WcXrEJS)TRap7lV@FPn2w?O`ZO6nOSVO9{Zw#$3<2G2SfWQ4&$hML~5 zy#*q{3_!W8yPwF=-=#McuZ4!vZMjNG1wIZ)&b5rN@*cC15DG3&XKUC0%TO%WK>I-Rg+PwDKW;ZZgteaBsm3) zEbC!7Ekoewb*}@bUkz(dVodCh^c6$r~wu&L~l42KUZaA-W>7MgU8NX`ZxXt?Yo}`JrnHO3x%ERa;Lce^AG=%em+Z_wzm+PGFEb4Eiacx zr~WtAn|~9WC!2+TlPnA7L`0b_X=R3Jm12#`vO3D_OO&mK4sF&g|ucaRIs5h%%fuX?KJ%;|^Q$4%lM9s-yL#l09&$s$PiOQaFD8mb<~0_Jt%R=yw? zQK9|EYcV)K5%;XQ#9EHkl;j*c62VHOjXGKFmKzn{Zqw%Z#A|KG<*SP29@lCz@mb%x zk>0g=Suh~*cDmMrR-v5ay{B7|lfd|_nc6I_sm;q&#fEVi(LVu(Ook%SiV-t9C&bz!c+~K9vNh2PQ|PHELT*%LX)mV z3EirJF(@wjYWI*BQRWYjzUFB{I{VlvRSMp?jg(T}II`>PNAD-as2IE8DSMag8xISk z+h8)wX_J84??Q!3v|>8PSq-fZoI022qr-kbA3Yr&dyhzUc`+6}wAtuNVyyHJUZ*~J z3l3&mt#W;_-X%7TWueN3=z2=?nb}z4H*r-5tM}P!}XXW`Bm> zuzh$2oOZ@@_%u*9T1yb-Wp1&KDnadB5jYbGedk;)U_NvYR;hE&l=v|5n!ITW z7btWXF3}!$%L=#rQL)yJk+^c-iH|ll94 zdCa9h1#Z2!sQpCVyVV)uv(P)+w3>|Y+vsk1b#oqSG}kp>LufT?(9m6>{SRH5yFZ>A z+Rx?MfZg!wUDtBCUDr`LXdo^5ZxD|g%T#74>f_H>lxH^-MLWmj30E-a3Amh`b!EO}5^f;paUV6kQ(^?9y z06h~cBJeI!;$8I7F3#f#t((D03&^P(xx}DpRT4pnvQBI6$P8Fa;*H3`VV1{20p!|> z@v!>PQ!kc8Z_T>IE^m; z+rxjm@mFge^JZ=H0<1i|zzrR$WNq6mYh5&9vK^o}*(?`Aebo*8Rf zA*NkCM^=+GTE%nBvW*V$9Pw5891$7$G#j>GO;g5>-d1aKULneh$BE0geFB}|%6eCp z@6orGx9VGs4())o{%R^=O&$YDBwiriu5YdA(Au@v#Z$z$qmQK4L9M@=ipuh)(dGLv zw*B$pFl8+tbV=|a+DDP)E!r-)C7edLb|~*PeFeGOU|W+hCd*&8iZf2qydAt-Ns?d^ z`AJ*NegpZ$D6s;LBv*jw9J~N-xQb>nP$vDJq`MJwn6wyX`{X+6y_lUT*Reh@J1c2` z%+6Lujwl@$Eo9xmUi^Z?!A7*&`kATZ4O$LgMpB66P595$2Pn-}@B+%?h3Gy6BC^M# zql5S<`*+P=vP_e_0-BF8Lct$xHZjZi-7LU}%96<#z%Y{0t)k!D<0VgT${&|SE4>&? zAnF>&^!xtLh|TDATL_Inax@Ag)07mFR?MkZD#)qsbgC)9OGGhTG zd-TW9x*j3nK~_bQBBk-A-=UnoMEOKF|Z+MgxDR2O!c!al_@_wJVB2Ib3qnKor-H#Mwfu~Lh{-j+Bd}1m9<3?vfN!C&@PS zx)t<-cB)l751M(Sm)!rA?GU_FJDG#p$)YrAfvLV^59-S}mCmLz<5hYbr6;QNM5G7$ z7(`z{qILA3{-*XHCYe(l#spcGDa(Dd7g+5PjcaM%>(|rYwVUW~cs2f}R|ipO+Taf+ z;jwGCl7>K<)IH3L3Wt zD{NEFE?7O5e-p9Yf7CMftQ5`W$q`1uP6}w0W$UGet$t&y+{RNVc+w7uvbE;1k@_QZ z0f-Bd)>=o*FLpLo9jamZ0`;|TuDE!Wj>Q%OO{fv|zYe=W%z#e}_R*8wi=p{Milg~_ko)RQsI!6fasv-;&epp|yC*G@lrl z<~Vw5pM?!Xg0+ne!J#%V6{>JlBZ8DeS}+fD3r}JNM#!_oT+OPF5|#s4VD-Gf zF#T5W1@)3w zXGHqpAAzvk2hS2*Afg1)phJ{oVV6jhWW&cNoD_6Yv6h}avSKwoZCMefXRoZNqi3HO zAy=}_${Sl&#mn+Mk=1DVnzgvX^OZFDM;WS(DJ<9&!;)9=lTU*6APy zdVlEsL?VeT<9zAFKqu6a&=QQLe8!mm$QQ&lR?_qq3V!6TBvGxeK9|-HdkvYk0npt| zq@>sFMFa72xrQcU`h}6Zk7Xu3jagF^B*>c6sRw6IOu?4SbF8^}E>XS~54R{^jfY2+ zhw<==@;Yl-o-b}jxeLHG`b4Y?eWFMHO5#(?RuAou{TcTsM6ymzqaK<;D*UGgd5GI64fJHub=DqgdSt$-{<_*(B&mY4wtVdU@AahBztY}Rf<2pM*Q(V02YcV)@pDQ;9*S<@JIjpDA|uBt9R4Lr~}N*U`8=$S_|-x!$#v! zK4J{>-^L_Hp_nHE-$|0_SFiyD=%i#({BBNyS1D#iNP$o&qk$6lq!BCWlE+%Y(u#m|VAkZ>k2QH|C?Zqr}~Vv?0FB<67nE5BucmH!OQ z+uyGMLrIo@_@9?2N49<5pz@FX^YZsl`S|<+_?!QE`FpASOH@9|5ZkHz*E7U@R9+5( z|5c)kY*x?*vnozq&aBQJ*8V53^v|Qv@%i(7K2w1no&f^Eo z{^1DKGO()-ACZV-tJf=kNs767JR^Y6KjYQtO4ie9l77kh*iP0?-?E;hXWq&#{9XDl zVzl6tSV_d7y_R!a9I}6bMI;WTqFw&+Ijq$1h6NZ0+vjUk%4LOXD5ZA0chcCF|A@v` ze5yZK#oxkS=`pJjA32<2YtsW%(Vz4I_6fQG3s1sVn;z-kc%%^;X~c2`<9{L7gP@_o zzXr3?Z6bircrK1jCAf4cAOFFx$08g{4&kxz4lv~-ST#s|jQACY0COZS{DKJJIGft# zWiRUqKbGrsFxfZ^5w~2!=xg9?-{}Y-NyY;QhLdbUd?k9IhklG&2nIchP)q7T>_Xy| z0NO~1mE~S+ujH>Kr0Xj~G$}^k1O(F>cFvpFkgo7*C+Mythk3wJyE~zCf)udY4;@ek zk|9L|*FFpWD2(fIsAjN?;5JOL;^{vG<*d5}T-PiVWaU3e~L&+JplT ziU)RSCy9||s9MfV)NjFm^SQ46$iH*H-SU^zf|IFg0>Wty*>@aL1jCaV+XMB&3O|2a zieUbvQqU%zq?FPom|$l8fV$jch2Qv!!Y>XKW~1yvDqPlMZFAiYD6}lMF=WzH#Nh!_ z{54_e^IMaUFQURsw*%ea!m1lDQQ;^GEB^w8i+kA}jqM9J813Eik=rp?ApAV@RYgUk zh!?kx!zv^%v3(X8Wo=>-q)5PTzRCn>WXVT(67cy~)R9Ms8mX{_x7uhgy+JX2=PgKM z_C>`4_>go~lWT6@Q(9Cb+(K@{~^4nx-OrjtR zW1=uRLPv}dJ4YiwezsXX3Cv(U(o}Xeo;(70=a6*Reryk7K9-7l!XtLoMYx|6ZV~eA{~Uffyucc%`xv8PB=^xc z$=wV8r7*ha+Z+6riJJ7*#BbvOkKUf6H-+TiQL;LV>Tl*UZv7rfMJ8J38dIKN6!0tvuoQR(;D|~Q5T?zvpvNCv61dPSCmhA(# zoQ)0a1I{_nn)_s_hxUm|z0(n*4p(q#7VShK<_|#?Rleo4nRu_*EpN!qeP^hD5j#&% zH@)C86e>4&9GsQOvmd>rhB`S~#fNBl;3ZLx$aHLgXUhl2X$B;4uem!TzoH8pDmdr> zNS1F2`eGGKTlOrn5vRv7AK3n)01Y4hhxtpfF^JV538uFHu}=)RkYR=1ftaV_Q}u~- z{A?!|U6k~0UQbK_r%Tvm!k;d)e0oG{_xufvw(evPKK}FY#&bdX=Qe)@p^57Kn1RZZEZFkGy9!O zFIC9y9)xV-ZV>pyBROJI2Cr$N7(d#cO@*3qJo?ah<)Qdiah;ey>}ms}M0?$Gj$2L# z`SsE)*z~6(FdN$F=_%ZHiSnNK*`NYKt{d?x)>L2|bKcE{uUnSRm4&xzuQ|)R^L7PB zlZOC?FzSrLAFU1H7IZ3yaQ7R=n5}Qc4pgBRyM3T`Yi@@2DwHQeC7`CsTggYp=Q#2! zfCvvPT)XNVoV!|eUGSqm_j}>%^oDmXe6PrC&L}kws{T2tf8>rR^l7_r=E~S04n=8tJtzJ5SU*Qf+?r8BCj)A(f@2`m zRC76<>!3&&>{M->Nz!b$d}KDB;C3TZA6m5q-bUmlS)1DavFhiPLq%Y7Wu{8Gtoo^x zQs&1z;$dAklB%Qdk>W4Q6jvh80xiAqF^o@KDE*dPQPT^lPNL^Pc>by$LO{RcPy`ikfd|xvoqiO9E7gx?#`_{W@ zsK$ugrq~s*D|xxjhc+-3W+z%51&uqoz@d&}K!bbO1>M0a{lYv(J?!@c{!1+Y^bRf+ zx2(K<6(aB6*K!ked&ME$|K{BXhKurjmhVAP-eUQ#LTKEoimu>?nqGX|S=QpL-e-As z$k}&-VsV@cL2|sPTdAk1jlxE3E)p@-(!dk`*0$=_gukP$x`RxNJQx5(ylA@ABWJ@4 zMuaj690HGt;HcvpgM8}B}(sf1O~D5{%C`6HG~Z2`W8BTGIqA+rdBcxDnp?UyH@ zbwH=i?UA>Fq4uDHf&>9jj;-x=$e08be>|XptM9=h+wxqET&!Cf3Oo`W$mCXja3|~x z(y+5eqRPZm+Y?6-7wN3-wu_VP7Sh_6(3Bx*T#9&!hhYRA`-DoH3=dOKobE#F8{-g?B}p|NGC7az8Kv#jYF z1de#aJb2RbEQ!3I!35eOt2`h83@S~U=g%BOnm4qanAQd%)?&?|b7f^+ZPneD=PJaB z5TUMx%aeSMSi~f@Ugku$@HY}xiy$BO0I}q;1#W>eHP3MA7K5bV<)x|iH{y|rkI<&* z1B$hU)@;qXPc5Rq(; zoRcM|Pb596#)C}=G>Fj>c}_%Y7%ihXJ=(GswC|�?!_lQ2qD{0=9pRQ#4G3`%g;| zZmb!Kcl=140FEQC5_Rci44ynhn=m{4m!nLdb&h**Ad9K=$D zuoAbt$wQ$z54qb;Y6r0Ud_P1X(f#RYlA+r1sTy2`oVyGD_jGed{5=qRY4Ndim|cXD z=-e>Ulk8DACP$FYfK44g3mN>?_>O+QjOH&ZjCsA2a2(Fh$JjdUY7ctq$ZOxP}U+{wb0OFq&cMYhZ3?# z=HSHC3^_7?j$5~gPa!YAwuMTC*rMf-b^FIekkFMuQS&&-r}DnfWa^ROEmU!BFa52W zDGTSK+lZ0q!y_#QF>?u=Nb+|(tKg)-C_QG?B**g6vTzy5at%d6V|nNMTlLlJK{o=2 z`DUu+Lzr!P`5#hKtd9)0V32oM7cf}d7NZ9?hAz$5yAMd^W_phXjpkI6`~_0$ zm6AAw9#iz5_Rq4KRO)rY9SFe+ecqP!lL*obP;IZQ22C7;KSz!tVxQr~_Kc>Lb*FmX zWBNOfy+qn~)Zd4{j(BBS0T0qU)+`OwMf#qz$P1z=0@0AOf>Z^JBmWY(HjmUyNJh=B z@=Oc9-$$J0u_@@qDqlv^$1ZnU*fULUc0CO|JfYKONv~QwL{YpqOx7q_K3y{S$#bNpBb17E8dJ9sfbUy7-<<)pf&{IdFRK)Y z=B)1{PZ3Q7?bxe}X=;b+(`oxuEnmVXt*Bl(+ox}RO~U8ZBP+e^VeUe_B8=1~JYc2n zaqrz5bqo|^ZT5yK%Fd6Q2&FciPP zM(>Xx_q zl99Jqe@QZ62~Mj;@uP!4f=cEz_+aD6%-&y`9k0VRo3PSV@V=)7+Jg|R4 z3!Z@yyN6uB3dv(&l+20hTXzH2MuL@C-VWs{MZBr`PvI+z+gSvUR4H9s&?l?lORFhB zXkhJbVmhhv)JCfRXp*7~_g;i~$l}HzCz|aX)!Kg!aFjv)O|>^)*^^0sRV(?c_^fU4 zw|@ev$z`P+32=_UN`Xs-oSyPwuYkpsH9}N$z?mW5#7QhzLb9U8D#(Z181o$Y6jw`J zhpQ!ou_x3dr()aOmQyj)J#s2oK%a5F(g?GmJ%Ghy*ft*Uqj?XM7f>LC$u`O7aRJ!Wj6^M(8dcS+b%j=XFRy?QLKPE*Y9=>^PCVr2u2jlYlAy zrMxqN-Fx`UsCwB_&xjrjv28y|0D&)Xr(ns7MI8ogL1%oIsRxkQ9xHHRECR-+c z>~=yKL85f7v#cY(^w#Q|;e?hYkR=p84D*nDf)p2J$F9fh;m}L<9$w*$RsPV*AJn>6 zC$mr-;mEV>27D2HaomW~@vLU}>4<3|=7S(-gRS5)4)QX7?KCNi5Qrn2*F{er$v$(> z{G^T-q|6lkrs%JL=$-HCVAB|mN{_tCdYI{F?ln-@;A3G))}?Qqg{9n`^wyQav}!@H zy*1O#T3u(`aX8mNX%wb`01eni2-X0l?W^&V=Mx9!w?fzJO_bTWiTJR!(>N1`Xtuuf zE$19xat;Z9`qrq^kDG>C36Wc_gZ@=*8*iG`Eg8%1$W35(f#kg`fj$>yv5f>EfY4|~ zvZ3mP<^zKO)qjlYvIHX-Tr`WQg<5j@yPUABQ7#YVrsY?6F8dwfW5A=DmJca>VWF^q z0uf}%%84kgZ>@A|Z^)`ep#-C_7sh4ad!ct~<|_hLf7LQ$D+D6Z-g_v)LYo4uJSWLISz`AT;5wkN=bx86hf2PPlIiwY zUsL)K?vHX?RUWkmM`s%lD=-3$fSvHRoC|WwVLyv3_^)u@gS1(!_~b{TUi(KQsXS@p zM9*BlDqWt(Ikfx)E^iMmUz#r8^JVxa+ytLYi8TDobouTtmw%nhcMmRa4^Q==5$T)6B$jaXkI~h4u6H^LGYde=PuQznJ|w zwbAqCB1ssF_y1+J=7=2kn#bKQxvBk`?P7L6Rq9SvGF~!H?bsL2>Mndvpx=q*FRFeY z*I#(KhWj+-{@L;iT;8^=ydqVEf;trA9}Ud zBi%S?)TDKaXoo*g#&mad!!w2*=zA>r;_6=`nbXs-p4{kwQ{%%C0 zpe53}VMAF3BglTO?%_l)E@nx|FB+d~ir(NOyU)H3R0O9#PJz4C9J`28$uW{O#V&F> z9bwmJ)6B$Z9H^?c&FEXV<#HVf4^KSjJ}ag|#Q^P+bpABSSe2 zl6lbQ89*0ozS=$TxPQ4xyF+~s*S6q$iarP1vphQRM~~#AMYMl_G+)dD@%W;$@Z9!2 zh|3H$p(TBNEnQ_|2^E9fjZ9R5-^>+;N*B22#mzKQ;NTjr5jgL~U@{|zGhi@bm)I)4 zN{gTUBJTsC?CI(ghdpT6&-H{?(j6fvDEdITTAyf+9Q2Y2Ws6Brhs31VRzT%RRP)dC z*R3}cxGA$YJ|;cgggOwxd*~yo!#u(iV~n^DfaW^)9aZ0QCGIZk`=Pb^bYch;^6eW< zqX>}WD(lw9kAIEs{H9aix%q-SZgV=8ym=JYjlit7!&!*>>Vd8op1;Fih^Db;X{-~+ z&_X!NT?BtE^OgCSx)qQ*3;>>@*(-&&0 zcLp-*H6TA+OP7qK)|8TTX?fS^fTMa4{{X88LAWIHI3SIVq!g#zTHr5=v!H1RXWT`H zhZXG3$J+HrAen<7B1u&g{!kw9=p@V;baNe?6<%Cbm%P-9u8=wf-z5L5JLq z6UG_ADoryy!K#c)nF3IQYNgjtlHXB`8I*Akwttt>KGIXbgW2@o*r!@@h#*xtpD^rT zl}j@|2v!Zd)WGcyr6UoeuQ$vd5%~a*OueB}iyTC%kRtYv?ADA%@t*n7>1Ja1(mx&9 z?G5}M;RxEhT65%+VRT#!f+^!yr=)rW8TB(ZvB zO8R?Xqmk^!6;Xb#wZ8T?#Ol%xah>)gr4Y7XOOVJ5R7)@*tYSaJ#&nWzk#xXiGVp@U zf}`F>|IW^#nS=2yvuPk_h?8}F6T?_g; z`HCEz^*o8bhMolSpr7asx4>>40QCfcs_{Vg1*n7q^*VS6U1>9UCxOBa5P>SVCg&la zI11E`q9{*CYy$q`b{oB6-Z0p;>AuZO0~E~zAgc%@Fzjk1kVS(*M$Kkt>|HE$)w|(? zdzXOdJ9VIR|NTE3sE77yd7vW(gWCQTpg!QDUxzbe`r-p5X3|5upFl9K1`q8C0`j#( z8y0h7Xp0a0>tI0R(|y5Q4@@Br*bf~UX(f{<@f0pTKnhp7D+g(#kFHilFsJI0ZjQi& zB&Tr2hiEi5iQs+BJW8X(np{avYq&qQ*FXN06ZfRW{R`J7=MszRm>r~6mNRjDCq*3Z z(6kdF?;tPIjMPlxCFfx{_@EM%=nZEfI;a8K&rUZw-G0ytT;OB^NAyB*##tD2+ozxd zS%j4e|C`=`2)OQtZZ)g>9C}?ZH_#_Xl6ZX&FV>t4_)_w3b}gNtzc7-5HqXRme^_ik zVhg67dE8#@ZTj+kui4}kHxQeHqq7p15y~6j((A*HRyZQsVaJ?!@IrCoXgl(pKk$ej zc&3FT?H}bFC$gO5Rq_VM_-F+|>YPxvjBZMzPq@r|j}yDOMUC2bZVni$PxKw_L|==W zp=#p!6s~LD4^36y>iQ+Nm~l3Ep>QoRkLkK~4A@|P;T0zbnB2M8d`&XBi&9LE?#|=( zRuM~?r`iK=n+1&Np>2Q@tD_=cJG(trVEBmGBgBb#Ex`LTu;`z~ffu!`U;+)$A8jTN zSy_YV56(UYGW!Df$Z`9oq|dH0@4A8NiY4-{(sBTN1Ejs=K_p z^;!xUvo(w{i4JU!^FAfGsFOf57uC&2fubZQU2!*|3m5u@|Bbd2*l7F}E|yeA<71Rk zl8EiVT@>tr`zLmCVcz!P!elfyaACFW!-Y2_3$NtDys^lIVUx$(sL6W%!25#y0s9Sc z3Dc}FKCF>6v{alOML^W1fz+meSb|$rwmr9aF||lzxkHTr-Yzc82JpKBV_^gMNY3E% z%d62|N|bI%YgnQzoHEf?TNE<7-K<)KMRf?JVd*yfatjs|aGi_TQXUCJkemw-3^DBVe{eKP2l>x&gT>EXPi@=K6NainH z9&!Xb0o3JRlD(V6fJC1+A3>iV%p_SlAtg(5lSo*{efB*^eZD1)gvq%%OS7?ktK!>a z`F1!S?Ek=l4&;~*;o9ZUDu^hAY=?F+113CCcZB~B>X4ORmAManPKKW)-;{4Myuky9PVyw z`y}>6fh?WeEAk-$3~rA7cj`%*$No7+OFXwue+u!h3glD8l{jR$nOsj`nsoBJ;bP2o z0+)Kbt$KEp81+&AcJLdzM$&Lw4KD#ff-?zxs%w)g&4ar1Z-G3yk0KO}Zt9pY)&eos z_FVRx;rP0Nu0ME^iq@%e{?4fXS%Mz*KSQQX)W3SMS_ihfNKe8IPq>0_JJJ~3t`C8?wY_eVSDUB8&f7SGpi_1F+th$?Vad|htlm~&c zrWnc}O5+gjs-}qKwokFQrLkEU+v$q; zKPZ1asLl)Ai;(eYaQqT@1osa-Yq$A6pu_xis7^ugn z*Pn7-0Cb|#LbKo+hZQ&nj`I>j5O9SHW=$Fn{qap{w*1%zdnOdZ8m*@dnxr$HsRR_ zMn1`0>}L!{Y~Ljmr7*H@aT()RmeVYRT}$Ni%TO34BQam?`&{M_C^0Q`B|X=FsK8IL3+IXk4{*GlkI|LSH}5!uJc;8dfgN}XdCs#9`FhI z7#-UUdp3rPH)`Q!8#BW5H#+I4LcNBw6ayXVo7997hzvj&4UXRNg}HQ4qIM5S3l%uy z-(rOqOifA7+0YS{_=4C*kY|r7hahz z+`xqgiP_6gcwjxJ?AwBrFze>?gp&!Mgg|tn+Y?1Nj04;fw@rDGr}e+C5TV0Tkm z0>f2VT0mQ%m4y`4eF3I8IvhyEgmhcM`>0xpJ9*wU9@QI4aF5(94VtSc?+v%N#=~y~ zKhnb0UBROoxPN&0xZsB)!V4}ztV-|$Equ$jp>#TNxmWV)2Qh7Y@Pup0Iif#GoE*65 zwi;GYBbDyh0uWx^euErdQ3sZ-`ucS8YZ1{f!eyubH$u>?Sxy8Y1gpCsMDoB95soo@ zsjA3*C$Nplif&Y-aE&F1m9)u|<_Xro{WUyTGwf3Q!Ur{$?n+0pP6zZsjCDB1Iszj| zIkGUqh2qAEt4c;R*~7!rCZPx@b>2ug&Qk8Lh2oaWR+Wt8@3~fy9s%y$(f`6bRnmsn`!9-AR`tfGga+t6L+n_IXK$#;~N*Ku{x!?u3Y{%O(s$ z+aJ`@<*5RT2IroGT&h40bp#_10+{$X3GklWBWeG|kS70z5=jp;ZY)fFA|%?6!SX_H z!o|6jB@lAPe-I4hqzV!G?I*snK6sSFzA0TF_W@CT!auanz|By;CZzm91Mo;#*=4H7 z;ksNR1JrW{Ai9S%d8ul$xjqs9Ptg)pmyR)PpCgc-WCv{OB*hcMI7*ZJ0okuZG5WU{ z&z+byIf+s3dK9^0+LUA#EgO3~XB7;_`_r6NNT`1TMTVlj4j<`@i7&ZF2Kd`4gQ?(R zSfA-JatF>zPIU3MV#eLxubaQ~zqWNt_dR%VOC8}3WP$UxY|jW za#B_Y5cn$WszC@m6XyY9Pm`^c?kRCyd$SEPkFcYX?@Sl9RUnK~g#XaBhW=i}#ng;y zB!Y_l9)G}_C}agc$W+!vmniijg3nR&W0=ZTK%*Eot8p38J(-AI@nH+siVFAuF8~KR z2}c|rSf#zB)M0UA!^i2jY1eYMMxjx8yY*?E6e3}t{b2@}fD@NlCCa*tmjQ$BU8e9I zMB~8LySuCt8jjmqJ&GE`in0IxL53smD1N16$wZtX!x?m71y?}np+=aUbm<19#AQH% zC~`-Oh-o`wPm)0jO#x96FT9sX5N9yPA|#bq%nE!Qb=q#7_aW++FjrvI#=b|D(TVyONb<4CxlN_uZ+((dN>)<@lHGM4#4iem zuO&XuCNURgGxAc(Q-vR=!dp{?8S>W`{uLEofx>BpGKidXJay6^OK-~47?GQZ=~N`C3E*zT zl8c6PF%kPzl{Gq|!)aw=&a77#Q=uAn{B7_<&>QzSpf2=zmU`d+D@@jxuU1(GFH?Gi z+aKo7)jDzl2iDX)vhZB{WJ86y5)=2VZl;qaPO0_k@ zWJ1cFSV>zWSmrP)=?azfO)6Aw*<;BaA7jL;c!m9D)l?C|-Sywhu4rSme^4)L{**{u z7!4(iy9RcOR0S7p8SLbpDpY^`od46EqS!%_%Id-q(I0!C7X5WiOSSNL} zVL#E4(jfPNvh3bWqRKi#nYxcJeZHS$bO1<5o#mpEA=o*A2@1p3$_WI2n%kPj`)@x# zp5cg2|V$@2qr_K1>UE&e&O$iSyqG~wpLk0VQtGjQGYjK zCw3zSgbu*Rq#_t_E5BbwGuR{*=qGwQPr1*yPx>O(>`(LCE@)=ou`dcIxj6%2=!@d!V56nCR*8?!P1B=UhC*Ovv z4-YKfORdl~&S%sfV;BoVd--Vgi}a>Xe=T0V_z2Z}m1`bdY^a(?lQoYG)WohC*W9UU zzQOw#1;Z^0B>Xt+!&R&hJ-!V50*KazP-#2t$tcXj>50(0%4>+e>dc# zbVVqpW_a!UUqE+Q+(rnpCWmNzwFf!tBx5Mb9eXQcpMDAFwlY@mTU%#9oisnvlDP5Y zz60!V*Gk*57H7z699-;{6|G@k{!rxXW!${6xQTJo7wJFaTB`RToY$eIMg;=LYPy}6 z_wtT-#ZUyP+HWRn_kT@o_^=Tpdk6q1d*t)R`iqM7pkd+2J3CM%eU84&*MqP&r8ry_(7w^GP>FCiZHc(hoBvnlSP zy2GK@Re;+{}z25V{ll3rvrp^6u`Y0%y@ZSW|S+Sg+fN z0(o#(n`^jaAz=2dDn(#zpS))Ad$0WN$_v`#@L(5g!pcRQY2M)_@5X+DqI`^HyKcRV zw1UL@n9!PnHqn&Pmv3}GaLGdWdU{vQItAWUqTopdFTcEd$=_6wov{BB?VsQ(yA_o@ zHXP5!4x+3JZ-LqydzkGGu=nkg_7{TX^_kuJ4pO;uB9Tw91!y1^G<1Zeh&~JMsqP8> z#z=ogUZ1`?ll$8;0l#I}pONqH)K?GZUPE!qiX6;1`Yr|ono|4I(w8g7m=Ra0@ej&I z?EmBy(9*zG^8N1WVZbvyC^%DGJOZr7UbvS1|6U5_sOUPfTMvvuU^6%o|Mo#%q`Et< zlY~`gM-t`Ucz3?hqMH;6N6|FX=i^L2>9pqnW_v%DVmr2OdJqD4J1$Eux)Xuuc+D$X zq(6EC&>9=TL$O2tdLtjdSW@~wuD<4nXfZwabgULiWAJUrKv;3C=r2rmY0f0($60h- z7e7&mn@bL~e}Z^w{f}=QiDc{klYE1%;m_Smix6t*tVy)R(a8%{fAqJ^MQ{w+L)OC> z0&1Y{f%cE7cJTpO>4K+c25$AMA!4oWH1F!f0i8}+(J2F+_-45}0~hkf70aWxPsIuI zLrwdPz83LkBOb5g0avHIlq-V(;E2Bz(^E*wSA(>{FTZSQGZ&gKU|EtS`V(-02`7wjSKD9>sp~7 z5PBizfW`jyPZ^8-aw=(@6gY%4i4FnpvxcCt`G=`h-(kJ(JILj=uon2^ukX^=LjG*T zV;+33t?r~7bo56j(e^D?F2|vm31`ivbcZ`Nkl zQWEor55VX->8!axy<4+RCfhxz;lhLVgZ3P1x7jMu%>IY;)t`bZn9U+K2E7+;IHwQp zJ->y~-V(@8(mmze~&E%{VUAt2>2I>a?_K~_%QjV^GR0u6 zy+L`(0K*24!@lfvver=ePv?KR@Z*%H3g1equ9hskb~SyN3peaqh760?3f2r1eiA*f zJ5E!O>$xx+ja(Q;CT(CgS@qoH&<_%0GvGh#i58J~AW4-viosP5Q}>5diH!#t@VAWg zw~weRXvYffALvvzb?SO_YG{0+ioXZbmxaY34k!!6{c&NNzNV2ofP)?dF#GWvvXKum zWMw68xRG@Di%zXzBfHGD3LYi19*DBX13ZowPQAMs`}}TezWer}@|)Zjbe@NHiE!H$ z9b@CeID8Un!BddNyL)HB$}{MP)#y%#!c3fPnm!&v7Qd+^j9vi8Z#tpbdBs{A?iZP@ zvGM}Vr5E?LK+(a?KBc9iw0J;^31So}H6mpn3_5?D9C$AeoJQ>;u8-W=1vpAb$NvWp z8AnC%3j+uc-pHmWhI}PLT+plQlS5ucLoQCmZ>GkJZ9$v`Llp>GI_<=6hWkJ!W)$PC zNRGF%I3G)cHj1Gc5r%bZIcStb-%E932 z`5`#t;jP1zVC21^O+p6A3yca%hO?s2uKE{;V;TXkY107A=pYoXzKK^I2GAA%0S&I^ zW?;HcLtI;#=V;r}R{Xy7tcccp^uW;Z;m{@y#g@17;Mg6OS^>E32zaIwX63E63vJFa z+Hgh|!*f=a;`E-VERD?^K(}7^mn2#V0flh+_2Hy879~!Q)7=kAHXNTjr2SLxqvG+$ zNM`^HI%WqMfe86btYySTm-pKL4#&z3JopZc4$?t*bX9Lk<9uM6u#RzH`UJ4t?W|xw zAcn}k85{8NV@TDcSe`Ody|Si2U-MI-65&oy5gJou)4Lp2N-tseCQ>J`B~!3&C}v-R zXiwyP29gHzi;q#mgkko5+a>+k0oJWNl zs4$Mghi^jAuM$!WnZ1N1l&9nl?fBawRruk5UikM^cs>fJ^v4vxE5LZ+(F1WKeAC4- z+Z!-MqIY)cu*PK9Kwnb>;)4+OlW$}=3NAPHC-ZRYgu`BiJnU4fZ4u6?qMY5y98jLa zUPw7u+^P_Gjl;efSuE&>Peb6Rn4*3p!g+&0s04IX{44}iEfuMq+BHo6Ub8yS500Wt zP;ltFEr1A~Mu!H$fH&hjmBdf^(e2K?0F{fAw-d_ zs?zJQ72sIqZY1or+v%MO5#sh-<0AcIiT)@w22$5C0L6Zc_n8Fu5u0lOBRbJnuY8_* zEzXk9QwLxG3r=8*3*se2c?2kaMFvh8bJ6fTm)tNH`Ic`3{wDC7wbp~flK5DanQ_|} z;R^~&W*DDK?i7B-R`o8Qfz{;54U8s!!$JQXE|pqe%^8lV35y1U`pppU9)EhhVL~7OUvv-P{wO;D;z46_C%6f+$r+VJVn(HTY?yAn zH;Ux0M{;#*JC_kWC~M}ZWx^sn&`o7OmHfM<>V%i#6oJ<=9M)_E(9i^!$H#~eVSL$$ z+`X|4@Fknahv}<>NGQX11-X|8!yvk~CjkcRun>7*Vl4X!N2(YFAsA%dIaki#F{R3)sRvyRJ1Qf zDQh+mH~O3-FptIa1m8RkmFsb=CBb!5jn+}<3NeEyU#d+F8+tS}1vLnW@Vu{TrhZ!b_;fksAC8Jc|+N^L3npkrgn#gS$7*lHfN$#ec zyaER<^%sta$t&ar8h73S>p@K~J0SS2FpnWZpQ2bC+96zyGPSQL3~3JCDh5(jO;B~@ z_*fn>m{I{cYQKQ^gHV$QO++Q!IY&+`#(x?GB2<7+(a>c4rGJu(#&%;S)5DF8qI%C0 zGq+Zr13OY_6Ms3EQ_vFE|~y6%Z8fSNW7x4v+fS?z#lQVGK|sf*YD zl~=~;130@9gd)|?uW~sRs4)WYKuYH;c2A-u_ehd>c%EY~5y8L0+*IxGGFi9&2go|$ z$RNQ+n{G{b2RY{}hW_aDV7Y@KDm=y5!U@ep-*H-3KF>gvUPG%$ZlIaBd|vYvUd{Sb zyUkZ-BMXj?Xx$0DxK%KI?VHgU;V~b~?MqPXEAdseH&~4t%XL_GvJB9RcM;Z5#CA~y zI`!I#P5?#39pG=b3Nbm-%gv3yL7x3XG;4V>EnjXv zV?uwFj2JWF}U8x#}hUD4A)F}YWI?-_EI$|V}s~fO22B0t730bv8h}R z{<>9MGHwD7@)bh2Rq%pR1H{>86gSQGYoBSm#k;XDKphq@3j2fo7@^{b;6us&k$uLJ zm2?a*9EzejepY(9Bx^p4nphAP&nq_}y)&6~$o~rOziUnnl=m z7F8p?ekH)B*(U;SS%AhC5zX>XVc?snyi-0;^+e?&)t;!lC%KSozAK-nr7bFFN{f~@ z>+f*DpzW*i>wMrp-(tkmVB$|vvScPB!SKjg5Miu%l@ushDCQL=wK%KTOFDGP?K47q z8v!<<`*(>F9JaxU+G`jJ9Vy5Bk+G!LQTzkhOOvR8UUw0`4d_2=*~iYOF>!lG|Hw)n zq;-<5G9xd=v7JzpXhw%goDlc{JsSZKEUii4Nj4Xh0!l0c#<&NPyC2aoN?{=`L;3M> zfW(5dt{ho|pp8xwBTx=L}mp zwxHQcBx*n+K@-4jBG@Jx5Gg1mP&3sk$s|sO&gF6uyV9k*rS;d2}fVOt`ee?Nb?m6e4KhJrd=RD^*&pG!wUq^34 zk99{IY`~2PVjiz;kfA!=`h<9Raja7?x|(=2jR zGF{IY4|rnvuGNi|cd~zq!JBF^5>6@%`Sv6@E)3lx23>Uk8?_{a_TjTURHO5YI$TAt%l<}O zQTjVz>7=TV>E4K~c>RG?Up2ii*Q20OUG~lxJkfZkuc5&AVS@4K9DIxh%Pf7D#>O={ zCX{|q#1PaabX|BTfrEvYACpw*dpY~g^MyjXTH007TR=M+XdDUaJ2uH^>`X^e3Zluu zlh>F_1{Tmfj~p%{32;E^7=txw8vBN)SUW<$y%<^5`8w)oOy{k#W?(;# z^eL<^hCP-U&6?jZO^KT&z(VM)PoWzJ&R&@_AUPFpRWWA(IW2oA`bz^*OB{|~##=1q zhc~fTIFv8eBU~d*Osf$E#MtG2z&2nW4Z6AvOIdRdMO31Nz zla-KT_b}03MV4ZKKl9%ZG;*__nqh9{IecY`Bx9Zbn=EMXh~xFP%mU-(#Tz)i*XdIo!V63Q1?>{ z<WPvY^6zcMs(HPeLiNNQPhR=IC$9=JCCCPSw-aYR1Q$c zDy@@FPl73}KB&V^+h~Oo`-UMf2ot@n6ZS1m#}ne!37%!!Uyc*OTriWqA@YduKTYjX4Mg!i} z%^zc9EQ4g{>BB#bG1z>FYC&N<#_q8W`P2{&8=gOfKdr6{YAvjO`$aDGAggmAu=c0e_UrO=OytG@b&W#L=Q}+tnSUL>y;ZkvGFX` zK$dl$Kx@hpFFX66C~GHmMxlTgB7=6X3pnO8Sn+Isp9CFjsM&QliGEPDXH*wNm- z(F2-;^_-ugy?oCRm6Km&3tX~5-V?$p$QRm)YflZ#^wNe=x0L596-RgC(+#v;fFAOI zWp5hh+x`bEMS%7>V=2Im5^2U`mOl_IQQVDEVp#;Ww)|0~`^1)*P<;~)TS~IJ+!XrT zvXrrbp%d~w=he=Gg5S)7y@seaa~$Jkida&hmUf1q5-PUC-v1G)maBx@S`FvgMaX70 zWj9qF!^P}DPK1_}hTypyA7+FPj^98qzi-obn)F`gps1v~S?~Vyq}+>}p?Y`z9SK`l zr@+SnlW9REV#R2Yx!tiP%Abl~`qGaFY(c*VZ2ILkN$<(ml+kZMeAkLhQwR3m70VJu zk-45L7F~?uJUf?bZJFVFaiQ`xa(u6wMo(oq$N0fvI`|0rIFz`a$LUmArJEQy$|-w+ z#t(QCb=^q83x%u@=No?j zP$f$z=i#xR;iP9wR1$HDPyrV%l2Dum4kE*i7w%aCJkq)rWh<;f`!UkFbJ!z^$qLQi z12|)3vnS?p5OXiX$=)_yG!o5!8|U{8)SFZme#iz_bJmCGE?&b_3U%AXE+LQ9a}_Nj>V9F}viGvbfSIX~3xZbm968$*nTolu#R zO;0x-?&!i2L}d$z5&*s5Rf9Z|vE`o2NCe#o=amzZ%;3eFy$F`iAup_j0k zHgttkg%QEdn;m%4H9~fNS=Fs_=Iko3=2ThL zff)fP4ret@7)My85v=fqH=)c-vR47%2iqP{Ny`$~wKGYeLVRH=_5o|+joAa_d{GIV z_*n~LT&sjnLvhr!*E&N7-srjZnd{^;TKh1rwGrD!hcJ3ov+mhx<~94eL)agt!q9VV zQ(gxleFn>*1_r|4uD$mkrrdwO=X9;tH6w50^h)cV>DRUT$@rdY+BI+iK!>K22Z$d7 zq`)aaD!x896BKkRw{KHt`J0MXauYRYS5^%khw3lC%P*53Q@^l>vQ z2VoTz?0g?@|3ni!%IPmhL0`}H+6yTNpnwJll5LoV3QW1UunMVexUIVm-UuAq5gCHB z=8o10=R0xU-~YF&=pec=uAebjoE~cRkGUN1Jw5qaoJEIc<2+ozfz6I099F0G})1mR5b3uL|Ez z4{iHwh24V0!ng#Sh z>NXd=}u~J-0G%C;Y_+`7uV31dlWL0|W(*kpc$} zgl!uXti+u!Uk*`KgZulC7!AJQx$IW$g&Y*dSC+memr$)6RKo^ySlQ@dr-M@6;c{#Z7zROAg=U=#R*E1&`pKfDZkURNfZwNLpqS zF4Tep^b(`^J@c)>r!DFJ*3F+-(*4J07)qh=aQ%S7WAGuWf7fU)T;LX}Sf?ng39kY> z3i9%O(5CY-3Np`R@5cu?=rFEnGXoRZis(7gis(7giqc!2VJolx9`mN>J#%v*o0mye zGRq|UEvBgn=RROB^o*VPg{x#Pk7fQhW`4lVyz0v{|2s4Pm7O{FDw*Gn)%*!FcVQ1g zVBYrSnY)Nm&OXy$WF(7=+Mz)5_iD?mDX@o#R(M9W2$Z4*uWJqz^50N+Y z3U-dJn9p!b89frq-9pT#*3=Wi)B{&t)B+%nMCq|60TW}6I#gZ<9xhX^@N+_lsrgVK z6n}o0uGe96naU47meQfKV84ptgVB??`L_Gp*nCOz@p`l=GX^=5So;^pi+xr3}h zP-?PmYjH*I+AIJi8uy@sp@Xl1ZOTGl3o%iv<7AFQTX_LgB@OL7Aq{1Hc|$+3 z8ydnopFJAi!gl!efxQklF}q+9#AeAmGtowOZ6j$aTNg`5U_nIK&81x`%|{@tPU&jeS)z+RgF`@rNztR@pW$uH)b)tEHkUym#)`r+T9KPI-I z{e0oWrQ#dbsT}-%z#VczkazMBVpM&sBRu{59rSU9t@&$_L9kKzoV6p;jFixp{n)MP zt*o#;9e|ZEHYO{HG+B+5$x0$kmciOISxKbHN+L~G7@3@|%1IVq)5!Qum#@v}v!9wQ zblrRkixf4l98)2uxp@ymvR&g60W<=@#pyF@|GqZzo=sn^?myA2xha>}iQDG+SFq}p zSl!Q)Vw;H4CO=DHGX~~^=?LM}KhAbbAO)*Y3E)_Jkpwbe*ONdx3}X@iVP;BT3=AC- z7!3;*0!{t``~o`Op@kt&V$HxTjqmM=9{7P(D_M3x_%KSq8os}xf0fT(*|#Pfa=Ef^ zpJNv$zHel%xW1{Lpl^ixYEZt3P0BBUGRj}FUl+yy)!_S^tHSr)e(-TB`YP}Z{a=Ic zM-WF>;_o+m`{K{}72#Wq8TNk%e<#0vHTb^X4?f|s81Mc``nJmK_Jv&d73e$ps_;F( zr!W41zOO{zv0nwgOXxk9$mW_1Z)@rCPEtrI$zU<`WhxJ&T`T}QP7el#SWB`xH^rx`}T;9%` zeI;W0)1yf{b%{U)L>8A}GBb4@>OF`uqwb3KKx!T?{*OFgR|=6^Cf~G-koFL@j*%#! zWD1d@ED+zY?c++G_#z9Gc4X$g!ig01uq!;shpqq;bmbk&Lac#9KUI+awNaRE6sH+g zSf#wJk1(n>>USB%4LUqBG#bSj`rz?}%^sJpae=gGE`1WG`dGKQ^g}4@tk+!n9j2*C z`e|yD|IkWdUW110huBB($<>wcfOIkgy+b)hxEz2h?xrK9mHrv!DQ8$dh$-_gDNi}T z^0j|qd5%+-pYWHJAG?i(Io}KLwxQ8_qW?2Qb<_`Qzx>hXP@?edN#(U*L-<|1NpA@! z>di1hK;MT~j0@tgNbF0~VTvhU4}b3O7deu(_p{(-U|nYMI>#C9{Yr-mK5OTH_WV@b zm(_!pOB|_s)vNP+moJ0Yp5A1~c{A$!PL7bBwz*Us;iV!g?LJF}f4Q~^?@`v_FU5BFw=$vKTmSNnfsS#FKL1U&?QZYneZ``)m1m=O6f~{O|DjR1K2Q`)g3}vc zce3U`DV#pNuX+%b&odt8F(G`cPMI^BSz&+jIH^+M67OKTei5rb#5$Al&L016HU8Bx zA=o2aN@U8}-rk=~oP`@%PS-#ebNW8Wz4BG`ET!lt4};6J_wlKMGuWL(_H-*pNwj)` zD1#jzSg3ScnAfHp5~K&x25a>tgB{Gk?mv?YN(7L=)Wm4&w^S<7S28#$nhHmJ%$tNB zDmVC^e+*~DHSp`Wa4;^sAs467ipcnY}X71OQ_|N5f-iZz?Ydmchq0bnwcfGcOt~|7 z3WLWzS5Nr>H_44ETn9JUX39{c&ee-PNYCsEeu7Zt2f3pP*9SWhEcl=dmnQhSb3Om+ zYs|NJ5|ob0U-U2O8w`A;>$^~a|(4umO(#XA=6kt^;RyRDzR!8L{T zm4oqx%-|$X7q8(&ykvZb<1C=NmC&W#g&Wpfo{xpkIAlFLe2o}S;G($mk^d|0y*1fx zFWGJnlhsw)ryjRElRA$lC*b9An zy5oXb@JJ%IHs)_*Ry{u#2Ve@Gk54I!mov7!fY)F)iF&7x(2I}bdrOdL(Y>a7aj-Kn zPHjjV3i=`2J&wq6rT%R-&Tobf&2-9{96P0 zNx1gXEO<_(&I;sD1kAV_69TbS#ndNB;}e*NUj+Y0Zr2#XQG6f9hiO# zsALu_R^59Xcu2x`Fr?3;D(SW_rq2=5hx}%D@uceF$BI5DgecS5TXNu0_AFaq&kf9U zm?d{g7z~wYmJF9LI4Q}2OK`|^4=U)>9iN&7KUAQAP`5xT7CfV(pb&rsaUWK3(B?MM z1}XRa0h;=h{ezM1W&7<031KmfrCr+6OKAs5I!d1;}Sk0;g2N@uLgJ>Qd6*wM~u$SSNet~W=TKhf&OgW6e|4)F{peZaD>iD4k ziIIg9DM#i?Q*D@bNzWtfjQZ=O_#8C%{;GdetX<6zlGC8l-5+|u=zX;LP5Vc3S%(k zAI!?(PAqAVZNT;SGFu1&216tX>jrJ}%ZW^c6k7Ij^8d+&!Z571sTTl@stPTu8~01R z3pjk1f*zYMtSht$4<-WmYdwDmVYobt;QR_o!}r-JP7rU8xjqX`?#{#z!8{T&)hem} zM!ocSCVKJSxa;xpq?uJc9zL#Kq^b3(GnZMD_Ihi#3b5=t+G485?VS&2YNI$?#gcFzNY+C@25%7(_04L)v0JNOEYRcP5(@awy2S#)~kBNo8-d+51DDR*I;15ap z7Y-SDxC)s!?Lw8VV<~jRIRevbf8-whW)!)YE`Z;g;(K}&-*H>`z1DP(AaZ%%t|0e6 z;f5>;2D`lDy@fk9IdB&9ycU}eEqpiSbvXe=AAkI$SdQyAqy+3E^#gGTp%4Dge1rI( z2K>+HgMTuF1(jRBpz!~DSpJi$+z)zwjUz=^Fas-C;d_2+QzI%rqW7BsYxw@85u0r* zPGRw(*Td1V6B>?uOapA>;;h?gB;ZCRFus z5*JrL4l8Z0(;lUy1;mpY?hSSigri4X8VB|okW|>VY`Lnx6#V9VlxTb@4UfQwjXCv4s?6-lm0Z--a{kl(Ta{!N}5xf*I;f*@&9t+GZC>Mnk zjGx)OtZtxGQ3}V$H`nI15P=v7qkv!aCg6ND$>ZuRY}EYU5=%i&{6fsqUu^wfjZgU= zkNnX>{#a)7M?7cX7FER=U&tRH$v%ZvcW*!bXakm_{BbbK9}`C_{ur!SV%hNU7=#p8 zMfsv**>J5MIOxc1viL%ZfiIqbKT}w^^!=lt7Up=tP8Mh2iyv}^Ya)kDNw&oqNpIn@ zShFD8;tU6)G43y&DW4(qw@BGT&fvJFCnXxg4b{7 zaG_s|=KqP%Z}ipa=Zny#7!2ZAgVM|m>pRWv^3fcHOp}w|2YE__f-H>D8)u~k{lBQZ zGTU>9Lne(vml8R@vMcB_-=(2$GfU=bY$mo43AX9JLxDYv2JWp+Ur#daA88gU zt^H76B+V#H6F@zwJo;)>@$+B-lv;lr3UT`GK*=zdZa$?F+SK;PzBirmuz0YMeHF~_m4iDRT@!p4l09dG-T2;}7)m5?p`H`jff&#n63q5TtEH~s6&8tlMbRIp+5 zkbvj3v>DSsuBJ&Q3NTK$cVJ&w=OE>^(Fp3dOs z*RZF#P-OP>$3Bh+xo~>S#b@9C!6JqJ{h9Ow4N-%`9VNkD&{5$>l4|ym`92~#Z+fo77Ncf4$};0Sv3pKl3>_K?9x+Q z!ar=+bJ}MeI*;}D+uYv}bsp-%Ip4;!xE=+k&3K4$Y=f+pjN)_VTf;Ii(f)YY|I^ps zqq*7vw)MAb`5y&t#yxj8O}T$!?%l$w$2suMnfkDiQbdhEbEOlSckM+lN_m}c)r8>| z(g{2LTV8LXeg>bS<=%Y(=ZQS~?ZTMtP^4&i#s;otT{=a|pJZgs~;eJ`@_3ykU6k~_f~P`G{ITvHAEER!mV z2ln8MnjZKzjO}J138&5Uzzhk0Tf*O!@UW9ie@wzYC`fwXaS4AQ;qR$1OgB`XKQjCx!bZ)g zTky+ILaxI+2dpIYLjCg$q>&gSQaw89uuR=YgHaay!+2G!U ztn9L5ppmiiZ7asxij9@sRxI!}#@@4HtN)6zb5?BLEsSlnV%;MdyJW>&f5%vZ6-&K? zu{OJ07Go_|Y~!7b9kgQk*@)HbWlX#T)Bx`I@dftIQhmZSGFK~~kcOWrsdKg2&1bdh zAR{UGc_=r>XDqe+M;%pDxWnDq2nxn zY_7JTk?*pi@8Ewv`mUlB6)!kASMxGZ{>bQPu90!M7VPA^jOe@c_;+wOU9q|jCnoSb zGFLl+7ArdEYL`RW$n`HHSfD_OOay%?)T6ZoI`9q zPnIJq8oz8cei{8av5>`3;bl~O!2;ki0Js38EIyuu09s%CF#-f(K0sL9fym;MOxcf= z7Ca9C=#S6=G&Bo{s%SzS9jQP=3y%SS56A%c2l6U*BMq4Fl0Oz)^nX|h7AT)O2R{#& zF&nvukxBS@G#4ockb+K@KMHD=m!~5ojFjKw{~O_9NScab+V5>c82+~}1J3V#i0~nV$vNL^N8}SkfaUM~0dU+nSKEie`&i39*0*me%=%fP z3031oHD6ToMfKFO@QFV27v`VZ$U2M}dyu%FYQ1b`4YE9^W{Ld<9}ZW!&T19TJGEr@ z4O*tSSXB;V&mTg%`%a=|qu!Ib3$fugk%8PcAlF+8N>w0GA>~ve*|)6&|3RdKg)0g- zB7#6TjDIlSq2HpaG>ygABJ?*1Jh2-2BFKg;-q)Xnh{uc3(-`4L3wU`JFaKz!O+k9j z2*klvZ6I44`5vs&MwWYm4aq1BAcjE26U{0mOh6BTVHuKEA2pqCsEf?WJtYQhBjovpa=samFH14 zn7X}D8yWZo+J=a0(?-I#{R})a3(@=2986v|Pn3o5YGmLJC|JyP2PLpL(-HE^((nS*e^6K{`>@5u-f((+#h*x}S&ei61qr^t51P0*c z8dc&luvT#xakRU*V;~|6QEKrCgdPtOT*NB;JP?hRDa0bbmB3le>%0NQHmYhCpG1Mn z0V{HZrNI(H(g>)Dk}$1{8%Y#QL<7gzl$?~e+I<}8_gV>uLGyNswVK`1tq7$BM(EH%pw@G>kp<9x)c9B4 zR>Z2iO<&aoO9juqXywk~W{$2`y=g; zKKS`MIeXy5h&|Ho50ZglR(C4 zgn=OTt9;4LmyA-PdD6|uHoJ*QQ(3ZL0OOFgW!-!`^Mk-?qC5AvnDU#YibFaBpFg6?W2WiiW7D8TlEdkPo zK6&N43e<(Eq5^S6rGUaTD8@V$Y=g6aSA13?LFSVq2yhnjY{Xk2uY$rw~&x4ST;fQh)1SzxjG`>H882E1oUUh1l^OAuKYZl;apk{&)1~?*> zcvgr9Ow?hn7MQ(ue2wbEA>ML|PeV3j8nHhKv=QS)!Uk8yF&t zS+uenZ+4@&6jfN!My~D!QnbucOkky$q43NsT?-UY-SrZg9D^Yy2`#Mjjfir_KK%r< z*?I&;Y9t){C!nVR{XF976%F5#AoFWVwK#E58~KWSUXuBmg%=F^%U1X@N>TZ^41Qny zG3Jjl(DsDQA%N<#g*2NamqD@$Nmtb`mU)R>YbvZB-o!zR-cxl6d{bbF02}18#V4-C z&mUd*`IJ9LlJL`tP#7JEkpClAEvHG~%WD+CGO=A2C!NU836&F@jF1Sj$^2dcbd<4) z<9J;m{`V1Kj~++YyjDWRYx4v+L1*M+8?RPs#ZlB@hf!)41VQx=Fo>T%p2I=^^g$dnf0;4L2*hwp6Jz&SF{fd_BeA?3<@3ZrGoXf8pp>sJ*u~5r zIgK@(XOO@N3vq@Zv-oC}5^NHmzsDAV)hT>^0I$`2Wyh7ki^ZBzKVpV>rU264y;sOY zrd@o5BogYJCyBV|SiGMk0(Z-x4?!ynZBWFH<6a7oP!}+&7#cB=6=e|m72=5&uSnF8 zHMS+f39W3EnjR>)Wk+kqaaEOJO~p7)G%1atuJZ`|4YFdqkb-S{@qYwijK2zM<+2+i!6`8PxR{5t)CB z1=Wjan+qx=QS!=o6pf^Uh7RcEKo3JSHH1FWMtU}CGd!5JIFtlFYoxD66bKG+9UOs7 zv;W&6qq(k{hdNFKejz=rSowx}ehTT1#fUAJ)zs6?<&>2X{iIFAD<01wf<)?Lz}m~1 z3a&`i;wiQ~fdN5{T^AU_ipa_hqnx!#EnJ;lh8DK?=s-*kAgz!!g4a^rJ_x+0+gye? z5JMfvblDPFGS^)eSLrCu)!F0VuEUW1?Lclt&HK`~2oTH}GES1p@+h{j0yGgW%p>R| z+EiC2sHWJm3|mAYydtmcR`^1laVxEJE<|Z5TD%vbFsLg831QBnbOvEC5KzOnD2Oav zAS`qaK|+AmDua6na(ravV5GttSwh>8Wg>{y$MF}fFl%aUBjr{6x~%X1Ky4%^Zhe*o z>4Tlur&TIB_+&T5B3ka)q5-37#q#WDzX}VteHq#+mxxgw< zS%Du$z?@}Zx(dvj^HIaBHiW@=v$5|E43ww95d~YwNJZLFCgkI1^f<(zE0;lVmE!|3 zse3fDfR^Q>1Na$(2&Vt&LJ4JOarF!_G8?75#T%i9gL%{tVN3}%1eD<9J8Nd6p)R^m z0&q4{%Rp1BB{iKcgeKT!7a5x>E6!cvqVL0xr6Ki*jJ8=n53! zHl)#RR1vGxnh(UX#X%j$KehAd+DOcO82042*dk4dQ4pV?sm0VGj7$*zAT(^OjaHHU zAt-*O;kqRZTv;21EuoHirq8;9^Cv}TC7u=56ct{h`eIL6VQVE#v!AR(!fO;l#A+$2 zmX05OO>xm7$O*5#2Cz(6VQVda=pdlnr1Yahhpjmb;;HXk19q!Km)bE&DjV1r%sFaZ zgxmrPSCXchv~8?8f2}DC^6(UKF>0kBN++v zKs7PDMwdnyth2!A)%P>IX!)?ZM1z!WRw`xLd?>ZmMU-V+3rWL8Oh=3_?ui8lWqnOEpcdRj{zhVGGMhKAQRa^8>E3+(kx%w8*&+9_t1jtO7i zcT*M6I~6NIqK}~CSJ?)1)|9752%;u-4!~qSMIX2WNUvR=JiudzR!bU{3>o_ z&0||Ah4NsRsi}~lpMn-KuZnF{u@_Zrt&06Z#a1(h^Cj4}ao&L+H&__^NtgzJYp=Cy zM4P6iPOmlm>?(4mB?0*m$ZZfkN+=tCcAk~+mAx*LTi(>PBC}x|%;gm+528@;mzo4Q3^VachyLha0fDBu59Z;+9t&XZP0KkidQ2MC8@KvVFvbE z%Vf^R?1r)vQmK_mk;;$QWsy+Do?yQAdJcOAh!L&Rz2;O`E7Bl120f%#VR!) zv9Z(0SjjZYY81A#>+tJ@8kJbu&>=v22&%2@q=aA3mzRg2v&d#j*fJCy!o(Ez&r>hk zko$EtB~lltgr?XI*;rwca{xEEUMzOqcz2OFc~;5^K7?FcU54`3q6p^a!`NAR0vk_H zUsTXqa~MP^{uRlGbnxPSgBf$GOEg+l4)zm&f$`yk-n(90W5bEyG=RmB6Jr=>ddj zbTB6kMTl;q%t_l3B88s9ecF?f5t$>AAu3WPk?T~XL?Uh#nJJNLRisEFgH>cYBBpa2 zztd5-Dm)b&$Tv@YI)LAtVE@Nla+lL|PvHqGZF6xdL_)bgEPm-dUN8)5fra&=VUTaLfmjRe z^3KA0iM)eMDLW8Fyu7zCA1!O4Ufx-_Um#_n-GyY0c8*MbwJQ zONJ5_5U9L}iVH^;!b_wkNU$>OJ(L&SfHxL36nucqB8R|}S=_9MB3x74jB8fu+? z7)0Sp33WY*y1Z3*xd2MLw<>^C#uiEp0gA*5Ci9enZTg=ra}Pjdg^)E1xwJy1vO}_F zoPaA^R6vP%qT7(i;kLqIOIQ`VGGw`Yj&c+FYND@e1|Z&!qzV4 zAu=16q+v^yI5S<)=_qa)@ z-{b%YdBP!L?YUJPL+0b0gv8p^ZxRB++5u*T7-`Wq7*-v{uoJ*23Nq?nT+48YE$foV zDhfIUS)7ebP9PjjLVF*&fD!hC%&BH#z*dHi(BwJ`!@7FTutcbvSXEf8js&PRlAuOK zG=Z6i;@x~mPBjdw3nZ^>rxe`4Vk$U17EDHP-epo@BLWy2G%3w$GS;ZUTRll?fNH!( zjr6z#B^u%qlpIkB^A8)ArczxZRkWiDC9&fYl%$DE;0%d=pa@)^_%6CN|3RGBtZn4% zD_XYoeN}CQUMcPKP|5ff0`_+2GEB;Nx|d-v1EDbS;$t^m&W%{sb?y()GJgYdfX$Q= z$gV;O{>87=ga#aJ(PltP&Xm;4aD>InN{(4l55lFcFr~BajD7B_aVM)@zB6HVo}HOc)Eu>=;m1sT)+O zEcO7RUiMSlK1D!oZbu@m#a^z(lw!_VK^3*yyBB#N@+eZg)`D9O+Q=?AN4xBtvjW+3 zz?k(~vVmG2?MiBz0^5pFNZE`IAshK#HXsnG@T^4yfv91~s-(T<4d5BP&!bfbKY$)W zRRbK~*DQpl#4LoT9FhpHQPZ28)`*&K&<`UBzht3SI4^InjQ}^95m0lg1(Gun0(*r-`1B zWufPy=5Pyk5+K85Cjm4Rl*oFSGq}>DQDemVZ|BOQ=6yj9P4rZg<3!k1^yt;QRc2)T z(;|$-i9omjRO>j8zHgLVOb+Wg4+qjXUgfqTk(Gy~Zpzd@OLApy2VbHvN7mB^teP0H zHcHjotQYYXW_oFd5&H~R2vUdp1MqGt!xc60d>Ho#B(L*^+D4A}xb4Ka^YJ_%>5l2= zay>!3{e2QtV;bOJ0Z|JEP(cGZ$|p^ADieIsJxn6CLBaBZAx<&Ezlw0t&3pqKlozc) zsQghzLH#eY!xtsPj=+}Yq%!wW7S3nk1>+cpIw-dIIWA;-mC2F~yjQ*;z-)_{3ku^G z+v5Sevd6Cl0y%RidprUaT*E0dJ9QAH+EG`>rAKPv&m)5^TBfzEy~12i;UP;SRf!r^ zF_lt{LD`TJm6D4nu{5(>xqG@f?<19iqHr8KrUh*{aBIEdAp zR3t)MD$fCAnVj6pnT>(6OQ;gB=A(vLlprYkB+80tSs-nz$xj5&LK)~NCRT83T2xkf zm&lyiug_FZRtx1sR6$hDZDQ|hN~>Cc8CFiyqFJwHqn7Pj^omC@Xd2;CSd0@~U<>+* zT~5d9lo$eD>tKl5cHtYUpQX%?0QYXi8WFKo`u6`g4Z>ptiwPdvrXp*}=nd-sisMOP z>rhJAI>vYC0vfOn6IoUcrbUev=kdN6C=QG51(pkLZcuj(zeWy30=9`o+;UCynfhP! z8Gvd-&PssXjuGK44p=hxL*%gj7k$WFz>es`oT|fMBc4`@ZVFlC5M|42MTjw54AYcR zip^X(fKWc9i!xZ8qWSknQv^)pWM9YJ8 zZ(pT2C8|nd2I{Lyw#7jws-!h%iE0=zMo3#^q{YXt#gC|~{d8NPC_=NGnvwug8M4!4 zHY)_hYF;9Q>hB?8su#Fo!F&~z!BxE=6)}E7P(3HWbQ-iVqF~TgF*5}RIF~UY*?#?s znPV_v91`YP+bv$AdLEU8Eod9quD+ky+t~J`A+g}pSny^9ErT`_Y0zfFa2z8s28YLj z_axRfQs}EG;Tv)Lv2pjch@A!|Lg!#8Y3dyO?TV~iiE$Ai2L@ls_)k*N`vh=wx)J}t zVyGGA&>T&dr=JMv`{dv}L{&u>N^wPxL4BH^S9rOM;RhEX26zI@{->tUzB)@PmnB&n zvWGuWYqo>f6Dv%HU;?9k;ec$X{HvKHHSp~8pRwIeCdv!J&ILnvWNncY<(6QatzV37 zCz6o%-!1?IphB2{&`XrM)hD;o#NkuEe=D&LAB*t|M}vEKzb3cd?Q_R1X36dzwRaso zb&QYoaqzeY$5!;Jz3Tl=nyi*I_n=_Gt{yW@oh&Zdfuie>mcoevL!C#|d8oJ)lu(Hn zVQdQAw`4m@r`>~`=11LH@fvB@EbosTylN7*5F#|ub5v~RBh0pb`bEf4!NyRx} zlmRLmvmx9`gN2~ADEiFMP5wc^TeTV-1-1)gm>g_CZ6NwWZnTSGnrm##iZmlonQmWw zE7}0*WQpJQMQ2V?uber>Q`AkU`>aig1tB)xgdiIt;BWiC{TOhU!Owa8k88D+#l44|CBxP?Qvz1*oeh?P8($4Ipb@=pHK> zz^Q$qPYkkY_2`@N;`b0xZ^t6$Byx2%kEY`l%)csT-{;duU-d-_?8U2ClCvHVr#{Ot zQsBKTO?T|U=cK_SiI^3W!GgeQ9|?g2%40v2FaAla#9x8uMh33u1D}c@c&iF-MDTVM zTx*YK2sNIpr1kuC3nFPyvqd#Ih9|i6bO@{lI)pI*4z|Ok0}H^>K?KhXz(Tg>dXt}p zaYH1GUbfRjvv|J)C1gbg61E}0UFk|DfOA9O;M0_($Qc4QxfHSg+aWQ<9#gsz0l*PA zyD4J~CDk660xH6qXvQbxa*~#1<5o)jCPXwOUtgfJ-jv~v?GI|Q61DFDSN47Q5BfrX z2jW42E_!``8xR3?r4Snk^`^L7khW^@%KS!6o<(BPZo9$=|J|~m*SRUU}_It}3 z6+CGF>aWG04tF;uTrvh-rFitcgEx-#ZJgE1d-xx7<33td$1cFz+S*xrL;!|An?KzJ zbzHRHc)|DAxUuY#0akPcL#g_%;3uh>U3ycncZ8#RY&SPJ>*1*CBRH?jJgk2n{CtGt z@YutSCdr;mr#Cx-VLaP0urk~95165CY@0)s#HZ`O!@1E|F}($ip#H7Fo)M0&v0a&P zExct^UVH+xuwuB#>62}1X0zNu=4c+V$h#{tgHX70l$=y2%bI8%Gks^wH_?HLAfJ6P~!@}S+gY->>WpcdN= z;g`_|{Qz%WN#wi;8b)vQE%4&n8tfe5XocIBEBk48ssUc2f~SDq521K%g@=ICBOK>j zdma0)=qgH}f8tbXpX3ErK(f|uM@zphtA64WeDqpBo4H3n5Ii-)aiI0$pVM{gCOFIf z2xjy*RFA_T!u5Ngn@iu5d6w1guRWR2n*hHm;)J30V@QI8%rmt|`NZ{jL*Ydu-?Jmm zi~)X7?j9B;W$!bxUh@8fz8{yfX1(JXYd+Tt?>jl~WG{K?lIJ$_xgI;#jr(1myNsCg zo$N_3owKjR8I8{1&}vk-kQgI8EVLW#s%u&!&+#=$z^~g)B*ha8?N)Uu~Y9 zovcs)NG>4W^RW&OlZ748NC$wasvscM^LtsK<7%L^*z+B>D+^oDHe3bi`yl`P#T_1; z&yE;FAj9E3Ppki<{^@OSat1e1?ib;VVs>%J^C7^2y5V`3I&okBt!Ws) zg23a(bQiqLiL=T*r{HGIcQJ~>YTV0_Q%iT7uF zBA(x4Y&nYC&|Kw9V?V=}W%~K>HV{|&i?HQcGM$#w9}?Zf!J*Z0;Kw_bx9`EP707Al z*XmvHZdw~e5}c`Y>4S5@1aQ^|usp}Yj|1E&>=Bl(o-X$VjDjO0!X6p>AurN{VZmx& z-*a1OHF%qZOL=6X{}^71#dR{DPR5NDzrxr0 zy+b=oVW44S+6r9%(JLLw1$^iVI>J81^(EB#P2|BYO7P=EdL)ADCMVhm{j?%6p)-ZA zO5LV&4eOWYt=G@twO*3pl52)lTl9q=_dSR)R@#a@ZZ1I0ll#{v^l;Z4)u0oElWUH3x%LDe>m`xWGP+zX77`Lk zoIRa?Ys2=SIT=?0f8$7FN)KG_F|}GkxZL9|hScRA1=nDA&9e~K;L<&>TI(AT1oUqQ-MQ7%x6??Dn{2iE9!|csA7d6yaP+7r z=3h?AXY^!o*|>9xr`gv3$!UZk*9E_fxE&pi-SYN=BAsudbBGx(eS7UuR%Yr*>8(A& zs!Vuc9fLV2amn+>BBy@7_M|k2*`H5L`*=8ZS7mzVHLmqf zYmcxDI$@P|?2fO+2HkpIlrDf7^?ja3)CCAlXF!3>OUUUR(X}ieONF*Q7p*yy&b~|T z?B(p55Ur;k#2*I!b^*z`*z;`4EuBVOVgD2wtMd0CmG=`>aIVV0w2l%Tx zJU7Eft3ibcKCFYM2KbKVkT;eOwaOV&FG14q+Phv%BS8y`!}UG2$AlI;)bp=N3JZB# ztmgrJI41we*;OIWN|=IjiM7JLNx0RoaIZhF!^3NSlJXjWA-pByF8>T85WEOR%%0%Z z>fXl~0*{<;NkSSqGl;c19qn=6b}l7c_$UoG<30BzhVM&~TT#Uwqsp_m)D%WB5(ZQW z9!*S|o(xBzAWB>CSR!Z@BTFZ}0$BP~UY9?wjW-7!H(bKa#{-c-bFecxP#6k4(Gkcy z2$K+WBH)hl#-(jOtG%%mq5y85H&-3h-slOQzDDE{9Q)$kW;knoV^^^A8eRW!d6(!X#^rxu3`cd>()-2Ue-rcJuBzW(X7!A3n8^XiHU)Y4!Zk71i zS?zCwXSJDiODk6=;#ls`yzY6A$Up4!_Om2vyk_U z_MHaiKlf4Ix$rJ?>EGkBULXc@L5oL1mN5g;F^`RcN`zkEiZj=I`TFus$6?kORigb2D4+hT;XH9jgMxFj$eWg zMb9%o5qt#0qir0lS2(x{U|YmQ$|FnPLdG~8dV8V#N*mPm zJYIqB=K|egB$37LR9Tt3Pyn7}}uiRGLqeNqX_m8A08SdwO00g0i=2-y#@CgFg zL2l~lF5-*A6d0y-^JfxvpKsO8R0Pkr=>B{r`B^7!g2%;}5+#s)IZk41%5Tg55$)AH?0vYh% zhfu&jNq+O>_kQ`Ej9=&*K%gPHiNUv#hHHiKi&ekAYB{4GclH^5zc#H$-?SF-%&oZd zz3@}VR((SjqUTj6>GOC~3T)u7Htka@DjBqCtyXm~#_h)}sc$MmF4OIB_?cZ*x_>&txN8)@>?_x^sy|F&e>URj+a$QC zyx%aH-4OH|PDkM5z!oekjVYI)vFxD6vW6%Lye8-|1y!pAZ5tE{NsjO+-zI6U@>WAy zhiN--A`s;I)Rf|{E9|nkVX}Qg_|kM@f#%9?(YI>T&gdJ~dy6)0i?K@Z zkuq3c)r>SpGkN47Ld%47pTT=}gRh}M_cux!n~J41Ahy;2JbrOu^Ey1h4>cz(erQ3w z$-kE`@z>+H(JVgbC*G}5QZ4`1oYxoV-|C+T#5gl{&m8!L@X?1O&RmWR-D&@p5k2I*xn5!s4Lci+9 zCl69V5~NtO!VkvN$|m4PM2A_}6_wY<(4?0oGx8pQWW)c=9lqeDT)5RobX5o2<_q%` zgdo?bGX(Xnx(1I6AsKvncYMsZiE!q|UV}C!QLcTX`I!OB){tre`Bk`05;>s@p6x!C zAdgw(Xu!4K(re$v31_uZA)K~6n~Q-yoaQ3$tVEfs^H%_G6n_!2Wg;LfUc!)>CuwBj zSlS#(Bmc+JY9x(p9!sl3jDm|isstAWQ(s1`#5*ujN0a|O6@rK&4a08rJ(uD~!{l2- zpur^%IEIHP%(nPOAAw*`s=k42U{2}K&D975{Qtz?RX@RRlb@`o+OU{CAv{Fsw{iTA zJ5S^JJ*~7qzyF8uJL|eCzuN<1IWnlBYHT2CRYSHtM5zA-{2vnj9~Z~}+U9NA8zx5< zRzTdGhzt#T2hv1V4h#t7$ACae=%;Y~ ziUEOyFB}jimms2bsquikUuitlY$6>JVmx27iR6h(`0^1$+NZ}#`!=y>aS3rl$ncZ= z7)Zi&iuK}NbA*w*0`hAJXC(Q5h7?`G7Si%kFuXcAyx5ZO;w`b^wVlglKe^5>$FRkp zv2p|%<+SB@A-`5H!dR;}ITCn%7Ub9m!H#4{^L1bXdBm_xR5jI&Y0U&Oq)5k-lNLM-`fb&(B*e+*vXig*0l{Ae)= zxtcZMTd-FFk+xX?Rze*SqD;wgMA!$5!KFoACKE$70YeNo#x{Sby|GGo^wc%HfrzOP zykRc_O)`N2E6^sadCqjIYlvhy1x<)8Jo|6<7WX``kKX-UPd zUNtSt?|4y3aK`~uzqj!koG>1D8ZG|@Fy|As#%YLFm5cBC@IKo=62F@N=bsU$>8wzc zRZBG%^$}TfBx{;v{Z~kt+D5ANme#MQRL?!sJ9A(NIte`Iq1qY!J1NiGIyQeG9h3 zR_#RywPUl=d>O%PKdaKFnS@L?yYP#h+!2P!O2vdHAaZ|$N|QSyRR1vNDQ1M4B)MRn zH~j1$kO;n$H!vX=r%jG2zuKNS{ZSwyNzeIw)zF?gC_(43O z0%iskDY9F&Y1?(P4ypca+RuZ&O>8GY`}uEOzYDy+mYGdr70Uz*#@*Vq-4h_C`3jQG zU8|d~GJ`W&_pe6)qJQc6AE|{<179qCV=Ig;{*4GX`QOGb!Gbl#--vJ+I@?e`^FciD z7dcz-#C!=RwzUH;O?!$G6KXaQBG?DULr^#Q+Ze&0;U@%`PVftTmyaf)k9x^$a7!1A=A%V4XHb(f%}>u z7P{~v9}@*0*?!VN^WV^mywdTcO%bH%5;ium>(g|3WN#u{;rl5lt2AnjwbUfj-vuSz zbdEEZ-%TK)W~hMq^4;fH)hadwb^Rx&K~>p{?WJ@PHxsE3Y8(~6E9st_^)$^scU#?VdD334y)k2W_-0TvUJ0QmwX)i_ZYkf@AEsYs$61sG*b zv5}z2X2`Jlvhi?_p?Gi7xJ$SuOgIeefmszbj+ah*oJIl$hN56Wc68rmmBLF4G8(wn z8bd=&onC!!3Vw(oxUPmhwLzL3p4&K`VW6MJKv!etaPahy+LKC4xcl5O@MwK6bp+f&VQC9kd1J$R zil;&0HAzi3g5%urBIc{ESCa%pFD^#ZmOtG~)gS<1Ap?Gf2iS~{Y<~@YHUBUiL&S0o zVTYP}Wg(&`g%>5x`GD0n0pIyn!$ z;OG_7QetV?6dehRP-{2r;=U?ZLS?nyY&vrdd{0*ANW|?av?t&;6kH$wp7GYH_b_Q@ ztq6v$hZ)6q_Y*{uvVLT|`!NFA`|fGRyJsZioQ!Y2a8spOH;~fP`0*hmFLUC);`BgL zuqWB9yNBsW3Ebx}>$0PfL~h(xda*$#K@d%m)DSh;edVonwwV7hK>FG#HS!#IL z(EV(h_ljmcW7Z9buOilDPw*nxm3D{WLCb*4(;Rs8bGH2QU}**~Q-%c| zMo(RgFLNdZ?nfURlR&>1UZZ_1MN{yN0rt0=%X!`&0;tJ}o4eV;2Lt!3-rZ%l!D`Vp zYaAp624G_r|IGt%g&#I!L*w%rv=z;lDd7~~j9lx`{6(DKgwn47Ho^Q?9Js~!u5Kha z;3gpDJ>z|Q@J9InX=>ySG)mty{>2*R50bG4(u_X`Qf9(cbK|VV76z;uw)T0rFO{z?SCOwfzev8eTurns z!{@ni@^uBGB42-ufUwoOOC#nuLo`Uic7>qzP3@8n#-f|(ybX) zdxfNsuhT@nE|1DrzC!Il?AxSB zpyg5dYBdQV)JGmia8QnC3F|1Sl1f{m@)Zq7r>?_-k>^>9qQEMo$qi7%Oo&MNgpfruoBlDi?u-Q$qE$3^b0 z7rCqW>8f%U6v0^fDg(No+_eXFls_PM)ri(a?pnkDKAyr=ayKtMP>?EeS8>fUw}u3K z>IS(hJacuq`_)H%Ke_uCK$`LAK-y34M$d0pH;6$wy^1~yrR)lQ7CNr2&stj03*cN! zr;S`8?i!4@ZhEVa%)J>=k-5VW5C!PnTO}0JX~zkl{&)zI|16z$>wQVq?B|ntI`Rby z_E!W(>9+lW`BS>B0;Uo2w;A$RHtukC!FY*i;3@N$hya{-H(p}5ah%-H*-^?`WYdWi zsJ!76OOdtpS)9Y?*{?R7$b!C_sFc|ORA%?-9%#8B6jG_o<_yHwCyxDk74k;Rw4sjA z9cRs~A?C|Zi~f2l3FqU@tUJx0sdzX^FKtm;PBJD2T&KFDHOy}^pdwd=jI>_|JE7(M zzwEsWcvRK7H$Ib@z=%_Ku=zB$Il^h_DJdQg!L%BQ8YF{Y6F?=378I?e(kd65QMBad zFfg0V<|Zgwt@hM&$~lJ~5J?P5Bm*%Ch#D?p6sl394kncd3WQ7Y|NY*z_gs>IVlU_a zeb34BWcJ!?t-UVqdavv9uC3q>uJlDXx{8}ZM?sqrMbcat$NWMCuTU*4-i|?ifLl_F z2QDahC6r%(B77VIQ!yWCzT||UuKJS{kMRYl=+3&ldgx)$!@d0yo04NU1zKQ^A;)mi zM~Y(U9cwPUK#<0d^3P#Qc=~}Y8OxUVr6u0Fa2FafAeIpcq5L|hG$ihO6`fRta zo(b7Qep1hzGoZ_O+@kxD=3GT&k1L9I8Oto*aIH|qK%;PQC~xTr(SnuU1${nmDG&(U z*w*Pq3tkGKEyV%T+o`Gwju=f@3- ziciarYmIdaRwwY|MR-*@FankiETNt{FrrVb1IrL99r&yA<1=hbqAqMVrdM6KM`Iem zk8!-(=Et?hQi4JFF##a_c%B5nk4qRJKdv?OWfK0I@?*WQk(@g9d~^8?7K_#kx2wTC z05Ze+VvPKAZ1Pu3(B{Xd<2wU;=R1t<&Ue5LZN7s>DIOfFyF2TFEU;KlOf|Han#J-4 zhEj#~SgN6w$eO`=lxbzLBi5`~k0Rc7@)z>Hw%$5Vrn~5G$#l1WRi=BYo)7A^=j8R> zdrn>-Wx5U8qThX8rh95~if6jSa>^qc{*M#eDG`J^GCdM({uh>Lkx?iD*@l1E9FkQKSUCwi!F~5zQ&$amNVv&TP1(?a; z83XH_SO|vSgzKqiEk94@cyXctbG(O);#%XWZ~X!MH~qQrCz#{iY0SS6udehZ#{BaT z0QhHOI?8zdJMxl>Gwki=a%H4Ge-7dnq@EYL&Pj!8xr<7KyeDCrF>03d35{?m5>gEV z*HjG~Bn<p__+i|On4~8SOQdxB|ycP0gDk6JXDOa8xXTbU=5-VL-XxL z9|k||MIT1quc!}O%-0ER$JTgpyaf6wbkh@Ewu-zLQ>;eTZxhuq(Tg!RV3Sv|Qh31+ z({Ho%Ug$BBL7B@|2JpZ7PKh2a%3)kIFRH{;^(f5C)Vb^Nw%be}roR-?0c<~g^)VmCJ`RTmsKeK-wyE+9blo>cE-6Odv3g|;G^ehH$ne1LWLGSez zE-7|QC3gf=(m{23;S<=b(WdXBt#I6!95K8vS_&})llS3MD#Dyg5REt70bM*gLu_lG zo#w)*a%{(;LR9P>QRm(Q%G&NKY*f`AVzoISB+)ntR0n=SQNB?Cg*MNFwgEpDoR9&^x(_o<<`b6+ z^}l7U@Zjj#OG5oQi^Hv;{=LQ{Lj5_98;@87e~V4+zg5)!O`}rr1sXE#FicQcXu_hC z(hW83i23sgi`0y;lYQVcI5OoeveaPJO3WVFt;Fa_D`5qqmAn52t;ELJGiYV4#gyaM zZ)|<|uP{F`7ce>9{KSL5OVEc)@Ctoch!kXZmAPKg>EjO}ffHW#q}Jp2A_Bm!X?FK> zUt%n~Ptv{DT9i+bS~xJ2RP&y@Y^xT!)~T2>x6s2a%&BK6PSYGwfd7)_3`%GY=O{uk zR*X3c)-9}o&| zMp!IYFUFh$>&3jp*}_-sdJX^feqPjpsvERTStT|Lj#llR7p>XCm^aYt)6G3d?c~fO zyUdLi^F-ZLOx1+p;D)sW7ynX-OY;f*Cj$LYAvhRIfm2FN_3jR zZs*sdU(5uA@@|R3=N5~ns+N6CDz;}A{-Tx*>e;gBi~{r{n}42mJ*}me`CY8(*z>!x zUqPGuTa1FmKU=!Z?~);K+rs5f#IaCH$``IgOs`z@Vk9hZUlIz}>`ykVP ze34$M-zoSj z8k)dg{~8S))T5zXmurvl+>ORkf`F`6XNAIH5lMjJ-f?3o;VAr z#R*Nf7yTEja=qxk$lKD}d@wmaQWEDM;6;R69L@nTVp}T~*{<%wDQlYJ*p3H<3${!% zblUsPC)7eyA(YH-m3?s3+6&Qybu(z9uGHtT*pF3zdqx!Vv#?N7(`a!Y1{6Lg=10aqIL7O(`rF?SBwz#m+vZm5S+%;T=OvT-Z<4W(>5L$o`GS zOQaHQQ_fB1Mm1IZTScD32OYI^>z9NFp$C=1dN54}pjBJSc63f^wQw3u)hNP zCI*hi5`GX1f9Yb}z=H?;V!#s-+&93H6(*qJfCQ=7owc#lTkqSA5p(SSXD}}w^2Sc7 z?Z(m{U=Np$9RN!&mH=$`VG@Atejx+2-M1V1KS{Vr6nvY1aod&C@Pkj~^r0%|eUVEk z-bX}#%Ni9mAmelxS%szn83}!}r}-G+R*XdJ5m8C98}HOL6^(L!NmVzvdacXdv##XR z)ddPn$Nnd3X3&YgDO#aL%~)H{DZy+}=sc-Ou?&kBwn4siTeCux>J@gI+kC#o$a&OI zQ^H(|nluuiO;A9s;<$`|BdZ$g5)w~X3_~n>rTBTQ`s9Ew(kGV-_we=+2q!@bWfwGR zi{(6Dfoy!NMaQ`T5}Q6SKjy)nIPBi@dHDna?auZ!YQeXK;A`Q?in~V21SNdb5J$s} z6{FS?nG7%Pf@shx2N-37Qa+%>O8Gz#3tl=lrB1|NDjH_Xg|y-8*7yyPjT)ve5=s#m z%G@&a+t6sh2t+Q+T=JfT-DR>#lk*`X3^%rPpgwT1W|tetC*x!I;Q{VP7Q1A**e!B? z_-Kkbcc^7yhpxf4ADO-2mbGh=Vq2PMZpQSloCx103Q>{Xw)aAB08y0Q05;HDRgB(# z5TmySW9bXaEP8uM0-(1_34q@In*q{WgQ0Jh@R`#aOd;EXP;*8^mz!Ylga&k{fzUXh zrO+m!Ixd0Cyh6}fhD=C3D&lz#{65*1f{cy53@Q6cNYOu*eXDA!*-k_(5YifEwQPwf zMP^s&T@XB)*;q&IuPros3PkqzTcdh>8MXB>SgdQ(!D^apxFJD@BndSl(Vt$v>k z!ueQ4#;nSC*b!Rgx#rvyi@->7eW|O>RY*oE1Ifuy+9a0~+eK*GJ5hRr9YcC+vgnQ5 zwLw=R-yr%xZ;*13Z;*1Jw;IyhK2qxbNfy09TWmCzUb~p|)@CdnD*^1@xLyJ+hJGaj zq_;*xA0^>tNX6Ls@kII7Ch{#3FW<=fy6+T#wnq7u#>Jx^^P_24DC#cZ7^fDGy33w! zHHw@&ZIu(YxO=ZNxtpY8oqe!Npf51;)V;Li9jk=AiwYIo5l5|^@-97;S|>Fo2)uOe z$mk~V7>8bBJBHL4BgNu2k$cowWi?Rb9uX~ZLx@yKxyORsJp~`5(aUHfz3?H)IP|iv zZ&$##+mj22ULyPUWn=f<;(v&dBV?Y)zU|`jOJpAyy2w6=MTo;Ria}srx+NC(Wdq}b z?+b-O@<1Fm8fAh(@aAQU!$xB*aZkkIb`ghyfj(f+O8G$WP)Hi$5CjHsC^F8N+-UrU zxGCbW>dVDpT`r)CiEff8>bFE9>V!y)h)9$nG)TA*iI&z6k+|_oL}J}F*gaFLXf%3$ zBG;COmj1chqEEmF^toQ>6Eqp6Pk<8iDf*|P&zocP3H|dw4U0biTLPfZf0qF0^S2CG z`sX?cgFd7FO;3lp9@YS2R-0&^)3(?aR>-Dw4DB|uvR9$7g7!os0td_|OtZ3g9H z#FZ5%7m2XZ^;pc-Q5LYK8^{UrL6+T2Ruv6|wMJZh(TyxAADg1`5p)9i7=bMuFCRIw zU_lA;5fxKDf;hMI6p-m^{W@W-1cVaLf?~u8Z?Tk<=xdyuw5p7@oMIPMQckjP>1(2( zWHkDkpf#{g#exF9#suQrtt}qdlQ=<%`+6v*;M|Hhfp$WiKtd4bZY@Y86*W=ms)9Z- z;>7J#6rWIH1^r;$QhY*z6(j`FP<#p=`q(pwPf=Ix9zb0sZi@I^e+uy_;6Vb4*0RPq$$3wnhNg}tcg zl}u06e$cDvuZmu8jL|FP>9P41y>?0f^qPbf2wIT(r;M@W>0t>c%2QBf>IlQn4UQlq zsC`~+WK64b*I~U4h=vIsfa1j{*+!K{E`4$su=JT`Eq$8nqei7#_q6u~3+-{y6K8)p zwF4uH0#4PJi0V$!Mbwu594R*)T#8-1$z~EVbtC}g4tS7eeX?vuh^}&AK1iaYU6kn~#^u-d z?M0G)H%6>bXho975i96QBu2?B&Ca0_$Lzq1~S3cbC5wM>>%!UpmwIP z3AB?lONYB^MhPBb{xl1=LZh)kuo2w_Q+|vHso0|0b|Hw#9qq*pp_{mHZZ4M{{D=zO zgdMlo4Pzbuz$W~L5d07OK<=0{MO)5Qh9s7mphf_3(1iQhgkseEypjTORY@h=zr2#| zsKgemw!UfWzh6bZ0)kO{vxj^g9-~*t*K6lm^g31o)PE%adcB$fOTLbh@K=+skek*N zk7a35Owl+_e&ZYCdw8y{2KN7~6MGrG?sc zLHRwC%Dlf$Gy+lIgn9NtZvH%QhtpOFx=J5q@1w96!Qv)-WGU_(SgSyX2dovt1zA_( zC}}9Q-0oI6>?qcPo!;PeS$*Q!4w#Cq?b>@h#Jal9UTrLdM$k`I;V!pm)mmp zTlD6AYZ=Z33CiOYQS}xQ^vW1f#!c;c!YJK)DUL6E$O*ZaB6b9EA>UL z5eU^-yC1kBf$isySjYxAJs6$%CEhJa9ZvKpj&Mn{Qm_xF9jW!tjctKgAL@^#d7Rq- z8@Hx>U=x)ag=oOJpj(&sQR0VEo-N^QkCrlDtyNPjlA>_;C^K%`TUD&^K&=v>3FlAG zgdR_;?=DQB$IWGm9`*lbKvCb)7bFt2`H}=co0XE9NRNr~lbQsuTxotX*H`u)?(`t4 zxwzE{J8QC@gLs2TCCjq}CV2TpmxfwvT9ZAm0I{G=LRq}uCR=j)^RXTkN`HupHy^sn zK5T}6jJqEKg~o|fif>e(`fGE!s3KV4!@;#;8V{I-I>P2JmzG^4JD|pZ+3* zgbRl+u+wk760Vcm7i3*>%HCV^wUGZkdfy9y|CtLjYC6fbU*n`MCQGcj+f%E^vM@-p zQYx|_rc#ly!V;T2rCwY`WK}Cp#$*tmOE#EpH&zPbqO;gG=?=&|u3#{*&TYicw)U0P zV$Tk2{xX&cZezW4GM0tYZ!y=)E{_F+u%}{u=$x81Y{$XMu%|hMd3~Gef$Pv5p%whd z(z|d5MbI6M`6g$d3Gj!p^5jZ?hyYgy<#^NX2plz_I$yj937HtPdw2j}-Awfh4W8xc1bDJ2s5zH?bzR!&%|1pO|-fS%S zqXhODOP-ZLld+^i0=tc}-!b6BrBasvR%|H}r2{f0^=j(V#rq65PN27AW&mQ;<%VXA z)mBU{aryCFbE9Q|eU7bxp_@Ae+A{TKO#YnHYuM!nXU);sxRA5U*WTr8>++$MxTT@d zzbH^UxR>(_gJK=t64&8K&knPNMN6_u1W$;#7> zI~%O^BVN7(^$L1J){VG`1vUVNmrQ}W`9A9AgWu|5*i<>wwzAX<} ziPVBoY`>gL)Bqwsx; zz0QazKmwRe0=9d-(C&5o{S%5|VU1Ej{}?0{qfgcjA8b7M*n1opf8BT=%&o zwHwQhGEj(H2IKv62pb}!vX%nScVSebZ)lZimcmL%0x>qFK4|wvv<1=rn){_*3C9|W z3BcWi+RR)GF?lIQ*;1r4qn*aBA=~})fzpZOoVZ>W*MB0A&9Iw$_8*%XMquK_SmKuM zfr{JjlTkI6oR9#>*&#_F=cA0lMT^n-A^Tok;rS(+-!H!L7@hcfzgb zhtgrsfbpmIwcp`IrR^+SGM9e29dkKcF^=)CaTTWVrl&^(wP~jsZ#d-liWF{R_nxu4 zx9D+p%I86=wV)bLe=&l7R+!W&uy;k;7yXRA_@}1D0vX3;a^6<37{rg)j z=EXS3g}tQjX&xROl{+I+19*EYG`cIaqh`OGH`{E}Dz`~eO4)nup3g$?Cy5dI+`kev zy5x2!+)`wZm-p7#xj`GA;8%e*k3v^7aPUpWUxBbuR{g6lY0Fl$ zFRBlrJvU)|Qv@Qnn)61oMe`nh3_YKRgEGgXS)++`hKqC7A?rG`@^7F1Bvv8AP z(SxoP4D*CD+>1*q*IkNM8d>vPCiAL2g)a<89M=+FxC8+heViER~j|K7?r#t@1+GlhPiZk2f|*ds3e_HbmRALA8fd zqh2n_SvwMSX-_&Pt_FoJ6z4~3ejhW4H)2iOI!xybjY=|tG79;QPGbdu7kIy2mp}&m zc1lukCV6&qJDl4x{XO`Vb|YYpaOy!1W2y;ju;wN=It5pp*i`4#&7)%QrNhyy9y}qt z^1QtFD0n9_gV#xTiiF{hD_IX_Nf<7<5FUy!eC^>EaDtCN!bKZgHtq_HLPl^jbA|{d z-CQMM!Uf*0B}{<8gDAsggaTa9F>K)?0S6D@j4@e02O-7nL8*7)O-sr1I1#=~Qc`e} zt{Z+ZXXJZuV{WNA8?m_e78mk1uV8M3ae;30lgzE|!##i-rf1+z=mUSW(!tITR9NY_ zf43Dkk+(Dy>0jgb?^P7^$o7yZN@#-yoh{?v>hH$rPfkh(0f-fI z#fH&LwSoCXpe%F@lL#HBZyUmLaA+cFASYS%6&wJgdKG`MlkUlt2vFO8lBg>yqEC`M z%ygHrqKZ+KSU6p;R4w5N)VZJJfEg8n&w>;9@YV$qYpLiPm04ze0n59~o;*`g)Y4%{ zz>EJtEjW>sE}jhN$eEoWB`W?NYyTAN%}&bwDjguL|6Mz96FVS`BPAdlWlBJp$&@a0 zFku+%gL|%^{=roAxcUW?_(8%8Crhxq?WBlohN7Pq2<=K|F+U zo%aFU^*$ql=O0-j!nl6@K!x>9lzk~yid5mptglIO?>&k*aE<0L7#eS}$Gb2zFv%E0 zQ+X9btCH^&LsMa4s9!!r=R!9zsvpmyhGgs3A_De|1qFRB0}b)pE@dy7;z-D9xR9;wOt zTjrR7w!$Z>fMB;F%Aa0A&TFg_WkRvkb)rmE%x1i(cuEmf(+ZW>H5>A|ObAwxWQ=Ml zBK1+NGTV5PTp3GEhQ*jM6I#K>(eU1=PIyMS@ZjW|;s+ zDz;-p*Al$5V+2Smq_;|cUM8SgA(F_75$#Jfch2|N^5foSCG;>2albBTU{rJbxjtRJ zn?1s`j0iz)t`Hz{7MT+?8`VK|DRM#T<+c+zH49VGgm1+;0iZ@WTU!7b)nDoUGQ(=J z?^^I45RYLQCBuE~ML&!b9CZShsA`%^fALMIi4$%s6+me+H{q zv45l|m6rX}z%oSF6#FL+ucVMgarO_hi2YOITEVbo|41v>U5ZxruzwJz>>mUy`$s}C z`$sJ)EgOR9uVnwkJoU(>NtO*Ht-<6AG!ALaQfW=^HW1q+Hjv$>4OdAhW&dVt{s#3{=bxTF-RaK~y5d4x(}ps3y!|2mK%!OetyyDFs8> zL8-`q>DylIAb1()=lC;%gaPcG+lI#5JLsfs;|!PZa+Vfi=W$JkgxO==6ig_)gyG;q z#9R8C7`8EcXEy7w?47&#wXeIqQzhRjdxyCpYsB7RZiJ~YMC~0by`2h!l^#_XC~HQm zZ_dcxQS~RN2VdFV;kWR?F10FqN0nyTJF1Dz)mF1@^`KXKhj{=fv3K|#c1d)zcT~~; z_W}w+S=l=_j6^7(3P!e2o^1)`LqOTgnhkyNP?%=h3xs|TduJsfNPCCaEB4M51jI;a zlKiPRSW>}a{jrsYCmWDqLFy$TvA&H8;tcVTq zmKD(ktPfKv%`$y-=9U#pLv8+@(73;LxOxFFCEGy4AtnATBu&la|md(U%%W8maI#83L-gu6f4peZWmK6); z?Fo6IzOW$_-4%;vx;vx>-TtP{P%Hmj(E*k+Z4MNe5LI*a1pqB+`TRT;RceV>BX z&Aws}PGMhB5XerG3N}&fD_M*;V)oTZnFNoYJ;TJ;cyN6d8)sjQ@2Ycj!Ny`ia>E+? zrv+z38Gh8pvH_)RECndb#u{W!SkTw-4<3uV3&NWjM-Nz%PH+Ebv9QN#RcB%(6!1P zb-aBASGU)88lqxa`%UTn_S&wxB%lpT&&BO2xLc782u=gk3^je`P&U^7PiSKiQD9^B zL7$b4r9!Z=e#MZov7QAgM1F((<+U`a#Kwx(FKm0O=X%qwn^4IA)OypPID2b1`gzLr zrh2rpyS?=a;>6y19RUm=ZeQ6Vp&p*9Uqtk&Jypx1l=6)F71o=iCB52O(jMAcsy(o< zHpJQ^>rIv)U0t;YCvNGin%8`&^(NdU%-dkp))>D0U$x%U^_@8Ti%_!Hn+O-%79&9H z^(I0galMIv```7Z__dT2=pp~R-h_Gb*uq@Y{-UtKORk9S%jBi!nw%}VZTsuX*PC>i z!IZ82y{tD)AvcEkVNFirD4w+h6+0^&osm?Qmsn;|%j<^3^`>r;_phszcM*$71@JmTSdJL z;u%^+ryIntYZa+hCCmYSWkXhd`V#6-ZM~@pNndHbNmK!~Otemv z3ClD^P}5tojTPq%YTd1Kh1CMYz%*!G)Jh!vFaQvuLZlf zUHsK7m{7w;e!9VqLhU+0jU`6+@}J+^N)y-T5?7i&_)~19=@?d>lob?FAy`2JIuNI< zptZDuRv>@eN|UmJZ2PC@deg3JsdJ{WYk&Xsrcj*y(|{(Na=ob@t?Xg{AWqpo2w3)y zgnHUPh(5LbBa2eX{`rdQP12g)Z6LNuY#?cg*g(-XCE7sJrc>EKvM7anvtR?UP5*yf zZ_>_-w|CGR+s1iC!XynNv_--)j}v-P!W?F!>~)6!cfE=FyNC8p6`(?0UhJK_j2rH=6 z01Tk!@%LPBx_pnVjeqHSlZLFPv8*n#l22h-eS^tS%ZfM?Z&?uoZOe*jXKq>Xt5aK6 zoQb7nMb7`1SXQc?Uw`r9Z@S(zeYZW9L($#dEvsvh=QNhp&#mNBSXQH%9JQ?ML9{Ka zUIy_DEvwTF;@7pT{?Z`>x~QFes-V&v&S<^q0^72(mr*=D*PEI!T3^22BzlM9;OnTx z>9$!VVbNLEiOyo1Rg4#29$m06gOZKWhkZprEBlJQI&=GqB0}t|lZloBSDIL2bft+V zms)9JFXL94{5@?f8$@4YrAdIJHUwE~MgpRQwI`+Atwb~I^(m#|3Fxe^l%gjFmVN%q zUT?}Yss&cE+$2L*y&h$0m9(!2Puf>??I| zBM!XFN)t)s_WiDdUqIb8EEVXQ-jx*Y0@q zJ6-j@wz8==JE|O|Ll6~lbiwp4Xfc=Wyaxxxp4~YOzZ-U9HPF;|{uJ7H?7S{q2840{ zg?@pKo4ece3vudJ-oI7uizMBK#{1fLzUXw|pk<)m9jJ4c``Ruk0BUVcN>2LEuC6N_ zYK4{6WsZLd+6R)Z}~CqM0>8QG%2(T z-ZDZL1~$X%rrSzBD{xGEPGef=0-WF;k$gPE>A2#fPcBUIZ$Jfg(rx7xI zR|9Qv{=NJ>(VX30d{0IloFbVU%kS-*mEmIpoI5giggab;jse=ZSKu9_%e?^Gc2fL*0$|4a z{}6LzREC;R)m%QJ=TFDO*L184pRw{xo4iUAkEdiDGEmSvuF0$QNiSC+ z*T#$vJ^$qzoVyGh_4t=$)+F*HBR_e)F(J8DFInt!!bvN0#QW!k$| z;m$+)~G zaj>;9@3y++PA5+&9ex~8%AEO5GyRmwhp5K73KhCrKHf0r<|2@(!zxts7X! zORA37SO>0l^}w+`Jow^^{BqZj!e_$AT+VIf$E;6wzQ9j5s84qA6S%MUgeH``z$r15 zTJRmPg+T52xK&{rzr1i?q-PD{wb_%sdWZgYr80Bkbj?NZ z#LzwBYWdph98$1a-%a}GaL@&+T^#?& z54IQ+fCM(($vEVEO)o-6 zCIwrD6s{dojOg?A{NQek#hl>hx&94Nva;x@$|y>%0ZE%h=eR&Z8wrl$waz!q)Jwy- zsCcq>s-C(92cj@SM&VjBwLfCftt|sHI>VnLRJ0{`NWt3hegyNkOi>W`|2|MV+QK1V zO8op>pzR{;p9$1V$=uovzqIGaH*3$&d>XeNXYA3Qzf606VvRnzA>%kMM|R=PG2FnA ze*RQ_(yO@tpwUdfkik7e{EcYBt4$fl(56@44n)dE1UlUQ=LBZa3d%@5;6W-(AT0L&p3pe8=Q1y(1`7VJ3htnQ51ZQ$ISZHj!zj%$#{FmC#d9_ zv>^qJJNBcu*9^?{|7W1~A~kGL|Eg{ZHvB~aZ8Za814C%0!Y`iJ^k!xrjy6w?H(U>8 zf>902IIgYP>ueeo=uGjq;(pygI0bH|6!-AI5U6$ko$4z?AO5!Wc@p~9dwrQ(A@0B) z^#;JFAK-J2f)9v|JCG~qoa4->*Vc47-(>`Dc${=jQpOfS@Hi6tfm7z4DQG32F?@*-kC3E5+XcS8sv3TsRae@1*oA`Zf!S zfF4b{=7Q%&j|AE>yIOx6sI^6vv|sd14>sKfI#TBJt3n66_HRVfEWLHEXC}`hLd9bW zT*Zk0A}~<+FFF$L8epbhnR%QSxIe$~CSs%WU1Ks{CfzV4`*`t0E1avtHK&RODBpEW zZVMmpKehaLSKq0d@UM+~SAX}&yHkUQr)p!4BjZ#f>jvSXIX|ANtvQ0`Pt~(-ni|OY zv7_iby`dEzl)O`+he4qFJqX;0RDiQ+GoGT{yG6dgw!^A7chw?h|W%#=i{;7n&E#X}qjQ_rbe}9bOArc;mBJ|L|NO%hbvL3ob!k3)Q z@TC$CV0*M48ZP0Vf>`v>RT4fV@gpU?OX9DQ@JOOi=*JTNm4wGh*oBVjp&L{@&XVe( zn-Dh2UdhC7562mOsf5FKhkERvjSp=2*!Y~Putijq>%c@ZonQvnIh_Z!%2_8QoFw6s z5_T~>rqj&t?}iM7BNlU+qYsGz{G>xa9{#}NJg&bR{y4??uAVb2P?r+u%!R8hdczyj z^#T<-Y#N1odq@VoFFt$$T~nu|<;I|#^IY&*T6v-K_<|?W9vYeC2;F>AtGv}2_uh&3 zq_}rjn)kV!oeQ2AD)}z}*Sj`w?3jNI4%)z1oK`u$%S^pitDNbCnv)d%1UzrHTdSN1 zWXMel;ieAU^p)>P!lgc;g3nCvC^P?T^>Wa3Pc-xTCWRwOA>SeHf-Uo~t6LS-gP!zM z_+Szqdr&GHjkejfos`;+B~9Du#2@MeXeXXPDf$vGN|9PoQAg6Wt<0c@(k1p*Ghd63 zy$G?+<7WP^<0EqrsVY2y3Qw9@=-%w(=A=uL|z!2a( z3W1q`+-x}I@`P5-WZjc)N^;_+t)$S(S$GYtoWjWbk|ZZox1><$UPgv)m*4S{bbpeo zAR=kMlGr=s_d5B_#V^>HnLi4d+K`F$gnlY%*URq+=74{2GEKNOYOw}E^4%agu9h6| zcZD0)M!+K;4lr^sfIFe`kxXMRQrHo5(s@o^3!8f)+Vhik&p9ZwT{>O+5FB)$g$TIn zL%)B zNiJVAu_aK1C^K&?-dp7TPI;e|9(gFn76+?%4)eSm_=;OBsZ+XmEl=)9f< zzLrp6wA3)m%u5oK4@{JL$4D#$r49a2;4VqHS$?mT`=7jUfQ9=(-VkYkcX8t+CJB&HZXiS#a`)&4O6ie)_5<7~}P^^YcF-j!u zHv9^haK!>JN|=uTVTPUXYv>DRUY{rilrn+7U#xfeY^i81as)oWvukkGW?nohO&o`{;R|+VWGIXdIHD_k?SP#X-2{oIYwu~ z`G}Vi)=ExX<#z+Tfmz^?ga8uE2{$L47A#oI z;@>lJ@lr?nZkuc^z$JqJ5!!K$#-6e78fj-QCRuTvRNQ!ZtHUMq|zrFv2G-WOe zwEDN4g*`e?VlI@B#xzPo2yNFAELg1P3;$FK7pGw)VG!ukIuk&p8C zsehN>Kj2qy3O9S4)b`%vRaJ}EBQ8*z+M7N@hf!W7f9c%}oUJG~bEm#b&P$6I=JT9~ zt_~ba@qfmB+(qe`JEQuIx?wMx-kRjx8`zT4Iz(;wJ^+;@bFcn(+$}usKDkRQ@;ER{wBw zse_(^ZM&}CJ**Ue^?AeG*3)A>y?jCyPztVpPwS8DPviAxc%wb2rS!%BIL|??zk3*d z@`rh1-@U`0`LpmX<~}kHqrP(du|DhRv7TN&W8dv*y~6$`u|D8T&ZXUSmdo`A-TH$b z{XzCuY|=N&!&DIk{!`fVA{?8?r`IceGh>hLZ^y7KvBtxNHz+i@AY+K8^x@7!&}5Qw zpvk0XUqgleW2g)=q_4I5;KeHiDiO+y6kxKaHA^6yOHU>}ehC z+{(uY8O^>M*yz?vML`57hu*nas{})6MA#)^w}g`=+=t;YXn>i2mM7fdhG;g+9B!b) z&LzF*pDFsB6u00lYw`anc-a3#^$AXB$4$sE74Ww3)g$vtDiPCunW(ur_xGo-#JMT{4B5fqU|x1)_@i1XWaj z1rn$B1Am5hbmyCN;`zkzW!XT~i5*&Hi8C?k7^0FAqrhNGT!~RoM@!s^QDDj?$%#=A zR3&{9qo9hG^i@&IRU=ZYUTVP`U?H?#4xEN%C8Y8l^rAHbJq=z?PGGG9bfXu1enlBR z@P8aUT;vMWc?4(A0$h*+j7RL5;(SDK9-75pfb$WDKZf%t>TBY>hXYAjkVk`#{lxlZ z5Buws`0x2T_^&>S;%D#pkNzqA51ldot1qJEL(CIDzZCyN07alU0{l+`J0$+^2Q*-N zK+Co9AIP7)82O<7N2e)O`NFai&>u=h=r&LQj83?G2T=?lQAjL^0H$a6SkS?(t{$-< zgIuR?HNvW_h&WaMHykQM!mk`l0`=-vN`$ z&OAJINxeH$@taJ=Zzz9>DE^NEwdtaaSf66XYdqrj@5byyEb0nGwZ0Lzet`Lc8|gaL zOYf_cZ&(@2a)Ow!v8%^fy$pVs2;AeN>Ni}2fwLL8SDSRmVt@wmH9E& z|3ka}%r5;EyPcKpE729MFw*xH+fc6Ba7}ix$KOm%3XT4rG=uAr3H6t={_A?wAN8hb z`P)oO-l*!sz7SP%I)$yHTyA&4V155Kth8a_*g;l!qv;ajzY>$eTPuiw^oVN>J`9}Zy8 zD8O$18I4o5S?_Cb9Rkl@9r&NsjAQ3B3Rg|lKEYe5WQ0SoSpkT81bz=o z3z|e<;(A9zm)nq~-h*7~)q=A@B7xdTg6+iLK-&bXHwEZ_!i=p^=VF{XgNGo+BzYV8S9~y20>m>b4BBkYJ6b&Dd zGu}W;(P{DFf>pw4AES}*<#KNeTaAite-{z(w|4IbZ1p}gbTV3dU^2?=;ExQ>8*s+< zvw{XRYX>U7E(Ouj$d9D8hqRfsPfXQj)-)khvlD_Bnb7aOuN>57ZiNyub88brvk^TS z-_C4A^M4xF&P7tm)~WjFK6t8C!_jF7)*wp*#vEw~IJI*TQ3CWRc}I) zYn#6xPHKo3=+@*a&=!oZ31Ckcf0|oEZ3Muz_R~kC<7W&?zXJd*0f45DNyQJlatHcU zvQ5h<05qnLVdm>Rb}SGixD(0!p+SSA6+MX5n{&{tz4&nY?Uy0c!XhwicLN2c-<%aq z8yc53V=~IV8^8sAG1o=WT!Z6s-MyV@gQ95z z9etv^oRi2~TG*goKBR9yl=5LQ>qqe)0s&6~5l>D=j=Oy*=kCw(w)Xd`zo`7ARryKu z=fivW845g!f;+4RoJ0dU0F+rRz?=@$KITXH(DgPi+0R-dSwgA@E1ADo4ZOPb`Rb4f%+zK_UX@(Ywc4Y_Y8f}@r@5cdnzGP7nZB9K6_LGD^d z#5=k2sC+)772!7E-G^?vpx5?fD5$ZGbv4K+#jWyuC=JEPcCJd3@Vy@*_b>lERr3P? zB$_>BMjZg;tPk9HyBWz}lns`=on@D)Z<_f{4N^y>VcetZzd2BbPro0bCT>5%My>_d zx(aJt#T%{t2o1*MT5CVTwjusn?nl_J_9MI&-H(6~^0nZn0MND(XnFxga5`^gut`H$ z0N$rhMo*^yjQAk+|628Qs@K(SfPP9)?4 zD*J&Avs(Bz1pwF&?l$W~zTK5(Z~RjFC-5EgRb#8P2m`?n>}=I6{Sal7#qEN8o#dpH zy)y~*vQ15BQxjU;3jV|~zKbZ;f*f}{2jaIVX&~akAez8kn?RSXpiB1Qu6E=DL3e%* zoJD89Al*jr#K3l<%+CGz{}d&pQ!&YR(jVKPBqe>M0;?O%-hY4A>sB=X!TICr<;9B`}&xYdM#X$6K% z5xm5h0!KTyBd_4qoq|^v#qf$)O1vUA16!Mj;rP0hoYg9UI2FYm;9uu1;*IL}1cf(X zOeKv#md!D|*$ljaoGRHFk2jdGh|-@>^Yq*-5dUbngxdZ6UCeHw8ZbIXlUQs0Q1zOaJ_vxck@iP&Gb;n!a zH?QD7jbZhb(gQ{GyoVG3ujC(*3Nj-|$aI>v;2)qM5r2WEb>h7fd|c_NP6W0J@ie$B zO;v!cGMZw81W4qW88yp?sy;n z;AAtP^xT6oMXn<6-7n++b5)LLfGCG@q61}jSNy2+#cQ0(&IBLp*oM8wS_ZH$@R)Sq?2CmU9wV zNmHZ4Do5)50Pn{Vzn}F1aRg*TE%OV2ZU%Jrd)QcXV%CRDL=7GIpFyPi0s)F;sSeFh z$ci#q?iWXq08}G3C*mGRuJZ^m42_!kniH6Wm%)1!@7?7@mr7oD0)uD1Ms#~c_UCjB za30S*j`ct1Ti6qQwHAC0Uhmaho)-L9dcbe6X9?{oEX#hj?ze&2Yh2^TZv4oEf5W`$ z{FyMc>*p8I+{R!1d`@cdFR+vZ0fjNH;qWHnXW!RLq3CAsv4dQvYM1Zr@93gcM}ws{1XGd$CySL|b8 zwpXuiKtMlwu1BCg*oI%#goqW=f){!?-R{A3 zdmcm8EFLeH;>ED)8pKKXf09(z36IEQ5EqKA%oyevqI2hX8BE;&!TEqsVbB>Zra43nHw#4R- zt%+vCWQCl0c2%$e&Q~HOC}y1h-9R;K{AuYgRbW)JEI>eQ+5B8=!G`?1|LGGNCs z?o4U@hKe-ZFE@i$Oq1Y2ktvu+_8LK{IS&U{q;H&DHl%UH%XyEm$^O22-F|Ko3RJVp zec-zT597XxdPO4wMc-HP4!>3}P$J6iABJD`s`2%^cm@Bcp#;Ex1OBVJXn76r z1&6dl+7A>-3N0VfZZ3QGO(*oJ{=sJ?H6`=`-nEMx(x6No*s5I|PTT3(R`$L#wBq;3 z5IGP0%PPFXrJGM64)R?Qu(=v~#+NzE;7cRZea06eI?!S(IA~T#0o$yHlatqc2ICITtU6wB&4I454t@))Yk> zcg{%)g+u1^Kz<`gFv#sCL1_>mJpxS9lvHv<(~ifw4NrMGBD2s$RWdG6z}H4rAFNt= zj0%o#>m`QCVIe(zDJFF7F)EnZ>Vf}97IUx`mdpxiQr4hIC*Vw0Q7br|f?;+Dzii+C zI+|pf4U~Cu9MJ9L1!h-HU=xY*dazNtDVP}Cjc|RCx!DsVNOINXGMQ)@k?Vhhbx73p zGh_)=^9x7G^_lP$!)vf0Y~~WRkiv2uB?B|JlAy4Dn}*%9JqvIDzGdqcrU)k_Ja|2;REq0ixd_o z)u?l+Quuo-h=>uUiy~kITO{0qvMfRY3;4a{TF$uKiO^5JZJ5*=oY+Z~5{xj~$4ymb zxlqPpZ1f&{g@#;asFJb3Sx!9(Rp1M~oVt`@=_PRA>i`GNy$;`8H#j$Y zbLrctt-dS*Ca8*SvqHvbx3T1Ij5ruXvOIy2fz7Erl^oezKoV8$2c2latDvCSw1VC$ zTJd}8=SAB)&u*_7Oyj{5Aqh8kvPJ%TDcMppph1Q};9mbQ=}=%5`UzoW)(}>q?@M^M zgnugGjS{|1!VL_U{hZ-o6~bnPl!@{VE@gS1&&g7nkP<&)|Go%)j2pol7bLz<#k=}e z4TW2KBDhbL5&6Np7@10WHS-)vx`gV3wMgb)=3!_ySWmO$pVD1Lh(On*gur8!daP8B zkb2BkkGs@kA|AM<4TZuHAN$}QWCj@tT*tj`1dYpEMc4riz1ZDg$wjuCu8u ziJ7~&{ZqzrlcfZAmh{bjTO0Sb-hfSZ1EJ3zca{>*&ze?)(^QVfjvNOAMLF3G+PEXy zIOu_VyJmPb!Js`Pm)~Mfi#3Gc%{Q2=nt--JwrGY(S&o1eWhwGsQHg(IORV%SLInC2 zm?F>sFx1;oPrX2%7#z2s!-m;t)EdPFV+B#h0E3PgfExWvrTN(mhl%C=RKAsA@_1C-W|EY@vw~uM#j#;?f z7U=4R+fb7@_$B8XCh;UR=^M>~3XVH2R%61*>?es}TJTe$LZ;xf9*_do0x>~0mn!|% zNDVnbQa~f2qjrUVAW|3v!ik{gMdpj99GrsEEUMIBv-!39SlWD08+R~DkDYAu;nuTl zdhFEehF6dVOTKLuG!sTK>i9mWLzl#EOe>CpcD=1ANLUs-smRA7fVxbo?0L4WEtk)N zQC)`4;xSk~($vGF9!Jp|q(#)DNg#C;*JLGZC7 zo!s2_khI|;)^5iz9H?fUP$P;tpTyGAbaNx3>P3E_X^stK_Sltiu`RCx;ZC#?dCIH# z%ifoQG#L(TTtO-BDB7#ukG!p~ct%PiQ)N!z>jmBDacq~#R1|BhU|_fuRnjk7*gJ|j zo2lpOD>xE?V@Y#Hme;YkAr-9FN}qFX=Z*u{m``3td{dapU%maYBO;Sr(rVr1d@ZoW zjs2B|^wb<-N&n26`rvAm#y=a=`MqH>c7!gEKt~_VB!yz$0I`meADJr#V@OOhjRO;8 zWVim+Qyw{R8$><16y1=F#`$*ea-|xrpwJHP^ry7m zksz;O9}|O1E&?I2>xS?tGv_>gOU5p3^t*`8K{VV(==B+IYNI=|-<|V{zA$(h8!Uwq zUD}=Nr3+wH>`#~Ad@hVdc4*OT#8^Gn7Hwi{YxE$Qu_?KAlWj9ASiJ=ak*E3!l8}W3V9z|uu%FJ%74h2%Wtk5jO(dTiZSLQ z-CT=+wq{#)xOA<8QNuR6huNl&`6{HUHy9QC;K-*`n=Lbt$N^b}spz`Q zP8>?ld^7T|P_WNBq6PoiP42*v;B3lMEGNkC&0KVc$jM3XMGr_kTO{$MyTDO2qa7u~ zYR4;P@tBHRysZHn-Kh)AOz+F6-O{H`cTiqreC>)lG3ADDl}hA6dW;_!f_|9oW!Y}b z%yWPgF5@+GYkhDu(1JzQ2lJz$@zKx(D?|pijCP5Qz{3_yT6_W*ld;^K%NNX9e6;33 zvQ~K{@R6%)ZUqZP+=(7>Ig7hT#R{~`=n8y{GOAgInKf)d&Z6$0m{~~+<}B(_p^ENN zr*rdy)CD!4pm93`@1x)qEV!mMx$Fbi(47IP#tkn~Z&x}4)dT@w_N+?^R1*q(Iauim zR1*-AVpI^XLs{p5w29K1_)yi`T{3={<`n=FE-rz(Qc2)rQ}R;J3{(>>lIGkMs3smb zOK!8qex@@ZsM865W)`2)!#Y+2WBk&nCax?xHgHonDc1a$4`0Q4dpzF zdFr=Z6-1^k!F)d)oAD!PW08NH3nP$AE@=uAfSZQ!rP4n7Yw&w8Oi4l$=fkVXm-Gf5 z3wf;G)^`SEZ_&nW$v&jzAHweCYyF>^H#)Q1HD4p#R-=;P!c??{9|NP5zN0PPi!dhU zk&1PdXYrCDQeAN|v?iJMD^_!mLDkxNA?loqj6gR{WkX%%k|Py_q&H-=Ppcu;LU^!N zeajGGGtK94 z@&$H-gAbyBIJ?<@Hs+F1!2Y^+SR$KbV*F{g{MoC1kC}`j%nUu7r9$xE_Fab5JlRiB zNn{rDi;--GW-v`=o+Ljt!m^(*PR%?GV*U}xZ!c}i6Z0Q{81#_TdZdGDbHRT2AlW-& z>yi0-L1Tnb6M19no{ZOUrl7bvdz&`)i0*GtOJiKz#7&#J_};-555v3Ur4{>k{6ud! z^3k-d5C7qrI_C~JxnWA-_Gx)b+)Q*fe9uus2N+%###|1no9-oQLD2NVDOv4~i0-Q~ zukO-)8|!`8Q7H1r*QEP)@Bbm*aMV{X-o1Y~f{-_X;(d+>zHj*U4fmyM3;zj`<;BgI zTXv+?3~~mFn;b<+Lu=riZtmGgf(tssw-J1cr+&Tt>4V1oPdO7&Y9VQhYXiAsDIavQyUX)hSNzMZdCx1LAu9wRAq+F z#$=g7t1p&G2xxUa;}lx0MYAKHlydJT$vR=Zd?J>WG1EE{n=<#QrXoBKIBrTd;SeA@vH_~oIU$NsRdksWt}HvPNxc?3IG zKQj;SUx1WA@peb)#hEyRx|`>f)?zrjMqzL<4+iH^{!|N8*x&!H(u-dLnmSrD>$%Mz z?%cLJi|XJeNL%Bt84IUy_+BN{z{TI^t^b9c`R08e;wI!#*yf{$cXS+iOI!1rUa&E6 z^pZJ!UkY_;j@I)~@CDjaHCiQ{fK;%hhQDUlM}guRaMSPOy}Xn8s`#UgtV1u;tMEuMeCzS>f=%J!HZVH$hPYin zn9+CzDPjYEz=)9w^xYj9!-;=?bD$II(B&w*-nWkx)%%+G03lFd<%IO3FOdHnd4F1$ zu%;z&$k>cSt0@He$fTjyVcf zmN#WLY9{7Dfs>7(BU~Cl*q2;2t*-hHKfG{3LEEkf9EoISmHRIW)_^G+*~S>R7FvcL zUxDdQhi0zFZ=L&f=hXVV*OP$ed9S-$&o_Lj2DeDmxx)@5gqctj23S+Oa@|rx|HK;f zta81u+3@cpJK1CSYIR>@c_)y=QR2lIGVl_ARKerjaN$tr-jRe2(mRs$IXm1}^Xx8L z{?Ea~B^e6*6AJK5 z=S|WN9@&|_LmRha19)9m#tw6~Q%X|&hhv*wr8n7QyI00`myB(d8r!D$u}x1hz_!5_ z(_g?)>p4l+jPbwd^f&H*{R|-AUm%|bQnes|If8ZWZG`+bf&8|w33)oIyU#h?zrFY> z18(bJh@@|bb#9Avu5nua2Gz50`FkQu_k&n=8>t>+rF1RzMLh?!3oL3xN!r5MSV|MV zV)&i`yFJ^4w7|4f|Iy%A#k-C9@)08P9t3XW42tCN*{+!J9GTXKVGlO6%A7ZvtXNiC zhN%!%uTmLOO!+YYG4kpI3Wgl^Z74z+FIa?nf|* ze7hNG@sdQQFG6hJt?0b3(PHKZ7S&61HFP*O3_8ai%gU~8rt`QfCg!L3k|`mJEcqSo$Oyg+Lz zx*Wt1xuKE zdwDJKT}az};YX7nx&QPzg+^az&UqOIz85}`%x^eq zmEUBXD)T022a$h6&gglai)>A8cW^842U;<_Ih6cB-vit{7`L8ge9QT6aIf~%7WnXm z@5jyVG5$6fp{3t~A}h{gA$4*38eA+N#qVDX3W5cPU(8~HN0wdr0rxGXxT{)InCTne z=<0fFayw#t?SbMJN6GDnv|9lD{=Oz=uVQv3Xl(nnkIV>{_GKaSQ3zn#fI}s3O~x^; z6d!*0c}f8eeNJkCT8^UN+y%}o*rl$57XM38-=enuEc_=2 zm{n=ELfHMOztvrbo_q^n8f-!qivyhxlA>gW`uZfl#1ipE<_c!O5JNpl<49vXJX9Dl zEMvex^v|HLL?E{ut=}_E$qTbmWlCcv=5<@yeuJrRaIEDt{7{T3l{1qWjIb8KWA?33 z@Sdlt1Hun(g%M3r+3FP?e^+xd-!LzcHOO4SPa;QwqsR|_DsiJ>4a*`zdtK+g)JClBvX(i5jR>9T;`%3 zvpNQ^?)D5lP?rv`59YC0{I!m=EEcKAS@ft;L7>8*Sw({;!JgTFKT^odh)qgIslHN4 zu3NC2p-Z7E9mK4*p+Zm#GAmm_+@E4(jDlLDa8=|fC_eGv$%Vyd^|<6av4$7|d`0H< zj>qnMqy#O4ePvW|43#D!)>&V{qtGP@RjiP^P^X4fj1K##(yL3gt&6lZqL6)?i= zS{P?`EmSQwu=#aOJ8Z9t2?Uq4(Y(*CSB#feqKCZZGcXfArOV8jNA-$1lFHE*Lv4Az zZ>^xrc~D2<^y%Q?QplDAHLd6B?M4L)16#|Rcfw|iD`7DkQk9uCPxo&$Dx@BUt8i-& z@@LfP{w4Lk^-}u7kn`+I$T*eF-ur+@Rh{|cGnoMf9la9_ z7&X>d(>4gT#AaI}Q4?fBumsQ=8(4zw)>^aLe$i$iw&b6afw^36j9XCJ(#r1IuDhiR zT8O~{W&$MvsV2Y|qoM>voH$VfS`xq}zt87A_f95&w(EDFZlC9u=gHiA&pr42dCxiT zzw@5=y)4p2QZv5S2t1`VZX9_p7H$FZ$1cl}2~c@auzzH=2f1ASnpkJh-&_GbfNROM zPzlV^>b^V*b7AYw%{QY}+O&w7;^1aOWZ(P2V@~G*vL&&Lkv~bN!kI*(d>4VWqZ+?{?u!NAf-4%- z@p9~<-~jYoFkr?Jk`H!aEu-WWuR5?>jGH#2s0mXt1*fU!?FBE?v1rT*ZQd@}B72{K zn$alQqNhBg?}SJVUDuMD+RC;Xv}XyBCE8uT5X4~6zY(wpJSUM`lku#&2{bU^HFE2R zv;?h|uvK2KX3oyqV={Bzmzk3?$$$nAa%9S*x_6SA)`lA*JLdZMvR->izb~xsGl6je zDB#v+>BZa-QE6T&NqS z$colh90QpJjp2ueU||s>15wcH=cp-$o;-*ega8Sk)d_grFUi zoeYyLvXt+X*`mF3&?V`h#cTz^#@ZD03nYwt&e87)BA?vqUxxx5v6;h(;hrHHL}EyN z*)aXyx;QcHB*Zp+T{V`L@n8UqKx(4u@XryaroWUpod!}mn>b-I*gC;Y_W>+6eQHXe zPr(0bU;v=EhyU{MXQpj5N%bhlGO)t;o! zY=?FVi}WkdPE9b1z@v-CAKIxJwkSbAb#Nc_Q=LQlsf`o-ZK9vTgsF!Jhw|GDVG*gN z>g#(Y=ae@4RNpH+w>Zrv8z|mL3lGtwxPHnT*F7far}h{_`l;o>W>7!o&kp>q`v6;3 z41(x2vLBb`$JK%dsTS22zc$0k!OO&S5@-hT#(c=B&_d-+ddGhUY3?zGBTZqZT!FShU@(|NOp^HCB^yC zM>hL!68%wMGM`z%{*%WS_TOfozbKmIr_7~Eb;u#&Yfn(_AiloDy971Yv3to&BXe%Z z&U}OV44JQEn#%k|)Dqo{%pi@opat^H-t$!OE2gP$8ZdjKA-jUxIJ5!Sj_ooZq7UB7qRzu((#elEI z=uTjZ);uo3Lae|IPP}HnsxR2gOE+GlQyXB*gb&QyU=}Fp2<`=ctVPkC?o&xv!l#lP zKK#1*$@JQtj$X*aqPDMo9jFfch03UxpGt~n1LuW3&+Cm!ynC5=K=uvFUv}ps9mxA- zC|C;1GmUv4=Ug6mrXbeaz}C9kSYMme*CzGlpQk=6Bd`kUv$CO7P+>21t=-=yF~dGb zQM9|5yO=wT%2XnD6T^ZjK;Gdih@ZggcV{>puUD>BZ=?3xWb5q=yhW}zN}FE)-r6@x zo1;rmG~`x#9=p!ptS#*({GiY&O4s39<)EGq4!ldx#|ViYya?HWQ!hO4B+*tJ!q*mp zur{|4q5~Fq!br7)Ra#~ZgiXm zZCulw-ljFmK9`y&i$0Kf@?Er=g#Xw7$SHiDDM|{YdbLM-)gH^TKB@TRPe3mO5Iyoq zF8~p&OamK6!yxPl2P@o;swLErA|R0;vkp6c>*8)?k-?Z$llxLqV2-imCAZ%HlRl{1 zAckPa>&*ClVCaKqJk?iF7#U{?Bb`R&My+wnsN2^%9n)iDb4u4GiXj_fZw6Z{^d*nO z`Mp0qr_f!!rb%Y~uOPh3d5R`(d0yjBQDiOjHN1s}kZ_)WTWZ~WP7m{Yzd%!*WfAk&7oxQd2IIQ zn4F7btQ+Pg5<)UmB2d^N8CO2@5*s`Gxiv2pINVX%%}!@Emu}}rSL1&&{%7O=F8nJ7 zTKxjQTflt*ZvfmpH-#`r652AJMv*Se)vl}6eu}-AW!NXhAr_xQ3pYqXIH-GFUW&Ht z5lQ!qT)f06OhxBii+>QTNV{k8_ktDa_bmQyup(pB;(rKMWI7lBeXwGpb8)dzn2T(q z7tah<8KTd?Y1(rh?YTS{2KSh^JF%&fwHKSYHvj#!v;0bU zLjK(#8b1Ea$%s>%b_o7o5gg|(mh3!T&~d7xABg#Ys~8xw2bl6+eP!XV(5#?83dDId z*nbOZ3_Kq6w_gYy`G_z|Lf>v&4IpZvG_2L2f6LX_wjaS1nDX4%jCG-fjsVHm`Zsux z2ndc~B5VzAbbOUBe@RiChmvGOP-1Y$G@+?BzY&k823+P0O~ z^AS$0m!mY?VZ_2IqiV%kZTzdtS6nQK#XVtf5*>qTAwL;Sf4fWO-e6Ia7Ggvl+cj8% zd}6~lJ#qfiyMlkeMRBZ&9iQLa7y*!=`y#G|S9Eyroio7AI}0*Bgbcv7a@-?_2pIrr zvR-)*F)IF)2$e?;6Dm;)DkX#p0xTpzrI%27fZzy;>+sAd;>&0POW)!y}vWrN5b?-b`}A=qir#Asj~b z?a&h3f8tLNS?}RdX*S9f z3iL1_*~&@xVE#a@r(Q-d zYuuR1tWyFh+M}||+QMokz^1HmrBB`z;|=x@P(sfH4vR|Gi`%F04fY1`W{)Zxt zmHnY}AF`^lnU4feVjN8AYct4{*ARdT>IbUJQ!!KjwC(;$vF=!2RJb&0M2kq zR&A@S!9&YePG({_IaZ;HFTdRd11A(ak{=?nfqBR6Zne;)D9l-)&W_Vggm4Px4@2ZBNOopUmU6-Zf}=n6s1W+)efV@ z>arBiP($Hb*-YDtXOKaU^Hu$H)I_Pnza)oz)@S;wE^KF>j^52CSYEx)Ua#@`p(ub2 zE#ke2lBm>&ZBx5AREqN%syit|6*E6G56kI|=X@7R0lQZ5FA2;5>4IH=A{GlEnZiaM zAM$znoOixFMENMm$4@fve0iyS#7{Ese0k}7#7{Ese0iCC#7}Zw=K1YYf<5UVJvwbR zeP-dGvi8#Uf7WhVeio&e5B@253XdmXu!RlYTZ7Fmn3BzI5nd*(5K%s{t$-7p&=S3* zJvsuTiI9Cc{x0p&Qyf?h2aJ3@*k;E`5onkyyPN}vHyY^CJGAvh2c4%}FbgS)qM1i%Dn{ISVc z(ueyWc5^vr@5BqFE%-e^;O~FK-ya+K`qN)Palsw%cCMDY)y?ztkNiFAiY)pOS~i27Ys1ZL z7z`i%?Pb1&l%uE>)%*T|J?lauTg-01jp`5cJG6`6&BYeZ{N1>QzbsuWVWZJTU&B~= zUeJzbK=Q7JzmwFVA|N((Fv=iUt2r zz(za>Ea>?Vv;}EGPWM62gBeaNxen|8mYg>OyWsvlEf9$>?6dL713K(Fi<&ID?_byI z-@)l_vHWp;K$}Y3uP*KCLcQXUyna+Yb*W2_x=6X(h~w#s#1TWRfjYi%nAp8QZ=?&< z6<|9{%>Ppa-$Mm%T?PMRE9`kbM-Ko;A?(gYfo25rxu|@UD)hH_Z$3kY8(S%+4m);u zuWy3Es`;!+++aS-M8s1kt*ODU;{|m;&6Wxi+XIj){bY&{^!F%qAbBbBK!Ba z)R_3LwFLi!iOMC&%pT*wfotcnAcqB4xX-lwz?XYw&CRbycoM?({V|x+M1H}X(-1uULACq0y|K~3)7oz}oNwBPXrp;I9!5JMvid(VYg}OMH?v*O zIzzi2c27DP^VXhXKN<&lHYz-6pd~LKDQxAN_+qE@*$Gz`&}VuKop5P&NALk=S;WmN z#G1Uo5jM(xUl*YfA^%$IB5vzevb`=oF;stt<(HCFe(Uzr^NY4u<+pBC{vZrV5pIlhjbau1(;$t@*?+kzvJa9^|+sq2S<|n*&Gm&5Y%l zPz<^~tQaVF?Cxr06bKE8MKrU5D|P ze!+e0(0sM|T`S&((zg(Hb0#hy6F$)VK91R)#2G+@@hdyYvs%WMtX_aZuWU0`WDzK| z!1vw^m6G-(c#9f>9Aus9z=x1M+@9ge#p#%nEs%o$f!_z(D3TqFd?z|u4!ZyW_}orX zN*I`Xj9XKU+tZ>WV13Oe(C`y)IakSWGsF2XqO8PyBQ%}vhJ zgAM=6YUgK=SEo)KiXECvL(9bTH6Sn^X&`g{O663vT?iwKCubke^7vm|*nc7?VYz{m z#|0y%%7dH~;KY)_Cl;m}bJC+9!q|{ALgvDNQPkxsYLb&y2VFcbg!5)?TK(sswz4Cy zC`F?^zf%l}!upWAtho*la!pOSf7e9BNi6EcrexR;s7*nH$`x>W7f1a^A$A%ycVL(h z=rcZl;3?B_Z64Gu(*!jLg~- z+p!`-S8=`tzylvOw@e!SFJcS?Dw$v}b#lA2eDu_gcWaNZ~&pHFWR{hI1;){FX|FH>IJ<|6oVrOeJ z+JdKU!7|xA6^T4b3B}BFDYYH%0%v|pdv027QhcAm?*GXaXZhc41C$*5j)i))RokIj zGRo_{*xF(@8_z5nUC{A6A+;|h4j|r`pKkCizK(Gqfa{;JRaXbgXn4w}>k?a8! z%673o<}^=9>__N;YVzU{Xl~4lp9F9a(t0w^{ZPVsq6I}8@VyAk#=7?|8a=(^gW7kb z?vHqnxR3%^btIgs{-npM!XI?wCvI9CKO5bT@SuNDvO2 zpEEn+IpM$J6?;C$?W=o?2Q!U)sk;EGur8>}fl{Md-RC)1wq@Rq-=!1r%VV8wSPYD+ zSCYmJFLKcks2ZLH8XFv=w=n*E>m`s&AD8^<+ijCr!sFR20cy@41Aw$H2N!-6@hSO$ z6HzFoW*bU@DsIr1Sde_Cir6+;3d&Ul)ovI3gI3h~kMdUG7wmSS0EuDWdP&hiyQA{CYRwjl|TYszDbpc}K8n@3uQ0|f1vK@R^+2h*s#7&sGgYRI{ zE+1EO#1&5Qbg$z(KI2HamGl!P756S56F+5MwwJUIdQH+kd=-0G-XlLxF^qb4kZIrH z^twG8bQ2FHRsl(>%vd2`{xpS}7tmCDy{h?E+p_{?+B|I? zj>HxpG&cMnoM(V?)Y$L?xoK|ouf`gIfpv}f47b3jQk~(3p2DbE%p5QRD&8WVD--mo zP}S#MEoU%y$jw?z0l8UY*&RUZ&r+$}ui-Ms;ZHd%tk52l^Dz52TDF^*1!mrb*yrqa zq9^1(ySS<94r5Yv`?TkJp)*+qNt)w>Z33;)?Gs(Xj^%D&*bl{MGjt4a>xq-2M+wJR zN}2dB$=cg@Tm^z};a-|-plAzV1|`HI0{ zm3y`4(vbI6;r}OKfj;Lh#4**{6U>d$R8iQa*<-G}ghqlnuV}MWHt0KYUa7hYgrAKr z>I|nPPeC|r@nAc;Xv+xZj$t>tcX{zXzD~))S|0?J1vaScx=>ru2UG;EMK-T!qk$c* zJTN#^I@SM9-aRevo+3x&UyGd=!@ov0RMsKiI&A)G_1~0yDEgV}xCO9BBby1SuLt zb>=glE5Qr`OJP1UsZj24njY#p`!xN3AanGZTN2b+oGbQuuwYMozp2xhiV@#$BpDC6 z!Ia+Lf3>S}|NXCCxIAr2xU?&D^5L=YO9m(!`tvZX#3s^gssFsa~a1`&T zaeJy>+~X|nE!!1FEv_Qiz4Wp^oclDMZNZm3ulLU^0^3@#A7HYo_Tcp6YeG5?1W(_x z?G}8Y@6%?#sXgbNi+w@tX5sF(ZJZMmAbgeX(Volx0Tk5Emt28^!P8C|^p2@zud&v$ zm)Rx+s&~G6|K1DlA7oFKr`!-O?#g3Bi#yGgNk8}rI?+g*!((FKA747!#d1oR$e5-Wj^!q<-GZ*HZtFj zo1%UTQRp4P!yg+fJPpVVHz2N=4G(b1~e3*|g zcCbujwqTmXt9i}TU*}_A6j3;@fD-~Y0xn{tm^W#$Kc8Yd=!1A zOxt>NYEH|N7~Q^$gVk$EWeex4XISd!g?HQcJ$m6i_IGaa-uoeD4gA+l(VFT(sh z{Y?7ynlppiDnwo0tKW&emM-I;Z~ZSWSMRN0>b1s~fq!pxRd#9XD?8P$*Nb>J&xLpE zi`t#1UXT@5iRG31L*RUsWjj#xJm(p0ed&HDvb(1``(X)p5JAxk(qk957AV7vf^?3G zxs=_aG0zVV!IpYy2F5_8uR)+nHC5d;kY%DPZ-TLpaA17jx-`?u*}9a>kxCW(~)x+}Eq?DaAfA8S5Wz`{&6=s)N`*?*KgwpqWz%Sj(K>kp3OO;7F4H82$c zdWavV_nNhN$P1GPvvz^pG@&fBaEV^D&a7FBQb2Lzwi7$pkOcW3nn1(9WIi)EvJGObZlZos^P5g}LN^Rg04 zJ7brC--wN&e&*ibWJlmQ_CyA9_EkZEZU@V2!m6qzItGFgr1MDkRl(!f-`}rapkM6t z@8BL+YkF`nFR(J`-;aaE&B2{OkIgEqtQPuv)D!&PmYU%AnrdMAAqV?5$e#Pvcmr}} z%Y&-DHvc`7NBXNWY0Z|CE%3%lahS{Ma5xMMg}H3Y7~b@l%MMQ9jSX+BXV`Nx3vV*> z(xr>Bi{kVFj@51r?X4JnZ!pJEeuA4sU{LEfplnw?2_l>oMCtMiwAVrt2vNbA$U0@} zLH=n?y9z0ltdp%`OqJ;isL`m-(-9DD8*v_du9%A+fFe0QST#sJ|9D}vY=45}d;Xut z3w^i;2Kt{kTD600OW?=$fW2QM14gBp7Mf=d%S>z6m3hzNSA#u>pKIhp8Pf|gt-n;B zLqnsgubLGlXZcU1X>s&RQ0rF1WNsz+!RD*|J(w`JfRW58$*w*G5e^nbzeN>Df!_tn zS6Uq*DDhj36(cDb8!JarFb+mW1^0px-wl5wz52@hJFs5yY7cX48QIPpEu(_3Ajd0L z>Ra+l)a#?_HL?A$*YnlukJW3+TEkx7jn|m2!TwY&6aY{-7jKMl&h`X%crDJU7eZe2 zonM1N#E#uGn;)v}@#5&5ke3D2sOH0!aDHZ_-xch?`}w<3pH>9_O`bDY8V_eXwa^ME z1cRHOLWSu2e^3R9t=G-z@*LXE=h~Hc&_ix~LSgDvJI`8`=R-W}FPqB*X@-2rW$?r; zB7K~S?&4IKo@qQobR09+4EVp~H5g&y+aH_i^!0T?L5lrm8C?KzMPO=fxc3x>%q zMqfCAZ{?PC-}dV8lHgI3rOt$jteL0o+(X5E_ynLDqR&-0>c`umH@m*VH+0Op+(G52 z7NV}$2=Tn2D>N|7ZB5n_TaJ&n^V1vjHE#AV>BQ!7fKYf(DIO+%hqMF_<% zuLkct;u92!gMu;Dn?#YHJ zL+#Dc1#w!VwOPqNo!#4LPZOf2Xe#jaUNV*qS!%9%*aA`wxAE8mTzv3lUMn}y@Z0X? zzx@F-mrt`$;l}sm8?#ncGV?`BFqDWfBm*q#&MTPVr(kw0WY-e?GH63=Bov?TWi{9C zAkh-KW-blRgg}VtU@pBI0wLRIHvWKV>cGttSOd|NuVRCB>FQ6gX z{`feCQB8D9bUX~pTX61r$bs=GYp&tQgnE%X(tnj6>cI{D!jLd2N~T*>&5e}!dLAM( zj{wscss+H0=Bhk?2*vMEjydqik0D0vD7J5~hBA;%vbd6la*i9%H;E+c6j~Q2P?Gtx z5GY9K2V<8j0%iS@K6Tsl$qe1iRs;3JgC+2jN$RMO_%(EHkwAdr1V=UI(+JKzge(M- zWa?8WkDQ3hBWgC=BFPIl9yCNk5=h2Q5(HV9pF}dsnd8rrjL#w05R}(u63Seiu8@qD z+#AA_T@so`NXWe*lfV_4BPpB^hOjo5gzk_O@-Pye9$YL5WWtcYr%*th+s&$M^k541 zCyMyqmjy-CU4e!fG7$^ad<2bpbS;oyw}kw$X_SKXpQBME9EmhaFqlQ7h{O`d-=bH{ zqHiT?QM4;Qzb$;YLeZ-gLa&BVDma5X19=nk%91yyK;A42ZXd{LfxP*17O9tZsX27$ zt@!v3qd62fx2NlpnN%jA2YBv2O8LSYTxu;dl z;aV1~Kf`h#8lBa=jlxxIGNeCa6Y;CjcfCKYJwr6No952etZ+ImH!H+meSQARIX zYi#8ra`qXUxO9?t8b4?EOoP%+^m!s0+0p7xK5l$7T|W>RxXRg*{1P^2v5I8l=D^tC z&M(u+o>upBl6md>vUG7383AEF+l;Mj7y@Z7dklLvOo1`R6aOOj^ASKa6V4UJA~r|~ zuHQF__Hq3su|D!50O&t<-K)(6*?656Qwz4!Kq4c0)kG&;SCRX{ z_PMY>%#$T~<~2iS0X?Ohv?X;CLJZ1`;GPNl&$fPKB6h|tibb1Ek1+|#cB8_5|H-Re z3w`&uV2cKuBJN2TAy4FktAc$_j2(9*qtB0#gM=6G9Ogu+#07nO5zH%k%sQvz5zu(3 zWv{aNCmPy+4W+`$+O^m>=sya3SG_U{0|wucuXg8yzRDJm2Pe_ApF_UCm<%Mhc`!97 zq@%_{Rpa*VOPCvq6uO1%B8M}>!%cCmah6lqPRXvf_8rpcsjmjoYPSZ-gC5GJ^@pI3 zr2atW+#i!g_^d0%+SVEilGsgZ!0EPARSo_d5dVYZ!=Y|ylNR~ldQoe<8H#+f{H6=L z%YZ}it%My5!Xx_G-#(_kEkYi*DnDtc1yEK9KDOF%ft0mq1cWoR!!5g{$3^m0An+q! z_uE(mC~TxE?1FPDOjm`4!kD639 z1;Ixz%c6{lJdWr>WI{Vfvz>|QB`mh}k1(V#8^4YD^gCwnZoyA*@blFLTH^wbn41nS z?epiBhWZ`R3#7F7q_mf7QJM#-vBmLH1i*2*_n?Nl2dAQ07gS%%hAAM$+q{METi=k< z?q%D2EN%SooKo*UOU|v5^M2+eHfhirW%xpe&Y24Ti2MZ|XF{(BUbki&SD*v?GiLe7 zanQvHJFcd~$xF}*Y-%F19+AkL?reQ?g8pc(E(nrEVr$}Y(czq?4(G9(tEj^% zfDWfB+gwz#Q$#h#3s@2G&mH@cLL1Y88*(bLt0sy;g3{bHp{3v#R>}t_<=0t$z|!Dc zfz5R*4QJ3`+DPOA)%QfGlk(j_P?F!6k*kZuuC0es+zv7jY)(Oh0WR#vsFyM}KfoE( znqo;&n;E4`-zp?n=PO-gq~IW}3b4Fa{@(KkMWM>S3{#Zxco9g}k9VA^9cTlDw%x;_ z^6AGTr;@Cc>ye_(J`Qu3OCXd9pv<4#1-Nu~;!RMhN|N<+>UV@o>??{t;bgX?eB=WL z<4%!u496y3g+Ddw*yu#!mMMa+m$Y@S#uLw%DC!6tXTr)~Nd^g@i}62 zN|A(Aj^?5c-H&czat!U4+`1D9*pLz~K~yhsX`UEs!eJ^S;)*$?wj22+3OJjN`qE~-9PK?=-W-n~*OOCwz_C18a+o1@r-YYsBOjS?^g`yqr;GDDbw znlrFTX(lBQ$qAbfK+kb$NVuoZA`M+ht~Jd9jCJ8YLg1Zq<)Kv~53Le;Nc<+Ki4)C* zz6 zhd(0jYEK<-MUJ=>!{vM>c~c5rI{PmXPFkt4U<6>ygGWYc5nT_ZzzQE0D9;n|k3ana zejQhA#iCtz;WrbpzZ{ zxMalucNBE%q7sd|v2>k-Qv}$@a;+G94<3?t>Ki3hSIB&Tib1S!TS%&mScc}tjaS@wo#r0^1JOzLE5h>9cn!IkIATbKx+Aa6k* zXb5(ryp=d#RwHVWHDAsvb`krC*!4*8H*6ThE|I=O>|%37?3zkID(x6dBjzVNc=T0d%xR1!IzMY)wN<7eAz&*2g{)W#z;rZ1!Ot)`OB3{e zY+r)@FAa~aGHxu3`agcFR)gsO*g-?lEb9N*QR@HroznlYK*Q%6r!;M%`C}%NnmEuNgTZn1{w5QouK;rg!BI}fAR#Y;OXL8 z1hzOcq+d2hI{QIQ-8}va>hc>f48c~uBv278^Ch_ z>@AHfsfXp@XCA&Sp<|uS5lb#Yb_jG0y90>$I~_?$OYY}y`6c*u1>nR{Uhn1WOnI0a zehm*eh{uy?HAm#WBofQ9a=wcMb-TI+JUm+Z8uGpBJUJl%!)y7d1=T~Uyekr;zlpdg z7xxeBrE^??@!!Ll%84kWB_gH^Hmzr&sYbmN3+rt>1Rs|N-;aNxu0Q*gy8hdLsq3#B z)%CaAaD_lRF>yT6E}p8}6T28DC?oOohnO3`FPYPL5U}KB2*h9r5lI2wqxF6FHt4UJ zxxSo%sxKN#9{bpw=bV!JSb5C6752jT?Al#RHlvtdqX2?;cWiS`9}ZaJ^W0iv$rB&P z;8W4ZHkY*8a|`q7TX)v>)W8e_@0PnS<24y!hN+FkU8n|kgoQm{yvtnPr3m=78tHjA zrUGvx{#d;O-_i5#^Qj=Rv5SO_+jpe4g^#AmywQIJ1j)j&_y#GS>)$L)>NusXUlDp* z?BB1&Yu_rqMk8@-FInz!3MM7+e=&?9whJJ^fxi;;P!)uOASPS6Xf)nLx}g}6t#1pz zuUK|B`sP}(l$UtBsZR;KrCRnpAEGWa4|Pk^KBaWnb)ocx^^5W$0)2#JIn`&0u! z#^>WwpPMV;TFk+c-7^1hLeE#swNu>1ADs6qDF$9D!GCgblt_f<$!vHpU5GlY?^^`E z@$XrreAN2}oPgtSK90=B<01Yx;BovEA$k@(4qA!B;L&O&4ui+DR^l*t{2YmYgYZZJ zdBhZfGfdzai)M2UL|=jbacr@1X{)VqDjA{?mC6N~kos$t%4wRAx=N*TajDd`m<7>l zq_!^gpf>)sE+t;%AJ0MXAYOd_+w?e1(PNlpF24XK{pH`S+ogqS@Wp2Q4_CV`G~5j!*e8v(=N?K54!9n=8vb_oAP2nRzHl?I{!?b!&F1Vu zj9*00aSoaJ;S#v`YbSy0RcAVODExGzut?o4`rA2w|rAwR9=8VC8 z?*@-Joh>}1soeFpTTKCAyBC6$H5REGjFh%m7HCMY; z>REGjA5vSF#pmj>_*^BsIf3kE!h9X#H$7-Y^hVH)zlh&V+w5bf{GPsUZn6g3$gZMm z9?(NawBR(BkH1&k)HZh?LlX46W}#PyLRbZ= z7_Ra4R8Z^hp}#&Fv*BZy_PU<|0|QOBk&7Fz{-~e;fMNJs;w#8(MloQ~#Q}e? zGSv|nEt*QbC59tcso{t`?SnCi*SsSMD+u_(oHlZB9}f6n^`tPqRxskhag|{Iu zy%a3@3(UN?BmM3?-5-V*!BoDe!#)mASol*+cMYuMbbp<4PvFLiiROT_p+4@vsEjO1 zwRkgDcE>o>suy>%aa#S)@LmqO_~?>Pt6z>n;iBKj^H~1GqVQPU3gt*5|0*5P`}g(h zC-$9&SH4as#<$&Y<6w)=xD4AOX3B+}Fq~}d5S@^sJvZ&bB-1+?$3LbNc`DuTD|v~t z)#fk#p7E^(Ijxl^;r+7R#Ul#ZQ#q5We`f^3@MN+<4}_J|XuWp?^U!Cq zzpf7fY?ffUP&C`4`*Aj9MK{j?So{;bTzBGy*eTb+amuU+#;Se`G9Z>^1g_^-@nZy} znzg$R(G6G9L%M%0*$vWu_=H=7*AS9db8=X|<6;-0@H#xBkO7!3mo@);KBZT&M}wnv z)Q9sz@ZSy3Num^X-;!Gvv$cx2pSj|rT2By<1xg^%BSg~ zk%vM%jkE^i$AbHEo8TZ95P)BpBFb)plW;XG`2tQS9_M@L3*3*o+=lM1$N78_Cf-N3 zBJ@r8d$}oULQmnw?$7au`LJdr@50=0Q>Wk?=f^C5j`D?YaTG3!qr%x?SCU_qL=rgP zB5-uq;Q-09AmA#6DR`3K1=ew`2=byUu_DjrcM}-X-@^WdT_MLvQ6*j=jA>AyJw7ZC zn2P0*1Sl~gp*$oi_VwGJRNfJc^6>J2%~&4E1j@q&y`;R5!1szyeADuohw3@pL~}(%5WEN{Gt`K_wrEn2^vv;A7RlV6TD~ z>mt1B)l`|!DFEOBl*+$qR9jjNqGeRB(*ty>AqS@Y@G{b=7q3AO4!szj={F(>!A8VQ z&_W-B!4FohaXjqS2V!M(uDb|SWeuX;S+0K-H|dcz{o+N?8w6HQ39JnyxB45b^#ez+ zl^bGT=C{zS<2=C~;g5~d)q2Wml+`+|{$u7F%I;qaEM=57+@hB@Oew9Y96RV=VU(_z zQW~zrvGom3?NJZfq)-y!{f}S$q z<;c6uYL1T}=#2gypl42p$AGTjP0ng~?8N|_O!Tv2&o>zzR)ZDm#X*X6!EQelKt?}+ z8(7@QRE5I`cnd0xz|cHBC$+j2Q9JL|vn!;9*usX-^GC_n;VmqTwECa2!6&hvQKF4c zZO+Fc(G$GqBhh2eNhOIMyzuP2B+=bNscTVR^i@2ck3<76r{_%49;H7Q3#8Q-Y$Jl~ zJ_G>=j)r?}cz{?4qKBvP3> zY~~7cu6dpp_{7N!^t?a^vNk=#d#qu;$Hl-Cy2mG6_>}N%0EZ)=%0cYy+wpn#xA8;8 zA{hzcF;pNQGkgV317PFKYlioKQSQJ-k7AnQ$L>Hkqt9P}xg?XvT-wE4Vu>jE!Ht@Y z+nJ^;5g%s$<;XwWp8&-zoF6%#1M1cSU_P{d8P9d;1rv>B>*OZeShhiKCY#es^nyvo zbePXf&(xPrL>0!e9e8KV&Ws!$L0bjYT6Z-Hir&rE%D3_!KJyj7aC$U$dBMbPsI5-g zP|dT?kL_V0o7?&Oll}M&-!d4UJ{X=lXw>pmYo50jf30~Qb#cqZ!C#}6U$y29OJWhj zl3JH;VBhf9y0l5%;BI65t~q|UC4ScyzuOVNYmeXUiQjd`@Ak*16 zZ~U$&e%Bwr`zU@#y$kyd5LAOL%(;Z#UGS3O~dM7mw_)L=c0lBbo{(}nW1+IrIDiOYrGCCk%V>**4Cddhkl zD^E}3De~^65L@+zb-0h8kF@(c=Yhx(ud#4pD497$y=`w=_Oz%g-l&5smVyK zk@j_s9o?=wrD-f&&c`hGdz-tG=T(bV8+A55)$@Cz{ufmknvN7wl{QF+AU+>L=d>_ZIi!qV8+ z4f!T=#Jzm}^}cXPsd~mka=2tc{9#PE!1>4?LIztTTMIZkw{ zXxw&>@!)+%Q`tj6soBrrWZm-lH%$u9`xuw3@Vr0aa(#H-04`q*&l@!6-WPn!6+GiA zABU7{!k6RslJGnyF0Syrq}Zj)=edzMZv@lkjYQJ&d85MfT*htpP1SF^4+B{~PHU|5 zePKSd71Nx#dj35k({f8p$;H&~TGJ_;exVWaXq=v7RAjnlPYSj`rQ{2|XXH(+N&lGI zVAzM)`jlKX1&!q35A$GkSOVN+_~81;Scp^c2Qe)W5|{odAM_Xxdl`|+CobKz+3-pU z*S7~T>&Ex#m7T#spEm0ioP@@CyF8p1>M`hLevgr#PDe=jDexBnKS=)eSP7kvq|y0E zp0AH0apwoyzzz*+vjd%d-2Yf#c@PJ7Bk#DKtp>as*z#3w1}&sW(cmk@Re3bJ)CH=w z-8TzHfjEnphk9_+o5w)by)fRBn8l6AE}ZJ=y2A_hUIhnjV4ldWME!l3hcZd_!R(3aT^=TQfOCoY6Wzi5Z2V7l8_84krjXOV75^s>{kBd&|Zr};`+}to+Z4D=Y>i7X#$f} zFlao&SD(ftJ#sFS^vJnPQtbw`mVX@3Fxk5qx?C7zf_6heIIJU$BB1JOwu9!MH=S69IB#uW^_E31)irArBr5MPr&rL z=u4<^nhT1hE?I@#OIKlUM#vO7xa z?BGrxF^Rt?56#YL4IHqoeTT0vdw!#TF!Phi>?SqC_+=W1l89AW~DheZcX zZzOsLz8(6IwbVlYhHvn(k`&Zu#8Ex`;2L}|1d?gCJ`3=GKU)F=qm~bk7jC$_({J<1 zO}c(tiqWu<)AzPiqoGM|(u{^Ja+7W}G|Nqf(a_18$1+%d%>!(C?IhLy=-*@iFt{V` zX4Zzk7qbDD41Qs1GK~k_!K%9*yks_WsZ!qEWm3+rEn_Xy`}4A-#!kaHhAC28wV z>#F(m5OP$hHKow@}m4=FGiD#+-*jVllk(dt9E zgZ*!PC98`=M_;$4wAj(xpJO3(7oQ zjaxxB7$v=6a`$4SS<3?J4afv5`%0*p%C%tAT6}DILMYuHY~t`cVjnQ_ip{?ue=Acd z*{cf?o`V@=y(s<$MQS`7H{B@o8gnvWFFnd)T7kLqp&pA}Eo&hbQ|yn`o|+p51Mf_o zp3`6bNBy-Kh<3d@YtT%)KK8y*m>t?xz6FMQ+rTvr#;#Rg|0ce?>(~fKZSH2g9awaD zdd`{Z6Gp{k)4RDK=R{S|DDh+s#@@B@*)&GotA<6(2hH77K`RcQj-g0Do50ZO^lXxX z-39*^&@^7*`1FHjxXXZg5gP&yPts}i zU@Ae)qhKlFvd6^;Ghjp8ooy@^OR#wgYuTdB_BS&HzCF5F3mkR9*bD}VtV`fe*NiRw$E5X(u_7d1^=ph&E#)d+#b9Wy+x%J}v zDeyg2d{CR+(YF`&Y4}d(cku9(Q`}RDXtKR}D}7q$VOJ&dMXm8Flmsocn0?_|`s(yq zfw%d}<&Vw?ya;1A#OOd%LEDe!_@P5BiD;pG)gf`?-h}8003F_M%<-pap-os>3~U;- z!oh@}(rFaL7+?>;vy0_+tGv`d|$(m!% zoHo2aPPMT+B1%Hha+`Y&0!~2R??(hS%a{E@VC;ov5BuV7$qiP$Q0DhO-YH7 z*b3@`uf`Y`%fSMw|F9c(Bg6z13hxTs={M;M5IBrS(57&pDm}(X7l=}+xL&ugOLR1H zIv2PtDyE!_3|qfyebx5hP`2e?#1t!1i#3wdpV-xQI95!h`WiiVM58}e8>n~U8*^(R zYPSMbFn9Eyo>4uSjJH^j-1jVI)Qi>-ty7WcXq8~>ywk<3T{rJQ8D{+F(cN(m+Rn8)-JDU0PPCx?zj-cTVI{ypQ7cZ)Uu| zCGGmmE z?fP$zw>8d`JY~FHxLWJmi4#-*BkMc0{?o?$r!X%gW%}>qa}9fo|C8grP+D@_n_eW2QLQV2}pwMe-l;a^zsX+!?+ z|M6)~>&b#3x{3=)seYPRL29xDn5?(1SIcvz%-ir@;GH(B7hP)1Yk%m9*yd*qr zh=l(c{_8Iqzwa#nwDEiA-#_d4-G!rCpKbiUdEW8cDlIu{{N~5v<98cw|7ON-2P}~P zO5^v-@TZO6mwxqG$L~pK13%mN1JMr=B!0q46_)U{`eYWvi2L{Q~35C`{ zLJU@V9OWY^A5)Ljy7}*znXtJl}?i zzXQ9Ve5_HAo8)y03|Q6kFL@3FQ942u>UovCPlX+>dJf5ZJTH`It?oexhSX$fb>GDu zb334m((2~&32lON$XV8lJa;6TgfPl_i2E39hm|lz61314Sk_j)bd+C?q7c*>RzGEG`ssaiL6)%Vc%QRF_nB@u*8b z>NNyzW}Xw9xpH9G5a1#~4?Vy}@9Y?WIxUI)oRcQ7NYhqSfu}LH65svma zC%?%tfttfGIatX57~MoFc(O_s7r+s(51L~)vFgGMV@@V(ugK81vT@kD{lsoa25Kg9 ztwzWP0xtL?VvpgVp&6v!WY0d-7Qi9HJlNZ+NPvrdhD>6-ubB;Z)UoT0t(?^G{Il%2 z8^!Vw8iOm2I^g}MSJHhUb)CEHX5^=44yqUQ0uDXo2sdim$xf-7eFCDtpw>-RtxJb$ z{pDM%HEPwWu5*_TuQd;TJ$wQ{)M3>*4+hAe*t_%8bEDMLW!0mu=hPz`YYV+_8UlwK z?4eJl&1dV`i$~bAPOC89W$e3)t|uXS(-i#4C% z2v&L^xI+r2E)50SaQ==oF~h=7Y;LAqo7c!kdIP&L11lRi3U9q;X&6vQMU5%wyVPSS z6bxu61Sj24twC+CLYB%pX_hvrMGIwo%?nW8!2m+C@Oio{O11p>Y%M1#md|SWBrE)& z4qjUOBtW0ez&v7-BVhU8_<0*zi!VeoimS{O7@N19gEAhn&ZFbxNB<#C>}Kmrb)72^ zj}@}y`wW)cWWDFrUaE`!6Z6n&B^{1EEhTNRa;ocGY4s4wac{u!x@u~nMK$}4Fvg;F z5-e3lXd%X=6J2!e4iaopZ^k!-YA8-B{baCbCNOOz>LVG~>SjV{#e~orVIzRJ+<(Ak zDxI;=kjO)8>(C%3wcb|Nc1E%bGK; zg{`l@x2(m{;&hB~IFgbk$i{zJB;!8pCi;6K{bR5{E7QiqGe`8oUm2x7cTozQEIGt| z-Scd$R)`S5(Xyh0lV;FtA4QGdT~^f9Ug31`<|u1$c0^8%!FI3;z_=(mYge%HsEXgM z6{0_|TJoICce}N^dr22(Wavfh*lnmQ;S;Q59)^a${u_9(0!nmG1K@_vS0ThG_Mxyn zBxWPcas%_JJ=m<`85QhC*(X1g*om_%TH_u0aB}9&cXn{swK03D^Chiu=2WNiI07@^ zIZ0c8`~{xC9RD)T%B?SrIzKFX-HB==u`%H^ysboF8;pZwbPklgB=5S%guO|5IsTr& z&lK#ibM>^dd;#__;W(}kka8!6E zp+Y2Mq!GPa<#4u^wMvE2F=032fy0lLawg{Ap>*PI4psDuHvm6>TTX#jtM_tx95?b| z|4Hx~McDPjE*h+Zd|dgZ*m`D|3N+62Ud;H0-@tx-Td29}TY#hvX9GfK^3t^R+np_R zBQa!;fUaeUqlohK7g+E3R)7bA=F_g%)_0;C+f`G2VfXd0!UulwXYJ}25#>hg9tfu&>5+Xpm`83I;9!eSOTs7{Yb(V zA-iKOL%c-TLQFaCfLWnT68p;&h};(KHN3Tq`;kg!4|Ys@%NHVy8@?$oms7dp+x49| z1BO`wZw9BGePw+D2&_Q@=qRivVm__$b#47?0MZ%0s|EKz=osCH(Z(eFgSLLRGg1~& z;PZR|M+h9F`!7NT64b2-;ZGT03+=!@n)@-?C56vGkM`(1z!ZC_*s6qe1%`Msc0sblke3Yy#lX;JM35laeOmTVVX{Yjl-0IZC+|UX@kZDoZ*0+z>sV39_7T<1^WvC zKt1D%=RFd5X%)T*p7LlbR^SHCTF_)%)CQ0r8lw107O-0(AMBxMP{S;yj|Ukn2BCP` zWPYSc6eG-%;)BlJ2$+aqRnC{O;S1ZNCUj{qc8yh3H#U+urgf~!Q3H2U$MS)FJxe~) zU&V2yQPmgVNFY4)q+J&4hE=DdJd<_ir(z~I&?GY-Ya#{c;W6MnT>63GEFU?McU;Ko zdf2zwqpHBPfgXUUcxU98$GH>EHM@MyUVW54ou;2N0*50HXVSk!+!7OS^4(QiAcNa4M{(P9gPQjM_ z3hqzCk_*oVrxYQKC|8JWoi%K}+w>+)?0w2d8I@`97($V;kRxB}104cXVBizD3cIp! z5C(Z|af<$G@Gz|iG(QY=yx<0z2eu~_J43Hmv{1sU+QL($RgE%5aSqivrNC4DG&I7d z+cl-YTmAE#f$}9_WJn~rfwvBziO%c9>{zx2xBP3Jo}n(O>XM=^%1mc^g?cJimvnVW zQy1*~@$)5eS+%(|vkpN57cn zwRfCy?smZ{?^`Kw5SY&Q_$n12=+o1Tf^>a4j)EbAYWWy#{enzaX)lg&PR}qFW$KGF zh1}ccg7JDXUPsxl+r(IRPa9WPb@5|3A>Iy&?(d)t(`g^D56t50E4vOH?>fXj$G5o7( zUA+b&ZLh<5ST)$IpN5*@8t^+}SO&fT*zM7F5JqcpcfT(T2l$>8GsOwy1`{kZJBjfE zaWXo0Bpjd_l|C~qM=#xCrrn^IHkoNR>7@v*JK4-0sRuTgDL6H|&e?_|)291o#2`XN zdW1(yidM2YdwAd%#G}1?8fvxi6BBXxYzRIGQ;C>W2-Vl)jI>G0lE_L6=p2t32FMXfv%x+wl-Tf&!5$(Jd2;&esv{<7VpUxWLVh;V^4 zsqvr}@X!e!`?G+wTLRD!qXw}yagk9PjPMK0x+?l-qoNDQQeqOs>ILCcu2WE}|1Fv5`|z((AwD7)szaZN{5G|3$rsDd_S)4gA)d1AG_yy>I|~1PiSM$K1xx{XVP+ z%n=wIVbY}_kTK>x+@*T6oE>EyV^#rXFtbJc%*I?eI8C|UdAjWMn2mr(tH7i3Agne( z6>b5bzv|psw$pJKeTDtw7^5=PxC^AHv>l6CxF4fB1+JjbRAu8RtdKUN74cfb?yJfo z_iaIMck_D%>+zAYovVS|#>3C@7{wWLndh;yyTtZJ95`z;c89%Op)${Vz|(@Nx99lR zXmu07`2;KXIJ8Hf$DPd^BP=Xv{~B}~b|;t%fX@!27^Z{CJR8BOg_LG_1Q+Nr-T4fo z<@RBAn(i^M@xpY3*qz7^6@%~OoB-dNJ<@pqhb_tu5OhXh2U83(d%2@Piz<7{`UHAA zWjGHQ#o%eVCJ@KEXWD=~I<-)Sa7kT63Ku&$S1h0bi5B^s5!ix}X)kN1w50IT ztg-#}J)b$|97b#)G-CSCg6(-mG2m&pV7FeC~RZEYbKhDa&3Gk z$Q%aHK;{|CQxnknF~h%BrukZ;^YTaVn6)d`ZrkhZ;ew_~vQ~G5w^i9-Q^qPwblD`1 ze%`=wURn1r0RvxQnuQo+)qllZeEc%8y%5%OOp%mL7D{&D1eE^snVcRV&bb*@F$fS8 z>7rX~geIehYd3io&>Dw1JIVZ(GditbC?Y-E(JTd1%F$gWg=8yt4=l}JW7*%rXO(Il zP21GDTgCsNg#vcvM39{p>UuVRP}}n{TMFes;3C>e@k!ZAL3~j*u;pWd6+TBf6yYh{ z2&jO&5eQNqkkdT(({7ldQ&P%s1jbl11k}$FeN%_=>;_nFgO9MM4m%lpn{wvTwYa4g z>}POC)GAL%fW@?8s|tjzY8}bG%K&VW0Z8cHkNBN34*g%SHlscNl^wFJF&=C?dsw>` zZ8gL!O&64)=fmc>22r#)b@C_2CJn)X-HL7vtDUW7f@mQYW$UJ(lDx_4Bg#q(eMSX* zH0N>nOH$!=l{bYR-OT3A9Iw8L8w+q;B1K-?IxwiW=&LgMQnFwbLBY>ramUElDwq&; zh}&&?abUt$w5!(g0iGiR(~*0PHkEnd_QY)gnOrWS-ky zK3Y}fsJ8Is|M{4;bEF+r2m+)_M~2ofTYlSQZT%`X-E~_wPQ5~f?t0LIT7z-J@A&D} zhqT7eMczuqp}NZpa4>R4;8;*fa_8kpkIEm5Z5*;+N4#KgLW0>!z}f;|TPE?QcPbP< z>QIWAeXA4PX4JV0>NtvMIBH~0bux7HLG}w8g`zHV22M~hcq;rb8@G9QCTWHj%tPSI z(3KH9pnJG@Az=uRa6*d;avXU`$qiwWo}@KaI7I|j@&pbQLk_M5 z=K=LdWv_7;ApDy1MWZ@f&wdgH+@SeAVC4N>E?UcXfx_%Be;kjXF#m-;QumTCvGS^* zXqD<8#t1+Y=qx_!EVgC;ti9dJ{}BTIzWb(7I?%iq)g5SFAMX^+`#ou1;V#m=JkTsE z3P(ncrAn}b+)+FtX-hiJ0eH^P8kdZ+`_gMHuv)$-ThIN4-SX$5 zw0&tngJ-tVn)676Xp`-Jbszf})DP%5M_ssxvz zCO!>yLxS0$Mo@wCL}eYA05W7L6Ve&AXLs<3(kJYO6MMp6X%*y?pe$*J7XC7d4sPXZ zJf!o16RUol+|gx~mvt8*T%KSvoEa$cV4GWe^dnF=iYC$&o+V&9lwk*v4m@xkUZEW_ z!2cepqHaPQ7YiW8I^5=FqVslh`Dk_N?31PcKLbjlI*rIJ-B&rOwO0sUdYq7$2H;UK zW6>#`a2A})bIGA}!hLHAe?#}+7vU@MTYa&yiEnhlys?=Ih&&Y{PhjM8#pEs zC=3GN>Tzvl39d~iV)FL>Kx85Pc9$_Yj$KZ4%NZ6f*km@7bi+gVIa| z6G&lpKbSL&92LH<@`+aShOI4i6&;UHrl2Q?XQWx+cJhg~}%aygpB~u`?K5E{=K$m1z`nWQvtP^U!IWx7lW8o!d2mdn26iUQ6(rJ~5(vP6nWayoW@t+?;7%sG_!lT#uy8sV zu9jxZkin{H0Qx!ps*sIaYvWJJJjdW+yXqwuJSJl4N1yx`8Bk|ybOiA3luFN%_Szk6 z`Pu7fNFLSd9>;tXvae7&PGO^bvXZNaQpimzBzd{sL0yZniO3#1C()~%y&e6|wx9G3 zDBgiwY~UI_f{uC#_TF`h6~ zgfnLhS$|F##3g2m@V#kh8JZ^L$xugqSUFrV3{;`2NjFx_X9ZhHQxmFLVpn6)f055n zqq)f0F)*w`nF{8^PIxkqeIr$?)CcePaCRUy>90k9{IOMes#Q73I;o%$x|?lQ8bI@` zhHzyGTf_d!+E8i%09cV}q+2^y3H?QN8LUoD&=FNrp5m_Mtr^DcnZ_p4dV~gHwY01u zP=%1=E)l4xM1-lcf!h6uK$gJQo@x{Alj;5g(rk%C#{U1~?QP(rDz5(VU3MW0uHKDA zjW$B8)Phi(Xl#i=-9R=3O?a_HQ9)=Q<)@FfMcq}jdD(cgbT2m-Vwfo6gFAc7(aDhiL@usm&iDGA_1e&6qzyPE`Gp4$HlAF_Au+%q$0&YU@O=FH5Q zUFf1L+XdO@G%@=f<&>ib)J9Pt_XGig|Wb%9q zwxjXZz?<5zw`kFM@c7GpXyjoGw@-;9j^)^)HZ2b~Dm?a8^%;&ZZ+z@x31?TY)*qPa z3PT}-|Cfv7Gl$UW%Pos8#aC=nT66`T_YGmz;}J>~AoSQZ>f6gIo_VHnasGJGbqFEn zMK{TF#v)Z(HpDVL%Z#u~u_p57EO?!VyT?=+^ZcI5X)ANOalyYcC-|nB(T2YT_ed^* zMGwleHTqV*7{CNEog@5N!^EPOzcK}q17znAvn3^zAEkt<*qAj z!3{nT{>M2KE1@mOLGXiXPKD%B$$l%6E^v~D@N(mVhXjo=ZMc)2J|a%jyX&8=2Ltg0 zI+mcfOemSPyrz+Kj}sRo&THEA+U1`5i)As~tX@89=N-FPECxzz@fCy;Ex{Plu!+$X zk$)iho$)zHIK*n;oz~B#mY;FB>#)@{L~gj|C2NUegJ|o2%AAk&#g`h6`O$akvz|p? z?nzzn-0)axnz6O(FmBEP=<$K>O%2C3An#`f5!K4=4Lw{Ft;u=;o7M^c&VxCBgcpl6 zya(_-^N`~UnpEvL5K2aG1w#CnjNYCJ-Q|Rg_45!i;$i$g>q6e1I6VWK)lZoZ=EK}! zMx~ysl8NptTnq<4y>RWhjpV!f*{hMKHko@RjD<4YecTH)=~rVfhL41Ot{cy+=Ox$2 zUHJ5~t`o>Wd-w%};ff1}k!Bx)W^*o@R9p3$+!w@jxHm|pL*AapbMRFqt^XF1&GH$K z=1GF*#}IeA2Vo*SvtE$Go*#*LxK|;z*)Ztj0^8>lwmVZV^m(Dm^V0%mG6gEhQ~CoV zVZ_>`t=(nZARCvaUVXAQQI6jO8kV5GZ)TW_(}Zj==)E!rEnA53H^P~!kMjy+71qk9-QMl5y#g_6%nld zz>4KFDsu1G#!{^fK4N9f^nIM3zo~79)CdGgACPQFGKdA03L~_c>N11 zyVta}i_d0u?p+WKbB&)yNl?;_{pK^^=bDSJf9Na}FVGLAq1m^3p(8Iu@IjlB$z4I` zvufb;hu8-*!pT8;(_FK$JcIN@Uj;1ccL;y);m^k3Vf-Dz-{0`piN6o=_c8vC;;$Qj z$MN?G{!S)CD^a}5TJ$T3!enT5fXHC}psmHFMO(CWW%Ccftw%ES6rt8*eGq-L3)|yJ zQSXD=+ND=*LPGHhH)?O<;NZE&%m=aT7h12k)hBG8u3Q;SfCzp^;oDL)c65HcWihxtH)2&W3hTXrXEYw<8k#M zMM>S5 zu22tbf+h&|KD+eLN?*FIg$C*Qa&P^~d8mKkE@|y_TQ@!!L_910?x!j~hhO?tJSwoC zs`zq5OT|}9#mz+RO0S7iFsrZ?AecCoWh{J!5RkbEU*Z@pL)~VLn`At<6OnpowGTT! z5ZodsD7kvhij>~WktdG3_`rQq1$P%!@63QcHHkMrA-N%dlPlL>jbbzNn z;C11BS86c)w0RyA-+7#lKCAqh7%iR9K2%yGwjW`0TCUM@NCG2_ zmLm+nH_77W|DYr779M7S!$6}&))(MPc5qt<#-eTdJ08P&1s|=|gZ;Qsp~sAV0|gr~ zo=VA>mncEd!h@`)D?dg&aKsWC%d(n$F0_;<#{4}omMXI-&{c8(UE965g1(`LV3F24 zVk}FBEOEtxTeK@UkjI!=gB=l*#ttG6w8NFOeAzc+0nA{SI?NzL<)pWU2 zb8o-OD))S-8_d2;i3)G_;cC!^lTzUgMt2`?C#TRe-JX8zTvL~}rrVRZJ<38~OYA8G zp(??T`I@K``vQvT(aKI5txFJdM{U4|^36#jVSK^6`z1rJfY;VyxrKK~n$2r4pEX); zWln2zhTOU90{8JdYyGET>^(;=QEgd_PiA$Fw(dIYfZt`jmgpIt`1>$7o&${5<@jhd z`k+puomNUFf|cH;8L_2!$K@5V6@0F#!7q-HFsu;ocizKvQp1wq1Bmv5zZBv~UB0WW zYaD+ge1k)WlAXxz7;Br|!W>I1qF`Dq1Lsii%ejOEdL&CM67yS+MQkEV6b6X{gDh(` zB9djkspJPdD}^rvO(X1^VYadmqsBK~mOOnk0W!}4y^Bu(&By1kG2K@K8v%gL=r2jk z*nEa9(oI{30{~UIT^-trlRmCnCJo6pdrz7k#8~gvw53#d-PjJmOF9$Bh8tEGUy9|T z*Sfju*{VjY0#Qb+QhtN@HP=WRwvb|$_a4||6l1huYqC}28b&c@Z-6Snfbi?xoHYLq zF?uUA>(OG%!C){D>6ilaE+3n6p|rKwEe+e^0_Yvpfi^$I_Ibm}k$yyxii-z!B4o7i zMp&zH;EQ~TjlgdoluhG5NEfS<3@2=7NNe=1N(a3Y_L1LaY$h@>Ez(k3hcg==7~OJr zsW8*luG?~rziO+Nkw|c&*TPtA5zmEVy=5f4v5bT@mo+nfg}nIStJYXXZgKA&+QQEz zu}1vn?u#CDm$bwQxikr1Rwo+wg~yu9?m~odEjBtxiPr{HiyGHr^8j--uFWy6l?J{3o2OELik~B^DRkSr#9~8zhW6Tjp zdIg60VS^HWb?KA&DvO}%#hf6vDB;P#2~MnsUo@NsL^sJv@$vLUr%7AZkhqIDo^NBy#E%1%@T~Ztr>n z2RowBHaaxJ$^*z;92qK;#xz>k7+8PQ)-5gth|41phJ3`9yew`c#g8^+k0BR%cd0L} z%-Pl5)3cF3rbKF!0mFE0-SpCYY}y!uaN>Bj(UL2X*gmN!0!#K*kKl$odE}N_tL#iJ z$N>!YL;|mB!}>P@+-LbRp$hQgiLo!h+%0fq5*R?$4cti~BJc<8*{N`%7@wO>iw`r# zN*g%P)6yib#K*!u&KS84`z-WUX20RtIMQoV)E(>A?TCU=`5eWY?({0x;Pq%=7k8Yg z%#G5#2F1NTm+PLhjIGIF0A>;T38whz=wxfP5Lwf@6~8z;mF>QB+XWsgfVVr_FlIFR zWXy=oL4+I^8wEz5$rLdn;gM^t4GHVVA@thP-K8awpNLyG3naM=WW%Z`0;3XUi|~R- zSd0Wy(<4D_Dn7&N024X_$ygk}g0A#NhLbV?C{m8VSDb&uuQPs2*sSO_r+zZpVpfK9 z>#wvhH$#nj6`f}AV>pP=S~gwDthJ?SUwDn}wEM1+MrdIxYU{9bTDrTrMiHmzsymJ@ z;oz%A;;Y#t?k-O&34z5ANmFzccGh-bM0M}TPDWck2$ONLy1${zT%P zK~~FZL|`lQno2z37TRnLB4E^<9W04)G|-wZA=hkDLz2}P=pCD_7}Hvn?qFeC;z_0- zXtwZSPS5r#hBx+fy`|#xnrxp-b%(iH*@vd|CT%TtyZX#!6-b0zU}nQ#@?33I(G6y+ zPsQBeWSE1#!kl&0y+A+=Z-aOCh{V(rZ9NvVP#Kjh6TB^Mo9uIeaz-JFvIW!n&`j{G z(Xs)onAV4$B3n|w-6;X+x9b@Y{q_zVqcU2akq^*sw@6^j!ZX_rL%-dnzw0qt+7O3R ztm`|VlNr`lLPV=DEY_4$oK`7qjg+?ZDzSAfBTcMl zuHsc$hJ3OA=jR+KNcNypfi+A=&6Cwl4RT6aLlBi`;l5O$S0C?-34HnyYO%W+_;{xO z>@G7VEkoCa@BqNl5#nM~UzHu63f})1$y6J)FbktGn^_oTKfBBFpSSzKX;NKGDU>Gf zjTrhLh!8GTC$>>z4`v(+V>po4ViVC&3bE8prbQ5=+cB*Jb@)s*6Esg~wD<)h3FAr;^?H452_5o`nnXho4xwabbj(p1MJHI$z zasc=AW4PY=MbFu|yiwmAg!fId8#@0^RHk7IdyCAedH(|TYvFt`kMHep`VKt0P96hq z`Q;;c6+$@{#XHOqw*dSvp2tDUZF7#txo>%QGhzX=?|w7Xwe+MErjs!>q}9 z9nUb=$s=)k5&hauJdUA9?RKWmXX7Rf(xfVV(YnJ==H%PC7kNYcC!ZkgE!gnssmn9A zCb|dkEb^-H1(u(j_1N&6%@5yEkvNcm#EAmF*MkSmdvZfCS z0yVB^ECj^$c@Do~o*O!3zlwg0h2jQa&9&mB7!o~hvH>Rj1Dr{Jx`H?nge%W~iR&*0 zCyk9fnVmjM=-`%|)l}F>x$)WNe#QZw8soa??S?$4jCR zwG9Rxc*2*f8n|K!_QotdO}m&v^Fr(s=n0sE&~6|Itw4j!M`*P{3MZd78> z=^NGzep&46rqQD%%9lnTcQ#^vffreqfrlN&hy2NC5MU&QRgrI4w<6XG2B9}2kc=(G zFNx+L8GngwV$EaH_-G((Sa&f&yypZPCCK>b+tO~gBP{z@(QNauY|oq=4l)u}EDE&; zn|*%(RT;Afeq+D2SUC+gJ#lh)qT2`JvDh_D__ZuS0US#5Vlq4QyFh*o(S#O@UrZM7Hj-4S z5}adM%}m<5n7=Y%1PIplo+NoOQ^&7+x6zF<8R6b*wn$MeOYmm4NKq}#5@tn=mL>@k z5vYg~CZtEfEMv^jWrWdI?DpX*BToxU$lh!$TPjJG;5T+OJPZw3GBsCwv<+KxN^Z&1 zmTkdI?m%Ok7W+M0ZH*L(owEf{F_D3RbD(ROxiQagu3?GBJfDHH2H40kBhQ$MDXFwm zoIC+PKm>@h<5*T3%O$m}e8xH&1BM0rJ(%gO*m8WwGHno9kcY5*TZ(1qKrp}%egatc z4ODRLc@lrz(w+0nsrkm#Jfk8X6HKH6-|?Y$d$rhR3_PY{WyR`EK5i!F#;>}7`1XID zRwbd+QS{SbSQUs$#zw%p%np@|F72m|4ypJGO!bm~!HUR+2J28v5i(peSc0S`E zV_|lVxxhXU!(TrN;A-E(Yi?JPR6vSG>^`7mGj?eq4a70sH^4lF7rnI-zu+|x1}FbRn5@)Bl!lq7`vHpU3Eq-K-5gSRIR41^4g z<$^4bpp66POCS&nq$B1z5hNTSEuZ?(H1PH`#2f@vmvDGPhB_67ft%FRj}6gc*Hie4 zh%zlA2p<|P6kTeN&Hm7A%_XW=8xjj`LGq>e@(3T8Efi`)WoUzy3}GY2uaG$cBjjnJ zkjs7p`#R-2zu+hx@*NzbsPjm#A1dROwql1b@s5wXQM%Qb>)wr_SzFc0oZN4_6WJ#{ z7KP!^H5879`jr@tkrfyt6D9L7Ksu&QEq1lcUfJ5%BZ*%zv0EdV9mD~jIQE9$;y4EZ ztqIDv3=)uZRsp{@HBi!dtTA{gk%kI?MU9Zc@zi4c_yidwt!K7KSyle{Vs{yYmfp&$ z;=Uh8#Y@k2jK=hA$0&Q`E)Wt>j;d(SZl>0)#eNLS3|T?Q9>ONAY>uu%VT6MiU;{#E zzQEp0YN~OZA4nyB$hD%xLk2||J?!PkUS=n_I3~|1&$nXa7Xc7`(3w{mb78K!flxV%#$!Xuo?!^5}27Njx|&V7KOrC(@4l=MAy-$s5gnqN9hN- z+p-+r>_^^ZhTUQj{)d2bUXPL?0-T9-}S&3&z|I-u?2HqQ4fxnlo`w(?t!&9+@}7 zPzpCq-pDd_9z!N|b#P=DZ6!I~5VTIk>wV+kI_yr$bJZF%40bH`+T|Ksv4EM!m0n!K za8z_*VW6aFU#yU0UxN&sce^gvAP+Vr42k^08IGjA zhBO7&;eE|_DM2-US^X(eckYD=;;r&OCjMGj7fVKK7cx~6xs zRY7hCtKkgkn@14D(aiN?j?orl@aq(vQ?)u5fs=!M{H%=8(iJ!<_>KwtxF#Me~^XK;;XdC*f{Nf!;}UISj2%5g3m zcbPA`3w#EX36o7OgS~`pj{TdpJPCMbTb8hT#w8lGUHf;~SE$Y=U~~i$H$Bk*{TjUM zb-C=n7*3@VVZIZJChYSu3?ci(ZBdUpN+82V7*Y0FNW{(kgNY4Rqw*x(NtzjtgBp0k zs_CVWun*&%ptX3x>XFDm^<^i%Y|QMG?&W`Pfokk#M?t{c*kyYj#3Fw?ZM6+2gD}iR zUfn3$iqT(Ag~z1JW$y-tY4|dM2Yc!B^IYK>@ECYWX8k1Oi*6{G50=1cTABc6h(+54 zf_eC>NQfmw0qTz!4TJW-0}6t|6M04~bT|OqvKgnyOlc9q+xGpC0_A=*0$*tq77PoK z(1c^J-e`;&F8e%0YilT8u5;mI*(%|<5e@xb{T zmP~aqN3v58Qus3{#Yw?ZGbxrLg)WCdha#aB7j~Y zb@n@9onAcn(Vpy-FZ<=CV=EM-MGMm(xofx2N1|@$kT}3R&ONxNe(Xx8!24_Hf#5Z;kSiUe^uuFIC z)Yq`1WsQaauo(J^#lGn7%s!^ANSu#tICvw0rk0sADm^oT&avc*5$iGLxJGq8%ks}X zX6%8j(!Dc#hw(bm%6XH~Fl2q8t#}#7vXCAZpw2L^8EIB{&F1+W#3s!!9%%v;W8}tA z#x!urgzz}UJGIhiVewYcBx~lSS+Q+qa5^+u#MII6xfQ&t5U$o5S(3|>tGDHkFWz1w zCqkq1P=Ma;dKMkh_1rN0Xk{fM@>BFg) zs9qcGiF^~zew1|Z4n{8anhC&enF!Obl)xonED0`xQ(Jr!QIB~z&~s@q9Skhhs8F&K zuI!Sbtv7_mPfdol02+Ir+pe2b4&R{BcxX%fw!iSKdLUlap0IP{xGoL{maM8aM~bl) zJ=a&D=@uujM3H#M!&ZC{tk2=eU}fn#b}zt0HS+SD3jDn9ohxpC+CzJSUHlz{ao<;=l3En8@zA08ZT|%izVXm|W~o2@=~emke*89DK6QZ0eOC2eOc*E; z&Sd?jom#)g$s~R2heI_I@c>A<0%6c_IUntz<)!VRUskqoSBQYT+sO5{qdP+{XSlE)>CjCi{Ky7&EXivQ~W{weq7?1wUGo*K^!z;anJLl$8tRz(J6EG9u0-vd7yqd*K@{<2NiYTMg%^5a37m!j}?$Odt6A47}tI zy7kNdD#CyAP_Nny{T5V92H6W-N&dKupch-S7{W#^KCnYQqi?14Yb^7k(cut`wPZIG zC79y#k9>*vGxNJnGwKQ=S6$3{7;S1iu_MZp-e(_Mag3(tX2>ykaf5_c4b>7JN^IaH`?o8B%)FcaX0= z7|6kqk=})cwmh@K54Wv@Cc$|&O!HNF`U5x^e=Yond6B7|&w8|lOYp&*<~0Ub%~Hc@ zUaqI-BimA#5E#XO&$1EC>OA8bf8u>@aMxU8Tm_b5aA{W%8zImUnXfFo%$ zKKbv+1-n4v*Gb?-Gk(1Uwwm#qB(TMdUcvxQqF!_gKfrU5xNHg+xIK~mcOJcf+YLfC z{KyBirhkJ-?U;@qcx4wy%JA6k3GD|J-JKw!qMD|+V@CRUWVj(shI6ArhKXO63~=*W zf?e&u;KsDXyV_u!*vjcg5+GcHD}NVF03&w%7TV9}p;DbjWl_DL68f^JkoejYX+&^T ztUn_BTt7tQXvZ>etX1d1k%=I>p#IiBgH~7Fzl@gmi_!9G57XbeRp(73RQ1mwH1}Ue zXn@*D$Oii?It|bo@54x{w+~G7&_l4HpVDyGI$cSN1p%9Gyq9Z9C9QD`;{JsO^r|DP z8BXf>8>EU=Hz-Y*A~f77cx1YChJmUChw#6`KtsN`rG{t^)BLZuXQc^q2S>rrkue#B zHq`vftTU(=p>)@ZS7tr^LK!x^|&89bSYK*&`fO0Ro8iy+c2d%LM zabF4vjGT#gQ0qt1wVs6>K#?=Ghk3VvRp(2y=Fdou&*6mfG#-D3SqP&I)U7W!+I(uD zX&;>C!1ud9p93@HUhyxNTSRHz%W|R4e~24?vvz047IuZ&&aY|@XZ0t=B2xK(BgJpU zCigFsqBbu%QT2jeQqYqfJn)SVZteJ0A1ogD zVk|O^^DxX>Ajtnqjnlf3tE@Pjo;p|U*Ga2t6X_>QYg_~jjgKyzg*lN@6t%Tk^l>$K zlEXcj;blvjOn-wl3GPN_mifzwx-D<>w56AtK%}R|L~RrTYG`t&JVz*Zq>QdGA{ub zdP<)JFa3w;{?zX-OmL6w=XCxI`n2+chF=!?aOuj&Tx1yFAo-BVI$-9o zQDzQu9$ID&ILz0PfV)*F>DFrb#);}``Gy^pR#avcVm0x}tm5f#??lpBhe^*5GxM1? zEbmxBFSdYVbw0Ee_wm3Vf#vmaXLzX1TI~DPPB2{cPMr4K^a^$USDXtJ((4I(AxLmR zfC2aUwL2wn08Zj1a0o|-Bm1qQtKibzj2w^vT*2X<1;p5eN7a21xICypW&^U$;KMu* z1{myU9*aALGD`;bgqx)S&goq(q&1#`%&wRtD+H%S{;VfY(|az6EHrEP>d6a?+Pw`u zKCp!rt0u>WwhrVQYI!A{iE1(D?npDbaw4K>!%({oe>z*r;&x4KZBQIAsV|u#Uj;;Z z3%MdhzxiUr5!&@_AcrZVTy2OQnV8jxokDHi*bV!Ywcr6-zGI8I1h+t};BrkF7sg^6 z5J~^;vZ!LJW7M&woEpXC)NyPj!Z0mK+(H;Imf&4&Q^)=>rp5$Q?cp$DyyT3RQ+RZ& z82^;URH9=4?M7A-d^2O89Vh-uTvwg`SXBUXBPo0!DKs=UjdAy{dRKgJ7=CjyOy*rqBe z{3D_#Jkaf;C$R9n$p_CP+gTANrIpb>Uy_DL_5larW^L_X(_m489i0JDQAGLPn=MvZ z(sW^Vzb4!c!ubhDlSl!MGy|Egy+&*`o=Lgx4vf_Q{HowP17Dv348JPsJN#i6I4$YA*h3sxI7sOaOZQ*C=m|`%GO%ympz`ei+WqqNDA<90c<0Xo8>#9C=T&fM z)l8lXojhCm=NZ0gAdQF76JCM+059Iu5Bp^{NM$ytPi9w2X5q?ya9Ij2s}I~+3T{L{ zI2xT$psx?ye_sz9udp~80Ii_KZkFa@BYLE@aWEF)9=Ui>i=8iD*$dI*(oEcD;{Zh` z?&|4nDsm7EiQ>qA3=ts~e~0COaXG9M$-WiNrT z8Qc)tiK$(~7D^sjlMyQz0Og-T%@#w}l7J&~2@fNzTm$r5)5pAFD?MO3T242s%3ZHS0DsB358u4HTp!u%&!7bc_Fc_(Ch zmWblWI=<=;j(|l|-!{OA^J_YCq(plAM;1t=&xuqO!?DNaB}_Oi&uFILGpFSn&C3~> zRAj_gFwm#Qqou}1d?n%)%@DwG10fO|vO+qqzYDa6gkO!P>9iV*<1i(jf8W9Drv-W>k;j?JyV zy?j{0K0Eb_p&;5DC5d}H7U4jsx|dRmaIVa($8Ad+ag-K$OoVR>JW5(g>zV~PgV?DE z*SGvk$$qm*N;WG0JhnV|C7TfbXk#;w){4G#j&Qm=2&qvAs_08!Fb?k0*BJ;TNJ7XHTLm8+QCX*D;>ZD!$Q)--vi) z88H->FkT!@LRgEHqxWD>7Q&v`Ou|YSi#H6@L9CFjg>r zXv`upTAD!m%I*W$I*my49-sN3-f~wVjNN_M-6@%L9sG>+kyoMG;yMW^Yc4vc8@wJS zX?RFXr2B3z{2jE+K>ncr!l8Tc?UJp}!RYJKChRn(ztS(rikGFuqichU*byV+{>XR2&HY5ERGovvcCRSdQ}1FW~B<75fm z&?yO(Ojrf? zK=bhd8)gh#wFQ4U)Lc_*F#Wca<$13%Li$(*ph}EwPpWs^*~DP7>P-O+XtJ+o~Sx)nlc4(6a=-#nofJdfcua zGt{F(J;tiXNcG5751)F7BZN^g8v@c{zq$)~jbhMI4b15a$7*Z$#GB3{NNKU)7de>e z?)Reli6>dL0f{GB;Q^_;)hJ;O)7JJZTzVzb#m|G39X~0O!qFbUfUJIV8QBhVYBY)v z7+Sb$5=cfRK0S`CARBvBdq{HJk_?d{{XlE{5ah>kPk^}UeyO^#saSRm({)53k3=6$ z1N}e&VJk2`WAUB8Ed)(z3UQ}>jJM1y)QBG*1`D9LT@ z!%U51mr=q-ocq6oBPp_lGgqP?fPB>2p$p00KT0LL8Szf@*3WcQ5%}=|Fx-_{@mgI% zu;V<D3i%g1BRIpN=Xf<)@DYjA z*h!D#re{$MlyL03UOv5{z}VC99@PP}rlH6<(ePIUU86o~ILJ8I;_zsAiQ!SN;SOU2 z+;1CztibiKkv7wsj-olyf zuuN1QqHq)o07-zR+nm=nhtGG0T)G^;6#y1?VoJq2u1ApzEAo0JYFcc@1a5i(gxnma zs42j)3UVRNxABuRq)9Fb8SjRd8@Q#pRX(2J3AN-#Uq+V;Xpo7`XS~oP?C$WfiS9?hY6aS~G6e{n4`zw4-<&~>;^~f-SQZcpRz zIevUvyQ`=1r*mMl*Aw1~$bQ+M6hdabg}k|JHFCE%!qbPN$WotU9F9`S;D+lFq&{eM zK}23)ZyUtzEIw@WJ{%YY^OBT=GDmHNTGZ3{V=1*AiYhA+d6`8QtD@grwvt8u5SBrf zMJiHTWTfL4Kn5YBbmV=LKSyxNkS{Sd?;*GC+YNLSNM#<)B!5=b)3gO^X|*DZ1Et={B=p z1uHx8i0;L#74bUEO^ZI}viF3OG+A+jj8al5{p`m9l13hf+tT78{`w0nVfXu{FoHF+ zq-S@E#$6sMhDL+o2ZC#p{XF*V_p%gaMaKmA-%i(g1nSIb>1Wp2sc_|pfZob-UF-7! zDtjKavaO#@gnh?A(9b5q&hiWq(!`PGS&w)j!tl=}LJL6t9}r>fnV%xURh=M0TC`KL z_cqo@DU9-xlS*<6Tu@(^F5VH$=3rd6giqY;X0DMgfWd9{|-6=a31rhO)-|ma%3&zmyd~xx{%tgpGD>)rX4t z*~l*YA@p4(eopBU{OWXS?Fmtv?e!!M;jMSb=y?5aK+@Vu^eTCKAZdwEFB`*6AghizkX48%^Ild?jeKxpjknN|g642(AWMss2S~5c;el?H_?`Fix~M9b&BIeL?j` zAEcP@2H^@Lg@9dR!@v)`%>~K29c&01`&?;!-srf~a6{~P{kXgSqSE56_1Jk?cYa};GhdkEZAZhIQ+#uiUhqh; zIIBLT>~H18VqdCXno*p={iG8smto3Ys}E376AgPJ49&ert0n~PK^x*mt*;o16iya+ z`{`RJF>JFzUEy=p#Dw=op?_urjziU8JbM+y6R`Fxo12Tg%wEduJI+giF<^cR&Y&7L z0B_0~i*HE10$}2?gIjAy zGfw57%lxiy|Zc%C3({GE7pP#R>o(3XuK&dH zKj1#DxBDw1|1C@Mi(UsN*dP#>JW z=>XA`Sgt3>mEZ#PrYq8o(y;{5pkc%|x>D6nHJ@k4*nO~Jb1nkLdCBp9THBN3bJb&n zdK9po3|=JSerssRZfG9~;=>KEzG)mTzQC%$ZJ1?p7qp_5cfA>RoeTPGtAFBoW}JEw z&B1>C-RbZfAL<+j{NY6I5T@An2t*aO_1V9jxldGG6sC9$j(boKGde2)MC5vASw%|9 zMMgjl@`U#zF=Sqf1)Rlg#s}g)xd^d16tpCL>UDy#(@^(71tH>%W2f2|Ubd#WqvJ4@ zJe}i9meJJ8tCA)b@2MN8_jqdF#?5w}Kr_xna`$7O5Zm5Yf^l z8nzq(fI1unr$rBcLQK^)Omf}UmBd|p_`f8YRWan|DJOadqvcLZ)!zNJ@rfwax?g7Z z4m%Jjy8zMZc4Bw^H=T5d?^O&nVw=9~%hxAq>ax!-?2VGoNaSOAZTO<2Zm}ca4t41? z`Lr*!y~k#2vY->720crmRh)8Ahf)1$;7a?=4Sy_8bi>lF+hzZxxt-R2RVB3$e0`p z!Gk9S@tC0=n3Y18N`{&xuTYbE#QA`WCVZ^R$NhQ3ql`#D)@JuKwlEy`l z0x?E8QXmW9_PrBSmFA;@8(9(O65Hr$8!$zoG)V=pKSo;{h}N97*A?+is+f%9^7Vh? zXxq1{tFcz!_r zpn7R^+@;VDN@-62dUWaSdS1u9L)=t0Yq<;L&`!Cdfz4Km}BvB>zvFP#a@Q~>7GvRnIk(Ki33D4x%(fa>1 z<*smu3jLU0dt$SG5(;55ek}iWwQHqUDGUPpd?;WnR13AMCJEOuLE{h6Bdqcst#zxq zdnoj>OgCi>cGL$KB#O7H#d`P7u;0Sn(tjUr)r`e0bJj#UP{HMI<9gc*Oo#K%W5Mjm zS*|0(5e0IS8~%4`FBMp5C94P{H_f`z8~1|^;y2ml_U$_)1o-S;cshQt zJF3XeWoduFxc?jiM4iXsE!0N!0qp1F&E`8P2~#}W+B*xywdZA+g4zb$gz^Gn?rq~{ zweOM0>Pbd--+RIp?^EvckoEmI`4QZCmOyOPBUT& zpnvC1%?!P06`?air#aK8-ivuj^()rn@2!DS+X4s^`{`878cqcYr9{W=gc{s|D4yQ|dea~B znmp9B`!GykX89-P8Q?@zln3^&W4{>JI8h%oO`F*Ohe-(7QeN z6jb2oHHH9m#*J44d#!ATRWz73&8odda`)f$_ucL;$2>dvf_9A1=`-)$RA2Vq`3A11 z%`q!;y=GZ1>eWb>`SVrX{N}&`TM+f(p5XG`? zFL0|NZr@P2DM3-T-O5Sh*1r31`g?Bo9>-EO<$`4Dj5KPUP$p_|iV1jmip(+()@S^M zXv%pRd?JT9Q~7xj@Tuv=2T^fE^&yd2b;R=fN~#Xj4utBP8tx7q={?U!4XgUVsGZ=} zp3wf{owa}Kf!c+($Hm3-v5MTpW!o*|M9<)!(Z|mCt~9mZdMv}kYlo4CRqy*f=x_i0 z8Xy3M`t!j#LM*@aX933IkM)yF37jJ)z@-HK0fA?|V(HVFGyAnJz~BMv=j8+zjnucA zz@-3I1BEjlruUoH7<-JWrP66@Rpi2M2n8RA#NL!k&&d@owT?5O|Vc zt-O}HH?{I&(DN$zo1yk*)vkm`jpOzWuwlcdvdyeos-$**->yJClrkQC3HII4YDhDC8)A)a-T|O*sS)O}eth2?r+t5XGo>GC^1^o+ zr|iL$4)%AE?laqWrcE4fF&F%14N`Mm9J~^*(fSVmec?`9uit_2v}6QS}V&VR%`tGFDCl>^BRkRYit~ z3f^%a(pgnIW#p7fD3jFf$XtMi0I!Z|05WIKi0uns=4ixFz+84M=2poG(5>3XCnxyS z!>=CTB}V4(VNUd!vvJ)2Bm|rG@VAlIwGAhD)>X4E#tW#3L-K8o;&%o!URZ!=4AZAX z--~Fy_C<(c&Oa!&rd8p|^t0OfsOt7LOs~2evJ({-^>NvkW-{o3JnLWWfdsf4_^{&) zWd5%UQK-ErPd-I^$+22&0$RC$TA1}*_T^66ZO9ti!i~^sbJiAZV#-(~08PmZ-w{!y!W-==*Ld0 z&5muG|7|EHM#W5as@z$dt@!CPQI43q2B;7;pZ~rYaZ2;Kj(z_&lx@Yo@oC7oK&sjC zcL-Sm$X@x+{ij$H0!c^1f>i7agL*!=O)H;+DBh0DE7y8wY(}M=WJR0^-Q`V!hVy(i(3V3=V+1!=Pk9MK8h^cD{}hep5Z^VrS_@fqMD%e3cT0 zC0MG4(2O<-C%o&SJK*@a|KO-Xop6u|?qFiXtC=Ud-SaBNQ*(7HeCt zAzmxPcAy&2h&O25<1-@7=5>C3lV-pp1bo~KNYplY^-!~BRyQY(4=`TS-~WU+1kP$Q z#4U__ul_RBgl7F#idc<(=W?a&ZTLScUH+K5CKSD&q z=Fzu+)s}?;fme1TN5HYqn#j)k73`0~SNqMcvztaVI4}UO@N-8SW>7Gki$wJ9zYf*i zR4OD|SWzKN1h=>oir{i8(d{)RjHIiH31f^O6{5og z0b%7v!u^taht*Utx1|;p69);#-mT+SAVAyYtx3gT5@33 zt)@Z(>9uin_h6Pa-L2{Gb{dcFB}@xR@7`{e1vEiPE+rJ-7Wy{GQ@2Jh8#+DGBWuH? z<9n+#-_Yr~-YP9H^jDZmj3h);B*tQX`_R*agbs!WE`40}r?cqv208k8(C3e&mpvZT zm;i@leq(|+sdM)@|E<3jKj7%mrIqF+pJ6t$oJaYU{)3JUs>ynej1N~;#|9#d?nhTu z#|EhLug0T`0guak5(fg${lVOKd*+g4zk8GMC_S_S0dwkf;Cqmw=0 z3Hy_s;Arf<%rz$9BI2|Ywh4L33Hbm6xU#HGz|hXOfO=qPce##E7@cqGY)$AUiP6^< zJO|=pQ7FofY5R4%H`_Jdymw^cy#d90>OU~A9fNz-;l1H}Zr_3!G`~}zt$Mi~^G{c) z`JFL|cLx-2uRm<+WQ=6+6J|v;|MA4h9!sA=@=7P9j^^F~frW49;&=!u9ANklzn8GL zpe;3EwOfB)NDw(=r8`o>&nM4@66(j>H~6;ND_ZCU42PFX!m}9Ox?18fTW%z+QdtNP z5%XTJSvMmFcj+m#ZQ;@NM=&^@QeU%4r?)qw^4m2C(hUiMcbQF>O-F?g9E0GkDmV_o zunJZVj3IyS@jV%UR`>K6M4S3ZeoPGhz%(lvs%kdP3JEls*LqDj#j1)&PB$Zq!4V7o z{x}e=pR4@<>r_A3F<1NER(zPN{cyn(zo$m}JzP;f^08GCp1B?2*XL?y?VGF3!1D)H zP58O38Bp)w@4#Gb=DUE{0tjR_1GkvpxZnn4kDJ>!V|NHBzwS!jl5S%gM+iSRE|@J} zZ)$_fn~${Ya$%KOpMh{=G#C z_nC_n-XjwZMv1q-e?VRJUWNPKZ(QUcw-v}ip+8TM+ezf`^C{$f=F?*ZxpDt2axWTH zK{HKuf_obZYX)?f2oy_17q=)K)v>0QBu7N(S z-|-Mw=vfLKi14m=KxE55$^EkS)K>S)9heG0Cv|Eej(`3sGOvDf)=Jg{Kd08@=@Qmt zIctKSPt_z~J{<(!re22MPxAmdwSQ~>f5WM#3zkcWC4N4IWsdpuRO0t-^XW!D@6R=# zj!PiVe7Z>j`RMf=AHv_Dlclk@hQF3{iR|xH&oIGcjHqZ?j*6z&Ho_)NX>##XN=*F< zI}eR^EXqPiLiw=2w_f7S+QtjI>>IB@>D{SwMO(pSuL7Hb0W%EVelVP0QP|e7WhshK z^SfD#E&Z!hKE>GZ;!P5Qv0*6V)XazH_w83;|LslJaW}RF(Z6V)^G;PhIJUYR8cl3h zcm_6I6@PgDkKiVU%X3DyaW`D%D1l#^(+#Yhn`o5MX~o|T0!nn^N2W;#IkeaH-$$?}G3D^BFf`*>q&z+eV&e(N`<25P*; zAKtU2_``@_KNgH+C4;#f2!#5l$osVYCeH={m0`H@fifI#$D8O7xzIx)cA?n#bG3(m zi4g9fy9Nrs-zsvO19LX=IAGVH3Lz|JzLUij=(z^#Lc8K(Ku|yE2pL#Zf^7ts+mJA(X0Ji{Fb>fPp@fm)m z=dra#g9>}JC%bmPca*$vk_2{Xp^pY1$K=hp!E4Uy9Q=_ntJ4@BG$sacN4Z{o1YRw( z?jKkZ3f$A0ZbmEKilI>TrXONGf%66{x``o0&jw^`uezM{d_{c+JwFqYLyH{~$alXO zQYYlifb6B`sq*GZGaKUO+a=Sy_nxDz9bn!a5LfEh*gM|H)=P7IP?{gWCw9L# zs>}FMKn$O74^i#I(GnQwKh%%c-T$?Q<58r#_YN$&n9n?N<}WB>e8#63AR~(7v_E53ibShiiV}(~!*qsa6)gLdYCI zDtQX$k#ygOYuS*KJqGbf%w5?fyqS~68GD!5XT}L%D{rqbKxWnw5MF}6_!lkdJsb(6y21YEwRR ze}Ij30XVm4gQw4StOssbGm^~ug8F{aeH@m2d@tUvRc=>DzY2F@mFqQ!4fGAlFQ$@- zQ{HyJg>^N;@6alD$TVB4#KrH(yi5AOUemhLl>vT3fK$cWWpWP4J{Qe%L=Iw?$xf+_ zM{Bwicu^Kq zML(U?tKQr_i3?R&yntO zC9yW?1cnih*Nc8uC%e25<6-ctzE7dpwBmGZTPMO!)7S(VuX zcqNvQKyMpREJW2F7Jni_AUG;!MvACHL4e_ESwt2KKWU42;IiWni0DVJ^!PjuE>~0^ z<`sh`JQl){bM;d`0xL6ZBLkuD#V7i=)y|32YZg^M8 z@c+VL7Y~o0S3YrkMdahuC9)BZOYCm!sxl)xt^2T-p1>HX)bGOK1I~-*P8=Vc9Qhb1 zU_Zq`kk*V~CDm``48kp?xX!2Q6)+{A@Tlpl5KlD3!w4O6mJ0i`@hC0EW`i|m=zxcV?17%D7q!^E=uN3{uB|K?>mA-~kb6MQKKK|y zH#Q4UXrr;51zO=s zEc&&Bm&B6K`48bkvLK4pX)fbs4rKUHF&Wfxv%{n5B>m}==D#t()F$|hzWjGY@!xN- zUZMDJsS1Jr4l<-PVAnPFP@?thUK^;2pBvp~5z-=i2ZQg+{e<2H;v$t7wq0*hQ>N z-BobenjxQ>uPr?9;$iV~$CsB*L4Oz~P`QBWgD?31-171K4({mzBP~tq7|#6SpJ?yv zAvV5bdtaDNl0i6%iaYa5{fMJKN@GVLY(6j|hg4%fJ0acJt5gV$Jp}Z08XF6)F8i8` zdmDQTpi(NsdCpIz)aY!7&nLVFy6ki(XUg?U-2VGuWX@@-s}wA7H1Z(~zTd|Xz_=Yr;$ z6VFreBcyG{skT9NoczCJ`(f`!DSB`*{2#@>D}8v3T1}7t7b@Ga1w{W8z5j{!otti~ zf4)ComPvBz`XJOnN52}T^s5&~ruD02xfkSjIS!GPw)H7|Wq-EMbeng3t)fnG<>lwy z$lI}DuoA2J_ue@PUjAc8AGieTMkV)n!#A5(Sb1HeaG9S6)(3sOZ$PrF3$|z|6J=d~ zJ^`OXif|#O0?z&)%iE15vDLT~A-3&-!O5T?2B2-YKoo@q`Y5A5A+hS!N?tV_c?#7~ z@+!U2^nce1F}dL6W)KG;h}4!_ff;WF7%mY31RJkHP-e!93={wl0ujIQQeSyu4lmxU zP1%gwdL~Cc(z^pSr_+{2Yy?TBtvjbrDsy;G*|L=a{xP?ft^_3ZGT%Z1cFG)`j*o*4LN*oR?A{>6* zbYq-;&wNHoH7+eTR4Da2EEJ{b&K^-AboQGWQj#6E2A4hSBF?B6e=#J?CocOkf&ASU zL&A0j|JQ&NDUJ5*UEhVt4$}gy@l}8*`@}ya1W&PzbZ15VMr*uWLU{Vt#QNs)AXL*7yKk!DJ*3xF0#VaQ^3Voc|03Oz(QVyC?j047z5{ zv$0+CFD*I53UAAID%)b{tp!b!MP0V5PTQ0J~9FXU;XqKL+&QzCV|Wieqo-k5ORq? zUi4|m)l$0JazMJkyp{%f$fJ<@^QIls5czJe2vFb;fH z%WiQN;KADA2B%>$iYJ50v~t27xuUoW*GcmBnBl&J*2uXW*vq_%TWy}Z@bem~<9C3= z#9N&%K;vg-%-5kr%)XQ1S+X4k+ZfcUyG;+vz@i-P3PymR{H7QC)#`Fh{}bdzSaDd1 zH|$?wqZYu1PbmJV=5-=*Igo%nG$(qCC;B3q;-pLX2&;V|^$ucELx#ddhARu^&iJ`$d~HEiaejFsl8c&9{|~VLIJu z&tHA#JhL3YPbO4{t;BstE$HsH(=Smz`%i;iMZFG$e5U~ zRaTABR^hB0Hbt)o1%idUx@yN56a72`f?CVj6>Y`dVI+Ct;4my3WWbQ#XRo*bjPu)cQ&e)6{o!CoT;DHm)|}^I3w6JRh^`;{2cnRCeV0pHv1x#N)**Z^!6sYl5h#GlxRNFNNd+A)3o*(w3H&*R=FNF4Rms3aFnB-7@e{7c-9ETd$ z!#KUS=Tx*LjZJeNxpL-dgC4Wf9A#ONVCRr@1o4NxbS>mWgJ{}J?K4?Ma}%k`87jnZ+z zR_)Ntb5>?Rr3`(Np-$8pVj%#^r>;z|7wPq07ktO;OTTlcp=_~&7%9M%Z$j~GFZLhI z&K*5F-QSK{oSxzvH55E%s>clV5J>Eu`}BP(HUVy7mzY=y zv3&>S^1<_=gVa~L!(Xvxk5OF34Y^zu{hjkE^0(wf$rKQbZ$dni{t-`eVucz9z0BLz zolgyX0<>B{P#Dg~Y*8#=EqER4P>^ZZB)C(Byw-wE45-2fQz|>c;ff_tU&`77wV=?j$hTN{_Fkk{JS&XDZ#^|g`;Yhh!a+n0Y) z*JS8pd{UaG(_W}k9!g7{>AYhcCkBU++AIeK?l2@!cq~wfTw#_^MfgH<@=T5clc$^4 z&!9a9Lps;S6_TfgI*sy~AR0t~Y_0j20cQCKvLp$g##68T*cH|@df*rFo3mk2*e-Iv zs-a?-TaXcojjcfe*2FP=d1<)w>2as*VwO#UEgBE?fup81r9v$zsk~e&!QwWo22T{+ zwY7VR^+0?`oeetNpCxBUQ`w9?3tisW46Tga0UsknjJ=uWS+MbPlqO6%M}@$oe`H88 z=_^3WKIc5nr&8Pd%~pHw2UYszEmXQOf+n?9$FOG8br4Hh?$?aHgSUn+mth{#O>`m9 z*wKaTch7|rn@|8gR|>ZkzYK@9&K>Y)<0R*qr`2|b&v7mndJTYm<*T*e9}p=D@BdaI z;611p?+b|cY^3UAPs+$+M?Uo8+jX1I*zA4{(ht~1S8cLZFh=X?*>H?+l*i#%&1!ZPf>flNk81 zUmr^RO4&w`-4khjFQXvabFjES43#t0U7P41KQ=r-;Aj^eS-|vi8QIy*|UYVsiY`jhD8H=ODP@Q*#vEetp4qt7S=N9k0capoUc&9dglQ`^r zfnGbc3EkwlQK$eq-wr5HinHjH8 zf6y`MJ_#(6rNaAIY9vnB7os+SF4Ymd80PUQlq{{*>Wk@Hsyx(h{jx}4MnKb^6cWE_WUp^HiK-U69|uYJfn z|3cPnaFRQl53R^~t-NWfW>ZT^EyQ2~9kkg1>l&n}L^!89z9?pD^irZR#4PoS@?T@~ zPUl=w9=nWn{a)tU4EobyEV7e7L{-rDaT|A+eVC2iK_L=cxCu%1L6?|pJV14&tsGX8 zvRNe&qC}sn@u&te=G}o}MG&4KRe2$o#F$)Z63~OThkqW<5h@bK$v={B@Mz?Xi9kfw z=kQ;ZUa&_<4qEc#gNRDehe-kUAI=e!(*#^5EIdU-pKU1{=r z-Vio-@8i5_XyzA6d(bn7fYbTY%)#JmCmH+R@ZEqkZ8LqKCY1S+`f^d{&Yh;Bra4dt z*a}JiJyJi9?SiWn!}B6lz0te5Ef?2$=FYwIrkP6^cUViR9O4N+YI|m`pNO5{?Ug^iwcfiN0x`84yr6Za(U0k^>;;2W=~Z^ZAP;= zag)Z1q(?=VMZg)P)23tP!z}HNX-JzXievLbkah@3TbXydcpy?Qa--;MsluRAe^jJD zRkfLjb+Z9#&&drXU25<Pih6Q_*2Azz7Ye5IqN~-X&ZaCRvNG{Ge zN=S^0a0yGHaBpbQvM!i6rv<1c4b}YITry#hEP>d`_4g>0xZ+|xX?6(G>|Ho!05Qv9 zm^ZSRF3Q8?BW^e7zptQ=0!x30M#Lm3L<<}5&XVLR1vZC#VdjJk&tShax|=aq$=qan zYhKpTZdu2tHbg(LAcM}!I!k7{CYI-AUBn><1?jMX$3yc+7I*fyW^T=yT8uS+yAfGI z6itHkqtWR`+TO6*O!^8~&+zERJ222wOQl0%s><&ku`f;GrNAkxxR|rFS?H}B43Ng5 z0tUp@h-k^rl!OH>pn|ts z5LZp3n zSYL%DM3-3l3C11wgT}bfZTmGgKcbV0F30@MX$*&>nKjR!t|*8v_D4OH6Pn8gslCzV zBsPE`B6mssE+?mYhSBXfvma^zrwv(aoHi7(y<+@)-pVFYiNV6Yg|Z3f4ZT53@?yCH zu(kLb4Jie(zLxVhUb2tN&YoTsNQ;|dkusTW5Xl}T=~NLMI*G{14Cm}oFu?ImQomGM z=NAkk?%~*mrOI!cw;>8&*f_hD{1W<;4k_EEYi0=Q4UU`#;swQ8C%0TV#UICi*zyim z7I!(ndl5F<33?Fs87~6xmyV;I5nKiq#$<%!ZRF&4XX;Q zp5uN7f(Moa5ubTS@@H4zlP`rW7)s|YAx>Q+a$zm`5|WLa?p>*@I;5?TGo`DW%Cbt! zk}$wIQpK3Jpj_zY5C-LzGt<5Bn$i`seI4^kafd2hTJ)IS_x_{u*@e>bHC^P6+50yW ze(6H@A)|VnM2G|u7UijO3!g=1J?^rVU^oqvHmdygo0-hbEI^eXu~}Upwo%YWF#fl_ zxE4_;+aD`RtlcC$r>HQsya%F|g++{t;+R)7C^OS4x_d{pn^u zMKP7RMtWyym|@D5jt~Mp|3Z(52o|~ELIiq9O_nVS>Tpl{VFMvl-UcES67DlF;U!(3 z!brlFC&`1*MUu>{A~Ik3FT^VEgODWZ(G6(~Lar-NOHjp|N+rRXb%aIo5+m}8P*~;T zl}N1=j#XWRTtr4atsC?^7JLluyVk4_$=xlXrxu8%g%^%$@SYPMDYJMAq+NYNV4i#T-;Yv#t3BBrT}} zE)$zf)yRS@D+!5c^-z0}yIB^T2UQ58h5{b+cN&4kxSbhO137!K{ z2CMY>8%T(}!D%>yLxrgK zz!i0uQNtj0Q(uH*9BzBakKWRtvkN5-l6ZBq zHIg++9B0Zx(Q8_t!Qr9!yzxFElEilph4$@NMXNz!$*Np4HnHV;b{C(m=adnXtOS4SyaVe&HrNJ ze-QlF9Kft-UyP^&XP`jZ7i-UhkU8(9BmLRm5HmUhr3JG~F<$;<*9DK(>%$Tzm-G|iwIZ{BRTMo+^I+(#Tox3nXHYtvwON1DS9{hqJAVR zL#BUs4d@09!XGt6*oF;UgfYeBudFu-ZBjqIZ1%!P#41Aw% zIc5pA&)SD`CeWOOtBhc%8I)hJyV&C^tLy8X<=6{Yh|GG#hYRB*H1s)hN05L9Nf!3b zCV3~1lyTBh%HKdd7R>Rj3uz zgld*-i&(1LrodJvXBR2o@`bHL-UxB?mk=aN#wRSoYK>_&DK{j~pwxohkL7G_pL8Yv zUonK!*n-eXx8@+Sza1WC?Isu?OBIHu*o8}M5u!leg!%Nv}A zXc)Y53vmpcDtCu!K-TZob2?oh#FhDh^+5|Hej{xJ8nNK8oXe(*rP2(+DUxB>4ybD) z2-A*~up~TE@<`GMvQ>ErDL=rWXi}{TX68%G6tHF-PPvbH-GWi&gz+R6ndZ}RxW7jX z=B*&bkc@bO+Y+&tIS+ zUgxRcnWz(Y0r8Y|A$KYcl<=IVvjQtyfG$QY$4T;z?QOV^INzhxq=S75;Kif0i3*ha ztsa?tE=%ISlgV%*lK{%ypgGOr-CBCLm)@PFcX#P6NN-Vk_mSQa(mP6e50>7;r1uEv zJxY4VOYcPKoh-f6q<5zDo-DnmNbel!JxhAelimxYH&!nItHpRzR3ZzV?QTHfy(p0& zeFMh;yAv^(OWn9gOmL!Z{6c$RY8bwT-hzS)Ybz?O#F-;++qr`->J=}>Gh>6sjiFb(UHDV%~{RU|>CwkK`^(Cf8 z#3T?ChGD219f>J{m`Lk3F^`z)64OdzvJn&ME8fr&(^+C-iRlqBk$z925o+NEk(cNiV|IMsqwC$&&AXU00S0~-dmK^uXhQc?rQyT+%cX9vb- zr6;9~36$b|0S819l$@Lz7n|woFL|aY1PbilBd~E+Qc7lLXJ*qTQl?<*3~WZQXwj3H zGm>6+ISC!2(o^F=1cJk))bw$#^cFocGGjBdGMs@udIS#WM}>>7xR69w+_-4Tno2?( z$Qk*eB3-Wd5Dyt$@e&~^*jExdBr!H+jEe+x5xk_R(=(j}Kk3tzLZ}PgrVetAk4>YJ zV>2?HX|d_xVh^wpTn5fr29kVGX0C8uU&Bm-@y94!gb+BrHaK|-2vok}A) zl!QSxRU|2Um9y`WDUvoAkurwh-l8XAb+%K=piHZlAczNR8397TmX)|mQUXdw^g%#Z zx+fr{s0vB3(vOr6Dkv=t!3U@Ica0CuN=QH;i5%l0Zc+~VhxT{&A0UQ0gQB8BBSqPj zBv?r~l2Obft8KPEJcr&y@L<)}p6G z_H2kpwlgg?1HUO*Y^&DFe@{#WARNa8P?Z9y@%(9bq!! zVv}9z&a9T%&e*uPtnoyms;nngSR=0SNtuIOlJ|HLI?I!KQVIz&vGR+^il^+xyCPz< zLAYe{MjpXBnSGLllaw%-K#~l|;i40h5;Cclty;Ehm6e&4oY87@Ql^uz8!<@gmT)mO zHa^ldDL6aRl|hY8uMlOTMMk4+NHXTpEEI*}fnu6EdaNrh(}P=O8via8NIW9FTCDWBo6x9G(4aSZJ^T{`bvX$YgiAzdqk!pH6h!Qx?l`ZQnlsl+I zAd*p`FeR;+l#vF8#g0yPwWQ)=Q-~dWX1D^=lH#Py$Z=A^P`^YQ2SQ23Q={=k3Nq9& z^l-8(WlUyb&EOd_fjubIbOT|4$3Hq%Mw&rI0+m>TzpQwPx~8Q1q=Fuv{6HfUlE_88 zaTCd3GUNg&Rnn5?N=Sm6Q~It76O`1sf{E=ieIqf8}XtL4AaP7WvOJSkjN#pl6O(t=QP&h*qt61sm=c@+u< zl~jcvsGSO(=p-c=x>wf6nXyC#)x`?C| zXNRXugcfjB=2LEf{c~PHr8Wpxnfn$!Gqcm=Ix=KH#DGE0@JKOqSa@XbDsqstMOQ*> zR&r*TOHzm#)FjvFG-%ia&v#`eqKK*)6do2U7}S|NC#M0zSHBB~F;Rl)(*9xBC=*lLEU)|9A> z#}iHtlu=RcNPJSmuVZ^>W|PK50s~uk6kSG(p5(g;if{j*Va|{~F_Hb8Q9;8a1_X&D zoUCZ!D>WejH54gwl~yF6j8hA#?JAiOW~gg)l!U(rkBUgDp;=L0Q!-O!|FX;tj~RmS zs7+h+%!0Z}N5hJwC|OMOSjaLOl1k(yGb}xId~okUK~zPn3jCA^`Jy;cq-a(sFk&Vu z%=1f%Ks8y)_A~>fc*4;3j7S~RHaZz9a3X1dMhxifj2JMWUrdxUTpZ>E)d-!ystDpY zy3#Y&H>736j!#Q=1&>LOjX=98DmE!SIy$s11#L|n(6)4<`fLlFQCZ0?l8P{c#*D5R z25D5dA-)>XRoEj;4f{~kw`dS~8pRY9mzt80G^XW*EOb^fv!%u~X~4W-4PrnWv`j$z zOA0UP#!6ADlA|i_gF{u;a_6flq(rI&JhdumxRbOzpWOpVsd0vdM+^=fyo51cKB_rwRkf4x0q0Zp&!DR4TDnG#< z%m%pqo=DN(U#_K^Yw>Wq(_3=_^{L9Y*T zL*hf1Cw6j$szP6KJjMXz{Pame{|IGuJOp8~E7{ZBLM$?Ing&Xmfue$wGBZdq4@*u> zO{Y?bKuL9HNNjT4;M8%zAU$<-ER`}^QY@*Nv1sFgCuqwg#iQ(nq-JD7mB^u>H&D!^ zP-w8F5qXuHc4?%8D|P$Y$d*|dE@vi*9WA{yk^pohtTM(Wr8%W<$#ZK8oJ~!Wy2^t@ z=YXie&fuWv@DQqw6mxv4GXovNxJ1&yuH5k!6JwJr%R<}sO(@ty1cu2q zC6$q#k{LUhASJ0HS(gHhHXhwo(WoS-wW;n0vMp8LL6Jj(qMgy>+2o55Jl+b~cmDqHb)Wyi4&^=8?U`cz9u9Br{ zGE&L!f0Ct289@D?4*8SV6bI*OOmgegqo%sP`uhr}baC{=Ad{-ZDgl8Mo;H2GIrm`VZBS>{TE9>&gqE+d&e|V&`PfS=?|DZ@oGo$@iQI=#s9x1Bn zhqU)3I-o&=0uq{@4z)-c*HAe`mK!IfWHxaTTZldw~=8!0AA|voayt>kX zu-q>t+(bjOQZPsj(j8r+1o`QlC50pSREC9`fR?Tv0wWGD1d`LM82_n;RU*cbFsw+1 zLeYB*Y%H5_^LX3N9vm^|gjyT@W@*$(#=H7B6!P&;=zu6u|F|klbau+${eri0xv26djT};SQpW{OnG)FeA0i*n z4-G8hKRPx64IQarCD%+S7#K+zjkcszs}hD)`0FqGBQg(hmo#*`JU%UztVu*=O9QO( za0WFlEIBI!B0UMMm(fybb5^$hJoQF35@$#Z!I%WPVT3E7N@klDJyAJkp)f$YGTT;s zfsUTO9`F!dX_<+T1bO5v18&vWO%wyE4uT>g1`I{r6+(u}BSIs44@QqV1gQ*irIEI4 z{1B210!zvL$53*a^E7!YXEds1M6N@tFDQIG4y2$Xr_}FA3 zXQ)yzct5WMn8qZhFYWL~^m5 z=$s&bzS?@E)c8$GaS|FOrBt~{WB5{d5~=KsG>74hoI_6*hgAL&GiKT(Am$1nc9@lu z06#Sz;ztD_OLuYrvjFn|3jiblS*k^jNg%s*asaac^8gC~l!Ao(_YceQN|l$lw~tz* z)#(ieqseTxSgclGUz^?T@beF-RXeaw-Fo#KG-%kUag(OanzukptaY2V?b>(f*r{`u zuHCx#=-EpM3JwuN!+Q4#@7pgTqJQLosDXo`2geKBb}p0$GZ{|$0nzwrDslj zeaf_)nX~51o4;V;TZ@-2`+%i5Ts)^l{=6t}$_IJWP+Cey=_vzcq)e2VvQSpam$Ko0 zN(VMM`cnZ^EvhyZNY$b0QuV0%R0FCZ)re|LHKCeP&8X&73#uh9>S#^1q1saIsPP&T^x>DV#o|HfZQz8{c^`ZJw5mY1)GO2o>NRQ(o?GKbM+A<$>}Gskf;m)O*x&>O<-y>Qm|q>TBv-Y8|zK+DvVw zwo|*Q{nTNqh&n-?rp{59s6VKi)E(*p^@J*?7+OVZXd~@Q`_q_?{m;)@ESvB=7w$f* zFg|&XWow@2ex>cra?Ib#PnEOV{jk#Z&htuRIoa&xdB};0@>5pLw!#j-Rl&-tlBga- z`SXf^Phs#xR~c)ynEsvdbd|%UXLo_U6!_-TyHB5cQm=~bLKP0TpI4cya`B|fZ&kF& zMdin%f8(Ljx{{=oK_o*}VpVa~@Bun_9;}n8cq(J9u=o$ZKbBPnyjga?B4k{&J2DtEG9$@4s^5PI@m%|~Sn zm29mD@#1f_K-HYCPi{RtW5VS3(%$=CnD+I=mSN5{p$ns82K8A!rgK;CRljdFXx>YA z7(Qvf)8hSYwk>L>qi1s=W>IhNhO162s_Xc=Whc|Tm35Bv?qyb`ryo^&T^`ujXVeda z1N8OhY#g39+BNpG#eKHK&-@@YuwPVg!WVIUdp5qA)1-sfcXtaMs&RdrIo=Ncyp8V% zK@F2uwrgKIBPVfy+V8Y`s6jbY?A<)Qo$g29R!y`iKWwxZb_BPuC+yzpYqSm<_RhOa zTejGBxLNGRteA%NzVFef!@i*oOS9rto$IzsOiu_H*}sv0%&M-Ry)s&;Yt203TesQg z;o~|6I@-|#o7EQWW39rf`j^t{nk)&ke$q!w>1m8~#&l`hy4`kHy%i@@hqp}azPR=` zXRca|sc94X$9(T@I61v>Q+n5fB5(WnVa);-e14)qvt>Pc)mk3XLZpl0qg2h7(d`_) z-;9jZyL0O9Ue%;AmvC$&OP_1k*6?Lfp|5?={Mz+b`F-B7`5z%eyM8q&!_n>gUfo_< z-|h2};maB~wq!0Ws@rHyE1iC0-3x76Y;0+$vymUI3*6YHrPY>0cQiBz3JlNi&+*MU z+?esoXjf?DFAQzqmC>!gU}=@usrm0-9XrgtEW8qSxN#F-N0*LW(l&8T8h(DFR$a&J z_cFZ$=QJ{PIOj+Y40qS|3c9J#(G$b_1*+Q>x>q)9H>`HOkc5~{KgM*n_@;I{+@e8Y zr-oru!V~Daqo-6=DttIj-VZWl*(<4@bx&RaIyUhnsIW18pY zzEPY1a7bfe?&6CrHs)9zhTPI+TDqu(-tww&UPt z6O)q@`1UHJkFwXIRV@3ko}c&It5>NVIX_3$i(4Nxtz(OrX|0B?ZP&yc=<1h~Kk@C% zoS4o{bZc+LH1O)#yOv?nM7O~>-_@}D{7zxb9B;l|-&AXrJJ!!UzeSIpXXt@H34u+_ zSxetETRurMseA0qY0XOehAUf8v|CZmu>5oGS=m$N6V>BKl`j8i$oa3H=kv>e!|dDT=We=}!8UTvfk%7ROMdCiPu%y2 z&zzi1?>=(hx+od@r<`)%x+WQESDE{+?BVPDyU%XP@ixfZb?+)P4ZP4e*Y<(z;g^+9 z-M6JsISFH~yN|7sV|eeGyHxhDZtgwz%}bJP)Qn^99T#N}wCswHhgHT(yPTXo_5QrD zeapuy-&)=?x5b`w->g0R!LxI;*y`=0OTIYwvHL;}z2vU@99G^ThD`-GpPxVL-V5Wv zxD9`;{rSlO*wZtLpZ~V|uU#<4W&iqg{~q@Nc<_DolfS;+^5|FMVc$ddO*zT&-`#az z#~qIF(0u0p=Z6a=BR%U**_k5uXRv*3-lekNf0k^m@v9&F_>q(v{lgP?aS5Dra;7Z2 z>%MYRGS=(Ap=|px_hEd{AAr8srC`|wCGJaCBx8%XpUQTgc3&hO=rZ>S8Ha;3>M$vS zoIHA+`=V@q?)A9rm!s}NIIPiJytjSxlRfYiZdi5hqwjBh;l7zeJ0CqizEKK!=au_U zkIBqh-hb!gpLR;NwCzsW?`I@*_P0CZ-u0uDMrg~Q@9h8GeH9<{Hmu>4EORb=_M`%x zf+>~g(E3W_&-JglZ^@pQRPl|z>@>2{gKY61 z-UnT36voE|ObpIQ1{>DTU4Ids~!r+c?OT7k$vAAj}P zv6JrAh^|rpkBh%q|KK~=((TVa+_U$|Ss17E-F9!|_NV7ywDq2OX4%*Gejpxxxb);q zsl=8g?_Pd(>ad##vw!l}e{I}Ret~!xc9-GqF-k5LH#Oi3+v@_SKi^Z>F*9Oh{u)V|0{vEo7 z^{wB0SZKfY-I<}oO#wq*snD(j6lz2e3XdX37Q5;Q;`I69?u#?*mMA$?kGYSe`3qtZx!n9zgdk^B6g!J=IU*E)T^EJFoOJhrPs3e$+LNzd3EngubXf8I`CIG zc1#F`DB}O-$?2uJc%T;?g~`jzf-1~8vEYM@$6}%h2C;WcmePK!F za-kRZfv|VphX}t?_;%b!h~s0yTJKZD^OA7Xn-NE5!G;V3@E9aegB_{N!82 zyIKg@x(0Et720fDhxoq(F5e@K^}@_q8<5TqLSVm*NNbaDjoOU#HVa-~{D?HS2p{zP z3F&SXmhIb$w0{;Zg>FOog+h;wg}`CEFeYFJ@Yo@!vUdWPUBZtCb^)K=f{$qraM~kG z8MGI8?G^CQ6bh|r{nNoe~}`K83uU7S4=2jr^S!ihKT!JpL{OY0n^^X9VT%XOP#k!tjsJBERRr zw{ytzIlx{Nw`ie^Gey>P67tqHx%733Rw5T-`y>bk&u zbRG1%F3j#;44M@S%x}e@+YMpf_#2?z4WS-$6ZE?&TzK~;Xn0fD*SG|9ED>&ODgiBT z36Z^Tfu6S@Z?{0xKLxe(Ptf&GA-nib(Dt@4DD5`rds|rf@HS|CM;Q0U9nkrXu(kXS zXk99NkW&hJmkMV3E@*yNXp(ambiXTHeSR0T|4WE?{V&k}FCp>4U*N$#K}fv^KHL*d zU%v-l+!wkz?}H!rg|R2@gC`G!)V>eEmj^=spC5oX4+M3ahv3gcVeQ8c!J~&lFViFN z>5=gB%tzqWBcbixN8s0E;iK0cgJ+Kg?ZL<3+Y@1W$0y+36XD6qC*U8xy`O@IPX%kn zQ}FSru;cfq;ANRGH>eE!EEC3lQ3jrt3FFnzz}IKOyJ^qB+h@Y{W6!|f=R$nP=iu>k zLI2)!@cFq=`uI6`T`us$%fat*VaTR(@Vs2OVs(S>ZedNP8@zW5KNq>d|H?-ypZE&0 zZtoK0-FR|PkB%P%p?n1Cx?c^-zsLrAcd`X@=H|gc$wF|CjxoU}lg0+4{0H}bGCx>Z z>)qg!<30+`zxYjX+t)Y2@2=oUmZR{0Hh4svVuZOLyf2mtslA*J`Qnl~q@=wmBxkWb zgrWjNd?qyv>HVa6$f!B(LX@?-hTPpIgq$4LJ0z=4WJvzS!6E0rd^M!)>!U-W2PcJi zcS;LsSa(v$B+Imr#CbDA6y9?}CN9hiS#2u_dGE7DA%Ptihjcu!G-O}w@{m2xK16yS zhwSS9Inw+pWK-U^NOxUG+bipl_NI{ieSSjvg&~d~cLImKA^SQW1Rh61rvCgZaQQ9d zdera0=X}VfKQ95NKSI7*d;@s>8Ilot7q~qLIpKZ`{GK5#OcxGTh#mW|qP+(%THC3_ zCQZG?0d>{lY(K5I*P<6q2BYZGn8lyGt)j`xCMK#J;%1ejTHy#`Iiq!!J^z>Y1&ExlTc9s9Nw-->B3?u+dxo=NE}?wQh6oR{BSti8Oa zn72w0cl{JB{&GYVzqk}8_IuDr+~n0yyi=>cSkiug_-(&|V%xZAG5d`eF=z2mF>Lj4 zasR$oMdj6zB1Mf7*ZGeY9bMza&chN!pGk@0qIbuN`+i6k*Pcufdp}7N7x-m}Q+sBK zj?t6EQFF4zs8w%>*N;vW>pz+u-p6&fgS|d))$m{}kJgx-EX2e@7g)u~ck( z<*wLMcTddjc3=Es%meWIp%}6Kkr;OSv6$xfRNUXEOdL4znW+5qx%g*MxmeW_{GXYK z_8|Q&GD}A0*8~8B3bR8LW{0310J8w|0A#+c5U>ld4{!)T9u^<~L_kG672&BD`ewB; zcUAq*t*rT1v-h%Ke$C#?8~pc9XwT914U7KLcag-l=kZ3 zee#pE9ydw*4o_*Xoevt1Sh(YlUZcW0HS*PPmGfw>$gWKtdX<7=ybONLx(!Ge(z9it z*_&sTK9)MIdJRo_C9Hh|f1_5dGX*s4(EHVtxIw|K>(#PZ?X~N-35kx+NPaCsXxqGT z-6k#C1@(81pEzO6h$yjp=Z;-^gbo~;m_8{pb!_ag!F~Jmiy1z8Tw0cgI6TGYa6>qB z+qpt^8JoinVcW9}BxYS?_AwioRm?&rhe=_^FhiIyrajY)aWF;(-CCwpaaD0vaa6He zQKzQ?MK^a3uZ3$ zw3_y&aq))qS4KU?%;sNIDfK62Ig6>Q)Me@dW<7tWPEo&6$Ec&22|bAU&^;(Qg}6!W zCtP^85i_OVQ){U;)GGXaNqt6rLan4$Q2(NqVOI5BYBA4U4UjhC19#l8X26w`|aC^)Ux4~?2OUxTL!whm`%q7>yta2SH5VOnym~XaY=Glrl zXcK0mag07@r`4FJ_5#~^ls*OoAY&9XTsXR_+*gnR~|h@OAjsd=MYSC-7PPLjFU3J-?H` z! zdsRnOzo{;%uB%E_4^=uZi&rhL`d+QPI(YT;61|3bz2-H>YrNNFuW4R$y$ZZO_4?ZD zd#}x2ySxr~9rHTv^{3Z8uV-EgZ;iLf+uysccQ@}K@4ntq-miMcdXM!^^Pc5B-}@c! z_q{*${@VL{@6Fz~y#Dek^P;`g-bQaf?>gQc5JE(V7=(yNh+OYH@3+0*^Zvy9EAQ{T zH+diO{?+@8_a*OJ-hX+QdDA{NpISbRd|LQ)_UY-<+o!)ztj`#qG@pq+GkoUyEb@8R zXN}JWpPzkp`TXK@!sootRiDQ`{^53n4CSL@Ukb#rxFbvJd8Izl~2{i-@vouz(5Jxe`by+plS{i*tE^-lGE z^{?tv>MQCS>c7;F)oP7VkX|8Fj>81(NY*uem?^7R9pH^Q`7prfp6&jVspz+nz z)il<$(R9*8X@+Q=8kZ(bGf^{LGh6e%W`*WU&1%hN%{I+G%@NHXni9=@%~K7h_0gKO z4sAK^LcI!>?GTlKZ|4fI{~ zz4U$bk^13!r#?}iqQ9oQrF)<&)A4$>-lF%@x6*ge_tcB}0s0vIYx;QoRDG^~f&Oj% z2l`L+-{`;7@6jL9pU|JtU(?^xKhT%yjRu>cj-ipEt)a6a$k5yHsv*`e){tg+!!W}z z->}H=m0^uxli_E>e#0+@Q-FUKbGj>_%wIYmy+QBL2kM*Y+vvOM1^rcVOgGFnylGf$SYi0g zu-dTRu+MPBaMEzjP;9tucw~5PFdH4ldd4Qk_QtNp5M#J;q%qEzY)m&!HRc)@7~eLo zGOjcJXe=}yG!_|uH(oT}H$F8oCNGoO zbkFq6q%d2}{^kbeX6BCO?&eT)KXbf!tU1G+ZJuSGZ+^%8zWH18_vW9>JIsg8$INHV zm(9-%3ZswFVDvZEH8wN0F@_rZ83!9*F}jT7jG4yQjqe!WH-2pV()hh`vvG%UpYg2m zva!T?*Z9n+F!`7arpBh0rcS0Fraq=f(@@h$(*)BbQ;unl=`GVz(@N9lrfsI(rX!}~ zrVFM&Ot($}w7%H#WC4cQW@dZ!m2!?J^xOoiLp-T{Yb_m77?z#%wazGS@e^ zFt;;Dmu3Jhi4=qhBtt_1_ zJuTsu0hVEw*DUD>F#{pqMu?9PqR_I(@{8q!<)Y=9<&Ncn#mlO*+N`y#O{}e~ovl5s zG1gbD@z$}{EbANAS=Ra153QeCzqNjE{n@(9df0l*ddvEkwaiNUs(p>Ve!g{lJNS0< z6@B~q#`wPK8}B>T_p-Ivde{2Ms_<3$8hm|yoB6i!?dmJ|_VXR+`-<-<-)!IMzVm$F z^nKrVh3}WXt9^I)?(;43J?VSdx7hct?;~HW&1?&>)w8vX zYTjc$WIky=XTD~>g+;}@MQ5>C0xb=p89P`aErTs1Epe6W(*xcII+RYkdjj#@aW{kDIZq2dgSr=NDSyx)WvaYf2 zwC=b5YCUDWV!Z*)_}H3eooJnIoo!uYeb>6e`k8gJb(?jc^@#Pf^#U~GZL88(<7@Tx z_ig0c!ndPuci$-AA-+yumv5TyL}FykVPRn{QiWTWf8eh`oWmwY{Ug zmp#-z-0rj|+EeV=_UZO{_BZWc*uS;^VE@U!*M8XkoBgc4)c(-!wsQ`>!|JH*XyEw3 z{)zn?`*-%O_MP@a_FwJS?6>R>>}7V|p>|jtevbBzu8t5#xMQ&66-S&S$uZTD>sa7; z+wp?;QIbzc@}g&O2^6?l>Mh${j{On_nHjMt*JmI{O9r_4XU(m*AJ`m*tn^ zH^*)viG(}*@xI;?PKg| z_KEg|_9gZY?VsA$*f-dJw(qi^vY)qKxBqE>Y%jMf9U4b{M^i^TM;C|a=PSD_}H<~R!1PC70+t~s7!DZ7`S&d=c&=-0%rm0usfNWYir(zt8>F z`EB$o^xNZi&hLufEx*6~p8GNWYJa1DL;vRf9sIlbhxteN$N0bMpXvX)f3AO?|6>1T z{-5}N<-gT`r~e`UU;WSdU-7@?|CfIQ|7QN}{k!^y`uFo6?Ei{?3PMaph&K`91BCd= ze~14;|04gh{+Inr{O|g60X_ld07pQBfMx;h1G)wb3>X?PDj*?XLcpYeoPaq2%K}yg zd=;=J;KzW%fc*i#1QZ9{4tNysJU~@TTg$grK&>{lI@JDlXEvNGrkir_G7We$m%&(-r}(q{dG0Iv zBIB>T$+c6?^ZJS@;b$q6*m3kl_6GZ%@@>^XuR8o@W`#0{Kc=|BI{979PUb525g({r zp_tFTq0q7o_>URfG>Wl?rTk3pPsL8!r3m6a=OdNt`9l60|E7xf`dqP_euw>po2_i5 ze6D=JJC(uwUX0#-toVVSs64^l;lE-n=-Fpr%&!$+OQFIzLk{m!ZDf0~A1E#}7unJ5 z24*=sirdb&WY4k(6$(HY_b&G_vw_!hd+`^j2xlhqUvn*0&2)b;7kGbF6K1qxD6^F@ z@Fta=|B~;_7*z+@Af}L+$F*agv(fxHZXo|a@gcicv5UFNrZOLK^_5q-c)lxtUNKVf zOmSYZjz7kK$@(e7xftazuhGm5j4ux1ZK|c*C}l8Lpt{P>W}=yWbe8IdYASaS`IxK9 z_fjwxb`#T)?a6(?{)=nG`f^t=j?kkk6LzO^zxpsov6Hw~{AgwiaNMZ)QTa2!L)nr$p!kiS$8Th|vzyuXn1<{} zoSMJRY+^oT&MC0ohbd+)d|&XdKR1V4z;vhEv03~sHde)`cJR@v5z2D@hJsa0;ifUY z_}*UUlwDLiITyz&PAdeq5$EDZYvTDbwhW_6)0j2PE2`u4m;5o6MRkS$3nNb>6*PN{ z9mBlMUguA6XSpc$CVNHEmD$KnXJ>JdjGg=3`yo?@Z>i`4xthr7HD-PXtK|=|Da^O@ zMka{0DN&{9%=~^Pkgu=IV74=-c$)c%Gb-z-ntHhuMy?(+of*N+Q227+@bB`U@(#|6 z-ALbKAF|E(oy=G47JfUwn%%G5t~jCK*ct45>;N`ES(`6m8$wQBW$H42u!orM*y-F1 zzLcBKPXo`dv6C2owl^?3v%{~gzh4dNOp@3Ko3D(0?Yv2q!|j6cYRv;EZrK~ocV z6nDG^@Pk+jdxSm8?o_I@xfmZX2~e$7?&sEVPZXaiyL$bg7{%lA8k%W4|fM^F1>Q zvm0&LQlI_D;ZyO*Np4Q?^U&CuObZ_yM{Tz;PyN9%abQbz{^ls~C+kG=$}qymB?WRHfwiDO%E}5Pqg&sbVRU$SlQ7 zB6&)Cy+Iag1@{-Ec{znckgPFXx@GIh(-)?k>5;zcl_}ovN1gg}>yh$nXU=(M@?QLw z4&CzvmVa7@QdH}Z8demsBMB32RCpr)=3JA1SF*Bu;WPPL@D|p6WNmuv$gjN(7JGmO zFE6|}ynYx#dYGNB+H->RD%3;#p^R+Oz)dSjF!) z-;tR`p}v1^ljADx6(c==c;YGDCV!uhzYCp$?C&4mFU)_x=wsA>^Py^We+B=q;9q)P z?qB`i-M>m!8jzj4WZ$k%+Otb`?2`SuWVdbr);a`A`*g`JU9v})?9go~?an28bIH!! ziha4gs32))ZYbtz$==+4n7bVy?aqy+Vx;}K!>N&&>~A{efhSW_sOi*9 z%n;ART=ARKTbMas`ogZR}+{@H8sswY^_oY3#3R;OdZ6oHl zYti*FC7C<_-53x!o z_f^IY_y6j7x&P_q{->AwpZ=fS|AY;Q|M_`&{=v)h58N-$KadN_%kvLjo`3N2{DYV0 zAN-#_|6pHGMU%dIJD;3|N9Gi{)^{-wke@1l$1wg1FNRx{I2krFL=He;+NR1@!0=@U*dKLFdZ-#K>REP5Px3) zh~JHXZGgQ166Pd;gu4zPVIKiV_*?*qgIsPz;&}%^;#v+M@qGdyajpW8c)tgbxVHdE z{5t_8je`J^&M^Q<>kNRTcLhMwECG;o?*T~KWdM@?3;@AlHh|!f2OzkRduItgZvhBS zO8^9~_W=aA4*&$ej{pS6&j19^uK)zsZvh0~bpV3%1^~f(Gl1Z}6+rOc4j_5h4Iug0 z4hmxn6ST-lMYVGjeCo&C4%X_|`j1mcGCIgB2fr^4S+(t@?J& zy6-n^+`MJ$w(UE2@7;g!@GnKjPMkb_=G=u#SN^zuqvX#!ckexT^rY6mSZ#67VJ98^EW4wSYpv zCcr*`KjI4nK?w20FL6j2=;p!ibcFDZ!pwV zguMtj3$Wo^xWrI;{2s?Qdy}EkU{>N+4Y&&0-Ud7dC>FyGUUf)m`hVDXCs|iNN*0p&qdle95M}e#S#1JcGbfRV<8ub z;7x)|Q$4<0<6FRY>z&B^9?)n$O^wP&99Np2_70WG<1|-=&K>oK_iWU zKYXsuaVXN5G{r!SdkRh`xeG6DoHH(QoO4VTZUdtRPFPGY65_LywLd zMtnki60!VAw#4-lacS8E4Psd+TUMb)?$Ra>yJUx~sz~<{n>hKB3V1j~J`>2L3ivom zK9W<%5c6@5xlL>Gb&7o9`UP^g7(UNRpArh>^P=Z-eCk9go~xek3|A&`E+(I8xCRjB zTasD6(gXL3;0|Wo5|WvonoS%_|K^y4yI1PRM1~J*+q$(xlly=3l94n9SG|znkN@U2 zDfWfn&uVy)Ze$}Na~Oi52dlBENhvkboK@X*JT5((Tpj6oe|IHVlV}(G-3bJgIJW5T zPFX1xj*E%ogbduRg;>Z#JF)agiJ^Gv6>`rAbyyLaL9WBdbOnQYo(o}a*7Mx2L6z1M zUDEwpRd-(eTK|PhFdjA4{}kv`B3UPA5QI2MpJWrLa0(7T)syA zf9$;pm|R8K_FvOIfg}VnY!dbc!VXDKGBcToOJ{}nCPSM^!s0SLndu}$CNu3Ukf35C z5qSl%K@?=Ofhdb8EsG#)vxvxMiwMYz*dVWly=4)U?SJ1@&vUxEGjZ^nn7`k3eFJ^+ zJ9X}=da6#HI_K1><=k;tzuCMoZoc`)I4t$Wg>%fh9cOeNhefen%v^`nE*boTofovP zOq%tPMds&w*`-hHf^PjLy?3w{ig|dyx#o!j7B5+Vg+-3EYh(7C`wv_qiMZ*IBZMA0 zWTkodP!md;Q$zhJbK!O-++i*WVg0A1DU7oVl1k{e?QKH6=9-Yr5OeunCRDu={e7X% zqS*2c{{f=HiG6rPh>#xviF_@(cw_Rh>5hiJpj1`r4P4g-_Jt#9lKNEs^{3P|`Q0)-Ima zZ`L0KpE$fFPxzgqSP1SLJv(XscQjUhns?+8SS7jN{AkSL6f?=>#>gT!H;n0}0bCHy zt?1fs&aX4Ih}*n6$}OZmuh%>^hU;rq_y|#l1xoim%aqboa{D8l9lhr9El?-f zVq-2EYeGG!dImcNX4(ty?JfGS&|`AhGP|Z*zxl^rVN*B|5%idgwp`tXC7rQ8Hfm0D z_h>9FBcfMO+6K(!TXvYMc0^h23q*Hri3Oh5*d+_EIRFOCLhnK5)aRGq3GZ z-{fBej~&?H?>=>)J>7Qc;u|Izl++)OZpE73Sp76<9ve3g*(^En)HqySZc#3i-iN1p zRnpu(+AV_i{hh<6csQEDvvDK^r-4~%ilez=>>XpcI{YKJE{Zr9>M*a3wwKqMFF{>YI3Y(L+nk!2c2YL3}x_Ldzdd=_abm7GG zbH)|2GYq_?re*<(Wc%`@d3Y-rc?*-~mV0|)E1M+q?5?e5?QUq_=ds!q$&Qt+ys>f7 zc5~J^E`n|DAJ=ZyP3SeJ!k+Z4w8y65o^iTd@cMDH%ujc=t2CKA_o07Tv&sB&AAFsF z7bN61yS?3R@8C9{x7$a!%@i%a%5C8dL@|Dr$!xhQ_AejLYT(uJt%FN(8af6J zN7d0|mlDRpP*{0RxWjS#sqiIzYAYja&Pi1*epC_{LBrONHu3quqMvqN`$&@)=RtKOUbz*=Gu*+ z8qZU|IduYS7!=GK$J>kO`SA#xe$5}o%PN(B8t>KwwjtuC*}lrWIUWJt!~oNG*kJGE zHg`9-C2UcwP_^j^KBo?=8?r>4wmU5N14V_WDe5;j)Nw6NTqeu=P}0mRxF;sD>{mzJ zE@*2Wszc3%3;&6U@bU~jW?#13SGmpO%MmMtwcBD%X!G4|XYlI2eOqn|+v4!w7zfHJ zo>R9qZ^I?~HeABE^tZLHH*IUyZYPRsw>9rWk^YAb{++<*{o9&vY=^Mkbv}#E=WE-V z@2bz2wlx_jito{9`U7qYU&U7{Q#ys)+*-?aoBNt&Y#A%6)vLE--Ds{n05RMi4zP4{aX)~8@-_>JU4=UlYIv}xv)irn$)$%M*}hz=WMSU)1Q>fZ^u@dJZOvqVL0hmOx3_@1 zd24$tm1zFB6B7Oa4`X#~bIuN3-Q9eM!rKLIY^S1{4;IY+@ebw1v#;9$fj-8d3y*V~ z`6EMc>*u=C_{0vf(Bm1fBK;Ocx%0MgId=ArHpedB5pLfTw=$?(R5^~vzHgSpP9d1#V8(mJn&$w+9*#(m32lJ**W z{UgYYi?(!$`}Id`;(iCW!d*1Dh%N3--KiDr=H-vLJ5UK#aCUv!{cAfp_jlo*d7kcF zJzZF@?*}`f>I)uf`^}H>9NcCvdmXo#>$%N8$!+dW+-CpGK&0NYi`?}y1Lk~uQ%Es>g@>~9fNozL)97YZpSmm_i*RRziq>RcXUlF zUMP_3?xyu^-qhZ=24G@J@Ylv*TR4r|^yy;|8JB9lYv=f4TfKhsV3gLuRqdv*Gb)*9 zb~d2~^FKS+H<`aMoORaMRos@Y<~Db&<;M`tD7&OA*R?jc?4mWgy&2rOi#^ki?t(>l zTd`nZcQRNt*F3q4TY1nFQC+9kGqmh$V`^p&cH@--PPsSel>ZyI#kcJC9qaNQx1|pd z@sABYU|xf{YB#KM$+xpxcbjJ(-YuwfU)T+mE?;_Y z+ZBsfV`<(7lS8@5orQsCp%WMNy7fpO+cmj*z}$xe`R|NHe7SRRIP6}C%=^3Ahd}eQ z-Q2^WxeL0&c?vAbWvdcD`r*~t;`5Xc&Ue05sE4eLR#ckn7+~%(4HgC5@Y|WS%=E>dXnKyUG`r+l5 zk&ZRyCwt6g8^ZN_aCKtj44=Brjx6cI)55w49}*Y!+IvbaGRxc*!OEMw8=0pf?p?^d zx;t()i+b(T`mO)(?BUG)=AJM&cz$~W&p`QWnV3FX4zAe4+`I?U04HS0 zb=($j*Y9m==VKkuG*8A z%h&fb_w9**Z((3Oc!5>_+#X!Fr+F9$^SATh40GL{<_YYk?{K?!?P;FIZtgBxQ?lFa zy<=;RHb0BN#(S;3_jCW&2z~!`Pje~`6z+Gv(-Ct9b~6uCSNM%p|IYFg+-BEXm%rNW zo80D3-3r_MY1|gh;WqP~tzZ}4Mob~Xb?hID;0WAc;`goU2Uc|rRAFAF^-Zi^`^|Uu znzaINaqZ1+_kz9bgKC4@yJRmW#(KY-+uS{t|JMffjd5@(Vr#9u6H#Y@Tg%ec+lhQMmEUbH^`_nRB{#;Y3MsSoV# zPIe3gPm|`FNvSmrs~gN?lM&Dz^ql?`Jcrmyfd{U~_I9_yr%-^3IDqYUw&wOiZqpap z?Zw;{>^Ap(a_L%b^Vi$$4O=5P_r8T^S4rVD?m@NBe1MKVg&Qf%{G8k3Ep~e=x4AsM z+EhQik4yD)sN+j;#<{$U+XA*Gw1`*JnG@~Jv2qpPD<(2-WEfs}FP&(Y+%-R$2+MzG zqj`+JgEe^Xofs^u`ye#ACv6OW;5PS+HO2g8qSR$)?u++fR0wZPbl2N^@KCfOzDb|9 zulYWvy3PNIzUc71ea#Qxki)!-FnT?=`R8#E?<5H1k$t&x?-TpZZy)UGSYe*t*DlKY z+`ewj-5207{et!KBDd+6xh>gkuEZFYB~5xizFDC`;3>42EO1Sa=j=Dj!THGK+-vkz zd>#5QZVBf0{oI>RZh!yH=TKv(d`NHp;X2w_eZV;eYUO!EV#Bf!(IJA)mYr zg5X-dd@@gV`m5l+u)n`oLb%0K=qGbJx1|fat8hoExY2Ox*E7%3x})WU_war-G?-rXBh^Lb(y~%VjZ7=<4bV7-a5Vu zy2;X4k;q#uod(L=K<}~J`|S2X8){&-x#G|uJ?2{YC|JL@f*!SW7w8G=^C`P6(tmi# zqF(c-LlFD}BjsOLqGPy@e>fXEHoP zdp~q<+hgzAZTdADxE9;|gj{W5%UCR$ugQiA<1$<4YV)IG1iyg`f1OSPuJza9t!CMUZeoAebn; zuuWm>-1y9>M5M4qaeS$!GzLM|XUMcMl}Z&5dJ#J?$%=EJ4AO$o5Cf<-ACAQmiBt-5Kq?hWMPo3mwyuE4 z)1wR97RF@i3R`BzXGUkn6+(qAGT}I8nXRjfM(`IeAn;O6Je3b+LP*FKxv@FAj4JJv zsVj~xjm>OT8k^lJKQ=S2v_)x)?3OwFm)SBs8i|zukRqgp_QIT+y1G~z(|4sYNmn$B zROQ3S<^rroViK89Gy`9SPDufT#V{=3dBA_U+Vm*svpXiTdqr|M z6Q!+U=`9gcIJ-+}bP4h0!bQYes!b%APu8U-Rje(9bD`p>%qRpu3IW!XYD=MP7>10` zZ(ZCnvu(T>D&ah4;5Um{5l$$-ZKk#a%aI$oaJD9z4##;Q6M_MCkyv(AG?GPhS-9lF zvEctarViqNh4H1)>Do*Dt`5+?K^~dds>x6s1Id`vS9(CnA)tDIm6*C{k04Ga8P@N}*^hmW6XR zTntBxHAq<~70aW9q%s&upAO})1tzeKMH88tVhu7UjU*OE0gAkA@VToKKmN_ZPk8}& zS-8fuy?5!S(Qaq3B!TVoeLHxf@MGY$`0bh=ee+TA1V*8gGTf47BKTL;hnGC_Qo87 zd|}$jhk-Q@HQoq-%y^Y)X91JApy|*0B~vpIzc}V4P`xtskzFxPMD%3UXFRMm|3! zoc||zjxPQ|p1%oZp0|5>om`6oVR(;+JUzz&oVHl$%da~*@jkHIZ`s~LrghcdY)yDv2>XoT4ejLMEL{FxM z`IE*^^~%&IK7pnrT!*$yf>poD(<^uKApVdQK{@{j{B~Mb47&ic%pd2K`2xcHZwa4_ zrs@sKb`<{AHf7qzL5I(XU$WX(2T;8-^>s0f?-D)vgCXM5ylsJAnSRqVjQKoTh?x&$ z{Nw600Gax@F!hC*#(Y8aWNMht8T`o9D^s7CWz3gEPgZ>qHmY8k`q-zCZ=xrwUh{|H zD^s6>=6j+iUj<$ZJNT!56J8lsrr*MR%*Qp_rJbyLwV!b*Q=h;CKt%Lp)ocDxuS|We z#h6CXlU1Jpkf~RuzAkReOwp66VctdoWa^cvkD)(UtLVwpP@lq2^~%)epy^V3Jbl{B zA7$#Ji;Ouz^kfZRZK$>s_+>8-$!9>rduS2& z&F=~)e!B7JmMk=C51PWQJ*)h*AA|Iwd6d^F79KMDfveLV^U|)&^B9A^NBol44B>ZU z=QMS!F^`B}vZi-q`s`;=cZr^?`g;Imo)_{P&@g`z*J51XICz8zehZ*^Y2DKp>F(2v^M`6bhaiTFi4y)yM# zXzD~yR(;gdD^p*9W^d7xhtp%(DKlC0T511O3hk|!6Q>MNyh4J5_C#yc^g|AF~{sd#tMsMvQt3Kn^ zEy~o#QNjIE^kmh47B-Pvup$2%8hfqX9yX5)uLBo_(Obd1L`EH#t*Nzshq~7O28~{8 z?}4kYwH$0%h4)fkYh*S$S6^!p&o*VIr2ze}#4q`YA^gU}<#Z|2Z{#G{j%HWJOP&VS zc+c_}hwb?)dik%+aLlO~J1^moRj*}?`Ke5O2^u!{GG6i)b>(;izqMtXOTzS9Jl&W! z=;@cN`aH}aGcIN7vu7C7Eqb!*)gJ1Vsn2{9@8F^*p9$7HQNK~-F`0gq={J7?>TvN( zR(%#))hkn81f7-N=RUh%rmooL~?_=Hp(UVml1CVKtvb6`1jo;RVp9iZx3a#pu zsV_mZtLVw9&wF}h>T{RiIZgCr)yF)&vJD@aPiXkyW5LyVdmrvI45tMf^3~Ar8Z>u= z%^kw4!M_t;3w~8N10IET5bD=~8BQlR_(N3?T!TA6(`j9iUNEmm|Cu5G6U<=&ca|~o zMc`^XGw{!#X{R#N7{3N{Nr+!EH52hm1IW}XQ(ws8{Y&&@YN(Imr+Q`TIUzZ3OqGhg)NqrugARp-^i%Jdt% z8Ru90k~J>1r-csq@gJ+d#h9B^4_1BAvrU=$$gP<3L-gd~^qf@W1<{jLpY_65X82iX z-WNT2IDPDPj6*^D7tbAeIDHYCeML_mPM^L5(@lt;Je)p~$GH%z-d{kYHaq}kyaQgm3B=X#5f?9cCb&A@JOXFf_LyD|)i(N%ImlcFaNr{^3gMbVRo({nzR{}nx1^_oW7 zuS|P5@5&3JC#yd1*{@7J=W2OX?E$O4=;@WI=bSEYh@Px^wV~P`&i(Rt(UVo5@xoWO z_CJI=S?vd_UTt9b%G7hdnD9<=4T4pl^}<)Co^#2J6+L-4J?Edze#q1-Q=j@RexfImEm) zFM6_up9hc`zB2WNCvXl#Po{?X6T?sS$~OGpWBxJ?A3U5s4$ZxyC#yc;g|E!;bI?2@ zdh&4kx+jf!TI~U=KIMh4%<$9DtQS3bIDHA4*F;ZNecB6Onc=7Y2k$tdC#zmFMMT&ANwQTDMU|J{d)j1!zXt_6Tv?J`aC|_b1Cd&Zdm+QnUWRbLog)+ad)EEDTc`rpzR(+ipzB2Wt z_c0fy=*g-tggtwNsn3UM%rf@gM%Cw*JO>GGBw=<&=%Zo#G`Onv&W8nc(^$*SMlyHAlD zpozdg|6(350P{OqEL8a&&2LXT78NKHRfdK84g+XDNnCVeFB;BUD1Qmk`hBCwF+_<}o zo;;kM^XW!KPgZ@_3tySxbB^8Fq9?09=joNH=N!F9i=I53p7Z&3i=M3dj2FJLP48D~ z%v#ZN9$?k$b7Kn~YTb2Y^{3RB^HmR4eF-u$^~%(9u3$`+W6LL*nu++SrdrQ=gs&Gp zc{n}i9KK8Rbl%ejzCd%5(Id6?N)SR z+1u&KsxP`=ZTQO6bB^R4L{C<|)}IVtnfmA%HRce}lU1Mg!dIp~2h9x8lU1Mb^vcx7 zzFA`yi=M3di#Y*{My7;VTc7x2^Eo2`&GQ0au^*7{a_u!Y4lr zuFhM$P6ct1cihjlv3!2}TC+PiVna7(e~;@uKFs4e9v|s3f*rElejXaNzY|f^tvF`pGZS@lIvuS|XPe)Jy|Jz4cB zPp?dU7MelPlZVsSJ%INt(UXVMr=dAj^kmg1JbRRBPZ63kMNd|}-XmJzpiF(~LEL{u zPgZ@@3tyS~$U`+|o#@G`&v<%e>T}R=7BiMT@*UvnvRCr_D${TF;Tp5;0nRU3S=K94pL!haA)+U%J{2nKm8mcOzQ!CTda~+cTa@+6)JKXa ztD+~XKI)}cnff?1OGHmrecID2Q(u6lQ}krj4|;m?05lQ&%fB>uzfq|39}JuSCgVLO zfja6O;WYRHPk)uicX<4;$3>4{^EiB9Io=&TKEUHfk7FLs_xLD}lO7Lx{0)zp51riL z&%eKa7n)AzY%T#;*OT#QYRve9TzMn!4X!S$$U2+PEeKzEsJMFISL0d(u8u2#@c$xl zk^eD7Tsbc;WuEuCXKT#dgPomZCY9y9;OUjAFGBNK(UVngymGE=_0QFqUe$wD9|@P! zu1vjIkN17ilT}{?kXx`(w&6ctW4@)~gH^Bf67|Z|mtLqbmx`XO`WS#ry)yODmr&=3 zo=gq%M>W;@)XQiK5p5;^z=3$1fnho@?qMcdwVAV&x{8wi9*}vA9 zKZ%~K`qiFZS+B}hl=YF_|>@94-uEy zHe{Ahc5#uv46cqV;-yQO`4EBrQSnPw+qAqf-;}A3Zyz#$5j|P;883Wg>Wk34FM9H> z(Xws*9&0!yRGMVQtITi;JBQ5u&@(^D)J()Lh98-FW$Np837Ka^PgZ@}tD}^u&+LwQ z`OsmF;gctWtMib7FdW9EZ2j&LGGA4{;IoJDoALZA({CgaGJh1mWCqQ2MYb--rA&S7 zP-vz&J1vX8r?#vo?* zGv%dA*`{l1$c&rn?2LdlUB7{Uatk)fLzVdm{HksHgR5;b4Iy)`gipQ(thT-7vBsMN zXuRZ4HW(9;v>fU2=RNN8_!N)N@t9!_W&aPMQTwj}(|*5><$6_XSrOdqLdR1Q*zhr8tuLF>&SEfGF95UY$J((KnQ{MeTnR>2?b&=@Fs!zZVnc*u_ z&vmn|6g_!3J=fQ|LG)zRr@io%89vwK%8Qh zOm9k<;YU6ZGOvoBObzq1h##4HW$Mi*L*^aPlU1Md^vcxdpxM3&VG65W)5!3ZsgJ}$ z=3vp2RiE(AuQK)NnIY38da~*Z05Zc@ranG9WafyTObyc;1(2y%w&BkSna^wZVAVhA z*+cG!CIbKb`myE5~t^eNn@#4lO( zdOb34m8nlGz&dpr7g+UqFMMU{Bk_Onm_t(i+i|RiF3X@s+91EXT8-=*g-tde0%s)TdU4%vqu* ztN!HC<@_OE1Wg3_z`q}Qd>xqg{rvM`^Go3(_(4zeJCC3Cm~jntFZ&BLTK-=LSKrIb z0P=9UD`Vs|xVrqu5jMkb!A6g%)^kmhiz3WAp`pBA)c~A6Y)z<;Yv`3lx=!qdS;iE3?WNK)SYO3|IFNVxC(UVo5 zgY$_&2<&8I|9R=x4;SGIZ#6kn-&uPueb$fo+q8TG*N*tjgVi=I z4@`?P^|{kS=5mb-tokhCBU7(Tef*4&xlQzB)ki$NGW98F3Zf?ur_Vt1l<3LB>2uJ$ zsP=pM96Zu5?N_Ef2~3Fef#}K9u&ieBQ@t|v=361N!^hmYAgey=>6NLELbIRf$*NBS z$h1e9`dlVtri-3T4eg10;VWBv&I+0NY7bcTTK*Znvekb(WIm^QuwC%zLhXNsPz`lX(pd>J&X!!s|0t!Aj}$e-8Z zr_l2{^55MG2!HR7yK_gL3a-A65?;K@v@`nMkol7MC99ovo?e;y7&K>#o~-(ar&qT5 z0L>3XpYZgb@bt<_ls)oIUqb%?S}%lD8L@f!nc zTB3-H+=7iV^(kn6AbPUuBc5KF`V2I;h@PzatfyC|K6-x0JT7{&>h-#&J<8Mb0CxuS|XBqL3N$Ntd@|)vFEED^nl)KHhUhPgZ@*l=D-W z`ZP4nq9?0f!>kTJdI{ER7Cl+@8YcD13_k_Ua?z7jzp?Nmmxatpq9?0f!>kTJ0nIt0 zC#!yA;n)2jWPT)ivg$V$ejJ)RMNd|J9zdo&%1m$FnPP!>kC)leMI!+ z;q;lS@IE4X@^Je2)wl<#{b1D>yytCY+8?NC)UX2`Yw zA@l`kb{0KZ!_Rr=OPS%Pe;qOhiJq+bw0FLgsW*>=%weJ@tG?jbuS|Ubnt7rptNsSh z9_69#JO2DmpF=p+_npk+A@i_=PyQ2lEo|YR##J0s&Rb>LmU<>+4w>olmaO`O_-%oM zvP}y#G0}73o8k1)XG3PO=*gsXOntf(GB1mstojImOxu*H&;B)J%q*9;WNH|G6hNk4 znfk(OAyX%MGBwoKZ&%incZbG)D}OO;_7hHk8-+9Axx!g+TsZPl*c_|;a@Zun5rogb z6Fg3fCX2~1GoJfp;$DRNk3DzVIaIm51DZ}7I_3=lSC`wmQDO7Z*)D&`aqwEvYue-3 zCo`{>ad=Y#T4 z=gXhBZL7H(raiMq*nAQ0Ogs5>aCO=fIL3IHc4gXD+B0l^D}Kq;OvEo!Th=R6pPm>t ze-=Gi^~b^wncbMN56ZNZX{eCiR zQtB5>4f8g-MOm**eSA*Xd{y*h)#t)xy)yM?Uf7%~da~+^0CEd9%G4J>h5AACWNK(n zzZX9Fc4&Bx>fQ;PUkOLSe-NGxrr)8?-Sg0N;u!y42UlOGiI%WgHqYfJ`ODzy{H%jt zhEMyIX@3g(`@}Dq8rrX#YJD1---({A`ZWBIsaIzB=E$&lQS@Zh$349=^>JuE5ItG- z2~V#~eGZxlpK@s@tNxBLWqXu0Zzn>p`Pt?1@nGid@!oZjItFtoOZenhz}0zM@N842 zZLwp+<`e(rY$K~}X-}_AeIA-mi=M3dIsmx^8)fPXp9z~b(UYm+xy$3HdS&V}pADN6 zL{CWiNXn{SAotopPUzB2WR&!Y|zJ^3o|26+V?!)d{$AWXl}MA-a8{F13* zTJYK&=*e5pm%0wu%TC}3-1xVj$MieYxo&`_)2cD&40wZcjd-twJL|v{_%?90{WxRE%_`B8 zsrhI2#GpA@^kmhet49z%`P-kk?{v=k0&F{r8nc*{k^m=Dp%G5_!h0PnHC#yaSAXBeQ zeW3@}THK|JObx^T4S-C&@=*D90Q_pc9R{w>w_FO(*b+YZ=iusmV|*Hy@=$S&|8zO7 zUBK0G6%qbPaG!|4$Qf{TTtzP~W#&Wv3t{uL_$AXG+M;EZ`JhaF6b~YAik__c2!Kqz zGWGF+uo<_|*+!EP;oGlOCC zvcyGxZ-}_^@T+zzTRWkj*Xq)h2Wz@i!+cPtK7D-H94&gX>NV}uD^p*B<~Y%lRiE+f zQMTcq5H=@j_+ZuNJiRjY(bXs?q9?2Vuby6csJy)del>5e1Xt&6bWPZdUF7nIybHMc zJgPlRyE1JnLZ1}BWVP*T&o6NLk z`*PSkDSEQ%W1e1_`ZzQt(UVml_4LZrr=bZiad|~neZtc#Q(uH;g6PSr&v<%e>Qg6$ z%^{*EtG?*zm970>L46|nI9T-wPp?dU4w|{5C#yc~>6NL+!bql7^yK06IcSz^_@4ei zc%qoisLOuXoUB(LDbDgry zleK8i5x-m!n|4mbFM*%htW15~*YNx=da~-%o?e;y3^d;tJz4b&N0-AV{|p+NC;ucL zegTchCq?Zeh-!`5R%*jro``=e_)cFz2-VlQ8G2TrbSIC|?%lJd>}f<^h~X zVa^ZvuCSf^@iQ(T;tyfYaAD5hxV13nW86iUb1m*C%y|@>ggHmzOkvJ{_-SFzZMamJ z^A`3Cb56pqspe74WvUwR4}>{S;B~^B1Mqfr|2^hr7mkB}C(L>Io>9${#=I!Z`Sjit z=3IH4gr4V}^WbeI%sKA16OKG(%wEEro9<9y&O6sE%sJ&gAAGwyRPA2?sr-ol)VsacrwCe0Q$yVjVv>cO8Cj(}GPN5KQaoOg(8RM>n5 zpCOz9pC_CHuM;kSbHXL?ZNi+N=YC<%z4N#*=hb;mm~-H~EzJ3CcKE!Dm-De4BFuS9 zW(afcktM>37R*7R?wB*=tLlCX>=fo)AJ+=UP|@Bm%sD##Ak6tUxJCuj%eggb+Z=P= zj0wV=6XOtJ&UZ0em~&Yit9(k0SuV^uC*7&B`~_n1#X|-`y$9vD^K^9E<%GVUDvtU6^C2 z&ll$S=qrUe_W3$tj%&VEm}8dj5$1U02ZcG-_z7W-BYswxV}xH3=J?@%FkhbDq)UEJYU_PuQ5Ls=2*g8 zggH*|K4Fdld{p_B8dFrp*u7VTIWF&gVUAO)Tk6unF;@Esb39Z`m}8DsD(?|8UsQbr zV=;s|PUIS4j{CS%HO(ROYhjMp_#a`8#rTUb$6354%rO-233I$dU5D5f!}u&=_G3R# znEle5)g67#7pOjte*VJj`@Kq-{jR?v%s$d*s0RI?&lP50-*v+5$9ugn`{@2s*q{&I zqr&X_^qesJTD&dHehz#X<2B1Z0NV)joAvI({5CyRnBSKV7v{I)V}wr7@vV`xhZC8a!rw-aU?<3wS$A2tcIZE&tI z+x?CeW}9A*a15LlW;@uogwuFW|A8>yC4VN&_r3>&`Cju|VLop^Bg|*%zmaP(7xg(< zGh&(J*muHa2jTm``v{NwZrDr_J_0;LxEmZ7J`LO^d2p<8yM>q}st?+~3XN7CC_!c018rXEXv|J4yFMJbt z58?ITLxo3Qf_Eqs~bzFv6rWnpu- z@HyZ|gdYSyqndTN_JxlCe<1u>@HWS}blnQxUAPE7M7ZGxVRM-93h<|d)8J!-F9fd; zz8-vnaP)^^bE@#s;O_`$!Rv(Y0beKlHux^#(U+qh6K)0y<7o z*MoNxZoVRH4i-*;KPvns@I2uR_-NsE;N`+MfsYriy%Oyb!p-1wgpUAUCOiPXR(Kuw zPT_mN1>yDJKML=56~2=SuLi#-{3v)_w@ZupQP}J%d;s_$;RJZP@Oj`PgdYSSC0qnA z6E1-Vh3l>ko3+C8!QU2M2fkGJCh$*%9|Y%xKlbCW`L*x>_-Ww`_+{aH!0!sb1m0?u zOUrIQK^v*?Z191?i@?poUjiR4d>(j-@Dt#q@NU(3v#|NQFxT%J-6P?HKO&sC9d&{**C5+p zm}`(t73LaAbA`D^(r1OaM$+-ZTqEfWVXl#MfiUMnStrc#)He!qjMW3e9Ai}wX21QX zg<~&<&0mDsH|%e!0dLvs(!#!B+X}O9*sjViqhFb7Ucs}0F#CPQgxQDcQ^M?HbF?t~ za&!o@FUJYO?8|YA>cQVsejoQEVYUH&U){k!A&=pAu3B@GFz2HD1$ir+>oDf}7EXX4 zQ^q{uPbp)b@aL2KdYKQV$FBuXN*}b90#99M%s%Hpq>|Z_RYIYm~&`c zE1E3w|uXbH0)F!W@V4jxgtj8r$#e=e#|;3v*tbs4(XqnWgUVyF{4%A-lK|hkPyw7s1a8KLvhW*dYH$54gAvK=={i zL%_{so@?a8r-V6P^)sTG2+b!ph+$b6O9C;Xh!^Ayu0NUlqu=76H z^N{cp;6I9f0`mN?!m(%YE;H!Dse}9WWaQ5dh<9%??BrP824RjPo};`tWLkx}e&tf( zD9UY*asqu4gxOc;Ofqb{e!p6Cq3}K69|_+IzDf8&@V#WDF^_uk_reC{|3%Rhkgk6S zKMEdqyx4pU?jyn+7k{X5aUZmY3&#>@vlr&tqiw<*OE@UZv2Ujda~#GCR3v;gNxG?8N?h?-Kjd|^a z`EBU?s`(n;cZ5rq;1yn&YdAh9%=I7N6wYVy-DHikfqfdcQ%0RLQJ8Z?Hwkn8=Xt{H z=k{6ULoq*(Fvqc;CCqg*FIN6y$lRffv9ym0b6oJN!W{Fv4f2cUh2wem66QGQ>B?yH zIZ~K?+m;G*9_-b^Ii&q$VfL^4mN4gwzEqg=ir+2F@34=Mc`X<4-XR?O4c>W0!+vq2 zzvyh^7=hh|+5f*@m}3p*2*=@XfiTxuPN?Qs%%>{Mb*oPz<9VPC&j4o%m+)+Gk#HXT zBhlx!H|AzxeiQ$NFu#*Nt{U7QUr>hoTf&7M@O|e?&VKfz-dmV!Ro9bIC#=Wy`w8I^ z_*24ffENqD1Wu57?R*mB6off9$bSoS9*^$`bB>N5laaSE)FD3;_X66d?-u5G)yGti z>wUd&9M|SM!W_dp_RB6_jtALOI0g5E$*})X)K{MrehR!uxBy-u`~>*RWZ2L4_|t^B z9`yO@J_l`s!tA4-7iQo10vU0=i+m^wzYTsxIE(P#6}|#I?j)zb8oY<_I`AYi>iG$% z=RZki*+c$(S~NLm+Jy7q9^sq7UlhI%{NH4xg?-n*Cmg%G#{57uk*T%j8e!8^Yi?Kf z`dV|J@`1JH5#>YioT+}kd9Hjj*31%4-G%Qs>V7-c-xQ9*{g=XA+wpN>uABLyuw5ThHPCOJcJ}1Jy9;w& z%X(q1Svgyn>r1u@bM4M$!t7(*C(N;XC#xRg1kV!Yn8z!GIes%Q%(04(3v=A%tE#yQ z^LGhzEa5gMJ3HCGdLkM1z#FIs>cu^eyqYbX`W(KI2`8ZM6Xsg0rz_uR%z46`&-q&6 zG{X6XaDE!@3&Obrjd@nM?jZCz7fyV_VDU3&TNIk@gi{|iW>4V+o^ztY#g7~FapCO8 zjQNys^f0WcB%DY1U8-*~=6K-(;yO*Z1UoMij@^Q9*}|Or`f=4DT_s`8KRo6XIoHta zF3kC&8-+PP^8#V6liMlG@wtP-9BX{Kuw92&nBxks7v|XKdxbfk?r~v`#al0I$72d} zyl~xGXB)>RA0o_guQP=?hW8lZIKoK@bL{G=!W@Ttk#Gi@>s62P`H(QjRu_di7Viz! z-;DWczUFM;n8)3O**`xj%>H|`h1pl|Gs5f#*sGc^pdCz@eHYIY<~qVxtNWU;xmB2b z$sQ!5Jf~5fpA@b|UGY2_^=A=v*WX3YInA~{)!E5@dbeVfKYPQkebj z+Q^72kGKZOqws!xH=cWye~IT_Ve>Bft_!EZKLXdd?jz>s9^d8hgC0NW@p_N{;qlgA zFNZn7y!C12bnWHw zG><>w@lVm7aV>t=;decLH{ka({BFYU=lI=>-!1svir;Pc-HzWK_~r4t6TiFgyBoiI z@cRXR_u}_U{O-f=SNPqJ-vjtPh~Go_;V*_?`ak7&qqFHh#vaX=&3RrTX7b|xWMBW} z{_ftvmC2sTslMLhk{tv6lUrxcZ|hpszC1ZOxq2Yk*VEoTxw~uW3CX3YL!*qz&b+mU|7iQC3W`#Sxx@(|(cx7uxdk?Z~ZdW(F%~?Ir=dOz`oTAN` zb2d6H%JW*1C*ZW=B=(Iw>o!?JSb(dG?}%%}NpdN)9iM8}%VC~Nd*_V4WV^dS=yG^+ zVBz62EB23Bykv$rv?d4U9eG4=@5+ADHoJFWa#efEv`IiBS)A%b^&mSlQmJH5XAoL< zGB|>~_ri61qQg#w2{=Kft9NsjlHN%{89|wzHP}DUyJ}wVCMYCKMcbTJT?4J{t5V&` zPMc2dyE_Fke&naxp6iWPgnnc*8t`Y@T>9dJ1By7ygE+6weNnQ#ue0|AT)gzUFxijG z-5I_~O`SA(aGR8ptd=yQ@wpbhDjPc$4Y-FWR(s!pulx*dr!xj z;4B2rfvCHE&1SvZy7;7OcNgeGxGD|62m-d9cUjI#C+Q2UvsNTKRsi+84tJvpw=_HH?!X9=4{LlT>+V8_M#e#h zdA;SQTR5Rq=-nLQxjdI}_|&ujj|ouW&=K~6akjb)u}5$t$AvSqy{8k0Rvz26{KWR< zfW|V+x%qD@_`lBTvQ^w`pd2h zlc{9;z>%o$lT}BkIkJzhW4PV2>11hgptbA7q~Xi_W~?1-bXv#TTa{LDBfb_SC9YWk zwJqP6dsiKq8on_ISnORMrw|dhui|CFTc;RMuAZqxF`kR8M4jKi!2wtMyOMx| zo8aZeUQt!&pH{dypFVR<%FEDgrh7Wb}U<9C7hRK$VS^{VA`dvOmRUO2)%- zy}G$+R(!E7A|or&h}79G4+0u$=O$>?`7jA$JWSA{zV@E}Wxai?j>OZ}zRfZegq-nM17VQq?O>q#a%`^&qnU2JGr;@aI9 zy>mFC+96PMZ6JY*Q_t`1O-(@%-X4q%e8Tv0sDUed2hLz|Zw_2R>QWm;*KE*wVb(Xf-Qb*7 z9Br;RD0}6yS8=qysjJej>`KVZvRhUDoR_MK%Xh4ftxD=b4IaTq+E(ykZcIUBJY%d) zx;h4W`=TR1TS35RNDjh9r4ukJo`9!%jCw9`Z}b?|W8gl`W7Hvm`*e@%QQrjz>iwAO z{iy2^H!i>Vt%FPLd*0z_HtXTD?#%ANH;etr;($ z^LjdytLO3cxjz}yy)M9wAGfazPBe3{r?We0r3?6pf|khZxU~U~o6d2AI7a;N5S$=+ z)0^AgKQO;{`IOdf`EWL$F0Ey!S-q>4q7kOEbwztmPj3&ttM%bSrP_?lXhm~LbuQo~ zp{sMSz1zOu;dP0@X-lOITX%v})o%t<{ru|C)w6uFR9aqiya*P%*pmyFFP)F%#@o9_ z+Nh1|(2HXeT-DOFqL$8F-WOQvo8P{nE2KlX&gk>fS`h+2ylfZ>vZk@AvFz?X68Ra{ z=A0@l3sjy3foub}N}I}lD=iA#E9^OD@Oa1;^}-_4raQ2uyn`cXM)3}LdyKh!j7r8? z;eyyq8@?HKud&zig2C>AF6<2D=KS*glTUOg<*Nd*I_i1sL#-mO%bK@R7qF#)M_h7M zhxb#29!SLZP-fBZhVEt4JPXPtRi7Y6T+p@1FT)KpXVW|yRmX+flSbv892=J> z-E2=#)o~7;75158#OI|tE@Z{x4J$wQ{Nf!5F4f8--nG8LfhsRUWVrRhdTkR_kHeNX z#>0%o-PX48jQFDxYItXRTW4=iauTW!1if+zY9L387xf+8f-&k zvS;MoO+L)?ALC(G;1Q%7o!5@&LKgzuBSzYwjHq1-+U5n1MQrl$cJX>19P-`mn``-y z-9_oBZ(7ZFUPpN512nI8|2C{f?YzhfY&KJ2T`h@M`#Be_w62%Xh_4=eD?kz_<0A_G z>5}&HIXxZ0yE_^H``R1$T!Wg~?$kH=d+xnmT-fK!T8s~Lwx<%^(YDar*L7lV&p>;( z+edLh_|iv7KU8_I`Q=ynat_*}wZZvi$t#~5t10i=OoyNxh`Jzww4~f1;W1%ut zeup7$wwq88*#_ytN!kQ&@EOesd+!{v1?|#j znU@_xcHipD@3e4o9WccSuZ<~u_;G!VKh?W*6J$Zq@zAArq~CrKN_Eeg6VPAO^{jD; zL>~v~%4OQopLDj-<1RXBLZyN3YIEkIH(_~qE}ENB6EO+AAj`Y+@X}M^Am89T1s=$k z+0U(;vDit3JQG!4N4iFSfd;9m{yN;X(T}}25_}Ed!^ZF* zl1E&ve8?-lJi3TOfckKeuy5`rC}c89s;!mz---bxYx4Gk$Qrt$WE7=Ymr zUWZqlIHy50=(6gn2smor)*1Lxg`Su**9@S?a`d#$~$|w+Q8m@54~<8ncbYzf2C>aThffYqVn8~|F*u0Q=8m9P zSx48ga?Prxz4&O!mzs8z>dkmR2%?lzIZsT$RRdE;Tvr6a;~XMGH1w7e@%YI?Ug2t8 z7WKBAXkC$2wpDKN64$pM-r>Ygy?VGcxqMX;LqPnH?VF(7do{L&y|^5c;;6wk1fiK@v+3C0Go{?M^OJRu0#_SNO6qjEmM)ip@C7)9tBB%D(UJsi*zbu(T98Y8a&K8nYk z1@1+1#AiiA#|7X8KCgdC7e_VFX+d&TZ{M1uY?Fp7ES?Z=t+wSng~u2SF~cX!;F)K> zePHpl9CExtkj?@5jyIk8(tDiUWGl^a#W`@Ul$U#}O4hhiUUsgOBlMvIAIg-VV{CQM zzPN0!i>W&1AjaTug#otF5Y6@&S7S4LW;X_tZlcyUdF|!rB|H`KWN<7%&tR&2)&|NW zV@zH5KKznH{i0sip;&7huM9XRWXRDKSrDADO6OVVB2uAq z_cK)f96Tvc$6n}iV6)X#czVYmL%B7v_IEYDJgklQ+H}FYThoH}l}SDl1|NY?htW;G zlklsGtFh^5Zw~tH$Q$9#XU0W+$?op1{)#5@k!P6q9m|VPZc^w6j7Mx4W$$d$*E==C z-fU(kJ8UBnI{N6xsg*Ok+WQx@5A=1RIT7xtL%x6>M12@a}FCH7dv7LKV%NsA&pW%=DVBqrWjO~#It94 zwB#y2E8)9kFFRuKJqv>caUr|0Wc}zf$~@cz7xbjbEBpp&`|8WMFffrZpay0Gg?+)Z zjqMBC`|*D1Qf*yZdPQ!_t>lM2!i%`MVN&C?W^{~Q$#BprV289#YMjcRvnb*C{?*tR zZM1{hkO7I9fWJfPW9vkF~YBNZY1htv$Qqn`UE3@I=Ro#kr;7rk$GZmH^|z7+qL=f+_8yLb=PoCT zv3vgKyno-h^kdPw&{kLW!`;YlnC^7?vB>!>N8;|5%k0O85r0JfC&gA{U^0VNxTLnG zZ;Dc@F(8Svdoc}HXBS$8P;hazqw<&i#rU>X>7t6+z1pEmU39@)_R3%T#$**v)rb2+s4Z<4D}W5Bs!$ZRRK4V#Cs_IkAYJ2Ax-M<=pPUeixC;%f&rioCZL1SDqq$ukM?L3MwBqg9pmC zl`RZKZeDG8qrpw<-&p3WB9h`U-+hwQo}S50?`F6u3Qbk4r~&vsz!^MJ11oU87%^VS zy;$WWI=eh~JdZELofxAv-CKr#Bl|aITSYX?v`@3$`QLU+MoRoiP&b?alM@!Yv1CKc z>}aPmv|lgy$-oT~`#+s}@jqc|L|%}1T|;@%YjcRn!q90A#X{%6@+VlbvsPg;M-1lJ z=qyle!_Lp70SqxE5el<(s3!HRRL3aIIfrur91-O4y&;rgIJ;bzbQc6`wt%p z{_mXvBsiUJ7(&p2%k2iewR;_gizj^E z!=)$25Zz)o)(e)eaQ{kAPU+C%mJX=y{NxT+cA?Ss9lVTsomjjM5*zKLu|Y2icKG!? z+A9ZlId}53;0NzFws{@-iHBLf(jcMLpB!CQ%li(SEdQl%gcTpc{_`8VE1Q75RwTbs z2${4&3j;qZRXXbH`GAr%l6bNafw;h6=yaIoVP9==7--;)Z75jE2UF zBs5NK_Wd^2H{hWw2&%EZB7yi&>?gl5T5+^t%5*=XDGgKn6iu00kvUVRRQjDd9al*Z z@6;)b$j-;?{y}DN54Q0iU)sW$e_3 zip!>qziXhVhHX7DUE(m zQyVH%)ExDb-xRILx~3_Wr9E0v#nd-d>^9U_l*xu@qo2UW`lz3TDbx9m9;9f>^a?Xj z_AC5Oo9-t86_9W9l;(QBFf<}!FJxRAe!PvlqvO7 z{K7va+FX&qXhq2N(<`o&DbWg>>zgY|d;Rpv^fp%RHdkEx$PM4fDbp%$FjJZu{mhv% zt;xU2rcA52V5d}`{V7wXRwQsrL&a`oO*o~o;+`>OdSivSx#B)IrSe`iwSKB^)zoN% ze>qQ$Hv2~ra>cH_G=g=n(8FoyRh@?HeL7rUwzif3WQ~V^zKj5y^ftpZsmW5CLTMan^pumi7j!NtQGJ1yfT9dyYJx{)H!Y-dB;!SG+{ndbMpss1EV z)zI&r7`TE%+sdGE3FZW28$Zm*#$a|Q&zH=&6S#c1F_Ig8l^?46igqgCll&&=iJ-yp z!C8A{RDX$JWBEo0qz2E;`dMou->U-MKmSUGZ<=my0dJT#H@}MJkNLC)%NT6j5=2cePUO}g1Q}Bv^Fw? zs$x!;Ax2gC79!kgBg;;Kop5rWH7kPlM`wwRRej^dwcL7bvk#$ZYj>AAu*6jaPKWYo zftO%>ESNQcKTnl7xnUX_Bt;eTUFnN?#i+A?bqKZ{M_6I0J!!smL9>65I&qQNuVJly zjTJ-DBdxrSp*_2Hg4SSI@|=o=4k0MdpkzZR@9Jbh+eoF03qmAi|GJ2UsDt%^AguTd?gA@+IuDA6jVIW1xu+$?KPLG&uWHl?!kt$! zR)mI>+Z=5O!TXTh(En z-f&WN(xxfKCVm;HvsfJ5_)_K8^(SMR^qd zzci*k7)!531qILDugd}Yhd$h}e%lCcCoZsd^0M?&C*fPyiaG>c-EDW3;ES+3gTWF? zmHp+}KgyeJn_2Zw=QXFm-a^Vr9DWL#`5Sh%|8V0N5!+CMAT=$vA4KrjX47e%@m?X}ll zd+oi~UVEP;m3`M5AnD8_Y5Bz^W>*Wa66$)$QUsuC06y@?U%!Nxzii55@hDB=h{d`t z8;^(ebGOH8!1@*_{z}dHFVpZnFqKZ+YY_oXb1?@B0M^3@T`w4*1kcptsf48G5s;(% z-C5o!L?)h7sG;w>Bqn81QTI48QTI5xO3K({Jw&bl;qMO8)hIFfc2UW?GT0@klkX4` z!abiF?eP$4{Np_wr^JZ-!LOkta#%~7L^!@=IR9pAqKUkUL`YC3zWPf}vz9P?5OX#Y zk|h4DF*WLf?+f#Ut|y2u^gywAzL>0P`Q(g=1am|D77mZTzys(Pj_-PDJn3pYKe3^{ z_@T?};vq4TiD15@%T;uTyay^`))H3R!r$|YSQG{rSW^*-B2VI4e@=R~xq?!4&#&lIKR+$-4oqz1+0E?k;ILEz?`EM zw^`%?42i_YzB#dIkR)0K)=C;JRuUFv7yQ&6C1a*M|EmN^kwWhfuQ@3JQx$aZ@r1Z7 zO#J%<1iCA(JCLsUBp4U|&S28>C8DmR2yq*MW55>&iLE2y^snE!uy!0t8O7Ta$q_wY zuju*EhgAbHwLr~^IPX!FB%orCmKeZRiA1c$06n88bb~K)Cm5+)=C0w`Gr9*1^iFq9 ziRVvxI>w5!OdY!6(DlBIl?kkzcsPXGd!Y-n7NGcj7~XN+-l`;Y&mTRb=V9P$#5$j~4DfDUH*AG&sm6E?gR2lM9Y89qEwQ(gV=Qakq`XP(dA=Sihz#rVLQz-&CS6$zJ@s zNP&wKxJZGE6u3x%ixjv>fr}KlNP+)PD6sR)m*>)LHYpXg^}_#5{9gi3z?Q}9zY4#z zQ*2n`k9AHM%cHvgjJ97e44Aew{3n!rdU-ZFM}s z`k`%!|KXX5sGj&e^ppk1%0Xc%k=tg=u;5Xf=}*9`o;rEjbiN$#39rL~7Y9ONkfrPI zJp8=ay3iYk;_p0oa|M2$AB*%3ghh-9cY}?nYT6LtHR||ZPk813Axh_u5;-VL^#7qh z?ARWkg}q00&Er#^K&GDXrkVoYSqrIn_=n+5o?6Y{WEVNkgLg~-TH+PyQxUd6Ul3#$ z-#L`AN>Y|Mzm;2Y@vvZ5&Tj;_i|-zJqKj(O&I`lKwZPc`FBvc5kDPcK-0JGbr&Z77 z@6KS4IpaKdxfVVaIyMUTgg2lYylKDqSMUlgcp<9{g_Ge?JFn>muP2}MXzzVuRE6RU zhVZ}U6MWR;7hM(fq+e)^fH&I8Lg8fmx=IQkv=4Ziy6dkeyxg$@-h)5s%9D&=@))KZ zG%lbfr}KlNP&wKxJZHj|4^VxW&cpdE8~=RH#s7w1SH4yV(hsx!Zn^kX{TDnVqj*`q7xo&pK&00(e3ef0f>{H$Up_^^;unzNQ z|BkxZR%hT#-|ecA_QhbkZMbefqy|F1OrDQ@>}DroZB(;A3t-qmz3M~r{-LSyV%Mqq z{MJY#Q3Wls$tx#rQN5cfQcZ27)<#o`LaMeU=jX};%0%TsrF!CK)fk*RCDo=Hcm53+ zt@TnvjDC5DGV>=<{NO($9?5Gc`6iM47x>NIBKg-M`9(^;StPHdhNeDuX~we)fOJJt;r?H@GT$Uk&W`P1l~vu=z&nLo@Z^Sqf`adWYoT+emllL$jUe z$!Aya!0;R=AU*pM0@|T-4k=XHDK9oCbQqy+r6=UY3n(Mo;Xp?|HNfV(LVqfkDxHdG zeMTPDI}u(s*Un~U1Wwk-Gu+U-5B zm5s=8FmJJ&%~d_pIhWLelw8D=AZD~%_oMQ2nf?ql)fobqd^dY^0{Do{9Te@OJ3n9* zIg}q%A`+z+ZEKgPPVblueWqRO>?=RL8HgCeMYH;#S*mxN>YZESVx4G3*zFxr=waL8 z-R&+NQ?AI*ZE|~mUhI-rzOR;!Q03>sj@(`D(u&bY2`Ra)3i|OC#DyKkFc8lK@f^KC zyiRB7W(6rq?lwnhglE~NYICz}=gXoRa>MeP zZQ#V`L-LxC)N_<^9*TZ3!1;Sqsq>_DQgmRKAp-<+&o1d=;$hcvl=)_g*&anr&QL$3(x+c!d>-~+|3{)u2$K1 z#M}Pfsy=tRIr1TJQ>22|2WgS<^NE|65We+CZLwIa{v0X#VAlsT5fwl~V~t zgdeip36?wBa#hPMw_MU3QvO2A&9~fK%O$NMrDs_#L>Ps+(x0>X#LYz^V7G+h$LEu= zW3-KhoMP-77dt065F>hw4NKs-SLEJdDaAv<{J^=5qR9)rq+Ph{m(FcR&RVx&5&+Z&+4%3~2_-uEB`b5D6(qUw#gK#!!JY6K^si&f@ng;y2ckZP3YBehxE_z?0T z^}E`6m`IUZwIeONXt&@@@v9eSvEoZqZBwpVeoW^`qjL-@ZDnTf!V15{^ zHZQRLRET($4U_Rdy=B;s7DR?!NhvB@NJzIVybZq;qL#EQ973VGbyIWqa-#99_ zif%2>(N}e%b7DJ6S5Z^vWvSYBSzeQQNzFD1e^I;c?vup`#Wr2dVZmj{%z`=mcNySe zj&vK>{|(2j(c9#KwtzMdP<%39Eq#UM(EAhYwpf-++hTWVExE2(#HGcuDcU;1 z-sYPoS{0jRUydEeDchn(CJl5WEd)5{k;4B+AU@~+ z3F5C6*}-qcVIUt;VtZ-12(qNaCtYW zQkz?^YWCKFpNm8>-|8CSBCp(}dPAzz>DHYgkDlRXnZ3?S z@w9sMOWZ75azUKAvCea8VYm>+u}!LWCd0o9lX6MY5}xquF3;_@uRlSW3)LbL&KWC-VNU|fd51Bz1_O=@yRey&lp|ZE95{!4K z9qjGV@XITAfVj+Xz`x660hQ-&oWI!=kz6<26db&PVmSkDy{p2YWQ3(ZAk{8F6tc`${@!Bl`&(` z2sWRV^e*Wnfpw=g5ka(OBAn!3pv`~TR-4UE8~52UK1r+^X?`4U$FeX%0gkh|Zjfs8 zT`Cgwst=GpnWt;>m)UAB$HF|h=5bef|@KEg1fE^$j|Xs&UmHdB|>%`UO|`qiDzpK-Oa9!<7I2T&kG zS&tEAi^_GUFPn9=?sR|oMcTF=;%&SK3x9_()oP`KeZlrS*&(#162<^A>`1{Y{uO%F zY6ojq*ghvajI=VI){PQ(i>5gA$392`a^1fGas^N0JkoY>@ zlBMSXIgw}y6F{0l9~&r$$=kU^P;}h% z295XV9RR*uO?{dV_IOtPX+D0XRus%tQx}P`ohS?5tJ8xt;?zhTi5&XVc?(bN)2o)1 zEhVhiQmpK5)A`VM7}K({9Hs3J+1*YwQniguL{49tv-H?Jdr>HQ9k{|#aKyomnt%I} z8cldFB=DG&<%Z`u(?hg9TZbq|>EYU6LL3(yIk^c7`d4`3{N)b)4>ZIfrH{D0-(o=5 zxuoei3i}WnZXv@IdF8jN_avfok?RjMfRGcxeA8>|?p#*Jg`{i*5p=QdUHW^Xhrm4rA1Qi(nn^N@=9PV_ z&ZV>}wV2EAPsI-8JwBNgoI*xwVfYY)L&z<4A|vqyGP>E6|&=KHYGPTC(U zDiS!pZIs5wPtuF7g1O#Gi z-gMx$#x9YX(EpdDjPO!%`qM(P{u~Vk$*PIwxYUYy;Z9Vtkft(4U(*Q;OFL@QQLTts zNb8@{O%$_`3XnFdAEJsvYli@qJg^SG*s|8nw)w77fs=D?DLNUwEpSp~ zJV6=%-OBiD%BaSm2I;iRfgvPc25IMj#n(!3b;}aUC9nu@BqR!UCgX6f^wj+SV&|f7 zplK8Ee`@r(qR`Kk2ci4urawv6AD2WLY2inIiT%GHi^T7IBUNJ^ZT`)7??|QH`Dm5B zMB5J4&?b<>G}=_6i{Cwo@xZh!gtT>>cjQ-T^6OBvmJ|nDMWZr$XG9|x|7;4^y+wb* z9q?jrurC;fE68zAo2sqj64##wtz@*H{LYAShy0FrD70~hxxO#e z*$fv-V`rPkc*|am!KUi#Mx)nMU7G;MU24v}$Gl-A8XVyfgd?W|c3oyJ2n|B={6vWV zA_}lKsUWmlZf2@%orz5@WMW7)GVfLy-}5@y>F{C5v0bY4H8#9gs%#a_vqO#I?+Lsc z3RP*7+sM4q&GZaHLfYhFZ7!`f#jSgqF~jv4X=J7&F^ekF=C|6Yf!m^Xt4t1}BO1wA z4vy)xIJC&>>pRNGd>3W;f-$uU1RZmD+R#)qtZB)(^_{?udQ?b29 z_ZpdfK+;y^q@70UX%~5W2lb+}aa|puGoH#eHqRs_3 z|NTzlW?vPGG)0C1CiNTN8}YS-t`V|)b)aj69K88rlf;Gs@S;mm&&k?D%9^-#plCIC6E?{P=^$|YYpSqRK zMOsw7Vl-wDUmBk~9IS&2lJoRm84wj438@X#&88ETp_JV45~5tJMTyXaV{=6o(vFk< zAoqio+(+z+F7NU#FW34aFETV)vCu?@;Kf>bg9O)n{fk)4WBlGk)o%8=h&u#>Opoz6 zc8AB!EtpT#zyX)+_|(N7q$oF*MYmo-**h!(W+Y9*$@3?)v*3zQ^fD~54pG~DUu#2B zXFw5G3AOJ@UoX)pI&JAi8ZW9TC^4(cB{G!QC%-6hfp0f zTUkQ4Yt4U_zFcm28Fj|%kQ<&w2=&NM2Pm4iE99G}mGqr4t9xDPsy-bnUtSyhqjObJ zAN*>*i)DDIb-Id)8ai-KRu@tTFUb;cOdks{==uUG&r&mr!>?3894=;08r%- zjnu!KVfPY6HtwT-k^}GJR}W?(OKcm_qbjg%b}^K%RIjrrl%#KU>%%*V27O%82{#+w zsYzadKE*=HUxM}sY`6J5s`hRZ$rRsp+Pfk0_^(o>CW->X;Uq+h6sl~;#P&bJMwp*f zX4Akl?tFVVqyu$6q(g5+ne*rb%ozMf#3T6yN~YV^Nd6Q2=0qe5!Y1)k*ZQIU7_CEr zrpn$c#9~Db>?e9A=+DV*wNL`pmzL1lxd0tvl#|bRk0Q*w7jRiQpKaE@OZO}5poa$# z4pC3nIwgOus=rEI>ek;OkgkG*F6~@zx$zm)#&c_(DRRRNNNOL4AFC`F+ID?=omPDI$g_Gws5VIL?|FT7spf=OcOuS^Gm>{a3m9E}H>kl)O3b9nwf z>kw;ezn@wnuth1}Mf#{h;_rUioP1ktI?o1~bAT4sVyuL`f9Ti2Ff)h5YoD-gbvvvSsYxG+Wzd6Q z55$jqpcFowA%)>}3`_|h%92{cW||g)ely<0CSc)ae;}H;**ip&NIHJvc!D=LEpM_Y zTMhXs#uzhlsf)@Q3Bt@tJvlN}4um+ESBZ$)TW>6DN|UfvpUt)4+f5+Fl`~^dD*8rO6F7@M5&c z4M|LUKEvzp5wIQ%Z(&J83!4l#)ooEsug<^_<86wI!c>mh;ODuVxYIujY!MY~@oPkx zgDQwE0yOybW@@zFbc~Yq(GWoU&B32y^uUrLK$x=}8bX}+)KzkT?%jDxPst5ekf-33g{-@DBXy4a^fidK;)J-B{Lqxe%w0IKq+$Pdf>J6dEFYksgP{U+D6AqEYB^Sc(;??_GH1}8D_8~2&zwyzmJVHM zvxnUarLV%AP`PYTm^}|B5U>&Ag!8bwacbojaqmj(JszCL^awpUQw6Rfk0y67f8FR1n3Nl+%v*hg!cz?SbQ zTU?;X4Xb(hy$rx?|Gn@Nzn(96be<>HL-5cFwjGlpR0`$j7(rCfanY}0K|$Lfr!DrM zi^eL_BD)d{5P5@3iMm)vXOV^-F4j@bC3;0Jb1u^>^0=zAA|G+f^@>8~T;bBw5omJh zz2Gz}y3@u$S>2AD&~xz-#E&Jh!PEo9OFA-OD$_Vo^@q^cw5!FLjXgs(45BVWrv`|Y zINUTmbqKOg-RzwC`#ZQ;Y1mB!#b)J(!yt#Cwf}m;!y@uc@mYlrhcYfL<;D*{c+rVa z*m71Y!z2y*Jadrvn0*Q*84=rj^;2S7xj{#C^bt@F1!LQ;4XfU;+bFIBZdu4S(iqes zz+qPCPv}H`8m|DeBV`$Gj6IQyjWm2GGTKQY8{rtC z&#dD|!f_I4Q^pU>BlNNu?|WD zs8}1@muM#jr7iksA_(alr$JmKH=OE<>oIGV@`ci@8&#bPbLzj(Cy7~W75be|SH9jf zRRtzNQ`F3%*KeVPW77T$B8_1O36XXwoVC9cA}s*FxqlGF5B{Y{{$>c09~H?@QSw@m zJVGRYNXgSg@=Qv8NhIGalHaD}$3*gjlsr!)KPHl2pyUsdfKL?3w7CUpvnV-*#E#ML zc`AJ`lC6bt()u`IAC!i@gFlnz7))o}9tgW->`LW^0HX9%tur0lZ<6=XPqofo^3sq$ z16ELmy)L>_*McaAb*-;IhQ+!F4{}JlCMGAH)>yQ=G1hTk>2u2wF$=OAnj!9o!-b^O zq899+jyVWsC*J4Cv=@GhkTLk*@8ymAPdIBg5J;onQuxhZlwH8y1^c!bmT1i1Ol`}K zw=F-pE3G#E1$6Az#*cU#!_>wwwGjqeRjs;C?Zjd^T{|uLS4L&gQk1p5OFx)#VNSsJ zWwZ^@_^OqJ$_(lzeF?%itEiydXrNx4%X98XUB$WP zCLFVZ5&j0W1S2H%T>C&`4`Xm0XZkxCoH#=?z;BL5O-Qa6$-kszYp?h;B^Qb0-wx*N zG=h?UO9&YKUPF|5sYupD^39aIP9!g<E`8m z7&B?+y%02*`)5OT`-W=kh?6AZ0zu0S00}?wsQDN28|y;kFWDDwJWTZ3mr;r}I*q}_ z0zCt~zxHE+ULm13mZR6xUO+phI!G}Lv)H9%zsQ_#(Q&-LDB}E(UWzC>;4C_+vWZO& z=3fuD75_u;VSm>C0@Xuj=(lo~o{06rMDR1j#E&V0EUmNQf%Zsl=qs{d z0t7J1at4J1yXA(j;gUsfLpwYU-JeTUI;kv4T11qn`b1i}(Tbx9Trt{3Uc`c0LAv7%Zxg&G zWnfKbDUmJ9L4u{nQGcY6-)SU&pa!=(N}P4k=m*F~ILlKZC>#6lCh`Xu@w?+~(j z0okZS1hqe-2qNkMczB2G7FnR{LT7A6fI5RtCU|G8hKD+X6ZQ`Xpkksq2#XbT7h&Ik zI+GJtL!$245+`gZLD**XUlaDjF2Xi-5tc~E3Co%|QQ0z1&`2E-ll~%gL{IutBXvYm z`m^YoBpRTsq%ODhu$SR>uqVO$TCC5kG4h&yE_PC3F}v^&}xg1wCNUU#{0 zgv|a59$MSZo9fGRux8>Owv1TE&6)(;tRO~lv*m>K1@yE@@&N;DkMBB~kA4i|`*PkT z#jwggHuvE{3rJa5SHqYw3Qf!bsB>dcSX<7`H_Jrzq~Wuvva{89fC}$b>o+f_7&f8M z5(dHqpX*PJw7(G>vSH;o?)o=7_p0!|io5)X9j&t3k|cd@mwpWVr;6pgjwSi!w`G#W zS0-#1Ve_u$=;JfwmAh2$$7u5i>H{D$jav0+fY<1|b)&Z{mD)FU5Iw|p|r9MW0eb?ZMixxVqb*9d`%)z#Um%M$s8DuN$pki6)-8M(Jm$b`Ky5DC9(R(|k?aqQd4)(EwZG&igmZk|TKVShi5|o8O?vq(=BfGyF zOF7tI7D>tmEPQM(Zo7imTRbuekb5JzrXE&(XR(NxvMdG z!`2zMyRgxQb-phRoCEePj75KBl%K^eVa7M$=uF?2;47n?_)3vqjNp*D2}sf(yc{** zCDiE;v8{2hJ~tnl)Q_|ylD4TY+G<`RcB$#u0WZa-4aWb3j1A|~7!jxqDlNL~)2d^o z`2e~as0qA!wK%ufqE{N~Sr~oH_!<{Rd|!&5kza(8NFSC7BZjP4c-Lv>fz8*hPN+aU z-VM(Hc!gnKP+?>aIqBRYDf$a^AW4h`Sp}7d+j|&ScqYNS#Mj%!wvsT5Vq@#XA-25) z7k`$FGNxT`8*UV@;75|?J2=Y3fjZHE%b(k6Rgak$Mjt?79HwaWLnL_On}GQ1V`wv5lE*#3?RpH zkPhSKAr3Yz59<#H0iJY0z`%V4tj$U+Qw!a{T(5dL4t`hPIC%SE5UdMh4p-nyVBP28 z>xKnkDvW!LbsfOIJJh)Z)kw=mAA&T*6GUq{@LQVUXrZM;`)AneyVJA%l=6E{#;#0TYSsM!5uq8t%Lau0msr zhpOSDDT@9qXE)CZr(TP`oRTG&XvWP6CQ@QsU`DS<&$h^eJaQHYhL7fy8o7)@E+$ zP0Zi~Kv?G(#poss3w?Nw{uJ&s`0@%ZUYnGctNXVg0+-b0-}IM+c9O(W@i@^Ee=R{JgZ1e_BUoI|YEz5~2Kf@;AhDX+|u|`qz`V8 z8ELuD7Dlf?WM8ZmR}s2K+F4p+%0qE>s!@|Dab}viX1XNKzhNs#LOE#zlu$>}R4&%* zVn40ZB(jcVq4`Du8ksaVh~01E{5*O6T7qRBcC{EZB&J`7Ng%`^`$jdMCDFpIq6|K6 z;Kc%9B;+IQ=H@ps=XzL?wBLgIlIMTj|5gEPOXfG>h?L(pP;nPPACIXV&is)13HS!n zt3#jsy5pwF>qX9D)+(=buBQR3kIxlZv1L1I{)y+tL_qMm<;oYiu-!ar1}RtRRynW% zC_ALb);py6E8KdS0!26OpGb6#BQFfayhG}MeOP6V+iQAKpU8@Orz}xoE&2!~oPZ&K zep%V@4A~(2(lU+a2RZQHLquSD_+_|4};@-g^P`Uy(r8Z@I{J0<&&eExk1+TU>%j99|Q zd=H8x(Rl3hV3ETGebHyE#mW9b*F79W-b3Ir$`0#XN5NNmUtB?!S8gT4Z3%mbn0W>V zT#B?6iY)XE7E~nmaRBHj{c6D`zV6LP;^y=0jq>%%T&Y9VasSGLJ%Ew};Mm`QG49J! zjR#UB>UUPvj_pX;liX27YZ^|8f@Rt%N`3^^l8O64Gk59hL~)`PKO$ z7Q2SMmy(Kk+@ss`l(KR#0XL_ij-T5rmDDD+W!Ou&S;(b7leYw57iCJJc3AvxQp0C* z%NG@2R$h0sqda3rd9e60k7Q!Eqg=ZahMum{7XSNDhO~OTjdZ%W24?xQ{2Tb#V- zNUp8#&8_Rw-lYu|X{x37o%#mq7ni|rdJ^$9=lavidfF9P-6MJf>l0hly96zZ(|;Jq z-%C(`F~KA1e{U!1$7*jD)St2hcSni*uqKo&;*T=y`N7P~lxsiW zYG1F^pXFOL5c~`X{{HtC!ToO$&G#o0yvN8aB(ZATc^RCwuM2|T0>7D)M`P>4^v>6- zvGvFCUz@|2iPglpzyWO7NP;%gjz1P1;ld76+XA_Y%TH5t5GBN^CFij{X9wNv3+#x@ zTO@E`!5-2=J^Lo79a)err1cKEpbZl;v;xJ<^MR^Q z$aS)ByYvg7GRaV=RiF+q??nxGYJnonP4GLI3BmjUjX!C#v)~x+0x$S0Qn84r#z-v| zutRQRIn5R%Uw{!YGJ$I|kEe2QgrzS54af^u; ztV6%sp)bfH22qKO^;>AfcPr2FIR|_k?1Wj}h0ka3qIHliEpdE~1I~h-=ZUDqgjX^NZVY?}+a#~t< zhZlMVZFH9-50{F3c^Rs;f58<| z_LZ9*akJCy&jCp+BA2UrEog;3kUla8H}OzvtX0ZW5O&kW6`bX>uRQFKhnIntuz*Ie2Mi^28Og78W-$uvB@lfiVxSvz(^x8z?K^$ zB=k9dw4yIwcR*LF-cjgkPm^(mu&)q1cY zEadM&9E!b9ioyOC8!EA_l!WU3sz9#5#ng*gX%<#k;N;V8>2oahF+QuB%r!WUa+F5> z?`!klN|`rH_0rOgx^v=kw|DaEq-R_LAjMrku=Z-fs@aNxvE!!z)(S$IzXYuAd9ebc zyd|P^C$BYiej8;TOqpX_p=R7N?>8t#io|4Dnq*&jf$@EfUNH!(v<%!Vgi%F4^_{+v z#ysq79Qq?!ZtoMBzQGVhwGU!Y;HG;Wb!kFg(g{2SrrCTA7wix>>7*FNgBF0K#6IwU zg4Zjc*147-48SsF15F21;@4E7E8l15i300A1yV`l3jfAK#7n*#xZZ^uVSf4(K0$mA zXKfDBFeCpRe)H6iDSmKBB)3xXRU(=E<~}6HAA~ud9_%}}F*9oewmm@dl=&t!`&d9* zXO5@Lmk_oNdyvBx&DuaSE9JcQixko*C35~Mk(1V|$vIE8Q_i+T&PtIJ^V4TZ@OB{= z7JZ3a*Cuj(nUw2Io@;9&*LRpoXHu{OvV)FP|A%wX zhLh3$O8q&?=YghJ_MC*yvG`sG`xU0M1BndZi45ORhD!OJ;_1lHA)vG+GMxv-DV;>V zZ;{U_9lc;S4$E0{@~^OERl?`8pv%l~%I*^=*2#-~C5rV$!jnMIBYVD%BY0MkHdE>W zYJr8|0U&q~KnF~4u&Y!poFi^O+vUJvvcf5M=r270vO3t$j=}qo@OHpENqE17cdGD0 z%k|PU;XMm4^+xo+F;tTm=){jLl_{|)k#y`=wMZ%!Kp74&a4y))91C?${N)uf?Q;Gd zH%4ALE1P`-UA;akH?R#F%{i6)MJd`(kpUE)7SOE=)fk=ODjSzEYk;alN`%r~td}Zp zcge4h%PG;qB?=pv8>Q?0W(D3vg5=9}>2yZ0T`^OM>CL>g}E^^YvqQ_ zq&H*|OKs=J%Q%=e>V)+$sAl|lR(UGy(y05FAY&8J5;oBpMHoo&bE^1$g8&Va*9Q^V9l&9L15ARBMRQ!S78vK-{Q(u{TBtN=zl1~(_KkRi z0b*!4^)bJKK){c|9uw1(y)YELc>}j5q1e4vY*R|~iVg3?sTbn0O{u<=CfGGjToDxS zc69Ik_(W;B)c?&k45p;>S(=~idiuo8&9vn|Up`SfE^Lg-fDHh4fbR|fZDePdrtq|t z2=u&9Nmo_+kbCvF%`5cP% z!edoKU`4YRw_Y@aGp^^sHgIjjbQ-rf&`)7S9t_7+g$X4j-njxZ33)>8P1x_$KzhY5 z3PO7-u9KcQNyD1oiZlmY4$?;WjYlFIyc0;GaBoGS<>p&%uI19o30W($$c>w93KixQ zt}jZ|Km9`WKb2Jf%h~^L>xVSrGvdVd(F7|=lPbm+?|;3K46$3v&*6W}7HOoROn=%& zx&djc{juK2EmRxnM)W+nj6d?Rz`B@+rw3VM5c!CM`TjEbJux2^PGC$hOrH(Q0n7aJ zWvTJ2QHlM@xG{X1<(I+d48cU}n=U3<-_-y63HAsc8|*p3KKWy|jeUG-w<3+pK7VTM zC8pN+RJrRa5XiVwgA<=B?}gtyed)i_N8te%OoE=}LM!r}i#CujDu1-&T6$K*yUG1% zXWt4;O?S&HXJ&`L!ld}AiKR$PACZka=e4tLtUp}`y2x4$PMIL-9-WU#J$n%wgE{^3 zgY#%w%j{DyA{Ro423s+5;axw7RIZ0G`n@>>Sko0UPZO?Xqjsa8N>Ml>qnRuE)5L^I z)!5vR`dhDcr$W5~2q-`r5Y5?aS7UVEK`$d_$;Ng%PLWpvW=vmahH>k$~kX0;Jo2 z&nk$XHA!IU4Z)gkY4v3x=mspO)P-Xgtp5_Q-sG?{f6qn`tRD+l**6r7$)#6DjCtwl z?bldj%t#{Rw>Za(H@rKJ_W>>@_A!7oRJSh&j_9kcv%5Nna5O5(Un$@GXW7?6vuR!F=)2OORtjs=Vz(5k$Q0lX>mp_NkUn*=(HUyln2cFJvi4#sOT}JHm0usj_hM{BZnQ7S zuV%de2Y}+n3+==lrAKHh20ikry{R*^A-ICOaF*`c^O?Kg5KdREtyph7ql&EVr)z?HXLWMADRuh~r-2YF@Y3wYvS z#T48vs?j=S*?0sbC8EUTE|5KdL)Z9R@e?su%v3)rk39%>hQG$NhUxBkIPtCD=Qw#W`(#r5;LRf0Ps!HCu@HVU3X6#!)PL0< zTS0X(Ji8^<6ekc5F%zg?rTvRz%P6c z;Jap@1zo^vXC(mZ0`L(40fBK>hyxx6z?Y8{fcq4TEQ}_D-Ovqe{sqC(%ncCw1;C#2 zS=~3X(4JylzYW&oon-JgzmKRj(-xDzdvP-QU{`zA(Do8TGC{6C;#59Pu9>&TN%gLn zOtVn6ql;D!POLkhLgg4$#r+)xGYaWp1*{nLS9s^(k<_qcs`1R`NmNE(%2`L;I0lBkq1aWuO*P1C#>E`;n8>OKaG|3$!w(SigB~1` z{2NFR2*q>0It=(E1Cn2L0FIHSAAz=x?l|y=mGGvUp;O1DF zBWrnGTn!g!VOy)H+94SN@AkXEFZOzz7$!GHypU&cr)s>s=>gs}PAGXz`8g`gOEnj5 zW5y&jZY>4_D&sfzB7y0Mp$!G&FMqXf<#eNiY-?G^AI#i>)ggcBCyWVu?BEc$RlpFW z_qFhpTZe}oHY@%~WEqO)52n0R6m3u*=J%zJ!L2Y};_-NMC6?;{qlJFZo%W7yQ2jMk zZ5j3yss0EmkL~%Q_tJ-WWNY_G!kwN4^4$dz%|>96qhGVe8*o;|D~n9Lbf*20xS|dk z1$skMe}h8pPW*tYMSs6SGD2Boe=ua)VX}>x>Z4*(-rIizzNGG7G~!%MRWsGjmKGvh zQxy_{Vgx{c9Bj*L_B-|B-@t4h+9)Au^j9Vz8C~${G|rI|>r@LD)p&I$jS%(}_hi!j(D*Q0Xa4fF)s^IOYVgC>Q8%FCqQL2QKzkv9l7tcz)&vBxc_vZ33SX zkAmZPHM*zH{L?p9r`T_zKB>?K-2h|0vA49MW9(0%UxpiwTiVb$_Sv|Tgkx4bkh&F` zs}%nq;uQxoOYm@Nxp+7=MGia)Y=9(T>j<8xaq_Oap7)&Do4+7Xj8fW@U_4oME!37-BoQCJCol~d#7BoCX}*LMK6qj!g+#?QMXG1?63#-M$;xCL>?WSqEW)$_O!M@2?!}9eQ<@WY6>b-KOa9 z?t`$!uGm_XbC4Lkr|UM7ehiOZw>T6D39)!Wq>;bginK^0RY8ANnfOlkad}N67i@+- zBClCYfEGO;Tnwjt(dr;QljT^{5Ts|b;LxL6s&_G;+4PM$2nFqn9YM!psXXXgoDv+n zI2B0y?M+hjQZ#oonp4*-a648QLO#g)`9W;~-Wli5&vLWe`YkJfR?;aR=CjZH@Ts~T zPJF5!gtH#A+D>zE9knA_ztPQJf|QB0{k~Pat_{h@2pZ#0#rO-X_XfzmTf`JB5v@OwzdxGVltg2ILlDzA&#XI$lGA6fU# zjURu_(XYZ>($^fMpZ7=IeUh(%=>T03UN{5s7Q@pFrn-4KU#y+dX$-SR76yR_{Y8f1VhNmub>!eLGHfa~L9OUM9Aro71xKUQs`s6@@2-Tw;Xu?K0&MaxqVHwc=9Ab#H+z4(W-gU+U z3z&=Xpu{t+SesW2BGpCR+!C8F7x7%royn4x4#RS9zj)qC6)pR?$8W z&em>8o^J?V1{JNaFh$kW+oEWyj~^IQpPJW+3U@Tcq90j3F2Ls6e7KNm_1(AF?~0*^ zdH5Jiof?VVMup0sZ$yH*6>+S>P3vMJp7}Npk4}_%gNMfweHpSO zI>|shRJXH0WdmC>oFhT{w9P>HSMh`V|YzD1CNQqKTw6zonT7eaO>vMJ*r%Z&(M5M_9z)! zQ!uV0saS91yJCO!ucMl|YSCUtwW-GX2vrBzkZdroIAi{8O9~zj{0?8vm~lOwD~XJJ z^#A2F7G>$+o`1m5i__&l5JL<@d+`rG#iWRV?!OKpp8sj2iuZm{W?Q_>WUCA`@ZhP` zWGm1BNo6saS7T&Z@noI(&Nz~49)V^M<9mTAv`X#nsIk0Eem}IVV;6$xuHMxt!Ux; z|E46Y7ks_3CF*RSBPc!kuSPeNFAU>57+(kILG)61kE|GU>ejH z(z1wu1%o_F*+QDa=E1y%chvPSi~P}F;#vcZ1DE~+KZ6*GGl-!v;7&NjALGEbu+C$= z-a<@=Yd+#oA{TW~`v96BOJu>5i3~~S5_owvh#Y7(J*r{l=QvpfDZl*897@zS6aqmT z$j24Q(aZ6<5EA`npM!iJSV~LJP7D2UD^cRw2n_E0lj9|Qneh_MpJ4px8%CpQ^W!t{ zM;4Nw{@{(DAh{yL3Psege9O(XT-xv<>#!_x+dsf$8Rr>T8@9L5?0HBUA$ErOv0%gIiNMe{Xnb=NkXG++Dz=z=^{b=7;N)_l=$IQ zM57)e>ZmyB6-P+%V@!U21eWhxH{>?4ij5x`HV|MjKE{m+z@*aC%&IXT z1^ck=bpJ&P!;GAr5&Wdz4l=hmYeLzuFk;`xYd&?f|qa5P=1|NA+B!r3Mo<1_~RT&X$0hND69niEPr?seE~ z$UVbZ^L5>HaC3bN-s4MA3J&6HNU~CYh|-mCJG_U<3o%qS8#5J7iZ29-F9e1Z~cmP3}ukel5Xt7Ho3XY%YEfK*$%S>YP$rGLT2R0f|1~ ztl3TF*HLjt!5(ML9xBd#+c>t;ekFVwIGm2-uub7Nmx03$bYxbg;mCs3unAmX`e~xg zXskn`C}=)SXHepg35PTA9R{4FnQF{)NDjP12TcBbLE@j;K)KPl0!@c^ zxn4Ov5Hjj=z_jAq5cH-1o-c-WxDK0AjH${(^c09j3|1Cw@3DM102o8B9WCadEZvvcfCz;f!rLFQas;D=J_%;#$0go?4JQ-fz ztDM5c;LmfZtdLyd7mFdfQK5oOgvj(5gYHJ}wdvU}FtQM{yI{h(->_eWTQsyUMEc_S zcD6Y>NOwMOJdh(L7I1Y0B8F>4+WaP)FI{)8Um^SY>Q!$Q>?z$d|0vEfaKnJL#HyO2 zU%1QW2W9OJ(qbV}Ure_QahsY}u|Hw^_H^o1>-U_YBzfhFOOOT)A>C_QybOM*A1S4@ zaXA9=vk?M9=g4*t1nsR) zE7I5wuwRXK=q1(_etEGULqyb-3x!|Q`=42c{BMLNmGMB$cf_vnI zOh_L+I=BnB2tbnvr^(0!O@?=)NsFLKaf|O3izanoLyYg9^w=AxNAcb+e8{pZ#O@mn z2RO{Z8yhjX;Z3Y!^t({~9ur3Gyk7dkAx-oy+>Ao6-zp1cI zUH$PZ)co|l(t9|xb{U9bbtRY$|3F+&M|mgVeyR_P5h-yw*| zarXY4q^E=7@x@wuY;)Pfx8{vX2*peEiR({pmg)P35QPUJ3b}0Y-2|~T^9HgnLgCg$ zBO#WqsoBiMl8GlL*nov3OFYJt_IU@34p3owmO`vw(Nq2+H)&0IG(L%d&r@L%D02qo zr~eCz4nmBExJdOsHN zOFLuKZwZ7m;#S z+|!t%=TQ~9@H zHi`BvQlubGM8bBm5ycBB#|a3lp2n)73Gep7-3!xW0`o5;6}(YDqO3XKD%_UY%q$+VpYraC3T>!-b{iIE9PbR z5G%gz6LB!->e7#EVX)q&6zs!#%DLPH-IbB~A8b$A#MQEa(*WGF*rya=)Rt%9BWeX- z13Vj@i7!YMe9Wp=)AQm+_MfpUTM?eT911LY1?YZk!>WS%rL1bbcBYTqC}uCbL*$x< zF&tFA<0wO`)=cX_^f*0b;e>AFGlaDHt8KJ#TTMyrH$XsQ#DbKqc*qmEmf&dB^D^_i z4*NvizgnO8dci@qA2T-3u}e+Gml`>1Y|KYd7B){oH7IRn6JHn6uTnI9aJH7;#+ay& zz)dN8F2 zbWv0u*Nt(Ho7b?@A^BehhD6C{MnOiR3g%fI9ZPMj9jP)rY{Q!+VJ>wpJJojTBYYos zWT*7qDcsNVFNZ8zk*EMK|Dm?S=8dSwBSBGvwA9H^*i8ydi?86lLj=X=W&}lJ(F(j~QS8wlFNek{vHTVDEh&_mp*kIEWS5EF z7=>$d7~@CH*PwHvw=OuGj~vo>&_$Nb2ifR=7Pv+q71-m(p+0@uf?lY5HLNy_L4WQ^ zI1mFD%9cCXKOsqi(E&;QhZhr(ipyYKl~eEGOIGH!sGk&lpPQ|4t&DYikk`S)9i8~P)!d2S_oojwh7 zN`$}S;jSxK2YGmF;+S9u!t~r(FZ8Q}m0_k`X7lxdDHh0yh0?W%SdOg_w!!GEe7=DL zJ=LTsFQJdMzCRCpTk)dlp9psy53H%U(1jPhOGr`cbm(}#1Y)%q?_}{_r%Q$0WAWh# zW6;g!I~zzLz7=07{eHCnONi9b5UKQi_fzJXqeT9>8RnSP@I)#~Pz||-mYZ+6xt5z_ zxmlLWXKvNf!jWpN+ZWug5qzzyK@r-4IQVXBND z!mEZdU1b5H$RGIOTR?~dpjGW#eaDu;DC!^X=CpVfUh0r%W-cNqT~BB?R2XA zGFOGtqS2|}1rrWB=y$U9pR7k|0f!nV-uB%qA~bP>J%1y18~;Lgoo+}>3*`CHZrU_T6|KfgsMNEY36ofIow z?Z>?r`RV%*)q59?aM&VB9bpW3k~MtXjKaD>^kvU{9O41$a|E^^phg-#ZiP#K`XZ_{ z7G~VlPN&Jn>^_8r#YWHXr<|}&DnWU-v3h?9L3-({I*urHmze=X4OLMQDMx>itRbB=vNxPl-QoHh)bdD z<7O%5>t{hBJ|?vHXk^&rz|Y`B_-o~WV~gI;S=*}8%;qTj!B{zzn=%w}K8P!Cwdladf6T52q3Gv4f2$ALAe}vne7yxKDbs|Gc9`8D zvKAP_L!z?tgiwb8xaD!0dZHmH`a_XYic{1O`!LUXVVhml;JDJrlFgVFuqrm&>hmm- zuvOHG8o$qOO^w($tTR30%d*^a>Bw-E2E1}BRm9(Dk>#Wrf_Idzw3Z)Y!W(<@X*96a z#Cxkggh8#~p{6B^AaCyv$l*=NR!+U>_m?HaowBr7=>9d6WM|~<%zi*n{B`Vt4(g^} zhYSPqRZr=01xkC44^Wbx4&hd%0>E zqD#hEZta_47kL_D8rM8LW4F9?p#XF2cYUob&xva*F^Zov)4PEvfbo@}D*%wpt(Gpt4Es{_^x z(6>U$a`W>V*Nu`!qh#H;KRV8hYANp5Gx3M+!vXm~o zDA9sr^ztf^uDGJFvYsFCH5N2eDZmpY$Jff(_x^%x>|Z=#R4`>GgxK=O@APYW@!+!H_sH)KWSjJ)?FK12rXX9bTE@5t_( z&1o|jb8fz95?|4P^AOuTXCe}0#jAKe&E)CB@ov%QCMk)tp4=?uG@dNv5Q-)Qb@9MT z>7(JQEi9Q&@DAYkf%#!`_#m6@t+k&9eDAR_3fhTYp}eUI&U;oS7>Ft3wgf7T!l9sH zhO~7+zA558)#f^@h|`MxC*!U?+AHR)=zGEUc$=_tW^k}G>1Z?JIY=~-(sQ>!`_rR= zUXCA;LyU$ViGRr1uUJ|>DuSX+VzrNeq%MTvM#WmB3QA)N4WhCnUTM}r5f_HddsU91 zOU<_aPEzV`xw4Lh-P~tY?@Y^T)qO`sO8hhpvS1zwW)T_>0BE>zoe;*X zny)u1)y!Hp*?C&%DGH=YF~^`>J=mTP{O}F&U;IY+;a2$Jr1HZpx5{>sVNaJYZ?1pCyj8c8reo;uGH>HoAluOzL|X1l405N~a+`C6*lK%Uf#D6w&!Fy5S!?86T;A--~Zl$XI;o=ds`_QlNd zUY~SI)zh*J%X7ol^B#-)JU7I2{n}7#rD~G2S&7S3nRuNv1l12mxo5|f0^;A?ql-1X zg7Ph-hD;?c^YZJ;x%_q#CQ{40L1ipof8`y;d)X(%e=DZ;J^U@<&6;nJqw)JQXqeJ` zA15vhnbeS&Cbx0ac3rBK(TfOYk*tQzWsw}QpGETXEM$<29}pD(#oGfF-AqMhBiFD| zHZOxWKzErE-t4D@IiM0Hd{auePfBp7++dP@DtB&(uOV@{d9#tzvQe`4Ezvx6yD)+% zdHL7cC@j7F3p>9Xi!)xQb?7U%8r*u*DE-x4q^cEp_i;1zfx~(d(kh*SVHRgep|T5Y z_%Tdzy_}>fVU_omp|Z&3NXNrKLTq=X!yX#{l1ytc!uxokm_DezwlzogD6$~F1Nt;h zf<2of>D?*knm!$dMERvo)2G);pZ@GET3vMm25Txg!+Y{)lDg{Vd%^xTUad`Hc_|#* z=jSmA!`=M+WqQ=UiPNO!+CsW^ytLJfUZM%Z0W6+3k4G0rrYBhXEMIK7$@E3Igt^p( zg%wq6gfWGJeNRf}kh{{X?9WNj6nmbB4A%lXZY-B9f@1zt4C$(MUK*OR&RZVan_KQihL8uL#$H56A^TYT?{$&6X{>ia+_|mN zx%pnq$NWz0zjFl#UDy>pGLx<4|4NTKHz5YCXtx7nrH|#2EuA!;CFe{D2wnc;T{OtO z<|oLEUs`Lr{D%a^|FToUr#xh$>m>Rm6J0OSg(mt=6J06MhTAPzB+&u+F0NDnCpu+_kq!umn_g@T{$>t zh|l|2$4%eBLKYiuW9bj5Zlh9ocgjrJB)Hd{{*XTU57UKTASnLio6<-16vxkU`BD9; zl)Zr3p$NNp5@Z8YSFm7_@ED+q2KFu@v#~G0`|3{FJo`X#3^ogqF*Xi_iuh{F8h z!J%K8VV)#SSW3?@%&TRXU*E1s;+p8u68*4={d{miIOE$vPb2ML#2aKvXf7$xLf`^&z908>AXr2S`cV z?~rmJ$QmzcJ)3j^Y^`bK;?U|t%=XF3D@CfHjj2`az3l?a z;^+41`aYDm_Ig$3q0MMqYle7y<61MsV>sil3|Ey3L5)pFDt@;p!^tM`bOMISG(RI% zIlKpiF=V}PL^L|GOmbhaVd_E!HQJlDvfgAeJYGvVyVCg-GYG$(r)57H)xv5Q zW~iZ{w{POMpK!FG?dTzCk6O<+$g<_@lD(E=6jDaB!P4<6dFmPBtS2VZG3?{gS~}if zRWYh6 zwcfL_S7=|*W<#$y(iDA_qvrg-O*14ncv*J)-tpRqYKAka;e@KmJ*j4ZQ}B7ZDm6%z zL{sBqPgTWQei#%H;8a!R7^*65qN-ARu8|?i6&7`!K|d?1nmaxY*at*^1zkQK**FIs zmS#WV76e1+uvp7~O4bNZPVm4^hEC3UQ39zw*V`SEL|rR**F8fYXEWFPveC)eoYDa) zTF-J#;tIPx@#Y|CH)lfoLJC^SI~#oKQ}7jSww6DZf{#Z=E3D~9%sNwiJmNbzcLn1r z2rimeX!XxOG@yDldKGdU5j?-kP5S|{WQBdC_c=;zIAL^DhOs`njaigoM^A$BMoXn5 zaec!EQBvtR;b9R9=2!g)EtQp;XtyY;G`+2QDjMRUrxU(4jcKK&ifaE(WzN%*%l#G_ zD=Q72U7%V>i_lr&f*cfKT3QR~NTwE2?ND8i6JOLH_=mH~J6ae^qmQKW4w>Xe-jSLC zoj-)6HlEB`Ha_Go7-v*qbZ)SY$M0Mzk$cdB*=V$2_5^%bR0xg}HJGJC2(}Z~RaET> zySY!GIgMW7IDgRY$`{JxgN<^1VcXU)uggZNDK)rA|g~=XHmLA@q)L#?~&o{#1;teGm z9^NfiVDwp7xY3_+t39zB(50gAByGWW&$E@jd9PY4h036D&52@FKGa26^bbAyc6Nn3 zjZEp>&6aKwS(D$>Ld+y=kxAN15|uk&j}JoZg5NmST5#~Izw`wxuKgrx5+ z%2l-fYvz}s>e+uMRDGqaUuaLT2J^1h4RioSOG>Bo)}|Pog_&+?vi>zud$Xd$U>zrH zl9y^su~R8FRTRo{6m^J-DL@FYm*+~!lax1_QlJEyF5!^O2bU#1XK*aJ!E~pGf2EE- z3N4{yNh8Wys8bo7;=T@-($5%7D>|Hd2Iy6~IkQ-|ei-9ockN#zo{|c^sK$rT(JF{c zS}lx$^~hsKMSi6&`_SQ;*1ipk|y0!4gD-IsyWhwNfBrC? zNnV=TtGzUEwlWJ7m$CEvKj^1>UBkEuQ(@#f@uqFivkg=&<0?YN2hlu`--m$+^XgdO z;++NIdjk+xd`0&k{s;3w96`KgUF0y-lO`%Fx>U#)nU4y~yH`g>5_bIEA|J$k$!wHL_25sZOvRVKhPU z8C09nXP_=;h;xg)qE(ldRafNQi=~2)9Yb}~-ki9TFmfZro|(@(RE0#qA)IbJeqP9$ z+Qx$>@GqWkJ?~!y&sqO{HDu<@EQ)Sh_9@v$g>dw7pQA8PvZ3z%GI#W_K*^Rm>~v3i zC}=-XPvHR{8c@@ghIp;YenQBteMf%K#-z2F&ugq3omF>!Yx?pokI{YE_yjIg<0#&3 ztQ(iL>{0tiBDZj6jSsv{{6u zEVm8FuXKEY<=j_<_{O($2IW~YG;HwT{aIt*JhM4l1SXf;o#pnCa{DCuNZbp1xUC|( zr!}-us;L=*X!*Pci}WreW6!p8cHk~^SI#>@Ta_{$A}48-z#q01{m(xcw0%n{5~0$hcg!cBuhF z^ggh3$ap%YO7Wz7qn9>&ON;Ae;d@*~DYOU`r4Hy>NUFbWGB16@2c7{iF`3a*! z_NYkQNf8_;#u_!(xv_nPzE=1hHoyVjQH?w=)-#HmD&|IqsL)_+>{^yc8PF`Wg&Z}S zVUM6!F7SE<%kB@i(GP;x9`5qa8*5B7N|mDSbFSSI``C|qvHjHwuBqg8#L*rO*glXp zzasjP8ooP>$cx7Ntw-b~Y`M)+fV%S-UCm^zlJXMLq4aSea%dYsupx|{Ntub1P@)vZv+Kq=8&~~l(v-{L!7@a|B~^@ zd&t)E$#@Ka|9q0ga!oU)sLokmGxJXb6)Q~n-?ccQ`@}vNF4=57x`9$KfQ1c220YIj zaBfNRW*N2zxvafU-V=YTl~lZsCi;i=v6nE=!{fyr)}v8!Gh3r#MhmFUwH`T7%G+$R zp|i>XiXc|}Z~j9QE}ucPAWVU3h8cb8b8M)A9XUzl6414X@ZyCM&NR>ha^W9N2X;aY*Pykz5dr?E_4uvOQ=ul^S+ z&iBA!R-BOp#dkN$Ay_ikdgKlmmK4YbVc!gK>xw_q1v@FGZOWZc9;_lITFWO0obHsD zDGny%z1J!AK~w56g5r-;D$x>7^eYm5lOU;EunTwm0TX@LME_Kx|J6hvk?31Y^jjvn zUZQ_tq7xGRmnJ&T)P0Xce{7;3l;}be-HV&Lr%LpG6a9fiA9z(k+iar0Akha*^xG1> zjc6l(471*2`htcx9LoaXYO7FNW!}|%OFnnV()D$5%|u=_mJ*nPrK7yxLho1EqHwGD z5dV3h{&5;Br{rOO#4XK>xZ(V`TqjTDuB9S)b&pM`-J)$+#?MRN*9lPYecbUY1;|YO zK3$*g5D9B(*xtgDBBOC+6$Gjdt zA5h>8nT3aIhB%?-0M@`k*Ib@;uyb^s2EtO6p?Y*CwLab!HoAMFc4_NIBy6u1-o7=o zN2_$rzKeG%lxNyw7^bITb~6~JJ!ytXrqw*bD>;mo2jwHKnpg6~l}F;YagiJ*w2&%5 zS!JiyiYThkuI?#{QJogEraR@BXQho~!03}$Q8`J`=w7PZ ztL3yY?%WCCv-Rrrh>R>X&D!%hA?F4uVdZn+#JA!C|PJHNQx!v0y>aZm33ws6?J}-{GBS@Sls(j9DG^x0@m^!^oy{PGIRt!7|GyT%PO4Hqf&*P5& z2Zv3HfM@VW*bivv>(LS0M#*}zSUcQcb;Cx95FSWN_ZX+vX=4R5xF@cYCv{((U!6SO zi6S@02hAQ#;rJ`uX?YdyEj;VN;PTkS!T9Y^JbFA|81EHp*%M_Y?1=kpAq%uJc5)7K z1ihbfciMPl4H917(DDrFun={Y1&sa>y`Z! zLEiX3Qn*Z&>8Vpwem$CSlL!Az9!(JFxSDQ4<@lp@ykd3ys&5TG71N^P3xOUOp9`v#9gGaZ|RbldCd`QZd$1wU!w|LSjg z9Tj$?dD2uM&(k8GeFi570?ks4y{?@f4hx>+$Eg@)yBo#tR1}77 zx63%k;uI4)PQ_KW+h)QT1h)rgYxJM^f*edH1q=pE!Aya%KK_raPSNJIB*`kbf*ZZv zqO@}mQ=M_%G;m(r&=*eiho}Sv?G0FPFSp;4$BOJz+Iku+Z4ROqa2>%24vx*JcneeY)b9VRv|IdZL0|D%xjsHy`Y6RnvOf7ca%wB|b zv+%I<4zTlfe>D$Jnv8vnVo=y!CzM4S63+pAXqW_`2PkRv4(b~~@9{@s!c$)PXqOhX zhMMIkgFjjYfAm}UqqXoyFC&kGK1ucQJ&3S`M~O;uH@bi@;Tz6@bGMDpjV>Ap{H?7% z;j7MZG~Q#a^4KAe3`@W6N`W$?ihtHMt@bb2ol5hwYA&Q{(ga|TfcUL5#2tMIw?|B* zw=#%HN?!r~u%WLWNF(-^3Rw`^!ZvF52e}LLsuFcqZCl3cg!0ph%OT)wGHz#sQOiaH zgP3v&@T=Hxu&?I+zCCQx?W=0@VHu>%)QS3c)(fUwvjrynr6s@t!|-i_;(v{z$Y6QP zp!$W7V!z_9-fSv2{P&=EAygW_n`WLRUI>B4uRnXdOf-%E*;(T!U<#AUqeQCIPuF{8 z39X+sCVe&M!A@hg?jp{^vh6mu^{6kvT^~z{2$f#naod1e_^Xkjh1RP@L-l%Lo3F!q zb;i)V;QY-$xJBL{I#w8zfKj3O?>zn(oBh}cUQXH)a`VsQrQ+9Cg$B~i-zEuS#|wkS zn?<@;+=1;6d&XRoTa(V975%`hulb^ zKREv_Q#VC9vvYee-=Za-C=B|xPjidT3&f7+VC!UJOUTzbKPhn-qY0|96_fF3AA3u-u?%CJprxM+qB z&9E)lG=sE~BfI#xK;T>NrOwBeiKMm4I}$nU?@5@A;GrcaP%PG3ass{%47Q{S9x&Ll zNekW-Y>Kqxh@lEPrVyD5Xk~1Gr1?4F50s~~w;L@TCY@{&t|BS-;m%`^!#yTtRb@Ih zwvHv17eXj8718S_ZAxA%rK#;Kcx|*9RYsH?{@oOky*d-E|PM$gFb=dH~MR&+e9S0iQ2zZqqtg0BBuCR?P8S6c9o zMZ$e<(C!WvZwUFif_5<4X3vhsi#tNa9RauK9D7EzD^R?N*%dv?$z<&snbM_MP9%3N zbLwU0)W)D2v~q%kurJ;g;+-mA$4zb#uL|bOwToIBV>!jgxaK)b{WDs|hKk#;fs`|s zx>`zu#T~I;(nVS-!A%UQ94)Q=IkZIJ$F$u}oxNf9tgUPWp~CL)%YMYO9V?iZLouAg zL@DdR9>KK7{G9Oyhsw+;+m#WJEdjeT0%S^;y-&c@$0lZD&vmF=5F1Oqb+!L-#(Od( zOxMp*j63`nD{~ml7HL1F1g~SekbfPfKFaO&ymd5tWKV@}!?ednUsTpKdRTdKeR<>Y zyxP4?5b#GSMC~S#q3bZ6**-15?9VR0aG-n^gwK{g##%Fdr!U5XI!QP3^=u9S=5O-x zk4Jm%mX5g5wjeNWWa>baJ)MVmr@Fz?Y|Q4&ZPRBmulW?1E!?-AWbfp=5k z7%V|Coo3$X`frWJaXt9HjslXy%;qVmSsGZ?R5rD#?9!&8tPnT3!P~Mm^roh=%bLo3P*=jfX2QPE zR7O!-$v({lLI5L ze3Aa`0jizu3?D|KfOL#NdZR#^6iB6;@1{w2?`oPEXd3Cx7)7$CnNyo)`nZqzdG*}X zG&B1qcgBV4$-(8z#!6Z2!|bM+mCVvx+!@2N)mIuYabHv4Jxw#m`rdXUz$@*a(=`23 z1}WWq#^f@VP5R?oUe~94dO#i`@b8iiPs4xKo|ZNY0AHF3d>|8enw66Q5|5=1z(dyq zUj{sM`elO#haUgJpkcXb5T;a}1%AMn`IJn9Z>CVwNIEx5`*SSt(QR1jqT7L-K8dCK z%$J&0GQJ>7&Y%Gg08eStgH`;^;qM;)D*2nr-%Z|nBK^m#$pAoRQ`v4Af0(4Q9({nOFK*lV+hYmbL9;TOmCvdpN`_>P#DrK%$tiI>=_^{1A#K*hK zP)sh@HXh5X-G`lIjx)k9LWcC8=#hu*bHn!6#`4EP`85{9$D}BJo-seo=BJ0B)HL$w zt)idI_p;qS%&JX)U)_7u{eimos(T+KOlT5()@SPG3Ha&MJ)OFzQ}>hgTHBM)n4f0z z)5Fi1^f84$TF;GI&)w>-6ZexpC5w0;6<$U|cH;QI1Bf}VUt90}3)@4n6iy?`Xha!} zc(k6X_<6?sG@G9ue!NkX{^RVC+k`_gfq3K{Y^h-Veq^{|{YiEz;o{9~Ynq}tS=KB0 z=kh)uPxY-S8j7Y&z}}C+kTQ;_r@0ZIU-{I=*do;JBJS{++(KU=i6dWrX6<@y69?U>kO><6vaDSNQe4HJjL zM`g(dfEgHumLB=nmMO0o5xI{;R^h0+ZL+3pp*C?5EkL zvOkB#mXP>#yvFo%VQr_`oTSwZGS<^G%YQ{g&jI@_9vednI+#9To*)3rH$@KiBU6&$ zhM4q;Fs5$qie=hhv5g;@BHtNPPBSq~0+|@qidgyQf>_wKt1I9Ua&sTyUt!OKzV`!Y ztNrBcaHjNc&+Ly;u3t`9RhLdK_xM^>y3a+QHqcM+Sa=&HLuLanOXDii&C;I2o>E*+ zdedEZI9`NT-lCBAs3Sa^jp5F=+V#LT>MZh;4ErKzL8%qkc8 zAZ?M0y;VEzZ#l)hzZUIY?5VT|5W7`v<~VKbksXn$(@Yv#{aoNk7xP0#f{9&Yi*e{v zE9h@AQH1rtijDE-RdjDH7kLVAbAeR|mf8e;3J?z|5eXM_7<$dMOQq#SS5LaVaM^i* z$7Wod6?m*REAbc72N#pnvu(Pj7EC=>&f)nbX(`-DNkE``V*Yz$=r7x{(Qk39`>!o~IaH)jahv|Ja+F zfZE`A@o{WUN?4#Nl+`PA%Y9KQEruRQnTx4b%M^9(;#irRUq01+*;2TwcwvRw*g+;S z3wIO?Fcr^12WJ#uPWFe{QeQ>Ywz9{HE{kASoCp+P%bJJ{-v7o0fyNkljt!maK7NjY zY}3@o@-M}#Yuimtk>OeQzwvoekl<{P>$0G$NDA@{TIsbWNOw1EkfKAy8_KITNJ@c& zwqKkT$$4NcTBcU?GWOme)AfIRevB7#{v7;ik;mx%ApSfj^YD-3 zPZSp5{~P|ebhmw^xD}MB%K;^F0*%eE3lNQh@e~fb;LmfH)(v2-RA&X<>DV4d%y1?u zFj%0%RCjsSXOP#R0JFB`kD>qr-K+!seKXMGGX{FF{8scM0z6ELcA$TpO0!-xD@t?x zX=Xe~g05r6`jbv?ACw%rB&2iPpOM4cuV$`S1N6Tu?Asa8OKqUln|1|M$y>oP*HbZ# zER`tT-#Y+Y$mX^6iuQPfC9~Z3p6E@#c?M}r^H+oF*PBFABPcvjWBUGUsy&wH=HfOd0`;CCjg^o|{(c`#tY1$#@$6l$| za27{YW-BvdM-od-2r)C*f#u}(?3rh*XJ@G|-HMD7Ut=bk`py>n3u6Do`nX{_&_0yU z+9?%@hp1#^MXKU(3}FhA|g*$u!eSoW4m~{g5wtn8>?YOT#Q6EH${ZJwg2UD z`Ub0Iy+&sC;=qn3pDj&fXr7ltq+to&{0)q+xBpapW{t6WP|4G6W??OMzR@Dh;8(0Q za5C6y+zWJ_awLRyUzn%qGz{nno5)76#-hTQ$cI%SYOs7y>kGHWL~scewy4gem4p4- zkGv`keE(PK6Ka#*Uni_V^WSdPEjAK@Au#Z$eGcrh3u|{lXmdrd3uc&HEGBHTx0(*% zaPfc{9#jG)j1C}dA~s!WvNL;paQpw?jJM6HP{t4&(*5%o-9MYX z{Eg~<-|VYp+syV|#maxj$LZ>q&R-xpe@pCFp+RO-@KGFfTAEz2P(4UP{RxgH6v!X-5NAI8v zHZevZyyr_xkh7=ftGm_*7Gpyue2l}DLf-%4=c?o;xvVrr@%cRwVHYgtElSy+h20f? zD15{5I0ncl-gBCAY$&j8)2!vN7XWAG1Mh>cXguCe z&i#@TxAkk-{EVEtq*Yy-(~=EXN}QC+zd`}t_I>|V+Y*KDBJWXvUnd6@a$4xb_SW2g zTa+V22C#Dvq7)Xkb5H!e^g`~$57hUm@y#{9e&ZX(LtCWmHNN8<hw^$mx_;SrZMduVBATB%y*2kc5Id&-3B9E| zKF~fY*ztFiVas!yK@f;x|0o^sb1@s{7VJp}Jc7kY0=m-yf6HqN1Z+zO)bk_=0h`hR zKOL;M7p5wK;hHGeAs)jVD>pFgSnJH2zQdv;LHJ?QH3-6VRSroKkZ0%^*r z+)>gnQ}-#U`yG>0h)4RJzi)pe9y*VqvA%s+ zJV)`Iz>}0p=31RM@Fyj8N|~K=D+RTd5lEeUBoH{xf^Y0Z+=-<@H$MwqfhaRgHopiL zE6`3U-hODRRqf~YKjt$IdEWdnG_hl@)zw~ZZ}7rKOIQzK@0Z&rB#Z(1GC?3y7sK6^ zzzwin0G&9=A6F`O^dGXS#|`Ck9g(MrJb7pum09$2wV-5I+aX*<*Ws-068}5$X%}w~ zX}b1E!ai}u#kF5tg1Cu;bkB~DNtf7;cgOF=wTsUVdQ}Fji_w=M?E;EKza;s=(>vi;sPxI#)=!CU}Aqvl6LWlzsslZ?TilvZKq{quiPxDF3&LqnrU}suJ{N( z0EDL)KAl0;$Hd1t%{xx%A25p5Z{avar<{^5s@}&(5O?wJp@c8qI~0GFj79(3eEN2% z>;5)`%bN~ab)zl(r%sW4pCmuUJGYB>4V`OMy)oD7lS$bh3)-8Gylqm06%@Hg3nqQY zsya!)PU)X+!L8gmuK=>u_Zn_Sc=7J@_#DjRvtK?squX&Mn81A@>9M|6KK(H}mQjV( zcjcF~oNCHh+#_XZ_D`jZ4}>cGUdo8m&!3Vzeng5mKx4q*xc2!jJmUmDdOu{vg@pFU zKgIp%{>~xD`_?e)n3mTvEkE_9<=m;( z!r;i0L3gx@VUhOV?9RT38;^H2Rk$@*bN5YO14eK`csAirS5hdGdAeJ3?n%V)74Fgt z_}x_D-Yfp*3U@*FNhvjdWVt&!8$>J`gX3HrGNtFdgXaPb#r&&;j+0OZx$=Di(&^z+ z)%;>Q8<7_gHjCOdH<_3Tm0K7dX2X0Y;5`sXq4{&5*9++~YvC1a9p*4C7mgb#5KR>C zCu9Nv7mmA5g03LhoDb9m7z=O22Le?JDl$>$@1<1mvzo~wO%MAcXIv{lo3T(POxj`;e3= zSwN{d@AIxhT06OzTFYXjt{q7M*rJv)u>*S*;s=>F)-6YV+#XXX?s)g)tvjTvEx+n=xQh9uWxBkYfO7{0Om`#XHYw<@DgS^qahlGctR6f}AWA6Z-%BydR4 zH{vEm^-fa12mi9nKSI9wBf+=@LXYTXXmkt?eOb{6`Ht2oT_%LobZwW9tRyTBkgpFU z&qv~teH5G}E+Os-AsssolP)2Mykm#Bdid;+hCwvD7*AQrWm!%fk|cYflk~_!7>7z$ z7x`P%tt6Z*{oN#~d7nZPWbDq}Ec))&;&$cMWs-NvuCZFCUY9W730W2mx880x0o0jE zq)8_fy++!j+&YAI;b+tA2SRB|f@P!zrb8*AQ0V?EXDSH&1=Ho1x`i)~16=>`DJEvh zHD1h4iIFbslch2BQSuBQDJ`2P{CxH0MUo+8eISf|^_3%xkIj}6Xu4dM2t%1==_Q%j zu|k+eE=JI9?bWh z76HuagJ_G8VDTBgK)M`LJZC6mtX6#d*}D|H^t3BhzNddlGfU5c;CO zV4j4-`-=plzu=qVn?|EYl5xq~dFmdK(o##E|EvD{{p*Lqk%L`+xc{PWKp~(o3-d?7 zPPGN^e`g5Xz6AI$aYz3hbON263sA<9prUI@!<2x%BYp%LKm6ujLSQWDPF`s?56V{N z-$0B+Kr&$Q1TBQY6aG%c7BG$!H&hCR3l~mbiXS82E1;KiJ|vs4=t7OnUf@klOaCmC zc;VL%QdB3!vKZVW)Caa)b__y=9)LrsdjLom>>}WG<_xH!eDikz<~x#;p;-V>bs>6! zjXlZhQ*8VyLWr)@Tl^+zb%i7Y0qR1}5JLN_rT8xDUO0P*?rdsCK=S4s5-?|9q9IGK zl@NxvlErJ`Y>8i3LzFdVhoq{xL3!b6@}1Mdr&6Rn@ZHvYnV>8#`1S)X(|qAlmhx%v z&n(-denavLFF??Y>oiD+jE;-&1HzyaizrpH=^;>y z+0H-<|DC~Nv(Hu*`#s{$V6mk?2D8{qivbpU<^YTR4M{1xT5JAkrq!~gOcsyDo(Ur@ zGJ<6?`#!^C=L`8#o}2aZGd#An><-DJJmn0T`kpf*6uO~&H4M*eXn``;OxI;XP>cu2 zW}lz(NDLlfrt^QLqxvT@)B7kbE~~B}mEckw#w>+TN**iUAm;XFLLq2z!8U${6*SB= zL|mlN%f`@(ZefyP!cwl8X%}NNzfHO%Usf?#ZE+IlaoxHun?RiN_VIW7DsWn=t=>ot zRJUvh$=MPKADDLCk#-R~Usj4`<5*snysL$clPow1WaUi-o^KQr^fp)OKBVYB%(#s` zRitXGJMmgB!HG7GNTEaamcS8MYS)l>~|4hs~Wzoa=6X#>91XQEbt5e1vyU-u9p*o~)8@VNbhS zMe?m)Sw6aC#)*Wf>o^V-=^_iqCBl*}sZm%;4qfmGi*2~;0qQM+TSO!9xhfkGAx!t> z4gapFy7*0>MC_Ancdd}hL<|G384@lUdiXKj3Q?p4kreNcb!Z3lAaUO_MC@Q0PuvBz z?06T4EZIARskpBmnBFD6MwX#&;;Nrj>TPw&7Mmr5g5y#JQn~)&d;d*(QP4Wh^Vg6J z=EF{!)qmyd8q;5}(WGGU5yrWXxYS=aoh?|}m)mU8Q2*lhg;P9~$L9>`FN}q(<9!$Z z+$3fNU%dAmKFR`Wj`w|dx05#^9BQ|aG6t}Jcz_&?Qk`td`z~K%@*|E&Z2U&?{6RC%4v_E z`PF=j8yV`4V0Da%6>%fiiTgQK+K!AA_cN41xaH408FEKY6;Uy2wPO%Bi-Z?W^ffbM z4@Z25!tU%bsA#A>_-pRyF*w5{s_-4UMPeehN?#-H=u({Xh!I&a%DI%LCSfv)5Fso@ zjJ$qy4-gf6HaFr!qusTQY=0Fq3A-&K+E_K zMQ0I>W(w>%__Z(};;5{)KN}=lSOofe{5w9sU&10opq-?_8O+v@*+V4+^sR*MpM`Ok zf_#{%drtD)n=57R#w+u5;f!1{V7E$~3p7R3=3WY^Klf4&7k)fsahP&5uIjX2r87-0f`D3mxoZ(}Q zR$ks570f_-MJtwO5j+Q}A>un}pI<{qOTWG&0Y%x6mxYLR;EIK$8XlgRHvcVrhKHvs zzoUtlf>+XS9Ar~NEX`#JP*xstEpmC4oRfiE!s$Rc3ERylwHgSq z#dlD`h0R9(gG>2a81XJ)>yli_EGK*sB0p``0i-I@xTfk3~04lccp5`eU0$4-5My?RteNK z?4T4U%a?8p`iGA&0Ez4{4l>aZAj(cI1JW; zq1kX)?+KAuwjjs2BhIgMQz${X=^&w(no5E=M1phG^xb~a>tP+~XKQ*53VZ1@g09aD zns*=Vo=1yBQiu4Q+(88fUQygbq-JES&aZ@MYmgSMK|*!YLGuL@mqoHA!`qVKRxdUp z}kZ(nQWE5`a4N|zRmlaCoEqB0cenSN)MHe8E^~59HEbbzS z73P?AdO;hD+=WO&RXCfL!qQAZ+&cIa#i{<>P5-P!F4P0RI^CUkp%gIsTKUQmo{DD~ zE4U#GoKS9cV$MJs5vu6XB=KGF8g;@<$(Finw8ObcuS+;YAiImMZ$8LnNFetytUKF1w(NxQ+Qx~&ScEqrn zPz)UJ%HfztF@FC{CdG)K^{|T~z*RI{nAUMVN-q*}n26vP$|0g+B_FyJzIyht8}r_7kYXJI-o-lm1gu2__c7Vi;? zqWt0+Os8xme zgM0w1Z2$X*k0G&Kq4df^%E#VU$||BP!0ki;j7)O|ybQ9rdq+w_m1@oyqah2flMt|8<(e}je&M}D zS#wmfdGC!9@Syl%g8n<%=3qvs8CaAN`jj_+nA;UJ=?^nPtIlAAbi25p87Ev2Lj?4r zM*zk<;wrjCzLT%T4^sdSL=ce+M>AS;wrkoOK=p+~_!vb4k=_ZD^%?$$VusG01`9J% z(y9b=@)!wVr$azmemPm<7lIin=_TR>0))8G^M9J`^8a6q&O)BXp*4#=M&}QSDdBaD zm=ebyWO{0!p(MlcFp!4hVf=Tz=20zrK2rxQll}3i)@M?jl^6Q=|E(|^UPzh30bb|{ ziG$<#8~y#myijgb6DZ|sgKGS-gO%!nc_uLl<(%OV}|3->mg8N}V0>YsNX?a5$ztYy4C=r~7H6yb;vZ_Ui?_r0>RA8+ zArU57@18Ikj;xV`L~Ekw$x?6C@Y{V1fO6+(2`JtDw`X}&PI3LOAqbIE`MxRFnKqF% zLnTkuL{Lvq?F11}i8daM7G*rSB4PCL2hP_}a?P*5f4}I}l?IW6$ZVk1@`uaa*5x2_Nen$>07S1k_quhn}UQcyskP&c$1}ykr5&)B= ztJZ9ZUU)BQtvSL#EWDRgtXkriRSRCCdI!bBV5YY3D2?ff+yYj<>M478(@79QjzRkA zXq3X_$V^pAACQ?(P7d=)A%_nAB8n6l;1=CDS_}5GbnPY;^I8t*gq0EWLsNu-O8s?%n$@}GTD+Y7{&$DOoUIG@ zN&8p{K~B-8>$~`KnqO45Gw7gU%5n(Xo<}=mSC0OyLLpkVDLuw}fP2|Ydf7WekYVtg zWyXm}u9P%0EW8NeWs4(20|7uwXd0R*uwKg|*O?%3j`U)ETa{W6!yyKM&Xds)?JBhX zAR{0Yr5K4kNQjG9;BF#JHCc>Tuu;579`;L~iD2839g@xIOGE4yQdW(we19ltN&zUyH0>)XS?fSweEhu=2=aKjwzFvQkGjkT!V#2Q6%5VBY zjqcZ=UK2%7Zbaiky}&Q9P}Q#A5FzUOcQ+aofeB`hVc{^JOm7&Xx1R=G3{Bc^B zslaxIN`Y2$7z8@Ney)z5=def=^(6P=y~4SZfm-3;`65E*iwv0!%U%KdU0k#;Xw{9u z8Ug14F5F01ZaJd-X8#n%`c3>G26iJK~qu@z2+eck_g{w0Cg& zX(#R2rN;(Ra~m&{o;yQ66P>=l<<;+;|CtH~_9yz7%O8us#ZMEQ5q9ULTPJMp_^@HO z!hG`pC&>MFaKhV^VV|(pV2`P@ z7=s&KrrZs|2^)M{cy*S!f z=~+o%C&9b(8g?_Yvx+--O@UwE0h_z1t^RPbt+rLB7`Jexzuc)gCD_eraq=In`<~rW z+zIznlK(>Ot(+wpyGjuHX^#I_ z2A%2tVAH0+OL8$ju>HdTb`K-Y-GxqF-qLTDbXsmZ;anYkqK)6;gLcxLjv>c?nF%2=kr|0ac#eI33DspjQ-yN`*UGTjFvaX{N+4)xG$Vj(ZlZ>iDkj2 z4t=9?`}dDLbL;v6|obLQPkfCu3NX3@5kL_Hyr<#&1h6 z8h@}4-lK-MQ+@Ct){t5fQw(OBZzy`Kb||y}Lu<`Jdl$`pEaLbAP3Kc$V0#~p6(bPej!1mMSRa@=RP36fAk&+#?ZJGNwW8D@D z{9Djnz{ayYzVzr0ZUFO&iCb_ON4U!05cahtd$8oY>?`FQo0cR4Q0#$n=%2RQ z&cqri;A$zr4#mUnO*zuvETqtr!lqkKHO)KSgxP}LQM?qX^-I52#B1NJvn zY2uG)-v!+Z+uU>;_RksC z(SiEC`vZAf2U?vigR!aiFFXLJ34rd+JhN%=ktLXAD8ICRpCuNpSy%)0J(O@X*c3=g z)M&~t%{$(dYJ(|{HXNUzZBWxCVyuBN!iciL9dCgCj~HX2K5c?mpN@Y){qCXm8?yY> z?>kzW_f~1s50Xurn?KBn_2$;^>dEV9!br2?q*k}N_uFC#&7Cr0uG%2~0zWTtj3c+L zFQ~!>`Qe%D0ajc{A~Bhk;O|Sc_Z$3e;_q>~RNjEN0k@bymouwW`&0AZyvNWe@4sQ; zz1mDL)NsHws{Y){!Dt zDcr3W%5=Gu>=xzO7ZUqaVMtoxG317v*~pxd|&q1kG_A*F}iZ}I9( z=qb09-HXf@8{R-NI$yPqH0%?X?+x>7ib$~&-tTFdSZpbvpa*Fm*7l|NusixG+TfP@ zc%{qh_s7D1=k~SRkLw)TzBlYV{1m2^u1f~C#{<^$?PAZ&DJ=}U!6y1E^h|OqwrI*R zXBO*W+ViZI>t9DRS+_$g!pODk5RdbDLF#RD%T9-nU_2$%+?X``T+iA95bXrhI>1pm860a(_ymTb#+f3jLZt;4C{CNWPUC+<>@j7vEtgk$|v0P`}QD5z&JXOZ4yL5NXT`QuY_F5U%`mhh6Lu)66erY{^ zkeS3|0le#?b7W?|wOn3Fz`ECwPRz?BS!u3Vuu`_of&*bh#Ri`yv{8s$o8PL}o zN$h2QY`UM}-F{SQ$@bm6y~$9H@P<;3ICa!=$_kU4%d6V3;KC4Az{p|3MV;-v|3;r_ ze+7AT@4|p{UO8B#6h^m7aUKkOr7Pr22=S~0{fBZNuirhtGnU8=`q%}(vMXdgzb_E$ z%QXow+P{x9nDu?7pP0Tt?4#U(?>&skycgin!9c@4nW_PUv?1T=fNw|0o?v*p^)NksFIFn#v&q>5i!?i37*ux4~!#oMCWNW`0P8v;#j zrA=@2UPJcqq>5FwbGeKDPIi+dQ>bm*)nD@=&k! zJZ~$uThAX6^{wLeh;!d6Y)mdUy)Q4;#B*C zOYiS_pBDPNrc&we&-r;N3PpteuEiby-ZvzC%8yO-a*6&M6a6cRo=G&kX(bkwE&yvj zLU8bxG%&?~HK=L(WwZIUva;%?7=Imttp4W2C8FabGr@e5%^gWE{*y!2mp~3obrxK^ zT-4lV`5W%qaM1cvYy4a)JZRmSyQ5KlzX{(DbO8h1-n)TLo&zJ_jRM_^Ul#$Aw;sxR zpzp&Om==041x%gP_=X492xC9~?C|_6^(s7vtUJB8VFj*(*09jg_yg2;&?>Ar3WNod z6~a5)fHIc&Jy31|JgnA~3X~riDE|R>{6cbN>bH9OdZVP1q}=ui-Ley~Ynuff>~}qS zb#s;fg|Ji0_Uei?0pDv_OR<*!EyePLxb7M2&ZirW{EdKH=x<1Tdx{wXjia?~UTa6P zx6x5Z#yZSqvkt-dmtrzE-GUb$$!Kok3p7;Jp;~vYe>V1S%GhE z8VslGD2x?+EBaHAInZ!YVJ#}J+6b(_jA~crH}uv^FB2)?PWMs?xUVa?+Y%!MfwBbN zlc_QU-u6TE20%+;cLNFIa(f%NR3wmhXk_9_0sr*@@IRjk{)hFM;M2l}6Q(o6Rm_5d z^HKmN77-!91xy0!-tP6}MFQG#;D^dJcbxDFkogADl|ovm1DL$t{2~LsMWA7((wXip zrZd5TI}2tHg2pt3R(x~wL2Fh8qyJ5r9)qpA)l0pp`Umr84SnN>$tyQ*p1v?0ZRZDL z2l8Fn^D*B;_S4tn3&^W+tJ`q#q)yi%UJJ^C9L0ZMA#-b87vUygBLPlSa;Ax?9SuqW z?u;SH?H}4Jn~8ISIS^Jm`Z8|j&l7F=Sy^1dCYi{m#`xMgj@r?y@bWI(6aPUZk6XB9 z*>?0+Nz#6#%Z?ru;M#bbmUn_Au9bGGdN5xf07%#5#)g)J_SKyGycS#20$r?B| zY)8iudKK^6X7Sq^-AJ5tS8H^S=W2@C?n&J8>nDx;?)UtC{Myk^_@?Pys`ZW*u)W8Q z)|1I`rE<7JXSH-^$wB)qYx-%pVLZhxC0nhE1HKk}br&Ta+2**?kdh9&)0%#OXH%zl zu$oBUBc}>l&$BI$j+WB$eZKWaw%IFZ;PJH_>9ki*#O17%_F>3*`sO1Yw)-X?w=`)z z-)cwO#T{mVU)R9XcC-zLqm8zsqsZJEE#jMrF9Yq77-`RPsYFv#ZsR)brHY+ymI=`E}|8Ct0Y*F>^b9VPK-{?&r~WW8X>MpiwL{XE-{{Hx0+e@S6`D^CU`X|`Ve2s zZKgEmX(=ssVw9spG$|@gv)pGTDk_*^N1OQuoz>EaRDH6Ybli4AQ1EVuIL}IhL-wbs zcu-FwgZ9Vl6Qt+t_3?)iGH+|I2slGUT%E@q4eR+WY&F^K7GtrV|IN;Fg&CH2xhuf) zTDCu6>_-cWDyFNIv|l-s&2s~Evh>D4KZpw|#G5Pe zNk_5CqIKm!Hf0eUUiyP<^Kg0Ct$5R0w^QwLhUNTFQOPUtYJdn2Et}*SQg)buvz%7YHrd&5)AMAekO*8 zi3RU^T6HvWWi{#4NnmTs%mR}$*tAZN(Q#$a9Ry@9Db=RaY>pUpS3Ra@U;55BzSrT;Y=v$ zTo2DaGoNG}{+szUKCbiWnnCl)l~yvR?DfT)nOEFeu%6cm9E;}`uea8$Pcp-3M8?GW zdB()rVnrA0q>?^yqB2}Msbnl=QU%@b_sG&M-Qce7A~b%0Jqa_3kn~JC{9t+}xoMm0CX$Xd zd6#Q|G|UTFLO{l(a}+Ti9P(HSJJYjqXz(!);e<5jxQqDOuDG3*+EL1dV2P>6x7pT^ z#?zM$OvLAPB8D@virZP)B;P?#YLYnpP)%6rMNqGg!Jt}CpZn@OIx{xo*GdBbs zS6F~hNi1Yd=N*c6cj66!k^=#_iNK4pwgrk0aC8uKo*hk&fID$=Y}csRu>$Vkfo0A* zVHwi%C&bx9P|j+WQd6X=GvYkmPOj;0(cfc!ZtjYJb5Q{CdhBD70UTzx4~N3pVt+1M zrcm+8fV~qB2aT`r5Yh9;C4x{6F;3z=ARB(!_e;`G0u6h_)9^l@B#$2ieJ29;MdiG$ zSI!B?k0WN`4*EKiZ&=a$6t|TEDzjJ8W=(H%R%%BmSL6EWDP?#jj&Rl~!!vm#58d`g_HIxp!T zjHTMTx*HnRyKF$tm0o`aEzZ}FAhiSt7DDY1Ht=4h^l{iN`Vli)Xb&NRQ5=Td07^*x zoQajtB~m{s1pg~&@R!j#H|RY5OF{#@k;rMugzgG^N5+01YXhSKjmhk#U!3Ml{&mP5 zcTq*v9+df|!m>$ApUtX0Kj@D89D(Yq`GI5zmaMy#__~|9<~61~mc-iqvzoz~{Bp>> zf+9XDE1CSu+AkA-iNu!?5p=Jh7!z^9ba(RSQW4WiCjYwT3tGK>5*d*kL+_cIT>h*q z>9~`)bx%?Ls`ROd?<#yJk{j45R+Q|wq9u&IN9laJ^un2FC*>$JA2xhWQkMyMX#k(3 z?DxaN4bwy?Pl{eou=V&t!3Ldaj&i=REBfoW!n9&HIC>JIXgK7YsO(*A<(3V1FR6w7 zEzzBf70nW%PQymoQhoMfgSS4Mx&JykR`*|pJLM_UXgfb)+g-trz1@C#9KRe%@pyDt zLe{-5(GYEZUdh6!b9_c=c2?8dp4f{05fRQxN#)MS*6r4K+`P}m-YX7Mjz{)e7jhm8 zfzi_J=sZFrj#iD1Wj)m&-67;m3Uj~C&H>r)wyQF0Si1!mIIBKtaiUb^)$QGoJ zK-q0vPmtqEJ#IOKHBK;=K8PqKNQI7ew1+^MC;0@~(LBCJ5@NniR2tnBb2P?YzkRp8 z^0$OIu5m5uWj*nKFktJr3QJVlYj$(QK^>=e9^tri zcN|wWe>Cq52m*Za%xO8R95qjGAx=kC(T|@Obt3A$qg;5s<=e?%d&G_c!_wA+6DS zz3{|&$YX^6()66}NH≷C#ge55^qSO^u+kJtaG^m2?BZI+Z!Q+^D7 z$Xu5&=jo^9#~q!6lrHG36Bt?1q%%yyG(Wa6;$D$cUiC)U_coh9DQS{oRPDvVNvkD2 z>JGFbnV90uf`H?1N?a9Yz7v_A858SM$^Fid#ISVQ$xX?X(jG71CMW+ndvn8PIhnCr zbWu-opf74h$>qvtq4Ken$Sk|noZA$m+9GNzhb0~gh*n5)`AT8KieuKAn6PNm)4kNo z55Nn`Myuc@T!t4E5#TI#YQtOsJ^uX<1--tBcx#p!+lCDyT?#jx5E=(E&`dHm3x`)v z2DVj9`m za8_QALj?=6WqSw@n{g9o=7GzxutLv_T1$k^DC8?RDRP!(_$^;s$9)CRNh+qnQ}QDW zgPEWcy4i?GFEAMdt5sxO3cV2IWOU73Do4D}Zi^shg|ED-llK%F*9k^t$$ZfHbC&tA zLg#~2JZL_c70Hz{N@vUm#dzj}%!}fK4ZG#HVUv9I7_FEyRNP74d8qOxxKd|3 z|B*nlCAmS-|8+w{g1#OrIxeZ5pnZ{J`ofS2kEr^z-AV1Va8eP$ioOc=oAuFK-tvbX z>40j;U&$&=gwp%Bo~ z7t^lxSL{LO%;Oz3@+`7!o;TVH=^ za3iBCYLdQvL)CK_d^hv0Yft-%VM?T9yetwju#1i#rmO*D&Xjik!a~kbr7Xl8@e(Qy ze}i8m+|Vj1*}S_|j8?f?u}a=7mDi*4h8ab{bP;PL$#h}GX^Oof2N5uz{}i)@kNd65 zx#PS_ZWoff&kAGj<}id=wa!?aZY=J}ia%E@>dP1X;d_YjTqZul5cD*rOXkp&wkKfi zwQJJT(>M!E?v9i@sqCSTo$F4E7X2jFd@QaKlQ(mRxzpT5_w!bBA#BDy;aBp0&rtR5 zDf34uZ}EkGyC!o7g>t9VwWgb^usqECmgkreSFA0^t~poI;C+cVBPOTQ*PJg=PM8b9 zr)^9#YUD_hsBay+59}IOC%Afaf@|OTakxIXpaZU^q7JyYA1@iM7e^%E>VLFwg{Cb* z%oMvBjrOTY>?N#3(zjthk1dk+0x4-N{SpGXnjq)7$u&|9OgTOU#d&gM8kCppzOo3D zwU8t{;v`)DI4`-!ns}mIc*^mn>q_lBF3Np{`%q0gucv9xza}d!D=pUI=AOp%GP`D! z1XJ58X=VVE#WA+u0Y2=d!A`VBm9?%n90qUtk$h zfGeiU@g%F5#{F)s+-+DCu;=uV4k7cSbh9}-JDb-Z4R@!FF`*ffaB z+jBgbE%x9BenNp@Xq&pBI?C_+VWS!wohDd3eT@QOOXJ6(ZSB;e&If!9Qp z0^N;+(f}_zUMRT^mMFN!T?-N)1*6jdEc+}IN&~K<4!B-{Fa(Tpi&cW_IrTwhJQoPR zCYgfv@TZ*|Iw^QooDff=Ro&OFvo<&ER4sT)1iJD?i=wd>nv^y^<@@JJlNSA)*IQZn zM3d%S6RemfEh?9xm6QbR`2%z4)|L_HWd%r2&2^m6FL)9VO<#GP@yQY4Z@#3|u1fK3%i47VdHLElVqKFGm?V29ac8JenV4dyBL|UGuLCyBV{DA5m z0jRY|3<$&HiXB9D9)>wPV`I;X z_n1B04~uKv5!V+FDFr|a42A;D*|{Pn(HDKCdmeIFVUxt0kxK<g|KlPF0C&Ta6L@VIB=majt;K>PJQuvIx0n9{Ex^LtuG#c0Z{=;)F$bR zG4^~V^YVDTVXzh^K}TPdMaF4;QD)Cq`hru+kh;V47Xu{O71uo7>x*m! zUXs2z1m7WhMPKZO<>KHa=?lP9A|AK~kZUcA%8&<2=_!3t7Rgik0=SgE&~W_TpWFo z?dXd+4wI~5dAQaN(v|~~rE_O}v4Z~Tq%Ri0zK*_lQrmRd7bokB6oHSvm~pyla8D`v z0cvTt~onZUnKZ@5#6Bp z+wT3lZ>k>Q3g9F3MXu5pDFSI!WUSH`35j&H`eKv-o1`z!7GRaWDA2%Wk51JWbCjS* zU-Sf4Av-&xy+DIH;z)gwt@OnlM_;Vb_LtHZO6~k7^@S|Q>c+pg00K(xu`}Ur-D3lh zI=aW~;r&6A_hkR#JfUn_;4p2a^!(@WFU&gAjc2Evj2}@fIDg@Ljk8X$4s~KG#GkGQ#TZ<)uUXtf~SG~lqSP@BRcyR z=f(Yt;!ger3EICn|KIR0?(M?AxR1^$OZG3mCvrvWi}9y*h}yjg_X07XNEsb*0lka} z75Cz7WRK%sd>6yHTmRx1{Rwvbdx6jf7l!cgw78prQ2v0f(PsV*%+z#}Pe}`e*11R3 zc^TL^!u?oI@0CT9)X5)UOGlmj^6MSYzuVz{0RC6BTooQ1d>?!pS31qzyB}i{aCPT? zd@GToMId*I8W0G*4Dg<_;uI@BUWzwzkVa0?E<0f=#~XQbkU~Ke#=(R$a*;iMm}Z~B z&(rA2!$7(G8Qya=(Y4~abnA^Ufh8Uk&Pq{SPbrBWw6^*I+(goYfB>D>p6a5EQJ|){ zC?x>vsGLH8bzGD;6D~@*UDIEHjk_qK{{>21l--}#MJcy-2STf%iEOs1trq}`+Cz2e zp%v+&+AKU41}W=@O~YgP?GYYJWrxS|G|+VCvD^;HB#Vse5FuJ*j2##k6R8@gCN3;Q z{yQGaHxM-7s6CcaHsAq{TuF5FPD_x>Swm~-3eT|+ey@bM`y;TYin|U6=Fc>LvO; z+T%;}XFfweJw~r3_vc*1h3?Oqug3cm{E-=29US4$TuWCTg+HT+Anwl`t$uQK0&Wl7 zrGb0zD;>aXg~8&$b#iKI>8+!1YK{c%zezuBrK3{x(^_~mKK=!J#$|VheoAs@9;0V* z0>qv9alRHjxHDQmm38gU+@e3hZ&3P)T*K2kG~Vza$)7_%ouZ&m(ofk6dgbo8lAur0 zPo3PItpgO?%H2`=scU!V8OQ`oJG(n^Wrt?{5jiyEpHDx12VzXoPXPptqn|F&25dG1 zV9EMP4|JhiPgQkl=jT|Bi0HDoe(Ku$N$96+(N9X%9i@I+Kp%H1rkrGj`E2zNlwO?4x640y}8;enXhg?RlElP1+VL zxtI64lT|wuO<_v8hja>Ye})3g*+qpTB6qqtBqL{}{Y;ut@EjqpqtlZ{-dvH9GV8FK zS%;qpd~D;>0QLvKXw|EB(cShlg`EK$eFT6d9RP~`huNb59MlDXeLpvVp=r-BV>8{I z@T2N|%9BzHbe4)IrFK`g^zGQs%<m}YCxc1f(X%rxZqqI)Htl6UP?I;i;*&MEVNwQVaoM%C zY?aSFPEWxwD^ce;x1HlLtaWC?2h{O4a`1TQc2soSuhZhQIKw@ND$||!0D`&oMAdHD zV~}=zb!QHLhqe@9P4X7_1SL1{rgCe)cubCOH9U>Mebb(ElI~+>hK4VUe`I~E4S9Sg zT&rBkA%!WUIT9SoOb?q+uVtz)`+b?Psb2?l!)fqd^nx3A>Qvf0 z7`;}3OM_oagA1sxdh1X_i-KwRCp4!oTJnq7uD)6p4BjEE=AOD7C?T0s2mL7xd6ed3k`R z94MxImN-sS-LR@>jJbbSPL$#%XWD0KhZD6}WJZN=j-E00WJWK~w{ssBZ$TEfMXPe^ zJjb`&B>@JuUWIke6G5U6$>HLP#kGhlHyD>ivuDP3iL8^Z+5?mL+}TTcefM~c@DD&( zjm#0ZiM|kIaCPfp9=gRdYD8q}@d&$CK{zW3;egc;zz-Q2Dd`iiYm^woI!}*ykB+|`6UQk9 zv~cc`pj~4N$Uwn z(BpmI`Zvb=yny1YCrF6Dp|g)u%u{k*up(uWWm$tqOUP?{du+mI04gLcqE2<~NZjd{u@;W_s}=EpzH307=jgh|#Dt zm47%^*Be9*J9=r*J%~xF&!);zy|Rm#`1m30iU28^jDe2fs!69o<|L(|OK9Uim# zCDE4%{Bh_@J=lB}&8dd&5-?prZRM1M|HF+N*Q&(=!^Sw2Mk}}9iy&Nge`^*Ew_ zP%jYkMbDT|ay#tgbDsf9hh??HSptb#g>lM@eCX>{bPNmPw!mZXN8Z)(aX*yh$-xR1 zgx%J^EK)f<4QLgxGMI{nRYP_wRc-Xx{P=PLs+&i3W$vPobew9zX##NG09x?uL<jX3((Q$C_FrwCTv^Q%X6++>%bFVK7gHq5-y8)Pf2v^OVX{Uq{UUsGLJfU z3(dmt+ySLo)Vdl+vs_2Z(#Wy~=C`!L5yNvxSy|4sAxAYu(G{JR4QQc*beW5Rg0VYf z1nnJbW@cYB&Clp0ADRZ?I~O5=iusXN84oF4io!B`6>$= zD~EL<;&MhricX*nvWJD#Od>QnYpg$hhJ=oQHv_9aLETr4ug@lmC9!(X}P4tKKrpeJ$wL3HD zzx92z*p?p36r4qs3_Re?T1{&`jetPp-wP>PO#^{bx+YeqM)_U{5#tzl-nKSRUhFu1DifllkyzFhtC1K9Qm z{qoJ;|3ts^6a^ysg|n67`sEWE%h50I!>--vmkqQUlKNC%;A7KHgC+ss}$9$$%8Wa&dFuSNoA)pT)V<5j!L!NhCl4?SYI;sg> zRNLaNeakH;W^EQP5S8HQCnTg^&Unh9UJBSeM&;1y(`5Z?-hk2e{F9|pQOoq$0kff5 zyA8wF(LH6+lKZJW27@vXJXbqBdY~`?<$6sZZ=&{o2IDGkp<^z})(V%OH#j8 zoZ;s=KG9!UF>#@i6kGhf9(6vXoIexw<#14!Z(W$JFI5|7WER%$+)j_N6UH7I%HljL zyWdoZ0~)E4sx8ic<*3G@6Zt8@{U0=*ek+Tfv5eQTFnF2!jAxkOEV`TYf#c&M0Z#fB z860xr_y$VQrd2cAf@bL-Ih}_I3lzM2ljE6RS%B3OfUAWGae{o zAA;YtMRp{)>Nx{!qr`?^q!SpOrLTXAqzGael+x2t`kfs~A!G50$dGA>6VvT^3_WsZ z4`n{&jaMtp^O5CX z{cuKC^gSapL3)*Nt3!Gv(;fO=<`8Yk`Qj_x<%^uB>0y~e-|cAe^L>$fQiv3KPo;;G zIw~Pm^zW=YSbk~20q|P z&`1qpKxl*pxHnx}e3cH_Kl60~t#o$LIU<{W;ENPBc9MgV=8IG|CIn$TBHgU>HoDoG zpQJ=i>ZsJ{sMM2GsTT8{YprbbbW?2xG^1EEUTqJlHZ!%_UqKTNKRhBFsByJj4z5XT zaU{N*yRLY1XM8sczMDJY`%P7`mj9|^_yb*VoUXaDDlM5$o;kBqTUTxd>l8)cAh}tv zR$LX25Ue+6a$v_w7XGYED1%;|l|i|yvD~#;se}!RWke;^z`Ajja1VXap%T6ae>*B+ zd|HZ1h;xizl*Z>!31;00H``GEnO<->;^_5)T4?e)?Vkj{gpkEz|Foxf&oATYv$*|( zNO5Q=fJhO}nCkG07OSOrbfPBi^hHV>eo4qxN%KXfDt<|jxiC;y{PI4H?o_%>SVt4? ztFTVI(j>K!RO{3@zZ_AmP)0Ghmm*k4O65HyI&+M^@8Prj z1v9Q+E`t&R)(UisRxFO58i~6)p84OR6Xm@0lbG3SWG-vapf>4L$=ptsRY)#JvylI!+1 zdZhBF=qso4M}>nm2mR}ATv5K<-K0Q?5}H-0y*EHZVoOU-NRVR^1W)YxuLzu4K` z;e_1+fV99hsV%TsT43;RXlSOcRki;kjO{Sh+=HqOP(rCaFt|#C0Bkh%W?Dg}coXvq zP8V$M)C!w3IZY>v6Yvwd=OcE-2VGl&2}h*dwXxjQpmfj6ikC9k+G{L6->hS&yxp%2 z)?xl2k9p2h_R>7jlE31VG{ak1Rf{p--e^TULowg)Sm-fm4IRc{L6M1PDc039YOEUf z-id@z^tM3lPmG|c#P#TbZHC2W*16iH#BWD)G2L<<=fs(+)LuzI?>)#70!$331kjp# z%bVk-q)bPq+&|KppH^xAo88K*l@ESloTs)SF4*J^TP4OXp`^UNw8q;9(v{bE4P!#9 znWY$bB|=c8Uk&#)bnNk1139%av0q96Y8>iM{bU_`;b0_@LDU|;fJqV@+9*iX{6 z7lFO1ecWYY_oqm|9hJN`X4)6I#1(gj7+aG`0r*sjHhA%DnS}xt zCUbtmEY2Kf7AI2*61I}*J>@rb%r>!Fq)<)S$S^>XW!JI3DP_LK@rOF|7boaypXe7f zdN=%4^T}uO7vqp|{`wB&;PBTNL{u02MNfJoTNxGhs!`zr#FuEZ+acQ1;zY}CgLw>j zC&u7?S%>KGc_O?OzyISO3Z4@9y-Sv3t{@K38ai78H1v764}c!)#PCS~9iqPR<6X7=TJ0CPW4(CS>eih}{=?!>s*~ zk@LeystgU%z?+h#T3O_b2N||bYNL;ZDH3h8@#A#GL$pzq%-mL9!RV7#l$6gfIiQPF z82np0w=8<=uhF{0e=aQQKI0eKrRxNdnuRd4wgLHF@UJjvs(_gKU^-*?9TO*8yX4Z} zeioPRPjG1t@OQ_h|DZt>m(s49OSjYh4wt?z4BG{l&i24C^)i!UX0@}CVFBDM{5n3F zUuD>edB55w_rNA^)8h7@jk&$r)ocJ*R>%z0~h;+PXIk~r;TT-}(Z?zHr0gJqnMAK)D z*C_mCS|Nd7ZvY3s9-o1qNa%NWJNSXX1t9g>ULk0uXI_HYe6o5^w3#4yVbbK&Ne+S| zBY6dm9#Rsh6NZk2)+ir|q1+ddgkg%ke`Np3FmnRG!2k|^UxyHN|H+CVT|jdG^*~I- z`|luKp45LW@NVb+Q#kz7{wue3$s`-N7bo|k-T=*lvOF$;c-cL&&Qs8SM5lhY6UtrN zbE-dO*fD|caHI?Po3p#r#L5H+3n9mHigU?_-)_PB;Hd+fDR z5?rt^i4q<@78;N~#~0H^BKlE@8ua6+UU?_dR(U^&@7)oMxC1Q^Ys=TCR$|iNHhRtz zGLBn}vOWux3sdp^-si-3BPA#3`8GNYd?zAgz;`@ir)zwDA9RB+TG+w&s~>fbub}6P z{N1em0L}Gxkz_xJ+vS=7y1=|NGO#dJ7k7>S=jd+^Gn^~)*4!fY5J#{)9Fq$IenSK% zv>dL>acCo~HJo7*-Z#Q{xQ=zYEV0WyS1yfX8kGgTug#F7LTcjJDH!liFuiOQ{QXaZ}9+r4gcJ#K5`K<^*4ace^5;Q&JP3B<1C*98><= z*H_I8GQrorM&DnPDx*8i7mU43kde-nJJRGvMAPChv{H$Nf8^pD*Kr zoGj}QV9ourD&hoPMAP#s)K`a|SfWD5=+KQCtPCC6_mWC$e@~(F$R-tP)uFYGD)g}q zO-|{rN4>HB+$WO7m95S-!~$>U`&$!<&UtYl zGL#Z2WV94w;qhj8xW>b8nOVFR_gAm1V9e+r?BMbV9=FZ~QS2>Ui?Xe$e>duYw z_92QAyP9LJ>{H%)SG}`eFZ!r}W-LBAzIy?aVkNQ}qq~o+?=mBXoUSxS`RIDYs*f2N zLp$ls=ZskOFe7Cg1GQXG1tLr20UMsYE-o}ylCJlibUmv?iS6s+-dwffbojLbS@uuy zEiQ8)E91RPL&o8G+`OP5!|#7c&5@!!3KV3y$Kp5kj~vJ51ZPKx2CP@)Vu35ZzBD~D zDxGuNrFDa8ZJ~E}bJ?&8`t3(A5ylVg*d2PSi7u0K6m8SR0mHob!dqu>Jntguz#z8~ zsE2(OkDX6?K+PT{#{+ZKdC--^x01knn!HP1ueF)CYTh`#Qqh7Pa1rykj!|TxV;+$& zbqvRxhN=&8>@ryaE+U1#K!dBJ zr~TIQg^399Zisk_2uCi{qLQB*(8tKn34{d%UdPMNX;l5eM5AdZPwt0r+Ng$`Jb`Cie;@}KfO%fx-z8*Vl1i#~k<-_$azb!^p(PO3VqIpa-Pct$xNQd7L~h;(h~ zi>ZTEtph@_jOgPG8{r9xKjR`r{J<{JNbw)RV~SO_+Ur!cELg<$0=%$maivDG|{@R_WbbfgsL$X-I6 z-&N;#g+=59E0j|4+slVY&s%$+! z(!`+oGlQfEmZ=QYMICIeC#y=3awI{XLF-`ipGbgB!xDzUY;?AWvjzy3o6ROa+E<5v zEd>!TvIdr({0WCVi>ztoc>pTbvSy`-kJSWQI)p~=i}JXxj~svFr)iTGA!J)C!IzN% zyWZz*YaKr=FUniSiShxGW;KaTYeY)CPpy(`*QSZa);3~V4)QX5_sMb*;DKGFz5^_; zB1?dK#&K}nTRba7)U@zflaw@>dt4`QN#~4FO4Phe{EUk)p=EbVFGLrqE{M164R5JN z->8$WN^bNrl2l8|chZvbl$N|Po*-XIf;=VRViEu^EMaNlJv<2~nz%uSe=P+O|1UK0 zdnbL)CSEKb98DA3lJUqUzAQi9#v<9eXk#VWbQ>p0HV>i$6Y6xOvc)#~7~&P1YJ}+B zCE#DM+8!Hlb4Gr?sN2|E`Tpn0l9taucE&agrGOl!t~6)B+B|U{$NUCj2lH{Oa*xCO zk~NIaZPNmTvA{oxEO8h8l-FOqp@tuFuMAilWLTmb33&pZ`8`;b;(d<`Sg-yQL3u)F zL8&4fK`F8^=wh-a7Ibl~c}xu#UJN63*j;iQcS?(VL>#x{iN&D+?(vYlq$1#b+v&hZ07>i5YCBG2- zuA&X3Y~0MCrQW!x!;!JK4q|v={wXr_Db6|Bi|)i=V>Y6{FOrun^FxeR43~6VUhTh+ z%SL7B5%qWkPMf=ZMSHDN6GzNDHF=A_n{R}#lg5Z<{NgX*gJ(6&x3O|ybITjTe8UfZ zAdjK*c`RL^@b3Kt@6AgkdFCoH+>;#MF2`?<&c6SOQ~SSY-~a4L`(CW+B>VmwkY0*? zf5KaF`@Xl>iH?2m+N$0=+4m<(6GPQI=-1C{-fITf5R5_-pR;Ut5hI6uLAFL82NRh+?*c%MH>3A{AUdP+5Kn-JL58>42FJi zvpo9wl)XRn0_4q68Tx?Q$0TevtRHeNk{1y zEFf!_e!)*j5To_W^9x4id`_dauY7PcMr*UtrP2BY_yrgJO*Oh$@-+HYJQB{>StNDo z7X;%8@>Q~5a5f2Fu3xaN&*yC7KgkD2)5KxP_=Wie13UW#$LWX^zaZCEO0yf+U==o2 zifiEL(=PmjpS_as59W%j(f&cG;WPb%xVRDj;3^EYqxBEEkvb=IEm(0CI%ZRq>yYpp z&Q1}kM&}l56RG3)4cTF7sjgjz`J2RE8UFBV%5|8#QMnHHD-WVywODxnmcO9Z=pLoN zAbuFr^X%MZgsQ`92w3aUL~?XcQNUtfvUBjNI1!VcGemym0>1uw!E%O64hCrb=6*3_paH+`z z;QH^KALvQ%*co{UA1JUNf(N&ukMbUdX1;usZi8Ez<^Sdf{%?NZX#Ishu1hhd^RDi4 zen9ViWKrfxGKX+Q%KU)36q*jUP#hWLU$?X=&6ALm9_Me#_*z!`hC?)v^-J*nl z@CBmu|9^hq*|o|f?aB|BPtsBP0ly_{mwv!p624qN;3CiGG*VBL501u2-R6vyn28%^~9^wmZr@(J?;6l_Dk9e z*&~jKI*{o^pGh-j+Of0pE+#{`AW2BXRf@#&o<4&Gg zmphHpr1OCP;`$z0ezgMGdSIBhZ~RG$@V_rxMepsZ?Pz~WF&*${E%UKfa$ z%xYg#z@oXBxoiN97O-9hzCZ=r=}OM=yQ>!Z?aP<6_qz)_yReqVsUZ*h_+AM5mRM_J z2M4$s3L9dr?ojIh{L+9iW?j1{Dv*T^imw%L;4NDmu#R zk>h0vR1cpOGYi&mye}bdk1XG$jrVc&hRH+<5#xIFHz#eKGdoRgA@RCi;qsJYyw=zk zpYlz5C7#VUsa7(`9%^5~MxV9TSFl1IPVRm250ZCb!DcJ?;xlsA13+d~)zC+>J}_my zbhI+#DR0!9vBVn|c=_UPTYmSC$wK=n0)>htW_`>a`THoL`03g^N`!;ddY;KoDa5|YKJx-Y*rs^^+v|ca;Y!Uy#;l#Hn-QcerB7>o*mw&7Iqqe zJuM#DM>ir;IV+tl{P(+k1$${!x9Qqz&O8_|dy}a)nNoIxDtnVRGIkcHW7K-2KaKD^ z%&kLY=6KoZQ>_R=KN9pd_A+J@t=9rv8e@GLwB8F^ZOq*_XY*lrYgJF70rfda!ZIZL zLv{IN@rPD;;;B2|U}t|ye@OYzN(cQd4)&1q9=)0AW&t;81be6!$aD$qSZllmkk8_= zJ)}RzWrC~hcgyX;3e8M!!7HY<#aFO}TMxXht=#5x443q{y%wGAo3x@im&G!ZHvexH z3o<#+CO1=2Qcp=<<}G+Bw!>|W%cz~SM)H|U{+F2|>Nh8?l@B1=SZhx!n6XN2S_vH( zVT3P}DbxB|7M?f=X|$rjaC5XW+-U7D*x=g3+iIvSe86W1hh+Nf+@5UR^Gt+VM`oGU zULoK~TcpNG+oT@ON<6vgOaZJV$6L()NWDkW>w0sdRXH+;CNN_=<@4ak{*yMych8^4 z_UVH44xFw%v7I>+NzI2*jqn}7#?G)K+uMO#_WQw~WjV$RW6Sz`ZBH*aF<6$x@7OZ# zo6qazwYGW-R{C6xG*fuBH7?v-(BLa*FhRr`8*Ws65)2=pwyMR#@FUXTswL5}8Ox$m zGgf(Rui+Lxt2M1nzJj%;t6`L#>x#Yao@nLPv9h(Gb)=o!SB1yc<@;#wShE}SymceI z1r4#CS^BI2Qmy8Fw^c3(lGRPy56-hwsM@Z!7v(5`AN+B{W%N;HmU1LWZW+QZjuyDqBXU&KUCYWlbTAUU#kAld4C@C zU$~}llaiM~JDVjEp5p`7S`}tRT3*g5In=~ku+>TDd2!x_q?8190NeCTzdnqq7jX&q7ZyVU)Po#aaWl)R=idqOJSqfA=%~7HCF_8gre4=CR1JS8=qg+l@uo2?7o4v%X z)`fE?7BXw4&*DVG0|R`nmA=B2(5rWJe~^OD8e9iQ+9kbA>mVY0fYl}5e(RNhwa;(8+59)exM|e~t^E?JC*&}!KoV-#y+AjIJKRRv6XnP=~ zaSC3|6dF37C_x$I=%1-`;h>7`{?SM#~g^&amxUOmBA{OPny)hpZ0p1t+ze7bm-&-D%m z=k%Ru&OF?ni6=Ow#b@m@_ivl%3-2QsVBcZ1=xVIflF_<)&jh{F&R5CiPvahwV zrT4^<^`6n#H1(eGm~`zign{ho{w_Ggng@h-C!g{Z@9)s?U;k9B$%`F>2n%r$5lUY8 z?S(GB?cS{5CKEA7IZh|7YEym2ReVUhWASE8`9v)CjPsX^{hRU1eibUxp+N^!=y)Bv zzg30ub*T8D3Z0}wV)IZ+t`7YXwM?jw4jH{vC`*SL^mpkxRB=d^@+mexwP)ziJ{|h0 z4vGCwT2E{a%6wmkF4m#9bx6(wBkfHcnoR!_YSf`UVLr#(>AYXPHK)^lb-2k`Tzbe@ z+{YE;#pS|o8U3kxPgn1U)w^50x7l77m$SGF*Z8f2e*1;A9&&gFnoO%{L=nm>#x;Uj z*fBl}mDq$Gy4q`bjD&pKLM`pew)JD++p{t$gB1;Mk2pb_AC@`A`28JRX?H=uwT5z! zFL$jiHnPapF(<{;=})>QHB!Za^hvdn z!J3svG*yq$b#=s_K|Jj{%J!Pc*-MC~&`&Azuw7!R3QT+IdFfo$CILZiw7gv*m7i)X zzD`=|?zRz;rFZZtSx2Y4>g8Uy$kHi9@R-13r0u;6N|2VAbtmD-tn1b9CHw-}b?IJL zqe{F>Mc<%)FIB%I_~r9!$g)vosZi11R=*~{wB%)phMjepiXW-tJ6d?wC}QIMHr3^7 z*ag_72rcmB=L+fn>rkdZ0y-|h{w^Qz@bVaGPaVP+geK}p9}iGHRY%^WBTIG8lXYYn zp;7kKivZhcj!K<=DKYBeyU5ZTiJ_Q_5-nCm1htIiVFyhzV$P;VX5URXGW&9V>B&26 zuUiq#tnW+otSk66ZO?TyffIivF(8Kp(MOYLdJ>6d3d%hMWjXErI**_oneFEjh$m6R zRjTNKiXGok^35vxYV~^&zkqWMshY%R-J{|sso(FY-;4Q8?Vfv8{P)!FH99q^lYXG$ zZ{asVnnE%65fMiy(RW=T0!DWWDxold)5M~>k^%b9kt zk8pNm_BfR*sp+Q@5t(%@zo|_>O~qfQvnMspbQM3I-_+)qtYeazU z;ke`ZzYalrosjO`he7K{e88icM+eGJ=*W3II#B+zj(l9_bWmPMXp~(71e(byDx@84|#xO56xmv>d2o+#_W#H3QO2?2XvXH`Q%|DBD3!2*XybS zuu>iUYZd)diH^*ARzDW&$0GfBMn8U|AHU_HhM~G1AJFz>c#}3M16F(G1!CsU!_+=T zPLPUWnCDdODG%?fJhgC5$N7`!kla2U8Fsg%yJ|TYqUCgQ8a3}@YDh8N=LgLk%u{hF z#QLH|H~O(ZWAA49U6`SJ*$SKEckR`2`NRdRA|qf`8d}H9Y!z#!YK=dKa;976n~?)0yFESM%9qj0t7f-PkVQm4sy{!zu(!IIaZz1exx%x z=-Lpl^!ObcgR|WnkXp+9u4R$zOibf|i~w?(eLa?8oj=r;Q?)k9J5copEjD)S>xkVs zNbEYsiN4+eBYBcC3bxAET>Xw^@N!VM)#AeQ0{HqKU=&P zflKm~91p#s4E8BDx)JT_R**w z9bvKhMr9HnIlH9Ch{$=`KIVj?gIW4~t(I>s75v1h{U%Vid`)`AP;ug5{{(JrF_PM0 zkgzma7>-?;CH;WQTbCm-|Mg^@rF!k(r{}ECre{e`qGwjJec|*R>4KgmE~y`{rCR7Y z5~t@kAp&~QsFBh7RC=CS|A4fNh~U#A$@E;*!|z&eEFK1PkKl||Gcu#qSbU$WBY2Qt zdPfkG;XZdq5a;DSPe%~@;=YWIAePmAlpimdL$L14RKX%DI#&yInd5pA`K+M0e`x%Ce8` zv~rTY(Ov!Drv3{#AW_#Jus(6>m+2PF1HWq<)Wuym0C6%v_|+*NVtNEzs{-vW1~}{R z)zq3-s!lr+p#MStI)}+Q^RLNMvH~AtDlbwp^S2lLUTg>U7iByoq+s`cI1y1H63y;C zFcGmrxX148PDGeu6WG0vO+=(2GKu&~B4SKW6_KBacuWR_?B1D)h(|d*f`}f8h!Q!+ z&hCBqcX7ZD^;Qx8&=E=GR09ef_C&nDnNKxrxs9GVRk|BPmPu5OXNqxsXCU@=deA-S z#5-6DVZE%$EKpH2kO|dugRXtdr!uFS@l|SS=jfctzJ>ghGqp8&<3wZ1c7vmSxR;=n z|0zvwV*BN*4Xp1IF+=6$gqOAyS&zyC5noT%nCTGx`}Z!zk-bizdAyIVMzXr%=1;OE{;q^_Csfbe5uMke2P zY9iA(EXO4g?KR%61I#@VdQ%``ipQAzp1f`6r)`J8@iqgm#`U}9hXat>+9n!zz9&() zd`dfmB}XwCt^EJ(Js_dox4uQSH|3CH>*kM*J66u0XxvdtL)}rkiG&_x*s#~QW6c_( z*EGu8Jw%VrndmpB)9n=id)pcbFv~Q$hds#m}jg z1NohJ-bCZpRq{e#-nvd+zQN0@@{-RBC(2D8^xP&{Yb1w6y~Ei_lR1{^@NS;NpO$zU zaRoo`)YCHRusdn*ch=FQs^t%J_?#SMcUU!iokWAR%H2#XWwvf62Xl~zU!)mZ_Ym<0 z5zxY<^+X6gPU2r`{~m|%T`y~$`N=bn=ZliagJmawB zpS(uH#G7P#=XELpu6N!g^Wp7e+5xIUySEA|hclYlx$4w?Sn7u64$~6vFxoC3l0^z^ zb)cXOP-^9LtSQ^wAlMq?Tj5|0$s{0A{5)j`+&Y=6CN=S-CBX+=;O^@ii4e%Y2Tp?V zZRjWfGH!T_$QvY;_PA}GbVztjWj}i7rXl=Hh6|^EU%K?d7B=17e$x{TzNS z1ejd{wZGeq}mxJCV1@7nF_!Q+*}f za|3ZgdUw>0CXs~0WRRY%d)rOml>X{-Ihye>-8|(T53To2Dt7>^t0kB8`{coG8x)ju zN88|ZUFkdEeanXvjVc=KFm&+Rx3l;Z@|&_l%J~k-pJcqNzH7_)NImatl5c8B9jQ)Y z6^WhPAFQ|d66eF|9^V0e%E3YoT{|qjeC=+2zDw&1p&zCtZQG5OXWqOdA^4B@vVQ)?Y7`08xR;+6CEi3d+$@K9ej=ypwKPkSB35p$l{oon zi$TD<=|Kj0gb_cXquV~>e^IGqOs`k$rSI6W$YO(jYgN$AlbH!?tLDKz(rrZ?RlBe6=Lw+11zjnLaB zd1*KrdP7u{!kN=Y=ObGoe3X_kVKos~O04LK8=!8fnX_|^Mr2GQ`Vb~FKH8zw4X;{j zg$quBLpF*{g@V)aC86J>jv)@5rBd0IIfOu5X|GaI&0~OE;ejBUK7e;H5S1q8&dtbw zkzbRW^hu8sz)-Ne8SKQ^5zR3{q=n=MTdXN#GQ58nIV!e>Xia4{QBErz)#`jdNxpwK z$;hCr>nY><-Na)7E0c+`ZsVI9w)2l{nfw}I%2cY1ykdIX`VU>sVc?6)@K(xhb;>y` z^&-Aok?E5$ro=iC>975mwIr;Cl#k_KX)G|9i~)U{I?J>kVJD6ZXOkY_M=a`34$>8^ zPPG&_)#Zmnx$@}dzX z^E&)HwZ2NouEjIYYe7Aed-4D6oPb`wXFfLshHuGIR6zP@JGalrrZGKl_GmlLkhg(R zI%S)p7ef&BHM{ygNbK9ujgh5q{FWkgIr!*Bof8^kpq zx`ojh>*ovg2P{-qe~cUK<;8D>o{|K8qoSFqJ9u%&*lwObDksU^H|OG~6;0^iUJf+G+fs{Cpk zsT1Q!-A&D0=g^bUObxm;P4q80f{V4qKXZk=h3ay3>dwqkSF-(@e4jvn86}ElynG$w zH>|y3&#*t5>8}r;$C4g_l-D87Yt)}*+5ccsP}E-(W;M<7THdR&>%+}FC2z~Ip;nji zP>f3fLa_|XmUzy|m2CcKfcZRowY*kbn(en9&Z1Nu`3+e;RDmV+n%`LPv9W+#KGu@= zfaEP+AN3Eh?17Sb#CcZOBYEq?BX~%SM)>bCsKrGEWKJ_`KGY$phR`+%MZ*#bM(-HH zFuzgrl8%!)dK~{XBFG4OJ?${EzL{# zy4=+kaJ>;|Usv^BXt`8ZG2?puQaaOvRdWH9Q@@~O)j5DzE1IpDikMg+UAHq+;UZY}a9YkERnvrYcMjiG4$y6oR&|W| zf-uC+%lI{4kcE6Z{k)3UHwt|6zmWgO`JcyswNap!NAr+V*Lhr`A0zZ*h<@bjha3(< z78#e}u^U0bqe(yXUbT259^-UTxOT=_zQTQlwbjcqBu5&T;V@^^>SO9omeZ+O=N%@K zr!#IWT(eWAkIC+|K{EdZD%Shmwr;71rKJ+)q}Fd-|5{h0j>>k)BzybXst+M?MJ2BF ztPHHV8=zaBJF>NH>2_GklCS%2!YCiK7I#zhfJ)@^Nv#l1mrgK@&23MSh{t(tQ zq|n)8)STl{q$EA0)=NTGBUlg1NW9+;`{h_htG;kw^RJaW3M(G6{ag(pdOJf?DVy@W z*pUx6QO3u{H^Wl>$Hvu6ySfl^;N3g`6xq!y`h=IZ`fRlC+0XU6((%352!-4%Iw zD;Z)3+?;ns?HdXB3P0TGWBgf~)LwoGh&Fp~18#e{K-7F5?>o;Vo&7N8zIvBY(}#c= z`qX2Do&_HVEF-ce5lA=etpt45N8V!=32S*HyR&mN>EAfjO(+t+P!abcsZQ3>Mi&V} z&AS=-}t9k~bi=>xZ3Y@MYEWPN3`Jzr=d96Lf zN>i6xyW2N9U{)16I0~OeA6A_H8zqm8nnRFYX!$*qlg7m{5a8~ee*gkLm;f-(yF@*# z9YM=z!NOf2L_1W-wIKxR!;({=1}@<^7*Dv^DWZAYPq~!_k%C00-Q

6b7`8(s7i z?-S>RmP?Uo(+3u=30k`+vL56-=CWCtzyW(!$y{NE_E@nknP%(=xZdHu0;p*i= zB?#!V)x5;=5mHHXkx)zX0lJ7qp0^85WQA}AXVygUrt%?_UhS`h(nWE+pZvMB$Rb_L z!+yyhT9FA+bI+@$xUUMy+p41GE2ts0A6mG3Ms-5-ccdgI- zI&_{u9aS2ud92R2n%4J6tE&M)R@t5swTF<&mBmM*QOT`zwROKA8;X!HNOOO_6;QaY zM%934R~)MxLbBA*+*&OlWX!oj8xS0cUR8=&GINz!7D>~6PT|)5VyRJ-0?)c%EG9lL zPx?Gljl8!kYyOcGZ4ZBLo;-&3p<$Pvq`0Yf+XHNPyj~~&k51kNm`hLA$v-8kd8AIh zPbY7boSQAgT~mFGD|>-3W_9sM&`iV@7DWAl$I6hrmp4!V=zZ)G;_{75Y+-`2eNdUn`@ zUfdE+osUem7w?hzzG%jyW0UR0&^?z>$MSpFQfh=ZQA}t?zRP%EwYl{dZOk{(7b7j`?=3 zh0+Pzn)l3=rVMXX`NH#fh$ynQp}y~qs!ro={tx4Cf0j3$J+wp`)ngj->!oWO8`WBe zdcQp`ExkTmNlEfoSR1f#JH;MTGM>ld$Tc4G^rKoo?$D13`f-VVC_!sy4Bz5PyQrdQ ziQm0wwZIu&zEHvWcHySyWVYLp*sNZ|qk4Rf%*3h&Oso%#K4eQ#%%=DB7H{_&W42o? zq?6T&`Bm6spSosvpvYd6YTF>cpPBnVjoJc#F}Hw^*>8+lZK+_Oy*^lci2G{f?w}QRne`ML);i<@o6M`z1;5{-pO2 z@prrTNQHUP(+=qb?PVE~Dr-iTD^bHuVbYA7*tgEwA?pCGb=_>Cpyc%_W;FZ$@S5qp zyv1)pJa3uSi({!!7_;7DZLX|a1Ad%kh<|I#F%I$XZ?#qqdsL`@I*z_0 zKVa&r+UC2dz*0%662M5I(|lI*DLO?An9mD^`3f;zKgB#x=nF?43;}xtLB4+E=tr7< z?A8*XNk2B~M=cLJ$Yu!z^5F4Qd9WmnF64?!wT$$+{&Xi!r}IUWwN{Q$2wJU$`#RA( z@PiUOo)Ij|?jaja)aIRn*u9>@HJlRADs;R=evmNSDcW8W7732w-$?66O!2-%+Pjp# z^17ZCQQuL^^K1l8YkmUBV}ZB$M-oLk@>+Xb|M7`wlZVD9!Q@$dS<&M{c}P4;e7f#L66n} zg#H2iD8a(D(X`T83(XF8ZcDA&;e2lU(Pb|PJx`q1ULR`jVc3re!RgAe9Eu>f9NF_` zKb*!xbDsV+#q(iR7CY}bc!59M1`ih-RlVx~S-jhLU?K6`-wqUlzy8o^MsIYEYA7Fb z_%q5YHjcLED+IV7ldI>rr(T6xj*Hu43U+nbZLPOBHvOAs^klDHbkhEmn@=~ES2UKo9(q*pDRs?xRM2Z* zE9TB_W3KEk<*GetdUd7uPZa!&^r&o369;WuKK5B{UUe8pjbNYVi+;@)e!Ft0*J@(G z$m?oqIAFS6qIk{dv9x}{3Rd*7Ws;=#y@l_a>~%F3tn#_ubv3d;OU7=cb3l-7kX3(X z98;CDyWxPVkwV(cP`k%?;7SCEmbjtiLe^>1CnnZYabG1d{^)~Z){U55G;2ilyT33N zPo0GzUbb8sfRj7S+NKP%x@m%$wVOjcW{sHr%yOX`Idp+xm)Z^v3KVGr!C0^sJMamI zBp^j&4hO>siRjwW_Kol|?!d|CX;CFdgB2fpwE`-yc(2@8@Q>%AC>c0tKL2VLJI)sz z3RG+e7Vj~_Ys7&SmwOT)Tbu1byJZWR$XMsxa^k#E#mzqZ+wErPV0xh9pfN{EGu7aO zH);#7vmHNBv6sFz_ir)nt6jm0m4S*)D!eIBv6eDK5curxwE65y>9L2UbCs~x>#pPU zMMg<6xl2r|se_W-mPZ#$%W~WN+;aPjo@KMo_>)=tVFm|cd>9D5;~v>w z^GEf8eMaBUNGt3vt!(zKb3g5>KuPd)l>ijQ-IX@RKI1E&k>=tYPN4rtpx+k=y(`c! z66np^UC_sSZr_l7q2&_cnc?f`I-*2s zGna~RH~%_=-1f{S0`B;+Ysr4}aaC>Dx ze?4RTII3l`uYd>cpezTJ`I!!XnEm(uiaI~DCRQEi)A$NEd9BOWd5hV{GJ3C7wS+6o zYZxv_i&o{x?d90GmJc;^`Nn9;gB(-vpeMlfAOY7w{|gWAY`EsfzkRYUU@SPOk0VU0 z#bEu)L1xs>2)I_LgN90GvY&5_)m(7B|6<_|0*BJG_89JQ#{ag->V2k~Srt8JP%ymytQF*}!*l>3ZW#C(OZ5g5S zp$T8{2D!{0t}`B5k+q_-H>uTRHbQx#^{gEZnzS5;v-)a-?s>B3t9^ZW#j)ODmoG8w zp5%*`uOl(vVra|v4X-7ab|4mjw7aujobdCL`#_@asU9OTE zf5zx^qQ5%R*F8b2e4*F!&9}<`z+OMAYK}GS@fWhdxcNc83s`k(TFYdxE$W+NEbu*U z`JM_*`$O7{p7lOO0xc)_?P;r{RexyCXUIbo*&s4oz8ZhUw5Ohj$J3h2zAYtTujYuR ztIC9+R+A8#_Eg#oMrAaoJN#bn`62C#Hzczv40%+27>t%LH0w>(DxqofPnuDpQ6Et+ z6FBXZ;;LL4EeE*r$NlYVSmWa97!T2TB#xx2JuMGLee>-R@5ByxQ1j*Ut+fpY_iw=* zvMzrl)Oz;R%q5X_Bdw)hsP#nS7qU**)|babeUHD=6q@#UnlblcARjKdo|7MA^lGd8 zAqr)}B2=42L#oCxqP|C1!LW0HE7s6zl|SON-Tp?)Hz(?Q%J#Qebe_mF}OHQ=>5gu8BMD{>0h58B(m@^Lu zr7w{myqH?-4X@P}z5H>%wb>gjf2jFUhE%=L??V5dV#184;Ci2o81q;nkMfFLBcq<* zkBkO??@`x{x?=t%aoNH2>1w?ZL1c&jE3yRV3^VHK6Nq9V=A@0ZJiqfMLTQoO1X>T0cj|5vQ_vvGo*8;AS;d*nAF8t5HNXYT}-xL0=3J z=A?%E?^OoHcpgiCCVgP{p2T}|(@o0Wn5mP0B+1it@?(-5)5$mJnF|^()(#^AD4Qq`skyQ!e-3> zMfrud&S2rlJSS^Qp5OMZCeQz4?rq?sDzC)+H!kz6iU(k-sE)t24rue7UcY84TAnE^@yS`06XC{@7M ziDMP8g#gO@zvsDkCKJTnZu{TQulam3_ul9Ib2h0<$PEukis(93 zr1rDePx%_N58A}SW@2m^Ut#l4Jug!k$k|yRIEn9=*u3CPZsyK#Gd4~|s0tcfRNtLh zk?+Wggy4ycg+gl!3w)n&;QLnIw*=w>CH6deT5vn&*&JDnx3EDQgvwF zKJDqaC`xT9LdxZ@dPF*^E&V(wp-N4M7JG@(qwCc0xp2MvQh~*6lL}`FqbuWfM7!|0 zBifBa$N#HL(u^*yxQ=Af)MU-(RDa%p*;;v5N^?>RAxsONA-9Q3wGV}}Rpj)GPTnt`0&ZZT884o>4!nkN;?ScN`<{H|-~xByP~@=62nDQ8)i&V2hui zfcX(5_q)Nmk2+&-?t^P6u&ww|Uq&^$6ZAqF*@iH-fOC?H{A~XbN{EP#$E~(9aN>WI^~mml0E4G77gnm>8D};$hpk; zR5_gH2H}8`ufeer9xqop$}yMagl|*fO4&mNh_2Nt2{T1;E?$|Jw}C8DOF1hp`BPzh zm2ij#N_&$7zaa$2A;4Y+KL_k{^#?QfxQn8gpP3ZpH)A0l2IQtWz1=)y#>DZg3HjNI z={QH5Mzo?7O)heP4wO8Y5)ktWMUxxs0Zyc~P7)@UN&<7!hP+GZ?>+yh*a3$(i0~0z z*p3!TY`)YP+eayF4TI&Xd!bBoac7{Nrseg-ktp{o^ea-R6>c-k7MCGt*acdU3Yn4F z+A60+d#H!Yyu}uDu+&2QD?Ri?L^oCWmYNGl zav@zKt=9cgx)p8@3E^wmGDFD+pd50?$b?}+l&FRv-uPupO&q*dD=Q$2j-36c)AQrG z|I&zFEBs7X!j#UA^8wkP7SjZFl1RBRdFA;bN?I?|JMvpt1vvRupc*Z zNw+`4V}D!vq$+UPp4jbDo;%WKBQ)W&kN>gd)9IC^fDt|@HkL43FEL}csh3_;Y3{kh zAgocWfrtzkP4z;(b6y}oCpR@w{vKfk+DQjs3(kzXc+!C$XE2c+kVdcQ^xL<3M2QTS zEbMCv9va7kc&^l$Boqj9Ks|u%R<^u!cd^!dQ2J_ zsCqM?O?fj=^|odUg%+^OuGEjg06Zq0RIyXv40t|NWVgTK0L(4YUsWr@n&npYV(a?F z5Tvg`aOcQs;J03MoGLr~)(O;+Mzb-t(YkX()*@Lx0kf>lZ&shn>7kzP6qtBS8W*q^ zTnR#0*xqv%+gncm=xvodu$yHmWSPwWP?+y@CKJ>ubEh~q%a%z7vIDU{>cW#|_)LF1 zP}LdGLLA2|Y_lTm*7R0q3>BOtEB?sjN8-^_aGavTX)WB$sSJR?fg}b&cbLa3c0`XC zHGMYPJFw|fi348v=n9U_;;i@cf6Q*Ts=6rMnfi2dcfo9hE_?WhDOu*NPyt&1&XNVh_20O z-6Dt?`bB}yn0QZAvIB1c+w1k)Mt<}}!Ga4#xN(P5zOE|JsR7g0*(xyVMjczJqZjd# zTgTQy*)QCRmTZyTM+l{$g4>Y-x18l(ykqY0Bic>e{2g8#W%O3~&Egib+ny#u)g_|z z>4>Qo43g&Gcctta>E9vvVo=N3sIv3g7&PiIp9xfr&4H>T#`^nR2_R6l$ADquPqA^B zR1&C)v{}{Xge)bb(aq{M(|b;4rBoYr0R*E+F-EqW##adscYezjwQbgIXC!^C+no;H z7!&lInw-r`ceW+oDUmeZJ@V?)R_#<{zen~~ZPkCeAB+zg-s)q!?5qq%dw3>wn23$VEUkk{2yB z8lGk7_Fces6~vOQI!64>4r>mg?onuXMC7fF9eQqWQjV1tN}-F)(gh-2~% z)Hiu%z2zQ%Ml*y=(!Q zlw9w;Xs^iiL~(Y4UHlaFaJm+0)pxz+Y;|{mERhFGS|tcX%noC#FrZT#H5KSEPH3e{ z<(VC?gvLl+Ip>w8!X$*t#B$z8Eyv(^)u#&*e)dH|)DAM{sK^1o30BQ+_|4Mo&cLJ2 zW2HP8kM>E{=+&%yP8)@VMZ&f+BVj{;D{?{AYY`2Cyrq#MWdk(*=36de4w%?5R(o>N zew%nJvNBNho)!}^nT$9WHLUQX6SjDJ^RZmp(3?NO4E1_5Yig`e?3ZMuQo3F2MP{TB z&d9|X?67*5$fP=4nbe^LFQG6YEvYzwiUne+Edb|z-=+D^@F1M}63Wo7aOxPgj}K({ zZP^ACGP}pR{vLOW{O^#NH5MCh=mR2>8oS8!o|TRx`d!t73@M8krUvUa3vR$VFZ=u! zXP;lKLaY~$E`j2~4WjV#UBPhd{ zC#iZ#C8L-fz|ZC+{#f1S*p`6ZP=#4wu1EJKAmmSU6CJx_RkF5NQ_vC@=CH$&?6={`y`9Dkamt+yxLmwn4nIKx2$!`EzBzwmxA@?J=}-7cx-o(?$aAoY?x<5a@cnS|W>`KB+762_;3o!&AjQ}0CJo_TQuebzz> zPCLBX_mayvTguq>?%y0py4A^u6Rl1N`nN)=`9jdDE=zt@j;B7cJ|+6RJqHAk^Q{*7 zUt~GUdxe}%1RhM@@}}B&f9*B_pj=_es_WXqD0k{CBva@1O4>sLz!Wtj#q4m(0wxJB z7o0DeL@3gc)3B#`#~f7&L`~I|-}$WxANs5EBLmZ0)GeKsQ%XL6IRY3pjj(B5`WA0I ze>Q^_&(HJ8!z+~ubscZnl6Oc*G0D`l3q<%SqfQo2mqM0;D_QVva&uv~b*Tt;80#(G zPLWl2N*5YB5%P1SJLag_>4=B6YKoL~+j0d2T(-T84w<**lX)Ah;nyi$u37YJ%pRvP zU`vKeP87_B1dU0!$*FIH4{<{B*{?FyFrR~@Sv_(|GKkKj9a+uIFeDY<4k3dz-%pkq zLU;`iG!xb3M19qb8stQ&{Y{eIK#3yplMN7(EYPgoyO;4|R8|MsdN@PX<-o@Za46z0 zE0%hbUmy=>c|*<&blQ^b6wn#y;Frgf^5}#2Qa@b z?!U^@<>cY$T6KH3>UMPDl02=|q$hfG0jp8FZ=t-~Q%ZDuZm;roRJnv3c~)_m-due= zKXOCBy8bu|zgzU4%#8r|9-I#76_AG`uhF9?i<&+y4AVId!{o2n%T|eX&yjhkj-}4_ zSG~HhSU9DD#Cy6@`}OF?`2iD^03+S0SJ8r|WzOQMLm1ItAHU_bJf_l>SjR4w4S_o& ztx#ujf2-EpSqq8I#MFwOqG&J(9o1Po3Mmnf(rWckh^Mo*T$WB}Eg&P05+`M~6IkN} z`klvU=K+vO%1S56Sm!bBHVK6DlBiuJ614Y79-g!Sjk5tCis4MO;Jc;x{ znkI=mYs;MKOTWNZ>T7+$P<_Of%K1a8nqbz6q(*Wj!H7TdQePyPr+mvJb$0)6y2h@M zH>*byjlsIp5=QVB{IB7E2mc58&&co8XhNTethW{;F>?E@OI!3SLbQtuU*&qQw&+1V zqD{U$t?i$AQ;J#_*N)T{wW{!<0rMKI+LClvw6|bhL$qnsZS($#I}x|dyFJ=eHgMiI zqD|$Vc{8I;qdoJ!Zq-&xx6Hwzo)EI=aD%!xOZp#~K0GDlq;asw_`lt@iY&#r#~qI6sK?9ArhQs7hi#Pt_tls z_7V!qM8{Xls^Dd%Iej;;#3ao_=a);T9! zmkwy_s|QZ7XI@r-W3K3?IY!++G86=G$)u{O+ZR|oYRIIvQN#3>jS>>5IDy7(VDZSo zliEgVs1gUUaIMA0%PbV&`Xn7*sl|r!l{3Q5`D)*JNrrI2p$S7)Gf@p$6(g73&jmyU zGBGmA7{zsU%OyuX7gk98`hi}?1czAt2JO%l?w}FZFtCu{1q1W@4cm5xH9KroyPCe! zZ`3*%)c>DGji#Mp*l4!yIi#ndXGHKxKfA?u7?^-(x>$>y0$g*3kM-XVf5f(G_u&^C zjwP_x0nNBQw#I)){3C>H=%(xp$-%}}d@e#uqr!n{@aZefjmKVgLb{DQOoUHgfeI|T zue^2H-WW5RmjQ0DOyR#@E|YTh!xO|rYYhua@P~riE(R39wc8am$X5G7xNaZNHvh`} zJTSnhPaD>(Zl0g@+rO1Gh!L)VkqT6Nh}BRMlzH*7Rp%c+Ypu5Q1dBFg&00yBqdp5k zzMPjb7l#BYUcqlnxDKH)c>-0>YfGOax!$tLfx}HyEA}%S_epYv`00b)b2kWqU zJNBHKwkvy<(2jt3XxdwA&#a-8lhm*YG$7OW%r&YNqdr}0`)jhbv(RXo7wT(Ey?2Ky<+oqy&zq{f43Qie3X;cpoyiHzVitv*xe$~f$&D4 zvxd3JQz(Sqb4c2qd=zRCzQ_*Fm2;~+Lx26|a{+S;N;GIl$%bx@DntCE^cg~R z$&jb7TSYXCZb>D35YLj3PBXII*^cL=c#;&SRer|)BDw3UAG5oZDkv)3vz#LT(Wx|O zFFa%P1gFNLej}{#8O+cCgw+G#pLqHv74cEa&v1G3P4dYnKf~qCH>pHE`57*6zDcF> z$_Zglt2VSX(Lw>;9_1Zf)r?hCF0VFV#)lm_7ay>nBtf*&X(L5cKSlvzk3d z-OC}*2ZraQQHL3o?XdtIsg-lPQn-|)%%h4S;=A}g{xWbO}| zuL}NEI83sk4X5U zd|p>dinOGVye~-57v^o-M6@Wj~IMu!Z~bD}ZVrQKJ1+OD3n-ekSdOXkuywFpg? z9h^q&UoRm~dsic}I_H^HmAMtCqY~p7I z@`!SRZ`?*n<%<)E~R7)20B>8?T^@7imUUJ?~zUbOtSfIDB?#fd6vIU z$Qx9!nSgIeFEHU$E-jO8G9oh$5OEhxxUq+S)U;+wzm4y>8{XwUyVcXt;@%*LTwg1{sUbP-&B*JKgG~vR>okqMKCUj5lRv9bgH()o*2qE?c0B3NtI~_ouC_&8Z@a zE*wQEz|V{`!H*H$fOrV@tQFLlx45w6%Z{sS5ykbn?E5^S&`6)YNC?p^KjpWZh416q zonJE&;$d3vPV%Tkv0YT+)07c;8F8vT^x(z$qW{?L1x8vK@wA)}lIRIsWakv3+zsy9QdoQ;?glwK%I+7~Uy!jf zI=u;1oVt8n6G>*ym$LD#2~nWTP4fn6;Q!tH#0w?EpY&IJ4SXzKVd~7U2QVl!mU-|`qDX`6coA2OZ9C*OwR=El*cuR*IW-N#0NOB8}Una6p?_d+fLC(RMF8B*F^T49X_Tmw7RSoXx_|t&-Ls%mNJhf)=ptf!CcM3W8H=?hh1v!1CQNL3zbXiaO zdTFm2Sz)#MWaPLPVSBGYx~2VG_~oA~7!ki4qegp(~F}K-=I8kWa{--<9@P;mRg-!fD%_(vWp) zIUXR^G*fEw+^@)?n&?=r<`YV3N>YzD`aF@#b5F>nmQ2mP{p<0YJpoKs zoxNuSI1Ei)xaigDa=za@t~T7m>9aQym(!9=7VE#r@_>qyA?%O|4;4gKhUyk}ADPG` zo{~uf6x0NkC$C4dK_*ZlhkH*I%u+MsFNkodB(m8*KC(i)PmD-_qm3LKouxOvX4DNZ z>bnGJje;qqM%|0X9Xm%Go^93?FJg!`fwQWFw&Vou;BYb0jtQmJ6G$DhhZZ5;%)q-f znA`s8Q|Y;b)A)pLIhbxrH?<@@46ZqtbDWU%^&(x{P(0ahUFQwiH+k{lF3GhAHc?A# z1f`2_+C$m(BjU!PNbvO?@8~VBNomMg+7YHtn0s$ zQ|LtM`X1V4=`FFXQ|y^v@izQN$a5l7>7pmdIoo`$XAMtX-4&i4+b2%sxmY|=w8N9kbw5|NRuW6@Lw>UkC|q^D=!t{XTz1x3b5>YU1vq!zsYYkEG|ZCLiKCazPU7i zi@xJMz2z;{eEUJ<>I}!s#l_$dB&8G@S#8uINg4SS*1wtpiz%?LA3md}g@RGCb4F=i zA&pJp0sXntM??mg5%Jq!^~jxQo$>Tr-z{=mfjr{$X4JaP@S8UkNe*q%hXNgEY{lrR zNnXwVJn_+9t?4`~|0*@ZgVOOG$uCNuP}ihG`D$@+`%b@Q)}~KPg!P#}}|iAGFu1WgfJjqQSs%;X`DT3|&S6GIY~YDJ`o;We9W7_qNf}DOiGn zjg~DAEm`<2H&><_mAoZ7ja*W$esn;AqwVI2E+I@`JU|e1CaB#BiYL8g9<=T}(PdJb zl7rUFSBH4JDaX3Dk|VCEUcEqb^hvs{>*l1lMNbUS7Inxl*q5)BN8QMO!T(?SHGT0p z&94rd0>0Q-+yIgJIRS8&N9102xc;bYGZPjsyG-^Oa;55=0-8^F8U{X*mXNQ8 zt$EW3mG^+kpYIfyx-x7%T|-BM)&mBQu-$OZz+mD%M4+c!TIV^xBDGRO^~GQJNCDn0 z-Xb9obEP3+w#$Fu|J(fE$N!`J%lXh7{Ach7p5y|?jB zTJ_#M2K|r@Rjh28cC%Wcjy_Y5=p5zJ8%Vsm!gkH*5C;Wf;=-;SLbWS;4%2Q&z8dJ_ zMq#rqK9GBSc+Tz);F4$2>y!fwK;^C)1#J*my?E3(-ZAdKigT2mk%8(ic^xO=91I<-|BsjX}hAqSnapK!%X zq!~TMxLlG`#3YK?==UUbyVWZ?h^WJawJFb$sCbI**~(|*C;`;Ak>mWRVcx$NLpkI+^XyyqAij8!3^h0hw@ptf)f!r@9#iLg9TW@I^4ZilO~iA z(;x?Bs21{sNLkp-vzv2j$@3s5yxM(Y0Es-Jee0CDP84CCZ0lw?ujEuZ`zo^o7jZ{} z8X~Ic`cBG|gwBMPDj-nWvymIrcqAMOn$7ulT<2jXR6aD zbQ)VW3%us+w``p!CIYSY<=0<^>Wmz5!nqtJD49P7xlwjM&iHF$Q=3#`4YR)P4b>&W zcXWL&$PLuGbm)#3ht%S-5cHyVJwLSk=mSlY#c>=rQ*C}9bc@S$@ z_31Wh!}q2fvna_ovfwb8dN8b$-M<~OQQWoTtzFEEOyukcn@0NjiKGf^Q{Ms_#(s!420WW}&xZlepA=PwU0C9eqhb}V@011v>pzl~;ggM~ zgzrcX3E%NMIu)lk1JgJJKM<-rKGiP!0n9x$b2K)%P3-a>OI13%hHBZWOSIT^40O2u zk5X9B^JhT&%7Et(r&K^*baOtU(W-3${MeT@JwX`;;#nqm+3jIdyYqs4{NGI zxdwGV`|`R)4F9U)F~%KRKZjGu=m`&9rwG1>Xsi65A+V<6aMh_MgtZiGy8!A@}YI-%wJh*Q} ze3}|IJ6b&{FY+g}bYt=F<7PIp7X_H^#Ek zpfH@%d>;odb8+D0D;&U^Xb69*MKGwcVtl}wh?T*KVw|vsTPTo6=#49?!qBFo#AJ1_ zQ)Vk{rj>b%hxaj1Y5)BPGB-iqR`f%k?aeAHe84nj=7d_|H%#N!egR3-xUFBnyQXn_ z^zKr0%11F7Ryb)z-nF^VZ3PZ+y6{G=Jrcg-B=*)Lh5B#PsZaaOmlN+`%I9Uyza2#F z5p|W5dfO&{+fSQeg$0)v>QAV&J5}19l2#e-P-#!-Z5#bC{N`1PMJS zcARibdXVf`x-EJSDOmcuYT91(m%dn2+F8?##UAbc&Khl1+Pu3AXu7LjOzS*7>IPtW zr>xr>IK=_~AJUaEu5d*+f!^AHXD@*XmQO|}KsJ<-Qz1?=0kW|aPt`p;5QA@L0Z2Aa zH<4LQ`>_ zib``|g`jd@6;Z`I(8dkDn{xoJSyJ?;52EkRHvDTjl+iY+Ng_8&ZC)U3>{D(G;CtBdZqG1-QB9%sXL~b0ZOvi~i2%7n8#3M3Q%EB|Vyi~uwf{BmTzcvB z`J2&y{;nFM=8wfE^S4B)d#L%_e3qJ*E}6>F>NPWe?r*e{WQ`HnF6yffL% zIrDvuGvCvh?~xZ?YkMztJNQiBe1~)A`ztcvTxi{Rs%pE;H@D2CJHOyUX3k`5r%iUt zN6j=*=DU;mjxgWvHPasE+c89-=3C8Vu88*x^a}1o;ozK`@C}zo@2<{kyd-4T&7m_w z|H4rvOGdKAqV!kJbxD*B;`-;d0Cbh=IO2}#ravgn=^xP?g^OMOPaKYO-WRl%3_KuF z(FE40dkV}Y6K8@fB)GSK@U3pJkD19yeVZFx-aq(uf>|RtlI|^u{6ucD9C=4HDP6x2 zSud)xVN<99!7146`_D0Bx$GwZ$bjSYq*xl7gUJUym<^(F! z80O$F^+gUU+*bLkzE$0L0cDY*QXD`3rdY10=-RSQF*4uqpKiM3)`wU~Vs<`OBZFZ* zB!fY|ko}YxB$ceQ$H{UymVA}#79iO}G8blSFX^n9jE@<6kYB|wVWM2feH6gQT!|>e zmWc0z|JF$lldl|>ZaVKRd;4cMvRMt=7F+fBqQrEZWP59=G|Zl_N_HG(WD_U13O=!7 z%|tHFQ;d7;1sZ5QRKkc9JoG2R!3%^)DrLaiZgVgbw*~Ds2Qwi}u$#|}nbg9iai2NK z0Dl@gL#fa9$^R9;PARKBr(#>bf9M&R1`_9ySk|(0X<^JxbH9?qV+c5e6;0{W2$%_c zUXa|3NgHLNL+Zvtr zz}$BD&G(gvG*kVLRx<16Koh$5{Y=F_Ptj`(rNdzAv}X3}{c zzC^mU-?1Kg+ZB#=P?2NyJj@SMsA%Tw6gs4{8W4wcRs$lWGun>~J!%$_mHOI?W!~+F zO4WQkB=+_By4v{?d+%BD)Y)&I{UYhv9VH=sk`xZ&aMMk)9(_bQ;4gSob)+A1pT06= z_OhQd7o+;`=VI0ARL*=vI*>Rs@;FY&Oh`UL?g?hAD&1^Vh38C-7wpF1GA;OKO>aV5 zr9z9{C9oEKOxh|FA&qUuBt|g$;iX#aQX*YaijK%+u@?$O0j!SNJq!JtAp|DWX21d;tD87@#S3S!u|8q=QI~y&1y{ef5y! zootW#f?+z-VLc>eyCKpCnLq0x$vL|{U|r%b_%h2tItc|;2^x?z=xB~PZR~rBg~_p= zx|P}mwSt0v21tQ~W3y$xG0;lJ9DC<>yXyuhIp9@E*Kkb+HC-W~=^%H*o;L@Z3$py4 zad5~wwR}JLMHaAGvX6kSQv;BdzKaa0WwY!m{iO)+B0hjo9QFkm#RmXn7{wlfl50yP z{HotO(eHnr=;coIeu;j_iT)2Kx?7@u>_qR7=td`csT2JhiT;Tbyp|x{vzU8JvKj)u zep9oodeO&?HItGdF=H~FJOo&B>B$^?;DL5j+g0p@)W zKAhb^xi88#pfmaGmsDgkK#pbuEi*e?}US8M}VT~U%+>>CbNmvxp!Cai8*tzdt!y8HSeSbcz`?c0HC zoiUfWH45C>Q!`D!)VvqO4oRE?1<`c^U3m@X_myBhB|*u%D%EmreMErNUC4d4?D(=1 z%Yk5?b-#dQdYh@9$cUEymc`%G>&!ISbB6SjHwpyP>=S6|pT14V3h&z{WJogeo!K8G z1!z^G`t1)BthEY*7p(pG_7GruIFUNf-KsP21O5L;m;Uc+JOm97{qN8LJ_PHh?FgrB z0oePDJ|<0(8I!j3p?~4`vgrR2fv&LqXqkim?}ROSw9MH6?u0Me>}&wv%&=sz$1?2# znIZcTv8~GNOYwX;8-OZM@duXL|A}z$e;JPDT>L+}JY*^&0ahXx|4UoI_Fo47t8uo} zHXtEfA!h516Q515b2m>fxEer`v}^$5Cfmj1UCf_hp?mTb=3lp*Bw2qMk&-QoqG0WG z=ORU((-~!lJ$0uXA6Y7~QTMb$CW!V>_;sW@I14&KNk15DV)h#;z z&Y>V8{BVc1!E0c@1)UE3*y$~A~Hhw3;+#>M)l$~W1` zH(sLT@@c+PtrU5QTjK+6&O((_czl)9M|98KZrlLk2KSZvr;pSC{2wWGAW;MQqF!>M zMyb$DVQYR4FeKL#)l(rQM$<*v9BUqtxPK!~kG}0e*WQ`%H9wSKOR^m0jVvRY#!7uf zv>n$k-;oS_VvRyRzoGJX{+T0))LjTH*0GxMdgLA&IX~~_6wY9O^2(f?iY-fi(aHQr zGJi&8E+Sv*8=2aiM0qMvdV+)wZaUv7EA^pN(D@2E=c$|sOY>5Ixx?@!pL62Z5kFJK z%PQ~V9|N)XvtXbg>!+kg{XyUH5oT&42Lu2^77L^QY)ewq$dfj@&w#7O@d_wVF}Xdj zqEDB_pZ(V#_79;Pt2E44lhbIr5-@Dhk8bfa?9Ncrx7!R6AqXLrDwxV{-NMnq zEs*n?-}+8*iS@KgqMK@4u$~sjK8C%)@mHkSv*@XU8e|%BT7+HX zB3#4!bT3FsaSW`$hKms4SCA?)+}yjPx8-<)yS-vFQfLK{I@?j0-%>D0a00?>dy;y z_WXj6e)Pg=xfP(9FB^9FVJYKgw~YJA=B8x8q=zFpo0-E2*W5weSbkW0Af6gfrTf&9 zipSzu(z`H_*D#Efw(Q#lER%p)>jPr&vRElZt``lS=SigQlL^{@V7&lZCQ#M^%t)#?7x6v^}&`UQT+*QB2Bq zzO>i}AgMl{VKrfYCC_jUtY_+M;Tc8>y`=bs!~OV$UMZYC5C?b+eZf=jN>?4y(omG( z#^fs4OEV_XW=x{{*ao*{{~g=#Rk|Z=gHOqa{_LJFyy%`U^sg*PWoKj?4zSm`rwx5< z!%tPQ5UqZfY3(qL~w{^e3 zu2J{hB14e|*D*cHI1E;TCgc4q*_t^L>zxH|ImLvzkk$WBcxaaOY%6KjW9FPqs&ZZrAQ%0 z2`*43B3$?FvZ8Rox64YP>t*u7b+?saCsCc&;i*?fENI924((!nhjzbnIE*_p9EJ-T z3KDXqO^=i~%!Z5_Jcam~bQw>Vj-wudC*tIeKZ*y!Z~TESO|ccf(Lv;C{D!p4$c^(H_3Ar$mbjfd%+Qb!31D7?Qnjtw{5ZyIOaH1Cbcba9s znhCuKCPEoz#>Q-anUiZ0A-n%y|FvjSQC{PP&Uqc27Mq+ppSdFBc}tr01beeg3p;$E zs$-{IyTbz~#Bljk_v3DyO~d`H98 zXgHx~d6h7kO~WACKR~C34GP<_L(Il=q|8MC;X;@BH<*DZcAvQoI!Kr1c89 z%%w7Hbl9m|5-Bl|ARJ4s=13p?pyuc6UsH$RNYbF9e!`@uxyIoedMmYzVPJh{-|W`s zKELQbFLIxkyU(lSnF=@v#raKdjUM-kO}_;tkU{kR#%;9hxs+Uq;uhA7-=~HV&NaUq zx2H&Vque!{!L5Kee(uW?O6HXMY!3dyUi!TTwP$Nx3ItEVvmkT)jItFh)kWC^u7ik>Zko3>$Fd6w6Hl<&b6WAh|x!^RF~W zPCNZjde)MAZ>6UNOQQ0~?MEJ|BKujn;_YRVHu_8b$rehsBWcdHgr! z|LiX-{~(JnxBVqf`8;yUkM@>F4rW?kF1V_O(ldkY%;xO&zVW4#nemm#%=pT?Grnaq zzB821$K3Ii1ljQw+JTrb#A9OF{2TaZow`QDkkBo5t%QyWHA=8ucb3lH$hB*V=ID9%f z`0sN;>J#8SI)}&W&c<_pxV>$_11XgPHU1kkt|8KE)sxizM8Yz zSIDJ8u~r(F2pXp%Haij8s?BNdA{8Q+E0mtu7bbZnCC%hsz$CBZc_b>)g@Sq!vXO;W zJUuBN<=pRSxES?1a#h;frRMY5OWtf zWL)lkZ&;UwJRH#-Q}*4V^P%VPkx=&+({pBIw^6s>s6SZ(%wbx<=g7YNJy3_rnG&Yf z<2?yRB4|(Y1;>nfcfBv3!gjrb62F*njV6jrWkWjJ`zi6~A=e#L#$mScCQ3c&1l}15Lx)MC=kThG zbrsv*X4H^e%dO`2pjklI0C!RLnOQ~_aXw_(fMMc z4G-Ed+!9g)f(oqWWPJ>3`CTHIHaCkr0xB0B^bW_FnuX^hs~RR8 z8M%etA}&3WOWCF-;)mn%e5}uwR=u>aP&c1XovV8`_wi2^e~@e5RexCcXHhOhUtjJ4 zaNaV#yJ|vFleDef%Hy)dhEfD>$v+~$MCPLI10dVSCwphIlQ2{?QKU?+<<;EVa~`Y- zwrI%f8(*R=9ml8m-fH~nn0-jY+jHSxpebZk?-h-(Qp5^Sqr(@;d z8f8)NE@?x0lV0_irUcF}nFQ_eSu1fT%o|Leb5|jO^(sltp~4F5A(^RToQvPibId;T zp#?n6hvxIk8tD;h#2I?U?>UL3FUJZw_wlAAn8o{2P_$;3nK-t?x?hT@+M!L^c5H_k zZWg=ofhBBpLKp`+Is0xQTOEjy@N z%gSVliW<}Cgl@&;16NkCXV}J2t4v;&l*y3Oh45+@7iR85>sBa++GcSp`i%Dq9paGp z&@;a9YN!w)vDHhsL*C-Lb)Qu6Np!y;x@YihD8zxJ@6I8Bni;Y@MNe@}X34!SK_vwL zbOv4)x@^~2rJq2ai;h^qoQ^l?n^kzTN*RXt6I-d9~w6zD5i zOi!-lC>keylNwduGG(HGL7DJ7OJcIqs`BJ1yn|%884S$RO3a>LHYV4B5>+*{;1t^$b`X1<@ra-rL z@7F{+WPNjm=;2B@k*pbO`lIIbHf#EW=JZxj5zgG2wb*|`c8d}8?-#OQQvZZin6?Ze zm~2%a;{NXn2N}pI68^Bp2bLhqiOISaC?XRc@KTrYBPy55j`CNFCR<~V;3TlsFvoHO zI#@Kh(<|4;kpAT41J&V3R|2Flrh4;_U-xYS7M7-!vN`dBItUe%vv9C@1k{#p1lhVs z5C4pox-*shcaB&T3N4ZCR;U?JdM^HxNI`E-uV#VjCW7`V8J@x*){K+iW_-hTqbEAv zajrfMkg|r@&@ubeehdDl_$9RFrTDV+vc5&#;#xrU?*XQtJqy!c3iPWo)KDQoR zBg@V6pjvg3E}AZn^cbDW;{5D(iKkZ*&qKcGl6>*_SYGT?(Y&g`+I`nBoITU{QHSC4 za}L8Hc$32vJ^X7PYp!Q*p=f(}Pfj}_?^m@r(UwGi--(v@o34m3Lie1y<{u$;ps2!%PMI~2nl7q0$=w5*a{@|*{3EVrcm3^4j*ugSjG1MX{QlnqDy^^=!jZeoUIdZ^k008zITEV+b?{sXm2M>tlt`%bDRHnsLZw5A0|O;Au0n@Ms5CxtV7P>;wjMlt5VUaZ z472Ft_NZ#&Z{_2q9m~+QHH(Xy4}MTnbhwRlLSIXNi1!i?Ksxd7e>}dB_**maKR+#= z@Nu1s+G&ye8TQog80OM8UY{8*-{uK)RBz4Vuhp^`Y8EfhPSvzsE#_Tt9?+9Di(*}x zc+2bAj=ev_S}ltb6NFddH-7MU1hZi=H1diy*qT$B-d=Th!KW7A(@YI*_q3?rd(>}~ z-_$=CR)^$H9Q4}X=RSU#Vy>=fdqNW0-@zSR|KgvJtoCXa$9zJd!sKhH`cjL4uVLy-EdstY^|iuHIYND@ML^tH>Px^x zN;yY;sYSrox#~*+i?ays5opOSf_wTcf_wTcf_vg_O0@{?+3bF)MR1S6k(8nq!9D#J z!95DFoJFvBH|etWeCpI>gSKzx+}5b`wk!@+RvOj=GUsiRKjdpn+vJaUT-rAI6pzc= zCa0~X0wCNCjUF#(IETP5v<>F>thULX#s12Iwh8&Ea~DtWw&gFLP}nxXvv|S)f)-C0 z*fycSQq{qysb{p;*YG($MdGw=<3P8+k;+4ZcE z!vx>nFwUsEZk*x490Z=e1gzc?=x#3kFtdDIcs-rp2G@(NoucUXYtVn2LuHnR!lZSB z*POl@XmdH)4r>nXL28OCu$b*r#=5krht0^tiPyY(1t&edJ`4(Wnc=lD^fPWLH7uhP z&aK-rMx*VCg`1MbZxF_@Pp{99ZSoC1Iu#N_Hgz@SFv?vxFI!y@c$D2LRCgfgdET|= z8Z=*V+nwR>(0>tA6Y%883qGKX0`8ebf9FH;5qSf}F-&gsq8KJjpFp7%SScmLad{G; zAJM4aBV{yDM%eQq*8rHPO%$^|@+vaMaXIwFY5kS? zlKFndOLyQGYP3~*bhBGe94OK~T)Ehoc+KbcZ0rXEAfUZ6`+^%kY~Jc|aAPY4IQoHx z+(D}yr?q}YO*eDR)N;M7OBdsY&yp%+PeLhYEA<5y`$E=oL26tr_svNapcXA zeXm9V8OzNMJO&m|>m`E_0+PYWF2q3p>_w41Axj~kkkuxoi**@*DPZ5EVMVfbv9|6DcENFYsX8Q`vhM5U zAwXS+8_v*RbgaFDN#m4quK>Sct(q?nv%!sx)^a~AT02dCW_T?P5t26EsMKPD$Q%pv z)>IKJP4!ySs?*y(w@qvd+as^TJDV31H9qLG8{`f;j?2VDJdp+Mt7#O$(+sQGq2y|3 z#I|P0uc@bzUm>eS`lq+m{5AB~qP?_J{;Wkp8K%2T^<;r4cjZ|+AOr6o!w*Ux7siGx z)*H-SjSIMzU!k0>$*QS4>^I{&ZYk=vi}okp3B)20udBt;p3t5E4C@Q82p_7oEV4$m zo{l7Me;);<@sZsNORlvS;J+4|9w_=X6!JE`EBSR|S={l=;_fsGX2ICekgD*L3%`Qh z()5=DPX;@;z#OH66UJx6#31g6#*U(T2p+e*uZXw{9OL!vGxr^rupax|K>p*fLf=7|(?NAmF zcYIhdYj@&x@Ro?@KsNhn&FG+gzu+n-hyF|vlbZ~Pz)}p@i+QhiFliuIND}9!qU$;4 zWqO8_NAVwq*(lpUkyTS}P7au7E$Vh&!R?FoI^dN%wjyFa?>7fyfZ0cMdpq+F%!$xhov z9s~9iNud1kn&-Yo@;P;>t)#B8wztMW+|bh5P3l=ahju#nk}WiAf6&3l8zl3r9{b%a zAD_E^l>hAL2B|Wyp$yiJQzlKnmm-CURF!e(@mrZ@rywbVeRp^`A2t6HH;N(UR#a< zZ1dXDR`_}I+HswIWt$UyQ|xN)@ZMb#_Ppo5mg2fdYmKsI2n%5^#++E$)4*qR;ci4M zD|r(Y^ZS0zOJ-E=e1{geqw-o7-GjPxU6};p4>9f&m@)|&)8`Q8nCyN{gMmHRgK~KFW{ynnvsk1K{czTgYo@$~c zf#S~ugaN`?nxyXCmpXk(R3ta z#?#wzWVBiQ;dqNuDGD4&Y$E-jk1#qSr!%b+QydUrRXBHKnx|XvoKJU2dT8%9kF8y{L zLyC__0fcq$$2$WLBM0R;L5Kx(9aqXDOW-xj7Zj>(oDwrG@}+2K4hSB$0xLMZn3`ZO zLfstr;xsbPJOsdEQ-lqKsq(0*cIPCPsyDBe8X{RWye{c#@JNh$HIwbmWe^oqS zCj8j!!?-sGmD9Ty3`NX1^xjg202Q_oii#R?1=5 z%BsL}E%sa5Bd$IBk*3+wKimJr-ZZJGsjjDv9O~9bm@w`$ddaeA1w2225HiZ93{%ITC zb5>bu5+1yQV)+W)`yoN=3TU$A%WsNc@ap6mo?-LiusIu-aOno_J-kYAu%HoQ`9$(b ziS;xVW%i$bI(8plFKD4H2X1p6!K0XH*z0a*vc?=m{jhN6)ksA>vN=9+zoWl@GdW1I zmn7>|M8&@;P0ZE+5ooK!{&mKr06r1@OFDV;n~xme6^XyxhBoZNC*)x&ud;?6Q#R2| z`zub-vGwT)x0=jat%FQN&7dtLV*C(HT3`_nOSUX8j$tNrujt*Uj1)6ZKms%$Ip{ z4CC|}7LS!?Vq)d)8|N6(*M`#M!Plj`&>C`VC5G4NT+UiC%<-JP%3!2k%U!>M{}u14 zt2x)7k+GiD6SzPSnctz0viR{YnD1{_XXbn3k3M0(t5*C~^R0A*|2O7)kZMmu|M~vs z*WCFwdHH*s@52ZGw)qZ-vms})XM9m6yOoLmpU?M#uVm(X=MO(&zJovetLA$rirN1w z>-#*_p3~<0-wwF*{bOGK9_QO54g4$Dw_pWleIv}7)pPq7{`&b|GA=XUuPyzA`Mwd^ zv5@8eLwx=k+9m%h^If6ZbJ~1A@v1xDzvAWZalVI31OJBkW__#4zWZ}7CU>xYe}417 z-oKrF`-J@o^ZcEkoOzxBHh15aw~y`HC%8WIx6QM`8S@$TZC$nJw0Yk42X~$my!<`R zbA>eUFPrBK|Mi#d$IkqHWyvSZ-*1-xRrB|iKmV=sH~-A@*P_~U+WZaP=gyypm%qpP ztAF`_dH#N|_!H*uFov$rglGSo_4fn0Fz`3gQ7g|pe+ku|)8=pTOYZ#Xy!<`R->>%m zFVEi^R1RgDKF0Tqfm{76=5Gx;W`EoK?LG7Sc~pB&o4>^`y7Sk<%irVt_3ZhZ=Fflx zHcVR>KlA?G{JQoxkzp4a_-_^E>^lqTIyzNmOssW}pI8)mhtFa&)}=m+Bm06@qYnW@ z!%oBc8ZSE=wmK&OvDH!{d(|`Ojd2nX>u|q+<(w46R=VFmCcc#T74Elb;CQB0w+0|N z(pp8EZG3^I6q>1-I|=!s^%2`lYU^5Wq9-5459CR)sU)PfbAr*vN{)ML_%xz-%j@O5 zipWZ<2*`g2|10=!=f7F2P$lya-CQ1`2*pFP^Qd$l!hG^2+$oPd=OIikU&5Jl!;@c( zhHyd~>sA3WTm)dvkQa`TIQEFHlR?gxQy1&na&5^PL<4?H4XhtaWW*)w-<1pY!((wi zIE@+Yx9%7XpDRO&F#v8c%OLtqJdWVv(3YB#SGZZ!aAP?yn^eZLf6^f&jjofC6X(@x zLL!cN=Fc;Wl{AdAlCM>wC3RY}c4Ev=a!C7~zG{!Fc7LE<7#C9j(%uiWn=u7&6RvUI z=K%lW#Js^G1o?-HxJGy$e$NWe$Lepgdbj8W-dI>ku!yv{@+$C0;U3Hjuah2$!GTVx zO@>ekm!6%u@KY4&6dwOFh40_x6uyh#{)LMb2cPON1-S*^6z|{C-((B>o)q@aZejO+ zyf6;R8jCTT+*stc)o07doVkrRWs4mp#g2E2z2xJ?7NfkWpe6eDDU8%nBByMf*}D85 z7r3M=&VbKQiwuhlZr5&#yVKinuHWMfCgbO{?IyHu<#N`A3T(s?UH|SsLF=5cY`Bni z{)hu2nW#kspEj1hp6kFIT$?^X6GLWM*=f)+7H$}LDv>if;HkvARxVb{;t{X(3UnWn z-UZB_WRa7$)J*B4rNnf`qJk&)-28@k;J$Lo)G>YSoId1YR+FE4S*XGYf6$IEDc{m#6No;>lm zlb>I)vHqp9+mS}@N}L>lEO0O92y!ch^MRI=BDjr886j`pRWvZvqfdy zRv+%}p6|)4*ygW~#HCE#vqw*y8sWMOnX8T2DhB%3OF4LYJ1pfNt@V1f)^E~mPE#vI z--ca5YrUQTe6e$AFj;yOevp{75b&Hc51f#OFxjfagS@erI3gIb3xMOEU9$e{Z_!fS> z(2l}&fXCpb3=@Qgl+V-Ui9aLNR^VP>k5Mq4PDNJY7W^FT@m}5Rq8*!bPp@9zD^(@l zA5qg*eGZsnJIOlSWS$r5epQ~8cJC3Uc%^R&fewfycpIYqbWiU2VAuhrzc|t^lJ0cia$5xjn$>qci(`NYh z>5eXZFi%_hGRJ>oj`oOuCI%ZlBT41J(+PmDg>#a0UP0t}&ldBD0DfNDoR0p}R6|aj z@|?tS7itwzqUpWGs{W0RuVs{74SSLYeG;v85pjA;uK=^w+AJT+o?D;-2N&Du^YrI| zm;J!YUIDxMT@JjQz@6)J#LkMFCle_ySngv+_xe5i{Pp`(ik8=fcDSt7?n1r6I;K4VcNm)N(Lb+){Nz zv9|P!f;OX@rwPhYHX1&LZ`A!Y4uD%<2U66TCdYJ;c3SIB0)QJ%B*n4BXA|$7@8MZs zPLHF#<$Uwxdvo+S-dlb_@@Q|7w&W+gAf*|z)$9@vfX;fv1qH#l_;K-di0KQM8yTt{ zI&hMBtw7wK7fk1P@0QUrfV$^7J@Gn_nh@Fcr{Zw0Wlb^fhuK?DQmyUk-&i(n`EtgcB34E(8;A`NE!4 zPFSf5s|tEJ9^4k$6|Q@Z8aR~S7OJ~t^s``baN(+>;**8^0nagPUeGmPz;h~KUK;ki zY^0xyyh6pLp}HGJ>ncO`_|@4jv{f&Q35~>CsMEdbH$O1aWItzT&t;eei(%%}SlnmhvP+jE@K5Ph ztrr_f(DL(!nLDBfOs+OM@PW^C5T0hUsRI+Z-JmDm4g$D4lhd#I0!C-RBK(q%37 zBicu|%UPeBLGQu3-(wdsSOBs_`-1zCJ9>5N1`t^{m=)V>!MZ==#Vc5F19#lOYc}F=r8Kp?QCRiZbb*;%2bbBm*O6%se4`HH~|If zsZUAMIvIB%3c8|Oy{6%HZ#q(sFZsiL!W_Ex9%tmhcXVMp_&iEJygl;vectf=c~s<$ zW_Lyt*=Z%S!s4$UP@fhmiq+{Y2-L@gkdp0~n1S^m6D)7rYX>S~>U|JKz!$KLa*+0R zyl92%wuY@5-^8}+B2@0uiK=jSF4*E#~-KufKh zViyk+Wr|?|4|=SDIEJ(b@I7jPLqUza%qWO-kh<)Ofaec^`ahVH(UsL!jn;I}N1)H@ zfqu{XM326bZ@vDbK`-OHmr2ae_gCzPL?|8-@a*8pFnhYdx|jJ;Zm!?bJjWUEL@yMi z+Gk~o1vOhuqvxK*CakN|X~%&RuB>p@e!}wtv`L`NTNS9^JoaWbpZedca#|8nADeUi z(a;FWtvIYFj#KV&*}oxfAaLfEN}*d_JriZsfI_?cZN*m?pi|8xc4>|jAkZcE0<~7z ze$m3x9`7m$FGqo)ZmVn>nhf4Bcbq(oL-7D~P4xQXBM?5xFb>o`NA&t5Bc5a!wkXp1 zlner7RCNK{{0n&pA=wYpJZYETnlu`y+NgWtnZ`~knXARNJ|n=Qs5~vWJy>_Bt+-OJ zPu#wi&ed;|BAhPMi0ri#e0qmaTQ($m9oOKRX{OV2Wpz$HPIf4w_mIt(!9)iIxe7e4L`+K zhtQ0jVvjsm;OCrx=ea=rbMCm5or_yBrcK60Z;3ne1w2%b7Z^Fq8AIuq-_w~$k8q4Q z$-)a;(@FxUd(IsaOK*@-!3Wq!j9Flr?l}~$i?a;#_4<=CG!XStg7Pn#pRZTomg%^R zj=UvK01wKMv%ndb_Y^$r)ZuPO;1GAX4V~0Ba-e4iEBTNX`#dBS`b&Z<8l91~<7U1QC0 z7vb^XXivfnFLOE?wDc0ie5IY)G9bdk%U}tL>bD5jrPm))Y@7p7Tk1CoV^*;R_RDeD zD2P){dhwW@v7-*$7)NT_#uj1Rm^f=jaeC8^lenP28KT^|L2!uMPT23`_{yi+4gopPryJH$g}e$i3Q=ktd=HTk|4=)yCCx1LxmR0^S89 z1V1;vBe=Qo4Z+JPaX)8?+|$0ifybI3gRQvTB0A~GDSwL2OA4%l6-I> zmH+`RE&v>Jr6r1NK?WcuPAAe@6kNJUz%#4X(y4@w64fV~jKCf!9CQdU|1)`)&CU%A{ z!+uI6IT?~F`Rll=wd-1glb+@<2mZ|Z?N1+I4^~FRRAMIvCNfg#;z(f5ew)#%Y&hG9 zHu*3s%A+K&VIYsvyvQ(T?65gVds1gXIS9Fh$~I2VFd};!}j9@LuB5%EOilzOB$+R z<(at$JpcmW@H#SDS&eYALFA}bl>n~_ywVwQ5f@}=fZZUa>hBRnus%`$0sN3$9`SRf zfz6z>q*HZ4H1kPmhF30pzmq3GNBo=P>oZ0#kyg#Fi~66G7I}@FU9QFc%lxr1>2AwZ zO{R?sq=|rpu+(g!Go^Qm=|XO6b@!sK+pAQhWmSE3;l65*h*qO5OW{%+(wbCp({mt5 zFZ!raiVJpnFJfliFdVnPY@_9FCD*6T%o!#%ND0CZhwMJVa}YnR><7_7N`|eMlT8E) z_=7OHqqYORWraOP-7IQKE$vMou!|=05oNatW*&dDi`KCMz8Q4}-emflAVgf{-VUS1 zCSo-^NMs1;gPM>yF4)BSr72}9H{z6Ig%`s!@zNq+*uJBPdn}0ht=FO! zVvdSd{IbIqH@TN`?3?9X&P&UL<^>hq50XP5EX>m;Dv>$%gSN*4r4-#3)CmK+wx_* zAdHL;yOgtw=84cBl)PME&odZu)tXnrbmaur(&nJQ6-G({US^fnb^-o)8gQfTC9p>UukNq((6>}7 zI~e|NnZ1wF#Qj7%`gSuMYdo{`@MMVN3i#D`j;cV#hp2qVtx zmPMRtZLv1RcWP zgv5(;M?Gl}U>FN-C9SQ>*K?j|L>b0{@r3Io7kkxYGr4M}>5)4W9{&G^j;*cx)!6}n zwxfGm>ma9LcEA3z%p9Yx8n(x4w~~Sk2lH%oK4m3wz2KMA0!5bXgc_ypz{e@vqg~?K zmit-iY-XX56F0|?)l)`D1BBG`}SI- zJfluzYukG_S5>;CP$1Ing;z<}hujPyshZ^sIYQNpC<~Q0^tK~>5KOV=8)SSn5)%}y zd^fp+U)Q65UHH)0z$oj^rdw2h(;td{c-JZBN(%2f#ohA$zb0>lTNiTC#jPKGrZ=}P zRI$hU)r0>zemzFs7;9z5v6wcAq6SJI2Rsp3ugiBO`(oa*_r6!_Ck!R0A8rkG|1b6g z%xz~gzf8C;i9?q3Saec)V?o2TKSzJ(aPyV zy6-=71_piLif)_xo2O-h?3Ou#pd7`ESSw{YWlUapDdr$IR_&X)IvQ(@;y*=Q6CNkG z?YTsF>oAU_y{q;ooZov~lj6B=-xl@1C&-pA-`i+kBgIGU8HKv|xrNqt8gzovJ-X37 zzcs79$912Q^5?WwV2(QtziHnzT+QxcuqR~SnnAYHgu8%CW8SJcw}bBI#7$=3 z=iwct;cZRBn|e&@?~SjudzV2JLe@+0hC%B!Hk#_Z->xV$t!UA37(Ha`(IO<}vx^F? zZx0`+;+XG;%wMa-8a)rbJc3_&zQTsDlMPg^^#n@QB$!ZoIfWiKKTRQx$ zj~qP4cf+4a5?9+rU+gQW1}s;rxZR-E@7}4^(xeq5U}gF$!Y>u`aTLIhXHeK8&tD;P z{{O-j*;bk@mS#>=cUg;$V@@7fFXW+W1UH7wN~L~fByOjXroU6)7i~ngE_cVyVCWm& z#mo7Un@$UOL6-R);hy#8*R*HlqqP;a6T*jJtWXggwSSZiV?G-Rj)4?E5wb=Uv2QD& z9-r=Xdy$M98e1|lZV~f_;zTco;`XWHgc~@u{{{U|!jiKnaG7=vBz74(T@wbOt99CuY!!~3?;B4$sNM%mYK+gE z;1jbomE58aFGXpnsp^}88Ac$NsKm=dftm+|NQ=Kgrsib?X=B0Zi^0I zEaBtOBFl8J(k5a@?5x2MNz32Q^O4UZ!&8_m`)89e0P7okf8s z>O9-Q0DDLG-$%YI_h`p;P(~PgjrskTAhgpOSr_%+!kuB`N8|gjN;|(E$Sfs6c!isx z3e4{>mU|_sz&B3SI1FQ{_lb3Ylj0rK&sBpa+&~UmeXzzT8UQ8l%>H))!hTR-upShT zR-&(UzIj{4QYqhb=9fs+DiQ7u99sWbEhE)-c6arIwz& z=inY^en0sV!%c&ehx&*wn(#9Fu0cqmYY*iy6RLBblY7mnb5;#bq^{wX^&YED(jLzC zud6+@n#!M}ojxPFsrJ}HXv*vyag{3R-@Sj}AFO>{=`%@x>@G@NYpC`qkXjzR1CZoj z%Y%1yy;XT{*0VEtvlh(e_c>wvGZ%bHD>aCPXb$KOVZ}>!6pEJtQC5qHC%GE>MP=Wz4jl$spGyd1iz`Ux4R!r0>6Lf)Gtj3Laz@!W`-w?>n zX$o1@g$nFe0VV1@V+hEdFAZIEP_)U24{0=HuNXQ0E3tEOEG?J>L+O(2AQ$0_r zX?EU~q#B>0ikegA&0i5XqhEcj(t9+~Lfd1BIlSa$=K zGDp1zEC_gw&a4%(ps1#5Ol6ZIoHRLUI{iN+$22=D2xJeAC5K3;JKYY7#2h&LLv{Y( zy6PLg_@MF_@5*6W$a>dUzR?*NNgl?${llM<8Qqi*%AARJlK0_#d>hM~oPmMl;XZtK z@O}H1oa7-AFF48v3S|W6F_yvPXBlB@c`mR1Cg8~D1+nBUjlty6?6CElEWR;YrtscF z|JoM$GCT3AnK(=Mklr?vI9;5Cm=y8pcX_NDO?9;OCf?mCPp~F*laTfREJrW=RQr|d zuTws(WdAbF9-lGI$}1Q3PmIIGu*b2v_yEGqsMEjgm|)y#?dtL6Q#z5%E<`0_P;SV0 zcEruaThU<1@C6SZm}Z4oyRjHA=HvXLADXFn@}cXJJNimwfbGbu@paY7J-O4Yi8oIb zrOUHqi;{Ftnr7AATq7OsKY(6kL}2(ChSY^tW_eaZB^sPp4}ss#NifI9kHTchfm9Aw zQpJE-ygJKAz}8fMW$}rv&%cZ9G1JKoK7&y~oB!3rr*!T(Za;d$^2Ey73Ca^YWt4a5 z>3>ijXTwjTH~Gezy%-s}y*>w}74s@*$829Luer~g=RRcs%^bjs#NZ{3k) z>1!;Uh_Uz8_f^ESoUfN_zZGP_Ffv~0wUkz!&qSgW=ebuyQFaiz3IrfiKcCfV%@MhlD znJYc&M{2odAGwW{TPdzligQMObO^jff5H^!yZ&QZ+9#gm%-c7fWUQQDtlbzY2Y^B2 z*+>Q?$J(4cHaPj=*?yiG#!AHgFRNmio=qsBN4X273P0_VBh-tY0kbn=ag4Mj)dzkw zY`qb+mq`5;&LC0C8FVHRSk*4$g%LMF!wv*X4up-X-(V8w-OTr9QTXz+{w2+l*4PV? zc`50oTI!TbI6xF6*Ok;4&_c~K%^Pg#N4~gmbzTQZ}}Is>T(zIw0@eq zm`6m6B*u>z#-mNB`G@?kTZv}?i~~4+=gw$^LF6!aq7;;vpnglGZ#1~bHgzwS-h^yh z`dW{RIHIodo$cPYl;(2~sXC+dn<6z*$9CrJ`!YD~JKLR1g7_LK9ru=B5>BqEJx_5y z*$3Z}ysF#rUu~j{g22sD1A_u!R1W$QcPUWP73-p{gejp;UJaUwSQnh%f0=w+P9YDP z2n`j1Qldbm$|4mO_?)_Iohs1=tUVfyc!U5;fzh)A+H=6DH2#~;mm@$s)_8VMnMmRg z2Xh5UK&`O;7D>L3*6v4OaJ-#Wg#k)-mq5T^CDGXVQWDGPo_7cf&Es;LNE1{%_#Mci&GdU7Jj3*m) zda`I3!51t#Dos)ESU?@3R}+%-m&wtoJET+hUR?FV1T&tHUYlSic9C_o!VF_UC%X_G zVrdWFwxhc|yNp$vWy4SR=97=%6Qnj?$is5w!8a{u2!XXv$gi)4<@ZT>GwcR=Ov83h z2&+nJ<}lCZ2T9@cZ$YCBrhb+D1VyoZ{F?^}^P!ruN`CNBLE?!)RI8V7OCBD;y!KHV zVYq)uNP{`p@oze~Rkxd|v^``k$s>uaU{^Qmq;bMSJ2LppPoxJVu&!~zT`3KkmSJ79 zi{UyIJ5jM5#gU}?Dny}C@=T|s zU}G7riWuWNSh{0>V>a5V-{nNtUxC-`Xl6nv6w>3{4+v#=rjI5+3O9mEXD~8!AKj$- z7ym+s6|Ri98kvv`G7UsmZjm%F%sm;F^ho7?DB@HCJX8x9k2WW^a%!Fo7Jh85O#>We zRj`-Ha4(G5-`ZDU-_sF!AsrblIbt}EGw#s~R8i5}6lHD7qXn63hLZ^&n5I0O^B((D zX(1L3tGI2~Vo(cPt`(J|D{ku)3WVS{Y&^TVx~Ndv{-pE?SuSAqlpD_$-2ujvJY2WY zNc=`bM%H`ne-Ob_rJ_CD$EmR$!F1;ulv2fnDCAE}i2n4ndP406H7`c28?EW_{6B~= zr*fmDPVOvZh@Fv3>2y;zDI$0C*siE9emuoTtSyn`p~CS_o)v+7Tn+hSPKUH|Ip7+^_@!(5dHC6gCZC#hcY zz_I5Kg8TNBWzPRS!eJVa5CE{C&)r3Mce%jFp~!wFvq0kZ!TDp*s?&L_I+X{PMi*?` zagu5tu8ZKzTHwrHjKn|7iaml~Tmhhlr$E4SJ+@?z;M4e9pp6D1^#fT$iS=q{tDLKv z?=@8MhUaDeR+za^TB}3G#8zcvM{Je!Xw>>R*g3FBF^PRWXkIMD<*pi%_$F{ZjC7vqUW4fOemdMN7)#ltt|b9a4RaGVjnd=tr2`8ug5+P zETV-0@!+KK$yR_cJp})IOpoLE_xN5|!ip98PP*u@JN>^UL;yCvg3HPk_OwwEe+zfX z1EG0COefq(f(L#hK%@S1%(T{Z4hS}Vkd2Dbi{hj^7+Q7i+}3yOaI#uLb)V)k!M|fBm@4=Lz;t-S$r6dpT~D-APeqDJwPC?(iTs zi2JpLsCP~n1V-ciS=V-|56(|V8e1v`)RfLa{6CNt2!~% zuZv5*o6Sie_XVp?4k$9gVcWZ5%XJ5_tj<$u)Rx7x?wj> zJ*z03vGcQQL}X+oCW~#C7Ll}aU@#80Kt1#2+43W)LH?PF$JC6%IP59w%`(SMp9;n| z6e#;JYi9E3wSh*5LBdY3?^XL~dx^xV&ULasd|XJdohe0M)x8gwee>ThMs1&UC9)T1 zNSCW(;%fvlC~F>V*B=?i!?I=Y%Ca7mSwTM(nDFHa3boiwP_N?y^ZGWmXCnwTrSEUs zsOh|85^Mi7cc4s;Mbjl|WnHdM(c{Eal`|n-(NYtj-xyZLb#kHU1i*(x2LM4+;MY75 zqTC(j2-S2FQ-x=+n#CGp8%(0ek?b`BluT$Rdl%OSS#i`hK$6DSNY&ic6K7@@btjEF zV+MRI#P2X~uaPO(c{=tAByrru8D4I*vLgy(C$)Kf)>XHAE828Wk|8O@pymBgs$&O7 z=P2MXMY-J3O7P15MdR@yy5>kLYzd)gvGh9lmoL`Wo(90>5PfSL_a;XW43Cix*eDAd- zF`2IN;tL4e#=Cp;KUJ$0curk`YPFSc0jVXCN3oK=C%=$xRhJ8mvp%FDm3fGf9KlM~ zKGhzrgsi3kk~2FpO76a9Sj`B;W2alMaQmoJZXdB{kZB&toH-$NnlqC|Ns!=2#92Km z1QOtQapmc7a8n73oicQ@c#5zc$z)~*$rNuoD(L8qlvC%IOk7xJC?yffEl}qbLX<_- z%gO%PQZ-@l7^sR+T`rg`UpOO_2fVX++e@uvF*EyLFb&G+C^6X(B9X7xLl3bd%7=7L zPwJ<#)6Yc7Kb$ODOB7mJO9E1`wPX~J)Tkc(Nz`hPsw39ssP%-Tg%Qzd6Oz_zIQJZ+ zKD0B^{qH1pKn)-abhz{~T#efX*X8xiJWEzFF|o33H(7Lw12q5TpG)&mwu`SBPBuj- zK1iYU-JRw%cdzg@7yg!{BItrlNYXT!U?-_Cp1J3N;Lez;Djq^AggiH<$%CQ`g#=#Z zOgzu0XU--)M|?9!nWNR1&b}BWHEA3TQN3@ghQqW;H$-i(Q&3M*9VMP|boG_WAq#>L zR@R0N)fvz9pA25}xzGEYpg$Fy_8M1(uI_J2sP#<$fQnUUYb}vM)8f2-Mq-*K2{H}L z%Dz$m6Ed|>SC?sJ`V%sxLVefBe1i0$p|dxV+?9(PlW67>GP4*;c>qX(v|;qL0>den zC8biYsOaMnF8g}hkx9nYCG`XWeSDVG3wbc+4^*p=*IMN}1|s~sJyOnyT6QY=Qh3RM zsxvfZ4|q&tw#uM=&M*?Tqgtjxsh{6RriU0VN95SG;A!7Ba$6nNZ>v@Ju<-gUZdTm_ z&F!nI+@{5vDd`Y~3Q)V7Xj**;P`!i0T3)4xOq>hYis)F1S0GsRiZu?y04oI!Hk~tR zgD^Y;ACWS#d4xU*BpeD|1_Rq5L!`((qb`epd#)qd)YOLB7ix|Oa|V{CiCilc;|6J3 z#Im5iq`OHzidCWaR?#~vtgQ3r>XllMP5|Z6QX`f%WFnhRjmV!N6Qd+NVen2Oj6W`vj| z@#cc{nDi;lkd9=0n;=R^mNs}K>Dd~~0 zWx=j_H?!W6X4V|?a{`{5jGfwx=nJf=s^=A=G|I1Lh1HUxH;OZM3qd_^6ldj;O3bfl z^v#r&X=Z_JM)e9N1tAkRjcBWf!9gSXHv8l(k5`GIC!uCHoc^|l0Z0*TKXcgwy*jrP z+aQo{>0;F}gXoyXrRY9@ywZkr<&}%oHpg2Tao7YX!XnRpL?M)uUG`Vz z^P_^!)LcZUzABq8SMWvs9cf5Ms~((l4hJCxZs@0)_LKsN>BQ0_^ zjAq_5nLA}sx-&pxuCC?UaXAdO5+mf>sSJo%>BybJ8SO4U;Qr$7^xMO{p+cSsv6@WM z_^d*i6vj#f{=41#iDVyUEn(4zS!GkzY8h0``qdAmSr~uU2@qGS6atm(d)@bl*K{Z|wyLZ6 zLEN8S)GRjxrTrwa?-{sCppx$u>bpRxN6Gh6z7f5k6R_JI!8_H3;ymQ(Y{n) z(KnJ=u}=){DQGh&DV^_W(e+ZJA+WmOul=+rd+?<|bN?n#JuQkFT|qllkZ56a1-+tz zM9HEnXtfFw9g41?-x4H>61&~ORAf3&%gD%Q+i5&KOpaFG4ko|j=AEwNc1cpXhH2N- z&;U`@pL>-P{Tl&`0t~QuaI1O2BEeoU1d`l?8uLAq?OA4&8DUK*Y7}iSb7(7PZ~kMl z&(1=dz$MXD6kth-R&a6x^4p_Hak4xlD`Q_jAs)R`Fh43;YD zROR=>AV}Htx#v6Az-O+DAMz_vpw^Z7iR@3*t{|Fui5Xvq4YZB1Pt&7e%N8(x$hV3k z3g6nZr7k0cUxfW8o<-Rqh<<3q|0cSKR3LRp2LLbgT`_Ey5VpZVRPb0yVVnDb)l3B z1JA?ac$ei$U6hq!XbCU9Av|^hTGETJjf@*-Bmz>dPFs(Sjb#0uOXN~ietpGbn2xFs z|J-!uEM6;3CY6*R;>!tBsaUkoK88H;TDM7!kecjvT>41@cc@G%P$2N^T&|eb5^nPO zn!_uuZw~))LUZ`3QO)6}ae|qP6}5-jXpB7}kL~6|FY?N{97lG>f`jtT!IZqGcyA6r z)2}()z;h*k&+^xp-yD99=PLf5_fcBsMlZATGcwdytggRvjcV6g+sx~ZoU0;VsK2vG zMWT{1XT{o61o9KLbEjflj%#O&q}FH`wQuKwv2u4!ps!iI1)CH1(Q(n{#Qi)bG$&?B zH)^!5S5CC+pO{0C?ssP{uhR92YDuQA1*{d~$8`rbf^=;gb8qJrl60{Yv2TJWnY zMb+B})U5GWUD%xX0p&2E*T~ab2fTuMjbR^3L%^Lls}-tbZb=UoiYvpSYLzVDiHP;%D$m{Zf(w{EINDhFZmaF zKg3#HRd(E5D>)b-)Kot1Y>KbTXUO;+ZOZgyqD4(@;@^;+)CeC-T*(v(@@#;ZX#6YEHJ&839goBa3~h(M%WoYCoX-!&6w*IMW_22Iaoo z6(6;qmG-$Al#OK-@HVy=k9hg?1V=P7>1g}6a$CxD|CXu#ReFt@?e4wb;5-pibx}IY zYDFE`n)I@hx8KQ&_z#6{|M(>9V@yX_70-wmG5OJ8Op{90M*I{OWo&;2Et_|EAae`*r)T`e)nE`QqqFjmBf^(631DG(vs%OIKI}yL$py zM~54YhpvEtwBOHa0-Vc?7kqd^M&m#1%=HIrJM~yiBNp4B;t;Z;)vj3W39{FbhSJvVdb%Bku=iXqe_`3U%;Q(Sr7l`ZOKED8*^Zy6nuxSC7_0yUEdM9Q51E{i$1qC2H;AC}y^BC}bK__MZ55UR5=tvsX zPBdm2M%_3;xDpB~_(`=g6CGPU{` z3uFlm+4mI4E#|(#PK+Nzl&{hQvyttV9+)>`-oUI>J1};){|(}d3=ry!UC)9@yQswo-9|-!FV8IhSp4n9g{CgURcCl?j2c2Rp;L3?0Yi<{^ zzCqN9up^=Y3TS|;F8}WWlU_0PQd!!)K!B5dyKu7di)-C(YmJB7{uWf% zTG26Rd5Jaj&&&_{;#^~a+@kK)7k`3R`GUR}@jrv=@AbtEf2UTDXIXo{}}_>R~>ADyTpJdiF( zgY+*TMG&Lc0#eB8-5>oJld;AE*)Mis$(X+bhKHMvBcu~sdkZvq&Z?G%so+W-Jl`( z@COw%euUr*@2YQHDYcw#;6+tegf?=hrA7nTTLVJ1xHz~s zQvpG`-qG#Xkn1@8(AvE+9{T)fl$@2yaa=;KKZ|7=UyY1XyjC_gSiY1{CoaNvzJ{x> zvH-8sdF|1E2`MN(vxuQk_p?Y5ki?z=D3k>Gs+!EVl!1>3-Xwu{W$bn9b#3Zgso0_J z-yr2Hc?&2a3Vj+9Bjn|u;J4n6|J5%kKDrjzkfo3z-Z(@ss;bCXxiBsucUO{C07Jso^%WobC!r=(1KlD#^dE zlMhz$>y4G4q+@F&HcD*!Iy$}Ph;l-5s0E=4j#4_P_U+jo4^bh6*r0(Sa07%SIDoncK}m>f7P zIB#&>_FheQe|3$t+Ng7>i!>95`K3W3uIlQ#8ZXI<=_DD_s9s5?cu9VlPLf%3BwLTH z*KYT6l_Yk)sw7MLwpR&fspzWjsp#yQBU!0(_1dTANT1#*Kc1k*>2ejFQ*$Jzcl1^r zeU^&OtvQn0JNjv&Wx{rDHWDq}9cyOl&ev#bcH)d3q)jAriZtG4AjFHm*BkOx57B1# z+q%|K@#A`C)!h>N4IO(XW)gZqvkKc~KDUtAVwAAF3EAS_JX0TPKP-ww9I=2WJp>zy zo{79Beb(F(S95@(n&S^J2Rf&*p8d2u~9VE>Y!- zH|3}UI&>se@%X*@{;5(O)|KuO8^cE3H|3k@A@NEdb~tbLxA20rMl7MIHQs${x=N%f za{_WWUMT5N2b9ESE;jpv_LmM~Ir0U_bZ7f50M}9@T2RssePm}ZlI-#ONBOWXx-rA5 zmuTd5F7iN5!S+`@)9wv`p0=;R_Q(% zPah=dgLV!n7fBxs-D1@*BZcl|UP!w{wF|2}?#^5JW@&j-o_6+~WAtz$K{o1MK83+* zAOdmfr{wF&?{J$Vb#V`QXy>}xot-ev*4CQUr%5;Zs?HCU%wN<51hJhVYZI5KgC(tV zip%Z19|cRcRDBe@ZOfY9j66HJ=SwNB1L>5_bt*ThOgZ8XUBZ5Cxp1o>jGR#fg& zXVa|bIW&-tlab{@jyefogr#pn)?KDzS-dK&V2HUI`x5KHneqF~E2{IrsFpxTx-*pv zy-diE%Ve)Z(~3gVcw%yolJYp$;cYT+W~Ipqs54z&?a5f)yYz*^OX%m@r;$wxdX)U# zGopRG&>i%>ttIs;%MvM$3ph*F;|U3r_H(**UZ*&@v4<7mxUP01@7SlWeOCe{k_WBY zQ@cq5hB8_b(05bS?HpK0Sw0*%mRwx*?dC))rv|=hEs0G$v7T-{`7$rfi6$?2oeH)V zZQx1gEhI0bN-_!W@aat|bg>SVJQDggp<(MorJ@wykcHI=BXOl-Z`9NWAyt1kg9@Ou zs+X*U0A+agmQ*cn$G64p*Z>tn7F7qR`>q$PAmQ7%MVYiw$;60G?HWPdixLul?`hru zw*&(8v#%vEN*-RI(g&Xa=~`rx7Dev(;Y>Ra!e?ACtNOOJ*)rJw#!8DeoK%jyAI*vf zrf{n6JeYq5#bA1waIBFM{(ZtJS6aicK6IIGZjJXTXGCW532Al)L{5zW#kUV+xZ{Vj zjYoyQh&MBd6^dIw98Mv^hi-Ic_sy{m4c!t{_!-=`gUeI`ZWwsOb|kOd`L@3^xGh!g zgfe)#+{{~Faa)tX7pd)_4*$I+!Oo3b!jn?c{BLJcU3%KKbF5R^Z`(&9|JH4LjODMH zw{2Ao(?{Dg-as9pI!CF3V8-T9-&K7n&$xO^8p>;i6>p`t`tOHx#xL9pITBrV*t&0o z=|o0=_6556btZl3b-Eoe={M;B^iBv zOnsdjmtiSkEp^}k9SE~Z;_g`$sQ*~?-nJdKnu%W9L1!5*XX5Fd+xA$C@^}w9p?rXF z1Qutuzq7LmzY#1O%D0!;EDaE$FFDB2Q!ri5@3xPyi`OCc`XM?#*C|)Cn^U>Y_MwCT ze!XPWqpR*SppPOU&cKEGy1*iZN=_D^!9qJBz@TfQmPQXw_cE_kqq}A8gVmJNc<6Oz z0D_~swX4U65FoWd#Lw1L-Gk&H^b)$j#Jin+zFe2)rXC4PT4(=7t4Ac7Anv&CT%jLJ z^<$xa)ab`u`Y}~MCg?{%KZff^p?>7+hfhED0lRnw)sHr5i5^JoMqXUp)N}pu;I*T* zQM~un*Y#Jafwx4BeC!=^%9zR2yGkf>@(F2h22Vk-j8t{kg|Qk2$Y-BvtUMT)_smEs zCs1FEat&lEi2F%mCnGMA`9^@w+; zLL;M2UocY$Ov{$i7B$wGXeW=_xG$u*8a}kaOoj8kQ`wh9d{6@sH6-^=S(%#S>1vRkGM$P45p@FC!e}y`(2t__aO+_0Zdofs zHfC~?LA|2lSR|;|RQ%l$8?0@WG{K?!g0(v&0B<`X3qudwHi@r0D(YDcUUk+wk1O;T zwT42f#d5On%kG7+*RaB8>4_{P!y6ShcoVC_l?S9*dKDZ_0Ju;pe-1ZS_-iM9lpF}GU z2*q1(R=$pcujzkBle4vBsg|i#_eZ5Ftd=MtVplo?S19V`3|frgheEG->&78b=Z8b$ zYovVN+&jFAZju#nI6({@?7>kaY8R!~BRtK~5`it~2MKfwasL#ld6H@QbEhD?DS0pUY}8^St_xC^52UN&GegK%CetTk)Aj{f;oQ`> zRg+>pY3Vk^RV?=k;pK4u;YkX+1S+)Pr7>Wod@)T&a;{?NNLTdy zE-mxsw}h}X_}ude=^B`svgArn!0aWDekOBJcXYsK)WLs|(!?u903+aLVTij{A$xR4 zR9vJJL)L!x(KC;AY6EZF70@+*qyW*?uL0o{c~N$J+&}P%Ie*N`{T@al=v;qHsjhZs zb?1{JB#ZGbOk;hm3%SQSp|5ssbG_BWw0~HLSs*K!o`%03pr)aR12PTUU*V=~S8GPm zn%4-8uaQ~nYb@mbIT8ICp;j*ujijL`ZscW{Ec}8-z8>uA?SwuyU~VM9WDj}6^U|9%JwKt$S#&cGQ6pHGjV3VeW|@jM$bKG|1l;& zufqP5!n$*Mnd}L}EVaVbZ&9t=w$q~nRbT4d_Mz2KLt*x4YfU{*XX53G1yd-s%~<|+ z)Sj7-)sc7HZ4+fqZcxY|%gm+d8;QLA=ZeLPE5;nW*vk5%Kl&NYE?I0eZ(fnuCAPYo zVqX#Mv0am;g_^Fu&U-g~Y=3PZO>hz`07jgN1QqeN6>u7C6w0taLNuN-+zM>aQfU7k ztbA$;J+M$^j~3zSv8c#&7D;hE3(+Njeliuq+|A2k-m}SkHf)y`;co5)v$A7t0SM;) zZVaG`KE38|PLdlV*6wycbCD>zBvrRxP8GT|MrBEd~ivi8$CL4%&G|%5}+Cdh?GFoRQ?#lwOAN8A{uS{nZ!XwYcQt z>fNY46&7#Az6=I=o3r})zTF7VrsD>c5);~|M7I6_m0cypF-v@3)*Y88h<^qMeZ~ zx5MZCSdwD*hah*d)a#5n=S~&9OrlqSzC=rqTcV@S*U^?ldmdOWl;|^cbeWF+zC?>& zF}Y2NKEinng%|1Qt0eji9es^NzeTjI_gu9bM3~u2fU51U*?nxIBw00}B&pQi6^mqy zO-{iC#hAU{S3rNlW7QDdrVn{{>nK;`FURZ44KXXlzHk#gC!1AHb>Ks+Ijz;XG9MOE z0;YLnA0RjXLEGkt)eQ25(o!}#hcfL*u4(6eY+F7hTxbzZ+61OBN~>`=bEG;q_*?-4 zmde+}DY)%j+}}w^*vf4Q9VrkA8qeY0)AXKG75w--?QAwnVr`MijaNI*6c2%N#4Npx za->pP0#rh7&>yQimx4@G+?=c$n30QlZM@RSyUTR0W7)^6^@x=V&C2`tnJ~WAl^qvH8@;2FqwbD=;j|X36zkoA31h!Y(Mc5PAXQCL)sYCz=yWT~@N$KcEyy!YFdbo;aWz*63tLUoRB&VsO2BxEK)=^hW)KsCK zwJlR2vO3>b9a+qwfZ0gVYJhOfA5Y)Pz{9}$jWt|o<5}$J!pMs@AZq$2kX64zacSfvZbFW6~&c2*^ISveB zvZeAhx}?v0tSu%spK3~TeO0Fl0k7^CsXS=SZ;(PEE+yMghKhG)&VH3ky|FQhP^(o~ z&d+X^!M4AAmjdQ2bMzFhbBM20-Ad*QK=qg}l!FoCUlJIypHSu39u>fi1#wAWEDJ$lWn}+KT`qeW#;2ybhUWxCtnSh8OZz!`I{Vb$BUIYTidD$oaFne!y!DuN=;#IVXU0PXQk5P3Wr(7sfZ-Ygm^& z*-3yP1RTTlqfkHcd1xx34C7-LfB*psWer;yW?EWk86&S?gLgz~i za#nRaLv>W)inMIhWwKUu&b?HYZ|A%cO6bbZ=~~v;I4;ayA>&5h`P{xF$LDl~Q|*uK z5S-^?R(Dm!!o#Y5eB6hrG>MGG8zN!N|5` z(KyMW#-{o&u$j{382HB!<|}LjW#G{Ez0#7C{^ISRPaj|EGC*dAWB&3+Gk)xp85fzx zulCS1r%>b5W0b%I=p>LkEuB1&JAU641tMZj=gXBkp$2s^> z!^eTlvo3-@OAuSvFEu@MhN9`JG0wySTpk?ri1oq(Fyg~F>kv1^|T03qu=DwXbx zqBE?i-P$@k@^hk}RvkS2lIq*B810$7uI6_VOQ>q%7 z`U9%+`OS~5mNLOpU+TZ)O>ii+l#yd9N!9LU71Dz2O{_*@f=DhoTpF@E+P{VHknpE^ zgrCKURY(W_tUK7KyMQqFy(r~4WBPqh9wXy7v7&#Kx?m)nn?c*Bbo7x*6`jFj6-JLF z`ZM0$pAh{ydLG|9IRW*mScZx`f{%)NYtrLZY_(iSh+$59DfxY=0z3S8eNxd>Z6+wY}2G`_~?JPwxt`teJ{<-Wq{syyrUZP?b_ zzYS^4q@{jD)9Wxi)h6u2yu3}^MCWTU79_^9D%Vt9ELH|Ls>WsoNV72NlydowrP#@m zf>$uDA83$e`h#}CPc&BAqPV#$x9>QLj`3%5zsHEnFBt;j#=63uoy-r`z9?)*MdkZt zjPk7!JCw{-gU*uJ)P6rv$TO9GPHRnR5`OV7(xEm6%2-qFP(Ai7@`|`au+8N%OT-@E z5wTCFASnX)aVfI)67WTAz_k>hK*N;$ENk|Y?O#=;=*D6Yb5jP#HFtl#bCXdgXK2Qn zO>1TL7@^J1h`vsw(|T>&NAcZ$|3Qt}SUiE!1Pv#S;j0##bny*6eZMn-4l!GpKw}Xqt@<5BFhj1M!VLLgMBc~j*U?{*XgRYc+9%Q1 z>S%ka%AFe5uAIej(%C^e*c?9uh6+iOYVV0f1cm2-Mg4HA#1((zFcHN9l7g+ z0mt;}&w9T!z3#LA%1Xjxs(wu1!K7=V1UdG+nom@J88(zK-0y{?tQRZr6f#U6H$$-=@aA8y@WZf?%@*R<8!zmn!qwWT7(T! zv9d~iz+Ll+@Bl{LQ)E)BhA>0B-R6sB#U@#2>h|9IO=9K9`U&K(>`muJoN;VTPgXnA z0_h*_zxCRV4%ORHm! zhIqH#AdPi9I4V*1;sog)5pln?bL%^D7_vq>*R3Padfjt{EJM_Tiv&elpuJ$wV+`!7 zcKQSq*+`IkG1rT=?~$cr}7=2vlO}fBQAF)+Ki2sxTWs9x#jhFf=ySR#-N@3P91xL(GHm1m(b zB)j1cv|wm>1ynyLlH8jqG8itGvJ$-S=NkWc{hPxZF81bbeZ@1@rutZe$jS5TC#_7j z7t~igTOV$cJL5_3&iFcYXPg~9m#9xueZD`~dHqyICLa)#Iql?*%yz+54fkKUKkuc; zX=E^bscMKpRY7xjx#0V9uZz4iRd20@t>|i*Pz-5V4lRpxiBhTx1av=)`#^uL7p!%3 zn6)znJI{=-H(Ab@f0n={|@9qksWxv`emvg7ELQt*x zrZqjkBqjZz;*?szW7V~KQlBn_{hPYd6a=5>Lqhktt}2yE zQg<}bJ>(x!pVnu?1ocHFmsFjPwyJdr*ESbQtDt#jD36?-h!$cex5VoSm6-)!l%3w3 ziy~WEp4U~LoZDfM`>e}bUq6W(y%5&GMMV>w2%CQ1gc3;6?t8A(+oU*6Wy4=2OG!=+a3ImL|O?}e8zVrbfBWg-wYhtl~0m(crXgRvvdq z4D{Ub8j=yhCuaPX)_pLa&cwbqh`DP2IzeJ+B^FVG$zxdxovmY>+8q!_*;WkGvjd+B zBIwnhOF4*r$_U1Hacy*iKfdE=yotS)KH{^&h)3)4Z@n2H;IlP(wOZWa@DFD4mc|UJ zH?OZ%@l)_4-Hn2??GNUV!mgn3Jjam!u_~5AMb;J|y_3ajLqOu^w9Ol@wZ5>iYK2R~ zR&03KnlmD7-7+fTB)&#sY%T7K;Q8V@UY&(C6du9Zp#GBC!q@A31#341PvWcc&&bCb zP5*vH)^Nt)JTq!M5mBe6hViYi5<4WXe;okChb+EFa705A$%ubEy@=N?MchTlnHt(1S@D=$y`aV#5Z!gHcIl!Nv%{$4rTi^ z{w|rF4oT$%3u&IRm+AzE^O~!QoP&9%kDynh%#v4(2d?ZR)y!#&SaSg68DDjO0SEWq zOevpSqn^_iuO6b6hMVZfVG(OeZm=aGbYA{7evcnXbwPR59-kXTy@$FZ&Jtyk#+uR^ zKh$S-j#4DR7|o$<-c`wc$5_c9Okz6-qP zAoV;DzO*ocg9&PkT^y+lj}mt!Lz8Ap6ST;)+^+Y7N)Uodr9Ejl-u_C~ReuItcB+)9Utvp)j=*ryNA6|%J!^PVDr1E|7+<5hCU){Ne+;7vAGxQ04MsJOuM6et zj4vtPlY|aR4F&DbH7t6#od^FnF{!3 z(5jmj$P$yfK^a~BY5@HQ2r@;L@IOV6 z!5Xl2ZomWVOT7Ra7(~q!z;MaP+kEvV+rh*_{W^%(pXyhr%M=vE=d}8&E|o2QeAM@< z&TsK)g51Sg6}+GVthW_+)vueo;y$1+mMfEZ&>uBjsP-rA>(xc0fy8%GpK=InslyeA9TmmCzie zy=UD}fEkp9@um*bzAR$xizHnJBqvH*q^nu^5##ZF80*Nvb{NerpcqWM&CWJUHr@S_ zS+XUT7w-tfa$3rZg!cC4kI|y2{|`dr)kW+DYvt`&fw5pFFZTFCC#%@BPp7_DVXYiXaU0wjk#$@lvnZfY4-Tjto z=C?GUegRa57(g?nna_`u_c5h9dgs+dKcJ&WOFJIb(O=fl>m@p_qtBP;9GdqH515UT;p@^mE~}v&(q2pA8aqAxI5{`#Lv=?C}FZ z>#(&cxMh#{xv6~*B=IFS-Zu-xG3q`O7(4?)AM+jsX`{}p+=`NeGtP?Im%>VL!aq1- zY>pa_&nOrLcZ|jO)Hk9fpWJf}!*MCL`3oZ0wO8hItAQ9N!h;zRNmZaa;uPHxD#+^! zabFX$-i~bhFkJFB(#(4=4AyQEc!RYlqH({&&t;h#28zm8=laOD_o72F9)5Fy7DA@_ zg{+$ghKo0btv7@5!*gd825S%3ko%r%L)Mm%J#e1nMXa9Z4-RF5%_vm*>hFg7wt|%l zT#>)X?pB)|1shgY2vUrk&SRB2uX6ftgC@HVU8<0!Tt`PF`Y_diOHtn49}wNu-QDxC zYkbtj(|26CQin=T*g6Q-md&j+m&;;`Ij-U~0?g36Oa)=_gHj z{1VmDzv$?89;?pM(Fb^U6GV5(M?85&XVodvKzp=`O&eR%QiHBW$o%NO-(0(Q8HIY% z>Lw9*{X>a0^6LNyal+GN0)0A8jvM*fp&xBLxc0HAk*Az@ELcUYV)~8sWVQ0{h|_xh z8ROe9hs_KVub1zWV5`LE3;wOu@%z})rsGRC;a*wavk>{SNAFiFvt_;)bo#@18Dv3< zAEvyL%|>*y+R+(NoEa8xmH8W=-LNp7_?Z8&=%&Pv<;UETO==%VN-jQ1C-smZJL52S z{j#*BBh#2a0`OXtS9jSgs=eq?^h$QHaweKcq=sCF_%~Y4GX(XJH?dLTLac!bu>oZb zJ||`9mgryZgbzF!XJJy(cxO;%BzdGT;(v+YL4!lqw$RY+oYx`X7##9{5-R=#;a!EO zs2?kg#5emR{>>yDaaq`UEj;v~n8ZpR9UR6jSn+O=hlH&^2Z#PS3_>J7BY1DPcrOWX z#5D}-x}Q>J+-c!Sg?Lk=teV9GrH*7@SuBiNUY)hSTqA9Cp zMdd;HlyQ?!vvPY&oiZ0JUumGX2a`ttdV8pNJ3vP(w~uWJEm9xQ3$AbfGu? zbAHNkDQ+#J9B~?<7Q{O%6cPRqKq@f1Sts6T<8xN~IJo9btZxqI$vKuWe;hCKa)R}K zJG|Nnh@Z^ZP+VAw*U20Z+gcG`B&toWc86;;l5+Ojq<5KWuD=K$_Bt>7Xs7wj6TofMqzI=ZJbdrMr5(>ub3a;kO7hL0E%=_W` z_k#!iLg7`Jyq0I&QQ{w0f5#PmcB~+6uydWPGF&YwnbQ_~)Fh3`@oM5`Fe+6Z@Ey~T zjPNru8MAkY9Renhf;sBsvlo7R zg*r+axr)cC`vI3_rIB~H;6g=<|6ND_tVi_Y5`AcxioRP%&+ZW|IovmO^mRIVN{?ts z>OQZdN9gEp^oX7=(T@_{lO72EV&u}=V(mwosc1_SPrB_zpnIAhsj!mJk}2)^gdLCX zxjm3wxQ+AEh#ugD#rUBcj#9K>lKoZ#J}F$n<|_e5$fH{ zp-3*lHBlqU zPk47fIbUJH1|5BGkLYTN{&8ZZ<)P(&D- zwD9~psWl=VA+1SGCKQopW9MdTKmIQ(tZix(nUYOcI)hGSS~hac8rQ6I+QvJjr?bk$ z`iz@bbb9Ixeg}-3H;f>ZTEau#FRvdqAe9sL?Jch_8X$p1jO8~XGUfr_7mhb+{_c1S zd5)G$X*Ci!lM>?4OU2R|lNnOuzNCzCFV^G!Gv3`JY>l8DyLbmJ=JtqwP@><`(J$)g zn|nl8N%R^W{c9Z^=n*YR-N$saltkg@^oYJnqN|DSTHd<(-4oFVx!-#{eee+`_|nBc zvRo+sQKZHm|JYKNOJkAQ=E*}%2k&G~Q>E_wmF0*rbI?v}O3m%wA4W==jQ9ewc5V#Y zW>%POPItg2B#Yin@Zo*>r4*`ZWaZo;u>E5}v!K|6pP{l0#|mVof% zz7$_*)>*^5IB>5mj9p-?>RyvaTF1JAcen6s-hRGzZw*CwZ1O%>L-cPy%jP3hDhB{uek zWbWu<)D+=70oE5$Y`DCo>1TztURchtnV}_3ez9xd)KvJ}kedL-+?_PcJKCtV_NBgr zep*Y0G|$8*h`#gLTJ?@uX_%;gyl+=IHP$7a%@)tpUub**tp=^z0yLgYxHNt+LGH5i zRNovToajGFG%^y2K24%6qCviHeDB`RV2?M1=VA<{3YViz@1l-_s)JFtogylPoXMtI z3Hp`DPehAG-C495VtW`W%9YKWV82`5Pd0N|MeOE`x(5gWsic{rCy_@^ z(OXMhqUc$fJ@60l!<|*<2oW4>kN7R;)Wb)|UY>J7nVq*>G%Yq^Oa;E@EPRUwOa3x@ zbI_)$UHYN1u@PO*Dnk(qAt)!vD z`V-_%rVOG7=;-fA^fn#6f_Jw>NAKsI?j9@Af7a0*5`CtQ-ln6!BGLa(NAH&CBVQ3@ z38lG|&+!{_|3G>@PCvMlqDW5b3zv~mWVUcLphsn#BiP($@>|? zu8}NP1Br&8KXy&H zMMx%F?yhFFzlpX|r1F>+3w)L%z0kzPo2uzZr4mtNjfGW8k-W)U@eGy^t2O;ZXYsN5SLc>E=`G}A; zp7X}>0lOmK8qc&Tu*PR``wG3rTZ=+Q#gULzJ;aU;w`LSrGX~kQQHYPMa@3%1&NZUj zIHTW+jrIupqU4UV%}30GxREVK#2pUslv}!T7KzqqJ)b=l348EM-SnffJj)(Gf;>uV z;c41dvc-5P2F*CF4c!C~tqYny1r)e+0gx8A2kU*(=g*x&A7A0B!H&ZW9tHr3YK zVe75n!M8Ak@jj6}UI`C<7eU+PaaLa3TF;I>;%{Q_EbC!~v3zr+Hc5$vk!1VXK~9sA zZ#aty2-!1=LU#3#a;NBQwo*}Vr&XODw%$uU!qz;5j(A1ofr$S=`&|sNfcy~o0GX{= zULUxvAd&*>CB|bRZ1~JRlvb1~kl(QXaM0fzseBv3VbR&730v<1=%JwXR(R;kyzLC* zTGp%iQzn`ri1;dB6n3^OM7N-XFvMycMRu*}tx2 z)9l^dGh+Sm`x&J9Y_%6W3d}YGa03I-mf$vMd7wHQTllGaklRm|f*FC(1svStcwP1d zR&v_HXyuop*u;pa+k14~p0mStL3rr4ipuST-<%(*U9bBzbv6*mC5(0RYMzKZt_?vvRztJhY7uOj$370ms>=itmN8u%iyQp^s@D zfJDJ!rb0dFVNm?X&czA!2fEcvVD9$GRmcb6zR@iXm;8YH4q^KT1>p;RfK>Pg1<}k~ z+B(;V(1`7;f)gK9KgVHkFRIc@zX<7byt=?QHw)+4g$N;g`V$hZy2TKI&h^3g-2acg z_W+CP>iWgcnNwzf>3s%Jtg-iob%r@0Cj#zbEe)1xMq z7^Be`#fBxu7Gv*5QH;G8=Kl6M!vH4l``!E9|8wv2e{K%!Is5Fg_S$Q&y>?l~SG&Cx&wnp=je!)(B;gAXe#*Epw5LAq zmvTrM^|1xgC-?q#^o1z6?t@DL65P!2ARxMsck#GfEPXZkoD6uAAeTbPS|lV^z*Wtf zenb>>B^|%OYu#0XWr^xjGC!P+ptbo?lvg6YK#=mpk+ilWl!$Hvf<^7{K76P7f{6Ia z#1wFkRwi5lfM9WXI_x4kwd4EJEA9<^(VO;kBMBx|CHQaYWAdj*!Z*hka*XxY`T8mA zi42gg2=mVx|K3H)KVIuLNcleidwF)q-{v3s3Fp8>+#P{S&`T!z3aE-7@0b68SQWae zZ}8{6@@a5#7DoXE+H)1fEC81Rp~h0erjf;862xMPf1V+}es~)%qPLY6GYSD`oJDVv z5YDowF{pM_1?O9{i=EqmPD+-X{!e;c1O4Q4nns*J&foD3FYp%BGZm-|Slv>-SPC=;SABpb34#!T*h+Z1 z{9E`yQSyKut&q04Rv3tLeMBT$1L*Y>V&TvQ3Uo-SSaL*Xu}JiIRdt^-U@t#zC!Mv5 zBfbhp@`I+;WArWDK*Ct;eE)uQ_>DY04!^h$Jss{KF1kPT@_sRxOX|&w;573*7EKmYXY)STnl&IE0?TltfQG`iuRmz3S^2?p(WTd! z0Am+&X))u1P8vqMW-MPDUDEFXI?|)+M^D;L6#_F<0S)RY=%k7E&kBfm`bN@XtLNtr z!h~e)EYU~ZwUCmKuKd7TDiI%yXY^EJ{irTWUr?#P?bA_1_M$5K*rZl^5VlAUJI<#{ z3Hn&T6(+L4{}cjM{N_x8#Ed5GJ9@)YmjM7^PZ_6tpqWMl9fp=zLyA30EQ; zV4n=^ zn9$@WA5G4Z@yQ=1ktWjV)mR}b(d9a!3%O-aq|0(xKoigjQhN5xS z3dRf8uieG+k+z~7vhZ82^PE}l~rux?;A`n?ck$nGfwz#*_i}fK&D2KT6VPJBQv3mZ^DdFLqb_%;4izPgqK17@nCXIjzbn`66YjP*Bz&H|U zVAM?Tz#1QK`C)Wb_dmvr>`K32d6s{~x*{G)(>z`&HuMB7NIg#^&Mp6;u!>C1Vt)Sv zEEt>eV8TQsyon@?p(F3ypN@p1#Dt@K3EwY&xhmlukcr}0n{*qZ;TlsM1wrdyGw^rx z@t43si8lY10L`VM&;dzO6#teC`yi-E^Zz=2#!i@V)SpdHhV%ZZ-X)$+(EByoHSzy* z`VU6J&(PnWdL(@h#gBc1jrt>DtiKic?tibmFJV4{r003NVtMW6|1aa8E~LLAwe)Nh z2109*KAC+(PYRn$i{4m477fMiD~sGprc5rY(U(Sb`k}R0ogTMBb$SKW7!_d)oXVH! z{0+aaK8Yu#6=1{WD8)=8F1vb!vn(VXX4{=OhD4Nt&XtwU?|l0I$QcKP85qTGcapJ~ zc<~bS+4Y2OBY%0Le&mc}&dSZs8AqL!rI963v=dvzV@hHh(s8MOMszW@@|4EX?tN1a zXr_HH*70Z>J6x-l`&V=#?LF=iA@}!@&F{{_Eu-)sJ!!Lequ-=5(Sw}$x|P_r_ogRe z9#j@bwhlo}F|qw+GU2#gu6Is)Fca`6t`cS>V>eEj?D92yI;T7coOpJ-Tvz3IRC1I} z`~z52)i>;sqqbvT4LO+x3aT48%qkjd97?+9US5pwg^#qFDZju1Rc*Jptpyw|5vvHC zq1_Jk9!|2sPKmS8CAqXv;`B;0zBn_qVmMr@;LjN3-OeNEc7Wem0BK)_%eMNIbSH~8 ziz2sH^qx}sbVj_0bwzv3_imSKv1)$86kYM)9f!t#qLsLz5ompDXL&Q z?rH&s36>b951h*1(1`q$E_p8{-b8T;ews|YUxxSJ_b1W1W4ert(GHI3kNtU=&@S4G zsp1Mg)Btd_^5e<7Xsf=vMc;vKpryz~ue;&=SfxOYtSe!slZ)Wzl0`a2tFIEe7j0+) z{|e*VWX;1nsH9W6Pz5@2oS=6%&OIQJ>7!$@%}0X6T5+%^+{m;l5}?XeKmnay&D0xY zg0l!JKq;VLrQ!NkXHxBp=ZZKCw9`d%yC5?3gC(z#Et@21p;#_R7eA9po?>w?Evavq zukvt0xZKl+X!>xJ$U}Bw5Uig1u*%1WKnXO#5{X+Mi*AekPv>@qj`8k}A@|cFZUN4! zAqZBek$}(2I8oT%U80VHXnc1S%qKX$NBG8vb_Z*TV0~IN4V!Si(p`z5Ai>#(ZFI@R zCs3NikRA`&e&bV|AeT@D92bg?M;4tb7H>U{D=LdC=}imar#!7A3URtk0W_>$k0PRQ ze7Kh?2o_fvHQkKEtOylcjPa)_k9f_SYXJ!durU*H7(^vAUO?OHK%b|y97|?y?0-NX z`Ota4a@r>GTn0_Q&C`yrM+8a}c?3<<1T#WL7d;Z`QDm3SgWOSYR|wxg@-qQ-c^XM9 zqBvx21oP5bHWnpO`Y4PEc{{cUcM(4d6N)>$?JN=M$S_5T3)@P|>wp|G?4+s)6}oL8 z1wTH3Y+l)3w53AlhsLhODLX`%4C-gNR7^#Lx#~=>1sq zK}sbyT%@&T+D4Hz_m-~?@)r#$DRP)QQYGw5j`Bg#gaM^8v9t&oe5DA!CFxgKrI`fj zw|LNrynctI&p={&9r33W1pG_OYdOwQ-39I(BhEosS0O zWKptWb=nR@kk0oJs{>SZlDxnHzrdH?R3yHAvC!`uM3(14zWWLhOE^&xI~K1dp~G)! zVt*%s1ZTJsOp8U9C^B{~itWsn37r)PgRA5_i@I8*PBb#22q{?U3yV`d2*uWs;azkI zcL^E|2#xY^=-H-hAcY{)%pz;YaEchoKQ84U8Llp2RK21yk-v*wcd)MVLa_^-%Bb>U z*Au+17DJC5bpx3pRTj6aV0??~vr#&dTq*7VMewLQ#hySG?+19J&o}BxacrQ{S)|6M z<_nQb`kmqu!V~0T!V+f#*;RB!@+#W7kqEi!_6#imWEX)= z#;By3EdG|HO7`v5f=^n_i6Zn-$~gL>4>}gU($^}tpp``ut71~4P(~#Lof#o?MO}#( z=mN7pbB-#1>_emBYDG{C^4aV_LsU%BQ;Yq zo5dKy$BgBJ&}R9R`-NDvnoA(nKBZyG1|n=Q#O)w5rPy*7%WxQ010*BKp#eCX!x%_b znrf!BL@1n+lmI|TH@tNG(drYGaKAVRi1VNRMPA^l1Cn6!u@y6G?m$GtO3~Q4i=?Hi z>Vhjo>Y;Z}rV2|sW_rZIlvIC_TPgjqSbgEtYJTW$5sG6seBdOEi#M5uaX|z0BN;tm zwK-HgQ_gF!dbIt)^Ui?dQ%bQW^fK$jsngEzN8``_NNOa`8a`N&9$6HUKoAJuS1=!o zEudRCC-%0n&VY0(YV^-APjv--w5AP7W$xIx0lFu90S4WZR&XjmN<9Ce&zAh!TL< zl!rNo0vz=dU94JtjKCIeMAl4Q!6MF6{E$ZY3|54nC>Bw|y30uq$;{>G-G8^8?e zO9aZa9R&SSsZo@6^z9;>=XR0JbJ(7zD$FC>!*nH!5RSAxLfKJm<~smLI~uh|jc3iI+Y;C&SM z{%hMlP?R)7;iUzqV=&c-GxPzqZ0a;ZdlE|mD&PdI=+rGj5!QsmgQTz>yB$kNbQ~MJ zL$d(Nh0>`w%Vs!GLrPm>Qp*rvmY4tuQSj31FW~gjPDRuHg#iLv&8XKY9QZ+7hrJ>P!{B}hqd^|dR06kF|LR#*`oyP1}2`1*SbDH98CNj z?B#bM6~*?5aM;Bv{`mv0!~virh9dV3I>S$CW^Y7X!ax#6MYyQsUhxKk^JP-aMM#oZ zz#Sskx)C#FGgSL!6SSa-HV{8UP(;{5d{!t9AU)tN;L)2P$oAOOeYYYsL#7@gNWiA^ z*+9xtp9jgO(XV9A9zuR}nd8WLjkClr zQOzu##`mvH5{EG3`%m3e5EorC?FgVomy{eKMP4%Z2+%+~K!_{l2PB59ZN+VU0V{)* z_zDE4fV*`87;In$j%*y-tRUw%9s;2zCJ^FFN4Ao(69>YDppbvO6P?-y=%R|eH0v%w z6dyY9-+svq!P0*m--;fccXRl$2?r`z0uQN{km5xoq^zAw>JxCDD>Z6UEuCbn;hZ49yfL~Pl_wu9Kxi0uzzdx6-9)Voaj2N`5G zLtKxZ(UI7?6Sr7mYe#G;#MXq^CK6j6Vw+EFMq(p(QCi6dOyta|%4U1)eGw ziW-#Ag@7EHo9E8Y7r_q58J$nnOLM2T?3tOLET)l+FQl55j0yRSJaNQDoXL(YR$A&cyYui-J1b(t}!bZAB=H!hHODo9B%pM*l!hHr00CHw! z<)o%~+;L)HibABY?mfbq6l7+5x+Hs=H5D@k*W|F~1e2CMi9J8_bvH7H2lPnD%Si<> z2ri>@@WDEnvQqLr$+;wVNgD-|J)Gd)vL`9}u@ar6^a$-*fjBeuCsn67^G%FTlN%-Vl3EaY;tZ+ zKHk{{Ba^c-v)%d0s9j;*!w^QQW-WV4wGr`Zz!}gx!r1|jh=Ak{C-F;!pP!nN<<3hk zXf-xDB{j8RB;h)M^f`~Ja+V@Qj?DB7aEpFv1WJJqlgw-qZIu7Z2fnJlr@3QO#)7C> z{^Qf)sF2YCFgmmg?8)eoqo5d0&CdCuwr5LZeF_q{KLF1F45Ru7w zIip3i{~|7{gb^COsxV?qNuDN?S}x_!C)YhGL}b;*I}wGNGE(XRRpkslnk@Gycb3#S zLU_VQ1M^a{^V4(kM&escCEGp5lkBN-6*26W6qh`3fU{p>RQ!OrM5Qbo)js+s!kGkVn?%6hh$IFCWIryTKa@ye#@TZyD6%6 zoO4LBD>|uP-{b`6^Re+xfy9%9GD78~r=w*fRnhN6B1$;56#L7fokYSj*gY&k%!3b? zDnK<*6~p;>F58nMev0uVx95`v!3nK$%bo=gOL^$Tk<>+pQ9g$%c}V!j6P1@UGNShY zCsjojl&?tGXW5G)Rkupe5jzoezBj2BHF#@mRZorZZxs5vu{p!rC1ycXjv^i2*!bSb zvGMVJlM<3+gdxeGpp*+KT@pUgA3^d-%FRz1nVaQ~7@n6Bi@sSxN@iYSVq`lC5}tUV zPn(S9w;gatV^`J7!FnlQyaB_9)sE*&u*x5BYk{qDN4#3@k!ZKk+43GKRn+Ur2gnW;V${;>esFPlhjQ z90q2-r<(9hMu&mwO-UW9b`;%6Q1nYsT~kKpqfZiz4g$u3nb{cpVz8Jy7QL|45u;P` z($KBOkO#DK6MV+_2W*&|`AZxLfrQL4@p%M>3yq$~E%sVs(#D|6@^>&ZFbo?bGM^89 z@w!jC)67{zA%MbSB1bsNW;O zC}Z4NzHS{LNd#*aCQ214hY^{cd?F&EvT}0rsBFS?VtedL$x0oVGXj|8sO+@&}Yg_Lw$ASflvps<1 z9+NA!3}gV}AM}bt-|F!$W)4UXMQVMi{IS`dlraQ}>W)m69BAJTodUnJ4^0a3Vl`ebL-1Ov$y>8;fY2jYrd4QIbW&cx)z zm={FRC<5|L68<%WFI|7K6b98&*P~W8s$9`OB%F;5JJT>(1FOX1$wa(#4~vQ!5-B7n z42X|#5+OqHBlR~W&n*tE@(J`TL>49fFyj4h`PI*NHF&#Lct1aiV5q@)s23u;B!bbP zniJ+ulTFKKT2FozvSqosHiw+Ke2_8^7~9UABX-m9O?Ipv_VG>6*w|44`Q7R zHXtrZ{cDn$?P=;JuHZw|q~yqcuH?u812AwAyE!%dL6@okzR6vnLI%r{j0gF}$wwlr z#0FiQMn*E2`6EJ1!W&^@$ykz7}g1zJh-8U&8WK~npJ9H0waJ#~^wrTXg;B~F+C z%Nk-G^WVMmQqnRp%jaW3spChwMVKY3n(jd(;@N8EG8X@${s0?YyPdH6_Qhh!c@QD*qL|hUU zZ1RjpRX?gm^^X-N+wuqIND~O8zWXFWb)TxHqpvoT3<8T};#D1xOl0{<0n~iy41}}T zf?~coD>GFrg__aw#i_JvFn@`M_EL)H%P*;agGKE~BnEYoRtVJi8-+=~_<_E;2@ib*i+C1nKac-pq?iH5!al@6TiX;<|Hy0~)0u{CfJ+_|0%aDz0vDb1RZaigCr zh#(?OlruIqelXfs7g2-6M)vDH5VIOCgd5<_C1ZfJK_n?305RGB7*i@(vA#+}2*38K zMy90pzM4;@jxB+U>Q2Vgq60wnc4wno>T#2)nvp44g#W|@2!DzUjGkxaa8ag;V~!@G zM;ggHbQVx*pdz(x+LY=~`eKl>v1HaRU+S7kQ+SdH7?u2*^!Z|&q2eGSGdr1NIWxQ3 zN7T=V@d;2V7#UU&gcuksv+=))9g8?bL+n+CxIqUi8oX*fB#Z)vEWs*-nF=!lW)=*I zfV<@=1q?ZXq7Y^(%nX=WFqDkM{Pz#b@p45#U|^6^rPgS5I=#VYG?~n1i^XcQ*@Htu z>(mXaSHD5SMvWRj*Q9B)<}F&Hr`o1%yY?MAcIw6`<*%S<}YNi z0G6lZ$X@{N!3aVgRg{|2P+Cey=_vzcq)e2VvQSoBC2FUFsSqlZszcSK!l-&weX0S~ zkZMFVrk67@3m3N;MpN~cp9)T>k$g$^f`M|r5x)a%q6p#Bu< zO{xf#pH00>&80q|7Em8ipHQDuUr|e_Z>g2kYU)R7164|GqjpkzsQuI->L_)RI!paQ zU7@a1cd3U|CB@JRT1D$=3mrm3<^G?a6y^sND#vPX zulJtc_4-r4wbJXidLQ_$k88MAfx^2w+T-dZYC@=dS{3mTEIx34s5Kz{JL}PEkF!s1 z0(&v?l}9%pJ@utt4efL_4%ePm+pBZ&usUotSmeV0K^DCJ%~PFCKS^tcs!psLR;>`A zgYUu0xvJ;y6RYyA{a*LjAMwg#+^Zrzk00L#ZqipZl2@y(kDpc(q8iD{YHQ6@s-S|% zHLNv5`0dsHey9I47OeEGdLC7h72V?Vpz@)gz|}S2UbXc}Wi^9V`U~+vb+Ld?tAKeQ z`)zlttsrDo!rsUJ#Gce}t@ii&Q}8~lVtNv}MhHIyf3fRjDe{IYM zxgV@@Ojt6iRaElw$k_==1ELoU@6t7J>9Gwu)dzWY-DfSfm;%2YYfac<@7cnU^mgyS z#!C;qUEjW>RcFJDMfHB|-OH%R%iE_6IM=^P&?`R-4AnM#bItQb!`!caF(-O`+T?{f zVSN)K(!WaW)3eEy!loSqzPnjsSB&V>-2QINmu)QzosBaWweL_jzc3?S8GO_`SSKGW z^lp*YUbD{9x~V$*hczbM=7^TI^lcj~dh?JW@4erwRm-h=ny0KONNU_*RgdR7?ig%0 zH7{S#d+PfoCxy3b)4tT*;N!zN&$r6yKBw+C$1j-lIk~UJC9U!{9+TIk8NK!H z{y^KvAn*ImZE4dcT>8N^EPb+l zJKfj&H(6{0X4Y-EH2BNLE&gx~?z(tDzP;P3Ufo{!zT1~WW9Bz$V)D%1U;nw~tu@*; z^-s5Lxu%t_-Wqtb?xbtv42#JRDYO*sX~G2Lx8J1aPY-Sskl!uNVQQVx zxy7-7P8}zobG#6>r%6+bJ-kzR?pm&C<1Y`@sc)b5fhRER&F2gqPulaaGQVzs^NLJE zkBaFVrfk2-yQq2lA$1$L(vv!`OX^~>y)mrWkc^~)KpK?zgKaxLGJh)%W_b(rX|JCz!My2<{aWT{e9F>0lke7VCI^q12-}igHu+qaG zc(0xlt*fV9t2}wdJ0Gt7-rRM6`}bm4`p1Xf+azRR;oA4_d#|1mt#R2$yjL%ZR@(j8 zds7Oqr1<8Os}kHso~^epK++%xjWdz&N&)sRdgQ$(#wtu7e#v`qsRZGJC*B)UfR)p4 zd#{`oT@xl9^lm;Q1)wEgeB7(H`rQf(w>S9nbm{s}7rnEf=aiP)PkyuF#KI>hX`%JI z`{sUi@>B2WLVE5^@5wVFI%`X=JUw;7TLxhLQ&->b z=XUQd1hBmL*{vn(?_)7$A-&_C_llI{$nS1?FX4(w1ZXjN=hHo#L@Pb@`s3sKyyM8e7tz_- z{y$c04u!_%Wg%-!qZ$m>g@S^vs6nJiRxzXo* z@e2#@Z}MAj6#A|7n`rr@Bo6gN%O+Vn5A_F-9R9=aF6*I+bsJACy0P3lq45vpi`QOQ z=3QUdqt(pg^S-;W#CxQW&b|1kY~%fp0sPC67oHqE>|F+M&&7RO{>}Gyzk@5?;l#b| zWe-olI=;`w+iOZ6orKled-C!5OK$%_0{n3H;qe<{vCMt{+>;}Fyo8xUvXf%nKESPBcjUViUM#U4Z|ENtyL z>^=CKXr;$qefrz)qP1k;p(i_ci50S0!lE0W{wOg_HBs+WTd!4HiNFwtX?T;dA`e5x zdz{ZszW<%Uwxhp3G^^lb3?HCW1PFrf#@BY6{pU7VCoPth`l<+S3kRUEZa*iIz=HG%)E znYI7M^{f5Ig1R;T&_%BGh=pC_2gA}@f4!*Mf6Oxv`^-}dI6i8C7Ol0RQvtQ1_oAKw z&pZR3{r@}sXX){5exA**#Ff>*&(h}~c(p0`EPbA(=l?3bo`v^c#eX*Zv*}k(Ztm`F zy5Fn4_%IIXeZJTH56Sc6M&q*HXJ0p7>$U4v%xgG5XcMaVzj+FKsm|=`1y9GA`9_C4 zw~^!frR^Q~bg0hsf!jdGz~MvT?sm|>Wx+4sF){FU_!l}R{xTWv(;WQu>5lGkGaV;O zW;vFuddtC;zU^SvzKghX9Q3R2I|7@0;5c^ZL&sdt0!J@yp`&cZM~J`3@$HCD0OM1K zxxwdv^M&KcsxJZSD+gPDG2kt6=w4e2nBO?=efBNjE_1jxEC=irjK z%_iVb>KGon8F*}VD8_C9E?XVzc5MYd+Z;iL?Z9cfWBh)L z1^Vm)j=OO`-7moN7sqdE9$nQy%+ezg4q{G=0%&u=u_W{l(B}`w{?b1{ql=C;sTV<~i;isO5@>bF!F+NF^t$Aj*1a4wD|axz zmxFGX9WzE=2JJ388ZcKtzblT@?_U88uQ+xzsQ?`-9GBNtfR?xI}oI^ur5i?X@vP`15?^10_&@##I3(LF~m!+n&~eaFv}@1v~l zJKEj6kMerp_~hjWD69y%T_dWiDFciijUQG?#`u z1DlL-_UN?GiTdHxbid#%KEp-?cD6=v#ugFIEJs9-PDv4mGhdBB{g3GVaAt(O&ifIE zM|=`deCC^ocCW8R*sT$xP5Ti3M8r#N%Ms^J#EuloRd)gJ`s%FGRnfuVDx70;QB;^K zXmn#&?}sg1ue{mbC9l)fb#tS`b$CQ?S3$jguHrKTU8lZ&(bewtVXnl1nXbUjxvs|b zN4rLwCb%+YOm@iv-*ky4ie0GHogmlBQvpHr^2 zf1U+Sf4COUxeUDibmd3h1a5a-hrADf-xH(-wd6pV&?%Y~Y(03v++HCxZ5AlR*H;SD zg4IHqNh=t1dcmzS3O@y!1w(*U$WYjY9~B{jEU=Ccp$rp7Y3d6L3=M^4*2coJI!%NR z8Z{F#Tec9wI<*qk_i7__>eEhmC#i$5Bc+pYJiCjqeSBA8Msatc?t-2|(Nc%7^`{77 z@2`UJ)!8Va@7-u&Z9re)dYw3-qC>p!ZQuSvyVOKs?6@SMaL!;MYT5I`&K)lb@(V)+ zih4y@88S?;cTE$z3`rM)MrR0bzyGSRy6B6Lx$uN4URku8{NF`$DU0^Mp={ z4~41q=YyULgu8?PC7AOU3U9pik$AW$PA|d|VC&G@(PeI?$g=t;B5XzFi6k_wg z5)AKrEd(!LEV%b95pGm01--u&%9<_{3^B`vk1|#W88cQ2uYLWU@Z*kELa)o;gZ@7V zZ1XijMC@AO=aD}Oqh_xYUR}9fSa9$sL4I!o%44JOPPa|MvX@H*e)4AFgD9u{WwJtBnXA4U0LNB9;TSyORBP#RAOTf3hYmb=dgd*3=M)LVNF<#}F6 z4*Emr+wr21k$g#5TU0J|`~I?U{nQoVw}7iC-#>*8uUr$pExs-cS#v{ZcmAf(Q*&Dw z+wG3<$MCx-?|VXQ>3t#U+5;gs_>r(P`mxY|)DuDe`BUM~{gpy>Pw>BIBhrJ6w}_UE z=+_)DU@B;bC}@Wu9bl%y%zz>KwoNcwVRpd$0z)1a#sMS1RKcl=Pdzgps|(##%|EZa z_FwJM%dDBTM=#_0)f~GJyMlV)t!)%=tNvT8uvXME7)ULyVakn*6*Y|!1Fo7zjuBYR zzuKY8jb~cXR88|tYKksp6jjqeUP31CfZTl_2J7BFp8n~wh&O!eg0&9f_Sfe|uO5Mi zKg;cLh4k<6+~~FCZj+a0Z~mj#D>0p)v#2<~9?jjaYcso6A)}Z8U2yYm@#%wlwhA)_ z@~k|_RIhcf!I>{ab!Zf#S1UD!(8e8mznGmmAfio!I##o-Zo{^&#I*dZmt!66S~RKO zv}Jo|T=K|KuMK}GLFnG4Q+SWa{zEhJMtgEzO&Kzrj-TCDEvL3 z@6gxia{4@dl0Hfwr1#Lf=&kf7dOiIE{T;oO{+j-b{+OOmzfZqM&!%V6Z_4?=rFo29ZXwk6Ev4v zT1f}eyl>q7n0f%s<}K<5^(VBP<UZiOwGW!m-Oz__N6p!U%kqAr z)>CVsDP2Xapq5ih@%J_L1@#%Vi29iN7d0PR)%U46(67Ety+svMGpXs+H0WIm@%IKb zjv5PHYykyTJ(UCP>DGKzsWV^&<5=w7G+*MCf%Bs5sQ(K2!|Vn~J1d z(EK_ue(ynbgEqJ`^uisWA#Mw8aVzMJn?r-#1iIvg&??uX!k}dig}&Ja&9fOgXals- zTIi)!kP?9yw96?TwT~eaCa}}+;Y8o|aFa{}ysOPYK={w*J^26kO(LC0{a-eO6o2>l zxMT(Ws%(_(IQY6y)}5Kge9t^(;@J1uZLFHpvpv`s**Dqm*puvIwlNpZrE!zFZ@Hr! z%h%`Qc#6|-jkpe6KW-?O51(b+2JRqtj(frd@%8vNypvDh)A<5^HvbX-J->y&&R6nA zc>{S5d8~Yx{5APTejEQQ{~Ldr|AW8A-{BQFgH z8pJ5oN~1DV*+AJ{8KLZ}?5})DIZQc1`I>T?vRFAsIbZpOa;frrsphE`s#dDjs5Ys#tM;o7tInt{ zs;D47NE2iV3JYo+)HA*gYIHE3a`{CP0AL^cFJx_r!rPKK>4CFMOmO6r<|&sshq1^p!{69M7c$|Q+Ysn zM0s9$S$RwOK&e#eRl%xysurqts%|Q$>PO{9;ycsz#|Ms-~$vRDG=aTD45|qiUmShw4|=AF2w~9n~Whrw&pZ)pm6& zbq941wM*SkJy1PVovI$Mo~$lbzoY(_`cw5%^-A?N^=|cV>SO9Z)D`MG>PPC9>h|jH z>Iik5I#KabGmlAE;^^Kx9&wwV7Iv z_H|IENV`b;rFOY?wRRIIvlo=Pti7&%psmyf=ro{A9bIQ#4_%ZlRySBTRF|&H(iQ67 z)Xmn-)h*I}3CgV2m20nQ?`xlG6*{%fq6^ivMGOaG^hba+BD`Zx4b^t1Hu>X+(Q z>euNv>38e*>yPQr=8W@@yKGA=rU!ng&U#c(D@6-RTzoNgPf2jBB z0}Wb(%~03S#n98x+Yo0MVtCmw+%VEG$uQmUw&8ulCx)*KD-1sv_81NtP8iM^{xsY+ zJTb_OW@Cu4k+He4ld-!o(%9FSW_;C{Zyal!YMg0&&-kJ7TjMI@PsYv0J;sB^6UKAK zCpwuvNUzg}=)Yxh^?mgN^)Kk%`Vo4M{&oF(`VaM=>c7^n(*LO6tlyzOp+Bdu z(BITQ(aQ`$2A!dap_QStp@$*b(9bZ~Fx2pxVYH#p@TTD%!#u+x!|tDOSZ~;B*kw3mIBvLLxMHX@utt^9V60^eWu?{XHAz(H%#|TO--#$T}(Yq zF{XIa5Yx-1Jj9rU81Ev+Cy24hwB5AVbjWnZbkTI(bk`JM)|jp4I_9S4*5)qep5`R; zi{>=*tL6gpIP+BVO!G(P&&}VOSDAk{Z#C~RA2eSz-!eZo(-x&gZwa>4vvjm{vj~C zzP2p0Y_{yM?6(}YoU@c$Zd&eJ)K;T4)Y`z>%G$x&!|JjQwhpzXTeGaAt#4T0w9c}A zVO?td-n!1Z&AQwAoAsFWn)QzLsg<#*ZAM$Dt%2>I`u|V;|EK={zgz#;7&jQV8-Fn# zHl8$IG+xD`V&0@NnM`4(#*mC1P5n#*O+!torfieP^oD7QX`X4J=}Xf$rZuJwkc_{W z&YLcqZkZmK7;}JG56RfV+|Jz1>@>%k2S75Wm|r&+nv2Y{&GXHR%!|#-&0EYn%?Hd! z%;(LQAsHW-bIqg76V21iZ=2sYe{BB3{G)lJd58H|^HK9@NXBbsxkY6$TS6?)Sz1~; zS-M*iEQ2h`7PlqWG76G$n&n@XPc2I=D=j}kGVX?C{KHaVxnp@`;jBTBjCN~#Yq&MS z8f{IqK5rdn&9IKQPPP_X-?9G7`Y9yiO6vv770YeQLknvSv>L27YfHrFju>%>@e*Q; zvre+kw7zX!VEx3p#Ja+|)w;`i(0bH*!Ft7d+xpO|wPAk5*2vbz*2&h(7HNClmTb$g zW!uKuCfa7$-m-mV`_}e@?I&BAZIA7D+X>qZ+dZ4t#@V%Yv%Rjpk$s`r~L2zO4o58b#=LRnh zULL$Q_~+oA!Fz*`1fL3iV6C*uZ7Q49R>$_7t)upQ04YH-!hTC#&qinNnb8R2l zKDRBmt+xGa+iE*vJ7v3M`_uNoR%w&lRrZGVX7={>aJyjdV^6d{Zy#yTw~x0^wwKu7 zv;WKfseQe@)V|BU&wku~)_%o)!_Ec=1{;EH!3~3(1-B0l4_;|sW8Y-oZr^V|Y(Hba zXn%yI>;b`=V0&;_aMR${!O_9}f(Hi=4bBM84jvu+M({hq^MV%ze;K?ocunx8;O)UD zgU<(F4ZaopG?)odhUh~YhqMUk7}6~yDkL@}DdfcvPsr;bQ$mVD=7h`-`7C5{$cB(D zA-{wi2ss&YKICf1t&m0`%|kkbbPb6N=^HXID??HbxYba3b^q3NNog^ms_41F_ne(0jm#i7eX*M)8h z-5I(!v^?}$=>5>Ap^7@{I+i-2b=ubHT*px-s!snpkEsFNTk=MVzs(g(*jxq zyhnd6JI`I`l!`<09rD-ZQ{~(E6gq|7!wi=z6_5Gp{8jD*M(#3ZAk&f`BYTaz!`GF+ zEpNweW-IA??0W7wE}rqSl)ROq3me0g)6KZ|nMS;k%V*5;Bm4>e6t|c@!-UAMaP8$Y z0v0nB{8V`+JAyvLUS_|OzpLmUP>=tS`B?7c56UjH$^2Gk3v+?{gb$N{ESt%Vld0K8 z{HIJ2KMivY^Z3c!pRz5qTju1x?Q)ZZKFtdTt@dkyB|C;Z@ z=oPzIC$ou}!L?_evWfgju0MZQ_7Phq+sa&EbC^%KhVlzs8sC*aB^xSxB0D8p$sgpu zW`pH1T#|f9z%XVK<`)O?R>eH-6?p_#qPW0MV-lGixS{N_;tg&$@-bae93W#%>{_N1 z+mri>{TKHfYvImg9;YXJSoSXKVfwST*|7*4&aGi)vWc>NTo$)cR>=?I0u(>-X4x_3 zA-hGsQ@Mwu*wI{Tei*YJIIfYclmE87g zoSS21M`aH7InK=wQ>F2b*~gewn!qe)UQql-f6X6Mm=x#vTbOwoDx=wh>~Q8?_7Z=H zJHaKeSJ?BiuFM*CB0H7q$Jn?p1Me~Q_*SxT@YN_zt1|MNSvCI)o6USnuVI|5RgNY_ zW8`--VSGb*K2ypZ;c4b4PA{*gXcpj>>A42XMCK)KlFY(=!@tje&fB>Fb`5=-y~j4^ zw=j#@^?WJ6jNK_Ol^v3C>?HOBHl7WY*X1kN#^BQznflBh>@UoB>_l!7e}kLJPe7Sp zWJfb0Y;WGdMRF<31n@x^X3ti$-DL{U=^^J}-{<6T%l~YEP{10F?=i=%ewf-Oh2|i(lE(SaG$d#W(j+cn<&qeb>xQ0IZ1OqaT?}% zW}_@cQOvbsynG!lhW|+M2UE^WVy(;`b|$Nr&*YXd2ftuSx5(aOWbAnEBX$v+$jsr!1{gred}ak_X1cOH*`rK1_80DVb_V;Hc5;UlyD=Nt zL0uv{%U@S~!8DaEW`9QQ3BsR~31R{j*V#(hW440Rup1aX&trBpfGd^VriXDyxJ<6A zysO;EeiBf@?UOZ?eaakQLKQ3IJGqtIL)jPdt^q&DUSW!uwfviW50OBHTQ%Wzz^UPF{>=&5@fge5_vA4 z8n8-s3Z)Rrm9fX!iA*@Qov8xy!OMgv@~ptd_Bp`9|^u%o;kMje{hepq?yW&1%_V`9tm?^A&TK zjfZsMQHQ)-H%7^_vSFx0gIHe9%a^h96mouttQCC(@h8jX$>uQ`%sglk$#bLEII>VH zBF-V|(F_&|gs-{QfD(5B#w@<{R>w&}WqyeX=oLwwcz z!D>$)n-qP|UzWU*gAB+5eF7~2h6EsMX9;357$Xc>1dE#?MBOZpHw#1jsuUJDtWi9s zvF0g_OKu*B8>YR`OWGiRP0HWvQ+tWa(Ux8JxnGplt=;bJ0609q`t*|zrFY>)>Ai?` zh~Ar?NZ*b?$I4I4%?|#0pttB=<40$*g{trqfFBM&5lJ^IS|sZ>NkJOoJu3p2K*5mb zdB>h#$aB?~ZlUx(ljB=QSK(VnchtAO?qJn>qh+XPf28HljS`&lUP3dVMLkjmdzt8BmpAGTK|KdZ{>HY%#U%Bbir>???5v=@0neNj!E?K$cqRRNv!9dXaCjFv-Zt%v@)4&4wM?Y4Ahx(D>!eW3FmM88B2gC;zW z9!F22i|BXg59vkFo3Eg8#5sgTArTl5DuqO_{LMqWtJZxuU>9Jj)_)YjJ{4vL%ztP7 zNF7kwfR*pTptug@V8E{usRhBVfDT%Gh#(^Z%_of|N9ngQ%EyQj48zW89i*dCgu;p% zY?ed<2o^>Gql9t52r$twu`q=&Q(?qo5&=>?DX~TZ&#wRd%lAL~oBr9~^w0jL|7Z6% zVT0j+e*QV%;Ggpiy#JhUAXSoo&Nukye1m_^H~8m#ga6a#8|-jab?IyN^T}CV#JzQu zC*FUz|F(v=IHy8}BIKzWj*#IAv6HzOG8a=9hDgz*xC0A2*}B7heGya?b$051ZN z``vJzAq)c}hta^)h3N$|5e5PN!z0HmDW0lrhtF
Haae{WMkbu2ND$OcwDOZolS zXFu)xo{cwgTkdn;i#PGR4l@yEIt&Rj4~B&M3WkJT1G5pP42Hxx3`62wf+2D5!;tt> zUC9FeHuLFeIIWFeEM9i72Lb9&eIn z1q?~|HVjGoF$_t65)8p%8Vtds2!`N7?w=<3yaPjUnhQhl`VfZTwh)Hk_X!Na@e3G& z=VBOwE4e6(;JXrr;Jg}!;Qb>E!F>Y^!M_xS+8r1q(m^=7VDJ6o~51F2%5Eo^`j94VVe!&cOwY0yX|+ZEX@XCv-A?g`t>=ld(P?HsqUKey#M(= z9^Z#cSJkWTd7g8B)vfB9PSv~b{p*8|KK}QAKKt(%Uw-|~x8MK%|LgH@derm@_Ug82 zpl9tSq2Ap$+jHcAf4_ggHiuHvP%7wpWPsEF`p~Tgx^Kh@Ys@7tPpU<>eJH_>CK%}3 zyCzT{2nEt~a~Bg7KJ{mXXvy2y>O(!1|XXF{>9=zhmG zCY0L7n8dbZLocPv3^u{!?o_fNCYaij9PLAT9}~#zL(dN0-_#cNr@Ph%n_%K#vOR*P zJG#-6{-p`zerZDaUs2vsCQvwvVjXP)(eWl!7*BV{r<$7dG!raNGl6h3?Q0?b^G$8~ zQu28P#ksE8d z{p9N}l)uD;l1nJw116Mxzyy;Inm}Z!3FenlogStpe3aIYnqcfP;+`}$$(%8f=V>1u z5V03cAWv`h%e`ZQh4-m`A5$zE-0^kf>uXa>133`;fyzpAS|k*xNrnP}Y)v2->lO%v zdjx7DJp(o2UV++NuRtigX~3kn2n2F<0TY`YsEM8x2*l0~1dC?}0`YSwZ!zU94utae z1WfYYKy54=sL5ml!TkM!K;|!jV0sC4@dJTi_`yJJ;z8>2rGY@=;Xo*n3)E(o2Lk!! zRwd*a8AU}}wZoxoi_n?XG8LZ9i9W=!Q$nL;k$o!ma zjtkc0jtiRb@xf5~#9%OfGBJr@O}d`AX~9rrdN2@f4VqkAFc3W>Xd<(Mf#mF9FgKh0 zof8bieoG_y_rYNH_oUAY1`_85O>}NB5T8r77f}8Mb9WC z-W?1S?+%)DE*OeGMRA@En#4bYwb_5tzBR!>ZVko#I2ek25;Xa5gTcsmtE3N7olMG z5aMGYlNlKbU%8nQ%tKg#wA=_#nmKX^;YEjW>Z= z;Xt@g_a1o5FXjNu3q1z$v(~74In`ie)9?ks8aUXbTg@i4n$vxLw@Yg;tGPV1F@K8& zv%hXSM{LC35b{2eKB*zh{hYRK@^Z2p_PFnx7W)HbzkOJzTW-gG32kS@es4efnp(=4 z6N3NMjy=woHu;oiW9_kCMe=`(LX z=9Xi^M=Im+7rhPr32qsEB0pztE4|1pngOk<8)R z&ZaVsj~~QYO!kp+Y(L$1JeBvyYT_ovnY&)Xl#kyHaq7tTatfy#u67D z&v7PofumE3nKXg96i2ISoIOTdM!3^_Ij&co*?6zShcB& z_ObKpM6Ty?U1*=jD8SNVm^-2i+&bd&$1*pEOIe{^ds5CEnI(Ci96~V$9mm}8D(5@2 zV*_!qlbG{uM>!v$9j|iizw1K1R*-FvlR3`izV#{}pEWdI62f(*{SPK?UV`II?Ls-* ziObb9XTLC@tW}JY#l)>Vg}L*(P`}m0MJF@2whQGPK&ON?4a^Bf%3r1+cUS8v(x=Lh2o$MZb#lcqMYX(R3K=dUzBOyznG6nAC)DEkqAEPa-XeQ)3P z?06mqhxsAX#BqGjJD&CghxuXoY0UlCH(tl%VPo~3)y)3%bmmuIv=8b#N$k~cXZGii z{b;e@m9}m2_K)m_|HbrCd;03jsT2EEWHC(q?^1<*A8IqT$2}RFy#B4`>)3>rpS|pdf6Rvq#2(rvZ~0|6#tY_JwZB95m-UzZ zn$q#QbSNE5;Tc?yT3lWudE-MOQPI7p$6c zHV_xPhPh9=z~T5=FWhOUK2llz%E#Ml#6@r8c=s?>fh)gW>O*5}k#Lv#j<@oDI1ILn zINpvF+orN|cH}Tl&mnHTaCjG+O=TR2Q+#k{;dI-ZXZ2iFtHJGp%L-KtIA zIICK=L{4Sp>qGlHUhmH(+j&oLJp3)erZR3*+TC%!e2lp0lg!;DSa~@&jKj5LpAq}+ zzU3=FE(g*$oR#A^Io~+t+=;}Qr@GEvMclmq1Gj>>@Y7w7hpBzR|A9N0xX3dc@5nB+ zXFGAjmN9pMZ+rHloDJuH9AArxOAAMTdf?<8C$by%tH?gp1^Yg9PDysb{$R3Cbiuxv z?Bim;t(3EDyvqKK%}ayC&mccPwq53I^uBIb{M_Z+f7FOhKVTl3NS}Gna{pn@v&q{J zHRb22`DB<8?hwJs>hHPEKtC>{&m!TT^y6ed%D0X_!=B^vwffmth=c2dlyEs;4h_ZE z;V05&_<4?Vrk}m+M?L0~eM0Q3xzC9CE!_os%x^idpHfA624H?#&gG{+m2oQTM{+9l z9ZU8pvA@;NUiPEDxK1!Hu>U1~_A*XkkL!eV7wlJ&edI;<|9e0GvLF8Y&`?f_{R4jX zPI)lDnU~oAS$_7iAO4%kJ}&lWRAGNT*=NMQn)0t8`=Zz%RE7WVQ2rHM{y$Y=KLqoi z*l%on;y62z>@#BDfMJ4EHhwyO&jEK8aV!7I_QeyBV>N%Hnmr{y{u^ zWtt`2r537=JD9knM!b&h>g74`$^yL*qw0dm_x=7Ve$f7hIri;U z_-`lsNm3r)zq^W`I$8UD|BSBWdePA4!n_u7DE_S9LP@1tXhTU2CjPrv%qpx_(6k0Rb&;xb<__p>VN1rFDFi~h&luYKbo zW5f3$aO;T6f6v@ebPlkotbWMY@O>NYIE4CiO_1NTH;jDPF;=mgYU87?#$u0DK>dI*^M~M$UfPF?MKM|^8W4E?sa14cl@Y7y&Y8MPk5Af zEPdhfbk^LLXKWS{AR{dZ)a7W;#%C=bTH`v04sz3mVAen<8(>8}T? zu%A!%d9g3}*~@;k=VN4_>dE8%S5?@rMft@(vk`k7PXp*!4fkUIJ*cg0@{TvpaSINA zS6w6ATEWW3QHA+$K5?1e9PiJ*T*vvy9{0rc@59_Sv~5#aIqh-Z;eI2&-$XZKuE}@) z>-c>D?LL&w9kc3~yHLWF)lc@rzJcsliv7lZH-`G)`_1Sr+5dagXEv49r(?Om+3z>~ znQKKhQW;l%pAlU+dKc#I(TQs#TpfG&{oU1~J=x#xou4;LzaK>TC({KsE8S4S}lzhQ2O?{QepjU{enJ#%|?ftyQQzJWRVsVt|maa$e_^X8gU znLD-%+&bdI)0kV@1rBYoU?!7K>hY=TU?K*c3am$6nzX!3YiuPPWT)K_pz1anBEpfxznXC4EhIxM= z&8tP>s=2>Ak?dnLInMch<&*vJKbPz?Vt=QfJ)fU_@8iSI0Q&SegX8M-Qg+@D|F9oR zpEVM9WA=XM35}Z-Kf}boUtF9Y5H~0GEA@iBtl!JeZ*z&8dM?*5)<*(W!97N%$xE5* zO1yQ%^}n`j@z5SaXx@$7#@xu4)_C&$Ur zwoPSmHrNlO&79aj=VvebQJ#rppSX+t`(B^hcwC;jWS{DS{SvazbisZ#$}jd)t0+It z=jLuMe;;CPvgLLE9SAb!gwSt?k$pkzN3wN=ezWJ}()WCD=McAEIRESZ^6|BVxa49k z-`dXOm9B5lFZdob=pN>Le@83+P(FMQnshJQf36c=Sv!!C=l%-52SpxW&c0w5KFhfB z_Q3a`Ne?mi91ahpjc|7S6IXnUxt*9Q=VU+Xwa&5swV%D`J{q_obUy6=ILDdU1rFbX z62e_jC08eQe)nfG;!nG!teu44n4hWQ=PAE($$r#-EPZ-B!S#Q~&)(B+=pUSivckRW zcRYzd*e{_^BFAy6xsSS<>@!cZ{draRuY=7pw)g$_8)Sln@*GC?8L{{MeXq4<`*yO= zKg<5Bv0sStJkRzaY$JKcJ@2*Ud5vreVtnI> z9;^L-CxLde=i?RZr`bBG{4UzS6?^|6O!L9E`7=*gp?< zNM-fwcs+$UYw0uT4X)3zV35ieR5Sro1-zrR~Y+@iG{&-dSd z$#p*B45Yd&75mS9$8E=U1$QEGsn0kL<`SFA>V*sMj(@kfinw7#=5WupGFKkY-mm>H zbARZ{{VJ+cj~|(Pu*NT5$LobUG4nf*%nJQr9|<(tul&MeoMGH7s$u&TvcIhVWxros zv^U0Uw3hw&x0^lAOV=+O^Ox$z{(j?E5B^;T}L#a+{{txkR-!0mQ%Q>B5+f;TubR1_G9}9__D%?qe z`Hc^>2hL*)#J+*HZ7Pe?u^kbo54CxI6D}Xx)Fv+{yJ3GY*(Wz;d*6R|CiW;-GyIGF zC9=P)9u?-tg~ScojN=?c+ctU2<>64iRb(6O%iO(w?I7-K{ptEOyE)tY{<}i4M|}<^ z`}`Jce^Zs^suSKjZ@?dp-^f<%Z>Fz5dmilYeP<$ZQ~NXbonJjY?Spvp=@Z|EIsfCW ze4fSF=&>Dh+xnKXd>rF=D{jx+6|`-Ww;yFU%7^1_8c5#u@cjD#vF@c>SVM1&8m& z$$gnSlg6%1Wn9O8Lp*#hUb;VX-&9%7I&tqe&Zqu@{T(KD<@L7xTK2qxlyIZE&_5XG z3l8CUt9;|3K|21P0pmP&D0BY*ZmRru;TY$OhBLRhZ#nsT7V{3q`GOJE+n-4G^G340 z|M%q${^yhZO0oZ~UwNn;Na*j!$Y#*t?0<>fON+8`QruL1EMEa!S%zY!pD66;Zhy7go#E)kCg;m(2E%RcJ zx!xvkJ!Loiucl9~3-)zr|1Q`cM)n!8|J1LYobt4jO=1Gqcd_j6tbG=eeL?K^+lc*8 z%Evrf6#JX~%HuhYp`9>~PCbUpHF_g)V2|sTd1Bv}wr%q12b2rfEwhee|3xt`tGB0I z;Beg%oy6RaRdOgFu3Od%H_eZe{kHxzbqzb7dgKevRD6o#ZPDUi^(P?{zv%PZ{+V$=m*qmwD>ub+SVp-e|!25^_xha z^a+NjV<^`EvYmGl zbN32XRxaoJ{#df_@f)^(#Mi##e2ntVB`z)8GT-ubyq-k)?D;0a@wWAgC;Jg+E&1** z_FaiHkorDb&v7>P`!d9tNcI`A?@FBc#0{HVeVoV0evsIACC)nHat$13%PQJ!Ak7n5 zvG*T89s39Ea3bcHDIBLO+*QQoPVG9kg1FI5UFT|Q==^#ba}VM22dM@F(f#{UdHwM3 z<|ZYXn@Za@m2u_wsoKdl-OgMM^+jc_xZ-@~UYBs??Oq-a zzsXu~DRWy_+3t1X-+Nw1IdJ})dIkHtwF~2BB5{QU%-t{k%gav(tMk1H{W70EQ?F%i zxF09`VgDF?=5@h-E!i&;`yIqjS-E7ttv?-O3&j2$-{Y;kA10D*;X1BI#JAnbIegz* zelv4Bpm~t07-!3f%PwS&o{q_>jO%#Zpnl(x?Y!HVJGcuR{vMUSowkFh^7`Yw_WSNw+E)9o zWq+By=lT%sK9@d4iR1tG?vBR?IE?rHPjdNY_aTAgEuSae#@c=KOYHBcF7*FI3Y%EL z+}l--Q?&1V`t-<4JleLYto)c@{r`@Mc0fOc#SgvHnNyjcj^hvUQSRldIsUJ>P!p*dB=2 zK(>?q%UrU`cy(Nxvf~)-i+-84j{V`P$0l#RWjE}{(q~c^?9Upw&+wW@jR_;&s zqr7A3GwBDmUr>cT+HbkoKUIajZNDGc|NJWK(SFOt{$Ewtqy6ULN&b|YH)4nD_B0DaWoCBFV}KyA1$JcQIl`plDZ_?};6 zd~Ga#Qv7t~@9Ky@td`pW_vURXYrl@;73D_X=eje8y4&RCWH;;|qfb`sG3(gmV~_S+ zOP{pZf9%_@<>eYkwxfGiUoKpi4HNrn$~Bkl`-}ZkT`1RMWSi|(eYw_>eMamzRxZDB zfp$mVOcg)-)3#0Cc6a8xv1Bky>j^W{3uXLVxd{obhKups_6 zHqRkG#-ZBZQe}K_xIUY-Ik(R#UEt78Y2nW60*7{5Bis^S4qx~>-Ved`S#k?5r~kO= zTKg8o-*~@r$bR$(+BZ_i@i%5)C!Alu4ii8A?akNk=pV$LCHB{g-}3R;@w^KT{aO&t z|9Ac!+ZpvlzmDFL>p6|KZ7Ms?xO}i*OP_gSe<)jbI{yuzeq12-gZ=DfKm3n%?Bjm+ z&h_LuWWQAWf8=Xle*7-M_}Yr=UG4LcZT*Rx*N?g5eB*8C&jCRypV<4)FCF^@{fYbG z;r<-wLf<&$;{f-=rwVs8mDQ%Q{_GgfZ~USh1L!krYc9wAdedp6>v~ZK)1IZhY_wwJ*X?vE~zurSKy!M{ob!@D@J$B)8r>p!PDp5^g3FafZ zPx=b4V=wYr^UKy}bAB&b*U5T&Sr3x+zOp`8)}v${m-Vk@-5~23vYsXD^JG0=)>q3q zBkQ|ly+qbe$a=Y~Uy=1HS$`;NZ+#9tm+NzotYfksCF}5eLcGN5g6P-^)>&DH|HeA; zS6=5uhx4q{r60Vr)@8K7TLtl-75_QepL>_{4<8}N(UPmtCb@*aln@f0Il(pLX+4%_3XvdC5;d#}@RSC!31%xt#e+c^$`1TuPBBuXB6xIxqWk z`?HS8+8Y0~_^AbcYJs0x;HMV&sRe#&fuCC7rxy6B1%7IQ|6jI1-yO|_k%|5zely~@ z;l~Y6YuIXlylUG|cHyOVqcuHMX{&+}b{acAq}X?mOkI#?}_dn3dBTr%z7KhF9zx?Flrc zzNs1ePD7!%^XQpV zrcAG&VZPe=u*TD8*3W2fI;(MP;~9<3ZD!@bqdV^SZntUXyg_Em!_2pVxVgUD_(t<= zx5Lf%-Nu;bx=%2d_8w`z>U{)t(G7jZHJ)ky*JrFrZF2lE$Bsdp-?ioNhSO$h1EopAq+=M2Zn}f}b)J<>nnNmNq zxm~&Lg8*=Cjp8yd|=JwqlzkVzsD($i%$U-2s#)0o$j0d{ zt+Q<{%+1>$K7;JcbK8$-Zk*9zBbgf`$F;Ohqn@~LmkIUet6iwIh7KJ{{26puHnz5z zHM<{U*6nVBII_qyg&ILUM!?shWU_g-^>QTDtBHiUYY%#n@1FFM?iO=hO><-YjG4)a zt@Sh7lJ(Tu?ZaujnuQS)OwQim=J6U76+JX&1_i_saASX}H2wRIU~By;8w^+0P{%&d zi{4snvl`u^)Y#F~Wv7}eS`{itMnQ_GAtlL?y|ifult9Z6%RW%`&F^Ip$*YvXjS>gu{< zl5O?Vlg((P^>rr5%~GnwHQlI7TDc=iJLl31m~&LVP^-DOTYYO=qxrGt%yx78uGC_a zsrRYlO|DyGgSnq7f;Wo?C%2e4yU}>F!^Yg&%LHf8V|r7&7_Fnx)^6_TKG|fqq_NssGJ2|e zYfEzW$d)#0=s_X+r$6+jbhPB09@I1S?Jccl{Wkj?;2s341`l=R`-5$FPibkLZXVss z&`7 zv4p4_(3Gaog9fL`^&Ef12=h9Qi{GGq%;!Dq;q^#QYC}2*Qav#NTuG|Ij<-vDnzzZg zcrqD-ytyZN8E$T;eT4*t$ko%LcnU4D=g=bcJ5ytdxMvs~ZeHkV{@%03q~```XO?dC z(Kg-Qqb1$ct1&6uItz`hpG}4Prst6(%$h!CT_3Vsiv4!(GB@<%p1ZRbRlT(yjb;Aa zi#$9G4;lJbp*5zE!!q{_QMFRpV`)^;I5Zdb9z}EfOqv-=E%#P<%#0~5=H2jEYSegr z6UG=HtY-d}_6TomRea4(aw|#oo3`X3e$}%*6w!GRrBi zW@_W)X%lcJL#fR*eP|YFHTgdE=C1xNWFjE7Ng9ZI-FhVMmN#X ze=3bm^W)aTWezOuqe;cA-Gj*%``FTd2&=s>&W`aQyVAHDbZZnpU?KoccU7gOZ5xc zCcJX95p>CQCS7ceZ=_kdaRyBzWRRHauLwkt)kjeFZ z&Gkxt-q&1B7U}ar<}bjqa50v}ORO(?U=}r#UFPkwNK1I9$@TutF+-X^4gpTp;dCXHBKL(gx}h7l*n%x>i!I!e za&DA;SMt6aX3Feu8!|7meDu%rivzQ?5DPBw8!8#TTwx;?aq~ZeJfkJw`pJgaTK^fOFBW}TG4#5 z6`z5=qA9rW?uPxB^yB^K(E*n)V1Lt$rZ&3Z?MG7|`UBUxbnWsNx*A|lj|(vm#Cssx z>s#A7@2!4(y2$TA&G?lq11+hCOOp>>e9#DyQ~IOSL;0(Epr{M5%-x1%>UJ!%E3hom zAF|12CH*-&DD$4Z?8nsyos9aoo6KMu5dT2_m?O>W{SP;DsF{YF_xfW}pSv}k;2Zcv z^+W&3lV{R}8BLw>=6br)xQWhO*|j!eu}5G6eXXEY=abg8IH~;?S%uHB%&xcF-`edT z5DZs8%eRgnW2e_Y>_MY-=Ja~=#?~~+d_+Nqn)kNe=K%8`@{_uzCwWNUfMq^ow{OQX zwVZykP&Glj8mH%<4v=UqSJVCwkd2glBf9( zX}V6WgtyH5Jp&_VHq#di%;2lBtMH*+eq@)QSfjOAWe?1XA zYhnwZ(pGKTIIG?K4HR3v9pbM=X6^ucDQF%Wz?X<-IR@kfa4@YYY5p{z@zm+` zCBWQFyHghe&s^9mAd~!>2-VH*%wB@5!hCCRDVF)P-M#{zrrW}=9)OAS6O`i`Utu34mXAE#+Yxn8(rUKCrA60Wb$mYWcyLLPw>e0hv7`$imQLK zAaZOIT`k-d!KLEF7JE*4Ff!6CkBo0@!`aBZAK`CA=F9EqR5P)~UQ=cx6d1umZI=Jj z_FUXQ>_EjWUBCU0u7UD5qcW{_9NfFT$!$;NzQxwTF4K2lJGTf%jpiTQ(;%Ts4IaRs z?qq7lwzRc1<6QaG_BiW(x&uyk-|t{jG`C{MT)QK?0}huf?Z}G=oOe`9z#VRu;qOi`soPhuXix> zDI@nVJG&rat|Xay+}0(BWont-e%@}sie>R_yIru$&#_Fe!!noZP0Io;shMcfeItUS zV^xHFoQs^?C0ORK#IkrDS%q+v?sEX9*EaK~9Y;>3OS}4EEN|Y?UZ@Ubb;pk6_-=sN z#aO29vD+_LSO3B?w;B%RYwkaH#1~lmjpo`t>=-eR&^%rXJp({3`k9LsbXCKGWq zT{Y029PJ&JwuvneZRXyAh)oSfUwan~95J)0xxp+MNTpf`I(Iv0nw^@PCey*aV&EA1 zdSW+UA)CUTuqiIaGMlwUG5;ATbJRl$xo-x^cvI`ygG(8pp zF14UtrXIm|(Jph3Bf=EA_p__q7I>fTn;gk^7_ZxPByVJPrIvcqQnaLDMlqM|%HMS! z+|B*w^E7owKDSBWm>ErW_+@u9HMWS~?0Q^NvhgUoajMN8rZ<#l(myc05T-!~oKZWMYTL;+-Jr;Kk!d<~jcc-R&Yf}oDc@N9N$95af zS)`B{Fs}?6)ikS-?r-3VU?p82XFi8XZXHZE#GLiWPRCS zI$2*wR}#6aHX}B@5X%L$G&Mub{e$;2PYmAQEE{})d68^hv$?6;V6)mTKeEfUcA2^t z`!l@!Gqww~G(r0XKWfh1oo_4g_x%e|yDW@yOJRhj7+*i*RJvWaJAD)7&BbJtd%+sL zXpL~C@$Bw0d6`u-e1@9*?o@*};O>^bs%%yv5 zxI6W?Jqf04!mQD8qbHh$dzfp6)X-C`u{(c9-vHh98)_b+tGkufW}gF^%!_*rYcf}m zRl)9(i&*5W-9zquLVQlp8tbQ6LeC#U=p}@%w;8EL2s6(vQ=jz>Quo|3Jf^$pP8rL2kZw+vQ5@wNz|#@1CXln59G%Ec-NVt+89nX{%_-^>&#mQmI16PHZtB?|BR@ zzu9wSGhNpFkp|p&^TnP=n2YwJ&iOBjeuSB`*9dbt^p~hx>U+C9e{*bKw0U5ty$rmS z@(Y(?-=eEF51>!}N_(zY`U9Pvw)E^NBrZ4VIFxlqG zZXWHWF0#u7cA0^lP3ghKP`X~*!F=!hCYhR4k60m)Ok@MGLNK#cK2WU51TvvQ zFcnBfQ^7(oA4~`GeWIzFbf6F{T3Mv*Y#@=Yji$*URTGXxBhg$S6-Wo-(QF{SX?nBb zrkUDAB;P$9P6x9+$!nmv4dv8kgJclP^h*|lkz(&GF{zqDAQMOja{>Ji5hF;^Y$zUs zUwjgYWHyksM!bVi@)SrEgH(7bV<2Bs3`L_`o@0Je5!$?sCjOEFHArMD-iWDs0E!8_sr7PB^w$1j<_R03iY?9d| zyGgE3ev?9Nu{PT++b!R%&@I=!Kp2Iv|D}T1Mr&jP;c%?bFV`O*YOG8kAENT+sIc*P zJedy0vt&t4xM{H_-#eNB6V8*XLa11i4$&61FEt=x`5LNJBELnVxLu?eN)~&^Qr(Kw zQJHOXJqy9S?Xp~u3K~G=DM+4tr31N|Y$zYh)TU}PHAVVRU21ZnTqqSxZ(8V+>YfV6 z^HkhSZ6=rrQj3OiRQ1&6DKf~S6N(|~u52hybRZQ>CgR~pJXITwWCJ zV>HC5>#1-UG{BRwXuKH62NP(LLNG_Ilqk@_Z|LrlX`qj$!)e3SN0OdG505_i`&*8N z4c!bid(k2-KiGbP^gu_yL3%EIG{Jr#eLlnnC9KBL!qp9uhkS2&cAz}BJcCGADo<)F z(8gRx`6!R-`)J!O58ZI>ph?>Dh3N(t5;V%^YFpo}ZMHdv3TW#qTKO1fmv~o$&x`$3 z;Z;}5hqvJXXA7@d`KTwps}VmY{AI$cR{jPLuli21-<5uIAG?+t2=<-z*I&rq?XO2k zqrVcK@l%lU3?a8@Pt^yJcKb`q7sUo8tk6HMM*YJ0M-i0fia*t`A4s3P{JR0=T@Ajl zBWPn#O+u~jsC9p^mlk~Hfp4LpnX-J zL3*yk<2J3U>!@t5*7_8L(e`jP+M_7(8i+?c)ygM5ysN<{uUh$xC%&s~{YS9D zds=_dB_11;uo_2;jHAJ4N7`)qgFKHv)i6W*B^-P3uD0(>%PZ8(<^}&D@}Z)?1N3S8q!i$NOoXIC6cEAQ49ysN=SV)*Bk};JGlf?Tdz9a8FYvAgpE`kzD5Zo~t^7TlU5fAO&gPrT$X|o7 zSY1sT^UXBRd=ov9jk?pHlrVl&_aj|tJnFw=Mfp%4S9eyP1o?BzGnI6u@}#9aZ%KJn zukn;;pI(*Am-ZYls_73+_Ij-#*JoFYPFzP9UX)Ou&dQ%5d$;`bryE=T>7MqC&<~K1 z`q6nF?WuZK(v{jX%I2m1bv4FET>Q-tf2wEu_zR;Vl(0hoxElTv3FI2{iuh9v`+@XH zV1p7?;9U(qS8ub;d%~-RJ^24(gA!KYRj(s^TrVg7#O>Xk{^DV;pKoHlrReajtOtsY ziH5(<`e$FVcl&1;X^gKKp8m;AM(K>XgYwZos-GZTsei(3UaF6)(H?p6S4%g-;ZHTn zi}r|kcvpij3Lh3;wes$GKzq6xd_*d}lklpQcjJL~HTanDdke2xc{g6A_(|bM2(McC zoZ$ow-qna7ZRGrM!mCz3#o49ycQyE|@RNjBt$ffv1tJ}3Nz!mCz3>)~AuK6xq|{84z-%7^K?0ttE?EnE#gHN$3`jPR=-|DEjZd~^rT zH}vN$tFxjDqI06xLem^(j;^r*;lH!_=qs|9L&MsCPrA~4luFrbGoAj}h51AExuoZE zmR)LnBC-z}^>H=YBa>o-7sQ|Hl|KIRT>aAca5elTr4YN)AFfb7)d!Mx%XfuGlc}Bm z!gSq%1dZ~#8vaxBZMOMH{HreU*r0@!@i=NMSQ?MDSDRZ*G112jX#6JJ}tVI{*VW~P&E8E zU?B<9Y=a6~*O9%ewxu2m+C?EZ!`UcXK>X(!l2#xx=8toPS3mbeO{#3($ zAbpb9poEp>9SuIU#AciCgjWqS@Da`~@va7+5k9V)*V~;X_sPL+lPjPlBzN^9KgdZ!s>Pe(4^@s7CUtMkeJxzCqdwt92gzKhl`r+dSWw(-MF3mOOq{w~($h zpA3>1S{~I8l6^$-utI)k<$IRw-SWOf8s%&ElrJac8@d&jPxT1WmCBbzU`kp(S7W>+ zmvjC_;!ic~2hu0b*(Ki9;B&%Xqva8;e9XhU8oYUd4HgQoTKODjm*TtH#uxrRjW1gH zl!tdUczs?}PI%SIyYa@+PFLIVzr+FlrsWr{yc-X^tHJB@%3c*-wekseU#h>W!51Xn zKZI9ZEw9gSD`@>!a6sjgp7^dte0}cQ2g0jXKI`FK4PKuU_lfYTtL621bDs&XTKSwO zzN-;mpHH_=c-7VN`aHXDgjcP6$`jw!h_BDZ`$5Z}XF&O!hj+Ctzu1TR@qD1q!Balv z;av?r{xTc%5?*z+ygpa2pT-w|)$;LIIR4HWU$pWu&Mu9ASEKxCvENU4)yii)ysN=S zUuAi z!ROv$J}bOx<%`&$gcZu~YVg^&ZMJzrc-62+`$svu#Jd`NLHHMhS6wY1Uc~`k6JE9Q zDNlS?BYs-=g7B)9PkMM)gE#+VgSEn|u9i;<|CR8ntK|#AoBlk1saD>t?>O4&YLq|m z4wt{T@T!$}>kHo1;Pv^STM4gP`8c~T^}nmZ>vKrA6JE9QQ4jBG@cKN{A;POxKI!3I z4PKv%I!t)g)$-8-2N)^5YUR_O_^!6`g&(8wMJpfo@U8~0&y_t&c-6`$J-n;Ir`}_O ziNdQ^KI-9J4PKu!dxG$)tK|z4zg~FN%BMW>U5)sO_t{{I@T!&H$}|6|ZYBGO_{J*b z(U*JlO&*;ky(`^IjZCbuULF-46aAFxV>$nM)stBNU3G%>o2u(sze74=J@aC%M}Ozh zedu?uuKo5NJ;bAb?$Jkh^hA%I?9r_ro$~0*Jo*-oe$b;|@@Vv5XW#b&bhJJG{>}U%;S-{j zFM9r-=W6irFPMKwc-6{BYB(Qy94%Z8KKV80KP$Xy<&7u4t1bTn^RFr|TKT9`U&MDc z_)Gwn#{5fo)yl^_@m&qR(1ZCegjcP6!V}-s;A4H54-Vk*q+0oSE!Phk<##psbYJAq zbJ~PgjlBcu6XR@y6?j*J&u`8Ky9%!wd%?#&<##ps$X3iBB)n?n)0|z3?`rVber#~G z@T!#`L1jRKM)_Uc+3|cT`D?HwFIq`gI-d184zJ}2%RViSt5F|)e)_QO zxIa}_%SYsS=!Xffx>{bJ*B%#Mb+vp<;-4tI>T3D8@Kc3Xt$fteey&FQrG#%6UbXTO z5ASO58R1jHtFD&M2|r(W)z$I^;TH(6x>{bJo4-(a)yl^_^>;Puug}}RPk7bJ=RLfu z?f8}F^FJZHKDS@_oQHQcczwSAOTw#GzTn|q4L-XqEa^Rr!mCz3ZgV%x2d)NhUt&(H zZ-iH^e8$7O8hi#XeWA3;_I&)RRzA$xrTNI!w*1?%!C>LDqLnXN?;FbRY8!uh=ErG# z(aL8%ysN>-@ejc$og%zy<=y#v9PFL>-NxUE`7<@X=u1ggnh#T+^OLLLFM@xFM(Hi_ zry6^4en}&f5;V%=YVcX%|1G>~5HTd{oxu7b#Lu0={D;D;RzBw8 zT@BteF>iL{`m0tx@8MkyUf;9QUwGBZ7d*#wEC72A@3-md0GU zBln+b?8W%cdFtZpb@_SK?xeXzSrh~9XY;g;Z;}5>-&4w3a`3aUf=ukgYc@Aw+-jCpQ}-S zeJ{_ZJ8}D~R=(hAKUag-_xbE3ylUm$_D27?8hq|DSQ_(l;Z-Z2vbh`j&(+{#motBq z@T!$hdw5ra&kH|U%P(5_J3YMW-;#Yq^02zZqi^=;hdugrk4C)C&X*sMeS;J4Ytj|( zPstbB=AF4eQ=;dRp6l>hzp(6s9!CpTqkYoCzbXDyD=*W#9ai97-C2E#A4l^6Z6!^)u>NF{Jk&!RBL?-xQ3wwjrzD6eC~SW81t?0s+o8h-q@g|^p0i8s=W6izWo$4~c-6`$$OjTM;wK;|L4%Jzi!Ec05?(d-B7Tyy zOT4SWXP#q&6NFc-e2#n|K_h++f)X_N#PirP<}~3|W3R2h&E3G~9c|0MocY;We$mRu z9ec!gHTaa+&kZdf4}gmmCt(0?`j+WC651u#uxop(v^;!#|W=l z`Fw3h-qqlv^pta?6NFc-e3bE0`CV<}3*VseMJu21@U8}*6Z_MISFL=?!@C-M>>XIr zdu)YQt^5Txcf)+3dLG$FBoC{rNaNot#2yIQy*EJ9y_J}pZx)G8i2k#Of5M|*_2~CK zdYwmi8{Dxx{XBZGM<49bV?27IM<+abnn%y}=!-o1Mvq4Oc6NTei|iY0OY-6Y(v{AS zdFj8Mcjx0z^#P*%KwBxvxi2A>oDW8qaR zpT`CztiZb(eEL6Z@U`%&u^0V6!gGFcwR=2uAJXyoIh@!A`e^zk<>PotdVVio_>AK} zO8FT7s#lPnt1zv#JW1IHjrzD6^`WQZS&J?AWPhr$7xhWm+zsvFYVdjC2MMoQ`Gkje zHTbAJVBjF(RUb*(trp9?)&{TDsgbFPN}+~!=qcf`MHuAgeved%GI-iw|Lck^Q)Ss$q}zSwSBp}4v zu2i4Mo*e&fiLd$@(v|8Xx93XbQQdo}F%er*UTo{pyL-JZr{)TtHGzovB58eSFL;w8|p9-&9`2vh7L4z+qP=W@Zn!)@J!mCC;;%7L!#Jd`NT3Cn z@I~QOSIg&w|513=$``Rg2`jXpt8M$8&-LHpVD8VXXyx7Z0`F?@i3^w?B)n?nV+c+O z8hi|b5;XXX@IMz`HS%#hWwAjCD;wX@;N$Z+{*l6~h8g%ceUOxQwT&-)LgR~8KEm!x zysN?IE@p$%g;%Y7k;9jGSA)-9!u;=qSFOASo$|Zd^7EO$LV3~3Cq4094L))y^S21E zTKP#HUiCv{kMni%)#~mid7sbxEb*1@zoeu*2mFG^qv|6_SDIhqp7OaG^~;ODwD?o4 z^$UA=SA#DIf4lIim5+FMSA#c~ar-_jylUk~cz9QLHeatGe+|N7^#|F|)$+MpncqTq z)g|8Z_o|_AiNP>;;}&qE6Y0?eE1RO z3o(wb8fKUeBcAqiHTdWg%zrJsYUSPbvhms6mIr(+$2)!$UbXTODgzQU_y`0gXz&T) zw;ImnSB-pIei&1NuEeK=-&1(i%Ez4X2j10)pL>?ee~9p^m6zdBitlRh$>q!+CA@0o z3n)A#Xv8l-P=W>@e}VavhI9Q@BOmpr_rco)4c^tAU7vX0e{nkbuXKHq{42+QpYm~k zMfKOD=W^&$e3U2axxeIU)F<*f`-_cWf2t|V)+cAZZD`OZ{F%b5RzBj1?`p))2!Dz2s+CV+gA!KbXyIz`k(FHj>x5UGC0(gMBA)(m zHT=ciWq;p_Kh=nj{)~9;H@X^p;(g{f8_E5tTKO4&*n{8K`TIP0)rXQjz8^(i3z3yEqeaI=A168~daCG@=vL7NFW#ec zj_Nm9Ur0J)b9iyBN8cj$sW;jFeoy|hlAn|OzkBjgzs`>D_sG7%iT?@dO2>EczubN& z9>)Erx|Q@?hu8LWk0-RJtI;2^&)MH&;!pJpKK|b7#X;a7{#0*!IQLJFl_6_@{LbpT z3)wfYE4$p2bfx-6zUT7YNcou0RNqUwQhlT1Q_JUS)Hg2vz7~I~VLuQoHe`kRx!UqS zaCy3o;_}2rE1v*N2^xF?f)X_Ntl0MxUN!O&e|8^QP=W^U>dxBJ`+lK4$$zExjP~aK zxk2KqzK3+B_Kc$-l(amqMtxF!*x#4pPc`gOp8{u>cvpi@gxR3S5!{}tl|Kr>DM6z> zRBuD}5oAc(!=s0j#(a^GfZ#i8KkxfCjv^lI*XsFuW>(7kB;{i~s(zVtrS>bO7W*! z%j5og1JuXW;PZPjzfgG9%BMKH6yMe0Mv{_n!8hCSLd z>4~qpK=v3f#ecEEzeR^vv;I+ZR5bi`HlBKq={Ub_NxIVUm_2~~&!c=hoEmz zDJ~M?qyDZ&{d2;9BK}mv9`$$aEAe^ZzZPD#@(J>R1Pwj`K?xf1qX%+*Hu)vjM>X;h zKTaPcXz;EEpAvpY;Z-Z208B~wgjE~j7li-0@T!$>>&bxfu6Fx#6!8t>8>>q^dI4$l z=NX>)Au*im|AWL=9sX72{>(@WEsv|w9%cmlOAwFop&FZL&kTK#{P>LUZNjToKF@fG zcQxWCM{@jgg;%Y7+QYlrmj5v3uhsI4R=()rT@Ah{_KSsAt$fnMyBd7raE||^@Tymk zo+~U?>Mw&0(c@^_)wVuIu)hIgr9VU~KZ5a6d#c`>>@mN@Wd8UW>4?~3HQJ-$ue0%Z zEZMu`vw?J_@fer#y+rvKKdRp)U8(+QDHGzO{;o#-3*s+&B>PhhdyL23JiMzrtIy%& z&#liRaUA~$;Z-Z|o*%~{9x^ClW#b>k{P7xJwDJ)cQ-TH` zfuIBpJ{)I$n((TTkMZD^7rd*%M}$9Hc-6}1u|Wwd@U8}5JeuQQuH_dEd&G~>2MHQ{ z1cDMY`0#kGWTWY6j|Sh_cz>Df8x*GX+oUUv_lT6|5W4Wi@vC|~ z>A4QC<&DWcXw=u$sBc32-6Z~0-|OSA;PK~b_=`>8_WM@+sYZOXUj`eLutIrU4Zbju z`K{tyKh>}YpT-6ytiZb(eDYZ4qr$6(J@_ZFK?y7HuI{XVeo6isEXj+LNLT8g=p>H+ zg2Y$-HtD$zujPrzJ}r-{J1fsVM|UjG!K5pdCobj5P(H?s>ibDoDo@^19#^A%Bgb?7 z%y{;vTI-X-1|_V}zODwJ`8D(XgjWrF^iP&PNXok!eEbCF_Yz*U@@d9PysN<%gdZWi z>SIY)Y7hDun@w6CS9jJw3&~%Duvpzgx>El{PUQM*HbL4`^bVvel_x4bwLGr2?IZj& z@fR1Z?UVKJt_E*T;_{p&ylUl>9^Td9lfuszUbXUR5ASLl|2G`}dW|ny`J9J$HTay^ z-!Hsslm(&>McoEs*gJ!P##y?{tyzQ? zl#X9lgHP0RdCnAG^?aZ5xID_^YWOp!u)kH}PqmiEEkAfygHHx5Sgd+>3M=|6t)&D_>;1#Jd`N zq=ETg2(McCI5sF@HI5dp2A^zX{&3+{!ye^N&<9ERgjKA;=Y>B`c-6|M9ec!gHTc97 zj^7}>>T3C-@Uw(ht^Cp0poA6TtG#FS-(R#6Rq!G9wJ)br+ld9-_HJz7p?DqZ4s^S zPd!`hm$CgE(fU5b%hmol&c8vlzCZA8&0o&>OGWGZ{hrl)xxjf%w7!4ueYJmy`Hw{F z`|&;%t?#>Ar~C@G|3-*F8(EOL#{y@!th4m4l^?hX%MC<#<>NWpWwoi)I_k*1)THp6|rD%PB*Fw?yKCTBv z>-)8qiPraJy&_uQfAvq%`aY{QqV@e$>qP7Orp$@lp8Ec%UZVAVP<5j9{Z2cG*7r5- zE?VEew2x?gpHfV;z8`6zb_49 zN?VE6_gCy8THi-8T(rJl;yBSpp4UHFbXatY@}kcct?yH~P;^Z4{~%i5cW{&Fl;qzn zIwSfa(K*r2h%Si!yJ&s>|0>b?JpYeH>+|`)60OhM5B)~Q;{a}-exmhx_WOy}=b`^f zv_9`Uq4uMhpD9|Ow|$A)%k#8v7Ol_2en_-F-}+_I`n>9oMeFmYzZ0#`lirNZ8(A_+8cW+5Z=!^?AL$6I?%i9_m2R`h3$vMCwO$de&&w)^*5_aSN3=fA>KoDee5%@0xPA0_ zQ(K7E=SS@w>+>u=6s^yv zSSMPaH(@4o`Stk`eMIZ?Ao_{c=R52qTA#PDzi55_Kuom$d-QRl_1}}9BwGJ{c&ljr z_ug|v>%X_YQndd2<%OCr|GxM>(faR$9}}(rUiAgh`tMKQQhWLLrE5j&zlZupbYA|w zMb8Eq|MGj~?L_PEe|HhBzh~V~wEmuRxM=--V_fs)_lr|R>+cQE60N@X#M?1O{0uo`F%oP(faqgoki>4-}V=+e@{DHwElhU zIL(*8cQuLDzhBK3t$&ZYRPE*OOE;^%{5|C_qV?}7Pm4Bke{!Yf%l)kXh}QcjUy2UP z_ubGGuCIPy?hjo<--pi*8Km7r$IfAWfav9-4;LN&E$2@Z9Tz=W^eoY>q8ErhSM*ZR zY0(AIH;G;^`d-nKe#h}17o8EkLiBRcZ;M_j`V-NEe$V_jqGO_aoXYi2i0&tPk?37T z=S1%>+N9XuVWOj=Cy1UZ`V`S=(Wi^fi%yANFZy!Pk#pJqjiL_}eVgcmL@yQ{6a5#_ zqeMRFd--ynOo-W#4#Qx6_-Cy)2 zqT`~k6P*-&r|5a2mx|7aeqMAz^c$LgF~|Er^sq}5Is(L(I<%>bSd-AqGO`Z7M&1%vFKT%uNA#s^dixb%h=yTqLZSZ6TLw6 z>!S0bSBox){z7#B%h_LW8n?$V(S1e7L`VK#d*1^k=T+S|4yDk9KS~N|noum#;yTS? z|IF^}AKEz5?n>5@m9*BbBs(}6&(3_S9q;VScxF~wi4eBL6gLN`0wl51l&JiPIgk>C zkU~QN0X7gCw+eySheD1TNbRO>>OjvaC23B7_ub!p-+SN8T5@K*bx7l`j6eh=~Ih(AQU=Uz?!)5MF!Um(7h_&*U}A$~&evvHqwpT7TX;%(yV>KcBD z_-_(lA^tnWcl?sR|Mw05bH%SD-u@NEhluyQOYuqKeZ+~qf4_!r5MLxdO?-*?^~AaN zYW$xk-XeZK@!iA^5}zmjkHqgL{u5&JFaAwp^9T9Y8!C?rUr>JEPi+2ot|vBo|5p&3 zeai%~*|!|9_+QlYP7s@Y%N@jK-*TtnKhXG_7XM+zZy+{%m48NT_8a#RoBsU$#HJtp zL1NR7{tU6{M}L9X^c}xq_)+EmD6!pt{i%gNrs4lv@ONRMdkYr5_Ka& z{P(u6C${fxzuYjtxBbJ0`MvEi!*^)<|Ilzr@eHwjpX5~*UeWO5#O6Q#cEj|)RwXun zYz@Qo$F^yh{@7k?nEu$_V3_{c-UR%@>u`U2tIFpc#HRoFL1NRtdWhKcsU9Wv`cZdj zdZthIVq&|`dO5NA%e#r#?u(BR+x_V(vEA=)+55b&elxN8|9p>Nj3-}b|M&p$GVzCr zA0@s-{5bLN2!=fNRb2DPeT8@g`zZPQ&%|br^1t~0-bYk^-`P_B`@W)huizIzzCWw= zTOhtbyk9W*nZ4Q(;_cTezuSmMaIP$WRSUnfT(3PF%Ui1*3lVepu`GFBpD#NW-7MspY$o`F#oT zA>tvyc>nuY-}{L7eO}YMg?JCcR|KQHmzdwX1fzWB-|uIL&0pc$iOqlDJBjz4*8Kej zag+V^W5l_emH%a8)6f5^VAR)p&uD%BSK`kRf1CIt#LodAiT?=kiv^>+7dYSDNPLC( zm5e_{`OFjVBYw4Dl-KMxHi*q1=}!?~{s&sVpCy)a68ZZV#QTUpKy3cC9w0XVOb=T) z{TKa-Vfr8XbBj-ZO3yo^`7{4sKS;cn{&gma&7au3#iu{2pCmT_RxNw~^mn-YzlqrV zp}&jR>_0wgnB)8J5t}~K*NHE@RQvn4h|T}_4{T}vx3?X;+%R$TUn+hjvH3f{h1l#3 zR*B7?;T*AjANf~^?fbePvG~_(ejYNsrtR-fiA}%c*=IF>x%)LgFC)JAZpCB7d*7*e zj`+%Z6fY8+{aMN0-=qB6_Wq5UpEp=I@x8=m@AH0Q^H2U6!}MQwg?QgvmH&SuHh+9C zILG$9srCDJiOt{OO~mFu@Fy%j{rfeE&0pg^#OBZc9Tq;P<@*id3qPpk`z-OLU)B6w zw(uE^|A!XN?;HOav3;-mdtSr(V0(L+U>OhpjlMrZyzjRa&oRE)3!Nl3{{b~(^9Qg^ zZ2k$}PP}(p^ZU!hmr9C%o%oJB6n~ufJm>$11Y`YriR;&|5^obfPP~`++kF4Z_iK88 zZd`Veb>a zRxsxG&vAZ#i(tqg&f>GYfEN_MQ5#nu& zPya>diOv7euNmg|86F@$|F>D+#Fsv%_-n)?pHcix;>({@{G4sg-yVj4FYyx(YWNMr zi64!{&e=6txwk`bAir+?j2l>5|c;6>9{I`hBe)f|VenIDt z%f#j{>x#vvKe7KwZ2r_<_>Z-`=HKfEV)J))6S4WPI!tW-w0^?gpLkYI{@Q{uzHVFn zF?YP-i0>Ft zJW70tc!v1=0S!M&{KT;05^;0C;yUpjhQH1*-+vSF#aWGipM}pTzMr@`s`w+sBR462 zkT`cx@x#RXD8FwIU--C&fA`O5`R)78HxS$RgnyLSzDIj2v3<|EM!Zb}uDgjZ5dSjq zp5Ih{ziIE&zuyDI=HKwk_WlPo{^J%-e_PMGTk~uF8DC6n{-ACkHvdwS7XGg9a0wnE zHh+XgV)Kvq8e;Qz_jAPN|L?uT`z~pEpCC5>bYCJie|?V=-@*9LdV}WQ?B8EPZ2lpK ziOs*%EV21JTP8ODVe7FbIgC*JqRioXqfovMAi{5|)L zG5+ohzCMFTGk7k87c%%*2A|B}pUmLZ46bMJnGAki2H%~*zm&oMDuX|j!C%VYKhEH9 zX7G336U**c(O%1KA|C+FZNGm=D+11;f)@HdggDPLo6%SVH)%Kb&lJEl}huK!OQ!STjjv`_@ zD5B8tt!gI?USBGg>JZt%Y7MU)*y^;jUsO>=yC^xw&YJT4k>m`j6_wcPUvvX2h&14A z^X+>?9AZ}}o^DQAcbM0*SN6A(l6DZG+?;fd-8>WF+m4^uPr_2tnLm1{(O7TiigS%) z$wsM}D>5NQIo_;bcp%u{Y$o-JPpy{t5Xe4AR}td@L|H%u<*JR{Y$c5$-$u};XE)oO z#>RYO0F6XSQ9Q6w?JSixnzf|j$|+c93JAXcs&;j~<3JcP+dq!KTv5xnxY@Bs)G}^& zNncJ%txDqzI=YsLqf)uG|dPPNt^#Bh^Z0cXhT^ejM7hgDyxG`fnFjlDjrb_0BGKCgo?7RjJiZ zZjl`HU!cJiM2B2$e=F5a5d$LT1ZjcmbLHjIN)5x=`hGrjus+yD@i}&s9y(vr!F<0` z>R);+hRoy`@@J|8s1P@C^^ziZEK0>|)`g{mSV^@?vWCJ?(@0iV+d6eH*7}SDwGG|o zkb6ajEEnH}jpSrb+r6c}aI@I~lH&s61a>UdM!o-f(ZYy~mO7=*CgxfHco@q(?0%Gz zbPlvyjg|wmYe{*1sd}o87g`#QoXyu)8yZ~05bmDl5}kpOq%78CO;)Sc^$j7+H`3KD z;-FR7Y>xC)=1fOcO^2~eKr93uavetVsseE#n8?v_W=i!6g4Tb$dg@&16dsP(o2BwP z`W2pMOP#Ut!i3aeZFeiN=4ui7U&x5B?`e%?K_ji7PFkJihFj?Loh(*`m3DLZ?B;11 znN-a4vK^i)bp|jX1iiQ1s5M%}a;dx~d#C<0E(=;67uK+4+$h!EBV^+Gx;iOZ-niY%SK&VR?AWItqD7@BMt`^;4ZSmt71Z()&~Dv80)lI!7_yCz%k5bF?MfF-*5|bh46k zma6BHoNVTIaddF(Y>anPl?`xx_XUP}Q4=dZv;H0wMlw(TaBkg)?YGQWrxN9Q)wP-NaymKL7sa6JXs&g#`5_cab#rX`;(#u#oaBWJBq}+-wA*u#<~KO);UqIkIFu#$7}c&QplIxcMx&WW5&=Ti{hKICnyRPbZBNEC=~JGH zC!?iNr{wVfMKU@O6nt)0pb3aUA|DmB{5v-*xze{!91zM0sQ}EAbM2-K!0vgml~fis zH%b~}$i>EP1%b0`7^h2;y~QbC`>uvNvO#PY8#o~?t+YqnzoWTgyIiZ{?pps3(G!NR z$B9YX2}7l6#h5X?FkQG8r$Z*ZFi11)-x9GePWjgq+Ivx;$Q@C;8jYv2~7BUQKZ4aJPZbNHd%DN-c3w56gvxLjn`-kLRm^lvyF`v9LZFc)=KqyqmEm)7OpKV&k)8E4o|XDz?Pv}*(}xE zZV#I$NzTqKUD^hGRkd@Q&9>Y@RO_d9WzY)PNhdh2+>>LcRu)j)#S+Yo`WAM;V*tIH z2Q8M87j&el<$V&u zgS4gE3Zn1Ef7Q)jmZx;XZs81OX_V!K>B(3HmE(8?QFmd+vimy4$&?K@OsIj81IHo>!l+=EK9(mi~Wy3#0RLkl37* z!cpB5Uv-zeII~rqp}u<$ZVphyVO*);e^s8IAE=l8-W|t*t z8elHRIGGTgCEU)4_L79+grU)@o@>-QhS6xig?dYNc@=E-(+zzpN7ul*YFXM}T0<^Q z3Z3W?Ax*?6D5m5rJ(dUvJeeRRJe){t5s6y;=_9I0&jLVpVgPwLtwxVnmB2_pu23n8 zNinJK;!fT(ZLBb&71JLsH*;-zJ(j@vCIZ$Yvs`s5lG{qrJTu-G(>WaIRe-G5l zvIN!LXWuy}QIA==9a7f&`*dduk}74Agw10UmqDs`{Hn&v07T%G5w*Pi-UlOHoI1;*3pD3GN-tS zaUtaGl+AO+fJ9mOcl)mtubWUFoYuomr4BFugF<2Df~LPPTdI{eYfzp&(C)y_p_3eJ zv}Q#K!`*?KI>}LXh#<=^&Kd)$=Y68e}M4NOoN~EO1xf zP^dCvfxgEMUna-lM5$I4HEZRRE2DCDwYXr%@xnLSh2(TnlU6c-_Q&$*tmh6uC1LF) z$_AQ&DLjb7VvHcdT3$)vJhm(mfj4MD3@oHq-PP$X%8v|1f|pudT6a$H)PKfJ$E5yeE6v?G+un>cNAI{%QhkkC3QRhfmbNyEax!Tpsxp@gpl(Pk3uB4vSll*H(ktpoLPdI#j9fs(xi zis{|)BZ;`xS1gQ_iCmNVeW4snT>Toj@8RGYm!_$ukeKtd&`Ctkb^wix7Ei?`k^d5m zUsT@+Q#nSabIEc8mU~V;7Yzk9YZnx*8~0s!H#}(lBW+2Odt?|ch*pAWPN6w6oc%tC zEgR@Xc@yz1*VZIl?j;~s#Bqu=_r+2h1%Zh~pahEspmD$kYOFfcfN1)z`*B|d?aZ08 z9cVEpEzy>(+@<|Sv|b%EJm8F56PU=Qb7G(8bBV07uWh}X^0Wn@Kb>-QJD4S4$^{EQ zIePQ=TH$g=hIr3ic84&|Q03$WPqtN#suemTJ ztl1jWbDM<{sF*BCLT35s1JT+v1kK73RoU|F#!3TMm$IoTp?B=!yy981D(9I6^gd*@ z?{4RlM;$^Smim!%Sbj<)kEo8a+&FU1Q6VaKHh27l>igq$kmSPGf|rt08wt!p!j#=k zkaM_kJJvvVOh~k3$9<|6P3?g!ah?ly#X15*Vw@Uoh(QsJ9D{->J<5@9L&gVV+$q^{ zyI9c85>+H*u5VdiWABa3g)sI={sv$#B;$wK3rU3_Wv9O@mPo0bK-B{Y<;aM7Afcot z^cfl*m5NPazmAjZL|s6fRZ4PTO$$p8jH!Z zP!x&c>3oL4Ukoa_$_`Rzz^;u|*ag7wkW-V4{yO4wvDSCr)a21KG4#XY=y0jis&2Vq z`EY4Hkp-f^7{Z7qG~Sx%3aVZYQZ8KYaS4~Z5zFnW8NjI zv$eO>fP{D(b~34+TI*08F6#W~gv_o!?z%>~O#|KhY+>!QxMSPe#W{ft+43-~$k>YY zqmI%8*bVs-aSC(^_unx5$)vNLk|Ak!s4z61ht6F`_E)iwOGi=( z%q6QOC^Feb8XYh)d=;4~VQ0(PzH@ku5^_e5Y#<9dbq~VqEWt`NwWr*Wl@o3;8={;g zyDpd$q9d!dSsQw!BEtc6=%L}Y@Oav7goPJO7li{xU^(`1+dX&mez?@eZc|I`s7D%% z?%FNo;XF119V~QYf_QW6r3$ziCAI1}t=_S-^>D z4J=OL=FRkwg&jyb@GN-#s0#XdlF>$Q2YucgsZpx91GMxE0IdcW6q^I7g&^<##7|7! zlZvu{eR;K`{cl||2+ikXrMg(j3lvu}4uzL{PhVYzTx=|K!wm)3>I}KCK2s(- zTdumJ^S-Z?pQPCu2PvjMlS}N3eh{tJIG~7g4LItmRB=9phU@MG3?Ii$TTHPSa}87P zGK%5!9iv!`xkjo4X0()&zL(N0mW)aIj1DBgBDZs9^ZxWTJL4dA!FdO3^W+%3J(Su5 z>4nAtbs;Isxv4wm97H`^+UVZQyv(tj)0Z1MrCX42cQ?@3<<+WXInfPD>_V_T))2QN zEY{@0uw8_OR=@M;lk|ozR#Fvni6i4W#NCbdxh_%eU5v^(96!nizwd+QCn=t1A;r=u zS$Pg>Nb?NPz@qfsS(bA-7n1dKw~HJeq40DAuI6O%Fo<^Q^SGAltl?gu@-((5GB9zU zY_!%Bm_hZcLakNobMHj0X&*2zZ3-7koAol!z?8Cdw$8dyyzE4v7hqB~N`=&M)8N=V zjndKdO*l)X)#Pxg1|NlksAbE$lZ_+|1qVr5)*)w9Q*9u8c3caRiIfft7+g7GeKUxH zMFo(gk*?dyYP)hvIZr}8ir^XLH3st;g{!vmRcxPGTZh~Y$`TssaYDuUfrJEmF5B$ID6U0}pS|oU#FonLfQ7G*i zOgAhF^ZpI|tN-`>9i&$JBca89@Qgbjxe9Zx3C4ow@!)xvTm?K;PXId^%?I|BX6u_; zUk0X>DNziOdq(X+jg6-RUe1)cI~AlI8Blw(>NKj7qMZ3yK@NPhE?S(Y^j(=hIsGOryh2=F3^LjoCg1!P{q;aO~z8Q4!gv&<>gz|n4}-DQ!#)OP5vZta*A zf(p%+PfqDaNzVY=Ft-lHc09Fn>SavQZ7YykjXVWo3Pg=8AFjbzp-ZXzX;Q`Z+C!1{ zbZ|?G)w#Q=dWs6Vvg((aoT?c;^kjEZiAj(D+yZHIu^e5iCnmSjfW-Q3|KT z5m5>!M_~f(VPRw%OC1l##|zQBlW|hxlW>WYMxLAwlNz6zm<~gy$D)*{3sK}koU4fu ztjc`Kh4GOvslw=FScF18AC|W;66FdBhoR$R`S9I5mH`2y{MdBJXlyJ~-h7y=vHYZ5 zS*z~4{0}L~|G-ZEhcI6Na0y{yWGu|Y_}Ek=nyINM6O;K!Qd4nKg^?(!LX=ctq!1P! zf(zmJv^bRUnJkP=hq5S)$M23sg&!}-wkCadA`)w1VkBxe(_>+Y&@!U(#zG$-pNz^| z7!5OtOhs*OB2IZ?BFxqJ)Og5uVzdy-sxU3;1-=O56H&VvpMV$cG<0fgJbZU@I%<)V z=YAJ50x7@Y|Dju+y03lZP3f+$h=Y>bajh3yrMA(RG& zg;0|4Iv(X21rCxz!ePp2Wnra^74lJ1g=o|mE5t>ZiV8S39+zk;YV8vvQz74pd_2UA zOh$RmN0l-H>9J7GW1|ycg^rCxv*1`p&eKs3&AWc&KcfY8sNNrm z>Zz)FHO05$`jdPz;>o{CAP0iG;MF`;)m8WDp$RiIadAw#gZWr$XObq-r?xNkb+M2W z4QI^gUVqo?oI++!Gtp@yJ{2{#P(>$up^~{K(B*}E5Tdy552KJBZ(eyV#+BYZRPYv^ z^?1s)nQ3-k;rG&YF%1M+L^^lE zbE*!n!0o^MV`{IY2mbt!iGaX=3e*eG^4v>VE!^NcD&7&5L{x{;&aIt$QL&zzXt<7W zc$S-?K-U?XkLG4X-UOr>sRGxucCfyR+`;rP$O?0abhDXENj{$->7{6tbZFScJZ2Q> zNlj0?o%oQNosL(HAT2IRTnK5k;1zFLi)R@LLKjygsZEC^DUl*qS+;494A!2i6}U4& zjB@HKEzF(2Ch(;rh3>PFTes(BMxnlzeiqTyZtURTK=j>2L`a=4xfD`pe!^mJ22u$D zMSEsSkP{Kaz`=$2>NiL;YFRchLTXr@64LkWn;4AkKR1M=qf2ysH@$fG&BO8WNTp{j zB@Ck+vnD1;cRn&Kk&L9LlP-l6ny{pyVc?^3t$PI&Q{$5q1p2R73Yw3y-Gis(uVScHd!ass?a>^lRTxsbh4BkkOjDx)+>K&N z-geND&0G{JFxx&{btM}p;-8!^)o zU?r6Lz*K-eFY<$DbDW7s=Ni>f;TOkW#?aE%=unl8{N+XKtn-Uvp4 zlewB%Y6A4BkUBrW8!l4D%R=B;0Wo5;TUV&i6GK%#5aTChWfaqNqR!lL1ramrAu0XN zpD`3WDxG{&Dbc<#9jHTtL&>oEEKO@D<6|4BN^yoNftGZ_Xyx2 z9Ui2($17P95)Km;mAfqN@k*A28VlcY6==EDIaP!8+2`Ct@>CqSa0uTD$UUR`lEkT` zB~p4OS|+&5%1(PB+NB6yHg=G1*o-i4sl2@@posE_4Vq3iqi?i51vfxVHlH z4q{oMSmRC2>|9{lUX>*lgQ1^H7e_5sG6pZw3G@{W?lypNc@3ka7BLVhW==nXVGP~* z3p|+Vcd}8%eH7fxK{>kE>cG2AvAA+BX<;TT7B`ZOa`SAlyap@tVzJ%9eoH`cwN!;0 z`;c-9t`_0T9?igQ)K^`TuQlNA1OLdK*9Jp0N#JB-qj4H-1`lmnnl`1npzbdgPH?GO zufTMUh8YpH>LeDC+VTl%WGEt@DT!n~$!&F0d}pJIqFU(2W+&O|=BMPCq0&@wD1Lpj auGG8QV)#`#TdP1~n=3_pR!KfB`+opHE)mlJ literal 0 HcmV?d00001 diff --git a/src/SDL2/Xcode/Info-Framework.plist b/src/SDL2/Xcode/Info-Framework.plist new file mode 100644 index 000000000..9332f7f0c --- /dev/null +++ b/src/SDL2/Xcode/Info-Framework.plist @@ -0,0 +1,22 @@ + + + + + CFBundleDevelopmentRegion + English + CFBundleExecutable + SDL2_image + CFBundleIdentifier + org.libsdl.SDL2-image + CFBundleInfoDictionaryVersion + 6.0 + CFBundleName + SDL2_image + CFBundlePackageType + FMWK + CFBundleShortVersionString + 2.0.0 + CFBundleVersion + 2.0.0 + + diff --git a/src/SDL2/Xcode/SDL_image.xcodeproj/project.pbxproj b/src/SDL2/Xcode/SDL_image.xcodeproj/project.pbxproj new file mode 100755 index 000000000..6b5c366ac --- /dev/null +++ b/src/SDL2/Xcode/SDL_image.xcodeproj/project.pbxproj @@ -0,0 +1,753 @@ +// !$*UTF8*$! +{ + archiveVersion = 1; + classes = { + }; + objectVersion = 46; + objects = { + +/* Begin PBXBuildFile section */ + 007288A80F0DA79800C302A9 /* ApplicationServices.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = 007288A60F0DA79800C302A9 /* ApplicationServices.framework */; }; + AA579DF2161C07E6005F809B /* IMG_bmp.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE2161C07E6005F809B /* IMG_bmp.c */; }; + AA579DF3161C07E7005F809B /* IMG_bmp.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE2161C07E6005F809B /* IMG_bmp.c */; }; + AA579DF4161C07E7005F809B /* IMG_gif.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE3161C07E6005F809B /* IMG_gif.c */; }; + AA579DF5161C07E7005F809B /* IMG_gif.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE3161C07E6005F809B /* IMG_gif.c */; }; + AA579DF6161C07E7005F809B /* IMG_ImageIO.m in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE4161C07E6005F809B /* IMG_ImageIO.m */; }; + AA579DF7161C07E7005F809B /* IMG_ImageIO.m in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE4161C07E6005F809B /* IMG_ImageIO.m */; }; + AA579DF8161C07E7005F809B /* IMG_jpg.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE5161C07E6005F809B /* IMG_jpg.c */; }; + AA579DF9161C07E7005F809B /* IMG_jpg.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE5161C07E6005F809B /* IMG_jpg.c */; }; + AA579DFA161C07E7005F809B /* IMG_lbm.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE6161C07E6005F809B /* IMG_lbm.c */; }; + AA579DFB161C07E7005F809B /* IMG_lbm.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE6161C07E6005F809B /* IMG_lbm.c */; }; + AA579DFC161C07E7005F809B /* IMG_pcx.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE7161C07E6005F809B /* IMG_pcx.c */; }; + AA579DFD161C07E7005F809B /* IMG_pcx.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE7161C07E6005F809B /* IMG_pcx.c */; }; + AA579DFE161C07E7005F809B /* IMG_png.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE8161C07E6005F809B /* IMG_png.c */; }; + AA579DFF161C07E7005F809B /* IMG_png.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE8161C07E6005F809B /* IMG_png.c */; }; + AA579E00161C07E7005F809B /* IMG_pnm.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE9161C07E6005F809B /* IMG_pnm.c */; }; + AA579E01161C07E7005F809B /* IMG_pnm.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DE9161C07E6005F809B /* IMG_pnm.c */; }; + AA579E02161C07E7005F809B /* IMG_tga.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DEA161C07E6005F809B /* IMG_tga.c */; }; + AA579E03161C07E7005F809B /* IMG_tga.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DEA161C07E6005F809B /* IMG_tga.c */; }; + AA579E04161C07E7005F809B /* IMG_tif.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DEB161C07E6005F809B /* IMG_tif.c */; }; + AA579E05161C07E7005F809B /* IMG_tif.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DEB161C07E6005F809B /* IMG_tif.c */; }; + AA579E06161C07E7005F809B /* IMG_webp.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DEC161C07E6005F809B /* IMG_webp.c */; }; + AA579E07161C07E7005F809B /* IMG_webp.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DEC161C07E6005F809B /* IMG_webp.c */; }; + AA579E08161C07E7005F809B /* IMG_xcf.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DED161C07E6005F809B /* IMG_xcf.c */; }; + AA579E09161C07E7005F809B /* IMG_xcf.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DED161C07E6005F809B /* IMG_xcf.c */; }; + AA579E0A161C07E7005F809B /* IMG_xpm.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DEE161C07E6005F809B /* IMG_xpm.c */; }; + AA579E0B161C07E7005F809B /* IMG_xpm.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DEE161C07E6005F809B /* IMG_xpm.c */; }; + AA579E0C161C07E7005F809B /* IMG_xv.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DEF161C07E6005F809B /* IMG_xv.c */; }; + AA579E0D161C07E7005F809B /* IMG_xv.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DEF161C07E6005F809B /* IMG_xv.c */; }; + AA579E0E161C07E7005F809B /* IMG_xxx.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DF0161C07E6005F809B /* IMG_xxx.c */; }; + AA579E0F161C07E7005F809B /* IMG_xxx.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DF0161C07E6005F809B /* IMG_xxx.c */; }; + AA579E10161C07E7005F809B /* IMG.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DF1161C07E6005F809B /* IMG.c */; }; + AA579E11161C07E7005F809B /* IMG.c in Sources */ = {isa = PBXBuildFile; fileRef = AA579DF1161C07E6005F809B /* IMG.c */; }; + AADBAC88175C6AAB004F8ED2 /* webp.framework in Copy Frameworks */ = {isa = PBXBuildFile; fileRef = AA9EE77514B27A62008773C0 /* webp.framework */; }; + AADBAC89175C6B4C004F8ED2 /* ApplicationServices.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = 007288A60F0DA79800C302A9 /* ApplicationServices.framework */; }; + AADBAC8A175C6B4F004F8ED2 /* Foundation.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = 61F85449145A19BC002CA294 /* Foundation.framework */; }; + BE1FA71A07AF4C44004B6283 /* SDL_image.h in Headers */ = {isa = PBXBuildFile; fileRef = 1014BAEA010A4B677F000001 /* SDL_image.h */; settings = {ATTRIBUTES = (Public, ); }; }; + BE1FA76307AF7335004B6283 /* SDL2.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = BE1FA76207AF7335004B6283 /* SDL2.framework */; }; +/* End PBXBuildFile section */ + +/* Begin PBXContainerItemProxy section */ + BE1FA74C07AF4C45004B6283 /* PBXContainerItemProxy */ = { + isa = PBXContainerItemProxy; + containerPortal = 0867D690FE84028FC02AAC07 /* Project object */; + proxyType = 1; + remoteGlobalIDString = BE1FA71807AF4C44004B6283; + remoteInfo = Framework; + }; +/* End PBXContainerItemProxy section */ + +/* Begin PBXCopyFilesBuildPhase section */ + AA9EE77214B27810008773C0 /* Copy Frameworks */ = { + isa = PBXCopyFilesBuildPhase; + buildActionMask = 2147483647; + dstPath = ""; + dstSubfolderSpec = 10; + files = ( + AADBAC88175C6AAB004F8ED2 /* webp.framework in Copy Frameworks */, + ); + name = "Copy Frameworks"; + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXCopyFilesBuildPhase section */ + +/* Begin PBXFileReference section */ + 007288A60F0DA79800C302A9 /* ApplicationServices.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = ApplicationServices.framework; path = /System/Library/Frameworks/ApplicationServices.framework; sourceTree = ""; }; + 1014BAEA010A4B677F000001 /* SDL_image.h */ = {isa = PBXFileReference; fileEncoding = 30; lastKnownFileType = sourcecode.c.h; name = SDL_image.h; path = ../SDL_image.h; sourceTree = SOURCE_ROOT; }; + 61F85449145A19BC002CA294 /* Foundation.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = Foundation.framework; path = System/Library/Frameworks/Foundation.framework; sourceTree = SDKROOT; }; + AA579DE2161C07E6005F809B /* IMG_bmp.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_bmp.c; path = ../IMG_bmp.c; sourceTree = ""; }; + AA579DE3161C07E6005F809B /* IMG_gif.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_gif.c; path = ../IMG_gif.c; sourceTree = ""; }; + AA579DE4161C07E6005F809B /* IMG_ImageIO.m */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.objc; name = IMG_ImageIO.m; path = ../IMG_ImageIO.m; sourceTree = ""; }; + AA579DE5161C07E6005F809B /* IMG_jpg.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_jpg.c; path = ../IMG_jpg.c; sourceTree = ""; }; + AA579DE6161C07E6005F809B /* IMG_lbm.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_lbm.c; path = ../IMG_lbm.c; sourceTree = ""; }; + AA579DE7161C07E6005F809B /* IMG_pcx.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_pcx.c; path = ../IMG_pcx.c; sourceTree = ""; }; + AA579DE8161C07E6005F809B /* IMG_png.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_png.c; path = ../IMG_png.c; sourceTree = ""; }; + AA579DE9161C07E6005F809B /* IMG_pnm.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_pnm.c; path = ../IMG_pnm.c; sourceTree = ""; }; + AA579DEA161C07E6005F809B /* IMG_tga.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_tga.c; path = ../IMG_tga.c; sourceTree = ""; }; + AA579DEB161C07E6005F809B /* IMG_tif.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_tif.c; path = ../IMG_tif.c; sourceTree = ""; }; + AA579DEC161C07E6005F809B /* IMG_webp.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_webp.c; path = ../IMG_webp.c; sourceTree = ""; }; + AA579DED161C07E6005F809B /* IMG_xcf.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_xcf.c; path = ../IMG_xcf.c; sourceTree = ""; }; + AA579DEE161C07E6005F809B /* IMG_xpm.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_xpm.c; path = ../IMG_xpm.c; sourceTree = ""; }; + AA579DEF161C07E6005F809B /* IMG_xv.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_xv.c; path = ../IMG_xv.c; sourceTree = ""; }; + AA579DF0161C07E6005F809B /* IMG_xxx.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG_xxx.c; path = ../IMG_xxx.c; sourceTree = ""; }; + AA579DF1161C07E6005F809B /* IMG.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = IMG.c; path = ../IMG.c; sourceTree = ""; }; + AA9EE77514B27A62008773C0 /* webp.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = webp.framework; path = Frameworks/webp.framework; sourceTree = ""; }; + BE1FA72D07AF4C44004B6283 /* Info-Framework.plist */ = {isa = PBXFileReference; lastKnownFileType = text.plist.xml; path = "Info-Framework.plist"; sourceTree = ""; }; + BE1FA72E07AF4C45004B6283 /* SDL2_image.framework */ = {isa = PBXFileReference; explicitFileType = wrapper.framework; includeInIndex = 0; path = SDL2_image.framework; sourceTree = BUILT_PRODUCTS_DIR; }; + BE1FA74107AF4C45004B6283 /* libSDL2_image.a */ = {isa = PBXFileReference; explicitFileType = archive.ar; includeInIndex = 0; path = libSDL2_image.a; sourceTree = BUILT_PRODUCTS_DIR; }; + BE1FA74507AF4C45004B6283 /* Create DMG */ = {isa = PBXFileReference; explicitFileType = "compiled.mach-o.executable"; includeInIndex = 0; path = "Create DMG"; sourceTree = BUILT_PRODUCTS_DIR; }; + BE1FA76207AF7335004B6283 /* SDL2.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = SDL2.framework; path = /Library/Frameworks/SDL2.framework; sourceTree = ""; }; + F59C710300D5CB5801000001 /* ReadMe.txt */ = {isa = PBXFileReference; fileEncoding = 30; lastKnownFileType = text; path = ReadMe.txt; sourceTree = ""; }; + F59C710400D5CB5801000001 /* Welcome.txt */ = {isa = PBXFileReference; fileEncoding = 30; lastKnownFileType = text; path = Welcome.txt; sourceTree = ""; }; + F59C710600D5CB5801000001 /* SDL_image.info */ = {isa = PBXFileReference; fileEncoding = 30; lastKnownFileType = text; path = SDL_image.info; sourceTree = ""; }; +/* End PBXFileReference section */ + +/* Begin PBXFrameworksBuildPhase section */ + BE1FA72A07AF4C44004B6283 /* Frameworks */ = { + isa = PBXFrameworksBuildPhase; + buildActionMask = 2147483647; + files = ( + AADBAC89175C6B4C004F8ED2 /* ApplicationServices.framework in Frameworks */, + AADBAC8A175C6B4F004F8ED2 /* Foundation.framework in Frameworks */, + BE1FA76307AF7335004B6283 /* SDL2.framework in Frameworks */, + ); + runOnlyForDeploymentPostprocessing = 0; + }; + BE1FA73F07AF4C45004B6283 /* Frameworks */ = { + isa = PBXFrameworksBuildPhase; + buildActionMask = 2147483647; + files = ( + 007288A80F0DA79800C302A9 /* ApplicationServices.framework in Frameworks */, + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXFrameworksBuildPhase section */ + +/* Begin PBXGroup section */ + 0153844A006D81B07F000001 /* Public Headers */ = { + isa = PBXGroup; + children = ( + 1014BAEA010A4B677F000001 /* SDL_image.h */, + ); + name = "Public Headers"; + sourceTree = ""; + }; + 034768DDFF38A45A11DB9C8B /* Products */ = { + isa = PBXGroup; + children = ( + 089C1665FE841158C02AAC07 /* Resources */, + BE1FA72E07AF4C45004B6283 /* SDL2_image.framework */, + BE1FA74107AF4C45004B6283 /* libSDL2_image.a */, + BE1FA74507AF4C45004B6283 /* Create DMG */, + ); + name = Products; + sourceTree = ""; + }; + 0867D691FE84028FC02AAC07 /* SDL_imageFramework */ = { + isa = PBXGroup; + children = ( + F59C70FC00D5CB5801000001 /* pkg-support */, + 0153844A006D81B07F000001 /* Public Headers */, + 08FB77ACFE841707C02AAC07 /* Library Source */, + BE1FA76107AF72F5004B6283 /* Frameworks */, + 034768DDFF38A45A11DB9C8B /* Products */, + BE1FA72D07AF4C44004B6283 /* Info-Framework.plist */, + ); + name = SDL_imageFramework; + sourceTree = ""; + }; + 089C1665FE841158C02AAC07 /* Resources */ = { + isa = PBXGroup; + children = ( + ); + name = Resources; + sourceTree = ""; + }; + 08FB77ACFE841707C02AAC07 /* Library Source */ = { + isa = PBXGroup; + children = ( + AA579DE2161C07E6005F809B /* IMG_bmp.c */, + AA579DE3161C07E6005F809B /* IMG_gif.c */, + AA579DE4161C07E6005F809B /* IMG_ImageIO.m */, + AA579DE5161C07E6005F809B /* IMG_jpg.c */, + AA579DE6161C07E6005F809B /* IMG_lbm.c */, + AA579DE7161C07E6005F809B /* IMG_pcx.c */, + AA579DE8161C07E6005F809B /* IMG_png.c */, + AA579DE9161C07E6005F809B /* IMG_pnm.c */, + AA579DEA161C07E6005F809B /* IMG_tga.c */, + AA579DEB161C07E6005F809B /* IMG_tif.c */, + AA579DEC161C07E6005F809B /* IMG_webp.c */, + AA579DED161C07E6005F809B /* IMG_xcf.c */, + AA579DEE161C07E6005F809B /* IMG_xpm.c */, + AA579DEF161C07E6005F809B /* IMG_xv.c */, + AA579DF0161C07E6005F809B /* IMG_xxx.c */, + AA579DF1161C07E6005F809B /* IMG.c */, + ); + name = "Library Source"; + sourceTree = ""; + }; + BE1FA76007AF72B1004B6283 /* Linked Frameworks */ = { + isa = PBXGroup; + children = ( + 007288A60F0DA79800C302A9 /* ApplicationServices.framework */, + 61F85449145A19BC002CA294 /* Foundation.framework */, + BE1FA76207AF7335004B6283 /* SDL2.framework */, + AA9EE77514B27A62008773C0 /* webp.framework */, + ); + name = "Linked Frameworks"; + sourceTree = ""; + }; + BE1FA76107AF72F5004B6283 /* Frameworks */ = { + isa = PBXGroup; + children = ( + BE1FA76007AF72B1004B6283 /* Linked Frameworks */, + ); + name = Frameworks; + sourceTree = ""; + }; + F59C70FC00D5CB5801000001 /* pkg-support */ = { + isa = PBXGroup; + children = ( + F59C710100D5CB5801000001 /* resources */, + F59C710600D5CB5801000001 /* SDL_image.info */, + ); + path = "pkg-support"; + sourceTree = SOURCE_ROOT; + }; + F59C710100D5CB5801000001 /* resources */ = { + isa = PBXGroup; + children = ( + F59C710300D5CB5801000001 /* ReadMe.txt */, + F59C710400D5CB5801000001 /* Welcome.txt */, + ); + path = resources; + sourceTree = ""; + }; +/* End PBXGroup section */ + +/* Begin PBXHeadersBuildPhase section */ + BE1FA71907AF4C44004B6283 /* Headers */ = { + isa = PBXHeadersBuildPhase; + buildActionMask = 2147483647; + files = ( + BE1FA71A07AF4C44004B6283 /* SDL_image.h in Headers */, + ); + runOnlyForDeploymentPostprocessing = 0; + }; + BE1FA73007AF4C45004B6283 /* Headers */ = { + isa = PBXHeadersBuildPhase; + buildActionMask = 2147483647; + files = ( + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXHeadersBuildPhase section */ + +/* Begin PBXNativeTarget section */ + BE1FA71807AF4C44004B6283 /* Framework */ = { + isa = PBXNativeTarget; + buildConfigurationList = 00B7E3AA097EB73D00826121 /* Build configuration list for PBXNativeTarget "Framework" */; + buildPhases = ( + BE1FA71907AF4C44004B6283 /* Headers */, + BE1FA71B07AF4C44004B6283 /* Resources */, + BE1FA71C07AF4C44004B6283 /* Sources */, + BE1FA72A07AF4C44004B6283 /* Frameworks */, + BE1FA72B07AF4C44004B6283 /* Rez */, + AA9EE77214B27810008773C0 /* Copy Frameworks */, + AA9EE77314B2782A008773C0 /* Create Frameworks symlink */, + AA9EE77414B27854008773C0 /* Convert SDL includes to SDL Framework includes */, + AA5C3FDD17A8C97A00D6C8A1 /* Sign Frameworks */, + ); + buildRules = ( + ); + comments = "Installed into ~/Library/Frameworks/SDL_image.framework\n\nAdd -framework SDL_image to your linker flags\nAdd ~/Library/Frameworks/SDL_image.framework/Headers to your header search path\nAdd ~/Library/Frameworks to your library search path"; + dependencies = ( + ); + name = Framework; + productInstallPath = "@executable_path/../Frameworks"; + productName = SDL_image; + productReference = BE1FA72E07AF4C45004B6283 /* SDL2_image.framework */; + productType = "com.apple.product-type.framework"; + }; + BE1FA72F07AF4C45004B6283 /* Static Library */ = { + isa = PBXNativeTarget; + buildConfigurationList = 00B7E3AE097EB73D00826121 /* Build configuration list for PBXNativeTarget "Static Library" */; + buildPhases = ( + BE1FA73007AF4C45004B6283 /* Headers */, + BE1FA73107AF4C45004B6283 /* Sources */, + BE1FA73F07AF4C45004B6283 /* Frameworks */, + BE1FA74007AF4C45004B6283 /* Rez */, + ); + buildRules = ( + ); + dependencies = ( + ); + name = "Static Library"; + productInstallPath = /usr/local/lib; + productName = "Static Library"; + productReference = BE1FA74107AF4C45004B6283 /* libSDL2_image.a */; + productType = "com.apple.product-type.library.static"; + }; + BE1FA74207AF4C45004B6283 /* Create DMG */ = { + isa = PBXNativeTarget; + buildConfigurationList = 00B7E3B2097EB73D00826121 /* Build configuration list for PBXNativeTarget "Create DMG" */; + buildPhases = ( + BE1FA74407AF4C45004B6283 /* ShellScript */, + ); + buildRules = ( + ); + dependencies = ( + BE1FA74D07AF4C45004B6283 /* PBXTargetDependency */, + ); + name = "Create DMG"; + productInstallPath = /usr/local/bin; + productName = "Standard Package"; + productReference = BE1FA74507AF4C45004B6283 /* Create DMG */; + productType = "com.apple.product-type.tool"; + }; +/* End PBXNativeTarget section */ + +/* Begin PBXProject section */ + 0867D690FE84028FC02AAC07 /* Project object */ = { + isa = PBXProject; + attributes = { + LastUpgradeCheck = 0420; + }; + buildConfigurationList = 00B7E3B6097EB73D00826121 /* Build configuration list for PBXProject "SDL_image" */; + compatibilityVersion = "Xcode 3.2"; + developmentRegion = English; + hasScannedForEncodings = 1; + knownRegions = ( + English, + Japanese, + French, + German, + ); + mainGroup = 0867D691FE84028FC02AAC07 /* SDL_imageFramework */; + productRefGroup = 034768DDFF38A45A11DB9C8B /* Products */; + projectDirPath = ""; + projectRoot = ..; + targets = ( + BE1FA71807AF4C44004B6283 /* Framework */, + BE1FA72F07AF4C45004B6283 /* Static Library */, + BE1FA74207AF4C45004B6283 /* Create DMG */, + ); + }; +/* End PBXProject section */ + +/* Begin PBXResourcesBuildPhase section */ + BE1FA71B07AF4C44004B6283 /* Resources */ = { + isa = PBXResourcesBuildPhase; + buildActionMask = 2147483647; + files = ( + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXResourcesBuildPhase section */ + +/* Begin PBXRezBuildPhase section */ + BE1FA72B07AF4C44004B6283 /* Rez */ = { + isa = PBXRezBuildPhase; + buildActionMask = 2147483647; + files = ( + ); + runOnlyForDeploymentPostprocessing = 0; + }; + BE1FA74007AF4C45004B6283 /* Rez */ = { + isa = PBXRezBuildPhase; + buildActionMask = 2147483647; + files = ( + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXRezBuildPhase section */ + +/* Begin PBXShellScriptBuildPhase section */ + AA5C3FDD17A8C97A00D6C8A1 /* Sign Frameworks */ = { + isa = PBXShellScriptBuildPhase; + buildActionMask = 2147483647; + files = ( + ); + inputPaths = ( + ); + name = "Sign Frameworks"; + outputPaths = ( + ); + runOnlyForDeploymentPostprocessing = 0; + shellPath = /bin/sh; + shellScript = "if [ \"$USER\" = \"slouken\" ]; then\n CODE_SIGN_IDENTITY=\"Mac Developer: Sam Lantinga (84TP7N5TA4)\" pkg-support/codesign-frameworks.sh || exit 1\nfi"; + }; + AA9EE77314B2782A008773C0 /* Create Frameworks symlink */ = { + isa = PBXShellScriptBuildPhase; + buildActionMask = 2147483647; + files = ( + ); + inputPaths = ( + ); + name = "Create Frameworks symlink"; + outputPaths = ( + ); + runOnlyForDeploymentPostprocessing = 0; + shellPath = /bin/sh; + shellScript = "cd $SYMROOT/$CONFIGURATION/$FULL_PRODUCT_NAME\nif ! [ -L Frameworks ]; then\n rm -f Frameworks\n ln -s Versions/Current/Frameworks Frameworks\nfi"; + }; + AA9EE77414B27854008773C0 /* Convert SDL includes to SDL Framework includes */ = { + isa = PBXShellScriptBuildPhase; + buildActionMask = 2147483647; + files = ( + ); + inputPaths = ( + ); + name = "Convert SDL includes to SDL Framework includes"; + outputPaths = ( + ); + runOnlyForDeploymentPostprocessing = 0; + shellPath = /bin/sh; + shellScript = "cd $SYMROOT/$CONFIGURATION/$PUBLIC_HEADERS_FOLDER_PATH\nHEADER=SDL_image.h\nsed 's,#include \"\\(.*\\)\",#include ,' <$HEADER >$HEADER.new\nmv $HEADER.new $HEADER"; + }; + BE1FA74407AF4C45004B6283 /* ShellScript */ = { + isa = PBXShellScriptBuildPhase; + buildActionMask = 2147483647; + files = ( + ); + runOnlyForDeploymentPostprocessing = 0; + shellPath = /bin/sh; + shellScript = "# clean up the framework, remove headers, extra files\nPRODUCT_NAME=SDL2_image\nmkdir -p build/dmg-tmp\n`xcode-select -print-path`/Tools/CpMac -r $TARGET_BUILD_DIR/$PRODUCT_NAME.framework build/dmg-tmp/\ncp pkg-support/resources/ReadMe.txt build/dmg-tmp\n\n# remove the .DS_Store files if any (we may want to provide one in the future for fancy .dmgs)\nrm -rf build/dmg-tmp/.DS_Store\n\n# create the dmg\nhdiutil create -ov -fs HFS+ -volname $PRODUCT_NAME -srcfolder build/dmg-tmp build/$PRODUCT_NAME.dmg\n\n# clean up\nrm -rf build/dmg-tmp"; + }; +/* End PBXShellScriptBuildPhase section */ + +/* Begin PBXSourcesBuildPhase section */ + BE1FA71C07AF4C44004B6283 /* Sources */ = { + isa = PBXSourcesBuildPhase; + buildActionMask = 2147483647; + files = ( + AA579DF2161C07E6005F809B /* IMG_bmp.c in Sources */, + AA579DF4161C07E7005F809B /* IMG_gif.c in Sources */, + AA579DF6161C07E7005F809B /* IMG_ImageIO.m in Sources */, + AA579DF8161C07E7005F809B /* IMG_jpg.c in Sources */, + AA579DFA161C07E7005F809B /* IMG_lbm.c in Sources */, + AA579DFC161C07E7005F809B /* IMG_pcx.c in Sources */, + AA579DFE161C07E7005F809B /* IMG_png.c in Sources */, + AA579E00161C07E7005F809B /* IMG_pnm.c in Sources */, + AA579E02161C07E7005F809B /* IMG_tga.c in Sources */, + AA579E04161C07E7005F809B /* IMG_tif.c in Sources */, + AA579E06161C07E7005F809B /* IMG_webp.c in Sources */, + AA579E08161C07E7005F809B /* IMG_xcf.c in Sources */, + AA579E0A161C07E7005F809B /* IMG_xpm.c in Sources */, + AA579E0C161C07E7005F809B /* IMG_xv.c in Sources */, + AA579E0E161C07E7005F809B /* IMG_xxx.c in Sources */, + AA579E10161C07E7005F809B /* IMG.c in Sources */, + ); + runOnlyForDeploymentPostprocessing = 0; + }; + BE1FA73107AF4C45004B6283 /* Sources */ = { + isa = PBXSourcesBuildPhase; + buildActionMask = 2147483647; + files = ( + AA579DF3161C07E7005F809B /* IMG_bmp.c in Sources */, + AA579DF5161C07E7005F809B /* IMG_gif.c in Sources */, + AA579DF7161C07E7005F809B /* IMG_ImageIO.m in Sources */, + AA579DF9161C07E7005F809B /* IMG_jpg.c in Sources */, + AA579DFB161C07E7005F809B /* IMG_lbm.c in Sources */, + AA579DFD161C07E7005F809B /* IMG_pcx.c in Sources */, + AA579DFF161C07E7005F809B /* IMG_png.c in Sources */, + AA579E01161C07E7005F809B /* IMG_pnm.c in Sources */, + AA579E03161C07E7005F809B /* IMG_tga.c in Sources */, + AA579E05161C07E7005F809B /* IMG_tif.c in Sources */, + AA579E07161C07E7005F809B /* IMG_webp.c in Sources */, + AA579E09161C07E7005F809B /* IMG_xcf.c in Sources */, + AA579E0B161C07E7005F809B /* IMG_xpm.c in Sources */, + AA579E0D161C07E7005F809B /* IMG_xv.c in Sources */, + AA579E0F161C07E7005F809B /* IMG_xxx.c in Sources */, + AA579E11161C07E7005F809B /* IMG.c in Sources */, + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXSourcesBuildPhase section */ + +/* Begin PBXTargetDependency section */ + BE1FA74D07AF4C45004B6283 /* PBXTargetDependency */ = { + isa = PBXTargetDependency; + target = BE1FA71807AF4C44004B6283 /* Framework */; + targetProxy = BE1FA74C07AF4C45004B6283 /* PBXContainerItemProxy */; + }; +/* End PBXTargetDependency section */ + +/* Begin XCBuildConfiguration section */ + 007288110F0DA5BA00C302A9 /* Debug */ = { + isa = XCBuildConfiguration; + buildSettings = { + ARCHS = "$(ARCHS_STANDARD_32_64_BIT)"; + FRAMEWORK_SEARCH_PATHS = ( + "$(FRAMEWORK_SEARCH_PATHS_QUOTED)", + "$(HOME)/Library/Frameworks", + /Library/Frameworks, + ); + FRAMEWORK_SEARCH_PATHS_QUOTED = "\"$(SRCROOT)/Frameworks\""; + GCC_OPTIMIZATION_LEVEL = 0; + GCC_PREPROCESSOR_DEFINITIONS = ( + LOAD_BMP, + LOAD_GIF, + LOAD_JPG, + LOAD_LBM, + LOAD_PCX, + LOAD_PNG, + LOAD_PNM, + LOAD_TGA, + LOAD_TIF, + LOAD_WEBP, + LOAD_XPM, + LOAD_XV, + ); + GCC_SYMBOLS_PRIVATE_EXTERN = YES; + HEADER_SEARCH_PATHS = ( + "$(HEADER_SEARCH_PATHS_QUOTED)", + "$(HOME)/Library/Frameworks/SDL.framework/Headers", + /Library/Frameworks/SDL.framework/Headers, + ); + HEADER_SEARCH_PATHS_QUOTED = "\"$(SRCROOT)/Frameworks/webp.framework/Headers\""; + MACOSX_DEPLOYMENT_TARGET = 10.5; + PRODUCT_NAME = SDL2_image; + SDKROOT = macosx; + USER_HEADER_SEARCH_PATHS = "$(HEADER_SEARCH_PATHS_QUOTED) $(HOME)/Library/Frameworks/SDL2.framework/Headers /Library/Frameworks/SDL2.framework/Headers"; + }; + name = Debug; + }; + 007288120F0DA5BA00C302A9 /* Debug */ = { + isa = XCBuildConfiguration; + buildSettings = { + DYLIB_COMPATIBILITY_VERSION = 1; + DYLIB_CURRENT_VERSION = 1; + FRAMEWORK_SEARCH_PATHS = ( + "$(inherited)", + "\"$(SRCROOT)/Frameworks\"", + ); + FRAMEWORK_VERSION = A; + INFOPLIST_FILE = "Info-Framework.plist"; + INSTALL_PATH = "@rpath"; + LD_RUNPATH_SEARCH_PATHS = "@loader_path/Frameworks"; + OTHER_LDFLAGS = ( + "-weak_framework", + webp, + ); + WRAPPER_EXTENSION = framework; + }; + name = Debug; + }; + 007288130F0DA5BA00C302A9 /* Debug */ = { + isa = XCBuildConfiguration; + buildSettings = { + DYLIB_COMPATIBILITY_VERSION = 1; + DYLIB_CURRENT_VERSION = 1; + FRAMEWORK_SEARCH_PATHS = ""; + GCC_DYNAMIC_NO_PIC = NO; + GCC_GENERATE_DEBUGGING_SYMBOLS = YES; + GCC_OPTIMIZATION_LEVEL = 0; + GCC_PREPROCESSOR_DEFINITIONS = ( + LOAD_BMP, + LOAD_GIF, + LOAD_JPG, + LOAD_LBM, + LOAD_PCX, + LOAD_PNG, + LOAD_PNM, + LOAD_TGA, + LOAD_TIF, + LOAD_WEBP, + LOAD_XPM, + LOAD_XV, + ); + HEADER_SEARCH_PATHS = ( + /Library/Frameworks/SDL.framework/Headers, + "~/Library/Frameworks/SDL.framework/Headers", + ); + LIBRARY_STYLE = STATIC; + OTHER_CFLAGS = ""; + OTHER_LIBTOOL_FLAGS = ""; + OTHER_REZFLAGS = ""; + REZ_EXECUTABLE = YES; + SECTORDER_FLAGS = ""; + SKIP_INSTALL = YES; + }; + name = Debug; + }; + 007288140F0DA5BA00C302A9 /* Debug */ = { + isa = XCBuildConfiguration; + buildSettings = { + GCC_DYNAMIC_NO_PIC = NO; + GCC_GENERATE_DEBUGGING_SYMBOLS = YES; + GCC_OPTIMIZATION_LEVEL = 0; + OTHER_CFLAGS = ""; + OTHER_LDFLAGS = ""; + OTHER_REZFLAGS = ""; + PRODUCT_NAME = "Create DMG"; + REZ_EXECUTABLE = YES; + SECTORDER_FLAGS = ""; + WARNING_CFLAGS = ( + "-Wmost", + "-Wno-four-char-constants", + "-Wno-unknown-pragmas", + ); + ZERO_LINK = YES; + }; + name = Debug; + }; + 007288150F0DA5C400C302A9 /* Release */ = { + isa = XCBuildConfiguration; + buildSettings = { + ARCHS = "$(ARCHS_STANDARD_32_64_BIT)"; + DEPLOYMENT_POSTPROCESSING = YES; + FRAMEWORK_SEARCH_PATHS = ( + "$(FRAMEWORK_SEARCH_PATHS_QUOTED)", + "$(HOME)/Library/Frameworks", + /Library/Frameworks, + ); + FRAMEWORK_SEARCH_PATHS_QUOTED = "\"$(SRCROOT)/Frameworks\""; + GCC_GENERATE_DEBUGGING_SYMBOLS = NO; + GCC_PREPROCESSOR_DEFINITIONS = ( + LOAD_BMP, + LOAD_GIF, + LOAD_JPG, + LOAD_LBM, + LOAD_PCX, + LOAD_PNG, + LOAD_PNM, + LOAD_TGA, + LOAD_TIF, + LOAD_WEBP, + LOAD_XPM, + LOAD_XV, + ); + GCC_SYMBOLS_PRIVATE_EXTERN = YES; + HEADER_SEARCH_PATHS = ( + "$(HEADER_SEARCH_PATHS_QUOTED)", + "$(HOME)/Library/Frameworks/SDL.framework/Headers", + /Library/Frameworks/SDL.framework/Headers, + ); + HEADER_SEARCH_PATHS_QUOTED = "\"$(SRCROOT)/Frameworks/webp.framework/Headers\""; + MACOSX_DEPLOYMENT_TARGET = 10.5; + PRODUCT_NAME = SDL2_image; + SDKROOT = macosx; + SEPARATE_STRIP = YES; + STRIP_STYLE = "non-global"; + USER_HEADER_SEARCH_PATHS = "$(HEADER_SEARCH_PATHS_QUOTED) $(HOME)/Library/Frameworks/SDL2.framework/Headers /Library/Frameworks/SDL2.framework/Headers"; + }; + name = Release; + }; + 007288160F0DA5C400C302A9 /* Release */ = { + isa = XCBuildConfiguration; + buildSettings = { + DYLIB_COMPATIBILITY_VERSION = 1; + DYLIB_CURRENT_VERSION = 1; + FRAMEWORK_SEARCH_PATHS = ( + "$(inherited)", + "\"$(SRCROOT)/Frameworks\"", + ); + FRAMEWORK_VERSION = A; + INFOPLIST_FILE = "Info-Framework.plist"; + INSTALL_PATH = "@rpath"; + LD_RUNPATH_SEARCH_PATHS = "@loader_path/Frameworks"; + OTHER_LDFLAGS = ( + "-weak_framework", + webp, + ); + WRAPPER_EXTENSION = framework; + }; + name = Release; + }; + 007288170F0DA5C400C302A9 /* Release */ = { + isa = XCBuildConfiguration; + buildSettings = { + DYLIB_COMPATIBILITY_VERSION = 1; + DYLIB_CURRENT_VERSION = 1; + FRAMEWORK_SEARCH_PATHS = ""; + GCC_GENERATE_DEBUGGING_SYMBOLS = NO; + GCC_PREPROCESSOR_DEFINITIONS = ( + LOAD_BMP, + LOAD_GIF, + LOAD_JPG, + LOAD_LBM, + LOAD_PCX, + LOAD_PNG, + LOAD_PNM, + LOAD_TGA, + LOAD_TIF, + LOAD_WEBP, + LOAD_XPM, + LOAD_XV, + ); + HEADER_SEARCH_PATHS = ( + /Library/Frameworks/SDL.framework/Headers, + "~/Library/Frameworks/SDL.framework/Headers", + ); + LIBRARY_STYLE = STATIC; + OTHER_CFLAGS = ""; + OTHER_LIBTOOL_FLAGS = ""; + OTHER_REZFLAGS = ""; + REZ_EXECUTABLE = YES; + SECTORDER_FLAGS = ""; + SKIP_INSTALL = YES; + }; + name = Release; + }; + 007288180F0DA5C400C302A9 /* Release */ = { + isa = XCBuildConfiguration; + buildSettings = { + OTHER_CFLAGS = ""; + OTHER_LDFLAGS = ""; + OTHER_REZFLAGS = ""; + PRODUCT_NAME = "Create DMG"; + REZ_EXECUTABLE = YES; + SECTORDER_FLAGS = ""; + WARNING_CFLAGS = ( + "-Wmost", + "-Wno-four-char-constants", + "-Wno-unknown-pragmas", + ); + ZERO_LINK = NO; + }; + name = Release; + }; +/* End XCBuildConfiguration section */ + +/* Begin XCConfigurationList section */ + 00B7E3AA097EB73D00826121 /* Build configuration list for PBXNativeTarget "Framework" */ = { + isa = XCConfigurationList; + buildConfigurations = ( + 007288160F0DA5C400C302A9 /* Release */, + 007288120F0DA5BA00C302A9 /* Debug */, + ); + defaultConfigurationIsVisible = 0; + defaultConfigurationName = Release; + }; + 00B7E3AE097EB73D00826121 /* Build configuration list for PBXNativeTarget "Static Library" */ = { + isa = XCConfigurationList; + buildConfigurations = ( + 007288170F0DA5C400C302A9 /* Release */, + 007288130F0DA5BA00C302A9 /* Debug */, + ); + defaultConfigurationIsVisible = 0; + defaultConfigurationName = Release; + }; + 00B7E3B2097EB73D00826121 /* Build configuration list for PBXNativeTarget "Create DMG" */ = { + isa = XCConfigurationList; + buildConfigurations = ( + 007288180F0DA5C400C302A9 /* Release */, + 007288140F0DA5BA00C302A9 /* Debug */, + ); + defaultConfigurationIsVisible = 0; + defaultConfigurationName = Release; + }; + 00B7E3B6097EB73D00826121 /* Build configuration list for PBXProject "SDL_image" */ = { + isa = XCConfigurationList; + buildConfigurations = ( + 007288150F0DA5C400C302A9 /* Release */, + 007288110F0DA5BA00C302A9 /* Debug */, + ); + defaultConfigurationIsVisible = 0; + defaultConfigurationName = Release; + }; +/* End XCConfigurationList section */ + }; + rootObject = 0867D690FE84028FC02AAC07 /* Project object */; +} diff --git a/src/SDL2/Xcode/package b/src/SDL2/Xcode/package new file mode 100755 index 000000000..6e6b5707c --- /dev/null +++ b/src/SDL2/Xcode/package @@ -0,0 +1,272 @@ +#! /bin/csh -ef + +set prog = `/usr/bin/basename $0` +set usage = "Usage: $prog [-f] root-dir info-file [tiff-file] [-d dest-dir] [-r resource-dir] [-traditional | -gnutar]" +set noglob + +if (-x /usr/bin/mkbom) then + set mkbom=/usr/bin/mkbom + set lsbom=/usr/bin/lsbom +else + set mkbom=/usr/etc/mkbom + set lsbom=/usr/etc/lsbom +endif + +if (-x /usr/bin/awk) then + set awk=/usr/bin/awk +else + set awk=/bin/awk +endif + +set gnutar=/usr/bin/gnutar +set tar=/usr/bin/tar +set pax=/bin/pax + +# gather parameters +if ($#argv == 0) then + echo $usage + exit(1) +endif + +while ( $#argv > 0 ) + switch ( $argv[1] ) + case -d: + if ( $?destDir ) then + echo ${prog}: dest-dir parameter already set to ${destDir}. + echo $usage + exit(1) + else if ( $#argv < 2 ) then + echo ${prog}: -d option requires destination directory. + echo $usage + exit(1) + else + set destDir = $argv[2] + shift; shift + breaksw + endif + case -f: + if ( $?rootDir ) then + echo ${prog}: root-dir parameter already set to ${rootDir}. + echo $usage + exit(1) + else if ( $#argv < 2 ) then + echo ${prog}: -f option requires package root directory. + echo $usage + exit(1) + else + set rootDir = $argv[2] + set fflag + shift; shift + breaksw + endif + case -r: + if ( $?resDir ) then + echo ${prog}: resource-dir parameter already set to ${resDir}. + echo $usage + exit(1) + else if ( $#argv < 2 ) then + echo ${prog}: -r option requires package resource directory. + echo $usage + exit(1) + else + set resDir = $argv[2] + shift; shift + breaksw + endif + case -traditional: + set usetar + unset usegnutar + unset usepax + breaksw + case -gnutar: + set usegnutar + unset usepax + unset usetar + case -B: + # We got long file names, better use bigtar instead + #set archiver = /NextAdmin/Installer.app/Resources/installer_bigtar + echo 2>&1 ${prog}: -B flag is no longer relevant. + shift + breaksw + case -*: + echo ${prog}: Unknown option: $argv[1] + echo $usage + exit(1) + case *.info: + if ( $?info ) then + echo ${prog}: info-file parameter already set to ${info}. + echo $usage + exit(1) + else + set info = "$argv[1]" + shift + breaksw + endif + case *.tiff: + if ( $?tiff ) then + echo ${prog}: tiff-file parameter already set to ${tiff}. + echo $usage + exit(1) + else + set tiff = "$argv[1]" + shift + breaksw + endif + default: + if ( $?rootDir ) then + echo ${prog}: unrecognized parameter: $argv[1] + echo $usage + exit(1) + else + set rootDir = "$argv[1]" + shift + breaksw + endif + endsw +end + +# check for mandatory parameters +if ( ! $?rootDir ) then + echo ${prog}: missing root-dir parameter. + echo $usage + exit(1) +else if ( ! $?info) then + echo ${prog}: missing info-file parameter. + echo $usage + exit(1) +endif + +# destDir gets default value if unset on command line +if ( $?destDir ) then + /bin/mkdir -p $destDir +else + set destDir = . +endif + +# derive the root name for the package from the root name of the info file +set root = `/usr/bin/basename $info .info` + +# create package directory +set pkg = ${destDir}/${root}.pkg +echo Generating Installer package $pkg ... +if ( -e $pkg ) /bin/rm -rf $pkg +/bin/mkdir -p -m 755 $pkg + +# (gnu)tar/pax and compress root directory to package archive +echo -n " creating package archive ... " +if ( $?fflag ) then + set pkgTop = ${rootDir:t} + set parent = ${rootDir:h} + if ( "$parent" == "$pkgTop" ) set parent = "." +else + set parent = $rootDir + set pkgTop = . +endif +if ( $?usetar ) then + set pkgArchive = $pkg/$root.tar.Z + (cd $parent; $tar -w $pkgTop) | /usr/bin/compress -f -c > $pkgArchive +else if ( $?usegnutar ) then + set pkgArchive = $pkg/$root.tar.gz + (cd $parent; $gnutar zcf $pkgArchive $pkgTop) +else + set pkgArchive = $pkg/$root.pax.gz + (cd $parent; $pax -w -z -x cpio $pkgTop) > $pkgArchive +endif +/bin/chmod 444 $pkgArchive +echo done. + +# copy info file to package +set pkgInfo = $pkg/$root.info +echo -n " copying ${info:t} ... " +/bin/cp $info $pkgInfo +/bin/chmod 444 $pkgInfo +echo done. + +# copy tiff file to package +if ( $?tiff ) then + set pkgTiff = $pkg/$root.tiff + echo -n " copying ${tiff:t} ... " + /bin/cp $tiff $pkgTiff + /bin/chmod 444 $pkgTiff + echo done. +endif + +# copy resources to package +if ( $?resDir ) then + echo -n " copying ${resDir:t} ... " + + # don't want to see push/pop output + pushd $resDir > /dev/null + # get lists of resources. We'll want to change + # permissions on just these things later. + set directoriesInResDir = `find . -type d` + set filesInResDir = `find . -type f` + popd > /dev/null + + # copy the resource directory contents into the package directory + foreach resFile (`ls $resDir`) + cp -r $resDir/$resFile $pkg + end + + pushd $pkg > /dev/null + # Change all directories to +r+x, except the package + # directory itself + foreach resFileItem ($directoriesInResDir) + if ( $resFileItem != "." ) then + chmod 555 $resFileItem + endif + end + # change all flat files to read only + foreach resFileItem ($filesInResDir) + chmod 444 $resFileItem + end + popd > /dev/null + + echo done. +endif + +# generate bom file +set pkgBom = $pkg/$root.bom +echo -n " generating bom file ... " +/bin/rm -f $pkgBom +if ( $?fflag ) then + $mkbom $parent $pkgBom >& /dev/null +else + $mkbom $rootDir $pkgBom >& /dev/null +endif +/bin/chmod 444 $pkgArchive +echo done. + +# generate sizes file +set pkgSizes = $pkg/$root.sizes +echo -n " generating sizes file ... " + +# compute number of files in package +set numFiles = `$lsbom -s $pkgBom | /usr/bin/wc -l` + +# compute package size when compressed +@ compressedSize = `/usr/bin/du -k -s $pkg | $awk '{print $1}'` +@ compressedSize += 3 # add 1KB each for sizes, location, status files + +@ infoSize = `/bin/ls -s $pkgInfo | $awk '{print $1}'` +@ bomSize = `/bin/ls -s $pkgBom | $awk '{print $1}'` +if ( $?tiff ) then + @ tiffSize = `/bin/ls -s $pkgTiff | $awk '{print $1}'` +else + @ tiffSize = 0 +endif + +@ installedSize = `/usr/bin/du -k -s $rootDir | $awk '{print $1}'` +@ installedSize += $infoSize + $bomSize + $tiffSize + 3 + +# echo size parameters to sizes file +echo NumFiles $numFiles > $pkgSizes +echo InstalledSize $installedSize >> $pkgSizes +echo CompressedSize $compressedSize >> $pkgSizes +echo done. +echo " ... finished generating $pkg." + +exit(0) + +# end package + diff --git a/src/SDL2/Xcode/pkg-support/SDL_image.info b/src/SDL2/Xcode/pkg-support/SDL_image.info new file mode 100644 index 000000000..fa02a8f64 --- /dev/null +++ b/src/SDL2/Xcode/pkg-support/SDL_image.info @@ -0,0 +1,15 @@ +Title SDL_image 1.2.4 +Version 1 +Description SDL_image Library for Mac OS X (http://www.libsdl.org/projects/SDL_image) +DefaultLocation /Library/Frameworks +Diskname (null) +DeleteWarning +NeedsAuthorization NO +DisableStop NO +UseUserMask NO +Application NO +Relocatable YES +Required NO +InstallOnly NO +RequiresReboot NO +InstallFat NO diff --git a/src/SDL2/Xcode/pkg-support/codesign-frameworks.sh b/src/SDL2/Xcode/pkg-support/codesign-frameworks.sh new file mode 100755 index 000000000..16dea2519 --- /dev/null +++ b/src/SDL2/Xcode/pkg-support/codesign-frameworks.sh @@ -0,0 +1,43 @@ +#!/bin/sh + +# WARNING: You may have to run Clean in Xcode after changing CODE_SIGN_IDENTITY! + +# Verify that $CODE_SIGN_IDENTITY is set +if [ -z "$CODE_SIGN_IDENTITY" ] ; then + echo "CODE_SIGN_IDENTITY needs to be non-empty for codesigning frameworks!" + + if [ "$CONFIGURATION" = "Release" ] ; then + exit 1 + else + # Codesigning is optional for non-release builds. + exit 0 + fi +fi + +SAVEIFS=$IFS +IFS=$(echo -en "\n\b") + +FRAMEWORK_DIR="${TARGET_BUILD_DIR}" + +# Loop through all frameworks +FRAMEWORKS=`find "${FRAMEWORK_DIR}" -type d -name "*.framework" | sed -e "s/\(.*\)/\1\/Versions\/A\//"` +RESULT=$? +if [[ $RESULT != 0 ]] ; then + exit 1 +fi + +echo "Found:" +echo "${FRAMEWORKS}" + +for FRAMEWORK in $FRAMEWORKS; +do + echo "Signing '${FRAMEWORK}'" + `codesign -f -v -s "${CODE_SIGN_IDENTITY}" "${FRAMEWORK}"` + RESULT=$? + if [[ $RESULT != 0 ]] ; then + exit 1 + fi +done + +# restore $IFS +IFS=$SAVEIFS diff --git a/src/SDL2/Xcode/pkg-support/mkpackage.sh b/src/SDL2/Xcode/pkg-support/mkpackage.sh new file mode 100755 index 000000000..8bd9e3179 --- /dev/null +++ b/src/SDL2/Xcode/pkg-support/mkpackage.sh @@ -0,0 +1,27 @@ +#!/bin/sh + +# Generic script to create a package with Project Builder in mind +# There should only be one version of this script for all projects! + +FRAMEWORK="$1" +VARIANT="$2" + +PACKAGE="$FRAMEWORK" +PACKAGE_RESOURCES="pkg-support/resources" + +echo "Building package for $FRAMEWORK.framework" +echo "Will fetch resources from $PACKAGE_RESOURCES" +echo "Will create the package $PACKAGE.pkg" + +# create a copy of the framework +mkdir -p build/pkg-tmp +/Developer/Tools/CpMac -r "build/$FRAMEWORK.framework" build/pkg-tmp/ + +./package build/pkg-tmp "pkg-support/$PACKAGE.info" -d build -r "$PACKAGE_RESOURCES" + +# remove temporary files +rm -rf build/pkg-tmp + +# compress +(cd build; tar -zcvf "$PACKAGE.pkg.tar.gz" "$PACKAGE.pkg") + diff --git a/src/SDL2/Xcode/pkg-support/resources/ReadMe.txt b/src/SDL2/Xcode/pkg-support/resources/ReadMe.txt new file mode 100644 index 000000000..73686f785 --- /dev/null +++ b/src/SDL2/Xcode/pkg-support/resources/ReadMe.txt @@ -0,0 +1,26 @@ +SDL_image is an example portable image loading library for use with SDL. + +The source code is available from: http://www.libsdl.org/projects/SDL_image + +This library is distributed under the terms of the zlib license: http://www.zlib.net/zlib_license.html + +This packages contains the SDL2_image.framework for OS X. Conforming with Apple guidelines, this framework contains both the SDL runtime component and development header files. + +Requirements: +You must have the SDL2.framework installed. + +To Install: +Copy the SDL2_image.framework to /Library/Frameworks + +You may alternatively install it in /Library/Frameworks if your access privileges are not high enough. (Be aware that the Xcode templates we provide in the SDL Developer Extras package may require some adjustment for your system if you do this.) + + + + +(Partial) History of PB/Xcode projects: +2009-09-21 - Updated for 64-bit (Snow Leopard) Universal Binaries. + Switched to 10.4 minimum requirement. + Switched to ImageIO backend for distribution. + Static libraries of libpng and libjpeg are no longer maintained and may eventually be removed. + +2006-01-31 - First entry in history. Updated for Universal Binaries. Static libraries of libpng and libjpeg have been brought up-to-date and built as Universal. diff --git a/src/SDL2/Xcode/pkg-support/resources/Welcome.txt b/src/SDL2/Xcode/pkg-support/resources/Welcome.txt new file mode 100644 index 000000000..8993c91fd --- /dev/null +++ b/src/SDL2/Xcode/pkg-support/resources/Welcome.txt @@ -0,0 +1,3 @@ +This package installs the SDL_image library into /Library/Frameworks. You can also install it in +/Library/Frameworks if your access privileges are not high enough. + diff --git a/src/SDL2/Xcode/showimage/English.lproj/InfoPlist.strings b/src/SDL2/Xcode/showimage/English.lproj/InfoPlist.strings new file mode 100644 index 0000000000000000000000000000000000000000..1a9590d86d74085eebd038fe84c0e03852722da6 GIT binary patch literal 532 zcmbV|OAoJZ2|qqyv+^0;-`d_zvh6oGpbZ{-BuY2J|IGmEbJ!*y^gSBWMqt zF9-e|)u_o^l&cQ9MlEA@bq|LlME zGHz@fhh&lXTjD=Sr;d6Rb)ylR9y^~jVlqfFjdi9=X4cD}!=_JmJLZALDca*aOOwn} LcxIZl`BD1;kMmi6 literal 0 HcmV?d00001 diff --git a/src/SDL2/Xcode/showimage/Info-showimage__Upgraded_.plist b/src/SDL2/Xcode/showimage/Info-showimage__Upgraded_.plist new file mode 100644 index 000000000..c98d6e2ec --- /dev/null +++ b/src/SDL2/Xcode/showimage/Info-showimage__Upgraded_.plist @@ -0,0 +1,24 @@ + + + + + CFBundleDevelopmentRegion + English + CFBundleExecutable + showimage + CFBundleIconFile + + CFBundleInfoDictionaryVersion + 6.0 + CFBundlePackageType + APPL + CFBundleSignature + ???? + CFBundleVersion + 0.1 + NSMainNibFile + MainMenu + NSPrincipalClass + NSApplication + + diff --git a/src/SDL2/Xcode/showimage/SDLMain.h b/src/SDL2/Xcode/showimage/SDLMain.h new file mode 100644 index 000000000..c56d90cbe --- /dev/null +++ b/src/SDL2/Xcode/showimage/SDLMain.h @@ -0,0 +1,16 @@ +/* SDLMain.m - main entry point for our Cocoa-ized SDL app + Initial Version: Darrell Walisser + Non-NIB-Code & other changes: Max Horn + + Feel free to customize this file to suit your needs +*/ + +#ifndef _SDLMain_h_ +#define _SDLMain_h_ + +#import + +@interface SDLMain : NSObject +@end + +#endif /* _SDLMain_h_ */ diff --git a/src/SDL2/Xcode/showimage/SDLMain.m b/src/SDL2/Xcode/showimage/SDLMain.m new file mode 100644 index 000000000..6a2247b15 --- /dev/null +++ b/src/SDL2/Xcode/showimage/SDLMain.m @@ -0,0 +1,383 @@ +/* SDLMain.m - main entry point for our Cocoa-ized SDL app + Initial Version: Darrell Walisser + Non-NIB-Code & other changes: Max Horn + + Feel free to customize this file to suit your needs +*/ + +#include +#include "SDLMain.h" +#include /* for MAXPATHLEN */ +#include + +/* For some reaon, Apple removed setAppleMenu from the headers in 10.4, + but the method still is there and works. To avoid warnings, we declare + it ourselves here. */ +@interface NSApplication(SDL_Missing_Methods) +- (void)setAppleMenu:(NSMenu *)menu; +@end + +/* Use this flag to determine whether we use SDLMain.nib or not */ +#define SDL_USE_NIB_FILE 0 + +/* Use this flag to determine whether we use CPS (docking) or not */ +#define SDL_USE_CPS 1 +#ifdef SDL_USE_CPS +/* Portions of CPS.h */ +typedef struct CPSProcessSerNum +{ + UInt32 lo; + UInt32 hi; +} CPSProcessSerNum; + +extern OSErr CPSGetCurrentProcess( CPSProcessSerNum *psn); +extern OSErr CPSEnableForegroundOperation( CPSProcessSerNum *psn, UInt32 _arg2, UInt32 _arg3, UInt32 _arg4, UInt32 _arg5); +extern OSErr CPSSetFrontProcess( CPSProcessSerNum *psn); + +#endif /* SDL_USE_CPS */ + +static int gArgc; +static char **gArgv; +static BOOL gFinderLaunch; +static BOOL gCalledAppMainline = FALSE; + +static NSString *getApplicationName(void) +{ + const NSDictionary *dict; + NSString *appName = 0; + + /* Determine the application name */ + dict = (const NSDictionary *)CFBundleGetInfoDictionary(CFBundleGetMainBundle()); + if (dict) + appName = [dict objectForKey: @"CFBundleName"]; + + if (![appName length]) + appName = [[NSProcessInfo processInfo] processName]; + + return appName; +} + +#if SDL_USE_NIB_FILE +/* A helper category for NSString */ +@interface NSString (ReplaceSubString) +- (NSString *)stringByReplacingRange:(NSRange)aRange with:(NSString *)aString; +@end +#endif + +@interface SDLApplication : NSApplication +@end + +@implementation SDLApplication +/* Invoked from the Quit menu item */ +- (void)terminate:(id)sender +{ + /* Post a SDL_QUIT event */ + SDL_Event event; + event.type = SDL_QUIT; + SDL_PushEvent(&event); +} +@end + +/* The main class of the application, the application's delegate */ +@implementation SDLMain + +/* Set the working directory to the .app's parent directory */ +- (void) setupWorkingDirectory:(BOOL)shouldChdir +{ + if (shouldChdir) + { + char parentdir[MAXPATHLEN]; + CFURLRef url = CFBundleCopyBundleURL(CFBundleGetMainBundle()); + CFURLRef url2 = CFURLCreateCopyDeletingLastPathComponent(0, url); + if (CFURLGetFileSystemRepresentation(url2, 1, (UInt8 *)parentdir, MAXPATHLEN)) { + chdir(parentdir); /* chdir to the binary app's parent */ + } + CFRelease(url); + CFRelease(url2); + } +} + +#if SDL_USE_NIB_FILE + +/* Fix menu to contain the real app name instead of "SDL App" */ +- (void)fixMenu:(NSMenu *)aMenu withAppName:(NSString *)appName +{ + NSRange aRange; + NSEnumerator *enumerator; + NSMenuItem *menuItem; + + aRange = [[aMenu title] rangeOfString:@"SDL App"]; + if (aRange.length != 0) + [aMenu setTitle: [[aMenu title] stringByReplacingRange:aRange with:appName]]; + + enumerator = [[aMenu itemArray] objectEnumerator]; + while ((menuItem = [enumerator nextObject])) + { + aRange = [[menuItem title] rangeOfString:@"SDL App"]; + if (aRange.length != 0) + [menuItem setTitle: [[menuItem title] stringByReplacingRange:aRange with:appName]]; + if ([menuItem hasSubmenu]) + [self fixMenu:[menuItem submenu] withAppName:appName]; + } + [ aMenu sizeToFit ]; +} + +#else + +static void setApplicationMenu(void) +{ + /* warning: this code is very odd */ + NSMenu *appleMenu; + NSMenuItem *menuItem; + NSString *title; + NSString *appName; + + appName = getApplicationName(); + appleMenu = [[NSMenu alloc] initWithTitle:@""]; + + /* Add menu items */ + title = [@"About " stringByAppendingString:appName]; + [appleMenu addItemWithTitle:title action:@selector(orderFrontStandardAboutPanel:) keyEquivalent:@""]; + + [appleMenu addItem:[NSMenuItem separatorItem]]; + + title = [@"Hide " stringByAppendingString:appName]; + [appleMenu addItemWithTitle:title action:@selector(hide:) keyEquivalent:@"h"]; + + menuItem = (NSMenuItem *)[appleMenu addItemWithTitle:@"Hide Others" action:@selector(hideOtherApplications:) keyEquivalent:@"h"]; + [menuItem setKeyEquivalentModifierMask:(NSAlternateKeyMask|NSCommandKeyMask)]; + + [appleMenu addItemWithTitle:@"Show All" action:@selector(unhideAllApplications:) keyEquivalent:@""]; + + [appleMenu addItem:[NSMenuItem separatorItem]]; + + title = [@"Quit " stringByAppendingString:appName]; + [appleMenu addItemWithTitle:title action:@selector(terminate:) keyEquivalent:@"q"]; + + + /* Put menu into the menubar */ + menuItem = [[NSMenuItem alloc] initWithTitle:@"" action:nil keyEquivalent:@""]; + [menuItem setSubmenu:appleMenu]; + [[NSApp mainMenu] addItem:menuItem]; + + /* Tell the application object that this is now the application menu */ + [NSApp setAppleMenu:appleMenu]; + + /* Finally give up our references to the objects */ + [appleMenu release]; + [menuItem release]; +} + +/* Create a window menu */ +static void setupWindowMenu(void) +{ + NSMenu *windowMenu; + NSMenuItem *windowMenuItem; + NSMenuItem *menuItem; + + windowMenu = [[NSMenu alloc] initWithTitle:@"Window"]; + + /* "Minimize" item */ + menuItem = [[NSMenuItem alloc] initWithTitle:@"Minimize" action:@selector(performMiniaturize:) keyEquivalent:@"m"]; + [windowMenu addItem:menuItem]; + [menuItem release]; + + /* Put menu into the menubar */ + windowMenuItem = [[NSMenuItem alloc] initWithTitle:@"Window" action:nil keyEquivalent:@""]; + [windowMenuItem setSubmenu:windowMenu]; + [[NSApp mainMenu] addItem:windowMenuItem]; + + /* Tell the application object that this is now the window menu */ + [NSApp setWindowsMenu:windowMenu]; + + /* Finally give up our references to the objects */ + [windowMenu release]; + [windowMenuItem release]; +} + +/* Replacement for NSApplicationMain */ +static void CustomApplicationMain (int argc, char **argv) +{ + NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; + SDLMain *sdlMain; + + /* Ensure the application object is initialised */ + [SDLApplication sharedApplication]; + +#ifdef SDL_USE_CPS + { + CPSProcessSerNum PSN; + /* Tell the dock about us */ + if (!CPSGetCurrentProcess(&PSN)) + if (!CPSEnableForegroundOperation(&PSN,0x03,0x3C,0x2C,0x1103)) + if (!CPSSetFrontProcess(&PSN)) + [SDLApplication sharedApplication]; + } +#endif /* SDL_USE_CPS */ + + /* Set up the menubar */ + [NSApp setMainMenu:[[NSMenu alloc] init]]; + setApplicationMenu(); + setupWindowMenu(); + + /* Create SDLMain and make it the app delegate */ + sdlMain = [[SDLMain alloc] init]; + [NSApp setDelegate:sdlMain]; + + /* Start the main event loop */ + [NSApp run]; + + [sdlMain release]; + [pool release]; +} + +#endif + + +/* + * Catch document open requests...this lets us notice files when the app + * was launched by double-clicking a document, or when a document was + * dragged/dropped on the app's icon. You need to have a + * CFBundleDocumentsType section in your Info.plist to get this message, + * apparently. + * + * Files are added to gArgv, so to the app, they'll look like command line + * arguments. Previously, apps launched from the finder had nothing but + * an argv[0]. + * + * This message may be received multiple times to open several docs on launch. + * + * This message is ignored once the app's mainline has been called. + */ +- (BOOL)application:(NSApplication *)theApplication openFile:(NSString *)filename +{ + const char *temparg; + size_t arglen; + char *arg; + char **newargv; + + if (!gFinderLaunch) /* MacOS is passing command line args. */ + return FALSE; + + if (gCalledAppMainline) /* app has started, ignore this document. */ + return FALSE; + + temparg = [filename UTF8String]; + arglen = SDL_strlen(temparg) + 1; + arg = (char *) SDL_malloc(arglen); + if (arg == NULL) + return FALSE; + + newargv = (char **) realloc(gArgv, sizeof (char *) * (gArgc + 2)); + if (newargv == NULL) + { + SDL_free(arg); + return FALSE; + } + gArgv = newargv; + + SDL_strlcpy(arg, temparg, arglen); + gArgv[gArgc++] = arg; + gArgv[gArgc] = NULL; + return TRUE; +} + + +/* Called when the internal event loop has just started running */ +- (void) applicationDidFinishLaunching: (NSNotification *) note +{ + int status; + + /* Set the working directory to the .app's parent directory */ + [self setupWorkingDirectory:gFinderLaunch]; + +#if SDL_USE_NIB_FILE + /* Set the main menu to contain the real app name instead of "SDL App" */ + [self fixMenu:[NSApp mainMenu] withAppName:getApplicationName()]; +#endif + + /* Hand off to main application code */ + gCalledAppMainline = TRUE; + status = SDL_main (gArgc, gArgv); + + /* We're done, thank you for playing */ + exit(status); +} +@end + + +@implementation NSString (ReplaceSubString) + +- (NSString *)stringByReplacingRange:(NSRange)aRange with:(NSString *)aString +{ + unsigned int bufferSize; + unsigned int selfLen = [self length]; + unsigned int aStringLen = [aString length]; + unichar *buffer; + NSRange localRange; + NSString *result; + + bufferSize = selfLen + aStringLen - aRange.length; + buffer = (unichar *)NSAllocateMemoryPages(bufferSize*sizeof(unichar)); + + /* Get first part into buffer */ + localRange.location = 0; + localRange.length = aRange.location; + [self getCharacters:buffer range:localRange]; + + /* Get middle part into buffer */ + localRange.location = 0; + localRange.length = aStringLen; + [aString getCharacters:(buffer+aRange.location) range:localRange]; + + /* Get last part into buffer */ + localRange.location = aRange.location + aRange.length; + localRange.length = selfLen - localRange.location; + [self getCharacters:(buffer+aRange.location+aStringLen) range:localRange]; + + /* Build output string */ + result = [NSString stringWithCharacters:buffer length:bufferSize]; + + NSDeallocateMemoryPages(buffer, bufferSize); + + return result; +} + +@end + + + +#ifdef main +# undef main +#endif + + +/* Main entry point to executable - should *not* be SDL_main! */ +int main (int argc, char **argv) +{ + /* Copy the arguments into a global variable */ + /* This is passed if we are launched by double-clicking */ + if ( argc >= 2 && strncmp (argv[1], "-psn", 4) == 0 ) { + gArgv = (char **) SDL_malloc(sizeof (char *) * 2); + gArgv[0] = argv[0]; + gArgv[1] = NULL; + gArgc = 1; + gFinderLaunch = YES; + } else { + int i; + gArgc = argc; + gArgv = (char **) SDL_malloc(sizeof (char *) * (argc+1)); + for (i = 0; i <= argc; i++) + gArgv[i] = argv[i]; + gFinderLaunch = NO; + } + +#if SDL_USE_NIB_FILE + [SDLApplication poseAsClass:[NSApplication class]]; + NSApplicationMain (argc, argv); +#else + CustomApplicationMain (argc, argv); +#endif + return 0; +} + diff --git a/src/SDL2/Xcode/showimage/showimage.xcodeproj/project.pbxproj b/src/SDL2/Xcode/showimage/showimage.xcodeproj/project.pbxproj new file mode 100644 index 000000000..88f79b004 --- /dev/null +++ b/src/SDL2/Xcode/showimage/showimage.xcodeproj/project.pbxproj @@ -0,0 +1,340 @@ +// !$*UTF8*$! +{ + archiveVersion = 1; + classes = { + }; + objectVersion = 46; + objects = { + +/* Begin PBXBuildFile section */ + BE1FA82C07AF9002004B6283 /* SDLMain.h in Headers */ = {isa = PBXBuildFile; fileRef = F5A47A9D01A0482F01D3D55B /* SDLMain.h */; }; + BE1FA82E07AF9002004B6283 /* InfoPlist.strings in Resources */ = {isa = PBXBuildFile; fileRef = 089C165CFE840E0CC02AAC07 /* InfoPlist.strings */; }; + BE1FA83007AF9002004B6283 /* SDLMain.m in Sources */ = {isa = PBXBuildFile; fileRef = F5A47A9E01A0483001D3D55B /* SDLMain.m */; }; + BE1FA83107AF9002004B6283 /* showimage.c in Sources */ = {isa = PBXBuildFile; fileRef = F5A068FF01CD8555012F876B /* showimage.c */; }; + BE1FA83307AF9002004B6283 /* Cocoa.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = 1058C7A1FEA54F0111CA2CBB /* Cocoa.framework */; }; + BE1FA83407AF9002004B6283 /* SDL.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = BE1FA82007AF8F33004B6283 /* SDL.framework */; }; + BE1FA83507AF9002004B6283 /* SDL_image.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = BE1FA82207AF8F44004B6283 /* SDL_image.framework */; }; +/* End PBXBuildFile section */ + +/* Begin PBXFileReference section */ + 089C165DFE840E0CC02AAC07 /* English */ = {isa = PBXFileReference; fileEncoding = 10; lastKnownFileType = text.plist.strings; name = English; path = English.lproj/InfoPlist.strings; sourceTree = ""; }; + 1058C7A1FEA54F0111CA2CBB /* Cocoa.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = Cocoa.framework; path = /System/Library/Frameworks/Cocoa.framework; sourceTree = ""; }; + 29B97324FDCFA39411CA2CEA /* AppKit.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = AppKit.framework; path = /System/Library/Frameworks/AppKit.framework; sourceTree = ""; }; + 29B97325FDCFA39411CA2CEA /* Foundation.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = Foundation.framework; path = /System/Library/Frameworks/Foundation.framework; sourceTree = ""; }; + BE1FA82007AF8F33004B6283 /* SDL.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = SDL.framework; path = /Library/Frameworks/SDL.framework; sourceTree = ""; }; + BE1FA82207AF8F44004B6283 /* SDL_image.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = SDL_image.framework; path = /Library/Frameworks/SDL_image.framework; sourceTree = ""; }; + BE1FA83607AF9002004B6283 /* Info-showimage__Upgraded_.plist */ = {isa = PBXFileReference; lastKnownFileType = text.plist.xml; path = "Info-showimage__Upgraded_.plist"; sourceTree = ""; }; + BE1FA83707AF9002004B6283 /* showimage.app */ = {isa = PBXFileReference; explicitFileType = wrapper.application; includeInIndex = 0; path = showimage.app; sourceTree = BUILT_PRODUCTS_DIR; }; + F5A068FF01CD8555012F876B /* showimage.c */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.c; name = showimage.c; path = ../../showimage.c; sourceTree = SOURCE_ROOT; }; + F5A47A9D01A0482F01D3D55B /* SDLMain.h */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.h; path = SDLMain.h; sourceTree = SOURCE_ROOT; }; + F5A47A9E01A0483001D3D55B /* SDLMain.m */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.objc; path = SDLMain.m; sourceTree = SOURCE_ROOT; }; +/* End PBXFileReference section */ + +/* Begin PBXFrameworksBuildPhase section */ + BE1FA83207AF9002004B6283 /* Frameworks */ = { + isa = PBXFrameworksBuildPhase; + buildActionMask = 2147483647; + files = ( + BE1FA83307AF9002004B6283 /* Cocoa.framework in Frameworks */, + BE1FA83407AF9002004B6283 /* SDL.framework in Frameworks */, + BE1FA83507AF9002004B6283 /* SDL_image.framework in Frameworks */, + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXFrameworksBuildPhase section */ + +/* Begin PBXGroup section */ + 080E96DDFE201D6D7F000001 /* Classes */ = { + isa = PBXGroup; + children = ( + F5A47A9D01A0482F01D3D55B /* SDLMain.h */, + F5A47A9E01A0483001D3D55B /* SDLMain.m */, + ); + name = Classes; + sourceTree = ""; + }; + 1058C7A0FEA54F0111CA2CBB /* Linked Frameworks */ = { + isa = PBXGroup; + children = ( + BE1FA82207AF8F44004B6283 /* SDL_image.framework */, + BE1FA82007AF8F33004B6283 /* SDL.framework */, + 1058C7A1FEA54F0111CA2CBB /* Cocoa.framework */, + ); + name = "Linked Frameworks"; + sourceTree = ""; + }; + 1058C7A2FEA54F0111CA2CBB /* Other Frameworks */ = { + isa = PBXGroup; + children = ( + 29B97325FDCFA39411CA2CEA /* Foundation.framework */, + 29B97324FDCFA39411CA2CEA /* AppKit.framework */, + ); + name = "Other Frameworks"; + sourceTree = ""; + }; + 19C28FACFE9D520D11CA2CBB /* Products */ = { + isa = PBXGroup; + children = ( + BE1FA83707AF9002004B6283 /* showimage.app */, + ); + name = Products; + sourceTree = ""; + }; + 29B97314FDCFA39411CA2CEA /* SDL App */ = { + isa = PBXGroup; + children = ( + 080E96DDFE201D6D7F000001 /* Classes */, + 29B97315FDCFA39411CA2CEA /* Other Sources */, + 29B97317FDCFA39411CA2CEA /* Resources */, + 29B97323FDCFA39411CA2CEA /* Frameworks */, + 19C28FACFE9D520D11CA2CBB /* Products */, + BE1FA83607AF9002004B6283 /* Info-showimage__Upgraded_.plist */, + ); + name = "SDL App"; + sourceTree = ""; + }; + 29B97315FDCFA39411CA2CEA /* Other Sources */ = { + isa = PBXGroup; + children = ( + F5A068FF01CD8555012F876B /* showimage.c */, + ); + name = "Other Sources"; + sourceTree = ""; + }; + 29B97317FDCFA39411CA2CEA /* Resources */ = { + isa = PBXGroup; + children = ( + 089C165CFE840E0CC02AAC07 /* InfoPlist.strings */, + ); + name = Resources; + sourceTree = ""; + }; + 29B97323FDCFA39411CA2CEA /* Frameworks */ = { + isa = PBXGroup; + children = ( + 1058C7A0FEA54F0111CA2CBB /* Linked Frameworks */, + 1058C7A2FEA54F0111CA2CBB /* Other Frameworks */, + ); + name = Frameworks; + sourceTree = ""; + }; +/* End PBXGroup section */ + +/* Begin PBXHeadersBuildPhase section */ + BE1FA82B07AF9002004B6283 /* Headers */ = { + isa = PBXHeadersBuildPhase; + buildActionMask = 2147483647; + files = ( + BE1FA82C07AF9002004B6283 /* SDLMain.h in Headers */, + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXHeadersBuildPhase section */ + +/* Begin PBXNativeTarget section */ + BE1FA82A07AF9002004B6283 /* showimage */ = { + isa = PBXNativeTarget; + buildConfigurationList = 00B7E55F097EF9A500826121 /* Build configuration list for PBXNativeTarget "showimage" */; + buildPhases = ( + BE1FA82B07AF9002004B6283 /* Headers */, + BE1FA82D07AF9002004B6283 /* Resources */, + BE1FA82F07AF9002004B6283 /* Sources */, + BE1FA83207AF9002004B6283 /* Frameworks */, + ); + buildRules = ( + ); + dependencies = ( + ); + name = showimage; + productInstallPath = "$(HOME)/Applications"; + productName = "SDL App"; + productReference = BE1FA83707AF9002004B6283 /* showimage.app */; + productType = "com.apple.product-type.application"; + }; +/* End PBXNativeTarget section */ + +/* Begin PBXProject section */ + 29B97313FDCFA39411CA2CEA /* Project object */ = { + isa = PBXProject; + attributes = { + LastUpgradeCheck = 0420; + }; + buildConfigurationList = 00B7E563097EF9A500826121 /* Build configuration list for PBXProject "showimage" */; + compatibilityVersion = "Xcode 3.2"; + developmentRegion = English; + hasScannedForEncodings = 0; + knownRegions = ( + English, + Japanese, + French, + German, + ); + mainGroup = 29B97314FDCFA39411CA2CEA /* SDL App */; + projectDirPath = ""; + projectRoot = ""; + targets = ( + BE1FA82A07AF9002004B6283 /* showimage */, + ); + }; +/* End PBXProject section */ + +/* Begin PBXResourcesBuildPhase section */ + BE1FA82D07AF9002004B6283 /* Resources */ = { + isa = PBXResourcesBuildPhase; + buildActionMask = 2147483647; + files = ( + BE1FA82E07AF9002004B6283 /* InfoPlist.strings in Resources */, + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXResourcesBuildPhase section */ + +/* Begin PBXSourcesBuildPhase section */ + BE1FA82F07AF9002004B6283 /* Sources */ = { + isa = PBXSourcesBuildPhase; + buildActionMask = 2147483647; + files = ( + BE1FA83007AF9002004B6283 /* SDLMain.m in Sources */, + BE1FA83107AF9002004B6283 /* showimage.c in Sources */, + ); + runOnlyForDeploymentPostprocessing = 0; + }; +/* End PBXSourcesBuildPhase section */ + +/* Begin PBXVariantGroup section */ + 089C165CFE840E0CC02AAC07 /* InfoPlist.strings */ = { + isa = PBXVariantGroup; + children = ( + 089C165DFE840E0CC02AAC07 /* English */, + ); + name = InfoPlist.strings; + sourceTree = ""; + }; +/* End PBXVariantGroup section */ + +/* Begin XCBuildConfiguration section */ + 00B7E560097EF9A500826121 /* Development */ = { + isa = XCBuildConfiguration; + buildSettings = { + COPY_PHASE_STRIP = NO; + FRAMEWORK_SEARCH_PATHS = ( + "$(HOME)/Library/Frameworks", + /Library/Frameworks, + ); + GCC_DYNAMIC_NO_PIC = NO; + GCC_GENERATE_DEBUGGING_SYMBOLS = YES; + GCC_OPTIMIZATION_LEVEL = 0; + HEADER_SEARCH_PATHS = ( + "$(HOME)/Library/Frameworks/SDL.framework/Headers", + /Library/Frameworks/SDL.framework/Headers, + ); + INFOPLIST_FILE = "Info-showimage__Upgraded_.plist"; + INSTALL_PATH = "$(HOME)/Applications"; + LIBRARY_SEARCH_PATHS = ""; + PRODUCT_NAME = showimage; + SECTORDER_FLAGS = ""; + WARNING_CFLAGS = ( + "-Wmost", + "-Wno-four-char-constants", + "-Wno-unknown-pragmas", + ); + WRAPPER_EXTENSION = app; + }; + name = Development; + }; + 00B7E561097EF9A500826121 /* Deployment */ = { + isa = XCBuildConfiguration; + buildSettings = { + COPY_PHASE_STRIP = YES; + FRAMEWORK_SEARCH_PATHS = ( + "$(HOME)/Library/Frameworks", + /Library/Frameworks, + ); + HEADER_SEARCH_PATHS = ( + "$(HOME)/Library/Frameworks/SDL.framework/Headers", + /Library/Frameworks/SDL.framework/Headers, + ); + INFOPLIST_FILE = "Info-showimage__Upgraded_.plist"; + INSTALL_PATH = "$(HOME)/Applications"; + LIBRARY_SEARCH_PATHS = ""; + PRODUCT_NAME = showimage; + SECTORDER_FLAGS = ""; + WARNING_CFLAGS = ( + "-Wmost", + "-Wno-four-char-constants", + "-Wno-unknown-pragmas", + ); + WRAPPER_EXTENSION = app; + }; + name = Deployment; + }; + 00B7E562097EF9A500826121 /* Default */ = { + isa = XCBuildConfiguration; + buildSettings = { + FRAMEWORK_SEARCH_PATHS = ( + "$(HOME)/Library/Frameworks", + /Library/Frameworks, + ); + HEADER_SEARCH_PATHS = ( + "$(HOME)/Library/Frameworks/SDL.framework/Headers", + /Library/Frameworks/SDL.framework/Headers, + ); + INFOPLIST_FILE = "Info-showimage__Upgraded_.plist"; + INSTALL_PATH = "$(HOME)/Applications"; + LIBRARY_SEARCH_PATHS = ""; + PRODUCT_NAME = showimage; + SECTORDER_FLAGS = ""; + WARNING_CFLAGS = ( + "-Wmost", + "-Wno-four-char-constants", + "-Wno-unknown-pragmas", + ); + WRAPPER_EXTENSION = app; + }; + name = Default; + }; + 00B7E564097EF9A500826121 /* Development */ = { + isa = XCBuildConfiguration; + buildSettings = { + }; + name = Development; + }; + 00B7E565097EF9A500826121 /* Deployment */ = { + isa = XCBuildConfiguration; + buildSettings = { + }; + name = Deployment; + }; + 00B7E566097EF9A500826121 /* Default */ = { + isa = XCBuildConfiguration; + buildSettings = { + }; + name = Default; + }; +/* End XCBuildConfiguration section */ + +/* Begin XCConfigurationList section */ + 00B7E55F097EF9A500826121 /* Build configuration list for PBXNativeTarget "showimage" */ = { + isa = XCConfigurationList; + buildConfigurations = ( + 00B7E560097EF9A500826121 /* Development */, + 00B7E561097EF9A500826121 /* Deployment */, + 00B7E562097EF9A500826121 /* Default */, + ); + defaultConfigurationIsVisible = 0; + defaultConfigurationName = Default; + }; + 00B7E563097EF9A500826121 /* Build configuration list for PBXProject "showimage" */ = { + isa = XCConfigurationList; + buildConfigurations = ( + 00B7E564097EF9A500826121 /* Development */, + 00B7E565097EF9A500826121 /* Deployment */, + 00B7E566097EF9A500826121 /* Default */, + ); + defaultConfigurationIsVisible = 0; + defaultConfigurationName = Default; + }; +/* End XCConfigurationList section */ + }; + rootObject = 29B97313FDCFA39411CA2CEA /* Project object */; +} diff --git a/src/SDL2/acinclude/libtool.m4 b/src/SDL2/acinclude/libtool.m4 new file mode 100644 index 000000000..b64223e2e --- /dev/null +++ b/src/SDL2/acinclude/libtool.m4 @@ -0,0 +1,7370 @@ +############################################################################## +# Based on libtool-2.2.6a +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +]) + +# serial 56 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +_LT_SETUP + +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +m4_defun([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR + +m4_require([_LT_TAG_COMPILER])dnl +_LT_PROG_ECHO_BACKSLASH + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + _LT_PATH_MAGIC + fi + ;; +esac + +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from `configure', and `config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# `config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain="$ac_aux_dir/ltmain.sh" +])# _LT_PROG_LTMAIN + + +## ------------------------------------- ## +## Accumulate code for creating libtool. ## +## ------------------------------------- ## + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the `libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + +## ------------------------ ## +## FIXME: Eliminate VARNAME ## +## ------------------------ ## + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to `config.status' so that its +# declaration there will have the same value as in `configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags="_LT_TAGS"dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Fix-up fallback echo if it was mangled by the above quoting rules. +case \$lt_ECHO in +*'\\\[$]0 --fallback-echo"')dnl " + lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` + ;; +esac + +_LT_OUTPUT_LIBTOOL_INIT +]) + + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +cat >"$CONFIG_LT" <<_LTEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate a libtool stub with the current configuration. + +lt_cl_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AS_SHELL_SANITIZE +_AS_PREPARE + +exec AS_MESSAGE_FD>&1 +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to ." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2008 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test $[#] != 0 +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try \`$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try \`$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +if test "$no_create" != yes; then + lt_cl_success=: + test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" + exec AS_MESSAGE_LOG_FD>/dev/null + $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false + exec AS_MESSAGE_LOG_FD>>config.log + $lt_cl_success || AS_EXIT(1) +fi +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +_LT_COPYING +_LT_LIBTOOL_TAGS + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + _LT_PROG_XSI_SHELLFNS + + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS="$save_LDFLAGS" + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[[012]]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES +# -------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=echo + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + m4_if([$1], [CXX], +[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX +# ----------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_SHELL_INIT + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[_LT_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$lt_ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +ECHO=${lt_ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<_LT_EOF +[$]* +_LT_EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +if test -z "$lt_ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if { echo_test_string=`eval $cmd`; } 2>/dev/null && + { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null + then + break + fi + done + fi + + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$ECHO" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + ECHO='print -r' + elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + ECHO='printf %s\n' + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + ECHO="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + ECHO=echo + fi + fi + fi + fi + fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +lt_ECHO=$ECHO +if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(lt_ECHO) +]) +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], + [An echo program that does not interpret backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" +])# _LT_ENABLE_LOCK + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[AC_CHECK_TOOL(AR, ar, false) +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1]) + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test x"[$]$2" = xyes; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + beos*) + # On BeOS, this test takes a really really long time. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ + = "XX$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line __oline__ "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links="nottested" +if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || + test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[[4-9]]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + #soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo ${libname} | sed -e 's/^lib//'`${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + #soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo ${libname} | $SED -e 's/^lib//'`${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[123]]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix[[3-9]]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # Some binutils ld are patched to set DT_RUNPATH + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], + [Run-time system search path for libraries]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program which can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program which can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + lt_cv_deplibs_check_method=pass_all + ;; + +cegcc) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method == "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi]) +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) + AC_SUBST([DUMPBIN]) + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +AC_MSG_CHECKING([for $compiler option to produce PIC]) +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC*) + # IBM XL 8.0 on PPC + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl*) + # IBM XL C 8.0/Fortran 10.1 on PPC + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac +AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag= + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE(int foo(void) {}, + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + ) + LDFLAGS="$save_LDFLAGS" + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], + [[If ld is used when linking, flag to hardcode $libdir into a binary + during linking. This must work even if $libdir does not exist]]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting ${shlibpath_var} if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [fix_srcfile_path], [1], + [Fix the shell variable $srcfile for the compiler]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC="$lt_save_CC" +])# _LT_LANG_C_CONFIG + + +# _LT_PROG_CXX +# ------------ +# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ +# compiler, we have our own version here. +m4_defun([_LT_PROG_CXX], +[ +pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) +AC_PROG_CXX +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi +popdef([AC_MSG_ERROR]) +])# _LT_PROG_CXX + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([_LT_PROG_CXX], []) + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[AC_REQUIRE([_LT_PROG_CXX])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd[[12]]*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + gnu*) + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' + ;; + *) + if test "$GXX" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 will use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' + ;; + xl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='echo' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=echo + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='echo' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + + _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +]) +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case $p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + else + prev= + fi + + if test "$pre_test_object_deps_done" = no; then + case $p in + -L* | -R*) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + ;; + + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)="$p" + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)="$p" + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_PROG_F77 +# ------------ +# Since AC_PROG_F77 is broken, in that it returns the empty string +# if there is no fortran compiler, we have our own version here. +m4_defun([_LT_PROG_F77], +[ +pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) +AC_PROG_F77 +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi +popdef([AC_MSG_ERROR]) +])# _LT_PROG_F77 + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([_LT_PROG_F77], []) + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_REQUIRE([_LT_PROG_F77])dnl +AC_LANG_PUSH(Fortran 77) + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_F77" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + CC=${F77-"f77"} + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$G77" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" +fi # test "$_lt_disable_F77" != yes + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_PROG_FC +# ----------- +# Since AC_PROG_FC is broken, in that it returns the empty string +# if there is no fortran compiler, we have our own version here. +m4_defun([_LT_PROG_FC], +[ +pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) +AC_PROG_FC +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi +popdef([AC_MSG_ERROR]) +])# _LT_PROG_FC + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([_LT_PROG_FC], []) + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_REQUIRE([_LT_PROG_FC])dnl +AC_LANG_PUSH(Fortran) + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + CC=${FC-"f95"} + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" +fi # test "$_lt_disable_FC" != yes + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC="$lt_save_CC" +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC="$lt_save_CC" +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +AC_MSG_RESULT([$xsi_shell]) +_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +AC_MSG_CHECKING([whether the shell understands "+="]) +lt_shell_append=no +( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +AC_MSG_RESULT([$lt_shell_append]) +_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_XSI_SHELLFNS +# --------------------- +# Bourne and XSI compatible variants of some useful shell functions. +m4_defun([_LT_PROG_XSI_SHELLFNS], +[case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $[*] )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} + +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + +dnl func_dirname_and_basename +dnl A portable version of this function is already defined in general.m4sh +dnl so there is no need for it here. + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; + esac +} + +# sed scripts: +my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[[^=]]*=//' + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$[@]"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF +esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$[1]+=\$[2]" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$[1]=\$$[1]\$[2]" +} + +_LT_EOF + ;; + esac +]) + diff --git a/src/SDL2/acinclude/ltoptions.m4 b/src/SDL2/acinclude/ltoptions.m4 new file mode 100644 index 000000000..d4df67919 --- /dev/null +++ b/src/SDL2/acinclude/ltoptions.m4 @@ -0,0 +1,370 @@ +############################################################################## +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option `$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + ]) +])# _LT_SET_OPTIONS + + +## --------------------------------- ## +## Macros to handle LT_INIT options. ## +## --------------------------------- ## + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [0], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) + +test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + +## ----------------- ## +## LTDL_INIT Options ## +## ----------------- ## + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) + diff --git a/src/SDL2/acinclude/ltsugar.m4 b/src/SDL2/acinclude/ltsugar.m4 new file mode 100644 index 000000000..02a939d81 --- /dev/null +++ b/src/SDL2/acinclude/ltsugar.m4 @@ -0,0 +1,125 @@ +############################################################################## +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) + diff --git a/src/SDL2/acinclude/ltversion.m4 b/src/SDL2/acinclude/ltversion.m4 new file mode 100644 index 000000000..83a83f20a --- /dev/null +++ b/src/SDL2/acinclude/ltversion.m4 @@ -0,0 +1,25 @@ +############################################################################## +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# Generated from ltversion.in. + +# serial 3012 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.2.6]) +m4_define([LT_PACKAGE_REVISION], [1.3012]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.2.6' +macro_revision='1.3012' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) + diff --git a/src/SDL2/acinclude/lt~obsolete.m4 b/src/SDL2/acinclude/lt~obsolete.m4 new file mode 100644 index 000000000..3b2acd4d0 --- /dev/null +++ b/src/SDL2/acinclude/lt~obsolete.m4 @@ -0,0 +1,93 @@ +############################################################################## +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 4 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) diff --git a/src/SDL2/acinclude/pkg.m4 b/src/SDL2/acinclude/pkg.m4 new file mode 100644 index 000000000..0048a3fa0 --- /dev/null +++ b/src/SDL2/acinclude/pkg.m4 @@ -0,0 +1,157 @@ +# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +# +# Copyright © 2004 Scott James Remnant . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# PKG_PROG_PKG_CONFIG([MIN-VERSION]) +# ---------------------------------- +AC_DEFUN([PKG_PROG_PKG_CONFIG], +[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) +AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=m4_default([$1], [0.9.0]) + AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + PKG_CONFIG="" + fi + +fi[]dnl +])# PKG_PROG_PKG_CONFIG + +# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +# +# Check to see whether a particular set of modules exists. Similar +# to PKG_CHECK_MODULES(), but does not set variables or print errors. +# +# +# Similar to PKG_CHECK_MODULES, make sure that the first instance of +# this or PKG_CHECK_MODULES is called, or make sure to call +# PKG_CHECK_EXISTS manually +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_EXISTS], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +if test -n "$PKG_CONFIG" && \ + AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then + m4_ifval([$2], [$2], [:]) +m4_ifvaln([$3], [else + $3])dnl +fi]) + + +# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +# --------------------------------------------- +m4_define([_PKG_CONFIG], +[if test -n "$PKG_CONFIG"; then + if test -n "$$1"; then + pkg_cv_[]$1="$$1" + else + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], + [pkg_failed=yes]) + fi +else + pkg_failed=untried +fi[]dnl +])# _PKG_CONFIG + +# _PKG_SHORT_ERRORS_SUPPORTED +# ----------------------------- +AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi[]dnl +])# _PKG_SHORT_ERRORS_SUPPORTED + + +# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +# [ACTION-IF-NOT-FOUND]) +# +# +# Note that if there is a possibility the first call to +# PKG_CHECK_MODULES might not happen, you should be sure to include an +# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac +# +# +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_MODULES], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +pkg_failed=no +AC_MSG_CHECKING([for $1]) + +_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +and $1[]_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details.]) + +if test $pkg_failed = yes; then + _PKG_SHORT_ERRORS_SUPPORTED + if test $_pkg_short_errors_supported = yes; then + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` + else + $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` + fi + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + + ifelse([$4], , [AC_MSG_ERROR(dnl +[Package requirements ($2) were not met: + +$$1_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +_PKG_TEXT +])], + [AC_MSG_RESULT([no]) + $4]) +elif test $pkg_failed = untried; then + ifelse([$4], , [AC_MSG_FAILURE(dnl +[The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +_PKG_TEXT + +To get pkg-config, see .])], + [$4]) +else + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + AC_MSG_RESULT([yes]) + ifelse([$3], , :, [$3]) +fi[]dnl +])# PKG_CHECK_MODULES diff --git a/src/SDL2/acinclude/sdl2.m4 b/src/SDL2/acinclude/sdl2.m4 new file mode 100644 index 000000000..a03b2d270 --- /dev/null +++ b/src/SDL2/acinclude/sdl2.m4 @@ -0,0 +1,202 @@ +# Configure paths for SDL +# Sam Lantinga 9/21/99 +# stolen from Manish Singh +# stolen back from Frank Belew +# stolen from Manish Singh +# Shamelessly stolen from Owen Taylor + +# serial 1 + +dnl AM_PATH_SDL2([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) +dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS +dnl +AC_DEFUN([AM_PATH_SDL2], +[dnl +dnl Get the cflags and libraries from the sdl2-config script +dnl +AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)], + sdl_prefix="$withval", sdl_prefix="") +AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)], + sdl_exec_prefix="$withval", sdl_exec_prefix="") +AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program], + , enable_sdltest=yes) + + min_sdl_version=ifelse([$1], ,2.0.0,$1) + + if test "x$sdl_prefix$sdl_exec_prefix" = x ; then + PKG_CHECK_MODULES([SDL], [sdl2 >= $min_sdl_version], + [sdl_pc=yes], + [sdl_pc=no]) + else + sdl_pc=no + if test x$sdl_exec_prefix != x ; then + sdl_config_args="$sdl_config_args --exec-prefix=$sdl_exec_prefix" + if test x${SDL2_CONFIG+set} != xset ; then + SDL2_CONFIG=$sdl_exec_prefix/bin/sdl2-config + fi + fi + if test x$sdl_prefix != x ; then + sdl_config_args="$sdl_config_args --prefix=$sdl_prefix" + if test x${SDL2_CONFIG+set} != xset ; then + SDL2_CONFIG=$sdl_prefix/bin/sdl2-config + fi + fi + fi + + if test "x$sdl_pc" = xyes ; then + no_sdl="" + SDL2_CONFIG="pkg-config sdl2" + else + as_save_PATH="$PATH" + if test "x$prefix" != xNONE && test "$cross_compiling" != yes; then + PATH="$prefix/bin:$prefix/usr/bin:$PATH" + fi + AC_PATH_PROG(SDL2_CONFIG, sdl2-config, no, [$PATH]) + PATH="$as_save_PATH" + AC_MSG_CHECKING(for SDL - version >= $min_sdl_version) + no_sdl="" + + if test "$SDL2_CONFIG" = "no" ; then + no_sdl=yes + else + SDL_CFLAGS=`$SDL2_CONFIG $sdl_config_args --cflags` + SDL_LIBS=`$SDL2_CONFIG $sdl_config_args --libs` + + sdl_major_version=`$SDL2_CONFIG $sdl_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + sdl_minor_version=`$SDL2_CONFIG $sdl_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + sdl_micro_version=`$SDL2_CONFIG $sdl_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test "x$enable_sdltest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_CXXFLAGS="$CXXFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $SDL_CFLAGS" + CXXFLAGS="$CXXFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SDL_LIBS" +dnl +dnl Now check if the installed SDL is sufficiently new. (Also sanity +dnl checks the results of sdl2-config to some extent +dnl + rm -f conf.sdltest + AC_TRY_RUN([ +#include +#include +#include +#include "SDL.h" + +char* +my_strdup (char *str) +{ + char *new_str; + + if (str) + { + new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char)); + strcpy (new_str, str); + } + else + new_str = NULL; + + return new_str; +} + +int main (int argc, char *argv[]) +{ + int major, minor, micro; + char *tmp_version; + + /* This hangs on some systems (?) + system ("touch conf.sdltest"); + */ + { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); } + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = my_strdup("$min_sdl_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_sdl_version"); + exit(1); + } + + if (($sdl_major_version > major) || + (($sdl_major_version == major) && ($sdl_minor_version > minor)) || + (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** 'sdl2-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version); + printf("*** of SDL required is %d.%d.%d. If sdl2-config is correct, then it is\n", major, minor, micro); + printf("*** best to upgrade to the required version.\n"); + printf("*** If sdl2-config was wrong, set the environment variable SDL2_CONFIG\n"); + printf("*** to point to the correct copy of sdl2-config, and remove the file\n"); + printf("*** config.cache before re-running configure\n"); + return 1; + } +} + +],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + CXXFLAGS="$ac_save_CXXFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_sdl" = x ; then + AC_MSG_RESULT(yes) + else + AC_MSG_RESULT(no) + fi + fi + if test "x$no_sdl" = x ; then + ifelse([$2], , :, [$2]) + else + if test "$SDL2_CONFIG" = "no" ; then + echo "*** The sdl2-config script installed by SDL could not be found" + echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in" + echo "*** your path, or set the SDL2_CONFIG environment variable to the" + echo "*** full path to sdl2-config." + else + if test -f conf.sdltest ; then + : + else + echo "*** Could not run SDL test program, checking why..." + CFLAGS="$CFLAGS $SDL_CFLAGS" + CXXFLAGS="$CXXFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SDL_LIBS" + AC_TRY_LINK([ +#include +#include "SDL.h" + +int main(int argc, char *argv[]) +{ return 0; } +#undef main +#define main K_and_R_C_main +], [ return 0; ], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding SDL or finding the wrong" + echo "*** version of SDL. If it is not finding SDL, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means SDL was incorrectly installed" + echo "*** or that you have moved SDL since it was installed. In the latter case, you" + echo "*** may want to edit the sdl2-config script: $SDL2_CONFIG" ]) + CFLAGS="$ac_save_CFLAGS" + CXXFLAGS="$ac_save_CXXFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + SDL_CFLAGS="" + SDL_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(SDL_CFLAGS) + AC_SUBST(SDL_LIBS) + rm -f conf.sdltest +]) diff --git a/src/SDL2/aclocal.m4 b/src/SDL2/aclocal.m4 new file mode 100644 index 000000000..1781e6df9 --- /dev/null +++ b/src/SDL2/aclocal.m4 @@ -0,0 +1,1107 @@ +# generated automatically by aclocal 1.13.1 -*- Autoconf -*- + +# Copyright (C) 1996-2012 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) + +# Copyright (C) 2002-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.13' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.13.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.13.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each '.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) + +# Copyright (C) 2003-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of '-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([acinclude/libtool.m4]) +m4_include([acinclude/ltoptions.m4]) +m4_include([acinclude/ltsugar.m4]) +m4_include([acinclude/ltversion.m4]) +m4_include([acinclude/lt~obsolete.m4]) +m4_include([acinclude/pkg.m4]) +m4_include([acinclude/sdl2.m4]) diff --git a/src/SDL2/autogen.sh b/src/SDL2/autogen.sh new file mode 100755 index 000000000..c4ec5b494 --- /dev/null +++ b/src/SDL2/autogen.sh @@ -0,0 +1,8 @@ +#!/bin/sh +# +aclocal -I acinclude +automake --foreign --include-deps --add-missing --copy +autoconf + +#./configure $* +echo "Now you are ready to run ./configure" diff --git a/src/SDL2/begin_code.h b/src/SDL2/begin_code.h new file mode 100644 index 000000000..dd1f0616d --- /dev/null +++ b/src/SDL2/begin_code.h @@ -0,0 +1,150 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file begin_code.h + * + * This file sets things up for C dynamic library function definitions, + * static inlined functions, and structures aligned at 4-byte alignment. + * If you don't like ugly C preprocessor code, don't look at this file. :) + */ + +/* This shouldn't be nested -- included it around code only. */ +#ifdef _begin_code_h +#error Nested inclusion of begin_code.h +#endif +#define _begin_code_h + +/* Some compilers use a special export keyword */ +#ifndef DECLSPEC +# if defined(__BEOS__) || defined(__HAIKU__) +# if defined(__GNUC__) +# define DECLSPEC __declspec(dllexport) +# else +# define DECLSPEC __declspec(export) +# endif +# elif defined(__WIN32__) +# ifdef __BORLANDC__ +# ifdef BUILD_SDL +# define DECLSPEC +# else +# define DECLSPEC __declspec(dllimport) +# endif +# else +# define DECLSPEC __declspec(dllexport) +# endif +# else +# if defined(__GNUC__) && __GNUC__ >= 4 +# define DECLSPEC __attribute__ ((visibility("default"))) +# else +# define DECLSPEC +# endif +# endif +#endif + +/* By default SDL uses the C calling convention */ +#ifndef SDLCALL +#if defined(__WIN32__) && !defined(__GNUC__) +#define SDLCALL __cdecl +#else +#define SDLCALL +#endif +#endif /* SDLCALL */ + +/* Removed DECLSPEC on Symbian OS because SDL cannot be a DLL in EPOC */ +#ifdef __SYMBIAN32__ +#undef DECLSPEC +#define DECLSPEC +#endif /* __SYMBIAN32__ */ + +/* Force structure packing at 4 byte alignment. + This is necessary if the header is included in code which has structure + packing set to an alternate value, say for loading structures from disk. + The packing is reset to the previous value in close_code.h + */ +#if defined(_MSC_VER) || defined(__MWERKS__) || defined(__BORLANDC__) +#ifdef _MSC_VER +#pragma warning(disable: 4103) +#endif +#ifdef __BORLANDC__ +#pragma nopackwarning +#endif +#ifdef _M_X64 +/* Use 8-byte alignment on 64-bit architectures, so pointers are aligned */ +#pragma pack(push,8) +#else +#pragma pack(push,4) +#endif +#endif /* Compiler needs structure packing set */ + +/* Set up compiler-specific options for inlining functions */ +#ifndef SDL_INLINE_OKAY +#ifdef __GNUC__ +#define SDL_INLINE_OKAY +#else +/* Add any special compiler-specific cases here */ +#if defined(_MSC_VER) || defined(__BORLANDC__) || \ + defined(__DMC__) || defined(__SC__) || \ + defined(__WATCOMC__) || defined(__LCC__) || \ + defined(__DECC) +#ifndef __inline__ +#define __inline__ __inline +#endif +#define SDL_INLINE_OKAY +#else +#if !defined(__MRC__) && !defined(_SGI_SOURCE) +#ifndef __inline__ +#define __inline__ inline +#endif +#define SDL_INLINE_OKAY +#endif /* Not a funky compiler */ +#endif /* Visual C++ */ +#endif /* GNU C */ +#endif /* SDL_INLINE_OKAY */ + +/* If inlining isn't supported, remove "__inline__", turning static + inlined functions into static functions (resulting in code bloat + in all files which include the offending header files) +*/ +#ifndef SDL_INLINE_OKAY +#define __inline__ +#endif + +#ifndef SDL_FORCE_INLINE +#if defined(_MSC_VER) +#define SDL_FORCE_INLINE __forceinline +#elif ( (defined(__GNUC__) && (__GNUC__ >= 4)) || defined(__clang__) ) +#define SDL_FORCE_INLINE __attribute__((always_inline)) static inline +#else +#define SDL_FORCE_INLINE static __inline__ +#endif +#endif + +/* Apparently this is needed by several Windows compilers */ +#if !defined(__MACH__) +#ifndef NULL +#ifdef __cplusplus +#define NULL 0 +#else +#define NULL ((void *)0) +#endif +#endif /* NULL */ +#endif /* ! Mac OS X - breaks precompiled headers */ diff --git a/src/SDL2/close_code.h b/src/SDL2/close_code.h new file mode 100644 index 000000000..4901482d5 --- /dev/null +++ b/src/SDL2/close_code.h @@ -0,0 +1,37 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file close_code.h + * + * This file reverses the effects of begin_code.h and should be included + * after you finish any function and structure declarations in your headers + */ + +#undef _begin_code_h + +/* Reset structure packing at previous byte alignment */ +#if defined(_MSC_VER) || defined(__MWERKS__) || defined(__WATCOMC__) || defined(__BORLANDC__) +#ifdef __BORLANDC__ +#pragma nopackwarning +#endif +#pragma pack(pop) +#endif /* Compiler needs structure packing set */ diff --git a/src/SDL2/config.guess b/src/SDL2/config.guess new file mode 100755 index 000000000..e792aac60 --- /dev/null +++ b/src/SDL2/config.guess @@ -0,0 +1,1494 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 +# Free Software Foundation, Inc. + +timestamp='2009-09-18' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner. Please send patches (context +# diff format) to and include a ChangeLog +# entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[456]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:[3456]*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T | authenticamd | genuineintel) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + echo ${UNAME_MACHINE}-pc-linux-gnu + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/src/SDL2/config.sub b/src/SDL2/config.sub new file mode 100755 index 000000000..5ecc18b6a --- /dev/null +++ b/src/SDL2/config.sub @@ -0,0 +1,1700 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 +# Free Software Foundation, Inc. + +timestamp='2009-10-07' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted GNU ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ + uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nios | nios2 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12 | picochip) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze) + basic_machine=microblaze-xilinx + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tile*) + basic_machine=tile-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/src/SDL2/configure b/src/SDL2/configure new file mode 100755 index 000000000..996820a7f --- /dev/null +++ b/src/SDL2/configure @@ -0,0 +1,15512 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$lt_ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +ECHO=${lt_ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<_LT_EOF +$* +_LT_EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +if test -z "$lt_ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if { echo_test_string=`eval $cmd`; } 2>/dev/null && + { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null + then + break + fi + done + fi + + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$ECHO" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + ECHO='print -r' + elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + ECHO='printf %s\n' + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + ECHO="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + ECHO=echo + fi + fi + fi + fi + fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +lt_ECHO=$ECHO +if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= +PACKAGE_URL= + +ac_unique_file="README.txt" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +IMG_LIBS +LIBWEBP_LIBS +LIBWEBP_CFLAGS +LIBPNG_LIBS +LIBPNG_CFLAGS +SDL2_CONFIG +SDL_LIBS +SDL_CFLAGS +PKG_CONFIG +SDL_VERSION +USE_VERSION_RC_FALSE +USE_VERSION_RC_TRUE +USE_IMAGEIO_FALSE +USE_IMAGEIO_TRUE +WINDRES +am__fastdepOBJC_FALSE +am__fastdepOBJC_TRUE +OBJCDEPMODE +ac_ct_OBJC +OBJCFLAGS +OBJC +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +LT_AGE +LT_REVISION +LT_CURRENT +LT_RELEASE +CPP +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +lt_ECHO +RANLIB +STRIP +AR +LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +EGREP +GREP +SED +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +LIBTOOL +OBJDUMP +DLLTOOL +AS +VERSION +BINARY_AGE +INTERFACE_AGE +MICRO_VERSION +MINOR_VERSION +MAJOR_VERSION +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_shared +enable_static +with_pic +enable_fast_install +with_gnu_ld +enable_libtool_lock +enable_dependency_tracking +enable_silent_rules +enable_imageio +with_sdl_prefix +with_sdl_exec_prefix +enable_sdltest +enable_bmp +enable_gif +enable_jpg +enable_jpg_shared +enable_lbm +enable_pcx +enable_png +enable_png_shared +enable_pnm +enable_tga +enable_tif +enable_tif_shared +enable_xcf +enable_xpm +enable_xv +enable_webp +enable_webp_shared +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP +OBJC +OBJCFLAGS +PKG_CONFIG +SDL_CFLAGS +SDL_LIBS +LIBPNG_CFLAGS +LIBPNG_LIBS +LIBWEBP_CFLAGS +LIBWEBP_LIBS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures this package to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-imageio use native Mac OS X frameworks for loading images + [default=yes] + --disable-sdltest Do not try to compile and run a test SDL program + --enable-bmp support loading BMP/ICO/CUR images [default=yes] + --enable-gif support loading GIF images [default=yes] + --enable-jpg support loading JPG images [default=yes] + --enable-jpg-shared dynamically load JPG support [[default=yes]] + --enable-lbm support loading LBM images [default=yes] + --enable-pcx support loading PCX images [default=yes] + --enable-png support loading PNG images [default=yes] + --enable-png-shared dynamically load PNG support [[default=yes]] + --enable-pnm support loading PNM images [default=yes] + --enable-tga support loading TGA images [default=yes] + --enable-tif support loading TIFF images [default=yes] + --enable-tif-shared dynamically load TIFF support [[default=yes]] + --enable-xcf support loading XCF images [default=yes] + --enable-xpm support loading XPM images [default=yes] + --enable-xv support loading XV images [default=yes] + --enable-webp support loading WEBP images [default=yes] + --enable-webp-shared dynamically load WEBP support [[default=yes]] + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sdl-prefix=PFX Prefix where SDL is installed (optional) + --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional) + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + OBJC Objective C compiler command + OBJCFLAGS Objective C compiler flags + PKG_CONFIG path to pkg-config utility + SDL_CFLAGS C compiler flags for SDL, overriding pkg-config + SDL_LIBS linker flags for SDL, overriding pkg-config + LIBPNG_CFLAGS + C compiler flags for LIBPNG, overriding pkg-config + LIBPNG_LIBS linker flags for LIBPNG, overriding pkg-config + LIBWEBP_CFLAGS + C compiler flags for LIBWEBP, overriding pkg-config + LIBWEBP_LIBS + linker flags for LIBWEBP, overriding pkg-config + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to the package provider. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +configure +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_objc_try_compile LINENO +# ----------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_objc_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_objc_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_objc_try_compile + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + +# Making releases: +# MICRO_VERSION += 1; +# INTERFACE_AGE += 1; +# BINARY_AGE += 1; +# if any functions have been added, set INTERFACE_AGE to 0. +# if backwards compatibility has been broken, +# set BINARY_AGE and INTERFACE_AGE to 0. + +MAJOR_VERSION=2 +MINOR_VERSION=0 +MICRO_VERSION=0 +INTERFACE_AGE=0 +BINARY_AGE=0 +VERSION=$MAJOR_VERSION.$MINOR_VERSION.$MICRO_VERSION + + + + + + + + +# libtool versioning +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.2.6' +macro_revision='1.3012' + + + + + + + + + + + + + +ltmain="$ac_aux_dir/ltmain.sh" + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$ac_tool_prefix"; then + for ac_prog in "dumpbin -symbols" "link -dump -symbols" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in "dumpbin -symbols" "link -dump -symbols" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:3987: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:3990: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:3993: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + beos*) + # On BeOS, this test takes a really really long time. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ + = "XX$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } + + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + lt_cv_deplibs_check_method=pass_all + ;; + +cegcc) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +else + AR="$ac_cv_prog_AR" +fi + +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + + + + + + + + + + + + + + + + + + + + + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line 5204 "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + +# Set options +enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AS="${ac_tool_prefix}as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 +$as_echo "$AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AS="as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 +$as_echo "$ac_ct_AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + + ;; +esac + +test -z "$AS" && AS=as + + + + + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + enable_dlopen=no + + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; pic_mode="$withval" +else + pic_mode=default +fi + + +test -z "$pic_mode" && pic_mode=default + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + + + + + + + + + + + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7031: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:7035: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl*) + # IBM XL C 8.0/Fortran 10.1 on PPC + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 +$as_echo "$lt_prog_compiler_pic" >&6; } + + + + + + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7370: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:7374: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7475: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:7479: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7530: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:7534: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag= + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' + archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + whole_archive_flag_spec='' + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=echo + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld='+b $libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo(void) {} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + archive_cmds_need_lc=no + else + archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 +$as_echo "$archive_cmds_need_lc" >&6; } + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + #soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo ${libname} | sed -e 's/^lib//'`${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + #soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo ${libname} | $SED -e 's/^lib//'`${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix[3-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # Some binutils ld are patched to set DT_RUNPATH + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line 9899 "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line 9995 "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report which library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + +LT_RELEASE=$MAJOR_VERSION.$MINOR_VERSION +LT_CURRENT=`expr $MICRO_VERSION - $INTERFACE_AGE` +LT_REVISION=$INTERFACE_AGE +LT_AGE=`expr $BINARY_AGE - $INTERFACE_AGE` + + + + + + + + +am__api_version='1.13' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + + PACKAGE=SDL2_image + VERSION=$VERSION + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=m +ac_cpp='$OBJCPP $CPPFLAGS' +ac_compile='$OBJC -c $OBJCFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$OBJC -o conftest$ac_exeext $OBJCFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_objc_compiler_gnu +if test -n "$ac_tool_prefix"; then + for ac_prog in gcc objcc objc cc CC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJC"; then + ac_cv_prog_OBJC="$OBJC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJC=$ac_cv_prog_OBJC +if test -n "$OBJC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJC" >&5 +$as_echo "$OBJC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$OBJC" && break + done +fi +if test -z "$OBJC"; then + ac_ct_OBJC=$OBJC + for ac_prog in gcc objcc objc cc CC +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJC"; then + ac_cv_prog_ac_ct_OBJC="$ac_ct_OBJC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJC=$ac_cv_prog_ac_ct_OBJC +if test -n "$ac_ct_OBJC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJC" >&5 +$as_echo "$ac_ct_OBJC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_OBJC" && break +done + + if test "x$ac_ct_OBJC" = x; then + OBJC="gcc" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJC=$ac_ct_OBJC + fi +fi + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for Objective C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Objective C compiler" >&5 +$as_echo_n "checking whether we are using the GNU Objective C compiler... " >&6; } +if ${ac_cv_objc_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_objc_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_objc_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objc_compiler_gnu" >&5 +$as_echo "$ac_cv_objc_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GOBJC=yes +else + GOBJC= +fi +ac_test_OBJCFLAGS=${OBJCFLAGS+set} +ac_save_OBJCFLAGS=$OBJCFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $OBJC accepts -g" >&5 +$as_echo_n "checking whether $OBJC accepts -g... " >&6; } +if ${ac_cv_prog_objc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_objc_werror_flag=$ac_objc_werror_flag + ac_objc_werror_flag=yes + ac_cv_prog_objc_g=no + OBJCFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_objc_try_compile "$LINENO"; then : + ac_cv_prog_objc_g=yes +else + OBJCFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_objc_try_compile "$LINENO"; then : + +else + ac_objc_werror_flag=$ac_save_objc_werror_flag + OBJCFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_objc_try_compile "$LINENO"; then : + ac_cv_prog_objc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_objc_werror_flag=$ac_save_objc_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_objc_g" >&5 +$as_echo "$ac_cv_prog_objc_g" >&6; } +if test "$ac_test_OBJCFLAGS" = set; then + OBJCFLAGS=$ac_save_OBJCFLAGS +elif test $ac_cv_prog_objc_g = yes; then + if test "$GOBJC" = yes; then + OBJCFLAGS="-g -O2" + else + OBJCFLAGS="-g" + fi +else + if test "$GOBJC" = yes; then + OBJCFLAGS="-O2" + else + OBJCFLAGS= + fi +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +depcc="$OBJC" am_compiler_list='gcc3 gcc' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_OBJC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_OBJC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_OBJC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_OBJC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_OBJC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_OBJC_dependencies_compiler_type" >&6; } +OBJCDEPMODE=depmode=$am_cv_OBJC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_OBJC_dependencies_compiler_type" = gcc3; then + am__fastdepOBJC_TRUE= + am__fastdepOBJC_FALSE='#' +else + am__fastdepOBJC_TRUE='#' + am__fastdepOBJC_FALSE= +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 +$as_echo_n "checking for inline... " >&6; } +if ${ac_cv_c_inline+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_c_inline=no +for ac_kw in inline __inline__ __inline; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifndef __cplusplus +typedef int foo_t; +static $ac_kw foo_t static_foo () {return 0; } +$ac_kw foo_t foo () {return 0; } +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_inline=$ac_kw +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test "$ac_cv_c_inline" != no && break +done + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 +$as_echo "$ac_cv_c_inline" >&6; } + +case $ac_cv_c_inline in + inline | yes) ;; + *) + case $ac_cv_c_inline in + no) ac_val=;; + *) ac_val=$ac_cv_c_inline;; + esac + cat >>confdefs.h <<_ACEOF +#ifndef __cplusplus +#define inline $ac_val +#endif +_ACEOF + ;; +esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +if test -z "$host_alias"; then + hostaliaswindres= +else + hostaliaswindres="$host_alias-windres" +fi +for ac_prog in windres $hostaliaswindres $host_os-windres +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_WINDRES+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$WINDRES"; then + ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_WINDRES="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +WINDRES=$ac_cv_prog_WINDRES +if test -n "$WINDRES"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WINDRES" >&5 +$as_echo "$WINDRES" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$WINDRES" && break +done + + +case "$host" in + *-*-beos*) + ac_default_prefix=/boot/develop/tools/gnupro + ;; + *-*-cygwin* | *-*-mingw32*) + if test "$build" != "$host"; then # cross-compiling + # Default cross-compile location + ac_default_prefix=/usr/local/cross-tools/i386-mingw32 + else + # Look for the location of the tools and install there + if test "$BUILD_PREFIX" != ""; then + ac_default_prefix=$BUILD_PREFIX + fi + fi + if test x$WINDRES != x; then + use_version_rc=true + fi + ;; + *-*-darwin*) + # Check whether --enable-imageio was given. +if test "${enable_imageio+set}" = set; then : + enableval=$enable_imageio; +else + enable_imageio=yes +fi + + if test x$enable_imageio = xyes; then + IMG_LIBS="-Wl,-framework,ApplicationServices $IMG_LIBS" + else + CFLAGS="$CFLAGS -DSDL_IMAGE_USE_COMMON_BACKEND" + fi + ;; +esac + if test x$enable_imageio = xyes; then + USE_IMAGEIO_TRUE= + USE_IMAGEIO_FALSE='#' +else + USE_IMAGEIO_TRUE='#' + USE_IMAGEIO_FALSE= +fi + + if test x$use_version_rc = xtrue; then + USE_VERSION_RC_TRUE= + USE_VERSION_RC_FALSE='#' +else + USE_VERSION_RC_TRUE='#' + USE_VERSION_RC_FALSE= +fi + + +base_libdir=`echo \${libdir} | sed 's/.*\/\(.*\)/\1/; q'` + +find_lib() +{ + gcc_bin_path=`$CC -print-search-dirs 2>/dev/null | fgrep programs: | sed 's/[^=]*=\(.*\)/\1/' | sed 's/:/ /g'` + gcc_lib_path=`$CC -print-search-dirs 2>/dev/null | fgrep libraries: | sed 's/[^=]*=\(.*\)/\1/' | sed 's/:/ /g'` + env_lib_path=`echo $LIBS $LDFLAGS $* | sed 's/-L[ ]*//g'` + if test "$cross_compiling" = yes; then + host_lib_path="" + else + host_lib_path="/usr/$base_libdir /usr/local/$base_libdir" + fi + for path in $gcc_bin_path $gcc_lib_path $env_lib_path $host_lib_path; do + lib=`ls -- $path/$1 2>/dev/null | sed -e '/\.so\..*\./d' -e 's,.*/,,' | sort | tail -1` + if test x$lib != x; then + echo $lib + return + fi + done +} + +SDL_VERSION=2.0.0 + + + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi +else + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +fi + +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + PKG_CONFIG="" + fi + +fi + +# Check whether --with-sdl-prefix was given. +if test "${with_sdl_prefix+set}" = set; then : + withval=$with_sdl_prefix; sdl_prefix="$withval" +else + sdl_prefix="" +fi + + +# Check whether --with-sdl-exec-prefix was given. +if test "${with_sdl_exec_prefix+set}" = set; then : + withval=$with_sdl_exec_prefix; sdl_exec_prefix="$withval" +else + sdl_exec_prefix="" +fi + +# Check whether --enable-sdltest was given. +if test "${enable_sdltest+set}" = set; then : + enableval=$enable_sdltest; +else + enable_sdltest=yes +fi + + + min_sdl_version=$SDL_VERSION + + if test "x$sdl_prefix$sdl_exec_prefix" = x ; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for SDL" >&5 +$as_echo_n "checking for SDL... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$SDL_CFLAGS"; then + pkg_cv_SDL_CFLAGS="$SDL_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"sdl2 >= \$min_sdl_version\""; } >&5 + ($PKG_CONFIG --exists --print-errors "sdl2 >= $min_sdl_version") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_SDL_CFLAGS=`$PKG_CONFIG --cflags "sdl2 >= $min_sdl_version" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$SDL_LIBS"; then + pkg_cv_SDL_LIBS="$SDL_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"sdl2 >= \$min_sdl_version\""; } >&5 + ($PKG_CONFIG --exists --print-errors "sdl2 >= $min_sdl_version") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_SDL_LIBS=`$PKG_CONFIG --libs "sdl2 >= $min_sdl_version" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + SDL_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "sdl2 >= $min_sdl_version"` + else + SDL_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "sdl2 >= $min_sdl_version"` + fi + # Put the nasty error message in config.log where it belongs + echo "$SDL_PKG_ERRORS" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + sdl_pc=no +elif test $pkg_failed = untried; then + sdl_pc=no +else + SDL_CFLAGS=$pkg_cv_SDL_CFLAGS + SDL_LIBS=$pkg_cv_SDL_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + sdl_pc=yes +fi + else + sdl_pc=no + if test x$sdl_exec_prefix != x ; then + sdl_config_args="$sdl_config_args --exec-prefix=$sdl_exec_prefix" + if test x${SDL2_CONFIG+set} != xset ; then + SDL2_CONFIG=$sdl_exec_prefix/bin/sdl2-config + fi + fi + if test x$sdl_prefix != x ; then + sdl_config_args="$sdl_config_args --prefix=$sdl_prefix" + if test x${SDL2_CONFIG+set} != xset ; then + SDL2_CONFIG=$sdl_prefix/bin/sdl2-config + fi + fi + fi + + if test "x$sdl_pc" = xyes ; then + no_sdl="" + SDL2_CONFIG="pkg-config sdl2" + else + as_save_PATH="$PATH" + if test "x$prefix" != xNONE && test "$cross_compiling" != yes; then + PATH="$prefix/bin:$prefix/usr/bin:$PATH" + fi + # Extract the first word of "sdl2-config", so it can be a program name with args. +set dummy sdl2-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_SDL2_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $SDL2_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_SDL2_CONFIG="$SDL2_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_SDL2_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_path_SDL2_CONFIG" && ac_cv_path_SDL2_CONFIG="no" + ;; +esac +fi +SDL2_CONFIG=$ac_cv_path_SDL2_CONFIG +if test -n "$SDL2_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SDL2_CONFIG" >&5 +$as_echo "$SDL2_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + PATH="$as_save_PATH" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SDL - version >= $min_sdl_version" >&5 +$as_echo_n "checking for SDL - version >= $min_sdl_version... " >&6; } + no_sdl="" + + if test "$SDL2_CONFIG" = "no" ; then + no_sdl=yes + else + SDL_CFLAGS=`$SDL2_CONFIG $sdl_config_args --cflags` + SDL_LIBS=`$SDL2_CONFIG $sdl_config_args --libs` + + sdl_major_version=`$SDL2_CONFIG $sdl_config_args --version | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` + sdl_minor_version=`$SDL2_CONFIG $sdl_config_args --version | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` + sdl_micro_version=`$SDL2_CONFIG $sdl_config_args --version | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` + if test "x$enable_sdltest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_CXXFLAGS="$CXXFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $SDL_CFLAGS" + CXXFLAGS="$CXXFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SDL_LIBS" + rm -f conf.sdltest + if test "$cross_compiling" = yes; then : + echo $ac_n "cross compiling; assumed OK... $ac_c" +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include +#include +#include "SDL.h" + +char* +my_strdup (char *str) +{ + char *new_str; + + if (str) + { + new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char)); + strcpy (new_str, str); + } + else + new_str = NULL; + + return new_str; +} + +int main (int argc, char *argv[]) +{ + int major, minor, micro; + char *tmp_version; + + /* This hangs on some systems (?) + system ("touch conf.sdltest"); + */ + { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); } + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = my_strdup("$min_sdl_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_sdl_version"); + exit(1); + } + + if (($sdl_major_version > major) || + (($sdl_major_version == major) && ($sdl_minor_version > minor)) || + (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** 'sdl2-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version); + printf("*** of SDL required is %d.%d.%d. If sdl2-config is correct, then it is\n", major, minor, micro); + printf("*** best to upgrade to the required version.\n"); + printf("*** If sdl2-config was wrong, set the environment variable SDL2_CONFIG\n"); + printf("*** to point to the correct copy of sdl2-config, and remove the file\n"); + printf("*** config.cache before re-running configure\n"); + return 1; + } +} + + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + no_sdl=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + CFLAGS="$ac_save_CFLAGS" + CXXFLAGS="$ac_save_CXXFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_sdl" = x ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + fi + if test "x$no_sdl" = x ; then + : + else + if test "$SDL2_CONFIG" = "no" ; then + echo "*** The sdl2-config script installed by SDL could not be found" + echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in" + echo "*** your path, or set the SDL2_CONFIG environment variable to the" + echo "*** full path to sdl2-config." + else + if test -f conf.sdltest ; then + : + else + echo "*** Could not run SDL test program, checking why..." + CFLAGS="$CFLAGS $SDL_CFLAGS" + CXXFLAGS="$CXXFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SDL_LIBS" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include "SDL.h" + +int main(int argc, char *argv[]) +{ return 0; } +#undef main +#define main K_and_R_C_main + +int +main () +{ + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding SDL or finding the wrong" + echo "*** version of SDL. If it is not finding SDL, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" +else + echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means SDL was incorrectly installed" + echo "*** or that you have moved SDL since it was installed. In the latter case, you" + echo "*** may want to edit the sdl2-config script: $SDL2_CONFIG" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS="$ac_save_CFLAGS" + CXXFLAGS="$ac_save_CXXFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + SDL_CFLAGS="" + SDL_LIBS="" + as_fn_error $? "*** SDL version $SDL_VERSION not found!" "$LINENO" 5 + + fi + + + rm -f conf.sdltest + +CFLAGS="$CFLAGS $SDL_CFLAGS" +LIBS="$LIBS $SDL_LIBS" +saved_LIBS="$LIBS" + +# Check whether --enable-bmp was given. +if test "${enable_bmp+set}" = set; then : + enableval=$enable_bmp; +else + enable_bmp=yes +fi + +# Check whether --enable-gif was given. +if test "${enable_gif+set}" = set; then : + enableval=$enable_gif; +else + enable_gif=yes +fi + +# Check whether --enable-jpg was given. +if test "${enable_jpg+set}" = set; then : + enableval=$enable_jpg; +else + enable_jpg=yes +fi + +# Check whether --enable-jpg-shared was given. +if test "${enable_jpg_shared+set}" = set; then : + enableval=$enable_jpg_shared; +else + enable_jpg_shared=yes +fi + +# Check whether --enable-lbm was given. +if test "${enable_lbm+set}" = set; then : + enableval=$enable_lbm; +else + enable_lbm=yes +fi + +# Check whether --enable-pcx was given. +if test "${enable_pcx+set}" = set; then : + enableval=$enable_pcx; +else + enable_pcx=yes +fi + +# Check whether --enable-png was given. +if test "${enable_png+set}" = set; then : + enableval=$enable_png; +else + enable_png=yes +fi + +# Check whether --enable-png-shared was given. +if test "${enable_png_shared+set}" = set; then : + enableval=$enable_png_shared; +else + enable_png_shared=yes +fi + +# Check whether --enable-pnm was given. +if test "${enable_pnm+set}" = set; then : + enableval=$enable_pnm; +else + enable_pnm=yes +fi + +# Check whether --enable-tga was given. +if test "${enable_tga+set}" = set; then : + enableval=$enable_tga; +else + enable_tga=yes +fi + +# Check whether --enable-tif was given. +if test "${enable_tif+set}" = set; then : + enableval=$enable_tif; +else + enable_tif=yes +fi + +# Check whether --enable-tif-shared was given. +if test "${enable_tif_shared+set}" = set; then : + enableval=$enable_tif_shared; +else + enable_tif_shared=yes +fi + +# Check whether --enable-xcf was given. +if test "${enable_xcf+set}" = set; then : + enableval=$enable_xcf; +else + enable_xcf=yes +fi + +# Check whether --enable-xpm was given. +if test "${enable_xpm+set}" = set; then : + enableval=$enable_xpm; +else + enable_xpm=yes +fi + +# Check whether --enable-xv was given. +if test "${enable_xv+set}" = set; then : + enableval=$enable_xv; +else + enable_xv=yes +fi + +# Check whether --enable-webp was given. +if test "${enable_webp+set}" = set; then : + enableval=$enable_webp; +else + enable_webp=yes +fi + +# Check whether --enable-webp-shared was given. +if test "${enable_webp_shared+set}" = set; then : + enableval=$enable_webp_shared; +else + enable_webp_shared=yes +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ImageIO support" >&5 +$as_echo_n "checking for ImageIO support... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_imageio" >&5 +$as_echo "$enable_imageio" >&6; } + +if (test x$enable_jpg = xyes || test x$enable_tif = xyes) && test x$enable_imageio != xyes; then + ac_fn_c_check_header_mongrel "$LINENO" "jpeglib.h" "ac_cv_header_jpeglib_h" "$ac_includes_default" +if test "x$ac_cv_header_jpeglib_h" = xyes; then : + have_jpg_hdr=yes +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jpeg_CreateDecompress in -ljpeg" >&5 +$as_echo_n "checking for jpeg_CreateDecompress in -ljpeg... " >&6; } +if ${ac_cv_lib_jpeg_jpeg_CreateDecompress+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ljpeg $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char jpeg_CreateDecompress (); +int +main () +{ +return jpeg_CreateDecompress (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_jpeg_jpeg_CreateDecompress=yes +else + ac_cv_lib_jpeg_jpeg_CreateDecompress=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_jpeg_jpeg_CreateDecompress" >&5 +$as_echo "$ac_cv_lib_jpeg_jpeg_CreateDecompress" >&6; } +if test "x$ac_cv_lib_jpeg_jpeg_CreateDecompress" = xyes; then : + have_jpg_lib=yes +fi + + if test x$have_jpg_hdr = xyes -a x$have_jpg_lib = xyes; then + if test x$enable_jpg = xyes; then + $as_echo "#define LOAD_JPG 1" >>confdefs.h + + fi + LIBS="-ljpeg $LIBS" + + case "$host" in + *-*-darwin*) + jpg_lib=`find_lib libjpeg.dylib` + ;; + *-*-cygwin* | *-*-mingw32*) + jpg_lib=`find_lib "libjpeg*.dll"` + ;; + *) + jpg_lib=`find_lib "libjpeg[0-9]*.so.*"` + if test x$jpg_lib = x; then + jpg_lib=`find_lib "libjpeg.so.*"` + fi + ;; + esac + elif test x$enable_jpg = xyes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** Unable to find JPEG library (http://www.ijg.org/)" >&5 +$as_echo "$as_me: WARNING: *** Unable to find JPEG library (http://www.ijg.org/)" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: JPG image loading disabled" >&5 +$as_echo "$as_me: WARNING: JPG image loading disabled" >&2;} + fi +fi + +if test x$enable_png = xyes -a x$enable_imageio != xyes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBPNG" >&5 +$as_echo_n "checking for LIBPNG... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$LIBPNG_CFLAGS"; then + pkg_cv_LIBPNG_CFLAGS="$LIBPNG_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpng\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libpng") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBPNG_CFLAGS=`$PKG_CONFIG --cflags "libpng" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$LIBPNG_LIBS"; then + pkg_cv_LIBPNG_LIBS="$LIBPNG_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpng\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libpng") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBPNG_LIBS=`$PKG_CONFIG --libs "libpng" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LIBPNG_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libpng"` + else + LIBPNG_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libpng"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBPNG_PKG_ERRORS" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ac_fn_c_check_header_mongrel "$LINENO" "png.h" "ac_cv_header_png_h" "$ac_includes_default" +if test "x$ac_cv_header_png_h" = xyes; then : + have_png_hdr=yes +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for png_create_read_struct in -lpng" >&5 +$as_echo_n "checking for png_create_read_struct in -lpng... " >&6; } +if ${ac_cv_lib_png_png_create_read_struct+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpng -lz $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char png_create_read_struct (); +int +main () +{ +return png_create_read_struct (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_png_png_create_read_struct=yes +else + ac_cv_lib_png_png_create_read_struct=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_png_png_create_read_struct" >&5 +$as_echo "$ac_cv_lib_png_png_create_read_struct" >&6; } +if test "x$ac_cv_lib_png_png_create_read_struct" = xyes; then : + have_png_lib=yes +fi + + +elif test $pkg_failed = untried; then + ac_fn_c_check_header_mongrel "$LINENO" "png.h" "ac_cv_header_png_h" "$ac_includes_default" +if test "x$ac_cv_header_png_h" = xyes; then : + have_png_hdr=yes +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for png_create_read_struct in -lpng" >&5 +$as_echo_n "checking for png_create_read_struct in -lpng... " >&6; } +if ${ac_cv_lib_png_png_create_read_struct+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpng -lz $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char png_create_read_struct (); +int +main () +{ +return png_create_read_struct (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_png_png_create_read_struct=yes +else + ac_cv_lib_png_png_create_read_struct=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_png_png_create_read_struct" >&5 +$as_echo "$ac_cv_lib_png_png_create_read_struct" >&6; } +if test "x$ac_cv_lib_png_png_create_read_struct" = xyes; then : + have_png_lib=yes +fi + + +else + LIBPNG_CFLAGS=$pkg_cv_LIBPNG_CFLAGS + LIBPNG_LIBS=$pkg_cv_LIBPNG_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + have_png_hdr=yes + CFLAGS="$LIBPNG_CFLAGS $CFLAGS" + have_png_lib=yes + +fi + if test x$have_png_hdr = xyes -a x$have_png_lib = xyes; then + $as_echo "#define LOAD_PNG 1" >>confdefs.h + + + case "$host" in + *-*-darwin*) + png_lib=`find_lib libpng.dylib` + ;; + *-*-cygwin* | *-*-mingw32*) + png_lib=`find_lib "libpng*.dll"` + ;; + *) + png_lib=`find_lib "libpng[0-9]*.so.*"` + if test x$png_lib = x; then + png_lib=`find_lib "libpng.so.*"` + fi + ;; + esac + else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** Unable to find PNG library (http://www.libpng.org/pub/png/libpng.html)" >&5 +$as_echo "$as_me: WARNING: *** Unable to find PNG library (http://www.libpng.org/pub/png/libpng.html)" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: PNG image loading disabled" >&5 +$as_echo "$as_me: WARNING: PNG image loading disabled" >&2;} + fi +fi + +if test x$enable_tif = xyes -a x$enable_imageio != xyes; then + ac_fn_c_check_header_mongrel "$LINENO" "tiffio.h" "ac_cv_header_tiffio_h" "$ac_includes_default" +if test "x$ac_cv_header_tiffio_h" = xyes; then : + have_tif_hdr=yes +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIFFClientOpen in -ltiff" >&5 +$as_echo_n "checking for TIFFClientOpen in -ltiff... " >&6; } +if ${ac_cv_lib_tiff_TIFFClientOpen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ltiff -lz $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char TIFFClientOpen (); +int +main () +{ +return TIFFClientOpen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_tiff_TIFFClientOpen=yes +else + ac_cv_lib_tiff_TIFFClientOpen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tiff_TIFFClientOpen" >&5 +$as_echo "$ac_cv_lib_tiff_TIFFClientOpen" >&6; } +if test "x$ac_cv_lib_tiff_TIFFClientOpen" = xyes; then : + have_tif_lib=yes +fi + + if test x$have_tif_hdr = xyes -a x$have_tif_lib = xyes; then + $as_echo "#define LOAD_TIF 1" >>confdefs.h + + + case "$host" in + *-*-darwin*) + tif_lib=`find_lib libtiff.dylib` + ;; + *-*-cygwin* | *-*-mingw32*) + tif_lib=`find_lib "libtiff-*.dll"` + ;; + *) + tif_lib=`find_lib "libtiff[0-9]*.so.*"` + if test x$tif_lib = x; then + tif_lib=`find_lib "libtiff.so.*"` + fi + ;; + esac + else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** Unable to find Tiff library (http://www.remotesensing.org/libtiff/)" >&5 +$as_echo "$as_me: WARNING: *** Unable to find Tiff library (http://www.remotesensing.org/libtiff/)" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: TIF image loading disabled" >&5 +$as_echo "$as_me: WARNING: TIF image loading disabled" >&2;} + fi +fi + +if test x$enable_webp = xyes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBWEBP" >&5 +$as_echo_n "checking for LIBWEBP... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$LIBWEBP_CFLAGS"; then + pkg_cv_LIBWEBP_CFLAGS="$LIBWEBP_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libwebp\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libwebp") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBWEBP_CFLAGS=`$PKG_CONFIG --cflags "libwebp" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$LIBWEBP_LIBS"; then + pkg_cv_LIBWEBP_LIBS="$LIBWEBP_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libwebp\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libwebp") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBWEBP_LIBS=`$PKG_CONFIG --libs "libwebp" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LIBWEBP_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libwebp"` + else + LIBWEBP_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libwebp"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBWEBP_PKG_ERRORS" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ac_fn_c_check_header_mongrel "$LINENO" "webp/decode.h" "ac_cv_header_webp_decode_h" "$ac_includes_default" +if test "x$ac_cv_header_webp_decode_h" = xyes; then : + have_webp_hdr=yes +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for WebPGetDecoderVersion in -lwebp" >&5 +$as_echo_n "checking for WebPGetDecoderVersion in -lwebp... " >&6; } +if ${ac_cv_lib_webp_WebPGetDecoderVersion+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lwebp -lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char WebPGetDecoderVersion (); +int +main () +{ +return WebPGetDecoderVersion (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_webp_WebPGetDecoderVersion=yes +else + ac_cv_lib_webp_WebPGetDecoderVersion=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_webp_WebPGetDecoderVersion" >&5 +$as_echo "$ac_cv_lib_webp_WebPGetDecoderVersion" >&6; } +if test "x$ac_cv_lib_webp_WebPGetDecoderVersion" = xyes; then : + have_webp_lib=yes +fi + + +elif test $pkg_failed = untried; then + ac_fn_c_check_header_mongrel "$LINENO" "webp/decode.h" "ac_cv_header_webp_decode_h" "$ac_includes_default" +if test "x$ac_cv_header_webp_decode_h" = xyes; then : + have_webp_hdr=yes +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for WebPGetDecoderVersion in -lwebp" >&5 +$as_echo_n "checking for WebPGetDecoderVersion in -lwebp... " >&6; } +if ${ac_cv_lib_webp_WebPGetDecoderVersion+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lwebp -lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char WebPGetDecoderVersion (); +int +main () +{ +return WebPGetDecoderVersion (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_webp_WebPGetDecoderVersion=yes +else + ac_cv_lib_webp_WebPGetDecoderVersion=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_webp_WebPGetDecoderVersion" >&5 +$as_echo "$ac_cv_lib_webp_WebPGetDecoderVersion" >&6; } +if test "x$ac_cv_lib_webp_WebPGetDecoderVersion" = xyes; then : + have_webp_lib=yes +fi + + +else + LIBWEBP_CFLAGS=$pkg_cv_LIBWEBP_CFLAGS + LIBWEBP_LIBS=$pkg_cv_LIBWEBP_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + have_webp_hdr=yes + CFLAGS="$LIBWEBP_CFLAGS $CFLAGS" + have_webp_lib=yes + +fi + if test x$have_webp_hdr = xyes -a x$have_webp_lib = xyes; then + $as_echo "#define LOAD_WEBP 1" >>confdefs.h + + + case "$host" in + *-*-darwin*) + webp_lib=`find_lib libwebp.dylib` + ;; + *-*-cygwin* | *-*-mingw32*) + webp_lib=`find_lib "libwebp*.dll"` + ;; + *) + webp_lib=`find_lib "libwebp[0-9]*.so.*"` + if test x$webp_lib = x; then + webp_lib=`find_lib "libwebp.so.*"` + fi + ;; + esac + else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** Unable to find WEBP library (http://code.google.com/intl/en-US/speed/webp/index.html)" >&5 +$as_echo "$as_me: WARNING: *** Unable to find WEBP library (http://code.google.com/intl/en-US/speed/webp/index.html)" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: WEBP Pimage loading disabled" >&5 +$as_echo "$as_me: WARNING: WEBP Pimage loading disabled" >&2;} + fi +fi + +if test x$enable_bmp = xyes; then + $as_echo "#define LOAD_BMP 1" >>confdefs.h + +fi + +if test x$enable_gif = xyes; then + $as_echo "#define LOAD_GIF 1" >>confdefs.h + +fi + +if test x$enable_lbm = xyes; then + $as_echo "#define LOAD_LBM 1" >>confdefs.h + +fi + +if test x$enable_pcx = xyes; then + $as_echo "#define LOAD_PCX 1" >>confdefs.h + +fi + +if test x$enable_pnm = xyes; then + $as_echo "#define LOAD_PNM 1" >>confdefs.h + +fi + +if test x$enable_tga = xyes; then + $as_echo "#define LOAD_TGA 1" >>confdefs.h + +fi + +if test x$enable_xcf = xyes; then + $as_echo "#define LOAD_XCF 1" >>confdefs.h + +fi + +if test x$enable_xpm = xyes; then + $as_echo "#define LOAD_XPM 1" >>confdefs.h + +fi + +if test x$enable_xv = xyes; then + $as_echo "#define LOAD_XV 1" >>confdefs.h + +fi + +if test x$enable_webp = xyes -a x$have_webp_hdr = xyes -a x$have_webp_lib = xyes; then + if test x$enable_webp_shared = xyes && test x$webp_lib != x; then + echo "-- dynamic libwebp -> $webp_lib" + cat >>confdefs.h <<_ACEOF +#define LOAD_WEBP_DYNAMIC "$webp_lib" +_ACEOF + + else + IMG_LIBS="-lwebp $IMG_LIBS" + fi +fi + +if test x$enable_tif = xyes -a x$have_tif_hdr = xyes -a x$have_tif_lib = xyes; then + if test x$enable_tif_shared = xyes && test x$tif_lib != x; then + echo "-- dynamic libtiff -> $tif_lib" + cat >>confdefs.h <<_ACEOF +#define LOAD_TIF_DYNAMIC "$tif_lib" +_ACEOF + + else + if test x$have_libjpeg = xyes; then + # Disable dynamic jpeg since we're linking it explicitly + jpg_lib='' + fi + IMG_LIBS="-ltiff -lz $IMG_LIBS" + fi +fi +if test x$enable_jpg = xyes -a x$have_jpg_hdr = xyes -a x$have_jpg_lib = xyes; then + if test x$enable_jpg_shared = xyes && test x$jpg_lib != x; then + echo "-- dynamic libjpeg -> $jpg_lib" + cat >>confdefs.h <<_ACEOF +#define LOAD_JPG_DYNAMIC "$jpg_lib" +_ACEOF + + else + IMG_LIBS="-ljpeg $IMG_LIBS" + fi +fi +if test x$enable_png = xyes -a x$have_png_hdr = xyes -a x$have_png_lib = xyes; then + if test x$enable_png_shared = xyes && test x$png_lib != x; then + echo "-- dynamic libpng -> $png_lib" + cat >>confdefs.h <<_ACEOF +#define LOAD_PNG_DYNAMIC "$png_lib" +_ACEOF + + else + IMG_LIBS="-lpng -lz $IMG_LIBS" + fi +fi + +LIBS="$saved_LIBS" + + + + +OBJCFLAGS=$CFLAGS + +# Finally create all the generated files +ac_config_files="$ac_config_files Makefile SDL2_image.spec SDL2_image.pc" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +ac_script=' +:mline +/\\$/{ + N + s,\\\n,, + b mline +} +t clear +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g +t quote +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g +t quote +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` + + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${am__fastdepOBJC_TRUE}" && test -z "${am__fastdepOBJC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepOBJC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${USE_IMAGEIO_TRUE}" && test -z "${USE_IMAGEIO_FALSE}"; then + as_fn_error $? "conditional \"USE_IMAGEIO\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${USE_VERSION_RC_TRUE}" && test -z "${USE_VERSION_RC_FALSE}"; then + as_fn_error $? "conditional \"USE_VERSION_RC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by $as_me, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Configuration commands: +$config_commands + +Report bugs to the package provider." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' +macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' +AS='`$ECHO "X$AS" | $Xsed -e "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "X$DLLTOOL" | $Xsed -e "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' +enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' +pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' +host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' +host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' +host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' +build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' +build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' +build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' +SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' +Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' +GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' +EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' +FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' +LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' +NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' +LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' +ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' +exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' +lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' +reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' +AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' +STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' +RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' +compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' +GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' +SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' +ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' +need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' +LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' +libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' +fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' +version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' +runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' +libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' +soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' +old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' +striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# Quote evaled strings. +for var in SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +deplibs_check_method \ +file_magic_cmd \ +AR \ +AR_FLAGS \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +SHELL \ +ECHO \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_wl \ +lt_prog_compiler_pic \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_flag_spec_ld \ +hardcode_libdir_separator \ +fix_srcfile_path \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec; do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Fix-up fallback echo if it was mangled by the above quoting rules. +case \$lt_ECHO in +*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` + ;; +esac + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' + + + +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "SDL2_image.spec") CONFIG_FILES="$CONFIG_FILES SDL2_image.spec" ;; + "SDL2_image.pc") CONFIG_FILES="$CONFIG_FILES SDL2_image.pc" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + + +eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "libtool":C) + + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="" + +# ### BEGIN LIBTOOL CONFIG + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Assembler program. +AS=$AS + +# DLL creation program. +DLLTOOL=$DLLTOOL + +# Object dumper program. +OBJDUMP=$OBJDUMP + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that does not interpret backslashes. +ECHO=$lt_ECHO + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# If ld is used when linking, flag to hardcode \$libdir into a binary +# during linking. This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $* )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} + +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; + esac +} + +# sed scripts: +my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[^=]*=//' + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$@"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF +esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1+=\$2" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1=\$$1\$2" +} + +_LT_EOF + ;; + esac + + + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/src/SDL2/configure.in b/src/SDL2/configure.in new file mode 100644 index 000000000..e0d7aa559 --- /dev/null +++ b/src/SDL2/configure.in @@ -0,0 +1,371 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(README.txt) + +dnl Set various version strings - taken gratefully from the GTk sources + +# Making releases: +# MICRO_VERSION += 1; +# INTERFACE_AGE += 1; +# BINARY_AGE += 1; +# if any functions have been added, set INTERFACE_AGE to 0. +# if backwards compatibility has been broken, +# set BINARY_AGE and INTERFACE_AGE to 0. + +MAJOR_VERSION=2 +MINOR_VERSION=0 +MICRO_VERSION=0 +INTERFACE_AGE=0 +BINARY_AGE=0 +VERSION=$MAJOR_VERSION.$MINOR_VERSION.$MICRO_VERSION + +AC_SUBST(MAJOR_VERSION) +AC_SUBST(MINOR_VERSION) +AC_SUBST(MICRO_VERSION) +AC_SUBST(INTERFACE_AGE) +AC_SUBST(BINARY_AGE) +AC_SUBST(VERSION) + +# libtool versioning +LT_INIT([win32-dll]) + +LT_RELEASE=$MAJOR_VERSION.$MINOR_VERSION +LT_CURRENT=`expr $MICRO_VERSION - $INTERFACE_AGE` +LT_REVISION=$INTERFACE_AGE +LT_AGE=`expr $BINARY_AGE - $INTERFACE_AGE` + +AC_SUBST(LT_RELEASE) +AC_SUBST(LT_CURRENT) +AC_SUBST(LT_REVISION) +AC_SUBST(LT_AGE) + +dnl Detect the canonical build and host environments +AC_CANONICAL_HOST + +dnl Setup for automake +AM_INIT_AUTOMAKE(SDL2_image, $VERSION) + +dnl Check for tools +AC_PROG_LIBTOOL +AC_PROG_CC +AC_PROG_OBJC +AC_C_INLINE +AC_PROG_INSTALL +AC_PROG_MAKE_SET +if test -z "$host_alias"; then + hostaliaswindres= +else + hostaliaswindres="$host_alias-windres" +fi +AC_CHECK_PROGS(WINDRES, [windres $hostaliaswindres $host_os-windres]) + +case "$host" in + *-*-beos*) + ac_default_prefix=/boot/develop/tools/gnupro + ;; + *-*-cygwin* | *-*-mingw32*) + if test "$build" != "$host"; then # cross-compiling + # Default cross-compile location + ac_default_prefix=/usr/local/cross-tools/i386-mingw32 + else + # Look for the location of the tools and install there + if test "$BUILD_PREFIX" != ""; then + ac_default_prefix=$BUILD_PREFIX + fi + fi + if test x$WINDRES != x; then + use_version_rc=true + fi + ;; + *-*-darwin*) + AC_ARG_ENABLE([imageio], [AC_HELP_STRING([--enable-imageio], [use native Mac OS X frameworks for loading images [default=yes]])], + [], [enable_imageio=yes]) + if test x$enable_imageio = xyes; then + IMG_LIBS="-Wl,-framework,ApplicationServices $IMG_LIBS" + else + CFLAGS="$CFLAGS -DSDL_IMAGE_USE_COMMON_BACKEND" + fi + ;; +esac +AM_CONDITIONAL(USE_IMAGEIO, test x$enable_imageio = xyes) +AM_CONDITIONAL(USE_VERSION_RC, test x$use_version_rc = xtrue) + +dnl set this to use on systems that use lib64 instead of lib +base_libdir=`echo \${libdir} | sed 's/.*\/\(.*\)/\1/; q'` + +dnl Function to find a library in the compiler search path +find_lib() +{ + gcc_bin_path=[`$CC -print-search-dirs 2>/dev/null | fgrep programs: | sed 's/[^=]*=\(.*\)/\1/' | sed 's/:/ /g'`] + gcc_lib_path=[`$CC -print-search-dirs 2>/dev/null | fgrep libraries: | sed 's/[^=]*=\(.*\)/\1/' | sed 's/:/ /g'`] + env_lib_path=[`echo $LIBS $LDFLAGS $* | sed 's/-L[ ]*//g'`] + if test "$cross_compiling" = yes; then + host_lib_path="" + else + host_lib_path="/usr/$base_libdir /usr/local/$base_libdir" + fi + for path in $gcc_bin_path $gcc_lib_path $env_lib_path $host_lib_path; do + lib=[`ls -- $path/$1 2>/dev/null | sed -e '/\.so\..*\./d' -e 's,.*/,,' | sort | tail -1`] + if test x$lib != x; then + echo $lib + return + fi + done +} + +dnl Check for SDL +SDL_VERSION=2.0.0 +AC_SUBST(SDL_VERSION) +AM_PATH_SDL2($SDL_VERSION, + :, + AC_MSG_ERROR([*** SDL version $SDL_VERSION not found!]) +) +CFLAGS="$CFLAGS $SDL_CFLAGS" +LIBS="$LIBS $SDL_LIBS" +saved_LIBS="$LIBS" + +dnl Check command-line options +AC_ARG_ENABLE([bmp], [AC_HELP_STRING([--enable-bmp], [support loading BMP/ICO/CUR images [default=yes]])], + [], [enable_bmp=yes]) +AC_ARG_ENABLE([gif], [AC_HELP_STRING([--enable-gif], [support loading GIF images [default=yes]])], + [], [enable_gif=yes]) +AC_ARG_ENABLE([jpg], [AC_HELP_STRING([--enable-jpg], [support loading JPG images [default=yes]])], + [], [enable_jpg=yes]) +AC_ARG_ENABLE([jpg-shared], AC_HELP_STRING([--enable-jpg-shared], [dynamically load JPG support [[default=yes]]]), + [], [enable_jpg_shared=yes]) +AC_ARG_ENABLE([lbm], [AC_HELP_STRING([--enable-lbm], [support loading LBM images [default=yes]])], + [], [enable_lbm=yes]) +AC_ARG_ENABLE([pcx], [AC_HELP_STRING([--enable-pcx], [support loading PCX images [default=yes]])], + [], [enable_pcx=yes]) +AC_ARG_ENABLE([png], [AC_HELP_STRING([--enable-png], [support loading PNG images [default=yes]])], + [], [enable_png=yes]) +AC_ARG_ENABLE([png-shared], AC_HELP_STRING([--enable-png-shared], [dynamically load PNG support [[default=yes]]]), + [], [enable_png_shared=yes]) +AC_ARG_ENABLE([pnm], [AC_HELP_STRING([--enable-pnm], [support loading PNM images [default=yes]])], + [], [enable_pnm=yes]) +AC_ARG_ENABLE([tga], [AC_HELP_STRING([--enable-tga], [support loading TGA images [default=yes]])], + [], [enable_tga=yes]) +AC_ARG_ENABLE([tif], [AC_HELP_STRING([--enable-tif], [support loading TIFF images [default=yes]])], + [], [enable_tif=yes]) +AC_ARG_ENABLE([tif-shared], AC_HELP_STRING([--enable-tif-shared], [dynamically load TIFF support [[default=yes]]]), + [], [enable_tif_shared=yes]) +AC_ARG_ENABLE([xcf], [AC_HELP_STRING([--enable-xcf], [support loading XCF images [default=yes]])], + [], [enable_xcf=yes]) +AC_ARG_ENABLE([xpm], [AC_HELP_STRING([--enable-xpm], [support loading XPM images [default=yes]])], + [], [enable_xpm=yes]) +AC_ARG_ENABLE([xv], [AC_HELP_STRING([--enable-xv], [support loading XV images [default=yes]])], + [], [enable_xv=yes]) +AC_ARG_ENABLE([webp], [AC_HELP_STRING([--enable-webp], [support loading WEBP images [default=yes]])], + [], [enable_webp=yes]) +AC_ARG_ENABLE([webp-shared], AC_HELP_STRING([--enable-webp-shared], [dynamically load WEBP support [[default=yes]]]), + [], [enable_webp_shared=yes]) + +dnl Show a message when we use ImageIO support so it's not a surprise +AC_MSG_CHECKING([for ImageIO support]) +AC_MSG_RESULT($enable_imageio) + +if (test x$enable_jpg = xyes || test x$enable_tif = xyes) && test x$enable_imageio != xyes; then + AC_CHECK_HEADER([jpeglib.h], [have_jpg_hdr=yes]) + AC_CHECK_LIB([jpeg], [jpeg_CreateDecompress], [have_jpg_lib=yes]) + if test x$have_jpg_hdr = xyes -a x$have_jpg_lib = xyes; then + if test x$enable_jpg = xyes; then + AC_DEFINE([LOAD_JPG]) + fi + LIBS="-ljpeg $LIBS" + + case "$host" in + *-*-darwin*) + jpg_lib=[`find_lib libjpeg.dylib`] + ;; + *-*-cygwin* | *-*-mingw32*) + jpg_lib=[`find_lib "libjpeg*.dll"`] + ;; + *) + jpg_lib=[`find_lib "libjpeg[0-9]*.so.*"`] + if test x$jpg_lib = x; then + jpg_lib=[`find_lib "libjpeg.so.*"`] + fi + ;; + esac + elif test x$enable_jpg = xyes; then + AC_MSG_WARN([*** Unable to find JPEG library (http://www.ijg.org/)]) + AC_MSG_WARN([JPG image loading disabled]) + fi +fi + +if test x$enable_png = xyes -a x$enable_imageio != xyes; then + PKG_CHECK_MODULES([LIBPNG], [libpng], [dnl + have_png_hdr=yes + CFLAGS="$LIBPNG_CFLAGS $CFLAGS" + have_png_lib=yes + ], [dnl + AC_CHECK_HEADER([png.h], [have_png_hdr=yes]) + AC_CHECK_LIB([png], [png_create_read_struct], [have_png_lib=yes], [], [-lz]) + ]) + if test x$have_png_hdr = xyes -a x$have_png_lib = xyes; then + AC_DEFINE([LOAD_PNG]) + + case "$host" in + *-*-darwin*) + png_lib=[`find_lib libpng.dylib`] + ;; + *-*-cygwin* | *-*-mingw32*) + png_lib=[`find_lib "libpng*.dll"`] + ;; + *) + png_lib=[`find_lib "libpng[0-9]*.so.*"`] + if test x$png_lib = x; then + png_lib=[`find_lib "libpng.so.*"`] + fi + ;; + esac + else + AC_MSG_WARN([*** Unable to find PNG library (http://www.libpng.org/pub/png/libpng.html)]) + AC_MSG_WARN([PNG image loading disabled]) + fi +fi + +if test x$enable_tif = xyes -a x$enable_imageio != xyes; then + AC_CHECK_HEADER([tiffio.h], [have_tif_hdr=yes]) + AC_CHECK_LIB([tiff], [TIFFClientOpen], [have_tif_lib=yes], [], [-lz]) + if test x$have_tif_hdr = xyes -a x$have_tif_lib = xyes; then + AC_DEFINE([LOAD_TIF]) + + case "$host" in + *-*-darwin*) + tif_lib=[`find_lib libtiff.dylib`] + ;; + *-*-cygwin* | *-*-mingw32*) + tif_lib=[`find_lib "libtiff-*.dll"`] + ;; + *) + tif_lib=[`find_lib "libtiff[0-9]*.so.*"`] + if test x$tif_lib = x; then + tif_lib=[`find_lib "libtiff.so.*"`] + fi + ;; + esac + else + AC_MSG_WARN([*** Unable to find Tiff library (http://www.remotesensing.org/libtiff/)]) + AC_MSG_WARN([TIF image loading disabled]) + fi +fi + +if test x$enable_webp = xyes; then + PKG_CHECK_MODULES([LIBWEBP], [libwebp], [dnl + have_webp_hdr=yes + CFLAGS="$LIBWEBP_CFLAGS $CFLAGS" + have_webp_lib=yes + ], [dnl + AC_CHECK_HEADER([webp/decode.h], [have_webp_hdr=yes]) + AC_CHECK_LIB([webp], [WebPGetDecoderVersion], [have_webp_lib=yes], [], [-lm]) + ]) + if test x$have_webp_hdr = xyes -a x$have_webp_lib = xyes; then + AC_DEFINE([LOAD_WEBP]) + + case "$host" in + *-*-darwin*) + webp_lib=[`find_lib libwebp.dylib`] + ;; + *-*-cygwin* | *-*-mingw32*) + webp_lib=[`find_lib "libwebp*.dll"`] + ;; + *) + webp_lib=[`find_lib "libwebp[0-9]*.so.*"`] + if test x$webp_lib = x; then + webp_lib=[`find_lib "libwebp.so.*"`] + fi + ;; + esac + else + AC_MSG_WARN([*** Unable to find WEBP library (http://code.google.com/intl/en-US/speed/webp/index.html)]) + AC_MSG_WARN([WEBP Pimage loading disabled]) + fi +fi + +if test x$enable_bmp = xyes; then + AC_DEFINE([LOAD_BMP]) +fi + +if test x$enable_gif = xyes; then + AC_DEFINE([LOAD_GIF]) +fi + +if test x$enable_lbm = xyes; then + AC_DEFINE([LOAD_LBM]) +fi + +if test x$enable_pcx = xyes; then + AC_DEFINE([LOAD_PCX]) +fi + +if test x$enable_pnm = xyes; then + AC_DEFINE([LOAD_PNM]) +fi + +if test x$enable_tga = xyes; then + AC_DEFINE([LOAD_TGA]) +fi + +if test x$enable_xcf = xyes; then + AC_DEFINE([LOAD_XCF]) +fi + +if test x$enable_xpm = xyes; then + AC_DEFINE([LOAD_XPM]) +fi + +if test x$enable_xv = xyes; then + AC_DEFINE([LOAD_XV]) +fi + +if test x$enable_webp = xyes -a x$have_webp_hdr = xyes -a x$have_webp_lib = xyes; then + if test x$enable_webp_shared = xyes && test x$webp_lib != x; then + echo "-- dynamic libwebp -> $webp_lib" + AC_DEFINE_UNQUOTED(LOAD_WEBP_DYNAMIC, "$webp_lib") + else + IMG_LIBS="-lwebp $IMG_LIBS" + fi +fi + +if test x$enable_tif = xyes -a x$have_tif_hdr = xyes -a x$have_tif_lib = xyes; then + if test x$enable_tif_shared = xyes && test x$tif_lib != x; then + echo "-- dynamic libtiff -> $tif_lib" + AC_DEFINE_UNQUOTED(LOAD_TIF_DYNAMIC, "$tif_lib") + else + if test x$have_libjpeg = xyes; then + # Disable dynamic jpeg since we're linking it explicitly + jpg_lib='' + fi + IMG_LIBS="-ltiff -lz $IMG_LIBS" + fi +fi +if test x$enable_jpg = xyes -a x$have_jpg_hdr = xyes -a x$have_jpg_lib = xyes; then + if test x$enable_jpg_shared = xyes && test x$jpg_lib != x; then + echo "-- dynamic libjpeg -> $jpg_lib" + AC_DEFINE_UNQUOTED(LOAD_JPG_DYNAMIC, "$jpg_lib") + else + IMG_LIBS="-ljpeg $IMG_LIBS" + fi +fi +if test x$enable_png = xyes -a x$have_png_hdr = xyes -a x$have_png_lib = xyes; then + if test x$enable_png_shared = xyes && test x$png_lib != x; then + echo "-- dynamic libpng -> $png_lib" + AC_DEFINE_UNQUOTED(LOAD_PNG_DYNAMIC, "$png_lib") + else + IMG_LIBS="-lpng -lz $IMG_LIBS" + fi +fi + +LIBS="$saved_LIBS" + +AC_SUBST([WINDRES]) +AC_SUBST([IMG_LIBS]) + +OBJCFLAGS=$CFLAGS + +# Finally create all the generated files +AC_OUTPUT([ +Makefile +SDL2_image.spec +SDL2_image.pc +]) diff --git a/src/SDL2/debian/changelog b/src/SDL2/debian/changelog new file mode 100644 index 000000000..fe8f5798a --- /dev/null +++ b/src/SDL2/debian/changelog @@ -0,0 +1,321 @@ +libsdl2-image (2.0.0) unstable; urgency=low + + * Updated library version to 2.0 for consistency with SDL 2.0 + + -- Sam Lantinga Tue, 26 Feb 2013 15:48:41 -0800 + +libsdl2-image (1.2.12) unstable; urgency=low + + * sdl-image for SDL2. Initial release. + + -- Sam Lantinga Fri, 15 Feb 2013 13:09:44 -0800 + +sdl-image1.2 (1.2.10-3) unstable; urgency=low + + [ Felix Geyer ] + * Drop ancient Conflicts. + * Wrap (Build-)Depends in debian/control. + * Switch to dh(1) debian/rules. + * Enable parallel building. + * Drop .la file. + * Drop local dpkg-shlibdeps overrides. + * Remove all patches since they were disabled anyway. + * Switch to source format 3.0 (quilt). + * Update to Standards-Version 3.9.2, no further changes necessary. + * Switch to debhelper compat level v9. + - Exports build flags. + - Build for multiarch. (Closes: #651006) + * Override lintian warning package-name-doesnt-match-sonames. + * Fix building with libpng 1.5. (Closes: #636007) + - Add libpng15.diff. + - (Build-)Depend on libpng-dev instead of libpng12-dev. + * Add myself as uploader. + * Update Vcs control fields to the new git repository. + * Improve copyright file. + + [ Dominique Dumont ] + * control: allowed DM uploads. Set dev pkg to multi-arch: same + * copyright: converted to DEP-5 debian/copyright + * source: override package-needs-versioned-debhelper-build-depends + warning + + -- Felix Geyer Thu, 01 Dec 2011 13:11:22 +0100 + +sdl-image1.2 (1.2.10-2.1) unstable; urgency=low + + * Non-maintainer upload. + * Empty dependency_libs (Closes: #619536). + * Fix configure flags (Closes: #591190). + + -- Luk Claes Sun, 26 Jun 2011 17:58:00 +0200 + +sdl-image1.2 (1.2.10-2) unstable; urgency=low + + [ Aurelien Jarno ] + * Add myself to uploaders. + * Bump shlibs (Closes: #563452). + * (Build-)Depends on libjpeg-dev instead of libjpeg62-dev + (Closes: #569241). + + -- Aurelien Jarno Thu, 11 Feb 2010 15:12:43 +0100 + +sdl-image1.2 (1.2.10-1) unstable; urgency=low + + [ Barry deFreese ] + * Have SDL Team take over maintenance. + + With permission from Michael Koch. + + Thanks to Michael for all of his previous work. + * Add myself to uploaders. + * Add VCS tags. + * New upstream release. + + -- Barry deFreese Mon, 16 Nov 2009 14:30:11 -0500 + +sdl-image1.2 (1.2.8-1) unstable; urgency=low + + * New upstream release. + - adds pkg-config support (Closes: #515123) + + -- Michael Koch Thu, 22 Oct 2009 23:09:13 +0200 + +sdl-image1.2 (1.2.7-2) unstable; urgency=low + + * debian/control: + - Added ${misc:Depends} to all Depends. + - Updated Standards-Version to 3.8.3. + + -- Michael Koch Mon, 31 Aug 2009 08:17:06 +0200 + +sdl-image1.2 (1.2.7-1) unstable; urgency=low + + * New upstream release. + * debian/control: Build-Depends on debhelper (>= 5). + * debian/control: Updated Standards-Version to 3.8.2. + * debian/control: Add Homepage field. + * debian/watch: Updated watch file for easier upstream updates. + + -- Michael Koch Tue, 21 Jul 2009 21:08:48 +0200 + +sdl-image1.2 (1.2.6-3) unstable; urgency=low + + * CVE-2008-0544: Fix heap based buffer overflow. + * Force library to link libjpeg and libtif and not dlopen them during + runtime. + + -- Michael Koch Tue, 05 Feb 2008 23:10:31 +0100 + +sdl-image1.2 (1.2.6-2) unstable; urgency=high + + * Fixed buffer overflow when reading GIFs. CVE pending. + * Updated Standards-Version to 3.7.3. + + -- Michael Koch Sun, 27 Jan 2008 23:44:23 +0100 + +sdl-image1.2 (1.2.6-1) unstable; urgency=low + + * New upstream release. Closes: #437005. + * Replaced obsolete ${Source-Version}. + * Handle errors better in clean target. + + -- Michael Koch Sat, 11 Aug 2007 16:42:46 +0200 + +sdl-image1.2 (1.2.5-3) unstable; urgency=low + + * Updated config.guess and config.sub (Closes: #401526). + + -- Michael Koch Tue, 16 Jan 2007 08:38:19 +0100 + +sdl-image1.2 (1.2.5-2) unstable; urgency=low + + * Added patch to make SDL_image 1.2 less segfault. Thanks to Margarita + Manterola for the patch (Closes: #378173). + + -- Michael Koch Sat, 22 Jul 2006 04:30:39 +0000 + +sdl-image1.2 (1.2.5-1) unstable; urgency=low + + * New upstream release + * Updated Build-Depends and Depends to SDL 1.2.10 + * Updated minimum shlibs version to 1.2.5 + * Updated Standards-Version to 3.7.2 + * Simplified watch file + * Fixed address of FSF in debian/copyright + + -- Michael Koch Fri, 9 Jun 2006 07:21:47 +0000 + +sdl-image1.2 (1.2.4-1) unstable; urgency=low + + * New upstream release + * debian/copyright: Fixed header for license text (Closes: #290199) + * Updated config.guess and config.sub (Closes: #267493) + * debian/rules: Use dh_installman instead of dh_installmanpages + + -- Michael Koch Wed, 23 Feb 2005 10:44:58 +0000 + +sdl-image1.2 (1.2.3-6) unstable; urgency=low + + * Fixed download URL in debian/copyright + * Added debian/watch + * Add -ltiff before -ljpeg. Added debian/patches/bug267169.diff for this + (Closes: #267169) + + -- Michael Koch Tue, 16 Nov 2004 18:24:14 +0000 + +sdl-image1.2 (1.2.3-5) unstable; urgency=low + + * libsdl-image1.2-dev: Updated Depends to use libtiff4-dev (Closes: #262160) + Thanks to Jochen Friedrich. + + -- Michael Koch Fri, 30 Jul 2004 20:27:09 +0200 + +sdl-image1.2 (1.2.3-4) unstable; urgency=low + + * Build-Depend on libtiff4-dev. + * debian/copyright: Updated download URL, author mail address + and copyrigth notice. + * libsdl-image1.2-dev: Updated section to libdevel. + + -- Michael Koch Sun, 25 Jul 2004 20:44:14 +0200 + +sdl-image1.2 (1.2.3-3) unstable; urgency=low + + * Added patch from Ivo Danihelka + (Closes: 256660). + * Updated Standards-Version to 3.6.1. + * Build depend on debhelper (>= 4.0.0). + * Use debian/compat instead of DH_COMPAT. + * Raised debhelper compat level to 4. + * Use dh_install instead of dh_movefiles. + + -- Michael Koch Thu, 8 Jul 2004 11:39:58 +0200 + +sdl-image1.2 (1.2.3-2) unstable; urgency=low + + * Build-Depends on libpng12-dev not libpng3-dev. + * libsdl-image1.2-dev: Depends on libpng12-dev instead of libpng3-dev. + * Bumped Standards-Version to 3.5.10. + + -- Michael Koch Mon, 23 Jun 2003 05:38:52 +0000 + +sdl-image1.2 (1.2.3-1) unstable; urgency=low + + * New upstream version. + * Conflicts with packages explicitely linking libpng2 (Closes: #178802). + * Bumped Standards-Version to 3.5.9. + * Fixed "noopt" handling in debian/rules. + * Changed debian/shlibs.local to fix libsdl1.2debian dependency. + + -- Michael Koch Thu, 20 Mar 2003 12:48:26 +0100 + +sdl-image1.2 (1.2.2-5) unstable; urgency=low + + * Bumped Standards-Version to 3.5.8. + + -- Michael Koch Thu, 12 Dec 2002 19:48:39 +0100 + +sdl-image1.2 (1.2.2-4) unstable; urgency=low + + * Support "noopt" option and dropped "debug". + * Enabled TIFF and XCF support. + * Cleaned up debian rules. + + -- Michael Koch Wed, 23 Oct 2002 17:07:37 +0200 + +sdl-image1.2 (1.2.2-3) unstable; urgency=low + + * Updated Standard-Version to 3.5.7. + + -- Michael Koch Thu, 5 Sep 2002 16:59:08 +0200 + +sdl-image1.2 (1.2.2-2) unstable; urgency=low + + * New maintainer (Closes: #158940). + * Build-Depend on libpng3-dev (Closes: #153871, #156033). + * libsdl-image1.2-dev depend on libpng3-dev. + * added AM_MAINTAINER_MODE to configure.in to get rid of conflicts to + aclocal, autoconf, automake (Closes: #153851). + * use debhelper compat mode 3 (Build-Depend on debhelper >> 3.0). + * add support for DEB_HOST_GNU_TYPE, DEB_BUILD_GNU_TYPE and + DEB_BUILD_OPTIONS. + * removed postinst script. debhelper does all automatically. + * reworked debian/rules + + -- Michael Koch Wed, 4 Sep 2002 09:29:11 +0200 + +sdl-image1.2 (1.2.2-1) unstable; urgency=low + + * new upstream version (closes: #150670) + * build-depend on new SDL 1.2.4 + * patch acinclude.m4, configure.in + * re-run libtoolize --force --copy; aclocal; patch aclocal.m4 to include + SDL_LIBS_FOR_LIBS, then run automake --foreign; autoconf + * depend on libpng-dev, not on (older) libpng2-dev (closes: #152302) + + -- Christian T. Steigies Mon, 8 Jul 2002 23:03:25 -0400 + +sdl-image1.2 (1.2.1-2) unstable; urgency=low + + * libsdl-image1.2-dev should depend on -dev packages, thanks Junichi + * Ok, I've had enough. To make it build on slower arches as well we now + build-conflict with aclocal, autoconf, automake + * "missing" has to be executable + + -- Christian T. Steigies Sat, 13 Apr 2002 22:15:49 -0400 + +sdl-image1.2 (1.2.1-1.1) unstable; urgency=low + + * NMU + * built against libsdl1.2 1.2.2-3.3 + * acinclude.m4: removed copy of sdl.m4 + * configure.in: IMG_LIBS should use SDL_LIBS_FOR_LIBS, not SDL_LIBS + * re-ran libtoolize --force --copy; aclocal; automake --foreign; autoconf + * debian/control: + - updated Build-Depends and Depends on libsdl1.2 to 1.2.2-3.3 + - tweaked package descriptions + + -- Branden Robinson Tue, 25 Dec 2001 05:45:38 -0500 + +sdl-image1.2 (1.2.1-1) unstable; urgency=low + + * new upstream version + * tried to add Branden's fixes again in Makefile.am, aclocal.m4 and + configure.in + * re-ran libtoolize --force --copy; aclocal; automake --foreign; autoconf + + -- Christian T. Steigies Tue, 18 Dec 2001 21:21:39 -0500 + +sdl-image1.2 (1.2.0-2) unstable; urgency=low + + * fix section in control file, libsdl-image1.2 goes in libs, -dev in devel + + -- Christian T. Steigies Mon, 12 Nov 2001 21:15:11 -0500 + +sdl-image1.2 (1.2.0-1.1) unstable; urgency=low + + * NMU to fix the Big SDL and X Extension Library Problem (Closes: #115051) + * built against libsdl1.2 1.2.2-3.1 + * Thanks to Eric Gillespie, Jr. for help preparing this solution. + * Makefile.am: use @SDL_LIBS_FOR_LIBS@ for the SDL image library itself, + and @SDL_LIBS@ for the sample program + * acinclude.m4: removed copy of sdl.m4 + * configure.in: don't define LIBS here + * re-ran libtoolize --force --copy; aclocal; automake --foreign; autoconf + * debian/control: + - bumped Standards-Version + - add Build-Depends on zlib1g-dev + - add versioning of (>= 1.2.2-3.1) to Build-Dep on libsdl1.2-dev + (it contains the logic for @SDL_LIBS_FOR_LIBS@) + - add versioning of (>= 1.2.2-3.1) to libsdl-image1.2-dev's dependency on + libsdl1.2-dev + * debian/postinst: only run ldconfig if $1 = "configure" + * debian/rules: + - remove some crack-smoking file deletion from the build rule (it always + fails, and is taken care of in the install rule) + + -- Branden Robinson Wed, 10 Oct 2001 12:33:40 -0500 + +sdl-image1.2 (1.2.0-1) unstable; urgency=low + + * sdl-image for SDL1.2. Initial Release. (closes: #94452) + + -- Christian T. Steigies Fri, 20 Apr 2001 15:19:03 -0400 diff --git a/src/SDL2/debian/compat b/src/SDL2/debian/compat new file mode 100644 index 000000000..ec635144f --- /dev/null +++ b/src/SDL2/debian/compat @@ -0,0 +1 @@ +9 diff --git a/src/SDL2/debian/control b/src/SDL2/debian/control new file mode 100644 index 000000000..5b3263318 --- /dev/null +++ b/src/SDL2/debian/control @@ -0,0 +1,47 @@ +Source: libsdl2-image +Section: libs +Priority: optional +Maintainer: Debian SDL packages maintainers +Uploaders: Barry deFreese , + Aurelien Jarno , + Felix Geyer , + Sam Lantinga +Standards-Version: 3.9.2 +Build-Depends: debhelper (>= 8.9.0~), + dh-autoreconf, + dpkg-dev (>= 1.16.1~), + libsdl2-dev (>= 2.0.0), + libjpeg-dev, + libpng-dev, + libtiff4-dev, + zlib1g-dev +Homepage: http://www.libsdl.org/projects/SDL_image/ + +Package: libsdl2-image +Architecture: any +Multi-Arch: same +Pre-Depends: ${misc:Pre-Depends} +Depends: ${misc:Depends}, + ${shlibs:Depends} +Description: Image loading library for Simple DirectMedia Layer 2.0 + This is a simple library to load images of various formats as SDL surfaces. + This library currently supports BMP, PPM, PCX, GIF, JPEG, PNG, TIFF, and XPM + formats. + . + This package contains the shared library. + +Package: libsdl2-image-dev +Section: libdevel +Architecture: any +Multi-Arch: same +Depends: ${misc:Depends}, + libsdl2-image (= ${binary:Version}), + libc6-dev, + libsdl2-dev (>= 2.0.0) +Description: development files for SDL 2.0 image loading library + This is a simple library to load images of various formats as SDL surfaces. + This library currently supports BMP, PPM, PCX, GIF, JPEG, PNG, TIFF, and XPM + formats. + . + This package contains files needed if you wish to use the SDL image + library in your own programs. diff --git a/src/SDL2/debian/copyright b/src/SDL2/debian/copyright new file mode 100644 index 000000000..1f90a843e --- /dev/null +++ b/src/SDL2/debian/copyright @@ -0,0 +1,47 @@ +Format: http://dep.debian.net/deps/dep5/ +Upstream-Name: SDL_image +Upstream-Contact: Sam Lantinga +Source: downloaded from http://www.libsdl.org/projects/SDL_image/ + +Files: * +Copyright: 1997-2013 Sam Lantinga + 2009 Eric Wing + 1990, 1991, 1993 David Koblas + 1996 Torsten Martinsen + 1998 Philippe Lavoie +License: zlib/libpng + +Files: debian/* +Copyright: 2011, Felix Geyer + 2010, Aurelien Jarno + 2009, Barry deFreese + 2002-2009 Michael Koch + 2001,2002, Christian T. Steigies +License: LGPL-2.1+ + +License: zlib/libpng + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + . + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + . + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + +License: LGPL-2.1+ + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU Lesser General Public License as published by + the Free Software Foundation; either version 2.1 of the License, or (at + your option) any later version. + . + On Debian systems, the complete text of version 2.1 of the GNU Lesser + Public License can be found in `/usr/share/common-licenses/LGPL-2.1'. + diff --git a/src/SDL2/debian/docs b/src/SDL2/debian/docs new file mode 100644 index 000000000..71dfd5bac --- /dev/null +++ b/src/SDL2/debian/docs @@ -0,0 +1 @@ +README.txt diff --git a/src/SDL2/debian/examples/Makefile b/src/SDL2/debian/examples/Makefile new file mode 100644 index 000000000..8d94bed24 --- /dev/null +++ b/src/SDL2/debian/examples/Makefile @@ -0,0 +1,14 @@ +# Makefile for showimage + +CC = gcc +CFLAGS = $(shell sdl2-config --cflags) -Wall -O +LIBS = $(shell sdl2-config --libs) -lSDL2_image +EXE = showimage + +all: $(EXE) + +showimage: showimage.c Makefile + $(CC) -o $@ $@.c $(CFLAGS) $(LIBS) + +clean: + -rm *.o $(EXE) diff --git a/src/SDL2/debian/libsdl2-image-dev.examples b/src/SDL2/debian/libsdl2-image-dev.examples new file mode 100644 index 000000000..57afbcc43 --- /dev/null +++ b/src/SDL2/debian/libsdl2-image-dev.examples @@ -0,0 +1,2 @@ +debian/examples/Makefile +showimage.c diff --git a/src/SDL2/debian/libsdl2-image-dev.install b/src/SDL2/debian/libsdl2-image-dev.install new file mode 100644 index 000000000..d05ca2e35 --- /dev/null +++ b/src/SDL2/debian/libsdl2-image-dev.install @@ -0,0 +1,4 @@ +usr/include +usr/lib/*/lib*.a +usr/lib/*/lib*.so +usr/lib/*/pkgconfig diff --git a/src/SDL2/debian/libsdl2-image.install b/src/SDL2/debian/libsdl2-image.install new file mode 100644 index 000000000..3ddde5841 --- /dev/null +++ b/src/SDL2/debian/libsdl2-image.install @@ -0,0 +1 @@ +usr/lib/*/lib*.so.* diff --git a/src/SDL2/debian/libsdl2-image.lintian-overrides b/src/SDL2/debian/libsdl2-image.lintian-overrides new file mode 100644 index 000000000..ff815a5f2 --- /dev/null +++ b/src/SDL2/debian/libsdl2-image.lintian-overrides @@ -0,0 +1 @@ +libsdl2-image: package-name-doesnt-match-sonames libSDL2-image diff --git a/src/SDL2/debian/rules b/src/SDL2/debian/rules new file mode 100755 index 000000000..df91baa82 --- /dev/null +++ b/src/SDL2/debian/rules @@ -0,0 +1,18 @@ +#!/usr/bin/make -f + +confflags = --disable-webp --disable-jpg-shared --disable-png-shared --disable-tif-shared + +%: + dh $@ --with autoreconf --parallel + +override_dh_autoreconf: + dh_autoreconf ./autogen.sh + +override_dh_auto_configure: + dh_auto_configure -- $(confflags) + +override_dh_auto_installchangelogs: + dh_auto_installchangelogs -- CHANGES + +override_dh_compress: + dh_compress -Xshowimage.c diff --git a/src/SDL2/debian/source/format b/src/SDL2/debian/source/format new file mode 100644 index 000000000..89ae9db8f --- /dev/null +++ b/src/SDL2/debian/source/format @@ -0,0 +1 @@ +3.0 (native) diff --git a/src/SDL2/debian/source/lintian-overrides b/src/SDL2/debian/source/lintian-overrides new file mode 100644 index 000000000..57c556629 --- /dev/null +++ b/src/SDL2/debian/source/lintian-overrides @@ -0,0 +1 @@ +sdl2-image source: package-needs-versioned-debhelper-build-depends 9 diff --git a/src/SDL2/debian/watch b/src/SDL2/debian/watch new file mode 100644 index 000000000..f4195a9e8 --- /dev/null +++ b/src/SDL2/debian/watch @@ -0,0 +1,2 @@ +version=3 +http://www.libsdl.org/projects/SDL_image/release/ (?:.*/)?SDL_image-?_?([\w+\d+\.]+|\d+)\.tar\.gz debian uupdate diff --git a/src/SDL2/depcomp b/src/SDL2/depcomp new file mode 100755 index 000000000..ca5ea4e1e --- /dev/null +++ b/src/SDL2/depcomp @@ -0,0 +1,584 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2006-10-15.18 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software +# Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` + tmpdepfile="$stripped.u" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + stat=$? + + if test -f "$tmpdepfile"; then : + else + stripped=`echo "$stripped" | sed 's,^.*/,,'` + tmpdepfile="$stripped.u" + fi + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + outname="$stripped.o" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add `dependent.h:' lines. + sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + "$@" || exit $? + IFS=" " + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/src/SDL2/external/jpeg-9/Android.mk b/src/SDL2/external/jpeg-9/Android.mk new file mode 100644 index 000000000..a5edbdeaf --- /dev/null +++ b/src/SDL2/external/jpeg-9/Android.mk @@ -0,0 +1,37 @@ +LOCAL_PATH:= $(call my-dir) +include $(CLEAR_VARS) + +LOCAL_ARM_MODE := arm + +LOCAL_SRC_FILES := \ + jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c \ + jmem-android.c + +# the assembler is only for the ARM version, don't break the Linux sim +ifneq ($(TARGET_ARCH),arm) +ANDROID_JPEG_NO_ASSEMBLER := true +endif + +# temp fix until we understand why this broke cnn.com +#ANDROID_JPEG_NO_ASSEMBLER := true + +ifeq ($(strip $(ANDROID_JPEG_NO_ASSEMBLER)),true) +LOCAL_SRC_FILES += jidctint.c jidctfst.c +else +LOCAL_SRC_FILES += jidctint.c jidctfst.S +endif + +LOCAL_CFLAGS += -DAVOID_TABLES +LOCAL_CFLAGS += -O3 -fstrict-aliasing -fprefetch-loop-arrays +#LOCAL_CFLAGS += -march=armv6j + +LOCAL_MODULE:= jpeg + +include $(BUILD_STATIC_LIBRARY) diff --git a/src/SDL2/external/jpeg-9/Makefile.am b/src/SDL2/external/jpeg-9/Makefile.am new file mode 100644 index 000000000..86895a1e9 --- /dev/null +++ b/src/SDL2/external/jpeg-9/Makefile.am @@ -0,0 +1,134 @@ +## Process this file with automake to produce Makefile.in +# +# Automake Makefile for the JPEG library +# +# This file is written by Bob Friesenhahn, Guido Vollbeding +# + +# Sources to build library +LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c + +# System dependent sources +SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c + +# Headers which are installed to support the library +INSTINCLUDES = jerror.h jmorecfg.h jpeglib.h + +# Headers which are not installed +OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \ + jversion.h transupp.h + +# Manual pages (Automake uses 'MANS' for itself) +DISTMANS= cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1 + +# Other documentation files +DOCS= README install.txt usage.txt wizard.txt example.c libjpeg.txt \ + structure.txt coderules.txt filelist.txt change.log + +# Makefiles for various systems +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ + makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ + makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ + makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ + makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ + makefile.mms makefile.vms makvms.opt + +# Configuration files +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms + +# Support scripts for configure +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib + +# Miscellaneous support files +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map + +# Test support files +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg + +# libtool libraries to build +lib_LTLIBRARIES = libjpeg.la + +# Library sources for libjpeg.la +libjpeg_la_SOURCES = $(LIBSOURCES) + +# LDFLAGS for libjpeg.la +libjpeg_la_LDFLAGS = -no-undefined \ + -version-info $(JPEG_LIB_VERSION) + +if HAVE_LD_VERSION_SCRIPT + libjpeg_la_LDFLAGS += -Wl,--version-script=$(srcdir)/libjpeg.map +endif + +# Executables to build +bin_PROGRAMS = cjpeg djpeg jpegtran rdjpgcom wrjpgcom + +# Executable sources & libs +cjpeg_SOURCES = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \ + rdswitch.c cdjpeg.c +cjpeg_LDADD = libjpeg.la +djpeg_SOURCES = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \ + rdcolmap.c cdjpeg.c +djpeg_LDADD = libjpeg.la +jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c +jpegtran_LDADD = libjpeg.la +rdjpgcom_SOURCES = rdjpgcom.c +wrjpgcom_SOURCES = wrjpgcom.c + +# Manual pages to install +man_MANS = $(DISTMANS) + +# Headers to install +include_HEADERS = $(INSTINCLUDES) + +# Other distributed headers +noinst_HEADERS = $(OTHERINCLUDES) + +# Other distributed files +EXTRA_DIST = $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \ + $(OTHERFILES) $(TESTFILES) + +# Files to be cleaned +CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \ + testoutt.jpg + +# Install jconfig.h +install-data-local: + $(mkinstalldirs) $(DESTDIR)$(includedir) + $(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h + +# Uninstall jconfig.h +uninstall-local: + rm -f $(DESTDIR)$(includedir)/jconfig.h + +# Run tests +test: check-local +check-local: + rm -f testout* + ./djpeg -dct int -ppm -outfile testout.ppm $(srcdir)/testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp $(srcdir)/testorig.jpg + ./cjpeg -dct int -outfile testout.jpg $(srcdir)/testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm + ./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg + cmp $(srcdir)/testimg.ppm testout.ppm + cmp $(srcdir)/testimg.bmp testout.bmp + cmp $(srcdir)/testimg.jpg testout.jpg + cmp $(srcdir)/testimg.ppm testoutp.ppm + cmp $(srcdir)/testimgp.jpg testoutp.jpg + cmp $(srcdir)/testorig.jpg testoutt.jpg diff --git a/src/SDL2/external/jpeg-9/Makefile.in b/src/SDL2/external/jpeg-9/Makefile.in new file mode 100644 index 000000000..d9a3664d7 --- /dev/null +++ b/src/SDL2/external/jpeg-9/Makefile.in @@ -0,0 +1,995 @@ +# Makefile.in generated by automake 1.13.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# Automake Makefile for the JPEG library +# +# This file is written by Bob Friesenhahn, Guido Vollbeding +# + + + +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +@HAVE_LD_VERSION_SCRIPT_TRUE@am__append_1 = -Wl,--version-script=$(srcdir)/libjpeg.map +bin_PROGRAMS = cjpeg$(EXEEXT) djpeg$(EXEEXT) jpegtran$(EXEEXT) \ + rdjpgcom$(EXEEXT) wrjpgcom$(EXEEXT) +subdir = . +DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(top_srcdir)/configure $(am__configure_deps) \ + $(srcdir)/jconfig.cfg depcomp $(include_HEADERS) \ + $(noinst_HEADERS) +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = jconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ + "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +libjpeg_la_LIBADD = +am__objects_1 = jaricom.lo jcapimin.lo jcapistd.lo jcarith.lo \ + jccoefct.lo jccolor.lo jcdctmgr.lo jchuff.lo jcinit.lo \ + jcmainct.lo jcmarker.lo jcmaster.lo jcomapi.lo jcparam.lo \ + jcprepct.lo jcsample.lo jctrans.lo jdapimin.lo jdapistd.lo \ + jdarith.lo jdatadst.lo jdatasrc.lo jdcoefct.lo jdcolor.lo \ + jddctmgr.lo jdhuff.lo jdinput.lo jdmainct.lo jdmarker.lo \ + jdmaster.lo jdmerge.lo jdpostct.lo jdsample.lo jdtrans.lo \ + jerror.lo jfdctflt.lo jfdctfst.lo jfdctint.lo jidctflt.lo \ + jidctfst.lo jidctint.lo jquant1.lo jquant2.lo jutils.lo \ + jmemmgr.lo @MEMORYMGR@.lo +am_libjpeg_la_OBJECTS = $(am__objects_1) +libjpeg_la_OBJECTS = $(am_libjpeg_la_OBJECTS) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +libjpeg_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(libjpeg_la_LDFLAGS) $(LDFLAGS) -o $@ +PROGRAMS = $(bin_PROGRAMS) +am_cjpeg_OBJECTS = cjpeg.$(OBJEXT) rdppm.$(OBJEXT) rdgif.$(OBJEXT) \ + rdtarga.$(OBJEXT) rdrle.$(OBJEXT) rdbmp.$(OBJEXT) \ + rdswitch.$(OBJEXT) cdjpeg.$(OBJEXT) +cjpeg_OBJECTS = $(am_cjpeg_OBJECTS) +cjpeg_DEPENDENCIES = libjpeg.la +am_djpeg_OBJECTS = djpeg.$(OBJEXT) wrppm.$(OBJEXT) wrgif.$(OBJEXT) \ + wrtarga.$(OBJEXT) wrrle.$(OBJEXT) wrbmp.$(OBJEXT) \ + rdcolmap.$(OBJEXT) cdjpeg.$(OBJEXT) +djpeg_OBJECTS = $(am_djpeg_OBJECTS) +djpeg_DEPENDENCIES = libjpeg.la +am_jpegtran_OBJECTS = jpegtran.$(OBJEXT) rdswitch.$(OBJEXT) \ + cdjpeg.$(OBJEXT) transupp.$(OBJEXT) +jpegtran_OBJECTS = $(am_jpegtran_OBJECTS) +jpegtran_DEPENDENCIES = libjpeg.la +am_rdjpgcom_OBJECTS = rdjpgcom.$(OBJEXT) +rdjpgcom_OBJECTS = $(am_rdjpgcom_OBJECTS) +rdjpgcom_LDADD = $(LDADD) +am_wrjpgcom_OBJECTS = wrjpgcom.$(OBJEXT) +wrjpgcom_OBJECTS = $(am_wrjpgcom_OBJECTS) +wrjpgcom_LDADD = $(LDADD) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(libjpeg_la_SOURCES) $(cjpeg_SOURCES) $(djpeg_SOURCES) \ + $(jpegtran_SOURCES) $(rdjpgcom_SOURCES) $(wrjpgcom_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(man_MANS) +HEADERS = $(include_HEADERS) $(noinst_HEADERS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)jconfig.cfg +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +AM_RECURSIVE_TARGETS = cscope +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LIB_VERSION = @JPEG_LIB_VERSION@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MEMORYMGR = @MEMORYMGR@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ + +# Sources to build library +LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c + + +# System dependent sources +SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c + +# Headers which are installed to support the library +INSTINCLUDES = jerror.h jmorecfg.h jpeglib.h + +# Headers which are not installed +OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \ + jversion.h transupp.h + + +# Manual pages (Automake uses 'MANS' for itself) +DISTMANS = cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1 + +# Other documentation files +DOCS = README install.txt usage.txt wizard.txt example.c libjpeg.txt \ + structure.txt coderules.txt filelist.txt change.log + + +# Makefiles for various systems +MKFILES = configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ + makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ + makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ + makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ + makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ + makefile.mms makefile.vms makvms.opt + + +# Configuration files +CONFIGFILES = jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms + + +# Support scripts for configure +CONFIGUREFILES = config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib + + +# Miscellaneous support files +OTHERFILES = jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map + +# Test support files +TESTFILES = testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg + + +# libtool libraries to build +lib_LTLIBRARIES = libjpeg.la + +# Library sources for libjpeg.la +libjpeg_la_SOURCES = $(LIBSOURCES) + +# LDFLAGS for libjpeg.la +libjpeg_la_LDFLAGS = -no-undefined -version-info $(JPEG_LIB_VERSION) \ + $(am__append_1) + +# Executable sources & libs +cjpeg_SOURCES = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \ + rdswitch.c cdjpeg.c + +cjpeg_LDADD = libjpeg.la +djpeg_SOURCES = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \ + rdcolmap.c cdjpeg.c + +djpeg_LDADD = libjpeg.la +jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c +jpegtran_LDADD = libjpeg.la +rdjpgcom_SOURCES = rdjpgcom.c +wrjpgcom_SOURCES = wrjpgcom.c + +# Manual pages to install +man_MANS = $(DISTMANS) + +# Headers to install +include_HEADERS = $(INSTINCLUDES) + +# Other distributed headers +noinst_HEADERS = $(OTHERINCLUDES) + +# Other distributed files +EXTRA_DIST = $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \ + $(OTHERFILES) $(TESTFILES) + + +# Files to be cleaned +CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \ + testoutt.jpg + +all: jconfig.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +jconfig.h: stamp-h1 + @if test ! -f $@; then rm -f stamp-h1; else :; fi + @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi + +stamp-h1: $(srcdir)/jconfig.cfg $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status jconfig.h +$(srcdir)/jconfig.cfg: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f jconfig.h stamp-h1 + +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } +libjpeg.la: $(libjpeg_la_OBJECTS) $(libjpeg_la_DEPENDENCIES) $(EXTRA_libjpeg_la_DEPENDENCIES) + $(AM_V_CCLD)$(libjpeg_la_LINK) -rpath $(libdir) $(libjpeg_la_OBJECTS) $(libjpeg_la_LIBADD) $(LIBS) +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + || test -f $$p1 \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +cjpeg$(EXEEXT): $(cjpeg_OBJECTS) $(cjpeg_DEPENDENCIES) $(EXTRA_cjpeg_DEPENDENCIES) + @rm -f cjpeg$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(cjpeg_OBJECTS) $(cjpeg_LDADD) $(LIBS) +djpeg$(EXEEXT): $(djpeg_OBJECTS) $(djpeg_DEPENDENCIES) $(EXTRA_djpeg_DEPENDENCIES) + @rm -f djpeg$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(djpeg_OBJECTS) $(djpeg_LDADD) $(LIBS) +jpegtran$(EXEEXT): $(jpegtran_OBJECTS) $(jpegtran_DEPENDENCIES) $(EXTRA_jpegtran_DEPENDENCIES) + @rm -f jpegtran$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(jpegtran_OBJECTS) $(jpegtran_LDADD) $(LIBS) +rdjpgcom$(EXEEXT): $(rdjpgcom_OBJECTS) $(rdjpgcom_DEPENDENCIES) $(EXTRA_rdjpgcom_DEPENDENCIES) + @rm -f rdjpgcom$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(rdjpgcom_OBJECTS) $(rdjpgcom_LDADD) $(LIBS) +wrjpgcom$(EXEEXT): $(wrjpgcom_OBJECTS) $(wrjpgcom_DEPENDENCIES) $(EXTRA_wrjpgcom_DEPENDENCIES) + @rm -f wrjpgcom$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(wrjpgcom_OBJECTS) $(wrjpgcom_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/@MEMORYMGR@.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cdjpeg.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cjpeg.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/djpeg.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jaricom.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapimin.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapistd.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcarith.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccoefct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccolor.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcdctmgr.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jchuff.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcinit.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmainct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmarker.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmaster.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcomapi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcparam.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcprepct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcsample.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jctrans.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapimin.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapistd.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdarith.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatadst.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatasrc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcoefct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcolor.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jddctmgr.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdhuff.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdinput.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmainct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmarker.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmaster.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmerge.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdpostct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdsample.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdtrans.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jerror.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctflt.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctfst.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctint.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctflt.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctfst.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctint.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jmemmgr.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jpegtran.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant1.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant2.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jutils.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdbmp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdcolmap.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdgif.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdjpgcom.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdppm.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdrle.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdswitch.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdtarga.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transupp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrbmp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrgif.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrjpgcom.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrppm.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrrle.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrtarga.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt +install-man1: $(man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(man_MANS)'; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) +install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ + done + +uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-local +check: check-am +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS) \ + jconfig.h +install-binPROGRAMS: install-libLTLIBRARIES + +installdirs: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \ + clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-data-local install-includeHEADERS install-man + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man1 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES uninstall-local uninstall-man + +uninstall-man: uninstall-man1 + +.MAKE: all check-am install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am \ + check-local clean clean-binPROGRAMS clean-cscope clean-generic \ + clean-libLTLIBRARIES clean-libtool cscope cscopelist-am ctags \ + ctags-am distclean distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags dvi dvi-am html \ + html-am info info-am install install-am install-binPROGRAMS \ + install-data install-data-am install-data-local install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-includeHEADERS install-info \ + install-info-am install-libLTLIBRARIES install-man \ + install-man1 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-binPROGRAMS uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES uninstall-local uninstall-man \ + uninstall-man1 + + +# Install jconfig.h +install-data-local: + $(mkinstalldirs) $(DESTDIR)$(includedir) + $(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h + +# Uninstall jconfig.h +uninstall-local: + rm -f $(DESTDIR)$(includedir)/jconfig.h + +# Run tests +test: check-local +check-local: + rm -f testout* + ./djpeg -dct int -ppm -outfile testout.ppm $(srcdir)/testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp $(srcdir)/testorig.jpg + ./cjpeg -dct int -outfile testout.jpg $(srcdir)/testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm + ./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg + cmp $(srcdir)/testimg.ppm testout.ppm + cmp $(srcdir)/testimg.bmp testout.bmp + cmp $(srcdir)/testimg.jpg testout.jpg + cmp $(srcdir)/testimg.ppm testoutp.ppm + cmp $(srcdir)/testimgp.jpg testoutp.jpg + cmp $(srcdir)/testorig.jpg testoutt.jpg + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/SDL2/external/jpeg-9/README b/src/SDL2/external/jpeg-9/README new file mode 100644 index 000000000..fc5ca5d45 --- /dev/null +++ b/src/SDL2/external/jpeg-9/README @@ -0,0 +1,350 @@ +The Independent JPEG Group's JPEG software +========================================== + +README for release 9 of 13-Jan-2013 +=================================== + +This distribution contains the ninth public release of the Independent JPEG +Group's free JPEG software. You are welcome to redistribute this software and +to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. + +This software is the work of Tom Lane, Guido Vollbeding, Philip Gladstone, +Bill Allombert, Jim Boucher, Lee Crocker, Bob Friesenhahn, Ben Jackson, +Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Ge' Weijers, +and other members of the Independent JPEG Group. + +IJG is not affiliated with the ISO/IEC JTC1/SC29/WG1 standards committee +(also known as JPEG, together with ITU-T SG16). + + +DOCUMENTATION ROADMAP +===================== + +This file contains the following sections: + +OVERVIEW General description of JPEG and the IJG software. +LEGAL ISSUES Copyright, lack of warranty, terms of distribution. +REFERENCES Where to learn more about JPEG. +ARCHIVE LOCATIONS Where to find newer versions of this software. +ACKNOWLEDGMENTS Special thanks. +FILE FORMAT WARS Software *not* to get. +TO DO Plans for future IJG releases. + +Other documentation files in the distribution are: + +User documentation: + install.txt How to configure and install the IJG software. + usage.txt Usage instructions for cjpeg, djpeg, jpegtran, + rdjpgcom, and wrjpgcom. + *.1 Unix-style man pages for programs (same info as usage.txt). + wizard.txt Advanced usage instructions for JPEG wizards only. + change.log Version-to-version change highlights. +Programmer and internal documentation: + libjpeg.txt How to use the JPEG library in your own programs. + example.c Sample code for calling the JPEG library. + structure.txt Overview of the JPEG library's internal structure. + filelist.txt Road map of IJG files. + coderules.txt Coding style rules --- please read if you contribute code. + +Please read at least the files install.txt and usage.txt. Some information +can also be found in the JPEG FAQ (Frequently Asked Questions) article. See +ARCHIVE LOCATIONS below to find out where to obtain the FAQ article. + +If you want to understand how the JPEG code works, we suggest reading one or +more of the REFERENCES, then looking at the documentation files (in roughly +the order listed) before diving into the code. + + +OVERVIEW +======== + +This package contains C software to implement JPEG image encoding, decoding, +and transcoding. JPEG (pronounced "jay-peg") is a standardized compression +method for full-color and gray-scale images. + +This software implements JPEG baseline, extended-sequential, and progressive +compression processes. Provision is made for supporting all variants of these +processes, although some uncommon parameter settings aren't implemented yet. +We have made no provision for supporting the hierarchical or lossless +processes defined in the standard. + +We provide a set of library routines for reading and writing JPEG image files, +plus two sample applications "cjpeg" and "djpeg", which use the library to +perform conversion between JPEG and some other popular image file formats. +The library is intended to be reused in other applications. + +In order to support file conversion and viewing software, we have included +considerable functionality beyond the bare JPEG coding/decoding capability; +for example, the color quantization modules are not strictly part of JPEG +decoding, but they are essential for output to colormapped file formats or +colormapped displays. These extra functions can be compiled out of the +library if not required for a particular application. + +We have also included "jpegtran", a utility for lossless transcoding between +different JPEG processes, and "rdjpgcom" and "wrjpgcom", two simple +applications for inserting and extracting textual comments in JFIF files. + +The emphasis in designing this software has been on achieving portability and +flexibility, while also making it fast enough to be useful. In particular, +the software is not intended to be read as a tutorial on JPEG. (See the +REFERENCES section for introductory material.) Rather, it is intended to +be reliable, portable, industrial-strength code. We do not claim to have +achieved that goal in every aspect of the software, but we strive for it. + +We welcome the use of this software as a component of commercial products. +No royalty is required, but we do ask for an acknowledgement in product +documentation, as described under LEGAL ISSUES. + + +LEGAL ISSUES +============ + +In plain English: + +1. We don't promise that this software works. (But if you find any bugs, + please let us know!) +2. You can use this software for whatever you want. You don't have to pay us. +3. You may not pretend that you wrote this software. If you use it in a + program, you must acknowledge somewhere in your documentation that + you've used the IJG code. + +In legalese: + +The authors make NO WARRANTY or representation, either express or implied, +with respect to this software, its quality, accuracy, merchantability, or +fitness for a particular purpose. This software is provided "AS IS", and you, +its user, assume the entire risk as to its quality and accuracy. + +This software is copyright (C) 1991-2013, Thomas G. Lane, Guido Vollbeding. +All Rights Reserved except as specified below. + +Permission is hereby granted to use, copy, modify, and distribute this +software (or portions thereof) for any purpose, without fee, subject to these +conditions: +(1) If any part of the source code for this software is distributed, then this +README file must be included, with this copyright and no-warranty notice +unaltered; and any additions, deletions, or changes to the original files +must be clearly indicated in accompanying documentation. +(2) If only executable code is distributed, then the accompanying +documentation must state that "this software is based in part on the work of +the Independent JPEG Group". +(3) Permission for use of this software is granted only if the user accepts +full responsibility for any undesirable consequences; the authors accept +NO LIABILITY for damages of any kind. + +These conditions apply to any software derived from or based on the IJG code, +not just to the unmodified library. If you use our work, you ought to +acknowledge us. + +Permission is NOT granted for the use of any IJG author's name or company name +in advertising or publicity relating to this software or products derived from +it. This software may be referred to only as "the Independent JPEG Group's +software". + +We specifically permit and encourage the use of this software as the basis of +commercial products, provided that all warranty or liability claims are +assumed by the product vendor. + + +The Unix configuration script "configure" was produced with GNU Autoconf. +It is copyright by the Free Software Foundation but is freely distributable. +The same holds for its supporting scripts (config.guess, config.sub, +ltmain.sh). Another support script, install-sh, is copyright by X Consortium +but is also freely distributable. + +The IJG distribution formerly included code to read and write GIF files. +To avoid entanglement with the Unisys LZW patent, GIF reading support has +been removed altogether, and the GIF writer has been simplified to produce +"uncompressed GIFs". This technique does not use the LZW algorithm; the +resulting GIF files are larger than usual, but are readable by all standard +GIF decoders. + +We are required to state that + "The Graphics Interchange Format(c) is the Copyright property of + CompuServe Incorporated. GIF(sm) is a Service Mark property of + CompuServe Incorporated." + + +REFERENCES +========== + +We recommend reading one or more of these references before trying to +understand the innards of the JPEG software. + +The best short technical introduction to the JPEG compression algorithm is + Wallace, Gregory K. "The JPEG Still Picture Compression Standard", + Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44. +(Adjacent articles in that issue discuss MPEG motion picture compression, +applications of JPEG, and related topics.) If you don't have the CACM issue +handy, a PostScript file containing a revised version of Wallace's article is +available at http://www.ijg.org/files/wallace.ps.gz. The file (actually +a preprint for an article that appeared in IEEE Trans. Consumer Electronics) +omits the sample images that appeared in CACM, but it includes corrections +and some added material. Note: the Wallace article is copyright ACM and IEEE, +and it may not be used for commercial purposes. + +A somewhat less technical, more leisurely introduction to JPEG can be found in +"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by +M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides +good explanations and example C code for a multitude of compression methods +including JPEG. It is an excellent source if you are comfortable reading C +code but don't know much about data compression in general. The book's JPEG +sample code is far from industrial-strength, but when you are ready to look +at a full implementation, you've got one here... + +The best currently available description of JPEG is the textbook "JPEG Still +Image Data Compression Standard" by William B. Pennebaker and Joan L. +Mitchell, published by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. +Price US$59.95, 638 pp. The book includes the complete text of the ISO JPEG +standards (DIS 10918-1 and draft DIS 10918-2). +Although this is by far the most detailed and comprehensive exposition of +JPEG publicly available, we point out that it is still missing an explanation +of the most essential properties and algorithms of the underlying DCT +technology. +If you think that you know about DCT-based JPEG after reading this book, +then you are in delusion. The real fundamentals and corresponding potential +of DCT-based JPEG are not publicly known so far, and that is the reason for +all the mistaken developments taking place in the image coding domain. + +The original JPEG standard is divided into two parts, Part 1 being the actual +specification, while Part 2 covers compliance testing methods. Part 1 is +titled "Digital Compression and Coding of Continuous-tone Still Images, +Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS +10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of +Continuous-tone Still Images, Part 2: Compliance testing" and has document +numbers ISO/IEC IS 10918-2, ITU-T T.83. +IJG JPEG 8 introduced an implementation of the JPEG SmartScale extension +which is specified in two documents: A contributed document at ITU and ISO +with title "ITU-T JPEG-Plus Proposal for Extending ITU-T T.81 for Advanced +Image Coding", April 2006, Geneva, Switzerland. The latest version of this +document is Revision 3. And a contributed document ISO/IEC JTC1/SC29/WG1 N +5799 with title "Evolution of JPEG", June/July 2011, Berlin, Germany. +IJG JPEG 9 introduces a reversible color transform for improved lossless +compression which is described in a contributed document ISO/IEC JTC1/SC29/ +WG1 N 6080 with title "JPEG 9 Lossless Coding", June/July 2012, Paris, +France. + +The JPEG standard does not specify all details of an interchangeable file +format. For the omitted details we follow the "JFIF" conventions, revision +1.02. JFIF 1.02 has been adopted as an Ecma International Technical Report +and thus received a formal publication status. It is available as a free +download in PDF format from +http://www.ecma-international.org/publications/techreports/E-TR-098.htm. +A PostScript version of the JFIF document is available at +http://www.ijg.org/files/jfif.ps.gz. There is also a plain text version at +http://www.ijg.org/files/jfif.txt.gz, but it is missing the figures. + +The TIFF 6.0 file format specification can be obtained by FTP from +ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme +found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems. +IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). +Instead, we recommend the JPEG design proposed by TIFF Technical Note #2 +(Compression tag 7). Copies of this Note can be obtained from +http://www.ijg.org/files/. It is expected that the next revision +of the TIFF spec will replace the 6.0 JPEG design with the Note's design. +Although IJG's own code does not support TIFF/JPEG, the free libtiff library +uses our library to implement TIFF/JPEG per the Note. + + +ARCHIVE LOCATIONS +================= + +The "official" archive site for this software is www.ijg.org. +The most recent released version can always be found there in +directory "files". This particular version will be archived as +http://www.ijg.org/files/jpegsrc.v9.tar.gz, and in Windows-compatible +"zip" archive format as http://www.ijg.org/files/jpegsr9.zip. + +The JPEG FAQ (Frequently Asked Questions) article is a source of some +general information about JPEG. +It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/ +and other news.answers archive sites, including the official news.answers +archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/. +If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu +with body + send usenet/news.answers/jpeg-faq/part1 + send usenet/news.answers/jpeg-faq/part2 + + +ACKNOWLEDGMENTS +=============== + +Thank to Juergen Bruder for providing me with a copy of the common DCT +algorithm article, only to find out that I had come to the same result +in a more direct and comprehensible way with a more generative approach. + +Thank to Istvan Sebestyen and Joan L. Mitchell for inviting me to the +ITU JPEG (Study Group 16) meeting in Geneva, Switzerland. + +Thank to Thomas Wiegand and Gary Sullivan for inviting me to the +Joint Video Team (MPEG & ITU) meeting in Geneva, Switzerland. + +Thank to Thomas Richter and Daniel Lee for inviting me to the +ISO/IEC JTC1/SC29/WG1 (also known as JPEG, together with ITU-T SG16) +meeting in Berlin, Germany. + +Thank to John Korejwa and Massimo Ballerini for inviting me to +fruitful consultations in Boston, MA and Milan, Italy. + +Thank to Hendrik Elstner, Roland Fassauer, Simone Zuck, Guenther +Maier-Gerber, Walter Stoeber, Fred Schmitz, and Norbert Braunagel +for corresponding business development. + +Thank to Nico Zschach and Dirk Stelling of the technical support team +at the Digital Images company in Halle for providing me with extra +equipment for configuration tests. + +Thank to Richard F. Lyon (then of Foveon Inc.) for fruitful +communication about JPEG configuration in Sigma Photo Pro software. + +Thank to Andrew Finkenstadt for hosting the ijg.org site. + +Last but not least special thank to Thomas G. Lane for the original +design and development of this singular software package. + + +FILE FORMAT WARS +================ + +The ISO/IEC JTC1/SC29/WG1 standards committee (also known as JPEG, together +with ITU-T SG16) currently promotes different formats containing the name +"JPEG" which is misleading because these formats are incompatible with +original DCT-based JPEG and are based on faulty technologies. +IJG therefore does not and will not support such momentary mistakes +(see REFERENCES). +There exist also distributions under the name "OpenJPEG" promoting such +kind of formats which is misleading because they don't support original +JPEG images. +We have no sympathy for the promotion of inferior formats. Indeed, one of +the original reasons for developing this free software was to help force +convergence on common, interoperable format standards for JPEG files. +Don't use an incompatible file format! +(In any case, our decoder will remain capable of reading existing JPEG +image files indefinitely.) + +Furthermore, the ISO committee pretends to be "responsible for the popular +JPEG" in their public reports which is not true because they don't respond to +actual requirements for the maintenance of the original JPEG specification. + +There are currently different distributions in circulation containing the +name "libjpeg" which is misleading because they don't have the features and +are incompatible with formats supported by actual IJG libjpeg distributions. +One of those fakes is released by members of the ISO committee and just uses +the name of libjpeg for misdirection of people, similar to the abuse of the +name JPEG as described above, while having nothing in common with actual IJG +libjpeg distributions. +The other one claims to be a "derivative" or "fork" of the original libjpeg +and violates the license conditions as described under LEGAL ISSUES above. +We have no sympathy for the release of misleading and illegal distributions +derived from obsolete code bases. +Don't use an obsolete code base! + + +TO DO +===== + +Version 9 is the second release of a new generation JPEG standard +to overcome the limitations of the original JPEG specification. +More features are being prepared for coming releases... + +Please send bug reports, offers of help, etc. to jpeg-info@jpegclub.org. diff --git a/src/SDL2/external/jpeg-9/aclocal.m4 b/src/SDL2/external/jpeg-9/aclocal.m4 new file mode 100644 index 000000000..9f63e17a3 --- /dev/null +++ b/src/SDL2/external/jpeg-9/aclocal.m4 @@ -0,0 +1,9683 @@ +# generated automatically by aclocal 1.13.1 -*- Autoconf -*- + +# Copyright (C) 1996-2012 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +]) + +# serial 57 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +_LT_SETUP + +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +m4_defun([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl + +_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl +dnl +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_WITH_SYSROOT])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR + +m4_require([_LT_TAG_COMPILER])dnl + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + _LT_PATH_MAGIC + fi + ;; +esac + +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + + +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from `configure', and `config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# `config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain="$ac_aux_dir/ltmain.sh" +])# _LT_PROG_LTMAIN + + + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the `libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to `config.status' so that its +# declaration there will have the same value as in `configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags="_LT_TAGS"dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# `#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test $lt_write_fail = 0 && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to ." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2011 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test $[#] != 0 +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try \`$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try \`$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +_LT_COPYING +_LT_LIBTOOL_TAGS + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + _LT_PROG_REPLACE_SHELLFNS + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Go], [_LT_LANG(GO)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +m4_ifndef([AC_PROG_GO], [ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_GO. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +m4_defun([AC_PROG_GO], +[AC_LANG_PUSH(Go)dnl +AC_ARG_VAR([GOC], [Go compiler command])dnl +AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl +_AC_ARG_VAR_LDFLAGS()dnl +AC_CHECK_TOOL(GOC, gccgo) +if test -z "$GOC"; then + if test -n "$ac_tool_prefix"; then + AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) + fi +fi +if test -z "$GOC"; then + AC_CHECK_PROG(GOC, gccgo, gccgo, false) +fi +])#m4_defun +])#m4_ifndef + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([AC_PROG_GO], + [LT_LANG(GO)], + [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS="$save_LDFLAGS" + ]) + + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[[012]]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES([TAG]) +# --------------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], + [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + m4_if([$1], [CXX], +[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) +# ---------------------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +# Store the results from the different compilers for each TAGNAME. +# Allow to override them for all tags through lt_cv_aix_libpath. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], + [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ + lt_aix_libpath_sed='[ + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }]' + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" + fi + ]) + aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) +fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script which will find a shell with a builtin +# printf (which we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +case "$ECHO" in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac + +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_WITH_SYSROOT +# ---------------- +AC_DEFUN([_LT_WITH_SYSROOT], +[AC_MSG_CHECKING([for sysroot]) +AC_ARG_WITH([sysroot], +[ --with-sysroot[=DIR] Search for dependent libraries within DIR + (or the compiler's sysroot if not specified).], +[], [with_sysroot=no]) + +dnl lt_sysroot will always be passed unquoted. We quote it here +dnl in case the user passed a directory name. +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + AC_MSG_RESULT([${with_sysroot}]) + AC_MSG_ERROR([The sysroot must be an absolute path.]) + ;; +esac + + AC_MSG_RESULT([${lt_sysroot:-no}]) +_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl +[dependent libraries, and in which our libraries should be installed.])]) + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" +])# _LT_ENABLE_LOCK + + +# _LT_PROG_AR +# ----------- +m4_defun([_LT_PROG_AR], +[AC_CHECK_TOOLS(AR, [ar], false) +: ${AR=ar} +: ${AR_FLAGS=cru} +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], + [lt_cv_ar_at_file=no + AC_COMPILE_IFELSE([AC_LANG_PROGRAM], + [echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + ]) + ]) + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi +_LT_DECL([], [archiver_list_spec], [1], + [How to feed a file listing to the archiver]) +])# _LT_PROG_AR + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[_LT_PROG_AR + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test x"[$]$2" = xyes; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links="nottested" +if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || + test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[[4-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[23]].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], + [Run-time system search path for libraries]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program which can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program which can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method = "file_magic"]) +_LT_DECL([], [file_magic_glob], [1], + [How to find potential files when deplibs_check_method = "file_magic"]) +_LT_DECL([], [want_nocaseglob], [1], + [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi]) +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + +# _LT_CHECK_SHAREDLIB_FROM_LINKLIB +# -------------------------------- +# how to determine the name of the shared library +# associated with a specific link library. +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +m4_require([_LT_DECL_DLLTOOL]) +AC_CACHE_CHECK([how to associate runtime and link libraries], +lt_cv_sharedlib_from_linklib_cmd, +[lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac +]) +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + +_LT_DECL([], [sharedlib_from_linklib_cmd], [1], + [Command to associate shared and link libraries]) +])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB + + +# _LT_PATH_MANIFEST_TOOL +# ---------------------- +# locate the manifest tool +m4_defun([_LT_PATH_MANIFEST_TOOL], +[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&AS_MESSAGE_LOG_FD + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest*]) +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi +_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl +])# _LT_PATH_MANIFEST_TOOL + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT@&t@_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT@&t@_DLSYM_CONST +#else +# define LT@&t@_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT@&t@_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([], [nm_file_list_spec], [1], + [Specify filename containing input files for $NM]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ F* | *Sun*Fortran*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + *Intel*\ [[CF]]*Compiler*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + *Portland\ Group*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac + +AC_CACHE_CHECK([for $compiler option to produce PIC], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + ;; + esac + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + esac + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], + [lt_cv_irix_exported_symbol], + [save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE( + [AC_LANG_SOURCE( + [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], + [C++], [[int foo (void) { return 0; }]], + [Fortran 77], [[ + subroutine foo + end]], + [Fortran], [[ + subroutine foo + end]])])], + [lt_cv_irix_exported_symbol=yes], + [lt_cv_irix_exported_symbol=no]) + LDFLAGS="$save_LDFLAGS"]) + if test "$lt_cv_irix_exported_symbol" = yes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting ${shlibpath_var} if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [postlink_cmds], [2], + [Commands necessary for finishing linking programs]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC="$lt_save_CC" +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + gnu*) + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + + _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_FUNC_STRIPNAME_CNF +# ---------------------- +# func_stripname_cnf prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# +# This function is identical to the (non-XSI) version of func_stripname, +# except this one can be used by m4 code that may be executed by configure, +# rather than the libtool script. +m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl +AC_REQUIRE([_LT_DECL_SED]) +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) +func_stripname_cnf () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname_cnf +])# _LT_FUNC_STRIPNAME_CNF + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF +package foo +func foo() { +} +_LT_EOF +]) + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac + +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)="$p" + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)="$p" + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_F77" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} + CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$G77" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" + CFLAGS="$lt_save_CFLAGS" +fi # test "$_lt_disable_F77" != yes + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test "$_lt_disable_FC" != yes + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +CFLAGS=$GCJFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_GO_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Go compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GO_CONFIG], +[AC_REQUIRE([LT_PROG_GO])dnl +AC_LANG_SAVE + +# Source file extension for Go test sources. +ac_ext=go + +# Object file extension for compiled Go test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="package main; func main() { }" + +# Code to be used in simple link tests +lt_simple_link_test_code='package main; func main() { }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GOC-"gccgo"} +CFLAGS=$GOFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# Go did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GO_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_GO +# ---------- +AC_DEFUN([LT_PROG_GO], +[AC_CHECK_TOOL(GOC, gccgo,) +]) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + +# _LT_DECL_DLLTOOL +# ---------------- +# Ensure DLLTOOL variable is set. +m4_defun([_LT_DECL_DLLTOOL], +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) +AC_SUBST([DLLTOOL]) +]) + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +AC_MSG_RESULT([$xsi_shell]) +_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +AC_MSG_CHECKING([whether the shell understands "+="]) +lt_shell_append=no +( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +AC_MSG_RESULT([$lt_shell_append]) +_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) +# ------------------------------------------------------ +# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and +# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. +m4_defun([_LT_PROG_FUNCTION_REPLACE], +[dnl { +sed -e '/^$1 ()$/,/^} # $1 /c\ +$1 ()\ +{\ +m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) +} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: +]) + + +# _LT_PROG_REPLACE_SHELLFNS +# ------------------------- +# Replace existing portable implementations of several shell functions with +# equivalent extended shell implementations where those features are available.. +m4_defun([_LT_PROG_REPLACE_SHELLFNS], +[if test x"$xsi_shell" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl + func_split_long_opt_name=${1%%=*} + func_split_long_opt_arg=${1#*=}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) + + _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) + + _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) + + _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) +fi + +if test x"$lt_shell_append" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) + + _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl + func_quote_for_eval "${2}" +dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ + eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) +fi +]) + +# _LT_PATH_CONVERSION_FUNCTIONS +# ----------------------------- +# Determine which file name conversion functions should be used by +# func_to_host_file (and, implicitly, by func_to_host_path). These are needed +# for certain cross-compile configurations and native mingw. +m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_MSG_CHECKING([how to convert $build file names to $host format]) +AC_CACHE_VAL(lt_cv_to_host_file_cmd, +[case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +]) +to_host_file_cmd=$lt_cv_to_host_file_cmd +AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) +_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], + [0], [convert $build file names to $host format])dnl + +AC_MSG_CHECKING([how to convert $build file names to toolchain format]) +AC_CACHE_VAL(lt_cv_to_tool_file_cmd, +[#assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac +]) +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) +_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], + [0], [convert $build files to toolchain format])dnl +])# _LT_PATH_CONVERSION_FUNCTIONS + +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 7 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option `$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + ]) +])# _LT_SET_OPTIONS + + + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [pic_mode=default]) + +test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) + +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) + +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# @configure_input@ + +# serial 3337 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.4.2]) +m4_define([LT_PACKAGE_REVISION], [1.3337]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.4.2' +macro_revision='1.3337' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) + +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) + +# Copyright (C) 2002-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.13' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.13.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.13.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# Copyright (C) 2011-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_AR([ACT-IF-FAIL]) +# ------------------------- +# Try to determine the archiver interface, and trigger the ar-lib wrapper +# if it is needed. If the detection of archiver interface fails, run +# ACT-IF-FAIL (default is to abort configure with a proper error message). +AC_DEFUN([AM_PROG_AR], +[AC_BEFORE([$0], [LT_INIT])dnl +AC_BEFORE([$0], [AC_PROG_LIBTOOL])dnl +AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([ar-lib])dnl +AC_CHECK_TOOLS([AR], [ar lib "link -lib"], [false]) +: ${AR=ar} + +AC_CACHE_CHECK([the archiver ($AR) interface], [am_cv_ar_interface], + [am_cv_ar_interface=ar + AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int some_variable = 0;]])], + [am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([am_ar_try]) + if test "$ac_status" -eq 0; then + am_cv_ar_interface=ar + else + am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([am_ar_try]) + if test "$ac_status" -eq 0; then + am_cv_ar_interface=lib + else + am_cv_ar_interface=unknown + fi + fi + rm -f conftest.lib libconftest.a + ]) + ]) + +case $am_cv_ar_interface in +ar) + ;; +lib) + # Microsoft lib, so override with the ar-lib wrapper script. + # FIXME: It is wrong to rewrite AR. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__AR in this case, + # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something + # similar. + AR="$am_aux_dir/ar-lib $AR" + ;; +unknown) + m4_default([$1], + [AC_MSG_ERROR([could not determine $AR interface])]) + ;; +esac +AC_SUBST([AR])dnl +]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each '.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) + +# Copyright (C) 2003-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless 'enable' is passed literally. +# For symmetry, 'disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. +AC_DEFUN([AM_MAINTAINER_MODE], +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], + [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], + am_maintainer_other[ make rules and dependencies not useful + (and sometimes confusing) to the casual installer])], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST([MAINT])dnl +] +) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of '-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + diff --git a/src/SDL2/external/jpeg-9/ar-lib b/src/SDL2/external/jpeg-9/ar-lib new file mode 100755 index 000000000..fe2301e71 --- /dev/null +++ b/src/SDL2/external/jpeg-9/ar-lib @@ -0,0 +1,270 @@ +#! /bin/sh +# Wrapper for Microsoft lib.exe + +me=ar-lib +scriptversion=2012-03-01.08; # UTC + +# Copyright (C) 2010-2013 Free Software Foundation, Inc. +# Written by Peter Rosin . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + + +# func_error message +func_error () +{ + echo "$me: $1" 1>&2 + exit 1 +} + +file_conv= + +# func_file_conv build_file +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv in + mingw) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_at_file at_file operation archive +# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE +# for each of them. +# When interpreting the content of the @FILE, do NOT use func_file_conv, +# since the user would need to supply preconverted file names to +# binutils ar, at least for MinGW. +func_at_file () +{ + operation=$2 + archive=$3 + at_file_contents=`cat "$1"` + eval set x "$at_file_contents" + shift + + for member + do + $AR -NOLOGO $operation:"$member" "$archive" || exit $? + done +} + +case $1 in + '') + func_error "no command. Try '$0 --help' for more information." + ;; + -h | --h*) + cat < /* to declare isupper(), tolower() */ +#ifdef NEED_SIGNAL_CATCHER +#include /* to declare signal() */ +#endif +#ifdef USE_SETMODE +#include /* to declare setmode()'s parameter macros */ +/* If you have setmode() but not , just delete this line: */ +#include /* to declare setmode() */ +#endif + + +/* + * Signal catcher to ensure that temporary files are removed before aborting. + * NB: for Amiga Manx C this is actually a global routine named _abort(); + * we put "#define signal_catcher _abort" in jconfig.h. Talk about bogus... + */ + +#ifdef NEED_SIGNAL_CATCHER + +static j_common_ptr sig_cinfo; + +void /* must be global for Manx C */ +signal_catcher (int signum) +{ + if (sig_cinfo != NULL) { + if (sig_cinfo->err != NULL) /* turn off trace output */ + sig_cinfo->err->trace_level = 0; + jpeg_destroy(sig_cinfo); /* clean up memory allocation & temp files */ + } + exit(EXIT_FAILURE); +} + + +GLOBAL(void) +enable_signal_catcher (j_common_ptr cinfo) +{ + sig_cinfo = cinfo; +#ifdef SIGINT /* not all systems have SIGINT */ + signal(SIGINT, signal_catcher); +#endif +#ifdef SIGTERM /* not all systems have SIGTERM */ + signal(SIGTERM, signal_catcher); +#endif +} + +#endif + + +/* + * Optional progress monitor: display a percent-done figure on stderr. + */ + +#ifdef PROGRESS_REPORT + +METHODDEF(void) +progress_monitor (j_common_ptr cinfo) +{ + cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress; + int total_passes = prog->pub.total_passes + prog->total_extra_passes; + int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit); + + if (percent_done != prog->percent_done) { + prog->percent_done = percent_done; + if (total_passes > 1) { + fprintf(stderr, "\rPass %d/%d: %3d%% ", + prog->pub.completed_passes + prog->completed_extra_passes + 1, + total_passes, percent_done); + } else { + fprintf(stderr, "\r %3d%% ", percent_done); + } + fflush(stderr); + } +} + + +GLOBAL(void) +start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress) +{ + /* Enable progress display, unless trace output is on */ + if (cinfo->err->trace_level == 0) { + progress->pub.progress_monitor = progress_monitor; + progress->completed_extra_passes = 0; + progress->total_extra_passes = 0; + progress->percent_done = -1; + cinfo->progress = &progress->pub; + } +} + + +GLOBAL(void) +end_progress_monitor (j_common_ptr cinfo) +{ + /* Clear away progress display */ + if (cinfo->err->trace_level == 0) { + fprintf(stderr, "\r \r"); + fflush(stderr); + } +} + +#endif + + +/* + * Case-insensitive matching of possibly-abbreviated keyword switches. + * keyword is the constant keyword (must be lower case already), + * minchars is length of minimum legal abbreviation. + */ + +GLOBAL(boolean) +keymatch (char * arg, const char * keyword, int minchars) +{ + register int ca, ck; + register int nmatched = 0; + + while ((ca = *arg++) != '\0') { + if ((ck = *keyword++) == '\0') + return FALSE; /* arg longer than keyword, no good */ + if (isupper(ca)) /* force arg to lcase (assume ck is already) */ + ca = tolower(ca); + if (ca != ck) + return FALSE; /* no good */ + nmatched++; /* count matched characters */ + } + /* reached end of argument; fail if it's too short for unique abbrev */ + if (nmatched < minchars) + return FALSE; + return TRUE; /* A-OK */ +} + + +/* + * Routines to establish binary I/O mode for stdin and stdout. + * Non-Unix systems often require some hacking to get out of text mode. + */ + +GLOBAL(FILE *) +read_stdin (void) +{ + FILE * input_file = stdin; + +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdin), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) { + fprintf(stderr, "Cannot reopen stdin\n"); + exit(EXIT_FAILURE); + } +#endif + return input_file; +} + + +GLOBAL(FILE *) +write_stdout (void) +{ + FILE * output_file = stdout; + +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdout), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { + fprintf(stderr, "Cannot reopen stdout\n"); + exit(EXIT_FAILURE); + } +#endif + return output_file; +} diff --git a/src/SDL2/external/jpeg-9/cdjpeg.h b/src/SDL2/external/jpeg-9/cdjpeg.h new file mode 100644 index 000000000..ed024ac3a --- /dev/null +++ b/src/SDL2/external/jpeg-9/cdjpeg.h @@ -0,0 +1,187 @@ +/* + * cdjpeg.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains common declarations for the sample applications + * cjpeg and djpeg. It is NOT used by the core JPEG library. + */ + +#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */ +#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" /* get library error codes too */ +#include "cderror.h" /* get application-specific error codes */ + + +/* + * Object interface for cjpeg's source file decoding modules + */ + +typedef struct cjpeg_source_struct * cjpeg_source_ptr; + +struct cjpeg_source_struct { + JMETHOD(void, start_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(void, finish_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + + FILE *input_file; + + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * Object interface for djpeg's output file encoding modules + */ + +typedef struct djpeg_dest_struct * djpeg_dest_ptr; + +struct djpeg_dest_struct { + /* start_output is called after jpeg_start_decompress finishes. + * The color map will be ready at this time, if one is needed. + */ + JMETHOD(void, start_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + /* Emit the specified number of pixel rows from the buffer. */ + JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied)); + /* Finish up at the end of the image. */ + JMETHOD(void, finish_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + + /* Target file spec; filled in by djpeg.c after object is created. */ + FILE * output_file; + + /* Output pixel-row buffer. Created by module init or start_output. + * Width is cinfo->output_width * cinfo->output_components; + * height is buffer_height. + */ + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * cjpeg/djpeg may need to perform extra passes to convert to or from + * the source/destination file format. The JPEG library does not know + * about these passes, but we'd like them to be counted by the progress + * monitor. We use an expanded progress monitor object to hold the + * additional pass count. + */ + +struct cdjpeg_progress_mgr { + struct jpeg_progress_mgr pub; /* fields known to JPEG library */ + int completed_extra_passes; /* extra passes completed */ + int total_extra_passes; /* total extra */ + /* last printed percentage stored here to avoid multiple printouts */ + int percent_done; +}; + +typedef struct cdjpeg_progress_mgr * cd_progress_ptr; + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_read_bmp jIRdBMP +#define jinit_write_bmp jIWrBMP +#define jinit_read_gif jIRdGIF +#define jinit_write_gif jIWrGIF +#define jinit_read_ppm jIRdPPM +#define jinit_write_ppm jIWrPPM +#define jinit_read_rle jIRdRLE +#define jinit_write_rle jIWrRLE +#define jinit_read_targa jIRdTarga +#define jinit_write_targa jIWrTarga +#define read_quant_tables RdQTables +#define read_scan_script RdScnScript +#define set_quality_ratings SetQRates +#define set_quant_slots SetQSlots +#define set_sample_factors SetSFacts +#define read_color_map RdCMap +#define enable_signal_catcher EnSigCatcher +#define start_progress_monitor StProgMon +#define end_progress_monitor EnProgMon +#define read_stdin RdStdin +#define write_stdout WrStdout +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Module selection routines for I/O modules. */ + +EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo, + boolean is_os2)); +EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo)); + +/* cjpeg support routines (in rdswitch.c) */ + +EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename, + boolean force_baseline)); +EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename)); +EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg, + boolean force_baseline)); +EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg)); +EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg)); + +/* djpeg support routines (in rdcolmap.c) */ + +EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* common support routines (in cdjpeg.c) */ + +EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo)); +EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo, + cd_progress_ptr progress)); +EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo)); +EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars)); +EXTERN(FILE *) read_stdin JPP((void)); +EXTERN(FILE *) write_stdout JPP((void)); + +/* miscellaneous useful macros */ + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define WRITE_BINARY "w" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define WRITE_BINARY "wb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define WRITE_BINARY "wb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif +#ifndef EXIT_WARNING +#ifdef VMS +#define EXIT_WARNING 1 /* VMS is very nonstandard */ +#else +#define EXIT_WARNING 2 +#endif +#endif diff --git a/src/SDL2/external/jpeg-9/change.log b/src/SDL2/external/jpeg-9/change.log new file mode 100644 index 000000000..a1d94ff47 --- /dev/null +++ b/src/SDL2/external/jpeg-9/change.log @@ -0,0 +1,382 @@ +CHANGE LOG for Independent JPEG Group's JPEG software + + +Version 9 13-Jan-2013 +---------------------- + +Add cjpeg -rgb1 option to create an RGB JPEG file, and insert +a simple reversible color transform into the processing which +significantly improves the compression. +The recommended command for lossless coding of RGB images is now +cjpeg -rgb1 -block 1 -arithmetic. +As said, this option improves the compression significantly, but +the files are not compatible with JPEG decoders prior to IJG v9 +due to the included color transform. +The used color transform and marker signaling is compatible with +other JPEG standards (e.g., JPEG-LS part 2). + +Remove the automatic de-ANSI-fication support (Automake 1.12). +Thank also to Nitin A Kamble for suggestion. + +Add remark for jpeg_mem_dest() in jdatadst.c. +Thank to Elie-Gregoire Khoury for the hint. + +Support files with invalid component identifiers (created +by Adobe PDF). Thank to Robin Watts for the suggestion. + +Adapt full buffer case in jcmainct.c for use with scaled DCT. +Thank to Sergii Biloshytskyi for the suggestion. + +Add type identifier for declaration of noreturn functions. +Thank to Brett L. Moore for the suggestion. + +Correct argument type in format string, avoid compiler warnings. +Thank to Vincent Torri for hint. + +Add missing #include directives in configuration checks, avoid +configuration errors. Thank to John Spencer for the hint. + + +Version 8d 15-Jan-2012 +----------------------- + +Add cjpeg -rgb option to create RGB JPEG files. +Using this switch suppresses the conversion from RGB +colorspace input to the default YCbCr JPEG colorspace. +This feature allows true lossless JPEG coding of RGB color images. +The recommended command for this purpose is currently +cjpeg -rgb -block 1 -arithmetic. +SmartScale capable decoder (introduced with IJG JPEG 8) required. +Thank to Michael Koch for the initial suggestion. + +Add option to disable the region adjustment in the transupp crop code. +Thank to Jeffrey Friedl for the suggestion. + +Thank to Richard Jones and Edd Dawson for various minor corrections. + +Thank to Akim Demaille for configure.ac cleanup. + + +Version 8c 16-Jan-2011 +----------------------- + +Add option to compression library and cjpeg (-block N) to use +different DCT block size. +All N from 1 to 16 are possible. Default is 8 (baseline format). +Larger values produce higher compression, +smaller values produce higher quality. +SmartScale capable decoder (introduced with IJG JPEG 8) required. + + +Version 8b 16-May-2010 +----------------------- + +Repair problem in new memory source manager with corrupt JPEG data. +Thank to Ted Campbell and Samuel Chun for the report. + +Repair problem in Makefile.am test target. +Thank to anonymous user for the report. + +Support MinGW installation with automatic configure. +Thank to Volker Grabsch for the suggestion. + + +Version 8a 28-Feb-2010 +----------------------- + +Writing tables-only datastreams via jpeg_write_tables works again. + +Support 32-bit BMPs (RGB image with Alpha channel) for read in cjpeg. +Thank to Brett Blackham for the suggestion. + +Improve accuracy in floating point IDCT calculation. +Thank to Robert Hooke for the hint. + + +Version 8 10-Jan-2010 +---------------------- + +jpegtran now supports the same -scale option as djpeg for "lossless" resize. +An implementation of the JPEG SmartScale extension is required for this +feature. A (draft) specification of the JPEG SmartScale extension is +available as a contributed document at ITU and ISO. Revision 2 or later +of the document is required (latest document version is Revision 3). +The SmartScale extension will enable more features beside lossless resize +in future implementations, as described in the document (new compression +options). + +Add sanity check in BMP reader module to avoid cjpeg crash for empty input +image (thank to Isaev Ildar of ISP RAS, Moscow, RU for reporting this error). + +Add data source and destination managers for read from and write to +memory buffers. New API functions jpeg_mem_src and jpeg_mem_dest. +Thank to Roberto Boni from Italy for the suggestion. + + +Version 7 27-Jun-2009 +---------------------- + +New scaled DCTs implemented. +djpeg now supports scalings N/8 with all N from 1 to 16. +cjpeg now supports scalings 8/N with all N from 1 to 16. +Scaled DCTs with size larger than 8 are now also used for resolving the +common 2x2 chroma subsampling case without additional spatial resampling. +Separate spatial resampling for those kind of files is now only necessary +for N>8 scaling cases. +Furthermore, separate scaled DCT functions are provided for direct resolving +of the common asymmetric subsampling cases (2x1 and 1x2) without additional +spatial resampling. + +cjpeg -quality option has been extended for support of separate quality +settings for luminance and chrominance (or in general, for every provided +quantization table slot). +New API function jpeg_default_qtables() and q_scale_factor array in library. + +Added -nosmooth option to cjpeg, complementary to djpeg. +New variable "do_fancy_downsampling" in library, complement to fancy +upsampling. Fancy upsampling now uses direct DCT scaling with sizes +larger than 8. The old method is not reversible and has been removed. + +Support arithmetic entropy encoding and decoding. +Added files jaricom.c, jcarith.c, jdarith.c. + +Straighten the file structure: +Removed files jidctred.c, jcphuff.c, jchuff.h, jdphuff.c, jdhuff.h. + +jpegtran has a new "lossless" cropping feature. + +Implement -perfect option in jpegtran, new API function +jtransform_perfect_transform() in transupp. (DP 204_perfect.dpatch) + +Better error messages for jpegtran fopen failure. +(DP 203_jpegtran_errmsg.dpatch) + +Fix byte order issue with 16bit PPM/PGM files in rdppm.c/wrppm.c: +according to Netpbm, the de facto standard implementation of the PNM formats, +the most significant byte is first. (DP 203_rdppm.dpatch) + +Add -raw option to rdjpgcom not to mangle the output. +(DP 205_rdjpgcom_raw.dpatch) + +Make rdjpgcom locale aware. (DP 201_rdjpgcom_locale.dpatch) + +Add extern "C" to jpeglib.h. +This avoids the need to put extern "C" { ... } around #include "jpeglib.h" +in your C++ application. Defining the symbol DONT_USE_EXTERN_C in the +configuration prevents this. (DP 202_jpeglib.h_c++.dpatch) + + +Version 6b 27-Mar-1998 +----------------------- + +jpegtran has new features for lossless image transformations (rotation +and flipping) as well as "lossless" reduction to grayscale. + +jpegtran now copies comments by default; it has a -copy switch to enable +copying all APPn blocks as well, or to suppress comments. (Formerly it +always suppressed comments and APPn blocks.) jpegtran now also preserves +JFIF version and resolution information. + +New decompressor library feature: COM and APPn markers found in the input +file can be saved in memory for later use by the application. (Before, +you had to code this up yourself with a custom marker processor.) + +There is an unused field "void * client_data" now in compress and decompress +parameter structs; this may be useful in some applications. + +JFIF version number information is now saved by the decoder and accepted by +the encoder. jpegtran uses this to copy the source file's version number, +to ensure "jpegtran -copy all" won't create bogus files that contain JFXX +extensions but claim to be version 1.01. Applications that generate their +own JFXX extension markers also (finally) have a supported way to cause the +encoder to emit JFIF version number 1.02. + +djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather +than as unknown APP0 markers. + +In -verbose mode, djpeg and rdjpgcom will try to print the contents of +APP12 markers as text. Some digital cameras store useful text information +in APP12 markers. + +Handling of truncated data streams is more robust: blocks beyond the one in +which the error occurs will be output as uniform gray, or left unchanged +if decoding a progressive JPEG. The appearance no longer depends on the +Huffman tables being used. + +Huffman tables are checked for validity much more carefully than before. + +To avoid the Unisys LZW patent, djpeg's GIF output capability has been +changed to produce "uncompressed GIFs", and cjpeg's GIF input capability +has been removed altogether. We're not happy about it either, but there +seems to be no good alternative. + +The configure script now supports building libjpeg as a shared library +on many flavors of Unix (all the ones that GNU libtool knows how to +build shared libraries for). Use "./configure --enable-shared" to +try this out. + +New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio. +Also, a jconfig file and a build script for Metrowerks CodeWarrior +on Apple Macintosh. makefile.dj has been updated for DJGPP v2, and there +are miscellaneous other minor improvements in the makefiles. + +jmemmac.c now knows how to create temporary files following Mac System 7 +conventions. + +djpeg's -map switch is now able to read raw-format PPM files reliably. + +cjpeg -progressive -restart no longer generates any unnecessary DRI markers. + +Multiple calls to jpeg_simple_progression for a single JPEG object +no longer leak memory. + + +Version 6a 7-Feb-96 +-------------------- + +Library initialization sequence modified to detect version mismatches +and struct field packing mismatches between library and calling application. +This change requires applications to be recompiled, but does not require +any application source code change. + +All routine declarations changed to the style "GLOBAL(type) name ...", +that is, GLOBAL, LOCAL, METHODDEF, EXTERN are now macros taking the +routine's return type as an argument. This makes it possible to add +Microsoft-style linkage keywords to all the routines by changing just +these macros. Note that any application code that was using these macros +will have to be changed. + +DCT coefficient quantization tables are now stored in normal array order +rather than zigzag order. Application code that calls jpeg_add_quant_table, +or otherwise manipulates quantization tables directly, will need to be +changed. If you need to make such code work with either older or newer +versions of the library, a test like "#if JPEG_LIB_VERSION >= 61" is +recommended. + +djpeg's trace capability now dumps DQT tables in natural order, not zigzag +order. This allows the trace output to be made into a "-qtables" file +more easily. + +New system-dependent memory manager module for use on Apple Macintosh. + +Fix bug in cjpeg's -smooth option: last one or two scanlines would be +duplicates of the prior line unless the image height mod 16 was 1 or 2. + +Repair minor problems in VMS, BCC, MC6 makefiles. + +New configure script based on latest GNU Autoconf. + +Correct the list of include files needed by MetroWerks C for ccommand(). + +Numerous small documentation updates. + + +Version 6 2-Aug-95 +------------------- + +Progressive JPEG support: library can read and write full progressive JPEG +files. A "buffered image" mode supports incremental decoding for on-the-fly +display of progressive images. Simply recompiling an existing IJG-v5-based +decoder with v6 should allow it to read progressive files, though of course +without any special progressive display. + +New "jpegtran" application performs lossless transcoding between different +JPEG formats; primarily, it can be used to convert baseline to progressive +JPEG and vice versa. In support of jpegtran, the library now allows lossless +reading and writing of JPEG files as DCT coefficient arrays. This ability +may be of use in other applications. + +Notes for programmers: +* We changed jpeg_start_decompress() to be able to suspend; this makes all +decoding modes available to suspending-input applications. However, +existing applications that use suspending input will need to be changed +to check the return value from jpeg_start_decompress(). You don't need to +do anything if you don't use a suspending data source. +* We changed the interface to the virtual array routines: access_virt_array +routines now take a count of the number of rows to access this time. The +last parameter to request_virt_array routines is now interpreted as the +maximum number of rows that may be accessed at once, but not necessarily +the height of every access. + + +Version 5b 15-Mar-95 +--------------------- + +Correct bugs with grayscale images having v_samp_factor > 1. + +jpeg_write_raw_data() now supports output suspension. + +Correct bugs in "configure" script for case of compiling in +a directory other than the one containing the source files. + +Repair bug in jquant1.c: sometimes didn't use as many colors as it could. + +Borland C makefile and jconfig file work under either MS-DOS or OS/2. + +Miscellaneous improvements to documentation. + + +Version 5a 7-Dec-94 +-------------------- + +Changed color conversion roundoff behavior so that grayscale values are +represented exactly. (This causes test image files to change.) + +Make ordered dither use 16x16 instead of 4x4 pattern for a small quality +improvement. + +New configure script based on latest GNU Autoconf. +Fix configure script to handle CFLAGS correctly. +Rename *.auto files to *.cfg, so that configure script still works if +file names have been truncated for DOS. + +Fix bug in rdbmp.c: didn't allow for extra data between header and image. + +Modify rdppm.c/wrppm.c to handle 2-byte raw PPM/PGM formats for 12-bit data. + +Fix several bugs in rdrle.c. + +NEED_SHORT_EXTERNAL_NAMES option was broken. + +Revise jerror.h/jerror.c for more flexibility in message table. + +Repair oversight in jmemname.c NO_MKTEMP case: file could be there +but unreadable. + + +Version 5 24-Sep-94 +-------------------- + +Version 5 represents a nearly complete redesign and rewrite of the IJG +software. Major user-visible changes include: + * Automatic configuration simplifies installation for most Unix systems. + * A range of speed vs. image quality tradeoffs are supported. + This includes resizing of an image during decompression: scaling down + by a factor of 1/2, 1/4, or 1/8 is handled very efficiently. + * New programs rdjpgcom and wrjpgcom allow insertion and extraction + of text comments in a JPEG file. + +The application programmer's interface to the library has changed completely. +Notable improvements include: + * We have eliminated the use of callback routines for handling the + uncompressed image data. The application now sees the library as a + set of routines that it calls to read or write image data on a + scanline-by-scanline basis. + * The application image data is represented in a conventional interleaved- + pixel format, rather than as a separate array for each color channel. + This can save a copying step in many programs. + * The handling of compressed data has been cleaned up: the application can + supply routines to source or sink the compressed data. It is possible to + suspend processing on source/sink buffer overrun, although this is not + supported in all operating modes. + * All static state has been eliminated from the library, so that multiple + instances of compression or decompression can be active concurrently. + * JPEG abbreviated datastream formats are supported, ie, quantization and + Huffman tables can be stored separately from the image data. + * And not only that, but the documentation of the library has improved + considerably! + + +The last widely used release before the version 5 rewrite was version 4A of +18-Feb-93. Change logs before that point have been discarded, since they +are not of much interest after the rewrite. diff --git a/src/SDL2/external/jpeg-9/cjpeg.1 b/src/SDL2/external/jpeg-9/cjpeg.1 new file mode 100644 index 000000000..e0b8d4302 --- /dev/null +++ b/src/SDL2/external/jpeg-9/cjpeg.1 @@ -0,0 +1,366 @@ +.TH CJPEG 1 "4 May 2012" +.SH NAME +cjpeg \- compress an image file to a JPEG file +.SH SYNOPSIS +.B cjpeg +[ +.I options +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B cjpeg +compresses the named image file, or the standard input if no file is +named, and produces a JPEG/JFIF file on the standard output. +The currently supported input file formats are: PPM (PBMPLUS color +format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster +Toolkit format). (RLE is supported only if the URT library is available.) +.SH OPTIONS +All switch names may be abbreviated; for example, +.B \-grayscale +may be written +.B \-gray +or +.BR \-gr . +Most of the "basic" switches can be abbreviated to as little as one letter. +Upper and lower case are equivalent (thus +.B \-BMP +is the same as +.BR \-bmp ). +British spellings are also accepted (e.g., +.BR \-greyscale ), +though for brevity these are not mentioned below. +.PP +The basic switches are: +.TP +.BI \-quality " N[,...]" +Scale quantization tables to adjust image quality. Quality is 0 (worst) to +100 (best); default is 75. (See below for more info.) +.TP +.B \-grayscale +Create monochrome JPEG file from color input. Be sure to use this switch when +compressing a grayscale BMP file, because +.B cjpeg +isn't bright enough to notice whether a BMP file uses only shades of gray. +By saying +.BR \-grayscale , +you'll get a smaller JPEG file that takes less time to process. +.TP +.B \-rgb +Create RGB JPEG file. +Using this switch suppresses the conversion from RGB +colorspace input to the default YCbCr JPEG colorspace. +You can use this switch in combination with the +.BI \-block " N" +switch (see below) for lossless JPEG coding. +See also the +.B \-rgb1 +switch below. +.TP +.B \-optimize +Perform optimization of entropy encoding parameters. Without this, default +encoding parameters are used. +.B \-optimize +usually makes the JPEG file a little smaller, but +.B cjpeg +runs somewhat slower and needs much more memory. Image quality and speed of +decompression are unaffected by +.BR \-optimize . +.TP +.B \-progressive +Create progressive JPEG file (see below). +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. Currently supported scale factors are +M/N with all N from 1 to 16, where M is the destination DCT size, which is 8 +by default (see +.BI \-block " N" +switch below). +.TP +.B \-targa +Input file is Targa format. Targa files that contain an "identification" +field will not be automatically recognized by +.BR cjpeg ; +for such files you must specify +.B \-targa +to make +.B cjpeg +treat the input as Targa format. +For most Targa files, you won't need this switch. +.PP +The +.B \-quality +switch lets you trade off compressed file size against quality of the +reconstructed image: the higher the quality setting, the larger the JPEG file, +and the closer the output image will be to the original input. Normally you +want to use the lowest quality setting (smallest file) that decompresses into +something visually indistinguishable from the original image. For this +purpose the quality setting should be between 50 and 95; the default of 75 is +often about right. If you see defects at +.B \-quality +75, then go up 5 or 10 counts at a time until you are happy with the output +image. (The optimal setting will vary from one image to another.) +.PP +.B \-quality +100 will generate a quantization table of all 1's, minimizing loss in the +quantization step (but there is still information loss in subsampling, as well +as roundoff error). This setting is mainly of interest for experimental +purposes. Quality values above about 95 are +.B not +recommended for normal use; the compressed file size goes up dramatically for +hardly any gain in output image quality. +.PP +In the other direction, quality values below 50 will produce very small files +of low image quality. Settings around 5 to 10 might be useful in preparing an +index of a large image library, for example. Try +.B \-quality +2 (or so) for some amusing Cubist effects. (Note: quality +values below about 25 generate 2-byte quantization tables, which are +considered optional in the JPEG standard. +.B cjpeg +emits a warning message when you give such a quality value, because some +other JPEG programs may be unable to decode the resulting file. Use +.B \-baseline +if you need to ensure compatibility at low quality values.) +.PP +The +.B \-quality +option has been extended in IJG version 7 for support of separate quality +settings for luminance and chrominance (or in general, for every provided +quantization table slot). This feature is useful for high-quality +applications which cannot accept the damage of color data by coarse +subsampling settings. You can now easily reduce the color data amount more +smoothly with finer control without separate subsampling. The resulting file +is fully compliant with standard JPEG decoders. +Note that the +.B \-quality +ratings refer to the quantization table slots, and that the last value is +replicated if there are more q-table slots than parameters. The default +q-table slots are 0 for luminance and 1 for chrominance with default tables as +given in the JPEG standard. This is compatible with the old behaviour in case +that only one parameter is given, which is then used for both luminance and +chrominance (slots 0 and 1). More or custom quantization tables can be set +with +.B \-qtables +and assigned to components with +.B \-qslots +parameter (see the "wizard" switches below). +.B Caution: +You must explicitly add +.BI \-sample " 1x1" +for efficient separate color +quality selection, since the default value used by library is 2x2! +.PP +The +.B \-progressive +switch creates a "progressive JPEG" file. In this type of JPEG file, the data +is stored in multiple scans of increasing quality. If the file is being +transmitted over a slow communications link, the decoder can use the first +scan to display a low-quality image very quickly, and can then improve the +display with each subsequent scan. The final image is exactly equivalent to a +standard JPEG file of the same quality setting, and the total file size is +about the same --- often a little smaller. +.PP +Switches for advanced users: +.TP +.B \-arithmetic +Use arithmetic coding. +.B Caution: +arithmetic coded JPEG is not yet widely implemented, so many decoders will +be unable to view an arithmetic coded JPEG file at all. +.TP +.BI \-block " N" +Set DCT block size. All N from 1 to 16 are possible. +Default is 8 (baseline format). +Larger values produce higher compression, +smaller values produce higher quality +(exact DCT stage possible with 1 or 2; with the default quality of 75 and +default Luminance qtable the DCT+Quantization stage is lossless for N=1). +.B Caution: +An implementation of the JPEG SmartScale extension is required for this +feature. SmartScale enabled JPEG is not yet widely implemented, so many +decoders will be unable to view a SmartScale extended JPEG file at all. +.TP +.B \-rgb1 +Create RGB JPEG file with reversible color transform. +Works like the +.B \-rgb +switch (see above) and inserts a simple reversible color transform +into the processing which significantly improves the compression. +Use this switch in combination with the +.BI \-block " N" +switch (see above) for lossless JPEG coding. +.B Caution: +A decoder with inverse color transform support is required for +this feature. Reversible color transform support is not yet +widely implemented, so many decoders will be unable to view +a reversible color transformed JPEG file at all. +.TP +.B \-dct int +Use integer DCT method (default). +.TP +.B \-dct fast +Use fast integer DCT (less accurate). +.TP +.B \-dct float +Use floating-point DCT method. +The float method is very slightly more accurate than the int method, but is +much slower unless your machine has very fast floating-point hardware. Also +note that results of the floating-point method may vary slightly across +machines, while the integer methods should give the same results everywhere. +The fast integer method is much less accurate than the other two. +.TP +.B \-nosmooth +Don't use high-quality downsampling. +.TP +.BI \-restart " N" +Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is +attached to the number. +.B \-restart 0 +(the default) means no restart markers. +.TP +.BI \-smooth " N" +Smooth the input image to eliminate dithering noise. N, ranging from 1 to +100, indicates the strength of smoothing. 0 (the default) means no smoothing. +.TP +.BI \-maxmemory " N" +Set limit for amount of memory to use in processing large images. Value is +in thousands of bytes, or millions of bytes if "M" is attached to the +number. For example, +.B \-max 4m +selects 4000000 bytes. If more space is needed, temporary files will be used. +.TP +.BI \-outfile " name" +Send output image to the named file, not to standard output. +.TP +.B \-verbose +Enable debug printout. More +.BR \-v 's +give more output. Also, version information is printed at startup. +.TP +.B \-debug +Same as +.BR \-verbose . +.PP +The +.B \-restart +option inserts extra markers that allow a JPEG decoder to resynchronize after +a transmission error. Without restart markers, any damage to a compressed +file will usually ruin the image from the point of the error to the end of the +image; with restart markers, the damage is usually confined to the portion of +the image up to the next restart marker. Of course, the restart markers +occupy extra space. We recommend +.B \-restart 1 +for images that will be transmitted across unreliable networks such as Usenet. +.PP +The +.B \-smooth +option filters the input to eliminate fine-scale noise. This is often useful +when converting dithered images to JPEG: a moderate smoothing factor of 10 to +50 gets rid of dithering patterns in the input file, resulting in a smaller +JPEG file and a better-looking image. Too large a smoothing factor will +visibly blur the image, however. +.PP +Switches for wizards: +.TP +.B \-baseline +Force baseline-compatible quantization tables to be generated. This clamps +quantization values to 8 bits even at low quality settings. (This switch is +poorly named, since it does not ensure that the output is actually baseline +JPEG. For example, you can use +.B \-baseline +and +.B \-progressive +together.) +.TP +.BI \-qtables " file" +Use the quantization tables given in the specified text file. +.TP +.BI \-qslots " N[,...]" +Select which quantization table to use for each color component. +.TP +.BI \-sample " HxV[,...]" +Set JPEG sampling factors for each color component. +.TP +.BI \-scans " file" +Use the scan script given in the specified text file. +.PP +The "wizard" switches are intended for experimentation with JPEG. If you +don't know what you are doing, \fBdon't use them\fR. These switches are +documented further in the file wizard.txt. +.SH EXAMPLES +.LP +This example compresses the PPM file foo.ppm with a quality factor of +60 and saves the output as foo.jpg: +.IP +.B cjpeg \-quality +.I 60 foo.ppm +.B > +.I foo.jpg +.SH HINTS +Color GIF files are not the ideal input for JPEG; JPEG is really intended for +compressing full-color (24-bit) images. In particular, don't try to convert +cartoons, line drawings, and other images that have only a few distinct +colors. GIF works great on these, JPEG does not. If you want to convert a +GIF to JPEG, you should experiment with +.BR cjpeg 's +.B \-quality +and +.B \-smooth +options to get a satisfactory conversion. +.B \-smooth 10 +or so is often helpful. +.PP +Avoid running an image through a series of JPEG compression/decompression +cycles. Image quality loss will accumulate; after ten or so cycles the image +may be noticeably worse than it was after one cycle. It's best to use a +lossless format while manipulating an image, then convert to JPEG format when +you are ready to file the image away. +.PP +The +.B \-optimize +option to +.B cjpeg +is worth using when you are making a "final" version for posting or archiving. +It's also a win when you are using low quality settings to make very small +JPEG files; the percentage improvement is often a lot more than it is on +larger files. (At present, +.B \-optimize +mode is always selected when generating progressive JPEG files.) +.SH ENVIRONMENT +.TP +.B JPEGMEM +If this environment variable is set, its value is the default memory limit. +The value is specified as described for the +.B \-maxmemory +switch. +.B JPEGMEM +overrides the default value specified when the program was compiled, and +itself is overridden by an explicit +.BR \-maxmemory . +.SH SEE ALSO +.BR djpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1), +.BR wrjpgcom (1) +.br +.BR ppm (5), +.BR pgm (5) +.br +Wallace, Gregory K. "The JPEG Still Picture Compression Standard", +Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. +.SH AUTHOR +Independent JPEG Group +.SH BUGS +GIF input files are no longer supported, to avoid the Unisys LZW patent. +(Conversion of GIF files to JPEG is usually a bad idea anyway.) +.PP +Not all variants of BMP and Targa file formats are supported. +.PP +The +.B \-targa +switch is not a bug, it's a feature. (It would be a bug if the Targa format +designers had not been clueless.) diff --git a/src/SDL2/external/jpeg-9/cjpeg.c b/src/SDL2/external/jpeg-9/cjpeg.c new file mode 100644 index 000000000..d05cdd0a9 --- /dev/null +++ b/src/SDL2/external/jpeg-9/cjpeg.c @@ -0,0 +1,652 @@ +/* + * cjpeg.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2003-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a command-line user interface for the JPEG compressor. + * It should work on any system with Unix- or MS-DOS-style command lines. + * + * Two different command line styles are permitted, depending on the + * compile-time switch TWO_FILE_COMMANDLINE: + * cjpeg [options] inputfile outputfile + * cjpeg [options] [inputfile] + * In the second style, output is always to standard output, which you'd + * normally redirect to a file or pipe to some other program. Input is + * either from a named file or from standard input (typically redirected). + * The second style is convenient on Unix but is unhelpful on systems that + * don't support pipes. Also, you MUST use the first style if your system + * doesn't do binary I/O to stdin/stdout. + * To simplify script writing, the "-outfile" switch is provided. The syntax + * cjpeg [options] -outfile outputfile inputfile + * works regardless of which command line style is used. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include "jversion.h" /* for version message */ + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + + +/* Create the add-on message string table. */ + +#define JMESSAGE(code,string) string , + +static const char * const cdjpeg_message_table[] = { +#include "cderror.h" + NULL +}; + + +/* + * This routine determines what format the input file is, + * and selects the appropriate input-reading module. + * + * To determine which family of input formats the file belongs to, + * we may look only at the first byte of the file, since C does not + * guarantee that more than one character can be pushed back with ungetc. + * Looking at additional bytes would require one of these approaches: + * 1) assume we can fseek() the input file (fails for piped input); + * 2) assume we can push back more than one character (works in + * some C implementations, but unportable); + * 3) provide our own buffering (breaks input readers that want to use + * stdio directly, such as the RLE library); + * or 4) don't put back the data, and modify the input_init methods to assume + * they start reading after the start of file (also breaks RLE library). + * #1 is attractive for MS-DOS but is untenable on Unix. + * + * The most portable solution for file types that can't be identified by their + * first byte is to make the user tell us what they are. This is also the + * only approach for "raw" file types that contain only arbitrary values. + * We presently apply this method for Targa files. Most of the time Targa + * files start with 0x00, so we recognize that case. Potentially, however, + * a Targa file could start with any byte value (byte 0 is the length of the + * seldom-used ID field), so we provide a switch to force Targa input mode. + */ + +static boolean is_targa; /* records user -targa switch */ + + +LOCAL(cjpeg_source_ptr) +select_file_type (j_compress_ptr cinfo, FILE * infile) +{ + int c; + + if (is_targa) { +#ifdef TARGA_SUPPORTED + return jinit_read_targa(cinfo); +#else + ERREXIT(cinfo, JERR_TGA_NOTCOMP); +#endif + } + + if ((c = getc(infile)) == EOF) + ERREXIT(cinfo, JERR_INPUT_EMPTY); + if (ungetc(c, infile) == EOF) + ERREXIT(cinfo, JERR_UNGETC_FAILED); + + switch (c) { +#ifdef BMP_SUPPORTED + case 'B': + return jinit_read_bmp(cinfo); +#endif +#ifdef GIF_SUPPORTED + case 'G': + return jinit_read_gif(cinfo); +#endif +#ifdef PPM_SUPPORTED + case 'P': + return jinit_read_ppm(cinfo); +#endif +#ifdef RLE_SUPPORTED + case 'R': + return jinit_read_rle(cinfo); +#endif +#ifdef TARGA_SUPPORTED + case 0x00: + return jinit_read_targa(cinfo); +#endif + default: + ERREXIT(cinfo, JERR_UNKNOWN_FORMAT); + break; + } + + return NULL; /* suppress compiler warnings */ +} + + +/* + * Argument-parsing code. + * The switch parser is designed to be useful with DOS-style command line + * syntax, ie, intermixed switches and file names, where only the switches + * to the left of a given file name affect processing of that file. + * The main program in this file doesn't actually use this capability... + */ + + +static const char * progname; /* program name for error messages */ +static char * outfilename; /* for -outfile switch */ + + +LOCAL(void) +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "usage: %s [switches] ", progname); +#ifdef TWO_FILE_COMMANDLINE + fprintf(stderr, "inputfile outputfile\n"); +#else + fprintf(stderr, "[inputfile]\n"); +#endif + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -quality N[,...] Compression quality (0..100; 5-95 is useful range)\n"); + fprintf(stderr, " -grayscale Create monochrome JPEG file\n"); + fprintf(stderr, " -rgb Create RGB JPEG file\n"); +#ifdef ENTROPY_OPT_SUPPORTED + fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n"); +#endif +#ifdef C_PROGRESSIVE_SUPPORTED + fprintf(stderr, " -progressive Create progressive JPEG file\n"); +#endif +#ifdef DCT_SCALING_SUPPORTED + fprintf(stderr, " -scale M/N Scale image by fraction M/N, eg, 1/2\n"); +#endif +#ifdef TARGA_SUPPORTED + fprintf(stderr, " -targa Input file is Targa format (usually not needed)\n"); +#endif + fprintf(stderr, "Switches for advanced users:\n"); +#ifdef C_ARITH_CODING_SUPPORTED + fprintf(stderr, " -arithmetic Use arithmetic coding\n"); +#endif +#ifdef DCT_SCALING_SUPPORTED + fprintf(stderr, " -block N DCT block size (1..16; default is 8)\n"); +#endif +#if JPEG_LIB_VERSION_MAJOR >= 9 + fprintf(stderr, " -rgb1 Create RGB JPEG file with reversible color transform\n"); +#endif +#ifdef DCT_ISLOW_SUPPORTED + fprintf(stderr, " -dct int Use integer DCT method%s\n", + (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : "")); +#endif +#ifdef DCT_IFAST_SUPPORTED + fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n", + (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : "")); +#endif +#ifdef DCT_FLOAT_SUPPORTED + fprintf(stderr, " -dct float Use floating-point DCT method%s\n", + (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : "")); +#endif + fprintf(stderr, " -nosmooth Don't use high-quality downsampling\n"); + fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n"); +#ifdef INPUT_SMOOTHING_SUPPORTED + fprintf(stderr, " -smooth N Smooth dithered input (N=1..100 is strength)\n"); +#endif + fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); + fprintf(stderr, " -outfile name Specify name for output file\n"); + fprintf(stderr, " -verbose or -debug Emit debug output\n"); + fprintf(stderr, "Switches for wizards:\n"); + fprintf(stderr, " -baseline Force baseline quantization tables\n"); + fprintf(stderr, " -qtables file Use quantization tables given in file\n"); + fprintf(stderr, " -qslots N[,...] Set component quantization tables\n"); + fprintf(stderr, " -sample HxV[,...] Set component sampling factors\n"); +#ifdef C_MULTISCAN_FILES_SUPPORTED + fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n"); +#endif + exit(EXIT_FAILURE); +} + + +LOCAL(int) +parse_switches (j_compress_ptr cinfo, int argc, char **argv, + int last_file_arg_seen, boolean for_real) +/* Parse optional switches. + * Returns argv[] index of first file-name argument (== argc if none). + * Any file names with indexes <= last_file_arg_seen are ignored; + * they have presumably been processed in a previous iteration. + * (Pass 0 for last_file_arg_seen on the first or only iteration.) + * for_real is FALSE on the first (dummy) pass; we may skip any expensive + * processing. + */ +{ + int argn; + char * arg; + boolean force_baseline; + boolean simple_progressive; + char * qualityarg = NULL; /* saves -quality parm if any */ + char * qtablefile = NULL; /* saves -qtables filename if any */ + char * qslotsarg = NULL; /* saves -qslots parm if any */ + char * samplearg = NULL; /* saves -sample parm if any */ + char * scansarg = NULL; /* saves -scans parm if any */ + + /* Set up default JPEG parameters. */ + + force_baseline = FALSE; /* by default, allow 16-bit quantizers */ + simple_progressive = FALSE; + is_targa = FALSE; + outfilename = NULL; + cinfo->err->trace_level = 0; + + /* Scan command line options, adjust parameters */ + + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (*arg != '-') { + /* Not a switch, must be a file name argument */ + if (argn <= last_file_arg_seen) { + outfilename = NULL; /* -outfile applies to just one input file */ + continue; /* ignore this name if previously processed */ + } + break; /* else done parsing switches */ + } + arg++; /* advance past switch marker character */ + + if (keymatch(arg, "arithmetic", 1)) { + /* Use arithmetic coding. */ +#ifdef C_ARITH_CODING_SUPPORTED + cinfo->arith_code = TRUE; +#else + fprintf(stderr, "%s: sorry, arithmetic coding not supported\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "baseline", 2)) { + /* Force baseline-compatible output (8-bit quantizer values). */ + force_baseline = TRUE; + + } else if (keymatch(arg, "block", 2)) { + /* Set DCT block size. */ +#if defined DCT_SCALING_SUPPORTED && JPEG_LIB_VERSION_MAJOR >= 8 && \ + (JPEG_LIB_VERSION_MAJOR > 8 || JPEG_LIB_VERSION_MINOR >= 3) + int val; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%d", &val) != 1) + usage(); + if (val < 1 || val > 16) + usage(); + cinfo->block_size = val; +#else + fprintf(stderr, "%s: sorry, block size setting not supported\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "dct", 2)) { + /* Select DCT algorithm. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "int", 1)) { + cinfo->dct_method = JDCT_ISLOW; + } else if (keymatch(argv[argn], "fast", 2)) { + cinfo->dct_method = JDCT_IFAST; + } else if (keymatch(argv[argn], "float", 2)) { + cinfo->dct_method = JDCT_FLOAT; + } else + usage(); + + } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { + /* Enable debug printouts. */ + /* On first -d, print version identification */ + static boolean printed_version = FALSE; + + if (! printed_version) { + fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n", + JVERSION, JCOPYRIGHT); + printed_version = TRUE; + } + cinfo->err->trace_level++; + + } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) { + /* Force a monochrome JPEG file to be generated. */ + jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); + + } else if (keymatch(arg, "rgb", 3) || keymatch(arg, "rgb1", 4)) { + /* Force an RGB JPEG file to be generated. */ +#if JPEG_LIB_VERSION_MAJOR >= 9 + /* Note: Entropy table assignment in jpeg_set_colorspace depends + * on color_transform. + */ + cinfo->color_transform = arg[3] ? JCT_SUBTRACT_GREEN : JCT_NONE; +#endif + jpeg_set_colorspace(cinfo, JCS_RGB); + + } else if (keymatch(arg, "maxmemory", 3)) { + /* Maximum memory in Kb (or Mb with 'm'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (ch == 'm' || ch == 'M') + lval *= 1000L; + cinfo->mem->max_memory_to_use = lval * 1000L; + + } else if (keymatch(arg, "nosmooth", 3)) { + /* Suppress fancy downsampling. */ + cinfo->do_fancy_downsampling = FALSE; + + } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) { + /* Enable entropy parm optimization. */ +#ifdef ENTROPY_OPT_SUPPORTED + cinfo->optimize_coding = TRUE; +#else + fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "outfile", 4)) { + /* Set output file name. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + outfilename = argv[argn]; /* save it away for later use */ + + } else if (keymatch(arg, "progressive", 1)) { + /* Select simple progressive mode. */ +#ifdef C_PROGRESSIVE_SUPPORTED + simple_progressive = TRUE; + /* We must postpone execution until num_components is known. */ +#else + fprintf(stderr, "%s: sorry, progressive output was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "quality", 1)) { + /* Quality ratings (quantization table scaling factors). */ + if (++argn >= argc) /* advance to next argument */ + usage(); + qualityarg = argv[argn]; + + } else if (keymatch(arg, "qslots", 2)) { + /* Quantization table slot numbers. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + qslotsarg = argv[argn]; + /* Must delay setting qslots until after we have processed any + * colorspace-determining switches, since jpeg_set_colorspace sets + * default quant table numbers. + */ + + } else if (keymatch(arg, "qtables", 2)) { + /* Quantization tables fetched from file. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + qtablefile = argv[argn]; + /* We postpone actually reading the file in case -quality comes later. */ + + } else if (keymatch(arg, "restart", 1)) { + /* Restart interval in MCU rows (or in MCUs with 'b'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (lval < 0 || lval > 65535L) + usage(); + if (ch == 'b' || ch == 'B') { + cinfo->restart_interval = (unsigned int) lval; + cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */ + } else { + cinfo->restart_in_rows = (int) lval; + /* restart_interval will be computed during startup */ + } + + } else if (keymatch(arg, "sample", 2)) { + /* Set sampling factors. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + samplearg = argv[argn]; + /* Must delay setting sample factors until after we have processed any + * colorspace-determining switches, since jpeg_set_colorspace sets + * default sampling factors. + */ + + } else if (keymatch(arg, "scale", 4)) { + /* Scale the image by a fraction M/N. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%u/%u", + &cinfo->scale_num, &cinfo->scale_denom) != 2) + usage(); + + } else if (keymatch(arg, "scans", 4)) { + /* Set scan script. */ +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + scansarg = argv[argn]; + /* We must postpone reading the file in case -progressive appears. */ +#else + fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "smooth", 2)) { + /* Set input smoothing factor. */ + int val; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%d", &val) != 1) + usage(); + if (val < 0 || val > 100) + usage(); + cinfo->smoothing_factor = val; + + } else if (keymatch(arg, "targa", 1)) { + /* Input file is Targa format. */ + is_targa = TRUE; + + } else { + usage(); /* bogus switch */ + } + } + + /* Post-switch-scanning cleanup */ + + if (for_real) { + + /* Set quantization tables for selected quality. */ + /* Some or all may be overridden if -qtables is present. */ + if (qualityarg != NULL) /* process -quality if it was present */ + if (! set_quality_ratings(cinfo, qualityarg, force_baseline)) + usage(); + + if (qtablefile != NULL) /* process -qtables if it was present */ + if (! read_quant_tables(cinfo, qtablefile, force_baseline)) + usage(); + + if (qslotsarg != NULL) /* process -qslots if it was present */ + if (! set_quant_slots(cinfo, qslotsarg)) + usage(); + + if (samplearg != NULL) /* process -sample if it was present */ + if (! set_sample_factors(cinfo, samplearg)) + usage(); + +#ifdef C_PROGRESSIVE_SUPPORTED + if (simple_progressive) /* process -progressive; -scans can override */ + jpeg_simple_progression(cinfo); +#endif + +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (scansarg != NULL) /* process -scans if it was present */ + if (! read_scan_script(cinfo, scansarg)) + usage(); +#endif + } + + return argn; /* return index of next arg (file name) */ +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + struct jpeg_compress_struct cinfo; + struct jpeg_error_mgr jerr; +#ifdef PROGRESS_REPORT + struct cdjpeg_progress_mgr progress; +#endif + int file_index; + cjpeg_source_ptr src_mgr; + FILE * input_file; + FILE * output_file; + JDIMENSION num_scanlines; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "cjpeg"; /* in case C library doesn't provide it */ + + /* Initialize the JPEG compression object with default error handling. */ + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_compress(&cinfo); + /* Add some application-specific error messages (from cderror.h) */ + jerr.addon_message_table = cdjpeg_message_table; + jerr.first_addon_message = JMSG_FIRSTADDONCODE; + jerr.last_addon_message = JMSG_LASTADDONCODE; + + /* Now safe to enable signal catcher. */ +#ifdef NEED_SIGNAL_CATCHER + enable_signal_catcher((j_common_ptr) &cinfo); +#endif + + /* Initialize JPEG parameters. + * Much of this may be overridden later. + * In particular, we don't yet know the input file's color space, + * but we need to provide some value for jpeg_set_defaults() to work. + */ + + cinfo.in_color_space = JCS_RGB; /* arbitrary guess */ + jpeg_set_defaults(&cinfo); + + /* Scan command line to find file names. + * It is convenient to use just one switch-parsing routine, but the switch + * values read here are ignored; we will rescan the switches after opening + * the input file. + */ + + file_index = parse_switches(&cinfo, argc, argv, 0, FALSE); + +#ifdef TWO_FILE_COMMANDLINE + /* Must have either -outfile switch or explicit output file name */ + if (outfilename == NULL) { + if (file_index != argc-2) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + outfilename = argv[file_index+1]; + } else { + if (file_index != argc-1) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + } +#else + /* Unix style: expect zero or one file name */ + if (file_index < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } +#endif /* TWO_FILE_COMMANDLINE */ + + /* Open the input file. */ + if (file_index < argc) { + if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ + input_file = read_stdin(); + } + + /* Open the output file. */ + if (outfilename != NULL) { + if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, outfilename); + exit(EXIT_FAILURE); + } + } else { + /* default output file is stdout */ + output_file = write_stdout(); + } + +#ifdef PROGRESS_REPORT + start_progress_monitor((j_common_ptr) &cinfo, &progress); +#endif + + /* Figure out the input file format, and set up to read it. */ + src_mgr = select_file_type(&cinfo, input_file); + src_mgr->input_file = input_file; + + /* Read the input file header to obtain file size & colorspace. */ + (*src_mgr->start_input) (&cinfo, src_mgr); + + /* Now that we know input colorspace, fix colorspace-dependent defaults */ + jpeg_default_colorspace(&cinfo); + + /* Adjust default compression parameters by re-parsing the options */ + file_index = parse_switches(&cinfo, argc, argv, 0, TRUE); + + /* Specify data destination for compression */ + jpeg_stdio_dest(&cinfo, output_file); + + /* Start compressor */ + jpeg_start_compress(&cinfo, TRUE); + + /* Process data */ + while (cinfo.next_scanline < cinfo.image_height) { + num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr); + (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines); + } + + /* Finish compression and release memory */ + (*src_mgr->finish_input) (&cinfo, src_mgr); + jpeg_finish_compress(&cinfo); + jpeg_destroy_compress(&cinfo); + + /* Close files, if we opened them */ + if (input_file != stdin) + fclose(input_file); + if (output_file != stdout) + fclose(output_file); + +#ifdef PROGRESS_REPORT + end_progress_monitor((j_common_ptr) &cinfo); +#endif + + /* All done. */ + exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/src/SDL2/external/jpeg-9/ckconfig.c b/src/SDL2/external/jpeg-9/ckconfig.c new file mode 100644 index 000000000..e658623fa --- /dev/null +++ b/src/SDL2/external/jpeg-9/ckconfig.c @@ -0,0 +1,402 @@ +/* + * ckconfig.c + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + */ + +/* + * This program is intended to help you determine how to configure the JPEG + * software for installation on a particular system. The idea is to try to + * compile and execute this program. If your compiler fails to compile the + * program, make changes as indicated in the comments below. Once you can + * compile the program, run it, and it will produce a "jconfig.h" file for + * your system. + * + * As a general rule, each time you try to compile this program, + * pay attention only to the *first* error message you get from the compiler. + * Many C compilers will issue lots of spurious error messages once they + * have gotten confused. Go to the line indicated in the first error message, + * and read the comments preceding that line to see what to change. + * + * Almost all of the edits you may need to make to this program consist of + * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL", + * or vice versa. This is called defining or undefining that symbol. + */ + + +/* First we must see if your system has the include files we need. + * We start out with the assumption that your system has all the ANSI-standard + * include files. If you get any error trying to include one of these files, + * undefine the corresponding HAVE_xxx symbol. + */ + +#define HAVE_STDDEF_H /* replace 'define' by 'undef' if error here */ +#ifdef HAVE_STDDEF_H /* next line will be skipped if you undef... */ +#include +#endif + +#define HAVE_STDLIB_H /* same thing for stdlib.h */ +#ifdef HAVE_STDLIB_H +#include +#endif + +#include /* If you ain't got this, you ain't got C. */ + +/* We have to see if your string functions are defined by + * strings.h (old BSD convention) or string.h (everybody else). + * We try the non-BSD convention first; define NEED_BSD_STRINGS + * if the compiler says it can't find string.h. + */ + +#undef NEED_BSD_STRINGS + +#ifdef NEED_BSD_STRINGS +#include +#else +#include +#endif + +/* On some systems (especially older Unix machines), type size_t is + * defined only in the include file . If you get a failure + * on the size_t test below, try defining NEED_SYS_TYPES_H. + */ + +#undef NEED_SYS_TYPES_H /* start by assuming we don't need it */ +#ifdef NEED_SYS_TYPES_H +#include +#endif + + +/* Usually type size_t is defined in one of the include files we've included + * above. If not, you'll get an error on the "typedef size_t my_size_t;" line. + * In that case, first try defining NEED_SYS_TYPES_H just above. + * If that doesn't work, you'll have to search through your system library + * to figure out which include file defines "size_t". Look for a line that + * says "typedef something-or-other size_t;". Then, change the line below + * that says "#include " to instead include the file + * you found size_t in, and define NEED_SPECIAL_INCLUDE. If you can't find + * type size_t anywhere, try replacing "#include " with + * "typedef unsigned int size_t;". + */ + +#undef NEED_SPECIAL_INCLUDE /* assume we DON'T need it, for starters */ + +#ifdef NEED_SPECIAL_INCLUDE +#include +#endif + +typedef size_t my_size_t; /* The payoff: do we have size_t now? */ + + +/* The next question is whether your compiler supports ANSI-style function + * prototypes. You need to know this in order to choose between using + * makefile.ansi and using makefile.unix. + * The #define line below is set to assume you have ANSI function prototypes. + * If you get an error in this group of lines, undefine HAVE_PROTOTYPES. + */ + +#define HAVE_PROTOTYPES + +#ifdef HAVE_PROTOTYPES +int testfunction (int arg1, int * arg2); /* check prototypes */ + +struct methods_struct { /* check method-pointer declarations */ + int (*error_exit) (char *msgtext); + int (*trace_message) (char *msgtext); + int (*another_method) (void); +}; + +int testfunction (int arg1, int * arg2) /* check definitions */ +{ + return arg2[arg1]; +} + +int test2function (void) /* check void arg list */ +{ + return 0; +} +#endif + + +/* Now we want to find out if your compiler knows what "unsigned char" means. + * If you get an error on the "unsigned char un_char;" line, + * then undefine HAVE_UNSIGNED_CHAR. + */ + +#define HAVE_UNSIGNED_CHAR + +#ifdef HAVE_UNSIGNED_CHAR +unsigned char un_char; +#endif + + +/* Now we want to find out if your compiler knows what "unsigned short" means. + * If you get an error on the "unsigned short un_short;" line, + * then undefine HAVE_UNSIGNED_SHORT. + */ + +#define HAVE_UNSIGNED_SHORT + +#ifdef HAVE_UNSIGNED_SHORT +unsigned short un_short; +#endif + + +/* Now we want to find out if your compiler understands type "void". + * If you get an error anywhere in here, undefine HAVE_VOID. + */ + +#define HAVE_VOID + +#ifdef HAVE_VOID +/* Caution: a C++ compiler will insist on complete prototypes */ +typedef void * void_ptr; /* check void * */ +#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ +typedef void (*void_func) (int a, int b); +#else +typedef void (*void_func) (); +#endif + +#ifdef HAVE_PROTOTYPES /* check void function result */ +void test3function (void_ptr arg1, void_func arg2) +#else +void test3function (arg1, arg2) + void_ptr arg1; + void_func arg2; +#endif +{ + char * locptr = (char *) arg1; /* check casting to and from void * */ + arg1 = (void *) locptr; + (*arg2) (1, 2); /* check call of fcn returning void */ +} +#endif + + +/* Now we want to find out if your compiler knows what "const" means. + * If you get an error here, undefine HAVE_CONST. + */ + +#define HAVE_CONST + +#ifdef HAVE_CONST +static const int carray[3] = {1, 2, 3}; + +#ifdef HAVE_PROTOTYPES +int test4function (const int arg1) +#else +int test4function (arg1) + const int arg1; +#endif +{ + return carray[arg1]; +} +#endif + + +/* If you get an error or warning about this structure definition, + * define INCOMPLETE_TYPES_BROKEN. + */ + +#undef INCOMPLETE_TYPES_BROKEN + +#ifndef INCOMPLETE_TYPES_BROKEN +typedef struct undefined_structure * undef_struct_ptr; +#endif + + +/* If you get an error about duplicate names, + * define NEED_SHORT_EXTERNAL_NAMES. + */ + +#undef NEED_SHORT_EXTERNAL_NAMES + +#ifndef NEED_SHORT_EXTERNAL_NAMES + +int possibly_duplicate_function () +{ + return 0; +} + +int possibly_dupli_function () +{ + return 1; +} + +#endif + + + +/************************************************************************ + * OK, that's it. You should not have to change anything beyond this + * point in order to compile and execute this program. (You might get + * some warnings, but you can ignore them.) + * When you run the program, it will make a couple more tests that it + * can do automatically, and then it will create jconfig.h and print out + * any additional suggestions it has. + ************************************************************************ + */ + + +#ifdef HAVE_PROTOTYPES +int is_char_signed (int arg) +#else +int is_char_signed (arg) + int arg; +#endif +{ + if (arg == 189) { /* expected result for unsigned char */ + return 0; /* type char is unsigned */ + } + else if (arg != -67) { /* expected result for signed char */ + printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + } + return 1; /* assume char is signed otherwise */ +} + + +#ifdef HAVE_PROTOTYPES +int is_shifting_signed (long arg) +#else +int is_shifting_signed (arg) + long arg; +#endif +/* See whether right-shift on a long is signed or not. */ +{ + long res = arg >> 4; + + if (res == -0x7F7E80CL) { /* expected result for signed shift */ + return 1; /* right shift is signed */ + } + /* see if unsigned-shift hack will fix it. */ + /* we can't just test exact value since it depends on width of long... */ + res |= (~0L) << (32-4); + if (res == -0x7F7E80CL) { /* expected result now? */ + return 0; /* right shift is unsigned */ + } + printf("Right shift isn't acting as I expect it to.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + return 0; /* try it with unsigned anyway */ +} + + +#ifdef HAVE_PROTOTYPES +int main (int argc, char ** argv) +#else +int main (argc, argv) + int argc; + char ** argv; +#endif +{ + char signed_char_check = (char) (-67); + FILE *outfile; + + /* Attempt to write jconfig.h */ + if ((outfile = fopen("jconfig.h", "w")) == NULL) { + printf("Failed to write jconfig.h\n"); + return 1; + } + + /* Write out all the info */ + fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n"); + fprintf(outfile, "/* see jconfig.txt for explanations */\n\n"); +#ifdef HAVE_PROTOTYPES + fprintf(outfile, "#define HAVE_PROTOTYPES\n"); +#else + fprintf(outfile, "#undef HAVE_PROTOTYPES\n"); +#endif +#ifdef HAVE_UNSIGNED_CHAR + fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n"); +#else + fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n"); +#endif +#ifdef HAVE_UNSIGNED_SHORT + fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n"); +#else + fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n"); +#endif +#ifdef HAVE_VOID + fprintf(outfile, "/* #define void char */\n"); +#else + fprintf(outfile, "#define void char\n"); +#endif +#ifdef HAVE_CONST + fprintf(outfile, "/* #define const */\n"); +#else + fprintf(outfile, "#define const\n"); +#endif + if (is_char_signed((int) signed_char_check)) + fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n"); + else + fprintf(outfile, "#define CHAR_IS_UNSIGNED\n"); +#ifdef HAVE_STDDEF_H + fprintf(outfile, "#define HAVE_STDDEF_H\n"); +#else + fprintf(outfile, "#undef HAVE_STDDEF_H\n"); +#endif +#ifdef HAVE_STDLIB_H + fprintf(outfile, "#define HAVE_STDLIB_H\n"); +#else + fprintf(outfile, "#undef HAVE_STDLIB_H\n"); +#endif +#ifdef NEED_BSD_STRINGS + fprintf(outfile, "#define NEED_BSD_STRINGS\n"); +#else + fprintf(outfile, "#undef NEED_BSD_STRINGS\n"); +#endif +#ifdef NEED_SYS_TYPES_H + fprintf(outfile, "#define NEED_SYS_TYPES_H\n"); +#else + fprintf(outfile, "#undef NEED_SYS_TYPES_H\n"); +#endif + fprintf(outfile, "#undef NEED_FAR_POINTERS\n"); +#ifdef NEED_SHORT_EXTERNAL_NAMES + fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n"); +#else + fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n"); +#endif +#ifdef INCOMPLETE_TYPES_BROKEN + fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n"); +#else + fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n"); +#endif + fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n"); + if (is_shifting_signed(-0x7F7E80B1L)) + fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n"); + else + fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n"); + fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n"); + fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n"); + fprintf(outfile, "#define BMP_SUPPORTED /* BMP image file format */\n"); + fprintf(outfile, "#define GIF_SUPPORTED /* GIF image file format */\n"); + fprintf(outfile, "#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */\n"); + fprintf(outfile, "#undef RLE_SUPPORTED /* Utah RLE image file format */\n"); + fprintf(outfile, "#define TARGA_SUPPORTED /* Targa image file format */\n\n"); + fprintf(outfile, "#undef TWO_FILE_COMMANDLINE /* You may need this on non-Unix systems */\n"); + fprintf(outfile, "#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */\n"); + fprintf(outfile, "#undef DONT_USE_B_MODE\n"); + fprintf(outfile, "/* #define PROGRESS_REPORT */ /* optional */\n"); + fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n"); + + /* Close the jconfig.h file */ + fclose(outfile); + + /* User report */ + printf("Configuration check for Independent JPEG Group's software done.\n"); + printf("\nI have written the jconfig.h file for you.\n\n"); +#ifdef HAVE_PROTOTYPES + printf("You should use makefile.ansi as the starting point for your Makefile.\n"); +#else + printf("You should use makefile.unix as the starting point for your Makefile.\n"); +#endif + +#ifdef NEED_SPECIAL_INCLUDE + printf("\nYou'll need to change jconfig.h to include the system include file\n"); + printf("that you found type size_t in, or add a direct definition of type\n"); + printf("size_t if that's what you used. Just add it to the end.\n"); +#endif + + return 0; +} diff --git a/src/SDL2/external/jpeg-9/coderules.txt b/src/SDL2/external/jpeg-9/coderules.txt new file mode 100644 index 000000000..357929fb4 --- /dev/null +++ b/src/SDL2/external/jpeg-9/coderules.txt @@ -0,0 +1,118 @@ +IJG JPEG LIBRARY: CODING RULES + +Copyright (C) 1991-1996, Thomas G. Lane. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +Since numerous people will be contributing code and bug fixes, it's important +to establish a common coding style. The goal of using similar coding styles +is much more important than the details of just what that style is. + +In general we follow the recommendations of "Recommended C Style and Coding +Standards" revision 6.1 (Cannon et al. as modified by Spencer, Keppel and +Brader). This document is available in the IJG FTP archive (see +jpeg/doc/cstyle.ms.tbl.Z, or cstyle.txt.Z for those without nroff/tbl). + +Block comments should be laid out thusly: + +/* + * Block comments in this style. + */ + +We indent statements in K&R style, e.g., + if (test) { + then-part; + } else { + else-part; + } +with two spaces per indentation level. (This indentation convention is +handled automatically by GNU Emacs and many other text editors.) + +Multi-word names should be written in lower case with underscores, e.g., +multi_word_name (not multiWordName). Preprocessor symbols and enum constants +are similar but upper case (MULTI_WORD_NAME). Names should be unique within +the first fifteen characters. (On some older systems, global names must be +unique within six characters. We accommodate this without cluttering the +source code by using macros to substitute shorter names.) + +We use function prototypes everywhere; we rely on automatic source code +transformation to feed prototype-less C compilers. Transformation is done +by the simple and portable tool 'ansi2knr.c' (courtesy of Ghostscript). +ansi2knr is not very bright, so it imposes a format requirement on function +declarations: the function name MUST BEGIN IN COLUMN 1. Thus all functions +should be written in the following style: + +LOCAL(int *) +function_name (int a, char *b) +{ + code... +} + +Note that each function definition must begin with GLOBAL(type), LOCAL(type), +or METHODDEF(type). These macros expand to "static type" or just "type" as +appropriate. They provide a readable indication of the routine's usage and +can readily be changed for special needs. (For instance, special linkage +keywords can be inserted for use in Windows DLLs.) + +ansi2knr does not transform method declarations (function pointers in +structs). We handle these with a macro JMETHOD, defined as + #ifdef HAVE_PROTOTYPES + #define JMETHOD(type,methodname,arglist) type (*methodname) arglist + #else + #define JMETHOD(type,methodname,arglist) type (*methodname) () + #endif +which is used like this: + struct function_pointers { + JMETHOD(void, init_entropy_encoder, (int somearg, jparms *jp)); + JMETHOD(void, term_entropy_encoder, (void)); + }; +Note the set of parentheses surrounding the parameter list. + +A similar solution is used for forward and external function declarations +(see the EXTERN and JPP macros). + +If the code is to work on non-ANSI compilers, we cannot rely on a prototype +declaration to coerce actual parameters into the right types. Therefore, use +explicit casts on actual parameters whenever the actual parameter type is not +identical to the formal parameter. Beware of implicit conversions to "int". + +It seems there are some non-ANSI compilers in which the sizeof() operator +is defined to return int, yet size_t is defined as long. Needless to say, +this is brain-damaged. Always use the SIZEOF() macro in place of sizeof(), +so that the result is guaranteed to be of type size_t. + + +The JPEG library is intended to be used within larger programs. Furthermore, +we want it to be reentrant so that it can be used by applications that process +multiple images concurrently. The following rules support these requirements: + +1. Avoid direct use of file I/O, "malloc", error report printouts, etc; +pass these through the common routines provided. + +2. Minimize global namespace pollution. Functions should be declared static +wherever possible. (Note that our method-based calling conventions help this +a lot: in many modules only the initialization function will ever need to be +called directly, so only that function need be externally visible.) All +global function names should begin with "jpeg_", and should have an +abbreviated name (unique in the first six characters) substituted by macro +when NEED_SHORT_EXTERNAL_NAMES is set. + +3. Don't use global variables; anything that must be used in another module +should be in the common data structures. + +4. Don't use static variables except for read-only constant tables. Variables +that should be private to a module can be placed into private structures (see +the system architecture document, structure.txt). + +5. Source file names should begin with "j" for files that are part of the +library proper; source files that are not part of the library, such as cjpeg.c +and djpeg.c, do not begin with "j". Keep source file names to eight +characters (plus ".c" or ".h", etc) to make life easy for MS-DOSers. Keep +compression and decompression code in separate source files --- some +applications may want only one half of the library. + +Note: these rules (particularly #4) are not followed religiously in the +modules that are used in cjpeg/djpeg but are not part of the JPEG library +proper. Those modules are not really intended to be used in other +applications. diff --git a/src/SDL2/external/jpeg-9/config.guess b/src/SDL2/external/jpeg-9/config.guess new file mode 100755 index 000000000..1804e9fcd --- /dev/null +++ b/src/SDL2/external/jpeg-9/config.guess @@ -0,0 +1,1535 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012, 2013 Free Software Foundation, Inc. + +timestamp='2012-12-29' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). +# +# Originally written by Per Bothner. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD +# +# Please send patches with a ChangeLog entry to config-patches@gnu.org. + + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, +2012, 2013 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm*:riscos:*:*|arm*:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW64*:*) + echo ${UNAME_MACHINE}-pc-mingw64 + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + x86_64:Haiku:*:*) + echo x86_64-unknown-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-*:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; +esac + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/src/SDL2/external/jpeg-9/config.sub b/src/SDL2/external/jpeg-9/config.sub new file mode 100755 index 000000000..802a224de --- /dev/null +++ b/src/SDL2/external/jpeg-9/config.sub @@ -0,0 +1,1790 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012, 2013 Free Software Foundation, Inc. + +timestamp='2012-12-29' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). + + +# Please send patches with a ChangeLog entry to config-patches@gnu.org. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, +2012, 2013 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + android-linux) + os=-linux-android + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze*) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*178) + os=-lynxos178 + ;; + -lynx*5) + os=-lynxos5 + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | aarch64 | aarch64_be \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc \ + | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ + | avr | avr32 \ + | be32 | be64 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | epiphany \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | le32 | le64 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 \ + | ns16k | ns32k \ + | open8 \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pyramid \ + | rl78 | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | we32k \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip) + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | aarch64-* | aarch64_be-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | be32-* | be64-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | le32-* | le64-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | microblaze-* | microblazeel-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pyramid-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile*-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze*) + basic_machine=microblaze-xilinx + ;; + mingw64) + basic_machine=x86_64-pc + os=-mingw64 + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + msys) + basic_machine=i386-pc + os=-msys + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos | rdos64) + basic_machine=x86_64-pc + os=-rdos + ;; + rdos32) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tile*) + basic_machine=$basic_machine-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -bitrig* | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-musl* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + hexagon-*) + os=-elf + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/src/SDL2/external/jpeg-9/configure b/src/SDL2/external/jpeg-9/configure new file mode 100755 index 000000000..c7b13875e --- /dev/null +++ b/src/SDL2/external/jpeg-9/configure @@ -0,0 +1,15346 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for libjpeg 9.0.0. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +SHELL=${CONFIG_SHELL-/bin/sh} + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='libjpeg' +PACKAGE_TARNAME='libjpeg' +PACKAGE_VERSION='9.0.0' +PACKAGE_STRING='libjpeg 9.0.0' +PACKAGE_BUGREPORT='' +PACKAGE_URL='' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +JPEG_LIB_VERSION +MEMORYMGR +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +RANLIB +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +SED +LIBTOOL +OBJDUMP +DLLTOOL +AS +EGREP +GREP +HAVE_LD_VERSION_SCRIPT_FALSE +HAVE_LD_VERSION_SCRIPT_TRUE +ac_ct_AR +AR +LN_S +CPP +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_os +target_vendor +target_cpu +target +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_maintainer_mode +enable_dependency_tracking +enable_ld_version_script +enable_shared +enable_static +with_pic +enable_fast_install +with_gnu_ld +with_sysroot +enable_libtool_lock +enable_maxmem +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures libjpeg 9.0.0 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/libjpeg] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of libjpeg 9.0.0:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-maintainer-mode + enable make rules and dependencies not useful (and + sometimes confusing) to the casual installer + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --enable-ld-version-script + enable linker version script (default is enabled + when possible) + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --enable-maxmem=N enable use of temp files, set max mem usage to N MB + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot=DIR Search for dependent libraries within DIR + (or the compiler's sysroot if not specified). + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to the package provider. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +libjpeg configure 9.0.0 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libjpeg $as_me 9.0.0, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +# Directory where autotools helper scripts lives. +ac_aux_dir= +for ac_dir in . "$srcdir"/.; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in . \"$srcdir\"/." "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + +# Generate configuration headers. +ac_config_headers="$ac_config_headers jconfig.h:jconfig.cfg" + + +# Hack: disable autoheader so that it doesn't overwrite our cfg template. +AUTOHEADER="echo autoheader ignored" + +# Check system type +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5 +$as_echo_n "checking target system type... " >&6; } +if ${ac_cv_target+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$target_alias" = x; then + ac_cv_target=$ac_cv_host +else + ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5 +$as_echo "$ac_cv_target" >&6; } +case $ac_cv_target in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;; +esac +target=$ac_cv_target +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_target +shift +target_cpu=$1 +target_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +target_os=$* +IFS=$ac_save_IFS +case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + +# Initialize Automake +# Don't require all the GNU mandated files +am__api_version='1.13' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='libjpeg' + VERSION='9.0.0' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + + +# Make --enable-silent-rules the default. +# To get verbose build output you may configure +# with --disable-silent-rules or use "make V=1". +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=0;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + + +# Add configure option --enable-maintainer-mode which enables +# dependency checking and generation useful to package maintainers. +# This is made an option to avoid confusing end users. + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then : + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + +# Check for programs +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + case $ac_cv_prog_cc_stdc in #( + no) : + ac_cv_prog_cc_c99=no; ac_cv_prog_cc_c89=no ;; #( + *) : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5 +$as_echo_n "checking for $CC option to accept ISO C99... " >&6; } +if ${ac_cv_prog_cc_c99+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c99=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include +#include + +// Check varargs macros. These examples are taken from C99 6.10.3.5. +#define debug(...) fprintf (stderr, __VA_ARGS__) +#define showlist(...) puts (#__VA_ARGS__) +#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) +static void +test_varargs_macros (void) +{ + int x = 1234; + int y = 5678; + debug ("Flag"); + debug ("X = %d\n", x); + showlist (The first, second, and third items.); + report (x>y, "x is %d but y is %d", x, y); +} + +// Check long long types. +#define BIG64 18446744073709551615ull +#define BIG32 4294967295ul +#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) +#if !BIG_OK + your preprocessor is broken; +#endif +#if BIG_OK +#else + your preprocessor is broken; +#endif +static long long int bignum = -9223372036854775807LL; +static unsigned long long int ubignum = BIG64; + +struct incomplete_array +{ + int datasize; + double data[]; +}; + +struct named_init { + int number; + const wchar_t *name; + double average; +}; + +typedef const char *ccp; + +static inline int +test_restrict (ccp restrict text) +{ + // See if C++-style comments work. + // Iterate through items via the restricted pointer. + // Also check for declarations in for loops. + for (unsigned int i = 0; *(text+i) != '\0'; ++i) + continue; + return 0; +} + +// Check varargs and va_copy. +static void +test_varargs (const char *format, ...) +{ + va_list args; + va_start (args, format); + va_list args_copy; + va_copy (args_copy, args); + + const char *str; + int number; + float fnumber; + + while (*format) + { + switch (*format++) + { + case 's': // string + str = va_arg (args_copy, const char *); + break; + case 'd': // int + number = va_arg (args_copy, int); + break; + case 'f': // float + fnumber = va_arg (args_copy, double); + break; + default: + break; + } + } + va_end (args_copy); + va_end (args); +} + +int +main () +{ + + // Check bool. + _Bool success = false; + + // Check restrict. + if (test_restrict ("String literal") == 0) + success = true; + char *restrict newvar = "Another string"; + + // Check varargs. + test_varargs ("s, d' f .", "string", 65, 34.234); + test_varargs_macros (); + + // Check flexible array members. + struct incomplete_array *ia = + malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10)); + ia->datasize = 10; + for (int i = 0; i < ia->datasize; ++i) + ia->data[i] = i * 1.234; + + // Check named initializers. + struct named_init ni = { + .number = 34, + .name = L"Test wide string", + .average = 543.34343, + }; + + ni.number = 58; + + int dynamic_array[ni.number]; + dynamic_array[ni.number - 1] = 543; + + // work around unused variable warnings + return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x' + || dynamic_array[ni.number - 1] != 543); + + ; + return 0; +} +_ACEOF +for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -D_STDC_C99= -qlanglvl=extc99 +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c99=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c99" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c99" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c99" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 +$as_echo "$ac_cv_prog_cc_c99" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c99" != xno; then : + ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 +else + ac_cv_prog_cc_stdc=no +fi + +fi + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO Standard C" >&5 +$as_echo_n "checking for $CC option to accept ISO Standard C... " >&6; } + if ${ac_cv_prog_cc_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +fi + + case $ac_cv_prog_cc_stdc in #( + no) : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; #( + '') : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; #( + *) : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_stdc" >&5 +$as_echo "$ac_cv_prog_cc_stdc" >&6; } ;; +esac + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar lib "link -lib" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar lib "link -lib" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the archiver ($AR) interface" >&5 +$as_echo_n "checking the archiver ($AR) interface... " >&6; } +if ${am_cv_ar_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + am_cv_ar_interface=ar + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int some_variable = 0; +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5 + (eval $am_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + am_cv_ar_interface=ar + else + am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5 + (eval $am_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + am_cv_ar_interface=lib + else + am_cv_ar_interface=unknown + fi + fi + rm -f conftest.lib libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5 +$as_echo "$am_cv_ar_interface" >&6; } + +case $am_cv_ar_interface in +ar) + ;; +lib) + # Microsoft lib, so override with the ar-lib wrapper script. + # FIXME: It is wrong to rewrite AR. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__AR in this case, + # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something + # similar. + AR="$am_aux_dir/ar-lib $AR" + ;; +unknown) + as_fn_error $? "could not determine $AR interface" "$LINENO" 5 + ;; +esac + + +# Check if LD supports linker scripts, +# and define automake conditional HAVE_LD_VERSION_SCRIPT if so. +# Check whether --enable-ld-version-script was given. +if test "${enable_ld_version_script+set}" = set; then : + enableval=$enable_ld_version_script; have_ld_version_script=$enableval +fi + +if test -z "$have_ld_version_script"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if LD -Wl,--version-script works" >&5 +$as_echo_n "checking if LD -Wl,--version-script works... " >&6; } + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + cat > conftest.map <conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + have_ld_version_script=yes +else + have_ld_version_script=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + rm -f conftest.map + LDFLAGS="$save_LDFLAGS" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_ld_version_script" >&5 +$as_echo "$have_ld_version_script" >&6; } +fi + if test "$have_ld_version_script" = "yes"; then + HAVE_LD_VERSION_SCRIPT_TRUE= + HAVE_LD_VERSION_SCRIPT_FALSE='#' +else + HAVE_LD_VERSION_SCRIPT_TRUE='#' + HAVE_LD_VERSION_SCRIPT_FALSE= +fi + + +# See if compiler supports prototypes. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for function prototypes" >&5 +$as_echo_n "checking for function prototypes... " >&6; } +if ${ijg_cv_have_prototypes+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int testfunction (int arg1, int * arg2); /* check prototypes */ +struct methods_struct { /* check method-pointer declarations */ + int (*error_exit) (char *msgtext); + int (*trace_message) (char *msgtext); + int (*another_method) (void); +}; +int testfunction (int arg1, int * arg2) /* check definitions */ +{ return arg2[arg1]; } +int test2function (void) /* check void arg list */ +{ return 0; } + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_have_prototypes=yes +else + ijg_cv_have_prototypes=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_cv_have_prototypes" >&5 +$as_echo "$ijg_cv_have_prototypes" >&6; } +if test $ijg_cv_have_prototypes = yes; then + +$as_echo "#define HAVE_PROTOTYPES 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Your compiler does not seem to know about function prototypes. + Perhaps it needs a special switch to enable ANSI C mode. + If so, we recommend running configure like this: + ./configure CC='cc -switch' + where -switch is the proper switch." >&5 +$as_echo "$as_me: WARNING: Your compiler does not seem to know about function prototypes. + Perhaps it needs a special switch to enable ANSI C mode. + If so, we recommend running configure like this: + ./configure CC='cc -switch' + where -switch is the proper switch." >&2;} +fi + +# Check header files + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in stddef.h stdlib.h locale.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +ac_fn_c_check_header_mongrel "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default" +if test "x$ac_cv_header_string_h" = xyes; then : + +else + +$as_echo "#define NEED_BSD_STRINGS 1" >>confdefs.h + +fi + + + +# See whether type size_t is defined in any ANSI-standard places; +# if not, perhaps it is defined in . +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for size_t" >&5 +$as_echo_n "checking for size_t... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDDEF_H +#include +#endif +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef NEED_BSD_STRINGS +#include +#else +#include +#endif +typedef size_t my_size_t; + +int +main () +{ + my_size_t foovar; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_size_t_ok=yes +else + ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_size_t_ok" >&5 +$as_echo "$ijg_size_t_ok" >&6; } +if test "$ijg_size_t_ok" != yes; then + ac_fn_c_check_header_mongrel "$LINENO" "sys/types.h" "ac_cv_header_sys_types_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_types_h" = xyes; then : + +$as_echo "#define NEED_SYS_TYPES_H 1" >>confdefs.h + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "size_t" >/dev/null 2>&1; then : + ijg_size_t_ok="size_t is in sys/types.h" +else + ijg_size_t_ok=no +fi +rm -f conftest* + +else + ijg_size_t_ok=no +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_size_t_ok" >&5 +$as_echo "$ijg_size_t_ok" >&6; } + if test "$ijg_size_t_ok" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Type size_t is not defined in any of the usual places. + Try putting '\"typedef unsigned int size_t;\"' in jconfig.h." >&5 +$as_echo "$as_me: WARNING: Type size_t is not defined in any of the usual places. + Try putting '\"typedef unsigned int size_t;\"' in jconfig.h." >&2;} + fi +fi + +# Check compiler characteristics +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type unsigned char" >&5 +$as_echo_n "checking for type unsigned char... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + unsigned char un_char; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +$as_echo "#define HAVE_UNSIGNED_CHAR 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type unsigned short" >&5 +$as_echo_n "checking for type unsigned short... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + unsigned short un_short; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +$as_echo "#define HAVE_UNSIGNED_SHORT 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type void" >&5 +$as_echo_n "checking for type void... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Caution: a C++ compiler will insist on valid prototypes */ +typedef void * void_ptr; /* check void * */ +#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ +typedef void (*void_func) (int a, int b); +#else +typedef void (*void_func) (); +#endif + +#ifdef HAVE_PROTOTYPES /* check void function result */ +void test3function (void_ptr arg1, void_func arg2) +#else +void test3function (arg1, arg2) + void_ptr arg1; + void_func arg2; +#endif +{ + char * locptr = (char *) arg1; /* check casting to and from void * */ + arg1 = (void *) locptr; + (*arg2) (1, 2); /* check call of fcn returning void */ +} + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define void char" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if ${ac_cv_c_const+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + +#ifndef __cplusplus + /* Ultrix mips cc rejects this sort of thing. */ + typedef int charset[2]; + const charset cs = { 0, 0 }; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this sort of thing. */ + char tx; + char *t = &tx; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; } bx; + struct s *b = &bx; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes +else + ac_cv_c_const=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +$as_echo "#define const /**/" >>confdefs.h + +fi + + +# Check for non-broken inline under various spellings +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 +$as_echo_n "checking for inline... " >&6; } +ijg_cv_inline="" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +} __inline__ int foo() { return 0; } +int bar() { return foo(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_inline="__inline__" +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +} __inline int foo() { return 0; } +int bar() { return foo(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_inline="__inline" +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +} inline int foo() { return 0; } +int bar() { return foo(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_inline="inline" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_cv_inline" >&5 +$as_echo "$ijg_cv_inline" >&6; } + +cat >>confdefs.h <<_ACEOF +#define INLINE $ijg_cv_inline +_ACEOF + + +# We cannot check for bogus warnings, but at least we can check for errors +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for broken incomplete types" >&5 +$as_echo_n "checking for broken incomplete types... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + typedef struct undefined_structure * undef_struct_ptr; +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: broken" >&5 +$as_echo "broken" >&6; } + +$as_echo "#define INCOMPLETE_TYPES_BROKEN 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +# Test whether global names are unique to at least 15 chars +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for short external names" >&5 +$as_echo_n "checking for short external names... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int possibly_duplicate_function () { return 0; } +int possibly_dupli_function () { return 1; } + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: short" >&5 +$as_echo "short" >&6; } + +$as_echo "#define NEED_SHORT_EXTERNAL_NAMES 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +# Run-time checks +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if char is signed" >&5 +$as_echo_n "checking to see if char is signed... " >&6; } +if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Assuming that char is signed on target machine. + If it is unsigned, this will be a little bit inefficient." >&5 +$as_echo "$as_me: WARNING: Assuming that char is signed on target machine. + If it is unsigned, this will be a little bit inefficient." >&2;} + +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_char_signed (int arg) +#else +int is_char_signed (arg) + int arg; +#endif +{ + if (arg == 189) { /* expected result for unsigned char */ + return 0; /* type char is unsigned */ + } + else if (arg != -67) { /* expected result for signed char */ + printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + } + return 1; /* assume char is signed otherwise */ +} +char signed_char_check = (char) (-67); +int main() { + exit(is_char_signed((int) signed_char_check)); +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define CHAR_IS_UNSIGNED 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if right shift is signed" >&5 +$as_echo_n "checking to see if right shift is signed... " >&6; } +if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Assuming that right shift is signed on target machine." >&5 +$as_echo "Assuming that right shift is signed on target machine." >&6; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_shifting_signed (long arg) +#else +int is_shifting_signed (arg) + long arg; +#endif +/* See whether right-shift on a long is signed or not. */ +{ + long res = arg >> 4; + + if (res == -0x7F7E80CL) { /* expected result for signed shift */ + return 1; /* right shift is signed */ + } + /* see if unsigned-shift hack will fix it. */ + /* we can't just test exact value since it depends on width of long... */ + res |= (~0L) << (32-4); + if (res == -0x7F7E80CL) { /* expected result now? */ + return 0; /* right shift is unsigned */ + } + printf("Right shift isn't acting as I expect it to.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + return 0; /* try it with unsigned anyway */ +} +int main() { + exit(is_shifting_signed(-0x7F7E80B1L)); +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define RIGHT_SHIFT_IS_UNSIGNED 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if fopen accepts b spec" >&5 +$as_echo_n "checking to see if fopen accepts b spec... " >&6; } +if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Assuming that it does." >&5 +$as_echo "Assuming that it does." >&6; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDLIB_H +#include +#endif +#include +int main() { + if (fopen("conftestdata", "wb") != NULL) + exit(0); + exit(1); +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define DONT_USE_B_MODE 1" >>confdefs.h + +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +# Configure libtool +enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AS="${ac_tool_prefix}as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 +$as_echo "$AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AS="as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 +$as_echo "$ac_ct_AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + + ;; +esac + +test -z "$AS" && AS=as + + + + + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.4.2' +macro_revision='1.3337' + + + + + + + + + + + + + +ltmain="$ac_aux_dir/ltmain.sh" + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case "$ECHO" in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } + + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test "$GCC" != yes; then + reload_cmds=false + fi + ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} +: ${AR_FLAGS=cru} + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no +fi + + +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 +$as_echo "${with_sysroot}" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } + + + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi + +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + + + +# Set options + + + + enable_dlopen=no + + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + pic_mode=default +fi + + +test -z "$pic_mode" && pic_mode=default + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='${wl}--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test x"$lt_cv_prog_compiler__b" = xyes; then + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test "$lt_cv_irix_exported_symbol" = yes; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([A-Za-z]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report which library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + +# Select memory manager depending on user input. +# If no "-enable-maxmem", use jmemnobs +MEMORYMGR='jmemnobs' +MAXMEM="no" +# Check whether --enable-maxmem was given. +if test "${enable_maxmem+set}" = set; then : + enableval=$enable_maxmem; MAXMEM="$enableval" +fi + +if test "x$MAXMEM" = xyes; then + MAXMEM=1 +fi +if test "x$MAXMEM" != xno; then + if test -n "`echo $MAXMEM | sed 's/[0-9]//g'`"; then + as_fn_error $? "non-numeric argument to --enable-maxmem" "$LINENO" 5 + fi + DEFAULTMAXMEM=`expr $MAXMEM \* 1048576` + +cat >>confdefs.h <<_ACEOF +#define DEFAULT_MAX_MEM ${DEFAULTMAXMEM} +_ACEOF + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 'tmpfile()'" >&5 +$as_echo_n "checking for 'tmpfile()'... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ + FILE * tfile = tmpfile(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + MEMORYMGR='jmemansi' +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + MEMORYMGR='jmemname' + + # Test for the need to remove temporary files using a signal handler + # (for cjpeg/djpeg) + +$as_echo "#define NEED_SIGNAL_CATCHER 1" >>confdefs.h + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 'mktemp()'" >&5 +$as_echo_n "checking for 'mktemp()'... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + char fname[80]; mktemp(fname); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define NO_MKTEMP 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi + + +# Extract the library version IDs from jpeglib.h. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libjpeg version number" >&5 +$as_echo_n "checking libjpeg version number... " >&6; } +major=`sed -ne 's/^#define JPEG_LIB_VERSION_MAJOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` +minor=`sed -ne 's/^#define JPEG_LIB_VERSION_MINOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` +JPEG_LIB_VERSION=`expr $major + $minor`:0:$minor + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $JPEG_LIB_VERSION" >&5 +$as_echo "$JPEG_LIB_VERSION" >&6; } + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LD_VERSION_SCRIPT_TRUE}" && test -z "${HAVE_LD_VERSION_SCRIPT_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LD_VERSION_SCRIPT\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by libjpeg $as_me 9.0.0, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to the package provider." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +libjpeg config.status 9.0.0 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' +lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' +want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' +sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' +lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in AS \ +DLLTOOL \ +OBJDUMP \ +SHELL \ +ECHO \ +PATH_SEPARATOR \ +SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +deplibs_check_method \ +file_magic_cmd \ +file_magic_glob \ +want_nocaseglob \ +sharedlib_from_linklib_cmd \ +AR \ +AR_FLAGS \ +archiver_list_spec \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +nm_file_list_spec \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_pic \ +lt_prog_compiler_wl \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +MANIFEST_TOOL \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_separator \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' + + + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "jconfig.h") CONFIG_HEADERS="$CONFIG_HEADERS jconfig.h:jconfig.cfg" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) + + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="" + +# ### BEGIN LIBTOOL CONFIG + +# Assembler program. +AS=$lt_AS + +# DLL creation program. +DLLTOOL=$lt_DLLTOOL + +# Object dumper program. +OBJDUMP=$lt_OBJDUMP + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that protects backslashes. +ECHO=$lt_ECHO + +# The PATH separator for the build system. +PATH_SEPARATOR=$lt_PATH_SEPARATOR + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# convert \$build file names to \$host format. +to_host_file_cmd=$lt_cv_to_host_file_cmd + +# convert \$build files to toolchain format. +to_tool_file_cmd=$lt_cv_to_tool_file_cmd + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method = "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# How to find potential files when deplibs_check_method = "file_magic". +file_magic_glob=$lt_file_magic_glob + +# Find potential files using nocaseglob when deplibs_check_method = "file_magic". +want_nocaseglob=$lt_want_nocaseglob + +# Command to associate shared and link libraries. +sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd + +# The archiver. +AR=$lt_AR + +# Flags to create an archive. +AR_FLAGS=$lt_AR_FLAGS + +# How to feed a file listing to the archiver. +archiver_list_spec=$lt_archiver_list_spec + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# Specify filename containing input files for \$NM. +nm_file_list_spec=$lt_nm_file_list_spec + +# The root where to search for dependent libraries,and in which our libraries should be installed. +lt_sysroot=$lt_sysroot + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Manifest tool. +MANIFEST_TOOL=$lt_MANIFEST_TOOL + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + if test x"$xsi_shell" = xyes; then + sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ +func_dirname ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_basename ()$/,/^} # func_basename /c\ +func_basename ()\ +{\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ +func_dirname_and_basename ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ +func_stripname ()\ +{\ +\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ +\ # positional parameters, so assign one to ordinary parameter first.\ +\ func_stripname_result=${3}\ +\ func_stripname_result=${func_stripname_result#"${1}"}\ +\ func_stripname_result=${func_stripname_result%"${2}"}\ +} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ +func_split_long_opt ()\ +{\ +\ func_split_long_opt_name=${1%%=*}\ +\ func_split_long_opt_arg=${1#*=}\ +} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ +func_split_short_opt ()\ +{\ +\ func_split_short_opt_arg=${1#??}\ +\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ +} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ +func_lo2o ()\ +{\ +\ case ${1} in\ +\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ +\ *) func_lo2o_result=${1} ;;\ +\ esac\ +} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_xform ()$/,/^} # func_xform /c\ +func_xform ()\ +{\ + func_xform_result=${1%.*}.lo\ +} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_arith ()$/,/^} # func_arith /c\ +func_arith ()\ +{\ + func_arith_result=$(( $* ))\ +} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_len ()$/,/^} # func_len /c\ +func_len ()\ +{\ + func_len_result=${#1}\ +} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + +fi + +if test x"$lt_shell_append" = xyes; then + sed -e '/^func_append ()$/,/^} # func_append /c\ +func_append ()\ +{\ + eval "${1}+=\\${2}"\ +} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ +func_append_quoted ()\ +{\ +\ func_quote_for_eval "${2}"\ +\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ +} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 +$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} +fi + + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/src/SDL2/external/jpeg-9/configure.ac b/src/SDL2/external/jpeg-9/configure.ac new file mode 100644 index 000000000..e0cc36b78 --- /dev/null +++ b/src/SDL2/external/jpeg-9/configure.ac @@ -0,0 +1,365 @@ +# IJG auto-configuration source file. +# Process this file with autoconf to produce a configure script. + +# +# Configure script for IJG libjpeg +# + +AC_INIT([libjpeg], [9.0.0]) + +# Directory where autotools helper scripts lives. +AC_CONFIG_AUX_DIR([.]) + +# Generate configuration headers. +AC_CONFIG_HEADERS([jconfig.h:jconfig.cfg]) + +# Hack: disable autoheader so that it doesn't overwrite our cfg template. +AUTOHEADER="echo autoheader ignored" + +# Check system type +AC_CANONICAL_TARGET + +# Initialize Automake +# Don't require all the GNU mandated files +AM_INIT_AUTOMAKE([-Wall -Werror no-dist foreign]) + +# Make --enable-silent-rules the default. +# To get verbose build output you may configure +# with --disable-silent-rules or use "make V=1". +AM_SILENT_RULES([yes]) + +# Add configure option --enable-maintainer-mode which enables +# dependency checking and generation useful to package maintainers. +# This is made an option to avoid confusing end users. +AM_MAINTAINER_MODE + +# Check for programs +AC_PROG_CC +AC_PROG_CC_STDC +AC_PROG_CPP +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LN_S +AM_PROG_AR + +# Check if LD supports linker scripts, +# and define automake conditional HAVE_LD_VERSION_SCRIPT if so. +AC_ARG_ENABLE([ld-version-script], + AS_HELP_STRING([--enable-ld-version-script], + [enable linker version script (default is enabled when possible)]), + [have_ld_version_script=$enableval], []) +if test -z "$have_ld_version_script"; then + AC_MSG_CHECKING([if LD -Wl,--version-script works]) + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + cat > conftest.map < rather than standard .])]) + +# See whether type size_t is defined in any ANSI-standard places; +# if not, perhaps it is defined in . +AC_MSG_CHECKING([for size_t]) +AC_TRY_COMPILE([ +#ifdef HAVE_STDDEF_H +#include +#endif +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef NEED_BSD_STRINGS +#include +#else +#include +#endif +typedef size_t my_size_t; +], + [ my_size_t foovar; ], + [ijg_size_t_ok=yes], + [ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h"]) +AC_MSG_RESULT([$ijg_size_t_ok]) +if test "$ijg_size_t_ok" != yes; then + AC_CHECK_HEADER([sys/types.h], + [AC_DEFINE([NEED_SYS_TYPES_H], [1], + [Need to include in order to obtain size_t.]) + AC_EGREP_CPP([size_t], [#include ], + [ijg_size_t_ok="size_t is in sys/types.h"], + [ijg_size_t_ok=no])], + [ijg_size_t_ok=no]) + AC_MSG_RESULT([$ijg_size_t_ok]) + if test "$ijg_size_t_ok" = no; then + AC_MSG_WARN([Type size_t is not defined in any of the usual places. + Try putting '"typedef unsigned int size_t;"' in jconfig.h.]) + fi +fi + +# Check compiler characteristics +AC_MSG_CHECKING([for type unsigned char]) +AC_TRY_COMPILE([], [ unsigned char un_char; ], + [AC_MSG_RESULT(yes) + AC_DEFINE([HAVE_UNSIGNED_CHAR], [1], + [Compiler supports 'unsigned char'.])], + [AC_MSG_RESULT(no)]) + +AC_MSG_CHECKING([for type unsigned short]) +AC_TRY_COMPILE([], [ unsigned short un_short; ], + [AC_MSG_RESULT(yes) + AC_DEFINE([HAVE_UNSIGNED_SHORT], [1], + [Compiler supports 'unsigned short'.])], + [AC_MSG_RESULT(no)]) + +AC_MSG_CHECKING([for type void]) +AC_TRY_COMPILE([ +/* Caution: a C++ compiler will insist on valid prototypes */ +typedef void * void_ptr; /* check void * */ +#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ +typedef void (*void_func) (int a, int b); +#else +typedef void (*void_func) (); +#endif + +#ifdef HAVE_PROTOTYPES /* check void function result */ +void test3function (void_ptr arg1, void_func arg2) +#else +void test3function (arg1, arg2) + void_ptr arg1; + void_func arg2; +#endif +{ + char * locptr = (char *) arg1; /* check casting to and from void * */ + arg1 = (void *) locptr; + (*arg2) (1, 2); /* check call of fcn returning void */ +} +], [ ], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(no) + AC_DEFINE([void], [char], + [Define 'void' as 'char' for archaic compilers + that don't understand it.])]) +AC_C_CONST + +# Check for non-broken inline under various spellings +AC_MSG_CHECKING([for inline]) +ijg_cv_inline="" +AC_TRY_COMPILE([], [} __inline__ int foo() { return 0; } +int bar() { return foo();], ijg_cv_inline="__inline__", +[AC_TRY_COMPILE(, [} __inline int foo() { return 0; } +int bar() { return foo();], ijg_cv_inline="__inline", +[AC_TRY_COMPILE(, [} inline int foo() { return 0; } +int bar() { return foo();], ijg_cv_inline="inline")])]) +AC_MSG_RESULT($ijg_cv_inline) +AC_DEFINE_UNQUOTED([INLINE], [$ijg_cv_inline], + [How to obtain function inlining.]) + +# We cannot check for bogus warnings, but at least we can check for errors +AC_MSG_CHECKING([for broken incomplete types]) +AC_TRY_COMPILE([ typedef struct undefined_structure * undef_struct_ptr; ], + [], + [AC_MSG_RESULT(ok)], + [AC_MSG_RESULT(broken) + AC_DEFINE([INCOMPLETE_TYPES_BROKEN], [1], + [Compiler does not support pointers to unspecified + structures.])]) + +# Test whether global names are unique to at least 15 chars +AC_MSG_CHECKING([for short external names]) +AC_TRY_LINK([ +int possibly_duplicate_function () { return 0; } +int possibly_dupli_function () { return 1; } +], [], + [AC_MSG_RESULT(ok)], + [AC_MSG_RESULT(short) + AC_DEFINE([NEED_SHORT_EXTERNAL_NAMES], [1], + [Linker requires that global names be unique in + first 15 characters.])]) + +# Run-time checks +AC_MSG_CHECKING([to see if char is signed]) +AC_TRY_RUN([ +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_char_signed (int arg) +#else +int is_char_signed (arg) + int arg; +#endif +{ + if (arg == 189) { /* expected result for unsigned char */ + return 0; /* type char is unsigned */ + } + else if (arg != -67) { /* expected result for signed char */ + printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + } + return 1; /* assume char is signed otherwise */ +} +char signed_char_check = (char) (-67); +int main() { + exit(is_char_signed((int) signed_char_check)); +}], [AC_MSG_RESULT(no) + AC_DEFINE([CHAR_IS_UNSIGNED], [1], + [Characters are unsigned])], + [AC_MSG_RESULT(yes)], +[AC_MSG_WARN([Assuming that char is signed on target machine. + If it is unsigned, this will be a little bit inefficient.]) +]) + +AC_MSG_CHECKING([to see if right shift is signed]) +AC_TRY_RUN([ +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_shifting_signed (long arg) +#else +int is_shifting_signed (arg) + long arg; +#endif +/* See whether right-shift on a long is signed or not. */ +{ + long res = arg >> 4; + + if (res == -0x7F7E80CL) { /* expected result for signed shift */ + return 1; /* right shift is signed */ + } + /* see if unsigned-shift hack will fix it. */ + /* we can't just test exact value since it depends on width of long... */ + res |= (~0L) << (32-4); + if (res == -0x7F7E80CL) { /* expected result now? */ + return 0; /* right shift is unsigned */ + } + printf("Right shift isn't acting as I expect it to.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + return 0; /* try it with unsigned anyway */ +} +int main() { + exit(is_shifting_signed(-0x7F7E80B1L)); +}], + [AC_MSG_RESULT(no) + AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED], [1], + [Broken compiler shifts signed values as an unsigned shift.])], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(Assuming that right shift is signed on target machine.)]) + +AC_MSG_CHECKING([to see if fopen accepts b spec]) +AC_TRY_RUN([ +#ifdef HAVE_STDLIB_H +#include +#endif +#include +int main() { + if (fopen("conftestdata", "wb") != NULL) + exit(0); + exit(1); +}], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(no) + AC_DEFINE([DONT_USE_B_MODE], [1], + [Don't open files in binary mode.])], + [AC_MSG_RESULT(Assuming that it does.)]) + +# Configure libtool +AC_LIBTOOL_WIN32_DLL +AC_PROG_LIBTOOL + +# Select memory manager depending on user input. +# If no "-enable-maxmem", use jmemnobs +MEMORYMGR='jmemnobs' +MAXMEM="no" +AC_ARG_ENABLE([maxmem], +[ --enable-maxmem[=N] enable use of temp files, set max mem usage to N MB], +[MAXMEM="$enableval"]) +dnl [# support --with-maxmem for backwards compatibility with IJG V5.] +dnl AC_ARG_WITH(maxmem, , MAXMEM="$withval") +if test "x$MAXMEM" = xyes; then + MAXMEM=1 +fi +if test "x$MAXMEM" != xno; then + if test -n "`echo $MAXMEM | sed 's/[[0-9]]//g'`"; then + AC_MSG_ERROR(non-numeric argument to --enable-maxmem) + fi + DEFAULTMAXMEM=`expr $MAXMEM \* 1048576` + AC_DEFINE_UNQUOTED([DEFAULT_MAX_MEM], [${DEFAULTMAXMEM}], + [Maximum data space library will allocate.]) + AC_MSG_CHECKING([for 'tmpfile()']) + AC_TRY_LINK([#include ], [ FILE * tfile = tmpfile(); ], + [AC_MSG_RESULT(yes) + MEMORYMGR='jmemansi'], + [AC_MSG_RESULT(no) + dnl if tmpfile is not present, must use jmemname. + MEMORYMGR='jmemname' + + # Test for the need to remove temporary files using a signal handler + # (for cjpeg/djpeg) + AC_DEFINE([NEED_SIGNAL_CATCHER], [1], + [Need signal handler to clean up temporary files.]) + AC_MSG_CHECKING([for 'mktemp()']) + AC_TRY_LINK([], [ char fname[80]; mktemp(fname); ], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(no) + AC_DEFINE([NO_MKTEMP], [1], + [The mktemp() function is not available.])])]) +fi +AC_SUBST([MEMORYMGR]) + +# Extract the library version IDs from jpeglib.h. +AC_MSG_CHECKING([libjpeg version number]) +[major=`sed -ne 's/^#define JPEG_LIB_VERSION_MAJOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` +minor=`sed -ne 's/^#define JPEG_LIB_VERSION_MINOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h`] +AC_SUBST([JPEG_LIB_VERSION], + [`expr $major + $minor`:0:$minor]) +AC_MSG_RESULT([$JPEG_LIB_VERSION]) + +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/src/SDL2/external/jpeg-9/depcomp b/src/SDL2/external/jpeg-9/depcomp new file mode 100755 index 000000000..06b0882dd --- /dev/null +++ b/src/SDL2/external/jpeg-9/depcomp @@ -0,0 +1,790 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2012-10-18.11; # UTC + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputting dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +# Get the directory component of the given path, and save it in the +# global variables '$dir'. Note that this directory component will +# be either empty or ending with a '/' character. This is deliberate. +set_dir_from () +{ + case $1 in + */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; + *) dir=;; + esac +} + +# Get the suffix-stripped basename of the given path, and save it the +# global variable '$base'. +set_base_from () +{ + base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` +} + +# If no dependency file was actually created by the compiler invocation, +# we still have to create a dummy depfile, to avoid errors with the +# Makefile "include basename.Plo" scheme. +make_dummy_depfile () +{ + echo "#dummy" > "$depfile" +} + +# Factor out some common post-processing of the generated depfile. +# Requires the auxiliary global variable '$tmpdepfile' to be set. +aix_post_process_depfile () +{ + # If the compiler actually managed to produce a dependency file, + # post-process it. + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependency.h'. + # Do two passes, one to just change these to + # $object: dependency.h + # and one to simply output + # dependency.h: + # which is needed to avoid the deleted-header problem. + { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" + sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" + } > "$depfile" + rm -f "$tmpdepfile" + else + make_dummy_depfile + fi +} + +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' +# Character ranges might be problematic outside the C locale. +# These definitions help. +upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ +lower=abcdefghijklmnopqrstuvwxyz +digits=0123456789 +alpha=${upper}${lower} + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Avoid interferences from the environment. +gccflag= dashmflag= + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. + gccflag=-qmakedep=gcc,-MF + depmode=gcc +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. +## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. +## (see the conditional assignment to $gccflag above). +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). Also, it might not be +## supported by the other compilers which use the 'gcc' depmode. +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The second -e expression handles DOS-style file names with drive + # letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the "deleted header file" problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. +## Some versions of gcc put a space before the ':'. On the theory +## that the space means something, we add a space to the output as +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like '#:fec' to the end of the + # dependency line. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ + | tr "$nl" ' ' >> "$depfile" + echo >> "$depfile" + # The second pass generates a dummy entry for each header file. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + make_dummy_depfile + fi + rm -f "$tmpdepfile" + ;; + +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts '$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + set_dir_from "$object" + set_base_from "$object" + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + aix_post_process_depfile + ;; + +tcc) + # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 + # FIXME: That version still under development at the moment of writing. + # Make that this statement remains true also for stable, released + # versions. + # It will wrap lines (doesn't matter whether long or short) with a + # trailing '\', as in: + # + # foo.o : \ + # foo.c \ + # foo.h \ + # + # It will put a trailing '\' even on the last line, and will use leading + # spaces rather than leading tabs (at least since its commit 0394caf7 + # "Emit spaces for -MD"). + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. + # We have to change lines of the first kind to '$object: \'. + sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" + # And for each line of the second kind, we have to emit a 'dep.h:' + # dummy dependency, to avoid the deleted-header problem. + sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + +## The order of this option in the case statement is important, since the +## shell code in configure will try each of these formats in the order +## listed in this file. A plain '-MD' option would be understood by many +## compilers, so we must ensure this comes after the gcc and icc options. +pgcc) + # Portland's C compiler understands '-MD'. + # Will always output deps to 'file.d' where file is the root name of the + # source file under compilation, even if file resides in a subdirectory. + # The object file name does not affect the name of the '.d' file. + # pgcc 10.2 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using '\' : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + set_dir_from "$object" + # Use the source, not the object, to determine the base name, since + # that's sadly what pgcc will do too. + set_base_from "$source" + tmpdepfile=$base.d + + # For projects that build the same source file twice into different object + # files, the pgcc approach of using the *source* file root name can cause + # problems in parallel builds. Use a locking strategy to avoid stomping on + # the same $tmpdepfile. + lockdir=$base.d-lock + trap " + echo '$0: caught signal, cleaning up...' >&2 + rmdir '$lockdir' + exit 1 + " 1 2 13 15 + numtries=100 + i=$numtries + while test $i -gt 0; do + # mkdir is a portable test-and-set. + if mkdir "$lockdir" 2>/dev/null; then + # This process acquired the lock. + "$@" -MD + stat=$? + # Release the lock. + rmdir "$lockdir" + break + else + # If the lock is being held by a different process, wait + # until the winning process is done or we timeout. + while test -d "$lockdir" && test $i -gt 0; do + sleep 1 + i=`expr $i - 1` + done + fi + i=`expr $i - 1` + done + trap - 1 2 13 15 + if test $i -le 0; then + echo "$0: failed to acquire lock after $numtries attempts" >&2 + echo "$0: check lockdir '$lockdir'" >&2 + exit 1 + fi + + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + set_dir_from "$object" + set_base_from "$object" + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + make_dummy_depfile + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + set_dir_from "$object" + set_base_from "$object" + + if test "$libtool" = yes; then + # Libtool generates 2 separate objects for the 2 libraries. These + # two compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir$base.o.d # libtool 1.5 + tmpdepfile2=$dir.libs/$base.o.d # Likewise. + tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + # Same post-processing that is required for AIX mode. + aix_post_process_depfile + ;; + +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for ':' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. + "$@" $dashmflag | + sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this sed invocation + # correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process the last invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed '1,2d' "$tmpdepfile" \ + | tr ' ' "$nl" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E \ + | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + | sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/src/SDL2/external/jpeg-9/djpeg.1 b/src/SDL2/external/jpeg-9/djpeg.1 new file mode 100644 index 000000000..f3722d150 --- /dev/null +++ b/src/SDL2/external/jpeg-9/djpeg.1 @@ -0,0 +1,252 @@ +.TH DJPEG 1 "3 October 2009" +.SH NAME +djpeg \- decompress a JPEG file to an image file +.SH SYNOPSIS +.B djpeg +[ +.I options +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B djpeg +decompresses the named JPEG file, or the standard input if no file is named, +and produces an image file on the standard output. PBMPLUS (PPM/PGM), BMP, +GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected. +(RLE is supported only if the URT library is available.) +.SH OPTIONS +All switch names may be abbreviated; for example, +.B \-grayscale +may be written +.B \-gray +or +.BR \-gr . +Most of the "basic" switches can be abbreviated to as little as one letter. +Upper and lower case are equivalent (thus +.B \-BMP +is the same as +.BR \-bmp ). +British spellings are also accepted (e.g., +.BR \-greyscale ), +though for brevity these are not mentioned below. +.PP +The basic switches are: +.TP +.BI \-colors " N" +Reduce image to at most N colors. This reduces the number of colors used in +the output image, so that it can be displayed on a colormapped display or +stored in a colormapped file format. For example, if you have an 8-bit +display, you'd need to reduce to 256 or fewer colors. +.TP +.BI \-quantize " N" +Same as +.BR \-colors . +.B \-colors +is the recommended name, +.B \-quantize +is provided only for backwards compatibility. +.TP +.B \-fast +Select recommended processing options for fast, low quality output. (The +default options are chosen for highest quality output.) Currently, this is +equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR. +.TP +.B \-grayscale +Force gray-scale output even if JPEG file is color. Useful for viewing on +monochrome displays; also, +.B djpeg +runs noticeably faster in this mode. +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. Currently supported scale factors are +M/N with all M from 1 to 16, where N is the source DCT size, which is 8 for +baseline JPEG. If the /N part is omitted, then M specifies the DCT scaled +size to be applied on the given input. For baseline JPEG this is equivalent +to M/8 scaling, since the source DCT size for baseline JPEG is 8. +Scaling is handy if the image is larger than your screen; also, +.B djpeg +runs much faster when scaling down the output. +.TP +.B \-bmp +Select BMP output format (Windows flavor). 8-bit colormapped format is +emitted if +.B \-colors +or +.B \-grayscale +is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color +format is emitted. +.TP +.B \-gif +Select GIF output format. Since GIF does not support more than 256 colors, +.B \-colors 256 +is assumed (unless you specify a smaller number of colors). +.TP +.B \-os2 +Select BMP output format (OS/2 1.x flavor). 8-bit colormapped format is +emitted if +.B \-colors +or +.B \-grayscale +is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color +format is emitted. +.TP +.B \-pnm +Select PBMPLUS (PPM/PGM) output format (this is the default format). +PGM is emitted if the JPEG file is gray-scale or if +.B \-grayscale +is specified; otherwise PPM is emitted. +.TP +.B \-rle +Select RLE output format. (Requires URT library.) +.TP +.B \-targa +Select Targa output format. Gray-scale format is emitted if the JPEG file is +gray-scale or if +.B \-grayscale +is specified; otherwise, colormapped format is emitted if +.B \-colors +is specified; otherwise, 24-bit full-color format is emitted. +.PP +Switches for advanced users: +.TP +.B \-dct int +Use integer DCT method (default). +.TP +.B \-dct fast +Use fast integer DCT (less accurate). +.TP +.B \-dct float +Use floating-point DCT method. +The float method is very slightly more accurate than the int method, but is +much slower unless your machine has very fast floating-point hardware. Also +note that results of the floating-point method may vary slightly across +machines, while the integer methods should give the same results everywhere. +The fast integer method is much less accurate than the other two. +.TP +.B \-dither fs +Use Floyd-Steinberg dithering in color quantization. +.TP +.B \-dither ordered +Use ordered dithering in color quantization. +.TP +.B \-dither none +Do not use dithering in color quantization. +By default, Floyd-Steinberg dithering is applied when quantizing colors; this +is slow but usually produces the best results. Ordered dither is a compromise +between speed and quality; no dithering is fast but usually looks awful. Note +that these switches have no effect unless color quantization is being done. +Ordered dither is only available in +.B \-onepass +mode. +.TP +.BI \-map " file" +Quantize to the colors used in the specified image file. This is useful for +producing multiple files with identical color maps, or for forcing a +predefined set of colors to be used. The +.I file +must be a GIF or PPM file. This option overrides +.B \-colors +and +.BR \-onepass . +.TP +.B \-nosmooth +Don't use high-quality upsampling. +.TP +.B \-onepass +Use one-pass instead of two-pass color quantization. The one-pass method is +faster and needs less memory, but it produces a lower-quality image. +.B \-onepass +is ignored unless you also say +.B \-colors +.IR N . +Also, the one-pass method is always used for gray-scale output (the two-pass +method is no improvement then). +.TP +.BI \-maxmemory " N" +Set limit for amount of memory to use in processing large images. Value is +in thousands of bytes, or millions of bytes if "M" is attached to the +number. For example, +.B \-max 4m +selects 4000000 bytes. If more space is needed, temporary files will be used. +.TP +.BI \-outfile " name" +Send output image to the named file, not to standard output. +.TP +.B \-verbose +Enable debug printout. More +.BR \-v 's +give more output. Also, version information is printed at startup. +.TP +.B \-debug +Same as +.BR \-verbose . +.SH EXAMPLES +.LP +This example decompresses the JPEG file foo.jpg, quantizes it to +256 colors, and saves the output in 8-bit BMP format in foo.bmp: +.IP +.B djpeg \-colors 256 \-bmp +.I foo.jpg +.B > +.I foo.bmp +.SH HINTS +To get a quick preview of an image, use the +.B \-grayscale +and/or +.B \-scale +switches. +.B \-grayscale \-scale 1/8 +is the fastest case. +.PP +Several options are available that trade off image quality to gain speed. +.B \-fast +turns on the recommended settings. +.PP +.B \-dct fast +and/or +.B \-nosmooth +gain speed at a small sacrifice in quality. +When producing a color-quantized image, +.B \-onepass \-dither ordered +is fast but much lower quality than the default behavior. +.B \-dither none +may give acceptable results in two-pass mode, but is seldom tolerable in +one-pass mode. +.PP +If you are fortunate enough to have very fast floating point hardware, +\fB\-dct float\fR may be even faster than \fB\-dct fast\fR. But on most +machines \fB\-dct float\fR is slower than \fB\-dct int\fR; in this case it is +not worth using, because its theoretical accuracy advantage is too small to be +significant in practice. +.SH ENVIRONMENT +.TP +.B JPEGMEM +If this environment variable is set, its value is the default memory limit. +The value is specified as described for the +.B \-maxmemory +switch. +.B JPEGMEM +overrides the default value specified when the program was compiled, and +itself is overridden by an explicit +.BR \-maxmemory . +.SH SEE ALSO +.BR cjpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1), +.BR wrjpgcom (1) +.br +.BR ppm (5), +.BR pgm (5) +.br +Wallace, Gregory K. "The JPEG Still Picture Compression Standard", +Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. +.SH AUTHOR +Independent JPEG Group +.SH BUGS +To avoid the Unisys LZW patent, +.B djpeg +produces uncompressed GIF files. These are larger than they should be, but +are readable by standard GIF decoders. diff --git a/src/SDL2/external/jpeg-9/djpeg.c b/src/SDL2/external/jpeg-9/djpeg.c new file mode 100644 index 000000000..be7f2690e --- /dev/null +++ b/src/SDL2/external/jpeg-9/djpeg.c @@ -0,0 +1,617 @@ +/* + * djpeg.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2009-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a command-line user interface for the JPEG decompressor. + * It should work on any system with Unix- or MS-DOS-style command lines. + * + * Two different command line styles are permitted, depending on the + * compile-time switch TWO_FILE_COMMANDLINE: + * djpeg [options] inputfile outputfile + * djpeg [options] [inputfile] + * In the second style, output is always to standard output, which you'd + * normally redirect to a file or pipe to some other program. Input is + * either from a named file or from standard input (typically redirected). + * The second style is convenient on Unix but is unhelpful on systems that + * don't support pipes. Also, you MUST use the first style if your system + * doesn't do binary I/O to stdin/stdout. + * To simplify script writing, the "-outfile" switch is provided. The syntax + * djpeg [options] -outfile outputfile inputfile + * works regardless of which command line style is used. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include "jversion.h" /* for version message */ + +#include /* to declare isprint() */ + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + + +/* Create the add-on message string table. */ + +#define JMESSAGE(code,string) string , + +static const char * const cdjpeg_message_table[] = { +#include "cderror.h" + NULL +}; + + +/* + * This list defines the known output image formats + * (not all of which need be supported by a given version). + * You can change the default output format by defining DEFAULT_FMT; + * indeed, you had better do so if you undefine PPM_SUPPORTED. + */ + +typedef enum { + FMT_BMP, /* BMP format (Windows flavor) */ + FMT_GIF, /* GIF format */ + FMT_OS2, /* BMP format (OS/2 flavor) */ + FMT_PPM, /* PPM/PGM (PBMPLUS formats) */ + FMT_RLE, /* RLE format */ + FMT_TARGA, /* Targa format */ + FMT_TIFF /* TIFF format */ +} IMAGE_FORMATS; + +#ifndef DEFAULT_FMT /* so can override from CFLAGS in Makefile */ +#define DEFAULT_FMT FMT_PPM +#endif + +static IMAGE_FORMATS requested_fmt; + + +/* + * Argument-parsing code. + * The switch parser is designed to be useful with DOS-style command line + * syntax, ie, intermixed switches and file names, where only the switches + * to the left of a given file name affect processing of that file. + * The main program in this file doesn't actually use this capability... + */ + + +static const char * progname; /* program name for error messages */ +static char * outfilename; /* for -outfile switch */ + + +LOCAL(void) +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "usage: %s [switches] ", progname); +#ifdef TWO_FILE_COMMANDLINE + fprintf(stderr, "inputfile outputfile\n"); +#else + fprintf(stderr, "[inputfile]\n"); +#endif + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -colors N Reduce image to no more than N colors\n"); + fprintf(stderr, " -fast Fast, low-quality processing\n"); + fprintf(stderr, " -grayscale Force grayscale output\n"); +#ifdef IDCT_SCALING_SUPPORTED + fprintf(stderr, " -scale M/N Scale output image by fraction M/N, eg, 1/8\n"); +#endif +#ifdef BMP_SUPPORTED + fprintf(stderr, " -bmp Select BMP output format (Windows style)%s\n", + (DEFAULT_FMT == FMT_BMP ? " (default)" : "")); +#endif +#ifdef GIF_SUPPORTED + fprintf(stderr, " -gif Select GIF output format%s\n", + (DEFAULT_FMT == FMT_GIF ? " (default)" : "")); +#endif +#ifdef BMP_SUPPORTED + fprintf(stderr, " -os2 Select BMP output format (OS/2 style)%s\n", + (DEFAULT_FMT == FMT_OS2 ? " (default)" : "")); +#endif +#ifdef PPM_SUPPORTED + fprintf(stderr, " -pnm Select PBMPLUS (PPM/PGM) output format%s\n", + (DEFAULT_FMT == FMT_PPM ? " (default)" : "")); +#endif +#ifdef RLE_SUPPORTED + fprintf(stderr, " -rle Select Utah RLE output format%s\n", + (DEFAULT_FMT == FMT_RLE ? " (default)" : "")); +#endif +#ifdef TARGA_SUPPORTED + fprintf(stderr, " -targa Select Targa output format%s\n", + (DEFAULT_FMT == FMT_TARGA ? " (default)" : "")); +#endif + fprintf(stderr, "Switches for advanced users:\n"); +#ifdef DCT_ISLOW_SUPPORTED + fprintf(stderr, " -dct int Use integer DCT method%s\n", + (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : "")); +#endif +#ifdef DCT_IFAST_SUPPORTED + fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n", + (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : "")); +#endif +#ifdef DCT_FLOAT_SUPPORTED + fprintf(stderr, " -dct float Use floating-point DCT method%s\n", + (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : "")); +#endif + fprintf(stderr, " -dither fs Use F-S dithering (default)\n"); + fprintf(stderr, " -dither none Don't use dithering in quantization\n"); + fprintf(stderr, " -dither ordered Use ordered dither (medium speed, quality)\n"); +#ifdef QUANT_2PASS_SUPPORTED + fprintf(stderr, " -map FILE Map to colors used in named image file\n"); +#endif + fprintf(stderr, " -nosmooth Don't use high-quality upsampling\n"); +#ifdef QUANT_1PASS_SUPPORTED + fprintf(stderr, " -onepass Use 1-pass quantization (fast, low quality)\n"); +#endif + fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); + fprintf(stderr, " -outfile name Specify name for output file\n"); + fprintf(stderr, " -verbose or -debug Emit debug output\n"); + exit(EXIT_FAILURE); +} + + +LOCAL(int) +parse_switches (j_decompress_ptr cinfo, int argc, char **argv, + int last_file_arg_seen, boolean for_real) +/* Parse optional switches. + * Returns argv[] index of first file-name argument (== argc if none). + * Any file names with indexes <= last_file_arg_seen are ignored; + * they have presumably been processed in a previous iteration. + * (Pass 0 for last_file_arg_seen on the first or only iteration.) + * for_real is FALSE on the first (dummy) pass; we may skip any expensive + * processing. + */ +{ + int argn; + char * arg; + + /* Set up default JPEG parameters. */ + requested_fmt = DEFAULT_FMT; /* set default output file format */ + outfilename = NULL; + cinfo->err->trace_level = 0; + + /* Scan command line options, adjust parameters */ + + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (*arg != '-') { + /* Not a switch, must be a file name argument */ + if (argn <= last_file_arg_seen) { + outfilename = NULL; /* -outfile applies to just one input file */ + continue; /* ignore this name if previously processed */ + } + break; /* else done parsing switches */ + } + arg++; /* advance past switch marker character */ + + if (keymatch(arg, "bmp", 1)) { + /* BMP output format. */ + requested_fmt = FMT_BMP; + + } else if (keymatch(arg, "colors", 1) || keymatch(arg, "colours", 1) || + keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) { + /* Do color quantization. */ + int val; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%d", &val) != 1) + usage(); + cinfo->desired_number_of_colors = val; + cinfo->quantize_colors = TRUE; + + } else if (keymatch(arg, "dct", 2)) { + /* Select IDCT algorithm. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "int", 1)) { + cinfo->dct_method = JDCT_ISLOW; + } else if (keymatch(argv[argn], "fast", 2)) { + cinfo->dct_method = JDCT_IFAST; + } else if (keymatch(argv[argn], "float", 2)) { + cinfo->dct_method = JDCT_FLOAT; + } else + usage(); + + } else if (keymatch(arg, "dither", 2)) { + /* Select dithering algorithm. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "fs", 2)) { + cinfo->dither_mode = JDITHER_FS; + } else if (keymatch(argv[argn], "none", 2)) { + cinfo->dither_mode = JDITHER_NONE; + } else if (keymatch(argv[argn], "ordered", 2)) { + cinfo->dither_mode = JDITHER_ORDERED; + } else + usage(); + + } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { + /* Enable debug printouts. */ + /* On first -d, print version identification */ + static boolean printed_version = FALSE; + + if (! printed_version) { + fprintf(stderr, "Independent JPEG Group's DJPEG, version %s\n%s\n", + JVERSION, JCOPYRIGHT); + printed_version = TRUE; + } + cinfo->err->trace_level++; + + } else if (keymatch(arg, "fast", 1)) { + /* Select recommended processing options for quick-and-dirty output. */ + cinfo->two_pass_quantize = FALSE; + cinfo->dither_mode = JDITHER_ORDERED; + if (! cinfo->quantize_colors) /* don't override an earlier -colors */ + cinfo->desired_number_of_colors = 216; + cinfo->dct_method = JDCT_FASTEST; + cinfo->do_fancy_upsampling = FALSE; + + } else if (keymatch(arg, "gif", 1)) { + /* GIF output format. */ + requested_fmt = FMT_GIF; + + } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) { + /* Force monochrome output. */ + cinfo->out_color_space = JCS_GRAYSCALE; + + } else if (keymatch(arg, "map", 3)) { + /* Quantize to a color map taken from an input file. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (for_real) { /* too expensive to do twice! */ +#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */ + FILE * mapfile; + + if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + read_color_map(cinfo, mapfile); + fclose(mapfile); + cinfo->quantize_colors = TRUE; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + + } else if (keymatch(arg, "maxmemory", 3)) { + /* Maximum memory in Kb (or Mb with 'm'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (ch == 'm' || ch == 'M') + lval *= 1000L; + cinfo->mem->max_memory_to_use = lval * 1000L; + + } else if (keymatch(arg, "nosmooth", 3)) { + /* Suppress fancy upsampling. */ + cinfo->do_fancy_upsampling = FALSE; + + } else if (keymatch(arg, "onepass", 3)) { + /* Use fast one-pass quantization. */ + cinfo->two_pass_quantize = FALSE; + + } else if (keymatch(arg, "os2", 3)) { + /* BMP output format (OS/2 flavor). */ + requested_fmt = FMT_OS2; + + } else if (keymatch(arg, "outfile", 4)) { + /* Set output file name. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + outfilename = argv[argn]; /* save it away for later use */ + + } else if (keymatch(arg, "pnm", 1) || keymatch(arg, "ppm", 1)) { + /* PPM/PGM output format. */ + requested_fmt = FMT_PPM; + + } else if (keymatch(arg, "rle", 1)) { + /* RLE output format. */ + requested_fmt = FMT_RLE; + + } else if (keymatch(arg, "scale", 1)) { + /* Scale the output image by a fraction M/N. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%u/%u", + &cinfo->scale_num, &cinfo->scale_denom) < 1) + usage(); + + } else if (keymatch(arg, "targa", 1)) { + /* Targa output format. */ + requested_fmt = FMT_TARGA; + + } else { + usage(); /* bogus switch */ + } + } + + return argn; /* return index of next arg (file name) */ +} + + +/* + * Marker processor for COM and interesting APPn markers. + * This replaces the library's built-in processor, which just skips the marker. + * We want to print out the marker as text, to the extent possible. + * Note this code relies on a non-suspending data source. + */ + +LOCAL(unsigned int) +jpeg_getc (j_decompress_ptr cinfo) +/* Read next byte */ +{ + struct jpeg_source_mgr * datasrc = cinfo->src; + + if (datasrc->bytes_in_buffer == 0) { + if (! (*datasrc->fill_input_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + } + datasrc->bytes_in_buffer--; + return GETJOCTET(*datasrc->next_input_byte++); +} + + +METHODDEF(boolean) +print_text_marker (j_decompress_ptr cinfo) +{ + boolean traceit = (cinfo->err->trace_level >= 1); + INT32 length; + unsigned int ch; + unsigned int lastch = 0; + + length = jpeg_getc(cinfo) << 8; + length += jpeg_getc(cinfo); + length -= 2; /* discount the length word itself */ + + if (traceit) { + if (cinfo->unread_marker == JPEG_COM) + fprintf(stderr, "Comment, length %ld:\n", (long) length); + else /* assume it is an APPn otherwise */ + fprintf(stderr, "APP%d, length %ld:\n", + cinfo->unread_marker - JPEG_APP0, (long) length); + } + + while (--length >= 0) { + ch = jpeg_getc(cinfo); + if (traceit) { + /* Emit the character in a readable form. + * Nonprintables are converted to \nnn form, + * while \ is converted to \\. + * Newlines in CR, CR/LF, or LF form will be printed as one newline. + */ + if (ch == '\r') { + fprintf(stderr, "\n"); + } else if (ch == '\n') { + if (lastch != '\r') + fprintf(stderr, "\n"); + } else if (ch == '\\') { + fprintf(stderr, "\\\\"); + } else if (isprint(ch)) { + putc(ch, stderr); + } else { + fprintf(stderr, "\\%03o", ch); + } + lastch = ch; + } + } + + if (traceit) + fprintf(stderr, "\n"); + + return TRUE; +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + struct jpeg_decompress_struct cinfo; + struct jpeg_error_mgr jerr; +#ifdef PROGRESS_REPORT + struct cdjpeg_progress_mgr progress; +#endif + int file_index; + djpeg_dest_ptr dest_mgr = NULL; + FILE * input_file; + FILE * output_file; + JDIMENSION num_scanlines; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "djpeg"; /* in case C library doesn't provide it */ + + /* Initialize the JPEG decompression object with default error handling. */ + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_decompress(&cinfo); + /* Add some application-specific error messages (from cderror.h) */ + jerr.addon_message_table = cdjpeg_message_table; + jerr.first_addon_message = JMSG_FIRSTADDONCODE; + jerr.last_addon_message = JMSG_LASTADDONCODE; + + /* Insert custom marker processor for COM and APP12. + * APP12 is used by some digital camera makers for textual info, + * so we provide the ability to display it as text. + * If you like, additional APPn marker types can be selected for display, + * but don't try to override APP0 or APP14 this way (see libjpeg.doc). + */ + jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker); + jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker); + + /* Now safe to enable signal catcher. */ +#ifdef NEED_SIGNAL_CATCHER + enable_signal_catcher((j_common_ptr) &cinfo); +#endif + + /* Scan command line to find file names. */ + /* It is convenient to use just one switch-parsing routine, but the switch + * values read here are ignored; we will rescan the switches after opening + * the input file. + * (Exception: tracing level set here controls verbosity for COM markers + * found during jpeg_read_header...) + */ + + file_index = parse_switches(&cinfo, argc, argv, 0, FALSE); + +#ifdef TWO_FILE_COMMANDLINE + /* Must have either -outfile switch or explicit output file name */ + if (outfilename == NULL) { + if (file_index != argc-2) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + outfilename = argv[file_index+1]; + } else { + if (file_index != argc-1) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + } +#else + /* Unix style: expect zero or one file name */ + if (file_index < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } +#endif /* TWO_FILE_COMMANDLINE */ + + /* Open the input file. */ + if (file_index < argc) { + if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ + input_file = read_stdin(); + } + + /* Open the output file. */ + if (outfilename != NULL) { + if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, outfilename); + exit(EXIT_FAILURE); + } + } else { + /* default output file is stdout */ + output_file = write_stdout(); + } + +#ifdef PROGRESS_REPORT + start_progress_monitor((j_common_ptr) &cinfo, &progress); +#endif + + /* Specify data source for decompression */ + jpeg_stdio_src(&cinfo, input_file); + + /* Read file header, set default decompression parameters */ + (void) jpeg_read_header(&cinfo, TRUE); + + /* Adjust default decompression parameters by re-parsing the options */ + file_index = parse_switches(&cinfo, argc, argv, 0, TRUE); + + /* Initialize the output module now to let it override any crucial + * option settings (for instance, GIF wants to force color quantization). + */ + switch (requested_fmt) { +#ifdef BMP_SUPPORTED + case FMT_BMP: + dest_mgr = jinit_write_bmp(&cinfo, FALSE); + break; + case FMT_OS2: + dest_mgr = jinit_write_bmp(&cinfo, TRUE); + break; +#endif +#ifdef GIF_SUPPORTED + case FMT_GIF: + dest_mgr = jinit_write_gif(&cinfo); + break; +#endif +#ifdef PPM_SUPPORTED + case FMT_PPM: + dest_mgr = jinit_write_ppm(&cinfo); + break; +#endif +#ifdef RLE_SUPPORTED + case FMT_RLE: + dest_mgr = jinit_write_rle(&cinfo); + break; +#endif +#ifdef TARGA_SUPPORTED + case FMT_TARGA: + dest_mgr = jinit_write_targa(&cinfo); + break; +#endif + default: + ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT); + break; + } + dest_mgr->output_file = output_file; + + /* Start decompressor */ + (void) jpeg_start_decompress(&cinfo); + + /* Write output file header */ + (*dest_mgr->start_output) (&cinfo, dest_mgr); + + /* Process data */ + while (cinfo.output_scanline < cinfo.output_height) { + num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer, + dest_mgr->buffer_height); + (*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines); + } + +#ifdef PROGRESS_REPORT + /* Hack: count final pass as done in case finish_output does an extra pass. + * The library won't have updated completed_passes. + */ + progress.pub.completed_passes = progress.pub.total_passes; +#endif + + /* Finish decompression and release memory. + * I must do it in this order because output module has allocated memory + * of lifespan JPOOL_IMAGE; it needs to finish before releasing memory. + */ + (*dest_mgr->finish_output) (&cinfo, dest_mgr); + (void) jpeg_finish_decompress(&cinfo); + jpeg_destroy_decompress(&cinfo); + + /* Close files, if we opened them */ + if (input_file != stdin) + fclose(input_file); + if (output_file != stdout) + fclose(output_file); + +#ifdef PROGRESS_REPORT + end_progress_monitor((j_common_ptr) &cinfo); +#endif + + /* All done. */ + exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/src/SDL2/external/jpeg-9/example.c b/src/SDL2/external/jpeg-9/example.c new file mode 100644 index 000000000..1d6f6cc30 --- /dev/null +++ b/src/SDL2/external/jpeg-9/example.c @@ -0,0 +1,433 @@ +/* + * example.c + * + * This file illustrates how to use the IJG code as a subroutine library + * to read or write JPEG image files. You should look at this code in + * conjunction with the documentation file libjpeg.txt. + * + * This code will not do anything useful as-is, but it may be helpful as a + * skeleton for constructing routines that call the JPEG library. + * + * We present these routines in the same coding style used in the JPEG code + * (ANSI function definitions, etc); but you are of course free to code your + * routines in a different style if you prefer. + */ + +#include + +/* + * Include file for users of JPEG library. + * You will need to have included system headers that define at least + * the typedefs FILE and size_t before you can include jpeglib.h. + * (stdio.h is sufficient on ANSI-conforming systems.) + * You may also wish to include "jerror.h". + */ + +#include "jpeglib.h" + +/* + * is used for the optional error recovery mechanism shown in + * the second part of the example. + */ + +#include + + + +/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/ + +/* This half of the example shows how to feed data into the JPEG compressor. + * We present a minimal version that does not worry about refinements such + * as error recovery (the JPEG code will just exit() if it gets an error). + */ + + +/* + * IMAGE DATA FORMATS: + * + * The standard input image format is a rectangular array of pixels, with + * each pixel having the same number of "component" values (color channels). + * Each pixel row is an array of JSAMPLEs (which typically are unsigned chars). + * If you are working with color data, then the color values for each pixel + * must be adjacent in the row; for example, R,G,B,R,G,B,R,G,B,... for 24-bit + * RGB color. + * + * For this example, we'll assume that this data structure matches the way + * our application has stored the image in memory, so we can just pass a + * pointer to our image buffer. In particular, let's say that the image is + * RGB color and is described by: + */ + +extern JSAMPLE * image_buffer; /* Points to large array of R,G,B-order data */ +extern int image_height; /* Number of rows in image */ +extern int image_width; /* Number of columns in image */ + + +/* + * Sample routine for JPEG compression. We assume that the target file name + * and a compression quality factor are passed in. + */ + +GLOBAL(void) +write_JPEG_file (char * filename, int quality) +{ + /* This struct contains the JPEG compression parameters and pointers to + * working space (which is allocated as needed by the JPEG library). + * It is possible to have several such structures, representing multiple + * compression/decompression processes, in existence at once. We refer + * to any one struct (and its associated working data) as a "JPEG object". + */ + struct jpeg_compress_struct cinfo; + /* This struct represents a JPEG error handler. It is declared separately + * because applications often want to supply a specialized error handler + * (see the second half of this file for an example). But here we just + * take the easy way out and use the standard error handler, which will + * print a message on stderr and call exit() if compression fails. + * Note that this struct must live as long as the main JPEG parameter + * struct, to avoid dangling-pointer problems. + */ + struct jpeg_error_mgr jerr; + /* More stuff */ + FILE * outfile; /* target file */ + JSAMPROW row_pointer[1]; /* pointer to JSAMPLE row[s] */ + int row_stride; /* physical row width in image buffer */ + + /* Step 1: allocate and initialize JPEG compression object */ + + /* We have to set up the error handler first, in case the initialization + * step fails. (Unlikely, but it could happen if you are out of memory.) + * This routine fills in the contents of struct jerr, and returns jerr's + * address which we place into the link field in cinfo. + */ + cinfo.err = jpeg_std_error(&jerr); + /* Now we can initialize the JPEG compression object. */ + jpeg_create_compress(&cinfo); + + /* Step 2: specify data destination (eg, a file) */ + /* Note: steps 2 and 3 can be done in either order. */ + + /* Here we use the library-supplied code to send compressed data to a + * stdio stream. You can also write your own code to do something else. + * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that + * requires it in order to write binary files. + */ + if ((outfile = fopen(filename, "wb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_dest(&cinfo, outfile); + + /* Step 3: set parameters for compression */ + + /* First we supply a description of the input image. + * Four fields of the cinfo struct must be filled in: + */ + cinfo.image_width = image_width; /* image width and height, in pixels */ + cinfo.image_height = image_height; + cinfo.input_components = 3; /* # of color components per pixel */ + cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ + /* Now use the library's routine to set default compression parameters. + * (You must set at least cinfo.in_color_space before calling this, + * since the defaults depend on the source color space.) + */ + jpeg_set_defaults(&cinfo); + /* Now you can set any non-default parameters you wish to. + * Here we just illustrate the use of quality (quantization table) scaling: + */ + jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */); + + /* Step 4: Start compressor */ + + /* TRUE ensures that we will write a complete interchange-JPEG file. + * Pass TRUE unless you are very sure of what you're doing. + */ + jpeg_start_compress(&cinfo, TRUE); + + /* Step 5: while (scan lines remain to be written) */ + /* jpeg_write_scanlines(...); */ + + /* Here we use the library's state variable cinfo.next_scanline as the + * loop counter, so that we don't have to keep track ourselves. + * To keep things simple, we pass one scanline per call; you can pass + * more if you wish, though. + */ + row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ + + while (cinfo.next_scanline < cinfo.image_height) { + /* jpeg_write_scanlines expects an array of pointers to scanlines. + * Here the array is only one element long, but you could pass + * more than one scanline at a time if that's more convenient. + */ + row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; + (void) jpeg_write_scanlines(&cinfo, row_pointer, 1); + } + + /* Step 6: Finish compression */ + + jpeg_finish_compress(&cinfo); + /* After finish_compress, we can close the output file. */ + fclose(outfile); + + /* Step 7: release JPEG compression object */ + + /* This is an important step since it will release a good deal of memory. */ + jpeg_destroy_compress(&cinfo); + + /* And we're done! */ +} + + +/* + * SOME FINE POINTS: + * + * In the above loop, we ignored the return value of jpeg_write_scanlines, + * which is the number of scanlines actually written. We could get away + * with this because we were only relying on the value of cinfo.next_scanline, + * which will be incremented correctly. If you maintain additional loop + * variables then you should be careful to increment them properly. + * Actually, for output to a stdio stream you needn't worry, because + * then jpeg_write_scanlines will write all the lines passed (or else exit + * with a fatal error). Partial writes can only occur if you use a data + * destination module that can demand suspension of the compressor. + * (If you don't know what that's for, you don't need it.) + * + * If the compressor requires full-image buffers (for entropy-coding + * optimization or a multi-scan JPEG file), it will create temporary + * files for anything that doesn't fit within the maximum-memory setting. + * (Note that temp files are NOT needed if you use the default parameters.) + * On some systems you may need to set up a signal handler to ensure that + * temporary files are deleted if the program is interrupted. See libjpeg.txt. + * + * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG + * files to be compatible with everyone else's. If you cannot readily read + * your data in that order, you'll need an intermediate array to hold the + * image. See rdtarga.c or rdbmp.c for examples of handling bottom-to-top + * source data using the JPEG code's internal virtual-array mechanisms. + */ + + + +/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/ + +/* This half of the example shows how to read data from the JPEG decompressor. + * It's a bit more refined than the above, in that we show: + * (a) how to modify the JPEG library's standard error-reporting behavior; + * (b) how to allocate workspace using the library's memory manager. + * + * Just to make this example a little different from the first one, we'll + * assume that we do not intend to put the whole image into an in-memory + * buffer, but to send it line-by-line someplace else. We need a one- + * scanline-high JSAMPLE array as a work buffer, and we will let the JPEG + * memory manager allocate it for us. This approach is actually quite useful + * because we don't need to remember to deallocate the buffer separately: it + * will go away automatically when the JPEG object is cleaned up. + */ + + +/* + * ERROR HANDLING: + * + * The JPEG library's standard error handler (jerror.c) is divided into + * several "methods" which you can override individually. This lets you + * adjust the behavior without duplicating a lot of code, which you might + * have to update with each future release. + * + * Our example here shows how to override the "error_exit" method so that + * control is returned to the library's caller when a fatal error occurs, + * rather than calling exit() as the standard error_exit method does. + * + * We use C's setjmp/longjmp facility to return control. This means that the + * routine which calls the JPEG library must first execute a setjmp() call to + * establish the return point. We want the replacement error_exit to do a + * longjmp(). But we need to make the setjmp buffer accessible to the + * error_exit routine. To do this, we make a private extension of the + * standard JPEG error handler object. (If we were using C++, we'd say we + * were making a subclass of the regular error handler.) + * + * Here's the extended error handler struct: + */ + +struct my_error_mgr { + struct jpeg_error_mgr pub; /* "public" fields */ + + jmp_buf setjmp_buffer; /* for return to caller */ +}; + +typedef struct my_error_mgr * my_error_ptr; + +/* + * Here's the routine that will replace the standard error_exit method: + */ + +METHODDEF(void) +my_error_exit (j_common_ptr cinfo) +{ + /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */ + my_error_ptr myerr = (my_error_ptr) cinfo->err; + + /* Always display the message. */ + /* We could postpone this until after returning, if we chose. */ + (*cinfo->err->output_message) (cinfo); + + /* Return control to the setjmp point */ + longjmp(myerr->setjmp_buffer, 1); +} + + +/* + * Sample routine for JPEG decompression. We assume that the source file name + * is passed in. We want to return 1 on success, 0 on error. + */ + + +GLOBAL(int) +read_JPEG_file (char * filename) +{ + /* This struct contains the JPEG decompression parameters and pointers to + * working space (which is allocated as needed by the JPEG library). + */ + struct jpeg_decompress_struct cinfo; + /* We use our private extension JPEG error handler. + * Note that this struct must live as long as the main JPEG parameter + * struct, to avoid dangling-pointer problems. + */ + struct my_error_mgr jerr; + /* More stuff */ + FILE * infile; /* source file */ + JSAMPARRAY buffer; /* Output row buffer */ + int row_stride; /* physical row width in output buffer */ + + /* In this example we want to open the input file before doing anything else, + * so that the setjmp() error recovery below can assume the file is open. + * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that + * requires it in order to read binary files. + */ + + if ((infile = fopen(filename, "rb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + return 0; + } + + /* Step 1: allocate and initialize JPEG decompression object */ + + /* We set up the normal JPEG error routines, then override error_exit. */ + cinfo.err = jpeg_std_error(&jerr.pub); + jerr.pub.error_exit = my_error_exit; + /* Establish the setjmp return context for my_error_exit to use. */ + if (setjmp(jerr.setjmp_buffer)) { + /* If we get here, the JPEG code has signaled an error. + * We need to clean up the JPEG object, close the input file, and return. + */ + jpeg_destroy_decompress(&cinfo); + fclose(infile); + return 0; + } + /* Now we can initialize the JPEG decompression object. */ + jpeg_create_decompress(&cinfo); + + /* Step 2: specify data source (eg, a file) */ + + jpeg_stdio_src(&cinfo, infile); + + /* Step 3: read file parameters with jpeg_read_header() */ + + (void) jpeg_read_header(&cinfo, TRUE); + /* We can ignore the return value from jpeg_read_header since + * (a) suspension is not possible with the stdio data source, and + * (b) we passed TRUE to reject a tables-only JPEG file as an error. + * See libjpeg.txt for more info. + */ + + /* Step 4: set parameters for decompression */ + + /* In this example, we don't need to change any of the defaults set by + * jpeg_read_header(), so we do nothing here. + */ + + /* Step 5: Start decompressor */ + + (void) jpeg_start_decompress(&cinfo); + /* We can ignore the return value since suspension is not possible + * with the stdio data source. + */ + + /* We may need to do some setup of our own at this point before reading + * the data. After jpeg_start_decompress() we have the correct scaled + * output image dimensions available, as well as the output colormap + * if we asked for color quantization. + * In this example, we need to make an output work buffer of the right size. + */ + /* JSAMPLEs per row in output buffer */ + row_stride = cinfo.output_width * cinfo.output_components; + /* Make a one-row-high sample array that will go away when done with image */ + buffer = (*cinfo.mem->alloc_sarray) + ((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1); + + /* Step 6: while (scan lines remain to be read) */ + /* jpeg_read_scanlines(...); */ + + /* Here we use the library's state variable cinfo.output_scanline as the + * loop counter, so that we don't have to keep track ourselves. + */ + while (cinfo.output_scanline < cinfo.output_height) { + /* jpeg_read_scanlines expects an array of pointers to scanlines. + * Here the array is only one element long, but you could ask for + * more than one scanline at a time if that's more convenient. + */ + (void) jpeg_read_scanlines(&cinfo, buffer, 1); + /* Assume put_scanline_someplace wants a pointer and sample count. */ + put_scanline_someplace(buffer[0], row_stride); + } + + /* Step 7: Finish decompression */ + + (void) jpeg_finish_decompress(&cinfo); + /* We can ignore the return value since suspension is not possible + * with the stdio data source. + */ + + /* Step 8: Release JPEG decompression object */ + + /* This is an important step since it will release a good deal of memory. */ + jpeg_destroy_decompress(&cinfo); + + /* After finish_decompress, we can close the input file. + * Here we postpone it until after no more JPEG errors are possible, + * so as to simplify the setjmp error logic above. (Actually, I don't + * think that jpeg_destroy can do an error exit, but why assume anything...) + */ + fclose(infile); + + /* At this point you may want to check to see whether any corrupt-data + * warnings occurred (test whether jerr.pub.num_warnings is nonzero). + */ + + /* And we're done! */ + return 1; +} + + +/* + * SOME FINE POINTS: + * + * In the above code, we ignored the return value of jpeg_read_scanlines, + * which is the number of scanlines actually read. We could get away with + * this because we asked for only one line at a time and we weren't using + * a suspending data source. See libjpeg.txt for more info. + * + * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress(); + * we should have done it beforehand to ensure that the space would be + * counted against the JPEG max_memory setting. In some systems the above + * code would risk an out-of-memory error. However, in general we don't + * know the output image dimensions before jpeg_start_decompress(), unless we + * call jpeg_calc_output_dimensions(). See libjpeg.txt for more about this. + * + * Scanlines are returned in the same order as they appear in the JPEG file, + * which is standardly top-to-bottom. If you must emit data bottom-to-top, + * you can use one of the virtual arrays provided by the JPEG memory manager + * to invert the data. See wrbmp.c for an example. + * + * As with compression, some operating modes may require temporary files. + * On some systems you may need to set up a signal handler to ensure that + * temporary files are deleted if the program is interrupted. See libjpeg.txt. + */ diff --git a/src/SDL2/external/jpeg-9/filelist.txt b/src/SDL2/external/jpeg-9/filelist.txt new file mode 100644 index 000000000..86633bc61 --- /dev/null +++ b/src/SDL2/external/jpeg-9/filelist.txt @@ -0,0 +1,214 @@ +IJG JPEG LIBRARY: FILE LIST + +Copyright (C) 1994-2012, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +Here is a road map to the files in the IJG JPEG distribution. The +distribution includes the JPEG library proper, plus two application +programs ("cjpeg" and "djpeg") which use the library to convert JPEG +files to and from some other popular image formats. A third application +"jpegtran" uses the library to do lossless conversion between different +variants of JPEG. There are also two stand-alone applications, +"rdjpgcom" and "wrjpgcom". + + +THE JPEG LIBRARY +================ + +Include files: + +jpeglib.h JPEG library's exported data and function declarations. +jconfig.h Configuration declarations. Note: this file is not present + in the distribution; it is generated during installation. +jmorecfg.h Additional configuration declarations; need not be changed + for a standard installation. +jerror.h Declares JPEG library's error and trace message codes. +jinclude.h Central include file used by all IJG .c files to reference + system include files. +jpegint.h JPEG library's internal data structures. +jdct.h Private declarations for forward & reverse DCT subsystems. +jmemsys.h Private declarations for memory management subsystem. +jversion.h Version information. + +Applications using the library should include jpeglib.h (which in turn +includes jconfig.h and jmorecfg.h). Optionally, jerror.h may be included +if the application needs to reference individual JPEG error codes. The +other include files are intended for internal use and would not normally +be included by an application program. (cjpeg/djpeg/etc do use jinclude.h, +since its function is to improve portability of the whole IJG distribution. +Most other applications will directly include the system include files they +want, and hence won't need jinclude.h.) + + +C source code files: + +These files contain most of the functions intended to be called directly by +an application program: + +jcapimin.c Application program interface: core routines for compression. +jcapistd.c Application program interface: standard compression. +jdapimin.c Application program interface: core routines for decompression. +jdapistd.c Application program interface: standard decompression. +jcomapi.c Application program interface routines common to compression + and decompression. +jcparam.c Compression parameter setting helper routines. +jctrans.c API and library routines for transcoding compression. +jdtrans.c API and library routines for transcoding decompression. + +Compression side of the library: + +jcinit.c Initialization: determines which other modules to use. +jcmaster.c Master control: setup and inter-pass sequencing logic. +jcmainct.c Main buffer controller (preprocessor => JPEG compressor). +jcprepct.c Preprocessor buffer controller. +jccoefct.c Buffer controller for DCT coefficient buffer. +jccolor.c Color space conversion. +jcsample.c Downsampling. +jcdctmgr.c DCT manager (DCT implementation selection & control). +jfdctint.c Forward DCT using slow-but-accurate integer method. +jfdctfst.c Forward DCT using faster, less accurate integer method. +jfdctflt.c Forward DCT using floating-point arithmetic. +jchuff.c Huffman entropy coding. +jcarith.c Arithmetic entropy coding. +jcmarker.c JPEG marker writing. +jdatadst.c Data destination managers for memory and stdio output. + +Decompression side of the library: + +jdmaster.c Master control: determines which other modules to use. +jdinput.c Input controller: controls input processing modules. +jdmainct.c Main buffer controller (JPEG decompressor => postprocessor). +jdcoefct.c Buffer controller for DCT coefficient buffer. +jdpostct.c Postprocessor buffer controller. +jdmarker.c JPEG marker reading. +jdhuff.c Huffman entropy decoding. +jdarith.c Arithmetic entropy decoding. +jddctmgr.c IDCT manager (IDCT implementation selection & control). +jidctint.c Inverse DCT using slow-but-accurate integer method. +jidctfst.c Inverse DCT using faster, less accurate integer method. +jidctflt.c Inverse DCT using floating-point arithmetic. +jdsample.c Upsampling. +jdcolor.c Color space conversion. +jdmerge.c Merged upsampling/color conversion (faster, lower quality). +jquant1.c One-pass color quantization using a fixed-spacing colormap. +jquant2.c Two-pass color quantization using a custom-generated colormap. + Also handles one-pass quantization to an externally given map. +jdatasrc.c Data source managers for memory and stdio input. + +Support files for both compression and decompression: + +jaricom.c Tables for common use in arithmetic entropy encoding and + decoding routines. +jerror.c Standard error handling routines (application replaceable). +jmemmgr.c System-independent (more or less) memory management code. +jutils.c Miscellaneous utility routines. + +jmemmgr.c relies on a system-dependent memory management module. The IJG +distribution includes the following implementations of the system-dependent +module: + +jmemnobs.c "No backing store": assumes adequate virtual memory exists. +jmemansi.c Makes temporary files with ANSI-standard routine tmpfile(). +jmemname.c Makes temporary files with program-generated file names. +jmemdos.c Custom implementation for MS-DOS (16-bit environment only): + can use extended and expanded memory as well as temp files. +jmemmac.c Custom implementation for Apple Macintosh. + +Exactly one of the system-dependent modules should be configured into an +installed JPEG library (see install.txt for hints about which one to use). +On unusual systems you may find it worthwhile to make a special +system-dependent memory manager. + + +Non-C source code files: + +jmemdosa.asm 80x86 assembly code support for jmemdos.c; used only in + MS-DOS-specific configurations of the JPEG library. + + +CJPEG/DJPEG/JPEGTRAN +==================== + +Include files: + +cdjpeg.h Declarations shared by cjpeg/djpeg/jpegtran modules. +cderror.h Additional error and trace message codes for cjpeg et al. +transupp.h Declarations for jpegtran support routines in transupp.c. + +C source code files: + +cjpeg.c Main program for cjpeg. +djpeg.c Main program for djpeg. +jpegtran.c Main program for jpegtran. +cdjpeg.c Utility routines used by all three programs. +rdcolmap.c Code to read a colormap file for djpeg's "-map" switch. +rdswitch.c Code to process some of cjpeg's more complex switches. + Also used by jpegtran. +transupp.c Support code for jpegtran: lossless image manipulations. + +Image file reader modules for cjpeg: + +rdbmp.c BMP file input. +rdgif.c GIF file input (now just a stub). +rdppm.c PPM/PGM file input. +rdrle.c Utah RLE file input. +rdtarga.c Targa file input. + +Image file writer modules for djpeg: + +wrbmp.c BMP file output. +wrgif.c GIF file output (a mere shadow of its former self). +wrppm.c PPM/PGM file output. +wrrle.c Utah RLE file output. +wrtarga.c Targa file output. + + +RDJPGCOM/WRJPGCOM +================= + +C source code files: + +rdjpgcom.c Stand-alone rdjpgcom application. +wrjpgcom.c Stand-alone wrjpgcom application. + +These programs do not depend on the IJG library. They do use +jconfig.h and jinclude.h, only to improve portability. + + +ADDITIONAL FILES +================ + +Documentation (see README for a guide to the documentation files): + +README Master documentation file. +*.txt Other documentation files. +*.1 Documentation in Unix man page format. +change.log Version-to-version change highlights. +example.c Sample code for calling JPEG library. + +Configuration/installation files and programs (see install.txt for more info): + +configure Unix shell script to perform automatic configuration. +configure.ac Source file for use with Autoconf to generate configure. +ltmain.sh Support scripts for configure (from GNU libtool). +config.guess +config.sub +depcomp +missing +ar-lib +install-sh Install shell script for those Unix systems lacking one. +Makefile.in Makefile input for configure. +Makefile.am Source file for use with Automake to generate Makefile.in. +ckconfig.c Program to generate jconfig.h on non-Unix systems. +jconfig.txt Template for making jconfig.h by hand. +mak*.* Sample makefiles for particular systems. +jconfig.* Sample jconfig.h for particular systems. +libjpeg.map Script to generate shared library with versioned symbols. +aclocal.m4 M4 macro definitions for use with Autoconf. + +Test files (see install.txt for test procedure): + +test*.* Source and comparison files for confidence test. + These are binary image files, NOT text files. diff --git a/src/SDL2/external/jpeg-9/install-sh b/src/SDL2/external/jpeg-9/install-sh new file mode 100755 index 000000000..377bb8687 --- /dev/null +++ b/src/SDL2/external/jpeg-9/install-sh @@ -0,0 +1,527 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2011-11-20.07; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# 'make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call 'install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names problematic for 'test' and other utilities. + case $src in + -* | [=\(\)!]) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + dst=$dst_arg + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/src/SDL2/external/jpeg-9/install.txt b/src/SDL2/external/jpeg-9/install.txt new file mode 100644 index 000000000..7ca92cbc9 --- /dev/null +++ b/src/SDL2/external/jpeg-9/install.txt @@ -0,0 +1,1096 @@ +INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software + +Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +This file explains how to configure and install the IJG software. We have +tried to make this software extremely portable and flexible, so that it can be +adapted to almost any environment. The downside of this decision is that the +installation process is complicated. We have provided shortcuts to simplify +the task on common systems. But in any case, you will need at least a little +familiarity with C programming and program build procedures for your system. + +If you are only using this software as part of a larger program, the larger +program's installation procedure may take care of configuring the IJG code. +For example, Ghostscript's installation script will configure the IJG code. +You don't need to read this file if you just want to compile Ghostscript. + +If you are on a Unix machine, you may not need to read this file at all. +Try doing + ./configure + make + make test +If that doesn't complain, do + make install +(better do "make -n install" first to see if the makefile will put the files +where you want them). Read further if you run into snags or want to customize +the code for your system. + + +TABLE OF CONTENTS +----------------- + +Before you start +Configuring the software: + using the automatic "configure" script + using one of the supplied jconfig and makefile files + by hand +Building the software +Testing the software +Installing the software +Optional stuff +Optimization +Hints for specific systems + + +BEFORE YOU START +================ + +Before installing the software you must unpack the distributed source code. +Since you are reading this file, you have probably already succeeded in this +task. However, there is a potential for error if you needed to convert the +files to the local standard text file format (for example, if you are on +MS-DOS you may have converted LF end-of-line to CR/LF). You must apply +such conversion to all the files EXCEPT those whose names begin with "test". +The test files contain binary data; if you change them in any way then the +self-test will give bad results. + +Please check the last section of this file to see if there are hints for the +specific machine or compiler you are using. + + +CONFIGURING THE SOFTWARE +======================== + +To configure the IJG code for your system, you need to create two files: + * jconfig.h: contains values for system-dependent #define symbols. + * Makefile: controls the compilation process. +(On a non-Unix machine, you may create "project files" or some other +substitute for a Makefile. jconfig.h is needed in any environment.) + +We provide three different ways to generate these files: + * On a Unix system, you can just run the "configure" script. + * We provide sample jconfig files and makefiles for popular machines; + if your machine matches one of the samples, just copy the right sample + files to jconfig.h and Makefile. + * If all else fails, read the instructions below and make your own files. + + +Configuring the software using the automatic "configure" script +--------------------------------------------------------------- + +If you are on a Unix machine, you can just type + ./configure +and let the configure script construct appropriate configuration files. +If you're using "csh" on an old version of System V, you might need to type + sh configure +instead to prevent csh from trying to execute configure itself. +Expect configure to run for a few minutes, particularly on slower machines; +it works by compiling a series of test programs. + +Configure was created with GNU Autoconf and it follows the usual conventions +for GNU configure scripts. It makes a few assumptions that you may want to +override. You can do this by providing optional switches to configure: + +* Configure will build both static and shared libraries, if possible. +If you want to build libjpeg only as a static library, say + ./configure --disable-shared +If you want to build libjpeg only as a shared library, say + ./configure --disable-static +Configure uses GNU libtool to take care of system-dependent shared library +building methods. + +* Configure will use gcc (GNU C compiler) if it's available, otherwise cc. +To force a particular compiler to be selected, use the CC option, for example + ./configure CC='cc' +The same method can be used to include any unusual compiler switches. +For example, on HP-UX you probably want to say + ./configure CC='cc -Aa' +to get HP's compiler to run in ANSI mode. + +* The default CFLAGS setting is "-g" for non-gcc compilers, "-g -O2" for gcc. +You can override this by saying, for example, + ./configure CFLAGS='-O2' +if you want to compile without debugging support. + +* Configure will set up the makefile so that "make install" will install files +into /usr/local/bin, /usr/local/man, etc. You can specify an installation +prefix other than "/usr/local" by giving configure the option "--prefix=PATH". + +* If you don't have a lot of swap space, you may need to enable the IJG +software's internal virtual memory mechanism. To do this, give the option +"--enable-maxmem=N" where N is the default maxmemory limit in megabytes. +This is discussed in more detail under "Selecting a memory manager", below. +You probably don't need to worry about this on reasonably-sized Unix machines, +unless you plan to process very large images. + +Configure has some other features that are useful if you are cross-compiling +or working in a network of multiple machine types; but if you need those +features, you probably already know how to use them. + + +Configuring the software using one of the supplied jconfig and makefile files +----------------------------------------------------------------------------- + +If you have one of these systems, you can just use the provided configuration +files: + +Makefile jconfig file System and/or compiler + +makefile.manx jconfig.manx Amiga, Manx Aztec C +makefile.sas jconfig.sas Amiga, SAS C +makeproj.mac jconfig.mac Apple Macintosh, Metrowerks CodeWarrior +mak*jpeg.st jconfig.st Atari ST/STE/TT, Pure C or Turbo C +makefile.bcc jconfig.bcc MS-DOS or OS/2, Borland C +makefile.dj jconfig.dj MS-DOS, DJGPP (Delorie's port of GNU C) +makefile.mc6 jconfig.mc6 MS-DOS, Microsoft C (16-bit only) +makefile.wat jconfig.wat MS-DOS, OS/2, or Windows NT, Watcom C +makefile.vc jconfig.vc Windows NT/95, MS Visual C++ +make*.vc6 jconfig.vc Windows NT/95, MS Visual C++ 6 +make*.v10 jconfig.vc Windows NT/95, MS Visual C++ 2010 (v10) +makefile.mms jconfig.vms Digital VMS, with MMS software +makefile.vms jconfig.vms Digital VMS, without MMS software + +Copy the proper jconfig file to jconfig.h and the makefile to Makefile (or +whatever your system uses as the standard makefile name). For more info see +the appropriate system-specific hints section near the end of this file. + + +Configuring the software by hand +-------------------------------- + +First, generate a jconfig.h file. If you are moderately familiar with C, +the comments in jconfig.txt should be enough information to do this; just +copy jconfig.txt to jconfig.h and edit it appropriately. Otherwise, you may +prefer to use the ckconfig.c program. You will need to compile and execute +ckconfig.c by hand --- we hope you know at least enough to do that. +ckconfig.c may not compile the first try (in fact, the whole idea is for it +to fail if anything is going to). If you get compile errors, fix them by +editing ckconfig.c according to the directions given in ckconfig.c. Once +you get it to run, it will write a suitable jconfig.h file, and will also +print out some advice about which makefile to use. + +You may also want to look at the canned jconfig files, if there is one for a +system similar to yours. + +Second, select a makefile and copy it to Makefile (or whatever your system +uses as the standard makefile name). The most generic makefiles we provide +are + makefile.ansi: if your C compiler supports function prototypes + makefile.unix: if not. +(You have function prototypes if ckconfig.c put "#define HAVE_PROTOTYPES" +in jconfig.h.) You may want to start from one of the other makefiles if +there is one for a system similar to yours. + +Look over the selected Makefile and adjust options as needed. In particular +you may want to change the CC and CFLAGS definitions. For instance, if you +are using GCC, set CC=gcc. If you had to use any compiler switches to get +ckconfig.c to work, make sure the same switches are in CFLAGS. + +If you are on a system that doesn't use makefiles, you'll need to set up +project files (or whatever you do use) to compile all the source files and +link them into executable files cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom. +See the file lists in any of the makefiles to find out which files go into +each program. Note that the provided makefiles all make a "library" file +libjpeg first, but you don't have to do that if you don't want to; the file +lists identify which source files are actually needed for compression, +decompression, or both. As a last resort, you can make a batch script that +just compiles everything and links it all together; makefile.vms is an example +of this (it's for VMS systems that have no make-like utility). + +Here are comments about some specific configuration decisions you'll +need to make: + +Command line style +------------------ + +These programs can use a Unix-like command line style which supports +redirection and piping, like this: + cjpeg inputfile >outputfile + cjpeg outputfile + source program | cjpeg >outputfile +The simpler "two file" command line style is just + cjpeg inputfile outputfile +You may prefer the two-file style, particularly if you don't have pipes. + +You MUST use two-file style on any system that doesn't cope well with binary +data fed through stdin/stdout; this is true for some MS-DOS compilers, for +example. If you're not on a Unix system, it's safest to assume you need +two-file style. (But if your compiler provides either the Posix-standard +fdopen() library routine or a Microsoft-compatible setmode() routine, you +can safely use the Unix command line style, by defining USE_FDOPEN or +USE_SETMODE respectively.) + +To use the two-file style, make jconfig.h say "#define TWO_FILE_COMMANDLINE". + +Selecting a memory manager +-------------------------- + +The IJG code is capable of working on images that are too big to fit in main +memory; data is swapped out to temporary files as necessary. However, the +code to do this is rather system-dependent. We provide five different +memory managers: + +* jmemansi.c This version uses the ANSI-standard library routine tmpfile(), + which not all non-ANSI systems have. On some systems + tmpfile() may put the temporary file in a non-optimal + location; if you don't like what it does, use jmemname.c. + +* jmemname.c This version creates named temporary files. For anything + except a Unix machine, you'll need to configure the + select_file_name() routine appropriately; see the comments + near the head of jmemname.c. If you use this version, define + NEED_SIGNAL_CATCHER in jconfig.h to make sure the temp files + are removed if the program is aborted. + +* jmemnobs.c (That stands for No Backing Store :-).) This will compile on + almost any system, but it assumes you have enough main memory + or virtual memory to hold the biggest images you work with. + +* jmemdos.c This should be used with most 16-bit MS-DOS compilers. + See the system-specific notes about MS-DOS for more info. + IMPORTANT: if you use this, define USE_MSDOS_MEMMGR in + jconfig.h, and include the assembly file jmemdosa.asm in the + programs. The supplied makefiles and jconfig files for + 16-bit MS-DOS compilers already do both. + +* jmemmac.c Custom version for Apple Macintosh; see the system-specific + notes for Macintosh for more info. + +To use a particular memory manager, change the SYSDEPMEM variable in your +makefile to equal the corresponding object file name (for example, jmemansi.o +or jmemansi.obj for jmemansi.c). + +If you have plenty of (real or virtual) main memory, just use jmemnobs.c. +"Plenty" means about ten bytes for every pixel in the largest images +you plan to process, so a lot of systems don't meet this criterion. +If yours doesn't, try jmemansi.c first. If that doesn't compile, you'll have +to use jmemname.c; be sure to adjust select_file_name() for local conditions. +You may also need to change unlink() to remove() in close_backing_store(). + +Except with jmemnobs.c or jmemmac.c, you need to adjust the DEFAULT_MAX_MEM +setting to a reasonable value for your system (either by adding a #define for +DEFAULT_MAX_MEM to jconfig.h, or by adding a -D switch to the Makefile). +This value limits the amount of data space the program will attempt to +allocate. Code and static data space isn't counted, so the actual memory +needs for cjpeg or djpeg are typically 100 to 150Kb more than the max-memory +setting. Larger max-memory settings reduce the amount of I/O needed to +process a large image, but too large a value can result in "insufficient +memory" failures. On most Unix machines (and other systems with virtual +memory), just set DEFAULT_MAX_MEM to several million and forget it. At the +other end of the spectrum, for MS-DOS machines you probably can't go much +above 300K to 400K. (On MS-DOS the value refers to conventional memory only. +Extended/expanded memory is handled separately by jmemdos.c.) + + +BUILDING THE SOFTWARE +===================== + +Now you should be able to compile the software. Just say "make" (or +whatever's necessary to start the compilation). Have a cup of coffee. + +Here are some things that could go wrong: + +If your compiler complains about undefined structures, you should be able to +shut it up by putting "#define INCOMPLETE_TYPES_BROKEN" in jconfig.h. + +If you have trouble with missing system include files or inclusion of the +wrong ones, read jinclude.h. This shouldn't happen if you used configure +or ckconfig.c to set up jconfig.h. + +There are a fair number of routines that do not use all of their parameters; +some compilers will issue warnings about this, which you can ignore. There +are also a few configuration checks that may give "unreachable code" warnings. +Any other warning deserves investigation. + +If you don't have a getenv() library routine, define NO_GETENV. + +Also see the system-specific hints, below. + + +TESTING THE SOFTWARE +==================== + +As a quick test of functionality we've included a small sample image in +several forms: + testorig.jpg Starting point for the djpeg tests. + testimg.ppm The output of djpeg testorig.jpg + testimg.bmp The output of djpeg -bmp -colors 256 testorig.jpg + testimg.jpg The output of cjpeg testimg.ppm + testprog.jpg Progressive-mode equivalent of testorig.jpg. + testimgp.jpg The output of cjpeg -progressive -optimize testimg.ppm +(The first- and second-generation .jpg files aren't identical since the +default compression parameters are lossy.) If you can generate duplicates +of the testimg* files then you probably have working programs. + +With most of the makefiles, "make test" will perform the necessary +comparisons. + +If you're using a makefile that doesn't provide the test option, run djpeg +and cjpeg by hand and compare the output files to testimg* with whatever +binary file comparison tool you have. The files should be bit-for-bit +identical. + +If the programs complain "MAX_ALLOC_CHUNK is wrong, please fix", then you +need to reduce MAX_ALLOC_CHUNK to a value that fits in type size_t. +Try adding "#define MAX_ALLOC_CHUNK 65520L" to jconfig.h. A less likely +configuration error is "ALIGN_TYPE is wrong, please fix": defining ALIGN_TYPE +as long should take care of that one. + +If the cjpeg test run fails with "Missing Huffman code table entry", it's a +good bet that you needed to define RIGHT_SHIFT_IS_UNSIGNED. Go back to the +configuration step and run ckconfig.c. (This is a good plan for any other +test failure, too.) + +If you are using Unix (one-file) command line style on a non-Unix system, +it's a good idea to check that binary I/O through stdin/stdout actually +works. You should get the same results from "djpeg out.ppm" +as from "djpeg -outfile out.ppm testorig.jpg". Note that the makefiles all +use the latter style and therefore do not exercise stdin/stdout! If this +check fails, try recompiling with USE_SETMODE or USE_FDOPEN defined. +If it still doesn't work, better use two-file style. + +If you chose a memory manager other than jmemnobs.c, you should test that +temporary-file usage works. Try "djpeg -bmp -colors 256 -max 0 testorig.jpg" +and make sure its output matches testimg.bmp. If you have any really large +images handy, try compressing them with -optimize and/or decompressing with +-colors 256 to make sure your DEFAULT_MAX_MEM setting is not too large. + +NOTE: this is far from an exhaustive test of the JPEG software; some modules, +such as 1-pass color quantization, are not exercised at all. It's just a +quick test to give you some confidence that you haven't missed something +major. + + +INSTALLING THE SOFTWARE +======================= + +Once you're done with the above steps, you can install the software by +copying the executable files (cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom) +to wherever you normally install programs. On Unix systems, you'll also want +to put the man pages (cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1) +in the man-page directory. The pre-fab makefiles don't support this step +since there's such a wide variety of installation procedures on different +systems. + +If you generated a Makefile with the "configure" script, you can just say + make install +to install the programs and their man pages into the standard places. +(You'll probably need to be root to do this.) We recommend first saying + make -n install +to see where configure thought the files should go. You may need to edit +the Makefile, particularly if your system's conventions for man page +filenames don't match what configure expects. + +If you want to install the IJG library itself, for use in compiling other +programs besides ours, then you need to put the four include files + jpeglib.h jerror.h jconfig.h jmorecfg.h +into your include-file directory, and put the library file libjpeg.a +(extension may vary depending on system) wherever library files go. +If you generated a Makefile with "configure", it will do what it thinks +is the right thing if you say + make install-lib + + +OPTIONAL STUFF +============== + +Progress monitor: + +If you like, you can #define PROGRESS_REPORT (in jconfig.h) to enable display +of percent-done progress reports. The routine provided in cdjpeg.c merely +prints percentages to stderr, but you can customize it to do something +fancier. + +Utah RLE file format support: + +We distribute the software with support for RLE image files (Utah Raster +Toolkit format) disabled, because the RLE support won't compile without the +Utah library. If you have URT version 3.1 or later, you can enable RLE +support as follows: + 1. #define RLE_SUPPORTED in jconfig.h. + 2. Add a -I option to CFLAGS in the Makefile for the directory + containing the URT .h files (typically the "include" + subdirectory of the URT distribution). + 3. Add -L... -lrle to LDLIBS in the Makefile, where ... specifies + the directory containing the URT "librle.a" file (typically the + "lib" subdirectory of the URT distribution). + +Support for 12-bit-deep pixel data: + +The JPEG standard allows either 8-bit or 12-bit data precision. (For color, +this means 8 or 12 bits per channel, of course.) If you need to work with +deeper than 8-bit data, you can compile the IJG code for 12-bit operation. +To do so: + 1. In jmorecfg.h, define BITS_IN_JSAMPLE as 12 rather than 8. + 2. In jconfig.h, undefine BMP_SUPPORTED, RLE_SUPPORTED, and TARGA_SUPPORTED, + because the code for those formats doesn't handle 12-bit data and won't + even compile. (The PPM code does work, as explained below. The GIF + code works too; it scales 8-bit GIF data to and from 12-bit depth + automatically.) + 3. Compile. Don't expect "make test" to pass, since the supplied test + files are for 8-bit data. + +Currently, 12-bit support does not work on 16-bit-int machines. + +Note that a 12-bit version will not read 8-bit JPEG files, nor vice versa; +so you'll want to keep around a regular 8-bit compilation as well. +(Run-time selection of data depth, to allow a single copy that does both, +is possible but would probably slow things down considerably; it's very low +on our to-do list.) + +The PPM reader (rdppm.c) can read 12-bit data from either text-format or +binary-format PPM and PGM files. Binary-format PPM/PGM files which have a +maxval greater than 255 are assumed to use 2 bytes per sample, MSB first +(big-endian order). As of early 1995, 2-byte binary format is not +officially supported by the PBMPLUS library, but it is expected that a +future release of PBMPLUS will support it. Note that the PPM reader will +read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming +data is automatically rescaled to either maxval=255 or maxval=4095 as +appropriate for the cjpeg bit depth. + +The PPM writer (wrppm.c) will normally write 2-byte binary PPM or PGM +format, maxval 4095, when compiled with BITS_IN_JSAMPLE=12. Since this +format is not yet widely supported, you can disable it by compiling wrppm.c +with PPM_NORAWWORD defined; then the data is scaled down to 8 bits to make a +standard 1-byte/sample PPM or PGM file. (Yes, this means still another copy +of djpeg to keep around. But hopefully you won't need it for very long. +Poskanzer's supposed to get that new PBMPLUS release out Real Soon Now.) + +Of course, if you are working with 12-bit data, you probably have it stored +in some other, nonstandard format. In that case you'll probably want to +write your own I/O modules to read and write your format. + +Note that a 12-bit version of cjpeg always runs in "-optimize" mode, in +order to generate valid Huffman tables. This is necessary because our +default Huffman tables only cover 8-bit data. + +Removing code: + +If you need to make a smaller version of the JPEG software, some optional +functions can be removed at compile time. See the xxx_SUPPORTED #defines in +jconfig.h and jmorecfg.h. If at all possible, we recommend that you leave in +decoder support for all valid JPEG files, to ensure that you can read anyone's +output. Taking out support for image file formats that you don't use is the +most painless way to make the programs smaller. Another possibility is to +remove some of the DCT methods: in particular, the "IFAST" method may not be +enough faster than the others to be worth keeping on your machine. (If you +do remove ISLOW or IFAST, be sure to redefine JDCT_DEFAULT or JDCT_FASTEST +to a supported method, by adding a #define in jconfig.h.) + + +OPTIMIZATION +============ + +Unless you own a Cray, you'll probably be interested in making the JPEG +software go as fast as possible. This section covers some machine-dependent +optimizations you may want to try. We suggest that before trying any of +this, you first get the basic installation to pass the self-test step. +Repeat the self-test after any optimization to make sure that you haven't +broken anything. + +The integer DCT routines perform a lot of multiplications. These +multiplications must yield 32-bit results, but none of their input values +are more than 16 bits wide. On many machines, notably the 680x0 and 80x86 +CPUs, a 16x16=>32 bit multiply instruction is faster than a full 32x32=>32 +bit multiply. Unfortunately there is no portable way to specify such a +multiplication in C, but some compilers can generate one when you use the +right combination of casts. See the MULTIPLYxxx macro definitions in +jdct.h. If your compiler makes "int" be 32 bits and "short" be 16 bits, +defining SHORTxSHORT_32 is fairly likely to work. When experimenting with +alternate definitions, be sure to test not only whether the code still works +(use the self-test), but also whether it is actually faster --- on some +compilers, alternate definitions may compute the right answer, yet be slower +than the default. Timing cjpeg on a large PGM (grayscale) input file is the +best way to check this, as the DCT will be the largest fraction of the runtime +in that mode. (Note: some of the distributed compiler-specific jconfig files +already contain #define switches to select appropriate MULTIPLYxxx +definitions.) + +If your machine has sufficiently fast floating point hardware, you may find +that the float DCT method is faster than the integer DCT methods, even +after tweaking the integer multiply macros. In that case you may want to +make the float DCT be the default method. (The only objection to this is +that float DCT results may vary slightly across machines.) To do that, add +"#define JDCT_DEFAULT JDCT_FLOAT" to jconfig.h. Even if you don't change +the default, you should redefine JDCT_FASTEST, which is the method selected +by djpeg's -fast switch. Don't forget to update the documentation files +(usage.txt and/or cjpeg.1, djpeg.1) to agree with what you've done. + +If access to "short" arrays is slow on your machine, it may be a win to +define type JCOEF as int rather than short. This will cost a good deal of +memory though, particularly in some multi-pass modes, so don't do it unless +you have memory to burn and short is REALLY slow. + +If your compiler can compile function calls in-line, make sure the INLINE +macro in jmorecfg.h is defined as the keyword that marks a function +inline-able. Some compilers have a switch that tells the compiler to inline +any function it thinks is profitable (e.g., -finline-functions for gcc). +Enabling such a switch is likely to make the compiled code bigger but faster. + +In general, it's worth trying the maximum optimization level of your compiler, +and experimenting with any optional optimizations such as loop unrolling. +(Unfortunately, far too many compilers have optimizer bugs ... be prepared to +back off if the code fails self-test.) If you do any experimentation along +these lines, please report the optimal settings to jpeg-info@jpegclub.org so +we can mention them in future releases. Be sure to specify your machine and +compiler version. + + +HINTS FOR SPECIFIC SYSTEMS +========================== + +We welcome reports on changes needed for systems not mentioned here. Submit +'em to jpeg-info@jpegclub.org. Also, if configure or ckconfig.c is wrong +about how to configure the JPEG software for your system, please let us know. + + +Acorn RISC OS: + +(Thanks to Simon Middleton for these hints on compiling with Desktop C.) +After renaming the files according to Acorn conventions, take a copy of +makefile.ansi, change all occurrences of 'libjpeg.a' to 'libjpeg.o' and +change these definitions as indicated: + +CFLAGS= -throwback -IC: -Wn +LDLIBS=C:o.Stubs +SYSDEPMEM=jmemansi.o +LN=Link +AR=LibFile -c -o + +Also add a new line '.c.o:; $(cc) $< $(cflags) -c -o $@'. Remove the +lines '$(RM) libjpeg.o' and '$(AR2) libjpeg.o' and the 'jconfig.h' +dependency section. + +Copy jconfig.txt to jconfig.h. Edit jconfig.h to define TWO_FILE_COMMANDLINE +and CHAR_IS_UNSIGNED. + +Run the makefile using !AMU not !Make. If you want to use the 'clean' and +'test' makefile entries then you will have to fiddle with the syntax a bit +and rename the test files. + + +Amiga: + +SAS C 6.50 reportedly is too buggy to compile the IJG code properly. +A patch to update to 6.51 is available from SAS or AmiNet FTP sites. + +The supplied config files are set up to use jmemname.c as the memory +manager, with temporary files being created on the device named by +"JPEGTMP:". + + +Atari ST/STE/TT: + +Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st +to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively. The +project files should work as-is with Pure C. For Turbo C, change library +filenames "pc..." to "tc..." in each project file. Note that libjpeg.prj +selects jmemansi.c as the recommended memory manager. You'll probably want to +adjust the DEFAULT_MAX_MEM setting --- you want it to be a couple hundred K +less than your normal free memory. Put "#define DEFAULT_MAX_MEM nnnn" into +jconfig.h to do this. + +To use the 68881/68882 coprocessor for the floating point DCT, add the +compiler option "-8" to the project files and replace pcfltlib.lib with +pc881lib.lib in cjpeg.prj and djpeg.prj. Or if you don't have a +coprocessor, you may prefer to remove the float DCT code by undefining +DCT_FLOAT_SUPPORTED in jmorecfg.h (since without a coprocessor, the float +code will be too slow to be useful). In that case, you can delete +pcfltlib.lib from the project files. + +Note that you must make libjpeg.lib before making cjpeg.ttp, djpeg.ttp, +or jpegtran.ttp. You'll have to perform the self-test by hand. + +We haven't bothered to include project files for rdjpgcom and wrjpgcom. +Those source files should just be compiled by themselves; they don't +depend on the JPEG library. You can use the default.prj project file +of the Pure C distribution to make the programs. + +There is a bug in some older versions of the Turbo C library which causes the +space used by temporary files created with "tmpfile()" not to be freed after +an abnormal program exit. If you check your disk afterwards, you will find +cluster chains that are allocated but not used by a file. This should not +happen in cjpeg/djpeg/jpegtran, since we enable a signal catcher to explicitly +close temp files before exiting. But if you use the JPEG library with your +own code, be sure to supply a signal catcher, or else use a different +system-dependent memory manager. + + +Cray: + +Should you be so fortunate as to be running JPEG on a Cray YMP, there is a +compiler bug in old versions of Cray's Standard C (prior to 3.1). If you +still have an old compiler, you'll need to insert a line reading +"#pragma novector" just before the loop + for (i = 1; i <= (int) htbl->bits[l]; i++) + huffsize[p++] = (char) l; +in fix_huff_tbl (in V5beta1, line 204 of jchuff.c and line 176 of jdhuff.c). +[This bug may or may not still occur with the current IJG code, but it's +probably a dead issue anyway...] + + +HP-UX: + +If you have HP-UX 7.05 or later with the "software development" C compiler, +you should run the compiler in ANSI mode. If using the configure script, +say + ./configure CC='cc -Aa' +(or -Ae if you prefer). If configuring by hand, use makefile.ansi and add +"-Aa" to the CFLAGS line in the makefile. + +If you have a pre-7.05 system, or if you are using the non-ANSI C compiler +delivered with a minimum HP-UX system, then you must use makefile.unix +(and do NOT add -Aa); or just run configure without the CC option. + +On HP 9000 series 800 machines, the HP C compiler is buggy in revisions prior +to A.08.07. If you get complaints about "not a typedef name", you'll have to +use makefile.unix, or run configure without the CC option. + + +Macintosh, generic comments: + +The supplied user-interface files (cjpeg.c, djpeg.c, etc) are set up to +provide a Unix-style command line interface. You can use this interface on +the Mac by means of the ccommand() library routine provided by Metrowerks +CodeWarrior or Think C. This is only appropriate for testing the library, +however; to make a user-friendly equivalent of cjpeg/djpeg you'd really want +to develop a Mac-style user interface. There isn't a complete example +available at the moment, but there are some helpful starting points: +1. Sam Bushell's free "To JPEG" applet provides drag-and-drop conversion to +JPEG under System 7 and later. This only illustrates how to use the +compression half of the library, but it does a very nice job of that part. +The CodeWarrior source code is available from http://www.pobox.com/~jsam. +2. Jim Brunner prepared a Mac-style user interface for both compression and +decompression. Unfortunately, it hasn't been updated since IJG v4, and +the library's API has changed considerably since then. Still it may be of +some help, particularly as a guide to compiling the IJG code under Think C. +Jim's code is available from the Info-Mac archives, at sumex-aim.stanford.edu +or mirrors thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx. + +jmemmac.c is the recommended memory manager back end for Macintosh. It uses +NewPtr/DisposePtr instead of malloc/free, and has a Mac-specific +implementation of jpeg_mem_available(). It also creates temporary files that +follow Mac conventions. (That part of the code relies on System-7-or-later OS +functions. See the comments in jmemmac.c if you need to run it on System 6.) +NOTE that USE_MAC_MEMMGR must be defined in jconfig.h to use jmemmac.c. + +You can also use jmemnobs.c, if you don't care about handling images larger +than available memory. If you use any memory manager back end other than +jmemmac.c, we recommend replacing "malloc" and "free" by "NewPtr" and +"DisposePtr", because Mac C libraries often have peculiar implementations of +malloc/free. (For instance, free() may not return the freed space to the +Mac Memory Manager. This is undesirable for the IJG code because jmemmgr.c +already clumps space requests.) + + +Macintosh, Metrowerks CodeWarrior: + +The Unix-command-line-style interface can be used by defining USE_CCOMMAND. +You'll also need to define TWO_FILE_COMMANDLINE to avoid stdin/stdout. +This means that when using the cjpeg/djpeg programs, you'll have to type the +input and output file names in the "Arguments" text-edit box, rather than +using the file radio buttons. (Perhaps USE_FDOPEN or USE_SETMODE would +eliminate the problem, but I haven't heard from anyone who's tried it.) + +On 680x0 Macs, Metrowerks defines type "double" as a 10-byte IEEE extended +float. jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power +of 2. Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint. + +The supplied configuration file jconfig.mac can be used for your jconfig.h; +it includes all the recommended symbol definitions. If you have AppleScript +installed, you can run the supplied script makeproj.mac to create CodeWarrior +project files for the library and the testbed applications, then build the +library and applications. (Thanks to Dan Sears and Don Agro for this nifty +hack, which saves us from trying to maintain CodeWarrior project files as part +of the IJG distribution...) + + +Macintosh, Think C: + +The documentation in Jim Brunner's "JPEG Convert" source code (see above) +includes detailed build instructions for Think C; it's probably somewhat +out of date for the current release, but may be helpful. + +If you want to build the minimal command line version, proceed as follows. +You'll have to prepare project files for the programs; we don't include any +in the distribution since they are not text files. Use the file lists in +any of the supplied makefiles as a guide. Also add the ANSI and Unix C +libraries in a separate segment. You may need to divide the JPEG files into +more than one segment; we recommend dividing compression and decompression +modules. Define USE_CCOMMAND in jconfig.h so that the ccommand() routine is +called. You must also define TWO_FILE_COMMANDLINE because stdin/stdout +don't handle binary data correctly. + +On 680x0 Macs, Think C defines type "double" as a 12-byte IEEE extended float. +jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power of 2. +Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint. + +jconfig.mac should work as a jconfig.h configuration file for Think C, +but the makeproj.mac AppleScript script is specific to CodeWarrior. Sorry. + + +MIPS R3000: + +MIPS's cc version 1.31 has a rather nasty optimization bug. Don't use -O +if you have that compiler version. (Use "cc -V" to check the version.) +Note that the R3000 chip is found in workstations from DEC and others. + + +MS-DOS, generic comments for 16-bit compilers: + +The IJG code is designed to work well in 80x86 "small" or "medium" memory +models (i.e., data pointers are 16 bits unless explicitly declared "far"; +code pointers can be either size). You may be able to use small model to +compile cjpeg or djpeg by itself, but you will probably have to use medium +model for any larger application. This won't make much difference in +performance. You *will* take a noticeable performance hit if you use a +large-data memory model, and you should avoid "huge" model if at all +possible. Be sure that NEED_FAR_POINTERS is defined in jconfig.h if you use +a small-data memory model; be sure it is NOT defined if you use a large-data +model. (The supplied makefiles and jconfig files for Borland and Microsoft C +compile in medium model and define NEED_FAR_POINTERS.) + +The DOS-specific memory manager, jmemdos.c, should be used if possible. +It needs some assembly-code routines which are in jmemdosa.asm; make sure +your makefile assembles that file and includes it in the library. If you +don't have a suitable assembler, you can get pre-assembled object files for +jmemdosa by FTP from ftp.uu.net:/graphics/jpeg/jdosaobj.zip. (DOS-oriented +distributions of the IJG source code often include these object files.) + +When using jmemdos.c, jconfig.h must define USE_MSDOS_MEMMGR and must set +MAX_ALLOC_CHUNK to less than 64K (65520L is a typical value). If your +C library's far-heap malloc() can't allocate blocks that large, reduce +MAX_ALLOC_CHUNK to whatever it can handle. + +If you can't use jmemdos.c for some reason --- for example, because you +don't have an assembler to assemble jmemdosa.asm --- you'll have to fall +back to jmemansi.c or jmemname.c. You'll probably still need to set +MAX_ALLOC_CHUNK in jconfig.h, because most DOS C libraries won't malloc() +more than 64K at a time. IMPORTANT: if you use jmemansi.c or jmemname.c, +you will have to compile in a large-data memory model in order to get the +right stdio library. Too bad. + +wrjpgcom needs to be compiled in large model, because it malloc()s a 64KB +work area to hold the comment text. If your C library's malloc can't +handle that, reduce MAX_COM_LENGTH as necessary in wrjpgcom.c. + +Most MS-DOS compilers treat stdin/stdout as text files, so you must use +two-file command line style. But if your compiler has either fdopen() or +setmode(), you can use one-file style if you like. To do this, define +USE_SETMODE or USE_FDOPEN so that stdin/stdout will be set to binary mode. +(USE_SETMODE seems to work with more DOS compilers than USE_FDOPEN.) You +should test that I/O through stdin/stdout produces the same results as I/O +to explicitly named files... the "make test" procedures in the supplied +makefiles do NOT use stdin/stdout. + + +MS-DOS, generic comments for 32-bit compilers: + +None of the above comments about memory models apply if you are using a +32-bit flat-memory-space environment, such as DJGPP or Watcom C. (And you +should use one if you have it, as performance will be much better than +8086-compatible code!) For flat-memory-space compilers, do NOT define +NEED_FAR_POINTERS, and do NOT use jmemdos.c. Use jmemnobs.c if the +environment supplies adequate virtual memory, otherwise use jmemansi.c or +jmemname.c. + +You'll still need to be careful about binary I/O through stdin/stdout. +See the last paragraph of the previous section. + + +MS-DOS, Borland C: + +Be sure to convert all the source files to DOS text format (CR/LF newlines). +Although Borland C will often work OK with unmodified Unix (LF newlines) +source files, sometimes it will give bogus compile errors. +"Illegal character '#'" is the most common such error. (This is true with +Borland C 3.1, but perhaps is fixed in newer releases.) + +If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE. +jconfig.bcc already includes #define USE_SETMODE to make this work. +(fdopen does not work correctly.) + + +MS-DOS, Microsoft C: + +makefile.mc6 works with Microsoft C, DOS Visual C++, etc. It should only +be used if you want to build a 16-bit (small or medium memory model) program. + +If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE. +jconfig.mc6 already includes #define USE_SETMODE to make this work. +(fdopen does not work correctly.) + +Note that this makefile assumes that the working copy of itself is called +"makefile". If you want to call it something else, say "makefile.mak", +be sure to adjust the dependency line that reads "$(RFILE) : makefile". +Otherwise the make will fail because it doesn't know how to create "makefile". +Worse, some releases of Microsoft's make utilities give an incorrect error +message in this situation. + +Old versions of MS C fail with an "out of macro expansion space" error +because they can't cope with the macro TRACEMS8 (defined in jerror.h). +If this happens to you, the easiest solution is to change TRACEMS8 to +expand to nothing. You'll lose the ability to dump out JPEG coefficient +tables with djpeg -debug -debug, but at least you can compile. + +Original MS C 6.0 is very buggy; it compiles incorrect code unless you turn +off optimization entirely (remove -O from CFLAGS). 6.00A is better, but it +still generates bad code if you enable loop optimizations (-Ol or -Ox). + +MS C 8.0 crashes when compiling jquant1.c with optimization switch /Oo ... +which is on by default. To work around this bug, compile that one file +with /Oo-. + + +Microsoft Windows (all versions), generic comments: + +Some Windows system include files define typedef boolean as "unsigned char". +The IJG code also defines typedef boolean, but we make it an "enum" by default. +This doesn't affect the IJG programs because we don't import those Windows +include files. But if you use the JPEG library in your own program, and some +of your program's files import one definition of boolean while some import the +other, you can get all sorts of mysterious problems. A good preventive step +is to make the IJG library use "unsigned char" for boolean. To do that, +add something like this to your jconfig.h file: + /* Define "boolean" as unsigned char, not enum, per Windows custom */ + #ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ + typedef unsigned char boolean; + #endif + #define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +(This is already in jconfig.vc, by the way.) + +windef.h contains the declarations + #define far + #define FAR far +Since jmorecfg.h tries to define FAR as empty, you may get a compiler +warning if you include both jpeglib.h and windef.h (which windows.h +includes). To suppress the warning, you can put "#ifndef FAR"/"#endif" +around the line "#define FAR" in jmorecfg.h. +(Something like this is already in jmorecfg.h, by the way.) + +When using the library in a Windows application, you will almost certainly +want to modify or replace the error handler module jerror.c, since our +default error handler does a couple of inappropriate things: + 1. it tries to write error and warning messages on stderr; + 2. in event of a fatal error, it exits by calling exit(). + +A simple stopgap solution for problem 1 is to replace the line + fprintf(stderr, "%s\n", buffer); +(in output_message in jerror.c) with + MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK|MB_ICONERROR); +It's highly recommended that you at least do that much, since otherwise +error messages will disappear into nowhere. (Beginning with IJG v6b, this +code is already present in jerror.c; just define USE_WINDOWS_MESSAGEBOX in +jconfig.h to enable it.) + +The proper solution for problem 2 is to return control to your calling +application after a library error. This can be done with the setjmp/longjmp +technique discussed in libjpeg.txt and illustrated in example.c. (NOTE: +some older Windows C compilers provide versions of setjmp/longjmp that +don't actually work under Windows. You may need to use the Windows system +functions Catch and Throw instead.) + +The recommended memory manager under Windows is jmemnobs.c; in other words, +let Windows do any virtual memory management needed. You should NOT use +jmemdos.c nor jmemdosa.asm under Windows. + +For Windows 3.1, we recommend compiling in medium or large memory model; +for newer Windows versions, use a 32-bit flat memory model. (See the MS-DOS +sections above for more info about memory models.) In the 16-bit memory +models only, you'll need to put + #define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ +into jconfig.h to limit allocation chunks to 64Kb. (Without that, you'd +have to use huge memory model, which slows things down unnecessarily.) +jmemnobs.c works without modification in large or flat memory models, but to +use medium model, you need to modify its jpeg_get_large and jpeg_free_large +routines to allocate far memory. In any case, you might like to replace +its calls to malloc and free with direct calls on Windows memory allocation +functions. + +You may also want to modify jdatasrc.c and jdatadst.c to use Windows file +operations rather than fread/fwrite. This is only necessary if your C +compiler doesn't provide a competent implementation of C stdio functions. + +You might want to tweak the RGB_xxx macros in jmorecfg.h so that the library +will accept or deliver color pixels in BGR sample order, not RGB; BGR order +is usually more convenient under Windows. Note that this change will break +the sample applications cjpeg/djpeg, but the library itself works fine. + + +Many people want to convert the IJG library into a DLL. This is reasonably +straightforward, but watch out for the following: + + 1. Don't try to compile as a DLL in small or medium memory model; use +large model, or even better, 32-bit flat model. Many places in the IJG code +assume the address of a local variable is an ordinary (not FAR) pointer; +that isn't true in a medium-model DLL. + + 2. Microsoft C cannot pass file pointers between applications and DLLs. +(See Microsoft Knowledge Base, PSS ID Number Q50336.) So jdatasrc.c and +jdatadst.c don't work if you open a file in your application and then pass +the pointer to the DLL. One workaround is to make jdatasrc.c/jdatadst.c +part of your main application rather than part of the DLL. + + 3. You'll probably need to modify the macros GLOBAL() and EXTERN() to +attach suitable linkage keywords to the exported routine names. Similarly, +you'll want to modify METHODDEF() and JMETHOD() to ensure function pointers +are declared in a way that lets application routines be called back through +the function pointers. These macros are in jmorecfg.h. Typical definitions +for a 16-bit DLL are: + #define GLOBAL(type) type _far _pascal _loadds _export + #define EXTERN(type) extern type _far _pascal _loadds + #define METHODDEF(type) static type _far _pascal + #define JMETHOD(type,methodname,arglist) \ + type (_far _pascal *methodname) arglist +For a 32-bit DLL you may want something like + #define GLOBAL(type) __declspec(dllexport) type + #define EXTERN(type) extern __declspec(dllexport) type +Although not all the GLOBAL routines are actually intended to be called by +the application, the performance cost of making them all DLL entry points is +negligible. + +The unmodified IJG library presents a very C-specific application interface, +so the resulting DLL is only usable from C or C++ applications. There has +been some talk of writing wrapper code that would present a simpler interface +usable from other languages, such as Visual Basic. This is on our to-do list +but hasn't been very high priority --- any volunteers out there? + + +Microsoft Windows, Borland C: + +The provided jconfig.bcc should work OK in a 32-bit Windows environment, +but you'll need to tweak it in a 16-bit environment (you'd need to define +NEED_FAR_POINTERS and MAX_ALLOC_CHUNK). Beware that makefile.bcc will need +alteration if you want to use it for Windows --- in particular, you should +use jmemnobs.c not jmemdos.c under Windows. + +Borland C++ 4.5 fails with an internal compiler error when trying to compile +jdmerge.c in 32-bit mode. If enough people complain, perhaps Borland will fix +it. In the meantime, the simplest known workaround is to add a redundant +definition of the variable range_limit in h2v1_merged_upsample(), at the head +of the block that handles odd image width (about line 268 in v6 jdmerge.c): + /* If image width is odd, do the last output column separately */ + if (cinfo->output_width & 1) { + register JSAMPLE * range_limit = cinfo->sample_range_limit; /* ADD THIS */ + cb = GETJSAMPLE(*inptr1); +Pretty bizarre, especially since the very similar routine h2v2_merged_upsample +doesn't trigger the bug. +Recent reports suggest that this bug does not occur with "bcc32a" (the +Pentium-optimized version of the compiler). + +Another report from a user of Borland C 4.5 was that incorrect code (leading +to a color shift in processed images) was produced if any of the following +optimization switch combinations were used: + -Ot -Og + -Ot -Op + -Ot -Om +So try backing off on optimization if you see such a problem. (Are there +several different releases all numbered "4.5"??) + + +Microsoft Windows, Microsoft Visual C++: + +jconfig.vc should work OK with any Microsoft compiler for a 32-bit memory +model. makefile.vc is intended for command-line use. (If you are using +the Developer Studio environment, you may prefer the DevStudio project +files; see below.) + +IJG JPEG 7 adds extern "C" to jpeglib.h. This avoids the need to put +extern "C" { ... } around #include "jpeglib.h" in your C++ application. +You can also force VC++ to treat the library as C++ code by renaming +all the *.c files to *.cpp (and adjusting the makefile to match). +In this case you also need to define the symbol DONT_USE_EXTERN_C in +the configuration to prevent jpeglib.h from using extern "C". + + +Microsoft Windows, Microsoft Visual C++ 6 Developer Studio: + +We include makefiles that should work as project files in DevStudio 6.0 or +later. There is a library makefile that builds the IJG library as a static +Win32 library, and application makefiles that build the sample applications +as Win32 console applications. (Even if you only want the library, we +recommend building the applications so that you can run the self-test.) + +To use: +1. Open the command prompt, change to the main directory and execute the + command line + NMAKE /f makefile.vc setup-vc6 + This will move jconfig.vc to jconfig.h and makefiles to project files. + (Note that the renaming is critical!) +2. Open the workspace file jpeg.dsw, build the library project. + (If you are using DevStudio more recent than 6.0, you'll probably + get a message saying that the project files are being updated.) +3. Open the workspace file apps.dsw, build the application projects. +4. To perform the self-test, execute the command line + NMAKE /f makefile.vc test-build +5. Move the application .exe files from `app`\Release to an + appropriate location on your path. + + +Microsoft Windows, Microsoft Visual C++ 2010 Developer Studio (v10): + +We include makefiles that should work as project files in Visual Studio +2010 or later. There is a library makefile that builds the IJG library +as a static Win32 library, and application makefiles that build the sample +applications as Win32 console applications. (Even if you only want the +library, we recommend building the applications so that you can run the +self-test.) + +To use: +1. Open the command prompt, change to the main directory and execute the + command line + NMAKE /f makefile.vc setup-v10 + This will move jconfig.vc to jconfig.h and makefiles to project files. + (Note that the renaming is critical!) +2. Open the solution file jpeg.sln, build the library project. + (If you are using Visual Studio more recent than 2010 (v10), you'll + probably get a message saying that the project files are being updated.) +3. Open the solution file apps.sln, build the application projects. +4. To perform the self-test, execute the command line + NMAKE /f makefile.vc test-build +5. Move the application .exe files from `app`\Release to an + appropriate location on your path. + +Note: +There seems to be an optimization bug in the compiler which causes the +self-test to fail with the color quantization option. +We have disabled optimization for the file jquant2.c in the library +project file which causes the self-test to pass properly. + + +OS/2, Borland C++: + +Watch out for optimization bugs in older Borland compilers; you may need +to back off the optimization switch settings. See the comments in +makefile.bcc. + + +SGI: + +On some SGI systems, you may need to set "AR2= ar -ts" in the Makefile. +If you are using configure, you can do this by saying + ./configure RANLIB='ar -ts' +This change is not needed on all SGIs. Use it only if the make fails at the +stage of linking the completed programs. + +On the MIPS R4000 architecture (Indy, etc.), the compiler option "-mips2" +reportedly speeds up the float DCT method substantially, enough to make it +faster than the default int method (but still slower than the fast int +method). If you use -mips2, you may want to alter the default DCT method to +be float. To do this, put "#define JDCT_DEFAULT JDCT_FLOAT" in jconfig.h. + + +VMS: + +On an Alpha/VMS system with MMS, be sure to use the "/Marco=Alpha=1" +qualifier with MMS when building the JPEG package. + +VAX/VMS v5.5-1 may have problems with the test step of the build procedure +reporting differences when it compares the original and test images. If the +error points to the last block of the files, it is most likely bogus and may +be safely ignored. It seems to be because the files are Stream_LF and +Backup/Compare has difficulty with the (presumably) null padded files. +This problem was not observed on VAX/VMS v6.1 or AXP/VMS v6.1. diff --git a/src/SDL2/external/jpeg-9/jaricom.c b/src/SDL2/external/jpeg-9/jaricom.c new file mode 100644 index 000000000..690068861 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jaricom.c @@ -0,0 +1,153 @@ +/* + * jaricom.c + * + * Developed 1997-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains probability estimation tables for common use in + * arithmetic entropy encoding and decoding routines. + * + * This data represents Table D.3 in the JPEG spec (D.2 in the draft), + * ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81, and Table 24 + * in the JBIG spec, ISO/IEC IS 11544 and CCITT Recommendation ITU-T T.82. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +/* The following #define specifies the packing of the four components + * into the compact INT32 representation. + * Note that this formula must match the actual arithmetic encoder + * and decoder implementation. The implementation has to be changed + * if this formula is changed. + * The current organization is leaned on Markus Kuhn's JBIG + * implementation (jbig_tab.c). + */ + +#define V(i,a,b,c,d) (((INT32)a << 16) | ((INT32)c << 8) | ((INT32)d << 7) | b) + +const INT32 jpeg_aritab[113+1] = { +/* + * Index, Qe_Value, Next_Index_LPS, Next_Index_MPS, Switch_MPS + */ + V( 0, 0x5a1d, 1, 1, 1 ), + V( 1, 0x2586, 14, 2, 0 ), + V( 2, 0x1114, 16, 3, 0 ), + V( 3, 0x080b, 18, 4, 0 ), + V( 4, 0x03d8, 20, 5, 0 ), + V( 5, 0x01da, 23, 6, 0 ), + V( 6, 0x00e5, 25, 7, 0 ), + V( 7, 0x006f, 28, 8, 0 ), + V( 8, 0x0036, 30, 9, 0 ), + V( 9, 0x001a, 33, 10, 0 ), + V( 10, 0x000d, 35, 11, 0 ), + V( 11, 0x0006, 9, 12, 0 ), + V( 12, 0x0003, 10, 13, 0 ), + V( 13, 0x0001, 12, 13, 0 ), + V( 14, 0x5a7f, 15, 15, 1 ), + V( 15, 0x3f25, 36, 16, 0 ), + V( 16, 0x2cf2, 38, 17, 0 ), + V( 17, 0x207c, 39, 18, 0 ), + V( 18, 0x17b9, 40, 19, 0 ), + V( 19, 0x1182, 42, 20, 0 ), + V( 20, 0x0cef, 43, 21, 0 ), + V( 21, 0x09a1, 45, 22, 0 ), + V( 22, 0x072f, 46, 23, 0 ), + V( 23, 0x055c, 48, 24, 0 ), + V( 24, 0x0406, 49, 25, 0 ), + V( 25, 0x0303, 51, 26, 0 ), + V( 26, 0x0240, 52, 27, 0 ), + V( 27, 0x01b1, 54, 28, 0 ), + V( 28, 0x0144, 56, 29, 0 ), + V( 29, 0x00f5, 57, 30, 0 ), + V( 30, 0x00b7, 59, 31, 0 ), + V( 31, 0x008a, 60, 32, 0 ), + V( 32, 0x0068, 62, 33, 0 ), + V( 33, 0x004e, 63, 34, 0 ), + V( 34, 0x003b, 32, 35, 0 ), + V( 35, 0x002c, 33, 9, 0 ), + V( 36, 0x5ae1, 37, 37, 1 ), + V( 37, 0x484c, 64, 38, 0 ), + V( 38, 0x3a0d, 65, 39, 0 ), + V( 39, 0x2ef1, 67, 40, 0 ), + V( 40, 0x261f, 68, 41, 0 ), + V( 41, 0x1f33, 69, 42, 0 ), + V( 42, 0x19a8, 70, 43, 0 ), + V( 43, 0x1518, 72, 44, 0 ), + V( 44, 0x1177, 73, 45, 0 ), + V( 45, 0x0e74, 74, 46, 0 ), + V( 46, 0x0bfb, 75, 47, 0 ), + V( 47, 0x09f8, 77, 48, 0 ), + V( 48, 0x0861, 78, 49, 0 ), + V( 49, 0x0706, 79, 50, 0 ), + V( 50, 0x05cd, 48, 51, 0 ), + V( 51, 0x04de, 50, 52, 0 ), + V( 52, 0x040f, 50, 53, 0 ), + V( 53, 0x0363, 51, 54, 0 ), + V( 54, 0x02d4, 52, 55, 0 ), + V( 55, 0x025c, 53, 56, 0 ), + V( 56, 0x01f8, 54, 57, 0 ), + V( 57, 0x01a4, 55, 58, 0 ), + V( 58, 0x0160, 56, 59, 0 ), + V( 59, 0x0125, 57, 60, 0 ), + V( 60, 0x00f6, 58, 61, 0 ), + V( 61, 0x00cb, 59, 62, 0 ), + V( 62, 0x00ab, 61, 63, 0 ), + V( 63, 0x008f, 61, 32, 0 ), + V( 64, 0x5b12, 65, 65, 1 ), + V( 65, 0x4d04, 80, 66, 0 ), + V( 66, 0x412c, 81, 67, 0 ), + V( 67, 0x37d8, 82, 68, 0 ), + V( 68, 0x2fe8, 83, 69, 0 ), + V( 69, 0x293c, 84, 70, 0 ), + V( 70, 0x2379, 86, 71, 0 ), + V( 71, 0x1edf, 87, 72, 0 ), + V( 72, 0x1aa9, 87, 73, 0 ), + V( 73, 0x174e, 72, 74, 0 ), + V( 74, 0x1424, 72, 75, 0 ), + V( 75, 0x119c, 74, 76, 0 ), + V( 76, 0x0f6b, 74, 77, 0 ), + V( 77, 0x0d51, 75, 78, 0 ), + V( 78, 0x0bb6, 77, 79, 0 ), + V( 79, 0x0a40, 77, 48, 0 ), + V( 80, 0x5832, 80, 81, 1 ), + V( 81, 0x4d1c, 88, 82, 0 ), + V( 82, 0x438e, 89, 83, 0 ), + V( 83, 0x3bdd, 90, 84, 0 ), + V( 84, 0x34ee, 91, 85, 0 ), + V( 85, 0x2eae, 92, 86, 0 ), + V( 86, 0x299a, 93, 87, 0 ), + V( 87, 0x2516, 86, 71, 0 ), + V( 88, 0x5570, 88, 89, 1 ), + V( 89, 0x4ca9, 95, 90, 0 ), + V( 90, 0x44d9, 96, 91, 0 ), + V( 91, 0x3e22, 97, 92, 0 ), + V( 92, 0x3824, 99, 93, 0 ), + V( 93, 0x32b4, 99, 94, 0 ), + V( 94, 0x2e17, 93, 86, 0 ), + V( 95, 0x56a8, 95, 96, 1 ), + V( 96, 0x4f46, 101, 97, 0 ), + V( 97, 0x47e5, 102, 98, 0 ), + V( 98, 0x41cf, 103, 99, 0 ), + V( 99, 0x3c3d, 104, 100, 0 ), + V( 100, 0x375e, 99, 93, 0 ), + V( 101, 0x5231, 105, 102, 0 ), + V( 102, 0x4c0f, 106, 103, 0 ), + V( 103, 0x4639, 107, 104, 0 ), + V( 104, 0x415e, 103, 99, 0 ), + V( 105, 0x5627, 105, 106, 1 ), + V( 106, 0x50e7, 108, 107, 0 ), + V( 107, 0x4b85, 109, 103, 0 ), + V( 108, 0x5597, 110, 109, 0 ), + V( 109, 0x504f, 111, 107, 0 ), + V( 110, 0x5a10, 110, 111, 1 ), + V( 111, 0x5522, 112, 109, 0 ), + V( 112, 0x59eb, 112, 111, 1 ), +/* + * This last entry is used for fixed probability estimate of 0.5 + * as suggested in Section 10.3 Table 5 of ITU-T Rec. T.851. + */ + V( 113, 0x5a1d, 113, 113, 0 ) +}; diff --git a/src/SDL2/external/jpeg-9/jcapimin.c b/src/SDL2/external/jpeg-9/jcapimin.c new file mode 100644 index 000000000..639ce86f4 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcapimin.c @@ -0,0 +1,288 @@ +/* + * jcapimin.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2003-2010 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the compression half + * of the JPEG library. These are the "minimum" API routines that may be + * needed in either the normal full-compression case or the transcoding-only + * case. + * + * Most of the routines intended to be called directly by an application + * are in this file or in jcapistd.c. But also see jcparam.c for + * parameter-setup helper routines, jcomapi.c for routines shared by + * compression and decompression, and jctrans.c for the transcoding case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Initialization of a JPEG compression object. + * The error manager must already be set up (in case memory manager fails). + */ + +GLOBAL(void) +jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize) +{ + int i; + + /* Guard against version mismatches between library and caller. */ + cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ + if (version != JPEG_LIB_VERSION) + ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); + if (structsize != SIZEOF(struct jpeg_compress_struct)) + ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, + (int) SIZEOF(struct jpeg_compress_struct), (int) structsize); + + /* For debugging purposes, we zero the whole master structure. + * But the application has already set the err pointer, and may have set + * client_data, so we have to save and restore those fields. + * Note: if application hasn't set client_data, tools like Purify may + * complain here. + */ + { + struct jpeg_error_mgr * err = cinfo->err; + void * client_data = cinfo->client_data; /* ignore Purify complaint here */ + MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct)); + cinfo->err = err; + cinfo->client_data = client_data; + } + cinfo->is_decompressor = FALSE; + + /* Initialize a memory manager instance for this object */ + jinit_memory_mgr((j_common_ptr) cinfo); + + /* Zero out pointers to permanent structures. */ + cinfo->progress = NULL; + cinfo->dest = NULL; + + cinfo->comp_info = NULL; + + for (i = 0; i < NUM_QUANT_TBLS; i++) { + cinfo->quant_tbl_ptrs[i] = NULL; + cinfo->q_scale_factor[i] = 100; + } + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + cinfo->dc_huff_tbl_ptrs[i] = NULL; + cinfo->ac_huff_tbl_ptrs[i] = NULL; + } + + /* Must do it here for emit_dqt in case jpeg_write_tables is used */ + cinfo->block_size = DCTSIZE; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + + cinfo->script_space = NULL; + + cinfo->input_gamma = 1.0; /* in case application forgets */ + + /* OK, I'm ready */ + cinfo->global_state = CSTATE_START; +} + + +/* + * Destruction of a JPEG compression object + */ + +GLOBAL(void) +jpeg_destroy_compress (j_compress_ptr cinfo) +{ + jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Abort processing of a JPEG compression operation, + * but don't destroy the object itself. + */ + +GLOBAL(void) +jpeg_abort_compress (j_compress_ptr cinfo) +{ + jpeg_abort((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Forcibly suppress or un-suppress all quantization and Huffman tables. + * Marks all currently defined tables as already written (if suppress) + * or not written (if !suppress). This will control whether they get emitted + * by a subsequent jpeg_start_compress call. + * + * This routine is exported for use by applications that want to produce + * abbreviated JPEG datastreams. It logically belongs in jcparam.c, but + * since it is called by jpeg_start_compress, we put it here --- otherwise + * jcparam.o would be linked whether the application used it or not. + */ + +GLOBAL(void) +jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress) +{ + int i; + JQUANT_TBL * qtbl; + JHUFF_TBL * htbl; + + for (i = 0; i < NUM_QUANT_TBLS; i++) { + if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL) + qtbl->sent_table = suppress; + } + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL) + htbl->sent_table = suppress; + if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL) + htbl->sent_table = suppress; + } +} + + +/* + * Finish JPEG compression. + * + * If a multipass operating mode was selected, this may do a great deal of + * work including most of the actual output. + */ + +GLOBAL(void) +jpeg_finish_compress (j_compress_ptr cinfo) +{ + JDIMENSION iMCU_row; + + if (cinfo->global_state == CSTATE_SCANNING || + cinfo->global_state == CSTATE_RAW_OK) { + /* Terminate first pass */ + if (cinfo->next_scanline < cinfo->image_height) + ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); + (*cinfo->master->finish_pass) (cinfo); + } else if (cinfo->global_state != CSTATE_WRCOEFS) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Perform any remaining passes */ + while (! cinfo->master->is_last_pass) { + (*cinfo->master->prepare_for_pass) (cinfo); + for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) { + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) iMCU_row; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + /* We bypass the main controller and invoke coef controller directly; + * all work is being done from the coefficient buffer. + */ + if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + } + (*cinfo->master->finish_pass) (cinfo); + } + /* Write EOI, do final cleanup */ + (*cinfo->marker->write_file_trailer) (cinfo); + (*cinfo->dest->term_destination) (cinfo); + /* We can use jpeg_abort to release memory and reset global_state */ + jpeg_abort((j_common_ptr) cinfo); +} + + +/* + * Write a special marker. + * This is only recommended for writing COM or APPn markers. + * Must be called after jpeg_start_compress() and before + * first call to jpeg_write_scanlines() or jpeg_write_raw_data(). + */ + +GLOBAL(void) +jpeg_write_marker (j_compress_ptr cinfo, int marker, + const JOCTET *dataptr, unsigned int datalen) +{ + JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val)); + + if (cinfo->next_scanline != 0 || + (cinfo->global_state != CSTATE_SCANNING && + cinfo->global_state != CSTATE_RAW_OK && + cinfo->global_state != CSTATE_WRCOEFS)) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); + write_marker_byte = cinfo->marker->write_marker_byte; /* copy for speed */ + while (datalen--) { + (*write_marker_byte) (cinfo, *dataptr); + dataptr++; + } +} + +/* Same, but piecemeal. */ + +GLOBAL(void) +jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen) +{ + if (cinfo->next_scanline != 0 || + (cinfo->global_state != CSTATE_SCANNING && + cinfo->global_state != CSTATE_RAW_OK && + cinfo->global_state != CSTATE_WRCOEFS)) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); +} + +GLOBAL(void) +jpeg_write_m_byte (j_compress_ptr cinfo, int val) +{ + (*cinfo->marker->write_marker_byte) (cinfo, val); +} + + +/* + * Alternate compression function: just write an abbreviated table file. + * Before calling this, all parameters and a data destination must be set up. + * + * To produce a pair of files containing abbreviated tables and abbreviated + * image data, one would proceed as follows: + * + * initialize JPEG object + * set JPEG parameters + * set destination to table file + * jpeg_write_tables(cinfo); + * set destination to image file + * jpeg_start_compress(cinfo, FALSE); + * write data... + * jpeg_finish_compress(cinfo); + * + * jpeg_write_tables has the side effect of marking all tables written + * (same as jpeg_suppress_tables(..., TRUE)). Thus a subsequent start_compress + * will not re-emit the tables unless it is passed write_all_tables=TRUE. + */ + +GLOBAL(void) +jpeg_write_tables (j_compress_ptr cinfo) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Initialize the marker writer ... bit of a crock to do it here. */ + jinit_marker_writer(cinfo); + /* Write them tables! */ + (*cinfo->marker->write_tables_only) (cinfo); + /* And clean up. */ + (*cinfo->dest->term_destination) (cinfo); + /* + * In library releases up through v6a, we called jpeg_abort() here to free + * any working memory allocated by the destination manager and marker + * writer. Some applications had a problem with that: they allocated space + * of their own from the library memory manager, and didn't want it to go + * away during write_tables. So now we do nothing. This will cause a + * memory leak if an app calls write_tables repeatedly without doing a full + * compression cycle or otherwise resetting the JPEG object. However, that + * seems less bad than unexpectedly freeing memory in the normal case. + * An app that prefers the old behavior can call jpeg_abort for itself after + * each call to jpeg_write_tables(). + */ +} diff --git a/src/SDL2/external/jpeg-9/jcapistd.c b/src/SDL2/external/jpeg-9/jcapistd.c new file mode 100644 index 000000000..c0320b1b1 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcapistd.c @@ -0,0 +1,161 @@ +/* + * jcapistd.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the compression half + * of the JPEG library. These are the "standard" API routines that are + * used in the normal full-compression case. They are not used by a + * transcoding-only application. Note that if an application links in + * jpeg_start_compress, it will end up linking in the entire compressor. + * We thus must separate this file from jcapimin.c to avoid linking the + * whole compression library into a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Compression initialization. + * Before calling this, all parameters and a data destination must be set up. + * + * We require a write_all_tables parameter as a failsafe check when writing + * multiple datastreams from the same compression object. Since prior runs + * will have left all the tables marked sent_table=TRUE, a subsequent run + * would emit an abbreviated stream (no tables) by default. This may be what + * is wanted, but for safety's sake it should not be the default behavior: + * programmers should have to make a deliberate choice to emit abbreviated + * images. Therefore the documentation and examples should encourage people + * to pass write_all_tables=TRUE; then it will take active thought to do the + * wrong thing. + */ + +GLOBAL(void) +jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (write_all_tables) + jpeg_suppress_tables(cinfo, FALSE); /* mark all tables to be written */ + + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Perform master selection of active modules */ + jinit_compress_master(cinfo); + /* Set up for the first pass */ + (*cinfo->master->prepare_for_pass) (cinfo); + /* Ready for application to drive first pass through jpeg_write_scanlines + * or jpeg_write_raw_data. + */ + cinfo->next_scanline = 0; + cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING); +} + + +/* + * Write some scanlines of data to the JPEG compressor. + * + * The return value will be the number of lines actually written. + * This should be less than the supplied num_lines only in case that + * the data destination module has requested suspension of the compressor, + * or if more than image_height scanlines are passed in. + * + * Note: we warn about excess calls to jpeg_write_scanlines() since + * this likely signals an application programmer error. However, + * excess scanlines passed in the last valid call are *silently* ignored, + * so that the application need not adjust num_lines for end-of-image + * when using a multiple-scanline buffer. + */ + +GLOBAL(JDIMENSION) +jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines, + JDIMENSION num_lines) +{ + JDIMENSION row_ctr, rows_left; + + if (cinfo->global_state != CSTATE_SCANNING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->next_scanline >= cinfo->image_height) + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->next_scanline; + cinfo->progress->pass_limit = (long) cinfo->image_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Give master control module another chance if this is first call to + * jpeg_write_scanlines. This lets output of the frame/scan headers be + * delayed so that application can write COM, etc, markers between + * jpeg_start_compress and jpeg_write_scanlines. + */ + if (cinfo->master->call_pass_startup) + (*cinfo->master->pass_startup) (cinfo); + + /* Ignore any extra scanlines at bottom of image. */ + rows_left = cinfo->image_height - cinfo->next_scanline; + if (num_lines > rows_left) + num_lines = rows_left; + + row_ctr = 0; + (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines); + cinfo->next_scanline += row_ctr; + return row_ctr; +} + + +/* + * Alternate entry point to write raw data. + * Processes exactly one iMCU row per call, unless suspended. + */ + +GLOBAL(JDIMENSION) +jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data, + JDIMENSION num_lines) +{ + JDIMENSION lines_per_iMCU_row; + + if (cinfo->global_state != CSTATE_RAW_OK) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->next_scanline >= cinfo->image_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->next_scanline; + cinfo->progress->pass_limit = (long) cinfo->image_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Give master control module another chance if this is first call to + * jpeg_write_raw_data. This lets output of the frame/scan headers be + * delayed so that application can write COM, etc, markers between + * jpeg_start_compress and jpeg_write_raw_data. + */ + if (cinfo->master->call_pass_startup) + (*cinfo->master->pass_startup) (cinfo); + + /* Verify that at least one iMCU row has been passed. */ + lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE; + if (num_lines < lines_per_iMCU_row) + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* Directly compress the row. */ + if (! (*cinfo->coef->compress_data) (cinfo, data)) { + /* If compressor did not consume the whole row, suspend processing. */ + return 0; + } + + /* OK, we processed one iMCU row. */ + cinfo->next_scanline += lines_per_iMCU_row; + return lines_per_iMCU_row; +} diff --git a/src/SDL2/external/jpeg-9/jcarith.c b/src/SDL2/external/jpeg-9/jcarith.c new file mode 100644 index 000000000..a7f9ff7ac --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcarith.c @@ -0,0 +1,943 @@ +/* + * jcarith.c + * + * Developed 1997-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains portable arithmetic entropy encoding routines for JPEG + * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81). + * + * Both sequential and progressive modes are supported in this single module. + * + * Suspension is not currently supported in this module. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Expanded entropy encoder object for arithmetic encoding. */ + +typedef struct { + struct jpeg_entropy_encoder pub; /* public fields */ + + INT32 c; /* C register, base of coding interval, layout as in sec. D.1.3 */ + INT32 a; /* A register, normalized size of coding interval */ + INT32 sc; /* counter for stacked 0xFF values which might overflow */ + INT32 zc; /* counter for pending 0x00 output values which might * + * be discarded at the end ("Pacman" termination) */ + int ct; /* bit shift counter, determines when next byte will be written */ + int buffer; /* buffer for most recent output byte != 0xFF */ + + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ + int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */ + + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + int next_restart_num; /* next restart number to write (0-7) */ + + /* Pointers to statistics areas (these workspaces have image lifespan) */ + unsigned char * dc_stats[NUM_ARITH_TBLS]; + unsigned char * ac_stats[NUM_ARITH_TBLS]; + + /* Statistics bin for coding with fixed probability 0.5 */ + unsigned char fixed_bin[4]; +} arith_entropy_encoder; + +typedef arith_entropy_encoder * arith_entropy_ptr; + +/* The following two definitions specify the allocation chunk size + * for the statistics area. + * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least + * 49 statistics bins for DC, and 245 statistics bins for AC coding. + * + * We use a compact representation with 1 byte per statistics bin, + * thus the numbers directly represent byte sizes. + * This 1 byte per statistics bin contains the meaning of the MPS + * (more probable symbol) in the highest bit (mask 0x80), and the + * index into the probability estimation state machine table + * in the lower bits (mask 0x7F). + */ + +#define DC_STAT_BINS 64 +#define AC_STAT_BINS 256 + +/* NOTE: Uncomment the following #define if you want to use the + * given formula for calculating the AC conditioning parameter Kx + * for spectral selection progressive coding in section G.1.3.2 + * of the spec (Kx = Kmin + SRL (8 + Se - Kmin) 4). + * Although the spec and P&M authors claim that this "has proven + * to give good results for 8 bit precision samples", I'm not + * convinced yet that this is really beneficial. + * Early tests gave only very marginal compression enhancements + * (a few - around 5 or so - bytes even for very large files), + * which would turn out rather negative if we'd suppress the + * DAC (Define Arithmetic Conditioning) marker segments for + * the default parameters in the future. + * Note that currently the marker writing module emits 12-byte + * DAC segments for a full-component scan in a color image. + * This is not worth worrying about IMHO. However, since the + * spec defines the default values to be used if the tables + * are omitted (unlike Huffman tables, which are required + * anyway), one might optimize this behaviour in the future, + * and then it would be disadvantageous to use custom tables if + * they don't provide sufficient gain to exceed the DAC size. + * + * On the other hand, I'd consider it as a reasonable result + * that the conditioning has no significant influence on the + * compression performance. This means that the basic + * statistical model is already rather stable. + * + * Thus, at the moment, we use the default conditioning values + * anyway, and do not use the custom formula. + * +#define CALCULATE_SPECTRAL_CONDITIONING + */ + +/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. + * We assume that int right shift is unsigned if INT32 right shift is, + * which should be safe. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS int ishift_temp; +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +LOCAL(void) +emit_byte (int val, j_compress_ptr cinfo) +/* Write next output byte; we do not support suspension in this module. */ +{ + struct jpeg_destination_mgr * dest = cinfo->dest; + + *dest->next_output_byte++ = (JOCTET) val; + if (--dest->free_in_buffer == 0) + if (! (*dest->empty_output_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); +} + + +/* + * Finish up at the end of an arithmetic-compressed scan. + */ + +METHODDEF(void) +finish_pass (j_compress_ptr cinfo) +{ + arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + INT32 temp; + + /* Section D.1.8: Termination of encoding */ + + /* Find the e->c in the coding interval with the largest + * number of trailing zero bits */ + if ((temp = (e->a - 1 + e->c) & 0xFFFF0000L) < e->c) + e->c = temp + 0x8000L; + else + e->c = temp; + /* Send remaining bytes to output */ + e->c <<= e->ct; + if (e->c & 0xF8000000L) { + /* One final overflow has to be handled */ + if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer + 1, cinfo); + if (e->buffer + 1 == 0xFF) + emit_byte(0x00, cinfo); + } + e->zc += e->sc; /* carry-over converts stacked 0xFF bytes to 0x00 */ + e->sc = 0; + } else { + if (e->buffer == 0) + ++e->zc; + else if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer, cinfo); + } + if (e->sc) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + do { + emit_byte(0xFF, cinfo); + emit_byte(0x00, cinfo); + } while (--e->sc); + } + } + /* Output final bytes only if they are not 0x00 */ + if (e->c & 0x7FFF800L) { + if (e->zc) /* output final pending zero bytes */ + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte((e->c >> 19) & 0xFF, cinfo); + if (((e->c >> 19) & 0xFF) == 0xFF) + emit_byte(0x00, cinfo); + if (e->c & 0x7F800L) { + emit_byte((e->c >> 11) & 0xFF, cinfo); + if (((e->c >> 11) & 0xFF) == 0xFF) + emit_byte(0x00, cinfo); + } + } +} + + +/* + * The core arithmetic encoding routine (common in JPEG and JBIG). + * This needs to go as fast as possible. + * Machine-dependent optimization facilities + * are not utilized in this portable implementation. + * However, this code should be fairly efficient and + * may be a good base for further optimizations anyway. + * + * Parameter 'val' to be encoded may be 0 or 1 (binary decision). + * + * Note: I've added full "Pacman" termination support to the + * byte output routines, which is equivalent to the optional + * Discard_final_zeros procedure (Figure D.15) in the spec. + * Thus, we always produce the shortest possible output + * stream compliant to the spec (no trailing zero bytes, + * except for FF stuffing). + * + * I've also introduced a new scheme for accessing + * the probability estimation state machine table, + * derived from Markus Kuhn's JBIG implementation. + */ + +LOCAL(void) +arith_encode (j_compress_ptr cinfo, unsigned char *st, int val) +{ + register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + register unsigned char nl, nm; + register INT32 qe, temp; + register int sv; + + /* Fetch values from our compact representation of Table D.3(D.2): + * Qe values and probability estimation state machine + */ + sv = *st; + qe = jpeg_aritab[sv & 0x7F]; /* => Qe_Value */ + nl = qe & 0xFF; qe >>= 8; /* Next_Index_LPS + Switch_MPS */ + nm = qe & 0xFF; qe >>= 8; /* Next_Index_MPS */ + + /* Encode & estimation procedures per sections D.1.4 & D.1.5 */ + e->a -= qe; + if (val != (sv >> 7)) { + /* Encode the less probable symbol */ + if (e->a >= qe) { + /* If the interval size (qe) for the less probable symbol (LPS) + * is larger than the interval size for the MPS, then exchange + * the two symbols for coding efficiency, otherwise code the LPS + * as usual: */ + e->c += e->a; + e->a = qe; + } + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + } else { + /* Encode the more probable symbol */ + if (e->a >= 0x8000L) + return; /* A >= 0x8000 -> ready, no renormalization required */ + if (e->a < qe) { + /* If the interval size (qe) for the less probable symbol (LPS) + * is larger than the interval size for the MPS, then exchange + * the two symbols for coding efficiency: */ + e->c += e->a; + e->a = qe; + } + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } + + /* Renormalization & data output per section D.1.6 */ + do { + e->a <<= 1; + e->c <<= 1; + if (--e->ct == 0) { + /* Another byte is ready for output */ + temp = e->c >> 19; + if (temp > 0xFF) { + /* Handle overflow over all stacked 0xFF bytes */ + if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer + 1, cinfo); + if (e->buffer + 1 == 0xFF) + emit_byte(0x00, cinfo); + } + e->zc += e->sc; /* carry-over converts stacked 0xFF bytes to 0x00 */ + e->sc = 0; + /* Note: The 3 spacer bits in the C register guarantee + * that the new buffer byte can't be 0xFF here + * (see page 160 in the P&M JPEG book). */ + e->buffer = temp & 0xFF; /* new output byte, might overflow later */ + } else if (temp == 0xFF) { + ++e->sc; /* stack 0xFF byte (which might overflow later) */ + } else { + /* Output all stacked 0xFF bytes, they will not overflow any more */ + if (e->buffer == 0) + ++e->zc; + else if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer, cinfo); + } + if (e->sc) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + do { + emit_byte(0xFF, cinfo); + emit_byte(0x00, cinfo); + } while (--e->sc); + } + e->buffer = temp & 0xFF; /* new output byte (can still overflow) */ + } + e->c &= 0x7FFFFL; + e->ct += 8; + } + } while (e->a < 0x8000L); +} + + +/* + * Emit a restart marker & resynchronize predictions. + */ + +LOCAL(void) +emit_restart (j_compress_ptr cinfo, int restart_num) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci; + jpeg_component_info * compptr; + + finish_pass(cinfo); + + emit_byte(0xFF, cinfo); + emit_byte(JPEG_RST0 + restart_num, cinfo); + + /* Re-initialize statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS); + /* Reset DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS); + } + } + + /* Reset arithmetic encoding variables */ + entropy->c = 0; + entropy->a = 0x10000L; + entropy->sc = 0; + entropy->zc = 0; + entropy->ct = 11; + entropy->buffer = -1; /* empty */ +} + + +/* + * MCU encoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl; + int v, v2, m; + ISHIFT_TEMPS + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; + + /* Compute the DC value after the required point transform by Al. + * This is simply an arithmetic right shift. + */ + m = IRIGHT_SHIFT((int) ((*block)[0]), cinfo->Al); + + /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */ + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.4: Encode_DC_DIFF */ + if ((v = m - entropy->last_dc_val[ci]) == 0) { + arith_encode(cinfo, st, 0); + entropy->dc_context[ci] = 0; /* zero diff category */ + } else { + entropy->last_dc_val[ci] = m; + arith_encode(cinfo, st, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, st + 1, 0); /* Table F.4: SS = S0 + 1 */ + st += 2; /* Table F.4: SP = S0 + 2 */ + entropy->dc_context[ci] = 4; /* small positive diff category */ + } else { + v = -v; + arith_encode(cinfo, st + 1, 1); /* Table F.4: SS = S0 + 1 */ + st += 3; /* Table F.4: SN = S0 + 3 */ + entropy->dc_context[ci] = 8; /* small negative diff category */ + } + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + arith_encode(cinfo, st, 0); + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] += 8; /* large diff category */ + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + } + + return TRUE; +} + + +/* + * MCU encoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int tbl, k, ke; + int v, v2, m; + const int * natural_order; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */ + + /* Establish EOB (end-of-block) index */ + ke = cinfo->Se; + do { + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if ((v = (*block)[natural_order[ke]]) >= 0) { + if (v >>= cinfo->Al) break; + } else { + v = -v; + if (v >>= cinfo->Al) break; + } + } while (--ke); + + /* Figure F.5: Encode_AC_Coefficients */ + for (k = cinfo->Ss - 1; k < ke;) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 0); /* EOB decision */ + for (;;) { + if ((v = (*block)[natural_order[++k]]) >= 0) { + if (v >>= cinfo->Al) { + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 0); + break; + } + } else { + v = -v; + if (v >>= cinfo->Al) { + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 1); + break; + } + } + arith_encode(cinfo, st + 1, 0); + st += 3; + } + st += 2; + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + if (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + } + arith_encode(cinfo, st, 0); + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + /* Encode EOB decision only if k < cinfo->Se */ + if (k < cinfo->Se) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 1); + } + + return TRUE; +} + + +/* + * MCU encoding for DC successive approximation refinement scan. + */ + +METHODDEF(boolean) +encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + unsigned char *st; + int Al, blkn; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + st = entropy->fixed_bin; /* use fixed probability estimation */ + Al = cinfo->Al; + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* We simply emit the Al'th bit of the DC coefficient value. */ + arith_encode(cinfo, st, (MCU_data[blkn][0][0] >> Al) & 1); + } + + return TRUE; +} + + +/* + * MCU encoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int tbl, k, ke, kex; + int v; + const int * natural_order; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Section G.1.3.3: Encoding of AC coefficients */ + + /* Establish EOB (end-of-block) index */ + ke = cinfo->Se; + do { + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if ((v = (*block)[natural_order[ke]]) >= 0) { + if (v >>= cinfo->Al) break; + } else { + v = -v; + if (v >>= cinfo->Al) break; + } + } while (--ke); + + /* Establish EOBx (previous stage end-of-block) index */ + for (kex = ke; kex > 0; kex--) + if ((v = (*block)[natural_order[kex]]) >= 0) { + if (v >>= cinfo->Ah) break; + } else { + v = -v; + if (v >>= cinfo->Ah) break; + } + + /* Figure G.10: Encode_AC_Coefficients_SA */ + for (k = cinfo->Ss - 1; k < ke;) { + st = entropy->ac_stats[tbl] + 3 * k; + if (k >= kex) + arith_encode(cinfo, st, 0); /* EOB decision */ + for (;;) { + if ((v = (*block)[natural_order[++k]]) >= 0) { + if (v >>= cinfo->Al) { + if (v >> 1) /* previously nonzero coef */ + arith_encode(cinfo, st + 2, (v & 1)); + else { /* newly nonzero coef */ + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 0); + } + break; + } + } else { + v = -v; + if (v >>= cinfo->Al) { + if (v >> 1) /* previously nonzero coef */ + arith_encode(cinfo, st + 2, (v & 1)); + else { /* newly nonzero coef */ + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 1); + } + break; + } + } + arith_encode(cinfo, st + 1, 0); + st += 3; + } + } + /* Encode EOB decision only if k < cinfo->Se */ + if (k < cinfo->Se) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 1); + } + + return TRUE; +} + + +/* + * Encode and output one MCU's worth of arithmetic-compressed coefficients. + */ + +METHODDEF(boolean) +encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + jpeg_component_info * compptr; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl, k, ke; + int v, v2, m; + const int * natural_order; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + + /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */ + + tbl = compptr->dc_tbl_no; + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.4: Encode_DC_DIFF */ + if ((v = (*block)[0] - entropy->last_dc_val[ci]) == 0) { + arith_encode(cinfo, st, 0); + entropy->dc_context[ci] = 0; /* zero diff category */ + } else { + entropy->last_dc_val[ci] = (*block)[0]; + arith_encode(cinfo, st, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, st + 1, 0); /* Table F.4: SS = S0 + 1 */ + st += 2; /* Table F.4: SP = S0 + 2 */ + entropy->dc_context[ci] = 4; /* small positive diff category */ + } else { + v = -v; + arith_encode(cinfo, st + 1, 1); /* Table F.4: SS = S0 + 1 */ + st += 3; /* Table F.4: SN = S0 + 3 */ + entropy->dc_context[ci] = 8; /* small negative diff category */ + } + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + arith_encode(cinfo, st, 0); + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] += 8; /* large diff category */ + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + + /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */ + + if ((ke = cinfo->lim_Se) == 0) continue; + tbl = compptr->ac_tbl_no; + + /* Establish EOB (end-of-block) index */ + do { + if ((*block)[natural_order[ke]]) break; + } while (--ke); + + /* Figure F.5: Encode_AC_Coefficients */ + for (k = 0; k < ke;) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 0); /* EOB decision */ + while ((v = (*block)[natural_order[++k]]) == 0) { + arith_encode(cinfo, st + 1, 0); + st += 3; + } + arith_encode(cinfo, st + 1, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, entropy->fixed_bin, 0); + } else { + v = -v; + arith_encode(cinfo, entropy->fixed_bin, 1); + } + st += 2; + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + if (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + } + arith_encode(cinfo, st, 0); + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + /* Encode EOB decision only if k < cinfo->lim_Se */ + if (k < cinfo->lim_Se) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 1); + } + } + + return TRUE; +} + + +/* + * Initialize for an arithmetic-compressed scan. + */ + +METHODDEF(void) +start_pass (j_compress_ptr cinfo, boolean gather_statistics) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (gather_statistics) + /* Make sure to avoid that in the master control logic! + * We are fully adaptive here and need no extra + * statistics gathering pass! + */ + ERREXIT(cinfo, JERR_NOT_COMPILED); + + /* We assume jcmaster.c already validated the progressive scan parameters. */ + + /* Select execution routines */ + if (cinfo->progressive_mode) { + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_first; + else + entropy->pub.encode_mcu = encode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_refine; + else + entropy->pub.encode_mcu = encode_mcu_AC_refine; + } + } else + entropy->pub.encode_mcu = encode_mcu; + + /* Allocate & initialize requested statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->dc_stats[tbl] == NULL) + entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS); + MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS); + /* Initialize DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->ac_stats[tbl] == NULL) + entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS); + MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS); +#ifdef CALCULATE_SPECTRAL_CONDITIONING + if (cinfo->progressive_mode) + /* Section G.1.3.2: Set appropriate arithmetic conditioning value Kx */ + cinfo->arith_ac_K[tbl] = cinfo->Ss + ((8 + cinfo->Se - cinfo->Ss) >> 4); +#endif + } + } + + /* Initialize arithmetic encoding variables */ + entropy->c = 0; + entropy->a = 0x10000L; + entropy->sc = 0; + entropy->zc = 0; + entropy->ct = 11; + entropy->buffer = -1; /* empty */ + + /* Initialize restart stuff */ + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num = 0; +} + + +/* + * Module initialization routine for arithmetic entropy encoding. + */ + +GLOBAL(void) +jinit_arith_encoder (j_compress_ptr cinfo) +{ + arith_entropy_ptr entropy; + int i; + + entropy = (arith_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(arith_entropy_encoder)); + cinfo->entropy = &entropy->pub; + entropy->pub.start_pass = start_pass; + entropy->pub.finish_pass = finish_pass; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + entropy->dc_stats[i] = NULL; + entropy->ac_stats[i] = NULL; + } + + /* Initialize index for fixed probability estimation */ + entropy->fixed_bin[0] = 113; +} diff --git a/src/SDL2/external/jpeg-9/jccoefct.c b/src/SDL2/external/jpeg-9/jccoefct.c new file mode 100644 index 000000000..924a703dd --- /dev/null +++ b/src/SDL2/external/jpeg-9/jccoefct.c @@ -0,0 +1,454 @@ +/* + * jccoefct.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2003-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the coefficient buffer controller for compression. + * This controller is the top level of the JPEG compressor proper. + * The coefficient buffer lies between forward-DCT and entropy encoding steps. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* We use a full-image coefficient buffer when doing Huffman optimization, + * and also for writing multiple-scan JPEG files. In all cases, the DCT + * step is run during the first pass, and subsequent passes need only read + * the buffered coefficients. + */ +#ifdef ENTROPY_OPT_SUPPORTED +#define FULL_COEF_BUFFER_SUPPORTED +#else +#ifdef C_MULTISCAN_FILES_SUPPORTED +#define FULL_COEF_BUFFER_SUPPORTED +#endif +#endif + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_coef_controller pub; /* public fields */ + + JDIMENSION iMCU_row_num; /* iMCU row # within image */ + JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* For single-pass compression, it's sufficient to buffer just one MCU + * (although this may prove a bit slow in practice). We allocate a + * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each + * MCU constructed and sent. (On 80x86, the workspace is FAR even though + * it's not really very big; this is to keep the module interfaces unchanged + * when a large coefficient buffer is necessary.) + * In multi-pass modes, this array points to the current MCU's blocks + * within the virtual arrays. + */ + JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; + + /* In multi-pass modes, we need a virtual block array for each component. */ + jvirt_barray_ptr whole_image[MAX_COMPONENTS]; +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + + +/* Forward declarations */ +METHODDEF(boolean) compress_data + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +#ifdef FULL_COEF_BUFFER_SUPPORTED +METHODDEF(boolean) compress_first_pass + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +METHODDEF(boolean) compress_output + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +#endif + + +LOCAL(void) +start_iMCU_row (j_compress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->mcu_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + coef->iMCU_row_num = 0; + start_iMCU_row(cinfo); + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (coef->whole_image[0] != NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_data; + break; +#ifdef FULL_COEF_BUFFER_SUPPORTED + case JBUF_SAVE_AND_PASS: + if (coef->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_first_pass; + break; + case JBUF_CRANK_DEST: + if (coef->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_output; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data in the single-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the image. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf contains a plane for each component in image, + * which we index according to the component's SOF position. + */ + +METHODDEF(boolean) +compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, bi, ci, yindex, yoffset, blockcnt; + JDIMENSION ypos, xpos; + jpeg_component_info *compptr; + forward_DCT_ptr forward_DCT; + + /* Loop to write as much as one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col; + MCU_col_num++) { + /* Determine where data comes from in input_buf and do the DCT thing. + * Each call on forward_DCT processes a horizontal row of DCT blocks + * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks + * sequentially. Dummy blocks at the right or bottom edge are filled in + * specially. The data in them does not matter for image reconstruction, + * so we fill them with values that will encode to the smallest amount of + * data, viz: all zeroes in the AC entries, DC entries equal to previous + * block's DC value. (Thanks to Thomas Kinsman for this idea.) + */ + blkn = 0; + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + forward_DCT = cinfo->fdct->forward_DCT[compptr->component_index]; + blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + xpos = MCU_col_num * compptr->MCU_sample_width; + ypos = yoffset * compptr->DCT_v_scaled_size; + /* ypos == (yoffset+yindex) * DCTSIZE */ + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (coef->iMCU_row_num < last_iMCU_row || + yoffset+yindex < compptr->last_row_height) { + (*forward_DCT) (cinfo, compptr, + input_buf[compptr->component_index], + coef->MCU_buffer[blkn], + ypos, xpos, (JDIMENSION) blockcnt); + if (blockcnt < compptr->MCU_width) { + /* Create some dummy blocks at the right edge of the image. */ + FMEMZERO((void FAR *) coef->MCU_buffer[blkn + blockcnt], + (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK)); + for (bi = blockcnt; bi < compptr->MCU_width; bi++) { + coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0]; + } + } + } else { + /* Create a row of dummy blocks at the bottom of the image. */ + FMEMZERO((void FAR *) coef->MCU_buffer[blkn], + compptr->MCU_width * SIZEOF(JBLOCK)); + for (bi = 0; bi < compptr->MCU_width; bi++) { + coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0]; + } + } + blkn += compptr->MCU_width; + ypos += compptr->DCT_v_scaled_size; + } + } + /* Try to write the MCU. In event of a suspension failure, we will + * re-DCT the MCU on restart (a bit inefficient, could be fixed...) + */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + + +#ifdef FULL_COEF_BUFFER_SUPPORTED + +/* + * Process some data in the first pass of a multi-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the image. + * This amount of data is read from the source buffer, DCT'd and quantized, + * and saved into the virtual arrays. We also generate suitable dummy blocks + * as needed at the right and lower edges. (The dummy blocks are constructed + * in the virtual arrays, which have been padded appropriately.) This makes + * it possible for subsequent passes not to worry about real vs. dummy blocks. + * + * We must also emit the data to the entropy encoder. This is conveniently + * done by calling compress_output() after we've loaded the current strip + * of the virtual arrays. + * + * NB: input_buf contains a plane for each component in image. All + * components are DCT'd and loaded into the virtual arrays in this pass. + * However, it may be that only a subset of the components are emitted to + * the entropy encoder during this first pass; be careful about looking + * at the scan-dependent variables (MCU dimensions, etc). + */ + +METHODDEF(boolean) +compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION blocks_across, MCUs_across, MCUindex; + int bi, ci, h_samp_factor, block_row, block_rows, ndummy; + JCOEF lastDC; + jpeg_component_info *compptr; + JBLOCKARRAY buffer; + JBLOCKROW thisblockrow, lastblockrow; + forward_DCT_ptr forward_DCT; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Align the virtual buffer for this component. */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, TRUE); + /* Count non-dummy DCT block rows in this iMCU row. */ + if (coef->iMCU_row_num < last_iMCU_row) + block_rows = compptr->v_samp_factor; + else { + /* NB: can't use last_row_height here, since may not be set! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + } + blocks_across = compptr->width_in_blocks; + h_samp_factor = compptr->h_samp_factor; + /* Count number of dummy blocks to be added at the right margin. */ + ndummy = (int) (blocks_across % h_samp_factor); + if (ndummy > 0) + ndummy = h_samp_factor - ndummy; + forward_DCT = cinfo->fdct->forward_DCT[ci]; + /* Perform DCT for all non-dummy blocks in this iMCU row. Each call + * on forward_DCT processes a complete horizontal row of DCT blocks. + */ + for (block_row = 0; block_row < block_rows; block_row++) { + thisblockrow = buffer[block_row]; + (*forward_DCT) (cinfo, compptr, input_buf[ci], thisblockrow, + (JDIMENSION) (block_row * compptr->DCT_v_scaled_size), + (JDIMENSION) 0, blocks_across); + if (ndummy > 0) { + /* Create dummy blocks at the right edge of the image. */ + thisblockrow += blocks_across; /* => first dummy block */ + FMEMZERO((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK)); + lastDC = thisblockrow[-1][0]; + for (bi = 0; bi < ndummy; bi++) { + thisblockrow[bi][0] = lastDC; + } + } + } + /* If at end of image, create dummy block rows as needed. + * The tricky part here is that within each MCU, we want the DC values + * of the dummy blocks to match the last real block's DC value. + * This squeezes a few more bytes out of the resulting file... + */ + if (coef->iMCU_row_num == last_iMCU_row) { + blocks_across += ndummy; /* include lower right corner */ + MCUs_across = blocks_across / h_samp_factor; + for (block_row = block_rows; block_row < compptr->v_samp_factor; + block_row++) { + thisblockrow = buffer[block_row]; + lastblockrow = buffer[block_row-1]; + FMEMZERO((void FAR *) thisblockrow, + (size_t) (blocks_across * SIZEOF(JBLOCK))); + for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) { + lastDC = lastblockrow[h_samp_factor-1][0]; + for (bi = 0; bi < h_samp_factor; bi++) { + thisblockrow[bi][0] = lastDC; + } + thisblockrow += h_samp_factor; /* advance to next MCU in row */ + lastblockrow += h_samp_factor; + } + } + } + } + /* NB: compress_output will increment iMCU_row_num if successful. + * A suspension return will result in redoing all the work above next time. + */ + + /* Emit data to the entropy encoder, sharing code with subsequent passes */ + return compress_output(cinfo, input_buf); +} + + +/* + * Process some data in subsequent passes of a multi-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the scan. + * The data is obtained from the virtual arrays and fed to the entropy coder. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf is ignored; it is likely to be a NULL pointer. + */ + +METHODDEF(boolean) +compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + int blkn, ci, xindex, yindex, yoffset; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. + * NB: during first pass, this is safe only because the buffers will + * already be aligned properly, so jmemmgr.c won't need to do any I/O. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < compptr->MCU_width; xindex++) { + coef->MCU_buffer[blkn++] = buffer_ptr++; + } + } + } + /* Try to write the MCU. */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + +#endif /* FULL_COEF_BUFFER_SUPPORTED */ + + +/* + * Initialize coefficient buffer controller. + */ + +GLOBAL(void) +jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_coef_ptr coef; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = (struct jpeg_c_coef_controller *) coef; + coef->pub.start_pass = start_pass_coef; + + /* Create the coefficient buffer. */ + if (need_full_buffer) { +#ifdef FULL_COEF_BUFFER_SUPPORTED + /* Allocate a full-image virtual array for each component, */ + /* padded to a multiple of samp_factor DCT blocks in each direction. */ + int ci; + jpeg_component_info *compptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) jround_up((long) compptr->width_in_blocks, + (long) compptr->h_samp_factor), + (JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor), + (JDIMENSION) compptr->v_samp_factor); + } +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + } else { + /* We only need a single-MCU buffer. */ + JBLOCKROW buffer; + int i; + + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { + coef->MCU_buffer[i] = buffer + i; + } + coef->whole_image[0] = NULL; /* flag for no virtual arrays */ + } +} diff --git a/src/SDL2/external/jpeg-9/jccolor.c b/src/SDL2/external/jpeg-9/jccolor.c new file mode 100644 index 000000000..81d74efb6 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jccolor.c @@ -0,0 +1,541 @@ +/* + * jccolor.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2011-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains input colorspace conversion routines. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private subobject */ + +typedef struct { + struct jpeg_color_converter pub; /* public fields */ + + /* Private state for RGB->YCC conversion */ + INT32 * rgb_ycc_tab; /* => table for RGB to YCbCr conversion */ +} my_color_converter; + +typedef my_color_converter * my_cconvert_ptr; + + +/**************** RGB -> YCbCr conversion: most common case **************/ + +/* + * YCbCr is defined per CCIR 601-1, except that Cb and Cr are + * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. + * The conversion equations to be implemented are therefore + * Y = 0.29900 * R + 0.58700 * G + 0.11400 * B + * Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B + CENTERJSAMPLE + * Cr = 0.50000 * R - 0.41869 * G - 0.08131 * B + CENTERJSAMPLE + * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) + * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2, + * rather than CENTERJSAMPLE, for Cb and Cr. This gave equal positive and + * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0) + * were not represented exactly. Now we sacrifice exact representation of + * maximum red and maximum blue in order to get exact grayscales. + * + * To avoid floating-point arithmetic, we represent the fractional constants + * as integers scaled up by 2^16 (about 4 digits precision); we have to divide + * the products by 2^16, with appropriate rounding, to get the correct answer. + * + * For even more speed, we avoid doing any multiplications in the inner loop + * by precalculating the constants times R,G,B for all possible values. + * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); + * for 12-bit samples it is still acceptable. It's not very reasonable for + * 16-bit samples, but if you want lossless storage you shouldn't be changing + * colorspace anyway. + * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included + * in the tables to save adding them separately in the inner loop. + */ + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define CBCR_OFFSET ((INT32) CENTERJSAMPLE << SCALEBITS) +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L< Y section */ +#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */ +#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */ +#define R_CB_OFF (3*(MAXJSAMPLE+1)) +#define G_CB_OFF (4*(MAXJSAMPLE+1)) +#define B_CB_OFF (5*(MAXJSAMPLE+1)) +#define R_CR_OFF B_CB_OFF /* B=>Cb, R=>Cr are the same */ +#define G_CR_OFF (6*(MAXJSAMPLE+1)) +#define B_CR_OFF (7*(MAXJSAMPLE+1)) +#define TABLE_SIZE (8*(MAXJSAMPLE+1)) + + +/* + * Initialize for RGB->YCC colorspace conversion. + */ + +METHODDEF(void) +rgb_ycc_start (j_compress_ptr cinfo) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + INT32 * rgb_ycc_tab; + INT32 i; + + /* Allocate and fill in the conversion tables. */ + cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (TABLE_SIZE * SIZEOF(INT32))); + + for (i = 0; i <= MAXJSAMPLE; i++) { + rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i; + rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i; + rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF; + rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i; + rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i; + /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr. + * This ensures that the maximum output will round to MAXJSAMPLE + * not MAXJSAMPLE+1, and thus that we don't have to range-limit. + */ + rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; +/* B=>Cb and R=>Cr tables are the same + rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; +*/ + rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i; + rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i; + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * + * Note that we change from the application's interleaved-pixel format + * to our internal noninterleaved, one-plane-per-component format. + * The input buffer is therefore three times as wide as the output buffer. + * + * A starting row offset is provided only for the output buffer. The caller + * can easily adjust the passed input_buf value to accommodate any row + * offset required on that side. + */ + +METHODDEF(void) +rgb_ycc_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register int r, g, b; + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr[RGB_RED]); + g = GETJSAMPLE(inptr[RGB_GREEN]); + b = GETJSAMPLE(inptr[RGB_BLUE]); + /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations + * must be too; we do not need an explicit range-limiting operation. + * Hence the value being shifted is never negative, and we don't + * need the general RIGHT_SHIFT macro. + */ + /* Y */ + outptr0[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + /* Cb */ + outptr1[col] = (JSAMPLE) + ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) + >> SCALEBITS); + /* Cr */ + outptr2[col] = (JSAMPLE) + ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) + >> SCALEBITS); + inptr += RGB_PIXELSIZE; + } + } +} + + +/**************** Cases other than RGB -> YCbCr **************/ + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles RGB->grayscale conversion, which is the same + * as the RGB->Y portion of RGB->YCbCr. + * We assume rgb_ycc_start has been called (we only use the Y tables). + */ + +METHODDEF(void) +rgb_gray_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register int r, g, b; + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr = output_buf[0][output_row++]; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr[RGB_RED]); + g = GETJSAMPLE(inptr[RGB_GREEN]); + b = GETJSAMPLE(inptr[RGB_BLUE]); + /* Y */ + outptr[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + inptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles Adobe-style CMYK->YCCK conversion, + * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same + * conversion as above, while passing K (black) unchanged. + * We assume rgb_ycc_start has been called. + */ + +METHODDEF(void) +cmyk_ycck_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register int r, g, b; + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2, outptr3; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + outptr3 = output_buf[3][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = MAXJSAMPLE - GETJSAMPLE(inptr[0]); + g = MAXJSAMPLE - GETJSAMPLE(inptr[1]); + b = MAXJSAMPLE - GETJSAMPLE(inptr[2]); + /* K passes through as-is */ + outptr3[col] = inptr[3]; /* don't need GETJSAMPLE here */ + /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations + * must be too; we do not need an explicit range-limiting operation. + * Hence the value being shifted is never negative, and we don't + * need the general RIGHT_SHIFT macro. + */ + /* Y */ + outptr0[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + /* Cb */ + outptr1[col] = (JSAMPLE) + ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) + >> SCALEBITS); + /* Cr */ + outptr2[col] = (JSAMPLE) + ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) + >> SCALEBITS); + inptr += 4; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * [R,G,B] to [R-G,G,B-G] conversion with modulo calculation + * (forward reversible color transform). + */ + +METHODDEF(void) +rgb_rgb1_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + register int r, g, b; + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr[RGB_RED]); + g = GETJSAMPLE(inptr[RGB_GREEN]); + b = GETJSAMPLE(inptr[RGB_BLUE]); + /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD + * (modulo) operator is equivalent to the bitmask operator AND. + */ + outptr0[col] = (JSAMPLE) ((r - g + CENTERJSAMPLE) & MAXJSAMPLE); + outptr1[col] = (JSAMPLE) g; + outptr2[col] = (JSAMPLE) ((b - g + CENTERJSAMPLE) & MAXJSAMPLE); + inptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles grayscale output with no conversion. + * The source can be either plain grayscale or YCbCr (since Y == gray). + */ + +METHODDEF(void) +grayscale_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + int instride = cinfo->input_components; + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr = output_buf[0][output_row++]; + for (col = 0; col < num_cols; col++) { + outptr[col] = inptr[0]; /* don't need GETJSAMPLE() here */ + inptr += instride; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * No colorspace conversion, but change from interleaved + * to separate-planes representation. + */ + +METHODDEF(void) +rgb_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + /* We can dispense with GETJSAMPLE() here */ + outptr0[col] = inptr[RGB_RED]; + outptr1[col] = inptr[RGB_GREEN]; + outptr2[col] = inptr[RGB_BLUE]; + inptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles multi-component colorspaces without conversion. + * We assume input_components == num_components. + */ + +METHODDEF(void) +null_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + int ci; + register int nc = cinfo->num_components; + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + /* It seems fastest to make a separate pass for each component. */ + for (ci = 0; ci < nc; ci++) { + inptr = input_buf[0] + ci; + outptr = output_buf[ci][output_row]; + for (col = 0; col < num_cols; col++) { + *outptr++ = *inptr; /* don't need GETJSAMPLE() here */ + inptr += nc; + } + } + input_buf++; + output_row++; + } +} + + +/* + * Empty method for start_pass. + */ + +METHODDEF(void) +null_method (j_compress_ptr cinfo) +{ + /* no work needed */ +} + + +/* + * Module initialization routine for input colorspace conversion. + */ + +GLOBAL(void) +jinit_color_converter (j_compress_ptr cinfo) +{ + my_cconvert_ptr cconvert; + + cconvert = (my_cconvert_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_color_converter)); + cinfo->cconvert = &cconvert->pub; + /* set start_pass to null method until we find out differently */ + cconvert->pub.start_pass = null_method; + + /* Make sure input_components agrees with in_color_space */ + switch (cinfo->in_color_space) { + case JCS_GRAYSCALE: + if (cinfo->input_components != 1) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + case JCS_RGB: + if (cinfo->input_components != RGB_PIXELSIZE) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + case JCS_YCbCr: + if (cinfo->input_components != 3) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + case JCS_CMYK: + case JCS_YCCK: + if (cinfo->input_components != 4) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + default: /* JCS_UNKNOWN can be anything */ + if (cinfo->input_components < 1) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + } + + /* Support color transform only for RGB colorspace */ + if (cinfo->color_transform && cinfo->jpeg_color_space != JCS_RGB) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + + /* Check num_components, set conversion method based on requested space */ + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + if (cinfo->num_components != 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_GRAYSCALE || + cinfo->in_color_space == JCS_YCbCr) + cconvert->pub.color_convert = grayscale_convert; + else if (cinfo->in_color_space == JCS_RGB) { + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = rgb_gray_convert; + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_RGB: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_RGB) { + switch (cinfo->color_transform) { + case JCT_NONE: + cconvert->pub.color_convert = rgb_convert; + break; + case JCT_SUBTRACT_GREEN: + cconvert->pub.color_convert = rgb_rgb1_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + } + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_YCbCr: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_RGB) { + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = rgb_ycc_convert; + } else if (cinfo->in_color_space == JCS_YCbCr) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_CMYK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_CMYK) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_YCCK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_CMYK) { + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = cmyk_ycck_convert; + } else if (cinfo->in_color_space == JCS_YCCK) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + default: /* allow null conversion of JCS_UNKNOWN */ + if (cinfo->jpeg_color_space != cinfo->in_color_space || + cinfo->num_components != cinfo->input_components) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + cconvert->pub.color_convert = null_convert; + break; + } +} diff --git a/src/SDL2/external/jpeg-9/jcdctmgr.c b/src/SDL2/external/jpeg-9/jcdctmgr.c new file mode 100644 index 000000000..0bbdbb685 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcdctmgr.c @@ -0,0 +1,482 @@ +/* + * jcdctmgr.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the forward-DCT management logic. + * This code selects a particular DCT implementation to be used, + * and it performs related housekeeping chores including coefficient + * quantization. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + + +/* Private subobject for this module */ + +typedef struct { + struct jpeg_forward_dct pub; /* public fields */ + + /* Pointer to the DCT routine actually in use */ + forward_DCT_method_ptr do_dct[MAX_COMPONENTS]; + + /* The actual post-DCT divisors --- not identical to the quant table + * entries, because of scaling (especially for an unnormalized DCT). + * Each table is given in normal array order. + */ + DCTELEM * divisors[NUM_QUANT_TBLS]; + +#ifdef DCT_FLOAT_SUPPORTED + /* Same as above for the floating-point case. */ + float_DCT_method_ptr do_float_dct[MAX_COMPONENTS]; + FAST_FLOAT * float_divisors[NUM_QUANT_TBLS]; +#endif +} my_fdct_controller; + +typedef my_fdct_controller * my_fdct_ptr; + + +/* The current scaled-DCT routines require ISLOW-style divisor tables, + * so be sure to compile that code if either ISLOW or SCALING is requested. + */ +#ifdef DCT_ISLOW_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#else +#ifdef DCT_SCALING_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#endif +#endif + + +/* + * Perform forward DCT on one or more blocks of a component. + * + * The input samples are taken from the sample_data[] array starting at + * position start_row/start_col, and moving to the right for any additional + * blocks. The quantized coefficients are returned in coef_blocks[]. + */ + +METHODDEF(void) +forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks) +/* This version is used for integer DCT implementations. */ +{ + /* This routine is heavily used, so it's worth coding it tightly. */ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + forward_DCT_method_ptr do_dct = fdct->do_dct[compptr->component_index]; + DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no]; + DCTELEM workspace[DCTSIZE2]; /* work area for FDCT subroutine */ + JDIMENSION bi; + + sample_data += start_row; /* fold in the vertical offset once */ + + for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) { + /* Perform the DCT */ + (*do_dct) (workspace, sample_data, start_col); + + /* Quantize/descale the coefficients, and store into coef_blocks[] */ + { register DCTELEM temp, qval; + register int i; + register JCOEFPTR output_ptr = coef_blocks[bi]; + + for (i = 0; i < DCTSIZE2; i++) { + qval = divisors[i]; + temp = workspace[i]; + /* Divide the coefficient value by qval, ensuring proper rounding. + * Since C does not specify the direction of rounding for negative + * quotients, we have to force the dividend positive for portability. + * + * In most files, at least half of the output values will be zero + * (at default quantization settings, more like three-quarters...) + * so we should ensure that this case is fast. On many machines, + * a comparison is enough cheaper than a divide to make a special test + * a win. Since both inputs will be nonnegative, we need only test + * for a < b to discover whether a/b is 0. + * If your machine's division is fast enough, define FAST_DIVIDE. + */ +#ifdef FAST_DIVIDE +#define DIVIDE_BY(a,b) a /= b +#else +#define DIVIDE_BY(a,b) if (a >= b) a /= b; else a = 0 +#endif + if (temp < 0) { + temp = -temp; + temp += qval>>1; /* for rounding */ + DIVIDE_BY(temp, qval); + temp = -temp; + } else { + temp += qval>>1; /* for rounding */ + DIVIDE_BY(temp, qval); + } + output_ptr[i] = (JCOEF) temp; + } + } + } +} + + +#ifdef DCT_FLOAT_SUPPORTED + +METHODDEF(void) +forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks) +/* This version is used for floating-point DCT implementations. */ +{ + /* This routine is heavily used, so it's worth coding it tightly. */ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + float_DCT_method_ptr do_dct = fdct->do_float_dct[compptr->component_index]; + FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no]; + FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */ + JDIMENSION bi; + + sample_data += start_row; /* fold in the vertical offset once */ + + for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) { + /* Perform the DCT */ + (*do_dct) (workspace, sample_data, start_col); + + /* Quantize/descale the coefficients, and store into coef_blocks[] */ + { register FAST_FLOAT temp; + register int i; + register JCOEFPTR output_ptr = coef_blocks[bi]; + + for (i = 0; i < DCTSIZE2; i++) { + /* Apply the quantization and scaling factor */ + temp = workspace[i] * divisors[i]; + /* Round to nearest integer. + * Since C does not specify the direction of rounding for negative + * quotients, we have to force the dividend positive for portability. + * The maximum coefficient size is +-16K (for 12-bit data), so this + * code should work for either 16-bit or 32-bit ints. + */ + output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384); + } + } + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ + + +/* + * Initialize for a processing pass. + * Verify that all referenced Q-tables are present, and set up + * the divisor table for each one. + * In the current implementation, DCT of all components is done during + * the first pass, even if only some components will be output in the + * first scan. Hence all components should be examined here. + */ + +METHODDEF(void) +start_pass_fdctmgr (j_compress_ptr cinfo) +{ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + int ci, qtblno, i; + jpeg_component_info *compptr; + int method = 0; + JQUANT_TBL * qtbl; + DCTELEM * dtbl; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Select the proper DCT routine for this component's scaling */ + switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) { +#ifdef DCT_SCALING_SUPPORTED + case ((1 << 8) + 1): + fdct->do_dct[ci] = jpeg_fdct_1x1; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_2x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((3 << 8) + 3): + fdct->do_dct[ci] = jpeg_fdct_3x3; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_4x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((5 << 8) + 5): + fdct->do_dct[ci] = jpeg_fdct_5x5; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_6x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((7 << 8) + 7): + fdct->do_dct[ci] = jpeg_fdct_7x7; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((9 << 8) + 9): + fdct->do_dct[ci] = jpeg_fdct_9x9; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((10 << 8) + 10): + fdct->do_dct[ci] = jpeg_fdct_10x10; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((11 << 8) + 11): + fdct->do_dct[ci] = jpeg_fdct_11x11; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((12 << 8) + 12): + fdct->do_dct[ci] = jpeg_fdct_12x12; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((13 << 8) + 13): + fdct->do_dct[ci] = jpeg_fdct_13x13; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((14 << 8) + 14): + fdct->do_dct[ci] = jpeg_fdct_14x14; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((15 << 8) + 15): + fdct->do_dct[ci] = jpeg_fdct_15x15; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((16 << 8) + 16): + fdct->do_dct[ci] = jpeg_fdct_16x16; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((16 << 8) + 8): + fdct->do_dct[ci] = jpeg_fdct_16x8; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((14 << 8) + 7): + fdct->do_dct[ci] = jpeg_fdct_14x7; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((12 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_12x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((10 << 8) + 5): + fdct->do_dct[ci] = jpeg_fdct_10x5; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((8 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_8x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 3): + fdct->do_dct[ci] = jpeg_fdct_6x3; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_4x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 1): + fdct->do_dct[ci] = jpeg_fdct_2x1; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((8 << 8) + 16): + fdct->do_dct[ci] = jpeg_fdct_8x16; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((7 << 8) + 14): + fdct->do_dct[ci] = jpeg_fdct_7x14; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 12): + fdct->do_dct[ci] = jpeg_fdct_6x12; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((5 << 8) + 10): + fdct->do_dct[ci] = jpeg_fdct_5x10; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 8): + fdct->do_dct[ci] = jpeg_fdct_4x8; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((3 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_3x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_2x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((1 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_1x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; +#endif + case ((DCTSIZE << 8) + DCTSIZE): + switch (cinfo->dct_method) { +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + fdct->do_dct[ci] = jpeg_fdct_islow; + method = JDCT_ISLOW; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + fdct->do_dct[ci] = jpeg_fdct_ifast; + method = JDCT_IFAST; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + fdct->do_float_dct[ci] = jpeg_fdct_float; + method = JDCT_FLOAT; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + break; + default: + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size); + break; + } + qtblno = compptr->quant_tbl_no; + /* Make sure specified quantization table is present */ + if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || + cinfo->quant_tbl_ptrs[qtblno] == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); + qtbl = cinfo->quant_tbl_ptrs[qtblno]; + /* Compute divisors for this quant table */ + /* We may do this more than once for same table, but it's not a big deal */ + switch (method) { +#ifdef PROVIDE_ISLOW_TABLES + case JDCT_ISLOW: + /* For LL&M IDCT method, divisors are equal to raw quantization + * coefficients multiplied by 8 (to counteract scaling). + */ + if (fdct->divisors[qtblno] == NULL) { + fdct->divisors[qtblno] = (DCTELEM *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + DCTSIZE2 * SIZEOF(DCTELEM)); + } + dtbl = fdct->divisors[qtblno]; + for (i = 0; i < DCTSIZE2; i++) { + dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3; + } + fdct->pub.forward_DCT[ci] = forward_DCT; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, divisors are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 8. + */ +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS + + if (fdct->divisors[qtblno] == NULL) { + fdct->divisors[qtblno] = (DCTELEM *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + DCTSIZE2 * SIZEOF(DCTELEM)); + } + dtbl = fdct->divisors[qtblno]; + for (i = 0; i < DCTSIZE2; i++) { + dtbl[i] = (DCTELEM) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), + CONST_BITS-3); + } + } + fdct->pub.forward_DCT[ci] = forward_DCT; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, divisors are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 8. + * What's actually stored is 1/divisor so that the inner loop can + * use a multiplication rather than a division. + */ + FAST_FLOAT * fdtbl; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + if (fdct->float_divisors[qtblno] == NULL) { + fdct->float_divisors[qtblno] = (FAST_FLOAT *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + DCTSIZE2 * SIZEOF(FAST_FLOAT)); + } + fdtbl = fdct->float_divisors[qtblno]; + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fdtbl[i] = (FAST_FLOAT) + (1.0 / (((double) qtbl->quantval[i] * + aanscalefactor[row] * aanscalefactor[col] * 8.0))); + i++; + } + } + } + fdct->pub.forward_DCT[ci] = forward_DCT_float; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Initialize FDCT manager. + */ + +GLOBAL(void) +jinit_forward_dct (j_compress_ptr cinfo) +{ + my_fdct_ptr fdct; + int i; + + fdct = (my_fdct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_fdct_controller)); + cinfo->fdct = (struct jpeg_forward_dct *) fdct; + fdct->pub.start_pass = start_pass_fdctmgr; + + /* Mark divisor tables unallocated */ + for (i = 0; i < NUM_QUANT_TBLS; i++) { + fdct->divisors[i] = NULL; +#ifdef DCT_FLOAT_SUPPORTED + fdct->float_divisors[i] = NULL; +#endif + } +} diff --git a/src/SDL2/external/jpeg-9/jchuff.c b/src/SDL2/external/jpeg-9/jchuff.c new file mode 100644 index 000000000..257d7aa1f --- /dev/null +++ b/src/SDL2/external/jpeg-9/jchuff.c @@ -0,0 +1,1576 @@ +/* + * jchuff.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2006-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy encoding routines. + * Both sequential and progressive modes are supported in this single module. + * + * Much of the complexity here has to do with supporting output suspension. + * If the data destination module demands suspension, we want to be able to + * back up to the start of the current MCU. To do this, we copy state + * variables into local working storage, and update them back to the + * permanent JPEG objects only upon successful completion of an MCU. + * + * We do not support output suspension for the progressive JPEG mode, since + * the library currently does not allow multiple-scan files to be written + * with output suspension. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* The legal range of a DCT coefficient is + * -1024 .. +1023 for 8-bit data; + * -16384 .. +16383 for 12-bit data. + * Hence the magnitude should always fit in 10 or 14 bits respectively. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MAX_COEF_BITS 10 +#else +#define MAX_COEF_BITS 14 +#endif + +/* Derived data constructed for each Huffman table */ + +typedef struct { + unsigned int ehufco[256]; /* code for each symbol */ + char ehufsi[256]; /* length of code for each symbol */ + /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */ +} c_derived_tbl; + + +/* Expanded entropy encoder object for Huffman encoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + INT32 put_buffer; /* current bit-accumulation buffer */ + int put_bits; /* # of bits now in it */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).put_buffer = (src).put_buffer, \ + (dest).put_bits = (src).put_bits, \ + (dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_encoder pub; /* public fields */ + + savable_state saved; /* Bit buffer & DC state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + int next_restart_num; /* next restart number to write (0-7) */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; + c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; + + /* Statistics tables for optimization */ + long * dc_count_ptrs[NUM_HUFF_TBLS]; + long * ac_count_ptrs[NUM_HUFF_TBLS]; + + /* Following fields used only in progressive mode */ + + /* Mode flag: TRUE for optimization, FALSE for actual data output */ + boolean gather_statistics; + + /* next_output_byte/free_in_buffer are local copies of cinfo->dest fields. + */ + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + j_compress_ptr cinfo; /* link to cinfo (needed for dump_buffer) */ + + /* Coding status for AC components */ + int ac_tbl_no; /* the table number of the single component */ + unsigned int EOBRUN; /* run length of EOBs */ + unsigned int BE; /* # of buffered correction bits before MCU */ + char * bit_buffer; /* buffer for correction bits (1 per char) */ + /* packing correction bits tightly would save some space but cost time... */ +} huff_entropy_encoder; + +typedef huff_entropy_encoder * huff_entropy_ptr; + +/* Working state while writing an MCU (sequential mode). + * This struct contains all the fields that are needed by subroutines. + */ + +typedef struct { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + savable_state cur; /* Current bit buffer & DC state */ + j_compress_ptr cinfo; /* dump_buffer needs access to this */ +} working_state; + +/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit + * buffer can hold. Larger sizes may slightly improve compression, but + * 1000 is already well into the realm of overkill. + * The minimum safe size is 64 bits. + */ + +#define MAX_CORR_BITS 1000 /* Max # of correction bits I can buffer */ + +/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. + * We assume that int right shift is unsigned if INT32 right shift is, + * which should be safe. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS int ishift_temp; +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +/* + * Compute the derived values for a Huffman table. + * This routine also performs some validation checks on the table. + */ + +LOCAL(void) +jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno, + c_derived_tbl ** pdtbl) +{ + JHUFF_TBL *htbl; + c_derived_tbl *dtbl; + int p, i, l, lastp, si, maxsymbol; + char huffsize[257]; + unsigned int huffcode[257]; + unsigned int code; + + /* Note that huffsize[] and huffcode[] are filled in code-length order, + * paralleling the order of the symbols themselves in htbl->huffval[]. + */ + + /* Find the input Huffman table */ + if (tblno < 0 || tblno >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + htbl = + isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + + /* Allocate a workspace if we haven't already done so. */ + if (*pdtbl == NULL) + *pdtbl = (c_derived_tbl *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(c_derived_tbl)); + dtbl = *pdtbl; + + /* Figure C.1: make table of Huffman code length for each symbol */ + + p = 0; + for (l = 1; l <= 16; l++) { + i = (int) htbl->bits[l]; + if (i < 0 || p + i > 256) /* protect against table overrun */ + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + while (i--) + huffsize[p++] = (char) l; + } + huffsize[p] = 0; + lastp = p; + + /* Figure C.2: generate the codes themselves */ + /* We also validate that the counts represent a legal Huffman code tree. */ + + code = 0; + si = huffsize[0]; + p = 0; + while (huffsize[p]) { + while (((int) huffsize[p]) == si) { + huffcode[p++] = code; + code++; + } + /* code is now 1 more than the last code used for codelength si; but + * it must still fit in si bits, since no code is allowed to be all ones. + */ + if (((INT32) code) >= (((INT32) 1) << si)) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + code <<= 1; + si++; + } + + /* Figure C.3: generate encoding tables */ + /* These are code and size indexed by symbol value */ + + /* Set all codeless symbols to have code length 0; + * this lets us detect duplicate VAL entries here, and later + * allows emit_bits to detect any attempt to emit such symbols. + */ + MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi)); + + /* This is also a convenient place to check for out-of-range + * and duplicated VAL entries. We allow 0..255 for AC symbols + * but only 0..15 for DC. (We could constrain them further + * based on data depth and mode, but this seems enough.) + */ + maxsymbol = isDC ? 15 : 255; + + for (p = 0; p < lastp; p++) { + i = htbl->huffval[p]; + if (i < 0 || i > maxsymbol || dtbl->ehufsi[i]) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + dtbl->ehufco[i] = huffcode[p]; + dtbl->ehufsi[i] = huffsize[p]; + } +} + + +/* Outputting bytes to the file. + * NB: these must be called only when actually outputting, + * that is, entropy->gather_statistics == FALSE. + */ + +/* Emit a byte, taking 'action' if must suspend. */ +#define emit_byte_s(state,val,action) \ + { *(state)->next_output_byte++ = (JOCTET) (val); \ + if (--(state)->free_in_buffer == 0) \ + if (! dump_buffer_s(state)) \ + { action; } } + +/* Emit a byte */ +#define emit_byte_e(entropy,val) \ + { *(entropy)->next_output_byte++ = (JOCTET) (val); \ + if (--(entropy)->free_in_buffer == 0) \ + dump_buffer_e(entropy); } + + +LOCAL(boolean) +dump_buffer_s (working_state * state) +/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */ +{ + struct jpeg_destination_mgr * dest = state->cinfo->dest; + + if (! (*dest->empty_output_buffer) (state->cinfo)) + return FALSE; + /* After a successful buffer dump, must reset buffer pointers */ + state->next_output_byte = dest->next_output_byte; + state->free_in_buffer = dest->free_in_buffer; + return TRUE; +} + + +LOCAL(void) +dump_buffer_e (huff_entropy_ptr entropy) +/* Empty the output buffer; we do not support suspension in this case. */ +{ + struct jpeg_destination_mgr * dest = entropy->cinfo->dest; + + if (! (*dest->empty_output_buffer) (entropy->cinfo)) + ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND); + /* After a successful buffer dump, must reset buffer pointers */ + entropy->next_output_byte = dest->next_output_byte; + entropy->free_in_buffer = dest->free_in_buffer; +} + + +/* Outputting bits to the file */ + +/* Only the right 24 bits of put_buffer are used; the valid bits are + * left-justified in this part. At most 16 bits can be passed to emit_bits + * in one call, and we never retain more than 7 bits in put_buffer + * between calls, so 24 bits are sufficient. + */ + +INLINE +LOCAL(boolean) +emit_bits_s (working_state * state, unsigned int code, int size) +/* Emit some bits; return TRUE if successful, FALSE if must suspend */ +{ + /* This routine is heavily used, so it's worth coding tightly. */ + register INT32 put_buffer = (INT32) code; + register int put_bits = state->cur.put_bits; + + /* if size is 0, caller used an invalid Huffman table entry */ + if (size == 0) + ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE); + + put_buffer &= (((INT32) 1)<cur.put_buffer; /* and merge with old buffer contents */ + + while (put_bits >= 8) { + int c = (int) ((put_buffer >> 16) & 0xFF); + + emit_byte_s(state, c, return FALSE); + if (c == 0xFF) { /* need to stuff a zero byte? */ + emit_byte_s(state, 0, return FALSE); + } + put_buffer <<= 8; + put_bits -= 8; + } + + state->cur.put_buffer = put_buffer; /* update state variables */ + state->cur.put_bits = put_bits; + + return TRUE; +} + + +INLINE +LOCAL(void) +emit_bits_e (huff_entropy_ptr entropy, unsigned int code, int size) +/* Emit some bits, unless we are in gather mode */ +{ + /* This routine is heavily used, so it's worth coding tightly. */ + register INT32 put_buffer = (INT32) code; + register int put_bits = entropy->saved.put_bits; + + /* if size is 0, caller used an invalid Huffman table entry */ + if (size == 0) + ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); + + if (entropy->gather_statistics) + return; /* do nothing if we're only getting stats */ + + put_buffer &= (((INT32) 1)<saved.put_buffer; + + while (put_bits >= 8) { + int c = (int) ((put_buffer >> 16) & 0xFF); + + emit_byte_e(entropy, c); + if (c == 0xFF) { /* need to stuff a zero byte? */ + emit_byte_e(entropy, 0); + } + put_buffer <<= 8; + put_bits -= 8; + } + + entropy->saved.put_buffer = put_buffer; /* update variables */ + entropy->saved.put_bits = put_bits; +} + + +LOCAL(boolean) +flush_bits_s (working_state * state) +{ + if (! emit_bits_s(state, 0x7F, 7)) /* fill any partial byte with ones */ + return FALSE; + state->cur.put_buffer = 0; /* and reset bit-buffer to empty */ + state->cur.put_bits = 0; + return TRUE; +} + + +LOCAL(void) +flush_bits_e (huff_entropy_ptr entropy) +{ + emit_bits_e(entropy, 0x7F, 7); /* fill any partial byte with ones */ + entropy->saved.put_buffer = 0; /* and reset bit-buffer to empty */ + entropy->saved.put_bits = 0; +} + + +/* + * Emit (or just count) a Huffman symbol. + */ + +INLINE +LOCAL(void) +emit_dc_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol) +{ + if (entropy->gather_statistics) + entropy->dc_count_ptrs[tbl_no][symbol]++; + else { + c_derived_tbl * tbl = entropy->dc_derived_tbls[tbl_no]; + emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); + } +} + + +INLINE +LOCAL(void) +emit_ac_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol) +{ + if (entropy->gather_statistics) + entropy->ac_count_ptrs[tbl_no][symbol]++; + else { + c_derived_tbl * tbl = entropy->ac_derived_tbls[tbl_no]; + emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); + } +} + + +/* + * Emit bits from a correction bit buffer. + */ + +LOCAL(void) +emit_buffered_bits (huff_entropy_ptr entropy, char * bufstart, + unsigned int nbits) +{ + if (entropy->gather_statistics) + return; /* no real work */ + + while (nbits > 0) { + emit_bits_e(entropy, (unsigned int) (*bufstart), 1); + bufstart++; + nbits--; + } +} + + +/* + * Emit any pending EOBRUN symbol. + */ + +LOCAL(void) +emit_eobrun (huff_entropy_ptr entropy) +{ + register int temp, nbits; + + if (entropy->EOBRUN > 0) { /* if there is any pending EOBRUN */ + temp = entropy->EOBRUN; + nbits = 0; + while ((temp >>= 1)) + nbits++; + /* safety check: shouldn't happen given limited correction-bit buffer */ + if (nbits > 14) + ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); + + emit_ac_symbol(entropy, entropy->ac_tbl_no, nbits << 4); + if (nbits) + emit_bits_e(entropy, entropy->EOBRUN, nbits); + + entropy->EOBRUN = 0; + + /* Emit any buffered correction bits */ + emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE); + entropy->BE = 0; + } +} + + +/* + * Emit a restart marker & resynchronize predictions. + */ + +LOCAL(boolean) +emit_restart_s (working_state * state, int restart_num) +{ + int ci; + + if (! flush_bits_s(state)) + return FALSE; + + emit_byte_s(state, 0xFF, return FALSE); + emit_byte_s(state, JPEG_RST0 + restart_num, return FALSE); + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < state->cinfo->comps_in_scan; ci++) + state->cur.last_dc_val[ci] = 0; + + /* The restart counter is not updated until we successfully write the MCU. */ + + return TRUE; +} + + +LOCAL(void) +emit_restart_e (huff_entropy_ptr entropy, int restart_num) +{ + int ci; + + emit_eobrun(entropy); + + if (! entropy->gather_statistics) { + flush_bits_e(entropy); + emit_byte_e(entropy, 0xFF); + emit_byte_e(entropy, JPEG_RST0 + restart_num); + } + + if (entropy->cinfo->Ss == 0) { + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + } else { + /* Re-initialize all AC-related fields to 0 */ + entropy->EOBRUN = 0; + entropy->BE = 0; + } +} + + +/* + * MCU encoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int temp, temp2; + register int nbits; + int blkn, ci; + int Al = cinfo->Al; + JBLOCKROW block; + jpeg_component_info * compptr; + ISHIFT_TEMPS + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + + /* Compute the DC value after the required point transform by Al. + * This is simply an arithmetic right shift. + */ + temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al); + + /* DC differences are figured on the point-transformed values. */ + temp = temp2 - entropy->saved.last_dc_val[ci]; + entropy->saved.last_dc_val[ci] = temp2; + + /* Encode the DC coefficient difference per section G.1.2.1 */ + temp2 = temp; + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* For a negative input, want temp2 = bitwise complement of abs(input) */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count/emit the Huffman-coded symbol for the number of bits */ + emit_dc_symbol(entropy, compptr->dc_tbl_no, nbits); + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (nbits) /* emit_bits rejects calls with size 0 */ + emit_bits_e(entropy, (unsigned int) temp2, nbits); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int temp, temp2; + register int nbits; + register int r, k; + int Se, Al; + const int * natural_order; + JBLOCKROW block; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + + /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */ + + r = 0; /* r = run length of zeros */ + + for (k = cinfo->Ss; k <= Se; k++) { + if ((temp = (*block)[natural_order[k]]) == 0) { + r++; + continue; + } + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value; so the code is + * interwoven with finding the abs value (temp) and output bits (temp2). + */ + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + temp >>= Al; /* apply the point transform */ + /* For a negative coef, want temp2 = bitwise complement of abs(coef) */ + temp2 = ~temp; + } else { + temp >>= Al; /* apply the point transform */ + temp2 = temp; + } + /* Watch out for case that nonzero coef is zero after point transform */ + if (temp == 0) { + r++; + continue; + } + + /* Emit any pending EOBRUN */ + if (entropy->EOBRUN > 0) + emit_eobrun(entropy); + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0); + r -= 16; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count/emit Huffman symbol for run length / number of bits */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits); + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + emit_bits_e(entropy, (unsigned int) temp2, nbits); + + r = 0; /* reset zero run length */ + } + + if (r > 0) { /* If there are trailing zeroes, */ + entropy->EOBRUN++; /* count an EOB */ + if (entropy->EOBRUN == 0x7FFF) + emit_eobrun(entropy); /* force it out to avoid overflow */ + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, although the spec + * is not very clear on the point. + */ + +METHODDEF(boolean) +encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int temp; + int blkn; + int Al = cinfo->Al; + JBLOCKROW block; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + + /* We simply emit the Al'th bit of the DC coefficient value. */ + temp = (*block)[0]; + emit_bits_e(entropy, (unsigned int) (temp >> Al), 1); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int temp; + register int r, k; + int EOB; + char *BR_buffer; + unsigned int BR; + int Se, Al; + const int * natural_order; + JBLOCKROW block; + int absvalues[DCTSIZE2]; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + + /* It is convenient to make a pre-pass to determine the transformed + * coefficients' absolute values and the EOB position. + */ + EOB = 0; + for (k = cinfo->Ss; k <= Se; k++) { + temp = (*block)[natural_order[k]]; + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if (temp < 0) + temp = -temp; /* temp is abs value of input */ + temp >>= Al; /* apply the point transform */ + absvalues[k] = temp; /* save abs value for main pass */ + if (temp == 1) + EOB = k; /* EOB = index of last newly-nonzero coef */ + } + + /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */ + + r = 0; /* r = run length of zeros */ + BR = 0; /* BR = count of buffered bits added now */ + BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */ + + for (k = cinfo->Ss; k <= Se; k++) { + if ((temp = absvalues[k]) == 0) { + r++; + continue; + } + + /* Emit any required ZRLs, but not if they can be folded into EOB */ + while (r > 15 && k <= EOB) { + /* emit any pending EOBRUN and the BE correction bits */ + emit_eobrun(entropy); + /* Emit ZRL */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0); + r -= 16; + /* Emit buffered correction bits that must be associated with ZRL */ + emit_buffered_bits(entropy, BR_buffer, BR); + BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ + BR = 0; + } + + /* If the coef was previously nonzero, it only needs a correction bit. + * NOTE: a straight translation of the spec's figure G.7 would suggest + * that we also need to test r > 15. But if r > 15, we can only get here + * if k > EOB, which implies that this coefficient is not 1. + */ + if (temp > 1) { + /* The correction bit is the next bit of the absolute value. */ + BR_buffer[BR++] = (char) (temp & 1); + continue; + } + + /* Emit any pending EOBRUN and the BE correction bits */ + emit_eobrun(entropy); + + /* Count/emit Huffman symbol for run length / number of bits */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1); + + /* Emit output bit for newly-nonzero coef */ + temp = ((*block)[natural_order[k]] < 0) ? 0 : 1; + emit_bits_e(entropy, (unsigned int) temp, 1); + + /* Emit buffered correction bits that must be associated with this code */ + emit_buffered_bits(entropy, BR_buffer, BR); + BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ + BR = 0; + r = 0; /* reset zero run length */ + } + + if (r > 0 || BR > 0) { /* If there are trailing zeroes, */ + entropy->EOBRUN++; /* count an EOB */ + entropy->BE += BR; /* concat my correction bits to older ones */ + /* We force out the EOB if we risk either: + * 1. overflow of the EOB counter; + * 2. overflow of the correction bit buffer during the next MCU. + */ + if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1)) + emit_eobrun(entropy); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* Encode a single block's worth of coefficients */ + +LOCAL(boolean) +encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val, + c_derived_tbl *dctbl, c_derived_tbl *actbl) +{ + register int temp, temp2; + register int nbits; + register int k, r, i; + int Se = state->cinfo->lim_Se; + const int * natural_order = state->cinfo->natural_order; + + /* Encode the DC coefficient difference per section F.1.2.1 */ + + temp = temp2 = block[0] - last_dc_val; + + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* For a negative input, want temp2 = bitwise complement of abs(input) */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); + + /* Emit the Huffman-coded symbol for the number of bits */ + if (! emit_bits_s(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits])) + return FALSE; + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (nbits) /* emit_bits rejects calls with size 0 */ + if (! emit_bits_s(state, (unsigned int) temp2, nbits)) + return FALSE; + + /* Encode the AC coefficients per section F.1.2.2 */ + + r = 0; /* r = run length of zeros */ + + for (k = 1; k <= Se; k++) { + if ((temp = block[natural_order[k]]) == 0) { + r++; + } else { + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + if (! emit_bits_s(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0])) + return FALSE; + r -= 16; + } + + temp2 = temp; + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); + + /* Emit Huffman symbol for run length / number of bits */ + i = (r << 4) + nbits; + if (! emit_bits_s(state, actbl->ehufco[i], actbl->ehufsi[i])) + return FALSE; + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (! emit_bits_s(state, (unsigned int) temp2, nbits)) + return FALSE; + + r = 0; + } + } + + /* If the last coef(s) were zero, emit an end-of-block code */ + if (r > 0) + if (! emit_bits_s(state, actbl->ehufco[0], actbl->ehufsi[0])) + return FALSE; + + return TRUE; +} + + +/* + * Encode and output one MCU's worth of Huffman-compressed coefficients. + */ + +METHODDEF(boolean) +encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + working_state state; + int blkn, ci; + jpeg_component_info * compptr; + + /* Load up working state */ + state.next_output_byte = cinfo->dest->next_output_byte; + state.free_in_buffer = cinfo->dest->free_in_buffer; + ASSIGN_STATE(state.cur, entropy->saved); + state.cinfo = cinfo; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! emit_restart_s(&state, entropy->next_restart_num)) + return FALSE; + } + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + if (! encode_one_block(&state, + MCU_data[blkn][0], state.cur.last_dc_val[ci], + entropy->dc_derived_tbls[compptr->dc_tbl_no], + entropy->ac_derived_tbls[compptr->ac_tbl_no])) + return FALSE; + /* Update last_dc_val */ + state.cur.last_dc_val[ci] = MCU_data[blkn][0][0]; + } + + /* Completed MCU, so update state */ + cinfo->dest->next_output_byte = state.next_output_byte; + cinfo->dest->free_in_buffer = state.free_in_buffer; + ASSIGN_STATE(entropy->saved, state.cur); + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * Finish up at the end of a Huffman-compressed scan. + */ + +METHODDEF(void) +finish_pass_huff (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + working_state state; + + if (cinfo->progressive_mode) { + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Flush out any buffered data */ + emit_eobrun(entropy); + flush_bits_e(entropy); + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + } else { + /* Load up working state ... flush_bits needs it */ + state.next_output_byte = cinfo->dest->next_output_byte; + state.free_in_buffer = cinfo->dest->free_in_buffer; + ASSIGN_STATE(state.cur, entropy->saved); + state.cinfo = cinfo; + + /* Flush out the last data */ + if (! flush_bits_s(&state)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + + /* Update state */ + cinfo->dest->next_output_byte = state.next_output_byte; + cinfo->dest->free_in_buffer = state.free_in_buffer; + ASSIGN_STATE(entropy->saved, state.cur); + } +} + + +/* + * Huffman coding optimization. + * + * We first scan the supplied data and count the number of uses of each symbol + * that is to be Huffman-coded. (This process MUST agree with the code above.) + * Then we build a Huffman coding tree for the observed counts. + * Symbols which are not needed at all for the particular image are not + * assigned any code, which saves space in the DHT marker as well as in + * the compressed data. + */ + + +/* Process a single block's worth of coefficients */ + +LOCAL(void) +htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val, + long dc_counts[], long ac_counts[]) +{ + register int temp; + register int nbits; + register int k, r; + int Se = cinfo->lim_Se; + const int * natural_order = cinfo->natural_order; + + /* Encode the DC coefficient difference per section F.1.2.1 */ + + temp = block[0] - last_dc_val; + if (temp < 0) + temp = -temp; + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count the Huffman symbol for the number of bits */ + dc_counts[nbits]++; + + /* Encode the AC coefficients per section F.1.2.2 */ + + r = 0; /* r = run length of zeros */ + + for (k = 1; k <= Se; k++) { + if ((temp = block[natural_order[k]]) == 0) { + r++; + } else { + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + ac_counts[0xF0]++; + r -= 16; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + if (temp < 0) + temp = -temp; + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count Huffman symbol for run length / number of bits */ + ac_counts[(r << 4) + nbits]++; + + r = 0; + } + } + + /* If the last coef(s) were zero, emit an end-of-block code */ + if (r > 0) + ac_counts[0]++; +} + + +/* + * Trial-encode one MCU's worth of Huffman-compressed coefficients. + * No data is actually output, so no suspension return is possible. + */ + +METHODDEF(boolean) +encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int blkn, ci; + jpeg_component_info * compptr; + + /* Take care of restart intervals if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + /* Update restart state */ + entropy->restarts_to_go = cinfo->restart_interval; + } + entropy->restarts_to_go--; + } + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci], + entropy->dc_count_ptrs[compptr->dc_tbl_no], + entropy->ac_count_ptrs[compptr->ac_tbl_no]); + entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0]; + } + + return TRUE; +} + + +/* + * Generate the best Huffman code table for the given counts, fill htbl. + * + * The JPEG standard requires that no symbol be assigned a codeword of all + * one bits (so that padding bits added at the end of a compressed segment + * can't look like a valid code). Because of the canonical ordering of + * codewords, this just means that there must be an unused slot in the + * longest codeword length category. Section K.2 of the JPEG spec suggests + * reserving such a slot by pretending that symbol 256 is a valid symbol + * with count 1. In theory that's not optimal; giving it count zero but + * including it in the symbol set anyway should give a better Huffman code. + * But the theoretically better code actually seems to come out worse in + * practice, because it produces more all-ones bytes (which incur stuffed + * zero bytes in the final file). In any case the difference is tiny. + * + * The JPEG standard requires Huffman codes to be no more than 16 bits long. + * If some symbols have a very small but nonzero probability, the Huffman tree + * must be adjusted to meet the code length restriction. We currently use + * the adjustment method suggested in JPEG section K.2. This method is *not* + * optimal; it may not choose the best possible limited-length code. But + * typically only very-low-frequency symbols will be given less-than-optimal + * lengths, so the code is almost optimal. Experimental comparisons against + * an optimal limited-length-code algorithm indicate that the difference is + * microscopic --- usually less than a hundredth of a percent of total size. + * So the extra complexity of an optimal algorithm doesn't seem worthwhile. + */ + +LOCAL(void) +jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]) +{ +#define MAX_CLEN 32 /* assumed maximum initial code length */ + UINT8 bits[MAX_CLEN+1]; /* bits[k] = # of symbols with code length k */ + int codesize[257]; /* codesize[k] = code length of symbol k */ + int others[257]; /* next symbol in current branch of tree */ + int c1, c2; + int p, i, j; + long v; + + /* This algorithm is explained in section K.2 of the JPEG standard */ + + MEMZERO(bits, SIZEOF(bits)); + MEMZERO(codesize, SIZEOF(codesize)); + for (i = 0; i < 257; i++) + others[i] = -1; /* init links to empty */ + + freq[256] = 1; /* make sure 256 has a nonzero count */ + /* Including the pseudo-symbol 256 in the Huffman procedure guarantees + * that no real symbol is given code-value of all ones, because 256 + * will be placed last in the largest codeword category. + */ + + /* Huffman's basic algorithm to assign optimal code lengths to symbols */ + + for (;;) { + /* Find the smallest nonzero frequency, set c1 = its symbol */ + /* In case of ties, take the larger symbol number */ + c1 = -1; + v = 1000000000L; + for (i = 0; i <= 256; i++) { + if (freq[i] && freq[i] <= v) { + v = freq[i]; + c1 = i; + } + } + + /* Find the next smallest nonzero frequency, set c2 = its symbol */ + /* In case of ties, take the larger symbol number */ + c2 = -1; + v = 1000000000L; + for (i = 0; i <= 256; i++) { + if (freq[i] && freq[i] <= v && i != c1) { + v = freq[i]; + c2 = i; + } + } + + /* Done if we've merged everything into one frequency */ + if (c2 < 0) + break; + + /* Else merge the two counts/trees */ + freq[c1] += freq[c2]; + freq[c2] = 0; + + /* Increment the codesize of everything in c1's tree branch */ + codesize[c1]++; + while (others[c1] >= 0) { + c1 = others[c1]; + codesize[c1]++; + } + + others[c1] = c2; /* chain c2 onto c1's tree branch */ + + /* Increment the codesize of everything in c2's tree branch */ + codesize[c2]++; + while (others[c2] >= 0) { + c2 = others[c2]; + codesize[c2]++; + } + } + + /* Now count the number of symbols of each code length */ + for (i = 0; i <= 256; i++) { + if (codesize[i]) { + /* The JPEG standard seems to think that this can't happen, */ + /* but I'm paranoid... */ + if (codesize[i] > MAX_CLEN) + ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW); + + bits[codesize[i]]++; + } + } + + /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure + * Huffman procedure assigned any such lengths, we must adjust the coding. + * Here is what the JPEG spec says about how this next bit works: + * Since symbols are paired for the longest Huffman code, the symbols are + * removed from this length category two at a time. The prefix for the pair + * (which is one bit shorter) is allocated to one of the pair; then, + * skipping the BITS entry for that prefix length, a code word from the next + * shortest nonzero BITS entry is converted into a prefix for two code words + * one bit longer. + */ + + for (i = MAX_CLEN; i > 16; i--) { + while (bits[i] > 0) { + j = i - 2; /* find length of new prefix to be used */ + while (bits[j] == 0) + j--; + + bits[i] -= 2; /* remove two symbols */ + bits[i-1]++; /* one goes in this length */ + bits[j+1] += 2; /* two new symbols in this length */ + bits[j]--; /* symbol of this length is now a prefix */ + } + } + + /* Remove the count for the pseudo-symbol 256 from the largest codelength */ + while (bits[i] == 0) /* find largest codelength still in use */ + i--; + bits[i]--; + + /* Return final symbol counts (only for lengths 0..16) */ + MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits)); + + /* Return a list of the symbols sorted by code length */ + /* It's not real clear to me why we don't need to consider the codelength + * changes made above, but the JPEG spec seems to think this works. + */ + p = 0; + for (i = 1; i <= MAX_CLEN; i++) { + for (j = 0; j <= 255; j++) { + if (codesize[j] == i) { + htbl->huffval[p] = (UINT8) j; + p++; + } + } + } + + /* Set sent_table FALSE so updated table will be written to JPEG file. */ + htbl->sent_table = FALSE; +} + + +/* + * Finish up a statistics-gathering pass and create the new Huffman tables. + */ + +METHODDEF(void) +finish_pass_gather (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + JHUFF_TBL **htblptr; + boolean did_dc[NUM_HUFF_TBLS]; + boolean did_ac[NUM_HUFF_TBLS]; + + /* It's important not to apply jpeg_gen_optimal_table more than once + * per table, because it clobbers the input frequency counts! + */ + if (cinfo->progressive_mode) + /* Flush out buffered data (all we care about is counting the EOB symbol) */ + emit_eobrun(entropy); + + MEMZERO(did_dc, SIZEOF(did_dc)); + MEMZERO(did_ac, SIZEOF(did_ac)); + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (! did_dc[tbl]) { + htblptr = & cinfo->dc_huff_tbl_ptrs[tbl]; + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[tbl]); + did_dc[tbl] = TRUE; + } + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (! did_ac[tbl]) { + htblptr = & cinfo->ac_huff_tbl_ptrs[tbl]; + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[tbl]); + did_ac[tbl] = TRUE; + } + } + } +} + + +/* + * Initialize for a Huffman-compressed scan. + * If gather_statistics is TRUE, we do not output anything during the scan, + * just count the Huffman symbols used and generate Huffman code tables. + */ + +METHODDEF(void) +start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (gather_statistics) + entropy->pub.finish_pass = finish_pass_gather; + else + entropy->pub.finish_pass = finish_pass_huff; + + if (cinfo->progressive_mode) { + entropy->cinfo = cinfo; + entropy->gather_statistics = gather_statistics; + + /* We assume jcmaster.c already validated the scan parameters. */ + + /* Select execution routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_first; + else + entropy->pub.encode_mcu = encode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_refine; + else { + entropy->pub.encode_mcu = encode_mcu_AC_refine; + /* AC refinement needs a correction bit buffer */ + if (entropy->bit_buffer == NULL) + entropy->bit_buffer = (char *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + MAX_CORR_BITS * SIZEOF(char)); + } + } + + /* Initialize AC stuff */ + entropy->ac_tbl_no = cinfo->cur_comp_info[0]->ac_tbl_no; + entropy->EOBRUN = 0; + entropy->BE = 0; + } else { + if (gather_statistics) + entropy->pub.encode_mcu = encode_mcu_gather; + else + entropy->pub.encode_mcu = encode_mcu_huff; + } + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (gather_statistics) { + /* Check for invalid table index */ + /* (make_c_derived_tbl does this in the other path) */ + if (tbl < 0 || tbl >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); + /* Allocate and zero the statistics tables */ + /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ + if (entropy->dc_count_ptrs[tbl] == NULL) + entropy->dc_count_ptrs[tbl] = (long *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 257 * SIZEOF(long)); + MEMZERO(entropy->dc_count_ptrs[tbl], 257 * SIZEOF(long)); + } else { + /* Compute derived values for Huffman tables */ + /* We may do this more than once for a table, but it's not expensive */ + jpeg_make_c_derived_tbl(cinfo, TRUE, tbl, + & entropy->dc_derived_tbls[tbl]); + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (gather_statistics) { + if (tbl < 0 || tbl >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); + if (entropy->ac_count_ptrs[tbl] == NULL) + entropy->ac_count_ptrs[tbl] = (long *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 257 * SIZEOF(long)); + MEMZERO(entropy->ac_count_ptrs[tbl], 257 * SIZEOF(long)); + } else { + jpeg_make_c_derived_tbl(cinfo, FALSE, tbl, + & entropy->ac_derived_tbls[tbl]); + } + } + } + + /* Initialize bit buffer to empty */ + entropy->saved.put_buffer = 0; + entropy->saved.put_bits = 0; + + /* Initialize restart stuff */ + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num = 0; +} + + +/* + * Module initialization routine for Huffman entropy encoding. + */ + +GLOBAL(void) +jinit_huff_encoder (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy; + int i; + + entropy = (huff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(huff_entropy_encoder)); + cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; + entropy->pub.start_pass = start_pass_huff; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; + entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL; + } + + if (cinfo->progressive_mode) + entropy->bit_buffer = NULL; /* needed only in AC refinement scan */ +} diff --git a/src/SDL2/external/jpeg-9/jcinit.c b/src/SDL2/external/jpeg-9/jcinit.c new file mode 100644 index 000000000..0ba310f21 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcinit.c @@ -0,0 +1,65 @@ +/* + * jcinit.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains initialization logic for the JPEG compressor. + * This routine is in charge of selecting the modules to be executed and + * making an initialization call to each one. + * + * Logically, this code belongs in jcmaster.c. It's split out because + * linking this routine implies linking the entire compression library. + * For a transcoding-only application, we want to be able to use jcmaster.c + * without linking in the whole library. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Master selection of compression modules. + * This is done once at the start of processing an image. We determine + * which modules will be used and give them appropriate initialization calls. + */ + +GLOBAL(void) +jinit_compress_master (j_compress_ptr cinfo) +{ + /* Initialize master control (includes parameter checking/processing) */ + jinit_c_master_control(cinfo, FALSE /* full compression */); + + /* Preprocessing */ + if (! cinfo->raw_data_in) { + jinit_color_converter(cinfo); + jinit_downsampler(cinfo); + jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */); + } + /* Forward DCT */ + jinit_forward_dct(cinfo); + /* Entropy encoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_encoder(cinfo); + else { + jinit_huff_encoder(cinfo); + } + + /* Need a full-image coefficient buffer in any multi-pass mode. */ + jinit_c_coef_controller(cinfo, + (boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding)); + jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */); + + jinit_marker_writer(cinfo); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Write the datastream header (SOI) immediately. + * Frame and scan headers are postponed till later. + * This lets application insert special markers after the SOI. + */ + (*cinfo->marker->write_file_header) (cinfo); +} diff --git a/src/SDL2/external/jpeg-9/jcmainct.c b/src/SDL2/external/jpeg-9/jcmainct.c new file mode 100644 index 000000000..39b97902e --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcmainct.c @@ -0,0 +1,297 @@ +/* + * jcmainct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the main buffer controller for compression. + * The main buffer lies between the pre-processor and the JPEG + * compressor proper; it holds downsampled data in the JPEG colorspace. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Note: currently, there is no operating mode in which a full-image buffer + * is needed at this step. If there were, that mode could not be used with + * "raw data" input, since this module is bypassed in that case. However, + * we've left the code here for possible use in special applications. + */ +#undef FULL_MAIN_BUFFER_SUPPORTED + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_main_controller pub; /* public fields */ + + JDIMENSION cur_iMCU_row; /* number of current iMCU row */ + JDIMENSION rowgroup_ctr; /* counts row groups received in iMCU row */ + boolean suspended; /* remember if we suspended output */ + J_BUF_MODE pass_mode; /* current operating mode */ + + /* If using just a strip buffer, this points to the entire set of buffers + * (we allocate one for each component). In the full-image case, this + * points to the currently accessible strips of the virtual arrays. + */ + JSAMPARRAY buffer[MAX_COMPONENTS]; + +#ifdef FULL_MAIN_BUFFER_SUPPORTED + /* If using full-image storage, this array holds pointers to virtual-array + * control blocks for each component. Unused if not full-image storage. + */ + jvirt_sarray_ptr whole_image[MAX_COMPONENTS]; +#endif +} my_main_controller; + +typedef my_main_controller * my_main_ptr; + + +/* Forward declarations */ +METHODDEF(void) process_data_simple_main + JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); +#ifdef FULL_MAIN_BUFFER_SUPPORTED +METHODDEF(void) process_data_buffer_main + JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); +#endif + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + + /* Do nothing in raw-data mode. */ + if (cinfo->raw_data_in) + return; + + mainp->cur_iMCU_row = 0; /* initialize counters */ + mainp->rowgroup_ctr = 0; + mainp->suspended = FALSE; + mainp->pass_mode = pass_mode; /* save mode for use by process_data */ + + switch (pass_mode) { + case JBUF_PASS_THRU: +#ifdef FULL_MAIN_BUFFER_SUPPORTED + if (mainp->whole_image[0] != NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + mainp->pub.process_data = process_data_simple_main; + break; +#ifdef FULL_MAIN_BUFFER_SUPPORTED + case JBUF_SAVE_SOURCE: + case JBUF_CRANK_DEST: + case JBUF_SAVE_AND_PASS: + if (mainp->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + mainp->pub.process_data = process_data_buffer_main; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data. + * This routine handles the simple pass-through mode, + * where we have only a strip buffer. + */ + +METHODDEF(void) +process_data_simple_main (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + + while (mainp->cur_iMCU_row < cinfo->total_iMCU_rows) { + /* Read input data if we haven't filled the main buffer yet */ + if (mainp->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size) + (*cinfo->prep->pre_process_data) (cinfo, + input_buf, in_row_ctr, in_rows_avail, + mainp->buffer, &mainp->rowgroup_ctr, + (JDIMENSION) cinfo->min_DCT_v_scaled_size); + + /* If we don't have a full iMCU row buffered, return to application for + * more data. Note that preprocessor will always pad to fill the iMCU row + * at the bottom of the image. + */ + if (mainp->rowgroup_ctr != (JDIMENSION) cinfo->min_DCT_v_scaled_size) + return; + + /* Send the completed row to the compressor */ + if (! (*cinfo->coef->compress_data) (cinfo, mainp->buffer)) { + /* If compressor did not consume the whole row, then we must need to + * suspend processing and return to the application. In this situation + * we pretend we didn't yet consume the last input row; otherwise, if + * it happened to be the last row of the image, the application would + * think we were done. + */ + if (! mainp->suspended) { + (*in_row_ctr)--; + mainp->suspended = TRUE; + } + return; + } + /* We did finish the row. Undo our little suspension hack if a previous + * call suspended; then mark the main buffer empty. + */ + if (mainp->suspended) { + (*in_row_ctr)++; + mainp->suspended = FALSE; + } + mainp->rowgroup_ctr = 0; + mainp->cur_iMCU_row++; + } +} + + +#ifdef FULL_MAIN_BUFFER_SUPPORTED + +/* + * Process some data. + * This routine handles all of the modes that use a full-size buffer. + */ + +METHODDEF(void) +process_data_buffer_main (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + int ci; + jpeg_component_info *compptr; + boolean writing = (mainp->pass_mode != JBUF_CRANK_DEST); + + while (mainp->cur_iMCU_row < cinfo->total_iMCU_rows) { + /* Realign the virtual buffers if at the start of an iMCU row. */ + if (mainp->rowgroup_ctr == 0) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + mainp->buffer[ci] = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, mainp->whole_image[ci], mainp->cur_iMCU_row * + ((JDIMENSION) (compptr->v_samp_factor * cinfo->min_DCT_v_scaled_size)), + (JDIMENSION) (compptr->v_samp_factor * cinfo->min_DCT_v_scaled_size), + writing); + } + /* In a read pass, pretend we just read some source data. */ + if (! writing) { + *in_row_ctr += (JDIMENSION) + (cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size); + mainp->rowgroup_ctr = (JDIMENSION) cinfo->min_DCT_v_scaled_size; + } + } + + /* If a write pass, read input data until the current iMCU row is full. */ + /* Note: preprocessor will pad if necessary to fill the last iMCU row. */ + if (writing) { + (*cinfo->prep->pre_process_data) (cinfo, + input_buf, in_row_ctr, in_rows_avail, + mainp->buffer, &mainp->rowgroup_ctr, + (JDIMENSION) cinfo->min_DCT_v_scaled_size); + /* Return to application if we need more data to fill the iMCU row. */ + if (mainp->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size) + return; + } + + /* Emit data, unless this is a sink-only pass. */ + if (mainp->pass_mode != JBUF_SAVE_SOURCE) { + if (! (*cinfo->coef->compress_data) (cinfo, mainp->buffer)) { + /* If compressor did not consume the whole row, then we must need to + * suspend processing and return to the application. In this situation + * we pretend we didn't yet consume the last input row; otherwise, if + * it happened to be the last row of the image, the application would + * think we were done. + */ + if (! mainp->suspended) { + (*in_row_ctr)--; + mainp->suspended = TRUE; + } + return; + } + /* We did finish the row. Undo our little suspension hack if a previous + * call suspended; then mark the main buffer empty. + */ + if (mainp->suspended) { + (*in_row_ctr)++; + mainp->suspended = FALSE; + } + } + + /* If get here, we are done with this iMCU row. Mark buffer empty. */ + mainp->rowgroup_ctr = 0; + mainp->cur_iMCU_row++; + } +} + +#endif /* FULL_MAIN_BUFFER_SUPPORTED */ + + +/* + * Initialize main buffer controller. + */ + +GLOBAL(void) +jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_main_ptr mainp; + int ci; + jpeg_component_info *compptr; + + mainp = (my_main_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_main_controller)); + cinfo->main = &mainp->pub; + mainp->pub.start_pass = start_pass_main; + + /* We don't need to create a buffer in raw-data mode. */ + if (cinfo->raw_data_in) + return; + + /* Create the buffer. It holds downsampled data, so each component + * may be of a different size. + */ + if (need_full_buffer) { +#ifdef FULL_MAIN_BUFFER_SUPPORTED + /* Allocate a full-image virtual array for each component */ + /* Note we pad the bottom to a multiple of the iMCU height */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + mainp->whole_image[ci] = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size), + ((JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor)) * + ((JDIMENSION) cinfo->min_DCT_v_scaled_size), + (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size)); + } +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + } else { +#ifdef FULL_MAIN_BUFFER_SUPPORTED + mainp->whole_image[0] = NULL; /* flag for no virtual arrays */ +#endif + /* Allocate a strip buffer for each component */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + mainp->buffer[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size), + (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size)); + } + } +} diff --git a/src/SDL2/external/jpeg-9/jcmarker.c b/src/SDL2/external/jpeg-9/jcmarker.c new file mode 100644 index 000000000..92aa65fe0 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcmarker.c @@ -0,0 +1,719 @@ +/* + * jcmarker.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2003-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write JPEG datastream markers. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +typedef enum { /* JPEG marker codes */ + M_SOF0 = 0xc0, + M_SOF1 = 0xc1, + M_SOF2 = 0xc2, + M_SOF3 = 0xc3, + + M_SOF5 = 0xc5, + M_SOF6 = 0xc6, + M_SOF7 = 0xc7, + + M_JPG = 0xc8, + M_SOF9 = 0xc9, + M_SOF10 = 0xca, + M_SOF11 = 0xcb, + + M_SOF13 = 0xcd, + M_SOF14 = 0xce, + M_SOF15 = 0xcf, + + M_DHT = 0xc4, + + M_DAC = 0xcc, + + M_RST0 = 0xd0, + M_RST1 = 0xd1, + M_RST2 = 0xd2, + M_RST3 = 0xd3, + M_RST4 = 0xd4, + M_RST5 = 0xd5, + M_RST6 = 0xd6, + M_RST7 = 0xd7, + + M_SOI = 0xd8, + M_EOI = 0xd9, + M_SOS = 0xda, + M_DQT = 0xdb, + M_DNL = 0xdc, + M_DRI = 0xdd, + M_DHP = 0xde, + M_EXP = 0xdf, + + M_APP0 = 0xe0, + M_APP1 = 0xe1, + M_APP2 = 0xe2, + M_APP3 = 0xe3, + M_APP4 = 0xe4, + M_APP5 = 0xe5, + M_APP6 = 0xe6, + M_APP7 = 0xe7, + M_APP8 = 0xe8, + M_APP9 = 0xe9, + M_APP10 = 0xea, + M_APP11 = 0xeb, + M_APP12 = 0xec, + M_APP13 = 0xed, + M_APP14 = 0xee, + M_APP15 = 0xef, + + M_JPG0 = 0xf0, + M_JPG8 = 0xf8, + M_JPG13 = 0xfd, + M_COM = 0xfe, + + M_TEM = 0x01, + + M_ERROR = 0x100 +} JPEG_MARKER; + + +/* Private state */ + +typedef struct { + struct jpeg_marker_writer pub; /* public fields */ + + unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */ +} my_marker_writer; + +typedef my_marker_writer * my_marker_ptr; + + +/* + * Basic output routines. + * + * Note that we do not support suspension while writing a marker. + * Therefore, an application using suspension must ensure that there is + * enough buffer space for the initial markers (typ. 600-700 bytes) before + * calling jpeg_start_compress, and enough space to write the trailing EOI + * (a few bytes) before calling jpeg_finish_compress. Multipass compression + * modes are not supported at all with suspension, so those two are the only + * points where markers will be written. + */ + +LOCAL(void) +emit_byte (j_compress_ptr cinfo, int val) +/* Emit a byte */ +{ + struct jpeg_destination_mgr * dest = cinfo->dest; + + *(dest->next_output_byte)++ = (JOCTET) val; + if (--dest->free_in_buffer == 0) { + if (! (*dest->empty_output_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + } +} + + +LOCAL(void) +emit_marker (j_compress_ptr cinfo, JPEG_MARKER mark) +/* Emit a marker code */ +{ + emit_byte(cinfo, 0xFF); + emit_byte(cinfo, (int) mark); +} + + +LOCAL(void) +emit_2bytes (j_compress_ptr cinfo, int value) +/* Emit a 2-byte integer; these are always MSB first in JPEG files */ +{ + emit_byte(cinfo, (value >> 8) & 0xFF); + emit_byte(cinfo, value & 0xFF); +} + + +/* + * Routines to write specific marker types. + */ + +LOCAL(int) +emit_dqt (j_compress_ptr cinfo, int index) +/* Emit a DQT marker */ +/* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */ +{ + JQUANT_TBL * qtbl = cinfo->quant_tbl_ptrs[index]; + int prec; + int i; + + if (qtbl == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index); + + prec = 0; + for (i = 0; i <= cinfo->lim_Se; i++) { + if (qtbl->quantval[cinfo->natural_order[i]] > 255) + prec = 1; + } + + if (! qtbl->sent_table) { + emit_marker(cinfo, M_DQT); + + emit_2bytes(cinfo, + prec ? cinfo->lim_Se * 2 + 2 + 1 + 2 : cinfo->lim_Se + 1 + 1 + 2); + + emit_byte(cinfo, index + (prec<<4)); + + for (i = 0; i <= cinfo->lim_Se; i++) { + /* The table entries must be emitted in zigzag order. */ + unsigned int qval = qtbl->quantval[cinfo->natural_order[i]]; + if (prec) + emit_byte(cinfo, (int) (qval >> 8)); + emit_byte(cinfo, (int) (qval & 0xFF)); + } + + qtbl->sent_table = TRUE; + } + + return prec; +} + + +LOCAL(void) +emit_dht (j_compress_ptr cinfo, int index, boolean is_ac) +/* Emit a DHT marker */ +{ + JHUFF_TBL * htbl; + int length, i; + + if (is_ac) { + htbl = cinfo->ac_huff_tbl_ptrs[index]; + index += 0x10; /* output index has AC bit set */ + } else { + htbl = cinfo->dc_huff_tbl_ptrs[index]; + } + + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, index); + + if (! htbl->sent_table) { + emit_marker(cinfo, M_DHT); + + length = 0; + for (i = 1; i <= 16; i++) + length += htbl->bits[i]; + + emit_2bytes(cinfo, length + 2 + 1 + 16); + emit_byte(cinfo, index); + + for (i = 1; i <= 16; i++) + emit_byte(cinfo, htbl->bits[i]); + + for (i = 0; i < length; i++) + emit_byte(cinfo, htbl->huffval[i]); + + htbl->sent_table = TRUE; + } +} + + +LOCAL(void) +emit_dac (j_compress_ptr cinfo) +/* Emit a DAC marker */ +/* Since the useful info is so small, we want to emit all the tables in */ +/* one DAC marker. Therefore this routine does its own scan of the table. */ +{ +#ifdef C_ARITH_CODING_SUPPORTED + char dc_in_use[NUM_ARITH_TBLS]; + char ac_in_use[NUM_ARITH_TBLS]; + int length, i; + jpeg_component_info *compptr; + + for (i = 0; i < NUM_ARITH_TBLS; i++) + dc_in_use[i] = ac_in_use[i] = 0; + + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) + dc_in_use[compptr->dc_tbl_no] = 1; + /* AC needs no table when not present */ + if (cinfo->Se) + ac_in_use[compptr->ac_tbl_no] = 1; + } + + length = 0; + for (i = 0; i < NUM_ARITH_TBLS; i++) + length += dc_in_use[i] + ac_in_use[i]; + + if (length) { + emit_marker(cinfo, M_DAC); + + emit_2bytes(cinfo, length*2 + 2); + + for (i = 0; i < NUM_ARITH_TBLS; i++) { + if (dc_in_use[i]) { + emit_byte(cinfo, i); + emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4)); + } + if (ac_in_use[i]) { + emit_byte(cinfo, i + 0x10); + emit_byte(cinfo, cinfo->arith_ac_K[i]); + } + } + } +#endif /* C_ARITH_CODING_SUPPORTED */ +} + + +LOCAL(void) +emit_dri (j_compress_ptr cinfo) +/* Emit a DRI marker */ +{ + emit_marker(cinfo, M_DRI); + + emit_2bytes(cinfo, 4); /* fixed length */ + + emit_2bytes(cinfo, (int) cinfo->restart_interval); +} + + +LOCAL(void) +emit_lse_ict (j_compress_ptr cinfo) +/* Emit an LSE inverse color transform specification marker */ +{ + /* Support only 1 transform */ + if (cinfo->color_transform != JCT_SUBTRACT_GREEN || + cinfo->num_components < 3) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + + emit_marker(cinfo, M_JPG8); + + emit_2bytes(cinfo, 24); /* fixed length */ + + emit_byte(cinfo, 0x0D); /* ID inverse transform specification */ + emit_2bytes(cinfo, MAXJSAMPLE); /* MAXTRANS */ + emit_byte(cinfo, 3); /* Nt=3 */ + emit_byte(cinfo, cinfo->comp_info[1].component_id); + emit_byte(cinfo, cinfo->comp_info[0].component_id); + emit_byte(cinfo, cinfo->comp_info[2].component_id); + emit_byte(cinfo, 0x80); /* F1: CENTER1=1, NORM1=0 */ + emit_2bytes(cinfo, 0); /* A(1,1)=0 */ + emit_2bytes(cinfo, 0); /* A(1,2)=0 */ + emit_byte(cinfo, 0); /* F2: CENTER2=0, NORM2=0 */ + emit_2bytes(cinfo, 1); /* A(2,1)=1 */ + emit_2bytes(cinfo, 0); /* A(2,2)=0 */ + emit_byte(cinfo, 0); /* F3: CENTER3=0, NORM3=0 */ + emit_2bytes(cinfo, 1); /* A(3,1)=1 */ + emit_2bytes(cinfo, 0); /* A(3,2)=0 */ +} + + +LOCAL(void) +emit_sof (j_compress_ptr cinfo, JPEG_MARKER code) +/* Emit a SOF marker */ +{ + int ci; + jpeg_component_info *compptr; + + emit_marker(cinfo, code); + + emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */ + + /* Make sure image isn't bigger than SOF field can handle */ + if ((long) cinfo->jpeg_height > 65535L || + (long) cinfo->jpeg_width > 65535L) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535); + + emit_byte(cinfo, cinfo->data_precision); + emit_2bytes(cinfo, (int) cinfo->jpeg_height); + emit_2bytes(cinfo, (int) cinfo->jpeg_width); + + emit_byte(cinfo, cinfo->num_components); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + emit_byte(cinfo, compptr->component_id); + emit_byte(cinfo, (compptr->h_samp_factor << 4) + compptr->v_samp_factor); + emit_byte(cinfo, compptr->quant_tbl_no); + } +} + + +LOCAL(void) +emit_sos (j_compress_ptr cinfo) +/* Emit a SOS marker */ +{ + int i, td, ta; + jpeg_component_info *compptr; + + emit_marker(cinfo, M_SOS); + + emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */ + + emit_byte(cinfo, cinfo->comps_in_scan); + + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + emit_byte(cinfo, compptr->component_id); + + /* We emit 0 for unused field(s); this is recommended by the P&M text + * but does not seem to be specified in the standard. + */ + + /* DC needs no table for refinement scan */ + td = cinfo->Ss == 0 && cinfo->Ah == 0 ? compptr->dc_tbl_no : 0; + /* AC needs no table when not present */ + ta = cinfo->Se ? compptr->ac_tbl_no : 0; + + emit_byte(cinfo, (td << 4) + ta); + } + + emit_byte(cinfo, cinfo->Ss); + emit_byte(cinfo, cinfo->Se); + emit_byte(cinfo, (cinfo->Ah << 4) + cinfo->Al); +} + + +LOCAL(void) +emit_pseudo_sos (j_compress_ptr cinfo) +/* Emit a pseudo SOS marker */ +{ + emit_marker(cinfo, M_SOS); + + emit_2bytes(cinfo, 2 + 1 + 3); /* length */ + + emit_byte(cinfo, 0); /* Ns */ + + emit_byte(cinfo, 0); /* Ss */ + emit_byte(cinfo, cinfo->block_size * cinfo->block_size - 1); /* Se */ + emit_byte(cinfo, 0); /* Ah/Al */ +} + + +LOCAL(void) +emit_jfif_app0 (j_compress_ptr cinfo) +/* Emit a JFIF-compliant APP0 marker */ +{ + /* + * Length of APP0 block (2 bytes) + * Block ID (4 bytes - ASCII "JFIF") + * Zero byte (1 byte to terminate the ID string) + * Version Major, Minor (2 bytes - major first) + * Units (1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm) + * Xdpu (2 bytes - dots per unit horizontal) + * Ydpu (2 bytes - dots per unit vertical) + * Thumbnail X size (1 byte) + * Thumbnail Y size (1 byte) + */ + + emit_marker(cinfo, M_APP0); + + emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */ + + emit_byte(cinfo, 0x4A); /* Identifier: ASCII "JFIF" */ + emit_byte(cinfo, 0x46); + emit_byte(cinfo, 0x49); + emit_byte(cinfo, 0x46); + emit_byte(cinfo, 0); + emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */ + emit_byte(cinfo, cinfo->JFIF_minor_version); + emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */ + emit_2bytes(cinfo, (int) cinfo->X_density); + emit_2bytes(cinfo, (int) cinfo->Y_density); + emit_byte(cinfo, 0); /* No thumbnail image */ + emit_byte(cinfo, 0); +} + + +LOCAL(void) +emit_adobe_app14 (j_compress_ptr cinfo) +/* Emit an Adobe APP14 marker */ +{ + /* + * Length of APP14 block (2 bytes) + * Block ID (5 bytes - ASCII "Adobe") + * Version Number (2 bytes - currently 100) + * Flags0 (2 bytes - currently 0) + * Flags1 (2 bytes - currently 0) + * Color transform (1 byte) + * + * Although Adobe TN 5116 mentions Version = 101, all the Adobe files + * now in circulation seem to use Version = 100, so that's what we write. + * + * We write the color transform byte as 1 if the JPEG color space is + * YCbCr, 2 if it's YCCK, 0 otherwise. Adobe's definition has to do with + * whether the encoder performed a transformation, which is pretty useless. + */ + + emit_marker(cinfo, M_APP14); + + emit_2bytes(cinfo, 2 + 5 + 2 + 2 + 2 + 1); /* length */ + + emit_byte(cinfo, 0x41); /* Identifier: ASCII "Adobe" */ + emit_byte(cinfo, 0x64); + emit_byte(cinfo, 0x6F); + emit_byte(cinfo, 0x62); + emit_byte(cinfo, 0x65); + emit_2bytes(cinfo, 100); /* Version */ + emit_2bytes(cinfo, 0); /* Flags0 */ + emit_2bytes(cinfo, 0); /* Flags1 */ + switch (cinfo->jpeg_color_space) { + case JCS_YCbCr: + emit_byte(cinfo, 1); /* Color transform = 1 */ + break; + case JCS_YCCK: + emit_byte(cinfo, 2); /* Color transform = 2 */ + break; + default: + emit_byte(cinfo, 0); /* Color transform = 0 */ + break; + } +} + + +/* + * These routines allow writing an arbitrary marker with parameters. + * The only intended use is to emit COM or APPn markers after calling + * write_file_header and before calling write_frame_header. + * Other uses are not guaranteed to produce desirable results. + * Counting the parameter bytes properly is the caller's responsibility. + */ + +METHODDEF(void) +write_marker_header (j_compress_ptr cinfo, int marker, unsigned int datalen) +/* Emit an arbitrary marker header */ +{ + if (datalen > (unsigned int) 65533) /* safety check */ + ERREXIT(cinfo, JERR_BAD_LENGTH); + + emit_marker(cinfo, (JPEG_MARKER) marker); + + emit_2bytes(cinfo, (int) (datalen + 2)); /* total length */ +} + +METHODDEF(void) +write_marker_byte (j_compress_ptr cinfo, int val) +/* Emit one byte of marker parameters following write_marker_header */ +{ + emit_byte(cinfo, val); +} + + +/* + * Write datastream header. + * This consists of an SOI and optional APPn markers. + * We recommend use of the JFIF marker, but not the Adobe marker, + * when using YCbCr or grayscale data. The JFIF marker should NOT + * be used for any other JPEG colorspace. The Adobe marker is helpful + * to distinguish RGB, CMYK, and YCCK colorspaces. + * Note that an application can write additional header markers after + * jpeg_start_compress returns. + */ + +METHODDEF(void) +write_file_header (j_compress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + emit_marker(cinfo, M_SOI); /* first the SOI */ + + /* SOI is defined to reset restart interval to 0 */ + marker->last_restart_interval = 0; + + if (cinfo->write_JFIF_header) /* next an optional JFIF APP0 */ + emit_jfif_app0(cinfo); + if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */ + emit_adobe_app14(cinfo); +} + + +/* + * Write frame header. + * This consists of DQT and SOFn markers, + * a conditional LSE marker and a conditional pseudo SOS marker. + * Note that we do not emit the SOF until we have emitted the DQT(s). + * This avoids compatibility problems with incorrect implementations that + * try to error-check the quant table numbers as soon as they see the SOF. + */ + +METHODDEF(void) +write_frame_header (j_compress_ptr cinfo) +{ + int ci, prec; + boolean is_baseline; + jpeg_component_info *compptr; + + /* Emit DQT for each quantization table. + * Note that emit_dqt() suppresses any duplicate tables. + */ + prec = 0; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + prec += emit_dqt(cinfo, compptr->quant_tbl_no); + } + /* now prec is nonzero iff there are any 16-bit quant tables. */ + + /* Check for a non-baseline specification. + * Note we assume that Huffman table numbers won't be changed later. + */ + if (cinfo->arith_code || cinfo->progressive_mode || + cinfo->data_precision != 8 || cinfo->block_size != DCTSIZE) { + is_baseline = FALSE; + } else { + is_baseline = TRUE; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->dc_tbl_no > 1 || compptr->ac_tbl_no > 1) + is_baseline = FALSE; + } + if (prec && is_baseline) { + is_baseline = FALSE; + /* If it's baseline except for quantizer size, warn the user */ + TRACEMS(cinfo, 0, JTRC_16BIT_TABLES); + } + } + + /* Emit the proper SOF marker */ + if (cinfo->arith_code) { + if (cinfo->progressive_mode) + emit_sof(cinfo, M_SOF10); /* SOF code for progressive arithmetic */ + else + emit_sof(cinfo, M_SOF9); /* SOF code for sequential arithmetic */ + } else { + if (cinfo->progressive_mode) + emit_sof(cinfo, M_SOF2); /* SOF code for progressive Huffman */ + else if (is_baseline) + emit_sof(cinfo, M_SOF0); /* SOF code for baseline implementation */ + else + emit_sof(cinfo, M_SOF1); /* SOF code for non-baseline Huffman file */ + } + + /* Check to emit LSE inverse color transform specification marker */ + if (cinfo->color_transform) + emit_lse_ict(cinfo); + + /* Check to emit pseudo SOS marker */ + if (cinfo->progressive_mode && cinfo->block_size != DCTSIZE) + emit_pseudo_sos(cinfo); +} + + +/* + * Write scan header. + * This consists of DHT or DAC markers, optional DRI, and SOS. + * Compressed data will be written following the SOS. + */ + +METHODDEF(void) +write_scan_header (j_compress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + int i; + jpeg_component_info *compptr; + + if (cinfo->arith_code) { + /* Emit arith conditioning info. We may have some duplication + * if the file has multiple scans, but it's so small it's hardly + * worth worrying about. + */ + emit_dac(cinfo); + } else { + /* Emit Huffman tables. + * Note that emit_dht() suppresses any duplicate tables. + */ + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) + emit_dht(cinfo, compptr->dc_tbl_no, FALSE); + /* AC needs no table when not present */ + if (cinfo->Se) + emit_dht(cinfo, compptr->ac_tbl_no, TRUE); + } + } + + /* Emit DRI if required --- note that DRI value could change for each scan. + * We avoid wasting space with unnecessary DRIs, however. + */ + if (cinfo->restart_interval != marker->last_restart_interval) { + emit_dri(cinfo); + marker->last_restart_interval = cinfo->restart_interval; + } + + emit_sos(cinfo); +} + + +/* + * Write datastream trailer. + */ + +METHODDEF(void) +write_file_trailer (j_compress_ptr cinfo) +{ + emit_marker(cinfo, M_EOI); +} + + +/* + * Write an abbreviated table-specification datastream. + * This consists of SOI, DQT and DHT tables, and EOI. + * Any table that is defined and not marked sent_table = TRUE will be + * emitted. Note that all tables will be marked sent_table = TRUE at exit. + */ + +METHODDEF(void) +write_tables_only (j_compress_ptr cinfo) +{ + int i; + + emit_marker(cinfo, M_SOI); + + for (i = 0; i < NUM_QUANT_TBLS; i++) { + if (cinfo->quant_tbl_ptrs[i] != NULL) + (void) emit_dqt(cinfo, i); + } + + if (! cinfo->arith_code) { + for (i = 0; i < NUM_HUFF_TBLS; i++) { + if (cinfo->dc_huff_tbl_ptrs[i] != NULL) + emit_dht(cinfo, i, FALSE); + if (cinfo->ac_huff_tbl_ptrs[i] != NULL) + emit_dht(cinfo, i, TRUE); + } + } + + emit_marker(cinfo, M_EOI); +} + + +/* + * Initialize the marker writer module. + */ + +GLOBAL(void) +jinit_marker_writer (j_compress_ptr cinfo) +{ + my_marker_ptr marker; + + /* Create the subobject */ + marker = (my_marker_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_marker_writer)); + cinfo->marker = &marker->pub; + /* Initialize method pointers */ + marker->pub.write_file_header = write_file_header; + marker->pub.write_frame_header = write_frame_header; + marker->pub.write_scan_header = write_scan_header; + marker->pub.write_file_trailer = write_file_trailer; + marker->pub.write_tables_only = write_tables_only; + marker->pub.write_marker_header = write_marker_header; + marker->pub.write_marker_byte = write_marker_byte; + /* Initialize private state */ + marker->last_restart_interval = 0; +} diff --git a/src/SDL2/external/jpeg-9/jcmaster.c b/src/SDL2/external/jpeg-9/jcmaster.c new file mode 100644 index 000000000..caf80a53b --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcmaster.c @@ -0,0 +1,858 @@ +/* + * jcmaster.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2003-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains master control logic for the JPEG compressor. + * These routines are concerned with parameter validation, initial setup, + * and inter-pass control (determining the number of passes and the work + * to be done in each pass). + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef enum { + main_pass, /* input data, also do first output step */ + huff_opt_pass, /* Huffman code optimization pass */ + output_pass /* data output pass */ +} c_pass_type; + +typedef struct { + struct jpeg_comp_master pub; /* public fields */ + + c_pass_type pass_type; /* the type of the current pass */ + + int pass_number; /* # of passes completed */ + int total_passes; /* total # of passes needed */ + + int scan_number; /* current index in scan_info[] */ +} my_comp_master; + +typedef my_comp_master * my_master_ptr; + + +/* + * Support routines that do various essential calculations. + */ + +/* + * Compute JPEG image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + */ + +GLOBAL(void) +jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo) +/* Do computations that are needed before master selection phase */ +{ +#ifdef DCT_SCALING_SUPPORTED + + /* Sanity check on input image dimensions to prevent overflow in + * following calculation. + * We do check jpeg_width and jpeg_height in initial_setup below, + * but image_width and image_height can come from arbitrary data, + * and we need some space for multiplication by block_size. + */ + if (((long) cinfo->image_width >> 24) || ((long) cinfo->image_height >> 24)) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* Compute actual JPEG image dimensions and DCT scaling choices. */ + if (cinfo->scale_num >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/1 scaling */ + cinfo->jpeg_width = cinfo->image_width * cinfo->block_size; + cinfo->jpeg_height = cinfo->image_height * cinfo->block_size; + cinfo->min_DCT_h_scaled_size = 1; + cinfo->min_DCT_v_scaled_size = 1; + } else if (cinfo->scale_num * 2 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/2 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 2L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 2L); + cinfo->min_DCT_h_scaled_size = 2; + cinfo->min_DCT_v_scaled_size = 2; + } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/3 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 3L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 3L); + cinfo->min_DCT_h_scaled_size = 3; + cinfo->min_DCT_v_scaled_size = 3; + } else if (cinfo->scale_num * 4 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/4 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 4L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 4L); + cinfo->min_DCT_h_scaled_size = 4; + cinfo->min_DCT_v_scaled_size = 4; + } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/5 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 5L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 5L); + cinfo->min_DCT_h_scaled_size = 5; + cinfo->min_DCT_v_scaled_size = 5; + } else if (cinfo->scale_num * 6 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/6 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 6L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 6L); + cinfo->min_DCT_h_scaled_size = 6; + cinfo->min_DCT_v_scaled_size = 6; + } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/7 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 7L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 7L); + cinfo->min_DCT_h_scaled_size = 7; + cinfo->min_DCT_v_scaled_size = 7; + } else if (cinfo->scale_num * 8 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/8 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 8L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 8L); + cinfo->min_DCT_h_scaled_size = 8; + cinfo->min_DCT_v_scaled_size = 8; + } else if (cinfo->scale_num * 9 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/9 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 9L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 9L); + cinfo->min_DCT_h_scaled_size = 9; + cinfo->min_DCT_v_scaled_size = 9; + } else if (cinfo->scale_num * 10 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/10 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 10L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 10L); + cinfo->min_DCT_h_scaled_size = 10; + cinfo->min_DCT_v_scaled_size = 10; + } else if (cinfo->scale_num * 11 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/11 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 11L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 11L); + cinfo->min_DCT_h_scaled_size = 11; + cinfo->min_DCT_v_scaled_size = 11; + } else if (cinfo->scale_num * 12 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/12 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 12L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 12L); + cinfo->min_DCT_h_scaled_size = 12; + cinfo->min_DCT_v_scaled_size = 12; + } else if (cinfo->scale_num * 13 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/13 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 13L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 13L); + cinfo->min_DCT_h_scaled_size = 13; + cinfo->min_DCT_v_scaled_size = 13; + } else if (cinfo->scale_num * 14 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/14 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 14L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 14L); + cinfo->min_DCT_h_scaled_size = 14; + cinfo->min_DCT_v_scaled_size = 14; + } else if (cinfo->scale_num * 15 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/15 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 15L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 15L); + cinfo->min_DCT_h_scaled_size = 15; + cinfo->min_DCT_v_scaled_size = 15; + } else { + /* Provide block_size/16 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 16L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 16L); + cinfo->min_DCT_h_scaled_size = 16; + cinfo->min_DCT_v_scaled_size = 16; + } + +#else /* !DCT_SCALING_SUPPORTED */ + + /* Hardwire it to "no scaling" */ + cinfo->jpeg_width = cinfo->image_width; + cinfo->jpeg_height = cinfo->image_height; + cinfo->min_DCT_h_scaled_size = DCTSIZE; + cinfo->min_DCT_v_scaled_size = DCTSIZE; + +#endif /* DCT_SCALING_SUPPORTED */ +} + + +LOCAL(void) +jpeg_calc_trans_dimensions (j_compress_ptr cinfo) +{ + if (cinfo->min_DCT_h_scaled_size != cinfo->min_DCT_v_scaled_size) + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + cinfo->min_DCT_h_scaled_size, cinfo->min_DCT_v_scaled_size); + + cinfo->block_size = cinfo->min_DCT_h_scaled_size; +} + + +LOCAL(void) +initial_setup (j_compress_ptr cinfo, boolean transcode_only) +/* Do computations that are needed before master selection phase */ +{ + int ci, ssize; + jpeg_component_info *compptr; + long samplesperrow; + JDIMENSION jd_samplesperrow; + + if (transcode_only) + jpeg_calc_trans_dimensions(cinfo); + else + jpeg_calc_jpeg_dimensions(cinfo); + + /* Sanity check on block_size */ + if (cinfo->block_size < 1 || cinfo->block_size > 16) + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, cinfo->block_size, cinfo->block_size); + + /* Derive natural_order from block_size */ + switch (cinfo->block_size) { + case 2: cinfo->natural_order = jpeg_natural_order2; break; + case 3: cinfo->natural_order = jpeg_natural_order3; break; + case 4: cinfo->natural_order = jpeg_natural_order4; break; + case 5: cinfo->natural_order = jpeg_natural_order5; break; + case 6: cinfo->natural_order = jpeg_natural_order6; break; + case 7: cinfo->natural_order = jpeg_natural_order7; break; + default: cinfo->natural_order = jpeg_natural_order; break; + } + + /* Derive lim_Se from block_size */ + cinfo->lim_Se = cinfo->block_size < DCTSIZE ? + cinfo->block_size * cinfo->block_size - 1 : DCTSIZE2-1; + + /* Sanity check on image dimensions */ + if (cinfo->jpeg_height <= 0 || cinfo->jpeg_width <= 0 || + cinfo->num_components <= 0 || cinfo->input_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + /* Make sure image isn't bigger than I can handle */ + if ((long) cinfo->jpeg_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->jpeg_width > (long) JPEG_MAX_DIMENSION) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* Width of an input scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Check that number of components won't exceed internal array sizes */ + if (cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + + /* Compute maximum sampling factors; check factor validity */ + cinfo->max_h_samp_factor = 1; + cinfo->max_v_samp_factor = 1; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || + compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) + ERREXIT(cinfo, JERR_BAD_SAMPLING); + cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, + compptr->h_samp_factor); + cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, + compptr->v_samp_factor); + } + + /* Compute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Fill in the correct component_index value; don't rely on application */ + compptr->component_index = ci; + /* In selecting the actual DCT scaling for each component, we try to + * scale down the chroma components via DCT scaling rather than downsampling. + * This saves time if the downsampler gets to use 1:1 scaling. + * Note this code adapts subsampling ratios which are powers of 2. + */ + ssize = 1; +#ifdef DCT_SCALING_SUPPORTED + while (cinfo->min_DCT_h_scaled_size * ssize <= + (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } +#endif + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize; + ssize = 1; +#ifdef DCT_SCALING_SUPPORTED + while (cinfo->min_DCT_v_scaled_size * ssize <= + (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } +#endif + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize; + + /* We don't support DCT ratios larger than 2. */ + if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2) + compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2; + else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2) + compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2; + + /* Size in DCT blocks */ + compptr->width_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->height_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + /* Size in samples */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_width * + (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size), + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height * + (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size), + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + /* Mark component needed (this flag isn't actually used for compression) */ + compptr->component_needed = TRUE; + } + + /* Compute number of fully interleaved MCU rows (number of times that + * main controller will call coefficient controller). + */ + cinfo->total_iMCU_rows = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); +} + + +#ifdef C_MULTISCAN_FILES_SUPPORTED + +LOCAL(void) +validate_script (j_compress_ptr cinfo) +/* Verify that the scan script in cinfo->scan_info[] is valid; also + * determine whether it uses progressive JPEG, and set cinfo->progressive_mode. + */ +{ + const jpeg_scan_info * scanptr; + int scanno, ncomps, ci, coefi, thisi; + int Ss, Se, Ah, Al; + boolean component_sent[MAX_COMPONENTS]; +#ifdef C_PROGRESSIVE_SUPPORTED + int * last_bitpos_ptr; + int last_bitpos[MAX_COMPONENTS][DCTSIZE2]; + /* -1 until that coefficient has been seen; then last Al for it */ +#endif + + if (cinfo->num_scans <= 0) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0); + + /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1; + * for progressive JPEG, no scan can have this. + */ + scanptr = cinfo->scan_info; + if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) { +#ifdef C_PROGRESSIVE_SUPPORTED + cinfo->progressive_mode = TRUE; + last_bitpos_ptr = & last_bitpos[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (coefi = 0; coefi < DCTSIZE2; coefi++) + *last_bitpos_ptr++ = -1; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + cinfo->progressive_mode = FALSE; + for (ci = 0; ci < cinfo->num_components; ci++) + component_sent[ci] = FALSE; + } + + for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) { + /* Validate component indexes */ + ncomps = scanptr->comps_in_scan; + if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN); + for (ci = 0; ci < ncomps; ci++) { + thisi = scanptr->component_index[ci]; + if (thisi < 0 || thisi >= cinfo->num_components) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + /* Components must appear in SOF order within each scan */ + if (ci > 0 && thisi <= scanptr->component_index[ci-1]) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + } + /* Validate progression parameters */ + Ss = scanptr->Ss; + Se = scanptr->Se; + Ah = scanptr->Ah; + Al = scanptr->Al; + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that + * seems wrong: the upper bound ought to depend on data precision. + * Perhaps they really meant 0..N+1 for N-bit precision. + * Here we allow 0..10 for 8-bit data; Al larger than 10 results in + * out-of-range reconstructed DC values during the first DC scan, + * which might cause problems for some decoders. + */ +#if BITS_IN_JSAMPLE == 8 +#define MAX_AH_AL 10 +#else +#define MAX_AH_AL 13 +#endif + if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 || + Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + if (Ss == 0) { + if (Se != 0) /* DC and AC together not OK */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } else { + if (ncomps != 1) /* AC scans must be for only one component */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } + for (ci = 0; ci < ncomps; ci++) { + last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0]; + if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + for (coefi = Ss; coefi <= Se; coefi++) { + if (last_bitpos_ptr[coefi] < 0) { + /* first scan of this coefficient */ + if (Ah != 0) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } else { + /* not first scan */ + if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } + last_bitpos_ptr[coefi] = Al; + } + } +#endif + } else { + /* For sequential JPEG, all progression parameters must be these: */ + if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + /* Make sure components are not sent twice */ + for (ci = 0; ci < ncomps; ci++) { + thisi = scanptr->component_index[ci]; + if (component_sent[thisi]) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + component_sent[thisi] = TRUE; + } + } + } + + /* Now verify that everything got sent. */ + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + /* For progressive mode, we only check that at least some DC data + * got sent for each component; the spec does not require that all bits + * of all coefficients be transmitted. Would it be wiser to enforce + * transmission of all coefficient bits?? + */ + for (ci = 0; ci < cinfo->num_components; ci++) { + if (last_bitpos[ci][0] < 0) + ERREXIT(cinfo, JERR_MISSING_DATA); + } +#endif + } else { + for (ci = 0; ci < cinfo->num_components; ci++) { + if (! component_sent[ci]) + ERREXIT(cinfo, JERR_MISSING_DATA); + } + } +} + + +LOCAL(void) +reduce_script (j_compress_ptr cinfo) +/* Adapt scan script for use with reduced block size; + * assume that script has been validated before. + */ +{ + jpeg_scan_info * scanptr; + int idxout, idxin; + + /* Circumvent const declaration for this function */ + scanptr = (jpeg_scan_info *) cinfo->scan_info; + idxout = 0; + + for (idxin = 0; idxin < cinfo->num_scans; idxin++) { + /* After skipping, idxout becomes smaller than idxin */ + if (idxin != idxout) + /* Copy rest of data; + * note we stay in given chunk of allocated memory. + */ + scanptr[idxout] = scanptr[idxin]; + if (scanptr[idxout].Ss > cinfo->lim_Se) + /* Entire scan out of range - skip this entry */ + continue; + if (scanptr[idxout].Se > cinfo->lim_Se) + /* Limit scan to end of block */ + scanptr[idxout].Se = cinfo->lim_Se; + idxout++; + } + + cinfo->num_scans = idxout; +} + +#endif /* C_MULTISCAN_FILES_SUPPORTED */ + + +LOCAL(void) +select_scan_parameters (j_compress_ptr cinfo) +/* Set up the scan parameters for the current scan */ +{ + int ci; + +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (cinfo->scan_info != NULL) { + /* Prepare for current scan --- the script is already validated */ + my_master_ptr master = (my_master_ptr) cinfo->master; + const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number; + + cinfo->comps_in_scan = scanptr->comps_in_scan; + for (ci = 0; ci < scanptr->comps_in_scan; ci++) { + cinfo->cur_comp_info[ci] = + &cinfo->comp_info[scanptr->component_index[ci]]; + } + if (cinfo->progressive_mode) { + cinfo->Ss = scanptr->Ss; + cinfo->Se = scanptr->Se; + cinfo->Ah = scanptr->Ah; + cinfo->Al = scanptr->Al; + return; + } + } + else +#endif + { + /* Prepare for single sequential-JPEG scan containing all components */ + if (cinfo->num_components > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPS_IN_SCAN); + cinfo->comps_in_scan = cinfo->num_components; + for (ci = 0; ci < cinfo->num_components; ci++) { + cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci]; + } + } + cinfo->Ss = 0; + cinfo->Se = cinfo->block_size * cinfo->block_size - 1; + cinfo->Ah = 0; + cinfo->Al = 0; +} + + +LOCAL(void) +per_scan_setup (j_compress_ptr cinfo) +/* Do computations that are needed before processing a JPEG scan */ +/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */ +{ + int ci, mcublks, tmp; + jpeg_component_info *compptr; + + if (cinfo->comps_in_scan == 1) { + + /* Noninterleaved (single-component) scan */ + compptr = cinfo->cur_comp_info[0]; + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = compptr->width_in_blocks; + cinfo->MCU_rows_in_scan = compptr->height_in_blocks; + + /* For noninterleaved scan, always one block per MCU */ + compptr->MCU_width = 1; + compptr->MCU_height = 1; + compptr->MCU_blocks = 1; + compptr->MCU_sample_width = compptr->DCT_h_scaled_size; + compptr->last_col_width = 1; + /* For noninterleaved scans, it is convenient to define last_row_height + * as the number of block rows present in the last iMCU row. + */ + tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (tmp == 0) tmp = compptr->v_samp_factor; + compptr->last_row_height = tmp; + + /* Prepare array describing MCU composition */ + cinfo->blocks_in_MCU = 1; + cinfo->MCU_membership[0] = 0; + + } else { + + /* Interleaved (multi-component) scan */ + if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, + MAX_COMPS_IN_SCAN); + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_width, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + cinfo->MCU_rows_in_scan = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + + cinfo->blocks_in_MCU = 0; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Sampling factors give # of blocks of component in each MCU */ + compptr->MCU_width = compptr->h_samp_factor; + compptr->MCU_height = compptr->v_samp_factor; + compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; + compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size; + /* Figure number of non-dummy blocks in last MCU column & row */ + tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); + if (tmp == 0) tmp = compptr->MCU_width; + compptr->last_col_width = tmp; + tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); + if (tmp == 0) tmp = compptr->MCU_height; + compptr->last_row_height = tmp; + /* Prepare array describing MCU composition */ + mcublks = compptr->MCU_blocks; + if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU) + ERREXIT(cinfo, JERR_BAD_MCU_SIZE); + while (mcublks-- > 0) { + cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; + } + } + + } + + /* Convert restart specified in rows to actual MCU count. */ + /* Note that count must fit in 16 bits, so we provide limiting. */ + if (cinfo->restart_in_rows > 0) { + long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row; + cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L); + } +} + + +/* + * Per-pass setup. + * This is called at the beginning of each pass. We determine which modules + * will be active during this pass and give them appropriate start_pass calls. + * We also set is_last_pass to indicate whether any more passes will be + * required. + */ + +METHODDEF(void) +prepare_for_pass (j_compress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + switch (master->pass_type) { + case main_pass: + /* Initial pass: will collect input data, and do either Huffman + * optimization or data output for the first scan. + */ + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + if (! cinfo->raw_data_in) { + (*cinfo->cconvert->start_pass) (cinfo); + (*cinfo->downsample->start_pass) (cinfo); + (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU); + } + (*cinfo->fdct->start_pass) (cinfo); + (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding); + (*cinfo->coef->start_pass) (cinfo, + (master->total_passes > 1 ? + JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); + (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); + if (cinfo->optimize_coding) { + /* No immediate data output; postpone writing frame/scan headers */ + master->pub.call_pass_startup = FALSE; + } else { + /* Will write frame/scan headers at first jpeg_write_scanlines call */ + master->pub.call_pass_startup = TRUE; + } + break; +#ifdef ENTROPY_OPT_SUPPORTED + case huff_opt_pass: + /* Do Huffman optimization for a scan after the first one. */ + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + if (cinfo->Ss != 0 || cinfo->Ah == 0) { + (*cinfo->entropy->start_pass) (cinfo, TRUE); + (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); + master->pub.call_pass_startup = FALSE; + break; + } + /* Special case: Huffman DC refinement scans need no Huffman table + * and therefore we can skip the optimization pass for them. + */ + master->pass_type = output_pass; + master->pass_number++; + /*FALLTHROUGH*/ +#endif + case output_pass: + /* Do a data-output pass. */ + /* We need not repeat per-scan setup if prior optimization pass did it. */ + if (! cinfo->optimize_coding) { + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + } + (*cinfo->entropy->start_pass) (cinfo, FALSE); + (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); + /* We emit frame/scan headers now */ + if (master->scan_number == 0) + (*cinfo->marker->write_frame_header) (cinfo); + (*cinfo->marker->write_scan_header) (cinfo); + master->pub.call_pass_startup = FALSE; + break; + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + } + + master->pub.is_last_pass = (master->pass_number == master->total_passes-1); + + /* Set up progress monitor's pass info if present */ + if (cinfo->progress != NULL) { + cinfo->progress->completed_passes = master->pass_number; + cinfo->progress->total_passes = master->total_passes; + } +} + + +/* + * Special start-of-pass hook. + * This is called by jpeg_write_scanlines if call_pass_startup is TRUE. + * In single-pass processing, we need this hook because we don't want to + * write frame/scan headers during jpeg_start_compress; we want to let the + * application write COM markers etc. between jpeg_start_compress and the + * jpeg_write_scanlines loop. + * In multi-pass processing, this routine is not used. + */ + +METHODDEF(void) +pass_startup (j_compress_ptr cinfo) +{ + cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */ + + (*cinfo->marker->write_frame_header) (cinfo); + (*cinfo->marker->write_scan_header) (cinfo); +} + + +/* + * Finish up at end of pass. + */ + +METHODDEF(void) +finish_pass_master (j_compress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + /* The entropy coder always needs an end-of-pass call, + * either to analyze statistics or to flush its output buffer. + */ + (*cinfo->entropy->finish_pass) (cinfo); + + /* Update state for next pass */ + switch (master->pass_type) { + case main_pass: + /* next pass is either output of scan 0 (after optimization) + * or output of scan 1 (if no optimization). + */ + master->pass_type = output_pass; + if (! cinfo->optimize_coding) + master->scan_number++; + break; + case huff_opt_pass: + /* next pass is always output of current scan */ + master->pass_type = output_pass; + break; + case output_pass: + /* next pass is either optimization or output of next scan */ + if (cinfo->optimize_coding) + master->pass_type = huff_opt_pass; + master->scan_number++; + break; + } + + master->pass_number++; +} + + +/* + * Initialize master compression control. + */ + +GLOBAL(void) +jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only) +{ + my_master_ptr master; + + master = (my_master_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_comp_master)); + cinfo->master = (struct jpeg_comp_master *) master; + master->pub.prepare_for_pass = prepare_for_pass; + master->pub.pass_startup = pass_startup; + master->pub.finish_pass = finish_pass_master; + master->pub.is_last_pass = FALSE; + + /* Validate parameters, determine derived values */ + initial_setup(cinfo, transcode_only); + + if (cinfo->scan_info != NULL) { +#ifdef C_MULTISCAN_FILES_SUPPORTED + validate_script(cinfo); + if (cinfo->block_size < DCTSIZE) + reduce_script(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + cinfo->progressive_mode = FALSE; + cinfo->num_scans = 1; + } + + if ((cinfo->progressive_mode || cinfo->block_size < DCTSIZE) && + !cinfo->arith_code) /* TEMPORARY HACK ??? */ + /* assume default tables no good for progressive or downscale mode */ + cinfo->optimize_coding = TRUE; + + /* Initialize my private state */ + if (transcode_only) { + /* no main pass in transcoding */ + if (cinfo->optimize_coding) + master->pass_type = huff_opt_pass; + else + master->pass_type = output_pass; + } else { + /* for normal compression, first pass is always this type: */ + master->pass_type = main_pass; + } + master->scan_number = 0; + master->pass_number = 0; + if (cinfo->optimize_coding) + master->total_passes = cinfo->num_scans * 2; + else + master->total_passes = cinfo->num_scans; +} diff --git a/src/SDL2/external/jpeg-9/jcomapi.c b/src/SDL2/external/jpeg-9/jcomapi.c new file mode 100644 index 000000000..9b1fa7568 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcomapi.c @@ -0,0 +1,106 @@ +/* + * jcomapi.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface routines that are used for both + * compression and decompression. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Abort processing of a JPEG compression or decompression operation, + * but don't destroy the object itself. + * + * For this, we merely clean up all the nonpermanent memory pools. + * Note that temp files (virtual arrays) are not allowed to belong to + * the permanent pool, so we will be able to close all temp files here. + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL(void) +jpeg_abort (j_common_ptr cinfo) +{ + int pool; + + /* Do nothing if called on a not-initialized or destroyed JPEG object. */ + if (cinfo->mem == NULL) + return; + + /* Releasing pools in reverse order might help avoid fragmentation + * with some (brain-damaged) malloc libraries. + */ + for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) { + (*cinfo->mem->free_pool) (cinfo, pool); + } + + /* Reset overall state for possible reuse of object */ + if (cinfo->is_decompressor) { + cinfo->global_state = DSTATE_START; + /* Try to keep application from accessing now-deleted marker list. + * A bit kludgy to do it here, but this is the most central place. + */ + ((j_decompress_ptr) cinfo)->marker_list = NULL; + } else { + cinfo->global_state = CSTATE_START; + } +} + + +/* + * Destruction of a JPEG object. + * + * Everything gets deallocated except the master jpeg_compress_struct itself + * and the error manager struct. Both of these are supplied by the application + * and must be freed, if necessary, by the application. (Often they are on + * the stack and so don't need to be freed anyway.) + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL(void) +jpeg_destroy (j_common_ptr cinfo) +{ + /* We need only tell the memory manager to release everything. */ + /* NB: mem pointer is NULL if memory mgr failed to initialize. */ + if (cinfo->mem != NULL) + (*cinfo->mem->self_destruct) (cinfo); + cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */ + cinfo->global_state = 0; /* mark it destroyed */ +} + + +/* + * Convenience routines for allocating quantization and Huffman tables. + * (Would jutils.c be a more reasonable place to put these?) + */ + +GLOBAL(JQUANT_TBL *) +jpeg_alloc_quant_table (j_common_ptr cinfo) +{ + JQUANT_TBL *tbl; + + tbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} + + +GLOBAL(JHUFF_TBL *) +jpeg_alloc_huff_table (j_common_ptr cinfo) +{ + JHUFF_TBL *tbl; + + tbl = (JHUFF_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} diff --git a/src/SDL2/external/jpeg-9/jconfig.bcc b/src/SDL2/external/jpeg-9/jconfig.bcc new file mode 100644 index 000000000..e4da3d72c --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.bcc @@ -0,0 +1,48 @@ +/* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#ifdef __MSDOS__ +#define NEED_FAR_POINTERS /* for small or medium memory model */ +#endif +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN /* this assumes you have -w-stu in CFLAGS */ + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#ifdef __MSDOS__ +#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ +#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ +#define USE_FMEM /* Borland has _fmemcpy() and _fmemset() */ +#endif + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define USE_SETMODE /* Borland has setmode() */ +#ifdef __MSDOS__ +#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ +#endif +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.cfg b/src/SDL2/external/jpeg-9/jconfig.cfg new file mode 100644 index 000000000..bb7435c9f --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.cfg @@ -0,0 +1,53 @@ +/* jconfig.cfg --- source file edited by configure script */ +/* see jconfig.txt for explanations */ + +#undef HAVE_PROTOTYPES +#undef HAVE_UNSIGNED_CHAR +#undef HAVE_UNSIGNED_SHORT +#undef void +#undef const +#undef CHAR_IS_UNSIGNED +#undef HAVE_STDDEF_H +#undef HAVE_STDLIB_H +#undef HAVE_LOCALE_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +/* Define this if you get warnings about undefined structures. */ +#undef INCOMPLETE_TYPES_BROKEN + +/* Define "boolean" as unsigned char, not int, on Windows systems. */ +#ifdef _WIN32 +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +#endif + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED +#undef INLINE +/* These are for configuring the JPEG memory manager. */ +#undef DEFAULT_MAX_MEM +#undef NO_MKTEMP + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE + +/* Define this if you want percent-done progress reports from cjpeg/djpeg. */ +#undef PROGRESS_REPORT + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.dj b/src/SDL2/external/jpeg-9/jconfig.dj new file mode 100644 index 000000000..a0d4092f2 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.dj @@ -0,0 +1,38 @@ +/* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* DJGPP uses flat 32-bit addressing */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Needed to make one-file style work in DJGPP */ +#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.h b/src/SDL2/external/jpeg-9/jconfig.h new file mode 100644 index 000000000..15a98177b --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.h @@ -0,0 +1,156 @@ +/* android jconfig.h */ +/* + * jconfig.doc + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file documents the configuration options that are required to + * customize the JPEG software for a particular system. + * + * The actual configuration options for a particular installation are stored + * in jconfig.h. On many machines, jconfig.h can be generated automatically + * or copied from one of the "canned" jconfig files that we supply. But if + * you need to generate a jconfig.h file by hand, this file tells you how. + * + * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING. + * EDIT A COPY NAMED JCONFIG.H. + */ + + +/* + * These symbols indicate the properties of your machine or compiler. + * #define the symbol if yes, #undef it if no. + */ + +/* Does your compiler support function prototypes? + * (If not, you also need to use ansi2knr, see install.doc) + */ +#define HAVE_PROTOTYPES + +/* Does your compiler support the declaration "unsigned char" ? + * How about "unsigned short" ? + */ +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT + +/* Define "void" as "char" if your compiler doesn't know about type void. + * NOTE: be sure to define void such that "void *" represents the most general + * pointer type, e.g., that returned by malloc(). + */ +/* #define void char */ + +/* Define "const" as empty if your compiler doesn't know the "const" keyword. + */ +/* #define const */ + +/* Define this if an ordinary "char" type is unsigned. + * If you're not sure, leaving it undefined will work at some cost in speed. + * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal. + */ +#undef CHAR_IS_UNSIGNED + +/* Define this if your system has an ANSI-conforming file. + */ +#define HAVE_STDDEF_H + +/* Define this if your system has an ANSI-conforming file. + */ +#define HAVE_STDLIB_H + +/* Define this if your system does not have an ANSI/SysV , + * but does have a BSD-style . + */ +#undef NEED_BSD_STRINGS + +/* Define this if your system does not provide typedef size_t in any of the + * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in + * instead. + */ +#undef NEED_SYS_TYPES_H + +/* For 80x86 machines, you need to define NEED_FAR_POINTERS, + * unless you are using a large-data memory model or 80386 flat-memory mode. + * On less brain-damaged CPUs this symbol must not be defined. + * (Defining this symbol causes large data structures to be referenced through + * "far" pointers and to be allocated with a special version of malloc.) + */ +#undef NEED_FAR_POINTERS + +/* Define this if your linker needs global names to be unique in less + * than the first 15 characters. + */ +#undef NEED_SHORT_EXTERNAL_NAMES + +/* Although a real ANSI C compiler can deal perfectly well with pointers to + * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI + * and pseudo-ANSI compilers get confused. To keep one of these bozos happy, + * define INCOMPLETE_TYPES_BROKEN. This is not recommended unless you + * actually get "missing structure definition" warnings or errors while + * compiling the JPEG code. + */ +#undef INCOMPLETE_TYPES_BROKEN + + +/* + * The following options affect code selection within the JPEG library, + * but they don't need to be visible to applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS has been defined. + */ + +#ifdef JPEG_INTERNALS + +/* Define this if your compiler implements ">>" on signed values as a logical + * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift, + * which is the normal and rational definition. + */ +#undef RIGHT_SHIFT_IS_UNSIGNED + + +#endif /* JPEG_INTERNALS */ + + +/* + * The remaining options do not affect the JPEG library proper, + * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c). + * Other applications can ignore these. + */ + +#ifdef JPEG_CJPEG_DJPEG + +/* These defines indicate which image (non-JPEG) file formats are allowed. */ + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +/* Define this if you want to name both input and output files on the command + * line, rather than using stdout and optionally stdin. You MUST do this if + * your system can't cope with binary I/O to stdin/stdout. See comments at + * head of cjpeg.c or djpeg.c. + */ +#undef TWO_FILE_COMMANDLINE + +/* Define this if your system needs explicit cleanup of temporary files. + * This is crucial under MS-DOS, where the temporary "files" may be areas + * of extended memory; on most other systems it's not as important. + */ +#undef NEED_SIGNAL_CATCHER + +/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb"). + * This is necessary on systems that distinguish text files from binary files, + * and is harmless on most systems that don't. If you have one of the rare + * systems that complains about the "b" spec, define this symbol. + */ +#undef DONT_USE_B_MODE + +/* Define this if you want percent-done progress reports from cjpeg/djpeg. + */ +#undef PROGRESS_REPORT + + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.mac b/src/SDL2/external/jpeg-9/jconfig.mac new file mode 100644 index 000000000..70ed66c18 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.mac @@ -0,0 +1,43 @@ +/* jconfig.mac --- jconfig.h for CodeWarrior on Apple Macintosh */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define USE_MAC_MEMMGR /* Define this if you use jmemmac.c */ + +#define ALIGN_TYPE long /* Needed for 680x0 Macs */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define USE_CCOMMAND /* Command line reader for Macintosh */ +#define TWO_FILE_COMMANDLINE /* Binary I/O thru stdin/stdout doesn't work */ + +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.manx b/src/SDL2/external/jpeg-9/jconfig.manx new file mode 100644 index 000000000..cd529d7d1 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.manx @@ -0,0 +1,43 @@ +/* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ + +#define SHORTxSHORT_32 /* produces better DCT code with Aztec C */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#define signal_catcher _abort /* hack for Aztec C naming requirements */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.mc6 b/src/SDL2/external/jpeg-9/jconfig.mc6 new file mode 100644 index 000000000..6b05e81b8 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.mc6 @@ -0,0 +1,52 @@ +/* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#define NEED_FAR_POINTERS /* for small or medium memory model */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ + +#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ + +#define USE_FMEM /* Microsoft has _fmemcpy() and _fmemset() */ + +#define NEED_FHEAPMIN /* far heap management routines are broken */ + +#define SHORTxLCONST_32 /* enable compiler-specific DCT optimization */ +/* Note: the above define is known to improve the code with Microsoft C 6.00A. + * I do not know whether it is good for later compiler versions. + * Please report any info on this point to jpeg-info@jpegclub.org. + */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define USE_SETMODE /* Microsoft has setmode() */ +#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.sas b/src/SDL2/external/jpeg-9/jconfig.sas new file mode 100644 index 000000000..b8a181925 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.sas @@ -0,0 +1,43 @@ +/* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ + +#define NO_MKTEMP /* SAS C doesn't have mktemp() */ + +#define SHORTxSHORT_32 /* produces better DCT code with SAS C */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.st b/src/SDL2/external/jpeg-9/jconfig.st new file mode 100644 index 000000000..5afa0b6ce --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.st @@ -0,0 +1,42 @@ +/* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#define INCOMPLETE_TYPES_BROKEN /* suppress undefined-structure warnings */ + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define ALIGN_TYPE long /* apparently double is a weird size? */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* optional -- undef if you like Unix style */ +/* Note: if you undef TWO_FILE_COMMANDLINE, you may need to define + * USE_SETMODE. Some Atari compilers require it, some do not. + */ +#define NEED_SIGNAL_CATCHER /* needed if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.txt b/src/SDL2/external/jpeg-9/jconfig.txt new file mode 100644 index 000000000..b96d31249 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.txt @@ -0,0 +1,164 @@ +/* + * jconfig.txt + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file documents the configuration options that are required to + * customize the JPEG software for a particular system. + * + * The actual configuration options for a particular installation are stored + * in jconfig.h. On many machines, jconfig.h can be generated automatically + * or copied from one of the "canned" jconfig files that we supply. But if + * you need to generate a jconfig.h file by hand, this file tells you how. + * + * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING. + * EDIT A COPY NAMED JCONFIG.H. + */ + + +/* + * These symbols indicate the properties of your machine or compiler. + * #define the symbol if yes, #undef it if no. + */ + +/* Does your compiler support function prototypes? + * (If not, you also need to use ansi2knr, see install.txt) + */ +#define HAVE_PROTOTYPES + +/* Does your compiler support the declaration "unsigned char" ? + * How about "unsigned short" ? + */ +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT + +/* Define "void" as "char" if your compiler doesn't know about type void. + * NOTE: be sure to define void such that "void *" represents the most general + * pointer type, e.g., that returned by malloc(). + */ +/* #define void char */ + +/* Define "const" as empty if your compiler doesn't know the "const" keyword. + */ +/* #define const */ + +/* Define this if an ordinary "char" type is unsigned. + * If you're not sure, leaving it undefined will work at some cost in speed. + * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal. + */ +#undef CHAR_IS_UNSIGNED + +/* Define this if your system has an ANSI-conforming file. + */ +#define HAVE_STDDEF_H + +/* Define this if your system has an ANSI-conforming file. + */ +#define HAVE_STDLIB_H + +/* Define this if your system does not have an ANSI/SysV , + * but does have a BSD-style . + */ +#undef NEED_BSD_STRINGS + +/* Define this if your system does not provide typedef size_t in any of the + * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in + * instead. + */ +#undef NEED_SYS_TYPES_H + +/* For 80x86 machines, you need to define NEED_FAR_POINTERS, + * unless you are using a large-data memory model or 80386 flat-memory mode. + * On less brain-damaged CPUs this symbol must not be defined. + * (Defining this symbol causes large data structures to be referenced through + * "far" pointers and to be allocated with a special version of malloc.) + */ +#undef NEED_FAR_POINTERS + +/* Define this if your linker needs global names to be unique in less + * than the first 15 characters. + */ +#undef NEED_SHORT_EXTERNAL_NAMES + +/* Although a real ANSI C compiler can deal perfectly well with pointers to + * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI + * and pseudo-ANSI compilers get confused. To keep one of these bozos happy, + * define INCOMPLETE_TYPES_BROKEN. This is not recommended unless you + * actually get "missing structure definition" warnings or errors while + * compiling the JPEG code. + */ +#undef INCOMPLETE_TYPES_BROKEN + +/* Define "boolean" as unsigned char, not int, on Windows systems. + */ +#ifdef _WIN32 +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +#endif + + +/* + * The following options affect code selection within the JPEG library, + * but they don't need to be visible to applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS has been defined. + */ + +#ifdef JPEG_INTERNALS + +/* Define this if your compiler implements ">>" on signed values as a logical + * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift, + * which is the normal and rational definition. + */ +#undef RIGHT_SHIFT_IS_UNSIGNED + + +#endif /* JPEG_INTERNALS */ + + +/* + * The remaining options do not affect the JPEG library proper, + * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c). + * Other applications can ignore these. + */ + +#ifdef JPEG_CJPEG_DJPEG + +/* These defines indicate which image (non-JPEG) file formats are allowed. */ + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +/* Define this if you want to name both input and output files on the command + * line, rather than using stdout and optionally stdin. You MUST do this if + * your system can't cope with binary I/O to stdin/stdout. See comments at + * head of cjpeg.c or djpeg.c. + */ +#undef TWO_FILE_COMMANDLINE + +/* Define this if your system needs explicit cleanup of temporary files. + * This is crucial under MS-DOS, where the temporary "files" may be areas + * of extended memory; on most other systems it's not as important. + */ +#undef NEED_SIGNAL_CATCHER + +/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb"). + * This is necessary on systems that distinguish text files from binary files, + * and is harmless on most systems that don't. If you have one of the rare + * systems that complains about the "b" spec, define this symbol. + */ +#undef DONT_USE_B_MODE + +/* Define this if you want percent-done progress reports from cjpeg/djpeg. + */ +#undef PROGRESS_REPORT + + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.vc b/src/SDL2/external/jpeg-9/jconfig.vc new file mode 100644 index 000000000..f15b418fa --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.vc @@ -0,0 +1,45 @@ +/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* we presume a 32-bit flat memory model */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +/* Define "boolean" as unsigned char, not enum, per Windows custom */ +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ + + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Microsoft has setmode() */ +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.vms b/src/SDL2/external/jpeg-9/jconfig.vms new file mode 100644 index 000000000..8337b0b69 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.vms @@ -0,0 +1,37 @@ +/* jconfig.vms --- jconfig.h for use on Digital VMS. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* Needed on VMS */ +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jconfig.wat b/src/SDL2/external/jpeg-9/jconfig.wat new file mode 100644 index 000000000..190cc75fd --- /dev/null +++ b/src/SDL2/external/jpeg-9/jconfig.wat @@ -0,0 +1,38 @@ +/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#define CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* Watcom uses flat 32-bit addressing */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Needed to make one-file style work in Watcom */ +#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/SDL2/external/jpeg-9/jcparam.c b/src/SDL2/external/jpeg-9/jcparam.c new file mode 100644 index 000000000..e530c3c4b --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcparam.c @@ -0,0 +1,637 @@ +/* + * jcparam.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2003-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains optional default-setting code for the JPEG compressor. + * Applications do not have to use this file, but those that don't use it + * must know a lot more about the innards of the JPEG code. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Quantization table setup routines + */ + +GLOBAL(void) +jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, boolean force_baseline) +/* Define a quantization table equal to the basic_table times + * a scale factor (given as a percentage). + * If force_baseline is TRUE, the computed quantization table entries + * are limited to 1..255 for JPEG baseline compatibility. + */ +{ + JQUANT_TBL ** qtblptr; + int i; + long temp; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS) + ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl); + + qtblptr = & cinfo->quant_tbl_ptrs[which_tbl]; + + if (*qtblptr == NULL) + *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo); + + for (i = 0; i < DCTSIZE2; i++) { + temp = ((long) basic_table[i] * scale_factor + 50L) / 100L; + /* limit the values to the valid range */ + if (temp <= 0L) temp = 1L; + if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */ + if (force_baseline && temp > 255L) + temp = 255L; /* limit to baseline range if requested */ + (*qtblptr)->quantval[i] = (UINT16) temp; + } + + /* Initialize sent_table FALSE so table will be written to JPEG file. */ + (*qtblptr)->sent_table = FALSE; +} + + +/* These are the sample quantization tables given in JPEG spec section K.1. + * The spec says that the values given produce "good" quality, and + * when divided by 2, "very good" quality. + */ +static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = { + 16, 11, 10, 16, 24, 40, 51, 61, + 12, 12, 14, 19, 26, 58, 60, 55, + 14, 13, 16, 24, 40, 57, 69, 56, + 14, 17, 22, 29, 51, 87, 80, 62, + 18, 22, 37, 56, 68, 109, 103, 77, + 24, 35, 55, 64, 81, 104, 113, 92, + 49, 64, 78, 87, 103, 121, 120, 101, + 72, 92, 95, 98, 112, 100, 103, 99 +}; +static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = { + 17, 18, 24, 47, 99, 99, 99, 99, + 18, 21, 26, 66, 99, 99, 99, 99, + 24, 26, 56, 99, 99, 99, 99, 99, + 47, 66, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99 +}; + + +GLOBAL(void) +jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables + * and straight percentage-scaling quality scales. + * This entry point allows different scalings for luminance and chrominance. + */ +{ + /* Set up two quantization tables using the specified scaling */ + jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, + cinfo->q_scale_factor[0], force_baseline); + jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, + cinfo->q_scale_factor[1], force_baseline); +} + + +GLOBAL(void) +jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, + boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables + * and a straight percentage-scaling quality scale. In most cases it's better + * to use jpeg_set_quality (below); this entry point is provided for + * applications that insist on a linear percentage scaling. + */ +{ + /* Set up two quantization tables using the specified scaling */ + jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, + scale_factor, force_baseline); + jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, + scale_factor, force_baseline); +} + + +GLOBAL(int) +jpeg_quality_scaling (int quality) +/* Convert a user-specified quality rating to a percentage scaling factor + * for an underlying quantization table, using our recommended scaling curve. + * The input 'quality' factor should be 0 (terrible) to 100 (very good). + */ +{ + /* Safety limit on quality factor. Convert 0 to 1 to avoid zero divide. */ + if (quality <= 0) quality = 1; + if (quality > 100) quality = 100; + + /* The basic table is used as-is (scaling 100) for a quality of 50. + * Qualities 50..100 are converted to scaling percentage 200 - 2*Q; + * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table + * to make all the table entries 1 (hence, minimum quantization loss). + * Qualities 1..50 are converted to scaling percentage 5000/Q. + */ + if (quality < 50) + quality = 5000 / quality; + else + quality = 200 - quality*2; + + return quality; +} + + +GLOBAL(void) +jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables. + * This is the standard quality-adjusting entry point for typical user + * interfaces; only those who want detailed control over quantization tables + * would use the preceding routines directly. + */ +{ + /* Convert user 0-100 rating to percentage scaling */ + quality = jpeg_quality_scaling(quality); + + /* Set up standard quality tables */ + jpeg_set_linear_quality(cinfo, quality, force_baseline); +} + + +/* + * Huffman table setup routines + */ + +LOCAL(void) +add_huff_table (j_compress_ptr cinfo, + JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val) +/* Define a Huffman table */ +{ + int nsymbols, len; + + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + + /* Copy the number-of-symbols-of-each-code-length counts */ + MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); + + /* Validate the counts. We do this here mainly so we can copy the right + * number of symbols from the val[] array, without risking marching off + * the end of memory. jchuff.c will do a more thorough test later. + */ + nsymbols = 0; + for (len = 1; len <= 16; len++) + nsymbols += bits[len]; + if (nsymbols < 1 || nsymbols > 256) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + + MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8)); + + /* Initialize sent_table FALSE so table will be written to JPEG file. */ + (*htblptr)->sent_table = FALSE; +} + + +LOCAL(void) +std_huff_tables (j_compress_ptr cinfo) +/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */ +/* IMPORTANT: these are only valid for 8-bit data precision! */ +{ + static const UINT8 bits_dc_luminance[17] = + { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }; + static const UINT8 val_dc_luminance[] = + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; + + static const UINT8 bits_dc_chrominance[17] = + { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }; + static const UINT8 val_dc_chrominance[] = + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; + + static const UINT8 bits_ac_luminance[17] = + { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d }; + static const UINT8 val_ac_luminance[] = + { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, + 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, + 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, + 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, + 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, + 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, + 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, + 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, + 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, + 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, + 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, + 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, + 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, + 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, + 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, + 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, + 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, + 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, + 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, + 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa }; + + static const UINT8 bits_ac_chrominance[17] = + { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 }; + static const UINT8 val_ac_chrominance[] = + { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, + 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, + 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, + 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, + 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, + 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38, + 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, + 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, + 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, + 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, + 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, + 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, + 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, + 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, + 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, + 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, + 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa }; + + add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0], + bits_dc_luminance, val_dc_luminance); + add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0], + bits_ac_luminance, val_ac_luminance); + add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1], + bits_dc_chrominance, val_dc_chrominance); + add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1], + bits_ac_chrominance, val_ac_chrominance); +} + + +/* + * Default parameter setup for compression. + * + * Applications that don't choose to use this routine must do their + * own setup of all these parameters. Alternately, you can call this + * to establish defaults and then alter parameters selectively. This + * is the recommended approach since, if we add any new parameters, + * your code will still work (they'll be set to reasonable defaults). + */ + +GLOBAL(void) +jpeg_set_defaults (j_compress_ptr cinfo) +{ + int i; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* Allocate comp_info array large enough for maximum component count. + * Array is made permanent in case application wants to compress + * multiple images at same param settings. + */ + if (cinfo->comp_info == NULL) + cinfo->comp_info = (jpeg_component_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + MAX_COMPONENTS * SIZEOF(jpeg_component_info)); + + /* Initialize everything not dependent on the color space */ + + cinfo->scale_num = 1; /* 1:1 scaling */ + cinfo->scale_denom = 1; + cinfo->data_precision = BITS_IN_JSAMPLE; + /* Set up two quantization tables using default quality of 75 */ + jpeg_set_quality(cinfo, 75, TRUE); + /* Set up two Huffman tables */ + std_huff_tables(cinfo); + + /* Initialize default arithmetic coding conditioning */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + cinfo->arith_dc_L[i] = 0; + cinfo->arith_dc_U[i] = 1; + cinfo->arith_ac_K[i] = 5; + } + + /* Default is no multiple-scan output */ + cinfo->scan_info = NULL; + cinfo->num_scans = 0; + + /* Expect normal source image, not raw downsampled data */ + cinfo->raw_data_in = FALSE; + + /* Use Huffman coding, not arithmetic coding, by default */ + cinfo->arith_code = FALSE; + + /* By default, don't do extra passes to optimize entropy coding */ + cinfo->optimize_coding = FALSE; + /* The standard Huffman tables are only valid for 8-bit data precision. + * If the precision is higher, force optimization on so that usable + * tables will be computed. This test can be removed if default tables + * are supplied that are valid for the desired precision. + */ + if (cinfo->data_precision > 8) + cinfo->optimize_coding = TRUE; + + /* By default, use the simpler non-cosited sampling alignment */ + cinfo->CCIR601_sampling = FALSE; + + /* By default, apply fancy downsampling */ + cinfo->do_fancy_downsampling = TRUE; + + /* No input smoothing */ + cinfo->smoothing_factor = 0; + + /* DCT algorithm preference */ + cinfo->dct_method = JDCT_DEFAULT; + + /* No restart markers */ + cinfo->restart_interval = 0; + cinfo->restart_in_rows = 0; + + /* Fill in default JFIF marker parameters. Note that whether the marker + * will actually be written is determined by jpeg_set_colorspace. + * + * By default, the library emits JFIF version code 1.01. + * An application that wants to emit JFIF 1.02 extension markers should set + * JFIF_minor_version to 2. We could probably get away with just defaulting + * to 1.02, but there may still be some decoders in use that will complain + * about that; saying 1.01 should minimize compatibility problems. + */ + cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */ + cinfo->JFIF_minor_version = 1; + cinfo->density_unit = 0; /* Pixel size is unknown by default */ + cinfo->X_density = 1; /* Pixel aspect ratio is square by default */ + cinfo->Y_density = 1; + + /* No color transform */ + cinfo->color_transform = JCT_NONE; + + /* Choose JPEG colorspace based on input space, set defaults accordingly */ + + jpeg_default_colorspace(cinfo); +} + + +/* + * Select an appropriate JPEG colorspace for in_color_space. + */ + +GLOBAL(void) +jpeg_default_colorspace (j_compress_ptr cinfo) +{ + switch (cinfo->in_color_space) { + case JCS_GRAYSCALE: + jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); + break; + case JCS_RGB: + jpeg_set_colorspace(cinfo, JCS_YCbCr); + break; + case JCS_YCbCr: + jpeg_set_colorspace(cinfo, JCS_YCbCr); + break; + case JCS_CMYK: + jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */ + break; + case JCS_YCCK: + jpeg_set_colorspace(cinfo, JCS_YCCK); + break; + case JCS_UNKNOWN: + jpeg_set_colorspace(cinfo, JCS_UNKNOWN); + break; + default: + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + } +} + + +/* + * Set the JPEG colorspace, and choose colorspace-dependent default values. + */ + +GLOBAL(void) +jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) +{ + jpeg_component_info * compptr; + int ci; + +#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl) \ + (compptr = &cinfo->comp_info[index], \ + compptr->component_id = (id), \ + compptr->h_samp_factor = (hsamp), \ + compptr->v_samp_factor = (vsamp), \ + compptr->quant_tbl_no = (quant), \ + compptr->dc_tbl_no = (dctbl), \ + compptr->ac_tbl_no = (actbl) ) + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* For all colorspaces, we use Q and Huff tables 0 for luminance components, + * tables 1 for chrominance components. + */ + + cinfo->jpeg_color_space = colorspace; + + cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */ + cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */ + + switch (colorspace) { + case JCS_GRAYSCALE: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->num_components = 1; + /* JFIF specifies component ID 1 */ + SET_COMP(0, 1, 1,1, 0, 0,0); + break; + case JCS_RGB: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */ + cinfo->num_components = 3; + SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0); + SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0); + SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0); + break; + case JCS_YCbCr: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->num_components = 3; + /* JFIF specifies component IDs 1,2,3 */ + /* We default to 2x2 subsamples of chrominance */ + SET_COMP(0, 1, 2,2, 0, 0,0); + SET_COMP(1, 2, 1,1, 1, 1,1); + SET_COMP(2, 3, 1,1, 1, 1,1); + break; + case JCS_CMYK: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */ + cinfo->num_components = 4; + SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0); + SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0); + SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0); + SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0); + break; + case JCS_YCCK: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */ + cinfo->num_components = 4; + SET_COMP(0, 1, 2,2, 0, 0,0); + SET_COMP(1, 2, 1,1, 1, 1,1); + SET_COMP(2, 3, 1,1, 1, 1,1); + SET_COMP(3, 4, 2,2, 0, 0,0); + break; + case JCS_UNKNOWN: + cinfo->num_components = cinfo->input_components; + if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + for (ci = 0; ci < cinfo->num_components; ci++) { + SET_COMP(ci, ci, 1,1, 0, 0,0); + } + break; + default: + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + } +} + + +#ifdef C_PROGRESSIVE_SUPPORTED + +LOCAL(jpeg_scan_info *) +fill_a_scan (jpeg_scan_info * scanptr, int ci, + int Ss, int Se, int Ah, int Al) +/* Support routine: generate one scan for specified component */ +{ + scanptr->comps_in_scan = 1; + scanptr->component_index[0] = ci; + scanptr->Ss = Ss; + scanptr->Se = Se; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + return scanptr; +} + +LOCAL(jpeg_scan_info *) +fill_scans (jpeg_scan_info * scanptr, int ncomps, + int Ss, int Se, int Ah, int Al) +/* Support routine: generate one scan for each component */ +{ + int ci; + + for (ci = 0; ci < ncomps; ci++) { + scanptr->comps_in_scan = 1; + scanptr->component_index[0] = ci; + scanptr->Ss = Ss; + scanptr->Se = Se; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + } + return scanptr; +} + +LOCAL(jpeg_scan_info *) +fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al) +/* Support routine: generate interleaved DC scan if possible, else N scans */ +{ + int ci; + + if (ncomps <= MAX_COMPS_IN_SCAN) { + /* Single interleaved DC scan */ + scanptr->comps_in_scan = ncomps; + for (ci = 0; ci < ncomps; ci++) + scanptr->component_index[ci] = ci; + scanptr->Ss = scanptr->Se = 0; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + } else { + /* Noninterleaved DC scan for each component */ + scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al); + } + return scanptr; +} + + +/* + * Create a recommended progressive-JPEG script. + * cinfo->num_components and cinfo->jpeg_color_space must be correct. + */ + +GLOBAL(void) +jpeg_simple_progression (j_compress_ptr cinfo) +{ + int ncomps = cinfo->num_components; + int nscans; + jpeg_scan_info * scanptr; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* Figure space needed for script. Calculation must match code below! */ + if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { + /* Custom script for YCbCr color images. */ + nscans = 10; + } else { + /* All-purpose script for other color spaces. */ + if (ncomps > MAX_COMPS_IN_SCAN) + nscans = 6 * ncomps; /* 2 DC + 4 AC scans per component */ + else + nscans = 2 + 4 * ncomps; /* 2 DC scans; 4 AC scans per component */ + } + + /* Allocate space for script. + * We need to put it in the permanent pool in case the application performs + * multiple compressions without changing the settings. To avoid a memory + * leak if jpeg_simple_progression is called repeatedly for the same JPEG + * object, we try to re-use previously allocated space, and we allocate + * enough space to handle YCbCr even if initially asked for grayscale. + */ + if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) { + cinfo->script_space_size = MAX(nscans, 10); + cinfo->script_space = (jpeg_scan_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + cinfo->script_space_size * SIZEOF(jpeg_scan_info)); + } + scanptr = cinfo->script_space; + cinfo->scan_info = scanptr; + cinfo->num_scans = nscans; + + if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { + /* Custom script for YCbCr color images. */ + /* Initial DC scan */ + scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); + /* Initial AC scan: get some luma data out in a hurry */ + scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2); + /* Chroma data is too small to be worth expending many scans on */ + scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1); + scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1); + /* Complete spectral selection for luma AC */ + scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2); + /* Refine next bit of luma AC */ + scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1); + /* Finish DC successive approximation */ + scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); + /* Finish AC successive approximation */ + scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0); + scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0); + /* Luma bottom bit comes last since it's usually largest scan */ + scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0); + } else { + /* All-purpose script for other color spaces. */ + /* Successive approximation first pass */ + scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); + scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2); + scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2); + /* Successive approximation second pass */ + scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1); + /* Successive approximation final pass */ + scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); + scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0); + } +} + +#endif /* C_PROGRESSIVE_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/jcprepct.c b/src/SDL2/external/jpeg-9/jcprepct.c new file mode 100644 index 000000000..be44cc4b4 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcprepct.c @@ -0,0 +1,358 @@ +/* + * jcprepct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the compression preprocessing controller. + * This controller manages the color conversion, downsampling, + * and edge expansion steps. + * + * Most of the complexity here is associated with buffering input rows + * as required by the downsampler. See the comments at the head of + * jcsample.c for the downsampler's needs. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* At present, jcsample.c can request context rows only for smoothing. + * In the future, we might also need context rows for CCIR601 sampling + * or other more-complex downsampling procedures. The code to support + * context rows should be compiled only if needed. + */ +#ifdef INPUT_SMOOTHING_SUPPORTED +#define CONTEXT_ROWS_SUPPORTED +#endif + + +/* + * For the simple (no-context-row) case, we just need to buffer one + * row group's worth of pixels for the downsampling step. At the bottom of + * the image, we pad to a full row group by replicating the last pixel row. + * The downsampler's last output row is then replicated if needed to pad + * out to a full iMCU row. + * + * When providing context rows, we must buffer three row groups' worth of + * pixels. Three row groups are physically allocated, but the row pointer + * arrays are made five row groups high, with the extra pointers above and + * below "wrapping around" to point to the last and first real row groups. + * This allows the downsampler to access the proper context rows. + * At the top and bottom of the image, we create dummy context rows by + * copying the first or last real pixel row. This copying could be avoided + * by pointer hacking as is done in jdmainct.c, but it doesn't seem worth the + * trouble on the compression side. + */ + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_prep_controller pub; /* public fields */ + + /* Downsampling input buffer. This buffer holds color-converted data + * until we have enough to do a downsample step. + */ + JSAMPARRAY color_buf[MAX_COMPONENTS]; + + JDIMENSION rows_to_go; /* counts rows remaining in source image */ + int next_buf_row; /* index of next row to store in color_buf */ + +#ifdef CONTEXT_ROWS_SUPPORTED /* only needed for context case */ + int this_row_group; /* starting row index of group to process */ + int next_buf_stop; /* downsample when we reach this index */ +#endif +} my_prep_controller; + +typedef my_prep_controller * my_prep_ptr; + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_prep (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + + if (pass_mode != JBUF_PASS_THRU) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + /* Initialize total-height counter for detecting bottom of image */ + prep->rows_to_go = cinfo->image_height; + /* Mark the conversion buffer empty */ + prep->next_buf_row = 0; +#ifdef CONTEXT_ROWS_SUPPORTED + /* Preset additional state variables for context mode. + * These aren't used in non-context mode, so we needn't test which mode. + */ + prep->this_row_group = 0; + /* Set next_buf_stop to stop after two row groups have been read in. */ + prep->next_buf_stop = 2 * cinfo->max_v_samp_factor; +#endif +} + + +/* + * Expand an image vertically from height input_rows to height output_rows, + * by duplicating the bottom row. + */ + +LOCAL(void) +expand_bottom_edge (JSAMPARRAY image_data, JDIMENSION num_cols, + int input_rows, int output_rows) +{ + register int row; + + for (row = input_rows; row < output_rows; row++) { + jcopy_sample_rows(image_data, input_rows-1, image_data, row, + 1, num_cols); + } +} + + +/* + * Process some data in the simple no-context case. + * + * Preprocessor output data is counted in "row groups". A row group + * is defined to be v_samp_factor sample rows of each component. + * Downsampling will produce this much data from each max_v_samp_factor + * input rows. + */ + +METHODDEF(void) +pre_process_data (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int numrows, ci; + JDIMENSION inrows; + jpeg_component_info * compptr; + + while (*in_row_ctr < in_rows_avail && + *out_row_group_ctr < out_row_groups_avail) { + /* Do color conversion to fill the conversion buffer. */ + inrows = in_rows_avail - *in_row_ctr; + numrows = cinfo->max_v_samp_factor - prep->next_buf_row; + numrows = (int) MIN((JDIMENSION) numrows, inrows); + (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, + prep->color_buf, + (JDIMENSION) prep->next_buf_row, + numrows); + *in_row_ctr += numrows; + prep->next_buf_row += numrows; + prep->rows_to_go -= numrows; + /* If at bottom of image, pad to fill the conversion buffer. */ + if (prep->rows_to_go == 0 && + prep->next_buf_row < cinfo->max_v_samp_factor) { + for (ci = 0; ci < cinfo->num_components; ci++) { + expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, + prep->next_buf_row, cinfo->max_v_samp_factor); + } + prep->next_buf_row = cinfo->max_v_samp_factor; + } + /* If we've filled the conversion buffer, empty it. */ + if (prep->next_buf_row == cinfo->max_v_samp_factor) { + (*cinfo->downsample->downsample) (cinfo, + prep->color_buf, (JDIMENSION) 0, + output_buf, *out_row_group_ctr); + prep->next_buf_row = 0; + (*out_row_group_ctr)++; + } + /* If at bottom of image, pad the output to a full iMCU height. + * Note we assume the caller is providing a one-iMCU-height output buffer! + */ + if (prep->rows_to_go == 0 && + *out_row_group_ctr < out_row_groups_avail) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + numrows = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; + expand_bottom_edge(output_buf[ci], + compptr->width_in_blocks * compptr->DCT_h_scaled_size, + (int) (*out_row_group_ctr * numrows), + (int) (out_row_groups_avail * numrows)); + } + *out_row_group_ctr = out_row_groups_avail; + break; /* can exit outer loop without test */ + } + } +} + + +#ifdef CONTEXT_ROWS_SUPPORTED + +/* + * Process some data in the context case. + */ + +METHODDEF(void) +pre_process_context (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int numrows, ci; + int buf_height = cinfo->max_v_samp_factor * 3; + JDIMENSION inrows; + + while (*out_row_group_ctr < out_row_groups_avail) { + if (*in_row_ctr < in_rows_avail) { + /* Do color conversion to fill the conversion buffer. */ + inrows = in_rows_avail - *in_row_ctr; + numrows = prep->next_buf_stop - prep->next_buf_row; + numrows = (int) MIN((JDIMENSION) numrows, inrows); + (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, + prep->color_buf, + (JDIMENSION) prep->next_buf_row, + numrows); + /* Pad at top of image, if first time through */ + if (prep->rows_to_go == cinfo->image_height) { + for (ci = 0; ci < cinfo->num_components; ci++) { + int row; + for (row = 1; row <= cinfo->max_v_samp_factor; row++) { + jcopy_sample_rows(prep->color_buf[ci], 0, + prep->color_buf[ci], -row, + 1, cinfo->image_width); + } + } + } + *in_row_ctr += numrows; + prep->next_buf_row += numrows; + prep->rows_to_go -= numrows; + } else { + /* Return for more data, unless we are at the bottom of the image. */ + if (prep->rows_to_go != 0) + break; + /* When at bottom of image, pad to fill the conversion buffer. */ + if (prep->next_buf_row < prep->next_buf_stop) { + for (ci = 0; ci < cinfo->num_components; ci++) { + expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, + prep->next_buf_row, prep->next_buf_stop); + } + prep->next_buf_row = prep->next_buf_stop; + } + } + /* If we've gotten enough data, downsample a row group. */ + if (prep->next_buf_row == prep->next_buf_stop) { + (*cinfo->downsample->downsample) (cinfo, + prep->color_buf, + (JDIMENSION) prep->this_row_group, + output_buf, *out_row_group_ctr); + (*out_row_group_ctr)++; + /* Advance pointers with wraparound as necessary. */ + prep->this_row_group += cinfo->max_v_samp_factor; + if (prep->this_row_group >= buf_height) + prep->this_row_group = 0; + if (prep->next_buf_row >= buf_height) + prep->next_buf_row = 0; + prep->next_buf_stop = prep->next_buf_row + cinfo->max_v_samp_factor; + } + } +} + + +/* + * Create the wrapped-around downsampling input buffer needed for context mode. + */ + +LOCAL(void) +create_context_buffer (j_compress_ptr cinfo) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int rgroup_height = cinfo->max_v_samp_factor; + int ci, i; + jpeg_component_info * compptr; + JSAMPARRAY true_buffer, fake_buffer; + + /* Grab enough space for fake row pointers for all the components; + * we need five row groups' worth of pointers for each component. + */ + fake_buffer = (JSAMPARRAY) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (cinfo->num_components * 5 * rgroup_height) * + SIZEOF(JSAMPROW)); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate the actual buffer space (3 row groups) for this component. + * We make the buffer wide enough to allow the downsampler to edge-expand + * horizontally within the buffer, if it so chooses. + */ + true_buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (((long) compptr->width_in_blocks * + cinfo->min_DCT_h_scaled_size * + cinfo->max_h_samp_factor) / compptr->h_samp_factor), + (JDIMENSION) (3 * rgroup_height)); + /* Copy true buffer row pointers into the middle of the fake row array */ + MEMCOPY(fake_buffer + rgroup_height, true_buffer, + 3 * rgroup_height * SIZEOF(JSAMPROW)); + /* Fill in the above and below wraparound pointers */ + for (i = 0; i < rgroup_height; i++) { + fake_buffer[i] = true_buffer[2 * rgroup_height + i]; + fake_buffer[4 * rgroup_height + i] = true_buffer[i]; + } + prep->color_buf[ci] = fake_buffer + rgroup_height; + fake_buffer += 5 * rgroup_height; /* point to space for next component */ + } +} + +#endif /* CONTEXT_ROWS_SUPPORTED */ + + +/* + * Initialize preprocessing controller. + */ + +GLOBAL(void) +jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_prep_ptr prep; + int ci; + jpeg_component_info * compptr; + + if (need_full_buffer) /* safety check */ + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + prep = (my_prep_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_prep_controller)); + cinfo->prep = (struct jpeg_c_prep_controller *) prep; + prep->pub.start_pass = start_pass_prep; + + /* Allocate the color conversion buffer. + * We make the buffer wide enough to allow the downsampler to edge-expand + * horizontally within the buffer, if it so chooses. + */ + if (cinfo->downsample->need_context_rows) { + /* Set up to provide context rows */ +#ifdef CONTEXT_ROWS_SUPPORTED + prep->pub.pre_process_data = pre_process_context; + create_context_buffer(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + /* No context, just make it tall enough for one row group */ + prep->pub.pre_process_data = pre_process_data; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + prep->color_buf[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (((long) compptr->width_in_blocks * + cinfo->min_DCT_h_scaled_size * + cinfo->max_h_samp_factor) / compptr->h_samp_factor), + (JDIMENSION) cinfo->max_v_samp_factor); + } + } +} diff --git a/src/SDL2/external/jpeg-9/jcsample.c b/src/SDL2/external/jpeg-9/jcsample.c new file mode 100644 index 000000000..4d36f85f3 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jcsample.c @@ -0,0 +1,545 @@ +/* + * jcsample.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains downsampling routines. + * + * Downsampling input data is counted in "row groups". A row group + * is defined to be max_v_samp_factor pixel rows of each component, + * from which the downsampler produces v_samp_factor sample rows. + * A single row group is processed in each call to the downsampler module. + * + * The downsampler is responsible for edge-expansion of its output data + * to fill an integral number of DCT blocks horizontally. The source buffer + * may be modified if it is helpful for this purpose (the source buffer is + * allocated wide enough to correspond to the desired output width). + * The caller (the prep controller) is responsible for vertical padding. + * + * The downsampler may request "context rows" by setting need_context_rows + * during startup. In this case, the input arrays will contain at least + * one row group's worth of pixels above and below the passed-in data; + * the caller will create dummy rows at image top and bottom by replicating + * the first or last real pixel row. + * + * An excellent reference for image resampling is + * Digital Image Warping, George Wolberg, 1990. + * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. + * + * The downsampling algorithm used here is a simple average of the source + * pixels covered by the output pixel. The hi-falutin sampling literature + * refers to this as a "box filter". In general the characteristics of a box + * filter are not very good, but for the specific cases we normally use (1:1 + * and 2:1 ratios) the box is equivalent to a "triangle filter" which is not + * nearly so bad. If you intend to use other sampling ratios, you'd be well + * advised to improve this code. + * + * A simple input-smoothing capability is provided. This is mainly intended + * for cleaning up color-dithered GIF input files (if you find it inadequate, + * we suggest using an external filtering program such as pnmconvol). When + * enabled, each input pixel P is replaced by a weighted sum of itself and its + * eight neighbors. P's weight is 1-8*SF and each neighbor's weight is SF, + * where SF = (smoothing_factor / 1024). + * Currently, smoothing is only supported for 2h2v sampling factors. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Pointer to routine to downsample a single component */ +typedef JMETHOD(void, downsample1_ptr, + (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data)); + +/* Private subobject */ + +typedef struct { + struct jpeg_downsampler pub; /* public fields */ + + /* Downsampling method pointers, one per component */ + downsample1_ptr methods[MAX_COMPONENTS]; + + /* Height of an output row group for each component. */ + int rowgroup_height[MAX_COMPONENTS]; + + /* These arrays save pixel expansion factors so that int_downsample need not + * recompute them each time. They are unused for other downsampling methods. + */ + UINT8 h_expand[MAX_COMPONENTS]; + UINT8 v_expand[MAX_COMPONENTS]; +} my_downsampler; + +typedef my_downsampler * my_downsample_ptr; + + +/* + * Initialize for a downsampling pass. + */ + +METHODDEF(void) +start_pass_downsample (j_compress_ptr cinfo) +{ + /* no work for now */ +} + + +/* + * Expand a component horizontally from width input_cols to width output_cols, + * by duplicating the rightmost samples. + */ + +LOCAL(void) +expand_right_edge (JSAMPARRAY image_data, int num_rows, + JDIMENSION input_cols, JDIMENSION output_cols) +{ + register JSAMPROW ptr; + register JSAMPLE pixval; + register int count; + int row; + int numcols = (int) (output_cols - input_cols); + + if (numcols > 0) { + for (row = 0; row < num_rows; row++) { + ptr = image_data[row] + input_cols; + pixval = ptr[-1]; /* don't need GETJSAMPLE() here */ + for (count = numcols; count > 0; count--) + *ptr++ = pixval; + } + } +} + + +/* + * Do downsampling for a whole row group (all components). + * + * In this version we simply downsample each component independently. + */ + +METHODDEF(void) +sep_downsample (j_compress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_index, + JSAMPIMAGE output_buf, JDIMENSION out_row_group_index) +{ + my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; + int ci; + jpeg_component_info * compptr; + JSAMPARRAY in_ptr, out_ptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + in_ptr = input_buf[ci] + in_row_index; + out_ptr = output_buf[ci] + + (out_row_group_index * downsample->rowgroup_height[ci]); + (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr); + } +} + + +/* + * Downsample pixel values of a single component. + * One row group is processed per call. + * This version handles arbitrary integral sampling ratios, without smoothing. + * Note that this version is not actually used for customary sampling ratios. + */ + +METHODDEF(void) +int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; + int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v; + JDIMENSION outcol, outcol_h; /* outcol_h == outcol*h_expand */ + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + JSAMPROW inptr, outptr; + INT32 outvalue; + + h_expand = downsample->h_expand[compptr->component_index]; + v_expand = downsample->v_expand[compptr->component_index]; + numpix = h_expand * v_expand; + numpix2 = numpix/2; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * h_expand); + + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { + outptr = output_data[outrow]; + for (outcol = 0, outcol_h = 0; outcol < output_cols; + outcol++, outcol_h += h_expand) { + outvalue = 0; + for (v = 0; v < v_expand; v++) { + inptr = input_data[inrow+v] + outcol_h; + for (h = 0; h < h_expand; h++) { + outvalue += (INT32) GETJSAMPLE(*inptr++); + } + } + *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix); + } + inrow += v_expand; + outrow++; + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the special case of a full-size component, + * without smoothing. + */ + +METHODDEF(void) +fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + /* Copy the data */ + jcopy_sample_rows(input_data, 0, output_data, 0, + cinfo->max_v_samp_factor, cinfo->image_width); + /* Edge-expand */ + expand_right_edge(output_data, cinfo->max_v_samp_factor, cinfo->image_width, + compptr->width_in_blocks * compptr->DCT_h_scaled_size); +} + + +/* + * Downsample pixel values of a single component. + * This version handles the common case of 2:1 horizontal and 1:1 vertical, + * without smoothing. + * + * A note about the "bias" calculations: when rounding fractional values to + * integer, we do not want to always round 0.5 up to the next integer. + * If we did that, we'd introduce a noticeable bias towards larger values. + * Instead, this code is arranged so that 0.5 will be rounded up or down at + * alternate pixel locations (a simple ordered dither pattern). + */ + +METHODDEF(void) +h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow; + JDIMENSION outcol; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr, outptr; + register int bias; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * 2); + + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + outptr = output_data[inrow]; + inptr = input_data[inrow]; + bias = 0; /* bias = 0,1,0,1,... for successive samples */ + for (outcol = 0; outcol < output_cols; outcol++) { + *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1]) + + bias) >> 1); + bias ^= 1; /* 0=>1, 1=>0 */ + inptr += 2; + } + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the standard case of 2:1 horizontal and 2:1 vertical, + * without smoothing. + */ + +METHODDEF(void) +h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow, outrow; + JDIMENSION outcol; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr0, inptr1, outptr; + register int bias; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * 2); + + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { + outptr = output_data[outrow]; + inptr0 = input_data[inrow]; + inptr1 = input_data[inrow+1]; + bias = 1; /* bias = 1,2,1,2,... for successive samples */ + for (outcol = 0; outcol < output_cols; outcol++) { + *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]) + + bias) >> 2); + bias ^= 3; /* 1=>2, 2=>1 */ + inptr0 += 2; inptr1 += 2; + } + inrow += 2; + outrow++; + } +} + + +#ifdef INPUT_SMOOTHING_SUPPORTED + +/* + * Downsample pixel values of a single component. + * This version handles the standard case of 2:1 horizontal and 2:1 vertical, + * with smoothing. One row of context is required. + */ + +METHODDEF(void) +h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow, outrow; + JDIMENSION colctr; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr; + INT32 membersum, neighsum, memberscale, neighscale; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, + cinfo->image_width, output_cols * 2); + + /* We don't bother to form the individual "smoothed" input pixel values; + * we can directly compute the output which is the average of the four + * smoothed values. Each of the four member pixels contributes a fraction + * (1-8*SF) to its own smoothed image and a fraction SF to each of the three + * other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final + * output. The four corner-adjacent neighbor pixels contribute a fraction + * SF to just one smoothed pixel, or SF/4 to the final output; while the + * eight edge-adjacent neighbors contribute SF to each of two smoothed + * pixels, or SF/2 overall. In order to use integer arithmetic, these + * factors are scaled by 2^16 = 65536. + * Also recall that SF = smoothing_factor / 1024. + */ + + memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */ + neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */ + + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { + outptr = output_data[outrow]; + inptr0 = input_data[inrow]; + inptr1 = input_data[inrow+1]; + above_ptr = input_data[inrow-1]; + below_ptr = input_data[inrow+2]; + + /* Special case for first column: pretend column -1 is same as column 0 */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[2]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[2]); + neighsum += neighsum; + neighsum += GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[2]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[2]); + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; + + for (colctr = output_cols - 2; colctr > 0; colctr--) { + /* sum of pixels directly mapped to this output element */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + /* sum of edge-neighbor pixels */ + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[2]) + + GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[2]); + /* The edge-neighbors count twice as much as corner-neighbors */ + neighsum += neighsum; + /* Add in the corner-neighbors */ + neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[2]) + + GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[2]); + /* form final output scaled up by 2^16 */ + membersum = membersum * memberscale + neighsum * neighscale; + /* round, descale and output it */ + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; + } + + /* Special case for last column */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[1]); + neighsum += neighsum; + neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[1]); + membersum = membersum * memberscale + neighsum * neighscale; + *outptr = (JSAMPLE) ((membersum + 32768) >> 16); + + inrow += 2; + outrow++; + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the special case of a full-size component, + * with smoothing. One row of context is required. + */ + +METHODDEF(void) +fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow; + JDIMENSION colctr; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr, above_ptr, below_ptr, outptr; + INT32 membersum, neighsum, memberscale, neighscale; + int colsum, lastcolsum, nextcolsum; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, + cinfo->image_width, output_cols); + + /* Each of the eight neighbor pixels contributes a fraction SF to the + * smoothed pixel, while the main pixel contributes (1-8*SF). In order + * to use integer arithmetic, these factors are multiplied by 2^16 = 65536. + * Also recall that SF = smoothing_factor / 1024. + */ + + memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */ + neighscale = cinfo->smoothing_factor * 64; /* scaled SF */ + + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + outptr = output_data[inrow]; + inptr = input_data[inrow]; + above_ptr = input_data[inrow-1]; + below_ptr = input_data[inrow+1]; + + /* Special case for first column */ + colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) + + GETJSAMPLE(*inptr); + membersum = GETJSAMPLE(*inptr++); + nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + + GETJSAMPLE(*inptr); + neighsum = colsum + (colsum - membersum) + nextcolsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + lastcolsum = colsum; colsum = nextcolsum; + + for (colctr = output_cols - 2; colctr > 0; colctr--) { + membersum = GETJSAMPLE(*inptr++); + above_ptr++; below_ptr++; + nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + + GETJSAMPLE(*inptr); + neighsum = lastcolsum + (colsum - membersum) + nextcolsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + lastcolsum = colsum; colsum = nextcolsum; + } + + /* Special case for last column */ + membersum = GETJSAMPLE(*inptr); + neighsum = lastcolsum + (colsum - membersum) + colsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr = (JSAMPLE) ((membersum + 32768) >> 16); + + } +} + +#endif /* INPUT_SMOOTHING_SUPPORTED */ + + +/* + * Module initialization routine for downsampling. + * Note that we must select a routine for each component. + */ + +GLOBAL(void) +jinit_downsampler (j_compress_ptr cinfo) +{ + my_downsample_ptr downsample; + int ci; + jpeg_component_info * compptr; + boolean smoothok = TRUE; + int h_in_group, v_in_group, h_out_group, v_out_group; + + downsample = (my_downsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_downsampler)); + cinfo->downsample = (struct jpeg_downsampler *) downsample; + downsample->pub.start_pass = start_pass_downsample; + downsample->pub.downsample = sep_downsample; + downsample->pub.need_context_rows = FALSE; + + if (cinfo->CCIR601_sampling) + ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); + + /* Verify we can handle the sampling factors, and set up method pointers */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Compute size of an "output group" for DCT scaling. This many samples + * are to be converted from max_h_samp_factor * max_v_samp_factor pixels. + */ + h_out_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) / + cinfo->min_DCT_h_scaled_size; + v_out_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; + h_in_group = cinfo->max_h_samp_factor; + v_in_group = cinfo->max_v_samp_factor; + downsample->rowgroup_height[ci] = v_out_group; /* save for use later */ + if (h_in_group == h_out_group && v_in_group == v_out_group) { +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor) { + downsample->methods[ci] = fullsize_smooth_downsample; + downsample->pub.need_context_rows = TRUE; + } else +#endif + downsample->methods[ci] = fullsize_downsample; + } else if (h_in_group == h_out_group * 2 && + v_in_group == v_out_group) { + smoothok = FALSE; + downsample->methods[ci] = h2v1_downsample; + } else if (h_in_group == h_out_group * 2 && + v_in_group == v_out_group * 2) { +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor) { + downsample->methods[ci] = h2v2_smooth_downsample; + downsample->pub.need_context_rows = TRUE; + } else +#endif + downsample->methods[ci] = h2v2_downsample; + } else if ((h_in_group % h_out_group) == 0 && + (v_in_group % v_out_group) == 0) { + smoothok = FALSE; + downsample->methods[ci] = int_downsample; + downsample->h_expand[ci] = (UINT8) (h_in_group / h_out_group); + downsample->v_expand[ci] = (UINT8) (v_in_group / v_out_group); + } else + ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); + } + +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor && !smoothok) + TRACEMS(cinfo, 0, JTRC_SMOOTH_NOTIMPL); +#endif +} diff --git a/src/SDL2/external/jpeg-9/jctrans.c b/src/SDL2/external/jpeg-9/jctrans.c new file mode 100644 index 000000000..8813c3eac --- /dev/null +++ b/src/SDL2/external/jpeg-9/jctrans.c @@ -0,0 +1,385 @@ +/* + * jctrans.c + * + * Copyright (C) 1995-1998, Thomas G. Lane. + * Modified 2000-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains library routines for transcoding compression, + * that is, writing raw DCT coefficient arrays to an output JPEG file. + * The routines in jcapimin.c will also be needed by a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(void) transencode_master_selection + JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); +LOCAL(void) transencode_coef_controller + JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); + + +/* + * Compression initialization for writing raw-coefficient data. + * Before calling this, all parameters and a data destination must be set up. + * Call jpeg_finish_compress() to actually write the data. + * + * The number of passed virtual arrays must match cinfo->num_components. + * Note that the virtual arrays need not be filled or even realized at + * the time write_coefficients is called; indeed, if the virtual arrays + * were requested from this compression object's memory manager, they + * typically will be realized during this routine and filled afterwards. + */ + +GLOBAL(void) +jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Mark all tables to be written */ + jpeg_suppress_tables(cinfo, FALSE); + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Perform master selection of active modules */ + transencode_master_selection(cinfo, coef_arrays); + /* Wait for jpeg_finish_compress() call */ + cinfo->next_scanline = 0; /* so jpeg_write_marker works */ + cinfo->global_state = CSTATE_WRCOEFS; +} + + +/* + * Initialize the compression object with default parameters, + * then copy from the source object all parameters needed for lossless + * transcoding. Parameters that can be varied without loss (such as + * scan script and Huffman optimization) are left in their default states. + */ + +GLOBAL(void) +jpeg_copy_critical_parameters (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo) +{ + JQUANT_TBL ** qtblptr; + jpeg_component_info *incomp, *outcomp; + JQUANT_TBL *c_quant, *slot_quant; + int tblno, ci, coefi; + + /* Safety check to ensure start_compress not called yet. */ + if (dstinfo->global_state != CSTATE_START) + ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state); + /* Copy fundamental image dimensions */ + dstinfo->image_width = srcinfo->image_width; + dstinfo->image_height = srcinfo->image_height; + dstinfo->input_components = srcinfo->num_components; + dstinfo->in_color_space = srcinfo->jpeg_color_space; + dstinfo->jpeg_width = srcinfo->output_width; + dstinfo->jpeg_height = srcinfo->output_height; + dstinfo->min_DCT_h_scaled_size = srcinfo->min_DCT_h_scaled_size; + dstinfo->min_DCT_v_scaled_size = srcinfo->min_DCT_v_scaled_size; + /* Initialize all parameters to default values */ + jpeg_set_defaults(dstinfo); + /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB. + * Fix it to get the right header markers for the image colorspace. + * Note: Entropy table assignment in jpeg_set_colorspace depends + * on color_transform. + */ + dstinfo->color_transform = srcinfo->color_transform; + jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space); + dstinfo->data_precision = srcinfo->data_precision; + dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling; + /* Copy the source's quantization tables. */ + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + if (srcinfo->quant_tbl_ptrs[tblno] != NULL) { + qtblptr = & dstinfo->quant_tbl_ptrs[tblno]; + if (*qtblptr == NULL) + *qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo); + MEMCOPY((*qtblptr)->quantval, + srcinfo->quant_tbl_ptrs[tblno]->quantval, + SIZEOF((*qtblptr)->quantval)); + (*qtblptr)->sent_table = FALSE; + } + } + /* Copy the source's per-component info. + * Note we assume jpeg_set_defaults has allocated the dest comp_info array. + */ + dstinfo->num_components = srcinfo->num_components; + if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS) + ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components, + MAX_COMPONENTS); + for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info; + ci < dstinfo->num_components; ci++, incomp++, outcomp++) { + outcomp->component_id = incomp->component_id; + outcomp->h_samp_factor = incomp->h_samp_factor; + outcomp->v_samp_factor = incomp->v_samp_factor; + outcomp->quant_tbl_no = incomp->quant_tbl_no; + /* Make sure saved quantization table for component matches the qtable + * slot. If not, the input file re-used this qtable slot. + * IJG encoder currently cannot duplicate this. + */ + tblno = outcomp->quant_tbl_no; + if (tblno < 0 || tblno >= NUM_QUANT_TBLS || + srcinfo->quant_tbl_ptrs[tblno] == NULL) + ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno); + slot_quant = srcinfo->quant_tbl_ptrs[tblno]; + c_quant = incomp->quant_table; + if (c_quant != NULL) { + for (coefi = 0; coefi < DCTSIZE2; coefi++) { + if (c_quant->quantval[coefi] != slot_quant->quantval[coefi]) + ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno); + } + } + /* Note: we do not copy the source's entropy table assignments; + * instead we rely on jpeg_set_colorspace to have made a suitable choice. + */ + } + /* Also copy JFIF version and resolution information, if available. + * Strictly speaking this isn't "critical" info, but it's nearly + * always appropriate to copy it if available. In particular, + * if the application chooses to copy JFIF 1.02 extension markers from + * the source file, we need to copy the version to make sure we don't + * emit a file that has 1.02 extensions but a claimed version of 1.01. + * We will *not*, however, copy version info from mislabeled "2.01" files. + */ + if (srcinfo->saw_JFIF_marker) { + if (srcinfo->JFIF_major_version == 1) { + dstinfo->JFIF_major_version = srcinfo->JFIF_major_version; + dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version; + } + dstinfo->density_unit = srcinfo->density_unit; + dstinfo->X_density = srcinfo->X_density; + dstinfo->Y_density = srcinfo->Y_density; + } +} + + +/* + * Master selection of compression modules for transcoding. + * This substitutes for jcinit.c's initialization of the full compressor. + */ + +LOCAL(void) +transencode_master_selection (j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays) +{ + /* Initialize master control (includes parameter checking/processing) */ + jinit_c_master_control(cinfo, TRUE /* transcode only */); + + /* Entropy encoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_encoder(cinfo); + else { + jinit_huff_encoder(cinfo); + } + + /* We need a special coefficient buffer controller. */ + transencode_coef_controller(cinfo, coef_arrays); + + jinit_marker_writer(cinfo); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Write the datastream header (SOI, JFIF) immediately. + * Frame and scan headers are postponed till later. + * This lets application insert special markers after the SOI. + */ + (*cinfo->marker->write_file_header) (cinfo); +} + + +/* + * The rest of this file is a special implementation of the coefficient + * buffer controller. This is similar to jccoefct.c, but it handles only + * output from presupplied virtual arrays. Furthermore, we generate any + * dummy padding blocks on-the-fly rather than expecting them to be present + * in the arrays. + */ + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_coef_controller pub; /* public fields */ + + JDIMENSION iMCU_row_num; /* iMCU row # within image */ + JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* Virtual block array for each component. */ + jvirt_barray_ptr * whole_image; + + /* Workspace for constructing dummy blocks at right/bottom edges. */ + JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU]; +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + + +LOCAL(void) +start_iMCU_row (j_compress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->mcu_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + if (pass_mode != JBUF_CRANK_DEST) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + coef->iMCU_row_num = 0; + start_iMCU_row(cinfo); +} + + +/* + * Process some data. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the scan. + * The data is obtained from the virtual arrays and fed to the entropy coder. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf is ignored; it is likely to be a NULL pointer. + */ + +METHODDEF(boolean) +compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, ci, xindex, yindex, yoffset, blockcnt; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (coef->iMCU_row_num < last_iMCU_row || + yindex+yoffset < compptr->last_row_height) { + /* Fill in pointers to real blocks in this row */ + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < blockcnt; xindex++) + MCU_buffer[blkn++] = buffer_ptr++; + } else { + /* At bottom of image, need a whole row of dummy blocks */ + xindex = 0; + } + /* Fill in any dummy blocks needed in this row. + * Dummy blocks are filled in the same way as in jccoefct.c: + * all zeroes in the AC entries, DC entries equal to previous + * block's DC value. The init routine has already zeroed the + * AC entries, so we need only set the DC entries correctly. + */ + for (; xindex < compptr->MCU_width; xindex++) { + MCU_buffer[blkn] = coef->dummy_buffer[blkn]; + MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0]; + blkn++; + } + } + } + /* Try to write the MCU. */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + + +/* + * Initialize coefficient buffer controller. + * + * Each passed coefficient array must be the right size for that + * coefficient: width_in_blocks wide and height_in_blocks high, + * with unitheight at least v_samp_factor. + */ + +LOCAL(void) +transencode_coef_controller (j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays) +{ + my_coef_ptr coef; + JBLOCKROW buffer; + int i; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = &coef->pub; + coef->pub.start_pass = start_pass_coef; + coef->pub.compress_data = compress_output; + + /* Save pointer to virtual arrays */ + coef->whole_image = coef_arrays; + + /* Allocate and pre-zero space for dummy DCT blocks. */ + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + FMEMZERO((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { + coef->dummy_buffer[i] = buffer + i; + } +} diff --git a/src/SDL2/external/jpeg-9/jdapimin.c b/src/SDL2/external/jpeg-9/jdapimin.c new file mode 100644 index 000000000..7f1ce4c05 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdapimin.c @@ -0,0 +1,396 @@ +/* + * jdapimin.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the decompression half + * of the JPEG library. These are the "minimum" API routines that may be + * needed in either the normal full-decompression case or the + * transcoding-only case. + * + * Most of the routines intended to be called directly by an application + * are in this file or in jdapistd.c. But also see jcomapi.c for routines + * shared by compression and decompression, and jdtrans.c for the transcoding + * case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Initialization of a JPEG decompression object. + * The error manager must already be set up (in case memory manager fails). + */ + +GLOBAL(void) +jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize) +{ + int i; + + /* Guard against version mismatches between library and caller. */ + cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ + if (version != JPEG_LIB_VERSION) + ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); + if (structsize != SIZEOF(struct jpeg_decompress_struct)) + ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, + (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize); + + /* For debugging purposes, we zero the whole master structure. + * But the application has already set the err pointer, and may have set + * client_data, so we have to save and restore those fields. + * Note: if application hasn't set client_data, tools like Purify may + * complain here. + */ + { + struct jpeg_error_mgr * err = cinfo->err; + void * client_data = cinfo->client_data; /* ignore Purify complaint here */ + MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct)); + cinfo->err = err; + cinfo->client_data = client_data; + } + cinfo->is_decompressor = TRUE; + + /* Initialize a memory manager instance for this object */ + jinit_memory_mgr((j_common_ptr) cinfo); + + /* Zero out pointers to permanent structures. */ + cinfo->progress = NULL; + cinfo->src = NULL; + + for (i = 0; i < NUM_QUANT_TBLS; i++) + cinfo->quant_tbl_ptrs[i] = NULL; + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + cinfo->dc_huff_tbl_ptrs[i] = NULL; + cinfo->ac_huff_tbl_ptrs[i] = NULL; + } + + /* Initialize marker processor so application can override methods + * for COM, APPn markers before calling jpeg_read_header. + */ + cinfo->marker_list = NULL; + jinit_marker_reader(cinfo); + + /* And initialize the overall input controller. */ + jinit_input_controller(cinfo); + + /* OK, I'm ready */ + cinfo->global_state = DSTATE_START; +} + + +/* + * Destruction of a JPEG decompression object + */ + +GLOBAL(void) +jpeg_destroy_decompress (j_decompress_ptr cinfo) +{ + jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Abort processing of a JPEG decompression operation, + * but don't destroy the object itself. + */ + +GLOBAL(void) +jpeg_abort_decompress (j_decompress_ptr cinfo) +{ + jpeg_abort((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Set default decompression parameters. + */ + +LOCAL(void) +default_decompress_parms (j_decompress_ptr cinfo) +{ + /* Guess the input colorspace, and set output colorspace accordingly. */ + /* (Wish JPEG committee had provided a real way to specify this...) */ + /* Note application may override our guesses. */ + switch (cinfo->num_components) { + case 1: + cinfo->jpeg_color_space = JCS_GRAYSCALE; + cinfo->out_color_space = JCS_GRAYSCALE; + break; + + case 3: + if (cinfo->saw_JFIF_marker) { + cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */ + } else if (cinfo->saw_Adobe_marker) { + switch (cinfo->Adobe_transform) { + case 0: + cinfo->jpeg_color_space = JCS_RGB; + break; + case 1: + cinfo->jpeg_color_space = JCS_YCbCr; + break; + default: + WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + break; + } + } else { + /* Saw no special markers, try to guess from the component IDs */ + int cid0 = cinfo->comp_info[0].component_id; + int cid1 = cinfo->comp_info[1].component_id; + int cid2 = cinfo->comp_info[2].component_id; + + if (cid0 == 1 && cid1 == 2 && cid2 == 3) + cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */ + else if (cid0 == 82 && cid1 == 71 && cid2 == 66) + cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */ + else { + TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2); + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + } + } + /* Always guess RGB is proper output colorspace. */ + cinfo->out_color_space = JCS_RGB; + break; + + case 4: + if (cinfo->saw_Adobe_marker) { + switch (cinfo->Adobe_transform) { + case 0: + cinfo->jpeg_color_space = JCS_CMYK; + break; + case 2: + cinfo->jpeg_color_space = JCS_YCCK; + break; + default: + WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); + cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */ + break; + } + } else { + /* No special markers, assume straight CMYK. */ + cinfo->jpeg_color_space = JCS_CMYK; + } + cinfo->out_color_space = JCS_CMYK; + break; + + default: + cinfo->jpeg_color_space = JCS_UNKNOWN; + cinfo->out_color_space = JCS_UNKNOWN; + break; + } + + /* Set defaults for other decompression parameters. */ + cinfo->scale_num = cinfo->block_size; /* 1:1 scaling */ + cinfo->scale_denom = cinfo->block_size; + cinfo->output_gamma = 1.0; + cinfo->buffered_image = FALSE; + cinfo->raw_data_out = FALSE; + cinfo->dct_method = JDCT_DEFAULT; + cinfo->do_fancy_upsampling = TRUE; + cinfo->do_block_smoothing = TRUE; + cinfo->quantize_colors = FALSE; + /* We set these in case application only sets quantize_colors. */ + cinfo->dither_mode = JDITHER_FS; +#ifdef QUANT_2PASS_SUPPORTED + cinfo->two_pass_quantize = TRUE; +#else + cinfo->two_pass_quantize = FALSE; +#endif + cinfo->desired_number_of_colors = 256; + cinfo->colormap = NULL; + /* Initialize for no mode change in buffered-image mode. */ + cinfo->enable_1pass_quant = FALSE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; +} + + +/* + * Decompression startup: read start of JPEG datastream to see what's there. + * Need only initialize JPEG object and supply a data source before calling. + * + * This routine will read as far as the first SOS marker (ie, actual start of + * compressed data), and will save all tables and parameters in the JPEG + * object. It will also initialize the decompression parameters to default + * values, and finally return JPEG_HEADER_OK. On return, the application may + * adjust the decompression parameters and then call jpeg_start_decompress. + * (Or, if the application only wanted to determine the image parameters, + * the data need not be decompressed. In that case, call jpeg_abort or + * jpeg_destroy to release any temporary space.) + * If an abbreviated (tables only) datastream is presented, the routine will + * return JPEG_HEADER_TABLES_ONLY upon reaching EOI. The application may then + * re-use the JPEG object to read the abbreviated image datastream(s). + * It is unnecessary (but OK) to call jpeg_abort in this case. + * The JPEG_SUSPENDED return code only occurs if the data source module + * requests suspension of the decompressor. In this case the application + * should load more source data and then re-call jpeg_read_header to resume + * processing. + * If a non-suspending data source is used and require_image is TRUE, then the + * return code need not be inspected since only JPEG_HEADER_OK is possible. + * + * This routine is now just a front end to jpeg_consume_input, with some + * extra error checking. + */ + +GLOBAL(int) +jpeg_read_header (j_decompress_ptr cinfo, boolean require_image) +{ + int retcode; + + if (cinfo->global_state != DSTATE_START && + cinfo->global_state != DSTATE_INHEADER) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + retcode = jpeg_consume_input(cinfo); + + switch (retcode) { + case JPEG_REACHED_SOS: + retcode = JPEG_HEADER_OK; + break; + case JPEG_REACHED_EOI: + if (require_image) /* Complain if application wanted an image */ + ERREXIT(cinfo, JERR_NO_IMAGE); + /* Reset to start state; it would be safer to require the application to + * call jpeg_abort, but we can't change it now for compatibility reasons. + * A side effect is to free any temporary memory (there shouldn't be any). + */ + jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */ + retcode = JPEG_HEADER_TABLES_ONLY; + break; + case JPEG_SUSPENDED: + /* no work */ + break; + } + + return retcode; +} + + +/* + * Consume data in advance of what the decompressor requires. + * This can be called at any time once the decompressor object has + * been created and a data source has been set up. + * + * This routine is essentially a state machine that handles a couple + * of critical state-transition actions, namely initial setup and + * transition from header scanning to ready-for-start_decompress. + * All the actual input is done via the input controller's consume_input + * method. + */ + +GLOBAL(int) +jpeg_consume_input (j_decompress_ptr cinfo) +{ + int retcode = JPEG_SUSPENDED; + + /* NB: every possible DSTATE value should be listed in this switch */ + switch (cinfo->global_state) { + case DSTATE_START: + /* Start-of-datastream actions: reset appropriate modules */ + (*cinfo->inputctl->reset_input_controller) (cinfo); + /* Initialize application's data source module */ + (*cinfo->src->init_source) (cinfo); + cinfo->global_state = DSTATE_INHEADER; + /*FALLTHROUGH*/ + case DSTATE_INHEADER: + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */ + /* Set up default parameters based on header data */ + default_decompress_parms(cinfo); + /* Set global state: ready for start_decompress */ + cinfo->global_state = DSTATE_READY; + } + break; + case DSTATE_READY: + /* Can't advance past first SOS until start_decompress is called */ + retcode = JPEG_REACHED_SOS; + break; + case DSTATE_PRELOAD: + case DSTATE_PRESCAN: + case DSTATE_SCANNING: + case DSTATE_RAW_OK: + case DSTATE_BUFIMAGE: + case DSTATE_BUFPOST: + case DSTATE_STOPPING: + retcode = (*cinfo->inputctl->consume_input) (cinfo); + break; + default: + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + return retcode; +} + + +/* + * Have we finished reading the input file? + */ + +GLOBAL(boolean) +jpeg_input_complete (j_decompress_ptr cinfo) +{ + /* Check for valid jpeg object */ + if (cinfo->global_state < DSTATE_START || + cinfo->global_state > DSTATE_STOPPING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return cinfo->inputctl->eoi_reached; +} + + +/* + * Is there more than one scan? + */ + +GLOBAL(boolean) +jpeg_has_multiple_scans (j_decompress_ptr cinfo) +{ + /* Only valid after jpeg_read_header completes */ + if (cinfo->global_state < DSTATE_READY || + cinfo->global_state > DSTATE_STOPPING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return cinfo->inputctl->has_multiple_scans; +} + + +/* + * Finish JPEG decompression. + * + * This will normally just verify the file trailer and release temp storage. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_finish_decompress (j_decompress_ptr cinfo) +{ + if ((cinfo->global_state == DSTATE_SCANNING || + cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) { + /* Terminate final pass of non-buffered mode */ + if (cinfo->output_scanline < cinfo->output_height) + ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); + (*cinfo->master->finish_output_pass) (cinfo); + cinfo->global_state = DSTATE_STOPPING; + } else if (cinfo->global_state == DSTATE_BUFIMAGE) { + /* Finishing after a buffered-image operation */ + cinfo->global_state = DSTATE_STOPPING; + } else if (cinfo->global_state != DSTATE_STOPPING) { + /* STOPPING = repeat call after a suspension, anything else is error */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + /* Read until EOI */ + while (! cinfo->inputctl->eoi_reached) { + if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) + return FALSE; /* Suspend, come back later */ + } + /* Do final cleanup */ + (*cinfo->src->term_source) (cinfo); + /* We can use jpeg_abort to release memory and reset global_state */ + jpeg_abort((j_common_ptr) cinfo); + return TRUE; +} diff --git a/src/SDL2/external/jpeg-9/jdapistd.c b/src/SDL2/external/jpeg-9/jdapistd.c new file mode 100644 index 000000000..9d7453777 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdapistd.c @@ -0,0 +1,275 @@ +/* + * jdapistd.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the decompression half + * of the JPEG library. These are the "standard" API routines that are + * used in the normal full-decompression case. They are not used by a + * transcoding-only application. Note that if an application links in + * jpeg_start_decompress, it will end up linking in the entire decompressor. + * We thus must separate this file from jdapimin.c to avoid linking the + * whole decompression library into a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo)); + + +/* + * Decompression initialization. + * jpeg_read_header must be completed before calling this. + * + * If a multipass operating mode was selected, this will do all but the + * last pass, and thus may take a great deal of time. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_start_decompress (j_decompress_ptr cinfo) +{ + if (cinfo->global_state == DSTATE_READY) { + /* First call: initialize master control, select active modules */ + jinit_master_decompress(cinfo); + if (cinfo->buffered_image) { + /* No more work here; expecting jpeg_start_output next */ + cinfo->global_state = DSTATE_BUFIMAGE; + return TRUE; + } + cinfo->global_state = DSTATE_PRELOAD; + } + if (cinfo->global_state == DSTATE_PRELOAD) { + /* If file has multiple scans, absorb them all into the coef buffer */ + if (cinfo->inputctl->has_multiple_scans) { +#ifdef D_MULTISCAN_FILES_SUPPORTED + for (;;) { + int retcode; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + /* Absorb some more input */ + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_SUSPENDED) + return FALSE; + if (retcode == JPEG_REACHED_EOI) + break; + /* Advance progress counter if appropriate */ + if (cinfo->progress != NULL && + (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { + if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { + /* jdmaster underestimated number of scans; ratchet up one scan */ + cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; + } + } + } +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + } + cinfo->output_scan_number = cinfo->input_scan_number; + } else if (cinfo->global_state != DSTATE_PRESCAN) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Perform any dummy output passes, and set up for the final pass */ + return output_pass_setup(cinfo); +} + + +/* + * Set up for an output pass, and perform any dummy pass(es) needed. + * Common subroutine for jpeg_start_decompress and jpeg_start_output. + * Entry: global_state = DSTATE_PRESCAN only if previously suspended. + * Exit: If done, returns TRUE and sets global_state for proper output mode. + * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN. + */ + +LOCAL(boolean) +output_pass_setup (j_decompress_ptr cinfo) +{ + if (cinfo->global_state != DSTATE_PRESCAN) { + /* First call: do pass setup */ + (*cinfo->master->prepare_for_output_pass) (cinfo); + cinfo->output_scanline = 0; + cinfo->global_state = DSTATE_PRESCAN; + } + /* Loop over any required dummy passes */ + while (cinfo->master->is_dummy_pass) { +#ifdef QUANT_2PASS_SUPPORTED + /* Crank through the dummy pass */ + while (cinfo->output_scanline < cinfo->output_height) { + JDIMENSION last_scanline; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + /* Process some data */ + last_scanline = cinfo->output_scanline; + (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL, + &cinfo->output_scanline, (JDIMENSION) 0); + if (cinfo->output_scanline == last_scanline) + return FALSE; /* No progress made, must suspend */ + } + /* Finish up dummy pass, and set up for another one */ + (*cinfo->master->finish_output_pass) (cinfo); + (*cinfo->master->prepare_for_output_pass) (cinfo); + cinfo->output_scanline = 0; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* QUANT_2PASS_SUPPORTED */ + } + /* Ready for application to drive output pass through + * jpeg_read_scanlines or jpeg_read_raw_data. + */ + cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING; + return TRUE; +} + + +/* + * Read some scanlines of data from the JPEG decompressor. + * + * The return value will be the number of lines actually read. + * This may be less than the number requested in several cases, + * including bottom of image, data source suspension, and operating + * modes that emit multiple scanlines at a time. + * + * Note: we warn about excess calls to jpeg_read_scanlines() since + * this likely signals an application programmer error. However, + * an oversize buffer (max_lines > scanlines remaining) is not an error. + */ + +GLOBAL(JDIMENSION) +jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines, + JDIMENSION max_lines) +{ + JDIMENSION row_ctr; + + if (cinfo->global_state != DSTATE_SCANNING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->output_scanline >= cinfo->output_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Process some data */ + row_ctr = 0; + (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines); + cinfo->output_scanline += row_ctr; + return row_ctr; +} + + +/* + * Alternate entry point to read raw data. + * Processes exactly one iMCU row per call, unless suspended. + */ + +GLOBAL(JDIMENSION) +jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data, + JDIMENSION max_lines) +{ + JDIMENSION lines_per_iMCU_row; + + if (cinfo->global_state != DSTATE_RAW_OK) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->output_scanline >= cinfo->output_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Verify that at least one iMCU row can be returned. */ + lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size; + if (max_lines < lines_per_iMCU_row) + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* Decompress directly into user's buffer. */ + if (! (*cinfo->coef->decompress_data) (cinfo, data)) + return 0; /* suspension forced, can do nothing more */ + + /* OK, we processed one iMCU row. */ + cinfo->output_scanline += lines_per_iMCU_row; + return lines_per_iMCU_row; +} + + +/* Additional entry points for buffered-image mode. */ + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Initialize for an output pass in buffered-image mode. + */ + +GLOBAL(boolean) +jpeg_start_output (j_decompress_ptr cinfo, int scan_number) +{ + if (cinfo->global_state != DSTATE_BUFIMAGE && + cinfo->global_state != DSTATE_PRESCAN) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Limit scan number to valid range */ + if (scan_number <= 0) + scan_number = 1; + if (cinfo->inputctl->eoi_reached && + scan_number > cinfo->input_scan_number) + scan_number = cinfo->input_scan_number; + cinfo->output_scan_number = scan_number; + /* Perform any dummy output passes, and set up for the real pass */ + return output_pass_setup(cinfo); +} + + +/* + * Finish up after an output pass in buffered-image mode. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_finish_output (j_decompress_ptr cinfo) +{ + if ((cinfo->global_state == DSTATE_SCANNING || + cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) { + /* Terminate this pass. */ + /* We do not require the whole pass to have been completed. */ + (*cinfo->master->finish_output_pass) (cinfo); + cinfo->global_state = DSTATE_BUFPOST; + } else if (cinfo->global_state != DSTATE_BUFPOST) { + /* BUFPOST = repeat call after a suspension, anything else is error */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + /* Read markers looking for SOS or EOI */ + while (cinfo->input_scan_number <= cinfo->output_scan_number && + ! cinfo->inputctl->eoi_reached) { + if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) + return FALSE; /* Suspend, come back later */ + } + cinfo->global_state = DSTATE_BUFIMAGE; + return TRUE; +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/jdarith.c b/src/SDL2/external/jpeg-9/jdarith.c new file mode 100644 index 000000000..6e32d230c --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdarith.c @@ -0,0 +1,782 @@ +/* + * jdarith.c + * + * Developed 1997-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains portable arithmetic entropy decoding routines for JPEG + * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81). + * + * Both sequential and progressive modes are supported in this single module. + * + * Suspension is not currently supported in this module. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Expanded entropy decoder object for arithmetic decoding. */ + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + INT32 c; /* C register, base of coding interval + input bit buffer */ + INT32 a; /* A register, normalized size of coding interval */ + int ct; /* bit shift counter, # of bits left in bit buffer part of C */ + /* init: ct = -16 */ + /* run: ct = 0..7 */ + /* error: ct = -1 */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ + int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */ + + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Pointers to statistics areas (these workspaces have image lifespan) */ + unsigned char * dc_stats[NUM_ARITH_TBLS]; + unsigned char * ac_stats[NUM_ARITH_TBLS]; + + /* Statistics bin for coding with fixed probability 0.5 */ + unsigned char fixed_bin[4]; +} arith_entropy_decoder; + +typedef arith_entropy_decoder * arith_entropy_ptr; + +/* The following two definitions specify the allocation chunk size + * for the statistics area. + * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least + * 49 statistics bins for DC, and 245 statistics bins for AC coding. + * + * We use a compact representation with 1 byte per statistics bin, + * thus the numbers directly represent byte sizes. + * This 1 byte per statistics bin contains the meaning of the MPS + * (more probable symbol) in the highest bit (mask 0x80), and the + * index into the probability estimation state machine table + * in the lower bits (mask 0x7F). + */ + +#define DC_STAT_BINS 64 +#define AC_STAT_BINS 256 + + +LOCAL(int) +get_byte (j_decompress_ptr cinfo) +/* Read next input byte; we do not support suspension in this module. */ +{ + struct jpeg_source_mgr * src = cinfo->src; + + if (src->bytes_in_buffer == 0) + if (! (*src->fill_input_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + src->bytes_in_buffer--; + return GETJOCTET(*src->next_input_byte++); +} + + +/* + * The core arithmetic decoding routine (common in JPEG and JBIG). + * This needs to go as fast as possible. + * Machine-dependent optimization facilities + * are not utilized in this portable implementation. + * However, this code should be fairly efficient and + * may be a good base for further optimizations anyway. + * + * Return value is 0 or 1 (binary decision). + * + * Note: I've changed the handling of the code base & bit + * buffer register C compared to other implementations + * based on the standards layout & procedures. + * While it also contains both the actual base of the + * coding interval (16 bits) and the next-bits buffer, + * the cut-point between these two parts is floating + * (instead of fixed) with the bit shift counter CT. + * Thus, we also need only one (variable instead of + * fixed size) shift for the LPS/MPS decision, and + * we can get away with any renormalization update + * of C (except for new data insertion, of course). + * + * I've also introduced a new scheme for accessing + * the probability estimation state machine table, + * derived from Markus Kuhn's JBIG implementation. + */ + +LOCAL(int) +arith_decode (j_decompress_ptr cinfo, unsigned char *st) +{ + register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + register unsigned char nl, nm; + register INT32 qe, temp; + register int sv, data; + + /* Renormalization & data input per section D.2.6 */ + while (e->a < 0x8000L) { + if (--e->ct < 0) { + /* Need to fetch next data byte */ + if (cinfo->unread_marker) + data = 0; /* stuff zero data */ + else { + data = get_byte(cinfo); /* read next input byte */ + if (data == 0xFF) { /* zero stuff or marker code */ + do data = get_byte(cinfo); + while (data == 0xFF); /* swallow extra 0xFF bytes */ + if (data == 0) + data = 0xFF; /* discard stuffed zero byte */ + else { + /* Note: Different from the Huffman decoder, hitting + * a marker while processing the compressed data + * segment is legal in arithmetic coding. + * The convention is to supply zero data + * then until decoding is complete. + */ + cinfo->unread_marker = data; + data = 0; + } + } + } + e->c = (e->c << 8) | data; /* insert data into C register */ + if ((e->ct += 8) < 0) /* update bit shift counter */ + /* Need more initial bytes */ + if (++e->ct == 0) + /* Got 2 initial bytes -> re-init A and exit loop */ + e->a = 0x8000L; /* => e->a = 0x10000L after loop exit */ + } + e->a <<= 1; + } + + /* Fetch values from our compact representation of Table D.3(D.2): + * Qe values and probability estimation state machine + */ + sv = *st; + qe = jpeg_aritab[sv & 0x7F]; /* => Qe_Value */ + nl = qe & 0xFF; qe >>= 8; /* Next_Index_LPS + Switch_MPS */ + nm = qe & 0xFF; qe >>= 8; /* Next_Index_MPS */ + + /* Decode & estimation procedures per sections D.2.4 & D.2.5 */ + temp = e->a - qe; + e->a = temp; + temp <<= e->ct; + if (e->c >= temp) { + e->c -= temp; + /* Conditional LPS (less probable symbol) exchange */ + if (e->a < qe) { + e->a = qe; + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } else { + e->a = qe; + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + sv ^= 0x80; /* Exchange LPS/MPS */ + } + } else if (e->a < 0x8000L) { + /* Conditional MPS (more probable symbol) exchange */ + if (e->a < qe) { + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + sv ^= 0x80; /* Exchange LPS/MPS */ + } else { + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } + } + + return sv >> 7; +} + + +/* + * Check for a restart marker & resynchronize decoder. + */ + +LOCAL(void) +process_restart (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci; + jpeg_component_info * compptr; + + /* Advance past the RSTn marker */ + if (! (*cinfo->marker->read_restart_marker) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + + /* Re-initialize statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) { + MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS); + /* Reset DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + if ((! cinfo->progressive_mode && cinfo->lim_Se) || + (cinfo->progressive_mode && cinfo->Ss)) { + MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS); + } + } + + /* Reset arithmetic decoding variables */ + entropy->c = 0; + entropy->a = 0; + entropy->ct = -16; /* force reading 2 initial bytes to fill C */ + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Arithmetic MCU decoding. + * Each of these routines decodes and returns one MCU's worth of + * arithmetic-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. + */ + +/* + * MCU decoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl, sign; + int v, m; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; + + /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */ + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.19: Decode_DC_DIFF */ + if (arith_decode(cinfo, st) == 0) + entropy->dc_context[ci] = 0; + else { + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, st + 1); + st += 2; st += sign; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */ + else + entropy->dc_context[ci] = 4 + (sign * 4); /* small diff category */ + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + entropy->last_dc_val[ci] += v; + } + + /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */ + (*block)[0] = (JCOEF) (entropy->last_dc_val[ci] << cinfo->Al); + } + + return TRUE; +} + + +/* + * MCU decoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int tbl, sign, k; + int v, m; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */ + + /* Figure F.20: Decode_AC_coefficients */ + k = cinfo->Ss - 1; + do { + st = entropy->ac_stats[tbl] + 3 * k; + if (arith_decode(cinfo, st)) break; /* EOB flag */ + for (;;) { + k++; + if (arith_decode(cinfo, st + 1)) break; + st += 3; + if (k >= cinfo->Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, entropy->fixed_bin); + st += 2; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + if (arith_decode(cinfo, st)) { + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + } + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + /* Scale and output coefficient in natural (dezigzagged) order */ + (*block)[natural_order[k]] = (JCOEF) (v << cinfo->Al); + } while (k < cinfo->Se); + + return TRUE; +} + + +/* + * MCU decoding for DC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + unsigned char *st; + int p1, blkn; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + st = entropy->fixed_bin; /* use fixed probability estimation */ + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* Encoded data is simply the next bit of the two's-complement DC value */ + if (arith_decode(cinfo, st)) + MCU_data[blkn][0][0] |= p1; + } + + return TRUE; +} + + +/* + * MCU decoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + JCOEFPTR thiscoef; + unsigned char *st; + int tbl, k, kex; + int p1, m1; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ + + /* Establish EOBx (previous stage end-of-block) index */ + kex = cinfo->Se; + do { + if ((*block)[natural_order[kex]]) break; + } while (--kex); + + k = cinfo->Ss - 1; + do { + st = entropy->ac_stats[tbl] + 3 * k; + if (k >= kex) + if (arith_decode(cinfo, st)) break; /* EOB flag */ + for (;;) { + thiscoef = *block + natural_order[++k]; + if (*thiscoef) { /* previously nonzero coef */ + if (arith_decode(cinfo, st + 2)) { + if (*thiscoef < 0) + *thiscoef += m1; + else + *thiscoef += p1; + } + break; + } + if (arith_decode(cinfo, st + 1)) { /* newly nonzero coef */ + if (arith_decode(cinfo, entropy->fixed_bin)) + *thiscoef = m1; + else + *thiscoef = p1; + break; + } + st += 3; + if (k >= cinfo->Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + } while (k < cinfo->Se); + + return TRUE; +} + + +/* + * Decode one MCU's worth of arithmetic-compressed coefficients. + */ + +METHODDEF(boolean) +decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + jpeg_component_info * compptr; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl, sign, k; + int v, m; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + + /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */ + + tbl = compptr->dc_tbl_no; + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.19: Decode_DC_DIFF */ + if (arith_decode(cinfo, st) == 0) + entropy->dc_context[ci] = 0; + else { + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, st + 1); + st += 2; st += sign; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */ + else + entropy->dc_context[ci] = 4 + (sign * 4); /* small diff category */ + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + entropy->last_dc_val[ci] += v; + } + + (*block)[0] = (JCOEF) entropy->last_dc_val[ci]; + + /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */ + + if (cinfo->lim_Se == 0) continue; + tbl = compptr->ac_tbl_no; + k = 0; + + /* Figure F.20: Decode_AC_coefficients */ + do { + st = entropy->ac_stats[tbl] + 3 * k; + if (arith_decode(cinfo, st)) break; /* EOB flag */ + for (;;) { + k++; + if (arith_decode(cinfo, st + 1)) break; + st += 3; + if (k >= cinfo->lim_Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, entropy->fixed_bin); + st += 2; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + if (arith_decode(cinfo, st)) { + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + } + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + (*block)[natural_order[k]] = (JCOEF) v; + } while (k < cinfo->lim_Se); + } + + return TRUE; +} + + +/* + * Initialize for an arithmetic-compressed scan. + */ + +METHODDEF(void) +start_pass (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (cinfo->progressive_mode) { + /* Validate progressive scan parameters */ + if (cinfo->Ss == 0) { + if (cinfo->Se != 0) + goto bad; + } else { + /* need not check Ss/Se < 0 since they came from unsigned bytes */ + if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se) + goto bad; + /* AC scans may have only one component */ + if (cinfo->comps_in_scan != 1) + goto bad; + } + if (cinfo->Ah != 0) { + /* Successive approximation refinement scan: must have Al = Ah-1. */ + if (cinfo->Ah-1 != cinfo->Al) + goto bad; + } + if (cinfo->Al > 13) { /* need not check for < 0 */ + bad: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + } + /* Update progression status, and verify that scan order is legal. + * Note that inter-scan inconsistencies are treated as warnings + * not fatal errors ... not clear if this is right way to behave. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + int coefi, cindex = cinfo->cur_comp_info[ci]->component_index; + int *coef_bit_ptr = & cinfo->coef_bits[cindex][0]; + if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); + for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { + int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; + if (cinfo->Ah != expected) + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); + coef_bit_ptr[coefi] = cinfo->Al; + } + } + /* Select MCU decoding routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_first; + else + entropy->pub.decode_mcu = decode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_refine; + else + entropy->pub.decode_mcu = decode_mcu_AC_refine; + } + } else { + /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. + * This ought to be an error condition, but we make it a warning. + */ + if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 || + (cinfo->Se < DCTSIZE2 && cinfo->Se != cinfo->lim_Se)) + WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); + /* Select MCU decoding routine */ + entropy->pub.decode_mcu = decode_mcu; + } + + /* Allocate & initialize requested statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) { + tbl = compptr->dc_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->dc_stats[tbl] == NULL) + entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS); + MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS); + /* Initialize DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + if ((! cinfo->progressive_mode && cinfo->lim_Se) || + (cinfo->progressive_mode && cinfo->Ss)) { + tbl = compptr->ac_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->ac_stats[tbl] == NULL) + entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS); + MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS); + } + } + + /* Initialize arithmetic decoding variables */ + entropy->c = 0; + entropy->a = 0; + entropy->ct = -16; /* force reading 2 initial bytes to fill C */ + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Module initialization routine for arithmetic entropy decoding. + */ + +GLOBAL(void) +jinit_arith_decoder (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy; + int i; + + entropy = (arith_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(arith_entropy_decoder)); + cinfo->entropy = &entropy->pub; + entropy->pub.start_pass = start_pass; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + entropy->dc_stats[i] = NULL; + entropy->ac_stats[i] = NULL; + } + + /* Initialize index for fixed probability estimation */ + entropy->fixed_bin[0] = 113; + + if (cinfo->progressive_mode) { + /* Create progression status table */ + int *coef_bit_ptr, ci; + cinfo->coef_bits = (int (*)[DCTSIZE2]) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components*DCTSIZE2*SIZEOF(int)); + coef_bit_ptr = & cinfo->coef_bits[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (i = 0; i < DCTSIZE2; i++) + *coef_bit_ptr++ = -1; + } +} diff --git a/src/SDL2/external/jpeg-9/jdatadst.c b/src/SDL2/external/jpeg-9/jdatadst.c new file mode 100644 index 000000000..5c8681c9e --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdatadst.c @@ -0,0 +1,270 @@ +/* + * jdatadst.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2009-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains compression data destination routines for the case of + * emitting JPEG data to memory or to a file (or any stdio stream). + * While these routines are sufficient for most applications, + * some will want to use a different destination manager. + * IMPORTANT: we assume that fwrite() will correctly transcribe an array of + * JOCTETs into 8-bit-wide elements on external storage. If char is wider + * than 8 bits on your machine, you may need to do some tweaking. + */ + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + + +/* Expanded data destination object for stdio output */ + +typedef struct { + struct jpeg_destination_mgr pub; /* public fields */ + + FILE * outfile; /* target stream */ + JOCTET * buffer; /* start of buffer */ +} my_destination_mgr; + +typedef my_destination_mgr * my_dest_ptr; + +#define OUTPUT_BUF_SIZE 4096 /* choose an efficiently fwrite'able size */ + + +/* Expanded data destination object for memory output */ + +typedef struct { + struct jpeg_destination_mgr pub; /* public fields */ + + unsigned char ** outbuffer; /* target buffer */ + unsigned long * outsize; + unsigned char * newbuffer; /* newly allocated buffer */ + JOCTET * buffer; /* start of buffer */ + size_t bufsize; +} my_mem_destination_mgr; + +typedef my_mem_destination_mgr * my_mem_dest_ptr; + + +/* + * Initialize destination --- called by jpeg_start_compress + * before any data is actually written. + */ + +METHODDEF(void) +init_destination (j_compress_ptr cinfo) +{ + my_dest_ptr dest = (my_dest_ptr) cinfo->dest; + + /* Allocate the output buffer --- it will be released when done with image */ + dest->buffer = (JOCTET *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + OUTPUT_BUF_SIZE * SIZEOF(JOCTET)); + + dest->pub.next_output_byte = dest->buffer; + dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; +} + +METHODDEF(void) +init_mem_destination (j_compress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Empty the output buffer --- called whenever buffer fills up. + * + * In typical applications, this should write the entire output buffer + * (ignoring the current state of next_output_byte & free_in_buffer), + * reset the pointer & count to the start of the buffer, and return TRUE + * indicating that the buffer has been dumped. + * + * In applications that need to be able to suspend compression due to output + * overrun, a FALSE return indicates that the buffer cannot be emptied now. + * In this situation, the compressor will return to its caller (possibly with + * an indication that it has not accepted all the supplied scanlines). The + * application should resume compression after it has made more room in the + * output buffer. Note that there are substantial restrictions on the use of + * suspension --- see the documentation. + * + * When suspending, the compressor will back up to a convenient restart point + * (typically the start of the current MCU). next_output_byte & free_in_buffer + * indicate where the restart point will be if the current call returns FALSE. + * Data beyond this point will be regenerated after resumption, so do not + * write it out when emptying the buffer externally. + */ + +METHODDEF(boolean) +empty_output_buffer (j_compress_ptr cinfo) +{ + my_dest_ptr dest = (my_dest_ptr) cinfo->dest; + + if (JFWRITE(dest->outfile, dest->buffer, OUTPUT_BUF_SIZE) != + (size_t) OUTPUT_BUF_SIZE) + ERREXIT(cinfo, JERR_FILE_WRITE); + + dest->pub.next_output_byte = dest->buffer; + dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; + + return TRUE; +} + +METHODDEF(boolean) +empty_mem_output_buffer (j_compress_ptr cinfo) +{ + size_t nextsize; + JOCTET * nextbuffer; + my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest; + + /* Try to allocate new buffer with double size */ + nextsize = dest->bufsize * 2; + nextbuffer = (JOCTET *) malloc(nextsize); + + if (nextbuffer == NULL) + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10); + + MEMCOPY(nextbuffer, dest->buffer, dest->bufsize); + + if (dest->newbuffer != NULL) + free(dest->newbuffer); + + dest->newbuffer = nextbuffer; + + dest->pub.next_output_byte = nextbuffer + dest->bufsize; + dest->pub.free_in_buffer = dest->bufsize; + + dest->buffer = nextbuffer; + dest->bufsize = nextsize; + + return TRUE; +} + + +/* + * Terminate destination --- called by jpeg_finish_compress + * after all data has been written. Usually needs to flush buffer. + * + * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding + * application must deal with any cleanup that should happen even + * for error exit. + */ + +METHODDEF(void) +term_destination (j_compress_ptr cinfo) +{ + my_dest_ptr dest = (my_dest_ptr) cinfo->dest; + size_t datacount = OUTPUT_BUF_SIZE - dest->pub.free_in_buffer; + + /* Write any data remaining in the buffer */ + if (datacount > 0) { + if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount) + ERREXIT(cinfo, JERR_FILE_WRITE); + } + fflush(dest->outfile); + /* Make sure we wrote the output file OK */ + if (ferror(dest->outfile)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + +METHODDEF(void) +term_mem_destination (j_compress_ptr cinfo) +{ + my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest; + + *dest->outbuffer = dest->buffer; + *dest->outsize = dest->bufsize - dest->pub.free_in_buffer; +} + + +/* + * Prepare for output to a stdio stream. + * The caller must have already opened the stream, and is responsible + * for closing it after finishing compression. + */ + +GLOBAL(void) +jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile) +{ + my_dest_ptr dest; + + /* The destination object is made permanent so that multiple JPEG images + * can be written to the same file without re-executing jpeg_stdio_dest. + * This makes it dangerous to use this manager and a different destination + * manager serially with the same JPEG object, because their private object + * sizes may be different. Caveat programmer. + */ + if (cinfo->dest == NULL) { /* first time for this JPEG object? */ + cinfo->dest = (struct jpeg_destination_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_destination_mgr)); + } + + dest = (my_dest_ptr) cinfo->dest; + dest->pub.init_destination = init_destination; + dest->pub.empty_output_buffer = empty_output_buffer; + dest->pub.term_destination = term_destination; + dest->outfile = outfile; +} + + +/* + * Prepare for output to a memory buffer. + * The caller may supply an own initial buffer with appropriate size. + * Otherwise, or when the actual data output exceeds the given size, + * the library adapts the buffer size as necessary. + * The standard library functions malloc/free are used for allocating + * larger memory, so the buffer is available to the application after + * finishing compression, and then the application is responsible for + * freeing the requested memory. + * Note: An initial buffer supplied by the caller is expected to be + * managed by the application. The library does not free such buffer + * when allocating a larger buffer. + */ + +GLOBAL(void) +jpeg_mem_dest (j_compress_ptr cinfo, + unsigned char ** outbuffer, unsigned long * outsize) +{ + my_mem_dest_ptr dest; + + if (outbuffer == NULL || outsize == NULL) /* sanity check */ + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* The destination object is made permanent so that multiple JPEG images + * can be written to the same buffer without re-executing jpeg_mem_dest. + */ + if (cinfo->dest == NULL) { /* first time for this JPEG object? */ + cinfo->dest = (struct jpeg_destination_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_mem_destination_mgr)); + } + + dest = (my_mem_dest_ptr) cinfo->dest; + dest->pub.init_destination = init_mem_destination; + dest->pub.empty_output_buffer = empty_mem_output_buffer; + dest->pub.term_destination = term_mem_destination; + dest->outbuffer = outbuffer; + dest->outsize = outsize; + dest->newbuffer = NULL; + + if (*outbuffer == NULL || *outsize == 0) { + /* Allocate initial buffer */ + dest->newbuffer = *outbuffer = (unsigned char *) malloc(OUTPUT_BUF_SIZE); + if (dest->newbuffer == NULL) + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10); + *outsize = OUTPUT_BUF_SIZE; + } + + dest->pub.next_output_byte = dest->buffer = *outbuffer; + dest->pub.free_in_buffer = dest->bufsize = *outsize; +} diff --git a/src/SDL2/external/jpeg-9/jdatasrc.c b/src/SDL2/external/jpeg-9/jdatasrc.c new file mode 100644 index 000000000..7be59a88a --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdatasrc.c @@ -0,0 +1,275 @@ +/* + * jdatasrc.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2009-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains decompression data source routines for the case of + * reading JPEG data from memory or from a file (or any stdio stream). + * While these routines are sufficient for most applications, + * some will want to use a different source manager. + * IMPORTANT: we assume that fread() will correctly transcribe an array of + * JOCTETs from 8-bit-wide elements on external storage. If char is wider + * than 8 bits on your machine, you may need to do some tweaking. + */ + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" + + +/* Expanded data source object for stdio input */ + +typedef struct { + struct jpeg_source_mgr pub; /* public fields */ + + FILE * infile; /* source stream */ + JOCTET * buffer; /* start of buffer */ + boolean start_of_file; /* have we gotten any data yet? */ +} my_source_mgr; + +typedef my_source_mgr * my_src_ptr; + +#define INPUT_BUF_SIZE 4096 /* choose an efficiently fread'able size */ + + +/* + * Initialize source --- called by jpeg_read_header + * before any data is actually read. + */ + +METHODDEF(void) +init_source (j_decompress_ptr cinfo) +{ + my_src_ptr src = (my_src_ptr) cinfo->src; + + /* We reset the empty-input-file flag for each image, + * but we don't clear the input buffer. + * This is correct behavior for reading a series of images from one source. + */ + src->start_of_file = TRUE; +} + +METHODDEF(void) +init_mem_source (j_decompress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Fill the input buffer --- called whenever buffer is emptied. + * + * In typical applications, this should read fresh data into the buffer + * (ignoring the current state of next_input_byte & bytes_in_buffer), + * reset the pointer & count to the start of the buffer, and return TRUE + * indicating that the buffer has been reloaded. It is not necessary to + * fill the buffer entirely, only to obtain at least one more byte. + * + * There is no such thing as an EOF return. If the end of the file has been + * reached, the routine has a choice of ERREXIT() or inserting fake data into + * the buffer. In most cases, generating a warning message and inserting a + * fake EOI marker is the best course of action --- this will allow the + * decompressor to output however much of the image is there. However, + * the resulting error message is misleading if the real problem is an empty + * input file, so we handle that case specially. + * + * In applications that need to be able to suspend compression due to input + * not being available yet, a FALSE return indicates that no more data can be + * obtained right now, but more may be forthcoming later. In this situation, + * the decompressor will return to its caller (with an indication of the + * number of scanlines it has read, if any). The application should resume + * decompression after it has loaded more data into the input buffer. Note + * that there are substantial restrictions on the use of suspension --- see + * the documentation. + * + * When suspending, the decompressor will back up to a convenient restart point + * (typically the start of the current MCU). next_input_byte & bytes_in_buffer + * indicate where the restart point will be if the current call returns FALSE. + * Data beyond this point must be rescanned after resumption, so move it to + * the front of the buffer rather than discarding it. + */ + +METHODDEF(boolean) +fill_input_buffer (j_decompress_ptr cinfo) +{ + my_src_ptr src = (my_src_ptr) cinfo->src; + size_t nbytes; + + nbytes = JFREAD(src->infile, src->buffer, INPUT_BUF_SIZE); + + if (nbytes <= 0) { + if (src->start_of_file) /* Treat empty input file as fatal error */ + ERREXIT(cinfo, JERR_INPUT_EMPTY); + WARNMS(cinfo, JWRN_JPEG_EOF); + /* Insert a fake EOI marker */ + src->buffer[0] = (JOCTET) 0xFF; + src->buffer[1] = (JOCTET) JPEG_EOI; + nbytes = 2; + } + + src->pub.next_input_byte = src->buffer; + src->pub.bytes_in_buffer = nbytes; + src->start_of_file = FALSE; + + return TRUE; +} + +METHODDEF(boolean) +fill_mem_input_buffer (j_decompress_ptr cinfo) +{ + static const JOCTET mybuffer[4] = { + (JOCTET) 0xFF, (JOCTET) JPEG_EOI, 0, 0 + }; + + /* The whole JPEG data is expected to reside in the supplied memory + * buffer, so any request for more data beyond the given buffer size + * is treated as an error. + */ + WARNMS(cinfo, JWRN_JPEG_EOF); + + /* Insert a fake EOI marker */ + + cinfo->src->next_input_byte = mybuffer; + cinfo->src->bytes_in_buffer = 2; + + return TRUE; +} + + +/* + * Skip data --- used to skip over a potentially large amount of + * uninteresting data (such as an APPn marker). + * + * Writers of suspendable-input applications must note that skip_input_data + * is not granted the right to give a suspension return. If the skip extends + * beyond the data currently in the buffer, the buffer can be marked empty so + * that the next read will cause a fill_input_buffer call that can suspend. + * Arranging for additional bytes to be discarded before reloading the input + * buffer is the application writer's problem. + */ + +METHODDEF(void) +skip_input_data (j_decompress_ptr cinfo, long num_bytes) +{ + struct jpeg_source_mgr * src = cinfo->src; + + /* Just a dumb implementation for now. Could use fseek() except + * it doesn't work on pipes. Not clear that being smart is worth + * any trouble anyway --- large skips are infrequent. + */ + if (num_bytes > 0) { + while (num_bytes > (long) src->bytes_in_buffer) { + num_bytes -= (long) src->bytes_in_buffer; + (void) (*src->fill_input_buffer) (cinfo); + /* note we assume that fill_input_buffer will never return FALSE, + * so suspension need not be handled. + */ + } + src->next_input_byte += (size_t) num_bytes; + src->bytes_in_buffer -= (size_t) num_bytes; + } +} + + +/* + * An additional method that can be provided by data source modules is the + * resync_to_restart method for error recovery in the presence of RST markers. + * For the moment, this source module just uses the default resync method + * provided by the JPEG library. That method assumes that no backtracking + * is possible. + */ + + +/* + * Terminate source --- called by jpeg_finish_decompress + * after all data has been read. Often a no-op. + * + * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding + * application must deal with any cleanup that should happen even + * for error exit. + */ + +METHODDEF(void) +term_source (j_decompress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Prepare for input from a stdio stream. + * The caller must have already opened the stream, and is responsible + * for closing it after finishing decompression. + */ + +GLOBAL(void) +jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile) +{ + my_src_ptr src; + + /* The source object and input buffer are made permanent so that a series + * of JPEG images can be read from the same file by calling jpeg_stdio_src + * only before the first one. (If we discarded the buffer at the end of + * one image, we'd likely lose the start of the next one.) + * This makes it unsafe to use this manager and a different source + * manager serially with the same JPEG object. Caveat programmer. + */ + if (cinfo->src == NULL) { /* first time for this JPEG object? */ + cinfo->src = (struct jpeg_source_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_source_mgr)); + src = (my_src_ptr) cinfo->src; + src->buffer = (JOCTET *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + INPUT_BUF_SIZE * SIZEOF(JOCTET)); + } + + src = (my_src_ptr) cinfo->src; + src->pub.init_source = init_source; + src->pub.fill_input_buffer = fill_input_buffer; + src->pub.skip_input_data = skip_input_data; + src->pub.resync_to_restart = jpeg_resync_to_restart; /* use default method */ + src->pub.term_source = term_source; + src->infile = infile; + src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */ + src->pub.next_input_byte = NULL; /* until buffer loaded */ +} + + +/* + * Prepare for input from a supplied memory buffer. + * The buffer must contain the whole JPEG data. + */ + +GLOBAL(void) +jpeg_mem_src (j_decompress_ptr cinfo, + unsigned char * inbuffer, unsigned long insize) +{ + struct jpeg_source_mgr * src; + + if (inbuffer == NULL || insize == 0) /* Treat empty input as fatal error */ + ERREXIT(cinfo, JERR_INPUT_EMPTY); + + /* The source object is made permanent so that a series of JPEG images + * can be read from the same buffer by calling jpeg_mem_src only before + * the first one. + */ + if (cinfo->src == NULL) { /* first time for this JPEG object? */ + cinfo->src = (struct jpeg_source_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(struct jpeg_source_mgr)); + } + + src = cinfo->src; + src->init_source = init_mem_source; + src->fill_input_buffer = fill_mem_input_buffer; + src->skip_input_data = skip_input_data; + src->resync_to_restart = jpeg_resync_to_restart; /* use default method */ + src->term_source = term_source; + src->bytes_in_buffer = (size_t) insize; + src->next_input_byte = (JOCTET *) inbuffer; +} diff --git a/src/SDL2/external/jpeg-9/jdcoefct.c b/src/SDL2/external/jpeg-9/jdcoefct.c new file mode 100644 index 000000000..ed02fc378 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdcoefct.c @@ -0,0 +1,741 @@ +/* + * jdcoefct.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2002-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the coefficient buffer controller for decompression. + * This controller is the top level of the JPEG decompressor proper. + * The coefficient buffer lies between entropy decoding and inverse-DCT steps. + * + * In buffered-image mode, this controller is the interface between + * input-oriented processing and output-oriented processing. + * Also, the input side (only) is used when reading a file for transcoding. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +/* Block smoothing is only applicable for progressive JPEG, so: */ +#ifndef D_PROGRESSIVE_SUPPORTED +#undef BLOCK_SMOOTHING_SUPPORTED +#endif + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_coef_controller pub; /* public fields */ + + /* These variables keep track of the current location of the input side. */ + /* cinfo->input_iMCU_row is also used for this. */ + JDIMENSION MCU_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* The output side's location is represented by cinfo->output_iMCU_row. */ + + /* In single-pass modes, it's sufficient to buffer just one MCU. + * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks, + * and let the entropy decoder write into that workspace each time. + * (On 80x86, the workspace is FAR even though it's not really very big; + * this is to keep the module interfaces unchanged when a large coefficient + * buffer is necessary.) + * In multi-pass modes, this array points to the current MCU's blocks + * within the virtual arrays; it is used only by the input side. + */ + JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU]; + +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* In multi-pass modes, we need a virtual block array for each component. */ + jvirt_barray_ptr whole_image[MAX_COMPONENTS]; +#endif + +#ifdef BLOCK_SMOOTHING_SUPPORTED + /* When doing block smoothing, we latch coefficient Al values here */ + int * coef_bits_latch; +#define SAVED_COEFS 6 /* we save coef_bits[0..5] */ +#endif +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + +/* Forward declarations */ +METHODDEF(int) decompress_onepass + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#ifdef D_MULTISCAN_FILES_SUPPORTED +METHODDEF(int) decompress_data + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#endif +#ifdef BLOCK_SMOOTHING_SUPPORTED +LOCAL(boolean) smoothing_ok JPP((j_decompress_ptr cinfo)); +METHODDEF(int) decompress_smooth_data + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#endif + + +LOCAL(void) +start_iMCU_row (j_decompress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row (input side) */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->MCU_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for an input processing pass. + */ + +METHODDEF(void) +start_input_pass (j_decompress_ptr cinfo) +{ + cinfo->input_iMCU_row = 0; + start_iMCU_row(cinfo); +} + + +/* + * Initialize for an output processing pass. + */ + +METHODDEF(void) +start_output_pass (j_decompress_ptr cinfo) +{ +#ifdef BLOCK_SMOOTHING_SUPPORTED + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* If multipass, check to see whether to use block smoothing on this pass */ + if (coef->pub.coef_arrays != NULL) { + if (cinfo->do_block_smoothing && smoothing_ok(cinfo)) + coef->pub.decompress_data = decompress_smooth_data; + else + coef->pub.decompress_data = decompress_data; + } +#endif + cinfo->output_iMCU_row = 0; +} + + +/* + * Decompress and return some data in the single-pass case. + * Always attempts to emit one fully interleaved MCU row ("iMCU" row). + * Input and output must run in lockstep since we have only a one-MCU buffer. + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + * + * NB: output_buf contains a plane for each component in image, + * which we index according to the component's SOF position. + */ + +METHODDEF(int) +decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, ci, xindex, yindex, yoffset, useful_width; + JSAMPARRAY output_ptr; + JDIMENSION start_col, output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + + /* Loop to process as much as one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col; + MCU_col_num++) { + /* Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. */ + if (cinfo->lim_Se) /* can bypass in DC only case */ + FMEMZERO((void FAR *) coef->MCU_buffer[0], + (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK))); + if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->MCU_ctr = MCU_col_num; + return JPEG_SUSPENDED; + } + /* Determine where data should go in output_buf and do the IDCT thing. + * We skip dummy blocks at the right and bottom edges (but blkn gets + * incremented past them!). Note the inner loop relies on having + * allocated the MCU_buffer[] blocks sequentially. + */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) { + blkn += compptr->MCU_blocks; + continue; + } + inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index]; + useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + output_ptr = output_buf[compptr->component_index] + + yoffset * compptr->DCT_v_scaled_size; + start_col = MCU_col_num * compptr->MCU_sample_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (cinfo->input_iMCU_row < last_iMCU_row || + yoffset+yindex < compptr->last_row_height) { + output_col = start_col; + for (xindex = 0; xindex < useful_width; xindex++) { + (*inverse_DCT) (cinfo, compptr, + (JCOEFPTR) coef->MCU_buffer[blkn+xindex], + output_ptr, output_col); + output_col += compptr->DCT_h_scaled_size; + } + } + blkn += compptr->MCU_width; + output_ptr += compptr->DCT_v_scaled_size; + } + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->MCU_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + cinfo->output_iMCU_row++; + if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { + start_iMCU_row(cinfo); + return JPEG_ROW_COMPLETED; + } + /* Completed the scan */ + (*cinfo->inputctl->finish_input_pass) (cinfo); + return JPEG_SCAN_COMPLETED; +} + + +/* + * Dummy consume-input routine for single-pass operation. + */ + +METHODDEF(int) +dummy_consume_data (j_decompress_ptr cinfo) +{ + return JPEG_SUSPENDED; /* Always indicate nothing was done */ +} + + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Consume input data and store it in the full-image coefficient buffer. + * We read as much as one fully interleaved MCU row ("iMCU" row) per call, + * ie, v_samp_factor block rows for each component in the scan. + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + */ + +METHODDEF(int) +consume_data (j_decompress_ptr cinfo) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + int blkn, ci, xindex, yindex, yoffset; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + cinfo->input_iMCU_row * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, TRUE); + /* Note: entropy decoder expects buffer to be zeroed, + * but this is handled automatically by the memory manager + * because we requested a pre-zeroed array. + */ + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < compptr->MCU_width; xindex++) { + coef->MCU_buffer[blkn++] = buffer_ptr++; + } + } + } + /* Try to fetch the MCU. */ + if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->MCU_ctr = MCU_col_num; + return JPEG_SUSPENDED; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->MCU_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { + start_iMCU_row(cinfo); + return JPEG_ROW_COMPLETED; + } + /* Completed the scan */ + (*cinfo->inputctl->finish_input_pass) (cinfo); + return JPEG_SCAN_COMPLETED; +} + + +/* + * Decompress and return some data in the multi-pass case. + * Always attempts to emit one fully interleaved MCU row ("iMCU" row). + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + * + * NB: output_buf contains a plane for each component in image. + */ + +METHODDEF(int) +decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION block_num; + int ci, block_row, block_rows; + JBLOCKARRAY buffer; + JBLOCKROW buffer_ptr; + JSAMPARRAY output_ptr; + JDIMENSION output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + + /* Force some input to be done if we are getting ahead of the input. */ + while (cinfo->input_scan_number < cinfo->output_scan_number || + (cinfo->input_scan_number == cinfo->output_scan_number && + cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) { + if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) + return JPEG_SUSPENDED; + } + + /* OK, output from the virtual arrays. */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) + continue; + /* Align the virtual buffer for this component. */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + cinfo->output_iMCU_row * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + /* Count non-dummy DCT block rows in this iMCU row. */ + if (cinfo->output_iMCU_row < last_iMCU_row) + block_rows = compptr->v_samp_factor; + else { + /* NB: can't use last_row_height here; it is input-side-dependent! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + } + inverse_DCT = cinfo->idct->inverse_DCT[ci]; + output_ptr = output_buf[ci]; + /* Loop over all DCT blocks to be processed. */ + for (block_row = 0; block_row < block_rows; block_row++) { + buffer_ptr = buffer[block_row]; + output_col = 0; + for (block_num = 0; block_num < compptr->width_in_blocks; block_num++) { + (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr, + output_ptr, output_col); + buffer_ptr++; + output_col += compptr->DCT_h_scaled_size; + } + output_ptr += compptr->DCT_v_scaled_size; + } + } + + if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) + return JPEG_ROW_COMPLETED; + return JPEG_SCAN_COMPLETED; +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + + +#ifdef BLOCK_SMOOTHING_SUPPORTED + +/* + * This code applies interblock smoothing as described by section K.8 + * of the JPEG standard: the first 5 AC coefficients are estimated from + * the DC values of a DCT block and its 8 neighboring blocks. + * We apply smoothing only for progressive JPEG decoding, and only if + * the coefficients it can estimate are not yet known to full precision. + */ + +/* Natural-order array positions of the first 5 zigzag-order coefficients */ +#define Q01_POS 1 +#define Q10_POS 8 +#define Q20_POS 16 +#define Q11_POS 9 +#define Q02_POS 2 + +/* + * Determine whether block smoothing is applicable and safe. + * We also latch the current states of the coef_bits[] entries for the + * AC coefficients; otherwise, if the input side of the decompressor + * advances into a new scan, we might think the coefficients are known + * more accurately than they really are. + */ + +LOCAL(boolean) +smoothing_ok (j_decompress_ptr cinfo) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + boolean smoothing_useful = FALSE; + int ci, coefi; + jpeg_component_info *compptr; + JQUANT_TBL * qtable; + int * coef_bits; + int * coef_bits_latch; + + if (! cinfo->progressive_mode || cinfo->coef_bits == NULL) + return FALSE; + + /* Allocate latch area if not already done */ + if (coef->coef_bits_latch == NULL) + coef->coef_bits_latch = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * + (SAVED_COEFS * SIZEOF(int))); + coef_bits_latch = coef->coef_bits_latch; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* All components' quantization values must already be latched. */ + if ((qtable = compptr->quant_table) == NULL) + return FALSE; + /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */ + if (qtable->quantval[0] == 0 || + qtable->quantval[Q01_POS] == 0 || + qtable->quantval[Q10_POS] == 0 || + qtable->quantval[Q20_POS] == 0 || + qtable->quantval[Q11_POS] == 0 || + qtable->quantval[Q02_POS] == 0) + return FALSE; + /* DC values must be at least partly known for all components. */ + coef_bits = cinfo->coef_bits[ci]; + if (coef_bits[0] < 0) + return FALSE; + /* Block smoothing is helpful if some AC coefficients remain inaccurate. */ + for (coefi = 1; coefi <= 5; coefi++) { + coef_bits_latch[coefi] = coef_bits[coefi]; + if (coef_bits[coefi] != 0) + smoothing_useful = TRUE; + } + coef_bits_latch += SAVED_COEFS; + } + + return smoothing_useful; +} + + +/* + * Variant of decompress_data for use when doing block smoothing. + */ + +METHODDEF(int) +decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION block_num, last_block_column; + int ci, block_row, block_rows, access_rows; + JBLOCKARRAY buffer; + JBLOCKROW buffer_ptr, prev_block_row, next_block_row; + JSAMPARRAY output_ptr; + JDIMENSION output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + boolean first_row, last_row; + JBLOCK workspace; + int *coef_bits; + JQUANT_TBL *quanttbl; + INT32 Q00,Q01,Q02,Q10,Q11,Q20, num; + int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9; + int Al, pred; + + /* Force some input to be done if we are getting ahead of the input. */ + while (cinfo->input_scan_number <= cinfo->output_scan_number && + ! cinfo->inputctl->eoi_reached) { + if (cinfo->input_scan_number == cinfo->output_scan_number) { + /* If input is working on current scan, we ordinarily want it to + * have completed the current row. But if input scan is DC, + * we want it to keep one row ahead so that next block row's DC + * values are up to date. + */ + JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0; + if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta) + break; + } + if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) + return JPEG_SUSPENDED; + } + + /* OK, output from the virtual arrays. */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) + continue; + /* Count non-dummy DCT block rows in this iMCU row. */ + if (cinfo->output_iMCU_row < last_iMCU_row) { + block_rows = compptr->v_samp_factor; + access_rows = block_rows * 2; /* this and next iMCU row */ + last_row = FALSE; + } else { + /* NB: can't use last_row_height here; it is input-side-dependent! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + access_rows = block_rows; /* this iMCU row only */ + last_row = TRUE; + } + /* Align the virtual buffer for this component. */ + if (cinfo->output_iMCU_row > 0) { + access_rows += compptr->v_samp_factor; /* prior iMCU row too */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor, + (JDIMENSION) access_rows, FALSE); + buffer += compptr->v_samp_factor; /* point to current iMCU row */ + first_row = FALSE; + } else { + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE); + first_row = TRUE; + } + /* Fetch component-dependent info */ + coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS); + quanttbl = compptr->quant_table; + Q00 = quanttbl->quantval[0]; + Q01 = quanttbl->quantval[Q01_POS]; + Q10 = quanttbl->quantval[Q10_POS]; + Q20 = quanttbl->quantval[Q20_POS]; + Q11 = quanttbl->quantval[Q11_POS]; + Q02 = quanttbl->quantval[Q02_POS]; + inverse_DCT = cinfo->idct->inverse_DCT[ci]; + output_ptr = output_buf[ci]; + /* Loop over all DCT blocks to be processed. */ + for (block_row = 0; block_row < block_rows; block_row++) { + buffer_ptr = buffer[block_row]; + if (first_row && block_row == 0) + prev_block_row = buffer_ptr; + else + prev_block_row = buffer[block_row-1]; + if (last_row && block_row == block_rows-1) + next_block_row = buffer_ptr; + else + next_block_row = buffer[block_row+1]; + /* We fetch the surrounding DC values using a sliding-register approach. + * Initialize all nine here so as to do the right thing on narrow pics. + */ + DC1 = DC2 = DC3 = (int) prev_block_row[0][0]; + DC4 = DC5 = DC6 = (int) buffer_ptr[0][0]; + DC7 = DC8 = DC9 = (int) next_block_row[0][0]; + output_col = 0; + last_block_column = compptr->width_in_blocks - 1; + for (block_num = 0; block_num <= last_block_column; block_num++) { + /* Fetch current DCT block into workspace so we can modify it. */ + jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1); + /* Update DC values */ + if (block_num < last_block_column) { + DC3 = (int) prev_block_row[1][0]; + DC6 = (int) buffer_ptr[1][0]; + DC9 = (int) next_block_row[1][0]; + } + /* Compute coefficient estimates per K.8. + * An estimate is applied only if coefficient is still zero, + * and is not known to be fully accurate. + */ + /* AC01 */ + if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) { + num = 36 * Q00 * (DC4 - DC6); + if (num >= 0) { + pred = (int) (((Q01<<7) + num) / (Q01<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q10<<7) + num) / (Q10<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q20<<7) + num) / (Q20<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q11<<7) + num) / (Q11<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q02<<7) + num) / (Q02<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<DCT_h_scaled_size; + } + output_ptr += compptr->DCT_v_scaled_size; + } + } + + if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) + return JPEG_ROW_COMPLETED; + return JPEG_SCAN_COMPLETED; +} + +#endif /* BLOCK_SMOOTHING_SUPPORTED */ + + +/* + * Initialize coefficient buffer controller. + */ + +GLOBAL(void) +jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_coef_ptr coef; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = (struct jpeg_d_coef_controller *) coef; + coef->pub.start_input_pass = start_input_pass; + coef->pub.start_output_pass = start_output_pass; +#ifdef BLOCK_SMOOTHING_SUPPORTED + coef->coef_bits_latch = NULL; +#endif + + /* Create the coefficient buffer. */ + if (need_full_buffer) { +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* Allocate a full-image virtual array for each component, */ + /* padded to a multiple of samp_factor DCT blocks in each direction. */ + /* Note we ask for a pre-zeroed array. */ + int ci, access_rows; + jpeg_component_info *compptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + access_rows = compptr->v_samp_factor; +#ifdef BLOCK_SMOOTHING_SUPPORTED + /* If block smoothing could be used, need a bigger window */ + if (cinfo->progressive_mode) + access_rows *= 3; +#endif + coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE, + (JDIMENSION) jround_up((long) compptr->width_in_blocks, + (long) compptr->h_samp_factor), + (JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor), + (JDIMENSION) access_rows); + } + coef->pub.consume_data = consume_data; + coef->pub.decompress_data = decompress_data; + coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */ +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + /* We only need a single-MCU buffer. */ + JBLOCKROW buffer; + int i; + + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) { + coef->MCU_buffer[i] = buffer + i; + } + if (cinfo->lim_Se == 0) /* DC only case: want to bypass later */ + FMEMZERO((void FAR *) buffer, + (size_t) (D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK))); + coef->pub.consume_data = dummy_consume_data; + coef->pub.decompress_data = decompress_onepass; + coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */ + } +} diff --git a/src/SDL2/external/jpeg-9/jdcolor.c b/src/SDL2/external/jpeg-9/jdcolor.c new file mode 100644 index 000000000..939df757a --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdcolor.c @@ -0,0 +1,618 @@ +/* + * jdcolor.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2011-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains output colorspace conversion routines. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private subobject */ + +typedef struct { + struct jpeg_color_deconverter pub; /* public fields */ + + /* Private state for YCC->RGB conversion */ + int * Cr_r_tab; /* => table for Cr to R conversion */ + int * Cb_b_tab; /* => table for Cb to B conversion */ + INT32 * Cr_g_tab; /* => table for Cr to G conversion */ + INT32 * Cb_g_tab; /* => table for Cb to G conversion */ + + /* Private state for RGB->Y conversion */ + INT32 * rgb_y_tab; /* => table for RGB to Y conversion */ +} my_color_deconverter; + +typedef my_color_deconverter * my_cconvert_ptr; + + +/**************** YCbCr -> RGB conversion: most common case **************/ +/**************** RGB -> Y conversion: less common case **************/ + +/* + * YCbCr is defined per CCIR 601-1, except that Cb and Cr are + * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. + * The conversion equations to be implemented are therefore + * + * R = Y + 1.40200 * Cr + * G = Y - 0.34414 * Cb - 0.71414 * Cr + * B = Y + 1.77200 * Cb + * + * Y = 0.29900 * R + 0.58700 * G + 0.11400 * B + * + * where Cb and Cr represent the incoming values less CENTERJSAMPLE. + * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) + * + * To avoid floating-point arithmetic, we represent the fractional constants + * as integers scaled up by 2^16 (about 4 digits precision); we have to divide + * the products by 2^16, with appropriate rounding, to get the correct answer. + * Notice that Y, being an integral input, does not contribute any fraction + * so it need not participate in the rounding. + * + * For even more speed, we avoid doing any multiplications in the inner loop + * by precalculating the constants times Cb and Cr for all possible values. + * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); + * for 12-bit samples it is still acceptable. It's not very reasonable for + * 16-bit samples, but if you want lossless storage you shouldn't be changing + * colorspace anyway. + * The Cr=>R and Cb=>B values can be rounded to integers in advance; the + * values for the G calculation are left scaled up, since we must add them + * together before rounding. + */ + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L<Y conversion and divide it up into + * three parts, instead of doing three alloc_small requests. This lets us + * use a single table base address, which can be held in a register in the + * inner loops on many machines (more than can hold all three addresses, + * anyway). + */ + +#define R_Y_OFF 0 /* offset to R => Y section */ +#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */ +#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */ +#define TABLE_SIZE (3*(MAXJSAMPLE+1)) + + +/* + * Initialize tables for YCC->RGB colorspace conversion. + */ + +LOCAL(void) +build_ycc_rgb_table (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + int i; + INT32 x; + SHIFT_TEMPS + + cconvert->Cr_r_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cb_b_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cr_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + cconvert->Cb_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 1.40200 * x */ + cconvert->Cr_r_tab[i] = (int) + RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); + /* Cb=>B value is nearest int to 1.77200 * x */ + cconvert->Cb_b_tab[i] = (int) + RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); + /* Cr=>G value is scaled-up -0.71414 * x */ + cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x; + /* Cb=>G value is scaled-up -0.34414 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; + } +} + + +/* + * Convert some rows of samples to the output colorspace. + * + * Note that we change from noninterleaved, one-plane-per-component format + * to interleaved-pixel format. The output buffer is therefore three times + * as wide as the input buffer. + * A starting row offset is provided only for the input buffer. The caller + * can easily adjust the passed output_buf value to accommodate any row + * offset required on that side. + */ + +METHODDEF(void) +ycc_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses. */ + outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; + outptr[RGB_GREEN] = range_limit[y + + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS))]; + outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/**************** Cases other than YCbCr -> RGB **************/ + + +/* + * Initialize for RGB->grayscale colorspace conversion. + */ + +LOCAL(void) +build_rgb_y_table (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + INT32 * rgb_y_tab; + INT32 i; + + /* Allocate and fill in the conversion tables. */ + cconvert->rgb_y_tab = rgb_y_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (TABLE_SIZE * SIZEOF(INT32))); + + for (i = 0; i <= MAXJSAMPLE; i++) { + rgb_y_tab[i+R_Y_OFF] = FIX(0.29900) * i; + rgb_y_tab[i+G_Y_OFF] = FIX(0.58700) * i; + rgb_y_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF; + } +} + + +/* + * Convert RGB to grayscale. + */ + +METHODDEF(void) +rgb_gray_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register INT32 * ctab = cconvert->rgb_y_tab; + register int r, g, b; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr0[col]); + g = GETJSAMPLE(inptr1[col]); + b = GETJSAMPLE(inptr2[col]); + /* Y */ + outptr[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + } + } +} + + +/* + * [R-G,G,B-G] to [R,G,B] conversion with modulo calculation + * (inverse color transform). + */ + +METHODDEF(void) +rgb1_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register int r, g, b; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr0[col]); + g = GETJSAMPLE(inptr1[col]); + b = GETJSAMPLE(inptr2[col]); + /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD + * (modulo) operator is equivalent to the bitmask operator AND. + */ + outptr[RGB_RED] = (JSAMPLE) ((r + g - CENTERJSAMPLE) & MAXJSAMPLE); + outptr[RGB_GREEN] = (JSAMPLE) g; + outptr[RGB_BLUE] = (JSAMPLE) ((b + g - CENTERJSAMPLE) & MAXJSAMPLE); + outptr += RGB_PIXELSIZE; + } + } +} + + +/* + * [R-G,G,B-G] to grayscale conversion with modulo calculation + * (inverse color transform). + */ + +METHODDEF(void) +rgb1_gray_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register INT32 * ctab = cconvert->rgb_y_tab; + register int r, g, b; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr0[col]); + g = GETJSAMPLE(inptr1[col]); + b = GETJSAMPLE(inptr2[col]); + /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD + * (modulo) operator is equivalent to the bitmask operator AND. + */ + r = (r + g - CENTERJSAMPLE) & MAXJSAMPLE; + b = (b + g - CENTERJSAMPLE) & MAXJSAMPLE; + /* Y */ + outptr[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + } + } +} + + +/* + * No colorspace change, but conversion from separate-planes + * to interleaved representation. + */ + +METHODDEF(void) +rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + /* We can dispense with GETJSAMPLE() here */ + outptr[RGB_RED] = inptr0[col]; + outptr[RGB_GREEN] = inptr1[col]; + outptr[RGB_BLUE] = inptr2[col]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Color conversion for no colorspace change: just copy the data, + * converting from separate-planes to interleaved representation. + */ + +METHODDEF(void) +null_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + int ci; + register int nc = cinfo->num_components; + register JSAMPROW outptr; + register JSAMPROW inptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + for (ci = 0; ci < nc; ci++) { + inptr = input_buf[ci][input_row]; + outptr = output_buf[0] + ci; + for (col = 0; col < num_cols; col++) { + *outptr = *inptr++; /* needn't bother with GETJSAMPLE() here */ + outptr += nc; + } + } + input_row++; + output_buf++; + } +} + + +/* + * Color conversion for grayscale: just copy the data. + * This also works for YCbCr -> grayscale conversion, in which + * we just copy the Y (luminance) component and ignore chrominance. + */ + +METHODDEF(void) +grayscale_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0, + num_rows, cinfo->output_width); +} + + +/* + * Convert grayscale to RGB: just duplicate the graylevel three times. + * This is provided to support applications that don't want to cope + * with grayscale as a separate case. + */ + +METHODDEF(void) +gray_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW outptr; + register JSAMPROW inptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr = input_buf[0][input_row++]; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + /* We can dispense with GETJSAMPLE() here */ + outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Adobe-style YCCK->CMYK conversion. + * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same + * conversion as above, while passing K (black) unchanged. + * We assume build_ycc_rgb_table has been called. + */ + +METHODDEF(void) +ycck_cmyk_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2, inptr3; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + inptr3 = input_buf[3][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses. */ + outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */ + outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */ + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS)))]; + outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */ + /* K passes through unchanged */ + outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */ + outptr += 4; + } + } +} + + +/* + * Empty method for start_pass. + */ + +METHODDEF(void) +start_pass_dcolor (j_decompress_ptr cinfo) +{ + /* no work needed */ +} + + +/* + * Module initialization routine for output colorspace conversion. + */ + +GLOBAL(void) +jinit_color_deconverter (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert; + int ci; + + cconvert = (my_cconvert_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_color_deconverter)); + cinfo->cconvert = &cconvert->pub; + cconvert->pub.start_pass = start_pass_dcolor; + + /* Make sure num_components agrees with jpeg_color_space */ + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + if (cinfo->num_components != 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_RGB: + case JCS_YCbCr: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_CMYK: + case JCS_YCCK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + default: /* JCS_UNKNOWN can be anything */ + if (cinfo->num_components < 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + } + + /* Support color transform only for RGB colorspace */ + if (cinfo->color_transform && cinfo->jpeg_color_space != JCS_RGB) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + + /* Set out_color_components and conversion method based on requested space. + * Also clear the component_needed flags for any unused components, + * so that earlier pipeline stages can avoid useless computation. + */ + + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + if (cinfo->jpeg_color_space == JCS_GRAYSCALE || + cinfo->jpeg_color_space == JCS_YCbCr) { + cconvert->pub.color_convert = grayscale_convert; + /* For color->grayscale conversion, only the Y (0) component is needed */ + for (ci = 1; ci < cinfo->num_components; ci++) + cinfo->comp_info[ci].component_needed = FALSE; + } else if (cinfo->jpeg_color_space == JCS_RGB) { + switch (cinfo->color_transform) { + case JCT_NONE: + cconvert->pub.color_convert = rgb_gray_convert; + break; + case JCT_SUBTRACT_GREEN: + cconvert->pub.color_convert = rgb1_gray_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + } + build_rgb_y_table(cinfo); + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_RGB: + cinfo->out_color_components = RGB_PIXELSIZE; + if (cinfo->jpeg_color_space == JCS_YCbCr) { + cconvert->pub.color_convert = ycc_rgb_convert; + build_ycc_rgb_table(cinfo); + } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) { + cconvert->pub.color_convert = gray_rgb_convert; + } else if (cinfo->jpeg_color_space == JCS_RGB) { + switch (cinfo->color_transform) { + case JCT_NONE: + cconvert->pub.color_convert = rgb_convert; + break; + case JCT_SUBTRACT_GREEN: + cconvert->pub.color_convert = rgb1_rgb_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + } + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_CMYK: + cinfo->out_color_components = 4; + if (cinfo->jpeg_color_space == JCS_YCCK) { + cconvert->pub.color_convert = ycck_cmyk_convert; + build_ycc_rgb_table(cinfo); + } else if (cinfo->jpeg_color_space == JCS_CMYK) { + cconvert->pub.color_convert = null_convert; + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + default: + /* Permit null conversion to same output space */ + if (cinfo->out_color_space == cinfo->jpeg_color_space) { + cinfo->out_color_components = cinfo->num_components; + cconvert->pub.color_convert = null_convert; + } else /* unsupported non-null conversion */ + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + } + + if (cinfo->quantize_colors) + cinfo->output_components = 1; /* single colormapped output component */ + else + cinfo->output_components = cinfo->out_color_components; +} diff --git a/src/SDL2/external/jpeg-9/jdct.h b/src/SDL2/external/jpeg-9/jdct.h new file mode 100644 index 000000000..360dec80c --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdct.h @@ -0,0 +1,393 @@ +/* + * jdct.h + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This include file contains common declarations for the forward and + * inverse DCT modules. These declarations are private to the DCT managers + * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms. + * The individual DCT algorithms are kept in separate files to ease + * machine-dependent tuning (e.g., assembly coding). + */ + + +/* + * A forward DCT routine is given a pointer to an input sample array and + * a pointer to a work area of type DCTELEM[]; the DCT is to be performed + * in-place in that buffer. Type DCTELEM is int for 8-bit samples, INT32 + * for 12-bit samples. (NOTE: Floating-point DCT implementations use an + * array of type FAST_FLOAT, instead.) + * The input data is to be fetched from the sample array starting at a + * specified column. (Any row offset needed will be applied to the array + * pointer before it is passed to the FDCT code.) + * Note that the number of samples fetched by the FDCT routine is + * DCT_h_scaled_size * DCT_v_scaled_size. + * The DCT outputs are returned scaled up by a factor of 8; they therefore + * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This + * convention improves accuracy in integer implementations and saves some + * work in floating-point ones. + * Quantization of the output coefficients is done by jcdctmgr.c. + */ + +#if BITS_IN_JSAMPLE == 8 +typedef int DCTELEM; /* 16 or 32 bits is fine */ +#else +typedef INT32 DCTELEM; /* must have 32 bits */ +#endif + +typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data, + JSAMPARRAY sample_data, + JDIMENSION start_col)); +typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data, + JSAMPARRAY sample_data, + JDIMENSION start_col)); + + +/* + * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer + * to an output sample array. The routine must dequantize the input data as + * well as perform the IDCT; for dequantization, it uses the multiplier table + * pointed to by compptr->dct_table. The output data is to be placed into the + * sample array starting at a specified column. (Any row offset needed will + * be applied to the array pointer before it is passed to the IDCT code.) + * Note that the number of samples emitted by the IDCT routine is + * DCT_h_scaled_size * DCT_v_scaled_size. + */ + +/* typedef inverse_DCT_method_ptr is declared in jpegint.h */ + +/* + * Each IDCT routine has its own ideas about the best dct_table element type. + */ + +typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */ +#if BITS_IN_JSAMPLE == 8 +typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */ +#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */ +#else +typedef INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */ +#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */ +#endif +typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */ + + +/* + * Each IDCT routine is responsible for range-limiting its results and + * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could + * be quite far out of range if the input data is corrupt, so a bulletproof + * range-limiting step is required. We use a mask-and-table-lookup method + * to do the combined operations quickly. See the comments with + * prepare_range_limit_table (in jdmaster.c) for more info. + */ + +#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit + CENTERJSAMPLE) + +#define RANGE_MASK (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_fdct_islow jFDislow +#define jpeg_fdct_ifast jFDifast +#define jpeg_fdct_float jFDfloat +#define jpeg_fdct_7x7 jFD7x7 +#define jpeg_fdct_6x6 jFD6x6 +#define jpeg_fdct_5x5 jFD5x5 +#define jpeg_fdct_4x4 jFD4x4 +#define jpeg_fdct_3x3 jFD3x3 +#define jpeg_fdct_2x2 jFD2x2 +#define jpeg_fdct_1x1 jFD1x1 +#define jpeg_fdct_9x9 jFD9x9 +#define jpeg_fdct_10x10 jFD10x10 +#define jpeg_fdct_11x11 jFD11x11 +#define jpeg_fdct_12x12 jFD12x12 +#define jpeg_fdct_13x13 jFD13x13 +#define jpeg_fdct_14x14 jFD14x14 +#define jpeg_fdct_15x15 jFD15x15 +#define jpeg_fdct_16x16 jFD16x16 +#define jpeg_fdct_16x8 jFD16x8 +#define jpeg_fdct_14x7 jFD14x7 +#define jpeg_fdct_12x6 jFD12x6 +#define jpeg_fdct_10x5 jFD10x5 +#define jpeg_fdct_8x4 jFD8x4 +#define jpeg_fdct_6x3 jFD6x3 +#define jpeg_fdct_4x2 jFD4x2 +#define jpeg_fdct_2x1 jFD2x1 +#define jpeg_fdct_8x16 jFD8x16 +#define jpeg_fdct_7x14 jFD7x14 +#define jpeg_fdct_6x12 jFD6x12 +#define jpeg_fdct_5x10 jFD5x10 +#define jpeg_fdct_4x8 jFD4x8 +#define jpeg_fdct_3x6 jFD3x6 +#define jpeg_fdct_2x4 jFD2x4 +#define jpeg_fdct_1x2 jFD1x2 +#define jpeg_idct_islow jRDislow +#define jpeg_idct_ifast jRDifast +#define jpeg_idct_float jRDfloat +#define jpeg_idct_7x7 jRD7x7 +#define jpeg_idct_6x6 jRD6x6 +#define jpeg_idct_5x5 jRD5x5 +#define jpeg_idct_4x4 jRD4x4 +#define jpeg_idct_3x3 jRD3x3 +#define jpeg_idct_2x2 jRD2x2 +#define jpeg_idct_1x1 jRD1x1 +#define jpeg_idct_9x9 jRD9x9 +#define jpeg_idct_10x10 jRD10x10 +#define jpeg_idct_11x11 jRD11x11 +#define jpeg_idct_12x12 jRD12x12 +#define jpeg_idct_13x13 jRD13x13 +#define jpeg_idct_14x14 jRD14x14 +#define jpeg_idct_15x15 jRD15x15 +#define jpeg_idct_16x16 jRD16x16 +#define jpeg_idct_16x8 jRD16x8 +#define jpeg_idct_14x7 jRD14x7 +#define jpeg_idct_12x6 jRD12x6 +#define jpeg_idct_10x5 jRD10x5 +#define jpeg_idct_8x4 jRD8x4 +#define jpeg_idct_6x3 jRD6x3 +#define jpeg_idct_4x2 jRD4x2 +#define jpeg_idct_2x1 jRD2x1 +#define jpeg_idct_8x16 jRD8x16 +#define jpeg_idct_7x14 jRD7x14 +#define jpeg_idct_6x12 jRD6x12 +#define jpeg_idct_5x10 jRD5x10 +#define jpeg_idct_4x8 jRD4x8 +#define jpeg_idct_3x6 jRD3x8 +#define jpeg_idct_2x4 jRD2x4 +#define jpeg_idct_1x2 jRD1x2 +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Extern declarations for the forward and inverse DCT routines. */ + +EXTERN(void) jpeg_fdct_islow + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_ifast + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_float + JPP((FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_7x7 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_5x5 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_3x3 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_1x1 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_9x9 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_10x10 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_11x11 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_12x12 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_13x13 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_14x14 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_15x15 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_16x16 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_16x8 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_14x7 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_12x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_10x5 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_8x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x3 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x1 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_8x16 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_7x14 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x12 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_5x10 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x8 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_3x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_1x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); + +EXTERN(void) jpeg_idct_islow + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_ifast + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_float + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_7x7 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_5x5 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_3x3 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_1x1 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_9x9 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_10x10 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_11x11 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_12x12 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_13x13 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_14x14 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_15x15 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_16x16 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_16x8 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_14x7 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_12x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_10x5 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_8x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x3 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x1 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_8x16 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_7x14 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x12 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_5x10 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x8 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_3x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_1x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); + + +/* + * Macros for handling fixed-point arithmetic; these are used by many + * but not all of the DCT/IDCT modules. + * + * All values are expected to be of type INT32. + * Fractional constants are scaled left by CONST_BITS bits. + * CONST_BITS is defined within each module using these macros, + * and may differ from one module to the next. + */ + +#define ONE ((INT32) 1) +#define CONST_SCALE (ONE << CONST_BITS) + +/* Convert a positive real constant to an integer scaled by CONST_SCALE. + * Caution: some C compilers fail to reduce "FIX(constant)" at compile time, + * thus causing a lot of useless floating-point operations at run time. + */ + +#define FIX(x) ((INT32) ((x) * CONST_SCALE + 0.5)) + +/* Descale and correctly round an INT32 value that's scaled by N bits. + * We assume RIGHT_SHIFT rounds towards minus infinity, so adding + * the fudge factor is correct for either sign of X. + */ + +#define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n) + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * This macro is used only when the two inputs will actually be no more than + * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a + * full 32x32 multiply. This provides a useful speedup on many machines. + * Unfortunately there is no way to specify a 16x16->32 multiply portably + * in C, but some C compilers will do the right thing if you provide the + * correct combination of casts. + */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const))) +#endif +#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT32) (const))) +#endif + +#ifndef MULTIPLY16C16 /* default definition */ +#define MULTIPLY16C16(var,const) ((var) * (const)) +#endif + +/* Same except both inputs are variables. */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2))) +#endif + +#ifndef MULTIPLY16V16 /* default definition */ +#define MULTIPLY16V16(var1,var2) ((var1) * (var2)) +#endif diff --git a/src/SDL2/external/jpeg-9/jddctmgr.c b/src/SDL2/external/jpeg-9/jddctmgr.c new file mode 100644 index 000000000..0ded9d574 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jddctmgr.c @@ -0,0 +1,384 @@ +/* + * jddctmgr.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2002-2010 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the inverse-DCT management logic. + * This code selects a particular IDCT implementation to be used, + * and it performs related housekeeping chores. No code in this file + * is executed per IDCT step, only during output pass setup. + * + * Note that the IDCT routines are responsible for performing coefficient + * dequantization as well as the IDCT proper. This module sets up the + * dequantization multiplier table needed by the IDCT routine. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + + +/* + * The decompressor input side (jdinput.c) saves away the appropriate + * quantization table for each component at the start of the first scan + * involving that component. (This is necessary in order to correctly + * decode files that reuse Q-table slots.) + * When we are ready to make an output pass, the saved Q-table is converted + * to a multiplier table that will actually be used by the IDCT routine. + * The multiplier table contents are IDCT-method-dependent. To support + * application changes in IDCT method between scans, we can remake the + * multiplier tables if necessary. + * In buffered-image mode, the first output pass may occur before any data + * has been seen for some components, and thus before their Q-tables have + * been saved away. To handle this case, multiplier tables are preset + * to zeroes; the result of the IDCT will be a neutral gray level. + */ + + +/* Private subobject for this module */ + +typedef struct { + struct jpeg_inverse_dct pub; /* public fields */ + + /* This array contains the IDCT method code that each multiplier table + * is currently set up for, or -1 if it's not yet set up. + * The actual multiplier tables are pointed to by dct_table in the + * per-component comp_info structures. + */ + int cur_method[MAX_COMPONENTS]; +} my_idct_controller; + +typedef my_idct_controller * my_idct_ptr; + + +/* Allocated multiplier tables: big enough for any supported variant */ + +typedef union { + ISLOW_MULT_TYPE islow_array[DCTSIZE2]; +#ifdef DCT_IFAST_SUPPORTED + IFAST_MULT_TYPE ifast_array[DCTSIZE2]; +#endif +#ifdef DCT_FLOAT_SUPPORTED + FLOAT_MULT_TYPE float_array[DCTSIZE2]; +#endif +} multiplier_table; + + +/* The current scaled-IDCT routines require ISLOW-style multiplier tables, + * so be sure to compile that code if either ISLOW or SCALING is requested. + */ +#ifdef DCT_ISLOW_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#else +#ifdef IDCT_SCALING_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#endif +#endif + + +/* + * Prepare for an output pass. + * Here we select the proper IDCT routine for each component and build + * a matching multiplier table. + */ + +METHODDEF(void) +start_pass (j_decompress_ptr cinfo) +{ + my_idct_ptr idct = (my_idct_ptr) cinfo->idct; + int ci, i; + jpeg_component_info *compptr; + int method = 0; + inverse_DCT_method_ptr method_ptr = NULL; + JQUANT_TBL * qtbl; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Select the proper IDCT routine for this component's scaling */ + switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) { +#ifdef IDCT_SCALING_SUPPORTED + case ((1 << 8) + 1): + method_ptr = jpeg_idct_1x1; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 2): + method_ptr = jpeg_idct_2x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((3 << 8) + 3): + method_ptr = jpeg_idct_3x3; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 4): + method_ptr = jpeg_idct_4x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((5 << 8) + 5): + method_ptr = jpeg_idct_5x5; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 6): + method_ptr = jpeg_idct_6x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((7 << 8) + 7): + method_ptr = jpeg_idct_7x7; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((9 << 8) + 9): + method_ptr = jpeg_idct_9x9; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((10 << 8) + 10): + method_ptr = jpeg_idct_10x10; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((11 << 8) + 11): + method_ptr = jpeg_idct_11x11; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((12 << 8) + 12): + method_ptr = jpeg_idct_12x12; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((13 << 8) + 13): + method_ptr = jpeg_idct_13x13; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((14 << 8) + 14): + method_ptr = jpeg_idct_14x14; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((15 << 8) + 15): + method_ptr = jpeg_idct_15x15; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((16 << 8) + 16): + method_ptr = jpeg_idct_16x16; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((16 << 8) + 8): + method_ptr = jpeg_idct_16x8; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((14 << 8) + 7): + method_ptr = jpeg_idct_14x7; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((12 << 8) + 6): + method_ptr = jpeg_idct_12x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((10 << 8) + 5): + method_ptr = jpeg_idct_10x5; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((8 << 8) + 4): + method_ptr = jpeg_idct_8x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 3): + method_ptr = jpeg_idct_6x3; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 2): + method_ptr = jpeg_idct_4x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 1): + method_ptr = jpeg_idct_2x1; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((8 << 8) + 16): + method_ptr = jpeg_idct_8x16; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((7 << 8) + 14): + method_ptr = jpeg_idct_7x14; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 12): + method_ptr = jpeg_idct_6x12; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((5 << 8) + 10): + method_ptr = jpeg_idct_5x10; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 8): + method_ptr = jpeg_idct_4x8; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((3 << 8) + 6): + method_ptr = jpeg_idct_3x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 4): + method_ptr = jpeg_idct_2x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((1 << 8) + 2): + method_ptr = jpeg_idct_1x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; +#endif + case ((DCTSIZE << 8) + DCTSIZE): + switch (cinfo->dct_method) { +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + method_ptr = jpeg_idct_islow; + method = JDCT_ISLOW; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + method_ptr = jpeg_idct_ifast; + method = JDCT_IFAST; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + method_ptr = jpeg_idct_float; + method = JDCT_FLOAT; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + break; + default: + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size); + break; + } + idct->pub.inverse_DCT[ci] = method_ptr; + /* Create multiplier table from quant table. + * However, we can skip this if the component is uninteresting + * or if we already built the table. Also, if no quant table + * has yet been saved for the component, we leave the + * multiplier table all-zero; we'll be reading zeroes from the + * coefficient controller's buffer anyway. + */ + if (! compptr->component_needed || idct->cur_method[ci] == method) + continue; + qtbl = compptr->quant_table; + if (qtbl == NULL) /* happens if no data yet for component */ + continue; + idct->cur_method[ci] = method; + switch (method) { +#ifdef PROVIDE_ISLOW_TABLES + case JDCT_ISLOW: + { + /* For LL&M IDCT method, multipliers are equal to raw quantization + * coefficients, but are stored as ints to ensure access efficiency. + */ + ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table; + for (i = 0; i < DCTSIZE2; i++) { + ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i]; + } + } + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * For integer operation, the multiplier table is to be scaled by + * IFAST_SCALE_BITS. + */ + IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table; +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS + + for (i = 0; i < DCTSIZE2; i++) { + ifmtbl[i] = (IFAST_MULT_TYPE) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), + CONST_BITS-IFAST_SCALE_BITS); + } + } + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 1/8. + */ + FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fmtbl[i] = (FLOAT_MULT_TYPE) + ((double) qtbl->quantval[i] * + aanscalefactor[row] * aanscalefactor[col] * 0.125); + i++; + } + } + } + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Initialize IDCT manager. + */ + +GLOBAL(void) +jinit_inverse_dct (j_decompress_ptr cinfo) +{ + my_idct_ptr idct; + int ci; + jpeg_component_info *compptr; + + idct = (my_idct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_idct_controller)); + cinfo->idct = (struct jpeg_inverse_dct *) idct; + idct->pub.start_pass = start_pass; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate and pre-zero a multiplier table for each component */ + compptr->dct_table = + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(multiplier_table)); + MEMZERO(compptr->dct_table, SIZEOF(multiplier_table)); + /* Mark multiplier table not yet set up for any method */ + idct->cur_method[ci] = -1; + } +} diff --git a/src/SDL2/external/jpeg-9/jdhuff.c b/src/SDL2/external/jpeg-9/jdhuff.c new file mode 100644 index 000000000..e548e689b --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdhuff.c @@ -0,0 +1,1542 @@ +/* + * jdhuff.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2006-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy decoding routines. + * Both sequential and progressive modes are supported in this single module. + * + * Much of the complexity here has to do with supporting input suspension. + * If the data source module demands suspension, we want to be able to back + * up to the start of the current MCU. To do this, we copy state variables + * into local working storage, and update them back to the permanent + * storage only upon successful completion of an MCU. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Derived data constructed for each Huffman table */ + +#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */ + +typedef struct { + /* Basic tables: (element [0] of each array is unused) */ + INT32 maxcode[18]; /* largest code of length k (-1 if none) */ + /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */ + INT32 valoffset[17]; /* huffval[] offset for codes of length k */ + /* valoffset[k] = huffval[] index of 1st symbol of code length k, less + * the smallest code of length k; so given a code of length k, the + * corresponding symbol is huffval[code + valoffset[k]] + */ + + /* Link to public Huffman table (needed only in jpeg_huff_decode) */ + JHUFF_TBL *pub; + + /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of + * the input data stream. If the next Huffman code is no more + * than HUFF_LOOKAHEAD bits long, we can obtain its length and + * the corresponding symbol directly from these tables. + */ + int look_nbits[1< 32 bits on your machine, and shifting/masking longs is + * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE + * appropriately should be a win. Unfortunately we can't define the size + * with something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8) + * because not all machines measure sizeof in 8-bit bytes. + */ + +typedef struct { /* Bitreading state saved across MCUs */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ +} bitread_perm_state; + +typedef struct { /* Bitreading working state within an MCU */ + /* Current data source location */ + /* We need a copy, rather than munging the original, in case of suspension */ + const JOCTET * next_input_byte; /* => next byte to read from source */ + size_t bytes_in_buffer; /* # of bytes remaining in source buffer */ + /* Bit input buffer --- note these values are kept in register variables, + * not in this struct, inside the inner loops. + */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ + /* Pointer needed by jpeg_fill_bit_buffer. */ + j_decompress_ptr cinfo; /* back link to decompress master record */ +} bitread_working_state; + +/* Macros to declare and load/save bitread local variables. */ +#define BITREAD_STATE_VARS \ + register bit_buf_type get_buffer; \ + register int bits_left; \ + bitread_working_state br_state + +#define BITREAD_LOAD_STATE(cinfop,permstate) \ + br_state.cinfo = cinfop; \ + br_state.next_input_byte = cinfop->src->next_input_byte; \ + br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \ + get_buffer = permstate.get_buffer; \ + bits_left = permstate.bits_left; + +#define BITREAD_SAVE_STATE(cinfop,permstate) \ + cinfop->src->next_input_byte = br_state.next_input_byte; \ + cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \ + permstate.get_buffer = get_buffer; \ + permstate.bits_left = bits_left + +/* + * These macros provide the in-line portion of bit fetching. + * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer + * before using GET_BITS, PEEK_BITS, or DROP_BITS. + * The variables get_buffer and bits_left are assumed to be locals, + * but the state struct might not be (jpeg_huff_decode needs this). + * CHECK_BIT_BUFFER(state,n,action); + * Ensure there are N bits in get_buffer; if suspend, take action. + * val = GET_BITS(n); + * Fetch next N bits. + * val = PEEK_BITS(n); + * Fetch next N bits without removing them from the buffer. + * DROP_BITS(n); + * Discard next N bits. + * The value N should be a simple variable, not an expression, because it + * is evaluated multiple times. + */ + +#define CHECK_BIT_BUFFER(state,nbits,action) \ + { if (bits_left < (nbits)) { \ + if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \ + { action; } \ + get_buffer = (state).get_buffer; bits_left = (state).bits_left; } } + +#define GET_BITS(nbits) \ + (((int) (get_buffer >> (bits_left -= (nbits)))) & BIT_MASK(nbits)) + +#define PEEK_BITS(nbits) \ + (((int) (get_buffer >> (bits_left - (nbits)))) & BIT_MASK(nbits)) + +#define DROP_BITS(nbits) \ + (bits_left -= (nbits)) + + +/* + * Code for extracting next Huffman-coded symbol from input bit stream. + * Again, this is time-critical and we make the main paths be macros. + * + * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits + * without looping. Usually, more than 95% of the Huffman codes will be 8 + * or fewer bits long. The few overlength codes are handled with a loop, + * which need not be inline code. + * + * Notes about the HUFF_DECODE macro: + * 1. Near the end of the data segment, we may fail to get enough bits + * for a lookahead. In that case, we do it the hard way. + * 2. If the lookahead table contains no entry, the next code must be + * more than HUFF_LOOKAHEAD bits long. + * 3. jpeg_huff_decode returns -1 if forced to suspend. + */ + +#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \ +{ register int nb, look; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + nb = 1; goto slowlabel; \ + } \ + } \ + look = PEEK_BITS(HUFF_LOOKAHEAD); \ + if ((nb = htbl->look_nbits[look]) != 0) { \ + DROP_BITS(nb); \ + result = htbl->look_sym[look]; \ + } else { \ + nb = HUFF_LOOKAHEAD+1; \ +slowlabel: \ + if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \ + { failaction; } \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + } \ +} + + +/* + * Expanded entropy decoder object for Huffman decoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + unsigned int EOBRUN; /* remaining EOBs in EOBRUN */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).EOBRUN = (src).EOBRUN, \ + (dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + /* These fields are loaded into local variables at start of each MCU. + * In case of suspension, we exit WITHOUT updating them. + */ + bitread_perm_state bitstate; /* Bit buffer at start of MCU */ + savable_state saved; /* Other state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + boolean insufficient_data; /* set TRUE after emitting warning */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Following two fields used only in progressive mode */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; + + d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */ + + /* Following fields used only in sequential mode */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; + d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; + + /* Precalculated info set up by start_pass for use in decode_mcu: */ + + /* Pointers to derived tables to be used for each block within an MCU */ + d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU]; + d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU]; + /* Whether we care about the DC and AC coefficient values for each block */ + int coef_limit[D_MAX_BLOCKS_IN_MCU]; +} huff_entropy_decoder; + +typedef huff_entropy_decoder * huff_entropy_ptr; + + +static const int jpeg_zigzag_order[8][8] = { + { 0, 1, 5, 6, 14, 15, 27, 28 }, + { 2, 4, 7, 13, 16, 26, 29, 42 }, + { 3, 8, 12, 17, 25, 30, 41, 43 }, + { 9, 11, 18, 24, 31, 40, 44, 53 }, + { 10, 19, 23, 32, 39, 45, 52, 54 }, + { 20, 22, 33, 38, 46, 51, 55, 60 }, + { 21, 34, 37, 47, 50, 56, 59, 61 }, + { 35, 36, 48, 49, 57, 58, 62, 63 } +}; + +static const int jpeg_zigzag_order7[7][7] = { + { 0, 1, 5, 6, 14, 15, 27 }, + { 2, 4, 7, 13, 16, 26, 28 }, + { 3, 8, 12, 17, 25, 29, 38 }, + { 9, 11, 18, 24, 30, 37, 39 }, + { 10, 19, 23, 31, 36, 40, 45 }, + { 20, 22, 32, 35, 41, 44, 46 }, + { 21, 33, 34, 42, 43, 47, 48 } +}; + +static const int jpeg_zigzag_order6[6][6] = { + { 0, 1, 5, 6, 14, 15 }, + { 2, 4, 7, 13, 16, 25 }, + { 3, 8, 12, 17, 24, 26 }, + { 9, 11, 18, 23, 27, 32 }, + { 10, 19, 22, 28, 31, 33 }, + { 20, 21, 29, 30, 34, 35 } +}; + +static const int jpeg_zigzag_order5[5][5] = { + { 0, 1, 5, 6, 14 }, + { 2, 4, 7, 13, 15 }, + { 3, 8, 12, 16, 21 }, + { 9, 11, 17, 20, 22 }, + { 10, 18, 19, 23, 24 } +}; + +static const int jpeg_zigzag_order4[4][4] = { + { 0, 1, 5, 6 }, + { 2, 4, 7, 12 }, + { 3, 8, 11, 13 }, + { 9, 10, 14, 15 } +}; + +static const int jpeg_zigzag_order3[3][3] = { + { 0, 1, 5 }, + { 2, 4, 6 }, + { 3, 7, 8 } +}; + +static const int jpeg_zigzag_order2[2][2] = { + { 0, 1 }, + { 2, 3 } +}; + + +/* + * Compute the derived values for a Huffman table. + * This routine also performs some validation checks on the table. + */ + +LOCAL(void) +jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno, + d_derived_tbl ** pdtbl) +{ + JHUFF_TBL *htbl; + d_derived_tbl *dtbl; + int p, i, l, si, numsymbols; + int lookbits, ctr; + char huffsize[257]; + unsigned int huffcode[257]; + unsigned int code; + + /* Note that huffsize[] and huffcode[] are filled in code-length order, + * paralleling the order of the symbols themselves in htbl->huffval[]. + */ + + /* Find the input Huffman table */ + if (tblno < 0 || tblno >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + htbl = + isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + + /* Allocate a workspace if we haven't already done so. */ + if (*pdtbl == NULL) + *pdtbl = (d_derived_tbl *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(d_derived_tbl)); + dtbl = *pdtbl; + dtbl->pub = htbl; /* fill in back link */ + + /* Figure C.1: make table of Huffman code length for each symbol */ + + p = 0; + for (l = 1; l <= 16; l++) { + i = (int) htbl->bits[l]; + if (i < 0 || p + i > 256) /* protect against table overrun */ + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + while (i--) + huffsize[p++] = (char) l; + } + huffsize[p] = 0; + numsymbols = p; + + /* Figure C.2: generate the codes themselves */ + /* We also validate that the counts represent a legal Huffman code tree. */ + + code = 0; + si = huffsize[0]; + p = 0; + while (huffsize[p]) { + while (((int) huffsize[p]) == si) { + huffcode[p++] = code; + code++; + } + /* code is now 1 more than the last code used for codelength si; but + * it must still fit in si bits, since no code is allowed to be all ones. + */ + if (((INT32) code) >= (((INT32) 1) << si)) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + code <<= 1; + si++; + } + + /* Figure F.15: generate decoding tables for bit-sequential decoding */ + + p = 0; + for (l = 1; l <= 16; l++) { + if (htbl->bits[l]) { + /* valoffset[l] = huffval[] index of 1st symbol of code length l, + * minus the minimum code of length l + */ + dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p]; + p += htbl->bits[l]; + dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */ + } else { + dtbl->maxcode[l] = -1; /* -1 if no codes of this length */ + } + } + dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */ + + /* Compute lookahead tables to speed up decoding. + * First we set all the table entries to 0, indicating "too long"; + * then we iterate through the Huffman codes that are short enough and + * fill in all the entries that correspond to bit sequences starting + * with that code. + */ + + MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits)); + + p = 0; + for (l = 1; l <= HUFF_LOOKAHEAD; l++) { + for (i = 1; i <= (int) htbl->bits[l]; i++, p++) { + /* l = current code's length, p = its index in huffcode[] & huffval[]. */ + /* Generate left-justified code followed by all possible bit sequences */ + lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l); + for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) { + dtbl->look_nbits[lookbits] = l; + dtbl->look_sym[lookbits] = htbl->huffval[p]; + lookbits++; + } + } + } + + /* Validate symbols as being reasonable. + * For AC tables, we make no check, but accept all byte values 0..255. + * For DC tables, we require the symbols to be in range 0..15. + * (Tighter bounds could be applied depending on the data depth and mode, + * but this is sufficient to ensure safe decoding.) + */ + if (isDC) { + for (i = 0; i < numsymbols; i++) { + int sym = htbl->huffval[i]; + if (sym < 0 || sym > 15) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + } + } +} + + +/* + * Out-of-line code for bit fetching. + * Note: current values of get_buffer and bits_left are passed as parameters, + * but are returned in the corresponding fields of the state struct. + * + * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width + * of get_buffer to be used. (On machines with wider words, an even larger + * buffer could be used.) However, on some machines 32-bit shifts are + * quite slow and take time proportional to the number of places shifted. + * (This is true with most PC compilers, for instance.) In this case it may + * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the + * average shift distance at the cost of more calls to jpeg_fill_bit_buffer. + */ + +#ifdef SLOW_SHIFT_32 +#define MIN_GET_BITS 15 /* minimum allowable value */ +#else +#define MIN_GET_BITS (BIT_BUF_SIZE-7) +#endif + + +LOCAL(boolean) +jpeg_fill_bit_buffer (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + int nbits) +/* Load up the bit buffer to a depth of at least nbits */ +{ + /* Copy heavily used state fields into locals (hopefully registers) */ + register const JOCTET * next_input_byte = state->next_input_byte; + register size_t bytes_in_buffer = state->bytes_in_buffer; + j_decompress_ptr cinfo = state->cinfo; + + /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */ + /* (It is assumed that no request will be for more than that many bits.) */ + /* We fail to do so only if we hit a marker or are forced to suspend. */ + + if (cinfo->unread_marker == 0) { /* cannot advance past a marker */ + while (bits_left < MIN_GET_BITS) { + register int c; + + /* Attempt to read a byte */ + if (bytes_in_buffer == 0) { + if (! (*cinfo->src->fill_input_buffer) (cinfo)) + return FALSE; + next_input_byte = cinfo->src->next_input_byte; + bytes_in_buffer = cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + + /* If it's 0xFF, check and discard stuffed zero byte */ + if (c == 0xFF) { + /* Loop here to discard any padding FF's on terminating marker, + * so that we can save a valid unread_marker value. NOTE: we will + * accept multiple FF's followed by a 0 as meaning a single FF data + * byte. This data pattern is not valid according to the standard. + */ + do { + if (bytes_in_buffer == 0) { + if (! (*cinfo->src->fill_input_buffer) (cinfo)) + return FALSE; + next_input_byte = cinfo->src->next_input_byte; + bytes_in_buffer = cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + } while (c == 0xFF); + + if (c == 0) { + /* Found FF/00, which represents an FF data byte */ + c = 0xFF; + } else { + /* Oops, it's actually a marker indicating end of compressed data. + * Save the marker code for later use. + * Fine point: it might appear that we should save the marker into + * bitread working state, not straight into permanent state. But + * once we have hit a marker, we cannot need to suspend within the + * current MCU, because we will read no more bytes from the data + * source. So it is OK to update permanent state right away. + */ + cinfo->unread_marker = c; + /* See if we need to insert some fake zero bits. */ + goto no_more_bytes; + } + } + + /* OK, load c into get_buffer */ + get_buffer = (get_buffer << 8) | c; + bits_left += 8; + } /* end while */ + } else { + no_more_bytes: + /* We get here if we've read the marker that terminates the compressed + * data segment. There should be enough bits in the buffer register + * to satisfy the request; if so, no problem. + */ + if (nbits > bits_left) { + /* Uh-oh. Report corrupted data to user and stuff zeroes into + * the data stream, so that we can produce some kind of image. + * We use a nonvolatile flag to ensure that only one warning message + * appears per data segment. + */ + if (! ((huff_entropy_ptr) cinfo->entropy)->insufficient_data) { + WARNMS(cinfo, JWRN_HIT_MARKER); + ((huff_entropy_ptr) cinfo->entropy)->insufficient_data = TRUE; + } + /* Fill the buffer with zero bits */ + get_buffer <<= MIN_GET_BITS - bits_left; + bits_left = MIN_GET_BITS; + } + } + + /* Unload the local registers */ + state->next_input_byte = next_input_byte; + state->bytes_in_buffer = bytes_in_buffer; + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + return TRUE; +} + + +/* + * Figure F.12: extend sign bit. + * On some machines, a shift and sub will be faster than a table lookup. + */ + +#ifdef AVOID_TABLES + +#define BIT_MASK(nbits) ((1<<(nbits))-1) +#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) - ((1<<(s))-1) : (x)) + +#else + +#define BIT_MASK(nbits) bmask[nbits] +#define HUFF_EXTEND(x,s) ((x) <= bmask[(s) - 1] ? (x) - bmask[s] : (x)) + +static const int bmask[16] = /* bmask[n] is mask for n rightmost bits */ + { 0, 0x0001, 0x0003, 0x0007, 0x000F, 0x001F, 0x003F, 0x007F, 0x00FF, + 0x01FF, 0x03FF, 0x07FF, 0x0FFF, 0x1FFF, 0x3FFF, 0x7FFF }; + +#endif /* AVOID_TABLES */ + + +/* + * Out-of-line code for Huffman code decoding. + */ + +LOCAL(int) +jpeg_huff_decode (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + d_derived_tbl * htbl, int min_bits) +{ + register int l = min_bits; + register INT32 code; + + /* HUFF_DECODE has determined that the code is at least min_bits */ + /* bits long, so fetch that many bits in one swoop. */ + + CHECK_BIT_BUFFER(*state, l, return -1); + code = GET_BITS(l); + + /* Collect the rest of the Huffman code one bit at a time. */ + /* This is per Figure F.16 in the JPEG spec. */ + + while (code > htbl->maxcode[l]) { + code <<= 1; + CHECK_BIT_BUFFER(*state, 1, return -1); + code |= GET_BITS(1); + l++; + } + + /* Unload the local registers */ + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + /* With garbage input we may reach the sentinel value l = 17. */ + + if (l > 16) { + WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE); + return 0; /* fake a zero as the safest result */ + } + + return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ]; +} + + +/* + * Check for a restart marker & resynchronize decoder. + * Returns FALSE if must suspend. + */ + +LOCAL(boolean) +process_restart (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci; + + /* Throw away any unused bits remaining in bit buffer; */ + /* include any full bytes in next_marker's count of discarded bytes */ + cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; + entropy->bitstate.bits_left = 0; + + /* Advance past the RSTn marker */ + if (! (*cinfo->marker->read_restart_marker) (cinfo)) + return FALSE; + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + /* Re-init EOB run count, too */ + entropy->saved.EOBRUN = 0; + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; + + /* Reset out-of-data flag, unless read_restart_marker left us smack up + * against a marker. In that case we will end up treating the next data + * segment as empty, and we can avoid producing bogus output pixels by + * leaving the flag set. + */ + if (cinfo->unread_marker == 0) + entropy->insufficient_data = FALSE; + + return TRUE; +} + + +/* + * Huffman MCU decoding. + * Each of these routines decodes and returns one MCU's worth of + * Huffman-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. + * (Wholesale zeroing is usually a little faster than retail...) + * + * We return FALSE if data source requested suspension. In that case no + * changes have been made to permanent state. (Exception: some output + * coefficients may already have been assigned. This is harmless for + * spectral selection, since we'll just re-assign them on the next call. + * Successive approximation AC refinement has to be more careful, however.) + */ + +/* + * MCU decoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int Al = cinfo->Al; + register int s, r; + int blkn, ci; + JBLOCKROW block; + BITREAD_STATE_VARS; + savable_state state; + d_derived_tbl * tbl; + jpeg_component_info * compptr; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + tbl = entropy->derived_tbls[compptr->dc_tbl_no]; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + HUFF_DECODE(s, br_state, tbl, return FALSE, label1); + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + + /* Convert DC difference to actual value, update last_dc_val */ + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */ + (*block)[0] = (JCOEF) (s << Al); + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int s, k, r; + unsigned int EOBRUN; + int Se, Al; + const int * natural_order; + JBLOCKROW block; + BITREAD_STATE_VARS; + d_derived_tbl * tbl; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + + /* Load up working state. + * We can avoid loading/saving bitread state if in an EOB run. + */ + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + + if (EOBRUN) /* if it's a band of zeroes... */ + EOBRUN--; /* ...process it now (we do nothing) */ + else { + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + for (k = cinfo->Ss; k <= Se; k++) { + HUFF_DECODE(s, br_state, tbl, return FALSE, label2); + r = s >> 4; + s &= 15; + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Scale and output coefficient in natural (dezigzagged) order */ + (*block)[natural_order[k]] = (JCOEF) (s << Al); + } else { + if (r != 15) { /* EOBr, run length is 2^r + appended bits */ + if (r) { /* EOBr, r > 0 */ + EOBRUN = 1 << r; + CHECK_BIT_BUFFER(br_state, r, return FALSE); + r = GET_BITS(r); + EOBRUN += r; + EOBRUN--; /* this band is processed at this moment */ + } + break; /* force end-of-band */ + } + k += 15; /* ZRL: skip 15 zeroes in band */ + } + } + + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + } + + /* Completed MCU, so update state */ + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, although the spec + * is not very clear on the point. + */ + +METHODDEF(boolean) +decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + int blkn; + JBLOCKROW block; + BITREAD_STATE_VARS; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* Not worth the cycles to check insufficient_data here, + * since we will not change the data anyway if we read zeroes. + */ + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + + /* Encoded data is simply the next bit of the two's-complement DC value */ + CHECK_BIT_BUFFER(br_state, 1, return FALSE); + if (GET_BITS(1)) + (*block)[0] |= p1; + /* Note: since we use |=, repeating the assignment later is safe */ + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int s, k, r; + unsigned int EOBRUN; + int Se, p1, m1; + const int * natural_order; + JBLOCKROW block; + JCOEFPTR thiscoef; + BITREAD_STATE_VARS; + d_derived_tbl * tbl; + int num_newnz; + int newnz_pos[DCTSIZE2]; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, don't modify the MCU. + */ + if (! entropy->insufficient_data) { + + Se = cinfo->Se; + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ + natural_order = cinfo->natural_order; + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + /* If we are forced to suspend, we must undo the assignments to any newly + * nonzero coefficients in the block, because otherwise we'd get confused + * next time about which coefficients were already nonzero. + * But we need not undo addition of bits to already-nonzero coefficients; + * instead, we can test the current bit to see if we already did it. + */ + num_newnz = 0; + + /* initialize coefficient loop counter to start of band */ + k = cinfo->Ss; + + if (EOBRUN == 0) { + do { + HUFF_DECODE(s, br_state, tbl, goto undoit, label3); + r = s >> 4; + s &= 15; + if (s) { + if (s != 1) /* size of new coef should always be 1 */ + WARNMS(cinfo, JWRN_HUFF_BAD_CODE); + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) + s = p1; /* newly nonzero coef is positive */ + else + s = m1; /* newly nonzero coef is negative */ + } else { + if (r != 15) { + EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */ + if (r) { + CHECK_BIT_BUFFER(br_state, r, goto undoit); + r = GET_BITS(r); + EOBRUN += r; + } + break; /* rest of block is handled by EOB logic */ + } + /* note s = 0 for processing ZRL */ + } + /* Advance over already-nonzero coefs and r still-zero coefs, + * appending correction bits to the nonzeroes. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + do { + thiscoef = *block + natural_order[k]; + if (*thiscoef) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already set it */ + if (*thiscoef >= 0) + *thiscoef += p1; + else + *thiscoef += m1; + } + } + } else { + if (--r < 0) + break; /* reached target zero coefficient */ + } + k++; + } while (k <= Se); + if (s) { + int pos = natural_order[k]; + /* Output newly nonzero coefficient */ + (*block)[pos] = (JCOEF) s; + /* Remember its position in case we have to suspend */ + newnz_pos[num_newnz++] = pos; + } + k++; + } while (k <= Se); + } + + if (EOBRUN) { + /* Scan any remaining coefficient positions after the end-of-band + * (the last newly nonzero coefficient, if any). Append a correction + * bit to each already-nonzero coefficient. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + do { + thiscoef = *block + natural_order[k]; + if (*thiscoef) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */ + if (*thiscoef >= 0) + *thiscoef += p1; + else + *thiscoef += m1; + } + } + } + k++; + } while (k <= Se); + /* Count one block completed in EOB run */ + EOBRUN--; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; + +undoit: + /* Re-zero any output coefficients that we made newly nonzero */ + while (num_newnz) + (*block)[newnz_pos[--num_newnz]] = 0; + + return FALSE; +} + + +/* + * Decode one MCU's worth of Huffman-compressed coefficients, + * partial blocks. + */ + +METHODDEF(boolean) +decode_mcu_sub (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + const int * natural_order; + int Se, blkn; + BITREAD_STATE_VARS; + savable_state state; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + natural_order = cinfo->natural_order; + Se = cinfo->lim_Se; + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + JBLOCKROW block = MCU_data[blkn]; + d_derived_tbl * htbl; + register int s, k, r; + int coef_limit, ci; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + htbl = entropy->dc_cur_tbls[blkn]; + HUFF_DECODE(s, br_state, htbl, return FALSE, label1); + + htbl = entropy->ac_cur_tbls[blkn]; + k = 1; + coef_limit = entropy->coef_limit[blkn]; + if (coef_limit) { + /* Convert DC difference to actual value, update last_dc_val */ + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + ci = cinfo->MCU_membership[blkn]; + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Output the DC coefficient */ + (*block)[0] = (JCOEF) s; + + /* Section F.2.2.2: decode the AC coefficients */ + /* Since zeroes are skipped, output area must be cleared beforehand */ + for (; k < coef_limit; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label2); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Output coefficient in natural (dezigzagged) order. + * Note: the extra entries in natural_order[] will save us + * if k > Se, which could happen if the data is corrupted. + */ + (*block)[natural_order[k]] = (JCOEF) s; + } else { + if (r != 15) + goto EndOfBlock; + k += 15; + } + } + } else { + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } + } + + /* Section F.2.2.2: decode the AC coefficients */ + /* In this path we just discard the values */ + for (; k <= Se; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label3); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } else { + if (r != 15) + break; + k += 15; + } + } + + EndOfBlock: ; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * Decode one MCU's worth of Huffman-compressed coefficients, + * full-size blocks. + */ + +METHODDEF(boolean) +decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int blkn; + BITREAD_STATE_VARS; + savable_state state; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + JBLOCKROW block = MCU_data[blkn]; + d_derived_tbl * htbl; + register int s, k, r; + int coef_limit, ci; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + htbl = entropy->dc_cur_tbls[blkn]; + HUFF_DECODE(s, br_state, htbl, return FALSE, label1); + + htbl = entropy->ac_cur_tbls[blkn]; + k = 1; + coef_limit = entropy->coef_limit[blkn]; + if (coef_limit) { + /* Convert DC difference to actual value, update last_dc_val */ + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + ci = cinfo->MCU_membership[blkn]; + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Output the DC coefficient */ + (*block)[0] = (JCOEF) s; + + /* Section F.2.2.2: decode the AC coefficients */ + /* Since zeroes are skipped, output area must be cleared beforehand */ + for (; k < coef_limit; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label2); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Output coefficient in natural (dezigzagged) order. + * Note: the extra entries in jpeg_natural_order[] will save us + * if k >= DCTSIZE2, which could happen if the data is corrupted. + */ + (*block)[jpeg_natural_order[k]] = (JCOEF) s; + } else { + if (r != 15) + goto EndOfBlock; + k += 15; + } + } + } else { + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } + } + + /* Section F.2.2.2: decode the AC coefficients */ + /* In this path we just discard the values */ + for (; k < DCTSIZE2; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label3); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } else { + if (r != 15) + break; + k += 15; + } + } + + EndOfBlock: ; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * Initialize for a Huffman-compressed scan. + */ + +METHODDEF(void) +start_pass_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, blkn, tbl, i; + jpeg_component_info * compptr; + + if (cinfo->progressive_mode) { + /* Validate progressive scan parameters */ + if (cinfo->Ss == 0) { + if (cinfo->Se != 0) + goto bad; + } else { + /* need not check Ss/Se < 0 since they came from unsigned bytes */ + if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se) + goto bad; + /* AC scans may have only one component */ + if (cinfo->comps_in_scan != 1) + goto bad; + } + if (cinfo->Ah != 0) { + /* Successive approximation refinement scan: must have Al = Ah-1. */ + if (cinfo->Ah-1 != cinfo->Al) + goto bad; + } + if (cinfo->Al > 13) { /* need not check for < 0 */ + /* Arguably the maximum Al value should be less than 13 for 8-bit precision, + * but the spec doesn't say so, and we try to be liberal about what we + * accept. Note: large Al values could result in out-of-range DC + * coefficients during early scans, leading to bizarre displays due to + * overflows in the IDCT math. But we won't crash. + */ + bad: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + } + /* Update progression status, and verify that scan order is legal. + * Note that inter-scan inconsistencies are treated as warnings + * not fatal errors ... not clear if this is right way to behave. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + int coefi, cindex = cinfo->cur_comp_info[ci]->component_index; + int *coef_bit_ptr = & cinfo->coef_bits[cindex][0]; + if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); + for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { + int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; + if (cinfo->Ah != expected) + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); + coef_bit_ptr[coefi] = cinfo->Al; + } + } + + /* Select MCU decoding routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_first; + else + entropy->pub.decode_mcu = decode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_refine; + else + entropy->pub.decode_mcu = decode_mcu_AC_refine; + } + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Make sure requested tables are present, and compute derived tables. + * We may build same derived table more than once, but it's not expensive. + */ + if (cinfo->Ss == 0) { + if (cinfo->Ah == 0) { /* DC refinement needs no table */ + tbl = compptr->dc_tbl_no; + jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, + & entropy->derived_tbls[tbl]); + } + } else { + tbl = compptr->ac_tbl_no; + jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, + & entropy->derived_tbls[tbl]); + /* remember the single active table */ + entropy->ac_derived_tbl = entropy->derived_tbls[tbl]; + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Initialize private state variables */ + entropy->saved.EOBRUN = 0; + } else { + /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. + * This ought to be an error condition, but we make it a warning because + * there are some baseline files out there with all zeroes in these bytes. + */ + if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 || + ((cinfo->is_baseline || cinfo->Se < DCTSIZE2) && + cinfo->Se != cinfo->lim_Se)) + WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); + + /* Select MCU decoding routine */ + /* We retain the hard-coded case for full-size blocks. + * This is not necessary, but it appears that this version is slightly + * more performant in the given implementation. + * With an improved implementation we would prefer a single optimized + * function. + */ + if (cinfo->lim_Se != DCTSIZE2-1) + entropy->pub.decode_mcu = decode_mcu_sub; + else + entropy->pub.decode_mcu = decode_mcu; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Compute derived values for Huffman tables */ + /* We may do this more than once for a table, but it's not expensive */ + tbl = compptr->dc_tbl_no; + jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, + & entropy->dc_derived_tbls[tbl]); + if (cinfo->lim_Se) { /* AC needs no table when not present */ + tbl = compptr->ac_tbl_no; + jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, + & entropy->ac_derived_tbls[tbl]); + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Precalculate decoding info for each block in an MCU of this scan */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + /* Precalculate which table to use for each block */ + entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no]; + entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no]; + /* Decide whether we really care about the coefficient values */ + if (compptr->component_needed) { + ci = compptr->DCT_v_scaled_size; + i = compptr->DCT_h_scaled_size; + switch (cinfo->lim_Se) { + case (1*1-1): + entropy->coef_limit[blkn] = 1; + break; + case (2*2-1): + if (ci <= 0 || ci > 2) ci = 2; + if (i <= 0 || i > 2) i = 2; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order2[ci - 1][i - 1]; + break; + case (3*3-1): + if (ci <= 0 || ci > 3) ci = 3; + if (i <= 0 || i > 3) i = 3; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order3[ci - 1][i - 1]; + break; + case (4*4-1): + if (ci <= 0 || ci > 4) ci = 4; + if (i <= 0 || i > 4) i = 4; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order4[ci - 1][i - 1]; + break; + case (5*5-1): + if (ci <= 0 || ci > 5) ci = 5; + if (i <= 0 || i > 5) i = 5; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order5[ci - 1][i - 1]; + break; + case (6*6-1): + if (ci <= 0 || ci > 6) ci = 6; + if (i <= 0 || i > 6) i = 6; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order6[ci - 1][i - 1]; + break; + case (7*7-1): + if (ci <= 0 || ci > 7) ci = 7; + if (i <= 0 || i > 7) i = 7; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order7[ci - 1][i - 1]; + break; + default: + if (ci <= 0 || ci > 8) ci = 8; + if (i <= 0 || i > 8) i = 8; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order[ci - 1][i - 1]; + break; + } + } else { + entropy->coef_limit[blkn] = 0; + } + } + } + + /* Initialize bitread state variables */ + entropy->bitstate.bits_left = 0; + entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ + entropy->insufficient_data = FALSE; + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Module initialization routine for Huffman entropy decoding. + */ + +GLOBAL(void) +jinit_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy; + int i; + + entropy = (huff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(huff_entropy_decoder)); + cinfo->entropy = &entropy->pub; + entropy->pub.start_pass = start_pass_huff_decoder; + + if (cinfo->progressive_mode) { + /* Create progression status table */ + int *coef_bit_ptr, ci; + cinfo->coef_bits = (int (*)[DCTSIZE2]) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components*DCTSIZE2*SIZEOF(int)); + coef_bit_ptr = & cinfo->coef_bits[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (i = 0; i < DCTSIZE2; i++) + *coef_bit_ptr++ = -1; + + /* Mark derived tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->derived_tbls[i] = NULL; + } + } else { + /* Mark tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; + } + } +} diff --git a/src/SDL2/external/jpeg-9/jdinput.c b/src/SDL2/external/jpeg-9/jdinput.c new file mode 100644 index 000000000..2c5c717b9 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdinput.c @@ -0,0 +1,661 @@ +/* + * jdinput.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2002-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains input control logic for the JPEG decompressor. + * These routines are concerned with controlling the decompressor's input + * processing (marker reading and coefficient decoding). The actual input + * reading is done in jdmarker.c, jdhuff.c, and jdarith.c. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_input_controller pub; /* public fields */ + + int inheaders; /* Nonzero until first SOS is reached */ +} my_input_controller; + +typedef my_input_controller * my_inputctl_ptr; + + +/* Forward declarations */ +METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo)); + + +/* + * Routines to calculate various quantities related to the size of the image. + */ + + +/* + * Compute output image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + */ + +GLOBAL(void) +jpeg_core_output_dimensions (j_decompress_ptr cinfo) +/* Do computations that are needed before master selection phase. + * This function is used for transcoding and full decompression. + */ +{ +#ifdef IDCT_SCALING_SUPPORTED + int ci; + jpeg_component_info *compptr; + + /* Compute actual output image dimensions and DCT scaling choices. */ + if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom) { + /* Provide 1/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 1; + cinfo->min_DCT_v_scaled_size = 1; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 2) { + /* Provide 2/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 2L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 2L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 2; + cinfo->min_DCT_v_scaled_size = 2; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 3) { + /* Provide 3/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 3L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 3L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 3; + cinfo->min_DCT_v_scaled_size = 3; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 4) { + /* Provide 4/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 4L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 4L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 4; + cinfo->min_DCT_v_scaled_size = 4; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 5) { + /* Provide 5/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 5L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 5L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 5; + cinfo->min_DCT_v_scaled_size = 5; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 6) { + /* Provide 6/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 6L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 6L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 6; + cinfo->min_DCT_v_scaled_size = 6; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 7) { + /* Provide 7/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 7L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 7L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 7; + cinfo->min_DCT_v_scaled_size = 7; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 8) { + /* Provide 8/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 8L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 8L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 8; + cinfo->min_DCT_v_scaled_size = 8; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 9) { + /* Provide 9/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 9L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 9L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 9; + cinfo->min_DCT_v_scaled_size = 9; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 10) { + /* Provide 10/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 10L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 10L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 10; + cinfo->min_DCT_v_scaled_size = 10; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 11) { + /* Provide 11/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 11L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 11L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 11; + cinfo->min_DCT_v_scaled_size = 11; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 12) { + /* Provide 12/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 12L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 12L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 12; + cinfo->min_DCT_v_scaled_size = 12; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 13) { + /* Provide 13/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 13L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 13L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 13; + cinfo->min_DCT_v_scaled_size = 13; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 14) { + /* Provide 14/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 14L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 14L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 14; + cinfo->min_DCT_v_scaled_size = 14; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 15) { + /* Provide 15/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 15L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 15L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 15; + cinfo->min_DCT_v_scaled_size = 15; + } else { + /* Provide 16/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 16L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 16L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 16; + cinfo->min_DCT_v_scaled_size = 16; + } + + /* Recompute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size; + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size; + } + +#else /* !IDCT_SCALING_SUPPORTED */ + + /* Hardwire it to "no scaling" */ + cinfo->output_width = cinfo->image_width; + cinfo->output_height = cinfo->image_height; + /* jdinput.c has already initialized DCT_scaled_size, + * and has computed unscaled downsampled_width and downsampled_height. + */ + +#endif /* IDCT_SCALING_SUPPORTED */ +} + + +LOCAL(void) +initial_setup (j_decompress_ptr cinfo) +/* Called once, when first SOS marker is reached */ +{ + int ci; + jpeg_component_info *compptr; + + /* Make sure image isn't bigger than I can handle */ + if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Check that number of components won't exceed internal array sizes */ + if (cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + + /* Compute maximum sampling factors; check factor validity */ + cinfo->max_h_samp_factor = 1; + cinfo->max_v_samp_factor = 1; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || + compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) + ERREXIT(cinfo, JERR_BAD_SAMPLING); + cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, + compptr->h_samp_factor); + cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, + compptr->v_samp_factor); + } + + /* Derive block_size, natural_order, and lim_Se */ + if (cinfo->is_baseline || (cinfo->progressive_mode && + cinfo->comps_in_scan)) { /* no pseudo SOS marker */ + cinfo->block_size = DCTSIZE; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + } else + switch (cinfo->Se) { + case (1*1-1): + cinfo->block_size = 1; + cinfo->natural_order = jpeg_natural_order; /* not needed */ + cinfo->lim_Se = cinfo->Se; + break; + case (2*2-1): + cinfo->block_size = 2; + cinfo->natural_order = jpeg_natural_order2; + cinfo->lim_Se = cinfo->Se; + break; + case (3*3-1): + cinfo->block_size = 3; + cinfo->natural_order = jpeg_natural_order3; + cinfo->lim_Se = cinfo->Se; + break; + case (4*4-1): + cinfo->block_size = 4; + cinfo->natural_order = jpeg_natural_order4; + cinfo->lim_Se = cinfo->Se; + break; + case (5*5-1): + cinfo->block_size = 5; + cinfo->natural_order = jpeg_natural_order5; + cinfo->lim_Se = cinfo->Se; + break; + case (6*6-1): + cinfo->block_size = 6; + cinfo->natural_order = jpeg_natural_order6; + cinfo->lim_Se = cinfo->Se; + break; + case (7*7-1): + cinfo->block_size = 7; + cinfo->natural_order = jpeg_natural_order7; + cinfo->lim_Se = cinfo->Se; + break; + case (8*8-1): + cinfo->block_size = 8; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (9*9-1): + cinfo->block_size = 9; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (10*10-1): + cinfo->block_size = 10; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (11*11-1): + cinfo->block_size = 11; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (12*12-1): + cinfo->block_size = 12; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (13*13-1): + cinfo->block_size = 13; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (14*14-1): + cinfo->block_size = 14; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (15*15-1): + cinfo->block_size = 15; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (16*16-1): + cinfo->block_size = 16; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + default: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + break; + } + + /* We initialize DCT_scaled_size and min_DCT_scaled_size to block_size. + * In the full decompressor, + * this will be overridden by jpeg_calc_output_dimensions in jdmaster.c; + * but in the transcoder, + * jpeg_calc_output_dimensions is not used, so we must do it here. + */ + cinfo->min_DCT_h_scaled_size = cinfo->block_size; + cinfo->min_DCT_v_scaled_size = cinfo->block_size; + + /* Compute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->DCT_h_scaled_size = cinfo->block_size; + compptr->DCT_v_scaled_size = cinfo->block_size; + /* Size in DCT blocks */ + compptr->width_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->height_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + /* downsampled_width and downsampled_height will also be overridden by + * jdmaster.c if we are doing full decompression. The transcoder library + * doesn't use these values, but the calling application might. + */ + /* Size in samples */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) cinfo->max_h_samp_factor); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) cinfo->max_v_samp_factor); + /* Mark component needed, until color conversion says otherwise */ + compptr->component_needed = TRUE; + /* Mark no quantization table yet saved for component */ + compptr->quant_table = NULL; + } + + /* Compute number of fully interleaved MCU rows. */ + cinfo->total_iMCU_rows = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + + /* Decide whether file contains multiple scans */ + if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode) + cinfo->inputctl->has_multiple_scans = TRUE; + else + cinfo->inputctl->has_multiple_scans = FALSE; +} + + +LOCAL(void) +per_scan_setup (j_decompress_ptr cinfo) +/* Do computations that are needed before processing a JPEG scan */ +/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */ +{ + int ci, mcublks, tmp; + jpeg_component_info *compptr; + + if (cinfo->comps_in_scan == 1) { + + /* Noninterleaved (single-component) scan */ + compptr = cinfo->cur_comp_info[0]; + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = compptr->width_in_blocks; + cinfo->MCU_rows_in_scan = compptr->height_in_blocks; + + /* For noninterleaved scan, always one block per MCU */ + compptr->MCU_width = 1; + compptr->MCU_height = 1; + compptr->MCU_blocks = 1; + compptr->MCU_sample_width = compptr->DCT_h_scaled_size; + compptr->last_col_width = 1; + /* For noninterleaved scans, it is convenient to define last_row_height + * as the number of block rows present in the last iMCU row. + */ + tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (tmp == 0) tmp = compptr->v_samp_factor; + compptr->last_row_height = tmp; + + /* Prepare array describing MCU composition */ + cinfo->blocks_in_MCU = 1; + cinfo->MCU_membership[0] = 0; + + } else { + + /* Interleaved (multi-component) scan */ + if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, + MAX_COMPS_IN_SCAN); + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + cinfo->MCU_rows_in_scan = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + + cinfo->blocks_in_MCU = 0; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Sampling factors give # of blocks of component in each MCU */ + compptr->MCU_width = compptr->h_samp_factor; + compptr->MCU_height = compptr->v_samp_factor; + compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; + compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size; + /* Figure number of non-dummy blocks in last MCU column & row */ + tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); + if (tmp == 0) tmp = compptr->MCU_width; + compptr->last_col_width = tmp; + tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); + if (tmp == 0) tmp = compptr->MCU_height; + compptr->last_row_height = tmp; + /* Prepare array describing MCU composition */ + mcublks = compptr->MCU_blocks; + if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU) + ERREXIT(cinfo, JERR_BAD_MCU_SIZE); + while (mcublks-- > 0) { + cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; + } + } + + } +} + + +/* + * Save away a copy of the Q-table referenced by each component present + * in the current scan, unless already saved during a prior scan. + * + * In a multiple-scan JPEG file, the encoder could assign different components + * the same Q-table slot number, but change table definitions between scans + * so that each component uses a different Q-table. (The IJG encoder is not + * currently capable of doing this, but other encoders might.) Since we want + * to be able to dequantize all the components at the end of the file, this + * means that we have to save away the table actually used for each component. + * We do this by copying the table at the start of the first scan containing + * the component. + * The JPEG spec prohibits the encoder from changing the contents of a Q-table + * slot between scans of a component using that slot. If the encoder does so + * anyway, this decoder will simply use the Q-table values that were current + * at the start of the first scan for the component. + * + * The decompressor output side looks only at the saved quant tables, + * not at the current Q-table slots. + */ + +LOCAL(void) +latch_quant_tables (j_decompress_ptr cinfo) +{ + int ci, qtblno; + jpeg_component_info *compptr; + JQUANT_TBL * qtbl; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* No work if we already saved Q-table for this component */ + if (compptr->quant_table != NULL) + continue; + /* Make sure specified quantization table is present */ + qtblno = compptr->quant_tbl_no; + if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || + cinfo->quant_tbl_ptrs[qtblno] == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); + /* OK, save away the quantization table */ + qtbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(JQUANT_TBL)); + MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL)); + compptr->quant_table = qtbl; + } +} + + +/* + * Initialize the input modules to read a scan of compressed data. + * The first call to this is done by jdmaster.c after initializing + * the entire decompressor (during jpeg_start_decompress). + * Subsequent calls come from consume_markers, below. + */ + +METHODDEF(void) +start_input_pass (j_decompress_ptr cinfo) +{ + per_scan_setup(cinfo); + latch_quant_tables(cinfo); + (*cinfo->entropy->start_pass) (cinfo); + (*cinfo->coef->start_input_pass) (cinfo); + cinfo->inputctl->consume_input = cinfo->coef->consume_data; +} + + +/* + * Finish up after inputting a compressed-data scan. + * This is called by the coefficient controller after it's read all + * the expected data of the scan. + */ + +METHODDEF(void) +finish_input_pass (j_decompress_ptr cinfo) +{ + cinfo->inputctl->consume_input = consume_markers; +} + + +/* + * Read JPEG markers before, between, or after compressed-data scans. + * Change state as necessary when a new scan is reached. + * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + * + * The consume_input method pointer points either here or to the + * coefficient controller's consume_data routine, depending on whether + * we are reading a compressed data segment or inter-segment markers. + * + * Note: This function should NOT return a pseudo SOS marker (with zero + * component number) to the caller. A pseudo marker received by + * read_markers is processed and then skipped for other markers. + */ + +METHODDEF(int) +consume_markers (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + int val; + + if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */ + return JPEG_REACHED_EOI; + + for (;;) { /* Loop to pass pseudo SOS marker */ + val = (*cinfo->marker->read_markers) (cinfo); + + switch (val) { + case JPEG_REACHED_SOS: /* Found SOS */ + if (inputctl->inheaders) { /* 1st SOS */ + if (inputctl->inheaders == 1) + initial_setup(cinfo); + if (cinfo->comps_in_scan == 0) { /* pseudo SOS marker */ + inputctl->inheaders = 2; + break; + } + inputctl->inheaders = 0; + /* Note: start_input_pass must be called by jdmaster.c + * before any more input can be consumed. jdapimin.c is + * responsible for enforcing this sequencing. + */ + } else { /* 2nd or later SOS marker */ + if (! inputctl->pub.has_multiple_scans) + ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */ + if (cinfo->comps_in_scan == 0) /* unexpected pseudo SOS marker */ + break; + start_input_pass(cinfo); + } + return val; + case JPEG_REACHED_EOI: /* Found EOI */ + inputctl->pub.eoi_reached = TRUE; + if (inputctl->inheaders) { /* Tables-only datastream, apparently */ + if (cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOF_NO_SOS); + } else { + /* Prevent infinite loop in coef ctlr's decompress_data routine + * if user set output_scan_number larger than number of scans. + */ + if (cinfo->output_scan_number > cinfo->input_scan_number) + cinfo->output_scan_number = cinfo->input_scan_number; + } + return val; + case JPEG_SUSPENDED: + return val; + default: + return val; + } + } +} + + +/* + * Reset state to begin a fresh datastream. + */ + +METHODDEF(void) +reset_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + + inputctl->pub.consume_input = consume_markers; + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = 1; + /* Reset other modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->marker->reset_marker_reader) (cinfo); + /* Reset progression state -- would be cleaner if entropy decoder did this */ + cinfo->coef_bits = NULL; +} + + +/* + * Initialize the input controller module. + * This is called only once, when the decompression object is created. + */ + +GLOBAL(void) +jinit_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl; + + /* Create subobject in permanent pool */ + inputctl = (my_inputctl_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_input_controller)); + cinfo->inputctl = (struct jpeg_input_controller *) inputctl; + /* Initialize method pointers */ + inputctl->pub.consume_input = consume_markers; + inputctl->pub.reset_input_controller = reset_input_controller; + inputctl->pub.start_input_pass = start_input_pass; + inputctl->pub.finish_input_pass = finish_input_pass; + /* Initialize state: can't use reset_input_controller since we don't + * want to try to reset other modules yet. + */ + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = 1; +} diff --git a/src/SDL2/external/jpeg-9/jdmainct.c b/src/SDL2/external/jpeg-9/jdmainct.c new file mode 100644 index 000000000..52091fb2b --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdmainct.c @@ -0,0 +1,513 @@ +/* + * jdmainct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2002-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the main buffer controller for decompression. + * The main buffer lies between the JPEG decompressor proper and the + * post-processor; it holds downsampled data in the JPEG colorspace. + * + * Note that this code is bypassed in raw-data mode, since the application + * supplies the equivalent of the main buffer in that case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * In the current system design, the main buffer need never be a full-image + * buffer; any full-height buffers will be found inside the coefficient or + * postprocessing controllers. Nonetheless, the main controller is not + * trivial. Its responsibility is to provide context rows for upsampling/ + * rescaling, and doing this in an efficient fashion is a bit tricky. + * + * Postprocessor input data is counted in "row groups". A row group + * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) + * sample rows of each component. (We require DCT_scaled_size values to be + * chosen such that these numbers are integers. In practice DCT_scaled_size + * values will likely be powers of two, so we actually have the stronger + * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.) + * Upsampling will typically produce max_v_samp_factor pixel rows from each + * row group (times any additional scale factor that the upsampler is + * applying). + * + * The coefficient controller will deliver data to us one iMCU row at a time; + * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or + * exactly min_DCT_scaled_size row groups. (This amount of data corresponds + * to one row of MCUs when the image is fully interleaved.) Note that the + * number of sample rows varies across components, but the number of row + * groups does not. Some garbage sample rows may be included in the last iMCU + * row at the bottom of the image. + * + * Depending on the vertical scaling algorithm used, the upsampler may need + * access to the sample row(s) above and below its current input row group. + * The upsampler is required to set need_context_rows TRUE at global selection + * time if so. When need_context_rows is FALSE, this controller can simply + * obtain one iMCU row at a time from the coefficient controller and dole it + * out as row groups to the postprocessor. + * + * When need_context_rows is TRUE, this controller guarantees that the buffer + * passed to postprocessing contains at least one row group's worth of samples + * above and below the row group(s) being processed. Note that the context + * rows "above" the first passed row group appear at negative row offsets in + * the passed buffer. At the top and bottom of the image, the required + * context rows are manufactured by duplicating the first or last real sample + * row; this avoids having special cases in the upsampling inner loops. + * + * The amount of context is fixed at one row group just because that's a + * convenient number for this controller to work with. The existing + * upsamplers really only need one sample row of context. An upsampler + * supporting arbitrary output rescaling might wish for more than one row + * group of context when shrinking the image; tough, we don't handle that. + * (This is justified by the assumption that downsizing will be handled mostly + * by adjusting the DCT_scaled_size values, so that the actual scale factor at + * the upsample step needn't be much less than one.) + * + * To provide the desired context, we have to retain the last two row groups + * of one iMCU row while reading in the next iMCU row. (The last row group + * can't be processed until we have another row group for its below-context, + * and so we have to save the next-to-last group too for its above-context.) + * We could do this most simply by copying data around in our buffer, but + * that'd be very slow. We can avoid copying any data by creating a rather + * strange pointer structure. Here's how it works. We allocate a workspace + * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number + * of row groups per iMCU row). We create two sets of redundant pointers to + * the workspace. Labeling the physical row groups 0 to M+1, the synthesized + * pointer lists look like this: + * M+1 M-1 + * master pointer --> 0 master pointer --> 0 + * 1 1 + * ... ... + * M-3 M-3 + * M-2 M + * M-1 M+1 + * M M-2 + * M+1 M-1 + * 0 0 + * We read alternate iMCU rows using each master pointer; thus the last two + * row groups of the previous iMCU row remain un-overwritten in the workspace. + * The pointer lists are set up so that the required context rows appear to + * be adjacent to the proper places when we pass the pointer lists to the + * upsampler. + * + * The above pictures describe the normal state of the pointer lists. + * At top and bottom of the image, we diddle the pointer lists to duplicate + * the first or last sample row as necessary (this is cheaper than copying + * sample rows around). + * + * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1. In that + * situation each iMCU row provides only one row group so the buffering logic + * must be different (eg, we must read two iMCU rows before we can emit the + * first row group). For now, we simply do not support providing context + * rows when min_DCT_scaled_size is 1. That combination seems unlikely to + * be worth providing --- if someone wants a 1/8th-size preview, they probably + * want it quick and dirty, so a context-free upsampler is sufficient. + */ + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_main_controller pub; /* public fields */ + + /* Pointer to allocated workspace (M or M+2 row groups). */ + JSAMPARRAY buffer[MAX_COMPONENTS]; + + boolean buffer_full; /* Have we gotten an iMCU row from decoder? */ + JDIMENSION rowgroup_ctr; /* counts row groups output to postprocessor */ + + /* Remaining fields are only used in the context case. */ + + /* These are the master pointers to the funny-order pointer lists. */ + JSAMPIMAGE xbuffer[2]; /* pointers to weird pointer lists */ + + int whichptr; /* indicates which pointer set is now in use */ + int context_state; /* process_data state machine status */ + JDIMENSION rowgroups_avail; /* row groups available to postprocessor */ + JDIMENSION iMCU_row_ctr; /* counts iMCU rows to detect image top/bot */ +} my_main_controller; + +typedef my_main_controller * my_main_ptr; + +/* context_state values: */ +#define CTX_PREPARE_FOR_IMCU 0 /* need to prepare for MCU row */ +#define CTX_PROCESS_IMCU 1 /* feeding iMCU to postprocessor */ +#define CTX_POSTPONED_ROW 2 /* feeding postponed row group */ + + +/* Forward declarations */ +METHODDEF(void) process_data_simple_main + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +METHODDEF(void) process_data_context_main + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +#ifdef QUANT_2PASS_SUPPORTED +METHODDEF(void) process_data_crank_post + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +#endif + + +LOCAL(void) +alloc_funny_pointers (j_decompress_ptr cinfo) +/* Allocate space for the funny pointer lists. + * This is done only once, not once per pass. + */ +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + int ci, rgroup; + int M = cinfo->min_DCT_v_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY xbuf; + + /* Get top-level space for component array pointers. + * We alloc both arrays with one call to save a few cycles. + */ + mainp->xbuffer[0] = (JSAMPIMAGE) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * 2 * SIZEOF(JSAMPARRAY)); + mainp->xbuffer[1] = mainp->xbuffer[0] + cinfo->num_components; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + /* Get space for pointer lists --- M+4 row groups in each list. + * We alloc both pointer lists with one call to save a few cycles. + */ + xbuf = (JSAMPARRAY) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW)); + xbuf += rgroup; /* want one row group at negative offsets */ + mainp->xbuffer[0][ci] = xbuf; + xbuf += rgroup * (M + 4); + mainp->xbuffer[1][ci] = xbuf; + } +} + + +LOCAL(void) +make_funny_pointers (j_decompress_ptr cinfo) +/* Create the funny pointer lists discussed in the comments above. + * The actual workspace is already allocated (in main->buffer), + * and the space for the pointer lists is allocated too. + * This routine just fills in the curiously ordered lists. + * This will be repeated at the beginning of each pass. + */ +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + int ci, i, rgroup; + int M = cinfo->min_DCT_v_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY buf, xbuf0, xbuf1; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + xbuf0 = mainp->xbuffer[0][ci]; + xbuf1 = mainp->xbuffer[1][ci]; + /* First copy the workspace pointers as-is */ + buf = mainp->buffer[ci]; + for (i = 0; i < rgroup * (M + 2); i++) { + xbuf0[i] = xbuf1[i] = buf[i]; + } + /* In the second list, put the last four row groups in swapped order */ + for (i = 0; i < rgroup * 2; i++) { + xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i]; + xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i]; + } + /* The wraparound pointers at top and bottom will be filled later + * (see set_wraparound_pointers, below). Initially we want the "above" + * pointers to duplicate the first actual data line. This only needs + * to happen in xbuffer[0]. + */ + for (i = 0; i < rgroup; i++) { + xbuf0[i - rgroup] = xbuf0[0]; + } + } +} + + +LOCAL(void) +set_wraparound_pointers (j_decompress_ptr cinfo) +/* Set up the "wraparound" pointers at top and bottom of the pointer lists. + * This changes the pointer list state from top-of-image to the normal state. + */ +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + int ci, i, rgroup; + int M = cinfo->min_DCT_v_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY xbuf0, xbuf1; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + xbuf0 = mainp->xbuffer[0][ci]; + xbuf1 = mainp->xbuffer[1][ci]; + for (i = 0; i < rgroup; i++) { + xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i]; + xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i]; + xbuf0[rgroup*(M+2) + i] = xbuf0[i]; + xbuf1[rgroup*(M+2) + i] = xbuf1[i]; + } + } +} + + +LOCAL(void) +set_bottom_pointers (j_decompress_ptr cinfo) +/* Change the pointer lists to duplicate the last sample row at the bottom + * of the image. whichptr indicates which xbuffer holds the final iMCU row. + * Also sets rowgroups_avail to indicate number of nondummy row groups in row. + */ +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + int ci, i, rgroup, iMCUheight, rows_left; + jpeg_component_info *compptr; + JSAMPARRAY xbuf; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Count sample rows in one iMCU row and in one row group */ + iMCUheight = compptr->v_samp_factor * compptr->DCT_v_scaled_size; + rgroup = iMCUheight / cinfo->min_DCT_v_scaled_size; + /* Count nondummy sample rows remaining for this component */ + rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight); + if (rows_left == 0) rows_left = iMCUheight; + /* Count nondummy row groups. Should get same answer for each component, + * so we need only do it once. + */ + if (ci == 0) { + mainp->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1); + } + /* Duplicate the last real sample row rgroup*2 times; this pads out the + * last partial rowgroup and ensures at least one full rowgroup of context. + */ + xbuf = mainp->xbuffer[mainp->whichptr][ci]; + for (i = 0; i < rgroup * 2; i++) { + xbuf[rows_left + i] = xbuf[rows_left-1]; + } + } +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (cinfo->upsample->need_context_rows) { + mainp->pub.process_data = process_data_context_main; + make_funny_pointers(cinfo); /* Create the xbuffer[] lists */ + mainp->whichptr = 0; /* Read first iMCU row into xbuffer[0] */ + mainp->context_state = CTX_PREPARE_FOR_IMCU; + mainp->iMCU_row_ctr = 0; + } else { + /* Simple case with no context needed */ + mainp->pub.process_data = process_data_simple_main; + } + mainp->buffer_full = FALSE; /* Mark buffer empty */ + mainp->rowgroup_ctr = 0; + break; +#ifdef QUANT_2PASS_SUPPORTED + case JBUF_CRANK_DEST: + /* For last pass of 2-pass quantization, just crank the postprocessor */ + mainp->pub.process_data = process_data_crank_post; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data. + * This handles the simple case where no context is required. + */ + +METHODDEF(void) +process_data_simple_main (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + JDIMENSION rowgroups_avail; + + /* Read input data if we haven't filled the main buffer yet */ + if (! mainp->buffer_full) { + if (! (*cinfo->coef->decompress_data) (cinfo, mainp->buffer)) + return; /* suspension forced, can do nothing more */ + mainp->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + } + + /* There are always min_DCT_scaled_size row groups in an iMCU row. */ + rowgroups_avail = (JDIMENSION) cinfo->min_DCT_v_scaled_size; + /* Note: at the bottom of the image, we may pass extra garbage row groups + * to the postprocessor. The postprocessor has to check for bottom + * of image anyway (at row resolution), so no point in us doing it too. + */ + + /* Feed the postprocessor */ + (*cinfo->post->post_process_data) (cinfo, mainp->buffer, + &mainp->rowgroup_ctr, rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + + /* Has postprocessor consumed all the data yet? If so, mark buffer empty */ + if (mainp->rowgroup_ctr >= rowgroups_avail) { + mainp->buffer_full = FALSE; + mainp->rowgroup_ctr = 0; + } +} + + +/* + * Process some data. + * This handles the case where context rows must be provided. + */ + +METHODDEF(void) +process_data_context_main (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + + /* Read input data if we haven't filled the main buffer yet */ + if (! mainp->buffer_full) { + if (! (*cinfo->coef->decompress_data) (cinfo, + mainp->xbuffer[mainp->whichptr])) + return; /* suspension forced, can do nothing more */ + mainp->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + mainp->iMCU_row_ctr++; /* count rows received */ + } + + /* Postprocessor typically will not swallow all the input data it is handed + * in one call (due to filling the output buffer first). Must be prepared + * to exit and restart. This switch lets us keep track of how far we got. + * Note that each case falls through to the next on successful completion. + */ + switch (mainp->context_state) { + case CTX_POSTPONED_ROW: + /* Call postprocessor using previously set pointers for postponed row */ + (*cinfo->post->post_process_data) (cinfo, mainp->xbuffer[mainp->whichptr], + &mainp->rowgroup_ctr, mainp->rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + if (mainp->rowgroup_ctr < mainp->rowgroups_avail) + return; /* Need to suspend */ + mainp->context_state = CTX_PREPARE_FOR_IMCU; + if (*out_row_ctr >= out_rows_avail) + return; /* Postprocessor exactly filled output buf */ + /*FALLTHROUGH*/ + case CTX_PREPARE_FOR_IMCU: + /* Prepare to process first M-1 row groups of this iMCU row */ + mainp->rowgroup_ctr = 0; + mainp->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size - 1); + /* Check for bottom of image: if so, tweak pointers to "duplicate" + * the last sample row, and adjust rowgroups_avail to ignore padding rows. + */ + if (mainp->iMCU_row_ctr == cinfo->total_iMCU_rows) + set_bottom_pointers(cinfo); + mainp->context_state = CTX_PROCESS_IMCU; + /*FALLTHROUGH*/ + case CTX_PROCESS_IMCU: + /* Call postprocessor using previously set pointers */ + (*cinfo->post->post_process_data) (cinfo, mainp->xbuffer[mainp->whichptr], + &mainp->rowgroup_ctr, mainp->rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + if (mainp->rowgroup_ctr < mainp->rowgroups_avail) + return; /* Need to suspend */ + /* After the first iMCU, change wraparound pointers to normal state */ + if (mainp->iMCU_row_ctr == 1) + set_wraparound_pointers(cinfo); + /* Prepare to load new iMCU row using other xbuffer list */ + mainp->whichptr ^= 1; /* 0=>1 or 1=>0 */ + mainp->buffer_full = FALSE; + /* Still need to process last row group of this iMCU row, */ + /* which is saved at index M+1 of the other xbuffer */ + mainp->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 1); + mainp->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 2); + mainp->context_state = CTX_POSTPONED_ROW; + } +} + + +/* + * Process some data. + * Final pass of two-pass quantization: just call the postprocessor. + * Source data will be the postprocessor controller's internal buffer. + */ + +#ifdef QUANT_2PASS_SUPPORTED + +METHODDEF(void) +process_data_crank_post (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL, + (JDIMENSION *) NULL, (JDIMENSION) 0, + output_buf, out_row_ctr, out_rows_avail); +} + +#endif /* QUANT_2PASS_SUPPORTED */ + + +/* + * Initialize main buffer controller. + */ + +GLOBAL(void) +jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_main_ptr mainp; + int ci, rgroup, ngroups; + jpeg_component_info *compptr; + + mainp = (my_main_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_main_controller)); + cinfo->main = &mainp->pub; + mainp->pub.start_pass = start_pass_main; + + if (need_full_buffer) /* shouldn't happen */ + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + /* Allocate the workspace. + * ngroups is the number of row groups we need. + */ + if (cinfo->upsample->need_context_rows) { + if (cinfo->min_DCT_v_scaled_size < 2) /* unsupported, see comments above */ + ERREXIT(cinfo, JERR_NOTIMPL); + alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */ + ngroups = cinfo->min_DCT_v_scaled_size + 2; + } else { + ngroups = cinfo->min_DCT_v_scaled_size; + } + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + mainp->buffer[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size), + (JDIMENSION) (rgroup * ngroups)); + } +} diff --git a/src/SDL2/external/jpeg-9/jdmarker.c b/src/SDL2/external/jpeg-9/jdmarker.c new file mode 100644 index 000000000..ce8b713c5 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdmarker.c @@ -0,0 +1,1505 @@ +/* + * jdmarker.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2009-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to decode JPEG datastream markers. + * Most of the complexity arises from our desire to support input + * suspension: if not all of the data for a marker is available, + * we must exit back to the application. On resumption, we reprocess + * the marker. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +typedef enum { /* JPEG marker codes */ + M_SOF0 = 0xc0, + M_SOF1 = 0xc1, + M_SOF2 = 0xc2, + M_SOF3 = 0xc3, + + M_SOF5 = 0xc5, + M_SOF6 = 0xc6, + M_SOF7 = 0xc7, + + M_JPG = 0xc8, + M_SOF9 = 0xc9, + M_SOF10 = 0xca, + M_SOF11 = 0xcb, + + M_SOF13 = 0xcd, + M_SOF14 = 0xce, + M_SOF15 = 0xcf, + + M_DHT = 0xc4, + + M_DAC = 0xcc, + + M_RST0 = 0xd0, + M_RST1 = 0xd1, + M_RST2 = 0xd2, + M_RST3 = 0xd3, + M_RST4 = 0xd4, + M_RST5 = 0xd5, + M_RST6 = 0xd6, + M_RST7 = 0xd7, + + M_SOI = 0xd8, + M_EOI = 0xd9, + M_SOS = 0xda, + M_DQT = 0xdb, + M_DNL = 0xdc, + M_DRI = 0xdd, + M_DHP = 0xde, + M_EXP = 0xdf, + + M_APP0 = 0xe0, + M_APP1 = 0xe1, + M_APP2 = 0xe2, + M_APP3 = 0xe3, + M_APP4 = 0xe4, + M_APP5 = 0xe5, + M_APP6 = 0xe6, + M_APP7 = 0xe7, + M_APP8 = 0xe8, + M_APP9 = 0xe9, + M_APP10 = 0xea, + M_APP11 = 0xeb, + M_APP12 = 0xec, + M_APP13 = 0xed, + M_APP14 = 0xee, + M_APP15 = 0xef, + + M_JPG0 = 0xf0, + M_JPG8 = 0xf8, + M_JPG13 = 0xfd, + M_COM = 0xfe, + + M_TEM = 0x01, + + M_ERROR = 0x100 +} JPEG_MARKER; + + +/* Private state */ + +typedef struct { + struct jpeg_marker_reader pub; /* public fields */ + + /* Application-overridable marker processing methods */ + jpeg_marker_parser_method process_COM; + jpeg_marker_parser_method process_APPn[16]; + + /* Limit on marker data length to save for each marker type */ + unsigned int length_limit_COM; + unsigned int length_limit_APPn[16]; + + /* Status of COM/APPn marker saving */ + jpeg_saved_marker_ptr cur_marker; /* NULL if not processing a marker */ + unsigned int bytes_read; /* data bytes read so far in marker */ + /* Note: cur_marker is not linked into marker_list until it's all read. */ +} my_marker_reader; + +typedef my_marker_reader * my_marker_ptr; + + +/* + * Macros for fetching data from the data source module. + * + * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect + * the current restart point; we update them only when we have reached a + * suitable place to restart if a suspension occurs. + */ + +/* Declare and initialize local copies of input pointer/count */ +#define INPUT_VARS(cinfo) \ + struct jpeg_source_mgr * datasrc = (cinfo)->src; \ + const JOCTET * next_input_byte = datasrc->next_input_byte; \ + size_t bytes_in_buffer = datasrc->bytes_in_buffer + +/* Unload the local copies --- do this only at a restart boundary */ +#define INPUT_SYNC(cinfo) \ + ( datasrc->next_input_byte = next_input_byte, \ + datasrc->bytes_in_buffer = bytes_in_buffer ) + +/* Reload the local copies --- used only in MAKE_BYTE_AVAIL */ +#define INPUT_RELOAD(cinfo) \ + ( next_input_byte = datasrc->next_input_byte, \ + bytes_in_buffer = datasrc->bytes_in_buffer ) + +/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available. + * Note we do *not* do INPUT_SYNC before calling fill_input_buffer, + * but we must reload the local copies after a successful fill. + */ +#define MAKE_BYTE_AVAIL(cinfo,action) \ + if (bytes_in_buffer == 0) { \ + if (! (*datasrc->fill_input_buffer) (cinfo)) \ + { action; } \ + INPUT_RELOAD(cinfo); \ + } + +/* Read a byte into variable V. + * If must suspend, take the specified action (typically "return FALSE"). + */ +#define INPUT_BYTE(cinfo,V,action) \ + MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V = GETJOCTET(*next_input_byte++); ) + +/* As above, but read two bytes interpreted as an unsigned 16-bit integer. + * V should be declared unsigned int or perhaps INT32. + */ +#define INPUT_2BYTES(cinfo,V,action) \ + MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \ + MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V += GETJOCTET(*next_input_byte++); ) + + +/* + * Routines to process JPEG markers. + * + * Entry condition: JPEG marker itself has been read and its code saved + * in cinfo->unread_marker; input restart point is just after the marker. + * + * Exit: if return TRUE, have read and processed any parameters, and have + * updated the restart point to point after the parameters. + * If return FALSE, was forced to suspend before reaching end of + * marker parameters; restart point has not been moved. Same routine + * will be called again after application supplies more input data. + * + * This approach to suspension assumes that all of a marker's parameters + * can fit into a single input bufferload. This should hold for "normal" + * markers. Some COM/APPn markers might have large parameter segments + * that might not fit. If we are simply dropping such a marker, we use + * skip_input_data to get past it, and thereby put the problem on the + * source manager's shoulders. If we are saving the marker's contents + * into memory, we use a slightly different convention: when forced to + * suspend, the marker processor updates the restart point to the end of + * what it's consumed (ie, the end of the buffer) before returning FALSE. + * On resumption, cinfo->unread_marker still contains the marker code, + * but the data source will point to the next chunk of marker data. + * The marker processor must retain internal state to deal with this. + * + * Note that we don't bother to avoid duplicate trace messages if a + * suspension occurs within marker parameters. Other side effects + * require more care. + */ + + +LOCAL(boolean) +get_soi (j_decompress_ptr cinfo) +/* Process an SOI marker */ +{ + int i; + + TRACEMS(cinfo, 1, JTRC_SOI); + + if (cinfo->marker->saw_SOI) + ERREXIT(cinfo, JERR_SOI_DUPLICATE); + + /* Reset all parameters that are defined to be reset by SOI */ + + for (i = 0; i < NUM_ARITH_TBLS; i++) { + cinfo->arith_dc_L[i] = 0; + cinfo->arith_dc_U[i] = 1; + cinfo->arith_ac_K[i] = 5; + } + cinfo->restart_interval = 0; + + /* Set initial assumptions for colorspace etc */ + + cinfo->jpeg_color_space = JCS_UNKNOWN; + cinfo->color_transform = JCT_NONE; + cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */ + + cinfo->saw_JFIF_marker = FALSE; + cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */ + cinfo->JFIF_minor_version = 1; + cinfo->density_unit = 0; + cinfo->X_density = 1; + cinfo->Y_density = 1; + cinfo->saw_Adobe_marker = FALSE; + cinfo->Adobe_transform = 0; + + cinfo->marker->saw_SOI = TRUE; + + return TRUE; +} + + +LOCAL(boolean) +get_sof (j_decompress_ptr cinfo, boolean is_baseline, boolean is_prog, + boolean is_arith) +/* Process a SOFn marker */ +{ + INT32 length; + int c, ci, i; + jpeg_component_info * compptr; + INPUT_VARS(cinfo); + + cinfo->is_baseline = is_baseline; + cinfo->progressive_mode = is_prog; + cinfo->arith_code = is_arith; + + INPUT_2BYTES(cinfo, length, return FALSE); + + INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE); + INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE); + INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE); + INPUT_BYTE(cinfo, cinfo->num_components, return FALSE); + + length -= 8; + + TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker, + (int) cinfo->image_width, (int) cinfo->image_height, + cinfo->num_components); + + if (cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOF_DUPLICATE); + + /* We don't support files in which the image height is initially specified */ + /* as 0 and is later redefined by DNL. As long as we have to check that, */ + /* might as well have a general sanity check. */ + if (cinfo->image_height <= 0 || cinfo->image_width <= 0 + || cinfo->num_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + if (length != (cinfo->num_components * 3)) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + if (cinfo->comp_info == NULL) /* do only once, even if suspend */ + cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * SIZEOF(jpeg_component_info)); + + for (ci = 0; ci < cinfo->num_components; ci++) { + INPUT_BYTE(cinfo, c, return FALSE); + /* Check to see whether component id has already been seen */ + /* (in violation of the spec, but unfortunately seen in some */ + /* files). If so, create "fake" component id equal to the */ + /* max id seen so far + 1. */ + for (i = 0, compptr = cinfo->comp_info; i < ci; i++, compptr++) { + if (c == compptr->component_id) { + compptr = cinfo->comp_info; + c = compptr->component_id; + compptr++; + for (i = 1; i < ci; i++, compptr++) { + if (compptr->component_id > c) c = compptr->component_id; + } + c++; + break; + } + } + compptr->component_id = c; + compptr->component_index = ci; + INPUT_BYTE(cinfo, c, return FALSE); + compptr->h_samp_factor = (c >> 4) & 15; + compptr->v_samp_factor = (c ) & 15; + INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE); + + TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT, + compptr->component_id, compptr->h_samp_factor, + compptr->v_samp_factor, compptr->quant_tbl_no); + } + + cinfo->marker->saw_SOF = TRUE; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_sos (j_decompress_ptr cinfo) +/* Process a SOS marker */ +{ + INT32 length; + int c, ci, i, n; + jpeg_component_info * compptr; + INPUT_VARS(cinfo); + + if (! cinfo->marker->saw_SOF) + ERREXITS(cinfo, JERR_SOF_BEFORE, "SOS"); + + INPUT_2BYTES(cinfo, length, return FALSE); + + INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */ + + TRACEMS1(cinfo, 1, JTRC_SOS, n); + + if (length != (n * 2 + 6) || n > MAX_COMPS_IN_SCAN || + (n == 0 && !cinfo->progressive_mode)) + /* pseudo SOS marker only allowed in progressive mode */ + ERREXIT(cinfo, JERR_BAD_LENGTH); + + cinfo->comps_in_scan = n; + + /* Collect the component-spec parameters */ + + for (i = 0; i < n; i++) { + INPUT_BYTE(cinfo, c, return FALSE); + + /* Detect the case where component id's are not unique, and, if so, */ + /* create a fake component id using the same logic as in get_sof. */ + for (ci = 0; ci < i; ci++) { + if (c == cinfo->cur_comp_info[ci]->component_id) { + c = cinfo->cur_comp_info[0]->component_id; + for (ci = 1; ci < i; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (compptr->component_id > c) c = compptr->component_id; + } + c++; + break; + } + } + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (c == compptr->component_id) + goto id_found; + } + + ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, c); + + id_found: + + cinfo->cur_comp_info[i] = compptr; + INPUT_BYTE(cinfo, c, return FALSE); + compptr->dc_tbl_no = (c >> 4) & 15; + compptr->ac_tbl_no = (c ) & 15; + + TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, compptr->component_id, + compptr->dc_tbl_no, compptr->ac_tbl_no); + } + + /* Collect the additional scan parameters Ss, Se, Ah/Al. */ + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Ss = c; + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Se = c; + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Ah = (c >> 4) & 15; + cinfo->Al = (c ) & 15; + + TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se, + cinfo->Ah, cinfo->Al); + + /* Prepare to scan data & restart markers */ + cinfo->marker->next_restart_num = 0; + + /* Count another (non-pseudo) SOS marker */ + if (n) cinfo->input_scan_number++; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +#ifdef D_ARITH_CODING_SUPPORTED + +LOCAL(boolean) +get_dac (j_decompress_ptr cinfo) +/* Process a DAC marker */ +{ + INT32 length; + int index, val; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 0) { + INPUT_BYTE(cinfo, index, return FALSE); + INPUT_BYTE(cinfo, val, return FALSE); + + length -= 2; + + TRACEMS2(cinfo, 1, JTRC_DAC, index, val); + + if (index < 0 || index >= (2*NUM_ARITH_TBLS)) + ERREXIT1(cinfo, JERR_DAC_INDEX, index); + + if (index >= NUM_ARITH_TBLS) { /* define AC table */ + cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val; + } else { /* define DC table */ + cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F); + cinfo->arith_dc_U[index] = (UINT8) (val >> 4); + if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index]) + ERREXIT1(cinfo, JERR_DAC_VALUE, val); + } + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + +#else /* ! D_ARITH_CODING_SUPPORTED */ + +#define get_dac(cinfo) skip_variable(cinfo) + +#endif /* D_ARITH_CODING_SUPPORTED */ + + +LOCAL(boolean) +get_dht (j_decompress_ptr cinfo) +/* Process a DHT marker */ +{ + INT32 length; + UINT8 bits[17]; + UINT8 huffval[256]; + int i, index, count; + JHUFF_TBL **htblptr; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 16) { + INPUT_BYTE(cinfo, index, return FALSE); + + TRACEMS1(cinfo, 1, JTRC_DHT, index); + + bits[0] = 0; + count = 0; + for (i = 1; i <= 16; i++) { + INPUT_BYTE(cinfo, bits[i], return FALSE); + count += bits[i]; + } + + length -= 1 + 16; + + TRACEMS8(cinfo, 2, JTRC_HUFFBITS, + bits[1], bits[2], bits[3], bits[4], + bits[5], bits[6], bits[7], bits[8]); + TRACEMS8(cinfo, 2, JTRC_HUFFBITS, + bits[9], bits[10], bits[11], bits[12], + bits[13], bits[14], bits[15], bits[16]); + + /* Here we just do minimal validation of the counts to avoid walking + * off the end of our table space. jdhuff.c will check more carefully. + */ + if (count > 256 || ((INT32) count) > length) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + + for (i = 0; i < count; i++) + INPUT_BYTE(cinfo, huffval[i], return FALSE); + + length -= count; + + if (index & 0x10) { /* AC table definition */ + index -= 0x10; + htblptr = &cinfo->ac_huff_tbl_ptrs[index]; + } else { /* DC table definition */ + htblptr = &cinfo->dc_huff_tbl_ptrs[index]; + } + + if (index < 0 || index >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_DHT_INDEX, index); + + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + + MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); + MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval)); + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_dqt (j_decompress_ptr cinfo) +/* Process a DQT marker */ +{ + INT32 length, count, i; + int n, prec; + unsigned int tmp; + JQUANT_TBL *quant_ptr; + const int *natural_order; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 0) { + length--; + INPUT_BYTE(cinfo, n, return FALSE); + prec = n >> 4; + n &= 0x0F; + + TRACEMS2(cinfo, 1, JTRC_DQT, n, prec); + + if (n >= NUM_QUANT_TBLS) + ERREXIT1(cinfo, JERR_DQT_INDEX, n); + + if (cinfo->quant_tbl_ptrs[n] == NULL) + cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo); + quant_ptr = cinfo->quant_tbl_ptrs[n]; + + if (prec) { + if (length < DCTSIZE2 * 2) { + /* Initialize full table for safety. */ + for (i = 0; i < DCTSIZE2; i++) { + quant_ptr->quantval[i] = 1; + } + count = length >> 1; + } else + count = DCTSIZE2; + } else { + if (length < DCTSIZE2) { + /* Initialize full table for safety. */ + for (i = 0; i < DCTSIZE2; i++) { + quant_ptr->quantval[i] = 1; + } + count = length; + } else + count = DCTSIZE2; + } + + switch (count) { + case (2*2): natural_order = jpeg_natural_order2; break; + case (3*3): natural_order = jpeg_natural_order3; break; + case (4*4): natural_order = jpeg_natural_order4; break; + case (5*5): natural_order = jpeg_natural_order5; break; + case (6*6): natural_order = jpeg_natural_order6; break; + case (7*7): natural_order = jpeg_natural_order7; break; + default: natural_order = jpeg_natural_order; break; + } + + for (i = 0; i < count; i++) { + if (prec) + INPUT_2BYTES(cinfo, tmp, return FALSE); + else + INPUT_BYTE(cinfo, tmp, return FALSE); + /* We convert the zigzag-order table to natural array order. */ + quant_ptr->quantval[natural_order[i]] = (UINT16) tmp; + } + + if (cinfo->err->trace_level >= 2) { + for (i = 0; i < DCTSIZE2; i += 8) { + TRACEMS8(cinfo, 2, JTRC_QUANTVALS, + quant_ptr->quantval[i], quant_ptr->quantval[i+1], + quant_ptr->quantval[i+2], quant_ptr->quantval[i+3], + quant_ptr->quantval[i+4], quant_ptr->quantval[i+5], + quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]); + } + } + + length -= count; + if (prec) length -= count; + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_dri (j_decompress_ptr cinfo) +/* Process a DRI marker */ +{ + INT32 length; + unsigned int tmp; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + + if (length != 4) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_2BYTES(cinfo, tmp, return FALSE); + + TRACEMS1(cinfo, 1, JTRC_DRI, tmp); + + cinfo->restart_interval = tmp; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_lse (j_decompress_ptr cinfo) +/* Process an LSE marker */ +{ + INT32 length; + unsigned int tmp; + int cid; + INPUT_VARS(cinfo); + + if (! cinfo->marker->saw_SOF) + ERREXITS(cinfo, JERR_SOF_BEFORE, "LSE"); + + if (cinfo->num_components < 3) goto bad; + + INPUT_2BYTES(cinfo, length, return FALSE); + + if (length != 24) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0x0D) /* ID inverse transform specification */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != MAXJSAMPLE) goto bad; /* MAXTRANS */ + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 3) goto bad; /* Nt=3 */ + INPUT_BYTE(cinfo, cid, return FALSE); + if (cid != cinfo->comp_info[1].component_id) goto bad; + INPUT_BYTE(cinfo, cid, return FALSE); + if (cid != cinfo->comp_info[0].component_id) goto bad; + INPUT_BYTE(cinfo, cid, return FALSE); + if (cid != cinfo->comp_info[2].component_id) goto bad; + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0x80) goto bad; /* F1: CENTER1=1, NORM1=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* A(1,1)=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* A(1,2)=0 */ + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* F2: CENTER2=0, NORM2=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 1) goto bad; /* A(2,1)=1 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* A(2,2)=0 */ + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* F3: CENTER3=0, NORM3=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 1) goto bad; /* A(3,1)=1 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) { /* A(3,2)=0 */ + bad: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + + /* OK, valid transform that we can handle. */ + cinfo->color_transform = JCT_SUBTRACT_GREEN; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +/* + * Routines for processing APPn and COM markers. + * These are either saved in memory or discarded, per application request. + * APP0 and APP14 are specially checked to see if they are + * JFIF and Adobe markers, respectively. + */ + +#define APP0_DATA_LEN 14 /* Length of interesting data in APP0 */ +#define APP14_DATA_LEN 12 /* Length of interesting data in APP14 */ +#define APPN_DATA_LEN 14 /* Must be the largest of the above!! */ + + +LOCAL(void) +examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data, + unsigned int datalen, INT32 remaining) +/* Examine first few bytes from an APP0. + * Take appropriate action if it is a JFIF marker. + * datalen is # of bytes at data[], remaining is length of rest of marker data. + */ +{ + INT32 totallen = (INT32) datalen + remaining; + + if (datalen >= APP0_DATA_LEN && + GETJOCTET(data[0]) == 0x4A && + GETJOCTET(data[1]) == 0x46 && + GETJOCTET(data[2]) == 0x49 && + GETJOCTET(data[3]) == 0x46 && + GETJOCTET(data[4]) == 0) { + /* Found JFIF APP0 marker: save info */ + cinfo->saw_JFIF_marker = TRUE; + cinfo->JFIF_major_version = GETJOCTET(data[5]); + cinfo->JFIF_minor_version = GETJOCTET(data[6]); + cinfo->density_unit = GETJOCTET(data[7]); + cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]); + cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]); + /* Check version. + * Major version must be 1, anything else signals an incompatible change. + * (We used to treat this as an error, but now it's a nonfatal warning, + * because some bozo at Hijaak couldn't read the spec.) + * Minor version should be 0..2, but process anyway if newer. + */ + if (cinfo->JFIF_major_version != 1) + WARNMS2(cinfo, JWRN_JFIF_MAJOR, + cinfo->JFIF_major_version, cinfo->JFIF_minor_version); + /* Generate trace messages */ + TRACEMS5(cinfo, 1, JTRC_JFIF, + cinfo->JFIF_major_version, cinfo->JFIF_minor_version, + cinfo->X_density, cinfo->Y_density, cinfo->density_unit); + /* Validate thumbnail dimensions and issue appropriate messages */ + if (GETJOCTET(data[12]) | GETJOCTET(data[13])) + TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL, + GETJOCTET(data[12]), GETJOCTET(data[13])); + totallen -= APP0_DATA_LEN; + if (totallen != + ((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3)) + TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen); + } else if (datalen >= 6 && + GETJOCTET(data[0]) == 0x4A && + GETJOCTET(data[1]) == 0x46 && + GETJOCTET(data[2]) == 0x58 && + GETJOCTET(data[3]) == 0x58 && + GETJOCTET(data[4]) == 0) { + /* Found JFIF "JFXX" extension APP0 marker */ + /* The library doesn't actually do anything with these, + * but we try to produce a helpful trace message. + */ + switch (GETJOCTET(data[5])) { + case 0x10: + TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen); + break; + case 0x11: + TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen); + break; + case 0x13: + TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen); + break; + default: + TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION, + GETJOCTET(data[5]), (int) totallen); + break; + } + } else { + /* Start of APP0 does not match "JFIF" or "JFXX", or too short */ + TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen); + } +} + + +LOCAL(void) +examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data, + unsigned int datalen, INT32 remaining) +/* Examine first few bytes from an APP14. + * Take appropriate action if it is an Adobe marker. + * datalen is # of bytes at data[], remaining is length of rest of marker data. + */ +{ + unsigned int version, flags0, flags1, transform; + + if (datalen >= APP14_DATA_LEN && + GETJOCTET(data[0]) == 0x41 && + GETJOCTET(data[1]) == 0x64 && + GETJOCTET(data[2]) == 0x6F && + GETJOCTET(data[3]) == 0x62 && + GETJOCTET(data[4]) == 0x65) { + /* Found Adobe APP14 marker */ + version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]); + flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]); + flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]); + transform = GETJOCTET(data[11]); + TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform); + cinfo->saw_Adobe_marker = TRUE; + cinfo->Adobe_transform = (UINT8) transform; + } else { + /* Start of APP14 does not match "Adobe", or too short */ + TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining)); + } +} + + +METHODDEF(boolean) +get_interesting_appn (j_decompress_ptr cinfo) +/* Process an APP0 or APP14 marker without saving it */ +{ + INT32 length; + JOCTET b[APPN_DATA_LEN]; + unsigned int i, numtoread; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + /* get the interesting part of the marker data */ + if (length >= APPN_DATA_LEN) + numtoread = APPN_DATA_LEN; + else if (length > 0) + numtoread = (unsigned int) length; + else + numtoread = 0; + for (i = 0; i < numtoread; i++) + INPUT_BYTE(cinfo, b[i], return FALSE); + length -= numtoread; + + /* process it */ + switch (cinfo->unread_marker) { + case M_APP0: + examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length); + break; + case M_APP14: + examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length); + break; + default: + /* can't get here unless jpeg_save_markers chooses wrong processor */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + break; + } + + /* skip any remaining data -- could be lots */ + INPUT_SYNC(cinfo); + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + + +#ifdef SAVE_MARKERS_SUPPORTED + +METHODDEF(boolean) +save_marker (j_decompress_ptr cinfo) +/* Save an APPn or COM marker into the marker list */ +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + jpeg_saved_marker_ptr cur_marker = marker->cur_marker; + unsigned int bytes_read, data_length; + JOCTET FAR * data; + INT32 length = 0; + INPUT_VARS(cinfo); + + if (cur_marker == NULL) { + /* begin reading a marker */ + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + if (length >= 0) { /* watch out for bogus length word */ + /* figure out how much we want to save */ + unsigned int limit; + if (cinfo->unread_marker == (int) M_COM) + limit = marker->length_limit_COM; + else + limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0]; + if ((unsigned int) length < limit) + limit = (unsigned int) length; + /* allocate and initialize the marker item */ + cur_marker = (jpeg_saved_marker_ptr) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(struct jpeg_marker_struct) + limit); + cur_marker->next = NULL; + cur_marker->marker = (UINT8) cinfo->unread_marker; + cur_marker->original_length = (unsigned int) length; + cur_marker->data_length = limit; + /* data area is just beyond the jpeg_marker_struct */ + data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1); + marker->cur_marker = cur_marker; + marker->bytes_read = 0; + bytes_read = 0; + data_length = limit; + } else { + /* deal with bogus length word */ + bytes_read = data_length = 0; + data = NULL; + } + } else { + /* resume reading a marker */ + bytes_read = marker->bytes_read; + data_length = cur_marker->data_length; + data = cur_marker->data + bytes_read; + } + + while (bytes_read < data_length) { + INPUT_SYNC(cinfo); /* move the restart point to here */ + marker->bytes_read = bytes_read; + /* If there's not at least one byte in buffer, suspend */ + MAKE_BYTE_AVAIL(cinfo, return FALSE); + /* Copy bytes with reasonable rapidity */ + while (bytes_read < data_length && bytes_in_buffer > 0) { + *data++ = *next_input_byte++; + bytes_in_buffer--; + bytes_read++; + } + } + + /* Done reading what we want to read */ + if (cur_marker != NULL) { /* will be NULL if bogus length word */ + /* Add new marker to end of list */ + if (cinfo->marker_list == NULL) { + cinfo->marker_list = cur_marker; + } else { + jpeg_saved_marker_ptr prev = cinfo->marker_list; + while (prev->next != NULL) + prev = prev->next; + prev->next = cur_marker; + } + /* Reset pointer & calc remaining data length */ + data = cur_marker->data; + length = cur_marker->original_length - data_length; + } + /* Reset to initial state for next marker */ + marker->cur_marker = NULL; + + /* Process the marker if interesting; else just make a generic trace msg */ + switch (cinfo->unread_marker) { + case M_APP0: + examine_app0(cinfo, data, data_length, length); + break; + case M_APP14: + examine_app14(cinfo, data, data_length, length); + break; + default: + TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, + (int) (data_length + length)); + break; + } + + /* skip any remaining data -- could be lots */ + INPUT_SYNC(cinfo); /* do before skip_input_data */ + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + +#endif /* SAVE_MARKERS_SUPPORTED */ + + +METHODDEF(boolean) +skip_variable (j_decompress_ptr cinfo) +/* Skip over an unknown or uninteresting variable-length marker */ +{ + INT32 length; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length); + + INPUT_SYNC(cinfo); /* do before skip_input_data */ + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + + +/* + * Find the next JPEG marker, save it in cinfo->unread_marker. + * Returns FALSE if had to suspend before reaching a marker; + * in that case cinfo->unread_marker is unchanged. + * + * Note that the result might not be a valid marker code, + * but it will never be 0 or FF. + */ + +LOCAL(boolean) +next_marker (j_decompress_ptr cinfo) +{ + int c; + INPUT_VARS(cinfo); + + for (;;) { + INPUT_BYTE(cinfo, c, return FALSE); + /* Skip any non-FF bytes. + * This may look a bit inefficient, but it will not occur in a valid file. + * We sync after each discarded byte so that a suspending data source + * can discard the byte from its buffer. + */ + while (c != 0xFF) { + cinfo->marker->discarded_bytes++; + INPUT_SYNC(cinfo); + INPUT_BYTE(cinfo, c, return FALSE); + } + /* This loop swallows any duplicate FF bytes. Extra FFs are legal as + * pad bytes, so don't count them in discarded_bytes. We assume there + * will not be so many consecutive FF bytes as to overflow a suspending + * data source's input buffer. + */ + do { + INPUT_BYTE(cinfo, c, return FALSE); + } while (c == 0xFF); + if (c != 0) + break; /* found a valid marker, exit loop */ + /* Reach here if we found a stuffed-zero data sequence (FF/00). + * Discard it and loop back to try again. + */ + cinfo->marker->discarded_bytes += 2; + INPUT_SYNC(cinfo); + } + + if (cinfo->marker->discarded_bytes != 0) { + WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c); + cinfo->marker->discarded_bytes = 0; + } + + cinfo->unread_marker = c; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +first_marker (j_decompress_ptr cinfo) +/* Like next_marker, but used to obtain the initial SOI marker. */ +/* For this marker, we do not allow preceding garbage or fill; otherwise, + * we might well scan an entire input file before realizing it ain't JPEG. + * If an application wants to process non-JFIF files, it must seek to the + * SOI before calling the JPEG library. + */ +{ + int c, c2; + INPUT_VARS(cinfo); + + INPUT_BYTE(cinfo, c, return FALSE); + INPUT_BYTE(cinfo, c2, return FALSE); + if (c != 0xFF || c2 != (int) M_SOI) + ERREXIT2(cinfo, JERR_NO_SOI, c, c2); + + cinfo->unread_marker = c2; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +/* + * Read markers until SOS or EOI. + * + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + * + * Note: This function may return a pseudo SOS marker (with zero + * component number) for treat by input controller's consume_input. + * consume_input itself should filter out (skip) the pseudo marker + * after processing for the caller. + */ + +METHODDEF(int) +read_markers (j_decompress_ptr cinfo) +{ + /* Outer loop repeats once for each marker. */ + for (;;) { + /* Collect the marker proper, unless we already did. */ + /* NB: first_marker() enforces the requirement that SOI appear first. */ + if (cinfo->unread_marker == 0) { + if (! cinfo->marker->saw_SOI) { + if (! first_marker(cinfo)) + return JPEG_SUSPENDED; + } else { + if (! next_marker(cinfo)) + return JPEG_SUSPENDED; + } + } + /* At this point cinfo->unread_marker contains the marker code and the + * input point is just past the marker proper, but before any parameters. + * A suspension will cause us to return with this state still true. + */ + switch (cinfo->unread_marker) { + case M_SOI: + if (! get_soi(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_SOF0: /* Baseline */ + if (! get_sof(cinfo, TRUE, FALSE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF1: /* Extended sequential, Huffman */ + if (! get_sof(cinfo, FALSE, FALSE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF2: /* Progressive, Huffman */ + if (! get_sof(cinfo, FALSE, TRUE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF9: /* Extended sequential, arithmetic */ + if (! get_sof(cinfo, FALSE, FALSE, TRUE)) + return JPEG_SUSPENDED; + break; + + case M_SOF10: /* Progressive, arithmetic */ + if (! get_sof(cinfo, FALSE, TRUE, TRUE)) + return JPEG_SUSPENDED; + break; + + /* Currently unsupported SOFn types */ + case M_SOF3: /* Lossless, Huffman */ + case M_SOF5: /* Differential sequential, Huffman */ + case M_SOF6: /* Differential progressive, Huffman */ + case M_SOF7: /* Differential lossless, Huffman */ + case M_JPG: /* Reserved for JPEG extensions */ + case M_SOF11: /* Lossless, arithmetic */ + case M_SOF13: /* Differential sequential, arithmetic */ + case M_SOF14: /* Differential progressive, arithmetic */ + case M_SOF15: /* Differential lossless, arithmetic */ + ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker); + break; + + case M_SOS: + if (! get_sos(cinfo)) + return JPEG_SUSPENDED; + cinfo->unread_marker = 0; /* processed the marker */ + return JPEG_REACHED_SOS; + + case M_EOI: + TRACEMS(cinfo, 1, JTRC_EOI); + cinfo->unread_marker = 0; /* processed the marker */ + return JPEG_REACHED_EOI; + + case M_DAC: + if (! get_dac(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DHT: + if (! get_dht(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DQT: + if (! get_dqt(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DRI: + if (! get_dri(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_JPG8: + if (! get_lse(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_APP0: + case M_APP1: + case M_APP2: + case M_APP3: + case M_APP4: + case M_APP5: + case M_APP6: + case M_APP7: + case M_APP8: + case M_APP9: + case M_APP10: + case M_APP11: + case M_APP12: + case M_APP13: + case M_APP14: + case M_APP15: + if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[ + cinfo->unread_marker - (int) M_APP0]) (cinfo)) + return JPEG_SUSPENDED; + break; + + case M_COM: + if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo)) + return JPEG_SUSPENDED; + break; + + case M_RST0: /* these are all parameterless */ + case M_RST1: + case M_RST2: + case M_RST3: + case M_RST4: + case M_RST5: + case M_RST6: + case M_RST7: + case M_TEM: + TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker); + break; + + case M_DNL: /* Ignore DNL ... perhaps the wrong thing */ + if (! skip_variable(cinfo)) + return JPEG_SUSPENDED; + break; + + default: /* must be DHP, EXP, JPGn, or RESn */ + /* For now, we treat the reserved markers as fatal errors since they are + * likely to be used to signal incompatible JPEG Part 3 extensions. + * Once the JPEG 3 version-number marker is well defined, this code + * ought to change! + */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + break; + } + /* Successfully processed marker, so reset state variable */ + cinfo->unread_marker = 0; + } /* end loop */ +} + + +/* + * Read a restart marker, which is expected to appear next in the datastream; + * if the marker is not there, take appropriate recovery action. + * Returns FALSE if suspension is required. + * + * This is called by the entropy decoder after it has read an appropriate + * number of MCUs. cinfo->unread_marker may be nonzero if the entropy decoder + * has already read a marker from the data source. Under normal conditions + * cinfo->unread_marker will be reset to 0 before returning; if not reset, + * it holds a marker which the decoder will be unable to read past. + */ + +METHODDEF(boolean) +read_restart_marker (j_decompress_ptr cinfo) +{ + /* Obtain a marker unless we already did. */ + /* Note that next_marker will complain if it skips any data. */ + if (cinfo->unread_marker == 0) { + if (! next_marker(cinfo)) + return FALSE; + } + + if (cinfo->unread_marker == + ((int) M_RST0 + cinfo->marker->next_restart_num)) { + /* Normal case --- swallow the marker and let entropy decoder continue */ + TRACEMS1(cinfo, 3, JTRC_RST, cinfo->marker->next_restart_num); + cinfo->unread_marker = 0; + } else { + /* Uh-oh, the restart markers have been messed up. */ + /* Let the data source manager determine how to resync. */ + if (! (*cinfo->src->resync_to_restart) (cinfo, + cinfo->marker->next_restart_num)) + return FALSE; + } + + /* Update next-restart state */ + cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7; + + return TRUE; +} + + +/* + * This is the default resync_to_restart method for data source managers + * to use if they don't have any better approach. Some data source managers + * may be able to back up, or may have additional knowledge about the data + * which permits a more intelligent recovery strategy; such managers would + * presumably supply their own resync method. + * + * read_restart_marker calls resync_to_restart if it finds a marker other than + * the restart marker it was expecting. (This code is *not* used unless + * a nonzero restart interval has been declared.) cinfo->unread_marker is + * the marker code actually found (might be anything, except 0 or FF). + * The desired restart marker number (0..7) is passed as a parameter. + * This routine is supposed to apply whatever error recovery strategy seems + * appropriate in order to position the input stream to the next data segment. + * Note that cinfo->unread_marker is treated as a marker appearing before + * the current data-source input point; usually it should be reset to zero + * before returning. + * Returns FALSE if suspension is required. + * + * This implementation is substantially constrained by wanting to treat the + * input as a data stream; this means we can't back up. Therefore, we have + * only the following actions to work with: + * 1. Simply discard the marker and let the entropy decoder resume at next + * byte of file. + * 2. Read forward until we find another marker, discarding intervening + * data. (In theory we could look ahead within the current bufferload, + * without having to discard data if we don't find the desired marker. + * This idea is not implemented here, in part because it makes behavior + * dependent on buffer size and chance buffer-boundary positions.) + * 3. Leave the marker unread (by failing to zero cinfo->unread_marker). + * This will cause the entropy decoder to process an empty data segment, + * inserting dummy zeroes, and then we will reprocess the marker. + * + * #2 is appropriate if we think the desired marker lies ahead, while #3 is + * appropriate if the found marker is a future restart marker (indicating + * that we have missed the desired restart marker, probably because it got + * corrupted). + * We apply #2 or #3 if the found marker is a restart marker no more than + * two counts behind or ahead of the expected one. We also apply #2 if the + * found marker is not a legal JPEG marker code (it's certainly bogus data). + * If the found marker is a restart marker more than 2 counts away, we do #1 + * (too much risk that the marker is erroneous; with luck we will be able to + * resync at some future point). + * For any valid non-restart JPEG marker, we apply #3. This keeps us from + * overrunning the end of a scan. An implementation limited to single-scan + * files might find it better to apply #2 for markers other than EOI, since + * any other marker would have to be bogus data in that case. + */ + +GLOBAL(boolean) +jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired) +{ + int marker = cinfo->unread_marker; + int action = 1; + + /* Always put up a warning. */ + WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired); + + /* Outer loop handles repeated decision after scanning forward. */ + for (;;) { + if (marker < (int) M_SOF0) + action = 2; /* invalid marker */ + else if (marker < (int) M_RST0 || marker > (int) M_RST7) + action = 3; /* valid non-restart marker */ + else { + if (marker == ((int) M_RST0 + ((desired+1) & 7)) || + marker == ((int) M_RST0 + ((desired+2) & 7))) + action = 3; /* one of the next two expected restarts */ + else if (marker == ((int) M_RST0 + ((desired-1) & 7)) || + marker == ((int) M_RST0 + ((desired-2) & 7))) + action = 2; /* a prior restart, so advance */ + else + action = 1; /* desired restart or too far away */ + } + TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action); + switch (action) { + case 1: + /* Discard marker and let entropy decoder resume processing. */ + cinfo->unread_marker = 0; + return TRUE; + case 2: + /* Scan to the next marker, and repeat the decision loop. */ + if (! next_marker(cinfo)) + return FALSE; + marker = cinfo->unread_marker; + break; + case 3: + /* Return without advancing past this marker. */ + /* Entropy decoder will be forced to process an empty segment. */ + return TRUE; + } + } /* end loop */ +} + + +/* + * Reset marker processing state to begin a fresh datastream. + */ + +METHODDEF(void) +reset_marker_reader (j_decompress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + cinfo->comp_info = NULL; /* until allocated by get_sof */ + cinfo->input_scan_number = 0; /* no SOS seen yet */ + cinfo->unread_marker = 0; /* no pending marker */ + marker->pub.saw_SOI = FALSE; /* set internal state too */ + marker->pub.saw_SOF = FALSE; + marker->pub.discarded_bytes = 0; + marker->cur_marker = NULL; +} + + +/* + * Initialize the marker reader module. + * This is called only once, when the decompression object is created. + */ + +GLOBAL(void) +jinit_marker_reader (j_decompress_ptr cinfo) +{ + my_marker_ptr marker; + int i; + + /* Create subobject in permanent pool */ + marker = (my_marker_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_marker_reader)); + cinfo->marker = &marker->pub; + /* Initialize public method pointers */ + marker->pub.reset_marker_reader = reset_marker_reader; + marker->pub.read_markers = read_markers; + marker->pub.read_restart_marker = read_restart_marker; + /* Initialize COM/APPn processing. + * By default, we examine and then discard APP0 and APP14, + * but simply discard COM and all other APPn. + */ + marker->process_COM = skip_variable; + marker->length_limit_COM = 0; + for (i = 0; i < 16; i++) { + marker->process_APPn[i] = skip_variable; + marker->length_limit_APPn[i] = 0; + } + marker->process_APPn[0] = get_interesting_appn; + marker->process_APPn[14] = get_interesting_appn; + /* Reset marker processing state */ + reset_marker_reader(cinfo); +} + + +/* + * Control saving of COM and APPn markers into marker_list. + */ + +#ifdef SAVE_MARKERS_SUPPORTED + +GLOBAL(void) +jpeg_save_markers (j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + long maxlength; + jpeg_marker_parser_method processor; + + /* Length limit mustn't be larger than what we can allocate + * (should only be a concern in a 16-bit environment). + */ + maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct); + if (((long) length_limit) > maxlength) + length_limit = (unsigned int) maxlength; + + /* Choose processor routine to use. + * APP0/APP14 have special requirements. + */ + if (length_limit) { + processor = save_marker; + /* If saving APP0/APP14, save at least enough for our internal use. */ + if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN) + length_limit = APP0_DATA_LEN; + else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN) + length_limit = APP14_DATA_LEN; + } else { + processor = skip_variable; + /* If discarding APP0/APP14, use our regular on-the-fly processor. */ + if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14) + processor = get_interesting_appn; + } + + if (marker_code == (int) M_COM) { + marker->process_COM = processor; + marker->length_limit_COM = length_limit; + } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) { + marker->process_APPn[marker_code - (int) M_APP0] = processor; + marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit; + } else + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); +} + +#endif /* SAVE_MARKERS_SUPPORTED */ + + +/* + * Install a special processing method for COM or APPn markers. + */ + +GLOBAL(void) +jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + if (marker_code == (int) M_COM) + marker->process_COM = routine; + else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) + marker->process_APPn[marker_code - (int) M_APP0] = routine; + else + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); +} diff --git a/src/SDL2/external/jpeg-9/jdmaster.c b/src/SDL2/external/jpeg-9/jdmaster.c new file mode 100644 index 000000000..fef72a21b --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdmaster.c @@ -0,0 +1,531 @@ +/* + * jdmaster.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2002-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains master control logic for the JPEG decompressor. + * These routines are concerned with selecting the modules to be executed + * and with determining the number of passes and the work to be done in each + * pass. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_decomp_master pub; /* public fields */ + + int pass_number; /* # of passes completed */ + + boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ + + /* Saved references to initialized quantizer modules, + * in case we need to switch modes. + */ + struct jpeg_color_quantizer * quantizer_1pass; + struct jpeg_color_quantizer * quantizer_2pass; +} my_decomp_master; + +typedef my_decomp_master * my_master_ptr; + + +/* + * Determine whether merged upsample/color conversion should be used. + * CRUCIAL: this must match the actual capabilities of jdmerge.c! + */ + +LOCAL(boolean) +use_merged_upsample (j_decompress_ptr cinfo) +{ +#ifdef UPSAMPLE_MERGING_SUPPORTED + /* Merging is the equivalent of plain box-filter upsampling */ + if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling) + return FALSE; + /* jdmerge.c only supports YCC=>RGB color conversion */ + if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 || + cinfo->out_color_space != JCS_RGB || + cinfo->out_color_components != RGB_PIXELSIZE) + return FALSE; + /* and it only handles 2h1v or 2h2v sampling ratios */ + if (cinfo->comp_info[0].h_samp_factor != 2 || + cinfo->comp_info[1].h_samp_factor != 1 || + cinfo->comp_info[2].h_samp_factor != 1 || + cinfo->comp_info[0].v_samp_factor > 2 || + cinfo->comp_info[1].v_samp_factor != 1 || + cinfo->comp_info[2].v_samp_factor != 1) + return FALSE; + /* furthermore, it doesn't work if we've scaled the IDCTs differently */ + if (cinfo->comp_info[0].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[1].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[2].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[0].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size || + cinfo->comp_info[1].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size || + cinfo->comp_info[2].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size) + return FALSE; + /* ??? also need to test for upsample-time rescaling, when & if supported */ + return TRUE; /* by golly, it'll work... */ +#else + return FALSE; +#endif +} + + +/* + * Compute output image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + * Also note that it may be called before the master module is initialized! + */ + +GLOBAL(void) +jpeg_calc_output_dimensions (j_decompress_ptr cinfo) +/* Do computations that are needed before master selection phase. + * This function is used for full decompression. + */ +{ +#ifdef IDCT_SCALING_SUPPORTED + int ci; + jpeg_component_info *compptr; +#endif + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_READY) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* Compute core output image dimensions and DCT scaling choices. */ + jpeg_core_output_dimensions(cinfo); + +#ifdef IDCT_SCALING_SUPPORTED + + /* In selecting the actual DCT scaling for each component, we try to + * scale up the chroma components via IDCT scaling rather than upsampling. + * This saves time if the upsampler gets to use 1:1 scaling. + * Note this code adapts subsampling ratios which are powers of 2. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + int ssize = 1; + while (cinfo->min_DCT_h_scaled_size * ssize <= + (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize; + ssize = 1; + while (cinfo->min_DCT_v_scaled_size * ssize <= + (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize; + + /* We don't support IDCT ratios larger than 2. */ + if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2) + compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2; + else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2) + compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2; + } + + /* Recompute downsampled dimensions of components; + * application needs to know these if using raw downsampled data. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Size in samples, after IDCT scaling */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * + (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size), + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * + (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size), + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + } + +#endif /* IDCT_SCALING_SUPPORTED */ + + /* Report number of components in selected colorspace. */ + /* Probably this should be in the color conversion module... */ + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + break; + case JCS_RGB: + cinfo->out_color_components = RGB_PIXELSIZE; + break; + case JCS_YCbCr: + cinfo->out_color_components = 3; + break; + case JCS_CMYK: + case JCS_YCCK: + cinfo->out_color_components = 4; + break; + default: /* else must be same colorspace as in file */ + cinfo->out_color_components = cinfo->num_components; + break; + } + cinfo->output_components = (cinfo->quantize_colors ? 1 : + cinfo->out_color_components); + + /* See if upsampler will want to emit more than one row at a time */ + if (use_merged_upsample(cinfo)) + cinfo->rec_outbuf_height = cinfo->max_v_samp_factor; + else + cinfo->rec_outbuf_height = 1; +} + + +/* + * Several decompression processes need to range-limit values to the range + * 0..MAXJSAMPLE; the input value may fall somewhat outside this range + * due to noise introduced by quantization, roundoff error, etc. These + * processes are inner loops and need to be as fast as possible. On most + * machines, particularly CPUs with pipelines or instruction prefetch, + * a (subscript-check-less) C table lookup + * x = sample_range_limit[x]; + * is faster than explicit tests + * if (x < 0) x = 0; + * else if (x > MAXJSAMPLE) x = MAXJSAMPLE; + * These processes all use a common table prepared by the routine below. + * + * For most steps we can mathematically guarantee that the initial value + * of x is within MAXJSAMPLE+1 of the legal range, so a table running from + * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial + * limiting step (just after the IDCT), a wildly out-of-range value is + * possible if the input data is corrupt. To avoid any chance of indexing + * off the end of memory and getting a bad-pointer trap, we perform the + * post-IDCT limiting thus: + * x = range_limit[x & MASK]; + * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit + * samples. Under normal circumstances this is more than enough range and + * a correct output will be generated; with bogus input data the mask will + * cause wraparound, and we will safely generate a bogus-but-in-range output. + * For the post-IDCT step, we want to convert the data from signed to unsigned + * representation by adding CENTERJSAMPLE at the same time that we limit it. + * So the post-IDCT limiting table ends up looking like this: + * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE, + * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), + * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), + * 0,1,...,CENTERJSAMPLE-1 + * Negative inputs select values from the upper half of the table after + * masking. + * + * We can save some space by overlapping the start of the post-IDCT table + * with the simpler range limiting table. The post-IDCT table begins at + * sample_range_limit + CENTERJSAMPLE. + * + * Note that the table is allocated in near data space on PCs; it's small + * enough and used often enough to justify this. + */ + +LOCAL(void) +prepare_range_limit_table (j_decompress_ptr cinfo) +/* Allocate and fill in the sample_range_limit table */ +{ + JSAMPLE * table; + int i; + + table = (JSAMPLE *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE)); + table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */ + cinfo->sample_range_limit = table; + /* First segment of "simple" table: limit[x] = 0 for x < 0 */ + MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); + /* Main part of "simple" table: limit[x] = x */ + for (i = 0; i <= MAXJSAMPLE; i++) + table[i] = (JSAMPLE) i; + table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */ + /* End of simple table, rest of first half of post-IDCT table */ + for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++) + table[i] = MAXJSAMPLE; + /* Second half of post-IDCT table */ + MEMZERO(table + (2 * (MAXJSAMPLE+1)), + (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE)); + MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE), + cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE)); +} + + +/* + * Master selection of decompression modules. + * This is done once at jpeg_start_decompress time. We determine + * which modules will be used and give them appropriate initialization calls. + * We also initialize the decompressor input side to begin consuming data. + * + * Since jpeg_read_header has finished, we know what is in the SOF + * and (first) SOS markers. We also have all the application parameter + * settings. + */ + +LOCAL(void) +master_selection (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + boolean use_c_buffer; + long samplesperrow; + JDIMENSION jd_samplesperrow; + + /* Initialize dimensions and other stuff */ + jpeg_calc_output_dimensions(cinfo); + prepare_range_limit_table(cinfo); + + /* Width of an output scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* Initialize my private state */ + master->pass_number = 0; + master->using_merged_upsample = use_merged_upsample(cinfo); + + /* Color quantizer selection */ + master->quantizer_1pass = NULL; + master->quantizer_2pass = NULL; + /* No mode changes if not using buffered-image mode. */ + if (! cinfo->quantize_colors || ! cinfo->buffered_image) { + cinfo->enable_1pass_quant = FALSE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + } + if (cinfo->quantize_colors) { + if (cinfo->raw_data_out) + ERREXIT(cinfo, JERR_NOTIMPL); + /* 2-pass quantizer only works in 3-component color space. */ + if (cinfo->out_color_components != 3) { + cinfo->enable_1pass_quant = TRUE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + cinfo->colormap = NULL; + } else if (cinfo->colormap != NULL) { + cinfo->enable_external_quant = TRUE; + } else if (cinfo->two_pass_quantize) { + cinfo->enable_2pass_quant = TRUE; + } else { + cinfo->enable_1pass_quant = TRUE; + } + + if (cinfo->enable_1pass_quant) { +#ifdef QUANT_1PASS_SUPPORTED + jinit_1pass_quantizer(cinfo); + master->quantizer_1pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + + /* We use the 2-pass code to map to external colormaps. */ + if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) { +#ifdef QUANT_2PASS_SUPPORTED + jinit_2pass_quantizer(cinfo); + master->quantizer_2pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + /* If both quantizers are initialized, the 2-pass one is left active; + * this is necessary for starting with quantization to an external map. + */ + } + + /* Post-processing: in particular, color conversion first */ + if (! cinfo->raw_data_out) { + if (master->using_merged_upsample) { +#ifdef UPSAMPLE_MERGING_SUPPORTED + jinit_merged_upsampler(cinfo); /* does color conversion too */ +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + jinit_color_deconverter(cinfo); + jinit_upsampler(cinfo); + } + jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant); + } + /* Inverse DCT */ + jinit_inverse_dct(cinfo); + /* Entropy decoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_decoder(cinfo); + else { + jinit_huff_decoder(cinfo); + } + + /* Initialize principal buffer controllers. */ + use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image; + jinit_d_coef_controller(cinfo, use_c_buffer); + + if (! cinfo->raw_data_out) + jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Initialize input side of decompressor to consume first scan. */ + (*cinfo->inputctl->start_input_pass) (cinfo); + +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* If jpeg_start_decompress will read the whole file, initialize + * progress monitoring appropriately. The input step is counted + * as one pass. + */ + if (cinfo->progress != NULL && ! cinfo->buffered_image && + cinfo->inputctl->has_multiple_scans) { + int nscans; + /* Estimate number of scans to set pass_limit. */ + if (cinfo->progressive_mode) { + /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ + nscans = 2 + 3 * cinfo->num_components; + } else { + /* For a nonprogressive multiscan file, estimate 1 scan per component. */ + nscans = cinfo->num_components; + } + cinfo->progress->pass_counter = 0L; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; + cinfo->progress->completed_passes = 0; + cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2); + /* Count the input pass as done */ + master->pass_number++; + } +#endif /* D_MULTISCAN_FILES_SUPPORTED */ +} + + +/* + * Per-pass setup. + * This is called at the beginning of each output pass. We determine which + * modules will be active during this pass and give them appropriate + * start_pass calls. We also set is_dummy_pass to indicate whether this + * is a "real" output pass or a dummy pass for color quantization. + * (In the latter case, jdapistd.c will crank the pass to completion.) + */ + +METHODDEF(void) +prepare_for_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (master->pub.is_dummy_pass) { +#ifdef QUANT_2PASS_SUPPORTED + /* Final pass of 2-pass quantization */ + master->pub.is_dummy_pass = FALSE; + (*cinfo->cquantize->start_pass) (cinfo, FALSE); + (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST); + (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* QUANT_2PASS_SUPPORTED */ + } else { + if (cinfo->quantize_colors && cinfo->colormap == NULL) { + /* Select new quantization method */ + if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) { + cinfo->cquantize = master->quantizer_2pass; + master->pub.is_dummy_pass = TRUE; + } else if (cinfo->enable_1pass_quant) { + cinfo->cquantize = master->quantizer_1pass; + } else { + ERREXIT(cinfo, JERR_MODE_CHANGE); + } + } + (*cinfo->idct->start_pass) (cinfo); + (*cinfo->coef->start_output_pass) (cinfo); + if (! cinfo->raw_data_out) { + if (! master->using_merged_upsample) + (*cinfo->cconvert->start_pass) (cinfo); + (*cinfo->upsample->start_pass) (cinfo); + if (cinfo->quantize_colors) + (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass); + (*cinfo->post->start_pass) (cinfo, + (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); + (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); + } + } + + /* Set up progress monitor's pass info if present */ + if (cinfo->progress != NULL) { + cinfo->progress->completed_passes = master->pass_number; + cinfo->progress->total_passes = master->pass_number + + (master->pub.is_dummy_pass ? 2 : 1); + /* In buffered-image mode, we assume one more output pass if EOI not + * yet reached, but no more passes if EOI has been reached. + */ + if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) { + cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1); + } + } +} + + +/* + * Finish up at end of an output pass. + */ + +METHODDEF(void) +finish_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (cinfo->quantize_colors) + (*cinfo->cquantize->finish_pass) (cinfo); + master->pass_number++; +} + + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Switch to a new external colormap between output passes. + */ + +GLOBAL(void) +jpeg_new_colormap (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_BUFIMAGE) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (cinfo->quantize_colors && cinfo->enable_external_quant && + cinfo->colormap != NULL) { + /* Select 2-pass quantizer for external colormap use */ + cinfo->cquantize = master->quantizer_2pass; + /* Notify quantizer of colormap change */ + (*cinfo->cquantize->new_color_map) (cinfo); + master->pub.is_dummy_pass = FALSE; /* just in case */ + } else + ERREXIT(cinfo, JERR_MODE_CHANGE); +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + + +/* + * Initialize master decompression control and select active modules. + * This is performed at the start of jpeg_start_decompress. + */ + +GLOBAL(void) +jinit_master_decompress (j_decompress_ptr cinfo) +{ + my_master_ptr master; + + master = (my_master_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_decomp_master)); + cinfo->master = (struct jpeg_decomp_master *) master; + master->pub.prepare_for_output_pass = prepare_for_output_pass; + master->pub.finish_output_pass = finish_output_pass; + + master->pub.is_dummy_pass = FALSE; + + master_selection(cinfo); +} diff --git a/src/SDL2/external/jpeg-9/jdmerge.c b/src/SDL2/external/jpeg-9/jdmerge.c new file mode 100644 index 000000000..37444468c --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdmerge.c @@ -0,0 +1,400 @@ +/* + * jdmerge.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains code for merged upsampling/color conversion. + * + * This file combines functions from jdsample.c and jdcolor.c; + * read those files first to understand what's going on. + * + * When the chroma components are to be upsampled by simple replication + * (ie, box filtering), we can save some work in color conversion by + * calculating all the output pixels corresponding to a pair of chroma + * samples at one time. In the conversion equations + * R = Y + K1 * Cr + * G = Y + K2 * Cb + K3 * Cr + * B = Y + K4 * Cb + * only the Y term varies among the group of pixels corresponding to a pair + * of chroma samples, so the rest of the terms can be calculated just once. + * At typical sampling ratios, this eliminates half or three-quarters of the + * multiplications needed for color conversion. + * + * This file currently provides implementations for the following cases: + * YCbCr => RGB color conversion only. + * Sampling ratios of 2h1v or 2h2v. + * No scaling needed at upsample time. + * Corner-aligned (non-CCIR601) sampling alignment. + * Other special cases could be added, but in most applications these are + * the only common cases. (For uncommon cases we fall back on the more + * general code in jdsample.c and jdcolor.c.) + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +#ifdef UPSAMPLE_MERGING_SUPPORTED + + +/* Private subobject */ + +typedef struct { + struct jpeg_upsampler pub; /* public fields */ + + /* Pointer to routine to do actual upsampling/conversion of one row group */ + JMETHOD(void, upmethod, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf)); + + /* Private state for YCC->RGB conversion */ + int * Cr_r_tab; /* => table for Cr to R conversion */ + int * Cb_b_tab; /* => table for Cb to B conversion */ + INT32 * Cr_g_tab; /* => table for Cr to G conversion */ + INT32 * Cb_g_tab; /* => table for Cb to G conversion */ + + /* For 2:1 vertical sampling, we produce two output rows at a time. + * We need a "spare" row buffer to hold the second output row if the + * application provides just a one-row buffer; we also use the spare + * to discard the dummy last row if the image height is odd. + */ + JSAMPROW spare_row; + boolean spare_full; /* T if spare buffer is occupied */ + + JDIMENSION out_row_width; /* samples per output row */ + JDIMENSION rows_to_go; /* counts rows remaining in image */ +} my_upsampler; + +typedef my_upsampler * my_upsample_ptr; + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L<RGB colorspace conversion. + * This is taken directly from jdcolor.c; see that file for more info. + */ + +LOCAL(void) +build_ycc_rgb_table (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + int i; + INT32 x; + SHIFT_TEMPS + + upsample->Cr_r_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cb_b_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cr_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + upsample->Cb_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 1.40200 * x */ + upsample->Cr_r_tab[i] = (int) + RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); + /* Cb=>B value is nearest int to 1.77200 * x */ + upsample->Cb_b_tab[i] = (int) + RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); + /* Cr=>G value is scaled-up -0.71414 * x */ + upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x; + /* Cb=>G value is scaled-up -0.34414 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; + } +} + + +/* + * Initialize for an upsampling pass. + */ + +METHODDEF(void) +start_pass_merged_upsample (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Mark the spare buffer empty */ + upsample->spare_full = FALSE; + /* Initialize total-height counter for detecting bottom of image */ + upsample->rows_to_go = cinfo->output_height; +} + + +/* + * Control routine to do upsampling (and color conversion). + * + * The control routine just handles the row buffering considerations. + */ + +METHODDEF(void) +merged_2v_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +/* 2:1 vertical sampling case: may need a spare row. */ +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + JSAMPROW work_ptrs[2]; + JDIMENSION num_rows; /* number of rows returned to caller */ + + if (upsample->spare_full) { + /* If we have a spare row saved from a previous cycle, just return it. */ + jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0, + 1, upsample->out_row_width); + num_rows = 1; + upsample->spare_full = FALSE; + } else { + /* Figure number of rows to return to caller. */ + num_rows = 2; + /* Not more than the distance to the end of the image. */ + if (num_rows > upsample->rows_to_go) + num_rows = upsample->rows_to_go; + /* And not more than what the client can accept: */ + out_rows_avail -= *out_row_ctr; + if (num_rows > out_rows_avail) + num_rows = out_rows_avail; + /* Create output pointer array for upsampler. */ + work_ptrs[0] = output_buf[*out_row_ctr]; + if (num_rows > 1) { + work_ptrs[1] = output_buf[*out_row_ctr + 1]; + } else { + work_ptrs[1] = upsample->spare_row; + upsample->spare_full = TRUE; + } + /* Now do the upsampling. */ + (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs); + } + + /* Adjust counts */ + *out_row_ctr += num_rows; + upsample->rows_to_go -= num_rows; + /* When the buffer is emptied, declare this input row group consumed */ + if (! upsample->spare_full) + (*in_row_group_ctr)++; +} + + +METHODDEF(void) +merged_1v_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +/* 1:1 vertical sampling case: much easier, never need a spare row. */ +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Just do the upsampling. */ + (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, + output_buf + *out_row_ctr); + /* Adjust counts */ + (*out_row_ctr)++; + (*in_row_group_ctr)++; +} + + +/* + * These are the routines invoked by the control routines to do + * the actual upsampling/conversion. One row group is processed per call. + * + * Note: since we may be writing directly into application-supplied buffers, + * we have to be honest about the output width; we can't assume the buffer + * has been rounded up to an even width. + */ + + +/* + * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical. + */ + +METHODDEF(void) +h2v1_merged_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + register int y, cred, cgreen, cblue; + int cb, cr; + register JSAMPROW outptr; + JSAMPROW inptr0, inptr1, inptr2; + JDIMENSION col; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + int * Crrtab = upsample->Cr_r_tab; + int * Cbbtab = upsample->Cb_b_tab; + INT32 * Crgtab = upsample->Cr_g_tab; + INT32 * Cbgtab = upsample->Cb_g_tab; + SHIFT_TEMPS + + inptr0 = input_buf[0][in_row_group_ctr]; + inptr1 = input_buf[1][in_row_group_ctr]; + inptr2 = input_buf[2][in_row_group_ctr]; + outptr = output_buf[0]; + /* Loop for each pair of output pixels */ + for (col = cinfo->output_width >> 1; col > 0; col--) { + /* Do the chroma part of the calculation */ + cb = GETJSAMPLE(*inptr1++); + cr = GETJSAMPLE(*inptr2++); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + /* Fetch 2 Y values and emit 2 pixels */ + y = GETJSAMPLE(*inptr0++); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + outptr += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr0++); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + outptr += RGB_PIXELSIZE; + } + /* If image width is odd, do the last output column separately */ + if (cinfo->output_width & 1) { + cb = GETJSAMPLE(*inptr1); + cr = GETJSAMPLE(*inptr2); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + y = GETJSAMPLE(*inptr0); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + } +} + + +/* + * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical. + */ + +METHODDEF(void) +h2v2_merged_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + register int y, cred, cgreen, cblue; + int cb, cr; + register JSAMPROW outptr0, outptr1; + JSAMPROW inptr00, inptr01, inptr1, inptr2; + JDIMENSION col; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + int * Crrtab = upsample->Cr_r_tab; + int * Cbbtab = upsample->Cb_b_tab; + INT32 * Crgtab = upsample->Cr_g_tab; + INT32 * Cbgtab = upsample->Cb_g_tab; + SHIFT_TEMPS + + inptr00 = input_buf[0][in_row_group_ctr*2]; + inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; + inptr1 = input_buf[1][in_row_group_ctr]; + inptr2 = input_buf[2][in_row_group_ctr]; + outptr0 = output_buf[0]; + outptr1 = output_buf[1]; + /* Loop for each group of output pixels */ + for (col = cinfo->output_width >> 1; col > 0; col--) { + /* Do the chroma part of the calculation */ + cb = GETJSAMPLE(*inptr1++); + cr = GETJSAMPLE(*inptr2++); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + /* Fetch 4 Y values and emit 4 pixels */ + y = GETJSAMPLE(*inptr00++); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + outptr0 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr00++); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + outptr0 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr01++); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + outptr1 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr01++); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + outptr1 += RGB_PIXELSIZE; + } + /* If image width is odd, do the last output column separately */ + if (cinfo->output_width & 1) { + cb = GETJSAMPLE(*inptr1); + cr = GETJSAMPLE(*inptr2); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + y = GETJSAMPLE(*inptr00); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + y = GETJSAMPLE(*inptr01); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + } +} + + +/* + * Module initialization routine for merged upsampling/color conversion. + * + * NB: this is called under the conditions determined by use_merged_upsample() + * in jdmaster.c. That routine MUST correspond to the actual capabilities + * of this module; no safety checks are made here. + */ + +GLOBAL(void) +jinit_merged_upsampler (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample; + + upsample = (my_upsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_upsampler)); + cinfo->upsample = (struct jpeg_upsampler *) upsample; + upsample->pub.start_pass = start_pass_merged_upsample; + upsample->pub.need_context_rows = FALSE; + + upsample->out_row_width = cinfo->output_width * cinfo->out_color_components; + + if (cinfo->max_v_samp_factor == 2) { + upsample->pub.upsample = merged_2v_upsample; + upsample->upmethod = h2v2_merged_upsample; + /* Allocate a spare row buffer */ + upsample->spare_row = (JSAMPROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) (upsample->out_row_width * SIZEOF(JSAMPLE))); + } else { + upsample->pub.upsample = merged_1v_upsample; + upsample->upmethod = h2v1_merged_upsample; + /* No spare row needed */ + upsample->spare_row = NULL; + } + + build_ycc_rgb_table(cinfo); +} + +#endif /* UPSAMPLE_MERGING_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/jdpostct.c b/src/SDL2/external/jpeg-9/jdpostct.c new file mode 100644 index 000000000..571563d72 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdpostct.c @@ -0,0 +1,290 @@ +/* + * jdpostct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the decompression postprocessing controller. + * This controller manages the upsampling, color conversion, and color + * quantization/reduction steps; specifically, it controls the buffering + * between upsample/color conversion and color quantization/reduction. + * + * If no color quantization/reduction is required, then this module has no + * work to do, and it just hands off to the upsample/color conversion code. + * An integrated upsample/convert/quantize process would replace this module + * entirely. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_post_controller pub; /* public fields */ + + /* Color quantization source buffer: this holds output data from + * the upsample/color conversion step to be passed to the quantizer. + * For two-pass color quantization, we need a full-image buffer; + * for one-pass operation, a strip buffer is sufficient. + */ + jvirt_sarray_ptr whole_image; /* virtual array, or NULL if one-pass */ + JSAMPARRAY buffer; /* strip buffer, or current strip of virtual */ + JDIMENSION strip_height; /* buffer size in rows */ + /* for two-pass mode only: */ + JDIMENSION starting_row; /* row # of first row in current strip */ + JDIMENSION next_row; /* index of next row to fill/empty in strip */ +} my_post_controller; + +typedef my_post_controller * my_post_ptr; + + +/* Forward declarations */ +METHODDEF(void) post_process_1pass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +#ifdef QUANT_2PASS_SUPPORTED +METHODDEF(void) post_process_prepass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +METHODDEF(void) post_process_2pass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +#endif + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (cinfo->quantize_colors) { + /* Single-pass processing with color quantization. */ + post->pub.post_process_data = post_process_1pass; + /* We could be doing buffered-image output before starting a 2-pass + * color quantization; in that case, jinit_d_post_controller did not + * allocate a strip buffer. Use the virtual-array buffer as workspace. + */ + if (post->buffer == NULL) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + (JDIMENSION) 0, post->strip_height, TRUE); + } + } else { + /* For single-pass processing without color quantization, + * I have no work to do; just call the upsampler directly. + */ + post->pub.post_process_data = cinfo->upsample->upsample; + } + break; +#ifdef QUANT_2PASS_SUPPORTED + case JBUF_SAVE_AND_PASS: + /* First pass of 2-pass quantization */ + if (post->whole_image == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + post->pub.post_process_data = post_process_prepass; + break; + case JBUF_CRANK_DEST: + /* Second pass of 2-pass quantization */ + if (post->whole_image == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + post->pub.post_process_data = post_process_2pass; + break; +#endif /* QUANT_2PASS_SUPPORTED */ + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } + post->starting_row = post->next_row = 0; +} + + +/* + * Process some data in the one-pass (strip buffer) case. + * This is used for color precision reduction as well as one-pass quantization. + */ + +METHODDEF(void) +post_process_1pass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION num_rows, max_rows; + + /* Fill the buffer, but not more than what we can dump out in one go. */ + /* Note we rely on the upsampler to detect bottom of image. */ + max_rows = out_rows_avail - *out_row_ctr; + if (max_rows > post->strip_height) + max_rows = post->strip_height; + num_rows = 0; + (*cinfo->upsample->upsample) (cinfo, + input_buf, in_row_group_ctr, in_row_groups_avail, + post->buffer, &num_rows, max_rows); + /* Quantize and emit data. */ + (*cinfo->cquantize->color_quantize) (cinfo, + post->buffer, output_buf + *out_row_ctr, (int) num_rows); + *out_row_ctr += num_rows; +} + + +#ifdef QUANT_2PASS_SUPPORTED + +/* + * Process some data in the first pass of 2-pass quantization. + */ + +METHODDEF(void) +post_process_prepass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION old_next_row, num_rows; + + /* Reposition virtual buffer if at start of strip. */ + if (post->next_row == 0) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + post->starting_row, post->strip_height, TRUE); + } + + /* Upsample some data (up to a strip height's worth). */ + old_next_row = post->next_row; + (*cinfo->upsample->upsample) (cinfo, + input_buf, in_row_group_ctr, in_row_groups_avail, + post->buffer, &post->next_row, post->strip_height); + + /* Allow quantizer to scan new data. No data is emitted, */ + /* but we advance out_row_ctr so outer loop can tell when we're done. */ + if (post->next_row > old_next_row) { + num_rows = post->next_row - old_next_row; + (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row, + (JSAMPARRAY) NULL, (int) num_rows); + *out_row_ctr += num_rows; + } + + /* Advance if we filled the strip. */ + if (post->next_row >= post->strip_height) { + post->starting_row += post->strip_height; + post->next_row = 0; + } +} + + +/* + * Process some data in the second pass of 2-pass quantization. + */ + +METHODDEF(void) +post_process_2pass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION num_rows, max_rows; + + /* Reposition virtual buffer if at start of strip. */ + if (post->next_row == 0) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + post->starting_row, post->strip_height, FALSE); + } + + /* Determine number of rows to emit. */ + num_rows = post->strip_height - post->next_row; /* available in strip */ + max_rows = out_rows_avail - *out_row_ctr; /* available in output area */ + if (num_rows > max_rows) + num_rows = max_rows; + /* We have to check bottom of image here, can't depend on upsampler. */ + max_rows = cinfo->output_height - post->starting_row; + if (num_rows > max_rows) + num_rows = max_rows; + + /* Quantize and emit data. */ + (*cinfo->cquantize->color_quantize) (cinfo, + post->buffer + post->next_row, output_buf + *out_row_ctr, + (int) num_rows); + *out_row_ctr += num_rows; + + /* Advance if we filled the strip. */ + post->next_row += num_rows; + if (post->next_row >= post->strip_height) { + post->starting_row += post->strip_height; + post->next_row = 0; + } +} + +#endif /* QUANT_2PASS_SUPPORTED */ + + +/* + * Initialize postprocessing controller. + */ + +GLOBAL(void) +jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_post_ptr post; + + post = (my_post_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_post_controller)); + cinfo->post = (struct jpeg_d_post_controller *) post; + post->pub.start_pass = start_pass_dpost; + post->whole_image = NULL; /* flag for no virtual arrays */ + post->buffer = NULL; /* flag for no strip buffer */ + + /* Create the quantization buffer, if needed */ + if (cinfo->quantize_colors) { + /* The buffer strip height is max_v_samp_factor, which is typically + * an efficient number of rows for upsampling to return. + * (In the presence of output rescaling, we might want to be smarter?) + */ + post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor; + if (need_full_buffer) { + /* Two-pass color quantization: need full-image storage. */ + /* We round up the number of rows to a multiple of the strip height. */ +#ifdef QUANT_2PASS_SUPPORTED + post->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + cinfo->output_width * cinfo->out_color_components, + (JDIMENSION) jround_up((long) cinfo->output_height, + (long) post->strip_height), + post->strip_height); +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif /* QUANT_2PASS_SUPPORTED */ + } else { + /* One-pass color quantization: just make a strip buffer. */ + post->buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->output_width * cinfo->out_color_components, + post->strip_height); + } + } +} diff --git a/src/SDL2/external/jpeg-9/jdsample.c b/src/SDL2/external/jpeg-9/jdsample.c new file mode 100644 index 000000000..7bc8885b0 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdsample.c @@ -0,0 +1,361 @@ +/* + * jdsample.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2002-2008 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains upsampling routines. + * + * Upsampling input data is counted in "row groups". A row group + * is defined to be (v_samp_factor * DCT_v_scaled_size / min_DCT_v_scaled_size) + * sample rows of each component. Upsampling will normally produce + * max_v_samp_factor pixel rows from each row group (but this could vary + * if the upsampler is applying a scale factor of its own). + * + * An excellent reference for image resampling is + * Digital Image Warping, George Wolberg, 1990. + * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Pointer to routine to upsample a single component */ +typedef JMETHOD(void, upsample1_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)); + +/* Private subobject */ + +typedef struct { + struct jpeg_upsampler pub; /* public fields */ + + /* Color conversion buffer. When using separate upsampling and color + * conversion steps, this buffer holds one upsampled row group until it + * has been color converted and output. + * Note: we do not allocate any storage for component(s) which are full-size, + * ie do not need rescaling. The corresponding entry of color_buf[] is + * simply set to point to the input data array, thereby avoiding copying. + */ + JSAMPARRAY color_buf[MAX_COMPONENTS]; + + /* Per-component upsampling method pointers */ + upsample1_ptr methods[MAX_COMPONENTS]; + + int next_row_out; /* counts rows emitted from color_buf */ + JDIMENSION rows_to_go; /* counts rows remaining in image */ + + /* Height of an input row group for each component. */ + int rowgroup_height[MAX_COMPONENTS]; + + /* These arrays save pixel expansion factors so that int_expand need not + * recompute them each time. They are unused for other upsampling methods. + */ + UINT8 h_expand[MAX_COMPONENTS]; + UINT8 v_expand[MAX_COMPONENTS]; +} my_upsampler; + +typedef my_upsampler * my_upsample_ptr; + + +/* + * Initialize for an upsampling pass. + */ + +METHODDEF(void) +start_pass_upsample (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Mark the conversion buffer empty */ + upsample->next_row_out = cinfo->max_v_samp_factor; + /* Initialize total-height counter for detecting bottom of image */ + upsample->rows_to_go = cinfo->output_height; +} + + +/* + * Control routine to do upsampling (and color conversion). + * + * In this version we upsample each component independently. + * We upsample one row group into the conversion buffer, then apply + * color conversion a row at a time. + */ + +METHODDEF(void) +sep_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + int ci; + jpeg_component_info * compptr; + JDIMENSION num_rows; + + /* Fill the conversion buffer, if it's empty */ + if (upsample->next_row_out >= cinfo->max_v_samp_factor) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Invoke per-component upsample method. Notice we pass a POINTER + * to color_buf[ci], so that fullsize_upsample can change it. + */ + (*upsample->methods[ci]) (cinfo, compptr, + input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]), + upsample->color_buf + ci); + } + upsample->next_row_out = 0; + } + + /* Color-convert and emit rows */ + + /* How many we have in the buffer: */ + num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out); + /* Not more than the distance to the end of the image. Need this test + * in case the image height is not a multiple of max_v_samp_factor: + */ + if (num_rows > upsample->rows_to_go) + num_rows = upsample->rows_to_go; + /* And not more than what the client can accept: */ + out_rows_avail -= *out_row_ctr; + if (num_rows > out_rows_avail) + num_rows = out_rows_avail; + + (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf, + (JDIMENSION) upsample->next_row_out, + output_buf + *out_row_ctr, + (int) num_rows); + + /* Adjust counts */ + *out_row_ctr += num_rows; + upsample->rows_to_go -= num_rows; + upsample->next_row_out += num_rows; + /* When the buffer is emptied, declare this input row group consumed */ + if (upsample->next_row_out >= cinfo->max_v_samp_factor) + (*in_row_group_ctr)++; +} + + +/* + * These are the routines invoked by sep_upsample to upsample pixel values + * of a single component. One row group is processed per call. + */ + + +/* + * For full-size components, we just make color_buf[ci] point at the + * input buffer, and thus avoid copying any data. Note that this is + * safe only because sep_upsample doesn't declare the input row group + * "consumed" until we are done color converting and emitting it. + */ + +METHODDEF(void) +fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + *output_data_ptr = input_data; +} + + +/* + * This is a no-op version used for "uninteresting" components. + * These components will not be referenced by color conversion. + */ + +METHODDEF(void) +noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + *output_data_ptr = NULL; /* safety check */ +} + + +/* + * This version handles any integral sampling ratios. + * This is not used for typical JPEG files, so it need not be fast. + * Nor, for that matter, is it particularly accurate: the algorithm is + * simple replication of the input pixel onto the corresponding output + * pixels. The hi-falutin sampling literature refers to this as a + * "box filter". A box filter tends to introduce visible artifacts, + * so if you are actually going to use 3:1 or 4:1 sampling ratios + * you would be well advised to improve this code. + */ + +METHODDEF(void) +int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + register int h; + JSAMPROW outend; + int h_expand, v_expand; + int inrow, outrow; + + h_expand = upsample->h_expand[compptr->component_index]; + v_expand = upsample->v_expand[compptr->component_index]; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + /* Generate one output row with proper horizontal expansion */ + inptr = input_data[inrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + for (h = h_expand; h > 0; h--) { + *outptr++ = invalue; + } + } + /* Generate any additional output rows by duplicating the first one */ + if (v_expand > 1) { + jcopy_sample_rows(output_data, outrow, output_data, outrow+1, + v_expand-1, cinfo->output_width); + } + inrow++; + outrow += v_expand; + } +} + + +/* + * Fast processing for the common case of 2:1 horizontal and 1:1 vertical. + * It's still a box filter. + */ + +METHODDEF(void) +h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + JSAMPROW outend; + int outrow; + + for (outrow = 0; outrow < cinfo->max_v_samp_factor; outrow++) { + inptr = input_data[outrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + *outptr++ = invalue; + *outptr++ = invalue; + } + } +} + + +/* + * Fast processing for the common case of 2:1 horizontal and 2:1 vertical. + * It's still a box filter. + */ + +METHODDEF(void) +h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + JSAMPROW outend; + int inrow, outrow; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + inptr = input_data[inrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + *outptr++ = invalue; + *outptr++ = invalue; + } + jcopy_sample_rows(output_data, outrow, output_data, outrow+1, + 1, cinfo->output_width); + inrow++; + outrow += 2; + } +} + + +/* + * Module initialization routine for upsampling. + */ + +GLOBAL(void) +jinit_upsampler (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample; + int ci; + jpeg_component_info * compptr; + boolean need_buffer; + int h_in_group, v_in_group, h_out_group, v_out_group; + + upsample = (my_upsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_upsampler)); + cinfo->upsample = (struct jpeg_upsampler *) upsample; + upsample->pub.start_pass = start_pass_upsample; + upsample->pub.upsample = sep_upsample; + upsample->pub.need_context_rows = FALSE; /* until we find out differently */ + + if (cinfo->CCIR601_sampling) /* this isn't supported */ + ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); + + /* Verify we can handle the sampling factors, select per-component methods, + * and create storage as needed. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Compute size of an "input group" after IDCT scaling. This many samples + * are to be converted to max_h_samp_factor * max_v_samp_factor pixels. + */ + h_in_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) / + cinfo->min_DCT_h_scaled_size; + v_in_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; + h_out_group = cinfo->max_h_samp_factor; + v_out_group = cinfo->max_v_samp_factor; + upsample->rowgroup_height[ci] = v_in_group; /* save for use later */ + need_buffer = TRUE; + if (! compptr->component_needed) { + /* Don't bother to upsample an uninteresting component. */ + upsample->methods[ci] = noop_upsample; + need_buffer = FALSE; + } else if (h_in_group == h_out_group && v_in_group == v_out_group) { + /* Fullsize components can be processed without any work. */ + upsample->methods[ci] = fullsize_upsample; + need_buffer = FALSE; + } else if (h_in_group * 2 == h_out_group && + v_in_group == v_out_group) { + /* Special case for 2h1v upsampling */ + upsample->methods[ci] = h2v1_upsample; + } else if (h_in_group * 2 == h_out_group && + v_in_group * 2 == v_out_group) { + /* Special case for 2h2v upsampling */ + upsample->methods[ci] = h2v2_upsample; + } else if ((h_out_group % h_in_group) == 0 && + (v_out_group % v_in_group) == 0) { + /* Generic integral-factors upsampling method */ + upsample->methods[ci] = int_upsample; + upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group); + upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group); + } else + ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); + if (need_buffer) { + upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) jround_up((long) cinfo->output_width, + (long) cinfo->max_h_samp_factor), + (JDIMENSION) cinfo->max_v_samp_factor); + } + } +} diff --git a/src/SDL2/external/jpeg-9/jdtrans.c b/src/SDL2/external/jpeg-9/jdtrans.c new file mode 100644 index 000000000..22dd47fb5 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jdtrans.c @@ -0,0 +1,140 @@ +/* + * jdtrans.c + * + * Copyright (C) 1995-1997, Thomas G. Lane. + * Modified 2000-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains library routines for transcoding decompression, + * that is, reading raw DCT coefficient arrays from an input JPEG file. + * The routines in jdapimin.c will also be needed by a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo)); + + +/* + * Read the coefficient arrays from a JPEG file. + * jpeg_read_header must be completed before calling this. + * + * The entire image is read into a set of virtual coefficient-block arrays, + * one per component. The return value is a pointer to the array of + * virtual-array descriptors. These can be manipulated directly via the + * JPEG memory manager, or handed off to jpeg_write_coefficients(). + * To release the memory occupied by the virtual arrays, call + * jpeg_finish_decompress() when done with the data. + * + * An alternative usage is to simply obtain access to the coefficient arrays + * during a buffered-image-mode decompression operation. This is allowed + * after any jpeg_finish_output() call. The arrays can be accessed until + * jpeg_finish_decompress() is called. (Note that any call to the library + * may reposition the arrays, so don't rely on access_virt_barray() results + * to stay valid across library calls.) + * + * Returns NULL if suspended. This case need be checked only if + * a suspending data source is used. + */ + +GLOBAL(jvirt_barray_ptr *) +jpeg_read_coefficients (j_decompress_ptr cinfo) +{ + if (cinfo->global_state == DSTATE_READY) { + /* First call: initialize active modules */ + transdecode_master_selection(cinfo); + cinfo->global_state = DSTATE_RDCOEFS; + } + if (cinfo->global_state == DSTATE_RDCOEFS) { + /* Absorb whole file into the coef buffer */ + for (;;) { + int retcode; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + /* Absorb some more input */ + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_SUSPENDED) + return NULL; + if (retcode == JPEG_REACHED_EOI) + break; + /* Advance progress counter if appropriate */ + if (cinfo->progress != NULL && + (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { + if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { + /* startup underestimated number of scans; ratchet up one scan */ + cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; + } + } + } + /* Set state so that jpeg_finish_decompress does the right thing */ + cinfo->global_state = DSTATE_STOPPING; + } + /* At this point we should be in state DSTATE_STOPPING if being used + * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access + * to the coefficients during a full buffered-image-mode decompression. + */ + if ((cinfo->global_state == DSTATE_STOPPING || + cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) { + return cinfo->coef->coef_arrays; + } + /* Oops, improper usage */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return NULL; /* keep compiler happy */ +} + + +/* + * Master selection of decompression modules for transcoding. + * This substitutes for jdmaster.c's initialization of the full decompressor. + */ + +LOCAL(void) +transdecode_master_selection (j_decompress_ptr cinfo) +{ + /* This is effectively a buffered-image operation. */ + cinfo->buffered_image = TRUE; + + /* Compute output image dimensions and related values. */ + jpeg_core_output_dimensions(cinfo); + + /* Entropy decoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_decoder(cinfo); + else { + jinit_huff_decoder(cinfo); + } + + /* Always get a full-image coefficient buffer. */ + jinit_d_coef_controller(cinfo, TRUE); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Initialize input side of decompressor to consume first scan. */ + (*cinfo->inputctl->start_input_pass) (cinfo); + + /* Initialize progress monitoring. */ + if (cinfo->progress != NULL) { + int nscans; + /* Estimate number of scans to set pass_limit. */ + if (cinfo->progressive_mode) { + /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ + nscans = 2 + 3 * cinfo->num_components; + } else if (cinfo->inputctl->has_multiple_scans) { + /* For a nonprogressive multiscan file, estimate 1 scan per component. */ + nscans = cinfo->num_components; + } else { + nscans = 1; + } + cinfo->progress->pass_counter = 0L; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; + cinfo->progress->completed_passes = 0; + cinfo->progress->total_passes = 1; + } +} diff --git a/src/SDL2/external/jpeg-9/jerror.c b/src/SDL2/external/jpeg-9/jerror.c new file mode 100644 index 000000000..8c0b9e071 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jerror.c @@ -0,0 +1,253 @@ +/* + * jerror.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains simple error-reporting and trace-message routines. + * These are suitable for Unix-like systems and others where writing to + * stderr is the right thing to do. Many applications will want to replace + * some or all of these routines. + * + * If you define USE_WINDOWS_MESSAGEBOX in jconfig.h or in the makefile, + * you get a Windows-specific hack to display error messages in a dialog box. + * It ain't much, but it beats dropping error messages into the bit bucket, + * which is what happens to output to stderr under most Windows C compilers. + * + * These routines are used by both the compression and decompression code. + */ + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jversion.h" +#include "jerror.h" + +#ifdef USE_WINDOWS_MESSAGEBOX +#include +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif + + +/* + * Create the message string table. + * We do this from the master message list in jerror.h by re-reading + * jerror.h with a suitable definition for macro JMESSAGE. + * The message table is made an external symbol just in case any applications + * want to refer to it directly. + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_message_table jMsgTable +#endif + +#define JMESSAGE(code,string) string , + +const char * const jpeg_std_message_table[] = { +#include "jerror.h" + NULL +}; + + +/* + * Error exit handler: must not return to caller. + * + * Applications may override this if they want to get control back after + * an error. Typically one would longjmp somewhere instead of exiting. + * The setjmp buffer can be made a private field within an expanded error + * handler object. Note that the info needed to generate an error message + * is stored in the error object, so you can generate the message now or + * later, at your convenience. + * You should make sure that the JPEG object is cleaned up (with jpeg_abort + * or jpeg_destroy) at some point. + */ + +METHODDEF(noreturn_t) +error_exit (j_common_ptr cinfo) +{ + /* Always display the message */ + (*cinfo->err->output_message) (cinfo); + + /* Let the memory manager delete any temp files before we die */ + jpeg_destroy(cinfo); + + exit(EXIT_FAILURE); +} + + +/* + * Actual output of an error or trace message. + * Applications may override this method to send JPEG messages somewhere + * other than stderr. + * + * On Windows, printing to stderr is generally completely useless, + * so we provide optional code to produce an error-dialog popup. + * Most Windows applications will still prefer to override this routine, + * but if they don't, it'll do something at least marginally useful. + * + * NOTE: to use the library in an environment that doesn't support the + * C stdio library, you may have to delete the call to fprintf() entirely, + * not just not use this routine. + */ + +METHODDEF(void) +output_message (j_common_ptr cinfo) +{ + char buffer[JMSG_LENGTH_MAX]; + + /* Create the message */ + (*cinfo->err->format_message) (cinfo, buffer); + +#ifdef USE_WINDOWS_MESSAGEBOX + /* Display it in a message dialog box */ + MessageBox(GetActiveWindow(), buffer, "JPEG Library Error", + MB_OK | MB_ICONERROR); +#else + /* Send it to stderr, adding a newline */ + fprintf(stderr, "%s\n", buffer); +#endif +} + + +/* + * Decide whether to emit a trace or warning message. + * msg_level is one of: + * -1: recoverable corrupt-data warning, may want to abort. + * 0: important advisory messages (always display to user). + * 1: first level of tracing detail. + * 2,3,...: successively more detailed tracing messages. + * An application might override this method if it wanted to abort on warnings + * or change the policy about which messages to display. + */ + +METHODDEF(void) +emit_message (j_common_ptr cinfo, int msg_level) +{ + struct jpeg_error_mgr * err = cinfo->err; + + if (msg_level < 0) { + /* It's a warning message. Since corrupt files may generate many warnings, + * the policy implemented here is to show only the first warning, + * unless trace_level >= 3. + */ + if (err->num_warnings == 0 || err->trace_level >= 3) + (*err->output_message) (cinfo); + /* Always count warnings in num_warnings. */ + err->num_warnings++; + } else { + /* It's a trace message. Show it if trace_level >= msg_level. */ + if (err->trace_level >= msg_level) + (*err->output_message) (cinfo); + } +} + + +/* + * Format a message string for the most recent JPEG error or message. + * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX + * characters. Note that no '\n' character is added to the string. + * Few applications should need to override this method. + */ + +METHODDEF(void) +format_message (j_common_ptr cinfo, char * buffer) +{ + struct jpeg_error_mgr * err = cinfo->err; + int msg_code = err->msg_code; + const char * msgtext = NULL; + const char * msgptr; + char ch; + boolean isstring; + + /* Look up message string in proper table */ + if (msg_code > 0 && msg_code <= err->last_jpeg_message) { + msgtext = err->jpeg_message_table[msg_code]; + } else if (err->addon_message_table != NULL && + msg_code >= err->first_addon_message && + msg_code <= err->last_addon_message) { + msgtext = err->addon_message_table[msg_code - err->first_addon_message]; + } + + /* Defend against bogus message number */ + if (msgtext == NULL) { + err->msg_parm.i[0] = msg_code; + msgtext = err->jpeg_message_table[0]; + } + + /* Check for string parameter, as indicated by %s in the message text */ + isstring = FALSE; + msgptr = msgtext; + while ((ch = *msgptr++) != '\0') { + if (ch == '%') { + if (*msgptr == 's') isstring = TRUE; + break; + } + } + + /* Format the message into the passed buffer */ + if (isstring) + sprintf(buffer, msgtext, err->msg_parm.s); + else + sprintf(buffer, msgtext, + err->msg_parm.i[0], err->msg_parm.i[1], + err->msg_parm.i[2], err->msg_parm.i[3], + err->msg_parm.i[4], err->msg_parm.i[5], + err->msg_parm.i[6], err->msg_parm.i[7]); +} + + +/* + * Reset error state variables at start of a new image. + * This is called during compression startup to reset trace/error + * processing to default state, without losing any application-specific + * method pointers. An application might possibly want to override + * this method if it has additional error processing state. + */ + +METHODDEF(void) +reset_error_mgr (j_common_ptr cinfo) +{ + cinfo->err->num_warnings = 0; + /* trace_level is not reset since it is an application-supplied parameter */ + cinfo->err->msg_code = 0; /* may be useful as a flag for "no error" */ +} + + +/* + * Fill in the standard error-handling methods in a jpeg_error_mgr object. + * Typical call is: + * struct jpeg_compress_struct cinfo; + * struct jpeg_error_mgr err; + * + * cinfo.err = jpeg_std_error(&err); + * after which the application may override some of the methods. + */ + +GLOBAL(struct jpeg_error_mgr *) +jpeg_std_error (struct jpeg_error_mgr * err) +{ + err->error_exit = error_exit; + err->emit_message = emit_message; + err->output_message = output_message; + err->format_message = format_message; + err->reset_error_mgr = reset_error_mgr; + + err->trace_level = 0; /* default = no tracing */ + err->num_warnings = 0; /* no warnings emitted yet */ + err->msg_code = 0; /* may be useful as a flag for "no error" */ + + /* Initialize message table pointers */ + err->jpeg_message_table = jpeg_std_message_table; + err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1; + + err->addon_message_table = NULL; + err->first_addon_message = 0; /* for safety */ + err->last_addon_message = 0; + + return err; +} diff --git a/src/SDL2/external/jpeg-9/jerror.h b/src/SDL2/external/jpeg-9/jerror.h new file mode 100644 index 000000000..a4b661f71 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jerror.h @@ -0,0 +1,304 @@ +/* + * jerror.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 1997-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the error and message codes for the JPEG library. + * Edit this file to add new codes, or to translate the message strings to + * some other language. + * A set of error-reporting macros are defined too. Some applications using + * the JPEG library may wish to include this file to get the error codes + * and/or the macros. + */ + +/* + * To define the enum list of message codes, include this file without + * defining macro JMESSAGE. To create a message string table, include it + * again with a suitable JMESSAGE definition (see jerror.c for an example). + */ +#ifndef JMESSAGE +#ifndef JERROR_H +/* First time through, define the enum list */ +#define JMAKE_ENUM_LIST +#else +/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ +#define JMESSAGE(code,string) +#endif /* JERROR_H */ +#endif /* JMESSAGE */ + +#ifdef JMAKE_ENUM_LIST + +typedef enum { + +#define JMESSAGE(code,string) code , + +#endif /* JMAKE_ENUM_LIST */ + +JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ + +/* For maintenance convenience, list is alphabetical by message code name */ +JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") +JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") +JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") +JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") +JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request") +JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range") +JMESSAGE(JERR_BAD_DCTSIZE, "DCT scaled block size %dx%d not supported") +JMESSAGE(JERR_BAD_DROP_SAMPLING, + "Component index %d: mismatching sampling ratio %d:%d, %d:%d, %c") +JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition") +JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") +JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") +JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length") +JMESSAGE(JERR_BAD_LIB_VERSION, + "Wrong JPEG library version: library is %d, caller expects %d") +JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan") +JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d") +JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d") +JMESSAGE(JERR_BAD_PROGRESSION, + "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d") +JMESSAGE(JERR_BAD_PROG_SCRIPT, + "Invalid progressive parameters at scan script entry %d") +JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors") +JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d") +JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d") +JMESSAGE(JERR_BAD_STRUCT_SIZE, + "JPEG parameter struct mismatch: library thinks size is %u, caller expects %u") +JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access") +JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small") +JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here") +JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet") +JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d") +JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request") +JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d") +JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x") +JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d") +JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d") +JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)") +JMESSAGE(JERR_EMS_READ, "Read from EMS failed") +JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed") +JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") +JMESSAGE(JERR_FILE_READ, "Input file read error") +JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") +JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") +JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") +JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") +JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") +JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") +JMESSAGE(JERR_INPUT_EOF, "Premature end of input file") +JMESSAGE(JERR_MISMATCHED_QUANT_TABLE, + "Cannot transcode due to multiple use of quantization table %d") +JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") +JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") +JMESSAGE(JERR_NOTIMPL, "Not implemented yet") +JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") +JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined") +JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") +JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") +JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") +JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined") +JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x") +JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)") +JMESSAGE(JERR_QUANT_COMPONENTS, + "Cannot quantize more than %d color components") +JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") +JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") +JMESSAGE(JERR_SOF_BEFORE, "Invalid JPEG file structure: %s before SOF") +JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") +JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") +JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") +JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") +JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") +JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") +JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") +JMESSAGE(JERR_TFILE_WRITE, + "Write failed on temporary file --- out of disk space?") +JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines") +JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x") +JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up") +JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation") +JMESSAGE(JERR_XMS_READ, "Read from XMS failed") +JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed") +JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT) +JMESSAGE(JMSG_VERSION, JVERSION) +JMESSAGE(JTRC_16BIT_TABLES, + "Caution: quantization tables are too coarse for baseline JPEG") +JMESSAGE(JTRC_ADOBE, + "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d") +JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u") +JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u") +JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x") +JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x") +JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d") +JMESSAGE(JTRC_DRI, "Define Restart Interval %u") +JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u") +JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u") +JMESSAGE(JTRC_EOI, "End Of Image") +JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d") +JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d %d") +JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE, + "Warning: thumbnail image size does not match data length %u") +JMESSAGE(JTRC_JFIF_EXTENSION, + "JFIF extension marker: type 0x%02x, length %u") +JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image") +JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u") +JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x") +JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u") +JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors") +JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors") +JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization") +JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d") +JMESSAGE(JTRC_RST, "RST%d") +JMESSAGE(JTRC_SMOOTH_NOTIMPL, + "Smoothing not supported with nonstandard sampling ratios") +JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d") +JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d") +JMESSAGE(JTRC_SOI, "Start of Image") +JMESSAGE(JTRC_SOS, "Start Of Scan: %d components") +JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d") +JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d") +JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s") +JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s") +JMESSAGE(JTRC_THUMB_JPEG, + "JFIF extension marker: JPEG-compressed thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_PALETTE, + "JFIF extension marker: palette thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_RGB, + "JFIF extension marker: RGB thumbnail image, length %u") +JMESSAGE(JTRC_UNKNOWN_IDS, + "Unrecognized component IDs %d %d %d, assuming YCbCr") +JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") +JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") +JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") +JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code") +JMESSAGE(JWRN_BOGUS_PROGRESSION, + "Inconsistent progression sequence for component %d coefficient %d") +JMESSAGE(JWRN_EXTRANEOUS_DATA, + "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x") +JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment") +JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code") +JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d") +JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file") +JMESSAGE(JWRN_MUST_RESYNC, + "Corrupt JPEG data: found marker 0x%02x instead of RST%d") +JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG") +JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") + +#ifdef JMAKE_ENUM_LIST + + JMSG_LASTMSGCODE +} J_MESSAGE_CODE; + +#undef JMAKE_ENUM_LIST +#endif /* JMAKE_ENUM_LIST */ + +/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ +#undef JMESSAGE + + +#ifndef JERROR_H +#define JERROR_H + +/* Macros to simplify using the error and trace message stuff */ +/* The first parameter is either type of cinfo pointer */ + +/* Fatal errors (print message and exit) */ +#define ERREXIT(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT3(cinfo,code,p1,p2,p3) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT6(cinfo,code,p1,p2,p3,p4,p5,p6) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (cinfo)->err->msg_parm.i[4] = (p5), \ + (cinfo)->err->msg_parm.i[5] = (p6), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXITS(cinfo,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) + +#define MAKESTMT(stuff) do { stuff } while (0) + +/* Nonfatal errors (we can keep going, but the data is probably corrupt) */ +#define WARNMS(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) + +/* Informational/debugging messages */ +#define TRACEMS(cinfo,lvl,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS1(cinfo,lvl,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS2(cinfo,lvl,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMSS(cinfo,lvl,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) + +#endif /* JERROR_H */ diff --git a/src/SDL2/external/jpeg-9/jfdctflt.c b/src/SDL2/external/jpeg-9/jfdctflt.c new file mode 100644 index 000000000..74d0d862d --- /dev/null +++ b/src/SDL2/external/jpeg-9/jfdctflt.c @@ -0,0 +1,174 @@ +/* + * jfdctflt.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a floating-point implementation of the + * forward DCT (Discrete Cosine Transform). + * + * This implementation should be more accurate than either of the integer + * DCT implementations. However, it may not give the same results on all + * machines because of differences in roundoff behavior. Speed will depend + * on the hardware's floating point capacity. + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with a fixed-point + * implementation, accuracy is lost due to imprecise representation of the + * scaled quantization values. However, that problem does not arise if + * we use floating point arithmetic. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_FLOAT_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* + * Perform the forward DCT on one block of samples. + */ + +GLOBAL(void) +jpeg_fdct_float (FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + FAST_FLOAT tmp10, tmp11, tmp12, tmp13; + FAST_FLOAT z1, z2, z3, z4, z5, z11, z13; + FAST_FLOAT *dataptr; + JSAMPROW elemptr; + int ctr; + + /* Pass 1: process rows. */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Load data into workspace */ + tmp0 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7])); + tmp7 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7])); + tmp1 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6])); + tmp6 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6])); + tmp2 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5])); + tmp5 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5])); + tmp3 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4])); + tmp4 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4])); + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + /* Apply unsigned->signed conversion */ + dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */ + dataptr[4] = tmp10 - tmp11; + + z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ + dataptr[2] = tmp13 + z1; /* phase 5 */ + dataptr[6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ + z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ + z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ + z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[5] = z13 + z2; /* phase 6 */ + dataptr[3] = z13 - z2; + dataptr[1] = z11 + z4; + dataptr[7] = z11 - z4; + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ + dataptr[DCTSIZE*4] = tmp10 - tmp11; + + z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ + dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ + dataptr[DCTSIZE*6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ + z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ + z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ + z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ + dataptr[DCTSIZE*3] = z13 - z2; + dataptr[DCTSIZE*1] = z11 + z4; + dataptr[DCTSIZE*7] = z11 - z4; + + dataptr++; /* advance pointer to next column */ + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/jfdctfst.c b/src/SDL2/external/jpeg-9/jfdctfst.c new file mode 100644 index 000000000..8cad5f229 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jfdctfst.c @@ -0,0 +1,230 @@ +/* + * jfdctfst.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a fast, not so accurate integer implementation of the + * forward DCT (Discrete Cosine Transform). + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with fixed-point math, + * accuracy is lost due to imprecise representation of the scaled + * quantization values. The smaller the quantization table entry, the less + * precise the scaled value, so this implementation does worse with high- + * quality-setting files than with low-quality ones. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_IFAST_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Scaling decisions are generally the same as in the LL&M algorithm; + * see jfdctint.c for more details. However, we choose to descale + * (right shift) multiplication products as soon as they are formed, + * rather than carrying additional fractional bits into subsequent additions. + * This compromises accuracy slightly, but it lets us save a few shifts. + * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) + * everywhere except in the multiplications proper; this saves a good deal + * of work on 16-bit-int machines. + * + * Again to save a few shifts, the intermediate results between pass 1 and + * pass 2 are not upscaled, but are represented only to integral precision. + * + * A final compromise is to represent the multiplicative constants to only + * 8 fractional bits, rather than 13. This saves some shifting work on some + * machines, and may also reduce the cost of multiplication (since there + * are fewer one-bits in the constants). + */ + +#define CONST_BITS 8 + + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 8 +#define FIX_0_382683433 ((INT32) 98) /* FIX(0.382683433) */ +#define FIX_0_541196100 ((INT32) 139) /* FIX(0.541196100) */ +#define FIX_0_707106781 ((INT32) 181) /* FIX(0.707106781) */ +#define FIX_1_306562965 ((INT32) 334) /* FIX(1.306562965) */ +#else +#define FIX_0_382683433 FIX(0.382683433) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_707106781 FIX(0.707106781) +#define FIX_1_306562965 FIX(1.306562965) +#endif + + +/* We can gain a little more speed, with a further compromise in accuracy, + * by omitting the addition in a descaling shift. This yields an incorrectly + * rounded result half the time... + */ + +#ifndef USE_ACCURATE_ROUNDING +#undef DESCALE +#define DESCALE(x,n) RIGHT_SHIFT(x, n) +#endif + + +/* Multiply a DCTELEM variable by an INT32 constant, and immediately + * descale to yield a DCTELEM result. + */ + +#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) + + +/* + * Perform the forward DCT on one block of samples. + */ + +GLOBAL(void) +jpeg_fdct_ifast (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + DCTELEM tmp10, tmp11, tmp12, tmp13; + DCTELEM z1, z2, z3, z4, z5, z11, z13; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Load data into workspace */ + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp7 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp6 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp5 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + tmp4 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + /* Apply unsigned->signed conversion */ + dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */ + dataptr[4] = tmp10 - tmp11; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ + dataptr[2] = tmp13 + z1; /* phase 5 */ + dataptr[6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ + z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ + z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ + z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[5] = z13 + z2; /* phase 6 */ + dataptr[3] = z13 - z2; + dataptr[1] = z11 + z4; + dataptr[7] = z11 - z4; + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ + dataptr[DCTSIZE*4] = tmp10 - tmp11; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ + dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ + dataptr[DCTSIZE*6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ + z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ + z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ + z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ + dataptr[DCTSIZE*3] = z13 - z2; + dataptr[DCTSIZE*1] = z11 + z4; + dataptr[DCTSIZE*7] = z11 - z4; + + dataptr++; /* advance pointer to next column */ + } +} + +#endif /* DCT_IFAST_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/jfdctint.c b/src/SDL2/external/jpeg-9/jfdctint.c new file mode 100644 index 000000000..1dde58c49 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jfdctint.c @@ -0,0 +1,4348 @@ +/* + * jfdctint.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modification developed 2003-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a slow-but-accurate integer implementation of the + * forward DCT (Discrete Cosine Transform). + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on an algorithm described in + * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT + * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, + * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. + * The primary algorithm described there uses 11 multiplies and 29 adds. + * We use their alternate method with 12 multiplies and 32 adds. + * The advantage of this method is that no data path contains more than one + * multiplication; this allows a very simple and accurate implementation in + * scaled fixed-point arithmetic, with a minimal number of shifts. + * + * We also provide FDCT routines with various input sample block sizes for + * direct resolution reduction or enlargement and for direct resolving the + * common 2x1 and 1x2 subsampling cases without additional resampling: NxN + * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 output DCT block. + * + * For N<8 we fill the remaining block coefficients with zero. + * For N>8 we apply a partial N-point FDCT on the input samples, computing + * just the lower 8 frequency coefficients and discarding the rest. + * + * We must scale the output coefficients of the N-point FDCT appropriately + * to the standard 8-point FDCT level by 8/N per 1-D pass. This scaling + * is folded into the constant multipliers (pass 2) and/or final/initial + * shifting. + * + * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases + * since there would be too many additional constants to pre-calculate. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_ISLOW_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ +#endif + + +/* + * The poop on this scaling stuff is as follows: + * + * Each 1-D DCT step produces outputs which are a factor of sqrt(N) + * larger than the true DCT outputs. The final outputs are therefore + * a factor of N larger than desired; since N=8 this can be cured by + * a simple right shift at the end of the algorithm. The advantage of + * this arrangement is that we save two multiplications per 1-D DCT, + * because the y0 and y4 outputs need not be divided by sqrt(N). + * In the IJG code, this factor of 8 is removed by the quantization step + * (in jcdctmgr.c), NOT in this module. + * + * We have to do addition and subtraction of the integer inputs, which + * is no problem, and multiplication by fractional constants, which is + * a problem to do in integer arithmetic. We multiply all the constants + * by CONST_SCALE and convert them to integer constants (thus retaining + * CONST_BITS bits of precision in the constants). After doing a + * multiplication we have to divide the product by CONST_SCALE, with proper + * rounding, to produce the correct output. This division can be done + * cheaply as a right shift of CONST_BITS bits. We postpone shifting + * as long as possible so that partial sums can be added together with + * full fractional precision. + * + * The outputs of the first pass are scaled up by PASS1_BITS bits so that + * they are represented to better-than-integral precision. These outputs + * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word + * with the recommended scaling. (For 12-bit sample data, the intermediate + * array is INT32 anyway.) + * + * To avoid overflow of the 32-bit intermediate results in pass 2, we must + * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis + * shows that the values given below are the most effective. + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 13 +#define PASS1_BITS 2 +#else +#define CONST_BITS 13 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 13 +#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ +#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ +#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ +#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ +#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ +#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ +#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ +#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ +#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ +#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ +#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ +#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ +#else +#define FIX_0_298631336 FIX(0.298631336) +#define FIX_0_390180644 FIX(0.390180644) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_765366865 FIX(0.765366865) +#define FIX_0_899976223 FIX(0.899976223) +#define FIX_1_175875602 FIX(1.175875602) +#define FIX_1_501321110 FIX(1.501321110) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_1_961570560 FIX(1.961570560) +#define FIX_2_053119869 FIX(2.053119869) +#define FIX_2_562915447 FIX(2.562915447) +#define FIX_3_072711026 FIX(3.072711026) +#endif + + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * For 8-bit samples with the recommended scaling, all the variable + * and constant values involved are no more than 16 bits wide, so a + * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. + * For 12-bit samples, a full 32-bit multiplication will be needed. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MULTIPLY(var,const) MULTIPLY16C16(var,const) +#else +#define MULTIPLY(var,const) ((var) * (const)) +#endif + + +/* + * Perform the forward DCT on one block of samples. + */ + +GLOBAL(void) +jpeg_fdct_islow (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + dataptr[2] = (DCTELEM) RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), + CONST_BITS-PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) + RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) + RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + /* Add fudge factor here for final descale. */ + tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1)); + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + dataptr[DCTSIZE*2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), CONST_BITS+PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) + RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + +#ifdef DCT_SCALING_SUPPORTED + + +/* + * Perform the forward DCT on a 7x7 sample block. + */ + +GLOBAL(void) +jpeg_fdct_7x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* cK represents sqrt(2) * cos(K*pi/14). */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]); + tmp3 = GETJSAMPLE(elemptr[3]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]); + + z1 = tmp0 + tmp2; + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.353553391)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123)); /* c6 */ + dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734)); /* c4 */ + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693)); /* c3+c1-c5 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/7)**2 = 64/49, which we fold + * into the constant multipliers: + * cK now represents sqrt(2) * cos(K*pi/14) * 64/49. + */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4]; + + z1 = tmp0 + tmp2; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */ + CONST_BITS+PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.461784020)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509)); /* c4 */ + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355)); /* c3+c1-c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x6 sample block. + */ + +GLOBAL(void) +jpeg_fdct_6x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* cK represents sqrt(2) * cos(K*pi/12). */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS)); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS)); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)**2 = 16/9, which we fold + * into the constant multipliers: + * cK now represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 5x5 sample block. + */ + +GLOBAL(void) +jpeg_fdct_5x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* cK represents sqrt(2) * cos(K*pi/10). */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]); + tmp2 = GETJSAMPLE(elemptr[2]); + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << (PASS1_BITS+1)); + tmp11 = MULTIPLY(tmp11, FIX(0.790569415)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.353553391)); /* (c2-c4)/2 */ + dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS-1); + dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876)); /* c3 */ + + dataptr[1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */ + CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/5)**2 = 64/25, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * cK now represents sqrt(2) * cos(K*pi/10) * 32/25. + */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2]; + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(1.011928851)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.452548340)); /* (c2-c4)/2 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x4 sample block. + */ + +GLOBAL(void) +jpeg_fdct_4x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We must also scale the output by (8/4)**2 = 2**2, which we add here. */ + /* cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+2)); + dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+2)); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-3); + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-2); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-2); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1)); + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 3x3 sample block. + */ + +GLOBAL(void) +jpeg_fdct_3x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We scale the results further by 2**2 as part of output adaption */ + /* scaling for different DCT size. */ + /* cK represents sqrt(2) * cos(K*pi/6). */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]); + tmp1 = GETJSAMPLE(elemptr[1]); + + tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+2)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */ + CONST_BITS-PASS1_BITS-2); + + /* Odd part */ + + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(1.224744871)), /* c1 */ + CONST_BITS-PASS1_BITS-2); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/3)**2 = 64/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * cK now represents sqrt(2) * cos(K*pi/6) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1]; + + tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(2.177324216)), /* c1 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 2x2 sample block. + */ + +GLOBAL(void) +jpeg_fdct_2x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + JSAMPROW elemptr; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + + /* Row 0 */ + elemptr = sample_data[0] + start_col; + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]); + tmp1 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]); + + /* Row 1 */ + elemptr = sample_data[1] + start_col; + + tmp2 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]); + tmp3 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]); + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/2)**2 = 2**4. + */ + + /* Column 0 */ + /* Apply unsigned->signed conversion */ + data[DCTSIZE*0] = (DCTELEM) ((tmp0 + tmp2 - 4 * CENTERJSAMPLE) << 4); + data[DCTSIZE*1] = (DCTELEM) ((tmp0 - tmp2) << 4); + + /* Column 1 */ + data[DCTSIZE*0+1] = (DCTELEM) ((tmp1 + tmp3) << 4); + data[DCTSIZE*1+1] = (DCTELEM) ((tmp1 - tmp3) << 4); +} + + +/* + * Perform the forward DCT on a 1x1 sample block. + */ + +GLOBAL(void) +jpeg_fdct_1x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* We leave the result scaled up by an overall factor of 8. */ + /* We must also scale the output by (8/1)**2 = 2**6. */ + /* Apply unsigned->signed conversion */ + data[0] = (DCTELEM) + ((GETJSAMPLE(sample_data[0][start_col]) - CENTERJSAMPLE) << 6); +} + + +/* + * Perform the forward DCT on a 9x9 sample block. + */ + +GLOBAL(void) +jpeg_fdct_9x9 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2; + DCTELEM workspace[8]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* we scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* cK represents sqrt(2) * cos(K*pi/18). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[8]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[7]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[6]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[5]); + tmp4 = GETJSAMPLE(elemptr[4]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[8]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[7]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[6]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[5]); + + z1 = tmp0 + tmp2 + tmp3; + z2 = tmp1 + tmp4; + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) ((z1 + z2 - 9 * CENTERJSAMPLE) << 1); + dataptr[6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z2 - z2, FIX(0.707106781)), /* c6 */ + CONST_BITS-1); + z1 = MULTIPLY(tmp0 - tmp2, FIX(1.328926049)); /* c2 */ + z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(0.707106781)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.083350441)) /* c4 */ + + z1 + z2, CONST_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.245575608)) /* c8 */ + + z1 - z2, CONST_BITS-1); + + /* Odd part */ + + dataptr[3] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.224744871)), /* c3 */ + CONST_BITS-1); + + tmp11 = MULTIPLY(tmp11, FIX(1.224744871)); /* c3 */ + tmp0 = MULTIPLY(tmp10 + tmp12, FIX(0.909038955)); /* c5 */ + tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.483689525)); /* c7 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS-1); + + tmp2 = MULTIPLY(tmp12 - tmp13, FIX(1.392728481)); /* c1 */ + + dataptr[5] = (DCTELEM) DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 9) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/9)**2 = 64/81, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/18) * 128/81. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*0]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*7]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*6]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*5]; + tmp4 = dataptr[DCTSIZE*4]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*0]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*7]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*6]; + tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*5]; + + z1 = tmp0 + tmp2 + tmp3; + z2 = tmp1 + tmp4; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + z2, FIX(1.580246914)), /* 128/81 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z2 - z2, FIX(1.117403309)), /* c6 */ + CONST_BITS+2); + z1 = MULTIPLY(tmp0 - tmp2, FIX(2.100031287)); /* c2 */ + z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(1.117403309)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.711961190)) /* c4 */ + + z1 + z2, CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.388070096)) /* c8 */ + + z1 - z2, CONST_BITS+2); + + /* Odd part */ + + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.935399303)), /* c3 */ + CONST_BITS+2); + + tmp11 = MULTIPLY(tmp11, FIX(1.935399303)); /* c3 */ + tmp0 = MULTIPLY(tmp10 + tmp12, FIX(1.436506004)); /* c5 */ + tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.764348879)); /* c7 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS+2); + + tmp2 = MULTIPLY(tmp12 - tmp13, FIX(2.200854883)); /* c1 */ + + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 10x10 sample block. + */ + +GLOBAL(void) +jpeg_fdct_10x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM workspace[8*2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* we scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* cK represents sqrt(2) * cos(K*pi/20). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]); + tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]); + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << 1); + tmp12 += tmp12; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.437016024)), /* c8 */ + CONST_BITS-1); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)), /* c2-c6 */ + CONST_BITS-1); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)), /* c2+c6 */ + CONST_BITS-1); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << 1); + tmp2 <<= CONST_BITS; + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.642039522)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.221231742)), /* c9 */ + CONST_BITS-1); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.587785252)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) + /* (c3-c7)/2 */ + (tmp11 << (CONST_BITS - 1)) - tmp2; + dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 10) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/10)**2 = 16/25, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/20) * 32/25. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0]; + tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5]; + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */ + CONST_BITS+2); + tmp12 += tmp12; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.559380511)), /* c8 */ + CONST_BITS+2); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)), /* c2-c6 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)), /* c2+c6 */ + CONST_BITS+2); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+2); + tmp2 = MULTIPLY(tmp2, FIX(1.28)); /* 32/25 */ + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.821810588)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.283176630)), /* c9 */ + CONST_BITS+2); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.752365123)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) + /* (c3-c7)/2 */ + MULTIPLY(tmp11, FIX(0.64)) - tmp2; /* 16/25 */ + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on an 11x11 sample block. + */ + +GLOBAL(void) +jpeg_fdct_11x11 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 z1, z2, z3; + DCTELEM workspace[8*3]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* we scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* cK represents sqrt(2) * cos(K*pi/22). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[10]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[9]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[8]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[7]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[6]); + tmp5 = GETJSAMPLE(elemptr[5]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[10]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[9]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[8]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[7]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 - 11 * CENTERJSAMPLE) << 1); + tmp5 += tmp5; + tmp0 -= tmp5; + tmp1 -= tmp5; + tmp2 -= tmp5; + tmp3 -= tmp5; + tmp4 -= tmp5; + z1 = MULTIPLY(tmp0 + tmp3, FIX(1.356927976)) + /* c2 */ + MULTIPLY(tmp2 + tmp4, FIX(0.201263574)); /* c10 */ + z2 = MULTIPLY(tmp1 - tmp3, FIX(0.926112931)); /* c6 */ + z3 = MULTIPLY(tmp0 - tmp1, FIX(1.189712156)); /* c4 */ + dataptr[2] = (DCTELEM) + DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.018300590)) /* c2+c8-c6 */ + - MULTIPLY(tmp4, FIX(1.390975730)), /* c4+c10 */ + CONST_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.062335650)) /* c4-c6-c10 */ + - MULTIPLY(tmp2, FIX(1.356927976)) /* c2 */ + + MULTIPLY(tmp4, FIX(0.587485545)), /* c8 */ + CONST_BITS-1); + dataptr[6] = (DCTELEM) + DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.620527200)) /* c2+c4-c6 */ + - MULTIPLY(tmp2, FIX(0.788749120)), /* c8+c10 */ + CONST_BITS-1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.286413905)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.068791298)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.764581576)); /* c7 */ + tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.719967871)) /* c7+c5+c3-c1 */ + + MULTIPLY(tmp14, FIX(0.398430003)); /* c9 */ + tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.764581576)); /* -c7 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.399818907)); /* -c1 */ + tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.276416582)) /* c9+c7+c1-c3 */ + - MULTIPLY(tmp14, FIX(1.068791298)); /* c5 */ + tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.398430003)); /* c9 */ + tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(1.989053629)) /* c9+c5+c3-c7 */ + + MULTIPLY(tmp14, FIX(1.399818907)); /* c1 */ + tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.305598626)) /* c1+c5-c9-c7 */ + - MULTIPLY(tmp14, FIX(1.286413905)); /* c3 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-1); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-1); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 11) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/11)**2 = 64/121, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/22) * 128/121. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*1]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*0]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*7]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*6]; + tmp5 = dataptr[DCTSIZE*5]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*2]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*1]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*0]; + tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*7]; + tmp14 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5, + FIX(1.057851240)), /* 128/121 */ + CONST_BITS+2); + tmp5 += tmp5; + tmp0 -= tmp5; + tmp1 -= tmp5; + tmp2 -= tmp5; + tmp3 -= tmp5; + tmp4 -= tmp5; + z1 = MULTIPLY(tmp0 + tmp3, FIX(1.435427942)) + /* c2 */ + MULTIPLY(tmp2 + tmp4, FIX(0.212906922)); /* c10 */ + z2 = MULTIPLY(tmp1 - tmp3, FIX(0.979689713)); /* c6 */ + z3 = MULTIPLY(tmp0 - tmp1, FIX(1.258538479)); /* c4 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.077210542)) /* c2+c8-c6 */ + - MULTIPLY(tmp4, FIX(1.471445400)), /* c4+c10 */ + CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.065941844)) /* c4-c6-c10 */ + - MULTIPLY(tmp2, FIX(1.435427942)) /* c2 */ + + MULTIPLY(tmp4, FIX(0.621472312)), /* c8 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.714276708)) /* c2+c4-c6 */ + - MULTIPLY(tmp2, FIX(0.834379234)), /* c8+c10 */ + CONST_BITS+2); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.360834544)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.130622199)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.808813568)); /* c7 */ + tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.819470145)) /* c7+c5+c3-c1 */ + + MULTIPLY(tmp14, FIX(0.421479672)); /* c9 */ + tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.808813568)); /* -c7 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.480800167)); /* -c1 */ + tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.350258864)) /* c9+c7+c1-c3 */ + - MULTIPLY(tmp14, FIX(1.130622199)); /* c5 */ + tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.421479672)); /* c9 */ + tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(2.104122847)) /* c9+c5+c3-c7 */ + + MULTIPLY(tmp14, FIX(1.480800167)); /* c1 */ + tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.381129125)) /* c1+c5-c9-c7 */ + - MULTIPLY(tmp14, FIX(1.360834544)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 12x12 sample block. + */ + +GLOBAL(void) +jpeg_fdct_12x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM workspace[8*4]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + /* cK represents sqrt(2) * cos(K*pi/24). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]); + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) (tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE); + dataptr[6] = (DCTELEM) (tmp13 - tmp14 - tmp15); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */ + CONST_BITS); + dataptr[2] = (DCTELEM) + DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */ + CONST_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.184591911)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.860918669)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(1.121971054)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX_0_541196100); /* c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 12) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/12)**2 = 4/9, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/24) * 8/9. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6]; + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)), /* c4 */ + CONST_BITS+1); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) + /* 8/9 */ + MULTIPLY(tmp13 + tmp15, FIX(1.214244803)), /* c2 */ + CONST_BITS+1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200)); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102)); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502)); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.164081699)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.765261039)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(0.997307603)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 13x13 sample block. + */ + +GLOBAL(void) +jpeg_fdct_13x13 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 z1, z2; + DCTELEM workspace[8*5]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + /* cK represents sqrt(2) * cos(K*pi/26). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[12]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[11]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[10]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[9]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[8]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[7]); + tmp6 = GETJSAMPLE(elemptr[6]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[12]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[11]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[10]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[9]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[8]); + tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + (tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6 - 13 * CENTERJSAMPLE); + tmp6 += tmp6; + tmp0 -= tmp6; + tmp1 -= tmp6; + tmp2 -= tmp6; + tmp3 -= tmp6; + tmp4 -= tmp6; + tmp5 -= tmp6; + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.373119086)) + /* c2 */ + MULTIPLY(tmp1, FIX(1.058554052)) + /* c6 */ + MULTIPLY(tmp2, FIX(0.501487041)) - /* c10 */ + MULTIPLY(tmp3, FIX(0.170464608)) - /* c12 */ + MULTIPLY(tmp4, FIX(0.803364869)) - /* c8 */ + MULTIPLY(tmp5, FIX(1.252223920)), /* c4 */ + CONST_BITS); + z1 = MULTIPLY(tmp0 - tmp2, FIX(1.155388986)) - /* (c4+c6)/2 */ + MULTIPLY(tmp3 - tmp4, FIX(0.435816023)) - /* (c2-c10)/2 */ + MULTIPLY(tmp1 - tmp5, FIX(0.316450131)); /* (c8-c12)/2 */ + z2 = MULTIPLY(tmp0 + tmp2, FIX(0.096834934)) - /* (c4-c6)/2 */ + MULTIPLY(tmp3 + tmp4, FIX(0.937303064)) + /* (c2+c10)/2 */ + MULTIPLY(tmp1 + tmp5, FIX(0.486914739)); /* (c8+c12)/2 */ + + dataptr[4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.322312651)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.163874945)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.937797057)) + /* c7 */ + MULTIPLY(tmp14 + tmp15, FIX(0.338443458)); /* c11 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(tmp10, FIX(2.020082300)) + /* c3+c5+c7-c1 */ + MULTIPLY(tmp14, FIX(0.318774355)); /* c9-c11 */ + tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.937797057)) - /* c7 */ + MULTIPLY(tmp11 + tmp12, FIX(0.338443458)); /* c11 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.163874945)); /* -c5 */ + tmp1 += tmp4 + tmp5 + + MULTIPLY(tmp11, FIX(0.837223564)) - /* c5+c9+c11-c3 */ + MULTIPLY(tmp14, FIX(2.341699410)); /* c1+c7 */ + tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.657217813)); /* -c9 */ + tmp2 += tmp4 + tmp6 - + MULTIPLY(tmp12, FIX(1.572116027)) + /* c1+c5-c9-c11 */ + MULTIPLY(tmp15, FIX(2.260109708)); /* c3+c7 */ + tmp3 += tmp5 + tmp6 + + MULTIPLY(tmp13, FIX(2.205608352)) - /* c3+c5+c9-c7 */ + MULTIPLY(tmp15, FIX(1.742345811)); /* c1+c11 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 13) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/13)**2 = 64/169, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/26) * 128/169. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*2]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*1]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*0]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*7]; + tmp6 = dataptr[DCTSIZE*6]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*4]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*3]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*2]; + tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*1]; + tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*0]; + tmp15 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6, + FIX(0.757396450)), /* 128/169 */ + CONST_BITS+1); + tmp6 += tmp6; + tmp0 -= tmp6; + tmp1 -= tmp6; + tmp2 -= tmp6; + tmp3 -= tmp6; + tmp4 -= tmp6; + tmp5 -= tmp6; + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.039995521)) + /* c2 */ + MULTIPLY(tmp1, FIX(0.801745081)) + /* c6 */ + MULTIPLY(tmp2, FIX(0.379824504)) - /* c10 */ + MULTIPLY(tmp3, FIX(0.129109289)) - /* c12 */ + MULTIPLY(tmp4, FIX(0.608465700)) - /* c8 */ + MULTIPLY(tmp5, FIX(0.948429952)), /* c4 */ + CONST_BITS+1); + z1 = MULTIPLY(tmp0 - tmp2, FIX(0.875087516)) - /* (c4+c6)/2 */ + MULTIPLY(tmp3 - tmp4, FIX(0.330085509)) - /* (c2-c10)/2 */ + MULTIPLY(tmp1 - tmp5, FIX(0.239678205)); /* (c8-c12)/2 */ + z2 = MULTIPLY(tmp0 + tmp2, FIX(0.073342435)) - /* (c4-c6)/2 */ + MULTIPLY(tmp3 + tmp4, FIX(0.709910013)) + /* (c2+c10)/2 */ + MULTIPLY(tmp1 + tmp5, FIX(0.368787494)); /* (c8+c12)/2 */ + + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS+1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.001514908)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(0.881514751)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.710284161)) + /* c7 */ + MULTIPLY(tmp14 + tmp15, FIX(0.256335874)); /* c11 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(tmp10, FIX(1.530003162)) + /* c3+c5+c7-c1 */ + MULTIPLY(tmp14, FIX(0.241438564)); /* c9-c11 */ + tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.710284161)) - /* c7 */ + MULTIPLY(tmp11 + tmp12, FIX(0.256335874)); /* c11 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(0.881514751)); /* -c5 */ + tmp1 += tmp4 + tmp5 + + MULTIPLY(tmp11, FIX(0.634110155)) - /* c5+c9+c11-c3 */ + MULTIPLY(tmp14, FIX(1.773594819)); /* c1+c7 */ + tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.497774438)); /* -c9 */ + tmp2 += tmp4 + tmp6 - + MULTIPLY(tmp12, FIX(1.190715098)) + /* c1+c5-c9-c11 */ + MULTIPLY(tmp15, FIX(1.711799069)); /* c3+c7 */ + tmp3 += tmp5 + tmp6 + + MULTIPLY(tmp13, FIX(1.670519935)) - /* c3+c5+c9-c7 */ + MULTIPLY(tmp15, FIX(1.319646532)); /* c1+c11 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 14x14 sample block. + */ + +GLOBAL(void) +jpeg_fdct_14x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + DCTELEM workspace[8*6]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + /* cK represents sqrt(2) * cos(K*pi/28). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]); + tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]); + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + (tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE); + tmp13 += tmp13; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.881747734)), /* c8 */ + CONST_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686)); /* c6 */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.613604268)), /* c10 */ + CONST_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(1.378756276)), /* c2 */ + CONST_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[7] = (DCTELEM) (tmp0 - tmp10 + tmp3 - tmp11 - tmp6); + tmp3 <<= CONST_BITS; + tmp10 = MULTIPLY(tmp10, - FIX(0.158341681)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(1.405321284)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.752406978)); /* c9 */ + dataptr[5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(1.119999435)), /* c1+c11-c9 */ + CONST_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.467085129)); /* c11 */ + dataptr[3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(3.069855259)), /* c1+c5+c11 */ + CONST_BITS); + dataptr[1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + tmp6 - + MULTIPLY(tmp0 + tmp6, FIX(1.126980169)), /* c3+c5-c1 */ + CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 14) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/14)**2 = 16/49, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/28) * 32/49. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3]; + tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7]; + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+1); + tmp13 += tmp13; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.575835255)), /* c8 */ + CONST_BITS+1); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570)); /* c6 */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.400721155)), /* c10 */ + CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(0.900412262)), /* c2 */ + CONST_BITS+1); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+1); + tmp3 = MULTIPLY(tmp3 , FIX(0.653061224)); /* 32/49 */ + tmp10 = MULTIPLY(tmp10, - FIX(0.103406812)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(0.917760839)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.491367823)); /* c9 */ + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(0.731428202)), /* c1+c11-c9 */ + CONST_BITS+1); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.305035186)); /* c11 */ + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(2.004803435)), /* c1+c5+c11 */ + CONST_BITS+1); + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + - MULTIPLY(tmp0, FIX(0.735987049)) /* c3+c5-c1 */ + - MULTIPLY(tmp6, FIX(0.082925825)), /* c9-c11-c13 */ + CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 15x15 sample block. + */ + +GLOBAL(void) +jpeg_fdct_15x15 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM workspace[8*7]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + /* cK represents sqrt(2) * cos(K*pi/30). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[14]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[13]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[12]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[11]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[10]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[9]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[8]); + tmp7 = GETJSAMPLE(elemptr[7]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[14]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[13]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[12]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[11]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[10]); + tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[9]); + tmp16 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[8]); + + z1 = tmp0 + tmp4 + tmp5; + z2 = tmp1 + tmp3 + tmp6; + z3 = tmp2 + tmp7; + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) (z1 + z2 + z3 - 15 * CENTERJSAMPLE); + z3 += z3; + dataptr[6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z3, FIX(1.144122806)) - /* c6 */ + MULTIPLY(z2 - z3, FIX(0.437016024)), /* c12 */ + CONST_BITS); + tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7; + z1 = MULTIPLY(tmp3 - tmp2, FIX(1.531135173)) - /* c2+c14 */ + MULTIPLY(tmp6 - tmp2, FIX(2.238241955)); /* c4+c8 */ + z2 = MULTIPLY(tmp5 - tmp2, FIX(0.798468008)) - /* c8-c14 */ + MULTIPLY(tmp0 - tmp2, FIX(0.091361227)); /* c2-c4 */ + z3 = MULTIPLY(tmp0 - tmp3, FIX(1.383309603)) + /* c2 */ + MULTIPLY(tmp6 - tmp5, FIX(0.946293579)) + /* c8 */ + MULTIPLY(tmp1 - tmp4, FIX(0.790569415)); /* (c6+c12)/2 */ + + dataptr[2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS); + dataptr[4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS); + + /* Odd part */ + + tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16, + FIX(1.224744871)); /* c5 */ + tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.344997024)) + /* c3 */ + MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.831253876)); /* c9 */ + tmp12 = MULTIPLY(tmp12, FIX(1.224744871)); /* c5 */ + tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.406466353)) + /* c1 */ + MULTIPLY(tmp11 + tmp14, FIX(1.344997024)) + /* c3 */ + MULTIPLY(tmp13 + tmp15, FIX(0.575212477)); /* c11 */ + tmp0 = MULTIPLY(tmp13, FIX(0.475753014)) - /* c7-c11 */ + MULTIPLY(tmp14, FIX(0.513743148)) + /* c3-c9 */ + MULTIPLY(tmp16, FIX(1.700497885)) + tmp4 + tmp12; /* c1+c13 */ + tmp3 = MULTIPLY(tmp10, - FIX(0.355500862)) - /* -(c1-c7) */ + MULTIPLY(tmp11, FIX(2.176250899)) - /* c3+c9 */ + MULTIPLY(tmp15, FIX(0.869244010)) + tmp4 - tmp12; /* c11+c13 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 15) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/15)**2 = 64/225, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/30) * 256/225. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*3]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*2]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*1]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*0]; + tmp7 = dataptr[DCTSIZE*7]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*4]; + tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*3]; + tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*2]; + tmp15 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*1]; + tmp16 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*0]; + + z1 = tmp0 + tmp4 + tmp5; + z2 = tmp1 + tmp3 + tmp6; + z3 = tmp2 + tmp7; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + z2 + z3, FIX(1.137777778)), /* 256/225 */ + CONST_BITS+2); + z3 += z3; + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z3, FIX(1.301757503)) - /* c6 */ + MULTIPLY(z2 - z3, FIX(0.497227121)), /* c12 */ + CONST_BITS+2); + tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7; + z1 = MULTIPLY(tmp3 - tmp2, FIX(1.742091575)) - /* c2+c14 */ + MULTIPLY(tmp6 - tmp2, FIX(2.546621957)); /* c4+c8 */ + z2 = MULTIPLY(tmp5 - tmp2, FIX(0.908479156)) - /* c8-c14 */ + MULTIPLY(tmp0 - tmp2, FIX(0.103948774)); /* c2-c4 */ + z3 = MULTIPLY(tmp0 - tmp3, FIX(1.573898926)) + /* c2 */ + MULTIPLY(tmp6 - tmp5, FIX(1.076671805)) + /* c8 */ + MULTIPLY(tmp1 - tmp4, FIX(0.899492312)); /* (c6+c12)/2 */ + + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS+2); + + /* Odd part */ + + tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16, + FIX(1.393487498)); /* c5 */ + tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.530307725)) + /* c3 */ + MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.945782187)); /* c9 */ + tmp12 = MULTIPLY(tmp12, FIX(1.393487498)); /* c5 */ + tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.600246161)) + /* c1 */ + MULTIPLY(tmp11 + tmp14, FIX(1.530307725)) + /* c3 */ + MULTIPLY(tmp13 + tmp15, FIX(0.654463974)); /* c11 */ + tmp0 = MULTIPLY(tmp13, FIX(0.541301207)) - /* c7-c11 */ + MULTIPLY(tmp14, FIX(0.584525538)) + /* c3-c9 */ + MULTIPLY(tmp16, FIX(1.934788705)) + tmp4 + tmp12; /* c1+c13 */ + tmp3 = MULTIPLY(tmp10, - FIX(0.404480980)) - /* -(c1-c7) */ + MULTIPLY(tmp11, FIX(2.476089912)) - /* c3+c9 */ + MULTIPLY(tmp15, FIX(0.989006518)) + tmp4 - tmp12; /* c11+c13 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 16x16 sample block. + */ + +GLOBAL(void) +jpeg_fdct_16x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + DCTELEM workspace[DCTSIZE2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* cK represents sqrt(2) * cos(K*pi/32). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]); + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == DCTSIZE * 2) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/16)**2 = 1/2**2. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0]; + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS+PASS1_BITS+2); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+10 */ + CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS+PASS1_BITS+2); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 16x8 sample block. + * + * 16-point FDCT in pass 1 (rows), 8-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_16x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32). */ + + dataptr = data; + ctr = 0; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]); + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by 8/16 = 1/2. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS+1); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865), + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065), + CONST_BITS+PASS1_BITS+1); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0 + tmp10 + tmp12, + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1 + tmp11 + tmp13, + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2 + tmp11 + tmp12, + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3 + tmp10 + tmp13, + CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 14x7 sample block. + * + * 14-point FDCT in pass 1 (rows), 7-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_14x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero bottom row of output coefficient block. */ + MEMZERO(&data[DCTSIZE*7], SIZEOF(DCTELEM) * DCTSIZE); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28). */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]); + tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]); + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE) << PASS1_BITS); + tmp13 += tmp13; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.881747734)), /* c8 */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686)); /* c6 */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.613604268)), /* c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(1.378756276)), /* c2 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[7] = (DCTELEM) ((tmp0 - tmp10 + tmp3 - tmp11 - tmp6) << PASS1_BITS); + tmp3 <<= CONST_BITS; + tmp10 = MULTIPLY(tmp10, - FIX(0.158341681)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(1.405321284)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.752406978)); /* c9 */ + dataptr[5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(1.119999435)), /* c1+c11-c9 */ + CONST_BITS-PASS1_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.467085129)); /* c11 */ + dataptr[3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(3.069855259)), /* c1+c5+c11 */ + CONST_BITS-PASS1_BITS); + dataptr[1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + tmp6 - + MULTIPLY(tmp0 + tmp6, FIX(1.126980169)), /* c3+c5-c1 */ + CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/14)*(8/7) = 32/49, which we + * partially fold into the constant multipliers and final shifting: + * 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14) * 64/49. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4]; + + z1 = tmp0 + tmp2; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */ + CONST_BITS+PASS1_BITS+1); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.461784020)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS+1); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509)); /* c4 */ + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355)); /* c3+c1-c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 12x6 sample block. + * + * 12-point FDCT in pass 1 (rows), 6-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_12x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 2 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*6], SIZEOF(DCTELEM) * DCTSIZE * 2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24). */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]); + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[6] = (DCTELEM) ((tmp13 - tmp14 - tmp15) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */ + CONST_BITS-PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.184591911)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.860918669)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(1.121971054)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX_0_541196100); /* c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/12)*(8/6) = 8/9, which we + * partially fold into the constant multipliers and final shifting: + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 10x5 sample block. + * + * 10-point FDCT in pass 1 (rows), 5-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_10x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 3 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*5], SIZEOF(DCTELEM) * DCTSIZE * 3); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20). */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]); + tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]); + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << PASS1_BITS); + tmp12 += tmp12; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.437016024)), /* c8 */ + CONST_BITS-PASS1_BITS); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << PASS1_BITS); + tmp2 <<= CONST_BITS; + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.642039522)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.221231742)), /* c9 */ + CONST_BITS-PASS1_BITS); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.587785252)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) + /* (c3-c7)/2 */ + (tmp11 << (CONST_BITS - 1)) - tmp2; + dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/10)*(8/5) = 32/25, which we + * fold into the constant multipliers: + * 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10) * 32/25. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2]; + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(1.011928851)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.452548340)); /* (c2-c4)/2 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on an 8x4 sample block. + * + * 8-point FDCT in pass 1 (rows), 4-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_8x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 4 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*4], SIZEOF(DCTELEM) * DCTSIZE * 4); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We must also scale the output by 8/4 = 2, which we add here. */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << (PASS1_BITS+1)); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-2); + dataptr[2] = (DCTELEM) RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), + CONST_BITS-PASS1_BITS-1); + dataptr[6] = (DCTELEM) RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), + CONST_BITS-PASS1_BITS-1); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-2); + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS-1); + dataptr[5] = (DCTELEM) + RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS-1); + dataptr[7] = (DCTELEM) + RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * 4-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1)); + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x3 sample block. + * + * 6-point FDCT in pass 1 (rows), 3-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_6x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS-1); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << (PASS1_BITS+1))); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << (PASS1_BITS+1)); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << (PASS1_BITS+1))); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1]; + + tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(2.177324216)), /* c1 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x2 sample block. + * + * 4-point FDCT in pass 1 (rows), 2-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_4x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We must also scale the output by (8/4)*(8/2) = 2**3, which we add here. */ + /* 4-point FDCT kernel, */ + /* cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. */ + + dataptr = data; + for (ctr = 0; ctr < 2; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+3)); + dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+3)); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-4); + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-3); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-3); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = dataptr[DCTSIZE*0] + (ONE << (PASS1_BITS-1)); + tmp1 = dataptr[DCTSIZE*1]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); + + /* Odd part */ + + dataptr[DCTSIZE*1] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 2x1 sample block. + * + * 2-point FDCT in pass 1 (rows), 1-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_2x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + JSAMPROW elemptr; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + elemptr = sample_data[0] + start_col; + + tmp0 = GETJSAMPLE(elemptr[0]); + tmp1 = GETJSAMPLE(elemptr[1]); + + /* We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/2)*(8/1) = 2**5. + */ + + /* Even part */ + /* Apply unsigned->signed conversion */ + data[0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5); + + /* Odd part */ + data[1] = (DCTELEM) ((tmp0 - tmp1) << 5); +} + + +/* + * Perform the forward DCT on an 8x16 sample block. + * + * 8-point FDCT in pass 1 (rows), 16-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_8x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + INT32 z1; + DCTELEM workspace[DCTSIZE2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865), + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065), + CONST_BITS-PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[1] = (DCTELEM) DESCALE(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == DCTSIZE * 2) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by 8/16 = 1/2. + * 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0]; + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS+PASS1_BITS+1); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 7x14 sample block. + * + * 7-point FDCT in pass 1 (rows), 14-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_7x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM workspace[8*6]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]); + tmp3 = GETJSAMPLE(elemptr[3]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]); + + z1 = tmp0 + tmp2; + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.353553391)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123)); /* c6 */ + dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734)); /* c4 */ + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693)); /* c3+c1-c5 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 14) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/7)*(8/14) = 32/49, which we + * fold into the constant multipliers: + * 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28) * 32/49. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3]; + tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7]; + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+PASS1_BITS); + tmp13 += tmp13; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.575835255)), /* c8 */ + CONST_BITS+PASS1_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570)); /* c6 */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.400721155)), /* c10 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(0.900412262)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+PASS1_BITS); + tmp3 = MULTIPLY(tmp3 , FIX(0.653061224)); /* 32/49 */ + tmp10 = MULTIPLY(tmp10, - FIX(0.103406812)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(0.917760839)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.491367823)); /* c9 */ + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(0.731428202)), /* c1+c11-c9 */ + CONST_BITS+PASS1_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.305035186)); /* c11 */ + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(2.004803435)), /* c1+c5+c11 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + - MULTIPLY(tmp0, FIX(0.735987049)) /* c3+c5-c1 */ + - MULTIPLY(tmp6, FIX(0.082925825)), /* c9-c11-c13 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x12 sample block. + * + * 6-point FDCT in pass 1 (rows), 12-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_6x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM workspace[8*4]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS)); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS)); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 12) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/12) = 8/9, which we + * fold into the constant multipliers: + * 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24) * 8/9. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6]; + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)), /* c4 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) + /* 8/9 */ + MULTIPLY(tmp13 + tmp15, FIX(1.214244803)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200)); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102)); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502)); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.164081699)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.765261039)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(0.997307603)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 5x10 sample block. + * + * 5-point FDCT in pass 1 (rows), 10-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_5x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM workspace[8*2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]); + tmp2 = GETJSAMPLE(elemptr[2]); + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(0.790569415)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.353553391)); /* (c2-c4)/2 */ + dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876)); /* c3 */ + + dataptr[1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */ + CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */ + CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 10) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/5)*(8/10) = 32/25, which we + * fold into the constant multipliers: + * 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20) * 32/25. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0]; + tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5]; + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp12 += tmp12; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.559380511)), /* c8 */ + CONST_BITS+PASS1_BITS); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp2 = MULTIPLY(tmp2, FIX(1.28)); /* 32/25 */ + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.821810588)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.283176630)), /* c9 */ + CONST_BITS+PASS1_BITS); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.752365123)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) + /* (c3-c7)/2 */ + MULTIPLY(tmp11, FIX(0.64)) - tmp2; /* 16/25 */ + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x8 sample block. + * + * 4-point FDCT in pass 1 (rows), 8-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_4x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We must also scale the output by 8/4 = 2, which we add here. */ + /* 4-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+1)); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-2); + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + /* Add fudge factor here for final descale. */ + tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1)); + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + dataptr[DCTSIZE*2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), CONST_BITS+PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) + RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 3x6 sample block. + * + * 3-point FDCT in pass 1 (rows), 6-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_3x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6). */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]); + tmp1 = GETJSAMPLE(elemptr[1]); + + tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */ + CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(1.224744871)), /* c1 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 2x4 sample block. + * + * 2-point FDCT in pass 1 (rows), 4-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_2x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + /* We must also scale the output by (8/2)*(8/4) = 2**3, which we add here. */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]); + tmp1 = GETJSAMPLE(elemptr[1]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 3); + + /* Odd part */ + + dataptr[1] = (DCTELEM) ((tmp0 - tmp1) << 3); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * 4-point FDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = 0; ctr < 2; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) (tmp0 + tmp1); + dataptr[DCTSIZE*2] = (DCTELEM) (tmp0 - tmp1); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 1x2 sample block. + * + * 1-point FDCT in pass 1 (rows), 2-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_1x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + tmp0 = GETJSAMPLE(sample_data[0][start_col]); + tmp1 = GETJSAMPLE(sample_data[1][start_col]); + + /* We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/1)*(8/2) = 2**5. + */ + + /* Even part */ + /* Apply unsigned->signed conversion */ + data[DCTSIZE*0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5); + + /* Odd part */ + data[DCTSIZE*1] = (DCTELEM) ((tmp0 - tmp1) << 5); +} + +#endif /* DCT_SCALING_SUPPORTED */ +#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/jidctflt.c b/src/SDL2/external/jpeg-9/jidctflt.c new file mode 100644 index 000000000..23ae9d333 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jidctflt.c @@ -0,0 +1,235 @@ +/* + * jidctflt.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2010 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a floating-point implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * This implementation should be more accurate than either of the integer + * IDCT implementations. However, it may not give the same results on all + * machines because of differences in roundoff behavior. Speed will depend + * on the hardware's floating point capacity. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with a fixed-point + * implementation, accuracy is lost due to imprecise representation of the + * scaled quantization values. However, that problem does not arise if + * we use floating point arithmetic. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_FLOAT_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce a float result. + */ + +#define DEQUANTIZE(coef,quantval) (((FAST_FLOAT) (coef)) * (quantval)) + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + */ + +GLOBAL(void) +jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + FAST_FLOAT tmp10, tmp11, tmp12, tmp13; + FAST_FLOAT z5, z10, z11, z12, z13; + JCOEFPTR inptr; + FLOAT_MULT_TYPE * quantptr; + FAST_FLOAT * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = cinfo->sample_range_limit; + int ctr; + FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */ + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (FLOAT_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = tmp0 + tmp2; /* phase 3 */ + tmp11 = tmp0 - tmp2; + + tmp13 = tmp1 + tmp3; /* phases 5-3 */ + tmp12 = (tmp1 - tmp3) * ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */ + + tmp0 = tmp10 + tmp13; /* phase 2 */ + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z13 = tmp6 + tmp5; /* phase 6 */ + z10 = tmp6 - tmp5; + z11 = tmp4 + tmp7; + z12 = tmp4 - tmp7; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */ + + z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ + tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */ + tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 - tmp5; + + wsptr[DCTSIZE*0] = tmp0 + tmp7; + wsptr[DCTSIZE*7] = tmp0 - tmp7; + wsptr[DCTSIZE*1] = tmp1 + tmp6; + wsptr[DCTSIZE*6] = tmp1 - tmp6; + wsptr[DCTSIZE*2] = tmp2 + tmp5; + wsptr[DCTSIZE*5] = tmp2 - tmp5; + wsptr[DCTSIZE*3] = tmp3 + tmp4; + wsptr[DCTSIZE*4] = tmp3 - tmp4; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * And testing floats for zero is relatively expensive, so we don't bother. + */ + + /* Even part */ + + /* Apply signed->unsigned and prepare float->int conversion */ + z5 = wsptr[0] + ((FAST_FLOAT) CENTERJSAMPLE + (FAST_FLOAT) 0.5); + tmp10 = z5 + wsptr[4]; + tmp11 = z5 - wsptr[4]; + + tmp13 = wsptr[2] + wsptr[6]; + tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13; + + tmp0 = tmp10 + tmp13; + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + z13 = wsptr[5] + wsptr[3]; + z10 = wsptr[5] - wsptr[3]; + z11 = wsptr[1] + wsptr[7]; + z12 = wsptr[1] - wsptr[7]; + + tmp7 = z11 + z13; + tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); + + z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ + tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */ + tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 - tmp5; + + /* Final output stage: float->int conversion and range-limit */ + + outptr[0] = range_limit[((int) (tmp0 + tmp7)) & RANGE_MASK]; + outptr[7] = range_limit[((int) (tmp0 - tmp7)) & RANGE_MASK]; + outptr[1] = range_limit[((int) (tmp1 + tmp6)) & RANGE_MASK]; + outptr[6] = range_limit[((int) (tmp1 - tmp6)) & RANGE_MASK]; + outptr[2] = range_limit[((int) (tmp2 + tmp5)) & RANGE_MASK]; + outptr[5] = range_limit[((int) (tmp2 - tmp5)) & RANGE_MASK]; + outptr[3] = range_limit[((int) (tmp3 + tmp4)) & RANGE_MASK]; + outptr[4] = range_limit[((int) (tmp3 - tmp4)) & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/jidctfst.S b/src/SDL2/external/jpeg-9/jidctfst.S new file mode 100644 index 000000000..b35f938a5 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jidctfst.S @@ -0,0 +1,476 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include + + .text + .align + + .global jpeg_idct_ifast + .func jpeg_idct_ifast + +// NOTE: sb=r9, fp=r11 ip=r12, sp=r13, lr=r14, pc=r15 + +// jpeg_idct_ifast (j_decompress_ptr cinfo, +// jpeg_component_info * compptr, +// short* coef_block, +// unsigned char* output_buf, +// int output_col) + +#define local_TMP0123 sp +#define local_TMP0 [sp, #0] +#define local_TMP1 [sp, #4] +#define local_TMP2 [sp, #8] +#define local_TMP3 [sp, #12] +#define local_RANGE_TABLE [sp, #16] +#define local_OUTPUT_COL [sp, #20] +#define local_OUTPUT_BUF [sp, #24] +#define local_UNUSED [sp, #28] +#define off_WORKSPACE 32 +#define local_WORKSPACE [sp, #offWORKSPACE] +#define local_SIZE (off_WORKSPACE + 8*8*4) + +#define off_DECOMPRESS_range_limit_base 324 +#define off_COMPINFO_quanttable 80 + +#define DCTSIZE 8 +#define VY(x) ((x)*DCTSIZE*2) +#define QY(x) ((x)*DCTSIZE*4) + +#define VX(x) ((x)*2) +#define QX(x) ((x)*4) + +#define FIX_1_414213562 #362 +#define FIX_1_082392200 #277 +#define FIX_1_847759065 #473 +#define FIX_2_613125930 #669 + +#define RANGE_MASK 1023 + + + +jpeg_idct_ifast: + PLD [r2, #0] + stmdb sp!, {r4,r5, r6,r7, r8,r9, r10,r11, r12,lr} + ldr r4, [sp, #4*10] + sub sp, #local_SIZE + + ldr r10,[r1, #off_COMPINFO_quanttable] // r10 = quanttable + str r4, local_OUTPUT_COL + str r3, local_OUTPUT_BUF + ldr r5, [r0, #off_DECOMPRESS_range_limit_base] + add r5, r5, #128 + str r5, local_RANGE_TABLE + mov fp, r2 // fp = coef_block + add ip, sp, #off_WORKSPACE + +VLoopTail: + ldrsh r0, [fp, #VY(0)] + ldrsh r1, [fp, #VY(1)] + ldrsh r2, [fp, #VY(2)] + ldrsh r3, [fp, #VY(3)] + ldrsh r4, [fp, #VY(4)] + ldrsh r5, [fp, #VY(5)] + ldrsh r6, [fp, #VY(6)] + ldrsh r7, [fp, #VY(7)] + + cmp r1, #0 + orreqs r8, r2, r3 + orreqs r8, r4, r5 + orreqs r8, r6, r7 + beq VLoopHeadZero + +VLoopHead: + // tmp0 = DEQUANTIZE(in[DCTSIZE*0], quant[DCTSIZE*0] (r0) + // tmp2 = DEQUANTIZE(in[DCTSIZE*4], quant[DCTSIZE*4] (r4) + // tmp1 = DEQUANTIZE(in[DCTSIZE*2], quant[DCTSIZE*2] (r2) + // tmp3 = DEQUANTIZE(in[DCTSIZE*6], quant[DCTSIZE*6] (r6) + // tmp10 = tmp0 + tmp2 (r0) + // tmp11 = tmp0 - tmp2 (r4) + + ldr r9, [r10, #QY(4)] + ldr r8, [r10, #QY(0)] +#if __ARM_HAVE_HALFWORD_MULTIPLY + smulbb r4, r9, r4 + smlabb r0, r8, r0, r4 +#else + mul r4, r9, r4 + mul r0, r8, r0 + add r0, r4 +#endif + ldr r9, [r10, #QY(6)] + ldr r8, [r10, #QY(2)] + sub r4, r0, r4, lsl #1 +#if __ARM_HAVE_HALFWORD_MULTIPLY + smulbb r6, r9, r6 + smlabb r2, r8, r2, r6 +#else + mul r6, r9, r6 + mul r2, r8, r2 + add r2, r6 +#endif + + // tmp13 = tmp1 + tmp3 (r2) + // tmp12 = MULTIPLY(tmp1 - tmp3, FIX_1_414213562) - tmp13 (r6) + // FIX_1_4142... = 362 = 45*8 + 2 + sub r6, r2, r6, lsl #1 + mov r8, #360 + add r8, r8, #2 + mul r9, r6, r8 + + // tmp0 = tmp10 + tmp13; (r0) + // tmp3 = tmp10 - tmp13; (r8) + // tmp1 = tmp11 + tmp12; (r4) + // tmp2 = tmp11 - tmp12; (r6) + add r0, r0, r2 + rsb r6, r2, r9, asr #8 + sub r8, r0, r2, lsl #1 + add r4, r4, r6 + sub r6, r4, r6, lsl #1 + + stmia local_TMP0123, {r0, r4, r6, r8} + + // NOTE: be sure to not user r0,r4,r6,r8 soon after stm above + + // odd part + // tmp4 = DEQUANTIZE( in[DCTSIZE*1], quant[DCTSIZE*1] ) (r1) + // tmp6 = DEQUANTIZE( in[DCTSIZE*5], quant[DCTSIZE*5] ) (r5) + // tmp5 = DEQUANTIZE( in[DCTSIZE*3], quant[DCTSIZE*3] ) (r3) + // tmp7 = DEQUANTIZE( in[DCTSIZE*7], quant[DCTSIZE*7] ) (r7) + // z13 = tmp6 + tmp5; (r0) + // z10 = tmp6 - tmp5; (r2) + // z11 = tmp4 + tmp7; (r4) + // z12 = tmp4 - tmp7; (r6) + + ldr r2, [r10, #QY(1)] + ldr r9, [r10, #QY(5)] +#if __ARM_HAVE_HALFWORD_MULTIPLY + smulbb r1, r2, r1 +#else + mul r1, r2, r1 +#endif + ldr r2, [r10, #QY(3)] +#if __ARM_HAVE_HALFWORD_MULTIPLY + smulbb r5, r9, r5 +#else + mul r5, r9, r5 +#endif + ldr r9, [r10, #QY(7)] +#if __ARM_HAVE_HALFWORD_MULTIPLY + smlabb r0, r2, r3, r5 + smlabb r4, r9, r7, r1 +#else + mul r0, r2, r3 + add r0, r5 + mul r4, r9, r7 + add r4, r1 +#endif + rsb r2, r0, r5, lsl #1 + rsb r6, r4, r1, lsl #1 + + // tmp7 = z11 + z13; (r7) + // tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); (r1) + // FIX_... = 360 + 2 + add r7, r4, r0 + sub r1, r4, r0 + mov r8, #360 + add r8, r8, #2 + mul r1, r8, r1 + + // z5 = MULTIPLY(z10 + z12, FIX_1_847759065); (r8) + // tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; (r0) + // tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; (r2) + // FIX_1_8477... = 473 = 472 + 1 + // FIX_1_082... = 277 = 276 + 1 + // FIX_2_... = 669 = 668 + 1 + add r8, r2, r6 + mov r9, #472 + mla r8, r9, r8, r8 + mov r9, #276 + mla r0, r6, r9, r6 + mov r9, #668 + mla r2, r9, r2, r2 + sub r0, r0, r8 + rsb r2, r2, r8 + + // tmp6 = tmp12 - tmp7; (r6) + // tmp5 = tmp11 - tmp6; (r5) + // tmp4 = tmp10 + tmp5; (r4) + rsb r6, r7, r2, asr #8 + rsb r5, r6, r1, asr #8 + add r4, r5, r0, asr #8 + + ldmia local_TMP0123, {r0, r1, r2, r3} + + // wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7); + // wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7); + // wsptr[DCTSIZE*1] = (int) (tmp1 + tmp6); + // wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6); + // wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5); + // wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5); + // wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4); + // wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4); + + add r0, r0, r7 + sub r7, r0, r7, lsl #1 + add r1, r1, r6 + sub r6, r1, r6, lsl #1 + add r2, r2, r5 + sub r5, r2, r5, lsl #1 + sub r3, r3, r4 + add r4, r3, r4, lsl #1 + + str r0, [ip, #QY(0)] + str r1, [ip, #QY(1)] + str r2, [ip, #QY(2)] + str r3, [ip, #QY(3)] + str r4, [ip, #QY(4)] + str r5, [ip, #QY(5)] + str r6, [ip, #QY(6)] + str r7, [ip, #QY(7)] + + // inptr++; /* advance pointers to next column */ + // quantptr++; + // wsptr++; + add fp, fp, #2 + add r10, r10, #4 + add ip, ip, #4 + add r0, sp, #(off_WORKSPACE + 4*8) + cmp ip, r0 + bne VLoopTail + + + +HLoopStart: + // reset pointers + PLD [sp, #off_WORKSPACE] + add ip, sp, #off_WORKSPACE + ldr r10, local_RANGE_TABLE + +HLoopTail: + // output = *output_buf++ + output_col + ldr r0, local_OUTPUT_BUF + ldr r1, local_OUTPUT_COL + ldr r2, [r0], #4 + str r0, local_OUTPUT_BUF + add fp, r2, r1 + + PLD [ip, #32] + ldmia ip!, {r0-r7} + + cmp r1, #0 + orreqs r8, r2, r3 + orreqs r8, r4, r5 + orreqs r8, r6, r7 + beq HLoopTailZero + +HLoopHead: + // tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]); (r0) + // tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]); (r4) + add r0, r0, r4 + sub r4, r0, r4, lsl #1 + + // tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]); (r2) + // tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562) - tmp13; (r6) + // FIX_... = 360 + 2 + add r2, r2, r6 + sub r6, r2, r6, lsl #1 + mov r8, #360 + add r8, r8, #2 + mul r6, r8, r6 + + // tmp0 = tmp10 + tmp13; (r0) + // tmp3 = tmp10 - tmp13; (r8) + // tmp1 = tmp11 + tmp12; (r4) + // tmp2 = tmp11 - tmp12; (r6) + add r0, r0, r2 + rsb r6, r2, r6, asr #8 + sub r8, r0, r2, lsl #1 + add r4, r4, r6 + sub r6, r4, r6, lsl #1 + + stmia local_TMP0123, {r0, r4, r6, r8} + + // Odd part + + // z13 = (DCTELEM) wsptr[5] + (DCTELEM) wsptr[3]; (r0) + // z10 = (DCTELEM) wsptr[5] - (DCTELEM) wsptr[3]; (r2) + // z11 = (DCTELEM) wsptr[1] + (DCTELEM) wsptr[7]; (r4) + // z12 = (DCTELEM) wsptr[1] - (DCTELEM) wsptr[7]; (r6) + add r0, r5, r3 + sub r2, r5, r3 + add r4, r1, r7 + sub r6, r1, r7 + + // tmp7 = z11 + z13; (r7) + // tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); (r1) + // FIX_... = 360 + 2 + add r7, r4, r0 + sub r1, r4, r0 + mov r8, #360 + add r8, r8, #2 + mul r1, r8, r1 + + // z5 = MULTIPLY(z10 + z12, FIX_1_847759065); (r8) + // tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; (r0) + // tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; (r2) + // FIX_1_8477... = 473 = 472 + 1 + // FIX_1_082... = 277 = 276 + 1 + // FIX_2_... = 669 = 668 + 1 + add r8, r2, r6 + mov r9, #472 + mla r8, r9, r8, r8 + mov r9, #276 + mla r0, r6, r9, r6 + mov r9, #668 + mla r2, r9, r2, r2 + sub r0, r0, r8 + sub r2, r8, r2 + + // tmp6 = tmp12 - tmp7; (r6) + // tmp5 = tmp11 - tmp6; (r5) + // tmp4 = tmp10 + tmp5; (r4) + rsb r6, r7, r2, asr #8 + rsb r5, r6, r1, asr #8 + add r4, r5, r0, asr #8 + + ldmia local_TMP0123, {r0, r1, r2, r3} + + // outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3) & RANGE_MASK]; + // outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3) & RANGE_MASK]; + // outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3) & RANGE_MASK]; + // outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3) & RANGE_MASK]; + // outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3) & RANGE_MASK]; + // outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3) & RANGE_MASK]; + // outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3) & RANGE_MASK]; + // outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3) & RANGE_MASK]; + + mov r8, #128 + add r0, r0, r7 + sub r7, r0, r7, lsl #1 + add r0, r8, r0, asr #5 + add r7, r8, r7, asr #5 + add r1, r1, r6 + sub r6, r1, r6, lsl #1 + add r1, r8, r1, asr #5 + add r6, r8, r6, asr #5 + add r2, r2, r5 + sub r5, r2, r5, lsl #1 + add r2, r8, r2, asr #5 + add r5, r8, r5, asr #5 + sub r3, r3, r4 + add r4, r3, r4, lsl #1 + add r3, r8, r3, asr #5 + add r4, r8, r4, asr #5 + +#if __ARM_ARCH__ >= 6 + usat r0, #8, r0 + usat r1, #8, r1 + usat r2, #8, r2 + usat r3, #8, r3 + usat r4, #8, r4 + usat r5, #8, r5 + usat r6, #8, r6 + usat r7, #8, r7 +#else + cmp r0, #255 + mvnhi r0, r0, asr #31 + andhi r0, #255 + cmp r7, #255 + mvnhi r7, r7, asr #31 + cmp r1, #255 + mvnhi r1, r1, asr #31 + andhi r1, #255 + cmp r6, #255 + mvnhi r6, r6, asr #31 + andhi r6, #255 + cmp r2, #255 + mvnhi r2, r2, asr #31 + andhi r2, #255 + cmp r5, #255 + mvnhi r5, r5, asr #31 + andhi r5, #255 + cmp r3, #255 + mvnhi r3, r3, asr #31 + cmp r4, #255 + mvnhi r4, r4, asr #31 + andhi r4, #255 +#endif + + // r3 r2 r1 r0 + orr r0, r0, r1, lsl #8 + orr r0, r0, r2, lsl #16 + orr r0, r0, r3, lsl #24 + + // r7 r6 r5 r4 + orr r1, r4, r5, lsl #8 + orr r1, r1, r6, lsl #16 + orr r1, r1, r7, lsl #24 + stmia fp, {r0, r1} + + add r0, sp, #(off_WORKSPACE + 8*8*4) + cmp ip, r0 + bne HLoopTail + +Exit: + add sp, sp, #local_SIZE + ldmia sp!, {r4,r5, r6,r7, r8,r9, r10,r11, r12,lr} + bx lr + + +VLoopHeadZero: +// ok, all AC coefficients are 0 + ldr r1, [r10, #QY(0)] + add fp, fp, #2 + add r10, r10, #4 + mul r0, r1, r0 + str r0, [ip, #QY(0)] + str r0, [ip, #QY(1)] + str r0, [ip, #QY(2)] + str r0, [ip, #QY(3)] + str r0, [ip, #QY(4)] + str r0, [ip, #QY(5)] + str r0, [ip, #QY(6)] + str r0, [ip, #QY(7)] + add ip, ip, #4 + add r0, sp, #(off_WORKSPACE + 4*8) + cmp ip, r0 + beq HLoopStart + b VLoopTail + +HLoopTailZero: + mov r0, r0, asr #5 + add r0, #128 + +#if __ARM_ARCH__ >= 6 + usat r0, #8, r0 +#else + cmp r0, #255 + mvnhi r0, r0, asr #31 + andhi r0, r0, #255 +#endif + + orr r0, r0, lsl #8 + orr r0, r0, lsl #16 + mov r1, r0 + stmia fp, {r0, r1} + + add r0, sp, #(off_WORKSPACE + 64*4) + cmp ip, r0 + beq Exit + b HLoopTail + + .endfunc diff --git a/src/SDL2/external/jpeg-9/jidctfst.c b/src/SDL2/external/jpeg-9/jidctfst.c new file mode 100644 index 000000000..dba4216fb --- /dev/null +++ b/src/SDL2/external/jpeg-9/jidctfst.c @@ -0,0 +1,368 @@ +/* + * jidctfst.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a fast, not so accurate integer implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with fixed-point math, + * accuracy is lost due to imprecise representation of the scaled + * quantization values. The smaller the quantization table entry, the less + * precise the scaled value, so this implementation does worse with high- + * quality-setting files than with low-quality ones. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_IFAST_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Scaling decisions are generally the same as in the LL&M algorithm; + * see jidctint.c for more details. However, we choose to descale + * (right shift) multiplication products as soon as they are formed, + * rather than carrying additional fractional bits into subsequent additions. + * This compromises accuracy slightly, but it lets us save a few shifts. + * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) + * everywhere except in the multiplications proper; this saves a good deal + * of work on 16-bit-int machines. + * + * The dequantized coefficients are not integers because the AA&N scaling + * factors have been incorporated. We represent them scaled up by PASS1_BITS, + * so that the first and second IDCT rounds have the same input scaling. + * For 8-bit JSAMPLEs, we choose IFAST_SCALE_BITS = PASS1_BITS so as to + * avoid a descaling shift; this compromises accuracy rather drastically + * for small quantization table entries, but it saves a lot of shifts. + * For 12-bit JSAMPLEs, there's no hope of using 16x16 multiplies anyway, + * so we use a much larger scaling factor to preserve accuracy. + * + * A final compromise is to represent the multiplicative constants to only + * 8 fractional bits, rather than 13. This saves some shifting work on some + * machines, and may also reduce the cost of multiplication (since there + * are fewer one-bits in the constants). + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 8 +#define PASS1_BITS 2 +#else +#define CONST_BITS 8 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 8 +#define FIX_1_082392200 ((INT32) 277) /* FIX(1.082392200) */ +#define FIX_1_414213562 ((INT32) 362) /* FIX(1.414213562) */ +#define FIX_1_847759065 ((INT32) 473) /* FIX(1.847759065) */ +#define FIX_2_613125930 ((INT32) 669) /* FIX(2.613125930) */ +#else +#define FIX_1_082392200 FIX(1.082392200) +#define FIX_1_414213562 FIX(1.414213562) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_2_613125930 FIX(2.613125930) +#endif + + +/* We can gain a little more speed, with a further compromise in accuracy, + * by omitting the addition in a descaling shift. This yields an incorrectly + * rounded result half the time... + */ + +#ifndef USE_ACCURATE_ROUNDING +#undef DESCALE +#define DESCALE(x,n) RIGHT_SHIFT(x, n) +#endif + + +/* Multiply a DCTELEM variable by an INT32 constant, and immediately + * descale to yield a DCTELEM result. + */ + +#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce a DCTELEM result. For 8-bit data a 16x16->16 + * multiplication will do. For 12-bit data, the multiplier table is + * declared INT32, so a 32-bit multiply will be used. + */ + +#if BITS_IN_JSAMPLE == 8 +#define DEQUANTIZE(coef,quantval) (((IFAST_MULT_TYPE) (coef)) * (quantval)) +#else +#define DEQUANTIZE(coef,quantval) \ + DESCALE((coef)*(quantval), IFAST_SCALE_BITS-PASS1_BITS) +#endif + + +/* Like DESCALE, but applies to a DCTELEM and produces an int. + * We assume that int right shift is unsigned if INT32 right shift is. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS DCTELEM ishift_temp; +#if BITS_IN_JSAMPLE == 8 +#define DCTELEMBITS 16 /* DCTELEM may be 16 or 32 bits */ +#else +#define DCTELEMBITS 32 /* DCTELEM must be 32 bits */ +#endif +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + +#ifdef USE_ACCURATE_ROUNDING +#define IDESCALE(x,n) ((int) IRIGHT_SHIFT((x) + (1 << ((n)-1)), n)) +#else +#define IDESCALE(x,n) ((int) IRIGHT_SHIFT(x, n)) +#endif + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + */ + +GLOBAL(void) +jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + DCTELEM tmp10, tmp11, tmp12, tmp13; + DCTELEM z5, z10, z11, z12, z13; + JCOEFPTR inptr; + IFAST_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[DCTSIZE2]; /* buffers data between passes */ + SHIFT_TEMPS /* for DESCALE */ + ISHIFT_TEMPS /* for IDESCALE */ + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (IFAST_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = (int) DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = tmp0 + tmp2; /* phase 3 */ + tmp11 = tmp0 - tmp2; + + tmp13 = tmp1 + tmp3; /* phases 5-3 */ + tmp12 = MULTIPLY(tmp1 - tmp3, FIX_1_414213562) - tmp13; /* 2*c4 */ + + tmp0 = tmp10 + tmp13; /* phase 2 */ + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z13 = tmp6 + tmp5; /* phase 6 */ + z10 = tmp6 - tmp5; + z11 = tmp4 + tmp7; + z12 = tmp4 - tmp7; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ + + z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ + tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ + tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 + tmp5; + + wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7); + wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7); + wsptr[DCTSIZE*1] = (int) (tmp1 + tmp6); + wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6); + wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5); + wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5); + wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4); + wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3, */ + /* and also undo the PASS1_BITS scaling. */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * On machines with very fast multiplication, it's possible that the + * test takes more time than it's worth. In that case this section + * may be commented out. + */ + +#ifndef NO_ZERO_ROW_TEST + if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && + wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { + /* AC terms all zero */ + JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3) + & RANGE_MASK]; + + outptr[0] = dcval; + outptr[1] = dcval; + outptr[2] = dcval; + outptr[3] = dcval; + outptr[4] = dcval; + outptr[5] = dcval; + outptr[6] = dcval; + outptr[7] = dcval; + + wsptr += DCTSIZE; /* advance pointer to next row */ + continue; + } +#endif + + /* Even part */ + + tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]); + tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]); + + tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]); + tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562) + - tmp13; + + tmp0 = tmp10 + tmp13; + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + z13 = (DCTELEM) wsptr[5] + (DCTELEM) wsptr[3]; + z10 = (DCTELEM) wsptr[5] - (DCTELEM) wsptr[3]; + z11 = (DCTELEM) wsptr[1] + (DCTELEM) wsptr[7]; + z12 = (DCTELEM) wsptr[1] - (DCTELEM) wsptr[7]; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ + + z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ + tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ + tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 + tmp5; + + /* Final output stage: scale down by a factor of 8 and range-limit */ + + outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#endif /* DCT_IFAST_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/jidctint.c b/src/SDL2/external/jpeg-9/jidctint.c new file mode 100644 index 000000000..dcdf7ce45 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jidctint.c @@ -0,0 +1,5137 @@ +/* + * jidctint.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modification developed 2002-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a slow-but-accurate integer implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on an algorithm described in + * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT + * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, + * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. + * The primary algorithm described there uses 11 multiplies and 29 adds. + * We use their alternate method with 12 multiplies and 32 adds. + * The advantage of this method is that no data path contains more than one + * multiplication; this allows a very simple and accurate implementation in + * scaled fixed-point arithmetic, with a minimal number of shifts. + * + * We also provide IDCT routines with various output sample block sizes for + * direct resolution reduction or enlargement and for direct resolving the + * common 2x1 and 1x2 subsampling cases without additional resampling: NxN + * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 input DCT block. + * + * For N<8 we simply take the corresponding low-frequency coefficients of + * the 8x8 input DCT block and apply an NxN point IDCT on the sub-block + * to yield the downscaled outputs. + * This can be seen as direct low-pass downsampling from the DCT domain + * point of view rather than the usual spatial domain point of view, + * yielding significant computational savings and results at least + * as good as common bilinear (averaging) spatial downsampling. + * + * For N>8 we apply a partial NxN IDCT on the 8 input coefficients as + * lower frequencies and higher frequencies assumed to be zero. + * It turns out that the computational effort is similar to the 8x8 IDCT + * regarding the output size. + * Furthermore, the scaling and descaling is the same for all IDCT sizes. + * + * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases + * since there would be too many additional constants to pre-calculate. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_ISLOW_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ +#endif + + +/* + * The poop on this scaling stuff is as follows: + * + * Each 1-D IDCT step produces outputs which are a factor of sqrt(N) + * larger than the true IDCT outputs. The final outputs are therefore + * a factor of N larger than desired; since N=8 this can be cured by + * a simple right shift at the end of the algorithm. The advantage of + * this arrangement is that we save two multiplications per 1-D IDCT, + * because the y0 and y4 inputs need not be divided by sqrt(N). + * + * We have to do addition and subtraction of the integer inputs, which + * is no problem, and multiplication by fractional constants, which is + * a problem to do in integer arithmetic. We multiply all the constants + * by CONST_SCALE and convert them to integer constants (thus retaining + * CONST_BITS bits of precision in the constants). After doing a + * multiplication we have to divide the product by CONST_SCALE, with proper + * rounding, to produce the correct output. This division can be done + * cheaply as a right shift of CONST_BITS bits. We postpone shifting + * as long as possible so that partial sums can be added together with + * full fractional precision. + * + * The outputs of the first pass are scaled up by PASS1_BITS bits so that + * they are represented to better-than-integral precision. These outputs + * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word + * with the recommended scaling. (To scale up 12-bit sample data further, an + * intermediate INT32 array would be needed.) + * + * To avoid overflow of the 32-bit intermediate results in pass 2, we must + * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis + * shows that the values given below are the most effective. + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 13 +#define PASS1_BITS 2 +#else +#define CONST_BITS 13 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 13 +#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ +#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ +#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ +#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ +#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ +#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ +#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ +#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ +#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ +#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ +#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ +#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ +#else +#define FIX_0_298631336 FIX(0.298631336) +#define FIX_0_390180644 FIX(0.390180644) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_765366865 FIX(0.765366865) +#define FIX_0_899976223 FIX(0.899976223) +#define FIX_1_175875602 FIX(1.175875602) +#define FIX_1_501321110 FIX(1.501321110) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_1_961570560 FIX(1.961570560) +#define FIX_2_053119869 FIX(2.053119869) +#define FIX_2_562915447 FIX(2.562915447) +#define FIX_3_072711026 FIX(3.072711026) +#endif + + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * For 8-bit samples with the recommended scaling, all the variable + * and constant values involved are no more than 16 bits wide, so a + * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. + * For 12-bit samples, a full 32-bit multiplication will be needed. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MULTIPLY(var,const) MULTIPLY16C16(var,const) +#else +#define MULTIPLY(var,const) ((var) * (const)) +#endif + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce an int result. In this module, both inputs and result + * are 16 bits or less, so either int or short multiply will work. + */ + +#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + */ + +GLOBAL(void) +jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[DCTSIZE2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3, */ + /* and also undo the PASS1_BITS scaling. */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * On machines with very fast multiplication, it's possible that the + * test takes more time than it's worth. In that case this section + * may be commented out. + */ + +#ifndef NO_ZERO_ROW_TEST + if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && + wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { + /* AC terms all zero */ + JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) + & RANGE_MASK]; + + outptr[0] = dcval; + outptr[1] = dcval; + outptr[2] = dcval; + outptr[3] = dcval; + outptr[4] = dcval; + outptr[5] = dcval; + outptr[6] = dcval; + outptr[7] = dcval; + + wsptr += DCTSIZE; /* advance pointer to next row */ + continue; + } +#endif + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + /* Add fudge factor here for final descale. */ + z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#ifdef IDCT_SCALING_SUPPORTED + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 7x7 output block. + * + * Optimized algorithm with 12 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/14). + */ + +GLOBAL(void) +jpeg_idct_7x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[7*7]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp13 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp13 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp13 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp0 = z1 + z3; + z2 -= tmp0; + tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */ + tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp13 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + + tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp0 += z2; + tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + wsptr[7*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[7*6] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[7*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[7*5] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[7*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[7*4] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[7*3] = (int) RIGHT_SHIFT(tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 7 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp13 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp13 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp0 = z1 + z3; + z2 -= tmp0; + tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */ + tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp13 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + + tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp0 += z2; + tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 7; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 6x6 output block. + * + * Optimized algorithm with 3 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/12). + */ + +GLOBAL(void) +jpeg_idct_6x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS); + tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) (tmp11 + tmp1); + wsptr[6*4] = (int) (tmp11 - tmp1); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[6*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[4]; + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = tmp0 - tmp10 - tmp10; + tmp10 = (INT32) wsptr[2]; + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 5x5 output block. + * + * Optimized algorithm with 5 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/10). + */ + +GLOBAL(void) +jpeg_idct_5x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[5*5]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp12 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp12 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + wsptr[5*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[5*4] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[5*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[5*3] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[5*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 5 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp12 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp12 <<= CONST_BITS; + tmp0 = (INT32) wsptr[2]; + tmp1 = (INT32) wsptr[4]; + z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 5; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 4x4 output block. + * + * Optimized algorithm with 3 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + +GLOBAL(void) +jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[4*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << PASS1_BITS; + tmp12 = (tmp0 - tmp2) << PASS1_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Final output stage */ + + wsptr[4*0] = (int) (tmp10 + tmp0); + wsptr[4*3] = (int) (tmp10 - tmp0); + wsptr[4*1] = (int) (tmp12 + tmp2); + wsptr[4*2] = (int) (tmp12 - tmp2); + } + + /* Pass 2: process 4 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp2 = (INT32) wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 3x3 output block. + * + * Optimized algorithm with 2 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/6). + */ + +GLOBAL(void) +jpeg_idct_3x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[3*3]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 3 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[2]; + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = (INT32) wsptr[1]; + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 3; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 2x2 output block. + * + * Multiplication-less algorithm. + */ + +GLOBAL(void) +jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + ISLOW_MULT_TYPE * quantptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + SHIFT_TEMPS + + /* Pass 1: process columns from input. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + + /* Column 0 */ + tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]); + /* Add fudge factor here for final descale. */ + tmp4 += ONE << 2; + + tmp0 = tmp4 + tmp5; + tmp2 = tmp4 - tmp5; + + /* Column 1 */ + tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0+1], quantptr[DCTSIZE*0+1]); + tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1+1], quantptr[DCTSIZE*1+1]); + + tmp1 = tmp4 + tmp5; + tmp3 = tmp4 - tmp5; + + /* Pass 2: process 2 rows, store into output array. */ + + /* Row 0 */ + outptr = output_buf[0] + output_col; + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp0 + tmp1, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp0 - tmp1, 3) & RANGE_MASK]; + + /* Row 1 */ + outptr = output_buf[1] + output_col; + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp2 + tmp3, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2 - tmp3, 3) & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 1x1 output block. + * + * We hardly need an inverse DCT routine for this: just take the + * average pixel value, which is one-eighth of the DC coefficient. + */ + +GLOBAL(void) +jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + int dcval; + ISLOW_MULT_TYPE * quantptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + SHIFT_TEMPS + + /* 1x1 is trivial: just take the DC coefficient divided by 8. */ + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + dcval = DEQUANTIZE(coef_block[0], quantptr[0]); + dcval = (int) DESCALE((INT32) dcval, 3); + + output_buf[0][output_col] = range_limit[dcval & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 9x9 output block. + * + * Optimized algorithm with 10 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/18). + */ + +GLOBAL(void) +jpeg_idct_9x9 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*9]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp3 = MULTIPLY(z3, FIX(0.707106781)); /* c6 */ + tmp1 = tmp0 + tmp3; + tmp2 = tmp0 - tmp3 - tmp3; + + tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */ + tmp11 = tmp2 + tmp0; + tmp14 = tmp2 - tmp0 - tmp0; + + tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */ + tmp2 = MULTIPLY(z1, FIX(1.083350441)); /* c4 */ + tmp3 = MULTIPLY(z2, FIX(0.245575608)); /* c8 */ + + tmp10 = tmp1 + tmp0 - tmp3; + tmp12 = tmp1 - tmp0 + tmp2; + tmp13 = tmp1 - tmp2 + tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z2 = MULTIPLY(z2, - FIX(1.224744871)); /* -c3 */ + + tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525)); /* c7 */ + tmp0 = tmp2 + tmp3 - z2; + tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481)); /* c1 */ + tmp2 += z2 - tmp1; + tmp3 += z2 + tmp1; + tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp13 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp13 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 9 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 9; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp3 = MULTIPLY(z3, FIX(0.707106781)); /* c6 */ + tmp1 = tmp0 + tmp3; + tmp2 = tmp0 - tmp3 - tmp3; + + tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */ + tmp11 = tmp2 + tmp0; + tmp14 = tmp2 - tmp0 - tmp0; + + tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */ + tmp2 = MULTIPLY(z1, FIX(1.083350441)); /* c4 */ + tmp3 = MULTIPLY(z2, FIX(0.245575608)); /* c8 */ + + tmp10 = tmp1 + tmp0 - tmp3; + tmp12 = tmp1 - tmp0 + tmp2; + tmp13 = tmp1 - tmp2 + tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + z2 = MULTIPLY(z2, - FIX(1.224744871)); /* -c3 */ + + tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525)); /* c7 */ + tmp0 = tmp2 + tmp3 - z2; + tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481)); /* c1 */ + tmp2 += z2 - tmp1; + tmp3 += z2 + tmp1; + tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 10x10 output block. + * + * Optimized algorithm with 12 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/20). + */ + +GLOBAL(void) +jpeg_idct_10x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4, z5; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*10]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1), /* c0 = (c4-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + z5 = z3 << CONST_BITS; + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z5 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = (z1 - tmp13 - z3) << PASS1_BITS; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) (tmp22 + tmp12); + wsptr[8*7] = (int) (tmp22 - tmp12); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 10 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 10; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = z3 - ((z1 - z2) << 1); /* c0 = (c4-c8)*2 */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[7]; + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z3 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = ((z1 - tmp13) << CONST_BITS) - z3; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 11x11 output block. + * + * Optimized algorithm with 24 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/22). + */ + +GLOBAL(void) +jpeg_idct_11x11 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*11]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp10 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp10 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132)); /* c2+c4 */ + tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045)); /* c2-c6 */ + z4 = z1 + z3; + tmp24 = MULTIPLY(z4, - FIX(1.155664402)); /* -(c2-c10) */ + z4 -= z2; + tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976)); /* c2 */ + tmp21 = tmp20 + tmp23 + tmp25 - + MULTIPLY(z2, FIX(1.821790775)); /* c2+c4+c10-c6 */ + tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */ + tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */ + tmp24 += tmp25; + tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120)); /* c8+c10 */ + tmp24 += MULTIPLY(z2, FIX(1.944413522)) - /* c2+c8 */ + MULTIPLY(z1, FIX(1.390975730)); /* c4+c10 */ + tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z2; + tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.887983902)); /* c3-c9 */ + tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295)); /* c5-c9 */ + tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(0.923107866)); /* c7+c5+c3-c1-2*c9 */ + z1 = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */ + tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588)); /* c1+c7+3*c9-c3 */ + tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623)); /* c3+c5-c7-c9 */ + z1 = MULTIPLY(z2 + z4, - FIX(1.798248910)); /* -(c1+c9) */ + tmp11 += z1; + tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632)); /* c1+c5+c9-c7 */ + tmp14 += MULTIPLY(z2, - FIX(1.467221301)) + /* -(c5+c9) */ + MULTIPLY(z3, FIX(1.001388905)) - /* c1-c9 */ + MULTIPLY(z4, FIX(1.684843907)); /* c3+c9 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 11 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 11; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp10 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp10 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132)); /* c2+c4 */ + tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045)); /* c2-c6 */ + z4 = z1 + z3; + tmp24 = MULTIPLY(z4, - FIX(1.155664402)); /* -(c2-c10) */ + z4 -= z2; + tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976)); /* c2 */ + tmp21 = tmp20 + tmp23 + tmp25 - + MULTIPLY(z2, FIX(1.821790775)); /* c2+c4+c10-c6 */ + tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */ + tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */ + tmp24 += tmp25; + tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120)); /* c8+c10 */ + tmp24 += MULTIPLY(z2, FIX(1.944413522)) - /* c2+c8 */ + MULTIPLY(z1, FIX(1.390975730)); /* c4+c10 */ + tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z2; + tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.887983902)); /* c3-c9 */ + tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295)); /* c5-c9 */ + tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(0.923107866)); /* c7+c5+c3-c1-2*c9 */ + z1 = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */ + tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588)); /* c1+c7+3*c9-c3 */ + tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623)); /* c3+c5-c7-c9 */ + z1 = MULTIPLY(z2 + z4, - FIX(1.798248910)); /* -(c1+c9) */ + tmp11 += z1; + tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632)); /* c1+c5+c9-c7 */ + tmp14 += MULTIPLY(z2, - FIX(1.467221301)) + /* -(c5+c9) */ + MULTIPLY(z3, FIX(1.001388905)) - /* c1-c9 */ + MULTIPLY(z4, FIX(1.684843907)); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 12x12 output block. + * + * Optimized algorithm with 15 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/24). + */ + +GLOBAL(void) +jpeg_idct_12x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*12]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 12 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 12; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 <<= CONST_BITS; + + z4 = (INT32) wsptr[4]; + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = (INT32) wsptr[2]; + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = (INT32) wsptr[6]; + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 13x13 output block. + * + * Optimized algorithm with 29 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/26). + */ + +GLOBAL(void) +jpeg_idct_13x13 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*13]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + tmp12 = MULTIPLY(tmp10, FIX(1.155388986)); /* (c4+c6)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1; /* (c4-c6)/2 */ + + tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13; /* c2 */ + tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13; /* c10 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.316450131)); /* (c8-c12)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1; /* (c8+c12)/2 */ + + tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13; /* c6 */ + tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.435816023)); /* (c2-c10)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1; /* (c2+c10)/2 */ + + tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */ + tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */ + + tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1; /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651)); /* c3 */ + tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945)); /* c5 */ + tmp15 = z1 + z4; + tmp13 = MULTIPLY(tmp15, FIX(0.937797057)); /* c7 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(2.020082300)); /* c7+c5+c3-c1 */ + tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458)); /* -c11 */ + tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */ + tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */ + tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945)); /* -c5 */ + tmp11 += tmp14; + tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */ + tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813)); /* -c9 */ + tmp12 += tmp14; + tmp13 += tmp14; + tmp15 = MULTIPLY(tmp15, FIX(0.338443458)); /* c11 */ + tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */ + MULTIPLY(z2, FIX(0.466105296)); /* c1-c7 */ + z1 = MULTIPLY(z3 - z2, FIX(0.937797057)); /* c7 */ + tmp14 += z1; + tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) - /* c3-c7 */ + MULTIPLY(z4, FIX(1.742345811)); /* c1+c11 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 13 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 13; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z1 <<= CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[4]; + z4 = (INT32) wsptr[6]; + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + tmp12 = MULTIPLY(tmp10, FIX(1.155388986)); /* (c4+c6)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1; /* (c4-c6)/2 */ + + tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13; /* c2 */ + tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13; /* c10 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.316450131)); /* (c8-c12)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1; /* (c8+c12)/2 */ + + tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13; /* c6 */ + tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.435816023)); /* (c2-c10)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1; /* (c2+c10)/2 */ + + tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */ + tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */ + + tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1; /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651)); /* c3 */ + tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945)); /* c5 */ + tmp15 = z1 + z4; + tmp13 = MULTIPLY(tmp15, FIX(0.937797057)); /* c7 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(2.020082300)); /* c7+c5+c3-c1 */ + tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458)); /* -c11 */ + tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */ + tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */ + tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945)); /* -c5 */ + tmp11 += tmp14; + tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */ + tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813)); /* -c9 */ + tmp12 += tmp14; + tmp13 += tmp14; + tmp15 = MULTIPLY(tmp15, FIX(0.338443458)); /* c11 */ + tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */ + MULTIPLY(z2, FIX(0.466105296)); /* c1-c7 */ + z1 = MULTIPLY(z3 - z2, FIX(0.937797057)); /* c7 */ + tmp14 += z1; + tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) - /* c3-c7 */ + MULTIPLY(z4, FIX(1.742345811)); /* c1+c11 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 14x14 output block. + * + * Optimized algorithm with 20 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/28). + */ + +GLOBAL(void) +jpeg_idct_14x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*14]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp13 = z4 << CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13; /* c11 */ + tmp16 += tmp15; + z1 += z4; + z4 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */ + tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + z4 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = (z1 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) (tmp23 + tmp13); + wsptr[8*10] = (int) (tmp23 - tmp13); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 14 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 14; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z1 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = z1 - ((z2 + z3 - z4) << 1); /* c0 = (c4+c12-c8)*2 */ + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + z4 <<= CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4; /* c11 */ + tmp16 += tmp15; + tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4; /* -c13 */ + tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = ((z1 - z3) << CONST_BITS) + z4; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 15x15 output block. + * + * Optimized algorithm with 22 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/30). + */ + +GLOBAL(void) +jpeg_idct_15x15 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*15]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */ + tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */ + + tmp12 = z1 - tmp10; + tmp13 = z1 + tmp11; + z1 -= (tmp11 - tmp10) << 1; /* c0 = (c6-c12)*2 */ + + z4 = z2 - z3; + z3 += z2; + tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */ + z2 = MULTIPLY(z2, FIX(1.439773946)); /* c4+c14 */ + + tmp20 = tmp13 + tmp10 + tmp11; + tmp23 = tmp12 - tmp10 + tmp11 + z2; + + tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */ + + tmp25 = tmp13 - tmp10 - tmp11; + tmp26 = tmp12 + tmp10 - tmp11 - z2; + + tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */ + + tmp21 = tmp12 + tmp10 + tmp11; + tmp24 = tmp13 - tmp10 + tmp11; + tmp11 += tmp11; + tmp22 = z1 + tmp11; /* c10 = c6-c12 */ + tmp27 = z1 - tmp11 - tmp11; /* c0 = (c6-c12)*2 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z4 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z3 = MULTIPLY(z4, FIX(1.224744871)); /* c5 */ + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp13 = z2 - z4; + tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876)); /* c9 */ + tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148)); /* c3-c9 */ + tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899)); /* c3+c9 */ + + tmp13 = MULTIPLY(z2, - FIX(0.831253876)); /* -c9 */ + tmp15 = MULTIPLY(z2, - FIX(1.344997024)); /* -c3 */ + z2 = z1 - z4; + tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353)); /* c1 */ + + tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */ + tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */ + tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3; /* c5 */ + z2 = MULTIPLY(z1 + z4, FIX(0.575212477)); /* c11 */ + tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3; /* c7-c11 */ + tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3; /* c11+c13 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 15 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 15; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z1 <<= CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[4]; + z4 = (INT32) wsptr[6]; + + tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */ + tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */ + + tmp12 = z1 - tmp10; + tmp13 = z1 + tmp11; + z1 -= (tmp11 - tmp10) << 1; /* c0 = (c6-c12)*2 */ + + z4 = z2 - z3; + z3 += z2; + tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */ + z2 = MULTIPLY(z2, FIX(1.439773946)); /* c4+c14 */ + + tmp20 = tmp13 + tmp10 + tmp11; + tmp23 = tmp12 - tmp10 + tmp11 + z2; + + tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */ + + tmp25 = tmp13 - tmp10 - tmp11; + tmp26 = tmp12 + tmp10 - tmp11 - z2; + + tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */ + + tmp21 = tmp12 + tmp10 + tmp11; + tmp24 = tmp13 - tmp10 + tmp11; + tmp11 += tmp11; + tmp22 = z1 + tmp11; /* c10 = c6-c12 */ + tmp27 = z1 - tmp11 - tmp11; /* c0 = (c6-c12)*2 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z4 = (INT32) wsptr[5]; + z3 = MULTIPLY(z4, FIX(1.224744871)); /* c5 */ + z4 = (INT32) wsptr[7]; + + tmp13 = z2 - z4; + tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876)); /* c9 */ + tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148)); /* c3-c9 */ + tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899)); /* c3+c9 */ + + tmp13 = MULTIPLY(z2, - FIX(0.831253876)); /* -c9 */ + tmp15 = MULTIPLY(z2, - FIX(1.344997024)); /* -c3 */ + z2 = z1 - z4; + tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353)); /* c1 */ + + tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */ + tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */ + tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3; /* c5 */ + z2 = MULTIPLY(z1 + z4, FIX(0.575212477)); /* c11 */ + tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3; /* c7-c11 */ + tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3; /* c11+c13 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 16x16 output block. + * + * Optimized algorithm with 28 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/32). + */ + +GLOBAL(void) +jpeg_idct_16x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*16]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += 1 << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 16 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 16; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[4]; + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 16x8 output block. + * + * 8-point IDCT in pass 1 (columns), 16-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_16x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*8]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process 8 rows from work array, store into output array. + * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[4]; + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 14x7 output block. + * + * 7-point IDCT in pass 1 (columns), 14-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_14x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*7]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp23 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp23 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp23 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp10 = z1 + z3; + z2 -= tmp10; + tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */ + tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp23 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + + tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp10 = tmp11 - tmp12; + tmp11 += tmp12; + tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp11 += tmp12; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp10 += z2; + tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 7 rows from work array, store into output array. + * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28). + */ + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z1 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = z1 - ((z2 + z3 - z4) << 1); /* c0 = (c4+c12-c8)*2 */ + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + z4 <<= CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4; /* c11 */ + tmp16 += tmp15; + tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4; /* -c13 */ + tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = ((z1 - z3) << CONST_BITS) + z4; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 12x6 output block. + * + * 6-point IDCT in pass 1 (columns), 12-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_12x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp10 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp10 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp12 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp20 = MULTIPLY(tmp12, FIX(0.707106781)); /* c4 */ + tmp11 = tmp10 + tmp20; + tmp21 = RIGHT_SHIFT(tmp10 - tmp20 - tmp20, CONST_BITS-PASS1_BITS); + tmp20 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp10 = MULTIPLY(tmp20, FIX(1.224744871)); /* c2 */ + tmp20 = tmp11 + tmp10; + tmp22 = tmp11 - tmp10; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp10 = tmp11 + ((z1 + z2) << CONST_BITS); + tmp12 = tmp11 + ((z3 - z2) << CONST_BITS); + tmp11 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) (tmp21 + tmp11); + wsptr[8*4] = (int) (tmp21 - tmp11); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. + * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24). + */ + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 <<= CONST_BITS; + + z4 = (INT32) wsptr[4]; + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = (INT32) wsptr[2]; + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = (INT32) wsptr[6]; + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 10x5 output block. + * + * 5-point IDCT in pass 1 (columns), 10-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_10x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*5]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp12 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp12 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp13 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp14 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp10 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp11 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 5 rows from work array, store into output array. + * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20). + */ + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = z3 - ((z1 - z2) << 1); /* c0 = (c4-c8)*2 */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[7]; + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z3 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = ((z1 - tmp13) << CONST_BITS) - z3; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 8x4 output block. + * + * 4-point IDCT in pass 1 (columns), 8-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_8x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 4-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << PASS1_BITS; + tmp12 = (tmp0 - tmp2) << PASS1_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Final output stage */ + + wsptr[8*0] = (int) (tmp10 + tmp0); + wsptr[8*3] = (int) (tmp10 - tmp0); + wsptr[8*1] = (int) (tmp12 + tmp2); + wsptr[8*2] = (int) (tmp12 - tmp2); + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3, */ + /* and also undo the PASS1_BITS scaling. */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + /* Add fudge factor here for final descale. */ + z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 6x3 output block. + * + * 3-point IDCT in pass 1 (columns), 6-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_6x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*3]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 3 rows from work array, store into output array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[4]; + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = tmp0 - tmp10 - tmp10; + tmp10 = (INT32) wsptr[2]; + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 4x2 output block. + * + * 2-point IDCT in pass 1 (columns), 4-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_4x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + INT32 * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + INT32 workspace[4*2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + /* Odd part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + /* Final output stage */ + + wsptr[4*0] = tmp10 + tmp0; + wsptr[4*1] = tmp10 - tmp0; + } + + /* Pass 2: process 2 rows from work array, store into output array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + wsptr = workspace; + for (ctr = 0; ctr < 2; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = wsptr[0] + (ONE << 2); + tmp2 = wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = wsptr[1]; + z3 = wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 2x1 output block. + * + * 1-point IDCT in pass 1 (columns), 2-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_2x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp10; + ISLOW_MULT_TYPE * quantptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + SHIFT_TEMPS + + /* Pass 1: empty. */ + + /* Pass 2: process 1 row from input, store into output array. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + outptr = output_buf[0] + output_col; + + /* Even part */ + + tmp10 = DEQUANTIZE(coef_block[0], quantptr[0]); + /* Add fudge factor here for final descale. */ + tmp10 += ONE << 2; + + /* Odd part */ + + tmp0 = DEQUANTIZE(coef_block[1], quantptr[1]); + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, 3) & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 8x16 output block. + * + * 16-point IDCT in pass 1 (columns), 8-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_8x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*16]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3, */ + /* and also undo the PASS1_BITS scaling. */ + + wsptr = workspace; + for (ctr = 0; ctr < 16; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + /* Add fudge factor here for final descale. */ + z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 7x14 output block. + * + * 14-point IDCT in pass 1 (columns), 7-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_7x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[7*14]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp13 = z4 << CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13; /* c11 */ + tmp16 += tmp15; + z1 += z4; + z4 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */ + tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + z4 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = (z1 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[7*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[7*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[7*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[7*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[7*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[7*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[7*3] = (int) (tmp23 + tmp13); + wsptr[7*10] = (int) (tmp23 - tmp13); + wsptr[7*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[7*9] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[7*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[7*8] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[7*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[7*7] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 14 rows from work array, store into output array. + * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14). + */ + wsptr = workspace; + for (ctr = 0; ctr < 14; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp23 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp23 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp10 = z1 + z3; + z2 -= tmp10; + tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */ + tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp23 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + + tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp10 = tmp11 - tmp12; + tmp11 += tmp12; + tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp11 += tmp12; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp10 += z2; + tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 7; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 6x12 output block. + * + * 12-point IDCT in pass 1 (columns), 6-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_6x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*12]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[6*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[6*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[6*9] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[6*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[6*8] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[6*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[6*7] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[6*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[6*6] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 12 rows from work array, store into output array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + wsptr = workspace; + for (ctr = 0; ctr < 12; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp10 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp10 <<= CONST_BITS; + tmp12 = (INT32) wsptr[4]; + tmp20 = MULTIPLY(tmp12, FIX(0.707106781)); /* c4 */ + tmp11 = tmp10 + tmp20; + tmp21 = tmp10 - tmp20 - tmp20; + tmp20 = (INT32) wsptr[2]; + tmp10 = MULTIPLY(tmp20, FIX(1.224744871)); /* c2 */ + tmp20 = tmp11 + tmp10; + tmp22 = tmp11 - tmp10; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp10 = tmp11 + ((z1 + z2) << CONST_BITS); + tmp12 = tmp11 + ((z3 - z2) << CONST_BITS); + tmp11 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 5x10 output block. + * + * 10-point IDCT in pass 1 (columns), 5-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_5x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4, z5; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[5*10]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1), /* c0 = (c4-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + z5 = z3 << CONST_BITS; + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z5 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = (z1 - tmp13 - z3) << PASS1_BITS; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + wsptr[5*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[5*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[5*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[5*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[5*2] = (int) (tmp22 + tmp12); + wsptr[5*7] = (int) (tmp22 - tmp12); + wsptr[5*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[5*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[5*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[5*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 10 rows from work array, store into output array. + * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10). + */ + wsptr = workspace; + for (ctr = 0; ctr < 10; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp12 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp12 <<= CONST_BITS; + tmp13 = (INT32) wsptr[2]; + tmp14 = (INT32) wsptr[4]; + z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 5; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 4x8 output block. + * + * 8-point IDCT in pass 1 (columns), 4-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_4x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[4*8]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 4; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[4*0] = dcval; + wsptr[4*1] = dcval; + wsptr[4*2] = dcval; + wsptr[4*3] = dcval; + wsptr[4*4] = dcval; + wsptr[4*5] = dcval; + wsptr[4*6] = dcval; + wsptr[4*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[4*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[4*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[4*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[4*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[4*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[4*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[4*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[4*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process 8 rows from work array, store into output array. + * 4-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp2 = (INT32) wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 3x6 output block. + * + * 6-point IDCT in pass 1 (columns), 3-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_3x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[3*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS); + tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*1] = (int) (tmp11 + tmp1); + wsptr[3*4] = (int) (tmp11 - tmp1); + wsptr[3*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[3*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. + * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6). + */ + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[2]; + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = (INT32) wsptr[1]; + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 3; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 2x4 output block. + * + * 4-point IDCT in pass 1 (columns), 2-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_2x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + INT32 * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + INT32 workspace[2*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 2; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + wsptr[2*0] = tmp10 + tmp0; + wsptr[2*3] = tmp10 - tmp0; + wsptr[2*1] = tmp12 + tmp2; + wsptr[2*2] = tmp12 - tmp2; + } + + /* Pass 2: process 4 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp10 = wsptr[0] + (ONE << (CONST_BITS+2)); + + /* Odd part */ + + tmp0 = wsptr[1]; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS+3) + & RANGE_MASK]; + + wsptr += 2; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 1x2 output block. + * + * 2-point IDCT in pass 1 (columns), 1-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_1x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp10; + ISLOW_MULT_TYPE * quantptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + SHIFT_TEMPS + + /* Process 1 column from input, store into output array. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + + /* Even part */ + + tmp10 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]); + /* Add fudge factor here for final descale. */ + tmp10 += ONE << 2; + + /* Odd part */ + + tmp0 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]); + + /* Final output stage */ + + output_buf[0][output_col] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, 3) + & RANGE_MASK]; + output_buf[1][output_col] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, 3) + & RANGE_MASK]; +} + +#endif /* IDCT_SCALING_SUPPORTED */ +#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/jinclude.h b/src/SDL2/external/jpeg-9/jinclude.h new file mode 100644 index 000000000..0a4f15146 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jinclude.h @@ -0,0 +1,91 @@ +/* + * jinclude.h + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file exists to provide a single place to fix any problems with + * including the wrong system include files. (Common problems are taken + * care of by the standard jconfig symbols, but on really weird systems + * you may have to edit this file.) + * + * NOTE: this file is NOT intended to be included by applications using the + * JPEG library. Most applications need only include jpeglib.h. + */ + + +/* Include auto-config file to find out which system include files we need. */ + +#include "jconfig.h" /* auto configuration options */ +#define JCONFIG_INCLUDED /* so that jpeglib.h doesn't do it again */ + +/* + * We need the NULL macro and size_t typedef. + * On an ANSI-conforming system it is sufficient to include . + * Otherwise, we get them from or ; we may have to + * pull in as well. + * Note that the core JPEG library does not require ; + * only the default error handler and data source/destination modules do. + * But we must pull it in because of the references to FILE in jpeglib.h. + * You can remove those references if you want to compile without . + */ + +#ifdef HAVE_STDDEF_H +#include +#endif + +#ifdef HAVE_STDLIB_H +#include +#endif + +#ifdef NEED_SYS_TYPES_H +#include +#endif + +#include + +/* + * We need memory copying and zeroing functions, plus strncpy(). + * ANSI and System V implementations declare these in . + * BSD doesn't have the mem() functions, but it does have bcopy()/bzero(). + * Some systems may declare memset and memcpy in . + * + * NOTE: we assume the size parameters to these functions are of type size_t. + * Change the casts in these macros if not! + */ + +#ifdef NEED_BSD_STRINGS + +#include +#define MEMZERO(target,size) bzero((void *)(target), (size_t)(size)) +#define MEMCOPY(dest,src,size) bcopy((const void *)(src), (void *)(dest), (size_t)(size)) + +#else /* not BSD, assume ANSI/SysV string lib */ + +#include +#define MEMZERO(target,size) memset((void *)(target), 0, (size_t)(size)) +#define MEMCOPY(dest,src,size) memcpy((void *)(dest), (const void *)(src), (size_t)(size)) + +#endif + +/* + * In ANSI C, and indeed any rational implementation, size_t is also the + * type returned by sizeof(). However, it seems there are some irrational + * implementations out there, in which sizeof() returns an int even though + * size_t is defined as long or unsigned long. To ensure consistent results + * we always use this SIZEOF() macro in place of using sizeof() directly. + */ + +#define SIZEOF(object) ((size_t) sizeof(object)) + +/* + * The modules that use fread() and fwrite() always invoke them through + * these macros. On some systems you may need to twiddle the argument casts. + * CAUTION: argument order is different from underlying functions! + */ + +#define JFREAD(file,buf,sizeofbuf) \ + ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) +#define JFWRITE(file,buf,sizeofbuf) \ + ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) diff --git a/src/SDL2/external/jpeg-9/jmem-android.c b/src/SDL2/external/jpeg-9/jmem-android.c new file mode 100644 index 000000000..5da4d0a6d --- /dev/null +++ b/src/SDL2/external/jpeg-9/jmem-android.c @@ -0,0 +1,186 @@ +/* + * Copyright (C) 2007-2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + +#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ +#define SEEK_SET 0 /* if not, assume 0 is correct */ +#endif + + +/* + * Memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * It's impossible to do this in a portable way; our current solution is + * to make the user tell us (with a default value set at compile time). + * If you can actually get the available space, it's a good idea to subtract + * a slop factor of 5% or so. + */ + +#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ +#define DEFAULT_MAX_MEM 10000000L /* default: ten megabyte */ +#endif + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return cinfo->mem->max_memory_to_use - already_allocated; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + + +METHODDEF(void) +read_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFREAD(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFWRITE(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_backing_store (j_common_ptr cinfo, backing_store_ptr info) +{ + fclose(info->temp_file); + /* Since this implementation uses tmpfile() to create the file, + * no explicit file deletion is needed. + */ +} + +static FILE* getTempFileFromPath(const char * path) { + FILE * fd = fopen(path, "w+"); + unlink(path); + return fd; +} + +static FILE* getTempFile() { + char path[1024]; + snprintf(path, 1023, "/sdcard/.%d.tmp", getpid()); + FILE * fd = getTempFileFromPath(path); + if (fd == NULL) { + // anywhere else we can create a temp file? + // snprintf(path, 1023, "/data/data/.%d.tmp", getpid()); + // fd = getTempFileFromPath(path); + } + return fd; +} + +/* + * Initial opening of a backing-store object. + * + * This version uses tmpfile(), which constructs a suitable file name + * behind the scenes. We don't have to use info->temp_name[] at all; + * indeed, we can't even find out the actual name of the temp file. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + if ((info->temp_file = getTempFile()) == NULL) + ERREXITS(cinfo, JERR_TFILE_CREATE, ""); + info->read_backing_store = read_backing_store; + info->write_backing_store = write_backing_store; + info->close_backing_store = close_backing_store; +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/src/SDL2/external/jpeg-9/jmemansi.c b/src/SDL2/external/jpeg-9/jmemansi.c new file mode 100644 index 000000000..2d93e4962 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jmemansi.c @@ -0,0 +1,167 @@ +/* + * jmemansi.c + * + * Copyright (C) 1992-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides a simple generic implementation of the system- + * dependent portion of the JPEG memory manager. This implementation + * assumes that you have the ANSI-standard library routine tmpfile(). + * Also, the problem of determining the amount of memory available + * is shoved onto the user. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + +#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ +#define SEEK_SET 0 /* if not, assume 0 is correct */ +#endif + + +/* + * Memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * It's impossible to do this in a portable way; our current solution is + * to make the user tell us (with a default value set at compile time). + * If you can actually get the available space, it's a good idea to subtract + * a slop factor of 5% or so. + */ + +#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ +#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ +#endif + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return cinfo->mem->max_memory_to_use - already_allocated; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + + +METHODDEF(void) +read_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFREAD(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFWRITE(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_backing_store (j_common_ptr cinfo, backing_store_ptr info) +{ + fclose(info->temp_file); + /* Since this implementation uses tmpfile() to create the file, + * no explicit file deletion is needed. + */ +} + + +/* + * Initial opening of a backing-store object. + * + * This version uses tmpfile(), which constructs a suitable file name + * behind the scenes. We don't have to use info->temp_name[] at all; + * indeed, we can't even find out the actual name of the temp file. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + if ((info->temp_file = tmpfile()) == NULL) + ERREXITS(cinfo, JERR_TFILE_CREATE, ""); + info->read_backing_store = read_backing_store; + info->write_backing_store = write_backing_store; + info->close_backing_store = close_backing_store; +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/src/SDL2/external/jpeg-9/jmemdos.c b/src/SDL2/external/jpeg-9/jmemdos.c new file mode 100644 index 000000000..60b45c693 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jmemdos.c @@ -0,0 +1,638 @@ +/* + * jmemdos.c + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides an MS-DOS-compatible implementation of the system- + * dependent portion of the JPEG memory manager. Temporary data can be + * stored in extended or expanded memory as well as in regular DOS files. + * + * If you use this file, you must be sure that NEED_FAR_POINTERS is defined + * if you compile in a small-data memory model; it should NOT be defined if + * you use a large-data memory model. This file is not recommended if you + * are using a flat-memory-space 386 environment such as DJGCC or Watcom C. + * Also, this code will NOT work if struct fields are aligned on greater than + * 2-byte boundaries. + * + * Based on code contributed by Ge' Weijers. + */ + +/* + * If you have both extended and expanded memory, you may want to change the + * order in which they are tried in jopen_backing_store. On a 286 machine + * expanded memory is usually faster, since extended memory access involves + * an expensive protected-mode-and-back switch. On 386 and better, extended + * memory is usually faster. As distributed, the code tries extended memory + * first (what? not everyone has a 386? :-). + * + * You can disable use of extended/expanded memory entirely by altering these + * definitions or overriding them from the Makefile (eg, -DEMS_SUPPORTED=0). + */ + +#ifndef XMS_SUPPORTED +#define XMS_SUPPORTED 1 +#endif +#ifndef EMS_SUPPORTED +#define EMS_SUPPORTED 1 +#endif + + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare these */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +extern char * getenv JPP((const char * name)); +#endif + +#ifdef NEED_FAR_POINTERS + +#ifdef __TURBOC__ +/* These definitions work for Borland C (Turbo C) */ +#include /* need farmalloc(), farfree() */ +#define far_malloc(x) farmalloc(x) +#define far_free(x) farfree(x) +#else +/* These definitions work for Microsoft C and compatible compilers */ +#include /* need _fmalloc(), _ffree() */ +#define far_malloc(x) _fmalloc(x) +#define far_free(x) _ffree(x) +#endif + +#else /* not NEED_FAR_POINTERS */ + +#define far_malloc(x) malloc(x) +#define far_free(x) free(x) + +#endif /* NEED_FAR_POINTERS */ + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#else +#define READ_BINARY "rb" +#endif + +#ifndef USE_MSDOS_MEMMGR /* make sure user got configuration right */ + You forgot to define USE_MSDOS_MEMMGR in jconfig.h. /* deliberate syntax error */ +#endif + +#if MAX_ALLOC_CHUNK >= 65535L /* make sure jconfig.h got this right */ + MAX_ALLOC_CHUNK should be less than 64K. /* deliberate syntax error */ +#endif + + +/* + * Declarations for assembly-language support routines (see jmemdosa.asm). + * + * The functions are declared "far" as are all their pointer arguments; + * this ensures the assembly source code will work regardless of the + * compiler memory model. We assume "short" is 16 bits, "long" is 32. + */ + +typedef void far * XMSDRIVER; /* actually a pointer to code */ +typedef struct { /* registers for calling XMS driver */ + unsigned short ax, dx, bx; + void far * ds_si; + } XMScontext; +typedef struct { /* registers for calling EMS driver */ + unsigned short ax, dx, bx; + void far * ds_si; + } EMScontext; + +extern short far jdos_open JPP((short far * handle, char far * filename)); +extern short far jdos_close JPP((short handle)); +extern short far jdos_seek JPP((short handle, long offset)); +extern short far jdos_read JPP((short handle, void far * buffer, + unsigned short count)); +extern short far jdos_write JPP((short handle, void far * buffer, + unsigned short count)); +extern void far jxms_getdriver JPP((XMSDRIVER far *)); +extern void far jxms_calldriver JPP((XMSDRIVER, XMScontext far *)); +extern short far jems_available JPP((void)); +extern void far jems_calldriver JPP((EMScontext far *)); + + +/* + * Selection of a file name for a temporary file. + * This is highly system-dependent, and you may want to customize it. + */ + +static int next_file_num; /* to distinguish among several temp files */ + +LOCAL(void) +select_file_name (char * fname) +{ + const char * env; + char * ptr; + FILE * tfile; + + /* Keep generating file names till we find one that's not in use */ + for (;;) { + /* Get temp directory name from environment TMP or TEMP variable; + * if none, use "." + */ + if ((env = (const char *) getenv("TMP")) == NULL) + if ((env = (const char *) getenv("TEMP")) == NULL) + env = "."; + if (*env == '\0') /* null string means "." */ + env = "."; + ptr = fname; /* copy name to fname */ + while (*env != '\0') + *ptr++ = *env++; + if (ptr[-1] != '\\' && ptr[-1] != '/') + *ptr++ = '\\'; /* append backslash if not in env variable */ + /* Append a suitable file name */ + next_file_num++; /* advance counter */ + sprintf(ptr, "JPG%03d.TMP", next_file_num); + /* Probe to see if file name is already in use */ + if ((tfile = fopen(fname, READ_BINARY)) == NULL) + break; + fclose(tfile); /* oops, it's there; close tfile & try again */ + } +} + + +/* + * Near-memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are allocated in far memory, if possible + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) far_malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + far_free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * It's impossible to do this in a portable way; our current solution is + * to make the user tell us (with a default value set at compile time). + * If you can actually get the available space, it's a good idea to subtract + * a slop factor of 5% or so. + */ + +#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ +#define DEFAULT_MAX_MEM 300000L /* for total usage about 450K */ +#endif + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return cinfo->mem->max_memory_to_use - already_allocated; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + +/* + * For MS-DOS we support three types of backing storage: + * 1. Conventional DOS files. We access these by direct DOS calls rather + * than via the stdio package. This provides a bit better performance, + * but the real reason is that the buffers to be read or written are FAR. + * The stdio library for small-data memory models can't cope with that. + * 2. Extended memory, accessed per the XMS V2.0 specification. + * 3. Expanded memory, accessed per the LIM/EMS 4.0 specification. + * You'll need copies of those specs to make sense of the related code. + * The specs are available by Internet FTP from the SIMTEL archives + * (oak.oakland.edu and its various mirror sites). See files + * pub/msdos/microsoft/xms20.arc and pub/msdos/info/limems41.zip. + */ + + +/* + * Access methods for a DOS file. + */ + + +METHODDEF(void) +read_file_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (jdos_seek(info->handle.file_handle, file_offset)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ + if (byte_count > 65535L) /* safety check */ + ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); + if (jdos_read(info->handle.file_handle, buffer_address, + (unsigned short) byte_count)) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_file_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (jdos_seek(info->handle.file_handle, file_offset)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ + if (byte_count > 65535L) /* safety check */ + ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); + if (jdos_write(info->handle.file_handle, buffer_address, + (unsigned short) byte_count)) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_file_store (j_common_ptr cinfo, backing_store_ptr info) +{ + jdos_close(info->handle.file_handle); /* close the file */ + remove(info->temp_name); /* delete the file */ +/* If your system doesn't have remove(), try unlink() instead. + * remove() is the ANSI-standard name for this function, but + * unlink() was more common in pre-ANSI systems. + */ + TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); +} + + +LOCAL(boolean) +open_file_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + short handle; + + select_file_name(info->temp_name); + if (jdos_open((short far *) & handle, (char far *) info->temp_name)) { + /* might as well exit since jpeg_open_backing_store will fail anyway */ + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + return FALSE; + } + info->handle.file_handle = handle; + info->read_backing_store = read_file_store; + info->write_backing_store = write_file_store; + info->close_backing_store = close_file_store; + TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); + return TRUE; /* succeeded */ +} + + +/* + * Access methods for extended memory. + */ + +#if XMS_SUPPORTED + +static XMSDRIVER xms_driver; /* saved address of XMS driver */ + +typedef union { /* either long offset or real-mode pointer */ + long offset; + void far * ptr; + } XMSPTR; + +typedef struct { /* XMS move specification structure */ + long length; + XMSH src_handle; + XMSPTR src; + XMSH dst_handle; + XMSPTR dst; + } XMSspec; + +#define ODD(X) (((X) & 1L) != 0) + + +METHODDEF(void) +read_xms_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + XMScontext ctx; + XMSspec spec; + char endbuffer[2]; + + /* The XMS driver can't cope with an odd length, so handle the last byte + * specially if byte_count is odd. We don't expect this to be common. + */ + + spec.length = byte_count & (~ 1L); + spec.src_handle = info->handle.xms_handle; + spec.src.offset = file_offset; + spec.dst_handle = 0; + spec.dst.ptr = buffer_address; + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x0b00; /* EMB move */ + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax != 1) + ERREXIT(cinfo, JERR_XMS_READ); + + if (ODD(byte_count)) { + read_xms_store(cinfo, info, (void FAR *) endbuffer, + file_offset + byte_count - 1L, 2L); + ((char FAR *) buffer_address)[byte_count - 1L] = endbuffer[0]; + } +} + + +METHODDEF(void) +write_xms_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + XMScontext ctx; + XMSspec spec; + char endbuffer[2]; + + /* The XMS driver can't cope with an odd length, so handle the last byte + * specially if byte_count is odd. We don't expect this to be common. + */ + + spec.length = byte_count & (~ 1L); + spec.src_handle = 0; + spec.src.ptr = buffer_address; + spec.dst_handle = info->handle.xms_handle; + spec.dst.offset = file_offset; + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x0b00; /* EMB move */ + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax != 1) + ERREXIT(cinfo, JERR_XMS_WRITE); + + if (ODD(byte_count)) { + read_xms_store(cinfo, info, (void FAR *) endbuffer, + file_offset + byte_count - 1L, 2L); + endbuffer[0] = ((char FAR *) buffer_address)[byte_count - 1L]; + write_xms_store(cinfo, info, (void FAR *) endbuffer, + file_offset + byte_count - 1L, 2L); + } +} + + +METHODDEF(void) +close_xms_store (j_common_ptr cinfo, backing_store_ptr info) +{ + XMScontext ctx; + + ctx.dx = info->handle.xms_handle; + ctx.ax = 0x0a00; + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + TRACEMS1(cinfo, 1, JTRC_XMS_CLOSE, info->handle.xms_handle); + /* we ignore any error return from the driver */ +} + + +LOCAL(boolean) +open_xms_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + XMScontext ctx; + + /* Get address of XMS driver */ + jxms_getdriver((XMSDRIVER far *) & xms_driver); + if (xms_driver == NULL) + return FALSE; /* no driver to be had */ + + /* Get version number, must be >= 2.00 */ + ctx.ax = 0x0000; + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax < (unsigned short) 0x0200) + return FALSE; + + /* Try to get space (expressed in kilobytes) */ + ctx.dx = (unsigned short) ((total_bytes_needed + 1023L) >> 10); + ctx.ax = 0x0900; + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax != 1) + return FALSE; + + /* Succeeded, save the handle and away we go */ + info->handle.xms_handle = ctx.dx; + info->read_backing_store = read_xms_store; + info->write_backing_store = write_xms_store; + info->close_backing_store = close_xms_store; + TRACEMS1(cinfo, 1, JTRC_XMS_OPEN, ctx.dx); + return TRUE; /* succeeded */ +} + +#endif /* XMS_SUPPORTED */ + + +/* + * Access methods for expanded memory. + */ + +#if EMS_SUPPORTED + +/* The EMS move specification structure requires word and long fields aligned + * at odd byte boundaries. Some compilers will align struct fields at even + * byte boundaries. While it's usually possible to force byte alignment, + * that causes an overall performance penalty and may pose problems in merging + * JPEG into a larger application. Instead we accept some rather dirty code + * here. Note this code would fail if the hardware did not allow odd-byte + * word & long accesses, but all 80x86 CPUs do. + */ + +typedef void far * EMSPTR; + +typedef union { /* EMS move specification structure */ + long length; /* It's easy to access first 4 bytes */ + char bytes[18]; /* Misaligned fields in here! */ + } EMSspec; + +/* Macros for accessing misaligned fields */ +#define FIELD_AT(spec,offset,type) (*((type *) &(spec.bytes[offset]))) +#define SRC_TYPE(spec) FIELD_AT(spec,4,char) +#define SRC_HANDLE(spec) FIELD_AT(spec,5,EMSH) +#define SRC_OFFSET(spec) FIELD_AT(spec,7,unsigned short) +#define SRC_PAGE(spec) FIELD_AT(spec,9,unsigned short) +#define SRC_PTR(spec) FIELD_AT(spec,7,EMSPTR) +#define DST_TYPE(spec) FIELD_AT(spec,11,char) +#define DST_HANDLE(spec) FIELD_AT(spec,12,EMSH) +#define DST_OFFSET(spec) FIELD_AT(spec,14,unsigned short) +#define DST_PAGE(spec) FIELD_AT(spec,16,unsigned short) +#define DST_PTR(spec) FIELD_AT(spec,14,EMSPTR) + +#define EMSPAGESIZE 16384L /* gospel, see the EMS specs */ + +#define HIBYTE(W) (((W) >> 8) & 0xFF) +#define LOBYTE(W) ((W) & 0xFF) + + +METHODDEF(void) +read_ems_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + EMScontext ctx; + EMSspec spec; + + spec.length = byte_count; + SRC_TYPE(spec) = 1; + SRC_HANDLE(spec) = info->handle.ems_handle; + SRC_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); + SRC_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); + DST_TYPE(spec) = 0; + DST_HANDLE(spec) = 0; + DST_PTR(spec) = buffer_address; + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x5700; /* move memory region */ + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + ERREXIT(cinfo, JERR_EMS_READ); +} + + +METHODDEF(void) +write_ems_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + EMScontext ctx; + EMSspec spec; + + spec.length = byte_count; + SRC_TYPE(spec) = 0; + SRC_HANDLE(spec) = 0; + SRC_PTR(spec) = buffer_address; + DST_TYPE(spec) = 1; + DST_HANDLE(spec) = info->handle.ems_handle; + DST_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); + DST_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x5700; /* move memory region */ + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + ERREXIT(cinfo, JERR_EMS_WRITE); +} + + +METHODDEF(void) +close_ems_store (j_common_ptr cinfo, backing_store_ptr info) +{ + EMScontext ctx; + + ctx.ax = 0x4500; + ctx.dx = info->handle.ems_handle; + jems_calldriver((EMScontext far *) & ctx); + TRACEMS1(cinfo, 1, JTRC_EMS_CLOSE, info->handle.ems_handle); + /* we ignore any error return from the driver */ +} + + +LOCAL(boolean) +open_ems_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + EMScontext ctx; + + /* Is EMS driver there? */ + if (! jems_available()) + return FALSE; + + /* Get status, make sure EMS is OK */ + ctx.ax = 0x4000; + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + return FALSE; + + /* Get version, must be >= 4.0 */ + ctx.ax = 0x4600; + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0 || LOBYTE(ctx.ax) < 0x40) + return FALSE; + + /* Try to allocate requested space */ + ctx.ax = 0x4300; + ctx.bx = (unsigned short) ((total_bytes_needed + EMSPAGESIZE-1L) / EMSPAGESIZE); + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + return FALSE; + + /* Succeeded, save the handle and away we go */ + info->handle.ems_handle = ctx.dx; + info->read_backing_store = read_ems_store; + info->write_backing_store = write_ems_store; + info->close_backing_store = close_ems_store; + TRACEMS1(cinfo, 1, JTRC_EMS_OPEN, ctx.dx); + return TRUE; /* succeeded */ +} + +#endif /* EMS_SUPPORTED */ + + +/* + * Initial opening of a backing-store object. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + /* Try extended memory, then expanded memory, then regular file. */ +#if XMS_SUPPORTED + if (open_xms_store(cinfo, info, total_bytes_needed)) + return; +#endif +#if EMS_SUPPORTED + if (open_ems_store(cinfo, info, total_bytes_needed)) + return; +#endif + if (open_file_store(cinfo, info, total_bytes_needed)) + return; + ERREXITS(cinfo, JERR_TFILE_CREATE, ""); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + next_file_num = 0; /* initialize temp file name generator */ + return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* Microsoft C, at least in v6.00A, will not successfully reclaim freed + * blocks of size > 32Kbytes unless we give it a kick in the rear, like so: + */ +#ifdef NEED_FHEAPMIN + _fheapmin(); +#endif +} diff --git a/src/SDL2/external/jpeg-9/jmemdosa.asm b/src/SDL2/external/jpeg-9/jmemdosa.asm new file mode 100644 index 000000000..ecd43729f --- /dev/null +++ b/src/SDL2/external/jpeg-9/jmemdosa.asm @@ -0,0 +1,379 @@ +; +; jmemdosa.asm +; +; Copyright (C) 1992, Thomas G. Lane. +; This file is part of the Independent JPEG Group's software. +; For conditions of distribution and use, see the accompanying README file. +; +; This file contains low-level interface routines to support the MS-DOS +; backing store manager (jmemdos.c). Routines are provided to access disk +; files through direct DOS calls, and to access XMS and EMS drivers. +; +; This file should assemble with Microsoft's MASM or any compatible +; assembler (including Borland's Turbo Assembler). If you haven't got +; a compatible assembler, better fall back to jmemansi.c or jmemname.c. +; +; To minimize dependence on the C compiler's register usage conventions, +; we save and restore all 8086 registers, even though most compilers only +; require SI,DI,DS to be preserved. Also, we use only 16-bit-wide return +; values, which everybody returns in AX. +; +; Based on code contributed by Ge' Weijers. +; + +JMEMDOSA_TXT segment byte public 'CODE' + + assume cs:JMEMDOSA_TXT + + public _jdos_open + public _jdos_close + public _jdos_seek + public _jdos_read + public _jdos_write + public _jxms_getdriver + public _jxms_calldriver + public _jems_available + public _jems_calldriver + +; +; short far jdos_open (short far * handle, char far * filename) +; +; Create and open a temporary file +; +_jdos_open proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov cx,0 ; normal file attributes + lds dx,dword ptr [bp+10] ; get filename pointer + mov ah,3ch ; create file + int 21h + jc open_err ; if failed, return error code + lds bx,dword ptr [bp+6] ; get handle pointer + mov word ptr [bx],ax ; save the handle + xor ax,ax ; return zero for OK +open_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_open endp + + +; +; short far jdos_close (short handle) +; +; Close the file handle +; +_jdos_close proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + mov ah,3eh ; close file + int 21h + jc close_err ; if failed, return error code + xor ax,ax ; return zero for OK +close_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_close endp + + +; +; short far jdos_seek (short handle, long offset) +; +; Set file position +; +_jdos_seek proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + mov dx,word ptr [bp+8] ; LS offset + mov cx,word ptr [bp+10] ; MS offset + mov ax,4200h ; absolute seek + int 21h + jc seek_err ; if failed, return error code + xor ax,ax ; return zero for OK +seek_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_seek endp + + +; +; short far jdos_read (short handle, void far * buffer, unsigned short count) +; +; Read from file +; +_jdos_read proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + lds dx,dword ptr [bp+8] ; buffer address + mov cx,word ptr [bp+12] ; number of bytes + mov ah,3fh ; read file + int 21h + jc read_err ; if failed, return error code + cmp ax,word ptr [bp+12] ; make sure all bytes were read + je read_ok + mov ax,1 ; else return 1 for not OK + jmp short read_err +read_ok: xor ax,ax ; return zero for OK +read_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_read endp + + +; +; short far jdos_write (short handle, void far * buffer, unsigned short count) +; +; Write to file +; +_jdos_write proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + lds dx,dword ptr [bp+8] ; buffer address + mov cx,word ptr [bp+12] ; number of bytes + mov ah,40h ; write file + int 21h + jc write_err ; if failed, return error code + cmp ax,word ptr [bp+12] ; make sure all bytes written + je write_ok + mov ax,1 ; else return 1 for not OK + jmp short write_err +write_ok: xor ax,ax ; return zero for OK +write_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_write endp + + +; +; void far jxms_getdriver (XMSDRIVER far *) +; +; Get the address of the XMS driver, or NULL if not available +; +_jxms_getdriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov ax,4300h ; call multiplex interrupt with + int 2fh ; a magic cookie, hex 4300 + cmp al,80h ; AL should contain hex 80 + je xmsavail + xor dx,dx ; no XMS driver available + xor ax,ax ; return a nil pointer + jmp short xmsavail_done +xmsavail: mov ax,4310h ; fetch driver address with + int 2fh ; another magic cookie + mov dx,es ; copy address to dx:ax + mov ax,bx +xmsavail_done: les bx,dword ptr [bp+6] ; get pointer to return value + mov word ptr es:[bx],ax + mov word ptr es:[bx+2],dx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jxms_getdriver endp + + +; +; void far jxms_calldriver (XMSDRIVER, XMScontext far *) +; +; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers. +; These are loaded, the XMS call is performed, and the new values of the +; AX,DX,BX registers are written back to the context structure. +; +_jxms_calldriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + les bx,dword ptr [bp+10] ; get XMScontext pointer + mov ax,word ptr es:[bx] ; load registers + mov dx,word ptr es:[bx+2] + mov si,word ptr es:[bx+6] + mov ds,word ptr es:[bx+8] + mov bx,word ptr es:[bx+4] + call dword ptr [bp+6] ; call the driver + mov cx,bx ; save returned BX for a sec + les bx,dword ptr [bp+10] ; get XMScontext pointer + mov word ptr es:[bx],ax ; put back ax,dx,bx + mov word ptr es:[bx+2],dx + mov word ptr es:[bx+4],cx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jxms_calldriver endp + + +; +; short far jems_available (void) +; +; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs) +; +_jems_available proc far + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov ax,3567h ; get interrupt vector 67h + int 21h + push cs + pop ds + mov di,000ah ; check offs 10 in returned seg + lea si,ASCII_device_name ; against literal string + mov cx,8 + cld + repe cmpsb + jne no_ems + mov ax,1 ; match, it's there + jmp short avail_done +no_ems: xor ax,ax ; it's not there +avail_done: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + ret + +ASCII_device_name db "EMMXXXX0" + +_jems_available endp + + +; +; void far jems_calldriver (EMScontext far *) +; +; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers. +; These are loaded, the EMS trap is performed, and the new values of the +; AX,DX,BX registers are written back to the context structure. +; +_jems_calldriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + les bx,dword ptr [bp+6] ; get EMScontext pointer + mov ax,word ptr es:[bx] ; load registers + mov dx,word ptr es:[bx+2] + mov si,word ptr es:[bx+6] + mov ds,word ptr es:[bx+8] + mov bx,word ptr es:[bx+4] + int 67h ; call the EMS driver + mov cx,bx ; save returned BX for a sec + les bx,dword ptr [bp+6] ; get EMScontext pointer + mov word ptr es:[bx],ax ; put back ax,dx,bx + mov word ptr es:[bx+2],dx + mov word ptr es:[bx+4],cx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jems_calldriver endp + +JMEMDOSA_TXT ends + + end diff --git a/src/SDL2/external/jpeg-9/jmemmac.c b/src/SDL2/external/jpeg-9/jmemmac.c new file mode 100644 index 000000000..106f9bea0 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jmemmac.c @@ -0,0 +1,289 @@ +/* + * jmemmac.c + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * jmemmac.c provides an Apple Macintosh implementation of the system- + * dependent portion of the JPEG memory manager. + * + * If you use jmemmac.c, then you must define USE_MAC_MEMMGR in the + * JPEG_INTERNALS part of jconfig.h. + * + * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr + * instead of malloc and free. It accurately determines the amount of + * memory available by using CompactMem. Notice that if left to its + * own devices, this code can chew up all available space in the + * application's zone, with the exception of the rather small "slop" + * factor computed in jpeg_mem_available(). The application can ensure + * that more space is left over by reducing max_memory_to_use. + * + * Large images are swapped to disk using temporary files and System 7.0+'s + * temporary folder functionality. + * + * Note that jmemmac.c depends on two features of MacOS that were first + * introduced in System 7: FindFolder and the FSSpec-based calls. + * If your application uses jmemmac.c and is run under System 6 or earlier, + * and the jpeg library decides it needs a temporary file, it will abort, + * printing error messages about requiring System 7. (If no temporary files + * are created, it will run fine.) + * + * If you want to use jmemmac.c in an application that might be used with + * System 6 or earlier, then you should remove dependencies on FindFolder + * and the FSSpec calls. You will need to replace FindFolder with some + * other mechanism for finding a place to put temporary files, and you + * should replace the FSSpec calls with their HFS equivalents: + * + * FSpDelete -> HDelete + * FSpGetFInfo -> HGetFInfo + * FSpCreate -> HCreate + * FSpOpenDF -> HOpen *** Note: not HOpenDF *** + * FSMakeFSSpec -> (fill in spec by hand.) + * + * (Use HOpen instead of HOpenDF. HOpen is just a glue-interface to PBHOpen, + * which is on all HFS macs. HOpenDF is a System 7 addition which avoids the + * ages-old problem of names starting with a period.) + * + * Contributed by Sam Bushell (jsam@iagu.on.net) and + * Dan Gildor (gyld@in-touch.com). + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef USE_MAC_MEMMGR /* make sure user got configuration right */ + You forgot to define USE_MAC_MEMMGR in jconfig.h. /* deliberate syntax error */ +#endif + +#include /* we use the MacOS memory manager */ +#include /* we use the MacOS File stuff */ +#include /* we use the MacOS HFS stuff */ +#include /* for smSystemScript */ +#include /* we use Gestalt to test for specific functionality */ + +#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ +#define TEMP_FILE_NAME "JPG%03d.TMP" +#endif + +static int next_file_num; /* to distinguish among several temp files */ + + +/* + * Memory allocation and freeing are controlled by the MacOS library + * routines NewPtr() and DisposePtr(), which allocate fixed-address + * storage. Unfortunately, the IJG library isn't smart enough to cope + * with relocatable storage. + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) NewPtr(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + DisposePtr((Ptr) object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: we include FAR keywords in the routine declarations simply for + * consistency with the rest of the IJG code; FAR should expand to empty + * on rational architectures like the Mac. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) NewPtr(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + DisposePtr((Ptr) object); +} + + +/* + * This routine computes the total memory space available for allocation. + */ + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + long limit = cinfo->mem->max_memory_to_use - already_allocated; + long slop, mem; + + /* Don't ask for more than what application has told us we may use */ + if (max_bytes_needed > limit && limit > 0) + max_bytes_needed = limit; + /* Find whether there's a big enough free block in the heap. + * CompactMem tries to create a contiguous block of the requested size, + * and then returns the size of the largest free block (which could be + * much more or much less than we asked for). + * We add some slop to ensure we don't use up all available memory. + */ + slop = max_bytes_needed / 16 + 32768L; + mem = CompactMem(max_bytes_needed + slop) - slop; + if (mem < 0) + mem = 0; /* sigh, couldn't even get the slop */ + /* Don't take more than the application says we can have */ + if (mem > limit && limit > 0) + mem = limit; + return mem; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + + +METHODDEF(void) +read_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + long bytes = byte_count; + long retVal; + + if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr ) + ERREXIT(cinfo, JERR_TFILE_SEEK); + + retVal = FSRead ( info->temp_file, &bytes, + (unsigned char *) buffer_address ); + if ( retVal != noErr || bytes != byte_count ) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + long bytes = byte_count; + long retVal; + + if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr ) + ERREXIT(cinfo, JERR_TFILE_SEEK); + + retVal = FSWrite ( info->temp_file, &bytes, + (unsigned char *) buffer_address ); + if ( retVal != noErr || bytes != byte_count ) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_backing_store (j_common_ptr cinfo, backing_store_ptr info) +{ + FSClose ( info->temp_file ); + FSpDelete ( &(info->tempSpec) ); +} + + +/* + * Initial opening of a backing-store object. + * + * This version uses FindFolder to find the Temporary Items folder, + * and puts the temporary file in there. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + short tmpRef, vRefNum; + long dirID; + FInfo finderInfo; + FSSpec theSpec; + Str255 fName; + OSErr osErr; + long gestaltResponse = 0; + + /* Check that FSSpec calls are available. */ + osErr = Gestalt( gestaltFSAttr, &gestaltResponse ); + if ( ( osErr != noErr ) + || !( gestaltResponse & (1<temp_name, TEMP_FILE_NAME, next_file_num); + strcpy ( (Ptr)fName+1, info->temp_name ); + *fName = strlen (info->temp_name); + osErr = FSMakeFSSpec ( vRefNum, dirID, fName, &theSpec ); + + if ( (osErr = FSpGetFInfo ( &theSpec, &finderInfo ) ) != noErr ) + break; + } + + osErr = FSpCreate ( &theSpec, '????', '????', smSystemScript ); + if ( osErr != noErr ) + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + + osErr = FSpOpenDF ( &theSpec, fsRdWrPerm, &(info->temp_file) ); + if ( osErr != noErr ) + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + + info->tempSpec = theSpec; + + info->read_backing_store = read_backing_store; + info->write_backing_store = write_backing_store; + info->close_backing_store = close_backing_store; + TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + next_file_num = 0; + + /* max_memory_to_use will be initialized to FreeMem()'s result; + * the calling application might later reduce it, for example + * to leave room to invoke multiple JPEG objects. + * Note that FreeMem returns the total number of free bytes; + * it may not be possible to allocate a single block of this size. + */ + return FreeMem(); +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/src/SDL2/external/jpeg-9/jmemmgr.c b/src/SDL2/external/jpeg-9/jmemmgr.c new file mode 100644 index 000000000..0a137cdde --- /dev/null +++ b/src/SDL2/external/jpeg-9/jmemmgr.c @@ -0,0 +1,1119 @@ +/* + * jmemmgr.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2011-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the JPEG system-independent memory management + * routines. This code is usable across a wide variety of machines; most + * of the system dependencies have been isolated in a separate file. + * The major functions provided here are: + * * pool-based allocation and freeing of memory; + * * policy decisions about how to divide available memory among the + * virtual arrays; + * * control logic for swapping virtual arrays between main memory and + * backing storage. + * The separate system-dependent file provides the actual backing-storage + * access code, and it contains the policy decision about how much total + * main memory to use. + * This file is system-dependent in the sense that some of its functions + * are unnecessary in some systems. For example, if there is enough virtual + * memory so that backing storage will never be used, much of the virtual + * array control logic could be removed. (Of course, if you have that much + * memory then you shouldn't care about a little bit of unused code...) + */ + +#define JPEG_INTERNALS +#define AM_MEMORY_MANAGER /* we define jvirt_Xarray_control structs */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef NO_GETENV +#ifndef HAVE_STDLIB_H /* should declare getenv() */ +extern char * getenv JPP((const char * name)); +#endif +#endif + + +/* + * Some important notes: + * The allocation routines provided here must never return NULL. + * They should exit to error_exit if unsuccessful. + * + * It's not a good idea to try to merge the sarray and barray routines, + * even though they are textually almost the same, because samples are + * usually stored as bytes while coefficients are shorts or ints. Thus, + * in machines where byte pointers have a different representation from + * word pointers, the resulting machine code could not be the same. + */ + + +/* + * Many machines require storage alignment: longs must start on 4-byte + * boundaries, doubles on 8-byte boundaries, etc. On such machines, malloc() + * always returns pointers that are multiples of the worst-case alignment + * requirement, and we had better do so too. + * There isn't any really portable way to determine the worst-case alignment + * requirement. This module assumes that the alignment requirement is + * multiples of sizeof(ALIGN_TYPE). + * By default, we define ALIGN_TYPE as double. This is necessary on some + * workstations (where doubles really do need 8-byte alignment) and will work + * fine on nearly everything. If your machine has lesser alignment needs, + * you can save a few bytes by making ALIGN_TYPE smaller. + * The only place I know of where this will NOT work is certain Macintosh + * 680x0 compilers that define double as a 10-byte IEEE extended float. + * Doing 10-byte alignment is counterproductive because longwords won't be + * aligned well. Put "#define ALIGN_TYPE long" in jconfig.h if you have + * such a compiler. + */ + +#ifndef ALIGN_TYPE /* so can override from jconfig.h */ +#define ALIGN_TYPE double +#endif + + +/* + * We allocate objects from "pools", where each pool is gotten with a single + * request to jpeg_get_small() or jpeg_get_large(). There is no per-object + * overhead within a pool, except for alignment padding. Each pool has a + * header with a link to the next pool of the same class. + * Small and large pool headers are identical except that the latter's + * link pointer must be FAR on 80x86 machines. + * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE + * field. This forces the compiler to make SIZEOF(small_pool_hdr) a multiple + * of the alignment requirement of ALIGN_TYPE. + */ + +typedef union small_pool_struct * small_pool_ptr; + +typedef union small_pool_struct { + struct { + small_pool_ptr next; /* next in list of pools */ + size_t bytes_used; /* how many bytes already used within pool */ + size_t bytes_left; /* bytes still available in this pool */ + } hdr; + ALIGN_TYPE dummy; /* included in union to ensure alignment */ +} small_pool_hdr; + +typedef union large_pool_struct FAR * large_pool_ptr; + +typedef union large_pool_struct { + struct { + large_pool_ptr next; /* next in list of pools */ + size_t bytes_used; /* how many bytes already used within pool */ + size_t bytes_left; /* bytes still available in this pool */ + } hdr; + ALIGN_TYPE dummy; /* included in union to ensure alignment */ +} large_pool_hdr; + + +/* + * Here is the full definition of a memory manager object. + */ + +typedef struct { + struct jpeg_memory_mgr pub; /* public fields */ + + /* Each pool identifier (lifetime class) names a linked list of pools. */ + small_pool_ptr small_list[JPOOL_NUMPOOLS]; + large_pool_ptr large_list[JPOOL_NUMPOOLS]; + + /* Since we only have one lifetime class of virtual arrays, only one + * linked list is necessary (for each datatype). Note that the virtual + * array control blocks being linked together are actually stored somewhere + * in the small-pool list. + */ + jvirt_sarray_ptr virt_sarray_list; + jvirt_barray_ptr virt_barray_list; + + /* This counts total space obtained from jpeg_get_small/large */ + long total_space_allocated; + + /* alloc_sarray and alloc_barray set this value for use by virtual + * array routines. + */ + JDIMENSION last_rowsperchunk; /* from most recent alloc_sarray/barray */ +} my_memory_mgr; + +typedef my_memory_mgr * my_mem_ptr; + + +/* + * The control blocks for virtual arrays. + * Note that these blocks are allocated in the "small" pool area. + * System-dependent info for the associated backing store (if any) is hidden + * inside the backing_store_info struct. + */ + +struct jvirt_sarray_control { + JSAMPARRAY mem_buffer; /* => the in-memory buffer */ + JDIMENSION rows_in_array; /* total virtual array height */ + JDIMENSION samplesperrow; /* width of array (and of memory buffer) */ + JDIMENSION maxaccess; /* max rows accessed by access_virt_sarray */ + JDIMENSION rows_in_mem; /* height of memory buffer */ + JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ + JDIMENSION cur_start_row; /* first logical row # in the buffer */ + JDIMENSION first_undef_row; /* row # of first uninitialized row */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ + jvirt_sarray_ptr next; /* link to next virtual sarray control block */ + backing_store_info b_s_info; /* System-dependent control info */ +}; + +struct jvirt_barray_control { + JBLOCKARRAY mem_buffer; /* => the in-memory buffer */ + JDIMENSION rows_in_array; /* total virtual array height */ + JDIMENSION blocksperrow; /* width of array (and of memory buffer) */ + JDIMENSION maxaccess; /* max rows accessed by access_virt_barray */ + JDIMENSION rows_in_mem; /* height of memory buffer */ + JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ + JDIMENSION cur_start_row; /* first logical row # in the buffer */ + JDIMENSION first_undef_row; /* row # of first uninitialized row */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ + jvirt_barray_ptr next; /* link to next virtual barray control block */ + backing_store_info b_s_info; /* System-dependent control info */ +}; + + +#ifdef MEM_STATS /* optional extra stuff for statistics */ + +LOCAL(void) +print_mem_stats (j_common_ptr cinfo, int pool_id) +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr shdr_ptr; + large_pool_ptr lhdr_ptr; + + /* Since this is only a debugging stub, we can cheat a little by using + * fprintf directly rather than going through the trace message code. + * This is helpful because message parm array can't handle longs. + */ + fprintf(stderr, "Freeing pool %d, total space = %ld\n", + pool_id, mem->total_space_allocated); + + for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL; + lhdr_ptr = lhdr_ptr->hdr.next) { + fprintf(stderr, " Large chunk used %ld\n", + (long) lhdr_ptr->hdr.bytes_used); + } + + for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL; + shdr_ptr = shdr_ptr->hdr.next) { + fprintf(stderr, " Small chunk used %ld free %ld\n", + (long) shdr_ptr->hdr.bytes_used, + (long) shdr_ptr->hdr.bytes_left); + } +} + +#endif /* MEM_STATS */ + + +LOCAL(noreturn_t) +out_of_memory (j_common_ptr cinfo, int which) +/* Report an out-of-memory error and stop execution */ +/* If we compiled MEM_STATS support, report alloc requests before dying */ +{ +#ifdef MEM_STATS + cinfo->err->trace_level = 2; /* force self_destruct to report stats */ +#endif + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, which); +} + + +/* + * Allocation of "small" objects. + * + * For these, we use pooled storage. When a new pool must be created, + * we try to get enough space for the current request plus a "slop" factor, + * where the slop will be the amount of leftover space in the new pool. + * The speed vs. space tradeoff is largely determined by the slop values. + * A different slop value is provided for each pool class (lifetime), + * and we also distinguish the first pool of a class from later ones. + * NOTE: the values given work fairly well on both 16- and 32-bit-int + * machines, but may be too small if longs are 64 bits or more. + */ + +static const size_t first_pool_slop[JPOOL_NUMPOOLS] = +{ + 1600, /* first PERMANENT pool */ + 16000 /* first IMAGE pool */ +}; + +static const size_t extra_pool_slop[JPOOL_NUMPOOLS] = +{ + 0, /* additional PERMANENT pools */ + 5000 /* additional IMAGE pools */ +}; + +#define MIN_SLOP 50 /* greater than 0 to avoid futile looping */ + + +METHODDEF(void *) +alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject) +/* Allocate a "small" object */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr hdr_ptr, prev_hdr_ptr; + char * data_ptr; + size_t odd_bytes, min_request, slop; + + /* Check for unsatisfiable request (do now to ensure no overflow below) */ + if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr))) + out_of_memory(cinfo, 1); /* request exceeds malloc's ability */ + + /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ + odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); + if (odd_bytes > 0) + sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; + + /* See if space is available in any existing pool */ + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + prev_hdr_ptr = NULL; + hdr_ptr = mem->small_list[pool_id]; + while (hdr_ptr != NULL) { + if (hdr_ptr->hdr.bytes_left >= sizeofobject) + break; /* found pool with enough space */ + prev_hdr_ptr = hdr_ptr; + hdr_ptr = hdr_ptr->hdr.next; + } + + /* Time to make a new pool? */ + if (hdr_ptr == NULL) { + /* min_request is what we need now, slop is what will be leftover */ + min_request = sizeofobject + SIZEOF(small_pool_hdr); + if (prev_hdr_ptr == NULL) /* first pool in class? */ + slop = first_pool_slop[pool_id]; + else + slop = extra_pool_slop[pool_id]; + /* Don't ask for more than MAX_ALLOC_CHUNK */ + if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request)) + slop = (size_t) (MAX_ALLOC_CHUNK-min_request); + /* Try to get space, if fail reduce slop and try again */ + for (;;) { + hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop); + if (hdr_ptr != NULL) + break; + slop /= 2; + if (slop < MIN_SLOP) /* give up when it gets real small */ + out_of_memory(cinfo, 2); /* jpeg_get_small failed */ + } + mem->total_space_allocated += min_request + slop; + /* Success, initialize the new pool header and add to end of list */ + hdr_ptr->hdr.next = NULL; + hdr_ptr->hdr.bytes_used = 0; + hdr_ptr->hdr.bytes_left = sizeofobject + slop; + if (prev_hdr_ptr == NULL) /* first pool in class? */ + mem->small_list[pool_id] = hdr_ptr; + else + prev_hdr_ptr->hdr.next = hdr_ptr; + } + + /* OK, allocate the object from the current pool */ + data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */ + data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */ + hdr_ptr->hdr.bytes_used += sizeofobject; + hdr_ptr->hdr.bytes_left -= sizeofobject; + + return (void *) data_ptr; +} + + +/* + * Allocation of "large" objects. + * + * The external semantics of these are the same as "small" objects, + * except that FAR pointers are used on 80x86. However the pool + * management heuristics are quite different. We assume that each + * request is large enough that it may as well be passed directly to + * jpeg_get_large; the pool management just links everything together + * so that we can free it all on demand. + * Note: the major use of "large" objects is in JSAMPARRAY and JBLOCKARRAY + * structures. The routines that create these structures (see below) + * deliberately bunch rows together to ensure a large request size. + */ + +METHODDEF(void FAR *) +alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject) +/* Allocate a "large" object */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + large_pool_ptr hdr_ptr; + size_t odd_bytes; + + /* Check for unsatisfiable request (do now to ensure no overflow below) */ + if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr))) + out_of_memory(cinfo, 3); /* request exceeds malloc's ability */ + + /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ + odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); + if (odd_bytes > 0) + sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; + + /* Always make a new pool */ + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject + + SIZEOF(large_pool_hdr)); + if (hdr_ptr == NULL) + out_of_memory(cinfo, 4); /* jpeg_get_large failed */ + mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr); + + /* Success, initialize the new pool header and add to list */ + hdr_ptr->hdr.next = mem->large_list[pool_id]; + /* We maintain space counts in each pool header for statistical purposes, + * even though they are not needed for allocation. + */ + hdr_ptr->hdr.bytes_used = sizeofobject; + hdr_ptr->hdr.bytes_left = 0; + mem->large_list[pool_id] = hdr_ptr; + + return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */ +} + + +/* + * Creation of 2-D sample arrays. + * The pointers are in near heap, the samples themselves in FAR heap. + * + * To minimize allocation overhead and to allow I/O of large contiguous + * blocks, we allocate the sample rows in groups of as many rows as possible + * without exceeding MAX_ALLOC_CHUNK total bytes per allocation request. + * NB: the virtual array control routines, later in this file, know about + * this chunking of rows. The rowsperchunk value is left in the mem manager + * object so that it can be saved away if this sarray is the workspace for + * a virtual array. + */ + +METHODDEF(JSAMPARRAY) +alloc_sarray (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, JDIMENSION numrows) +/* Allocate a 2-D sample array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + JSAMPARRAY result; + JSAMPROW workspace; + JDIMENSION rowsperchunk, currow, i; + long ltemp; + + /* Calculate max # of rows allowed in one allocation chunk */ + ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ((long) samplesperrow * SIZEOF(JSAMPLE)); + if (ltemp <= 0) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + if (ltemp < (long) numrows) + rowsperchunk = (JDIMENSION) ltemp; + else + rowsperchunk = numrows; + mem->last_rowsperchunk = rowsperchunk; + + /* Get space for row pointers (small object) */ + result = (JSAMPARRAY) alloc_small(cinfo, pool_id, + (size_t) (numrows * SIZEOF(JSAMPROW))); + + /* Get the rows themselves (large objects) */ + currow = 0; + while (currow < numrows) { + rowsperchunk = MIN(rowsperchunk, numrows - currow); + workspace = (JSAMPROW) alloc_large(cinfo, pool_id, + (size_t) ((size_t) rowsperchunk * (size_t) samplesperrow + * SIZEOF(JSAMPLE))); + for (i = rowsperchunk; i > 0; i--) { + result[currow++] = workspace; + workspace += samplesperrow; + } + } + + return result; +} + + +/* + * Creation of 2-D coefficient-block arrays. + * This is essentially the same as the code for sample arrays, above. + */ + +METHODDEF(JBLOCKARRAY) +alloc_barray (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, JDIMENSION numrows) +/* Allocate a 2-D coefficient-block array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + JBLOCKARRAY result; + JBLOCKROW workspace; + JDIMENSION rowsperchunk, currow, i; + long ltemp; + + /* Calculate max # of rows allowed in one allocation chunk */ + ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ((long) blocksperrow * SIZEOF(JBLOCK)); + if (ltemp <= 0) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + if (ltemp < (long) numrows) + rowsperchunk = (JDIMENSION) ltemp; + else + rowsperchunk = numrows; + mem->last_rowsperchunk = rowsperchunk; + + /* Get space for row pointers (small object) */ + result = (JBLOCKARRAY) alloc_small(cinfo, pool_id, + (size_t) (numrows * SIZEOF(JBLOCKROW))); + + /* Get the rows themselves (large objects) */ + currow = 0; + while (currow < numrows) { + rowsperchunk = MIN(rowsperchunk, numrows - currow); + workspace = (JBLOCKROW) alloc_large(cinfo, pool_id, + (size_t) ((size_t) rowsperchunk * (size_t) blocksperrow + * SIZEOF(JBLOCK))); + for (i = rowsperchunk; i > 0; i--) { + result[currow++] = workspace; + workspace += blocksperrow; + } + } + + return result; +} + + +/* + * About virtual array management: + * + * The above "normal" array routines are only used to allocate strip buffers + * (as wide as the image, but just a few rows high). Full-image-sized buffers + * are handled as "virtual" arrays. The array is still accessed a strip at a + * time, but the memory manager must save the whole array for repeated + * accesses. The intended implementation is that there is a strip buffer in + * memory (as high as is possible given the desired memory limit), plus a + * backing file that holds the rest of the array. + * + * The request_virt_array routines are told the total size of the image and + * the maximum number of rows that will be accessed at once. The in-memory + * buffer must be at least as large as the maxaccess value. + * + * The request routines create control blocks but not the in-memory buffers. + * That is postponed until realize_virt_arrays is called. At that time the + * total amount of space needed is known (approximately, anyway), so free + * memory can be divided up fairly. + * + * The access_virt_array routines are responsible for making a specific strip + * area accessible (after reading or writing the backing file, if necessary). + * Note that the access routines are told whether the caller intends to modify + * the accessed strip; during a read-only pass this saves having to rewrite + * data to disk. The access routines are also responsible for pre-zeroing + * any newly accessed rows, if pre-zeroing was requested. + * + * In current usage, the access requests are usually for nonoverlapping + * strips; that is, successive access start_row numbers differ by exactly + * num_rows = maxaccess. This means we can get good performance with simple + * buffer dump/reload logic, by making the in-memory buffer be a multiple + * of the access height; then there will never be accesses across bufferload + * boundaries. The code will still work with overlapping access requests, + * but it doesn't handle bufferload overlaps very efficiently. + */ + + +METHODDEF(jvirt_sarray_ptr) +request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION samplesperrow, JDIMENSION numrows, + JDIMENSION maxaccess) +/* Request a virtual 2-D sample array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + jvirt_sarray_ptr result; + + /* Only IMAGE-lifetime virtual arrays are currently supported */ + if (pool_id != JPOOL_IMAGE) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + /* get control block */ + result = (jvirt_sarray_ptr) alloc_small(cinfo, pool_id, + SIZEOF(struct jvirt_sarray_control)); + + result->mem_buffer = NULL; /* marks array not yet realized */ + result->rows_in_array = numrows; + result->samplesperrow = samplesperrow; + result->maxaccess = maxaccess; + result->pre_zero = pre_zero; + result->b_s_open = FALSE; /* no associated backing-store object */ + result->next = mem->virt_sarray_list; /* add to list of virtual arrays */ + mem->virt_sarray_list = result; + + return result; +} + + +METHODDEF(jvirt_barray_ptr) +request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION blocksperrow, JDIMENSION numrows, + JDIMENSION maxaccess) +/* Request a virtual 2-D coefficient-block array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + jvirt_barray_ptr result; + + /* Only IMAGE-lifetime virtual arrays are currently supported */ + if (pool_id != JPOOL_IMAGE) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + /* get control block */ + result = (jvirt_barray_ptr) alloc_small(cinfo, pool_id, + SIZEOF(struct jvirt_barray_control)); + + result->mem_buffer = NULL; /* marks array not yet realized */ + result->rows_in_array = numrows; + result->blocksperrow = blocksperrow; + result->maxaccess = maxaccess; + result->pre_zero = pre_zero; + result->b_s_open = FALSE; /* no associated backing-store object */ + result->next = mem->virt_barray_list; /* add to list of virtual arrays */ + mem->virt_barray_list = result; + + return result; +} + + +METHODDEF(void) +realize_virt_arrays (j_common_ptr cinfo) +/* Allocate the in-memory buffers for any unrealized virtual arrays */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + long space_per_minheight, maximum_space, avail_mem; + long minheights, max_minheights; + jvirt_sarray_ptr sptr; + jvirt_barray_ptr bptr; + + /* Compute the minimum space needed (maxaccess rows in each buffer) + * and the maximum space needed (full image height in each buffer). + * These may be of use to the system-dependent jpeg_mem_available routine. + */ + space_per_minheight = 0; + maximum_space = 0; + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->mem_buffer == NULL) { /* if not realized yet */ + space_per_minheight += (long) sptr->maxaccess * + (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + maximum_space += (long) sptr->rows_in_array * + (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + } + } + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->mem_buffer == NULL) { /* if not realized yet */ + space_per_minheight += (long) bptr->maxaccess * + (long) bptr->blocksperrow * SIZEOF(JBLOCK); + maximum_space += (long) bptr->rows_in_array * + (long) bptr->blocksperrow * SIZEOF(JBLOCK); + } + } + + if (space_per_minheight <= 0) + return; /* no unrealized arrays, no work */ + + /* Determine amount of memory to actually use; this is system-dependent. */ + avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space, + mem->total_space_allocated); + + /* If the maximum space needed is available, make all the buffers full + * height; otherwise parcel it out with the same number of minheights + * in each buffer. + */ + if (avail_mem >= maximum_space) + max_minheights = 1000000000L; + else { + max_minheights = avail_mem / space_per_minheight; + /* If there doesn't seem to be enough space, try to get the minimum + * anyway. This allows a "stub" implementation of jpeg_mem_available(). + */ + if (max_minheights <= 0) + max_minheights = 1; + } + + /* Allocate the in-memory buffers and initialize backing store as needed. */ + + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->mem_buffer == NULL) { /* if not realized yet */ + minheights = ((long) sptr->rows_in_array - 1L) / sptr->maxaccess + 1L; + if (minheights <= max_minheights) { + /* This buffer fits in memory */ + sptr->rows_in_mem = sptr->rows_in_array; + } else { + /* It doesn't fit in memory, create backing store. */ + sptr->rows_in_mem = (JDIMENSION) (max_minheights * sptr->maxaccess); + jpeg_open_backing_store(cinfo, & sptr->b_s_info, + (long) sptr->rows_in_array * + (long) sptr->samplesperrow * + (long) SIZEOF(JSAMPLE)); + sptr->b_s_open = TRUE; + } + sptr->mem_buffer = alloc_sarray(cinfo, JPOOL_IMAGE, + sptr->samplesperrow, sptr->rows_in_mem); + sptr->rowsperchunk = mem->last_rowsperchunk; + sptr->cur_start_row = 0; + sptr->first_undef_row = 0; + sptr->dirty = FALSE; + } + } + + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->mem_buffer == NULL) { /* if not realized yet */ + minheights = ((long) bptr->rows_in_array - 1L) / bptr->maxaccess + 1L; + if (minheights <= max_minheights) { + /* This buffer fits in memory */ + bptr->rows_in_mem = bptr->rows_in_array; + } else { + /* It doesn't fit in memory, create backing store. */ + bptr->rows_in_mem = (JDIMENSION) (max_minheights * bptr->maxaccess); + jpeg_open_backing_store(cinfo, & bptr->b_s_info, + (long) bptr->rows_in_array * + (long) bptr->blocksperrow * + (long) SIZEOF(JBLOCK)); + bptr->b_s_open = TRUE; + } + bptr->mem_buffer = alloc_barray(cinfo, JPOOL_IMAGE, + bptr->blocksperrow, bptr->rows_in_mem); + bptr->rowsperchunk = mem->last_rowsperchunk; + bptr->cur_start_row = 0; + bptr->first_undef_row = 0; + bptr->dirty = FALSE; + } + } +} + + +LOCAL(void) +do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing) +/* Do backing store read or write of a virtual sample array */ +{ + long bytesperrow, file_offset, byte_count, rows, thisrow, i; + + bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE); + file_offset = ptr->cur_start_row * bytesperrow; + /* Loop to read or write each allocation chunk in mem_buffer */ + for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { + /* One chunk, but check for short chunk at end of buffer */ + rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); + /* Transfer no more than is currently defined */ + thisrow = (long) ptr->cur_start_row + i; + rows = MIN(rows, (long) ptr->first_undef_row - thisrow); + /* Transfer no more than fits in file */ + rows = MIN(rows, (long) ptr->rows_in_array - thisrow); + if (rows <= 0) /* this chunk might be past end of file! */ + break; + byte_count = rows * bytesperrow; + if (writing) + (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + else + (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + file_offset += byte_count; + } +} + + +LOCAL(void) +do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing) +/* Do backing store read or write of a virtual coefficient-block array */ +{ + long bytesperrow, file_offset, byte_count, rows, thisrow, i; + + bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK); + file_offset = ptr->cur_start_row * bytesperrow; + /* Loop to read or write each allocation chunk in mem_buffer */ + for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { + /* One chunk, but check for short chunk at end of buffer */ + rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); + /* Transfer no more than is currently defined */ + thisrow = (long) ptr->cur_start_row + i; + rows = MIN(rows, (long) ptr->first_undef_row - thisrow); + /* Transfer no more than fits in file */ + rows = MIN(rows, (long) ptr->rows_in_array - thisrow); + if (rows <= 0) /* this chunk might be past end of file! */ + break; + byte_count = rows * bytesperrow; + if (writing) + (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + else + (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + file_offset += byte_count; + } +} + + +METHODDEF(JSAMPARRAY) +access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, + JDIMENSION start_row, JDIMENSION num_rows, + boolean writable) +/* Access the part of a virtual sample array starting at start_row */ +/* and extending for num_rows rows. writable is true if */ +/* caller intends to modify the accessed area. */ +{ + JDIMENSION end_row = start_row + num_rows; + JDIMENSION undef_row; + + /* debugging check */ + if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || + ptr->mem_buffer == NULL) + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + + /* Make the desired part of the virtual array accessible */ + if (start_row < ptr->cur_start_row || + end_row > ptr->cur_start_row+ptr->rows_in_mem) { + if (! ptr->b_s_open) + ERREXIT(cinfo, JERR_VIRTUAL_BUG); + /* Flush old buffer contents if necessary */ + if (ptr->dirty) { + do_sarray_io(cinfo, ptr, TRUE); + ptr->dirty = FALSE; + } + /* Decide what part of virtual array to access. + * Algorithm: if target address > current window, assume forward scan, + * load starting at target address. If target address < current window, + * assume backward scan, load so that target area is top of window. + * Note that when switching from forward write to forward read, will have + * start_row = 0, so the limiting case applies and we load from 0 anyway. + */ + if (start_row > ptr->cur_start_row) { + ptr->cur_start_row = start_row; + } else { + /* use long arithmetic here to avoid overflow & unsigned problems */ + long ltemp; + + ltemp = (long) end_row - (long) ptr->rows_in_mem; + if (ltemp < 0) + ltemp = 0; /* don't fall off front end of file */ + ptr->cur_start_row = (JDIMENSION) ltemp; + } + /* Read in the selected part of the array. + * During the initial write pass, we will do no actual read + * because the selected part is all undefined. + */ + do_sarray_io(cinfo, ptr, FALSE); + } + /* Ensure the accessed part of the array is defined; prezero if needed. + * To improve locality of access, we only prezero the part of the array + * that the caller is about to access, not the entire in-memory array. + */ + if (ptr->first_undef_row < end_row) { + if (ptr->first_undef_row < start_row) { + if (writable) /* writer skipped over a section of array */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + undef_row = start_row; /* but reader is allowed to read ahead */ + } else { + undef_row = ptr->first_undef_row; + } + if (writable) + ptr->first_undef_row = end_row; + if (ptr->pre_zero) { + size_t bytesperrow = (size_t) ptr->samplesperrow * SIZEOF(JSAMPLE); + undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ + end_row -= ptr->cur_start_row; + while (undef_row < end_row) { + FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + undef_row++; + } + } else { + if (! writable) /* reader looking at undefined data */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + } + } + /* Flag the buffer dirty if caller will write in it */ + if (writable) + ptr->dirty = TRUE; + /* Return address of proper part of the buffer */ + return ptr->mem_buffer + (start_row - ptr->cur_start_row); +} + + +METHODDEF(JBLOCKARRAY) +access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, + JDIMENSION start_row, JDIMENSION num_rows, + boolean writable) +/* Access the part of a virtual block array starting at start_row */ +/* and extending for num_rows rows. writable is true if */ +/* caller intends to modify the accessed area. */ +{ + JDIMENSION end_row = start_row + num_rows; + JDIMENSION undef_row; + + /* debugging check */ + if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || + ptr->mem_buffer == NULL) + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + + /* Make the desired part of the virtual array accessible */ + if (start_row < ptr->cur_start_row || + end_row > ptr->cur_start_row+ptr->rows_in_mem) { + if (! ptr->b_s_open) + ERREXIT(cinfo, JERR_VIRTUAL_BUG); + /* Flush old buffer contents if necessary */ + if (ptr->dirty) { + do_barray_io(cinfo, ptr, TRUE); + ptr->dirty = FALSE; + } + /* Decide what part of virtual array to access. + * Algorithm: if target address > current window, assume forward scan, + * load starting at target address. If target address < current window, + * assume backward scan, load so that target area is top of window. + * Note that when switching from forward write to forward read, will have + * start_row = 0, so the limiting case applies and we load from 0 anyway. + */ + if (start_row > ptr->cur_start_row) { + ptr->cur_start_row = start_row; + } else { + /* use long arithmetic here to avoid overflow & unsigned problems */ + long ltemp; + + ltemp = (long) end_row - (long) ptr->rows_in_mem; + if (ltemp < 0) + ltemp = 0; /* don't fall off front end of file */ + ptr->cur_start_row = (JDIMENSION) ltemp; + } + /* Read in the selected part of the array. + * During the initial write pass, we will do no actual read + * because the selected part is all undefined. + */ + do_barray_io(cinfo, ptr, FALSE); + } + /* Ensure the accessed part of the array is defined; prezero if needed. + * To improve locality of access, we only prezero the part of the array + * that the caller is about to access, not the entire in-memory array. + */ + if (ptr->first_undef_row < end_row) { + if (ptr->first_undef_row < start_row) { + if (writable) /* writer skipped over a section of array */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + undef_row = start_row; /* but reader is allowed to read ahead */ + } else { + undef_row = ptr->first_undef_row; + } + if (writable) + ptr->first_undef_row = end_row; + if (ptr->pre_zero) { + size_t bytesperrow = (size_t) ptr->blocksperrow * SIZEOF(JBLOCK); + undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ + end_row -= ptr->cur_start_row; + while (undef_row < end_row) { + FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + undef_row++; + } + } else { + if (! writable) /* reader looking at undefined data */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + } + } + /* Flag the buffer dirty if caller will write in it */ + if (writable) + ptr->dirty = TRUE; + /* Return address of proper part of the buffer */ + return ptr->mem_buffer + (start_row - ptr->cur_start_row); +} + + +/* + * Release all objects belonging to a specified pool. + */ + +METHODDEF(void) +free_pool (j_common_ptr cinfo, int pool_id) +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr shdr_ptr; + large_pool_ptr lhdr_ptr; + size_t space_freed; + + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + +#ifdef MEM_STATS + if (cinfo->err->trace_level > 1) + print_mem_stats(cinfo, pool_id); /* print pool's memory usage statistics */ +#endif + + /* If freeing IMAGE pool, close any virtual arrays first */ + if (pool_id == JPOOL_IMAGE) { + jvirt_sarray_ptr sptr; + jvirt_barray_ptr bptr; + + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->b_s_open) { /* there may be no backing store */ + sptr->b_s_open = FALSE; /* prevent recursive close if error */ + (*sptr->b_s_info.close_backing_store) (cinfo, & sptr->b_s_info); + } + } + mem->virt_sarray_list = NULL; + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->b_s_open) { /* there may be no backing store */ + bptr->b_s_open = FALSE; /* prevent recursive close if error */ + (*bptr->b_s_info.close_backing_store) (cinfo, & bptr->b_s_info); + } + } + mem->virt_barray_list = NULL; + } + + /* Release large objects */ + lhdr_ptr = mem->large_list[pool_id]; + mem->large_list[pool_id] = NULL; + + while (lhdr_ptr != NULL) { + large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next; + space_freed = lhdr_ptr->hdr.bytes_used + + lhdr_ptr->hdr.bytes_left + + SIZEOF(large_pool_hdr); + jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed); + mem->total_space_allocated -= space_freed; + lhdr_ptr = next_lhdr_ptr; + } + + /* Release small objects */ + shdr_ptr = mem->small_list[pool_id]; + mem->small_list[pool_id] = NULL; + + while (shdr_ptr != NULL) { + small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next; + space_freed = shdr_ptr->hdr.bytes_used + + shdr_ptr->hdr.bytes_left + + SIZEOF(small_pool_hdr); + jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed); + mem->total_space_allocated -= space_freed; + shdr_ptr = next_shdr_ptr; + } +} + + +/* + * Close up shop entirely. + * Note that this cannot be called unless cinfo->mem is non-NULL. + */ + +METHODDEF(void) +self_destruct (j_common_ptr cinfo) +{ + int pool; + + /* Close all backing store, release all memory. + * Releasing pools in reverse order might help avoid fragmentation + * with some (brain-damaged) malloc libraries. + */ + for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { + free_pool(cinfo, pool); + } + + /* Release the memory manager control block too. */ + jpeg_free_small(cinfo, (void *) cinfo->mem, SIZEOF(my_memory_mgr)); + cinfo->mem = NULL; /* ensures I will be called only once */ + + jpeg_mem_term(cinfo); /* system-dependent cleanup */ +} + + +/* + * Memory manager initialization. + * When this is called, only the error manager pointer is valid in cinfo! + */ + +GLOBAL(void) +jinit_memory_mgr (j_common_ptr cinfo) +{ + my_mem_ptr mem; + long max_to_use; + int pool; + size_t test_mac; + + cinfo->mem = NULL; /* for safety if init fails */ + + /* Check for configuration errors. + * SIZEOF(ALIGN_TYPE) should be a power of 2; otherwise, it probably + * doesn't reflect any real hardware alignment requirement. + * The test is a little tricky: for X>0, X and X-1 have no one-bits + * in common if and only if X is a power of 2, ie has only one one-bit. + * Some compilers may give an "unreachable code" warning here; ignore it. + */ + if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0) + ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE); + /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be + * a multiple of SIZEOF(ALIGN_TYPE). + * Again, an "unreachable code" warning may be ignored here. + * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK. + */ + test_mac = (size_t) MAX_ALLOC_CHUNK; + if ((long) test_mac != MAX_ALLOC_CHUNK || + (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0) + ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); + + max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */ + + /* Attempt to allocate memory manager's control block */ + mem = (my_mem_ptr) jpeg_get_small(cinfo, SIZEOF(my_memory_mgr)); + + if (mem == NULL) { + jpeg_mem_term(cinfo); /* system-dependent cleanup */ + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 0); + } + + /* OK, fill in the method pointers */ + mem->pub.alloc_small = alloc_small; + mem->pub.alloc_large = alloc_large; + mem->pub.alloc_sarray = alloc_sarray; + mem->pub.alloc_barray = alloc_barray; + mem->pub.request_virt_sarray = request_virt_sarray; + mem->pub.request_virt_barray = request_virt_barray; + mem->pub.realize_virt_arrays = realize_virt_arrays; + mem->pub.access_virt_sarray = access_virt_sarray; + mem->pub.access_virt_barray = access_virt_barray; + mem->pub.free_pool = free_pool; + mem->pub.self_destruct = self_destruct; + + /* Make MAX_ALLOC_CHUNK accessible to other modules */ + mem->pub.max_alloc_chunk = MAX_ALLOC_CHUNK; + + /* Initialize working state */ + mem->pub.max_memory_to_use = max_to_use; + + for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { + mem->small_list[pool] = NULL; + mem->large_list[pool] = NULL; + } + mem->virt_sarray_list = NULL; + mem->virt_barray_list = NULL; + + mem->total_space_allocated = SIZEOF(my_memory_mgr); + + /* Declare ourselves open for business */ + cinfo->mem = & mem->pub; + + /* Check for an environment variable JPEGMEM; if found, override the + * default max_memory setting from jpeg_mem_init. Note that the + * surrounding application may again override this value. + * If your system doesn't support getenv(), define NO_GETENV to disable + * this feature. + */ +#ifndef NO_GETENV + { char * memenv; + + if ((memenv = getenv("JPEGMEM")) != NULL) { + char ch = 'x'; + + if (sscanf(memenv, "%ld%c", &max_to_use, &ch) > 0) { + if (ch == 'm' || ch == 'M') + max_to_use *= 1000L; + mem->pub.max_memory_to_use = max_to_use * 1000L; + } + } + } +#endif + +} diff --git a/src/SDL2/external/jpeg-9/jmemname.c b/src/SDL2/external/jpeg-9/jmemname.c new file mode 100644 index 000000000..ed96dee1b --- /dev/null +++ b/src/SDL2/external/jpeg-9/jmemname.c @@ -0,0 +1,276 @@ +/* + * jmemname.c + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides a generic implementation of the system-dependent + * portion of the JPEG memory manager. This implementation assumes that + * you must explicitly construct a name for each temp file. + * Also, the problem of determining the amount of memory available + * is shoved onto the user. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + +#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ +#define SEEK_SET 0 /* if not, assume 0 is correct */ +#endif + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define RW_BINARY "w+" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define RW_BINARY "w+b", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define RW_BINARY "w+b" +#endif +#endif + + +/* + * Selection of a file name for a temporary file. + * This is system-dependent! + * + * The code as given is suitable for most Unix systems, and it is easily + * modified for most non-Unix systems. Some notes: + * 1. The temp file is created in the directory named by TEMP_DIRECTORY. + * The default value is /usr/tmp, which is the conventional place for + * creating large temp files on Unix. On other systems you'll probably + * want to change the file location. You can do this by editing the + * #define, or (preferred) by defining TEMP_DIRECTORY in jconfig.h. + * + * 2. If you need to change the file name as well as its location, + * you can override the TEMP_FILE_NAME macro. (Note that this is + * actually a printf format string; it must contain %s and %d.) + * Few people should need to do this. + * + * 3. mktemp() is used to ensure that multiple processes running + * simultaneously won't select the same file names. If your system + * doesn't have mktemp(), define NO_MKTEMP to do it the hard way. + * (If you don't have , also define NO_ERRNO_H.) + * + * 4. You probably want to define NEED_SIGNAL_CATCHER so that cjpeg.c/djpeg.c + * will cause the temp files to be removed if you stop the program early. + */ + +#ifndef TEMP_DIRECTORY /* can override from jconfig.h or Makefile */ +#define TEMP_DIRECTORY "/usr/tmp/" /* recommended setting for Unix */ +#endif + +static int next_file_num; /* to distinguish among several temp files */ + +#ifdef NO_MKTEMP + +#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ +#define TEMP_FILE_NAME "%sJPG%03d.TMP" +#endif + +#ifndef NO_ERRNO_H +#include /* to define ENOENT */ +#endif + +/* ANSI C specifies that errno is a macro, but on older systems it's more + * likely to be a plain int variable. And not all versions of errno.h + * bother to declare it, so we have to in order to be most portable. Thus: + */ +#ifndef errno +extern int errno; +#endif + + +LOCAL(void) +select_file_name (char * fname) +{ + FILE * tfile; + + /* Keep generating file names till we find one that's not in use */ + for (;;) { + next_file_num++; /* advance counter */ + sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); + if ((tfile = fopen(fname, READ_BINARY)) == NULL) { + /* fopen could have failed for a reason other than the file not + * being there; for example, file there but unreadable. + * If isn't available, then we cannot test the cause. + */ +#ifdef ENOENT + if (errno != ENOENT) + continue; +#endif + break; + } + fclose(tfile); /* oops, it's there; close tfile & try again */ + } +} + +#else /* ! NO_MKTEMP */ + +/* Note that mktemp() requires the initial filename to end in six X's */ +#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ +#define TEMP_FILE_NAME "%sJPG%dXXXXXX" +#endif + +LOCAL(void) +select_file_name (char * fname) +{ + next_file_num++; /* advance counter */ + sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); + mktemp(fname); /* make sure file name is unique */ + /* mktemp replaces the trailing XXXXXX with a unique string of characters */ +} + +#endif /* NO_MKTEMP */ + + +/* + * Memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * It's impossible to do this in a portable way; our current solution is + * to make the user tell us (with a default value set at compile time). + * If you can actually get the available space, it's a good idea to subtract + * a slop factor of 5% or so. + */ + +#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ +#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ +#endif + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return cinfo->mem->max_memory_to_use - already_allocated; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + + +METHODDEF(void) +read_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFREAD(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFWRITE(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_backing_store (j_common_ptr cinfo, backing_store_ptr info) +{ + fclose(info->temp_file); /* close the file */ + unlink(info->temp_name); /* delete the file */ +/* If your system doesn't have unlink(), use remove() instead. + * remove() is the ANSI-standard name for this function, but if + * your system was ANSI you'd be using jmemansi.c, right? + */ + TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); +} + + +/* + * Initial opening of a backing-store object. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + select_file_name(info->temp_name); + if ((info->temp_file = fopen(info->temp_name, RW_BINARY)) == NULL) + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + info->read_backing_store = read_backing_store; + info->write_backing_store = write_backing_store; + info->close_backing_store = close_backing_store; + TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + next_file_num = 0; /* initialize temp file name generator */ + return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/src/SDL2/external/jpeg-9/jmemnobs.c b/src/SDL2/external/jpeg-9/jmemnobs.c new file mode 100644 index 000000000..eb8c33772 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jmemnobs.c @@ -0,0 +1,109 @@ +/* + * jmemnobs.c + * + * Copyright (C) 1992-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides a really simple implementation of the system- + * dependent portion of the JPEG memory manager. This implementation + * assumes that no backing-store files are needed: all required space + * can be obtained from malloc(). + * This is very portable in the sense that it'll compile on almost anything, + * but you'd better have lots of main memory (or virtual memory) if you want + * to process big images. + * Note that the max_memory_to_use option is ignored by this implementation. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + + +/* + * Memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * Here we always say, "we got all you want bud!" + */ + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return max_bytes_needed; +} + + +/* + * Backing store (temporary file) management. + * Since jpeg_mem_available always promised the moon, + * this should never be called and we can just error out. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + ERREXIT(cinfo, JERR_NO_BACKING_STORE); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. Here, there isn't any. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + return 0; /* just set max_memory_to_use to 0 */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/src/SDL2/external/jpeg-9/jmemsys.h b/src/SDL2/external/jpeg-9/jmemsys.h new file mode 100644 index 000000000..6c3c6d348 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jmemsys.h @@ -0,0 +1,198 @@ +/* + * jmemsys.h + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This include file defines the interface between the system-independent + * and system-dependent portions of the JPEG memory manager. No other + * modules need include it. (The system-independent portion is jmemmgr.c; + * there are several different versions of the system-dependent portion.) + * + * This file works as-is for the system-dependent memory managers supplied + * in the IJG distribution. You may need to modify it if you write a + * custom memory manager. If system-dependent changes are needed in + * this file, the best method is to #ifdef them based on a configuration + * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR + * and USE_MAC_MEMMGR. + */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_get_small jGetSmall +#define jpeg_free_small jFreeSmall +#define jpeg_get_large jGetLarge +#define jpeg_free_large jFreeLarge +#define jpeg_mem_available jMemAvail +#define jpeg_open_backing_store jOpenBackStore +#define jpeg_mem_init jMemInit +#define jpeg_mem_term jMemTerm +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * These two functions are used to allocate and release small chunks of + * memory. (Typically the total amount requested through jpeg_get_small is + * no more than 20K or so; this will be requested in chunks of a few K each.) + * Behavior should be the same as for the standard library functions malloc + * and free; in particular, jpeg_get_small must return NULL on failure. + * On most systems, these ARE malloc and free. jpeg_free_small is passed the + * size of the object being freed, just in case it's needed. + * On an 80x86 machine using small-data memory model, these manage near heap. + */ + +EXTERN(void *) jpeg_get_small JPP((j_common_ptr cinfo, size_t sizeofobject)); +EXTERN(void) jpeg_free_small JPP((j_common_ptr cinfo, void * object, + size_t sizeofobject)); + +/* + * These two functions are used to allocate and release large chunks of + * memory (up to the total free space designated by jpeg_mem_available). + * The interface is the same as above, except that on an 80x86 machine, + * far pointers are used. On most other machines these are identical to + * the jpeg_get/free_small routines; but we keep them separate anyway, + * in case a different allocation strategy is desirable for large chunks. + */ + +EXTERN(void FAR *) jpeg_get_large JPP((j_common_ptr cinfo, + size_t sizeofobject)); +EXTERN(void) jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object, + size_t sizeofobject)); + +/* + * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may + * be requested in a single call to jpeg_get_large (and jpeg_get_small for that + * matter, but that case should never come into play). This macro is needed + * to model the 64Kb-segment-size limit of far addressing on 80x86 machines. + * On those machines, we expect that jconfig.h will provide a proper value. + * On machines with 32-bit flat address spaces, any large constant may be used. + * + * NB: jmemmgr.c expects that MAX_ALLOC_CHUNK will be representable as type + * size_t and will be a multiple of sizeof(align_type). + */ + +#ifndef MAX_ALLOC_CHUNK /* may be overridden in jconfig.h */ +#define MAX_ALLOC_CHUNK 1000000000L +#endif + +/* + * This routine computes the total space still available for allocation by + * jpeg_get_large. If more space than this is needed, backing store will be + * used. NOTE: any memory already allocated must not be counted. + * + * There is a minimum space requirement, corresponding to the minimum + * feasible buffer sizes; jmemmgr.c will request that much space even if + * jpeg_mem_available returns zero. The maximum space needed, enough to hold + * all working storage in memory, is also passed in case it is useful. + * Finally, the total space already allocated is passed. If no better + * method is available, cinfo->mem->max_memory_to_use - already_allocated + * is often a suitable calculation. + * + * It is OK for jpeg_mem_available to underestimate the space available + * (that'll just lead to more backing-store access than is really necessary). + * However, an overestimate will lead to failure. Hence it's wise to subtract + * a slop factor from the true available space. 5% should be enough. + * + * On machines with lots of virtual memory, any large constant may be returned. + * Conversely, zero may be returned to always use the minimum amount of memory. + */ + +EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo, + long min_bytes_needed, + long max_bytes_needed, + long already_allocated)); + + +/* + * This structure holds whatever state is needed to access a single + * backing-store object. The read/write/close method pointers are called + * by jmemmgr.c to manipulate the backing-store object; all other fields + * are private to the system-dependent backing store routines. + */ + +#define TEMP_NAME_LENGTH 64 /* max length of a temporary file's name */ + + +#ifdef USE_MSDOS_MEMMGR /* DOS-specific junk */ + +typedef unsigned short XMSH; /* type of extended-memory handles */ +typedef unsigned short EMSH; /* type of expanded-memory handles */ + +typedef union { + short file_handle; /* DOS file handle if it's a temp file */ + XMSH xms_handle; /* handle if it's a chunk of XMS */ + EMSH ems_handle; /* handle if it's a chunk of EMS */ +} handle_union; + +#endif /* USE_MSDOS_MEMMGR */ + +#ifdef USE_MAC_MEMMGR /* Mac-specific junk */ +#include +#endif /* USE_MAC_MEMMGR */ + + +typedef struct backing_store_struct * backing_store_ptr; + +typedef struct backing_store_struct { + /* Methods for reading/writing/closing this backing-store object */ + JMETHOD(void, read_backing_store, (j_common_ptr cinfo, + backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count)); + JMETHOD(void, write_backing_store, (j_common_ptr cinfo, + backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count)); + JMETHOD(void, close_backing_store, (j_common_ptr cinfo, + backing_store_ptr info)); + + /* Private fields for system-dependent backing-store management */ +#ifdef USE_MSDOS_MEMMGR + /* For the MS-DOS manager (jmemdos.c), we need: */ + handle_union handle; /* reference to backing-store storage object */ + char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ +#else +#ifdef USE_MAC_MEMMGR + /* For the Mac manager (jmemmac.c), we need: */ + short temp_file; /* file reference number to temp file */ + FSSpec tempSpec; /* the FSSpec for the temp file */ + char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ +#else + /* For a typical implementation with temp files, we need: */ + FILE * temp_file; /* stdio reference to temp file */ + char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */ +#endif +#endif +} backing_store_info; + + +/* + * Initial opening of a backing-store object. This must fill in the + * read/write/close pointers in the object. The read/write routines + * may take an error exit if the specified maximum file size is exceeded. + * (If jpeg_mem_available always returns a large value, this routine can + * just take an error exit.) + */ + +EXTERN(void) jpeg_open_backing_store JPP((j_common_ptr cinfo, + backing_store_ptr info, + long total_bytes_needed)); + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. jpeg_mem_init will be called before anything is + * allocated (and, therefore, nothing in cinfo is of use except the error + * manager pointer). It should return a suitable default value for + * max_memory_to_use; this may subsequently be overridden by the surrounding + * application. (Note that max_memory_to_use is only important if + * jpeg_mem_available chooses to consult it ... no one else will.) + * jpeg_mem_term may assume that all requested memory has been freed and that + * all opened backing-store objects have been closed. + */ + +EXTERN(long) jpeg_mem_init JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_mem_term JPP((j_common_ptr cinfo)); diff --git a/src/SDL2/external/jpeg-9/jmorecfg.h b/src/SDL2/external/jpeg-9/jmorecfg.h new file mode 100644 index 000000000..2407edbef --- /dev/null +++ b/src/SDL2/external/jpeg-9/jmorecfg.h @@ -0,0 +1,390 @@ +/* + * jmorecfg.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 1997-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains additional configuration options that customize the + * JPEG software for special applications or support machine-dependent + * optimizations. Most users will not need to touch this file. + */ + + +/* + * Define BITS_IN_JSAMPLE as either + * 8 for 8-bit sample values (the usual setting) + * 12 for 12-bit sample values + * Only 8 and 12 are legal data precisions for lossy JPEG according to the + * JPEG standard, and the IJG code does not support anything else! + * We do not support run-time selection of data precision, sorry. + */ + +#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */ + + +/* + * Maximum number of components (color channels) allowed in JPEG image. + * To meet the letter of the JPEG spec, set this to 255. However, darn + * few applications need more than 4 channels (maybe 5 for CMYK + alpha + * mask). We recommend 10 as a reasonable compromise; use 4 if you are + * really short on memory. (Each allowed component costs a hundred or so + * bytes of storage, whether actually used in an image or not.) + */ + +#define MAX_COMPONENTS 10 /* maximum number of image components */ + + +/* + * Basic data types. + * You may need to change these if you have a machine with unusual data + * type sizes; for example, "char" not 8 bits, "short" not 16 bits, + * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits, + * but it had better be at least 16. + */ + +/* Representation of a single sample (pixel element value). + * We frequently allocate large arrays of these, so it's important to keep + * them small. But if you have memory to burn and access to char or short + * arrays is very slow on your hardware, you might want to change these. + */ + +#if BITS_IN_JSAMPLE == 8 +/* JSAMPLE should be the smallest type that will hold the values 0..255. + * You can use a signed char by having GETJSAMPLE mask it with 0xFF. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JSAMPLE; +#ifdef CHAR_IS_UNSIGNED +#define GETJSAMPLE(value) ((int) (value)) +#else +#define GETJSAMPLE(value) ((int) (value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + +#define MAXJSAMPLE 255 +#define CENTERJSAMPLE 128 + +#endif /* BITS_IN_JSAMPLE == 8 */ + + +#if BITS_IN_JSAMPLE == 12 +/* JSAMPLE should be the smallest type that will hold the values 0..4095. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 4095 +#define CENTERJSAMPLE 2048 + +#endif /* BITS_IN_JSAMPLE == 12 */ + + +/* Representation of a DCT frequency coefficient. + * This should be a signed value of at least 16 bits; "short" is usually OK. + * Again, we allocate large arrays of these, but you can change to int + * if you have memory to burn and "short" is really slow. + */ + +typedef short JCOEF; + + +/* Compressed datastreams are represented as arrays of JOCTET. + * These must be EXACTLY 8 bits wide, at least once they are written to + * external storage. Note that when using the stdio data source/destination + * managers, this is also the data type passed to fread/fwrite. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JOCTET; +#define GETJOCTET(value) (value) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JOCTET; +#ifdef CHAR_IS_UNSIGNED +#define GETJOCTET(value) (value) +#else +#define GETJOCTET(value) ((value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + + +/* These typedefs are used for various table entries and so forth. + * They must be at least as wide as specified; but making them too big + * won't cost a huge amount of memory, so we don't provide special + * extraction code like we did for JSAMPLE. (In other words, these + * typedefs live at a different point on the speed/space tradeoff curve.) + */ + +/* UINT8 must hold at least the values 0..255. */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char UINT8; +#else /* not HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char UINT8; +#else /* not CHAR_IS_UNSIGNED */ +typedef short UINT8; +#endif /* CHAR_IS_UNSIGNED */ +#endif /* HAVE_UNSIGNED_CHAR */ + +/* UINT16 must hold at least the values 0..65535. */ + +#ifdef HAVE_UNSIGNED_SHORT +typedef unsigned short UINT16; +#else /* not HAVE_UNSIGNED_SHORT */ +typedef unsigned int UINT16; +#endif /* HAVE_UNSIGNED_SHORT */ + +/* INT16 must hold at least the values -32768..32767. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */ +typedef short INT16; +#endif + +/* INT32 must hold at least signed 32-bit values. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */ +#ifndef _BASETSD_H_ /* Microsoft defines it in basetsd.h */ +#ifndef _BASETSD_H /* MinGW is slightly different */ +#ifndef QGLOBAL_H /* Qt defines it in qglobal.h */ +typedef long INT32; +#endif +#endif +#endif +#endif + +/* Datatype used for image dimensions. The JPEG standard only supports + * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore + * "unsigned int" is sufficient on all machines. However, if you need to + * handle larger images and you don't mind deviating from the spec, you + * can change this datatype. + */ + +typedef unsigned int JDIMENSION; + +#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */ + + +/* These macros are used in all function definitions and extern declarations. + * You could modify them if you need to change function linkage conventions; + * in particular, you'll need to do that to make the library a Windows DLL. + * Another application is to make all functions global for use with debuggers + * or code profilers that require it. + */ + +/* a function called through method pointers: */ +#define METHODDEF(type) static type +/* a function used only in its module: */ +#define LOCAL(type) static type +/* a function referenced thru EXTERNs: */ +#define GLOBAL(type) type +/* a reference to a GLOBAL function: */ +#define EXTERN(type) extern type + + +/* This macro is used to declare a "method", that is, a function pointer. + * We want to supply prototype parameters if the compiler can cope. + * Note that the arglist parameter must be parenthesized! + * Again, you can customize this if you need special linkage keywords. + */ + +#ifdef HAVE_PROTOTYPES +#define JMETHOD(type,methodname,arglist) type (*methodname) arglist +#else +#define JMETHOD(type,methodname,arglist) type (*methodname) () +#endif + + +/* The noreturn type identifier is used to declare functions + * which cannot return. + * Compilers can thus create more optimized code and perform + * better checks for warnings and errors. + * Static analyzer tools can make improved inferences about + * execution paths and are prevented from giving false alerts. + * + * Unfortunately, the proposed specifications of corresponding + * extensions in the Dec 2011 ISO C standard revision (C11), + * GCC, MSVC, etc. are not viable. + * Thus we introduce a user defined type to declare noreturn + * functions at least for clarity. A proper compiler would + * have a suitable noreturn type to match in place of void. + */ + +#ifndef HAVE_NORETURN_T +typedef void noreturn_t; +#endif + + +/* Here is the pseudo-keyword for declaring pointers that must be "far" + * on 80x86 machines. Most of the specialized coding for 80x86 is handled + * by just saying "FAR *" where such a pointer is needed. In a few places + * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. + */ + +#ifndef FAR +#ifdef NEED_FAR_POINTERS +#define FAR far +#else +#define FAR +#endif +#endif + + +/* + * On a few systems, type boolean and/or its values FALSE, TRUE may appear + * in standard header files. Or you may have conflicts with application- + * specific header files that you want to include together with these files. + * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. + */ + +#ifdef HAVE_BOOLEAN +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif +#else +typedef enum { FALSE = 0, TRUE = 1 } boolean; +#endif + + +/* + * The remaining options affect code selection within the JPEG library, + * but they don't need to be visible to most applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined. + */ + +#ifdef JPEG_INTERNALS +#define JPEG_INTERNAL_OPTIONS +#endif + +#ifdef JPEG_INTERNAL_OPTIONS + + +/* + * These defines indicate whether to include various optional functions. + * Undefining some of these symbols will produce a smaller but less capable + * library. Note that you can leave certain source files out of the + * compilation/linking process if you've #undef'd the corresponding symbols. + * (You may HAVE to do that if your compiler doesn't like null source files.) + */ + +/* Capability options common to encoder and decoder: */ + +#define DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ +#define DCT_IFAST_SUPPORTED /* faster, less accurate integer method */ +#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */ + +/* Encoder capability options: */ + +#define C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define DCT_SCALING_SUPPORTED /* Input rescaling via DCT? (Requires DCT_ISLOW)*/ +#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ +/* Note: if you selected 12-bit data precision, it is dangerous to turn off + * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit + * precision, so jchuff.c normally uses entropy optimization to compute + * usable tables for higher precision. If you don't want to do optimization, + * you'll have to supply different default Huffman tables. + * The exact same statements apply for progressive JPEG: the default tables + * don't work for progressive mode. (This may get fixed, however.) + */ +#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */ + +/* Decoder capability options: */ + +#define D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */ +#define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */ +#define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ +#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ +#define UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ +#define QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ +#define QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */ + +/* more capability options later, no doubt */ + + +/* + * Ordering of RGB data in scanlines passed to or from the application. + * If your application wants to deal with data in the order B,G,R, just + * change these macros. You can also deal with formats such as R,G,B,X + * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing + * the offsets will also change the order in which colormap data is organized. + * RESTRICTIONS: + * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. + * 2. The color quantizer modules will not behave desirably if RGB_PIXELSIZE + * is not 3 (they don't understand about dummy color components!). So you + * can't use color quantization if you change that value. + */ + +#define RGB_RED 0 /* Offset of Red in an RGB scanline element */ +#define RGB_GREEN 1 /* Offset of Green */ +#define RGB_BLUE 2 /* Offset of Blue */ +#define RGB_PIXELSIZE 3 /* JSAMPLEs per RGB scanline element */ + + +/* Definitions for speed-related optimizations. */ + + +/* If your compiler supports inline functions, define INLINE + * as the inline keyword; otherwise define it as empty. + */ + +#ifndef INLINE +#ifdef __GNUC__ /* for instance, GNU C knows about inline */ +#define INLINE __inline__ +#endif +#ifndef INLINE +#define INLINE /* default is to define it as empty */ +#endif +#endif + + +/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying + * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER + * as short on such a machine. MULTIPLIER must be at least 16 bits wide. + */ + +#ifndef MULTIPLIER +#define MULTIPLIER int /* type for fastest integer multiply */ +#endif + + +/* FAST_FLOAT should be either float or double, whichever is done faster + * by your compiler. (Note that this type is only used in the floating point + * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.) + * Typically, float is faster in ANSI C compilers, while double is faster in + * pre-ANSI compilers (because they insist on converting to double anyway). + * The code below therefore chooses float if we have ANSI-style prototypes. + */ + +#ifndef FAST_FLOAT +#ifdef HAVE_PROTOTYPES +#define FAST_FLOAT float +#else +#define FAST_FLOAT double +#endif +#endif + +#endif /* JPEG_INTERNAL_OPTIONS */ diff --git a/src/SDL2/external/jpeg-9/jpegint.h b/src/SDL2/external/jpeg-9/jpegint.h new file mode 100644 index 000000000..c0d5c1420 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jpegint.h @@ -0,0 +1,426 @@ +/* + * jpegint.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 1997-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides common declarations for the various JPEG modules. + * These declarations are considered internal to the JPEG library; most + * applications using the library shouldn't need to include this file. + */ + + +/* Declarations for both compression & decompression */ + +typedef enum { /* Operating modes for buffer controllers */ + JBUF_PASS_THRU, /* Plain stripwise operation */ + /* Remaining modes require a full-image buffer to have been created */ + JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ + JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ + JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ +} J_BUF_MODE; + +/* Values of global_state field (jdapi.c has some dependencies on ordering!) */ +#define CSTATE_START 100 /* after create_compress */ +#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ +#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ +#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ +#define DSTATE_START 200 /* after create_decompress */ +#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */ +#define DSTATE_READY 202 /* found SOS, ready for start_decompress */ +#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ +#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ +#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ +#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ +#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ +#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ +#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ +#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ + + +/* Declarations for compression modules */ + +/* Master control module */ +struct jpeg_comp_master { + JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); + JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean call_pass_startup; /* True if pass_startup must be called */ + boolean is_last_pass; /* True during last pass */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_c_main_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail)); +}; + +/* Compression preprocessing (downsampling input buffer control) */ +struct jpeg_c_prep_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, + JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_c_coef_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf)); +}; + +/* Colorspace conversion */ +struct jpeg_color_converter { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, color_convert, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows)); +}; + +/* Downsampling */ +struct jpeg_downsampler { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, downsample, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_index, + JSAMPIMAGE output_buf, + JDIMENSION out_row_group_index)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Forward DCT (also controls coefficient quantization) */ +typedef JMETHOD(void, forward_DCT_ptr, + (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks)); + +struct jpeg_forward_dct { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + /* It is useful to allow each component to have a separate FDCT method. */ + forward_DCT_ptr forward_DCT[MAX_COMPONENTS]; +}; + +/* Entropy encoding */ +struct jpeg_entropy_encoder { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); + JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); +}; + +/* Marker writing */ +struct jpeg_marker_writer { + JMETHOD(void, write_file_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_frame_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_scan_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); + JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); + /* These routines are exported to allow insertion of extra markers */ + /* Probably only COM and APPn markers should be written this way */ + JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker, + unsigned int datalen)); + JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val)); +}; + + +/* Declarations for decompression modules */ + +/* Master control module */ +struct jpeg_decomp_master { + JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ +}; + +/* Input control module */ +struct jpeg_input_controller { + JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); + JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean has_multiple_scans; /* True if file has multiple scans */ + boolean eoi_reached; /* True when EOI has been consumed */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_d_main_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_d_coef_controller { + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); + JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, + JSAMPIMAGE output_buf)); + /* Pointer to array of coefficient virtual arrays, or NULL if none */ + jvirt_barray_ptr *coef_arrays; +}; + +/* Decompression postprocessing (color quantization buffer control) */ +struct jpeg_d_post_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Marker reading & parsing */ +struct jpeg_marker_reader { + JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); + /* Read markers until SOS or EOI. + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + */ + JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); + /* Read a restart marker --- exported for use by entropy decoder only */ + jpeg_marker_parser_method read_restart_marker; + + /* State of marker reader --- nominally internal, but applications + * supplying COM or APPn handlers might like to know the state. + */ + boolean saw_SOI; /* found SOI? */ + boolean saw_SOF; /* found SOF? */ + int next_restart_num; /* next restart number expected (0-7) */ + unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ +}; + +/* Entropy decoding */ +struct jpeg_entropy_decoder { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, + JBLOCKROW *MCU_data)); +}; + +/* Inverse DCT (also performs dequantization) */ +typedef JMETHOD(void, inverse_DCT_method_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col)); + +struct jpeg_inverse_dct { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + /* It is useful to allow each component to have a separate IDCT method. */ + inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; +}; + +/* Upsampling (note that upsampler must also call color converter) */ +struct jpeg_upsampler { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, upsample, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Colorspace conversion */ +struct jpeg_color_deconverter { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, color_convert, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows)); +}; + +/* Color quantization or color precision reduction */ +struct jpeg_color_quantizer { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); + JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, + int num_rows)); + JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); +}; + + +/* Miscellaneous useful macros */ + +#undef MAX +#define MAX(a,b) ((a) > (b) ? (a) : (b)) +#undef MIN +#define MIN(a,b) ((a) < (b) ? (a) : (b)) + + +/* We assume that right shift corresponds to signed division by 2 with + * rounding towards minus infinity. This is correct for typical "arithmetic + * shift" instructions that shift in copies of the sign bit. But some + * C compilers implement >> with an unsigned shift. For these machines you + * must define RIGHT_SHIFT_IS_UNSIGNED. + * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity. + * It is only applied with constant shift counts. SHIFT_TEMPS must be + * included in the variables of any routine using RIGHT_SHIFT. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define SHIFT_TEMPS INT32 shift_temp; +#define RIGHT_SHIFT(x,shft) \ + ((shift_temp = (x)) < 0 ? \ + (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ + (shift_temp >> (shft))) +#else +#define SHIFT_TEMPS +#define RIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_compress_master jICompress +#define jinit_c_master_control jICMaster +#define jinit_c_main_controller jICMainC +#define jinit_c_prep_controller jICPrepC +#define jinit_c_coef_controller jICCoefC +#define jinit_color_converter jICColor +#define jinit_downsampler jIDownsampler +#define jinit_forward_dct jIFDCT +#define jinit_huff_encoder jIHEncoder +#define jinit_arith_encoder jIAEncoder +#define jinit_marker_writer jIMWriter +#define jinit_master_decompress jIDMaster +#define jinit_d_main_controller jIDMainC +#define jinit_d_coef_controller jIDCoefC +#define jinit_d_post_controller jIDPostC +#define jinit_input_controller jIInCtlr +#define jinit_marker_reader jIMReader +#define jinit_huff_decoder jIHDecoder +#define jinit_arith_decoder jIADecoder +#define jinit_inverse_dct jIIDCT +#define jinit_upsampler jIUpsampler +#define jinit_color_deconverter jIDColor +#define jinit_1pass_quantizer jI1Quant +#define jinit_2pass_quantizer jI2Quant +#define jinit_merged_upsampler jIMUpsampler +#define jinit_memory_mgr jIMemMgr +#define jdiv_round_up jDivRound +#define jround_up jRound +#define jzero_far jZeroFar +#define jcopy_sample_rows jCopySamples +#define jcopy_block_row jCopyBlocks +#define jpeg_zigzag_order jZIGTable +#define jpeg_natural_order jZAGTable +#define jpeg_natural_order7 jZAG7Table +#define jpeg_natural_order6 jZAG6Table +#define jpeg_natural_order5 jZAG5Table +#define jpeg_natural_order4 jZAG4Table +#define jpeg_natural_order3 jZAG3Table +#define jpeg_natural_order2 jZAG2Table +#define jpeg_aritab jAriTab +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays + * and coefficient-block arrays. This won't work on 80x86 because the arrays + * are FAR and we're assuming a small-pointer memory model. However, some + * DOS compilers provide far-pointer versions of memcpy() and memset() even + * in the small-model libraries. These will be used if USE_FMEM is defined. + * Otherwise, the routines in jutils.c do it the hard way. + */ + +#ifndef NEED_FAR_POINTERS /* normal case, same as regular macro */ +#define FMEMZERO(target,size) MEMZERO(target,size) +#else /* 80x86 case */ +#ifdef USE_FMEM +#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) +#else +EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero)); +#define FMEMZERO(target,size) jzero_far(target, size) +#endif +#endif + + +/* Compression module initialization routines */ +EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo, + boolean transcode_only)); +EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo)); +/* Decompression module initialization routines */ +EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); +/* Memory manager initialization */ +EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo)); + +/* Utility routines in jutils.c */ +EXTERN(long) jdiv_round_up JPP((long a, long b)); +EXTERN(long) jround_up JPP((long a, long b)); +EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols)); +EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks)); +/* Constant tables in jutils.c */ +#if 0 /* This table is not actually needed in v6a */ +extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ +#endif +extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ +extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */ +extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */ +extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */ +extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */ +extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */ +extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */ + +/* Arithmetic coding probability estimation tables in jaricom.c */ +extern const INT32 jpeg_aritab[]; + +/* Suppress undefined-structure complaints if necessary. */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +#endif +#endif /* INCOMPLETE_TYPES_BROKEN */ diff --git a/src/SDL2/external/jpeg-9/jpeglib.h b/src/SDL2/external/jpeg-9/jpeglib.h new file mode 100644 index 000000000..0a6dac44c --- /dev/null +++ b/src/SDL2/external/jpeg-9/jpeglib.h @@ -0,0 +1,1173 @@ +/* + * jpeglib.h + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2002-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the application interface for the JPEG library. + * Most applications using the library need only include this file, + * and perhaps jerror.h if they want to know the exact error codes. + */ + +#ifndef JPEGLIB_H +#define JPEGLIB_H + +/* + * First we include the configuration files that record how this + * installation of the JPEG library is set up. jconfig.h can be + * generated automatically for many systems. jmorecfg.h contains + * manual configuration options that most people need not worry about. + */ + +#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ +#include "jconfig.h" /* widely used configuration options */ +#endif +#include "jmorecfg.h" /* seldom changed options */ + + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +extern "C" { +#endif +#endif + +/* Version IDs for the JPEG library. + * Might be useful for tests like "#if JPEG_LIB_VERSION >= 90". + */ + +#define JPEG_LIB_VERSION 90 /* Compatibility version 9.0 */ +#define JPEG_LIB_VERSION_MAJOR 9 +#define JPEG_LIB_VERSION_MINOR 0 + + +/* Various constants determining the sizes of things. + * All of these are specified by the JPEG standard, so don't change them + * if you want to be compatible. + */ + +#define DCTSIZE 8 /* The basic DCT block is 8x8 coefficients */ +#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ +#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ +#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ +#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ +#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ +#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ +/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; + * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. + * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU + * to handle it. We even let you do this from the jconfig.h file. However, + * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe + * sometimes emits noncompliant files doesn't mean you should too. + */ +#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ +#ifndef D_MAX_BLOCKS_IN_MCU +#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ +#endif + + +/* Data structures for images (arrays of samples and of DCT coefficients). + * On 80x86 machines, the image arrays are too big for near pointers, + * but the pointer arrays can fit in near memory. + */ + +typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ +typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ +typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ + +typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ +typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ +typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ +typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ + +typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ + + +/* Types for JPEG compression parameters and working tables. */ + + +/* DCT coefficient quantization tables. */ + +typedef struct { + /* This array gives the coefficient quantizers in natural array order + * (not the zigzag order in which they are stored in a JPEG DQT marker). + * CAUTION: IJG versions prior to v6a kept this array in zigzag order. + */ + UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JQUANT_TBL; + + +/* Huffman coding tables. */ + +typedef struct { + /* These two fields directly represent the contents of a JPEG DHT marker */ + UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ + /* length k bits; bits[0] is unused */ + UINT8 huffval[256]; /* The symbols, in order of incr code length */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JHUFF_TBL; + + +/* Basic info about one component (color channel). */ + +typedef struct { + /* These values are fixed over the whole image. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOF marker. */ + int component_id; /* identifier for this component (0..255) */ + int component_index; /* its index in SOF or cinfo->comp_info[] */ + int h_samp_factor; /* horizontal sampling factor (1..4) */ + int v_samp_factor; /* vertical sampling factor (1..4) */ + int quant_tbl_no; /* quantization table selector (0..3) */ + /* These values may vary between scans. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOS marker. */ + /* The decompressor output side may not use these variables. */ + int dc_tbl_no; /* DC entropy table selector (0..3) */ + int ac_tbl_no; /* AC entropy table selector (0..3) */ + + /* Remaining fields should be treated as private by applications. */ + + /* These values are computed during compression or decompression startup: */ + /* Component's size in DCT blocks. + * Any dummy blocks added to complete an MCU are not counted; therefore + * these values do not depend on whether a scan is interleaved or not. + */ + JDIMENSION width_in_blocks; + JDIMENSION height_in_blocks; + /* Size of a DCT block in samples, + * reflecting any scaling we choose to apply during the DCT step. + * Values from 1 to 16 are supported. + * Note that different components may receive different DCT scalings. + */ + int DCT_h_scaled_size; + int DCT_v_scaled_size; + /* The downsampled dimensions are the component's actual, unpadded number + * of samples at the main buffer (preprocessing/compression interface); + * DCT scaling is included, so + * downsampled_width = ceil(image_width * Hi/Hmax * DCT_h_scaled_size/DCTSIZE) + * and similarly for height. + */ + JDIMENSION downsampled_width; /* actual width in samples */ + JDIMENSION downsampled_height; /* actual height in samples */ + /* This flag is used only for decompression. In cases where some of the + * components will be ignored (eg grayscale output from YCbCr image), + * we can skip most computations for the unused components. + */ + boolean component_needed; /* do we need the value of this component? */ + + /* These values are computed before starting a scan of the component. */ + /* The decompressor output side may not use these variables. */ + int MCU_width; /* number of blocks per MCU, horizontally */ + int MCU_height; /* number of blocks per MCU, vertically */ + int MCU_blocks; /* MCU_width * MCU_height */ + int MCU_sample_width; /* MCU width in samples: MCU_width * DCT_h_scaled_size */ + int last_col_width; /* # of non-dummy blocks across in last MCU */ + int last_row_height; /* # of non-dummy blocks down in last MCU */ + + /* Saved quantization table for component; NULL if none yet saved. + * See jdinput.c comments about the need for this information. + * This field is currently used only for decompression. + */ + JQUANT_TBL * quant_table; + + /* Private per-component storage for DCT or IDCT subsystem. */ + void * dct_table; +} jpeg_component_info; + + +/* The script for encoding a multiple-scan file is an array of these: */ + +typedef struct { + int comps_in_scan; /* number of components encoded in this scan */ + int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ + int Ss, Se; /* progressive JPEG spectral selection parms */ + int Ah, Al; /* progressive JPEG successive approx. parms */ +} jpeg_scan_info; + +/* The decompressor can save APPn and COM markers in a list of these: */ + +typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr; + +struct jpeg_marker_struct { + jpeg_saved_marker_ptr next; /* next in list, or NULL */ + UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */ + unsigned int original_length; /* # bytes of data in the file */ + unsigned int data_length; /* # bytes of data saved at data[] */ + JOCTET FAR * data; /* the data contained in the marker */ + /* the marker length word is not counted in data_length or original_length */ +}; + +/* Known color spaces. */ + +typedef enum { + JCS_UNKNOWN, /* error/unspecified */ + JCS_GRAYSCALE, /* monochrome */ + JCS_RGB, /* red/green/blue */ + JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ + JCS_CMYK, /* C/M/Y/K */ + JCS_YCCK /* Y/Cb/Cr/K */ +} J_COLOR_SPACE; + +/* Supported color transforms. */ + +typedef enum { + JCT_NONE = 0, + JCT_SUBTRACT_GREEN = 1 +} J_COLOR_TRANSFORM; + +/* DCT/IDCT algorithm options. */ + +typedef enum { + JDCT_ISLOW, /* slow but accurate integer algorithm */ + JDCT_IFAST, /* faster, less accurate integer method */ + JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ +} J_DCT_METHOD; + +#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ +#define JDCT_DEFAULT JDCT_ISLOW +#endif +#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ +#define JDCT_FASTEST JDCT_IFAST +#endif + +/* Dithering options for decompression. */ + +typedef enum { + JDITHER_NONE, /* no dithering */ + JDITHER_ORDERED, /* simple ordered dither */ + JDITHER_FS /* Floyd-Steinberg error diffusion dither */ +} J_DITHER_MODE; + + +/* Common fields between JPEG compression and decompression master structs. */ + +#define jpeg_common_fields \ + struct jpeg_error_mgr * err; /* Error handler module */\ + struct jpeg_memory_mgr * mem; /* Memory manager module */\ + struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ + void * client_data; /* Available for use by application */\ + boolean is_decompressor; /* So common code can tell which is which */\ + int global_state /* For checking call sequence validity */ + +/* Routines that are to be used by both halves of the library are declared + * to receive a pointer to this structure. There are no actual instances of + * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. + */ +struct jpeg_common_struct { + jpeg_common_fields; /* Fields common to both master struct types */ + /* Additional fields follow in an actual jpeg_compress_struct or + * jpeg_decompress_struct. All three structs must agree on these + * initial fields! (This would be a lot cleaner in C++.) + */ +}; + +typedef struct jpeg_common_struct * j_common_ptr; +typedef struct jpeg_compress_struct * j_compress_ptr; +typedef struct jpeg_decompress_struct * j_decompress_ptr; + + +/* Master record for a compression instance */ + +struct jpeg_compress_struct { + jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ + + /* Destination for compressed data */ + struct jpeg_destination_mgr * dest; + + /* Description of source image --- these fields must be filled in by + * outer application before starting compression. in_color_space must + * be correct before you can even call jpeg_set_defaults(). + */ + + JDIMENSION image_width; /* input image width */ + JDIMENSION image_height; /* input image height */ + int input_components; /* # of color components in input image */ + J_COLOR_SPACE in_color_space; /* colorspace of input image */ + + double input_gamma; /* image gamma of input image */ + + /* Compression parameters --- these fields must be set before calling + * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to + * initialize everything to reasonable defaults, then changing anything + * the application specifically wants to change. That way you won't get + * burnt when new parameters are added. Also note that there are several + * helper routines to simplify changing parameters. + */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + JDIMENSION jpeg_width; /* scaled JPEG image width */ + JDIMENSION jpeg_height; /* scaled JPEG image height */ + /* Dimensions of actual JPEG image that will be written to file, + * derived from input dimensions by scaling factors above. + * These fields are computed by jpeg_start_compress(). + * You can also use jpeg_calc_jpeg_dimensions() to determine these values + * in advance of calling jpeg_start_compress(). + */ + + int data_precision; /* bits of precision in image data */ + + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + int q_scale_factor[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined, + * and corresponding scale factors (percentage, initialized 100). + */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + int num_scans; /* # of entries in scan_info array */ + const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ + /* The default value of scan_info is NULL, which causes a single-scan + * sequential JPEG file to be emitted. To create a multi-scan file, + * set num_scans and scan_info to point to an array of scan definitions. + */ + + boolean raw_data_in; /* TRUE=caller supplies downsampled data */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */ + int smoothing_factor; /* 1..100, or 0 for no input smoothing */ + J_DCT_METHOD dct_method; /* DCT algorithm selector */ + + /* The restart interval can be specified in absolute MCUs by setting + * restart_interval, or in MCU rows by setting restart_in_rows + * (in which case the correct restart_interval will be figured + * for each scan). + */ + unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ + int restart_in_rows; /* if > 0, MCU rows per restart interval */ + + /* Parameters controlling emission of special markers. */ + + boolean write_JFIF_header; /* should a JFIF marker be written? */ + UINT8 JFIF_major_version; /* What to write for the JFIF version number */ + UINT8 JFIF_minor_version; + /* These three values are not used by the JPEG code, merely copied */ + /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ + /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ + /* ratio is defined by X_density/Y_density even when density_unit=0. */ + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean write_Adobe_marker; /* should an Adobe marker be written? */ + + J_COLOR_TRANSFORM color_transform; + /* Color transform identifier, writes LSE marker if nonzero */ + + /* State variable: index of next scanline to be written to + * jpeg_write_scanlines(). Application may use this to control its + * processing loop, e.g., "while (next_scanline < image_height)". + */ + + JDIMENSION next_scanline; /* 0 .. image_height-1 */ + + /* Remaining fields are known throughout compressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during compression startup + */ + boolean progressive_mode; /* TRUE if scan script uses progressive mode */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ + /* The coefficient controller receives data in units of MCU rows as defined + * for fully interleaved scans (whether the JPEG file is interleaved or not). + * There are v_samp_factor * DCTSIZE sample rows of each component in an + * "iMCU" (interleaved MCU) row. + */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[C_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) */ + + /* + * Links to compression subobjects (methods and private variables of modules) + */ + struct jpeg_comp_master * master; + struct jpeg_c_main_controller * main; + struct jpeg_c_prep_controller * prep; + struct jpeg_c_coef_controller * coef; + struct jpeg_marker_writer * marker; + struct jpeg_color_converter * cconvert; + struct jpeg_downsampler * downsample; + struct jpeg_forward_dct * fdct; + struct jpeg_entropy_encoder * entropy; + jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */ + int script_space_size; +}; + + +/* Master record for a decompression instance */ + +struct jpeg_decompress_struct { + jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ + + /* Source of compressed data */ + struct jpeg_source_mgr * src; + + /* Basic description of image --- filled in by jpeg_read_header(). */ + /* Application may inspect these values to decide how to process image. */ + + JDIMENSION image_width; /* nominal image width (from SOF marker) */ + JDIMENSION image_height; /* nominal image height */ + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + /* Decompression processing parameters --- these fields must be set before + * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes + * them to default values. + */ + + J_COLOR_SPACE out_color_space; /* colorspace for output */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + double output_gamma; /* image gamma wanted in output */ + + boolean buffered_image; /* TRUE=multiple output passes */ + boolean raw_data_out; /* TRUE=downsampled data wanted */ + + J_DCT_METHOD dct_method; /* IDCT algorithm selector */ + boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ + boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ + + boolean quantize_colors; /* TRUE=colormapped output wanted */ + /* the following are ignored if not quantize_colors: */ + J_DITHER_MODE dither_mode; /* type of color dithering to use */ + boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ + int desired_number_of_colors; /* max # colors to use in created colormap */ + /* these are significant only in buffered-image mode: */ + boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ + boolean enable_external_quant;/* enable future use of external colormap */ + boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ + + /* Description of actual output image that will be returned to application. + * These fields are computed by jpeg_start_decompress(). + * You can also use jpeg_calc_output_dimensions() to determine these values + * in advance of calling jpeg_start_decompress(). + */ + + JDIMENSION output_width; /* scaled image width */ + JDIMENSION output_height; /* scaled image height */ + int out_color_components; /* # of color components in out_color_space */ + int output_components; /* # of color components returned */ + /* output_components is 1 (a colormap index) when quantizing colors; + * otherwise it equals out_color_components. + */ + int rec_outbuf_height; /* min recommended height of scanline buffer */ + /* If the buffer passed to jpeg_read_scanlines() is less than this many rows + * high, space and time will be wasted due to unnecessary data copying. + * Usually rec_outbuf_height will be 1 or 2, at most 4. + */ + + /* When quantizing colors, the output colormap is described by these fields. + * The application can supply a colormap by setting colormap non-NULL before + * calling jpeg_start_decompress; otherwise a colormap is created during + * jpeg_start_decompress or jpeg_start_output. + * The map has out_color_components rows and actual_number_of_colors columns. + */ + int actual_number_of_colors; /* number of entries in use */ + JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ + + /* State variables: these variables indicate the progress of decompression. + * The application may examine these but must not modify them. + */ + + /* Row index of next scanline to be read from jpeg_read_scanlines(). + * Application may use this to control its processing loop, e.g., + * "while (output_scanline < output_height)". + */ + JDIMENSION output_scanline; /* 0 .. output_height-1 */ + + /* Current input scan number and number of iMCU rows completed in scan. + * These indicate the progress of the decompressor input side. + */ + int input_scan_number; /* Number of SOS markers seen so far */ + JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ + + /* The "output scan number" is the notional scan being displayed by the + * output side. The decompressor will not allow output scan/row number + * to get ahead of input scan/row, but it can fall arbitrarily far behind. + */ + int output_scan_number; /* Nominal scan number being displayed */ + JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ + + /* Current progression status. coef_bits[c][i] indicates the precision + * with which component c's DCT coefficient i (in zigzag order) is known. + * It is -1 when no data has yet been received, otherwise it is the point + * transform (shift) value for the most recent scan of the coefficient + * (thus, 0 at completion of the progression). + * This pointer is NULL when reading a non-progressive file. + */ + int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ + + /* Internal JPEG parameters --- the application usually need not look at + * these fields. Note that the decompressor output side may not use + * any parameters that can change between scans. + */ + + /* Quantization and Huffman tables are carried forward across input + * datastreams when processing abbreviated JPEG datastreams. + */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + /* These parameters are never carried across datastreams, since they + * are given in SOF/SOS markers or defined to be reset by SOI. + */ + + int data_precision; /* bits of precision in image data */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + boolean is_baseline; /* TRUE if Baseline SOF0 encountered */ + boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ + + /* These fields record data obtained from optional markers recognized by + * the JPEG library. + */ + boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ + /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ + UINT8 JFIF_major_version; /* JFIF version number */ + UINT8 JFIF_minor_version; + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ + UINT8 Adobe_transform; /* Color transform code from Adobe marker */ + + J_COLOR_TRANSFORM color_transform; + /* Color transform identifier derived from LSE marker, otherwise zero */ + + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + + /* Aside from the specific data retained from APPn markers known to the + * library, the uninterpreted contents of any or all APPn and COM markers + * can be saved in a list for examination by the application. + */ + jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */ + + /* Remaining fields are known throughout decompressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during decompression startup + */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ + /* The coefficient controller's input and output progress is measured in + * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows + * in fully interleaved JPEG scans, but are used whether the scan is + * interleaved or not. We define an iMCU row as v_samp_factor DCT block + * rows of each component. Therefore, the IDCT output contains + * v_samp_factor*DCT_v_scaled_size sample rows of a component per iMCU row. + */ + + JSAMPLE * sample_range_limit; /* table for fast range-limiting */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + * Note that the decompressor output side must not use these fields. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[D_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + /* These fields are derived from Se of first SOS marker. + */ + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array for entropy decode */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) for entropy decode */ + + /* This field is shared between entropy decoder and marker parser. + * It is either zero or the code of a JPEG marker that has been + * read from the data source, but has not yet been processed. + */ + int unread_marker; + + /* + * Links to decompression subobjects (methods, private variables of modules) + */ + struct jpeg_decomp_master * master; + struct jpeg_d_main_controller * main; + struct jpeg_d_coef_controller * coef; + struct jpeg_d_post_controller * post; + struct jpeg_input_controller * inputctl; + struct jpeg_marker_reader * marker; + struct jpeg_entropy_decoder * entropy; + struct jpeg_inverse_dct * idct; + struct jpeg_upsampler * upsample; + struct jpeg_color_deconverter * cconvert; + struct jpeg_color_quantizer * cquantize; +}; + + +/* "Object" declarations for JPEG modules that may be supplied or called + * directly by the surrounding application. + * As with all objects in the JPEG library, these structs only define the + * publicly visible methods and state variables of a module. Additional + * private fields may exist after the public ones. + */ + + +/* Error handler object */ + +struct jpeg_error_mgr { + /* Error exit handler: does not return to caller */ + JMETHOD(noreturn_t, error_exit, (j_common_ptr cinfo)); + /* Conditionally emit a trace or warning message */ + JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); + /* Routine that actually outputs a trace or error message */ + JMETHOD(void, output_message, (j_common_ptr cinfo)); + /* Format a message string for the most recent JPEG error or message */ + JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); +#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ + /* Reset error state variables at start of a new image */ + JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); + + /* The message ID code and any parameters are saved here. + * A message can have one string parameter or up to 8 int parameters. + */ + int msg_code; +#define JMSG_STR_PARM_MAX 80 + union { + int i[8]; + char s[JMSG_STR_PARM_MAX]; + } msg_parm; + + /* Standard state variables for error facility */ + + int trace_level; /* max msg_level that will be displayed */ + + /* For recoverable corrupt-data errors, we emit a warning message, + * but keep going unless emit_message chooses to abort. emit_message + * should count warnings in num_warnings. The surrounding application + * can check for bad data by seeing if num_warnings is nonzero at the + * end of processing. + */ + long num_warnings; /* number of corrupt-data warnings */ + + /* These fields point to the table(s) of error message strings. + * An application can change the table pointer to switch to a different + * message list (typically, to change the language in which errors are + * reported). Some applications may wish to add additional error codes + * that will be handled by the JPEG library error mechanism; the second + * table pointer is used for this purpose. + * + * First table includes all errors generated by JPEG library itself. + * Error code 0 is reserved for a "no such error string" message. + */ + const char * const * jpeg_message_table; /* Library errors */ + int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ + /* Second table can be added by application (see cjpeg/djpeg for example). + * It contains strings numbered first_addon_message..last_addon_message. + */ + const char * const * addon_message_table; /* Non-library errors */ + int first_addon_message; /* code for first string in addon table */ + int last_addon_message; /* code for last string in addon table */ +}; + + +/* Progress monitor object */ + +struct jpeg_progress_mgr { + JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); + + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +}; + + +/* Data destination object for compression */ + +struct jpeg_destination_mgr { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + + JMETHOD(void, init_destination, (j_compress_ptr cinfo)); + JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); + JMETHOD(void, term_destination, (j_compress_ptr cinfo)); +}; + + +/* Data source object for decompression */ + +struct jpeg_source_mgr { + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + + JMETHOD(void, init_source, (j_decompress_ptr cinfo)); + JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); + JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); + JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); + JMETHOD(void, term_source, (j_decompress_ptr cinfo)); +}; + + +/* Memory manager object. + * Allocates "small" objects (a few K total), "large" objects (tens of K), + * and "really big" objects (virtual arrays with backing store if needed). + * The memory manager does not allow individual objects to be freed; rather, + * each created object is assigned to a pool, and whole pools can be freed + * at once. This is faster and more convenient than remembering exactly what + * to free, especially where malloc()/free() are not too speedy. + * NB: alloc routines never return NULL. They exit to error_exit if not + * successful. + */ + +#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ +#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ +#define JPOOL_NUMPOOLS 2 + +typedef struct jvirt_sarray_control * jvirt_sarray_ptr; +typedef struct jvirt_barray_control * jvirt_barray_ptr; + + +struct jpeg_memory_mgr { + /* Method pointers */ + JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, + JDIMENSION numrows)); + JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, + JDIMENSION numrows)); + JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION samplesperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION blocksperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); + JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, + jvirt_sarray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, + jvirt_barray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); + JMETHOD(void, self_destruct, (j_common_ptr cinfo)); + + /* Limit on memory allocation for this JPEG object. (Note that this is + * merely advisory, not a guaranteed maximum; it only affects the space + * used for virtual-array buffers.) May be changed by outer application + * after creating the JPEG object. + */ + long max_memory_to_use; + + /* Maximum allocation request accepted by alloc_large. */ + long max_alloc_chunk; +}; + + +/* Routine signature for application-supplied marker processing methods. + * Need not pass marker code since it is stored in cinfo->unread_marker. + */ +typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); + + +/* Declarations for routines called by application. + * The JPP macro hides prototype parameters from compilers that can't cope. + * Note JPP requires double parentheses. + */ + +#ifdef HAVE_PROTOTYPES +#define JPP(arglist) arglist +#else +#define JPP(arglist) () +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. + * We shorten external names to be unique in the first six letters, which + * is good enough for all known systems. + * (If your compiler itself needs names to be unique in less than 15 + * characters, you are out of luck. Get a better compiler.) + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_error jStdError +#define jpeg_CreateCompress jCreaCompress +#define jpeg_CreateDecompress jCreaDecompress +#define jpeg_destroy_compress jDestCompress +#define jpeg_destroy_decompress jDestDecompress +#define jpeg_stdio_dest jStdDest +#define jpeg_stdio_src jStdSrc +#define jpeg_mem_dest jMemDest +#define jpeg_mem_src jMemSrc +#define jpeg_set_defaults jSetDefaults +#define jpeg_set_colorspace jSetColorspace +#define jpeg_default_colorspace jDefColorspace +#define jpeg_set_quality jSetQuality +#define jpeg_set_linear_quality jSetLQuality +#define jpeg_default_qtables jDefQTables +#define jpeg_add_quant_table jAddQuantTable +#define jpeg_quality_scaling jQualityScaling +#define jpeg_simple_progression jSimProgress +#define jpeg_suppress_tables jSuppressTables +#define jpeg_alloc_quant_table jAlcQTable +#define jpeg_alloc_huff_table jAlcHTable +#define jpeg_start_compress jStrtCompress +#define jpeg_write_scanlines jWrtScanlines +#define jpeg_finish_compress jFinCompress +#define jpeg_calc_jpeg_dimensions jCjpegDimensions +#define jpeg_write_raw_data jWrtRawData +#define jpeg_write_marker jWrtMarker +#define jpeg_write_m_header jWrtMHeader +#define jpeg_write_m_byte jWrtMByte +#define jpeg_write_tables jWrtTables +#define jpeg_read_header jReadHeader +#define jpeg_start_decompress jStrtDecompress +#define jpeg_read_scanlines jReadScanlines +#define jpeg_finish_decompress jFinDecompress +#define jpeg_read_raw_data jReadRawData +#define jpeg_has_multiple_scans jHasMultScn +#define jpeg_start_output jStrtOutput +#define jpeg_finish_output jFinOutput +#define jpeg_input_complete jInComplete +#define jpeg_new_colormap jNewCMap +#define jpeg_consume_input jConsumeInput +#define jpeg_core_output_dimensions jCoreDimensions +#define jpeg_calc_output_dimensions jCalcDimensions +#define jpeg_save_markers jSaveMarkers +#define jpeg_set_marker_processor jSetMarker +#define jpeg_read_coefficients jReadCoefs +#define jpeg_write_coefficients jWrtCoefs +#define jpeg_copy_critical_parameters jCopyCrit +#define jpeg_abort_compress jAbrtCompress +#define jpeg_abort_decompress jAbrtDecompress +#define jpeg_abort jAbort +#define jpeg_destroy jDestroy +#define jpeg_resync_to_restart jResyncRestart +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Default error-management setup */ +EXTERN(struct jpeg_error_mgr *) jpeg_std_error + JPP((struct jpeg_error_mgr * err)); + +/* Initialization of JPEG compression objects. + * jpeg_create_compress() and jpeg_create_decompress() are the exported + * names that applications should call. These expand to calls on + * jpeg_CreateCompress and jpeg_CreateDecompress with additional information + * passed for version mismatch checking. + * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx. + */ +#define jpeg_create_compress(cinfo) \ + jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_compress_struct)) +#define jpeg_create_decompress(cinfo) \ + jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_decompress_struct)) +EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo, + int version, size_t structsize)); +EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo, + int version, size_t structsize)); +/* Destruction of JPEG compression objects */ +EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); + +/* Standard data source and destination managers: stdio streams. */ +/* Caller is responsible for opening the file before and closing after. */ +EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); +EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* Data source and destination managers: memory buffers. */ +EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo, + unsigned char ** outbuffer, + unsigned long * outsize)); +EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo, + unsigned char * inbuffer, + unsigned long insize)); + +/* Default parameter setup for compression */ +EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); +/* Compression parameter setup aids */ +EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, + J_COLOR_SPACE colorspace)); +EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, + boolean force_baseline)); +EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, + int scale_factor, + boolean force_baseline)); +EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo, + boolean force_baseline)); +EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, + boolean force_baseline)); +EXTERN(int) jpeg_quality_scaling JPP((int quality)); +EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, + boolean suppress)); +EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); +EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); + +/* Main entry points for compression */ +EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, + boolean write_all_tables)); +EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION num_lines)); +EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); + +/* Precalculate JPEG dimensions for current compression parameters. */ +EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo)); + +/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION num_lines)); + +/* Write a special marker. See libjpeg.txt concerning safe usage. */ +EXTERN(void) jpeg_write_marker + JPP((j_compress_ptr cinfo, int marker, + const JOCTET * dataptr, unsigned int datalen)); +/* Same, but piecemeal. */ +EXTERN(void) jpeg_write_m_header + JPP((j_compress_ptr cinfo, int marker, unsigned int datalen)); +EXTERN(void) jpeg_write_m_byte + JPP((j_compress_ptr cinfo, int val)); + +/* Alternate compression function: just write an abbreviated table file */ +EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); + +/* Decompression startup: read start of JPEG datastream to see what's there */ +EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, + boolean require_image)); +/* Return value is one of: */ +#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ +#define JPEG_HEADER_OK 1 /* Found valid image datastream */ +#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ +/* If you pass require_image = TRUE (normal case), you need not check for + * a TABLES_ONLY return code; an abbreviated file will cause an error exit. + * JPEG_SUSPENDED is only possible if you use a data source module that can + * give a suspension return (the stdio source module doesn't). + */ + +/* Main entry points for decompression */ +EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION max_lines)); +EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); + +/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION max_lines)); + +/* Additional entry points for buffered-image mode. */ +EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, + int scan_number)); +EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); +EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); +/* Return value is one of: */ +/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ +#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ +#define JPEG_REACHED_EOI 2 /* Reached end of image */ +#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ +#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ + +/* Precalculate output dimensions for current decompression parameters. */ +EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); + +/* Control saving of COM and APPn markers into marker_list. */ +EXTERN(void) jpeg_save_markers + JPP((j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit)); + +/* Install a special processing method for COM or APPn markers. */ +EXTERN(void) jpeg_set_marker_processor + JPP((j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine)); + +/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ +EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays)); +EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, + j_compress_ptr dstinfo)); + +/* If you choose to abort compression or decompression before completing + * jpeg_finish_(de)compress, then you need to clean up to release memory, + * temporary files, etc. You can just call jpeg_destroy_(de)compress + * if you're done with the JPEG object, but if you want to clean it up and + * reuse it, call this: + */ +EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); + +/* Generic versions of jpeg_abort and jpeg_destroy that work on either + * flavor of JPEG object. These may be more convenient in some places. + */ +EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); + +/* Default restart-marker-resync procedure for use by data source modules */ +EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, + int desired)); + + +/* These marker codes are exported since applications and data source modules + * are likely to want to use them. + */ + +#define JPEG_RST0 0xD0 /* RST0 marker code */ +#define JPEG_EOI 0xD9 /* EOI marker code */ +#define JPEG_APP0 0xE0 /* APP0 marker code */ +#define JPEG_COM 0xFE /* COM marker code */ + + +/* If we have a brain-damaged compiler that emits warnings (or worse, errors) + * for structure definitions that are never filled in, keep it quiet by + * supplying dummy definitions for the various substructures. + */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +struct jpeg_comp_master { long dummy; }; +struct jpeg_c_main_controller { long dummy; }; +struct jpeg_c_prep_controller { long dummy; }; +struct jpeg_c_coef_controller { long dummy; }; +struct jpeg_marker_writer { long dummy; }; +struct jpeg_color_converter { long dummy; }; +struct jpeg_downsampler { long dummy; }; +struct jpeg_forward_dct { long dummy; }; +struct jpeg_entropy_encoder { long dummy; }; +struct jpeg_decomp_master { long dummy; }; +struct jpeg_d_main_controller { long dummy; }; +struct jpeg_d_coef_controller { long dummy; }; +struct jpeg_d_post_controller { long dummy; }; +struct jpeg_input_controller { long dummy; }; +struct jpeg_marker_reader { long dummy; }; +struct jpeg_entropy_decoder { long dummy; }; +struct jpeg_inverse_dct { long dummy; }; +struct jpeg_upsampler { long dummy; }; +struct jpeg_color_deconverter { long dummy; }; +struct jpeg_color_quantizer { long dummy; }; +#endif /* JPEG_INTERNALS */ +#endif /* INCOMPLETE_TYPES_BROKEN */ + + +/* + * The JPEG library modules define JPEG_INTERNALS before including this file. + * The internal structure declarations are read only when that is true. + * Applications using the library should not include jpegint.h, but may wish + * to include jerror.h. + */ + +#ifdef JPEG_INTERNALS +#include "jpegint.h" /* fetch private declarations */ +#include "jerror.h" /* fetch error codes too */ +#endif + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +} +#endif +#endif + +#endif /* JPEGLIB_H */ diff --git a/src/SDL2/external/jpeg-9/jpegtran.1 b/src/SDL2/external/jpeg-9/jpegtran.1 new file mode 100644 index 000000000..0ad1bbc84 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jpegtran.1 @@ -0,0 +1,285 @@ +.TH JPEGTRAN 1 "28 December 2009" +.SH NAME +jpegtran \- lossless transformation of JPEG files +.SH SYNOPSIS +.B jpegtran +[ +.I options +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B jpegtran +performs various useful transformations of JPEG files. +It can translate the coded representation from one variant of JPEG to another, +for example from baseline JPEG to progressive JPEG or vice versa. It can also +perform some rearrangements of the image data, for example turning an image +from landscape to portrait format by rotation. +.PP +.B jpegtran +works by rearranging the compressed data (DCT coefficients), without +ever fully decoding the image. Therefore, its transformations are lossless: +there is no image degradation at all, which would not be true if you used +.B djpeg +followed by +.B cjpeg +to accomplish the same conversion. But by the same token, +.B jpegtran +cannot perform lossy operations such as changing the image quality. +.PP +.B jpegtran +reads the named JPEG/JFIF file, or the standard input if no file is +named, and produces a JPEG/JFIF file on the standard output. +.SH OPTIONS +All switch names may be abbreviated; for example, +.B \-optimize +may be written +.B \-opt +or +.BR \-o . +Upper and lower case are equivalent. +British spellings are also accepted (e.g., +.BR \-optimise ), +though for brevity these are not mentioned below. +.PP +To specify the coded JPEG representation used in the output file, +.B jpegtran +accepts a subset of the switches recognized by +.BR cjpeg : +.TP +.B \-optimize +Perform optimization of entropy encoding parameters. +.TP +.B \-progressive +Create progressive JPEG file. +.TP +.BI \-restart " N" +Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is +attached to the number. +.TP +.B \-arithmetic +Use arithmetic coding. +.TP +.BI \-scans " file" +Use the scan script given in the specified text file. +.PP +See +.BR cjpeg (1) +for more details about these switches. +If you specify none of these switches, you get a plain baseline-JPEG output +file. The quality setting and so forth are determined by the input file. +.PP +The image can be losslessly transformed by giving one of these switches: +.TP +.B \-flip horizontal +Mirror image horizontally (left-right). +.TP +.B \-flip vertical +Mirror image vertically (top-bottom). +.TP +.B \-rotate 90 +Rotate image 90 degrees clockwise. +.TP +.B \-rotate 180 +Rotate image 180 degrees. +.TP +.B \-rotate 270 +Rotate image 270 degrees clockwise (or 90 ccw). +.TP +.B \-transpose +Transpose image (across UL-to-LR axis). +.TP +.B \-transverse +Transverse transpose (across UR-to-LL axis). +.IP +The transpose transformation has no restrictions regarding image dimensions. +The other transformations operate rather oddly if the image dimensions are not +a multiple of the iMCU size (usually 8 or 16 pixels), because they can only +transform complete blocks of DCT coefficient data in the desired way. +.IP +.BR jpegtran 's +default behavior when transforming an odd-size image is designed +to preserve exact reversibility and mathematical consistency of the +transformation set. As stated, transpose is able to flip the entire image +area. Horizontal mirroring leaves any partial iMCU column at the right edge +untouched, but is able to flip all rows of the image. Similarly, vertical +mirroring leaves any partial iMCU row at the bottom edge untouched, but is +able to flip all columns. The other transforms can be built up as sequences +of transpose and flip operations; for consistency, their actions on edge +pixels are defined to be the same as the end result of the corresponding +transpose-and-flip sequence. +.IP +For practical use, you may prefer to discard any untransformable edge pixels +rather than having a strange-looking strip along the right and/or bottom edges +of a transformed image. To do this, add the +.B \-trim +switch: +.TP +.B \-trim +Drop non-transformable edge blocks. +.IP +Obviously, a transformation with +.B \-trim +is not reversible, so strictly speaking +.B jpegtran +with this switch is not lossless. Also, the expected mathematical +equivalences between the transformations no longer hold. For example, +.B \-rot 270 -trim +trims only the bottom edge, but +.B \-rot 90 -trim +followed by +.B \-rot 180 -trim +trims both edges. +.IP +If you are only interested in perfect transformation, add the +.B \-perfect +switch: +.TP +.B \-perfect +Fails with an error if the transformation is not perfect. +.IP +For example you may want to do +.IP +.B (jpegtran \-rot 90 -perfect +.I foo.jpg +.B || djpeg +.I foo.jpg +.B | pnmflip \-r90 | cjpeg) +.IP +to do a perfect rotation if available or an approximated one if not. +.PP +We also offer a lossless-crop option, which discards data outside a given +image region but losslessly preserves what is inside. Like the rotate and +flip transforms, lossless crop is restricted by the current JPEG format: the +upper left corner of the selected region must fall on an iMCU boundary. If +this does not hold for the given crop parameters, we silently move the upper +left corner up and/or left to make it so, simultaneously increasing the region +dimensions to keep the lower right crop corner unchanged. (Thus, the output +image covers at least the requested region, but may cover more.) + +The image can be losslessly cropped by giving the switch: +.TP +.B \-crop WxH+X+Y +Crop to a rectangular subarea of width W, height H starting at point X,Y. +.PP +Other not-strictly-lossless transformation switches are: +.TP +.B \-grayscale +Force grayscale output. +.IP +This option discards the chrominance channels if the input image is YCbCr +(ie, a standard color JPEG), resulting in a grayscale JPEG file. The +luminance channel is preserved exactly, so this is a better method of reducing +to grayscale than decompression, conversion, and recompression. This switch +is particularly handy for fixing a monochrome picture that was mistakenly +encoded as a color JPEG. (In such a case, the space savings from getting rid +of the near-empty chroma channels won't be large; but the decoding time for +a grayscale JPEG is substantially less than that for a color JPEG.) +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. +.IP +Currently supported scale factors are M/N with all M from 1 to 16, where N is +the source DCT size, which is 8 for baseline JPEG. If the /N part is omitted, +then M specifies the DCT scaled size to be applied on the given input. For +baseline JPEG this is equivalent to M/8 scaling, since the source DCT size +for baseline JPEG is 8. +.B Caution: +An implementation of the JPEG SmartScale extension is required for this +feature. SmartScale enabled JPEG is not yet widely implemented, so many +decoders will be unable to view a SmartScale extended JPEG file at all. +.PP +.B jpegtran +also recognizes these switches that control what to do with "extra" markers, +such as comment blocks: +.TP +.B \-copy none +Copy no extra markers from source file. This setting suppresses all +comments and other excess baggage present in the source file. +.TP +.B \-copy comments +Copy only comment markers. This setting copies comments from the source file, +but discards any other inessential (for image display) data. +.TP +.B \-copy all +Copy all extra markers. This setting preserves miscellaneous markers +found in the source file, such as JFIF thumbnails, Exif data, and Photoshop +settings. In some files these extra markers can be sizable. +.IP +The default behavior is +.BR "\-copy comments" . +(Note: in IJG releases v6 and v6a, +.B jpegtran +always did the equivalent of +.BR "\-copy none" .) +.PP +Additional switches recognized by jpegtran are: +.TP +.BI \-maxmemory " N" +Set limit for amount of memory to use in processing large images. Value is +in thousands of bytes, or millions of bytes if "M" is attached to the +number. For example, +.B \-max 4m +selects 4000000 bytes. If more space is needed, temporary files will be used. +.TP +.BI \-outfile " name" +Send output image to the named file, not to standard output. +.TP +.B \-verbose +Enable debug printout. More +.BR \-v 's +give more output. Also, version information is printed at startup. +.TP +.B \-debug +Same as +.BR \-verbose . +.SH EXAMPLES +.LP +This example converts a baseline JPEG file to progressive form: +.IP +.B jpegtran \-progressive +.I foo.jpg +.B > +.I fooprog.jpg +.PP +This example rotates an image 90 degrees clockwise, discarding any +unrotatable edge pixels: +.IP +.B jpegtran \-rot 90 -trim +.I foo.jpg +.B > +.I foo90.jpg +.SH ENVIRONMENT +.TP +.B JPEGMEM +If this environment variable is set, its value is the default memory limit. +The value is specified as described for the +.B \-maxmemory +switch. +.B JPEGMEM +overrides the default value specified when the program was compiled, and +itself is overridden by an explicit +.BR \-maxmemory . +.SH SEE ALSO +.BR cjpeg (1), +.BR djpeg (1), +.BR rdjpgcom (1), +.BR wrjpgcom (1) +.br +Wallace, Gregory K. "The JPEG Still Picture Compression Standard", +Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. +.SH AUTHOR +Independent JPEG Group +.SH BUGS +The transform options can't transform odd-size images perfectly. Use +.B \-trim +or +.B \-perfect +if you don't like the results. +.PP +The entire image is read into memory and then written out again, even in +cases where this isn't really necessary. Expect swapping on large images, +especially when using the more complex transform options. diff --git a/src/SDL2/external/jpeg-9/jpegtran.c b/src/SDL2/external/jpeg-9/jpegtran.c new file mode 100644 index 000000000..7e8ef0ce4 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jpegtran.c @@ -0,0 +1,560 @@ +/* + * jpegtran.c + * + * Copyright (C) 1995-2012, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a command-line user interface for JPEG transcoding. + * It is very similar to cjpeg.c, and partly to djpeg.c, but provides + * lossless transcoding between different JPEG file formats. It also + * provides some lossless and sort-of-lossless transformations of JPEG data. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include "transupp.h" /* Support routines for jpegtran */ +#include "jversion.h" /* for version message */ + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + + +/* + * Argument-parsing code. + * The switch parser is designed to be useful with DOS-style command line + * syntax, ie, intermixed switches and file names, where only the switches + * to the left of a given file name affect processing of that file. + * The main program in this file doesn't actually use this capability... + */ + + +static const char * progname; /* program name for error messages */ +static char * outfilename; /* for -outfile switch */ +static char * scaleoption; /* -scale switch */ +static JCOPY_OPTION copyoption; /* -copy switch */ +static jpeg_transform_info transformoption; /* image transformation options */ + + +LOCAL(void) +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "usage: %s [switches] ", progname); +#ifdef TWO_FILE_COMMANDLINE + fprintf(stderr, "inputfile outputfile\n"); +#else + fprintf(stderr, "[inputfile]\n"); +#endif + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -copy none Copy no extra markers from source file\n"); + fprintf(stderr, " -copy comments Copy only comment markers (default)\n"); + fprintf(stderr, " -copy all Copy all extra markers\n"); +#ifdef ENTROPY_OPT_SUPPORTED + fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n"); +#endif +#ifdef C_PROGRESSIVE_SUPPORTED + fprintf(stderr, " -progressive Create progressive JPEG file\n"); +#endif + fprintf(stderr, "Switches for modifying the image:\n"); +#if TRANSFORMS_SUPPORTED + fprintf(stderr, " -crop WxH+X+Y Crop to a rectangular subarea\n"); + fprintf(stderr, " -grayscale Reduce to grayscale (omit color data)\n"); + fprintf(stderr, " -flip [horizontal|vertical] Mirror image (left-right or top-bottom)\n"); + fprintf(stderr, " -perfect Fail if there is non-transformable edge blocks\n"); + fprintf(stderr, " -rotate [90|180|270] Rotate image (degrees clockwise)\n"); +#endif + fprintf(stderr, " -scale M/N Scale output image by fraction M/N, eg, 1/8\n"); +#if TRANSFORMS_SUPPORTED + fprintf(stderr, " -transpose Transpose image\n"); + fprintf(stderr, " -transverse Transverse transpose image\n"); + fprintf(stderr, " -trim Drop non-transformable edge blocks\n"); +#endif + fprintf(stderr, "Switches for advanced users:\n"); +#ifdef C_ARITH_CODING_SUPPORTED + fprintf(stderr, " -arithmetic Use arithmetic coding\n"); +#endif + fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n"); + fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); + fprintf(stderr, " -outfile name Specify name for output file\n"); + fprintf(stderr, " -verbose or -debug Emit debug output\n"); + fprintf(stderr, "Switches for wizards:\n"); +#ifdef C_MULTISCAN_FILES_SUPPORTED + fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n"); +#endif + exit(EXIT_FAILURE); +} + + +LOCAL(void) +select_transform (JXFORM_CODE transform) +/* Silly little routine to detect multiple transform options, + * which we can't handle. + */ +{ +#if TRANSFORMS_SUPPORTED + if (transformoption.transform == JXFORM_NONE || + transformoption.transform == transform) { + transformoption.transform = transform; + } else { + fprintf(stderr, "%s: can only do one image transformation at a time\n", + progname); + usage(); + } +#else + fprintf(stderr, "%s: sorry, image transformation was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif +} + + +LOCAL(int) +parse_switches (j_compress_ptr cinfo, int argc, char **argv, + int last_file_arg_seen, boolean for_real) +/* Parse optional switches. + * Returns argv[] index of first file-name argument (== argc if none). + * Any file names with indexes <= last_file_arg_seen are ignored; + * they have presumably been processed in a previous iteration. + * (Pass 0 for last_file_arg_seen on the first or only iteration.) + * for_real is FALSE on the first (dummy) pass; we may skip any expensive + * processing. + */ +{ + int argn; + char * arg; + boolean simple_progressive; + char * scansarg = NULL; /* saves -scans parm if any */ + + /* Set up default JPEG parameters. */ + simple_progressive = FALSE; + outfilename = NULL; + scaleoption = NULL; + copyoption = JCOPYOPT_DEFAULT; + transformoption.transform = JXFORM_NONE; + transformoption.perfect = FALSE; + transformoption.trim = FALSE; + transformoption.force_grayscale = FALSE; + transformoption.crop = FALSE; + cinfo->err->trace_level = 0; + + /* Scan command line options, adjust parameters */ + + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (*arg != '-') { + /* Not a switch, must be a file name argument */ + if (argn <= last_file_arg_seen) { + outfilename = NULL; /* -outfile applies to just one input file */ + continue; /* ignore this name if previously processed */ + } + break; /* else done parsing switches */ + } + arg++; /* advance past switch marker character */ + + if (keymatch(arg, "arithmetic", 1)) { + /* Use arithmetic coding. */ +#ifdef C_ARITH_CODING_SUPPORTED + cinfo->arith_code = TRUE; +#else + fprintf(stderr, "%s: sorry, arithmetic coding not supported\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "copy", 2)) { + /* Select which extra markers to copy. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "none", 1)) { + copyoption = JCOPYOPT_NONE; + } else if (keymatch(argv[argn], "comments", 1)) { + copyoption = JCOPYOPT_COMMENTS; + } else if (keymatch(argv[argn], "all", 1)) { + copyoption = JCOPYOPT_ALL; + } else + usage(); + + } else if (keymatch(arg, "crop", 2)) { + /* Perform lossless cropping. */ +#if TRANSFORMS_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + if (! jtransform_parse_crop_spec(&transformoption, argv[argn])) { + fprintf(stderr, "%s: bogus -crop argument '%s'\n", + progname, argv[argn]); + exit(EXIT_FAILURE); + } +#else + select_transform(JXFORM_NONE); /* force an error */ +#endif + + } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { + /* Enable debug printouts. */ + /* On first -d, print version identification */ + static boolean printed_version = FALSE; + + if (! printed_version) { + fprintf(stderr, "Independent JPEG Group's JPEGTRAN, version %s\n%s\n", + JVERSION, JCOPYRIGHT); + printed_version = TRUE; + } + cinfo->err->trace_level++; + + } else if (keymatch(arg, "flip", 1)) { + /* Mirror left-right or top-bottom. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "horizontal", 1)) + select_transform(JXFORM_FLIP_H); + else if (keymatch(argv[argn], "vertical", 1)) + select_transform(JXFORM_FLIP_V); + else + usage(); + + } else if (keymatch(arg, "grayscale", 1) || keymatch(arg, "greyscale",1)) { + /* Force to grayscale. */ +#if TRANSFORMS_SUPPORTED + transformoption.force_grayscale = TRUE; +#else + select_transform(JXFORM_NONE); /* force an error */ +#endif + + } else if (keymatch(arg, "maxmemory", 3)) { + /* Maximum memory in Kb (or Mb with 'm'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (ch == 'm' || ch == 'M') + lval *= 1000L; + cinfo->mem->max_memory_to_use = lval * 1000L; + + } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) { + /* Enable entropy parm optimization. */ +#ifdef ENTROPY_OPT_SUPPORTED + cinfo->optimize_coding = TRUE; +#else + fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "outfile", 4)) { + /* Set output file name. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + outfilename = argv[argn]; /* save it away for later use */ + + } else if (keymatch(arg, "perfect", 2)) { + /* Fail if there is any partial edge MCUs that the transform can't + * handle. */ + transformoption.perfect = TRUE; + + } else if (keymatch(arg, "progressive", 2)) { + /* Select simple progressive mode. */ +#ifdef C_PROGRESSIVE_SUPPORTED + simple_progressive = TRUE; + /* We must postpone execution until num_components is known. */ +#else + fprintf(stderr, "%s: sorry, progressive output was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "restart", 1)) { + /* Restart interval in MCU rows (or in MCUs with 'b'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (lval < 0 || lval > 65535L) + usage(); + if (ch == 'b' || ch == 'B') { + cinfo->restart_interval = (unsigned int) lval; + cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */ + } else { + cinfo->restart_in_rows = (int) lval; + /* restart_interval will be computed during startup */ + } + + } else if (keymatch(arg, "rotate", 2)) { + /* Rotate 90, 180, or 270 degrees (measured clockwise). */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "90", 2)) + select_transform(JXFORM_ROT_90); + else if (keymatch(argv[argn], "180", 3)) + select_transform(JXFORM_ROT_180); + else if (keymatch(argv[argn], "270", 3)) + select_transform(JXFORM_ROT_270); + else + usage(); + + } else if (keymatch(arg, "scale", 4)) { + /* Scale the output image by a fraction M/N. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + scaleoption = argv[argn]; + /* We must postpone processing until decompression startup. */ + + } else if (keymatch(arg, "scans", 1)) { + /* Set scan script. */ +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + scansarg = argv[argn]; + /* We must postpone reading the file in case -progressive appears. */ +#else + fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "transpose", 1)) { + /* Transpose (across UL-to-LR axis). */ + select_transform(JXFORM_TRANSPOSE); + + } else if (keymatch(arg, "transverse", 6)) { + /* Transverse transpose (across UR-to-LL axis). */ + select_transform(JXFORM_TRANSVERSE); + + } else if (keymatch(arg, "trim", 3)) { + /* Trim off any partial edge MCUs that the transform can't handle. */ + transformoption.trim = TRUE; + + } else { + usage(); /* bogus switch */ + } + } + + /* Post-switch-scanning cleanup */ + + if (for_real) { + +#ifdef C_PROGRESSIVE_SUPPORTED + if (simple_progressive) /* process -progressive; -scans can override */ + jpeg_simple_progression(cinfo); +#endif + +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (scansarg != NULL) /* process -scans if it was present */ + if (! read_scan_script(cinfo, scansarg)) + usage(); +#endif + } + + return argn; /* return index of next arg (file name) */ +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + struct jpeg_decompress_struct srcinfo; + struct jpeg_compress_struct dstinfo; + struct jpeg_error_mgr jsrcerr, jdsterr; +#ifdef PROGRESS_REPORT + struct cdjpeg_progress_mgr progress; +#endif + jvirt_barray_ptr * src_coef_arrays; + jvirt_barray_ptr * dst_coef_arrays; + int file_index; + /* We assume all-in-memory processing and can therefore use only a + * single file pointer for sequential input and output operation. + */ + FILE * fp; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "jpegtran"; /* in case C library doesn't provide it */ + + /* Initialize the JPEG decompression object with default error handling. */ + srcinfo.err = jpeg_std_error(&jsrcerr); + jpeg_create_decompress(&srcinfo); + /* Initialize the JPEG compression object with default error handling. */ + dstinfo.err = jpeg_std_error(&jdsterr); + jpeg_create_compress(&dstinfo); + + /* Now safe to enable signal catcher. + * Note: we assume only the decompression object will have virtual arrays. + */ +#ifdef NEED_SIGNAL_CATCHER + enable_signal_catcher((j_common_ptr) &srcinfo); +#endif + + /* Scan command line to find file names. + * It is convenient to use just one switch-parsing routine, but the switch + * values read here are mostly ignored; we will rescan the switches after + * opening the input file. Also note that most of the switches affect the + * destination JPEG object, so we parse into that and then copy over what + * needs to affects the source too. + */ + + file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE); + jsrcerr.trace_level = jdsterr.trace_level; + srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use; + +#ifdef TWO_FILE_COMMANDLINE + /* Must have either -outfile switch or explicit output file name */ + if (outfilename == NULL) { + if (file_index != argc-2) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + outfilename = argv[file_index+1]; + } else { + if (file_index != argc-1) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + } +#else + /* Unix style: expect zero or one file name */ + if (file_index < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } +#endif /* TWO_FILE_COMMANDLINE */ + + /* Open the input file. */ + if (file_index < argc) { + if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s for reading\n", progname, argv[file_index]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ + fp = read_stdin(); + } + +#ifdef PROGRESS_REPORT + start_progress_monitor((j_common_ptr) &dstinfo, &progress); +#endif + + /* Specify data source for decompression */ + jpeg_stdio_src(&srcinfo, fp); + + /* Enable saving of extra markers that we want to copy */ + jcopy_markers_setup(&srcinfo, copyoption); + + /* Read file header */ + (void) jpeg_read_header(&srcinfo, TRUE); + + /* Adjust default decompression parameters */ + if (scaleoption != NULL) + if (sscanf(scaleoption, "%u/%u", + &srcinfo.scale_num, &srcinfo.scale_denom) < 1) + usage(); + + /* Any space needed by a transform option must be requested before + * jpeg_read_coefficients so that memory allocation will be done right. + */ +#if TRANSFORMS_SUPPORTED + /* Fail right away if -perfect is given and transformation is not perfect. + */ + if (!jtransform_request_workspace(&srcinfo, &transformoption)) { + fprintf(stderr, "%s: transformation is not perfect\n", progname); + exit(EXIT_FAILURE); + } +#endif + + /* Read source file as DCT coefficients */ + src_coef_arrays = jpeg_read_coefficients(&srcinfo); + + /* Initialize destination compression parameters from source values */ + jpeg_copy_critical_parameters(&srcinfo, &dstinfo); + + /* Adjust destination parameters if required by transform options; + * also find out which set of coefficient arrays will hold the output. + */ +#if TRANSFORMS_SUPPORTED + dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo, + src_coef_arrays, + &transformoption); +#else + dst_coef_arrays = src_coef_arrays; +#endif + + /* Close input file, if we opened it. + * Note: we assume that jpeg_read_coefficients consumed all input + * until JPEG_REACHED_EOI, and that jpeg_finish_decompress will + * only consume more while (! cinfo->inputctl->eoi_reached). + * We cannot call jpeg_finish_decompress here since we still need the + * virtual arrays allocated from the source object for processing. + */ + if (fp != stdin) + fclose(fp); + + /* Open the output file. */ + if (outfilename != NULL) { + if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s for writing\n", progname, outfilename); + exit(EXIT_FAILURE); + } + } else { + /* default output file is stdout */ + fp = write_stdout(); + } + + /* Adjust default compression parameters by re-parsing the options */ + file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE); + + /* Specify data destination for compression */ + jpeg_stdio_dest(&dstinfo, fp); + + /* Start compressor (note no image data is actually written here) */ + jpeg_write_coefficients(&dstinfo, dst_coef_arrays); + + /* Copy to the output file any extra markers that we want to preserve */ + jcopy_markers_execute(&srcinfo, &dstinfo, copyoption); + + /* Execute image transformation, if any */ +#if TRANSFORMS_SUPPORTED + jtransform_execute_transformation(&srcinfo, &dstinfo, + src_coef_arrays, + &transformoption); +#endif + + /* Finish compression and release memory */ + jpeg_finish_compress(&dstinfo); + jpeg_destroy_compress(&dstinfo); + (void) jpeg_finish_decompress(&srcinfo); + jpeg_destroy_decompress(&srcinfo); + + /* Close output file, if we opened it */ + if (fp != stdout) + fclose(fp); + +#ifdef PROGRESS_REPORT + end_progress_monitor((j_common_ptr) &dstinfo); +#endif + + /* All done. */ + exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/src/SDL2/external/jpeg-9/jquant1.c b/src/SDL2/external/jpeg-9/jquant1.c new file mode 100644 index 000000000..9d11f7066 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jquant1.c @@ -0,0 +1,857 @@ +/* + * jquant1.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains 1-pass color quantization (color mapping) routines. + * These routines provide mapping to a fixed color map using equally spaced + * color values. Optional Floyd-Steinberg or ordered dithering is available. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +#ifdef QUANT_1PASS_SUPPORTED + + +/* + * The main purpose of 1-pass quantization is to provide a fast, if not very + * high quality, colormapped output capability. A 2-pass quantizer usually + * gives better visual quality; however, for quantized grayscale output this + * quantizer is perfectly adequate. Dithering is highly recommended with this + * quantizer, though you can turn it off if you really want to. + * + * In 1-pass quantization the colormap must be chosen in advance of seeing the + * image. We use a map consisting of all combinations of Ncolors[i] color + * values for the i'th component. The Ncolors[] values are chosen so that + * their product, the total number of colors, is no more than that requested. + * (In most cases, the product will be somewhat less.) + * + * Since the colormap is orthogonal, the representative value for each color + * component can be determined without considering the other components; + * then these indexes can be combined into a colormap index by a standard + * N-dimensional-array-subscript calculation. Most of the arithmetic involved + * can be precalculated and stored in the lookup table colorindex[]. + * colorindex[i][j] maps pixel value j in component i to the nearest + * representative value (grid plane) for that component; this index is + * multiplied by the array stride for component i, so that the + * index of the colormap entry closest to a given pixel value is just + * sum( colorindex[component-number][pixel-component-value] ) + * Aside from being fast, this scheme allows for variable spacing between + * representative values with no additional lookup cost. + * + * If gamma correction has been applied in color conversion, it might be wise + * to adjust the color grid spacing so that the representative colors are + * equidistant in linear space. At this writing, gamma correction is not + * implemented by jdcolor, so nothing is done here. + */ + + +/* Declarations for ordered dithering. + * + * We use a standard 16x16 ordered dither array. The basic concept of ordered + * dithering is described in many references, for instance Dale Schumacher's + * chapter II.2 of Graphics Gems II (James Arvo, ed. Academic Press, 1991). + * In place of Schumacher's comparisons against a "threshold" value, we add a + * "dither" value to the input pixel and then round the result to the nearest + * output value. The dither value is equivalent to (0.5 - threshold) times + * the distance between output values. For ordered dithering, we assume that + * the output colors are equally spaced; if not, results will probably be + * worse, since the dither may be too much or too little at a given point. + * + * The normal calculation would be to form pixel value + dither, range-limit + * this to 0..MAXJSAMPLE, and then index into the colorindex table as usual. + * We can skip the separate range-limiting step by extending the colorindex + * table in both directions. + */ + +#define ODITHER_SIZE 16 /* dimension of dither matrix */ +/* NB: if ODITHER_SIZE is not a power of 2, ODITHER_MASK uses will break */ +#define ODITHER_CELLS (ODITHER_SIZE*ODITHER_SIZE) /* # cells in matrix */ +#define ODITHER_MASK (ODITHER_SIZE-1) /* mask for wrapping around counters */ + +typedef int ODITHER_MATRIX[ODITHER_SIZE][ODITHER_SIZE]; +typedef int (*ODITHER_MATRIX_PTR)[ODITHER_SIZE]; + +static const UINT8 base_dither_matrix[ODITHER_SIZE][ODITHER_SIZE] = { + /* Bayer's order-4 dither array. Generated by the code given in + * Stephen Hawley's article "Ordered Dithering" in Graphics Gems I. + * The values in this array must range from 0 to ODITHER_CELLS-1. + */ + { 0,192, 48,240, 12,204, 60,252, 3,195, 51,243, 15,207, 63,255 }, + { 128, 64,176,112,140, 76,188,124,131, 67,179,115,143, 79,191,127 }, + { 32,224, 16,208, 44,236, 28,220, 35,227, 19,211, 47,239, 31,223 }, + { 160, 96,144, 80,172,108,156, 92,163, 99,147, 83,175,111,159, 95 }, + { 8,200, 56,248, 4,196, 52,244, 11,203, 59,251, 7,199, 55,247 }, + { 136, 72,184,120,132, 68,180,116,139, 75,187,123,135, 71,183,119 }, + { 40,232, 24,216, 36,228, 20,212, 43,235, 27,219, 39,231, 23,215 }, + { 168,104,152, 88,164,100,148, 84,171,107,155, 91,167,103,151, 87 }, + { 2,194, 50,242, 14,206, 62,254, 1,193, 49,241, 13,205, 61,253 }, + { 130, 66,178,114,142, 78,190,126,129, 65,177,113,141, 77,189,125 }, + { 34,226, 18,210, 46,238, 30,222, 33,225, 17,209, 45,237, 29,221 }, + { 162, 98,146, 82,174,110,158, 94,161, 97,145, 81,173,109,157, 93 }, + { 10,202, 58,250, 6,198, 54,246, 9,201, 57,249, 5,197, 53,245 }, + { 138, 74,186,122,134, 70,182,118,137, 73,185,121,133, 69,181,117 }, + { 42,234, 26,218, 38,230, 22,214, 41,233, 25,217, 37,229, 21,213 }, + { 170,106,154, 90,166,102,150, 86,169,105,153, 89,165,101,149, 85 } +}; + + +/* Declarations for Floyd-Steinberg dithering. + * + * Errors are accumulated into the array fserrors[], at a resolution of + * 1/16th of a pixel count. The error at a given pixel is propagated + * to its not-yet-processed neighbors using the standard F-S fractions, + * ... (here) 7/16 + * 3/16 5/16 1/16 + * We work left-to-right on even rows, right-to-left on odd rows. + * + * We can get away with a single array (holding one row's worth of errors) + * by using it to store the current row's errors at pixel columns not yet + * processed, but the next row's errors at columns already processed. We + * need only a few extra variables to hold the errors immediately around the + * current column. (If we are lucky, those variables are in registers, but + * even if not, they're probably cheaper to access than array elements are.) + * + * The fserrors[] array is indexed [component#][position]. + * We provide (#columns + 2) entries per component; the extra entry at each + * end saves us from special-casing the first and last pixels. + * + * Note: on a wide image, we might not have enough room in a PC's near data + * segment to hold the error array; so it is allocated with alloc_large. + */ + +#if BITS_IN_JSAMPLE == 8 +typedef INT16 FSERROR; /* 16 bits should be enough */ +typedef int LOCFSERROR; /* use 'int' for calculation temps */ +#else +typedef INT32 FSERROR; /* may need more than 16 bits */ +typedef INT32 LOCFSERROR; /* be sure calculation temps are big enough */ +#endif + +typedef FSERROR FAR *FSERRPTR; /* pointer to error array (in FAR storage!) */ + + +/* Private subobject */ + +#define MAX_Q_COMPS 4 /* max components I can handle */ + +typedef struct { + struct jpeg_color_quantizer pub; /* public fields */ + + /* Initially allocated colormap is saved here */ + JSAMPARRAY sv_colormap; /* The color map as a 2-D pixel array */ + int sv_actual; /* number of entries in use */ + + JSAMPARRAY colorindex; /* Precomputed mapping for speed */ + /* colorindex[i][j] = index of color closest to pixel value j in component i, + * premultiplied as described above. Since colormap indexes must fit into + * JSAMPLEs, the entries of this array will too. + */ + boolean is_padded; /* is the colorindex padded for odither? */ + + int Ncolors[MAX_Q_COMPS]; /* # of values alloced to each component */ + + /* Variables for ordered dithering */ + int row_index; /* cur row's vertical index in dither matrix */ + ODITHER_MATRIX_PTR odither[MAX_Q_COMPS]; /* one dither array per component */ + + /* Variables for Floyd-Steinberg dithering */ + FSERRPTR fserrors[MAX_Q_COMPS]; /* accumulated errors */ + boolean on_odd_row; /* flag to remember which row we are on */ +} my_cquantizer; + +typedef my_cquantizer * my_cquantize_ptr; + + +/* + * Policy-making subroutines for create_colormap and create_colorindex. + * These routines determine the colormap to be used. The rest of the module + * only assumes that the colormap is orthogonal. + * + * * select_ncolors decides how to divvy up the available colors + * among the components. + * * output_value defines the set of representative values for a component. + * * largest_input_value defines the mapping from input values to + * representative values for a component. + * Note that the latter two routines may impose different policies for + * different components, though this is not currently done. + */ + + +LOCAL(int) +select_ncolors (j_decompress_ptr cinfo, int Ncolors[]) +/* Determine allocation of desired colors to components, */ +/* and fill in Ncolors[] array to indicate choice. */ +/* Return value is total number of colors (product of Ncolors[] values). */ +{ + int nc = cinfo->out_color_components; /* number of color components */ + int max_colors = cinfo->desired_number_of_colors; + int total_colors, iroot, i, j; + boolean changed; + long temp; + static const int RGB_order[3] = { RGB_GREEN, RGB_RED, RGB_BLUE }; + + /* We can allocate at least the nc'th root of max_colors per component. */ + /* Compute floor(nc'th root of max_colors). */ + iroot = 1; + do { + iroot++; + temp = iroot; /* set temp = iroot ** nc */ + for (i = 1; i < nc; i++) + temp *= iroot; + } while (temp <= (long) max_colors); /* repeat till iroot exceeds root */ + iroot--; /* now iroot = floor(root) */ + + /* Must have at least 2 color values per component */ + if (iroot < 2) + ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, (int) temp); + + /* Initialize to iroot color values for each component */ + total_colors = 1; + for (i = 0; i < nc; i++) { + Ncolors[i] = iroot; + total_colors *= iroot; + } + /* We may be able to increment the count for one or more components without + * exceeding max_colors, though we know not all can be incremented. + * Sometimes, the first component can be incremented more than once! + * (Example: for 16 colors, we start at 2*2*2, go to 3*2*2, then 4*2*2.) + * In RGB colorspace, try to increment G first, then R, then B. + */ + do { + changed = FALSE; + for (i = 0; i < nc; i++) { + j = (cinfo->out_color_space == JCS_RGB ? RGB_order[i] : i); + /* calculate new total_colors if Ncolors[j] is incremented */ + temp = total_colors / Ncolors[j]; + temp *= Ncolors[j]+1; /* done in long arith to avoid oflo */ + if (temp > (long) max_colors) + break; /* won't fit, done with this pass */ + Ncolors[j]++; /* OK, apply the increment */ + total_colors = (int) temp; + changed = TRUE; + } + } while (changed); + + return total_colors; +} + + +LOCAL(int) +output_value (j_decompress_ptr cinfo, int ci, int j, int maxj) +/* Return j'th output value, where j will range from 0 to maxj */ +/* The output values must fall in 0..MAXJSAMPLE in increasing order */ +{ + /* We always provide values 0 and MAXJSAMPLE for each component; + * any additional values are equally spaced between these limits. + * (Forcing the upper and lower values to the limits ensures that + * dithering can't produce a color outside the selected gamut.) + */ + return (int) (((INT32) j * MAXJSAMPLE + maxj/2) / maxj); +} + + +LOCAL(int) +largest_input_value (j_decompress_ptr cinfo, int ci, int j, int maxj) +/* Return largest input value that should map to j'th output value */ +/* Must have largest(j=0) >= 0, and largest(j=maxj) >= MAXJSAMPLE */ +{ + /* Breakpoints are halfway between values returned by output_value */ + return (int) (((INT32) (2*j + 1) * MAXJSAMPLE + maxj) / (2*maxj)); +} + + +/* + * Create the colormap. + */ + +LOCAL(void) +create_colormap (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + JSAMPARRAY colormap; /* Created colormap */ + int total_colors; /* Number of distinct output colors */ + int i,j,k, nci, blksize, blkdist, ptr, val; + + /* Select number of colors for each component */ + total_colors = select_ncolors(cinfo, cquantize->Ncolors); + + /* Report selected color counts */ + if (cinfo->out_color_components == 3) + TRACEMS4(cinfo, 1, JTRC_QUANT_3_NCOLORS, + total_colors, cquantize->Ncolors[0], + cquantize->Ncolors[1], cquantize->Ncolors[2]); + else + TRACEMS1(cinfo, 1, JTRC_QUANT_NCOLORS, total_colors); + + /* Allocate and fill in the colormap. */ + /* The colors are ordered in the map in standard row-major order, */ + /* i.e. rightmost (highest-indexed) color changes most rapidly. */ + + colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) total_colors, (JDIMENSION) cinfo->out_color_components); + + /* blksize is number of adjacent repeated entries for a component */ + /* blkdist is distance between groups of identical entries for a component */ + blkdist = total_colors; + + for (i = 0; i < cinfo->out_color_components; i++) { + /* fill in colormap entries for i'th color component */ + nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ + blksize = blkdist / nci; + for (j = 0; j < nci; j++) { + /* Compute j'th output value (out of nci) for component */ + val = output_value(cinfo, i, j, nci-1); + /* Fill in all colormap entries that have this value of this component */ + for (ptr = j * blksize; ptr < total_colors; ptr += blkdist) { + /* fill in blksize entries beginning at ptr */ + for (k = 0; k < blksize; k++) + colormap[i][ptr+k] = (JSAMPLE) val; + } + } + blkdist = blksize; /* blksize of this color is blkdist of next */ + } + + /* Save the colormap in private storage, + * where it will survive color quantization mode changes. + */ + cquantize->sv_colormap = colormap; + cquantize->sv_actual = total_colors; +} + + +/* + * Create the color index table. + */ + +LOCAL(void) +create_colorindex (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + JSAMPROW indexptr; + int i,j,k, nci, blksize, val, pad; + + /* For ordered dither, we pad the color index tables by MAXJSAMPLE in + * each direction (input index values can be -MAXJSAMPLE .. 2*MAXJSAMPLE). + * This is not necessary in the other dithering modes. However, we + * flag whether it was done in case user changes dithering mode. + */ + if (cinfo->dither_mode == JDITHER_ORDERED) { + pad = MAXJSAMPLE*2; + cquantize->is_padded = TRUE; + } else { + pad = 0; + cquantize->is_padded = FALSE; + } + + cquantize->colorindex = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (MAXJSAMPLE+1 + pad), + (JDIMENSION) cinfo->out_color_components); + + /* blksize is number of adjacent repeated entries for a component */ + blksize = cquantize->sv_actual; + + for (i = 0; i < cinfo->out_color_components; i++) { + /* fill in colorindex entries for i'th color component */ + nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ + blksize = blksize / nci; + + /* adjust colorindex pointers to provide padding at negative indexes. */ + if (pad) + cquantize->colorindex[i] += MAXJSAMPLE; + + /* in loop, val = index of current output value, */ + /* and k = largest j that maps to current val */ + indexptr = cquantize->colorindex[i]; + val = 0; + k = largest_input_value(cinfo, i, 0, nci-1); + for (j = 0; j <= MAXJSAMPLE; j++) { + while (j > k) /* advance val if past boundary */ + k = largest_input_value(cinfo, i, ++val, nci-1); + /* premultiply so that no multiplication needed in main processing */ + indexptr[j] = (JSAMPLE) (val * blksize); + } + /* Pad at both ends if necessary */ + if (pad) + for (j = 1; j <= MAXJSAMPLE; j++) { + indexptr[-j] = indexptr[0]; + indexptr[MAXJSAMPLE+j] = indexptr[MAXJSAMPLE]; + } + } +} + + +/* + * Create an ordered-dither array for a component having ncolors + * distinct output values. + */ + +LOCAL(ODITHER_MATRIX_PTR) +make_odither_array (j_decompress_ptr cinfo, int ncolors) +{ + ODITHER_MATRIX_PTR odither; + int j,k; + INT32 num,den; + + odither = (ODITHER_MATRIX_PTR) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(ODITHER_MATRIX)); + /* The inter-value distance for this color is MAXJSAMPLE/(ncolors-1). + * Hence the dither value for the matrix cell with fill order f + * (f=0..N-1) should be (N-1-2*f)/(2*N) * MAXJSAMPLE/(ncolors-1). + * On 16-bit-int machine, be careful to avoid overflow. + */ + den = 2 * ODITHER_CELLS * ((INT32) (ncolors - 1)); + for (j = 0; j < ODITHER_SIZE; j++) { + for (k = 0; k < ODITHER_SIZE; k++) { + num = ((INT32) (ODITHER_CELLS-1 - 2*((int)base_dither_matrix[j][k]))) + * MAXJSAMPLE; + /* Ensure round towards zero despite C's lack of consistency + * about rounding negative values in integer division... + */ + odither[j][k] = (int) (num<0 ? -((-num)/den) : num/den); + } + } + return odither; +} + + +/* + * Create the ordered-dither tables. + * Components having the same number of representative colors may + * share a dither table. + */ + +LOCAL(void) +create_odither_tables (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + ODITHER_MATRIX_PTR odither; + int i, j, nci; + + for (i = 0; i < cinfo->out_color_components; i++) { + nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ + odither = NULL; /* search for matching prior component */ + for (j = 0; j < i; j++) { + if (nci == cquantize->Ncolors[j]) { + odither = cquantize->odither[j]; + break; + } + } + if (odither == NULL) /* need a new table? */ + odither = make_odither_array(cinfo, nci); + cquantize->odither[i] = odither; + } +} + + +/* + * Map some rows of pixels to the output colormapped representation. + */ + +METHODDEF(void) +color_quantize (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* General case, no dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + JSAMPARRAY colorindex = cquantize->colorindex; + register int pixcode, ci; + register JSAMPROW ptrin, ptrout; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + register int nc = cinfo->out_color_components; + + for (row = 0; row < num_rows; row++) { + ptrin = input_buf[row]; + ptrout = output_buf[row]; + for (col = width; col > 0; col--) { + pixcode = 0; + for (ci = 0; ci < nc; ci++) { + pixcode += GETJSAMPLE(colorindex[ci][GETJSAMPLE(*ptrin++)]); + } + *ptrout++ = (JSAMPLE) pixcode; + } + } +} + + +METHODDEF(void) +color_quantize3 (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* Fast path for out_color_components==3, no dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register int pixcode; + register JSAMPROW ptrin, ptrout; + JSAMPROW colorindex0 = cquantize->colorindex[0]; + JSAMPROW colorindex1 = cquantize->colorindex[1]; + JSAMPROW colorindex2 = cquantize->colorindex[2]; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + ptrin = input_buf[row]; + ptrout = output_buf[row]; + for (col = width; col > 0; col--) { + pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*ptrin++)]); + pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*ptrin++)]); + pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*ptrin++)]); + *ptrout++ = (JSAMPLE) pixcode; + } + } +} + + +METHODDEF(void) +quantize_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* General case, with ordered dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register JSAMPROW input_ptr; + register JSAMPROW output_ptr; + JSAMPROW colorindex_ci; + int * dither; /* points to active row of dither matrix */ + int row_index, col_index; /* current indexes into dither matrix */ + int nc = cinfo->out_color_components; + int ci; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + /* Initialize output values to 0 so can process components separately */ + FMEMZERO((void FAR *) output_buf[row], + (size_t) (width * SIZEOF(JSAMPLE))); + row_index = cquantize->row_index; + for (ci = 0; ci < nc; ci++) { + input_ptr = input_buf[row] + ci; + output_ptr = output_buf[row]; + colorindex_ci = cquantize->colorindex[ci]; + dither = cquantize->odither[ci][row_index]; + col_index = 0; + + for (col = width; col > 0; col--) { + /* Form pixel value + dither, range-limit to 0..MAXJSAMPLE, + * select output value, accumulate into output code for this pixel. + * Range-limiting need not be done explicitly, as we have extended + * the colorindex table to produce the right answers for out-of-range + * inputs. The maximum dither is +- MAXJSAMPLE; this sets the + * required amount of padding. + */ + *output_ptr += colorindex_ci[GETJSAMPLE(*input_ptr)+dither[col_index]]; + input_ptr += nc; + output_ptr++; + col_index = (col_index + 1) & ODITHER_MASK; + } + } + /* Advance row index for next row */ + row_index = (row_index + 1) & ODITHER_MASK; + cquantize->row_index = row_index; + } +} + + +METHODDEF(void) +quantize3_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* Fast path for out_color_components==3, with ordered dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register int pixcode; + register JSAMPROW input_ptr; + register JSAMPROW output_ptr; + JSAMPROW colorindex0 = cquantize->colorindex[0]; + JSAMPROW colorindex1 = cquantize->colorindex[1]; + JSAMPROW colorindex2 = cquantize->colorindex[2]; + int * dither0; /* points to active row of dither matrix */ + int * dither1; + int * dither2; + int row_index, col_index; /* current indexes into dither matrix */ + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + row_index = cquantize->row_index; + input_ptr = input_buf[row]; + output_ptr = output_buf[row]; + dither0 = cquantize->odither[0][row_index]; + dither1 = cquantize->odither[1][row_index]; + dither2 = cquantize->odither[2][row_index]; + col_index = 0; + + for (col = width; col > 0; col--) { + pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*input_ptr++) + + dither0[col_index]]); + pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*input_ptr++) + + dither1[col_index]]); + pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*input_ptr++) + + dither2[col_index]]); + *output_ptr++ = (JSAMPLE) pixcode; + col_index = (col_index + 1) & ODITHER_MASK; + } + row_index = (row_index + 1) & ODITHER_MASK; + cquantize->row_index = row_index; + } +} + + +METHODDEF(void) +quantize_fs_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* General case, with Floyd-Steinberg dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register LOCFSERROR cur; /* current error or pixel value */ + LOCFSERROR belowerr; /* error for pixel below cur */ + LOCFSERROR bpreverr; /* error for below/prev col */ + LOCFSERROR bnexterr; /* error for below/next col */ + LOCFSERROR delta; + register FSERRPTR errorptr; /* => fserrors[] at column before current */ + register JSAMPROW input_ptr; + register JSAMPROW output_ptr; + JSAMPROW colorindex_ci; + JSAMPROW colormap_ci; + int pixcode; + int nc = cinfo->out_color_components; + int dir; /* 1 for left-to-right, -1 for right-to-left */ + int dirnc; /* dir * nc */ + int ci; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + JSAMPLE *range_limit = cinfo->sample_range_limit; + SHIFT_TEMPS + + for (row = 0; row < num_rows; row++) { + /* Initialize output values to 0 so can process components separately */ + FMEMZERO((void FAR *) output_buf[row], + (size_t) (width * SIZEOF(JSAMPLE))); + for (ci = 0; ci < nc; ci++) { + input_ptr = input_buf[row] + ci; + output_ptr = output_buf[row]; + if (cquantize->on_odd_row) { + /* work right to left in this row */ + input_ptr += (width-1) * nc; /* so point to rightmost pixel */ + output_ptr += width-1; + dir = -1; + dirnc = -nc; + errorptr = cquantize->fserrors[ci] + (width+1); /* => entry after last column */ + } else { + /* work left to right in this row */ + dir = 1; + dirnc = nc; + errorptr = cquantize->fserrors[ci]; /* => entry before first column */ + } + colorindex_ci = cquantize->colorindex[ci]; + colormap_ci = cquantize->sv_colormap[ci]; + /* Preset error values: no error propagated to first pixel from left */ + cur = 0; + /* and no error propagated to row below yet */ + belowerr = bpreverr = 0; + + for (col = width; col > 0; col--) { + /* cur holds the error propagated from the previous pixel on the + * current line. Add the error propagated from the previous line + * to form the complete error correction term for this pixel, and + * round the error term (which is expressed * 16) to an integer. + * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct + * for either sign of the error value. + * Note: errorptr points to *previous* column's array entry. + */ + cur = RIGHT_SHIFT(cur + errorptr[dir] + 8, 4); + /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. + * The maximum error is +- MAXJSAMPLE; this sets the required size + * of the range_limit array. + */ + cur += GETJSAMPLE(*input_ptr); + cur = GETJSAMPLE(range_limit[cur]); + /* Select output value, accumulate into output code for this pixel */ + pixcode = GETJSAMPLE(colorindex_ci[cur]); + *output_ptr += (JSAMPLE) pixcode; + /* Compute actual representation error at this pixel */ + /* Note: we can do this even though we don't have the final */ + /* pixel code, because the colormap is orthogonal. */ + cur -= GETJSAMPLE(colormap_ci[pixcode]); + /* Compute error fractions to be propagated to adjacent pixels. + * Add these into the running sums, and simultaneously shift the + * next-line error sums left by 1 column. + */ + bnexterr = cur; + delta = cur * 2; + cur += delta; /* form error * 3 */ + errorptr[0] = (FSERROR) (bpreverr + cur); + cur += delta; /* form error * 5 */ + bpreverr = belowerr + cur; + belowerr = bnexterr; + cur += delta; /* form error * 7 */ + /* At this point cur contains the 7/16 error value to be propagated + * to the next pixel on the current line, and all the errors for the + * next line have been shifted over. We are therefore ready to move on. + */ + input_ptr += dirnc; /* advance input ptr to next column */ + output_ptr += dir; /* advance output ptr to next column */ + errorptr += dir; /* advance errorptr to current column */ + } + /* Post-loop cleanup: we must unload the final error value into the + * final fserrors[] entry. Note we need not unload belowerr because + * it is for the dummy column before or after the actual array. + */ + errorptr[0] = (FSERROR) bpreverr; /* unload prev err into array */ + } + cquantize->on_odd_row = (cquantize->on_odd_row ? FALSE : TRUE); + } +} + + +/* + * Allocate workspace for Floyd-Steinberg errors. + */ + +LOCAL(void) +alloc_fs_workspace (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + size_t arraysize; + int i; + + arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); + for (i = 0; i < cinfo->out_color_components; i++) { + cquantize->fserrors[i] = (FSERRPTR) + (*cinfo->mem->alloc_large)((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); + } +} + + +/* + * Initialize for one-pass color quantization. + */ + +METHODDEF(void) +start_pass_1_quant (j_decompress_ptr cinfo, boolean is_pre_scan) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + size_t arraysize; + int i; + + /* Install my colormap. */ + cinfo->colormap = cquantize->sv_colormap; + cinfo->actual_number_of_colors = cquantize->sv_actual; + + /* Initialize for desired dithering mode. */ + switch (cinfo->dither_mode) { + case JDITHER_NONE: + if (cinfo->out_color_components == 3) + cquantize->pub.color_quantize = color_quantize3; + else + cquantize->pub.color_quantize = color_quantize; + break; + case JDITHER_ORDERED: + if (cinfo->out_color_components == 3) + cquantize->pub.color_quantize = quantize3_ord_dither; + else + cquantize->pub.color_quantize = quantize_ord_dither; + cquantize->row_index = 0; /* initialize state for ordered dither */ + /* If user changed to ordered dither from another mode, + * we must recreate the color index table with padding. + * This will cost extra space, but probably isn't very likely. + */ + if (! cquantize->is_padded) + create_colorindex(cinfo); + /* Create ordered-dither tables if we didn't already. */ + if (cquantize->odither[0] == NULL) + create_odither_tables(cinfo); + break; + case JDITHER_FS: + cquantize->pub.color_quantize = quantize_fs_dither; + cquantize->on_odd_row = FALSE; /* initialize state for F-S dither */ + /* Allocate Floyd-Steinberg workspace if didn't already. */ + if (cquantize->fserrors[0] == NULL) + alloc_fs_workspace(cinfo); + /* Initialize the propagated errors to zero. */ + arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); + for (i = 0; i < cinfo->out_color_components; i++) + FMEMZERO((void FAR *) cquantize->fserrors[i], arraysize); + break; + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } +} + + +/* + * Finish up at the end of the pass. + */ + +METHODDEF(void) +finish_pass_1_quant (j_decompress_ptr cinfo) +{ + /* no work in 1-pass case */ +} + + +/* + * Switch to a new external colormap between output passes. + * Shouldn't get to this module! + */ + +METHODDEF(void) +new_color_map_1_quant (j_decompress_ptr cinfo) +{ + ERREXIT(cinfo, JERR_MODE_CHANGE); +} + + +/* + * Module initialization routine for 1-pass color quantization. + */ + +GLOBAL(void) +jinit_1pass_quantizer (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize; + + cquantize = (my_cquantize_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_cquantizer)); + cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; + cquantize->pub.start_pass = start_pass_1_quant; + cquantize->pub.finish_pass = finish_pass_1_quant; + cquantize->pub.new_color_map = new_color_map_1_quant; + cquantize->fserrors[0] = NULL; /* Flag FS workspace not allocated */ + cquantize->odither[0] = NULL; /* Also flag odither arrays not allocated */ + + /* Make sure my internal arrays won't overflow */ + if (cinfo->out_color_components > MAX_Q_COMPS) + ERREXIT1(cinfo, JERR_QUANT_COMPONENTS, MAX_Q_COMPS); + /* Make sure colormap indexes can be represented by JSAMPLEs */ + if (cinfo->desired_number_of_colors > (MAXJSAMPLE+1)) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXJSAMPLE+1); + + /* Create the colormap and color index table. */ + create_colormap(cinfo); + create_colorindex(cinfo); + + /* Allocate Floyd-Steinberg workspace now if requested. + * We do this now since it is FAR storage and may affect the memory + * manager's space calculations. If the user changes to FS dither + * mode in a later pass, we will allocate the space then, and will + * possibly overrun the max_memory_to_use setting. + */ + if (cinfo->dither_mode == JDITHER_FS) + alloc_fs_workspace(cinfo); +} + +#endif /* QUANT_1PASS_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/jquant2.c b/src/SDL2/external/jpeg-9/jquant2.c new file mode 100644 index 000000000..38fc2af7a --- /dev/null +++ b/src/SDL2/external/jpeg-9/jquant2.c @@ -0,0 +1,1311 @@ +/* + * jquant2.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains 2-pass color quantization (color mapping) routines. + * These routines provide selection of a custom color map for an image, + * followed by mapping of the image to that color map, with optional + * Floyd-Steinberg dithering. + * It is also possible to use just the second pass to map to an arbitrary + * externally-given color map. + * + * Note: ordered dithering is not supported, since there isn't any fast + * way to compute intercolor distances; it's unclear that ordered dither's + * fundamental assumptions even hold with an irregularly spaced color map. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +#ifdef QUANT_2PASS_SUPPORTED + + +/* + * This module implements the well-known Heckbert paradigm for color + * quantization. Most of the ideas used here can be traced back to + * Heckbert's seminal paper + * Heckbert, Paul. "Color Image Quantization for Frame Buffer Display", + * Proc. SIGGRAPH '82, Computer Graphics v.16 #3 (July 1982), pp 297-304. + * + * In the first pass over the image, we accumulate a histogram showing the + * usage count of each possible color. To keep the histogram to a reasonable + * size, we reduce the precision of the input; typical practice is to retain + * 5 or 6 bits per color, so that 8 or 4 different input values are counted + * in the same histogram cell. + * + * Next, the color-selection step begins with a box representing the whole + * color space, and repeatedly splits the "largest" remaining box until we + * have as many boxes as desired colors. Then the mean color in each + * remaining box becomes one of the possible output colors. + * + * The second pass over the image maps each input pixel to the closest output + * color (optionally after applying a Floyd-Steinberg dithering correction). + * This mapping is logically trivial, but making it go fast enough requires + * considerable care. + * + * Heckbert-style quantizers vary a good deal in their policies for choosing + * the "largest" box and deciding where to cut it. The particular policies + * used here have proved out well in experimental comparisons, but better ones + * may yet be found. + * + * In earlier versions of the IJG code, this module quantized in YCbCr color + * space, processing the raw upsampled data without a color conversion step. + * This allowed the color conversion math to be done only once per colormap + * entry, not once per pixel. However, that optimization precluded other + * useful optimizations (such as merging color conversion with upsampling) + * and it also interfered with desired capabilities such as quantizing to an + * externally-supplied colormap. We have therefore abandoned that approach. + * The present code works in the post-conversion color space, typically RGB. + * + * To improve the visual quality of the results, we actually work in scaled + * RGB space, giving G distances more weight than R, and R in turn more than + * B. To do everything in integer math, we must use integer scale factors. + * The 2/3/1 scale factors used here correspond loosely to the relative + * weights of the colors in the NTSC grayscale equation. + * If you want to use this code to quantize a non-RGB color space, you'll + * probably need to change these scale factors. + */ + +#define R_SCALE 2 /* scale R distances by this much */ +#define G_SCALE 3 /* scale G distances by this much */ +#define B_SCALE 1 /* and B by this much */ + +/* Relabel R/G/B as components 0/1/2, respecting the RGB ordering defined + * in jmorecfg.h. As the code stands, it will do the right thing for R,G,B + * and B,G,R orders. If you define some other weird order in jmorecfg.h, + * you'll get compile errors until you extend this logic. In that case + * you'll probably want to tweak the histogram sizes too. + */ + +#if RGB_RED == 0 +#define C0_SCALE R_SCALE +#endif +#if RGB_BLUE == 0 +#define C0_SCALE B_SCALE +#endif +#if RGB_GREEN == 1 +#define C1_SCALE G_SCALE +#endif +#if RGB_RED == 2 +#define C2_SCALE R_SCALE +#endif +#if RGB_BLUE == 2 +#define C2_SCALE B_SCALE +#endif + + +/* + * First we have the histogram data structure and routines for creating it. + * + * The number of bits of precision can be adjusted by changing these symbols. + * We recommend keeping 6 bits for G and 5 each for R and B. + * If you have plenty of memory and cycles, 6 bits all around gives marginally + * better results; if you are short of memory, 5 bits all around will save + * some space but degrade the results. + * To maintain a fully accurate histogram, we'd need to allocate a "long" + * (preferably unsigned long) for each cell. In practice this is overkill; + * we can get by with 16 bits per cell. Few of the cell counts will overflow, + * and clamping those that do overflow to the maximum value will give close- + * enough results. This reduces the recommended histogram size from 256Kb + * to 128Kb, which is a useful savings on PC-class machines. + * (In the second pass the histogram space is re-used for pixel mapping data; + * in that capacity, each cell must be able to store zero to the number of + * desired colors. 16 bits/cell is plenty for that too.) + * Since the JPEG code is intended to run in small memory model on 80x86 + * machines, we can't just allocate the histogram in one chunk. Instead + * of a true 3-D array, we use a row of pointers to 2-D arrays. Each + * pointer corresponds to a C0 value (typically 2^5 = 32 pointers) and + * each 2-D array has 2^6*2^5 = 2048 or 2^6*2^6 = 4096 entries. Note that + * on 80x86 machines, the pointer row is in near memory but the actual + * arrays are in far memory (same arrangement as we use for image arrays). + */ + +#define MAXNUMCOLORS (MAXJSAMPLE+1) /* maximum size of colormap */ + +/* These will do the right thing for either R,G,B or B,G,R color order, + * but you may not like the results for other color orders. + */ +#define HIST_C0_BITS 5 /* bits of precision in R/B histogram */ +#define HIST_C1_BITS 6 /* bits of precision in G histogram */ +#define HIST_C2_BITS 5 /* bits of precision in B/R histogram */ + +/* Number of elements along histogram axes. */ +#define HIST_C0_ELEMS (1<cquantize; + register JSAMPROW ptr; + register histptr histp; + register hist3d histogram = cquantize->histogram; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + ptr = input_buf[row]; + for (col = width; col > 0; col--) { + /* get pixel value and index into the histogram */ + histp = & histogram[GETJSAMPLE(ptr[0]) >> C0_SHIFT] + [GETJSAMPLE(ptr[1]) >> C1_SHIFT] + [GETJSAMPLE(ptr[2]) >> C2_SHIFT]; + /* increment, check for overflow and undo increment if so. */ + if (++(*histp) <= 0) + (*histp)--; + ptr += 3; + } + } +} + + +/* + * Next we have the really interesting routines: selection of a colormap + * given the completed histogram. + * These routines work with a list of "boxes", each representing a rectangular + * subset of the input color space (to histogram precision). + */ + +typedef struct { + /* The bounds of the box (inclusive); expressed as histogram indexes */ + int c0min, c0max; + int c1min, c1max; + int c2min, c2max; + /* The volume (actually 2-norm) of the box */ + INT32 volume; + /* The number of nonzero histogram cells within this box */ + long colorcount; +} box; + +typedef box * boxptr; + + +LOCAL(boxptr) +find_biggest_color_pop (boxptr boxlist, int numboxes) +/* Find the splittable box with the largest color population */ +/* Returns NULL if no splittable boxes remain */ +{ + register boxptr boxp; + register int i; + register long maxc = 0; + boxptr which = NULL; + + for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { + if (boxp->colorcount > maxc && boxp->volume > 0) { + which = boxp; + maxc = boxp->colorcount; + } + } + return which; +} + + +LOCAL(boxptr) +find_biggest_volume (boxptr boxlist, int numboxes) +/* Find the splittable box with the largest (scaled) volume */ +/* Returns NULL if no splittable boxes remain */ +{ + register boxptr boxp; + register int i; + register INT32 maxv = 0; + boxptr which = NULL; + + for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { + if (boxp->volume > maxv) { + which = boxp; + maxv = boxp->volume; + } + } + return which; +} + + +LOCAL(void) +update_box (j_decompress_ptr cinfo, boxptr boxp) +/* Shrink the min/max bounds of a box to enclose only nonzero elements, */ +/* and recompute its volume and population */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + histptr histp; + int c0,c1,c2; + int c0min,c0max,c1min,c1max,c2min,c2max; + INT32 dist0,dist1,dist2; + long ccount; + + c0min = boxp->c0min; c0max = boxp->c0max; + c1min = boxp->c1min; c1max = boxp->c1max; + c2min = boxp->c2min; c2max = boxp->c2max; + + if (c0max > c0min) + for (c0 = c0min; c0 <= c0max; c0++) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c0min = c0min = c0; + goto have_c0min; + } + } + have_c0min: + if (c0max > c0min) + for (c0 = c0max; c0 >= c0min; c0--) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c0max = c0max = c0; + goto have_c0max; + } + } + have_c0max: + if (c1max > c1min) + for (c1 = c1min; c1 <= c1max; c1++) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c1min = c1min = c1; + goto have_c1min; + } + } + have_c1min: + if (c1max > c1min) + for (c1 = c1max; c1 >= c1min; c1--) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c1max = c1max = c1; + goto have_c1max; + } + } + have_c1max: + if (c2max > c2min) + for (c2 = c2min; c2 <= c2max; c2++) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1min][c2]; + for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) + if (*histp != 0) { + boxp->c2min = c2min = c2; + goto have_c2min; + } + } + have_c2min: + if (c2max > c2min) + for (c2 = c2max; c2 >= c2min; c2--) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1min][c2]; + for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) + if (*histp != 0) { + boxp->c2max = c2max = c2; + goto have_c2max; + } + } + have_c2max: + + /* Update box volume. + * We use 2-norm rather than real volume here; this biases the method + * against making long narrow boxes, and it has the side benefit that + * a box is splittable iff norm > 0. + * Since the differences are expressed in histogram-cell units, + * we have to shift back to JSAMPLE units to get consistent distances; + * after which, we scale according to the selected distance scale factors. + */ + dist0 = ((c0max - c0min) << C0_SHIFT) * C0_SCALE; + dist1 = ((c1max - c1min) << C1_SHIFT) * C1_SCALE; + dist2 = ((c2max - c2min) << C2_SHIFT) * C2_SCALE; + boxp->volume = dist0*dist0 + dist1*dist1 + dist2*dist2; + + /* Now scan remaining volume of box and compute population */ + ccount = 0; + for (c0 = c0min; c0 <= c0max; c0++) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++, histp++) + if (*histp != 0) { + ccount++; + } + } + boxp->colorcount = ccount; +} + + +LOCAL(int) +median_cut (j_decompress_ptr cinfo, boxptr boxlist, int numboxes, + int desired_colors) +/* Repeatedly select and split the largest box until we have enough boxes */ +{ + int n,lb; + int c0,c1,c2,cmax; + register boxptr b1,b2; + + while (numboxes < desired_colors) { + /* Select box to split. + * Current algorithm: by population for first half, then by volume. + */ + if (numboxes*2 <= desired_colors) { + b1 = find_biggest_color_pop(boxlist, numboxes); + } else { + b1 = find_biggest_volume(boxlist, numboxes); + } + if (b1 == NULL) /* no splittable boxes left! */ + break; + b2 = &boxlist[numboxes]; /* where new box will go */ + /* Copy the color bounds to the new box. */ + b2->c0max = b1->c0max; b2->c1max = b1->c1max; b2->c2max = b1->c2max; + b2->c0min = b1->c0min; b2->c1min = b1->c1min; b2->c2min = b1->c2min; + /* Choose which axis to split the box on. + * Current algorithm: longest scaled axis. + * See notes in update_box about scaling distances. + */ + c0 = ((b1->c0max - b1->c0min) << C0_SHIFT) * C0_SCALE; + c1 = ((b1->c1max - b1->c1min) << C1_SHIFT) * C1_SCALE; + c2 = ((b1->c2max - b1->c2min) << C2_SHIFT) * C2_SCALE; + /* We want to break any ties in favor of green, then red, blue last. + * This code does the right thing for R,G,B or B,G,R color orders only. + */ +#if RGB_RED == 0 + cmax = c1; n = 1; + if (c0 > cmax) { cmax = c0; n = 0; } + if (c2 > cmax) { n = 2; } +#else + cmax = c1; n = 1; + if (c2 > cmax) { cmax = c2; n = 2; } + if (c0 > cmax) { n = 0; } +#endif + /* Choose split point along selected axis, and update box bounds. + * Current algorithm: split at halfway point. + * (Since the box has been shrunk to minimum volume, + * any split will produce two nonempty subboxes.) + * Note that lb value is max for lower box, so must be < old max. + */ + switch (n) { + case 0: + lb = (b1->c0max + b1->c0min) / 2; + b1->c0max = lb; + b2->c0min = lb+1; + break; + case 1: + lb = (b1->c1max + b1->c1min) / 2; + b1->c1max = lb; + b2->c1min = lb+1; + break; + case 2: + lb = (b1->c2max + b1->c2min) / 2; + b1->c2max = lb; + b2->c2min = lb+1; + break; + } + /* Update stats for boxes */ + update_box(cinfo, b1); + update_box(cinfo, b2); + numboxes++; + } + return numboxes; +} + + +LOCAL(void) +compute_color (j_decompress_ptr cinfo, boxptr boxp, int icolor) +/* Compute representative color for a box, put it in colormap[icolor] */ +{ + /* Current algorithm: mean weighted by pixels (not colors) */ + /* Note it is important to get the rounding correct! */ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + histptr histp; + int c0,c1,c2; + int c0min,c0max,c1min,c1max,c2min,c2max; + long count; + long total = 0; + long c0total = 0; + long c1total = 0; + long c2total = 0; + + c0min = boxp->c0min; c0max = boxp->c0max; + c1min = boxp->c1min; c1max = boxp->c1max; + c2min = boxp->c2min; c2max = boxp->c2max; + + for (c0 = c0min; c0 <= c0max; c0++) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) { + if ((count = *histp++) != 0) { + total += count; + c0total += ((c0 << C0_SHIFT) + ((1<>1)) * count; + c1total += ((c1 << C1_SHIFT) + ((1<>1)) * count; + c2total += ((c2 << C2_SHIFT) + ((1<>1)) * count; + } + } + } + + cinfo->colormap[0][icolor] = (JSAMPLE) ((c0total + (total>>1)) / total); + cinfo->colormap[1][icolor] = (JSAMPLE) ((c1total + (total>>1)) / total); + cinfo->colormap[2][icolor] = (JSAMPLE) ((c2total + (total>>1)) / total); +} + + +LOCAL(void) +select_colors (j_decompress_ptr cinfo, int desired_colors) +/* Master routine for color selection */ +{ + boxptr boxlist; + int numboxes; + int i; + + /* Allocate workspace for box list */ + boxlist = (boxptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, desired_colors * SIZEOF(box)); + /* Initialize one box containing whole space */ + numboxes = 1; + boxlist[0].c0min = 0; + boxlist[0].c0max = MAXJSAMPLE >> C0_SHIFT; + boxlist[0].c1min = 0; + boxlist[0].c1max = MAXJSAMPLE >> C1_SHIFT; + boxlist[0].c2min = 0; + boxlist[0].c2max = MAXJSAMPLE >> C2_SHIFT; + /* Shrink it to actually-used volume and set its statistics */ + update_box(cinfo, & boxlist[0]); + /* Perform median-cut to produce final box list */ + numboxes = median_cut(cinfo, boxlist, numboxes, desired_colors); + /* Compute the representative color for each box, fill colormap */ + for (i = 0; i < numboxes; i++) + compute_color(cinfo, & boxlist[i], i); + cinfo->actual_number_of_colors = numboxes; + TRACEMS1(cinfo, 1, JTRC_QUANT_SELECTED, numboxes); +} + + +/* + * These routines are concerned with the time-critical task of mapping input + * colors to the nearest color in the selected colormap. + * + * We re-use the histogram space as an "inverse color map", essentially a + * cache for the results of nearest-color searches. All colors within a + * histogram cell will be mapped to the same colormap entry, namely the one + * closest to the cell's center. This may not be quite the closest entry to + * the actual input color, but it's almost as good. A zero in the cache + * indicates we haven't found the nearest color for that cell yet; the array + * is cleared to zeroes before starting the mapping pass. When we find the + * nearest color for a cell, its colormap index plus one is recorded in the + * cache for future use. The pass2 scanning routines call fill_inverse_cmap + * when they need to use an unfilled entry in the cache. + * + * Our method of efficiently finding nearest colors is based on the "locally + * sorted search" idea described by Heckbert and on the incremental distance + * calculation described by Spencer W. Thomas in chapter III.1 of Graphics + * Gems II (James Arvo, ed. Academic Press, 1991). Thomas points out that + * the distances from a given colormap entry to each cell of the histogram can + * be computed quickly using an incremental method: the differences between + * distances to adjacent cells themselves differ by a constant. This allows a + * fairly fast implementation of the "brute force" approach of computing the + * distance from every colormap entry to every histogram cell. Unfortunately, + * it needs a work array to hold the best-distance-so-far for each histogram + * cell (because the inner loop has to be over cells, not colormap entries). + * The work array elements have to be INT32s, so the work array would need + * 256Kb at our recommended precision. This is not feasible in DOS machines. + * + * To get around these problems, we apply Thomas' method to compute the + * nearest colors for only the cells within a small subbox of the histogram. + * The work array need be only as big as the subbox, so the memory usage + * problem is solved. Furthermore, we need not fill subboxes that are never + * referenced in pass2; many images use only part of the color gamut, so a + * fair amount of work is saved. An additional advantage of this + * approach is that we can apply Heckbert's locality criterion to quickly + * eliminate colormap entries that are far away from the subbox; typically + * three-fourths of the colormap entries are rejected by Heckbert's criterion, + * and we need not compute their distances to individual cells in the subbox. + * The speed of this approach is heavily influenced by the subbox size: too + * small means too much overhead, too big loses because Heckbert's criterion + * can't eliminate as many colormap entries. Empirically the best subbox + * size seems to be about 1/512th of the histogram (1/8th in each direction). + * + * Thomas' article also describes a refined method which is asymptotically + * faster than the brute-force method, but it is also far more complex and + * cannot efficiently be applied to small subboxes. It is therefore not + * useful for programs intended to be portable to DOS machines. On machines + * with plenty of memory, filling the whole histogram in one shot with Thomas' + * refined method might be faster than the present code --- but then again, + * it might not be any faster, and it's certainly more complicated. + */ + + +/* log2(histogram cells in update box) for each axis; this can be adjusted */ +#define BOX_C0_LOG (HIST_C0_BITS-3) +#define BOX_C1_LOG (HIST_C1_BITS-3) +#define BOX_C2_LOG (HIST_C2_BITS-3) + +#define BOX_C0_ELEMS (1<actual_number_of_colors; + int maxc0, maxc1, maxc2; + int centerc0, centerc1, centerc2; + int i, x, ncolors; + INT32 minmaxdist, min_dist, max_dist, tdist; + INT32 mindist[MAXNUMCOLORS]; /* min distance to colormap entry i */ + + /* Compute true coordinates of update box's upper corner and center. + * Actually we compute the coordinates of the center of the upper-corner + * histogram cell, which are the upper bounds of the volume we care about. + * Note that since ">>" rounds down, the "center" values may be closer to + * min than to max; hence comparisons to them must be "<=", not "<". + */ + maxc0 = minc0 + ((1 << BOX_C0_SHIFT) - (1 << C0_SHIFT)); + centerc0 = (minc0 + maxc0) >> 1; + maxc1 = minc1 + ((1 << BOX_C1_SHIFT) - (1 << C1_SHIFT)); + centerc1 = (minc1 + maxc1) >> 1; + maxc2 = minc2 + ((1 << BOX_C2_SHIFT) - (1 << C2_SHIFT)); + centerc2 = (minc2 + maxc2) >> 1; + + /* For each color in colormap, find: + * 1. its minimum squared-distance to any point in the update box + * (zero if color is within update box); + * 2. its maximum squared-distance to any point in the update box. + * Both of these can be found by considering only the corners of the box. + * We save the minimum distance for each color in mindist[]; + * only the smallest maximum distance is of interest. + */ + minmaxdist = 0x7FFFFFFFL; + + for (i = 0; i < numcolors; i++) { + /* We compute the squared-c0-distance term, then add in the other two. */ + x = GETJSAMPLE(cinfo->colormap[0][i]); + if (x < minc0) { + tdist = (x - minc0) * C0_SCALE; + min_dist = tdist*tdist; + tdist = (x - maxc0) * C0_SCALE; + max_dist = tdist*tdist; + } else if (x > maxc0) { + tdist = (x - maxc0) * C0_SCALE; + min_dist = tdist*tdist; + tdist = (x - minc0) * C0_SCALE; + max_dist = tdist*tdist; + } else { + /* within cell range so no contribution to min_dist */ + min_dist = 0; + if (x <= centerc0) { + tdist = (x - maxc0) * C0_SCALE; + max_dist = tdist*tdist; + } else { + tdist = (x - minc0) * C0_SCALE; + max_dist = tdist*tdist; + } + } + + x = GETJSAMPLE(cinfo->colormap[1][i]); + if (x < minc1) { + tdist = (x - minc1) * C1_SCALE; + min_dist += tdist*tdist; + tdist = (x - maxc1) * C1_SCALE; + max_dist += tdist*tdist; + } else if (x > maxc1) { + tdist = (x - maxc1) * C1_SCALE; + min_dist += tdist*tdist; + tdist = (x - minc1) * C1_SCALE; + max_dist += tdist*tdist; + } else { + /* within cell range so no contribution to min_dist */ + if (x <= centerc1) { + tdist = (x - maxc1) * C1_SCALE; + max_dist += tdist*tdist; + } else { + tdist = (x - minc1) * C1_SCALE; + max_dist += tdist*tdist; + } + } + + x = GETJSAMPLE(cinfo->colormap[2][i]); + if (x < minc2) { + tdist = (x - minc2) * C2_SCALE; + min_dist += tdist*tdist; + tdist = (x - maxc2) * C2_SCALE; + max_dist += tdist*tdist; + } else if (x > maxc2) { + tdist = (x - maxc2) * C2_SCALE; + min_dist += tdist*tdist; + tdist = (x - minc2) * C2_SCALE; + max_dist += tdist*tdist; + } else { + /* within cell range so no contribution to min_dist */ + if (x <= centerc2) { + tdist = (x - maxc2) * C2_SCALE; + max_dist += tdist*tdist; + } else { + tdist = (x - minc2) * C2_SCALE; + max_dist += tdist*tdist; + } + } + + mindist[i] = min_dist; /* save away the results */ + if (max_dist < minmaxdist) + minmaxdist = max_dist; + } + + /* Now we know that no cell in the update box is more than minmaxdist + * away from some colormap entry. Therefore, only colors that are + * within minmaxdist of some part of the box need be considered. + */ + ncolors = 0; + for (i = 0; i < numcolors; i++) { + if (mindist[i] <= minmaxdist) + colorlist[ncolors++] = (JSAMPLE) i; + } + return ncolors; +} + + +LOCAL(void) +find_best_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2, + int numcolors, JSAMPLE colorlist[], JSAMPLE bestcolor[]) +/* Find the closest colormap entry for each cell in the update box, + * given the list of candidate colors prepared by find_nearby_colors. + * Return the indexes of the closest entries in the bestcolor[] array. + * This routine uses Thomas' incremental distance calculation method to + * find the distance from a colormap entry to successive cells in the box. + */ +{ + int ic0, ic1, ic2; + int i, icolor; + register INT32 * bptr; /* pointer into bestdist[] array */ + JSAMPLE * cptr; /* pointer into bestcolor[] array */ + INT32 dist0, dist1; /* initial distance values */ + register INT32 dist2; /* current distance in inner loop */ + INT32 xx0, xx1; /* distance increments */ + register INT32 xx2; + INT32 inc0, inc1, inc2; /* initial values for increments */ + /* This array holds the distance to the nearest-so-far color for each cell */ + INT32 bestdist[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; + + /* Initialize best-distance for each cell of the update box */ + bptr = bestdist; + for (i = BOX_C0_ELEMS*BOX_C1_ELEMS*BOX_C2_ELEMS-1; i >= 0; i--) + *bptr++ = 0x7FFFFFFFL; + + /* For each color selected by find_nearby_colors, + * compute its distance to the center of each cell in the box. + * If that's less than best-so-far, update best distance and color number. + */ + + /* Nominal steps between cell centers ("x" in Thomas article) */ +#define STEP_C0 ((1 << C0_SHIFT) * C0_SCALE) +#define STEP_C1 ((1 << C1_SHIFT) * C1_SCALE) +#define STEP_C2 ((1 << C2_SHIFT) * C2_SCALE) + + for (i = 0; i < numcolors; i++) { + icolor = GETJSAMPLE(colorlist[i]); + /* Compute (square of) distance from minc0/c1/c2 to this color */ + inc0 = (minc0 - GETJSAMPLE(cinfo->colormap[0][icolor])) * C0_SCALE; + dist0 = inc0*inc0; + inc1 = (minc1 - GETJSAMPLE(cinfo->colormap[1][icolor])) * C1_SCALE; + dist0 += inc1*inc1; + inc2 = (minc2 - GETJSAMPLE(cinfo->colormap[2][icolor])) * C2_SCALE; + dist0 += inc2*inc2; + /* Form the initial difference increments */ + inc0 = inc0 * (2 * STEP_C0) + STEP_C0 * STEP_C0; + inc1 = inc1 * (2 * STEP_C1) + STEP_C1 * STEP_C1; + inc2 = inc2 * (2 * STEP_C2) + STEP_C2 * STEP_C2; + /* Now loop over all cells in box, updating distance per Thomas method */ + bptr = bestdist; + cptr = bestcolor; + xx0 = inc0; + for (ic0 = BOX_C0_ELEMS-1; ic0 >= 0; ic0--) { + dist1 = dist0; + xx1 = inc1; + for (ic1 = BOX_C1_ELEMS-1; ic1 >= 0; ic1--) { + dist2 = dist1; + xx2 = inc2; + for (ic2 = BOX_C2_ELEMS-1; ic2 >= 0; ic2--) { + if (dist2 < *bptr) { + *bptr = dist2; + *cptr = (JSAMPLE) icolor; + } + dist2 += xx2; + xx2 += 2 * STEP_C2 * STEP_C2; + bptr++; + cptr++; + } + dist1 += xx1; + xx1 += 2 * STEP_C1 * STEP_C1; + } + dist0 += xx0; + xx0 += 2 * STEP_C0 * STEP_C0; + } + } +} + + +LOCAL(void) +fill_inverse_cmap (j_decompress_ptr cinfo, int c0, int c1, int c2) +/* Fill the inverse-colormap entries in the update box that contains */ +/* histogram cell c0/c1/c2. (Only that one cell MUST be filled, but */ +/* we can fill as many others as we wish.) */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + int minc0, minc1, minc2; /* lower left corner of update box */ + int ic0, ic1, ic2; + register JSAMPLE * cptr; /* pointer into bestcolor[] array */ + register histptr cachep; /* pointer into main cache array */ + /* This array lists the candidate colormap indexes. */ + JSAMPLE colorlist[MAXNUMCOLORS]; + int numcolors; /* number of candidate colors */ + /* This array holds the actually closest colormap index for each cell. */ + JSAMPLE bestcolor[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; + + /* Convert cell coordinates to update box ID */ + c0 >>= BOX_C0_LOG; + c1 >>= BOX_C1_LOG; + c2 >>= BOX_C2_LOG; + + /* Compute true coordinates of update box's origin corner. + * Actually we compute the coordinates of the center of the corner + * histogram cell, which are the lower bounds of the volume we care about. + */ + minc0 = (c0 << BOX_C0_SHIFT) + ((1 << C0_SHIFT) >> 1); + minc1 = (c1 << BOX_C1_SHIFT) + ((1 << C1_SHIFT) >> 1); + minc2 = (c2 << BOX_C2_SHIFT) + ((1 << C2_SHIFT) >> 1); + + /* Determine which colormap entries are close enough to be candidates + * for the nearest entry to some cell in the update box. + */ + numcolors = find_nearby_colors(cinfo, minc0, minc1, minc2, colorlist); + + /* Determine the actually nearest colors. */ + find_best_colors(cinfo, minc0, minc1, minc2, numcolors, colorlist, + bestcolor); + + /* Save the best color numbers (plus 1) in the main cache array */ + c0 <<= BOX_C0_LOG; /* convert ID back to base cell indexes */ + c1 <<= BOX_C1_LOG; + c2 <<= BOX_C2_LOG; + cptr = bestcolor; + for (ic0 = 0; ic0 < BOX_C0_ELEMS; ic0++) { + for (ic1 = 0; ic1 < BOX_C1_ELEMS; ic1++) { + cachep = & histogram[c0+ic0][c1+ic1][c2]; + for (ic2 = 0; ic2 < BOX_C2_ELEMS; ic2++) { + *cachep++ = (histcell) (GETJSAMPLE(*cptr++) + 1); + } + } + } +} + + +/* + * Map some rows of pixels to the output colormapped representation. + */ + +METHODDEF(void) +pass2_no_dither (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) +/* This version performs no dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + register JSAMPROW inptr, outptr; + register histptr cachep; + register int c0, c1, c2; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + inptr = input_buf[row]; + outptr = output_buf[row]; + for (col = width; col > 0; col--) { + /* get pixel value and index into the cache */ + c0 = GETJSAMPLE(*inptr++) >> C0_SHIFT; + c1 = GETJSAMPLE(*inptr++) >> C1_SHIFT; + c2 = GETJSAMPLE(*inptr++) >> C2_SHIFT; + cachep = & histogram[c0][c1][c2]; + /* If we have not seen this color before, find nearest colormap entry */ + /* and update the cache */ + if (*cachep == 0) + fill_inverse_cmap(cinfo, c0,c1,c2); + /* Now emit the colormap index for this cell */ + *outptr++ = (JSAMPLE) (*cachep - 1); + } + } +} + + +METHODDEF(void) +pass2_fs_dither (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) +/* This version performs Floyd-Steinberg dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + register LOCFSERROR cur0, cur1, cur2; /* current error or pixel value */ + LOCFSERROR belowerr0, belowerr1, belowerr2; /* error for pixel below cur */ + LOCFSERROR bpreverr0, bpreverr1, bpreverr2; /* error for below/prev col */ + register FSERRPTR errorptr; /* => fserrors[] at column before current */ + JSAMPROW inptr; /* => current input pixel */ + JSAMPROW outptr; /* => current output pixel */ + histptr cachep; + int dir; /* +1 or -1 depending on direction */ + int dir3; /* 3*dir, for advancing inptr & errorptr */ + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + JSAMPLE *range_limit = cinfo->sample_range_limit; + int *error_limit = cquantize->error_limiter; + JSAMPROW colormap0 = cinfo->colormap[0]; + JSAMPROW colormap1 = cinfo->colormap[1]; + JSAMPROW colormap2 = cinfo->colormap[2]; + SHIFT_TEMPS + + for (row = 0; row < num_rows; row++) { + inptr = input_buf[row]; + outptr = output_buf[row]; + if (cquantize->on_odd_row) { + /* work right to left in this row */ + inptr += (width-1) * 3; /* so point to rightmost pixel */ + outptr += width-1; + dir = -1; + dir3 = -3; + errorptr = cquantize->fserrors + (width+1)*3; /* => entry after last column */ + cquantize->on_odd_row = FALSE; /* flip for next time */ + } else { + /* work left to right in this row */ + dir = 1; + dir3 = 3; + errorptr = cquantize->fserrors; /* => entry before first real column */ + cquantize->on_odd_row = TRUE; /* flip for next time */ + } + /* Preset error values: no error propagated to first pixel from left */ + cur0 = cur1 = cur2 = 0; + /* and no error propagated to row below yet */ + belowerr0 = belowerr1 = belowerr2 = 0; + bpreverr0 = bpreverr1 = bpreverr2 = 0; + + for (col = width; col > 0; col--) { + /* curN holds the error propagated from the previous pixel on the + * current line. Add the error propagated from the previous line + * to form the complete error correction term for this pixel, and + * round the error term (which is expressed * 16) to an integer. + * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct + * for either sign of the error value. + * Note: errorptr points to *previous* column's array entry. + */ + cur0 = RIGHT_SHIFT(cur0 + errorptr[dir3+0] + 8, 4); + cur1 = RIGHT_SHIFT(cur1 + errorptr[dir3+1] + 8, 4); + cur2 = RIGHT_SHIFT(cur2 + errorptr[dir3+2] + 8, 4); + /* Limit the error using transfer function set by init_error_limit. + * See comments with init_error_limit for rationale. + */ + cur0 = error_limit[cur0]; + cur1 = error_limit[cur1]; + cur2 = error_limit[cur2]; + /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. + * The maximum error is +- MAXJSAMPLE (or less with error limiting); + * this sets the required size of the range_limit array. + */ + cur0 += GETJSAMPLE(inptr[0]); + cur1 += GETJSAMPLE(inptr[1]); + cur2 += GETJSAMPLE(inptr[2]); + cur0 = GETJSAMPLE(range_limit[cur0]); + cur1 = GETJSAMPLE(range_limit[cur1]); + cur2 = GETJSAMPLE(range_limit[cur2]); + /* Index into the cache with adjusted pixel value */ + cachep = & histogram[cur0>>C0_SHIFT][cur1>>C1_SHIFT][cur2>>C2_SHIFT]; + /* If we have not seen this color before, find nearest colormap */ + /* entry and update the cache */ + if (*cachep == 0) + fill_inverse_cmap(cinfo, cur0>>C0_SHIFT,cur1>>C1_SHIFT,cur2>>C2_SHIFT); + /* Now emit the colormap index for this cell */ + { register int pixcode = *cachep - 1; + *outptr = (JSAMPLE) pixcode; + /* Compute representation error for this pixel */ + cur0 -= GETJSAMPLE(colormap0[pixcode]); + cur1 -= GETJSAMPLE(colormap1[pixcode]); + cur2 -= GETJSAMPLE(colormap2[pixcode]); + } + /* Compute error fractions to be propagated to adjacent pixels. + * Add these into the running sums, and simultaneously shift the + * next-line error sums left by 1 column. + */ + { register LOCFSERROR bnexterr, delta; + + bnexterr = cur0; /* Process component 0 */ + delta = cur0 * 2; + cur0 += delta; /* form error * 3 */ + errorptr[0] = (FSERROR) (bpreverr0 + cur0); + cur0 += delta; /* form error * 5 */ + bpreverr0 = belowerr0 + cur0; + belowerr0 = bnexterr; + cur0 += delta; /* form error * 7 */ + bnexterr = cur1; /* Process component 1 */ + delta = cur1 * 2; + cur1 += delta; /* form error * 3 */ + errorptr[1] = (FSERROR) (bpreverr1 + cur1); + cur1 += delta; /* form error * 5 */ + bpreverr1 = belowerr1 + cur1; + belowerr1 = bnexterr; + cur1 += delta; /* form error * 7 */ + bnexterr = cur2; /* Process component 2 */ + delta = cur2 * 2; + cur2 += delta; /* form error * 3 */ + errorptr[2] = (FSERROR) (bpreverr2 + cur2); + cur2 += delta; /* form error * 5 */ + bpreverr2 = belowerr2 + cur2; + belowerr2 = bnexterr; + cur2 += delta; /* form error * 7 */ + } + /* At this point curN contains the 7/16 error value to be propagated + * to the next pixel on the current line, and all the errors for the + * next line have been shifted over. We are therefore ready to move on. + */ + inptr += dir3; /* Advance pixel pointers to next column */ + outptr += dir; + errorptr += dir3; /* advance errorptr to current column */ + } + /* Post-loop cleanup: we must unload the final error values into the + * final fserrors[] entry. Note we need not unload belowerrN because + * it is for the dummy column before or after the actual array. + */ + errorptr[0] = (FSERROR) bpreverr0; /* unload prev errs into array */ + errorptr[1] = (FSERROR) bpreverr1; + errorptr[2] = (FSERROR) bpreverr2; + } +} + + +/* + * Initialize the error-limiting transfer function (lookup table). + * The raw F-S error computation can potentially compute error values of up to + * +- MAXJSAMPLE. But we want the maximum correction applied to a pixel to be + * much less, otherwise obviously wrong pixels will be created. (Typical + * effects include weird fringes at color-area boundaries, isolated bright + * pixels in a dark area, etc.) The standard advice for avoiding this problem + * is to ensure that the "corners" of the color cube are allocated as output + * colors; then repeated errors in the same direction cannot cause cascading + * error buildup. However, that only prevents the error from getting + * completely out of hand; Aaron Giles reports that error limiting improves + * the results even with corner colors allocated. + * A simple clamping of the error values to about +- MAXJSAMPLE/8 works pretty + * well, but the smoother transfer function used below is even better. Thanks + * to Aaron Giles for this idea. + */ + +LOCAL(void) +init_error_limit (j_decompress_ptr cinfo) +/* Allocate and fill in the error_limiter table */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + int * table; + int in, out; + + table = (int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE*2+1) * SIZEOF(int)); + table += MAXJSAMPLE; /* so can index -MAXJSAMPLE .. +MAXJSAMPLE */ + cquantize->error_limiter = table; + +#define STEPSIZE ((MAXJSAMPLE+1)/16) + /* Map errors 1:1 up to +- MAXJSAMPLE/16 */ + out = 0; + for (in = 0; in < STEPSIZE; in++, out++) { + table[in] = out; table[-in] = -out; + } + /* Map errors 1:2 up to +- 3*MAXJSAMPLE/16 */ + for (; in < STEPSIZE*3; in++, out += (in&1) ? 0 : 1) { + table[in] = out; table[-in] = -out; + } + /* Clamp the rest to final out value (which is (MAXJSAMPLE+1)/8) */ + for (; in <= MAXJSAMPLE; in++) { + table[in] = out; table[-in] = -out; + } +#undef STEPSIZE +} + + +/* + * Finish up at the end of each pass. + */ + +METHODDEF(void) +finish_pass1 (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + + /* Select the representative colors and fill in cinfo->colormap */ + cinfo->colormap = cquantize->sv_colormap; + select_colors(cinfo, cquantize->desired); + /* Force next pass to zero the color index table */ + cquantize->needs_zeroed = TRUE; +} + + +METHODDEF(void) +finish_pass2 (j_decompress_ptr cinfo) +{ + /* no work */ +} + + +/* + * Initialize for each processing pass. + */ + +METHODDEF(void) +start_pass_2_quant (j_decompress_ptr cinfo, boolean is_pre_scan) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + int i; + + /* Only F-S dithering or no dithering is supported. */ + /* If user asks for ordered dither, give him F-S. */ + if (cinfo->dither_mode != JDITHER_NONE) + cinfo->dither_mode = JDITHER_FS; + + if (is_pre_scan) { + /* Set up method pointers */ + cquantize->pub.color_quantize = prescan_quantize; + cquantize->pub.finish_pass = finish_pass1; + cquantize->needs_zeroed = TRUE; /* Always zero histogram */ + } else { + /* Set up method pointers */ + if (cinfo->dither_mode == JDITHER_FS) + cquantize->pub.color_quantize = pass2_fs_dither; + else + cquantize->pub.color_quantize = pass2_no_dither; + cquantize->pub.finish_pass = finish_pass2; + + /* Make sure color count is acceptable */ + i = cinfo->actual_number_of_colors; + if (i < 1) + ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 1); + if (i > MAXNUMCOLORS) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); + + if (cinfo->dither_mode == JDITHER_FS) { + size_t arraysize = (size_t) ((cinfo->output_width + 2) * + (3 * SIZEOF(FSERROR))); + /* Allocate Floyd-Steinberg workspace if we didn't already. */ + if (cquantize->fserrors == NULL) + cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); + /* Initialize the propagated errors to zero. */ + FMEMZERO((void FAR *) cquantize->fserrors, arraysize); + /* Make the error-limit table if we didn't already. */ + if (cquantize->error_limiter == NULL) + init_error_limit(cinfo); + cquantize->on_odd_row = FALSE; + } + + } + /* Zero the histogram or inverse color map, if necessary */ + if (cquantize->needs_zeroed) { + for (i = 0; i < HIST_C0_ELEMS; i++) { + FMEMZERO((void FAR *) histogram[i], + HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); + } + cquantize->needs_zeroed = FALSE; + } +} + + +/* + * Switch to a new external colormap between output passes. + */ + +METHODDEF(void) +new_color_map_2_quant (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + + /* Reset the inverse color map */ + cquantize->needs_zeroed = TRUE; +} + + +/* + * Module initialization routine for 2-pass color quantization. + */ + +GLOBAL(void) +jinit_2pass_quantizer (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize; + int i; + + cquantize = (my_cquantize_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_cquantizer)); + cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; + cquantize->pub.start_pass = start_pass_2_quant; + cquantize->pub.new_color_map = new_color_map_2_quant; + cquantize->fserrors = NULL; /* flag optional arrays not allocated */ + cquantize->error_limiter = NULL; + + /* Make sure jdmaster didn't give me a case I can't handle */ + if (cinfo->out_color_components != 3) + ERREXIT(cinfo, JERR_NOTIMPL); + + /* Allocate the histogram/inverse colormap storage */ + cquantize->histogram = (hist3d) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, HIST_C0_ELEMS * SIZEOF(hist2d)); + for (i = 0; i < HIST_C0_ELEMS; i++) { + cquantize->histogram[i] = (hist2d) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); + } + cquantize->needs_zeroed = TRUE; /* histogram is garbage now */ + + /* Allocate storage for the completed colormap, if required. + * We do this now since it is FAR storage and may affect + * the memory manager's space calculations. + */ + if (cinfo->enable_2pass_quant) { + /* Make sure color count is acceptable */ + int desired = cinfo->desired_number_of_colors; + /* Lower bound on # of colors ... somewhat arbitrary as long as > 0 */ + if (desired < 8) + ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 8); + /* Make sure colormap indexes can be represented by JSAMPLEs */ + if (desired > MAXNUMCOLORS) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); + cquantize->sv_colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo,JPOOL_IMAGE, (JDIMENSION) desired, (JDIMENSION) 3); + cquantize->desired = desired; + } else + cquantize->sv_colormap = NULL; + + /* Only F-S dithering or no dithering is supported. */ + /* If user asks for ordered dither, give him F-S. */ + if (cinfo->dither_mode != JDITHER_NONE) + cinfo->dither_mode = JDITHER_FS; + + /* Allocate Floyd-Steinberg workspace if necessary. + * This isn't really needed until pass 2, but again it is FAR storage. + * Although we will cope with a later change in dither_mode, + * we do not promise to honor max_memory_to_use if dither_mode changes. + */ + if (cinfo->dither_mode == JDITHER_FS) { + cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) ((cinfo->output_width + 2) * (3 * SIZEOF(FSERROR)))); + /* Might as well create the error-limiting table too. */ + init_error_limit(cinfo); + } +} + +#endif /* QUANT_2PASS_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/jutils.c b/src/SDL2/external/jpeg-9/jutils.c new file mode 100644 index 000000000..5b16b6d03 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jutils.c @@ -0,0 +1,227 @@ +/* + * jutils.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2009-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains tables and miscellaneous utility routines needed + * for both compression and decompression. + * Note we prefix all global names with "j" to minimize conflicts with + * a surrounding application. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element + * of a DCT block read in natural order (left to right, top to bottom). + */ + +#if 0 /* This table is not actually needed in v6a */ + +const int jpeg_zigzag_order[DCTSIZE2] = { + 0, 1, 5, 6, 14, 15, 27, 28, + 2, 4, 7, 13, 16, 26, 29, 42, + 3, 8, 12, 17, 25, 30, 41, 43, + 9, 11, 18, 24, 31, 40, 44, 53, + 10, 19, 23, 32, 39, 45, 52, 54, + 20, 22, 33, 38, 46, 51, 55, 60, + 21, 34, 37, 47, 50, 56, 59, 61, + 35, 36, 48, 49, 57, 58, 62, 63 +}; + +#endif + +/* + * jpeg_natural_order[i] is the natural-order position of the i'th element + * of zigzag order. + * + * When reading corrupted data, the Huffman decoders could attempt + * to reference an entry beyond the end of this array (if the decoded + * zero run length reaches past the end of the block). To prevent + * wild stores without adding an inner-loop test, we put some extra + * "63"s after the real entries. This will cause the extra coefficient + * to be stored in location 63 of the block, not somewhere random. + * The worst case would be a run-length of 15, which means we need 16 + * fake entries. + */ + +const int jpeg_natural_order[DCTSIZE2+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 48, 41, 34, + 27, 20, 13, 6, 7, 14, 21, 28, + 35, 42, 49, 56, 57, 50, 43, 36, + 29, 22, 15, 23, 30, 37, 44, 51, + 58, 59, 52, 45, 38, 31, 39, 46, + 53, 60, 61, 54, 47, 55, 62, 63, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order7[7*7+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 48, 41, 34, + 27, 20, 13, 6, 14, 21, 28, 35, + 42, 49, 50, 43, 36, 29, 22, 30, + 37, 44, 51, 52, 45, 38, 46, 53, + 54, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order6[6*6+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 41, 34, 27, + 20, 13, 21, 28, 35, 42, 43, 36, + 29, 37, 44, 45, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order5[5*5+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 12, + 19, 26, 33, 34, 27, 20, 28, 35, + 36, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order4[4*4+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 25, 18, 11, 19, 26, 27, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order3[3*3+16] = { + 0, 1, 8, 16, 9, 2, 10, 17, + 18, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order2[2*2+16] = { + 0, 1, 8, 9, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + + +/* + * Arithmetic utilities + */ + +GLOBAL(long) +jdiv_round_up (long a, long b) +/* Compute a/b rounded up to next integer, ie, ceil(a/b) */ +/* Assumes a >= 0, b > 0 */ +{ + return (a + b - 1L) / b; +} + + +GLOBAL(long) +jround_up (long a, long b) +/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */ +/* Assumes a >= 0, b > 0 */ +{ + a += b - 1L; + return a - (a % b); +} + + +/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays + * and coefficient-block arrays. This won't work on 80x86 because the arrays + * are FAR and we're assuming a small-pointer memory model. However, some + * DOS compilers provide far-pointer versions of memcpy() and memset() even + * in the small-model libraries. These will be used if USE_FMEM is defined. + * Otherwise, the routines below do it the hard way. (The performance cost + * is not all that great, because these routines aren't very heavily used.) + */ + +#ifndef NEED_FAR_POINTERS /* normal case, same as regular macro */ +#define FMEMCOPY(dest,src,size) MEMCOPY(dest,src,size) +#else /* 80x86 case, define if we can */ +#ifdef USE_FMEM +#define FMEMCOPY(dest,src,size) _fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size)) +#else +/* This function is for use by the FMEMZERO macro defined in jpegint.h. + * Do not call this function directly, use the FMEMZERO macro instead. + */ +GLOBAL(void) +jzero_far (void FAR * target, size_t bytestozero) +/* Zero out a chunk of FAR memory. */ +/* This might be sample-array data, block-array data, or alloc_large data. */ +{ + register char FAR * ptr = (char FAR *) target; + register size_t count; + + for (count = bytestozero; count > 0; count--) { + *ptr++ = 0; + } +} +#endif +#endif + + +GLOBAL(void) +jcopy_sample_rows (JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols) +/* Copy some rows of samples from one place to another. + * num_rows rows are copied from input_array[source_row++] + * to output_array[dest_row++]; these areas may overlap for duplication. + * The source and destination arrays must be at least as wide as num_cols. + */ +{ + register JSAMPROW inptr, outptr; +#ifdef FMEMCOPY + register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE)); +#else + register JDIMENSION count; +#endif + register int row; + + input_array += source_row; + output_array += dest_row; + + for (row = num_rows; row > 0; row--) { + inptr = *input_array++; + outptr = *output_array++; +#ifdef FMEMCOPY + FMEMCOPY(outptr, inptr, count); +#else + for (count = num_cols; count > 0; count--) + *outptr++ = *inptr++; /* needn't bother with GETJSAMPLE() here */ +#endif + } +} + + +GLOBAL(void) +jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks) +/* Copy a row of coefficient blocks from one place to another. */ +{ +#ifdef FMEMCOPY + FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF))); +#else + register JCOEFPTR inptr, outptr; + register long count; + + inptr = (JCOEFPTR) input_row; + outptr = (JCOEFPTR) output_row; + for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) { + *outptr++ = *inptr++; + } +#endif +} diff --git a/src/SDL2/external/jpeg-9/jversion.h b/src/SDL2/external/jpeg-9/jversion.h new file mode 100644 index 000000000..232085f13 --- /dev/null +++ b/src/SDL2/external/jpeg-9/jversion.h @@ -0,0 +1,14 @@ +/* + * jversion.h + * + * Copyright (C) 1991-2013, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains software version identification. + */ + + +#define JVERSION "9 13-Jan-2013" + +#define JCOPYRIGHT "Copyright (C) 2013, Thomas G. Lane, Guido Vollbeding" diff --git a/src/SDL2/external/jpeg-9/libjpeg.map b/src/SDL2/external/jpeg-9/libjpeg.map new file mode 100644 index 000000000..fa70b1f12 --- /dev/null +++ b/src/SDL2/external/jpeg-9/libjpeg.map @@ -0,0 +1,4 @@ +LIBJPEG_9.0 { + global: + *; +}; diff --git a/src/SDL2/external/jpeg-9/libjpeg.txt b/src/SDL2/external/jpeg-9/libjpeg.txt new file mode 100644 index 000000000..292a12705 --- /dev/null +++ b/src/SDL2/external/jpeg-9/libjpeg.txt @@ -0,0 +1,3098 @@ +USING THE IJG JPEG LIBRARY + +Copyright (C) 1994-2013, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +This file describes how to use the IJG JPEG library within an application +program. Read it if you want to write a program that uses the library. + +The file example.c provides heavily commented skeleton code for calling the +JPEG library. Also see jpeglib.h (the include file to be used by application +programs) for full details about data structures and function parameter lists. +The library source code, of course, is the ultimate reference. + +Note that there have been *major* changes from the application interface +presented by IJG version 4 and earlier versions. The old design had several +inherent limitations, and it had accumulated a lot of cruft as we added +features while trying to minimize application-interface changes. We have +sacrificed backward compatibility in the version 5 rewrite, but we think the +improvements justify this. + + +TABLE OF CONTENTS +----------------- + +Overview: + Functions provided by the library + Outline of typical usage +Basic library usage: + Data formats + Compression details + Decompression details + Mechanics of usage: include files, linking, etc +Advanced features: + Compression parameter selection + Decompression parameter selection + Special color spaces + Error handling + Compressed data handling (source and destination managers) + I/O suspension + Progressive JPEG support + Buffered-image mode + Abbreviated datastreams and multiple images + Special markers + Raw (downsampled) image data + Really raw data: DCT coefficients + Progress monitoring + Memory management + Memory usage + Library compile-time options + Portability considerations + Notes for MS-DOS implementors + +You should read at least the overview and basic usage sections before trying +to program with the library. The sections on advanced features can be read +if and when you need them. + + +OVERVIEW +======== + +Functions provided by the library +--------------------------------- + +The IJG JPEG library provides C code to read and write JPEG-compressed image +files. The surrounding application program receives or supplies image data a +scanline at a time, using a straightforward uncompressed image format. All +details of color conversion and other preprocessing/postprocessing can be +handled by the library. + +The library includes a substantial amount of code that is not covered by the +JPEG standard but is necessary for typical applications of JPEG. These +functions preprocess the image before JPEG compression or postprocess it after +decompression. They include colorspace conversion, downsampling/upsampling, +and color quantization. The application indirectly selects use of this code +by specifying the format in which it wishes to supply or receive image data. +For example, if colormapped output is requested, then the decompression +library automatically invokes color quantization. + +A wide range of quality vs. speed tradeoffs are possible in JPEG processing, +and even more so in decompression postprocessing. The decompression library +provides multiple implementations that cover most of the useful tradeoffs, +ranging from very-high-quality down to fast-preview operation. On the +compression side we have generally not provided low-quality choices, since +compression is normally less time-critical. It should be understood that the +low-quality modes may not meet the JPEG standard's accuracy requirements; +nonetheless, they are useful for viewers. + +A word about functions *not* provided by the library. We handle a subset of +the ISO JPEG standard; most baseline, extended-sequential, and progressive +JPEG processes are supported. (Our subset includes all features now in common +use.) Unsupported ISO options include: + * Hierarchical storage + * Lossless JPEG + * DNL marker + * Nonintegral subsampling ratios +We support both 8- and 12-bit data precision, but this is a compile-time +choice rather than a run-time choice; hence it is difficult to use both +precisions in a single application. + +By itself, the library handles only interchange JPEG datastreams --- in +particular the widely used JFIF file format. The library can be used by +surrounding code to process interchange or abbreviated JPEG datastreams that +are embedded in more complex file formats. (For example, this library is +used by the free LIBTIFF library to support JPEG compression in TIFF.) + + +Outline of typical usage +------------------------ + +The rough outline of a JPEG compression operation is: + + Allocate and initialize a JPEG compression object + Specify the destination for the compressed data (eg, a file) + Set parameters for compression, including image size & colorspace + jpeg_start_compress(...); + while (scan lines remain to be written) + jpeg_write_scanlines(...); + jpeg_finish_compress(...); + Release the JPEG compression object + +A JPEG compression object holds parameters and working state for the JPEG +library. We make creation/destruction of the object separate from starting +or finishing compression of an image; the same object can be re-used for a +series of image compression operations. This makes it easy to re-use the +same parameter settings for a sequence of images. Re-use of a JPEG object +also has important implications for processing abbreviated JPEG datastreams, +as discussed later. + +The image data to be compressed is supplied to jpeg_write_scanlines() from +in-memory buffers. If the application is doing file-to-file compression, +reading image data from the source file is the application's responsibility. +The library emits compressed data by calling a "data destination manager", +which typically will write the data into a file; but the application can +provide its own destination manager to do something else. + +Similarly, the rough outline of a JPEG decompression operation is: + + Allocate and initialize a JPEG decompression object + Specify the source of the compressed data (eg, a file) + Call jpeg_read_header() to obtain image info + Set parameters for decompression + jpeg_start_decompress(...); + while (scan lines remain to be read) + jpeg_read_scanlines(...); + jpeg_finish_decompress(...); + Release the JPEG decompression object + +This is comparable to the compression outline except that reading the +datastream header is a separate step. This is helpful because information +about the image's size, colorspace, etc is available when the application +selects decompression parameters. For example, the application can choose an +output scaling ratio that will fit the image into the available screen size. + +The decompression library obtains compressed data by calling a data source +manager, which typically will read the data from a file; but other behaviors +can be obtained with a custom source manager. Decompressed data is delivered +into in-memory buffers passed to jpeg_read_scanlines(). + +It is possible to abort an incomplete compression or decompression operation +by calling jpeg_abort(); or, if you do not need to retain the JPEG object, +simply release it by calling jpeg_destroy(). + +JPEG compression and decompression objects are two separate struct types. +However, they share some common fields, and certain routines such as +jpeg_destroy() can work on either type of object. + +The JPEG library has no static variables: all state is in the compression +or decompression object. Therefore it is possible to process multiple +compression and decompression operations concurrently, using multiple JPEG +objects. + +Both compression and decompression can be done in an incremental memory-to- +memory fashion, if suitable source/destination managers are used. See the +section on "I/O suspension" for more details. + + +BASIC LIBRARY USAGE +=================== + +Data formats +------------ + +Before diving into procedural details, it is helpful to understand the +image data format that the JPEG library expects or returns. + +The standard input image format is a rectangular array of pixels, with each +pixel having the same number of "component" or "sample" values (color +channels). You must specify how many components there are and the colorspace +interpretation of the components. Most applications will use RGB data +(three components per pixel) or grayscale data (one component per pixel). +PLEASE NOTE THAT RGB DATA IS THREE SAMPLES PER PIXEL, GRAYSCALE ONLY ONE. +A remarkable number of people manage to miss this, only to find that their +programs don't work with grayscale JPEG files. + +There is no provision for colormapped input. JPEG files are always full-color +or full grayscale (or sometimes another colorspace such as CMYK). You can +feed in a colormapped image by expanding it to full-color format. However +JPEG often doesn't work very well with source data that has been colormapped, +because of dithering noise. This is discussed in more detail in the JPEG FAQ +and the other references mentioned in the README file. + +Pixels are stored by scanlines, with each scanline running from left to +right. The component values for each pixel are adjacent in the row; for +example, R,G,B,R,G,B,R,G,B,... for 24-bit RGB color. Each scanline is an +array of data type JSAMPLE --- which is typically "unsigned char", unless +you've changed jmorecfg.h. (You can also change the RGB pixel layout, say +to B,G,R order, by modifying jmorecfg.h. But see the restrictions listed in +that file before doing so.) + +A 2-D array of pixels is formed by making a list of pointers to the starts of +scanlines; so the scanlines need not be physically adjacent in memory. Even +if you process just one scanline at a time, you must make a one-element +pointer array to conform to this structure. Pointers to JSAMPLE rows are of +type JSAMPROW, and the pointer to the pointer array is of type JSAMPARRAY. + +The library accepts or supplies one or more complete scanlines per call. +It is not possible to process part of a row at a time. Scanlines are always +processed top-to-bottom. You can process an entire image in one call if you +have it all in memory, but usually it's simplest to process one scanline at +a time. + +For best results, source data values should have the precision specified by +BITS_IN_JSAMPLE (normally 8 bits). For instance, if you choose to compress +data that's only 6 bits/channel, you should left-justify each value in a +byte before passing it to the compressor. If you need to compress data +that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 12. +(See "Library compile-time options", later.) + + +The data format returned by the decompressor is the same in all details, +except that colormapped output is supported. (Again, a JPEG file is never +colormapped. But you can ask the decompressor to perform on-the-fly color +quantization to deliver colormapped output.) If you request colormapped +output then the returned data array contains a single JSAMPLE per pixel; +its value is an index into a color map. The color map is represented as +a 2-D JSAMPARRAY in which each row holds the values of one color component, +that is, colormap[i][j] is the value of the i'th color component for pixel +value (map index) j. Note that since the colormap indexes are stored in +JSAMPLEs, the maximum number of colors is limited by the size of JSAMPLE +(ie, at most 256 colors for an 8-bit JPEG library). + + +Compression details +------------------- + +Here we revisit the JPEG compression outline given in the overview. + +1. Allocate and initialize a JPEG compression object. + +A JPEG compression object is a "struct jpeg_compress_struct". (It also has +a bunch of subsidiary structures which are allocated via malloc(), but the +application doesn't control those directly.) This struct can be just a local +variable in the calling routine, if a single routine is going to execute the +whole JPEG compression sequence. Otherwise it can be static or allocated +from malloc(). + +You will also need a structure representing a JPEG error handler. The part +of this that the library cares about is a "struct jpeg_error_mgr". If you +are providing your own error handler, you'll typically want to embed the +jpeg_error_mgr struct in a larger structure; this is discussed later under +"Error handling". For now we'll assume you are just using the default error +handler. The default error handler will print JPEG error/warning messages +on stderr, and it will call exit() if a fatal error occurs. + +You must initialize the error handler structure, store a pointer to it into +the JPEG object's "err" field, and then call jpeg_create_compress() to +initialize the rest of the JPEG object. + +Typical code for this step, if you are using the default error handler, is + + struct jpeg_compress_struct cinfo; + struct jpeg_error_mgr jerr; + ... + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_compress(&cinfo); + +jpeg_create_compress allocates a small amount of memory, so it could fail +if you are out of memory. In that case it will exit via the error handler; +that's why the error handler must be initialized first. + + +2. Specify the destination for the compressed data (eg, a file). + +As previously mentioned, the JPEG library delivers compressed data to a +"data destination" module. The library includes one data destination +module which knows how to write to a stdio stream. You can use your own +destination module if you want to do something else, as discussed later. + +If you use the standard destination module, you must open the target stdio +stream beforehand. Typical code for this step looks like: + + FILE * outfile; + ... + if ((outfile = fopen(filename, "wb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_dest(&cinfo, outfile); + +where the last line invokes the standard destination module. + +WARNING: it is critical that the binary compressed data be delivered to the +output file unchanged. On non-Unix systems the stdio library may perform +newline translation or otherwise corrupt binary data. To suppress this +behavior, you may need to use a "b" option to fopen (as shown above), or use +setmode() or another routine to put the stdio stream in binary mode. See +cjpeg.c and djpeg.c for code that has been found to work on many systems. + +You can select the data destination after setting other parameters (step 3), +if that's more convenient. You may not change the destination between +calling jpeg_start_compress() and jpeg_finish_compress(). + + +3. Set parameters for compression, including image size & colorspace. + +You must supply information about the source image by setting the following +fields in the JPEG object (cinfo structure): + + image_width Width of image, in pixels + image_height Height of image, in pixels + input_components Number of color channels (samples per pixel) + in_color_space Color space of source image + +The image dimensions are, hopefully, obvious. JPEG supports image dimensions +of 1 to 64K pixels in either direction. The input color space is typically +RGB or grayscale, and input_components is 3 or 1 accordingly. (See "Special +color spaces", later, for more info.) The in_color_space field must be +assigned one of the J_COLOR_SPACE enum constants, typically JCS_RGB or +JCS_GRAYSCALE. + +JPEG has a large number of compression parameters that determine how the +image is encoded. Most applications don't need or want to know about all +these parameters. You can set all the parameters to reasonable defaults by +calling jpeg_set_defaults(); then, if there are particular values you want +to change, you can do so after that. The "Compression parameter selection" +section tells about all the parameters. + +You must set in_color_space correctly before calling jpeg_set_defaults(), +because the defaults depend on the source image colorspace. However the +other three source image parameters need not be valid until you call +jpeg_start_compress(). There's no harm in calling jpeg_set_defaults() more +than once, if that happens to be convenient. + +Typical code for a 24-bit RGB source image is + + cinfo.image_width = Width; /* image width and height, in pixels */ + cinfo.image_height = Height; + cinfo.input_components = 3; /* # of color components per pixel */ + cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ + + jpeg_set_defaults(&cinfo); + /* Make optional parameter settings here */ + + +4. jpeg_start_compress(...); + +After you have established the data destination and set all the necessary +source image info and other parameters, call jpeg_start_compress() to begin +a compression cycle. This will initialize internal state, allocate working +storage, and emit the first few bytes of the JPEG datastream header. + +Typical code: + + jpeg_start_compress(&cinfo, TRUE); + +The "TRUE" parameter ensures that a complete JPEG interchange datastream +will be written. This is appropriate in most cases. If you think you might +want to use an abbreviated datastream, read the section on abbreviated +datastreams, below. + +Once you have called jpeg_start_compress(), you may not alter any JPEG +parameters or other fields of the JPEG object until you have completed +the compression cycle. + + +5. while (scan lines remain to be written) + jpeg_write_scanlines(...); + +Now write all the required image data by calling jpeg_write_scanlines() +one or more times. You can pass one or more scanlines in each call, up +to the total image height. In most applications it is convenient to pass +just one or a few scanlines at a time. The expected format for the passed +data is discussed under "Data formats", above. + +Image data should be written in top-to-bottom scanline order. The JPEG spec +contains some weasel wording about how top and bottom are application-defined +terms (a curious interpretation of the English language...) but if you want +your files to be compatible with everyone else's, you WILL use top-to-bottom +order. If the source data must be read in bottom-to-top order, you can use +the JPEG library's virtual array mechanism to invert the data efficiently. +Examples of this can be found in the sample application cjpeg. + +The library maintains a count of the number of scanlines written so far +in the next_scanline field of the JPEG object. Usually you can just use +this variable as the loop counter, so that the loop test looks like +"while (cinfo.next_scanline < cinfo.image_height)". + +Code for this step depends heavily on the way that you store the source data. +example.c shows the following code for the case of a full-size 2-D source +array containing 3-byte RGB pixels: + + JSAMPROW row_pointer[1]; /* pointer to a single row */ + int row_stride; /* physical row width in buffer */ + + row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ + + while (cinfo.next_scanline < cinfo.image_height) { + row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; + jpeg_write_scanlines(&cinfo, row_pointer, 1); + } + +jpeg_write_scanlines() returns the number of scanlines actually written. +This will normally be equal to the number passed in, so you can usually +ignore the return value. It is different in just two cases: + * If you try to write more scanlines than the declared image height, + the additional scanlines are ignored. + * If you use a suspending data destination manager, output buffer overrun + will cause the compressor to return before accepting all the passed lines. + This feature is discussed under "I/O suspension", below. The normal + stdio destination manager will NOT cause this to happen. +In any case, the return value is the same as the change in the value of +next_scanline. + + +6. jpeg_finish_compress(...); + +After all the image data has been written, call jpeg_finish_compress() to +complete the compression cycle. This step is ESSENTIAL to ensure that the +last bufferload of data is written to the data destination. +jpeg_finish_compress() also releases working memory associated with the JPEG +object. + +Typical code: + + jpeg_finish_compress(&cinfo); + +If using the stdio destination manager, don't forget to close the output +stdio stream (if necessary) afterwards. + +If you have requested a multi-pass operating mode, such as Huffman code +optimization, jpeg_finish_compress() will perform the additional passes using +data buffered by the first pass. In this case jpeg_finish_compress() may take +quite a while to complete. With the default compression parameters, this will +not happen. + +It is an error to call jpeg_finish_compress() before writing the necessary +total number of scanlines. If you wish to abort compression, call +jpeg_abort() as discussed below. + +After completing a compression cycle, you may dispose of the JPEG object +as discussed next, or you may use it to compress another image. In that case +return to step 2, 3, or 4 as appropriate. If you do not change the +destination manager, the new datastream will be written to the same target. +If you do not change any JPEG parameters, the new datastream will be written +with the same parameters as before. Note that you can change the input image +dimensions freely between cycles, but if you change the input colorspace, you +should call jpeg_set_defaults() to adjust for the new colorspace; and then +you'll need to repeat all of step 3. + + +7. Release the JPEG compression object. + +When you are done with a JPEG compression object, destroy it by calling +jpeg_destroy_compress(). This will free all subsidiary memory (regardless of +the previous state of the object). Or you can call jpeg_destroy(), which +works for either compression or decompression objects --- this may be more +convenient if you are sharing code between compression and decompression +cases. (Actually, these routines are equivalent except for the declared type +of the passed pointer. To avoid gripes from ANSI C compilers, jpeg_destroy() +should be passed a j_common_ptr.) + +If you allocated the jpeg_compress_struct structure from malloc(), freeing +it is your responsibility --- jpeg_destroy() won't. Ditto for the error +handler structure. + +Typical code: + + jpeg_destroy_compress(&cinfo); + + +8. Aborting. + +If you decide to abort a compression cycle before finishing, you can clean up +in either of two ways: + +* If you don't need the JPEG object any more, just call + jpeg_destroy_compress() or jpeg_destroy() to release memory. This is + legitimate at any point after calling jpeg_create_compress() --- in fact, + it's safe even if jpeg_create_compress() fails. + +* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call + jpeg_abort() which works on both compression and decompression objects. + This will return the object to an idle state, releasing any working memory. + jpeg_abort() is allowed at any time after successful object creation. + +Note that cleaning up the data destination, if required, is your +responsibility; neither of these routines will call term_destination(). +(See "Compressed data handling", below, for more about that.) + +jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG +object that has reported an error by calling error_exit (see "Error handling" +for more info). The internal state of such an object is likely to be out of +whack. Either of these two routines will return the object to a known state. + + +Decompression details +--------------------- + +Here we revisit the JPEG decompression outline given in the overview. + +1. Allocate and initialize a JPEG decompression object. + +This is just like initialization for compression, as discussed above, +except that the object is a "struct jpeg_decompress_struct" and you +call jpeg_create_decompress(). Error handling is exactly the same. + +Typical code: + + struct jpeg_decompress_struct cinfo; + struct jpeg_error_mgr jerr; + ... + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_decompress(&cinfo); + +(Both here and in the IJG code, we usually use variable name "cinfo" for +both compression and decompression objects.) + + +2. Specify the source of the compressed data (eg, a file). + +As previously mentioned, the JPEG library reads compressed data from a "data +source" module. The library includes one data source module which knows how +to read from a stdio stream. You can use your own source module if you want +to do something else, as discussed later. + +If you use the standard source module, you must open the source stdio stream +beforehand. Typical code for this step looks like: + + FILE * infile; + ... + if ((infile = fopen(filename, "rb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_src(&cinfo, infile); + +where the last line invokes the standard source module. + +WARNING: it is critical that the binary compressed data be read unchanged. +On non-Unix systems the stdio library may perform newline translation or +otherwise corrupt binary data. To suppress this behavior, you may need to use +a "b" option to fopen (as shown above), or use setmode() or another routine to +put the stdio stream in binary mode. See cjpeg.c and djpeg.c for code that +has been found to work on many systems. + +You may not change the data source between calling jpeg_read_header() and +jpeg_finish_decompress(). If you wish to read a series of JPEG images from +a single source file, you should repeat the jpeg_read_header() to +jpeg_finish_decompress() sequence without reinitializing either the JPEG +object or the data source module; this prevents buffered input data from +being discarded. + + +3. Call jpeg_read_header() to obtain image info. + +Typical code for this step is just + + jpeg_read_header(&cinfo, TRUE); + +This will read the source datastream header markers, up to the beginning +of the compressed data proper. On return, the image dimensions and other +info have been stored in the JPEG object. The application may wish to +consult this information before selecting decompression parameters. + +More complex code is necessary if + * A suspending data source is used --- in that case jpeg_read_header() + may return before it has read all the header data. See "I/O suspension", + below. The normal stdio source manager will NOT cause this to happen. + * Abbreviated JPEG files are to be processed --- see the section on + abbreviated datastreams. Standard applications that deal only in + interchange JPEG files need not be concerned with this case either. + +It is permissible to stop at this point if you just wanted to find out the +image dimensions and other header info for a JPEG file. In that case, +call jpeg_destroy() when you are done with the JPEG object, or call +jpeg_abort() to return it to an idle state before selecting a new data +source and reading another header. + + +4. Set parameters for decompression. + +jpeg_read_header() sets appropriate default decompression parameters based on +the properties of the image (in particular, its colorspace). However, you +may well want to alter these defaults before beginning the decompression. +For example, the default is to produce full color output from a color file. +If you want colormapped output you must ask for it. Other options allow the +returned image to be scaled and allow various speed/quality tradeoffs to be +selected. "Decompression parameter selection", below, gives details. + +If the defaults are appropriate, nothing need be done at this step. + +Note that all default values are set by each call to jpeg_read_header(). +If you reuse a decompression object, you cannot expect your parameter +settings to be preserved across cycles, as you can for compression. +You must set desired parameter values each time. + + +5. jpeg_start_decompress(...); + +Once the parameter values are satisfactory, call jpeg_start_decompress() to +begin decompression. This will initialize internal state, allocate working +memory, and prepare for returning data. + +Typical code is just + + jpeg_start_decompress(&cinfo); + +If you have requested a multi-pass operating mode, such as 2-pass color +quantization, jpeg_start_decompress() will do everything needed before data +output can begin. In this case jpeg_start_decompress() may take quite a while +to complete. With a single-scan (non progressive) JPEG file and default +decompression parameters, this will not happen; jpeg_start_decompress() will +return quickly. + +After this call, the final output image dimensions, including any requested +scaling, are available in the JPEG object; so is the selected colormap, if +colormapped output has been requested. Useful fields include + + output_width image width and height, as scaled + output_height + out_color_components # of color components in out_color_space + output_components # of color components returned per pixel + colormap the selected colormap, if any + actual_number_of_colors number of entries in colormap + +output_components is 1 (a colormap index) when quantizing colors; otherwise it +equals out_color_components. It is the number of JSAMPLE values that will be +emitted per pixel in the output arrays. + +Typically you will need to allocate data buffers to hold the incoming image. +You will need output_width * output_components JSAMPLEs per scanline in your +output buffer, and a total of output_height scanlines will be returned. + +Note: if you are using the JPEG library's internal memory manager to allocate +data buffers (as djpeg does), then the manager's protocol requires that you +request large buffers *before* calling jpeg_start_decompress(). This is a +little tricky since the output_XXX fields are not normally valid then. You +can make them valid by calling jpeg_calc_output_dimensions() after setting the +relevant parameters (scaling, output color space, and quantization flag). + + +6. while (scan lines remain to be read) + jpeg_read_scanlines(...); + +Now you can read the decompressed image data by calling jpeg_read_scanlines() +one or more times. At each call, you pass in the maximum number of scanlines +to be read (ie, the height of your working buffer); jpeg_read_scanlines() +will return up to that many lines. The return value is the number of lines +actually read. The format of the returned data is discussed under "Data +formats", above. Don't forget that grayscale and color JPEGs will return +different data formats! + +Image data is returned in top-to-bottom scanline order. If you must write +out the image in bottom-to-top order, you can use the JPEG library's virtual +array mechanism to invert the data efficiently. Examples of this can be +found in the sample application djpeg. + +The library maintains a count of the number of scanlines returned so far +in the output_scanline field of the JPEG object. Usually you can just use +this variable as the loop counter, so that the loop test looks like +"while (cinfo.output_scanline < cinfo.output_height)". (Note that the test +should NOT be against image_height, unless you never use scaling. The +image_height field is the height of the original unscaled image.) +The return value always equals the change in the value of output_scanline. + +If you don't use a suspending data source, it is safe to assume that +jpeg_read_scanlines() reads at least one scanline per call, until the +bottom of the image has been reached. + +If you use a buffer larger than one scanline, it is NOT safe to assume that +jpeg_read_scanlines() fills it. (The current implementation returns only a +few scanlines per call, no matter how large a buffer you pass.) So you must +always provide a loop that calls jpeg_read_scanlines() repeatedly until the +whole image has been read. + + +7. jpeg_finish_decompress(...); + +After all the image data has been read, call jpeg_finish_decompress() to +complete the decompression cycle. This causes working memory associated +with the JPEG object to be released. + +Typical code: + + jpeg_finish_decompress(&cinfo); + +If using the stdio source manager, don't forget to close the source stdio +stream if necessary. + +It is an error to call jpeg_finish_decompress() before reading the correct +total number of scanlines. If you wish to abort decompression, call +jpeg_abort() as discussed below. + +After completing a decompression cycle, you may dispose of the JPEG object as +discussed next, or you may use it to decompress another image. In that case +return to step 2 or 3 as appropriate. If you do not change the source +manager, the next image will be read from the same source. + + +8. Release the JPEG decompression object. + +When you are done with a JPEG decompression object, destroy it by calling +jpeg_destroy_decompress() or jpeg_destroy(). The previous discussion of +destroying compression objects applies here too. + +Typical code: + + jpeg_destroy_decompress(&cinfo); + + +9. Aborting. + +You can abort a decompression cycle by calling jpeg_destroy_decompress() or +jpeg_destroy() if you don't need the JPEG object any more, or +jpeg_abort_decompress() or jpeg_abort() if you want to reuse the object. +The previous discussion of aborting compression cycles applies here too. + + +Mechanics of usage: include files, linking, etc +----------------------------------------------- + +Applications using the JPEG library should include the header file jpeglib.h +to obtain declarations of data types and routines. Before including +jpeglib.h, include system headers that define at least the typedefs FILE and +size_t. On ANSI-conforming systems, including is sufficient; on +older Unix systems, you may need to define size_t. + +If the application needs to refer to individual JPEG library error codes, also +include jerror.h to define those symbols. + +jpeglib.h indirectly includes the files jconfig.h and jmorecfg.h. If you are +installing the JPEG header files in a system directory, you will want to +install all four files: jpeglib.h, jerror.h, jconfig.h, jmorecfg.h. + +The most convenient way to include the JPEG code into your executable program +is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix +machines) and reference it at your link step. If you use only half of the +library (only compression or only decompression), only that much code will be +included from the library, unless your linker is hopelessly brain-damaged. +The supplied makefiles build libjpeg.a automatically (see install.txt). + +While you can build the JPEG library as a shared library if the whim strikes +you, we don't really recommend it. The trouble with shared libraries is that +at some point you'll probably try to substitute a new version of the library +without recompiling the calling applications. That generally doesn't work +because the parameter struct declarations usually change with each new +version. In other words, the library's API is *not* guaranteed binary +compatible across versions; we only try to ensure source-code compatibility. +(In hindsight, it might have been smarter to hide the parameter structs from +applications and introduce a ton of access functions instead. Too late now, +however.) + +On some systems your application may need to set up a signal handler to ensure +that temporary files are deleted if the program is interrupted. This is most +critical if you are on MS-DOS and use the jmemdos.c memory manager back end; +it will try to grab extended memory for temp files, and that space will NOT be +freed automatically. See cjpeg.c or djpeg.c for an example signal handler. + +It may be worth pointing out that the core JPEG library does not actually +require the stdio library: only the default source/destination managers and +error handler need it. You can use the library in a stdio-less environment +if you replace those modules and use jmemnobs.c (or another memory manager of +your own devising). More info about the minimum system library requirements +may be found in jinclude.h. + + +ADVANCED FEATURES +================= + +Compression parameter selection +------------------------------- + +This section describes all the optional parameters you can set for JPEG +compression, as well as the "helper" routines provided to assist in this +task. Proper setting of some parameters requires detailed understanding +of the JPEG standard; if you don't know what a parameter is for, it's best +not to mess with it! See REFERENCES in the README file for pointers to +more info about JPEG. + +It's a good idea to call jpeg_set_defaults() first, even if you plan to set +all the parameters; that way your code is more likely to work with future JPEG +libraries that have additional parameters. For the same reason, we recommend +you use a helper routine where one is provided, in preference to twiddling +cinfo fields directly. + +The helper routines are: + +jpeg_set_defaults (j_compress_ptr cinfo) + This routine sets all JPEG parameters to reasonable defaults, using + only the input image's color space (field in_color_space, which must + already be set in cinfo). Many applications will only need to use + this routine and perhaps jpeg_set_quality(). + +jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) + Sets the JPEG file's colorspace (field jpeg_color_space) as specified, + and sets other color-space-dependent parameters appropriately. See + "Special color spaces", below, before using this. A large number of + parameters, including all per-component parameters, are set by this + routine; if you want to twiddle individual parameters you should call + jpeg_set_colorspace() before rather than after. + +jpeg_default_colorspace (j_compress_ptr cinfo) + Selects an appropriate JPEG colorspace based on cinfo->in_color_space, + and calls jpeg_set_colorspace(). This is actually a subroutine of + jpeg_set_defaults(). It's broken out in case you want to change + just the colorspace-dependent JPEG parameters. + +jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) + Constructs JPEG quantization tables appropriate for the indicated + quality setting. The quality value is expressed on the 0..100 scale + recommended by IJG (cjpeg's "-quality" switch uses this routine). + Note that the exact mapping from quality values to tables may change + in future IJG releases as more is learned about DCT quantization. + If the force_baseline parameter is TRUE, then the quantization table + entries are constrained to the range 1..255 for full JPEG baseline + compatibility. In the current implementation, this only makes a + difference for quality settings below 25, and it effectively prevents + very small/low quality files from being generated. The IJG decoder + is capable of reading the non-baseline files generated at low quality + settings when force_baseline is FALSE, but other decoders may not be. + +jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, + boolean force_baseline) + Same as jpeg_set_quality() except that the generated tables are the + sample tables given in the JPEC spec section K.1, multiplied by the + specified scale factor (which is expressed as a percentage; thus + scale_factor = 100 reproduces the spec's tables). Note that larger + scale factors give lower quality. This entry point is useful for + conforming to the Adobe PostScript DCT conventions, but we do not + recommend linear scaling as a user-visible quality scale otherwise. + force_baseline again constrains the computed table entries to 1..255. + +int jpeg_quality_scaling (int quality) + Converts a value on the IJG-recommended quality scale to a linear + scaling percentage. Note that this routine may change or go away + in future releases --- IJG may choose to adopt a scaling method that + can't be expressed as a simple scalar multiplier, in which case the + premise of this routine collapses. Caveat user. + +jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline) + Set default quantization tables with linear q_scale_factor[] values + (see below). + +jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, boolean force_baseline) + Allows an arbitrary quantization table to be created. which_tbl + indicates which table slot to fill. basic_table points to an array + of 64 unsigned ints given in normal array order. These values are + multiplied by scale_factor/100 and then clamped to the range 1..65535 + (or to 1..255 if force_baseline is TRUE). + CAUTION: prior to library version 6a, jpeg_add_quant_table expected + the basic table to be given in JPEG zigzag order. If you need to + write code that works with either older or newer versions of this + routine, you must check the library version number. Something like + "#if JPEG_LIB_VERSION >= 61" is the right test. + +jpeg_simple_progression (j_compress_ptr cinfo) + Generates a default scan script for writing a progressive-JPEG file. + This is the recommended method of creating a progressive file, + unless you want to make a custom scan sequence. You must ensure that + the JPEG color space is set correctly before calling this routine. + + +Compression parameters (cinfo fields) include: + +boolean arith_code + If TRUE, use arithmetic coding. + If FALSE, use Huffman coding. + +int block_size + Set DCT block size. All N from 1 to 16 are possible. + Default is 8 (baseline format). + Larger values produce higher compression, + smaller values produce higher quality. + An exact DCT stage is possible with 1 or 2. + With the default quality of 75 and default Luminance qtable + the DCT+Quantization stage is lossless for value 1. + Note that values other than 8 require a SmartScale capable decoder, + introduced with IJG JPEG 8. Setting the block_size parameter for + compression works with version 8c and later. + +J_DCT_METHOD dct_method + Selects the algorithm used for the DCT step. Choices are: + JDCT_ISLOW: slow but accurate integer algorithm + JDCT_IFAST: faster, less accurate integer method + JDCT_FLOAT: floating-point method + JDCT_DEFAULT: default method (normally JDCT_ISLOW) + JDCT_FASTEST: fastest method (normally JDCT_IFAST) + The FLOAT method is very slightly more accurate than the ISLOW method, + but may give different results on different machines due to varying + roundoff behavior. The integer methods should give the same results + on all machines. On machines with sufficiently fast FP hardware, the + floating-point method may also be the fastest. The IFAST method is + considerably less accurate than the other two; its use is not + recommended if high quality is a concern. JDCT_DEFAULT and + JDCT_FASTEST are macros configurable by each installation. + +unsigned int scale_num, scale_denom + Scale the image by the fraction scale_num/scale_denom. Default is + 1/1, or no scaling. Currently, the supported scaling ratios are + M/N with all N from 1 to 16, where M is the destination DCT size, + which is 8 by default (see block_size parameter above). + (The library design allows for arbitrary scaling ratios but this + is not likely to be implemented any time soon.) + +J_COLOR_SPACE jpeg_color_space +int num_components + The JPEG color space and corresponding number of components; see + "Special color spaces", below, for more info. We recommend using + jpeg_set_colorspace() if you want to change these. + +J_COLOR_TRANSFORM color_transform + Internal color transform identifier, writes LSE marker if nonzero + (requires decoder with inverse color transform support, introduced + with IJG JPEG 9). + Two values are currently possible: JCT_NONE and JCT_SUBTRACT_GREEN. + Set this value for lossless RGB application *before* calling + jpeg_set_colorspace(), because entropy table assignment in + jpeg_set_colorspace() depends on color_transform. + +boolean optimize_coding + TRUE causes the compressor to compute optimal Huffman coding tables + for the image. This requires an extra pass over the data and + therefore costs a good deal of space and time. The default is + FALSE, which tells the compressor to use the supplied or default + Huffman tables. In most cases optimal tables save only a few percent + of file size compared to the default tables. Note that when this is + TRUE, you need not supply Huffman tables at all, and any you do + supply will be overwritten. + +unsigned int restart_interval +int restart_in_rows + To emit restart markers in the JPEG file, set one of these nonzero. + Set restart_interval to specify the exact interval in MCU blocks. + Set restart_in_rows to specify the interval in MCU rows. (If + restart_in_rows is not 0, then restart_interval is set after the + image width in MCUs is computed.) Defaults are zero (no restarts). + One restart marker per MCU row is often a good choice. + NOTE: the overhead of restart markers is higher in grayscale JPEG + files than in color files, and MUCH higher in progressive JPEGs. + If you use restarts, you may want to use larger intervals in those + cases. + +const jpeg_scan_info * scan_info +int num_scans + By default, scan_info is NULL; this causes the compressor to write a + single-scan sequential JPEG file. If not NULL, scan_info points to + an array of scan definition records of length num_scans. The + compressor will then write a JPEG file having one scan for each scan + definition record. This is used to generate noninterleaved or + progressive JPEG files. The library checks that the scan array + defines a valid JPEG scan sequence. (jpeg_simple_progression creates + a suitable scan definition array for progressive JPEG.) This is + discussed further under "Progressive JPEG support". + +boolean do_fancy_downsampling + If TRUE, use direct DCT scaling with DCT size > 8 for downsampling + of chroma components. + If FALSE, use only DCT size <= 8 and simple separate downsampling. + Default is TRUE. + For better image stability in multiple generation compression cycles + it is preferable that this value matches the corresponding + do_fancy_upsampling value in decompression. + +int smoothing_factor + If non-zero, the input image is smoothed; the value should be 1 for + minimal smoothing to 100 for maximum smoothing. Consult jcsample.c + for details of the smoothing algorithm. The default is zero. + +boolean write_JFIF_header + If TRUE, a JFIF APP0 marker is emitted. jpeg_set_defaults() and + jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space + (ie, YCbCr or grayscale) is selected, otherwise FALSE. + +UINT8 JFIF_major_version +UINT8 JFIF_minor_version + The version number to be written into the JFIF marker. + jpeg_set_defaults() initializes the version to 1.01 (major=minor=1). + You should set it to 1.02 (major=1, minor=2) if you plan to write + any JFIF 1.02 extension markers. + +UINT8 density_unit +UINT16 X_density +UINT16 Y_density + The resolution information to be written into the JFIF marker; + not used otherwise. density_unit may be 0 for unknown, + 1 for dots/inch, or 2 for dots/cm. The default values are 0,1,1 + indicating square pixels of unknown size. + +boolean write_Adobe_marker + If TRUE, an Adobe APP14 marker is emitted. jpeg_set_defaults() and + jpeg_set_colorspace() set this TRUE if JPEG color space RGB, CMYK, + or YCCK is selected, otherwise FALSE. It is generally a bad idea + to set both write_JFIF_header and write_Adobe_marker. In fact, + you probably shouldn't change the default settings at all --- the + default behavior ensures that the JPEG file's color space can be + recognized by the decoder. + +JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS] + Pointers to coefficient quantization tables, one per table slot, + or NULL if no table is defined for a slot. Usually these should + be set via one of the above helper routines; jpeg_add_quant_table() + is general enough to define any quantization table. The other + routines will set up table slot 0 for luminance quality and table + slot 1 for chrominance. + +int q_scale_factor[NUM_QUANT_TBLS] + Linear quantization scaling factors (percentage, initialized 100) + for use with jpeg_default_qtables(). + See rdswitch.c and cjpeg.c for an example of usage. + Note that the q_scale_factor[] fields are the "linear" scales, so you + have to convert from user-defined ratings via jpeg_quality_scaling(). + Here is an example code which corresponds to cjpeg -quality 90,70: + + jpeg_set_defaults(cinfo); + + /* Set luminance quality 90. */ + cinfo->q_scale_factor[0] = jpeg_quality_scaling(90); + /* Set chrominance quality 70. */ + cinfo->q_scale_factor[1] = jpeg_quality_scaling(70); + + jpeg_default_qtables(cinfo, force_baseline); + + CAUTION: You must also set 1x1 subsampling for efficient separate + color quality selection, since the default value used by library + is 2x2: + + cinfo->comp_info[0].v_samp_factor = 1; + cinfo->comp_info[0].h_samp_factor = 1; + +JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS] +JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS] + Pointers to Huffman coding tables, one per table slot, or NULL if + no table is defined for a slot. Slots 0 and 1 are filled with the + JPEG sample tables by jpeg_set_defaults(). If you need to allocate + more table structures, jpeg_alloc_huff_table() may be used. + Note that optimal Huffman tables can be computed for an image + by setting optimize_coding, as discussed above; there's seldom + any need to mess with providing your own Huffman tables. + + +The actual dimensions of the JPEG image that will be written to the file are +given by the following fields. These are computed from the input image +dimensions and the compression parameters by jpeg_start_compress(). You can +also call jpeg_calc_jpeg_dimensions() to obtain the values that will result +from the current parameter settings. This can be useful if you are trying +to pick a scaling ratio that will get close to a desired target size. + +JDIMENSION jpeg_width Actual dimensions of output image. +JDIMENSION jpeg_height + + +Per-component parameters are stored in the struct cinfo.comp_info[i] for +component number i. Note that components here refer to components of the +JPEG color space, *not* the source image color space. A suitably large +comp_info[] array is allocated by jpeg_set_defaults(); if you choose not +to use that routine, it's up to you to allocate the array. + +int component_id + The one-byte identifier code to be recorded in the JPEG file for + this component. For the standard color spaces, we recommend you + leave the default values alone. + +int h_samp_factor +int v_samp_factor + Horizontal and vertical sampling factors for the component; must + be 1..4 according to the JPEG standard. Note that larger sampling + factors indicate a higher-resolution component; many people find + this behavior quite unintuitive. The default values are 2,2 for + luminance components and 1,1 for chrominance components, except + for grayscale where 1,1 is used. + +int quant_tbl_no + Quantization table number for component. The default value is + 0 for luminance components and 1 for chrominance components. + +int dc_tbl_no +int ac_tbl_no + DC and AC entropy coding table numbers. The default values are + 0 for luminance components and 1 for chrominance components. + +int component_index + Must equal the component's index in comp_info[]. (Beginning in + release v6, the compressor library will fill this in automatically; + you don't have to.) + + +Decompression parameter selection +--------------------------------- + +Decompression parameter selection is somewhat simpler than compression +parameter selection, since all of the JPEG internal parameters are +recorded in the source file and need not be supplied by the application. +(Unless you are working with abbreviated files, in which case see +"Abbreviated datastreams", below.) Decompression parameters control +the postprocessing done on the image to deliver it in a format suitable +for the application's use. Many of the parameters control speed/quality +tradeoffs, in which faster decompression may be obtained at the price of +a poorer-quality image. The defaults select the highest quality (slowest) +processing. + +The following fields in the JPEG object are set by jpeg_read_header() and +may be useful to the application in choosing decompression parameters: + +JDIMENSION image_width Width and height of image +JDIMENSION image_height +int num_components Number of color components +J_COLOR_SPACE jpeg_color_space Colorspace of image +boolean saw_JFIF_marker TRUE if a JFIF APP0 marker was seen + UINT8 JFIF_major_version Version information from JFIF marker + UINT8 JFIF_minor_version + UINT8 density_unit Resolution data from JFIF marker + UINT16 X_density + UINT16 Y_density +boolean saw_Adobe_marker TRUE if an Adobe APP14 marker was seen + UINT8 Adobe_transform Color transform code from Adobe marker + +The JPEG color space, unfortunately, is something of a guess since the JPEG +standard proper does not provide a way to record it. In practice most files +adhere to the JFIF or Adobe conventions, and the decoder will recognize these +correctly. See "Special color spaces", below, for more info. + + +The decompression parameters that determine the basic properties of the +returned image are: + +J_COLOR_SPACE out_color_space + Output color space. jpeg_read_header() sets an appropriate default + based on jpeg_color_space; typically it will be RGB or grayscale. + The application can change this field to request output in a different + colorspace. For example, set it to JCS_GRAYSCALE to get grayscale + output from a color file. (This is useful for previewing: grayscale + output is faster than full color since the color components need not + be processed.) Note that not all possible color space transforms are + currently implemented; you may need to extend jdcolor.c if you want an + unusual conversion. + +unsigned int scale_num, scale_denom + Scale the image by the fraction scale_num/scale_denom. Currently, + the supported scaling ratios are M/N with all M from 1 to 16, where + N is the source DCT size, which is 8 for baseline JPEG. (The library + design allows for arbitrary scaling ratios but this is not likely + to be implemented any time soon.) The values are initialized by + jpeg_read_header() with the source DCT size. For baseline JPEG + this is 8/8. If you change only the scale_num value while leaving + the other unchanged, then this specifies the DCT scaled size to be + applied on the given input. For baseline JPEG this is equivalent + to M/8 scaling, since the source DCT size for baseline JPEG is 8. + Smaller scaling ratios permit significantly faster decoding since + fewer pixels need be processed and a simpler IDCT method can be used. + +boolean quantize_colors + If set TRUE, colormapped output will be delivered. Default is FALSE, + meaning that full-color output will be delivered. + +The next three parameters are relevant only if quantize_colors is TRUE. + +int desired_number_of_colors + Maximum number of colors to use in generating a library-supplied color + map (the actual number of colors is returned in a different field). + Default 256. Ignored when the application supplies its own color map. + +boolean two_pass_quantize + If TRUE, an extra pass over the image is made to select a custom color + map for the image. This usually looks a lot better than the one-size- + fits-all colormap that is used otherwise. Default is TRUE. Ignored + when the application supplies its own color map. + +J_DITHER_MODE dither_mode + Selects color dithering method. Supported values are: + JDITHER_NONE no dithering: fast, very low quality + JDITHER_ORDERED ordered dither: moderate speed and quality + JDITHER_FS Floyd-Steinberg dither: slow, high quality + Default is JDITHER_FS. (At present, ordered dither is implemented + only in the single-pass, standard-colormap case. If you ask for + ordered dither when two_pass_quantize is TRUE or when you supply + an external color map, you'll get F-S dithering.) + +When quantize_colors is TRUE, the target color map is described by the next +two fields. colormap is set to NULL by jpeg_read_header(). The application +can supply a color map by setting colormap non-NULL and setting +actual_number_of_colors to the map size. Otherwise, jpeg_start_decompress() +selects a suitable color map and sets these two fields itself. +[Implementation restriction: at present, an externally supplied colormap is +only accepted for 3-component output color spaces.] + +JSAMPARRAY colormap + The color map, represented as a 2-D pixel array of out_color_components + rows and actual_number_of_colors columns. Ignored if not quantizing. + CAUTION: if the JPEG library creates its own colormap, the storage + pointed to by this field is released by jpeg_finish_decompress(). + Copy the colormap somewhere else first, if you want to save it. + +int actual_number_of_colors + The number of colors in the color map. + +Additional decompression parameters that the application may set include: + +J_DCT_METHOD dct_method + Selects the algorithm used for the DCT step. Choices are the same + as described above for compression. + +boolean do_fancy_upsampling + If TRUE, use direct DCT scaling with DCT size > 8 for upsampling + of chroma components. + If FALSE, use only DCT size <= 8 and simple separate upsampling. + Default is TRUE. + For better image stability in multiple generation compression cycles + it is preferable that this value matches the corresponding + do_fancy_downsampling value in compression. + +boolean do_block_smoothing + If TRUE, interblock smoothing is applied in early stages of decoding + progressive JPEG files; if FALSE, not. Default is TRUE. Early + progression stages look "fuzzy" with smoothing, "blocky" without. + In any case, block smoothing ceases to be applied after the first few + AC coefficients are known to full accuracy, so it is relevant only + when using buffered-image mode for progressive images. + +boolean enable_1pass_quant +boolean enable_external_quant +boolean enable_2pass_quant + These are significant only in buffered-image mode, which is + described in its own section below. + + +The output image dimensions are given by the following fields. These are +computed from the source image dimensions and the decompression parameters +by jpeg_start_decompress(). You can also call jpeg_calc_output_dimensions() +to obtain the values that will result from the current parameter settings. +This can be useful if you are trying to pick a scaling ratio that will get +close to a desired target size. It's also important if you are using the +JPEG library's memory manager to allocate output buffer space, because you +are supposed to request such buffers *before* jpeg_start_decompress(). + +JDIMENSION output_width Actual dimensions of output image. +JDIMENSION output_height +int out_color_components Number of color components in out_color_space. +int output_components Number of color components returned. +int rec_outbuf_height Recommended height of scanline buffer. + +When quantizing colors, output_components is 1, indicating a single color map +index per pixel. Otherwise it equals out_color_components. The output arrays +are required to be output_width * output_components JSAMPLEs wide. + +rec_outbuf_height is the recommended minimum height (in scanlines) of the +buffer passed to jpeg_read_scanlines(). If the buffer is smaller, the +library will still work, but time will be wasted due to unnecessary data +copying. In high-quality modes, rec_outbuf_height is always 1, but some +faster, lower-quality modes set it to larger values (typically 2 to 4). +If you are going to ask for a high-speed processing mode, you may as well +go to the trouble of honoring rec_outbuf_height so as to avoid data copying. +(An output buffer larger than rec_outbuf_height lines is OK, but won't +provide any material speed improvement over that height.) + + +Special color spaces +-------------------- + +The JPEG standard itself is "color blind" and doesn't specify any particular +color space. It is customary to convert color data to a luminance/chrominance +color space before compressing, since this permits greater compression. The +existing de-facto JPEG file format standards specify YCbCr or grayscale data +(JFIF), or grayscale, RGB, YCbCr, CMYK, or YCCK (Adobe). For special +applications such as multispectral images, other color spaces can be used, +but it must be understood that such files will be unportable. + +The JPEG library can handle the most common colorspace conversions (namely +RGB <=> YCbCr and CMYK <=> YCCK). It can also deal with data of an unknown +color space, passing it through without conversion. If you deal extensively +with an unusual color space, you can easily extend the library to understand +additional color spaces and perform appropriate conversions. + +For compression, the source data's color space is specified by field +in_color_space. This is transformed to the JPEG file's color space given +by jpeg_color_space. jpeg_set_defaults() chooses a reasonable JPEG color +space depending on in_color_space, but you can override this by calling +jpeg_set_colorspace(). Of course you must select a supported transformation. +jccolor.c currently supports the following transformations: + RGB => YCbCr + RGB => GRAYSCALE + YCbCr => GRAYSCALE + CMYK => YCCK +plus the null transforms: GRAYSCALE => GRAYSCALE, RGB => RGB, +YCbCr => YCbCr, CMYK => CMYK, YCCK => YCCK, and UNKNOWN => UNKNOWN. + +The de-facto file format standards (JFIF and Adobe) specify APPn markers that +indicate the color space of the JPEG file. It is important to ensure that +these are written correctly, or omitted if the JPEG file's color space is not +one of the ones supported by the de-facto standards. jpeg_set_colorspace() +will set the compression parameters to include or omit the APPn markers +properly, so long as it is told the truth about the JPEG color space. +For example, if you are writing some random 3-component color space without +conversion, don't try to fake out the library by setting in_color_space and +jpeg_color_space to JCS_YCbCr; use JCS_UNKNOWN. You may want to write an +APPn marker of your own devising to identify the colorspace --- see "Special +markers", below. + +When told that the color space is UNKNOWN, the library will default to using +luminance-quality compression parameters for all color components. You may +well want to change these parameters. See the source code for +jpeg_set_colorspace(), in jcparam.c, for details. + +For decompression, the JPEG file's color space is given in jpeg_color_space, +and this is transformed to the output color space out_color_space. +jpeg_read_header's setting of jpeg_color_space can be relied on if the file +conforms to JFIF or Adobe conventions, but otherwise it is no better than a +guess. If you know the JPEG file's color space for certain, you can override +jpeg_read_header's guess by setting jpeg_color_space. jpeg_read_header also +selects a default output color space based on (its guess of) jpeg_color_space; +set out_color_space to override this. Again, you must select a supported +transformation. jdcolor.c currently supports + YCbCr => RGB + YCbCr => GRAYSCALE + RGB => GRAYSCALE + GRAYSCALE => RGB + YCCK => CMYK +as well as the null transforms. (Since GRAYSCALE=>RGB is provided, an +application can force grayscale JPEGs to look like color JPEGs if it only +wants to handle one case.) + +The two-pass color quantizer, jquant2.c, is specialized to handle RGB data +(it weights distances appropriately for RGB colors). You'll need to modify +the code if you want to use it for non-RGB output color spaces. Note that +jquant2.c is used to map to an application-supplied colormap as well as for +the normal two-pass colormap selection process. + +CAUTION: it appears that Adobe Photoshop writes inverted data in CMYK JPEG +files: 0 represents 100% ink coverage, rather than 0% ink as you'd expect. +This is arguably a bug in Photoshop, but if you need to work with Photoshop +CMYK files, you will have to deal with it in your application. We cannot +"fix" this in the library by inverting the data during the CMYK<=>YCCK +transform, because that would break other applications, notably Ghostscript. +Photoshop versions prior to 3.0 write EPS files containing JPEG-encoded CMYK +data in the same inverted-YCCK representation used in bare JPEG files, but +the surrounding PostScript code performs an inversion using the PS image +operator. I am told that Photoshop 3.0 will write uninverted YCCK in +EPS/JPEG files, and will omit the PS-level inversion. (But the data +polarity used in bare JPEG files will not change in 3.0.) In either case, +the JPEG library must not invert the data itself, or else Ghostscript would +read these EPS files incorrectly. + + +Error handling +-------------- + +When the default error handler is used, any error detected inside the JPEG +routines will cause a message to be printed on stderr, followed by exit(). +You can supply your own error handling routines to override this behavior +and to control the treatment of nonfatal warnings and trace/debug messages. +The file example.c illustrates the most common case, which is to have the +application regain control after an error rather than exiting. + +The JPEG library never writes any message directly; it always goes through +the error handling routines. Three classes of messages are recognized: + * Fatal errors: the library cannot continue. + * Warnings: the library can continue, but the data is corrupt, and a + damaged output image is likely to result. + * Trace/informational messages. These come with a trace level indicating + the importance of the message; you can control the verbosity of the + program by adjusting the maximum trace level that will be displayed. + +You may, if you wish, simply replace the entire JPEG error handling module +(jerror.c) with your own code. However, you can avoid code duplication by +only replacing some of the routines depending on the behavior you need. +This is accomplished by calling jpeg_std_error() as usual, but then overriding +some of the method pointers in the jpeg_error_mgr struct, as illustrated by +example.c. + +All of the error handling routines will receive a pointer to the JPEG object +(a j_common_ptr which points to either a jpeg_compress_struct or a +jpeg_decompress_struct; if you need to tell which, test the is_decompressor +field). This struct includes a pointer to the error manager struct in its +"err" field. Frequently, custom error handler routines will need to access +additional data which is not known to the JPEG library or the standard error +handler. The most convenient way to do this is to embed either the JPEG +object or the jpeg_error_mgr struct in a larger structure that contains +additional fields; then casting the passed pointer provides access to the +additional fields. Again, see example.c for one way to do it. (Beginning +with IJG version 6b, there is also a void pointer "client_data" in each +JPEG object, which the application can also use to find related data. +The library does not touch client_data at all.) + +The individual methods that you might wish to override are: + +error_exit (j_common_ptr cinfo) + Receives control for a fatal error. Information sufficient to + generate the error message has been stored in cinfo->err; call + output_message to display it. Control must NOT return to the caller; + generally this routine will exit() or longjmp() somewhere. + Typically you would override this routine to get rid of the exit() + default behavior. Note that if you continue processing, you should + clean up the JPEG object with jpeg_abort() or jpeg_destroy(). + +output_message (j_common_ptr cinfo) + Actual output of any JPEG message. Override this to send messages + somewhere other than stderr. Note that this method does not know + how to generate a message, only where to send it. + +format_message (j_common_ptr cinfo, char * buffer) + Constructs a readable error message string based on the error info + stored in cinfo->err. This method is called by output_message. Few + applications should need to override this method. One possible + reason for doing so is to implement dynamic switching of error message + language. + +emit_message (j_common_ptr cinfo, int msg_level) + Decide whether or not to emit a warning or trace message; if so, + calls output_message. The main reason for overriding this method + would be to abort on warnings. msg_level is -1 for warnings, + 0 and up for trace messages. + +Only error_exit() and emit_message() are called from the rest of the JPEG +library; the other two are internal to the error handler. + +The actual message texts are stored in an array of strings which is pointed to +by the field err->jpeg_message_table. The messages are numbered from 0 to +err->last_jpeg_message, and it is these code numbers that are used in the +JPEG library code. You could replace the message texts (for instance, with +messages in French or German) by changing the message table pointer. See +jerror.h for the default texts. CAUTION: this table will almost certainly +change or grow from one library version to the next. + +It may be useful for an application to add its own message texts that are +handled by the same mechanism. The error handler supports a second "add-on" +message table for this purpose. To define an addon table, set the pointer +err->addon_message_table and the message numbers err->first_addon_message and +err->last_addon_message. If you number the addon messages beginning at 1000 +or so, you won't have to worry about conflicts with the library's built-in +messages. See the sample applications cjpeg/djpeg for an example of using +addon messages (the addon messages are defined in cderror.h). + +Actual invocation of the error handler is done via macros defined in jerror.h: + ERREXITn(...) for fatal errors + WARNMSn(...) for corrupt-data warnings + TRACEMSn(...) for trace and informational messages. +These macros store the message code and any additional parameters into the +error handler struct, then invoke the error_exit() or emit_message() method. +The variants of each macro are for varying numbers of additional parameters. +The additional parameters are inserted into the generated message using +standard printf() format codes. + +See jerror.h and jerror.c for further details. + + +Compressed data handling (source and destination managers) +---------------------------------------------------------- + +The JPEG compression library sends its compressed data to a "destination +manager" module. The default destination manager just writes the data to a +memory buffer or to a stdio stream, but you can provide your own manager to +do something else. Similarly, the decompression library calls a "source +manager" to obtain the compressed data; you can provide your own source +manager if you want the data to come from somewhere other than a memory +buffer or a stdio stream. + +In both cases, compressed data is processed a bufferload at a time: the +destination or source manager provides a work buffer, and the library invokes +the manager only when the buffer is filled or emptied. (You could define a +one-character buffer to force the manager to be invoked for each byte, but +that would be rather inefficient.) The buffer's size and location are +controlled by the manager, not by the library. For example, the memory +source manager just makes the buffer pointer and length point to the original +data in memory. In this case the buffer-reload procedure will be invoked +only if the decompressor ran off the end of the datastream, which would +indicate an erroneous datastream. + +The work buffer is defined as an array of datatype JOCTET, which is generally +"char" or "unsigned char". On a machine where char is not exactly 8 bits +wide, you must define JOCTET as a wider data type and then modify the data +source and destination modules to transcribe the work arrays into 8-bit units +on external storage. + +A data destination manager struct contains a pointer and count defining the +next byte to write in the work buffer and the remaining free space: + + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + +The library increments the pointer and decrements the count until the buffer +is filled. The manager's empty_output_buffer method must reset the pointer +and count. The manager is expected to remember the buffer's starting address +and total size in private fields not visible to the library. + +A data destination manager provides three methods: + +init_destination (j_compress_ptr cinfo) + Initialize destination. This is called by jpeg_start_compress() + before any data is actually written. It must initialize + next_output_byte and free_in_buffer. free_in_buffer must be + initialized to a positive value. + +empty_output_buffer (j_compress_ptr cinfo) + This is called whenever the buffer has filled (free_in_buffer + reaches zero). In typical applications, it should write out the + *entire* buffer (use the saved start address and buffer length; + ignore the current state of next_output_byte and free_in_buffer). + Then reset the pointer & count to the start of the buffer, and + return TRUE indicating that the buffer has been dumped. + free_in_buffer must be set to a positive value when TRUE is + returned. A FALSE return should only be used when I/O suspension is + desired (this operating mode is discussed in the next section). + +term_destination (j_compress_ptr cinfo) + Terminate destination --- called by jpeg_finish_compress() after all + data has been written. In most applications, this must flush any + data remaining in the buffer. Use either next_output_byte or + free_in_buffer to determine how much data is in the buffer. + +term_destination() is NOT called by jpeg_abort() or jpeg_destroy(). If you +want the destination manager to be cleaned up during an abort, you must do it +yourself. + +You will also need code to create a jpeg_destination_mgr struct, fill in its +method pointers, and insert a pointer to the struct into the "dest" field of +the JPEG compression object. This can be done in-line in your setup code if +you like, but it's probably cleaner to provide a separate routine similar to +the jpeg_stdio_dest() or jpeg_mem_dest() routines of the supplied destination +managers. + +Decompression source managers follow a parallel design, but with some +additional frammishes. The source manager struct contains a pointer and count +defining the next byte to read from the work buffer and the number of bytes +remaining: + + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + +The library increments the pointer and decrements the count until the buffer +is emptied. The manager's fill_input_buffer method must reset the pointer and +count. In most applications, the manager must remember the buffer's starting +address and total size in private fields not visible to the library. + +A data source manager provides five methods: + +init_source (j_decompress_ptr cinfo) + Initialize source. This is called by jpeg_read_header() before any + data is actually read. Unlike init_destination(), it may leave + bytes_in_buffer set to 0 (in which case a fill_input_buffer() call + will occur immediately). + +fill_input_buffer (j_decompress_ptr cinfo) + This is called whenever bytes_in_buffer has reached zero and more + data is wanted. In typical applications, it should read fresh data + into the buffer (ignoring the current state of next_input_byte and + bytes_in_buffer), reset the pointer & count to the start of the + buffer, and return TRUE indicating that the buffer has been reloaded. + It is not necessary to fill the buffer entirely, only to obtain at + least one more byte. bytes_in_buffer MUST be set to a positive value + if TRUE is returned. A FALSE return should only be used when I/O + suspension is desired (this mode is discussed in the next section). + +skip_input_data (j_decompress_ptr cinfo, long num_bytes) + Skip num_bytes worth of data. The buffer pointer and count should + be advanced over num_bytes input bytes, refilling the buffer as + needed. This is used to skip over a potentially large amount of + uninteresting data (such as an APPn marker). In some applications + it may be possible to optimize away the reading of the skipped data, + but it's not clear that being smart is worth much trouble; large + skips are uncommon. bytes_in_buffer may be zero on return. + A zero or negative skip count should be treated as a no-op. + +resync_to_restart (j_decompress_ptr cinfo, int desired) + This routine is called only when the decompressor has failed to find + a restart (RSTn) marker where one is expected. Its mission is to + find a suitable point for resuming decompression. For most + applications, we recommend that you just use the default resync + procedure, jpeg_resync_to_restart(). However, if you are able to back + up in the input data stream, or if you have a-priori knowledge about + the likely location of restart markers, you may be able to do better. + Read the read_restart_marker() and jpeg_resync_to_restart() routines + in jdmarker.c if you think you'd like to implement your own resync + procedure. + +term_source (j_decompress_ptr cinfo) + Terminate source --- called by jpeg_finish_decompress() after all + data has been read. Often a no-op. + +For both fill_input_buffer() and skip_input_data(), there is no such thing +as an EOF return. If the end of the file has been reached, the routine has +a choice of exiting via ERREXIT() or inserting fake data into the buffer. +In most cases, generating a warning message and inserting a fake EOI marker +is the best course of action --- this will allow the decompressor to output +however much of the image is there. In pathological cases, the decompressor +may swallow the EOI and again demand data ... just keep feeding it fake EOIs. +jdatasrc.c illustrates the recommended error recovery behavior. + +term_source() is NOT called by jpeg_abort() or jpeg_destroy(). If you want +the source manager to be cleaned up during an abort, you must do it yourself. + +You will also need code to create a jpeg_source_mgr struct, fill in its method +pointers, and insert a pointer to the struct into the "src" field of the JPEG +decompression object. This can be done in-line in your setup code if you +like, but it's probably cleaner to provide a separate routine similar to the +jpeg_stdio_src() or jpeg_mem_src() routines of the supplied source managers. + +For more information, consult the memory and stdio source and destination +managers in jdatasrc.c and jdatadst.c. + + +I/O suspension +-------------- + +Some applications need to use the JPEG library as an incremental memory-to- +memory filter: when the compressed data buffer is filled or emptied, they want +control to return to the outer loop, rather than expecting that the buffer can +be emptied or reloaded within the data source/destination manager subroutine. +The library supports this need by providing an "I/O suspension" mode, which we +describe in this section. + +The I/O suspension mode is not a panacea: nothing is guaranteed about the +maximum amount of time spent in any one call to the library, so it will not +eliminate response-time problems in single-threaded applications. If you +need guaranteed response time, we suggest you "bite the bullet" and implement +a real multi-tasking capability. + +To use I/O suspension, cooperation is needed between the calling application +and the data source or destination manager; you will always need a custom +source/destination manager. (Please read the previous section if you haven't +already.) The basic idea is that the empty_output_buffer() or +fill_input_buffer() routine is a no-op, merely returning FALSE to indicate +that it has done nothing. Upon seeing this, the JPEG library suspends +operation and returns to its caller. The surrounding application is +responsible for emptying or refilling the work buffer before calling the +JPEG library again. + +Compression suspension: + +For compression suspension, use an empty_output_buffer() routine that returns +FALSE; typically it will not do anything else. This will cause the +compressor to return to the caller of jpeg_write_scanlines(), with the return +value indicating that not all the supplied scanlines have been accepted. +The application must make more room in the output buffer, adjust the output +buffer pointer/count appropriately, and then call jpeg_write_scanlines() +again, pointing to the first unconsumed scanline. + +When forced to suspend, the compressor will backtrack to a convenient stopping +point (usually the start of the current MCU); it will regenerate some output +data when restarted. Therefore, although empty_output_buffer() is only +called when the buffer is filled, you should NOT write out the entire buffer +after a suspension. Write only the data up to the current position of +next_output_byte/free_in_buffer. The data beyond that point will be +regenerated after resumption. + +Because of the backtracking behavior, a good-size output buffer is essential +for efficiency; you don't want the compressor to suspend often. (In fact, an +overly small buffer could lead to infinite looping, if a single MCU required +more data than would fit in the buffer.) We recommend a buffer of at least +several Kbytes. You may want to insert explicit code to ensure that you don't +call jpeg_write_scanlines() unless there is a reasonable amount of space in +the output buffer; in other words, flush the buffer before trying to compress +more data. + +The compressor does not allow suspension while it is trying to write JPEG +markers at the beginning and end of the file. This means that: + * At the beginning of a compression operation, there must be enough free + space in the output buffer to hold the header markers (typically 600 or + so bytes). The recommended buffer size is bigger than this anyway, so + this is not a problem as long as you start with an empty buffer. However, + this restriction might catch you if you insert large special markers, such + as a JFIF thumbnail image, without flushing the buffer afterwards. + * When you call jpeg_finish_compress(), there must be enough space in the + output buffer to emit any buffered data and the final EOI marker. In the + current implementation, half a dozen bytes should suffice for this, but + for safety's sake we recommend ensuring that at least 100 bytes are free + before calling jpeg_finish_compress(). + +A more significant restriction is that jpeg_finish_compress() cannot suspend. +This means you cannot use suspension with multi-pass operating modes, namely +Huffman code optimization and multiple-scan output. Those modes write the +whole file during jpeg_finish_compress(), which will certainly result in +buffer overrun. (Note that this restriction applies only to compression, +not decompression. The decompressor supports input suspension in all of its +operating modes.) + +Decompression suspension: + +For decompression suspension, use a fill_input_buffer() routine that simply +returns FALSE (except perhaps during error recovery, as discussed below). +This will cause the decompressor to return to its caller with an indication +that suspension has occurred. This can happen at four places: + * jpeg_read_header(): will return JPEG_SUSPENDED. + * jpeg_start_decompress(): will return FALSE, rather than its usual TRUE. + * jpeg_read_scanlines(): will return the number of scanlines already + completed (possibly 0). + * jpeg_finish_decompress(): will return FALSE, rather than its usual TRUE. +The surrounding application must recognize these cases, load more data into +the input buffer, and repeat the call. In the case of jpeg_read_scanlines(), +increment the passed pointers past any scanlines successfully read. + +Just as with compression, the decompressor will typically backtrack to a +convenient restart point before suspending. When fill_input_buffer() is +called, next_input_byte/bytes_in_buffer point to the current restart point, +which is where the decompressor will backtrack to if FALSE is returned. +The data beyond that position must NOT be discarded if you suspend; it needs +to be re-read upon resumption. In most implementations, you'll need to shift +this data down to the start of your work buffer and then load more data after +it. Again, this behavior means that a several-Kbyte work buffer is essential +for decent performance; furthermore, you should load a reasonable amount of +new data before resuming decompression. (If you loaded, say, only one new +byte each time around, you could waste a LOT of cycles.) + +The skip_input_data() source manager routine requires special care in a +suspension scenario. This routine is NOT granted the ability to suspend the +decompressor; it can decrement bytes_in_buffer to zero, but no more. If the +requested skip distance exceeds the amount of data currently in the input +buffer, then skip_input_data() must set bytes_in_buffer to zero and record the +additional skip distance somewhere else. The decompressor will immediately +call fill_input_buffer(), which should return FALSE, which will cause a +suspension return. The surrounding application must then arrange to discard +the recorded number of bytes before it resumes loading the input buffer. +(Yes, this design is rather baroque, but it avoids complexity in the far more +common case where a non-suspending source manager is used.) + +If the input data has been exhausted, we recommend that you emit a warning +and insert dummy EOI markers just as a non-suspending data source manager +would do. This can be handled either in the surrounding application logic or +within fill_input_buffer(); the latter is probably more efficient. If +fill_input_buffer() knows that no more data is available, it can set the +pointer/count to point to a dummy EOI marker and then return TRUE just as +though it had read more data in a non-suspending situation. + +The decompressor does not attempt to suspend within standard JPEG markers; +instead it will backtrack to the start of the marker and reprocess the whole +marker next time. Hence the input buffer must be large enough to hold the +longest standard marker in the file. Standard JPEG markers should normally +not exceed a few hundred bytes each (DHT tables are typically the longest). +We recommend at least a 2K buffer for performance reasons, which is much +larger than any correct marker is likely to be. For robustness against +damaged marker length counts, you may wish to insert a test in your +application for the case that the input buffer is completely full and yet +the decoder has suspended without consuming any data --- otherwise, if this +situation did occur, it would lead to an endless loop. (The library can't +provide this test since it has no idea whether "the buffer is full", or +even whether there is a fixed-size input buffer.) + +The input buffer would need to be 64K to allow for arbitrary COM or APPn +markers, but these are handled specially: they are either saved into allocated +memory, or skipped over by calling skip_input_data(). In the former case, +suspension is handled correctly, and in the latter case, the problem of +buffer overrun is placed on skip_input_data's shoulders, as explained above. +Note that if you provide your own marker handling routine for large markers, +you should consider how to deal with buffer overflow. + +Multiple-buffer management: + +In some applications it is desirable to store the compressed data in a linked +list of buffer areas, so as to avoid data copying. This can be handled by +having empty_output_buffer() or fill_input_buffer() set the pointer and count +to reference the next available buffer; FALSE is returned only if no more +buffers are available. Although seemingly straightforward, there is a +pitfall in this approach: the backtrack that occurs when FALSE is returned +could back up into an earlier buffer. For example, when fill_input_buffer() +is called, the current pointer & count indicate the backtrack restart point. +Since fill_input_buffer() will set the pointer and count to refer to a new +buffer, the restart position must be saved somewhere else. Suppose a second +call to fill_input_buffer() occurs in the same library call, and no +additional input data is available, so fill_input_buffer must return FALSE. +If the JPEG library has not moved the pointer/count forward in the current +buffer, then *the correct restart point is the saved position in the prior +buffer*. Prior buffers may be discarded only after the library establishes +a restart point within a later buffer. Similar remarks apply for output into +a chain of buffers. + +The library will never attempt to backtrack over a skip_input_data() call, +so any skipped data can be permanently discarded. You still have to deal +with the case of skipping not-yet-received data, however. + +It's much simpler to use only a single buffer; when fill_input_buffer() is +called, move any unconsumed data (beyond the current pointer/count) down to +the beginning of this buffer and then load new data into the remaining buffer +space. This approach requires a little more data copying but is far easier +to get right. + + +Progressive JPEG support +------------------------ + +Progressive JPEG rearranges the stored data into a series of scans of +increasing quality. In situations where a JPEG file is transmitted across a +slow communications link, a decoder can generate a low-quality image very +quickly from the first scan, then gradually improve the displayed quality as +more scans are received. The final image after all scans are complete is +identical to that of a regular (sequential) JPEG file of the same quality +setting. Progressive JPEG files are often slightly smaller than equivalent +sequential JPEG files, but the possibility of incremental display is the main +reason for using progressive JPEG. + +The IJG encoder library generates progressive JPEG files when given a +suitable "scan script" defining how to divide the data into scans. +Creation of progressive JPEG files is otherwise transparent to the encoder. +Progressive JPEG files can also be read transparently by the decoder library. +If the decoding application simply uses the library as defined above, it +will receive a final decoded image without any indication that the file was +progressive. Of course, this approach does not allow incremental display. +To perform incremental display, an application needs to use the decoder +library's "buffered-image" mode, in which it receives a decoded image +multiple times. + +Each displayed scan requires about as much work to decode as a full JPEG +image of the same size, so the decoder must be fairly fast in relation to the +data transmission rate in order to make incremental display useful. However, +it is possible to skip displaying the image and simply add the incoming bits +to the decoder's coefficient buffer. This is fast because only Huffman +decoding need be done, not IDCT, upsampling, colorspace conversion, etc. +The IJG decoder library allows the application to switch dynamically between +displaying the image and simply absorbing the incoming bits. A properly +coded application can automatically adapt the number of display passes to +suit the time available as the image is received. Also, a final +higher-quality display cycle can be performed from the buffered data after +the end of the file is reached. + +Progressive compression: + +To create a progressive JPEG file (or a multiple-scan sequential JPEG file), +set the scan_info cinfo field to point to an array of scan descriptors, and +perform compression as usual. Instead of constructing your own scan list, +you can call the jpeg_simple_progression() helper routine to create a +recommended progression sequence; this method should be used by all +applications that don't want to get involved in the nitty-gritty of +progressive scan sequence design. (If you want to provide user control of +scan sequences, you may wish to borrow the scan script reading code found +in rdswitch.c, so that you can read scan script files just like cjpeg's.) +When scan_info is not NULL, the compression library will store DCT'd data +into a buffer array as jpeg_write_scanlines() is called, and will emit all +the requested scans during jpeg_finish_compress(). This implies that +multiple-scan output cannot be created with a suspending data destination +manager, since jpeg_finish_compress() does not support suspension. We +should also note that the compressor currently forces Huffman optimization +mode when creating a progressive JPEG file, because the default Huffman +tables are unsuitable for progressive files. + +Progressive decompression: + +When buffered-image mode is not used, the decoder library will read all of +a multi-scan file during jpeg_start_decompress(), so that it can provide a +final decoded image. (Here "multi-scan" means either progressive or +multi-scan sequential.) This makes multi-scan files transparent to the +decoding application. However, existing applications that used suspending +input with version 5 of the IJG library will need to be modified to check +for a suspension return from jpeg_start_decompress(). + +To perform incremental display, an application must use the library's +buffered-image mode. This is described in the next section. + + +Buffered-image mode +------------------- + +In buffered-image mode, the library stores the partially decoded image in a +coefficient buffer, from which it can be read out as many times as desired. +This mode is typically used for incremental display of progressive JPEG files, +but it can be used with any JPEG file. Each scan of a progressive JPEG file +adds more data (more detail) to the buffered image. The application can +display in lockstep with the source file (one display pass per input scan), +or it can allow input processing to outrun display processing. By making +input and display processing run independently, it is possible for the +application to adapt progressive display to a wide range of data transmission +rates. + +The basic control flow for buffered-image decoding is + + jpeg_create_decompress() + set data source + jpeg_read_header() + set overall decompression parameters + cinfo.buffered_image = TRUE; /* select buffered-image mode */ + jpeg_start_decompress() + for (each output pass) { + adjust output decompression parameters if required + jpeg_start_output() /* start a new output pass */ + for (all scanlines in image) { + jpeg_read_scanlines() + display scanlines + } + jpeg_finish_output() /* terminate output pass */ + } + jpeg_finish_decompress() + jpeg_destroy_decompress() + +This differs from ordinary unbuffered decoding in that there is an additional +level of looping. The application can choose how many output passes to make +and how to display each pass. + +The simplest approach to displaying progressive images is to do one display +pass for each scan appearing in the input file. In this case the outer loop +condition is typically + while (! jpeg_input_complete(&cinfo)) +and the start-output call should read + jpeg_start_output(&cinfo, cinfo.input_scan_number); +The second parameter to jpeg_start_output() indicates which scan of the input +file is to be displayed; the scans are numbered starting at 1 for this +purpose. (You can use a loop counter starting at 1 if you like, but using +the library's input scan counter is easier.) The library automatically reads +data as necessary to complete each requested scan, and jpeg_finish_output() +advances to the next scan or end-of-image marker (hence input_scan_number +will be incremented by the time control arrives back at jpeg_start_output()). +With this technique, data is read from the input file only as needed, and +input and output processing run in lockstep. + +After reading the final scan and reaching the end of the input file, the +buffered image remains available; it can be read additional times by +repeating the jpeg_start_output()/jpeg_read_scanlines()/jpeg_finish_output() +sequence. For example, a useful technique is to use fast one-pass color +quantization for display passes made while the image is arriving, followed by +a final display pass using two-pass quantization for highest quality. This +is done by changing the library parameters before the final output pass. +Changing parameters between passes is discussed in detail below. + +In general the last scan of a progressive file cannot be recognized as such +until after it is read, so a post-input display pass is the best approach if +you want special processing in the final pass. + +When done with the image, be sure to call jpeg_finish_decompress() to release +the buffered image (or just use jpeg_destroy_decompress()). + +If input data arrives faster than it can be displayed, the application can +cause the library to decode input data in advance of what's needed to produce +output. This is done by calling the routine jpeg_consume_input(). +The return value is one of the following: + JPEG_REACHED_SOS: reached an SOS marker (the start of a new scan) + JPEG_REACHED_EOI: reached the EOI marker (end of image) + JPEG_ROW_COMPLETED: completed reading one MCU row of compressed data + JPEG_SCAN_COMPLETED: completed reading last MCU row of current scan + JPEG_SUSPENDED: suspended before completing any of the above +(JPEG_SUSPENDED can occur only if a suspending data source is used.) This +routine can be called at any time after initializing the JPEG object. It +reads some additional data and returns when one of the indicated significant +events occurs. (If called after the EOI marker is reached, it will +immediately return JPEG_REACHED_EOI without attempting to read more data.) + +The library's output processing will automatically call jpeg_consume_input() +whenever the output processing overtakes the input; thus, simple lockstep +display requires no direct calls to jpeg_consume_input(). But by adding +calls to jpeg_consume_input(), you can absorb data in advance of what is +being displayed. This has two benefits: + * You can limit buildup of unprocessed data in your input buffer. + * You can eliminate extra display passes by paying attention to the + state of the library's input processing. + +The first of these benefits only requires interspersing calls to +jpeg_consume_input() with your display operations and any other processing +you may be doing. To avoid wasting cycles due to backtracking, it's best to +call jpeg_consume_input() only after a hundred or so new bytes have arrived. +This is discussed further under "I/O suspension", above. (Note: the JPEG +library currently is not thread-safe. You must not call jpeg_consume_input() +from one thread of control if a different library routine is working on the +same JPEG object in another thread.) + +When input arrives fast enough that more than one new scan is available +before you start a new output pass, you may as well skip the output pass +corresponding to the completed scan. This occurs for free if you pass +cinfo.input_scan_number as the target scan number to jpeg_start_output(). +The input_scan_number field is simply the index of the scan currently being +consumed by the input processor. You can ensure that this is up-to-date by +emptying the input buffer just before calling jpeg_start_output(): call +jpeg_consume_input() repeatedly until it returns JPEG_SUSPENDED or +JPEG_REACHED_EOI. + +The target scan number passed to jpeg_start_output() is saved in the +cinfo.output_scan_number field. The library's output processing calls +jpeg_consume_input() whenever the current input scan number and row within +that scan is less than or equal to the current output scan number and row. +Thus, input processing can "get ahead" of the output processing but is not +allowed to "fall behind". You can achieve several different effects by +manipulating this interlock rule. For example, if you pass a target scan +number greater than the current input scan number, the output processor will +wait until that scan starts to arrive before producing any output. (To avoid +an infinite loop, the target scan number is automatically reset to the last +scan number when the end of image is reached. Thus, if you specify a large +target scan number, the library will just absorb the entire input file and +then perform an output pass. This is effectively the same as what +jpeg_start_decompress() does when you don't select buffered-image mode.) +When you pass a target scan number equal to the current input scan number, +the image is displayed no faster than the current input scan arrives. The +final possibility is to pass a target scan number less than the current input +scan number; this disables the input/output interlock and causes the output +processor to simply display whatever it finds in the image buffer, without +waiting for input. (However, the library will not accept a target scan +number less than one, so you can't avoid waiting for the first scan.) + +When data is arriving faster than the output display processing can advance +through the image, jpeg_consume_input() will store data into the buffered +image beyond the point at which the output processing is reading data out +again. If the input arrives fast enough, it may "wrap around" the buffer to +the point where the input is more than one whole scan ahead of the output. +If the output processing simply proceeds through its display pass without +paying attention to the input, the effect seen on-screen is that the lower +part of the image is one or more scans better in quality than the upper part. +Then, when the next output scan is started, you have a choice of what target +scan number to use. The recommended choice is to use the current input scan +number at that time, which implies that you've skipped the output scans +corresponding to the input scans that were completed while you processed the +previous output scan. In this way, the decoder automatically adapts its +speed to the arriving data, by skipping output scans as necessary to keep up +with the arriving data. + +When using this strategy, you'll want to be sure that you perform a final +output pass after receiving all the data; otherwise your last display may not +be full quality across the whole screen. So the right outer loop logic is +something like this: + do { + absorb any waiting input by calling jpeg_consume_input() + final_pass = jpeg_input_complete(&cinfo); + adjust output decompression parameters if required + jpeg_start_output(&cinfo, cinfo.input_scan_number); + ... + jpeg_finish_output() + } while (! final_pass); +rather than quitting as soon as jpeg_input_complete() returns TRUE. This +arrangement makes it simple to use higher-quality decoding parameters +for the final pass. But if you don't want to use special parameters for +the final pass, the right loop logic is like this: + for (;;) { + absorb any waiting input by calling jpeg_consume_input() + jpeg_start_output(&cinfo, cinfo.input_scan_number); + ... + jpeg_finish_output() + if (jpeg_input_complete(&cinfo) && + cinfo.input_scan_number == cinfo.output_scan_number) + break; + } +In this case you don't need to know in advance whether an output pass is to +be the last one, so it's not necessary to have reached EOF before starting +the final output pass; rather, what you want to test is whether the output +pass was performed in sync with the final input scan. This form of the loop +will avoid an extra output pass whenever the decoder is able (or nearly able) +to keep up with the incoming data. + +When the data transmission speed is high, you might begin a display pass, +then find that much or all of the file has arrived before you can complete +the pass. (You can detect this by noting the JPEG_REACHED_EOI return code +from jpeg_consume_input(), or equivalently by testing jpeg_input_complete().) +In this situation you may wish to abort the current display pass and start a +new one using the newly arrived information. To do so, just call +jpeg_finish_output() and then start a new pass with jpeg_start_output(). + +A variant strategy is to abort and restart display if more than one complete +scan arrives during an output pass; this can be detected by noting +JPEG_REACHED_SOS returns and/or examining cinfo.input_scan_number. This +idea should be employed with caution, however, since the display process +might never get to the bottom of the image before being aborted, resulting +in the lower part of the screen being several passes worse than the upper. +In most cases it's probably best to abort an output pass only if the whole +file has arrived and you want to begin the final output pass immediately. + +When receiving data across a communication link, we recommend always using +the current input scan number for the output target scan number; if a +higher-quality final pass is to be done, it should be started (aborting any +incomplete output pass) as soon as the end of file is received. However, +many other strategies are possible. For example, the application can examine +the parameters of the current input scan and decide whether to display it or +not. If the scan contains only chroma data, one might choose not to use it +as the target scan, expecting that the scan will be small and will arrive +quickly. To skip to the next scan, call jpeg_consume_input() until it +returns JPEG_REACHED_SOS or JPEG_REACHED_EOI. Or just use the next higher +number as the target scan for jpeg_start_output(); but that method doesn't +let you inspect the next scan's parameters before deciding to display it. + + +In buffered-image mode, jpeg_start_decompress() never performs input and +thus never suspends. An application that uses input suspension with +buffered-image mode must be prepared for suspension returns from these +routines: +* jpeg_start_output() performs input only if you request 2-pass quantization + and the target scan isn't fully read yet. (This is discussed below.) +* jpeg_read_scanlines(), as always, returns the number of scanlines that it + was able to produce before suspending. +* jpeg_finish_output() will read any markers following the target scan, + up to the end of the file or the SOS marker that begins another scan. + (But it reads no input if jpeg_consume_input() has already reached the + end of the file or a SOS marker beyond the target output scan.) +* jpeg_finish_decompress() will read until the end of file, and thus can + suspend if the end hasn't already been reached (as can be tested by + calling jpeg_input_complete()). +jpeg_start_output(), jpeg_finish_output(), and jpeg_finish_decompress() +all return TRUE if they completed their tasks, FALSE if they had to suspend. +In the event of a FALSE return, the application must load more input data +and repeat the call. Applications that use non-suspending data sources need +not check the return values of these three routines. + + +It is possible to change decoding parameters between output passes in the +buffered-image mode. The decoder library currently supports only very +limited changes of parameters. ONLY THE FOLLOWING parameter changes are +allowed after jpeg_start_decompress() is called: +* dct_method can be changed before each call to jpeg_start_output(). + For example, one could use a fast DCT method for early scans, changing + to a higher quality method for the final scan. +* dither_mode can be changed before each call to jpeg_start_output(); + of course this has no impact if not using color quantization. Typically + one would use ordered dither for initial passes, then switch to + Floyd-Steinberg dither for the final pass. Caution: changing dither mode + can cause more memory to be allocated by the library. Although the amount + of memory involved is not large (a scanline or so), it may cause the + initial max_memory_to_use specification to be exceeded, which in the worst + case would result in an out-of-memory failure. +* do_block_smoothing can be changed before each call to jpeg_start_output(). + This setting is relevant only when decoding a progressive JPEG image. + During the first DC-only scan, block smoothing provides a very "fuzzy" look + instead of the very "blocky" look seen without it; which is better seems a + matter of personal taste. But block smoothing is nearly always a win + during later stages, especially when decoding a successive-approximation + image: smoothing helps to hide the slight blockiness that otherwise shows + up on smooth gradients until the lowest coefficient bits are sent. +* Color quantization mode can be changed under the rules described below. + You *cannot* change between full-color and quantized output (because that + would alter the required I/O buffer sizes), but you can change which + quantization method is used. + +When generating color-quantized output, changing quantization method is a +very useful way of switching between high-speed and high-quality display. +The library allows you to change among its three quantization methods: +1. Single-pass quantization to a fixed color cube. + Selected by cinfo.two_pass_quantize = FALSE and cinfo.colormap = NULL. +2. Single-pass quantization to an application-supplied colormap. + Selected by setting cinfo.colormap to point to the colormap (the value of + two_pass_quantize is ignored); also set cinfo.actual_number_of_colors. +3. Two-pass quantization to a colormap chosen specifically for the image. + Selected by cinfo.two_pass_quantize = TRUE and cinfo.colormap = NULL. + (This is the default setting selected by jpeg_read_header, but it is + probably NOT what you want for the first pass of progressive display!) +These methods offer successively better quality and lesser speed. However, +only the first method is available for quantizing in non-RGB color spaces. + +IMPORTANT: because the different quantizer methods have very different +working-storage requirements, the library requires you to indicate which +one(s) you intend to use before you call jpeg_start_decompress(). (If we did +not require this, the max_memory_to_use setting would be a complete fiction.) +You do this by setting one or more of these three cinfo fields to TRUE: + enable_1pass_quant Fixed color cube colormap + enable_external_quant Externally-supplied colormap + enable_2pass_quant Two-pass custom colormap +All three are initialized FALSE by jpeg_read_header(). But +jpeg_start_decompress() automatically sets TRUE the one selected by the +current two_pass_quantize and colormap settings, so you only need to set the +enable flags for any other quantization methods you plan to change to later. + +After setting the enable flags correctly at jpeg_start_decompress() time, you +can change to any enabled quantization method by setting two_pass_quantize +and colormap properly just before calling jpeg_start_output(). The following +special rules apply: +1. You must explicitly set cinfo.colormap to NULL when switching to 1-pass + or 2-pass mode from a different mode, or when you want the 2-pass + quantizer to be re-run to generate a new colormap. +2. To switch to an external colormap, or to change to a different external + colormap than was used on the prior pass, you must call + jpeg_new_colormap() after setting cinfo.colormap. +NOTE: if you want to use the same colormap as was used in the prior pass, +you should not do either of these things. This will save some nontrivial +switchover costs. +(These requirements exist because cinfo.colormap will always be non-NULL +after completing a prior output pass, since both the 1-pass and 2-pass +quantizers set it to point to their output colormaps. Thus you have to +do one of these two things to notify the library that something has changed. +Yup, it's a bit klugy, but it's necessary to do it this way for backwards +compatibility.) + +Note that in buffered-image mode, the library generates any requested colormap +during jpeg_start_output(), not during jpeg_start_decompress(). + +When using two-pass quantization, jpeg_start_output() makes a pass over the +buffered image to determine the optimum color map; it therefore may take a +significant amount of time, whereas ordinarily it does little work. The +progress monitor hook is called during this pass, if defined. It is also +important to realize that if the specified target scan number is greater than +or equal to the current input scan number, jpeg_start_output() will attempt +to consume input as it makes this pass. If you use a suspending data source, +you need to check for a FALSE return from jpeg_start_output() under these +conditions. The combination of 2-pass quantization and a not-yet-fully-read +target scan is the only case in which jpeg_start_output() will consume input. + + +Application authors who support buffered-image mode may be tempted to use it +for all JPEG images, even single-scan ones. This will work, but it is +inefficient: there is no need to create an image-sized coefficient buffer for +single-scan images. Requesting buffered-image mode for such an image wastes +memory. Worse, it can cost time on large images, since the buffered data has +to be swapped out or written to a temporary file. If you are concerned about +maximum performance on baseline JPEG files, you should use buffered-image +mode only when the incoming file actually has multiple scans. This can be +tested by calling jpeg_has_multiple_scans(), which will return a correct +result at any time after jpeg_read_header() completes. + +It is also worth noting that when you use jpeg_consume_input() to let input +processing get ahead of output processing, the resulting pattern of access to +the coefficient buffer is quite nonsequential. It's best to use the memory +manager jmemnobs.c if you can (ie, if you have enough real or virtual main +memory). If not, at least make sure that max_memory_to_use is set as high as +possible. If the JPEG memory manager has to use a temporary file, you will +probably see a lot of disk traffic and poor performance. (This could be +improved with additional work on the memory manager, but we haven't gotten +around to it yet.) + +In some applications it may be convenient to use jpeg_consume_input() for all +input processing, including reading the initial markers; that is, you may +wish to call jpeg_consume_input() instead of jpeg_read_header() during +startup. This works, but note that you must check for JPEG_REACHED_SOS and +JPEG_REACHED_EOI return codes as the equivalent of jpeg_read_header's codes. +Once the first SOS marker has been reached, you must call +jpeg_start_decompress() before jpeg_consume_input() will consume more input; +it'll just keep returning JPEG_REACHED_SOS until you do. If you read a +tables-only file this way, jpeg_consume_input() will return JPEG_REACHED_EOI +without ever returning JPEG_REACHED_SOS; be sure to check for this case. +If this happens, the decompressor will not read any more input until you call +jpeg_abort() to reset it. It is OK to call jpeg_consume_input() even when not +using buffered-image mode, but in that case it's basically a no-op after the +initial markers have been read: it will just return JPEG_SUSPENDED. + + +Abbreviated datastreams and multiple images +------------------------------------------- + +A JPEG compression or decompression object can be reused to process multiple +images. This saves a small amount of time per image by eliminating the +"create" and "destroy" operations, but that isn't the real purpose of the +feature. Rather, reuse of an object provides support for abbreviated JPEG +datastreams. Object reuse can also simplify processing a series of images in +a single input or output file. This section explains these features. + +A JPEG file normally contains several hundred bytes worth of quantization +and Huffman tables. In a situation where many images will be stored or +transmitted with identical tables, this may represent an annoying overhead. +The JPEG standard therefore permits tables to be omitted. The standard +defines three classes of JPEG datastreams: + * "Interchange" datastreams contain an image and all tables needed to decode + the image. These are the usual kind of JPEG file. + * "Abbreviated image" datastreams contain an image, but are missing some or + all of the tables needed to decode that image. + * "Abbreviated table specification" (henceforth "tables-only") datastreams + contain only table specifications. +To decode an abbreviated image, it is necessary to load the missing table(s) +into the decoder beforehand. This can be accomplished by reading a separate +tables-only file. A variant scheme uses a series of images in which the first +image is an interchange (complete) datastream, while subsequent ones are +abbreviated and rely on the tables loaded by the first image. It is assumed +that once the decoder has read a table, it will remember that table until a +new definition for the same table number is encountered. + +It is the application designer's responsibility to figure out how to associate +the correct tables with an abbreviated image. While abbreviated datastreams +can be useful in a closed environment, their use is strongly discouraged in +any situation where data exchange with other applications might be needed. +Caveat designer. + +The JPEG library provides support for reading and writing any combination of +tables-only datastreams and abbreviated images. In both compression and +decompression objects, a quantization or Huffman table will be retained for +the lifetime of the object, unless it is overwritten by a new table definition. + + +To create abbreviated image datastreams, it is only necessary to tell the +compressor not to emit some or all of the tables it is using. Each +quantization and Huffman table struct contains a boolean field "sent_table", +which normally is initialized to FALSE. For each table used by the image, the +header-writing process emits the table and sets sent_table = TRUE unless it is +already TRUE. (In normal usage, this prevents outputting the same table +definition multiple times, as would otherwise occur because the chroma +components typically share tables.) Thus, setting this field to TRUE before +calling jpeg_start_compress() will prevent the table from being written at +all. + +If you want to create a "pure" abbreviated image file containing no tables, +just call "jpeg_suppress_tables(&cinfo, TRUE)" after constructing all the +tables. If you want to emit some but not all tables, you'll need to set the +individual sent_table fields directly. + +To create an abbreviated image, you must also call jpeg_start_compress() +with a second parameter of FALSE, not TRUE. Otherwise jpeg_start_compress() +will force all the sent_table fields to FALSE. (This is a safety feature to +prevent abbreviated images from being created accidentally.) + +To create a tables-only file, perform the same parameter setup that you +normally would, but instead of calling jpeg_start_compress() and so on, call +jpeg_write_tables(&cinfo). This will write an abbreviated datastream +containing only SOI, DQT and/or DHT markers, and EOI. All the quantization +and Huffman tables that are currently defined in the compression object will +be emitted unless their sent_tables flag is already TRUE, and then all the +sent_tables flags will be set TRUE. + +A sure-fire way to create matching tables-only and abbreviated image files +is to proceed as follows: + + create JPEG compression object + set JPEG parameters + set destination to tables-only file + jpeg_write_tables(&cinfo); + set destination to image file + jpeg_start_compress(&cinfo, FALSE); + write data... + jpeg_finish_compress(&cinfo); + +Since the JPEG parameters are not altered between writing the table file and +the abbreviated image file, the same tables are sure to be used. Of course, +you can repeat the jpeg_start_compress() ... jpeg_finish_compress() sequence +many times to produce many abbreviated image files matching the table file. + +You cannot suppress output of the computed Huffman tables when Huffman +optimization is selected. (If you could, there'd be no way to decode the +image...) Generally, you don't want to set optimize_coding = TRUE when +you are trying to produce abbreviated files. + +In some cases you might want to compress an image using tables which are +not stored in the application, but are defined in an interchange or +tables-only file readable by the application. This can be done by setting up +a JPEG decompression object to read the specification file, then copying the +tables into your compression object. See jpeg_copy_critical_parameters() +for an example of copying quantization tables. + + +To read abbreviated image files, you simply need to load the proper tables +into the decompression object before trying to read the abbreviated image. +If the proper tables are stored in the application program, you can just +allocate the table structs and fill in their contents directly. For example, +to load a fixed quantization table into table slot "n": + + if (cinfo.quant_tbl_ptrs[n] == NULL) + cinfo.quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) &cinfo); + quant_ptr = cinfo.quant_tbl_ptrs[n]; /* quant_ptr is JQUANT_TBL* */ + for (i = 0; i < 64; i++) { + /* Qtable[] is desired quantization table, in natural array order */ + quant_ptr->quantval[i] = Qtable[i]; + } + +Code to load a fixed Huffman table is typically (for AC table "n"): + + if (cinfo.ac_huff_tbl_ptrs[n] == NULL) + cinfo.ac_huff_tbl_ptrs[n] = jpeg_alloc_huff_table((j_common_ptr) &cinfo); + huff_ptr = cinfo.ac_huff_tbl_ptrs[n]; /* huff_ptr is JHUFF_TBL* */ + for (i = 1; i <= 16; i++) { + /* counts[i] is number of Huffman codes of length i bits, i=1..16 */ + huff_ptr->bits[i] = counts[i]; + } + for (i = 0; i < 256; i++) { + /* symbols[] is the list of Huffman symbols, in code-length order */ + huff_ptr->huffval[i] = symbols[i]; + } + +(Note that trying to set cinfo.quant_tbl_ptrs[n] to point directly at a +constant JQUANT_TBL object is not safe. If the incoming file happened to +contain a quantization table definition, your master table would get +overwritten! Instead allocate a working table copy and copy the master table +into it, as illustrated above. Ditto for Huffman tables, of course.) + +You might want to read the tables from a tables-only file, rather than +hard-wiring them into your application. The jpeg_read_header() call is +sufficient to read a tables-only file. You must pass a second parameter of +FALSE to indicate that you do not require an image to be present. Thus, the +typical scenario is + + create JPEG decompression object + set source to tables-only file + jpeg_read_header(&cinfo, FALSE); + set source to abbreviated image file + jpeg_read_header(&cinfo, TRUE); + set decompression parameters + jpeg_start_decompress(&cinfo); + read data... + jpeg_finish_decompress(&cinfo); + +In some cases, you may want to read a file without knowing whether it contains +an image or just tables. In that case, pass FALSE and check the return value +from jpeg_read_header(): it will be JPEG_HEADER_OK if an image was found, +JPEG_HEADER_TABLES_ONLY if only tables were found. (A third return value, +JPEG_SUSPENDED, is possible when using a suspending data source manager.) +Note that jpeg_read_header() will not complain if you read an abbreviated +image for which you haven't loaded the missing tables; the missing-table check +occurs later, in jpeg_start_decompress(). + + +It is possible to read a series of images from a single source file by +repeating the jpeg_read_header() ... jpeg_finish_decompress() sequence, +without releasing/recreating the JPEG object or the data source module. +(If you did reinitialize, any partial bufferload left in the data source +buffer at the end of one image would be discarded, causing you to lose the +start of the next image.) When you use this method, stored tables are +automatically carried forward, so some of the images can be abbreviated images +that depend on tables from earlier images. + +If you intend to write a series of images into a single destination file, +you might want to make a specialized data destination module that doesn't +flush the output buffer at term_destination() time. This would speed things +up by some trifling amount. Of course, you'd need to remember to flush the +buffer after the last image. You can make the later images be abbreviated +ones by passing FALSE to jpeg_start_compress(). + + +Special markers +--------------- + +Some applications may need to insert or extract special data in the JPEG +datastream. The JPEG standard provides marker types "COM" (comment) and +"APP0" through "APP15" (application) to hold application-specific data. +Unfortunately, the use of these markers is not specified by the standard. +COM markers are fairly widely used to hold user-supplied text. The JFIF file +format spec uses APP0 markers with specified initial strings to hold certain +data. Adobe applications use APP14 markers beginning with the string "Adobe" +for miscellaneous data. Other APPn markers are rarely seen, but might +contain almost anything. + +If you wish to store user-supplied text, we recommend you use COM markers +and place readable 7-bit ASCII text in them. Newline conventions are not +standardized --- expect to find LF (Unix style), CR/LF (DOS style), or CR +(Mac style). A robust COM reader should be able to cope with random binary +garbage, including nulls, since some applications generate COM markers +containing non-ASCII junk. (But yours should not be one of them.) + +For program-supplied data, use an APPn marker, and be sure to begin it with an +identifying string so that you can tell whether the marker is actually yours. +It's probably best to avoid using APP0 or APP14 for any private markers. +(NOTE: the upcoming SPIFF standard will use APP8 markers; we recommend you +not use APP8 markers for any private purposes, either.) + +Keep in mind that at most 65533 bytes can be put into one marker, but you +can have as many markers as you like. + +By default, the IJG compression library will write a JFIF APP0 marker if the +selected JPEG colorspace is grayscale or YCbCr, or an Adobe APP14 marker if +the selected colorspace is RGB, CMYK, or YCCK. You can disable this, but +we don't recommend it. The decompression library will recognize JFIF and +Adobe markers and will set the JPEG colorspace properly when one is found. + + +You can write special markers immediately following the datastream header by +calling jpeg_write_marker() after jpeg_start_compress() and before the first +call to jpeg_write_scanlines(). When you do this, the markers appear after +the SOI and the JFIF APP0 and Adobe APP14 markers (if written), but before +all else. Specify the marker type parameter as "JPEG_COM" for COM or +"JPEG_APP0 + n" for APPn. (Actually, jpeg_write_marker will let you write +any marker type, but we don't recommend writing any other kinds of marker.) +For example, to write a user comment string pointed to by comment_text: + jpeg_write_marker(cinfo, JPEG_COM, comment_text, strlen(comment_text)); + +If it's not convenient to store all the marker data in memory at once, +you can instead call jpeg_write_m_header() followed by multiple calls to +jpeg_write_m_byte(). If you do it this way, it's your responsibility to +call jpeg_write_m_byte() exactly the number of times given in the length +parameter to jpeg_write_m_header(). (This method lets you empty the +output buffer partway through a marker, which might be important when +using a suspending data destination module. In any case, if you are using +a suspending destination, you should flush its buffer after inserting +any special markers. See "I/O suspension".) + +Or, if you prefer to synthesize the marker byte sequence yourself, +you can just cram it straight into the data destination module. + +If you are writing JFIF 1.02 extension markers (thumbnail images), don't +forget to set cinfo.JFIF_minor_version = 2 so that the encoder will write the +correct JFIF version number in the JFIF header marker. The library's default +is to write version 1.01, but that's wrong if you insert any 1.02 extension +markers. (We could probably get away with just defaulting to 1.02, but there +used to be broken decoders that would complain about unknown minor version +numbers. To reduce compatibility risks it's safest not to write 1.02 unless +you are actually using 1.02 extensions.) + + +When reading, two methods of handling special markers are available: +1. You can ask the library to save the contents of COM and/or APPn markers +into memory, and then examine them at your leisure afterwards. +2. You can supply your own routine to process COM and/or APPn markers +on-the-fly as they are read. +The first method is simpler to use, especially if you are using a suspending +data source; writing a marker processor that copes with input suspension is +not easy (consider what happens if the marker is longer than your available +input buffer). However, the second method conserves memory since the marker +data need not be kept around after it's been processed. + +For either method, you'd normally set up marker handling after creating a +decompression object and before calling jpeg_read_header(), because the +markers of interest will typically be near the head of the file and so will +be scanned by jpeg_read_header. Once you've established a marker handling +method, it will be used for the life of that decompression object +(potentially many datastreams), unless you change it. Marker handling is +determined separately for COM markers and for each APPn marker code. + + +To save the contents of special markers in memory, call + jpeg_save_markers(cinfo, marker_code, length_limit) +where marker_code is the marker type to save, JPEG_COM or JPEG_APP0+n. +(To arrange to save all the special marker types, you need to call this +routine 17 times, for COM and APP0-APP15.) If the incoming marker is longer +than length_limit data bytes, only length_limit bytes will be saved; this +parameter allows you to avoid chewing up memory when you only need to see the +first few bytes of a potentially large marker. If you want to save all the +data, set length_limit to 0xFFFF; that is enough since marker lengths are only +16 bits. As a special case, setting length_limit to 0 prevents that marker +type from being saved at all. (That is the default behavior, in fact.) + +After jpeg_read_header() completes, you can examine the special markers by +following the cinfo->marker_list pointer chain. All the special markers in +the file appear in this list, in order of their occurrence in the file (but +omitting any markers of types you didn't ask for). Both the original data +length and the saved data length are recorded for each list entry; the latter +will not exceed length_limit for the particular marker type. Note that these +lengths exclude the marker length word, whereas the stored representation +within the JPEG file includes it. (Hence the maximum data length is really +only 65533.) + +It is possible that additional special markers appear in the file beyond the +SOS marker at which jpeg_read_header stops; if so, the marker list will be +extended during reading of the rest of the file. This is not expected to be +common, however. If you are short on memory you may want to reset the length +limit to zero for all marker types after finishing jpeg_read_header, to +ensure that the max_memory_to_use setting cannot be exceeded due to addition +of later markers. + +The marker list remains stored until you call jpeg_finish_decompress or +jpeg_abort, at which point the memory is freed and the list is set to empty. +(jpeg_destroy also releases the storage, of course.) + +Note that the library is internally interested in APP0 and APP14 markers; +if you try to set a small nonzero length limit on these types, the library +will silently force the length up to the minimum it wants. (But you can set +a zero length limit to prevent them from being saved at all.) Also, in a +16-bit environment, the maximum length limit may be constrained to less than +65533 by malloc() limitations. It is therefore best not to assume that the +effective length limit is exactly what you set it to be. + + +If you want to supply your own marker-reading routine, you do it by calling +jpeg_set_marker_processor(). A marker processor routine must have the +signature + boolean jpeg_marker_parser_method (j_decompress_ptr cinfo) +Although the marker code is not explicitly passed, the routine can find it +in cinfo->unread_marker. At the time of call, the marker proper has been +read from the data source module. The processor routine is responsible for +reading the marker length word and the remaining parameter bytes, if any. +Return TRUE to indicate success. (FALSE should be returned only if you are +using a suspending data source and it tells you to suspend. See the standard +marker processors in jdmarker.c for appropriate coding methods if you need to +use a suspending data source.) + +If you override the default APP0 or APP14 processors, it is up to you to +recognize JFIF and Adobe markers if you want colorspace recognition to occur +properly. We recommend copying and extending the default processors if you +want to do that. (A better idea is to save these marker types for later +examination by calling jpeg_save_markers(); that method doesn't interfere +with the library's own processing of these markers.) + +jpeg_set_marker_processor() and jpeg_save_markers() are mutually exclusive +--- if you call one it overrides any previous call to the other, for the +particular marker type specified. + +A simple example of an external COM processor can be found in djpeg.c. +Also, see jpegtran.c for an example of using jpeg_save_markers. + + +Raw (downsampled) image data +---------------------------- + +Some applications need to supply already-downsampled image data to the JPEG +compressor, or to receive raw downsampled data from the decompressor. The +library supports this requirement by allowing the application to write or +read raw data, bypassing the normal preprocessing or postprocessing steps. +The interface is different from the standard one and is somewhat harder to +use. If your interest is merely in bypassing color conversion, we recommend +that you use the standard interface and simply set jpeg_color_space = +in_color_space (or jpeg_color_space = out_color_space for decompression). +The mechanism described in this section is necessary only to supply or +receive downsampled image data, in which not all components have the same +dimensions. + + +To compress raw data, you must supply the data in the colorspace to be used +in the JPEG file (please read the earlier section on Special color spaces) +and downsampled to the sampling factors specified in the JPEG parameters. +You must supply the data in the format used internally by the JPEG library, +namely a JSAMPIMAGE array. This is an array of pointers to two-dimensional +arrays, each of type JSAMPARRAY. Each 2-D array holds the values for one +color component. This structure is necessary since the components are of +different sizes. If the image dimensions are not a multiple of the MCU size, +you must also pad the data correctly (usually, this is done by replicating +the last column and/or row). The data must be padded to a multiple of a DCT +block in each component: that is, each downsampled row must contain a +multiple of 8 valid samples, and there must be a multiple of 8 sample rows +for each component. (For applications such as conversion of digital TV +images, the standard image size is usually a multiple of the DCT block size, +so that no padding need actually be done.) + +The procedure for compression of raw data is basically the same as normal +compression, except that you call jpeg_write_raw_data() in place of +jpeg_write_scanlines(). Before calling jpeg_start_compress(), you must do +the following: + * Set cinfo->raw_data_in to TRUE. (It is set FALSE by jpeg_set_defaults().) + This notifies the library that you will be supplying raw data. + Furthermore, set cinfo->do_fancy_downsampling to FALSE if you want to use + real downsampled data. (It is set TRUE by jpeg_set_defaults().) + * Ensure jpeg_color_space is correct --- an explicit jpeg_set_colorspace() + call is a good idea. Note that since color conversion is bypassed, + in_color_space is ignored, except that jpeg_set_defaults() uses it to + choose the default jpeg_color_space setting. + * Ensure the sampling factors, cinfo->comp_info[i].h_samp_factor and + cinfo->comp_info[i].v_samp_factor, are correct. Since these indicate the + dimensions of the data you are supplying, it's wise to set them + explicitly, rather than assuming the library's defaults are what you want. + +To pass raw data to the library, call jpeg_write_raw_data() in place of +jpeg_write_scanlines(). The two routines work similarly except that +jpeg_write_raw_data takes a JSAMPIMAGE data array rather than JSAMPARRAY. +The scanlines count passed to and returned from jpeg_write_raw_data is +measured in terms of the component with the largest v_samp_factor. + +jpeg_write_raw_data() processes one MCU row per call, which is to say +v_samp_factor*DCTSIZE sample rows of each component. The passed num_lines +value must be at least max_v_samp_factor*DCTSIZE, and the return value will +be exactly that amount (or possibly some multiple of that amount, in future +library versions). This is true even on the last call at the bottom of the +image; don't forget to pad your data as necessary. + +The required dimensions of the supplied data can be computed for each +component as + cinfo->comp_info[i].width_in_blocks*DCTSIZE samples per row + cinfo->comp_info[i].height_in_blocks*DCTSIZE rows in image +after jpeg_start_compress() has initialized those fields. If the valid data +is smaller than this, it must be padded appropriately. For some sampling +factors and image sizes, additional dummy DCT blocks are inserted to make +the image a multiple of the MCU dimensions. The library creates such dummy +blocks itself; it does not read them from your supplied data. Therefore you +need never pad by more than DCTSIZE samples. An example may help here. +Assume 2h2v downsampling of YCbCr data, that is + cinfo->comp_info[0].h_samp_factor = 2 for Y + cinfo->comp_info[0].v_samp_factor = 2 + cinfo->comp_info[1].h_samp_factor = 1 for Cb + cinfo->comp_info[1].v_samp_factor = 1 + cinfo->comp_info[2].h_samp_factor = 1 for Cr + cinfo->comp_info[2].v_samp_factor = 1 +and suppose that the nominal image dimensions (cinfo->image_width and +cinfo->image_height) are 101x101 pixels. Then jpeg_start_compress() will +compute downsampled_width = 101 and width_in_blocks = 13 for Y, +downsampled_width = 51 and width_in_blocks = 7 for Cb and Cr (and the same +for the height fields). You must pad the Y data to at least 13*8 = 104 +columns and rows, the Cb/Cr data to at least 7*8 = 56 columns and rows. The +MCU height is max_v_samp_factor = 2 DCT rows so you must pass at least 16 +scanlines on each call to jpeg_write_raw_data(), which is to say 16 actual +sample rows of Y and 8 each of Cb and Cr. A total of 7 MCU rows are needed, +so you must pass a total of 7*16 = 112 "scanlines". The last DCT block row +of Y data is dummy, so it doesn't matter what you pass for it in the data +arrays, but the scanlines count must total up to 112 so that all of the Cb +and Cr data gets passed. + +Output suspension is supported with raw-data compression: if the data +destination module suspends, jpeg_write_raw_data() will return 0. +In this case the same data rows must be passed again on the next call. + + +Decompression with raw data output implies bypassing all postprocessing. +You must deal with the color space and sampling factors present in the +incoming file. If your application only handles, say, 2h1v YCbCr data, +you must check for and fail on other color spaces or other sampling factors. +The library will not convert to a different color space for you. + +To obtain raw data output, set cinfo->raw_data_out = TRUE before +jpeg_start_decompress() (it is set FALSE by jpeg_read_header()). Be sure to +verify that the color space and sampling factors are ones you can handle. +Furthermore, set cinfo->do_fancy_upsampling = FALSE if you want to get real +downsampled data (it is set TRUE by jpeg_read_header()). +Then call jpeg_read_raw_data() in place of jpeg_read_scanlines(). The +decompression process is otherwise the same as usual. + +jpeg_read_raw_data() returns one MCU row per call, and thus you must pass a +buffer of at least max_v_samp_factor*DCTSIZE scanlines (scanline counting is +the same as for raw-data compression). The buffer you pass must be large +enough to hold the actual data plus padding to DCT-block boundaries. As with +compression, any entirely dummy DCT blocks are not processed so you need not +allocate space for them, but the total scanline count includes them. The +above example of computing buffer dimensions for raw-data compression is +equally valid for decompression. + +Input suspension is supported with raw-data decompression: if the data source +module suspends, jpeg_read_raw_data() will return 0. You can also use +buffered-image mode to read raw data in multiple passes. + + +Really raw data: DCT coefficients +--------------------------------- + +It is possible to read or write the contents of a JPEG file as raw DCT +coefficients. This facility is mainly intended for use in lossless +transcoding between different JPEG file formats. Other possible applications +include lossless cropping of a JPEG image, lossless reassembly of a +multi-strip or multi-tile TIFF/JPEG file into a single JPEG datastream, etc. + +To read the contents of a JPEG file as DCT coefficients, open the file and do +jpeg_read_header() as usual. But instead of calling jpeg_start_decompress() +and jpeg_read_scanlines(), call jpeg_read_coefficients(). This will read the +entire image into a set of virtual coefficient-block arrays, one array per +component. The return value is a pointer to an array of virtual-array +descriptors. Each virtual array can be accessed directly using the JPEG +memory manager's access_virt_barray method (see Memory management, below, +and also read structure.txt's discussion of virtual array handling). Or, +for simple transcoding to a different JPEG file format, the array list can +just be handed directly to jpeg_write_coefficients(). + +Each block in the block arrays contains quantized coefficient values in +normal array order (not JPEG zigzag order). The block arrays contain only +DCT blocks containing real data; any entirely-dummy blocks added to fill out +interleaved MCUs at the right or bottom edges of the image are discarded +during reading and are not stored in the block arrays. (The size of each +block array can be determined from the width_in_blocks and height_in_blocks +fields of the component's comp_info entry.) This is also the data format +expected by jpeg_write_coefficients(). + +When you are done using the virtual arrays, call jpeg_finish_decompress() +to release the array storage and return the decompression object to an idle +state; or just call jpeg_destroy() if you don't need to reuse the object. + +If you use a suspending data source, jpeg_read_coefficients() will return +NULL if it is forced to suspend; a non-NULL return value indicates successful +completion. You need not test for a NULL return value when using a +non-suspending data source. + +It is also possible to call jpeg_read_coefficients() to obtain access to the +decoder's coefficient arrays during a normal decode cycle in buffered-image +mode. This frammish might be useful for progressively displaying an incoming +image and then re-encoding it without loss. To do this, decode in buffered- +image mode as discussed previously, then call jpeg_read_coefficients() after +the last jpeg_finish_output() call. The arrays will be available for your use +until you call jpeg_finish_decompress(). + + +To write the contents of a JPEG file as DCT coefficients, you must provide +the DCT coefficients stored in virtual block arrays. You can either pass +block arrays read from an input JPEG file by jpeg_read_coefficients(), or +allocate virtual arrays from the JPEG compression object and fill them +yourself. In either case, jpeg_write_coefficients() is substituted for +jpeg_start_compress() and jpeg_write_scanlines(). Thus the sequence is + * Create compression object + * Set all compression parameters as necessary + * Request virtual arrays if needed + * jpeg_write_coefficients() + * jpeg_finish_compress() + * Destroy or re-use compression object +jpeg_write_coefficients() is passed a pointer to an array of virtual block +array descriptors; the number of arrays is equal to cinfo.num_components. + +The virtual arrays need only have been requested, not realized, before +jpeg_write_coefficients() is called. A side-effect of +jpeg_write_coefficients() is to realize any virtual arrays that have been +requested from the compression object's memory manager. Thus, when obtaining +the virtual arrays from the compression object, you should fill the arrays +after calling jpeg_write_coefficients(). The data is actually written out +when you call jpeg_finish_compress(); jpeg_write_coefficients() only writes +the file header. + +When writing raw DCT coefficients, it is crucial that the JPEG quantization +tables and sampling factors match the way the data was encoded, or the +resulting file will be invalid. For transcoding from an existing JPEG file, +we recommend using jpeg_copy_critical_parameters(). This routine initializes +all the compression parameters to default values (like jpeg_set_defaults()), +then copies the critical information from a source decompression object. +The decompression object should have just been used to read the entire +JPEG input file --- that is, it should be awaiting jpeg_finish_decompress(). + +jpeg_write_coefficients() marks all tables stored in the compression object +as needing to be written to the output file (thus, it acts like +jpeg_start_compress(cinfo, TRUE)). This is for safety's sake, to avoid +emitting abbreviated JPEG files by accident. If you really want to emit an +abbreviated JPEG file, call jpeg_suppress_tables(), or set the tables' +individual sent_table flags, between calling jpeg_write_coefficients() and +jpeg_finish_compress(). + + +Progress monitoring +------------------- + +Some applications may need to regain control from the JPEG library every so +often. The typical use of this feature is to produce a percent-done bar or +other progress display. (For a simple example, see cjpeg.c or djpeg.c.) +Although you do get control back frequently during the data-transferring pass +(the jpeg_read_scanlines or jpeg_write_scanlines loop), any additional passes +will occur inside jpeg_finish_compress or jpeg_start_decompress; those +routines may take a long time to execute, and you don't get control back +until they are done. + +You can define a progress-monitor routine which will be called periodically +by the library. No guarantees are made about how often this call will occur, +so we don't recommend you use it for mouse tracking or anything like that. +At present, a call will occur once per MCU row, scanline, or sample row +group, whichever unit is convenient for the current processing mode; so the +wider the image, the longer the time between calls. During the data +transferring pass, only one call occurs per call of jpeg_read_scanlines or +jpeg_write_scanlines, so don't pass a large number of scanlines at once if +you want fine resolution in the progress count. (If you really need to use +the callback mechanism for time-critical tasks like mouse tracking, you could +insert additional calls inside some of the library's inner loops.) + +To establish a progress-monitor callback, create a struct jpeg_progress_mgr, +fill in its progress_monitor field with a pointer to your callback routine, +and set cinfo->progress to point to the struct. The callback will be called +whenever cinfo->progress is non-NULL. (This pointer is set to NULL by +jpeg_create_compress or jpeg_create_decompress; the library will not change +it thereafter. So if you allocate dynamic storage for the progress struct, +make sure it will live as long as the JPEG object does. Allocating from the +JPEG memory manager with lifetime JPOOL_PERMANENT will work nicely.) You +can use the same callback routine for both compression and decompression. + +The jpeg_progress_mgr struct contains four fields which are set by the library: + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +During any one pass, pass_counter increases from 0 up to (not including) +pass_limit; the step size is usually but not necessarily 1. The pass_limit +value may change from one pass to another. The expected total number of +passes is in total_passes, and the number of passes already completed is in +completed_passes. Thus the fraction of work completed may be estimated as + completed_passes + (pass_counter/pass_limit) + -------------------------------------------- + total_passes +ignoring the fact that the passes may not be equal amounts of work. + +When decompressing, pass_limit can even change within a pass, because it +depends on the number of scans in the JPEG file, which isn't always known in +advance. The computed fraction-of-work-done may jump suddenly (if the library +discovers it has overestimated the number of scans) or even decrease (in the +opposite case). It is not wise to put great faith in the work estimate. + +When using the decompressor's buffered-image mode, the progress monitor work +estimate is likely to be completely unhelpful, because the library has no way +to know how many output passes will be demanded of it. Currently, the library +sets total_passes based on the assumption that there will be one more output +pass if the input file end hasn't yet been read (jpeg_input_complete() isn't +TRUE), but no more output passes if the file end has been reached when the +output pass is started. This means that total_passes will rise as additional +output passes are requested. If you have a way of determining the input file +size, estimating progress based on the fraction of the file that's been read +will probably be more useful than using the library's value. + + +Memory management +----------------- + +This section covers some key facts about the JPEG library's built-in memory +manager. For more info, please read structure.txt's section about the memory +manager, and consult the source code if necessary. + +All memory and temporary file allocation within the library is done via the +memory manager. If necessary, you can replace the "back end" of the memory +manager to control allocation yourself (for example, if you don't want the +library to use malloc() and free() for some reason). + +Some data is allocated "permanently" and will not be freed until the JPEG +object is destroyed. Most data is allocated "per image" and is freed by +jpeg_finish_compress, jpeg_finish_decompress, or jpeg_abort. You can call the +memory manager yourself to allocate structures that will automatically be +freed at these times. Typical code for this is + ptr = (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, size); +Use JPOOL_PERMANENT to get storage that lasts as long as the JPEG object. +Use alloc_large instead of alloc_small for anything bigger than a few Kbytes. +There are also alloc_sarray and alloc_barray routines that automatically +build 2-D sample or block arrays. + +The library's minimum space requirements to process an image depend on the +image's width, but not on its height, because the library ordinarily works +with "strip" buffers that are as wide as the image but just a few rows high. +Some operating modes (eg, two-pass color quantization) require full-image +buffers. Such buffers are treated as "virtual arrays": only the current strip +need be in memory, and the rest can be swapped out to a temporary file. + +If you use the simplest memory manager back end (jmemnobs.c), then no +temporary files are used; virtual arrays are simply malloc()'d. Images bigger +than memory can be processed only if your system supports virtual memory. +The other memory manager back ends support temporary files of various flavors +and thus work in machines without virtual memory. They may also be useful on +Unix machines if you need to process images that exceed available swap space. + +When using temporary files, the library will make the in-memory buffers for +its virtual arrays just big enough to stay within a "maximum memory" setting. +Your application can set this limit by setting cinfo->mem->max_memory_to_use +after creating the JPEG object. (Of course, there is still a minimum size for +the buffers, so the max-memory setting is effective only if it is bigger than +the minimum space needed.) If you allocate any large structures yourself, you +must allocate them before jpeg_start_compress() or jpeg_start_decompress() in +order to have them counted against the max memory limit. Also keep in mind +that space allocated with alloc_small() is ignored, on the assumption that +it's too small to be worth worrying about; so a reasonable safety margin +should be left when setting max_memory_to_use. + +If you use the jmemname.c or jmemdos.c memory manager back end, it is +important to clean up the JPEG object properly to ensure that the temporary +files get deleted. (This is especially crucial with jmemdos.c, where the +"temporary files" may be extended-memory segments; if they are not freed, +DOS will require a reboot to recover the memory.) Thus, with these memory +managers, it's a good idea to provide a signal handler that will trap any +early exit from your program. The handler should call either jpeg_abort() +or jpeg_destroy() for any active JPEG objects. A handler is not needed with +jmemnobs.c, and shouldn't be necessary with jmemansi.c or jmemmac.c either, +since the C library is supposed to take care of deleting files made with +tmpfile(). + + +Memory usage +------------ + +Working memory requirements while performing compression or decompression +depend on image dimensions, image characteristics (such as colorspace and +JPEG process), and operating mode (application-selected options). + +As of v6b, the decompressor requires: + 1. About 24K in more-or-less-fixed-size data. This varies a bit depending + on operating mode and image characteristics (particularly color vs. + grayscale), but it doesn't depend on image dimensions. + 2. Strip buffers (of size proportional to the image width) for IDCT and + upsampling results. The worst case for commonly used sampling factors + is about 34 bytes * width in pixels for a color image. A grayscale image + only needs about 8 bytes per pixel column. + 3. A full-image DCT coefficient buffer is needed to decode a multi-scan JPEG + file (including progressive JPEGs), or whenever you select buffered-image + mode. This takes 2 bytes/coefficient. At typical 2x2 sampling, that's + 3 bytes per pixel for a color image. Worst case (1x1 sampling) requires + 6 bytes/pixel. For grayscale, figure 2 bytes/pixel. + 4. To perform 2-pass color quantization, the decompressor also needs a + 128K color lookup table and a full-image pixel buffer (3 bytes/pixel). +This does not count any memory allocated by the application, such as a +buffer to hold the final output image. + +The above figures are valid for 8-bit JPEG data precision and a machine with +32-bit ints. For 12-bit JPEG data, double the size of the strip buffers and +quantization pixel buffer. The "fixed-size" data will be somewhat smaller +with 16-bit ints, larger with 64-bit ints. Also, CMYK or other unusual +color spaces will require different amounts of space. + +The full-image coefficient and pixel buffers, if needed at all, do not +have to be fully RAM resident; you can have the library use temporary +files instead when the total memory usage would exceed a limit you set. +(But if your OS supports virtual memory, it's probably better to just use +jmemnobs and let the OS do the swapping.) + +The compressor's memory requirements are similar, except that it has no need +for color quantization. Also, it needs a full-image DCT coefficient buffer +if Huffman-table optimization is asked for, even if progressive mode is not +requested. + +If you need more detailed information about memory usage in a particular +situation, you can enable the MEM_STATS code in jmemmgr.c. + + +Library compile-time options +---------------------------- + +A number of compile-time options are available by modifying jmorecfg.h. + +The JPEG standard provides for both the baseline 8-bit DCT process and +a 12-bit DCT process. The IJG code supports 12-bit JPEG if you define +BITS_IN_JSAMPLE as 12 rather than 8. Note that this causes JSAMPLE to be +larger than a char, so it affects the surrounding application's image data. +The sample applications cjpeg and djpeg can support 12-bit mode only for PPM +and GIF file formats; you must disable the other file formats to compile a +12-bit cjpeg or djpeg. (install.txt has more information about that.) +At present, a 12-bit library can handle *only* 12-bit images, not both +precisions. (If you need to include both 8- and 12-bit libraries in a single +application, you could probably do it by defining NEED_SHORT_EXTERNAL_NAMES +for just one of the copies. You'd have to access the 8-bit and 12-bit copies +from separate application source files. This is untested ... if you try it, +we'd like to hear whether it works!) + +Note that a 12-bit library always compresses in Huffman optimization mode, +in order to generate valid Huffman tables. This is necessary because our +default Huffman tables only cover 8-bit data. If you need to output 12-bit +files in one pass, you'll have to supply suitable default Huffman tables. +You may also want to supply your own DCT quantization tables; the existing +quality-scaling code has been developed for 8-bit use, and probably doesn't +generate especially good tables for 12-bit. + +The maximum number of components (color channels) in the image is determined +by MAX_COMPONENTS. The JPEG standard allows up to 255 components, but we +expect that few applications will need more than four or so. + +On machines with unusual data type sizes, you may be able to improve +performance or reduce memory space by tweaking the various typedefs in +jmorecfg.h. In particular, on some RISC CPUs, access to arrays of "short"s +is quite slow; consider trading memory for speed by making JCOEF, INT16, and +UINT16 be "int" or "unsigned int". UINT8 is also a candidate to become int. +You probably don't want to make JSAMPLE be int unless you have lots of memory +to burn. + +You can reduce the size of the library by compiling out various optional +functions. To do this, undefine xxx_SUPPORTED symbols as necessary. + +You can also save a few K by not having text error messages in the library; +the standard error message table occupies about 5Kb. This is particularly +reasonable for embedded applications where there's no good way to display +a message anyway. To do this, remove the creation of the message table +(jpeg_std_message_table[]) from jerror.c, and alter format_message to do +something reasonable without it. You could output the numeric value of the +message code number, for example. If you do this, you can also save a couple +more K by modifying the TRACEMSn() macros in jerror.h to expand to nothing; +you don't need trace capability anyway, right? + + +Portability considerations +-------------------------- + +The JPEG library has been written to be extremely portable; the sample +applications cjpeg and djpeg are slightly less so. This section summarizes +the design goals in this area. (If you encounter any bugs that cause the +library to be less portable than is claimed here, we'd appreciate hearing +about them.) + +The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of +the popular system include file setups, and some not-so-popular ones too. +See install.txt for configuration procedures. + +The code is not dependent on the exact sizes of the C data types. As +distributed, we make the assumptions that + char is at least 8 bits wide + short is at least 16 bits wide + int is at least 16 bits wide + long is at least 32 bits wide +(These are the minimum requirements of the ANSI C standard.) Wider types will +work fine, although memory may be used inefficiently if char is much larger +than 8 bits or short is much bigger than 16 bits. The code should work +equally well with 16- or 32-bit ints. + +In a system where these assumptions are not met, you may be able to make the +code work by modifying the typedefs in jmorecfg.h. However, you will probably +have difficulty if int is less than 16 bits wide, since references to plain +int abound in the code. + +char can be either signed or unsigned, although the code runs faster if an +unsigned char type is available. If char is wider than 8 bits, you will need +to redefine JOCTET and/or provide custom data source/destination managers so +that JOCTET represents exactly 8 bits of data on external storage. + +The JPEG library proper does not assume ASCII representation of characters. +But some of the image file I/O modules in cjpeg/djpeg do have ASCII +dependencies in file-header manipulation; so does cjpeg's select_file_type() +routine. + +The JPEG library does not rely heavily on the C library. In particular, C +stdio is used only by the data source/destination modules and the error +handler, all of which are application-replaceable. (cjpeg/djpeg are more +heavily dependent on stdio.) malloc and free are called only from the memory +manager "back end" module, so you can use a different memory allocator by +replacing that one file. + +The code generally assumes that C names must be unique in the first 15 +characters. However, global function names can be made unique in the +first 6 characters by defining NEED_SHORT_EXTERNAL_NAMES. + +More info about porting the code may be gleaned by reading jconfig.txt, +jmorecfg.h, and jinclude.h. + + +Notes for MS-DOS implementors +----------------------------- + +The IJG code is designed to work efficiently in 80x86 "small" or "medium" +memory models (i.e., data pointers are 16 bits unless explicitly declared +"far"; code pointers can be either size). You may be able to use small +model to compile cjpeg or djpeg by itself, but you will probably have to use +medium model for any larger application. This won't make much difference in +performance. You *will* take a noticeable performance hit if you use a +large-data memory model (perhaps 10%-25%), and you should avoid "huge" model +if at all possible. + +The JPEG library typically needs 2Kb-3Kb of stack space. It will also +malloc about 20K-30K of near heap space while executing (and lots of far +heap, but that doesn't count in this calculation). This figure will vary +depending on selected operating mode, and to a lesser extent on image size. +There is also about 5Kb-6Kb of constant data which will be allocated in the +near data segment (about 4Kb of this is the error message table). +Thus you have perhaps 20K available for other modules' static data and near +heap space before you need to go to a larger memory model. The C library's +static data will account for several K of this, but that still leaves a good +deal for your needs. (If you are tight on space, you could reduce the sizes +of the I/O buffers allocated by jdatasrc.c and jdatadst.c, say from 4K to +1K. Another possibility is to move the error message table to far memory; +this should be doable with only localized hacking on jerror.c.) + +About 2K of the near heap space is "permanent" memory that will not be +released until you destroy the JPEG object. This is only an issue if you +save a JPEG object between compression or decompression operations. + +Far data space may also be a tight resource when you are dealing with large +images. The most memory-intensive case is decompression with two-pass color +quantization, or single-pass quantization to an externally supplied color +map. This requires a 128Kb color lookup table plus strip buffers amounting +to about 40 bytes per column for typical sampling ratios (eg, about 25600 +bytes for a 640-pixel-wide image). You may not be able to process wide +images if you have large data structures of your own. + +Of course, all of these concerns vanish if you use a 32-bit flat-memory-model +compiler, such as DJGPP or Watcom C. We highly recommend flat model if you +can use it; the JPEG library is significantly faster in flat model. diff --git a/src/SDL2/external/jpeg-9/ltmain.sh b/src/SDL2/external/jpeg-9/ltmain.sh new file mode 100644 index 000000000..63ae69dc6 --- /dev/null +++ b/src/SDL2/external/jpeg-9/ltmain.sh @@ -0,0 +1,9655 @@ + +# libtool (GNU libtool) 2.4.2 +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --no-warn don't display warning messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.4.2 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . +# GNU libtool home page: . +# General help using GNU software: . + +PROGRAM=libtool +PACKAGE=libtool +VERSION=2.4.2 +TIMESTAMP="" +package_revision=1.3337 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# NLS nuisances: We save the old values to restore during execute mode. +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL + +$lt_unset CDPATH + + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + + + +: ${CP="cp -f"} +test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} # func_dirname may be replaced by extended shell implementation + + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} # func_basename may be replaced by extended shell implementation + + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +} # func_dirname_and_basename may be replaced by extended shell implementation + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname may be replaced by extended shell implementation + + +# These SED scripts presuppose an absolute path with a trailing slash. +pathcar='s,^/\([^/]*\).*$,\1,' +pathcdr='s,^/[^/]*,,' +removedotparts=':dotsl + s@/\./@/@g + t dotsl + s,/\.$,/,' +collapseslashes='s@/\{1,\}@/@g' +finalslash='s,/*$,/,' + +# func_normal_abspath PATH +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +# value returned in "$func_normal_abspath_result" +func_normal_abspath () +{ + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` + while :; do + # Processed it all yet? + if test "$func_normal_abspath_tpath" = / ; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result" ; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + +# func_relative_path SRCDIR DSTDIR +# generates a relative path from SRCDIR to DSTDIR, with a trailing +# slash if non-empty, suitable for immediately appending a filename +# without needing to append a separator. +# value returned in "$func_relative_path_result" +func_relative_path () +{ + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=${func_dirname_result} + if test "x$func_relative_path_tlibdir" = x ; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test "x$func_stripname_result" != x ; then + func_relative_path_result=${func_relative_path_result}/${func_stripname_result} + fi + + # Normalisation. If bindir is libdir, return empty string, + # else relative path ending with a slash; either way, target + # file name can be directly appended. + if test ! -z "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result/" + func_relative_path_result=$func_stripname_result + fi +} + +# The name of this program: +func_dirname_and_basename "$progpath" +progname=$func_basename_result + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=${PATH_SEPARATOR-:} + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' + +# Sed substitution that converts a w32 file name or path +# which contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }$*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + done + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "$my_tmpdir" +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "$1" | $SED \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + +# func_tr_sh +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $opt_debug + + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# / / + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $opt_debug + + $SED -n '/^# Usage:/,/^# *.*--help/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + echo + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. +func_help () +{ + $opt_debug + + $SED -n '/^# Usage:/,/# Report bugs to/ { + :print + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ + p + d + } + /^# .* home page:/b print + /^# General help using/b print + ' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + $opt_debug + + func_error "missing argument for $1." + exit_cmd=exit +} + + +# func_split_short_opt shortopt +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +func_split_short_opt () +{ + my_sed_short_opt='1s/^\(..\).*$/\1/;q' + my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + + func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` + func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` +} # func_split_short_opt may be replaced by extended shell implementation + + +# func_split_long_opt longopt +# Set func_split_long_opt_name and func_split_long_opt_arg shell +# variables after splitting LONGOPT at the `=' sign. +func_split_long_opt () +{ + my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' + my_sed_long_arg='1s/^--[^=]*=//' + + func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` + func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` +} # func_split_long_opt may be replaced by extended shell implementation + +exit_cmd=: + + + + + +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +nonopt= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "${1}=\$${1}\${2}" +} # func_append may be replaced by extended shell implementation + +# func_append_quoted var value +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +func_append_quoted () +{ + func_quote_for_eval "${2}" + eval "${1}=\$${1}\\ \$func_quote_for_eval_result" +} # func_append_quoted may be replaced by extended shell implementation + + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "${@}"` +} # func_arith may be replaced by extended shell implementation + + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` +} # func_len may be replaced by extended shell implementation + + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} # func_lo2o may be replaced by extended shell implementation + + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} # func_xform may be replaced by extended shell implementation + + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + + exit $? +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +# Shorthand for --mode=foo, only valid as the first argument +case $1 in +clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; +compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; +execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; +finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; +install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; +link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; +uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; +esac + + + +# Option defaults: +opt_debug=: +opt_dry_run=false +opt_config=false +opt_preserve_dup_deps=false +opt_features=false +opt_finish=false +opt_help=false +opt_help_all=false +opt_silent=: +opt_warning=: +opt_verbose=: +opt_silent=false +opt_verbose=false + + +# Parse options once, thoroughly. This comes as soon as possible in the +# script to make things like `--version' happen as quickly as we can. +{ + # this just eases exit handling + while test $# -gt 0; do + opt="$1" + shift + case $opt in + --debug|-x) opt_debug='set -x' + func_echo "enabling shell trace mode" + $opt_debug + ;; + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + --config) + opt_config=: +func_config + ;; + --dlopen|-dlopen) + optarg="$1" + opt_dlopen="${opt_dlopen+$opt_dlopen +}$optarg" + shift + ;; + --preserve-dup-deps) + opt_preserve_dup_deps=: + ;; + --features) + opt_features=: +func_features + ;; + --finish) + opt_finish=: +set dummy --mode finish ${1+"$@"}; shift + ;; + --help) + opt_help=: + ;; + --help-all) + opt_help_all=: +opt_help=': help-all' + ;; + --mode) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_mode="$optarg" +case $optarg in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; +esac + shift + ;; + --no-silent|--no-quiet) + opt_silent=false +func_append preserve_args " $opt" + ;; + --no-warning|--no-warn) + opt_warning=false +func_append preserve_args " $opt" + ;; + --no-verbose) + opt_verbose=false +func_append preserve_args " $opt" + ;; + --silent|--quiet) + opt_silent=: +func_append preserve_args " $opt" + opt_verbose=false + ;; + --verbose|-v) + opt_verbose=: +func_append preserve_args " $opt" +opt_silent=false + ;; + --tag) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_tag="$optarg" +func_append preserve_args " $opt $optarg" +func_enable_tag "$optarg" + shift + ;; + + -\?|-h) func_usage ;; + --help) func_help ;; + --version) func_version ;; + + # Separate optargs to long options: + --*=*) + func_split_long_opt "$opt" + set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-n*|-v*) + func_split_short_opt "$opt" + set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognized option \`$opt'" ;; + *) set dummy "$opt" ${1+"$@"}; shift; break ;; + esac + done + + # Validate options: + + # save first non-option argument + if test "$#" -gt 0; then + nonopt="$opt" + shift + fi + + # preserve --debug + test "$opt_debug" = : || func_append preserve_args " --debug" + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + + $opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test "$opt_mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$opt_mode' for more information." + } + + + # Bail if the options were screwed + $exit_cmd $EXIT_FAILURE +} + + + + +## ----------- ## +## Main. ## +## ----------- ## + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result + ;; + esac +} + +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case "$lt_sysroot:$1" in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result="=$func_stripname_result" + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T </dev/null` + if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$lt_sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= + fi + fi +} +# end: func_convert_core_file_wine_to_w32 + + +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $opt_debug + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result="" + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" + fi + fi + done + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 + + +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $opt_debug + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + fi +} +#end: func_cygpath + + +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $opt_debug + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 + + +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $opt_debug + if test -z "$2" && test -n "$1" ; then + func_error "Could not determine host file name corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result="$1" + fi +} +# end func_convert_file_check + + +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $opt_debug + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " \`$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result="$3" + fi + fi +} +# end func_convert_path_check + + +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $opt_debug + case $4 in + $1 ) func_to_host_path_result="$3$func_to_host_path_result" + ;; + esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep + + +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via `$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. + + +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $opt_debug + $to_host_file_cmd "$1" +} +# end func_to_host_file + + +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $opt_debug + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 + ;; + *) + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result + ;; + esac +} +# end func_to_tool_file + + +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result="$1" +} +# end func_convert_file_noop + + +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result="$func_convert_core_msys_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 + + +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 + + +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 + + +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin + + +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin + + +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via `$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. + + +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $opt_debug + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd="func_convert_path_${func_stripname_result}" + fi +} + + +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $opt_debug + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path + + +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result="$1" +} +# end func_convert_path_noop + + +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 + + +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 + + +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 + + +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_msys_to_cygwin + + +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_nix_to_cygwin + + +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" + arg_mode=target + continue + ;; + + -pie | -fpie | -fPIE) + func_append pie_flag " $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + func_append later " $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + func_append_quoted lastarg "$arg" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + func_append base_compile " $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + func_append_quoted base_compile "$lastarg" + done # for arg + + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + func_append command " -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + func_append command " -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { + test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$opt_mode'" + ;; + esac + + echo + $ECHO "Try \`$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + func_append dir "/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_append_quoted args "$file" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libs= + libdirs= + admincmds= + + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" + + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" + else + func_warning "\`$opt' is not a valid libtool archive" + fi + + else + func_fatal_error "invalid argument \`$opt'" + fi + done + + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi + + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi + exit $EXIT_SUCCESS +} + +test "$opt_mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + func_append files " $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + func_append install_shared_prog " $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + func_append staticlibs " $file" + ;; + + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) func_append future_libdirs " $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + func_append dir "$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $tool_oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename="" + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname" ; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename="$func_basename_result" + else + # no lafile. user explicitly requested -dlpreopen . + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename" ; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + echo >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +extern LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) func_append symtab_cflags " $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () +{ + $opt_debug + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` +} + +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () +{ + $opt_debug + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive which possess that section. Heuristic: eliminate + # all those which have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' +} + +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () +{ + $opt_debug + if func_cygming_gnu_implib_p "$1" ; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1" ; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result="" + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ which is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options which match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + case \" \$* \" in + *\\ --lt-*) + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done ;; + esac + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} + + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#if defined(LT_DEBUGWRAPPER) +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} + +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -n -e ' +s/^\(.\{79\}\)\(..*\)/\1\ +\2/ +h +s/\([\\"]\)/\\\1/g +s/$/\\n/ +s/\([^\n]*\).*/ fputs ("\1", f);/p +g +D' + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + func_append dlfiles " $arg" + else + func_append dlprefiles " $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# func_append moreargs " $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) func_append rpath " $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) func_append xrpath " $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + func_append weak_libs " $arg" + prev= + continue + ;; + xcclinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -bindir) + prev=bindir + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; + *) + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) func_append dllsearchpath ":$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + func_append deplibs " System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + func_append deplibs " $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) func_append new_inherited_linker_flags " $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + func_append compiler_flags " $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + func_append objs " $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + func_append deplibs " $arg" + func_append old_deplibs " $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + func_resolve_sysroot "$arg" + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + func_append dlfiles " $func_resolve_sysroot_result" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + func_append dlprefiles " $func_resolve_sysroot_result" + prev= + else + func_append deplibs " $func_resolve_sysroot_result" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_preserve_dup_deps ; then + case "$libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append libs " $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + esac + func_append pre_post_deps " $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + func_resolve_sysroot "$lib" + case $lib in + *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) func_append deplibs " $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append compiler_flags " $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + else + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + func_append newdlprefiles " $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append newdlfiles " $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + if test -n "$old_library" && + { test "$prefer_static_libs" = yes || + test "$prefer_static_libs,$installed" = "built,no"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib="$l" + done + fi + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + func_append dlprefiles " $lib $dependency_libs" + else + func_append newdlfiles " $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$lt_sysroot$libdir" + absdir="$lt_sysroot$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + case "$host" in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + func_append newlib_search_path " $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) func_append temp_rpath "$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + echo + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$opt_mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$absdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$opt_mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) func_append xrpath " $temp_xrpath";; + esac;; + *) func_append temp_deplibs " $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + func_append newlib_search_path " $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; + esac + fi + func_append tmp_libs " $func_resolve_sysroot_result" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." + dir=$func_dirname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) func_append lib_search_path " $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) func_append tmp_libs " $deplib" ;; + esac + ;; + *) func_append tmp_libs " $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + func_append tmp_libs " $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + func_append objs "$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + func_append libobjs " $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + # correct linux to gnu/linux during the next big refactor + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|qnx|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) # correct to gnu/linux during the next big refactor + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + func_append verstring ":${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + func_append libobjs " $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$opt_mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + func_append removelist " $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + func_append oldlibs " $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) func_append dlfiles " $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) func_append dlprefiles " $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + func_append deplibs " System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + func_append deplibs " -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + func_append newdeplibs " $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + # Remove ${wl} instances when linking with ld. + # FIXME: should test the right _cmds variable. + case $archive_cmds in + *\$LD\ *) wl= ;; + esac + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append dep_rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + func_append linknames " $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + func_append delfiles " $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd1 in $cmds; do + IFS="$save_ifs" + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test "$try_normal_branch" = yes \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=${output_objdir}/${output_la}.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + func_append tmp_deplibs " $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + func_append linker_flags " $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + func_append delfiles " $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # If we're not building shared, we need to use non_pic_objs + test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" + + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + func_append compile_command " ${wl}-bind_at_load" + func_append finalize_command " ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) func_append dllsearchpath ":$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) func_append finalize_perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=yes + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + + exit $exit_status + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + func_append rpath "$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + func_append oldobjs " $symfileobj" + fi + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $addlibs + func_append oldobjs " $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append oldobjs " $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" + ;; + *) func_append oldobjs " $obj" ;; + esac + done + fi + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + func_resolve_sysroot "$deplib" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" + ;; + *) func_append newdependency_libs " $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; + *) func_append newdlfiles " $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlfiles " $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlprefiles " $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +{ test "$opt_mode" = link || test "$opt_mode" = relink; } && + func_mode_link ${1+"$@"} + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) func_append RM " $arg"; rmforce=yes ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + odir="$objdir" + else + odir="$dir/$objdir" + fi + func_basename "$file" + name="$func_basename_result" + test "$opt_mode" = uninstall && odir="$dir" + + # Remember odir for removal later, being careful to avoid duplicates + if test "$opt_mode" = clean; then + case " $rmdirs " in + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + func_append rmfiles " $odir/$n" + done + test -n "$old_library" && func_append rmfiles " $odir/$old_library" + + case "$opt_mode" in + clean) + case " $library_names " in + *" $dlname "*) ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + esac + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + func_append rmfiles " $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + func_append rmfiles " $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$opt_mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + func_append rmfiles " $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + func_append rmfiles " $odir/$name $odir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + func_append rmfiles " $odir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + func_append rmfiles " $odir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +test -z "$opt_mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$opt_mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: +# vi:sw=2 + diff --git a/src/SDL2/external/jpeg-9/makcjpeg.st b/src/SDL2/external/jpeg-9/makcjpeg.st new file mode 100644 index 000000000..628f53350 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makcjpeg.st @@ -0,0 +1,36 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to cjpeg.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +cjpeg.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +cjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +libjpeg.lib ; built by libjpeg.prj +pcfltlib.lib ; floating point library +; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/src/SDL2/external/jpeg-9/makdjpeg.st b/src/SDL2/external/jpeg-9/makdjpeg.st new file mode 100644 index 000000000..4b61404a6 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makdjpeg.st @@ -0,0 +1,36 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to djpeg.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +djpeg.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +djpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdcolmap.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +libjpeg.lib ; built by libjpeg.prj +pcfltlib.lib ; floating point library +; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/src/SDL2/external/jpeg-9/makeadsw.vc6 b/src/SDL2/external/jpeg-9/makeadsw.vc6 new file mode 100644 index 000000000..80459c532 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makeadsw.vc6 @@ -0,0 +1,77 @@ +Microsoft Developer Studio Workspace File, Format Version 6.00 +# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GEL™SCHT WERDEN! + +############################################################################### + +Project: "cjpeg"=".\cjpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "djpeg"=".\djpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "jpegtran"=".\jpegtran.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "rdjpgcom"=".\rdjpgcom.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "wrjpgcom"=".\wrjpgcom.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Global: + +Package=<5> +{{{ +}}} + +Package=<3> +{{{ +}}} + +############################################################################### + diff --git a/src/SDL2/external/jpeg-9/makeasln.v10 b/src/SDL2/external/jpeg-9/makeasln.v10 new file mode 100644 index 000000000..617d9e94b --- /dev/null +++ b/src/SDL2/external/jpeg-9/makeasln.v10 @@ -0,0 +1,33 @@ +‹¯¨ +Microsoft Visual Studio Solution File, Format Version 11.00 +# Visual C++ Express 2010 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "cjpeg", "cjpeg.vcxproj", "{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "djpeg", "djpeg.vcxproj", "{11043137-B453-4DFA-9010-4D2B9DC1545C}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpegtran", "jpegtran.vcxproj", "{025BAC50-51B5-4FFE-BC47-3F920BB4047E}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "rdjpgcom", "rdjpgcom.vcxproj", "{C81513DB-78DC-46BC-BC98-82E745203976}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wrjpgcom", "wrjpgcom.vcxproj", "{B57065D4-DDDA-4668-BAF5-2D49270C973C}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Release|Win32 = Release|Win32 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.ActiveCfg = Release|Win32 + {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.Build.0 = Release|Win32 + {11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.ActiveCfg = Release|Win32 + {11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.Build.0 = Release|Win32 + {025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.ActiveCfg = Release|Win32 + {025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.Build.0 = Release|Win32 + {C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.ActiveCfg = Release|Win32 + {C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.Build.0 = Release|Win32 + {B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.ActiveCfg = Release|Win32 + {B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.Build.0 = Release|Win32 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/SDL2/external/jpeg-9/makecdep.vc6 b/src/SDL2/external/jpeg-9/makecdep.vc6 new file mode 100644 index 000000000..11dff7779 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makecdep.vc6 @@ -0,0 +1,82 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von cjpeg.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\cjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\rdbmp.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdgif.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdppm.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdrle.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdswitch.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdtarga.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + diff --git a/src/SDL2/external/jpeg-9/makecdsp.vc6 b/src/SDL2/external/jpeg-9/makecdsp.vc6 new file mode 100644 index 000000000..3ab596511 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makecdsp.vc6 @@ -0,0 +1,130 @@ +# Microsoft Developer Studio Project File - Name="cjpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=cjpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "cjpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\cjpeg\Release" +# PROP BASE Intermediate_Dir ".\cjpeg\Release" +# PROP BASE Target_Dir ".\cjpeg" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\cjpeg\Release" +# PROP Intermediate_Dir ".\cjpeg\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\cjpeg" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "cjpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\cjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\rdbmp.c +# End Source File +# Begin Source File + +SOURCE=.\rdgif.c +# End Source File +# Begin Source File + +SOURCE=.\rdppm.c +# End Source File +# Begin Source File + +SOURCE=.\rdrle.c +# End Source File +# Begin Source File + +SOURCE=.\rdswitch.c +# End Source File +# Begin Source File + +SOURCE=.\rdtarga.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/SDL2/external/jpeg-9/makecfil.v10 b/src/SDL2/external/jpeg-9/makecfil.v10 new file mode 100644 index 000000000..a4f81ac33 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makecfil.v10 @@ -0,0 +1,69 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/makecmak.vc6 b/src/SDL2/external/jpeg-9/makecmak.vc6 new file mode 100644 index 000000000..bee03bf90 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makecmak.vc6 @@ -0,0 +1,159 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on cjpeg.dsp +!IF "$(CFG)" == "" +CFG=cjpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. cjpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "cjpeg - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "cjpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\cjpeg\Release +INTDIR=.\cjpeg\Release +# Begin Custom Macros +OutDir=.\cjpeg\Release +# End Custom Macros + +ALL : "$(OUTDIR)\cjpeg.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\cjpeg.obj" + -@erase "$(INTDIR)\rdbmp.obj" + -@erase "$(INTDIR)\rdgif.obj" + -@erase "$(INTDIR)\rdppm.obj" + -@erase "$(INTDIR)\rdrle.obj" + -@erase "$(INTDIR)\rdswitch.obj" + -@erase "$(INTDIR)\rdtarga.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\cjpeg.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\cjpeg.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\cjpeg.pdb" /machine:I386 /out:"$(OUTDIR)\cjpeg.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\cjpeg.obj" \ + "$(INTDIR)\rdbmp.obj" \ + "$(INTDIR)\rdgif.obj" \ + "$(INTDIR)\rdppm.obj" \ + "$(INTDIR)\rdrle.obj" \ + "$(INTDIR)\rdswitch.obj" \ + "$(INTDIR)\rdtarga.obj" + +"$(OUTDIR)\cjpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\cjpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("cjpeg.dep") +!INCLUDE "cjpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "cjpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "cjpeg - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\cjpeg.c + +"$(INTDIR)\cjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdbmp.c + +"$(INTDIR)\rdbmp.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdgif.c + +"$(INTDIR)\rdgif.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdppm.c + +"$(INTDIR)\rdppm.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdrle.c + +"$(INTDIR)\rdrle.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdswitch.c + +"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdtarga.c + +"$(INTDIR)\rdtarga.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/SDL2/external/jpeg-9/makecvcx.v10 b/src/SDL2/external/jpeg-9/makecvcx.v10 new file mode 100644 index 000000000..5df5c68f1 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makecvcx.v10 @@ -0,0 +1,76 @@ +‹¯¨ + + + + Release + Win32 + + + + {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57} + Win32Proj + cjpeg + + + + Application + false + true + Unicode + + + + + + + + + + false + $(ProjectName)\$(Configuration)\ + $(ProjectName)\$(Configuration)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/makeddep.vc6 b/src/SDL2/external/jpeg-9/makeddep.vc6 new file mode 100644 index 000000000..f911eba7d --- /dev/null +++ b/src/SDL2/external/jpeg-9/makeddep.vc6 @@ -0,0 +1,82 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von djpeg.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\djpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\rdcolmap.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrbmp.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrgif.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrppm.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrrle.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrtarga.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + diff --git a/src/SDL2/external/jpeg-9/makeddsp.vc6 b/src/SDL2/external/jpeg-9/makeddsp.vc6 new file mode 100644 index 000000000..f583a0f6a --- /dev/null +++ b/src/SDL2/external/jpeg-9/makeddsp.vc6 @@ -0,0 +1,130 @@ +# Microsoft Developer Studio Project File - Name="djpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=djpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "djpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\djpeg\Release" +# PROP BASE Intermediate_Dir ".\djpeg\Release" +# PROP BASE Target_Dir ".\djpeg" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\djpeg\Release" +# PROP Intermediate_Dir ".\djpeg\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\djpeg" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "djpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\djpeg.c +# End Source File +# Begin Source File + +SOURCE=.\rdcolmap.c +# End Source File +# Begin Source File + +SOURCE=.\wrbmp.c +# End Source File +# Begin Source File + +SOURCE=.\wrgif.c +# End Source File +# Begin Source File + +SOURCE=.\wrppm.c +# End Source File +# Begin Source File + +SOURCE=.\wrrle.c +# End Source File +# Begin Source File + +SOURCE=.\wrtarga.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/SDL2/external/jpeg-9/makedfil.v10 b/src/SDL2/external/jpeg-9/makedfil.v10 new file mode 100644 index 000000000..b4a83abf9 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makedfil.v10 @@ -0,0 +1,69 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/makedmak.vc6 b/src/SDL2/external/jpeg-9/makedmak.vc6 new file mode 100644 index 000000000..e16487ff4 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makedmak.vc6 @@ -0,0 +1,159 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on djpeg.dsp +!IF "$(CFG)" == "" +CFG=djpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. djpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "djpeg - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "djpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\djpeg\Release +INTDIR=.\djpeg\Release +# Begin Custom Macros +OutDir=.\djpeg\Release +# End Custom Macros + +ALL : "$(OUTDIR)\djpeg.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\djpeg.obj" + -@erase "$(INTDIR)\rdcolmap.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(INTDIR)\wrbmp.obj" + -@erase "$(INTDIR)\wrgif.obj" + -@erase "$(INTDIR)\wrppm.obj" + -@erase "$(INTDIR)\wrrle.obj" + -@erase "$(INTDIR)\wrtarga.obj" + -@erase "$(OUTDIR)\djpeg.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\djpeg.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\djpeg.pdb" /machine:I386 /out:"$(OUTDIR)\djpeg.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\djpeg.obj" \ + "$(INTDIR)\rdcolmap.obj" \ + "$(INTDIR)\wrbmp.obj" \ + "$(INTDIR)\wrgif.obj" \ + "$(INTDIR)\wrppm.obj" \ + "$(INTDIR)\wrrle.obj" \ + "$(INTDIR)\wrtarga.obj" + +"$(OUTDIR)\djpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\djpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("djpeg.dep") +!INCLUDE "djpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "djpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "djpeg - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\djpeg.c + +"$(INTDIR)\djpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdcolmap.c + +"$(INTDIR)\rdcolmap.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrbmp.c + +"$(INTDIR)\wrbmp.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrgif.c + +"$(INTDIR)\wrgif.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrppm.c + +"$(INTDIR)\wrppm.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrrle.c + +"$(INTDIR)\wrrle.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrtarga.c + +"$(INTDIR)\wrtarga.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/SDL2/external/jpeg-9/makedvcx.v10 b/src/SDL2/external/jpeg-9/makedvcx.v10 new file mode 100644 index 000000000..9ad2d4133 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makedvcx.v10 @@ -0,0 +1,76 @@ +‹¯¨ + + + + Release + Win32 + + + + {11043137-B453-4DFA-9010-4D2B9DC1545C} + Win32Proj + djpeg + + + + Application + false + true + Unicode + + + + + + + + + + false + $(ProjectName)\$(Configuration)\ + $(ProjectName)\$(Configuration)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/makefile.ansi b/src/SDL2/external/jpeg-9/makefile.ansi new file mode 100644 index 000000000..c0fe72b1c --- /dev/null +++ b/src/SDL2/external/jpeg-9/makefile.ansi @@ -0,0 +1,221 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Unix-like systems with ANSI-capable compilers. +# If you have a non-ANSI compiler, makefile.unix is a better starting point. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= cc + +# You may need to adjust these cc options: +CFLAGS= -O +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +LDFLAGS= + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= + +# Put here the object file name for the correct system-dependent memory +# manager file. For Unix this is usually jmemnobs.o, but you may want +# to use jmemansi.o or jmemname.o if you have limited swap space. +SYSDEPMEM= jmemnobs.o + +# miscellaneous OS-dependent stuff +# linker +LN= $(CC) +# file deletion command +RM= rm -f +# library (.a) file creation command +AR= ar rc +# second step in .a creation (use "touch" if not needed) +AR2= ranlib + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ + makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ + makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ + makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ + makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ + makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.a +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom + +libjpeg.a: $(LIBOBJECTS) + $(RM) libjpeg.a + $(AR) libjpeg.a $(LIBOBJECTS) + $(AR2) libjpeg.a + +cjpeg: $(COBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS) + +djpeg: $(DOBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS) + +jpegtran: $(TROBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS) + +rdjpgcom: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) + +wrjpgcom: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + $(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom + $(RM) core testout* + +test: cjpeg djpeg jpegtran + $(RM) testout* + ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + ./cjpeg -dct int -outfile testout.jpg testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + ./jpegtran -outfile testoutt.jpg testprog.jpg + cmp testimg.ppm testout.ppm + cmp testimg.bmp testout.bmp + cmp testimg.jpg testout.jpg + cmp testimg.ppm testoutp.ppm + cmp testimgp.jpg testoutp.jpg + cmp testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/SDL2/external/jpeg-9/makefile.bcc b/src/SDL2/external/jpeg-9/makefile.bcc new file mode 100644 index 000000000..68d68ef0d --- /dev/null +++ b/src/SDL2/external/jpeg-9/makefile.bcc @@ -0,0 +1,292 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Borland C on MS-DOS or OS/2. +# It works with Borland C++ for DOS, revision 3.0 or later, +# and has been tested with Borland C++ for OS/2. +# Watch out for optimization bugs in the OS/2 compilers --- see notes below! +# Thanks to Tom Wright and Ge' Weijers (original DOS) and +# Ken Porter (OS/2) for this file. + +# Read installation instructions before saying "make" !! + +# Are we under DOS or OS/2? +!if !$d(DOS) && !$d(OS2) +!if $d(__OS2__) +OS2=1 +!else +DOS=1 +!endif +!endif + +# The name of your C compiler: +CC= bcc + +# You may need to adjust these cc options: +!if $d(DOS) +CFLAGS= -O2 -mm -w-par -w-stu -w-ccc -w-rch +!else +CFLAGS= -O1 -w-par -w-stu -w-ccc -w-rch +!endif +# -O2 enables full code optimization (for pre-3.0 Borland C++, use -O -G -Z). +# -O2 is buggy in Borland OS/2 C++ revision 2.0, so use -O1 there for now. +# If you have Borland OS/2 C++ revision 1.0, use -O or no optimization at all. +# -mm selects medium memory model (near data, far code pointers; DOS only!) +# -w-par suppresses warnings about unused function parameters +# -w-stu suppresses warnings about incomplete structures +# -w-ccc suppresses warnings about compile-time-constant conditions +# -w-rch suppresses warnings about unreachable code +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +!if $d(DOS) +LDFLAGS= -mm +# memory model option here must match CFLAGS! +!else +LDFLAGS= +# -lai full-screen app +# -lc case-significant link +!endif + +# Put here the object file name for the correct system-dependent memory +# manager file. +# For DOS, we recommend jmemdos.c and jmemdosa.asm. +# For OS/2, we recommend jmemnobs.c (flat memory!) +# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. +!if $d(DOS) +SYSDEPMEM= jmemdos.obj jmemdosa.obj +SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj +!else +SYSDEPMEM= jmemnobs.obj +SYSDEPMEMLIB= +jmemnobs.obj +!endif + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ + makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ + makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ + makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ + makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ + makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + - del libjpeg.lib + tlib libjpeg.lib /E /C @&&| ++jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj +jcparam.obj & ++jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj & ++jcprepct.obj +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & ++jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj & ++jdapistd.obj +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & ++jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj +jdcoefct.obj & ++jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj & ++jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj +jdmerge.obj & ++jaricom.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj & +$(SYSDEPMEMLIB) +| + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib + +rdjpgcom.exe: rdjpgcom.c +!if $d(DOS) + $(CC) -ms -O rdjpgcom.c +!else + $(CC) $(CFLAGS) rdjpgcom.c +!endif + +# On DOS, wrjpgcom needs large model so it can malloc a 64K chunk +wrjpgcom.exe: wrjpgcom.c +!if $d(DOS) + $(CC) -ml -O wrjpgcom.c +!else + $(CC) $(CFLAGS) wrjpgcom.c +!endif + +# This "{}" syntax allows Borland Make to "batch" source files. +# In this way, each run of the compiler can build many modules. +.c.obj: + $(CC) $(CFLAGS) -c{ $<} + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + - del *.obj + - del libjpeg.lib + - del cjpeg.exe + - del djpeg.exe + - del jpegtran.exe + - del rdjpgcom.exe + - del wrjpgcom.exe + - del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + - del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg +!if $d(DOS) + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg +!else + echo n > n.tmp + comp testimg.ppm testout.ppm < n.tmp + comp testimg.bmp testout.bmp < n.tmp + comp testimg.jpg testout.jpg < n.tmp + comp testimg.ppm testoutp.ppm < n.tmp + comp testimgp.jpg testoutp.jpg < n.tmp + comp testorig.jpg testoutt.jpg < n.tmp + del n.tmp +!endif + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +jmemdosa.obj: jmemdosa.asm + tasm /mx jmemdosa.asm diff --git a/src/SDL2/external/jpeg-9/makefile.dj b/src/SDL2/external/jpeg-9/makefile.dj new file mode 100644 index 000000000..f37c12168 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makefile.dj @@ -0,0 +1,227 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for DJGPP (Delorie's GNU C port on MS-DOS), v2.0 or later. +# Thanks to Frank J. Donahoe for this version. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= gcc + +# You may need to adjust these cc options: +CFLAGS= -O2 -Wall -I. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +LDFLAGS= -s + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= + +# Put here the object file name for the correct system-dependent memory +# manager file. For DJGPP this is usually jmemnobs.o, but you could +# use jmemname.o if you want to use named temp files instead of swap space. +SYSDEPMEM= jmemnobs.o + +# miscellaneous OS-dependent stuff +# linker +LN= $(CC) +# file deletion command +RM= del +# library (.a) file creation command +AR= ar rc +# second step in .a creation (use "touch" if not needed) +AR2= ranlib + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ + makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ + makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ + makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ + makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ + makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.a +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.a cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.a: $(LIBOBJECTS) + $(RM) libjpeg.a + $(AR) libjpeg.a $(LIBOBJECTS) + $(AR2) libjpeg.a + +cjpeg.exe: $(COBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o cjpeg.exe $(COBJECTS) libjpeg.a $(LDLIBS) + +djpeg.exe: $(DOBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o djpeg.exe $(DOBJECTS) libjpeg.a $(LDLIBS) + +jpegtran.exe: $(TROBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o jpegtran.exe $(TROBJECTS) libjpeg.a $(LDLIBS) + +rdjpgcom.exe: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom.exe rdjpgcom.o $(LDLIBS) + +wrjpgcom.exe: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom.exe wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + $(RM) *.o + $(RM) cjpeg.exe + $(RM) djpeg.exe + $(RM) jpegtran.exe + $(RM) rdjpgcom.exe + $(RM) wrjpgcom.exe + $(RM) libjpeg.a + $(RM) testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + $(RM) testout*.* + ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + ./cjpeg -dct int -outfile testout.jpg testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + ./jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/SDL2/external/jpeg-9/makefile.manx b/src/SDL2/external/jpeg-9/makefile.manx new file mode 100644 index 000000000..57a1bb931 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makefile.manx @@ -0,0 +1,221 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Amiga systems using Manx Aztec C ver 5.x. +# Thanks to D.J. James (djjames@cup.portal.com) for this version. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= cc + +# You may need to adjust these cc options: +# Uncomment for generic 68000 code (will work on any Amiga) +ARCHFLAGS= -sn + +# Uncomment for 68020/68030 code (faster, but won't run on 68000 CPU) +#ARCHFLAGS= -c2 + +CFLAGS= -MC -MD $(ARCHFLAGS) -spfam -r4 + +# Link-time cc options: +LDFLAGS= -g + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= -lml -lcl + +# Put here the object file name for the correct system-dependent memory +# manager file. For Amiga we recommend jmemname.o. +SYSDEPMEM= jmemname.o + +# miscellaneous OS-dependent stuff +# linker +LN= ln +# file deletion command +RM= delete quiet +# library (.lib) file creation command +AR= lb + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ + makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ + makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ + makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ + makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ + makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.lib cjpeg djpeg jpegtran rdjpgcom wrjpgcom + +libjpeg.lib: $(LIBOBJECTS) + -$(RM) libjpeg.lib + $(AR) libjpeg.lib $(LIBOBJECTS) + +cjpeg: $(COBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.lib $(LDLIBS) + +djpeg: $(DOBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.lib $(LDLIBS) + +jpegtran: $(TROBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.lib $(LDLIBS) + +rdjpgcom: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) + +wrjpgcom: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + -$(RM) *.o cjpeg djpeg jpegtran libjpeg.lib rdjpgcom wrjpgcom + -$(RM) core testout*.* + +test: cjpeg djpeg jpegtran + -$(RM) testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg + cmp testimg.ppm testout.ppm + cmp testimg.bmp testout.bmp + cmp testimg.jpg testout.jpg + cmp testimg.ppm testoutp.ppm + cmp testimgp.jpg testoutp.jpg + cmp testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/SDL2/external/jpeg-9/makefile.mc6 b/src/SDL2/external/jpeg-9/makefile.mc6 new file mode 100644 index 000000000..7dd37f19f --- /dev/null +++ b/src/SDL2/external/jpeg-9/makefile.mc6 @@ -0,0 +1,256 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Microsoft C for MS-DOS, version 6.00A and up. +# Use NMAKE, not Microsoft's brain-damaged MAKE. +# Thanks to Alan Wright and Chris Turner of Olivetti Research Ltd. + +# Read installation instructions before saying "nmake" !! + +# You may need to adjust these compiler options: +CFLAGS = -AM -Oecigt -Gs -W3 +# -AM medium memory model (or use -AS for small model, if you remove features) +# -Oecigt -Gs maximum safe optimisation (-Ol has bugs in MSC 6.00A) +# -W3 warning level 3 +# You might also want to add -G2 if you have an 80286, etc. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Jan-Herman Buining suggests the following switches for MS C 8.0 and a 486: +# CFLAGS = /AM /f- /FPi87 /G3 /Gs /Gy /Ob1 /Oc /Oe /Og /Oi /Ol /On /Oo /Ot \ +# /OV4 /W3 +# except for jquant1.c, which must be compiled with /Oo- to avoid a compiler +# crash. + +# Ingar Steinsland suggests the following switches when building +# a 16-bit Windows DLL: +# CFLAGS = -ALw -Gsw -Zpe -W3 -O2 -Zi -Zd + +# Put here the object file name for the correct system-dependent memory +# manager file. For DOS, we recommend jmemdos.c and jmemdosa.asm. +# (But not for Windows; see install.txt if you use this makefile for Windows.) +SYSDEPMEM= jmemdos.obj jmemdosa.obj +# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. +SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ + makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ + makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ + makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ + makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ + makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + +# need linker response file because file list > 128 chars +RFILE = libjpeg.ans + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) $(RFILE) + del libjpeg.lib + lib @$(RFILE) + +# linker response file for building libjpeg.lib +$(RFILE) : makefile + del $(RFILE) + echo libjpeg.lib >$(RFILE) +# silly want-to-create-it prompt: + echo y >>$(RFILE) + echo +jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj & >>$(RFILE) + echo +jcparam.obj +jdatadst.obj +jcinit.obj +jcmaster.obj & >>$(RFILE) + echo +jcmarker.obj +jcmainct.obj +jcprepct.obj & >>$(RFILE) + echo +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & >>$(RFILE) + echo +jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj & >>$(RFILE) + echo +jfdctint.obj +jdapimin.obj +jdapistd.obj & >>$(RFILE) + echo +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & >>$(RFILE) + echo +jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj & >>$(RFILE) + echo +jdcoefct.obj +jdpostct.obj +jddctmgr.obj & >>$(RFILE) + echo +jidctfst.obj +jidctflt.obj +jidctint.obj & >>$(RFILE) + echo +jdsample.obj +jdcolor.obj +jquant1.obj & >>$(RFILE) + echo +jquant2.obj +jdmerge.obj +jaricom.obj +jcomapi.obj & >>$(RFILE) + echo +jutils.obj +jerror.obj +jmemmgr.obj & >>$(RFILE) + echo $(SYSDEPMEMLIB) ; >>$(RFILE) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + echo $(COBJECTS) >cjpeg.lst + link /STACK:4096 /EXEPACK @cjpeg.lst, cjpeg.exe, , libjpeg.lib, ; + del cjpeg.lst + +djpeg.exe: $(DOBJECTS) libjpeg.lib + echo $(DOBJECTS) >djpeg.lst + link /STACK:4096 /EXEPACK @djpeg.lst, djpeg.exe, , libjpeg.lib, ; + del djpeg.lst + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + link /STACK:4096 /EXEPACK $(TROBJECTS), jpegtran.exe, , libjpeg.lib, ; + +rdjpgcom.exe: rdjpgcom.c + $(CC) -AS -O -W3 rdjpgcom.c + +# wrjpgcom needs large model so it can malloc a 64K chunk +wrjpgcom.exe: wrjpgcom.c + $(CC) -AL -O -W3 wrjpgcom.c + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + del *.obj + del libjpeg.lib + del cjpeg.exe + del djpeg.exe + del jpegtran.exe + del rdjpgcom.exe + del wrjpgcom.exe + del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +jmemdosa.obj : jmemdosa.asm + masm /mx $*; diff --git a/src/SDL2/external/jpeg-9/makefile.mms b/src/SDL2/external/jpeg-9/makefile.mms new file mode 100644 index 000000000..534930605 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makefile.mms @@ -0,0 +1,225 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for use with MMS on Digital VMS systems. +# Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) +# and Tim Bell (tbell@netcom.com) for their help. + +# Read installation instructions before saying "MMS" !! + +# You may need to adjust these cc options: +CFLAGS= $(CFLAGS) /NoDebug /Optimize +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via /Define switches here. +.ifdef ALPHA +OPT= +.else +OPT= ,Sys$Disk:[]MAKVMS.OPT/Option +.endif + +# Put here the object file name for the correct system-dependent memory +# manager file. For Unix this is usually jmemnobs.o, but you may want +# to use jmemansi.o or jmemname.o if you have limited swap space. +SYSDEPMEM= jmemnobs.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ + makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ + makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ + makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ + makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ + makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.olb +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj +# objectfile lists with commas --- what a crock +COBJLIST= cjpeg.obj,rdppm.obj,rdgif.obj,rdtarga.obj,rdrle.obj,rdbmp.obj,\ + rdswitch.obj,cdjpeg.obj +DOBJLIST= djpeg.obj,wrppm.obj,wrgif.obj,wrtarga.obj,wrrle.obj,wrbmp.obj,\ + rdcolmap.obj,cdjpeg.obj +TROBJLIST= jpegtran.obj,rdswitch.obj,cdjpeg.obj,transupp.obj +LIBOBJLIST= jaricom.obj,jcapimin.obj,jcapistd.obj,jcarith.obj,jctrans.obj,\ + jcparam.obj,jdatadst.obj,jcinit.obj,jcmaster.obj,jcmarker.obj,\ + jcmainct.obj,jcprepct.obj,jccoefct.obj,jccolor.obj,jcsample.obj,\ + jchuff.obj,jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj,jfdctint.obj,\ + jdapimin.obj,jdapistd.obj,jdarith.obj,jdtrans.obj,jdatasrc.obj,\ + jdmaster.obj,jdinput.obj,jdmarker.obj,jdhuff.obj,jdmainct.obj,\ + jdcoefct.obj,jdpostct.obj,jddctmgr.obj,jidctfst.obj,jidctflt.obj,\ + jidctint.obj,jdsample.obj,jdcolor.obj,jquant1.obj,jquant2.obj,\ + jdmerge.obj,jcomapi.obj,jutils.obj,jerror.obj,jmemmgr.obj,$(SYSDEPMEM) + + +.first + @- Define /NoLog Sys Sys$Library + +ALL : libjpeg.olb cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + @ Continue + +libjpeg.olb : $(LIBOBJECTS) + Library /Create libjpeg.olb $(LIBOBJLIST) + +cjpeg.exe : $(COBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = cjpeg.exe $(COBJLIST),libjpeg.olb/Library$(OPT) + +djpeg.exe : $(DOBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = djpeg.exe $(DOBJLIST),libjpeg.olb/Library$(OPT) + +jpegtran.exe : $(TROBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = jpegtran.exe $(TROBJLIST),libjpeg.olb/Library$(OPT) + +rdjpgcom.exe : rdjpgcom.obj + $(LINK) $(LFLAGS) /Executable = rdjpgcom.exe rdjpgcom.obj$(OPT) + +wrjpgcom.exe : wrjpgcom.obj + $(LINK) $(LFLAGS) /Executable = wrjpgcom.exe wrjpgcom.obj$(OPT) + +jconfig.h : jconfig.vms + @- Copy jconfig.vms jconfig.h + +clean : + @- Set Protection = Owner:RWED *.*;-1 + @- Set Protection = Owner:RWED *.OBJ + - Purge /NoLog /NoConfirm *.* + - Delete /NoLog /NoConfirm *.OBJ; + +test : cjpeg.exe djpeg.exe jpegtran.exe + mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm + mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg + - Backup /Compare/Log testimg.ppm testout.ppm + - Backup /Compare/Log testimg.bmp testout.bmp + - Backup /Compare/Log testimg.jpg testout.jpg + - Backup /Compare/Log testimg.ppm testoutp.ppm + - Backup /Compare/Log testimgp.jpg testoutp.jpg + - Backup /Compare/Log testorig.jpg testoutt.jpg + + +jaricom.obj : jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj : jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj : jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj : jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj : jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj : jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj : jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj : jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj : jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj : jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj : jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj : jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj : jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj : jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj : jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj : jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj : jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj : jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj : jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj : jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj : jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj : jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj : jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj : jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj : jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj : jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj : jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj : jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj : jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj : jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj : jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj : jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj : jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj : jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj : jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj : jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj : jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj : jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj : jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj : jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj : jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj : jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj : jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj : jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj : jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj : jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj : jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj : jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj : jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj : jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj : cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj : djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj : jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj : rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj : wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj : cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj : rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj : rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj : transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj : rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj : wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj : rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj : wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj : rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj : wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj : rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj : wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj : rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj : wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/SDL2/external/jpeg-9/makefile.sas b/src/SDL2/external/jpeg-9/makefile.sas new file mode 100644 index 000000000..ba0d63b97 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makefile.sas @@ -0,0 +1,259 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Amiga systems using SAS C 6.0 and up. +# Thanks to Ed Hanway, Mark Rinfret, and Jim Zepeda. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= sc + +# You may need to adjust these cc options: +# Uncomment the following lines for generic 680x0 version +ARCHFLAGS= cpu=any +SUFFIX= + +# Uncomment the following lines for 68030-only version +#ARCHFLAGS= cpu=68030 +#SUFFIX=.030 + +CFLAGS= nostackcheck data=near parms=register optimize $(ARCHFLAGS) \ + ignore=104 ignore=304 ignore=306 +# ignore=104 disables warnings for mismatched const qualifiers +# ignore=304 disables warnings for variables being optimized out +# ignore=306 disables warnings for the inlining of functions +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via define switches here. + +# Link-time cc options: +LDFLAGS= SC SD ND BATCH + +# To link any special libraries, add the necessary commands here. +LDLIBS= LIB:scm.lib LIB:sc.lib + +# Put here the object file name for the correct system-dependent memory +# manager file. For Amiga we recommend jmemname.o. +SYSDEPMEM= jmemname.o + +# miscellaneous OS-dependent stuff +# linker +LN= slink +# file deletion command +RM= delete quiet +# library (.lib) file creation command +AR= oml + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ + makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ + makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ + makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ + makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ + makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.lib cjpeg$(SUFFIX) djpeg$(SUFFIX) jpegtran$(SUFFIX) rdjpgcom$(SUFFIX) wrjpgcom$(SUFFIX) + +# note: do several AR steps to avoid command line length limitations + +libjpeg.lib: $(LIBOBJECTS) + -$(RM) libjpeg.lib + $(AR) libjpeg.lib r $(CLIBOBJECTS) + $(AR) libjpeg.lib r $(DLIBOBJECTS) + $(AR) libjpeg.lib r $(COMOBJECTS) + +cjpeg$(SUFFIX): $(COBJECTS) libjpeg.lib + $(LN) + +# You may want to adjust these compiler options: +CFLAGS= $(cflags) $(cdebug) $(cvars) -I. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time options: +LDFLAGS= $(ldebug) $(conlflags) + +# To link any special libraries, add the necessary commands here. +LDLIBS= $(conlibs) + +# Put here the object file name for the correct system-dependent memory +# manager file. For NT we suggest jmemnobs.obj, which expects the OS to +# provide adequate virtual memory. +SYSDEPMEM= jmemnobs.obj + +# miscellaneous OS-dependent stuff +# file deletion command +RM= del + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ + makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ + makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ + makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ + makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ + makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + +# Template command for compiling .c to .obj +.c.obj: + $(cc) $(CFLAGS) $*.c + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + $(RM) libjpeg.lib + lib -out:libjpeg.lib $(LIBOBJECTS) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:cjpeg.exe $(COBJECTS) libjpeg.lib $(LDLIBS) + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:djpeg.exe $(DOBJECTS) libjpeg.lib $(LDLIBS) + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:jpegtran.exe $(TROBJECTS) libjpeg.lib $(LDLIBS) + +rdjpgcom.exe: rdjpgcom.obj + $(link) $(LDFLAGS) -out:rdjpgcom.exe rdjpgcom.obj $(LDLIBS) + +wrjpgcom.exe: wrjpgcom.obj + $(link) $(LDFLAGS) -out:wrjpgcom.exe wrjpgcom.obj $(LDLIBS) + + +clean: + $(RM) *.obj *.exe libjpeg.lib + $(RM) testout* + +setup-vc6: + ren jconfig.vc jconfig.h + ren makejdsw.vc6 jpeg.dsw + ren makeadsw.vc6 apps.dsw + ren makejmak.vc6 jpeg.mak + ren makejdep.vc6 jpeg.dep + ren makejdsp.vc6 jpeg.dsp + ren makecmak.vc6 cjpeg.mak + ren makecdep.vc6 cjpeg.dep + ren makecdsp.vc6 cjpeg.dsp + ren makedmak.vc6 djpeg.mak + ren makeddep.vc6 djpeg.dep + ren makeddsp.vc6 djpeg.dsp + ren maketmak.vc6 jpegtran.mak + ren maketdep.vc6 jpegtran.dep + ren maketdsp.vc6 jpegtran.dsp + ren makermak.vc6 rdjpgcom.mak + ren makerdep.vc6 rdjpgcom.dep + ren makerdsp.vc6 rdjpgcom.dsp + ren makewmak.vc6 wrjpgcom.mak + ren makewdep.vc6 wrjpgcom.dep + ren makewdsp.vc6 wrjpgcom.dsp + +setup-v10: + ren jconfig.vc jconfig.h + ren makejsln.v10 jpeg.sln + ren makeasln.v10 apps.sln + ren makejvcx.v10 jpeg.vcxproj + ren makejfil.v10 jpeg.vcxproj.filters + ren makecvcx.v10 cjpeg.vcxproj + ren makecfil.v10 cjpeg.vcxproj.filters + ren makedvcx.v10 djpeg.vcxproj + ren makedfil.v10 djpeg.vcxproj.filters + ren maketvcx.v10 jpegtran.vcxproj + ren maketfil.v10 jpegtran.vcxproj.filters + ren makervcx.v10 rdjpgcom.vcxproj + ren makerfil.v10 rdjpgcom.vcxproj.filters + ren makewvcx.v10 wrjpgcom.vcxproj + ren makewfil.v10 wrjpgcom.vcxproj.filters + +test: + IF EXIST testout* $(RM) testout* + .\djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + .\djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + .\cjpeg -dct int -outfile testout.jpg testimg.ppm + .\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + .\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + .\jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + +test-build: + IF EXIST testout* $(RM) testout* + .\djpeg\Release\djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + .\djpeg\Release\djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + .\cjpeg\Release\cjpeg -dct int -outfile testout.jpg testimg.ppm + .\djpeg\Release\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + .\cjpeg\Release\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + .\jpegtran\Release\jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/SDL2/external/jpeg-9/makefile.vms b/src/SDL2/external/jpeg-9/makefile.vms new file mode 100644 index 000000000..a07d070d8 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makefile.vms @@ -0,0 +1,142 @@ +$! Makefile for Independent JPEG Group's software +$! +$! This is a command procedure for Digital VMS systems that do not have MMS. +$! It builds the JPEG software by brute force, recompiling everything whether +$! or not it is necessary. It then runs the basic self-test. +$! Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) +$! and Tim Bell (tbell@netcom.com) for their help. +$! +$! Read installation instructions before running this!! +$! +$ If F$Mode () .eqs. "INTERACTIVE" +$ Then +$ VERIFY = F$Verify (0) +$ Else +$ VERIFY = F$Verify (1) +$ EndIf +$ On Control_Y Then GoTo End +$ On Error Then GoTo End +$ +$ If F$GetSyi ("HW_MODEL") .gt. 1023 +$ Then +$ OPT = "" +$ Else +$ OPT = ",Sys$Disk:[]makvms.opt/Option" +$ EndIf +$ +$ DoCompile := CC /NoDebug /Optimize /NoList +$! +$ DoCompile jaricom.c +$ DoCompile jcapimin.c +$ DoCompile jcapistd.c +$ DoCompile jcarith.c +$ DoCompile jctrans.c +$ DoCompile jcparam.c +$ DoCompile jdatadst.c +$ DoCompile jcinit.c +$ DoCompile jcmaster.c +$ DoCompile jcmarker.c +$ DoCompile jcmainct.c +$ DoCompile jcprepct.c +$ DoCompile jccoefct.c +$ DoCompile jccolor.c +$ DoCompile jcsample.c +$ DoCompile jchuff.c +$ DoCompile jcdctmgr.c +$ DoCompile jfdctfst.c +$ DoCompile jfdctflt.c +$ DoCompile jfdctint.c +$ DoCompile jdapimin.c +$ DoCompile jdapistd.c +$ DoCompile jdarith.c +$ DoCompile jdtrans.c +$ DoCompile jdatasrc.c +$ DoCompile jdmaster.c +$ DoCompile jdinput.c +$ DoCompile jdmarker.c +$ DoCompile jdhuff.c +$ DoCompile jdmainct.c +$ DoCompile jdcoefct.c +$ DoCompile jdpostct.c +$ DoCompile jddctmgr.c +$ DoCompile jidctfst.c +$ DoCompile jidctflt.c +$ DoCompile jidctint.c +$ DoCompile jdsample.c +$ DoCompile jdcolor.c +$ DoCompile jquant1.c +$ DoCompile jquant2.c +$ DoCompile jdmerge.c +$ DoCompile jcomapi.c +$ DoCompile jutils.c +$ DoCompile jerror.c +$ DoCompile jmemmgr.c +$ DoCompile jmemnobs.c +$! +$ Library /Create libjpeg.olb jaricom.obj,jcapimin.obj,jcapistd.obj, - + jcarith.obj,jctrans.obj,jcparam.obj,jdatadst.obj,jcinit.obj, - + jcmaster.obj,jcmarker.obj,jcmainct.obj,jcprepct.obj,jccoefct.obj, - + jccolor.obj,jcsample.obj,jchuff.obj,jcdctmgr.obj,jfdctfst.obj, - + jfdctflt.obj,jfdctint.obj,jdapimin.obj,jdapistd.obj,jdarith.obj, - + jdtrans.obj,jdatasrc.obj,jdmaster.obj,jdinput.obj,jdmarker.obj, - + jdhuff.obj,jdmainct.obj,jdcoefct.obj,jdpostct.obj,jddctmgr.obj, - + jidctfst.obj,jidctflt.obj,jidctint.obj,jdsample.obj,jdcolor.obj, - + jquant1.obj,jquant2.obj,jdmerge.obj,jcomapi.obj,jutils.obj, - + jerror.obj,jmemmgr.obj,jmemnobs.obj +$! +$ DoCompile cjpeg.c +$ DoCompile rdppm.c +$ DoCompile rdgif.c +$ DoCompile rdtarga.c +$ DoCompile rdrle.c +$ DoCompile rdbmp.c +$ DoCompile rdswitch.c +$ DoCompile cdjpeg.c +$! +$ Link /NoMap /Executable = cjpeg.exe cjpeg.obj,rdppm.obj,rdgif.obj, - + rdtarga.obj,rdrle.obj,rdbmp.obj,rdswitch.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile djpeg.c +$ DoCompile wrppm.c +$ DoCompile wrgif.c +$ DoCompile wrtarga.c +$ DoCompile wrrle.c +$ DoCompile wrbmp.c +$ DoCompile rdcolmap.c +$ DoCompile cdjpeg.c +$! +$ Link /NoMap /Executable = djpeg.exe djpeg.obj,wrppm.obj,wrgif.obj, - + wrtarga.obj,wrrle.obj,wrbmp.obj,rdcolmap.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile jpegtran.c +$ DoCompile rdswitch.c +$ DoCompile cdjpeg.c +$ DoCompile transupp.c +$! +$ Link /NoMap /Executable = jpegtran.exe jpegtran.obj,rdswitch.obj, - + cdjpeg.obj,transupp.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile rdjpgcom.c +$ Link /NoMap /Executable = rdjpgcom.exe rdjpgcom.obj'OPT' +$! +$ DoCompile wrjpgcom.c +$ Link /NoMap /Executable = wrjpgcom.exe wrjpgcom.obj'OPT' +$! +$! Run the self-test +$! +$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg +$ mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg +$ mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm +$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg +$ mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm +$ mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg +$ Backup /Compare/Log testimg.ppm testout.ppm +$ Backup /Compare/Log testimg.bmp testout.bmp +$ Backup /Compare/Log testimg.jpg testout.jpg +$ Backup /Compare/Log testimg.ppm testoutp.ppm +$ Backup /Compare/Log testimgp.jpg testoutp.jpg +$ Backup /Compare/Log testorig.jpg testoutt.jpg +$! +$End: +$ If Verify Then Set Verify +$ Exit diff --git a/src/SDL2/external/jpeg-9/makefile.wat b/src/SDL2/external/jpeg-9/makefile.wat new file mode 100644 index 000000000..9cb8d6115 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makefile.wat @@ -0,0 +1,240 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Watcom C/C++ 10.0 on MS-DOS (using +# dos4g extender), OS/2, and Windows NT console mode. +# Thanks to Janos Haide, jhaide@btrvtech.com. + +# Read installation instructions before saying "wmake" !! + +# Uncomment line for desired system +SYSTEM=DOS +#SYSTEM=OS2 +#SYSTEM=NT + +# The name of your C compiler: +CC= wcl386 + +# You may need to adjust these cc options: +CFLAGS= -4r -ort -wx -zq -bt=$(SYSTEM) +# Caution: avoid -ol or -ox; these generate bad code with 10.0 or 10.0a. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +!ifeq SYSTEM DOS +LDFLAGS= -zq -l=dos4g +!else ifeq SYSTEM OS2 +LDFLAGS= -zq -l=os2v2 +!else ifeq SYSTEM NT +LDFLAGS= -zq -l=nt +!endif + +# Put here the object file name for the correct system-dependent memory +# manager file. jmemnobs should work fine for dos4g or OS/2 environment. +SYSDEPMEM= jmemnobs.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c & + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c & + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c & + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c & + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c & + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c & + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c & + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c & + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c & + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h & + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 & + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt & + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc & + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 & + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 & + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 & + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 & + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 & + makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 & + makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 & + makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st & + makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas & + makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat & + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas & + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp & + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg & + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) & + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj & + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj & + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj & + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj & + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj & + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj & + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj & + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj & + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj & + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + - del libjpeg.lib + * wlib -n libjpeg.lib $(LIBOBJECTS) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(COBJECTS) libjpeg.lib + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(DOBJECTS) libjpeg.lib + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(TROBJECTS) libjpeg.lib + +rdjpgcom.exe: rdjpgcom.c + $(CC) $(CFLAGS) $(LDFLAGS) rdjpgcom.c + +wrjpgcom.exe: wrjpgcom.c + $(CC) $(CFLAGS) $(LDFLAGS) wrjpgcom.c + +.c.obj: + $(CC) $(CFLAGS) -c $< + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: .SYMBOLIC + - del *.obj + - del libjpeg.lib + - del cjpeg.exe + - del djpeg.exe + - del jpegtran.exe + - del rdjpgcom.exe + - del wrjpgcom.exe + - del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe .SYMBOLIC + - del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg +!ifeq SYSTEM DOS + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg +!else + echo n > n.tmp + comp testimg.ppm testout.ppm < n.tmp + comp testimg.bmp testout.bmp < n.tmp + comp testimg.jpg testout.jpg < n.tmp + comp testimg.ppm testoutp.ppm < n.tmp + comp testimgp.jpg testoutp.jpg < n.tmp + comp testorig.jpg testoutt.jpg < n.tmp + del n.tmp +!endif + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/SDL2/external/jpeg-9/makejdep.vc6 b/src/SDL2/external/jpeg-9/makejdep.vc6 new file mode 100644 index 000000000..1065b2140 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makejdep.vc6 @@ -0,0 +1,423 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von jpeg.mak + +.\jaricom.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcapimin.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcapistd.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcarith.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jccoefct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jccolor.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcdctmgr.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jchuff.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcinit.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmainct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmarker.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmaster.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcomapi.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcparam.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcprepct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcsample.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jctrans.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdapimin.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdapistd.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdarith.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdatadst.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jdatasrc.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jdcoefct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdcolor.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jddctmgr.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdhuff.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdinput.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmainct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmarker.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmaster.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmerge.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdpostct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdsample.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdtrans.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jerror.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\jfdctflt.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jfdctfst.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jfdctint.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctflt.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctfst.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctint.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jmemmgr.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmemsys.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jmemnobs.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmemsys.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jquant1.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jquant2.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jutils.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + diff --git a/src/SDL2/external/jpeg-9/makejdsp.vc6 b/src/SDL2/external/jpeg-9/makejdsp.vc6 new file mode 100644 index 000000000..738f1ab4b --- /dev/null +++ b/src/SDL2/external/jpeg-9/makejdsp.vc6 @@ -0,0 +1,285 @@ +# Microsoft Developer Studio Project File - Name="jpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Static Library" 0x0104 + +CFG=jpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpeg - Win32" (basierend auf "Win32 (x86) Static Library") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\Release" +# PROP BASE Intermediate_Dir ".\Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\Release" +# PROP Intermediate_Dir ".\Release" +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c +# ADD BASE RSC /l 0x407 +# ADD RSC /l 0x407 +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LIB32=link.exe -lib +# ADD BASE LIB32 /nologo +# ADD LIB32 /nologo +# Begin Target + +# Name "jpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\jaricom.c +# End Source File +# Begin Source File + +SOURCE=.\jcapimin.c +# End Source File +# Begin Source File + +SOURCE=.\jcapistd.c +# End Source File +# Begin Source File + +SOURCE=.\jcarith.c +# End Source File +# Begin Source File + +SOURCE=.\jccoefct.c +# End Source File +# Begin Source File + +SOURCE=.\jccolor.c +# End Source File +# Begin Source File + +SOURCE=.\jcdctmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jchuff.c +# End Source File +# Begin Source File + +SOURCE=.\jcinit.c +# End Source File +# Begin Source File + +SOURCE=.\jcmainct.c +# End Source File +# Begin Source File + +SOURCE=.\jcmarker.c +# End Source File +# Begin Source File + +SOURCE=.\jcmaster.c +# End Source File +# Begin Source File + +SOURCE=.\jcomapi.c +# End Source File +# Begin Source File + +SOURCE=.\jcparam.c +# End Source File +# Begin Source File + +SOURCE=.\jcprepct.c +# End Source File +# Begin Source File + +SOURCE=.\jcsample.c +# End Source File +# Begin Source File + +SOURCE=.\jctrans.c +# End Source File +# Begin Source File + +SOURCE=.\jdapimin.c +# End Source File +# Begin Source File + +SOURCE=.\jdapistd.c +# End Source File +# Begin Source File + +SOURCE=.\jdarith.c +# End Source File +# Begin Source File + +SOURCE=.\jdatadst.c +# End Source File +# Begin Source File + +SOURCE=.\jdatasrc.c +# End Source File +# Begin Source File + +SOURCE=.\jdcoefct.c +# End Source File +# Begin Source File + +SOURCE=.\jdcolor.c +# End Source File +# Begin Source File + +SOURCE=.\jddctmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jdhuff.c +# End Source File +# Begin Source File + +SOURCE=.\jdinput.c +# End Source File +# Begin Source File + +SOURCE=.\jdmainct.c +# End Source File +# Begin Source File + +SOURCE=.\jdmarker.c +# End Source File +# Begin Source File + +SOURCE=.\jdmaster.c +# End Source File +# Begin Source File + +SOURCE=.\jdmerge.c +# End Source File +# Begin Source File + +SOURCE=.\jdpostct.c +# End Source File +# Begin Source File + +SOURCE=.\jdsample.c +# End Source File +# Begin Source File + +SOURCE=.\jdtrans.c +# End Source File +# Begin Source File + +SOURCE=.\jerror.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctflt.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctfst.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctint.c +# End Source File +# Begin Source File + +SOURCE=.\jidctflt.c +# End Source File +# Begin Source File + +SOURCE=.\jidctfst.c +# End Source File +# Begin Source File + +SOURCE=.\jidctint.c +# End Source File +# Begin Source File + +SOURCE=.\jmemmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jmemnobs.c +# End Source File +# Begin Source File + +SOURCE=.\jquant1.c +# End Source File +# Begin Source File + +SOURCE=.\jquant2.c +# End Source File +# Begin Source File + +SOURCE=.\jutils.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jdct.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmemsys.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpegint.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/SDL2/external/jpeg-9/makejdsw.vc6 b/src/SDL2/external/jpeg-9/makejdsw.vc6 new file mode 100644 index 000000000..d11fab1d5 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makejdsw.vc6 @@ -0,0 +1,29 @@ +Microsoft Developer Studio Workspace File, Format Version 6.00 +# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GEL™SCHT WERDEN! + +############################################################################### + +Project: "jpeg"=".\jpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Global: + +Package=<5> +{{{ +}}} + +Package=<3> +{{{ +}}} + +############################################################################### + diff --git a/src/SDL2/external/jpeg-9/makejfil.v10 b/src/SDL2/external/jpeg-9/makejfil.v10 new file mode 100644 index 000000000..654bfc098 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makejfil.v10 @@ -0,0 +1,186 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/makejmak.vc6 b/src/SDL2/external/jpeg-9/makejmak.vc6 new file mode 100644 index 000000000..1107336b2 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makejmak.vc6 @@ -0,0 +1,425 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on jpeg.dsp +!IF "$(CFG)" == "" +CFG=jpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. jpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "jpeg - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpeg - Win32" (basierend auf "Win32 (x86) Static Library") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +OUTDIR=.\Release +INTDIR=.\Release +# Begin Custom Macros +OutDir=.\Release +# End Custom Macros + +ALL : "$(OUTDIR)\jpeg.lib" + + +CLEAN : + -@erase "$(INTDIR)\jaricom.obj" + -@erase "$(INTDIR)\jcapimin.obj" + -@erase "$(INTDIR)\jcapistd.obj" + -@erase "$(INTDIR)\jcarith.obj" + -@erase "$(INTDIR)\jccoefct.obj" + -@erase "$(INTDIR)\jccolor.obj" + -@erase "$(INTDIR)\jcdctmgr.obj" + -@erase "$(INTDIR)\jchuff.obj" + -@erase "$(INTDIR)\jcinit.obj" + -@erase "$(INTDIR)\jcmainct.obj" + -@erase "$(INTDIR)\jcmarker.obj" + -@erase "$(INTDIR)\jcmaster.obj" + -@erase "$(INTDIR)\jcomapi.obj" + -@erase "$(INTDIR)\jcparam.obj" + -@erase "$(INTDIR)\jcprepct.obj" + -@erase "$(INTDIR)\jcsample.obj" + -@erase "$(INTDIR)\jctrans.obj" + -@erase "$(INTDIR)\jdapimin.obj" + -@erase "$(INTDIR)\jdapistd.obj" + -@erase "$(INTDIR)\jdarith.obj" + -@erase "$(INTDIR)\jdatadst.obj" + -@erase "$(INTDIR)\jdatasrc.obj" + -@erase "$(INTDIR)\jdcoefct.obj" + -@erase "$(INTDIR)\jdcolor.obj" + -@erase "$(INTDIR)\jddctmgr.obj" + -@erase "$(INTDIR)\jdhuff.obj" + -@erase "$(INTDIR)\jdinput.obj" + -@erase "$(INTDIR)\jdmainct.obj" + -@erase "$(INTDIR)\jdmarker.obj" + -@erase "$(INTDIR)\jdmaster.obj" + -@erase "$(INTDIR)\jdmerge.obj" + -@erase "$(INTDIR)\jdpostct.obj" + -@erase "$(INTDIR)\jdsample.obj" + -@erase "$(INTDIR)\jdtrans.obj" + -@erase "$(INTDIR)\jerror.obj" + -@erase "$(INTDIR)\jfdctflt.obj" + -@erase "$(INTDIR)\jfdctfst.obj" + -@erase "$(INTDIR)\jfdctint.obj" + -@erase "$(INTDIR)\jidctflt.obj" + -@erase "$(INTDIR)\jidctfst.obj" + -@erase "$(INTDIR)\jidctint.obj" + -@erase "$(INTDIR)\jmemmgr.obj" + -@erase "$(INTDIR)\jmemnobs.obj" + -@erase "$(INTDIR)\jquant1.obj" + -@erase "$(INTDIR)\jquant2.obj" + -@erase "$(INTDIR)\jutils.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\jpeg.lib" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +CPP=cl.exe +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /Fp"$(INTDIR)\jpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +RSC=rc.exe +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpeg.bsc" +BSC32_SBRS= \ + +LIB32=link.exe -lib +LIB32_FLAGS=/nologo /out:"$(OUTDIR)\jpeg.lib" +LIB32_OBJS= \ + "$(INTDIR)\jaricom.obj" \ + "$(INTDIR)\jcapimin.obj" \ + "$(INTDIR)\jcapistd.obj" \ + "$(INTDIR)\jcarith.obj" \ + "$(INTDIR)\jccoefct.obj" \ + "$(INTDIR)\jccolor.obj" \ + "$(INTDIR)\jcdctmgr.obj" \ + "$(INTDIR)\jchuff.obj" \ + "$(INTDIR)\jcinit.obj" \ + "$(INTDIR)\jcmainct.obj" \ + "$(INTDIR)\jcmarker.obj" \ + "$(INTDIR)\jcmaster.obj" \ + "$(INTDIR)\jcomapi.obj" \ + "$(INTDIR)\jcparam.obj" \ + "$(INTDIR)\jcprepct.obj" \ + "$(INTDIR)\jcsample.obj" \ + "$(INTDIR)\jctrans.obj" \ + "$(INTDIR)\jdapimin.obj" \ + "$(INTDIR)\jdapistd.obj" \ + "$(INTDIR)\jdarith.obj" \ + "$(INTDIR)\jdatadst.obj" \ + "$(INTDIR)\jdatasrc.obj" \ + "$(INTDIR)\jdcoefct.obj" \ + "$(INTDIR)\jdcolor.obj" \ + "$(INTDIR)\jddctmgr.obj" \ + "$(INTDIR)\jdhuff.obj" \ + "$(INTDIR)\jdinput.obj" \ + "$(INTDIR)\jdmainct.obj" \ + "$(INTDIR)\jdmarker.obj" \ + "$(INTDIR)\jdmaster.obj" \ + "$(INTDIR)\jdmerge.obj" \ + "$(INTDIR)\jdpostct.obj" \ + "$(INTDIR)\jdsample.obj" \ + "$(INTDIR)\jdtrans.obj" \ + "$(INTDIR)\jerror.obj" \ + "$(INTDIR)\jfdctflt.obj" \ + "$(INTDIR)\jfdctfst.obj" \ + "$(INTDIR)\jfdctint.obj" \ + "$(INTDIR)\jidctflt.obj" \ + "$(INTDIR)\jidctfst.obj" \ + "$(INTDIR)\jidctint.obj" \ + "$(INTDIR)\jmemmgr.obj" \ + "$(INTDIR)\jmemnobs.obj" \ + "$(INTDIR)\jquant1.obj" \ + "$(INTDIR)\jquant2.obj" \ + "$(INTDIR)\jutils.obj" + +"$(OUTDIR)\jpeg.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS) + $(LIB32) @<< + $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS) +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("jpeg.dep") +!INCLUDE "jpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "jpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "jpeg - Win32" +SOURCE=.\jaricom.c + +"$(INTDIR)\jaricom.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcapimin.c + +"$(INTDIR)\jcapimin.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcapistd.c + +"$(INTDIR)\jcapistd.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcarith.c + +"$(INTDIR)\jcarith.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jccoefct.c + +"$(INTDIR)\jccoefct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jccolor.c + +"$(INTDIR)\jccolor.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcdctmgr.c + +"$(INTDIR)\jcdctmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jchuff.c + +"$(INTDIR)\jchuff.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcinit.c + +"$(INTDIR)\jcinit.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmainct.c + +"$(INTDIR)\jcmainct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmarker.c + +"$(INTDIR)\jcmarker.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmaster.c + +"$(INTDIR)\jcmaster.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcomapi.c + +"$(INTDIR)\jcomapi.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcparam.c + +"$(INTDIR)\jcparam.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcprepct.c + +"$(INTDIR)\jcprepct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcsample.c + +"$(INTDIR)\jcsample.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jctrans.c + +"$(INTDIR)\jctrans.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdapimin.c + +"$(INTDIR)\jdapimin.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdapistd.c + +"$(INTDIR)\jdapistd.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdarith.c + +"$(INTDIR)\jdarith.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdatadst.c + +"$(INTDIR)\jdatadst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdatasrc.c + +"$(INTDIR)\jdatasrc.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdcoefct.c + +"$(INTDIR)\jdcoefct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdcolor.c + +"$(INTDIR)\jdcolor.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jddctmgr.c + +"$(INTDIR)\jddctmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdhuff.c + +"$(INTDIR)\jdhuff.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdinput.c + +"$(INTDIR)\jdinput.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmainct.c + +"$(INTDIR)\jdmainct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmarker.c + +"$(INTDIR)\jdmarker.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmaster.c + +"$(INTDIR)\jdmaster.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmerge.c + +"$(INTDIR)\jdmerge.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdpostct.c + +"$(INTDIR)\jdpostct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdsample.c + +"$(INTDIR)\jdsample.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdtrans.c + +"$(INTDIR)\jdtrans.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jerror.c + +"$(INTDIR)\jerror.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctflt.c + +"$(INTDIR)\jfdctflt.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctfst.c + +"$(INTDIR)\jfdctfst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctint.c + +"$(INTDIR)\jfdctint.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctflt.c + +"$(INTDIR)\jidctflt.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctfst.c + +"$(INTDIR)\jidctfst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctint.c + +"$(INTDIR)\jidctint.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jmemmgr.c + +"$(INTDIR)\jmemmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jmemnobs.c + +"$(INTDIR)\jmemnobs.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jquant1.c + +"$(INTDIR)\jquant1.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jquant2.c + +"$(INTDIR)\jquant2.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jutils.c + +"$(INTDIR)\jutils.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/SDL2/external/jpeg-9/makejsln.v10 b/src/SDL2/external/jpeg-9/makejsln.v10 new file mode 100644 index 000000000..6a5befdf9 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makejsln.v10 @@ -0,0 +1,17 @@ +‹¯¨ +Microsoft Visual Studio Solution File, Format Version 11.00 +# Visual C++ Express 2010 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpeg", "jpeg.vcxproj", "{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Release|Win32 = Release|Win32 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.ActiveCfg = Release|Win32 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.Build.0 = Release|Win32 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/SDL2/external/jpeg-9/makejvcx.v10 b/src/SDL2/external/jpeg-9/makejvcx.v10 new file mode 100644 index 000000000..ccee28789 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makejvcx.v10 @@ -0,0 +1,112 @@ +‹¯¨ + + + + Release + Win32 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Disabled + false + + + + + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1} + Win32Proj + jpeg + + + + StaticLibrary + false + true + Unicode + + + + + + + + + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_LIB;_CRT_SECURE_NO_WARNINGS + true + true + + + Windows + true + true + true + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/makeproj.mac b/src/SDL2/external/jpeg-9/makeproj.mac new file mode 100644 index 000000000..e5b510238 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makeproj.mac @@ -0,0 +1,213 @@ +-- +-- makeproj.mac +-- +-- This AppleScript builds Code Warrior PRO Release 2 project files for the +-- libjpeg library as well as the test programs 'cjpeg', 'djpeg', 'jpegtran'. +-- (We'd distribute real project files, except they're not text +-- and would create maintenance headaches.) +-- +-- The script then compiles and links the library and the test programs. +-- NOTE: if you haven't already created a 'jconfig.h' file, the script +-- automatically copies 'jconfig.mac' to 'jconfig.h'. +-- +-- To use this script, you must have AppleScript 1.1 or later installed +-- and a suitable AppleScript editor like Script Editor or Script Debugger +-- (http://www.latenightsw.com). Open this file with your AppleScript +-- editor and execute the "run" command to build the projects. +-- +-- Thanks to Dan Sears and Don Agro for this script. +-- Questions about this script can be addressed to dogpark@interlog.com +-- + +on run + + choose folder with prompt ">>> Select IJG source folder <<<" + set ijg_folder to result + + choose folder with prompt ">>> Select MetroWerks folder <<<" + set cw_folder to result + + -- if jconfig.h doesn't already exist, copy jconfig.mac + + tell application "Finder" + if not (exists file "jconfig.h" of ijg_folder) then + duplicate {file "jconfig.mac" of folder ijg_folder} + select file "jconfig.mac copy" of folder ijg_folder + set name of selection to "jconfig.h" + end if + end tell + + tell application "CodeWarrior IDE 2.1" + with timeout of 10000 seconds + + -- create libjpeg project + + activate + Create Project (ijg_folder as string) & "libjpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"libjpeg"} + Set Preferences of panel "PPC Project" to {File Name:"libjpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "PPC Project" to {Project Type:library} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "jaricom.c" To Segment 1 + Add Files (ijg_folder as string) & "jcapimin.c" To Segment 1 + Add Files (ijg_folder as string) & "jcapistd.c" To Segment 1 + Add Files (ijg_folder as string) & "jcarith.c" To Segment 1 + Add Files (ijg_folder as string) & "jctrans.c" To Segment 1 + Add Files (ijg_folder as string) & "jcparam.c" To Segment 1 + Add Files (ijg_folder as string) & "jdatadst.c" To Segment 1 + Add Files (ijg_folder as string) & "jcinit.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmaster.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmarker.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmainct.c" To Segment 1 + Add Files (ijg_folder as string) & "jcprepct.c" To Segment 1 + Add Files (ijg_folder as string) & "jccoefct.c" To Segment 1 + Add Files (ijg_folder as string) & "jccolor.c" To Segment 1 + Add Files (ijg_folder as string) & "jcsample.c" To Segment 1 + Add Files (ijg_folder as string) & "jchuff.c" To Segment 1 + Add Files (ijg_folder as string) & "jcdctmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctfst.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctflt.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctint.c" To Segment 1 + Add Files (ijg_folder as string) & "jdapimin.c" To Segment 1 + Add Files (ijg_folder as string) & "jdapistd.c" To Segment 1 + Add Files (ijg_folder as string) & "jdarith.c" To Segment 1 + Add Files (ijg_folder as string) & "jdtrans.c" To Segment 1 + Add Files (ijg_folder as string) & "jdatasrc.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmaster.c" To Segment 1 + Add Files (ijg_folder as string) & "jdinput.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmarker.c" To Segment 1 + Add Files (ijg_folder as string) & "jdhuff.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmainct.c" To Segment 1 + Add Files (ijg_folder as string) & "jdcoefct.c" To Segment 1 + Add Files (ijg_folder as string) & "jdpostct.c" To Segment 1 + Add Files (ijg_folder as string) & "jddctmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctfst.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctflt.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctint.c" To Segment 1 + Add Files (ijg_folder as string) & "jdsample.c" To Segment 1 + Add Files (ijg_folder as string) & "jdcolor.c" To Segment 1 + Add Files (ijg_folder as string) & "jquant1.c" To Segment 1 + Add Files (ijg_folder as string) & "jquant2.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmerge.c" To Segment 1 + Add Files (ijg_folder as string) & "jcomapi.c" To Segment 1 + Add Files (ijg_folder as string) & "jutils.c" To Segment 1 + Add Files (ijg_folder as string) & "jerror.c" To Segment 1 + Add Files (ijg_folder as string) & "jmemmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jmemmac.c" To Segment 1 + + -- compile and link the library + + Make Project + Close Project + + -- create cjpeg project + + activate + Create Project (ijg_folder as string) & "cjpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"cjpeg"} + Set Preferences of panel "PPC Project" to {File Name:"cjpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "cjpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "rdppm.c" To Segment 1 + Add Files (ijg_folder as string) & "rdgif.c" To Segment 1 + Add Files (ijg_folder as string) & "rdtarga.c" To Segment 1 + Add Files (ijg_folder as string) & "rdrle.c" To Segment 1 + Add Files (ijg_folder as string) & "rdbmp.c" To Segment 1 + Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link cjpeg + + Make Project + Close Project + + -- create djpeg project + + activate + Create Project (ijg_folder as string) & "djpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"djpeg"} + Set Preferences of panel "PPC Project" to {File Name:"djpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "djpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "wrppm.c" To Segment 1 + Add Files (ijg_folder as string) & "wrgif.c" To Segment 1 + Add Files (ijg_folder as string) & "wrtarga.c" To Segment 1 + Add Files (ijg_folder as string) & "wrrle.c" To Segment 1 + Add Files (ijg_folder as string) & "wrbmp.c" To Segment 1 + Add Files (ijg_folder as string) & "rdcolmap.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link djpeg + + Make Project + Close Project + + -- create jpegtran project + + activate + Create Project (ijg_folder as string) & "jpegtran.proj" + Set Preferences of panel "Target Settings" to {Target Name:"jpegtran"} + Set Preferences of panel "PPC Project" to {File Name:"jpegtran"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "jpegtran.c" To Segment 1 + Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "transupp.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link jpegtran + + Make Project + Close Project + + quit + + end timeout + end tell +end run diff --git a/src/SDL2/external/jpeg-9/makerdep.vc6 b/src/SDL2/external/jpeg-9/makerdep.vc6 new file mode 100644 index 000000000..94748d011 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makerdep.vc6 @@ -0,0 +1,6 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von rdjpgcom.mak + +.\rdjpgcom.c : \ + ".\jconfig.h"\ + ".\jinclude.h"\ + diff --git a/src/SDL2/external/jpeg-9/makerdsp.vc6 b/src/SDL2/external/jpeg-9/makerdsp.vc6 new file mode 100644 index 000000000..60de09af1 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makerdsp.vc6 @@ -0,0 +1,78 @@ +# Microsoft Developer Studio Project File - Name="rdjpgcom" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=rdjpgcom - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "rdjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\rdjpgcom\Release" +# PROP BASE Intermediate_Dir ".\rdjpgcom\Release" +# PROP BASE Target_Dir ".\rdjpgcom" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\rdjpgcom\Release" +# PROP Intermediate_Dir ".\rdjpgcom\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\rdjpgcom" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "rdjpgcom - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\rdjpgcom.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/SDL2/external/jpeg-9/makerfil.v10 b/src/SDL2/external/jpeg-9/makerfil.v10 new file mode 100644 index 000000000..d14914af8 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makerfil.v10 @@ -0,0 +1,30 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + + + Source Files + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/makermak.vc6 b/src/SDL2/external/jpeg-9/makermak.vc6 new file mode 100644 index 000000000..6d2d4c738 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makermak.vc6 @@ -0,0 +1,110 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on rdjpgcom.dsp +!IF "$(CFG)" == "" +CFG=rdjpgcom - Win32 +!MESSAGE Keine Konfiguration angegeben. rdjpgcom - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "rdjpgcom - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "rdjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\rdjpgcom\Release +INTDIR=.\rdjpgcom\Release +# Begin Custom Macros +OutDir=.\rdjpgcom\Release +# End Custom Macros + +ALL : "$(OUTDIR)\rdjpgcom.exe" + + +CLEAN : + -@erase "$(INTDIR)\rdjpgcom.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\rdjpgcom.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\rdjpgcom.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rdjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\rdjpgcom.exe" +LINK32_OBJS= \ + "$(INTDIR)\rdjpgcom.obj" + +"$(OUTDIR)\rdjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\rdjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("rdjpgcom.dep") +!INCLUDE "rdjpgcom.dep" +!ELSE +!MESSAGE Warning: cannot find "rdjpgcom.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "rdjpgcom - Win32" +SOURCE=.\rdjpgcom.c + +"$(INTDIR)\rdjpgcom.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/SDL2/external/jpeg-9/makervcx.v10 b/src/SDL2/external/jpeg-9/makervcx.v10 new file mode 100644 index 000000000..366d4fcbd --- /dev/null +++ b/src/SDL2/external/jpeg-9/makervcx.v10 @@ -0,0 +1,62 @@ +‹¯¨ + + + + Release + Win32 + + + + {C81513DB-78DC-46BC-BC98-82E745203976} + Win32Proj + rdjpgcom + + + + Application + false + true + Unicode + + + + + + + + + + false + $(ProjectName)\$(Configuration)\ + $(ProjectName)\$(Configuration)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/maketdep.vc6 b/src/SDL2/external/jpeg-9/maketdep.vc6 new file mode 100644 index 000000000..e177ecbf6 --- /dev/null +++ b/src/SDL2/external/jpeg-9/maketdep.vc6 @@ -0,0 +1,43 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von jpegtran.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jpegtran.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + ".\transupp.h"\ + + +.\rdswitch.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\transupp.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + ".\transupp.h"\ + diff --git a/src/SDL2/external/jpeg-9/maketdsp.vc6 b/src/SDL2/external/jpeg-9/maketdsp.vc6 new file mode 100644 index 000000000..fe1ae9a3c --- /dev/null +++ b/src/SDL2/external/jpeg-9/maketdsp.vc6 @@ -0,0 +1,122 @@ +# Microsoft Developer Studio Project File - Name="jpegtran" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=jpegtran - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpegtran - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\jpegtran\Release" +# PROP BASE Intermediate_Dir ".\jpegtran\Release" +# PROP BASE Target_Dir ".\jpegtran" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\jpegtran\Release" +# PROP Intermediate_Dir ".\jpegtran\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\jpegtran" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "jpegtran - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\jpegtran.c +# End Source File +# Begin Source File + +SOURCE=.\rdswitch.c +# End Source File +# Begin Source File + +SOURCE=.\transupp.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpegint.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# Begin Source File + +SOURCE=.\transupp.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/SDL2/external/jpeg-9/maketfil.v10 b/src/SDL2/external/jpeg-9/maketfil.v10 new file mode 100644 index 000000000..fae00941c --- /dev/null +++ b/src/SDL2/external/jpeg-9/maketfil.v10 @@ -0,0 +1,63 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/maketmak.vc6 b/src/SDL2/external/jpeg-9/maketmak.vc6 new file mode 100644 index 000000000..a0de38c06 --- /dev/null +++ b/src/SDL2/external/jpeg-9/maketmak.vc6 @@ -0,0 +1,131 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on jpegtran.dsp +!IF "$(CFG)" == "" +CFG=jpegtran - Win32 +!MESSAGE Keine Konfiguration angegeben. jpegtran - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "jpegtran - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpegtran - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\jpegtran\Release +INTDIR=.\jpegtran\Release +# Begin Custom Macros +OutDir=.\jpegtran\Release +# End Custom Macros + +ALL : "$(OUTDIR)\jpegtran.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\jpegtran.obj" + -@erase "$(INTDIR)\rdswitch.obj" + -@erase "$(INTDIR)\transupp.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\jpegtran.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpegtran.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\jpegtran.pdb" /machine:I386 /out:"$(OUTDIR)\jpegtran.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\jpegtran.obj" \ + "$(INTDIR)\rdswitch.obj" \ + "$(INTDIR)\transupp.obj" + +"$(OUTDIR)\jpegtran.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\jpegtran.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("jpegtran.dep") +!INCLUDE "jpegtran.dep" +!ELSE +!MESSAGE Warning: cannot find "jpegtran.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "jpegtran - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jpegtran.c + +"$(INTDIR)\jpegtran.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdswitch.c + +"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\transupp.c + +"$(INTDIR)\transupp.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/SDL2/external/jpeg-9/maketvcx.v10 b/src/SDL2/external/jpeg-9/maketvcx.v10 new file mode 100644 index 000000000..e2b4ea36b --- /dev/null +++ b/src/SDL2/external/jpeg-9/maketvcx.v10 @@ -0,0 +1,74 @@ +‹¯¨ + + + + Release + Win32 + + + + {025BAC50-51B5-4FFE-BC47-3F920BB4047E} + Win32Proj + jpegtran + + + + Application + false + true + Unicode + + + + + + + + + + false + $(ProjectName)\$(Configuration)\ + $(ProjectName)\$(Configuration)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/makewdep.vc6 b/src/SDL2/external/jpeg-9/makewdep.vc6 new file mode 100644 index 000000000..15929bfe4 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makewdep.vc6 @@ -0,0 +1,6 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von wrjpgcom.mak + +.\wrjpgcom.c : \ + ".\jconfig.h"\ + ".\jinclude.h"\ + diff --git a/src/SDL2/external/jpeg-9/makewdsp.vc6 b/src/SDL2/external/jpeg-9/makewdsp.vc6 new file mode 100644 index 000000000..2063b1a5c --- /dev/null +++ b/src/SDL2/external/jpeg-9/makewdsp.vc6 @@ -0,0 +1,78 @@ +# Microsoft Developer Studio Project File - Name="wrjpgcom" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=wrjpgcom - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "wrjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\wrjpgcom\Release" +# PROP BASE Intermediate_Dir ".\wrjpgcom\Release" +# PROP BASE Target_Dir ".\wrjpgcom" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\wrjpgcom\Release" +# PROP Intermediate_Dir ".\wrjpgcom\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\wrjpgcom" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "wrjpgcom - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\wrjpgcom.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/SDL2/external/jpeg-9/makewfil.v10 b/src/SDL2/external/jpeg-9/makewfil.v10 new file mode 100644 index 000000000..72c585663 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makewfil.v10 @@ -0,0 +1,30 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + + + Source Files + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/makewmak.vc6 b/src/SDL2/external/jpeg-9/makewmak.vc6 new file mode 100644 index 000000000..22b908627 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makewmak.vc6 @@ -0,0 +1,110 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on wrjpgcom.dsp +!IF "$(CFG)" == "" +CFG=wrjpgcom - Win32 +!MESSAGE Keine Konfiguration angegeben. wrjpgcom - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "wrjpgcom - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "wrjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\wrjpgcom\Release +INTDIR=.\wrjpgcom\Release +# Begin Custom Macros +OutDir=.\wrjpgcom\Release +# End Custom Macros + +ALL : "$(OUTDIR)\wrjpgcom.exe" + + +CLEAN : + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(INTDIR)\wrjpgcom.obj" + -@erase "$(OUTDIR)\wrjpgcom.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\wrjpgcom.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\wrjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\wrjpgcom.exe" +LINK32_OBJS= \ + "$(INTDIR)\wrjpgcom.obj" + +"$(OUTDIR)\wrjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\wrjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("wrjpgcom.dep") +!INCLUDE "wrjpgcom.dep" +!ELSE +!MESSAGE Warning: cannot find "wrjpgcom.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "wrjpgcom - Win32" +SOURCE=.\wrjpgcom.c + +"$(INTDIR)\wrjpgcom.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/SDL2/external/jpeg-9/makewvcx.v10 b/src/SDL2/external/jpeg-9/makewvcx.v10 new file mode 100644 index 000000000..e6c546af5 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makewvcx.v10 @@ -0,0 +1,62 @@ +‹¯¨ + + + + Release + Win32 + + + + {B57065D4-DDDA-4668-BAF5-2D49270C973C} + Win32Proj + wrjpgcom + + + + Application + false + true + Unicode + + + + + + + + + + false + $(ProjectName)\$(Configuration)\ + $(ProjectName)\$(Configuration)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/jpeg-9/makljpeg.st b/src/SDL2/external/jpeg-9/makljpeg.st new file mode 100644 index 000000000..cc1ba015f --- /dev/null +++ b/src/SDL2/external/jpeg-9/makljpeg.st @@ -0,0 +1,68 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to libjpeg.prj. +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +libjpeg.lib +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost +.L[-J] ; link new Obj-format (so we get a library) += +; * * * * List of modules * * * * +jaricom.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcarith.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jccoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jccolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcdctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jchuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcinit.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcomapi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcparam.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcprepct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jctrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdarith.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdatadst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) +jdatasrc.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) +jdcoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdcolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jddctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jdhuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdinput.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmerge.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdpostct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdtrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jerror.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jversion.h,jerror.h) +jfdctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jfdctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jfdctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jquant1.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jquant2.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jutils.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jmemmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) +jmemansi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) diff --git a/src/SDL2/external/jpeg-9/maktjpeg.st b/src/SDL2/external/jpeg-9/maktjpeg.st new file mode 100644 index 000000000..43f078a95 --- /dev/null +++ b/src/SDL2/external/jpeg-9/maktjpeg.st @@ -0,0 +1,30 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to jpegtran.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +jpegtran.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +jpegtran.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,transupp.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +transupp.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,transupp.h) +libjpeg.lib ; built by libjpeg.prj +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/src/SDL2/external/jpeg-9/makvms.opt b/src/SDL2/external/jpeg-9/makvms.opt new file mode 100644 index 000000000..675e8fe98 --- /dev/null +++ b/src/SDL2/external/jpeg-9/makvms.opt @@ -0,0 +1,4 @@ +! A pointer to the VAX/VMS C Run-Time Shareable Library. +! This file is needed by makefile.mms and makefile.vms, +! but only for the older VAX C compiler. DEC C does not need it. +Sys$Library:VAXCRTL.EXE /Share diff --git a/src/SDL2/external/jpeg-9/missing b/src/SDL2/external/jpeg-9/missing new file mode 100755 index 000000000..cdea51493 --- /dev/null +++ b/src/SDL2/external/jpeg-9/missing @@ -0,0 +1,215 @@ +#! /bin/sh +# Common wrapper for a few potentially missing GNU programs. + +scriptversion=2012-06-26.16; # UTC + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try '$0 --help' for more information" + exit 1 +fi + +case $1 in + + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; + + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + +Supported PROGRAM values: + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man + +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" + exit 1 + ;; + +esac + +# Run the given program, remember its exit status. +"$@"; st=$? + +# If it succeeded, we are done. +test $st -eq 0 && exit 0 + +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi + +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'automa4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/src/SDL2/external/jpeg-9/rdbmp.c b/src/SDL2/external/jpeg-9/rdbmp.c new file mode 100644 index 000000000..fd773d4bb --- /dev/null +++ b/src/SDL2/external/jpeg-9/rdbmp.c @@ -0,0 +1,480 @@ +/* + * rdbmp.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2009-2010 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in Microsoft "BMP" + * format (MS Windows 3.x, OS/2 1.x, and OS/2 2.x flavors). + * Currently, only 8-bit and 24-bit images are supported, not 1-bit or + * 4-bit (feeding such low-depth images into JPEG would be silly anyway). + * Also, we don't support RLE-compressed files. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed BMP format). + * + * This code contributed by James Arthur Boucher. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef BMP_SUPPORTED + + +/* Macros to deal with unsigned chars as efficiently as compiler allows */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char U_CHAR; +#define UCH(x) ((int) (x)) +#else /* !HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char U_CHAR; +#define UCH(x) ((int) (x)) +#else +typedef char U_CHAR; +#define UCH(x) ((int) (x) & 0xFF) +#endif +#endif /* HAVE_UNSIGNED_CHAR */ + + +#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) + + +/* Private version of data source object */ + +typedef struct _bmp_source_struct * bmp_source_ptr; + +typedef struct _bmp_source_struct { + struct cjpeg_source_struct pub; /* public fields */ + + j_compress_ptr cinfo; /* back link saves passing separate parm */ + + JSAMPARRAY colormap; /* BMP colormap (converted to my format) */ + + jvirt_sarray_ptr whole_image; /* Needed to reverse row order */ + JDIMENSION source_row; /* Current source row number */ + JDIMENSION row_width; /* Physical width of scanlines in file */ + + int bits_per_pixel; /* remembers 8- or 24-bit format */ +} bmp_source_struct; + + +LOCAL(int) +read_byte (bmp_source_ptr sinfo) +/* Read next byte from BMP file */ +{ + register FILE *infile = sinfo->pub.input_file; + register int c; + + if ((c = getc(infile)) == EOF) + ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); + return c; +} + + +LOCAL(void) +read_colormap (bmp_source_ptr sinfo, int cmaplen, int mapentrysize) +/* Read the colormap from a BMP file */ +{ + int i; + + switch (mapentrysize) { + case 3: + /* BGR format (occurs in OS/2 files) */ + for (i = 0; i < cmaplen; i++) { + sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); + } + break; + case 4: + /* BGR0 format (occurs in MS Windows files) */ + for (i = 0; i < cmaplen; i++) { + sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); + (void) read_byte(sinfo); + } + break; + default: + ERREXIT(sinfo->cinfo, JERR_BMP_BADCMAP); + break; + } +} + + +/* + * Read one row of pixels. + * The image has been read into the whole_image array, but is otherwise + * unprocessed. We must read it out in top-to-bottom row order, and if + * it is an 8-bit image, we must expand colormapped pixels to 24bit format. + */ + +METHODDEF(JDIMENSION) +get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 8-bit colormap indexes */ +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + register JSAMPARRAY colormap = source->colormap; + JSAMPARRAY image_ptr; + register int t; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + + /* Fetch next row from virtual array */ + source->source_row--; + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, + source->source_row, (JDIMENSION) 1, FALSE); + + /* Expand the colormap indexes to real data */ + inptr = image_ptr[0]; + outptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + t = GETJSAMPLE(*inptr++); + *outptr++ = colormap[0][t]; /* can omit GETJSAMPLE() safely */ + *outptr++ = colormap[1][t]; + *outptr++ = colormap[2][t]; + } + + return 1; +} + + +METHODDEF(JDIMENSION) +get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 24-bit pixels */ +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + JSAMPARRAY image_ptr; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + + /* Fetch next row from virtual array */ + source->source_row--; + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, + source->source_row, (JDIMENSION) 1, FALSE); + + /* Transfer data. Note source values are in BGR order + * (even though Microsoft's own documents say the opposite). + */ + inptr = image_ptr[0]; + outptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ + outptr[1] = *inptr++; + outptr[0] = *inptr++; + outptr += 3; + } + + return 1; +} + + +METHODDEF(JDIMENSION) +get_32bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 32-bit pixels */ +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + JSAMPARRAY image_ptr; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + + /* Fetch next row from virtual array */ + source->source_row--; + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, + source->source_row, (JDIMENSION) 1, FALSE); + /* Transfer data. Note source values are in BGR order + * (even though Microsoft's own documents say the opposite). + */ + inptr = image_ptr[0]; + outptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ + outptr[1] = *inptr++; + outptr[0] = *inptr++; + inptr++; /* skip the 4th byte (Alpha channel) */ + outptr += 3; + } + + return 1; +} + + +/* + * This method loads the image into whole_image during the first call on + * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call + * get_8bit_row, get_24bit_row, or get_32bit_row on subsequent calls. + */ + +METHODDEF(JDIMENSION) +preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + register FILE *infile = source->pub.input_file; + register int c; + register JSAMPROW out_ptr; + JSAMPARRAY image_ptr; + JDIMENSION row, col; + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + + /* Read the data into a virtual array in input-file row order. */ + for (row = 0; row < cinfo->image_height; row++) { + if (progress != NULL) { + progress->pub.pass_counter = (long) row; + progress->pub.pass_limit = (long) cinfo->image_height; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, + row, (JDIMENSION) 1, TRUE); + out_ptr = image_ptr[0]; + for (col = source->row_width; col > 0; col--) { + /* inline copy of read_byte() for speed */ + if ((c = getc(infile)) == EOF) + ERREXIT(cinfo, JERR_INPUT_EOF); + *out_ptr++ = (JSAMPLE) c; + } + } + if (progress != NULL) + progress->completed_extra_passes++; + + /* Set up to read from the virtual array in top-to-bottom order */ + switch (source->bits_per_pixel) { + case 8: + source->pub.get_pixel_rows = get_8bit_row; + break; + case 24: + source->pub.get_pixel_rows = get_24bit_row; + break; + case 32: + source->pub.get_pixel_rows = get_32bit_row; + break; + default: + ERREXIT(cinfo, JERR_BMP_BADDEPTH); + } + source->source_row = cinfo->image_height; + + /* And read the first row */ + return (*source->pub.get_pixel_rows) (cinfo, sinfo); +} + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + U_CHAR bmpfileheader[14]; + U_CHAR bmpinfoheader[64]; +#define GET_2B(array,offset) ((unsigned int) UCH(array[offset]) + \ + (((unsigned int) UCH(array[offset+1])) << 8)) +#define GET_4B(array,offset) ((INT32) UCH(array[offset]) + \ + (((INT32) UCH(array[offset+1])) << 8) + \ + (((INT32) UCH(array[offset+2])) << 16) + \ + (((INT32) UCH(array[offset+3])) << 24)) + INT32 bfOffBits; + INT32 headerSize; + INT32 biWidth; + INT32 biHeight; + unsigned int biPlanes; + INT32 biCompression; + INT32 biXPelsPerMeter,biYPelsPerMeter; + INT32 biClrUsed = 0; + int mapentrysize = 0; /* 0 indicates no colormap */ + INT32 bPad; + JDIMENSION row_width; + + /* Read and verify the bitmap file header */ + if (! ReadOK(source->pub.input_file, bmpfileheader, 14)) + ERREXIT(cinfo, JERR_INPUT_EOF); + if (GET_2B(bmpfileheader,0) != 0x4D42) /* 'BM' */ + ERREXIT(cinfo, JERR_BMP_NOT); + bfOffBits = (INT32) GET_4B(bmpfileheader,10); + /* We ignore the remaining fileheader fields */ + + /* The infoheader might be 12 bytes (OS/2 1.x), 40 bytes (Windows), + * or 64 bytes (OS/2 2.x). Check the first 4 bytes to find out which. + */ + if (! ReadOK(source->pub.input_file, bmpinfoheader, 4)) + ERREXIT(cinfo, JERR_INPUT_EOF); + headerSize = (INT32) GET_4B(bmpinfoheader,0); + if (headerSize < 12 || headerSize > 64) + ERREXIT(cinfo, JERR_BMP_BADHEADER); + if (! ReadOK(source->pub.input_file, bmpinfoheader+4, headerSize-4)) + ERREXIT(cinfo, JERR_INPUT_EOF); + + switch ((int) headerSize) { + case 12: + /* Decode OS/2 1.x header (Microsoft calls this a BITMAPCOREHEADER) */ + biWidth = (INT32) GET_2B(bmpinfoheader,4); + biHeight = (INT32) GET_2B(bmpinfoheader,6); + biPlanes = GET_2B(bmpinfoheader,8); + source->bits_per_pixel = (int) GET_2B(bmpinfoheader,10); + + switch (source->bits_per_pixel) { + case 8: /* colormapped image */ + mapentrysize = 3; /* OS/2 uses RGBTRIPLE colormap */ + TRACEMS2(cinfo, 1, JTRC_BMP_OS2_MAPPED, (int) biWidth, (int) biHeight); + break; + case 24: /* RGB image */ + TRACEMS2(cinfo, 1, JTRC_BMP_OS2, (int) biWidth, (int) biHeight); + break; + default: + ERREXIT(cinfo, JERR_BMP_BADDEPTH); + break; + } + break; + case 40: + case 64: + /* Decode Windows 3.x header (Microsoft calls this a BITMAPINFOHEADER) */ + /* or OS/2 2.x header, which has additional fields that we ignore */ + biWidth = GET_4B(bmpinfoheader,4); + biHeight = GET_4B(bmpinfoheader,8); + biPlanes = GET_2B(bmpinfoheader,12); + source->bits_per_pixel = (int) GET_2B(bmpinfoheader,14); + biCompression = GET_4B(bmpinfoheader,16); + biXPelsPerMeter = GET_4B(bmpinfoheader,24); + biYPelsPerMeter = GET_4B(bmpinfoheader,28); + biClrUsed = GET_4B(bmpinfoheader,32); + /* biSizeImage, biClrImportant fields are ignored */ + + switch (source->bits_per_pixel) { + case 8: /* colormapped image */ + mapentrysize = 4; /* Windows uses RGBQUAD colormap */ + TRACEMS2(cinfo, 1, JTRC_BMP_MAPPED, (int) biWidth, (int) biHeight); + break; + case 24: /* RGB image */ + TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight); + break; + case 32: /* RGB image + Alpha channel */ + TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight); + break; + default: + ERREXIT(cinfo, JERR_BMP_BADDEPTH); + break; + } + if (biCompression != 0) + ERREXIT(cinfo, JERR_BMP_COMPRESSED); + + if (biXPelsPerMeter > 0 && biYPelsPerMeter > 0) { + /* Set JFIF density parameters from the BMP data */ + cinfo->X_density = (UINT16) (biXPelsPerMeter/100); /* 100 cm per meter */ + cinfo->Y_density = (UINT16) (biYPelsPerMeter/100); + cinfo->density_unit = 2; /* dots/cm */ + } + break; + default: + ERREXIT(cinfo, JERR_BMP_BADHEADER); + return; + } + + if (biWidth <= 0 || biHeight <= 0) + ERREXIT(cinfo, JERR_BMP_EMPTY); + if (biPlanes != 1) + ERREXIT(cinfo, JERR_BMP_BADPLANES); + + /* Compute distance to bitmap data --- will adjust for colormap below */ + bPad = bfOffBits - (headerSize + 14); + + /* Read the colormap, if any */ + if (mapentrysize > 0) { + if (biClrUsed <= 0) + biClrUsed = 256; /* assume it's 256 */ + else if (biClrUsed > 256) + ERREXIT(cinfo, JERR_BMP_BADCMAP); + /* Allocate space to store the colormap */ + source->colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) biClrUsed, (JDIMENSION) 3); + /* and read it from the file */ + read_colormap(source, (int) biClrUsed, mapentrysize); + /* account for size of colormap */ + bPad -= biClrUsed * mapentrysize; + } + + /* Skip any remaining pad bytes */ + if (bPad < 0) /* incorrect bfOffBits value? */ + ERREXIT(cinfo, JERR_BMP_BADHEADER); + while (--bPad >= 0) { + (void) read_byte(source); + } + + /* Compute row width in file, including padding to 4-byte boundary */ + if (source->bits_per_pixel == 24) + row_width = (JDIMENSION) (biWidth * 3); + else if (source->bits_per_pixel == 32) + row_width = (JDIMENSION) (biWidth * 4); + else + row_width = (JDIMENSION) biWidth; + while ((row_width & 3) != 0) row_width++; + source->row_width = row_width; + + /* Allocate space for inversion array, prepare for preload pass */ + source->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + row_width, (JDIMENSION) biHeight, (JDIMENSION) 1); + source->pub.get_pixel_rows = preload_image; + if (cinfo->progress != NULL) { + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + progress->total_extra_passes++; /* count file input as separate pass */ + } + + /* Allocate one-row buffer for returned data */ + source->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (biWidth * 3), (JDIMENSION) 1); + source->pub.buffer_height = 1; + + cinfo->in_color_space = JCS_RGB; + cinfo->input_components = 3; + cinfo->data_precision = 8; + cinfo->image_width = (JDIMENSION) biWidth; + cinfo->image_height = (JDIMENSION) biHeight; +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for BMP format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_bmp (j_compress_ptr cinfo) +{ + bmp_source_ptr source; + + /* Create module interface object */ + source = (bmp_source_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(bmp_source_struct)); + source->cinfo = cinfo; /* make back link for subroutines */ + /* Fill in method ptrs, except get_pixel_rows which start_input sets */ + source->pub.start_input = start_input_bmp; + source->pub.finish_input = finish_input_bmp; + + return (cjpeg_source_ptr) source; +} + +#endif /* BMP_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/rdcolmap.c b/src/SDL2/external/jpeg-9/rdcolmap.c new file mode 100644 index 000000000..42b343763 --- /dev/null +++ b/src/SDL2/external/jpeg-9/rdcolmap.c @@ -0,0 +1,253 @@ +/* + * rdcolmap.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file implements djpeg's "-map file" switch. It reads a source image + * and constructs a colormap to be supplied to the JPEG decompressor. + * + * Currently, these file formats are supported for the map file: + * GIF: the contents of the GIF's global colormap are used. + * PPM (either text or raw flavor): the entire file is read and + * each unique pixel value is entered in the map. + * Note that reading a large PPM file will be horrendously slow. + * Typically, a PPM-format map file should contain just one pixel + * of each desired color. Such a file can be extracted from an + * ordinary image PPM file with ppmtomap(1). + * + * Rescaling a PPM that has a maxval unequal to MAXJSAMPLE is not + * currently implemented. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */ + +/* Portions of this code are based on the PBMPLUS library, which is: +** +** Copyright (C) 1988 by Jef Poskanzer. +** +** Permission to use, copy, modify, and distribute this software and its +** documentation for any purpose and without fee is hereby granted, provided +** that the above copyright notice appear in all copies and that both that +** copyright notice and this permission notice appear in supporting +** documentation. This software is provided "as is" without express or +** implied warranty. +*/ + + +/* + * Add a (potentially) new color to the color map. + */ + +LOCAL(void) +add_map_entry (j_decompress_ptr cinfo, int R, int G, int B) +{ + JSAMPROW colormap0 = cinfo->colormap[0]; + JSAMPROW colormap1 = cinfo->colormap[1]; + JSAMPROW colormap2 = cinfo->colormap[2]; + int ncolors = cinfo->actual_number_of_colors; + int index; + + /* Check for duplicate color. */ + for (index = 0; index < ncolors; index++) { + if (GETJSAMPLE(colormap0[index]) == R && + GETJSAMPLE(colormap1[index]) == G && + GETJSAMPLE(colormap2[index]) == B) + return; /* color is already in map */ + } + + /* Check for map overflow. */ + if (ncolors >= (MAXJSAMPLE+1)) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, (MAXJSAMPLE+1)); + + /* OK, add color to map. */ + colormap0[ncolors] = (JSAMPLE) R; + colormap1[ncolors] = (JSAMPLE) G; + colormap2[ncolors] = (JSAMPLE) B; + cinfo->actual_number_of_colors++; +} + + +/* + * Extract color map from a GIF file. + */ + +LOCAL(void) +read_gif_map (j_decompress_ptr cinfo, FILE * infile) +{ + int header[13]; + int i, colormaplen; + int R, G, B; + + /* Initial 'G' has already been read by read_color_map */ + /* Read the rest of the GIF header and logical screen descriptor */ + for (i = 1; i < 13; i++) { + if ((header[i] = getc(infile)) == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + } + + /* Verify GIF Header */ + if (header[1] != 'I' || header[2] != 'F') + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + /* There must be a global color map. */ + if ((header[10] & 0x80) == 0) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + /* OK, fetch it. */ + colormaplen = 2 << (header[10] & 0x07); + + for (i = 0; i < colormaplen; i++) { + R = getc(infile); + G = getc(infile); + B = getc(infile); + if (R == EOF || G == EOF || B == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + add_map_entry(cinfo, + R << (BITS_IN_JSAMPLE-8), + G << (BITS_IN_JSAMPLE-8), + B << (BITS_IN_JSAMPLE-8)); + } +} + + +/* Support routines for reading PPM */ + + +LOCAL(int) +pbm_getc (FILE * infile) +/* Read next char, skipping over any comments */ +/* A comment/newline sequence is returned as a newline */ +{ + register int ch; + + ch = getc(infile); + if (ch == '#') { + do { + ch = getc(infile); + } while (ch != '\n' && ch != EOF); + } + return ch; +} + + +LOCAL(unsigned int) +read_pbm_integer (j_decompress_ptr cinfo, FILE * infile) +/* Read an unsigned decimal integer from the PPM file */ +/* Swallows one trailing character after the integer */ +/* Note that on a 16-bit-int machine, only values up to 64k can be read. */ +/* This should not be a problem in practice. */ +{ + register int ch; + register unsigned int val; + + /* Skip any leading whitespace */ + do { + ch = pbm_getc(infile); + if (ch == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r'); + + if (ch < '0' || ch > '9') + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + val = ch - '0'; + while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') { + val *= 10; + val += ch - '0'; + } + return val; +} + + +/* + * Extract color map from a PPM file. + */ + +LOCAL(void) +read_ppm_map (j_decompress_ptr cinfo, FILE * infile) +{ + int c; + unsigned int w, h, maxval, row, col; + int R, G, B; + + /* Initial 'P' has already been read by read_color_map */ + c = getc(infile); /* save format discriminator for a sec */ + + /* while we fetch the remaining header info */ + w = read_pbm_integer(cinfo, infile); + h = read_pbm_integer(cinfo, infile); + maxval = read_pbm_integer(cinfo, infile); + + if (w <= 0 || h <= 0 || maxval <= 0) /* error check */ + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + /* For now, we don't support rescaling from an unusual maxval. */ + if (maxval != (unsigned int) MAXJSAMPLE) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + switch (c) { + case '3': /* it's a text-format PPM file */ + for (row = 0; row < h; row++) { + for (col = 0; col < w; col++) { + R = read_pbm_integer(cinfo, infile); + G = read_pbm_integer(cinfo, infile); + B = read_pbm_integer(cinfo, infile); + add_map_entry(cinfo, R, G, B); + } + } + break; + + case '6': /* it's a raw-format PPM file */ + for (row = 0; row < h; row++) { + for (col = 0; col < w; col++) { + R = getc(infile); + G = getc(infile); + B = getc(infile); + if (R == EOF || G == EOF || B == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + add_map_entry(cinfo, R, G, B); + } + } + break; + + default: + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + break; + } +} + + +/* + * Main entry point from djpeg.c. + * Input: opened input file (from file name argument on command line). + * Output: colormap and actual_number_of_colors fields are set in cinfo. + */ + +GLOBAL(void) +read_color_map (j_decompress_ptr cinfo, FILE * infile) +{ + /* Allocate space for a color map of maximum supported size. */ + cinfo->colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (MAXJSAMPLE+1), (JDIMENSION) 3); + cinfo->actual_number_of_colors = 0; /* initialize map to empty */ + + /* Read first byte to determine file format */ + switch (getc(infile)) { + case 'G': + read_gif_map(cinfo, infile); + break; + case 'P': + read_ppm_map(cinfo, infile); + break; + default: + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + break; + } +} + +#endif /* QUANT_2PASS_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/rdgif.c b/src/SDL2/external/jpeg-9/rdgif.c new file mode 100644 index 000000000..b27c1675d --- /dev/null +++ b/src/SDL2/external/jpeg-9/rdgif.c @@ -0,0 +1,38 @@ +/* + * rdgif.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in GIF format. + * + ***************************************************************************** + * NOTE: to avoid entanglements with Unisys' patent on LZW compression, * + * the ability to read GIF files has been removed from the IJG distribution. * + * Sorry about that. * + ***************************************************************************** + * + * We are required to state that + * "The Graphics Interchange Format(c) is the Copyright property of + * CompuServe Incorporated. GIF(sm) is a Service Mark property of + * CompuServe Incorporated." + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef GIF_SUPPORTED + +/* + * The module selection routine for GIF format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_gif (j_compress_ptr cinfo) +{ + fprintf(stderr, "GIF input is unsupported for legal reasons. Sorry.\n"); + exit(EXIT_FAILURE); + return NULL; /* keep compiler happy */ +} + +#endif /* GIF_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/rdjpgcom.1 b/src/SDL2/external/jpeg-9/rdjpgcom.1 new file mode 100644 index 000000000..97611df81 --- /dev/null +++ b/src/SDL2/external/jpeg-9/rdjpgcom.1 @@ -0,0 +1,63 @@ +.TH RDJPGCOM 1 "02 April 2009" +.SH NAME +rdjpgcom \- display text comments from a JPEG file +.SH SYNOPSIS +.B rdjpgcom +[ +.B \-raw +] +[ +.B \-verbose +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B rdjpgcom +reads the named JPEG/JFIF file, or the standard input if no file is named, +and prints any text comments found in the file on the standard output. +.PP +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. +.SH OPTIONS +.TP +.B \-raw +Normally +.B rdjpgcom +escapes non-printable characters in comments, for security reasons. +This option avoids that. +.PP +.B \-verbose +Causes +.B rdjpgcom +to also display the JPEG image dimensions. +.PP +Switch names may be abbreviated, and are not case sensitive. +.SH HINTS +.B rdjpgcom +does not depend on the IJG JPEG library. Its source code is intended as an +illustration of the minimum amount of code required to parse a JPEG file +header correctly. +.PP +In +.B \-verbose +mode, +.B rdjpgcom +will also attempt to print the contents of any "APP12" markers as text. +Some digital cameras produce APP12 markers containing useful textual +information. If you like, you can modify the source code to print +other APPn marker types as well. +.SH SEE ALSO +.BR cjpeg (1), +.BR djpeg (1), +.BR jpegtran (1), +.BR wrjpgcom (1) +.SH AUTHOR +Independent JPEG Group diff --git a/src/SDL2/external/jpeg-9/rdjpgcom.c b/src/SDL2/external/jpeg-9/rdjpgcom.c new file mode 100644 index 000000000..371915474 --- /dev/null +++ b/src/SDL2/external/jpeg-9/rdjpgcom.c @@ -0,0 +1,515 @@ +/* + * rdjpgcom.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2009 by Bill Allombert, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a very simple stand-alone application that displays + * the text in COM (comment) markers in a JFIF file. + * This may be useful as an example of the minimum logic needed to parse + * JPEG markers. + */ + +#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ +#include "jinclude.h" /* get auto-config symbols, */ + +#ifdef HAVE_LOCALE_H +#include /* Bill Allombert: use locale for isprint */ +#endif +#include /* to declare isupper(), tolower() */ +#ifdef USE_SETMODE +#include /* to declare setmode()'s parameter macros */ +/* If you have setmode() but not , just delete this line: */ +#include /* to declare setmode() */ +#endif + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif + + +/* + * These macros are used to read the input file. + * To reuse this code in another application, you might need to change these. + */ + +static FILE * infile; /* input JPEG file */ + +/* Return next input byte, or EOF if no more */ +#define NEXTBYTE() getc(infile) + + +/* Error exit handler */ +#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE)) + + +/* Read one byte, testing for EOF */ +static int +read_1_byte (void) +{ + int c; + + c = NEXTBYTE(); + if (c == EOF) + ERREXIT("Premature EOF in JPEG file"); + return c; +} + +/* Read 2 bytes, convert to unsigned int */ +/* All 2-byte quantities in JPEG markers are MSB first */ +static unsigned int +read_2_bytes (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + if (c1 == EOF) + ERREXIT("Premature EOF in JPEG file"); + c2 = NEXTBYTE(); + if (c2 == EOF) + ERREXIT("Premature EOF in JPEG file"); + return (((unsigned int) c1) << 8) + ((unsigned int) c2); +} + + +/* + * JPEG markers consist of one or more 0xFF bytes, followed by a marker + * code byte (which is not an FF). Here are the marker codes of interest + * in this program. (See jdmarker.c for a more complete list.) + */ + +#define M_SOF0 0xC0 /* Start Of Frame N */ +#define M_SOF1 0xC1 /* N indicates which compression process */ +#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */ +#define M_SOF3 0xC3 +#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */ +#define M_SOF6 0xC6 +#define M_SOF7 0xC7 +#define M_SOF9 0xC9 +#define M_SOF10 0xCA +#define M_SOF11 0xCB +#define M_SOF13 0xCD +#define M_SOF14 0xCE +#define M_SOF15 0xCF +#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */ +#define M_EOI 0xD9 /* End Of Image (end of datastream) */ +#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */ +#define M_APP0 0xE0 /* Application-specific marker, type N */ +#define M_APP12 0xEC /* (we don't bother to list all 16 APPn's) */ +#define M_COM 0xFE /* COMment */ + + +/* + * Find the next JPEG marker and return its marker code. + * We expect at least one FF byte, possibly more if the compressor used FFs + * to pad the file. + * There could also be non-FF garbage between markers. The treatment of such + * garbage is unspecified; we choose to skip over it but emit a warning msg. + * NB: this routine must not be used after seeing SOS marker, since it will + * not deal correctly with FF/00 sequences in the compressed image data... + */ + +static int +next_marker (void) +{ + int c; + int discarded_bytes = 0; + + /* Find 0xFF byte; count and skip any non-FFs. */ + c = read_1_byte(); + while (c != 0xFF) { + discarded_bytes++; + c = read_1_byte(); + } + /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs + * are legal as pad bytes, so don't count them in discarded_bytes. + */ + do { + c = read_1_byte(); + } while (c == 0xFF); + + if (discarded_bytes != 0) { + fprintf(stderr, "Warning: garbage data found in JPEG file\n"); + } + + return c; +} + + +/* + * Read the initial marker, which should be SOI. + * For a JFIF file, the first two bytes of the file should be literally + * 0xFF M_SOI. To be more general, we could use next_marker, but if the + * input file weren't actually JPEG at all, next_marker might read the whole + * file and then return a misleading error message... + */ + +static int +first_marker (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + c2 = NEXTBYTE(); + if (c1 != 0xFF || c2 != M_SOI) + ERREXIT("Not a JPEG file"); + return c2; +} + + +/* + * Most types of marker are followed by a variable-length parameter segment. + * This routine skips over the parameters for any marker we don't otherwise + * want to process. + * Note that we MUST skip the parameter segment explicitly in order not to + * be fooled by 0xFF bytes that might appear within the parameter segment; + * such bytes do NOT introduce new markers. + */ + +static void +skip_variable (void) +/* Skip over an unknown or uninteresting variable-length marker */ +{ + unsigned int length; + + /* Get the marker parameter length count */ + length = read_2_bytes(); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + /* Skip over the remaining bytes */ + while (length > 0) { + (void) read_1_byte(); + length--; + } +} + + +/* + * Process a COM marker. + * We want to print out the marker contents as legible text; + * we must guard against non-text junk and varying newline representations. + */ + +static void +process_COM (int raw) +{ + unsigned int length; + int ch; + int lastch = 0; + + /* Bill Allombert: set locale properly for isprint */ +#ifdef HAVE_LOCALE_H + setlocale(LC_CTYPE, ""); +#endif + + /* Get the marker parameter length count */ + length = read_2_bytes(); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + + while (length > 0) { + ch = read_1_byte(); + if (raw) { + putc(ch, stdout); + /* Emit the character in a readable form. + * Nonprintables are converted to \nnn form, + * while \ is converted to \\. + * Newlines in CR, CR/LF, or LF form will be printed as one newline. + */ + } else if (ch == '\r') { + printf("\n"); + } else if (ch == '\n') { + if (lastch != '\r') + printf("\n"); + } else if (ch == '\\') { + printf("\\\\"); + } else if (isprint(ch)) { + putc(ch, stdout); + } else { + printf("\\%03o", ch); + } + lastch = ch; + length--; + } + printf("\n"); + + /* Bill Allombert: revert to C locale */ +#ifdef HAVE_LOCALE_H + setlocale(LC_CTYPE, "C"); +#endif +} + + +/* + * Process a SOFn marker. + * This code is only needed if you want to know the image dimensions... + */ + +static void +process_SOFn (int marker) +{ + unsigned int length; + unsigned int image_height, image_width; + int data_precision, num_components; + const char * process; + int ci; + + length = read_2_bytes(); /* usual parameter length count */ + + data_precision = read_1_byte(); + image_height = read_2_bytes(); + image_width = read_2_bytes(); + num_components = read_1_byte(); + + switch (marker) { + case M_SOF0: process = "Baseline"; break; + case M_SOF1: process = "Extended sequential"; break; + case M_SOF2: process = "Progressive"; break; + case M_SOF3: process = "Lossless"; break; + case M_SOF5: process = "Differential sequential"; break; + case M_SOF6: process = "Differential progressive"; break; + case M_SOF7: process = "Differential lossless"; break; + case M_SOF9: process = "Extended sequential, arithmetic coding"; break; + case M_SOF10: process = "Progressive, arithmetic coding"; break; + case M_SOF11: process = "Lossless, arithmetic coding"; break; + case M_SOF13: process = "Differential sequential, arithmetic coding"; break; + case M_SOF14: process = "Differential progressive, arithmetic coding"; break; + case M_SOF15: process = "Differential lossless, arithmetic coding"; break; + default: process = "Unknown"; break; + } + + printf("JPEG image is %uw * %uh, %d color components, %d bits per sample\n", + image_width, image_height, num_components, data_precision); + printf("JPEG process: %s\n", process); + + if (length != (unsigned int) (8 + num_components * 3)) + ERREXIT("Bogus SOF marker length"); + + for (ci = 0; ci < num_components; ci++) { + (void) read_1_byte(); /* Component ID code */ + (void) read_1_byte(); /* H, V sampling factors */ + (void) read_1_byte(); /* Quantization table number */ + } +} + + +/* + * Parse the marker stream until SOS or EOI is seen; + * display any COM markers. + * While the companion program wrjpgcom will always insert COM markers before + * SOFn, other implementations might not, so we scan to SOS before stopping. + * If we were only interested in the image dimensions, we would stop at SOFn. + * (Conversely, if we only cared about COM markers, there would be no need + * for special code to handle SOFn; we could treat it like other markers.) + */ + +static int +scan_JPEG_header (int verbose, int raw) +{ + int marker; + + /* Expect SOI at start of file */ + if (first_marker() != M_SOI) + ERREXIT("Expected SOI marker first"); + + /* Scan miscellaneous markers until we reach SOS. */ + for (;;) { + marker = next_marker(); + switch (marker) { + /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be, + * treated as SOFn. C4 in particular is actually DHT. + */ + case M_SOF0: /* Baseline */ + case M_SOF1: /* Extended sequential, Huffman */ + case M_SOF2: /* Progressive, Huffman */ + case M_SOF3: /* Lossless, Huffman */ + case M_SOF5: /* Differential sequential, Huffman */ + case M_SOF6: /* Differential progressive, Huffman */ + case M_SOF7: /* Differential lossless, Huffman */ + case M_SOF9: /* Extended sequential, arithmetic */ + case M_SOF10: /* Progressive, arithmetic */ + case M_SOF11: /* Lossless, arithmetic */ + case M_SOF13: /* Differential sequential, arithmetic */ + case M_SOF14: /* Differential progressive, arithmetic */ + case M_SOF15: /* Differential lossless, arithmetic */ + if (verbose) + process_SOFn(marker); + else + skip_variable(); + break; + + case M_SOS: /* stop before hitting compressed data */ + return marker; + + case M_EOI: /* in case it's a tables-only JPEG stream */ + return marker; + + case M_COM: + process_COM(raw); + break; + + case M_APP12: + /* Some digital camera makers put useful textual information into + * APP12 markers, so we print those out too when in -verbose mode. + */ + if (verbose) { + printf("APP12 contains:\n"); + process_COM(raw); + } else + skip_variable(); + break; + + default: /* Anything else just gets skipped */ + skip_variable(); /* we assume it has a parameter count... */ + break; + } + } /* end loop */ +} + + +/* Command line parsing code */ + +static const char * progname; /* program name for error messages */ + + +static void +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "rdjpgcom displays any textual comments in a JPEG file.\n"); + + fprintf(stderr, "Usage: %s [switches] [inputfile]\n", progname); + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -raw Display non-printable characters in comments (unsafe)\n"); + fprintf(stderr, " -verbose Also display dimensions of JPEG image\n"); + + exit(EXIT_FAILURE); +} + + +static int +keymatch (char * arg, const char * keyword, int minchars) +/* Case-insensitive matching of (possibly abbreviated) keyword switches. */ +/* keyword is the constant keyword (must be lower case already), */ +/* minchars is length of minimum legal abbreviation. */ +{ + register int ca, ck; + register int nmatched = 0; + + while ((ca = *arg++) != '\0') { + if ((ck = *keyword++) == '\0') + return 0; /* arg longer than keyword, no good */ + if (isupper(ca)) /* force arg to lcase (assume ck is already) */ + ca = tolower(ca); + if (ca != ck) + return 0; /* no good */ + nmatched++; /* count matched characters */ + } + /* reached end of argument; fail if it's too short for unique abbrev */ + if (nmatched < minchars) + return 0; + return 1; /* A-OK */ +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + int argn; + char * arg; + int verbose = 0, raw = 0; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "rdjpgcom"; /* in case C library doesn't provide it */ + + /* Parse switches, if any */ + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (arg[0] != '-') + break; /* not switch, must be file name */ + arg++; /* advance over '-' */ + if (keymatch(arg, "verbose", 1)) { + verbose++; + } else if (keymatch(arg, "raw", 1)) { + raw = 1; + } else + usage(); + } + + /* Open the input file. */ + /* Unix style: expect zero or one file name */ + if (argn < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } + if (argn < argc) { + if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdin), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open stdin\n", progname); + exit(EXIT_FAILURE); + } +#else + infile = stdin; +#endif + } + + /* Scan the JPEG headers. */ + (void) scan_JPEG_header(verbose, raw); + + /* All done. */ + exit(EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/src/SDL2/external/jpeg-9/rdppm.c b/src/SDL2/external/jpeg-9/rdppm.c new file mode 100644 index 000000000..a7570227c --- /dev/null +++ b/src/SDL2/external/jpeg-9/rdppm.c @@ -0,0 +1,459 @@ +/* + * rdppm.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2009 by Bill Allombert, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in PPM/PGM format. + * The extended 2-byte-per-sample raw PPM/PGM formats are supported. + * The PBMPLUS library is NOT required to compile this software + * (but it is highly useful as a set of PPM image manipulation programs). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed PPM format). + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef PPM_SUPPORTED + + +/* Portions of this code are based on the PBMPLUS library, which is: +** +** Copyright (C) 1988 by Jef Poskanzer. +** +** Permission to use, copy, modify, and distribute this software and its +** documentation for any purpose and without fee is hereby granted, provided +** that the above copyright notice appear in all copies and that both that +** copyright notice and this permission notice appear in supporting +** documentation. This software is provided "as is" without express or +** implied warranty. +*/ + + +/* Macros to deal with unsigned chars as efficiently as compiler allows */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char U_CHAR; +#define UCH(x) ((int) (x)) +#else /* !HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char U_CHAR; +#define UCH(x) ((int) (x)) +#else +typedef char U_CHAR; +#define UCH(x) ((int) (x) & 0xFF) +#endif +#endif /* HAVE_UNSIGNED_CHAR */ + + +#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) + + +/* + * On most systems, reading individual bytes with getc() is drastically less + * efficient than buffering a row at a time with fread(). On PCs, we must + * allocate the buffer in near data space, because we are assuming small-data + * memory model, wherein fread() can't reach far memory. If you need to + * process very wide images on a PC, you might have to compile in large-memory + * model, or else replace fread() with a getc() loop --- which will be much + * slower. + */ + + +/* Private version of data source object */ + +typedef struct { + struct cjpeg_source_struct pub; /* public fields */ + + U_CHAR *iobuffer; /* non-FAR pointer to I/O buffer */ + JSAMPROW pixrow; /* FAR pointer to same */ + size_t buffer_width; /* width of I/O buffer */ + JSAMPLE *rescale; /* => maxval-remapping array, or NULL */ +} ppm_source_struct; + +typedef ppm_source_struct * ppm_source_ptr; + + +LOCAL(int) +pbm_getc (FILE * infile) +/* Read next char, skipping over any comments */ +/* A comment/newline sequence is returned as a newline */ +{ + register int ch; + + ch = getc(infile); + if (ch == '#') { + do { + ch = getc(infile); + } while (ch != '\n' && ch != EOF); + } + return ch; +} + + +LOCAL(unsigned int) +read_pbm_integer (j_compress_ptr cinfo, FILE * infile) +/* Read an unsigned decimal integer from the PPM file */ +/* Swallows one trailing character after the integer */ +/* Note that on a 16-bit-int machine, only values up to 64k can be read. */ +/* This should not be a problem in practice. */ +{ + register int ch; + register unsigned int val; + + /* Skip any leading whitespace */ + do { + ch = pbm_getc(infile); + if (ch == EOF) + ERREXIT(cinfo, JERR_INPUT_EOF); + } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r'); + + if (ch < '0' || ch > '9') + ERREXIT(cinfo, JERR_PPM_NONNUMERIC); + + val = ch - '0'; + while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') { + val *= 10; + val += ch - '0'; + } + return val; +} + + +/* + * Read one row of pixels. + * + * We provide several different versions depending on input file format. + * In all cases, input is scaled to the size of JSAMPLE. + * + * A really fast path is provided for reading byte/sample raw files with + * maxval = MAXJSAMPLE, which is the normal case for 8-bit data. + */ + + +METHODDEF(JDIMENSION) +get_text_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading text-format PGM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + FILE * infile = source->pub.input_file; + register JSAMPROW ptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_text_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading text-format PPM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + FILE * infile = source->pub.input_file; + register JSAMPROW ptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; + *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; + *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_scaled_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-byte-format PGM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + *ptr++ = rescale[UCH(*bufferptr++)]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_scaled_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-byte-format PPM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + *ptr++ = rescale[UCH(*bufferptr++)]; + *ptr++ = rescale[UCH(*bufferptr++)]; + *ptr++ = rescale[UCH(*bufferptr++)]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_raw_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-byte-format files with maxval = MAXJSAMPLE. + * In this case we just read right into the JSAMPLE buffer! + * Note that same code works for PPM and PGM files. + */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + return 1; +} + + +METHODDEF(JDIMENSION) +get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-word-format PGM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + register int temp; + temp = UCH(*bufferptr++) << 8; + temp |= UCH(*bufferptr++); + *ptr++ = rescale[temp]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-word-format PPM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + register int temp; + temp = UCH(*bufferptr++) << 8; + temp |= UCH(*bufferptr++); + *ptr++ = rescale[temp]; + temp = UCH(*bufferptr++) << 8; + temp |= UCH(*bufferptr++); + *ptr++ = rescale[temp]; + temp = UCH(*bufferptr++) << 8; + temp |= UCH(*bufferptr++); + *ptr++ = rescale[temp]; + } + return 1; +} + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + int c; + unsigned int w, h, maxval; + boolean need_iobuffer, use_raw_buffer, need_rescale; + + if (getc(source->pub.input_file) != 'P') + ERREXIT(cinfo, JERR_PPM_NOT); + + c = getc(source->pub.input_file); /* subformat discriminator character */ + + /* detect unsupported variants (ie, PBM) before trying to read header */ + switch (c) { + case '2': /* it's a text-format PGM file */ + case '3': /* it's a text-format PPM file */ + case '5': /* it's a raw-format PGM file */ + case '6': /* it's a raw-format PPM file */ + break; + default: + ERREXIT(cinfo, JERR_PPM_NOT); + break; + } + + /* fetch the remaining header info */ + w = read_pbm_integer(cinfo, source->pub.input_file); + h = read_pbm_integer(cinfo, source->pub.input_file); + maxval = read_pbm_integer(cinfo, source->pub.input_file); + + if (w <= 0 || h <= 0 || maxval <= 0) /* error check */ + ERREXIT(cinfo, JERR_PPM_NOT); + + cinfo->data_precision = BITS_IN_JSAMPLE; /* we always rescale data to this */ + cinfo->image_width = (JDIMENSION) w; + cinfo->image_height = (JDIMENSION) h; + + /* initialize flags to most common settings */ + need_iobuffer = TRUE; /* do we need an I/O buffer? */ + use_raw_buffer = FALSE; /* do we map input buffer onto I/O buffer? */ + need_rescale = TRUE; /* do we need a rescale array? */ + + switch (c) { + case '2': /* it's a text-format PGM file */ + cinfo->input_components = 1; + cinfo->in_color_space = JCS_GRAYSCALE; + TRACEMS2(cinfo, 1, JTRC_PGM_TEXT, w, h); + source->pub.get_pixel_rows = get_text_gray_row; + need_iobuffer = FALSE; + break; + + case '3': /* it's a text-format PPM file */ + cinfo->input_components = 3; + cinfo->in_color_space = JCS_RGB; + TRACEMS2(cinfo, 1, JTRC_PPM_TEXT, w, h); + source->pub.get_pixel_rows = get_text_rgb_row; + need_iobuffer = FALSE; + break; + + case '5': /* it's a raw-format PGM file */ + cinfo->input_components = 1; + cinfo->in_color_space = JCS_GRAYSCALE; + TRACEMS2(cinfo, 1, JTRC_PGM, w, h); + if (maxval > 255) { + source->pub.get_pixel_rows = get_word_gray_row; + } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) { + source->pub.get_pixel_rows = get_raw_row; + use_raw_buffer = TRUE; + need_rescale = FALSE; + } else { + source->pub.get_pixel_rows = get_scaled_gray_row; + } + break; + + case '6': /* it's a raw-format PPM file */ + cinfo->input_components = 3; + cinfo->in_color_space = JCS_RGB; + TRACEMS2(cinfo, 1, JTRC_PPM, w, h); + if (maxval > 255) { + source->pub.get_pixel_rows = get_word_rgb_row; + } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) { + source->pub.get_pixel_rows = get_raw_row; + use_raw_buffer = TRUE; + need_rescale = FALSE; + } else { + source->pub.get_pixel_rows = get_scaled_rgb_row; + } + break; + } + + /* Allocate space for I/O buffer: 1 or 3 bytes or words/pixel. */ + if (need_iobuffer) { + source->buffer_width = (size_t) w * cinfo->input_components * + ((maxval<=255) ? SIZEOF(U_CHAR) : (2*SIZEOF(U_CHAR))); + source->iobuffer = (U_CHAR *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + source->buffer_width); + } + + /* Create compressor input buffer. */ + if (use_raw_buffer) { + /* For unscaled raw-input case, we can just map it onto the I/O buffer. */ + /* Synthesize a JSAMPARRAY pointer structure */ + /* Cast here implies near->far pointer conversion on PCs */ + source->pixrow = (JSAMPROW) source->iobuffer; + source->pub.buffer = & source->pixrow; + source->pub.buffer_height = 1; + } else { + /* Need to translate anyway, so make a separate sample buffer. */ + source->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) w * cinfo->input_components, (JDIMENSION) 1); + source->pub.buffer_height = 1; + } + + /* Compute the rescaling array if required. */ + if (need_rescale) { + INT32 val, half_maxval; + + /* On 16-bit-int machines we have to be careful of maxval = 65535 */ + source->rescale = (JSAMPLE *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) (((long) maxval + 1L) * SIZEOF(JSAMPLE))); + half_maxval = maxval / 2; + for (val = 0; val <= (INT32) maxval; val++) { + /* The multiplication here must be done in 32 bits to avoid overflow */ + source->rescale[val] = (JSAMPLE) ((val*MAXJSAMPLE + half_maxval)/maxval); + } + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for PPM format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_ppm (j_compress_ptr cinfo) +{ + ppm_source_ptr source; + + /* Create module interface object */ + source = (ppm_source_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(ppm_source_struct)); + /* Fill in method ptrs, except get_pixel_rows which start_input sets */ + source->pub.start_input = start_input_ppm; + source->pub.finish_input = finish_input_ppm; + + return (cjpeg_source_ptr) source; +} + +#endif /* PPM_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/rdrle.c b/src/SDL2/external/jpeg-9/rdrle.c new file mode 100644 index 000000000..542bc3749 --- /dev/null +++ b/src/SDL2/external/jpeg-9/rdrle.c @@ -0,0 +1,387 @@ +/* + * rdrle.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in Utah RLE format. + * The Utah Raster Toolkit library is required (version 3.1 or later). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed RLE format). + * + * Based on code contributed by Mike Lijewski, + * with updates from Robert Hutchinson. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef RLE_SUPPORTED + +/* rle.h is provided by the Utah Raster Toolkit. */ + +#include + +/* + * We assume that JSAMPLE has the same representation as rle_pixel, + * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + +/* + * We support the following types of RLE files: + * + * GRAYSCALE - 8 bits, no colormap + * MAPPEDGRAY - 8 bits, 1 channel colomap + * PSEUDOCOLOR - 8 bits, 3 channel colormap + * TRUECOLOR - 24 bits, 3 channel colormap + * DIRECTCOLOR - 24 bits, no colormap + * + * For now, we ignore any alpha channel in the image. + */ + +typedef enum + { GRAYSCALE, MAPPEDGRAY, PSEUDOCOLOR, TRUECOLOR, DIRECTCOLOR } rle_kind; + + +/* + * Since RLE stores scanlines bottom-to-top, we have to invert the image + * to conform to JPEG's top-to-bottom order. To do this, we read the + * incoming image into a virtual array on the first get_pixel_rows call, + * then fetch the required row from the virtual array on subsequent calls. + */ + +typedef struct _rle_source_struct * rle_source_ptr; + +typedef struct _rle_source_struct { + struct cjpeg_source_struct pub; /* public fields */ + + rle_kind visual; /* actual type of input file */ + jvirt_sarray_ptr image; /* virtual array to hold the image */ + JDIMENSION row; /* current row # in the virtual array */ + rle_hdr header; /* Input file information */ + rle_pixel** rle_row; /* holds a row returned by rle_getrow() */ + +} rle_source_struct; + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + JDIMENSION width, height; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + /* Use RLE library routine to get the header info */ + source->header = *rle_hdr_init(NULL); + source->header.rle_file = source->pub.input_file; + switch (rle_get_setup(&(source->header))) { + case RLE_SUCCESS: + /* A-OK */ + break; + case RLE_NOT_RLE: + ERREXIT(cinfo, JERR_RLE_NOT); + break; + case RLE_NO_SPACE: + ERREXIT(cinfo, JERR_RLE_MEM); + break; + case RLE_EMPTY: + ERREXIT(cinfo, JERR_RLE_EMPTY); + break; + case RLE_EOF: + ERREXIT(cinfo, JERR_RLE_EOF); + break; + default: + ERREXIT(cinfo, JERR_RLE_BADERROR); + break; + } + + /* Figure out what we have, set private vars and return values accordingly */ + + width = source->header.xmax - source->header.xmin + 1; + height = source->header.ymax - source->header.ymin + 1; + source->header.xmin = 0; /* realign horizontally */ + source->header.xmax = width-1; + + cinfo->image_width = width; + cinfo->image_height = height; + cinfo->data_precision = 8; /* we can only handle 8 bit data */ + + if (source->header.ncolors == 1 && source->header.ncmap == 0) { + source->visual = GRAYSCALE; + TRACEMS2(cinfo, 1, JTRC_RLE_GRAY, width, height); + } else if (source->header.ncolors == 1 && source->header.ncmap == 1) { + source->visual = MAPPEDGRAY; + TRACEMS3(cinfo, 1, JTRC_RLE_MAPGRAY, width, height, + 1 << source->header.cmaplen); + } else if (source->header.ncolors == 1 && source->header.ncmap == 3) { + source->visual = PSEUDOCOLOR; + TRACEMS3(cinfo, 1, JTRC_RLE_MAPPED, width, height, + 1 << source->header.cmaplen); + } else if (source->header.ncolors == 3 && source->header.ncmap == 3) { + source->visual = TRUECOLOR; + TRACEMS3(cinfo, 1, JTRC_RLE_FULLMAP, width, height, + 1 << source->header.cmaplen); + } else if (source->header.ncolors == 3 && source->header.ncmap == 0) { + source->visual = DIRECTCOLOR; + TRACEMS2(cinfo, 1, JTRC_RLE, width, height); + } else + ERREXIT(cinfo, JERR_RLE_UNSUPPORTED); + + if (source->visual == GRAYSCALE || source->visual == MAPPEDGRAY) { + cinfo->in_color_space = JCS_GRAYSCALE; + cinfo->input_components = 1; + } else { + cinfo->in_color_space = JCS_RGB; + cinfo->input_components = 3; + } + + /* + * A place to hold each scanline while it's converted. + * (GRAYSCALE scanlines don't need converting) + */ + if (source->visual != GRAYSCALE) { + source->rle_row = (rle_pixel**) (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) width, (JDIMENSION) cinfo->input_components); + } + + /* request a virtual array to hold the image */ + source->image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) (width * source->header.ncolors), + (JDIMENSION) height, (JDIMENSION) 1); + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + /* count file input as separate pass */ + progress->total_extra_passes++; + } +#endif + + source->pub.buffer_height = 1; +} + + +/* + * Read one row of pixels. + * Called only after load_image has read the image into the virtual array. + * Used for GRAYSCALE, MAPPEDGRAY, TRUECOLOR, and DIRECTCOLOR images. + */ + +METHODDEF(JDIMENSION) +get_rle_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + + source->row--; + source->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE); + + return 1; +} + +/* + * Read one row of pixels. + * Called only after load_image has read the image into the virtual array. + * Used for PSEUDOCOLOR images. + */ + +METHODDEF(JDIMENSION) +get_pseudocolor_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + JSAMPROW src_row, dest_row; + JDIMENSION col; + rle_map *colormap; + int val; + + colormap = source->header.cmap; + dest_row = source->pub.buffer[0]; + source->row--; + src_row = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE); + + for (col = cinfo->image_width; col > 0; col--) { + val = GETJSAMPLE(*src_row++); + *dest_row++ = (JSAMPLE) (colormap[val ] >> 8); + *dest_row++ = (JSAMPLE) (colormap[val + 256] >> 8); + *dest_row++ = (JSAMPLE) (colormap[val + 512] >> 8); + } + + return 1; +} + + +/* + * Load the image into a virtual array. We have to do this because RLE + * files start at the lower left while the JPEG standard has them starting + * in the upper left. This is called the first time we want to get a row + * of input. What we do is load the RLE data into the array and then call + * the appropriate routine to read one row from the array. Before returning, + * we set source->pub.get_pixel_rows so that subsequent calls go straight to + * the appropriate row-reading routine. + */ + +METHODDEF(JDIMENSION) +load_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + JDIMENSION row, col; + JSAMPROW scanline, red_ptr, green_ptr, blue_ptr; + rle_pixel **rle_row; + rle_map *colormap; + char channel; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + colormap = source->header.cmap; + rle_row = source->rle_row; + + /* Read the RLE data into our virtual array. + * We assume here that (a) rle_pixel is represented the same as JSAMPLE, + * and (b) we are not on a machine where FAR pointers differ from regular. + */ + RLE_CLR_BIT(source->header, RLE_ALPHA); /* don't read the alpha channel */ + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_limit = cinfo->image_height; + progress->pub.pass_counter = 0; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + + switch (source->visual) { + + case GRAYSCALE: + case PSEUDOCOLOR: + for (row = 0; row < cinfo->image_height; row++) { + rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); + rle_getrow(&source->header, rle_row); +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + break; + + case MAPPEDGRAY: + case TRUECOLOR: + for (row = 0; row < cinfo->image_height; row++) { + scanline = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); + rle_row = source->rle_row; + rle_getrow(&source->header, rle_row); + + for (col = 0; col < cinfo->image_width; col++) { + for (channel = 0; channel < source->header.ncolors; channel++) { + *scanline++ = (JSAMPLE) + (colormap[GETJSAMPLE(rle_row[channel][col]) + 256 * channel] >> 8); + } + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + break; + + case DIRECTCOLOR: + for (row = 0; row < cinfo->image_height; row++) { + scanline = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); + rle_getrow(&source->header, rle_row); + + red_ptr = rle_row[0]; + green_ptr = rle_row[1]; + blue_ptr = rle_row[2]; + + for (col = cinfo->image_width; col > 0; col--) { + *scanline++ = *red_ptr++; + *scanline++ = *green_ptr++; + *scanline++ = *blue_ptr++; + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) + progress->completed_extra_passes++; +#endif + + /* Set up to call proper row-extraction routine in future */ + if (source->visual == PSEUDOCOLOR) { + source->pub.buffer = source->rle_row; + source->pub.get_pixel_rows = get_pseudocolor_row; + } else { + source->pub.get_pixel_rows = get_rle_row; + } + source->row = cinfo->image_height; + + /* And fetch the topmost (bottommost) row */ + return (*source->pub.get_pixel_rows) (cinfo, sinfo); +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for RLE format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_rle (j_compress_ptr cinfo) +{ + rle_source_ptr source; + + /* Create module interface object */ + source = (rle_source_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(rle_source_struct)); + /* Fill in method ptrs */ + source->pub.start_input = start_input_rle; + source->pub.finish_input = finish_input_rle; + source->pub.get_pixel_rows = load_image; + + return (cjpeg_source_ptr) source; +} + +#endif /* RLE_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/rdswitch.c b/src/SDL2/external/jpeg-9/rdswitch.c new file mode 100644 index 000000000..7a839af7a --- /dev/null +++ b/src/SDL2/external/jpeg-9/rdswitch.c @@ -0,0 +1,365 @@ +/* + * rdswitch.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to process some of cjpeg's more complicated + * command-line switches. Switches processed here are: + * -qtables file Read quantization tables from text file + * -scans file Read scan script from text file + * -quality N[,N,...] Set quality ratings + * -qslots N[,N,...] Set component quantization table selectors + * -sample HxV[,HxV,...] Set component sampling factors + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include /* to declare isdigit(), isspace() */ + + +LOCAL(int) +text_getc (FILE * file) +/* Read next char, skipping over any comments (# to end of line) */ +/* A comment/newline sequence is returned as a newline */ +{ + register int ch; + + ch = getc(file); + if (ch == '#') { + do { + ch = getc(file); + } while (ch != '\n' && ch != EOF); + } + return ch; +} + + +LOCAL(boolean) +read_text_integer (FILE * file, long * result, int * termchar) +/* Read an unsigned decimal integer from a file, store it in result */ +/* Reads one trailing character after the integer; returns it in termchar */ +{ + register int ch; + register long val; + + /* Skip any leading whitespace, detect EOF */ + do { + ch = text_getc(file); + if (ch == EOF) { + *termchar = ch; + return FALSE; + } + } while (isspace(ch)); + + if (! isdigit(ch)) { + *termchar = ch; + return FALSE; + } + + val = ch - '0'; + while ((ch = text_getc(file)) != EOF) { + if (! isdigit(ch)) + break; + val *= 10; + val += ch - '0'; + } + *result = val; + *termchar = ch; + return TRUE; +} + + +GLOBAL(boolean) +read_quant_tables (j_compress_ptr cinfo, char * filename, boolean force_baseline) +/* Read a set of quantization tables from the specified file. + * The file is plain ASCII text: decimal numbers with whitespace between. + * Comments preceded by '#' may be included in the file. + * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values. + * The tables are implicitly numbered 0,1,etc. + * NOTE: does not affect the qslots mapping, which will default to selecting + * table 0 for luminance (or primary) components, 1 for chrominance components. + * You must use -qslots if you want a different component->table mapping. + */ +{ + FILE * fp; + int tblno, i, termchar; + long val; + unsigned int table[DCTSIZE2]; + + if ((fp = fopen(filename, "r")) == NULL) { + fprintf(stderr, "Can't open table file %s\n", filename); + return FALSE; + } + tblno = 0; + + while (read_text_integer(fp, &val, &termchar)) { /* read 1st element of table */ + if (tblno >= NUM_QUANT_TBLS) { + fprintf(stderr, "Too many tables in file %s\n", filename); + fclose(fp); + return FALSE; + } + table[0] = (unsigned int) val; + for (i = 1; i < DCTSIZE2; i++) { + if (! read_text_integer(fp, &val, &termchar)) { + fprintf(stderr, "Invalid table data in file %s\n", filename); + fclose(fp); + return FALSE; + } + table[i] = (unsigned int) val; + } + jpeg_add_quant_table(cinfo, tblno, table, cinfo->q_scale_factor[tblno], + force_baseline); + tblno++; + } + + if (termchar != EOF) { + fprintf(stderr, "Non-numeric data in file %s\n", filename); + fclose(fp); + return FALSE; + } + + fclose(fp); + return TRUE; +} + + +#ifdef C_MULTISCAN_FILES_SUPPORTED + +LOCAL(boolean) +read_scan_integer (FILE * file, long * result, int * termchar) +/* Variant of read_text_integer that always looks for a non-space termchar; + * this simplifies parsing of punctuation in scan scripts. + */ +{ + register int ch; + + if (! read_text_integer(file, result, termchar)) + return FALSE; + ch = *termchar; + while (ch != EOF && isspace(ch)) + ch = text_getc(file); + if (isdigit(ch)) { /* oops, put it back */ + if (ungetc(ch, file) == EOF) + return FALSE; + ch = ' '; + } else { + /* Any separators other than ';' and ':' are ignored; + * this allows user to insert commas, etc, if desired. + */ + if (ch != EOF && ch != ';' && ch != ':') + ch = ' '; + } + *termchar = ch; + return TRUE; +} + + +GLOBAL(boolean) +read_scan_script (j_compress_ptr cinfo, char * filename) +/* Read a scan script from the specified text file. + * Each entry in the file defines one scan to be emitted. + * Entries are separated by semicolons ';'. + * An entry contains one to four component indexes, + * optionally followed by a colon ':' and four progressive-JPEG parameters. + * The component indexes denote which component(s) are to be transmitted + * in the current scan. The first component has index 0. + * Sequential JPEG is used if the progressive-JPEG parameters are omitted. + * The file is free format text: any whitespace may appear between numbers + * and the ':' and ';' punctuation marks. Also, other punctuation (such + * as commas or dashes) can be placed between numbers if desired. + * Comments preceded by '#' may be included in the file. + * Note: we do very little validity checking here; + * jcmaster.c will validate the script parameters. + */ +{ + FILE * fp; + int scanno, ncomps, termchar; + long val; + jpeg_scan_info * scanptr; +#define MAX_SCANS 100 /* quite arbitrary limit */ + jpeg_scan_info scans[MAX_SCANS]; + + if ((fp = fopen(filename, "r")) == NULL) { + fprintf(stderr, "Can't open scan definition file %s\n", filename); + return FALSE; + } + scanptr = scans; + scanno = 0; + + while (read_scan_integer(fp, &val, &termchar)) { + if (scanno >= MAX_SCANS) { + fprintf(stderr, "Too many scans defined in file %s\n", filename); + fclose(fp); + return FALSE; + } + scanptr->component_index[0] = (int) val; + ncomps = 1; + while (termchar == ' ') { + if (ncomps >= MAX_COMPS_IN_SCAN) { + fprintf(stderr, "Too many components in one scan in file %s\n", + filename); + fclose(fp); + return FALSE; + } + if (! read_scan_integer(fp, &val, &termchar)) + goto bogus; + scanptr->component_index[ncomps] = (int) val; + ncomps++; + } + scanptr->comps_in_scan = ncomps; + if (termchar == ':') { + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Ss = (int) val; + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Se = (int) val; + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Ah = (int) val; + if (! read_scan_integer(fp, &val, &termchar)) + goto bogus; + scanptr->Al = (int) val; + } else { + /* set non-progressive parameters */ + scanptr->Ss = 0; + scanptr->Se = DCTSIZE2-1; + scanptr->Ah = 0; + scanptr->Al = 0; + } + if (termchar != ';' && termchar != EOF) { +bogus: + fprintf(stderr, "Invalid scan entry format in file %s\n", filename); + fclose(fp); + return FALSE; + } + scanptr++, scanno++; + } + + if (termchar != EOF) { + fprintf(stderr, "Non-numeric data in file %s\n", filename); + fclose(fp); + return FALSE; + } + + if (scanno > 0) { + /* Stash completed scan list in cinfo structure. + * NOTE: for cjpeg's use, JPOOL_IMAGE is the right lifetime for this data, + * but if you want to compress multiple images you'd want JPOOL_PERMANENT. + */ + scanptr = (jpeg_scan_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + scanno * SIZEOF(jpeg_scan_info)); + MEMCOPY(scanptr, scans, scanno * SIZEOF(jpeg_scan_info)); + cinfo->scan_info = scanptr; + cinfo->num_scans = scanno; + } + + fclose(fp); + return TRUE; +} + +#endif /* C_MULTISCAN_FILES_SUPPORTED */ + + +GLOBAL(boolean) +set_quality_ratings (j_compress_ptr cinfo, char *arg, boolean force_baseline) +/* Process a quality-ratings parameter string, of the form + * N[,N,...] + * If there are more q-table slots than parameters, the last value is replicated. + */ +{ + int val = 75; /* default value */ + int tblno; + char ch; + + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + if (*arg) { + ch = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c", &val, &ch) < 1) + return FALSE; + if (ch != ',') /* syntax check */ + return FALSE; + /* Convert user 0-100 rating to percentage scaling */ + cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining factors to last value */ + cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); + } + } + jpeg_default_qtables(cinfo, force_baseline); + return TRUE; +} + + +GLOBAL(boolean) +set_quant_slots (j_compress_ptr cinfo, char *arg) +/* Process a quantization-table-selectors parameter string, of the form + * N[,N,...] + * If there are more components than parameters, the last value is replicated. + */ +{ + int val = 0; /* default table # */ + int ci; + char ch; + + for (ci = 0; ci < MAX_COMPONENTS; ci++) { + if (*arg) { + ch = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c", &val, &ch) < 1) + return FALSE; + if (ch != ',') /* syntax check */ + return FALSE; + if (val < 0 || val >= NUM_QUANT_TBLS) { + fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n", + NUM_QUANT_TBLS-1); + return FALSE; + } + cinfo->comp_info[ci].quant_tbl_no = val; + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining components to last table */ + cinfo->comp_info[ci].quant_tbl_no = val; + } + } + return TRUE; +} + + +GLOBAL(boolean) +set_sample_factors (j_compress_ptr cinfo, char *arg) +/* Process a sample-factors parameter string, of the form + * HxV[,HxV,...] + * If there are more components than parameters, "1x1" is assumed for the rest. + */ +{ + int ci, val1, val2; + char ch1, ch2; + + for (ci = 0; ci < MAX_COMPONENTS; ci++) { + if (*arg) { + ch2 = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3) + return FALSE; + if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */ + return FALSE; + if (val1 <= 0 || val1 > 4 || val2 <= 0 || val2 > 4) { + fprintf(stderr, "JPEG sampling factors must be 1..4\n"); + return FALSE; + } + cinfo->comp_info[ci].h_samp_factor = val1; + cinfo->comp_info[ci].v_samp_factor = val2; + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining components to 1x1 sampling */ + cinfo->comp_info[ci].h_samp_factor = 1; + cinfo->comp_info[ci].v_samp_factor = 1; + } + } + return TRUE; +} diff --git a/src/SDL2/external/jpeg-9/rdtarga.c b/src/SDL2/external/jpeg-9/rdtarga.c new file mode 100644 index 000000000..4c2cd2673 --- /dev/null +++ b/src/SDL2/external/jpeg-9/rdtarga.c @@ -0,0 +1,500 @@ +/* + * rdtarga.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in Targa format. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed Targa format). + * + * Based on code contributed by Lee Daniel Crocker. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef TARGA_SUPPORTED + + +/* Macros to deal with unsigned chars as efficiently as compiler allows */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char U_CHAR; +#define UCH(x) ((int) (x)) +#else /* !HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char U_CHAR; +#define UCH(x) ((int) (x)) +#else +typedef char U_CHAR; +#define UCH(x) ((int) (x) & 0xFF) +#endif +#endif /* HAVE_UNSIGNED_CHAR */ + + +#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) + + +/* Private version of data source object */ + +typedef struct _tga_source_struct * tga_source_ptr; + +typedef struct _tga_source_struct { + struct cjpeg_source_struct pub; /* public fields */ + + j_compress_ptr cinfo; /* back link saves passing separate parm */ + + JSAMPARRAY colormap; /* Targa colormap (converted to my format) */ + + jvirt_sarray_ptr whole_image; /* Needed if funny input row order */ + JDIMENSION current_row; /* Current logical row number to read */ + + /* Pointer to routine to extract next Targa pixel from input file */ + JMETHOD(void, read_pixel, (tga_source_ptr sinfo)); + + /* Result of read_pixel is delivered here: */ + U_CHAR tga_pixel[4]; + + int pixel_size; /* Bytes per Targa pixel (1 to 4) */ + + /* State info for reading RLE-coded pixels; both counts must be init to 0 */ + int block_count; /* # of pixels remaining in RLE block */ + int dup_pixel_count; /* # of times to duplicate previous pixel */ + + /* This saves the correct pixel-row-expansion method for preload_image */ + JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); +} tga_source_struct; + + +/* For expanding 5-bit pixel values to 8-bit with best rounding */ + +static const UINT8 c5to8bits[32] = { + 0, 8, 16, 25, 33, 41, 49, 58, + 66, 74, 82, 90, 99, 107, 115, 123, + 132, 140, 148, 156, 165, 173, 181, 189, + 197, 206, 214, 222, 230, 239, 247, 255 +}; + + + +LOCAL(int) +read_byte (tga_source_ptr sinfo) +/* Read next byte from Targa file */ +{ + register FILE *infile = sinfo->pub.input_file; + register int c; + + if ((c = getc(infile)) == EOF) + ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); + return c; +} + + +LOCAL(void) +read_colormap (tga_source_ptr sinfo, int cmaplen, int mapentrysize) +/* Read the colormap from a Targa file */ +{ + int i; + + /* Presently only handles 24-bit BGR format */ + if (mapentrysize != 24) + ERREXIT(sinfo->cinfo, JERR_TGA_BADCMAP); + + for (i = 0; i < cmaplen; i++) { + sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); + } +} + + +/* + * read_pixel methods: get a single pixel from Targa file into tga_pixel[] + */ + +METHODDEF(void) +read_non_rle_pixel (tga_source_ptr sinfo) +/* Read one Targa pixel from the input file; no RLE expansion */ +{ + register FILE *infile = sinfo->pub.input_file; + register int i; + + for (i = 0; i < sinfo->pixel_size; i++) { + sinfo->tga_pixel[i] = (U_CHAR) getc(infile); + } +} + + +METHODDEF(void) +read_rle_pixel (tga_source_ptr sinfo) +/* Read one Targa pixel from the input file, expanding RLE data as needed */ +{ + register FILE *infile = sinfo->pub.input_file; + register int i; + + /* Duplicate previously read pixel? */ + if (sinfo->dup_pixel_count > 0) { + sinfo->dup_pixel_count--; + return; + } + + /* Time to read RLE block header? */ + if (--sinfo->block_count < 0) { /* decrement pixels remaining in block */ + i = read_byte(sinfo); + if (i & 0x80) { /* Start of duplicate-pixel block? */ + sinfo->dup_pixel_count = i & 0x7F; /* number of dups after this one */ + sinfo->block_count = 0; /* then read new block header */ + } else { + sinfo->block_count = i & 0x7F; /* number of pixels after this one */ + } + } + + /* Read next pixel */ + for (i = 0; i < sinfo->pixel_size; i++) { + sinfo->tga_pixel[i] = (U_CHAR) getc(infile); + } +} + + +/* + * Read one row of pixels. + * + * We provide several different versions depending on input file format. + */ + + +METHODDEF(JDIMENSION) +get_8bit_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 8-bit grayscale pixels */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]); + } + return 1; +} + +METHODDEF(JDIMENSION) +get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 8-bit colormap indexes */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register int t; + register JSAMPROW ptr; + register JDIMENSION col; + register JSAMPARRAY colormap = source->colormap; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + t = UCH(source->tga_pixel[0]); + *ptr++ = colormap[0][t]; + *ptr++ = colormap[1][t]; + *ptr++ = colormap[2][t]; + } + return 1; +} + +METHODDEF(JDIMENSION) +get_16bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 16-bit pixels */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register int t; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + t = UCH(source->tga_pixel[0]); + t += UCH(source->tga_pixel[1]) << 8; + /* We expand 5 bit data to 8 bit sample width. + * The format of the 16-bit (LSB first) input word is + * xRRRRRGGGGGBBBBB + */ + ptr[2] = (JSAMPLE) c5to8bits[t & 0x1F]; + t >>= 5; + ptr[1] = (JSAMPLE) c5to8bits[t & 0x1F]; + t >>= 5; + ptr[0] = (JSAMPLE) c5to8bits[t & 0x1F]; + ptr += 3; + } + return 1; +} + +METHODDEF(JDIMENSION) +get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 24-bit pixels */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[2]); /* change BGR to RGB order */ + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[1]); + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]); + } + return 1; +} + +/* + * Targa also defines a 32-bit pixel format with order B,G,R,A. + * We presently ignore the attribute byte, so the code for reading + * these pixels is identical to the 24-bit routine above. + * This works because the actual pixel length is only known to read_pixel. + */ + +#define get_32bit_row get_24bit_row + + +/* + * This method is for re-reading the input data in standard top-down + * row order. The entire image has already been read into whole_image + * with proper conversion of pixel format, but it's in a funny row order. + */ + +METHODDEF(JDIMENSION) +get_memory_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + JDIMENSION source_row; + + /* Compute row of source that maps to current_row of normal order */ + /* For now, assume image is bottom-up and not interlaced. */ + /* NEEDS WORK to support interlaced images! */ + source_row = cinfo->image_height - source->current_row - 1; + + /* Fetch that row from virtual array */ + source->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, + source_row, (JDIMENSION) 1, FALSE); + + source->current_row++; + return 1; +} + + +/* + * This method loads the image into whole_image during the first call on + * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call + * get_memory_row on subsequent calls. + */ + +METHODDEF(JDIMENSION) +preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + JDIMENSION row; + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + + /* Read the data into a virtual array in input-file row order. */ + for (row = 0; row < cinfo->image_height; row++) { + if (progress != NULL) { + progress->pub.pass_counter = (long) row; + progress->pub.pass_limit = (long) cinfo->image_height; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } + source->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, row, (JDIMENSION) 1, TRUE); + (*source->get_pixel_rows) (cinfo, sinfo); + } + if (progress != NULL) + progress->completed_extra_passes++; + + /* Set up to read from the virtual array in unscrambled order */ + source->pub.get_pixel_rows = get_memory_row; + source->current_row = 0; + /* And read the first row */ + return get_memory_row(cinfo, sinfo); +} + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + U_CHAR targaheader[18]; + int idlen, cmaptype, subtype, flags, interlace_type, components; + unsigned int width, height, maplen; + boolean is_bottom_up; + +#define GET_2B(offset) ((unsigned int) UCH(targaheader[offset]) + \ + (((unsigned int) UCH(targaheader[offset+1])) << 8)) + + if (! ReadOK(source->pub.input_file, targaheader, 18)) + ERREXIT(cinfo, JERR_INPUT_EOF); + + /* Pretend "15-bit" pixels are 16-bit --- we ignore attribute bit anyway */ + if (targaheader[16] == 15) + targaheader[16] = 16; + + idlen = UCH(targaheader[0]); + cmaptype = UCH(targaheader[1]); + subtype = UCH(targaheader[2]); + maplen = GET_2B(5); + width = GET_2B(12); + height = GET_2B(14); + source->pixel_size = UCH(targaheader[16]) >> 3; + flags = UCH(targaheader[17]); /* Image Descriptor byte */ + + is_bottom_up = ((flags & 0x20) == 0); /* bit 5 set => top-down */ + interlace_type = flags >> 6; /* bits 6/7 are interlace code */ + + if (cmaptype > 1 || /* cmaptype must be 0 or 1 */ + source->pixel_size < 1 || source->pixel_size > 4 || + (UCH(targaheader[16]) & 7) != 0 || /* bits/pixel must be multiple of 8 */ + interlace_type != 0) /* currently don't allow interlaced image */ + ERREXIT(cinfo, JERR_TGA_BADPARMS); + + if (subtype > 8) { + /* It's an RLE-coded file */ + source->read_pixel = read_rle_pixel; + source->block_count = source->dup_pixel_count = 0; + subtype -= 8; + } else { + /* Non-RLE file */ + source->read_pixel = read_non_rle_pixel; + } + + /* Now should have subtype 1, 2, or 3 */ + components = 3; /* until proven different */ + cinfo->in_color_space = JCS_RGB; + + switch (subtype) { + case 1: /* Colormapped image */ + if (source->pixel_size == 1 && cmaptype == 1) + source->get_pixel_rows = get_8bit_row; + else + ERREXIT(cinfo, JERR_TGA_BADPARMS); + TRACEMS2(cinfo, 1, JTRC_TGA_MAPPED, width, height); + break; + case 2: /* RGB image */ + switch (source->pixel_size) { + case 2: + source->get_pixel_rows = get_16bit_row; + break; + case 3: + source->get_pixel_rows = get_24bit_row; + break; + case 4: + source->get_pixel_rows = get_32bit_row; + break; + default: + ERREXIT(cinfo, JERR_TGA_BADPARMS); + break; + } + TRACEMS2(cinfo, 1, JTRC_TGA, width, height); + break; + case 3: /* Grayscale image */ + components = 1; + cinfo->in_color_space = JCS_GRAYSCALE; + if (source->pixel_size == 1) + source->get_pixel_rows = get_8bit_gray_row; + else + ERREXIT(cinfo, JERR_TGA_BADPARMS); + TRACEMS2(cinfo, 1, JTRC_TGA_GRAY, width, height); + break; + default: + ERREXIT(cinfo, JERR_TGA_BADPARMS); + break; + } + + if (is_bottom_up) { + /* Create a virtual array to buffer the upside-down image. */ + source->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) width * components, (JDIMENSION) height, (JDIMENSION) 1); + if (cinfo->progress != NULL) { + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + progress->total_extra_passes++; /* count file input as separate pass */ + } + /* source->pub.buffer will point to the virtual array. */ + source->pub.buffer_height = 1; /* in case anyone looks at it */ + source->pub.get_pixel_rows = preload_image; + } else { + /* Don't need a virtual array, but do need a one-row input buffer. */ + source->whole_image = NULL; + source->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) width * components, (JDIMENSION) 1); + source->pub.buffer_height = 1; + source->pub.get_pixel_rows = source->get_pixel_rows; + } + + while (idlen--) /* Throw away ID field */ + (void) read_byte(source); + + if (maplen > 0) { + if (maplen > 256 || GET_2B(3) != 0) + ERREXIT(cinfo, JERR_TGA_BADCMAP); + /* Allocate space to store the colormap */ + source->colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (JDIMENSION) maplen, (JDIMENSION) 3); + /* and read it from the file */ + read_colormap(source, (int) maplen, UCH(targaheader[7])); + } else { + if (cmaptype) /* but you promised a cmap! */ + ERREXIT(cinfo, JERR_TGA_BADPARMS); + source->colormap = NULL; + } + + cinfo->input_components = components; + cinfo->data_precision = 8; + cinfo->image_width = width; + cinfo->image_height = height; +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for Targa format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_targa (j_compress_ptr cinfo) +{ + tga_source_ptr source; + + /* Create module interface object */ + source = (tga_source_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(tga_source_struct)); + source->cinfo = cinfo; /* make back link for subroutines */ + /* Fill in method ptrs, except get_pixel_rows which start_input sets */ + source->pub.start_input = start_input_tga; + source->pub.finish_input = finish_input_tga; + + return (cjpeg_source_ptr) source; +} + +#endif /* TARGA_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/structure.txt b/src/SDL2/external/jpeg-9/structure.txt new file mode 100644 index 000000000..44e48ca8a --- /dev/null +++ b/src/SDL2/external/jpeg-9/structure.txt @@ -0,0 +1,941 @@ +IJG JPEG LIBRARY: SYSTEM ARCHITECTURE + +Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +This file provides an overview of the architecture of the IJG JPEG software; +that is, the functions of the various modules in the system and the interfaces +between modules. For more precise details about any data structure or calling +convention, see the include files and comments in the source code. + +We assume that the reader is already somewhat familiar with the JPEG standard. +The README file includes references for learning about JPEG. The file +libjpeg.txt describes the library from the viewpoint of an application +programmer using the library; it's best to read that file before this one. +Also, the file coderules.txt describes the coding style conventions we use. + +In this document, JPEG-specific terminology follows the JPEG standard: + A "component" means a color channel, e.g., Red or Luminance. + A "sample" is a single component value (i.e., one number in the image data). + A "coefficient" is a frequency coefficient (a DCT transform output number). + A "block" is an array of samples or coefficients. + An "MCU" (minimum coded unit) is an interleaved set of blocks of size + determined by the sampling factors, or a single block in a + noninterleaved scan. +We do not use the terms "pixel" and "sample" interchangeably. When we say +pixel, we mean an element of the full-size image, while a sample is an element +of the downsampled image. Thus the number of samples may vary across +components while the number of pixels does not. (This terminology is not used +rigorously throughout the code, but it is used in places where confusion would +otherwise result.) + + +*** System features *** + +The IJG distribution contains two parts: + * A subroutine library for JPEG compression and decompression. + * cjpeg/djpeg, two sample applications that use the library to transform + JFIF JPEG files to and from several other image formats. +cjpeg/djpeg are of no great intellectual complexity: they merely add a simple +command-line user interface and I/O routines for several uncompressed image +formats. This document concentrates on the library itself. + +We desire the library to be capable of supporting all JPEG baseline, extended +sequential, and progressive DCT processes. The library does not support the +hierarchical or lossless processes defined in the standard. + +Within these limits, any set of compression parameters allowed by the JPEG +spec should be readable for decompression. (We can be more restrictive about +what formats we can generate.) Although the system design allows for all +parameter values, some uncommon settings are not yet implemented and may +never be; nonintegral sampling ratios are the prime example. Furthermore, +we treat 8-bit vs. 12-bit data precision as a compile-time switch, not a +run-time option, because most machines can store 8-bit pixels much more +compactly than 12-bit. + +By itself, the library handles only interchange JPEG datastreams --- in +particular the widely used JFIF file format. The library can be used by +surrounding code to process interchange or abbreviated JPEG datastreams that +are embedded in more complex file formats. (For example, libtiff uses this +library to implement JPEG compression within the TIFF file format.) + +The library includes a substantial amount of code that is not covered by the +JPEG standard but is necessary for typical applications of JPEG. These +functions preprocess the image before JPEG compression or postprocess it after +decompression. They include colorspace conversion, downsampling/upsampling, +and color quantization. This code can be omitted if not needed. + +A wide range of quality vs. speed tradeoffs are possible in JPEG processing, +and even more so in decompression postprocessing. The decompression library +provides multiple implementations that cover most of the useful tradeoffs, +ranging from very-high-quality down to fast-preview operation. On the +compression side we have generally not provided low-quality choices, since +compression is normally less time-critical. It should be understood that the +low-quality modes may not meet the JPEG standard's accuracy requirements; +nonetheless, they are useful for viewers. + + +*** Portability issues *** + +Portability is an essential requirement for the library. The key portability +issues that show up at the level of system architecture are: + +1. Memory usage. We want the code to be able to run on PC-class machines +with limited memory. Images should therefore be processed sequentially (in +strips), to avoid holding the whole image in memory at once. Where a +full-image buffer is necessary, we should be able to use either virtual memory +or temporary files. + +2. Near/far pointer distinction. To run efficiently on 80x86 machines, the +code should distinguish "small" objects (kept in near data space) from +"large" ones (kept in far data space). This is an annoying restriction, but +fortunately it does not impact code quality for less brain-damaged machines, +and the source code clutter turns out to be minimal with sufficient use of +pointer typedefs. + +3. Data precision. We assume that "char" is at least 8 bits, "short" and +"int" at least 16, "long" at least 32. The code will work fine with larger +data sizes, although memory may be used inefficiently in some cases. However, +the JPEG compressed datastream must ultimately appear on external storage as a +sequence of 8-bit bytes if it is to conform to the standard. This may pose a +problem on machines where char is wider than 8 bits. The library represents +compressed data as an array of values of typedef JOCTET. If no data type +exactly 8 bits wide is available, custom data source and data destination +modules must be written to unpack and pack the chosen JOCTET datatype into +8-bit external representation. + + +*** System overview *** + +The compressor and decompressor are each divided into two main sections: +the JPEG compressor or decompressor proper, and the preprocessing or +postprocessing functions. The interface between these two sections is the +image data that the official JPEG spec regards as its input or output: this +data is in the colorspace to be used for compression, and it is downsampled +to the sampling factors to be used. The preprocessing and postprocessing +steps are responsible for converting a normal image representation to or from +this form. (Those few applications that want to deal with YCbCr downsampled +data can skip the preprocessing or postprocessing step.) + +Looking more closely, the compressor library contains the following main +elements: + + Preprocessing: + * Color space conversion (e.g., RGB to YCbCr). + * Edge expansion and downsampling. Optionally, this step can do simple + smoothing --- this is often helpful for low-quality source data. + JPEG proper: + * MCU assembly, DCT, quantization. + * Entropy coding (sequential or progressive, Huffman or arithmetic). + +In addition to these modules we need overall control, marker generation, +and support code (memory management & error handling). There is also a +module responsible for physically writing the output data --- typically +this is just an interface to fwrite(), but some applications may need to +do something else with the data. + +The decompressor library contains the following main elements: + + JPEG proper: + * Entropy decoding (sequential or progressive, Huffman or arithmetic). + * Dequantization, inverse DCT, MCU disassembly. + Postprocessing: + * Upsampling. Optionally, this step may be able to do more general + rescaling of the image. + * Color space conversion (e.g., YCbCr to RGB). This step may also + provide gamma adjustment [ currently it does not ]. + * Optional color quantization (e.g., reduction to 256 colors). + * Optional color precision reduction (e.g., 24-bit to 15-bit color). + [This feature is not currently implemented.] + +We also need overall control, marker parsing, and a data source module. +The support code (memory management & error handling) can be shared with +the compression half of the library. + +There may be several implementations of each of these elements, particularly +in the decompressor, where a wide range of speed/quality tradeoffs is very +useful. It must be understood that some of the best speedups involve +merging adjacent steps in the pipeline. For example, upsampling, color space +conversion, and color quantization might all be done at once when using a +low-quality ordered-dither technique. The system architecture is designed to +allow such merging where appropriate. + + +Note: it is convenient to regard edge expansion (padding to block boundaries) +as a preprocessing/postprocessing function, even though the JPEG spec includes +it in compression/decompression. We do this because downsampling/upsampling +can be simplified a little if they work on padded data: it's not necessary to +have special cases at the right and bottom edges. Therefore the interface +buffer is always an integral number of blocks wide and high, and we expect +compression preprocessing to pad the source data properly. Padding will occur +only to the next block (N-sample) boundary. In an interleaved-scan situation, +additional dummy blocks may be used to fill out MCUs, but the MCU assembly and +disassembly logic will create or discard these blocks internally. (This is +advantageous for speed reasons, since we avoid DCTing the dummy blocks. +It also permits a small reduction in file size, because the compressor can +choose dummy block contents so as to minimize their size in compressed form. +Finally, it makes the interface buffer specification independent of whether +the file is actually interleaved or not.) Applications that wish to deal +directly with the downsampled data must provide similar buffering and padding +for odd-sized images. + + +*** Poor man's object-oriented programming *** + +It should be clear by now that we have a lot of quasi-independent processing +steps, many of which have several possible behaviors. To avoid cluttering the +code with lots of switch statements, we use a simple form of object-style +programming to separate out the different possibilities. + +For example, two different color quantization algorithms could be implemented +as two separate modules that present the same external interface; at runtime, +the calling code will access the proper module indirectly through an "object". + +We can get the limited features we need while staying within portable C. +The basic tool is a function pointer. An "object" is just a struct +containing one or more function pointer fields, each of which corresponds to +a method name in real object-oriented languages. During initialization we +fill in the function pointers with references to whichever module we have +determined we need to use in this run. Then invocation of the module is done +by indirecting through a function pointer; on most machines this is no more +expensive than a switch statement, which would be the only other way of +making the required run-time choice. The really significant benefit, of +course, is keeping the source code clean and well structured. + +We can also arrange to have private storage that varies between different +implementations of the same kind of object. We do this by making all the +module-specific object structs be separately allocated entities, which will +be accessed via pointers in the master compression or decompression struct. +The "public" fields or methods for a given kind of object are specified by +a commonly known struct. But a module's initialization code can allocate +a larger struct that contains the common struct as its first member, plus +additional private fields. With appropriate pointer casting, the module's +internal functions can access these private fields. (For a simple example, +see jdatadst.c, which implements the external interface specified by struct +jpeg_destination_mgr, but adds extra fields.) + +(Of course this would all be a lot easier if we were using C++, but we are +not yet prepared to assume that everyone has a C++ compiler.) + +An important benefit of this scheme is that it is easy to provide multiple +versions of any method, each tuned to a particular case. While a lot of +precalculation might be done to select an optimal implementation of a method, +the cost per invocation is constant. For example, the upsampling step might +have a "generic" method, plus one or more "hardwired" methods for the most +popular sampling factors; the hardwired methods would be faster because they'd +use straight-line code instead of for-loops. The cost to determine which +method to use is paid only once, at startup, and the selection criteria are +hidden from the callers of the method. + +This plan differs a little bit from usual object-oriented structures, in that +only one instance of each object class will exist during execution. The +reason for having the class structure is that on different runs we may create +different instances (choose to execute different modules). You can think of +the term "method" as denoting the common interface presented by a particular +set of interchangeable functions, and "object" as denoting a group of related +methods, or the total shared interface behavior of a group of modules. + + +*** Overall control structure *** + +We previously mentioned the need for overall control logic in the compression +and decompression libraries. In IJG implementations prior to v5, overall +control was mostly provided by "pipeline control" modules, which proved to be +large, unwieldy, and hard to understand. To improve the situation, the +control logic has been subdivided into multiple modules. The control modules +consist of: + +1. Master control for module selection and initialization. This has two +responsibilities: + + 1A. Startup initialization at the beginning of image processing. + The individual processing modules to be used in this run are selected + and given initialization calls. + + 1B. Per-pass control. This determines how many passes will be performed + and calls each active processing module to configure itself + appropriately at the beginning of each pass. End-of-pass processing, + where necessary, is also invoked from the master control module. + + Method selection is partially distributed, in that a particular processing + module may contain several possible implementations of a particular method, + which it will select among when given its initialization call. The master + control code need only be concerned with decisions that affect more than + one module. + +2. Data buffering control. A separate control module exists for each + inter-processing-step data buffer. This module is responsible for + invoking the processing steps that write or read that data buffer. + +Each buffer controller sees the world as follows: + +input data => processing step A => buffer => processing step B => output data + | | | + ------------------ controller ------------------ + +The controller knows the dataflow requirements of steps A and B: how much data +they want to accept in one chunk and how much they output in one chunk. Its +function is to manage its buffer and call A and B at the proper times. + +A data buffer control module may itself be viewed as a processing step by a +higher-level control module; thus the control modules form a binary tree with +elementary processing steps at the leaves of the tree. + +The control modules are objects. A considerable amount of flexibility can +be had by replacing implementations of a control module. For example: +* Merging of adjacent steps in the pipeline is done by replacing a control + module and its pair of processing-step modules with a single processing- + step module. (Hence the possible merges are determined by the tree of + control modules.) +* In some processing modes, a given interstep buffer need only be a "strip" + buffer large enough to accommodate the desired data chunk sizes. In other + modes, a full-image buffer is needed and several passes are required. + The control module determines which kind of buffer is used and manipulates + virtual array buffers as needed. One or both processing steps may be + unaware of the multi-pass behavior. + +In theory, we might be able to make all of the data buffer controllers +interchangeable and provide just one set of implementations for all. In +practice, each one contains considerable special-case processing for its +particular job. The buffer controller concept should be regarded as an +overall system structuring principle, not as a complete description of the +task performed by any one controller. + + +*** Compression object structure *** + +Here is a sketch of the logical structure of the JPEG compression library: + + |-- Colorspace conversion + |-- Preprocessing controller --| + | |-- Downsampling +Main controller --| + | |-- Forward DCT, quantize + |-- Coefficient controller --| + |-- Entropy encoding + +This sketch also describes the flow of control (subroutine calls) during +typical image data processing. Each of the components shown in the diagram is +an "object" which may have several different implementations available. One +or more source code files contain the actual implementation(s) of each object. + +The objects shown above are: + +* Main controller: buffer controller for the subsampled-data buffer, which + holds the preprocessed input data. This controller invokes preprocessing to + fill the subsampled-data buffer, and JPEG compression to empty it. There is + usually no need for a full-image buffer here; a strip buffer is adequate. + +* Preprocessing controller: buffer controller for the downsampling input data + buffer, which lies between colorspace conversion and downsampling. Note + that a unified conversion/downsampling module would probably replace this + controller entirely. + +* Colorspace conversion: converts application image data into the desired + JPEG color space; also changes the data from pixel-interleaved layout to + separate component planes. Processes one pixel row at a time. + +* Downsampling: performs reduction of chroma components as required. + Optionally may perform pixel-level smoothing as well. Processes a "row + group" at a time, where a row group is defined as Vmax pixel rows of each + component before downsampling, and Vk sample rows afterwards (remember Vk + differs across components). Some downsampling or smoothing algorithms may + require context rows above and below the current row group; the + preprocessing controller is responsible for supplying these rows via proper + buffering. The downsampler is responsible for edge expansion at the right + edge (i.e., extending each sample row to a multiple of N samples); but the + preprocessing controller is responsible for vertical edge expansion (i.e., + duplicating the bottom sample row as needed to make a multiple of N rows). + +* Coefficient controller: buffer controller for the DCT-coefficient data. + This controller handles MCU assembly, including insertion of dummy DCT + blocks when needed at the right or bottom edge. When performing + Huffman-code optimization or emitting a multiscan JPEG file, this + controller is responsible for buffering the full image. The equivalent of + one fully interleaved MCU row of subsampled data is processed per call, + even when the JPEG file is noninterleaved. + +* Forward DCT and quantization: Perform DCT, quantize, and emit coefficients. + Works on one or more DCT blocks at a time. (Note: the coefficients are now + emitted in normal array order, which the entropy encoder is expected to + convert to zigzag order as necessary. Prior versions of the IJG code did + the conversion to zigzag order within the quantization step.) + +* Entropy encoding: Perform Huffman or arithmetic entropy coding and emit the + coded data to the data destination module. Works on one MCU per call. + For progressive JPEG, the same DCT blocks are fed to the entropy coder + during each pass, and the coder must emit the appropriate subset of + coefficients. + +In addition to the above objects, the compression library includes these +objects: + +* Master control: determines the number of passes required, controls overall + and per-pass initialization of the other modules. + +* Marker writing: generates JPEG markers (except for RSTn, which is emitted + by the entropy encoder when needed). + +* Data destination manager: writes the output JPEG datastream to its final + destination (e.g., a file). The destination manager supplied with the + library knows how to write to a stdio stream or to a memory buffer; + for other behaviors, the surrounding application may provide its own + destination manager. + +* Memory manager: allocates and releases memory, controls virtual arrays + (with backing store management, where required). + +* Error handler: performs formatting and output of error and trace messages; + determines handling of nonfatal errors. The surrounding application may + override some or all of this object's methods to change error handling. + +* Progress monitor: supports output of "percent-done" progress reports. + This object represents an optional callback to the surrounding application: + if wanted, it must be supplied by the application. + +The error handler, destination manager, and progress monitor objects are +defined as separate objects in order to simplify application-specific +customization of the JPEG library. A surrounding application may override +individual methods or supply its own all-new implementation of one of these +objects. The object interfaces for these objects are therefore treated as +part of the application interface of the library, whereas the other objects +are internal to the library. + +The error handler and memory manager are shared by JPEG compression and +decompression; the progress monitor, if used, may be shared as well. + + +*** Decompression object structure *** + +Here is a sketch of the logical structure of the JPEG decompression library: + + |-- Entropy decoding + |-- Coefficient controller --| + | |-- Dequantize, Inverse DCT +Main controller --| + | |-- Upsampling + |-- Postprocessing controller --| |-- Colorspace conversion + |-- Color quantization + |-- Color precision reduction + +As before, this diagram also represents typical control flow. The objects +shown are: + +* Main controller: buffer controller for the subsampled-data buffer, which + holds the output of JPEG decompression proper. This controller's primary + task is to feed the postprocessing procedure. Some upsampling algorithms + may require context rows above and below the current row group; when this + is true, the main controller is responsible for managing its buffer so as + to make context rows available. In the current design, the main buffer is + always a strip buffer; a full-image buffer is never required. + +* Coefficient controller: buffer controller for the DCT-coefficient data. + This controller handles MCU disassembly, including deletion of any dummy + DCT blocks at the right or bottom edge. When reading a multiscan JPEG + file, this controller is responsible for buffering the full image. + (Buffering DCT coefficients, rather than samples, is necessary to support + progressive JPEG.) The equivalent of one fully interleaved MCU row of + subsampled data is processed per call, even when the source JPEG file is + noninterleaved. + +* Entropy decoding: Read coded data from the data source module and perform + Huffman or arithmetic entropy decoding. Works on one MCU per call. + For progressive JPEG decoding, the coefficient controller supplies the prior + coefficients of each MCU (initially all zeroes), which the entropy decoder + modifies in each scan. + +* Dequantization and inverse DCT: like it says. Note that the coefficients + buffered by the coefficient controller have NOT been dequantized; we + merge dequantization and inverse DCT into a single step for speed reasons. + When scaled-down output is asked for, simplified DCT algorithms may be used + that need fewer coefficients and emit fewer samples per DCT block, not the + full 8x8. Works on one DCT block at a time. + +* Postprocessing controller: buffer controller for the color quantization + input buffer, when quantization is in use. (Without quantization, this + controller just calls the upsampler.) For two-pass quantization, this + controller is responsible for buffering the full-image data. + +* Upsampling: restores chroma components to full size. (May support more + general output rescaling, too. Note that if undersized DCT outputs have + been emitted by the DCT module, this module must adjust so that properly + sized outputs are created.) Works on one row group at a time. This module + also calls the color conversion module, so its top level is effectively a + buffer controller for the upsampling->color conversion buffer. However, in + all but the highest-quality operating modes, upsampling and color + conversion are likely to be merged into a single step. + +* Colorspace conversion: convert from JPEG color space to output color space, + and change data layout from separate component planes to pixel-interleaved. + Works on one pixel row at a time. + +* Color quantization: reduce the data to colormapped form, using either an + externally specified colormap or an internally generated one. This module + is not used for full-color output. Works on one pixel row at a time; may + require two passes to generate a color map. Note that the output will + always be a single component representing colormap indexes. In the current + design, the output values are JSAMPLEs, so an 8-bit compilation cannot + quantize to more than 256 colors. This is unlikely to be a problem in + practice. + +* Color reduction: this module handles color precision reduction, e.g., + generating 15-bit color (5 bits/primary) from JPEG's 24-bit output. + Not quite clear yet how this should be handled... should we merge it with + colorspace conversion??? + +Note that some high-speed operating modes might condense the entire +postprocessing sequence to a single module (upsample, color convert, and +quantize in one step). + +In addition to the above objects, the decompression library includes these +objects: + +* Master control: determines the number of passes required, controls overall + and per-pass initialization of the other modules. This is subdivided into + input and output control: jdinput.c controls only input-side processing, + while jdmaster.c handles overall initialization and output-side control. + +* Marker reading: decodes JPEG markers (except for RSTn). + +* Data source manager: supplies the input JPEG datastream. The source + manager supplied with the library knows how to read from a stdio stream + or from a memory buffer; for other behaviors, the surrounding application + may provide its own source manager. + +* Memory manager: same as for compression library. + +* Error handler: same as for compression library. + +* Progress monitor: same as for compression library. + +As with compression, the data source manager, error handler, and progress +monitor are candidates for replacement by a surrounding application. + + +*** Decompression input and output separation *** + +To support efficient incremental display of progressive JPEG files, the +decompressor is divided into two sections that can run independently: + +1. Data input includes marker parsing, entropy decoding, and input into the + coefficient controller's DCT coefficient buffer. Note that this + processing is relatively cheap and fast. + +2. Data output reads from the DCT coefficient buffer and performs the IDCT + and all postprocessing steps. + +For a progressive JPEG file, the data input processing is allowed to get +arbitrarily far ahead of the data output processing. (This occurs only +if the application calls jpeg_consume_input(); otherwise input and output +run in lockstep, since the input section is called only when the output +section needs more data.) In this way the application can avoid making +extra display passes when data is arriving faster than the display pass +can run. Furthermore, it is possible to abort an output pass without +losing anything, since the coefficient buffer is read-only as far as the +output section is concerned. See libjpeg.txt for more detail. + +A full-image coefficient array is only created if the JPEG file has multiple +scans (or if the application specifies buffered-image mode anyway). When +reading a single-scan file, the coefficient controller normally creates only +a one-MCU buffer, so input and output processing must run in lockstep in this +case. jpeg_consume_input() is effectively a no-op in this situation. + +The main impact of dividing the decompressor in this fashion is that we must +be very careful with shared variables in the cinfo data structure. Each +variable that can change during the course of decompression must be +classified as belonging to data input or data output, and each section must +look only at its own variables. For example, the data output section may not +depend on any of the variables that describe the current scan in the JPEG +file, because these may change as the data input section advances into a new +scan. + +The progress monitor is (somewhat arbitrarily) defined to treat input of the +file as one pass when buffered-image mode is not used, and to ignore data +input work completely when buffered-image mode is used. Note that the +library has no reliable way to predict the number of passes when dealing +with a progressive JPEG file, nor can it predict the number of output passes +in buffered-image mode. So the work estimate is inherently bogus anyway. + +No comparable division is currently made in the compression library, because +there isn't any real need for it. + + +*** Data formats *** + +Arrays of pixel sample values use the following data structure: + + typedef something JSAMPLE; a pixel component value, 0..MAXJSAMPLE + typedef JSAMPLE *JSAMPROW; ptr to a row of samples + typedef JSAMPROW *JSAMPARRAY; ptr to a list of rows + typedef JSAMPARRAY *JSAMPIMAGE; ptr to a list of color-component arrays + +The basic element type JSAMPLE will typically be one of unsigned char, +(signed) char, or short. Short will be used if samples wider than 8 bits are +to be supported (this is a compile-time option). Otherwise, unsigned char is +used if possible. If the compiler only supports signed chars, then it is +necessary to mask off the value when reading. Thus, all reads of JSAMPLE +values must be coded as "GETJSAMPLE(value)", where the macro will be defined +as "((value) & 0xFF)" on signed-char machines and "((int) (value))" elsewhere. + +With these conventions, JSAMPLE values can be assumed to be >= 0. This helps +simplify correct rounding during downsampling, etc. The JPEG standard's +specification that sample values run from -128..127 is accommodated by +subtracting 128 from the sample value in the DCT step. Similarly, during +decompression the output of the IDCT step will be immediately shifted back to +0..255. (NB: different values are required when 12-bit samples are in use. +The code is written in terms of MAXJSAMPLE and CENTERJSAMPLE, which will be +defined as 255 and 128 respectively in an 8-bit implementation, and as 4095 +and 2048 in a 12-bit implementation.) + +We use a pointer per row, rather than a two-dimensional JSAMPLE array. This +choice costs only a small amount of memory and has several benefits: +* Code using the data structure doesn't need to know the allocated width of + the rows. This simplifies edge expansion/compression, since we can work + in an array that's wider than the logical picture width. +* Indexing doesn't require multiplication; this is a performance win on many + machines. +* Arrays with more than 64K total elements can be supported even on machines + where malloc() cannot allocate chunks larger than 64K. +* The rows forming a component array may be allocated at different times + without extra copying. This trick allows some speedups in smoothing steps + that need access to the previous and next rows. + +Note that each color component is stored in a separate array; we don't use the +traditional layout in which the components of a pixel are stored together. +This simplifies coding of modules that work on each component independently, +because they don't need to know how many components there are. Furthermore, +we can read or write each component to a temporary file independently, which +is helpful when dealing with noninterleaved JPEG files. + +In general, a specific sample value is accessed by code such as + GETJSAMPLE(image[colorcomponent][row][col]) +where col is measured from the image left edge, but row is measured from the +first sample row currently in memory. Either of the first two indexings can +be precomputed by copying the relevant pointer. + + +Since most image-processing applications prefer to work on images in which +the components of a pixel are stored together, the data passed to or from the +surrounding application uses the traditional convention: a single pixel is +represented by N consecutive JSAMPLE values, and an image row is an array of +(# of color components)*(image width) JSAMPLEs. One or more rows of data can +be represented by a pointer of type JSAMPARRAY in this scheme. This scheme is +converted to component-wise storage inside the JPEG library. (Applications +that want to skip JPEG preprocessing or postprocessing will have to contend +with component-wise storage.) + + +Arrays of DCT-coefficient values use the following data structure: + + typedef short JCOEF; a 16-bit signed integer + typedef JCOEF JBLOCK[DCTSIZE2]; an 8x8 block of coefficients + typedef JBLOCK *JBLOCKROW; ptr to one horizontal row of 8x8 blocks + typedef JBLOCKROW *JBLOCKARRAY; ptr to a list of such rows + typedef JBLOCKARRAY *JBLOCKIMAGE; ptr to a list of color component arrays + +The underlying type is at least a 16-bit signed integer; while "short" is big +enough on all machines of interest, on some machines it is preferable to use +"int" for speed reasons, despite the storage cost. Coefficients are grouped +into 8x8 blocks (but we always use #defines DCTSIZE and DCTSIZE2 rather than +"8" and "64"). + +The contents of a coefficient block may be in either "natural" or zigzagged +order, and may be true values or divided by the quantization coefficients, +depending on where the block is in the processing pipeline. In the current +library, coefficient blocks are kept in natural order everywhere; the entropy +codecs zigzag or dezigzag the data as it is written or read. The blocks +contain quantized coefficients everywhere outside the DCT/IDCT subsystems. +(This latter decision may need to be revisited to support variable +quantization a la JPEG Part 3.) + +Notice that the allocation unit is now a row of 8x8 coefficient blocks, +corresponding to N rows of samples. Otherwise the structure is much the same +as for samples, and for the same reasons. + +On machines where malloc() can't handle a request bigger than 64Kb, this data +structure limits us to rows of less than 512 JBLOCKs, or a picture width of +4000+ pixels. This seems an acceptable restriction. + + +On 80x86 machines, the bottom-level pointer types (JSAMPROW and JBLOCKROW) +must be declared as "far" pointers, but the upper levels can be "near" +(implying that the pointer lists are allocated in the DS segment). +We use a #define symbol FAR, which expands to the "far" keyword when +compiling on 80x86 machines and to nothing elsewhere. + + +*** Suspendable processing *** + +In some applications it is desirable to use the JPEG library as an +incremental, memory-to-memory filter. In this situation the data source or +destination may be a limited-size buffer, and we can't rely on being able to +empty or refill the buffer at arbitrary times. Instead the application would +like to have control return from the library at buffer overflow/underrun, and +then resume compression or decompression at a later time. + +This scenario is supported for simple cases. (For anything more complex, we +recommend that the application "bite the bullet" and develop real multitasking +capability.) The libjpeg.txt file goes into more detail about the usage and +limitations of this capability; here we address the implications for library +structure. + +The essence of the problem is that the entropy codec (coder or decoder) must +be prepared to stop at arbitrary times. In turn, the controllers that call +the entropy codec must be able to stop before having produced or consumed all +the data that they normally would handle in one call. That part is reasonably +straightforward: we make the controller call interfaces include "progress +counters" which indicate the number of data chunks successfully processed, and +we require callers to test the counter rather than just assume all of the data +was processed. + +Rather than trying to restart at an arbitrary point, the current Huffman +codecs are designed to restart at the beginning of the current MCU after a +suspension due to buffer overflow/underrun. At the start of each call, the +codec's internal state is loaded from permanent storage (in the JPEG object +structures) into local variables. On successful completion of the MCU, the +permanent state is updated. (This copying is not very expensive, and may even +lead to *improved* performance if the local variables can be registerized.) +If a suspension occurs, the codec simply returns without updating the state, +thus effectively reverting to the start of the MCU. Note that this implies +leaving some data unprocessed in the source/destination buffer (ie, the +compressed partial MCU). The data source/destination module interfaces are +specified so as to make this possible. This also implies that the data buffer +must be large enough to hold a worst-case compressed MCU; a couple thousand +bytes should be enough. + +In a successive-approximation AC refinement scan, the progressive Huffman +decoder has to be able to undo assignments of newly nonzero coefficients if it +suspends before the MCU is complete, since decoding requires distinguishing +previously-zero and previously-nonzero coefficients. This is a bit tedious +but probably won't have much effect on performance. Other variants of Huffman +decoding need not worry about this, since they will just store the same values +again if forced to repeat the MCU. + +This approach would probably not work for an arithmetic codec, since its +modifiable state is quite large and couldn't be copied cheaply. Instead it +would have to suspend and resume exactly at the point of the buffer end. + +The JPEG marker reader is designed to cope with suspension at an arbitrary +point. It does so by backing up to the start of the marker parameter segment, +so the data buffer must be big enough to hold the largest marker of interest. +Again, a couple KB should be adequate. (A special "skip" convention is used +to bypass COM and APPn markers, so these can be larger than the buffer size +without causing problems; otherwise a 64K buffer would be needed in the worst +case.) + +The JPEG marker writer currently does *not* cope with suspension. +We feel that this is not necessary; it is much easier simply to require +the application to ensure there is enough buffer space before starting. (An +empty 2K buffer is more than sufficient for the header markers; and ensuring +there are a dozen or two bytes available before calling jpeg_finish_compress() +will suffice for the trailer.) This would not work for writing multi-scan +JPEG files, but we simply do not intend to support that capability with +suspension. + + +*** Memory manager services *** + +The JPEG library's memory manager controls allocation and deallocation of +memory, and it manages large "virtual" data arrays on machines where the +operating system does not provide virtual memory. Note that the same +memory manager serves both compression and decompression operations. + +In all cases, allocated objects are tied to a particular compression or +decompression master record, and they will be released when that master +record is destroyed. + +The memory manager does not provide explicit deallocation of objects. +Instead, objects are created in "pools" of free storage, and a whole pool +can be freed at once. This approach helps prevent storage-leak bugs, and +it speeds up operations whenever malloc/free are slow (as they often are). +The pools can be regarded as lifetime identifiers for objects. Two +pools/lifetimes are defined: + * JPOOL_PERMANENT lasts until master record is destroyed + * JPOOL_IMAGE lasts until done with image (JPEG datastream) +Permanent lifetime is used for parameters and tables that should be carried +across from one datastream to another; this includes all application-visible +parameters. Image lifetime is used for everything else. (A third lifetime, +JPOOL_PASS = one processing pass, was originally planned. However it was +dropped as not being worthwhile. The actual usage patterns are such that the +peak memory usage would be about the same anyway; and having per-pass storage +substantially complicates the virtual memory allocation rules --- see below.) + +The memory manager deals with three kinds of object: +1. "Small" objects. Typically these require no more than 10K-20K total. +2. "Large" objects. These may require tens to hundreds of K depending on + image size. Semantically they behave the same as small objects, but we + distinguish them for two reasons: + * On MS-DOS machines, large objects are referenced by FAR pointers, + small objects by NEAR pointers. + * Pool allocation heuristics may differ for large and small objects. + Note that individual "large" objects cannot exceed the size allowed by + type size_t, which may be 64K or less on some machines. +3. "Virtual" objects. These are large 2-D arrays of JSAMPLEs or JBLOCKs + (typically large enough for the entire image being processed). The + memory manager provides stripwise access to these arrays. On machines + without virtual memory, the rest of the array may be swapped out to a + temporary file. + +(Note: JSAMPARRAY and JBLOCKARRAY data structures are a combination of large +objects for the data proper and small objects for the row pointers. For +convenience and speed, the memory manager provides single routines to create +these structures. Similarly, virtual arrays include a small control block +and a JSAMPARRAY or JBLOCKARRAY working buffer, all created with one call.) + +In the present implementation, virtual arrays are only permitted to have image +lifespan. (Permanent lifespan would not be reasonable, and pass lifespan is +not very useful since a virtual array's raison d'etre is to store data for +multiple passes through the image.) We also expect that only "small" objects +will be given permanent lifespan, though this restriction is not required by +the memory manager. + +In a non-virtual-memory machine, some performance benefit can be gained by +making the in-memory buffers for virtual arrays be as large as possible. +(For small images, the buffers might fit entirely in memory, so blind +swapping would be very wasteful.) The memory manager will adjust the height +of the buffers to fit within a prespecified maximum memory usage. In order +to do this in a reasonably optimal fashion, the manager needs to allocate all +of the virtual arrays at once. Therefore, there isn't a one-step allocation +routine for virtual arrays; instead, there is a "request" routine that simply +allocates the control block, and a "realize" routine (called just once) that +determines space allocation and creates all of the actual buffers. The +realize routine must allow for space occupied by non-virtual large objects. +(We don't bother to factor in the space needed for small objects, on the +grounds that it isn't worth the trouble.) + +To support all this, we establish the following protocol for doing business +with the memory manager: + 1. Modules must request virtual arrays (which may have only image lifespan) + during the initial setup phase, i.e., in their jinit_xxx routines. + 2. All "large" objects (including JSAMPARRAYs and JBLOCKARRAYs) must also be + allocated during initial setup. + 3. realize_virt_arrays will be called at the completion of initial setup. + The above conventions ensure that sufficient information is available + for it to choose a good size for virtual array buffers. +Small objects of any lifespan may be allocated at any time. We expect that +the total space used for small objects will be small enough to be negligible +in the realize_virt_arrays computation. + +In a virtual-memory machine, we simply pretend that the available space is +infinite, thus causing realize_virt_arrays to decide that it can allocate all +the virtual arrays as full-size in-memory buffers. The overhead of the +virtual-array access protocol is very small when no swapping occurs. + +A virtual array can be specified to be "pre-zeroed"; when this flag is set, +never-yet-written sections of the array are set to zero before being made +available to the caller. If this flag is not set, never-written sections +of the array contain garbage. (This feature exists primarily because the +equivalent logic would otherwise be needed in jdcoefct.c for progressive +JPEG mode; we may as well make it available for possible other uses.) + +The first write pass on a virtual array is required to occur in top-to-bottom +order; read passes, as well as any write passes after the first one, may +access the array in any order. This restriction exists partly to simplify +the virtual array control logic, and partly because some file systems may not +support seeking beyond the current end-of-file in a temporary file. The main +implication of this restriction is that rearrangement of rows (such as +converting top-to-bottom data order to bottom-to-top) must be handled while +reading data out of the virtual array, not while putting it in. + + +*** Memory manager internal structure *** + +To isolate system dependencies as much as possible, we have broken the +memory manager into two parts. There is a reasonably system-independent +"front end" (jmemmgr.c) and a "back end" that contains only the code +likely to change across systems. All of the memory management methods +outlined above are implemented by the front end. The back end provides +the following routines for use by the front end (none of these routines +are known to the rest of the JPEG code): + +jpeg_mem_init, jpeg_mem_term system-dependent initialization/shutdown + +jpeg_get_small, jpeg_free_small interface to malloc and free library routines + (or their equivalents) + +jpeg_get_large, jpeg_free_large interface to FAR malloc/free in MSDOS machines; + else usually the same as + jpeg_get_small/jpeg_free_small + +jpeg_mem_available estimate available memory + +jpeg_open_backing_store create a backing-store object + +read_backing_store, manipulate a backing-store object +write_backing_store, +close_backing_store + +On some systems there will be more than one type of backing-store object +(specifically, in MS-DOS a backing store file might be an area of extended +memory as well as a disk file). jpeg_open_backing_store is responsible for +choosing how to implement a given object. The read/write/close routines +are method pointers in the structure that describes a given object; this +lets them be different for different object types. + +It may be necessary to ensure that backing store objects are explicitly +released upon abnormal program termination. For example, MS-DOS won't free +extended memory by itself. To support this, we will expect the main program +or surrounding application to arrange to call self_destruct (typically via +jpeg_destroy) upon abnormal termination. This may require a SIGINT signal +handler or equivalent. We don't want to have the back end module install its +own signal handler, because that would pre-empt the surrounding application's +ability to control signal handling. + +The IJG distribution includes several memory manager back end implementations. +Usually the same back end should be suitable for all applications on a given +system, but it is possible for an application to supply its own back end at +need. + + +*** Implications of DNL marker *** + +Some JPEG files may use a DNL marker to postpone definition of the image +height (this would be useful for a fax-like scanner's output, for instance). +In these files the SOF marker claims the image height is 0, and you only +find out the true image height at the end of the first scan. + +We could read these files as follows: +1. Upon seeing zero image height, replace it by 65535 (the maximum allowed). +2. When the DNL is found, update the image height in the global image + descriptor. +This implies that control modules must avoid making copies of the image +height, and must re-test for termination after each MCU row. This would +be easy enough to do. + +In cases where image-size data structures are allocated, this approach will +result in very inefficient use of virtual memory or much-larger-than-necessary +temporary files. This seems acceptable for something that probably won't be a +mainstream usage. People might have to forgo use of memory-hogging options +(such as two-pass color quantization or noninterleaved JPEG files) if they +want efficient conversion of such files. (One could improve efficiency by +demanding a user-supplied upper bound for the height, less than 65536; in most +cases it could be much less.) + +The standard also permits the SOF marker to overestimate the image height, +with a DNL to give the true, smaller height at the end of the first scan. +This would solve the space problems if the overestimate wasn't too great. +However, it implies that you don't even know whether DNL will be used. + +This leads to a couple of very serious objections: +1. Testing for a DNL marker must occur in the inner loop of the decompressor's + Huffman decoder; this implies a speed penalty whether the feature is used + or not. +2. There is no way to hide the last-minute change in image height from an + application using the decoder. Thus *every* application using the IJG + library would suffer a complexity penalty whether it cared about DNL or + not. +We currently do not support DNL because of these problems. + +A different approach is to insist that DNL-using files be preprocessed by a +separate program that reads ahead to the DNL, then goes back and fixes the SOF +marker. This is a much simpler solution and is probably far more efficient. +Even if one wants piped input, buffering the first scan of the JPEG file needs +a lot smaller temp file than is implied by the maximum-height method. For +this approach we'd simply treat DNL as a no-op in the decompressor (at most, +check that it matches the SOF image height). + +We will not worry about making the compressor capable of outputting DNL. +Something similar to the first scheme above could be applied if anyone ever +wants to make that work. diff --git a/src/SDL2/external/jpeg-9/testimg.bmp b/src/SDL2/external/jpeg-9/testimg.bmp new file mode 100644 index 0000000000000000000000000000000000000000..012223eb67e30448ecb29b2c8ce501f98c0d464c GIT binary patch literal 35050 zcmb824?tGs+5b<&x0o0aGZGwFC^|`ICXh;x8Im#+2U;>ff^33G{z1!$3Ye`{ZzWc) z$P#5*ZtRcfT4siO%fZOaNL~5rD-yVB%*+zmB!m4v-|L(Qt!=;e_q)%-c@7VckLPo~ z*LB_3{pZ|Ia@t=XajYcvahz{)bb_BB^K*$4Xs>^1cZvJkh}aQM>JxW6vDZ~PH)cTIug$eB26t`i%Z>&*MrYG=fa?>Jlk@QyQM z>0GDyz9#4T@nf8(kKcB#AN`p#=l)7((UXrjOJ+7XFYNe@6E}X76Q6vSlYL9FvwrDp zXKMCC&g7-va}K_Jz_~B$XHIR+TIYtFQ=N>l?>KiYUF~Gwe%6_gzT26Vc;4Bv?IUMN z^`p*6U!8ML=45BnvU2B!2@g42{&LD`uBdSCeR7_&AaAa7=-0n?%4(l;#wNexjLn(u zEL!|GXA9@?`_ffT^T!>|b>F(pnZNX2=g8qR&e*hR&f?pm*Ve(2<;oO5oy`E@6M zcBhkjcb$_m?P2GUJa2dC%NaH7@6Plm7dnqW^_cU$v}7kWXQp%JlfOG@4;DHP zu5NOks@v`?e*PY3YhjLab7F@xKDovD&af_LdVZ1f!(aZ$@!gW-+&-h#`Sy+XI;juj zIIkbCbAE8gZ=D}**x_ur|8?j0jsN9z{QM`*3)LSwPjCK%^T$1}IzOuTgR|)SZ#%F3 z_PA63lV3W&TejG_XKuFhm+m%a(OqviOIAPU{AP8fv;DXGoL@ZtoU`-zC(bYGUT|hi zKIkkhsCJ&8{{v^y1G}C7%$VUczR}>s#_w@9ZrS0Cy=S5`GCtLL<>fD&dD+>{eNUD+ z6;GUZw*TZO&d`MCoSz-q?(F*0>rTSdBAXMw&$Jl`#*Pn z{_D4#th;~a{AlUx&U^p!zO#7Ka_5D)uRAd#YMjIg#ZLA8i=CUNEpnEw{;88bxz!mv zd5`n$aSu3;?yJI|TAjNmPIHzqZm zo_89ad={Prr}X|(XX?D~Ig?ZOIQi2uoWuLxbY9(a*10+1HRq0*mCm~BBLefGC($WgjW~Na_X_wZ~k+gfu9oPQt`-|7!vUcp) zoqNxp|NXlA53XDH%1wI~FTUmfrHtJ(_Fug5nJ}L(-Ivb8m*DeCfG?pY!IzK_6csjn z^ysN!c^&Q_^d_IL$QNA{T3Q-f8d}2>KcO|H{904$ZTd}rt_j#QF>2zbO*Nr+-(6D^ z(9yA}rsnRu?}o9XBcvjvAOu1cLmib?k(O2wlC<#JM~xB4or1h#-GKMjtsC^wO^g4Z zDEBlUkIQy??yLit>d&Yj{HGbWjC$; z>)<8WbwI@;&f3#a&!(G^)flFJ2R2|+)T&ickWm5>&~Z`C-7pq+K$#X&fx-H%)Qq(v zEh#FgFQ&TFgBg3vA!)g8-Nu7J{wsn031{)xe}3E8TlQkB64LDO0%=Wjh7Zhy^n{5) zLF~2h0K6zVT3m)`GJox^!s>$%%Dv*?l6)TLcz_r?t zw2GwN($RnFW5*skw0HV>%=O^oAN}*m```AzKJR_XELBEodTCda;lr#litM#${8C%7 z5Tkve(E@Nc7f#1+F@wcOu}HSi(2R^tn=(vBASsgZZbxJtL>U~=D=X4gn8k)9MSXL2 zudUjtANt1hSAM^4-T6UB{#So=E&QK>58d+2jPz(z0Isnhc2&0CZ4V8jwN7 zKA*9e3-)pfNiTbHiVn4UOQ=4?EyO2Yc2=OD3&)c^Mx~8XcnwKQ3fbNFSz^wG6CJzr z+X(sl^Zy?*Ui7bTxn=AvV-M|l<k=W_l>`O{~|@!9@@Eg`W5E~{eLj_UZAmu zURn3xQ!{5qu84@Jj);!1;w%s0#E2IL-JVfE|o%G1(dF( zHH$#w-_>xyyLglNBOd5VsV5L;TGR;%NlLooOFCLDIsKLCM?N}28nF0cie9(x#i977J;xTvf7B~Xf(`-j`mGV3kn(1;S0T6r~BoCR>t=g5$)H|Qm`;k zAqEr|2b7k|k{vhB_=S{=D+=VI*lJqRZuw(x<#Ef{wPO#h{q~`~J3rd{(H?T0|BH~l zw1;kfH8QzRpFVMubK{KgMDq#o+)^H4q%LJddUSPlC}9Q}sUbUtBq5~BsMsPyyukMr zLf0wrRq`L#P!ozfDyTYKMs&m@d8oL?>Q#{FxbUTiF2tP0w~U37xN~UlM<1EF_LBU& zgRzI6KU`l}SXke1A};QPi3r~b4^dC$$Z3X46oPS_>XC#MK~#|;d1;v1MQ9i4cL7l^ zQrO8CVbs6Ks7bi4IIZJ4RUMA%4!8`hB8}`^zfyUmrOiyjg3sLX#zithXXVhLBYOwE zLTvr_LXyUVJ@%PzT{RTK!n2bpaUixp^(DgQ6Q9dFh3Ts4OAiXNBqt~&X?OA6ii~>L z=HeKT3FPg>rw4c@JLbBGguJ7o*mQJUe*}+*u_`B6q4o!rN7C*)Zn&s=T)cDVk)1n{ z5g}jMd;Z8x|JEg4#9MBCwNK&Dwzjiv4UL}}&e)OEQ5+y0on9S{&_L5h;gK@jq%%z~J$k`Z z-NpxyswK~#Kd*G>-?g#?IrfpO4i^??$7i=?pSxH`;aQQ1x*|f^&$JY!mmmbC4QU!; zGD;%b*!?r5{$vmNtb&b_xZ;40im0TH04fd&4Gc?l+`WGB2-8A_BsINpQNBuzCsSQ} zh{Sa|t*ik9);%=+B2)f~Pd@WVa((^Kp|SC8XU~Oi#ZqOfUQtMOJy9B3iIBNQvolQM zY*0{0Q&@2?oCk8jJTE@tU9N~!{fiPHEKcZ%N{Xtu4r9Hbqid-Cy_XLpq2u4Ywv`Bo zI6KD@chK?o1Ez*8oVxL~hmQE$B^M!*zm5I-^L_f%4vlS#XNxs&G(>hMWT+=B*7yPS z9AQ$55yxyvZw?AdYkDdKWe~{#y(dpe`^`8xq7ZL{xhP;$z{G$A8q2hbX-RrIQa>t< zGc{FL0=UBZ147cy^gT$PbJ5w4wNP>kIu4kT7m^hA#sJdui~jCEy!A)9g>B(&`T1=i z4h;{V+z^-BOk|~q4@}!GW)!6!>~K}-ICIFtrlMZ`dJ!+SSN^I?K!p)nLzPcYfHjRb zB?NRtg+x_&#%ht&cJe_&568;qC^WK~7Rp*LBmpp})jM|Y6$8RTiqm#4ymrH&e-?7_ z-=A+7+BOscrQ^`HdI)8!LM*o*D5o@k-aO?3B>pIuRB0Avb4&WnAz@8EiDXK8I2Sba z(@RD9VR3N)hzXn6Xhu$q0aQ4YGnbx~OK;L~Ro%cEGrb4jnn9Bvf^wAGdn6%EM@9 zQil{I%~7u7)dpsZw2+>8{N_uCtSGKHvwP!fswh270LLD>^~!o`jI(Fsg_#{+8J`_H zd8?{N?9`+LZ;BbLNWWA(O6p2VL_}_KZnIl^c$hqyre>e6y6WJe+#MRwu{){*{RGG^ z%F4t5F|JUz91==JjuqR33+(x#H#-X~n+c;)2-&27RfXJoK&G z4;KzCY{L-^GCn@O?Ogcetsn|8u3URe6=3b%3_xyJtp_{Fs-4mw8Yrmf7ZNCAb>Te3 z&YS2_d_eMA6Y9Kz1O8tO8oK2ilp2xT340CnJd4$aZi^+8!5Vbc4>Jz3T>q zrTKgTivrF}T}NJrw64T^zB8-7u(mC>@+<=C!R~B!_~dZ#{5m2doXsxk1s&aZOC`}Hf&jZAH!U(UpmU}m|doIzWc9KnaHP!qD?=%kNPE(#&#j3H5iBrk_iy&bYw z|C6VpU&}L74}LkBp>yu{Akv_PFrvD1#hDogWvzR@H7h&5tc+NScqQ>YNC}^(qvwyV zGkQXn_bS;dpZ@?l9ufVjn{&5CwxkzDOF$K1dhJ#+n$^On{^PtYlNQjuYJjLH9r4IT zHI}b}hg*`YdLHRg5_eRUAmoN4JFOidm!nbt%KZ=K;fyqBqpPDs2Nrd{J>$JwZ~E4K zv+~PYd*UlwTjNUxm-NK@t&J*z4^hWpp2r7q9WRR)upA;)#-2l*SG%j%2~Cottly$t;ko>8f<`K z1T?lDMhGt|{>Umq&n+(|1P~!9%?-I-xhqx#`7|0}l!~ENgLsWa5M{xkzKKi1CLyHE zRCG(0ASA}RDF8+l&scR}4(XEWH#{<_Y3gf(ES;g_`_{*Ao-w4@S7d_>(bWXD#_ICi zS-02b=LZJD2ww>W8!d?sjE@f#V_Vx+S46k|@H?a-o57a5oECvjC+Dlh6rOug6TL3Mw#iVRZCV`F-F``L_FD%3v8ga8^s^rZhGk; zV;np8962)R@duwO2=d8F?85Tt(dD_TpUls%3~X(M2*TFNl1ebG;xK=V4VSIb)zK^D z6lFOUd)#CIEYD*7gkElkj(xhY))hf?wz@IYQ<2Ia^QEuf^;AEjgcKZzMoE<^9WA{v z1urBz_A5Ke+X}7=U)s3g{JIVA4Vc=5D{>9Z;Y({6ZE0>Utj#BciVn0^)3HPv>Oowk z-4X8hMKG1m`HM?vxV=)klBvK~GUM={@j?|vw7cM_l#l?bi&=&L(c+ewCH%4RUBD=1Eb|apMlZq|mamY}KnC z6<;rg^JMf}tmyoRQqycTvY}5ypFS|s>zbe(6iPSTF!qYIs&>ps2+4D0y!>*5ykylS zA77%#8r2(fOf(ZtkZFwnDaY~j6=YCxI?=l*x+WtcxAxp^Jw37K&Q93XewN_b#*Y;o z&|;4$sVSFHS(cQXt2!4RPF&qeyz$G3rq)Ene0jKk;cqVe6w)9s2vK=TM#5@tS66Q2 zwxF7tgbuWvn6N1$gHbpTsiBnuB}|M$Mwb$ogiwzKlGLxGziPCY1Dr|dhqPxHHNOJJ z=(xhRb5+^df$bk8wwLAm0hO9sJe5DTrT{5K*bPxV0e)B1L9+{lj5>(hYMT-T%9ImR z%BQILjE?xD%oQ2C`gF|nWMY7nbW@*3qAJ;{7gi@xe|V4>>jILUDB`NeXIMx# zimF1YYG+51Q!;8ekkPV?h={ntpb3(evU?n0tD@$N=5zD<4fyCfMF20YDT@77@k;yZIRxoKGAu41E=E|u= zyK%J?Q>AuXFloUg3$32DdJgI8X!VEdbRep@z#zK61+5Sw&5Vp9DyHc2?vZJ4)4JlIsMOk^4m{T9e zsiI?COEa>;DZ#=|Y(>74Cu2{>#`0v8?q3blQXm;C|2Q{NQKwH=^2}F>1~-$@9=t72ng-*%!Nyk22g~>>{AdeYJp&0>5zdSILi8k=k8U zcND|aVT^_-J0-pbrI9I8Ez;6Zj;I+=2pM$yg!UNuTW}Q;vgu*FSY>XMld)CtfhlD~ z*!Xj?;q~;CtG|P?HBJU<<>bjKnScV5Wqc=3Vy|2PH~hNQ$`qLZsZO7+K7EqAB9jw> zCZ=h$KcKjyn1S`sMgopi9g3=cW3|Aez>2N9jJ<~HSJR$_#})*-E2FOzOcK>1UvWh4 ztX}w6t$n%Di+63tr7ZEit$XLWQ0$)O>FTJ^;Hn24_Gc!K+q%lI6i6EJXiEojf3Q_o(RFWw@ z@xfK+j>Vpfl|5Pk5-Y8$Lc)}i{w0}g5;HqCmf@eR1X=*y=u|%C1eTiHC%I2#a#u3O zn&3k1ZkizbplV%?z#^96b2ku__lb99+8wDg853 z`uE4`rDgo!*ulUn!m9sAg<2#IGbLS32C^%;t0RF4E>>vRQJ3M3Jn%<1=D7aoGUAdH zY*pG7L$aA4ff}MqtQXSwyVZ=~`Dnm(Vz-f3&B_n#5n^mxJzBYxMi|d)c9OB^h}pup zY+2^Ao@KnfC$lFw7)HEPaa4aqzW&Rg#3VSDy~bx}gYSpjI^_iIuG~V^96&}UCnqn- z%PUsHSdA)d))D~oM^{IyA-&-0R+Fn%IYB|G7-MQsanNQR3H71^W^sC__4=Q>L!b?hRmI`TSQ1!ff8qT5FOyc8B?>$zc@u(_NJPNxFJ9<@vLrs3IE>#~ za#wz0>txz-4TWR?l&+8kqX*nSdeTI4Iyb&bPyCVAqZ@IcG+XuiB>u=OQm^<7RkBh) zjv7@^@OHt9QOMW{f2WI&yma~Gc4^SYDhFv~h`nMO0}9JhOGxWf!DI?26Qf*KQlg6k zB&JFr;E~ZC`p(hAmyp!?YUGca z`stgf-W-DJC2D;vfYS3xwU{0M+)87WIZCZj1#iFo_L(z+gtr(c<$VV87c*-HwgH=Vm;SKSwFM2ZST9pu-_!WtGkz^?;F(tQERWa@(EqT3US&8eI2x(eMNX1^`j0>MK;oY*B*2=Sm z$uoxpWK>tTgiQL6c|hjnJm{JryE_#>Kwe*-9n?8L)zI{oLW(E97GCAj+wJ#&i?&Cj`#xSRCQtrUnG#ZeTD|& zW;#KMA!`LSlXJt{&@=~Z`JGD$Bo_lEWtMfBDXs4&<^<~fo|JqDeA;v$C?T&cCM6?TyHYW|(R?i1P*v&+A}%_QWN?xjHU!?GgCFy=p5R5@BxrZl|A&OVr>LasG*$uW@ z6^f#$X;g#MHbe^#AJD=iB4_+3Kk==GngK7ov37#sd5d> zd4XImr_1b#p;)ZdRU+5pMcFEXlHFqCdZ<)k@KrJ6vxW^DcDlQ#If5kh?#AkI5kYyQ z=iNC^^+*&wR;$FQ4AlgMQSRxwrOPPDQcM-Z%?HGYj`GL-YY06M?tgm!{u}2|nXK3h zo?D4T!dS*>QbFh>jRM!i$*@$;EWQkjqj?!?>AL-yH>RXm!qY#qN2W^?RJewy@QS69 z5Mix+h+I;iBgdqYl8`D5Cn9M0M}OF_IwEbs=s*AY&O1l1T%gf7FW4BQ=ajNuDiJYi zjIyybv}lpZ_`+rTUUnhzM?Kg{N4)ZjB!pCor}jwhVa8Nr=(G}pT2(x7Fd*fQT>7%W zI${S|tvzUFaUsM=S*}bS<&>(TniVOTVvzPuLGno=tzsrqFhaUYW|uSO**LDcUv$RA zNu%$&>(0?61TZoZVA4s*1rk&7$AmP-#>Pf!5MSr!QI}O*M%lN<)6ejPC?%gJ^c0NB zZ6WM*kO(B#)|Pdb5g-%eOR7{ovZ<9-M|G(4icb-}Ucb;2!r9Z*TDENdawV_I#+8y2 zgJ_bt5y@U4h;iNYkNE_NNeC+$KmPQvVataN>%OL6=)h7&cN;S@LWbXe*Ij?UbND1W zi=`tYItn%Bn)s!3L`gBC;y@Tb^lh%#eBiRpFQDWaqZHez3sTOR)3m-IH#ZfZ>o_5|=(K{#ZcIS2+W~DSPCc_uRLlEAIiJUTe!&GjYjqPo1)bi4 zt!oPo&dD($hn+qfS6!-U0cug@J^1Il?z-#p;Vz>HMWwK_#Db4031eevBf~W6!q{AJ zpy0p@l*@kb@*3>bTv4EK;*~$1Gw00uuG~>U9UaAyxwZLaIqmIF8v3UCTn23}C^%lQ@3PBYxJ;1dj3Y;$`c$Nftf!uyGh+R=ZRF_1L6Kdx z`4e*5KX^-sFe=i>LWL+6x42#kWNa|wKG-jRKqO4m=$32Gu>~Ntzmy4Bb4!5nywhLw zfvxW%q{W@9KZg-h4XuujPFOO0Dvc0E#^sRWG$({H#2|UqQN>tfw|Et&)1b06oUn7? zWjDBv9Qo-dpME;>)2By%`svd@-alf*wo#*~J6a+OXXWR&qvDG%f|x`96CCnNF&d&B zc$pj`O31+YHi9fo5P|XY-S5u-?(*-NPm;e8kVt2h@2JS={e*g^hMJ4Do)%?ycE4%~ z8I1)-C**|z!IFr#TNxcN8&>aYiB8sdDNtIAguzvl^`wkpH$RC(PZvSNacKv+% z#3%QB`st@P&MBY?lDZ-?xA5?++6f!5KO0!q&HxZf%T~YZK}yE?^D$DhOjRhB z{>tXvdecS3NBMV&CM1bKcj36kP;!=NI_-h%kXb@T*uhX$cZe=Z)~fjrjxuqnsD^$z zE#UQMMjSuBX5YRaDD3Q?Hf`D)Z`||}O07m)F>fi(P4@my;wwP|;&%-FJcB52Ao=+t&53em81h18+x zCQINCUg5(^s^%t+@2*s69acHHAIUj4FZrlI5|jYAjEbmYWeC9Lu7r>sggDW5+bkUb zAZkb3@%Zr_YhYB^898#=!#BM1=sSb{wqe5tFz@+sQ_`8VnQuqV?3#7uz3;xu&=rW8 zfiX&KP>lM5Rs%|!>8UUAWNdsOe;XWM);&HaCSO5^kx2$hl;$9)80z|G))^wl$_(&G z%Wb(By+!UFgOFtytAs3p6;BW*{Q5Wc0v96uv?jK|Vv<;h6591o!$I71ub_?nlY zM97hEzInqte;YJt`jP3coPYeigEJPM8Itz)kmTgsam7RtqGE7-nN^Sqo53kLIm%$o z=5WYkpjQTG2M=x~@5_myrJRyQmODPPE|@$H1d?>fxF%+sbkNBsu}nTgGU_c{2nC(0 z!HGah$J4EkzeESQO8U78+AAF$Bg|RsH>!WyPQsuxe$bD1XCH<$#K*DRf2Z11N^a`ziG3RaMP> zmybA2WX-y|FfKiaN}UNE9ZT}WCuekr1B{nGN1Lk4EJ*sS+@hXGadxJrTHx8S=4Bw) ztQk4-%^Nlh+WT!4C~qD;BkZZGl4o7{;s-H|h%X~W5n}Agp%W4VtGN1gF*yv_p@9ll zpNJdZnu3Ti<8$UF#tcRjf=reSAcnStKwQgpn=hVQ`gJr@*3NW1<}zZfJ>9EwBN7lX z+Il(MS`pCem9kp@oF)ROBut#>DBRd4RMRq*YV!D;<8$Pc#2p|XJ-^o=_wK#oiUAKk z_5Q1UX6;JMVFDm#MZI1{2Y=gy_IARm{4k}2mSP=US!RI@dB8$sYKW38|#%xKt`x*V0xtRSkxs>PHUzD*b6ByQg_5`EkHRUYt7W%<&y_#*A6BMit1ZPp-Y;wewfJ@(MCu@yPRq_kGY72%T+B3ca16;1NX(Il$%0~jU6v4Y3{o8gWUD~xpYd0U z{ZoI{Axc6{?6KJV-`uMUBgWI+apSPnV&-#fS+IZ^$Y!Npw<=Hc$1PaEEElBo>jB#w} z(B%^o%=zPCt-*tD8?2@6)r4n@lE2)B7(UI9Mw4gG{@rb+2VrYYT2Jh+^kB)7$0N#~H zTI-{-p~ujue?4ofq!|OqbYS7W>h#1%vY{gS*Gqi>LAMl$p}b) zQcz!wFyTo@E*xEu`EU6d@yOGy-BZea6IW4ZZ1F?NXpg#(m(Lr$a`@3LyScgiBF5e& zGz6#-$@J6~w$xGUkIPm+{p0WMbJMrhEFd#82Xk7+Xx*uXXpkv%I#!Xhk$9CxLQd?S5M-}YY(RceF|M?%V^ydkq07pujf>vIIEUFOXh$JL zNzYK{t-O5YpJvbQTd`R>YK4W1D0#(hU{_8+l!bBq@xFcg{`gn-{gvJ+5*G3sCNW@d zbY*CshB|9JGsS`-AVVcL*BNH@0)Bn@*Xx#lef)A&i7})?1Y}KB;u6uRu6&Q_^}zA^ zv17;R)N4gZGgJ=}9b+em(MeNk^j1<-^hJ=+VouQ|(mdU4HrK(Rbc;*BcAx zILgUw-4nlhT2;boOR@o_2Uu$XO_48t2O`kybNnN7vIjzJ9Wfr$dTbL z?iEqYF*}z#(%!B*+pfCfUWA-GzPmMR*s`qp^iAXdVPRpzhp&Wd5}3n>yM*&V9I)>E z74N*UP-EqyV&lM{po`aXR~S=MQx6;;ac0E(_r3M*+^m%4%Z4$j2u4NEN*OC>#PGfX zX=Y|1qfrpLkk;Cz`;GEldN*`1>~xkwe@seUYfs&6$KWCIa8(!r(vCEO=}8*F46L*& zR$T`2MzuP4U!dNtB&ZdsM0U$vAX4AyiS;4XlQ!Y_%=FUEWCL0pr|m zIpolwP4ofeF;6heHPzvlOHT?i4oAmVK6>bhm;5@qLVk(QC`EYSz{?{>+<4FLe(~48 zb`K_|mN7rx5Mg8zi^d3J+giy@=ntU7h6baA1QIy*79EwLn~=*gG1u_~Ew@*dtbi70 z3=@0dqku<&o#0%jd|g)vQ{_|J+7o4{f`rj@tX)C#FoZF4@;U630_41v4B5?_w{rMY zRxo({hBsgomzk;CTK+1gAoq>9am>?y{NwL_@sEG3hD#I3OH!7l$Y^0SNL}@kk}~xN zaDwjn+GwMKk#g6%`E@inzWd!}b^U3CEbCEcIYH^`)T${AL{eoaG^4C~@+f72IHy;O zC_*vsx&4E8l>%JEm_L)j9C|wPmgMbTaQ)Gv_#)91zIm!0M{hj1?!ALA;g1xT64Z;$ zlF)RX%0^$I$dYv6Srqgj&iJs4-mR?QRTmK1gufs)Y~;+Ut$JU!>e8-IP{ zufIoi$b?J{v7uy2YmW&T&V<|&%L!y^Iz>0?n57BEE5_J=KKUw^ixCn}xCUxe)09R? zEE_5Hk7LCs_2{;(!hreQ{11!~8Q&$HpBqEWdF;~Rq^pG0u&@QYKVBj!B_oh`j{ejA zubn^tIFuXRJjbGrbc2LPwnq3yfhTdBlz1YnYs!&5%Bjgq)Nf-M^7d z7EoEGLAf@P5hGMhN1jq=JyL!^TF27y>vV!ZCP$;tKUqeiPB#fjEiZe18Jp9t4`UvT zHUjs_*a?Xrfaew*QlnTCE}eaJ_=4dxMo%3*oJI!5dQ^6LC*^(+Kl%{Mf<4w_#gtQqVk7 zlyXINC3=vIZisO{EczpJS*TqYAdqwv0t~4wm&&A6ce9ErCe74|oq#*eh45aQ$%*e$ zRiopsjVp&w3JV*3{}t1x|LmuKe)dl*|0KjeQ}_S=XM6V^xe3U1@5xq$WE%^Fd588I z-RAp7*u;)gr)Xa7*s+hUoS+9So6(&Z@+!b)yBwO9AtIF$TKTrPof4g=%yqw%8@v0L4qel z5^@WhnI&G*!uuqh?sb(~Vhm2HOQBtf!u*g960kLgNfTaq1PXDNgiNG=Pda90oqlV^ z^&e9?4tT~^Cs@07=QsZF)1UwJr$2q*fxSBqv0UFxdvChwnU7!u3HdVzyl9V{{x8J9e(JhoAw;qGuDkc3Z_7^6)~Qy*{X=Sxd0VM zZr?s~`?NQwJ#3Vpe8NcNUw-(Ht9u69U1PeZDmcEf?OdDs*OaB3keHv%nd6*OBn!`W z%0jn(byqhDX0C~(q&0M}*QLZDQ%qT=xRnmL8uHKD;*GJry|sPrE;%H5Wmfl#vsZ2E zm^fs>GybJESfSw?l$~p}@Wj|X&m1}gz2>iKda5*Jyj&~RN>VACT5wzL%CbUxJO*{VKKQzt$Svz;FU623As!=9FVit{HxoJ z(G}vw80%zKKeJhJd{r4aFs)_o@!Hca;SR(QE3?lw!woGGFBO&{y>q>nR04hP)CyJQM=%- z^40j;=wPLnpv+p5yjRiL#niqHKw5U__wKHo?wmwwNm`M=nY}bBAz{eW$1g0E+KUL> zSPWK-CYf{;p+SmKuXgU+acbJdjIXPR@!BVT_hh9QdrAT|OObjpP+5VsDcjsILd~rS z4%XKyuOu%OwO4pS(TE_csB3?&Dr*l8tZEG`!)$pYkg7P`AN&!wMt@21{0d@g2$PsK^^RIqUgORL#1SMy9?XThAl(-05oUjOau4@*Lc zX^#2n(_dV(`Yf3JX|c1?5jR*7bkqZ)+gWwf!)@k>)Pm}4BZG0_G}9(nadw%;^mu!n zaZ2YZ=6hBKBO`=TPCY0tVs>C#TV=bVO%B@4-F4+#-}#Ola@UJLdE~*40N;uqKYr6q zF3!b!i?zlm(TtIs#G@OFqDwV9K!cJ+sRcVenKtd=hkyIqhqZwxpPV-B)TzFG=ZyH` zxocKeGN?mGE0oHiJ%hCKlM-+tkTlX}kSHWZ{*h`E{+^PengvuUi=499_`%%$<7sH0 zqg`7dcgR-ait6N;i#zUm>pOp)K;YT+;*TDAKWb6&ic247scjeUf@9*2?n`4Gj}R;6 zju$2`l|~bLh(PH+`6GyeR1qXWhgo!Mj_=zyYTLGL4Xg75D~I)@^i&QWJeb>Ya4Ld> z76+nvseVL*Q`8GS?DywE6=Mm&-njxe}Fu-E=w6&59X+8b}Q!;FY^R zn05H7w1}WDHp1v<^FNP0@{#Hd0?$s(d9W!UHaiPUAX%>17eShHe1~hQ@BH?iciutA zH@A-*Gv;LwH@`4&;J|7qbCaL@2j#J=QL?9%lT&{pMVXwYj!8hj#n#>Oq8C`*;8KK#V?Q)6CUe<1a;7g9eQSjsvb+zwf^=(-<#bH|(; zpZ?1=*VNW>$Ew|F1f-_ba^gz5*@&RRq@?7~$>Y@+7HTxvRpzOps?n_!5i&bIzbwBk zn;V?zM&~h}D&H?6M|AGdEfkZJ^<47v-@5gt-WY02!m^&|O=RPHtae;`#ECBLRZ%*^ z2qBM7(i|pr_yf-CZ*D&|XZ=3r3#PvC;lOHL8Qt!=NRZ$B=9x3wwsmzCHfVyon`0WI z8+4eqDJ^;A_$ef#16`qoz>4v33yl8$D$YrpU47D6*q&6ecMnRKODAs?m_az1%e6~~*z(@#G6 zwD0kP%Qkm*EI%7d&z_r(>`~BJyz~3q7ofsqYv$=vdk|x-tCe}z1#>p|OkC!q`jb>8OdUWO7W{EtvD;Po@!QPR$uJf*GHkoib6qUH6WP(Mkj}g1Hxw zDWZ+kCX;2X6lU`)@(@mFaFDyQkYy&ff9|B2gfrIsU<)3Ze1VMjVz4? zp&&6zT2cUdm~>uZtqkxySvc!Ie{zwGy{v*{iSZ*lk4*m?_dYc0hbeZNWk;3+B2kBC zN5z@GeLp?LT*vhXMs@zOvxrbCK21HZc7@bB)D&C)jU}J@otS*?9ASrBIITb5AlVtC zO*KPVwKJ5gDzK{NV89hb&B$Vqg9fu2VG2CzMpiq7OiCik^#C+`H9=cjyMObO-{h7* z_sHM(h|D!oPfU5_;v<93KlHQnKYQpk=QHknFiVx8Y7(S1AeG>8*VUXkJD5UFRWY!7 z;6UXF+Dt}INSi;xrC}C(balVar<^jqJhycXihep47HIZkSOG}T4eztk&EjtqKqe!s z zB&E!jLc}>g;H8BsVZ|z&4+*65IdCvV(jf!`$ZkWkSGD95{#f0Q zOAxAcwnJ;$+h9^Xi4BjSlEk|ymxR6G;XV8X6Us~9dw7ZEp4@}H< zWh9Lgql^_$>)44XVuGlrmoR0iycLe@6Qo<*n zoP08zrLC14(9pzK)g7sBR$`8Y9VlblZoj=x@~jV-W0;bu+gPiDQyA(RhK@FaT+=y0 z)J8x(J&fFS?yg-Q{P*Fm$fjQ%T({wGe|zX}e;f4uBi}bQwL9|BhK;j#?`Bz#kPt_J z*dFdw3gSR0O-oI{b{o#dC_Wbw6nUg5aYw@}=Qq7UnL+84hT80^x^qVjn6dncFJ<* zCSG|>TzPZL%%&L|2OKYCK}DOO5^Q8gl0L`H7KX6Ar~yp~aI&~sBl zcTRAoIzeXLuCJgfY#2-3Smdjd^QnSZg9XU`f+5Oii8_LURAf=~W#j0>G zO`U!1#y4KtcyPn{^MgKO+wkbYsZ8pK>L@NQw)-Ec@Jb1t(F1X^3&kKr2$95N>)jcp z>F8bpS4hRIe&uJovwAXbJI1~5;n_WP_1WR52P4L+x;?v+^&Wc4%G!qJ=a&ucS#CPU z&g#<=$=8=0zVZVN7BS^OlMa^A9WM>(^mn7G8LMg8{g2wXe*L0ZW{$6=$$M%xvuYQz zTR3~_Yp=cb`|}Sy^xDBcE!@Hi<(tIl%INwcl&+S>Dr5*OakFPZV%eUKf}^PZD3Uu; zbP1ySomkzP6;sLjBjIiFJ(=>!*mL#7RHHnZeU9yHZEf7vDO=CBYPE>W;Oq&7kwG&< zX3k80^?62L8R!=l)9RRV%oGAE;#1I3veP~HvDzu+{j`>6Mg(^=FpRuqOW2k?cEe{+ zedAAW96UJSjXTU#L6nZv8X#K5VOnCd&?%VOX%kR&>H-v@5cM!9FVTUJ-({-wBlIhe zTfO?~CnvK|W8u)iN5ggb&g#ZU8705^>L&|7M@7tw0jPu^zE}Xh1zUD+Spe(s*|V>m zdhNBd7jD_TDyd@=6OGW(C`qo__#!ER0bFgEZjB)XF^bUL3EI`sqK?H?glkSkXhCU5o7WOH;rci5m+aet9_gertCBFS^{#%7{kuAkqqfh2~ zWtk=h($k;#)?4@e=kw2Bdg=Q!nBd*iG$gqtx4D^>E?vNJ)#JvE>&Fyvbj(|_`(u<` zI%&)GleQeap1~|3N=G^vE#{b#s3?D;$y}so+o)5%THKV?ubIh-qHm;mJkWqt-Dy5OwP=?rPnWIuyxB) z{RhS^=JFjMmUE?MM;ddwW zCFU7@uEqua#hqa2F3Ka-bQMl{i_S>Jobn5JtoGg=X!iXnZK4!LU zG2fIluJN7u5m+Thf^-CvBT6z>lc3ZCB!d2N+6y2zM19i>-c}}P6 zbW!=tE!H>zPuZ;%Q_?V%5J2RbG#w|^{l;NUcIo&m7`0HItw^rrtXj15maLMPQ%*D# zhL`8&HuJSfT1bxjPKFF=nlWSc(W5I@0@)PS1mPB@p|a+CbmKUk4qpL4o~=EgjZ~5y zX)xlB*DnALN(m`zUDZ*Hjad$$7OpnJ%9r>W`5Z&kzR_)G`dea+g0g6O5ujcJi!x3t zr|XF2xLLNzmZ(w~vZAHeY+WwdD~mbt{RnXiQ7SAUH)M#W6d57s%BgPI{qb(T4S<#3 zKC|<2={!gXqKiY4n4-f>YvA;A`BAP8|1fFdrlL?gZ&w>2EpVa|JXky?q3guQYSXWc zpNUW#A8e3NTBRWo-IutlU5GI923lLJIPRLNi|5~Kc|geJlPv0}#r1Rra#`THD|tv0 zkrBj|E2#jMF8!GDO;*L%_f@*rob$25UH=IBnG@=x_F&#TbnfIp897(yIIwaVtYDk2nKo8`R?Umm)p8O{Rht%3XYES3w9KL5)!UQs z>`Nf@Bu1_OnA;#78@isms>x)$b~a^;5ViQ`b+#C?%Vt;Iqip2l8d9wl5oK0ND1&na2#nS=mF%#||PbUeCpwzkTw}UY|rHE`rhcdWAGI?Zq<43p@BsOv#9tc0ojCq^Kw*%@GyI zWU_n>hj6qIPFy%ETe9loNn3LaAQjw_?}0#S_O3e`V;*xg0K9hg(WOhTXT-mwqm$KE zEHZFvW?t?u2KrfJC|Q6Ju4G}IJMT0z=PD7XDiRje6mizFYV6Wj4dMdSSC1g%CA$PN zUEI?xo-;~DtA(g_h&`$sp+Gz^C(~4(%=*^htYeAYx=$P^CBQYyO+U_@Ki^1qo*ympUV1Nm$tI*~4egW8%usfBqlyRx&Y=f4^ln zBd{6KVpKs-P$B&)*2TZ`k@{el(jY+;m$!EXwR*@1S&@>Okt(qsDQSR&Lkh80OtIw_%A{&eB8KkG9Ap$H$a=*gD!>_(SW4457Qk|i-*O8HP6eSm0c*0fe|8ybcdKKJU3so0((W3lQ*zU;v+st6VA zfV9v6CXl|0yoGn%aYx@fu6_2|XaDpph}W)UUKvp*iDmy1kOnewx*GnwaAV-!HL&;c z-{@+Zj;_6$rJ9D)(b5~lnk)&KaNZWrsJorpAtHz&l}!2h!2k!P@D4Kj{nPwRc>5$LzjG7p`3Sr)y{5v4skfwiU|x zADFjLTug7T*9?YhASAmO+GDRgxjN#I0Fv~$8{ZtKFUFCnie|E=*U-1faE3bQdW!^w zl!t89WJJh5^$lmw!icqo(Wl1Rwu?+gbhAp%t>|=&lzPBeq%M6;cI&&NZ{OV`l6LRd zvha>;WveoSAQ9SiVb@D&M`oHrq3~f|9OK!K$}9dt``I{wRN+ewK`hrYqlD6M`T*!F z)m;P#*^8;b1EpM2no3KUiBAm;XS0VE&U*E!r}B~rsp=S%sY0b>TNaJhBw=7&plFJfgK`tT~s^3N83MZi?sYxr*OhESyYS`$p+l>5=WZR&4GvvAOp#Amc24!t}@s-79vGRvsrm+Zax2?jlP1zR}C3bP#i$p z$gU(%`W_3f=)ZRYX5Tgi3^dp`@3j z(u-!dR7(OjJ{hPR&n{@l87R?F*Rm1vZ36nvIKJNi#>w^Sud*5T{poO1)aj+PAS)@A z1G$-jl;jQko9v;p4kxcjuUVw#8hMi*;-dIbO<8p0+NO@W@yDn3uUYf*3%~s3I57?^ zU36V>afMbEk*xwLLX@&RT*j$G(-0Xw-_zeXboDa@*{Q8!UCP#a^bEC#aY?>TRt;c) z>f6p%BBOfQQn+V=-g0bL{mCi-vH_+aFI&Kv>2c-@6I}=Lty%Mf7k>F6i_T;vsHEEpdt@$XZJ})S4H}7G>^slN}0JF4_+^!QDUs5JW5^JiI&=iD9i|JTVZaC z8tj(y+kYlRqx29t3A0psRJOf6LN^v;sX%Jfm(i)t0N-^!Ek!Cq-s?9#!?K+|m8<0G zXjja3y?CNDAu%T4+zoeR_%fnJ>yWbuYg@xm`!Wcr$iwckM?*H(Xk8hV*BPk}s6h!* zn#Vr4&_(2SNbn!_BASv?p|Kw(!ii(Ofbv$y1qYM)# z`*Pu*UMNQCMjbViRqTH=7r|7lFHX@^-pKffzKguM*h)cedcDg zp1BH9F%~5uBob?=62?Bw&DQ7X1|9oRItf@3o@FBV8n4DhfCX9XMSqU&Y$fqj@Xz z3~QD>Gt78Z5A~a)rO4RGdK7fr-w9M2#se~!fq1n}dy87>t}}Y4MBcBjN$Gm-i!XNU z-?8t7PMK=whntfYE^J!ZG^8TPw>fpQMAS9$my15oUb4^PiYeUKX7ShiCqx{K$q0R# z0zsFu9xygg^T)=X#pqfok`W;pcjJB(h9wz|G)n4957N^S-pM$ml7_ZyzEQE6cS?hHMJ8RdmYS=`PF9+&V!V3 z_g)qJQ8L;X39~#jUm_x!Rj5jiU3;ZrexT!yVOlnJ7?z4+%xAsGk@+}PG2qpu9+AZ8vuYn008)B050bM zdH|X$SE#R0(NI%U)6&w=F|aW*(9<(;vanudH_NTmw)5K_CiB5ET_A<)7@xKl=bmW-1mz z*;`jwVRxy80@>uEGs|d%bsM|E*5d~v@~%NoY3bOnb8vEriro;GfG8*`DXXZe>D|^h zFf=kYv9Yy-+dCkTZtfnQUfw<^^n>7#(6I1`nAm4=@d=4ZS=l+cdHDs;3tyF2U@EJs zvA8!)%`L5M?fADJdwL0d{R4wT#0k>m)R*a**`?(b^6J|9#^%=H(ecUY*|+aM&i`=% z0ib`g{;dCo{SO!O9~T8BC5V#x9~Y1!^v?t_Q&I`aUSYWfqrMx+DkK+8!={^A*4Rxe zEN^`Pb`2V*V;50a5l8+P z&|Jd&xqhlewzE;Ptp$mALApmGS*is~KNEX0PtwOZelDm7JCBX)ZDlT*ZTz9Hc;(XhfPQY}(U+!{BFx+N8LaMk}uNC4xz=i^*sB-F(Wbp|-LBoXNLwfk&e@cgV~q zHXHeL_6omt;H1IT?>4S);)HnTMm2Nl0q5t$^?0=Z&V`<@Ilpz;#2)(;w9-sZLeNnw zSCYO+ypA%o9S!0W5$03@q?ImNBjzMr-K}x)Yg)gb;^fVpRtR^uY;f2Kdwi(*uL0+2 z5NV3^K|>SzqR@z(0ex+yawiN78B;L4XWh=ZAm)1hq zI#-{=d+^x%<)gi*E&;N}VlyA6`qDJ%l4e;VnSy&17f%Y?MvjiTCCIRrcTl3(_&phA znHf9I=xz&|Z{X3d-q+#si~VbcrFr_C)Z3d#T$Pv%v?gu}*&w8S6=})1JTJEtNbHz< zIJKBU=Bg?C9*(BdI(5ixzZMQC$}`?ls}^6T#-f54=!( z4DBh6PqH)_(aMF+3l-1Y6TaXj6NU$_GzObXLq7+^C~lCtx-Zl?ap~BVXoLmFwaBfz z#J8iSJ@Q3AyqVOvJ~fX&!UORxx@WxGBfYRQ%dZi<4iR?H;k>Mlo4?1@Q!4y=NOX-} zD8fiq8C`rCuX!+WUJv|!zy;Q)inEvXTf79&tbB;>|ld8HsMdPt*P|vX&wXG3-=Z$dm0B7#XEL} zSn$vLQSa{c)31drmLe+-3+AzlN%_0{cw6C&AV~Hex^hX{ud>4BtyjCEh6$4+zoJzf zS>X}$RLe+MqH|zYfbXlE+Tgyoc`*P8reh`MZ>>piufS&Z>zrRr5d|v(yIlfBr4e`@ zv+*{{SWcBKA0!dsmRW8-$}vcJ1l&ies&51>dzjd+a;00eYI1*+qFPI2hIDjw_t!m; zpfJ1;K5CHse!pf|wD+ubhK~H3v%%pvUnI2t#iLd&z8a@5aU*f=DfJEv_7b?T2r2kF z*-GcE9>2^YETI{OYrUz!=ibj>T*T-I5CIz;a8u{mfXwbKR}}iXJR>UA5XTm=Ih1 zvJ?|^Za0x9KwgBe_R`$vvZ9rIrwN@dk&}IzQ*ieH-C&c&oiXn#=d3eSz}+qa_Zy2y z6}t8WRuD6$i9J$r7^E)zfjeDCKAOU&J(1M?JBeG~L;osP;ttYE;BnUa)~ghQq@^y%=PHmQkCuuONSr z($pp3lr%oTEX*C$c~Nn?t`QM+inZ05QqB2&_<}qe4l2921Yq=K#eb?$sj$`EH?z$S z&BiN^OdY2VrE^E>MLo00Mc#mPt#2Bo-O+i6NP{eNu{sUxsjX0yzL0HeAyO$sR(N58 zr#>C)q*bts@SJTrb=>09f;Ip0Eju7RH7aDCL=&92?j;h7Z}@OA_kOf;R}~DhkS+cA z(lk+|WKTg`zSl0w@}MT4+C5x@)oGWo)FPvn*`dOp>en19-%Bv1wfnH@Wp}VeROhwu z!h2BR`H?3ticx)&7GAnvpL|K284iW`+4t=&H|Y5dpe5@^_fRW#1b!+=s=n}qz@dnx zV4qU9J(&c845TQ1YfwtM{}SM9X<8WWynKAKByJu+SwdmCs-UQ}$7l=!25pb~Hk=rTNHVeQrRfIH4TqzKZ z9rc<}U7#qrn>C?-`%Vcr)kuRp?PSyEkld;SZWWQjxiD#KrOf+xjJn7&e|5pXCVKh! zMPs_PPBGP}kPOGR{5AnwH+NFxGZp7hg&w$YMD~_6ytI$aFS)yKJ4hwoB&8NwvP4W$HC+KF62J5cF&?qk(2|Jd%qf#m-I&Wd~ zp$((PZjeE%WhYFTHt(8cmpqg_jQ+r{wo+DYv8w$svMH(9M*XgM-;t!b=OLaxU+)_? z|HCT&I$2miQC3m~c+72V^T$cm?BDM?y`2qCwIzht{yM1pt2ysY=JNtPCsmq} zVy$bNfj_f^)W}?NO>zcq{9^P1qJD0D32@;oXABfJ_`WCuJFUFUf&i};-KV}GLY{0P zk(G8Z0Sj!O3m4KbG@k}hHjZIZEVA-VBgNN%F=J@hFdtoWfv50G1+9r;cl^47%iiEx z*$^40(W=|S@HoKbNvKo_sf$n{8BvHX%{VsWVYU%_APN>8s#TdPeKyaC^d5U45>?vQ zWbQl;G&gaK{#bFFbua7^z=exqPE*ntbofHr({f9DXfIJ?#_-wEi&OpY^C;vjzQ|Zm zWXVvZ)MRDf{rYwDkoq7?ev8TZ%$0TUyEHJ&arj8xmwk?6@qo&KWlz%=Wb*#_zV3P^ z5;nZ=L>!;~t_qbmckffhis8eSrP$s(y4CxNIc9ZAxqszOuAFsudEb{KGa9Imx)mVv zb!mDlKD(sZ7G!C$SO{&}W|&%IZ24kVxG;gSCZwa*rY1>bc=7YF?XY&N*r((UhYj#r zN9nLt2;GL{#Lj>^SO2)5uzgQ-;dDoPYCv~;!{cX2zfw6*bM?GYaxqX5ezqCQh{tuH zuGNN9dN%IMAQyB0>Tqf=x-G~pH7dwHl=kNWHGRv77#eWSt_V{ce%0FCsTKe8CiGhY zA7BHzzHM5gIge4b3v5k4P&(a|Djbal`Z)rq_T(=CQ}sT#sD-Ms3^IrD!+e$H;2sI* zQZsDOjFO2!s7pSm zvJS8wlzKgctWnvAemkeby!yOnH>s`q~%EOR7uU)(>I+(3(rYTeYd?qsONO zM+@}yP zoYgL7l{=HXzP*`S%HuuvdOud>Y4@VYw-fZyw&uw7Z1p`t06nwS&L@<+#qQTCBicZM z{!Ze%guI!MH1RqaDML>FVz9Ds!Sdsg_c^Oi=t}azn|uY6R7|(Jt2*DP?Meq4h!fOX zUb$EmSEM#&=`(+oIkdyOGR49*4mqZYe+M~F^_^BUnzmEZ3wAkus|XvhFuw3rHZ@?S zkI8B*ivG2>1FcGBIU5@Z(a#MFES7j9O8Zux#~AE@=0IR$Yr+IpM$rnDuL}1 zFs%2(UIwc9{^9fbIceZdSWUpdt+^*d3kd^Qe#PP>!OW;3R~fX)mu*UrT7>Rp+ir^cV@1lQ=6Ff8^~-(ij152i9nqTP z*9IhQ8(a6Rav#;|!Fe6tZ9C9lU1H9{OdV$EP+wT0J7ae&2(rch*C(uQN5DI<0i?T7 z#bzX@_+`pUoiAGu3A?v-qPM4^=TSbZpr+sc(=`37*+MGXUinLCl6%RY2D|9A4zatt zH#8vdQ-gl&hU95}ctBQGrntkz6Dm7J@Eg*PQ{Rj^<@4K7Fz3^^Aiq+R# z%JHlvCE5Slj`XfiX6hA6LPD!g{Mef50ytlKBtvQU*RORwOFY|jHu{bZ)JzD!#x7i4 zcL|6OL?+y#&EGTHzmsG{|B)O4ucwtV`>{7x5Nxh)b8s;R;$#t;St-LoYn^Y0PxmYY zUes(vv4%bVV%wNKlE9}4?Fx1V?*?zgIA5 zb_sxV3PV)?d@H!S#%Cq%vju#N$R(5GzP~}OB->FJ`0P4==y#r<=a0c)@!-T=mt*%j zu1i4pDknjq1of$^YQe|e+&`S&P+%v5dFyJRZBxJE(D+_ovu6Xl&HMD!m2~8ormyuu zx(qe8wsjk+d#2IpYJ&Mp^pRksj7EwCwhF3LNJ^yiPN41FZpb3A!uL!{VYjH_0Ov5q z&h(q=7Lx*vCu}>WnVsz*F`N_XW>1FQU%bHe!cQHfS+fd+?PkeZ)9^ZWu#Qc=h$HFZ z_fCk+`|1hRWBC}n;*iz+G8{R^+E4)G`vA9U>Xv>#n!_t;UqMx4PG97JDu5|YY5qe< zhm_co)B^$X#f}O%H|$u77JHCiU;k(`fqL~0)y)sXNuOAcOOdaMy9szrD)dpo^jOJX ze`{-Q)Y7M#y@>Cx15fNAoKm*DU!qOnA%Hq_78*}dneqF*2)Ij~Id`!IFl7~2ekkO* zla40dld9b*KXTJCA!k4cq%}z@PDQ>P%spXBx1`7=dd~YF>&qLVuDLrqXKCe6^#k)t z=zNP|`_6;&QFNPb?LY1Mb4I_mEk)neVQ-4{-3lTT$W+gZi*Rn&Y}U7`8>WcIb{SI2+lxgCIV z#LoI!)vCcwAY=rGm#PNLCYN(l{{fmkq>*7_=!y3${CEIYB-E`ZwawbFOVpALhSXcu z#WwD-qnWG9-HPC1*y_<^@h)ERS4kad6dUIerZPoGvTmcn^q=X(YvMmT^;@&*v&mU8 zq3!lU{nLGOImt{XFcU{6^}L7Hvdc;0r5}6SG%Q!>R(h4(G$KpSzZ92TSAaRC2c0u+ z6O0+(4vG(M1?sbX?ej-hc77IUAzo~d{pC5O(%w&w&^okE47^IRnxy0%5KBd8$l7_o zYD?>u4IEW9RDjv))Zz>w5L1qF-2F@2IA4JB5KC6KD4MD5MD5MD3NB2OC3OC3PD4QE5T>1Y?2b@4nB5}E6ŒG8šG9¥E7²F9ºF9¿E8ÆF;ÉF>ËF?ÌG@ÌG@íCNíCLíCLíDKíDIïBFñ>Bõ@â?@×?<Ñ=;µ@.µ@.µ@.´?-´?-³@-²?-°?-­@,ªA.¦A-¢B,A*›A)˜@*—A*’?/’?/’?/‘>,‘>,’<+’<+’<+”?+”?+”=*”=*”=*•>+–?+—@,”?:•>7—=4Ÿ?1©B3³D3¼D3¿D4º?/¶@2­E8žH;‡H9mB2T8*D3#:659549547326216005//50-72/72/72/61-61-50,50,50,.0-.0-.0-//-//-0/-2.-3--5,-4+,4*+4(*7(+=.1E69LUPdUPdUPd0/-0/-10.10.40-51.62/72.83/83/83/:3-:3-:3-:3-:3-91.91.80-80-80-80-91.91.80-80-80-80-80-80-80-80-6.+6.+5-*5-*5-*4,)4,)4,)5-*5-*5-*5-*5-*5-*5-*5-*/,%0-&0-&1.'2/(30)41*41*63,63,74-74-85.96/:70:70@:.A;/C=1E?3H@3IA4JB5JC3LC4LC4KB3MA1MA1NB2OC3PD4P>0U?1^A3jC4xD6†D4“D5žB3¨B3°@2¶@4¼B7ÂC:ÄE<ÆF=ÇG>èAKèAIèCIêDHíDGïBDó@D÷>Cø;Aø9@ö9?ð.‘>.‘>,=+’<+’<+”>-“>*“>*”=*”=*•>+–?,—@-“@8•>5˜>3Ÿ?1«A3µD4½D3ÁC4¼A2¸B6­E8œI;…G:kA3S9*D4$<66;55:4493382271161.61.72/72/72/61-61-50,50,50,.0-.0-.0-//-//-0/-2.-2.-3--5,-4*+4(*5)+<-0C47I:=h<;vDC†JI’LJST§`h¨k{rŽ‘{¢„°|†»y†½lv«[\ŒQHsQBkOFaOFaNI_RN_[Yfnotƒ‡ˆ”™•™ž—š ”™‘ƒ~ojk[]\JVUCXQaXQaXQa/.,/.,0/-10.40-40-51.51.72.72.72.92,92,92,92,92,91.80-7/,7/,7/,7/,80-91.80-80-80-80-80-80-80-80-6.+5-*5-*5-*4,)4,)4,)4,)5-*5-*5-*5-*5-*5-*5-*5-*1.'1.'2/(30)30)41*41*52+63,63,63,74-85.96/96/:70?9-@:.B<0D>2G?4H@3H@3H@3I@1I@1I@1K?1K?/L@0MA1NB2MA1QA2YB2dC2qC3|C2‰A2“@0™<+ :+©;,¯>0¶@4¼C8¿F=ÀG>à?Eá@FãBGæCFêDFðCEõADù?Dú;@û:?÷:@ñ=@è@@ÜA=Ñ@;É>7³@-³@-³@-²?,²?,²?-¯>,®?,ª?-©@-¥@,¡A+A,˜@*—A*–@)’?/‘>.‘>.‘>.=+=+=+’<+“=,“=,’<+’=)“>*“>*”?+•@,”B7–?5š>3£>2­A4¹C5¿D5ÂC4ÂD6ºF9¯I=›I=‚F;gA4P:,B6&=77=77<66:4493383072/72/62/62/62/52-52-41,41,41,,1-,1-.0-.0-//-//-0/-2.-5//4..5,-4*+4*+9-/>24C79_83l?:|E@ˆIB’NK›Z^œft”n‡Œwž€~¯zƒºs¹dm¤UU‰NEtO?lMBbPEcQHcMH^NK\[[estx…‰ˆ‡Œ†Š†…†Š|xzlghXZ[KVTEZT`ZT`ZT`.-+/.,/.,0/-10.40-40-40-51.61-61-61-81+81+81+81+50-50-4/,4/,4/,4/,50-50-61.61.61.61.61.61.61.61.3.+3.+3.+2-*2-*2-*1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,30+30+30+41,41,52-52-52-52-52-63.74/850850961961>8,?9-@:.B<0E=2E=2F>1F>1G=1G>/F=.I=/I=/J>0L@0L@0JD4NE4TD4^D3hE2sB1~A/‡>-Œ9'”9'9)£<-¬@3³E8·I<ºJ>Ù@CÚACÝCEâDEçCDîACô@Cø>Aü;@û:?÷:>ð=@åA?ÚB=ËA7Ã>5°@,°@,°@,°?-¯>,¯>,®?,¬>-ª?-¦?,£@-Ÿ@,œ@+˜@*–@)”@(‘>.‘>.‘>.=-=-=-<*<*=+=+<*<*=+“=,”>-”>-”B6–?5›?2¦@2²B4½C6ÂB5ÄB5ÄF:½H>­K@˜J@|F:aA4K;.?9+@86@86?75>64:5294183073062/62/62/32.32-21,21,21,-2.-2.-2./1./1.00.00.10.5106005//5,-4+,6,-:01>45W6-b<3qA7}D9„H@ŒRQŽ_i‹iƒs˜|z¬u~·myµ^g¢RQŠMDyM?rN@dPEgQFfLC^GBVNLZ^^fjnquzvx}vz€vwzokoa`bUWYKTUG]V^]V^]V^.-+.-+.-+/.,0/-10.3/,40-3/,4/+4/+4/+4/+6/)6/)6/)4/,4/,3.+3.+3.+3.+4/,4/,50-50-50-50-50-50-50-50-3.+3.+2-*2-*2-*1,)1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,41,41,41,41,41,52-52-52-52-52-63.63.74/850961961<5+=6,?8.@9/B:/C;0C;0C;.D:.D:.D:.G;-H<.I=/J>0K?1GH6KH7PG6XG5aF3jD1uB/|?,‚;)‹:'’;(š=,£B2«G7±K<´M>ÒDBÔDCØDBÝEBâC@ê@@ð>>÷:>û:=ú9<õ;>í?>áB>ÓC:ÅA5º?0¯@-®?,®?,®?,­>+­>+¬>-ª?-¨?,¤?-¢?,ž?+š?*–?+”?*“>)?.?.>->->-Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,<,=-‘>.‘>.”B4—A4@1ª@3¶B5ÁC7ÆA8Å@7ÁB;¸G?©KCJ@uE;Y>3C9-78*@86@86?75>64=53:5294173062/43/43/32.23.12-12,12,,2.-2.-2.-2./1./1.00.00.3205105104..2,,4+,7./901P5*Y9,e>/n@1tB7|KGƒYcƒg~p—xx¬s{¹js¶]e¦TT”OG‚LAyPAjPAhMAeJA`GBYHEXKKWMPU^bc`fbcha`f\Z`TWZOUYKWYL`WZ`WZ`WZ,,,,,,---.-+/.,0/-10.3/,2.+2.+3.*3.*3.*3.*3.*3.*3.+3.+2-*1,)1,)2-*3.+3.+3.+3.+3.+3.+3.+3.+3.+3.+2-*2-*2-*2-*1,)1,)1,)0+(3.+3.+3.+3.+3.+3.+3.+3.+41,41,41,41,41,41,41,41,41,52-52-63.74/850850850;4*<5+=6,>7-@7.A8/A9.A9.C9/C9-C9-F:.G;/H<.J>0K?1FI8GH6MH5TG6[F3dC0lA.t?-{<*‚;)Š;*“=,šA1£F5ªJ:­M=ÉE@ËFAÑFAÖE@ÞC?å@>í==ó9<ø:<÷9;ó;=ë?=ÝB=ÌD8¼A2±>,«@,«@,¬?+¬>-¬>-©>,©>,¨>.¥>-¢?, ?,›>,—?+•>*“>)‘?)>->->->-Ž=,Ž=,Ž=,<+Ž=,<+‹<+‹<+‹<+Œ=.>/Ž?0’C2—A2 @2­A5»B9ÃC:Ç@:Å@9»@9³H@¥NGNEoG=R@4?;039-A75A75@64>63<4194083/74/63.43.34/23.13.02-02-02--3/-3/-3/.3/.3/02/02/11/11/32032040/2.-1-,4..5//H4)M5)X8+a<,f>2nGBzYb‚lƒ€uŸ{|´u|Àmu¾bi±[[¡SLLBQAnN?jI=cH>`HB^FCX@BO2K?3DG6EF6KE5PD4VC2^C2e@.m>,v=,|;)ƒ:)Š;*“=.›B2¢F7¦I:¿D<ÂF>ÇG>ÏF>ØE>âC?ì@>ó<>õ9:ó9:ï;<å@<×B;ÆD6´A/¨=)©@-©@-©@-¨?,¨?,¨>.§=-¥>-£>, ?.ž?-š?,—>,“>*‘?*>)>->->-Œ=,Œ=,Œ=,‹<-‹<-‹<-‹<-‰<,‰<,Š=-‹=0‹=0Œ>1‘D2–C1¡A3®B6¼C:ÅA<ÇB=ÃB=»EA³PJ¥XPŽZOqSIVI@BD97A6A83@72?61=60<4194083/63.43.43.34.13.13.02-.3-.3--3/-3/-3/.3/.3/.3/02/02/00.11/22021/0/-/.,2.-3/.?0)C1'K3'T8,Z<2dGCw]hƒsˆ­„„À|ƒËszÈkq¿ed°VSšJC‡N>kK5.>5.>5.>5,B8/B8/C9/E8/G:1I<3J=4K?3EC6FB6IC5NB4TA3\@2b>0h=-q<.w9*}8)…7*Œ:,•=/›B2 D5µE9¸F;ÀG<ÈH=ÒH>ßF@èC?ð@@î:9î:9é=;àA;ÑD:¾E4¬A-¢?(¦A-¦A-¥@.¥@.¦?.¥>-¤?-¤>/¢>.Ÿ@.œ?.˜?-•>+‘?*>)>+>->->-Œ=,Œ=.Š=-Š=-Š=-Š1‹?2‘D2–C1¢B4®B6¼C;ÄC>ÄC>¾D?»PJ²[T¥e\‘f]s_TYUJFNC>KA@70@72>71=6094.83-63,63.43.34.34.13.13..3-.3-.3--3/-3/-3/.3/.3/.3/.3/02/.0-00.22022000.0/-0/-10.8,,;,)B1*K7.S<4^IHtbn‡z–Š¸‹Ê‚ˆÒy€ÐrwÈik¸XV¡GD‹I^C@[ABV>DP>EMGQSKWUQ^WU`XS_UR^TT^SV`UaZHaZHaZH,-/,-/------------.-+.-+/.,/.,1-*0,)0,)0,)/+(0+'/+*/+*/+*/+*/+*/+*/+*0,+/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+1-,1-,2.-1-,1-,1-,1-,1-,1-,1-,1-,0,)1-*2.+3/,3/,3/,3/,3/,3/,3/,3/,3/,40-51.62/73081+92,:3-;4.=4/>5.>5.>5.?4.?5,@6-C6.D7.F90G:1H;2F?5H@5J@6N@5R>3W<1\:0a7+k9.t8-|8+…9,;/“=0˜?1›?2¨@3¬B5´D8¾E:ÊG=ÕF>ßD?çB>ë?=íA?çD?ÜE>ÉC8¶C1§B.¡B,¢A.¡@-¢?,¢?,¡=-¡=-¢>. ?.œ<,š=,˜=+•>-“=,=+Ž=*Œ>*‹<+‹<+‹<+‰<,‰<,‰<,‡;-‡;-‰=/†½F@¾C>¾DA»KG·XR¯f]£qfth|rfik^S_SCSHQJBLE=D=5<8/95,74-63,33+43.34.23-13.02--2,,1+,1+-2.-2.-2.-2.-2.-2./1./1.02/02/11/11/11/11/11/11/5*2;/3A32C4/J;6]OOymy‹…Ÿ’‘½”–Ӑ”Ý‚‰×tzÈjn¸_b©YZPHmHBdA>]>>X?AVBHVLU^U`bbqnn}xv†|p€ulyoguh_k_T`Ta[Eb\Fc]G,-/,-/,-/,-/---------.-+/.,.-+.-+0,)/+(/+(/+(/+(.*).*).*).*)/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+0,+1-,1-,1-,1-,1-,1-,1-,1-,1-,1-,0,)0,)1-*2.+3/,3/,2.+2.+2.+2.+2.+2.+3/,40-51.62/80-91.:2/;30=4/>50>50=4-?4.?4.?4.B5-C6.E80G:2H;3H>5J=5L=6O>6Q=4V;2Z90_7/h8.p7.y6-‚8-‰9.’;1–<1š>1¢@3¦A5ªB5³E8¾E:ÉF<ÔE=ÜC=âC?ãD@ßF@ÕF>ÄF8±C2£B/›C-ŸB0 A/Ÿ@.ž?-ž?-Ÿ>-ž>.ž>.š=,™=.–=-“=,=+>-Œ=,‹>,Š=+Š=+‰<,‰<,‰<,‡;-‡;-…<-†4†@6‡A7ˆB8‘H7•F7£G:±I@¹HB¹FAºJFµTM²dZªreŸ~op~|mlteYgZJZOPLAKI=EC7@>2=:1:7.44*11)23+23-12,/1,/1,.0+.0+.0-/1./1./1./1./1./1./1./1.02/11/11/11/11/11/11/11/5*:9-9<15?53H?:^VTxszŠˆž‘“º”—ΐ•×„‹ÓxÆpyºkt¯en¥__yXZsSUjRWjU]j\gmguvr‚v‡€‘‡ƒ•‰}v†yp€sfteXfW_YA`ZBb\D,-/,-/,-/,-/,-/---------.-+.-+.-+-,*/+(.*'.*'.*'.*+.*+.*+.*+-)*-)*-)*-)*/+,/+,/+,/+,/+,/+,/+,/+,.*+.*+/+,/+,/+,0,-0,-0,-0,-0,-0,-1-.1-.1-.1-.1-.0,+0,+1-,2.-2.-2.-2.-1-,1-,1-,1-,1-,2.-3/.40/51080-91.:2/;30=31=31=4/=4/?40?4.?4.A4.C60D7/F91G:2H;5J;6K<7N=6P;6S:5V72[60c60k6.t5,}7/‡9/Ž:0”<0˜<1œ@3ž@4¢@3§A3±C6¼C8ÇD:ÎC<ÖF>ÚG@×HBÍH?¾E:­C3ŸB0™B.B/œA.›@-›>-›>-›>-›>-œ?0˜<-–=-”=,“=.>-Œ=,Š=+Š=+‰<*‰<,‰<,‡;+‡;+…<-„;,ƒ;-„<0‚<0‚<2‚>3ƒ?4…A8†C:‡D;“K<–H; H>­JDµIF´KG´SM¯_V®rg¥qœz{Šwr€ocqbVdWPQCMN@HI;DD8@@4::055+/0(01)01+/0*/0+./*./*//-//-//-//-//-//-//-//-//-//-00.00.00.00.00.00.00.00.6*>6+;8.6;63HE>_^Yyz|Šœ“²’–ÃŽ•Ë„Æ}ˆ¾{‰¸|‹´|Œ°ˆ—yƒq~‡o|‚n}€o‚€yŽ‡ƒ™‹¡”‘¨˜¦”ˆŠƒ–ƒ|{j{iXiW\V<^X>`Z@-.0-.0-.0-.0-.0-.0......---.-+-,*-,*,+).*'.*'.*',*++)*+)*+)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+-+,-+,-+,-+,.,-.,-.,-.,-/-./-./-./+*0,+1-,1-,1-,1-,0,+0,+0,+0,+0,+0,+1-,2.-3/.40/91/:20;31<42=31=31=31=31>3/>3/>3/@3-A4.C60D71E82G83H94I:5L:6M:6N94Q83T50^72e60o6/x8/ƒ90Š:/’;1•=1™?4™?4›?2@1¥A2­C5¸D7ÀD:ÉF<ÌG>ÌIAÄH>¶F:©C4B0—B.˜A.˜A.˜?-—>,™>,™=.™=.™=.•<,”<.“=.=-Ž<.Š=-Š=-ˆ<,ˆ;)ˆ;+‡;+‡;+„;,„;,ƒ;-‚:,;/€<1€<1>5ƒ@7ƒC:…E<†F=’M>•I<œH>¨IC¯LG¯PL¯\Tªj^§€o y˜š‚Žœƒ„–€z‹ym{lam_UYHQUDKO@EI:@D6;=057,13(01)/0*/.).-).-).-+/.,0/-/.,/.,/.,/.,/.,/.,/.,/.,0/-0/-0/-0/-0/-0/-0/-0/-8*A6):3-1961HJ=bfX{€y‰‘“Œ“£–²Œ”¸ƒ³±…™²¤¶ªµ•§§¤£Œ ž‡ž–‚™}˜‰œ‹ˆ£”°š–²›”­—‹£‹…›†’~k|iUfSXT7ZV9^Z=+/2+/2-.0-.0-.0-.0-.0...------.-+-,*-,*,+),+),+),*+,*+,*++)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*++)*+)*+)*,*+-+,-+,.,-.,-/-./-./-./+*0,+0,+0,+0,+0,+/+*.*)/+*/+*/+*/+*0,+1-,3/.40/91/:20;31<42=32=32<20<20=20=2.=2.?1.@2/A4.B5/C60D63C84D95G96G96H94K84N51V72_60h70r7/}:1†<1=2>2˜?7—?5—?5—?3šA3£C5ªD6³E8ºE;¿F=ÀG>»F=°D8¤B5™@0–@/–A-–A-–?,•>+•<,•<,–=-–=/”<.’<-=-Ž<.‹<-‰<,ˆ<,ˆ<,‡;+†:*†:*†:*ƒ:+‚:+‚:,€:.;0€<1€=4?6‚B9ƒD;†G@‡HALA’H?˜HA¤KGªOLªWQªf]¥wh¡Œw˜›€’¥‰Š¤‡„ž…|’}t‚qlte\eRV_LMVCEL0-?1.@2/A30A30?61@72@93A96A96B94E74G51O61W6/a6/j8/u9.€0•>7•>5“?5’@4•B4™C4ŸC4¥D4ªB5²C8´E:±E;©C7 @4˜?1•?2“A,’?-“=,“=,“<+“<+”<.”<.“;-’E5:@29<134,22*1.)/+(/*'0**3*+4+,1++1++1++1++1++1++1++0,+1-,1-,1-,1-,1-,1-,1-,/.,;(;5(23+(56$CL-\hDt„`…”wŽ›‰’ž”Ÿšž–¥—•µ¡Æ¤¦Ð¨¥É¯¦Ê°§Ë¯¢Éª—¿‹³ˆ°‹³ŽŽ²Ž²¬Š„¢€€™{wŽrdx]MaHQQ5QQ5RR6,03,03,03,03./1./1./1./1/////////0/-/.,/.,.-+.-+/-..,-.,--+,,*++)*+)**()+)*+)*+)*+)*+)*+)*+)*+)*+)*+)*+)**()*()*())'()'(+)*+)*,*+-+,.,-.,-/-./-./+*/+*/+*/+*/+*.*)-)(,('0,+0,+0,+0,+1-,2.-40/40/:12;23;23<34=32<21<21;10<1/<1/<1/=/,>0->0-?1.@2/;60;62;83<94=:5=:5?82A60F5.O4-W5+b6+n8,x:-<,„<.’:6‘<5=5Ž@4A4‘B3•B2™@0Ÿ?1¦@4ªB7ªB9¥@6?5—=2•?2‘@-’?-‘>,’<+‘;*‘;,“;-“;-‘;,<.;-‹<-‰;.‡;-„;,„;,…9)…9)…9)‚9*‚9*9+~8,}9,=1€=4€@7B9„E>…HCˆKFŠMHŒIAŽGA˜JF¢SOª\X«h`©{n£Žy—Ž©ˆ…¯‹«ˆ~£„€˜€‹w{nixacr[ZhQP]IIUACL;>D60-?1.?1.96/:729839839:4:94;83>71A2+I2*S2)^4(j6)s8*|:*~;+84:5=4Œ@3‹B3A1@/”>-˜<-Ÿ=0¥@4¦A7¢@7œ>4—=4•=3‘@-?,=+<*‘;*‘;,‘;,’<-‘;.<.;-Š;,ˆ:-‡;-„;,„;,…9)…9)‚9(‚9*9*€8*~8,}9,€>2?5€@7‚C<ƒG?†IDˆMGŠOIŒICHD˜MJ¥UT¬a^­ng«s¤•€–¡ƒŠ¬‰‚°‹|«‡|£„™y‚ql{dgv__nWXeQP\HIRAAG9=@579.66.41,1,)1)'2()3)*4*+2)*2)*2)*2)*2)*2)*2)*0**1++1++1++0,+0,+0,+0,+0,+:&27(+4."47=HRb1l~J€’b‰™rŽ|Ÿ‚ŠŸ~Š§{·€˜Æ…œÎ…œÉ¢šÉŸ™Èž”׉¸Š®€‚°‹¶ˆ‚¬~ˆ¯ƒ‡ª€~œvuml„dZnRG[?IL/GJ-DG*/0*/0*/0*01+01+01+21,21,32-63.63.63.52-50,4/+4/+8.,7/,6.+5-+4,*2-*1++0,-0,-.,/--/-,1,+0*+/)*.()./(0/(//(//(//(//)-.)-.*+/+,-,*-,(.-).-)-.(./)./)--/--/---.../-.0/-2.+3.+2-)4,)5.(7.)8/(;0*;1(<2)<5+=4+>5.>5.>5.=4-<3.<1-=2.<1-<1/;0.=/.>0/>0/?11H-&C1';5)2:++=-(=.-;.45-?-+H()R%(X((Z.+Z8.[A2\G6wC-{B.„C1A3’?1•;0–:/”8+“;-‘>.‘B1‘D0‘D0B.?,<*Ÿ63›83”:2Œ<1…@1B0|A/|A/‚C2„A1ˆ>1‰=0‰;/ˆ:.‡9-‡9-v:/|@5u=0n9)s@/s@/t<+{@0{<-ƒ?4ˆD9‹H?ˆLA„NBQC€RC—HK•TRd]…ue{…lw’sz|€£ƒ‰¦ˆŽ¥‰’¤Œ‘¥Œ‡¤ˆy¢‚kŸ{awhŽea†]\zV[sS]mR[cLVTEPH=J;6G53B,/=&,:#+:#-9#/8".#/-#-,$-,&*+))+-(.1'/2'/4'06&14'14'13'32(32(30(3.)-0,-0,)//'=>0WZErx\‹gœs‹žpŒ¢qŒ§r‹¨r‰ªs³{›¾†£¿Ž ¾Œ›¹‡’²€‹­{†ªz„ª{…ª~„§}…¥€€ž|z“vr‰oi{e[jWLZIKO@CG8>B3/0*01+01+01+12,12,21,32-43.63.74/74/63.61-50,50,7/,7/,6.+6.,5-+2-*1++0,+0,-/-./-0--/-,1+*/)*.()-/(//(//(//(//)-/)-.*+.*+/+*-,*.-).-)/.*./)./)./)..0....../-./.,/.,1-*3.+3.*5.(6/)8/(90);0*<2)=3*>5,>5,>5.>5.>5.=4-<3,=2.=2.<1-;0.;0.;0.=/.>0/?10F/'D0)A3*=4+96-85.83-<1-?-+D*)K)(P*'U.)[4-_:1c?3s@+xA-€A0‰?2‘?4”;3”:1“;19.‹<-Š>.ŠA0‹B1B/ŽA/@/š93—:3’;2‹=1„?0‚@0@/?/„A1†>0‰=0‰;/‡;.„:-‚:,‚:,w9.x<1s9-n9)r?.s>.q9*u:,}=1„@5‰E:‹H?‰K@†MB„PCQC›DJ›QR–d]vfƒ‡p}”w~ ƒ¦…ˆ§ˆŽ§Š’¦‹“¥Œ£‰‚Ÿƒwœ}o˜xa•g\`VƒZU}XWyXWpSPbJKVECI;@A998340-0,+/+,.)--(,*,+)+***,+),-(,/)-2(03(03(02(02(10)1/*1-*1,+3,+32-12./0,)--%9:,TWBox[€‹i‡–o†™l†žnˆ£p†¤p„¥pŠ­w“¶€›¹‡˜¶„“³Œ®{†«xƒ§w‚¨yƒ¨|ƒ¦|„¤{x’uqˆnh{eYjWL[HGK<@D5:>/12,12,12,12,23-23-43.43.54/74/85085085083/72.61-80-80-7/,6.,6.,3.+2,,1-,1-./-.0.1..0--/,+0+*/*).1'//(//(//)-/)-/)-.*+.*+0,+0,+/.*/.*/.*0/*/0*/0*/////////0./0/-1-,1-*2-)4/+70*90+:1*<1+=3*>4+?5,?6-?6-@7.@70?6/>5.=4->3/=2.<1-;0.;0.;0.;0.<1/=20C2*E0+H/+L,-N+/M*.J*/E+.A-,@.*@/(C/(M/'Y0*d1-j30i;+o;-w;0=4‰<4Ž;5Ž94:4‹;2‡=2†>2…@1†A2‰A3ŒB5C6‘=2=1Œ>1Š>0†>/…=.…=.†=.ˆ<.‰;.ˆ:-‡9,„;,€;+~=+z=*}=3z<1v:/u;-x@1x@1v<.v;-?3„B6ŠF=‹H?ŠJA‡KA‡NC†PDDHQQšc^’ug‰„n‘t~}€¥ƒ„©‡ˆª‰©Œ“§Œ‘£‰‹ƒ„˜€”{a›k[•eXaV‰`W…`W]QtVMiPC[E=RA6F9/<2*5-&1+%.)$-(1&*1&*1&*1&*1&*1(-2).1+//*0-+0,+0+,0),1(-1&.1&.14.24.0.*'**"66*PUAmv[~‰i€k~“h™jƒŸn€ n~ m€¥q‡¬xŽ®|‹­zˆªw„©v§t€¦u¦w€¥y¤y€¢}}›yw’sp‡mh{eYkUL[HEG:=?28:-23-23-34.34.34.45/54/54/650961961:72:72:51940940:2/91.91.80-7/-4/,4/,3/.3/.3/01/01/00.1..0--/,,.2).2).2).0*.0*,0*,0*,/+*1-,1-*0/+0/+10+10+10+10+11111100010.10.2.+2.+3.*91.92,;2+<3,>4+@6-@6-A7.A8/A8/B90A8/A81@70>5.?4.=2.=2.<1-;0.;0.<1/=20=20?5,E2.O-.W(0]#/\"0W#/L'.C/.:3-55);5)E1(U.'c+*l*+e;/j;1s=3}<6…;8‰;9Š;7ˆ:6‰>9†?9…B9ƒC9…B9†B9‡A9‰@7†B/†B/‡@.‡@.‡>-ˆ<,‰:+‹9+‹8*‹8*ˆ9*…9)€<)z=(w?(t@(ƒ=3{7,x8,z3/>3/=2.=2.=20=20>31>31>7/C41O/2Y*2_%3`#2Y%1N+1B3077-39+68*?5)N1)]-)e+)c;3h<3r=7z=:‚<<†<=‡;;…;:‚;9>8€A:C;‚C<ƒB<…@9„?8E/D/C.ƒ@-†=,‰<,‹9+Œ9+Œ6)Š7)†9)‚;)~=)w?(sA(qB(…6/|/'8/ƒ?4w5)s5*}A6}C7E9G<ƒI>„J?…K@‡LDŠOGŒSJycL~hSoYu]}bˆi„•u‚ |¥~|©€~¬…­†€ª„¥€|ž}{˜yn}ŽlyŒlwŒkwŒmt‰joƒgl~dbqZ[hTSZHIK=B@4=6,8/&5+":&(8%'6&'2&&0(&-)(++)).*'+*&,*&,*'+*'+,)*,**,**,-#$2*(50,85,BC5UZFfpWn}^tˆcqŠbt‘ex˜iw›ks™hs›iwŸmz¢mx lwŸkv¡ly£q{¥u{¥w|£wxžuzœww–tqŽom†hd{_WkPJ^CFB9>:195,560560671671782782872872983<94=:5>;6>;6?:6>95>95?74?74>63=52;62:5294194184184195484373243132021/6-.6-.6-.6-.6-.4..4/,4/,40-40-40-52-32-32-43.43.431431542540841850940:5/=60?6/@7.B8/C9/F90G:1H;2F<3F<3F<3F<3E;2C90B71A60@5/@51>50=4/=4/>42?53?53=82A64I35Q16V.6U-5R/5J22A62::08<.9;-?9)H6*P4)U3)]2+c4.k62t76}77‚89ƒ7978}75{:6|=8{?7@9ƒ@:…@;†?;|E0}D0€C0‚A/…=.‡;-‰:-ˆ9,‡8+…9+‚:+<+{>+x?+uA+tB+‹2,‹2,¡LE§XQŠA8|90‚F;€J>yH:zJ<{M@|NA~NB‚PE‡UJYN_uNgwRtzX€{^Š|b“i›s›—|™zˆ |ƒ¨¬ƒ|¬‚x¨~t£yq vŠpˆo†nƒŽp€p}px‹ms‡kk~bgu\_iQWZGPM0%:,+7,*5+)1,(-,'+.').((/().(+-*,,*/+*3)*6',7&,9&,2)$<3,E>4JF:QR@]bLgqVizXmƒ]j…\j‰]p‘bq•eo•do—eršhu krhq›itžlx¢rz¤vy¢vyŸvvštw™tu”rokj…fc|^UlOJ^BHA9@91;4,671782782782893893983:94:94=:5>;6?<7?<7@;7@;7@;7B:7B:7A96@85=84=84<73<73<74<74<74;74:6395284173080.80.80.80.80.80.61.61.61-52-52-52-63.63.54/54/540540651952:72=84=82@93?80A8/C90D:0E;1H;2I=1I=1H>4H>4H>4G=4F<3D:1B8/A60B71@70@72?61?61@72@72A83=84@85B86D97E:8G96G96E:4C90B90B:/B:-D;,F:*H;*H;*].&b0)n3/x73ƒ98‰;;Š<<‰>;‹A>†A<?6}=4~;3‚;5ˆ=8Œ>:~C3€B3€A2ƒ?2ƒ=1„<0ƒ;/;/;.|=.{=.|>/|>/|>/}>/}>/—.*£;8ÎkfÙ~y­ZTŒC<ˆLAN@tJ:qM=pQ?qR@tSB{VD‚[J‰_OUOe€Uz~[‘y_¥ra³of»rk»xo¶…vªz ›~•£€Œ¦ƒ¦~}¢yyŸvŒr‹rˆ‘r„“r€•t|–sv”ps’pl‹ig„eby\\lQU_GMP;ED0A<)>3-<3,92*41(01).1(+1'+0)/0*2/*6,*:*+@'+D%+G$+H#+A7+LC4WP@[XE`bLgmQiwVj{Wl‚[g‚Wf†WjŽ^n”an”an–bršfržko›hnšiqœnw¡sy¢vxžuu›ts—su—ts’pn‹li„cb{[TmMH`@MD=E<5@707827828938938939:4:94:94;:5>;6?<7@=8@=8A<8A<8A<8A<8A<8A<8@;7?:6>95>95=84>95>95>95>95=84<73:51940:0.:0.:0.91.91.91.91.72.61-61-63.63.63.74/74/74/540651961;83<94?:4@;5B;3A8/B90C9/E;1H<0I=1J>2K=2K>5K>5J=4J=4F<3E;2C90B8/B92B92A81@72@72@93A:4A:4?74>95=<7>?7?@8@@6D@5J=4J70N5.Q6-Q6+O8*M:+I<)H=)l3(r6,~;3‰@:•DA›HDŸJGŸLH QJ—MDD;„;2‚8-…7-Œ91;4…?7…?7†=6…<5ƒ=5€=4|>3y?3vA3uA3uA3y?3}=3ƒ:3‡83Š73Ÿ%$´<;í{zþ•’Åhc–G@‰K@wI:mNfW@jX@r\E}aL„eQj{O{{U™w\´l`Ì^_ÚR\áM[àO^êmuÜxx΅~¿€²–€§—}ž•x˜“u•Žr”r‘‘u”u‡–u—s{–sx–rq‘lp‹hiadtW]gLVX@LJ3GB.L40H3.D3,?2*:1(70&40'40'81):/+?-+C++H(+M%-O$-Q#-PE1[P:d^FgfJilOnuTm{Wl~Vk„Zg„Vg‡Vm]p•ap—br™dvhrœlo™km—ip™mwtyŸxw›wt–us•tu”tsqoŠki„cb{[TmMGa>SJCKB;F=69:49:49:49:49:4:;5=<7=<7=<7?<7@=8@=8A>9C>:D?;D?;E@8C>8D=7B;5B;5B;5B;5B;5B;5A:4A:4A83A83A83@72@72>71>71>71<71<71;60:5/85085074/74/761961961:72<71=82A:2B;1C:1E;1F<2J>2K?3L@2N@3N@3M@7M@7L?6K>5I<3F<2E;2E;2B90A81A81?80?80?82@93@93<5/LE?IB:E<5OB:K:2J3+\>6Z5-`5.`4+^/'\0%b8,g@1gB2‹I;G;–I?žLAŸF>›>7š=6žD;¥ND£QE¨VH«YK£PBš@5˜:0ž=4’9;9:Œ67†54„96ƒ@:{@8o?3oC6lB4m?2u:274Œ35’-3–(1ÏEEèbaÅEDÍWUáyv«VO†F<‚WGlS=f\CedFgfHgbEm_DyeL†nVŽdK­p]ÍphÞW]å8Kð(Dü&Hþ+Lþd02b22\31L)'D'#I2,J70F5.E2,E0+H0.I-,I)*O+-V24VK/`W:f_BgdEkoLu}Xu„]oWj„WlˆXnŽ]q“`s•bu˜bušdv›eq–ks˜ms˜oq•os•rw™xz™zy–zx•yqŽrm‡jj„ghƒdazZTnKIc@TKBSJAPG>9:49:49:49:4:;5;<6>=8?>9>=8@=8A>9A>9B?:D?;D?;D?;FA;E@:E@:E@:D?9D?9E>8E>8E>8E>6E>6D=5C<4D;4D;4C:3B92B92B92B92A81A81@91@93>71<71;60;60:5/85.74-74-96196/96/;60<8/>:1A:0C:1C;0E;1G=1J>0L@2M?2NA1NA1N@5N@5M?6J=4I<3H;2E;1E;2C:1B90A81@91@91@91?;2?;2C:3G81I0,V..j68u99{;;†ECƒD?„H@…I?†G>ŽJA›NH£PL¥MK’E3”C2šB4 B6 >36-7+¡<0£C5›@.™@. E3¦F6©E5¯H9¸N@´KR¯GN¥@F™9=‘8:Š?<€A:r@5k?2uK=€NC@:‚,-“(0µ8FÒK\àJIáMMÌ>=Ã>?Ò_\µXQ„@5€UDvbJa]@Z_?ekIonOshJ{fK†kPÌ]VÚ][êSZó7SD=]P.dY9ga?ifCnrMz‚[z‰bt†^r‰]oŠ]oŒ^qŽ^u’bw•cw•cw•cr’mw—rz˜vy–w~˜}ƒ„…‡ƒ›…™ƒz’|q‰ql„jhc`yYTnKJdAWQEVPDUOC8938938939:4;<6<=7?>9@?:@?:B?:C@;C@;C@;D?;D?;D?;FA;FA;FA;E@:E@:G@:G@8F?7IB:HA9H?8G>5F=4E<3E<3D;2D:1D:1D:1C:1D;2D;4D;4C<4?80?80<71;60:5/:5/94.94.96/96/96/;7.<8/@9/A:0C;0E;1F<0I=/K?1M@0M@0NA1M@0N@5M?4L>3K=2I<3H;2E;1D:0C:1C:1A:0A:2?;2@<3@<3A=4SE–I?•MA›OB¬RJÃSRÏNSÒENœE2B0 @0¥?1¦:-¥7*¦8+§=/¬E4¡>+˜7$:%¥>+®@/³B2¹C5§/8±9B¹DL¾KR¸NRªLL“B>}:1u;/q9,s5*2-›47º8@?:A@;BA4G=3F<2E;1D:0D:0E;1E;1D;2E<3E<3E<3@91?80?80<71;60:5/:5/:5/96/96-;7.;7.=9.@9/C;0D<1F<0F=.J>0L?/M@0M@0O?/O?/O>4O>4N=3K=2J<1G:1G:1D:0D;2D;2B;1B;1@<3A=4A>5A>5Q9/X+&‰:?ÅP`ãOeñOfíPcÐGO¢20”:/Ž?.–C3®F=ËFGÞ>Hã2B§H6§F5©B3®@3°?1²>1³B4´D6²G5«B/£<)¤;&©<(­:(¯5&®3$¸7<»8>½7>½6=¿9@?:BA4G=1H<0G;/E;/E;/E;/E;1E;1D<1D;2D;2@9/@91@91?82<71;60;60:5/;7.;7.;7.<8-?8.A;/C;0D4N=3N=3J<1I;0G;/F90D:0D<1D;2B;1@<1A=2A>5B?6C@7_4-t42¯KSâYiðH_ð:Qá2C½#+¬/)š9(;&•=)¬@3ÈA=Ý:?ä0;¨D4¨B3«?2®>2´?5¹C7½G;»J<¬>/ª?-¨=+¨:)ª9'²:*¹;-¼ÃLDËTLÑTNÙKJÝ>Cã3>è.<Ù5+Û7.Ò0+Ò94Á82µ@9µ[P”UDxO9~dI„lPbF]F®eTÍqdÛsjübÿ?eÿAiÿBkÿBmÿAmÿ@oÿ@oÿ@qÿAqÿBnÿ=hÿEmÿJpöGhíMièZrÛbs½YcŒ@D]($M-"PC2PR=CO76H.WH1eYCujT€{gŽy˜œ‹”Œ‡”ƒ~‰—ˆŽœŒ™ˆ‡’‚Š“‚—žŽ¤¨—²¶§¸¼®¿Á¶ÀÁ¹ÂþÅÅÃÃÃþ¾¾²´³¢©¢—Žy‡vh{e\sWTmONiHTYBUZCW\E560560671782893:;5=<7>=8@?:B?:C@;DAGB>GD=GD=HC=ID>IE0I=/G>/G>/F<0F<0E;/E;1D<1C:1B90A:2@91@91?82<71;60;60;7.;7.;7,<8-?8.A;/D0K?/M@0NA0P@0O?/O@-P>2N>1M<2L;1I;0H:/F90C9/C;0B<0B;1@<1A=2A?3B@4C@7t50–FEÆY_ßUbã@Qä5FÚ0;À*+¯1%Ÿ9#•;!”: ¡=&·=.Æ90Ê2- :,¢:-¥9-¨6,°91¸A9»E;·E:­?2«@0§<,¤6'ª6)·=0ÄD9ÊG=¾9*Î@4áD=ïA@öDâ<@×?>ÎC>ÍJB×RMåZWéPRìELï;Gõ6F÷2Dø/Bû1Gÿ6Lø:Tø:Tø:Tû:Wþ=\ÿ?aÿBeÿDiûhú?júAm÷@nõ?oò>mï=mÿFnÿ:aÿ>dÿInÿJløMmòSoæXnëp‚Å_j˜ILt:6\6-O9+OD2SN:`PArdWˆ|p”Ž‚Ÿœ“¦§¡¡¦ ”˜”Ÿ›¨¤¦¯¬¦¬ª¤¦¥§§¥µ´°ÄÀ½ÍÉÀÒÍÇÕÐÌ×ÏÍÖÍÐ×ÎÓÑÊÑËÆÌ¿½À°²±˜Ÿ˜€Œ€m~k^u[VoQSlNU_DV`EWaF560560560560671893:94;:5=<7@=8A>9C@;DAHC?HC?GD=HE>ID>ID>JF=LE=MF2G=1F<0D<1D<1C:1B;1A:2@91?82?82<71<71<8/<8-<8->7-@:.B:/D2B@4@@4+)¨JKÁSV¾=BÀ/6Ç.3Ä./»0)ª1 £9!›=!–=˜= ¡=#¥;#¦6"6- 8/¢5.¦3,®71·@:¹B<²@6±B7­A5¨7È`UÑq¤eSŽWC‡N:¡XGÊe[ãa_ëPTëBIùDKí@DÞ@?ÑB<ÅB8ÁB9ÌIAßPLìKPô@Kù9Hý7Hþ5Hø3Eö7G÷=K÷9R÷9Rø7Rú7Uý7Xÿ9]ÿHC?ID@HE>HE>ID>JE?JF=MF>MF2G=1E=2D<1C:1C:1A:2A:2@93?82<71<71<8-<8-<8-?8.@:.B:/D2??3@@4”67Á]_ÈZ[¯78®,,µ/,±,#°0#¯8$®B(©G* G'šF$šF$–C!”? Ÿ81£;2¦92¨50°:6¹B>¹D=±>7«<3¨<2¦»72»:Ê<$á:*ñ.(ÿ$&ÿ'ÿ'ÿ%ÿ%(ù,)ñ2*ë5*è3(è2'ê/&ì-%Ü=(Ñ2Þ>0Ñ5)Ê7/Â?7¯C9Çqd²m]–YF™VE¿i\ÝlfãSSë@Hù?Lï4¹6,½4.Î44ïBHø8Gÿ2Fÿ3Hÿ5Iú7GöYÿ=Xÿ:Wÿ6Wÿ5Yÿ5\ÿ6_ÿ7eÿ;kÿ:mÿ;oÿtû>vôEbýNkÿTqúIfð?\ÿRqÿfƒÿf€ô^wêbváky×s{Ärvªfe”ZV‰TN’€~¨™–¾°°Ä»¼ÆÁÅÈÇÍÅÈÑÀÄÏÆÌØÈËÚËÍÜÓÐáÚÖåäÜëêßïîáòòäãõççöçêóâèñàêïßêìÜéå×äÓÉÒþĪ¬©—y‡vi|f`w[\uWbqRapQ`oP201312423653875984984983;:5<<4==5??5AA7CC9EE9EE9HH@HH>HH3B90E<5C:5@85?74@86?67>56:44F85E76B87@78>:;<:=<<>==????A@,§B0©D2©D0©B/¨?,«>*­<*µ=-¾C4ÅF7À>0·3&Í6+Ì8,Ì:-Ì=/Ï=.Ô(Þ9%Ô4Ï4 Î9%Å8&¾6&Æ@4ÕQEÒIAÜMIïUUüVXýJPø9Aü4?ÿ9DäCHßCFÓAAÆ?;¹=3®=/ª?/ª@0¿Q@ÉQCÑLCØC=å??÷@Eÿ>Gÿ8CúGMúENûEQþESüARú=Sü>XÿCbÿGiÿBhùHH7H?8F=6C:5C<6A:4?74?74@85>95=84;63>3/=4/>42<74=98<;9=<:>=;@?;C@9G@6J@4L@0O@-P?+P>(=B,?A,E=0H92K63J46F35A57>=;8=69?5?A4C=-J9)^B4sRC¼K=¬;- 2#¡6&£:'8$ž9%£?(¡;%¦=(­@,³@-¶=,·9*¸6(¹5(¦;+¤:*£9)¥;+¦?.©B/«B/«@.­?.«:(±<+¿E6ÆH9Á?1¼8+½7+Ï5+Ï7,Î:.Ï;/Ó=/×;/ß8/ç4/ð0-õ--÷-+ò/+ê4)ß8(Ö;'Ï=&á:'Ù7"×8%Ô=*Ì;*Á5&Ã;/ÍG<ÐG?ÙJFèPOóPQôGKò;@÷:Aÿ?GàDGÜDCÓB?Å>8·;1¬;-ª<-©>.µF5ÅM?ÓNEÜGCã?@ñ>Bý>Fÿ>H÷DJ÷CLúDPÿFTýBSú=Sü>XÿBaÿFhÿCiü?iù@lùBpûGvüJzþL|ÿIxÿHtõKpðRsò]zö`{ùXwýMqÿCkÿAlóCjÝJgÉ^p®pugNI†‚v´”‡Ì²¥äÔÇëäÜèéäéêîéçòíáõöâûýàüÿâýÿçþÿìÿÿòþÿ÷üþúûþûöýúõü÷ôúôôøïðôëîñèëïæëäÞâÜÖØÊÆŲ²°ž ›Ž“Œˆ…ˆ…–†‰€†}/.,0/-10.21/43/540762761:94::2<<4>>4@@6BB8CC9DD8IF=IG;JH;KJ8MJ7NL7NL7OL9KI:NKBTSQ_^dihxmm…lkŠihˆcYd[QZQGPJ@IH>FG>CC=A@::1>:1=90:3-94.;60=82=:3>;4?<5?<3C?4F@4I?3L@2O?0P?-Q>-P>*3@&7?'<=+A;-B8/A62>42;31=85B:7H94O2.[+)o-.Š:= EJª9+¢2$Ÿ1"¤9'¥<)ž7$8$¢<&¤;&¨=)±A-¶A/¹>.»<-¾:-À:.®>0¬<.©9+¨:+ª<+¬>-­>-¬=,²?-®9(¸>/ÊL=ÊH:¼6*º2&Å;0Ó5*Ô6+Ò8,Ô:.×;/Û9.â7/é2,ñ/-õ.+õ.+ñ0)ç2'Ý6&Ó8$Ì:#à7$Ü5#Û8'Û>-Ó=.Æ7)Å8.ËA7Ç<5Ì?8ÙEAåKIìIJëCCí?Að@CÜDC×C?ÏB;Â=4¶:.­9*ª;*«<+ª9)¿E8ÔNEÝIEâ?@ëXÿ@_ÿDfÿCiþDmÿFpÿIwÿK{ÿL|ýK{ÿCvÿGwÿJtúNtþZ|ÿa€ýUvòCdüHkÿRvÞ=\ÎH`Úz†µ}~\F;„r³‹Õ³§óÛÑúíåøóðøøú÷ôýôëüüêÿÿéÿÿëÿÿíÿÿòÿÿ÷ÿÿûÿÿýþÿþúÿýùÿûøÿøöþõöýòöûðôúïóðçêåßáÓÏξ½¹­®¨¢¥œ£™£—¤ªœŸ¥—œ¢”/.,/.,0/-10,21-32.54/650872991;;3==3??5AA7BB8CC9IE<0?=1@<0?<-A;+F?/H?.K?/M@/O?/P?/Q>/P=.<@)=?*?>,?<-?;0=:3;:5:94<94D95N43[*-o&--8¨3C¶7H§7)¥7&§9(ª?-¨?, 9&Ÿ9#¤;&¥:&«<)³>,¹@/½>/Â<0Å=/Ç=0¹@5¶=2²:,®8*¯9+°:,²:,²:*¶;,¹;-ÄB4ËE9Ç?3¾1'À2(Ê:1Ú3+Ø4*Ù7,Ú8-Ü8.ß7,æ3,ì1,ó0,õ.+õ.)ï0(æ1&Ú4$Ñ6 Ê8Ü/Ú0Ú4$Ý;,Ø4¾Vßetû §Í‘]=2aP@©wlÑ¥œöÔËþêãÿôòÿþÿÿüÿùóÿüïÿÿïÿÿðÿÿòÿÿôÿÿ÷þÿûýÿüûÿýùÿüøÿúøÿù÷ÿö÷ÿôøÿôøþó÷öëïìãäÚÔÔÉź¹´³´¬±´©²µª¶¾³°¸­¬´©10,10,0/+0/+10,21,43.54/77/880991;;1==3??5AA7BB8KD:LF:OG:QJ:RK9SL9RM:QK=OKBVTUfdowx††¨»“ÃŽ‘ƏŠÀ‡‚¸{w©rlœid_[~UPnNJaJGXEBM?=B;7696196-86*86)581692891;;/><-?<+C<)D<'I>*J?+L?,M@/M@0M?2M?4L>3M?4K?3F<2B90=909:25<44>57<5>:1H3.\0/{48œ;D¯9E²2Aª<+ª<+«@.¬A/©@-¥<'¥<'©>*§8%­:'µ<+¼=.Á;/Å;.Ê<0Ì<1ÁA6¾>3º:/·7,·7,¸8+¸8+º8+»7+ÇA5ÍC8Å8.Á1&Æ3)Ë7-Í6-à2+ß3)á5+â6,ã5,ç4-ê2*ð/*ö/,ø.*ô/)ì0'ã1#Ù4!Î6É7Ú/Ù/Ù2"Ù5)Ù9-Ô:0Ö?6ØE=ÕF>Í@9Ç<5Ë@9ÖKDÙNGÐF<Å;1Å=1Ä<0ÀCí>EóBJûJTÿJYýFXúCYýB]ù@_ûBdþFjÿJsÿOxÿOzÿLyýIxÿGwÿRÿQ}ÿIqûImÿStÿVtøNiëD^äF]èYkÿ—¢ÿ¶¼î žˆKFd2)©jc͖ôÇÁÿãÞÿòðÿüýÿýÿú÷ÿý÷ÿÿöÿÿöÿÿøÿÿùÿÿüÿÿýýÿýúÿüøÿûøÿúøÿø÷ÿ÷øÿõ÷ÿôøÿôøýñóóéêäÜÚÖÑÍÍÊÃÉÉ¿É˾ËÍÀÇÑȾȿ·Á¸84163.52-30+30+41,52-63,85.96/:70<90>;2@=4B?6B?6KC8ME:PF:SJ9TK:UL;SL<=;:6;8396/267465672880<:-A<)D>(G?(I?&J?)IA,JA0IA4IA6HA9G@:R9?ž46§<*¨=+ª?-ª?-©>,©>*¬?+¯@-«8%²9(¹:+¿:+Ã9,É9.Î:0Ò;2É>7Æ;4Ã81Â8.Â8.Ã9/Â8.Ã6,Ä7-ÑC9Ò?5Ä0&Ã,#Ð7/Ö<4Î4,æ1*æ1*ç2)è3*ê3+í2+ð/*ó.(ø.*÷-)ò/)ì2&ã3$Ø5"Ï7 Ì7Ü5#Ù3#Ø2$Ö2&Õ5)Õ7,Õ;3Ö?8ìYRáRJÓHAÊD;ÉF<ÊJ?ÅG;½?3¼;(¼;(º;*¹:)·:(¸:+¼>0¿A3ÁA6Á<5Å<6ÏA?×EEÝGIãJMèMQëADì?EðCIúJTþN[üJZüF\üF]øA]ùBaýEiÿJpÿNwÿOzÿMxÿKxÿR{ÿR{þOvýOtÿVwÿ]{ÿSoîD^øUjîQd÷dtÿ’žÿ‹“òƒ‰Ç`c­KL²keώˆñ¼¶ÿÞÙÿðìÿúúÿüþýûÿüûÿþûÿÿûÿÿûÿÿüÿÿûýÿûûÿûøÿûøÿüùÿûùÿûúÿøúÿöøÿòõÿðóûìïòææçÝÛßØÒÛ×ÎÝÛÏàÞÑàáÓÚãÞÏØÓÅÎÉ<94;8385052-41*41*52+63,74-85.96/;8/=:1?<3A>5B?6KA7MC7RF8UI9WK;WK;UL=SJASJK[Xcnl‚‚‚¨‘”Çš Þž§ì¡©ò¡¤óž í™›æ•˜ß”•ÖÌˆ‰¿‚ƒ±zz rq‘fd|XWiPN\IGRFCJDBG=?K==G;:?;:8<92A;-D=*F@*F@(GA)GB.ED2CC7BC=AC@>BAG9HH,©>,ª?+­@,¯@-°?-°=*±8'¶8)½9*Ã9,È8-Ì8.Ò91Õ;3Î;4Í:3Ë81Ë81Ì92Í:2Ì70Ë6/Ó<3Õ>5Ò91Ì2*Ð3*Ù;2Ú<3Ó5,è0(é1)ì1*î1+ñ0+ò/)ô-(ö,(÷-)õ.)ñ0)ê2(â5%Ù6#Ò7!Í8 Õ8%Õ8%Õ5%Ñ4%Ò4(Ô6+Ô7.Ð7/ãNGèXPçZQØRIËH>ÃE9¼B5·?1¹<&¹<&¹<(¸;'¸9(º;*À>0Ä@4ÉD;Æ?9É@:ÑFCÕIHÖHG×IHÛJMìCFêADíDIöKSüQZýN]ûL]üJ`öD^÷DaùFfýIlÿNuÿOxÿOxÿNyðYzðWvóVuüYxÿ]{ÿZuûQkòI`ýWköUgêN\ö^kâKZçSaçSaåQ_¸jfɂ~窧ÿÓÑÿëèÿôòÿøùÿÿÿùýÿùüÿûüÿüüþüúûýùøüøõü÷ôÿú÷ÿûøÿüúÿûúÿøøÿòõýîñúëîðââëÝÝäÙÕâÙÒæßÕëçÛñîßóñâêóðÜåâÏØÕ@=6=:3:7074-52+52+52+63,74-74-96/;8/=:1?<3@=4A>5M@7OC7RF8WJ:XK:YL-C@-CB.BC3AE7>E=€UE’YFL7A+“A+«@,®A-®A-®A-°A.²A/²=+°7&µ7(¼8)Â8+È8-Í6-Ñ7/Õ8/Ù;2Ò73Ñ61Ñ61Ò72Ô94Ô94Õ81Ó6/ÞA:Ö8/Ñ3*Ø7/Þ=5Þ=5Û8/Ù6-ë0'ì0'ï0(ò/)õ.)ø-)ø+(ø+(ø-)ô/)ð1)é4)á5'Ù8&Ó8$Ï8#Í8$Î9%Î7$Ï6&Ð7)Ô8,Ó7+Î4*Ì3+ãNGôd\ë`YÔOFÂB9¸<2´:/·?&¸>&·=&¸;%º9&½9*Á;/Ä>3ÌC9ÊA9ÎE?ÕKHÓLIÎGDÌFEÐJIéFGæCDéDHòMSùRZùR\ùN^úOaõG^õGbøGdûIiÿNrÿRvÿRyÿRyå[uë\xõ`}ü_|øUpõMgùPgÿYnÿ[mÿbsóL]úSdøM_ÿRgüI_ýE]³d`¾tqښ˜ûÈÅÿåãÿîëÿõôÿÿÿûÿÿùÿÿùÿÿúÿÿüþýýüúýùöýøõÿøõÿùöÿúøÿúùÿööþððøêêõåæìÜÝèÚÙæØÕèÞÕðèÝùóåþûêÿþíòûúâëêÔÝÜA>5@=4?<3=:1;8/96-74+63*52)52)63*74-:70=:3@=6B?8J@6OC7RF8VI9WJ9XK;ZL?[NHTIMXR`gd|}©’Ì—Ÿçž©ù¤°ÿª³ÿª³ÿ¬³ÿ«³þª±ùª®õ¨«î§«êŸ¡Ü™šÒÁ±ur¡he’]Z…XR~YP{YQxVOpOG_E?M?:@?;8@@6>>2@B5@F:>E=:C>9CB*®?,±@.³@.´?-¶=,¹;,º6'¿5(Ä6*Ë7-Ñ7-Ö8/Ú91Û81×84Ø95Ù:6Ú85Ø61Ø61Û83Ý:3æC<à=6Ú70ã@7þ[Rÿlcÿ]Tã@7é1'î2)ò1*ô/)õ*&÷'%ø(&ú*(ø-)ó0*í2)ã1%Ú0#Ó1"Ò5$Õ:(É=&É=&Ë=)Ï<*Ñ;,Ò9+Ô8,Ó6-Ú@8Ð71ÜGAôc^ãXQÉB<Å@9·3.´<#¶<$¹<&º<&½:(¿:)Ä<.Ç=2È>4ÌC;ÙPJßXTÓOJÁ@;¿@:ÊKEäFEäFEèJKïPTòQWïNVïKVñL\ùRdøOf÷Ke÷JfüMnÿRsÿRvÿPtê[wêZuðZuú[wÿ]xÿZsÿWnÿViÿctþVgÿ\mÿYlõDXùBXÿMeÿIb·nh­hcˎ‹èµ²ùÑÏÿêéýïîúù÷øþüøÿÿøÿÿøÿþúþýþþüÿûøþöôþùõÿû÷ÿùöÿöôÿööÿõõöèèç×ØäÔÔÞÐÍãÖÐñçÝüôçÿøèÿüéÿÿí÷ÿÿèñðØáàC?4B>3A=2?;0=90;7.:6-95,73*73*73*83-:5/=82@;5B=7I?5LB6QE7UH8VI8YI9YK>ZMEUKLXP_ebyz¦‰É”œäš§ö ¯ÿ«´ÿ¬µÿ­·ÿ¯·ÿ¯·ÿ¯¶ü¯³ú¯²÷§ªí¢£ä˜˜ØŒŠÉ€~½uq®ie¢b^›cVŽbU‹]TƒWOtNHdFCTBAIAAA;=8@C9ß<7ß<7â=9æA=èC=éB<èA;ç@:èA9ä@7Ü8/Õ1'Ø6+ëI>þ\Qô?4î6,ê+#î)#ù,)ÿ./þ,-ø((ú0.õ4/ï7/ç6,Ü4)Ö2&Ó3%Ò5&Å='Ç<'É<(Ì;(Í:(Ï7)Ï6(Ð4(Õ8/Ï5-Õ<6åPJçSOÛLHÏA?º/,¹=%º>&»='½<'¾9(À8(Ã9,Ä:/È>4ËB:ÕOFÜWPÒQKÃD=¿B<ÆKDáIFáIFåMLëSRíTVëPVéNVìOZ÷VføUhùSiúRküRmÿSqÿStÿRsïNoøTvÿ\|ÿ^{ÿ[vÿUoýQgûReüUføQbÿZhÿZjôM^úRcÿWiôI\§ha™\W·€{Ù©¥ïÇÅýáÞùêçýøõøýùøÿÿ÷ÿÿöÿýùÿýÿÿýÿûûÿö÷üùòþùõþùõþöóÿ÷õÿõõøêéêÜÛäÖÓÝÐÊáÔÌïåÙüõåÿùçÿýéÿÿì÷ÿýèñîÙâßEA5EA6C?4A=2?;0=9.<8-;7.84+84+73*83-:5/=82?:4A<6G>5JB7ND8RF6TG6WG7YI:YKBWKKXP[b^wsuž…ŠÂ™Þ—¤ó¬ÿª´û¬¶ý®¸ÿ±¹ÿ²ºÿ´»ÿ³ºÿµ¹ÿ¯²ùª­ô££ë™—àŽŒÕ‚€Éxt¾qm·l`¢i]dY“^V‡VQyNKhEDV@@J76;?=>HBBKABN?BYFJmX_}fnt¤}¬§‚®¬}§´w ¾p—Âc…ÃRpÅE^ÔI\×EPÊ9<¾3,»7(¸;%³; ¯<*¯<*°;)³;*·<,»<-À<-Ä<.Ä6*Ë8.Ô<1Û>5á@8á>7à<3á:2Ü73Ù40Ø3/à93èA;ìE?êA<å<5ã<4Û4,Ø4*Û7-Ô2'Ì, Ö6*èH<÷I>ò@6ï4-ð-)÷+*ý+,ý+,ø*,ñ))ì/+è3,â5.Ü4+Ö2(Ô2'Ô2'Ç:&È;'Ê<(Î;)Ñ;*Ò:,Ô8+Ô8,Ñ4+Ø;4Õ:5Õ<7çONîXYÙEEÅ02¾=(¿<(¿<(¿:'Á9)À8*Á7*Á7,Æ>2ÇA6ÏJAØUKÑRIÄH>¿E:ÃH@ÚIDÙHCÝLGäSPåSSâPQâMQåNWòXdöZhý[pþZrýUoûQlýPnÿRpÿFmÿOvÿZ}ÿ[{ÿVqÿSkÿVkÿ[mûYhúYhü`mö`kî\fñenífmÚT[’cY}ND™lfؒ߹¶ñÓÑôàßþöôøú÷÷ÿý÷ÿÿöÿýùÿýÿþÿÿýÿÿ÷ûúúòüùôüùôýøôÿùöÿøöùîìñãâçÙÖÝÐÈÜÒÈîäØýöäÿûèÿýçÿÿè÷ýùêðìÝãßIE9HD8FB6D@4B>2@<1?;0>:/:6-95,95,94.:5/<71>93@;5E>6HA7LD7QE5RE4UF3WG7WIC_@EmDJ€OU•]f¦jrÇe˜ÍkœÏl›Ïf‘Í]…ÎTyÌFgË8UÌ0Hß>PäBMÔ:<Æ7/Ã@.ºB*®/Û?0Ü@3Ü@3Ò6*èKBåJEÎ50àFFóZ\áHKØ?BÆ=-Ä;+Ã:*Ã:*Ã:*Ã9,Á9+À8,Â<0Â>2ÈF9ÏOBÎPDÄH<¿C7¾D7ÑF?ÑF?ÕJCÛPKÝROÙMLÚKMÜKPëX`ó[hüaqÿauûWoõOgõMgúPkÿJuÿOyÿSwÿRqÿSmþ[pÿcuÿixÿguüaoôbmìelàglÔjjÉjh¼c_dVeH:_Tª‡Í«©åÇÇïÚÙÿóóùøöøþü÷ÿÿ÷ÿÿûÿÿÿþÿÿüÿÿ÷þûüôúûóûúõþûöÿýùÿûøþôòøíéêßÙÞÔËÝÓÇíæÖÿøåÿþèÿÿæÿÿçõúóêïèáæßLI:KH9JG8HD8FB6D@4B>3A=2=9.<8/;7.;60;60<71>93?:4B?8EA8JD8NE4PE1TE0VG4XH9ZMEVMR[Whkl‹~‚²‰“Ð’Ÿå™§ò§­÷©¯ù«±û­³ý°´þ°´þ°´þ¯³ý«®û¨«ø¥§ô ¢ïšœé“•âŠŒÙ„†Ó…É{u½mj­dd _a”X[†QQsNHbUFY_CRlBLEO˜LV¬U]¼[dÅ]fçJuéNxæPuàLn×FcÒ?YÍ5JÊ+?Ú5EçAMéFKÙ><Í>6ÊH8¿J6°B)·>-¸=-º<-½>/Ã?2ÊB4ÐD7ÕE:ÙE9ÚB7Û>5Û:2Ù6-Ù5,Ú3+Ù2*Ô1*×4-Û60Ý90ß80Þ7/Ý6.Ü5,Ö/&Ù5+Ø6)Ï2#Í1"Ò9)Õ>-Ó<+Ö=-æD7÷KAÿD?û56÷)-÷)-ù.2ø67í55â30Ú1,×/,×/,Ù0-Û/-ã80â:1â:1â<0à<0ß=0Ü?0Ú>1Ñ7+ïWLù`XÓ;6Ó;:èOQÞEHèOTÍ=2Ê:/Æ8,Æ8,Æ:-Å;.Ã;-À:.¾:-¾<.ÁB3ÇH9ÇI:ÂD6¾@2¼>0ÊE<ÊE<ÎI@ÕPI×RMÔNKÓKK×LOçZ`ð^hüfrÿhxü]qóOgóMeùQjÿPzÿQxÿQpûSmø\qûhxûjw÷epüfró_kí_kêkrÝsu¿lh¦f\¡l^ujXVI8kXJ–{t¾ŸœßÁÁïÕØþîïûõõúüûúÿÿùÿÿýþÿÿýÿÿûÿÿ÷ÿýÿ÷ûþõûüöÿþùÿÿúÿþúÿûõÿ÷òñèáäÜÑáÙÌðé×ÿúæÿÿæÿÿãÿÿäöùðíðççêáQK=PJ3Õ;1Ö8/Õ4*Ö3*Ø4+Û4,Ü5-Ú9/Ý<2à=4ß<3Ý90Ü5-Ü5,Ý6-Ò.$Ý;.Ü<.Í1"Å.Í8$Ð=)Ì;&Ë:'Ò9+á:1ó=9ÿ@@ÿ;?ÿ27ô+1ê,.ß+,×+)Ó+(×/.Þ44ä88è:;ó55ò64î73é6/ã7-Ý5*×5(Ñ5&Í5'çPEÿmcÛHAÈ42×CCÓ>BêUYÙB;Ô=6Ì70Æ6-Ç9/Æ<1Ã=1Á=.»9)»<+½@.¿B0¿B0¾?.¼=,»<+ÃC8ÄD9ÈH=ÏPGÒSLÐOIÐOJÔOPç_cîaiûitÿm|ÿdu÷UjõRgýWoÿSxÿUtûWpð_pñoyôy~êmsÞXaïamò`mïaoðs{숊ɂ|¥wjšyhhpYMO:^WGƒqg±•’Ý¿¿ñÔØýéëþôõýûþûÿÿúþÿýþÿÿýÿÿûÿÿöÿüÿøùÿõúýôÿÿúÿÿúÿÿúÿý÷ÿþöùðçíåÚéâÒôïÜÿûåÿþåÿÿãÿÿâøúíòôçîðãSM=RL4D=5B;3A:4@93A:4A96B:7@A;CC;IE:NG7QF2RF.UF/WH5XJ=RHFXR\jh€}§‹’Æ’žÚ–¤å¥¦ù¦§ú©ªý«¬þ¬­ÿ­®þ¬­ý«®û¨¬ö¦ªó¤¨ñ£§î¡¨î §ë¤è›¢æ™žâ’šÛŠ”Ò…Ê‚ŽÂ‚‰·‚©‡yšŽmˆšczªWi¾P]ÓKWäGPí?Hñ9Aî;6é<5âB6ÙH7ÎJ5ÅG1ÂD.Å@/ãUGàG?Ú;7Ø64Ø88Ö:;Ï98Ê66¼=.¾<.¿;.À;,Â8+Ä6*Æ3)È1&Í5*Ð3*Ñ3(Õ2)×3*Ù5,Ý6.Þ7/Ü>3Ý<2Ü;1Û8/Û7.Ú6,Ø4*×3)Õ3&Ó3%Ñ4%Ï6&Ò=)Ñ>*Ê9$À2Æ;(È5%Ó3'ç60ü;<ÿ=@ÿ7=ù27ê-1à..×--Õ0.Ü44ã9:é;=ë;>ý.4ú/3ö01î1/æ1*Þ2(Õ1%Ï3$È2#Ð>/új_ãTLÈ95Ð@@Ë:=ãRUçJEÝB=Ò93Ê5.Æ8.Å;0Â<0¿=-¹<*¼?-½@.¼?-º;(º;(½<)¾=*º>2º>2ÀD8ÈLBÌPFÊNFÌMGÐNLçbcêbføhqÿo{ÿhxøYm÷Ujþ[pÿXsü\tìbqãktç€í‰‡ãyyØ_dñhrÿl|öcsíkwø‘•é¤ŸÀ–Š¥‹z\pWFRRLÿ4:èB*âD)ÙH)ÎN+ÃO(¹L%¶H%»D&ÛWBÚF8Ú;5æ>>íBHé>Fß5>×08ÈF8ÇE7ÈD7ÉA3Ç=0Æ8,Æ3)Ç0%Ê0&Î1(Ó2(Ö3*Ù5,Ù5,Û4,Û4,áC8Û=2Ø7-Ø7-Ü:/Ý9/Ù5+Õ1'Ù7*Ð0"Ì0!Ð9&Ì9%Æ5 Ç9#ÑE.Á:&É:)Õ7+â3.í//÷05þ5;ÿ;BÿIMúGJîDDæ@@ä>>ã9:ã28á.4þ'/û(/ø*.ó-.ë0+ã2*Û5)Ô7(Æ0!¾/óeYê]TÌA<ÓEDÊ;=ÝNRïPMäFCÕ:6Ê5/Æ8.Ä:/À,¼A/½B0º=)·8%º9&¾;)Á>,²8+²8+¸>1ÁG<ÅK@ÄIAÆICÊJGå`aæ^bñdlÿlxÿix÷ZköTiýZoú^tòcuãgqØqr݅é”ê‹‡åruùq{ÿxˆõ`sßXgóŠ‘ý¶´Ö«¢¬•…TnSAS;PTCkaWž†‚Ý¿ÁõÖÛøßåÿóùÿûÿÿþÿüýÿýüÿÿüÿÿúÿÿôÿùÿø÷ÿôöüòüÿøýþøüüôÿýöÿÿöÿþôûõç÷ñáüúåÿþåþýáýþßÿÿãÿÿñýþîüýíXO@XO@WN?VM>TKñ8>æ=@ÙD@ÑHBå;Dà;BÞCGÉ99ÌB@ËD@½/-ÞHIëHKîAGï;Dì8Aé:?â<>Ú<;Ô<9ÏA=É>9ÊC=ÑLCËK@¼>2³7+¹;-¹9,¾8-Å7-Ê3,Ï0,Ô/-Ý11á34çA1à9)Ü1 á1"é8(ê;*ã6%×2Ñ2Ì4Ê5Ç4 É3"Ì3%Ñ3(Ô3)Í.(Ï2+Î6+Ì8*Ë8(Í7&Ð7%Ø6'ß3'é2,ð31ò01ð+2í*2í+4ï-6ú+1÷*/ñ+,î.-ë4.ä8,Ú7(Ð5#Ã.Ä3 çXHèZLÊ<2ÞOGÄ5/ÚIFÝQRÚLKÒDBË<8È80Ç7,È9+Ê;+È;)Å:'À9%½:&»<)º=+¸=+¶=,³9.µ;.¹=1½?1½?1¿@1Â@2ÅA4ïk_õqeêd[ômiùroécbðjiútuÿk|ûivñdmï_hòaføgjõnkîqk÷|wÿ}ƒþYjÿ[wîZpû¬±«°œaŸz]sMIZ6LR6snX£–†Ë·®íÕÓÿîðÿõ÷ÿ÷ûþøüüüþþÿÿþÿÿþÿÿýþÿæÿòàÿëâýêìÿð÷ÿôûÿôþÿóÿþñÿýïÿûîÿùèÿùæÿøãÿùãÿùáþúáýÿþþÿÿþÿÿYPAXO@XO@VM>UL=TKDë:Bè7?ä7;Ü89Õ:8Ð;7ÓF?Ç<5Å<4ÌG>ÌLAÁC7¶;,·9+¹7*½7+Å7-Ë4-Ñ2.Ø3/á53æ66á?0ß<-Þ6)à4&á6%á6%Û4"Ó4Ð:"Ê:"Æ:#Æ;&É<*Í;,Ì8,Ì5*Ö3.Ö5-Ñ7-Î8*É6&Ç4"Ë4!Ð3"Ø2$ß1(å/+ç.,è,-æ,1æ-3ç.4î*,î,-í0.é2.á3*Û5'×7'Ò9'Ó@,»*ÔE5Î?1ÙF>êWPØC?ØBAåWVâRRÛKJÔC>Í=5É9.È9+Ç8(È;)Ä;(Á:'¾;'½>+º?-¹@/¶>-²9.µ;0·=0¹=1º?0½?1ÁB3ÅC6ëi\òmdçb[ðkfõolèbañklûuvÿp€ÿo|öirë^fêY^òadøqnù|vöyuÿx~ùRdÿUríXnö¥«¥¨“X”n[tLN_;QZ;us\ª×úøàÜÿôóÿúûÿúûÿûüüüþúþÿûÿÿúþÿûüþçÿñáÿêáýçéÿìóÿòøÿóýÿòÿÿóÿýïÿýíÿúëÿöåûóàúòÝûõßý÷ßúúøüüúÿÿýZQBYPAYPAWN?VM>UL=TKCæCß>Câ;CØ7=Õ?AÏA@ÉD?Â=8Ã96ëWWàBCæ=Bé:Aæ7<Þ58Ö66Ñ96Ì;6ÕHAÅ:3¾5+ÅA5ËK>ÆH:»=/¶8)¹7)¿7+Æ8,Î7.Õ60Þ63æ87ë;;Ó5)Ö6*Ú6*Ü6*Ý5(Ý7)Ú:*Ö?,Ã5¼5¸6 ¸7"»9)¼8+¼4(º0&é=;å>8Þ=5Ô*ÓB/Â1 æTEÐ<0ÚA;ÞC?èJIòTSèVVçSSãOMÝIEÖC;Ï<2Ê8+Å6&Ä7&À7%¼7$»:'¹<*·>-µ=,²=,°:.±;/²<.µ=/·=.º?0ÀB4ÃE7Ü\Oêg]äaYñlgöpoçabìfgòkoäP`ï^kôhqòemñ`eödgûqqúzwövsÿnuõJ]ÿMjïUmñœ¡ŸžŠPˆcVoEOd=Va?ww]¯¤’âÐÄÿíæÿ÷óÿûøÿýûÿþüûÿüûÿýûÿýùÿû÷ýùãÿëÜþãÚøÞàúáèûåïüèöýëýþîýúëÿúêÿ÷èúñàòê×ðèÕôìÙùñÜýùöÿûøÿþû\PB\PB[OAZN@YM?YM?XL>XL>UI;TH:SG9RF8RF8RF8RF8RF8JF=KGÓ>@ÐFCÅA<¸71Å>:ê[WÝABä?Cç=@ã:=Û89Ó97Î=8ÌA:ÏE;Ã9/»2(À/¸9(¼8)Â8+É:,Ò:/Ù80á83è;7ì=:Ô3+Ö3,Ù5,Ý4-Þ6-Þ7.Ú:.Ô>/Æ9(Á<)½>-¹>.»=/½=2Á>6Ã>7ó?>î?<æ?7Ù=1Í:*Æ9%Æ;$È<%Ï<(Ï8'Ï2#Ñ1%Ó2(Õ4,Ñ2,Ï0*Ñ3*Ó5*Ñ7+Ï7)Ê7'É8%Ê<(Ì>*Ê<(Î=,ô^PàF<Ò3/Ò.-è?BþUXÿvuÿroÿjgö^YçPIÕA7Ç5(½.Ä8'À9&»8&¹:)¶=,µ=-±>,°<-­<.­<.®=/°<-±;-¶>0¼B3ÁE9ÉMAß`Wâa[ôpløtrå`aä]aå^dÙFVçYeógpôgo÷dlýjpÿstúxvõssûenóCXÿEbðRk뒘œ—ƒN‚\Ql?Ri?ZhDy|_°ª”èÛËÿôêÿùðÿúóÿýöýÿùûÿúùÿúöÿøòüóîøïÔüÚÎóÒÊëÌÏìÎ×îÒàïØéòÝóöãöõãûõåüõãõìÛíáÑéÝÍíáÑóç×úõïü÷ñþùó\PB\PB[OA[OAZN@YM?YM?YM?WK=VJcî7Uí8IçAEßFAØIAØIAÞFCæAGð;Jõ9JãDI×>AÐ@?ÏJE¾?8²3,ÇD<âTPÜDCáACä>@â>?Ü>=Ô@<ÏE;ÌH<Ç=2Á7,½5'½9*¿=-¿=-»<+½<)À;*Ç;,Î<-Õ;/Û8/à70ç83ë95ã:7â64â22å31æ42ä50Û2+Ò1)É2'Ç9-Ä<0¿90¼5/¿52È<;ÒDCó57î66å61Ø5,Ë5&Ã6"Á9#Ã;#É>'Ê9&Ë5$Í5'Ñ9,Ó;0Ò:/Ï8-Í?1É;-Ä8'Ã7&Ã:'Å<)Å='Æ;&Í>-Í:*Ø>2ãB:Ö.+æ::á14å26Ò73Ö;7ÞC>åJEêQIêSHèTHäUGË?0Æ>.¾<,º<-¶>.³@.°?/®?.«=0«=.¬<.¬<.­<,±=.·A3¼D6ÆLAÞbZâc]ðnlôrrå`cå`eæ`gúixûozõltí`hñ^fÿkqÿw{ÿ{|öpqø^hö@Wý>]óOh懍 •ƒX†aXuE\vIgwP‚ˆfµ±–éáÌÿùéÿüíÿýñþÿóûÿôøÿöôÿóíûìäòãÝëÜÁëŻ㾺޺¿Þ¼ÆáÀÍâÃØæÌãëÓìîÙôñÞøñßóêÛìàÒèÚÍìÜÏñáÔòçáòçáóèâ[OA[OA[OAZN@ZN@YM?YM?YM?XL>XL>WK=VJPI?QI>SK>UL;XM9YM7YM7XM;WK=ULGYSWc_nmkƒtt–|~§ƒ†³†‰²‡Š·ŠŒ¿‹ÈŽÏŽŽÔÕÓ”Ó‹Ê‚‰¿{‚¶u|²ov­gp«ck©€n~ey­ZvÏMoê?cú2Vÿ0Lû6Gð@CâGBÙLB×MCÝIGèCJõÍID¸<4¯5*ÉI@ÕLF×CAÜ>=Ý:;Û;;Ù?=ÔE=ÌH<ÇI;Á7*Á7*À8(¾9(¼9'º9&½:(À;(Ä;)Ê=,Ò<-×;.Ü8.á6.ä6/è5.ê24è.1ê+0ð/2ö37÷69î45æ21Ø/,×31Ô63Ï42Î/3Ð/5Û5?ä=Gõ,2ñ.2è2/Ü3,Ñ5(É8'Æ;&Æ>(Ä9$Æ8$Ë8&Ò:,Ø?1ÛA5ÚB5ÙA6ÎI8ÇB1¿<*½:&Á<)Ã?*Å<)Ä9&Ì;*Î6)Î0'çB<Ý1/ñ>Aå.2à'-Ò3-Ó4.Ö71Ö92Ò8.Í5*Æ2&À1#ÎE5ÆA2¼=.µ:+±9)®:+ª:,ª:,ª/«=.«<+¬=,°?/µA4ÉSGàg^ßd_èkiînoæchðjqõoxüp}ýt~õmwîcj÷dlÿqzÿw|ûsuökpöXfûAYÿ:[õKfâ}…©˜†l”ojŠXo‰ZxŠ`—r¶·˜âÜÂúôÞüúåÿÿïûÿïõÿïîÿëçúäÜïÙÐãÍÉÛÅ«Ù«¨Ó¦¨Ñ¥¯Ô©¶Ô®¼Ö±ÇÚºÒßÁàæÌêéÔòíÚòéÚïáÖìÛÑëØÑíÚÓèÛÒæÙÐåØÏZN>ZN>ZN>ZN>YM=YM=YM=YM=XL@çE@ÝJBÚKCÞHGéBLó8ÏE;ÆF9¿E6Á8(Ã:*Â:*¿:'½8%½:&¿:'Á:&Ä9&Ë:)Ò;*Ù9+Ý7+á5+ä3+ç4-í)-ò)/ù,3ÿ.4ÿ07ÿ18ÿ28ý58ú7;õ8<ò9?ò9Aô9D÷6Gû6Hü5Jø)1õ,2î02ã4/Ø7-Ï9*Í<+Ì=,È7&Ï9*Ø2á?4â>4â?6â?6ÑN<ÍH7ÇB1Â=,¿:'Á:'Å9(È9)Ç3%Ó9/á@8ëD>Þ0/á-.ì38í38×4-×6.Ù80Ø:1Õ;1Ó;0Î:.Ê:/ÖL?ÌF:¿?2´9*¯7)«7*©8*¨8*ª<-¬>/­?0­=/«<+«<+­<,¯>0ÀKAÚc[Ýc^èkiðosëhnõrzüvïer÷oyør{öjsÿlvÿvÿu}öioõfl÷RbÿA[ÿ6YôFaÝt{²›‰€¤~z›f{—f€–h‘u­±ŽÌË­áàÄéëÓî÷ÜåóÙÙíÑÎçÉÅÞÀ¼Õ·´Ë®®Å¨•Ã’”‘˜Ä“¡È™§Ë¬Ë¡µÎ§ÁÒ®ÎÙ»ÙÝÄåãÎìåÕïáÖëÚÒçÒÍäÏÊÞÐÇÚÌÃÕǾ[N>ZM=ZM=ZM=ZM=ZM=YLXL>YNø<=íA=äE?àGBãDHèAKï=Mô:OÒBAÑGDÅA<ÂH=¯;.°5É83È.,Ç)&É.*Í:3ÌC9ÂD6¸@0Ã:(Ã<)Ã<)Á:'À;(Á=(Â;'Ã8%Ä6"Ê7%Ô8)Ù7*Ý5(á3(å3)è3*û03ÿ58ÿ7<ÿ38ÿ,2ÿ&-ÿ'-ÿ)1ÿ,3ù'0ô%/ú'6ÿ+=ÿ(Aÿ:ú2ö".ô&0î+1æ0/Ú1,Ò4+Ï5)Ð6*Ô6+Ü90æ>5ì>7ë:4é61è50é61ØL?×K<ÒF7Ê>/Ä6(Â3%È6)Í9-Í5*Ô6-æC<à74à21Ò ì89ê35Ó2(Ô3)Ò4)Ñ5)Ï5+Ì5*È5+Å7+ãYNØRFÊH;¾@4¶=ê@AéBIêCMëANê>NÌA<Å@9¾?6µ?3®=/±=0¿E8ÒMDÇ61Ô;6Ï1.Í2.ÖC<Ç?3´6'·?.½6#Á:'Ã<)Â;'À9%Á:&Ã:'Ç:&Ë:'Ð9(Ô7(Ö3$Ú."à/%ì7.ô=5ø72ù30ú.-û)(ý%&ÿ#%ÿ"'ÿ"'ÿ$*ù )ú!,ÿ%7ÿ'<ÿ;ÿ4ÿ3ý)7ð".ç"+ä*-Ý--Ó+(Ò-)Ü41â62é54ï64ó55ó12ñ-.ï+,í++Õ<4Ò91Ñ:1ëTK»"Ä+#ßF>È.&Ì/(Þ<7èE@â:7Ø/,Û.*ã41é:7Ý?3×;.Ï5)Ë3&Ì5*Î:.Ë;0Æ8.ìbWàZOÈD8¹6,º:/·9-¯3)²6,¯1%°2&®2&®4'¯7'²:,²<.³=/°:.ºC;Ö\Wìppñsvøv~ûyƒõq|ÿ{„ûx€øu}üs{ÿr~ÿq}ÿlxûisøbmôI\ÿ=\ÿ8[ñ:VÖek²–‡¦}~¡i|šd}•c‡—j”ŸuŸ¥ ¨ƒœ¨„’£Š£|€Ÿvx›qw›o|r t„£w¯uƒ³y‰¹½„“¾†—¾‡œ¾‹¢½§¼“¯½š¾Â§Ï̹ßÓÇãÒËÜÇÄÖ¾¾Ê»´Á²«¹ª£ZM1ÐB6Ü?6è?8ôA=ö=;ø:<÷:@ô7½=4¶<1°õ6;ú3:û06ú-2û.3ý14þ36×4/Ü:5Ù72æDAæDAÎ/+Ñ2.Á"Ö41á?<èE@à=8Ø3-Ù2,Ý60à91Ò<-Ï9*É5'È4&Ê8+Ë;0Ê<2Æ9/ícYáXNÉ@8¼3+À:1Á;2½7.À:1Á4+¾4*½4*»5*¸6(´6(²7(°6)´;0»B9ÓYTèllïqtöw~þ|†øv€ÿ|„ûyøv~þuÿsÿo}ÿiwùeqùanöI]ÿ<\ÿ9\ô=YÕdh«y€œsu˜`t’\w]cŠ•k—p‹•p…”mp†_lˆ_fŠ\g^j_q•ey›i}l€­r„²tŠ¸z»}½‘½‚–½„›»‰›µ†¡³­¶—¾½¨ÏÆ·ØÇ¿ÖÁ¾ÒººÅ·¶º¬«²¤£\L<\L<\L<\L<\L<\L<\L<\L/ÇE5ÐG7ÚC8ä?9ó=<ú9>ü9Aú:Eò>GæAH×@EÏ@B¿<4¸90±8-«:*¨9(«:*»?3ÏF<ÙD>Ø96Ú65Ü:7ÜC=ÝOEÍI<²4%À9&Á:'Ã<)Æ=+Ç>,È=*É:)Ì9)Ï8'Ï2#Ó/#ß4*î=3ô?6ñ91í2+Ú7&Ý6&à3#å/"é-"î+%ñ,&ò+(ó++ð(+ò'-ú(5þ%8ÿ5þ2ÿ3ð(5ô.;ô4?ò8Cï;Dðå+6ñ1<ô/9ù-8ù+5ù,3ø-1ö.1ö01Ù1.ä<9Û64à;9ÿljæBAÒ.-Ð.,Û97á?<àA=Û<6Õ7.Ô6+Ô6+Ó5*Å8&Ã6%Ã6%Ä8)Ç;.Æ<1Æ<2Å;1ëaWáTMÉ<3¿0(Ë;3Ï?6Î;3Ñ>6Ú=8×<7Ô=4Ï<2É;/Â:.»7*¶6)·;/»@8ÏTMãgeíorøz~ÿˆý{…ý{ƒùzúx€ÿwÿsÿl}ÿftøbnø]kõG^ÿ:Zÿ9\÷AZÐ_c›gkŠ^e†Oh…Ol„Rt…X{ˆ\}ˆ^x„\q‚X`yO_P`†UeYm•`uœg{ j€£m­p…±tˆ¶v‹¹y‹¹yŒºz‘º~”º‘±•¬€›©†©­’ºµ¢Ç¹°Ë¸²Ì´²¶­®ª¡¢ —˜[K;[K;[K;[K;[K;[K;[K;[K;ZJ:ZJ:ZJ:[K;[K;\L<\L<\L<]K=]K=]L<^M=^M;^O<^O<^O<`P@^Q@]P@\NC\NE[NF\OI]PJ`NdcSmfX{g^‰ohœzu¯„|¸†{µ™…º¥…´¯€ªºy¡ÈxŸÓušÍc‹¾OyêAFà@@ÕA=ÌF;ÈJ;ÉJ;ÐF9ÜB:î@?ø;Aþ:Dü7õ>8ð50è-&×:)Ú8)Ý5(à2'æ/'é.'é,(é,*ç+*å(,è)1ï+7õ';ö";ú=ÿ"A÷8Gä(6ç/;ÿP\ÿ`lÿP\ò^N>^N?^N?_OB`PC`OEbM\cPdcUodZle‘vr¤~w«‚v¦“~©¬†«Â‰©ÐžÛw“âk‡ÝXuÓFfÿ=MüDPðJNÞJHÌG>ÇG<ÍG<ÙD>èBBó>Cù>Gø@HðCIÞDDÍB=À?9½A5µ=/®:+ª;*©:)­9*º<.Ì?6áFBä<;ïABíAAÞ:8ãJBæXLÔL>È@0À8(»3#Á8(È<-É:*Ë7)Ð8+Î0%×3)à8/é;4ï:3î50ë0+è+'Û4,ß4-ä2.ë31ð43õ45ö58õ6;é/4ç.6ê0=î2Cò.Fõ*Gý,Lÿ1TðPî3Dî2Aî3>ê5<æ89Ü73Ð3*Ç/$Ì2*È-(Ñ61óXT÷\ZóXVÜ@AâHHÜB@Õ<7Î70Í6-Ï8-Í9+Ê7'Æ3!³:%²9$´;(¸=-¹;-¶6)»8.Ä>5ÛNGÙEAÎ50Ð1-á>9è?:ã81ä71ð/0ï11ì42é73â92Ø:/Ð9.È:.¾6*º7-ÈIBÜ_Yënlû}€ÿ…‰ýƒõv}õx~ùzÿx‚ÿsÿj{ÿdtö_nðUeôF]ÿ6Vÿ7ZúF_ÀTRvaBJoRÿ-Hÿ:QþCTéDKÒ@AËA>ÎDAÖEBãEFêAFï@EïBFçDEÚEAÉC:¿?4º@3±;-©8(¨9(©:)®9(º:-Ë;3èIEë??î;>æ68Û2/ÞA:îZPõg[ÙQCÉA3¾4'À6)Ç9+Ê8+Í6+Ò8,Ñ0&Ü5-æ;4ë:4ê40è/,ê-+í-,ó4;õ3;ø3<þ2=ÿ1>þ0=ý0?ù0@ô1Añ2Dò5Kó5Oó0Põ-Qþ1Xÿ:dá7B÷O\ÿanÿ`nþXfùQbòEXé8Jó@Sê:GÝ2;Ò/2È3-Á9-º=+µ>(Æ9/¿2(ÙJBúkcÝLGáPMÍ<9Ï;9àLJÔ@<Ê7/Ê7-Î(«;%­=)²?-±9)®4'º:1ÊC=ÕHAØC?Ô72×2.ç;7ì:6è2.ë2-÷)+÷+,ô.-ð3/é61â:1Ú<1Ò>2Â6)º4)ÅB:×XRçjhú|}ÿ†‰þ€„õv}öyú{‚ÿx„ÿqÿh{ýbtõ^oîSe÷I`ÿ9Xÿ9[ûI_ºQNmZ:Em8ZvCa|InSv†Y|‡]Šbg‚—lœl{ m|¤o}¨p~ªo‚ªnƒ©l…©lˆ«qˆ®qˆ°r†³r„³oƒµn„¸p‡¹t‹µv‰¬tŒ¦wš¨„°´™ÈïØ̾àÏŽÃÓ«±Á›¡±ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:\M:`J<`J<^K<_L=^M;_N<_N<^O<^O<_P;_P;aPHÿ$Hÿ0Qÿ;UñÇA6¾>1·?1¯9+¨7'¨:)¬=*²=,À>1Ñ>7ß=:ç79æ/3ã/0á32Û94åNEülaïj[ÙQCÆÍD>Á61É;7ãUQÕF@É91È8-É:,È9(È:&É;%ªB)¦<&¦<&¬=*©8(¬3(¼=4ÒMFÕGCÝEBÛ96Ü30é73í41ì/+ó2-ÿ)/ÿ*/ý--ö0/ï4/è7/ß;1Ø>2É:,¼4(À;2ÏNHßb^÷yzÿˆŠÿ„†ùzú}ƒü}„ÿx„ÿn~ÿdwù^pò[léN`öHaÿ8Wÿ7YøH]²JGcS1Al6ZtDf~NuˆZŽc…f‡’jˆ—n‰žs‡¤t‚§t§r}¨p}©n©mƒ©l…©k†§n‡ªp†¬o…¯o°l³k‚¶n…·p‡´s‡­rŒ¨wœ¬…²¹šÈƱ×οÞÐÅ·¿Ò¤¬¿’š­ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:\M:`J<`J<^K<_L=^M=_N<_N<^O<`Q>aR=bQ=bQ=bR;bP:aO9`N8jNMgNRbQ[cWkjfuv’}}™y‘’{¯ŒËƒ‡ã{|ùqsÿgjÿTXÿAGÿ#Mÿ.Tÿ7Wù9Pé>NàEM×EHÑ?B×BDÚACÜ@AÛA?ØC?ÏB9Å?4¿=0·?1¯9+©8(«=,°A.·B1ÇC7×D=Ú64å57ã,0ç02è88Ó0+Ï5-éUKÿznæ^RÎD7É=0Ê<0É6,Í6+Ö90Ú70ß82ä71ç40é1/í10ò53ø87ÿ=ÿ>ÿ>ÿ>ÿ=ÿ=ÿ<ü=ò:ï@ð$Ið&Nï$Qó%Uÿ0eÿ=sÿgrþalôXeîR_ïQ`îM]â?RÖ1Bß:JÑ4?¿-0±-(¦5'ž>&–C%E"¯7&²9(ÒWHº<0ÁA8º7/º3/ÍC@ãXSÕHAÈ91Ä6*Å6&Ä5$Ä6"Ç9#¦B*¢<%£:%§<*¦7&©3'½A7ØSLØIEáGEÞ:8ß2.ê41î1-ï.)ù4.ÿ'-ÿ',ÿ)+ö*)í-(ä1*Ü5,Õ9-Ð>1½3(¼7.ÉHBÙ\Xôwuÿ‰‰ÿ‡‰ý~…ý€†þ†ÿx„ÿl|ý`sõZlïXiãHZóE^û4Sÿ3RóCX«E@\L*?j4Uo?d|LwŠ\†“h‹–l˜pŽtŽ£xŽ«{†«x©t|¨mz¦i}¥g¥h‚¦h…¤k…¦m„ªm‚¬l®j}±i€´lƒ·oˆ·sˆ°tŽ¬xœ®„²¹šÄ«ÐǶÖÈ»²½Óž©¿‹–¬]K7]K7]K7]K7]K7]K7]K7]K7^L8^L8^L8^L8^L8^L8^L8^L8\J>]K?]M@\L=ZM=ZO=\Q?^SA_T@_R?^Q@aQAcRBdQCdNAcM@pKEjKIfOUgZknl„v|ž}†¯ƒŠ´Š…®Ÿ‰­¸Š¦Ìƒ”Þ{~îumøl]ûfRðN[æDQä>LéANïCQí>Ké:Gê4Á;/¼8+ :$¬C0¬=,®6(Â?5ÑD=Ð;5Ó61Û83Ü71Ý6-Ý7)Ü9(Ý='Ù;"Õ7à74õPLõXOÛD9Ç8(Ì?.ÒC3Ñ;-Ò4+ðGDâ.1ï4;ö4?ï+9ÿ@Qí(9þ&+ÿ*-ÿ*-÷"û#$ÿ()þ((òð"ú+1ì )î&1ò.<ç$5ÿYnë+@ÿ`jÿ^iÿYcûT[öPTìHIÛ@;Ê:1ÅA2½F2®D.Ÿ;$”5–7#˜;)œ=+§81«83ÁEC¿;9¾23Æ45È44×CAÜKFÚKEÑD;È:0Ä4+È4*Ì3+Ì2*·?1³9,®.#­'¶,"Æ7/ÓC:ÚG=äPFßE;Ù80Ü1*ç/-ô01ý/3ÿ.4ò14ó12ô01ó/0ó0.î1+é4+à8-Ö=/¾2#¾?0·>3Õ`Wçtqÿù…†ôŠŒþ…Œÿwˆÿe}ÿ[wÿXuÿSoûJgûDcö7Y÷9]ç>[Ú]k„C=PI/F`;Xw^N?^N?[N>ZO=\Q?^SA_TB]QA]P@_OB`NBbPFcOFcOFkLGjMOgS\h_rnoŽw~ª~ˆ»…ŠÁ›–Ì¢Œ»«£»wŽÕx‚í|x÷uhöjYüZgóN\ìFRòHUöJVõERï?Jë;Eä9Aà:>Ú::Õ=:Î?7Ç>4À+ª?-¨9(²:,ÁA6Å<4Ç7/Õ<7Ó40×4-Ø4*Ø4(Ú7&Û:&Û;%Ù;"Þ52æA;ëMDàI>Ð>/Ç8(Ê8)Ó;.Ý<2öJFæ/1ò5<ø6Aò.<ÿ?Pì'8ö$'÷%(û),ý+,ü*+ù'(ø((ø*,ð$'í%(ê%,þ:DÚ'ð4CüATÞ#6ÿluÿblþZcüW]õOSæBCÙ;8Ñ>6¾8,¾E4¹H6¨?,–1)Ž()ž-'°:6ÑTRÎHGÃ54Æ45Ò<=ëWUØGBÖGAÏB9Ç9/Ä4+Ê6,Ð7/Ò5.Â?5À:1À5.Â3+É4.Ð83Ø?9ÞE=ãJBÞA8Ù6/Ü1*æ0-ó11ü03ÿ.3ò14ó12ô01õ/0ó0.î1+é4+à8-×>0¿3$¼=.¶=2Ó^Uévsÿù…†õ‡Šþ‚Šÿu…ÿe|ÿ[vÿWtÿQoþIhúAaö8Zö=_æF`ÅQ\{?7NH.Ga>Yx=e‡Ks•Yx›awbz¢f|¥i}¦j|¥i|¥i|¤h{£e{¡d}¡c}¡c¡d{¤l}¦n}©l}ªi}ªe}­c¯c‚±cƒ±f‡²k‡¯pˆ«u‹«|¬„©‰‹¤†z…‡doqR]_]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8^K<_N>aP@`P@]P?[O?[O?[RC[QE[QE\OF\OG_PKcQOfTRhTUiTQiVXi]kmi„sv¡zƒ¼ŠÍ‰Ö—‘ÙŸ‹Êª‚¶º}ŸÒ‘烅ð~tïveÿ`k÷S\íGQðFQöHR÷EQô@Kî=Gå6=à7:Ù99Ô<7Í@7ÅA4½?0¸=-©@-¨=+ª;*¸B4ÅI?À;2»0)Ì92Í6/Ò5.Õ7,Ù7*Ù7(Ú7$Ü:%Þ<'ß3/Û4.âA9éOCÜH:Ç6%Æ3#Ù@2á>5õHDé13ó4;ú6@ø4@ÿES÷3Añ),í"&î#&û03÷--ï''í%%÷12ì(*ø7:è+1â)1ë3?ÿR^ï=KÿYiúafñV\îOTðMRêEIÞ:;Õ74Ô?9À6,¿?2»C5²>1ª8-¥3)Ÿ,%œ' ˜% §0*ÆFCÂ::¼,,È44×ABô^]Ò>:ÒC;ÐA9Ë=3Ì9/Ô=4Ú@8Ý@9ÙA>×=;Ü>=ãA?ã?>à;9ã?=ëIDàA;Û=4Ø5,Û2+å2-ð31÷12ú/2ó04ô02ö01õ/0õ/.ð0+é4+à8-Ø?1À4%¸9*´;0Ð[Rízwÿ’’û‡ˆøƒ‹ü~‰ÿr‚ÿcyÿZtÿTqÿMmÿFgü=_ø:^ôBbåQg§?Fn<1OK2KcA[z?h‡Lr“Zu˜^tš_wŸc{£gz£gy¢fy¢fy¡cx byŸb{Ÿa| b}Ÿby¢j{¤j{§h{¨e{©azª^|­^®`…³hŠµnŠ²s‰¬t†¦w‚žvy“pn‡gVb`COM4@>^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^L6`N:aP<`Q>]P?ZN>YPAXPEXOH[RM_UTcWYeX_iYcl\fm]hlbclemolrtšx¶~†Ï„ŒßŠŽç‹‡ÞŠÙ¬‰É³­½y’Í{ßyê†vÿnrÿbgùU\öLUöFPöBMó>Gð;Dæ5;á7:Û97Ò=7ËA6ÄB4»B1·?.©;,­=/¯>0»G:ËRGÇH?¹6.º1)È91Í81Ó;0Ú<0Û;-Ù6%Ü6&à9'á40Û2-à=4ëOCãK=Ñ;,Ð8*àB6Þ7.ð>:é/0ò16÷4<ü8BÿNZÿKWý>Cò38â$&í/1ê,,ð22ç+*é0.ò::Ñæ37Ü-2ç9BïENÿYcôLYÔ?AÚADßCFá>CÞ9=Ü89Ø88Ó:5É83Â91½:2ÀA:ÍNHÖVSÐNNÆAB¯82µ:5ÏKGØNLãQRïYZêRQñYXÉ51Î>6ÑC9Ð@7Ó?5ÚA9àC<àA;íCñ:?é58í=?øLJà93Ú70Ø4+Ü3,ã5.ì30ò21ô01ô04ô02ö01ö.0õ/.ñ0+ê3+à8-Ù@2Â6'µ6'²9.ÉWMî}yÿ“’û‰‰þ€‹ý{‡üoücwÿXqÿNmÿFhÿ?cþ8\ù=`íIdÙYhˆ25d<0SQ8TgG`}Ej‰Ps’Yt•\u˜^wby¡ey¢fw dv awŸavž`xŸ`zž`{Ÿa| by¢hz£g|¦fz§bz¨_z¨]|«]~­_†²eŠµmŒ³rŠ­s†¦u€œstŽii_RaZDSL8G@^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;_K2_M5aO9_P;\O>ZN@XPEXQKYQO^X\g`hnfsshysg{sg}tfnnzor…rw•v|¬y‚Ã~†×ƒŠåˆ‹ì’ë›ŒßžƒÆžt¢¡kƒ®mq¾vjÈ{iþllÿklÿfiÿ]`üQWöEMð;Bí5=è59ã68Ý98Õ>7ÎA7ÅC5¼C0¶A-¬8+´@3¯;.°;1ÇRHÓ]SÈNCº;2¾90Á7,Ì9/Ö>1Ý=1Ú6*Ü4'á7(á2-ã60ä=5åE9âF9ÜC3ÝA2á?2Û0&ì62ì0/ð-1ò-4ú7?ÿOYÿZdÿ[_ÿOSá.1ã03ß--÷EEè66Ü,,Û-.ë>@Û25Ù37ÿchÞ=CÊ*2Ê-4¾()Ô;=àAEÚ7:Ù37á8;Ü89Î..Ì43Í<9ÓHEÝSSì`c÷hnõdkî[e¿B<ÆE@å^[÷igÿopÿjjåKK×=;É4.Ñ>7ÕE<ÖC;Ó?5Ö<4Ø93Ø7/ö0=ò,9ó+6õ-8ò*5î+3õ8<þJKà3/Û4.Ø4+Ü4+â5.ê40ï4/ð3/ö/4ö/2÷/1ø-0ö..ñ0+ê3+â7-Û?2Å9*²3$±8-ÃNEî}yÿ’‘üŠŠÿ}‹ÿw…ùl|öatùUmÿHgÿ>bÿ8_þ4\õ@aâMcÂWap/+\A0XX>]lMbIl‰St’\u–_v™_xžcy¡ex buŸ`uŸ`u_vž_wž_zž`{Ÿa| by£d{¥f|¦dz¨`y§^y¨Z{ªZ}¬\€¬_…¯g‡®m‡ªp…¥sƒ t{•nrŠffvi[k^RbU_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<`L1aM2`N6^O:[N>YOE[RMZTT_ZahbprmzuŒ{t“yr“zp“yo”ov’pyšt}¨w€·zƒÈ~…Õƒ‰á‹‹å”ã—ŠÒ™„¼¡ƒ§ª„“«~yŸl[ŽX>ÈH?ÕPIäVRìVUòRRôJMî=Cè38ì7<ç9;à;9Ø=8ÑA8ÈC4¿B0¹@-³9.ºA6«5+£.$¼J?Øh\×eZÊVI·=2¸6)¾4)Î:0Ù;0Ü5,ß3)ä6+á/+å61ã;2Ü:/Ü?0ãF7ãC3ß9+ß1&ê3-ð31ï-.î*.ô17ÿEJÿS[ÿ_dÿ\aâ9<â9<Õ+.ôJKâ89×//Û55Ì()Ë(+÷YZÛ?BÔ9=Ð7:· %Ã))Û=>åBEÝ49Ù,2Þ17Ú/5Í(,Ò37äKNöaeûhnùcl÷_kû_mý_nÒNIÔOJè]ZêVTçMMãGHÑ32Î31ÙA<àKDãPHßKAØA8×:3×50Õ2+ÿ,;þ+:ü(7ø%4÷'4û/:ÿ=CÿILà1.Ü3,Û4,Ü5,á4-ç4-ì5/ï4/ö/4÷/2ù.1ù-0ø..ò/+ë3+â7-Ù=0É;-³1#°7,¹D;ìyvÿþŠ‹ÿyŠþqõhxó`söTlüCcÿ7^ÿ3_ÿ3\óDcÒM^ JMb6+TE0W[@^kMc~Kk‡Tt‘[w•_x™`{ždz cvž`s›]s›\s›\tœ]v^wž_{Ÿa| by¡bz¤b|§b{¦_x¦[x§Yz©Y{ªZ~ª]ƒ­e…¬i†ªm‰§s‰¥u„s|•mv‡unmfwe_P=_P=_P=_P=_P=_P=_P=_P=^O<^O<^O<^O<^O<^O<^O<^OÏcWÔh[ÔfYÁPB¹?2¹5)Ç7,Ô:0Ù5,ß2+ç6.ã0,ã4/â7/Ü8.à>1åC4â?0Þ4'æ4*é1)ò2/ð..ï-.ò14ô68ü?CðOTúY^éFKõRW×47ëFJÝ8<åBEÚ7:Î.0Ð15ãIKÑ8;Î8:¸#%Ñ<>Ü89ä;>ê=Aç6<â-4Þ)2â19çÿ/>ý)7ÿ-:ÿ9CÿAHûABã1/ß4-Ü5,Ý5,á4-æ3,ì5/ð50÷.4ù.2ú.1ù-0ø..ò/+ë3+ã7-Ø:.Ì>0´2$±7,±<3çtqþŠŠþŠ‹ÿr†ýj}ñbtð]pôRjûBbÿ6`ÿ5aÿ8_ïKfÁN[z;6Y?.LH/TZ@]cIbzJj„TrŽ[v”^yšc{ždxžas›\p˜Yp˜Yq™Zq™Zt›\uœ]y_zž`x¡_y¢^z¥^y¤\x¤Wv¥Uw¦V{§X~ª]‚¬d„«h†¨l‡¥o†¢r€šmx‘gr„lk}ecu]_O?_O?_O?_O?_O?_O?_O?_O?^N>^N>^N>^N>^N>^N>^N>^N>eQ6cR8aP<]P@ZPG\TR_Zab^otrŠyx˜€¨ƒ°~~²yx±wv°xw³t}Âw€Ã}…Æ‚ˆÆ…ŠÂÀ—–¾ ¼¬§»¶¬´¾³¯È¸©Ð¿¥Õ¡ϼ”Dz‡·kS®\F¤G5©=0ÂH=áVQðVTòNOì?Aë=?è<<ä<;ß=:×=5Ï;1Ë8.¿82Á<5¹:3·>5ÀPDÅYMÅ]PÎgXÐdWÁM@º:-Å8.Ò91Ø3-ß2,è50æ40á2-à5-ã<3çC7æC4â:-à3%ê5*è-&ð0+ð.,ò21ò44ç.,è00áEIõY]öW\ÿpuåDJéHNÞ=Cü[aÿouÝ>Cÿ~‚ÿmqêQTÔ>@Å02Ñ<>øEIî9>ð7=ø=Fô6@è-8ö>Jÿ\hÿmwÿitÿdl÷]gú^kÿapÿ]nüWhî_YãOKâJGÕ74Ò0.Ù54Ó/.Ø95ßD?ãJDáJAÙ@8Ó6/Ö5-Ü71â94ð$0ý/<ÿ1=ø*6û/:ÿ>Eÿ>Cì44â3.Þ5.Ý6-Ý5,á3*è3,ï4/ò5/÷.4ù.2ú.1ù-0ø..ô.+í2+ä6-×9-Ï@2µ1$²6,°7/èpoþˆˆÿŠŒÿkƒücxð]pïZnôPiýAdÿ7aÿ8dý=bæPi°QW^2'RG3DH/PV`P@`P@_O?_O?_O?aQAbRB_O?]M=]M=aQAcSCbRB`P@eS;aP<_O?^QH[QOZSZeapsq‰xxšz|¥~€±€¹}¼xy¹rs¶no²qwÏv{̓̋È–—䤾²±¹½¸²ÌŲÓÍ­ÙЩÛУÛÑ ÝÑ¡Ø̚ÒƔզŠ·gŸ_FËzgØte¾G?ØQMøbaìILç>Aä79æ9;ã99Ü75Ù61Û94È95À50ÇB;¹=5¾I?ÄXK·PAËeVÎdVÊYKÃG;Ä:/Í6-Ù6/â5/å3/á/-ß2,â70ä=4à<0Û8)Ý5(å8*å/$ê/(î.)ð0-ï20ë40è51æ40Ó8<åJNõY]ëOS×7?×6>ùX`ÿ~†ÿ~†ÿowÿgoÿipÿfjõ\_ïY[ô^`ÿRYÿCKü8Bü7A÷1>ï+9î/>ñ=IÿS_ÿ`kÿgpÿepþboÿbpÿ`oÿ[lìTOßFA×85×31Ù10×/.Ú21Ü86áD=ÜB:Ø?7Ö<4×90Û81á83ä84ô5=ó4;õ3;÷4<ø5;ó49ë33ã1/Þ3,Ý6-Þ7.à5+ä3+é2,ñ1,õ2.ø/5ø03ú/2ú.1ù//õ/,î3,å7.à@4Ë9,½7+®/&·<5ÒXWÿ˜šù~ÿhÿe|ö]rîRhòHeÿAeÿ9bÿ5`üJlÕRd‰==K. >>&?I.IO5]]EWlAcxMqˆZx’by–`t•\r–Xq˜Wl•Sm–Rn—So˜Vr™Xt›\uœ]uœ]tœVtWv Xw¡Wv¢Uv¢Uu¡Tt S{¥[{£\zŸ\u—Zn‹Uc}MXrCSj>AW1?U/`P@`P@`P@_O?`P@aQAbRB`P@_O?`P@bRBcSCbRB`P@fVF_QD\OF_TRcZ_f`nmkƒwv˜wy¢{}°}¸x|»qt·lo¶ln¸oq»suÙ|}ىˆÔ˜—Ш§Æ¹¶½ÉƵÓÏ©Ý×£âܞçߞæޝäܞâÙ ÙҜÑʖѼ¸€¦~dċwÉ}m¶VJÓ`Y÷qnîZZêJLä>@é<>ì>@è:;ã56á34Õ=:Ë73Ê?8¹6.·>3¼L@³I;Å^OÛp`ÒaSÄH<½5)Ä0&Ö5-Ý4-Ü/)â43å95å<7à<3Ü8.Ù5)Ý5(ã5*í6.ï4-î1+ë0+ç0,ã2,á4.Þ5.Ò9;×>AäIMóW[ü\dü\dþ]eÿ`kôR]ïMXñQ[ÿ_gÿjqÿflô[`ëRU÷07ó+5ô+5ù-9ó&5è/ç'6í7DüP\ÿ[dÿclÿemÿepÿdoý[hõP^åFBÞ<9Û64ß63á53Þ20Û2/Û62à>9Û>7Ö<2×:1Ú91ß82å95è96é9;ê7:ë7:î79î79ì57å31Þ3,Û4,Û7-Þ7.á6,å2+ì1*ó0,ø1.÷05÷03ú/2ù.1ù//õ/,î3,ç6.ß=2Ò>2Â8-µ2*·82ØZ[ÿ“õw{ÿa{ÿ^v÷WqöOkøFfý=bÿ:cú=cëLhºJVw<8F5#7=#9C(DH/UP`rJnƒXw_v“]t“Zp”Vn•Tk’Ok”Pl•Qm–Ro˜Vr™Zsš[sš[tœVuWuŸWuŸUtžTržQqPq›Qn˜Pl”NhŒLbFXu?Nh8F]/@W+@W-@W-AX.YL<[N>^QA^QA^QA^QA_RB`SCaTD`SC_RB`SCaTDaTD`SC^QAbUM^QK[QPcYakesqm„vu•y{¤y{®y~¶w}»ns·ei°bf°jn¸rvÀ}zᇃᖔߩ§Ù¼¸ÏÍÊÃÝظçá­êå¡ïéŸðêžíæžéá¢âÛ¤×Ï ËĘ´°“¦œ˜„k§„p¥p`œRG»]UÞmi÷usð^_çHLæ@Dí@Dí=@ë7:ç36Ü>;Ô;6ÔA:Â70·7.µ?3­=/µG8Új\Þj[×\MÊB6Å2(Ñ4+Ú6-Ú1*Þ44éA>ìGCà=6Õ2)Õ1'Ú2'Þ0%è3*é1)ç.)æ/)ã2,â7/á=4âA7Ã-,Ê43ÜCEðVXú^bùYaóS]òP[èFQêHSðNYü\fÿmvÿmtôY_ÜAGó*2õ,4ý1<ÿ1>÷*9ï&6ö6EÿJX÷ISõOY÷W_ü_fÿdkÿai÷Q[éBJÞ95Þ63ã75é<8ë<9ç85â51Ý60Ý:3Ù;2Ö90×90Û81á83ç:6ì:8à;9â:9ã99ç98è88å84à40Ú3+Ú6,Ú8-Ü8,á6,å3)ì/)õ/,ú0.ô15õ13ø02ù.1÷//ó0,î3,ç6.Ý9/ÛD9Æ9/»4.´0,â`bÿƒˆônuÿ_zþWsúPmþLlýDfø8_ö9_ðGf×ReDJi=4K@,7@%8@(ED/LE2N^9YkEg|Qr‰[tZqUmRkMi‘Kh‘Ki’Lk”Pm–To–Up—Xq—ZuWuWtœUrœTpšRm—Mk•Kj”LdGaˆE\~AUt;Li3E_/AX*>U'B\/E_2Ic6WJ:ZM=\O?^QA]P@^QA_RBaTD`SC`SC`SCaTDaTD`SC_RB]P@YNR[PVbXcjcsqm†vu•xz£z|­w|´sy·mr¶bi±]c­ag±lr¾v|ȋ‡æ”‘褡淴áÇÄ×ÕÒËáÞ¿èå²ëç¨ïê¦îé¥éã¥ãܨÛÒ§Ëß¾µ–Ÿ§˜š…‰v—‚q—se™cW³i`Ïrmû‹‰õutë[[çKNéCGî?Dî;?í8=ß:8Ý;8ßD?ÓC;Ã:0¹;/¯7)¦2#¾J;ÚbRék]ÛSGÉ9.Í3)Ö5+Ø4+Ù33ñMLý[XíKFÙ80Ö3*Û4+Þ2(à-&á,%á,%ß,'Ý0)Ú6-Ø<0×?2À0(Ä4,Î:6ÙCBßFHàEKäGPìLVñQ]öVbøXdû[gÿgpÿmuôY_Ø=Cñ.2ò-4ô-4ò*4í%2ì(6ûô@?ð<;ç85à72Ü92Ø:1×90Ù80Ü71ã73ê86ì87Þ<9ß;9â:7ä;8æ:8ä84Þ5.Ø4+Ù7,Ú8-Ü8,á7*å3)ì/)ô/)ù/+ó25ô23õ12÷/1÷//ó0,î3,ç6.Ü8.ßG<É90¾3.´-*îfjÿy€ójrÿ`{ýTqþKkÿFjÿ=cö3[î<^äPhÄXe…DBbE7WP=DH1@D-JH3JB/IW4Sc?btLmƒUp‹XoŒRkŽNiŽKgIg‘Ih‘Kj“Mk”Pm–To–Wp–YtœVs›Uq™Sn—Qj”Lg‘IeŽHdG`‡D]AWy=Rq8Mi6Lf6Ne7Pe:Lf6Oi9Sm=UH8WJ:[N>\O?]P@]P@_RBaTD_RB`SCaTDaTD`SC_RB_RB_RBTLY`Xgnf{tp‰xt•xw¡xz«y{´sy·jqµ`g¯\b¬`f°kq»v|Æ~„Ε”äžžè­­é½¼æËÉßÕÓÔÝÜÊãàÁåâ¹çã¶æß³àسÚÑ´ÐůÀ´¤¯¥™”œ‰ˆ†y‰}qwk›sk§ngºoi扄î~ósróedòVYòLNðCEî>Aå95â:7äB=ÞE?Ì<3Æ=3ÂB5­1%¬1"ÇI;ÛYKÖN@Ì=/Î8*Ò6*Ñ3'Ö34õUUÿkhú]XâE>Ü;3ß;2ã80â4-ä1,â1+Ý0)Ö/'Ì0$Æ/$Â0#Ã9,À4'Á3)Ë:5×CAÛEGÛBGÛ@HàDOìOZóVaòVaú^iÿgoóYaÝDIð88í55ï26ð18ò3;÷9CÿHSÿVaä6?Ý4;Ý7;êAFøKOüIMô;@ê05å61ë95ñ;8ó;9ó;9ð:7é73â70ß;2Ü;1Ù;2Û:2ß82ä73è64ì65á<8ã;8ä;8è:9è;7æ95á6/Û4,Ú8-Û9,Ý9-á7*å3)ë0'ò/)÷0+ð45ñ33ô22ô01ö0/ò1,î3,ç6.Þ7.ÞD:Ê7/¿1-¾21÷jpÿrzøhrû]vúPmÿCfÿ_L;_ZFQP;KI4PI6MB0DR1M[8[kFf|Nm…SmŠPlŒMhHfŽGgHg‘Ii’Lj“Ol•Sn•Vo•Xt™Vq˜Un–Pj’LfIcŒFaŠF_ˆDZ@X|?St;Pn8Pj:Tk=XmB[pEUp=Vq>Wr?RE5UH8XK;ZM=[N>\O?^QA`SC`SCaTDaTDaTD`SC`SCbUEdWG]Ulje|yu}yœzy£wyªvx±sw¶lqµcj²[c¬]e®hp¹w}ǁˆÐ†Õ™Ü¡¦à¯²å»¿åÆÇãÍÏÞÔÓØ×ÖÑÙ×ËÙÕÉ×ÑÅÒÉÂÌÂÀŹ»´§®¥˜¡‡Œ†xzuwvqulg~mfŒoib[œa[¾sm×zuï{ü|yÿrpýccöSTîHHñB=ê>:ã<6àA;Ñ:1ÒD:ÝTJÂ>2¸6)¼:,Â=.È?/ÏA3×C5×?1Ñ8*Ð23èLMú_]ñXSßD?Ø;4Û81à70æ92ç92ç92â92Ú9/Ñ9.È9+Ä8)®)¸3"È@2ÓI>ÒE>Ë;:Ì7;Ð9@Ï8AâHTïUaðYbõ^g÷`iêU[ØCIè?:ë?;ñAAúGJÿMRÿQYÿT]ÿV^á4:Ú/5Ú03ç7:ô=Aù:?ø48÷/2é61ï95ð95í41í1/ê20ç40á4.ã<4à=4Þ=3Þ;2à93ä73è43ë33æ:8ç98ê88ì89ì87é75ã4/Ü4+Û7-Û9,Ý9-ß7*ã2(è0&ï0(õ0*î45ð43ó32ó11ô1/ò1,î3,è5.à90Ù<3Ì70Á0-ÑAAÿnuýku÷coïSkóIfÿ;cÿ1`ÿ3bÿRJ7QF4MB0AL.GU4Sc>`rHgMj‡MjŠKh‹GeFfŽGfHgJi’Nk”Rl”Um“Vq–So”Qj‘NgŽKcŒH`‰E_ˆF_†G\‚E[~DWxAVr?Uo?YpB]rG_tKYtAYtAXs@NB2QE5UI9WK;XL\P@^RBaUEbVFbVFaUE_SCaUEfZJj^Nkg‚up|x›{y¡wx¨vw­pt±jo±ah®^f¯_g°em¶pxÁ~…͉Ø–Ü™¡Ï ¨Öª±Û´¹ßº¿ß¾ÂßÂÄÝÅÆÛÆÃÖÅÁÒÁºÌ¼³Æ»¯Å´¨¾¦˜±—‰¢†‡‰qqstpqogevhe†nj`Y”e_š[T·g`×tnî{vÿ{wÿwsÿhfù[ZÿQKöGBè=6èC=Ø;4ÛG=ê\RÅ;0Ä<0½7+¾6(Ç>.ÑD3ÔC2ÔA1×A0Ò8:Ø>@ÜDCÛC@Ö=8Ó91Ø7/Þ7/å:3æ93å:3â;3Û>5ÕA5ÑE6ÌG8¬.¼;%ÌK8ÑL=Æ=3»0+¿10Ë8>ÕBJáKVëU`ðZeð]eìYaßLRÐ?DÑ4+Ö8/ß<7ê@@ñDFôEJñBIî?Fâ5;ß26ã36ï8<õ79ù14þ-2ÿ.4ë40ð95ò64ì0.è,*è/,è2.á2-ä=5à=4ß>4ß<3ã:5ç85ì65í55ì57ì57í57ï56ï56ì42å2.Þ1*Þ7.Ü:-Ý:+Þ8*á3(ç1&í1(ò1*í55î53ñ42ó11ó1/ò1,î3,è5.ã;2Ò4+Ò;4Æ20çUVÿpxùcnñ[gãKbóEfÿ7bÿ+]ÿ1bÿ@hÞKe­RYd8/ZI7SN:UN;[P>VI8M@0MA1=H*CN.K[6Xj@ayGf‚HhˆIgŠFeŠDc‹BcEeŽHgLh‘Oi‘Rj’Tn“Pl‘NhLd‹Jb‰H_ˆF_‡H`‡H_…H_‚H]~I]yH]wH`wKcxOdyP[vA[vAZu@MA1PD4SG7VJ:WK;YM=[O?]QAcWGdXHdXHbVFaUEcWGj^NpdTvq‘yu˜xvtsŸrr¤su®lp¯bg«Za©^f¯em¸lt½u}ƁˆÐ”Ú•œâš¤ÈŸ©Í¦°Ô¬´Ù°µÛ±µÚ²´ÚµµÛ³±Ö²®Ñ®¦Ë«¡ÄªžÂ¦˜»™‹®‹{Ÿ|y€dbgidhbY\g[[xeauXRe]ˆOHŸVO»aY×jcóvpÿ}zÿwuÿljÿZUÿPJñD>ôMGàB9ßF>êWOº,"¼2'½5'Ç=0ÑE6Ë>-Á2!É8%ÙF4ÞDFÒ9;Ë32Ë62Ó;6×<7Û<6á<6æ;4å82à5.Ø4+Ï5+Ê8+Ä<.Â>/ÑU;ÅI/»='½;+Ã=2Ä;5Â65Â37ÜKRÞLVâOYåS]éWaæU\ÝLSÒCGÉ5)Ð8-Õ81Ú64Ý55ß58á4:ß28å8<å6;ì9=ö8É53øceÿpyô\hêR_ÞHaõGhÿ:eÿ*]ÿ/aÿ@hÓE]–AFQ-!UJ8PN9OH5\O>YH8L<-NB2:D)?J*GU2Rd:]sBcEf†GeˆDcˆBa‰@a‹CcŒFeŽJfMgPhRlPkOfLcŠIaˆG_‡H_‡H`†I\‚G]€H]~I`|Ka{Ld{Of{Rg|S]xC^yD_zEAC8CE:IF=OH@RGAWI@]M>`O=aQ:aS9`T>_VGaZTfaeljwro€wožzt¢~wªzu«ro¨hf¥a`¢^^¦ba­hg·qoÃ|xυ€Ú‰ã—í–ó¢žÙ£ŸÚ¥¡Ü¦¢Ý§¡Ý¦¡Û¥ Ú¦žÙ¥Ö£œÒ¢™Ð¡˜Íž–É—ÁŒ‚´ƒy«mrvghlc_`e[ZlYUtUP€ULVK–RG¨ZN²ZP½\SÔmdç|tò…~üˆðxyõyyæabÜPQ×EEñYVÎ61È1(Ç5(Ä7&Â6%Ã8%Æ9'Ì:+Ð<.Õ?1Ô8+Ö=/Ø?1Ó;-Í5'Í4&Ø:.ã?5à90á90Þ7.×7+Ï7)È;)Ä@+ÁC,Ä;3È?7ÍD<ÏF>ÌC;Å<4»2*µ,$Ä>5ÍG>×QHÞXOá[RßYPÖPGËE<Ìÿ)<ö*6í.6ç48å;;Ü94Ü:5Ý<4à;5ã:5æ93é73é62ì25ì44ë54è64ä71ß7.Ú6,Ø6)Û9*Û:(Û:&Ü9&ß8%á8%â7#â7#í41ï4/ñ4.ó3.ó4,ï5)ê6(å8*à:.Ø7/×96Ý>BÿlyÿasþRlöGdÿIjû5Yÿ5]ÿ;eú=cãPj©LVT)":1 9<)EF4RL>PH;BC39E15K4FGHJ#MQ,U\:\jGcuOf}QeNc…Hb‡BaŠ>cŒ@eDjIl‘Nm‘Qj’IiFgŒFf‹Ff‹Hf‰Ic…Ic‚GdƒJdIc~Gc~Gd€FfFe~Dc|BX}8[€;^ƒ>[K>^M;`O;`Q:^S?^WGa\Vhcinlyrqƒtnšvpžtp¢pm¢gfŸaaŸ]^Ÿ\\¤ed°kjºtrÅ}{φ‚ÙŽˆà”Žè˜’ì›—Òœ˜Ó™Öžš×™Ö—Õœ–ҝ•Ñž–Ñœ”Íœ“Ê›’Ç™‘Ä“‰»ˆ®€w¦tmtkdkf]`e[YiZSoWMzVJŠVI›UK°\RºYRÁXRÓf_Þqjãvoêwý‡…ÿˆ‡÷uuðfdäTSíYUÇ2+Â/%Æ7)Ã7&À7%Á8%Ä9&É:*Ï;-Ó=/Ö8,Õ9,Ó:,Ò:,Ñ9+Ñ9+Ô8+Ø8,ß;1à90Ü8.Ø8,Ð8*Ç:(¿;&¼;%¿4-Á80Æ=5É@8ÊA9È?7Å<4Â91¾5-Ç>6ÑH@ØOGÚQI×NFÌC;À7/Ê8Ñ9"Û8)å4,ï./ö*3û(7ÿ(:ÿ+Bÿ*Bÿ)Aÿ&Aÿ$@ÿ >ÿ=ÿ<ÿ8ÿ9ÿ$;ÿ);÷-9ï29ê7;å;;Ü94Ü:5Ý;6à;5ã:5æ93é73é62ì25í36ë54è64ä71ß7.Ü5,Ø6)Û9*Û:(Û:&Ü9&Þ9%á8%â7#â7#é4-ê3-ì4,ì4*ì4*ë5(æ6)á7*ÞcŒ@eDiŽHkMlPl’IjGhGf‹Ff‹Hf‰Id†JdƒHe„KdIc€HdHeGeGfEd}C\<_„?b‡B69.:<1??7E@:KB=OE/Ô>/Î6(Ë/"Ú:.Û7-Ù7,Ö8,Ñ9+É:)Â9&¼8#¾4*À6,Â8.Ä:0Ç=3Ê@6ËA7ÌB8Å;1Ê@6ÏE;ÐF<ÒH>ÑG=Ê@6Â8.Í6!Ô7&ß7,é3/ñ03ø,5ý*9ÿ*<ü'=ü'=û%=ù#;û!:ü8ü7þ7ÿ6ÿ6ÿ#8ý*;ù1<ñ6=é9;ã;:Ü86Ü:5Þ;6à;5ã:5ç85é73é62ï26î47í55ê65å61ß6/Ü5,×5(Ù9)Ù9)Ú9'Û8%Ý8%Þ7$à7$à7$â4+â4)å4*å5(ã6(â7&Þ7'Û8)Ý=1Ï2+×98ÿltÿ]nþPið=[ÿJlÿ5\ÿ=eü4[ô<`êTq«?Oa#(H1+79+-8'18&:;)B=*A<(@>)@B*?GY`4s~T€Œfw‡bi~Ub|MaI`ƒC`…?aŠ>cŒ@hŽEjJkMlPn”Kk‘HhGgŒGgŒIh‹KfˆKf…Je„Ke‚Jc€HeGf‚Hf‚GeFcDb‡BeŠEhH06*58-;<4A>9G@:KB;RE.Ð?.Ë8(Ç/!Ò6)Ó5)Ô4(Ò6)Ñ9+Í<+È=*Ä;(Æ9/Æ9/Æ9/Æ9/Ç:0È;1É<2Ê=3ÒE;ÒE;ÐB8Ë=3Ë=3ÏA7ÏA7Ë=3Ñ4#Ø6)â5.ë31ò/5÷+6û(7ü)<ù&9÷&;÷&;ø'<û&<ý%<ÿ$:ÿ#:ÿ!7ÿ"7ü%7ù-9÷5>ñ:?ç9:à87Ü86Ü:5Þ;6à;5å95ç85ê65ë54ñ27ð37î66ê65æ72á6/Ü5,×5(Ø8*Ø8(Ø9&Ù8&Ú7$Ü7$Ý6#Ý6#Ù6'Ú7(Û8'Ü9(Ü9(Û:(×:'Ö:+Õ;/Î3.éIKÿo{ÿVjøDaö=_ÿCiÿ/[ÿ7`û=cëLlÆOe€0=G >3--3'+8'2=,=B.B@+C;$G="MA'R_*q}MŸp—¨|ƒ˜mj„W_{J]~E_ƒCa†@b‹?fCk‘Hl‘Lm‘Qm‘So•Ll’IiŽHhHhJiŒLhŠMiˆMf…LdƒJdGe‚Hf„Hh„If‚EeDf‹FiŽIl‘L-3'17-7:3<;6B=9G?UOCZUQa_dhgukkƒllˆjg’baXV‡PP†QQXYš`cªfj´orÁuxÉ|Ѓ„Ö†‡×‰ˆØŠ‰×Œ‰ØŒŒÌ‹‹ËŠ‰Í‰‡Ð‰…ш„ÑŠƒÓ‰‚ÐŒ„Ï‹„ȍ…Á†º†²‡¥}x–vpŠ“ScƒQ\qUT`^RVcOTbH_]DvUB’LB¼RRÖPWàPYé\dèejâljâwqâvláphõ~vÿ‚{ÿ‡~ôkaÉ?2À8(À;(¿='¾='¿='Â;'Å:'Ç8(Ê8)Ü8/Ú7.Ô8,Ï9+Ê;+È;*Ç:)É7(Ï9+Ñ7+Ô8,Ó7+Ï7*Ì8*Ë<,Ë>-É=0Ê<0Ê<0É;/È:.Æ8,Å7+Å5*Ð@5Ð@5Í=2Ë8.Ë8.Î;1Í:0É6,Ò.$Ù0)ä2.î23ô/8ù-9û+;ü+>ü-?û.?ú0@ü/@þ/Aÿ.?ÿ-?ÿ->ÿ)9ý)8ø*7õ0:ó6=ì9=ã77Ú53Ü86Ü:5Þ;6â:7å95ç85ê65ë54ò38ñ48ï56í76æ74á6/Ú6,×5*Ö9*Ö9*Ö9(Ø9&Ø9&Ù8&Ú7$Ú7$Ô9%Õ:&Ô<'Õ=(Ô=(Ô=(Ó>*Ó=.Ð8-Ù;8ÿ^eÿaqÿPi÷;\ÿAiû6aÿ/]ÿ.WøIjÛYq•>NX'-?+,730*1)-9-5@/:B+<<"B;VG(iV6v‡P£lª¾‹¨¾Ž¥wo‹[aK^F`…BcˆBeŽBj“Go•Lp•Po“So“Uo•Ll‘KiŽHgŒGiŒJiŒLi‹NhŠNf…Je„IdƒHfƒIg…Ih†Hg…Gf„FgIi‘Kl”N*2%.4*470894<;7B=:HA;KD(À>(Á=(Ä;(È;)Ì9)Î8*Ú3+Ù6-Ö:.Î:,Ç:)Â9'Ä;)É=,Í>.Ö@2ÙA4×=1Ï7*Ê4&Ê8)Ë<,È:,È:,É;-Ê;-Ê;-È9+È6)Ç5(Ê6*Ï;/Ò>2Õ>3Ö?4Õ>3Î7,Å.#Õ)%Ü-*ç02ñ29ø0;ü/>þ/?ý0Aú0@÷1@ö2@ö0=÷/:ù-9ú,8ü*7ý/<ù/;õ0:ñ2:í6;æ68ß55Ù42Ü86Ý:5ß:6â:7æ87é77ê67ë54õ49ó49ð69í76æ74ß6/Ú6-Ö6*Õ7+Ô8)Ô8)Ô9'Õ8'Õ8%×8%×8%Ï:$Î<%Î>&Í?'ÍA(ÍA*Î@,Ï=.Ð71éIKÿgrÿOdÿHfû7]ÿAmý/_ÿ1^ø1XåOj¹Wfh39@*,?994443524925>-2<#29ECl`8Ž}R™±u©Á‡µÎ—­È•’®}v”be†Q_ƒF`…Bc‰@gDo•Jr˜Or—Rq•Up”Vo•Ll‘KhGf‹Fh‹IiŒLi‹Ni‹Og†Kf…Je„If…IhˆIjˆJi‡Gg…EhJk“Mn–P(0#*2'/4-350664<87@<9C>8IEû3>ú0>ú0@ø/?ò.<ï/<í/9í07í.5ï,2ò+2ò)/õ1;õ3<ò5;ì59ç47á55Þ65Û75Ü86Ý97ß:6ã:7æ87é77ê67ë46ö5:ô5:ñ7:î87æ74à72Ù6-Ô6+Ñ8*Ð8*Ð9(Ð9(Ð9(Ñ8&Ñ8&Ó8&È:"Ç;"È>$Ç?%ÇA(Ç@*Ê>-Î;1Õ:6üU\ÿ_oÿGcÿ>bÿ8cÿ6gÿ0cÿ4\òCbÈMa…BIL44:97<<>948>58<7379+3="8DS[,ƒPª£o«Èˆ¯ËŽ¯Ì’¦Ã‘¯}{™ggˆQ^‚E^ƒ@c‰@iDo•Js™Ps˜Sq•Uo“Un“MkJgŒGeŠEgŠHh‹Ki‹Ni‹NfˆLd†Id†Ig‡Hi‰JjŠIi‰FhˆEi“Kl–No™Q&.!(0%-2+130333756:97>;6GD=DD*½<'»8$¾5#ÑB2ãOAäN@ØB4Í7)Ë7)Ð>/Ê;+É:*Ç8(È6'È6'Ê6(Î8*Ð8+Ó;.Õ;/Õ9-Ó5*Õ7,Ü;1Ý<2Ú9/ë7:ñ8=÷:Aü8Bü4A÷.>ò,;ï,:í/;é19è38é58í57ñ48ô36ö45î49ï6;í9<é69â45Ý33Ý86ß;9Ü86Þ97á98å99æ89é69ê67ë46ö5:ô5:ñ7:î79ç85ß82Ø7/Ó7+Ð8+Í9+Í:*Ì;*Í:*Í:*Í:(Ï9(Ä: Â: Ã=$Á?%Â@(Ä@+É=.Í81ßhŽCo•Jr˜Or—Rp”Tn’To“MkIgŠFeˆFf‰Gh‹Ki‹Ni‹NfˆKe‡Jd‡GeˆHgŠHh‹Gh‹GfŠDj”Lm—OpšR(0!'/"(-&+-*.0/333775:94==5?@8DE?JLKQQYVWiZ\s]^|YW†[Y‹^]–ee¥nn¸wxÊ€Ú„„䊌ðŠŒðŠŠì†‡ä‚‚Ü€Ô‚€Óƒ‚Ò€„ā„ǃƒÉ„„ΆƒÒˆƒÕ‹ƒÖŒƒÒŠ€ÇŠ€½‰±…~ €xwpxkeec^XpZMm[Mi\Kf^Kd_IcaHfbGl`FlR;„UA£^O¿aYÑYXßPTñQ[ÿXbôkcæYRÔD<Î70Ñ7/×;/Ø/Å@/Á@-¾=*¼9'Â9)¾0"êVJáJ?Å.#Ñ=1Î2Ü<0Ù7,Û7-â>4éE;øAFó8?ð3:ö4?ö2>ñ-;ï,:í2=ì7@æ5;ã68å78é99ð:9ñ86ò65ï==î<<ê:<æ89á77ß76Ü75Ü75Þ97á98ã99æ::é9;ì9<í9<ï8<÷6;ô5:ñ7:í9:è:9à;5×90Ï7,Ë7+È9)Ç:)Ç:)Ç:)Ç:)È;*È;)Á9!Ä>%½;#µ5»:$ÈE3Í@6Ê0.ÿ^eÿVgÿHcÿ;\ú0Xø/[ý5cÿc‡?iDn”Im•Ll”Nk’Qj‘RjŽHfŠDc†Bc†Df‰Gh‹Kg‰LdˆJg‹MhŒNg‹Kf‹HeŠEf‹EjIm“Jp›SrUtŸW*0")/#).'+-(-/.222553782;<4>@5BC;HJGOPTSUaXYm[[s\Z‚^]‰da–kj¦us¼}Ї‡á‹‹íŒòŒ‹ñ‰‰í…„ ڀ~Ҁσ€Ï…†Æ†‡È‡ˆË‰ˆÎ‹‡ÑŒ†Ð…ÎŽ„ÉŠ€½‰³†{£‚x‘{s€tknkd^e\SbaLb`Ke^Kh]Ii\Ij^Hk_Gm_EraG{]CŽ[Fª[LÆWPàQS÷PXÿS`ìWQãKFÛ>9×50Ú5/Ý90Ü8,Ø8*Ó8&Ñ8&Ñ8&Ô8)×7)Ü5,à3,ã2,Ë1'Ë4)È9+Æ=-ÄA/Á@-¾=*¾9(Â9)Ë<.åQEÜH<È4(Ì:-È:,Á5&Ê=+Ê=+Ê;*Ì;*Ë:)Î8)Ï7)Ï6(Ó7*Ö8,Ù7,×3)Õ1'Ø1(ß7.å=4ûBHò7>í07ï/:ò0;î.;ì1<ê6?ã6<Ü36×32ß:8îEB÷JFøEAõ?<è:9æ:8å97â96á85à85á98á98à87â88å99ç9:é9;ì9<í8=ì7<ô5:ò59î68ê88æ:8Ý:5Ó91Ë7-Æ8*Ã:*Â:*À;*À;*Á<+Á<+Á<+½9"Á?)¹;$²5¸;'À>];2@>/3A05?4E=:X;?T-0X51ZI7bjEu[Š±pšÄ|žÈ|š¹}š¹€™·ƒ©yr`YuESq?\{B_>b†>iCm“Fl”Kk“Mh‘MhQhŒFeˆDc†Bc†DgŠHiŒLhŒNg‹MiOiMiŽKgŒGgŒGfŽGj’Im•LnœQoRr U-1"-1#,/&,.).0-11/34/45-9;0<>1@B5EH?KMLQRWUTbXWi\Yx^]fcŽpm¢zx¹…‚ύŠáíŽñŽŒïŠˆé‡ƒá~Õ|Í}ȁ}Dž‡ÄˆˆÆŠŠÊŒŠËŒŠËŒ‡ÇŒ„À‹‚¹‰€¯†|¡€v‘{p€ujpod`i_Ue\MXeK]bKa_Jh[HmZIp[Hq\Go]EtcItZ?‚V= WDÅYMäTSûNTÿIUß@<Þ<9Ý84ß61á6/á6.Þ6+Ú7(Ö6&Ó8&Ó8&Õ8'Ø6)Ý5,á3,ä1,Ç5(Å6(Â9)Á<+Á@-Á@-À=+À8(Ã5'ÜJ=ÜE:ÕA5Îë7@ê=CÜ7;áAAìNK÷ZUüZUùRLïB>è62à72à74à74ß74à85á96ã;8ä::á77ä88æ89è8;é9<ë8<ì7<ì7<ò38î47ì57ç77â:7Ù:4Ï8/Ç7,Â8+¿:+½;+»<+»<+»<+»<+»<+º9$¾@*³9$°7$¶;+´2%Ã40îOTÿZiÿH`ù8Uó6Vó>]ñFfçHfÞEat?9e?6QA2@C04?.29)>5,O61K*#W:,j\Bˆ_«t”½{“ÃyÃv•²|œ¸…™µ…€šm\uKHa7Nh9[xB_}?c„?hŒBl’Ej“Gh’JgLeMe‰Cd‡Cc†BeˆFh‹IjŽNkOjŽNkOkOiMhJgHi‘Hl•Ip™Ms¡Vt¢Wv¤Y25$13&02'01+12-23.34.46+9;-;>-?B1DF9IJBNNNRQWTR]XVd\Zoda~nl”zw®„ÄŒ‰Ø‘Žå”‘쓏펋扅ڂÎ{Å|¿‚}¿ƒƒ¿……Á‰ˆÂŠÃ‹ˆ¿‹„¸‡®…}¦…{€vŽzm~sfmoa`k^Vi[NgZJVdJZbJa_JjZJpYIsYJtZIs]FqY?tU9†T;§ZFÌ\PæRNóEGù:AØ3/Ü41á51ä50ã5.â4+à6)Û8)Ö7$Ó8$Ñ8&Ô9'Ø6)Ý5*à3,ã2,Â8+¿7)»7(¼:*¿=-Â>/Ã;-Ä8+Æ3)ëTKÔ;3Ì8.ÑA6¾4'À<-½>-Ã7&Ä8'Æ9(Ç:)Ê8)Ë7)Ì6(Í3'Ó5*Ô3)Ö2)Û4,ã:3é>7ì?9ë>8è47ì59ï6;î5;ê2:æ39ä7=á<@óUVûc`ÿnjÿidóVQäA<ß61à3/Þ71Þ71Þ71ß82á85â96å97æ::å78æ89è8;é9<ë8<ë8<ë8<ë8<ñ48î68ê67æ87à;7Ö<4Ì9/Å8.½9,º;,¶;+µ<+´<+´<+³;*³;*³:'·@,­8&¬9'±;-«+"Ã54ÿ_gÿSdýE]ó;Uí1B2SE*okHŠ“f•¬t´t‹¹q‹½t¡¹‰¡¸Š§}l‚\K_:BV1Lc7Yq?_{@dƒ@i‹Ak‘Di’Fg‘IdJbLc†Bc†Bd‡CgŠHjMkOm‘Qn’Rj‘Pj‘Nj’Li‘Jg‘Gi“Gm—KqœMu¥Yv¦Zx¨\78(78*66,56056156167/68+;>-=@+@C.DG4IK=NNFQPNSQTVUSYY[a_lkius›€}´ˆ…ÈŒ‰Ö•’㔐䐍ދ‡Ó„Æ}º|µ€{±~¸‚º‡„»‰…¸Š„²†¨z›€xs‡znzrfjm_\j[Tk[NjZKjYI^bK_aKe^Kk[KpZLtZKw\Kz[G{WAƒS=—U?³XFÍSFÝF?å76ê01Û2-ß3/â5/å4.ã2*à2'ß5(Ü9(Ô7$Ð9$Ï:$Ñ:'Ô8)Ù7*Ý5,à3,½>-¹:)µ6%·8'½;+Â=.Ç;.É6,Ñ80ö\T×=5Ë4+ÏA5¸3$·:(¹@-Â9)Ã:*Æ:+È:,Ê;-Ì:-Ï8-Ñ7-Ñ3*Ò1)Ö1+Þ71ç;7ë>:è;7æ74é77ï;<ðê7=ê7=ð69î79ê7:ä::ß=:Ö=7Ë;2Ã;/¸9*´;*±<*¯<)­=)¬<(¬<(¬<(«:(¬=*¤9'¥:*©9-«0)ËAAÿgr÷L^÷E[ðBYèF[ÛN^ÈT]´VW§SQSU@LN9JG4JE1FD-AA'>C#@G%MU.^g,?=.==1==5=<7;<6;=2;=/?B-@D+CG,GI1KM8NOASPITQLYXDZ[M_^Zgepqo‡{y¡ƒ€·‡…ƏŒÓ‹ÕŠÑŠ…ǃ€¹~z­zw¤{u¡zw°|y°€|®~©‚~£y•|t‰zrvkqrffm`Zl[QlZNl[KmZKmZIg^Mi]Mi]Mj]Mn]Ms^My^M€[I“`OšWG§N@¹I=Æ@5Ð6.Ù0)á0*á51â5/ã4/â4-à2)ß3'Ü6&Ú;(Ð9$Í;$Ì<$Í<'Ñ:)Õ9*Ù7,Ü5,ºA.´;(¯6#°5#¹:)Â=.É;/Í6-Û>7ùZTåHAÐ90Ì@3¸6&«4 ±>)¿7'¿7'À7'Ã7(Å7)É7*Î7,Ð8-Ù<3Û:2Þ93å<7ê>:ê=9ç85ã41è96ë<9ê::è8:ì>@øORÿccÿqpùheàUPÈ=8¿2+È5.Ö;7à<:â:9à<3á:2á:4á83ã73ä65å55æ68é69é69ê7;ë8<ë8>è7=è7=ç6<ð8:ì8;è8:ã;:Ý>:Ó>7É<2À+>467>O#Jh4gTt•\„›c‹™dŽ›f‘¢l•¬t•²x„”pn}\Q`C=J09F,BO3O_;Xi=czDgBkŠDk‘Dh’Fe‘F`G`Gf†Ci‰FjKlMlOkOm‘Ql“Rm”Qm”Qm–Pl–Lk—Jm™JržOu¢Qy¬]y¬]x«\CB0DB3DB6EB9CC;CC;BB8AD3CG0EH-GJ-JM0OO7RQ?TREURI[\:\\@\]Kaa_ihvrq{z¦~µ†‚¿ˆƒÃˆ„Á„¸{­ysŸtp•qmŽol£rn¡tq wršwrtoƒskxrilmb^l_Vj\OlZLn[Lo\Kq\Kq\KrZNq[Nn\Nl_Ol`PqaQy_N†[KŸ_S¦OE°A8½:2È5-Ï1(Ø1(Ý5*â70á6/á4-á3*à4(ß5(Ù6%Ô9#Í;"Ê<$È>$Ê>'Í<'Ò;*Õ9,Ø8,·D/±<(¬5!­4!¸9(Ä<.Ì9/Ï5-Ú83ñNIòSMÙB9ÌB5½@.¥2¬?(À;,Á9+À8*À6)Å7+É9.Ï;1Ô;3áD=ãA<ä?;ç>;é=;é;:è88ç77æ93æ95å84é;:ôJJÿ\[ÿdc÷caË=9¿82»4.Ã81ÓB=ÞE@ß=;Ù42â;3â;3â92ä84å84æ66é77é77ê69ë6;ë6;ë8<ë8>è7=è7=ç6<í68ê69æ89à;9Û>9Ñ>6Æ<1¾<.²8)®;)ª;(¦;'¤;&¡;%¡:' 9&ž?-”7%š=,—:)˜3'ÂQKíkmï\fïN^ìI\àHWÎJU·SS¡]RŒfQ‚jP=Sg{Fh‚Cl‹Ek‘Di“Gc‘Fa‘G^Gi‰FlŒImNn‘OlOjŽNkOk’Qp—Tp™SpšRo›Po›NqNv£Rw¦Uz­^z­^y¬]GD3HE6HF9HE±61Á3/Î5/Ö5+Ù7*Û8)ß6/ß4-à3,à4*â6*Þ7'Ø7%Ï7 Ì<"È>"Æ>$Ç?'Ê>'Ï<*Ó:,Õ9,µE/­='¨3¬3 ·8'Å;.Ì9/Ò5.Ò/*ä?;ûYTàI@ÎD7ÆI7¥5®D,ËF7ÉD5ÉA3É?2Í?3ÒB7ÚF<àG?ßB;à>9à;7à74â64ä65ç77é99é>7ç:4ä73è<:ñIHñMLØ=;¹(%¸-(¼5/Å@9ÌC=ÐA;Ö=8Ý>;ã?>á:2á:2â92ä84æ95è96ë99í9:ë7:ë6;ì7<ë8<ë8>è7=ç6<æ7<ì59è58å78ß:8Ù<7Ï<4Ä<0º:-°8(«:(¨;'¤;&¡:'Ÿ:&Ÿ:&ž9%š?,4"—>,“:*“1&Ì\X÷y|æT_ðTbèI[ØDRÃGO®SPšbS†lS{rSC[C?H3B7%O6"_K0prJ€£iˆÇ€yÃt{¾qu¢]oƒHy}J‡†Xy|O\d5:D)3=$4>&WN?XO@YPAZQB\SD]TE]TEcZKbYJbXNcXRg\Zmacsfmwjs|n{~p}s€s€~p}wjtobli\fcb]a`[a^W_\U_[R^ZOa[ObZMe\Kg\Ji\Ii]Gk\El]Fm]Dm]D_gOkiTqZH{M@•RI©WL®TI³WH¦N:¢G2¢?*ª;(¾:.Ò72à23å,1Þ7.Þ7.Þ7.Ü8.Ü8.Û7-Ø6+Ø6+×7+Õ7+Õ7+Õ7+Ô8+Ô8+Ô8+Ô8+¸=.·=.°8(§2!ª2!´;*½>/Â:,Æ6+Í6-Ô:2ÜB8àI>ÖG9Ç;,¹1!ßOGÙIAÔE=ÓE;ØH?ÜG@àC>á<:ã54ê67ï8:í9:ç77à72Ý:3Ü>5ÎKAÈE;½=0µ7)°5&³8)¹>.ÀA2Á;/Ê<2Õ>5ß=8ç;9î79ò67ô68æ7>æ7>æ7<å8:å99å97ã:5ã:3Þ5.ß6/ã81ä84å97ç98ç9:ç9:ë;>ç9;á99Ü<<ÖA=ÌC;ÀB6´@3¦;+¢=+>,™<*–;(•:'”9&“8%‡F2‡>/†/%”-(ÀIKèkoçlqÊWZ¶OP©TQŸVO˜YP•[P–]R™^Vœ`XMb!:O3JOf x’I˜²h¡½r »t™²pƒ›akN\lEWdHS\GHN@=C9;<,AB4=?2:=2,¯:)½9,Ì70Ø42Þ22Ý6-Þ7.Ü8.Ü8.Û7-Ú8-Ù7,×7+×7+Õ7+Õ7+Ô8+Ô8+Ô8+Ô8+Ò9+¸>/·=.®9(¥2 ¦3 ²:)»=.¿;,Æ:-È4*Ì3+Ó;0ÜE:ßPBÞRCÚQAÝE@Ø@;Ñ<6Ð;5Õ>7Ø=8Û96Ý33é69í68ï79í68é77å97â=9á?:ÆC9¿?2¸:,±6'¯5&²8)¸=-¿@1ÅA4ÍA4×@7ß=8å97ê67ï56ô68ç6<ç6<ç7:æ89æ87å97å95ã:3â92ã:3ã:3ä;6æ:8æ:8å99å99æ9;ä:=à<=Ú?=Ñ@;Å?6¸<2¬;-¥;+ <,œ=+—<)–;(’:&‘8&7%z;)€8)‰5*ž;5ÁQPÚceÔ]a¹MM­NL¤SOYP˜\R—^S—^U˜_V™^VSg*Sg(^r3zO—°l¥¾z™²nˆ¡`j‚Fau@Sf9IY5FP7?H59?358/;<,AB4=?2:=2;A5:C2@M3Rc?]uCgƒHqLp”Jm“Hk“Jk“Lh‘Km‘Tn’To“Sm”Qk“Lj”Hl—Hm˜HpJnžJp Ls£Ou¦Tx©Xx©Xx©Zm–\b‹QY‚H]TE]TE]TE]TE]TE]TE]TE]TE[RC\SD]TE^UF_VG`WHaXIaXIe]He]Jd[Jd[Le[Qf[Uh]Yh\\i]]j^`k_ak__i]]f[YbWU`USYVMWTKTQHRNCQMBSOCWQCXRB^WG^WEaYFc[Fg\Hi^Hk`Jk`J^cOmhUy_PˆXN¤[T³VQ´HE¸E>¹@7¸>3·<-·9*¼8+Ã9.Ê:/Ï;1Û7-Û7-Û7-Ü8.Ú8-Ù7,Ø8,×7+Õ7+Õ7+Õ7+Ô8+Ô8+Ô8+Ò9+Ò9+º@1¶>.®9(£2 ¢3ª:&µ=,»=.Ä?0Å7+Æ2(Ê3(Ð<0ØF9ÛM?ÝQBÜ87Ø43Ô20Ô52Ù:7à>;å=<é;<ï8<ï5:ì27ê24é56å97á<8à=8¹;-·9+±6'®4%­5%°8(µ<+»=.ÈD7ÏC6ÖB8Ü=7â96è64í55ò67ê5:é6:é69ç79ç77æ95å:3å:3ã:3ä;4ã<6ã<6ã;8â:9á99à88Ý9:Þ;<Û@>ÕA=É>7º:1­7+¥7(¡;,œ=+˜=*”<(’;(9&8%Ž7$u8%y6%ˆ9,¢E=ºROÂVT¹OO¬HH¤LHœSL˜ZO—^S–bU—aW˜_V˜]UgxB{ŒU“¦n¥¸€«À‡ž³zz‘YYp:?R$AS)AQ-?L0:C.6<.690581:;+@A3=?29<1;A59B1@M3Qb>_wEi…Js’Nr–Lo•Jm•Lm•Nk”Np”Vq•Uo–Sn–Pl”Kk•Il—HmšIpJpJp Lu¤Sx©Xyª[u¦Wq¡U_ˆNVEOx>aXIaXIaXIaXIaXIaXIaXIaXI_VG`WH`WHaXIbYJcZKd[Ld[Le]Ff^Gf^Ig_Lg^Of\Pf\Rf\Sh]Wh]Wh^Uh^Ug]Se[QdZNdZN]YNZVKVRFRNBPL@PM>RO@UO?WQAYTA[VC^WDaZGd]Jf`JgaKadSleUt]O‹[Q«b\»YXºDD¾9:Æ;8É:6Ç80Â8-½8)¼:*½@.¾C1Ù7*Ù7*Ú8+Ú8+Ú8+Ø8*Ø8*Õ8)Õ8)Õ8)Ô8)Ô8)Ô8)Ò9)Ò9)Ò9)»A2¶>.¬9'¡4 2¢8"¬=)µ@.¼>/Á9+Ä6*Ç4*Ë7+Í;.Î0å26á14Ý02Ý34à88å;<ë=?î;?ï6<í38ì/5é05ç47ã77Û64Õ30±7(°6'®6&¬7&¬7&®9'²:)µ:*ÃA3ËA4ÔA7Ü?8â:7ç85í76ð67í6:í6:í68ë76ê86è94ç:4æ;4â92á:2ß:4à;7Þ:8Ý98Û97Û89Ö<:Õ@<ÓB?ÊA;»;2¯6+¥5'ž7(œ;*—<)“<)‘<(:&8$Œ7#Œ6%z@,v5#6'™E;¬OH¬MI©LG¨PLPH–VL“ZO“_R“bT•aV—aW™`W~‹]™©z­½Ž¦·Š¡ts†YN`8/A->3B%:F.=F3;A3:=2;<4<=79:*?@2<>19<1:@49B1?L2Pa=`xFj†Kt“Os—Mq—Lo—No—Pm–Pp—Tq˜Up˜Ro—Pm•Ll–Jn™JoœKqžMrŸNt£Sy¨X|«]w§[mSd”J[„LS|DNw?cZKcZKcZKcZKcZKcZKcZKcZKcZKcZKd[Ld[Le\Mf]Nf]Nf]Nf_Eg`Fh`IiaLiaNi`Oh_Ng^OjaRi`Qi`Qh_Nh`Mh`Mh`KiaLb_P^[LYVGTQBPM>NKTQ>VS@YVC\YF^[H^]I`aSf^QmWJ†[R­hcÁb`ÄLMÌ@CÔ:<×79Ö74Î70Á9+·>)²D+°H-×7)×7)Ø8*Ù9+Ù9+Ö9*Ö9*Õ8)Ô8)Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Ò9)¼A2¶>.«:( 7"™5š7 ¢>&¯B-±<*º;*Â:,È8-Ë8.Î:.Ð<0Ò>2ò5<î3:é27ã36â46â46â46ä15ì5:ì39ê38ê5:æ8:Ü66Ñ2/Ç,(®9(­:(­:(«:(«:(«:(¬9&¯7&¸:+Á<-Í?3Ø?7à=8æ:6ê86ì87ï56î66î66í74ë84ê93ç:3æ;3á:2ß;2Þ=5Ü=9Û=:Ù><Ø=;×==ÌA<ËB<ÆA:»<3­7-£5(ž7(š;)–;)“<)=(Œ;(Š9&‰8%ˆ7$‡6#}C/s4"y4$“G:¤RG¡NFžNE¡WN˜UL’XL[NŒ\NŽ^R”`U—aW›bYƒŽd˜¤|©ƒ€Žj]kJDS42@&$2-:&0;*5=.9?36:;3::29:*>?1;=08;09?38A0>K1Pa=ayGk‡Lu”Pt˜Nr˜Mq™Pq™Ro˜RršSršSršQp˜Om—Km˜Ip›LržOt Qv¢Sx§Y{©^z¨_qŸVd’JY‡?]†NVGQzBe\Me\Me\Me\Me\Me\Me\Me\Me\Mf]Nf]Nf]Ng^Og^Oh_Ph_Pg`Fh`IiaJjbMjbMjbOjbOjbOjbOiaNh`Kh`Ih`IhaGibHjcGe`Mb]J^XHXRBSM=MJ9KH7IH6KJ8LK9LM;NO=PQ?QTASVESVEYYM]WKcQEzXN¡ha¸eaÇUUÛORÞ=Cã8>à67Õ62È:.¹@+­E*¦I*Ô7(Ô7(Õ8)Ö9*Ö9*Õ9*Õ9*Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Ò9)Ò9)Ñ:)¼@4µ=/«<+ :$—7’6š<#¦B*°C.¹@/¿;,Ã7*Å2(Ë4+Ó:2Ù@8ó1<ð2<î5=ë8>ç:>å;>ä:=ã9<á48ä5:å8<ä;>Þ;<Ò86Å1-¼-'«<+«=,«>*©>*¨=)©<(©:'«8%¯6%¹7)Å;.Ñ=3Ù<5à;7ä;8è;7ð75ï75ï75î84ì94é;4è;4å=4â>5à?7ÞA:ÚA;ÙA>ÕA?Ñ??Ñ??¾B:»@8µ<3ª8-¡5(›5'˜8(•<*‘;*<)Š<(‡:&†9'„7%ƒ6$‚5#y<)r3!}:*—OA£YLœRG•OE–VJ”ZN[MŒ[M‹[OŽ\Q”^T™`Yœa[s}Xyƒ`r|ZU`B9F,/;'0;+1;03=44;35<4:?8?B9?A6<<277+89)>?1:27@/=J0O`HO?HO?PPDVRGYOChREYM˜UL³RLØXWàGJçï:Aì?CæBCáACÞ@AÚ>?Ï12Ñ56Ô::Ò<;Ê;7¾73µ4.¯3+¥>+¥>+¥>+¦?,¥>+¤>(¥<'¨;'ª7$²7'¼8+Å8.Ì8.Ö92Þ<7ä?;î85î85î84ì94ë:4è;4å=4â>4âA7ÝC9ÚC<ÕB;ÐA=Ê?<Ç=;Ã<9®>3©:/¢8+œ6(˜7'”8)‘:)Œ;(‹=)ˆ=*…<)ƒ:'‚9&€7&6%~5$v4$x5%…B2˜UEœXK“QCPD•ZL’ZM[NŽ]OŽ\Q’\R•\U˜[V™\W`hCX_=JS4>G,6?*2=-4>35?74=88>:=B/;9*78(=>0:26?.=J0N_;`xFk‡Lu”Pu™Os™NršQršSp™SqœMrNqœMp›LošKrNu¡Ry¥X«`~©az¥]qœUf‘L_‰G[ˆE\‰Hb‰RY€ISzCh_Ph_Ph_Ph_Ph_Ph_Ph_Ph_Pg^Oh_Ph_Ph_Ph_Ph_Pi`Qi`QmcWlbVjaRi`Qh_Pg^Og^Mh_NiaNiaLiaLiaJh`IhaGhaGhaGh`Kg_Je_Ib[H\WCUR?PM:ML:EF4DG6DH7BI9BI9BJ;BJ;BJ;JJ@QQERPAUNÄYSÛQOãCEå8:ß55×:3Ê>/¸>)¬<$Ï8'Ï8'Ð9(Ò;*Ò;*Ò;*Ò;*Ò;*Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)½=2¶:.­<,¥>+˜9#Œ59ž@' :$¯<)¾?0È;1Ì8.Ñ7/Ù<5àA;ð;Bï>FëBGãCEÖ@?Ê;7À50»1.·0,¼51¾:5»<6³:2©9.£9,¡9,Ÿ>+Ÿ>+ ?,¡@-¡@-¡A+£>*¤=*©<(­:(²7(¹5)Á4*Ë80Ö?8ÝD>é:5é:5è;4è;4ç<4ä=4á?4Þ@5ÝC9ØD:ÒC;ÊA9Ä?:¼;6¸85´73ž9-™7*•5'’6'‘:)<*‰:)„9&†=*„=+=*€<)~:'|7'{6&{6&y1#€8*ŒG8–RE’PB‹K?ŽSE™_SXKZN’\R–]T—\V˜[V˜YT—XSV^7EM(6@8A&>G27@E>GJ?GI;BC1?>);;#78(=>09;.69.8>26?.E5>F7?G8=H8AE4HK6YS;_F0€K9Àj]Ýf`åSSçDEè@@ã?=Ö=5É=0Â>/É3$Ë5&Ì6'Í7(Í7(Î8)Ñ;,Ó=.Ò<-Ò<-Ò<-Ò<-Ñ;,Ñ;,Ñ;,Ñ;,¸3,·7.±;-¦;)˜8"‘7’8š:"«B-±<+¹7)Á4*Í6/×<7âC?êHCëBGéDHÝCCÉ:6»61´80®8.§5+ª:/¨9.¤8. 8-›9,–:+’<+>-˜=*˜=*™>+š?,›@-œA.žB-¡@-¡<*¥:(«7(°6)¶6+¾8-Å;1Ê=4ß:4á<6â?6ã@7âA7ßA6Ú@4×@5ÚG=ÒE;ÇA6»;2±6.ª3-¤1,¢1+”;-’:,:+:*‰:)ˆ;)…<+„=+~:'|9(|9({:({:(z9'x6&w4$z, A4˜NC“MAŽL>RE‘VHŽRG˜\R˜\R‘UMTL™ZU—XS–WR `^R[0IQ(AK&BK,>H/7@-2=-4>34;3HPEX^RW[LLO?1;=0:=29?34=,;H.Pa=bzHlˆMu”Ps—Mq—Lp˜OršSqšTpJqžKrŸLrŸNsŸPv¢U{§\ªb‚­fx£^i”O_‰G]‡G`ŠJfŽOhRd‰U[€LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qj^^j_]j_]j_[j_Yj`Wj`Vj`Vj`TjaRjaRjaRjaRjaRjaRjaRj_Kh`Kg_Jg_Jd]J^YEUR?ONE5?E7>F7>F7=E6BF8>E5=F1DN5HK0PB'yS<¹ubÉdXà_YíUTêFGä>>â@=Û>9Ñ82Ì:+Î<-Ï=.Ð<.Ï;-Î:,Í9+Í9+Î:,Î:,Î:,Ð:,Ð:,Ð:,Ð:,Ð:,È?9ÆA:½A7®=/6#•2•2™3¦5#²7(Á;0ÑA8ÞE?æIDéJFìJGÞBCÛEDÎC@¼;5®9/¨>1¢A1œ?.œ@1™@0–>0’?/Œ?-ˆ?.„A.ƒB.‘;*‘;*’<+“=,”?+”?+–?,™>+Ÿ@.¡=-¤:,§9*¬8+±8-¶:0¹:1Ð90Ò;2Õ>5ÕA7×C7ÖD7ÔD9ÑE8ÊB6ÃA4¹=1°:0¨8-¢5.5,œ5.Ž=,Œ=,Š;,ˆ;+†:*„;*<,€=,~;*|;)y:)y:)x9(w8'u6't5&„1)‘C9˜NC‘K?ŒJ>PD’TIRG“SJšWQ˜UO™UR\X”WTŽSO—\XT]0Zc8_j@[eBIT66C)4@*0:-;H.Pa=c{IlˆMu”Pt˜Nq—Lq™PršSqšTq¡Kp LpJqžMt Qx¤W|§_ªc{¦aošUcŒJ]…Fa‰JeNeNc‹Ld‰U[€LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qj^`j^`j^^j_]j_[j_Yj`Wj`Vj`Vj`Tj`Tj`Tj`Tj`Vj`Vj`VlaMk`LiaLiaNf_La\I[VCTQ@ML:HI9DG6AE6AE6?E7>D6=C5=F57@-?H3EM5AA%QA']E³u`³WHÙbZðebîRSéEFìFHèBDÝ79È9+É:,É:,É:,É:,Ê8+È6)È6)Ê8+Ë7+Ë7+Ë7+Ë7+Ì8,Ì8,Î7,Â3/¾5/¸5-¬3( 0"›0Ÿ1 ¥4$»A2ÇC7ÖG?ãKFçLGéJFåFBâC?ÕCCÏDAÁ@:°;1£=/žC1™F4•G3’E3E2ŒC2‰B0ƒB0B/{B.xD.Š8*‹9+‰:)Š;*‹<+<+Ž=,<*–?.–=-›;+9* 8+¥9-©:/«;/¼7.¾90Á;0Ä>3Å?3Æ@4Ä@3ÁA4¸:,²:,ª9+£7+7+™7,–8.–91‰=-ˆ<,…<+„;,‚:+€;+<+<,};+z;*z;,w9*v8)u7(t6's5&Œ91”F<—MBŽJ?ˆH<OD‘SH”QI“NGšSOšSOšVSœ]X“YUZT—f_wƒS~Š\€‹`lxPJX46D#=J.MZ@eqYeoW\fMNWMKB3;I27C-EJ3IG0K<%mN9—dO§`NŸA5ÆSLçc_ð^^îRUíJMêDHç>CÉ;/Ç9-Å7+Å7+Ç9-Ê:/Ë;0Ë;0Ñ>4Ñ>4Ñ>4Ò>4Ó?5Ó?5Ó?5Ó?5Ó?=ÑB>ÍD>ÆF=ÁG<ÂI>ÆN@ÎPDÙSJÞOGäLGäIEåFCâC?àA=ß@<ÔFDÊC?º?7«<1ž>.—D2“H3‘J6‹G4ŠF3‡D3„C1B0zA.wC.uB/†8+…9+…9+†:,†:,‡;-‡;+ˆ;+‰:+‹:)Ž8)8*•9,™<-=/ž>0«9/­8.®9/°:.°:.²:,¯9+®8*¨7)¥7*ž7(›6*•7+’8-9/;0†=.…<-ƒ;,9*:+~9*}:*};-|:,z;,y;,w9,s8*q6(q7)q7)B8”G=‘K?ŠH<‡I<‹OD“UJ—TL—PLSP˜QO–RO—\X_Xh^žzn™k…’fu‚VYh=CR)?O(P`B'=A&;>#78(:;-79,9<1;A57@/MKH/JH1Q?+e>-”ZL¬`S›>6œ4+µ@9ØXUóigödeëRUèINìKQ×J@ÓF<Í@6Ë>4Í@6ÒD:ÕG=×G>ÚJAÚJAÝJBÝJBÞKCßJCàKDàKDëRTéSTãTPÜSMØSLØSLÛTNàUNàLHâHFäEBäB@äB@äB@ãEBãEBØJHËD@¹>7ª>2žA2–C1F3I6‰F3‡D3†C3ƒ@0@1}?0y@/x@1ƒ9.ƒ9.‚:.‚:.ƒ;/ƒ;-ƒ;-ƒ;-9*‚9*…9+‡9,‰:+;-<.=/›;/œ:/ž9- :.¡9,¢8*¢8*¢8*Ÿ8)œ8)˜8(”8)9*Œ:,ˆ:-‡;-ƒ;-‚:,9+~9*}8)}7+|8+{9+z8*y9-x:-t9+q5*o5)q7+r:-G;ŽH<‰I=„I;…K=ŒRF“WMšWO˜QMžTQ™RP•VQ’`YˆbW‚h[ŠwhivKZi>JY.AR&IZ0Wi?dvLj|TXjDL\8?M,:D)C-=@-:=*89):;-68+8;0H-NC-b=-„D:¯VP¶MJ¡++´:9º=;ÑTPòpnýwvñehêY^ò]cáVOÚOHÒG@ÎC<ÑD=ÔG@ÖGAÖGAÙHCÚIDÚIDÝIEÞJFÞJFàKGàKGãGJáGIÝGHÙGG×HD×HDØGDÝEBàBAåABé@CêBBèBBäB@ßA>ÜA=ÚJIÌB@»<6®>3¢@3—A2B0D3‰A2ˆ@2ˆ>1…=1‚<2€<1=1}=1ƒ:3;3;1;1€<1€<1=/=/=/€.™9)•9*“:*Ž;+Š;,‡;+ƒ;,€;+‚:,9+7)~6*{5){5)z6)z6+x6*x8,w9.s7,o5)o5)r:-u=0ŽL>‰K>„J<‚M=…QC‹VH’XM—WN”MIœRQšTR•[We\y_PcXFb]IBP,?M)?O(K\2_qGk~QcyKVk@M_7@R,6E&7D*=F1=D4:=27:19:*:;-68+8;0G*SA+{E9¦NL¸EH»5<¾19Ë@EÄ?@ÊJIÞb`îrpïopçbeáZ^ÛRJÕLDÏD=ÍB;ÏD=ÒE>ÐC<Î?9ÒC=ÓB=ÔC>×C?×C?ØD@ÙEAÚEAà?Dß@DÞDFßFHßIHàJIãIIæFHçACëADîAEîACéAAâ@>Ù>:Ö=8ÛEGË=<»73°;4¦@4˜?1>0ŽA1‰=/Š<0‰;1‰92‡81†93…:4„;4:4:4€<3€<3<3}=3}=3|<0{=0{=0{=.{<-z;,y:+z8*z8*€:0‚:.„:-ˆ:.Œ:.‘;.”<.–=-’9)‘:):*Š;*‡;+ƒ;,<+}<*€8,€8,~6*}5)|4(z4(z4*y5*u3'v6,v8-r6+n4(n5*s:/v@4‹PB†N?N=R@…VF‰XIŽUJ‘RI“NI™RP”SO‘\VŠfZl\LML7BL3@O.KZ9WgC`rJezOdzLVl=G]/AV+7I#0A!5C*=F5QJ:MG7IC3GA13M*>G*[B.PGºVVº7?»'3ÜBNÐ:CÄ9>»;:ÂHGÓ][ßgf×[]ÇILÓJDÏF@ÌC=ÎC>ÒGBÒGBÐB>Ë=9ÒC?ÓB?ÔC@ÕDAØDBÙECÙECÚFDá>Cà?DÞBEßEGáGGàFFàBCâ=AëADí>Cì;Aê<>æ>>ãA?ßD@ßFAÙ@CÉ78¹30±:4§?4š>1=/Ž?2Š;.‹9.‹80‹61Š71Š73‰84‰:5:3:3:3~;3|<3|<2{=2{=2u9.v;-w<.w<.x=-x=-y;,y;,{;1};/~8,7*„6)‡5'‰6(‹5&7(‹8(‹:)ˆ;)…<+<,~=+{<*€8,7+~6*|4(|4({2)y3)y5*t1(u5+v8-r6+n4)n5*t;0xB6ŒTE„Q@P>‚UB„YHˆYI‰SGNG˜SN˜RPPKˆVO‚bUeZHFK4;K0IX;[jKgxVewQYnCSi;Me5I`28M"-B*;2@):E7;B;8<;7;<<=-<=/79,9<1=C77@/6C)DU1Rj8_{@mŒHp”Jq—LršQtœUr›Uq¢Qt¥Vu¥Ys£Ym›Sd‘N\‰HZ„DdŒNa‰J`‡HcŠIfJiŽIeŠDa‡>`‚PWyGPr@i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTo\Nq_QtdUrdWnbTj`Th`ShbTgaSebQa^K[VBVQ;TN6NH.GA'RD)N=#cI2iV²zm·ng³[W¸PQ¶BEÁ@EÉ@GÑBFÖDGÚEIÜGIÝGIÔBEÔBE×BDÙEEØDBÒC;ÎD:ÌH;ÄF7ÃH9ÆH:ÊG?ÐEB×BDÜ?FÞ=EâBDâBDâBDâDEâDEãEDãEDãEDâDAâC@áB?â@>ã?=ã?=ã?=å@>ÎE?Ä?8¶:2©80Ÿ:0•>4Œ@3ƒ?2A4|@5}?4<3ƒ:3‡83Š73Œ72…<-…<-…<-„;,ƒ;-‚:,‚:,‚:,9-9-9-~:/~:/~:/~:/~:/~80~80}90}90}90}90|90|90|90|90z:0y9/y9/x8.w9.w9.w8/w8/v7.t8.s7-r6,q5+p6+l2'q7,m4)l3(o6+m4)q8-H=ULƒTL†QK‹PJNJ•NL˜NM—PL”SM‹UK†\NdOkaFTW8JX5N_;gT`zMWpFTkARg@O`0CA4B@4@<12:/2:/4:.5;-9=.A,>D*T^4ÉE9ÈF9ÊG=ÍG>ÒGDØCEÜAEß?GáCDáCDáCDâDEâDEáFDáFDáFDàEAáC@àB?ßA>àA=àA=â@=ãA>ÑFAÉB<¼=6¬:0 90“;/‰=0=0A4|@5}?4<3ƒ:3†91Š71Œ72…<-…<-„;,„;,ƒ;-‚:,‚:,‚:,9-9-9-~:/~:/~:/~:/~:/}90}90}90}90}90}90|90|90|90z:0z:0y9/y9/x:/w9.w9.w8/w8/t8.s7-r6,r6,p6+p6+k1&q7,m4)l3(o6+l3(p7,~H<‚SK„TJˆQJ‹PJ‘PL•OM–PN–RO‹OG…SH€[K{ePsiPhkLdrOgxT\uKXoEPf?Ka:K_:K\:GV7CP42><03;03;05;/6<09=/A,>D*Q[9^mDmPpŒRr’Sq™RsSsŸRxža|¢exžak‘T`†I]ƒF]ƒF\‚E`†Ia‡Jc‰Le‹NdŠMbˆK`†I^„G]MRtBIk9i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTtbTo_Pm]Pm_ToeYog\keYhbVfbVpl`{xi~{jzgzuapiVf`JPVÔG@ÖGCÚFFÛEFÝDGáCDßCDßCDßCDàDEßECßECßECÞDBÞE@ÝD?ÜC>ÜC=ÜC=ÝB=ÝB=ÕF@ÎE=ÃC:³>5¢:/’8-ˆ9,<-€A2~@3}?2=1ƒ:1†91ˆ81‹80…<-„;,„;,„;,‚:,‚:,‚:,€:.9-9-9-~:/~:/~:/~:/~:/}90}90}90}90|90{8/{8/{8/{;1{;1z:0y;0x:/x:/x:/x:/t8.t8.s7-s7-r6,q5+o5*o5*k1&o6+m4)k2'n5*i3'm7+}G;†QI‡PIŠQJŽQL‘RM“RN•TP’UPVO‡[P^OtbNoiQnrWjwYfwWPf@K_:EY6BV3EV6GV7FU8ER8?I1*7;*:<.<>0<=/:;-5<45<46<26<09=/<>0=@-=C)MV7Zi@h|KlˆNpOq™RuŸSt Sz cw`n”Wc‰L\‚E\‚E\‚EZ€C_…Ha‡JbˆKdŠMc‰La‡J_…H]ƒF[}KPr@Gi7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTtdWqaTm_Rk_SkaWlcZle[jf]jf]wuiˆ„y‘•’Œ|‰‚r€ygZfNLV>AI2CF1ED0D?,I=-TD5M:+O8*R6*T7)X8+];/a?3eA5‹KAœSL­UQ¶NK½EDÇABÓCCÛEF×?>Ø@=×B>ØD@ÙEAÚFDÛEDÛEDßCDßCDÞDDÞDDÞDDÝEDÝEBÜGCÛFBÚE?ØE>ØE>×D=×D=ØE=ØE=ÖC<ÔE?ÊE>»@8§;/–8,‹9+…;.‚@2@1~?0=/;/„:/‡9/‰90„;,„;,ƒ;-‚:,‚:,‚:,9+9-9-9-~:/~:/~:/~:/~:/~:/}90|90|90{8/{8/{8/y9/x8.{;1y;0y;0y;0x:/x:/v:/v:/s7-s7-s7-r6,p6+o5*o5*n4)j1&o6+l3(h2&k5)h2&l6*|F:ŠOGŒPHQIRMSN’UPWPŽYQ‰]R…aUy_PiZGd_IciOZgKN]@EU8AQ4=M0G2:A/7>,9=,9=.8<-7;,6=66=66;46<29<1;=/dxGj†LpOs›Tw¡Uw£T{¡dr˜[e‹N\‚EZ€C\‚E\‚EZ€C_…H`†Ia‡JbˆKa‡J`†I^„G]ƒFY{INp>Ef7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTseXugZsg[mcYjaXle]snhzwp~w† –©¥œ«§œª£™£‘œ”‰v~i`hSLSADK9AJ7>G4>G4BI7GNBÛ?@ÛAAÛC@ÚEAÚEAÚEAÚEAÞDFÞDFÞDFÞDDÝEDÝEDÛEDÙEAÚFB×FAÕF>ÔE=ÓF=ÓF=ÓF=ÔG>×@9ÕB;ÏD=ÁB9®>3œ:-‘;.‰=/„?0?/~?0=/<-„:-†:-ˆ:.ƒ;-ƒ;-‚:,‚:,‚:,9+9-9-9-~:/~:/~:/~:/}:1}:1}:1|90|90|90{8/y9/x8.x8.v8-y;0y;0x:/v:/v:/u9.u9.u9.s7/r6.q6.p5-o4,n3+m4+m4+j1(o6-j4*h2(j4*g1'k5+zF;MGNH‘PJ’SLUOŽWPŠZP…ZQ{YMv\OkZJ]UBYXDY^HOYA>L3;G18D.5A+5A+8D.=I3AM7EN;BK8?H5.5<,4;+5;75<56;56;48;2:-;@)GP1Ra:buGi…Kq‘PuVy£Wx¤Uzcn‘W`ƒIZ}C[~D^G^G]€F`ƒIa„Jb…Kb…Ka„J`ƒI_‚H^GW{KLp@Bf6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTmaUndXpf\lcZkd\rmg„|‘‹¥¤ ³²®ÄÁ¼ÉÆÁÉľÅÀºÀ¹±¹²ª¤œˆ‚tfcTPQAEI8=F38E18G45F35F44E36D58D6;E:?G<@H=<6(L0–=/Œ=.†>/‚?/€>.=-<-ƒ;,„;,‡;-‚:,‚:,‚:,‚:,9+9-9-~8,~:/~:/~:/~:/}:1}:1}:1}:1z:1z:1y90y90x8/v7.v7.v7.u9/u9/u9/s9.s9.s9.r8-r8-q6.q6.p5-o4,n3+m4+l3*l3*h2(l6,i3)f2'h4)e1&i5*xD9’KE’MF“PJTLVO‡XNYO|\Os\Nk[L_XFUTBPS@JQ?@I64@,3<+2;*09(09(2;*5>-9B1-;@*CL/O^7_rDi„Mr’SwŸXy£Wv¢Us–\f‰OZ}CX{A\E]€F]€F^G`ƒI`ƒI`ƒI`ƒI`ƒI_‚H^G]€FVzLJn@Ae7haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTiaVjbWkdZmf^upjˆ…€Ÿžš°°®ÂÂÀÓÒÐâáßéåäçãàãÞÚÞÖÓ×ÏÌÒº°º¤™˜†zym__YIKL:>F19E1>2J91`94ˆHH²\_È_dÍVZÐOSÕMOÚLKÜJJàHEáFBãDAåA?ÞDFÞDFÞDFÝCEÝCEÜBBÛCBÛCBÚDCØD@ÔE?ÓF?ÐF<ÏF<ÐG=ÎH=Ý>8Ú?:ÒB9ÉC:¼C8«A4™<-Œ9)‡>-ƒ>.>-€=,€=,<,ƒ;,…<-‚:,‚:,‚:,9+9-9-~8,}9.~:/~:/~:/}:1}:1}:1}:1}:1y:1y:1x90x90w8/t8.s7-s7-s9.s9.r8-r8-q8-p7,p7,p7,p5-o6-n5,n5,m4+l3*i3)i3)g1'k7,h4)e1&h4)d0%f4)uC8•JE“LH“PJTL‰WNYOx[Mp]Nj^N]WGPQAKN=CJ:9B12:+08)36-17-06,/5+/5)17+2:-4<-9D4;F6=H7*0640641622716929;0:<.:?)?H+KY5]pChƒLs“TwŸYw¡WržQiŒT^IUx@WzB[~F[~F[~F]€H_‚J_‚J_‚J_‚J^I^I]€H]€HUvKJk@@a6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcToh^ng_lh_tqj…„¡ ž¼¼ºÏÏÏÎÏÑààâòòòúøùû÷öøòòñìéêåâïÍÃàÀµÅ©¥€sbaZGML7CH2AI4AH6BF7BD7C@9D<9C98C772?5;@9@93H/+c76QR³giÇmmÂ[\ÉYWÑUS×QNÝKKåGFèBBê@AÞCGÞDFÞDFÞBEÞBEÝADÜBBÜBBÜDCÙCB×C?ÔC>ÒE>ÐE>ÏF<ÐG=â@;Ý@9Õ@9ÌC9ÀD:°B5›;-‹5&Š=-…=.>-€=,€=,<,ƒ<*„=+‚:,‚:,€:.9-9-~8,}9.}9.~:/~:/}:1}:1}:1}:1}:1{;2w;1w;1v:0u9/t8.s9.r8-q7,r8-q8-p7,p7,n8,m7+m7+m7+o6-o6-n5,m4+j4*j4*i3)h4)f2'k7,h4)c1&e3(b0%e3(uC8”JG“NIQJ‹TM„XOzZMq[Mh\LXUDHK:=D4=E69A208+/7*5=056157257247005.06,08-19,6A3:E5=J9>K9;J77F12A,0?*.42.420511605818:/:<.:?+WzB[~FY|DY|D\G_‚J_‚J^I^I^I]€H]€H]€HSsJHh?>^5icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUfc\gd]vsn“’Ž¯¯­ÄÆÅÚÛÝìíïóôöö÷ùüüþÿÿÿÿþÿÿûúüööùôñÿÞÏöÖÇãÈ·É´Ÿ­ž‡ŠƒicbFGG-EG/DF0GD3IC5H;3F42G34M797@;;@:@;8G85cGF‘kjŔè­©Ò‹‡ÇtnÀ]XÆSNÖNNâIKëEIðCGÜFHáHKÜCFÕ:>Ø>@âFIàDGÖ:;Ú@@Ú@@ÙA@ÖB>ÔC>ÑB<ÏB;ÏB;ãA<Ý@9Ô?8ËA7¾B8°@4;.8*‹>.†>/‚?.>-€=,<+=*=*9-9-9-~8,~8,|8-|8-|8-}9.|90|90|90z:1z:1z:1z:1x=5w<4v;3u:2t91r7/p7.p7.o6-m7-m7-m7-m7-l8-l8-l8-i2+m6/p92o81k4-g2*g2*h3+e0(i7.d2)^,#`0&_/%b2(p@6’LJOKŠQJ‚QJ}YMv_QfYIRO>CF5=F58C35@02=/3;04:04:077577566446135016/05..6+.9+2=/6C29H5:I68G42D./A+,20,2.-2..3-36/780:&DR1YkCh‚Ru”[wž_r›Wj•N\}HXyDTu@Tu@WxCZ{F[|GZ{F^JbƒNbƒN^J\}H_€K`L^JTrNFd@:X4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUed_onj…†¤¤¢ÁÃÂÖÚÛêîï÷ûþ÷ûþøüÿüýÿþþþÿþÿÿýüÿüùÿûøÿïÚüêÒîÞÅØͱÀ»¤£„‚ƒcgkJMP1II/EC,HA/J>2L93M85Q99;;9BA?MHE\RQyjg¢‹Ì³®åÇ¿ÿÙÏ괪̃|Àc\ÌVTÛPSãFMâ=DÕEEÕEEÙGHÞIKÛEGÖ<>Ö<>Ü@CÚ>?Ù??Ú@@ÙA@ÖB>ÓB=ÒA<ÐA;ß@:Û@;Ô?8ÌA:¿C9±A6 ;/‘9+Œ=.‡>/ƒ>.>-€=,<+€=,<,9-9-9-~8,}9.|8-|8-|8-|90|90|90z:1z:1{;2{;2{;2v=4u<3t;2s:1r90p7.m7-m7-m7-l8-l8-l8-l8-j8-j8-j8-l5.n70n91n91l7/i4,g2*e3*c1(e3*_/%^.$b2(^.$`0&n?5„IEˆQLˆWRWOrVKdRDQJ:>?/:A16A14A02>02<14<15;17:388677577557446116005./7,.8-1<.4A07E49H58G44E22D.062.40.3--2,14-45-8:-9=,7?'DQ3YkEh‚Sv”`wbp˜YfNZzHWwETtBTtBVvDYyGYyGYyG[{I_M_M\|J[{I^~L^~L\|JTmOF_A9R4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUneVneVneVddby{x—™˜²¶µÍÑÒäéìôùüúÿÿûÿÿûÿÿûÿÿýÿþþþüÿÿûÿÿúÿÿúÿüßúùÛïðÐáåÄÒØ´¼Äž©‡’j`hCRW7DG,EC.KD4MC9N?8L=8C:;SJKi`a€xv›“¼µ¯×ÐÈçÝÓúêÝÿôéÿåÛ画Äec¸ACËBIáNVÚVRÒLIËDAÎBAÔFE×EFÙCDÛBD×=?Ø>>Ù??Ø@?×A@ÕA=ÓB=ÒA<Ü?:Ù@:ÔA:ÍD<ÀD<²B7¡<2“9.Œ=0‡=0ƒ>/>.€=-<+€=,€=,9-9-9-}9.}9.|8-|8-{8/}:1}:1{;2{;2{;2{;2{;2{;2t;2s:1p:0o9/n8.m7-k7,k7,l8-l8-j8-j8-j8-j8-i9-i9-n91m80m80m80m80i7.f4+c1(c3)a1']-#_0&c4*\-#_0&sD:OK‚UPXQqSK^J?OC7?<-37(2:+/<+0<.2=/4<15;17:37:388688668557257227016/08-.8-0;-2?.6C27E48G48G48G46=53:2/4-,1*.1(13(57*6:)6>'DQ5[lHk„Zy–fwœfl”X^‡KWwEUuCRr@Rr@TtBVvDWwEWwEXxF[{I]}K[{I[{I]}K\|JXxFPfOAW@3I2icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUneVneVneVneVofWgklƒ‡ˆ£§¨¹¾ÁÐÕØåíðóûþõýÿùÿÿûÿÿüÿÿüþûýþùþýøÿþ÷ÿÿöóÿâñÿÞëùÖäòÎÛêÃÌÛ²³Â™ ¬„}‰cdnKLS4EI0HJ5KI:GE9D@7QEEk__‹€¤š™µ°­ÊÇÂÜÜÔççÝ÷óèÿýñÿøíÿÝÕú·±èŽŽÌbd±>CÃPIÉTMÉOJÃF@ÊFBÔMJØJIÑ??Ò>>Ô>?Õ?>Ö@?ÕA?ÓB?ÓB?ÒC?×>8×?:ÒC=ÌE?ÀE>±B9¢=5•;2Œ<1‡=0ƒ=1=0=-~<,€=-€=-~:/~:/~:/}9.}9.|8-{8/{8/~;2|<3|<3{;2{;2z;4z;4z;4p:0o9/o9/m9.l8-k7,j6+h6+i7,i7,h8,h8,h8,h8,h8,h8,o:4j81h6/i70j81j81e4-a0)e4-b1*].&a2*b3+Y*"_3*zNE~]XvWRiNGWC:J<3@:.:;-8<.08)/:,1<.2=/5=25;169078079468368349338138119.19..9+/:,1<.2?.5B18E4:I6;J7;C87?428.-3)-0%/1&24'48)4<'ER8_pPr‹d}šnwœifXT}EUrBTqASp@Sp@TqAUrBVsCVsCWtD[xH]zJ\yI^{K_|L\yIVsCK\JD8f\Z†|z«¡ŸÁ·µËÃÁÕÐÍãâÞîïé÷øðùöíüòèÿóéÿóíÿäß즤´if«K=³QDÁYNÇ[QÆQH¿D=ÂA<ËD@Ë@=Ï?>Ð@?ÑB>ÒC?ÒC?ÑC?ÑC?Ö>9Ô@<ÒD@ÉE@½D<¯@9 >5•<4Œ<3‡=2ƒ=1=0=/~<.=/€Qn>Qn>Qn>Qn>Qn>Sp@Sp@WtD[xH]zJ]zJ_|L_|LZwGQn>ESF6D7(6)gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXpgXpgXinrz‚…“š «´¹ÄÍÒÜåêì÷ùôþÿôþýöÿüúÿúûÿ÷ûþóøúìõöæòóãòþêôýèôüåóøáòöÛëëÏØ×¹ÅÄ¥±°’ŽregOMP;EL:EM>EODGSG~zqŸ›’ƽ¸ÙÎÌáÓÒçÛÛôêéü÷ôðïëûüöÿÿöÿþôÿúñÿôêÿçÞÿÚÒߑ}·fS¢K:²UF½WKµF;·@8ÈKEÇC>ÊC?ÌB?ÎC@ÎC>ÍD>ÍD>ÌC=Ô@<ÒC=ÎE?ÅD?¸A;ª=8ž;5•<4Œ<3‡=4ƒ=3=2=1~<0=1=/~:/~:/~:/}9.|90{8/{8/{8/|<3{;2{;2y:3y:3x92w81w81m80l7/j8/j8/i7.i7.g7-g7-g7-g7-f7-f7-f7-f7-f7-d8-i70h6/g5.f5.g6/h70g6/e6.a2*e6.^2)\0'`4+a5,i=4|PGQJBE>6:6-85,99/8:/47,36+4:.5;/5;/69.69.68-57,46+19,19,19,19,19,19,19,19,08+.9+.9+/:*0;+3>.6A17B2gw]umv‘nf‰_RwKAh;Mj:Nk;Pm=Pm=Nk;Nk;OlVsCZwG]zJ^{K_|L_|LVsCLi9=H@/:2#.&gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXqhYqhYcjpmtz„’£¬±¾ÉÍÓÞâåðòðüüòüûõþùøÿ÷úÿôüÿòúýìøùçöøãööìù÷ëúöêýöæÿôâøëØçØÁÖƯÀ±šŸ“}vn[ZWFOQCQWKYcZbme–˜‹²²¦ÕÎÆêÜÙõããüéëÿñôÿ÷ùÿýýýþùøûôõûñúýòÿÿóÿÿóÿÿñÿãÊ¹q[¨WD¬SCµQB¹MA¿JAÂG@ÆE?ÉE@ÊE@ÊE>ÉD=ÈC<ÈC<ÒC?ÒD@ÌEAÂC=³=9¦;5œ;5•<6Œ<5‡<6ƒ=5=4<3~<0=1€<1~:/~:/~:/}9.|90{8/{8/y90{;2{;2z:1x92w81v70v70u6/k90j8/j8/j8/j8/h8.h8.h8.g7-f7-f7-f7-d8-d8-d8-d8-h6/h70i81i81h70i81j;3l=5g80k<4b6-a5,oC:xLCtI@uJA:=647036/7:18;247.14+25,58-58-57,46+46+46+46+46)/7(08)08)08)08)08)08+08+19,08+08+/7*08+19,3;.4e9Jg9Li;Nk=Nk=Li;Li;Mj
    UrDYvH[xJ]zL^{M\yKQn@Eb47@;+4/!*%gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVofWpgXpgXqhYriZhowmt|‚‹’¥®µÂÍÑÔßãäïñòþþóýüôÿùöÿ÷úÿôüÿñýÿíýÿêýÿêÿöñÿøóÿ÷ïÿ÷íÿöëÿïáöÜÍäʹƯ§”ƒ€sce]P[YM_bYovo|…€¦­¾À³ÚÖÍñãàÿìíÿñôÿñ÷ÿñ÷ÿ÷ûûúøøÿøøÿúôÿõîÿïòÿï÷ÿóÿñÖÿðÖÿÈ°Å}g¢O=®Q@¸RD³C8ÀIAÄH@ÇF@ÇF@ÈE=ÇD<ÆC;ÆC;ÓD@ÐE@ÊE@¾A=±;7£74š93•<6Œ<5‡<6ƒ=5=4<3~;2<3=1~:/~:/~:/}9.|90{8/{8/y90z:1z:1y90w81v70u6/u6/t5.k90k90j8/j8/j8/i9/i9/h8.f7-f7-f7-d8-d8-d8-d8-d8-f5.i81l;4k:3j92j92m>6qB:n?7pD;g;2g;2SJŒaXTKpE<6=52913:27<5492/5+25,9<345-35*24)13(13(35(46)57*,7',7'-8(-8(-8(-8(-8(/7(19*08)08+/7*/7*/7*08+08+7@+9B-=D2=D2=A29;-35'/3$3:*JVBcr[f}a\wVLnICgA=c:He7Kh:Nk=Nk=Kh:Jg9Li;Nk=TqCWtFZwI[xJ]zLZwINk=A^05;9*0.!'%heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVg`MjeOnlWnl]ff^eeeqqy‡‘“–ž¡«³¶ÃÈËÙÝàìíï÷÷÷ûùúþýûÿþúÿÿûýþøûüöùüóúýôùÿõùúõùúôøúïúûëûýèöùÞäçÈÒÖµ¶¼š”›ymvW\fK`lTq~lƒ‘€žŽ··µËËÉââàïïíôôòøøöúúøùù÷þþüþþüþþüþþüþþüþþüþþüþþüæÿÿðÿÿûÿÿýïîЪ§ a\™D=¸MEÄKBÈC:ÊA7ÎD:ÑH>ÏJAÉI>ÆG>ÁJ2¿K4¹L5¯K4 H2”F2ŒE3‡E5‚D5C6€@4‚>3…;2‡9/Š7/6-~:1~:1}90|8/{7.z7.y6-x5,w7-w7-x8.x8.v8-u7,s5*q3(h91h91h91g80h70g6/g6/g6/f5.h6/i70j81i70h6/f4-g2,k1-k4/n70m80k9.j:.i>.iB1dC2gJ8aJ8raOyn\ƒ|j…‚qOL;4:04:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4./4..3-.3-/4./4.05/0;32=55A77C98D86B64@22?.3@.DQ=WeN\jSSaHHV=DR8FT:Ic>Ke@Ke@Ke>JeOjAUpGYtK\vO]wR]wTWpPHaC8Q3).2&+/$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVjcPlgQmkVlj[gg_lll~~†’ž§±³¹ÁÄÏ×Úâçêðô÷ûüþÿÿÿÿþÿþýûÿþúÿÿûþÿùûüôøûòøûò÷ýóøùóøùñøúíøùéùûåòõÚáâÃÌЯ´¸—‘–vkrSYaI_kUtoŒ˜Š›©œÀÀ¾ÓÓÑççåóóñ÷÷õûûùüüúûûùþþüþþüþþüþþüþþüþþüþþüþþüîÿÿôÿÿüÿÿÿüúÿíêñ¿¸Ã}u¢J@³K@»J<ÅK>ÈJ>ÄD9½=2¿?6ÃD;ÂH3ÃJ7½M9³J7¦G5™C4D6‹F7ƒC7C8A7>5‚<4„:1†91‡81}:2}:2|91z:1y90x8/w7.v7.u6-v7.t8.t8.t8.r6,p4*o3)i81i81i81h70h70h70g6/g6/e3,e3,g5.h6/j81j81j81k92k60l71m80l:1k;/l>1j@0iD2hG6kP=gR?ufSvd‹†s†ƒrML:4:039/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4..3-.3-.3-.3-/4.05/-80/:21=34@66B66B66B45B16C1CPAO6BP7FT:Ic@Jd?Ke@Ke>Ic3L/).2',0$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVmhTmhRmkVjk[jkcvxw‘‘™¨ª¶¾ÈÊÓÛÞêòõ÷üÿüÿÿþÿÿÿÿÿÿþÿþýûÿþúÿÿúýþøúûóõøïóöëñ÷ëô÷îöøíöøêö÷åõ÷áîîÔÛÛ¿ÉÊ«°±’“–yuy^kpZt{iˆ§œ¬¶­ÎÎÌÞÞÜïïíøøöûûùþþüþþüýýûþþüþþüþþüþþüþþüþþüþþüþþü÷ÿÿùÿÿþÿÿÿüúÿúôÿöíÿÑÄٞ•L=§Q@¬K;ª>1¸G9ÑXMÐTJ¾?6ÆD6ÇH9ÄJ=¹I=ªB7?5•A7’E=‡A9„A9@:>8~>5<4<4€;4x<2x<2w;1w;1v:0u9/t:/t:/s9.r9.r9.r9.q8-n8,l6*k5)j81j81j81j81i70i70i70h6/g5.g5.g5.g6/h70i81k:3k:3l;4k:3i:0j;1k?2lB4iD2fE2fI7lVAjYEviV†l‘Ž{€mEF439/28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4./4./4..3--2,-2,.3-/4./4.*5-+6.-9//;12>24@46B47D38E3?L:ER>CQ:;I28F->L3ES:H`>Jb@LdBKc?Ia=G`9F_8G`9RkDXpL]uS^vVZqTPgK=T8,C)).2',0%*.heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVjcYkd\kd\md]meZmfVniUljSlkVlm]pqi€‚ž¡¨º¼ÈÃÍÏÜäçóûþûÿÿúþÿüýÿýýýüûùÿþüÿÿûÿþùûüôõöîîñæëîãçíáíñãðôåñôãòôßðòÜêêÐÙؼÈÇ«²±•¡¡‡‘“}‘’€œžª­¢¶»´ÀÅ¿ÜÜÚééçööôûûùýýûÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüþþüüúÿÿþÿÿþÿöòïûôîÿýóÿûíÿõäêı·ƒn”Q>¡P=¸XH¸L?¸D7ÀG<Ç>4ÉD;ÈH?¿F>°?9¢;6š=8–A>?;‡@<@<}@;z?9y@9x?8v?8v=4v=4v=4u<3s=3r<2r<2q;1o;0o;0o;0l:/k9.j8-j8-i7,n72n72m61l71l71k60i70i70l:3j92h70g6/f7/f7/h91h91j?6f>4e=1f>2hC3iE5gF3cG2cJ6hV@k\GskV‡‚nŽzor_9>*28.28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3-.3-.3--2,-2,-2,-2,.3-.3-)4,)4,*6,+7-.:01=14@25A36C2:G5Æ=7ÈA;ÈD?ÀC?´<;©98 9:›==‘==Š>>„@?|A=xA6s>6s>6r=5p>5p>5p>5n>4n>4m=3l<2j;1j;1i:0i:0i:0p62p62p62o51m61m61k60i70l;4k:3h91e90e90e90e:1f;2dB6cA5cC4dD5fG5eH6cH3_I2^L6eV?jbKrmW„ƒn„‡r[`L3;&28.28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3--2,-2,,1+,1+,1+,1+-2,-2,,6.+5-*4,*4++5,.8-0:/2=/2=-5@06A05A-1=)1=)5A+9E/=O5AS9FY=I\@J]?J]=K^>L_?TgG\oQcvZbtZYkSK]G6G4$5"&+.$),"'*heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVjcYkd\lc\md]meZlfVlgSljSlnXorasvm…„Ÿ¤ª¸¿ÉÖßäîöùùÿÿûÿÿùýÿþÿÿÿÿÿþýûÿÿûÿÿúüüôóõêëíâãçÙßãÕÜãÓäéÒçìÕéíÖêìÔëëÓèæÏßÚÄÔθÔͺÍƶËøÐÉÁÙÒÌàÛØëååòîïòòðùù÷ýýûýýûýýûÿÿýþþüüüúþþüþþüþþüþþüþþüþþüþþüþþüÿøüÿöùÿýýþÿý÷ÿýïÿøëÿõòÿøëúçÿÿíÿïÛ̧”£lX£ZG­VCªM;ÁA8ÃB<ÃD>¿D?·?>­;;£99œ:;–<<Ž>?…?=}@=wB7o>7n?7o@8n?7m>6i=4h<3h<3h<3i=4r73q62q62p62o51m61l71j81h70g80e90e:1d<2f>4f@5gA6]C4aG8cL:dM;cM8`K6]K3]M4]Q9`Y?miPss[€„mt|eFO:2>(39/28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0*+0*+0*,1+-2,,6.,6.*4,*4+*4++5*-7,.9+-8*0;+4?/5@/4?.3>-3?+4@,7F/;J3@P6DT:GWºH=ºH>ºG@·F@°C@¦=:97—<;‘=;ˆ>;€A5i=4j>5j>5k?6s63r73q62p62n72l71j81i81d8/d90c;1d>3d@4cA5cA5bB5VG4^OmmSsw^z‚jcmU2>(5C,4:039/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1+,1++0**/)*/)+0*,1+,1++5-+5-*4,*4,+5,+5,,6+-7,,7)/:,2=/6A17B27B25@/4?.2?+5B.:G3>L5AO6ES:JX?M[BTbI]kTcqZ_lXUbPERA2>0#/#(..&,,$**heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjdTjdVjcYkd\lc\md]lfZlfVomXmmUimVgkZembr{xŽ—œ¨±ºÊÓØäëñöþÿ÷üÿøüÿþÿÿÿÿÿúù÷ÿÿúýýõøøîðòåéëÝåéÚåéØåìÚæíÎèïÐéîÐæéÎèæÏèãÏáÚÈÙÏÃÚÍÄßÒÌìÞÛúììÿôöÿõùÿõûÿøþýýûÿÿýÿÿýþþüþþüÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüþþüÿüúÿýúÿûøùýüøÿÿôÿÿðÿÿêþüðÿûùÿûÿÿôÿöæÿôßÿãÍ×­”¢sY°SA®Q?®N>°O?±OB¯J@¥C:š<4—<7‘>8‰?6ƒ@7{B7tD6qE8nG8s>:s>:s>:q>:q>:q>:q>:p?:sB=rA8l=7l=7m>8n?9r73r73q73n72m82j81i81f:1f;2d>3d@4bB5`C5]A3\@2[?1QI4[S>f^Gg_H`Y?ZS9ZS7\W:ZV;WW;knSrx^u}eUaI%37E.4:04:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0**/)*/)+0*+0*,1+)3+)3+*4,+5-+5,,6--7.-7,,6+.8-2=/6A39D69D67B46A1/<*2?-5B09F2:u@:s@9o>9o>9n72n72n93m;4l;4j;3g<3d<2c?3^>1dG9cG9T=-O8(M8'D/TR;PN7KI0MK2]Y>ieJeaDVU7XX<]`CosXz€fcmT=I1,:#1?(5;15;14:04:04:039/39/39/39/39/39/28.17-17-17-06,16016005/05//4./4./4./4.,1+,1+,1+,1+,1+,1++0*+0*.5.-4--4-,3,-4--4-.5-.5-+2*-4,08-5=29A6=E:?G7B25@03>-1<+2>*9E/BN8IU?O[EVbN]hWYdTLWIF5F4‰D4…D2}B0yB.s@-o?+v?:t=8u>9v?:t?9q<6r=7sA:q?8q?8q?8o>7o>7n=6n=6n=6l;4m<5m>6k?6j?6h@6eA5cA5dG9[A2^G7\I8N=+F7$G8%A4!IM4GK2DG,BE*MM1[[?abC`aBYY=dgJsw\sy_X`H8D,/;%6D-7=36<26<26<25;15;15;15;15;15;15;14:04:039/39/39/27127127116016016005/05/.3-.3--2,-2,,1+,1++0*+0**1**1*)0))0))0)*1*+2+,3,.5--4,.5-07/4;39@8?F>BIA:G69F56C13@.2?+5B.;I2?M6KXDR_KXeSVcRKWI8p;5q<6vA;sA:p>7r@9xG@n=6n=6n=6m>6l=5l=5l=5l=5g?5h@6gA6gC7eC7cC6`C5^D5aL;UB1ZI7`S@RG3C;&E=(GA+>G,BH.@F*<@%?B%LO2_`AijKaaEnqTvz_gmSHP84<%4=(=F18>48>48>48>47=37=37=36<28>48>47=37=37=36<26<26<25:449349349338238238227105/05//4..3--2,,1++0*+0*(/((/((/((/((/()0)*1*+2+070.5.+2++2+.5.5<5K:4-9/-3/-3/,2.gdUgdUheVheVheVheVifWifWifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWmlWimThpXht`hthm|wˆ—š¥´»ÀÉÐÔÛáéðööûÿúþÿýþÿÿÿýÿþúþþöýýñúûí÷úéô÷âîóÝçìÕàèÐÜà¿×Ú»ÖÖ¼Ù×ÂÝ×ÉßÖÍåÛÙìàâøìðüïöÿõûÿùþÿúýÿûûÿûûÿýúþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüöÿþ÷ÿþúÿþþþÿÿüÿÿùÿÿøÿÿ÷þÿøÿÿøüÿùùÿýúÿÿøþÿøúÿõöÿóÿþìÿýéÿòßÿñÛÿðÚñÒ½³zyS3i?3i?3i?3f>2f>2f>2f>2aA4`C5`C5_C5^D5[D4ZE4VE3XI6OB/\T?oiSc^HMK4IG0LJ3;E*?H->G*48>47=37=37=39?58>48>48>48>48>48>48>47<67<67<66;56;56;55:45:438238216005//4.-2,,1+,1++0,+0,*/+*/++0,,1--2.-2.051.3/+0,+0,-2.2738=9'4.:0.5..5.-4-gdUgdUgdUheVheVifWifWifWifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWkmWjnUiqYgs_drejyt…”—¡²¹¾ÇÎÓÚâèïõôùýùýÿýþÿÿÿýÿÿúÿÿøÿÿóþÿñûþë÷úåðõÞèîÔàéÎÛܽÕÕ¹ÑÑ·ÔѾÚÔÈáØÓêàßôéíþóùÿöþÿûÿÿýÿÿþÿÿþúÿþúþÿùþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüøÿÿøÿÿûÿÿþþþÿýþÿûüÿûúÿúúÿùùÿù÷ÿù÷ÿüùÿÿûþÿûûÿüùÿûùôîÿÿöÿþôÿýóÿüîÿ÷çùçÓéӾϴŸ¶š„•u`yVBlI5mH6rM;uP>mF7iB3gB2jE5nI9oJ:pK;oK;eA1eA1cB1cB1cB1cB1cB1bC1\G6\G6\G6ZG6YH6WH5TG4RG3PH3MH2fdM~~fprZVX@IM4HL3;E*A.;>+9?59?59?58>48>47=37=37=38>48>48>48>48>48>48>48>49>89>89>88=78=78=77<67<66;55:449338227105//4./4.-2.-2.,1-+0,+0,,1--2.-2.,1-,1-,1-,1-.21043376598:H7=L9@O<@O:8F91?2,9/.5.-4-,3,fcTfcTgdUheVheVifWjgXjgXifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWkmWioUiqYgs_bpcgxr‚”– ³¹ÁÊÑÕÜäéðöõúþùýÿýÿþÿÿýÿÿúÿÿöÿÿôÿÿñÿÿïúýèò÷àéïÕàéÎÙÚ»ÑѵÍË´Î˺ÖÏÅßÕÓìâãøíóÿöþÿùÿÿüÿÿýÿÿÿýþÿúýÿ÷þÿøþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüýýÿýþÿýþÿýÿþþþüþÿùþÿ÷ÿÿõýýóýýõþýøþýùÿþüÿýÿÿýÿÿþÿþùÿÿüÿÿúþúöõýøôÿþöÿþñÿþïÿûéÿóàöåÓåÓ¿Ò»©¹ŸŸƒuŽrd|]I}^JrVAaE0W;&Y=(Z?*X=(`E0`E0_F0_F0`G1`G1^H1^H1[L9ZM:ZM:XM9XM9UM8RL6QL6NL5QQ9ikS|€glrXSY?DM2>G,:G+48>48>48>47=37=38>48>48>48>49?59?5:?9:?9:?9:?99>89>89>88=78=78=77<66;55:4493382382/40.3/-2.,1-+0,+0,+0,+0,+/.,0/-10.21/32/32/32.210A.5F3;M7>P:=O7:L47I/6H.3E-6H0:L6MJ9EB1;A7;A7;A7;A7:@6:@6:@69?58>48>48>49?59?5:@6:@6:@6;@:;@:;@::?9:?99>89>89>8:?9:?99>89>88=78=77<67<6495273162/40-2.,1-+0,+/.,0/,0/-10.21.21.23-12,01):'/@-6H2;M5=O7?I.9F*?L0=J.AN2DN3HQ4LR6IN0JM0ZY;miLhdIc]C_YA_ZD`[GZUBQN=LI8=C9=C9=C989>89>8;@:;@:;@:;@::?9:?9:?9:?99>:8=95:6384162/40.3/.21.21.21-10-12,01,01-12-12$5"*<&3E/9K3XW9UT6SR3KE/JD.FA-D?,A>/@>1??3>@5<=5;>59?59A67B48C57C57D3:B79A69A68@58@59A69A6:B7:B7:B79A6:B7;C8F;7B:7C97A66A16?.4<-39-270.5./51-7/-9+-<%.B3J7O7Z 8Y$8W+:U2:R8;P==O?>O=:L6@R8EX:EZ;DY:>U93J0(>'.5-,3++2*ZgM[hN\hP_iQakSckTglXhkXghVihVifWifWkeWmeXmeZnf[khWkhYkg[kg^jf]jf]hfZgeVgjWglVfoZerajwnzŠ‰š«²·ÉÓÑØÞáéìò÷úøþþùþúúÿøûþóúüï÷úé÷øæõôâíìØéæÓåâÏÜ×ÄÑ̹˾­Á´¤º¬Ÿ¼¯§Á¶²ÌÀÀÛÐÖèÞæûóþý÷ÿþûÿÿþÿþýÿüýÿüýÿüýÿþþþþþþþþþþþþþþþþþþÿþüÿþüÿþüÿýúÿýúÿüùÿüùÿýùÿýùÿþúÿþýÿýüÿüûÿýþÿþÿÿþÿÿýþýûüÿþÿÿýýÿüùÿøóøíçòåÝöèßÿïçÿûÿÿýÿÿýþÿÿýÿÿûýÿüýÿþüýÿýþÿþýÿÿýÿÿýþÿý÷ÿþîÿÿæÿÿâ÷÷ßýûââàNj‡lRM0TM0QK+SJ+WN/UO/UN1TO1SO2QP4QP4PP6QM2PO3PN5PP6MO7KO6HM6EM5HQ6EN3BK.AH)BI(GM+JP,KQ-NR/PT1VZ9^aBaaE[[?VVVV>XV=YW>XW;XW9WV8VU7QK5OI3LG3ID1DA2B@3??3>@5<=5;>59?59A67B48C57C57D3:B79A69A68@58@59A69A6:B7:B7:B7:B7:B7;C8F;76<83=51=/3B+9M*BY-Ia1Nq7Mn9Ji=Fa>AY?:L<:K9=O9DV5:@69A67B47B47C57D3:B7:B79A69A69A69A6:B7:B7:B7:B7:B7:B7;C8F;>F;>IA>J@?I>>I9?H7>F7>D8=B;>E>;A=6@85A39H1BV3Pg;ZrB]€F\}HVuIMhEBZ@9N;5G74E3XR6F;?G<>H=>I9?H7>F7>D8=B;=D=;A=6@85A39H1DX5Ri=]uEY|BXyDRqEIdA,6H2@R8L_AQfGShIMdH@W=4J329107/-4,YgMZhN\hP^jRblTemVgoZjo[lo\lm[mk\mj[nhZnhZoi]ph]liXkhYjfZie\ie\ie\ig[igXfiVchRajUerao|s{‹ŠŽŸ¦Ÿ±»ÂËÒÕÜäéðöòúüôúøñöðíðçéëÞáãÕÚÛËÒÑ¿ÌɶÉıþ«¾¹¦»´¢Ë¾®ÓŸÝÏÄæÙÑíâà÷ëíÿôúÿøÿÿ÷ÿÿúÿÿüÿþýÿýüÿûüþüþýþÿÿþþþþþþþþþþþþþþþþþþÿþüÿþüþýûÿüùÿýúÿýúÿýúÿû÷ÿúöþùõÿýüÿûúýùøüúûþüýÿýþÿþÿÿýþÿüýÿüüÿüùÿøó÷ìæòåÝøêáÿóëÿûÿÿýÿÿýþÿÿûÿÿûýÿúýÿüüýÿüýÿþýÿÿþÿÿþýÿþõÿüìÿüãÿúÝþýèÿÿëåã̌ˆoRL2UN2TM0WN1VM.UO/WP3VQ3UQ4QP2ON2MM1PL1NM1NL3MM3LN6LP7KP9JR:LU:IR7JS6QX9SZ9U[9]c?gmI€”a’¦sŸ±š«’¡xˆ”pr|Z\bFLP7KM7LK6KI4NI5PK7TM:VP:WQ;VP:SN:QL9LI:IG:EE9CE:=>6F;?G<=G<=H8>G6=E6=C7=B;:A:9?;5?75A39H1BV3Ne9Wo?Svs0wTR6gx;izGyxImRRob5s(|!frH3ND3P@La?*u90Rhsms zfHVQI@WK7=ePg`$@2zvj`Lo8@=_ zh=_>@Nr;JwNl8h_Ak-8Pa&ia*oazQO3nLpV3nMc#;-(-Mf}Nj(nVDOhhhG?l!C=_9 zBxNPgGJ+x)^z|Y@Qc_X~IfR~qf*y@zMxy`UaoG!ikpR*FYXm@c00;&ofB`T20Zae@ zhyZx~yZ;7=000CN5)oe|8GwNQodW=`vS7l?IRJzJ2mnC|pjTxcebh(Y#-%cSiuP`Z z7b`Q!_1pR|!@MD+rWkf?O7Nt`_)Y3DK@Cl_v%Yj?L-vln|NiU3GC56>#vZR;xYSeT zzg9kxeIg;}v+4}fZp;=CO!}ZOV@xve^I5TJbI0hjAJ29qt6|?Nv4=Hu-mw|)#wXw7 zrcGE_dOyyXc0TkN2-jK)#Nx$mo+$o{+odnb=di`vu#X z0hWn{KHwsY`Ry8))Y4mKBNLT;*biz`*ENJNc0eX}YWBjWpDQ%(B80Ven_7l9xEi~tOUBakRUDt5Gp0yT%QA`M3Aihd+lj0F;c{*Y$?%c}+1 zSjf?diK@&mkC(v1x_RQw@(HUrMiIjWP3uifn+WCC@j{EsXsY7DGGU#Z67@7*gAZ3P zvAy((pHsi)^MZp<`?h_926LXs4_kbhiT#V;%p77~@jjc63I^oqtAvF(Mi2LWX68OT zKr=IXt+v|b6<3sNb0zdS(i5qS6j`xR@ytg@wUL_1cFV5z5aH!r?%s=d#hB@_#>axF zZzC;2Z<;D>YN28yqAh8{s(&zS1%7=X=|wTu2Aq%Pc#lnwFylB7 z_G@u0)FINhs{8dYO&uL$WrnfFHhTY9bi z#fWZGPH*(8e@^bnESq*Hc)Wsv*(Z(HEv*UXc>7QdT^YDb`LR~ILGdw%qF8}&rL>Gi zML<^AVOaJyJM2DP(y@A)Y^^Pj3Ewj69=6aCR*QUKzvt#(^WHs>>atUA_K(CFI z$sLm{G>AJlrKBDf#>L;!< z@_;D?XeQYqO>2}g?H-*?q)BW|OxQNI=8#q^+Q4Ke{{DBr{M!s9&TV$v>9@`A_>ftD zpqnX231B0m@e+`8#dmJlKYag}?pIO@B7i~RNH79Lg;pS>rqN|rbo-m^S1K$I+$+Sp z`Y!cj(H0Im^VKOMZB6#A&s+ygM?C9w0|OQC;~^UrkCri#SLGjAicOv&T4XW5as;tVP-Uhd~r{vOC87^{^cYVlR*~xvEGCPutdd3y-8IJT~;QQDk&BQ5)$#7PARJ4-% zJ&=m}{ejv3`&$}ZxwOfLrI_bw^V~k19*>+^qOdM4aOjCy)bp+@u#neaT^kkPA8oh> z>k2CZ1PZA@rKtNiN}y|$c9aWsRbUqG1KfkVsVU+<^@9hSu>z#oq}dc=PgT~!xrB|F|s>0EK}NNVqVHT|w81;5J&s+6^0=^pC<3 z$%B4Er|H<7$?{5hcfCYi#*O$evm1BP(t8}k&mY2NDk5WR>)FD&Yy`3?eSd<*4qDR* zKe;V0*wkZM=9rK^4ZHB(d(p7e^(jA|pO zXG6)4&DBrpYrC2-m;y=zt<4&(SMMBSy9~bVH=c3pL61)ej#>lft@0neE}sc1i|_Iq zn!ht}?;*B0m2GbGw>kBh^FwK@{@{zczR~P_{&Ku{$L@Y6$uzX;s5BufJ*%Ik%9&J= z;H%EuQ+Tnb?v`~?E7ZRA$##XuPQ{%OO?gR6V$csJ5wXak^I61}&5bLt*r8W@{ohUh zw>tsCkSORCP6)T)q=LGCZ9pEWSt8U!A_)I!U9eo_uS@K~#z&dp5aPy-O|kZOp*H0j z%K)m5a`J^jWh3iTafQ11iea)UQ!;U#JUz5rWL9%evijJdo<6t^#+@YNx^Z2#IBnbD z(C4wJ7q{3U3I!zoyoD`l52k)mAJMpctZ%ynKvDwLZq4-y!UU2jCP0Ih?duNmy+^4_ zp@%C(PLodM;gCevi%cbwa$6+`toqPQgvlxlGhe-~9*5Dqw;dr6e>zqw8efo1)j7^< z`;#unU$4+SWKa`Giq0WbMKzH!N)fykkB7$coO91p8}l!~SsCKGg3CPRhLflT?j0t) zn2x2OfH-YClN#E8&YWDH{Pp?H8=KV^5yN$iaZkLI{`6`06;DRR)l0!0Jtcd2zP&4PkBj! zQ@5XrrEs^C&HKb#m30K zxC`FSFB&ejpJoV|Oe%PTs$3%7Bi&XMpG=+A))kz`&~!O_EH~^dP2ql`p4#V~payJ~ za;e*6(IhZKChDTvJGOD}LdyhtJ~ZO1-iWHF&G8%@c)TVO?f?sKiABG%0a-e#^ZDzm zgvdX392PkpNj%?WO@G{hDAh4ENCTPD0hujr8+R zo6RO{5hU#%s8^MW)$^;XaWx^A06i=FuN2OasNDX_2*Jf?N_K&}7LP+$UL)!XwGYcX zsTI^(6$7*`0fsMXUp+p{;M)sM#Vwa)Z`WEQ&>2W9@}dsoNt@1fvtg@!I{#dQ_D zKW@g{XC@p zFuDuJMUX$?>iOCz9`@o@WW%FO)wWZ_BlAew7rO_Fs$cc67Tu*w!`8}A%^9^;(7q4r zqBX*UCUF@Ni0!bFg9Z?&t$HZW>6DheIe(n?A%hSpF zRgU68+|whT9v7U-*3e59^0I;xzs++&pDVOjVAo^c6&P3FfBJ0z42neQDp>uu>A1F2 zs0M$%-5#GcV~3{npyasc`1D>kN-E{(&q3*c%Wy}hB9rxEElQp?ckwpLu>s|R3z${^ zTzpb1;X=lq<7s5{am3Ec&igyA?tOjiV;RZEb3+c#JIG1Bgnbo#-<5RJ-4Qr#LeP3q zq|0`xPSyVEc2=OgZ`E-=c9_^b;oVH6`RmuguCItuxzV0CY zE)@v4a*`_}fnFQQR9z2Z<>2st>;!ruJvx93f~gP3O5jy=Di$y{+vyBiaolB^H*Hl6 zGr^|HKyGxeQKg;hd3$kHd7NX0aHu=z)=G$8AN>uK`5}N;@&ba6u^hl7v!d#b;kw`9 z+YX3Z(5RTN*tpSNfL^Z%yK;rS+M=&M{EQzL(Sy=IPk#m5iQyd#dBFe0OwqENrJRu16pnnObI4Tc_RYBoq zGMuCL_%1@CCi_+BNETm=$A_0n95S{FcXTfe_d35I!&b>GMUm#}QGx_Itxc3m+j88$ z@OD>34*SISMNS(D!){|lZW0kqHD{MpqYG{>yYoJX!T;s+IL?%nVYgr3WejZ0HLrVA zvWq#_wq=b>`+a9he_dZ8?RkE@0l|7Hy6WbqOeVy#)?k`JBOX!k=FO;Utje&=*gDxS z)1xnp35Pu9{bkvf^x3Qi=e-#P@jSK zbGtGm@tCM_qu+U?mYLOm=pk$kYWh4DS@!KB`XjU2M!i0u;{!aM_AIP)FRDSpFnUnm zA1`ytF1{64P9Xezi_hkUc}!G3Ll|pK)I+^08R*E{9>$ua@}z3F-3qXo9MU?3C@D78 zB`+ag2~i?3pj?s{+sB5hl&NBJ-8wugzY#>~n?XiQG}KNxUCcAVUy&aXp##FsN8L2B z0pAgj|CX6)v`XMy{X1}>I|nSdP}o4blHJV0|F#(sY7D7Oe*ItuF(@xw&9~{)&9S0l z49w7x67+*vf8p~Tw5>pgulQ>&4jJHP#|CDM`0DTd;+%oh8N}W46`PxtjPee76~J9DA9UwyblfpauCtd`VG6>MZS>B`7X*YpNHR4OX-;qF!- zj=efy>O)l)k#RwN7Kt>+gnS*k1uuLj*T!(=nV(5!sSk_ly0crL8_R%Daa6SCYu)^u zUqxl`IHNNe9W^=|%?=ig@QQ7kx!*Ja;=3n##rTw47aoZlIrEhE zfOsDUla}df*ntft1Gtuye%+{+69vQ+Ju=F0d=j-;gZaY|)Z=ssh(actso;A|y;%lM zjH6Dt&qi*)F{WUlbf@3Y#839NYoM1o^JT!E+TMA3ggxLcQOOv3!!J7I2}O#PL?xOv zu=@9B0lw#9L9RQ}tap9zs+6;h)?uoq$~u0xwW?^QgoNJv*LBWY#{rfT0W{6EO49qr zZnG^z}sz1pX-r(?BWjMKI_t3Rhy-xk}eCA^fTg<2f}>~Eb$6S UV9?7uwJ&e$(diH-;xA|a1JT3r4gdfE literal 0 HcmV?d00001 diff --git a/src/SDL2/external/jpeg-9/testorig.jpg b/src/SDL2/external/jpeg-9/testorig.jpg new file mode 100644 index 0000000000000000000000000000000000000000..9816a0c6231a7c5eaafd445368a9eeb1cffc63df GIT binary patch literal 5770 zcmbW(S5y;DmjLjD7OF@IQiAkel%{kP4J8sV5JE?av`~c5K@n7n^ePbPA&}6K-V}sT z6$Ap(MS2lLiZsRb|9yLQ&)KKly>n(BX70IXelrg!N z0e1kjG&CR@YFZEoL`O$U&&bZi$iTqJ#mdIa&dberm6sa=;TM(_;}?_`f|9_4@od6bEKn7r$5-13uU;$FH z0RQv=`2Oyb8u+gO{AU0uD5v}?P-#-n?}3J#cObo3loIJvk*M8(7l0; zqpPP6GeMf7%*-t;9UnS5ySTccef|6c0)v7>p1+8UijH|1o0^uM@hUSb8(V}c#+Q^5 zh-Gi;>KhuHnp;}mclVHb`}zk4$HvJMlb@%iXTB~iudJ@EZ)|S;*grTt`gweEdiIYC z2%!8o>+kq)*#B^`{B==KQBhKX{&4{*0{?bO7Ak51IU3g62#~!Go1lCIExUF~VQm+k zkb?0Z*a0(2&mpY%RpiG%w13I|cd%#wFWG;={@XPJV59{8y*x@5fEHkX6&-NqEJ3S? z<#s$i(D{LY#413eeOAVPAa+U0kWstlJphrN%u^#VXy|6n@KTl<_J$Q*uxOI8hlbqK zDP}!=!sKQ-&!OyG_4ppirXlO<(FiKvWV~|;@?o?ctY?&aGu)#B9wM@=mIcwLXC zX;3_2+-1L{U}YJV%VV+Ar(9mj9P+K3FD_oZ%sn9Zc?1GGNv^OIRS#2&?}_TF>e&s- zeEWVW!?2H0;x#eQl%iEN_sV_eY$03yrAB{J)^xZIVCD18ug0ZFoB38Vyi9z^i#SNJ zC+SgSIV@BD^;N;TjOtGZ3D){kqoHeKjVHA@lbgPpi(M(j8Vvd{F;j}SE=gr^WJ}BCLveC z3P&@zLLUF_Gv(C!3XdJ+j0t?C_|v$Va(nw;9`DC@bw8LY6`#POjhd~@tFq-7iz7YG zkTtU2MfEHTUq3JgCC5Kpq)>etsqf-}f0+U+8~IGVZ{9T=pKTVLS1P%n`nRoZ zt8pD|uMng_I{zEq4-VK}p%+1EpmlsZNsD?1{taw00G6d&dICme;5rQtLSl#_r&SYd6hX$**^2 zH*IEu^m?-&r^PP)(sh`8Q*Y<(R^}zSW;=|S$O~A5?{sZLJ%1-@m|!JaQpSUFKFvkb zRP-E4Hy+vC$C)lH*A_e%QX1Q^q_RwCap4keiOC9=YTSFgLWB6k{RPB1SXnHI)!7&( zt8@8qIRb@4xYr&jwzcWg53p2YELbv=nH;vT)@B7?Y1~JN5zkNj6ioR{`Y7JyT<1S0 zcjNuBnNcn(`=20wO1W-Drx;31XXH1v&)G4!Z~5(qsx^mYW|=Y~0rtQ10=e|&qX}S# z;fc6x5p6KDwkmcT-y9|NB)Jn8?~AN*nD4q^83u7x!6t}!wAXrd)S#4vuW4iMP4PE% zwE+(1IjLy9Px9eV6$ggnFO(Z-Q*j)v!mj&>$Fb{ZTO0p=Y+4guzb0}D)W)}ILL+`@ zvG}*DvB(EPPkBmSfuCkiVDX9Hi5jnx`tm0Ar6`dSSe zTe^G1UF=1*cY7FW6PU^g%DQt6Y5!?Ly9}3VG*(G%;>pb+0~tzw+B)4;9_^TlMg&f$ zi})%ePJ~P+Uiq-orP-jrEZ1Vv1->?;g(2wjub7I>t;642&%^b){6@UdLFqTF_>}HP zttdWbnQZtF^wP#B)!V%&y~4k@_0@BqdJbNnuJ8Hi*rm&U15*ZJvmFLL$pMR(4UIai z_2Pu=SPAkz-W!88Ji4 z=6=P}UY+>du6_5RSTz{+o+iAX=X?%1h|&pB^v0aP*fY`#`W4N5lwJ=gXsTi*&Pz}( z9}Iv51Ac6#B7N^VJW9~c4ElAur_q6PG0j{%ub9}s)POUa9?8nq-s&svCKA_G2wwiA z7r6!bc+8pU_$&UEMbv5!tta<=I_VA#si{19xo7EF_Itk7CaFBhbMEpsw+6F#nuSqb zBOwX)m+f$JpuA9%74O~NVhg(N z!);TRtT_sKZ}b+Fy~;rv7)I#__*ucjs{(_;!Is*CgSu2Jp(aJ9oMKqv$i8F(7=3C2a8fAqv3w@#8 z?@?>5Ldmi^T@gokWB}JN$Yb*P<_{>^*5Pi)E#ByN9WFzvIQD*Njpo9xO2fbbj@6G3 zg?4pjzFf3oRVaiVz0C5{^V-*wj4m1^W4Qa|^A{8zzc%9c)5KnX~U+JgGovhEM9a0rk{v4j7YErx-q^+CRPLrTSK6+U<}KWDn(Iep0~W4hy`HM$wM=!75?hj?5S zdAXw8JBB{QhC5lXL@gYxjl$~zOm3ULMpEsz&TI=Y$h83b=)Crd9m97X?QH$WMeSQ_ zZmet2gJ{rL?9NZ$n`;rPuU$zj&32M@FLHnbRaQLK3CL6cWHQInAb~Sbc?6v|NOGXC zsBNp#kkST1e zn^y$BOY;a%KnEmSHDxyOBOM=-pF}F#1S)o$W~iLsJyIXG;Lm!O%oAuF-z->%H>qE1 z*gfLJxBvYsi|zv;dFh+=Csm`Rb$0#1vvX!~#yPl_pXTb1<-Auz6fTWX-pq;(Xa+nB z;X~8hmh6lIQE_ASL?U0_sZD3~9Zz(tgEdLNDf@=G-mT8IV?Owimz_);$@r$6FE27@ zX!5QJuSt`Dr+AP-+a=V*Su$7~j0pA$Twb^KQ=*$IJuzzZF)4HL5aC>azN}cdDS+7s zTXy{Jw|rDmrc~iU!aP0p|TJ@wA3maZdy!cX&i z>)2Pwn*- zOT^H3>#@E5|B#QLEH;nTHEJaV0Yk?cVmLU;F3-Mc?-M zx!#$gDd8JJr^l;N8_+9TsWnl`roMS9|qwB^RiK`nman zsimw9eYql-%DMLYHOs|}2W{5PId=tkWIhUT3?}|PLk;)BF+43eeMk6GRLiO{+`6&l z{JPX})>XiU)cW?la*a8>im6Xy(%y}uO&RRR2%wi0fO=Qq4`8y&?KViTG*u^MsAcGC z2@c#XVUuq_#7y51@RDc#bY_xkg|6M0rzM!avCxnt4Q4IHK}trSX`Efuo9Bg=oUyp9 z&V<=-pr0!Bh_L52Z|0!^6@5I0VHv6dCa=^J!?^>UwCS}4dBbb^Ce!2p09bxe8$oP+ zQ^y3wSF?u!_*5(V^ahmAg4y>&@I7eZTzOeQEdMz!&j<~Isfgvdbw}L8IEktF%B3>O z=(ZN8|BA*IJCW`s45N?Ig)Ny=CL0R)oNExjFu6O2-?T<59i{|Y-|F?vZ~X!6CN@<1 z$T~TzH`#AmAtH09FZXn3kO_x6H)9^fqux2kU+mjHn0|V86kTF5hrS{=^PbLGE1YO> zg*)R9Ad|kmPGvp*!hiN8td|$aJY(Rn%;jX8C&WQ8s{!3>{nJiex+-J9~LKZ zmIl-t(6iO2G-C9M)JPYSP13hN#rEY1@o-!1-fNv&sDC992>AL?nIZ2miRw9}|3`!wct9?Gw??;jC^l4)Mo9asnXP;%90t*kP?|3D(S59YV_ZJfxdCU`*DVy1U zP~@MwK9yWub!i&$Rho6`)JOt*anY)Ib6M4LfrU2r`ftl?f(j@~^_E{ejvFDaOw`-M za>%(qh14>oce;+033>j=Ia8=qF&GdS`b8|Zfg#0;@7rv=gM}>VI4#XgAj2A< zteKH4Y`>7xL~ZyqK2>fY1f z6F@r?y@ifXMS6-UajC^ncAyJ_m1^Z*w<*=P*oqfBDa-S=>_TnsY@beun|WO+B9P1# zbm@ar)9P7r{3{(2Ei*LcZDXGF#dy?*>O|``@wxe&54^6eLa&|e{xC=z{9t5~*HEs} z(J^g7#peO}yq^Qv{U$YX!BtZ!9H>cKLrUF9TQW6fzmq=I4O-?{5nX_nmuAW4skXORozZcF{OUWbLROcn97_yI zm!L%NB|^;Cm_DE(mZHP>vKJi%?^>z*DM9_?2uW(3 zp;cNLPnee;G0$whk`GRy?866LDlh7&B8pVN9)MOWSmD#SAP33u6X7wLDch<764En` zOCo>O?1huAVA~_gAZ|5i?EXV02}s&ZEBt9Esx_6Xe!sEF{QO<#`j_!N0`X3Tkvr(M zi0kL`5z%3Z;saCzT=lzto4flIw}h_ar=6@TP4402N05-o;BCvy z7r{XqaHl5Au`9K!%dDodQEB>muEO-ALJ75WBmsK^XVKT#axRtFkNP|g$g@~l>Fc1e z7|)g9h?xK)by7j8gLT4cCzq1(G9n7{tn6fiS$)!fp=8WSaIn_DFUPcg1#-bO)1}Fn6j7fX51NCTRr;^`PxmHw!KtSeua$3zrJ_lWSZ( zZ#r(9f7azW1%>yP6X|s|tZt&uBT=f$qvW7YDL~Gbz(EGL@~ppxY?dq6T4Hx$C6r zd|~6eh=)dBHMp1w8s+`J;EQoP)HAL(=gsp{fd^veoliA0c91O1mvt=%D@C+S%9-Mb zx6i8$`#xmyr-OJ^Cw&v$7mh}vEm6d`R@PHKknir(w7GH{YcUR@W6&NOO-MF~dJckQu)LnE}U_{r;`I})_ z#TiaR$#`!ylhS8w4-?12_G(W-cm=K{!A9yAkxYrqFtUa5_}!M|h?dU|zm32t9{UxY zi#1;KXA>O{u0gy>9}xRbJ~H^e@^@17T~{1O(T5s)fEv8)P#;Bi(E~9^Pv8y`kebr9 zVoGXD?v2%4`dP75QJOCGYMml}U6*fkQ*K3GyRRmOZ@Ppsc6}|B>{ktPV9O|EqX#ng9Q(i%9Qn47NBI1q+ zKt&jNMeVq+VK9Cl6e5n7iA`KhB*%NV6vdi^ZHssX<@bX7Vx&)(zx{p1+rRDoonK3> zyH+rI;A7n7@n%pyBnJUycD&g#ZW|QFV59Ic5p^J!I<>uH-JJ2VYXt#?-}EOC8;|+1 zN?SCN)iCj@m~Sd^iEe``MX^QH{?-_3eMfdrKT3X~u~^Dsuv;8( e^;Dd4QS7i5y@D0wT$xcv%Tm0kNlEL^^nU=~nbB7O literal 0 HcmV?d00001 diff --git a/src/SDL2/external/jpeg-9/testprog.jpg b/src/SDL2/external/jpeg-9/testprog.jpg new file mode 100644 index 0000000000000000000000000000000000000000..920fee2e32b5a8ab0af796e010ee8a1add3eee63 GIT binary patch literal 5655 zcmb7{cQjmU+s0=`?^D!47`-!$(TOfvln|nKi8@;JPDG8P6J&IW9yPk?L{IeSHIir% zk>KN;^S$&#ty6@|`>s0_)UFDt%00;yCfHxQ5dJ&)qAjHQf zz{evbARr(jA|xiIBqJpuA*F-DC@2}>Om`UJ3=GU{0-Ve&e5?!%Tw>gOLP!(}#l$Hg zBQ7j0Ac7LUeF>0=h=`Pgl$MN)Rv5v65dMGHbq@eS2uK5L-~d?wAP5i#0=(`8&;tM< z9N_Ke{QoB^V#GdhuimXn;{b) zxA>^!0F~>|#=Atb8uQ%#4<8Ve*CP{t`&F6yws-GrC25R0RtHy(444airxDB*!+$yQ zs8Lcfuwya)&$wq?aiG(Wx5u+&x&G|)iW(T*!Is$@T%v3uQ7QV zSY6Q+{W7ml-j~yTEszX*G543_ z3pU59D;JtKdx2UzU8l3Z+NFHP#m)1K?r6Vro}89gY*lj;$+0~O5Lb;X8f9)zmYny5 zxXzRTd4;$oJlNoQ1AX_z>|_On(|XG4OW6or^s3rS2UqWcPwIRNW-Rt*E_2o4>$pX6IvCi#4zi)NLHf8f5&oNjCP44XnNE;8nZlJZj8y zIIj%9zhWWgr*=h8qL{|3ipB_H>7)kgPUQG^U)b)+NHtOk?g6heDISj_W>=2I`1s&> zXU?lYhVLxmjymIiUIE+4+~u$o0we1H6tEoy7jioPz#7oI@Mv4&c$`O|YH0$u8>{hv z0iYY>;o#ujIPC8Nf&dU4TriXwfy9Hc2#d%ounJL9p>DiKcw<)}9_T7A16Womz{E%* zoRp-(kbAO%JE)s4)+|@Go(UH*TGF)M*0hOMs!9-CUKNHF^_L3iyew8v<1zera}zj9 zod&q{Y6f8s=f2s!?>AiVMtt1i%}N^RRQ7(&Q&zs?%7P0D(xrw948Dw)S?ft+!a;PG zy7HFzU9oE^V5HIXmR-UETJ(hHS=vjQ%5&;_-+*Tb z)dlPlZJ(x0qxmZNpXahKvBGFuBT<&Id*7?IIpSqSbmW%cTV2yuJ0U zo*DXlL>;@lt9wDkP_jbfUDFLRLKfICysWy{9)0%tSd=Ai{ zHQtsC*ycgNv~7?iDGXg?i&-~ZvU9Pg2TSXbzFs*aaGGPB$BIC(^g5Xaxp{&!omvXM zJzA#_!t%JmU&ZQqbHbqs+ooF*J+9_GM&Q@=KFu8u_uk#HI+=(uy#`cSXJIy{^Zg=K zf3mx7RQM&lAo}+Coa~Kg=KbI#Z4!O`Qq%Gb3Wj%#gvR-ITR2Qzo)@0)6T8%zua3iD zm~M~X==+fsy1o@7Q6d7RO6RQJ4?4vC1w2sjZAGICq03PV#dETu z(5jbLxp90$dlJ1LA~dx{o<2P>Sg8awr|C;>dAUM#6;U@hGWuSrjmTd;NyMa=@7#qZ2(gnHuh7OKvDkU|(H&NT;>V z9>jK%1rDoaO=zRwIy~myZ0PGNhn@`BD0{Vx5WX(^$XI0J$J`==`twr2!{IETja)!h zgZfFvxrDpn6=@|y?B@DU%FmTXteI^@#Y6jOb)p<0Odd(Pc3l9^{BPP;sHC=Cge&QD z+m)uUwziZ!+6tp(*0Rozd24%lV=41PeHS^BDPq2L{fFCe{6slKIb>)j<&7v#!J=lGwIQ+~ zPVsAisW~;v2ZCBUNdc3^E54err3^0*hc*CjB1mAlA7la z^3*{S8$CSOp4WEN%acv9FW6ZpsBol1y2j zkOosgsF}h~nEoN$KYRla{2R4E02l&dMnHv-Eb_WmICoivtuY>9$^Q}#Uk>yeJVnFg zN}ON9bKoQD_Q9AJHNT~rmfr0g_3I&2y8KyOO&wDdrwxA&x&Lom^x?a7ygAJ3l1&|| zWq}^y`<4g0$EcB>vpuNeJkFnIT90bfP%6wR)r^W3O#h2`&6`%i&$uR`g0qAdQ>}p}4E`b*lFL~mVa1576iglnHr77n~22f>~ zoi_q3^QRfep4YsoQD#it_YsDd0lb}uLt>}lE)^_m(79e|U)baea}N~LnxDE`_xWK2 zdKW#T5UtuAM2d}kAdHPB{B&NGl~B_IclmV8t^()aJXNIb|7|x7@1GbV@|>^83f@{3 zEmodk8wy2G>xXgmqp_^2cfI?M3LtiJc=XnB$~obR?~xgYsBfk7P?o6jE94Yh*9wc( z3kEMiYbM)8u-({SZHZ1yl#yuVm>C<5I;JzY4DiT=IG<{>->ul|DE!cxCvSj1A(>tVq$Uy>U7nhtnY7Ej6Nus<^>{BMlP##&q`)vY zy!Q(lT%e((bR5L$m#};9W5e#mvAs`l`YhS6_<`Ts()tJjz3>V$HO?U<7Z0`-^!|X` z^-b3-t)o7h?iq)oOd)UAsXW8=)f+!7LfA(%ds1&!);fz1li+l!dR8z}ddTNKe)YZf4*yfsHGm2297AF(7tHtJz7@gFO4K!gnV>5$RPF{BtdQGT z*uD2V2!I?rCP ztBYn{#&Ff^hJ*-dt&a~i6`x8pCr0a%>cIk7vioXws#3k<+^2%V>yDmxW^&>%kGp$U z87Dwqyngo9HcO@TjM>)w8TE^ULj{#DdL9;CB`bs0N>1i*tuV zO`Hj{S5r^&=C2$3A{FbkbklV5EMvt54za2LK0!AQp<*oi{JZ>Wutif03@RipZ z-mWRtFY&?q!_?OYp3ht?4>2_7Y3dLwUZF}2>C1cj}>>(sPdmRFjM=GrOR}xOxAsp zlx)v6dN&Yu07EbFZ|Gy&&)`3vs4bNREa?K*mVZSAIBy}AK=~0oThjK zk#&nr1Xmjc8K!rR_wf$}xoo@=)`PI|zxbuvFkgK!H+$s--#P;X#J%k!{+TWSH(7EM zCE(jAnXK(*UOPPcZ=irrrH1=5Lm}#eapI%OI^|0!o85Fet$40dO*T7aqbyugB_Nk@ zkMSD^_w%-*in4g;450{55XV}$-g{aKr1=qmN8*B1IM%Xn6pQzRIZ7-TAwzRiFCrMM+5CtuF(A$UM1HR@ywx&-|gs9wG zP3tNtfttk|7?yUkPCX?)0qi?S63#lj^2CF5QR{2Y>yWcL6-E;qgpM`|^!wpbY&+{; zBxbbn5OiX`SW&rvoPJQIYMc8bih=Pp>bi^3rlsHHOD>d3K&bV+d-ptq_<}Cd56to8 z)d_-G7ro1rghrcQ@|RAdO#{)jN;7-UQ*d=uM@6~k%_0?z-f7jsC>Lt(-t#)l;Fhl5 zCuUWIP@1y(D5BBSnH#-Nc6)x}gs>9N#1@Dd`E`O}e47loCV{<+N+qq)kAFZcAH3g` zR<)`^W(c-4kaRPP2Y1nnzbiLl7N+q@q9Wrha}l6IdQVCJW0_ z#cqY@o*GC{f$c0DSq(yeamT+QLUX7Lio-C)29?M?V)UnZZHQwFK~`XxMO?JUKD_FP z@lJ1nlqGFcT5?UfQN?mUT(G_7sm6dV3nS)?rF||#XjuV>O#eGrM}I)aEY6KLr2*#{n4BAcvp+nOGQ2pnRSxj z2qpvLP`m~4k(AM91$N_@8T2Hzt{LOq*WF{j;W67n?DYc&P^*<64hUs zn_IokL(L3#0tX&KHo&Gqafs6I7td!I)VAs#0NOu7)2V+(mVA9~-)xlL{~&Nw`iw(p{8zlb#hs9CFYq;vGqJ%{<(K=O z^@464$F=e@WU1>VuE0{kTk5r(7F%AEC9r%YzR|shJo{i9rcA@M6Z9(Nu%Hq!QpQLl z6I1I=)ovp^lcjLj!Qr~`M$>s~eV;FFp7RPitYY*=1tvr9;u5Qj(mR;WNp`_}?S0*NZ!0O17jS5$qW4qOgdqc(E}HrWIl;#kEx#ljhbX~C zsF5pQ1Ii$E;zqw^G$J0cwP$(_Pm4b}xl>l{n=!JQ?H~xAq1vSpBXbRji@5qGIxCp; zTLGcJ8iU;&IZ@!sS}N*QA1sz<9}bJGA;PHO8k-c@8%b@6d17(T%qj7qUYsZ0?6z56+I?~sasnVb9`n?ZjVtZ3B7%oF~GNLhe#LwZ#q;};^oZisv30;4}CYxss%Jin` zJ}ZSZkL0KdZN}0x5OJ4Su%;$1BJvgNy`Pe@RVcB;2Gwk@0U%wNCx0E^V&GL8LmRKu z-sSM6qzFZ{UIIDm+n#|kOp)bT#;B*P(fM$jQr|k)hk>_=uK0@ZWl@L*4 zD2uZ*`|z;_)RsDT;*`4^IDXN**v3#jGDu;n$2hu2e_hm9F0NmR5z)R^LnX>9WdC4L U9#E?5!l?r;*e8trGk!h)KW4JmQUCw| literal 0 HcmV?d00001 diff --git a/src/SDL2/external/jpeg-9/transupp.c b/src/SDL2/external/jpeg-9/transupp.c new file mode 100644 index 000000000..d0013cce8 --- /dev/null +++ b/src/SDL2/external/jpeg-9/transupp.c @@ -0,0 +1,1597 @@ +/* + * transupp.c + * + * Copyright (C) 1997-2012, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains image transformation routines and other utility code + * used by the jpegtran sample application. These are NOT part of the core + * JPEG library. But we keep these routines separate from jpegtran.c to + * ease the task of maintaining jpegtran-like programs that have other user + * interfaces. + */ + +/* Although this file really shouldn't have access to the library internals, + * it's helpful to let it call jround_up() and jcopy_block_row(). + */ +#define JPEG_INTERNALS + +#include "jinclude.h" +#include "jpeglib.h" +#include "transupp.h" /* My own external interface */ +#include /* to declare isdigit() */ + + +#if TRANSFORMS_SUPPORTED + +/* + * Lossless image transformation routines. These routines work on DCT + * coefficient arrays and thus do not require any lossy decompression + * or recompression of the image. + * Thanks to Guido Vollbeding for the initial design and code of this feature, + * and to Ben Jackson for introducing the cropping feature. + * + * Horizontal flipping is done in-place, using a single top-to-bottom + * pass through the virtual source array. It will thus be much the + * fastest option for images larger than main memory. + * + * The other routines require a set of destination virtual arrays, so they + * need twice as much memory as jpegtran normally does. The destination + * arrays are always written in normal scan order (top to bottom) because + * the virtual array manager expects this. The source arrays will be scanned + * in the corresponding order, which means multiple passes through the source + * arrays for most of the transforms. That could result in much thrashing + * if the image is larger than main memory. + * + * If cropping or trimming is involved, the destination arrays may be smaller + * than the source arrays. Note it is not possible to do horizontal flip + * in-place when a nonzero Y crop offset is specified, since we'd have to move + * data from one block row to another but the virtual array manager doesn't + * guarantee we can touch more than one row at a time. So in that case, + * we have to use a separate destination array. + * + * Some notes about the operating environment of the individual transform + * routines: + * 1. Both the source and destination virtual arrays are allocated from the + * source JPEG object, and therefore should be manipulated by calling the + * source's memory manager. + * 2. The destination's component count should be used. It may be smaller + * than the source's when forcing to grayscale. + * 3. Likewise the destination's sampling factors should be used. When + * forcing to grayscale the destination's sampling factors will be all 1, + * and we may as well take that as the effective iMCU size. + * 4. When "trim" is in effect, the destination's dimensions will be the + * trimmed values but the source's will be untrimmed. + * 5. When "crop" is in effect, the destination's dimensions will be the + * cropped values but the source's will be uncropped. Each transform + * routine is responsible for picking up source data starting at the + * correct X and Y offset for the crop region. (The X and Y offsets + * passed to the transform routines are measured in iMCU blocks of the + * destination.) + * 6. All the routines assume that the source and destination buffers are + * padded out to a full iMCU boundary. This is true, although for the + * source buffer it is an undocumented property of jdcoefct.c. + */ + + +LOCAL(void) +do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Crop. This is only used when no rotate/flip is requested with the crop. */ +{ + JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + jpeg_component_info *compptr; + + /* We simply have to copy the right amount of data (the destination's + * image size) starting at the given X and Y offsets in the source. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } +} + + +LOCAL(void) +do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, + jvirt_barray_ptr *src_coef_arrays) +/* Horizontal flip; done in-place, so no separate dest array is required. + * NB: this only works when y_crop_offset is zero. + */ +{ + JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY buffer; + JCOEFPTR ptr1, ptr2; + JCOEF temp1, temp2; + jpeg_component_info *compptr; + + /* Horizontal mirroring of DCT blocks is accomplished by swapping + * pairs of blocks in-place. Within a DCT block, we perform horizontal + * mirroring by changing the signs of odd-numbered columns. + * Partial iMCUs at the right edge are left untouched. + */ + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + for (blk_y = 0; blk_y < compptr->height_in_blocks; + blk_y += compptr->v_samp_factor) { + buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + /* Do the mirroring */ + for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) { + ptr1 = buffer[offset_y][blk_x]; + ptr2 = buffer[offset_y][comp_width - blk_x - 1]; + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + temp1 = *ptr1; /* swap even column */ + temp2 = *ptr2; + *ptr1++ = temp2; + *ptr2++ = temp1; + temp1 = *ptr1; /* swap odd column with sign change */ + temp2 = *ptr2; + *ptr1++ = -temp2; + *ptr2++ = -temp1; + } + } + if (x_crop_blocks > 0) { + /* Now left-justify the portion of the data to be kept. + * We can't use a single jcopy_block_row() call because that routine + * depends on memcpy(), whose behavior is unspecified for overlapping + * source and destination areas. Sigh. + */ + for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) { + jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks, + buffer[offset_y] + blk_x, + (JDIMENSION) 1); + } + } + } + } + } +} + + +LOCAL(void) +do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Horizontal flip in general cropping case */ +{ + JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Here we must output into a separate array because we can't touch + * different rows of a single virtual array simultaneously. Otherwise, + * this is essentially the same as the routine above. + */ + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + dst_row_ptr = dst_buffer[offset_y]; + src_row_ptr = src_buffer[offset_y]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Do the mirrorable blocks */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + *dst_ptr++ = *src_ptr++; /* copy even column */ + *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */ + } + } else { + /* Copy last partial block(s) verbatim */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); + } + } + } + } + } +} + + +LOCAL(void) +do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Vertical flip */ +{ + JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* We output into a separate array because we can't touch different + * rows of the source virtual array simultaneously. Otherwise, this + * is a pretty straightforward analog of horizontal flip. + * Within a DCT block, vertical mirroring is done by changing the signs + * of odd-numbered rows. + * Partial iMCUs at the bottom edge are copied verbatim. + */ + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + /* Bottom-edge blocks will be copied verbatim. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + dst_row_ptr = dst_buffer[offset_y]; + src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; + src_row_ptr += x_crop_blocks; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x++) { + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[dst_blk_x]; + for (i = 0; i < DCTSIZE; i += 2) { + /* copy even row */ + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = *src_ptr++; + /* copy odd row with sign change */ + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = - *src_ptr++; + } + } + } else { + /* Just copy row verbatim. */ + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } + } +} + + +LOCAL(void) +do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Transpose source into destination */ +{ + JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Transposing pixels within a block just requires transposing the + * DCT coefficients. + * Partial iMCUs at the edges require no special treatment; we simply + * process all the available DCT blocks for every component. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } +} + + +LOCAL(void) +do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 90 degree rotation is equivalent to + * 1. Transposing the image; + * 2. Horizontal mirroring. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Because of the horizontal mirror step, we can't process partial iMCUs + * at the (output) right edge properly. They just get transposed and + * not mirrored. + */ + MCU_cols = srcinfo->output_height / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + /* Edge blocks are transposed but not mirrored. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + i++; + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } else { + /* Edge blocks are transposed but not mirrored. */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } +} + + +LOCAL(void) +do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 270 degree rotation is equivalent to + * 1. Horizontal mirroring; + * 2. Transposing the image. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Because of the horizontal mirror step, we can't process partial iMCUs + * at the (output) bottom edge properly. They just get transposed and + * not mirrored. + */ + MCU_rows = srcinfo->output_width / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[offset_x] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } + } else { + /* Edge blocks are transposed but not mirrored. */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } +} + + +LOCAL(void) +do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 180 degree rotation is equivalent to + * 1. Vertical mirroring; + * 2. Horizontal mirroring. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the vertically mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + /* Bottom-edge rows are only mirrored horizontally. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + dst_row_ptr = dst_buffer[offset_y]; + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + dst_ptr = dst_row_ptr[dst_blk_x]; + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored both ways. */ + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE; i += 2) { + /* For even row, negate every odd column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + /* For odd row, negate every even column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = - *src_ptr++; + *dst_ptr++ = *src_ptr++; + } + } + } else { + /* Any remaining right-edge blocks are only mirrored vertically. */ + src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x]; + for (i = 0; i < DCTSIZE; i += 2) { + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = *src_ptr++; + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = - *src_ptr++; + } + } + } + } else { + /* Remaining rows are just mirrored horizontally. */ + src_row_ptr = src_buffer[offset_y]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored. */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE2; i += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + } else { + /* Any remaining right-edge blocks are only copied. */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); + } + } + } + } + } + } +} + + +LOCAL(void) +do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Transverse transpose is equivalent to + * 1. 180 degree rotation; + * 2. Transposition; + * or + * 1. Horizontal mirroring; + * 2. Transposition; + * 3. Horizontal mirroring. + * These steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_height / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_width / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (y_crop_blocks + dst_blk_y < comp_height) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + i++; + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } else { + /* Right-edge blocks are mirrored in y only */ + src_ptr = src_buffer[offset_x] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } + } + } else { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Bottom-edge blocks are mirrored in x only */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + i++; + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } else { + /* At lower right corner, just transpose, no mirroring */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } + } +} + + +/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec. + * Returns TRUE if valid integer found, FALSE if not. + * *strptr is advanced over the digit string, and *result is set to its value. + */ + +LOCAL(boolean) +jt_read_integer (const char ** strptr, JDIMENSION * result) +{ + const char * ptr = *strptr; + JDIMENSION val = 0; + + for (; isdigit(*ptr); ptr++) { + val = val * 10 + (JDIMENSION) (*ptr - '0'); + } + *result = val; + if (ptr == *strptr) + return FALSE; /* oops, no digits */ + *strptr = ptr; + return TRUE; +} + + +/* Parse a crop specification (written in X11 geometry style). + * The routine returns TRUE if the spec string is valid, FALSE if not. + * + * The crop spec string should have the format + * [f]x[f]{+-}{+-} + * where width, height, xoffset, and yoffset are unsigned integers. + * Each of the elements can be omitted to indicate a default value. + * (A weakness of this style is that it is not possible to omit xoffset + * while specifying yoffset, since they look alike.) + * + * This code is loosely based on XParseGeometry from the X11 distribution. + */ + +GLOBAL(boolean) +jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec) +{ + info->crop = FALSE; + info->crop_width_set = JCROP_UNSET; + info->crop_height_set = JCROP_UNSET; + info->crop_xoffset_set = JCROP_UNSET; + info->crop_yoffset_set = JCROP_UNSET; + + if (isdigit(*spec)) { + /* fetch width */ + if (! jt_read_integer(&spec, &info->crop_width)) + return FALSE; + if (*spec == 'f' || *spec == 'F') { + spec++; + info->crop_width_set = JCROP_FORCE; + } else + info->crop_width_set = JCROP_POS; + } + if (*spec == 'x' || *spec == 'X') { + /* fetch height */ + spec++; + if (! jt_read_integer(&spec, &info->crop_height)) + return FALSE; + if (*spec == 'f' || *spec == 'F') { + spec++; + info->crop_height_set = JCROP_FORCE; + } else + info->crop_height_set = JCROP_POS; + } + if (*spec == '+' || *spec == '-') { + /* fetch xoffset */ + info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_xoffset)) + return FALSE; + } + if (*spec == '+' || *spec == '-') { + /* fetch yoffset */ + info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_yoffset)) + return FALSE; + } + /* We had better have gotten to the end of the string. */ + if (*spec != '\0') + return FALSE; + info->crop = TRUE; + return TRUE; +} + + +/* Trim off any partial iMCUs on the indicated destination edge */ + +LOCAL(void) +trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width) +{ + JDIMENSION MCU_cols; + + MCU_cols = info->output_width / info->iMCU_sample_width; + if (MCU_cols > 0 && info->x_crop_offset + MCU_cols == + full_width / info->iMCU_sample_width) + info->output_width = MCU_cols * info->iMCU_sample_width; +} + +LOCAL(void) +trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height) +{ + JDIMENSION MCU_rows; + + MCU_rows = info->output_height / info->iMCU_sample_height; + if (MCU_rows > 0 && info->y_crop_offset + MCU_rows == + full_height / info->iMCU_sample_height) + info->output_height = MCU_rows * info->iMCU_sample_height; +} + + +/* Request any required workspace. + * + * This routine figures out the size that the output image will be + * (which implies that all the transform parameters must be set before + * it is called). + * + * We allocate the workspace virtual arrays from the source decompression + * object, so that all the arrays (both the original data and the workspace) + * will be taken into account while making memory management decisions. + * Hence, this routine must be called after jpeg_read_header (which reads + * the image dimensions) and before jpeg_read_coefficients (which realizes + * the source's virtual arrays). + * + * This function returns FALSE right away if -perfect is given + * and transformation is not perfect. Otherwise returns TRUE. + */ + +GLOBAL(boolean) +jtransform_request_workspace (j_decompress_ptr srcinfo, + jpeg_transform_info *info) +{ + jvirt_barray_ptr *coef_arrays; + boolean need_workspace, transpose_it; + jpeg_component_info *compptr; + JDIMENSION xoffset, yoffset; + JDIMENSION width_in_iMCUs, height_in_iMCUs; + JDIMENSION width_in_blocks, height_in_blocks; + int ci, h_samp_factor, v_samp_factor; + + /* Determine number of components in output image */ + if (info->force_grayscale && + srcinfo->jpeg_color_space == JCS_YCbCr && + srcinfo->num_components == 3) + /* We'll only process the first component */ + info->num_components = 1; + else + /* Process all the components */ + info->num_components = srcinfo->num_components; + + /* Compute output image dimensions and related values. */ + jpeg_core_output_dimensions(srcinfo); + + /* Return right away if -perfect is given and transformation is not perfect. + */ + if (info->perfect) { + if (info->num_components == 1) { + if (!jtransform_perfect_transform(srcinfo->output_width, + srcinfo->output_height, + srcinfo->min_DCT_h_scaled_size, + srcinfo->min_DCT_v_scaled_size, + info->transform)) + return FALSE; + } else { + if (!jtransform_perfect_transform(srcinfo->output_width, + srcinfo->output_height, + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size, + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size, + info->transform)) + return FALSE; + } + } + + /* If there is only one output component, force the iMCU size to be 1; + * else use the source iMCU size. (This allows us to do the right thing + * when reducing color to grayscale, and also provides a handy way of + * cleaning up "funny" grayscale images whose sampling factors are not 1x1.) + */ + switch (info->transform) { + case JXFORM_TRANSPOSE: + case JXFORM_TRANSVERSE: + case JXFORM_ROT_90: + case JXFORM_ROT_270: + info->output_width = srcinfo->output_height; + info->output_height = srcinfo->output_width; + if (info->num_components == 1) { + info->iMCU_sample_width = srcinfo->min_DCT_v_scaled_size; + info->iMCU_sample_height = srcinfo->min_DCT_h_scaled_size; + } else { + info->iMCU_sample_width = + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; + info->iMCU_sample_height = + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; + } + break; + default: + info->output_width = srcinfo->output_width; + info->output_height = srcinfo->output_height; + if (info->num_components == 1) { + info->iMCU_sample_width = srcinfo->min_DCT_h_scaled_size; + info->iMCU_sample_height = srcinfo->min_DCT_v_scaled_size; + } else { + info->iMCU_sample_width = + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; + info->iMCU_sample_height = + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; + } + break; + } + + /* If cropping has been requested, compute the crop area's position and + * dimensions, ensuring that its upper left corner falls at an iMCU boundary. + */ + if (info->crop) { + /* Insert default values for unset crop parameters */ + if (info->crop_xoffset_set == JCROP_UNSET) + info->crop_xoffset = 0; /* default to +0 */ + if (info->crop_yoffset_set == JCROP_UNSET) + info->crop_yoffset = 0; /* default to +0 */ + if (info->crop_xoffset >= info->output_width || + info->crop_yoffset >= info->output_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + if (info->crop_width_set == JCROP_UNSET) + info->crop_width = info->output_width - info->crop_xoffset; + if (info->crop_height_set == JCROP_UNSET) + info->crop_height = info->output_height - info->crop_yoffset; + /* Ensure parameters are valid */ + if (info->crop_width <= 0 || info->crop_width > info->output_width || + info->crop_height <= 0 || info->crop_height > info->output_height || + info->crop_xoffset > info->output_width - info->crop_width || + info->crop_yoffset > info->output_height - info->crop_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + /* Convert negative crop offsets into regular offsets */ + if (info->crop_xoffset_set == JCROP_NEG) + xoffset = info->output_width - info->crop_width - info->crop_xoffset; + else + xoffset = info->crop_xoffset; + if (info->crop_yoffset_set == JCROP_NEG) + yoffset = info->output_height - info->crop_height - info->crop_yoffset; + else + yoffset = info->crop_yoffset; + /* Now adjust so that upper left corner falls at an iMCU boundary */ + if (info->crop_width_set == JCROP_FORCE) + info->output_width = info->crop_width; + else + info->output_width = + info->crop_width + (xoffset % info->iMCU_sample_width); + if (info->crop_height_set == JCROP_FORCE) + info->output_height = info->crop_height; + else + info->output_height = + info->crop_height + (yoffset % info->iMCU_sample_height); + /* Save x/y offsets measured in iMCUs */ + info->x_crop_offset = xoffset / info->iMCU_sample_width; + info->y_crop_offset = yoffset / info->iMCU_sample_height; + } else { + info->x_crop_offset = 0; + info->y_crop_offset = 0; + } + + /* Figure out whether we need workspace arrays, + * and if so whether they are transposed relative to the source. + */ + need_workspace = FALSE; + transpose_it = FALSE; + switch (info->transform) { + case JXFORM_NONE: + if (info->x_crop_offset != 0 || info->y_crop_offset != 0) + need_workspace = TRUE; + /* No workspace needed if neither cropping nor transforming */ + break; + case JXFORM_FLIP_H: + if (info->trim) + trim_right_edge(info, srcinfo->output_width); + if (info->y_crop_offset != 0) + need_workspace = TRUE; + /* do_flip_h_no_crop doesn't need a workspace array */ + break; + case JXFORM_FLIP_V: + if (info->trim) + trim_bottom_edge(info, srcinfo->output_height); + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; + break; + case JXFORM_TRANSPOSE: + /* transpose does NOT have to trim anything */ + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_TRANSVERSE: + if (info->trim) { + trim_right_edge(info, srcinfo->output_height); + trim_bottom_edge(info, srcinfo->output_width); + } + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_ROT_90: + if (info->trim) + trim_right_edge(info, srcinfo->output_height); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_ROT_180: + if (info->trim) { + trim_right_edge(info, srcinfo->output_width); + trim_bottom_edge(info, srcinfo->output_height); + } + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; + break; + case JXFORM_ROT_270: + if (info->trim) + trim_bottom_edge(info, srcinfo->output_width); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + } + + /* Allocate workspace if needed. + * Note that we allocate arrays padded out to the next iMCU boundary, + * so that transform routines need not worry about missing edge blocks. + */ + if (need_workspace) { + coef_arrays = (jvirt_barray_ptr *) + (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE, + SIZEOF(jvirt_barray_ptr) * info->num_components); + width_in_iMCUs = (JDIMENSION) + jdiv_round_up((long) info->output_width, + (long) info->iMCU_sample_width); + height_in_iMCUs = (JDIMENSION) + jdiv_round_up((long) info->output_height, + (long) info->iMCU_sample_height); + for (ci = 0; ci < info->num_components; ci++) { + compptr = srcinfo->comp_info + ci; + if (info->num_components == 1) { + /* we're going to force samp factors to 1x1 in this case */ + h_samp_factor = v_samp_factor = 1; + } else if (transpose_it) { + h_samp_factor = compptr->v_samp_factor; + v_samp_factor = compptr->h_samp_factor; + } else { + h_samp_factor = compptr->h_samp_factor; + v_samp_factor = compptr->v_samp_factor; + } + width_in_blocks = width_in_iMCUs * h_samp_factor; + height_in_blocks = height_in_iMCUs * v_samp_factor; + coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) + ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, + width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor); + } + info->workspace_coef_arrays = coef_arrays; + } else + info->workspace_coef_arrays = NULL; + + return TRUE; +} + + +/* Transpose destination image parameters */ + +LOCAL(void) +transpose_critical_parameters (j_compress_ptr dstinfo) +{ + int tblno, i, j, ci, itemp; + jpeg_component_info *compptr; + JQUANT_TBL *qtblptr; + JDIMENSION jtemp; + UINT16 qtemp; + + /* Transpose image dimensions */ + jtemp = dstinfo->image_width; + dstinfo->image_width = dstinfo->image_height; + dstinfo->image_height = jtemp; + itemp = dstinfo->min_DCT_h_scaled_size; + dstinfo->min_DCT_h_scaled_size = dstinfo->min_DCT_v_scaled_size; + dstinfo->min_DCT_v_scaled_size = itemp; + + /* Transpose sampling factors */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + itemp = compptr->h_samp_factor; + compptr->h_samp_factor = compptr->v_samp_factor; + compptr->v_samp_factor = itemp; + } + + /* Transpose quantization tables */ + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + qtblptr = dstinfo->quant_tbl_ptrs[tblno]; + if (qtblptr != NULL) { + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < i; j++) { + qtemp = qtblptr->quantval[i*DCTSIZE+j]; + qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i]; + qtblptr->quantval[j*DCTSIZE+i] = qtemp; + } + } + } + } +} + + +/* Adjust Exif image parameters. + * + * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible. + */ + +LOCAL(void) +adjust_exif_parameters (JOCTET FAR * data, unsigned int length, + JDIMENSION new_width, JDIMENSION new_height) +{ + boolean is_motorola; /* Flag for byte order */ + unsigned int number_of_tags, tagnum; + unsigned int firstoffset, offset; + JDIMENSION new_value; + + if (length < 12) return; /* Length of an IFD entry */ + + /* Discover byte order */ + if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49) + is_motorola = FALSE; + else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D) + is_motorola = TRUE; + else + return; + + /* Check Tag Mark */ + if (is_motorola) { + if (GETJOCTET(data[2]) != 0) return; + if (GETJOCTET(data[3]) != 0x2A) return; + } else { + if (GETJOCTET(data[3]) != 0) return; + if (GETJOCTET(data[2]) != 0x2A) return; + } + + /* Get first IFD offset (offset to IFD0) */ + if (is_motorola) { + if (GETJOCTET(data[4]) != 0) return; + if (GETJOCTET(data[5]) != 0) return; + firstoffset = GETJOCTET(data[6]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[7]); + } else { + if (GETJOCTET(data[7]) != 0) return; + if (GETJOCTET(data[6]) != 0) return; + firstoffset = GETJOCTET(data[5]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[4]); + } + if (firstoffset > length - 2) return; /* check end of data segment */ + + /* Get the number of directory entries contained in this IFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[firstoffset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset+1]); + } else { + number_of_tags = GETJOCTET(data[firstoffset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset]); + } + if (number_of_tags == 0) return; + firstoffset += 2; + + /* Search for ExifSubIFD offset Tag in IFD0 */ + for (;;) { + if (firstoffset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[firstoffset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset+1]); + } else { + tagnum = GETJOCTET(data[firstoffset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset]); + } + if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */ + if (--number_of_tags == 0) return; + firstoffset += 12; + } + + /* Get the ExifSubIFD offset */ + if (is_motorola) { + if (GETJOCTET(data[firstoffset+8]) != 0) return; + if (GETJOCTET(data[firstoffset+9]) != 0) return; + offset = GETJOCTET(data[firstoffset+10]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+11]); + } else { + if (GETJOCTET(data[firstoffset+11]) != 0) return; + if (GETJOCTET(data[firstoffset+10]) != 0) return; + offset = GETJOCTET(data[firstoffset+9]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+8]); + } + if (offset > length - 2) return; /* check end of data segment */ + + /* Get the number of directory entries contained in this SubIFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[offset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset+1]); + } else { + number_of_tags = GETJOCTET(data[offset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset]); + } + if (number_of_tags < 2) return; + offset += 2; + + /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */ + do { + if (offset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[offset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset+1]); + } else { + tagnum = GETJOCTET(data[offset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset]); + } + if (tagnum == 0xA002 || tagnum == 0xA003) { + if (tagnum == 0xA002) + new_value = new_width; /* ExifImageWidth Tag */ + else + new_value = new_height; /* ExifImageHeight Tag */ + if (is_motorola) { + data[offset+2] = 0; /* Format = unsigned long (4 octets) */ + data[offset+3] = 4; + data[offset+4] = 0; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 1; + data[offset+8] = 0; + data[offset+9] = 0; + data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+11] = (JOCTET)(new_value & 0xFF); + } else { + data[offset+2] = 4; /* Format = unsigned long (4 octets) */ + data[offset+3] = 0; + data[offset+4] = 1; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 0; + data[offset+8] = (JOCTET)(new_value & 0xFF); + data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+10] = 0; + data[offset+11] = 0; + } + } + offset += 12; + } while (--number_of_tags); +} + + +/* Adjust output image parameters as needed. + * + * This must be called after jpeg_copy_critical_parameters() + * and before jpeg_write_coefficients(). + * + * The return value is the set of virtual coefficient arrays to be written + * (either the ones allocated by jtransform_request_workspace, or the + * original source data arrays). The caller will need to pass this value + * to jpeg_write_coefficients(). + */ + +GLOBAL(jvirt_barray_ptr *) +jtransform_adjust_parameters (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info) +{ + /* If force-to-grayscale is requested, adjust destination parameters */ + if (info->force_grayscale) { + /* First, ensure we have YCbCr or grayscale data, and that the source's + * Y channel is full resolution. (No reasonable person would make Y + * be less than full resolution, so actually coping with that case + * isn't worth extra code space. But we check it to avoid crashing.) + */ + if (((dstinfo->jpeg_color_space == JCS_YCbCr && + dstinfo->num_components == 3) || + (dstinfo->jpeg_color_space == JCS_GRAYSCALE && + dstinfo->num_components == 1)) && + srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor && + srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) { + /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed + * properly. Among other things, it sets the target h_samp_factor & + * v_samp_factor to 1, which typically won't match the source. + * We have to preserve the source's quantization table number, however. + */ + int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no; + jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE); + dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no; + } else { + /* Sorry, can't do it */ + ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL); + } + } else if (info->num_components == 1) { + /* For a single-component source, we force the destination sampling factors + * to 1x1, with or without force_grayscale. This is useful because some + * decoders choke on grayscale images with other sampling factors. + */ + dstinfo->comp_info[0].h_samp_factor = 1; + dstinfo->comp_info[0].v_samp_factor = 1; + } + + /* Correct the destination's image dimensions as necessary + * for rotate/flip, resize, and crop operations. + */ + dstinfo->jpeg_width = info->output_width; + dstinfo->jpeg_height = info->output_height; + + /* Transpose destination image parameters */ + switch (info->transform) { + case JXFORM_TRANSPOSE: + case JXFORM_TRANSVERSE: + case JXFORM_ROT_90: + case JXFORM_ROT_270: + transpose_critical_parameters(dstinfo); + break; + default: + break; + } + + /* Adjust Exif properties */ + if (srcinfo->marker_list != NULL && + srcinfo->marker_list->marker == JPEG_APP0+1 && + srcinfo->marker_list->data_length >= 6 && + GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 && + GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 && + GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 && + GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 && + GETJOCTET(srcinfo->marker_list->data[4]) == 0 && + GETJOCTET(srcinfo->marker_list->data[5]) == 0) { + /* Suppress output of JFIF marker */ + dstinfo->write_JFIF_header = FALSE; + /* Adjust Exif image parameters */ + if (dstinfo->jpeg_width != srcinfo->image_width || + dstinfo->jpeg_height != srcinfo->image_height) + /* Align data segment to start of TIFF structure for parsing */ + adjust_exif_parameters(srcinfo->marker_list->data + 6, + srcinfo->marker_list->data_length - 6, + dstinfo->jpeg_width, dstinfo->jpeg_height); + } + + /* Return the appropriate output data set */ + if (info->workspace_coef_arrays != NULL) + return info->workspace_coef_arrays; + return src_coef_arrays; +} + + +/* Execute the actual transformation, if any. + * + * This must be called *after* jpeg_write_coefficients, because it depends + * on jpeg_write_coefficients to have computed subsidiary values such as + * the per-component width and height fields in the destination object. + * + * Note that some transformations will modify the source data arrays! + */ + +GLOBAL(void) +jtransform_execute_transform (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info) +{ + jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays; + + /* Note: conditions tested here should match those in switch statement + * in jtransform_request_workspace() + */ + switch (info->transform) { + case JXFORM_NONE: + if (info->x_crop_offset != 0 || info->y_crop_offset != 0) + do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_FLIP_H: + if (info->y_crop_offset != 0) + do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + else + do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset, + src_coef_arrays); + break; + case JXFORM_FLIP_V: + do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_TRANSPOSE: + do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_TRANSVERSE: + do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_90: + do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_180: + do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_270: + do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + } +} + +/* jtransform_perfect_transform + * + * Determine whether lossless transformation is perfectly + * possible for a specified image and transformation. + * + * Inputs: + * image_width, image_height: source image dimensions. + * MCU_width, MCU_height: pixel dimensions of MCU. + * transform: transformation identifier. + * Parameter sources from initialized jpeg_struct + * (after reading source header): + * image_width = cinfo.image_width + * image_height = cinfo.image_height + * MCU_width = cinfo.max_h_samp_factor * cinfo.block_size + * MCU_height = cinfo.max_v_samp_factor * cinfo.block_size + * Result: + * TRUE = perfect transformation possible + * FALSE = perfect transformation not possible + * (may use custom action then) + */ + +GLOBAL(boolean) +jtransform_perfect_transform(JDIMENSION image_width, JDIMENSION image_height, + int MCU_width, int MCU_height, + JXFORM_CODE transform) +{ + boolean result = TRUE; /* initialize TRUE */ + + switch (transform) { + case JXFORM_FLIP_H: + case JXFORM_ROT_270: + if (image_width % (JDIMENSION) MCU_width) + result = FALSE; + break; + case JXFORM_FLIP_V: + case JXFORM_ROT_90: + if (image_height % (JDIMENSION) MCU_height) + result = FALSE; + break; + case JXFORM_TRANSVERSE: + case JXFORM_ROT_180: + if (image_width % (JDIMENSION) MCU_width) + result = FALSE; + if (image_height % (JDIMENSION) MCU_height) + result = FALSE; + break; + default: + break; + } + + return result; +} + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* Setup decompression object to save desired markers in memory. + * This must be called before jpeg_read_header() to have the desired effect. + */ + +GLOBAL(void) +jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option) +{ +#ifdef SAVE_MARKERS_SUPPORTED + int m; + + /* Save comments except under NONE option */ + if (option != JCOPYOPT_NONE) { + jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF); + } + /* Save all types of APPn markers iff ALL option */ + if (option == JCOPYOPT_ALL) { + for (m = 0; m < 16; m++) + jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF); + } +#endif /* SAVE_MARKERS_SUPPORTED */ +} + +/* Copy markers saved in the given source object to the destination object. + * This should be called just after jpeg_start_compress() or + * jpeg_write_coefficients(). + * Note that those routines will have written the SOI, and also the + * JFIF APP0 or Adobe APP14 markers if selected. + */ + +GLOBAL(void) +jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option) +{ + jpeg_saved_marker_ptr marker; + + /* In the current implementation, we don't actually need to examine the + * option flag here; we just copy everything that got saved. + * But to avoid confusion, we do not output JFIF and Adobe APP14 markers + * if the encoder library already wrote one. + */ + for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) { + if (dstinfo->write_JFIF_header && + marker->marker == JPEG_APP0 && + marker->data_length >= 5 && + GETJOCTET(marker->data[0]) == 0x4A && + GETJOCTET(marker->data[1]) == 0x46 && + GETJOCTET(marker->data[2]) == 0x49 && + GETJOCTET(marker->data[3]) == 0x46 && + GETJOCTET(marker->data[4]) == 0) + continue; /* reject duplicate JFIF */ + if (dstinfo->write_Adobe_marker && + marker->marker == JPEG_APP0+14 && + marker->data_length >= 5 && + GETJOCTET(marker->data[0]) == 0x41 && + GETJOCTET(marker->data[1]) == 0x64 && + GETJOCTET(marker->data[2]) == 0x6F && + GETJOCTET(marker->data[3]) == 0x62 && + GETJOCTET(marker->data[4]) == 0x65) + continue; /* reject duplicate Adobe */ +#ifdef NEED_FAR_POINTERS + /* We could use jpeg_write_marker if the data weren't FAR... */ + { + unsigned int i; + jpeg_write_m_header(dstinfo, marker->marker, marker->data_length); + for (i = 0; i < marker->data_length; i++) + jpeg_write_m_byte(dstinfo, marker->data[i]); + } +#else + jpeg_write_marker(dstinfo, marker->marker, + marker->data, marker->data_length); +#endif + } +} diff --git a/src/SDL2/external/jpeg-9/transupp.h b/src/SDL2/external/jpeg-9/transupp.h new file mode 100644 index 000000000..9aa0af385 --- /dev/null +++ b/src/SDL2/external/jpeg-9/transupp.h @@ -0,0 +1,213 @@ +/* + * transupp.h + * + * Copyright (C) 1997-2011, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains declarations for image transformation routines and + * other utility code used by the jpegtran sample application. These are + * NOT part of the core JPEG library. But we keep these routines separate + * from jpegtran.c to ease the task of maintaining jpegtran-like programs + * that have other user interfaces. + * + * NOTE: all the routines declared here have very specific requirements + * about when they are to be executed during the reading and writing of the + * source and destination files. See the comments in transupp.c, or see + * jpegtran.c for an example of correct usage. + */ + +/* If you happen not to want the image transform support, disable it here */ +#ifndef TRANSFORMS_SUPPORTED +#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */ +#endif + +/* + * Although rotating and flipping data expressed as DCT coefficients is not + * hard, there is an asymmetry in the JPEG format specification for images + * whose dimensions aren't multiples of the iMCU size. The right and bottom + * image edges are padded out to the next iMCU boundary with junk data; but + * no padding is possible at the top and left edges. If we were to flip + * the whole image including the pad data, then pad garbage would become + * visible at the top and/or left, and real pixels would disappear into the + * pad margins --- perhaps permanently, since encoders & decoders may not + * bother to preserve DCT blocks that appear to be completely outside the + * nominal image area. So, we have to exclude any partial iMCUs from the + * basic transformation. + * + * Transpose is the only transformation that can handle partial iMCUs at the + * right and bottom edges completely cleanly. flip_h can flip partial iMCUs + * at the bottom, but leaves any partial iMCUs at the right edge untouched. + * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched. + * The other transforms are defined as combinations of these basic transforms + * and process edge blocks in a way that preserves the equivalence. + * + * The "trim" option causes untransformable partial iMCUs to be dropped; + * this is not strictly lossless, but it usually gives the best-looking + * result for odd-size images. Note that when this option is active, + * the expected mathematical equivalences between the transforms may not hold. + * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim + * followed by -rot 180 -trim trims both edges.) + * + * We also offer a lossless-crop option, which discards data outside a given + * image region but losslessly preserves what is inside. Like the rotate and + * flip transforms, lossless crop is restricted by the JPEG format: the upper + * left corner of the selected region must fall on an iMCU boundary. If this + * does not hold for the given crop parameters, we silently move the upper left + * corner up and/or left to make it so, simultaneously increasing the region + * dimensions to keep the lower right crop corner unchanged. (Thus, the + * output image covers at least the requested region, but may cover more.) + * The adjustment of the region dimensions may be optionally disabled. + * + * We also provide a lossless-resize option, which is kind of a lossless-crop + * operation in the DCT coefficient block domain - it discards higher-order + * coefficients and losslessly preserves lower-order coefficients of a + * sub-block. + * + * Rotate/flip transform, resize, and crop can be requested together in a + * single invocation. The crop is applied last --- that is, the crop region + * is specified in terms of the destination image after transform/resize. + * + * We also offer a "force to grayscale" option, which simply discards the + * chrominance channels of a YCbCr image. This is lossless in the sense that + * the luminance channel is preserved exactly. It's not the same kind of + * thing as the rotate/flip transformations, but it's convenient to handle it + * as part of this package, mainly because the transformation routines have to + * be aware of the option to know how many components to work on. + */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jtransform_parse_crop_spec jTrParCrop +#define jtransform_request_workspace jTrRequest +#define jtransform_adjust_parameters jTrAdjust +#define jtransform_execute_transform jTrExec +#define jtransform_perfect_transform jTrPerfect +#define jcopy_markers_setup jCMrkSetup +#define jcopy_markers_execute jCMrkExec +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * Codes for supported types of image transformations. + */ + +typedef enum { + JXFORM_NONE, /* no transformation */ + JXFORM_FLIP_H, /* horizontal flip */ + JXFORM_FLIP_V, /* vertical flip */ + JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ + JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ + JXFORM_ROT_90, /* 90-degree clockwise rotation */ + JXFORM_ROT_180, /* 180-degree rotation */ + JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */ +} JXFORM_CODE; + +/* + * Codes for crop parameters, which can individually be unspecified, + * positive or negative for xoffset or yoffset, + * positive or forced for width or height. + */ + +typedef enum { + JCROP_UNSET, + JCROP_POS, + JCROP_NEG, + JCROP_FORCE +} JCROP_CODE; + +/* + * Transform parameters struct. + * NB: application must not change any elements of this struct after + * calling jtransform_request_workspace. + */ + +typedef struct { + /* Options: set by caller */ + JXFORM_CODE transform; /* image transform operator */ + boolean perfect; /* if TRUE, fail if partial MCUs are requested */ + boolean trim; /* if TRUE, trim partial MCUs as needed */ + boolean force_grayscale; /* if TRUE, convert color image to grayscale */ + boolean crop; /* if TRUE, crop source image */ + + /* Crop parameters: application need not set these unless crop is TRUE. + * These can be filled in by jtransform_parse_crop_spec(). + */ + JDIMENSION crop_width; /* Width of selected region */ + JCROP_CODE crop_width_set; /* (forced disables adjustment) */ + JDIMENSION crop_height; /* Height of selected region */ + JCROP_CODE crop_height_set; /* (forced disables adjustment) */ + JDIMENSION crop_xoffset; /* X offset of selected region */ + JCROP_CODE crop_xoffset_set; /* (negative measures from right edge) */ + JDIMENSION crop_yoffset; /* Y offset of selected region */ + JCROP_CODE crop_yoffset_set; /* (negative measures from bottom edge) */ + + /* Internal workspace: caller should not touch these */ + int num_components; /* # of components in workspace */ + jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */ + JDIMENSION output_width; /* cropped destination dimensions */ + JDIMENSION output_height; + JDIMENSION x_crop_offset; /* destination crop offsets measured in iMCUs */ + JDIMENSION y_crop_offset; + int iMCU_sample_width; /* destination iMCU size */ + int iMCU_sample_height; +} jpeg_transform_info; + + +#if TRANSFORMS_SUPPORTED + +/* Parse a crop specification (written in X11 geometry style) */ +EXTERN(boolean) jtransform_parse_crop_spec + JPP((jpeg_transform_info *info, const char *spec)); +/* Request any required workspace */ +EXTERN(boolean) jtransform_request_workspace + JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info)); +/* Adjust output image parameters */ +EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Execute the actual transformation, if any */ +EXTERN(void) jtransform_execute_transform + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Determine whether lossless transformation is perfectly + * possible for a specified image and transformation. + */ +EXTERN(boolean) jtransform_perfect_transform + JPP((JDIMENSION image_width, JDIMENSION image_height, + int MCU_width, int MCU_height, + JXFORM_CODE transform)); + +/* jtransform_execute_transform used to be called + * jtransform_execute_transformation, but some compilers complain about + * routine names that long. This macro is here to avoid breaking any + * old source code that uses the original name... + */ +#define jtransform_execute_transformation jtransform_execute_transform + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* + * Support for copying optional markers from source to destination file. + */ + +typedef enum { + JCOPYOPT_NONE, /* copy no optional markers */ + JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */ + JCOPYOPT_ALL /* copy all optional markers */ +} JCOPY_OPTION; + +#define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */ + +/* Setup decompression object to save desired markers in memory */ +EXTERN(void) jcopy_markers_setup + JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option)); +/* Copy markers saved in the given source object to the destination object */ +EXTERN(void) jcopy_markers_execute + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option)); diff --git a/src/SDL2/external/jpeg-9/usage.txt b/src/SDL2/external/jpeg-9/usage.txt new file mode 100644 index 000000000..88158d633 --- /dev/null +++ b/src/SDL2/external/jpeg-9/usage.txt @@ -0,0 +1,650 @@ +USAGE instructions for the Independent JPEG Group's JPEG software +================================================================= + +This file describes usage of the JPEG conversion programs cjpeg and djpeg, +as well as the utility programs jpegtran, rdjpgcom and wrjpgcom. (See +the other documentation files if you wish to use the JPEG library within +your own programs.) + +If you are on a Unix machine you may prefer to read the Unix-style manual +pages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1. + + +INTRODUCTION + +These programs implement JPEG image encoding, decoding, and transcoding. +JPEG (pronounced "jay-peg") is a standardized compression method for +full-color and gray-scale images. + + +GENERAL USAGE + +We provide two programs, cjpeg to compress an image file into JPEG format, +and djpeg to decompress a JPEG file back into a conventional image format. + +On Unix-like systems, you say: + cjpeg [switches] [imagefile] >jpegfile +or + djpeg [switches] [jpegfile] >imagefile +The programs read the specified input file, or standard input if none is +named. They always write to standard output (with trace/error messages to +standard error). These conventions are handy for piping images between +programs. + +On most non-Unix systems, you say: + cjpeg [switches] imagefile jpegfile +or + djpeg [switches] jpegfile imagefile +i.e., both the input and output files are named on the command line. This +style is a little more foolproof, and it loses no functionality if you don't +have pipes. (You can get this style on Unix too, if you prefer, by defining +TWO_FILE_COMMANDLINE when you compile the programs; see install.txt.) + +You can also say: + cjpeg [switches] -outfile jpegfile imagefile +or + djpeg [switches] -outfile imagefile jpegfile +This syntax works on all systems, so it is useful for scripts. + +The currently supported image file formats are: PPM (PBMPLUS color format), +PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster Toolkit +format). (RLE is supported only if the URT library is available.) +cjpeg recognizes the input image format automatically, with the exception +of some Targa-format files. You have to tell djpeg which format to generate. + +JPEG files are in the defacto standard JFIF file format. There are other, +less widely used JPEG-based file formats, but we don't support them. + +All switch names may be abbreviated; for example, -grayscale may be written +-gray or -gr. Most of the "basic" switches can be abbreviated to as little as +one letter. Upper and lower case are equivalent (-BMP is the same as -bmp). +British spellings are also accepted (e.g., -greyscale), though for brevity +these are not mentioned below. + + +CJPEG DETAILS + +The basic command line switches for cjpeg are: + + -quality N[,...] Scale quantization tables to adjust image quality. + Quality is 0 (worst) to 100 (best); default is 75. + (See below for more info.) + + -grayscale Create monochrome JPEG file from color input. + Be sure to use this switch when compressing a grayscale + BMP file, because cjpeg isn't bright enough to notice + whether a BMP file uses only shades of gray. By + saying -grayscale, you'll get a smaller JPEG file that + takes less time to process. + + -rgb Create RGB JPEG file. + Using this switch suppresses the conversion from RGB + colorspace input to the default YCbCr JPEG colorspace. + You can use this switch in combination with the + -block N switch (see below) for lossless JPEG coding. + See also the -rgb1 switch below. + + -optimize Perform optimization of entropy encoding parameters. + Without this, default encoding parameters are used. + -optimize usually makes the JPEG file a little smaller, + but cjpeg runs somewhat slower and needs much more + memory. Image quality and speed of decompression are + unaffected by -optimize. + + -progressive Create progressive JPEG file (see below). + + -scale M/N Scale the output image by a factor M/N. Currently + supported scale factors are M/N with all N from 1 to + 16, where M is the destination DCT size, which is 8 by + default (see -block N switch below). + + -targa Input file is Targa format. Targa files that contain + an "identification" field will not be automatically + recognized by cjpeg; for such files you must specify + -targa to make cjpeg treat the input as Targa format. + For most Targa files, you won't need this switch. + +The -quality switch lets you trade off compressed file size against quality of +the reconstructed image: the higher the quality setting, the larger the JPEG +file, and the closer the output image will be to the original input. Normally +you want to use the lowest quality setting (smallest file) that decompresses +into something visually indistinguishable from the original image. For this +purpose the quality setting should be between 50 and 95; the default of 75 is +often about right. If you see defects at -quality 75, then go up 5 or 10 +counts at a time until you are happy with the output image. (The optimal +setting will vary from one image to another.) + +-quality 100 will generate a quantization table of all 1's, minimizing loss +in the quantization step (but there is still information loss in subsampling, +as well as roundoff error). This setting is mainly of interest for +experimental purposes. Quality values above about 95 are NOT recommended for +normal use; the compressed file size goes up dramatically for hardly any gain +in output image quality. + +In the other direction, quality values below 50 will produce very small files +of low image quality. Settings around 5 to 10 might be useful in preparing an +index of a large image library, for example. Try -quality 2 (or so) for some +amusing Cubist effects. (Note: quality values below about 25 generate 2-byte +quantization tables, which are considered optional in the JPEG standard. +cjpeg emits a warning message when you give such a quality value, because some +other JPEG programs may be unable to decode the resulting file. Use -baseline +if you need to ensure compatibility at low quality values.) + +The -quality option has been extended in IJG version 7 for support of separate +quality settings for luminance and chrominance (or in general, for every +provided quantization table slot). This feature is useful for high-quality +applications which cannot accept the damage of color data by coarse +subsampling settings. You can now easily reduce the color data amount more +smoothly with finer control without separate subsampling. The resulting file +is fully compliant with standard JPEG decoders. +Note that the -quality ratings refer to the quantization table slots, and that +the last value is replicated if there are more q-table slots than parameters. +The default q-table slots are 0 for luminance and 1 for chrominance with +default tables as given in the JPEG standard. This is compatible with the old +behaviour in case that only one parameter is given, which is then used for +both luminance and chrominance (slots 0 and 1). More or custom quantization +tables can be set with -qtables and assigned to components with -qslots +parameter (see the "wizard" switches below). +CAUTION: You must explicitly add -sample 1x1 for efficient separate color +quality selection, since the default value used by library is 2x2! + +The -progressive switch creates a "progressive JPEG" file. In this type of +JPEG file, the data is stored in multiple scans of increasing quality. If the +file is being transmitted over a slow communications link, the decoder can use +the first scan to display a low-quality image very quickly, and can then +improve the display with each subsequent scan. The final image is exactly +equivalent to a standard JPEG file of the same quality setting, and the total +file size is about the same --- often a little smaller. + +Switches for advanced users: + + -arithmetic Use arithmetic coding. CAUTION: arithmetic coded JPEG + is not yet widely implemented, so many decoders will + be unable to view an arithmetic coded JPEG file at + all. + + -block N Set DCT block size. All N from 1 to 16 are possible. + Default is 8 (baseline format). + Larger values produce higher compression, + smaller values produce higher quality + (exact DCT stage possible with 1 or 2; with the + default quality of 75 and default Luminance qtable + the DCT+Quantization stage is lossless for N=1). + CAUTION: An implementation of the JPEG SmartScale + extension is required for this feature. SmartScale + enabled JPEG is not yet widely implemented, so many + decoders will be unable to view a SmartScale extended + JPEG file at all. + + -rgb1 Create RGB JPEG file with reversible color transform. + Works like the -rgb switch (see above) and inserts a + simple reversible color transform into the processing + which significantly improves the compression. + Use this switch in combination with the -block N + switch (see above) for lossless JPEG coding. + CAUTION: A decoder with inverse color transform + support is required for this feature. Reversible + color transform support is not yet widely implemented, + so many decoders will be unable to view a reversible + color transformed JPEG file at all. + + -dct int Use integer DCT method (default). + -dct fast Use fast integer DCT (less accurate). + -dct float Use floating-point DCT method. + The float method is very slightly more accurate than + the int method, but is much slower unless your machine + has very fast floating-point hardware. Also note that + results of the floating-point method may vary slightly + across machines, while the integer methods should give + the same results everywhere. The fast integer method + is much less accurate than the other two. + + -nosmooth Don't use high-quality downsampling. + + -restart N Emit a JPEG restart marker every N MCU rows, or every + N MCU blocks if "B" is attached to the number. + -restart 0 (the default) means no restart markers. + + -smooth N Smooth the input image to eliminate dithering noise. + N, ranging from 1 to 100, indicates the strength of + smoothing. 0 (the default) means no smoothing. + + -maxmemory N Set limit for amount of memory to use in processing + large images. Value is in thousands of bytes, or + millions of bytes if "M" is attached to the number. + For example, -max 4m selects 4000000 bytes. If more + space is needed, temporary files will be used. + + -verbose Enable debug printout. More -v's give more printout. + or -debug Also, version information is printed at startup. + +The -restart option inserts extra markers that allow a JPEG decoder to +resynchronize after a transmission error. Without restart markers, any damage +to a compressed file will usually ruin the image from the point of the error +to the end of the image; with restart markers, the damage is usually confined +to the portion of the image up to the next restart marker. Of course, the +restart markers occupy extra space. We recommend -restart 1 for images that +will be transmitted across unreliable networks such as Usenet. + +The -smooth option filters the input to eliminate fine-scale noise. This is +often useful when converting dithered images to JPEG: a moderate smoothing +factor of 10 to 50 gets rid of dithering patterns in the input file, resulting +in a smaller JPEG file and a better-looking image. Too large a smoothing +factor will visibly blur the image, however. + +Switches for wizards: + + -baseline Force baseline-compatible quantization tables to be + generated. This clamps quantization values to 8 bits + even at low quality settings. (This switch is poorly + named, since it does not ensure that the output is + actually baseline JPEG. For example, you can use + -baseline and -progressive together.) + + -qtables file Use the quantization tables given in the specified + text file. + + -qslots N[,...] Select which quantization table to use for each color + component. + + -sample HxV[,...] Set JPEG sampling factors for each color component. + + -scans file Use the scan script given in the specified text file. + +The "wizard" switches are intended for experimentation with JPEG. If you +don't know what you are doing, DON'T USE THEM. These switches are documented +further in the file wizard.txt. + + +DJPEG DETAILS + +The basic command line switches for djpeg are: + + -colors N Reduce image to at most N colors. This reduces the + or -quantize N number of colors used in the output image, so that it + can be displayed on a colormapped display or stored in + a colormapped file format. For example, if you have + an 8-bit display, you'd need to reduce to 256 or fewer + colors. (-colors is the recommended name, -quantize + is provided only for backwards compatibility.) + + -fast Select recommended processing options for fast, low + quality output. (The default options are chosen for + highest quality output.) Currently, this is equivalent + to "-dct fast -nosmooth -onepass -dither ordered". + + -grayscale Force gray-scale output even if JPEG file is color. + Useful for viewing on monochrome displays; also, + djpeg runs noticeably faster in this mode. + + -scale M/N Scale the output image by a factor M/N. Currently + supported scale factors are M/N with all M from 1 to + 16, where N is the source DCT size, which is 8 for + baseline JPEG. If the /N part is omitted, then M + specifies the DCT scaled size to be applied on the + given input. For baseline JPEG this is equivalent to + M/8 scaling, since the source DCT size for baseline + JPEG is 8. Scaling is handy if the image is larger + than your screen; also, djpeg runs much faster when + scaling down the output. + + -bmp Select BMP output format (Windows flavor). 8-bit + colormapped format is emitted if -colors or -grayscale + is specified, or if the JPEG file is gray-scale; + otherwise, 24-bit full-color format is emitted. + + -gif Select GIF output format. Since GIF does not support + more than 256 colors, -colors 256 is assumed (unless + you specify a smaller number of colors). If you + specify -fast, the default number of colors is 216. + + -os2 Select BMP output format (OS/2 1.x flavor). 8-bit + colormapped format is emitted if -colors or -grayscale + is specified, or if the JPEG file is gray-scale; + otherwise, 24-bit full-color format is emitted. + + -pnm Select PBMPLUS (PPM/PGM) output format (this is the + default format). PGM is emitted if the JPEG file is + gray-scale or if -grayscale is specified; otherwise + PPM is emitted. + + -rle Select RLE output format. (Requires URT library.) + + -targa Select Targa output format. Gray-scale format is + emitted if the JPEG file is gray-scale or if + -grayscale is specified; otherwise, colormapped format + is emitted if -colors is specified; otherwise, 24-bit + full-color format is emitted. + +Switches for advanced users: + + -dct int Use integer DCT method (default). + -dct fast Use fast integer DCT (less accurate). + -dct float Use floating-point DCT method. + The float method is very slightly more accurate than + the int method, but is much slower unless your machine + has very fast floating-point hardware. Also note that + results of the floating-point method may vary slightly + across machines, while the integer methods should give + the same results everywhere. The fast integer method + is much less accurate than the other two. + + -dither fs Use Floyd-Steinberg dithering in color quantization. + -dither ordered Use ordered dithering in color quantization. + -dither none Do not use dithering in color quantization. + By default, Floyd-Steinberg dithering is applied when + quantizing colors; this is slow but usually produces + the best results. Ordered dither is a compromise + between speed and quality; no dithering is fast but + usually looks awful. Note that these switches have + no effect unless color quantization is being done. + Ordered dither is only available in -onepass mode. + + -map FILE Quantize to the colors used in the specified image + file. This is useful for producing multiple files + with identical color maps, or for forcing a predefined + set of colors to be used. The FILE must be a GIF + or PPM file. This option overrides -colors and + -onepass. + + -nosmooth Don't use high-quality upsampling. + + -onepass Use one-pass instead of two-pass color quantization. + The one-pass method is faster and needs less memory, + but it produces a lower-quality image. -onepass is + ignored unless you also say -colors N. Also, + the one-pass method is always used for gray-scale + output (the two-pass method is no improvement then). + + -maxmemory N Set limit for amount of memory to use in processing + large images. Value is in thousands of bytes, or + millions of bytes if "M" is attached to the number. + For example, -max 4m selects 4000000 bytes. If more + space is needed, temporary files will be used. + + -verbose Enable debug printout. More -v's give more printout. + or -debug Also, version information is printed at startup. + + +HINTS FOR CJPEG + +Color GIF files are not the ideal input for JPEG; JPEG is really intended for +compressing full-color (24-bit) images. In particular, don't try to convert +cartoons, line drawings, and other images that have only a few distinct +colors. GIF works great on these, JPEG does not. If you want to convert a +GIF to JPEG, you should experiment with cjpeg's -quality and -smooth options +to get a satisfactory conversion. -smooth 10 or so is often helpful. + +Avoid running an image through a series of JPEG compression/decompression +cycles. Image quality loss will accumulate; after ten or so cycles the image +may be noticeably worse than it was after one cycle. It's best to use a +lossless format while manipulating an image, then convert to JPEG format when +you are ready to file the image away. + +The -optimize option to cjpeg is worth using when you are making a "final" +version for posting or archiving. It's also a win when you are using low +quality settings to make very small JPEG files; the percentage improvement +is often a lot more than it is on larger files. (At present, -optimize +mode is always selected when generating progressive JPEG files.) + +GIF input files are no longer supported, to avoid the Unisys LZW patent. +(Conversion of GIF files to JPEG is usually a bad idea anyway.) + + +HINTS FOR DJPEG + +To get a quick preview of an image, use the -grayscale and/or -scale switches. +"-grayscale -scale 1/8" is the fastest case. + +Several options are available that trade off image quality to gain speed. +"-fast" turns on the recommended settings. + +"-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality. +When producing a color-quantized image, "-onepass -dither ordered" is fast but +much lower quality than the default behavior. "-dither none" may give +acceptable results in two-pass mode, but is seldom tolerable in one-pass mode. + +If you are fortunate enough to have very fast floating point hardware, +"-dct float" may be even faster than "-dct fast". But on most machines +"-dct float" is slower than "-dct int"; in this case it is not worth using, +because its theoretical accuracy advantage is too small to be significant +in practice. + +Two-pass color quantization requires a good deal of memory; on MS-DOS machines +it may run out of memory even with -maxmemory 0. In that case you can still +decompress, with some loss of image quality, by specifying -onepass for +one-pass quantization. + +To avoid the Unisys LZW patent, djpeg produces uncompressed GIF files. These +are larger than they should be, but are readable by standard GIF decoders. + + +HINTS FOR BOTH PROGRAMS + +If more space is needed than will fit in the available main memory (as +determined by -maxmemory), temporary files will be used. (MS-DOS versions +will try to get extended or expanded memory first.) The temporary files are +often rather large: in typical cases they occupy three bytes per pixel, for +example 3*800*600 = 1.44Mb for an 800x600 image. If you don't have enough +free disk space, leave out -progressive and -optimize (for cjpeg) or specify +-onepass (for djpeg). + +On MS-DOS, the temporary files are created in the directory named by the TMP +or TEMP environment variable, or in the current directory if neither of those +exist. Amiga implementations put the temp files in the directory named by +JPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate free +space. + +The default memory usage limit (-maxmemory) is set when the software is +compiled. If you get an "insufficient memory" error, try specifying a smaller +-maxmemory value, even -maxmemory 0 to use the absolute minimum space. You +may want to recompile with a smaller default value if this happens often. + +On machines that have "environment" variables, you can define the environment +variable JPEGMEM to set the default memory limit. The value is specified as +described for the -maxmemory switch. JPEGMEM overrides the default value +specified when the program was compiled, and itself is overridden by an +explicit -maxmemory switch. + +On MS-DOS machines, -maxmemory is the amount of main (conventional) memory to +use. (Extended or expanded memory is also used if available.) Most +DOS-specific versions of this software do their own memory space estimation +and do not need you to specify -maxmemory. + + +JPEGTRAN + +jpegtran performs various useful transformations of JPEG files. +It can translate the coded representation from one variant of JPEG to another, +for example from baseline JPEG to progressive JPEG or vice versa. It can also +perform some rearrangements of the image data, for example turning an image +from landscape to portrait format by rotation. + +jpegtran works by rearranging the compressed data (DCT coefficients), without +ever fully decoding the image. Therefore, its transformations are lossless: +there is no image degradation at all, which would not be true if you used +djpeg followed by cjpeg to accomplish the same conversion. But by the same +token, jpegtran cannot perform lossy operations such as changing the image +quality. + +jpegtran uses a command line syntax similar to cjpeg or djpeg. +On Unix-like systems, you say: + jpegtran [switches] [inputfile] >outputfile +On most non-Unix systems, you say: + jpegtran [switches] inputfile outputfile +where both the input and output files are JPEG files. + +To specify the coded JPEG representation used in the output file, +jpegtran accepts a subset of the switches recognized by cjpeg: + -optimize Perform optimization of entropy encoding parameters. + -progressive Create progressive JPEG file. + -arithmetic Use arithmetic coding. + -restart N Emit a JPEG restart marker every N MCU rows, or every + N MCU blocks if "B" is attached to the number. + -scans file Use the scan script given in the specified text file. +See the previous discussion of cjpeg for more details about these switches. +If you specify none of these switches, you get a plain baseline-JPEG output +file. The quality setting and so forth are determined by the input file. + +The image can be losslessly transformed by giving one of these switches: + -flip horizontal Mirror image horizontally (left-right). + -flip vertical Mirror image vertically (top-bottom). + -rotate 90 Rotate image 90 degrees clockwise. + -rotate 180 Rotate image 180 degrees. + -rotate 270 Rotate image 270 degrees clockwise (or 90 ccw). + -transpose Transpose image (across UL-to-LR axis). + -transverse Transverse transpose (across UR-to-LL axis). + +The transpose transformation has no restrictions regarding image dimensions. +The other transformations operate rather oddly if the image dimensions are not +a multiple of the iMCU size (usually 8 or 16 pixels), because they can only +transform complete blocks of DCT coefficient data in the desired way. + +jpegtran's default behavior when transforming an odd-size image is designed +to preserve exact reversibility and mathematical consistency of the +transformation set. As stated, transpose is able to flip the entire image +area. Horizontal mirroring leaves any partial iMCU column at the right edge +untouched, but is able to flip all rows of the image. Similarly, vertical +mirroring leaves any partial iMCU row at the bottom edge untouched, but is +able to flip all columns. The other transforms can be built up as sequences +of transpose and flip operations; for consistency, their actions on edge +pixels are defined to be the same as the end result of the corresponding +transpose-and-flip sequence. + +For practical use, you may prefer to discard any untransformable edge pixels +rather than having a strange-looking strip along the right and/or bottom edges +of a transformed image. To do this, add the -trim switch: + -trim Drop non-transformable edge blocks. +Obviously, a transformation with -trim is not reversible, so strictly speaking +jpegtran with this switch is not lossless. Also, the expected mathematical +equivalences between the transformations no longer hold. For example, +"-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by +"-rot 180 -trim" trims both edges. + +If you are only interested in perfect transformation, add the -perfect switch: + -perfect Fails with an error if the transformation is not + perfect. +For example you may want to do + jpegtran -rot 90 -perfect foo.jpg || djpeg foo.jpg | pnmflip -r90 | cjpeg +to do a perfect rotation if available or an approximated one if not. + +We also offer a lossless-crop option, which discards data outside a given +image region but losslessly preserves what is inside. Like the rotate and +flip transforms, lossless crop is restricted by the current JPEG format: the +upper left corner of the selected region must fall on an iMCU boundary. If +this does not hold for the given crop parameters, we silently move the upper +left corner up and/or left to make it so, simultaneously increasing the region +dimensions to keep the lower right crop corner unchanged. (Thus, the output +image covers at least the requested region, but may cover more.) + +The image can be losslessly cropped by giving the switch: + -crop WxH+X+Y Crop to a rectangular subarea of width W, height H + starting at point X,Y. + +Other not-strictly-lossless transformation switches are: + + -grayscale Force grayscale output. +This option discards the chrominance channels if the input image is YCbCr +(ie, a standard color JPEG), resulting in a grayscale JPEG file. The +luminance channel is preserved exactly, so this is a better method of reducing +to grayscale than decompression, conversion, and recompression. This switch +is particularly handy for fixing a monochrome picture that was mistakenly +encoded as a color JPEG. (In such a case, the space savings from getting rid +of the near-empty chroma channels won't be large; but the decoding time for +a grayscale JPEG is substantially less than that for a color JPEG.) + + -scale M/N Scale the output image by a factor M/N. +Currently supported scale factors are M/N with all M from 1 to 16, where N is +the source DCT size, which is 8 for baseline JPEG. If the /N part is omitted, +then M specifies the DCT scaled size to be applied on the given input. For +baseline JPEG this is equivalent to M/8 scaling, since the source DCT size +for baseline JPEG is 8. CAUTION: An implementation of the JPEG SmartScale +extension is required for this feature. SmartScale enabled JPEG is not yet +widely implemented, so many decoders will be unable to view a SmartScale +extended JPEG file at all. + +jpegtran also recognizes these switches that control what to do with "extra" +markers, such as comment blocks: + -copy none Copy no extra markers from source file. This setting + suppresses all comments and other excess baggage + present in the source file. + -copy comments Copy only comment markers. This setting copies + comments from the source file, but discards + any other inessential (for image display) data. + -copy all Copy all extra markers. This setting preserves + miscellaneous markers found in the source file, such + as JFIF thumbnails, Exif data, and Photoshop settings. + In some files these extra markers can be sizable. +The default behavior is -copy comments. (Note: in IJG releases v6 and v6a, +jpegtran always did the equivalent of -copy none.) + +Additional switches recognized by jpegtran are: + -outfile filename + -maxmemory N + -verbose + -debug +These work the same as in cjpeg or djpeg. + + +THE COMMENT UTILITIES + +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. + +We provide two utility programs to display COM block contents and add COM +blocks to a JPEG file. + +rdjpgcom searches a JPEG file and prints the contents of any COM blocks on +standard output. The command line syntax is + rdjpgcom [-raw] [-verbose] [inputfilename] +The switch "-raw" (or just "-r") causes rdjpgcom to also output non-printable +characters in comments, which are normally escaped for security reasons. +The switch "-verbose" (or just "-v") causes rdjpgcom to also display the JPEG +image dimensions. If you omit the input file name from the command line, +the JPEG file is read from standard input. (This may not work on some +operating systems, if binary data can't be read from stdin.) + +wrjpgcom adds a COM block, containing text you provide, to a JPEG file. +Ordinarily, the COM block is added after any existing COM blocks, but you +can delete the old COM blocks if you wish. wrjpgcom produces a new JPEG +file; it does not modify the input file. DO NOT try to overwrite the input +file by directing wrjpgcom's output back into it; on most systems this will +just destroy your file. + +The command line syntax for wrjpgcom is similar to cjpeg's. On Unix-like +systems, it is + wrjpgcom [switches] [inputfilename] +The output file is written to standard output. The input file comes from +the named file, or from standard input if no input file is named. + +On most non-Unix systems, the syntax is + wrjpgcom [switches] inputfilename outputfilename +where both input and output file names must be given explicitly. + +wrjpgcom understands three switches: + -replace Delete any existing COM blocks from the file. + -comment "Comment text" Supply new COM text on command line. + -cfile name Read text for new COM block from named file. +(Switch names can be abbreviated.) If you have only one line of comment text +to add, you can provide it on the command line with -comment. The comment +text must be surrounded with quotes so that it is treated as a single +argument. Longer comments can be read from a text file. + +If you give neither -comment nor -cfile, then wrjpgcom will read the comment +text from standard input. (In this case an input image file name MUST be +supplied, so that the source JPEG file comes from somewhere else.) You can +enter multiple lines, up to 64KB worth. Type an end-of-file indicator +(usually control-D or control-Z) to terminate the comment text entry. + +wrjpgcom will not add a COM block if the provided comment string is empty. +Therefore -replace -comment "" can be used to delete all COM blocks from a +file. + +These utility programs do not depend on the IJG JPEG library. In +particular, the source code for rdjpgcom is intended as an illustration of +the minimum amount of code required to parse a JPEG file header correctly. diff --git a/src/SDL2/external/jpeg-9/wizard.txt b/src/SDL2/external/jpeg-9/wizard.txt new file mode 100644 index 000000000..54170b227 --- /dev/null +++ b/src/SDL2/external/jpeg-9/wizard.txt @@ -0,0 +1,211 @@ +Advanced usage instructions for the Independent JPEG Group's JPEG software +========================================================================== + +This file describes cjpeg's "switches for wizards". + +The "wizard" switches are intended for experimentation with JPEG by persons +who are reasonably knowledgeable about the JPEG standard. If you don't know +what you are doing, DON'T USE THESE SWITCHES. You'll likely produce files +with worse image quality and/or poorer compression than you'd get from the +default settings. Furthermore, these switches must be used with caution +when making files intended for general use, because not all JPEG decoders +will support unusual JPEG parameter settings. + + +Quantization Table Adjustment +----------------------------- + +Ordinarily, cjpeg starts with a default set of tables (the same ones given +as examples in the JPEG standard) and scales them up or down according to +the -quality setting. The details of the scaling algorithm can be found in +jcparam.c. At very low quality settings, some quantization table entries +can get scaled up to values exceeding 255. Although 2-byte quantization +values are supported by the IJG software, this feature is not in baseline +JPEG and is not supported by all implementations. If you need to ensure +wide compatibility of low-quality files, you can constrain the scaled +quantization values to no more than 255 by giving the -baseline switch. +Note that use of -baseline will result in poorer quality for the same file +size, since more bits than necessary are expended on higher AC coefficients. + +You can substitute a different set of quantization values by using the +-qtables switch: + + -qtables file Use the quantization tables given in the named file. + +The specified file should be a text file containing decimal quantization +values. The file should contain one to four tables, each of 64 elements. +The tables are implicitly numbered 0,1,etc. in order of appearance. Table +entries appear in normal array order (NOT in the zigzag order in which they +will be stored in the JPEG file). + +Quantization table files are free format, in that arbitrary whitespace can +appear between numbers. Also, comments can be included: a comment starts +with '#' and extends to the end of the line. Here is an example file that +duplicates the default quantization tables: + + # Quantization tables given in JPEG spec, section K.1 + + # This is table 0 (the luminance table): + 16 11 10 16 24 40 51 61 + 12 12 14 19 26 58 60 55 + 14 13 16 24 40 57 69 56 + 14 17 22 29 51 87 80 62 + 18 22 37 56 68 109 103 77 + 24 35 55 64 81 104 113 92 + 49 64 78 87 103 121 120 101 + 72 92 95 98 112 100 103 99 + + # This is table 1 (the chrominance table): + 17 18 24 47 99 99 99 99 + 18 21 26 66 99 99 99 99 + 24 26 56 99 99 99 99 99 + 47 66 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + +If the -qtables switch is used without -quality, then the specified tables +are used exactly as-is. If both -qtables and -quality are used, then the +tables taken from the file are scaled in the same fashion that the default +tables would be scaled for that quality setting. If -baseline appears, then +the quantization values are constrained to the range 1-255. + +By default, cjpeg will use quantization table 0 for luminance components and +table 1 for chrominance components. To override this choice, use the -qslots +switch: + + -qslots N[,...] Select which quantization table to use for + each color component. + +The -qslots switch specifies a quantization table number for each color +component, in the order in which the components appear in the JPEG SOF marker. +For example, to create a separate table for each of Y,Cb,Cr, you could +provide a -qtables file that defines three quantization tables and say +"-qslots 0,1,2". If -qslots gives fewer table numbers than there are color +components, then the last table number is repeated as necessary. + + +Sampling Factor Adjustment +-------------------------- + +By default, cjpeg uses 2:1 horizontal and vertical downsampling when +compressing YCbCr data, and no downsampling for all other color spaces. +You can override this default with the -sample switch: + + -sample HxV[,...] Set JPEG sampling factors for each color + component. + +The -sample switch specifies the JPEG sampling factors for each color +component, in the order in which they appear in the JPEG SOF marker. +If you specify fewer HxV pairs than there are components, the remaining +components are set to 1x1 sampling. For example, the default YCbCr setting +is equivalent to "-sample 2x2,1x1,1x1", which can be abbreviated to +"-sample 2x2". + +There are still some JPEG decoders in existence that support only 2x1 +sampling (also called 4:2:2 sampling). Compatibility with such decoders can +be achieved by specifying "-sample 2x1". This is not recommended unless +really necessary, since it increases file size and encoding/decoding time +with very little quality gain. + + +Multiple Scan / Progression Control +----------------------------------- + +By default, cjpeg emits a single-scan sequential JPEG file. The +-progressive switch generates a progressive JPEG file using a default series +of progression parameters. You can create multiple-scan sequential JPEG +files or progressive JPEG files with custom progression parameters by using +the -scans switch: + + -scans file Use the scan sequence given in the named file. + +The specified file should be a text file containing a "scan script". +The script specifies the contents and ordering of the scans to be emitted. +Each entry in the script defines one scan. A scan definition specifies +the components to be included in the scan, and for progressive JPEG it also +specifies the progression parameters Ss,Se,Ah,Al for the scan. Scan +definitions are separated by semicolons (';'). A semicolon after the last +scan definition is optional. + +Each scan definition contains one to four component indexes, optionally +followed by a colon (':') and the four progressive-JPEG parameters. The +component indexes denote which color component(s) are to be transmitted in +the scan. Components are numbered in the order in which they appear in the +JPEG SOF marker, with the first component being numbered 0. (Note that these +indexes are not the "component ID" codes assigned to the components, just +positional indexes.) + +The progression parameters for each scan are: + Ss Zigzag index of first coefficient included in scan + Se Zigzag index of last coefficient included in scan + Ah Zero for first scan of a coefficient, else Al of prior scan + Al Successive approximation low bit position for scan +If the progression parameters are omitted, the values 0,63,0,0 are used, +producing a sequential JPEG file. cjpeg automatically determines whether +the script represents a progressive or sequential file, by observing whether +Ss and Se values other than 0 and 63 appear. (The -progressive switch is +not needed to specify this; in fact, it is ignored when -scans appears.) +The scan script must meet the JPEG restrictions on progression sequences. +(cjpeg checks that the spec's requirements are obeyed.) + +Scan script files are free format, in that arbitrary whitespace can appear +between numbers and around punctuation. Also, comments can be included: a +comment starts with '#' and extends to the end of the line. For additional +legibility, commas or dashes can be placed between values. (Actually, any +single punctuation character other than ':' or ';' can be inserted.) For +example, the following two scan definitions are equivalent: + 0 1 2: 0 63 0 0; + 0,1,2 : 0-63, 0,0 ; + +Here is an example of a scan script that generates a partially interleaved +sequential JPEG file: + + 0; # Y only in first scan + 1 2; # Cb and Cr in second scan + +Here is an example of a progressive scan script using only spectral selection +(no successive approximation): + + # Interleaved DC scan for Y,Cb,Cr: + 0,1,2: 0-0, 0, 0 ; + # AC scans: + 0: 1-2, 0, 0 ; # First two Y AC coefficients + 0: 3-5, 0, 0 ; # Three more + 1: 1-63, 0, 0 ; # All AC coefficients for Cb + 2: 1-63, 0, 0 ; # All AC coefficients for Cr + 0: 6-9, 0, 0 ; # More Y coefficients + 0: 10-63, 0, 0 ; # Remaining Y coefficients + +Here is an example of a successive-approximation script. This is equivalent +to the default script used by "cjpeg -progressive" for YCbCr images: + + # Initial DC scan for Y,Cb,Cr (lowest bit not sent) + 0,1,2: 0-0, 0, 1 ; + # First AC scan: send first 5 Y AC coefficients, minus 2 lowest bits: + 0: 1-5, 0, 2 ; + # Send all Cr,Cb AC coefficients, minus lowest bit: + # (chroma data is usually too small to be worth subdividing further; + # but note we send Cr first since eye is least sensitive to Cb) + 2: 1-63, 0, 1 ; + 1: 1-63, 0, 1 ; + # Send remaining Y AC coefficients, minus 2 lowest bits: + 0: 6-63, 0, 2 ; + # Send next-to-lowest bit of all Y AC coefficients: + 0: 1-63, 2, 1 ; + # At this point we've sent all but the lowest bit of all coefficients. + # Send lowest bit of DC coefficients + 0,1,2: 0-0, 1, 0 ; + # Send lowest bit of AC coefficients + 2: 1-63, 1, 0 ; + 1: 1-63, 1, 0 ; + # Y AC lowest bit scan is last; it's usually the largest scan + 0: 1-63, 1, 0 ; + +It may be worth pointing out that this script is tuned for quality settings +of around 50 to 75. For lower quality settings, you'd probably want to use +a script with fewer stages of successive approximation (otherwise the +initial scans will be really bad). For higher quality settings, you might +want to use more stages of successive approximation (so that the initial +scans are not too large). diff --git a/src/SDL2/external/jpeg-9/wrbmp.c b/src/SDL2/external/jpeg-9/wrbmp.c new file mode 100644 index 000000000..3283b0f15 --- /dev/null +++ b/src/SDL2/external/jpeg-9/wrbmp.c @@ -0,0 +1,442 @@ +/* + * wrbmp.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in Microsoft "BMP" + * format (MS Windows 3.x and OS/2 1.x flavors). + * Either 8-bit colormapped or 24-bit full-color format can be written. + * No compression is supported. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + * + * This code contributed by James Arthur Boucher. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef BMP_SUPPORTED + + +/* + * To support 12-bit JPEG data, we'd have to scale output down to 8 bits. + * This is not yet implemented. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + +/* + * Since BMP stores scanlines bottom-to-top, we have to invert the image + * from JPEG's top-to-bottom order. To do this, we save the outgoing data + * in a virtual array during put_pixel_row calls, then actually emit the + * BMP file during finish_output. The virtual array contains one JSAMPLE per + * pixel if the output is grayscale or colormapped, three if it is full color. + */ + +/* Private version of data destination object */ + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + boolean is_os2; /* saves the OS2 format request flag */ + + jvirt_sarray_ptr whole_image; /* needed to reverse row order */ + JDIMENSION data_width; /* JSAMPLEs per row */ + JDIMENSION row_width; /* physical width of one row in the BMP file */ + int pad_bytes; /* number of padding bytes needed per row */ + JDIMENSION cur_output_row; /* next row# to write to virtual array */ +} bmp_dest_struct; + +typedef bmp_dest_struct * bmp_dest_ptr; + + +/* Forward declarations */ +LOCAL(void) write_colormap + JPP((j_decompress_ptr cinfo, bmp_dest_ptr dest, + int map_colors, int map_entry_size)); + + +/* + * Write some pixel data. + * In this module rows_supplied will always be 1. + */ + +METHODDEF(void) +put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* This version is for writing 24-bit pixels */ +{ + bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; + JSAMPARRAY image_ptr; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + int pad; + + /* Access next row in virtual array */ + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->whole_image, + dest->cur_output_row, (JDIMENSION) 1, TRUE); + dest->cur_output_row++; + + /* Transfer data. Note destination values must be in BGR order + * (even though Microsoft's own documents say the opposite). + */ + inptr = dest->pub.buffer[0]; + outptr = image_ptr[0]; + for (col = cinfo->output_width; col > 0; col--) { + outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ + outptr[1] = *inptr++; + outptr[0] = *inptr++; + outptr += 3; + } + + /* Zero out the pad bytes. */ + pad = dest->pad_bytes; + while (--pad >= 0) + *outptr++ = 0; +} + +METHODDEF(void) +put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* This version is for grayscale OR quantized color output */ +{ + bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; + JSAMPARRAY image_ptr; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + int pad; + + /* Access next row in virtual array */ + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->whole_image, + dest->cur_output_row, (JDIMENSION) 1, TRUE); + dest->cur_output_row++; + + /* Transfer data. */ + inptr = dest->pub.buffer[0]; + outptr = image_ptr[0]; + for (col = cinfo->output_width; col > 0; col--) { + *outptr++ = *inptr++; /* can omit GETJSAMPLE() safely */ + } + + /* Zero out the pad bytes. */ + pad = dest->pad_bytes; + while (--pad >= 0) + *outptr++ = 0; +} + + +/* + * Startup: normally writes the file header. + * In this module we may as well postpone everything until finish_output. + */ + +METHODDEF(void) +start_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + /* no work here */ +} + + +/* + * Finish up at the end of the file. + * + * Here is where we really output the BMP file. + * + * First, routines to write the Windows and OS/2 variants of the file header. + */ + +LOCAL(void) +write_bmp_header (j_decompress_ptr cinfo, bmp_dest_ptr dest) +/* Write a Windows-style BMP file header, including colormap if needed */ +{ + char bmpfileheader[14]; + char bmpinfoheader[40]; +#define PUT_2B(array,offset,value) \ + (array[offset] = (char) ((value) & 0xFF), \ + array[offset+1] = (char) (((value) >> 8) & 0xFF)) +#define PUT_4B(array,offset,value) \ + (array[offset] = (char) ((value) & 0xFF), \ + array[offset+1] = (char) (((value) >> 8) & 0xFF), \ + array[offset+2] = (char) (((value) >> 16) & 0xFF), \ + array[offset+3] = (char) (((value) >> 24) & 0xFF)) + INT32 headersize, bfSize; + int bits_per_pixel, cmap_entries; + + /* Compute colormap size and total file size */ + if (cinfo->out_color_space == JCS_RGB) { + if (cinfo->quantize_colors) { + /* Colormapped RGB */ + bits_per_pixel = 8; + cmap_entries = 256; + } else { + /* Unquantized, full color RGB */ + bits_per_pixel = 24; + cmap_entries = 0; + } + } else { + /* Grayscale output. We need to fake a 256-entry colormap. */ + bits_per_pixel = 8; + cmap_entries = 256; + } + /* File size */ + headersize = 14 + 40 + cmap_entries * 4; /* Header and colormap */ + bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height; + + /* Set unused fields of header to 0 */ + MEMZERO(bmpfileheader, SIZEOF(bmpfileheader)); + MEMZERO(bmpinfoheader, SIZEOF(bmpinfoheader)); + + /* Fill the file header */ + bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */ + bmpfileheader[1] = 0x4D; + PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */ + /* we leave bfReserved1 & bfReserved2 = 0 */ + PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */ + + /* Fill the info header (Microsoft calls this a BITMAPINFOHEADER) */ + PUT_2B(bmpinfoheader, 0, 40); /* biSize */ + PUT_4B(bmpinfoheader, 4, cinfo->output_width); /* biWidth */ + PUT_4B(bmpinfoheader, 8, cinfo->output_height); /* biHeight */ + PUT_2B(bmpinfoheader, 12, 1); /* biPlanes - must be 1 */ + PUT_2B(bmpinfoheader, 14, bits_per_pixel); /* biBitCount */ + /* we leave biCompression = 0, for none */ + /* we leave biSizeImage = 0; this is correct for uncompressed data */ + if (cinfo->density_unit == 2) { /* if have density in dots/cm, then */ + PUT_4B(bmpinfoheader, 24, (INT32) (cinfo->X_density*100)); /* XPels/M */ + PUT_4B(bmpinfoheader, 28, (INT32) (cinfo->Y_density*100)); /* XPels/M */ + } + PUT_2B(bmpinfoheader, 32, cmap_entries); /* biClrUsed */ + /* we leave biClrImportant = 0 */ + + if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14) + ERREXIT(cinfo, JERR_FILE_WRITE); + if (JFWRITE(dest->pub.output_file, bmpinfoheader, 40) != (size_t) 40) + ERREXIT(cinfo, JERR_FILE_WRITE); + + if (cmap_entries > 0) + write_colormap(cinfo, dest, cmap_entries, 4); +} + + +LOCAL(void) +write_os2_header (j_decompress_ptr cinfo, bmp_dest_ptr dest) +/* Write an OS2-style BMP file header, including colormap if needed */ +{ + char bmpfileheader[14]; + char bmpcoreheader[12]; + INT32 headersize, bfSize; + int bits_per_pixel, cmap_entries; + + /* Compute colormap size and total file size */ + if (cinfo->out_color_space == JCS_RGB) { + if (cinfo->quantize_colors) { + /* Colormapped RGB */ + bits_per_pixel = 8; + cmap_entries = 256; + } else { + /* Unquantized, full color RGB */ + bits_per_pixel = 24; + cmap_entries = 0; + } + } else { + /* Grayscale output. We need to fake a 256-entry colormap. */ + bits_per_pixel = 8; + cmap_entries = 256; + } + /* File size */ + headersize = 14 + 12 + cmap_entries * 3; /* Header and colormap */ + bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height; + + /* Set unused fields of header to 0 */ + MEMZERO(bmpfileheader, SIZEOF(bmpfileheader)); + MEMZERO(bmpcoreheader, SIZEOF(bmpcoreheader)); + + /* Fill the file header */ + bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */ + bmpfileheader[1] = 0x4D; + PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */ + /* we leave bfReserved1 & bfReserved2 = 0 */ + PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */ + + /* Fill the info header (Microsoft calls this a BITMAPCOREHEADER) */ + PUT_2B(bmpcoreheader, 0, 12); /* bcSize */ + PUT_2B(bmpcoreheader, 4, cinfo->output_width); /* bcWidth */ + PUT_2B(bmpcoreheader, 6, cinfo->output_height); /* bcHeight */ + PUT_2B(bmpcoreheader, 8, 1); /* bcPlanes - must be 1 */ + PUT_2B(bmpcoreheader, 10, bits_per_pixel); /* bcBitCount */ + + if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14) + ERREXIT(cinfo, JERR_FILE_WRITE); + if (JFWRITE(dest->pub.output_file, bmpcoreheader, 12) != (size_t) 12) + ERREXIT(cinfo, JERR_FILE_WRITE); + + if (cmap_entries > 0) + write_colormap(cinfo, dest, cmap_entries, 3); +} + + +/* + * Write the colormap. + * Windows uses BGR0 map entries; OS/2 uses BGR entries. + */ + +LOCAL(void) +write_colormap (j_decompress_ptr cinfo, bmp_dest_ptr dest, + int map_colors, int map_entry_size) +{ + JSAMPARRAY colormap = cinfo->colormap; + int num_colors = cinfo->actual_number_of_colors; + FILE * outfile = dest->pub.output_file; + int i; + + if (colormap != NULL) { + if (cinfo->out_color_components == 3) { + /* Normal case with RGB colormap */ + for (i = 0; i < num_colors; i++) { + putc(GETJSAMPLE(colormap[2][i]), outfile); + putc(GETJSAMPLE(colormap[1][i]), outfile); + putc(GETJSAMPLE(colormap[0][i]), outfile); + if (map_entry_size == 4) + putc(0, outfile); + } + } else { + /* Grayscale colormap (only happens with grayscale quantization) */ + for (i = 0; i < num_colors; i++) { + putc(GETJSAMPLE(colormap[0][i]), outfile); + putc(GETJSAMPLE(colormap[0][i]), outfile); + putc(GETJSAMPLE(colormap[0][i]), outfile); + if (map_entry_size == 4) + putc(0, outfile); + } + } + } else { + /* If no colormap, must be grayscale data. Generate a linear "map". */ + for (i = 0; i < 256; i++) { + putc(i, outfile); + putc(i, outfile); + putc(i, outfile); + if (map_entry_size == 4) + putc(0, outfile); + } + } + /* Pad colormap with zeros to ensure specified number of colormap entries */ + if (i > map_colors) + ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, i); + for (; i < map_colors; i++) { + putc(0, outfile); + putc(0, outfile); + putc(0, outfile); + if (map_entry_size == 4) + putc(0, outfile); + } +} + + +METHODDEF(void) +finish_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; + register FILE * outfile = dest->pub.output_file; + JSAMPARRAY image_ptr; + register JSAMPROW data_ptr; + JDIMENSION row; + register JDIMENSION col; + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + + /* Write the header and colormap */ + if (dest->is_os2) + write_os2_header(cinfo, dest); + else + write_bmp_header(cinfo, dest); + + /* Write the file body from our virtual array */ + for (row = cinfo->output_height; row > 0; row--) { + if (progress != NULL) { + progress->pub.pass_counter = (long) (cinfo->output_height - row); + progress->pub.pass_limit = (long) cinfo->output_height; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->whole_image, row-1, (JDIMENSION) 1, FALSE); + data_ptr = image_ptr[0]; + for (col = dest->row_width; col > 0; col--) { + putc(GETJSAMPLE(*data_ptr), outfile); + data_ptr++; + } + } + if (progress != NULL) + progress->completed_extra_passes++; + + /* Make sure we wrote the output file OK */ + fflush(outfile); + if (ferror(outfile)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for BMP format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_bmp (j_decompress_ptr cinfo, boolean is_os2) +{ + bmp_dest_ptr dest; + JDIMENSION row_width; + + /* Create module interface object, fill in method pointers */ + dest = (bmp_dest_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(bmp_dest_struct)); + dest->pub.start_output = start_output_bmp; + dest->pub.finish_output = finish_output_bmp; + dest->is_os2 = is_os2; + + if (cinfo->out_color_space == JCS_GRAYSCALE) { + dest->pub.put_pixel_rows = put_gray_rows; + } else if (cinfo->out_color_space == JCS_RGB) { + if (cinfo->quantize_colors) + dest->pub.put_pixel_rows = put_gray_rows; + else + dest->pub.put_pixel_rows = put_pixel_rows; + } else { + ERREXIT(cinfo, JERR_BMP_COLORSPACE); + } + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Determine width of rows in the BMP file (padded to 4-byte boundary). */ + row_width = cinfo->output_width * cinfo->output_components; + dest->data_width = row_width; + while ((row_width & 3) != 0) row_width++; + dest->row_width = row_width; + dest->pad_bytes = (int) (row_width - dest->data_width); + + /* Allocate space for inversion array, prepare for write pass */ + dest->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + row_width, cinfo->output_height, (JDIMENSION) 1); + dest->cur_output_row = 0; + if (cinfo->progress != NULL) { + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + progress->total_extra_passes++; /* count file input as separate pass */ + } + + /* Create decompressor output buffer. */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, row_width, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + + return (djpeg_dest_ptr) dest; +} + +#endif /* BMP_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/wrgif.c b/src/SDL2/external/jpeg-9/wrgif.c new file mode 100644 index 000000000..5fe832839 --- /dev/null +++ b/src/SDL2/external/jpeg-9/wrgif.c @@ -0,0 +1,399 @@ +/* + * wrgif.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in GIF format. + * + ************************************************************************** + * NOTE: to avoid entanglements with Unisys' patent on LZW compression, * + * this code has been modified to output "uncompressed GIF" files. * + * There is no trace of the LZW algorithm in this file. * + ************************************************************************** + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + */ + +/* + * This code is loosely based on ppmtogif from the PBMPLUS distribution + * of Feb. 1991. That file contains the following copyright notice: + * Based on GIFENCODE by David Rowley . + * Lempel-Ziv compression based on "compress" by Spencer W. Thomas et al. + * Copyright (C) 1989 by Jef Poskanzer. + * Permission to use, copy, modify, and distribute this software and its + * documentation for any purpose and without fee is hereby granted, provided + * that the above copyright notice appear in all copies and that both that + * copyright notice and this permission notice appear in supporting + * documentation. This software is provided "as is" without express or + * implied warranty. + * + * We are also required to state that + * "The Graphics Interchange Format(c) is the Copyright property of + * CompuServe Incorporated. GIF(sm) is a Service Mark property of + * CompuServe Incorporated." + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef GIF_SUPPORTED + + +/* Private version of data destination object */ + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + j_decompress_ptr cinfo; /* back link saves passing separate parm */ + + /* State for packing variable-width codes into a bitstream */ + int n_bits; /* current number of bits/code */ + int maxcode; /* maximum code, given n_bits */ + INT32 cur_accum; /* holds bits not yet output */ + int cur_bits; /* # of bits in cur_accum */ + + /* State for GIF code assignment */ + int ClearCode; /* clear code (doesn't change) */ + int EOFCode; /* EOF code (ditto) */ + int code_counter; /* counts output symbols */ + + /* GIF data packet construction buffer */ + int bytesinpkt; /* # of bytes in current packet */ + char packetbuf[256]; /* workspace for accumulating packet */ + +} gif_dest_struct; + +typedef gif_dest_struct * gif_dest_ptr; + +/* Largest value that will fit in N bits */ +#define MAXCODE(n_bits) ((1 << (n_bits)) - 1) + + +/* + * Routines to package finished data bytes into GIF data blocks. + * A data block consists of a count byte (1..255) and that many data bytes. + */ + +LOCAL(void) +flush_packet (gif_dest_ptr dinfo) +/* flush any accumulated data */ +{ + if (dinfo->bytesinpkt > 0) { /* never write zero-length packet */ + dinfo->packetbuf[0] = (char) dinfo->bytesinpkt++; + if (JFWRITE(dinfo->pub.output_file, dinfo->packetbuf, dinfo->bytesinpkt) + != (size_t) dinfo->bytesinpkt) + ERREXIT(dinfo->cinfo, JERR_FILE_WRITE); + dinfo->bytesinpkt = 0; + } +} + + +/* Add a character to current packet; flush to disk if necessary */ +#define CHAR_OUT(dinfo,c) \ + { (dinfo)->packetbuf[++(dinfo)->bytesinpkt] = (char) (c); \ + if ((dinfo)->bytesinpkt >= 255) \ + flush_packet(dinfo); \ + } + + +/* Routine to convert variable-width codes into a byte stream */ + +LOCAL(void) +output (gif_dest_ptr dinfo, int code) +/* Emit a code of n_bits bits */ +/* Uses cur_accum and cur_bits to reblock into 8-bit bytes */ +{ + dinfo->cur_accum |= ((INT32) code) << dinfo->cur_bits; + dinfo->cur_bits += dinfo->n_bits; + + while (dinfo->cur_bits >= 8) { + CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF); + dinfo->cur_accum >>= 8; + dinfo->cur_bits -= 8; + } +} + + +/* The pseudo-compression algorithm. + * + * In this module we simply output each pixel value as a separate symbol; + * thus, no compression occurs. In fact, there is expansion of one bit per + * pixel, because we use a symbol width one bit wider than the pixel width. + * + * GIF ordinarily uses variable-width symbols, and the decoder will expect + * to ratchet up the symbol width after a fixed number of symbols. + * To simplify the logic and keep the expansion penalty down, we emit a + * GIF Clear code to reset the decoder just before the width would ratchet up. + * Thus, all the symbols in the output file will have the same bit width. + * Note that emitting the Clear codes at the right times is a mere matter of + * counting output symbols and is in no way dependent on the LZW patent. + * + * With a small basic pixel width (low color count), Clear codes will be + * needed very frequently, causing the file to expand even more. So this + * simplistic approach wouldn't work too well on bilevel images, for example. + * But for output of JPEG conversions the pixel width will usually be 8 bits + * (129 to 256 colors), so the overhead added by Clear symbols is only about + * one symbol in every 256. + */ + +LOCAL(void) +compress_init (gif_dest_ptr dinfo, int i_bits) +/* Initialize pseudo-compressor */ +{ + /* init all the state variables */ + dinfo->n_bits = i_bits; + dinfo->maxcode = MAXCODE(dinfo->n_bits); + dinfo->ClearCode = (1 << (i_bits - 1)); + dinfo->EOFCode = dinfo->ClearCode + 1; + dinfo->code_counter = dinfo->ClearCode + 2; + /* init output buffering vars */ + dinfo->bytesinpkt = 0; + dinfo->cur_accum = 0; + dinfo->cur_bits = 0; + /* GIF specifies an initial Clear code */ + output(dinfo, dinfo->ClearCode); +} + + +LOCAL(void) +compress_pixel (gif_dest_ptr dinfo, int c) +/* Accept and "compress" one pixel value. + * The given value must be less than n_bits wide. + */ +{ + /* Output the given pixel value as a symbol. */ + output(dinfo, c); + /* Issue Clear codes often enough to keep the reader from ratcheting up + * its symbol size. + */ + if (dinfo->code_counter < dinfo->maxcode) { + dinfo->code_counter++; + } else { + output(dinfo, dinfo->ClearCode); + dinfo->code_counter = dinfo->ClearCode + 2; /* reset the counter */ + } +} + + +LOCAL(void) +compress_term (gif_dest_ptr dinfo) +/* Clean up at end */ +{ + /* Send an EOF code */ + output(dinfo, dinfo->EOFCode); + /* Flush the bit-packing buffer */ + if (dinfo->cur_bits > 0) { + CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF); + } + /* Flush the packet buffer */ + flush_packet(dinfo); +} + + +/* GIF header construction */ + + +LOCAL(void) +put_word (gif_dest_ptr dinfo, unsigned int w) +/* Emit a 16-bit word, LSB first */ +{ + putc(w & 0xFF, dinfo->pub.output_file); + putc((w >> 8) & 0xFF, dinfo->pub.output_file); +} + + +LOCAL(void) +put_3bytes (gif_dest_ptr dinfo, int val) +/* Emit 3 copies of same byte value --- handy subr for colormap construction */ +{ + putc(val, dinfo->pub.output_file); + putc(val, dinfo->pub.output_file); + putc(val, dinfo->pub.output_file); +} + + +LOCAL(void) +emit_header (gif_dest_ptr dinfo, int num_colors, JSAMPARRAY colormap) +/* Output the GIF file header, including color map */ +/* If colormap==NULL, synthesize a gray-scale colormap */ +{ + int BitsPerPixel, ColorMapSize, InitCodeSize, FlagByte; + int cshift = dinfo->cinfo->data_precision - 8; + int i; + + if (num_colors > 256) + ERREXIT1(dinfo->cinfo, JERR_TOO_MANY_COLORS, num_colors); + /* Compute bits/pixel and related values */ + BitsPerPixel = 1; + while (num_colors > (1 << BitsPerPixel)) + BitsPerPixel++; + ColorMapSize = 1 << BitsPerPixel; + if (BitsPerPixel <= 1) + InitCodeSize = 2; + else + InitCodeSize = BitsPerPixel; + /* + * Write the GIF header. + * Note that we generate a plain GIF87 header for maximum compatibility. + */ + putc('G', dinfo->pub.output_file); + putc('I', dinfo->pub.output_file); + putc('F', dinfo->pub.output_file); + putc('8', dinfo->pub.output_file); + putc('7', dinfo->pub.output_file); + putc('a', dinfo->pub.output_file); + /* Write the Logical Screen Descriptor */ + put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); + put_word(dinfo, (unsigned int) dinfo->cinfo->output_height); + FlagByte = 0x80; /* Yes, there is a global color table */ + FlagByte |= (BitsPerPixel-1) << 4; /* color resolution */ + FlagByte |= (BitsPerPixel-1); /* size of global color table */ + putc(FlagByte, dinfo->pub.output_file); + putc(0, dinfo->pub.output_file); /* Background color index */ + putc(0, dinfo->pub.output_file); /* Reserved (aspect ratio in GIF89) */ + /* Write the Global Color Map */ + /* If the color map is more than 8 bits precision, */ + /* we reduce it to 8 bits by shifting */ + for (i=0; i < ColorMapSize; i++) { + if (i < num_colors) { + if (colormap != NULL) { + if (dinfo->cinfo->out_color_space == JCS_RGB) { + /* Normal case: RGB color map */ + putc(GETJSAMPLE(colormap[0][i]) >> cshift, dinfo->pub.output_file); + putc(GETJSAMPLE(colormap[1][i]) >> cshift, dinfo->pub.output_file); + putc(GETJSAMPLE(colormap[2][i]) >> cshift, dinfo->pub.output_file); + } else { + /* Grayscale "color map": possible if quantizing grayscale image */ + put_3bytes(dinfo, GETJSAMPLE(colormap[0][i]) >> cshift); + } + } else { + /* Create a gray-scale map of num_colors values, range 0..255 */ + put_3bytes(dinfo, (i * 255 + (num_colors-1)/2) / (num_colors-1)); + } + } else { + /* fill out the map to a power of 2 */ + put_3bytes(dinfo, 0); + } + } + /* Write image separator and Image Descriptor */ + putc(',', dinfo->pub.output_file); /* separator */ + put_word(dinfo, 0); /* left/top offset */ + put_word(dinfo, 0); + put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); /* image size */ + put_word(dinfo, (unsigned int) dinfo->cinfo->output_height); + /* flag byte: not interlaced, no local color map */ + putc(0x00, dinfo->pub.output_file); + /* Write Initial Code Size byte */ + putc(InitCodeSize, dinfo->pub.output_file); + + /* Initialize for "compression" of image data */ + compress_init(dinfo, InitCodeSize+1); +} + + +/* + * Startup: write the file header. + */ + +METHODDEF(void) +start_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + gif_dest_ptr dest = (gif_dest_ptr) dinfo; + + if (cinfo->quantize_colors) + emit_header(dest, cinfo->actual_number_of_colors, cinfo->colormap); + else + emit_header(dest, 256, (JSAMPARRAY) NULL); +} + + +/* + * Write some pixel data. + * In this module rows_supplied will always be 1. + */ + +METHODDEF(void) +put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + gif_dest_ptr dest = (gif_dest_ptr) dinfo; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = dest->pub.buffer[0]; + for (col = cinfo->output_width; col > 0; col--) { + compress_pixel(dest, GETJSAMPLE(*ptr++)); + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + gif_dest_ptr dest = (gif_dest_ptr) dinfo; + + /* Flush "compression" mechanism */ + compress_term(dest); + /* Write a zero-length data block to end the series */ + putc(0, dest->pub.output_file); + /* Write the GIF terminator mark */ + putc(';', dest->pub.output_file); + /* Make sure we wrote the output file OK */ + fflush(dest->pub.output_file); + if (ferror(dest->pub.output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for GIF format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_gif (j_decompress_ptr cinfo) +{ + gif_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (gif_dest_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(gif_dest_struct)); + dest->cinfo = cinfo; /* make back link for subroutines */ + dest->pub.start_output = start_output_gif; + dest->pub.put_pixel_rows = put_pixel_rows; + dest->pub.finish_output = finish_output_gif; + + if (cinfo->out_color_space != JCS_GRAYSCALE && + cinfo->out_color_space != JCS_RGB) + ERREXIT(cinfo, JERR_GIF_COLORSPACE); + + /* Force quantization if color or if > 8 bits input */ + if (cinfo->out_color_space != JCS_GRAYSCALE || cinfo->data_precision > 8) { + /* Force quantization to at most 256 colors */ + cinfo->quantize_colors = TRUE; + if (cinfo->desired_number_of_colors > 256) + cinfo->desired_number_of_colors = 256; + } + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + if (cinfo->output_components != 1) /* safety check: just one component? */ + ERREXIT(cinfo, JERR_GIF_BUG); + + /* Create decompressor output buffer. */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->output_width, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + + return (djpeg_dest_ptr) dest; +} + +#endif /* GIF_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/wrjpgcom.1 b/src/SDL2/external/jpeg-9/wrjpgcom.1 new file mode 100644 index 000000000..d419a9999 --- /dev/null +++ b/src/SDL2/external/jpeg-9/wrjpgcom.1 @@ -0,0 +1,103 @@ +.TH WRJPGCOM 1 "15 June 1995" +.SH NAME +wrjpgcom \- insert text comments into a JPEG file +.SH SYNOPSIS +.B wrjpgcom +[ +.B \-replace +] +[ +.BI \-comment " text" +] +[ +.BI \-cfile " name" +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B wrjpgcom +reads the named JPEG/JFIF file, or the standard input if no file is named, +and generates a new JPEG/JFIF file on standard output. A comment block is +added to the file. +.PP +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. +.PP +.B wrjpgcom +adds a COM block, containing text you provide, to a JPEG file. +Ordinarily, the COM block is added after any existing COM blocks; but you +can delete the old COM blocks if you wish. +.SH OPTIONS +Switch names may be abbreviated, and are not case sensitive. +.TP +.B \-replace +Delete any existing COM blocks from the file. +.TP +.BI \-comment " text" +Supply text for new COM block on command line. +.TP +.BI \-cfile " name" +Read text for new COM block from named file. +.PP +If you have only one line of comment text to add, you can provide it on the +command line with +.BR \-comment . +The comment text must be surrounded with quotes so that it is treated as a +single argument. Longer comments can be read from a text file. +.PP +If you give neither +.B \-comment +nor +.BR \-cfile , +then +.B wrjpgcom +will read the comment text from standard input. (In this case an input image +file name MUST be supplied, so that the source JPEG file comes from somewhere +else.) You can enter multiple lines, up to 64KB worth. Type an end-of-file +indicator (usually control-D) to terminate the comment text entry. +.PP +.B wrjpgcom +will not add a COM block if the provided comment string is empty. Therefore +\fB\-replace \-comment ""\fR can be used to delete all COM blocks from a file. +.SH EXAMPLES +.LP +Add a short comment to in.jpg, producing out.jpg: +.IP +.B wrjpgcom \-c +\fI"View of my back yard" in.jpg +.B > +.I out.jpg +.PP +Attach a long comment previously stored in comment.txt: +.IP +.B wrjpgcom +.I in.jpg +.B < +.I comment.txt +.B > +.I out.jpg +.PP +or equivalently +.IP +.B wrjpgcom +.B -cfile +.I comment.txt +.B < +.I in.jpg +.B > +.I out.jpg +.SH SEE ALSO +.BR cjpeg (1), +.BR djpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1) +.SH AUTHOR +Independent JPEG Group diff --git a/src/SDL2/external/jpeg-9/wrjpgcom.c b/src/SDL2/external/jpeg-9/wrjpgcom.c new file mode 100644 index 000000000..8c04b0551 --- /dev/null +++ b/src/SDL2/external/jpeg-9/wrjpgcom.c @@ -0,0 +1,583 @@ +/* + * wrjpgcom.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a very simple stand-alone application that inserts + * user-supplied text as a COM (comment) marker in a JFIF file. + * This may be useful as an example of the minimum logic needed to parse + * JPEG markers. + */ + +#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ +#include "jinclude.h" /* get auto-config symbols, */ + +#ifndef HAVE_STDLIB_H /* should declare malloc() */ +extern void * malloc (); +#endif +#include /* to declare isupper(), tolower() */ +#ifdef USE_SETMODE +#include /* to declare setmode()'s parameter macros */ +/* If you have setmode() but not , just delete this line: */ +#include /* to declare setmode() */ +#endif + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define WRITE_BINARY "w" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define WRITE_BINARY "wb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define WRITE_BINARY "wb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif + +/* Reduce this value if your malloc() can't allocate blocks up to 64K. + * On DOS, compiling in large model is usually a better solution. + */ + +#ifndef MAX_COM_LENGTH +#define MAX_COM_LENGTH 65000L /* must be <= 65533 in any case */ +#endif + + +/* + * These macros are used to read the input file and write the output file. + * To reuse this code in another application, you might need to change these. + */ + +static FILE * infile; /* input JPEG file */ + +/* Return next input byte, or EOF if no more */ +#define NEXTBYTE() getc(infile) + +static FILE * outfile; /* output JPEG file */ + +/* Emit an output byte */ +#define PUTBYTE(x) putc((x), outfile) + + +/* Error exit handler */ +#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE)) + + +/* Read one byte, testing for EOF */ +static int +read_1_byte (void) +{ + int c; + + c = NEXTBYTE(); + if (c == EOF) + ERREXIT("Premature EOF in JPEG file"); + return c; +} + +/* Read 2 bytes, convert to unsigned int */ +/* All 2-byte quantities in JPEG markers are MSB first */ +static unsigned int +read_2_bytes (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + if (c1 == EOF) + ERREXIT("Premature EOF in JPEG file"); + c2 = NEXTBYTE(); + if (c2 == EOF) + ERREXIT("Premature EOF in JPEG file"); + return (((unsigned int) c1) << 8) + ((unsigned int) c2); +} + + +/* Routines to write data to output file */ + +static void +write_1_byte (int c) +{ + PUTBYTE(c); +} + +static void +write_2_bytes (unsigned int val) +{ + PUTBYTE((val >> 8) & 0xFF); + PUTBYTE(val & 0xFF); +} + +static void +write_marker (int marker) +{ + PUTBYTE(0xFF); + PUTBYTE(marker); +} + +static void +copy_rest_of_file (void) +{ + int c; + + while ((c = NEXTBYTE()) != EOF) + PUTBYTE(c); +} + + +/* + * JPEG markers consist of one or more 0xFF bytes, followed by a marker + * code byte (which is not an FF). Here are the marker codes of interest + * in this program. (See jdmarker.c for a more complete list.) + */ + +#define M_SOF0 0xC0 /* Start Of Frame N */ +#define M_SOF1 0xC1 /* N indicates which compression process */ +#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */ +#define M_SOF3 0xC3 +#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */ +#define M_SOF6 0xC6 +#define M_SOF7 0xC7 +#define M_SOF9 0xC9 +#define M_SOF10 0xCA +#define M_SOF11 0xCB +#define M_SOF13 0xCD +#define M_SOF14 0xCE +#define M_SOF15 0xCF +#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */ +#define M_EOI 0xD9 /* End Of Image (end of datastream) */ +#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */ +#define M_COM 0xFE /* COMment */ + + +/* + * Find the next JPEG marker and return its marker code. + * We expect at least one FF byte, possibly more if the compressor used FFs + * to pad the file. (Padding FFs will NOT be replicated in the output file.) + * There could also be non-FF garbage between markers. The treatment of such + * garbage is unspecified; we choose to skip over it but emit a warning msg. + * NB: this routine must not be used after seeing SOS marker, since it will + * not deal correctly with FF/00 sequences in the compressed image data... + */ + +static int +next_marker (void) +{ + int c; + int discarded_bytes = 0; + + /* Find 0xFF byte; count and skip any non-FFs. */ + c = read_1_byte(); + while (c != 0xFF) { + discarded_bytes++; + c = read_1_byte(); + } + /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs + * are legal as pad bytes, so don't count them in discarded_bytes. + */ + do { + c = read_1_byte(); + } while (c == 0xFF); + + if (discarded_bytes != 0) { + fprintf(stderr, "Warning: garbage data found in JPEG file\n"); + } + + return c; +} + + +/* + * Read the initial marker, which should be SOI. + * For a JFIF file, the first two bytes of the file should be literally + * 0xFF M_SOI. To be more general, we could use next_marker, but if the + * input file weren't actually JPEG at all, next_marker might read the whole + * file and then return a misleading error message... + */ + +static int +first_marker (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + c2 = NEXTBYTE(); + if (c1 != 0xFF || c2 != M_SOI) + ERREXIT("Not a JPEG file"); + return c2; +} + + +/* + * Most types of marker are followed by a variable-length parameter segment. + * This routine skips over the parameters for any marker we don't otherwise + * want to process. + * Note that we MUST skip the parameter segment explicitly in order not to + * be fooled by 0xFF bytes that might appear within the parameter segment; + * such bytes do NOT introduce new markers. + */ + +static void +copy_variable (void) +/* Copy an unknown or uninteresting variable-length marker */ +{ + unsigned int length; + + /* Get the marker parameter length count */ + length = read_2_bytes(); + write_2_bytes(length); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + /* Skip over the remaining bytes */ + while (length > 0) { + write_1_byte(read_1_byte()); + length--; + } +} + +static void +skip_variable (void) +/* Skip over an unknown or uninteresting variable-length marker */ +{ + unsigned int length; + + /* Get the marker parameter length count */ + length = read_2_bytes(); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + /* Skip over the remaining bytes */ + while (length > 0) { + (void) read_1_byte(); + length--; + } +} + + +/* + * Parse the marker stream until SOFn or EOI is seen; + * copy data to output, but discard COM markers unless keep_COM is true. + */ + +static int +scan_JPEG_header (int keep_COM) +{ + int marker; + + /* Expect SOI at start of file */ + if (first_marker() != M_SOI) + ERREXIT("Expected SOI marker first"); + write_marker(M_SOI); + + /* Scan miscellaneous markers until we reach SOFn. */ + for (;;) { + marker = next_marker(); + switch (marker) { + /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be, + * treated as SOFn. C4 in particular is actually DHT. + */ + case M_SOF0: /* Baseline */ + case M_SOF1: /* Extended sequential, Huffman */ + case M_SOF2: /* Progressive, Huffman */ + case M_SOF3: /* Lossless, Huffman */ + case M_SOF5: /* Differential sequential, Huffman */ + case M_SOF6: /* Differential progressive, Huffman */ + case M_SOF7: /* Differential lossless, Huffman */ + case M_SOF9: /* Extended sequential, arithmetic */ + case M_SOF10: /* Progressive, arithmetic */ + case M_SOF11: /* Lossless, arithmetic */ + case M_SOF13: /* Differential sequential, arithmetic */ + case M_SOF14: /* Differential progressive, arithmetic */ + case M_SOF15: /* Differential lossless, arithmetic */ + return marker; + + case M_SOS: /* should not see compressed data before SOF */ + ERREXIT("SOS without prior SOFn"); + break; + + case M_EOI: /* in case it's a tables-only JPEG stream */ + return marker; + + case M_COM: /* Existing COM: conditionally discard */ + if (keep_COM) { + write_marker(marker); + copy_variable(); + } else { + skip_variable(); + } + break; + + default: /* Anything else just gets copied */ + write_marker(marker); + copy_variable(); /* we assume it has a parameter count... */ + break; + } + } /* end loop */ +} + + +/* Command line parsing code */ + +static const char * progname; /* program name for error messages */ + + +static void +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "wrjpgcom inserts a textual comment in a JPEG file.\n"); + fprintf(stderr, "You can add to or replace any existing comment(s).\n"); + + fprintf(stderr, "Usage: %s [switches] ", progname); +#ifdef TWO_FILE_COMMANDLINE + fprintf(stderr, "inputfile outputfile\n"); +#else + fprintf(stderr, "[inputfile]\n"); +#endif + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -replace Delete any existing comments\n"); + fprintf(stderr, " -comment \"text\" Insert comment with given text\n"); + fprintf(stderr, " -cfile name Read comment from named file\n"); + fprintf(stderr, "Notice that you must put quotes around the comment text\n"); + fprintf(stderr, "when you use -comment.\n"); + fprintf(stderr, "If you do not give either -comment or -cfile on the command line,\n"); + fprintf(stderr, "then the comment text is read from standard input.\n"); + fprintf(stderr, "It can be multiple lines, up to %u characters total.\n", + (unsigned int) MAX_COM_LENGTH); +#ifndef TWO_FILE_COMMANDLINE + fprintf(stderr, "You must specify an input JPEG file name when supplying\n"); + fprintf(stderr, "comment text from standard input.\n"); +#endif + + exit(EXIT_FAILURE); +} + + +static int +keymatch (char * arg, const char * keyword, int minchars) +/* Case-insensitive matching of (possibly abbreviated) keyword switches. */ +/* keyword is the constant keyword (must be lower case already), */ +/* minchars is length of minimum legal abbreviation. */ +{ + register int ca, ck; + register int nmatched = 0; + + while ((ca = *arg++) != '\0') { + if ((ck = *keyword++) == '\0') + return 0; /* arg longer than keyword, no good */ + if (isupper(ca)) /* force arg to lcase (assume ck is already) */ + ca = tolower(ca); + if (ca != ck) + return 0; /* no good */ + nmatched++; /* count matched characters */ + } + /* reached end of argument; fail if it's too short for unique abbrev */ + if (nmatched < minchars) + return 0; + return 1; /* A-OK */ +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + int argn; + char * arg; + int keep_COM = 1; + char * comment_arg = NULL; + FILE * comment_file = NULL; + unsigned int comment_length = 0; + int marker; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "wrjpgcom"; /* in case C library doesn't provide it */ + + /* Parse switches, if any */ + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (arg[0] != '-') + break; /* not switch, must be file name */ + arg++; /* advance over '-' */ + if (keymatch(arg, "replace", 1)) { + keep_COM = 0; + } else if (keymatch(arg, "cfile", 2)) { + if (++argn >= argc) usage(); + if ((comment_file = fopen(argv[argn], "r")) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + } else if (keymatch(arg, "comment", 1)) { + if (++argn >= argc) usage(); + comment_arg = argv[argn]; + /* If the comment text starts with '"', then we are probably running + * under MS-DOG and must parse out the quoted string ourselves. Sigh. + */ + if (comment_arg[0] == '"') { + comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); + if (comment_arg == NULL) + ERREXIT("Insufficient memory"); + strcpy(comment_arg, argv[argn]+1); + for (;;) { + comment_length = (unsigned int) strlen(comment_arg); + if (comment_length > 0 && comment_arg[comment_length-1] == '"') { + comment_arg[comment_length-1] = '\0'; /* zap terminating quote */ + break; + } + if (++argn >= argc) + ERREXIT("Missing ending quote mark"); + strcat(comment_arg, " "); + strcat(comment_arg, argv[argn]); + } + } + comment_length = (unsigned int) strlen(comment_arg); + } else + usage(); + } + + /* Cannot use both -comment and -cfile. */ + if (comment_arg != NULL && comment_file != NULL) + usage(); + /* If there is neither -comment nor -cfile, we will read the comment text + * from stdin; in this case there MUST be an input JPEG file name. + */ + if (comment_arg == NULL && comment_file == NULL && argn >= argc) + usage(); + + /* Open the input file. */ + if (argn < argc) { + if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdin), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open stdin\n", progname); + exit(EXIT_FAILURE); + } +#else + infile = stdin; +#endif + } + + /* Open the output file. */ +#ifdef TWO_FILE_COMMANDLINE + /* Must have explicit output file name */ + if (argn != argc-2) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + if ((outfile = fopen(argv[argn+1], WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn+1]); + exit(EXIT_FAILURE); + } +#else + /* Unix style: expect zero or one file name */ + if (argn < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } + /* default output file is stdout */ +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdout), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((outfile = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open stdout\n", progname); + exit(EXIT_FAILURE); + } +#else + outfile = stdout; +#endif +#endif /* TWO_FILE_COMMANDLINE */ + + /* Collect comment text from comment_file or stdin, if necessary */ + if (comment_arg == NULL) { + FILE * src_file; + int c; + + comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); + if (comment_arg == NULL) + ERREXIT("Insufficient memory"); + comment_length = 0; + src_file = (comment_file != NULL ? comment_file : stdin); + while ((c = getc(src_file)) != EOF) { + if (comment_length >= (unsigned int) MAX_COM_LENGTH) { + fprintf(stderr, "Comment text may not exceed %u bytes\n", + (unsigned int) MAX_COM_LENGTH); + exit(EXIT_FAILURE); + } + comment_arg[comment_length++] = (char) c; + } + if (comment_file != NULL) + fclose(comment_file); + } + + /* Copy JPEG headers until SOFn marker; + * we will insert the new comment marker just before SOFn. + * This (a) causes the new comment to appear after, rather than before, + * existing comments; and (b) ensures that comments come after any JFIF + * or JFXX markers, as required by the JFIF specification. + */ + marker = scan_JPEG_header(keep_COM); + /* Insert the new COM marker, but only if nonempty text has been supplied */ + if (comment_length > 0) { + write_marker(M_COM); + write_2_bytes(comment_length + 2); + while (comment_length > 0) { + write_1_byte(*comment_arg++); + comment_length--; + } + } + /* Duplicate the remainder of the source file. + * Note that any COM markers occuring after SOF will not be touched. + */ + write_marker(marker); + copy_rest_of_file(); + + /* All done. */ + exit(EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/src/SDL2/external/jpeg-9/wrppm.c b/src/SDL2/external/jpeg-9/wrppm.c new file mode 100644 index 000000000..68e0c85c3 --- /dev/null +++ b/src/SDL2/external/jpeg-9/wrppm.c @@ -0,0 +1,269 @@ +/* + * wrppm.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in PPM/PGM format. + * The extended 2-byte-per-sample raw PPM/PGM formats are supported. + * The PBMPLUS library is NOT required to compile this software + * (but it is highly useful as a set of PPM image manipulation programs). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef PPM_SUPPORTED + + +/* + * For 12-bit JPEG data, we either downscale the values to 8 bits + * (to write standard byte-per-sample PPM/PGM files), or output + * nonstandard word-per-sample PPM/PGM files. Downscaling is done + * if PPM_NORAWWORD is defined (this can be done in the Makefile + * or in jconfig.h). + * (When the core library supports data precision reduction, a cleaner + * implementation will be to ask for that instead.) + */ + +#if BITS_IN_JSAMPLE == 8 +#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) (v) +#define BYTESPERSAMPLE 1 +#define PPM_MAXVAL 255 +#else +#ifdef PPM_NORAWWORD +#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) ((v) >> (BITS_IN_JSAMPLE-8)) +#define BYTESPERSAMPLE 1 +#define PPM_MAXVAL 255 +#else +/* The word-per-sample format always puts the MSB first. */ +#define PUTPPMSAMPLE(ptr,v) \ + { register int val_ = v; \ + *ptr++ = (char) ((val_ >> 8) & 0xFF); \ + *ptr++ = (char) (val_ & 0xFF); \ + } +#define BYTESPERSAMPLE 2 +#define PPM_MAXVAL ((1<pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * This code is used when we have to copy the data and apply a pixel + * format translation. Typically this only happens in 12-bit mode. + */ + +METHODDEF(void) +copy_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; + register char * bufferptr; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = dest->pub.buffer[0]; + bufferptr = dest->iobuffer; + for (col = dest->samples_per_row; col > 0; col--) { + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(*ptr++)); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Write some pixel data when color quantization is in effect. + * We have to demap the color index values to straight data. + */ + +METHODDEF(void) +put_demapped_rgb (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; + register char * bufferptr; + register int pixval; + register JSAMPROW ptr; + register JSAMPROW color_map0 = cinfo->colormap[0]; + register JSAMPROW color_map1 = cinfo->colormap[1]; + register JSAMPROW color_map2 = cinfo->colormap[2]; + register JDIMENSION col; + + ptr = dest->pub.buffer[0]; + bufferptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + pixval = GETJSAMPLE(*ptr++); + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map0[pixval])); + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map1[pixval])); + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map2[pixval])); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +METHODDEF(void) +put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; + register char * bufferptr; + register JSAMPROW ptr; + register JSAMPROW color_map = cinfo->colormap[0]; + register JDIMENSION col; + + ptr = dest->pub.buffer[0]; + bufferptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map[GETJSAMPLE(*ptr++)])); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Startup: write the file header. + */ + +METHODDEF(void) +start_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; + + /* Emit file header */ + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + /* emit header for raw PGM format */ + fprintf(dest->pub.output_file, "P5\n%ld %ld\n%d\n", + (long) cinfo->output_width, (long) cinfo->output_height, + PPM_MAXVAL); + break; + case JCS_RGB: + /* emit header for raw PPM format */ + fprintf(dest->pub.output_file, "P6\n%ld %ld\n%d\n", + (long) cinfo->output_width, (long) cinfo->output_height, + PPM_MAXVAL); + break; + default: + ERREXIT(cinfo, JERR_PPM_COLORSPACE); + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + /* Make sure we wrote the output file OK */ + fflush(dinfo->output_file); + if (ferror(dinfo->output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for PPM format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_ppm (j_decompress_ptr cinfo) +{ + ppm_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (ppm_dest_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(ppm_dest_struct)); + dest->pub.start_output = start_output_ppm; + dest->pub.finish_output = finish_output_ppm; + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Create physical I/O buffer. Note we make this near on a PC. */ + dest->samples_per_row = cinfo->output_width * cinfo->out_color_components; + dest->buffer_width = dest->samples_per_row * (BYTESPERSAMPLE * SIZEOF(char)); + dest->iobuffer = (char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width); + + if (cinfo->quantize_colors || BITS_IN_JSAMPLE != 8 || + SIZEOF(JSAMPLE) != SIZEOF(char)) { + /* When quantizing, we need an output buffer for colormap indexes + * that's separate from the physical I/O buffer. We also need a + * separate buffer if pixel format translation must take place. + */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->output_width * cinfo->output_components, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + if (! cinfo->quantize_colors) + dest->pub.put_pixel_rows = copy_pixel_rows; + else if (cinfo->out_color_space == JCS_GRAYSCALE) + dest->pub.put_pixel_rows = put_demapped_gray; + else + dest->pub.put_pixel_rows = put_demapped_rgb; + } else { + /* We will fwrite() directly from decompressor output buffer. */ + /* Synthesize a JSAMPARRAY pointer structure */ + /* Cast here implies near->far pointer conversion on PCs */ + dest->pixrow = (JSAMPROW) dest->iobuffer; + dest->pub.buffer = & dest->pixrow; + dest->pub.buffer_height = 1; + dest->pub.put_pixel_rows = put_pixel_rows; + } + + return (djpeg_dest_ptr) dest; +} + +#endif /* PPM_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/wrrle.c b/src/SDL2/external/jpeg-9/wrrle.c new file mode 100644 index 000000000..a4e73372d --- /dev/null +++ b/src/SDL2/external/jpeg-9/wrrle.c @@ -0,0 +1,305 @@ +/* + * wrrle.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in RLE format. + * The Utah Raster Toolkit library is required (version 3.1 or later). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + * + * Based on code contributed by Mike Lijewski, + * with updates from Robert Hutchinson. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef RLE_SUPPORTED + +/* rle.h is provided by the Utah Raster Toolkit. */ + +#include + +/* + * We assume that JSAMPLE has the same representation as rle_pixel, + * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + + +/* + * Since RLE stores scanlines bottom-to-top, we have to invert the image + * from JPEG's top-to-bottom order. To do this, we save the outgoing data + * in a virtual array during put_pixel_row calls, then actually emit the + * RLE file during finish_output. + */ + + +/* + * For now, if we emit an RLE color map then it is always 256 entries long, + * though not all of the entries need be used. + */ + +#define CMAPBITS 8 +#define CMAPLENGTH (1<<(CMAPBITS)) + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + jvirt_sarray_ptr image; /* virtual array to store the output image */ + rle_map *colormap; /* RLE-style color map, or NULL if none */ + rle_pixel **rle_row; /* To pass rows to rle_putrow() */ + +} rle_dest_struct; + +typedef rle_dest_struct * rle_dest_ptr; + +/* Forward declarations */ +METHODDEF(void) rle_put_pixel_rows + JPP((j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied)); + + +/* + * Write the file header. + * + * In this module it's easier to wait till finish_output to write anything. + */ + +METHODDEF(void) +start_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + rle_dest_ptr dest = (rle_dest_ptr) dinfo; + size_t cmapsize; + int i, ci; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + /* + * Make sure the image can be stored in RLE format. + * + * - RLE stores image dimensions as *signed* 16 bit integers. JPEG + * uses unsigned, so we have to check the width. + * + * - Colorspace is expected to be grayscale or RGB. + * + * - The number of channels (components) is expected to be 1 (grayscale/ + * pseudocolor) or 3 (truecolor/directcolor). + * (could be 2 or 4 if using an alpha channel, but we aren't) + */ + + if (cinfo->output_width > 32767 || cinfo->output_height > 32767) + ERREXIT2(cinfo, JERR_RLE_DIMENSIONS, cinfo->output_width, + cinfo->output_height); + + if (cinfo->out_color_space != JCS_GRAYSCALE && + cinfo->out_color_space != JCS_RGB) + ERREXIT(cinfo, JERR_RLE_COLORSPACE); + + if (cinfo->output_components != 1 && cinfo->output_components != 3) + ERREXIT1(cinfo, JERR_RLE_TOOMANYCHANNELS, cinfo->num_components); + + /* Convert colormap, if any, to RLE format. */ + + dest->colormap = NULL; + + if (cinfo->quantize_colors) { + /* Allocate storage for RLE-style cmap, zero any extra entries */ + cmapsize = cinfo->out_color_components * CMAPLENGTH * SIZEOF(rle_map); + dest->colormap = (rle_map *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, cmapsize); + MEMZERO(dest->colormap, cmapsize); + + /* Save away data in RLE format --- note 8-bit left shift! */ + /* Shifting would need adjustment for JSAMPLEs wider than 8 bits. */ + for (ci = 0; ci < cinfo->out_color_components; ci++) { + for (i = 0; i < cinfo->actual_number_of_colors; i++) { + dest->colormap[ci * CMAPLENGTH + i] = + GETJSAMPLE(cinfo->colormap[ci][i]) << 8; + } + } + } + + /* Set the output buffer to the first row */ + dest->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, (JDIMENSION) 0, (JDIMENSION) 1, TRUE); + dest->pub.buffer_height = 1; + + dest->pub.put_pixel_rows = rle_put_pixel_rows; + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->total_extra_passes++; /* count file writing as separate pass */ + } +#endif +} + + +/* + * Write some pixel data. + * + * This routine just saves the data away in a virtual array. + */ + +METHODDEF(void) +rle_put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + rle_dest_ptr dest = (rle_dest_ptr) dinfo; + + if (cinfo->output_scanline < cinfo->output_height) { + dest->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, + cinfo->output_scanline, (JDIMENSION) 1, TRUE); + } +} + +/* + * Finish up at the end of the file. + * + * Here is where we really output the RLE file. + */ + +METHODDEF(void) +finish_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + rle_dest_ptr dest = (rle_dest_ptr) dinfo; + rle_hdr header; /* Output file information */ + rle_pixel **rle_row, *red, *green, *blue; + JSAMPROW output_row; + char cmapcomment[80]; + int row, col; + int ci; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + /* Initialize the header info */ + header = *rle_hdr_init(NULL); + header.rle_file = dest->pub.output_file; + header.xmin = 0; + header.xmax = cinfo->output_width - 1; + header.ymin = 0; + header.ymax = cinfo->output_height - 1; + header.alpha = 0; + header.ncolors = cinfo->output_components; + for (ci = 0; ci < cinfo->output_components; ci++) { + RLE_SET_BIT(header, ci); + } + if (cinfo->quantize_colors) { + header.ncmap = cinfo->out_color_components; + header.cmaplen = CMAPBITS; + header.cmap = dest->colormap; + /* Add a comment to the output image with the true colormap length. */ + sprintf(cmapcomment, "color_map_length=%d", cinfo->actual_number_of_colors); + rle_putcom(cmapcomment, &header); + } + + /* Emit the RLE header and color map (if any) */ + rle_put_setup(&header); + + /* Now output the RLE data from our virtual array. + * We assume here that (a) rle_pixel is represented the same as JSAMPLE, + * and (b) we are not on a machine where FAR pointers differ from regular. + */ + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_limit = cinfo->output_height; + progress->pub.pass_counter = 0; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + + if (cinfo->output_components == 1) { + for (row = cinfo->output_height-1; row >= 0; row--) { + rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, + (JDIMENSION) row, (JDIMENSION) 1, FALSE); + rle_putrow(rle_row, (int) cinfo->output_width, &header); +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + } else { + for (row = cinfo->output_height-1; row >= 0; row--) { + rle_row = (rle_pixel **) dest->rle_row; + output_row = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, + (JDIMENSION) row, (JDIMENSION) 1, FALSE); + red = rle_row[0]; + green = rle_row[1]; + blue = rle_row[2]; + for (col = cinfo->output_width; col > 0; col--) { + *red++ = GETJSAMPLE(*output_row++); + *green++ = GETJSAMPLE(*output_row++); + *blue++ = GETJSAMPLE(*output_row++); + } + rle_putrow(rle_row, (int) cinfo->output_width, &header); +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) + progress->completed_extra_passes++; +#endif + + /* Emit file trailer */ + rle_puteof(&header); + fflush(dest->pub.output_file); + if (ferror(dest->pub.output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for RLE format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_rle (j_decompress_ptr cinfo) +{ + rle_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (rle_dest_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(rle_dest_struct)); + dest->pub.start_output = start_output_rle; + dest->pub.finish_output = finish_output_rle; + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Allocate a work array for output to the RLE library. */ + dest->rle_row = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->output_width, (JDIMENSION) cinfo->output_components); + + /* Allocate a virtual array to hold the image. */ + dest->image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) (cinfo->output_width * cinfo->output_components), + cinfo->output_height, (JDIMENSION) 1); + + return (djpeg_dest_ptr) dest; +} + +#endif /* RLE_SUPPORTED */ diff --git a/src/SDL2/external/jpeg-9/wrtarga.c b/src/SDL2/external/jpeg-9/wrtarga.c new file mode 100644 index 000000000..cf104d2de --- /dev/null +++ b/src/SDL2/external/jpeg-9/wrtarga.c @@ -0,0 +1,253 @@ +/* + * wrtarga.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in Targa format. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + * + * Based on code contributed by Lee Daniel Crocker. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef TARGA_SUPPORTED + + +/* + * To support 12-bit JPEG data, we'd have to scale output down to 8 bits. + * This is not yet implemented. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + +/* + * The output buffer needs to be writable by fwrite(). On PCs, we must + * allocate the buffer in near data space, because we are assuming small-data + * memory model, wherein fwrite() can't reach far memory. If you need to + * process very wide images on a PC, you might have to compile in large-memory + * model, or else replace fwrite() with a putc() loop --- which will be much + * slower. + */ + + +/* Private version of data destination object */ + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + char *iobuffer; /* physical I/O buffer */ + JDIMENSION buffer_width; /* width of one row */ +} tga_dest_struct; + +typedef tga_dest_struct * tga_dest_ptr; + + +LOCAL(void) +write_header (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, int num_colors) +/* Create and write a Targa header */ +{ + char targaheader[18]; + + /* Set unused fields of header to 0 */ + MEMZERO(targaheader, SIZEOF(targaheader)); + + if (num_colors > 0) { + targaheader[1] = 1; /* color map type 1 */ + targaheader[5] = (char) (num_colors & 0xFF); + targaheader[6] = (char) (num_colors >> 8); + targaheader[7] = 24; /* 24 bits per cmap entry */ + } + + targaheader[12] = (char) (cinfo->output_width & 0xFF); + targaheader[13] = (char) (cinfo->output_width >> 8); + targaheader[14] = (char) (cinfo->output_height & 0xFF); + targaheader[15] = (char) (cinfo->output_height >> 8); + targaheader[17] = 0x20; /* Top-down, non-interlaced */ + + if (cinfo->out_color_space == JCS_GRAYSCALE) { + targaheader[2] = 3; /* image type = uncompressed gray-scale */ + targaheader[16] = 8; /* bits per pixel */ + } else { /* must be RGB */ + if (num_colors > 0) { + targaheader[2] = 1; /* image type = colormapped RGB */ + targaheader[16] = 8; + } else { + targaheader[2] = 2; /* image type = uncompressed RGB */ + targaheader[16] = 24; + } + } + + if (JFWRITE(dinfo->output_file, targaheader, 18) != (size_t) 18) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * Write some pixel data. + * In this module rows_supplied will always be 1. + */ + +METHODDEF(void) +put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* used for unquantized full-color output */ +{ + tga_dest_ptr dest = (tga_dest_ptr) dinfo; + register JSAMPROW inptr; + register char * outptr; + register JDIMENSION col; + + inptr = dest->pub.buffer[0]; + outptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + outptr[0] = (char) GETJSAMPLE(inptr[2]); /* RGB to BGR order */ + outptr[1] = (char) GETJSAMPLE(inptr[1]); + outptr[2] = (char) GETJSAMPLE(inptr[0]); + inptr += 3, outptr += 3; + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + +METHODDEF(void) +put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* used for grayscale OR quantized color output */ +{ + tga_dest_ptr dest = (tga_dest_ptr) dinfo; + register JSAMPROW inptr; + register char * outptr; + register JDIMENSION col; + + inptr = dest->pub.buffer[0]; + outptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + *outptr++ = (char) GETJSAMPLE(*inptr++); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Write some demapped pixel data when color quantization is in effect. + * For Targa, this is only applied to grayscale data. + */ + +METHODDEF(void) +put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + tga_dest_ptr dest = (tga_dest_ptr) dinfo; + register JSAMPROW inptr; + register char * outptr; + register JSAMPROW color_map0 = cinfo->colormap[0]; + register JDIMENSION col; + + inptr = dest->pub.buffer[0]; + outptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + *outptr++ = (char) GETJSAMPLE(color_map0[GETJSAMPLE(*inptr++)]); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Startup: write the file header. + */ + +METHODDEF(void) +start_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + tga_dest_ptr dest = (tga_dest_ptr) dinfo; + int num_colors, i; + FILE *outfile; + + if (cinfo->out_color_space == JCS_GRAYSCALE) { + /* Targa doesn't have a mapped grayscale format, so we will */ + /* demap quantized gray output. Never emit a colormap. */ + write_header(cinfo, dinfo, 0); + if (cinfo->quantize_colors) + dest->pub.put_pixel_rows = put_demapped_gray; + else + dest->pub.put_pixel_rows = put_gray_rows; + } else if (cinfo->out_color_space == JCS_RGB) { + if (cinfo->quantize_colors) { + /* We only support 8-bit colormap indexes, so only 256 colors */ + num_colors = cinfo->actual_number_of_colors; + if (num_colors > 256) + ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, num_colors); + write_header(cinfo, dinfo, num_colors); + /* Write the colormap. Note Targa uses BGR byte order */ + outfile = dest->pub.output_file; + for (i = 0; i < num_colors; i++) { + putc(GETJSAMPLE(cinfo->colormap[2][i]), outfile); + putc(GETJSAMPLE(cinfo->colormap[1][i]), outfile); + putc(GETJSAMPLE(cinfo->colormap[0][i]), outfile); + } + dest->pub.put_pixel_rows = put_gray_rows; + } else { + write_header(cinfo, dinfo, 0); + dest->pub.put_pixel_rows = put_pixel_rows; + } + } else { + ERREXIT(cinfo, JERR_TGA_COLORSPACE); + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + /* Make sure we wrote the output file OK */ + fflush(dinfo->output_file); + if (ferror(dinfo->output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for Targa format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_targa (j_decompress_ptr cinfo) +{ + tga_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (tga_dest_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(tga_dest_struct)); + dest->pub.start_output = start_output_tga; + dest->pub.finish_output = finish_output_tga; + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Create I/O buffer. Note we make this near on a PC. */ + dest->buffer_width = cinfo->output_width * cinfo->output_components; + dest->iobuffer = (char *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) (dest->buffer_width * SIZEOF(char))); + + /* Create decompressor output buffer. */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + + return (djpeg_dest_ptr) dest; +} + +#endif /* TARGA_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/ANNOUNCE b/src/SDL2/external/libpng-1.6.2/ANNOUNCE new file mode 100644 index 000000000..37a4b4939 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/ANNOUNCE @@ -0,0 +1,49 @@ + +Libpng 1.6.2 - April 25, 2013 + +This is a public release of libpng, intended for use in production codes. + +Files available for download: + +Source files with LF line endings (for Unix/Linux) and with a +"configure" script + + libpng-1.6.2.tar.xz (LZMA-compressed, recommended) + libpng-1.6.2.tar.gz + +Source files with CRLF line endings (for Windows), without the +"configure" script + + lpng162.7z (LZMA-compressed, recommended) + lpng162.zip + +Other information: + + libpng-1.6.2-README.txt + libpng-1.6.2-LICENSE.txt + +Changes since the last public release (1.6.1): + + Updated documentation of 1.5.x to 1.6.x changes in iCCP chunk handling. + Fixed incorrect warning of excess deflate data. End condition - the + warning would be produced if the end of the deflate stream wasn't read + in the last row. The warning is harmless. + Corrected the test on user transform changes on read. It was in the + png_set of the transform function, but that doesn't matter unless the + transform function changes the rowbuf size, and that is only valid if + transform_info is called. + Corrected a misplaced closing bracket in contrib/libtests/pngvalid.c + (Flavio Medeiros). + Corrected length written to uncompressed iTXt chunks (Samuli Suominen). + Added contrib/tools/fixitxt.c, to repair the erroneous iTXt chunk length + written by libpng-1.6.0 and 1.6.1. + Disallow storing sRGB information when the sRGB is not supported. + Merge pngtest.c with libpng-1.7.0 + +Send comments/corrections/commendations to png-mng-implement at lists.sf.net +(subscription required; visit +https://lists.sourceforge.net/lists/listinfo/png-mng-implement +to subscribe) +or to glennrp at users.sourceforge.net + +Glenn R-P diff --git a/src/SDL2/external/libpng-1.6.2/Android.mk b/src/SDL2/external/libpng-1.6.2/Android.mk new file mode 100644 index 000000000..38f71da27 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/Android.mk @@ -0,0 +1,28 @@ +LOCAL_PATH:= $(call my-dir) + +include $(CLEAR_VARS) + +common_SRC_FILES := \ + png.c pngerror.c \ + pngget.c pngmem.c pngpread.c pngread.c pngrio.c pngrtran.c pngrutil.c \ + pngset.c pngtrans.c pngwio.c pngwrite.c pngwtran.c pngwutil.c + +common_CFLAGS := ## -fomit-frame-pointer + +common_C_INCLUDES += \ + +# For the host +# ===================================================== + +LOCAL_SRC_FILES := $(common_SRC_FILES) +LOCAL_CFLAGS += $(common_CFLAGS) +LOCAL_C_INCLUDES += $(common_C_INCLUDES) + +LOCAL_MODULE:= png + +LOCAL_COPY_HEADERS_TO := $(common_COPY_HEADERS_TO) +LOCAL_COPY_HEADERS := $(common_COPY_HEADERS) + +include $(BUILD_STATIC_LIBRARY) +#include $(BUILD_SHARED_LIBRARY) + diff --git a/src/SDL2/external/libpng-1.6.2/CHANGES b/src/SDL2/external/libpng-1.6.2/CHANGES new file mode 100644 index 000000000..4d55fc03c --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/CHANGES @@ -0,0 +1,4516 @@ +#if 0 +CHANGES - changes for libpng + +Version 0.2 + added reader into png.h + fixed small problems in stub file + +Version 0.3 + added pull reader + split up pngwrite.c to several files + added pnglib.txt + added example.c + cleaned up writer, adding a few new transformations + fixed some bugs in writer + interfaced with zlib 0.5 + added K&R support + added check for 64 KB blocks for 16-bit machines + +Version 0.4 + cleaned up code and commented code + simplified time handling into png_time + created png_color_16 and png_color_8 to handle color needs + cleaned up color type defines + fixed various bugs + made various names more consistent + interfaced with zlib 0.71 + cleaned up zTXt reader and writer (using zlib's Reset functions) + split transformations into pngrtran.c and pngwtran.c + +Version 0.5 + interfaced with zlib 0.8 + fixed many reading and writing bugs + saved using 3 spaces instead of tabs + +Version 0.6 + added png_large_malloc() and png_large_free() + added png_size_t + cleaned up some compiler warnings + added png_start_read_image() + +Version 0.7 + cleaned up lots of bugs + finished dithering and other stuff + added test program + changed name from pnglib to libpng + +Version 0.71 [June, 1995] + changed pngtest.png for zlib 0.93 + fixed error in libpng.txt and example.c + +Version 0.8 + cleaned up some bugs + added png_set_filler() + split up pngstub.c into pngmem.c, pngio.c, and pngerror.c + added #define's to remove unwanted code + moved png_info_init() to png.c + added old_size into png_realloc() + added functions to manually set filtering and compression info + changed compression parameters based on image type + optimized filter selection code + added version info + changed external functions passing floats to doubles (k&r problems?) + put all the configurable stuff in pngconf.h + enabled png_set_shift to work with paletted images on read + added png_read_update_info() - updates info structure with transformations + +Version 0.81 [August, 1995] + incorporated Tim Wegner's medium model code (thanks, Tim) + +Version 0.82 [September, 1995] + [unspecified changes] + +Version 0.85 [December, 1995] + added more medium model code (almost everything's a far) + added i/o, error, and memory callback functions + fixed some bugs (16-bit, 4-bit interlaced, etc.) + added first run progressive reader (barely tested) + +Version 0.86 [January, 1996] + fixed bugs + improved documentation + +Version 0.87 [January, 1996] + fixed medium model bugs + fixed other bugs introduced in 0.85 and 0.86 + added some minor documentation + +Version 0.88 [January, 1996] + fixed progressive bugs + replaced tabs with spaces + cleaned up documentation + added callbacks for read/write and warning/error functions + +Version 0.89 [July, 1996] + Added new initialization API to make libpng work better with shared libs + we now have png_create_read_struct(), png_create_write_struct(), + png_create_info_struct(), png_destroy_read_struct(), and + png_destroy_write_struct() instead of the separate calls to + malloc and png_read_init(), png_info_init(), and png_write_init() + Changed warning/error callback functions to fix bug - this means you + should use the new initialization API if you were using the old + png_set_message_fn() calls, and that the old API no longer exists + so that people are aware that they need to change their code + Changed filter selection API to allow selection of multiple filters + since it didn't work in previous versions of libpng anyways + Optimized filter selection code + Fixed png_set_background() to allow using an arbitrary RGB color for + paletted images + Fixed gamma and background correction for paletted images, so + png_correct_palette is not needed unless you are correcting an + external palette (you will need to #define PNG_CORRECT_PALETTE_SUPPORTED + in pngconf.h) - if nobody uses this, it may disappear in the future. + Fixed bug with Borland 64K memory allocation (Alexander Lehmann) + Fixed bug in interlace handling (Smarasderagd, I think) + Added more error checking for writing and image to reduce invalid files + Separated read and write functions so that they won't both be linked + into a binary when only reading or writing functionality is used + New pngtest image also has interlacing and zTXt + Updated documentation to reflect new API + +Version 0.90 [January, 1997] + Made CRC errors/warnings on critical and ancillary chunks configurable + libpng will use the zlib CRC routines by (compile-time) default + Changed DOS small/medium model memory support - needs zlib 1.04 (Tim Wegner) + Added external C++ wrapper statements to png.h (Gilles Dauphin) + Allow PNG file to be read when some or all of file signature has already + been read from the beginning of the stream. ****This affects the size + of info_struct and invalidates all programs that use a shared libpng**** + Fixed png_filler() declarations + Fixed? background color conversions + Fixed order of error function pointers to match documentation + Current chunk name is now available in png_struct to reduce the number + of nearly identical error messages (will simplify multi-lingual + support when available) + Try to get ready for unknown-chunk callback functions: + - previously read critical chunks are flagged, so the chunk handling + routines can determine if the chunk is in the right place + - all chunk handling routines have the same prototypes, so we will + be able to handle all chunks via a callback mechanism + Try to fix Linux "setjmp" buffer size problems + Removed png_large_malloc, png_large_free, and png_realloc functions. + +Version 0.95 [March, 1997] + Fixed bug in pngwutil.c allocating "up_row" twice and "avg_row" never + Fixed bug in PNG file signature compares when start != 0 + Changed parameter type of png_set_filler(...filler...) from png_byte + to png_uint_32 + Added test for MACOS to ensure that both math.h and fp.h are not #included + Added macros for libpng to be compiled as a Windows DLL (Andreas Kupries) + Added "packswap" transformation, which changes the endianness of + packed-pixel bytes (Kevin Bracey) + Added "strip_alpha" transformation, which removes the alpha channel of + input images without using it (not necessarily a good idea) + Added "swap_alpha" transformation, which puts the alpha channel in front + of the color bytes instead of after + Removed all implicit variable tests which assume NULL == 0 (I think) + Changed several variables to "png_size_t" to show 16/32-bit limitations + Added new pCAL chunk read/write support + Added experimental filter selection weighting (Greg Roelofs) + Removed old png_set_rgbx() and png_set_xrgb() functions that have been + obsolete for about 2 years now (use png_set_filler() instead) + Added macros to read 16- and 32-bit ints directly from buffer, to be + used only on those systems that support it (namely PowerPC and 680x0) + With some testing, this may become the default for MACOS/PPC systems. + Only calculate CRC on data if we are going to use it + Added macros for zTXt compression type PNG_zTXt_COMPRESSION_??? + Added macros for simple libpng debugging output selectable at compile time + Removed PNG_READ_END_MODE in progressive reader (Smarasderagd) + More description of info_struct in libpng.txt and png.h + More instructions in example.c + More chunk types tested in pngtest.c + Renamed pngrcb.c to pngset.c, and all png_read_ functions to be + png_set_. We now have corresponding png_get_ + functions in pngget.c to get information in info_ptr. This isolates + the application from the internal organization of png_info_struct + (good for shared library implementations). + +Version 0.96 [May, 1997] + Fixed serious bug with < 8bpp images introduced in 0.95 + Fixed 256-color transparency bug (Greg Roelofs) + Fixed up documentation (Greg Roelofs, Laszlo Nyul) + Fixed "error" in pngconf.h for Linux setjmp() behavior + Fixed DOS medium model support (Tim Wegner) + Fixed png_check_keyword() for case with error in static string text + Added read of CRC after IEND chunk for embedded PNGs (Laszlo Nyul) + Added typecasts to quiet compiler errors + Added more debugging info + +Version 0.97 [January, 1998] + Removed PNG_USE_OWN_CRC capability + Relocated png_set_crc_action from pngrutil.c to pngrtran.c + Fixed typecasts of "new_key", etc. (Andreas Dilger) + Added RFC 1152 [sic] date support + Fixed bug in gamma handling of 4-bit grayscale + Added 2-bit grayscale gamma handling (Glenn R-P) + Added more typecasts. 65536L becomes (png_uint_32)65536L, etc. (Glenn R-P) + Minor corrections in libpng.txt + Added simple sRGB support (Glenn R-P) + Easier conditional compiling, e.g., + define PNG_READ/WRITE_NOT_FULLY_SUPPORTED; + all configurable options can be selected from command-line instead + of having to edit pngconf.h (Glenn R-P) + Fixed memory leak in pngwrite.c (free info_ptr->text) (Glenn R-P) + Added more conditions for png_do_background, to avoid changing + black pixels to background when a background is supplied and + no pixels are transparent + Repaired PNG_NO_STDIO behavior + Tested NODIV support and made it default behavior (Greg Roelofs) + Added "-m" option and PNGTEST_DEBUG_MEMORY to pngtest (John Bowler) + Regularized version numbering scheme and bumped shared-library major + version number to 2 to avoid problems with libpng 0.89 apps + (Greg Roelofs) + +Version 0.98 [January, 1998] + Cleaned up some typos in libpng.txt and in code documentation + Fixed memory leaks in pCAL chunk processing (Glenn R-P and John Bowler) + Cosmetic change "display_gamma" to "screen_gamma" in pngrtran.c + Changed recommendation about file_gamma for PC images to .51 from .45, + in example.c and libpng.txt, added comments to distinguish between + screen_gamma, viewing_gamma, and display_gamma. + Changed all references to RFC1152 to read RFC1123 and changed the + PNG_TIME_RFC1152_SUPPORTED macro to PNG_TIME_RFC1123_SUPPORTED + Added png_invert_alpha capability (Glenn R-P -- suggestion by Jon Vincent) + Changed srgb_intent from png_byte to int to avoid compiler bugs + +Version 0.99 [January 30, 1998] + Free info_ptr->text instead of end_info_ptr->text in pngread.c (John Bowler) + Fixed a longstanding "packswap" bug in pngtrans.c + Fixed some inconsistencies in pngconf.h that prevented compiling with + PNG_READ_GAMMA_SUPPORTED and PNG_READ_hIST_SUPPORTED undefined + Fixed some typos and made other minor rearrangement of libpng.txt (Andreas) + Changed recommendation about file_gamma for PC images to .50 from .51 in + example.c and libpng.txt, and changed file_gamma for sRGB images to .45 + Added a number of functions to access information from the png structure + png_get_image_height(), etc. (Glenn R-P, suggestion by Brad Pettit) + Added TARGET_MACOS similar to zlib-1.0.8 + Define PNG_ALWAYS_EXTERN when __MWERKS__ && WIN32 are defined + Added type casting to all png_malloc() function calls + +Version 0.99a [January 31, 1998] + Added type casts and parentheses to all returns that return a value.(Tim W.) + +Version 0.99b [February 4, 1998] + Added type cast png_uint_32 on malloc function calls where needed. + Changed type of num_hist from png_uint_32 to int (same as num_palette). + Added checks for rowbytes overflow, in case png_size_t is less than 32 bits. + Renamed makefile.elf to makefile.lnx. + +Version 0.99c [February 7, 1998] + More type casting. Removed erroneous overflow test in pngmem.c. + Added png_buffered_memcpy() and png_buffered_memset(), apply them to rowbytes. + Added UNIX manual pages libpng.3 (incorporating libpng.txt) and png.5. + +Version 0.99d [February 11, 1998] + Renamed "far_to_near()" "png_far_to_near()" + Revised libpng.3 + Version 99c "buffered" operations didn't work as intended. Replaced them + with png_memcpy_check() and png_memset_check(). + Added many "if (png_ptr == NULL) return" to quell compiler warnings about + unused png_ptr, mostly in pngget.c and pngset.c. + Check for overlength tRNS chunk present when indexed-color PLTE is read. + Cleaned up spelling errors in libpng.3/libpng.txt + Corrected a problem with png_get_tRNS() which returned undefined trans array + +Version 0.99e [February 28, 1998] + Corrected png_get_tRNS() again. + Add parentheses for easier reading of pngget.c, fixed "||" should be "&&". + Touched up example.c to make more of it compileable, although the entire + file still can't be compiled (Willem van Schaik) + Fixed a bug in png_do_shift() (Bryan Tsai) + Added a space in png.h prototype for png_write_chunk_start() + Replaced pngtest.png with one created with zlib 1.1.1 + Changed pngtest to report PASS even when file size is different (Jean-loup G.) + Corrected some logic errors in png_do_invert_alpha() (Chris Patterson) + +Version 0.99f [March 5, 1998] + Corrected a bug in pngpread() introduced in version 99c (Kevin Bracey) + Moved makefiles into a "scripts" directory, and added INSTALL instruction file + Added makefile.os2 and pngos2.def (A. Zabolotny) and makefile.s2x (W. Sebok) + Added pointers to "note on libpng versions" in makefile.lnx and README + Added row callback feature when reading and writing nonprogressive rows + and added a test of this feature in pngtest.c + Added user transform callbacks, with test of the feature in pngtest.c + +Version 0.99g [March 6, 1998, morning] + Minor changes to pngtest.c to suppress compiler warnings. + Removed "beta" language from documentation. + +Version 0.99h [March 6, 1998, evening] + Minor changes to previous minor changes to pngtest.c + Changed PNG_READ_NOT_FULLY_SUPPORTED to PNG_READ_TRANSFORMS_NOT_SUPPORTED + and added PNG_PROGRESSIVE_READ_NOT_SUPPORTED macro + Added user transform capability + +Version 1.00 [March 7, 1998] + Changed several typedefs in pngrutil.c + Added makefile.wat (Pawel Mrochen), updated makefile.tc3 (Willem van Schaik) + Replaced "while(1)" with "for(;;)" + Added PNGARG() to prototypes in pngtest.c and removed some prototypes + Updated some of the makefiles (Tom Lane) + Changed some typedefs (s_start, etc.) in pngrutil.c + Fixed dimensions of "short_months" array in pngwrite.c + Replaced ansi2knr.c with the one from jpeg-v6 + +Version 1.0.0 [March 8, 1998] + Changed name from 1.00 to 1.0.0 (Adam Costello) + Added smakefile.ppc (with SCOPTIONS.ppc) for Amiga PPC (Andreas Kleinert) + +Version 1.0.0a [March 9, 1998] + Fixed three bugs in pngrtran.c to make gamma+background handling consistent + (Greg Roelofs) + Changed format of the PNG_LIBPNG_VER integer to xyyzz instead of xyz + for major, minor, and bugfix releases. This is 10001. (Adam Costello, + Tom Lane) + Make months range from 1-12 in png_convert_to_rfc1123 + +Version 1.0.0b [March 13, 1998] + Quieted compiler complaints about two empty "for" loops in pngrutil.c + Minor changes to makefile.s2x + Removed #ifdef/#endif around a png_free() in pngread.c + +Version 1.0.1 [March 14, 1998] + Changed makefile.s2x to reduce security risk of using a relative pathname + Fixed some typos in the documentation (Greg). + Fixed a problem with value of "channels" returned by png_read_update_info() + +Version 1.0.1a [April 21, 1998] + Optimized Paeth calculations by replacing abs() function calls with intrinsics + plus other loop optimizations. Improves avg decoding speed by about 20%. + Commented out i386istic "align" compiler flags in makefile.lnx. + Reduced the default warning level in some makefiles, to make them consistent. + Removed references to IJG and JPEG in the ansi2knr.c copyright statement. + Fixed a bug in png_do_strip_filler with XXRRGGBB => RRGGBB transformation. + Added grayscale and 16-bit capability to png_do_read_filler(). + Fixed a bug in pngset.c, introduced in version 0.99c, that sets rowbytes + too large when writing an image with bit_depth < 8 (Bob Dellaca). + Corrected some bugs in the experimental weighted filtering heuristics. + Moved a misplaced pngrutil code block that truncates tRNS if it has more + than num_palette entries -- test was done before num_palette was defined. + Fixed a png_convert_to_rfc1123() bug that converts day 31 to 0 (Steve Eddins). + Changed compiler flags in makefile.wat for better optimization + (Pawel Mrochen). + +Version 1.0.1b [May 2, 1998] + Relocated png_do_gray_to_rgb() within png_do_read_transformations() (Greg). + Relocated the png_composite macros from pngrtran.c to png.h (Greg). + Added makefile.sco (contributed by Mike Hopkirk). + Fixed two bugs (missing definitions of "istop") introduced in libpng-1.0.1a. + Fixed a bug in pngrtran.c that would set channels=5 under some circumstances. + More work on the Paeth-filtering, achieving imperceptible speedup + (A Kleinert). + More work on loop optimization which may help when compiled with C++ + compilers. + Added warnings when people try to use transforms they've defined out. + Collapsed 4 "i" and "c" loops into single "i" loops in pngrtran and pngwtran. + Revised paragraph about png_set_expand() in libpng.txt and libpng.3 (Greg) + +Version 1.0.1c [May 11, 1998] + Fixed a bug in pngrtran.c (introduced in libpng-1.0.1a) where the masks for + filler bytes should have been 0xff instead of 0xf. + Added max_pixel_depth=32 in pngrutil.c when using FILLER with palette images. + Moved PNG_WRITE_WEIGHTED_FILTER_SUPPORTED and PNG_WRITE_FLUSH_SUPPORTED + out of the PNG_WRITE_TRANSFORMS_NOT_SUPPORTED block of pngconf.h + Added "PNG_NO_WRITE_TRANSFORMS" etc., as alternatives for *_NOT_SUPPORTED, + for consistency, in pngconf.h + Added individual "ifndef PNG_NO_[CAPABILITY]" in pngconf.h to make it easier + to remove unwanted capabilities via the compile line + Made some corrections to grammar (which, it's) in documentation (Greg). + Corrected example.c, use of row_pointers in png_write_image(). + +Version 1.0.1d [May 24, 1998] + Corrected several statements that used side effects illegally in pngrutil.c + and pngtrans.c, that were introduced in version 1.0.1b + Revised png_read_rows() to avoid repeated if-testing for NULL (A Kleinert) + More corrections to example.c, use of row_pointers in png_write_image() + and png_read_rows(). + Added pngdll.mak and pngdef.pas to scripts directory, contributed by + Bob Dellaca, to make a png32bd.dll with Borland C++ 4.5 + Fixed error in example.c with png_set_text: num_text is 3, not 2 (Guido V.) + Changed several loops from count-down to count-up, for consistency. + +Version 1.0.1e [June 6, 1998] + Revised libpng.txt and libpng.3 description of png_set_read|write_fn(), and + added warnings when people try to set png_read_fn and png_write_fn in + the same structure. + Added a test such that png_do_gamma will be done when num_trans==0 + for truecolor images that have defined a background. This corrects an + error that was introduced in libpng-0.90 that can cause gamma processing + to be skipped. + Added tests in png.h to include "trans" and "trans_values" in structures + when PNG_READ_BACKGROUND_SUPPORTED or PNG_READ_EXPAND_SUPPORTED is defined. + Add png_free(png_ptr->time_buffer) in png_destroy_read_struct() + Moved png_convert_to_rfc_1123() from pngwrite.c to png.c + Added capability for user-provided malloc_fn() and free_fn() functions, + and revised pngtest.c to demonstrate their use, replacing the + PNGTEST_DEBUG_MEM feature. + Added makefile.w32, for Microsoft C++ 4.0 and later (Tim Wegner). + +Version 1.0.2 [June 14, 1998] + Fixed two bugs in makefile.bor . + +Version 1.0.2a [December 30, 1998] + Replaced and extended code that was removed from png_set_filler() in 1.0.1a. + Fixed a bug in png_do_filler() that made it fail to write filler bytes in + the left-most pixel of each row (Kevin Bracey). + Changed "static pngcharp tIME_string" to "static char tIME_string[30]" + in pngtest.c (Duncan Simpson). + Fixed a bug in pngtest.c that caused pngtest to try to write a tIME chunk + even when no tIME chunk was present in the source file. + Fixed a problem in pngrutil.c: gray_to_rgb didn't always work with 16-bit. + Fixed a problem in png_read_push_finish_row(), which would not skip some + passes that it should skip, for images that are less than 3 pixels high. + Interchanged the order of calls to png_do_swap() and png_do_shift() + in pngwtran.c (John Cromer). + Added #ifdef PNG_DEBUG/#endif surrounding use of PNG_DEBUG in png.h . + Changed "bad adaptive filter type" from error to warning in pngrutil.c . + Fixed a documentation error about default filtering with 8-bit indexed-color. + Separated the PNG_NO_STDIO macro into PNG_NO_STDIO and PNG_NO_CONSOLE_IO + (L. Peter Deutsch). + Added png_set_rgb_to_gray() and png_get_rgb_to_gray_status() functions. + Added png_get_copyright() and png_get_header_version() functions. + Revised comments on png_set_progressive_read_fn() in libpng.txt and example.c + Added information about debugging in libpng.txt and libpng.3 . + Changed "ln -sf" to "ln -s -f" in makefile.s2x, makefile.lnx, and + makefile.sco. + Removed lines after Dynamic Dependencies" in makefile.aco . + Revised makefile.dec to make a shared library (Jeremie Petit). + Removed trailing blanks from all files. + +Version 1.0.2a [January 6, 1999] + Removed misplaced #endif and #ifdef PNG_NO_EXTERN near the end of png.h + Added "if" tests to silence complaints about unused png_ptr in png.h and png.c + Changed "check_if_png" function in example.c to return true (nonzero) if PNG. + Changed libpng.txt to demonstrate png_sig_cmp() instead of png_check_sig() + which is obsolete. + +Version 1.0.3 [January 14, 1999] + Added makefile.hux, for Hewlett Packard HPUX 10.20 and 11.00 (Jim Rice) + Added a statement of Y2K compliance in png.h, libpng.3, and Y2KINFO. + +Version 1.0.3a [August 12, 1999] + Added check for PNG_READ_INTERLACE_SUPPORTED in pngread.c; issue a warning + if an attempt is made to read an interlaced image when it's not supported. + Added check if png_ptr->trans is defined before freeing it in pngread.c + Modified the Y2K statement to include versions back to version 0.71 + Fixed a bug in the check for valid IHDR bit_depth/color_types in pngrutil.c + Modified makefile.wat (added -zp8 flag, ".symbolic", changed some comments) + Replaced leading blanks with tab characters in makefile.hux + Changed "dworkin.wustl.edu" to "ccrc.wustl.edu" in various documents. + Changed (float)red and (float)green to (double)red, (double)green + in png_set_rgb_to_gray() to avoid "promotion" problems in AIX. + Fixed a bug in pngconf.h that omitted when PNG_DEBUG==0 (K Bracey). + Reformatted libpng.3 and libpngpf.3 with proper fonts (script by J. vanZandt). + Updated documentation to refer to the PNG-1.2 specification. + Removed ansi2knr.c and left pointers to the latest source for ansi2knr.c + in makefile.knr, INSTALL, and README (L. Peter Deutsch) + Fixed bugs in calculation of the length of rowbytes when adding alpha + channels to 16-bit images, in pngrtran.c (Chris Nokleberg) + Added function png_set_user_transform_info() to store user_transform_ptr, + user_depth, and user_channels into the png_struct, and a function + png_get_user_transform_ptr() to retrieve the pointer (Chris Nokleberg) + Added function png_set_empty_plte_permitted() to make libpng useable + in MNG applications. + Corrected the typedef for png_free_ptr in png.h (Jesse Jones). + Correct gamma with srgb is 45455 instead of 45000 in pngrutil.c, to be + consistent with PNG-1.2, and allow variance of 500 before complaining. + Added assembler code contributed by Intel in file pngvcrd.c and modified + makefile.w32 to use it (Nirav Chhatrapati, INTEL Corporation, + Gilles Vollant) + Changed "ln -s -f" to "ln -f -s" in the makefiles to make Solaris happy. + Added some aliases for png_set_expand() in pngrtran.c, namely + png_set_expand_PLTE(), png_set_expand_depth(), and png_set_expand_tRNS() + (Greg Roelofs, in "PNG: The Definitive Guide"). + Added makefile.beo for BEOS on X86, contributed by Sander Stok. + +Version 1.0.3b [August 26, 1999] + Replaced 2147483647L several places with PNG_MAX_UINT macro, defined in png.h + Changed leading blanks to tabs in all makefiles. + Define PNG_USE_PNGVCRD in makefile.w32, to get MMX assembler code. + Made alternate versions of png_set_expand() in pngrtran.c, namely + png_set_gray_1_2_4_to_8, png_set_palette_to_rgb, and png_set_tRNS_to_alpha + (Greg Roelofs, in "PNG: The Definitive Guide"). Deleted the 1.0.3a aliases. + Relocated start of 'extern "C"' block in png.h so it doesn't include pngconf.h + Revised calculation of num_blocks in pngmem.c to avoid a potentially + negative shift distance, whose results are undefined in the C language. + Added a check in pngset.c to prevent writing multiple tIME chunks. + Added a check in pngwrite.c to detect invalid small window_bits sizes. + +Version 1.0.3d [September 4, 1999] + Fixed type casting of igamma in pngrutil.c + Added new png_expand functions to scripts/pngdef.pas and pngos2.def + Added a demo read_user_transform_fn that examines the row filters in pngtest.c + +Version 1.0.4 [September 24, 1999] + Define PNG_ALWAYS_EXTERN in pngconf.h if __STDC__ is defined + Delete #define PNG_INTERNAL and include "png.h" from pngasmrd.h + Made several minor corrections to pngtest.c + Renamed the makefiles with longer but more user friendly extensions. + Copied the PNG copyright and license to a separate LICENSE file. + Revised documentation, png.h, and example.c to remove reference to + "viewing_gamma" which no longer appears in the PNG specification. + Revised pngvcrd.c to use MMX code for interlacing only on the final pass. + Updated pngvcrd.c to use the faster C filter algorithms from libpng-1.0.1a + Split makefile.win32vc into two versions, makefile.vcawin32 (uses MMX + assembler code) and makefile.vcwin32 (doesn't). + Added a CPU timing report to pngtest.c (enabled by defining PNGTEST_TIMING) + Added a copy of pngnow.png to the distribution. + +Version 1.0.4a [September 25, 1999] + Increase max_pixel_depth in pngrutil.c if a user transform needs it. + Changed several division operations to right-shifts in pngvcrd.c + +Version 1.0.4b [September 30, 1999] + Added parentheses in line 3732 of pngvcrd.c + Added a comment in makefile.linux warning about buggy -O3 in pgcc 2.95.1 + +Version 1.0.4c [October 1, 1999] + Added a "png_check_version" function in png.c and pngtest.c that will generate + a helpful compiler error if an old png.h is found in the search path. + Changed type of png_user_transform_depth|channels from int to png_byte. + +Version 1.0.4d [October 6, 1999] + Changed 0.45 to 0.45455 in png_set_sRGB() + Removed unused PLTE entries from pngnow.png + Re-enabled some parts of pngvcrd.c (png_combine_row) that work properly. + +Version 1.0.4e [October 10, 1999] + Fixed sign error in pngvcrd.c (Greg Roelofs) + Replaced some instances of memcpy with simple assignments in pngvcrd (GR-P) + +Version 1.0.4f [October 15, 1999] + Surrounded example.c code with #if 0 .. #endif to prevent people from + inadvertently trying to compile it. + Changed png_get_header_version() from a function to a macro in png.h + Added type casting mostly in pngrtran.c and pngwtran.c + Removed some pointless "ptr = NULL" in pngmem.c + Added a "contrib" directory containing the source code from Greg's book. + +Version 1.0.5 [October 15, 1999] + Minor editing of the INSTALL and README files. + +Version 1.0.5a [October 23, 1999] + Added contrib/pngsuite and contrib/pngminus (Willem van Schaik) + Fixed a typo in the png_set_sRGB() function call in example.c (Jan Nijtmans) + Further optimization and bugfix of pngvcrd.c + Revised pngset.c so that it does not allocate or free memory in the user's + text_ptr structure. Instead, it makes its own copy. + Created separate write_end_info_struct in pngtest.c for a more severe test. + Added code in pngwrite.c to free info_ptr->text[i].key to stop a memory leak. + +Version 1.0.5b [November 23, 1999] + Moved PNG_FLAG_HAVE_CHUNK_HEADER, PNG_FLAG_BACKGROUND_IS_GRAY and + PNG_FLAG_WROTE_tIME from flags to mode. + Added png_write_info_before_PLTE() function. + Fixed some typecasting in contrib/gregbook/*.c + Updated scripts/makevms.com and added makevms.com to contrib/gregbook + and contrib/pngminus (Martin Zinser) + +Version 1.0.5c [November 26, 1999] + Moved png_get_header_version from png.h to png.c, to accommodate ansi2knr. + Removed all global arrays (according to PNG_NO_GLOBAL_ARRAYS macro), to + accommodate making DLL's: Moved usr_png_ver from global variable to function + png_get_header_ver() in png.c. Moved png_sig to png_sig_bytes in png.c and + eliminated use of png_sig in pngwutil.c. Moved the various png_CHNK arrays + into pngtypes.h. Eliminated use of global png_pass arrays. Declared the + png_CHNK and png_pass arrays to be "const". Made the global arrays + available to applications (although none are used in libpng itself) when + PNG_NO_GLOBAL_ARRAYS is not defined or when PNG_GLOBAL_ARRAYS is defined. + Removed some extraneous "-I" from contrib/pngminus/makefile.std + Changed the PNG_sRGB_INTENT macros in png.h to be consistent with PNG-1.2. + Change PNG_SRGB_INTENT to PNG_sRGB_INTENT in libpng.txt and libpng.3 + +Version 1.0.5d [November 29, 1999] + Add type cast (png_const_charp) two places in png.c + Eliminated pngtypes.h; use macros instead to declare PNG_CHNK arrays. + Renamed "PNG_GLOBAL_ARRAYS" to "PNG_USE_GLOBAL_ARRAYS" and made available + to applications a macro "PNG_USE_LOCAL_ARRAYS". + comment out (with #ifdef) all the new declarations when + PNG_USE_GLOBAL_ARRAYS is defined. + Added PNG_EXPORT_VAR macro to accommodate making DLL's. + +Version 1.0.5e [November 30, 1999] + Added iCCP, iTXt, and sPLT support; added "lang" member to the png_text + structure; refactored the inflate/deflate support to make adding new chunks + with trailing compressed parts easier in the future, and added new functions + png_free_iCCP, png_free_pCAL, png_free_sPLT, png_free_text, png_get_iCCP, + png_get_spalettes, png_set_iCCP, png_set_spalettes (Eric S. Raymond). + NOTE: Applications that write text chunks MUST define png_text->lang + before calling png_set_text(). It must be set to NULL if you want to + write tEXt or zTXt chunks. If you want your application to be able to + run with older versions of libpng, use + + #ifdef PNG_iTXt_SUPPORTED + png_text[i].lang = NULL; + #endif + + Changed png_get_oFFs() and png_set_oFFs() to use signed rather than unsigned + offsets (Eric S. Raymond). + Combined PNG_READ_cHNK_SUPPORTED and PNG_WRITE_cHNK_SUPPORTED macros into + PNG_cHNK_SUPPORTED and combined the three types of PNG_text_SUPPORTED + macros, leaving the separate macros also available. + Removed comments on #endifs at the end of many short, non-nested #if-blocks. + +Version 1.0.5f [December 6, 1999] + Changed makefile.solaris to issue a warning about potential problems when + the ucb "ld" is in the path ahead of the ccs "ld". + Removed "- [date]" from the "synopsis" line in libpng.3 and libpngpf.3. + Added sCAL chunk support (Eric S. Raymond). + +Version 1.0.5g [December 7, 1999] + Fixed "png_free_spallettes" typo in png.h + Added code to handle new chunks in pngpread.c + Moved PNG_CHNK string macro definitions outside of PNG_NO_EXTERN block + Added "translated_key" to png_text structure and png_write_iTXt(). + Added code in pngwrite.c to work around a newly discovered zlib bug. + +Version 1.0.5h [December 10, 1999] + NOTE: regarding the note for version 1.0.5e, the following must also + be included in your code: + png_text[i].translated_key = NULL; + Unknown chunk handling is now supported. + Option to eliminate all floating point support was added. Some new + fixed-point functions such as png_set_gAMA_fixed() were added. + Expanded tabs and removed trailing blanks in source files. + +Version 1.0.5i [December 13, 1999] + Added some type casts to silence compiler warnings. + Renamed "png_free_spalette" to "png_free_spalettes" for consistency. + Removed leading blanks from a #define in pngvcrd.c + Added some parameters to the new png_set_keep_unknown_chunks() function. + Added a test for up->location != 0 in the first instance of writing + unknown chunks in pngwrite.c + Changed "num" to "i" in png_free_spalettes() and png_free_unknowns() to + prevent recursion. + Added png_free_hIST() function. + Various patches to fix bugs in the sCAL and integer cHRM processing, + and to add some convenience macros for use with sCAL. + +Version 1.0.5j [December 21, 1999] + Changed "unit" parameter of png_write_sCAL from png_byte to int, to work + around buggy compilers. + Added new type "png_fixed_point" for integers that hold float*100000 values + Restored backward compatibility of tEXt/zTXt chunk processing: + Restored the first four members of png_text to the same order as v.1.0.5d. + Added members "lang_key" and "itxt_length" to png_text struct. Set + text_length=0 when "text" contains iTXt data. Use the "compression" + member to distinguish among tEXt/zTXt/iTXt types. Added + PNG_ITXT_COMPRESSION_NONE (1) and PNG_ITXT_COMPRESSION_zTXt(2) macros. + The "Note" above, about backward incompatibility of libpng-1.0.5e, no + longer applies. + Fixed png_read|write_iTXt() to read|write parameters in the right order, + and to write the iTXt chunk after IDAT if it appears in the end_ptr. + Added pnggccrd.c, version of pngvcrd.c Intel assembler for gcc (Greg Roelofs) + Reversed the order of trying to write floating-point and fixed-point gAMA. + +Version 1.0.5k [December 27, 1999] + Added many parentheses, e.g., "if (a && b & c)" becomes "if (a && (b & c))" + Added png_handle_as_unknown() function (Glenn) + Added png_free_chunk_list() function and chunk_list and num_chunk_list members + of png_ptr. + Eliminated erroneous warnings about multiple sPLT chunks and sPLT-after-PLTE. + Fixed a libpng-1.0.5h bug in pngrutil.c that was issuing erroneous warnings + about ignoring incorrect gAMA with sRGB (gAMA was in fact not ignored) + Added png_free_tRNS(); png_set_tRNS() now malloc's its own trans array (ESR). + Define png_get_int_32 when oFFs chunk is supported as well as when pCAL is. + Changed type of proflen from png_int_32 to png_uint_32 in png_get_iCCP(). + +Version 1.0.5l [January 1, 2000] + Added functions png_set_read_user_chunk_fn() and png_get_user_chunk_ptr() + for setting a callback function to handle unknown chunks and for + retrieving the associated user pointer (Glenn). + +Version 1.0.5m [January 7, 2000] + Added high-level functions png_read_png(), png_write_png(), png_free_pixels(). + +Version 1.0.5n [January 9, 2000] + Added png_free_PLTE() function, and modified png_set_PLTE() to malloc its + own memory for info_ptr->palette. This makes it safe for the calling + application to free its copy of the palette any time after it calls + png_set_PLTE(). + +Version 1.0.5o [January 20, 2000] + Cosmetic changes only (removed some trailing blanks and TABs) + +Version 1.0.5p [January 31, 2000] + Renamed pngdll.mak to makefile.bd32 + Cosmetic changes in pngtest.c + +Version 1.0.5q [February 5, 2000] + Relocated the makefile.solaris warning about PATH problems. + Fixed pngvcrd.c bug by pushing/popping registers in mmxsupport (Bruce Oberg) + Revised makefile.gcmmx + Added PNG_SETJMP_SUPPORTED, PNG_SETJMP_NOT_SUPPORTED, and PNG_ABORT() macros + +Version 1.0.5r [February 7, 2000] + Removed superfluous prototype for png_get_itxt from png.h + Fixed a bug in pngrtran.c that improperly expanded the background color. + Return *num_text=0 from png_get_text() when appropriate, and fix documentation + of png_get_text() in libpng.txt/libpng.3. + +Version 1.0.5s [February 18, 2000] + Added "png_jmp_env()" macro to pngconf.h, to help people migrate to the + new error handler that's planned for the next libpng release, and changed + example.c, pngtest.c, and contrib programs to use this macro. + Revised some of the DLL-export macros in pngconf.h (Greg Roelofs) + Fixed a bug in png_read_png() that caused it to fail to expand some images + that it should have expanded. + Fixed some mistakes in the unused and undocumented INCH_CONVERSIONS functions + in pngget.c + Changed the allocation of palette, history, and trans arrays back to + the version 1.0.5 method (linking instead of copying) which restores + backward compatibility with version 1.0.5. Added some remarks about + that in example.c. Added "free_me" member to info_ptr and png_ptr + and added png_free_data() function. + Updated makefile.linux and makefile.gccmmx to make directories conditionally. + Made cosmetic changes to pngasmrd.h + Added png_set_rows() and png_get_rows(), for use with png_read|write_png(). + Modified png_read_png() to allocate info_ptr->row_pointers only if it + hasn't already been allocated. + +Version 1.0.5t [March 4, 2000] + Changed png_jmp_env() migration aiding macro to png_jmpbuf(). + Fixed "interlace" typo (should be "interlaced") in contrib/gregbook/read2-x.c + Fixed bug with use of PNG_BEFORE_IHDR bit in png_ptr->mode, introduced when + PNG_FLAG_HAVE_CHUNK_HEADER was moved into png_ptr->mode in version 1.0.5b + Files in contrib/gregbook were revised to use png_jmpbuf() and to select + a 24-bit visual if one is available, and to allow abbreviated options. + Files in contrib/pngminus were revised to use the png_jmpbuf() macro. + Removed spaces in makefile.linux and makefile.gcmmx, introduced in 1.0.5s + +Version 1.0.5u [March 5, 2000] + Simplified the code that detects old png.h in png.c and pngtest.c + Renamed png_spalette (_p, _pp) to png_sPLT_t (_tp, _tpp) + Increased precision of rgb_to_gray calculations from 8 to 15 bits and + added png_set_rgb_to_gray_fixed() function. + Added makefile.bc32 (32-bit Borland C++, C mode) + +Version 1.0.5v [March 11, 2000] + Added some parentheses to the png_jmpbuf macro definition. + Updated references to the zlib home page, which has moved to freesoftware.com. + Corrected bugs in documentation regarding png_read_row() and png_write_row(). + Updated documentation of png_rgb_to_gray calculations in libpng.3/libpng.txt. + Renamed makefile.borland,turboc3 back to makefile.bor,tc3 as in version 1.0.3, + revised borland makefiles; added makefile.ibmvac3 and makefile.gcc (Cosmin) + +Version 1.0.6 [March 20, 2000] + Minor revisions of makefile.bor, libpng.txt, and gregbook/rpng2-win.c + Added makefile.sggcc (SGI IRIX with gcc) + +Version 1.0.6d [April 7, 2000] + Changed sprintf() to strcpy() in png_write_sCAL_s() to work without STDIO + Added data_length parameter to png_decompress_chunk() function + Revised documentation to remove reference to abandoned png_free_chnk functions + Fixed an error in png_rgb_to_gray_fixed() + Revised example.c, usage of png_destroy_write_struct(). + Renamed makefile.ibmvac3 to makefile.ibmc, added libpng.icc IBM project file + Added a check for info_ptr->free_me&PNG_FREE_TEXT when freeing text in png.c + Simplify png_sig_bytes() function to remove use of non-ISO-C strdup(). + +Version 1.0.6e [April 9, 2000] + Added png_data_freer() function. + In the code that checks for over-length tRNS chunks, added check of + info_ptr->num_trans as well as png_ptr->num_trans (Matthias Benckmann) + Minor revisions of libpng.txt/libpng.3. + Check for existing data and free it if the free_me flag is set, in png_set_*() + and png_handle_*(). + Only define PNG_WEIGHTED_FILTERS_SUPPORTED when PNG_FLOATING_POINT_SUPPORTED + is defined. + Changed several instances of PNG_NO_CONSOLE_ID to PNG_NO_STDIO in pngrutil.c + and mentioned the purposes of the two macros in libpng.txt/libpng.3. + +Version 1.0.6f [April 14, 2000] + Revised png_set_iCCP() and png_set_rows() to avoid prematurely freeing data. + Add checks in png_set_text() for NULL members of the input text structure. + Revised libpng.txt/libpng.3. + Removed superfluous prototype for png_set_iTXt from png.h + Removed "else" from pngread.c, after png_error(), and changed "0" to "length". + Changed several png_errors about malformed ancillary chunks to png_warnings. + +Version 1.0.6g [April 24, 2000] + Added png_pass-* arrays to pnggccrd.c when PNG_USE_LOCAL_ARRAYS is defined. + Relocated paragraph about png_set_background() in libpng.3/libpng.txt + and other revisions (Matthias Benckmann) + Relocated info_ptr->free_me, png_ptr->free_me, and other info_ptr and + png_ptr members to restore binary compatibility with libpng-1.0.5 + (breaks compatibility with libpng-1.0.6). + +Version 1.0.6h [April 24, 2000] + Changed shared library so-number pattern from 2.x.y.z to xy.z (this builds + libpng.so.10 & libpng.so.10.6h instead of libpng.so.2 & libpng.so.2.1.0.6h) + This is a temporary change for test purposes. + +Version 1.0.6i [May 2, 2000] + Rearranged some members at the end of png_info and png_struct, to put + unknown_chunks_num and free_me within the original size of the png_structs + and free_me, png_read_user_fn, and png_free_fn within the original png_info, + because some old applications allocate the structs directly instead of + using png_create_*(). + Added documentation of user memory functions in libpng.txt/libpng.3 + Modified png_read_png so that it will use user_allocated row_pointers + if present, unless free_me directs that it be freed, and added description + of the use of png_set_rows() and png_get_rows() in libpng.txt/libpng.3. + Added PNG_LEGACY_SUPPORTED macro, and #ifdef out all new (since version + 1.00) members of png_struct and png_info, to regain binary compatibility + when you define this macro. Capabilities lost in this event + are user transforms (new in version 1.0.0),the user transform pointer + (new in version 1.0.2), rgb_to_gray (new in 1.0.5), iCCP, sCAL, sPLT, + the high-level interface, and unknown chunks support (all new in 1.0.6). + This was necessary because of old applications that allocate the structs + directly as authors were instructed to do in libpng-0.88 and earlier, + instead of using png_create_*(). + Added modes PNG_CREATED_READ_STRUCT and PNG_CREATED_WRITE_STRUCT which + can be used to detect codes that directly allocate the structs, and + code to check these modes in png_read_init() and png_write_init() and + generate a libpng error if the modes aren't set and PNG_LEGACY_SUPPORTED + was not defined. + Added makefile.intel and updated makefile.watcom (Pawel Mrochen) + +Version 1.0.6j [May 3, 2000] + Overloaded png_read_init() and png_write_init() with macros that convert + calls to png_read_init_2() or png_write_init_2() that check the version + and structure sizes. + +Version 1.0.7beta11 [May 7, 2000] + Removed the new PNG_CREATED_READ_STRUCT and PNG_CREATED_WRITE_STRUCT modes + which are no longer used. + Eliminated the three new members of png_text when PNG_LEGACY_SUPPORTED is + defined or when neither PNG_READ_iTXt_SUPPORTED nor PNG_WRITE_iTXT_SUPPORTED + is defined. + Made PNG_NO_READ|WRITE_iTXt the default setting, to avoid memory + overrun when old applications fill the info_ptr->text structure directly. + Added PNGAPI macro, and added it to the definitions of all exported functions. + Relocated version macro definitions ahead of the includes of zlib.h and + pngconf.h in png.h. + +Version 1.0.7beta12 [May 12, 2000] + Revised pngset.c to avoid a problem with expanding the png_debug macro. + Deleted some extraneous defines from pngconf.h + Made PNG_NO_CONSOLE_IO the default condition when PNG_BUILD_DLL is defined. + Use MSC _RPTn debugging instead of fprintf if _MSC_VER is defined. + Added png_access_version_number() function. + Check for mask&PNG_FREE_CHNK (for TEXT, SCAL, PCAL) in png_free_data(). + Expanded libpng.3/libpng.txt information about png_data_freer(). + +Version 1.0.7beta14 [May 17, 2000] (beta13 was not published) + Changed pnggccrd.c and pngvcrd.c to handle bad adaptive filter types as + warnings instead of errors, as pngrutil.c does. + Set the PNG_INFO_IDAT valid flag in png_set_rows() so png_write_png() + will actually write IDATs. + Made the default PNG_USE_LOCAL_ARRAYS depend on PNG_DLL instead of WIN32. + Make png_free_data() ignore its final parameter except when freeing data + that can have multiple instances (text, sPLT, unknowns). + Fixed a new bug in png_set_rows(). + Removed info_ptr->valid tests from png_free_data(), as in version 1.0.5. + Added png_set_invalid() function. + Fixed incorrect illustrations of png_destroy_write_struct() in example.c. + +Version 1.0.7beta15 [May 30, 2000] + Revised the deliberately erroneous Linux setjmp code in pngconf.h to produce + fewer error messages. + Rearranged checks for Z_OK to check the most likely path first in pngpread.c + and pngwutil.c. + Added checks in pngtest.c for png_create_*() returning NULL, and mentioned + in libpng.txt/libpng.3 the need for applications to check this. + Changed names of png_default_*() functions in pngtest to pngtest_*(). + Changed return type of png_get_x|y_offset_*() from png_uint_32 to png_int_32. + Fixed some bugs in the unused PNG_INCH_CONVERSIONS functions in pngget.c + Set each pointer to NULL after freeing it in png_free_data(). + Worked around a problem in pngconf.h; AIX's strings.h defines an "index" + macro that conflicts with libpng's png_color_16.index. (Dimitri + Papadapoulos) + Added "msvc" directory with MSVC++ project files (Simon-Pierre Cadieux). + +Version 1.0.7beta16 [June 4, 2000] + Revised the workaround of AIX string.h "index" bug. + Added a check for overlength PLTE chunk in pngrutil.c. + Added PNG_NO_POINTER_INDEXING macro to use array-indexing instead of pointer + indexing in pngrutil.c and pngwutil.c to accommodate a buggy compiler. + Added a warning in png_decompress_chunk() when it runs out of data, e.g. + when it tries to read an erroneous PhotoShop iCCP chunk. + Added PNG_USE_DLL macro. + Revised the copyright/disclaimer/license notice. + Added contrib/msvctest directory + +Version 1.0.7rc1 [June 9, 2000] + Corrected the definition of PNG_TRANSFORM_INVERT_ALPHA (0x0400 not 0x0200) + Added contrib/visupng directory (Willem van Schaik) + +Version 1.0.7beta18 [June 23, 2000] + Revised PNGAPI definition, and pngvcrd.c to work with __GCC__ + and do not redefine PNGAPI if it is passed in via a compiler directive. + Revised visupng/PngFile.c to remove returns from within the Try block. + Removed leading underscores from "_PNG_H" and "_PNG_SAVE_BSD_SOURCE" macros. + Updated contrib/visupng/cexcept.h to version 1.0.0. + Fixed bugs in pngwrite.c and pngwutil.c that prevented writing iCCP chunks. + +Version 1.0.7rc2 [June 28, 2000] + Updated license to include disclaimers required by UCITA. + Fixed "DJBPP" typo in pnggccrd.c introduced in beta18. + +Version 1.0.7 [July 1, 2000] + Revised the definition of "trans_values" in libpng.3/libpng.txt + +Version 1.0.8beta1 [July 8, 2000] + Added png_free(png_ptr, key) two places in pngpread.c to stop memory leaks. + Changed PNG_NO_STDIO to PNG_NO_CONSOLE_IO, several places in pngrutil.c and + pngwutil.c. + Changed PNG_EXPORT_VAR to use PNG_IMPEXP, in pngconf.h. + Removed unused "#include " from png.c + Added WindowsCE support. + Revised pnggccrd.c to work with gcc-2.95.2 and in the Cygwin environment. + +Version 1.0.8beta2 [July 10, 2000] + Added project files to the wince directory and made further revisions + of pngtest.c, pngrio.c, and pngwio.c in support of WindowsCE. + +Version 1.0.8beta3 [July 11, 2000] + Only set the PNG_FLAG_FREE_TRNS or PNG_FREE_TRNS flag in png_handle_tRNS() + for indexed-color input files to avoid potential double-freeing trans array + under some unusual conditions; problem was introduced in version 1.0.6f. + Further revisions to pngtest.c and files in the wince subdirectory. + +Version 1.0.8beta4 [July 14, 2000] + Added the files pngbar.png and pngbar.jpg to the distribution. + Added makefile.cygwin, and cygwin support in pngconf.h + Added PNG_NO_ZALLOC_ZERO macro (makes png_zalloc skip zeroing memory) + +Version 1.0.8rc1 [July 16, 2000] + Revised png_debug() macros and statements to eliminate compiler warnings. + +Version 1.0.8 [July 24, 2000] + Added png_flush() in pngwrite.c, after png_write_IEND(). + Updated makefile.hpux to build a shared library. + +Version 1.0.9beta1 [November 10, 2000] + Fixed typo in scripts/makefile.hpux + Updated makevms.com in scripts and contrib/* and contrib/* (Martin Zinser) + Fixed seqence-point bug in contrib/pngminus/png2pnm (Martin Zinser) + Changed "cdrom.com" in documentation to "libpng.org" + Revised pnggccrd.c to get it all working, and updated makefile.gcmmx (Greg). + Changed type of "params" from voidp to png_voidp in png_read|write_png(). + Make sure PNGAPI and PNG_IMPEXP are defined in pngconf.h. + Revised the 3 instances of WRITEFILE in pngtest.c. + Relocated "msvc" and "wince" project subdirectories into "dll" subdirectory. + Updated png.rc in dll/msvc project + Revised makefile.dec to define and use LIBPATH and INCPATH + Increased size of global png_libpng_ver[] array from 12 to 18 chars. + Made global png_libpng_ver[], png_sig[] and png_pass_*[] arrays const. + Removed duplicate png_crc_finish() from png_handle_bKGD() function. + Added a warning when application calls png_read_update_info() multiple times. + Revised makefile.cygwin + Fixed bugs in iCCP support in pngrutil.c and pngwutil.c. + Replaced png_set_empty_plte_permitted() with png_permit_mng_features(). + +Version 1.0.9beta2 [November 19, 2000] + Renamed the "dll" subdirectory "projects". + Added borland project files to "projects" subdirectory. + Set VS_FF_PRERELEASE and VS_FF_PATCHED flags in msvc/png.rc when appropriate. + Add error message in png_set_compression_buffer_size() when malloc fails. + +Version 1.0.9beta3 [November 23, 2000] + Revised PNG_LIBPNG_BUILD_TYPE macro in png.h, used in the msvc project. + Removed the png_flush() in pngwrite.c that crashes some applications + that don't set png_output_flush_fn. + Added makefile.macosx and makefile.aix to scripts directory. + +Version 1.0.9beta4 [December 1, 2000] + Change png_chunk_warning to png_warning in png_check_keyword(). + Increased the first part of msg buffer from 16 to 18 in png_chunk_error(). + +Version 1.0.9beta5 [December 15, 2000] + Added support for filter method 64 (for PNG datastreams embedded in MNG). + +Version 1.0.9beta6 [December 18, 2000] + Revised png_set_filter() to accept filter method 64 when appropriate. + Added new PNG_HAVE_PNG_SIGNATURE bit to png_ptr->mode and use it to + help prevent applications from using MNG features in PNG datastreams. + Added png_permit_mng_features() function. + Revised libpng.3/libpng.txt. Changed "filter type" to "filter method". + +Version 1.0.9rc1 [December 23, 2000] + Revised test for PNG_HAVE_PNG_SIGNATURE in pngrutil.c + Fixed error handling of unknown compression type in png_decompress_chunk(). + In pngconf.h, define __cdecl when _MSC_VER is defined. + +Version 1.0.9beta7 [December 28, 2000] + Changed PNG_TEXT_COMPRESSION_zTXt to PNG_COMPRESSION_TYPE_BASE several places. + Revised memory management in png_set_hIST and png_handle_hIST in a backward + compatible manner. PLTE and tRNS were revised similarly. + Revised the iCCP chunk reader to ignore trailing garbage. + +Version 1.0.9beta8 [January 12, 2001] + Moved pngasmrd.h into pngconf.h. + Improved handling of out-of-spec garbage iCCP chunks generated by PhotoShop. + +Version 1.0.9beta9 [January 15, 2001] + Added png_set_invalid, png_permit_mng_features, and png_mmx_supported to + wince and msvc project module definition files. + Minor revision of makefile.cygwin. + Fixed bug with progressive reading of narrow interlaced images in pngpread.c + +Version 1.0.9beta10 [January 16, 2001] + Do not typedef png_FILE_p in pngconf.h when PNG_NO_STDIO is defined. + Fixed "png_mmx_supported" typo in project definition files. + +Version 1.0.9beta11 [January 19, 2001] + Updated makefile.sgi to make shared library. + Removed png_mmx_support() function and disabled PNG_MNG_FEATURES_SUPPORTED + by default, for the benefit of DLL forward compatibility. These will + be re-enabled in version 1.2.0. + +Version 1.0.9rc2 [January 22, 2001] + Revised cygwin support. + +Version 1.0.9 [January 31, 2001] + Added check of cygwin's ALL_STATIC in pngconf.h + Added "-nommx" parameter to contrib/gregbook/rpng2-win and rpng2-x demos. + +Version 1.0.10beta1 [March 14, 2001] + Revised makefile.dec, makefile.sgi, and makefile.sggcc; added makefile.hpgcc. + Reformatted libpng.3 to eliminate bad line breaks. + Added checks for _mmx_supported in the read_filter_row function of pnggccrd.c + Added prototype for png_mmx_support() near the top of pnggccrd.c + Moved some error checking from png_handle_IHDR to png_set_IHDR. + Added PNG_NO_READ_SUPPORTED and PNG_NO_WRITE_SUPPORTED macros. + Revised png_mmx_support() function in pnggccrd.c + Restored version 1.0.8 PNG_WRITE_EMPTY_PLTE_SUPPORTED behavior in pngwutil.c + Fixed memory leak in contrib/visupng/PngFile.c + Fixed bugs in png_combine_row() in pnggccrd.c and pngvcrd.c (C version) + Added warnings when retrieving or setting gamma=0. + Increased the first part of msg buffer from 16 to 18 in png_chunk_warning(). + +Version 1.0.10rc1 [March 23, 2001] + Changed all instances of memcpy, strcpy, and strlen to png_memcpy, png_strcpy, + and png_strlen. + Revised png_mmx_supported() function in pnggccrd.c to return proper value. + Fixed bug in progressive reading (pngpread.c) with small images (height < 8). + +Version 1.0.10 [March 30, 2001] + Deleted extraneous space (introduced in 1.0.9) from line 42 of makefile.cygwin + Added beos project files (Chris Herborth) + +Version 1.0.11beta1 [April 3, 2001] + Added type casts on several png_malloc() calls (Dimitri Papadapoulos). + Removed a no-longer needed AIX work-around from pngconf.h + Changed several "//" single-line comments to C-style in pnggccrd.c + +Version 1.0.11beta2 [April 11, 2001] + Removed PNGAPI from several functions whose prototypes did not have PNGAPI. + Updated scripts/pngos2.def + +Version 1.0.11beta3 [April 14, 2001] + Added checking the results of many instances of png_malloc() for NULL + +Version 1.0.11beta4 [April 20, 2001] + Undid the changes from version 1.0.11beta3. Added a check for NULL return + from user's malloc_fn(). + Removed some useless type casts of the NULL pointer. + Added makefile.netbsd + +Version 1.0.11 [April 27, 2001] + Revised makefile.netbsd + +Version 1.0.12beta1 [May 14, 2001] + Test for Windows platform in pngconf.h when including malloc.h (Emmanuel Blot) + Updated makefile.cygwin and handling of Cygwin's ALL_STATIC in pngconf.h + Added some never-to-be-executed code in pnggccrd.c to quiet compiler warnings. + Eliminated the png_error about apps using png_read|write_init(). Instead, + libpng will reallocate the png_struct and info_struct if they are too small. + This retains future binary compatibility for old applications written for + libpng-0.88 and earlier. + +Version 1.2.0beta1 [May 6, 2001] + Bumped DLLNUM to 2. + Re-enabled PNG_MNG_FEATURES_SUPPORTED and enabled PNG_ASSEMBLER_CODE_SUPPORTED + by default. + Added runtime selection of MMX features. + Added png_set_strip_error_numbers function and related macros. + +Version 1.2.0beta2 [May 7, 2001] + Finished merging 1.2.0beta1 with version 1.0.11 + Added a check for attempts to read or write PLTE in grayscale PNG datastreams. + +Version 1.2.0beta3 [May 17, 2001] + Enabled user memory function by default. + Modified png_create_struct so it passes user mem_ptr to user memory allocator. + Increased png_mng_features flag from png_byte to png_uint_32. + Bumped shared-library (so-number) and dll-number to 3. + +Version 1.2.0beta4 [June 23, 2001] + Check for missing profile length field in iCCP chunk and free chunk_data + in case of truncated iCCP chunk. + Bumped shared-library number to 3 in makefile.sgi and makefile.sggcc + Bumped dll-number from 2 to 3 in makefile.cygwin + Revised contrib/gregbook/rpng*-x.c to avoid a memory leak and to exit cleanly + if user attempts to run it on an 8-bit display. + Updated contrib/gregbook + Use png_malloc instead of png_zalloc to allocate palette in pngset.c + Updated makefile.ibmc + Added some typecasts to eliminate gcc 3.0 warnings. Changed prototypes + of png_write_oFFS width and height from png_uint_32 to png_int_32. + Updated example.c + Revised prototypes for png_debug_malloc and png_debug_free in pngtest.c + +Version 1.2.0beta5 [August 8, 2001] + Revised contrib/gregbook + Revised makefile.gcmmx + Revised pnggccrd.c to conditionally compile some thread-unsafe code only + when PNG_THREAD_UNSAFE_OK is defined. + Added tests to prevent pngwutil.c from writing a bKGD or tRNS chunk with + value exceeding 2^bit_depth-1 + Revised makefile.sgi and makefile.sggcc + Replaced calls to fprintf(stderr,...) with png_warning() in pnggccrd.c + Removed restriction that do_invert_mono only operate on 1-bit opaque files + +Version 1.2.0 [September 1, 2001] + Changed a png_warning() to png_debug() in pnggccrd.c + Fixed contrib/gregbook/rpng-x.c, rpng2-x.c to avoid crash with XFreeGC(). + +Version 1.2.1beta1 [October 19, 2001] + Revised makefile.std in contrib/pngminus + Include background_1 in png_struct regardless of gamma support. + Revised makefile.netbsd and makefile.macosx, added makefile.darwin. + Revised example.c to provide more details about using row_callback(). + +Version 1.2.1beta2 [October 25, 2001] + Added type cast to each NULL appearing in a function call, except for + WINCE functions. + Added makefile.so9. + +Version 1.2.1beta3 [October 27, 2001] + Removed type casts from all NULLs. + Simplified png_create_struct_2(). + +Version 1.2.1beta4 [November 7, 2001] + Revised png_create_info_struct() and png_creat_struct_2(). + Added error message if png_write_info() was omitted. + Type cast NULLs appearing in function calls when _NO_PROTO or + PNG_TYPECAST_NULL is defined. + +Version 1.2.1rc1 [November 24, 2001] + Type cast NULLs appearing in function calls except when PNG_NO_TYPECAST_NULL + is defined. + Changed typecast of "size" argument to png_size_t in pngmem.c calls to + the user malloc_fn, to agree with the prototype in png.h + Added a pop/push operation to pnggccrd.c, to preserve Eflag (Maxim Sobolev) + Updated makefile.sgi to recognize LIBPATH and INCPATH. + Updated various makefiles so "make clean" does not remove previous major + version of the shared library. + +Version 1.2.1rc2 [December 4, 2001] + Always allocate 256-entry internal palette, hist, and trans arrays, to + avoid out-of-bounds memory reference caused by invalid PNG datastreams. + Added a check for prefix_length > data_length in iCCP chunk handler. + +Version 1.2.1 [December 7, 2001] + None. + +Version 1.2.2beta1 [February 22, 2002] + Fixed a bug with reading the length of iCCP profiles (Larry Reeves). + Revised makefile.linux, makefile.gcmmx, and makefile.sgi to generate + libpng.a, libpng12.so (not libpng.so.3), and libpng12/png.h + Revised makefile.darwin to remove "-undefined suppress" option. + Added checks for gamma and chromaticity values over 21474.83, which exceed + the limit for PNG unsigned 32-bit integers when encoded. + Revised calls to png_create_read_struct() and png_create_write_struct() + for simpler debugging. + Revised png_zalloc() so zlib handles errors (uses PNG_FLAG_MALLOC_NULL_MEM_OK) + +Version 1.2.2beta2 [February 23, 2002] + Check chunk_length and idat_size for invalid (over PNG_MAX_UINT) lengths. + Check for invalid image dimensions in png_get_IHDR. + Added missing "fi;" in the install target of the SGI makefiles. + Added install-static to all makefiles that make shared libraries. + Always do gamma compensation when image is partially transparent. + +Version 1.2.2beta3 [March 7, 2002] + Compute background.gray and background_1.gray even when color_type is RGB + in case image gets reduced to gray later. + Modified shared-library makefiles to install pkgconfig/libpngNN.pc. + Export (with PNGAPI) png_zalloc, png_zfree, and png_handle_as_unknown + Removed unused png_write_destroy_info prototype from png.h + Eliminated incorrect use of width_mmx from pnggccrd.c in pixel_bytes == 8 case + Added install-shared target to all makefiles that make shared libraries. + Stopped a double free of palette, hist, and trans when not using free_me. + Added makefile.32sunu for Sun Ultra 32 and makefile.64sunu for Sun Ultra 64. + +Version 1.2.2beta4 [March 8, 2002] + Compute background.gray and background_1.gray even when color_type is RGB + in case image gets reduced to gray later (Jason Summers). + Relocated a misplaced /bin/rm in the "install-shared" makefile targets + Added PNG_1_0_X macro which can be used to build a 1.0.x-compatible library. + +Version 1.2.2beta5 [March 26, 2002] + Added missing PNGAPI to several function definitions. + Check for invalid bit_depth or color_type in png_get_IHDR(), and + check for missing PLTE or IHDR in png_push_read_chunk() (Matthias Clasen). + Revised iTXt support to accept NULL for lang and lang_key. + Compute gamma for color components of background even when color_type is gray. + Changed "()" to "{}" in scripts/libpng.pc.in. + Revised makefiles to put png.h and pngconf.h only in $prefix/include/libpngNN + Revised makefiles to make symlink to libpng.so.NN in addition to libpngNN.so + +Version 1.2.2beta6 [March 31, 2002] + +Version 1.0.13beta1 [March 31, 2002] + Prevent png_zalloc() from trying to memset memory that it failed to acquire. + Add typecasts of PNG_MAX_UINT in pngset_cHRM_fixed() (Matt Holgate). + Ensure that the right function (user or default) is used to free the + png_struct after an error in png_create_read_struct_2(). + +Version 1.2.2rc1 [April 7, 2002] + +Version 1.0.13rc1 [April 7, 2002] + Save the ebx register in pnggccrd.c (Sami Farin) + Add "mem_ptr = png_ptr->mem_ptr" in png_destroy_write_struct() (Paul Gardner). + Updated makefiles to put headers in include/libpng and remove old include/*.h. + +Version 1.2.2 [April 15, 2002] + +Version 1.0.13 [April 15, 2002] + Revised description of png_set_filter() in libpng.3/libpng.txt. + Revised makefile.netbsd and added makefile.neNNbsd and makefile.freebsd + +Version 1.0.13patch01 [April 17, 2002] + +Version 1.2.2patch01 [April 17, 2002] + Changed ${PNGMAJ}.${PNGVER} bug to ${PNGVER} in makefile.sgi and + makefile.sggcc + Fixed VER -> PNGVER typo in makefile.macosx and added install-static to + install + Added install: target to makefile.32sunu and makefile.64sunu + +Version 1.0.13patch03 [April 18, 2002] + +Version 1.2.2patch03 [April 18, 2002] + Revised 15 makefiles to link libpng.a to libpngNN.a and the include libpng + subdirectory to libpngNN subdirectory without the full pathname. + Moved generation of libpng.pc from "install" to "all" in 15 makefiles. + +Version 1.2.3rc1 [April 28, 2002] + Added install-man target to 15 makefiles (Dimitri Papadopolous-Orfanos). + Added $(DESTDIR) feature to 24 makefiles (Tim Mooney) + Fixed bug with $prefix, should be $(prefix) in makefile.hpux. + Updated cygwin-specific portion of pngconf.h and revised makefile.cygwin + Added a link from libpngNN.pc to libpng.pc in 15 makefiles. + Added links from include/libpngNN/*.h to include/*.h in 24 makefiles. + Revised makefile.darwin to make relative links without full pathname. + Added setjmp() at the end of png_create_*_struct_2() in case user forgets + to put one in their application. + Restored png_zalloc() and png_zfree() prototypes to version 1.2.1 and + removed them from module definition files. + +Version 1.2.3rc2 [May 1, 2002] + Fixed bug in reporting number of channels in pngget.c and pngset.c, + that was introduced in version 1.2.2beta5. + Exported png_zalloc(), png_zfree(), png_default_read(), png_default_write(), + png_default_flush(), and png_push_fill_buffer() and included them in + module definition files. + Added "libpng.pc" dependency to the "install-shared" target in 15 makefiles. + +Version 1.2.3rc3 [May 1, 2002] + Revised prototype for png_default_flush() + Remove old libpng.pc and libpngNN.pc before installing new ones. + +Version 1.2.3rc4 [May 2, 2002] + Typos in *.def files (png_default_read|write -> png_default_read|write_data) + In makefiles, changed rm libpng.NN.pc to rm libpngNN.pc + Added libpng-config and libpngNN-config and modified makefiles to install + them. + Changed $(MANPATH) to $(DESTDIR)$(MANPATH) in makefiles + Added "Win32 DLL VB" configuration to projects/msvc/libpng.dsp + +Version 1.2.3rc5 [May 11, 2002] + Changed "error" and "message" in prototypes to "error_message" and + "warning_message" to avoid namespace conflict. + Revised 15 makefiles to build libpng-config from libpng-config-*.in + Once more restored png_zalloc and png_zfree to regular nonexported form. + Restored png_default_read|write_data, png_default_flush, png_read_fill_buffer + to nonexported form, but with PNGAPI, and removed them from module def + files. + +Version 1.2.3rc6 [May 14, 2002] + Removed "PNGAPI" from png_zalloc() and png_zfree() in png.c + Changed "Gz" to "Gd" in projects/msvc/libpng.dsp and zlib.dsp. + Removed leftover libpng-config "sed" script from four makefiles. + Revised libpng-config creating script in 16 makefiles. + +Version 1.2.3 [May 22, 2002] + Revised libpng-config target in makefile.cygwin. + Removed description of png_set_mem_fn() from documentation. + Revised makefile.freebsd. + Minor cosmetic changes to 15 makefiles, e.g., $(DI) = $(DESTDIR)/$(INCDIR). + Revised projects/msvc/README.txt + Changed -lpng to -lpngNN in LDFLAGS in several makefiles. + +Version 1.2.4beta1 [May 24, 2002] + Added libpng.pc and libpng-config to "all:" target in 16 makefiles. + Fixed bug in 16 makefiles: $(DESTDIR)/$(LIBPATH) to $(DESTDIR)$(LIBPATH) + Added missing "\" before closing double quote in makefile.gcmmx. + Plugged various memory leaks; added png_malloc_warn() and png_set_text_2() + functions. + +Version 1.2.4beta2 [June 25, 2002] + Plugged memory leak of png_ptr->current_text (Matt Holgate). + Check for buffer overflow before reading CRC in pngpread.c (Warwick Allison) + Added -soname to the loader flags in makefile.dec, makefile.sgi, and + makefile.sggcc. + Added "test-installed" target to makefile.linux, makefile.gcmmx, + makefile.sgi, and makefile.sggcc. + +Version 1.2.4beta3 [June 28, 2002] + Plugged memory leak of row_buf in pngtest.c when there is a png_error(). + Detect buffer overflow in pngpread.c when IDAT is corrupted with extra data. + Added "test-installed" target to makefile.32sunu, makefile.64sunu, + makefile.beos, makefile.darwin, makefile.dec, makefile.macosx, + makefile.solaris, makefile.hpux, makefile.hpgcc, and makefile.so9. + +Version 1.2.4rc1 and 1.0.14rc1 [July 2, 2002] + Added "test-installed" target to makefile.cygwin and makefile.sco. + Revised pnggccrd.c to be able to back out version 1.0.x via PNG_1_0_X macro. + +Version 1.2.4 and 1.0.14 [July 8, 2002] + Changed png_warning() to png_error() when width is too large to process. + +Version 1.2.4patch01 [July 20, 2002] + Revised makefile.cygwin to use DLL number 12 instead of 13. + +Version 1.2.5beta1 [August 6, 2002] + Added code to contrib/gregbook/readpng2.c to ignore unused chunks. + Replaced toucan.png in contrib/gregbook (it has been corrupt since 1.0.11) + Removed some stray *.o files from contrib/gregbook. + Changed png_error() to png_warning() about "Too much data" in pngpread.c + and about "Extra compressed data" in pngrutil.c. + Prevent png_ptr->pass from exceeding 7 in png_push_finish_row(). + Updated makefile.hpgcc + Updated png.c and pnggccrd.c handling of return from png_mmx_support() + +Version 1.2.5beta2 [August 15, 2002] + Only issue png_warning() about "Too much data" in pngpread.c when avail_in + is nonzero. + Updated makefiles to install a separate libpng.so.3 with its own rpath. + +Version 1.2.5rc1 and 1.0.15rc1 [August 24, 2002] + Revised makefiles to not remove previous minor versions of shared libraries. + +Version 1.2.5rc2 and 1.0.15rc2 [September 16, 2002] + Revised 13 makefiles to remove "-lz" and "-L$(ZLIBLIB)", etc., from shared + library loader directive. + Added missing "$OBJSDLL" line to makefile.gcmmx. + Added missing "; fi" to makefile.32sunu. + +Version 1.2.5rc3 and 1.0.15rc3 [September 18, 2002] + Revised libpng-config script. + +Version 1.2.5 and 1.0.15 [October 3, 2002] + Revised makefile.macosx, makefile.darwin, makefile.hpgcc, and makefile.hpux, + and makefile.aix. + Relocated two misplaced PNGAPI lines in pngtest.c + +Version 1.2.6beta1 [October 22, 2002] + Commented out warning about uninitialized mmx_support in pnggccrd.c. + Changed "IBMCPP__" flag to "__IBMCPP__" in pngconf.h. + Relocated two more misplaced PNGAPI lines in pngtest.c + Fixed memory overrun bug in png_do_read_filler() with 16-bit datastreams, + introduced in version 1.0.2. + Revised makefile.macosx, makefile.dec, makefile.aix, and makefile.32sunu. + +Version 1.2.6beta2 [November 1, 2002] + Added libpng-config "--ldopts" output. + Added "AR=ar" and "ARFLAGS=rc" and changed "ar rc" to "$(AR) $(ARFLAGS)" + in makefiles. + +Version 1.2.6beta3 [July 18, 2004] + Reverted makefile changes from version 1.2.6beta2 and some of the changes + from version 1.2.6beta1; these will be postponed until version 1.2.7. + Version 1.2.6 is going to be a simple bugfix release. + Changed the one instance of "ln -sf" to "ln -f -s" in each Sun makefile. + Fixed potential overrun in pngerror.c by using strncpy instead of memcpy. + Added "#!/bin/sh" at the top of configure, for recognition of the + 'x' flag under Cygwin (Cosmin). + Optimized vacuous tests that silence compiler warnings, in png.c (Cosmin). + Added support for PNG_USER_CONFIG, in pngconf.h (Cosmin). + Fixed the special memory handler for Borland C under DOS, in pngmem.c + (Cosmin). + Removed some spurious assignments in pngrutil.c (Cosmin). + Replaced 65536 with 65536L, and 0xffff with 0xffffL, to silence warnings + on 16-bit platforms (Cosmin). + Enclosed shift op expressions in parentheses, to silence warnings (Cosmin). + Used proper type png_fixed_point, to avoid problems on 16-bit platforms, + in png_handle_sRGB() (Cosmin). + Added compression_type to png_struct, and optimized the window size + inside the deflate stream (Cosmin). + Fixed definition of isnonalpha(), in pngerror.c and pngrutil.c (Cosmin). + Fixed handling of unknown chunks that come after IDAT (Cosmin). + Allowed png_error() and png_warning() to work even if png_ptr == NULL + (Cosmin). + Replaced row_info->rowbytes with row_bytes in png_write_find_filter() + (Cosmin). + Fixed definition of PNG_LIBPNG_VER_DLLNUM (Simon-Pierre). + Used PNG_LIBPNG_VER and PNG_LIBPNG_VER_STRING instead of the hardcoded + values in png.c (Simon-Pierre, Cosmin). + Initialized png_libpng_ver[] with PNG_LIBPNG_VER_STRING (Simon-Pierre). + Replaced PNG_LIBPNG_VER_MAJOR with PNG_LIBPNG_VER_DLLNUM in png.rc + (Simon-Pierre). + Moved the definition of PNG_HEADER_VERSION_STRING near the definitions + of the other PNG_LIBPNG_VER_... symbols in png.h (Cosmin). + Relocated #ifndef PNGAPI guards in pngconf.h (Simon-Pierre, Cosmin). + Updated scripts/makefile.vc(a)win32 (Cosmin). + Updated the MSVC project (Simon-Pierre, Cosmin). + Updated the Borland C++ Builder project (Cosmin). + Avoided access to asm_flags in pngvcrd.c, if PNG_1_0_X is defined (Cosmin). + Commented out warning about uninitialized mmx_support in pngvcrd.c (Cosmin). + Removed scripts/makefile.bd32 and scripts/pngdef.pas (Cosmin). + Added extra guard around inclusion of Turbo C memory headers, in pngconf.h + (Cosmin). + Renamed projects/msvc/ to projects/visualc6/, and projects/borland/ to + projects/cbuilder5/ (Cosmin). + Moved projects/visualc6/png32ms.def to scripts/pngw32.def, + and projects/visualc6/png.rc to scripts/pngw32.rc (Cosmin). + Added projects/visualc6/pngtest.dsp; removed contrib/msvctest/ (Cosmin). + Changed line endings to DOS style in cbuilder5 and visualc6 files, even + in the tar.* distributions (Cosmin). + Updated contrib/visupng/VisualPng.dsp (Cosmin). + Updated contrib/visupng/cexcept.h to version 2.0.0 (Cosmin). + Added a separate distribution with "configure" and supporting files (Junichi). + +Version 1.2.6beta4 [July 28, 2004] + Added user ability to change png_size_t via a PNG_SIZE_T macro. + Added png_sizeof() and png_convert_size() functions. + Added PNG_SIZE_MAX (maximum value of a png_size_t variable. + Added check in png_malloc_default() for (size_t)size != (png_uint_32)size + which would indicate an overflow. + Changed sPLT failure action from png_error to png_warning and abandon chunk. + Changed sCAL and iCCP failures from png_error to png_warning and abandon. + Added png_get_uint_31(png_ptr, buf) function. + Added PNG_UINT_32_MAX macro. + Renamed PNG_MAX_UINT to PNG_UINT_31_MAX. + Made png_zalloc() issue a png_warning and return NULL on potential + overflow. + Turn on PNG_NO_ZALLOC_ZERO by default in version 1.2.x + Revised "clobber list" in pnggccrd.c so it will compile under gcc-3.4. + Revised Borland portion of png_malloc() to return NULL or issue + png_error() according to setting of PNG_FLAG_MALLOC_NULL_MEM_OK. + Added PNG_NO_SEQUENTIAL_READ_SUPPORTED macro to conditionally remove + sequential read support. + Added some "#if PNG_WRITE_SUPPORTED" blocks. + Added #ifdef to remove some redundancy in png_malloc_default(). + Use png_malloc instead of png_zalloc to allocate the pallete. + +Version 1.0.16rc1 and 1.2.6rc1 [August 4, 2004] + Fixed buffer overflow vulnerability in png_handle_tRNS() + Fixed integer arithmetic overflow vulnerability in png_read_png(). + Fixed some harmless bugs in png_handle_sBIT, etc, that would cause + duplicate chunk types to go undetected. + Fixed some timestamps in the -config version + Rearranged order of processing of color types in png_handle_tRNS(). + Added ROWBYTES macro to calculate rowbytes without integer overflow. + Updated makefile.darwin and removed makefile.macosx from scripts directory. + Imposed default one million column, one-million row limits on the image + dimensions, and added png_set_user_limits() function to override them. + Revised use of PNG_SET_USER_LIMITS_SUPPORTED macro. + Fixed wrong cast of returns from png_get_user_width|height_max(). + Changed some "keep the compiler happy" from empty statements to returns, + Revised libpng.txt to remove 1.2.x stuff from the 1.0.x distribution + +Version 1.0.16rc2 and 1.2.6rc2 [August 7, 2004] + Revised makefile.darwin and makefile.solaris. Removed makefile.macosx. + Revised pngtest's png_debug_malloc() to use png_malloc() instead of + png_malloc_default() which is not supposed to be exported. + Fixed off-by-one error in one of the conversions to PNG_ROWBYTES() in + pngpread.c. Bug was introduced in 1.2.6rc1. + Fixed bug in RGB to RGBX transformation introduced in 1.2.6rc1. + Fixed old bug in RGB to Gray transformation. + Fixed problem with 64-bit compilers by casting arguments to abs() + to png_int_32. + Changed "ln -sf" to "ln -f -s" in three makefiles (solaris, sco, so9). + Changed "HANDLE_CHUNK_*" to "PNG_HANDLE_CHUNK_*" (Cosmin) + Added "-@/bin/rm -f $(DL)/$(LIBNAME).so.$(PNGMAJ)" to 15 *NIX makefiles. + Added code to update the row_info->colortype in png_do_read_filler() (MSB). + +Version 1.0.16rc3 and 1.2.6rc3 [August 9, 2004] + Eliminated use of "abs()" in testing cHRM and gAMA values, to avoid + trouble with some 64-bit compilers. Created PNG_OUT_OF_RANGE() macro. + Revised documentation of png_set_keep_unknown_chunks(). + Check handle_as_unknown status in pngpread.c, as in pngread.c previously. + Moved "PNG_HANDLE_CHUNK_*" macros out of PNG_INTERNAL section of png.h + Added "rim" definitions for CONST4 and CONST6 in pnggccrd.c + +Version 1.0.16rc4 and 1.2.6rc4 [August 10, 2004] + Fixed mistake in pngtest.c introduced in 1.2.6rc2 (declaration of + "pinfo" was out of place). + +Version 1.0.16rc5 and 1.2.6rc5 [August 10, 2004] + Moved "PNG_HANDLE_CHUNK_*" macros out of PNG_ASSEMBLER_CODE_SUPPORTED + section of png.h where they were inadvertently placed in version rc3. + +Version 1.2.6 and 1.0.16 [August 15, 2004] + Revised pngtest so memory allocation testing is only done when PNG_DEBUG==1. + +Version 1.2.7beta1 [August 26, 2004] + Removed unused pngasmrd.h file. + Removed references to uu.net for archived files. Added references to + PNG Spec (second edition) and the PNG ISO/IEC Standard. + Added "test-dd" target in 15 makefiles, to run pngtest in DESTDIR. + Fixed bug with "optimized window size" in the IDAT datastream, that + causes libpng to write PNG files with incorrect zlib header bytes. + +Version 1.2.7beta2 [August 28, 2004] + Fixed bug with sCAL chunk and big-endian machines (David Munro). + Undid new code added in 1.2.6rc2 to update the color_type in + png_set_filler(). + Added png_set_add_alpha() that updates color type. + +Version 1.0.17rc1 and 1.2.7rc1 [September 4, 2004] + Revised png_set_strip_filler() to not remove alpha if color_type has alpha. + +Version 1.2.7 and 1.0.17 [September 12, 2004] + Added makefile.hp64 + Changed projects/msvc/png32ms.def to scripts/png32ms.def in makefile.cygwin + +Version 1.2.8beta1 [November 1, 2004] + Fixed bug in png_text_compress() that would fail to complete a large block. + Fixed bug, introduced in libpng-1.2.7, that overruns a buffer during + strip alpha operation in png_do_strip_filler(). + Added PNG_1_2_X definition in pngconf.h + Use #ifdef to comment out png_info_init in png.c and png_read_init in + pngread.c (as of 1.3.0) + +Version 1.2.8beta2 [November 2, 2004] + Reduce color_type to a nonalpha type after strip alpha operation in + png_do_strip_filler(). + +Version 1.2.8beta3 [November 3, 2004] + Revised definitions of PNG_MAX_UINT_32, PNG_MAX_SIZE, and PNG_MAXSUM + +Version 1.2.8beta4 [November 12, 2004] + Fixed (again) definition of PNG_LIBPNG_VER_DLLNUM in png.h (Cosmin). + Added PNG_LIBPNG_BUILD_PRIVATE in png.h (Cosmin). + Set png_ptr->zstream.data_type to Z_BINARY, to avoid unnecessary detection + of data type in deflate (Cosmin). + Deprecated but continue to support SPECIALBUILD and PRIVATEBUILD in favor of + PNG_LIBPNG_BUILD_SPECIAL_STRING and PNG_LIBPNG_BUILD_PRIVATE_STRING. + +Version 1.2.8beta5 [November 20, 2004] + Use png_ptr->flags instead of png_ptr->transformations to pass + PNG_STRIP_ALPHA info to png_do_strip_filler(), to preserve ABI + compatibility. + Revised handling of SPECIALBUILD, PRIVATEBUILD, + PNG_LIBPNG_BUILD_SPECIAL_STRING and PNG_LIBPNG_BUILD_PRIVATE_STRING. + +Version 1.2.8rc1 [November 24, 2004] + Moved handling of BUILD macros from pngconf.h to png.h + Added definition of PNG_LIBPNG_BASE_TYPE in png.h, inadvertently + omitted from beta5. + Revised scripts/pngw32.rc + Despammed mailing addresses by masking "@" with "at". + Inadvertently installed a supposedly faster test version of pngrutil.c + +Version 1.2.8rc2 [November 26, 2004] + Added two missing "\" in png.h + Change tests in pngread.c and pngpread.c to + if (png_ptr->transformations || (png_ptr->flags&PNG_FLAG_STRIP_ALPHA)) + png_do_read_transformations(png_ptr); + +Version 1.2.8rc3 [November 28, 2004] + Reverted pngrutil.c to version libpng-1.2.8beta5. + Added scripts/makefile.elf with supporting code in pngconf.h for symbol + versioning (John Bowler). + +Version 1.2.8rc4 [November 29, 2004] + Added projects/visualc7 (Simon-pierre). + +Version 1.2.8rc5 [November 29, 2004] + Fixed new typo in scripts/pngw32.rc + +Version 1.2.8 [December 3, 2004] + Removed projects/visualc7, added projects/visualc71. + +Version 1.2.9beta1 [February 21, 2006] + Initialized some structure members in pngwutil.c to avoid gcc-4.0.0 complaints + Revised man page and libpng.txt to make it clear that one should not call + png_read_end or png_write_end after png_read_png or png_write_png. + Updated references to png-mng-implement mailing list. + Fixed an incorrect typecast in pngrutil.c + Added PNG_NO_READ_SUPPORTED conditional for making a write-only library. + Added PNG_NO_WRITE_INTERLACING_SUPPORTED conditional. + Optimized alpha-inversion loops in pngwtran.c + Moved test for nonzero gamma outside of png_build_gamma_table() in pngrtran.c + Make sure num_trans is <= 256 before copying data in png_set_tRNS(). + Make sure num_palette is <= 256 before copying data in png_set_PLTE(). + Interchanged order of write_swap_alpha and write_invert_alpha transforms. + Added parentheses in the definition of PNG_LIBPNG_BUILD_TYPE (Cosmin). + Optimized zlib window flag (CINFO) in contrib/pngsuite/*.png (Cosmin). + Updated scripts/makefile.bc32 for Borland C++ 5.6 (Cosmin). + Exported png_get_uint_32, png_save_uint_32, png_get_uint_16, png_save_uint_16, + png_get_int_32, png_save_int_32, png_get_uint_31 (Cosmin). + Added type cast (png_byte) in png_write_sCAL() (Cosmin). + Fixed scripts/makefile.cygwin (Christian Biesinger, Cosmin). + Default iTXt support was inadvertently enabled. + +Version 1.2.9beta2 [February 21, 2006] + Check for png_rgb_to_gray and png_gray_to_rgb read transformations before + checking for png_read_dither in pngrtran.c + Revised checking of chromaticity limits to accommodate extended RGB + colorspace (John Denker). + Changed line endings in some of the project files to CRLF, even in the + "Unix" tar distributions (Cosmin). + Made png_get_int_32 and png_save_int_32 always available (Cosmin). + Updated scripts/pngos2.def, scripts/pngw32.def and projects/wince/png32ce.def + with the newly exported functions. + Eliminated distributions without the "configure" script. + Updated INSTALL instructions. + +Version 1.2.9beta3 [February 24, 2006] + Fixed CRCRLF line endings in contrib/visupng/VisualPng.dsp + Made libpng.pc respect EXEC_PREFIX (D. P. Kreil, J. Bowler) + Removed reference to pngasmrd.h from Makefile.am + Renamed CHANGES to ChangeLog. + Renamed LICENSE to COPYING. + Renamed ANNOUNCE to NEWS. + Created AUTHORS file. + +Version 1.2.9beta4 [March 3, 2006] + Changed definition of PKGCONFIG from $prefix/lib to $libdir in configure.ac + Reverted to filenames LICENSE and ANNOUNCE; removed AUTHORS and COPYING. + Removed newline from the end of some error and warning messages. + Removed test for sqrt() from configure.ac and configure. + Made swap tables in pngtrans.c PNG_CONST (Carlo Bramix). + Disabled default iTXt support that was inadvertently enabled in + libpng-1.2.9beta1. + Added "OS2" to list of systems that don't need underscores, in pnggccrd.c + Removed libpng version and date from *.c files. + +Version 1.2.9beta5 [March 4, 2006] + Removed trailing blanks from source files. + Put version and date of latest change in each source file, and changed + copyright year accordingly. + More cleanup of configure.ac, Makefile.am, and associated scripts. + Restored scripts/makefile.elf which was inadvertently deleted. + +Version 1.2.9beta6 [March 6, 2006] + Fixed typo (RELEASE) in configuration files. + +Version 1.2.9beta7 [March 7, 2006] + Removed libpng.vers and libpng.sym from libpng12_la_SOURCES in Makefile.am + Fixed inconsistent #ifdef's around png_sig_bytes() and png_set_sCAL_s() + in png.h. + Updated makefile.elf as suggested by debian. + Made cosmetic changes to some makefiles, adding LN_SF and other macros. + Made some makefiles accept "exec_prefix". + +Version 1.2.9beta8 [March 9, 2006] + Fixed some "#if defined (..." which should be "#if defined(..." + Bug introduced in libpng-1.2.8. + Fixed inconsistency in definition of png_default_read_data() + Restored blank that was lost from makefile.sggcc "clean" target in beta7. + Revised calculation of "current" and "major" for irix in ltmain.sh + Changed "mkdir" to "MKDIR_P" in some makefiles. + Separated PNG_EXPAND and PNG_EXPAND_tRNS. + Added png_set_expand_gray_1_2_4_to_8() and deprecated + png_set_gray_1_2_4_to_8() which also expands tRNS to alpha. + +Version 1.2.9beta9 [March 10, 2006] + Include "config.h" in pngconf.h when available. + Added some checks for NULL png_ptr or NULL info_ptr (timeless) + +Version 1.2.9beta10 [March 20, 2006] + Removed extra CR from contrib/visualpng/VisualPng.dsw (Cosmin) + Made pnggccrd.c PIC-compliant (Christian Aichinger). + Added makefile.mingw (Wolfgang Glas). + Revised pngconf.h MMX checking. + +Version 1.2.9beta11 [March 22, 2006] + Fixed out-of-order declaration in pngwrite.c that was introduced in beta9 + Simplified some makefiles by using LIBSO, LIBSOMAJ, and LIBSOVER macros. + +Version 1.2.9rc1 [March 31, 2006] + Defined PNG_USER_PRIVATEBUILD when including "pngusr.h" (Cosmin). + Removed nonsensical assertion check from pngtest.c (Cosmin). + +Version 1.2.9 [April 14, 2006] + Revised makefile.beos and added "none" selector in ltmain.sh + +Version 1.2.10beta1 [April 15, 2006] + Renamed "config.h" to "png_conf.h" and revised Makefile.am to add + -DPNG_BUILDING_LIBPNG to compile directive, and modified pngconf.h + to include png_conf.h only when PNG_BUILDING_LIBPNG is defined. + +Version 1.2.10beta2 [April 15, 2006] + Manually updated Makefile.in and configure. Changed png_conf.h.in + back to config.h. + +Version 1.2.10beta3 [April 15, 2006] + Change png_conf.h back to config.h in pngconf.h. + +Version 1.2.10beta4 [April 16, 2006] + Change PNG_BUILDING_LIBPNG to PNG_CONFIGURE_LIBPNG in config/Makefile*. + +Version 1.2.10beta5 [April 16, 2006] + Added a configure check for compiling assembler code in pnggccrd.c + +Version 1.2.10beta6 [April 17, 2006] + Revised the configure check for pnggccrd.c + Moved -DPNG_CONFIGURE_LIBPNG into @LIBPNG_DEFINES@ + Added @LIBPNG_DEFINES@ to arguments when building libpng.sym + +Version 1.2.10beta7 [April 18, 2006] + Change "exec_prefix=$prefix" to "exec_prefix=$(prefix)" in makefiles. + +Version 1.2.10rc1 [April 19, 2006] + Ensure pngconf.h doesn't define both PNG_USE_PNGGCCRD and PNG_USE_PNGVCRD + Fixed "LN_FS" typo in makefile.sco and makefile.solaris. + +Version 1.2.10rc2 [April 20, 2006] + Added a backslash between -DPNG_CONFIGURE_LIBPNG and -DPNG_NO_ASSEMBLER_CODE + in configure.ac and configure + Made the configure warning about versioned symbols less arrogant. + +Version 1.2.10rc3 [April 21, 2006] + Added a note in libpng.txt that png_set_sig_bytes(8) can be used when + writing an embedded PNG without the 8-byte signature. + Revised makefiles and configure to avoid making links to libpng.so.* + +Version 1.2.10 [April 23, 2006] + Reverted configure to "rc2" state. + +Version 1.2.11beta1 [May 31, 2006] + scripts/libpng.pc.in contained "configure" style version info and would + not work with makefiles. + The shared-library makefiles were linking to libpng.so.0 instead of + libpng.so.3 compatibility as the library. + +Version 1.2.11beta2 [June 2, 2006] + Increased sprintf buffer from 50 to 52 chars in pngrutil.c to avoid + buffer overflow. + Fixed bug in example.c (png_set_palette_rgb -> png_set_palette_to_rgb) + +Version 1.2.11beta3 [June 5, 2006] + Prepended "#! /bin/sh" to ltmail.sh and contrib/pngminus/*.sh (Cosmin). + Removed the accidental leftover Makefile.in~ (Cosmin). + Avoided potential buffer overflow and optimized buffer in + png_write_sCAL(), png_write_sCAL_s() (Cosmin). + Removed the include directories and libraries from CFLAGS and LDFLAGS + in scripts/makefile.gcc (Nelson A. de Oliveira, Cosmin). + +Version 1.2.11beta4 [June 6, 2006] + Allow zero-length IDAT chunks after the entire zlib datastream, but not + after another intervening chunk type. + +Version 1.0.19rc1, 1.2.11rc1 [June 13, 2006] + Deleted extraneous square brackets from [config.h] in configure.ac + +Version 1.0.19rc2, 1.2.11rc2 [June 14, 2006] + Added prototypes for PNG_INCH_CONVERSIONS functions to png.h + Revised INSTALL and autogen.sh + Fixed typo in several makefiles (-W1 should be -Wl) + Added typedef for png_int_32 and png_uint_32 on 64-bit systems. + +Version 1.0.19rc3, 1.2.11rc3 [June 15, 2006] + Removed the new typedefs for 64-bit systems (delay until version 1.4.0) + Added one zero element to png_gamma_shift[] array in pngrtran.c to avoid + reading out of bounds. + +Version 1.0.19rc4, 1.2.11rc4 [June 15, 2006] + Really removed the new typedefs for 64-bit systems. + +Version 1.0.19rc5, 1.2.11rc5 [June 22, 2006] + Removed png_sig_bytes entry from scripts/pngw32.def + +Version 1.0.19, 1.2.11 [June 26, 2006] + None. + +Version 1.0.20, 1.2.12 [June 27, 2006] + Really increased sprintf buffer from 50 to 52 chars in pngrutil.c to avoid + buffer overflow. + +Version 1.2.13beta1 [October 2, 2006] + Removed AC_FUNC_MALLOC from configure.ac + Work around Intel-Mac compiler bug by setting PNG_NO_MMX_CODE in pngconf.h + Change "logical" to "bitwise" throughout documentation. + Detect and fix attempt to write wrong iCCP profile length (CVE-2006-7244) + +Version 1.0.21, 1.2.13 [November 14, 2006] + Fix potential buffer overflow in sPLT chunk handler. + Fix Makefile.am to not try to link to noexistent files. + Check all exported functions for NULL png_ptr. + +Version 1.2.14beta1 [November 17, 2006] + Relocated three misplaced tests for NULL png_ptr. + Built Makefile.in with automake-1.9.6 instead of 1.9.2. + Build configure with autoconf-2.60 instead of 2.59 + +Version 1.2.14beta2 [November 17, 2006] + Added some typecasts in png_zalloc(). + +Version 1.2.14rc1 [November 20, 2006] + Changed "strtod" to "png_strtod" in pngrutil.c + +Version 1.0.22, 1.2.14 [November 27, 2006] + Added missing "$(srcdir)" in Makefile.am and Makefile.in + +Version 1.2.15beta1 [December 3, 2006] + Generated configure with autoconf-2.61 instead of 2.60 + Revised configure.ac to update libpng.pc and libpng-config. + +Version 1.2.15beta2 [December 3, 2006] + Always export MMX asm functions, just stubs if not building pnggccrd.c + +Version 1.2.15beta3 [December 4, 2006] + Add "png_bytep" typecast to profile while calculating length in pngwutil.c + +Version 1.2.15beta4 [December 7, 2006] + Added scripts/CMakeLists.txt + Changed PNG_NO_ASSEMBLER_CODE to PNG_NO_MMX_CODE in scripts, like 1.4.0beta + +Version 1.2.15beta5 [December 7, 2006] + Changed some instances of PNG_ASSEMBLER_* to PNG_MMX_* in pnggccrd.c + Revised scripts/CMakeLists.txt + +Version 1.2.15beta6 [December 13, 2006] + Revised scripts/CMakeLists.txt and configure.ac + +Version 1.2.15rc1 [December 18, 2006] + Revised scripts/CMakeLists.txt + +Version 1.2.15rc2 [December 21, 2006] + Added conditional #undef jmpbuf in pngtest.c to undo #define in AIX headers. + Added scripts/makefile.nommx + +Version 1.2.15rc3 [December 25, 2006] + Fixed shared library numbering error that was introduced in 1.2.15beta6. + +Version 1.2.15rc4 [December 27, 2006] + Fixed handling of rgb_to_gray when png_ptr->color.gray isn't set. + +Version 1.2.15rc5 [December 31, 2006] + Revised handling of rgb_to_gray. + +Version 1.2.15 [January 5, 2007] + Added some (unsigned long) typecasts in pngtest.c to avoid printing errors. + +Version 1.2.16beta1 [January 6, 2007] + Fix bugs in makefile.nommx + +Version 1.2.16beta2 [January 16, 2007] + Revised scripts/CMakeLists.txt + +Version 1.2.16 [January 31, 2007] + No changes. + +Version 1.2.17beta1 [March 6, 2007] + Revised scripts/CMakeLists.txt to install both shared and static libraries. + Deleted a redundant line from pngset.c. + +Version 1.2.17beta2 [April 26, 2007] + Relocated misplaced test for png_ptr == NULL in pngpread.c + Change "==" to "&" for testing PNG_RGB_TO_GRAY_ERR & PNG_RGB_TO_GRAY_WARN + flags. + Changed remaining instances of PNG_ASSEMBLER_* to PNG_MMX_* + Added pngerror() when write_IHDR fails in deflateInit2(). + Added "const" to some array declarations. + Mention examples of libpng usage in the libpng*.txt and libpng.3 documents. + +Version 1.2.17rc1 [May 4, 2007] + No changes. + +Version 1.2.17rc2 [May 8, 2007] + Moved several PNG_HAVE_* macros out of PNG_INTERNAL because applications + calling set_unknown_chunk_location() need them. + Changed transformation flag from PNG_EXPAND_tRNS to PNG_EXPAND in + png_set_expand_gray_1_2_4_to_8(). + Added png_ptr->unknown_chunk to hold working unknown chunk data, so it + can be free'ed in case of error. Revised unknown chunk handling in + pngrutil.c and pngpread.c to use this structure. + +Version 1.2.17rc3 [May 8, 2007] + Revised symbol-handling in configure script. + +Version 1.2.17rc4 [May 10, 2007] + Revised unknown chunk handling to avoid storing unknown critical chunks. + +Version 1.0.25 [May 15, 2007] +Version 1.2.17 [May 15, 2007] + Added "png_ptr->num_trans=0" before error return in png_handle_tRNS, + to eliminate a vulnerability (CVE-2007-2445, CERT VU#684664) + +Version 1.0.26 [May 15, 2007] +Version 1.2.18 [May 15, 2007] + Reverted the libpng-1.2.17rc3 change to symbol-handling in configure script + +Version 1.2.19beta1 [May 18, 2007] + Changed "const static" to "static PNG_CONST" everywhere, mostly undoing + change of libpng-1.2.17beta2. Changed other "const" to "PNG_CONST" + Changed some handling of unused parameters, to avoid compiler warnings. + "if (unused == NULL) return;" becomes "unused = unused". + +Version 1.2.19beta2 [May 18, 2007] + Only use the valid bits of tRNS value in png_do_expand() (Brian Cartier) + +Version 1.2.19beta3 [May 19, 2007] + Add some "png_byte" typecasts in png_check_keyword() and write new_key + instead of key in zTXt chunk (Kevin Ryde). + +Version 1.2.19beta4 [May 21, 2007] + Add png_snprintf() function and use it in place of sprint() for improved + defense against buffer overflows. + +Version 1.2.19beta5 [May 21, 2007] + Fixed png_handle_tRNS() to only use the valid bits of tRNS value. + Changed handling of more unused parameters, to avoid compiler warnings. + Removed some PNG_CONST in pngwutil.c to avoid compiler warnings. + +Version 1.2.19beta6 [May 22, 2007] + Added some #ifdef PNG_MMX_CODE_SUPPORTED where needed in pngvcrd.c + Added a special "_MSC_VER" case that defines png_snprintf to _snprintf + +Version 1.2.19beta7 [May 22, 2007] + Squelched png_squelch_warnings() in pnggccrd.c and added + an #ifdef PNG_MMX_CODE_SUPPORTED block around the declarations that caused + the warnings that png_squelch_warnings was squelching. + +Version 1.2.19beta8 [May 22, 2007] + Removed __MMX__ from test in pngconf.h. + +Version 1.2.19beta9 [May 23, 2007] + Made png_squelch_warnings() available via PNG_SQUELCH_WARNINGS macro. + Revised png_squelch_warnings() so it might work. + Updated makefile.sgcc and makefile.solaris; added makefile.solaris-x86. + +Version 1.2.19beta10 [May 24, 2007] + Resquelched png_squelch_warnings(), use "__attribute__((used))" instead. + +Version 1.4.0beta1 [April 20, 2006] + Enabled iTXt support (changes png_struct, thus requires so-number change). + Cleaned up PNG_ASSEMBLER_CODE_SUPPORTED vs PNG_MMX_CODE_SUPPORTED + Eliminated PNG_1_0_X and PNG_1_2_X macros. + Removed deprecated functions png_read_init, png_write_init, png_info_init, + png_permit_empty_plte, png_set_gray_1_2_4_to_8, png_check_sig, and + removed the deprecated macro PNG_MAX_UINT. + Moved "PNG_INTERNAL" parts of png.h and pngconf.h into pngintrn.h + Removed many WIN32_WCE #ifdefs (Cosmin). + Reduced dependency on C-runtime library when on Windows (Simon-Pierre) + Replaced sprintf() with png_sprintf() (Simon-Pierre) + +Version 1.4.0beta2 [April 20, 2006] + Revised makefiles and configure to avoid making links to libpng.so.* + Moved some leftover MMX-related defines from pngconf.h to pngintrn.h + Updated scripts/pngos2.def, pngw32.def, and projects/wince/png32ce.def + +Version 1.4.0beta3 [May 10, 2006] + Updated scripts/pngw32.def to comment out MMX functions. + Added PNG_NO_GET_INT_32 and PNG_NO_SAVE_INT_32 macros. + Scripts/libpng.pc.in contained "configure" style version info and would + not work with makefiles. + Revised pngconf.h and added pngconf.h.in, so makefiles and configure can + pass defines to libpng and applications. + +Version 1.4.0beta4 [May 11, 2006] + Revised configure.ac, Makefile.am, and many of the makefiles to write + their defines in pngconf.h. + +Version 1.4.0beta5 [May 15, 2006] + Added a missing semicolon in Makefile.am and Makefile.in + Deleted extraneous square brackets from configure.ac + +Version 1.4.0beta6 [June 2, 2006] + Increased sprintf buffer from 50 to 52 chars in pngrutil.c to avoid + buffer overflow. + Changed sonum from 0 to 1. + Removed unused prototype for png_check_sig() from png.h + +Version 1.4.0beta7 [June 16, 2006] + Exported png_write_sig (Cosmin). + Optimized buffer in png_handle_cHRM() (Cosmin). + Set pHYs = 2835 x 2835 pixels per meter, and added + sCAL = 0.352778e-3 x 0.352778e-3 meters, in pngtest.png (Cosmin). + Added png_set_benign_errors(), png_benign_error(), png_chunk_benign_error(). + Added typedef for png_int_32 and png_uint_32 on 64-bit systems. + Added "(unsigned long)" typecast on png_uint_32 variables in printf lists. + +Version 1.4.0beta8 [June 22, 2006] + Added demonstration of user chunk support in pngtest.c, to support the + public sTER chunk and a private vpAg chunk. + +Version 1.4.0beta9 [July 3, 2006] + Removed ordinals from scripts/pngw32.def and removed png_info_int and + png_set_gray_1_2_4_to_8 entries. + Inline call of png_get_uint_32() in png_get_uint_31(). + Use png_get_uint_31() to get vpAg width and height in pngtest.c + Removed WINCE and Netware projects. + Removed standalone Y2KINFO file. + +Version 1.4.0beta10 [July 12, 2006] + Eliminated automatic copy of pngconf.h to pngconf.h.in from configure and + some makefiles, because it was not working reliably. Instead, distribute + pngconf.h.in along with pngconf.h and cause configure and some of the + makefiles to update pngconf.h from pngconf.h.in. + Added pngconf.h to DEPENDENCIES in Makefile.am + +Version 1.4.0beta11 [August 19, 2006] + Removed AC_FUNC_MALLOC from configure.ac. + Added a warning when writing iCCP profile with mismatched profile length. + Patched pnggccrd.c to assemble on x86_64 platforms. + Moved chunk header reading into a separate function png_read_chunk_header() + in pngrutil.c. The chunk header (len+sig) is now serialized in a single + operation (Cosmin). + Implemented support for I/O states. Added png_ptr member io_state, and + functions png_get_io_chunk_name() and png_get_io_state() in pngget.c + (Cosmin). + Added png_get_io_chunk_name and png_get_io_state to scripts/*.def (Cosmin). + Renamed scripts/pngw32.* to scripts/pngwin.* (Cosmin). + Removed the include directories and libraries from CFLAGS and LDFLAGS + in scripts/makefile.gcc (Cosmin). + Used png_save_uint_32() to set vpAg width and height in pngtest.c (Cosmin). + Cast to proper type when getting/setting vpAg units in pngtest.c (Cosmin). + Added pngintrn.h to the Visual C++ projects (Cosmin). + Removed scripts/list (Cosmin). + Updated copyright year in scripts/pngwin.def (Cosmin). + Removed PNG_TYPECAST_NULL and used standard NULL consistently (Cosmin). + Disallowed the user to redefine png_size_t, and enforced a consistent use + of png_size_t across libpng (Cosmin). + Changed the type of png_ptr->rowbytes, PNG_ROWBYTES() and friends + to png_size_t (Cosmin). + Removed png_convert_size() and replaced png_sizeof with sizeof (Cosmin). + Removed some unnecessary type casts (Cosmin). + Changed prototype of png_get_compression_buffer_size() and + png_set_compression_buffer_size() to work with png_size_t instead of + png_uint_32 (Cosmin). + Removed png_memcpy_check() and png_memset_check() (Cosmin). + Fixed a typo (png_byte --> png_bytep) in libpng.3 and libpng.txt (Cosmin). + Clarified that png_zalloc() does not clear the allocated memory, + and png_zalloc() and png_zfree() cannot be PNGAPI (Cosmin). + Renamed png_mem_size_t to png_alloc_size_t, fixed its definition in + pngconf.h, and used it in all memory allocation functions (Cosmin). + Renamed pngintrn.h to pngpriv.h, added a comment at the top of the file + mentioning that the symbols declared in that file are private, and + updated the scripts and the Visual C++ projects accordingly (Cosmin). + Removed circular references between pngconf.h and pngconf.h.in in + scripts/makefile.vc*win32 (Cosmin). + Removing trailing '.' from the warning and error messages (Cosmin). + Added pngdefs.h that is built by makefile or configure, instead of + pngconf.h.in (Glenn). + Detect and fix attempt to write wrong iCCP profile length. + +Version 1.4.0beta12 [October 19, 2006] + Changed "logical" to "bitwise" in the documentation. + Work around Intel-Mac compiler bug by setting PNG_NO_MMX_CODE in pngconf.h + Add a typecast to stifle compiler warning in pngrutil.c + +Version 1.4.0beta13 [November 10, 2006] + Fix potential buffer overflow in sPLT chunk handler. + Fix Makefile.am to not try to link to noexistent files. + +Version 1.4.0beta14 [November 15, 2006] + Check all exported functions for NULL png_ptr. + +Version 1.4.0beta15 [November 17, 2006] + Relocated two misplaced tests for NULL png_ptr. + Built Makefile.in with automake-1.9.6 instead of 1.9.2. + Build configure with autoconf-2.60 instead of 2.59 + Add "install: all" in Makefile.am so "configure; make install" will work. + +Version 1.4.0beta16 [November 17, 2006] + Added a typecast in png_zalloc(). + +Version 1.4.0beta17 [December 4, 2006] + Changed "new_key[79] = '\0';" to "(*new_key)[79] = '\0';" in pngwutil.c + Add "png_bytep" typecast to profile while calculating length in pngwutil.c + +Version 1.4.0beta18 [December 7, 2006] + Added scripts/CMakeLists.txt + +Version 1.4.0beta19 [May 16, 2007] + Revised scripts/CMakeLists.txt + Rebuilt configure and Makefile.in with newer tools. + Added conditional #undef jmpbuf in pngtest.c to undo #define in AIX headers. + Added scripts/makefile.nommx + +Version 1.4.0beta20 [July 9, 2008] + Moved several PNG_HAVE_* macros from pngpriv.h to png.h because applications + calling set_unknown_chunk_location() need them. + Moved several macro definitions from pngpriv.h to pngconf.h + Merge with changes to the 1.2.X branch, as of 1.2.30beta04. + Deleted all use of the MMX assembler code and Intel-licensed optimizations. + Revised makefile.mingw + +Version 1.4.0beta21 [July 21, 2008] + Moved local array "chunkdata" from pngrutil.c to the png_struct, so + it will be freed by png_read_destroy() in case of a read error (Kurt + Christensen). + +Version 1.4.0beta22 [July 21, 2008] + Change "purpose" and "buffer" to png_ptr->chunkdata to avoid memory leaking. + +Version 1.4.0beta23 [July 22, 2008] + Change "chunkdata = NULL" to "png_ptr->chunkdata = NULL" several places in + png_decompress_chunk(). + +Version 1.4.0beta24 [July 25, 2008] + Change all remaining "chunkdata" to "png_ptr->chunkdata" in + png_decompress_chunk(), and remove "chunkdata" from parameter list. + Put a call to png_check_chunk_name() in png_read_chunk_header(). + Revised png_check_chunk_name() to reject a name with a lowercase 3rd byte. + Removed two calls to png_check_chunk_name() occuring later in the process. + Define PNG_NO_ERROR_NUMBERS by default in pngconf.h + +Version 1.4.0beta25 [July 30, 2008] + Added a call to png_check_chunk_name() in pngpread.c + Reverted png_check_chunk_name() to accept a name with a lowercase 3rd byte. + Added png_push_have_buffer() function to pngpread.c + Eliminated PNG_BIG_ENDIAN_SUPPORTED and associated png_get_* macros. + Made inline expansion of png_get_*() optional with PNG_USE_READ_MACROS. + Eliminated all PNG_USELESS_TESTS and PNG_CORRECT_PALETTE_SUPPORTED code. + Synced contrib directory and configure files with libpng-1.2.30beta06. + Eliminated no-longer-used pngdefs.h (but it's still built in the makefiles) + Relocated a misplaced "#endif /* PNG_NO_WRITE_FILTER */" in pngwutil.c + +Version 1.4.0beta26 [August 4, 2008] + Removed png_push_have_buffer() function in pngpread.c. It increased the + compiled library size slightly. + Changed "-Wall" to "-W -Wall" in the CFLAGS in all makefiles (Cosmin Truta) + Declared png_ptr "volatile" in pngread.c and pngwrite.c to avoid warnings. + Updated contrib/visupng/cexcept.h to version 2.0.1 + Added PNG_LITERAL_CHARACTER macros for #, [, and ]. + +Version 1.4.0beta27 [August 5, 2008] + Revised usage of PNG_LITERAL_SHARP in pngerror.c. + Moved newline character from individual png_debug messages into the + png_debug macros. + Allow user to #define their own png_debug, png_debug1, and png_debug2. + +Version 1.4.0beta28 [August 5, 2008] + Revised usage of PNG_LITERAL_SHARP in pngerror.c. + Added PNG_STRING_NEWLINE macro + +Version 1.4.0beta29 [August 9, 2008] + Revised usage of PNG_STRING_NEWLINE to work on non-ISO compilers. + Added PNG_STRING_COPYRIGHT macro. + Added non-ISO versions of png_debug macros. + +Version 1.4.0beta30 [August 14, 2008] + Added premultiplied alpha feature (Volker Wiendl). + +Version 1.4.0beta31 [August 18, 2008] + Moved png_set_premultiply_alpha from pngtrans.c to pngrtran.c + Removed extra crc check at the end of png_handle_cHRM(). Bug introduced + in libpng-1.4.0beta20. + +Version 1.4.0beta32 [August 19, 2008] + Added PNG_WRITE_FLUSH_SUPPORTED block around new png_flush() call. + Revised PNG_NO_STDIO version of png_write_flush() + +Version 1.4.0beta33 [August 20, 2008] + Added png_get|set_chunk_cache_max() to limit the total number of sPLT, + text, and unknown chunks that can be stored. + +Version 1.4.0beta34 [September 6, 2008] + Shortened tIME_string to 29 bytes in pngtest.c + Fixed off-by-one error introduced in png_push_read_zTXt() function in + libpng-1.2.30beta04/pngpread.c (Harald van Dijk) + +Version 1.4.0beta35 [October 6, 2008] + Changed "trans_values" to "trans_color". + Changed so-number from 0 to 14. Some OS do not like 0. + Revised makefile.darwin to fix shared library numbering. + Change png_set_gray_1_2_4_to_8() to png_set_expand_gray_1_2_4_to_8() + in example.c (debian bug report) + +Version 1.4.0beta36 [October 25, 2008] + Sync with tEXt vulnerability fix in libpng-1.2.33rc02. + +Version 1.4.0beta37 [November 13, 2008] + Added png_check_cHRM in png.c and moved checking from pngget.c, pngrutil.c, + and pngwrite.c + +Version 1.4.0beta38 [November 22, 2008] + Added check for zero-area RGB cHRM triangle in png_check_cHRM() and + png_check_cHRM_fixed(). + +Version 1.4.0beta39 [November 23, 2008] + Revised png_warning() to write its message on standard output by default + when warning_fn is NULL. + +Version 1.4.0beta40 [November 24, 2008] + Eliminated png_check_cHRM(). Instead, always use png_check_cHRM_fixed(). + In png_check_cHRM_fixed(), ensure white_y is > 0, and removed redundant + check for all-zero coordinates that is detected by the triangle check. + +Version 1.4.0beta41 [November 26, 2008] + Fixed string vs pointer-to-string error in png_check_keyword(). + Rearranged test expressions in png_check_cHRM_fixed() to avoid internal + overflows. + Added PNG_NO_CHECK_cHRM conditional. + +Version 1.4.0beta42, 43 [December 1, 2008] + Merge png_debug with version 1.2.34beta04. + +Version 1.4.0beta44 [December 6, 2008] + Removed redundant check for key==NULL before calling png_check_keyword() + to ensure that new_key gets initialized and removed extra warning + (Merge with version 1.2.34beta05 -- Arvan Pritchard). + +Version 1.4.0beta45 [December 9, 2008] + In png_write_png(), respect the placement of the filler bytes in an earlier + call to png_set_filler() (Jim Barry). + +Version 1.4.0beta46 [December 10, 2008] + Undid previous change and added PNG_TRANSFORM_STRIP_FILLER_BEFORE and + PNG_TRANSFORM_STRIP_FILLER_AFTER conditionals and deprecated + PNG_TRANSFORM_STRIP_FILLER (Jim Barry). + +Version 1.4.0beta47 [December 15, 2008] + Support for dithering was disabled by default, because it has never + been well tested and doesn't work very well. The code has not + been removed, however, and can be enabled by building libpng with + PNG_READ_DITHER_SUPPORTED defined. + +Version 1.4.0beta48 [February 14, 2009] + Added new exported function png_calloc(). + Combined several instances of png_malloc(); png_memset() into png_calloc(). + Removed prototype for png_freeptr() that was added in libpng-1.4.0beta24 + but was never defined. + +Version 1.4.0beta49 [February 28, 2009] + Added png_fileno() macro to pngconf.h, used in pngwio.c + Corrected order of #ifdef's in png_debug definition in png.h + Fixed bug introduced in libpng-1.4.0beta48 with the memset arguments + for pcal_params. + Fixed order of #ifdef directives in the png_debug defines in png.h + (bug introduced in libpng-1.2.34/1.4.0beta29). + Revised comments in png_set_read_fn() and png_set_write_fn(). + +Version 1.4.0beta50 [March 18, 2009] + Use png_calloc() instead of png_malloc() to allocate big_row_buf when + reading an interlaced file, to avoid a possible UMR. + Undid revision of PNG_NO_STDIO version of png_write_flush(). Users + having trouble with fflush() can build with PNG_NO_WRITE_FLUSH defined + or supply their own flush_fn() replacement. + Revised libpng*.txt and png.h documentation about use of png_write_flush() + and png_set_write_fn(). + Removed fflush() from pngtest.c. + Added "#define PNG_NO_WRITE_FLUSH" to contrib/pngminim/encoder/pngusr.h + +Version 1.4.0beta51 [March 21, 2009] + Removed new png_fileno() macro from pngconf.h . + +Version 1.4.0beta52 [March 27, 2009] + Relocated png_do_chop() ahead of building gamma tables in pngrtran.c + This avoids building 16-bit gamma tables unnecessarily. + Removed fflush() from pngtest.c. + Added "#define PNG_NO_WRITE_FLUSH" to contrib/pngminim/encoder/pngusr.h + Added a section on differences between 1.0.x and 1.2.x to libpng.3/libpng.txt + +Version 1.4.0beta53 [April 1, 2009] + Removed some remaining MMX macros from pngpriv.h + Fixed potential memory leak of "new_name" in png_write_iCCP() (Ralph Giles) + +Version 1.4.0beta54 [April 13, 2009] + Added "ifndef PNG_SKIP_SETJMP_CHECK" block in pngconf.h to allow + application code writers to bypass the check for multiple inclusion + of setjmp.h when they know that it is safe to ignore the situation. + Eliminated internal use of setjmp() in pngread.c and pngwrite.c + Reordered ancillary chunks in pngtest.png to be the same as what + pngtest now produces, and made some cosmetic changes to pngtest output. + Eliminated deprecated png_read_init_3() and png_write_init_3() functions. + +Version 1.4.0beta55 [April 15, 2009] + Simplified error handling in pngread.c and pngwrite.c by putting + the new png_read_cleanup() and png_write_cleanup() functions inline. + +Version 1.4.0beta56 [April 25, 2009] + Renamed "user_chunk_data" to "my_user_chunk_data" in pngtest.c to suppress + "shadowed declaration" warning from gcc-4.3.3. + Renamed "gamma" to "png_gamma" in pngset.c to avoid "shadowed declaration" + warning about a global "gamma" variable in math.h on some platforms. + +Version 1.4.0beta57 [May 2, 2009] + Removed prototype for png_freeptr() that was added in libpng-1.4.0beta24 + but was never defined (again). + Rebuilt configure scripts with autoconf-2.63 instead of 2.62 + Removed pngprefs.h and MMX from makefiles + +Version 1.4.0beta58 [May 14, 2009] + Changed pngw32.def to pngwin.def in makefile.mingw (typo was introduced + in beta57). + Clarified usage of sig_bit versus sig_bit_p in example.c (Vincent Torri) + +Version 1.4.0beta59 [May 15, 2009] + Reformated sources in libpng style (3-space intentation, comment format) + Fixed typo in libpng docs (PNG_FILTER_AVE should be PNG_FILTER_AVG) + Added sections about the git repository and our coding style to the + documentation + Relocated misplaced #endif in pngwrite.c, sCAL chunk handler. + +Version 1.4.0beta60 [May 19, 2009] + Conditionally compile png_read_finish_row() which is not used by + progressive readers. + Added contrib/pngminim/preader to demonstrate building minimal progressive + decoder, based on contrib/gregbook with embedded libpng and zlib. + +Version 1.4.0beta61 [May 20, 2009] + In contrib/pngminim/*, renamed "makefile.std" to "makefile", since there + is only one makefile in those directories, and revised the README files + accordingly. + More reformatting of comments, mostly to capitalize sentences. + +Version 1.4.0beta62 [June 2, 2009] + Added "#define PNG_NO_WRITE_SWAP" to contrib/pngminim/encoder/pngusr.h + and "define PNG_NO_READ_SWAP" to decoder/pngusr.h and preader/pngusr.h + Reformatted several remaining "else statement" into two lines. + Added a section to the libpng documentation about using png_get_io_ptr() + in configure scripts to detect the presence of libpng. + +Version 1.4.0beta63 [June 15, 2009] + Revised libpng*.txt and libpng.3 to mention calling png_set_IHDR() + multiple times and to specify the sample order in the tRNS chunk, + because the ISO PNG specification has a typo in the tRNS table. + Changed several PNG_UNKNOWN_CHUNK_SUPPORTED to + PNG_HANDLE_AS_UNKNOWN_SUPPORTED, to make the png_set_keep mechanism + available for ignoring known chunks even when not saving unknown chunks. + Adopted preference for consistent use of "#ifdef" and "#ifndef" versus + "#if defined()" and "if !defined()" where possible. + +Version 1.4.0beta64 [June 24, 2009] + Eliminated PNG_LEGACY_SUPPORTED code. + Moved the various unknown chunk macro definitions outside of the + PNG_READ|WRITE_ANCILLARY_CHUNK_SUPPORTED blocks. + +Version 1.4.0beta65 [June 26, 2009] + Added a reference to the libpng license in each file. + +Version 1.4.0beta66 [June 27, 2009] + Refer to the libpng license instead of the libpng license in each file. + +Version 1.4.0beta67 [July 6, 2009] + Relocated INVERT_ALPHA within png_read_png() and png_write_png(). + Added high-level API transform PNG_TRANSFORM_GRAY_TO_RGB. + Added an "xcode" project to the projects directory (Alam Arias). + +Version 1.4.0beta68 [July 19, 2009] + Avoid some tests in filter selection in pngwutil.c + +Version 1.4.0beta69 [July 25, 2009] + Simplified the new filter-selection test. This runs faster in the + common "PNG_ALL_FILTERS" and PNG_FILTER_NONE cases. + Removed extraneous declaration from the new call to png_read_gray_to_rgb() + (bug introduced in libpng-1.4.0beta67). + Fixed up xcode project (Alam Arias) + Added a prototype for png_64bit_product() in png.c + +Version 1.4.0beta70 [July 27, 2009] + Avoid a possible NULL dereference in debug build, in png_set_text_2(). + (bug introduced in libpng-0.95, discovered by Evan Rouault) + +Version 1.4.0beta71 [July 29, 2009] + Rebuilt configure scripts with autoconf-2.64. + +Version 1.4.0beta72 [August 1, 2009] + Replaced *.tar.lzma with *.tar.xz in distribution. Get the xz codec + from . + +Version 1.4.0beta73 [August 1, 2009] + Reject attempt to write iCCP chunk with negative embedded profile length + (JD Chen) (CVE-2009-5063). + +Version 1.4.0beta74 [August 8, 2009] + Changed png_ptr and info_ptr member "trans" to "trans_alpha". + +Version 1.4.0beta75 [August 21, 2009] + Removed an extra png_debug() recently added to png_write_find_filter(). + Fixed incorrect #ifdef in pngset.c regarding unknown chunk support. + +Version 1.4.0beta76 [August 22, 2009] + Moved an incorrectly located test in png_read_row() in pngread.c + +Version 1.4.0beta77 [August 27, 2009] + Removed lpXYZ.tar.bz2 (with CRLF), KNOWNBUG, libpng-x.y.z-KNOWNBUG.txt, + and the "noconfig" files from the distribution. + Moved CMakeLists.txt from scripts into the main libpng directory. + Various bugfixes and improvements to CMakeLists.txt (Philip Lowman) + +Version 1.4.0beta78 [August 31, 2009] + Converted all PNG_NO_* tests to PNG_*_SUPPORTED everywhere except pngconf.h + Eliminated PNG_NO_FREE_ME and PNG_FREE_ME_SUPPORTED macros. + Use png_malloc plus a loop instead of png_calloc() to initialize + row_pointers in png_read_png(). + +Version 1.4.0beta79 [September 1, 2009] + Eliminated PNG_GLOBAL_ARRAYS and PNG_LOCAL_ARRAYS; always use local arrays. + Eliminated PNG_CALLOC_SUPPORTED macro and always provide png_calloc(). + +Version 1.4.0beta80 [September 17, 2009] + Removed scripts/libpng.icc + Changed typecast of filler from png_byte to png_uint_16 in png_set_filler(). + (Dennis Gustafsson) + Fixed typo introduced in beta78 in pngtest.c ("#if def " should be "#ifdef ") + +Version 1.4.0beta81 [September 23, 2009] + Eliminated unused PNG_FLAG_FREE_* defines from pngpriv.h + Expanded TAB characters in pngrtran.c + Removed PNG_CONST from all "PNG_CONST PNG_CHNK" declarations to avoid + compiler complaints about doubly declaring things "const". + Changed all "#if [!]defined(X)" to "if[n]def X" where possible. + Eliminated unused png_ptr->row_buf_size + +Version 1.4.0beta82 [September 25, 2009] + Moved redundant IHDR checking into new png_check_IHDR() in png.c + and report all errors found in the IHDR data. + Eliminated useless call to png_check_cHRM() from pngset.c + +Version 1.4.0beta83 [September 25, 2009] + Revised png_check_IHDR() to eliminate bogus complaint about filter_type. + +Version 1.4.0beta84 [September 30, 2009] + Fixed some inconsistent indentation in pngconf.h + Revised png_check_IHDR() to add a test for width variable less than 32-bit. + +Version 1.4.0beta85 [October 1, 2009] + Revised png_check_IHDR() again, to check info_ptr members instead of + the contents of the returned parameters. + +Version 1.4.0beta86 [October 9, 2009] + Updated the "xcode" project (Alam Arias). + Eliminated a shadowed declaration of "pp" in png_handle_sPLT(). + +Version 1.4.0rc01 [October 19, 2009] + Trivial cosmetic changes. + +Version 1.4.0beta87 [October 30, 2009] + Moved version 1.4.0 back into beta. + +Version 1.4.0beta88 [October 30, 2009] + Revised libpng*.txt section about differences between 1.2.x and 1.4.0 + because most of the new features have now been ported back to 1.2.41 + +Version 1.4.0beta89 [November 1, 2009] + More bugfixes and improvements to CMakeLists.txt (Philip Lowman) + Removed a harmless extra png_set_invert_alpha() from pngwrite.c + Apply png_user_chunk_cache_max within png_decompress_chunk(). + Merged libpng-1.2.41.txt with libpng-1.4.0.txt where appropriate. + +Version 1.4.0beta90 [November 2, 2009] + Removed all remaining WIN32_WCE #ifdefs except those involving the + time.h "tm" structure + +Version 1.4.0beta91 [November 3, 2009] + Updated scripts/pngw32.def and projects/wince/png32ce.def + Copied projects/wince/png32ce.def to the scripts directory. + Added scripts/makefile.wce + Patched ltmain.sh for wince support. + Added PNG_CONVERT_tIME_SUPPORTED macro. + +Version 1.4.0beta92 [November 4, 2009] + Make inclusion of time.h in pngconf.h depend on PNG_CONVERT_tIME_SUPPORTED + Make #define PNG_CONVERT_tIME_SUPPORTED depend on PNG_WRITE_tIME_SUPPORTED + Revised libpng*.txt to describe differences from 1.2.40 to 1.4.0 (instead + of differences from 1.2.41 to 1.4.0) + +Version 1.4.0beta93 [November 7, 2009] + Added PNG_DEPSTRUCT, PNG_DEPRECATED, PNG_USE_RESULT, PNG_NORETURN, and + PNG_ALLOCATED macros to detect deprecated direct access to the + png_struct or info_struct members and other deprecated usage in + applications (John Bowler). + Updated scripts/makefile* to add "-DPNG_CONFIGURE_LIBPNG" to CFLAGS, + to prevent warnings about direct access to png structs by libpng + functions while building libpng. They need to be tested, especially + those using compilers other than gcc. + Updated projects/visualc6 and visualc71 with "/d PNG_CONFIGURE_LIBPNG". + They should work but still need to be updated to remove + references to pnggccrd.c or pngvcrd.c and ASM building. + Added README.txt to the beos, cbuilder5, netware, and xcode projects warning + that they need to be updated, to remove references to pnggccrd.c and + pngvcrd.c and to depend on pngpriv.h + Removed three direct references to read_info_ptr members in pngtest.c + that were detected by the new PNG_DEPSTRUCT macro. + Moved the png_debug macro definitions and the png_read_destroy(), + png_write_destroy() and png_far_to_near() prototypes from png.h + to pngpriv.h (John Bowler) + Moved the synopsis lines for png_read_destroy(), png_write_destroy() + png_debug(), png_debug1(), and png_debug2() from libpng.3 to libpngpf.3. + +Version 1.4.0beta94 [November 9, 2009] + Removed the obsolete, unused pnggccrd.c and pngvcrd.c files. + Updated CMakeLists.txt to add "-DPNG_CONFIGURE_LIBPNG" to the definitions. + Removed dependency of pngtest.o on pngpriv.h in the makefiles. + Only #define PNG_DEPSTRUCT, etc. in pngconf.h if not already defined. + +Version 1.4.0beta95 [November 10, 2009] + Changed png_check_sig() to !png_sig_cmp() in contrib programs. + Added -DPNG_CONFIGURE_LIBPNG to contrib/pngminm/*/makefile + Changed png_check_sig() to !png_sig_cmp() in contrib programs. + Corrected the png_get_IHDR() call in contrib/gregbook/readpng2.c + Changed pngminim/*/gather.sh to stop trying to remove pnggccrd.c and pngvcrd.c + Added dependency on pngpriv.h in contrib/pngminim/*/makefile + +Version 1.4.0beta96 [November 12, 2009] + Renamed scripts/makefile.wce to scripts/makefile.cegcc + Revised Makefile.am to use libpng.sys while building libpng.so + so that only PNG_EXPORT functions are exported. + Removed the deprecated png_check_sig() function/macro. + Removed recently removed function names from scripts/*.def + Revised pngtest.png to put chunks in the same order written by pngtest + (evidently the same change made in libpng-1.0beta54 was lost). + Added PNG_PRIVATE macro definition in pngconf.h for possible future use. + +Version 1.4.0beta97 [November 13, 2009] + Restored pngtest.png to the libpng-1.4.0beta7 version. + Removed projects/beos and netware.txt; no one seems to be supporting them. + Revised Makefile.in + +Version 1.4.0beta98 [November 13, 2009] + Added the "xcode" project to zip distributions, + Fixed a typo in scripts/pngwin.def introduced in beta97. + +Version 1.4.0beta99 [November 14, 2009] + Moved libpng-config.in and libpng.pc-configure.in out of the scripts + directory, to libpng-config.in and libpng-pc.in, respectively, and + modified Makefile.am and configure.ac accordingly. Now "configure" + needs nothing from the "scripts" directory. + Avoid redefining PNG_CONST in pngconf.h + +Version 1.4.0beta100 [November 14, 2009] + Removed ASM builds from projects/visualc6 and projects/visualc71 + Removed scripts/makefile.nommx and makefile.vcawin32 + Revised CMakeLists.txt to account for new location of libpng-config.in + and libpng-pc.in + Updated INSTALL to reflect removal and relocation of files. + +Version 1.4.0beta101 [November 14, 2009] + Restored the binary files (*.jpg, *.png, some project files) that were + accidentally deleted from the zip and 7z distributions when the xcode + project was added. + +Version 1.4.0beta102 [November 18, 2009] + Added libpng-config.in and libpng-pc.in to the zip and 7z distributions. + Fixed a typo in projects/visualc6/pngtest.dsp, introduced in beta100. + Moved descriptions of makefiles and other scripts out of INSTALL into + scripts/README.txt + Updated the copyright year in scripts/pngwin.rc from 2006 to 2009. + +Version 1.4.0beta103 [November 21, 2009] + Removed obsolete comments about ASM from projects/visualc71/README_zlib.txt + Align row_buf on 16-byte boundary in memory. + Restored the PNG_WRITE_FLUSH_AFTER_IEND_SUPPORTED guard around the call + to png_flush() after png_write_IEND(). See 1.4.0beta32, 1.4.0beta50 + changes above and 1.2.30, 1.2.30rc01 and rc03 in 1.2.41 CHANGES. Someone + needs this feature. + Make the 'png_jmpbuf' macro expand to a call that records the correct + longjmp function as well as returning a pointer to the setjmp + jmp_buf buffer, and marked direct access to jmpbuf 'deprecated'. + (John Bowler) + +Version 1.4.0beta104 [November 22, 2009] + Removed png_longjmp_ptr from scripts/*.def and libpng.3 + Rebuilt configure scripts with autoconf-2.65 + +Version 1.4.0beta105 [November 25, 2009] + Use fast integer PNG_DIVIDE_BY_255() or PNG_DIVIDE_BY_65535() + to accomplish alpha premultiplication when + PNG_READ_COMPOSITE_NODIV_SUPPORTED is defined. + Changed "/255" to "/255.0" in background calculations to make it clear + that the 255 is used as a double. + +Version 1.4.0beta106 [November 27, 2009] + Removed premultiplied alpha feature. + +Version 1.4.0beta107 [December 4, 2009] + Updated README + Added "#define PNG_NO_PEDANTIC_WARNINGS" in the libpng source files. + Removed "-DPNG_CONFIGURE_LIBPNG" from the makefiles and projects. + Revised scripts/makefile.netbsd, makefile.openbsd, and makefile.sco + to put png.h and pngconf.h in $prefix/include, like the other scripts, + instead of in $prefix/include/libpng. Also revised makefile.sco + to put them in $prefix/include/libpng15 instead of in + $prefix/include/libpng/libpng15. + +Version 1.4.0beta108 [December 11, 2009] + Removed leftover "-DPNG_CONFIGURE_LIBPNG" from contrib/pngminim/*/makefile + Relocated png_do_chop() to its original position in pngrtran.c; the + change in version 1.2.41beta08 caused transparency to be handled wrong + in some 16-bit datastreams (Yusaku Sugai). + +Version 1.4.0beta109 [December 13, 2009] + Added "bit_depth" parameter to the private png_build_gamma_table() function. + Pass bit_depth=8 to png_build_gamma_table() when bit_depth is 16 but the + PNG_16_TO_8 transform has been set, to avoid unnecessary build of 16-bit + tables. + +Version 1.4.0rc02 [December 20, 2009] + Declared png_cleanup_needed "volatile" in pngread.c and pngwrite.c + +Version 1.4.0rc03 [December 22, 2009] + Renamed libpng-pc.in back to libpng.pc.in and revised CMakeLists.txt + (revising the change in 1.4.0beta99) + +Version 1.4.0rc04 [December 25, 2009] + Swapped PNG_UNKNOWN_CHUNKS_SUPPORTED and PNG_HANDLE_AS_UNKNOWN_SUPPORTED + in pngset.c to be consistent with other changes in version 1.2.38. + +Version 1.4.0rc05 [December 25, 2009] + Changed "libpng-pc.in" to "libpng.pc.in" in configure.ac, configure, and + Makefile.in to be consistent with changes in libpng-1.4.0rc03 + +Version 1.4.0rc06 [December 29, 2009] + Reverted the gamma_table changes from libpng-1.4.0beta109. + Fixed some indentation errors. + +Version 1.4.0rc07 [January 1, 2010] + Revised libpng*.txt and libpng.3 about 1.2.x->1.4.x differences. + Use png_calloc() instead of png_malloc(); png_memset() in pngrutil.c + Update copyright year to 2010. + +Version 1.4.0rc08 [January 2, 2010] + Avoid deprecated references to png_ptr-io_ptr and png_ptr->error_ptr + in pngtest.c + +Version 1.4.0 [January 3, 2010] + No changes. + +Version 1.4.1beta01 [January 8, 2010] + Updated CMakeLists.txt for consistent indentation and to avoid an + unclosed if-statement warning (Philip Lowman). + Revised Makefile.am and Makefile.in to remove references to Y2KINFO, + KNOWNBUG, and libpng.la (Robert Schwebel). + Revised the makefiles to install the same files and symbolic + links as configure, except for libpng.la and libpng14.la. + Make png_set|get_compression_buffer_size() available even when + PNG_WRITE_SUPPORTED is not enabled. + Revised Makefile.am and Makefile.in to simplify their maintenance. + Revised scripts/makefile.linux to install a link to libpng14.so.14.1 + +Version 1.4.1beta02 [January 9, 2010] + Revised the rest of the makefiles to install a link to libpng14.so.14.1 + +Version 1.4.1beta03 [January 10, 2010] + Removed png_set_premultiply_alpha() from scripts/*.def + +Version 1.4.1rc01 [January 16, 2010] + No changes. + +Version 1.4.1beta04 [January 23, 2010] + Revised png_decompress_chunk() to improve speed and memory usage when + decoding large chunks. + Added png_set|get_chunk_malloc_max() functions. + +Version 1.4.1beta05 [January 26, 2010] + Relocated "int k" declaration in pngtest.c to minimize its scope. + +Version 1.4.1beta06 [January 28, 2010] + Revised png_decompress_chunk() to use a two-pass method suggested by + John Bowler. + +Version 1.4.1beta07 [February 6, 2010] + Folded some long lines in the source files. + Added defineable PNG_USER_CHUNK_CACHE_MAX, PNG_USER_CHUNK_MALLOC_MAX, + and a PNG_USER_LIMITS_SUPPORTED flag. + Eliminated use of png_ptr->irowbytes and reused the slot in png_ptr as + png_ptr->png_user_chunk_malloc_max. + Revised png_push_save_buffer() to do fewer but larger png_malloc() calls. + +Version 1.4.1beta08 [February 6, 2010] + Minor cleanup and updating of dates and copyright year. + +Version 1.5.0beta01 [February 7, 2010] + Moved declaration of png_struct into private pngstruct.h and png_info + into pnginfo.h + +Version 1.4.1beta09 and 1.5.0beta02 [February 7, 2010] + Reverted to original png_push_save_buffer() code. + +Version 1.4.1beta10 and 1.5.0beta03 [February 8, 2010] + Return allocated "old_buffer" in png_push_save_buffer() before + calling png_error(), to avoid a potential memory leak. + Updated configure script to use SO number 15. + +Version 1.5.0beta04 [February 9, 2010] + Removed malformed "incomplete struct declaration" of png_info from png.h + +Version 1.5.0beta05 [February 12, 2010] + Removed PNG_DEPSTRUCT markup in pngstruct.h and pnginfo.h, and undid the + linewrapping that it entailed. + Revised comments in pngstruct.h and pnginfo.h and added pointers to + the libpng license. + Changed PNG_INTERNAL to PNG_EXPOSE_INTERNAL_STRUCTURES + Removed the cbuilder5 project, which has not been updated to 1.4.0. + +Version 1.4.1beta12 and 1.5.0beta06 [February 14, 2010] + Fixed type declaration of png_get_chunk_malloc_max() in pngget.c (Daisuke + Nishikawa) + +Version 1.5.0beta07 [omitted] + +Version 1.5.0beta08 [February 19, 2010] + Changed #ifdef PNG_NO_STDIO_SUPPORTED to #ifdef PNG_NO_CONSOLE_IO_SUPPORTED + wherever png_snprintf() is used to construct error and warning messages. + Noted in scripts/makefile.mingw that it expects to be run under MSYS. + Removed obsolete unused MMX-querying support from contrib/gregbook + Added exported png_longjmp() function. + Removed the AIX redefinition of jmpbuf in png.h + Added -D_ALLSOURCE in configure.ac, makefile.aix, and CMakeLists.txt + when building on AIX. + +Version 1.5.0beta09 [February 19, 2010] + Removed -D_ALLSOURCE from configure.ac, makefile.aix, and CMakeLists.txt. + Changed the name of png_ptr->jmpbuf to png_ptr->png_jmpbuf in pngstruct.h + +Version 1.5.0beta10 [February 25, 2010] + Removed unused gzio.c from contrib/pngminim gather and makefile scripts + Removed replacement error handlers from contrib/gregbook. Because of + the new png_longjmp() function they are no longer needed. + +Version 1.5.0beta11 [March 6, 2010] + Removed checking for already-included setjmp.h from pngconf.h + Fixed inconsistent indentations and made numerous cosmetic changes. + Revised the "SEE ALSO" style of libpng.3, libpngpf.3, and png.5 + +Version 1.5.0beta12 [March 9, 2010] + Moved "#include png.h" inside pngpriv.h and removed "#include png.h" from + the source files, along with "#define PNG_EXPOSE_INTERNAL_STRUCTURES" + and "#define PNG_NO_PEDANTIC_WARNINGS" (John Bowler). + Created new pngdebug.h and moved debug definitions there. + +Version 1.5.0beta13 [March 10, 2010] + Protect pngstruct.h, pnginfo.h, and pngdebug.h from being included twice. + Revise the "#ifdef" blocks in png_inflate() so it will compile when neither + PNG_USER_CHUNK_MALLOC_MAX nor PNG_SET_CHUNK_MALLOC_LIMIT_SUPPORTED + is defined. + Removed unused png_measure_compressed_chunk() from pngpriv.h and libpngpf.3 + Moved the 'config.h' support from pngconf.h to pngpriv.h + Removed PNGAPI from the png_longjmp_ptr typedef. + Eliminated dependence of pngtest.c on the private pngdebug.h file. + Make all png_debug macros into *unterminated* statements or + expressions (i.e. a trailing ';' must always be added) and correct + the format statements in various png_debug messages. + +Version 1.5.0beta14 [March 14, 2010] + Removed direct access to png_ptr->io_ptr from the Windows code in pngtest.c + Revised Makefile.am to account for recent additions and replacements. + Corrected CE and OS/2 DEF files (scripts/png*def) for symbols removed and + added ordinal numbers to the Windows DEF file and corrected the duplicated + ordinal numbers on CE symbols that are commented out. + Added back in export symbols that can be present in the Windows build but + are disabled by default. + PNG_EXPORT changed to include an 'ordinal' field for DEF file generation. + PNG_CALLBACK added to make callback definitions uniform. PNGAPI split + into PNGCAPI (base C form), PNGAPI (exports) and PNGCBAPI (callbacks), + and appropriate changes made to all files. Cygwin builds re-hinged to + allow procedure call standard changes and to remove the need for the DEF + file (fixes build on Cygwin). + Enabled 'attribute' warnings that are relevant to library APIs and callbacks. + Changed rules for generation of the various symbol files and added a new + rule for a DEF file (which is also added to the distribution). + Updated the symbol file generation to stop it adding spurious spaces + to EOL (coming from preprocessor macro expansion). Added a facility + to join tokens in the output and rewrite *.dfn to use this. + Eliminated scripts/*.def in favor of libpng.def; updated projects/visualc71 + and removed scripts/makefile.cygwin. + Made PNG_BUILD_DLL safe: it can be set whenever a DLL is being built. + Removed the include of sys/types.h - apparently unnecessary now on the + platforms on which it happened (all but Mac OS and RISC OS). + Moved the Mac OS test into pngpriv.h (the only place it is used.) + +Version 1.5.0beta15 [March 17, 2010] + Added symbols.chk target to Makefile.am to validate the symbols in png.h + against the new DEF file scripts/symbols.def. + Changed the default DEF file back to pngwin.def. + Removed makefile.mingw. + Eliminated PNG_NO_EXTERN and PNG_ALL_EXTERN + +Version 1.5.0beta16 [April 1, 2010] + Make png_text_struct independent of PNG_iTXt_SUPPORTED, so that + fields are initialized in all configurations. The READ/WRITE + macros (PNG_(READ|WRITE)_iTXt_SUPPORTED) still function as + before to disable code to actually read or write iTXt chunks + and iTXt_SUPPORTED can be used to detect presence of either + read or write support (but it is probably better to check for + the one actually required - read or write.) + Combined multiple png_warning() calls for a single error. + Restored the macro definition of png_check_sig(). + +Version 1.5.0beta17 [April 17, 2010] + Added some "(long)" typecasts to printf calls in png_handle_cHRM(). + Documented the fact that png_set_dither() was disabled since libpng-1.4.0. + Reenabled png_set_dither() but renamed it to png_set_quantize() to reflect + more accurately what it actually does. At the same time, renamed + the PNG_DITHER_[RED,GREEN_BLUE]_BITS macros to + PNG_QUANTIZE_[RED,GREEN,BLUE]_BITS. + Added some "(long)" typecasts to printf calls in png_handle_cHRM(). + Freeze build-time only configuration in the build. + In all prior versions of libpng most configuration options + controlled by compiler #defines had to be repeated by the + application code that used libpng. This patch changes this + so that compilation options that can only be changed at build + time are frozen in the build. Options that are compiler + dependent (and those that are system dependent) are evaluated + each time - pngconf.h holds these. Options that can be changed + per-file in the application are in png.h. Frozen options are + in the new installed header file pnglibconf.h (John Bowler) + Removed the xcode project because it has not been updated to work + with libpng-1.5.0. + Removed the ability to include optional pngusr.h + +Version 1.5.0beta18 [April 17, 2010] + Restored the ability to include optional pngusr.h + Moved replacements for png_error() and png_warning() from the + contrib/pngminim project to pngerror.c, for use when warnings or + errors are disabled via PNG_NO_WARN or PNG_NO_ERROR_TEXT, to avoid + storing unneeded error/warning text. + Updated contrib/pngminim project to work with the new pnglibconf.h + Added some PNG_NO_* defines to contrib/pngminim/*/pngusr.h to save space. + +Version 1.5.0beta19 [April 24, 2010] + Added PNG_{READ,WRITE}_INT_FUNCTIONS_SUPPORTED. This allows the functions + to read and write ints to be disabled independently of PNG_USE_READ_MACROS, + which allows libpng to be built with the functions even though the default + is to use the macros - this allows applications to choose at app build + time whether or not to use macros (previously impossible because the + functions weren't in the default build.) + Changed Windows calling convention back to __cdecl for API functions. + For Windows/x86 platforms only: + __stdcall is no longer needed for Visual Basic, so libpng-1.5.0 uses + __cdecl throughout (both API functions and callbacks) on Windows/x86 + platforms. + Replaced visualc6 and visualc71 projects with new vstudio project + Relaxed the overly-restrictive permissions of some files. + +Version 1.5.0beta20 [April 24, 2010] + Relaxed more overly-restrictive permissions of some files. + +Version 1.5.0beta21 [April 27, 2010] + Removed some unwanted binary bytes and changed CRLF to NEWLINE in the new + vstudio project files, and some trivial editing of some files in the + scripts directory. + Set PNG_NO_READ_BGR, PNG_NO_IO_STATE, and PNG_NO_TIME_RFC1123 in + contrib/pngminim/decoder/pngusr.h to make a smaller decoder application. + +Version 1.5.0beta22 [April 28, 2010] + Fixed dependencies of GET_INT_32 - it does not require READ_INT_FUNCTIONS + because it has a macro equivalent. + Improved the options.awk script; added an "everything off" option. + Revised contrib/pngminim to use the "everything off" option in pngusr.dfa. + +Version 1.5.0beta23 [April 29, 2010] + Corrected PNG_REMOVED macro to take five arguments. + The macro was documented with two arguments (name,ordinal), however + the symbol checking .dfn files assumed five arguments. The five + argument form seems more useful so it is changed to that. + Corrected PNG_UNKNOWN_CHUNKS_SUPPORTED to PNG_HANDLE_AS_UNKNOWN_SUPPORTED + in gregbook/readpng2.c + Corrected protection of png_get_user_transform_ptr. The API declaration in + png.h is removed if both READ and WRITE USER_TRANSFORM are turned off + but was left defined in pngtrans.c + Added logunsupported=1 to cause pnglibconf.h to document disabled options. + This makes the installed pnglibconf.h more readable but causes no + other change. The intention is that users of libpng will find it + easier to understand if an API they need is missing. + Include png_reset_zstream() in png.c only when PNG_READ_SUPPORTED is defined. + Removed dummy_inflate.c from contrib/pngminim/encoder + Removed contrib/pngminim/*/gather.sh; gathering is now done in the makefile. + +Version 1.5.0beta24 [May 7, 2010] + Use bitwise "&" instead of arithmetic mod in pngrutil.c calculation of the + offset of the png_ptr->rowbuf pointer into png_ptr->big_row_buf. + Added more blank lines for readability. + +Version 1.5.0beta25 [June 18, 2010] + In pngpread.c: png_push_have_row() add check for new_row > height + Removed the now-redundant check for out-of-bounds new_row from example.c + +Version 1.5.0beta26 [June 18, 2010] + In pngpread.c: png_push_process_row() add check for too many rows. + +Version 1.5.0beta27 [June 18, 2010] + Removed the check added in beta25 as it is now redundant. + +Version 1.5.0beta28 [June 20, 2010] + Rewrote png_process_IDAT_data to consistently treat extra data as warnings + and handle end conditions more cleanly. + Removed the new (beta26) check in png_push_process_row(). + +Version 1.5.0beta29 [June 21, 2010] + Revised scripts/options.awk to work on Sunos (but still doesn't work) + Added comment to options.awk and contrib/pngminim/*/makefile to try nawk. + +Version 1.5.0beta30 [June 22, 2010] + Stop memory leak when reading a malformed sCAL chunk. + +Version 1.5.0beta31 [June 26, 2010] + Revised pngpread.c patch of beta28 to avoid an endless loop. + Removed some trailing blanks. + +Version 1.5.0beta32 [June 26, 2010] + Removed leftover scripts/options.patch and scripts/options.rej + +Version 1.5.0beta33 [July 6, 3010] + Made FIXED and FLOATING options consistent in the APIs they enable and + disable. Corrected scripts/options.awk to handle both command line + options and options specified in the .dfa files. + Changed char *msg to PNG_CONST char *msg in pngrutil.c + Make png_set_sRGB_gAMA_and_cHRM set values using either the fixed or + floating point APIs, but not both. + Reversed patch to remove error handler when the jmp_buf is stored in the + main program structure, not the png_struct. + The error handler is needed because the default handler in libpng will + always use the jmp_buf in the library control structure; this is never + set. The gregbook code is a useful example because, even though it + uses setjmp/longjmp, it shows how error handling can be implemented + using control mechanisms not directly supported by libpng. The + technique will work correctly with mechanisms such as Microsoft + Structure Exceptions or C++ exceptions (compiler willing - note that gcc + does not by default support interworking of C and C++ error handling.) + Reverted changes to call png_longjmp in contrib/gregbook where it is not + appropriate. If mainprog->jmpbuf is used by setjmp, then png_longjmp + cannot be used. + Changed "extern PNG_EXPORT" to "PNG_EXPORT" in png.h (Jan Nijtmans) + Changed "extern" to "PNG_EXTERN" in pngpriv.h (except for the 'extern "C" {') + +Version 1.5.0beta34 [July 12, 2010] + Put #ifndef PNG_EXTERN, #endif around the define PNG_EXTERN in pngpriv.h + +Version 1.5.0beta35 [July 24, 2010] + Removed some newly-added TAB characters. + Added -DNO_PNG_SNPRINTF to CFLAGS in scripts/makefile.dj2 + Moved the definition of png_snprintf() outside of the enclosing + #ifdef blocks in pngconf.h + +Version 1.5.0beta36 [July 29, 2010] + Patches by John Bowler: + Fixed point APIs are now supported throughout (no missing APIs). + Internal fixed point arithmetic support exists for all internal floating + point operations. + sCAL validates the floating point strings it is passed. + Safe, albeit rudimentary, Watcom support is provided by PNG_API_RULE==2 + Two new APIs exist to get the number of passes without turning on the + PNG_INTERLACE transform and to get the number of rows in the current + pass. + A new test program, pngvalid.c, validates the gamma code. + Errors in the 16-bit gamma correction (overflows) have been corrected. + cHRM chunk testing is done consistently (previously the floating point + API bypassed it, because the test really didn't work on FP, now the test + is performed on the actual values to be stored in the PNG file so it + works in the FP case too.) + Most floating point APIs now simply call the fixed point APIs after + converting the values to the fixed point form used in the PNG file. + The standard headers no longer include zlib.h, which is currently only + required for pngstruct.h and can therefore be internal. + Revised png_get_int_32 to undo the PNG two's complement representation of + negative numbers. + +Version 1.5.0beta37 [July 30, 2010] + Added a typecast in png_get_int_32() in png.h and pngrutil.h to avoid + a compiler warning. + Replaced oFFs 0,0 with oFFs -10,20 in pngtest.png + +Version 1.5.0beta38 [July 31, 2010] + Implemented remaining "_fixed" functions. + Corrected a number of recently introduced warnings mostly resulting from + safe but uncast assignments to shorter integers. Also added a zlib + VStudio release library project because the latest zlib Official Windows + build does not include such a thing. + Revised png_get_int_16() to be similar to png_get_int_32(). + Restored projects/visualc71. + +Version 1.5.0beta39 [August 2, 2010] + VisualC/GCC warning fixes, VisualC build fixes + The changes include support for function attributes in VC in addition to + those already present in GCC - necessary because without these some + warnings are unavoidable. Fixes include signed/unsigned fixes in + pngvalid and checks with gcc -Wall -Wextra -Wunused. + VC requires function attributes on function definitions as well as + declarations, PNG_FUNCTION has been added to enable this and the + relevant function definitions changed. + +Version 1.5.0beta40 [August 6, 2010] + Correct use of _WINDOWS_ in pngconf.h + Removed png_mem_ #defines; they are no longer used. + Added the sRGB chunk to pngtest.png + +Version 1.5.0beta41 [August 11, 2010] + Added the cHRM chunk to pngtest.png + Don't try to use version-script with cygwin/mingw. + Revised contrib/gregbook to work under cygwin/mingw. + +Version 1.5.0beta42 [August 18, 2010] + Add .dll.a to the list of extensions to be symlinked by Makefile.am (Yaakov) + Made all API functions that have const arguments and constant string + literal pointers declare them (John Bowler). + +Version 1.5.0beta43 [August 20, 2010] + Removed spurious tabs, shorten long lines (no source change) + Also added scripts/chkfmt to validate the format of all the files that can + reasonably be validated (it is suggested to run "make distclean" before + checking, because some machine generated files have long lines.) + Reformatted the CHANGES file to be more consistent throughout. + Made changes to address various issues identified by GCC, mostly + signed/unsigned and shortening problems on assignment but also a few + difficult to optimize (for GCC) loops. + Fixed non-GCC fixed point builds. In png.c a declaration was misplaced + in an earlier update. Fixed to declare the auto variables at the head. + Use cexcept.h in pngvalid.c. + +Version 1.5.0beta44 [August 24, 2010] + Updated CMakeLists.txt to use CMAKE_INSTALL_LIBDIR variable; useful for + installing libpng in /usr/lib64 (Funda Wang). + Revised CMakeLists.txt to put the man pages in share/man/man* not man/man* + Revised CMakeLists.txt to make symlinks instead of copies when installing. + Changed PNG_LIB_NAME from pngNN to libpngNN in CMakeLists.txt (Philip Lowman) + Implemented memory checks within pngvalid + Reformatted/rearranged pngvalid.c to assist use of progressive reader. + Check interlaced images in pngvalid + Clarified pngusr.h comments in pnglibconf.dfa + Simplified the pngvalid error-handling code now that cexcept.h is in place. + Implemented progressive reader in pngvalid.c for standard tests + Implemented progressive read in pngvalid.c gamma tests + Turn on progressive reader in pngvalid.c by default and tidy code. + +Version 1.5.0beta45 [August 26, 2010] + Added an explicit make step to projects/vstudio for pnglibconf.h + Also corrected zlib.vcxproj into which Visual Studio had introduced + what it calls an "authoring error". The change to make pnglibconf.h + simply copies the file; in the future it may actually generate the + file from scripts/pnglibconf.dfa as the other build systems do. + Changed pngvalid to work when floating point APIs are disabled + Renamed the prebuilt scripts/pnglibconf.h to scripts/pnglibconf.h.prebuilt + Supply default values for PNG_USER_PRIVATEBUILD and PNG_USER_DLLFNAME_POSTFIX + in pngpriv.h in case the user neglected to define them in their pngusr.h + +Version 1.5.0beta46 [August 28, 2010] + Added new private header files to libpng_sources in CMakeLists.txt + Added PNG_READ_16BIT, PNG_WRITE_16BIT, and PNG_16BIT options. + Added reference to scripts/pnglibconf.h.prebuilt in the visualc71 project. + +Version 1.5.0beta47 [September 11, 2010] + Fixed a number of problems with 64-bit compilation reported by Visual + Studio 2010 (John Bowler). + +Version 1.5.0beta48 [October 4, 2010] + Updated CMakeLists.txt (Philip Lowman). + Revised autogen.sh to recognize and use $AUTOCONF, $AUTOMAKE, $AUTOHEADER, + $AUTOPOINT, $ACLOCAL and $LIBTOOLIZE + Fixed problem with symbols creation in Makefile.am which was assuming that + all versions of ccp write to standard output by default (Martin Banky). The + bug was introduced in libpng-1.2.9beta5. + Removed unused mkinstalldirs. + +Version 1.5.0beta49 [October 8, 2010] + Undid Makefile.am revision of 1.5.0beta48. + +Version 1.5.0beta50 [October 14, 2010] + Revised Makefile.in to account for mkinstalldirs being removed. + Added some "(unsigned long)" typecasts in printf statements in pngvalid.c. + Suppressed a compiler warning in png_handle_sPLT(). + Check for out-of-range text compression mode in png_set_text(). + +Version 1.5.0beta51 [October 15, 2010] + Changed embedded dates to "(PENDING RELEASE) in beta releases (and future + rc releases) to minimize the difference between releases. + +Version 1.5.0beta52 [October 16, 2010] + Restored some of the embedded dates (in png.h, png.c, documentation, etc.) + +Version 1.5.0beta53 [October 18, 2010] + Updated INSTALL to mention using "make maintainer-clean" and to remove + obsolete statement about a custom ltmain.sh + Disabled "color-tests" by default in Makefile.am so it will work with + automake versions earlier than 1.11.1 + Use document name "libpng-manual.txt" instead of "libpng-.txt" + to simplify version differences. + Removed obsolete remarks about setjmp handling from INSTALL. + Revised and renamed the typedef in png.h and png.c that was designed + to catch library and header mismatch. + +Version 1.5.0beta54 [November 10, 2010] + Require 48 bytes, not 64 bytes, for big_row_buf in overflow checks. + Used a consistent structure for the pngget.c functions. + +Version 1.5.0beta55 [November 21, 2010] + Revised png_get_uint_32, png_get_int_32, png_get_uint_16 (Cosmin) + Moved reading of file signature into png_read_sig (Cosmin) + Fixed atomicity of chunk header serialization (Cosmin) + Added test for io_state in pngtest.c (Cosmin) + Added "#!/bin/sh" at the top of contrib/pngminim/*/gather.sh scripts. + Changes to remove gcc warnings (John Bowler) + Certain optional gcc warning flags resulted in warnings in libpng code. + With these changes only -Wconversion and -Wcast-qual cannot be turned on. + Changes are trivial rearrangements of code. -Wconversion is not possible + for pngrutil.c (because of the widespread use of += et al on variables + smaller than (int) or (unsigned int)) and -Wcast-qual is not possible + with pngwio.c and pngwutil.c because the 'write' callback and zlib + compression both fail to declare their input buffers with 'const'. + +Version 1.5.0beta56 [December 7, 2010] + Added the private PNG_UNUSED() macro definition in pngpriv.h. + Added some commentary about PNG_EXPORT in png.h and pngconf.h + Revised PNG_EXPORT() macro and added PNG_EXPORTA() macro, with the + objective of simplifying and improving the cosmetic appearance of png.h. + Fixed some incorrect "=" macro names in pnglibconf.dfa + Included documentation of changes in 1.5.0 from 1.4.x in libpng-manual.txt + +Version 1.5.0beta57 [December 9, 2010] + Documented the pngvalid gamma error summary with additional comments and + print statements. + Improved missing symbol handling in checksym.awk; symbols missing in both + the old and new files can now be optionally ignored, treated as errors + or warnings. + Removed references to pngvcrd.c and pnggccrd.c from the vstudio project. + Updated "libpng14" to "libpng15" in the visualc71 project. + Enabled the strip16 tests in pngvalid.` + Don't display test results (except PASS/FAIL) when running "make test". + Instead put them in pngtest-log.txt + Added "--with-zprefix=" to configure.ac + Updated the prebuilt configuration files to autoconf version 2.68 + +Version 1.5.0beta58 [December 19, 2010] + Fixed interlace image handling and add test cases (John Bowler) + Fixed the clean rule in Makefile.am to remove pngtest-log.txt + Made minor changes to work around warnings in gcc 3.4 + +Version 1.5.0rc01 [December 27, 2010] + No changes. + +Version 1.5.0rc02 [December 27, 2010] + Eliminated references to the scripts/*.def files in project/visualc71. + +Version 1.5.0rc03 [December 28, 2010] + Eliminated scripts/*.def and revised Makefile.am accordingly + +Version 1.5.0rc04 [December 29, 2010] + Fixed bug in background transformation handling in pngrtran.c (it was + looking for the flag in png_ptr->transformations instead of in + png_ptr->flags) (David Raymond). + +Version 1.5.0rc05 [December 31, 2010] + Fixed typo in a comment in CMakeLists.txt (libpng14 => libpng15) (Cosmin) + +Version 1.5.0rc06 [January 4, 2011] + Changed the new configure option "zprefix=string" to "zlib-prefix=string" + +Version 1.5.0rc07 [January 4, 2011] + Updated copyright year. + +Version 1.5.0 [January 6, 2011] + No changes. + +version 1.5.1beta01 [January 8, 2011] + Added description of png_set_crc_action() to the manual. + Added a note in the manual that the type of the iCCP profile was changed + from png_charpp to png_bytepp in png_get_iCCP(). This change happened + in version 1.5.0beta36 but is not noted in the CHANGES. Similarly, + it was changed from png_charpp to png_const_bytepp in png_set_iCCP(). + Ensure that png_rgb_to_gray ignores palette mapped images, if libpng + internally happens to call it with one, and fixed a failure to handle + palette mapped images correctly. This fixes CVE-2690. + +Version 1.5.1beta02 [January 14, 2011] + Fixed a bug in handling of interlaced images (bero at arklinux.org). + Updated CMakeLists.txt (Clifford Yapp) + +Version 1.5.1beta03 [January 14, 2011] + Fixed typecasting of some png_debug() statements (Cosmin) + +Version 1.5.1beta04 [January 16, 2011] + Updated documentation of png_set|get_tRNS() (Thomas Klausner). + Mentioned in the documentation that applications must #include "zlib.h" + if they need access to anything in zlib.h, and that a number of + macros such as png_memset() are no longer accessible by applications. + Corrected pngvalid gamma test "sample" function to access all of the color + samples of each pixel, instead of sampling the red channel three times. + Prefixed variable names index, div, exp, gamma with "png_" to avoid "shadow" + warnings, and (mistakenly) changed png_exp() to exp(). + +Version 1.5.1beta05 [January 16, 2011] + Changed variable names png_index, png_div, png_exp, and png_gamma to + char_index, divisor, exp_b10, and gamma_val, respectively, and + changed exp() back to png_exp(). + +Version 1.5.1beta06 [January 20, 2011] + Prevent png_push_crc_skip() from hanging while reading an unknown chunk + or an over-large compressed zTXt chunk with the progressive reader. + Eliminated more GCC "shadow" warnings. + Revised png_fixed() in png.c to avoid compiler warning about reaching the + end without returning anything. + +Version 1.5.1beta07 [January 22, 2011] + In the manual, describe the png_get_IHDR() arguments in the correct order. + Added const_png_structp and const_png_infop types, and used them in + prototypes for most png_get_*() functions. + +Version 1.5.1beta08 [January 23, 2011] + Added png_get_io_chunk_type() and deprecated png_get_io_chunk_name() + Added synopses for the IO_STATE functions and other missing synopses + to the manual. Removed the synopses from libpngpf.3 because they + were out of date and no longer useful. Better information can be + obtained by reading the prototypes and comments in pngpriv.h + Attempted to fix cpp on Solaris with S. Studio 12 cc, fix build + Added a make macro DFNCPP that is a CPP that will accept the tokens in + a .dfn file and adds configure stuff to test for such a CPP. ./configure + should fail if one is not available. + Corrected const_png_ in png.h to png_const_ to avoid polluting the namespace. + Added png_get_current_row_number and png_get_current_pass_number for the + benefit of the user transform callback. + Added png_process_data_pause and png_process_data_skip for the benefit of + progressive readers that need to stop data processing or want to optimize + skipping of unread data (e.g., if the reader marks a chunk to be skipped.) + +Version 1.5.1beta09 [January 24, 2011] + Enhanced pngvalid, corrected an error in gray_to_rgb, corrected doc error. + pngvalid contains tests of transforms, which tests are currently disabled + because they are incompletely tested. gray_to_rgb was failing to expand + the bit depth for smaller bit depth images; this seems to be a long + standing error and resulted, apparently, in invalid output + (CVE-2011-0408, CERT VU#643140). The documentation did not accurately + describe what libpng really does when converting RGB to gray. + +Version 1.5.1beta10 [January 27, 2010] + Fixed incorrect examples of callback prototypes in the manual, that were + introduced in libpng-1.0.0. + In addition the order of the png_get_uint macros with respect to the + relevant function definitions has been reversed. This helps the + preprocessing of the symbol files be more robust. Furthermore, the + symbol file preprocessing now uses -DPNG_NO_USE_READ_MACROS even when + the library may actually be built with PNG_USE_READ_MACROS; this stops + the read macros interfering with the symbol file format. + Made the manual, synopses, and function prototypes use the function + argument names file_gamma, int_file_gamma, and srgb_intent consistently. + +Version 1.5.1beta11 [January 28, 2011] + Changed PNG_UNUSED from "param=param;" to "{if(param){}}". + Corrected local variable type in new API png_process_data_skip() + The type was self-evidently incorrect but only causes problems on 64-bit + architectures. + Added transform tests to pngvalid and simplified the arguments. + +Version 1.5.1rc01 [January 29, 2011] + No changes. + +Version 1.5.1rc02 [January 31, 2011] + Added a request in the manual that applications do not use "png_" or + "PNG_" to begin any of their own symbols. + Changed PNG_UNUSED to "(void)param;" and updated the commentary in pngpriv.h + +Version 1.5.1 [February 3, 2011] + No changes. + +Version 1.5.2beta01 [February 13, 2011] + More -Wshadow fixes for older gcc compilers. Older gcc versions apparently + check formal parameters names in function declarations (as well as + definitions) to see if they match a name in the global namespace. + Revised PNG_EXPORTA macro to not use an empty parameter, to accommodate the + old VisualC++ preprocessor. + Turned on interlace handling in png_read_png(). + Fixed gcc pendantic warnings. + Handle longjmp in Cygwin. + Fixed png_get_current_row_number() in the interlaced case. + Cleaned up ALPHA flags and transformations. + Implemented expansion to 16 bits. + +Version 1.5.2beta02 [February 19, 2011] + Fixed mistake in the descriptions of user read_transform and write_transform + function prototypes in the manual. The row_info struct is png_row_infop. + Reverted png_get_current_row_number() to previous (1.5.2beta01) behavior. + Corrected png_get_current_row_number documentation + Fixed the read/write row callback documentation. + This documents the current behavior, where the callback is called after + every row with information pertaining to the next row. + +Version 1.5.2beta03 [March 3, 2011] + Fixed scripts/makefile.vcwin32 + Updated contrib/pngsuite/README to add the word "modify". + Define PNG_ALLOCATED to blank when _MSC_VER<1300. + +Version 1.5.2rc01 [March 19, 2011] + Define remaining attributes to blank when MSC_VER<1300. + ifdef out mask arrays in pngread.c when interlacing is not supported. + +Version 1.5.2rc02 [March 22, 2011] + Added a hint to try CPP=/bin/cpp if "cpp -E" fails in scripts/pnglibconf.mak + and in contrib/pngminim/*/makefile, eg., on SunOS 5.10, and removed "strip" + from the makefiles. + Fixed a bug (present since libpng-1.0.7) that makes png_handle_sPLT() fail + to compile when PNG_NO_POINTER_INDEXING is defined (Chubanov Kirill) + +Version 1.5.2rc03 [March 24, 2011] + Don't include standard header files in png.h while building the symbol table, + to avoid cpp failure on SunOS (introduced PNG_BUILDING_SYMBOL_TABLE macro). + +Version 1.5.2 [March 31, 2011] + No changes. + +Version 1.5.3beta01 [April 1, 2011] + Re-initialize the zlib compressor before compressing non-IDAT chunks. + Added API functions (png_set_text_compression_level() and four others) to + set parameters for zlib compression of non-IDAT chunks. + +Version 1.5.3beta02 [April 3, 2011] + Updated scripts/symbols.def with new API functions. + Only compile the new zlib re-initializing code when text or iCCP is + supported, using PNG_WRITE_COMPRESSED_TEXT_SUPPORTED macro. + Improved the optimization of the zlib CMF byte (see libpng-1.2.6beta03). + Optimize the zlib CMF byte in non-IDAT compressed chunks + +Version 1.5.3beta03 [April 16, 2011] + Fixed gcc -ansi -pedantic compile. A strict ANSI system does not have + snprintf, and the "__STRICT_ANSI__" detects that condition more reliably + than __STDC__ (John Bowler). + Removed the PNG_PTR_NORETURN attribute because it too dangerous. It tells + the compiler that a user supplied callback (the error handler) does not + return, yet there is no guarantee in practice that the application code + will correctly implement the error handler because the compiler only + issues a warning if there is a mistake (John Bowler). + Removed the no-longer-used PNG_DEPSTRUCT macro. + Updated the zlib version to 1.2.5 in the VStudio project. + Fixed 64-bit builds where png_uint_32 is smaller than png_size_t in + pngwutil.c (John Bowler). + Fixed bug with stripping the filler or alpha channel when writing, that + was introduced in libpng-1.5.2beta01 (bug report by Andrew Church). + +Version 1.5.3beta04 [April 27, 2011] + Updated pngtest.png with the new zlib CMF optimization. + Cleaned up conditional compilation code and of background/gamma handling + Internal changes only except a new option to avoid compiling the + png_build_grayscale_palette API (which is not used at all internally.) + The main change is to move the transform tests (READ_TRANSFORMS, + WRITE_TRANSFORMS) up one level to the caller of the APIs. This avoids + calls to spurious functions if all transforms are disabled and slightly + simplifies those functions. Pngvalid modified to handle this. + A minor change is to stop the strip_16 and expand_16 interfaces from + disabling each other; this allows the future alpha premultiplication + code to use 16-bit intermediate values while still producing 8-bit output. + png_do_background and png_do_gamma have been simplified to take a single + pointer to the png_struct rather than pointers to every item required + from the png_struct. This makes no practical difference to the internal + code. + A serious bug in the pngvalid internal routine 'standard_display_init' has + been fixed - this failed to initialize the red channel and accidentally + initialized the alpha channel twice. + Changed png_struct jmp_buf member name from png_jmpbuf to tmp_jmpbuf to + avoid a possible clash with the png_jmpbuf macro on some platforms. + +Version 1.5.3beta05 [May 6, 2011] + Added the "_POSIX_SOURCE" feature test macro to ensure libpng sees the + correct API. _POSIX_SOURCE is defined in pngpriv.h, pngtest.c and + pngvalid.c to ensure that POSIX conformant systems disable non-POSIX APIs. + Removed png_snprintf and added formatted warning messages. This change adds + internal APIs to allow png_warning messages to have parameters without + requiring the host OS to implement snprintf. As a side effect the + dependency of the tIME-supporting RFC1132 code on stdio is removed and + PNG_NO_WARNINGS does actually work now. + Pass "" instead of '\0' to png_default_error() in png_err(). This mistake + was introduced in libpng-1.2.20beta01. This fixes CVE-2011-2691. + Added PNG_WRITE_OPTIMIZE_CMF_SUPPORTED macro to make the zlib "CMF" byte + optimization configureable. + IDAT compression failed if preceded by a compressed text chunk (bug + introduced in libpng-1.5.3beta01-02). This was because the attempt to + reset the zlib stream in png_write_IDAT happened after the first IDAT + chunk had been deflated - much too late. In this change internal + functions were added to claim/release the z_stream and, hopefully, make + the code more robust. Also deflateEnd checking is added - previously + libpng would ignore an error at the end of the stream. + +Version 1.5.3beta06 [May 8, 2011] + Removed the -D_ALL_SOURCE from definitions for AIX in CMakeLists.txt + Implemented premultiplied alpha support: png_set_alpha_mode API + +Version 1.5.3beta07 [May 11, 2011] + Added expand_16 support to the high level interface. + Added named value and 'flag' gamma support to png_set_gamma. Made a minor + change from the previous (unreleased) ABI/API to hide the exact value used + for Macs - it's not a good idea to embed this in the ABI! + Moved macro definitions for PNG_HAVE_IHDR, PNG_HAVE_PLTE, and PNG_AFTER_IDAT + from pngpriv.h to png.h because they must be visible to applications + that call png_set_unknown_chunks(). + Check for up->location !PNG_AFTER_IDAT when writing unknown chunks + before IDAT. + +Version 1.5.3beta08 [May 16, 2011] + Improved "pngvalid --speed" to exclude more of pngvalid from the time. + Documented png_set_alpha_mode(), other changes in libpng.3/libpng-manual.txt + The cHRM chunk now sets the defaults for png_set_rgb_to_gray() (when negative + parameters are supplied by the caller), while in the absence of cHRM + sRGB/Rec 709 values are still used. This introduced a divide-by-zero + bug in png_handle_cHRM(). + The bKGD chunk no longer overwrites the background value set by + png_set_background(), allowing the latter to be used before the file + header is read. It never performed any useful function to override + the default anyway. + Added memory overwrite and palette image checks to pngvalid.c + Previously palette image code was poorly checked. Since the transformation + code has a special palette path in most cases this was a severe weakness. + Minor cleanup and some extra checking in pngrutil.c and pngrtran.c. When + expanding an indexed image, always expand to RGBA if transparency is + present. + +Version 1.5.3beta09 [May 17, 2011] + Reversed earlier 1.5.3 change of transformation order; move png_expand_16 + back where it was. The change doesn't work because it requires 16-bit + gamma tables when the code only generates 8-bit ones. This fails + silently; the libpng code just doesn't do any gamma correction. Moving + the tests back leaves the old, inaccurate, 8-bit gamma calculations, but + these are clearly better than none! + +Version 1.5.3beta10 [May 20, 2011] + + png_set_background() and png_expand_16() did not work together correctly. + This problem is present in 1.5.2; if png_set_background is called with + need_expand false and the matching 16 bit color libpng erroneously just + treats it as an 8-bit color because of where png_do_expand_16 is in the + transform list. This simple fix reduces the supplied colour to 8-bits, + so it gets smashed, but this is better than the current behavior. + Added tests for expand16, more fixes for palette image tests to pngvalid. + Corrects the code for palette image tests and disables attempts to + validate palette colors. + +Version 1.5.3rc01 [June 3, 2011] + No changes. + +Version 1.5.3rc02 [June 8, 2011] + Fixed uninitialized memory read in png_format_buffer() (Bug report by + Frank Busse, CVE-2011-2501, related to CVE-2004-0421). + +Version 1.5.3beta11 [June 11, 2011] + Fixed png_handle_sCAL which is broken in 1.5. This fixes CVE 2011-2692. + Added sCAL to pngtest.png + Revised documentation about png_set_user_limits() to say that it also affects + png writing. + Revised handling of png_set_user_limits() so that it can increase the + limit beyond the PNG_USER_WIDTH|HEIGHT_MAX; previously it could only + reduce it. + Make the 16-to-8 scaling accurate. Dividing by 256 with no rounding is + wrong (high by one) 25% of the time. Dividing by 257 with rounding is + wrong in 128 out of 65536 cases. Getting the right answer all the time + without division is easy. + Added "_SUPPORTED" to the PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION macro. + Added projects/owatcom, an IDE project for OpenWatcom to replace + scripts/makefile.watcom. This project works with OpenWatcom 1.9. The + IDE autogenerates appropriate makefiles (libpng.mk) for batch processing. + The project is configurable, unlike the Visual Studio project, so long + as the developer has an awk. + Changed png_set_gAMA to limit the gamma value range so that the inverse + of the stored value cannot overflow the fixed point representation, + and changed other things OpenWatcom warns about. + Revised pngvalid.c to test PNG_ALPHA_MODE_SUPPORTED correctly. This allows + pngvalid to build when ALPHA_MODE is not supported, which is required if + it is to build on libpng 1.4. + Removed string/memory macros that are no longer used and are not + necessarily fully supportable, particularly png_strncpy and png_snprintf. + Added log option to pngvalid.c and attempted to improve gamma messages. + +Version 1.5.3 [omitted] + People found the presence of a beta release following an rc release + to be confusing; therefore we bump the version to libpng-1.5.4beta01 + and there will be no libpng-1.5.3 release. + +Version 1.5.4beta01 [June 14, 2011] + Made it possible to undefine PNG_READ_16_TO_8_ACCURATE_SCALE_SUPPORTED + to get the same (inaccurate) output as libpng-1.5.2 and earlier. + Moved definitions of PNG_HAVE_IHDR, PNG_AFTER_IDAT, and PNG_HAVE_PLTE + outside of an unknown-chunk block in png.h because they are also + needed for other uses. + +Version 1.5.4beta02 [June 14, 2011] + Fixed and clarified LEGACY 16-to-8 scaling code. + Added png_set_chop_16() API, to match inaccurate results from previous + libpng versions. + Removed the ACCURATE and LEGACY options (they are no longer useable) + Use the old scaling method for background if png_set_chop_16() was + called. + Made png_set_chop_16() API removeable by disabling PNG_CHOP_16_TO_8_SUPPORTED + +Version 1.5.4beta03 [June 15, 2011] + Fixed a problem in png_do_expand_palette() exposed by optimization in + 1.5.3beta06 + Also removed a spurious and confusing "trans" member ("trans") from png_info. + The palette expand optimization prevented expansion to an intermediate RGBA + form if tRNS was present but alpha was marked to be stripped; this exposed + a check for tRNS in png_do_expand_palette() which is inconsistent with the + code elsewhere in libpng. + Correction to the expand_16 code; removed extra instance of + png_set_scale_16_to_8 from pngpriv.h + +Version 1.5.4beta04 [June 16, 2011] + Added a missing "#ifdef PNG_READ_BACKGROUND_SUPPORTED/#endif" in pngrtran.c + Added PNG_TRANSFORM_CHOP_16 to the high-level read transforms. + Made PNG_READ_16_TO_8_ACCURATE_SCALE configurable again. If this is + not enabled, png_set_strip_16() and png_do_scale_16_to_8() aren't built. + Revised contrib/visupng, gregbook, and pngminim to demonstrate chop_16_to_8 + +Version 1.5.4beta05 [June 16, 2011] + Renamed png_set_strip_16() to png_set_scale_16() and renamed + png_set_chop_16() to png_set_strip(16) in an attempt to minimize the + behavior changes between libpng14 and libpng15. + +Version 1.5.4beta06 [June 18, 2011] + Fixed new bug that was causing both strip_16 and scale_16 to be applied. + +Version 1.5.4beta07 [June 19, 2011] + Fixed pngvalid, simplified macros, added checking for 0 in sCAL. + The ACCURATE scale macro is no longer defined in 1.5 - call the + png_scale_16_to_8 API. Made sure that PNG_READ_16_TO_8 is still defined + if the png_strip_16_to_8 API is present. png_check_fp_number now + maintains some state so that positive, negative and zero values are + identified. sCAL uses these to be strictly spec conformant. + +Version 1.5.4beta08 [June 23, 2011] + Fixed pngvalid if ACCURATE_SCALE is defined. + Updated scripts/pnglibconf.h.prebuilt. + +Version 1.5.4rc01 [June 30, 2011] + Define PNG_ALLOCATED to "restrict" only if MSC_VER >= 1400. + +Version 1.5.4 [July 7, 2011] + No changes. + +Version 1.5.5beta01 [July 13, 2011] + Fixed some typos and made other minor changes in the manual. + Updated contrib/pngminus/makefile.std (Samuli Souminen) + +Version 1.5.5beta02 [July 14, 2011] + Revised Makefile.am and Makefile.in to look in the right directory for + pnglibconf.h.prebuilt + +Version 1.5.5beta03 [July 27, 2011] + Enabled compilation with g++ compiler. This compiler does not recognize + the file extension, so it always compiles with C++ rules. Made minor + changes to pngrutil.c to cast results where C++ expects it but C does not. + Minor editing of libpng.3 and libpng-manual.txt. + +Version 1.5.5beta04 [July 29, 2011] + Revised CMakeLists.txt (Clifford Yapp) + Updated commentary about the png_rgb_to_gray() default coefficients + in the manual and in pngrtran.c + +Version 1.5.5beta05 [August 17, 2011] + Prevent unexpected API exports from non-libpng DLLs on Windows. The "_DLL" + is removed from the test of whether a DLL is being built (this erroneously + caused the libpng APIs to be marked as DLL exports in static builds under + Microsoft Visual Studio). Almost all of the libpng building configuration + is moved from pngconf.h to pngpriv.h, but PNG_DLL_EXPORT remains in + pngconf.h, though, so that it is colocated with the import definition (it + is no longer used anywhere in the installed headers). The VStudio project + definitions have been cleaned up: "_USRDLL" has been removed from the + static library builds (this was incorrect), and PNG_USE_DLL has been added + to pngvalid to test the functionality (pngtest does not supply it, + deliberately). The spurious "_EXPORTS" has been removed from the + libpng build (all these errors were a result of copy/paste between project + configurations.) + Added new types and internal functions for CIE RGB end point handling to + pngpriv.h (functions yet to be implemented). + +Version 1.5.5beta06 [August 26, 2011] + Ensure the CMAKE_LIBRARY_OUTPUT_DIRECTORY is set in CMakeLists.txt + (Clifford Yap) + Fixes to rgb_to_gray and cHRM XYZ APIs (John Bowler): + The rgb_to_gray code had errors when combined with gamma correction. + Some pixels were treated as true grey when they weren't and such pixels + and true grey ones were not gamma corrected (the original value of the + red component was used instead). APIs to get and set cHRM using color + space end points have been added and the rgb_to_gray code that defaults + based on cHRM, and the divide-by-zero bug in png_handle_cHRM (CERT + VU#477046, CVE-2011-3328, introduced in 1.5.4) have been corrected. + A considerable number of tests has been added to pngvalid for the + rgb_to_gray transform. + Arithmetic errors in rgb_to_gray whereby the calculated gray value was + truncated to the bit depth rather than rounded have been fixed except in + the 8-bit non-gamma-corrected case (where consistency seems more important + than correctness.) The code still has considerable inaccuracies in the + 8-bit case because 8-bit linear arithmetic is used. + +Version 1.5.5beta07 [September 7, 2011] + Added "$(ARCH)" option to makefile.darwin + Added SunOS support to configure.ac and Makefile.am + Changed png_chunk_benign_error() to png_warning() in png.c, in + png_XYZ_from_xy_checked(). + +Version 1.5.5beta08 [September 10, 2011] + Fixed 64-bit compilation errors (gcc). The errors fixed relate + to conditions where types that are 32 bits in the GCC 32-bit + world (uLong and png_size_t) become 64 bits in the 64-bit + world. This produces potential truncation errors which the + compiler correctly flags. + Relocated new HAVE_SOLARIS_LD definition in configure.ac + Constant changes for 64-bit compatibility (removal of L suffixes). The + 16-bit cases still use "L" as we don't have a 16-bit test system. + +Version 1.5.5rc01 [September 15, 2011] + Removed "L" suffixes in pngpriv.h + +Version 1.5.5 [September 22, 2011] + No changes. + +Version 1.5.6beta01 [September 22, 2011] + Fixed some 64-bit type conversion warnings in pngrtran.c + Moved row_info from png_struct to a local variable. + The various interlace mask arrays have been made into arrays of + bytes and made PNG_CONST and static (previously some arrays were + marked PNG_CONST and some weren't). + Additional checks have been added to the transform code to validate the + pixel depths after the transforms on both read and write. + Removed some redundant code from pngwrite.c, in png_destroy_write_struct(). + Changed chunk reading/writing code to use png_uint_32 instead of png_byte[4]. + This removes the need to allocate temporary strings for chunk names on + the stack in the read/write code. Unknown chunk handling still uses the + string form because this is exposed in the API. + +Version 1.5.6beta02 [September 26, 2011] + Added a note in the manual the png_read_update_info() must be called only + once with a particular info_ptr. + Fixed a typo in the definition of the new PNG_STRING_FROM_CHUNK(s,c) macro. + +Version 1.5.6beta03 [September 28, 2011] + Revised test-pngtest.sh to report FAIL when pngtest fails. + Added "--strict" option to pngtest, to report FAIL when the failure is + only because the resulting valid files are different. + Revised CMakeLists.txt to work with mingw and removed some material from + CMakeLists.txt that is no longer useful in libpng-1.5. + +Version 1.5.6beta04 [October 5, 2011] + Fixed typo in Makefile.in and Makefile.am ("-M Wl" should be "-M -Wl")." + +Version 1.5.6beta05 [October 12, 2011] + Speed up png_combine_row() for interlaced images. This reduces the generality + of the code, allowing it to be optimized for Adam7 interlace. The masks + passed to png_combine_row() are now generated internally, avoiding + some code duplication and localizing the interlace handling somewhat. + Align png_struct::row_buf - previously it was always unaligned, caused by + a bug in the code that attempted to align it; the code needs to subtract + one from the pointer to take account of the filter byte prepended to + each row. + Optimized png_combine_row() when rows are aligned. This gains a small + percentage for 16-bit and 32-bit pixels in the typical case where the + output row buffers are appropriately aligned. The optimization was not + previously possible because the png_struct buffer was always misaligned. + Fixed bug in png_write_chunk_header() debug print, introduced in 1.5.6beta01. + +Version 1.5.6beta06 [October 17, 2011] + Removed two redundant tests for unitialized row. + Fixed a relatively harmless memory overwrite in compressed text writing + with a 1 byte zlib buffer. + Add ability to call png_read_update_info multiple times to pngvalid.c. + Fixes for multiple calls to png_read_update_info. These fixes attend to + most of the errors revealed in pngvalid, however doing the gamma work + twice results in inaccuracies that can't be easily fixed. There is now + a warning in the code if this is going to happen. + Turned on multiple png_read_update_info in pngvalid transform tests. + Prevent libpng from overwriting unused bits at the end of the image when + it is not byte aligned, while reading. Prior to libpng-1.5.6 libpng would + overwrite the partial byte at the end of each row if the row width was not + an exact multiple of 8 bits and the image is not interlaced. + +Version 1.5.6beta07 [October 21, 2011] + Made png_ptr->prev_row an aligned pointer into png_ptr->big_prev_row + (Mans Rullgard). + +Version 1.5.6rc01 [October 26, 2011] + Changed misleading "Missing PLTE before cHRM" warning to "Out of place cHRM" + +Version 1.5.6rc02 [October 27, 2011] + Added LSR() macro to defend against buggy compilers that evaluate non-taken + code branches and complain about out-of-range shifts. + +Version 1.5.6rc03 [October 28, 2011] + Renamed the LSR() macro to PNG_LSR() and added PNG_LSL() macro. + Fixed compiler warnings with Intel and MSYS compilers. The logical shift + fix for Microsoft Visual C is required by other compilers, so this + enables that fix for all compilers when using compile-time constants. + Under MSYS 'byte' is a name declared in a system header file, so we + changed the name of a local variable to avoid the warnings that result. + Added #define PNG_ALIGN_TYPE PNG_ALIGN_NONE to contrib/pngminim/*/pngusr.h + +Version 1.5.6 [November 3, 2011] + No changes. + +Version 1.5.7beta01 [November 4, 2011] + Added support for ARM processor, when decoding all PNG up-filtered rows + and any other-filtered rows with 3 or 4 bytes per pixel (Mans Rullgard). + Fixed bug in pngvalid on early allocation failure; fixed type cast in + pngmem.c; pngvalid would attempt to call png_error() if the allocation + of a png_struct or png_info failed. This would probably have led to a + crash. The pngmem.c implementation of png_malloc() included a cast + to png_size_t which would fail on large allocations on 16-bit systems. + Fix for the preprocessor of the Intel C compiler. The preprocessor + splits adjacent @ signs with a space; this changes the concatentation + token from @-@-@ to PNG_JOIN; that should work with all compiler + preprocessors. + Paeth filter speed improvements from work by Siarhei Siamashka. This + changes the 'Paeth' reconstruction function to improve the GCC code + generation on x86. The changes are only part of the suggested ones; + just the changes that definitely improve speed and remain simple. + The changes also slightly increase the clarity of the code. + +Version 1.5.7beta02 [November 11, 2011] + Check compression_type parameter in png_get_iCCP and remove spurious + casts. The compression_type parameter is always assigned to, so must + be non-NULL. The cast of the profile length potentially truncated the + value unnecessarily on a 16-bit int system, so the cast of the (byte) + compression type to (int) is specified by ANSI-C anyway. + Fixed FP division by zero in pngvalid.c; the 'test_pixel' code left + the sBIT fields in the test pixel as 0, which resulted in a floating + point division by zero which was irrelevant but causes systems where + FP exceptions cause a crash. Added code to pngvalid to turn on FP + exceptions if the appropriate glibc support is there to ensure this is + tested in the future. + Updated scripts/pnglibconf.mak and scripts/makefile.std to handle the + new PNG_JOIN macro. + Added versioning to pnglibconf.h comments. + Simplified read/write API initial version; basic read/write tested on + a variety of images, limited documentation (in the header file.) + Installed more accurate linear to sRGB conversion tables. The slightly + modified tables reduce the number of 16-bit values that + convert to an off-by-one 8-bit value. The "makesRGB.c" code that was used + to generate the tables is now in a contrib/sRGBtables sub-directory. + +Version 1.5.7beta03 [November 17, 2011] + Removed PNG_CONST from the sRGB table declarations in pngpriv.h and png.c + Added run-time detection of NEON support. + Added contrib/libtests; includes simplified API test and timing test and + a color conversion utility for rapid checking of failed 'pngstest' results. + Multiple transform bug fixes plus a work-round for double gamma correction. + libpng does not support more than one transform that requires linear data + at once - if this is tried typically the results is double gamma + correction. Since the simplified APIs can need rgb to gray combined with + a compose operation it is necessary to do one of these outside the main + libpng transform code. This check-in also contains fixes to various bugs + in the simplified APIs themselves and to some bugs in compose and rgb to + gray (on palette) itself. + Fixes for C++ compilation using g++ When libpng source is compiled + using g++. The compiler imposes C++ rules on the C source; thus it + is desireable to make the source work with either C or C++ rules + without throwing away useful error information. This change adds + png_voidcast to allow C semantic (void*) cases or the corresponding + C++ static_cast operation, as appropriate. + Added --noexecstack to assembler file compilation. GCC does not set + this on assembler compilation, even though it does on C compilation. + This creates security issues if assembler code is enabled; the + work-around is to set it by default in the flags for $(CCAS) + Work around compilers that don't support declaration of const data. Some + compilers fault 'extern const' data declarations (because the data is + not initialized); this turns on const-ness only for compilers where + this is known to work. + +Version 1.5.7beta04 [November 17, 2011] + Since the gcc driver does not recognize the --noexecstack flag, we must + use the -Wa prefix to have it passed through to the assembler. + Also removed a duplicate setting of this flag. + Added files that were omitted from the libpng-1.5.7beta03 zip distribution. + +Version 1.5.7beta05 [November 25, 2011] + Removed "zTXt" from warning in generic chunk decompression function. + Validate time settings passed to pngset() and png_convert_to_rfc1123() + (Frank Busse). + Added MINGW support to CMakeLists.txt + Reject invalid compression flag or method when reading the iTXt chunk. + Backed out 'simplified' API changes. The API seems too complex and there + is a lack of consensus or enthusiasm for the proposals. The API also + reveals significant bugs inside libpng (double gamma correction and the + known bug of being unable to retrieve a corrected palette). It seems + better to wait until the bugs, at least, are corrected. + Moved pngvalid.c into contrib/libtests + Rebuilt Makefile.in, configure, etc., with autoconf-2.68 + +Version 1.5.7rc01 [December 1, 2011] + Replaced an "#if" with "#ifdef" in pngrtran.c + Revised #if PNG_DO_BC block in png.c (use #ifdef and add #else) + +Version 1.5.7rc02 [December 5, 2011] + Revised project files and contrib/pngvalid/pngvalid.c to account for + the relocation of pngvalid into contrib/libtests. + Revised pngconf.h to use " __declspec(restrict)" only when MSC_VER >= 1400, + as in libpng-1.5.4. + Put CRLF line endings in the owatcom project files. + +Version 1.5.7rc03 [December 7, 2011] + Updated CMakeLists.txt to account for the relocation of pngvalid.c + +Version 1.5.7 [December 15, 2011] + Minor fixes to pngvalid.c for gcc 4.6.2 compatibility to remove warnings + reported by earlier versions. + Fixed minor memset/sizeof errors in pngvalid.c. + +Version 1.6.0beta01 [December 15, 2011] + Removed machine-generated configure files from the GIT repository (they will + continue to appear in the tarball distributions and in the libpng15 and + earlier GIT branches). + Restored the new 'simplified' API, which was started in libpng-1.5.7beta02 + but later deleted from libpng-1.5.7beta05. + Added example programs for the new 'simplified' API. + Added ANSI-C (C90) headers and require them, and take advantage of the + change. Also fixed some of the projects/* and contrib/* files that needed + updates for libpng16 and the move of pngvalid.c. + With this change the required ANSI-C header files are assumed to exist: the + implementation must provide float.h, limits.h, stdarg.h and stddef.h and + libpng relies on limits.h and stddef.h existing and behaving as defined + (the other two required headers aren't used). Non-ANSI systems that don't + have stddef.h or limits.h will have to provide an appropriate fake + containing the relevant types and #defines. + The use of FAR/far has been eliminated and the definition of png_alloc_size_t + is now controlled by a flag so that 'small size_t' systems can select it + if necessary. Libpng 1.6 may not currently work on such systems -- it + seems likely that it will ask 'malloc' for more than 65535 bytes with any + image that has a sufficiently large row size (rather than simply failing + to read such images). + New tools directory containing tools used to generate libpng code. + Fixed race conditions in parallel make builds. With higher degrees of + parallelism during 'make' the use of the same temporary file names such + as 'dfn*' can result in a race where a temporary file from one arm of the + build is deleted or overwritten in another arm. This changes the + temporary files for suffix rules to always use $* and ensures that the + non-suffix rules use unique file names. + +Version 1.6.0beta02 [December 21, 2011] + Correct configure builds where build and source directories are separate. + The include path of 'config.h' was erroneously made relative in pngvalid.c + in libpng 1.5.7. + +Version 1.6.0beta03 [December 22, 2011] + Start-up code size improvements, error handler flexibility. These changes + alter how the tricky allocation of the initial png_struct and png_info + structures are handled. png_info is now handled in pretty much the same + way as everything else, except that the allocations handle NULL return + silently. png_struct is changed in a similar way on allocation and on + deallocation a 'safety' error handler is put in place (which should never + be required). The error handler itself is changed to permit mismatches + in the application and libpng error buffer size; however, this means a + silent change to the API to return the jmp_buf if the size doesn't match + the size from the libpng compilation; libpng now allocates the memory and + this may fail. Overall these changes result in slight code size + reductions; however, this is a reduction in code that is always executed + so is particularly valuable. Overall on a 64-bit system the libpng DLL + decreases in code size by 1733 bytes. pngerror.o increases in size by + about 465 bytes because of the new functionality. + Added png_convert_to_rfc1123_buffer() and deprecated png_convert_to_rfc1123() + to avoid including a spurious buffer in the png_struct. + +Version 1.6.0beta04 [December 30, 2011] + Regenerated configure scripts with automake-1.11.2 + Eliminated png_info_destroy(). It is now used only in png.c and only calls + one other internal function and memset(). + Enabled png_get_sCAL_fixed() if floating point APIs are enabled. Previously + it was disabled whenever internal fixed point arithmetic was selected, + which meant it didn't exist even on systems where FP was available but not + preferred. + Added pngvalid.c compile time checks for const APIs. + Implemented 'restrict' for png_info and png_struct. Because of the way + libpng works both png_info and png_struct are always accessed via a + single pointer. This means adding C99 'restrict' to the pointer gives + the compiler some opportunity to optimize the code. This change allows + that. + Moved AC_MSG_CHECKING([if libraries can be versioned]) later to the proper + location in configure.ac (Gilles Espinasse). + Changed png_memcpy to C assignment where appropriate. Changed all those + uses of png_memcpy that were doing a simple assignment to assignments + (all those cases where the thing being copied is a non-array C L-value). + Added some error checking to png_set_*() routines. + Removed the reference to the non-exported function png_memcpy() from + example.c. + Fixed the Visual C 64-bit build - it requires jmp_buf to be aligned, but + it had become misaligned. + Revised contrib/pngminus/pnm2png.c to avoid warnings when png_uint_32 + and unsigned long are of different sizes. + +Version 1.6.0beta05 [January 15, 2012] + Updated manual with description of the simplified API (copied from png.h) + Fix bug in pngerror.c: some long warnings were being improperly truncated + (CVE-2011-3464, bug introduced in libpng-1.5.3beta05). + +Version 1.6.0beta06 [January 24, 2012] + Added palette support to the simplified APIs. This commit + changes some of the macro definitions in png.h, app code + may need corresponding changes. + Increased the formatted warning buffer to 192 bytes. + Added color-map support to simplified API. This is an initial version for + review; the documentation has not yet been updated. + Fixed Min/GW uninstall to remove libpng.dll.a + +Version 1.6.0beta07 [January 28, 2012] + Eliminated Intel icc/icl compiler warnings. The Intel (GCC derived) + compiler issues slightly different warnings from those issued by the + current vesions of GCC. This eliminates those warnings by + adding/removing casts and small code rewrites. + Updated configure.ac from autoupdate: added --enable-werror option. + Also some layout regularization and removal of introduced tab characters + (replaced with 3-character indentation). Obsolete macros identified by + autoupdate have been removed; the replacements are all in 2.59 so + the pre-req hasn't been changed. --enable-werror checks for support + for -Werror (or the given argument) in the compiler. This mimics the + gcc configure option by allowing -Werror to be turned on safely; without + the option the tests written in configure itself fail compilation because + they cause compiler warnings. + Rewrote autogen.sh to run autoreconf instead of running tools one-by-one. + Conditionalize the install rules for MINGW and CYGWIN in CMakeLists.txt and + set CMAKE_LIBRARY_OUTPUT_DIRECTORY to "lib" on all platforms (C. Yapp). + Freeze libtool files in the 'scripts' directory. This version of autogen.sh + attempts to dissuade people from running it when it is not, or should not, + be necessary. In fact, autogen.sh does not work when run in a libpng + directory extracted from a tar distribution anymore. You must run it in + a GIT clone instead. + Added two images to contrib/pngsuite (1-bit and 2-bit transparent grayscale), + and renamed three whose names were inconsistent with those in + pngsuite/README.txt. + +Version 1.6.0beta08 [February 1, 2012] + Fixed Image::colormap misalignment in pngstest.c + Check libtool/libtoolize version number (2.4.2) in configure.ac + Divide test-pngstest.sh into separate pngstest runs for basic and + transparent images. + Moved automake options to AM_INIT_AUTOMAKE in configure.ac + Added color-tests, silent-rules (Not yet implemented in Makefile.am) and + version checking to configure.ac + Improved pngstest speed by not doing redundant tests and add const to + the background parameter of png_image_finish_read. The --background + option is now done automagically only when required, so that commandline + option no longer exists. + Cleaned up pngpriv.h to consistently declare all functions and data. + Also eliminated PNG_CONST_DATA, which is apparently not needed but we + can't be sure until it is gone. + Added symbol prefixing that allows all the libpng external symbols + to be prefixed (suggested by Reuben Hawkins). + Updated "ftbb*.png" list in the owatcom and vstudio projects. + Fixed 'prefix' builds on clean systems. The generation of pngprefix.h + should not require itself. + Updated INSTALL to explain that autogen.sh must be run in a GIT clone, + not in a libpng directory extracted from a tar distribution. + +Version 1.6.0beta09 [February 1, 2012] + Reverted the prebuilt configure files to libpng-1.6.0beta05 condition. + +Version 1.6.0beta10 [February 3, 2012] + Added Z_SOLO for zlib-1.2.6+ and correct pngstest tests + Updated list of test images in CMakeLists.txt + Updated the prebuilt configure files to current condition. + Revised INSTALL information about autogen.sh; it works in tar distributions. + +Version 1.6.0beta11 [February 16, 2012] + Fix character count in pngstest command in projects/owatcom/pngstest.tgt + Revised test-pngstest.sh to report PASS/FAIL for each image. + Updated documentation about the simplified API. + Corrected estimate of error in libpng png_set_rgb_to_gray API. The API is + extremely inaccurate for sRGB conversions because it uses an 8-bit + intermediate linear value and it does not use the sRGB transform, so it + suffers from the known instability in gamma transforms for values close + to 0 (see Poynton). The net result is that the calculation has a maximum + error of 14.99/255; 0.5/255^(1/2.2). pngstest now uses 15 for the + permitted 8-bit error. This may still not be enough because of arithmetic + error. + Removed some unused arrays (with #ifdef) from png_read_push_finish_row(). + Fixed a memory overwrite bug in simplified read of RGB PNG with + non-linear gamma Also bugs in the error checking in pngread.c and changed + quite a lot of the checks in pngstest.c to be correct; either correctly + written or not over-optimistic. The pngstest changes are insufficient to + allow all possible RGB transforms to be passed; pngstest cmppixel needs + to be rewritten to make it clearer which errors it allows and then changed + to permit known inaccuracies. + Removed tests for no-longer-used *_EMPTY_PLTE_SUPPORTED from pngstruct.h + Fixed fixed/float API export conditionals. 1) If FIXED_POINT or + FLOATING_POINT options were switched off, png.h ended up with lone ';' + characters. This is not valid ANSI-C outside a function. The ';' + characters have been moved inside the definition of PNG_FP_EXPORT and + PNG_FIXED_EXPORT. 2) If either option was switched off, the declaration + of the corresponding functions were completely omitted, even though some + of them are still used internally. The result is still valid, but + produces warnings from gcc with some warning options (including -Wall). The + fix is to cause png.h to declare the functions with PNG_INTERNAL_FUNCTION + when png.h is included from pngpriv.h. + Check for invalid palette index while reading paletted PNG. When one is + found, issue a warning and increase png_ptr->num_palette accordingly. + Apps are responsible for checking to see if that happened. + +Version 1.6.0beta12 [February 18, 2012] + Do not increase num_palette on invalid_index. + Relocated check for invalid palette index to pngrtran.c, after unpacking + the sub-8-bit pixels. + Fixed CVE-2011-3026 buffer overrun bug. This bug was introduced when + iCCP chunk support was added at libpng-1.0.6. Deal more correctly with the + test on iCCP chunk length. Also removed spurious casts that may hide + problems on 16-bit systems. + +Version 1.6.0beta13 [February 24, 2012] + Eliminated redundant png_push_read_tEXt|zTXt|iTXt|unknown code from + pngpread.c and use the sequential png_handle_tEXt, etc., in pngrutil.c; + now that png_ptr->buffer is inaccessible to applications, the special + handling is no longer useful. + Added PNG_SAFE_LIMITS feature to pnglibconf.dfa, pngpriv.h, and new + pngusr.dfa to reset the user limits to safe ones if PNG_SAFE_LIMITS is + defined. To enable, use "CPPFLAGS=-DPNG_SAFE_LIMITS_SUPPORTED=1" on the + configure command or put #define PNG_SAFE_LIMITS_SUPPORTED in + pnglibconf.h.prebuilt and pnglibconf.h. + +Version 1.6.0beta14 [February 27, 2012] + Added information about the new limits in the manual. + Updated Makefile.in + +Version 1.6.0beta15 [March 2, 2012] + Removed unused "current_text" members of png_struct and the png_free() + of png_ptr->current_text from pngread.c + Rewrote pngstest.c for substantial speed improvement. + Fixed transparent pixel and 16-bit rgb tests in pngstest and removed a + spurious check in pngwrite.c + Added PNG_IMAGE_FLAG_FAST for the benefit of applications that store + intermediate files, or intermediate in-memory data, while processing + image data with the simplified API. The option makes the files larger + but faster to write and read. pngstest now uses this by default; this + can be disabled with the --slow option. + Improved pngstest fine tuning of error numbers, new test file generator. + The generator generates images that test the full range of sample values, + allow the error numbers in pngstest to be tuned and checked. makepng + also allows generation of images with extra chunks, although this is + still work-in-progress. + Added check for invalid palette index while reading. + Fixed some bugs in ICC profile writing. The code should now accept + all potentially valid ICC profiles and reject obviously invalid ones. + It now uses png_error() to do so rather than casually writing a PNG + without the necessary color data. + Removed whitespace from the end of lines in all source files and scripts. + +Version 1.6.0beta16 [March 6, 2012] + Relocated palette-index checking function from pngrutil.c to pngtrans.c + Added palette-index checking while writing. + Changed png_inflate() and calling routines to avoid overflow problems. + This is an intermediate check-in that solves the immediate problems and + introduces one performance improvement (avoiding a copy via png_ptr->zbuf.) + Further changes will be made to make ICC profile handling more secure. + Fixed build warnings (MSVC, GCC, GCC v3). Cygwin GCC with default options + declares 'index' as a global, causing a warning if it is used as a local + variable. GCC 64-bit warns about assigning a (size_t) (unsigned 64-bit) + to an (int) (signed 32-bit). MSVC, however, warns about using the + unary '-' operator on an unsigned value (even though it is well defined + by ANSI-C to be ~x+1). The padding calculation was changed to use a + different method. Removed the tests on png_ptr->pass. + Added contrib/libtests/tarith.c to test internal arithmetic functions from + png.c. This is a libpng maintainer program used to validate changes to the + internal arithmetic functions. + Made read 'inflate' handling like write 'deflate' handling. The read + code now claims and releases png_ptr->zstream, like the write code. + The bug whereby the progressive reader failed to release the zstream + is now fixed, all initialization is delayed, and the code checks for + changed parameters on deflate rather than always calling + deflatedEnd/deflateInit. + Validate the zTXt strings in pngvalid. + Added code to validate the windowBits value passed to deflateInit2(). + If the call to deflateInit2() is wrong a png_warning will be issued + (in fact this is harmless, but the PNG data produced may be sub-optimal). + +Version 1.6.0beta17 [March 10, 2012] + Fixed PNG_LIBPNG_BUILD_BASE_TYPE definition. + Reject all iCCP chunks after the first, even if the first one is invalid. + Deflate/inflate was reworked to move common zlib calls into single + functions [rw]util.c. A new shared keyword check routine was also added + and the 'zbuf' is no longer allocated on progressive read. It is now + possible to call png_inflate() incrementally. + If benign errors are disabled use maximum window on ancilliary inflate. + This works round a bug introduced in 1.5.4 where compressed ancillary + chunks could end up with a too-small windowBits value in the deflate + header. + +Version 1.6.0beta18 [March 16, 2012] + Issue a png_benign_error() instead of png_warning() about bad palette index. + In pngtest, treat benign errors as errors if "-strict" is present. + Fixed an off-by-one error in the palette index checking function. + Fixed a compiler warning under Cygwin (Windows-7, 32-bit system) + Revised example.c to put text strings in a temporary character array + instead of directly assigning string constants to png_textp members. + This avoids compiler warnings when -Wwrite-strings is enabled. + Added output flushing to aid debugging under Visual Studio. Unfortunately + this is necessary because the VS2010 output window otherwise simply loses + the error messages on error (they weren't flushed to the window before + the process exited, apparently!) + Added configuration support for benign errors and changed the read + default. Also changed some warnings in the iCCP and sRGB handling + from to benign errors. Configuration now makes read benign + errors warnings and write benign errors to errors by default (thus + changing the behavior on read). The simplified API always forces + read benign errors to warnings (regardless of the system default, unless + this is disabled in which case the simplified API can't be built.) + +Version 1.6.0beta19 [March 18, 2012] + Work around for duplicate row start calls; added warning messages. + This turns on PNG_FLAG_DETECT_UNINITIALIZED to detect app code that + fails to call one of the 'start' routines (not enabled in libpng-1.5 + because it is technically an API change, since it did normally work + before.) It also makes duplicate calls to png_read_start_row (an + internal function called at the start of the image read) benign, as + they were before changes to use png_inflate_claim. Somehow webkit is + causing this to happen; this is probably a mis-feature in the zlib + changes so this commit is only a work-round. + Removed erroneous setting of DETECT_UNINITIALIZED and added more + checks. The code now does a png_error if an attempt is made to do the + row initialization twice; this is an application error and it has + serious consequences because the transform data in png_struct is + changed by each call. + Added application error reporting and added chunk names to read + benign errors; also added --strict to pngstest - not enabled + yet because a warning is produced. + Avoid the double gamma correction warning in the simplified API. + This allows the --strict option to pass in the pngstest checks + +Version 1.6.0beta20 [March 29, 2012] + Changed chunk handler warnings into benign errors, incrementally load iCCP + Added checksum-icc.c to contrib/tools + Prevent PNG_EXPAND+PNG_SHIFT doing the shift twice. + Recognize known sRGB ICC profiles while reading; prefer writing the + iCCP profile over writing the sRGB chunk, controlled by the + PNG_sRGB_PROFILE_CHECKS option. + Revised png_set_text_2() to avoid potential memory corruption (fixes + CVE-2011-3048, also known as CVE-2012-3425). + +Version 1.6.0beta21 [April 27, 2012] + Revised scripts/makefile.darwin: use system zlib; remove quotes around + architecture list; add missing ppc architecture; add architecture options + to shared library link; don't try to create a shared lib based on missing + RELEASE variable. + Enable png_set_check_for_invalid_index() for both read and write. + Removed #ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED in pngpriv.h around + declaration of png_handle_unknown(). + Added -lssp_nonshared in a comment in scripts/makefile.freebsd + and changed deprecated NOOBJ and NOPROFILE to NO_OBJ and NO_PROFILE. + +Version 1.6.0beta22 [May 23, 2012] + Removed need for -Wno-cast-align with clang. clang correctly warns on + alignment increasing pointer casts when -Wcast-align is passed. This + fixes the cases that clang warns about either by eliminating the + casts from png_bytep to png_uint_16p (pngread.c), or, for pngrutil.c + where the cast is previously verified or pngstest.c where it is OK, by + introducing new png_aligncast macros to do the cast in a way that clang + accepts. + +Version 1.6.0beta23 [June 6, 2012] + Revised CMakeLists.txt to not attempt to make a symlink under mingw. + Made fixes for new optimization warnings from gcc 4.7.0. The compiler + performs an optimization which is safe; however it then warns about it. + Changing the type of 'palette_number' in pngvalid.c removes the warning. + Do not depend upon a GCC feature macro being available for use in generating + the linker mapfile symbol prefix. + Improved performance of new do_check_palette_indexes() function (only + update the value when it actually increases, move test for whether + the check is wanted out of the function. + +Version 1.6.0beta24 [June 7, 2012] + Don't check palette indexes if num_palette is 0 (as it can be in MNG files). + +Version 1.6.0beta25 [June 16, 2012] + Revised png_set_keep_unknown_chunks() so num_chunks < 0 means ignore all + unknown chunks and all known chunks except for IHDR, PLTE, tRNS, IDAT, + and IEND. Previously it only meant ignore all unknown chunks, the + same as num_chunks == 0. Revised png_image_skip_unused_chunks() to + provide a list of chunks to be processed instead of a list of chunks to + ignore. Revised contrib/gregbook/readpng2.c accordingly. + +Version 1.6.0beta26 [July 10, 2012] + Removed scripts/makefile.cegcc from the *.zip and *.7z distributions; it + depends on configure, which is not included in those archives. + Moved scripts/chkfmt to contrib/tools. + Changed "a+w" to "u+w" in Makefile.in to fix CVE-2012-3386. + +Version 1.6.0beta27 [August 11, 2012] + Do not compile PNG_DEPRECATED, PNG_ALLOC and PNG_PRIVATE when __GNUC__ < 3. + Do not use __restrict when GNUC is <= 3.1 + Removed references to png_zalloc() and png_zfree() from the manual. + Fixed configurations where floating point is completely disabled. Because + of the changes to support symbol prefixing PNG_INTERNAL_FUNCTION declares + floating point APIs during libpng builds even if they are completely + disabled. This requires the png floating point types (png_double*) to be + declared even though the functions are never actually defined. This + change provides a dummy definition so that the declarations work, yet any + implementation will fail to compile because of an incomplete type. + Re-eliminated the use of strcpy() in pngtest.c. An unncessary use of + strcpy() was accidentally re-introduced in libpng16; this change replaces + it with strncpy(). + Eliminated use of png_sizeof(); use sizeof() instead. + Use a consistent style for (sizeof type) and (sizeof (array)) + Cleanup of png_set_filler(). This function does very different things on + read and write. In libpng 1.6 the two cases can be distinguished and + considerable code cleanup, and extra error checking, is possible. This + makes calls on the write side that have no effect be ignored with a + png_app_error(), which can be disabled in the app using + png_set_benign_errors(), and removes the spurious use of usr_channels + on the read side. + Insist on autotools 1.12.1 for git builds because there are security issues + with 1.12 and insisting on anything less would allow 1.12 to be used. + Removed info_ptr->signature[8] from WRITE-only builds. + Add some conditions for compiling png_fixed(). This is a small function + but it requires "-lm" on some platforms. + Cause pngtest --strict to fail on any warning from libpng (not just errors) + and cause it not to fail at the comparison step if libpng lacks support + for writing chunks that it reads from the input (currently only implemented + for compressed text chunks). + Make all three "make check" test programs work without READ or WRITE support. + Now "make check" will succeed even if libpng is compiled with -DPNG_NO_READ + or -DPNG_NO_WRITE. The tests performed are reduced, but the basic reading + and writing of a PNG file is always tested by one or more of the tests. + Consistently use strlen(), memset(), memcpy(), and memcmp() instead of the + png_strlen(), png_memset(), png_memcpy(), and png_memcmp() macros. + Removed the png_sizeof(), png_strlen(), png_memset(), png_memcpy(), and + png_memcmp() macros. + Work around gcc 3.x and Microsoft Visual Studio 2010 complaints. Both object + to the split initialization of num_chunks. + +Version 1.6.0beta28 [August 29, 2012] + Unknown handling fixes and clean up. This adds more correct option + control of the unknown handling, corrects the pre-existing bug where + the per-chunk 'keep' setting is ignored and makes it possible to skip + IDAT chunks in the sequential reader (broken in earlier 1.6 versions). + There is a new test program, test-unknown.c, which is a work in progress + (not currently part of the test suite). Comments in the header files now + explain how the unknown handling works. + Allow fine grain control of unknown chunk APIs. This change allows + png_set_keep_unknown_chunks() to be turned off if not required and causes + both read and write to behave appropriately (on read this is only possible + if the user callback is used to handle unknown chunks). The change + also removes the support for storing unknown chunks in the info_struct + if the only unknown handling enabled is via the callback, allowing libpng + to be configured with callback reading and none of the unnecessary code. + Corrected fix for unknown handling in pngtest. This reinstates the + libpng handling of unknown chunks other than vpAg and sTER (including + unsafe-to-copy chunks which were dropped before) and eliminates the + repositioning of vpAg and sTER in pngtest.png by changing pngtest.png + (so the chunks are where libpng would put them). + Added "tunknown" test and corrected a logic error in png_handle_unknown() + when SAVE support is absent. Moved the shell test scripts for + contrib/libtests from the libpng top directory to contrib/libtests. + png_handle_unknown() must always read or skip the chunk, if + SAVE_UNKNOWN_CHUNKS is turned off *and* the application does not set + a user callback an unknown chunk will not be read, leading to a read + error, which was revealed by the "tunknown" test. + Cleaned up and corrected ICC profile handling. + contrib/libtests/makepng: corrected 'rgb' and 'gray' cases. profile_error + messages could be truncated; made a correct buffer size calculation and + adjusted pngerror.c appropriately. png_icc_check_* checking improved; + changed the functions to receive the correct color type of the PNG on read + or write and check that it matches the color space of the profile (despite + what the comments said before, there is danger in assuming the app will + cope correctly with an RGB profile on a grayscale image and, since it + violates the PNG spec, allowing it is certain to produce inconsistent + app behavior and might even cause app crashes.) Check that profiles + contain the tags needed to process the PNG (tags all required by the ICC + spec). Removed unused PNG_STATIC from pngpriv.h. + +Version 1.6.0beta29 [September 4, 2012] + Fixed the simplified API example programs to add the *colormap parameter + to several of he API and improved the error message if the version field + is not set. + Added contrib/examples/* to the *.zip and *.7z distributions. + Updated simplified API synopses and description of the png_image structure + in the manual. + Made makepng and pngtest produce identical PNGs, add "--relaxed" option + to pngtest. The "--relaxed" option turns off the benign errors that are + enabled by default in pre-RC builds. makepng can now write ICC profiles + where the length has not been extended to a multiple of 4, and pngtest + now intercepts all libpng errors, allowing the previously-introduced + "--strict test" on no warnings to actually work. + Improved ICC profile handling including cHRM chunk generation and fixed + Cygwin+MSVC build errors. The ICC profile handling now includes more + checking. Several errors that caused rejection of the profile are now + handled with a warning in such a way that the invalid profiles will be + read by default in release (but not pre-RC) builds but will not be + written by default. The easy part of handling the cHRM chunk is written, + where the ICC profile contains the required data. The more difficult + part plus guessing a gAMA value requires code to pass selected RGB values + through the profile. + +Version 1.6.0beta30 [October 24, 2012] + Changed ICC profile matrix/vector types to not depend on array type rules. + By the ANSI-C standard the new types should be identical to the previous + versions, and all known versions of gcc tested with the previous versions + except for GCC-4.2.1 work with this version. The change makes the ANSI-C + rule that const applied to an array of elements applies instead to the + elements in the array moot by explicitly applying const to the base + elements of the png_icc_matrix and png_icc_vector types. The accidental + (harmless) 'const' previously applied to the parameters of two of the + functions have also been removed. + Added a work around for GCC 4.2 optimization bug. + Marked the broken (bad white point) original HP sRGB profiles correctly and + correct comments. + Added -DZ_SOLO to contrib/pngminim/*/makefile to work with zlib-1.2.7 + Use /MDd for vstudio debug builds. Also added pngunkown to the vstudio + builds, fixed build errors and corrected a minor exit code error in + pngvalid if the 'touch' file name is invalid. + Add updated WARNING file to projects/vstudio from libpng 1.5/vstudio + Fixed build when using #define PNG_NO_READ_GAMMA in png_do_compose() in + pngrtran.c (Domani Hannes). + +Version 1.6.0beta31 [November 1, 2012] + Undid the erroneous change to vstudio/pngvalid build in libpng-1.6.0beta30. + Made pngvalid so that it will build outside the libpng source tree. + Made builds -DPNG_NO_READ_GAMMA compile (the unit tests still fail). + Made PNG_NO_READ_GAMMA switch off interfaces that depend on READ_GAMMA. + Prior to 1.6.0 switching off READ_GAMMA did unpredictable things to the + interfaces that use it (specifically, png_do_background in 1.4 would + simply display composite for grayscale images but do composition + with the incorrect arithmetic for color ones). In 1.6 the semantic + of -DPNG_NO_READ_GAMMA is changed to simply disable any interface that + depends on it; this obliges people who set it to consider whether they + really want it off if they happen to use any of the interfaces in + question (typically most users who disable it won't). + Fixed GUIDs in projects/vstudio. Some were duplicated or missing, + resulting in VS2010 having to update the files. + Removed non-working ICC profile support code that was mostly added to + libpng-1.6.0beta29 and beta30. There was too much code for too little + gain; implementing full ICC color correction may be desireable but is left + up to applications. + +Version 1.6.0beta32 [November 25, 2012] + Fixed an intermittent SEGV in pngstest due to an uninitialized array element. + Added the ability for contrib/libtests/makepng.c to make a PNG with just one + color. This is useful for debugging pngstest color inaccuracy reports. + Fixed error checking in the simplified write API (Olaf van der Spek) + Made png_user_version_check() ok to use with libpng version 1.10.x and later. + +Version 1.6.0beta33 [December 15, 2012] + Fixed typo in png.c (PNG_SET_CHUNK_MALLOC_MAX should be PNG_CHUNK_MALLOC_MAX) + that causes the MALLOC_MAX limit not to work (John Bowler) + Change png_warning() to png_app_error() in pngwrite.c and comment the + fall-through condition. + Change png_warning() to png_app_warning() in png_write_tRNS(). + Rearranged the ARM-NEON optimizations: Isolated the machine specific code + to the hardware subdirectory and added comments to pngrutil.c so that + implementors of other optimizations know what to do. + Fixed cases of unquoted DESTDIR in Makefile.am + Rebuilt Makefile.in, etc., with autoconf-2.69 and automake-1.12.5. + +Version 1.6.0beta34 [December 19, 2012] + Cleaned up whitespace in the synopsis portion of the manpage "libpng.3" + Disassembled the version number in scripts/options.awk (necessary for + building on SunOs). + +Version 1.6.0beta35 [December 23, 2012] + Made default Zlib compression settings be configurable. This adds #defines to + pnglibconf.h to control the defaults. + Fixed Windows build issues, enabled ARM compilation. Various warnings issued + by earlier versions of GCC fixed for Cygwin and Min/GW (which both use old + GCCs.) ARM support is enabled by default in zlib.props (unsupported by + Microsoft) and ARM compilation is made possible by deleting the check for + x86. The test programs cannot be run because they are not signed. + +Version 1.6.0beta36 [January 2, 2013] + Discontinued distributing libpng-1.x.x.tar.bz2. + Discontinued distributing libpng-1.7.0-1.6.0-diff.txt and similar. + Rebuilt configure with autoconf-2.69 (inadvertently not done in beta33) + Fixed 'make distcheck' on SUN OS - libpng.so was not being removed + +Version 1.6.0beta37 [January 10, 2013] + Fixed conceivable but difficult to repro overflow. Also added two test + programs to generate and test a PNG which should have the problem. + +Version 1.6.0beta39 [January 19, 2013] + Again corrected attempt at overflow detection in png_set_unknown_chunks(). + Added overflow detection in png_set_sPLT() and png_set_text_2(). + +Version 1.6.0beta40 [January 20, 2013] + Use consistent handling of overflows in text, sPLT and unknown png_set_* APIs + +Version 1.6.0rc01 [January 26, 2013] + No changes. + +Version 1.6.0rc02 [February 4, 2013] + Added png_get_palette_max() function. + +Version 1.6.0rc03 [February 5, 2013] + Fixed the png_get_palette_max API. + +Version 1.6.0rc04 [February 7, 2013] + Turn serial tests back on (recently turned off by autotools upgrade). + +Version 1.6.0rc05 [February 8, 2013] + Update manual about png_get_palette_max(). + +Version 1.6.0rc06 [February 9, 2013] + Fixed missing dependency in --prefix builds The intermediate + internal 'prefix.h' file can only be generated correctly after + pnglibconf.h, however the dependency was not in Makefile.am. The + symptoms are unpredictable depending on the order make chooses to + build pngprefix.h and pnglibconf.h, often the error goes unnoticed + because there is a system pnglibconf.h to use instead. + +Version 1.6.0rc07 [February 10, 2013] + Enclosed the new png_get_palette_max in #ifdef PNG_GET_PALETTE_MAX_SUPPORTED + block, and revised pnglibconf.h and pnglibconf.h.prebuilt accordingly. + +Version 1.6.0rc08 [February 10, 2013] + Fix typo in png.h #ifdef + +Version 1.6.0 [February 14, 2013] + No changes. + +Version 1.6.1beta01 [February 16, 2013] + Made symbol prefixing work with the ARM neon optimizations. Also allow + pngpriv.h to be included for preprocessor definitions only, so it can + be used in non-C/C++ files. Back ported from libpng 1.7. + Made sRGB check numbers consistent. + Ported libpng 1.5 options.awk/dfn file handling to 1.6, fixed one bug. + Removed cc -E workround, corrected png_get_palette_max API Tested on + SUN OS cc 5.9, which demonstrates the tokenization problem previously + avoided by using /lib/cpp. Since all .dfn output is now protected in + double quotes unless it is to be macro substituted the fix should + work everywhere. + Enabled parallel tests - back ported from libpng-1.7. + scripts/pnglibconf.dfa formatting improvements back ported from libpng17. + Fixed a race condition in the creation of the build 'scripts' directory + while building with a parallel make. + Use approved/supported Android method to check for NEON, use Linux/POSIX + 1003.1 API to check /proc/self/auxv avoiding buffer allocation and other + library calls (ported from libpng15). + +Version 1.6.1beta02 [February 19, 2013] + Use parentheses more consistently in "#if defined(MACRO)" tests. + Folded long lines. + Reenabled code to allow zero length PLTE chunks for MNG. + +Version 1.6.1beta03 [February 22, 2013] + Fixed ALIGNED_MEMORY support. + Allow run-time ARM NEON checking to be disabled. A new configure option: + --enable-arm-neon=always will stop the run-time checks. New checks + within arm/arm_init.c will cause the code not to be compiled unless + __ARM_NEON__ is set. This should make it fail safe (if someone asks + for it on then the build will fail if it can't be done.) + Updated the INSTALL document. + +Version 1.6.1beta04 [February 27, 2013] + Revised INSTALL to recommend using CPPFLAGS instead of INCLUDES. + Revised scripts/makefile.freebsd to respect ZLIBLIB and ZLIBINC. + Revised scripts/dfn.awk to work with the buggy MSYS awk that has trouble + with CRLF line endings. + +Version 1.6.1beta05 [March 1, 2013] + Avoid a possible memory leak in contrib/gregbook/readpng.c + +Version 1.6.1beta06 [March 4, 2013] + Better documentation of unknown handling API interactions. + Corrected Android builds and corrected libpng.vers with symbol + prefixing This adds an API to set optimization options externally, + providing an alternative and general solution for the non-portable + run-time tests used by the ARM Neon code. It also makes those tests + compile and link on Android. + The order of settings vs options in pnglibconf.h is reversed to allow + settings to depend on options and options can now set (or override) the + defaults for settings. + +Version 1.6.1beta07 [March 7, 2013] + Corrected simplified API default gamma for color-mapped output, added + a flag to change default. In 1.6.0 when the simplified API was used + to produce color-mapped output from an input image with no gamma + information the gamma assumed for the input could be different from + that assumed for non-color-mapped output. In particular 16-bit depth + input files were assumed to be sRGB encoded, whereas in the 'direct' + case they were assumed to have linear data. This was an error. The + fix makes the simplified API treat all input files the same way and + adds a new flag to the png_image::flags member to allow the + application/user to specify that 16-bit files contain sRGB data + rather than the default linear. + Fixed bugs in the pngpixel and makepng test programs. + +Version 1.6.1beta08 [March 7, 2013] + Fixed CMakelists.txt to allow building a single variant of the library + (Claudio Bley): + Introduced a PNG_LIB_TARGETS variable that lists all activated library + targets. It is an error if this variable ends up empty, ie. you have + to build at least one library variant. + Made the *_COPY targets only depend on library targets actually being build. + Use PNG_LIB_TARGETS to unify a code path. + Changed the CREATE_SYMLINK macro to expect the full path to a file as the + first argument. When symlinking the filename component of that path is + determined and used as the link target. + Use copy_if_different in the CREATE_SYMLINK macro. + +Version 1.6.1beta09 [March 13, 2013] + Eliminated two warnings from the Intel C compiler. The warnings are + technically valid, although a reasonable treatment of division would + show it to be incorrect. + +Version 1.6.1rc01 [March 21, 2013] + No changes. + +Version 1.6.1 [March 28, 2013] + No changes. + +Version 1.6.2beta01 [April 14, 2013] + Updated documentation of 1.5.x to 1.6.x changes in iCCP chunk handling. + Fixed incorrect warning of excess deflate data. End condition - the + warning would be produced if the end of the deflate stream wasn't read + in the last row. The warning is harmless. + Corrected the test on user transform changes on read. It was in the + png_set of the transform function, but that doesn't matter unless the + transform function changes the rowbuf size, and that is only valid if + transform_info is called. + Corrected a misplaced closing bracket in contrib/libtests/pngvalid.c + (Flavio Medeiros). + Corrected length written to uncompressed iTXt chunks (Samuli Suominen). + +Version 1.6.2rc01 [April 18, 2013] + Added contrib/tools/fixitxt.c, to repair the erroneous iTXt chunk length + written by libpng-1.6.0 and 1.6.1. + Disallow storing sRGB information when the sRGB is not supported. + +Version 1.6.2rc02 [April 18, 2013] + Merge pngtest.c with libpng-1.7.0 + +Version 1.6.2rc03 [April 22, 2013] + Trivial spelling cleanup. + +Version 1.6.2rc04 and 1.6.2rc05 [omitted] + +Version 1.6.2rc06 [April 24, 2013] + Reverted to version 1.6.2rc03. Recent changes to arm/neon support + have been ported to libpng-1.7.0beta09 and will reappear in version + 1.6.3beta01. + +Version 1.6.2 [April 25, 2013] + +Send comments/corrections/commendations to png-mng-implement at lists.sf.net +(subscription required; visit +https://lists.sourceforge.net/lists/listinfo/png-mng-implement +to subscribe) +or to glennrp at users.sourceforge.net + +Glenn R-P +#endif diff --git a/src/SDL2/external/libpng-1.6.2/CMakeLists.txt b/src/SDL2/external/libpng-1.6.2/CMakeLists.txt new file mode 100644 index 000000000..410435912 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/CMakeLists.txt @@ -0,0 +1,383 @@ +# CMakeLists.txt + +# Copyright (C) 2007-2011 Glenn Randers-Pehrson + +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +cmake_minimum_required(VERSION 2.4.4) +set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS true) + +if(UNIX AND NOT DEFINED CMAKE_BUILD_TYPE) + if(CMAKE_MAJOR_VERSION EQUAL 2 AND CMAKE_MINOR_VERSION EQUAL 4) + # workaround CMake 2.4.x bug + set(CMAKE_BUILD_TYPE "RelWithDebInfo" CACHE STRING + "Choose the type of build, options are: + None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) + Debug + Release + RelWithDebInfo + MinSizeRel.") + else() + set(CMAKE_BUILD_TYPE "RelWithDebInfo" CACHE STRING + "Choose the type of build, options are: + None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) + Debug + Release + RelWithDebInfo + MinSizeRel.") + endif() +endif() + +project(libpng C) +enable_testing() + +set(PNGLIB_MAJOR 1) +set(PNGLIB_MINOR 6) +set(PNGLIB_RELEASE 2) +set(PNGLIB_NAME libpng${PNGLIB_MAJOR}${PNGLIB_MINOR}) +set(PNGLIB_VERSION ${PNGLIB_MAJOR}.${PNGLIB_MINOR}.${PNGLIB_RELEASE}) + +# needed packages +find_package(ZLIB REQUIRED) +include_directories(${ZLIB_INCLUDE_DIR}) + +if(NOT WIN32) + find_library(M_LIBRARY + NAMES m + PATHS /usr/lib /usr/local/lib + ) + if(NOT M_LIBRARY) + message(STATUS + "math library 'libm' not found - floating point support disabled") + endif() +else() + # not needed on windows + set(M_LIBRARY "") +endif() + +# COMMAND LINE OPTIONS +if(DEFINED PNG_SHARED) + option(PNG_SHARED "Build shared lib" ${PNG_SHARED}) +else() + option(PNG_SHARED "Build shared lib" ON) +endif() +if(DEFINED PNG_STATIC) + option(PNG_STATIC "Build static lib" ${PNG_STATIC}) +else() + option(PNG_STATIC "Build static lib" ON) +endif() + +option(PNG_TESTS "Build libpng tests" YES) + +# Many more configuration options could be added here +option(PNG_DEBUG "Build with debug output" NO) +option(PNGARG "Disable ANSI-C prototypes" NO) + +# SET LIBNAME +set(PNG_LIB_NAME png${PNGLIB_MAJOR}${PNGLIB_MINOR}) + +# to distinguish between debug and release lib +set(CMAKE_DEBUG_POSTFIX "d") + +# Use the prebuilt pnglibconf.h file from the scripts folder +# TODO: fix this by building with awk; without this no cmake build can be +# configured directly (to do so indirectly use your local awk to build a +# pnglibconf.h in the build directory.) +configure_file(${CMAKE_CURRENT_SOURCE_DIR}/scripts/pnglibconf.h.prebuilt + ${CMAKE_CURRENT_BINARY_DIR}/pnglibconf.h) +include_directories(${CMAKE_CURRENT_BINARY_DIR}) + +# OUR SOURCES +set(libpng_public_hdrs + png.h + pngconf.h + ${CMAKE_CURRENT_BINARY_DIR}/pnglibconf.h +) +set(libpng_sources + ${libpng_public_hdrs} + pngdebug.h + pnginfo.h + pngpriv.h + pngstruct.h + png.c + pngerror.c + pngget.c + pngmem.c + pngpread.c + pngread.c + pngrio.c + pngrtran.c + pngrutil.c + pngset.c + pngtrans.c + pngwio.c + pngwrite.c + pngwtran.c + pngwutil.c +) +set(pngtest_sources + pngtest.c +) +set(pngvalid_sources + contrib/libtests/pngvalid.c +) +set(pngstest_sources + contrib/libtests/pngstest.c +) +# SOME NEEDED DEFINITIONS + +if(MSVC) + add_definitions(-D_CRT_SECURE_NO_DEPRECATE) +endif(MSVC) + +if(PNG_DEBUG) + add_definitions(-DPNG_DEBUG) +endif() + +# NOW BUILD OUR TARGET +include_directories(${CMAKE_CURRENT_SOURCE_DIR} ${ZLIB_INCLUDE_DIR}) + +unset(PNG_LIB_TARGETS) + +if(PNG_SHARED) + add_library(${PNG_LIB_NAME} SHARED ${libpng_sources}) + set(PNG_LIB_TARGETS ${PNG_LIB_NAME}) + if(MSVC) + # msvc does not append 'lib' - do it here to have consistent name + set_target_properties(${PNG_LIB_NAME} PROPERTIES PREFIX "lib") + set_target_properties(${PNG_LIB_NAME} PROPERTIES IMPORT_PREFIX "lib") + endif() + target_link_libraries(${PNG_LIB_NAME} ${ZLIB_LIBRARY} ${M_LIBRARY}) +endif() + +if(PNG_STATIC) +# does not work without changing name + set(PNG_LIB_NAME_STATIC ${PNG_LIB_NAME}_static) + add_library(${PNG_LIB_NAME_STATIC} STATIC ${libpng_sources}) + list(APPEND PNG_LIB_TARGETS ${PNG_LIB_NAME_STATIC}) + if(MSVC) + # msvc does not append 'lib' - do it here to have consistent name + set_target_properties(${PNG_LIB_NAME_STATIC} PROPERTIES PREFIX "lib") + endif() + target_link_libraries(${PNG_LIB_NAME_STATIC} ${ZLIB_LIBRARY} ${M_LIBRARY}) +endif() + +if(NOT PNG_LIB_TARGETS) + message(SEND_ERROR + "No library variant selected to build. " + "Please enable at least one of the following options: PNG_STATIC, PNG_SHARED") +endif() + +if(PNG_SHARED AND WIN32) + set_target_properties(${PNG_LIB_NAME} PROPERTIES DEFINE_SYMBOL PNG_BUILD_DLL) +endif() + +if(PNG_TESTS AND PNG_SHARED) + # does not work with msvc due to png_lib_ver issue + add_executable(pngtest ${pngtest_sources}) + target_link_libraries(pngtest ${PNG_LIB_NAME}) + add_test(pngtest ./pngtest ${CMAKE_CURRENT_SOURCE_DIR}/pngtest.png) + # + add_executable(pngvalid ${pngvalid_sources}) + target_link_libraries(pngvalid ${PNG_LIB_NAME}) + add_test(pngvalid ./pngvalid) + add_executable(pngstest ${pngstest_sources}) + target_link_libraries(pngstest ${PNG_LIB_NAME}) + add_test(pngstest ./pngstest + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn0g01.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn0g02.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn0g04.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn0g08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn0g16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn2c08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn2c16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn3p01.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn3p02.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn3p04.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn4a08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn4a16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn6a08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn6a16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbbn0g01.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbbn0g02.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbbn0g04.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbbn2c16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbbn3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbgn2c16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbgn3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbrn2c08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbwn0g16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbwn3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbyn3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftp0n0g08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftp0n2c08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftp0n3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftp1n3p08.png + ) +endif() + +# Ensure the CMAKE_LIBRARY_OUTPUT_DIRECTORY is set +IF(NOT CMAKE_LIBRARY_OUTPUT_DIRECTORY) + SET(CMAKE_LIBRARY_OUTPUT_DIRECTORY "lib") +ENDIF(NOT CMAKE_LIBRARY_OUTPUT_DIRECTORY) + +# Set a variable with CMake code which: +# Creates a symlink from src to dest (if possible) or alternatively +# copies if different. +macro(CREATE_SYMLINK SRC_FILE DEST_FILE) + FILE(REMOVE ${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${DEST_FILE}) + if(WIN32 AND NOT CYGWIN AND NOT MSYS) + ADD_CUSTOM_COMMAND( + OUTPUT ${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${DEST_FILE} ${CMAKE_CURRENT_BINARY_DIR}/${DEST_FILE} + COMMAND ${CMAKE_COMMAND} -E copy_if_different "${SRC_FILE}" ${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${DEST_FILE} + COMMAND ${CMAKE_COMMAND} -E copy_if_different "${SRC_FILE}" ${CMAKE_CURRENT_BINARY_DIR}/${DEST_FILE} + DEPENDS ${PNG_LIB_TARGETS} + ) + ADD_CUSTOM_TARGET(${DEST_FILE}_COPY ALL DEPENDS ${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${DEST_FILE}) + else(WIN32 AND NOT CYGWIN AND NOT MSYS) + get_filename_component(LINK_TARGET "${SRC_FILE}" NAME) + execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink "${LINK_TARGET}" ${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${DEST_FILE} WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}) + execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink "${LINK_TARGET}" ${DEST_FILE} WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}) + endif(WIN32 AND NOT CYGWIN AND NOT MSYS) +endmacro() + +# libpng is a library so default to 'lib' +if(NOT DEFINED CMAKE_INSTALL_LIBDIR) + set(CMAKE_INSTALL_LIBDIR lib) +endif(NOT DEFINED CMAKE_INSTALL_LIBDIR) + +# CREATE PKGCONFIG FILES +# we use the same files like ./configure, so we have to set its vars +# Only do this on Windows for Cygwin - the files don't make much sense outside +# a UNIX look alike +if(NOT WIN32 OR CYGWIN OR MINGW) + set(prefix ${CMAKE_INSTALL_PREFIX}) + set(exec_prefix ${CMAKE_INSTALL_PREFIX}) + set(libdir ${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}) + set(includedir ${CMAKE_INSTALL_PREFIX}/include) + set(LIBS "-lz -lm") + configure_file(${CMAKE_CURRENT_SOURCE_DIR}/libpng.pc.in + ${CMAKE_CURRENT_BINARY_DIR}/${PNGLIB_NAME}.pc @ONLY) + CREATE_SYMLINK(${PNGLIB_NAME}.pc libpng.pc) + + configure_file(${CMAKE_CURRENT_SOURCE_DIR}/libpng-config.in + ${CMAKE_CURRENT_BINARY_DIR}/${PNGLIB_NAME}-config @ONLY) + CREATE_SYMLINK(${PNGLIB_NAME}-config libpng-config) +endif(NOT WIN32 OR CYGWIN OR MINGW) + +# SET UP LINKS +if(PNG_SHARED) + set_target_properties(${PNG_LIB_NAME} PROPERTIES +# VERSION 16.${PNGLIB_RELEASE}.1.6.2 + VERSION 16.${PNGLIB_RELEASE}.0 + SOVERSION 16 + CLEAN_DIRECT_OUTPUT 1) +endif() +if(PNG_STATIC) + # MSVC doesn't use a different file extension for shared vs. static + # libs. We are able to change OUTPUT_NAME to remove the _static + # for all other platforms. + if(NOT MSVC) + set_target_properties(${PNG_LIB_NAME_STATIC} PROPERTIES + OUTPUT_NAME ${PNG_LIB_NAME} + CLEAN_DIRECT_OUTPUT 1) + endif() +endif() + +# If CMake > 2.4.x, we set a variable used below to export +# targets to an export file. +# TODO: Use VERSION_GREATER after our cmake_minimum_required >= 2.6.2 +if(CMAKE_MAJOR_VERSION GREATER 1 AND CMAKE_MINOR_VERSION GREATER 4) + set(PNG_EXPORT_RULE EXPORT libpng) +elseif(CMAKE_MAJOR_VERSION GREATER 2) # future proof + set(PNG_EXPORT_RULE EXPORT libpng) +endif() + +# INSTALL +if(NOT SKIP_INSTALL_LIBRARIES AND NOT SKIP_INSTALL_ALL ) + install(TARGETS ${PNG_LIB_TARGETS} + ${PNG_EXPORT_RULE} + RUNTIME DESTINATION bin + LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} + ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}) + + if(PNG_SHARED) + # Create a symlink for libpng.dll.a => libpng16.dll.a on Cygwin + if(CYGWIN OR MINGW) + get_target_property(BUILD_TARGET_LOCATION ${PNG_LIB_NAME} LOCATION_${CMAKE_BUILD_TYPE}) + CREATE_SYMLINK(${BUILD_TARGET_LOCATION} libpng${CMAKE_IMPORT_LIBRARY_SUFFIX}) + install(FILES ${CMAKE_CURRENT_BINARY_DIR}/libpng${CMAKE_IMPORT_LIBRARY_SUFFIX} + DESTINATION ${CMAKE_INSTALL_LIBDIR}) + endif(CYGWIN OR MINGW) + + if(NOT WIN32) + get_target_property(BUILD_TARGET_LOCATION ${PNG_LIB_NAME} LOCATION_${CMAKE_BUILD_TYPE}) + CREATE_SYMLINK(${BUILD_TARGET_LOCATION} libpng${CMAKE_SHARED_LIBRARY_SUFFIX}) + install(FILES ${CMAKE_CURRENT_BINARY_DIR}/libpng${CMAKE_SHARED_LIBRARY_SUFFIX} + DESTINATION ${CMAKE_INSTALL_LIBDIR}) + endif(NOT WIN32) + endif(PNG_SHARED) + + if(PNG_STATIC) + if(NOT WIN32 OR CYGWIN OR MINGW) + get_target_property(BUILD_TARGET_LOCATION ${PNG_LIB_NAME_STATIC} LOCATION_${CMAKE_BUILD_TYPE}) + CREATE_SYMLINK(${BUILD_TARGET_LOCATION} libpng${CMAKE_STATIC_LIBRARY_SUFFIX}) + install(FILES ${CMAKE_CURRENT_BINARY_DIR}/libpng${CMAKE_STATIC_LIBRARY_SUFFIX} + DESTINATION ${CMAKE_INSTALL_LIBDIR}) + endif(NOT WIN32 OR CYGWIN OR MINGW) + endif() +endif() + +if(NOT SKIP_INSTALL_HEADERS AND NOT SKIP_INSTALL_ALL ) + install(FILES ${libpng_public_hdrs} DESTINATION include) + install(FILES ${libpng_public_hdrs} DESTINATION include/${PNGLIB_NAME}) +endif() +if(NOT SKIP_INSTALL_EXECUTABLES AND NOT SKIP_INSTALL_ALL ) + if(NOT WIN32 OR CYGWIN OR MINGW) + install(PROGRAMS ${CMAKE_CURRENT_BINARY_DIR}/libpng-config DESTINATION bin) + install(PROGRAMS ${CMAKE_CURRENT_BINARY_DIR}/${PNGLIB_NAME}-config + DESTINATION bin) + endif(NOT WIN32 OR CYGWIN OR MINGW) +endif() + +if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL ) + # Install man pages + if(NOT PNG_MAN_DIR) + set(PNG_MAN_DIR "share/man") + endif() + install(FILES libpng.3 libpngpf.3 DESTINATION ${PNG_MAN_DIR}/man3) + install(FILES png.5 DESTINATION ${PNG_MAN_DIR}/man5) + # Install pkg-config files + if(NOT WIN32 OR CYGWIN OR MINGW) + install(FILES ${CMAKE_CURRENT_BINARY_DIR}/libpng.pc + DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig) + install(PROGRAMS ${CMAKE_CURRENT_BINARY_DIR}/libpng-config + DESTINATION bin) + install(FILES ${CMAKE_CURRENT_BINARY_DIR}/${PNGLIB_NAME}.pc + DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig) + install(PROGRAMS ${CMAKE_CURRENT_BINARY_DIR}/${PNGLIB_NAME}-config + DESTINATION bin) + endif(NOT WIN32 OR CYGWIN OR MINGW) +endif() + +# On versions of CMake that support it, create an export file CMake +# users can include() to import our targets +if(PNG_EXPORT_RULE AND NOT SKIP_INSTALL_EXPORT AND NOT SKIP_INSTALL_ALL ) + install(EXPORT libpng DESTINATION lib/libpng FILE lib${PNG_LIB_NAME}.cmake) +endif() + +# what's with libpng-$VER%.txt and all the extra files? + +# UNINSTALL +# do we need this? + +# DIST +# do we need this? + +# to create msvc import lib for mingw compiled shared lib +# pexports libpng.dll > libpng.def +# lib /def:libpng.def /machine:x86 + diff --git a/src/SDL2/external/libpng-1.6.2/INSTALL b/src/SDL2/external/libpng-1.6.2/INSTALL new file mode 100644 index 000000000..f98737800 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/INSTALL @@ -0,0 +1,170 @@ + +Installing libpng + +On Unix/Linux and similar systems, you can simply type + + ./configure [--prefix=/path] + make check + make install + +and ignore the rest of this document. + +If configure does not work on your system, or if you have a need to +change configure.ac or Makefile.am, and you have a reasonably +up-to-date set of tools, running ./autogen.sh in a git clone before +running ./configure may fix the problem. To be really sure that you +aren't using any of the included pre-built scripts, you can do this: + + ./configure --enable-maintainer-mode + make maintainer-clean + ./autogen.sh --maintainer --clean + ./autogen.sh --maintainer + ./configure [--prefix=/path] [other options] + make + make install + make check + +Instead, you can use one of the custom-built makefiles in the +"scripts" directory + + cp scripts/makefile.system makefile + make test + make install + +The files that are presently available in the scripts directory +are listed and described in scripts/README.txt. + +Or you can use one of the "projects" in the "projects" directory. + +Before installing libpng, you must first install zlib, if it +is not already on your system. zlib can usually be found +wherever you got libpng. zlib can be placed in another directory, +at the same level as libpng. + +If your system already has a preinstalled zlib you will still need +to have access to the zlib.h and zconf.h include files that +correspond to the version of zlib that's installed. + +If you wish to test with a particular zlib that is not first in the +standard library search path, put ZLIBLIB, ZLIBINC, CPPFLAGS, LDFLAGS, +and LD_LIBRARY_PATH in your environment before running "make test" +or "make distcheck": + +ZLIBLIB=/path/to/lib export ZLIBLIB +ZLIBINC=/path/to/include export ZLIBINC +CPPFLAGS="-I$ZLIBINC" export CPPFLAGS +LDFLAGS="-L$ZLIBLIB" export LDFLAGS +LD_LIBRARY_PATH="$ZLIBLIB:$LD_LIBRARY_PATH" export LD_LIBRARY_PATH + +If you are using one of the makefile scripts, put ZLIBLIB and ZLIBINC +in your environment and type "make ZLIBLIB=$ZLIBLIB ZLIBINC=$ZLIBINC test". + +If you want to use "cmake" (see www.cmake.org), type + + cmake . -DCMAKE_INSTALL_PREFIX=/path + make + make install + +You can rename the directories that you downloaded (they +might be called "libpng-x.y.z" or "libpngNN" and "zlib-1.2.7" +or "zlib127") so that you have directories called "zlib" and "libpng". + +Your directory structure should look like this: + + .. (the parent directory) + libpng (this directory) + INSTALL (this file) + README + *.h + *.c + CMakeLists.txt => "cmake" script + configuration files: + configure.ac, configure, Makefile.am, Makefile.in, + autogen.sh, config.guess, ltmain.sh, missing, libpng.pc.in, + libpng-config.in, aclocal.m4, config.h.in, config.sub, + depcomp, install-sh, mkinstalldirs, test-pngtest.sh + contrib + gregbook + libtests + pngminim + pngminus + pngsuite + visupng + projects + visualc71 + vstudio + scripts + makefile.* + *.def (module definition files) + etc. + pngtest.png + etc. + zlib + README + *.h + *.c + contrib + etc. + +If the line endings in the files look funny, you may wish to get the other +distribution of libpng. It is available in both tar.gz (UNIX style line +endings) and zip (DOS style line endings) formats. + +If you are building libpng with MSVC, you can enter the +libpng projects\visualc6 or visualc71 directory and follow the instructions +in README.txt. + +Otherwise enter the zlib directory and follow the instructions in zlib/README, +then come back here and run "configure" or choose the appropriate +makefile.sys in the scripts directory. + +Copy the file (or files) that you need from the +scripts directory into this directory, for example + + MSDOS example: copy scripts\makefile.msc makefile + UNIX example: cp scripts/makefile.std makefile + +Read the makefile to see if you need to change any source or +target directories to match your preferences. + +Then read pnglibconf.dfa to see if you want to make any configuration +changes. + +Then just run "make" which will create the libpng library in +this directory and "make test" which will run a quick test that reads +the "pngtest.png" file and writes a "pngout.png" file that should be +identical to it. Look for "9782 zero samples" in the output of the +test. For more confidence, you can run another test by typing +"pngtest pngnow.png" and looking for "289 zero samples" in the output. +Also, you can run "pngtest -m contrib/pngsuite/*.png" and compare +your output with the result shown in contrib/pngsuite/README. + +Most of the makefiles will allow you to run "make install" to +put the library in its final resting place (if you want to +do that, run "make install" in the zlib directory first if necessary). +Some also allow you to run "make test-installed" after you have +run "make install". + +Further information can be found in the README and libpng-manual.txt +files, in the individual makefiles, in png.h, and the manual pages +libpng.3 and png.5. + +Using the ./configure script -- 16 December 2002. +================================================= + +The ./configure script should work compatibly with what scripts/makefile.* +did, however there are some options you might need to add to configure +explicitly, which previously was done semi-automatically (if you didn't edit +scripts/makefile.* yourself, that is) + +CFLAGS="-Wall -O -funroll-loops \ +-malign-loops=2 -malign-functions=2" ./configure --prefix=/usr/include \ +--with-pkgconfigdir=/usr/lib/pkgconfig --includedir=/usr/include + +You can alternatively specify --includedir=/usr/include, /usr/local/include, +/usr/include/libpng%NN%, or whatever. + +If you find that the configure script is out-of-date or is not supporting +your platform properly, try running autogen.sh to regenerate "configure", +"Makefile.in", and the other configuration files. Then try configure again. + diff --git a/src/SDL2/external/libpng-1.6.2/LICENSE b/src/SDL2/external/libpng-1.6.2/LICENSE new file mode 100644 index 000000000..acb4e1781 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/LICENSE @@ -0,0 +1,111 @@ + +This copy of the libpng notices is provided for your convenience. In case of +any discrepancy between this copy and the notices in the file png.h that is +included in the libpng distribution, the latter shall prevail. + +COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: + +If you modify libpng you may insert additional notices immediately following +this sentence. + +This code is released under the libpng license. + +libpng versions 1.2.6, August 15, 2004, through 1.6.2, April 25, 2013, are +Copyright (c) 2004, 2006-2012 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-1.2.5 +with the following individual added to the list of Contributing Authors + + Cosmin Truta + +libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are +Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-1.0.6 +with the following individuals added to the list of Contributing Authors + + Simon-Pierre Cadieux + Eric S. Raymond + Gilles Vollant + +and with the following additions to the disclaimer: + + There is no warranty against interference with your enjoyment of the + library or against infringement. There is no warranty that our + efforts or the library will fulfill any of your particular purposes + or needs. This library is provided with all faults, and the entire + risk of satisfactory quality, performance, accuracy, and effort is with + the user. + +libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are +Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-0.96, +with the following individuals added to the list of Contributing Authors: + + Tom Lane + Glenn Randers-Pehrson + Willem van Schaik + +libpng versions 0.89, June 1996, through 0.96, May 1997, are +Copyright (c) 1996, 1997 Andreas Dilger +Distributed according to the same disclaimer and license as libpng-0.88, +with the following individuals added to the list of Contributing Authors: + + John Bowler + Kevin Bracey + Sam Bushell + Magnus Holmgren + Greg Roelofs + Tom Tanner + +libpng versions 0.5, May 1995, through 0.88, January 1996, are +Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. + +For the purposes of this copyright and license, "Contributing Authors" +is defined as the following set of individuals: + + Andreas Dilger + Dave Martindale + Guy Eric Schalnat + Paul Schmidt + Tim Wegner + +The PNG Reference Library is supplied "AS IS". The Contributing Authors +and Group 42, Inc. disclaim all warranties, expressed or implied, +including, without limitation, the warranties of merchantability and of +fitness for any purpose. The Contributing Authors and Group 42, Inc. +assume no liability for direct, indirect, incidental, special, exemplary, +or consequential damages, which may result from the use of the PNG +Reference Library, even if advised of the possibility of such damage. + +Permission is hereby granted to use, copy, modify, and distribute this +source code, or portions hereof, for any purpose, without fee, subject +to the following restrictions: + +1. The origin of this source code must not be misrepresented. + +2. Altered versions must be plainly marked as such and must not + be misrepresented as being the original source. + +3. This Copyright notice may not be removed or altered from any + source or altered source distribution. + +The Contributing Authors and Group 42, Inc. specifically permit, without +fee, and encourage the use of this source code as a component to +supporting the PNG file format in commercial products. If you use this +source code in a product, acknowledgment is not required but would be +appreciated. + + +A "png_get_copyright" function is available, for convenient use in "about" +boxes and the like: + + printf("%s",png_get_copyright(NULL)); + +Also, the PNG logo (in PNG format, of course) is supplied in the +files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). + +Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a +certification mark of the Open Source Initiative. + +Glenn Randers-Pehrson +glennrp at users.sourceforge.net +April 25, 2013 diff --git a/src/SDL2/external/libpng-1.6.2/Makefile.am b/src/SDL2/external/libpng-1.6.2/Makefile.am new file mode 100644 index 000000000..a2cd2c10b --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/Makefile.am @@ -0,0 +1,295 @@ +# Makefile.am: +# Source file for Makefile.in (and hence Makefile) +# + +PNGLIB_BASENAME= libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@ + +ACLOCAL_AMFLAGS = -I scripts + +# test programs - run on make check, make distcheck +check_PROGRAMS= pngtest pngunknown pngstest pngvalid + +pngtest_SOURCES = pngtest.c +pngtest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la + +pngvalid_SOURCES = contrib/libtests/pngvalid.c +pngvalid_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la + +pngstest_SOURCES = contrib/libtests/pngstest.c +pngstest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la + +pngunknown_SOURCES = contrib/libtests/pngunknown.c +pngunknown_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la + +# Generally these are single line shell scripts to run a test with a particular +# set of parameters: +TESTS =\ + tests/pngtest\ + tests/pngvalid-gamma-16-to-8 tests/pngvalid-gamma-alpha-mode\ + tests/pngvalid-gamma-background tests/pngvalid-gamma-expand16-alpha-mode\ + tests/pngvalid-gamma-expand16-background\ + tests/pngvalid-gamma-expand16-transform tests/pngvalid-gamma-sbit\ + tests/pngvalid-gamma-threshold tests/pngvalid-gamma-transform\ + tests/pngvalid-progressive-interlace-size\ + tests/pngvalid-progressive-interlace-standard\ + tests/pngvalid-progressive-interlace-transform\ + tests/pngvalid-progressive-standard tests/pngvalid-standard\ + tests/pngstest-0g01 tests/pngstest-0g02 tests/pngstest-0g04\ + tests/pngstest-0g08 tests/pngstest-0g16 tests/pngstest-2c08\ + tests/pngstest-2c16 tests/pngstest-3p01 tests/pngstest-3p02\ + tests/pngstest-3p04 tests/pngstest-3p08 tests/pngstest-4a08\ + tests/pngstest-4a16 tests/pngstest-6a08 tests/pngstest-6a16\ + tests/pngstest-error tests/pngunknown-IDAT\ + tests/pngunknown-discard tests/pngunknown-if-safe tests/pngunknown-sAPI\ + tests/pngunknown-sTER tests/pngunknown-save tests/pngunknown-vpAg + +# These tests are expected, and required, to fail: +XFAIL_TESTS = tests/pngstest-error + +# man pages +dist_man_MANS= libpng.3 libpngpf.3 png.5 + +# generate the -config scripts if required +binconfigs= libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config +EXTRA_SCRIPTS= libpng-config libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config +bin_SCRIPTS= @binconfigs@ + +# rules to build libpng, only build the old library on request +lib_LTLIBRARIES=libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +# EXTRA_LTLIBRARIES= libpng.la +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = png.c pngerror.c\ + pngget.c pngmem.c pngpread.c pngread.c pngrio.c pngrtran.c pngrutil.c\ + pngset.c pngtrans.c pngwio.c pngwrite.c pngwtran.c pngwutil.c\ + png.h pngconf.h pngdebug.h pnginfo.h pngpriv.h pngstruct.h pngusr.dfa + +if PNG_ARM_NEON +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES += arm/arm_init.c\ + arm/filter_neon.S +endif + +nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = pnglibconf.h + +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS = -no-undefined -export-dynamic \ + -version-number @PNGLIB_MAJOR@@PNGLIB_MINOR@:@PNGLIB_RELEASE@:0 + +if HAVE_LD_VERSION_SCRIPT +# Versioned symbols and restricted exports +if HAVE_SOLARIS_LD + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS += -Wl,-M -Wl,libpng.vers +else + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS += -Wl,--version-script=libpng.vers +endif + + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.vers +else +# Only restricted exports when possible + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS += -export-symbols libpng.sym + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.sym +endif + +#distribute headers in /usr/include/libpng/* +pkgincludedir= $(includedir)/$(PNGLIB_BASENAME) +pkginclude_HEADERS= png.h pngconf.h +nodist_pkginclude_HEADERS= pnglibconf.h + +# pkg-config stuff, note that libpng.pc is always required in order +# to get the correct library +pkgconfigdir = @pkgconfigdir@ +pkgconfig_DATA = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc + +# Extra source distribution files, '${srcdir}' is used below to stop build files +# from those directories being included. This only works if the configure is +# not done in the source directory! +EXTRA_DIST= \ + ANNOUNCE CHANGES INSTALL LICENSE README TODO \ + pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \ + ${srcdir}/contrib ${srcdir}/projects ${srcdir}/scripts \ + $(TESTS) $(XFAIL_TESTS) tests/pngstest \ + CMakeLists.txt example.c libpng-manual.txt + +SCRIPT_CLEANFILES=scripts/*.out scripts/*.chk scripts/pnglibconf.dfn + +CLEANFILES= *.tf? pngout.png libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc \ + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config libpng.vers libpng.sym \ + check.new pnglibconf.* pngprefix.h symbols.new pngtest-log.txt \ + $(SCRIPT_CLEANFILES) + +MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.guess config.h.in \ +config.sub configure depcomp install-sh ltmain.sh missing + +# PNG_COPTS give extra options for the C compiler to be used on all compilation +# steps (unless targe_CFLAGS is specified; that will take precedence over +# AM_CFLAGS) +PNG_COPTS = @PNG_COPTS@ +AM_CFLAGS = ${PNG_COPTS} + +# DFNCPP is normally just CPP - the C preprocessor - but on Solaris and maybe +# other operating systems (NeXT?) the C preprocessor selected by configure +# checks input tokens for validity - effectively it performs part of the ANSI-C +# parsing - and therefore fails with the .df files. configure.ac has special +# checks for this and sets DFNCPP appropriately. +DFNCPP = @DFNCPP@ + +SUFFIXES = .chk .dfn .out + +$(PNGLIB_BASENAME).pc: libpng.pc + cp libpng.pc $@ + +$(PNGLIB_BASENAME)-config: libpng-config + cp libpng-config $@ + +scripts/sym.out scripts/vers.out: png.h pngconf.h pnglibconf.h +scripts/prefix.out: png.h pngconf.h pnglibconf.out +scripts/symbols.out: png.h pngconf.h $(srcdir)/scripts/pnglibconf.h.prebuilt +scripts/intprefix.out: pnglibconf.h + +libpng.sym: scripts/sym.out + rm -f $@ + cp $? $@ +libpng.vers: scripts/vers.out + rm -f $@ + cp $? $@ + +if DO_PNG_PREFIX +# Rename functions in scripts/prefix.out with a PNG_PREFIX prefix. +# Rename macros in scripts/macro.lst from PNG_PREFIXpng_ to PNG_ (the actual +# implementation of the macro). +pnglibconf.h: pnglibconf.out scripts/prefix.out scripts/macro.lst + rm -f $@ + $(AWK) 's==0 && NR>1{print prev}\ + s==0{prev=$$0}\ + s==1{print "#define", $$1, "@PNG_PREFIX@" $$1}\ + s==2{print "#define @PNG_PREFIX@png_" $$1, "PNG_" $$1}\ + END{print prev}' s=0 pnglibconf.out s=1 scripts/prefix.out\ + s=2 ${srcdir}/scripts/macro.lst >pnglibconf.tf8 + mv pnglibconf.tf8 $@ + +pngprefix.h: scripts/intprefix.out + rm -f pngprefix.tf1 + $(AWK) '{print "#define", $$1, "@PNG_PREFIX@" $$1}' $? >pngprefix.tf1 + mv pngprefix.tf1 $@ +else +pnglibconf.h: pnglibconf.out + rm -f $@ + cp $? $@ + +pngprefix.h: # is empty + :>$@ +endif + +$(srcdir)/scripts/pnglibconf.h.prebuilt: + @echo "Attempting to build $@" >&2 + @echo "This is a machine generated file, but if you want to make" >&2 + @echo "a new one simply make 'scripts/pnglibconf.out' and copy that" >&2 + @exit 1 + +# The following is necessary to ensure that the local pnglibconf.h is used, not +# an installed one (this can happen immediately after on a clean system if +# 'make test' is the first thing the user does.) +contrib/libtests/pngstest.o contrib/libtests/pngvalid.o pngtest.o: pnglibconf.h +contrib/libtests/pngunknown.o: pnglibconf.h + +# We must use -DPNG_NO_USE_READ_MACROS here even when the library may actually +# be built with PNG_USE_READ_MACROS; this prevents the read macros from +# interfering with the symbol file format. +SYMBOL_CFLAGS = -DPNGLIB_LIBNAME='PNG@PNGLIB_MAJOR@@PNGLIB_MINOR@_0'\ + -DPNGLIB_VERSION='@PNGLIB_VERSION@'\ + -DSYMBOL_PREFIX='$(SYMBOL_PREFIX)'\ + -DPNG_NO_USE_READ_MACROS -DPNG_BUILDING_SYMBOL_TABLE + +if DO_PNG_PREFIX +SYMBOL_CFLAGS += -DPNG_PREFIX='@PNG_PREFIX@' +endif + +.dfn.out: + rm -f $@ $*.c $*.tf[12] + test -d scripts || mkdir scripts || test -d scripts + echo '#include "$<"' >$*.c + $(DFNCPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)\ + $(CPPFLAGS) $(SYMBOL_CFLAGS) $*.c > $*.tf1 + $(AWK) -f "${srcdir}/scripts/dfn.awk" out="$*.tf2" $*.tf1 1>&2 + rm -f $*.c $*.tf1 + mv $*.tf2 $@ + +# The .dfn file for pnglibconf.h is machine generated +pnglibconf.dfn: scripts/pnglibconf.dfa scripts/options.awk pngconf.h pngusr.dfa $(DFA_XTRA) + rm -f $@ $*.tf[45] + $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf4 version=search\ + ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\ + ${srcdir}/pngusr.dfa $(DFA_XTRA) 1>&2 + $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf5 $*.tf4 1>&2 + rm $*.tf4 + mv $*.tf5 $@ + +# Symbol checks (.def and .out files should match) +scripts/symbols.chk: scripts/checksym.awk scripts/symbols.def scripts/symbols.out + +.out.chk: + rm -f $@ $*.new + $(AWK) -f ${srcdir}/scripts/checksym.awk ${srcdir}/scripts/${*F}.def\ + of="$*.new" $< >&2 + mv $*.new $@ + +# used on demand to regenerate the standard header, CPPFLAGS should +# be empty - no non-standard defines +scripts/pnglibconf.dfn: scripts/pnglibconf.dfa scripts/options.awk pngconf.h + rm -f $@ pnglibconf.tf[67] + test -z "$(CPPFLAGS)" + echo "com @PNGLIB_VERSION@ STANDARD API DEFINITION" |\ + $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf6\ + logunsupported=1 version=search ${srcdir}/pngconf.h -\ + ${srcdir}/scripts/pnglibconf.dfa 1>&2 + $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf7\ + pnglibconf.tf6 1>&2 + rm pnglibconf.tf6 + mv pnglibconf.tf7 $@ + +$(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS): png.h pngconf.h \ + pnglibconf.h pngpriv.h pngdebug.h pnginfo.h pngstruct.h pngprefix.h + +test: check-am + +# Extra checks +check: scripts/symbols.chk + +# Don't distribute the generated script files +dist-hook: + cd '$(top_distdir)'; rm -f $(SCRIPT_CLEANFILES) + +# install the .../include headers as links to the new ones +install-data-hook: + cd '$(DESTDIR)$(includedir)'; rm -f png.h pngconf.h pnglibconf.h + cd '$(DESTDIR)$(includedir)'; $(LN_S) $(PNGLIB_BASENAME)/png.h png.h + cd '$(DESTDIR)$(includedir)'; $(LN_S) $(PNGLIB_BASENAME)/pngconf.h \ + pngconf.h + cd '$(DESTDIR)$(includedir)'; $(LN_S) $(PNGLIB_BASENAME)/pnglibconf.h \ + pnglibconf.h + cd '$(DESTDIR)$(pkgconfigdir)'; rm -f libpng.pc + cd '$(DESTDIR)$(pkgconfigdir)'; $(LN_S) $(PNGLIB_BASENAME).pc libpng.pc + +# do evil things to libpng to cause libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@ to be used +install-exec-hook: + cd '$(DESTDIR)$(bindir)'; rm -f libpng-config + cd '$(DESTDIR)$(bindir)';\ + $(LN_S) $(PNGLIB_BASENAME)-config libpng-config + @set -x;\ + cd '$(DESTDIR)$(libdir)';\ + for ext in a la so so.@PNGLIB_MAJOR@@PNGLIB_MINOR@.@PNGLIB_RELEASE@\ + sl dylib dll.a; do\ + rm -f libpng.$$ext;\ + if test -f $(PNGLIB_BASENAME).$$ext; then\ + $(LN_S) $(PNGLIB_BASENAME).$$ext libpng.$$ext;\ + fi;\ + done + +uninstall-hook: + cd '$(DESTDIR)$(includedir)'; rm -f png.h pngconf.h pnglibconf.h + rm -f '$(DESTDIR)$(pkgconfigdir)/libpng.pc' + rm -f '$(DESTDIR)$(bindir)/libpng-config' + rm -f '$(DESTDIR)$(libdir)/libpng.a' + rm -f '$(DESTDIR)$(libdir)/libpng.la' + rm -f '$(DESTDIR)$(libdir)/libpng.so' + rm -f '$(DESTDIR)$(libdir)/libpng.so.@PNGLIB_MAJOR@@PNGLIB_MINOR@.@PNGLIB_RELEASE@' + rm -f '$(DESTDIR)$(libdir)/libpng.sl' + rm -f '$(DESTDIR)$(libdir)/libpng.dylib' + rm -f '$(DESTDIR)$(libdir)/libpng.dll.a' diff --git a/src/SDL2/external/libpng-1.6.2/Makefile.in b/src/SDL2/external/libpng-1.6.2/Makefile.in new file mode 100644 index 000000000..5cd574713 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/Makefile.in @@ -0,0 +1,2059 @@ +# Makefile.in generated by automake 1.13 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Makefile.am: +# Source file for Makefile.in (and hence Makefile) +# + + + + +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +check_PROGRAMS = pngtest$(EXEEXT) pngunknown$(EXEEXT) \ + pngstest$(EXEEXT) pngvalid$(EXEEXT) +@PNG_ARM_NEON_TRUE@am__append_1 = arm/arm_init.c\ +@PNG_ARM_NEON_TRUE@ arm/filter_neon.S + + +# Versioned symbols and restricted exports +@HAVE_LD_VERSION_SCRIPT_TRUE@@HAVE_SOLARIS_LD_TRUE@am__append_2 = -Wl,-M -Wl,libpng.vers +@HAVE_LD_VERSION_SCRIPT_TRUE@@HAVE_SOLARIS_LD_FALSE@am__append_3 = -Wl,--version-script=libpng.vers +# Only restricted exports when possible +@HAVE_LD_VERSION_SCRIPT_FALSE@am__append_4 = -export-symbols libpng.sym +@DO_PNG_PREFIX_TRUE@am__append_5 = -DPNG_PREFIX='@PNG_PREFIX@' +subdir = . +DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(top_srcdir)/configure $(am__configure_deps) \ + $(srcdir)/config.h.in $(srcdir)/libpng.pc.in \ + $(srcdir)/libpng-config.in depcomp $(dist_man_MANS) \ + $(pkginclude_HEADERS) test-driver INSTALL README TODO \ + config.guess config.sub install-sh missing ltmain.sh +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/scripts/libtool.m4 \ + $(top_srcdir)/scripts/ltoptions.m4 \ + $(top_srcdir)/scripts/ltsugar.m4 \ + $(top_srcdir)/scripts/ltversion.m4 \ + $(top_srcdir)/scripts/lt~obsolete.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = libpng.pc libpng-config +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ + "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)" \ + "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgincludedir)" \ + "$(DESTDIR)$(pkgincludedir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LIBADD = +am__libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES_DIST = png.c \ + pngerror.c pngget.c pngmem.c pngpread.c pngread.c pngrio.c \ + pngrtran.c pngrutil.c pngset.c pngtrans.c pngwio.c pngwrite.c \ + pngwtran.c pngwutil.c png.h pngconf.h pngdebug.h pnginfo.h \ + pngpriv.h pngstruct.h pngusr.dfa arm/arm_init.c \ + arm/filter_neon.S +@PNG_ARM_NEON_TRUE@am__objects_1 = arm_init.lo filter_neon.lo +am_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS = png.lo pngerror.lo \ + pngget.lo pngmem.lo pngpread.lo pngread.lo pngrio.lo \ + pngrtran.lo pngrutil.lo pngset.lo pngtrans.lo pngwio.lo \ + pngwrite.lo pngwtran.lo pngwutil.lo $(am__objects_1) +nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS = +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS = \ + $(am_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) \ + $(nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LINK = $(LIBTOOL) $(AM_V_lt) \ + --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link \ + $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS) $(LDFLAGS) -o \ + $@ +am_pngstest_OBJECTS = pngstest.$(OBJEXT) +pngstest_OBJECTS = $(am_pngstest_OBJECTS) +pngstest_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +am_pngtest_OBJECTS = pngtest.$(OBJEXT) +pngtest_OBJECTS = $(am_pngtest_OBJECTS) +pngtest_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +am_pngunknown_OBJECTS = pngunknown.$(OBJEXT) +pngunknown_OBJECTS = $(am_pngunknown_OBJECTS) +pngunknown_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +am_pngvalid_OBJECTS = pngvalid.$(OBJEXT) +pngvalid_OBJECTS = $(am_pngvalid_OBJECTS) +pngvalid_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +SCRIPTS = $(bin_SCRIPTS) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) +LTCPPASCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CCASFLAGS) $(CCASFLAGS) +AM_V_CPPAS = $(am__v_CPPAS_@AM_V@) +am__v_CPPAS_ = $(am__v_CPPAS_@AM_DEFAULT_V@) +am__v_CPPAS_0 = @echo " CPPAS " $@; +am__v_CPPAS_1 = +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES) \ + $(nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES) \ + $(pngstest_SOURCES) $(pngtest_SOURCES) $(pngunknown_SOURCES) \ + $(pngvalid_SOURCES) +DIST_SOURCES = \ + $(am__libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES_DIST) \ + $(pngstest_SOURCES) $(pngtest_SOURCES) $(pngunknown_SOURCES) \ + $(pngvalid_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +man3dir = $(mandir)/man3 +man5dir = $(mandir)/man5 +NROFF = nroff +MANS = $(dist_man_MANS) +DATA = $(pkgconfig_DATA) +HEADERS = $(nodist_pkginclude_HEADERS) $(pkginclude_HEADERS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)config.h.in +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +AM_RECURSIVE_TARGETS = cscope check recheck +am__tty_colors_dummy = \ + mgn= red= grn= lgn= blu= brg= std=; \ + am__color_tests=no +am__tty_colors = { \ + $(am__tty_colors_dummy); \ + if test "X$(AM_COLOR_TESTS)" = Xno; then \ + am__color_tests=no; \ + elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ + am__color_tests=yes; \ + elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ + am__color_tests=yes; \ + fi; \ + if test $$am__color_tests = yes; then \ + red=''; \ + grn=''; \ + lgn=''; \ + blu=''; \ + mgn=''; \ + brg=''; \ + std=''; \ + fi; \ +} +am__recheck_rx = ^[ ]*:recheck:[ ]* +am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* +am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* +# A command that, given a newline-separated list of test names on the +# standard input, print the name of the tests that are to be re-run +# upon "make recheck". +am__list_recheck_tests = $(AWK) '{ \ + recheck = 1; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + { \ + if ((getline line2 < ($$0 ".log")) < 0) \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ + { \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ + { \ + break; \ + } \ + }; \ + if (recheck) \ + print $$0; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# A command that, given a newline-separated list of test names on the +# standard input, create the global log from their .trs and .log files. +am__create_global_log = $(AWK) ' \ +function fatal(msg) \ +{ \ + print "fatal: making $@: " msg | "cat >&2"; \ + exit 1; \ +} \ +function rst_section(header) \ +{ \ + print header; \ + len = length(header); \ + for (i = 1; i <= len; i = i + 1) \ + printf "="; \ + printf "\n\n"; \ +} \ +{ \ + copy_in_global_log = 1; \ + global_test_result = "RUN"; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".trs"); \ + if (line ~ /$(am__global_test_result_rx)/) \ + { \ + sub("$(am__global_test_result_rx)", "", line); \ + sub("[ ]*$$", "", line); \ + global_test_result = line; \ + } \ + else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ + copy_in_global_log = 0; \ + }; \ + if (copy_in_global_log) \ + { \ + rst_section(global_test_result ": " $$0); \ + while ((rc = (getline line < ($$0 ".log"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".log"); \ + print line; \ + }; \ + printf "\n"; \ + }; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# Restructured Text title. +am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } +# Solaris 10 'make', and several other traditional 'make' implementations, +# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it +# by disabling -e (using the XSI extension "set +e") if it's set. +am__sh_e_setup = case $$- in *e*) set +e;; esac +# Default flags passed to test drivers. +am__common_driver_flags = \ + --color-tests "$$am__color_tests" \ + --enable-hard-errors "$$am__enable_hard_errors" \ + --expect-failure "$$am__expect_failure" +# To be inserted before the command running the test. Creates the +# directory for the log if needed. Stores in $dir the directory +# containing $f, in $tst the test, in $log the log. Executes the +# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# passes TESTS_ENVIRONMENT. Set up options for the wrapper that +# will run the test scripts (or their associated LOG_COMPILER, if +# thy have one). +am__check_pre = \ +$(am__sh_e_setup); \ +$(am__vpath_adj_setup) $(am__vpath_adj) \ +$(am__tty_colors); \ +srcdir=$(srcdir); export srcdir; \ +case "$@" in \ + */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ + *) am__odir=.;; \ +esac; \ +test "x$$am__odir" = x"." || test -d "$$am__odir" \ + || $(MKDIR_P) "$$am__odir" || exit $$?; \ +if test -f "./$$f"; then dir=./; \ +elif test -f "$$f"; then dir=; \ +else dir="$(srcdir)/"; fi; \ +tst=$$dir$$f; log='$@'; \ +if test -n '$(DISABLE_HARD_ERRORS)'; then \ + am__enable_hard_errors=no; \ +else \ + am__enable_hard_errors=yes; \ +fi; \ +case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ + am__expect_failure=yes;; \ + *) \ + am__expect_failure=no;; \ +esac; \ +$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) +# A shell command to get the names of the tests scripts with any registered +# extension removed (i.e., equivalently, the names of the test logs, with +# the '.log' extension removed). The result is saved in the shell variable +# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, +# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", +# since that might cause problem with VPATH rewrites for suffix-less tests. +# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. +am__set_TESTS_bases = \ + bases='$(TEST_LOGS)'; \ + bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ + bases=`echo $$bases` +RECHECK_LOGS = $(TEST_LOGS) +TEST_SUITE_LOG = test-suite.log +TEST_EXTENSIONS = @EXEEXT@ .test +LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver +LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) +am__set_b = \ + case '$@' in \ + */*) \ + case '$*' in \ + */*) b='$*';; \ + *) b=`echo '$@' | sed 's/\.log$$//'`; \ + esac;; \ + *) \ + b='$*';; \ + esac +am__test_logs1 = $(TESTS:=.log) +am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) +TEST_LOGS = $(am__test_logs2:.test.log=.log) +TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver +TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ + $(TEST_LOG_FLAGS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz +GZIP_ENV = --best +DIST_TARGETS = dist-xz dist-gzip +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print + +#distribute headers in /usr/include/libpng/* +pkgincludedir = $(includedir)/$(PNGLIB_BASENAME) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_CCASFLAGS = @AM_CCASFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ + +# DFNCPP is normally just CPP - the C preprocessor - but on Solaris and maybe +# other operating systems (NeXT?) the C preprocessor selected by configure +# checks input tokens for validity - effectively it performs part of the ANSI-C +# parsing - and therefore fails with the .df files. configure.ac has special +# checks for this and sets DFNCPP appropriately. +DFNCPP = @DFNCPP@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PNGLIB_MAJOR = @PNGLIB_MAJOR@ +PNGLIB_MINOR = @PNGLIB_MINOR@ +PNGLIB_RELEASE = @PNGLIB_RELEASE@ +PNGLIB_VERSION = @PNGLIB_VERSION@ + +# PNG_COPTS give extra options for the C compiler to be used on all compilation +# steps (unless targe_CFLAGS is specified; that will take precedence over +# AM_CFLAGS) +PNG_COPTS = @PNG_COPTS@ +PNG_PREFIX = @PNG_PREFIX@ +POW_LIB = @POW_LIB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +SYMBOL_PREFIX = @SYMBOL_PREFIX@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ + +# generate the -config scripts if required +binconfigs = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ + +# pkg-config stuff, note that libpng.pc is always required in order +# to get the correct library +pkgconfigdir = @pkgconfigdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +PNGLIB_BASENAME = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@ +ACLOCAL_AMFLAGS = -I scripts +pngtest_SOURCES = pngtest.c +pngtest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +pngvalid_SOURCES = contrib/libtests/pngvalid.c +pngvalid_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +pngstest_SOURCES = contrib/libtests/pngstest.c +pngstest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +pngunknown_SOURCES = contrib/libtests/pngunknown.c +pngunknown_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la + +# Generally these are single line shell scripts to run a test with a particular +# set of parameters: +TESTS = \ + tests/pngtest\ + tests/pngvalid-gamma-16-to-8 tests/pngvalid-gamma-alpha-mode\ + tests/pngvalid-gamma-background tests/pngvalid-gamma-expand16-alpha-mode\ + tests/pngvalid-gamma-expand16-background\ + tests/pngvalid-gamma-expand16-transform tests/pngvalid-gamma-sbit\ + tests/pngvalid-gamma-threshold tests/pngvalid-gamma-transform\ + tests/pngvalid-progressive-interlace-size\ + tests/pngvalid-progressive-interlace-standard\ + tests/pngvalid-progressive-interlace-transform\ + tests/pngvalid-progressive-standard tests/pngvalid-standard\ + tests/pngstest-0g01 tests/pngstest-0g02 tests/pngstest-0g04\ + tests/pngstest-0g08 tests/pngstest-0g16 tests/pngstest-2c08\ + tests/pngstest-2c16 tests/pngstest-3p01 tests/pngstest-3p02\ + tests/pngstest-3p04 tests/pngstest-3p08 tests/pngstest-4a08\ + tests/pngstest-4a16 tests/pngstest-6a08 tests/pngstest-6a16\ + tests/pngstest-error tests/pngunknown-IDAT\ + tests/pngunknown-discard tests/pngunknown-if-safe tests/pngunknown-sAPI\ + tests/pngunknown-sTER tests/pngunknown-save tests/pngunknown-vpAg + + +# These tests are expected, and required, to fail: +XFAIL_TESTS = tests/pngstest-error + +# man pages +dist_man_MANS = libpng.3 libpngpf.3 png.5 +EXTRA_SCRIPTS = libpng-config libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config +bin_SCRIPTS = @binconfigs@ + +# rules to build libpng, only build the old library on request +lib_LTLIBRARIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +# EXTRA_LTLIBRARIES= libpng.la +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = png.c pngerror.c \ + pngget.c pngmem.c pngpread.c pngread.c pngrio.c pngrtran.c \ + pngrutil.c pngset.c pngtrans.c pngwio.c pngwrite.c pngwtran.c \ + pngwutil.c png.h pngconf.h pngdebug.h pnginfo.h pngpriv.h \ + pngstruct.h pngusr.dfa $(am__append_1) +nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = pnglibconf.h +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS = -no-undefined \ + -export-dynamic -version-number \ + @PNGLIB_MAJOR@@PNGLIB_MINOR@:@PNGLIB_RELEASE@:0 \ + $(am__append_2) $(am__append_3) $(am__append_4) +@HAVE_LD_VERSION_SCRIPT_FALSE@libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.sym +@HAVE_LD_VERSION_SCRIPT_TRUE@libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.vers +pkginclude_HEADERS = png.h pngconf.h +nodist_pkginclude_HEADERS = pnglibconf.h +pkgconfig_DATA = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc + +# Extra source distribution files, '${srcdir}' is used below to stop build files +# from those directories being included. This only works if the configure is +# not done in the source directory! +EXTRA_DIST = \ + ANNOUNCE CHANGES INSTALL LICENSE README TODO \ + pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \ + ${srcdir}/contrib ${srcdir}/projects ${srcdir}/scripts \ + $(TESTS) $(XFAIL_TESTS) tests/pngstest \ + CMakeLists.txt example.c libpng-manual.txt + +SCRIPT_CLEANFILES = scripts/*.out scripts/*.chk scripts/pnglibconf.dfn +CLEANFILES = *.tf? pngout.png libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc \ + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config libpng.vers libpng.sym \ + check.new pnglibconf.* pngprefix.h symbols.new pngtest-log.txt \ + $(SCRIPT_CLEANFILES) + +MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.guess config.h.in \ +config.sub configure depcomp install-sh ltmain.sh missing + +AM_CFLAGS = ${PNG_COPTS} +SUFFIXES = .chk .dfn .out + +# We must use -DPNG_NO_USE_READ_MACROS here even when the library may actually +# be built with PNG_USE_READ_MACROS; this prevents the read macros from +# interfering with the symbol file format. +SYMBOL_CFLAGS = -DPNGLIB_LIBNAME='PNG@PNGLIB_MAJOR@@PNGLIB_MINOR@_0' \ + -DPNGLIB_VERSION='@PNGLIB_VERSION@' \ + -DSYMBOL_PREFIX='$(SYMBOL_PREFIX)' -DPNG_NO_USE_READ_MACROS \ + -DPNG_BUILDING_SYMBOL_TABLE $(am__append_5) +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .chk .dfn .out .S .c .lo .log .o .obj .test .test$(EXEEXT) .trs +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @if test ! -f $@; then rm -f stamp-h1; else :; fi + @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +libpng.pc: $(top_builddir)/config.status $(srcdir)/libpng.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +libpng-config: $(top_builddir)/config.status $(srcdir)/libpng-config.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la: $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES) $(EXTRA_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES) + $(AM_V_CCLD)$(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LINK) -rpath $(libdir) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LIBADD) $(LIBS) + +clean-checkPROGRAMS: + @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +pngstest$(EXEEXT): $(pngstest_OBJECTS) $(pngstest_DEPENDENCIES) $(EXTRA_pngstest_DEPENDENCIES) + @rm -f pngstest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pngstest_OBJECTS) $(pngstest_LDADD) $(LIBS) +pngtest$(EXEEXT): $(pngtest_OBJECTS) $(pngtest_DEPENDENCIES) $(EXTRA_pngtest_DEPENDENCIES) + @rm -f pngtest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pngtest_OBJECTS) $(pngtest_LDADD) $(LIBS) +pngunknown$(EXEEXT): $(pngunknown_OBJECTS) $(pngunknown_DEPENDENCIES) $(EXTRA_pngunknown_DEPENDENCIES) + @rm -f pngunknown$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pngunknown_OBJECTS) $(pngunknown_LDADD) $(LIBS) +pngvalid$(EXEEXT): $(pngvalid_OBJECTS) $(pngvalid_DEPENDENCIES) $(EXTRA_pngvalid_DEPENDENCIES) + @rm -f pngvalid$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pngvalid_OBJECTS) $(pngvalid_LDADD) $(LIBS) +install-binSCRIPTS: $(bin_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arm_init.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filter_neon.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/png.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngerror.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngget.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngmem.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngpread.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngread.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrio.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrtran.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrutil.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngset.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngstest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtrans.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngunknown.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngvalid.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwio.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwrite.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwtran.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwutil.Plo@am__quote@ + +.S.o: +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ $< + +.S.obj: +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.S.lo: +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(LTCPPASCOMPILE) -c -o $@ $< + +filter_neon.lo: arm/filter_neon.S +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -MT filter_neon.lo -MD -MP -MF $(DEPDIR)/filter_neon.Tpo -c -o filter_neon.lo `test -f 'arm/filter_neon.S' || echo '$(srcdir)/'`arm/filter_neon.S +@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/filter_neon.Tpo $(DEPDIR)/filter_neon.Plo +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='arm/filter_neon.S' object='filter_neon.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -c -o filter_neon.lo `test -f 'arm/filter_neon.S' || echo '$(srcdir)/'`arm/filter_neon.S + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +arm_init.lo: arm/arm_init.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT arm_init.lo -MD -MP -MF $(DEPDIR)/arm_init.Tpo -c -o arm_init.lo `test -f 'arm/arm_init.c' || echo '$(srcdir)/'`arm/arm_init.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/arm_init.Tpo $(DEPDIR)/arm_init.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='arm/arm_init.c' object='arm_init.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o arm_init.lo `test -f 'arm/arm_init.c' || echo '$(srcdir)/'`arm/arm_init.c + +pngstest.o: contrib/libtests/pngstest.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pngstest.o -MD -MP -MF $(DEPDIR)/pngstest.Tpo -c -o pngstest.o `test -f 'contrib/libtests/pngstest.c' || echo '$(srcdir)/'`contrib/libtests/pngstest.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pngstest.Tpo $(DEPDIR)/pngstest.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='contrib/libtests/pngstest.c' object='pngstest.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pngstest.o `test -f 'contrib/libtests/pngstest.c' || echo '$(srcdir)/'`contrib/libtests/pngstest.c + +pngstest.obj: contrib/libtests/pngstest.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pngstest.obj -MD -MP -MF $(DEPDIR)/pngstest.Tpo -c -o pngstest.obj `if test -f 'contrib/libtests/pngstest.c'; then $(CYGPATH_W) 'contrib/libtests/pngstest.c'; else $(CYGPATH_W) '$(srcdir)/contrib/libtests/pngstest.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pngstest.Tpo $(DEPDIR)/pngstest.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='contrib/libtests/pngstest.c' object='pngstest.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pngstest.obj `if test -f 'contrib/libtests/pngstest.c'; then $(CYGPATH_W) 'contrib/libtests/pngstest.c'; else $(CYGPATH_W) '$(srcdir)/contrib/libtests/pngstest.c'; fi` + +pngunknown.o: contrib/libtests/pngunknown.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pngunknown.o -MD -MP -MF $(DEPDIR)/pngunknown.Tpo -c -o pngunknown.o `test -f 'contrib/libtests/pngunknown.c' || echo '$(srcdir)/'`contrib/libtests/pngunknown.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pngunknown.Tpo $(DEPDIR)/pngunknown.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='contrib/libtests/pngunknown.c' object='pngunknown.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pngunknown.o `test -f 'contrib/libtests/pngunknown.c' || echo '$(srcdir)/'`contrib/libtests/pngunknown.c + +pngunknown.obj: contrib/libtests/pngunknown.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pngunknown.obj -MD -MP -MF $(DEPDIR)/pngunknown.Tpo -c -o pngunknown.obj `if test -f 'contrib/libtests/pngunknown.c'; then $(CYGPATH_W) 'contrib/libtests/pngunknown.c'; else $(CYGPATH_W) '$(srcdir)/contrib/libtests/pngunknown.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pngunknown.Tpo $(DEPDIR)/pngunknown.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='contrib/libtests/pngunknown.c' object='pngunknown.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pngunknown.obj `if test -f 'contrib/libtests/pngunknown.c'; then $(CYGPATH_W) 'contrib/libtests/pngunknown.c'; else $(CYGPATH_W) '$(srcdir)/contrib/libtests/pngunknown.c'; fi` + +pngvalid.o: contrib/libtests/pngvalid.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pngvalid.o -MD -MP -MF $(DEPDIR)/pngvalid.Tpo -c -o pngvalid.o `test -f 'contrib/libtests/pngvalid.c' || echo '$(srcdir)/'`contrib/libtests/pngvalid.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pngvalid.Tpo $(DEPDIR)/pngvalid.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='contrib/libtests/pngvalid.c' object='pngvalid.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pngvalid.o `test -f 'contrib/libtests/pngvalid.c' || echo '$(srcdir)/'`contrib/libtests/pngvalid.c + +pngvalid.obj: contrib/libtests/pngvalid.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pngvalid.obj -MD -MP -MF $(DEPDIR)/pngvalid.Tpo -c -o pngvalid.obj `if test -f 'contrib/libtests/pngvalid.c'; then $(CYGPATH_W) 'contrib/libtests/pngvalid.c'; else $(CYGPATH_W) '$(srcdir)/contrib/libtests/pngvalid.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pngvalid.Tpo $(DEPDIR)/pngvalid.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='contrib/libtests/pngvalid.c' object='pngvalid.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pngvalid.obj `if test -f 'contrib/libtests/pngvalid.c'; then $(CYGPATH_W) 'contrib/libtests/pngvalid.c'; else $(CYGPATH_W) '$(srcdir)/contrib/libtests/pngvalid.c'; fi` + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt +install-man3: $(dist_man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(dist_man_MANS)'; \ + test -n "$(man3dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.3[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ + done; } + +uninstall-man3: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man3dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.3[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir) +install-man5: $(dist_man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(dist_man_MANS)'; \ + test -n "$(man5dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.5[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \ + done; } + +uninstall-man5: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man5dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.5[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir) +install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + done + +uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) +install-nodist_pkgincludeHEADERS: $(nodist_pkginclude_HEADERS) + @$(NORMAL_INSTALL) + @list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ + done + +uninstall-nodist_pkgincludeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir) +install-pkgincludeHEADERS: $(pkginclude_HEADERS) + @$(NORMAL_INSTALL) + @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ + done + +uninstall-pkgincludeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +# Recover from deleted '.trs' file; this should ensure that +# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create +# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells +# to avoid problems with "make -n". +.log.trs: + rm -f $< $@ + $(MAKE) $(AM_MAKEFLAGS) $< + +# Leading 'am--fnord' is there to ensure the list of targets does not +# exand to empty, as could happen e.g. with make check TESTS=''. +am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) +am--force-recheck: + @: + +$(TEST_SUITE_LOG): $(TEST_LOGS) + @$(am__set_TESTS_bases); \ + am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ + redo_bases=`for i in $$bases; do \ + am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ + done`; \ + if test -n "$$redo_bases"; then \ + redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ + redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ + if $(am__make_dryrun); then :; else \ + rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ + fi; \ + fi; \ + if test -n "$$am__remaking_logs"; then \ + echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ + "recursion detected" >&2; \ + else \ + am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ + fi; \ + if $(am__make_dryrun); then :; else \ + st=0; \ + errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ + for i in $$redo_bases; do \ + test -f $$i.trs && test -r $$i.trs \ + || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ + test -f $$i.log && test -r $$i.log \ + || { echo "$$errmsg $$i.log" >&2; st=1; }; \ + done; \ + test $$st -eq 0 || exit 1; \ + fi + @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ + ws='[ ]'; \ + results=`for b in $$bases; do echo $$b.trs; done`; \ + test -n "$$results" || results=/dev/null; \ + all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ + pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ + fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ + skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ + xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ + xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ + error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ + if test `expr $$fail + $$xpass + $$error` -eq 0; then \ + success=true; \ + else \ + success=false; \ + fi; \ + br='==================='; br=$$br$$br$$br$$br; \ + result_count () \ + { \ + if test x"$$1" = x"--maybe-color"; then \ + maybe_colorize=yes; \ + elif test x"$$1" = x"--no-color"; then \ + maybe_colorize=no; \ + else \ + echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + fi; \ + shift; \ + desc=$$1 count=$$2; \ + if test $$maybe_colorize = yes && test $$count -gt 0; then \ + color_start=$$3 color_end=$$std; \ + else \ + color_start= color_end=; \ + fi; \ + echo "$${color_start}# $$desc $$count$${color_end}"; \ + }; \ + create_testsuite_report () \ + { \ + result_count $$1 "TOTAL:" $$all "$$brg"; \ + result_count $$1 "PASS: " $$pass "$$grn"; \ + result_count $$1 "SKIP: " $$skip "$$blu"; \ + result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ + result_count $$1 "FAIL: " $$fail "$$red"; \ + result_count $$1 "XPASS:" $$xpass "$$red"; \ + result_count $$1 "ERROR:" $$error "$$mgn"; \ + }; \ + { \ + echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ + $(am__rst_title); \ + create_testsuite_report --no-color; \ + echo; \ + echo ".. contents:: :depth: 2"; \ + echo; \ + for b in $$bases; do echo $$b; done \ + | $(am__create_global_log); \ + } >$(TEST_SUITE_LOG).tmp || exit 1; \ + mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ + if $$success; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ + fi; \ + echo "$${col}$$br$${std}"; \ + echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ + echo "$${col}$$br$${std}"; \ + create_testsuite_report --maybe-color; \ + echo "$$col$$br$$std"; \ + if $$success; then :; else \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + if test -n "$(PACKAGE_BUGREPORT)"; then \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + fi; \ + echo "$$col$$br$$std"; \ + fi; \ + $$success || exit 1 + +check-TESTS: + @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list + @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + trs_list=`for i in $$bases; do echo $$i.trs; done`; \ + log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ + exit $$?; +recheck: all $(check_PROGRAMS) + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + bases=`for i in $$bases; do echo $$i; done \ + | $(am__list_recheck_tests)` || exit 1; \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + log_list=`echo $$log_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ + am__force_recheck=am--force-recheck \ + TEST_LOGS="$$log_list"; \ + exit $$? +tests/pngtest.log: tests/pngtest + @p='tests/pngtest'; \ + b='tests/pngtest'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-16-to-8.log: tests/pngvalid-gamma-16-to-8 + @p='tests/pngvalid-gamma-16-to-8'; \ + b='tests/pngvalid-gamma-16-to-8'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-alpha-mode.log: tests/pngvalid-gamma-alpha-mode + @p='tests/pngvalid-gamma-alpha-mode'; \ + b='tests/pngvalid-gamma-alpha-mode'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-background.log: tests/pngvalid-gamma-background + @p='tests/pngvalid-gamma-background'; \ + b='tests/pngvalid-gamma-background'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-expand16-alpha-mode.log: tests/pngvalid-gamma-expand16-alpha-mode + @p='tests/pngvalid-gamma-expand16-alpha-mode'; \ + b='tests/pngvalid-gamma-expand16-alpha-mode'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-expand16-background.log: tests/pngvalid-gamma-expand16-background + @p='tests/pngvalid-gamma-expand16-background'; \ + b='tests/pngvalid-gamma-expand16-background'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-expand16-transform.log: tests/pngvalid-gamma-expand16-transform + @p='tests/pngvalid-gamma-expand16-transform'; \ + b='tests/pngvalid-gamma-expand16-transform'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-sbit.log: tests/pngvalid-gamma-sbit + @p='tests/pngvalid-gamma-sbit'; \ + b='tests/pngvalid-gamma-sbit'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-threshold.log: tests/pngvalid-gamma-threshold + @p='tests/pngvalid-gamma-threshold'; \ + b='tests/pngvalid-gamma-threshold'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-transform.log: tests/pngvalid-gamma-transform + @p='tests/pngvalid-gamma-transform'; \ + b='tests/pngvalid-gamma-transform'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-progressive-interlace-size.log: tests/pngvalid-progressive-interlace-size + @p='tests/pngvalid-progressive-interlace-size'; \ + b='tests/pngvalid-progressive-interlace-size'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-progressive-interlace-standard.log: tests/pngvalid-progressive-interlace-standard + @p='tests/pngvalid-progressive-interlace-standard'; \ + b='tests/pngvalid-progressive-interlace-standard'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-progressive-interlace-transform.log: tests/pngvalid-progressive-interlace-transform + @p='tests/pngvalid-progressive-interlace-transform'; \ + b='tests/pngvalid-progressive-interlace-transform'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-progressive-standard.log: tests/pngvalid-progressive-standard + @p='tests/pngvalid-progressive-standard'; \ + b='tests/pngvalid-progressive-standard'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-standard.log: tests/pngvalid-standard + @p='tests/pngvalid-standard'; \ + b='tests/pngvalid-standard'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-0g01.log: tests/pngstest-0g01 + @p='tests/pngstest-0g01'; \ + b='tests/pngstest-0g01'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-0g02.log: tests/pngstest-0g02 + @p='tests/pngstest-0g02'; \ + b='tests/pngstest-0g02'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-0g04.log: tests/pngstest-0g04 + @p='tests/pngstest-0g04'; \ + b='tests/pngstest-0g04'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-0g08.log: tests/pngstest-0g08 + @p='tests/pngstest-0g08'; \ + b='tests/pngstest-0g08'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-0g16.log: tests/pngstest-0g16 + @p='tests/pngstest-0g16'; \ + b='tests/pngstest-0g16'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-2c08.log: tests/pngstest-2c08 + @p='tests/pngstest-2c08'; \ + b='tests/pngstest-2c08'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-2c16.log: tests/pngstest-2c16 + @p='tests/pngstest-2c16'; \ + b='tests/pngstest-2c16'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-3p01.log: tests/pngstest-3p01 + @p='tests/pngstest-3p01'; \ + b='tests/pngstest-3p01'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-3p02.log: tests/pngstest-3p02 + @p='tests/pngstest-3p02'; \ + b='tests/pngstest-3p02'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-3p04.log: tests/pngstest-3p04 + @p='tests/pngstest-3p04'; \ + b='tests/pngstest-3p04'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-3p08.log: tests/pngstest-3p08 + @p='tests/pngstest-3p08'; \ + b='tests/pngstest-3p08'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-4a08.log: tests/pngstest-4a08 + @p='tests/pngstest-4a08'; \ + b='tests/pngstest-4a08'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-4a16.log: tests/pngstest-4a16 + @p='tests/pngstest-4a16'; \ + b='tests/pngstest-4a16'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-6a08.log: tests/pngstest-6a08 + @p='tests/pngstest-6a08'; \ + b='tests/pngstest-6a08'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-6a16.log: tests/pngstest-6a16 + @p='tests/pngstest-6a16'; \ + b='tests/pngstest-6a16'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-error.log: tests/pngstest-error + @p='tests/pngstest-error'; \ + b='tests/pngstest-error'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-IDAT.log: tests/pngunknown-IDAT + @p='tests/pngunknown-IDAT'; \ + b='tests/pngunknown-IDAT'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-discard.log: tests/pngunknown-discard + @p='tests/pngunknown-discard'; \ + b='tests/pngunknown-discard'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-if-safe.log: tests/pngunknown-if-safe + @p='tests/pngunknown-if-safe'; \ + b='tests/pngunknown-if-safe'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-sAPI.log: tests/pngunknown-sAPI + @p='tests/pngunknown-sAPI'; \ + b='tests/pngunknown-sAPI'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-sTER.log: tests/pngunknown-sTER + @p='tests/pngunknown-sTER'; \ + b='tests/pngunknown-sTER'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-save.log: tests/pngunknown-save + @p='tests/pngunknown-save'; \ + b='tests/pngunknown-save'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-vpAg.log: tests/pngunknown-vpAg + @p='tests/pngunknown-vpAg'; \ + b='tests/pngunknown-vpAg'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +.test.log: + @p='$<'; \ + $(am__set_b); \ + $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +@am__EXEEXT_TRUE@.test$(EXEEXT).log: +@am__EXEEXT_TRUE@ @p='$<'; \ +@am__EXEEXT_TRUE@ $(am__set_b); \ +@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ +@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ +@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ +@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__post_remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-am +all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(MANS) $(DATA) $(HEADERS) \ + config.h +installdirs: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgincludedir)" "$(DESTDIR)$(pkgincludedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ + clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-man install-nodist_pkgincludeHEADERS \ + install-pkgconfigDATA install-pkgincludeHEADERS + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binSCRIPTS install-libLTLIBRARIES + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-exec-hook +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man3 install-man5 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binSCRIPTS uninstall-libLTLIBRARIES \ + uninstall-man uninstall-nodist_pkgincludeHEADERS \ + uninstall-pkgconfigDATA uninstall-pkgincludeHEADERS + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) uninstall-hook +uninstall-man: uninstall-man3 uninstall-man5 + +.MAKE: all check-am install-am install-data-am install-exec-am \ + install-strip uninstall-am + +.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-TESTS \ + check-am clean clean-checkPROGRAMS clean-cscope clean-generic \ + clean-libLTLIBRARIES clean-libtool cscope cscopelist-am ctags \ + ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \ + dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \ + distclean distclean-compile distclean-generic distclean-hdr \ + distclean-libtool distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-binSCRIPTS install-data \ + install-data-am install-data-hook install-dvi install-dvi-am \ + install-exec install-exec-am install-exec-hook install-html \ + install-html-am install-info install-info-am \ + install-libLTLIBRARIES install-man install-man3 install-man5 \ + install-nodist_pkgincludeHEADERS install-pdf install-pdf-am \ + install-pkgconfigDATA install-pkgincludeHEADERS install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am recheck tags tags-am \ + uninstall uninstall-am uninstall-binSCRIPTS uninstall-hook \ + uninstall-libLTLIBRARIES uninstall-man uninstall-man3 \ + uninstall-man5 uninstall-nodist_pkgincludeHEADERS \ + uninstall-pkgconfigDATA uninstall-pkgincludeHEADERS + + +$(PNGLIB_BASENAME).pc: libpng.pc + cp libpng.pc $@ + +$(PNGLIB_BASENAME)-config: libpng-config + cp libpng-config $@ + +scripts/sym.out scripts/vers.out: png.h pngconf.h pnglibconf.h +scripts/prefix.out: png.h pngconf.h pnglibconf.out +scripts/symbols.out: png.h pngconf.h $(srcdir)/scripts/pnglibconf.h.prebuilt +scripts/intprefix.out: pnglibconf.h + +libpng.sym: scripts/sym.out + rm -f $@ + cp $? $@ +libpng.vers: scripts/vers.out + rm -f $@ + cp $? $@ + +# Rename functions in scripts/prefix.out with a PNG_PREFIX prefix. +# Rename macros in scripts/macro.lst from PNG_PREFIXpng_ to PNG_ (the actual +# implementation of the macro). +@DO_PNG_PREFIX_TRUE@pnglibconf.h: pnglibconf.out scripts/prefix.out scripts/macro.lst +@DO_PNG_PREFIX_TRUE@ rm -f $@ +@DO_PNG_PREFIX_TRUE@ $(AWK) 's==0 && NR>1{print prev}\ +@DO_PNG_PREFIX_TRUE@ s==0{prev=$$0}\ +@DO_PNG_PREFIX_TRUE@ s==1{print "#define", $$1, "@PNG_PREFIX@" $$1}\ +@DO_PNG_PREFIX_TRUE@ s==2{print "#define @PNG_PREFIX@png_" $$1, "PNG_" $$1}\ +@DO_PNG_PREFIX_TRUE@ END{print prev}' s=0 pnglibconf.out s=1 scripts/prefix.out\ +@DO_PNG_PREFIX_TRUE@ s=2 ${srcdir}/scripts/macro.lst >pnglibconf.tf8 +@DO_PNG_PREFIX_TRUE@ mv pnglibconf.tf8 $@ + +@DO_PNG_PREFIX_TRUE@pngprefix.h: scripts/intprefix.out +@DO_PNG_PREFIX_TRUE@ rm -f pngprefix.tf1 +@DO_PNG_PREFIX_TRUE@ $(AWK) '{print "#define", $$1, "@PNG_PREFIX@" $$1}' $? >pngprefix.tf1 +@DO_PNG_PREFIX_TRUE@ mv pngprefix.tf1 $@ +@DO_PNG_PREFIX_FALSE@pnglibconf.h: pnglibconf.out +@DO_PNG_PREFIX_FALSE@ rm -f $@ +@DO_PNG_PREFIX_FALSE@ cp $? $@ + +@DO_PNG_PREFIX_FALSE@pngprefix.h: # is empty +@DO_PNG_PREFIX_FALSE@ :>$@ + +$(srcdir)/scripts/pnglibconf.h.prebuilt: + @echo "Attempting to build $@" >&2 + @echo "This is a machine generated file, but if you want to make" >&2 + @echo "a new one simply make 'scripts/pnglibconf.out' and copy that" >&2 + @exit 1 + +# The following is necessary to ensure that the local pnglibconf.h is used, not +# an installed one (this can happen immediately after on a clean system if +# 'make test' is the first thing the user does.) +contrib/libtests/pngstest.o contrib/libtests/pngvalid.o pngtest.o: pnglibconf.h +contrib/libtests/pngunknown.o: pnglibconf.h + +.dfn.out: + rm -f $@ $*.c $*.tf[12] + test -d scripts || mkdir scripts || test -d scripts + echo '#include "$<"' >$*.c + $(DFNCPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)\ + $(CPPFLAGS) $(SYMBOL_CFLAGS) $*.c > $*.tf1 + $(AWK) -f "${srcdir}/scripts/dfn.awk" out="$*.tf2" $*.tf1 1>&2 + rm -f $*.c $*.tf1 + mv $*.tf2 $@ + +# The .dfn file for pnglibconf.h is machine generated +pnglibconf.dfn: scripts/pnglibconf.dfa scripts/options.awk pngconf.h pngusr.dfa $(DFA_XTRA) + rm -f $@ $*.tf[45] + $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf4 version=search\ + ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\ + ${srcdir}/pngusr.dfa $(DFA_XTRA) 1>&2 + $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf5 $*.tf4 1>&2 + rm $*.tf4 + mv $*.tf5 $@ + +# Symbol checks (.def and .out files should match) +scripts/symbols.chk: scripts/checksym.awk scripts/symbols.def scripts/symbols.out + +.out.chk: + rm -f $@ $*.new + $(AWK) -f ${srcdir}/scripts/checksym.awk ${srcdir}/scripts/${*F}.def\ + of="$*.new" $< >&2 + mv $*.new $@ + +# used on demand to regenerate the standard header, CPPFLAGS should +# be empty - no non-standard defines +scripts/pnglibconf.dfn: scripts/pnglibconf.dfa scripts/options.awk pngconf.h + rm -f $@ pnglibconf.tf[67] + test -z "$(CPPFLAGS)" + echo "com @PNGLIB_VERSION@ STANDARD API DEFINITION" |\ + $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf6\ + logunsupported=1 version=search ${srcdir}/pngconf.h -\ + ${srcdir}/scripts/pnglibconf.dfa 1>&2 + $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf7\ + pnglibconf.tf6 1>&2 + rm pnglibconf.tf6 + mv pnglibconf.tf7 $@ + +$(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS): png.h pngconf.h \ + pnglibconf.h pngpriv.h pngdebug.h pnginfo.h pngstruct.h pngprefix.h + +test: check-am + +# Extra checks +check: scripts/symbols.chk + +# Don't distribute the generated script files +dist-hook: + cd '$(top_distdir)'; rm -f $(SCRIPT_CLEANFILES) + +# install the .../include headers as links to the new ones +install-data-hook: + cd '$(DESTDIR)$(includedir)'; rm -f png.h pngconf.h pnglibconf.h + cd '$(DESTDIR)$(includedir)'; $(LN_S) $(PNGLIB_BASENAME)/png.h png.h + cd '$(DESTDIR)$(includedir)'; $(LN_S) $(PNGLIB_BASENAME)/pngconf.h \ + pngconf.h + cd '$(DESTDIR)$(includedir)'; $(LN_S) $(PNGLIB_BASENAME)/pnglibconf.h \ + pnglibconf.h + cd '$(DESTDIR)$(pkgconfigdir)'; rm -f libpng.pc + cd '$(DESTDIR)$(pkgconfigdir)'; $(LN_S) $(PNGLIB_BASENAME).pc libpng.pc + +# do evil things to libpng to cause libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@ to be used +install-exec-hook: + cd '$(DESTDIR)$(bindir)'; rm -f libpng-config + cd '$(DESTDIR)$(bindir)';\ + $(LN_S) $(PNGLIB_BASENAME)-config libpng-config + @set -x;\ + cd '$(DESTDIR)$(libdir)';\ + for ext in a la so so.@PNGLIB_MAJOR@@PNGLIB_MINOR@.@PNGLIB_RELEASE@\ + sl dylib dll.a; do\ + rm -f libpng.$$ext;\ + if test -f $(PNGLIB_BASENAME).$$ext; then\ + $(LN_S) $(PNGLIB_BASENAME).$$ext libpng.$$ext;\ + fi;\ + done + +uninstall-hook: + cd '$(DESTDIR)$(includedir)'; rm -f png.h pngconf.h pnglibconf.h + rm -f '$(DESTDIR)$(pkgconfigdir)/libpng.pc' + rm -f '$(DESTDIR)$(bindir)/libpng-config' + rm -f '$(DESTDIR)$(libdir)/libpng.a' + rm -f '$(DESTDIR)$(libdir)/libpng.la' + rm -f '$(DESTDIR)$(libdir)/libpng.so' + rm -f '$(DESTDIR)$(libdir)/libpng.so.@PNGLIB_MAJOR@@PNGLIB_MINOR@.@PNGLIB_RELEASE@' + rm -f '$(DESTDIR)$(libdir)/libpng.sl' + rm -f '$(DESTDIR)$(libdir)/libpng.dylib' + rm -f '$(DESTDIR)$(libdir)/libpng.dll.a' + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/SDL2/external/libpng-1.6.2/README b/src/SDL2/external/libpng-1.6.2/README new file mode 100644 index 000000000..26301a5aa --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/README @@ -0,0 +1,202 @@ +README for libpng version 1.6.2 - April 25, 2013 (shared library 16.0) +See the note about version numbers near the top of png.h + +See INSTALL for instructions on how to install libpng. + +Libpng comes in several distribution formats. Get libpng-*.tar.gz, +libpng-*.tar.xz or libpng-*.tar.bz2 if you want UNIX-style line endings +in the text files, or lpng*.zip if you want DOS-style line endings. + +Version 0.89 was the first official release of libpng. Don't let the +fact that it's the first release fool you. The libpng library has been in +extensive use and testing since mid-1995. By late 1997 it had +finally gotten to the stage where there hadn't been significant +changes to the API in some time, and people have a bad feeling about +libraries with versions < 1.0. Version 1.0.0 was released in +March 1998. + +**** +Note that some of the changes to the png_info structure render this +version of the library binary incompatible with libpng-0.89 or +earlier versions if you are using a shared library. The type of the +"filler" parameter for png_set_filler() has changed from png_byte to +png_uint_32, which will affect shared-library applications that use +this function. + +To avoid problems with changes to the internals of png_info_struct, +new APIs have been made available in 0.95 to avoid direct application +access to info_ptr. These functions are the png_set_ and +png_get_ functions. These functions should be used when +accessing/storing the info_struct data, rather than manipulating it +directly, to avoid such problems in the future. + +It is important to note that the APIs do not make current programs +that access the info struct directly incompatible with the new +library. However, it is strongly suggested that new programs use +the new APIs (as shown in example.c and pngtest.c), and older programs +be converted to the new format, to facilitate upgrades in the future. +**** + +Additions since 0.90 include the ability to compile libpng as a +Windows DLL, and new APIs for accessing data in the info struct. +Experimental functions include the ability to set weighting and cost +factors for row filter selection, direct reads of integers from buffers +on big-endian processors that support misaligned data access, faster +methods of doing alpha composition, and more accurate 16->8 bit color +conversion. + +The additions since 0.89 include the ability to read from a PNG stream +which has had some (or all) of the signature bytes read by the calling +application. This also allows the reading of embedded PNG streams that +do not have the PNG file signature. As well, it is now possible to set +the library action on the detection of chunk CRC errors. It is possible +to set different actions based on whether the CRC error occurred in a +critical or an ancillary chunk. + +The changes made to the library, and bugs fixed are based on discussions +on the PNG-implement mailing list and not on material submitted +privately to Guy, Andreas, or Glenn. They will forward any good +suggestions to the list. + +For a detailed description on using libpng, read libpng-manual.txt. For +examples of libpng in a program, see example.c and pngtest.c. For usage +information and restrictions (what little they are) on libpng, see +png.h. For a description on using zlib (the compression library used by +libpng) and zlib's restrictions, see zlib.h + +I have included a general makefile, as well as several machine and +compiler specific ones, but you may have to modify one for your own needs. + +You should use zlib 1.0.4 or later to run this, but it MAY work with +versions as old as zlib 0.95. Even so, there are bugs in older zlib +versions which can cause the output of invalid compression streams for +some images. You will definitely need zlib 1.0.4 or later if you are +taking advantage of the MS-DOS "far" structure allocation for the small +and medium memory models. You should also note that zlib is a +compression library that is useful for more things than just PNG files. +You can use zlib as a drop-in replacement for fread() and fwrite() if +you are so inclined. + +zlib should be available at the same place that libpng is, or at. +ftp://ftp.info-zip.org/pub/infozip/zlib + +You may also want a copy of the PNG specification. It is available +as an RFC, a W3C Recommendation, and an ISO/IEC Standard. You can find +these at http://www.libpng.org/pub/png/documents/ + +This code is currently being archived at libpng.sf.net in the +[DOWNLOAD] area, and on CompuServe, Lib 20 (PNG SUPPORT) +at GO GRAPHSUP. If you can't find it in any of those places, +e-mail me, and I'll help you find it. + +If you have any code changes, requests, problems, etc., please e-mail +them to me. Also, I'd appreciate any make files or project files, +and any modifications you needed to make to get libpng to compile, +along with a #define variable to tell what compiler/system you are on. +If you needed to add transformations to libpng, or wish libpng would +provide the image in a different way, drop me a note (and code, if +possible), so I can consider supporting the transformation. +Finally, if you get any warning messages when compiling libpng +(note: not zlib), and they are easy to fix, I'd appreciate the +fix. Please mention "libpng" somewhere in the subject line. Thanks. + +This release was created and will be supported by myself (of course +based in a large way on Guy's and Andreas' earlier work), and the PNG +development group. + +Send comments/corrections/commendations to png-mng-implement at +lists.sourceforge.net (subscription required; visit +https://lists.sourceforge.net/lists/listinfo/png-mng-implement +to subscribe) or to glennrp at users.sourceforge.net + +You can't reach Guy, the original libpng author, at the addresses +given in previous versions of this document. He and Andreas will +read mail addressed to the png-implement list, however. + +Please do not send general questions about PNG. Send them to +png-mng-misc at lists.sf.net (subscription required; visit +https://lists.sourceforge.net/lists/listinfo/png-mng-misc to +subscribe). If you have a question about something +in the PNG specification that is related to using libpng, send it +to me. Send me any questions that start with "I was using libpng, +and ...". If in doubt, send questions to me. I'll bounce them +to others, if necessary. + +Please do not send suggestions on how to change PNG. We have +been discussing PNG for sixteen years now, and it is official and +finished. If you have suggestions for libpng, however, I'll +gladly listen. Even if your suggestion is not used immediately, +it may be used later. + +Files in this distribution: + + ANNOUNCE => Announcement of this version, with recent changes + CHANGES => Description of changes between libpng versions + KNOWNBUG => List of known bugs and deficiencies + LICENSE => License to use and redistribute libpng + README => This file + TODO => Things not implemented in the current library + Y2KINFO => Statement of Y2K compliance + example.c => Example code for using libpng functions + libpng.3 => manual page for libpng (includes libpng-manual.txt) + libpng-manual.txt => Description of libpng and its functions + libpngpf.3 => manual page for libpng's private functions + png.5 => manual page for the PNG format + png.c => Basic interface functions common to library + png.h => Library function and interface declarations (public) + pngpriv.h => Library function and interface declarations (private) + pngconf.h => System specific library configuration (public) + pngstruct.h => png_struct declaration (private) + pnginfo.h => png_info struct declaration (private) + pngdebug.h => debugging macros (private) + pngerror.c => Error/warning message I/O functions + pngget.c => Functions for retrieving info from struct + pngmem.c => Memory handling functions + pngbar.png => PNG logo, 88x31 + pngnow.png => PNG logo, 98x31 + pngpread.c => Progressive reading functions + pngread.c => Read data/helper high-level functions + pngrio.c => Lowest-level data read I/O functions + pngrtran.c => Read data transformation functions + pngrutil.c => Read data utility functions + pngset.c => Functions for storing data into the info_struct + pngtest.c => Library test program + pngtest.png => Library test sample image + pngtrans.c => Common data transformation functions + pngwio.c => Lowest-level write I/O functions + pngwrite.c => High-level write functions + pngwtran.c => Write data transformations + pngwutil.c => Write utility functions + contrib => Contributions + gregbook => source code for PNG reading and writing, from + Greg Roelofs' "PNG: The Definitive Guide", + O'Reilly, 1999 + msvctest => Builds and runs pngtest using a MSVC workspace + pngminus => Simple pnm2png and png2pnm programs + pngsuite => Test images + visupng => Contains a MSVC workspace for VisualPng + projects => Contains project files and workspaces for + building a DLL + cbuilder5 => Contains a Borland workspace for building + libpng and zlib + visualc6 => Contains a Microsoft Visual C++ (MSVC) + workspace for building libpng and zlib + visualc71 => Contains a Microsoft Visual C++ (MSVC) + workspace for building libpng and zlib + xcode => Contains an Apple xcode + workspace for building libpng and zlib + scripts => Directory containing scripts for building libpng: + (see scripts/README.txt for the list of scripts) + +Good luck, and happy coding. + +-Glenn Randers-Pehrson (current maintainer, since 1998) + Internet: glennrp at users.sourceforge.net + +-Andreas Eric Dilger (former maintainer, 1996-1997) + Internet: adilger at enel.ucalgary.ca + Web: http://www-mddsp.enel.ucalgary.ca/People/adilger/ + +-Guy Eric Schalnat (original author and former maintainer, 1995-1996) + (formerly of Group 42, Inc) + Internet: gschal at infinet.com diff --git a/src/SDL2/external/libpng-1.6.2/TODO b/src/SDL2/external/libpng-1.6.2/TODO new file mode 100644 index 000000000..6e1f028bd --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/TODO @@ -0,0 +1,27 @@ +/* +TODO - list of things to do for libpng: + +Final bug fixes. +Better C++ wrapper/full C++ implementation? +Fix problem with C++ and EXTERN "C". +cHRM transformation. +Remove setjmp/longjmp usage in favor of returning error codes. +Add "grayscale->palette" transformation and "palette->grayscale" detection. +Improved dithering. +Multi-lingual error and warning message support. +Complete sRGB transformation (presently it simply uses gamma=0.45455). +Man pages for function calls. +Better documentation. +Better filter selection + (counting huffman bits/precompression? filter inertia? filter costs?). +Histogram creation. +Text conversion between different code pages (Latin-1 -> Mac and DOS). +Avoid building gamma tables whenever possible. +Use greater precision when changing to linear gamma for compositing against + background and doing rgb-to-gray transformation. +Investigate pre-incremented loop counters and other loop constructions. +Add interpolated method of handling interlacing. +Switch to the simpler zlib (zlib/libpng) license if legally possible. +Extend pngvalid.c to validate more of the libpng transformations. + +*/ diff --git a/src/SDL2/external/libpng-1.6.2/aclocal.m4 b/src/SDL2/external/libpng-1.6.2/aclocal.m4 new file mode 100644 index 000000000..c2233b72a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/aclocal.m4 @@ -0,0 +1,1062 @@ +# generated automatically by aclocal 1.13 -*- Autoconf -*- + +# Copyright (C) 1996-2012 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# Copyright (C) 2002-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.13' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.13], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.13])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# Figure out how to run the assembler. -*- Autoconf -*- + +# Copyright (C) 2001-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_AS +# ---------- +AC_DEFUN([AM_PROG_AS], +[# By default we simply use the C compiler to build assembly code. +AC_REQUIRE([AC_PROG_CC]) +test "${CCAS+set}" = set || CCAS=$CC +test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS +AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)]) +AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)]) +_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl +]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each '.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) + +# Copyright (C) 2003-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless 'enable' is passed literally. +# For symmetry, 'disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. +AC_DEFUN([AM_MAINTAINER_MODE], +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], + [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], + am_maintainer_other[ make rules and dependencies not useful + (and sometimes confusing) to the casual installer])], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST([MAINT])dnl +] +) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of '-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([scripts/libtool.m4]) +m4_include([scripts/ltoptions.m4]) +m4_include([scripts/ltsugar.m4]) +m4_include([scripts/ltversion.m4]) +m4_include([scripts/lt~obsolete.m4]) diff --git a/src/SDL2/external/libpng-1.6.2/arm/arm_init.c b/src/SDL2/external/libpng-1.6.2/arm/arm_init.c new file mode 100644 index 000000000..795dd4938 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/arm/arm_init.c @@ -0,0 +1,219 @@ + +/* arm_init.c - NEON optimised filter functions + * + * Copyright (c) 2013 Glenn Randers-Pehrson + * Written by Mans Rullgard, 2011. + * Last changed in libpng 1.5.15 [March 28, 2013] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ +/* Below, after checking __linux__, various non-C90 POSIX 1003.1 functions are + * called. + */ +#define _POSIX_SOURCE 1 + +#include "../pngpriv.h" + +#ifdef PNG_ARM_NEON_SUPPORTED +#ifdef PNG_ARM_NEON_CHECK_SUPPORTED /* Do run-time checks */ +#include /* for sig_atomic_t */ + +#ifdef __ANDROID__ +/* Linux provides access to information about CPU capabilites via + * /proc/self/auxv, however Android blocks this while still claiming to be + * Linux. The Andoid NDK, however, provides appropriate support. + * + * Documentation: http://www.kandroid.org/ndk/docs/CPU-ARM-NEON.html + */ +#include + +static int +png_have_neon(png_structp png_ptr) +{ + /* This is a whole lot easier than the mess below, however it is probably + * implemented as below, therefore it is better to cache the result (these + * function calls may be slow!) + */ + PNG_UNUSED(png_ptr) + return android_getCpuFamily() == ANDROID_CPU_FAMILY_ARM && + (android_getCpuFeatures() & ANDROID_CPU_ARM_FEATURE_NEON) != 0; +} +#elif defined(__linux__) +/* The generic __linux__ implementation requires reading /proc/self/auxv and + * looking at each element for one that records NEON capabilities. + */ +#include /* for POSIX 1003.1 */ +#include /* for EINTR */ + +#include +#include +#include +#include +#include + +/* A read call may be interrupted, in which case it returns -1 and sets errno to + * EINTR if nothing was done, otherwise (if something was done) a partial read + * may result. + */ +static size_t +safe_read(png_structp png_ptr, int fd, void *buffer_in, size_t nbytes) +{ + size_t ntotal = 0; + char *buffer = png_voidcast(char*, buffer_in); + + while (nbytes > 0) + { + unsigned int nread; + int iread; + + /* Passing nread > INT_MAX to read is implementation defined in POSIX + * 1003.1, therefore despite the unsigned argument portable code must + * limit the value to INT_MAX! + */ + if (nbytes > INT_MAX) + nread = INT_MAX; + + else + nread = (unsigned int)/*SAFE*/nbytes; + + iread = read(fd, buffer, nread); + + if (iread == -1) + { + /* This is the devil in the details, a read can terminate early with 0 + * bytes read because of EINTR, yet it still returns -1 otherwise end + * of file cannot be distinguished. + */ + if (errno != EINTR) + { + png_warning(png_ptr, "/proc read failed"); + return 0; /* I.e. a permanent failure */ + } + } + + else if (iread < 0) + { + /* Not a valid 'read' result: */ + png_warning(png_ptr, "OS /proc read bug"); + return 0; + } + + else if (iread > 0) + { + /* Continue reading until a permanent failure, or EOF */ + buffer += iread; + nbytes -= (unsigned int)/*SAFE*/iread; + ntotal += (unsigned int)/*SAFE*/iread; + } + + else + return ntotal; + } + + return ntotal; /* nbytes == 0 */ +} + +static int +png_have_neon(png_structp png_ptr) +{ + int fd = open("/proc/self/auxv", O_RDONLY); + Elf32_auxv_t aux; + + /* Failsafe: failure to open means no NEON */ + if (fd == -1) + { + png_warning(png_ptr, "/proc/self/auxv open failed"); + return 0; + } + + while (safe_read(png_ptr, fd, &aux, sizeof aux) == sizeof aux) + { + if (aux.a_type == AT_HWCAP && (aux.a_un.a_val & HWCAP_NEON) != 0) + { + close(fd); + return 1; + } + } + + close(fd); + return 0; +} +#else + /* We don't know how to do a run-time check on this system */ +# error "no support for run-time ARM NEON checks" +#endif /* OS checks */ +#endif /* PNG_ARM_NEON_CHECK_SUPPORTED */ + +#ifndef PNG_ALIGNED_MEMORY_SUPPORTED +# error "ALIGNED_MEMORY is required; set: -DPNG_ALIGNED_MEMORY_SUPPORTED" +#endif + +void +png_init_filter_functions_neon(png_structp pp, unsigned int bpp) +{ +#ifdef PNG_ARM_NEON_API_SUPPORTED + switch ((pp->options >> PNG_ARM_NEON) & 3) + { + case PNG_OPTION_UNSET: + /* Allow the run-time check to execute if it has been enabled - + * thus both API and CHECK can be turned on. If it isn't supported + * this case will fall through to the 'default' below, which just + * returns. + */ +#endif /* PNG_ARM_NEON_API_SUPPORTED */ +#ifdef PNG_ARM_NEON_CHECK_SUPPORTED + { + static volatile sig_atomic_t no_neon = -1; /* not checked */ + + if (no_neon < 0) + no_neon = !png_have_neon(pp); + + if (no_neon) + return; + } +#ifdef PNG_ARM_NEON_API_SUPPORTED + break; +#endif +#endif /* PNG_ARM_NEON_CHECK_SUPPORTED */ +#ifdef PNG_ARM_NEON_API_SUPPORTED + case PNG_OPTION_ON: + /* Option turned on */ + break; + + default: /* OFF or INVALID */ + return; + } +#endif + + /* IMPORTANT: any new external functions used here must be declared using + * PNG_INTERNAL_FUNCTION in ../pngpriv.h. This is required so that the + * 'prefix' option to configure works: + * + * ./configure --with-libpng-prefix=foobar_ + * + * Verify you have got this right by running the above command, doing a build + * and examining pngprefix.h; it must contain a #define for every external + * function you add. (Notice that this happens automatically for the + * initialization function.) + */ + pp->read_filter[PNG_FILTER_VALUE_UP-1] = png_read_filter_row_up_neon; + + if (bpp == 3) + { + pp->read_filter[PNG_FILTER_VALUE_SUB-1] = png_read_filter_row_sub3_neon; + pp->read_filter[PNG_FILTER_VALUE_AVG-1] = png_read_filter_row_avg3_neon; + pp->read_filter[PNG_FILTER_VALUE_PAETH-1] = + png_read_filter_row_paeth3_neon; + } + + else if (bpp == 4) + { + pp->read_filter[PNG_FILTER_VALUE_SUB-1] = png_read_filter_row_sub4_neon; + pp->read_filter[PNG_FILTER_VALUE_AVG-1] = png_read_filter_row_avg4_neon; + pp->read_filter[PNG_FILTER_VALUE_PAETH-1] = + png_read_filter_row_paeth4_neon; + } +} +#endif /* FILTER_OPTIMIZATIONS && __arm__ && __ARM_NEON__ */ diff --git a/src/SDL2/external/libpng-1.6.2/arm/filter_neon.S b/src/SDL2/external/libpng-1.6.2/arm/filter_neon.S new file mode 100644 index 000000000..72420a9e3 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/arm/filter_neon.S @@ -0,0 +1,235 @@ + +/* filter_neon.S - NEON optimised filter functions + * + * Copyright (c) 2011 Glenn Randers-Pehrson + * Written by Mans Rullgard, 2011. + * Last changed in libpng 1.5.7 [December 15, 2011] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +/* This is required to get the symbol renames, which are #defines, and also + * includes the value of PNG_FILTER_OPTIMIZATIONS. + */ +#define PNG_VERSION_INFO_ONLY +#include "../pngpriv.h" + +#if defined(PNG_FILTER_OPTIMIZATIONS) && defined(__arm__) && \ + defined(__ARM_NEON__) +#if defined(__linux__) && defined(__ELF__) +.section .note.GNU-stack,"",%progbits /* mark stack as non-executable */ +#endif + +#ifdef __ELF__ +# define ELF +#else +# define ELF @ +#endif + + .arch armv7-a + .fpu neon + +.macro func name, export=0 + .macro endfunc +ELF .size \name, . - \name + .endfunc + .purgem endfunc + .endm + .text + .if \export + .global \name + .endif +ELF .type \name, STT_FUNC + .func \name +\name: +.endm + +func png_read_filter_row_sub4_neon, export=1 + ldr r3, [r0, #4] @ rowbytes + vmov.i8 d3, #0 +1: + vld4.32 {d4[],d5[],d6[],d7[]}, [r1,:128] + vadd.u8 d0, d3, d4 + vadd.u8 d1, d0, d5 + vadd.u8 d2, d1, d6 + vadd.u8 d3, d2, d7 + vst4.32 {d0[0],d1[0],d2[0],d3[0]},[r1,:128]! + subs r3, r3, #16 + bgt 1b + + bx lr +endfunc + +func png_read_filter_row_sub3_neon, export=1 + ldr r3, [r0, #4] @ rowbytes + vmov.i8 d3, #0 + mov r0, r1 + mov r2, #3 + mov r12, #12 + vld1.8 {q11}, [r0], r12 +1: + vext.8 d5, d22, d23, #3 + vadd.u8 d0, d3, d22 + vext.8 d6, d22, d23, #6 + vadd.u8 d1, d0, d5 + vext.8 d7, d23, d23, #1 + vld1.8 {q11}, [r0], r12 + vst1.32 {d0[0]}, [r1,:32], r2 + vadd.u8 d2, d1, d6 + vst1.32 {d1[0]}, [r1], r2 + vadd.u8 d3, d2, d7 + vst1.32 {d2[0]}, [r1], r2 + vst1.32 {d3[0]}, [r1], r2 + subs r3, r3, #12 + bgt 1b + + bx lr +endfunc + +func png_read_filter_row_up_neon, export=1 + ldr r3, [r0, #4] @ rowbytes +1: + vld1.8 {q0}, [r1,:128] + vld1.8 {q1}, [r2,:128]! + vadd.u8 q0, q0, q1 + vst1.8 {q0}, [r1,:128]! + subs r3, r3, #16 + bgt 1b + + bx lr +endfunc + +func png_read_filter_row_avg4_neon, export=1 + ldr r12, [r0, #4] @ rowbytes + vmov.i8 d3, #0 +1: + vld4.32 {d4[],d5[],d6[],d7[]}, [r1,:128] + vld4.32 {d16[],d17[],d18[],d19[]},[r2,:128]! + vhadd.u8 d0, d3, d16 + vadd.u8 d0, d0, d4 + vhadd.u8 d1, d0, d17 + vadd.u8 d1, d1, d5 + vhadd.u8 d2, d1, d18 + vadd.u8 d2, d2, d6 + vhadd.u8 d3, d2, d19 + vadd.u8 d3, d3, d7 + vst4.32 {d0[0],d1[0],d2[0],d3[0]},[r1,:128]! + subs r12, r12, #16 + bgt 1b + + bx lr +endfunc + +func png_read_filter_row_avg3_neon, export=1 + push {r4,lr} + ldr r12, [r0, #4] @ rowbytes + vmov.i8 d3, #0 + mov r0, r1 + mov r4, #3 + mov lr, #12 + vld1.8 {q11}, [r0], lr +1: + vld1.8 {q10}, [r2], lr + vext.8 d5, d22, d23, #3 + vhadd.u8 d0, d3, d20 + vext.8 d17, d20, d21, #3 + vadd.u8 d0, d0, d22 + vext.8 d6, d22, d23, #6 + vhadd.u8 d1, d0, d17 + vext.8 d18, d20, d21, #6 + vadd.u8 d1, d1, d5 + vext.8 d7, d23, d23, #1 + vld1.8 {q11}, [r0], lr + vst1.32 {d0[0]}, [r1,:32], r4 + vhadd.u8 d2, d1, d18 + vst1.32 {d1[0]}, [r1], r4 + vext.8 d19, d21, d21, #1 + vadd.u8 d2, d2, d6 + vhadd.u8 d3, d2, d19 + vst1.32 {d2[0]}, [r1], r4 + vadd.u8 d3, d3, d7 + vst1.32 {d3[0]}, [r1], r4 + subs r12, r12, #12 + bgt 1b + + pop {r4,pc} +endfunc + +.macro paeth rx, ra, rb, rc + vaddl.u8 q12, \ra, \rb @ a + b + vaddl.u8 q15, \rc, \rc @ 2*c + vabdl.u8 q13, \rb, \rc @ pa + vabdl.u8 q14, \ra, \rc @ pb + vabd.u16 q15, q12, q15 @ pc + vcle.u16 q12, q13, q14 @ pa <= pb + vcle.u16 q13, q13, q15 @ pa <= pc + vcle.u16 q14, q14, q15 @ pb <= pc + vand q12, q12, q13 @ pa <= pb && pa <= pc + vmovn.u16 d28, q14 + vmovn.u16 \rx, q12 + vbsl d28, \rb, \rc + vbsl \rx, \ra, d28 +.endm + +func png_read_filter_row_paeth4_neon, export=1 + ldr r12, [r0, #4] @ rowbytes + vmov.i8 d3, #0 + vmov.i8 d20, #0 +1: + vld4.32 {d4[],d5[],d6[],d7[]}, [r1,:128] + vld4.32 {d16[],d17[],d18[],d19[]},[r2,:128]! + paeth d0, d3, d16, d20 + vadd.u8 d0, d0, d4 + paeth d1, d0, d17, d16 + vadd.u8 d1, d1, d5 + paeth d2, d1, d18, d17 + vadd.u8 d2, d2, d6 + paeth d3, d2, d19, d18 + vmov d20, d19 + vadd.u8 d3, d3, d7 + vst4.32 {d0[0],d1[0],d2[0],d3[0]},[r1,:128]! + subs r12, r12, #16 + bgt 1b + + bx lr +endfunc + +func png_read_filter_row_paeth3_neon, export=1 + push {r4,lr} + ldr r12, [r0, #4] @ rowbytes + vmov.i8 d3, #0 + vmov.i8 d4, #0 + mov r0, r1 + mov r4, #3 + mov lr, #12 + vld1.8 {q11}, [r0], lr +1: + vld1.8 {q10}, [r2], lr + paeth d0, d3, d20, d4 + vext.8 d5, d22, d23, #3 + vadd.u8 d0, d0, d22 + vext.8 d17, d20, d21, #3 + paeth d1, d0, d17, d20 + vst1.32 {d0[0]}, [r1,:32], r4 + vext.8 d6, d22, d23, #6 + vadd.u8 d1, d1, d5 + vext.8 d18, d20, d21, #6 + paeth d2, d1, d18, d17 + vext.8 d7, d23, d23, #1 + vld1.8 {q11}, [r0], lr + vst1.32 {d1[0]}, [r1], r4 + vadd.u8 d2, d2, d6 + vext.8 d19, d21, d21, #1 + paeth d3, d2, d19, d18 + vst1.32 {d2[0]}, [r1], r4 + vmov d4, d19 + vadd.u8 d3, d3, d7 + vst1.32 {d3[0]}, [r1], r4 + subs r12, r12, #12 + bgt 1b + + pop {r4,pc} +endfunc +#endif /* FILTER_OPTIMIZATIONS && __arm__ && __ARM_NEON__ */ diff --git a/src/SDL2/external/libpng-1.6.2/autogen.sh b/src/SDL2/external/libpng-1.6.2/autogen.sh new file mode 100755 index 000000000..decf0f56f --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/autogen.sh @@ -0,0 +1,219 @@ +#! /bin/sh +# +# Run 'autoreconf' to build 'configure', 'Makefile.in' and other configure +# control files. +# +# The first time this is run on a GIT checkout the only files that exist are +# configure.ac and Makefile.am; all of the autotools support scripts are +# missing. They are instantiated with autoreconf --force --install. +# +# For regular ("tarball") distributions all the files should exist. We do not +# want them to be updated *under any circumstances*. It should never be +# necessary to rune autogen.sh because ./configure --enable-maintainer-mode says +# what to do if Makeile.am or configure.ac are changed. +# +# It is *probably* OK to update the files on a GIT checkout, because they have +# come from the local tools, but leave that to the user who is assumed to know +# whether it is ok or required. +# +# This script is intended to work without arguments, there are, however, hidden +# arguments for (a) use while testing the script and (b) to fix up systems that +# have been broken. If (b) is required the script prompts for the correct +# options. For this reason the options are *NOT* documented in the help; this +# is deliberate; UTSL. +# +clean= +maintainer= +while test $# -gt 0 +do + case "$1" in + --maintainer) + maintainer=1;; + + --clean) + clean=1;; + + *) + exec >&2 + echo "$0: usage: ./autogen.sh" + if test -d .git + then + echo " ./autogen.sh generates the configure script and" + echo " Makefile.in, or refreshes them after changes to Makefile.am" + echo " or configure.ac. You may prefer to just run autoreconf." + elif test -z "$maintainer" + then + echo " DO NOT RUN THIS SCRIPT." + echo " If you need to change Makefile.am or configure.ac then you" + echo " also need to run ./configure --enable-maintainer-mode and" + echo " use the appropriate autotools, *NOT* this script, to update" + echo " everything, please check the documentation of autoreconf." + echo " WARNING: libpng is intentionally generated with a known," + echo " fixed, set of autotools. It is known *NOT* to work with" + echo " the collection of autotools distributed on highly reputable" + echo " operating systems." + echo " Remember: autotools is GNU software, you are expected to" + echo " pay for support." + else + echo " You have run autogen.sh with --maintainer enabled and you" + echo " are not using a GIT distribution, then you have given an" + echo " unrecognized argument. This is not good. --maintainer" + echo " switches off any assumptions that you might not know what" + echo " you are doing." + fi + exit 1;; + esac + + shift +done +# +# First check for a set of the autotools files; if absent then this is assumed +# to be a GIT version and the local autotools must be used. If present this +# is a tarball distribution and the script should not be used. If partially +# present bad things are happening. +# +# The autotools generated files: +libpng_autotools_files="Makefile.in aclocal.m4 config.guess config.h.in\ + config.sub configure depcomp install-sh ltmain.sh missing test-driver" +# +# These are separate because 'maintainer-clean' does not remove them. +libpng_libtool_files="scripts/libtool.m4 scripts/ltoptions.m4\ + scripts/ltsugar.m4 scripts/ltversion.m4 scripts/lt~obsolete.m4" + +libpng_autotools_dirs="autom4te.cache" # not required +# +# The configure generated files: +libpng_configure_files="Makefile config.h config.log config.status\ + libpng-config libpng.pc libtool stamp-h1" + +libpng_configure_dirs=".deps" +# +# We must remove the configure generated files as well as the autotools +# generated files if autotools are regenerated because otherwise if configure +# has been run without "--enable-maintainer-mode" make can do a partial update +# of Makefile. These functions do the two bits of cleaning. +clean_autotools(){ + rm -rf $libpng_autotools_files $libpng_libtool_files $libpng_autotools_dirs +} + +clean_configure(){ + rm -rf $libpng_configure_files $libpng_configure_dirs +} +# +# Clean: remove everything (this is to help with testing) +if test -n "$clean" +then + clean_configure + if test -n "$maintainer" + then + clean_autotools + fi + + exit 0 +fi +# +# Validate the distribution. +libpng_autotools_file_found= +libpng_autotools_file_missing= +for file in $libpng_autotools_files +do + if test -f "$file" + then + libpng_autotools_file_found=1 + else + libpng_autotools_file_missing=1 + fi +done +# +# Presence of one of these does not *invalidate* missing, but absence +# invalidates found. +for file in $libpng_libtool_files +do + if test ! -f "$file" + then + libpng_autotools_file_missing=1 + fi +done +# +# The cache directory doesn't matter - it will be regenerated and does not exist +# anyway in a tarball. +# +# Either everything is missing or everything is there, the --maintainer option +# just changes this so that the mode is set to generate all the files. +mode= +if test -z "$libpng_autotools_file_found" -o -n "$maintainer" +then + mode="autoreconf" +else + if test -n "$libpng_autotools_file_missing" + then + mode="broken" + else + mode="configure" + fi +fi +# +# So: +case "$mode" in + autoreconf) + # Clean in case configure files exist + clean_configure + clean_autotools + # Everything must be initialized, so use --force + if autoreconf --warnings=all --force --install + then + missing= + for file in $libpng_autotools_files + do + test -f "$file" || missing=1 + done + # ignore the cache directory + test -z "$missing" || { + exec >&2 + echo "autoreconf was run, but did not produce all the expected" + echo "files. It is likely that your autotools installation is" + echo "not compatible with that expected by libpng." + exit 1 + } + else + exec >&2 + echo "autoreconf failed: your version of autotools is incompatible" + echo "with this libpng version. Please use a distributed archive" + echo "(which includes the autotools generated files) and run configure" + echo "instead." + exit 1 + fi;; + + configure) + if test -d .git + then + exec >&2 + echo "ERROR: running autoreconf on an initialized sytem" + echo " This is not necessary; it is only necessary to remake the" + echo " autotools generated files if Makefile.am or configure.ac" + echo " change and make does the right thing with:" + echo + echo " ./configure --enable-maintainer-mode." + echo + echo " You can run autoreconf yourself if you don't like maintainer" + echo " mode and you can also just run autoreconf -f -i to initialize" + echo " everything in the first place; this script is only for" + echo " compatiblity with prior releases." + exit 1 + else + exec >&2 + echo "autogen.sh is intended only to generate 'configure' on systems" + echo "that do not have it. You have a complete 'configure', if you" + echo "need to change Makefile.am or configure.ac you also need to" + echo "run configure with the --enable-maintainer-mode option." + exit 1 + fi;; + + broken) + exec >&2 + echo "Your system has a partial set of autotools generated files." + echo "autogen.sh is unable to proceed. The full set of files is" + echo "contained in the libpng 'tar' distribution archive and you do" + echo "not need to run autogen.sh if you use it." + exit 1;; +esac diff --git a/src/SDL2/external/libpng-1.6.2/config.guess b/src/SDL2/external/libpng-1.6.2/config.guess new file mode 100755 index 000000000..872b96a16 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/config.guess @@ -0,0 +1,1537 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. + +timestamp='2012-09-25' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner. Please send patches (context +# diff format) to and include a ChangeLog +# entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm*:riscos:*:*|arm*:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW64*:*) + echo ${UNAME_MACHINE}-pc-mingw64 + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + x86_64:Haiku:*:*) + echo x86_64-unknown-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-*:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; +esac + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/src/SDL2/external/libpng-1.6.2/config.h.in b/src/SDL2/external/libpng-1.6.2/config.h.in new file mode 100644 index 000000000..713869b39 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/config.h.in @@ -0,0 +1,112 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the `feenableexcept' function. */ +#undef HAVE_FEENABLEEXCEPT + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + +/* Define to 1 if you have the `z' library (-lz). */ +#undef HAVE_LIBZ + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the `memset' function. */ +#undef HAVE_MEMSET + +/* Define to 1 if you have the `pow' function. */ +#undef HAVE_POW + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Turn on ARM Neon optimizations at run-time */ +#undef PNG_ARM_NEON_API_SUPPORTED + +/* Check for ARM Neon support at run-time */ +#undef PNG_ARM_NEON_CHECK_SUPPORTED + +/* Enable ARM Neon optimizations */ +#undef PNG_ARM_NEON_SUPPORTED + +/* Disable ARM Neon optimizations */ +#undef PNG_NO_ARM_NEON + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define to 1 if your declares `struct tm'. */ +#undef TM_IN_SYS_TIME + +/* Version number of package */ +#undef VERSION + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to the equivalent of the C99 'restrict' keyword, or to + nothing if this is not supported. Do not define if restrict is + supported directly. */ +#undef restrict +/* Work around a bug in Sun C++: it does not support _Restrict or + __restrict__, even though the corresponding Sun C compiler ends up with + "#define restrict _Restrict" or "#define restrict __restrict__" in the + previous line. Perhaps some future version of Sun C++ will work with + restrict; if so, hopefully it defines __RESTRICT like Sun C does. */ +#if defined __SUNPRO_CC && !defined __RESTRICT +# define _Restrict +# define __restrict__ +#endif + +/* Define to `unsigned int' if does not define. */ +#undef size_t diff --git a/src/SDL2/external/libpng-1.6.2/config.sub b/src/SDL2/external/libpng-1.6.2/config.sub new file mode 100755 index 000000000..8df551109 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/config.sub @@ -0,0 +1,1793 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. + +timestamp='2012-12-06' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted GNU ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + android-linux) + os=-linux-android + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze*) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*178) + os=-lynxos178 + ;; + -lynx*5) + os=-lynxos5 + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | aarch64 | aarch64_be \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc \ + | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ + | avr | avr32 \ + | be32 | be64 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | epiphany \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | le32 | le64 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 \ + | ns16k | ns32k \ + | open8 \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pyramid \ + | rl78 | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | we32k \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip) + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | aarch64-* | aarch64_be-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | be32-* | be64-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | le32-* | le64-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | microblaze-* | microblazeel-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pyramid-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile*-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze*) + basic_machine=microblaze-xilinx + ;; + mingw64) + basic_machine=x86_64-pc + os=-mingw64 + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + msys) + basic_machine=i386-pc + os=-msys + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos | rdos64) + basic_machine=x86_64-pc + os=-rdos + ;; + rdos32) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tile*) + basic_machine=$basic_machine-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -bitrig* | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-musl* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + hexagon-*) + os=-elf + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/src/SDL2/external/libpng-1.6.2/configure b/src/SDL2/external/libpng-1.6.2/configure new file mode 100755 index 000000000..8964b560d --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/configure @@ -0,0 +1,15176 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for libpng 1.6.2. +# +# Report bugs to . +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: png-mng-implement@lists.sourceforge.net about your +$0: system, including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +SHELL=${CONFIG_SHELL-/bin/sh} + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='libpng' +PACKAGE_TARNAME='libpng' +PACKAGE_VERSION='1.6.2' +PACKAGE_STRING='libpng 1.6.2' +PACKAGE_BUGREPORT='png-mng-implement@lists.sourceforge.net' +PACKAGE_URL='' + +ac_unique_file="pngget.c" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +PNG_ARM_NEON_FALSE +PNG_ARM_NEON_TRUE +AM_CCASFLAGS +DO_PNG_PREFIX_FALSE +DO_PNG_PREFIX_TRUE +PNG_PREFIX +binconfigs +pkgconfigdir +PNGLIB_RELEASE +PNGLIB_MINOR +PNGLIB_MAJOR +PNGLIB_VERSION +SYMBOL_PREFIX +HAVE_LD_VERSION_SCRIPT_FALSE +HAVE_LD_VERSION_SCRIPT_TRUE +HAVE_SOLARIS_LD_FALSE +HAVE_SOLARIS_LD_TRUE +LIBOBJS +POW_LIB +PNG_COPTS +DFNCPP +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +RANLIB +ac_ct_AR +AR +NM +ac_ct_DUMPBIN +DUMPBIN +LIBTOOL +OBJDUMP +DLLTOOL +AS +LN_S +CPP +LD +FGREP +EGREP +GREP +SED +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +am__fastdepCCAS_FALSE +am__fastdepCCAS_TRUE +CCASDEPMODE +CCASFLAGS +CCAS +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_maintainer_mode +enable_dependency_tracking +with_gnu_ld +enable_shared +enable_static +with_pic +enable_fast_install +with_sysroot +enable_libtool_lock +enable_werror +with_zlib_prefix +with_pkgconfigdir +with_binconfigs +with_libpng_prefix +enable_arm_neon +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CCAS +CCASFLAGS +CPP +PNG_COPTS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures libpng 1.6.2 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/libpng] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of libpng 1.6.2:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-maintainer-mode + enable make rules and dependencies not useful (and + sometimes confusing) to the casual installer + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --enable-werror[=OPT] Pass -Werror or the given argument to the compiler + if it is supported + --enable-arm-neon Enable ARM NEON optimizations: =off, check, api, on: + off: disable the optimizations; check: use internal + checking code (deprecated and poorly supported); + api: disable by default, enable by a call to + png_set_option; on: turn on unconditionally. The + default is 'on' if __ARM_NEON__ is defined, + otherwise 'off'. + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --with-sysroot=DIR Search for dependent libraries within DIR + (or the compiler's sysroot if not specified). + --with-zlib-prefix prefix that may have been used in installed zlib + --with-pkgconfigdir Use the specified pkgconfig dir (default is + libdir/pkgconfig) + --with-binconfigs Generate shell libpng-config scripts as well as + pkg-config data [default=yes] + --with-libpng-prefix prefix libpng exported function (API) names with the + given value + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CCAS assembler compiler command (defaults to CC) + CCASFLAGS assembler compiler flags (defaults to CFLAGS) + CPP C preprocessor + PNG_COPTS additional flags for the C compiler, use this for options that + would cause configure itself to fail + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +libpng configure 1.6.2 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_type +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libpng $as_me 1.6.2, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + +# libpng does not follow GNU file name conventions (hence 'foreign') +# color-tests requires automake 1.11 or later +# silent-rules requires automake 1.11 or later +# dist-xz requires automake 1.11 or later +# 1.12.2 fixes a security issue in 1.11.2 and 1.12.1 +# 1.13 is required for parallel tests +am__api_version='1.13' + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='libpng' + VERSION='1.6.2' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + +# The following line causes --disable-maintainer-mode to be the default to +# configure, this is necessary because libpng distributions cannot rely on the +# time stamps of the autotools generated files being correct + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then : + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + + +PNGLIB_VERSION=1.6.2 +PNGLIB_MAJOR=1 +PNGLIB_MINOR=6 +PNGLIB_RELEASE=2 + + + +ac_config_headers="$ac_config_headers config.h" + + +# Checks for programs. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +# By default we simply use the C compiler to build assembly code. + +test "${CCAS+set}" = set || CCAS=$CC +test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS + + + +depcc="$CCAS" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CCAS_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CCAS_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CCAS_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CCAS_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; } +CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then + am__fastdepCCAS_TRUE= + am__fastdepCCAS_FALSE='#' +else + am__fastdepCCAS_TRUE='#' + am__fastdepCCAS_FALSE= +fi + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case "$ECHO" in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.4.2' +macro_revision='1.3337' + + + + + + + + + + + + + +ltmain="$ac_aux_dir/ltmain.sh" + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } + + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test "$GCC" != yes; then + reload_cmds=false + fi + ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} +: ${AR_FLAGS=cru} + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no +fi + + +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 +$as_echo "${with_sysroot}" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } + + + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi + +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + + + +# Set options +enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AS="${ac_tool_prefix}as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 +$as_echo "$AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AS="as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 +$as_echo "$ac_ct_AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + + ;; +esac + +test -z "$AS" && AS=as + + + + + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + enable_dlopen=no + + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + pic_mode=default +fi + + +test -z "$pic_mode" && pic_mode=default + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='${wl}--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test x"$lt_cv_prog_compiler__b" = xyes; then + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test "$lt_cv_irix_exported_symbol" = yes; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([A-Za-z]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report which library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + + +# Some awks crash when confronted with pnglibconf.dfa, do a test run now +# to make sure this doesn't happen +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that AWK works" >&5 +$as_echo_n "checking that AWK works... " >&6; } +if ${AWK} -f ${srcdir}/scripts/options.awk out="/dev/null" version=search\ + ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\ + ${srcdir}/pngusr.dfa 1>&2 +then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 1 "failed +See \`config.log' for more details" "$LINENO" 5; } +fi + +# This is a remnant of the old cc -E validation, where it may have been +# necessary to use a different preprocessor for .dfn files +DFNCPP="$CPP" + + +# -Werror cannot be passed to GCC in CFLAGS because configure will fail (it +# checks the compiler with a program that generates a warning), add the +# following option to deal with this + +# Check whether --enable-werror was given. +if test "${enable_werror+set}" = set; then : + enableval=$enable_werror; test "$enable_werror" = "yes" && enable_werror="-Werror" + if test "$enable_werror" != "no"; then + sav_CFLAGS="$CFLAGS" + CFLAGS="$enable_werror $CFLAGS" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the compiler allows $enable_werror" >&5 +$as_echo_n "checking if the compiler allows $enable_werror... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + int main(int argc, char **argv){ + return argv[argc-1][0]; + } +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + PNG_COPTS="$PNG_COPTS $enable_werror" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS="$sav_CFLAGS" + fi +fi + + +# Checks for header files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + + +# Checks for typedefs, structures, and compiler characteristics. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if ${ac_cv_c_const+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + +#ifndef __cplusplus + /* Ultrix mips cc rejects this sort of thing. */ + typedef int charset[2]; + const charset cs = { 0, 0 }; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this sort of thing. */ + char tx; + char *t = &tx; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; } bx; + struct s *b = &bx; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes +else + ac_cv_c_const=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +$as_echo "#define const /**/" >>confdefs.h + +fi + +ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" +if test "x$ac_cv_type_size_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define size_t unsigned int +_ACEOF + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 +$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } +if ${ac_cv_struct_tm+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include + +int +main () +{ +struct tm tm; + int *p = &tm.tm_sec; + return !p; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_struct_tm=time.h +else + ac_cv_struct_tm=sys/time.h +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 +$as_echo "$ac_cv_struct_tm" >&6; } +if test $ac_cv_struct_tm = sys/time.h; then + +$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C/C++ restrict keyword" >&5 +$as_echo_n "checking for C/C++ restrict keyword... " >&6; } +if ${ac_cv_c_restrict+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_c_restrict=no + # The order here caters to the fact that C++ does not require restrict. + for ac_kw in __restrict __restrict__ _Restrict restrict; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +typedef int * int_ptr; + int foo (int_ptr $ac_kw ip) { + return ip[0]; + } +int +main () +{ +int s[1]; + int * $ac_kw t = s; + t[0] = 0; + return foo(t) + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_restrict=$ac_kw +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test "$ac_cv_c_restrict" != no && break + done + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_restrict" >&5 +$as_echo "$ac_cv_c_restrict" >&6; } + + case $ac_cv_c_restrict in + restrict) ;; + no) $as_echo "#define restrict /**/" >>confdefs.h + ;; + *) cat >>confdefs.h <<_ACEOF +#define restrict $ac_cv_c_restrict +_ACEOF + ;; + esac + + +# Checks for library functions. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strtod" >&5 +$as_echo_n "checking for working strtod... " >&6; } +if ${ac_cv_func_strtod+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_strtod=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +$ac_includes_default +#ifndef strtod +double strtod (); +#endif +int +main() +{ + { + /* Some versions of Linux strtod mis-parse strings with leading '+'. */ + char *string = " +69"; + char *term; + double value; + value = strtod (string, &term); + if (value != 69 || term != (string + 4)) + return 1; + } + + { + /* Under Solaris 2.4, strtod returns the wrong value for the + terminating character under some conditions. */ + char *string = "NaN"; + char *term; + strtod (string, &term); + if (term != string && *(term - 1) == 0) + return 1; + } + return 0; +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_strtod=yes +else + ac_cv_func_strtod=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strtod" >&5 +$as_echo "$ac_cv_func_strtod" >&6; } +if test $ac_cv_func_strtod = no; then + case " $LIBOBJS " in + *" strtod.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS strtod.$ac_objext" + ;; +esac + +ac_fn_c_check_func "$LINENO" "pow" "ac_cv_func_pow" +if test "x$ac_cv_func_pow" = xyes; then : + +fi + +if test $ac_cv_func_pow = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pow in -lm" >&5 +$as_echo_n "checking for pow in -lm... " >&6; } +if ${ac_cv_lib_m_pow+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pow (); +int +main () +{ +return pow (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_pow=yes +else + ac_cv_lib_m_pow=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_pow" >&5 +$as_echo "$ac_cv_lib_m_pow" >&6; } +if test "x$ac_cv_lib_m_pow" = xyes; then : + POW_LIB=-lm +else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot find library containing definition of pow" >&5 +$as_echo "$as_me: WARNING: cannot find library containing definition of pow" >&2;} +fi + +fi + +fi + +for ac_func in memset +do : + ac_fn_c_check_func "$LINENO" "memset" "ac_cv_func_memset" +if test "x$ac_cv_func_memset" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_MEMSET 1 +_ACEOF + +else + as_fn_error $? "memset not found in libc" "$LINENO" 5 +fi +done + +for ac_func in pow +do : + ac_fn_c_check_func "$LINENO" "pow" "ac_cv_func_pow" +if test "x$ac_cv_func_pow" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_POW 1 +_ACEOF + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pow in -lm" >&5 +$as_echo_n "checking for pow in -lm... " >&6; } +if ${ac_cv_lib_m_pow+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pow (); +int +main () +{ +return pow (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_pow=yes +else + ac_cv_lib_m_pow=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_pow" >&5 +$as_echo "$ac_cv_lib_m_pow" >&6; } +if test "x$ac_cv_lib_m_pow" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +else + as_fn_error $? "cannot find pow" "$LINENO" 5 +fi + +fi +done + + +# Check whether --with-zlib-prefix was given. +if test "${with_zlib_prefix+set}" = set; then : + withval=$with_zlib_prefix; ZPREFIX=${withval} +else + ZPREFIX='z_' +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for zlibVersion in -lz" >&5 +$as_echo_n "checking for zlibVersion in -lz... " >&6; } +if ${ac_cv_lib_z_zlibVersion+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lz $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char zlibVersion (); +int +main () +{ +return zlibVersion (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_z_zlibVersion=yes +else + ac_cv_lib_z_zlibVersion=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_zlibVersion" >&5 +$as_echo "$ac_cv_lib_z_zlibVersion" >&6; } +if test "x$ac_cv_lib_z_zlibVersion" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBZ 1 +_ACEOF + + LIBS="-lz $LIBS" + +else + as_ac_Lib=`$as_echo "ac_cv_lib_z_${ZPREFIX}zlibVersion" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ZPREFIX}zlibVersion in -lz" >&5 +$as_echo_n "checking for ${ZPREFIX}zlibVersion in -lz... " >&6; } +if eval \${$as_ac_Lib+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lz $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char ${ZPREFIX}zlibVersion (); +int +main () +{ +return ${ZPREFIX}zlibVersion (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$as_ac_Lib=yes" +else + eval "$as_ac_Lib=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +eval ac_res=\$$as_ac_Lib + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBZ 1 +_ACEOF + + LIBS="-lz $LIBS" + +else + as_fn_error $? "zlib not installed" "$LINENO" 5 +fi + +fi + + +# The following is for pngvalid, to ensure it catches FP errors even on +# platforms that don't enable FP exceptions, the function appears in the math +# library (typically), it's not an error if it is not found. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for feenableexcept in -lm" >&5 +$as_echo_n "checking for feenableexcept in -lm... " >&6; } +if ${ac_cv_lib_m_feenableexcept+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char feenableexcept (); +int +main () +{ +return feenableexcept (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_feenableexcept=yes +else + ac_cv_lib_m_feenableexcept=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_feenableexcept" >&5 +$as_echo "$ac_cv_lib_m_feenableexcept" >&6; } +if test "x$ac_cv_lib_m_feenableexcept" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi + +for ac_func in feenableexcept +do : + ac_fn_c_check_func "$LINENO" "feenableexcept" "ac_cv_func_feenableexcept" +if test "x$ac_cv_func_feenableexcept" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_FEENABLEEXCEPT 1 +_ACEOF + +fi +done + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if using Solaris linker" >&5 +$as_echo_n "checking if using Solaris linker... " >&6; } +SLD=`$LD --version 2>&1 | grep Solaris` +if test "$SLD"; then + have_solaris_ld=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + have_solaris_ld=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + if test "$have_solaris_ld" = "yes"; then + HAVE_SOLARIS_LD_TRUE= + HAVE_SOLARIS_LD_FALSE='#' +else + HAVE_SOLARIS_LD_TRUE='#' + HAVE_SOLARIS_LD_FALSE= +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libraries can be versioned" >&5 +$as_echo_n "checking if libraries can be versioned... " >&6; } +# Special case for PE/COFF platforms: ld reports +# support for version-script, but doesn't actually +# DO anything with it. +case $host in +*cygwin* | *mingw32* | *interix* ) + have_ld_version_script=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +;; +* ) + +if test "$have_solaris_ld" = "yes"; then + GLD=`$LD --help < /dev/null 2>&1 | grep 'M mapfile'` +else + GLD=`$LD --help < /dev/null 2>/dev/null | grep version-script` +fi + +if test "$GLD"; then + have_ld_version_script=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + have_ld_version_script=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** You have not enabled versioned symbols." >&5 +$as_echo "$as_me: WARNING: *** You have not enabled versioned symbols." >&2;} +fi +;; +esac + + if test "$have_ld_version_script" = "yes"; then + HAVE_LD_VERSION_SCRIPT_TRUE= + HAVE_LD_VERSION_SCRIPT_FALSE='#' +else + HAVE_LD_VERSION_SCRIPT_TRUE='#' + HAVE_LD_VERSION_SCRIPT_FALSE= +fi + + +if test "$have_ld_version_script" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for symbol prefix" >&5 +$as_echo_n "checking for symbol prefix... " >&6; } + SYMBOL_PREFIX=`echo "PREFIX=__USER_LABEL_PREFIX__" \ + | ${CPP-${CC-gcc} -E} - 2>&1 \ + | ${EGREP-grep} "^PREFIX=" \ + | ${SED-sed} -e "s:^PREFIX=::" -e "s:__USER_LABEL_PREFIX__::"` + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SYMBOL_PREFIX" >&5 +$as_echo "$SYMBOL_PREFIX" >&6; } +fi + +# Substitutions for .in files + + + + + +# Additional arguments (and substitutions) +# Allow the pkg-config directory to be set + +# Check whether --with-pkgconfigdir was given. +if test "${with_pkgconfigdir+set}" = set; then : + withval=$with_pkgconfigdir; pkgconfigdir=${withval} +else + pkgconfigdir='${libdir}/pkgconfig' +fi + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: pkgconfig directory is ${pkgconfigdir}" >&5 +$as_echo "$as_me: pkgconfig directory is ${pkgconfigdir}" >&6;} + +# Make the *-config binary config scripts optional + +# Check whether --with-binconfigs was given. +if test "${with_binconfigs+set}" = set; then : + withval=$with_binconfigs; if test "${withval}" = no; then + binconfigs= + { $as_echo "$as_me:${as_lineno-$LINENO}: libpng-config scripts will not be built" >&5 +$as_echo "$as_me: libpng-config scripts will not be built" >&6;} + else + binconfigs='${binconfigs}' + fi +else + binconfigs='${binconfigs}' +fi + + + +# Support for prefixes to the API function names; this will generate defines +# at the start of the build to rename exported library functions + +# Check whether --with-libpng-prefix was given. +if test "${with_libpng_prefix+set}" = set; then : + withval=$with_libpng_prefix; if test "${withval:-no}" != "no"; then + PNG_PREFIX=${withval} + + fi +fi + + if test "${with_libpng_prefix:-no}" != "no"; then + DO_PNG_PREFIX_TRUE= + DO_PNG_PREFIX_FALSE='#' +else + DO_PNG_PREFIX_TRUE='#' + DO_PNG_PREFIX_FALSE= +fi + + +# Because GCC by default assembles code with an executable stack, even though it +# compiles C code with a non-executable stack, it is necessary to do a fixup +# here (this may by GCC specific) +AM_CCASFLAGS=-Wa,--noexecstack + + +# Check whether --enable-arm-neon was given. +if test "${enable_arm_neon+set}" = set; then : + enableval=$enable_arm_neon; case "$enableval" in + off) + +$as_echo "#define PNG_NO_ARM_NEON /**/" >>confdefs.h +;; + check) + +$as_echo "#define PNG_ARM_NEON_CHECK_SUPPORTED /**/" >>confdefs.h +;; + api) + +$as_echo "#define PNG_ARM_NEON_API_SUPPORTED /**/" >>confdefs.h +;; + on) + +$as_echo "#define PNG_ARM_NEON_SUPPORTED /**/" >>confdefs.h +;; + *) + as_fn_error $? "arm-neon: option value required (off/check/api/on)" "$LINENO" 5;; + esac +fi + + if test "${enable_arm_neon:-no}" != "no"; then + PNG_ARM_NEON_TRUE= + PNG_ARM_NEON_FALSE='#' +else + PNG_ARM_NEON_TRUE='#' + PNG_ARM_NEON_FALSE= +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: Extra options for compiler: $PNG_COPTS" >&5 +$as_echo "$as_me: Extra options for compiler: $PNG_COPTS" >&6;} + +# Config files, substituting as above +ac_config_files="$ac_config_files Makefile libpng.pc:libpng.pc.in" + +ac_config_files="$ac_config_files libpng-config:libpng-config.in" + + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCCAS\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_SOLARIS_LD_TRUE}" && test -z "${HAVE_SOLARIS_LD_FALSE}"; then + as_fn_error $? "conditional \"HAVE_SOLARIS_LD\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LD_VERSION_SCRIPT_TRUE}" && test -z "${HAVE_LD_VERSION_SCRIPT_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LD_VERSION_SCRIPT\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DO_PNG_PREFIX_TRUE}" && test -z "${DO_PNG_PREFIX_FALSE}"; then + as_fn_error $? "conditional \"DO_PNG_PREFIX\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${PNG_ARM_NEON_TRUE}" && test -z "${PNG_ARM_NEON_FALSE}"; then + as_fn_error $? "conditional \"PNG_ARM_NEON\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by libpng $as_me 1.6.2, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +libpng config.status 1.6.2 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' +lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' +want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' +sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' +lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in SED \ +GREP \ +EGREP \ +FGREP \ +SHELL \ +ECHO \ +LD \ +AS \ +DLLTOOL \ +OBJDUMP \ +PATH_SEPARATOR \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +deplibs_check_method \ +file_magic_cmd \ +file_magic_glob \ +want_nocaseglob \ +sharedlib_from_linklib_cmd \ +AR \ +AR_FLAGS \ +archiver_list_spec \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +nm_file_list_spec \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_pic \ +lt_prog_compiler_wl \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +MANIFEST_TOOL \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_separator \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' + + + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "libpng.pc") CONFIG_FILES="$CONFIG_FILES libpng.pc:libpng.pc.in" ;; + "libpng-config") CONFIG_FILES="$CONFIG_FILES libpng-config:libpng-config.in" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) + + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="" + +# ### BEGIN LIBTOOL CONFIG + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that protects backslashes. +ECHO=$lt_ECHO + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Assembler program. +AS=$lt_AS + +# DLL creation program. +DLLTOOL=$lt_DLLTOOL + +# Object dumper program. +OBJDUMP=$lt_OBJDUMP + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The PATH separator for the build system. +PATH_SEPARATOR=$lt_PATH_SEPARATOR + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# convert \$build file names to \$host format. +to_host_file_cmd=$lt_cv_to_host_file_cmd + +# convert \$build files to toolchain format. +to_tool_file_cmd=$lt_cv_to_tool_file_cmd + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method = "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# How to find potential files when deplibs_check_method = "file_magic". +file_magic_glob=$lt_file_magic_glob + +# Find potential files using nocaseglob when deplibs_check_method = "file_magic". +want_nocaseglob=$lt_want_nocaseglob + +# Command to associate shared and link libraries. +sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd + +# The archiver. +AR=$lt_AR + +# Flags to create an archive. +AR_FLAGS=$lt_AR_FLAGS + +# How to feed a file listing to the archiver. +archiver_list_spec=$lt_archiver_list_spec + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# Specify filename containing input files for \$NM. +nm_file_list_spec=$lt_nm_file_list_spec + +# The root where to search for dependent libraries,and in which our libraries should be installed. +lt_sysroot=$lt_sysroot + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Manifest tool. +MANIFEST_TOOL=$lt_MANIFEST_TOOL + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + if test x"$xsi_shell" = xyes; then + sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ +func_dirname ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_basename ()$/,/^} # func_basename /c\ +func_basename ()\ +{\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ +func_dirname_and_basename ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ +func_stripname ()\ +{\ +\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ +\ # positional parameters, so assign one to ordinary parameter first.\ +\ func_stripname_result=${3}\ +\ func_stripname_result=${func_stripname_result#"${1}"}\ +\ func_stripname_result=${func_stripname_result%"${2}"}\ +} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ +func_split_long_opt ()\ +{\ +\ func_split_long_opt_name=${1%%=*}\ +\ func_split_long_opt_arg=${1#*=}\ +} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ +func_split_short_opt ()\ +{\ +\ func_split_short_opt_arg=${1#??}\ +\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ +} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ +func_lo2o ()\ +{\ +\ case ${1} in\ +\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ +\ *) func_lo2o_result=${1} ;;\ +\ esac\ +} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_xform ()$/,/^} # func_xform /c\ +func_xform ()\ +{\ + func_xform_result=${1%.*}.lo\ +} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_arith ()$/,/^} # func_arith /c\ +func_arith ()\ +{\ + func_arith_result=$(( $* ))\ +} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_len ()$/,/^} # func_len /c\ +func_len ()\ +{\ + func_len_result=${#1}\ +} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + +fi + +if test x"$lt_shell_append" = xyes; then + sed -e '/^func_append ()$/,/^} # func_append /c\ +func_append ()\ +{\ + eval "${1}+=\\${2}"\ +} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ +func_append_quoted ()\ +{\ +\ func_quote_for_eval "${2}"\ +\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ +} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 +$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} +fi + + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + "libpng-config":F) chmod +x libpng-config ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/src/SDL2/external/libpng-1.6.2/configure.ac b/src/SDL2/external/libpng-1.6.2/configure.ac new file mode 100644 index 000000000..f9bc4f634 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/configure.ac @@ -0,0 +1,266 @@ +# configure.ac + +dnl Process this file with autoconf to produce a configure script. +dnl +dnl Minor upgrades (compatible ABI): increment the package version +dnl (third field in two places below) and set the PNGLIB_RELEASE +dnl variable. +dnl +dnl Major upgrades (incompatible ABI): increment the package major +dnl version (second field, or first if desired), set the minor +dnl to 0, set PNGLIB_MAJOR below *and* follow the instructions in +dnl Makefile.am to upgrade the package name. + +dnl This is here to prevent earlier autoconf from being used, it +dnl should not be necessary to regenerate configure if the time +dnl stamps are correct +AC_PREREQ([2.68]) + +dnl Version number stuff here: + +AC_INIT([libpng],[1.6.2],[png-mng-implement@lists.sourceforge.net]) +AC_CONFIG_MACRO_DIR([scripts]) + +# libpng does not follow GNU file name conventions (hence 'foreign') +# color-tests requires automake 1.11 or later +# silent-rules requires automake 1.11 or later +# dist-xz requires automake 1.11 or later +# 1.12.2 fixes a security issue in 1.11.2 and 1.12.1 +# 1.13 is required for parallel tests +AM_INIT_AUTOMAKE([1.13 foreign dist-xz color-tests silent-rules]) +# The following line causes --disable-maintainer-mode to be the default to +# configure, this is necessary because libpng distributions cannot rely on the +# time stamps of the autotools generated files being correct +AM_MAINTAINER_MODE + +dnl configure.ac and Makefile.am expect automake 1.11.2 or a compatible later +dnl version; aclocal.m4 will generate a failure if you use a prior version of +dnl automake, so the following is not necessary (and is not defined anyway): +dnl AM_PREREQ([1.11.2]) +dnl stop configure from automagically running automake + +PNGLIB_VERSION=1.6.2 +PNGLIB_MAJOR=1 +PNGLIB_MINOR=6 +PNGLIB_RELEASE=2 + +dnl End of version number stuff + +AC_CONFIG_SRCDIR([pngget.c]) +AC_CONFIG_HEADERS([config.h]) + +# Checks for programs. +AC_LANG([C]) +AC_PROG_CC +AM_PROG_AS +LT_PATH_LD +AC_PROG_CPP +AC_PROG_AWK +AC_PROG_INSTALL +AC_PROG_LN_S +AC_PROG_MAKE_SET + +dnl libtool/libtoolize; version 2.4.2 is the tested version, this or any +dnl compatible later version may be used +LT_INIT([win32-dll]) +LT_PREREQ([2.4.2]) + +# Some awks crash when confronted with pnglibconf.dfa, do a test run now +# to make sure this doesn't happen +AC_MSG_CHECKING([that AWK works]) +if ${AWK} -f ${srcdir}/scripts/options.awk out="/dev/null" version=search\ + ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\ + ${srcdir}/pngusr.dfa 1>&2 +then + AC_MSG_RESULT([ok]) +else + AC_MSG_FAILURE([failed], 1) +fi + +# This is a remnant of the old cc -E validation, where it may have been +# necessary to use a different preprocessor for .dfn files +DFNCPP="$CPP" +AC_SUBST(DFNCPP) + +# -Werror cannot be passed to GCC in CFLAGS because configure will fail (it +# checks the compiler with a program that generates a warning), add the +# following option to deal with this +AC_ARG_VAR(PNG_COPTS, + [additional flags for the C compiler, use this for options that would] + [cause configure itself to fail]) +AC_ARG_ENABLE(werror, + AS_HELP_STRING([[[--enable-werror[=OPT]]]], + [Pass -Werror or the given argument to the compiler if it is supported]), + [test "$enable_werror" = "yes" && enable_werror="-Werror" + if test "$enable_werror" != "no"; then + sav_CFLAGS="$CFLAGS" + CFLAGS="$enable_werror $CFLAGS" + AC_MSG_CHECKING([if the compiler allows $enable_werror]) + AC_COMPILE_IFELSE( + [AC_LANG_SOURCE([ + [int main(int argc, char **argv){] + [return argv[argc-1][0];] + [}]])], + AC_MSG_RESULT(yes) + PNG_COPTS="$PNG_COPTS $enable_werror", + AC_MSG_RESULT(no)) + CFLAGS="$sav_CFLAGS" + fi],) + +# Checks for header files. +AC_HEADER_STDC + +# Checks for typedefs, structures, and compiler characteristics. +AC_C_CONST +AC_TYPE_SIZE_T +AC_STRUCT_TM +AC_C_RESTRICT + +# Checks for library functions. +AC_FUNC_STRTOD +AC_CHECK_FUNCS([memset], , AC_MSG_ERROR(memset not found in libc)) +AC_CHECK_FUNCS([pow], , AC_CHECK_LIB(m, pow, , AC_MSG_ERROR(cannot find pow)) ) +AC_ARG_WITH(zlib-prefix, + AS_HELP_STRING([[[--with-zlib-prefix]]], + [prefix that may have been used in installed zlib]), + [ZPREFIX=${withval}], + [ZPREFIX='z_']) +AC_CHECK_LIB(z, zlibVersion, , + AC_CHECK_LIB(z, ${ZPREFIX}zlibVersion, , AC_MSG_ERROR(zlib not installed))) + +# The following is for pngvalid, to ensure it catches FP errors even on +# platforms that don't enable FP exceptions, the function appears in the math +# library (typically), it's not an error if it is not found. +AC_CHECK_LIB([m], [feenableexcept]) +AC_CHECK_FUNCS([feenableexcept]) + +AC_MSG_CHECKING([if using Solaris linker]) +SLD=`$LD --version 2>&1 | grep Solaris` +if test "$SLD"; then + have_solaris_ld=yes + AC_MSG_RESULT(yes) +else + have_solaris_ld=no + AC_MSG_RESULT(no) +fi +AM_CONDITIONAL(HAVE_SOLARIS_LD, test "$have_solaris_ld" = "yes") + +AC_MSG_CHECKING([if libraries can be versioned]) +# Special case for PE/COFF platforms: ld reports +# support for version-script, but doesn't actually +# DO anything with it. +case $host in +*cygwin* | *mingw32* | *interix* ) + have_ld_version_script=no + AC_MSG_RESULT(no) +;; +* ) + +if test "$have_solaris_ld" = "yes"; then + GLD=`$LD --help < /dev/null 2>&1 | grep 'M mapfile'` +else + GLD=`$LD --help < /dev/null 2>/dev/null | grep version-script` +fi + +if test "$GLD"; then + have_ld_version_script=yes + AC_MSG_RESULT(yes) +else + have_ld_version_script=no + AC_MSG_RESULT(no) + AC_MSG_WARN(*** You have not enabled versioned symbols.) +fi +;; +esac + +AM_CONDITIONAL(HAVE_LD_VERSION_SCRIPT, test "$have_ld_version_script" = "yes") + +if test "$have_ld_version_script" = "yes"; then + AC_MSG_CHECKING([for symbol prefix]) + SYMBOL_PREFIX=`echo "PREFIX=__USER_LABEL_PREFIX__" \ + | ${CPP-${CC-gcc} -E} - 2>&1 \ + | ${EGREP-grep} "^PREFIX=" \ + | ${SED-sed} -e "s:^PREFIX=::" -e "s:__USER_LABEL_PREFIX__::"` + AC_SUBST(SYMBOL_PREFIX) + AC_MSG_RESULT($SYMBOL_PREFIX) +fi + +# Substitutions for .in files +AC_SUBST(PNGLIB_VERSION) +AC_SUBST(PNGLIB_MAJOR) +AC_SUBST(PNGLIB_MINOR) +AC_SUBST(PNGLIB_RELEASE) + +# Additional arguments (and substitutions) +# Allow the pkg-config directory to be set +AC_ARG_WITH(pkgconfigdir, + AS_HELP_STRING([[[--with-pkgconfigdir]]], + [Use the specified pkgconfig dir (default is libdir/pkgconfig)]), + [pkgconfigdir=${withval}], + [pkgconfigdir='${libdir}/pkgconfig']) + +AC_SUBST([pkgconfigdir]) +AC_MSG_NOTICE([[pkgconfig directory is ${pkgconfigdir}]]) + +# Make the *-config binary config scripts optional +AC_ARG_WITH(binconfigs, + AS_HELP_STRING([[[--with-binconfigs]]], + [Generate shell libpng-config scripts as well as pkg-config data] + [@<:@default=yes@:>@]), + [if test "${withval}" = no; then + binconfigs= + AC_MSG_NOTICE([[libpng-config scripts will not be built]]) + else + binconfigs='${binconfigs}' + fi], + [binconfigs='${binconfigs}']) +AC_SUBST([binconfigs]) + +# Support for prefixes to the API function names; this will generate defines +# at the start of the build to rename exported library functions +AC_ARG_WITH(libpng-prefix, + AS_HELP_STRING([[[--with-libpng-prefix]]], + [prefix libpng exported function (API) names with the given value]), + [if test "${withval:-no}" != "no"; then + AC_SUBST([PNG_PREFIX], [${withval}]) + fi]) +AM_CONDITIONAL([DO_PNG_PREFIX], [test "${with_libpng_prefix:-no}" != "no"]) + +# Because GCC by default assembles code with an executable stack, even though it +# compiles C code with a non-executable stack, it is necessary to do a fixup +# here (this may by GCC specific) +# AC_SUBST([AM_CCASFLAGS], [-Wa,--noexecstack]) + +AC_ARG_ENABLE([arm-neon], + AS_HELP_STRING([[[--enable-arm-neon]]], + [Enable ARM NEON optimizations: =off, check, api, on:] + [off: disable the optimizations; check: use internal checking code] + [(deprecated and poorly supported); api: disable by default, enable by] + [a call to png_set_option; on: turn on unconditionally. The] + [default is 'on' if __ARM_NEON__ is defined, otherwise 'off'.]), + [case "$enableval" in + off) + AC_DEFINE([PNG_NO_ARM_NEON], [], + [Disable ARM Neon optimizations]);; + check) + AC_DEFINE([PNG_ARM_NEON_CHECK_SUPPORTED], [], + [Check for ARM Neon support at run-time]);; + api) + AC_DEFINE([PNG_ARM_NEON_API_SUPPORTED], [], + [Turn on ARM Neon optimizations at run-time]);; + on) + AC_DEFINE([PNG_ARM_NEON_SUPPORTED], [], + [Enable ARM Neon optimizations]);; + *) + AC_MSG_ERROR([arm-neon: option value required (off/check/api/on)]);; + esac]) +AM_CONDITIONAL([PNG_ARM_NEON], [test "${enable_arm_neon:-no}" != "no"]) + +AC_MSG_NOTICE([[Extra options for compiler: $PNG_COPTS]]) + +# Config files, substituting as above +AC_CONFIG_FILES([Makefile libpng.pc:libpng.pc.in]) +AC_CONFIG_FILES([libpng-config:libpng-config.in], + [chmod +x libpng-config]) + +AC_OUTPUT diff --git a/src/SDL2/external/libpng-1.6.2/contrib/README.txt b/src/SDL2/external/libpng-1.6.2/contrib/README.txt new file mode 100644 index 000000000..bcd433d35 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/README.txt @@ -0,0 +1,4 @@ + +This "contrib" directory contains contributions which are not necessarily under +the libpng license, although all are open source. They are not part of +libpng proper and are not used for building the library. diff --git a/src/SDL2/external/libpng-1.6.2/contrib/examples/README.txt b/src/SDL2/external/libpng-1.6.2/contrib/examples/README.txt new file mode 100644 index 000000000..0525c9d36 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/examples/README.txt @@ -0,0 +1,24 @@ + +This directory (contrib/examples) contains examples of libpng usage. + +NO COPYRIGHT RIGHTS ARE CLAIMED TO ANY OF THE FILES IN THIS DIRECTORY. + +To the extent possible under law, the authors have waived all copyright and +related or neighboring rights to this work. This work is published from: +United States. + +The files may be used freely in any way. The intention is that appropriate +parts of the files be used in other libpng-using programs without any need for +the authors of the using code to seek copyright or license from the original +authors. + +The source code and comments in this directory are the original work of the +people named below. No other person or organization has made contributions to +the work in this directory. + +ORIGINAL AUTHORS + The following people have contributed to the code in this directory. None + of the people below claim any rights with regard to the contents of this + directory. + + John Bowler diff --git a/src/SDL2/external/libpng-1.6.2/contrib/examples/iccfrompng.c b/src/SDL2/external/libpng-1.6.2/contrib/examples/iccfrompng.c new file mode 100644 index 000000000..67676219e --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/examples/iccfrompng.c @@ -0,0 +1,180 @@ +/*- iccfrompng + * + * COPYRIGHT: Written by John Cunningham Bowler, 2011. + * To the extent possible under law, the author has waived all copyright and + * related or neighboring rights to this work. This work is published from: + * United States. + * + * Extract any icc profiles found in the given PNG files. This is a simple + * example of a program which extracts information from the header of a PNG file + * without processing the image. Notice that some header information may occur + * after the image data, textual data and comments are an example; the approach + * in this file won't work reliably for such data because it only looks for the + * information in the section of the file that preceeds the image data. + * + * Compile and link against libpng and zlib, plus anything else required on the + * system you use. + * + * To use supply a list of PNG files containing iCCP chunks, the chunks will be + * extracted to a similarly named file with the extension replaced by 'icc', + * which will be overwritten without warning. + */ +#include +#include +#include +#include + +#include + +static int verbose = 1; +static png_byte no_profile[] = "no profile"; + +static png_bytep +extract(FILE *fp, png_uint_32 *proflen) +{ + png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING,0,0,0); + png_infop info_ptr = NULL; + png_bytep result = NULL; + + /* Initialize for error or no profile: */ + *proflen = 0; + + if (png_ptr == NULL) + { + fprintf(stderr, "iccfrompng: version library mismatch?\n"); + return 0; + } + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return 0; + } + + png_init_io(png_ptr, fp); + + info_ptr = png_create_info_struct(png_ptr); + if (info_ptr == NULL) + png_error(png_ptr, "OOM allocating info structure"); + + png_read_info(png_ptr, info_ptr); + + { + png_charp name; + int compression_type; + png_bytep profile; + + if (png_get_iCCP(png_ptr, info_ptr, &name, &compression_type, &profile, + proflen) & PNG_INFO_iCCP) + { + result = malloc(*proflen); + if (result != NULL) + memcpy(result, profile, *proflen); + + else + png_error(png_ptr, "OOM allocating profile buffer"); + } + + else + result = no_profile; + } + + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return result; +} + +static int +extract_one_file(const char *filename) +{ + int result = 0; + FILE *fp = fopen(filename, "rb"); + + if (fp != NULL) + { + png_uint_32 proflen = 0; + png_bytep profile = extract(fp, &proflen); + + if (profile != NULL && profile != no_profile) + { + size_t len; + char *output; + + { + const char *ep = strrchr(filename, '.'); + + if (ep != NULL) + len = ep-filename; + + else + len = strlen(filename); + } + + output = malloc(len + 5); + if (output != NULL) + { + FILE *of; + + memcpy(output, filename, len); + strcpy(output+len, ".icc"); + + of = fopen(output, "wb"); + if (of != NULL) + { + if (fwrite(profile, proflen, 1, of) == 1 && + fflush(of) == 0 && + fclose(of) == 0) + { + if (verbose) + printf("%s -> %s\n", filename, output); + /* Success return */ + result = 1; + } + + else + { + fprintf(stderr, "%s: error writing profile\n", output); + if (remove(output)) + fprintf(stderr, "%s: could not remove file\n", output); + } + } + + else + fprintf(stderr, "%s: failed to open output file\n", output); + + free(output); + } + + else + fprintf(stderr, "%s: OOM allocating string!\n", filename); + + free(profile); + } + + else if (verbose && profile == no_profile) + printf("%s has no profile\n", filename); + } + + else + fprintf(stderr, "%s: could not open file\n", filename); + + return result; +} + +int +main(int argc, char **argv) +{ + int i; + int extracted = 0; + + for (i=1; i +#include +#include /* required for error handling */ + +/* Normally use here to get the installed libpng, but this is done to + * ensure the code picks up the local libpng implementation: + */ +#include "../../png.h" + +/* Return component 'c' of pixel 'x' from the given row. */ +static unsigned int +component(png_const_bytep row, png_uint_32 x, unsigned int c, + unsigned int bit_depth, unsigned int channels) +{ + /* PNG images can be up to 2^31 pixels wide, but this means they can be up to + * 2^37 bits wide (for a 64-bit pixel - the largest possible) and hence 2^34 + * bytes wide. Since the row fitted into memory, however, the following must + * work: + */ + png_uint_32 bit_offset_hi = bit_depth * ((x >> 6) * channels); + png_uint_32 bit_offset_lo = bit_depth * ((x & 0x3f) * channels + c); + + row = (png_const_bytep)(((PNG_CONST png_byte (*)[8])row) + bit_offset_hi); + row += bit_offset_lo >> 3; + bit_offset_lo &= 0x07; + + /* PNG pixels are packed into bytes to put the first pixel in the highest + * bits of the byte and into two bytes for 16-bit values with the high 8 bits + * first, so: + */ + switch (bit_depth) + { + case 1: return (row[0] >> (7-bit_offset_lo)) & 0x01; + case 2: return (row[0] >> (6-bit_offset_lo)) & 0x03; + case 4: return (row[0] >> (4-bit_offset_lo)) & 0x0f; + case 8: return row[0]; + case 16: return (row[0] << 8) + row[1]; + default: + /* This should never happen, it indicates a bug in this program or in + * libpng itself: + */ + fprintf(stderr, "pngpixel: invalid bit depth %u\n", bit_depth); + exit(1); + } +} + +/* Print a pixel from a row returned by libpng; determine the row format, find + * the pixel, and print the relevant information to stdout. + */ +static void +print_pixel(png_structp png_ptr, png_infop info_ptr, png_const_bytep row, + png_uint_32 x) +{ + PNG_CONST unsigned int bit_depth = png_get_bit_depth(png_ptr, info_ptr); + + switch (png_get_color_type(png_ptr, info_ptr)) + { + case PNG_COLOR_TYPE_GRAY: + printf("GRAY %u\n", component(row, x, 0, bit_depth, 1)); + return; + + /* The palette case is slightly more difficult - the palette and, if + * present, the tRNS ('transparency', though the values are really + * opacity) data must be read to give the full picture: + */ + case PNG_COLOR_TYPE_PALETTE: + { + PNG_CONST unsigned int index = component(row, x, 0, bit_depth, 1); + png_colorp palette = NULL; + int num_palette = 0; + + if ((png_get_PLTE(png_ptr, info_ptr, &palette, &num_palette) & + PNG_INFO_PLTE) && num_palette > 0 && palette != NULL) + { + png_bytep trans_alpha = NULL; + int num_trans = 0; + if ((png_get_tRNS(png_ptr, info_ptr, &trans_alpha, &num_trans, + NULL) & PNG_INFO_tRNS) && num_trans > 0 && + trans_alpha != NULL) + printf("INDEXED %u = %d %d %d %d\n", index, + palette[index].red, palette[index].green, + palette[index].blue, + index < num_trans ? trans_alpha[index] : 255); + + else /* no transparency */ + printf("INDEXED %u = %d %d %d\n", index, + palette[index].red, palette[index].green, + palette[index].blue); + } + + else + printf("INDEXED %u = invalid index\n", index); + } + return; + + case PNG_COLOR_TYPE_RGB: + printf("RGB %u %u %u\n", component(row, x, 0, bit_depth, 3), + component(row, x, 1, bit_depth, 3), + component(row, x, 2, bit_depth, 3)); + return; + + case PNG_COLOR_TYPE_GRAY_ALPHA: + printf("GRAY+ALPHA %u %u\n", component(row, x, 0, bit_depth, 2), + component(row, x, 1, bit_depth, 2)); + return; + + case PNG_COLOR_TYPE_RGB_ALPHA: + printf("RGBA %u %u %u %u\n", component(row, x, 0, bit_depth, 4), + component(row, x, 1, bit_depth, 4), + component(row, x, 2, bit_depth, 4), + component(row, x, 3, bit_depth, 4)); + return; + + default: + png_error(png_ptr, "invalid color type"); + } +} + +int main(int argc, const char **argv) +{ + /* This program uses the default, based, libpng error handling + * mechanism, therefore any local variable that exists before the call to + * setjmp and is changed after the call to setjmp returns successfully must + * be declared with 'volatile' to ensure that their values don't get + * destroyed by longjmp: + */ + volatile int result = 1/*fail*/; + + if (argc == 4) + { + long x = atol(argv[1]); + long y = atol(argv[2]); + FILE *f = fopen(argv[3], "rb"); + volatile png_bytep row = NULL; + + if (f != NULL) + { + /* libpng requires a callback function for handling errors; this + * callback must not return. The default callback function uses a + * stored style jmp_buf which is held in a png_struct and + * writes error messages to stderr. Creating the png_struct is a + * little tricky; just copy the following code. + */ + png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, + NULL, NULL, NULL); + + if (png_ptr != NULL) + { + png_infop info_ptr = png_create_info_struct(png_ptr); + + if (info_ptr != NULL) + { + /* Declare stack variables to hold pointers to locally allocated + * data. + */ + + /* Initialize the error control buffer: */ + if (setjmp(png_jmpbuf(png_ptr)) == 0) + { + png_uint_32 width, height; + int bit_depth, color_type, interlace_method, + compression_method, filter_method; + png_bytep row_tmp; + + /* Now associate the recently opened (FILE*) with the default + * libpng initialization functions. Sometimes libpng is + * compiled without stdio support (it can be difficult to do + * in some environments); in that case you will have to write + * your own read callback to read data from the (FILE*). + */ + png_init_io(png_ptr, f); + + /* And read the first part of the PNG file - the header and + * all the information up to the first pixel. + */ + png_read_info(png_ptr, info_ptr); + + /* This fills in enough information to tell us the width of + * each row in bytes, allocate the appropriate amount of + * space. In this case png_malloc is used - it will not + * return if memory isn't available. + */ + row = png_malloc(png_ptr, png_get_rowbytes(png_ptr, + info_ptr)); + + /* To avoid the overhead of using a volatile auto copy row_tmp + * to a local here - just use row for the png_free below. + */ + row_tmp = row; + + /* All the information we need is in the header is returned by + * png_get_IHDR, if this fails we can now use 'png_error' to + * signal the error and return control to the setjmp above. + */ + if (png_get_IHDR(png_ptr, info_ptr, &width, &height, + &bit_depth, &color_type, &interlace_method, + &compression_method, &filter_method)) + { + int passes, pass; + + /* png_set_interlace_handling returns the number of + * passes required as well as turning on libpng's + * handling, but since we do it ourselves this is + * necessary: + */ + switch (interlace_method) + { + case PNG_INTERLACE_NONE: + passes = 1; + break; + + case PNG_INTERLACE_ADAM7: + passes = PNG_INTERLACE_ADAM7_PASSES; + break; + + default: + png_error(png_ptr, "pngpixel: unknown interlace"); + } + + /* Now read the pixels, pass-by-pass, row-by-row: */ + png_start_read_image(png_ptr); + + for (pass=0; pass +#include +#include +#include + +/* Normally use here to get the installed libpng, but this is done to + * ensure the code picks up the local libpng implementation: + */ +#include "../../png.h" + +int main(int argc, const char **argv) +{ + int result = 1; + + if (argc == 3) + { + png_image image; + + /* Only the image structure version number needs to be set. */ + memset(&image, 0, sizeof image); + image.version = PNG_IMAGE_VERSION; + + if (png_image_begin_read_from_file(&image, argv[1])) + { + png_bytep buffer; + + /* Change this to try different formats! If you set a colormap format + * then you must also supply a colormap below. + */ + image.format = PNG_FORMAT_RGBA; + + buffer = malloc(PNG_IMAGE_SIZE(image)); + + if (buffer != NULL) + { + if (png_image_finish_read(&image, NULL/*background*/, buffer, + 0/*row_stride*/, NULL/*colormap for PNG_FORMAT_FLAG_COLORMAP */)) + { + if (png_image_write_to_file(&image, argv[2], + 0/*convert_to_8bit*/, buffer, 0/*row_stride*/, + NULL/*colormap*/)) + result = 0; + + else + fprintf(stderr, "pngtopng: write %s: %s\n", argv[2], + image.message); + + free(buffer); + } + + else + { + fprintf(stderr, "pngtopng: read %s: %s\n", argv[1], + image.message); + + /* This is the only place where a 'free' is required; libpng does + * the cleanup on error and success, but in this case we couldn't + * complete the read because of running out of memory. + */ + png_image_free(&image); + } + } + + else + fprintf(stderr, "pngtopng: out of memory: %lu bytes\n", + (unsigned long)PNG_IMAGE_SIZE(image)); + } + + else + /* Failed to read the first argument: */ + fprintf(stderr, "pngtopng: %s: %s\n", argv[1], image.message); + } + + else + /* Wrong number of arguments */ + fprintf(stderr, "pngtopng: usage: pngtopng input-file output-file\n"); + + return result; +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/COPYING b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/COPYING new file mode 100644 index 000000000..a3e977479 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/COPYING @@ -0,0 +1,340 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/LICENSE b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/LICENSE new file mode 100644 index 000000000..d9567178c --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/LICENSE @@ -0,0 +1,50 @@ + --------------------------------------------------------------------------- + + Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + --------------------------------------------------------------------------- diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.mingw32 b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.mingw32 new file mode 100644 index 000000000..e70a59aef --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.mingw32 @@ -0,0 +1,130 @@ +# Sample makefile for rpng-win / rpng2-win / wpng using mingw32-gcc and make. +# Greg Roelofs +# Last modified: 2 June 2007 +# +# The programs built by this makefile are described in the book, +# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and +# Associates, 1999). Go buy a copy, eh? Well, OK, it's not +# generally for sale anymore, but it's the thought that counts, +# right? (Hint: http://www.libpng.org/pub/png/book/ ) +# +# Invoke this makefile from a DOS-prompt window via: +# +# make -f Makefile.mingw32 +# +# This makefile assumes libpng and zlib have already been built or downloaded +# and are in subdirectories at the same level as the current subdirectory +# (as indicated by the PNGDIR and ZDIR macros below). It makes no assumptions +# at all about the mingw32 installation tree (W32DIR). Edit as appropriate. +# +# Note that the names of the dynamic and static libpng and zlib libraries +# used below may change in later releases of the libraries. This makefile +# builds both statically and dynamically linked executables by default. +# (You need only one set, but for testing it can be handy to have both.) + + +# macros -------------------------------------------------------------------- + +#PNGDIR = ../..# for libpng-x.y.z/contrib/gregbook builds +PNGDIR = ../libpng-win32 +PNGINC = -I$(PNGDIR) +PNGLIBd = $(PNGDIR)/libpng.dll.a # dynamically linked +PNGLIBs = $(PNGDIR)/libpng.a # statically linked, local libpng + +#ZDIR = ../../../zlib-win32# for libpng-x.y.z/contrib/gregbook builds +ZDIR = ../zlib-win32 +ZINC = -I$(ZDIR) +ZLIBd = $(ZDIR)/libzdll.a +ZLIBs = $(ZDIR)/libz.a + +# change this to be the path where mingw32 installs its stuff: +W32DIR = +#W32DIR = /usr/local/cross-tools/i386-mingw32msvc +W32INC = -I$(W32DIR)/include +W32LIB = $(W32DIR)/lib/libuser32.a $(W32DIR)/lib/libgdi32.a + +CC = gcc +#CC = i386-mingw32msvc-gcc # e.g., Linux -> Win32 cross-compilation +LD = $(CC) +RM = rm -f +CFLAGS = -O -Wall $(INCS) $(MINGW_CCFLAGS) +# [note that -Wall is a gcc-specific compilation flag ("most warnings on")] +# [-ansi, -pedantic and -W can also be used] +LDFLAGS = $(MINGW_LDFLAGS) +O = .o +E = .exe + +INCS = $(PNGINC) $(ZINC) $(W32INC) +RLIBSd = $(PNGLIBd) $(ZLIBd) $(W32LIB) -lm +RLIBSs = $(PNGLIBs) $(ZLIBs) $(W32LIB) -lm +WLIBSd = $(PNGLIBd) $(ZLIBd) +WLIBSs = $(PNGLIBs) $(ZLIBs) + +RPNG = rpng-win +RPNG2 = rpng2-win +WPNG = wpng + +ROBJSd = $(RPNG)$(O) readpng.pic$(O) +ROBJS2d = $(RPNG2)$(O) readpng2.pic$(O) +WOBJSd = $(WPNG)$(O) writepng.pic$(O) + +RPNGs = $(RPNG)-static +RPNG2s = $(RPNG2)-static +WPNGs = $(WPNG)-static + +ROBJSs = $(RPNG)$(O) readpng$(O) +ROBJS2s = $(RPNG2)$(O) readpng2$(O) +WOBJSs = $(WPNG)$(O) writepng$(O) + +STATIC_EXES = $(RPNGs)$(E) $(RPNG2s)$(E) $(WPNGs)$(E) +DYNAMIC_EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) + +EXES = $(STATIC_EXES) $(DYNAMIC_EXES) + + +# implicit make rules ------------------------------------------------------- + +.c$(O): + $(CC) -c $(CFLAGS) $< + +%.pic$(O): %.c + $(CC) -c $(CFLAGS) -DPNG_BUILD_DLL -o $@ $< + + +# dependencies -------------------------------------------------------------- + +all: $(EXES) + +$(RPNGs)$(E): $(ROBJSs) + $(LD) $(LDFLAGS) -o $@ $(ROBJSs) $(RLIBSs) + +$(RPNG)$(E): $(ROBJSd) + $(LD) $(LDFLAGS) -o $@ $(ROBJSd) $(RLIBSd) + +$(RPNG2s)$(E): $(ROBJS2s) + $(LD) $(LDFLAGS) -o $@ $(ROBJS2s) $(RLIBSs) + +$(RPNG2)$(E): $(ROBJS2d) + $(LD) $(LDFLAGS) -o $@ $(ROBJS2d) $(RLIBSd) + +$(WPNGs)$(E): $(WOBJSs) + $(LD) $(LDFLAGS) -o $@ $(WOBJSs) $(WLIBSs) + +$(WPNG)$(E): $(WOBJSd) + $(LD) $(LDFLAGS) -o $@ $(WOBJSd) $(WLIBSd) + +$(RPNG)$(O): $(RPNG).c readpng.h +$(RPNG2)$(O): $(RPNG2).c readpng2.h +$(WPNG)$(O): $(WPNG).c writepng.h + +readpng$(O) readpng.pic$(O): readpng.c readpng.h +readpng2$(O) readpng2.pic$(O): readpng2.c readpng2.h +writepng$(O) writepng.pic$(O): writepng.c writepng.h + + +# maintenance --------------------------------------------------------------- + +clean: + $(RM) $(EXES) + $(RM) $(ROBJSs) $(ROBJS2s) $(WOBJSs) + $(RM) $(ROBJSd) $(ROBJS2d) $(WOBJSd) diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.sgi b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.sgi new file mode 100644 index 000000000..6c3bdf191 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.sgi @@ -0,0 +1,104 @@ +# Sample makefile for rpng-x / rpng2-x / wpng for SGI using cc and make. +# Greg Roelofs +# Last modified: 7 March 2002 +# +# The programs built by this makefile are described in the book, +# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and +# Associates, 1999). Go buy a copy, eh? Buy some for friends +# and family, too. (Not that this is a blatant plug or anything.) +# +# Invoke this makefile from a shell prompt in the usual way; for example: +# +# make -f Makefile.sgi +# +# This makefile assumes libpng and zlib have already been built or downloaded +# and are both installed in /usr/local/{include,lib} (as indicated by the +# PNG* and Z* macros below). Edit as appropriate--choose only ONE each of +# the PNGINC, PNGLIB, ZINC and ZLIB lines. +# +# This makefile builds dynamically linked executables (against libpng and zlib, +# that is), but that can be changed by uncommenting the appropriate PNGLIB and +# ZLIB lines. + + +# macros -------------------------------------------------------------------- + +PNGINC = -I/usr/local/include/libpng16 +PNGLIB = -L/usr/local/lib -lpng16 # dynamically linked against libpng +#PNGLIB = /usr/local/lib/libpng16.a # statically linked against libpng +# or: +#PNGINC = -I../.. +#PNGLIB = -L../.. -lpng +#PNGLIB = ../../libpng.a + +ZINC = -I/usr/local/include +ZLIB = -L/usr/local/lib -lz # dynamically linked against zlib +#ZLIB = /usr/local/lib/libz.a # statically linked against zlib +#ZINC = -I../zlib +#ZLIB = -L../zlib -lz +#ZLIB = ../../../zlib/libz.a + +XINC = -I/usr/include/X11 # old-style, stock X distributions +XLIB = -L/usr/lib/X11 -lX11 +#XINC = -I/usr/openwin/include # Sun workstations (OpenWindows) +#XLIB = -L/usr/openwin/lib -lX11 +#XINC = -I/usr/X11R6/include # new X distributions (XFree86, etc.) +#XLIB = -L/usr/X11R6/lib -lX11 + +INCS = $(PNGINC) $(ZINC) $(XINC) +RLIBS = $(PNGLIB) $(ZLIB) $(XLIB) -lm +WLIBS = $(PNGLIB) $(ZLIB) + +CC = cc +LD = cc +RM = rm -f +# ABI must be the same as that used to build libpng. +ABI= +CFLAGS = $(ABI) -O -fullwarn $(INCS) +LDFLAGS = $(ABI) +O = .o +E = + +RPNG = rpng-x +RPNG2 = rpng2-x +WPNG = wpng + +ROBJS = $(RPNG)$(O) readpng$(O) +ROBJS2 = $(RPNG2)$(O) readpng2$(O) +WOBJS = $(WPNG)$(O) writepng$(O) + +EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) + + +# implicit make rules ------------------------------------------------------- + +.c$(O): + $(CC) -c $(CFLAGS) $< + + +# dependencies -------------------------------------------------------------- + +all: $(EXES) + +$(RPNG)$(E): $(ROBJS) + $(LD) $(LDFLAGS) -o $@ $(ROBJS) $(RLIBS) + +$(RPNG2)$(E): $(ROBJS2) + $(LD) $(LDFLAGS) -o $@ $(ROBJS2) $(RLIBS) + +$(WPNG)$(E): $(WOBJS) + $(LD) $(LDFLAGS) -o $@ $(WOBJS) $(WLIBS) + +$(RPNG)$(O): $(RPNG).c readpng.h +$(RPNG2)$(O): $(RPNG2).c readpng2.h +$(WPNG)$(O): $(WPNG).c writepng.h + +readpng$(O): readpng.c readpng.h +readpng2$(O): readpng2.c readpng2.h +writepng$(O): writepng.c writepng.h + + +# maintenance --------------------------------------------------------------- + +clean: + $(RM) $(EXES) $(ROBJS) $(ROBJS2) $(WOBJS) diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.unx b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.unx new file mode 100644 index 000000000..d5e4f355a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.unx @@ -0,0 +1,132 @@ +# Sample makefile for rpng-x / rpng2-x / wpng using gcc and make. +# Greg Roelofs +# Last modified: 2 June 2007 +# +# The programs built by this makefile are described in the book, +# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and +# Associates, 1999). Go buy a copy, eh? Well, OK, it's not +# generally for sale anymore, but it's the thought that counts, +# right? (Hint: http://www.libpng.org/pub/png/book/ ) +# +# Invoke this makefile from a shell prompt in the usual way; for example: +# +# make -f Makefile.unx +# +# This makefile assumes libpng and zlib have already been built or downloaded +# and are installed in /usr/local/{include,lib} or as otherwise indicated by +# the PNG* and Z* macros below. Edit as appropriate--choose only ONE each of +# the PNGINC, PNGLIBd, PNGLIBs, ZINC, ZLIBd and ZLIBs lines. +# +# This makefile builds both dynamically and statically linked executables +# (against libpng and zlib, that is), but that can be changed by modifying +# the "EXES =" line. (You need only one set, but for testing it can be handy +# to have both.) + + +# macros -------------------------------------------------------------------- + +#PNGDIR = /usr/local/lib +#PNGINC = -I/usr/local/include/libpng16 +#PNGLIBd = -L$(PNGDIR) -lpng16 # dynamically linked, installed libpng +#PNGLIBs = $(PNGDIR)/libpng16.a # statically linked, installed libpng +# or: +PNGDIR = ../..# this one is for libpng-x.y.z/contrib/gregbook builds +#PNGDIR = ../libpng +PNGINC = -I$(PNGDIR) +PNGLIBd = -Wl,-rpath,$(PNGDIR) -L$(PNGDIR) -lpng16 # dynamically linked +PNGLIBs = $(PNGDIR)/libpng.a # statically linked, local libpng + +ZDIR = /usr/local/lib +#ZDIR = /usr/lib64 +ZINC = -I/usr/local/include +ZLIBd = -L$(ZDIR) -lz # dynamically linked against zlib +ZLIBs = $(ZDIR)/libz.a # statically linked against zlib +# or: +#ZDIR = ../zlib +#ZINC = -I$(ZDIR) +#ZLIBd = -Wl,-rpath,$(ZDIR) -L$(ZDIR) -lz # -rpath allows in-place testing +#ZLIBs = $(ZDIR)/libz.a + +#XINC = -I/usr/include # old-style, stock X distributions +#XLIB = -L/usr/lib/X11 -lX11 # (including SGI IRIX) +#XINC = -I/usr/openwin/include # Sun workstations (OpenWindows) +#XLIB = -L/usr/openwin/lib -lX11 +XINC = -I/usr/X11R6/include # new X distributions (X.org, etc.) +XLIB = -L/usr/X11R6/lib -lX11 +#XLIB = -L/usr/X11R6/lib64 -lX11 # e.g., Red Hat on AMD64 + +INCS = $(PNGINC) $(ZINC) $(XINC) +RLIBSd = $(PNGLIBd) $(ZLIBd) $(XLIB) -lm +RLIBSs = $(PNGLIBs) $(ZLIBs) $(XLIB) -lm +WLIBSd = $(PNGLIBd) $(ZLIBd) -lm +WLIBSs = $(PNGLIBs) $(ZLIBs) + +CC = gcc +LD = gcc +RM = rm -f +CFLAGS = -O -Wall $(INCS) -DFEATURE_LOOP +# [note that -Wall is a gcc-specific compilation flag ("most warnings on")] +# [-ansi, -pedantic and -W can also be used] +LDFLAGS = +O = .o +E = + +RPNG = rpng-x +RPNG2 = rpng2-x +WPNG = wpng + +RPNGs = $(RPNG)-static +RPNG2s = $(RPNG2)-static +WPNGs = $(WPNG)-static + +ROBJS = $(RPNG)$(O) readpng$(O) +ROBJS2 = $(RPNG2)$(O) readpng2$(O) +WOBJS = $(WPNG)$(O) writepng$(O) + +STATIC_EXES = $(RPNGs)$(E) $(RPNG2s)$(E) $(WPNGs)$(E) +DYNAMIC_EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) + +EXES = $(STATIC_EXES) $(DYNAMIC_EXES) + + +# implicit make rules ------------------------------------------------------- + +.c$(O): + $(CC) -c $(CFLAGS) $< + + +# dependencies -------------------------------------------------------------- + +all: $(EXES) + +$(RPNGs)$(E): $(ROBJS) + $(LD) $(LDFLAGS) -o $@ $(ROBJS) $(RLIBSs) + +$(RPNG)$(E): $(ROBJS) + $(LD) $(LDFLAGS) -o $@ $(ROBJS) $(RLIBSd) + +$(RPNG2s)$(E): $(ROBJS2) + $(LD) $(LDFLAGS) -o $@ $(ROBJS2) $(RLIBSs) + +$(RPNG2)$(E): $(ROBJS2) + $(LD) $(LDFLAGS) -o $@ $(ROBJS2) $(RLIBSd) + +$(WPNGs)$(E): $(WOBJS) + $(LD) $(LDFLAGS) -o $@ $(WOBJS) $(WLIBSs) + +$(WPNG)$(E): $(WOBJS) + $(LD) $(LDFLAGS) -o $@ $(WOBJS) $(WLIBSd) + +$(RPNG)$(O): $(RPNG).c readpng.h +$(RPNG2)$(O): $(RPNG2).c readpng2.h +$(WPNG)$(O): $(WPNG).c writepng.h + +readpng$(O): readpng.c readpng.h +readpng2$(O): readpng2.c readpng2.h +writepng$(O): writepng.c writepng.h + + +# maintenance --------------------------------------------------------------- + +clean: + $(RM) $(EXES) $(ROBJS) $(ROBJS2) $(WOBJS) diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.w32 b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.w32 new file mode 100644 index 000000000..41cfb231a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/Makefile.w32 @@ -0,0 +1,113 @@ +# Sample makefile for rpng-win / rpng2-win / wpng using MSVC and NMAKE. +# Greg Roelofs +# Last modified: 2 June 2007 +# +# The programs built by this makefile are described in the book, +# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and +# Associates, 1999). Go buy a copy, eh? Well, OK, it's not +# generally for sale anymore, but it's the thought that counts, +# right? (Hint: http://www.libpng.org/pub/png/book/ ) +# +# Invoke this makefile from a DOS prompt window via: +# +# %devstudio%\vc\bin\vcvars32.bat +# nmake -nologo -f Makefile.w32 +# +# where %devstudio% is the installation directory for MSVC / DevStudio. If +# you get "environment out of space" errors, create a desktop shortcut with +# "c:\windows\command.com /e:4096" as the program command line and set the +# working directory to this directory. Then double-click to open the new +# DOS-prompt window with a bigger environment and retry the commands above. +# +# This makefile assumes libpng and zlib have already been built or downloaded +# and are in subdirectories at the same level as the current subdirectory +# (as indicated by the PNGPATH and ZPATH macros below). Edit as appropriate. +# +# Note that the names of the dynamic and static libpng and zlib libraries +# used below may change in later releases of the libraries. This makefile +# builds statically linked executables, but that can be changed by uncom- +# menting the appropriate PNGLIB and ZLIB lines. + +!include + + +# macros -------------------------------------------------------------------- + +PNGPATH = ../libpng +PNGINC = -I$(PNGPATH) +#PNGLIB = $(PNGPATH)/pngdll.lib +PNGLIB = $(PNGPATH)/libpng.lib + +ZPATH = ../zlib +ZINC = -I$(ZPATH) +#ZLIB = $(ZPATH)/zlibdll.lib +ZLIB = $(ZPATH)/zlibstat.lib + +WINLIBS = -defaultlib:user32.lib gdi32.lib +# ["real" apps may also need comctl32.lib, comdlg32.lib, winmm.lib, etc.] + +INCS = $(PNGINC) $(ZINC) +RLIBS = $(PNGLIB) $(ZLIB) $(WINLIBS) +WLIBS = $(PNGLIB) $(ZLIB) + +CC = cl +LD = link +RM = del +CFLAGS = -nologo -O -W3 $(INCS) $(cvars) +# [note that -W3 is an MSVC-specific compilation flag ("all warnings on")] +# [see %devstudio%\vc\include\win32.mak for cvars macro definition] +O = .obj +E = .exe + +RLDFLAGS = -nologo -subsystem:windows +WLDFLAGS = -nologo + +RPNG = rpng-win +RPNG2 = rpng2-win +WPNG = wpng + +ROBJS = $(RPNG)$(O) readpng$(O) +ROBJS2 = $(RPNG2)$(O) readpng2$(O) +WOBJS = $(WPNG)$(O) writepng$(O) + +EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) + + +# implicit make rules ------------------------------------------------------- + +.c$(O): + $(CC) -c $(CFLAGS) $< + + +# dependencies -------------------------------------------------------------- + +all: $(EXES) + +$(RPNG)$(E): $(ROBJS) + $(LD) $(RLDFLAGS) -out:$@ $(ROBJS) $(RLIBS) + +$(RPNG2)$(E): $(ROBJS2) + $(LD) $(RLDFLAGS) -out:$@ $(ROBJS2) $(RLIBS) + +$(WPNG)$(E): $(WOBJS) + $(LD) $(WLDFLAGS) -out:$@ $(WOBJS) $(WLIBS) + +$(RPNG)$(O): $(RPNG).c readpng.h +$(RPNG2)$(O): $(RPNG2).c readpng2.h +$(WPNG)$(O): $(WPNG).c writepng.h + +readpng$(O): readpng.c readpng.h +readpng2$(O): readpng2.c readpng2.h +writepng$(O): writepng.c writepng.h + + +# maintenance --------------------------------------------------------------- + +clean: +# ideally we could just do this: +# $(RM) $(EXES) $(ROBJS) $(ROBJS2) $(WOBJS) +# ...but the Windows "DEL" command is none too bright, so: + $(RM) r*$(E) + $(RM) w*$(E) + $(RM) r*$(O) + $(RM) w*$(O) diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/README b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/README new file mode 100644 index 000000000..7b1f6a3ea --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/README @@ -0,0 +1,186 @@ + =========================== + PNG: The Definitive Guide + =========================== + + Source Code + +Chapters 13, 14 and 15 of "PNG: The Definitive Guide" discuss three free, +cross-platform demo programs that show how to use the libpng reference +library: rpng, rpng2 and wpng. rpng and rpng2 are viewers; the first is +a very simple example that that shows how a standard file-viewer might use +libpng, while the second is designed to process streaming data and shows +how a web browser might be written. wpng is a simple command-line program +that reads binary PGM and PPM files (the ``raw'' grayscale and RGB subsets +of PBMPLUS/NetPBM) and converts them to PNG. + +The source code for all three demo programs currently compiles under +Unix, OpenVMS, and 32-bit Windows. (Special thanks to Martin Zinser, +zinser@decus.de, for making the necessary changes for OpenVMS and for +providing an appropriate build script.) Build instructions can be found +below. + +Files: + + README this file + LICENSE terms of distribution and reuse (BSD-like or GNU GPL) + COPYING GNU General Public License (GPL) + + Makefile.unx Unix makefile + Makefile.w32 Windows (MSVC) makefile + makevms.com OpenVMS build script + + rpng-win.c Windows front end for the basic viewer + rpng-x.c X Window System (Unix, OpenVMS) front end + readpng.c generic back end for the basic viewer + readpng.h header file for the basic viewer + + rpng2-win.c Windows front end for the progressive viewer + rpng2-x.c X front end for the progressive viewer + readpng2.c generic back end for the progressive viewer + readpng2.h header file for the progressive viewer + + wpng.c generic (text) front end for the converter + writepng.c generic back end for the converter + writepng.h header file for the converter + + toucan.png transparent PNG for testing (by Stefan Schneider) + +Note that, although the programs are designed to be functional, their +primary purpose is to illustrate how to use libpng to add PNG support to +other programs. As such, their user interfaces are crude and definitely +are not intended for everyday use. + +Please see http://www.libpng.org/pub/png/pngbook.html for further infor- +mation and links to the latest version of the source code, and Chapters +13-15 of the book for detailed discussion of the three programs. + +Greg Roelofs +http://pobox.com/~newt/greg_contact.html +16 March 2008 + + +BUILD INSTRUCTIONS + + - Prerequisites (in order of compilation): + + - zlib http://zlib.net/ + - libpng http://www.libpng.org/pub/png/libpng.html + - pngbook http://www.libpng.org/pub/png/book/sources.html + + The pngbook demo programs are explicitly designed to demonstrate proper + coding techniques for using the libpng reference library. As a result, + you need to download and build both zlib (on which libpng depends) and + libpng. A common build setup is to place the zlib, libpng and pngbook + subdirectory trees ("folders") in the same parent directory. Then the + libpng build can refer to files in ../zlib (or ..\zlib or [-.zlib]), + and similarly for the pngbook build. + + Note that all three packages are designed to be built from a command + line by default; those who wish to use a graphical or other integrated + development environments are on their own. + + + - Unix: + + Unpack the latest pngbook sources (which should correspond to this + README file) into a directory and change into that directory. + + Copy Makefile.unx to Makefile and edit the PNG* and Z* variables + appropriately (possibly also the X* variables if necessary). + + make + + There is no "install" target, so copy the three executables somewhere + in your path or run them from the current directory. All three will + print a basic usage screen when run without any command-line arguments; + see the book for more details. + + + - Windows: + + Unpack the latest pngbook sources (which should correspond to this + README file) into a folder, open a "DOS shell" or "command prompt" + or equivalent command-line window, and cd into the folder where you + unpacked the source code. + + For MSVC, set up the necessary environment variables by invoking + + %devstudio%\vc\bin\vcvars32.bat + + where where %devstudio% is the installation directory for MSVC / + DevStudio. If you get "environment out of space" errors under 95/98, + create a desktop shortcut with "c:\windows\command.com /e:4096" as + the program command line and set the working directory to the pngbook + directory. Then double-click to open the new DOS-prompt window with + a bigger environment and retry the commands above. + + Copy Makefile.w32 to Makefile and edit the PNGPATH and ZPATH variables + appropriately (possibly also the "INC" and "LIB" variables if needed). + Note that the names of the dynamic and static libpng and zlib libraries + used in the makefile may change in later releases of the libraries. + Also note that, as of libpng version 1.0.5, MSVC DLL builds do not work. + This makefile therefore builds statically linked executables, but if + the DLL problems ever get fixed, uncommenting the appropriate PNGLIB + and ZLIB lines will build dynamically linked executables instead. + + Do the build by typing + + nmake + + The result should be three executables: rpng-win.exe, rpng2-win.exe, + and wpng.exe. Copy them somewhere in your PATH or run them from the + current folder. Like the Unix versions, the two windowed programs + (rpng and rpng2) now display a usage screen in a console window when + invoked without command-line arguments; this is new behavior as of + the June 2001 release. Note that the programs use the Unix-style "-" + character to specify options, instead of the more common DOS/Windows + "/" character. (For example: "rpng2-win -bgpat 4 foo.png", not + "rpng2-win /bgpat 4 foo.png") + + + - OpenVMS: + + Unpack the pngbook sources into a subdirectory and change into that + subdirectory. + + Edit makevms.com appropriately, specifically the zpath and pngpath + variables. + + @makevms + + To run the programs, they probably first need to be set up as "foreign + symbols," with "disk" and "dir" set appropriately: + + $ rpng == "$disk:[dir]rpng-x.exe" + $ rpng2 == "$disk:[dir]rpng2-x.exe" + $ wpng == "$disk:[dir]wpng.exe" + + All three will print a basic usage screen when run without any command- + line arguments; see the book for more details. Note that the options + style is Unix-like, i.e., preceded by "-" rather than "/". + + +RUNNING THE PROGRAMS: (VERY) BRIEF INTRO + + rpng is a simple PNG viewer that can display transparent PNGs with a + specified background color; for example, + + rpng -bgcolor \#ff0000 toucan.png + + would display the image with a red background. rpng2 is a progressive + viewer that simulates a web browser in some respects; it can display + images against either a background color or a dynamically generated + background image. For example: + + rpng2 -bgpat 16 toucan.png + + wpng is a purely command-line image converter from binary PBMPLUS/NetPBM + format (.pgm or .ppm) to PNG; for example, + + wpng -time < toucan-notrans.ppm > toucan-notrans.png + + would convert the specified PPM file (using redirection) to PNG, auto- + matically setting the PNG modification-time chunk. + + All options can be abbreviated to the shortest unique value; for example, + "-bgc" for -bgcolor (versus "-bgp" for -bgpat), or "-g" for -gamma. diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/makevms.com b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/makevms.com new file mode 100644 index 000000000..f32bcaba7 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/makevms.com @@ -0,0 +1,132 @@ +$!------------------------------------------------------------------------------ +$! make "PNG: The Definitive Guide" demo programs (for X) under OpenVMS +$! +$! Script created by Martin Zinser for libpng; modified by Greg Roelofs +$! for standalone pngbook source distribution. +$! +$! +$! Set locations where zlib and libpng sources live. +$! +$ zpath = "" +$ pngpath = "" +$! +$ if f$search("[---.zlib]zlib.h").nes."" then zpath = "[---.zlib]" +$ if f$search("[--]png.h").nes."" then pngpath = "[--]" +$! +$ if f$search("[-.zlib]zlib.h").nes."" then zpath = "[-.zlib]" +$ if f$search("[-.libpng]png.h").nes."" then pngpath = "[-.libpng]" +$! +$ if zpath .eqs. "" +$ then +$ write sys$output "zlib include not found. Exiting..." +$ exit 2 +$ endif +$! +$ if pngpath .eqs. "" +$ then +$ write sys$output "libpng include not found. Exiting..." +$ exit 2 +$ endif +$! +$! Look for the compiler used. +$! +$ ccopt="/include=(''zpath',''pngpath')" +$ if f$getsyi("HW_MODEL").ge.1024 +$ then +$ ccopt = "/prefix=all"+ccopt +$ comp = "__decc__=1" +$ if f$trnlnm("SYS").eqs."" then define sys sys$library: +$ else +$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs."" +$ then +$ if f$trnlnm("SYS").eqs."" then define sys sys$library: +$ if f$search("SYS$SYSTEM:VAXC.EXE").eqs."" +$ then +$ comp = "__gcc__=1" +$ CC :== GCC +$ else +$ comp = "__vaxc__=1" +$ endif +$ else +$ if f$trnlnm("SYS").eqs."" then define sys decc$library_include: +$ ccopt = "/decc/prefix=all"+ccopt +$ comp = "__decc__=1" +$ endif +$ endif +$ open/write lopt lib.opt +$ write lopt "''pngpath'libpng.olb/lib" +$ write lopt "''zpath'libz.olb/lib" +$ close lopt +$ open/write xopt x11.opt +$ write xopt "sys$library:decw$xlibshr.exe/share" +$ close xopt +$! +$! Build 'em. +$! +$ write sys$output "Compiling PNG book programs ..." +$ CALL MAKE readpng.OBJ "cc ''CCOPT' readpng" - + readpng.c readpng.h +$ CALL MAKE readpng2.OBJ "cc ''CCOPT' readpng2" - + readpng2.c readpng2.h +$ CALL MAKE writepng.OBJ "cc ''CCOPT' writepng" - + writepng.c writepng.h +$ write sys$output "Building rpng-x..." +$ CALL MAKE rpng-x.OBJ "cc ''CCOPT' rpng-x" - + rpng-x.c readpng.h +$ call make rpng-x.exe - + "LINK rpng-x,readpng,lib.opt/opt,x11.opt/opt" - + rpng-x.obj readpng.obj +$ write sys$output "Building rpng2-x..." +$ CALL MAKE rpng2-x.OBJ "cc ''CCOPT' rpng2-x" - + rpng2-x.c readpng2.h +$ call make rpng2-x.exe - + "LINK rpng2-x,readpng2,lib.opt/opt,x11.opt/opt" - + rpng2-x.obj readpng2.obj +$ write sys$output "Building wpng..." +$ CALL MAKE wpng.OBJ "cc ''CCOPT' wpng" - + wpng.c writepng.h +$ call make wpng.exe - + "LINK wpng,writepng,lib.opt/opt" - + wpng.obj writepng.obj +$ exit +$! +$! +$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES +$ V = 'F$Verify(0) +$! P1 = What we are trying to make +$! P2 = Command to make it +$! P3 - P8 What it depends on +$ +$ If F$Search(P1) .Eqs. "" Then Goto Makeit +$ Time = F$CvTime(F$File(P1,"RDT")) +$arg=3 +$Loop: +$ Argument = P'arg +$ If Argument .Eqs. "" Then Goto Exit +$ El=0 +$Loop2: +$ File = F$Element(El," ",Argument) +$ If File .Eqs. " " Then Goto Endl +$ AFile = "" +$Loop3: +$ OFile = AFile +$ AFile = F$Search(File) +$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl +$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit +$ Goto Loop3 +$NextEL: +$ El = El + 1 +$ Goto Loop2 +$EndL: +$ arg=arg+1 +$ If arg .Le. 8 Then Goto Loop +$ Goto Exit +$ +$Makeit: +$ VV=F$VERIFY(0) +$ write sys$output P2 +$ 'P2 +$ VV='F$Verify(VV) +$Exit: +$ If V Then Set Verify +$ENDSUBROUTINE diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng.c b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng.c new file mode 100644 index 000000000..f5e1fb1a4 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng.c @@ -0,0 +1,316 @@ +/*--------------------------------------------------------------------------- + + rpng - simple PNG display program readpng.c + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#include +#include +#include + +#include "png.h" /* libpng header */ +#include "readpng.h" /* typedefs, common macros, public prototypes */ + +/* future versions of libpng will provide this macro: */ +#ifndef png_jmpbuf +# define png_jmpbuf(png_ptr) ((png_ptr)->jmpbuf) +#endif + + +static png_structp png_ptr = NULL; +static png_infop info_ptr = NULL; + +png_uint_32 width, height; +int bit_depth, color_type; +uch *image_data = NULL; + + +void readpng_version_info(void) +{ + fprintf(stderr, " Compiled with libpng %s; using libpng %s.\n", + PNG_LIBPNG_VER_STRING, png_libpng_ver); + fprintf(stderr, " Compiled with zlib %s; using zlib %s.\n", + ZLIB_VERSION, zlib_version); +} + + +/* return value = 0 for success, 1 for bad sig, 2 for bad IHDR, 4 for no mem */ + +int readpng_init(FILE *infile, ulg *pWidth, ulg *pHeight) +{ + uch sig[8]; + + + /* first do a quick check that the file really is a PNG image; could + * have used slightly more general png_sig_cmp() function instead */ + + fread(sig, 1, 8, infile); + if (png_sig_cmp(sig, 0, 8)) + return 1; /* bad signature */ + + + /* could pass pointers to user-defined error handlers instead of NULLs: */ + + png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL); + if (!png_ptr) + return 4; /* out of memory */ + + info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) { + png_destroy_read_struct(&png_ptr, NULL, NULL); + return 4; /* out of memory */ + } + + + /* we could create a second info struct here (end_info), but it's only + * useful if we want to keep pre- and post-IDAT chunk info separated + * (mainly for PNG-aware image editors and converters) */ + + + /* setjmp() must be called in every function that calls a PNG-reading + * libpng function */ + + if (setjmp(png_jmpbuf(png_ptr))) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return 2; + } + + + png_init_io(png_ptr, infile); + png_set_sig_bytes(png_ptr, 8); /* we already read the 8 signature bytes */ + + png_read_info(png_ptr, info_ptr); /* read all PNG info up to image data */ + + + /* alternatively, could make separate calls to png_get_image_width(), + * etc., but want bit_depth and color_type for later [don't care about + * compression_type and filter_type => NULLs] */ + + png_get_IHDR(png_ptr, info_ptr, &width, &height, &bit_depth, &color_type, + NULL, NULL, NULL); + *pWidth = width; + *pHeight = height; + + + /* OK, that's all we need for now; return happy */ + + return 0; +} + + + + +/* returns 0 if succeeds, 1 if fails due to no bKGD chunk, 2 if libpng error; + * scales values to 8-bit if necessary */ + +int readpng_get_bgcolor(uch *red, uch *green, uch *blue) +{ + png_color_16p pBackground; + + + /* setjmp() must be called in every function that calls a PNG-reading + * libpng function */ + + if (setjmp(png_jmpbuf(png_ptr))) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return 2; + } + + + if (!png_get_valid(png_ptr, info_ptr, PNG_INFO_bKGD)) + return 1; + + /* it is not obvious from the libpng documentation, but this function + * takes a pointer to a pointer, and it always returns valid red, green + * and blue values, regardless of color_type: */ + + png_get_bKGD(png_ptr, info_ptr, &pBackground); + + + /* however, it always returns the raw bKGD data, regardless of any + * bit-depth transformations, so check depth and adjust if necessary */ + + if (bit_depth == 16) { + *red = pBackground->red >> 8; + *green = pBackground->green >> 8; + *blue = pBackground->blue >> 8; + } else if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) { + if (bit_depth == 1) + *red = *green = *blue = pBackground->gray? 255 : 0; + else if (bit_depth == 2) + *red = *green = *blue = (255/3) * pBackground->gray; + else /* bit_depth == 4 */ + *red = *green = *blue = (255/15) * pBackground->gray; + } else { + *red = (uch)pBackground->red; + *green = (uch)pBackground->green; + *blue = (uch)pBackground->blue; + } + + return 0; +} + + + + +/* display_exponent == LUT_exponent * CRT_exponent */ + +uch *readpng_get_image(double display_exponent, int *pChannels, ulg *pRowbytes) +{ + double gamma; + png_uint_32 i, rowbytes; + png_bytepp row_pointers = NULL; + + + /* setjmp() must be called in every function that calls a PNG-reading + * libpng function */ + + if (setjmp(png_jmpbuf(png_ptr))) { + free(image_data); + image_data = NULL; + free(row_pointers); + row_pointers = NULL; + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return NULL; + } + + + /* expand palette images to RGB, low-bit-depth grayscale images to 8 bits, + * transparency chunks to full alpha channel; strip 16-bit-per-sample + * images to 8 bits per sample; and convert grayscale to RGB[A] */ + + if (color_type == PNG_COLOR_TYPE_PALETTE) + png_set_expand(png_ptr); + if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) + png_set_expand(png_ptr); + if (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS)) + png_set_expand(png_ptr); +#ifdef PNG_READ_16_TO_8_SUPPORTED + if (bit_depth == 16) +# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + png_set_scale_16(png_ptr); +# else + png_set_strip_16(png_ptr); +# endif +#endif + if (color_type == PNG_COLOR_TYPE_GRAY || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_gray_to_rgb(png_ptr); + + + /* unlike the example in the libpng documentation, we have *no* idea where + * this file may have come from--so if it doesn't have a file gamma, don't + * do any correction ("do no harm") */ + + if (png_get_gAMA(png_ptr, info_ptr, &gamma)) + png_set_gamma(png_ptr, display_exponent, gamma); + + + /* all transformations have been registered; now update info_ptr data, + * get rowbytes and channels, and allocate image memory */ + + png_read_update_info(png_ptr, info_ptr); + + *pRowbytes = rowbytes = png_get_rowbytes(png_ptr, info_ptr); + *pChannels = (int)png_get_channels(png_ptr, info_ptr); + + if ((image_data = (uch *)malloc(rowbytes*height)) == NULL) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return NULL; + } + if ((row_pointers = (png_bytepp)malloc(height*sizeof(png_bytep))) == NULL) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + free(image_data); + image_data = NULL; + return NULL; + } + + Trace((stderr, "readpng_get_image: channels = %d, rowbytes = %ld, height = %ld\n", + *pChannels, rowbytes, height)); + + + /* set the individual row_pointers to point at the correct offsets */ + + for (i = 0; i < height; ++i) + row_pointers[i] = image_data + i*rowbytes; + + + /* now we can go ahead and just read the whole image */ + + png_read_image(png_ptr, row_pointers); + + + /* and we're done! (png_read_end() can be omitted if no processing of + * post-IDAT text/time/etc. is desired) */ + + free(row_pointers); + row_pointers = NULL; + + png_read_end(png_ptr, NULL); + + return image_data; +} + + +void readpng_cleanup(int free_image_data) +{ + if (free_image_data && image_data) { + free(image_data); + image_data = NULL; + } + + if (png_ptr && info_ptr) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + png_ptr = NULL; + info_ptr = NULL; + } +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng.h b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng.h new file mode 100644 index 000000000..fad9fe3b4 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng.h @@ -0,0 +1,88 @@ +/*--------------------------------------------------------------------------- + + rpng - simple PNG display program readpng.h + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#ifndef TRUE +# define TRUE 1 +# define FALSE 0 +#endif + +#ifndef MAX +# define MAX(a,b) ((a) > (b)? (a) : (b)) +# define MIN(a,b) ((a) < (b)? (a) : (b)) +#endif + +#ifdef DEBUG +# define Trace(x) {fprintf x ; fflush(stderr); fflush(stdout);} +#else +# define Trace(x) ; +#endif + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + + +/* prototypes for public functions in readpng.c */ + +void readpng_version_info(void); + +int readpng_init(FILE *infile, ulg *pWidth, ulg *pHeight); + +int readpng_get_bgcolor(uch *bg_red, uch *bg_green, uch *bg_blue); + +uch *readpng_get_image(double display_exponent, int *pChannels, + ulg *pRowbytes); + +void readpng_cleanup(int free_image_data); diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng2.c b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng2.c new file mode 100644 index 000000000..e179db71e --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng2.c @@ -0,0 +1,505 @@ +/*--------------------------------------------------------------------------- + + rpng2 - progressive-model PNG display program readpng2.c + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + + +#include /* for exit() prototype */ +#include + +#include +#include "png.h" /* libpng header from the local directory */ +#include "readpng2.h" /* typedefs, common macros, public prototypes */ + + +/* local prototypes */ + +static void readpng2_info_callback(png_structp png_ptr, png_infop info_ptr); +static void readpng2_row_callback(png_structp png_ptr, png_bytep new_row, + png_uint_32 row_num, int pass); +static void readpng2_end_callback(png_structp png_ptr, png_infop info_ptr); +static void readpng2_error_handler(png_structp png_ptr, png_const_charp msg); + + + + +void readpng2_version_info(void) +{ + fprintf(stderr, " Compiled with libpng %s; using libpng %s\n", + PNG_LIBPNG_VER_STRING, png_libpng_ver); + + fprintf(stderr, " and with zlib %s; using zlib %s.\n", + ZLIB_VERSION, zlib_version); +} + + + + +int readpng2_check_sig(uch *sig, int num) +{ + return !png_sig_cmp(sig, 0, num); +} + + + + +/* returns 0 for success, 2 for libpng problem, 4 for out of memory */ + +int readpng2_init(mainprog_info *mainprog_ptr) +{ + png_structp png_ptr; /* note: temporary variables! */ + png_infop info_ptr; + + + /* could also replace libpng warning-handler (final NULL), but no need: */ + + png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, mainprog_ptr, + readpng2_error_handler, NULL); + if (!png_ptr) + return 4; /* out of memory */ + + info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) { + png_destroy_read_struct(&png_ptr, NULL, NULL); + return 4; /* out of memory */ + } + + + /* we could create a second info struct here (end_info), but it's only + * useful if we want to keep pre- and post-IDAT chunk info separated + * (mainly for PNG-aware image editors and converters) */ + + + /* setjmp() must be called in every function that calls a PNG-reading + * libpng function, unless an alternate error handler was installed-- + * but compatible error handlers must either use longjmp() themselves + * (as in this program) or exit immediately, so here we are: */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return 2; + } + + +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED + /* prepare the reader to ignore all recognized chunks whose data won't be + * used, i.e., all chunks recognized by libpng except for IHDR, PLTE, IDAT, + * IEND, tRNS, bKGD, gAMA, and sRGB (small performance improvement) */ + { + /* These byte strings were copied from png.h. If a future version + * of readpng2.c recognizes more chunks, add them to this list. + */ + static PNG_CONST png_byte chunks_to_process[] = { + 98, 75, 71, 68, '\0', /* bKGD */ + 103, 65, 77, 65, '\0', /* gAMA */ + 115, 82, 71, 66, '\0', /* sRGB */ + }; + + /* Ignore all chunks except for IHDR, PLTE, tRNS, IDAT, and IEND */ + png_set_keep_unknown_chunks(png_ptr, -1 /* PNG_HANDLE_CHUNK_NEVER */, + NULL, -1); + + /* But do not ignore chunks in the "chunks_to_process" list */ + png_set_keep_unknown_chunks(png_ptr, + 0 /* PNG_HANDLE_CHUNK_AS_DEFAULT */, chunks_to_process, + sizeof(chunks_to_process)/5); + } +#endif /* PNG_HANDLE_AS_UNKNOWN_SUPPORTED */ + + + /* instead of doing png_init_io() here, now we set up our callback + * functions for progressive decoding */ + + png_set_progressive_read_fn(png_ptr, mainprog_ptr, + readpng2_info_callback, readpng2_row_callback, readpng2_end_callback); + + + /* make sure we save our pointers for use in readpng2_decode_data() */ + + mainprog_ptr->png_ptr = png_ptr; + mainprog_ptr->info_ptr = info_ptr; + + + /* and that's all there is to initialization */ + + return 0; +} + + + + +/* returns 0 for success, 2 for libpng (longjmp) problem */ + +int readpng2_decode_data(mainprog_info *mainprog_ptr, uch *rawbuf, ulg length) +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + + /* setjmp() must be called in every function that calls a PNG-reading + * libpng function */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + mainprog_ptr->png_ptr = NULL; + mainprog_ptr->info_ptr = NULL; + return 2; + } + + + /* hand off the next chunk of input data to libpng for decoding */ + + png_process_data(png_ptr, info_ptr, rawbuf, length); + + return 0; +} + + + + +static void readpng2_info_callback(png_structp png_ptr, png_infop info_ptr) +{ + mainprog_info *mainprog_ptr; + int color_type, bit_depth; + png_uint_32 width, height; +#ifdef PNG_FLOATING_POINT_SUPPORTED + double gamma; +#else + png_fixed_point gamma; +#endif + + + /* setjmp() doesn't make sense here, because we'd either have to exit(), + * longjmp() ourselves, or return control to libpng, which doesn't want + * to see us again. By not doing anything here, libpng will instead jump + * to readpng2_decode_data(), which can return an error value to the main + * program. */ + + + /* retrieve the pointer to our special-purpose struct, using the png_ptr + * that libpng passed back to us (i.e., not a global this time--there's + * no real difference for a single image, but for a multithreaded browser + * decoding several PNG images at the same time, one needs to avoid mixing + * up different images' structs) */ + + mainprog_ptr = png_get_progressive_ptr(png_ptr); + + if (mainprog_ptr == NULL) { /* we be hosed */ + fprintf(stderr, + "readpng2 error: main struct not recoverable in info_callback.\n"); + fflush(stderr); + return; + /* + * Alternatively, we could call our error-handler just like libpng + * does, which would effectively terminate the program. Since this + * can only happen if png_ptr gets redirected somewhere odd or the + * main PNG struct gets wiped, we're probably toast anyway. (If + * png_ptr itself is NULL, we would not have been called.) + */ + } + + + /* this is just like in the non-progressive case */ + + png_get_IHDR(png_ptr, info_ptr, &width, &height, &bit_depth, &color_type, + NULL, NULL, NULL); + mainprog_ptr->width = (ulg)width; + mainprog_ptr->height = (ulg)height; + + + /* since we know we've read all of the PNG file's "header" (i.e., up + * to IDAT), we can check for a background color here */ + + if (mainprog_ptr->need_bgcolor && + png_get_valid(png_ptr, info_ptr, PNG_INFO_bKGD)) + { + png_color_16p pBackground; + + /* it is not obvious from the libpng documentation, but this function + * takes a pointer to a pointer, and it always returns valid red, + * green and blue values, regardless of color_type: */ + png_get_bKGD(png_ptr, info_ptr, &pBackground); + + /* however, it always returns the raw bKGD data, regardless of any + * bit-depth transformations, so check depth and adjust if necessary */ + if (bit_depth == 16) { + mainprog_ptr->bg_red = pBackground->red >> 8; + mainprog_ptr->bg_green = pBackground->green >> 8; + mainprog_ptr->bg_blue = pBackground->blue >> 8; + } else if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) { + if (bit_depth == 1) + mainprog_ptr->bg_red = mainprog_ptr->bg_green = + mainprog_ptr->bg_blue = pBackground->gray? 255 : 0; + else if (bit_depth == 2) + mainprog_ptr->bg_red = mainprog_ptr->bg_green = + mainprog_ptr->bg_blue = (255/3) * pBackground->gray; + else /* bit_depth == 4 */ + mainprog_ptr->bg_red = mainprog_ptr->bg_green = + mainprog_ptr->bg_blue = (255/15) * pBackground->gray; + } else { + mainprog_ptr->bg_red = (uch)pBackground->red; + mainprog_ptr->bg_green = (uch)pBackground->green; + mainprog_ptr->bg_blue = (uch)pBackground->blue; + } + } + + + /* as before, let libpng expand palette images to RGB, low-bit-depth + * grayscale images to 8 bits, transparency chunks to full alpha channel; + * strip 16-bit-per-sample images to 8 bits per sample; and convert + * grayscale to RGB[A] */ + + if (color_type == PNG_COLOR_TYPE_PALETTE) + png_set_expand(png_ptr); + if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) + png_set_expand(png_ptr); + if (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS)) + png_set_expand(png_ptr); +#ifdef PNG_READ_16_TO_8_SUPPORTED + if (bit_depth == 16) +# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + png_set_scale_16(png_ptr); +# else + png_set_strip_16(png_ptr); +# endif +#endif + if (color_type == PNG_COLOR_TYPE_GRAY || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_gray_to_rgb(png_ptr); + + + /* Unlike the basic viewer, which was designed to operate on local files, + * this program is intended to simulate a web browser--even though we + * actually read from a local file, too. But because we are pretending + * that most of the images originate on the Internet, we follow the recom- + * mendation of the sRGB proposal and treat unlabelled images (no gAMA + * chunk) as existing in the sRGB color space. That is, we assume that + * such images have a file gamma of 0.45455, which corresponds to a PC-like + * display system. This change in assumptions will have no effect on a + * PC-like system, but on a Mac, SGI, NeXT or other system with a non- + * identity lookup table, it will darken unlabelled images, which effec- + * tively favors images from PC-like systems over those originating on + * the local platform. Note that mainprog_ptr->display_exponent is the + * "gamma" value for the entire display system, i.e., the product of + * LUT_exponent and CRT_exponent. */ + +#ifdef PNG_FLOATING_POINT_SUPPORTED + if (png_get_gAMA(png_ptr, info_ptr, &gamma)) + png_set_gamma(png_ptr, mainprog_ptr->display_exponent, gamma); + else + png_set_gamma(png_ptr, mainprog_ptr->display_exponent, 0.45455); +#else + if (png_get_gAMA_fixed(png_ptr, info_ptr, &gamma)) + png_set_gamma_fixed(png_ptr, + (png_fixed_point)(100000*mainprog_ptr->display_exponent+.5), gamma); + else + png_set_gamma_fixed(png_ptr, + (png_fixed_point)(100000*mainprog_ptr->display_exponent+.5), 45455); +#endif + + /* we'll let libpng expand interlaced images, too */ + + mainprog_ptr->passes = png_set_interlace_handling(png_ptr); + + + /* all transformations have been registered; now update info_ptr data and + * then get rowbytes and channels */ + + png_read_update_info(png_ptr, info_ptr); + + mainprog_ptr->rowbytes = (int)png_get_rowbytes(png_ptr, info_ptr); + mainprog_ptr->channels = png_get_channels(png_ptr, info_ptr); + + + /* Call the main program to allocate memory for the image buffer and + * initialize windows and whatnot. (The old-style function-pointer + * invocation is used for compatibility with a few supposedly ANSI + * compilers that nevertheless barf on "fn_ptr()"-style syntax.) */ + + (*mainprog_ptr->mainprog_init)(); + + + /* and that takes care of initialization */ + + return; +} + + + + + +static void readpng2_row_callback(png_structp png_ptr, png_bytep new_row, + png_uint_32 row_num, int pass) +{ + mainprog_info *mainprog_ptr; + + + /* first check whether the row differs from the previous pass; if not, + * nothing to combine or display */ + + if (!new_row) + return; + + + /* retrieve the pointer to our special-purpose struct so we can access + * the old rows and image-display callback function */ + + mainprog_ptr = png_get_progressive_ptr(png_ptr); + + + /* save the pass number for optional use by the front end */ + + mainprog_ptr->pass = pass; + + + /* have libpng either combine the new row data with the existing row data + * from previous passes (if interlaced) or else just copy the new row + * into the main program's image buffer */ + + png_progressive_combine_row(png_ptr, mainprog_ptr->row_pointers[row_num], + new_row); + + + /* finally, call the display routine in the main program with the number + * of the row we just updated */ + + (*mainprog_ptr->mainprog_display_row)(row_num); + + + /* and we're ready for more */ + + return; +} + + + + + +static void readpng2_end_callback(png_structp png_ptr, png_infop info_ptr) +{ + mainprog_info *mainprog_ptr; + + + /* retrieve the pointer to our special-purpose struct */ + + mainprog_ptr = png_get_progressive_ptr(png_ptr); + + + /* let the main program know that it should flush any buffered image + * data to the display now and set a "done" flag or whatever, but note + * that it SHOULD NOT DESTROY THE PNG STRUCTS YET--in other words, do + * NOT call readpng2_cleanup() either here or in the finish_display() + * routine; wait until control returns to the main program via + * readpng2_decode_data() */ + + (*mainprog_ptr->mainprog_finish_display)(); + + + /* all done */ + + return; +} + + + + + +void readpng2_cleanup(mainprog_info *mainprog_ptr) +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + if (png_ptr && info_ptr) + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + + mainprog_ptr->png_ptr = NULL; + mainprog_ptr->info_ptr = NULL; +} + + + + + +static void readpng2_error_handler(png_structp png_ptr, png_const_charp msg) +{ + mainprog_info *mainprog_ptr; + + /* This function, aside from the extra step of retrieving the "error + * pointer" (below) and the fact that it exists within the application + * rather than within libpng, is essentially identical to libpng's + * default error handler. The second point is critical: since both + * setjmp() and longjmp() are called from the same code, they are + * guaranteed to have compatible notions of how big a jmp_buf is, + * regardless of whether _BSD_SOURCE or anything else has (or has not) + * been defined. */ + + fprintf(stderr, "readpng2 libpng error: %s\n", msg); + fflush(stderr); + + mainprog_ptr = png_get_error_ptr(png_ptr); + if (mainprog_ptr == NULL) { /* we are completely hosed now */ + fprintf(stderr, + "readpng2 severe error: jmpbuf not recoverable; terminating.\n"); + fflush(stderr); + exit(99); + } + + /* Now we have our data structure we can use the information in it + * to return control to our own higher level code (all the points + * where 'setjmp' is called in this file.) This will work with other + * error handling mechanisms as well - libpng always calls png_error + * when it can proceed no further, thus, so long as the error handler + * is intercepted, application code can do its own error recovery. + */ + longjmp(mainprog_ptr->jmpbuf, 1); +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng2.h b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng2.h new file mode 100644 index 000000000..6b3660d7c --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readpng2.h @@ -0,0 +1,116 @@ +/*--------------------------------------------------------------------------- + + rpng2 - progressive-model PNG display program readpng2.h + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#ifndef TRUE +# define TRUE 1 +# define FALSE 0 +#endif + +#ifndef MAX +# define MAX(a,b) ((a) > (b)? (a) : (b)) +# define MIN(a,b) ((a) < (b)? (a) : (b)) +#endif + +#ifdef DEBUG +# define Trace(x) {fprintf x ; fflush(stderr); fflush(stdout);} +#else +# define Trace(x) ; +#endif + +enum rpng2_states { + kPreInit = 0, + kWindowInit, + kDone +}; + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +typedef struct _mainprog_info { + double display_exponent; + ulg width; + ulg height; + void *png_ptr; + void *info_ptr; + void (*mainprog_init)(void); + void (*mainprog_display_row)(ulg row_num); + void (*mainprog_finish_display)(void); + uch *image_data; + uch **row_pointers; + jmp_buf jmpbuf; + int passes; /* not used */ + int pass; + int rowbytes; + int channels; + int need_bgcolor; + int state; + uch bg_red; + uch bg_green; + uch bg_blue; +} mainprog_info; + + +/* prototypes for public functions in readpng2.c */ + +void readpng2_version_info(void); + +int readpng2_check_sig(uch *sig, int num); + +int readpng2_init(mainprog_info *mainprog_ptr); + +int readpng2_decode_data(mainprog_info *mainprog_ptr, uch *rawbuf, ulg length); + +void readpng2_cleanup(mainprog_info *mainprog_ptr); diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readppm.c b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readppm.c new file mode 100644 index 000000000..be9a56d95 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/readppm.c @@ -0,0 +1,179 @@ +/*--------------------------------------------------------------------------- + + rpng - simple PNG display program readppm.c + + --------------------------------------------------------------------------- + + This is a special-purpose replacement for readpng.c that allows binary + PPM files to be used in place of PNG images. + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#include +#include + +#include "readpng.h" /* typedefs, common macros, public prototypes */ + + +ulg width, height; +int bit_depth, color_type, channels; +uch *image_data = NULL; +FILE *saved_infile; + + +void readpng_version_info() +{ + fprintf(stderr, " Compiled without libpng, zlib or PBMPLUS/NetPBM.\n"); +} + + +/* return value = 0 for success, 1 for bad sig, 2 for bad IHDR, 4 for no mem */ + +int readpng_init(FILE *infile, ulg *pWidth, ulg *pHeight) +{ + static uch ppmline[256]; + int maxval; + + + saved_infile = infile; + + fgets(ppmline, 256, infile); + if (ppmline[0] != 'P' || ppmline[1] != '6') { + fprintf(stderr, "ERROR: not a PPM file\n"); + return 1; + } + /* possible color types: P5 = grayscale (0), P6 = RGB (2), P8 = RGBA (6) */ + if (ppmline[1] == '6') { + color_type = 2; + channels = 3; + } else if (ppmline[1] == '8') { + color_type = 6; + channels = 4; + } else /* if (ppmline[1] == '5') */ { + color_type = 0; + channels = 1; + } + + do { + fgets(ppmline, 256, infile); + } while (ppmline[0] == '#'); + sscanf(ppmline, "%lu %lu", &width, &height); + + do { + fgets(ppmline, 256, infile); + } while (ppmline[0] == '#'); + sscanf(ppmline, "%d", &maxval); + if (maxval != 255) { + fprintf(stderr, "ERROR: maxval = %d\n", maxval); + return 2; + } + bit_depth = 8; + + *pWidth = width; + *pHeight = height; + + return 0; +} + + + + +/* returns 0 if succeeds, 1 if fails due to no bKGD chunk, 2 if libpng error; + * scales values to 8-bit if necessary */ + +int readpng_get_bgcolor(uch *red, uch *green, uch *blue) +{ + return 1; +} + + + + +/* display_exponent == LUT_exponent * CRT_exponent */ + +uch *readpng_get_image(double display_exponent, int *pChannels, ulg *pRowbytes) +{ + ulg rowbytes; + + + /* expand palette images to RGB, low-bit-depth grayscale images to 8 bits, + * transparency chunks to full alpha channel; strip 16-bit-per-sample + * images to 8 bits per sample; and convert grayscale to RGB[A] */ + + /* GRR WARNING: grayscale needs to be expanded and channels reset! */ + + *pRowbytes = rowbytes = channels*width; + *pChannels = channels; + + if ((image_data = (uch *)malloc(rowbytes*height)) == NULL) { + return NULL; + } + + Trace((stderr, "readpng_get_image: rowbytes = %ld, height = %ld\n", rowbytes, height)); + + + /* now we can go ahead and just read the whole image */ + + fread(image_data, 1L, rowbytes*height, saved_infile); + + + return image_data; +} + + +void readpng_cleanup(int free_image_data) +{ + if (free_image_data && image_data) { + free(image_data); + image_data = NULL; + } +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng-win.c b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng-win.c new file mode 100644 index 000000000..f53ddc8ec --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng-win.c @@ -0,0 +1,728 @@ +/*--------------------------------------------------------------------------- + + rpng - simple PNG display program rpng-win.c + + This program decodes and displays PNG images, with gamma correction and + optionally with a user-specified background color (in case the image has + transparency). It is very nearly the most basic PNG viewer possible. + This version is for 32-bit Windows; it may compile under 16-bit Windows + with a little tweaking (or maybe not). + + to do: + - handle quoted command-line args (especially filenames with spaces) + - have minimum window width: oh well + - use %.1023s to simplify truncation of title-bar string? + + --------------------------------------------------------------------------- + + Changelog: + - 1.00: initial public release + - 1.01: modified to allow abbreviated options; fixed long/ulong mis- + match; switched to png_jmpbuf() macro + - 1.02: added extra set of parentheses to png_jmpbuf() macro; fixed + command-line parsing bug + - 1.10: enabled "message window"/console (thanks to David Geldreich) + - 2.00: dual-licensed (added GNU GPL) + - 2.01: fixed improper display of usage screen on PNG error(s) + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#define PROGNAME "rpng-win" +#define LONGNAME "Simple PNG Viewer for Windows" +#define VERSION "2.01 of 16 March 2008" + +#include +#include +#include +#include +#include +#ifdef __CYGWIN__ +/* getch replacement. Turns out, we don't really need this, + * but leave it here if we ever enable any of the uses of + * _getch in the main code + */ +#include +#include +#include +int repl_getch( void ) +{ + char ch; + int fd = fileno(stdin); + struct termio old_tty, new_tty; + + ioctl(fd, TCGETA, &old_tty); + new_tty = old_tty; + new_tty.c_lflag &= ~(ICANON | ECHO | ISIG); + ioctl(fd, TCSETA, &new_tty); + fread(&ch, 1, sizeof(ch), stdin); + ioctl(fd, TCSETA, &old_tty); + + return ch; +} +#define _getch repl_getch +#else +#include /* only for _getch() */ +#endif + +/* #define DEBUG : this enables the Trace() macros */ + +#include "readpng.h" /* typedefs, common macros, readpng prototypes */ + + +/* could just include png.h, but this macro is the only thing we need + * (name and typedefs changed to local versions); note that side effects + * only happen with alpha (which could easily be avoided with + * "ush acopy = (alpha);") */ + +#define alpha_composite(composite, fg, alpha, bg) { \ + ush temp = ((ush)(fg)*(ush)(alpha) + \ + (ush)(bg)*(ush)(255 - (ush)(alpha)) + (ush)128); \ + (composite) = (uch)((temp + (temp >> 8)) >> 8); \ +} + + +/* local prototypes */ +static int rpng_win_create_window(HINSTANCE hInst, int showmode); +static int rpng_win_display_image(void); +static void rpng_win_cleanup(void); +LRESULT CALLBACK rpng_win_wndproc(HWND, UINT, WPARAM, LPARAM); + + +static char titlebar[1024]; +static char *progname = PROGNAME; +static char *appname = LONGNAME; +static char *filename; +static FILE *infile; + +static char *bgstr; +static uch bg_red=0, bg_green=0, bg_blue=0; + +static double display_exponent; + +static ulg image_width, image_height, image_rowbytes; +static int image_channels; +static uch *image_data; + +/* Windows-specific variables */ +static ulg wimage_rowbytes; +static uch *dib; +static uch *wimage_data; +static BITMAPINFOHEADER *bmih; + +static HWND global_hwnd; + + + + +int WINAPI WinMain(HINSTANCE hInst, HINSTANCE hPrevInst, PSTR cmd, int showmode) +{ + char *args[1024]; /* arbitrary limit, but should suffice */ + char *p, *q, **argv = args; + int argc = 0; + int rc, alen, flen; + int error = 0; + int have_bg = FALSE; + double LUT_exponent; /* just the lookup table */ + double CRT_exponent = 2.2; /* just the monitor */ + double default_display_exponent; /* whole display system */ + MSG msg; + + + filename = (char *)NULL; + +#ifndef __CYGWIN__ + /* First reenable console output, which normally goes to the bit bucket + * for windowed apps. Closing the console window will terminate the + * app. Thanks to David.Geldreich@realviz.com for supplying the magical + * incantation. */ + + AllocConsole(); + freopen("CONOUT$", "a", stderr); + freopen("CONOUT$", "a", stdout); +#endif + + + /* Next set the default value for our display-system exponent, i.e., + * the product of the CRT exponent and the exponent corresponding to + * the frame-buffer's lookup table (LUT), if any. This is not an + * exhaustive list of LUT values (e.g., OpenStep has a lot of weird + * ones), but it should cover 99% of the current possibilities. And + * yes, these ifdefs are completely wasted in a Windows program... */ + +#if defined(NeXT) + LUT_exponent = 1.0 / 2.2; + /* + if (some_next_function_that_returns_gamma(&next_gamma)) + LUT_exponent = 1.0 / next_gamma; + */ +#elif defined(sgi) + LUT_exponent = 1.0 / 1.7; + /* there doesn't seem to be any documented function to get the + * "gamma" value, so we do it the hard way */ + infile = fopen("/etc/config/system.glGammaVal", "r"); + if (infile) { + double sgi_gamma; + + fgets(tmpline, 80, infile); + fclose(infile); + sgi_gamma = atof(tmpline); + if (sgi_gamma > 0.0) + LUT_exponent = 1.0 / sgi_gamma; + } +#elif defined(Macintosh) + LUT_exponent = 1.8 / 2.61; + /* + if (some_mac_function_that_returns_gamma(&mac_gamma)) + LUT_exponent = mac_gamma / 2.61; + */ +#else + LUT_exponent = 1.0; /* assume no LUT: most PCs */ +#endif + + /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ + default_display_exponent = LUT_exponent * CRT_exponent; + + + /* If the user has set the SCREEN_GAMMA environment variable as suggested + * (somewhat imprecisely) in the libpng documentation, use that; otherwise + * use the default value we just calculated. Either way, the user may + * override this via a command-line option. */ + + if ((p = getenv("SCREEN_GAMMA")) != NULL) + display_exponent = atof(p); + else + display_exponent = default_display_exponent; + + + /* Windows really hates command lines, so we have to set up our own argv. + * Note that we do NOT bother with quoted arguments here, so don't use + * filenames with spaces in 'em! */ + + argv[argc++] = PROGNAME; + p = cmd; + for (;;) { + if (*p == ' ') + while (*++p == ' ') + ; + /* now p points at the first non-space after some spaces */ + if (*p == '\0') + break; /* nothing after the spaces: done */ + argv[argc++] = q = p; + while (*q && *q != ' ') + ++q; + /* now q points at a space or the end of the string */ + if (*q == '\0') + break; /* last argv already terminated; quit */ + *q = '\0'; /* change space to terminator */ + p = q + 1; + } + argv[argc] = NULL; /* terminate the argv array itself */ + + + /* Now parse the command line for options and the PNG filename. */ + + while (*++argv && !error) { + if (!strncmp(*argv, "-gamma", 2)) { + if (!*++argv) + ++error; + else { + display_exponent = atof(*argv); + if (display_exponent <= 0.0) + ++error; + } + } else if (!strncmp(*argv, "-bgcolor", 2)) { + if (!*++argv) + ++error; + else { + bgstr = *argv; + if (strlen(bgstr) != 7 || bgstr[0] != '#') + ++error; + else + have_bg = TRUE; + } + } else { + if (**argv != '-') { + filename = *argv; + if (argv[1]) /* shouldn't be any more args after filename */ + ++error; + } else + ++error; /* not expecting any other options */ + } + } + + if (!filename) + ++error; + + + /* print usage screen if any errors up to this point */ + + if (error) { +#ifndef __CYGWIN__ + int ch; +#endif + + fprintf(stderr, "\n%s %s: %s\n\n", PROGNAME, VERSION, appname); + readpng_version_info(); + fprintf(stderr, "\n" + "Usage: %s [-gamma exp] [-bgcolor bg] file.png\n" + " exp \ttransfer-function exponent (``gamma'') of the display\n" + "\t\t system in floating-point format (e.g., ``%.1f''); equal\n" + "\t\t to the product of the lookup-table exponent (varies)\n" + "\t\t and the CRT exponent (usually 2.2); must be positive\n" + " bg \tdesired background color in 7-character hex RGB format\n" + "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" + "\t\t used with transparent images\n" + "\nPress Q, Esc or mouse button 1 after image is displayed to quit.\n" +#ifndef __CYGWIN__ + "Press Q or Esc to quit this usage screen.\n" +#endif + "\n", PROGNAME, default_display_exponent); +#ifndef __CYGWIN__ + do + ch = _getch(); + while (ch != 'q' && ch != 'Q' && ch != 0x1B); +#endif + exit(1); + } + + + if (!(infile = fopen(filename, "rb"))) { + fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); + ++error; + } else { + if ((rc = readpng_init(infile, &image_width, &image_height)) != 0) { + switch (rc) { + case 1: + fprintf(stderr, PROGNAME + ": [%s] is not a PNG file: incorrect signature\n", + filename); + break; + case 2: + fprintf(stderr, PROGNAME + ": [%s] has bad IHDR (libpng longjmp)\n", filename); + break; + case 4: + fprintf(stderr, PROGNAME ": insufficient memory\n"); + break; + default: + fprintf(stderr, PROGNAME + ": unknown readpng_init() error\n"); + break; + } + ++error; + } + if (error) + fclose(infile); + } + + + if (error) { +#ifndef __CYGWIN__ + int ch; +#endif + + fprintf(stderr, PROGNAME ": aborting.\n"); +#ifndef __CYGWIN__ + do + ch = _getch(); + while (ch != 'q' && ch != 'Q' && ch != 0x1B); +#endif + exit(2); + } else { + fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, appname); +#ifndef __CYGWIN__ + fprintf(stderr, + "\n [console window: closing this window will terminate %s]\n\n", + PROGNAME); +#endif + } + + + /* set the title-bar string, but make sure buffer doesn't overflow */ + + alen = strlen(appname); + flen = strlen(filename); + if (alen + flen + 3 > 1023) + sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); + else + sprintf(titlebar, "%s: %s", appname, filename); + + + /* if the user didn't specify a background color on the command line, + * check for one in the PNG file--if not, the initialized values of 0 + * (black) will be used */ + + if (have_bg) { + unsigned r, g, b; /* this approach quiets compiler warnings */ + + sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); + bg_red = (uch)r; + bg_green = (uch)g; + bg_blue = (uch)b; + } else if (readpng_get_bgcolor(&bg_red, &bg_green, &bg_blue) > 1) { + readpng_cleanup(TRUE); + fprintf(stderr, PROGNAME + ": libpng error while checking for background color\n"); + exit(2); + } + + + /* do the basic Windows initialization stuff, make the window and fill it + * with the background color */ + + if (rpng_win_create_window(hInst, showmode)) + exit(2); + + + /* decode the image, all at once */ + + Trace((stderr, "calling readpng_get_image()\n")) + image_data = readpng_get_image(display_exponent, &image_channels, + &image_rowbytes); + Trace((stderr, "done with readpng_get_image()\n")) + + + /* done with PNG file, so clean up to minimize memory usage (but do NOT + * nuke image_data!) */ + + readpng_cleanup(FALSE); + fclose(infile); + + if (!image_data) { + fprintf(stderr, PROGNAME ": unable to decode PNG image\n"); + exit(3); + } + + + /* display image (composite with background if requested) */ + + Trace((stderr, "calling rpng_win_display_image()\n")) + if (rpng_win_display_image()) { + free(image_data); + exit(4); + } + Trace((stderr, "done with rpng_win_display_image()\n")) + + + /* wait for the user to tell us when to quit */ + + printf( +#ifndef __CYGWIN__ + "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n" +#else + "Done. Press mouse button 1 (within image window) to quit.\n" +#endif + ); + fflush(stdout); + + while (GetMessage(&msg, NULL, 0, 0)) { + TranslateMessage(&msg); + DispatchMessage(&msg); + } + + + /* OK, we're done: clean up all image and Windows resources and go away */ + + rpng_win_cleanup(); + + return msg.wParam; +} + + + + + +static int rpng_win_create_window(HINSTANCE hInst, int showmode) +{ + uch *dest; + int extra_width, extra_height; + ulg i, j; + WNDCLASSEX wndclass; + + +/*--------------------------------------------------------------------------- + Allocate memory for the display-specific version of the image (round up + to multiple of 4 for Windows DIB). + ---------------------------------------------------------------------------*/ + + wimage_rowbytes = ((3*image_width + 3L) >> 2) << 2; + + if (!(dib = (uch *)malloc(sizeof(BITMAPINFOHEADER) + + wimage_rowbytes*image_height))) + { + return 4; /* fail */ + } + +/*--------------------------------------------------------------------------- + Initialize the DIB. Negative height means to use top-down BMP ordering + (must be uncompressed, but that's what we want). Bit count of 1, 4 or 8 + implies a colormap of RGBX quads, but 24-bit BMPs just use B,G,R values + directly => wimage_data begins immediately after BMP header. + ---------------------------------------------------------------------------*/ + + memset(dib, 0, sizeof(BITMAPINFOHEADER)); + bmih = (BITMAPINFOHEADER *)dib; + bmih->biSize = sizeof(BITMAPINFOHEADER); + bmih->biWidth = image_width; + bmih->biHeight = -((long)image_height); + bmih->biPlanes = 1; + bmih->biBitCount = 24; + bmih->biCompression = 0; + wimage_data = dib + sizeof(BITMAPINFOHEADER); + +/*--------------------------------------------------------------------------- + Fill in background color (black by default); data are in BGR order. + ---------------------------------------------------------------------------*/ + + for (j = 0; j < image_height; ++j) { + dest = wimage_data + j*wimage_rowbytes; + for (i = image_width; i > 0; --i) { + *dest++ = bg_blue; + *dest++ = bg_green; + *dest++ = bg_red; + } + } + +/*--------------------------------------------------------------------------- + Set the window parameters. + ---------------------------------------------------------------------------*/ + + memset(&wndclass, 0, sizeof(wndclass)); + + wndclass.cbSize = sizeof(wndclass); + wndclass.style = CS_HREDRAW | CS_VREDRAW; + wndclass.lpfnWndProc = rpng_win_wndproc; + wndclass.hInstance = hInst; + wndclass.hIcon = LoadIcon(NULL, IDI_APPLICATION); + wndclass.hCursor = LoadCursor(NULL, IDC_ARROW); + wndclass.hbrBackground = (HBRUSH)GetStockObject(DKGRAY_BRUSH); + wndclass.lpszMenuName = NULL; + wndclass.lpszClassName = progname; + wndclass.hIconSm = LoadIcon(NULL, IDI_APPLICATION); + + RegisterClassEx(&wndclass); + +/*--------------------------------------------------------------------------- + Finally, create the window. + ---------------------------------------------------------------------------*/ + + extra_width = 2*(GetSystemMetrics(SM_CXBORDER) + + GetSystemMetrics(SM_CXDLGFRAME)); + extra_height = 2*(GetSystemMetrics(SM_CYBORDER) + + GetSystemMetrics(SM_CYDLGFRAME)) + + GetSystemMetrics(SM_CYCAPTION); + + global_hwnd = CreateWindow(progname, titlebar, WS_OVERLAPPEDWINDOW, + CW_USEDEFAULT, CW_USEDEFAULT, image_width+extra_width, + image_height+extra_height, NULL, NULL, hInst, NULL); + + ShowWindow(global_hwnd, showmode); + UpdateWindow(global_hwnd); + + return 0; + +} /* end function rpng_win_create_window() */ + + + + + +static int rpng_win_display_image() +{ + uch *src, *dest; + uch r, g, b, a; + ulg i, row, lastrow; + RECT rect; + + + Trace((stderr, "beginning display loop (image_channels == %d)\n", + image_channels)) + Trace((stderr, "(width = %ld, rowbytes = %ld, wimage_rowbytes = %d)\n", + image_width, image_rowbytes, wimage_rowbytes)) + + +/*--------------------------------------------------------------------------- + Blast image data to buffer. This whole routine takes place before the + message loop begins, so there's no real point in any pseudo-progressive + display... + ---------------------------------------------------------------------------*/ + + for (lastrow = row = 0; row < image_height; ++row) { + src = image_data + row*image_rowbytes; + dest = wimage_data + row*wimage_rowbytes; + if (image_channels == 3) { + for (i = image_width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + *dest++ = b; + *dest++ = g; /* note reverse order */ + *dest++ = r; + } + } else /* if (image_channels == 4) */ { + for (i = image_width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (a == 255) { + *dest++ = b; + *dest++ = g; + *dest++ = r; + } else if (a == 0) { + *dest++ = bg_blue; + *dest++ = bg_green; + *dest++ = bg_red; + } else { + /* this macro (copied from png.h) composites the + * foreground and background values and puts the + * result into the first argument; there are no + * side effects with the first argument */ + alpha_composite(*dest++, b, a, bg_blue); + alpha_composite(*dest++, g, a, bg_green); + alpha_composite(*dest++, r, a, bg_red); + } + } + } + /* display after every 16 lines */ + if (((row+1) & 0xf) == 0) { + rect.left = 0L; + rect.top = (LONG)lastrow; + rect.right = (LONG)image_width; /* possibly off by one? */ + rect.bottom = (LONG)lastrow + 16L; /* possibly off by one? */ + InvalidateRect(global_hwnd, &rect, FALSE); + UpdateWindow(global_hwnd); /* similar to XFlush() */ + lastrow = row + 1; + } + } + + Trace((stderr, "calling final image-flush routine\n")) + if (lastrow < image_height) { + rect.left = 0L; + rect.top = (LONG)lastrow; + rect.right = (LONG)image_width; /* possibly off by one? */ + rect.bottom = (LONG)image_height; /* possibly off by one? */ + InvalidateRect(global_hwnd, &rect, FALSE); + UpdateWindow(global_hwnd); /* similar to XFlush() */ + } + +/* + last param determines whether or not background is wiped before paint + InvalidateRect(global_hwnd, NULL, TRUE); + UpdateWindow(global_hwnd); + */ + + return 0; +} + + + + + +static void rpng_win_cleanup() +{ + if (image_data) { + free(image_data); + image_data = NULL; + } + + if (dib) { + free(dib); + dib = NULL; + } +} + + + + + +LRESULT CALLBACK rpng_win_wndproc(HWND hwnd, UINT iMsg, WPARAM wP, LPARAM lP) +{ + HDC hdc; + PAINTSTRUCT ps; + int rc; + + switch (iMsg) { + case WM_CREATE: + /* one-time processing here, if any */ + return 0; + + case WM_PAINT: + hdc = BeginPaint(hwnd, &ps); + /* dest */ + rc = StretchDIBits(hdc, 0, 0, image_width, image_height, + /* source */ + 0, 0, image_width, image_height, + wimage_data, (BITMAPINFO *)bmih, + /* iUsage: no clue */ + 0, SRCCOPY); + EndPaint(hwnd, &ps); + return 0; + + /* wait for the user to tell us when to quit */ + case WM_CHAR: + switch (wP) { /* only need one, so ignore repeat count */ + case 'q': + case 'Q': + case 0x1B: /* Esc key */ + PostQuitMessage(0); + } + return 0; + + case WM_LBUTTONDOWN: /* another way of quitting */ + case WM_DESTROY: + PostQuitMessage(0); + return 0; + } + + return DefWindowProc(hwnd, iMsg, wP, lP); +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng-x.c b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng-x.c new file mode 100644 index 000000000..6d10e1b84 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng-x.c @@ -0,0 +1,904 @@ +/*--------------------------------------------------------------------------- + + rpng - simple PNG display program rpng-x.c + + This program decodes and displays PNG images, with gamma correction and + optionally with a user-specified background color (in case the image has + transparency). It is very nearly the most basic PNG viewer possible. + This version is for the X Window System (tested by author under Unix and + by Martin Zinser under OpenVMS; may work under OS/2 with some tweaking). + + to do: + - 8-bit (colormapped) X support + - use %.1023s to simplify truncation of title-bar string? + + --------------------------------------------------------------------------- + + Changelog: + - 1.01: initial public release + - 1.02: modified to allow abbreviated options; fixed long/ulong mis- + match; switched to png_jmpbuf() macro + - 1.10: added support for non-default visuals; fixed X pixel-conversion + - 1.11: added extra set of parentheses to png_jmpbuf() macro; fixed + command-line parsing bug + - 1.12: fixed some small X memory leaks (thanks to François Petitjean) + - 1.13: fixed XFreeGC() crash bug (thanks to Patrick Welche) + - 1.14: added support for X resources (thanks to Gerhard Niklasch) + - 2.00: dual-licensed (added GNU GPL) + - 2.01: fixed improper display of usage screen on PNG error(s) + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#define PROGNAME "rpng-x" +#define LONGNAME "Simple PNG Viewer for X" +#define VERSION "2.01 of 16 March 2008" +#define RESNAME "rpng" /* our X resource application name */ +#define RESCLASS "Rpng" /* our X resource class name */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* #define DEBUG : this enables the Trace() macros */ + +#include "readpng.h" /* typedefs, common macros, readpng prototypes */ + + +/* could just include png.h, but this macro is the only thing we need + * (name and typedefs changed to local versions); note that side effects + * only happen with alpha (which could easily be avoided with + * "ush acopy = (alpha);") */ + +#define alpha_composite(composite, fg, alpha, bg) { \ + ush temp = ((ush)(fg)*(ush)(alpha) + \ + (ush)(bg)*(ush)(255 - (ush)(alpha)) + (ush)128); \ + (composite) = (uch)((temp + (temp >> 8)) >> 8); \ +} + + +/* local prototypes */ +static int rpng_x_create_window(void); +static int rpng_x_display_image(void); +static void rpng_x_cleanup(void); +static int rpng_x_msb(ulg u32val); + + +static char titlebar[1024], *window_name = titlebar; +static char *appname = LONGNAME; +static char *icon_name = PROGNAME; +static char *res_name = RESNAME; +static char *res_class = RESCLASS; +static char *filename; +static FILE *infile; + +static char *bgstr; +static uch bg_red=0, bg_green=0, bg_blue=0; + +static double display_exponent; + +static ulg image_width, image_height, image_rowbytes; +static int image_channels; +static uch *image_data; + +/* X-specific variables */ +static char *displayname; +static XImage *ximage; +static Display *display; +static int depth; +static Visual *visual; +static XVisualInfo *visual_list; +static int RShift, GShift, BShift; +static ulg RMask, GMask, BMask; +static Window window; +static GC gc; +static Colormap colormap; + +static int have_nondefault_visual = FALSE; +static int have_colormap = FALSE; +static int have_window = FALSE; +static int have_gc = FALSE; +/* +ulg numcolors=0, pixels[256]; +ush reds[256], greens[256], blues[256]; + */ + + + + +int main(int argc, char **argv) +{ +#ifdef sgi + char tmpline[80]; +#endif + char *p; + int rc, alen, flen; + int error = 0; + int have_bg = FALSE; + double LUT_exponent; /* just the lookup table */ + double CRT_exponent = 2.2; /* just the monitor */ + double default_display_exponent; /* whole display system */ + XEvent e; + KeySym k; + + + displayname = (char *)NULL; + filename = (char *)NULL; + + + /* First set the default value for our display-system exponent, i.e., + * the product of the CRT exponent and the exponent corresponding to + * the frame-buffer's lookup table (LUT), if any. This is not an + * exhaustive list of LUT values (e.g., OpenStep has a lot of weird + * ones), but it should cover 99% of the current possibilities. */ + +#if defined(NeXT) + LUT_exponent = 1.0 / 2.2; + /* + if (some_next_function_that_returns_gamma(&next_gamma)) + LUT_exponent = 1.0 / next_gamma; + */ +#elif defined(sgi) + LUT_exponent = 1.0 / 1.7; + /* there doesn't seem to be any documented function to get the + * "gamma" value, so we do it the hard way */ + infile = fopen("/etc/config/system.glGammaVal", "r"); + if (infile) { + double sgi_gamma; + + fgets(tmpline, 80, infile); + fclose(infile); + sgi_gamma = atof(tmpline); + if (sgi_gamma > 0.0) + LUT_exponent = 1.0 / sgi_gamma; + } +#elif defined(Macintosh) + LUT_exponent = 1.8 / 2.61; + /* + if (some_mac_function_that_returns_gamma(&mac_gamma)) + LUT_exponent = mac_gamma / 2.61; + */ +#else + LUT_exponent = 1.0; /* assume no LUT: most PCs */ +#endif + + /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ + default_display_exponent = LUT_exponent * CRT_exponent; + + + /* If the user has set the SCREEN_GAMMA environment variable as suggested + * (somewhat imprecisely) in the libpng documentation, use that; otherwise + * use the default value we just calculated. Either way, the user may + * override this via a command-line option. */ + + if ((p = getenv("SCREEN_GAMMA")) != NULL) + display_exponent = atof(p); + else + display_exponent = default_display_exponent; + + + /* Now parse the command line for options and the PNG filename. */ + + while (*++argv && !error) { + if (!strncmp(*argv, "-display", 2)) { + if (!*++argv) + ++error; + else + displayname = *argv; + } else if (!strncmp(*argv, "-gamma", 2)) { + if (!*++argv) + ++error; + else { + display_exponent = atof(*argv); + if (display_exponent <= 0.0) + ++error; + } + } else if (!strncmp(*argv, "-bgcolor", 2)) { + if (!*++argv) + ++error; + else { + bgstr = *argv; + if (strlen(bgstr) != 7 || bgstr[0] != '#') + ++error; + else + have_bg = TRUE; + } + } else { + if (**argv != '-') { + filename = *argv; + if (argv[1]) /* shouldn't be any more args after filename */ + ++error; + } else + ++error; /* not expecting any other options */ + } + } + + if (!filename) + ++error; + + + /* print usage screen if any errors up to this point */ + + if (error) { + fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, appname); + readpng_version_info(); + fprintf(stderr, "\n" + "Usage: %s [-display xdpy] [-gamma exp] [-bgcolor bg] file.png\n" + " xdpy\tname of the target X display (e.g., ``hostname:0'')\n" + " exp \ttransfer-function exponent (``gamma'') of the display\n" + "\t\t system in floating-point format (e.g., ``%.1f''); equal\n" + "\t\t to the product of the lookup-table exponent (varies)\n" + "\t\t and the CRT exponent (usually 2.2); must be positive\n" + " bg \tdesired background color in 7-character hex RGB format\n" + "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" + "\t\t used with transparent images\n" + "\nPress Q, Esc or mouse button 1 (within image window, after image\n" + "is displayed) to quit.\n" + "\n", PROGNAME, default_display_exponent); + exit(1); + } + + + if (!(infile = fopen(filename, "rb"))) { + fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); + ++error; + } else { + if ((rc = readpng_init(infile, &image_width, &image_height)) != 0) { + switch (rc) { + case 1: + fprintf(stderr, PROGNAME + ": [%s] is not a PNG file: incorrect signature\n", + filename); + break; + case 2: + fprintf(stderr, PROGNAME + ": [%s] has bad IHDR (libpng longjmp)\n", filename); + break; + case 4: + fprintf(stderr, PROGNAME ": insufficient memory\n"); + break; + default: + fprintf(stderr, PROGNAME + ": unknown readpng_init() error\n"); + break; + } + ++error; + } else { + display = XOpenDisplay(displayname); + if (!display) { + readpng_cleanup(TRUE); + fprintf(stderr, PROGNAME ": can't open X display [%s]\n", + displayname? displayname : "default"); + ++error; + } + } + if (error) + fclose(infile); + } + + + if (error) { + fprintf(stderr, PROGNAME ": aborting.\n"); + exit(2); + } + + + /* set the title-bar string, but make sure buffer doesn't overflow */ + + alen = strlen(appname); + flen = strlen(filename); + if (alen + flen + 3 > 1023) + sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); + else + sprintf(titlebar, "%s: %s", appname, filename); + + + /* if the user didn't specify a background color on the command line, + * check for one in the PNG file--if not, the initialized values of 0 + * (black) will be used */ + + if (have_bg) { + unsigned r, g, b; /* this approach quiets compiler warnings */ + + sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); + bg_red = (uch)r; + bg_green = (uch)g; + bg_blue = (uch)b; + } else if (readpng_get_bgcolor(&bg_red, &bg_green, &bg_blue) > 1) { + readpng_cleanup(TRUE); + fprintf(stderr, PROGNAME + ": libpng error while checking for background color\n"); + exit(2); + } + + + /* do the basic X initialization stuff, make the window and fill it + * with the background color */ + + if (rpng_x_create_window()) + exit(2); + + + /* decode the image, all at once */ + + Trace((stderr, "calling readpng_get_image()\n")) + image_data = readpng_get_image(display_exponent, &image_channels, + &image_rowbytes); + Trace((stderr, "done with readpng_get_image()\n")) + + + /* done with PNG file, so clean up to minimize memory usage (but do NOT + * nuke image_data!) */ + + readpng_cleanup(FALSE); + fclose(infile); + + if (!image_data) { + fprintf(stderr, PROGNAME ": unable to decode PNG image\n"); + exit(3); + } + + + /* display image (composite with background if requested) */ + + Trace((stderr, "calling rpng_x_display_image()\n")) + if (rpng_x_display_image()) { + free(image_data); + exit(4); + } + Trace((stderr, "done with rpng_x_display_image()\n")) + + + /* wait for the user to tell us when to quit */ + + printf( + "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n"); + fflush(stdout); + + do + XNextEvent(display, &e); + while (!(e.type == ButtonPress && e.xbutton.button == Button1) && + !(e.type == KeyPress && /* v--- or 1 for shifted keys */ + ((k = XLookupKeysym(&e.xkey, 0)) == XK_q || k == XK_Escape) )); + + + /* OK, we're done: clean up all image and X resources and go away */ + + rpng_x_cleanup(); + + return 0; +} + + + + + +static int rpng_x_create_window(void) +{ + uch *xdata; + int need_colormap = FALSE; + int screen, pad; + ulg bg_pixel = 0L; + ulg attrmask; + Window root; + XEvent e; + XGCValues gcvalues; + XSetWindowAttributes attr; + XTextProperty windowName, *pWindowName = &windowName; + XTextProperty iconName, *pIconName = &iconName; + XVisualInfo visual_info; + XSizeHints *size_hints; + XWMHints *wm_hints; + XClassHint *class_hints; + + + screen = DefaultScreen(display); + depth = DisplayPlanes(display, screen); + root = RootWindow(display, screen); + +#ifdef DEBUG + XSynchronize(display, True); +#endif + +#if 0 +/* GRR: add 8-bit support */ + if (/* depth != 8 && */ depth != 16 && depth != 24 && depth != 32) { + fprintf(stderr, + "screen depth %d not supported (only 16-, 24- or 32-bit TrueColor)\n", + depth); + return 2; + } + + XMatchVisualInfo(display, screen, depth, + (depth == 8)? PseudoColor : TrueColor, &visual_info); + visual = visual_info.visual; +#else + if (depth != 16 && depth != 24 && depth != 32) { + int visuals_matched = 0; + + Trace((stderr, "default depth is %d: checking other visuals\n", + depth)) + + /* 24-bit first */ + visual_info.screen = screen; + visual_info.depth = 24; + visual_list = XGetVisualInfo(display, + VisualScreenMask | VisualDepthMask, &visual_info, &visuals_matched); + if (visuals_matched == 0) { +/* GRR: add 15-, 16- and 32-bit TrueColor visuals (also DirectColor?) */ + fprintf(stderr, "default screen depth %d not supported, and no" + " 24-bit visuals found\n", depth); + return 2; + } + Trace((stderr, "XGetVisualInfo() returned %d 24-bit visuals\n", + visuals_matched)) + visual = visual_list[0].visual; + depth = visual_list[0].depth; +/* + colormap_size = visual_list[0].colormap_size; + visual_class = visual->class; + visualID = XVisualIDFromVisual(visual); + */ + have_nondefault_visual = TRUE; + need_colormap = TRUE; + } else { + XMatchVisualInfo(display, screen, depth, TrueColor, &visual_info); + visual = visual_info.visual; + } +#endif + + RMask = visual->red_mask; + GMask = visual->green_mask; + BMask = visual->blue_mask; + +/* GRR: add/check 8-bit support */ + if (depth == 8 || need_colormap) { + colormap = XCreateColormap(display, root, visual, AllocNone); + if (!colormap) { + fprintf(stderr, "XCreateColormap() failed\n"); + return 2; + } + have_colormap = TRUE; + } + if (depth == 15 || depth == 16) { + RShift = 15 - rpng_x_msb(RMask); /* these are right-shifts */ + GShift = 15 - rpng_x_msb(GMask); + BShift = 15 - rpng_x_msb(BMask); + } else if (depth > 16) { +#define NO_24BIT_MASKS +#ifdef NO_24BIT_MASKS + RShift = rpng_x_msb(RMask) - 7; /* these are left-shifts */ + GShift = rpng_x_msb(GMask) - 7; + BShift = rpng_x_msb(BMask) - 7; +#else + RShift = 7 - rpng_x_msb(RMask); /* these are right-shifts, too */ + GShift = 7 - rpng_x_msb(GMask); + BShift = 7 - rpng_x_msb(BMask); +#endif + } + if (depth >= 15 && (RShift < 0 || GShift < 0 || BShift < 0)) { + fprintf(stderr, "rpng internal logic error: negative X shift(s)!\n"); + return 2; + } + +/*--------------------------------------------------------------------------- + Finally, create the window. + ---------------------------------------------------------------------------*/ + + attr.backing_store = Always; + attr.event_mask = ExposureMask | KeyPressMask | ButtonPressMask; + attrmask = CWBackingStore | CWEventMask; + if (have_nondefault_visual) { + attr.colormap = colormap; + attr.background_pixel = 0; + attr.border_pixel = 1; + attrmask |= CWColormap | CWBackPixel | CWBorderPixel; + } + + window = XCreateWindow(display, root, 0, 0, image_width, image_height, 0, + depth, InputOutput, visual, attrmask, &attr); + + if (window == None) { + fprintf(stderr, "XCreateWindow() failed\n"); + return 2; + } else + have_window = TRUE; + + if (depth == 8) + XSetWindowColormap(display, window, colormap); + + if (!XStringListToTextProperty(&window_name, 1, pWindowName)) + pWindowName = NULL; + if (!XStringListToTextProperty(&icon_name, 1, pIconName)) + pIconName = NULL; + + /* OK if any hints allocation fails; XSetWMProperties() allows NULLs */ + + if ((size_hints = XAllocSizeHints()) != NULL) { + /* window will not be resizable */ + size_hints->flags = PMinSize | PMaxSize; + size_hints->min_width = size_hints->max_width = (int)image_width; + size_hints->min_height = size_hints->max_height = (int)image_height; + } + + if ((wm_hints = XAllocWMHints()) != NULL) { + wm_hints->initial_state = NormalState; + wm_hints->input = True; + /* wm_hints->icon_pixmap = icon_pixmap; */ + wm_hints->flags = StateHint | InputHint /* | IconPixmapHint */ ; + } + + if ((class_hints = XAllocClassHint()) != NULL) { + class_hints->res_name = res_name; + class_hints->res_class = res_class; + } + + XSetWMProperties(display, window, pWindowName, pIconName, NULL, 0, + size_hints, wm_hints, class_hints); + + /* various properties and hints no longer needed; free memory */ + if (pWindowName) + XFree(pWindowName->value); + if (pIconName) + XFree(pIconName->value); + if (size_hints) + XFree(size_hints); + if (wm_hints) + XFree(wm_hints); + if (class_hints) + XFree(class_hints); + + XMapWindow(display, window); + + gc = XCreateGC(display, window, 0, &gcvalues); + have_gc = TRUE; + +/*--------------------------------------------------------------------------- + Fill window with the specified background color. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + bg_pixel = ((ulg)bg_red << RShift) | + ((ulg)bg_green << GShift) | + ((ulg)bg_blue << BShift); + } else if (depth == 16) { + bg_pixel = ((((ulg)bg_red << 8) >> RShift) & RMask) | + ((((ulg)bg_green << 8) >> GShift) & GMask) | + ((((ulg)bg_blue << 8) >> BShift) & BMask); + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + + XSetForeground(display, gc, bg_pixel); + XFillRectangle(display, window, gc, 0, 0, image_width, image_height); + +/*--------------------------------------------------------------------------- + Wait for first Expose event to do any drawing, then flush. + ---------------------------------------------------------------------------*/ + + do + XNextEvent(display, &e); + while (e.type != Expose || e.xexpose.count); + + XFlush(display); + +/*--------------------------------------------------------------------------- + Allocate memory for the X- and display-specific version of the image. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + xdata = (uch *)malloc(4*image_width*image_height); + pad = 32; + } else if (depth == 16) { + xdata = (uch *)malloc(2*image_width*image_height); + pad = 16; + } else /* depth == 8 */ { + xdata = (uch *)malloc(image_width*image_height); + pad = 8; + } + + if (!xdata) { + fprintf(stderr, PROGNAME ": unable to allocate image memory\n"); + return 4; + } + + ximage = XCreateImage(display, visual, depth, ZPixmap, 0, + (char *)xdata, image_width, image_height, pad, 0); + + if (!ximage) { + fprintf(stderr, PROGNAME ": XCreateImage() failed\n"); + free(xdata); + return 3; + } + + /* to avoid testing the byte order every pixel (or doubling the size of + * the drawing routine with a giant if-test), we arbitrarily set the byte + * order to MSBFirst and let Xlib worry about inverting things on little- + * endian machines (like Linux/x86, old VAXen, etc.)--this is not the most + * efficient approach (the giant if-test would be better), but in the + * interest of clarity, we take the easy way out... */ + + ximage->byte_order = MSBFirst; + + return 0; + +} /* end function rpng_x_create_window() */ + + + + + +static int rpng_x_display_image(void) +{ + uch *src; + char *dest; + uch r, g, b, a; + ulg i, row, lastrow = 0; + ulg pixel; + int ximage_rowbytes = ximage->bytes_per_line; +/* int bpp = ximage->bits_per_pixel; */ + + + Trace((stderr, "beginning display loop (image_channels == %d)\n", + image_channels)) + Trace((stderr, " (width = %ld, rowbytes = %ld, ximage_rowbytes = %d)\n", + image_width, image_rowbytes, ximage_rowbytes)) + Trace((stderr, " (bpp = %d)\n", ximage->bits_per_pixel)) + Trace((stderr, " (byte_order = %s)\n", ximage->byte_order == MSBFirst? + "MSBFirst" : (ximage->byte_order == LSBFirst? "LSBFirst" : "unknown"))) + + if (depth == 24 || depth == 32) { + ulg red, green, blue; + + for (lastrow = row = 0; row < image_height; ++row) { + src = image_data + row*image_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (image_channels == 3) { + for (i = image_width; i > 0; --i) { + red = *src++; + green = *src++; + blue = *src++; +#ifdef NO_24BIT_MASKS + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + /* GRR BUG: this assumes bpp == 32, but may be 24: */ + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); +#else + red = (RShift < 0)? red << (-RShift) : red >> RShift; + green = (GShift < 0)? green << (-GShift) : green >> GShift; + blue = (BShift < 0)? blue << (-BShift) : blue >> BShift; + pixel = (red & RMask) | (green & GMask) | (blue & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); +#endif + } + } else /* if (image_channels == 4) */ { + for (i = image_width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (a == 255) { + red = r; + green = g; + blue = b; + } else if (a == 0) { + red = bg_red; + green = bg_green; + blue = bg_blue; + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result into the + * first argument */ + alpha_composite(red, r, a, bg_red); + alpha_composite(green, g, a, bg_green); + alpha_composite(blue, b, a, bg_blue); + } + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + /* display after every 16 lines */ + if (((row+1) & 0xf) == 0) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, image_width, 16); + XFlush(display); + lastrow = row + 1; + } + } + + } else if (depth == 16) { + ush red, green, blue; + + for (lastrow = row = 0; row < image_height; ++row) { + src = image_data + row*image_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (image_channels == 3) { + for (i = image_width; i > 0; --i) { + red = ((ush)(*src) << 8); + ++src; + green = ((ush)(*src) << 8); + ++src; + blue = ((ush)(*src) << 8); + ++src; + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } else /* if (image_channels == 4) */ { + for (i = image_width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (a == 255) { + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } else if (a == 0) { + red = ((ush)bg_red << 8); + green = ((ush)bg_green << 8); + blue = ((ush)bg_blue << 8); + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result back into + * the first argument (== fg byte here: safe) */ + alpha_composite(r, r, a, bg_red); + alpha_composite(g, g, a, bg_green); + alpha_composite(b, b, a, bg_blue); + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + /* display after every 16 lines */ + if (((row+1) & 0xf) == 0) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, image_width, 16); + XFlush(display); + lastrow = row + 1; + } + } + + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + + Trace((stderr, "calling final XPutImage()\n")) + if (lastrow < image_height) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, image_width, image_height-lastrow); + XFlush(display); + } + + return 0; +} + + + + +static void rpng_x_cleanup(void) +{ + if (image_data) { + free(image_data); + image_data = NULL; + } + + if (ximage) { + if (ximage->data) { + free(ximage->data); /* we allocated it, so we free it */ + ximage->data = (char *)NULL; /* instead of XDestroyImage() */ + } + XDestroyImage(ximage); + ximage = NULL; + } + + if (have_gc) + XFreeGC(display, gc); + + if (have_window) + XDestroyWindow(display, window); + + if (have_colormap) + XFreeColormap(display, colormap); + + if (have_nondefault_visual) + XFree(visual_list); +} + + + + + +static int rpng_x_msb(ulg u32val) +{ + int i; + + for (i = 31; i >= 0; --i) { + if (u32val & 0x80000000L) + break; + u32val <<= 1; + } + return i; +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng2-win.c b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng2-win.c new file mode 100644 index 000000000..223e73740 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng2-win.c @@ -0,0 +1,1253 @@ +/*--------------------------------------------------------------------------- + + rpng2 - progressive-model PNG display program rpng2-win.c + + This program decodes and displays PNG files progressively, as if it were + a web browser (though the front end is only set up to read from files). + It supports gamma correction, user-specified background colors, and user- + specified background patterns (for transparent images). This version is + for 32-bit Windows; it may compile under 16-bit Windows with a little + tweaking (or maybe not). Thanks to Adam Costello and Pieter S. van der + Meulen for the "diamond" and "radial waves" patterns, respectively. + + to do (someday, maybe): + - handle quoted command-line args (especially filenames with spaces) + - finish resizable checkerboard-gradient (sizes 4-128?) + - use %.1023s to simplify truncation of title-bar string? + - have minimum window width: oh well + + --------------------------------------------------------------------------- + + Changelog: + - 1.01: initial public release + - 1.02: fixed cut-and-paste error in usage screen (oops...) + - 1.03: modified to allow abbreviated options + - 1.04: removed bogus extra argument from usage fprintf() [Glenn R-P?]; + fixed command-line parsing bug + - 1.10: enabled "message window"/console (thanks to David Geldreich) + - 1.20: added runtime MMX-enabling/disabling and new -mmx* options + - 1.21: made minor tweak to usage screen to fit within 25-line console + - 1.22: added AMD64/EM64T support (__x86_64__) + - 2.00: dual-licensed (added GNU GPL) + - 2.01: fixed 64-bit typo in readpng2.c + - 2.02: fixed improper display of usage screen on PNG error(s); fixed + unexpected-EOF and file-read-error cases + - 2.03: removed runtime MMX-enabling/disabling and obsolete -mmx* options + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#define PROGNAME "rpng2-win" +#define LONGNAME "Progressive PNG Viewer for Windows" +#define VERSION "2.02 of 16 March 2008" + +#include +#include +#include +#include /* for jmpbuf declaration in readpng2.h */ +#include +#include /* only for PvdM background code */ +#include +#ifdef __CYGWIN__ +/* getch replacement. Turns out, we don't really need this, + * but leave it here if we ever enable any of the uses of + * _getch in the main code + */ +#include +#include +#include +int repl_getch( void ) +{ + char ch; + int fd = fileno(stdin); + struct termio old_tty, new_tty; + + ioctl(fd, TCGETA, &old_tty); + new_tty = old_tty; + new_tty.c_lflag &= ~(ICANON | ECHO | ISIG); + ioctl(fd, TCSETA, &new_tty); + fread(&ch, 1, sizeof(ch), stdin); + ioctl(fd, TCSETA, &old_tty); + + return ch; +} +#define _getch repl_getch +#else +#include /* only for _getch() */ +#endif + +/* all for PvdM background code: */ +#ifndef PI +# define PI 3.141592653589793238 +#endif +#define PI_2 (PI*0.5) +#define INV_PI_360 (360.0 / PI) +#define MAX(a,b) (a>b?a:b) +#define MIN(a,b) (a> 8)) >> 8); \ +} + + +#define INBUFSIZE 4096 /* with pseudo-timing on (1 sec delay/block), this + * block size corresponds roughly to a download + * speed 10% faster than theoretical 33.6K maximum + * (assuming 8 data bits, 1 stop bit and no other + * overhead) */ + +/* local prototypes */ +static void rpng2_win_init(void); +static int rpng2_win_create_window(void); +static int rpng2_win_load_bg_image(void); +static void rpng2_win_display_row(ulg row); +static void rpng2_win_finish_display(void); +static void rpng2_win_cleanup(void); +LRESULT CALLBACK rpng2_win_wndproc(HWND, UINT, WPARAM, LPARAM); + + +static char titlebar[1024]; +static char *progname = PROGNAME; +static char *appname = LONGNAME; +static char *filename; +static FILE *infile; + +static mainprog_info rpng2_info; + +static uch inbuf[INBUFSIZE]; +static int incount; + +static int pat = 6; /* must be less than num_bgpat */ +static int bg_image = 0; +static int bgscale = 16; +static ulg bg_rowbytes; +static uch *bg_data; + +static struct rgb_color { + uch r, g, b; +} rgb[] = { + { 0, 0, 0}, /* 0: black */ + {255, 255, 255}, /* 1: white */ + {173, 132, 57}, /* 2: tan */ + { 64, 132, 0}, /* 3: medium green */ + {189, 117, 1}, /* 4: gold */ + {253, 249, 1}, /* 5: yellow */ + { 0, 0, 255}, /* 6: blue */ + { 0, 0, 120}, /* 7: medium blue */ + {255, 0, 255}, /* 8: magenta */ + { 64, 0, 64}, /* 9: dark magenta */ + {255, 0, 0}, /* 10: red */ + { 64, 0, 0}, /* 11: dark red */ + {255, 127, 0}, /* 12: orange */ + {192, 96, 0}, /* 13: darker orange */ + { 24, 60, 0}, /* 14: dark green-yellow */ + { 85, 125, 200} /* 15: ice blue */ +}; +/* not used for now, but should be for error-checking: +static int num_rgb = sizeof(rgb) / sizeof(struct rgb_color); + */ + +/* + This whole struct is a fairly cheesy way to keep the number of + command-line options to a minimum. The radial-waves background + type is a particularly poor fit to the integer elements of the + struct...but a few macros and a little fixed-point math will do + wonders for ya. + + type bits: + F E D C B A 9 8 7 6 5 4 3 2 1 0 + | | | | | + | | +-+-+-- 0 = sharp-edged checkerboard + | | 1 = soft diamonds + | | 2 = radial waves + | | 3-7 = undefined + | +-- gradient #2 inverted? + +-- alternating columns inverted? + */ +static struct background_pattern { + ush type; + int rgb1_max, rgb1_min; /* or bg_freq, bg_gray */ + int rgb2_max, rgb2_min; /* or bg_bsat, bg_brot (both scaled by 10)*/ +} bg[] = { + {0+8, 2,0, 1,15}, /* checkered: tan/black vs. white/ice blue */ + {0+24, 2,0, 1,0}, /* checkered: tan/black vs. white/black */ + {0+8, 4,5, 0,2}, /* checkered: gold/yellow vs. black/tan */ + {0+8, 4,5, 0,6}, /* checkered: gold/yellow vs. black/blue */ + {0, 7,0, 8,9}, /* checkered: deep blue/black vs. magenta */ + {0+8, 13,0, 5,14}, /* checkered: orange/black vs. yellow */ + {0+8, 12,0, 10,11}, /* checkered: orange/black vs. red */ + {1, 7,0, 8,0}, /* diamonds: deep blue/black vs. magenta */ + {1, 12,0, 11,0}, /* diamonds: orange vs. dark red */ + {1, 10,0, 7,0}, /* diamonds: red vs. medium blue */ + {1, 4,0, 5,0}, /* diamonds: gold vs. yellow */ + {1, 3,0, 0,0}, /* diamonds: medium green vs. black */ + {2, 16, 100, 20, 0}, /* radial: ~hard radial color-beams */ + {2, 18, 100, 10, 2}, /* radial: soft, curved radial color-beams */ + {2, 16, 256, 100, 250}, /* radial: very tight spiral */ + {2, 10000, 256, 11, 0} /* radial: dipole-moire' (almost fractal) */ +}; +static int num_bgpat = sizeof(bg) / sizeof(struct background_pattern); + + +/* Windows-specific global variables (could go in struct, but messy...) */ +static ulg wimage_rowbytes; +static uch *dib; +static uch *wimage_data; +static BITMAPINFOHEADER *bmih; + +static HWND global_hwnd; +static HINSTANCE global_hInst; +static int global_showmode; + + + + +int WINAPI WinMain(HINSTANCE hInst, HINSTANCE hPrevInst, PSTR cmd, int showmode) +{ + char *args[1024]; /* arbitrary limit, but should suffice */ + char **argv = args; + char *p, *q, *bgstr = NULL; + int argc = 0; + int rc, alen, flen; + int error = 0; + int timing = FALSE; + int have_bg = FALSE; + double LUT_exponent; /* just the lookup table */ + double CRT_exponent = 2.2; /* just the monitor */ + double default_display_exponent; /* whole display system */ + MSG msg; + + + /* First initialize a few things, just to be sure--memset takes care of + * default background color (black), booleans (FALSE), pointers (NULL), + * etc. */ + + global_hInst = hInst; + global_showmode = showmode; + filename = (char *)NULL; + memset(&rpng2_info, 0, sizeof(mainprog_info)); + +#ifndef __CYGWIN__ + /* Next reenable console output, which normally goes to the bit bucket + * for windowed apps. Closing the console window will terminate the + * app. Thanks to David.Geldreich@realviz.com for supplying the magical + * incantation. */ + + AllocConsole(); + freopen("CONOUT$", "a", stderr); + freopen("CONOUT$", "a", stdout); +#endif + + /* Set the default value for our display-system exponent, i.e., the + * product of the CRT exponent and the exponent corresponding to + * the frame-buffer's lookup table (LUT), if any. This is not an + * exhaustive list of LUT values (e.g., OpenStep has a lot of weird + * ones), but it should cover 99% of the current possibilities. And + * yes, these ifdefs are completely wasted in a Windows program... */ + +#if defined(NeXT) + /* third-party utilities can modify the default LUT exponent */ + LUT_exponent = 1.0 / 2.2; + /* + if (some_next_function_that_returns_gamma(&next_gamma)) + LUT_exponent = 1.0 / next_gamma; + */ +#elif defined(sgi) + LUT_exponent = 1.0 / 1.7; + /* there doesn't seem to be any documented function to + * get the "gamma" value, so we do it the hard way */ + infile = fopen("/etc/config/system.glGammaVal", "r"); + if (infile) { + double sgi_gamma; + + fgets(tmpline, 80, infile); + fclose(infile); + sgi_gamma = atof(tmpline); + if (sgi_gamma > 0.0) + LUT_exponent = 1.0 / sgi_gamma; + } +#elif defined(Macintosh) + LUT_exponent = 1.8 / 2.61; + /* + if (some_mac_function_that_returns_gamma(&mac_gamma)) + LUT_exponent = mac_gamma / 2.61; + */ +#else + LUT_exponent = 1.0; /* assume no LUT: most PCs */ +#endif + + /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ + default_display_exponent = LUT_exponent * CRT_exponent; + + + /* If the user has set the SCREEN_GAMMA environment variable as suggested + * (somewhat imprecisely) in the libpng documentation, use that; otherwise + * use the default value we just calculated. Either way, the user may + * override this via a command-line option. */ + + if ((p = getenv("SCREEN_GAMMA")) != NULL) + rpng2_info.display_exponent = atof(p); + else + rpng2_info.display_exponent = default_display_exponent; + + + /* Windows really hates command lines, so we have to set up our own argv. + * Note that we do NOT bother with quoted arguments here, so don't use + * filenames with spaces in 'em! */ + + argv[argc++] = PROGNAME; + p = cmd; + for (;;) { + if (*p == ' ') + while (*++p == ' ') + ; + /* now p points at the first non-space after some spaces */ + if (*p == '\0') + break; /* nothing after the spaces: done */ + argv[argc++] = q = p; + while (*q && *q != ' ') + ++q; + /* now q points at a space or the end of the string */ + if (*q == '\0') + break; /* last argv already terminated; quit */ + *q = '\0'; /* change space to terminator */ + p = q + 1; + } + argv[argc] = NULL; /* terminate the argv array itself */ + + + /* Now parse the command line for options and the PNG filename. */ + + while (*++argv && !error) { + if (!strncmp(*argv, "-gamma", 2)) { + if (!*++argv) + ++error; + else { + rpng2_info.display_exponent = atof(*argv); + if (rpng2_info.display_exponent <= 0.0) + ++error; + } + } else if (!strncmp(*argv, "-bgcolor", 4)) { + if (!*++argv) + ++error; + else { + bgstr = *argv; + if (strlen(bgstr) != 7 || bgstr[0] != '#') + ++error; + else { + have_bg = TRUE; + bg_image = FALSE; + } + } + } else if (!strncmp(*argv, "-bgpat", 4)) { + if (!*++argv) + ++error; + else { + pat = atoi(*argv) - 1; + if (pat < 0 || pat >= num_bgpat) + ++error; + else { + bg_image = TRUE; + have_bg = FALSE; + } + } + } else if (!strncmp(*argv, "-timing", 2)) { + timing = TRUE; + } else { + if (**argv != '-') { + filename = *argv; + if (argv[1]) /* shouldn't be any more args after filename */ + ++error; + } else + ++error; /* not expecting any other options */ + } + } + + if (!filename) + ++error; + + + /* print usage screen if any errors up to this point */ + + if (error) { +#ifndef __CYGWIN__ + int ch; +#endif + + fprintf(stderr, "\n%s %s: %s\n\n", PROGNAME, VERSION, appname); + readpng2_version_info(); + fprintf(stderr, "\n" + "Usage: %s [-gamma exp] [-bgcolor bg | -bgpat pat] [-timing]\n" + " %*s file.png\n\n" + " exp \ttransfer-function exponent (``gamma'') of the display\n" + "\t\t system in floating-point format (e.g., ``%.1f''); equal\n" + "\t\t to the product of the lookup-table exponent (varies)\n" + "\t\t and the CRT exponent (usually 2.2); must be positive\n" + " bg \tdesired background color in 7-character hex RGB format\n" + "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" + "\t\t used with transparent images; overrides -bgpat option\n" + " pat \tdesired background pattern number (1-%d); used with\n" + "\t\t transparent images; overrides -bgcolor option\n" + " -timing\tenables delay for every block read, to simulate modem\n" + "\t\t download of image (~36 Kbps)\n" + "\nPress Q, Esc or mouse button 1 after image is displayed to quit.\n" +#ifndef __CYGWIN__ + "Press Q or Esc to quit this usage screen. ", +#else + , +#endif + PROGNAME, +#if (defined(__i386__) || defined(_M_IX86) || defined(__x86_64__)) && \ + !(defined(__CYGWIN__) || defined(__MINGW32__)) + (int)strlen(PROGNAME), " ", +#endif + (int)strlen(PROGNAME), " ", default_display_exponent, num_bgpat); + fflush(stderr); +#ifndef __CYGWIN__ + do + ch = _getch(); + while (ch != 'q' && ch != 'Q' && ch != 0x1B); +#endif + exit(1); + } + + + if (!(infile = fopen(filename, "rb"))) { + fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); + ++error; + } else { + incount = fread(inbuf, 1, INBUFSIZE, infile); + if (incount < 8 || !readpng2_check_sig(inbuf, 8)) { + fprintf(stderr, PROGNAME + ": [%s] is not a PNG file: incorrect signature\n", + filename); + ++error; + } else if ((rc = readpng2_init(&rpng2_info)) != 0) { + switch (rc) { + case 2: + fprintf(stderr, PROGNAME + ": [%s] has bad IHDR (libpng longjmp)\n", filename); + break; + case 4: + fprintf(stderr, PROGNAME ": insufficient memory\n"); + break; + default: + fprintf(stderr, PROGNAME + ": unknown readpng2_init() error\n"); + break; + } + ++error; + } + if (error) + fclose(infile); + } + + + if (error) { +#ifndef __CYGWIN__ + int ch; +#endif + + fprintf(stderr, PROGNAME ": aborting.\n"); +#ifndef __CYGWIN__ + do + ch = _getch(); + while (ch != 'q' && ch != 'Q' && ch != 0x1B); +#endif + exit(2); + } else { + fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, appname); +#ifndef __CYGWIN__ + fprintf(stderr, + "\n [console window: closing this window will terminate %s]\n\n", + PROGNAME); +#endif + fflush(stderr); + } + + + /* set the title-bar string, but make sure buffer doesn't overflow */ + + alen = strlen(appname); + flen = strlen(filename); + if (alen + flen + 3 > 1023) + sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); + else + sprintf(titlebar, "%s: %s", appname, filename); + + + /* set some final rpng2_info variables before entering main data loop */ + + if (have_bg) { + unsigned r, g, b; /* this approach quiets compiler warnings */ + + sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); + rpng2_info.bg_red = (uch)r; + rpng2_info.bg_green = (uch)g; + rpng2_info.bg_blue = (uch)b; + } else + rpng2_info.need_bgcolor = TRUE; + + rpng2_info.state = kPreInit; + rpng2_info.mainprog_init = rpng2_win_init; + rpng2_info.mainprog_display_row = rpng2_win_display_row; + rpng2_info.mainprog_finish_display = rpng2_win_finish_display; + + + /* OK, this is the fun part: call readpng2_decode_data() at the start of + * the loop to deal with our first buffer of data (read in above to verify + * that the file is a PNG image), then loop through the file and continue + * calling the same routine to handle each chunk of data. It in turn + * passes the data to libpng, which will invoke one or more of our call- + * backs as decoded data become available. We optionally call Sleep() for + * one second per iteration to simulate downloading the image via an analog + * modem. */ + + for (;;) { + Trace((stderr, "about to call readpng2_decode_data()\n")) + if (readpng2_decode_data(&rpng2_info, inbuf, incount)) + ++error; + Trace((stderr, "done with readpng2_decode_data()\n")) + + if (error || incount != INBUFSIZE || rpng2_info.state == kDone) { + if (rpng2_info.state == kDone) { + Trace((stderr, "done decoding PNG image\n")) + } else if (ferror(infile)) { + fprintf(stderr, PROGNAME + ": error while reading PNG image file\n"); + exit(3); + } else if (feof(infile)) { + fprintf(stderr, PROGNAME ": end of file reached " + "(unexpectedly) while reading PNG image file\n"); + exit(3); + } else /* if (error) */ { + /* will print error message below */ + } + break; + } + + if (timing) + Sleep(1000L); + + incount = fread(inbuf, 1, INBUFSIZE, infile); + } + + + /* clean up PNG stuff and report any decoding errors */ + + fclose(infile); + Trace((stderr, "about to call readpng2_cleanup()\n")) + readpng2_cleanup(&rpng2_info); + + if (error) { + fprintf(stderr, PROGNAME ": libpng error while decoding PNG image\n"); + exit(3); + } + + + /* wait for the user to tell us when to quit */ + + while (GetMessage(&msg, NULL, 0, 0)) { + TranslateMessage(&msg); + DispatchMessage(&msg); + } + + + /* we're done: clean up all image and Windows resources and go away */ + + Trace((stderr, "about to call rpng2_win_cleanup()\n")) + rpng2_win_cleanup(); + + return msg.wParam; +} + + + + + +/* this function is called by readpng2_info_callback() in readpng2.c, which + * in turn is called by libpng after all of the pre-IDAT chunks have been + * read and processed--i.e., we now have enough info to finish initializing */ + +static void rpng2_win_init() +{ + ulg i; + ulg rowbytes = rpng2_info.rowbytes; + + Trace((stderr, "beginning rpng2_win_init()\n")) + Trace((stderr, " rowbytes = %d\n", rpng2_info.rowbytes)) + Trace((stderr, " width = %ld\n", rpng2_info.width)) + Trace((stderr, " height = %ld\n", rpng2_info.height)) + + rpng2_info.image_data = (uch *)malloc(rowbytes * rpng2_info.height); + if (!rpng2_info.image_data) { + readpng2_cleanup(&rpng2_info); + return; + } + + rpng2_info.row_pointers = (uch **)malloc(rpng2_info.height * sizeof(uch *)); + if (!rpng2_info.row_pointers) { + free(rpng2_info.image_data); + rpng2_info.image_data = NULL; + readpng2_cleanup(&rpng2_info); + return; + } + + for (i = 0; i < rpng2_info.height; ++i) + rpng2_info.row_pointers[i] = rpng2_info.image_data + i*rowbytes; + +/*--------------------------------------------------------------------------- + Do the basic Windows initialization stuff, make the window, and fill it + with the user-specified, file-specified or default background color. + ---------------------------------------------------------------------------*/ + + if (rpng2_win_create_window()) { + readpng2_cleanup(&rpng2_info); + return; + } + + rpng2_info.state = kWindowInit; +} + + + + + +static int rpng2_win_create_window() +{ + uch bg_red = rpng2_info.bg_red; + uch bg_green = rpng2_info.bg_green; + uch bg_blue = rpng2_info.bg_blue; + uch *dest; + int extra_width, extra_height; + ulg i, j; + WNDCLASSEX wndclass; + RECT rect; + + +/*--------------------------------------------------------------------------- + Allocate memory for the display-specific version of the image (round up + to multiple of 4 for Windows DIB). + ---------------------------------------------------------------------------*/ + + wimage_rowbytes = ((3*rpng2_info.width + 3L) >> 2) << 2; + + if (!(dib = (uch *)malloc(sizeof(BITMAPINFOHEADER) + + wimage_rowbytes*rpng2_info.height))) + { + return 4; /* fail */ + } + +/*--------------------------------------------------------------------------- + Initialize the DIB. Negative height means to use top-down BMP ordering + (must be uncompressed, but that's what we want). Bit count of 1, 4 or 8 + implies a colormap of RGBX quads, but 24-bit BMPs just use B,G,R values + directly => wimage_data begins immediately after BMP header. + ---------------------------------------------------------------------------*/ + + memset(dib, 0, sizeof(BITMAPINFOHEADER)); + bmih = (BITMAPINFOHEADER *)dib; + bmih->biSize = sizeof(BITMAPINFOHEADER); + bmih->biWidth = rpng2_info.width; + bmih->biHeight = -((long)rpng2_info.height); + bmih->biPlanes = 1; + bmih->biBitCount = 24; + bmih->biCompression = 0; + wimage_data = dib + sizeof(BITMAPINFOHEADER); + +/*--------------------------------------------------------------------------- + Fill window with the specified background color (default is black), but + defer loading faked "background image" until window is displayed (may be + slow to compute). Data are in BGR order. + ---------------------------------------------------------------------------*/ + + if (bg_image) { /* just fill with black for now */ + memset(wimage_data, 0, wimage_rowbytes*rpng2_info.height); + } else { + for (j = 0; j < rpng2_info.height; ++j) { + dest = wimage_data + j*wimage_rowbytes; + for (i = rpng2_info.width; i > 0; --i) { + *dest++ = bg_blue; + *dest++ = bg_green; + *dest++ = bg_red; + } + } + } + +/*--------------------------------------------------------------------------- + Set the window parameters. + ---------------------------------------------------------------------------*/ + + memset(&wndclass, 0, sizeof(wndclass)); + + wndclass.cbSize = sizeof(wndclass); + wndclass.style = CS_HREDRAW | CS_VREDRAW; + wndclass.lpfnWndProc = rpng2_win_wndproc; + wndclass.hInstance = global_hInst; + wndclass.hIcon = LoadIcon(NULL, IDI_APPLICATION); + wndclass.hCursor = LoadCursor(NULL, IDC_ARROW); + wndclass.hbrBackground = (HBRUSH)GetStockObject(DKGRAY_BRUSH); + wndclass.lpszMenuName = NULL; + wndclass.lpszClassName = progname; + wndclass.hIconSm = LoadIcon(NULL, IDI_APPLICATION); + + RegisterClassEx(&wndclass); + +/*--------------------------------------------------------------------------- + Finally, create the window. + ---------------------------------------------------------------------------*/ + + extra_width = 2*(GetSystemMetrics(SM_CXBORDER) + + GetSystemMetrics(SM_CXDLGFRAME)); + extra_height = 2*(GetSystemMetrics(SM_CYBORDER) + + GetSystemMetrics(SM_CYDLGFRAME)) + + GetSystemMetrics(SM_CYCAPTION); + + global_hwnd = CreateWindow(progname, titlebar, WS_OVERLAPPEDWINDOW, + CW_USEDEFAULT, CW_USEDEFAULT, rpng2_info.width+extra_width, + rpng2_info.height+extra_height, NULL, NULL, global_hInst, NULL); + + ShowWindow(global_hwnd, global_showmode); + UpdateWindow(global_hwnd); + +/*--------------------------------------------------------------------------- + Now compute the background image and display it. If it fails (memory + allocation), revert to a plain background color. + ---------------------------------------------------------------------------*/ + + if (bg_image) { + static const char *msg = "Computing background image..."; + int x, y, len = strlen(msg); + HDC hdc = GetDC(global_hwnd); + TEXTMETRIC tm; + + GetTextMetrics(hdc, &tm); + x = (rpng2_info.width - len*tm.tmAveCharWidth)/2; + y = (rpng2_info.height - tm.tmHeight)/2; + SetBkMode(hdc, TRANSPARENT); + SetTextColor(hdc, GetSysColor(COLOR_HIGHLIGHTTEXT)); + /* this can still begin out of bounds even if x is positive (???): */ + TextOut(hdc, ((x < 0)? 0 : x), ((y < 0)? 0 : y), msg, len); + ReleaseDC(global_hwnd, hdc); + + rpng2_win_load_bg_image(); /* resets bg_image if fails */ + } + + if (!bg_image) { + for (j = 0; j < rpng2_info.height; ++j) { + dest = wimage_data + j*wimage_rowbytes; + for (i = rpng2_info.width; i > 0; --i) { + *dest++ = bg_blue; + *dest++ = bg_green; + *dest++ = bg_red; + } + } + } + + rect.left = 0L; + rect.top = 0L; + rect.right = (LONG)rpng2_info.width; /* possibly off by one? */ + rect.bottom = (LONG)rpng2_info.height; /* possibly off by one? */ + InvalidateRect(global_hwnd, &rect, FALSE); + UpdateWindow(global_hwnd); /* similar to XFlush() */ + + return 0; + +} /* end function rpng2_win_create_window() */ + + + + + +static int rpng2_win_load_bg_image() +{ + uch *src, *dest; + uch r1, r2, g1, g2, b1, b2; + uch r1_inv, r2_inv, g1_inv, g2_inv, b1_inv, b2_inv; + int k, hmax, max; + int xidx, yidx, yidx_max = (bgscale-1); + int even_odd_vert, even_odd_horiz, even_odd; + int invert_gradient2 = (bg[pat].type & 0x08); + int invert_column; + ulg i, row; + +/*--------------------------------------------------------------------------- + Allocate buffer for fake background image to be used with transparent + images; if this fails, revert to plain background color. + ---------------------------------------------------------------------------*/ + + bg_rowbytes = 3 * rpng2_info.width; + bg_data = (uch *)malloc(bg_rowbytes * rpng2_info.height); + if (!bg_data) { + fprintf(stderr, PROGNAME + ": unable to allocate memory for background image\n"); + bg_image = 0; + return 1; + } + +/*--------------------------------------------------------------------------- + Vertical gradients (ramps) in NxN squares, alternating direction and + colors (N == bgscale). + ---------------------------------------------------------------------------*/ + + if ((bg[pat].type & 0x07) == 0) { + uch r1_min = rgb[bg[pat].rgb1_min].r; + uch g1_min = rgb[bg[pat].rgb1_min].g; + uch b1_min = rgb[bg[pat].rgb1_min].b; + uch r2_min = rgb[bg[pat].rgb2_min].r; + uch g2_min = rgb[bg[pat].rgb2_min].g; + uch b2_min = rgb[bg[pat].rgb2_min].b; + int r1_diff = rgb[bg[pat].rgb1_max].r - r1_min; + int g1_diff = rgb[bg[pat].rgb1_max].g - g1_min; + int b1_diff = rgb[bg[pat].rgb1_max].b - b1_min; + int r2_diff = rgb[bg[pat].rgb2_max].r - r2_min; + int g2_diff = rgb[bg[pat].rgb2_max].g - g2_min; + int b2_diff = rgb[bg[pat].rgb2_max].b - b2_min; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = row % bgscale; + even_odd_vert = (row / bgscale) & 1; + + r1 = r1_min + (r1_diff * yidx) / yidx_max; + g1 = g1_min + (g1_diff * yidx) / yidx_max; + b1 = b1_min + (b1_diff * yidx) / yidx_max; + r1_inv = r1_min + (r1_diff * (yidx_max-yidx)) / yidx_max; + g1_inv = g1_min + (g1_diff * (yidx_max-yidx)) / yidx_max; + b1_inv = b1_min + (b1_diff * (yidx_max-yidx)) / yidx_max; + + r2 = r2_min + (r2_diff * yidx) / yidx_max; + g2 = g2_min + (g2_diff * yidx) / yidx_max; + b2 = b2_min + (b2_diff * yidx) / yidx_max; + r2_inv = r2_min + (r2_diff * (yidx_max-yidx)) / yidx_max; + g2_inv = g2_min + (g2_diff * (yidx_max-yidx)) / yidx_max; + b2_inv = b2_min + (b2_diff * (yidx_max-yidx)) / yidx_max; + + dest = bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + even_odd_horiz = (i / bgscale) & 1; + even_odd = even_odd_vert ^ even_odd_horiz; + invert_column = + (even_odd_horiz && (bg[pat].type & 0x10)); + if (even_odd == 0) { /* gradient #1 */ + if (invert_column) { + *dest++ = r1_inv; + *dest++ = g1_inv; + *dest++ = b1_inv; + } else { + *dest++ = r1; + *dest++ = g1; + *dest++ = b1; + } + } else { /* gradient #2 */ + if ((invert_column && invert_gradient2) || + (!invert_column && !invert_gradient2)) + { + *dest++ = r2; /* not inverted or */ + *dest++ = g2; /* doubly inverted */ + *dest++ = b2; + } else { + *dest++ = r2_inv; + *dest++ = g2_inv; /* singly inverted */ + *dest++ = b2_inv; + } + } + } + } + +/*--------------------------------------------------------------------------- + Soft gradient-diamonds with scale = bgscale. Code contributed by Adam + M. Costello. + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 1) { + + hmax = (bgscale-1)/2; /* half the max weight of a color */ + max = 2*hmax; /* the max weight of a color */ + + r1 = rgb[bg[pat].rgb1_max].r; + g1 = rgb[bg[pat].rgb1_max].g; + b1 = rgb[bg[pat].rgb1_max].b; + r2 = rgb[bg[pat].rgb2_max].r; + g2 = rgb[bg[pat].rgb2_max].g; + b2 = rgb[bg[pat].rgb2_max].b; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = row % bgscale; + if (yidx > hmax) + yidx = bgscale-1 - yidx; + dest = bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + xidx = i % bgscale; + if (xidx > hmax) + xidx = bgscale-1 - xidx; + k = xidx + yidx; + *dest++ = (k*r1 + (max-k)*r2) / max; + *dest++ = (k*g1 + (max-k)*g2) / max; + *dest++ = (k*b1 + (max-k)*b2) / max; + } + } + +/*--------------------------------------------------------------------------- + Radial "starburst" with azimuthal sinusoids; [eventually number of sinu- + soids will equal bgscale?]. This one is slow but very cool. Code con- + tributed by Pieter S. van der Meulen (originally in Smalltalk). + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 2) { + uch ch; + int ii, x, y, hw, hh, grayspot; + double freq, rotate, saturate, gray, intensity; + double angle=0.0, aoffset=0.0, maxDist, dist; + double red=0.0, green=0.0, blue=0.0, hue, s, v, f, p, q, t; + + fprintf(stderr, "%s: computing radial background...", + PROGNAME); + fflush(stderr); + + hh = rpng2_info.height / 2; + hw = rpng2_info.width / 2; + + /* variables for radial waves: + * aoffset: number of degrees to rotate hue [CURRENTLY NOT USED] + * freq: number of color beams originating from the center + * grayspot: size of the graying center area (anti-alias) + * rotate: rotation of the beams as a function of radius + * saturate: saturation of beams' shape azimuthally + */ + angle = CLIP(angle, 0.0, 360.0); + grayspot = CLIP(bg[pat].bg_gray, 1, (hh + hw)); + freq = MAX((double)bg[pat].bg_freq, 0.0); + saturate = (double)bg[pat].bg_bsat * 0.1; + rotate = (double)bg[pat].bg_brot * 0.1; + gray = 0.0; + intensity = 0.0; + maxDist = (double)((hw*hw) + (hh*hh)); + + for (row = 0; row < rpng2_info.height; ++row) { + y = row - hh; + dest = bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + x = i - hw; + angle = (x == 0)? PI_2 : atan((double)y / (double)x); + gray = (double)MAX(ABS(y), ABS(x)) / grayspot; + gray = MIN(1.0, gray); + dist = (double)((x*x) + (y*y)) / maxDist; + intensity = cos((angle+(rotate*dist*PI)) * freq) * + gray * saturate; + intensity = (MAX(MIN(intensity,1.0),-1.0) + 1.0) * 0.5; + hue = (angle + PI) * INV_PI_360 + aoffset; + s = gray * ((double)(ABS(x)+ABS(y)) / (double)(hw + hh)); + s = MIN(MAX(s,0.0), 1.0); + v = MIN(MAX(intensity,0.0), 1.0); + + if (s == 0.0) { + ch = (uch)(v * 255.0); + *dest++ = ch; + *dest++ = ch; + *dest++ = ch; + } else { + if ((hue < 0.0) || (hue >= 360.0)) + hue -= (((int)(hue / 360.0)) * 360.0); + hue /= 60.0; + ii = (int)hue; + f = hue - (double)ii; + p = (1.0 - s) * v; + q = (1.0 - (s * f)) * v; + t = (1.0 - (s * (1.0 - f))) * v; + if (ii == 0) { red = v; green = t; blue = p; } + else if (ii == 1) { red = q; green = v; blue = p; } + else if (ii == 2) { red = p; green = v; blue = t; } + else if (ii == 3) { red = p; green = q; blue = v; } + else if (ii == 4) { red = t; green = p; blue = v; } + else if (ii == 5) { red = v; green = p; blue = q; } + *dest++ = (uch)(red * 255.0); + *dest++ = (uch)(green * 255.0); + *dest++ = (uch)(blue * 255.0); + } + } + } + fprintf(stderr, "done.\n"); + fflush(stderr); + } + +/*--------------------------------------------------------------------------- + Blast background image to display buffer before beginning PNG decode; + calling function will handle invalidation and UpdateWindow() call. + ---------------------------------------------------------------------------*/ + + for (row = 0; row < rpng2_info.height; ++row) { + src = bg_data + row*bg_rowbytes; + dest = wimage_data + row*wimage_rowbytes; + for (i = rpng2_info.width; i > 0; --i) { + r1 = *src++; + g1 = *src++; + b1 = *src++; + *dest++ = b1; + *dest++ = g1; /* note reverse order */ + *dest++ = r1; + } + } + + return 0; + +} /* end function rpng2_win_load_bg_image() */ + + + + + +static void rpng2_win_display_row(ulg row) +{ + uch bg_red = rpng2_info.bg_red; + uch bg_green = rpng2_info.bg_green; + uch bg_blue = rpng2_info.bg_blue; + uch *src, *src2=NULL, *dest; + uch r, g, b, a; + ulg i; + static int rows=0; + static ulg firstrow; + +/*--------------------------------------------------------------------------- + rows and firstrow simply track how many rows (and which ones) have not + yet been displayed; alternatively, we could call InvalidateRect() for + every row and not bother with the records-keeping. + ---------------------------------------------------------------------------*/ + + Trace((stderr, "beginning rpng2_win_display_row()\n")) + + if (rows == 0) + firstrow = row; /* first row not yet displayed */ + + ++rows; /* count of rows received but not yet displayed */ + +/*--------------------------------------------------------------------------- + Aside from the use of the rpng2_info struct and the lack of an outer + loop (over rows), this routine is identical to rpng_win_display_image() + in the non-progressive version of the program. + ---------------------------------------------------------------------------*/ + + src = rpng2_info.image_data + row*rpng2_info.rowbytes; + if (bg_image) + src2 = bg_data + row*bg_rowbytes; + dest = wimage_data + row*wimage_rowbytes; + + if (rpng2_info.channels == 3) { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + *dest++ = b; + *dest++ = g; /* note reverse order */ + *dest++ = r; + } + } else /* if (rpng2_info.channels == 4) */ { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (bg_image) { + bg_red = *src2++; + bg_green = *src2++; + bg_blue = *src2++; + } + if (a == 255) { + *dest++ = b; + *dest++ = g; + *dest++ = r; + } else if (a == 0) { + *dest++ = bg_blue; + *dest++ = bg_green; + *dest++ = bg_red; + } else { + /* this macro (copied from png.h) composites the + * foreground and background values and puts the + * result into the first argument; there are no + * side effects with the first argument */ + alpha_composite(*dest++, b, a, bg_blue); + alpha_composite(*dest++, g, a, bg_green); + alpha_composite(*dest++, r, a, bg_red); + } + } + } + +/*--------------------------------------------------------------------------- + Display after every 16 rows or when on last row. (Region may include + previously displayed lines due to interlacing--i.e., not contiguous.) + ---------------------------------------------------------------------------*/ + + if ((rows & 0xf) == 0 || row == rpng2_info.height-1) { + RECT rect; + + rect.left = 0L; + rect.top = (LONG)firstrow; + rect.right = (LONG)rpng2_info.width; /* possibly off by one? */ + rect.bottom = (LONG)row + 1L; /* possibly off by one? */ + InvalidateRect(global_hwnd, &rect, FALSE); + UpdateWindow(global_hwnd); /* similar to XFlush() */ + rows = 0; + } + +} /* end function rpng2_win_display_row() */ + + + + + +static void rpng2_win_finish_display() +{ + Trace((stderr, "beginning rpng2_win_finish_display()\n")) + + /* last row has already been displayed by rpng2_win_display_row(), so + * we have nothing to do here except set a flag and let the user know + * that the image is done */ + + rpng2_info.state = kDone; + printf( +#ifndef __CYGWIN__ + "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n" +#else + "Done. Press mouse button 1 (within image window) to quit.\n" +#endif + ); + fflush(stdout); +} + + + + + +static void rpng2_win_cleanup() +{ + if (bg_image && bg_data) { + free(bg_data); + bg_data = NULL; + } + + if (rpng2_info.image_data) { + free(rpng2_info.image_data); + rpng2_info.image_data = NULL; + } + + if (rpng2_info.row_pointers) { + free(rpng2_info.row_pointers); + rpng2_info.row_pointers = NULL; + } + + if (dib) { + free(dib); + dib = NULL; + } +} + + + + + +LRESULT CALLBACK rpng2_win_wndproc(HWND hwnd, UINT iMsg, WPARAM wP, LPARAM lP) +{ + HDC hdc; + PAINTSTRUCT ps; + int rc; + + switch (iMsg) { + case WM_CREATE: + /* one-time processing here, if any */ + return 0; + + case WM_PAINT: + hdc = BeginPaint(hwnd, &ps); + rc = StretchDIBits(hdc, 0, 0, rpng2_info.width, rpng2_info.height, + 0, 0, rpng2_info.width, rpng2_info.height, + wimage_data, (BITMAPINFO *)bmih, + 0, SRCCOPY); + EndPaint(hwnd, &ps); + return 0; + + /* wait for the user to tell us when to quit */ + case WM_CHAR: + switch (wP) { /* only need one, so ignore repeat count */ + case 'q': + case 'Q': + case 0x1B: /* Esc key */ + PostQuitMessage(0); + } + return 0; + + case WM_LBUTTONDOWN: /* another way of quitting */ + case WM_DESTROY: + PostQuitMessage(0); + return 0; + } + + return DefWindowProc(hwnd, iMsg, wP, lP); +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng2-x.c b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng2-x.c new file mode 100644 index 000000000..7f24b632b --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/rpng2-x.c @@ -0,0 +1,2107 @@ +/*--------------------------------------------------------------------------- + + rpng2 - progressive-model PNG display program rpng2-x.c + + This program decodes and displays PNG files progressively, as if it were + a web browser (though the front end is only set up to read from files). + It supports gamma correction, user-specified background colors, and user- + specified background patterns (for transparent images). This version is + for the X Window System (tested by the author under Unix and by Martin + Zinser under OpenVMS; may work under OS/2 with a little tweaking). + + Thanks to Adam Costello and Pieter S. van der Meulen for the "diamond" + and "radial waves" patterns, respectively. + + to do (someday, maybe): + - fix expose/redraw code: don't draw entire row if only part exposed + - 8-bit (colormapped) X support + - finish resizable checkerboard-gradient (sizes 4-128?) + - use %.1023s to simplify truncation of title-bar string? + + --------------------------------------------------------------------------- + + Changelog: + - 1.01: initial public release + - 1.02: modified to allow abbreviated options; fixed char/uchar mismatch + - 1.10: added support for non-default visuals; fixed X pixel-conversion + - 1.11: added -usleep option for demos; fixed command-line parsing bug + - 1.12: added -pause option for demos and testing + - 1.20: added runtime MMX-enabling/disabling and new -mmx* options + - 1.21: fixed some small X memory leaks (thanks to François Petitjean) + - 1.22: fixed XFreeGC() crash bug (thanks to Patrick Welche) + - 1.23: added -bgpat 0 mode (std white/gray checkerboard, 8x8 squares) + - 1.30: added -loop option for -bgpat (ifdef FEATURE_LOOP); fixed bpp = + 24; added support for X resources (thanks to Gerhard Niklasch) + - 1.31: added code to skip unused chunks (thanks to Glenn Randers-Pehrson) + - 1.32: added AMD64/EM64T support (__x86_64__); added basic expose/redraw + handling + - 2.00: dual-licensed (added GNU GPL) + - 2.01: fixed 64-bit typo in readpng2.c; fixed -pause usage description + - 2.02: fixed improper display of usage screen on PNG error(s); fixed + unexpected-EOF and file-read-error cases; fixed Trace() cut-and- + paste bugs + - 2.03: deleted runtime MMX-enabling/disabling and obsolete -mmx* options + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#define PROGNAME "rpng2-x" +#define LONGNAME "Progressive PNG Viewer for X" +#define VERSION "2.03 of 25 February 2010" +#define RESNAME "rpng2" /* our X resource application name */ +#define RESCLASS "Rpng" /* our X resource class name */ + +#include +#include +#include +#include +#include /* for jmpbuf declaration in readpng2.h */ +#include +#include /* only for PvdM background code */ +#include +#include +#include +#include /* defines XK_* macros */ + +#ifdef VMS +# include +#endif + +/* all for PvdM background code: */ +#ifndef PI +# define PI 3.141592653589793238 +#endif +#define PI_2 (PI*0.5) +#define INV_PI_360 (360.0 / PI) +#define MAX(a,b) (a>b?a:b) +#define MIN(a,b) (a> 8)) >> 8); \ +} + + +#define INBUFSIZE 4096 /* with pseudo-timing on (1 sec delay/block), this + * block size corresponds roughly to a download + * speed 10% faster than theoretical 33.6K maximum + * (assuming 8 data bits, 1 stop bit and no other + * overhead) */ + +/* local prototypes */ +static void rpng2_x_init (void); +static int rpng2_x_create_window (void); +static int rpng2_x_load_bg_image (void); +static void rpng2_x_display_row (ulg row); +static void rpng2_x_finish_display (void); +static void rpng2_x_redisplay_image (ulg startcol, ulg startrow, + ulg width, ulg height); +#ifdef FEATURE_LOOP +static void rpng2_x_reload_bg_image (void); +static int is_number (char *p); +#endif +static void rpng2_x_cleanup (void); +static int rpng2_x_msb (ulg u32val); + + +static char titlebar[1024], *window_name = titlebar; +static char *appname = LONGNAME; +static char *icon_name = PROGNAME; +static char *res_name = RESNAME; +static char *res_class = RESCLASS; +static char *filename; +static FILE *infile; + +static mainprog_info rpng2_info; + +static uch inbuf[INBUFSIZE]; +static int incount; + +static int pat = 6; /* must be less than num_bgpat */ +static int bg_image = 0; +static int bgscale, bgscale_default = 16; +static ulg bg_rowbytes; +static uch *bg_data; + +int pause_after_pass = FALSE; +int demo_timing = FALSE; +ulg usleep_duration = 0L; + +static struct rgb_color { + uch r, g, b; +} rgb[] = { + { 0, 0, 0}, /* 0: black */ + {255, 255, 255}, /* 1: white */ + {173, 132, 57}, /* 2: tan */ + { 64, 132, 0}, /* 3: medium green */ + {189, 117, 1}, /* 4: gold */ + {253, 249, 1}, /* 5: yellow */ + { 0, 0, 255}, /* 6: blue */ + { 0, 0, 120}, /* 7: medium blue */ + {255, 0, 255}, /* 8: magenta */ + { 64, 0, 64}, /* 9: dark magenta */ + {255, 0, 0}, /* 10: red */ + { 64, 0, 0}, /* 11: dark red */ + {255, 127, 0}, /* 12: orange */ + {192, 96, 0}, /* 13: darker orange */ + { 24, 60, 0}, /* 14: dark green-yellow */ + { 85, 125, 200}, /* 15: ice blue */ + {192, 192, 192} /* 16: Netscape/Mosaic gray */ +}; +/* not used for now, but should be for error-checking: +static int num_rgb = sizeof(rgb) / sizeof(struct rgb_color); + */ + +/* + This whole struct is a fairly cheesy way to keep the number of + command-line options to a minimum. The radial-waves background + type is a particularly poor fit to the integer elements of the + struct...but a few macros and a little fixed-point math will do + wonders for ya. + + type bits: + F E D C B A 9 8 7 6 5 4 3 2 1 0 + | | | | | + | | +-+-+-- 0 = sharp-edged checkerboard + | | 1 = soft diamonds + | | 2 = radial waves + | | 3-7 = undefined + | +-- gradient #2 inverted? + +-- alternating columns inverted? + */ +static struct background_pattern { + ush type; + int rgb1_max, rgb1_min; /* or bg_freq, bg_gray */ + int rgb2_max, rgb2_min; /* or bg_bsat, bg_brot (both scaled by 10)*/ +} bg[] = { + {0, 1,1, 16,16}, /* checkered: white vs. light gray (basic) */ + {0+8, 2,0, 1,15}, /* checkered: tan/black vs. white/ice blue */ + {0+24, 2,0, 1,0}, /* checkered: tan/black vs. white/black */ + {0+8, 4,5, 0,2}, /* checkered: gold/yellow vs. black/tan */ + {0+8, 4,5, 0,6}, /* checkered: gold/yellow vs. black/blue */ + {0, 7,0, 8,9}, /* checkered: deep blue/black vs. magenta */ + {0+8, 13,0, 5,14}, /* checkered: orange/black vs. yellow */ + {0+8, 12,0, 10,11}, /* checkered: orange/black vs. red */ + {1, 7,0, 8,0}, /* diamonds: deep blue/black vs. magenta */ + {1, 12,0, 11,0}, /* diamonds: orange vs. dark red */ + {1, 10,0, 7,0}, /* diamonds: red vs. medium blue */ + {1, 4,0, 5,0}, /* diamonds: gold vs. yellow */ + {1, 3,0, 0,0}, /* diamonds: medium green vs. black */ + {2, 16, 100, 20, 0}, /* radial: ~hard radial color-beams */ + {2, 18, 100, 10, 2}, /* radial: soft, curved radial color-beams */ + {2, 16, 256, 100, 250}, /* radial: very tight spiral */ + {2, 10000, 256, 11, 0} /* radial: dipole-moire' (almost fractal) */ +}; +static int num_bgpat = sizeof(bg) / sizeof(struct background_pattern); + + +/* X-specific variables */ +static char *displayname; +static XImage *ximage; +static Display *display; +static int depth; +static Visual *visual; +static XVisualInfo *visual_list; +static int RShift, GShift, BShift; +static ulg RMask, GMask, BMask; +static Window window; +static GC gc; +static Colormap colormap; + +static int have_nondefault_visual = FALSE; +static int have_colormap = FALSE; +static int have_window = FALSE; +static int have_gc = FALSE; + + + + +int main(int argc, char **argv) +{ +#ifdef sgi + char tmpline[80]; +#endif + char *p, *bgstr = NULL; + int rc, alen, flen; + int error = 0; + int timing = FALSE; + int have_bg = FALSE; +#ifdef FEATURE_LOOP + int loop = FALSE; + long loop_interval = -1; /* seconds (100,000 max) */ +#endif + double LUT_exponent; /* just the lookup table */ + double CRT_exponent = 2.2; /* just the monitor */ + double default_display_exponent; /* whole display system */ + XEvent e; + KeySym k; + + + /* First initialize a few things, just to be sure--memset takes care of + * default background color (black), booleans (FALSE), pointers (NULL), + * etc. */ + + displayname = (char *)NULL; + filename = (char *)NULL; + memset(&rpng2_info, 0, sizeof(mainprog_info)); + + + /* Set the default value for our display-system exponent, i.e., the + * product of the CRT exponent and the exponent corresponding to + * the frame-buffer's lookup table (LUT), if any. This is not an + * exhaustive list of LUT values (e.g., OpenStep has a lot of weird + * ones), but it should cover 99% of the current possibilities. */ + +#if defined(NeXT) + /* third-party utilities can modify the default LUT exponent */ + LUT_exponent = 1.0 / 2.2; + /* + if (some_next_function_that_returns_gamma(&next_gamma)) + LUT_exponent = 1.0 / next_gamma; + */ +#elif defined(sgi) + LUT_exponent = 1.0 / 1.7; + /* there doesn't seem to be any documented function to + * get the "gamma" value, so we do it the hard way */ + infile = fopen("/etc/config/system.glGammaVal", "r"); + if (infile) { + double sgi_gamma; + + fgets(tmpline, 80, infile); + fclose(infile); + sgi_gamma = atof(tmpline); + if (sgi_gamma > 0.0) + LUT_exponent = 1.0 / sgi_gamma; + } +#elif defined(Macintosh) + LUT_exponent = 1.8 / 2.61; + /* + if (some_mac_function_that_returns_gamma(&mac_gamma)) + LUT_exponent = mac_gamma / 2.61; + */ +#else + LUT_exponent = 1.0; /* assume no LUT: most PCs */ +#endif + + /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ + default_display_exponent = LUT_exponent * CRT_exponent; + + + /* If the user has set the SCREEN_GAMMA environment variable as suggested + * (somewhat imprecisely) in the libpng documentation, use that; otherwise + * use the default value we just calculated. Either way, the user may + * override this via a command-line option. */ + + if ((p = getenv("SCREEN_GAMMA")) != NULL) + rpng2_info.display_exponent = atof(p); + else + rpng2_info.display_exponent = default_display_exponent; + + + /* Now parse the command line for options and the PNG filename. */ + + while (*++argv && !error) { + if (!strncmp(*argv, "-display", 2)) { + if (!*++argv) + ++error; + else + displayname = *argv; + } else if (!strncmp(*argv, "-gamma", 2)) { + if (!*++argv) + ++error; + else { + rpng2_info.display_exponent = atof(*argv); + if (rpng2_info.display_exponent <= 0.0) + ++error; + } + } else if (!strncmp(*argv, "-bgcolor", 4)) { + if (!*++argv) + ++error; + else { + bgstr = *argv; + if (strlen(bgstr) != 7 || bgstr[0] != '#') + ++error; + else { + have_bg = TRUE; + bg_image = FALSE; + } + } + } else if (!strncmp(*argv, "-bgpat", 4)) { + if (!*++argv) + ++error; + else { + pat = atoi(*argv); + if (pat >= 0 && pat < num_bgpat) { + bg_image = TRUE; + have_bg = FALSE; + } else + ++error; + } + } else if (!strncmp(*argv, "-usleep", 2)) { + if (!*++argv) + ++error; + else { + usleep_duration = (ulg)atol(*argv); + demo_timing = TRUE; + } + } else if (!strncmp(*argv, "-pause", 2)) { + pause_after_pass = TRUE; + } else if (!strncmp(*argv, "-timing", 2)) { + timing = TRUE; +#ifdef FEATURE_LOOP + } else if (!strncmp(*argv, "-loop", 2)) { + loop = TRUE; + if (!argv[1] || !is_number(argv[1])) + loop_interval = 2; + else { + ++argv; + loop_interval = atol(*argv); + if (loop_interval < 0) + loop_interval = 2; + else if (loop_interval > 100000) /* bit more than one day */ + loop_interval = 100000; + } +#endif + } else { + if (**argv != '-') { + filename = *argv; + if (argv[1]) /* shouldn't be any more args after filename */ + ++error; + } else + ++error; /* not expecting any other options */ + } + } + + if (!filename) + ++error; + + + /* print usage screen if any errors up to this point */ + + if (error) { + fprintf(stderr, "\n%s %s: %s\n\n", PROGNAME, VERSION, appname); + readpng2_version_info(); + fprintf(stderr, "\n" + "Usage: %s [-display xdpy] [-gamma exp] [-bgcolor bg | -bgpat pat]\n" +#ifdef FEATURE_LOOP + " %*s [-usleep dur | -timing] [-pause] [-loop [sec]] file.png\n\n" +#else + " %*s [-usleep dur | -timing] [-pause] file.png\n\n" +#endif + " xdpy\tname of the target X display (e.g., ``hostname:0'')\n" + " exp \ttransfer-function exponent (``gamma'') of the display\n" + "\t\t system in floating-point format (e.g., ``%.1f''); equal\n" + "\t\t to the product of the lookup-table exponent (varies)\n" + "\t\t and the CRT exponent (usually 2.2); must be positive\n" + " bg \tdesired background color in 7-character hex RGB format\n" + "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" + "\t\t used with transparent images; overrides -bgpat\n" + " pat \tdesired background pattern number (0-%d); used with\n" + "\t\t transparent images; overrides -bgcolor\n" +#ifdef FEATURE_LOOP + " -loop\tloops through background images after initial display\n" + "\t\t is complete (depends on -bgpat)\n" + " sec \tseconds to display each background image (default = 2)\n" +#endif + " dur \tduration in microseconds to wait after displaying each\n" + "\t\t row (for demo purposes)\n" + " -timing\tenables delay for every block read, to simulate modem\n" + "\t\t download of image (~36 Kbps)\n" + " -pause\tpauses after displaying each pass until mouse clicked\n" + "\nPress Q, Esc or mouse button 1 (within image window, after image\n" + "is displayed) to quit.\n" + "\n", PROGNAME, + (int)strlen(PROGNAME), " ", default_display_exponent, num_bgpat-1); + exit(1); + } + + + if (!(infile = fopen(filename, "rb"))) { + fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); + ++error; + } else { + incount = fread(inbuf, 1, INBUFSIZE, infile); + if (incount < 8 || !readpng2_check_sig(inbuf, 8)) { + fprintf(stderr, PROGNAME + ": [%s] is not a PNG file: incorrect signature\n", + filename); + ++error; + } else if ((rc = readpng2_init(&rpng2_info)) != 0) { + switch (rc) { + case 2: + fprintf(stderr, PROGNAME + ": [%s] has bad IHDR (libpng longjmp)\n", filename); + break; + case 4: + fprintf(stderr, PROGNAME ": insufficient memory\n"); + break; + default: + fprintf(stderr, PROGNAME + ": unknown readpng2_init() error\n"); + break; + } + ++error; + } else { + Trace((stderr, "about to call XOpenDisplay()\n")) + display = XOpenDisplay(displayname); + if (!display) { + readpng2_cleanup(&rpng2_info); + fprintf(stderr, PROGNAME ": can't open X display [%s]\n", + displayname? displayname : "default"); + ++error; + } + } + if (error) + fclose(infile); + } + + + if (error) { + fprintf(stderr, PROGNAME ": aborting.\n"); + exit(2); + } + + + /* set the title-bar string, but make sure buffer doesn't overflow */ + + alen = strlen(appname); + flen = strlen(filename); + if (alen + flen + 3 > 1023) + sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); + else + sprintf(titlebar, "%s: %s", appname, filename); + + + /* set some final rpng2_info variables before entering main data loop */ + + if (have_bg) { + unsigned r, g, b; /* this approach quiets compiler warnings */ + + sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); + rpng2_info.bg_red = (uch)r; + rpng2_info.bg_green = (uch)g; + rpng2_info.bg_blue = (uch)b; + } else + rpng2_info.need_bgcolor = TRUE; + + rpng2_info.state = kPreInit; + rpng2_info.mainprog_init = rpng2_x_init; + rpng2_info.mainprog_display_row = rpng2_x_display_row; + rpng2_info.mainprog_finish_display = rpng2_x_finish_display; + + + /* OK, this is the fun part: call readpng2_decode_data() at the start of + * the loop to deal with our first buffer of data (read in above to verify + * that the file is a PNG image), then loop through the file and continue + * calling the same routine to handle each chunk of data. It in turn + * passes the data to libpng, which will invoke one or more of our call- + * backs as decoded data become available. We optionally call sleep() for + * one second per iteration to simulate downloading the image via an analog + * modem. */ + + for (;;) { + Trace((stderr, "about to call readpng2_decode_data()\n")) + if (readpng2_decode_data(&rpng2_info, inbuf, incount)) + ++error; + Trace((stderr, "done with readpng2_decode_data()\n")) + + if (error || incount != INBUFSIZE || rpng2_info.state == kDone) { + if (rpng2_info.state == kDone) { + Trace((stderr, "done decoding PNG image\n")) + } else if (ferror(infile)) { + fprintf(stderr, PROGNAME + ": error while reading PNG image file\n"); + exit(3); + } else if (feof(infile)) { + fprintf(stderr, PROGNAME ": end of file reached " + "(unexpectedly) while reading PNG image file\n"); + exit(3); + } else /* if (error) */ { + /* will print error message below */ + } + break; + } + + if (timing) + sleep(1); + + incount = fread(inbuf, 1, INBUFSIZE, infile); + } + + + /* clean up PNG stuff and report any decoding errors */ + + fclose(infile); + Trace((stderr, "about to call readpng2_cleanup()\n")) + readpng2_cleanup(&rpng2_info); + + if (error) { + fprintf(stderr, PROGNAME ": libpng error while decoding PNG image\n"); + exit(3); + } + + +#ifdef FEATURE_LOOP + + if (loop && bg_image) { + Trace((stderr, "entering -loop loop (FEATURE_LOOP)\n")) + for (;;) { + int i, use_sleep; + struct timeval now, then; + + /* get current time and add loop_interval to get target time */ + if (gettimeofday(&then, NULL) == 0) { + then.tv_sec += loop_interval; + use_sleep = FALSE; + } else + use_sleep = TRUE; + + /* do quick check for a quit event but don't wait for it */ + /* GRR BUG: should also check for Expose events and redraw... */ + if (XCheckMaskEvent(display, KeyPressMask | ButtonPressMask, &e)) + if (QUIT(e,k)) + break; + + /* generate next background image */ + if (++pat >= num_bgpat) + pat = 0; + rpng2_x_reload_bg_image(); + + /* wait for timeout, using whatever means are available */ + if (use_sleep || gettimeofday(&now, NULL) != 0) { + for (i = loop_interval; i > 0; --i) { + sleep(1); + /* GRR BUG: also need to check for Expose (and redraw!) */ + if (XCheckMaskEvent(display, KeyPressMask | ButtonPressMask, + &e) && QUIT(e,k)) + break; + } + } else { + /* Y2038 BUG! */ + if (now.tv_sec < then.tv_sec || + (now.tv_sec == then.tv_sec && now.tv_usec < then.tv_usec)) + { + int quit = FALSE; + long seconds_to_go = then.tv_sec - now.tv_sec; + long usleep_usec; + + /* basically chew up most of remaining loop-interval with + * calls to sleep(1) interleaved with checks for quit + * events, but also recalc time-to-go periodically; when + * done, clean up any remaining time with usleep() call + * (could also use SIGALRM, but signals are a pain...) */ + while (seconds_to_go-- > 1) { + int seconds_done = 0; + + for (i = seconds_to_go; i > 0 && !quit; --i) { + sleep(1); + /* GRR BUG: need to check for Expose and redraw */ + if (XCheckMaskEvent(display, KeyPressMask | + ButtonPressMask, &e) && QUIT(e,k)) + quit = TRUE; + if (++seconds_done > 1000) + break; /* time to redo seconds_to_go meas. */ + } + if (quit) + break; + + /* OK, more than 1000 seconds since last check: + * correct the time-to-go measurement for drift */ + if (gettimeofday(&now, NULL) == 0) { + if (now.tv_sec >= then.tv_sec) + break; + seconds_to_go = then.tv_sec - now.tv_sec; + } else + ++seconds_to_go; /* restore what we subtracted */ + } + if (quit) + break; /* breaks outer do-loop, skips redisplay */ + + /* since difference between "now" and "then" is already + * eaten up to within a couple of seconds, don't need to + * worry about overflow--but might have overshot (neg.) */ + if (gettimeofday(&now, NULL) == 0) { + usleep_usec = 1000000L*(then.tv_sec - now.tv_sec) + + then.tv_usec - now.tv_usec; + if (usleep_usec > 0) + usleep((ulg)usleep_usec); + } + } + } + + /* composite image against new background and display (note that + * we do not take into account the time spent doing this...) */ + rpng2_x_redisplay_image (0, 0, rpng2_info.width, rpng2_info.height); + } + + } else /* FALL THROUGH and do the normal thing */ + +#endif /* FEATURE_LOOP */ + + /* wait for the user to tell us when to quit */ + + if (rpng2_info.state >= kWindowInit) { + Trace((stderr, "entering final wait-for-quit-event loop\n")) + do { + XNextEvent(display, &e); + if (e.type == Expose) { + XExposeEvent *ex = (XExposeEvent *)&e; + rpng2_x_redisplay_image (ex->x, ex->y, ex->width, ex->height); + } + } while (!QUIT(e,k)); + } else { + fprintf(stderr, PROGNAME ": init callback never called: probable " + "libpng error while decoding PNG metadata\n"); + exit(4); + } + + + /* we're done: clean up all image and X resources and go away */ + + Trace((stderr, "about to call rpng2_x_cleanup()\n")) + rpng2_x_cleanup(); + + return 0; +} + + + + + +/* this function is called by readpng2_info_callback() in readpng2.c, which + * in turn is called by libpng after all of the pre-IDAT chunks have been + * read and processed--i.e., we now have enough info to finish initializing */ + +static void rpng2_x_init(void) +{ + ulg i; + ulg rowbytes = rpng2_info.rowbytes; + + Trace((stderr, "beginning rpng2_x_init()\n")) + Trace((stderr, " rowbytes = %d\n", rpng2_info.rowbytes)) + Trace((stderr, " width = %ld\n", rpng2_info.width)) + Trace((stderr, " height = %ld\n", rpng2_info.height)) + + rpng2_info.image_data = (uch *)malloc(rowbytes * rpng2_info.height); + if (!rpng2_info.image_data) { + readpng2_cleanup(&rpng2_info); + return; + } + + rpng2_info.row_pointers = (uch **)malloc(rpng2_info.height * sizeof(uch *)); + if (!rpng2_info.row_pointers) { + free(rpng2_info.image_data); + rpng2_info.image_data = NULL; + readpng2_cleanup(&rpng2_info); + return; + } + + for (i = 0; i < rpng2_info.height; ++i) + rpng2_info.row_pointers[i] = rpng2_info.image_data + i*rowbytes; + + + /* do the basic X initialization stuff, make the window, and fill it with + * the user-specified, file-specified or default background color or + * pattern */ + + if (rpng2_x_create_window()) { + + /* GRR TEMPORARY HACK: this is fundamentally no different from cases + * above; libpng should call our error handler to longjmp() back to us + * when png_ptr goes away. If we/it segfault instead, seems like a + * libpng bug... */ + + /* we're here via libpng callback, so if window fails, clean and bail */ + readpng2_cleanup(&rpng2_info); + rpng2_x_cleanup(); + exit(2); + } + + rpng2_info.state = kWindowInit; +} + + + + + +static int rpng2_x_create_window(void) +{ + ulg bg_red = rpng2_info.bg_red; + ulg bg_green = rpng2_info.bg_green; + ulg bg_blue = rpng2_info.bg_blue; + ulg bg_pixel = 0L; + ulg attrmask; + int need_colormap = FALSE; + int screen, pad; + uch *xdata; + Window root; + XEvent e; + XGCValues gcvalues; + XSetWindowAttributes attr; + XTextProperty windowName, *pWindowName = &windowName; + XTextProperty iconName, *pIconName = &iconName; + XVisualInfo visual_info; + XSizeHints *size_hints; + XWMHints *wm_hints; + XClassHint *class_hints; + + + Trace((stderr, "beginning rpng2_x_create_window()\n")) + + screen = DefaultScreen(display); + depth = DisplayPlanes(display, screen); + root = RootWindow(display, screen); + +#ifdef DEBUG + XSynchronize(display, True); +#endif + + if (depth != 16 && depth != 24 && depth != 32) { + int visuals_matched = 0; + + Trace((stderr, "default depth is %d: checking other visuals\n", + depth)) + + /* 24-bit first */ + visual_info.screen = screen; + visual_info.depth = 24; + visual_list = XGetVisualInfo(display, + VisualScreenMask | VisualDepthMask, &visual_info, &visuals_matched); + if (visuals_matched == 0) { +/* GRR: add 15-, 16- and 32-bit TrueColor visuals (also DirectColor?) */ + fprintf(stderr, "default screen depth %d not supported, and no" + " 24-bit visuals found\n", depth); + return 2; + } + Trace((stderr, "XGetVisualInfo() returned %d 24-bit visuals\n", + visuals_matched)) + visual = visual_list[0].visual; + depth = visual_list[0].depth; +/* + colormap_size = visual_list[0].colormap_size; + visual_class = visual->class; + visualID = XVisualIDFromVisual(visual); + */ + have_nondefault_visual = TRUE; + need_colormap = TRUE; + } else { + XMatchVisualInfo(display, screen, depth, TrueColor, &visual_info); + visual = visual_info.visual; + } + + RMask = visual->red_mask; + GMask = visual->green_mask; + BMask = visual->blue_mask; + +/* GRR: add/check 8-bit support */ + if (depth == 8 || need_colormap) { + colormap = XCreateColormap(display, root, visual, AllocNone); + if (!colormap) { + fprintf(stderr, "XCreateColormap() failed\n"); + return 2; + } + have_colormap = TRUE; + if (depth == 8) + bg_image = FALSE; /* gradient just wastes palette entries */ + } + if (depth == 15 || depth == 16) { + RShift = 15 - rpng2_x_msb(RMask); /* these are right-shifts */ + GShift = 15 - rpng2_x_msb(GMask); + BShift = 15 - rpng2_x_msb(BMask); + } else if (depth > 16) { + RShift = rpng2_x_msb(RMask) - 7; /* these are left-shifts */ + GShift = rpng2_x_msb(GMask) - 7; + BShift = rpng2_x_msb(BMask) - 7; + } + if (depth >= 15 && (RShift < 0 || GShift < 0 || BShift < 0)) { + fprintf(stderr, "rpng2 internal logic error: negative X shift(s)!\n"); + return 2; + } + +/*--------------------------------------------------------------------------- + Finally, create the window. + ---------------------------------------------------------------------------*/ + + attr.backing_store = Always; + attr.event_mask = ExposureMask | KeyPressMask | ButtonPressMask; + attrmask = CWBackingStore | CWEventMask; + if (have_nondefault_visual) { + attr.colormap = colormap; + attr.background_pixel = 0; + attr.border_pixel = 1; + attrmask |= CWColormap | CWBackPixel | CWBorderPixel; + } + + window = XCreateWindow(display, root, 0, 0, rpng2_info.width, + rpng2_info.height, 0, depth, InputOutput, visual, attrmask, &attr); + + if (window == None) { + fprintf(stderr, "XCreateWindow() failed\n"); + return 2; + } else + have_window = TRUE; + + if (depth == 8) + XSetWindowColormap(display, window, colormap); + + if (!XStringListToTextProperty(&window_name, 1, pWindowName)) + pWindowName = NULL; + if (!XStringListToTextProperty(&icon_name, 1, pIconName)) + pIconName = NULL; + + /* OK if either hints allocation fails; XSetWMProperties() allows NULLs */ + + if ((size_hints = XAllocSizeHints()) != NULL) { + /* window will not be resizable */ + size_hints->flags = PMinSize | PMaxSize; + size_hints->min_width = size_hints->max_width = (int)rpng2_info.width; + size_hints->min_height = size_hints->max_height = + (int)rpng2_info.height; + } + + if ((wm_hints = XAllocWMHints()) != NULL) { + wm_hints->initial_state = NormalState; + wm_hints->input = True; + /* wm_hints->icon_pixmap = icon_pixmap; */ + wm_hints->flags = StateHint | InputHint /* | IconPixmapHint */ ; + } + + if ((class_hints = XAllocClassHint()) != NULL) { + class_hints->res_name = res_name; + class_hints->res_class = res_class; + } + + XSetWMProperties(display, window, pWindowName, pIconName, NULL, 0, + size_hints, wm_hints, class_hints); + + /* various properties and hints no longer needed; free memory */ + if (pWindowName) + XFree(pWindowName->value); + if (pIconName) + XFree(pIconName->value); + if (size_hints) + XFree(size_hints); + if (wm_hints) + XFree(wm_hints); + if (class_hints) + XFree(class_hints); + + XMapWindow(display, window); + + gc = XCreateGC(display, window, 0, &gcvalues); + have_gc = TRUE; + +/*--------------------------------------------------------------------------- + Allocate memory for the X- and display-specific version of the image. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + xdata = (uch *)malloc(4*rpng2_info.width*rpng2_info.height); + pad = 32; + } else if (depth == 16) { + xdata = (uch *)malloc(2*rpng2_info.width*rpng2_info.height); + pad = 16; + } else /* depth == 8 */ { + xdata = (uch *)malloc(rpng2_info.width*rpng2_info.height); + pad = 8; + } + + if (!xdata) { + fprintf(stderr, PROGNAME ": unable to allocate image memory\n"); + return 4; + } + + ximage = XCreateImage(display, visual, depth, ZPixmap, 0, + (char *)xdata, rpng2_info.width, rpng2_info.height, pad, 0); + + if (!ximage) { + fprintf(stderr, PROGNAME ": XCreateImage() failed\n"); + free(xdata); + return 3; + } + + /* to avoid testing the byte order every pixel (or doubling the size of + * the drawing routine with a giant if-test), we arbitrarily set the byte + * order to MSBFirst and let Xlib worry about inverting things on little- + * endian machines (e.g., Linux/x86, old VAXen, etc.)--this is not the + * most efficient approach (the giant if-test would be better), but in + * the interest of clarity, we'll take the easy way out... */ + + ximage->byte_order = MSBFirst; + +/*--------------------------------------------------------------------------- + Fill window with the specified background color (default is black) or + faked "background image" (but latter is disabled if 8-bit; gradients + just waste palette entries). + ---------------------------------------------------------------------------*/ + + if (bg_image) + rpng2_x_load_bg_image(); /* resets bg_image if fails */ + + if (!bg_image) { + if (depth == 24 || depth == 32) { + bg_pixel = (bg_red << RShift) | + (bg_green << GShift) | + (bg_blue << BShift); + } else if (depth == 16) { + bg_pixel = (((bg_red << 8) >> RShift) & RMask) | + (((bg_green << 8) >> GShift) & GMask) | + (((bg_blue << 8) >> BShift) & BMask); + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + XSetForeground(display, gc, bg_pixel); + XFillRectangle(display, window, gc, 0, 0, rpng2_info.width, + rpng2_info.height); + } + +/*--------------------------------------------------------------------------- + Wait for first Expose event to do any drawing, then flush and return. + ---------------------------------------------------------------------------*/ + + do + XNextEvent(display, &e); + while (e.type != Expose || e.xexpose.count); + + XFlush(display); + + return 0; + +} /* end function rpng2_x_create_window() */ + + + + + +static int rpng2_x_load_bg_image(void) +{ + uch *src; + char *dest; + uch r1, r2, g1, g2, b1, b2; + uch r1_inv, r2_inv, g1_inv, g2_inv, b1_inv, b2_inv; + int k, hmax, max; + int xidx, yidx, yidx_max; + int even_odd_vert, even_odd_horiz, even_odd; + int invert_gradient2 = (bg[pat].type & 0x08); + int invert_column; + int ximage_rowbytes = ximage->bytes_per_line; + ulg i, row; + ulg pixel; + +/*--------------------------------------------------------------------------- + Allocate buffer for fake background image to be used with transparent + images; if this fails, revert to plain background color. + ---------------------------------------------------------------------------*/ + + bg_rowbytes = 3 * rpng2_info.width; + bg_data = (uch *)malloc(bg_rowbytes * rpng2_info.height); + if (!bg_data) { + fprintf(stderr, PROGNAME + ": unable to allocate memory for background image\n"); + bg_image = 0; + return 1; + } + + bgscale = (pat == 0)? 8 : bgscale_default; + yidx_max = bgscale - 1; + +/*--------------------------------------------------------------------------- + Vertical gradients (ramps) in NxN squares, alternating direction and + colors (N == bgscale). + ---------------------------------------------------------------------------*/ + + if ((bg[pat].type & 0x07) == 0) { + uch r1_min = rgb[bg[pat].rgb1_min].r; + uch g1_min = rgb[bg[pat].rgb1_min].g; + uch b1_min = rgb[bg[pat].rgb1_min].b; + uch r2_min = rgb[bg[pat].rgb2_min].r; + uch g2_min = rgb[bg[pat].rgb2_min].g; + uch b2_min = rgb[bg[pat].rgb2_min].b; + int r1_diff = rgb[bg[pat].rgb1_max].r - r1_min; + int g1_diff = rgb[bg[pat].rgb1_max].g - g1_min; + int b1_diff = rgb[bg[pat].rgb1_max].b - b1_min; + int r2_diff = rgb[bg[pat].rgb2_max].r - r2_min; + int g2_diff = rgb[bg[pat].rgb2_max].g - g2_min; + int b2_diff = rgb[bg[pat].rgb2_max].b - b2_min; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = (int)(row % bgscale); + even_odd_vert = (int)((row / bgscale) & 1); + + r1 = r1_min + (r1_diff * yidx) / yidx_max; + g1 = g1_min + (g1_diff * yidx) / yidx_max; + b1 = b1_min + (b1_diff * yidx) / yidx_max; + r1_inv = r1_min + (r1_diff * (yidx_max-yidx)) / yidx_max; + g1_inv = g1_min + (g1_diff * (yidx_max-yidx)) / yidx_max; + b1_inv = b1_min + (b1_diff * (yidx_max-yidx)) / yidx_max; + + r2 = r2_min + (r2_diff * yidx) / yidx_max; + g2 = g2_min + (g2_diff * yidx) / yidx_max; + b2 = b2_min + (b2_diff * yidx) / yidx_max; + r2_inv = r2_min + (r2_diff * (yidx_max-yidx)) / yidx_max; + g2_inv = g2_min + (g2_diff * (yidx_max-yidx)) / yidx_max; + b2_inv = b2_min + (b2_diff * (yidx_max-yidx)) / yidx_max; + + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + even_odd_horiz = (int)((i / bgscale) & 1); + even_odd = even_odd_vert ^ even_odd_horiz; + invert_column = + (even_odd_horiz && (bg[pat].type & 0x10)); + if (even_odd == 0) { /* gradient #1 */ + if (invert_column) { + *dest++ = r1_inv; + *dest++ = g1_inv; + *dest++ = b1_inv; + } else { + *dest++ = r1; + *dest++ = g1; + *dest++ = b1; + } + } else { /* gradient #2 */ + if ((invert_column && invert_gradient2) || + (!invert_column && !invert_gradient2)) + { + *dest++ = r2; /* not inverted or */ + *dest++ = g2; /* doubly inverted */ + *dest++ = b2; + } else { + *dest++ = r2_inv; + *dest++ = g2_inv; /* singly inverted */ + *dest++ = b2_inv; + } + } + } + } + +/*--------------------------------------------------------------------------- + Soft gradient-diamonds with scale = bgscale. Code contributed by Adam + M. Costello. + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 1) { + + hmax = (bgscale-1)/2; /* half the max weight of a color */ + max = 2*hmax; /* the max weight of a color */ + + r1 = rgb[bg[pat].rgb1_max].r; + g1 = rgb[bg[pat].rgb1_max].g; + b1 = rgb[bg[pat].rgb1_max].b; + r2 = rgb[bg[pat].rgb2_max].r; + g2 = rgb[bg[pat].rgb2_max].g; + b2 = rgb[bg[pat].rgb2_max].b; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = (int)(row % bgscale); + if (yidx > hmax) + yidx = bgscale-1 - yidx; + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + xidx = (int)(i % bgscale); + if (xidx > hmax) + xidx = bgscale-1 - xidx; + k = xidx + yidx; + *dest++ = (k*r1 + (max-k)*r2) / max; + *dest++ = (k*g1 + (max-k)*g2) / max; + *dest++ = (k*b1 + (max-k)*b2) / max; + } + } + +/*--------------------------------------------------------------------------- + Radial "starburst" with azimuthal sinusoids; [eventually number of sinu- + soids will equal bgscale?]. This one is slow but very cool. Code con- + tributed by Pieter S. van der Meulen (originally in Smalltalk). + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 2) { + uch ch; + int ii, x, y, hw, hh, grayspot; + double freq, rotate, saturate, gray, intensity; + double angle=0.0, aoffset=0.0, maxDist, dist; + double red=0.0, green=0.0, blue=0.0, hue, s, v, f, p, q, t; + + fprintf(stderr, "%s: computing radial background...", + PROGNAME); + fflush(stderr); + + hh = (int)(rpng2_info.height / 2); + hw = (int)(rpng2_info.width / 2); + + /* variables for radial waves: + * aoffset: number of degrees to rotate hue [CURRENTLY NOT USED] + * freq: number of color beams originating from the center + * grayspot: size of the graying center area (anti-alias) + * rotate: rotation of the beams as a function of radius + * saturate: saturation of beams' shape azimuthally + */ + angle = CLIP(angle, 0.0, 360.0); + grayspot = CLIP(bg[pat].bg_gray, 1, (hh + hw)); + freq = MAX((double)bg[pat].bg_freq, 0.0); + saturate = (double)bg[pat].bg_bsat * 0.1; + rotate = (double)bg[pat].bg_brot * 0.1; + gray = 0.0; + intensity = 0.0; + maxDist = (double)((hw*hw) + (hh*hh)); + + for (row = 0; row < rpng2_info.height; ++row) { + y = (int)(row - hh); + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + x = (int)(i - hw); + angle = (x == 0)? PI_2 : atan((double)y / (double)x); + gray = (double)MAX(ABS(y), ABS(x)) / grayspot; + gray = MIN(1.0, gray); + dist = (double)((x*x) + (y*y)) / maxDist; + intensity = cos((angle+(rotate*dist*PI)) * freq) * + gray * saturate; + intensity = (MAX(MIN(intensity,1.0),-1.0) + 1.0) * 0.5; + hue = (angle + PI) * INV_PI_360 + aoffset; + s = gray * ((double)(ABS(x)+ABS(y)) / (double)(hw + hh)); + s = MIN(MAX(s,0.0), 1.0); + v = MIN(MAX(intensity,0.0), 1.0); + + if (s == 0.0) { + ch = (uch)(v * 255.0); + *dest++ = ch; + *dest++ = ch; + *dest++ = ch; + } else { + if ((hue < 0.0) || (hue >= 360.0)) + hue -= (((int)(hue / 360.0)) * 360.0); + hue /= 60.0; + ii = (int)hue; + f = hue - (double)ii; + p = (1.0 - s) * v; + q = (1.0 - (s * f)) * v; + t = (1.0 - (s * (1.0 - f))) * v; + if (ii == 0) { red = v; green = t; blue = p; } + else if (ii == 1) { red = q; green = v; blue = p; } + else if (ii == 2) { red = p; green = v; blue = t; } + else if (ii == 3) { red = p; green = q; blue = v; } + else if (ii == 4) { red = t; green = p; blue = v; } + else if (ii == 5) { red = v; green = p; blue = q; } + *dest++ = (uch)(red * 255.0); + *dest++ = (uch)(green * 255.0); + *dest++ = (uch)(blue * 255.0); + } + } + } + fprintf(stderr, "done.\n"); + fflush(stderr); + } + +/*--------------------------------------------------------------------------- + Blast background image to display buffer before beginning PNG decode. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + ulg red, green, blue; + int bpp = ximage->bits_per_pixel; + + for (row = 0; row < rpng2_info.height; ++row) { + src = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (bpp == 32) { /* slightly optimized version */ + for (i = rpng2_info.width; i > 0; --i) { + red = *src++; + green = *src++; + blue = *src++; + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } else { + for (i = rpng2_info.width; i > 0; --i) { + red = *src++; + green = *src++; + blue = *src++; + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + /* GRR BUG? this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift, RMask, etc.) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + } + + } else if (depth == 16) { + ush red, green, blue; + + for (row = 0; row < rpng2_info.height; ++row) { + src = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + for (i = rpng2_info.width; i > 0; --i) { + red = ((ush)(*src) << 8); ++src; + green = ((ush)(*src) << 8); ++src; + blue = ((ush)(*src) << 8); ++src; + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + + XPutImage(display, window, gc, ximage, 0, 0, 0, 0, rpng2_info.width, + rpng2_info.height); + + return 0; + +} /* end function rpng2_x_load_bg_image() */ + + + + + +static void rpng2_x_display_row(ulg row) +{ + uch bg_red = rpng2_info.bg_red; + uch bg_green = rpng2_info.bg_green; + uch bg_blue = rpng2_info.bg_blue; + uch *src, *src2=NULL; + char *dest; + uch r, g, b, a; + int ximage_rowbytes = ximage->bytes_per_line; + ulg i, pixel; + static int rows=0, prevpass=(-1); + static ulg firstrow; + +/*--------------------------------------------------------------------------- + rows and firstrow simply track how many rows (and which ones) have not + yet been displayed; alternatively, we could call XPutImage() for every + row and not bother with the records-keeping. + ---------------------------------------------------------------------------*/ + + Trace((stderr, "beginning rpng2_x_display_row()\n")) + + if (rpng2_info.pass != prevpass) { + if (pause_after_pass && rpng2_info.pass > 0) { + XEvent e; + KeySym k; + + fprintf(stderr, + "%s: end of pass %d of 7; click in image window to continue\n", + PROGNAME, prevpass + 1); + do + XNextEvent(display, &e); + while (!QUIT(e,k)); + } + fprintf(stderr, "%s: pass %d of 7\r", PROGNAME, rpng2_info.pass + 1); + fflush(stderr); + prevpass = rpng2_info.pass; + } + + if (rows == 0) + firstrow = row; /* first row that is not yet displayed */ + + ++rows; /* count of rows received but not yet displayed */ + +/*--------------------------------------------------------------------------- + Aside from the use of the rpng2_info struct, the lack of an outer loop + (over rows) and moving the XPutImage() call outside the "if (depth)" + tests, this routine is identical to rpng_x_display_image() in the non- + progressive version of the program. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + ulg red, green, blue; + int bpp = ximage->bits_per_pixel; + + src = rpng2_info.image_data + row*rpng2_info.rowbytes; + if (bg_image) + src2 = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (rpng2_info.channels == 3) { + for (i = rpng2_info.width; i > 0; --i) { + red = *src++; + green = *src++; + blue = *src++; + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* GRR BUG? this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift, RMask, etc.) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + } else /* if (rpng2_info.channels == 4) */ { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (bg_image) { + bg_red = *src2++; + bg_green = *src2++; + bg_blue = *src2++; + } + if (a == 255) { + red = r; + green = g; + blue = b; + } else if (a == 0) { + red = bg_red; + green = bg_green; + blue = bg_blue; + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result into the + * first argument */ + alpha_composite(red, r, a, bg_red); + alpha_composite(green, g, a, bg_green); + alpha_composite(blue, b, a, bg_blue); + } + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* GRR BUG? this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift, RMask, etc.) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + } + + } else if (depth == 16) { + ush red, green, blue; + + src = rpng2_info.row_pointers[row]; + if (bg_image) + src2 = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (rpng2_info.channels == 3) { + for (i = rpng2_info.width; i > 0; --i) { + red = ((ush)(*src) << 8); + ++src; + green = ((ush)(*src) << 8); + ++src; + blue = ((ush)(*src) << 8); + ++src; + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } else /* if (rpng2_info.channels == 4) */ { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (bg_image) { + bg_red = *src2++; + bg_green = *src2++; + bg_blue = *src2++; + } + if (a == 255) { + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } else if (a == 0) { + red = ((ush)bg_red << 8); + green = ((ush)bg_green << 8); + blue = ((ush)bg_blue << 8); + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result back into + * the first argument (== fg byte here: safe) */ + alpha_composite(r, r, a, bg_red); + alpha_composite(g, g, a, bg_green); + alpha_composite(b, b, a, bg_blue); + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + + +/*--------------------------------------------------------------------------- + Display after every 16 rows or when on one of last two rows. (Region + may include previously displayed lines due to interlacing--i.e., not + contiguous. Also, second-to-last row is final one in interlaced images + with odd number of rows.) For demos, flush (and delay) after every 16th + row so "sparse" passes don't go twice as fast. + ---------------------------------------------------------------------------*/ + + if (demo_timing && (row - firstrow >= 16 || row >= rpng2_info.height-2)) { + XPutImage(display, window, gc, ximage, 0, (int)firstrow, 0, + (int)firstrow, rpng2_info.width, row - firstrow + 1); + XFlush(display); + rows = 0; + usleep(usleep_duration); + } else + if (!demo_timing && ((rows & 0xf) == 0 || row >= rpng2_info.height-2)) { + XPutImage(display, window, gc, ximage, 0, (int)firstrow, 0, + (int)firstrow, rpng2_info.width, row - firstrow + 1); + XFlush(display); + rows = 0; + } + +} + + + + + +static void rpng2_x_finish_display(void) +{ + Trace((stderr, "beginning rpng2_x_finish_display()\n")) + + /* last row has already been displayed by rpng2_x_display_row(), so we + * have nothing to do here except set a flag and let the user know that + * the image is done */ + + rpng2_info.state = kDone; + printf( + "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n"); + fflush(stdout); +} + + + + + +static void rpng2_x_redisplay_image(ulg startcol, ulg startrow, + ulg width, ulg height) +{ + uch bg_red = rpng2_info.bg_red; + uch bg_green = rpng2_info.bg_green; + uch bg_blue = rpng2_info.bg_blue; + uch *src, *src2=NULL; + char *dest; + uch r, g, b, a; + ulg i, row, lastrow = 0; + ulg pixel; + int ximage_rowbytes = ximage->bytes_per_line; + + + Trace((stderr, "beginning display loop (image_channels == %d)\n", + rpng2_info.channels)) + Trace((stderr, " (width = %ld, rowbytes = %d, ximage_rowbytes = %d)\n", + rpng2_info.width, rpng2_info.rowbytes, ximage_rowbytes)) + Trace((stderr, " (bpp = %d)\n", ximage->bits_per_pixel)) + Trace((stderr, " (byte_order = %s)\n", ximage->byte_order == MSBFirst? + "MSBFirst" : (ximage->byte_order == LSBFirst? "LSBFirst" : "unknown"))) + +/*--------------------------------------------------------------------------- + Aside from the use of the rpng2_info struct and of src2 (for background + image), this routine is identical to rpng_x_display_image() in the non- + progressive version of the program--for the simple reason that redisplay + of the image against a new background happens after the image is fully + decoded and therefore is, by definition, non-progressive. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + ulg red, green, blue; + int bpp = ximage->bits_per_pixel; + + for (lastrow = row = startrow; row < startrow+height; ++row) { + src = rpng2_info.image_data + row*rpng2_info.rowbytes; + if (bg_image) + src2 = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (rpng2_info.channels == 3) { + for (i = rpng2_info.width; i > 0; --i) { + red = *src++; + green = *src++; + blue = *src++; +#ifdef NO_24BIT_MASKS + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift, RMask, etc.) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } +#else + red = (RShift < 0)? red << (-RShift) : red >> RShift; + green = (GShift < 0)? green << (-GShift) : green >> GShift; + blue = (BShift < 0)? blue << (-BShift) : blue >> BShift; + pixel = (red & RMask) | (green & GMask) | (blue & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* GRR BUG */ + /* this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift/RMask/etc. here, too) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } +#endif + } + + } else /* if (rpng2_info.channels == 4) */ { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (bg_image) { + bg_red = *src2++; + bg_green = *src2++; + bg_blue = *src2++; + } + if (a == 255) { + red = r; + green = g; + blue = b; + } else if (a == 0) { + red = bg_red; + green = bg_green; + blue = bg_blue; + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result into the + * first argument */ + alpha_composite(red, r, a, bg_red); + alpha_composite(green, g, a, bg_green); + alpha_composite(blue, b, a, bg_blue); + } +#ifdef NO_24BIT_MASKS + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift, RMask, etc.) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } +#else + red = (RShift < 0)? red << (-RShift) : red >> RShift; + green = (GShift < 0)? green << (-GShift) : green >> GShift; + blue = (BShift < 0)? blue << (-BShift) : blue >> BShift; + pixel = (red & RMask) | (green & GMask) | (blue & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* GRR BUG */ + /* this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift/RMask/etc. here, too) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } +#endif + } + } + /* display after every 16 lines */ + if (((row+1) & 0xf) == 0) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, rpng2_info.width, 16); + XFlush(display); + lastrow = row + 1; + } + } + + } else if (depth == 16) { + ush red, green, blue; + + for (lastrow = row = startrow; row < startrow+height; ++row) { + src = rpng2_info.row_pointers[row]; + if (bg_image) + src2 = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (rpng2_info.channels == 3) { + for (i = rpng2_info.width; i > 0; --i) { + red = ((ush)(*src) << 8); + ++src; + green = ((ush)(*src) << 8); + ++src; + blue = ((ush)(*src) << 8); + ++src; + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } else /* if (rpng2_info.channels == 4) */ { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (bg_image) { + bg_red = *src2++; + bg_green = *src2++; + bg_blue = *src2++; + } + if (a == 255) { + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } else if (a == 0) { + red = ((ush)bg_red << 8); + green = ((ush)bg_green << 8); + blue = ((ush)bg_blue << 8); + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result back into + * the first argument (== fg byte here: safe) */ + alpha_composite(r, r, a, bg_red); + alpha_composite(g, g, a, bg_green); + alpha_composite(b, b, a, bg_blue); + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + /* display after every 16 lines */ + if (((row+1) & 0xf) == 0) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, rpng2_info.width, 16); + XFlush(display); + lastrow = row + 1; + } + } + + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + + Trace((stderr, "calling final XPutImage()\n")) + if (lastrow < startrow+height) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, rpng2_info.width, rpng2_info.height-lastrow); + XFlush(display); + } + +} /* end function rpng2_x_redisplay_image() */ + + + + + +#ifdef FEATURE_LOOP + +static void rpng2_x_reload_bg_image(void) +{ + char *dest; + uch r1, r2, g1, g2, b1, b2; + uch r1_inv, r2_inv, g1_inv, g2_inv, b1_inv, b2_inv; + int k, hmax, max; + int xidx, yidx, yidx_max; + int even_odd_vert, even_odd_horiz, even_odd; + int invert_gradient2 = (bg[pat].type & 0x08); + int invert_column; + ulg i, row; + + + bgscale = (pat == 0)? 8 : bgscale_default; + yidx_max = bgscale - 1; + +/*--------------------------------------------------------------------------- + Vertical gradients (ramps) in NxN squares, alternating direction and + colors (N == bgscale). + ---------------------------------------------------------------------------*/ + + if ((bg[pat].type & 0x07) == 0) { + uch r1_min = rgb[bg[pat].rgb1_min].r; + uch g1_min = rgb[bg[pat].rgb1_min].g; + uch b1_min = rgb[bg[pat].rgb1_min].b; + uch r2_min = rgb[bg[pat].rgb2_min].r; + uch g2_min = rgb[bg[pat].rgb2_min].g; + uch b2_min = rgb[bg[pat].rgb2_min].b; + int r1_diff = rgb[bg[pat].rgb1_max].r - r1_min; + int g1_diff = rgb[bg[pat].rgb1_max].g - g1_min; + int b1_diff = rgb[bg[pat].rgb1_max].b - b1_min; + int r2_diff = rgb[bg[pat].rgb2_max].r - r2_min; + int g2_diff = rgb[bg[pat].rgb2_max].g - g2_min; + int b2_diff = rgb[bg[pat].rgb2_max].b - b2_min; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = (int)(row % bgscale); + even_odd_vert = (int)((row / bgscale) & 1); + + r1 = r1_min + (r1_diff * yidx) / yidx_max; + g1 = g1_min + (g1_diff * yidx) / yidx_max; + b1 = b1_min + (b1_diff * yidx) / yidx_max; + r1_inv = r1_min + (r1_diff * (yidx_max-yidx)) / yidx_max; + g1_inv = g1_min + (g1_diff * (yidx_max-yidx)) / yidx_max; + b1_inv = b1_min + (b1_diff * (yidx_max-yidx)) / yidx_max; + + r2 = r2_min + (r2_diff * yidx) / yidx_max; + g2 = g2_min + (g2_diff * yidx) / yidx_max; + b2 = b2_min + (b2_diff * yidx) / yidx_max; + r2_inv = r2_min + (r2_diff * (yidx_max-yidx)) / yidx_max; + g2_inv = g2_min + (g2_diff * (yidx_max-yidx)) / yidx_max; + b2_inv = b2_min + (b2_diff * (yidx_max-yidx)) / yidx_max; + + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + even_odd_horiz = (int)((i / bgscale) & 1); + even_odd = even_odd_vert ^ even_odd_horiz; + invert_column = + (even_odd_horiz && (bg[pat].type & 0x10)); + if (even_odd == 0) { /* gradient #1 */ + if (invert_column) { + *dest++ = r1_inv; + *dest++ = g1_inv; + *dest++ = b1_inv; + } else { + *dest++ = r1; + *dest++ = g1; + *dest++ = b1; + } + } else { /* gradient #2 */ + if ((invert_column && invert_gradient2) || + (!invert_column && !invert_gradient2)) + { + *dest++ = r2; /* not inverted or */ + *dest++ = g2; /* doubly inverted */ + *dest++ = b2; + } else { + *dest++ = r2_inv; + *dest++ = g2_inv; /* singly inverted */ + *dest++ = b2_inv; + } + } + } + } + +/*--------------------------------------------------------------------------- + Soft gradient-diamonds with scale = bgscale. Code contributed by Adam + M. Costello. + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 1) { + + hmax = (bgscale-1)/2; /* half the max weight of a color */ + max = 2*hmax; /* the max weight of a color */ + + r1 = rgb[bg[pat].rgb1_max].r; + g1 = rgb[bg[pat].rgb1_max].g; + b1 = rgb[bg[pat].rgb1_max].b; + r2 = rgb[bg[pat].rgb2_max].r; + g2 = rgb[bg[pat].rgb2_max].g; + b2 = rgb[bg[pat].rgb2_max].b; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = (int)(row % bgscale); + if (yidx > hmax) + yidx = bgscale-1 - yidx; + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + xidx = (int)(i % bgscale); + if (xidx > hmax) + xidx = bgscale-1 - xidx; + k = xidx + yidx; + *dest++ = (k*r1 + (max-k)*r2) / max; + *dest++ = (k*g1 + (max-k)*g2) / max; + *dest++ = (k*b1 + (max-k)*b2) / max; + } + } + +/*--------------------------------------------------------------------------- + Radial "starburst" with azimuthal sinusoids; [eventually number of sinu- + soids will equal bgscale?]. This one is slow but very cool. Code con- + tributed by Pieter S. van der Meulen (originally in Smalltalk). + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 2) { + uch ch; + int ii, x, y, hw, hh, grayspot; + double freq, rotate, saturate, gray, intensity; + double angle=0.0, aoffset=0.0, maxDist, dist; + double red=0.0, green=0.0, blue=0.0, hue, s, v, f, p, q, t; + + hh = (int)(rpng2_info.height / 2); + hw = (int)(rpng2_info.width / 2); + + /* variables for radial waves: + * aoffset: number of degrees to rotate hue [CURRENTLY NOT USED] + * freq: number of color beams originating from the center + * grayspot: size of the graying center area (anti-alias) + * rotate: rotation of the beams as a function of radius + * saturate: saturation of beams' shape azimuthally + */ + angle = CLIP(angle, 0.0, 360.0); + grayspot = CLIP(bg[pat].bg_gray, 1, (hh + hw)); + freq = MAX((double)bg[pat].bg_freq, 0.0); + saturate = (double)bg[pat].bg_bsat * 0.1; + rotate = (double)bg[pat].bg_brot * 0.1; + gray = 0.0; + intensity = 0.0; + maxDist = (double)((hw*hw) + (hh*hh)); + + for (row = 0; row < rpng2_info.height; ++row) { + y = (int)(row - hh); + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + x = (int)(i - hw); + angle = (x == 0)? PI_2 : atan((double)y / (double)x); + gray = (double)MAX(ABS(y), ABS(x)) / grayspot; + gray = MIN(1.0, gray); + dist = (double)((x*x) + (y*y)) / maxDist; + intensity = cos((angle+(rotate*dist*PI)) * freq) * + gray * saturate; + intensity = (MAX(MIN(intensity,1.0),-1.0) + 1.0) * 0.5; + hue = (angle + PI) * INV_PI_360 + aoffset; + s = gray * ((double)(ABS(x)+ABS(y)) / (double)(hw + hh)); + s = MIN(MAX(s,0.0), 1.0); + v = MIN(MAX(intensity,0.0), 1.0); + + if (s == 0.0) { + ch = (uch)(v * 255.0); + *dest++ = ch; + *dest++ = ch; + *dest++ = ch; + } else { + if ((hue < 0.0) || (hue >= 360.0)) + hue -= (((int)(hue / 360.0)) * 360.0); + hue /= 60.0; + ii = (int)hue; + f = hue - (double)ii; + p = (1.0 - s) * v; + q = (1.0 - (s * f)) * v; + t = (1.0 - (s * (1.0 - f))) * v; + if (ii == 0) { red = v; green = t; blue = p; } + else if (ii == 1) { red = q; green = v; blue = p; } + else if (ii == 2) { red = p; green = v; blue = t; } + else if (ii == 3) { red = p; green = q; blue = v; } + else if (ii == 4) { red = t; green = p; blue = v; } + else if (ii == 5) { red = v; green = p; blue = q; } + *dest++ = (uch)(red * 255.0); + *dest++ = (uch)(green * 255.0); + *dest++ = (uch)(blue * 255.0); + } + } + } + } + +} /* end function rpng2_x_reload_bg_image() */ + + + + + +static int is_number(char *p) +{ + while (*p) { + if (!isdigit(*p)) + return FALSE; + ++p; + } + return TRUE; +} + +#endif /* FEATURE_LOOP */ + + + + + +static void rpng2_x_cleanup(void) +{ + if (bg_image && bg_data) { + free(bg_data); + bg_data = NULL; + } + + if (rpng2_info.image_data) { + free(rpng2_info.image_data); + rpng2_info.image_data = NULL; + } + + if (rpng2_info.row_pointers) { + free(rpng2_info.row_pointers); + rpng2_info.row_pointers = NULL; + } + + if (ximage) { + if (ximage->data) { + free(ximage->data); /* we allocated it, so we free it */ + ximage->data = (char *)NULL; /* instead of XDestroyImage() */ + } + XDestroyImage(ximage); + ximage = NULL; + } + + if (have_gc) + XFreeGC(display, gc); + + if (have_window) + XDestroyWindow(display, window); + + if (have_colormap) + XFreeColormap(display, colormap); + + if (have_nondefault_visual) + XFree(visual_list); +} + + + + + +static int rpng2_x_msb(ulg u32val) +{ + int i; + + for (i = 31; i >= 0; --i) { + if (u32val & 0x80000000L) + break; + u32val <<= 1; + } + return i; +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/toucan.png b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/toucan.png new file mode 100644 index 0000000000000000000000000000000000000000..03960d4939938541ca3f8efee4bf13ffdecbb2f5 GIT binary patch literal 12901 zcma*NWpo@(vMt(@TFlH07Be$5GlRv<%*<@D#mr!V#mp>=(Xz$NEcMklbI#m(>%AXu zud1#cJ2EmWGkdMBijHVyMJYr$JU9RVfG8s^uKIZ``aIKNAOHX`!oF1CrvbDSQ4j%u zMHH|cr5gbN5CCO)b%{^?{|#6GI1B*%zje6(GU5NlRXmX=`N0_(A%xV>KIS3t$)QLv zQPAKaY!jf6!6DFKA+BP;aS(tXOVE|;Uwp<0CBPxek%2QX+9N}6AR78ggv z7y<(tDDvfVZh(LUCaDtRFhN+r_B0_*rDFZ%cgL7s9GZxYKaNytiAy8o< zK4ankJ;1+)_%uHc3!1etPoK|Y|FdGB%Ksn01O8|4J{$jgBVYkwFaQWRFz_wD zcdvi$%1u>K4FFaS4p9LFfgquvVL)(YupoHQKUfBRfZqSbKFR+@Ea>gi5dR;(-VdVC4xLbxrnJC%1@d03#v_sPy`DI z#TlfBgvIoM42mg1!!%U~fzbW3@x?JfxW%NBWH@-~(jYE^qPPz?TWuREkU7XeRz^L5 z)zI>vp=|&8_%|jKPuzGs^^^~C_x@J`fdc-aA1WYukOQ_TO;%<;MIbQ=x!`vn5GPw2 zDEZULr+>x^0FVG=#6{G-*3W$5xfh>5grL|M$^WKI4*jfQiPuZU9gHbtfkr=&WwSL% zv5i1cx)_WYB{v`4mr;p~|&T`^d9t;6jdFSmVAcQM70jBuR z?DCrr)rN21M1F^DwpOHf(0Mmq*4qpki|KZmt3(dweY4NV@07ejk{o^Dj1K4fcG!3) zmiU_>G75d9f^4;3ONXdK8*Syu3Oq-&Fs{+WHBQPe)5^eBia)QXHevUq^>0j=YYxq1 zB+txJ=r8k!mYI=D>GaJw4tvu-T~01;PbspQHcxpxJu_VUW+NH;R(d179U8i_FNCbA zwTha**o3-x!OATw-r&eCuV9z{C@*n8#^%rlbXQfCAf#?XG)O8QO22baFPc2fG>~X| zd~hg+BxsqcH*37}8-u?KBY`s-bLaVS8kzFrX8E&GN^6>mDhQ10CbQ3Lxi=&_;aGYt|XqdtN;~36;Z*~)4-@L|zt7WFJnPXDgMrr8A21>xD4=rh$ zx`f?YYcTI(hX3>x!gd7Bzll48xv8_uIG!QIPa7CH@SCu)u$W9qWmWB{dV;-)lU;gy zrZ~1WzKNTO9kl4yIfN7!cOx6JS>3&o@MfSeR}o<2s$6g5b~aL{=3Thj#yPk%H&T%k zMei>yxv*|_41?~8XXWyxJEjpdU9Ytvo!J9{E6bqAMJ|57^@09uM(LNqjWbvT z=vO{Z`o4IWFz~a-5L!6QqXIU&K;9!WpZ#muwl3C|aK~E3-!kGZ^AhQkMD- zNVB@qHx)LBh%*!J=)fRmn(Md1ij+BYU#uIq!iaudTOu^1NOBc$-e6LMS-%EXuu?gO zOO8z476;7!Q)fx5+da3Z(6O%^&*3B|=+Q5DhO92EIW?TE&H6}N&MUQ|`=)W~N5d8q zeZo`dV`JR*KInu?DgHw(6|6s=R?OM@9kyZPjJBuxf^aGV4I3B)NA54~PWJ?oeO+TU z0{6K^)5-3oX|(o{5Umk8vaAb^um_P!DySz0jftfY9h|BQHZ>4u};|3qQZ&8o^Qu2Et)yj?hmk6_-CjWtv)m5?}1ryI; z&^H#i94EsMvA(`WXZqyIvH9nNpGf%$l`VZgv`n88sQFF55!H0Cc~3rg(wXkcGw_{_ zt;m$MVBwIOexEax%UEk}WVC6%5bw}av9fyUw9l{+f9MLhh%5Jj&KmEsm);H3icisL z+BH8OoOg#*(ZqFs^_+l!;V2TmCV!|!p*b~q6ndvDZ!*IIy8@s%}mJCUoS%mJZR9PUZ3C~-fq zNGyCRYe}(mtu>VkSwi7p?PUWz@tDaz?rliToGWq!+wLxr-p|QvBv5N2^h&_+2R>4| zSwNGJj3cu3rVx(~Wp#6DW4pX2&+z+)@SO;q-lLMB9wnKp&kC;6Z%QCvUGyd zE!hf*uX~bfZv;Btn7@zV%#}1K^HDQ&bktgdP6xNgWpzIc&LS#DXeMRfB|v;|trpze z+7MrXq_F-Vi#&&2W9OHI_p1hh)qt~e1~(j;kQlT)9V(bPqf)j$z zh+EL~V@);)wPv${r7UT@SP;d1+<~o}_4oHzha%+wy6OGz4$ceX(s@_LQ_XE+*{_tj zzY;3hmCedgXs;rJ5L%^xZy81b(eV;PqG5~A8ND9{+ znpdmTKs1^HJ!GU-vo_A1TKW3%II9ZohSLBC=bn?VYBVL1=&QKCq~EIRCxQ^MOA4-4 zeyrWs#@9`2y+J3eb%aat*UPFrBZ%EW)7V5IHb?0ySbF1~QoQwTcNMxB`MKSZR)@qj zr>9I7O6k9U`NfuRLGux8qwmyq03Q48TZB$MnE2Pmo`|4J>K|qsf2ADZi*&y>sTtH` zgcG#o1~}93vpG(tHbJIM7d27Ss~Y;g1~`RAcQ1 z6(#w-bz8cbg=P#SG<0NSRAf|4L}K-42a-$7B^L25OH5?LeQ$2^$bIi;6>;V7W6HC^ zhxv2z!)0W!V+Y7@533S}kAfHDw_#;9tA4Q6qLcl^RqBN;suUJJMVm-Hx?4NAn+}g{ zK1BV_n@+Yco90byI|G;J4EXf`D85l{mgB{$JR?;=aC&dGU{>4TNic0e#d01+hgdP$wU^ zcY>MpA`HFEkY|R($Fb`U3ko-P6v;l)B&MWU#?}HjYHFt@j1l-jxWj*IYd8E?i@&Li zuJ`y`*M5O|v*qA;eOV9Xl1eA^%6t5?x|M{D+)6jQq9c{#!+>Qkeoo@)=61w-{#{{o zDLyWaUqHb3ZG;eF=Et*v9T@mM;TWHXqmS#Z=v!MLs1s?!oU_wi%JzLfUPXmcii$i2 z^RSRY<=lz9%yw)mPf{o=rE|XQV5LtNCI?n}F3ev)`DlT%IL!%hof=Ts7HQBvf?PV^;fC9Pa#k0m4 z0iVD6JFX>pIW9sid^x`xJhs-2!$YYE)mfh|Af?_y#0ONCv@-Yw)gAR%v=I6+)Zxfe zZ^`l)`sT|+Evh{0%F9P#Nx%uxO&oo_e8;&7f%pLQL*M|?8y~QWU|4E`ATAMhE#-dO zv1C7O%XKpi8wN|e%3$_I&7MpsirDxL&C$B@qIq{CBz-L%!J=!)?yu0~t|*vMpQlgO z{1cg~IZ?$9ECKiM=G6f^lViao;%gCOYinJ(*QGB`Z{xkge&b-gQ1gq@N(g%zlkold zww4RGYv&)!zlj-sCgSsUZ)KxQ#NF@n?mm;Z(CO=S*u_On(5(5ARFO(rioF-u6!R;m z-aPhEGlI)Wpl2^IHJ;xGynN_tJ3b}X;$CSnMY7kacWUnLdbU;S-xfV2FQU5wd;42C zPIfQsOI7$bC)97hpYG zlz*F)g1k>t`XksYBS%+CP{Ey4RI}IPda1}Urf)*4ftq2cwHG+%W>VFu7;#qNxYZ%# znlV8}R^QxJlmadtQ)<$5Sp!yvk&#x+JBwX{>H46_@7-EGXMpk0t|X6?c_I}m6lCDQh%|_WqE7pZnbDaOSEZ{Qa1( zpd{GG8=M>bx!l=@oF~R*YmSO~1S_ zC6>fb%f*}0tdeFNWXn=PyvU3&vtEjXB%Bab+Rd>=w`srb0lNO1)_RYzMWFhYs%Zbe=RE7wLoP2KrX)$=J*zBeGHnyS|-{Vs5h2MHbhaC(}d z=J@WzX`^$x5?gM86-h$OjheicqVrnZXUH&3!jtBABkcDuSR^r{z%;QGjZ#o@KeGGo z1@=wf31jmag{sS=3!?W%c`i35#roAw>4~ zWct=gq_&#udL!parJql4W&NpZmY((^WuJ;bi12}!p7~Oz%OYv4Z{X5!C%P`7Y#7pX zFEKqH6=7-KPUBn!7t0|XjOZ98{XHA)^p;(+yWnKWdXT(2E4EMy&+{keYd%b{&Dq}A zxwCBk?o#7~?dh~Qs{XobY82wh~kBrlN ze84+V1R&0b zr5x<+928i$UIrogsj|q!-?QbBXXWa+odPX26FTu0A(YisRrR^gd{PSbeX5OI!4S4w zk<|?j*uhK*7P7N#SbrTl_c11YTh`9fX>8-(G0>0^F~p+ckx5EV|H$P>JeTQ2O!f5W zA!T5=G`uHqjm4HSs^KtW=D?ulv|U*F4G#n#K-$rjECg!}V?X>oS9N>0FQQ zrQg9OM@6bAg$Jws@^zH$7w*#o9~#c+f|*Seqb7|lRsU_3q#r*t)&MrGP-)KUYvK|RYU60s1i{L9 z?5aBC9OH!hMVLkH7Rd-49Hc)r7NaY>TKqY30*7EWwf(b}ZSWg0L&4gSxLA4hyc!mv zHMXW};7c7h>z`=z;s$N1U*&^)*$#X&Yja7})v@x-f;JFXXU6t;b4!vYe>pnY36I|x z!Hi=^ZJWSk2CvqgX~LgrdwCR>Oije)+2Ix5@#HQFk{hRHY$tzqAYly*4Ux!akc*8% z%E>k&}il|nti(BY+KQ0vm0dtd?(fdo1|2P<~omUo%no*-)ni9 zZ@YG^EwV_|&kAemd9EHYIiIeCQJzErP} z7+uU-kDry@itDT}Zgz%OoSzgzl3UQ;szU|`tC}`C&!YE>JTFZ{Al?bzNx-G#S=&pZ z5N_35&;!qr3iq^sXx;q@Jl)d4^sFv%tTu9wy9n_Ho#|&7Ibrxw>Y8Tuyv;_#mVu5= z?US|P%N`)-Ql_+2e=SS5(A(r!~@AZ_st85|gSvyNRx;M*ChZ&bETRn=_sC_(31*z+ASqxYA5j~!7 zz+Z>95r=MK1&J5-92TeZ3%b?cJl9{4GQcLlhi$U4*St8lbI?cqP1(Zd>^6Jx;j`ax zBeid(n5O%%*FAC|1;2iO^fTLuc*^WV4TlSyGxPZ(oj!W|ckPt&@K2}QUwGE5^rC*m zQq2rK1HB)5oHLwA^kM_g;DW3Gm>czJ#{JogNO|IIo;_W~FJ^Dg6GCJi(BjjNK6YjH~xxza9vOb~g!o4Mv!P`6MP4{>zw z3QOeamD+0q;b?H)VE;DzCQqhoc7SYb<=ptC;{xq!<+t-%y8qlaE~lhuZhQ%UZuh-0 zH0QKKc+s{xSX^kk73{>Q+^;8*?$j{3r{!Kf%6@+<_%4DTGPBEfj}qitn~L1$3)xchji99_ z2Agl;!G5)&eh9QjmOZ^N;mbxRR(6Zmx>(Y?p2~#0aQJO+;^1InkN(O~Q$$6?u#%gM zV&lZb+HXAV>Qy%Xup;y3&E4y!ZeTNpVO-uR%VA5Snb-E+a$fW{CSP;2BxjA>oze05R;I6jvp6{YVU|d)H1wqYC zXjHVoD>iiFPCZyfWMK23~DDkHEtAH2vAH{N$^uK_)o0VnG?l;%lz0VD+A* zzdB&N3QJ0G2R$pNzU!x({!3dpr1IEkumm2jh`W}`3)^&s(1jsr>G&=7pC@;w7xZ#G z|3ReXWgvL)j4?`04TF~lK|)G; zBccI|GD3!Ob=%)dsQH1cn$Ka-*Ee^JVC)JENl4h^he0a=GP7?&yE!1jqK1csx*%S| z19T9v^E6c;tz+rWggSS9??Wfx6N+wm{%D*FX8=ekgkyQ|n*QhBe1cjl@)mJKs&qX+ zb7KdGo|}YsX0RA0q~*Jho^0&aQK+}Jj@Gj6$sQawJyy2Vhdc{e*{_TiD{UQyJS^7u z9<0x6+ZZiO$W2N?6$uKz((2WGirarxE?mDEAeoV*Tudz_#7qiwB z761LabLM+@L|Pz~_;9{~O$_3EQ5I3xo!me3(E=qMYw6`398}Qy>BMP;15DgQBA}#1 zIo%R^dNQqg7J}!6{Lkthp7*5^Mb+M!U%9k zqghj=LxtyYi#e+aKRDqr2z{71Ftf2BC+eare&&PBhmR@UM4i|G$zWfw;Opz^B*~J0)8@~4+69)@)}G(p#WrYV zAwQ^Nb_D9!VvwMMGUtBh+OuYop|wP*1>(}+8b6MkB;mX$<;8Pn0 zV>2Ee-+J-4q8J)7qEJw>;Ala=5{(#*t!jgRrg%DBz6!gjdLA#Gc11CaE71a)UfcQL z)tX%XEUFi*K1p%^+Fhq97tflx1fRef9SzvdmQgC;xr&yC5#C;9z~wtGXg9 zlQ(GYUi}smg#HCelqykcW}Jo1QSRo}653-Q%W}Aqnr19;H<_9{AA&F+7e`pCqYrHs z{Mp)Rna4+Db??9eDi<&$rL0t5N^tR7eMWC=pVh>jqwK<&0AOHZLK4bkOc~a}cSBRq@suj` zerx~C24D9&1$^i&l%?nkt~~{%`;x+<6=q$ORhIn#6p!$}G=1=Z&A1DK4Jk0m6>=jM z{SFt?oNELK!+_O>9@D76pR;Sz_iEq&&{n<`Hval4BX_W;s8kc93X6 zF?ZzbH=W@o@DoIk2sLkM-^{4Ko$yOUVuIzJZgSn3#xxyZLVD@9gNvbd^pDX!Mk(Qzoz~Ll&Lk6^sg%k(opS*J6~8ZC~*@ zX`n#qFn|-vf^Mo8P=?urCp^H$E-NwHKO7R-ySS(;>v#&AN|hj+ceZC6%C`k04xWV1L`+NyPfpY?5M z|8pE{@Ysf3zBf9J2u&?QUJiG2bJKJS(|VLCX5QE#lS_{+Z9`<${1}g);tZYH)#STd zSFVJI_aN@muVsB48|g!eiEkwW0k5k|!VC^xrHBCoIdDTkx<%(Zx^;X7J?jx%Q4WR3 z0Fb{dNBo$Mk}_%3w!)i~Ff5$iP+DA*frpAS4{Z_Pr_Yj?lS4+f@76}bsPru-2^0I> zBEwJNz-k*3LBgIOI_MNaQE=YBIQYsW!QY9j@ZEn`MguN(XrOSupJ!bi{ZKJmt|7Lx z?Z=O{F?$FVR(wLR0G%_-01}O^zq&eDo|2eylkDZ}MbkgRq^+x3tOcgzb zOLpmqwIeitcYohla(@T#f8-9$6eDEYujBDVdWs`$d&u9(c`;^A@WD}w+ZK9`Mj0z6 z&cl8Qn$sqepL1?06hZ;S!v$PcR}t6^~-ZC;1>Cip<+N{8R;|dG`qc zv}O9apixC}f+C3=zP>iCVJN_b$6Kn6^kqq*6D| zh=?F+p`PMSqJfi8Y6!MtVj=BMo-wkppKTyMeEAKrn)GyKdd3I`HMqR@>-mo4n`u(e z?9srF>*9ppD_#%OzUqmYzD~{;br8wP=AEtOLzT220VMZBtU5jVaA_O^ zA!DgPg=_t`TT;)Y`DWA_CQb3vv%6nr?+O$?x>?7>Ar+5 zC!}9KHDTUll=4wl7RJt*H0IMqKlAtV`w7^z$_Of|Y}=N*iPP?%8h(+~S{WhUgL+07 zIJspM`uT!&#KRSMd3^STKZZP^(-Vsr7Gj;fo*!{2M#GzP6UNTqNIUQt69f>qXxZ^R7~C`#}tLcUlLm@ z%iWH^ z!5JZ!+tjH37;J@$zqJ5CcLfDJGf82PGo>Wr?eFj;Q%UopnpXtD#=IkRP&D)fR{?`@ZrTF5J2u8d8$ z7|V=dAM?Pz?r)gxtUuh_jK-{Ermi*s63YH zOoPFjCR)xcE6Z9@)$WPnt2rmhN^1$;bxi9c@JQ6_=l$Z=2nqn7vlO=7;lftqEU>b7 zP`y;QAKt~$3fdMRwQyyrbjoWZ*_-lZTib@b_G^8w>6^xC_zs9hXLyZy@4f?i94Vhg z`!BZWtEj3qhtgoyA&>jk`(1$%ouJxvqG!0 z;rmd(r(?L^UAY)oU zys`^7JnJTs5R};PJSWaN88C?;PdnmaDM=a!1zoNcbpbaG+hGcl94!OhJ%Vrc24f;U zn_Ar}JZzz$!0y;;Y1zJn{$^u+&i~oNmc|vEiS2g>$XR~m>#$2Zjz>~vW)L}pVN~0O zkWxHP3etDfsNc>^j;ATZj0=K3X?K7z4btqW^>3qpOp zTOSwMqH{g(q$a2*3+opi_FD%d5&FH04&iWLu~Dw?Oh>ut`A!!_rZ|$ly(JY0I)s2wqK zs4lnwlPS|!tHWJv_E^z8kB}JPNDm0hMdTqBB*hvX9_C3Egx|)B7T~n+-zWR51WFF~ zykOM&Gvu7d%$jn>t}qXVw-0sCx)1l4)Uvd1>qy|xNZ2tzL7cugWy?lA5^(SCVm2*j-lF52V@ z+T%x*`0$QnzCi=sQ)sQE))$@5i!5n_%E;WVC-CQKJ}4QyFA?w54K&f~&R7^d6jIU6 zPj`1xfXC^L*Jscf-{V`m$+~`0;&)~W=mb49C_HNA&mUfMHzy)W1G*D==8R-$N%7Zr zbF6;+e6*#WbR$n3w-0m&PQ^MyQ7YqO`kFbBryEFO%AgS@5>jnOMe3u_t_d?%4X*TH z{5+BTylYAX%v=|+#TsxTno;spmmLhP@5DYGb;_LLVILP@C>fFS;v)~!tu~=`PTn(w z@kq2sccr}peszs_a|jf~@0}a(6)VWFA|VbDn}oBIbW&_Bdy?$OI#a2_7$wSqVNMW8 zQ7moec)LT|o}Km&ELgd(qU71jCs@!EQ?R)buGTAc`(&6qv-!Bwc!oQ3r~BS{UR<7w zzki8DO>^bD?$zuVE?6~FS0Elv9U$D^?!mf^V8)z$rNjVY%ID;{EdFzTiE1K=;e9QkgXl#UrL)nNm{m6wV0io`SMJnp7jViK_}}T?)OW`2<^`_|QGc(qUi8*gRgx z{-!?xiX#CoA7{3v@;VAO`^mfBIAxo(5^u@`?- z)!O(Kd=k9Yde7M2WlPxo!YWbUs9DH}eX_B<*m^qYN+4D&rZb3)BF-KJ&P71fPk}$O zJEdAJIYUf+tAU{x4?>CGnbMGE@jD1gHO+dQh(lR=O z916my +#include +#include +#include /* for jmpbuf declaration in writepng.h */ +#include + +#ifdef DOS_OS2_W32 +# include /* for isatty(), setmode() prototypes */ +# include /* O_BINARY for fdopen() without text translation */ +# ifdef __EMX__ +# ifndef getch +# define getch() _read_kbd(0, 1, 0) /* need getche() */ +# endif +# else /* !__EMX__ */ +# ifdef __GO32__ +# include +# define getch() getkey() /* GRR: need getche() */ +# else +# include /* for getche() console input */ +# endif +# endif /* ?__EMX__ */ +# define FGETS(buf,len,stream) dos_kbd_gets(buf,len) +#else +# include /* for isatty() prototype */ +# define FGETS fgets +#endif + +/* #define DEBUG : this enables the Trace() macros */ + +/* #define FORBID_LATIN1_CTRL : this requires the user to re-enter any + text that includes control characters discouraged by the PNG spec; text + that includes an escape character (27) must be re-entered regardless */ + +#include "writepng.h" /* typedefs, common macros, writepng prototypes */ + + + +/* local prototypes */ + +static int wpng_isvalid_latin1(uch *p, int len); +static void wpng_cleanup(void); + +#ifdef DOS_OS2_W32 + static char *dos_kbd_gets(char *buf, int len); +#endif + + + +static mainprog_info wpng_info; /* lone global */ + + + +int main(int argc, char **argv) +{ +#ifndef DOS_OS2_W32 + FILE *keybd; +#endif +#ifdef sgi + FILE *tmpfile; /* or we could just use keybd, since no overlap */ + char tmpline[80]; +#endif + char *inname = NULL, outname[256]; + char *p, pnmchar, pnmline[256]; + char *bgstr, *textbuf = NULL; + ulg rowbytes; + int rc, len = 0; + int error = 0; + int text = FALSE; + int maxval; + double LUT_exponent; /* just the lookup table */ + double CRT_exponent = 2.2; /* just the monitor */ + double default_display_exponent; /* whole display system */ + double default_gamma = 0.0; + + + wpng_info.infile = NULL; + wpng_info.outfile = NULL; + wpng_info.image_data = NULL; + wpng_info.row_pointers = NULL; + wpng_info.filter = FALSE; + wpng_info.interlaced = FALSE; + wpng_info.have_bg = FALSE; + wpng_info.have_time = FALSE; + wpng_info.have_text = 0; + wpng_info.gamma = 0.0; + + + /* First get the default value for our display-system exponent, i.e., + * the product of the CRT exponent and the exponent corresponding to + * the frame-buffer's lookup table (LUT), if any. If the PNM image + * looks correct on the user's display system, its file gamma is the + * inverse of this value. (Note that this is not an exhaustive list + * of LUT values--e.g., OpenStep has a lot of weird ones--but it should + * cover 99% of the current possibilities. This section must ensure + * that default_display_exponent is positive.) */ + +#if defined(NeXT) + /* third-party utilities can modify the default LUT exponent */ + LUT_exponent = 1.0 / 2.2; + /* + if (some_next_function_that_returns_gamma(&next_gamma)) + LUT_exponent = 1.0 / next_gamma; + */ +#elif defined(sgi) + LUT_exponent = 1.0 / 1.7; + /* there doesn't seem to be any documented function to + * get the "gamma" value, so we do it the hard way */ + tmpfile = fopen("/etc/config/system.glGammaVal", "r"); + if (tmpfile) { + double sgi_gamma; + + fgets(tmpline, 80, tmpfile); + fclose(tmpfile); + sgi_gamma = atof(tmpline); + if (sgi_gamma > 0.0) + LUT_exponent = 1.0 / sgi_gamma; + } +#elif defined(Macintosh) + LUT_exponent = 1.8 / 2.61; + /* + if (some_mac_function_that_returns_gamma(&mac_gamma)) + LUT_exponent = mac_gamma / 2.61; + */ +#else + LUT_exponent = 1.0; /* assume no LUT: most PCs */ +#endif + + /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ + default_display_exponent = LUT_exponent * CRT_exponent; + + + /* If the user has set the SCREEN_GAMMA environment variable as suggested + * (somewhat imprecisely) in the libpng documentation, use that; otherwise + * use the default value we just calculated. Either way, the user may + * override this via a command-line option. */ + + if ((p = getenv("SCREEN_GAMMA")) != NULL) { + double exponent = atof(p); + + if (exponent > 0.0) + default_gamma = 1.0 / exponent; + } + + if (default_gamma == 0.0) + default_gamma = 1.0 / default_display_exponent; + + + /* Now parse the command line for options and the PNM filename. */ + + while (*++argv && !error) { + if (!strncmp(*argv, "-i", 2)) { + wpng_info.interlaced = TRUE; + } else if (!strncmp(*argv, "-time", 3)) { + wpng_info.modtime = time(NULL); + wpng_info.have_time = TRUE; + } else if (!strncmp(*argv, "-text", 3)) { + text = TRUE; + } else if (!strncmp(*argv, "-gamma", 2)) { + if (!*++argv) + ++error; + else { + wpng_info.gamma = atof(*argv); + if (wpng_info.gamma <= 0.0) + ++error; + else if (wpng_info.gamma > 1.01) + fprintf(stderr, PROGNAME + " warning: file gammas are usually less than 1.0\n"); + } + } else if (!strncmp(*argv, "-bgcolor", 4)) { + if (!*++argv) + ++error; + else { + bgstr = *argv; + if (strlen(bgstr) != 7 || bgstr[0] != '#') + ++error; + else { + unsigned r, g, b; /* this way quiets compiler warnings */ + + sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); + wpng_info.bg_red = (uch)r; + wpng_info.bg_green = (uch)g; + wpng_info.bg_blue = (uch)b; + wpng_info.have_bg = TRUE; + } + } + } else { + if (**argv != '-') { + inname = *argv; + if (argv[1]) /* shouldn't be any more args after filename */ + ++error; + } else + ++error; /* not expecting any other options */ + } + } + + + /* open the input and output files, or register an error and abort */ + + if (!inname) { + if (isatty(0)) { + fprintf(stderr, PROGNAME + ": must give input filename or provide image data via stdin\n"); + ++error; + } else { +#ifdef DOS_OS2_W32 + /* some buggy C libraries require BOTH setmode() and fdopen(bin) */ + setmode(fileno(stdin), O_BINARY); + setmode(fileno(stdout), O_BINARY); +#endif + if ((wpng_info.infile = fdopen(fileno(stdin), "rb")) == NULL) { + fprintf(stderr, PROGNAME + ": unable to reopen stdin in binary mode\n"); + ++error; + } else + if ((wpng_info.outfile = fdopen(fileno(stdout), "wb")) == NULL) { + fprintf(stderr, PROGNAME + ": unable to reopen stdout in binary mode\n"); + fclose(wpng_info.infile); + ++error; + } else + wpng_info.filter = TRUE; + } + } else if ((len = strlen(inname)) > 250) { + fprintf(stderr, PROGNAME ": input filename is too long [%d chars]\n", + len); + ++error; + } else if (!(wpng_info.infile = fopen(inname, "rb"))) { + fprintf(stderr, PROGNAME ": can't open input file [%s]\n", inname); + ++error; + } + + if (!error) { + fgets(pnmline, 256, wpng_info.infile); + if (pnmline[0] != 'P' || ((pnmchar = pnmline[1]) != '5' && + pnmchar != '6' && pnmchar != '8')) + { + fprintf(stderr, PROGNAME + ": input file [%s] is not a binary PGM, PPM or PAM file\n", + inname); + ++error; + } else { + wpng_info.pnmtype = (int)(pnmchar - '0'); + if (wpng_info.pnmtype != 8) + wpng_info.have_bg = FALSE; /* no need for bg if opaque */ + do { + fgets(pnmline, 256, wpng_info.infile); /* lose any comments */ + } while (pnmline[0] == '#'); + sscanf(pnmline, "%ld %ld", &wpng_info.width, &wpng_info.height); + do { + fgets(pnmline, 256, wpng_info.infile); /* more comment lines */ + } while (pnmline[0] == '#'); + sscanf(pnmline, "%d", &maxval); + if (wpng_info.width <= 0L || wpng_info.height <= 0L || + maxval != 255) + { + fprintf(stderr, PROGNAME + ": only positive width/height, maxval == 255 allowed \n"); + ++error; + } + wpng_info.sample_depth = 8; /* <==> maxval 255 */ + + if (!wpng_info.filter) { + /* make outname from inname */ + if ((p = strrchr(inname, '.')) == NULL || + (p - inname) != (len - 4)) + { + strcpy(outname, inname); + strcpy(outname+len, ".png"); + } else { + len -= 4; + strncpy(outname, inname, len); + strcpy(outname+len, ".png"); + } + /* check if outname already exists; if not, open */ + if ((wpng_info.outfile = fopen(outname, "rb")) != NULL) { + fprintf(stderr, PROGNAME ": output file exists [%s]\n", + outname); + fclose(wpng_info.outfile); + ++error; + } else if (!(wpng_info.outfile = fopen(outname, "wb"))) { + fprintf(stderr, PROGNAME ": can't open output file [%s]\n", + outname); + ++error; + } + } + } + if (error) { + fclose(wpng_info.infile); + wpng_info.infile = NULL; + if (wpng_info.filter) { + fclose(wpng_info.outfile); + wpng_info.outfile = NULL; + } + } + } + + + /* if we had any errors, print usage and die horrible death...arrr! */ + + if (error) { + fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, APPNAME); + writepng_version_info(); + fprintf(stderr, "\n" +"Usage: %s [-gamma exp] [-bgcolor bg] [-text] [-time] [-interlace] pnmfile\n" +"or: ... | %s [-gamma exp] [-bgcolor bg] [-text] [-time] [-interlace] | ...\n" + " exp \ttransfer-function exponent (``gamma'') of the image in\n" + "\t\t floating-point format (e.g., ``%.5f''); if image looks\n" + "\t\t correct on given display system, image gamma is equal to\n" + "\t\t inverse of display-system exponent, i.e., 1 / (LUT * CRT)\n" + "\t\t (where LUT = lookup-table exponent and CRT = CRT exponent;\n" + "\t\t first varies, second is usually 2.2, all are positive)\n" + " bg \tdesired background color for alpha-channel images, in\n" + "\t\t 7-character hex RGB format (e.g., ``#ff7700'' for orange:\n" + "\t\t same as HTML colors)\n" + " -text\tprompt interactively for text info (tEXt chunks)\n" + " -time\tinclude a tIME chunk (last modification time)\n" + " -interlace\twrite interlaced PNG image\n" + "\n" +"pnmfile or stdin must be a binary PGM (`P5'), PPM (`P6') or (extremely\n" +"unofficial and unsupported!) PAM (`P8') file. Currently it is required\n" +"to have maxval == 255 (i.e., no scaling). If pnmfile is specified, it\n" +"is converted to the corresponding PNG file with the same base name but a\n" +"``.png'' extension; files read from stdin are converted and sent to stdout.\n" +"The conversion is progressive (low memory usage) unless interlacing is\n" +"requested; in that case the whole image will be buffered in memory and\n" +"written in one call.\n" + "\n", PROGNAME, PROGNAME, default_gamma); + exit(1); + } + + + /* prepare the text buffers for libpng's use; note that even though + * PNG's png_text struct includes a length field, we don't have to fill + * it out */ + + if (text && +#ifndef DOS_OS2_W32 + (keybd = fdopen(fileno(stderr), "r")) != NULL && +#endif + (textbuf = (char *)malloc((5 + 9)*75)) != NULL) + { + int i, valid, result; + + fprintf(stderr, + "Enter text info (no more than 72 characters per line);\n"); + fprintf(stderr, "to skip a field, hit the key.\n"); + /* note: just leaves len == 1 */ + + do { + valid = TRUE; + p = textbuf + TEXT_TITLE_OFFSET; + fprintf(stderr, " Title: "); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { + if (p[len-1] == '\n') + p[--len] = '\0'; + wpng_info.title = p; + wpng_info.have_text |= TEXT_TITLE; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_TITLE; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_TITLE; + valid = FALSE; + } +#endif + } + } + } while (!valid); + + do { + valid = TRUE; + p = textbuf + TEXT_AUTHOR_OFFSET; + fprintf(stderr, " Author: "); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { + if (p[len-1] == '\n') + p[--len] = '\0'; + wpng_info.author = p; + wpng_info.have_text |= TEXT_AUTHOR; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_AUTHOR; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_AUTHOR; + valid = FALSE; + } +#endif + } + } + } while (!valid); + + do { + valid = TRUE; + p = textbuf + TEXT_DESC_OFFSET; + fprintf(stderr, " Description (up to 9 lines):\n"); + for (i = 1; i < 10; ++i) { + fprintf(stderr, " [%d] ", i); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) + p += len; /* now points at NULL; char before is newline */ + else + break; + } + if ((len = p - (textbuf + TEXT_DESC_OFFSET)) > 1) { + if (p[-1] == '\n') { + p[-1] = '\0'; + --len; + } + wpng_info.desc = textbuf + TEXT_DESC_OFFSET; + wpng_info.have_text |= TEXT_DESC; + p = textbuf + TEXT_DESC_OFFSET; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_DESC; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_DESC; + valid = FALSE; + } +#endif + } + } + } while (!valid); + + do { + valid = TRUE; + p = textbuf + TEXT_COPY_OFFSET; + fprintf(stderr, " Copyright: "); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { + if (p[len-1] == '\n') + p[--len] = '\0'; + wpng_info.copyright = p; + wpng_info.have_text |= TEXT_COPY; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_COPY; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_COPY; + valid = FALSE; + } +#endif + } + } + } while (!valid); + + do { + valid = TRUE; + p = textbuf + TEXT_EMAIL_OFFSET; + fprintf(stderr, " E-mail: "); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { + if (p[len-1] == '\n') + p[--len] = '\0'; + wpng_info.email = p; + wpng_info.have_text |= TEXT_EMAIL; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_EMAIL; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_EMAIL; + valid = FALSE; + } +#endif + } + } + } while (!valid); + + do { + valid = TRUE; + p = textbuf + TEXT_URL_OFFSET; + fprintf(stderr, " URL: "); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { + if (p[len-1] == '\n') + p[--len] = '\0'; + wpng_info.url = p; + wpng_info.have_text |= TEXT_URL; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_URL; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_URL; + valid = FALSE; + } +#endif + } + } + } while (!valid); + +#ifndef DOS_OS2_W32 + fclose(keybd); +#endif + + } else if (text) { + fprintf(stderr, PROGNAME ": unable to allocate memory for text\n"); + text = FALSE; + wpng_info.have_text = 0; + } + + + /* allocate libpng stuff, initialize transformations, write pre-IDAT data */ + + if ((rc = writepng_init(&wpng_info)) != 0) { + switch (rc) { + case 2: + fprintf(stderr, PROGNAME + ": libpng initialization problem (longjmp)\n"); + break; + case 4: + fprintf(stderr, PROGNAME ": insufficient memory\n"); + break; + case 11: + fprintf(stderr, PROGNAME + ": internal logic error (unexpected PNM type)\n"); + break; + default: + fprintf(stderr, PROGNAME + ": unknown writepng_init() error\n"); + break; + } + exit(rc); + } + + + /* free textbuf, since it's a completely local variable and all text info + * has just been written to the PNG file */ + + if (text && textbuf) { + free(textbuf); + textbuf = NULL; + } + + + /* calculate rowbytes on basis of image type; note that this becomes much + * more complicated if we choose to support PBM type, ASCII PNM types, or + * 16-bit-per-sample binary data [currently not an official NetPBM type] */ + + if (wpng_info.pnmtype == 5) + rowbytes = wpng_info.width; + else if (wpng_info.pnmtype == 6) + rowbytes = wpng_info.width * 3; + else /* if (wpng_info.pnmtype == 8) */ + rowbytes = wpng_info.width * 4; + + + /* read and write the image, either in its entirety (if writing interlaced + * PNG) or row by row (if non-interlaced) */ + + fprintf(stderr, "Encoding image data...\n"); + fflush(stderr); + + if (wpng_info.interlaced) { + long i; + ulg bytes; + ulg image_bytes = rowbytes * wpng_info.height; /* overflow? */ + + wpng_info.image_data = (uch *)malloc(image_bytes); + wpng_info.row_pointers = (uch **)malloc(wpng_info.height*sizeof(uch *)); + if (wpng_info.image_data == NULL || wpng_info.row_pointers == NULL) { + fprintf(stderr, PROGNAME ": insufficient memory for image data\n"); + writepng_cleanup(&wpng_info); + wpng_cleanup(); + exit(5); + } + for (i = 0; i < wpng_info.height; ++i) + wpng_info.row_pointers[i] = wpng_info.image_data + i*rowbytes; + bytes = fread(wpng_info.image_data, 1, image_bytes, wpng_info.infile); + if (bytes != image_bytes) { + fprintf(stderr, PROGNAME ": expected %lu bytes, got %lu bytes\n", + image_bytes, bytes); + fprintf(stderr, " (continuing anyway)\n"); + } + if (writepng_encode_image(&wpng_info) != 0) { + fprintf(stderr, PROGNAME + ": libpng problem (longjmp) while writing image data\n"); + writepng_cleanup(&wpng_info); + wpng_cleanup(); + exit(2); + } + + } else /* not interlaced: write progressively (row by row) */ { + long j; + ulg bytes; + + wpng_info.image_data = (uch *)malloc(rowbytes); + if (wpng_info.image_data == NULL) { + fprintf(stderr, PROGNAME ": insufficient memory for row data\n"); + writepng_cleanup(&wpng_info); + wpng_cleanup(); + exit(5); + } + error = 0; + for (j = wpng_info.height; j > 0L; --j) { + bytes = fread(wpng_info.image_data, 1, rowbytes, wpng_info.infile); + if (bytes != rowbytes) { + fprintf(stderr, PROGNAME + ": expected %lu bytes, got %lu bytes (row %ld)\n", rowbytes, + bytes, wpng_info.height-j); + ++error; + break; + } + if (writepng_encode_row(&wpng_info) != 0) { + fprintf(stderr, PROGNAME + ": libpng problem (longjmp) while writing row %ld\n", + wpng_info.height-j); + ++error; + break; + } + } + if (error) { + writepng_cleanup(&wpng_info); + wpng_cleanup(); + exit(2); + } + if (writepng_encode_finish(&wpng_info) != 0) { + fprintf(stderr, PROGNAME ": error on final libpng call\n"); + writepng_cleanup(&wpng_info); + wpng_cleanup(); + exit(2); + } + } + + + /* OK, we're done (successfully): clean up all resources and quit */ + + fprintf(stderr, "Done.\n"); + fflush(stderr); + + writepng_cleanup(&wpng_info); + wpng_cleanup(); + + return 0; +} + + + + + +static int wpng_isvalid_latin1(uch *p, int len) +{ + int i, result = -1; + + for (i = 0; i < len; ++i) { + if (p[i] == 10 || (p[i] > 31 && p[i] < 127) || p[i] > 160) + continue; /* character is completely OK */ + if (result < 0 || (p[result] != 27 && p[i] == 27)) + result = i; /* mark location of first questionable one */ + } /* or of first escape character (bad) */ + + return result; +} + + + + + +static void wpng_cleanup(void) +{ + if (wpng_info.outfile) { + fclose(wpng_info.outfile); + wpng_info.outfile = NULL; + } + + if (wpng_info.infile) { + fclose(wpng_info.infile); + wpng_info.infile = NULL; + } + + if (wpng_info.image_data) { + free(wpng_info.image_data); + wpng_info.image_data = NULL; + } + + if (wpng_info.row_pointers) { + free(wpng_info.row_pointers); + wpng_info.row_pointers = NULL; + } +} + + + + +#ifdef DOS_OS2_W32 + +static char *dos_kbd_gets(char *buf, int len) +{ + int ch, count=0; + + do { + buf[count++] = ch = getche(); + } while (ch != '\r' && count < len-1); + + buf[count--] = '\0'; /* terminate string */ + if (buf[count] == '\r') /* Enter key makes CR, so change to newline */ + buf[count] = '\n'; + + fprintf(stderr, "\n"); /* Enter key does *not* cause a newline */ + fflush(stderr); + + return buf; +} + +#endif /* DOS_OS2_W32 */ diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/writepng.c b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/writepng.c new file mode 100644 index 000000000..0dda62ea8 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/writepng.c @@ -0,0 +1,401 @@ +/*--------------------------------------------------------------------------- + + wpng - simple PNG-writing program writepng.c + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + + +#include /* for exit() prototype */ +#include + +#include "png.h" /* libpng header, includes setjmp.h */ +#include "writepng.h" /* typedefs, common macros, public prototypes */ + + +/* local prototype */ + +static void writepng_error_handler(png_structp png_ptr, png_const_charp msg); + + + +void writepng_version_info(void) +{ + fprintf(stderr, " Compiled with libpng %s; using libpng %s.\n", + PNG_LIBPNG_VER_STRING, png_libpng_ver); + fprintf(stderr, " Compiled with zlib %s; using zlib %s.\n", + ZLIB_VERSION, zlib_version); +} + + + + +/* returns 0 for success, 2 for libpng problem, 4 for out of memory, 11 for + * unexpected pnmtype; note that outfile might be stdout */ + +int writepng_init(mainprog_info *mainprog_ptr) +{ + png_structp png_ptr; /* note: temporary variables! */ + png_infop info_ptr; + int color_type, interlace_type; + + + /* could also replace libpng warning-handler (final NULL), but no need: */ + + png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, mainprog_ptr, + writepng_error_handler, NULL); + if (!png_ptr) + return 4; /* out of memory */ + + info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) { + png_destroy_write_struct(&png_ptr, NULL); + return 4; /* out of memory */ + } + + + /* setjmp() must be called in every function that calls a PNG-writing + * libpng function, unless an alternate error handler was installed-- + * but compatible error handlers must either use longjmp() themselves + * (as in this program) or some other method to return control to + * application code, so here we go: */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_write_struct(&png_ptr, &info_ptr); + return 2; + } + + + /* make sure outfile is (re)opened in BINARY mode */ + + png_init_io(png_ptr, mainprog_ptr->outfile); + + + /* set the compression levels--in general, always want to leave filtering + * turned on (except for palette images) and allow all of the filters, + * which is the default; want 32K zlib window, unless entire image buffer + * is 16K or smaller (unknown here)--also the default; usually want max + * compression (NOT the default); and remaining compression flags should + * be left alone */ + + png_set_compression_level(png_ptr, Z_BEST_COMPRESSION); +/* + >> this is default for no filtering; Z_FILTERED is default otherwise: + png_set_compression_strategy(png_ptr, Z_DEFAULT_STRATEGY); + >> these are all defaults: + png_set_compression_mem_level(png_ptr, 8); + png_set_compression_window_bits(png_ptr, 15); + png_set_compression_method(png_ptr, 8); + */ + + + /* set the image parameters appropriately */ + + if (mainprog_ptr->pnmtype == 5) + color_type = PNG_COLOR_TYPE_GRAY; + else if (mainprog_ptr->pnmtype == 6) + color_type = PNG_COLOR_TYPE_RGB; + else if (mainprog_ptr->pnmtype == 8) + color_type = PNG_COLOR_TYPE_RGB_ALPHA; + else { + png_destroy_write_struct(&png_ptr, &info_ptr); + return 11; + } + + interlace_type = mainprog_ptr->interlaced? PNG_INTERLACE_ADAM7 : + PNG_INTERLACE_NONE; + + png_set_IHDR(png_ptr, info_ptr, mainprog_ptr->width, mainprog_ptr->height, + mainprog_ptr->sample_depth, color_type, interlace_type, + PNG_COMPRESSION_TYPE_DEFAULT, PNG_FILTER_TYPE_DEFAULT); + + if (mainprog_ptr->gamma > 0.0) + png_set_gAMA(png_ptr, info_ptr, mainprog_ptr->gamma); + + if (mainprog_ptr->have_bg) { /* we know it's RGBA, not gray+alpha */ + png_color_16 background; + + background.red = mainprog_ptr->bg_red; + background.green = mainprog_ptr->bg_green; + background.blue = mainprog_ptr->bg_blue; + png_set_bKGD(png_ptr, info_ptr, &background); + } + + if (mainprog_ptr->have_time) { + png_time modtime; + + png_convert_from_time_t(&modtime, mainprog_ptr->modtime); + png_set_tIME(png_ptr, info_ptr, &modtime); + } + + if (mainprog_ptr->have_text) { + png_text text[6]; + int num_text = 0; + + if (mainprog_ptr->have_text & TEXT_TITLE) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "Title"; + text[num_text].text = mainprog_ptr->title; + ++num_text; + } + if (mainprog_ptr->have_text & TEXT_AUTHOR) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "Author"; + text[num_text].text = mainprog_ptr->author; + ++num_text; + } + if (mainprog_ptr->have_text & TEXT_DESC) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "Description"; + text[num_text].text = mainprog_ptr->desc; + ++num_text; + } + if (mainprog_ptr->have_text & TEXT_COPY) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "Copyright"; + text[num_text].text = mainprog_ptr->copyright; + ++num_text; + } + if (mainprog_ptr->have_text & TEXT_EMAIL) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "E-mail"; + text[num_text].text = mainprog_ptr->email; + ++num_text; + } + if (mainprog_ptr->have_text & TEXT_URL) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "URL"; + text[num_text].text = mainprog_ptr->url; + ++num_text; + } + png_set_text(png_ptr, info_ptr, text, num_text); + } + + + /* write all chunks up to (but not including) first IDAT */ + + png_write_info(png_ptr, info_ptr); + + + /* if we wanted to write any more text info *after* the image data, we + * would set up text struct(s) here and call png_set_text() again, with + * just the new data; png_set_tIME() could also go here, but it would + * have no effect since we already called it above (only one tIME chunk + * allowed) */ + + + /* set up the transformations: for now, just pack low-bit-depth pixels + * into bytes (one, two or four pixels per byte) */ + + png_set_packing(png_ptr); +/* png_set_shift(png_ptr, &sig_bit); to scale low-bit-depth values */ + + + /* make sure we save our pointers for use in writepng_encode_image() */ + + mainprog_ptr->png_ptr = png_ptr; + mainprog_ptr->info_ptr = info_ptr; + + + /* OK, that's all we need to do for now; return happy */ + + return 0; +} + + + + + +/* returns 0 for success, 2 for libpng (longjmp) problem */ + +int writepng_encode_image(mainprog_info *mainprog_ptr) +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + + /* as always, setjmp() must be called in every function that calls a + * PNG-writing libpng function */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_write_struct(&png_ptr, &info_ptr); + mainprog_ptr->png_ptr = NULL; + mainprog_ptr->info_ptr = NULL; + return 2; + } + + + /* and now we just write the whole image; libpng takes care of interlacing + * for us */ + + png_write_image(png_ptr, mainprog_ptr->row_pointers); + + + /* since that's it, we also close out the end of the PNG file now--if we + * had any text or time info to write after the IDATs, second argument + * would be info_ptr, but we optimize slightly by sending NULL pointer: */ + + png_write_end(png_ptr, NULL); + + return 0; +} + + + + + +/* returns 0 if succeeds, 2 if libpng problem */ + +int writepng_encode_row(mainprog_info *mainprog_ptr) /* NON-interlaced only! */ +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + + /* as always, setjmp() must be called in every function that calls a + * PNG-writing libpng function */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_write_struct(&png_ptr, &info_ptr); + mainprog_ptr->png_ptr = NULL; + mainprog_ptr->info_ptr = NULL; + return 2; + } + + + /* image_data points at our one row of image data */ + + png_write_row(png_ptr, mainprog_ptr->image_data); + + return 0; +} + + + + + +/* returns 0 if succeeds, 2 if libpng problem */ + +int writepng_encode_finish(mainprog_info *mainprog_ptr) /* NON-interlaced! */ +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + + /* as always, setjmp() must be called in every function that calls a + * PNG-writing libpng function */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_write_struct(&png_ptr, &info_ptr); + mainprog_ptr->png_ptr = NULL; + mainprog_ptr->info_ptr = NULL; + return 2; + } + + + /* close out PNG file; if we had any text or time info to write after + * the IDATs, second argument would be info_ptr: */ + + png_write_end(png_ptr, NULL); + + return 0; +} + + + + + +void writepng_cleanup(mainprog_info *mainprog_ptr) +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + if (png_ptr && info_ptr) + png_destroy_write_struct(&png_ptr, &info_ptr); +} + + + + + +static void writepng_error_handler(png_structp png_ptr, png_const_charp msg) +{ + mainprog_info *mainprog_ptr; + + /* This function, aside from the extra step of retrieving the "error + * pointer" (below) and the fact that it exists within the application + * rather than within libpng, is essentially identical to libpng's + * default error handler. The second point is critical: since both + * setjmp() and longjmp() are called from the same code, they are + * guaranteed to have compatible notions of how big a jmp_buf is, + * regardless of whether _BSD_SOURCE or anything else has (or has not) + * been defined. */ + + fprintf(stderr, "writepng libpng error: %s\n", msg); + fflush(stderr); + + mainprog_ptr = png_get_error_ptr(png_ptr); + if (mainprog_ptr == NULL) { /* we are completely hosed now */ + fprintf(stderr, + "writepng severe error: jmpbuf not recoverable; terminating.\n"); + fflush(stderr); + exit(99); + } + + /* Now we have our data structure we can use the information in it + * to return control to our own higher level code (all the points + * where 'setjmp' is called in this file.) This will work with other + * error handling mechanisms as well - libpng always calls png_error + * when it can proceed no further, thus, so long as the error handler + * is intercepted, application code can do its own error recovery. + */ + longjmp(mainprog_ptr->jmpbuf, 1); +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/gregbook/writepng.h b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/writepng.h new file mode 100644 index 000000000..78b966b58 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/gregbook/writepng.h @@ -0,0 +1,133 @@ +/*--------------------------------------------------------------------------- + + wpng - simple PNG-writing program writepng.h + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#ifndef TRUE +# define TRUE 1 +# define FALSE 0 +#endif + +#ifndef MAX +# define MAX(a,b) ((a) > (b)? (a) : (b)) +# define MIN(a,b) ((a) < (b)? (a) : (b)) +#endif + +#ifdef DEBUG +# define Trace(x) {fprintf x ; fflush(stderr); fflush(stdout);} +#else +# define Trace(x) ; +#endif + +#define TEXT_TITLE 0x01 +#define TEXT_AUTHOR 0x02 +#define TEXT_DESC 0x04 +#define TEXT_COPY 0x08 +#define TEXT_EMAIL 0x10 +#define TEXT_URL 0x20 + +#define TEXT_TITLE_OFFSET 0 +#define TEXT_AUTHOR_OFFSET 72 +#define TEXT_COPY_OFFSET (2*72) +#define TEXT_EMAIL_OFFSET (3*72) +#define TEXT_URL_OFFSET (4*72) +#define TEXT_DESC_OFFSET (5*72) + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +typedef struct _mainprog_info { + double gamma; + long width; + long height; + time_t modtime; + FILE *infile; + FILE *outfile; + void *png_ptr; + void *info_ptr; + uch *image_data; + uch **row_pointers; + char *title; + char *author; + char *desc; + char *copyright; + char *email; + char *url; + int filter; /* command-line-filter flag, not PNG row filter! */ + int pnmtype; + int sample_depth; + int interlaced; + int have_bg; + int have_time; + int have_text; + jmp_buf jmpbuf; + uch bg_red; + uch bg_green; + uch bg_blue; +} mainprog_info; + + +/* prototypes for public functions in writepng.c */ + +void writepng_version_info(void); + +int writepng_init(mainprog_info *mainprog_ptr); + +int writepng_encode_image(mainprog_info *mainprog_ptr); + +int writepng_encode_row(mainprog_info *mainprog_ptr); + +int writepng_encode_finish(mainprog_info *mainprog_ptr); + +void writepng_cleanup(mainprog_info *mainprog_ptr); diff --git a/src/SDL2/external/libpng-1.6.2/contrib/libtests/fakepng.c b/src/SDL2/external/libpng-1.6.2/contrib/libtests/fakepng.c new file mode 100644 index 000000000..ba360d15a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/libtests/fakepng.c @@ -0,0 +1,57 @@ +/* Fake a PNG - just write it out directly. */ +#include +#include /* for crc32 */ + +void +put_uLong(uLong val) +{ + putchar(val >> 24); + putchar(val >> 16); + putchar(val >> 8); + putchar(val >> 0); +} + +void +put_chunk(const unsigned char *chunk, uInt length) +{ + uLong crc; + + put_uLong(length-4); /* Exclude the tag */ + + fwrite(chunk, length, 1, stdout); + + crc = crc32(0, Z_NULL, 0); + put_uLong(crc32(crc, chunk, length)); +} + +const unsigned char signature[] = +{ + 137, 80, 78, 71, 13, 10, 26, 10 +}; + +const unsigned char IHDR[] = +{ + 73, 72, 68, 82, /* IHDR */ + 0, 0, 0, 1, /* width */ + 0, 0, 0, 1, /* height */ + 1, /* bit depth */ + 0, /* color type: greyscale */ + 0, /* compression method */ + 0, /* filter method */ + 0 /* interlace method: none */ +}; + +const unsigned char unknown[] = +{ + 'u', 'n', 'K', 'n' /* "unKn" - private safe to copy */ +}; + +int +main(void) +{ + fwrite(signature, sizeof signature, 1, stdout); + put_chunk(IHDR, sizeof IHDR); + + for(;;) + put_chunk(unknown, sizeof unknown); +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/libtests/gentests.sh b/src/SDL2/external/libpng-1.6.2/contrib/libtests/gentests.sh new file mode 100755 index 000000000..f0f8d2395 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/libtests/gentests.sh @@ -0,0 +1,102 @@ +#!/bin/sh +# +# Copyright (c) 2013 John Cunningham Bowler +# +# Last changed in libpng 1.6.0 [February 14, 2013] +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h +# +# Generate a set of PNG test images. The images are generated in a +# sub-directory called 'tests' by default, however a command line argument will +# change that name. The generation requires a built version of makepng in the +# current directory. +# +usage(){ + exec >&2 + echo "$0 []" + echo ' Generate a set of PNG test files in "directory" ("tests" by default)' + exit 1 +} + +mp="$PWD/makepng" +test -x "$mp" || { + exec >&2 + echo "$0: the 'makepng' program must exist" + echo " in the directory within which this program:" + echo " $mp" + echo " is executed" + usage +} + +# Just one argument: the directory +testdir="tests" +test $# -gt 1 && { + testdir="$1" + shift +} +test $# -eq 0 || usage + +# Take care not to clobber something +if test -e "$testdir" +then + test -d "$testdir" || usage +else + # mkdir -p isn't portable, so do the following + mkdir "$testdir" 2>/dev/null || mkdir -p "$testdir" || usage +fi + +# This fails in a very satisfactory way if it's not accessible +cd "$testdir" +:>"test$$.png" || { + exec >&2 + echo "$testdir: directory not writable" + usage +} +rm "test$$.png" || { + exec >&2 + echo "$testdir: you have create but not write privileges here." + echo " This is unexpected. You have a spurion; "'"'"test$$.png"'"'"." + echo " You need to remove this yourself. Try a different directory." + exit 1 +} + +# Now call makepng ($mp) to create every file we can think of with a +# reasonable name +doit(){ + for gamma in "" --sRGB --linear --1.8 + do + case "$gamma" in + "") + gname=;; + --sRGB) + gname="-srgb";; + --linear) + gname="-lin";; + --1.8) + gname="-18";; + *) + gname="-$gamma";; + esac + "$mp" $gamma "$1" "$2" "test-$1-$2$gname.png" + done +} +# +for ct in gray palette +do + for bd in 1 2 4 8 + do + doit "$ct" "$bd" + done +done +# +doit "gray" "16" +# +for ct in gray-alpha rgb rgb-alpha +do + for bd in 8 16 + do + doit "$ct" "$bd" + done +done diff --git a/src/SDL2/external/libpng-1.6.2/contrib/libtests/makepng.c b/src/SDL2/external/libpng-1.6.2/contrib/libtests/makepng.c new file mode 100644 index 000000000..9f11b2964 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/libtests/makepng.c @@ -0,0 +1,1486 @@ +/* makepng.c + * + * Copyright (c) 2013 John Cunningham Bowler + * + * Last changed in libpng 1.6.1 [March 28, 2013] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Make a test PNG image. The arguments are as follows: + * + * makepng [--sRGB|--linear|--1.8] [--color=] color-type bit-depth \ + * [file-name] + * + * The color-type may be numeric (and must match the numbers used by the PNG + * specification) or one of the format names listed below. The bit-depth is the + * component bit depth, or the pixel bit-depth for a color-mapped image. + * + * Without any options no color-space information is written, with the options + * an sRGB or the appropriate gAMA chunk is written. "1.8" refers to the + * display system used on older Apple computers to correct for high ambient + * light levels in the viewing environment; it applies a transform of + * approximately value^(1/1.45) to the color values and so a gAMA chunk of 65909 + * is written (1.45/2.2). + * + * The image data is generated internally. Unless --color is given the images + * used are as follows: + * + * 1 channel: a square image with a diamond, the least luminous colors are on + * the edge of the image, the most luminous in the center. + * + * 2 channels: the color channel increases in luminosity from top to bottom, the + * alpha channel increases in opacity from left to right. + * + * 3 channels: linear combinations of, from the top-left corner clockwise, + * black, green, white, red. + * + * 4 channels: linear combinations of, from the top-left corner clockwise, + * transparent, red, green, blue. + * + * For color-mapped images a four channel color-map is used and the PNG file has + * a tRNS chunk, as follows: + * + * 1-bit: entry 0 is transparent-red, entry 1 is opaque-white + * 2-bit: entry 0: transparent-green + * entry 1: 40%-red + * entry 2: 80%-blue + * entry 3: opaque-white + * 4-bit: the 16 combinations of the 2-bit case + * 8-bit: the 256 combinations of the 4-bit case + * + * The palette always has 2^bit-depth entries and the tRNS chunk one fewer. The + * image is the 1-channel diamond, but using palette index, not luminosity. + * + * Image size is determined by the final pixel depth in bits, i.e. channels x + * bit-depth, as follows: + * + * 8 bits or less: 64x64 + * 16 bits: 256x256 + * More than 16 bits: 1024x1024 + * + * Row filtering is turned off (the 'none' filter is used on every row) and the + * images are not interlaced. + * + * If --color is given then the whole image has that color, color-mapped images + * will have exactly one palette entry and all image files with be 16x16 in + * size. The color value is 1 to 4 decimal numbers as appropriate for the color + * type. + * + * If file-name is given then the PNG is written to that file, else it is + * written to stdout. Notice that stdout is not supported on systems where, by + * default, it assumes text output; this program makes no attempt to change the + * text mode of stdout! + */ +#define _ISOC99_SOURCE /* for strtoull */ + +#include /* for offsetof */ +#include +#include +#include +#include +#include +#include + +#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) +# include +#endif + +/* Define the following to use this test against your installed libpng, rather + * than the one being built here: + */ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../../png.h" +#endif + +/* This structure is used for inserting extra chunks (the --insert argument, not + * documented above.) + */ +typedef struct chunk_insert +{ + struct chunk_insert *next; + void (*insert)(png_structp, png_infop, int, png_charpp); + int nparams; + png_charp parameters[1]; +} chunk_insert; + +static int +channels_of_type(int color_type) +{ + if (color_type & PNG_COLOR_MASK_PALETTE) + return 1; + + else + { + int channels = 1; + + if (color_type & PNG_COLOR_MASK_COLOR) + channels = 3; + + if (color_type & PNG_COLOR_MASK_ALPHA) + return channels + 1; + + else + return channels; + } +} + +static int +pixel_depth_of_type(int color_type, int bit_depth) +{ + return channels_of_type(color_type) * bit_depth; +} + +static unsigned int +image_size_of_type(int color_type, int bit_depth, unsigned int *colors) +{ + if (*colors) + return 16; + + else + { + int pixel_depth = pixel_depth_of_type(color_type, bit_depth); + + if (pixel_depth < 8) + return 64; + + else if (pixel_depth > 16) + return 1024; + + else + return 256; + } +} + +static void +set_color(png_colorp color, png_bytep trans, unsigned int red, + unsigned int green, unsigned int blue, unsigned int alpha, + png_const_bytep gamma_table) +{ + color->red = gamma_table[red]; + color->green = gamma_table[green]; + color->blue = gamma_table[blue]; + *trans = (png_byte)alpha; +} + +static int +generate_palette(png_colorp palette, png_bytep trans, int bit_depth, + png_const_bytep gamma_table, unsigned int *colors) +{ + /* + * 1-bit: entry 0 is transparent-red, entry 1 is opaque-white + * 2-bit: entry 0: transparent-green + * entry 1: 40%-red + * entry 2: 80%-blue + * entry 3: opaque-white + * 4-bit: the 16 combinations of the 2-bit case + * 8-bit: the 256 combinations of the 4-bit case + */ + switch (colors[0]) + { + default: + fprintf(stderr, "makepng: --colors=...: invalid count %u\n", + colors[0]); + exit(1); + + case 1: + set_color(palette+0, trans+0, colors[1], colors[1], colors[1], 255, + gamma_table); + return 1; + + case 2: + set_color(palette+0, trans+0, colors[1], colors[1], colors[1], + colors[2], gamma_table); + return 1; + + case 3: + set_color(palette+0, trans+0, colors[1], colors[2], colors[3], 255, + gamma_table); + return 1; + + case 4: + set_color(palette+0, trans+0, colors[1], colors[2], colors[3], + colors[4], gamma_table); + return 1; + + case 0: + if (bit_depth == 1) + { + set_color(palette+0, trans+0, 255, 0, 0, 0, gamma_table); + set_color(palette+1, trans+1, 255, 255, 255, 255, gamma_table); + return 2; + } + + else + { + unsigned int size = 1U << (bit_depth/2); /* 2, 4 or 16 */ + unsigned int x, y, ip; + + for (x=0; x> 3; + + if (offset < rowbytes && (bit_depth < 16 || offset+1 < rowbytes)) + { + row += offset; + + switch (bit_depth) + { + case 1: + case 2: + case 4: + /* Don't gamma correct - values get smashed */ + { + unsigned int shift = (8 - bit_depth) - (x & 0x7U); + + mask <<= shift; + value = (value << shift) & mask; + *row = (png_byte)((*row & ~mask) | value); + } + return; + + default: + fprintf(stderr, "makepng: bad bit depth (internal error)\n"); + exit(1); + + case 16: + value = (unsigned int)floor(65535*pow(value/65535.,conv)+.5); + *row++ = (png_byte)(value >> 8); + *row = (png_byte)value; + return; + + case 8: + *row = gamma_table[value]; + return; + } + } + + else + { + fprintf(stderr, "makepng: row buffer overflow (internal error)\n"); + exit(1); + } + } + + else + { + fprintf(stderr, "makepng: component overflow (internal error)\n"); + exit(1); + } +} + +static void +generate_row(png_bytep row, size_t rowbytes, unsigned int y, int color_type, + int bit_depth, png_const_bytep gamma_table, double conv, + unsigned int *colors) +{ + png_uint_32 size_max = image_size_of_type(color_type, bit_depth, colors)-1; + png_uint_32 depth_max = (1U << bit_depth)-1; /* up to 65536 */ + + if (colors[0] == 0) switch (channels_of_type(color_type)) + { + /* 1 channel: a square image with a diamond, the least luminous colors are on + * the edge of the image, the most luminous in the center. + */ + case 1: + { + png_uint_32 x; + png_uint_32 base = 2*size_max - abs(2*y-size_max); + + for (x=0; x<=size_max; ++x) + { + png_uint_32 luma = base - abs(2*x-size_max); + + /* 'luma' is now in the range 0..2*size_max, we need + * 0..depth_max + */ + luma = (luma*depth_max + size_max) / (2*size_max); + set_value(row, rowbytes, x, bit_depth, luma, gamma_table, conv); + } + } + break; + + /* 2 channels: the color channel increases in luminosity from top to bottom, + * the alpha channel increases in opacity from left to right. + */ + case 2: + { + png_uint_32 alpha = (depth_max * y * 2 + size_max) / (2 * size_max); + png_uint_32 x; + + for (x=0; x<=size_max; ++x) + { + set_value(row, rowbytes, 2*x, bit_depth, + (depth_max * x * 2 + size_max) / (2 * size_max), gamma_table, + conv); + set_value(row, rowbytes, 2*x+1, bit_depth, alpha, gamma_table, + conv); + } + } + break; + + /* 3 channels: linear combinations of, from the top-left corner clockwise, + * black, green, white, red. + */ + case 3: + { + /* x0: the black->red scale (the value of the red component) at the + * start of the row (blue and green are 0). + * x1: the green->white scale (the value of the red and blue + * components at the end of the row; green is depth_max). + */ + png_uint_32 Y = (depth_max * y * 2 + size_max) / (2 * size_max); + png_uint_32 x; + + /* Interpolate x/depth_max from start to end: + * + * start end difference + * red: Y Y 0 + * green: 0 depth_max depth_max + * blue: 0 Y Y + */ + for (x=0; x<=size_max; ++x) + { + set_value(row, rowbytes, 3*x+0, bit_depth, /* red */ Y, + gamma_table, conv); + set_value(row, rowbytes, 3*x+1, bit_depth, /* green */ + (depth_max * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + set_value(row, rowbytes, 3*x+2, bit_depth, /* blue */ + (Y * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + } + } + break; + + /* 4 channels: linear combinations of, from the top-left corner clockwise, + * transparent, red, green, blue. + */ + case 4: + { + /* x0: the transparent->blue scale (the value of the blue and alpha + * components) at the start of the row (red and green are 0). + * x1: the red->green scale (the value of the red and green + * components at the end of the row; blue is 0 and alpha is + * depth_max). + */ + png_uint_32 Y = (depth_max * y * 2 + size_max) / (2 * size_max); + png_uint_32 x; + + /* Interpolate x/depth_max from start to end: + * + * start end difference + * red: 0 depth_max-Y depth_max-Y + * green: 0 Y Y + * blue: Y 0 -Y + * alpha: Y depth_max depth_max-Y + */ + for (x=0; x<=size_max; ++x) + { + set_value(row, rowbytes, 4*x+0, bit_depth, /* red */ + ((depth_max-Y) * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + set_value(row, rowbytes, 4*x+1, bit_depth, /* green */ + (Y * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + set_value(row, rowbytes, 4*x+2, bit_depth, /* blue */ + Y - (Y * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + set_value(row, rowbytes, 4*x+3, bit_depth, /* alpha */ + Y + ((depth_max-Y) * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + } + } + break; + + default: + fprintf(stderr, "makepng: internal bad channel count\n"); + exit(2); + } + + else if (color_type & PNG_COLOR_MASK_PALETTE) + { + /* Palette with fixed color: the image rows are all 0 and the image width + * is 16. + */ + memset(row, 0, rowbytes); + } + + else if (colors[0] == channels_of_type(color_type)) + switch (channels_of_type(color_type)) + { + case 1: + { + const png_uint_32 luma = colors[1]; + png_uint_32 x; + + for (x=0; x<=size_max; ++x) + set_value(row, rowbytes, x, bit_depth, luma, gamma_table, + conv); + } + break; + + case 2: + { + const png_uint_32 luma = colors[1]; + const png_uint_32 alpha = colors[2]; + png_uint_32 x; + + for (x=0; x 0 && gamma < 1000) + gamma = PNG_FP_1; + + if (gamma > 0) + real_gamma = gamma; + + { + unsigned int i; + + if (real_gamma == 45455) for (i=0; i<256; ++i) + { + gamma_table[i] = (png_byte)i; + conv = 1.; + } + + else + { + /* Convert 'i' from sRGB (45455) to real_gamma, this makes + * the images look the same regardless of the gAMA chunk. + */ + conv = real_gamma; + conv /= 45455; + + gamma_table[0] = 0; + + for (i=1; i<255; ++i) + gamma_table[i] = (png_byte)floor(pow(i/255.,conv) * 255 + .5); + + gamma_table[255] = 255; + } + } + + png_set_IHDR(png_ptr, info_ptr, size, size, bit_depth, color_type, + PNG_INTERLACE_NONE, PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + + if (color_type & PNG_COLOR_MASK_PALETTE) + { + int npalette; + png_color palette[256]; + png_byte trans[256]; + + npalette = generate_palette(palette, trans, bit_depth, gamma_table, + colors); + png_set_PLTE(png_ptr, info_ptr, palette, npalette); + png_set_tRNS(png_ptr, info_ptr, trans, npalette-1, + NULL/*transparent color*/); + + /* Reset gamma_table to prevent the image rows being changed */ + for (npalette=0; npalette<256; ++npalette) + gamma_table[npalette] = (png_byte)npalette; + } + + if (gamma == PNG_DEFAULT_sRGB) + png_set_sRGB(png_ptr, info_ptr, PNG_sRGB_INTENT_ABSOLUTE); + + else if (gamma > 0) /* Else don't set color space information */ + { + png_set_gAMA_fixed(png_ptr, info_ptr, real_gamma); + + /* Just use the sRGB values here. */ + png_set_cHRM_fixed(png_ptr, info_ptr, + /* color x y */ + /* white */ 31270, 32900, + /* red */ 64000, 33000, + /* green */ 30000, 60000, + /* blue */ 15000, 6000 + ); + } + + /* Insert extra information. */ + while (insert != NULL) + { + insert->insert(png_ptr, info_ptr, insert->nparams, insert->parameters); + insert = insert->next; + } + + /* Write the file header. */ + png_write_info(png_ptr, info_ptr); + + /* Restrict the filters */ + png_set_filter(png_ptr, PNG_FILTER_TYPE_BASE, filters); + + { + int passes = png_set_interlace_handling(png_ptr); + int pass; + png_size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr); + + row = malloc(rowbytes); + + if (row == NULL) + png_error(png_ptr, "OOM allocating row buffer"); + + for (pass = 0; pass < passes; ++pass) + { + unsigned int y; + + for (y=0; y 0) + { + /* Round up to a multiple of 4 here to allow an iCCP profile + * to be padded to a 4x boundary. + */ + png_bytep data = malloc((total+3)&~3); + + if (data != NULL) + { + size_t new_size = 0; + + for (;;) + { + ch = getc(fp); + if (ch == EOF) break; + data[new_size++] = (png_byte)ch; + } + + if (ferror(fp) || new_size != total) + { + perror("temporary file"); + fprintf(stderr, "temporary file read error\n"); + free(data); + } + + else + { + (void)fclose(fp); + *result = data; + return total; + } + } + + else + fprintf(stderr, "%s: out of memory loading file\n", name); + } + + else + fprintf(stderr, "%s: empty file\n", name); + } + } + } + + else + { + perror(name); + fprintf(stderr, "%s: open failed\n", name); + } + + fclose(fp); + } + + else + fprintf(stderr, "makepng: %s: could not open temporary file\n", name); + + exit(1); + return 0; +} + +static png_size_t +load_fake(png_charp param, png_bytepp profile) +{ + char *endptr = NULL; + unsigned long long int size = strtoull(param, &endptr, 0/*base*/); + + /* The 'fake' format is *[string] */ + if (endptr != NULL && *endptr == '*') + { + size_t len = strlen(++endptr); + size_t result = (size_t)size; + + if (len == 0) len = 1; /* capture the terminating '\0' */ + + /* Now repeat that string to fill 'size' bytes. */ + if (result == size && (*profile = malloc(result)) != NULL) + { + png_bytep out = *profile; + + if (len == 1) + memset(out, *endptr, result); + + else + { + while (size >= len) + { + memcpy(out, endptr, len); + out += len; + size -= len; + } + memcpy(out, endptr, size); + } + + return result; + } + + else + { + fprintf(stderr, "%s: size exceeds system limits\n", param); + exit(1); + } + } + + return 0; +} + +static void +check_param_count(int nparams, int expect) +{ + if (nparams != expect) + { + fprintf(stderr, "bad parameter count (internal error)\n"); + exit(1); + } +} + +static void +insert_iCCP(png_structp png_ptr, png_infop info_ptr, int nparams, + png_charpp params) +{ + png_bytep profile = NULL; + png_uint_32 proflen = 0; + int result; + + check_param_count(nparams, 2); + + switch (params[1][0]) + { + case '<': + { + png_size_t filelen = load_file(params[1]+1, &profile); + if (filelen > 0xfffffffc) /* Maximum profile length */ + { + fprintf(stderr, "%s: file too long (%lu) for an ICC profile\n", + params[1]+1, (unsigned long)filelen); + exit(1); + } + + proflen = (png_uint_32)filelen; + } + break; + + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + { + png_size_t fake_len = load_fake(params[1], &profile); + + if (fake_len > 0) /* else a simple parameter */ + { + if (fake_len > 0xffffffff) /* Maximum profile length */ + { + fprintf(stderr, + "%s: fake data too long (%lu) for an ICC profile\n", + params[1], (unsigned long)fake_len); + exit(1); + } + proflen = (png_uint_32)(fake_len & ~3U); + /* Always fix up the profile length. */ + png_save_uint_32(profile, proflen); + break; + } + } + + default: + fprintf(stderr, "--insert iCCP \"%s\": unrecognized\n", params[1]); + fprintf(stderr, " use '<' to read a file: \" 3) + { + png_uint_32 prof_header = png_get_uint_32(profile); + + if (prof_header != proflen) + { + fprintf(stderr, "--insert iCCP %s: profile length field wrong:\n", + params[1]); + fprintf(stderr, " actual %lu, recorded value %lu (corrected)\n", + (unsigned long)proflen, (unsigned long)prof_header); + png_save_uint_32(profile, proflen); + } + } + + if (result && profile != NULL && proflen >=4) + png_set_iCCP(png_ptr, info_ptr, params[0], PNG_COMPRESSION_TYPE_BASE, + profile, proflen); + + if (profile) + free(profile); + + if (!result) + exit(1); +} + +static void +clear_text(png_text *text, png_charp keyword) +{ + text->compression = -1; /* none */ + text->key = keyword; + text->text = NULL; + text->text_length = 0; /* libpng calculates this */ + text->itxt_length = 0; /* libpng calculates this */ + text->lang = NULL; + text->lang_key = NULL; +} + +static void +set_text(png_structp png_ptr, png_infop info_ptr, png_textp text, + png_charp param) +{ + switch (param[0]) + { + case '<': + { + png_bytep file = NULL; + + text->text_length = load_file(param+1, &file); + text->text = (png_charp)file; + } + break; + + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + { + png_bytep data = NULL; + png_size_t fake_len = load_fake(param, &data); + + if (fake_len > 0) /* else a simple parameter */ + { + text->text_length = fake_len; + text->text = (png_charp)data; + break; + } + } + + default: + text->text = param; + break; + } + + png_set_text(png_ptr, info_ptr, text, 1); + + if (text->text != param) + free(text->text); +} + +static void +insert_tEXt(png_structp png_ptr, png_infop info_ptr, int nparams, + png_charpp params) +{ + png_text text; + + check_param_count(nparams, 2); + clear_text(&text, params[0]); + set_text(png_ptr, info_ptr, &text, params[1]); +} + +static void +insert_zTXt(png_structp png_ptr, png_infop info_ptr, int nparams, + png_charpp params) +{ + png_text text; + + check_param_count(nparams, 2); + clear_text(&text, params[0]); + text.compression = 0; /* deflate */ + set_text(png_ptr, info_ptr, &text, params[1]); +} + +static void +insert_iTXt(png_structp png_ptr, png_infop info_ptr, int nparams, + png_charpp params) +{ + png_text text; + + check_param_count(nparams, 4); + clear_text(&text, params[0]); + text.compression = 2; /* iTXt + deflate */ + text.lang = params[1];/* language tag */ + text.lang_key = params[2]; /* translated keyword */ + set_text(png_ptr, info_ptr, &text, params[3]); +} + +static void +insert_hIST(png_structp png_ptr, png_infop info_ptr, int nparams, png_charpp params) +{ + int i; + png_uint_16 freq[256]; + + /* libpng takes the count from the PLTE count; we don't check it here but we + * do set the array to 0 for unspecified entries. + */ + memset(freq, 0, sizeof freq); + for (i=0; inext = NULL; + cip->insert = insert; + cip->nparams = nparams; + for (i=0; iparameters[i] = list[i]; + + return cip; +} + +static chunk_insert * +find_insert(png_const_charp what, png_charp param) +{ + png_uint_32 chunk = 0; + png_charp parameter_list[1024]; + int i, nparams; + + /* Assemble the chunk name */ + for (i=0; i<4; ++i) + { + char ch = what[i]; + + if ((ch >= 65 && ch <= 90) || (ch >= 97 && ch <= 122)) + chunk = (chunk << 8) + what[i]; + + else + break; + } + + if (i < 4 || what[4] != 0) + { + fprintf(stderr, "makepng --insert \"%s\": invalid chunk name\n", what); + exit(1); + } + + /* Assemble the parameter list. */ + nparams = find_parameters(what, param, parameter_list, 1024); + +# define CHUNK(a,b,c,d) (((a)<<24)+((b)<<16)+((c)<<8)+(d)) + + switch (chunk) + { + case CHUNK(105,67,67,80): /* iCCP */ + if (nparams == 2) + return make_insert(what, insert_iCCP, nparams, parameter_list); + break; + + case CHUNK(116,69,88,116): /* tEXt */ + if (nparams == 2) + return make_insert(what, insert_tEXt, nparams, parameter_list); + break; + + case CHUNK(122,84,88,116): /* zTXt */ + if (nparams == 2) + return make_insert(what, insert_zTXt, nparams, parameter_list); + break; + + case CHUNK(105,84,88,116): /* iTXt */ + if (nparams == 4) + return make_insert(what, insert_iTXt, nparams, parameter_list); + break; + + case CHUNK(104,73,83,84): /* hIST */ + if (nparams <= 256) + return make_insert(what, insert_hIST, nparams, parameter_list); + break; + +#if 0 + case CHUNK(115,80,76,84): /* sPLT */ + return make_insert(what, insert_sPLT, nparams, parameter_list); +#endif + + default: + fprintf(stderr, "makepng --insert \"%s\": unrecognized chunk name\n", + what); + exit(1); + } + + bad_parameter_count(what, nparams); + return NULL; +} + +/* This is a not-very-good parser for a sequence of numbers (including 0). It + * doesn't accept some apparently valid things, but it accepts all the sensible + * combinations. + */ +static void +parse_color(char *arg, unsigned int *colors) +{ + unsigned int ncolors = 0; + + while (*arg && ncolors < 4) + { + char *ep = arg; + + unsigned long ul = strtoul(arg, &ep, 0); + + if (ul > 65535) + { + fprintf(stderr, "makepng --color=...'%s': too big\n", arg); + exit(1); + } + + if (ep == arg) + { + fprintf(stderr, "makepng --color=...'%s': not a valid color\n", arg); + exit(1); + } + + if (*ep) ++ep; /* skip a separator */ + arg = ep; + + colors[++ncolors] = (unsigned int)ul; /* checked above */ + } + + if (*arg) + { + fprintf(stderr, "makepng --color=...'%s': too many values\n", arg); + exit(1); + } + + *colors = ncolors; +} + +int +main(int argc, char **argv) +{ + FILE *fp = stdout; + const char *file_name = NULL; + int color_type = 8; /* invalid */ + int bit_depth = 32; /* invalid */ + unsigned int colors[5]; + unsigned int filters = PNG_ALL_FILTERS; + png_fixed_point gamma = 0; /* not set */ + chunk_insert *head_insert = NULL; + chunk_insert **insert_ptr = &head_insert; + + memset(colors, 0, sizeof colors); + + while (--argc > 0) + { + char *arg = *++argv; + + if (strcmp(arg, "--sRGB") == 0) + { + gamma = PNG_DEFAULT_sRGB; + continue; + } + + if (strcmp(arg, "--linear") == 0) + { + gamma = PNG_FP_1; + continue; + } + + if (strcmp(arg, "--1.8") == 0) + { + gamma = PNG_GAMMA_MAC_18; + continue; + } + + if (strcmp(arg, "--nofilters") == 0) + { + filters = PNG_FILTER_NONE; + continue; + } + + if (strncmp(arg, "--color=", 8) == 0) + { + parse_color(arg+8, colors); + continue; + } + + if (argc >= 3 && strcmp(arg, "--insert") == 0) + { + png_const_charp what = *++argv; + png_charp param = *++argv; + chunk_insert *new_insert; + + argc -= 2; + + new_insert = find_insert(what, param); + + if (new_insert != NULL) + { + *insert_ptr = new_insert; + insert_ptr = &new_insert->next; + } + + continue; + } + + if (arg[0] == '-') + { + fprintf(stderr, "makepng: %s: invalid option\n", arg); + exit(1); + } + + if (strcmp(arg, "palette") == 0) + { + color_type = PNG_COLOR_TYPE_PALETTE; + continue; + } + + if (strncmp(arg, "gray", 4) == 0) + { + if (arg[4] == 0) + { + color_type = PNG_COLOR_TYPE_GRAY; + continue; + } + + else if (strcmp(arg+4, "a") == 0 || + strcmp(arg+4, "alpha") == 0 || + strcmp(arg+4, "-alpha") == 0) + { + color_type = PNG_COLOR_TYPE_GRAY_ALPHA; + continue; + } + } + + if (strncmp(arg, "rgb", 3) == 0) + { + if (arg[3] == 0) + { + color_type = PNG_COLOR_TYPE_RGB; + continue; + } + + else if (strcmp(arg+3, "a") == 0 || + strcmp(arg+3, "alpha") == 0 || + strcmp(arg+3, "-alpha") == 0) + { + color_type = PNG_COLOR_TYPE_RGB_ALPHA; + continue; + } + } + + if (color_type == 8 && isdigit(arg[0])) + { + color_type = atoi(arg); + if (color_type < 0 || color_type > 6 || color_type == 1 || + color_type == 5) + { + fprintf(stderr, "makepng: %s: not a valid color type\n", arg); + exit(1); + } + + continue; + } + + if (bit_depth == 32 && isdigit(arg[0])) + { + bit_depth = atoi(arg); + if (bit_depth <= 0 || bit_depth > 16 || + (bit_depth & -bit_depth) != bit_depth) + { + fprintf(stderr, "makepng: %s: not a valid bit depth\n", arg); + exit(1); + } + + continue; + } + + if (argc == 1) /* It's the file name */ + { + fp = fopen(arg, "wb"); + if (fp == NULL) + { + fprintf(stderr, "%s: %s: could not open\n", arg, strerror(errno)); + exit(1); + } + + file_name = arg; + continue; + } + + fprintf(stderr, "makepng: %s: unknown argument\n", arg); + exit(1); + } /* argument while loop */ + + if (color_type == 8 || bit_depth == 32) + { + fprintf(stderr, "usage: makepng [--sRGB|--linear|--1.8] " + "[--color=...] color-type bit-depth [file-name]\n" + " Make a test PNG file, by default writes to stdout.\n"); + exit(1); + } + + /* Check the colors */ + { + const unsigned int lim = (color_type == PNG_COLOR_TYPE_PALETTE ? 255U : + (1U< lim) + { + fprintf(stderr, "makepng: --color=...: %u out of range [0..%u]\n", + colors[i], lim); + exit(1); + } + } + + /* Restrict the filters for more speed to those we know are used for the + * generated images. + */ + if (filters == PNG_ALL_FILTERS) + { + if ((color_type & PNG_COLOR_MASK_PALETTE) != 0 || bit_depth < 8) + filters = PNG_FILTER_NONE; + + else if (color_type & PNG_COLOR_MASK_COLOR) /* rgb */ + { + if (bit_depth == 8) + filters &= ~(PNG_FILTER_NONE | PNG_FILTER_AVG); + + else + filters = PNG_FILTER_SUB | PNG_FILTER_PAETH; + } + + else /* gray 8 or 16-bit */ + filters &= ~PNG_FILTER_NONE; + } + + { + int ret = write_png(&file_name, fp, color_type, bit_depth, gamma, + head_insert, filters, colors); + + if (ret != 0 && file_name != NULL) + remove(file_name); + + return ret; + } +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/libtests/pngstest.c b/src/SDL2/external/libpng-1.6.2/contrib/libtests/pngstest.c new file mode 100644 index 000000000..35e7c8779 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/libtests/pngstest.c @@ -0,0 +1,3742 @@ +/*- + * pngstest.c + * + * Copyright (c) 2013 John Cunningham Bowler + * + * Last changed in libpng 1.6.1 [March 28, 2013] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Test for the PNG 'simplified' APIs. + */ +#define _ISOC90_SOURCE 1 +#define MALLOC_CHECK_ 2/*glibc facility: turn on debugging*/ + +#include +#include +#include +#include +#include +#include +#include + +#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) +# include +#endif + +/* Define the following to use this test against your installed libpng, rather + * than the one being built here: + */ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../../png.h" +#endif + +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED /* Else nothing can be done */ +#include "../tools/sRGB.h" + +/* KNOWN ISSUES + * + * These defines switch on alternate algorithms for format conversions to match + * the current libpng implementation; they are set to allow pngstest to pass + * even though libpng is producing answers that are not as correct as they + * should be. + */ +#define ALLOW_UNUSED_GPC 0 + /* If true include unused static GPC functions and declare an external array + * of them to hide the fact that they are unused. This is for development + * use while testing the correct function to use to take into account libpng + * misbehavior, such as using a simple power law to correct sRGB to linear. + */ + +/* The following is to support direct compilation of this file as C++ */ +#ifdef __cplusplus +# define voidcast(type, value) static_cast(value) +# define aligncastconst(type, value) \ + static_cast(static_cast(value)) +#else +# define voidcast(type, value) (value) +# define aligncastconst(type, value) ((const void*)(value)) +#endif /* __cplusplus */ + +/* During parallel runs of pngstest each temporary file needs a unique name, + * this is used to permit uniqueness using a command line argument which can be + * up to 22 characters long. + */ +static char tmpf[23] = "TMP"; + +/* Generate random bytes. This uses a boring repeatable algorithm and it + * is implemented here so that it gives the same set of numbers on every + * architecture. It's a linear congruential generator (Knuth or Sedgewick + * "Algorithms") but it comes from the 'feedback taps' table in Horowitz and + * Hill, "The Art of Electronics". + */ +static void +make_random_bytes(png_uint_32* seed, void* pv, size_t size) +{ + png_uint_32 u0 = seed[0], u1 = seed[1]; + png_bytep bytes = voidcast(png_bytep, pv); + + /* There are thirty three bits, the next bit in the sequence is bit-33 XOR + * bit-20. The top 1 bit is in u1, the bottom 32 are in u0. + */ + size_t i; + for (i=0; i> (20-8)) ^ ((u1 << 7) | (u0 >> (32-7)))) & 0xff; + u1 <<= 8; + u1 |= u0 >> 24; + u0 <<= 8; + u0 |= u; + *bytes++ = (png_byte)u; + } + + seed[0] = u0; + seed[1] = u1; +} + +static void +random_color(png_colorp color) +{ + static png_uint_32 color_seed[2] = { 0x12345678, 0x9abcdef }; + make_random_bytes(color_seed, color, sizeof *color); +} + +/* Math support - neither Cygwin nor Visual Studio have C99 support and we need + * a predictable rounding function, so make one here: + */ +static double +closestinteger(double x) +{ + return floor(x + .5); +} + +/* Cast support: remove GCC whines. */ +static png_byte +u8d(double d) +{ + d = closestinteger(d); + return (png_byte)d; +} + +static png_uint_16 +u16d(double d) +{ + d = closestinteger(d); + return (png_uint_16)d; +} + +/* sRGB support: use exact calculations rounded to the nearest int, see the + * fesetround() call in main(). sRGB_to_d optimizes the 8 to 16-bit conversion. + */ +static double sRGB_to_d[256]; +static double g22_to_d[256]; + +static void +init_sRGB_to_d(void) +{ + int i; + + sRGB_to_d[0] = 0; + for (i=1; i<255; ++i) + sRGB_to_d[i] = linear_from_sRGB(i/255.); + sRGB_to_d[255] = 1; + + g22_to_d[0] = 0; + for (i=1; i<255; ++i) + g22_to_d[i] = pow(i/255., 1/.45455); + g22_to_d[255] = 1; +} + +static png_byte +sRGB(double linear /*range 0.0 .. 1.0*/) +{ + return u8d(255 * sRGB_from_linear(linear)); +} + +static png_byte +isRGB(int fixed_linear) +{ + return sRGB(fixed_linear / 65535.); +} + +#if 0 /* not used */ +static png_byte +unpremultiply(int component, int alpha) +{ + if (alpha <= component) + return 255; /* Arbitrary, but consistent with the libpng code */ + + else if (alpha >= 65535) + return isRGB(component); + + else + return sRGB((double)component / alpha); +} +#endif + +static png_uint_16 +ilinear(int fixed_srgb) +{ + return u16d(65535 * sRGB_to_d[fixed_srgb]); +} + +static png_uint_16 +ilineara(int fixed_srgb, int alpha) +{ + return u16d((257 * alpha) * sRGB_to_d[fixed_srgb]); +} + +static png_uint_16 +ilinear_g22(int fixed_srgb) +{ + return u16d(65535 * g22_to_d[fixed_srgb]); +} + +#if ALLOW_UNUSED_GPC +static png_uint_16 +ilineara_g22(int fixed_srgb, int alpha) +{ + return u16d((257 * alpha) * g22_to_d[fixed_srgb]); +} +#endif + +static double +YfromRGBint(int ir, int ig, int ib) +{ + double r = ir; + double g = ig; + double b = ib; + return YfromRGB(r, g, b); +} + +#if 0 /* unused */ +/* The error that results from using a 2.2 power law in place of the correct + * sRGB transform, given an 8-bit value which might be either sRGB or power-law. + */ +static int +power_law_error8(int value) +{ + if (value > 0 && value < 255) + { + double vd = value / 255.; + double e = fabs( + pow(sRGB_to_d[value], 1/2.2) - sRGB_from_linear(pow(vd, 2.2))); + + /* Always allow an extra 1 here for rounding errors */ + e = 1+floor(255 * e); + return (int)e; + } + + return 0; +} + +static int error_in_sRGB_roundtrip = 56; /* by experiment */ +static int +power_law_error16(int value) +{ + if (value > 0 && value < 65535) + { + /* Round trip the value through an 8-bit representation but using + * non-matching to/from conversions. + */ + double vd = value / 65535.; + double e = fabs( + pow(sRGB_from_linear(vd), 2.2) - linear_from_sRGB(pow(vd, 1/2.2))); + + /* Always allow an extra 1 here for rounding errors */ + e = error_in_sRGB_roundtrip+floor(65535 * e); + return (int)e; + } + + return 0; +} + +static int +compare_8bit(int v1, int v2, int error_limit, int multiple_algorithms) +{ + int e = abs(v1-v2); + int ev1, ev2; + + if (e <= error_limit) + return 1; + + if (!multiple_algorithms) + return 0; + + ev1 = power_law_error8(v1); + if (e <= ev1) + return 1; + + ev2 = power_law_error8(v2); + if (e <= ev2) + return 1; + + return 0; +} + +static int +compare_16bit(int v1, int v2, int error_limit, int multiple_algorithms) +{ + int e = abs(v1-v2); + int ev1, ev2; + + if (e <= error_limit) + return 1; + + /* "multiple_algorithms" in this case means that a color-map has been + * involved somewhere, so we can deduce that the values were forced to 8-bit + * (like the via_linear case for 8-bit.) + */ + if (!multiple_algorithms) + return 0; + + ev1 = power_law_error16(v1); + if (e <= ev1) + return 1; + + ev2 = power_law_error16(v2); + if (e <= ev2) + return 1; + + return 0; +} +#endif /* unused */ + +#define READ_FILE 1 /* else memory */ +#define USE_STDIO 2 /* else use file name */ +#define STRICT 4 /* fail on warnings too */ +#define VERBOSE 8 +#define KEEP_TMPFILES 16 /* else delete temporary files */ +#define KEEP_GOING 32 +#define ACCUMULATE 64 +#define FAST_WRITE 128 +#define sRGB_16BIT 256 + +static void +print_opts(png_uint_32 opts) +{ + if (opts & READ_FILE) + printf(" --file"); + if (opts & USE_STDIO) + printf(" --stdio"); + if (opts & STRICT) + printf(" --strict"); + if (opts & VERBOSE) + printf(" --verbose"); + if (opts & KEEP_TMPFILES) + printf(" --preserve"); + if (opts & KEEP_GOING) + printf(" --keep-going"); + if (opts & ACCUMULATE) + printf(" --accumulate"); + if (!(opts & FAST_WRITE)) /* --fast is currently the default */ + printf(" --slow"); + if (opts & sRGB_16BIT) + printf(" --sRGB-16bit"); +} + +#define FORMAT_NO_CHANGE 0x80000000 /* additional flag */ + +/* A name table for all the formats - defines the format of the '+' arguments to + * pngstest. + */ +#define FORMAT_COUNT 64 +#define FORMAT_MASK 0x3f +static PNG_CONST char * PNG_CONST format_names[FORMAT_COUNT] = +{ + "sRGB-gray", + "sRGB-gray+alpha", + "sRGB-rgb", + "sRGB-rgb+alpha", + "linear-gray", + "linear-gray+alpha", + "linear-rgb", + "linear-rgb+alpha", + + "color-mapped-sRGB-gray", + "color-mapped-sRGB-gray+alpha", + "color-mapped-sRGB-rgb", + "color-mapped-sRGB-rgb+alpha", + "color-mapped-linear-gray", + "color-mapped-linear-gray+alpha", + "color-mapped-linear-rgb", + "color-mapped-linear-rgb+alpha", + + "sRGB-gray", + "sRGB-gray+alpha", + "sRGB-bgr", + "sRGB-bgr+alpha", + "linear-gray", + "linear-gray+alpha", + "linear-bgr", + "linear-bgr+alpha", + + "color-mapped-sRGB-gray", + "color-mapped-sRGB-gray+alpha", + "color-mapped-sRGB-bgr", + "color-mapped-sRGB-bgr+alpha", + "color-mapped-linear-gray", + "color-mapped-linear-gray+alpha", + "color-mapped-linear-bgr", + "color-mapped-linear-bgr+alpha", + + "sRGB-gray", + "alpha+sRGB-gray", + "sRGB-rgb", + "alpha+sRGB-rgb", + "linear-gray", + "alpha+linear-gray", + "linear-rgb", + "alpha+linear-rgb", + + "color-mapped-sRGB-gray", + "color-mapped-alpha+sRGB-gray", + "color-mapped-sRGB-rgb", + "color-mapped-alpha+sRGB-rgb", + "color-mapped-linear-gray", + "color-mapped-alpha+linear-gray", + "color-mapped-linear-rgb", + "color-mapped-alpha+linear-rgb", + + "sRGB-gray", + "alpha+sRGB-gray", + "sRGB-bgr", + "alpha+sRGB-bgr", + "linear-gray", + "alpha+linear-gray", + "linear-bgr", + "alpha+linear-bgr", + + "color-mapped-sRGB-gray", + "color-mapped-alpha+sRGB-gray", + "color-mapped-sRGB-bgr", + "color-mapped-alpha+sRGB-bgr", + "color-mapped-linear-gray", + "color-mapped-alpha+linear-gray", + "color-mapped-linear-bgr", + "color-mapped-alpha+linear-bgr", +}; + +/* Decode an argument to a format number. */ +static png_uint_32 +formatof(const char *arg) +{ + char *ep; + unsigned long format = strtoul(arg, &ep, 0); + + if (ep > arg && *ep == 0 && format < FORMAT_COUNT) + return (png_uint_32)format; + + else for (format=0; format < FORMAT_COUNT; ++format) + { + if (strcmp(format_names[format], arg) == 0) + return (png_uint_32)format; + } + + fprintf(stderr, "pngstest: format name '%s' invalid\n", arg); + return FORMAT_COUNT; +} + +/* Bitset/test functions for formats */ +#define FORMAT_SET_COUNT (FORMAT_COUNT / 32) +typedef struct +{ + png_uint_32 bits[FORMAT_SET_COUNT]; +} +format_list; + +static void format_init(format_list *pf) +{ + int i; + for (i=0; ibits[i] = 0; /* All off */ +} + +#if 0 /* currently unused */ +static void format_clear(format_list *pf) +{ + int i; + for (i=0; ibits[i] = 0; +} +#endif + +static int format_is_initial(format_list *pf) +{ + int i; + for (i=0; ibits[i] != 0) + return 0; + + return 1; +} + +static int format_set(format_list *pf, png_uint_32 format) +{ + if (format < FORMAT_COUNT) + return pf->bits[format >> 5] |= ((png_uint_32)1) << (format & 31); + + return 0; +} + +#if 0 /* currently unused */ +static int format_unset(format_list *pf, png_uint_32 format) +{ + if (format < FORMAT_COUNT) + return pf->bits[format >> 5] &= ~((png_uint_32)1) << (format & 31); + + return 0; +} +#endif + +static int format_isset(format_list *pf, png_uint_32 format) +{ + return format < FORMAT_COUNT && + (pf->bits[format >> 5] & (((png_uint_32)1) << (format & 31))) != 0; +} + +static void format_default(format_list *pf, int redundant) +{ + if (redundant) + { + int i; + + /* set everything, including flags that are pointless */ + for (i=0; ibits[i] = ~(png_uint_32)0; + } + + else + { + png_uint_32 f; + + for (f=0; finput_file != NULL) + rewind(image->input_file); +} + +/* Free the image buffer; the buffer is re-used on a re-read, this is just for + * cleanup. + */ +static void +freebuffer(Image *image) +{ + if (image->buffer) free(image->buffer); + image->buffer = NULL; + image->bufsize = 0; + image->allocsize = 0; +} + +/* Delete function; cleans out all the allocated data and the temporary file in + * the image. + */ +static void +freeimage(Image *image) +{ + freebuffer(image); + png_image_free(&image->image); + + if (image->input_file != NULL) + { + fclose(image->input_file); + image->input_file = NULL; + } + + if (image->input_memory != NULL) + { + free(image->input_memory); + image->input_memory = NULL; + image->input_memory_size = 0; + } + + if (image->tmpfile_name[0] != 0 && (image->opts & KEEP_TMPFILES) == 0) + { + remove(image->tmpfile_name); + image->tmpfile_name[0] = 0; + } +} + +/* This is actually a re-initializer; allows an image structure to be re-used by + * freeing everything that relates to an old image. + */ +static void initimage(Image *image, png_uint_32 opts, const char *file_name, + int stride_extra) +{ + freeimage(image); + memset(&image->image, 0, sizeof image->image); + image->opts = opts; + image->file_name = file_name; + image->stride_extra = stride_extra; +} + +/* Make sure the image buffer is big enough; allows re-use of the buffer if the + * image is re-read. + */ +#define BUFFER_INIT8 73 +static void +allocbuffer(Image *image) +{ + png_size_t size = PNG_IMAGE_BUFFER_SIZE(image->image, image->stride); + + if (size+32 > image->bufsize) + { + freebuffer(image); + image->buffer = voidcast(png_bytep, malloc(size+32)); + if (image->buffer == NULL) + { + fflush(stdout); + fprintf(stderr, + "simpletest: out of memory allocating %lu(+32) byte buffer\n", + (unsigned long)size); + exit(1); + } + image->bufsize = size+32; + } + + memset(image->buffer, 95, image->bufsize); + memset(image->buffer+16, BUFFER_INIT8, size); + image->allocsize = size; +} + +/* Make sure 16 bytes match the given byte. */ +static int +check16(png_const_bytep bp, int b) +{ + int i = 16; + + do + if (*bp != b) return 1; + while (--i); + + return 0; +} + +/* Check for overwrite in the image buffer. */ +static void +checkbuffer(Image *image, const char *arg) +{ + if (check16(image->buffer, 95)) + { + fflush(stdout); + fprintf(stderr, "%s: overwrite at start of image buffer\n", arg); + exit(1); + } + + if (check16(image->buffer+16+image->allocsize, 95)) + { + fflush(stdout); + fprintf(stderr, "%s: overwrite at end of image buffer\n", arg); + exit(1); + } +} + +/* ERROR HANDLING */ +/* Log a terminal error, also frees the libpng part of the image if necessary. + */ +static int +logerror(Image *image, const char *a1, const char *a2, const char *a3) +{ + fflush(stdout); + if (image->image.warning_or_error) + fprintf(stderr, "%s%s%s: %s\n", a1, a2, a3, image->image.message); + + else + fprintf(stderr, "%s%s%s\n", a1, a2, a3); + + if (image->image.opaque != NULL) + { + fprintf(stderr, "%s: image opaque pointer non-NULL on error\n", + image->file_name); + png_image_free(&image->image); + } + + return 0; +} + +/* Log an error and close a file (just a utility to do both things in one + * function call.) + */ +static int +logclose(Image *image, FILE *f, const char *name, const char *operation) +{ + int e = errno; + + fclose(f); + return logerror(image, name, operation, strerror(e)); +} + +/* Make sure the png_image has been freed - validates that libpng is doing what + * the spec says and freeing the image. + */ +static int +checkopaque(Image *image) +{ + if (image->image.opaque != NULL) + { + png_image_free(&image->image); + return logerror(image, image->file_name, ": opaque not NULL", ""); + } + + else if (image->image.warning_or_error != 0 && (image->opts & STRICT) != 0) + return logerror(image, image->file_name, " --strict", ""); + + else + return 1; +} + +/* IMAGE COMPARISON/CHECKING */ +/* Compare the pixels of two images, which should be the same but aren't. The + * images must have been checked for a size match. + */ +typedef struct +{ + /* The components, for grayscale images the gray value is in 'g' and if alpha + * is not present 'a' is set to 255 or 65535 according to format. + */ + int r, g, b, a; +} Pixel; + +typedef struct +{ + /* The background as the original sRGB 8-bit value converted to the final + * integer format and as a double precision linear value in the range 0..1 + * for with partially transparent pixels. + */ + int ir, ig, ib; + double dr, dg, db; /* linear r,g,b scaled to 0..1 */ +} Background; + +/* Basic image formats; control the data but not the layout thereof. */ +#define BASE_FORMATS\ + (PNG_FORMAT_FLAG_ALPHA|PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_LINEAR) + +/* Read a Pixel from a buffer. The code below stores the correct routine for + * the format in a function pointer, these are the routines: + */ +static void +gp_g8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = p->g = p->b = pp[0]; + p->a = 255; +} + +static void +gp_ga8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = p->g = p->b = pp[0]; + p->a = pp[1]; +} + +static void +gp_ag8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = p->g = p->b = pp[1]; + p->a = pp[0]; +} + +static void +gp_rgb8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[0]; + p->g = pp[1]; + p->b = pp[2]; + p->a = 255; +} + +static void +gp_bgr8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[2]; + p->g = pp[1]; + p->b = pp[0]; + p->a = 255; +} + +static void +gp_rgba8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[0]; + p->g = pp[1]; + p->b = pp[2]; + p->a = pp[3]; +} + +static void +gp_bgra8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[2]; + p->g = pp[1]; + p->b = pp[0]; + p->a = pp[3]; +} + +static void +gp_argb8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[1]; + p->g = pp[2]; + p->b = pp[3]; + p->a = pp[0]; +} + +static void +gp_abgr8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[3]; + p->g = pp[2]; + p->b = pp[1]; + p->a = pp[0]; +} + +static void +gp_g16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = p->g = p->b = pp[0]; + p->a = 65535; +} + +static void +gp_ga16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = p->g = p->b = pp[0]; + p->a = pp[1]; +} + +static void +gp_ag16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = p->g = p->b = pp[1]; + p->a = pp[0]; +} + +static void +gp_rgb16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[0]; + p->g = pp[1]; + p->b = pp[2]; + p->a = 65535; +} + +static void +gp_bgr16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[2]; + p->g = pp[1]; + p->b = pp[0]; + p->a = 65535; +} + +static void +gp_rgba16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[0]; + p->g = pp[1]; + p->b = pp[2]; + p->a = pp[3]; +} + +static void +gp_bgra16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[2]; + p->g = pp[1]; + p->b = pp[0]; + p->a = pp[3]; +} + +static void +gp_argb16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[1]; + p->g = pp[2]; + p->b = pp[3]; + p->a = pp[0]; +} + +static void +gp_abgr16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[3]; + p->g = pp[2]; + p->b = pp[1]; + p->a = pp[0]; +} + +/* Given a format, return the correct one of the above functions. */ +static void (* +get_pixel(png_uint_32 format))(Pixel *p, png_const_voidp pb) +{ + /* The color-map flag is irrelevant here - the caller of the function + * returned must either pass the buffer or, for a color-mapped image, the + * correct entry in the color-map. + */ + if (format & PNG_FORMAT_FLAG_LINEAR) + { + if (format & PNG_FORMAT_FLAG_COLOR) + { + if (format & PNG_FORMAT_FLAG_BGR) + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_abgr16; + + else + return gp_bgra16; + } + + else + return gp_bgr16; + } + + else + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_argb16; + + else + return gp_rgba16; + } + + else + return gp_rgb16; + } + } + + else + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_ag16; + + else + return gp_ga16; + } + + else + return gp_g16; + } + } + + else + { + if (format & PNG_FORMAT_FLAG_COLOR) + { + if (format & PNG_FORMAT_FLAG_BGR) + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_abgr8; + + else + return gp_bgra8; + } + + else + return gp_bgr8; + } + + else + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_argb8; + + else + return gp_rgba8; + } + + else + return gp_rgb8; + } + } + + else + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_ag8; + + else + return gp_ga8; + } + + else + return gp_g8; + } + } +} + +/* Convertion between pixel formats. The code above effectively eliminates the + * component ordering changes leaving three basic changes: + * + * 1) Remove an alpha channel by pre-multiplication or compositing on a + * background color. (Adding an alpha channel is a no-op.) + * + * 2) Remove color by mapping to grayscale. (Grayscale to color is a no-op.) + * + * 3) Convert between 8-bit and 16-bit components. (Both directtions are + * relevant.) + * + * This gives the following base format conversion matrix: + * + * OUT: ----- 8-bit ----- ----- 16-bit ----- + * IN G GA RGB RGBA G GA RGB RGBA + * 8 G . . . . lin lin lin lin + * 8 GA bckg . bckc . pre' pre pre' pre + * 8 RGB g8 g8 . . glin glin lin lin + * 8 RGBA g8b g8 bckc . gpr' gpre pre' pre + * 16 G sRGB sRGB sRGB sRGB . . . . + * 16 GA b16g unpg b16c unpc A . A . + * 16 RGB sG sG sRGB sRGB g16 g16 . . + * 16 RGBA gb16 sGp cb16 sCp g16 g16' A . + * + * 8-bit to 8-bit: + * bckg: composite on gray background + * bckc: composite on color background + * g8: convert sRGB components to sRGB grayscale + * g8b: convert sRGB components to grayscale and composite on gray background + * + * 8-bit to 16-bit: + * lin: make sRGB components linear, alpha := 65535 + * pre: make sRGB components linear and premultiply by alpha (scale alpha) + * pre': as 'pre' but alpha := 65535 + * glin: make sRGB components linear, convert to grayscale, alpha := 65535 + * gpre: make sRGB components grayscale and linear and premultiply by alpha + * gpr': as 'gpre' but alpha := 65535 + * + * 16-bit to 8-bit: + * sRGB: convert linear components to sRGB, alpha := 255 + * unpg: unpremultiply gray component and convert to sRGB (scale alpha) + * unpc: unpremultiply color components and convert to sRGB (scale alpha) + * b16g: composite linear onto gray background and convert the result to sRGB + * b16c: composite linear onto color background and convert the result to sRGB + * sG: convert linear RGB to sRGB grayscale + * sGp: unpremultiply RGB then convert to sRGB grayscale + * sCp: unpremultiply RGB then convert to sRGB + * gb16: composite linear onto background and convert to sRGB grayscale + * (order doesn't matter, the composite and grayscale operations permute) + * cb16: composite linear onto background and convert to sRGB + * + * 16-bit to 16-bit: + * A: set alpha to 65535 + * g16: convert linear RGB to linear grayscale (alpha := 65535) + * g16': as 'g16' but alpha is unchanged + */ +/* Simple copy: */ +static void +gpc_noop(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + out->r = in->r; + out->g = in->g; + out->b = in->b; + out->a = in->a; +} + +#if ALLOW_UNUSED_GPC +static void +gpc_nop8(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + if (in->a == 0) + out->r = out->g = out->b = 255; + + else + { + out->r = in->r; + out->g = in->g; + out->b = in->b; + } + + out->a = in->a; +} +#endif + +#if ALLOW_UNUSED_GPC +static void +gpc_nop6(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + if (in->a == 0) + out->r = out->g = out->b = 65535; + + else + { + out->r = in->r; + out->g = in->g; + out->b = in->b; + } + + out->a = in->a; +} +#endif + +/* 8-bit to 8-bit conversions */ +/* bckg: composite on gray background */ +static void +gpc_bckg(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + out->r = out->g = out->b = back->ig; + + else if (in->a >= 255) + out->r = out->g = out->b = in->g; + + else + { + double a = in->a / 255.; + + out->r = out->g = out->b = sRGB(sRGB_to_d[in->g] * a + back->dg * (1-a)); + } + + out->a = 255; +} + +/* bckc: composite on color background */ +static void +gpc_bckc(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + { + out->r = back->ir; + out->g = back->ig; + out->b = back->ib; + } + + else if (in->a >= 255) + { + out->r = in->r; + out->g = in->g; + out->b = in->b; + } + + else + { + double a = in->a / 255.; + + out->r = sRGB(sRGB_to_d[in->r] * a + back->dr * (1-a)); + out->g = sRGB(sRGB_to_d[in->g] * a + back->dg * (1-a)); + out->b = sRGB(sRGB_to_d[in->b] * a + back->db * (1-a)); + } + + out->a = 255; +} + +/* g8: convert sRGB components to sRGB grayscale */ +static void +gpc_g8(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = in->g; + + else + out->r = out->g = out->b = + sRGB(YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); + + out->a = in->a; +} + +/* g8b: convert sRGB components to grayscale and composite on gray background */ +static void +gpc_g8b(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + out->r = out->g = out->b = back->ig; + + else if (in->a >= 255) + { + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = in->g; + + else + out->r = out->g = out->b = sRGB(YfromRGB( + sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); + } + + else + { + double a = in->a/255.; + + out->r = out->g = out->b = sRGB(a * YfromRGB(sRGB_to_d[in->r], + sRGB_to_d[in->g], sRGB_to_d[in->b]) + back->dg * (1-a)); + } + + out->a = 255; +} + +/* 8-bit to 16-bit conversions */ +/* lin: make sRGB components linear, alpha := 65535 */ +static void +gpc_lin(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilinear(in->r); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilinear(in->b); + } + + else + { + out->g = ilinear(in->g); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilinear(in->b); + } + + out->a = 65535; +} + +/* pre: make sRGB components linear and premultiply by alpha (scale alpha) */ +static void +gpc_pre(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilineara(in->r, in->a); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilineara(in->b, in->a); + } + + else + { + out->g = ilineara(in->g, in->a); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilineara(in->b, in->a); + } + + out->a = in->a * 257; +} + +/* pre': as 'pre' but alpha := 65535 */ +static void +gpc_preq(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilineara(in->r, in->a); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilineara(in->b, in->a); + } + + else + { + out->g = ilineara(in->g, in->a); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilineara(in->b, in->a); + } + + out->a = 65535; +} + +/* glin: make sRGB components linear, convert to grayscale, alpha := 65535 */ +static void +gpc_glin(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilinear(in->g); + + else + out->r = out->g = out->b = u16d(65535 * + YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); + + out->a = 65535; +} + +/* gpre: make sRGB components grayscale and linear and premultiply by alpha */ +static void +gpc_gpre(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilineara(in->g, in->a); + + else + out->r = out->g = out->b = u16d(in->a * 257 * + YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); + + out->a = 257 * in->a; +} + +/* gpr': as 'gpre' but alpha := 65535 */ +static void +gpc_gprq(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilineara(in->g, in->a); + + else + out->r = out->g = out->b = u16d(in->a * 257 * + YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); + + out->a = 65535; +} + +/* 8-bit to 16-bit conversions for gAMA 45455 encoded values */ +/* Lin: make gAMA 45455 components linear, alpha := 65535 */ +static void +gpc_Lin(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilinear_g22(in->r); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilinear_g22(in->b); + } + + else + { + out->g = ilinear_g22(in->g); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilinear_g22(in->b); + } + + out->a = 65535; +} + +#if ALLOW_UNUSED_GPC +/* Pre: make gAMA 45455 components linear and premultiply by alpha (scale alpha) + */ +static void +gpc_Pre(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilineara_g22(in->r, in->a); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilineara_g22(in->b, in->a); + } + + else + { + out->g = ilineara_g22(in->g, in->a); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilineara_g22(in->b, in->a); + } + + out->a = in->a * 257; +} +#endif + +#if ALLOW_UNUSED_GPC +/* Pre': as 'Pre' but alpha := 65535 */ +static void +gpc_Preq(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilineara_g22(in->r, in->a); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilineara_g22(in->b, in->a); + } + + else + { + out->g = ilineara_g22(in->g, in->a); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilineara_g22(in->b, in->a); + } + + out->a = 65535; +} +#endif + +#if ALLOW_UNUSED_GPC +/* Glin: make gAMA 45455 components linear, convert to grayscale, alpha := 65535 + */ +static void +gpc_Glin(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilinear_g22(in->g); + + else + out->r = out->g = out->b = u16d(65535 * + YfromRGB(g22_to_d[in->r], g22_to_d[in->g], g22_to_d[in->b])); + + out->a = 65535; +} +#endif + +#if ALLOW_UNUSED_GPC +/* Gpre: make gAMA 45455 components grayscale and linear and premultiply by + * alpha. + */ +static void +gpc_Gpre(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilineara_g22(in->g, in->a); + + else + out->r = out->g = out->b = u16d(in->a * 257 * + YfromRGB(g22_to_d[in->r], g22_to_d[in->g], g22_to_d[in->b])); + + out->a = 257 * in->a; +} +#endif + +#if ALLOW_UNUSED_GPC +/* Gpr': as 'Gpre' but alpha := 65535 */ +static void +gpc_Gprq(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilineara_g22(in->g, in->a); + + else + out->r = out->g = out->b = u16d(in->a * 257 * + YfromRGB(g22_to_d[in->r], g22_to_d[in->g], g22_to_d[in->b])); + + out->a = 65535; +} +#endif + +/* 16-bit to 8-bit conversions */ +/* sRGB: convert linear components to sRGB, alpha := 255 */ +static void +gpc_sRGB(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = isRGB(in->r); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = isRGB(in->b); + } + + else + { + out->g = isRGB(in->g); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = isRGB(in->b); + } + + out->a = 255; +} + +/* unpg: unpremultiply gray component and convert to sRGB (scale alpha) */ +static void +gpc_unpg(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->a <= 128) + { + out->r = out->g = out->b = 255; + out->a = 0; + } + + else + { + out->r = out->g = out->b = sRGB((double)in->g / in->a); + out->a = u8d(in->a / 257.); + } +} + +/* unpc: unpremultiply color components and convert to sRGB (scale alpha) */ +static void +gpc_unpc(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->a <= 128) + { + out->r = out->g = out->b = 255; + out->a = 0; + } + + else + { + out->r = sRGB((double)in->r / in->a); + out->g = sRGB((double)in->g / in->a); + out->b = sRGB((double)in->b / in->a); + out->a = u8d(in->a / 257.); + } +} + +/* b16g: composite linear onto gray background and convert the result to sRGB */ +static void +gpc_b16g(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + out->r = out->g = out->b = back->ig; + + else + { + double a = in->a/65535.; + double a1 = 1-a; + + a /= 65535; + out->r = out->g = out->b = sRGB(in->g * a + back->dg * a1); + } + + out->a = 255; +} + +/* b16c: composite linear onto color background and convert the result to sRGB*/ +static void +gpc_b16c(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + { + out->r = back->ir; + out->g = back->ig; + out->b = back->ib; + } + + else + { + double a = in->a/65535.; + double a1 = 1-a; + + a /= 65535; + out->r = sRGB(in->r * a + back->dr * a1); + out->g = sRGB(in->g * a + back->dg * a1); + out->b = sRGB(in->b * a + back->db * a1); + } + + out->a = 255; +} + +/* sG: convert linear RGB to sRGB grayscale */ +static void +gpc_sG(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = out->g = out->b = sRGB(YfromRGBint(in->r, in->g, in->b)/65535); + out->a = 255; +} + +/* sGp: unpremultiply RGB then convert to sRGB grayscale */ +static void +gpc_sGp(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->a <= 128) + { + out->r = out->g = out->b = 255; + out->a = 0; + } + + else + { + out->r = out->g = out->b = sRGB(YfromRGBint(in->r, in->g, in->b)/in->a); + out->a = u8d(in->a / 257.); + } +} + +/* sCp: unpremultiply RGB then convert to sRGB */ +static void +gpc_sCp(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->a <= 128) + { + out->r = out->g = out->b = 255; + out->a = 0; + } + + else + { + out->r = sRGB((double)in->r / in->a); + out->g = sRGB((double)in->g / in->a); + out->b = sRGB((double)in->b / in->a); + out->a = u8d(in->a / 257.); + } +} + +/* gb16: composite linear onto background and convert to sRGB grayscale */ +/* (order doesn't matter, the composite and grayscale operations permute) */ +static void +gpc_gb16(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + out->r = out->g = out->b = back->ig; + + else if (in->a >= 65535) + out->r = out->g = out->b = isRGB(in->g); + + else + { + double a = in->a / 65535.; + double a1 = 1-a; + + a /= 65535; + out->r = out->g = out->b = sRGB(in->g * a + back->dg * a1); + } + + out->a = 255; +} + +/* cb16: composite linear onto background and convert to sRGB */ +static void +gpc_cb16(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + { + out->r = back->ir; + out->g = back->ig; + out->b = back->ib; + } + + else if (in->a >= 65535) + { + out->r = isRGB(in->r); + out->g = isRGB(in->g); + out->b = isRGB(in->b); + } + + else + { + double a = in->a / 65535.; + double a1 = 1-a; + + a /= 65535; + out->r = sRGB(in->r * a + back->dr * a1); + out->g = sRGB(in->g * a + back->dg * a1); + out->b = sRGB(in->b * a + back->db * a1); + } + + out->a = 255; +} + +/* 16-bit to 16-bit conversions */ +/* A: set alpha to 65535 */ +static void +gpc_A(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + out->r = in->r; + out->g = in->g; + out->b = in->b; + out->a = 65535; +} + +/* g16: convert linear RGB to linear grayscale (alpha := 65535) */ +static void +gpc_g16(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + out->r = out->g = out->b = u16d(YfromRGBint(in->r, in->g, in->b)); + out->a = 65535; +} + +/* g16': as 'g16' but alpha is unchanged */ +static void +gpc_g16q(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + out->r = out->g = out->b = u16d(YfromRGBint(in->r, in->g, in->b)); + out->a = in->a; +} + +#if ALLOW_UNUSED_GPC +/* Unused functions (to hide them from GCC unused function warnings) */ +void (* const gpc_unused[]) + (Pixel *out, const Pixel *in, const Background *back) = +{ + gpc_Pre, gpc_Preq, gpc_Glin, gpc_Gpre, gpc_Gprq, gpc_nop8, gpc_nop6 +}; +#endif + +/* OUT: ----- 8-bit ----- ----- 16-bit ----- + * IN G GA RGB RGBA G GA RGB RGBA + * 8 G . . . . lin lin lin lin + * 8 GA bckg . bckc . pre' pre pre' pre + * 8 RGB g8 g8 . . glin glin lin lin + * 8 RGBA g8b g8 bckc . gpr' gpre pre' pre + * 16 G sRGB sRGB sRGB sRGB . . . . + * 16 GA b16g unpg b16c unpc A . A . + * 16 RGB sG sG sRGB sRGB g16 g16 . . + * 16 RGBA gb16 sGp cb16 sCp g16 g16' A . + * + * The matrix is held in an array indexed thus: + * + * gpc_fn[out_format & BASE_FORMATS][in_format & BASE_FORMATS]; + */ +/* This will produce a compile time error if the FORMAT_FLAG values don't + * match the above matrix! + */ +#if PNG_FORMAT_FLAG_ALPHA == 1 && PNG_FORMAT_FLAG_COLOR == 2 &&\ + PNG_FORMAT_FLAG_LINEAR == 4 +static void (* const gpc_fn[8/*in*/][8/*out*/]) + (Pixel *out, const Pixel *in, const Background *back) = +{ +/*out: G-8 GA-8 RGB-8 RGBA-8 G-16 GA-16 RGB-16 RGBA-16 */ + {gpc_noop,gpc_noop,gpc_noop,gpc_noop, gpc_Lin, gpc_Lin, gpc_Lin, gpc_Lin }, + {gpc_bckg,gpc_noop,gpc_bckc,gpc_noop, gpc_preq,gpc_pre, gpc_preq,gpc_pre }, + {gpc_g8, gpc_g8, gpc_noop,gpc_noop, gpc_glin,gpc_glin,gpc_lin, gpc_lin }, + {gpc_g8b, gpc_g8, gpc_bckc,gpc_noop, gpc_gprq,gpc_gpre,gpc_preq,gpc_pre }, + {gpc_sRGB,gpc_sRGB,gpc_sRGB,gpc_sRGB, gpc_noop,gpc_noop,gpc_noop,gpc_noop}, + {gpc_b16g,gpc_unpg,gpc_b16c,gpc_unpc, gpc_A, gpc_noop,gpc_A, gpc_noop}, + {gpc_sG, gpc_sG, gpc_sRGB,gpc_sRGB, gpc_g16, gpc_g16, gpc_noop,gpc_noop}, + {gpc_gb16,gpc_sGp, gpc_cb16,gpc_sCp, gpc_g16, gpc_g16q,gpc_A, gpc_noop} +}; + +/* The array is repeated for the cases where both the input and output are color + * mapped because then different algorithms are used. + */ +static void (* const gpc_fn_colormapped[8/*in*/][8/*out*/]) + (Pixel *out, const Pixel *in, const Background *back) = +{ +/*out: G-8 GA-8 RGB-8 RGBA-8 G-16 GA-16 RGB-16 RGBA-16 */ + {gpc_noop,gpc_noop,gpc_noop,gpc_noop, gpc_lin, gpc_lin, gpc_lin, gpc_lin }, + {gpc_bckg,gpc_noop,gpc_bckc,gpc_noop, gpc_preq,gpc_pre, gpc_preq,gpc_pre }, + {gpc_g8, gpc_g8, gpc_noop,gpc_noop, gpc_glin,gpc_glin,gpc_lin, gpc_lin }, + {gpc_g8b, gpc_g8, gpc_bckc,gpc_noop, gpc_gprq,gpc_gpre,gpc_preq,gpc_pre }, + {gpc_sRGB,gpc_sRGB,gpc_sRGB,gpc_sRGB, gpc_noop,gpc_noop,gpc_noop,gpc_noop}, + {gpc_b16g,gpc_unpg,gpc_b16c,gpc_unpc, gpc_A, gpc_noop,gpc_A, gpc_noop}, + {gpc_sG, gpc_sG, gpc_sRGB,gpc_sRGB, gpc_g16, gpc_g16, gpc_noop,gpc_noop}, + {gpc_gb16,gpc_sGp, gpc_cb16,gpc_sCp, gpc_g16, gpc_g16q,gpc_A, gpc_noop} +}; + +/* The error arrays record the error in the same matrix; 64 entries, however + * the different algorithms used in libpng for colormap and direct conversions + * mean that four separate matrices are used (for each combination of + * colormapped and direct.) + * + * In some cases the conversion between sRGB formats goes via a linear + * intermediate; an sRGB to linear conversion (as above) is followed by a simple + * linear to sRGB step with no other conversions. This is done by a separate + * error array from an arbitrary 'in' format to one of the four basic outputs + * (since final output is always sRGB not colormapped). + * + * These arrays may be modified if the --accumulate flag is set during the run; + * then instead of logging errors they are simply added in. + * + * The three entries are currently for transparent, partially transparent and + * opaque input pixel values. Notice that alpha should be exact in each case. + * + * Errors in alpha should only occur when converting from a direct format + * to a colormapped format, when alpha is effectively smashed (so large + * errors can occur.) There should be no error in the '0' and 'opaque' + * values. The fourth entry in the array is used for the alpha error (and it + * should always be zero for the 'via linear' case since this is never color + * mapped.) + * + * Mapping to a colormap smashes the colors, it is necessary to have separate + * values for these cases because they are much larger; it is very much + * impossible to obtain a reasonable result, these are held in + * gpc_error_to_colormap. + */ +#if PNG_FORMAT_FLAG_COLORMAP == 8 /* extra check also required */ +/* START MACHINE GENERATED */ +static png_uint_16 gpc_error[16/*in*/][16/*out*/][4/*a*/] = +{ + { /* input: sRGB-gray */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 372, 0 }, { 0, 0, 372, 0 }, { 0, 0, 372, 0 }, { 0, 0, 372, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: sRGB-gray+alpha */ + { 0, 18, 0, 0 }, { 0, 0, 0, 0 }, { 0, 20, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 897, 788, 0 }, { 0, 897, 788, 0 }, { 0, 897, 788, 0 }, { 0, 897, 788, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: sRGB-rgb */ + { 0, 0, 19, 0 }, { 0, 0, 19, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 893, 0 }, { 0, 0, 893, 0 }, { 0, 0, 811, 0 }, { 0, 0, 811, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: sRGB-rgb+alpha */ + { 0, 4, 13, 0 }, { 0, 14, 13, 0 }, { 0, 19, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 832, 764, 0 }, { 0, 832, 764, 0 }, { 0, 897, 788, 0 }, { 0, 897, 788, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: linear-gray */ + { 0, 0, 9, 0 }, { 0, 0, 9, 0 }, { 0, 0, 9, 0 }, { 0, 0, 9, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: linear-gray+alpha */ + { 0, 74, 9, 0 }, { 0, 20, 9, 0 }, { 0, 74, 9, 0 }, { 0, 20, 9, 0 }, + { 0, 0, 0, 0 }, { 0, 1, 0, 0 }, { 0, 0, 0, 0 }, { 0, 1, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: linear-rgb */ + { 0, 0, 9, 0 }, { 0, 0, 9, 0 }, { 0, 0, 9, 0 }, { 0, 0, 9, 0 }, + { 0, 0, 4, 0 }, { 0, 0, 4, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: linear-rgb+alpha */ + { 0, 126, 143, 0 }, { 0, 9, 7, 0 }, { 0, 74, 9, 0 }, { 0, 16, 9, 0 }, + { 0, 4, 4, 0 }, { 0, 5, 4, 0 }, { 0, 0, 0, 0 }, { 0, 1, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: color-mapped-sRGB-gray */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: color-mapped-sRGB-gray+alpha */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: color-mapped-sRGB-rgb */ + { 0, 0, 13, 0 }, { 0, 0, 13, 0 }, { 0, 0, 8, 0 }, { 0, 0, 8, 0 }, + { 0, 0, 673, 0 }, { 0, 0, 673, 0 }, { 0, 0, 674, 0 }, { 0, 0, 674, 0 }, + { 0, 0, 1, 0 }, { 0, 0, 1, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 460, 0 }, { 0, 0, 460, 0 }, { 0, 0, 263, 0 }, { 0, 0, 263, 0 } + }, { /* input: color-mapped-sRGB-rgb+alpha */ + { 0, 6, 8, 0 }, { 0, 7, 8, 0 }, { 0, 75, 8, 0 }, { 0, 9, 8, 0 }, + { 0, 585, 427, 0 }, { 0, 585, 427, 0 }, { 0, 717, 409, 0 }, { 0, 717, 409, 0 }, + { 0, 1, 1, 0 }, { 0, 1, 1, 0 }, { 0, 1, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 13323, 460, 0 }, { 0, 334, 460, 0 }, { 0, 16480, 263, 0 }, { 0, 243, 263, 0 } + }, { /* input: color-mapped-linear-gray */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 282, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: color-mapped-linear-gray+alpha */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 253, 282, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: color-mapped-linear-rgb */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 265, 0 }, { 0, 0, 0, 0 } + }, { /* input: color-mapped-linear-rgb+alpha */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 243, 265, 0 } + } +}; +static png_uint_16 gpc_error_via_linear[16][4/*out*/][4] = +{ + { /* input: sRGB-gray */ + { 0, 0, 7, 0 }, { 0, 0, 7, 0 }, { 0, 0, 7, 0 }, { 0, 0, 7, 0 } + }, { /* input: sRGB-gray+alpha */ + { 0, 15, 15, 0 }, { 0, 186, 15, 0 }, { 0, 15, 15, 0 }, { 0, 186, 15, 0 } + }, { /* input: sRGB-rgb */ + { 0, 0, 19, 0 }, { 0, 0, 19, 0 }, { 0, 0, 15, 0 }, { 0, 0, 15, 0 } + }, { /* input: sRGB-rgb+alpha */ + { 0, 12, 14, 0 }, { 0, 180, 14, 0 }, { 0, 14, 15, 0 }, { 0, 186, 15, 0 } + }, { /* input: linear-gray */ + { 0, 0, 1, 0 }, { 0, 0, 1, 0 }, { 0, 0, 1, 0 }, { 0, 0, 1, 0 } + }, { /* input: linear-gray+alpha */ + { 0, 1, 1, 0 }, { 0, 1, 1, 0 }, { 0, 1, 1, 0 }, { 0, 1, 1, 0 } + }, { /* input: linear-rgb */ + { 0, 0, 1, 0 }, { 0, 0, 1, 0 }, { 0, 0, 1, 0 }, { 0, 0, 1, 0 } + }, { /* input: linear-rgb+alpha */ + { 0, 1, 1, 0 }, { 0, 8, 1, 0 }, { 0, 1, 1, 0 }, { 0, 1, 1, 0 } + }, { /* input: color-mapped-sRGB-gray */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: color-mapped-sRGB-gray+alpha */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: color-mapped-sRGB-rgb */ + { 0, 0, 13, 0 }, { 0, 0, 13, 0 }, { 0, 0, 14, 0 }, { 0, 0, 14, 0 } + }, { /* input: color-mapped-sRGB-rgb+alpha */ + { 0, 4, 8, 0 }, { 0, 9, 8, 0 }, { 0, 8, 3, 0 }, { 0, 32, 3, 0 } + }, { /* input: color-mapped-linear-gray */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: color-mapped-linear-gray+alpha */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: color-mapped-linear-rgb */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + }, { /* input: color-mapped-linear-rgb+alpha */ + { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 } + } +}; +static png_uint_16 gpc_error_to_colormap[8/*i*/][8/*o*/][4] = +{ + { /* input: sRGB-gray */ + { 0, 0, 9, 0 }, { 0, 0, 9, 0 }, { 0, 0, 9, 0 }, { 0, 0, 9, 0 }, + { 0, 0, 560, 0 }, { 0, 0, 560, 0 }, { 0, 0, 560, 0 }, { 0, 0, 560, 0 } + }, { /* input: sRGB-gray+alpha */ + { 0, 19, 2, 0 }, { 0, 255, 2, 25 }, { 0, 88, 2, 0 }, { 0, 255, 2, 25 }, + { 0, 1012, 745, 0 }, { 0, 16026, 745, 6425 }, { 0, 1012, 745, 0 }, { 0, 16026, 745, 6425 } + }, { /* input: sRGB-rgb */ + { 0, 0, 19, 0 }, { 0, 0, 19, 0 }, { 0, 0, 25, 0 }, { 0, 0, 25, 0 }, + { 0, 0, 937, 0 }, { 0, 0, 937, 0 }, { 0, 0, 13677, 0 }, { 0, 0, 13677, 0 } + }, { /* input: sRGB-rgb+alpha */ + { 0, 63, 77, 0 }, { 0, 255, 19, 25 }, { 0, 220, 25, 0 }, { 0, 255, 25, 67 }, + { 0, 17534, 18491, 0 }, { 0, 15614, 2824, 6425 }, { 0, 14019, 13677, 0 }, { 0, 48573, 13677, 17219 } + }, { /* input: linear-gray */ + { 0, 0, 73, 0 }, { 0, 0, 73, 0 }, { 0, 0, 73, 0 }, { 0, 0, 73, 0 }, + { 0, 0, 18817, 0 }, { 0, 0, 18817, 0 }, { 0, 0, 18817, 0 }, { 0, 0, 18817, 0 } + }, { /* input: linear-gray+alpha */ + { 0, 74, 74, 0 }, { 0, 255, 74, 25 }, { 0, 97, 74, 0 }, { 0, 255, 74, 25 }, + { 0, 18919, 18907, 0 }, { 0, 24549, 18907, 6552 }, { 0, 18919, 18907, 0 }, { 0, 24549, 18907, 6552 } + }, { /* input: linear-rgb */ + { 0, 0, 73, 0 }, { 0, 0, 73, 0 }, { 0, 0, 98, 0 }, { 0, 0, 98, 0 }, + { 0, 0, 18664, 0 }, { 0, 0, 18664, 0 }, { 0, 0, 24998, 0 }, { 0, 0, 24998, 0 } + }, { /* input: linear-rgb+alpha */ + { 0, 181, 196, 0 }, { 0, 255, 61, 25 }, { 206, 187, 98, 0 }, { 0, 255, 98, 67 }, + { 0, 18141, 18137, 0 }, { 0, 17494, 17504, 6553 }, { 0, 24979, 24992, 0 }, { 0, 46509, 24992, 17347 } + } +}; +/* END MACHINE GENERATED */ +#endif /* COLORMAP flag check */ +#endif /* flag checks */ + +typedef struct +{ + /* Basic pixel information: */ + Image* in_image; /* Input image */ + const Image* out_image; /* Output image */ + + /* 'background' is the value passed to the gpc_ routines, it may be NULL if + * it should not be used (*this* program has an error if it crashes as a + * result!) + */ + Background background_color; + const Background* background; + + /* Precalculated values: */ + int in_opaque; /* Value of input alpha that is opaque */ + int is_palette; /* Sample values come from the palette */ + int accumulate; /* Accumlate component errors (don't log) */ + int output_8bit; /* Output is 8 bit (else 16 bit) */ + + void (*in_gp)(Pixel*, png_const_voidp); + void (*out_gp)(Pixel*, png_const_voidp); + + void (*transform)(Pixel *out, const Pixel *in, const Background *back); + /* A function to perform the required transform */ + + void (*from_linear)(Pixel *out, const Pixel *in, const Background *back); + /* For 'via_linear' transforms the final, from linear, step, else NULL */ + + png_uint_16 error[4]; + /* Three error values for transparent, partially transparent and opaque + * input pixels (in turn). + */ + + png_uint_16 *error_ptr; + /* Where these are stored in the static array (for 'accumulate') */ +} +Transform; + +/* Return a 'transform' as above for the given format conversion. */ +static void +transform_from_formats(Transform *result, Image *in_image, + const Image *out_image, png_const_colorp background, int via_linear) +{ + png_uint_32 in_format, out_format; + png_uint_32 in_base, out_base; + + memset(result, 0, sizeof *result); + + /* Store the original images for error messages */ + result->in_image = in_image; + result->out_image = out_image; + + in_format = in_image->image.format; + out_format = out_image->image.format; + + if (in_format & PNG_FORMAT_FLAG_LINEAR) + result->in_opaque = 65535; + else + result->in_opaque = 255; + + result->output_8bit = (out_format & PNG_FORMAT_FLAG_LINEAR) == 0; + + result->is_palette = 0; /* set by caller if required */ + result->accumulate = (in_image->opts & ACCUMULATE) != 0; + + /* The loaders (which need the ordering information) */ + result->in_gp = get_pixel(in_format); + result->out_gp = get_pixel(out_format); + + /* Remove the ordering information: */ + in_format &= BASE_FORMATS | PNG_FORMAT_FLAG_COLORMAP; + in_base = in_format & BASE_FORMATS; + out_format &= BASE_FORMATS | PNG_FORMAT_FLAG_COLORMAP; + out_base = out_format & BASE_FORMATS; + + if (via_linear) + { + /* Check for an error in this program: */ + if (out_format & (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLORMAP)) + { + fprintf(stderr, "internal transform via linear error 0x%x->0x%x\n", + in_format, out_format); + exit(1); + } + + result->transform = gpc_fn[in_base][out_base | PNG_FORMAT_FLAG_LINEAR]; + result->from_linear = gpc_fn[out_base | PNG_FORMAT_FLAG_LINEAR][out_base]; + result->error_ptr = gpc_error_via_linear[in_format][out_format]; + } + + else if (~in_format & out_format & PNG_FORMAT_FLAG_COLORMAP) + { + /* The input is not colormapped but the output is, the errors will + * typically be large (only the grayscale-no-alpha case permits preserving + * even 8-bit values.) + */ + result->transform = gpc_fn[in_base][out_base]; + result->from_linear = NULL; + result->error_ptr = gpc_error_to_colormap[in_base][out_base]; + } + + else + { + /* The caller handles the colormap->pixel value conversion, so the + * transform function just gets a pixel value, however because libpng + * currently contains a different implementation for mapping a colormap if + * both input and output are colormapped we need different conversion + * functions to deal with errors in the libpng implementation. + */ + if (in_format & out_format & PNG_FORMAT_FLAG_COLORMAP) + result->transform = gpc_fn_colormapped[in_base][out_base]; + else + result->transform = gpc_fn[in_base][out_base]; + result->from_linear = NULL; + result->error_ptr = gpc_error[in_format][out_format]; + } + + /* Follow the libpng simplified API rules to work out what to pass to the gpc + * routines as a background value, if one is not required pass NULL so that + * this program crashes in the even of a programming error. + */ + result->background = NULL; /* default: not required */ + + /* Rule 1: background only need be supplied if alpha is to be removed */ + if (in_format & ~out_format & PNG_FORMAT_FLAG_ALPHA) + { + /* The input value is 'NULL' to use the background and (otherwise) an sRGB + * background color (to use a solid color). The code above uses a fixed + * byte value, BUFFER_INIT8, for buffer even for 16-bit output. For + * linear (16-bit) output the sRGB background color is ignored; the + * composition is always on the background (so BUFFER_INIT8 * 257), except + * that for the colormap (i.e. linear colormapped output) black is used. + */ + result->background = &result->background_color; + + if (out_format & PNG_FORMAT_FLAG_LINEAR || via_linear) + { + if (out_format & PNG_FORMAT_FLAG_COLORMAP) + { + result->background_color.ir = + result->background_color.ig = + result->background_color.ib = 0; + result->background_color.dr = + result->background_color.dg = + result->background_color.db = 0; + } + + else + { + result->background_color.ir = + result->background_color.ig = + result->background_color.ib = BUFFER_INIT8 * 257; + result->background_color.dr = + result->background_color.dg = + result->background_color.db = 0; + } + } + + else /* sRGB output */ + { + if (background != NULL) + { + if (out_format & PNG_FORMAT_FLAG_COLOR) + { + result->background_color.ir = background->red; + result->background_color.ig = background->green; + result->background_color.ib = background->blue; + /* TODO: sometimes libpng uses the power law conversion here, how + * to handle this? + */ + result->background_color.dr = sRGB_to_d[background->red]; + result->background_color.dg = sRGB_to_d[background->green]; + result->background_color.db = sRGB_to_d[background->blue]; + } + + else /* grayscale: libpng only looks at 'g' */ + { + result->background_color.ir = + result->background_color.ig = + result->background_color.ib = background->green; + /* TODO: sometimes libpng uses the power law conversion here, how + * to handle this? + */ + result->background_color.dr = + result->background_color.dg = + result->background_color.db = sRGB_to_d[background->green]; + } + } + + else if ((out_format & PNG_FORMAT_FLAG_COLORMAP) == 0) + { + result->background_color.ir = + result->background_color.ig = + result->background_color.ib = BUFFER_INIT8; + /* TODO: sometimes libpng uses the power law conversion here, how + * to handle this? + */ + result->background_color.dr = + result->background_color.dg = + result->background_color.db = sRGB_to_d[BUFFER_INIT8]; + } + + /* Else the output is colormapped and a background color must be + * provided; if pngstest crashes then that is a bug in this program + * (though libpng should png_error as well.) + */ + else + result->background = NULL; + } + } + + if (result->background == NULL) + { + result->background_color.ir = + result->background_color.ig = + result->background_color.ib = -1; /* not used */ + result->background_color.dr = + result->background_color.dg = + result->background_color.db = 1E30; /* not used */ + } + + + /* Copy the error values into the Transform: */ + result->error[0] = result->error_ptr[0]; + result->error[1] = result->error_ptr[1]; + result->error[2] = result->error_ptr[2]; + result->error[3] = result->error_ptr[3]; +} + + +/* Compare two pixels. + * + * OLD error values: +static int error_to_linear = 811; * by experiment * +static int error_to_linear_grayscale = 424; * by experiment * +static int error_to_sRGB = 6; * by experiment * +static int error_to_sRGB_grayscale = 17; * libpng error by calculation + + 2 by experiment * +static int error_in_compose = 2; * by experiment * +static int error_in_premultiply = 1; + * + * The following is *just* the result of a round trip from 8-bit sRGB to linear + * then back to 8-bit sRGB when it is done by libpng. There are two problems: + * + * 1) libpng currently uses a 2.2 power law with no linear segment, this results + * in instability in the low values and even with 16-bit precision sRGB(1) ends + * up mapping to sRGB(0) as a result of rounding in the 16-bit representation. + * This gives an error of 1 in the handling of value 1 only. + * + * 2) libpng currently uses an intermediate 8-bit linear value in gamma + * correction of 8-bit values. This results in many more errors, the worse of + * which is mapping sRGB(14) to sRGB(0). + * + * The general 'error_via_linear' is more complex because of pre-multiplication, + * this compounds the 8-bit errors according to the alpha value of the pixel. + * As a result 256 values are pre-calculated for error_via_linear. + */ +#if 0 +static int error_in_libpng_gamma; +static int error_via_linear[256]; /* Indexed by 8-bit alpha */ + +static void +init_error_via_linear(void) +{ + int alpha; + + error_via_linear[0] = 255; /* transparent pixel */ + + for (alpha=1; alpha<=255; ++alpha) + { + /* 16-bit values less than 128.5 get rounded to 8-bit 0 and so the worst + * case error arises with 16-bit 128.5, work out what sRGB + * (non-associated) value generates 128.5; any value less than this is + * going to map to 0, so the worst error is floor(value). + * + * Note that errors are considerably higher (more than a factor of 2) + * because libpng uses a simple power law for sRGB data at present. + * + * Add .1 for arithmetic errors inside libpng. + */ + double v = floor(255*pow(.5/*(128.5 * 255 / 65535)*/ / alpha, 1/2.2)+.1); + + error_via_linear[alpha] = (int)v; + } + + /* This is actually 14.99, but, despite the closeness to 15, 14 seems to work + * ok in this case. + */ + error_in_libpng_gamma = 14; +} +#endif + +static void +print_pixel(char string[64], const Pixel *pixel, png_uint_32 format) +{ + switch (format & (PNG_FORMAT_FLAG_ALPHA|PNG_FORMAT_FLAG_COLOR)) + { + case 0: + sprintf(string, "%s(%d)", format_names[format], pixel->g); + break; + + case PNG_FORMAT_FLAG_ALPHA: + sprintf(string, "%s(%d,%d)", format_names[format], pixel->g, + pixel->a); + break; + + case PNG_FORMAT_FLAG_COLOR: + sprintf(string, "%s(%d,%d,%d)", format_names[format], + pixel->r, pixel->g, pixel->b); + break; + + case PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA: + sprintf(string, "%s(%d,%d,%d,%d)", format_names[format], + pixel->r, pixel->g, pixel->b, pixel->a); + break; + + default: + sprintf(string, "invalid-format"); + break; + } +} + +static int +logpixel(const Transform *transform, png_uint_32 x, png_uint_32 y, + const Pixel *in, const Pixel *calc, const Pixel *out, const char *reason) +{ + const png_uint_32 in_format = transform->in_image->image.format; + const png_uint_32 out_format = transform->out_image->image.format; + + png_uint_32 back_format = out_format & ~PNG_FORMAT_FLAG_ALPHA; + const char *via_linear = ""; + + char pixel_in[64], pixel_calc[64], pixel_out[64], pixel_loc[64]; + char background_info[100]; + + print_pixel(pixel_in, in, in_format); + print_pixel(pixel_calc, calc, out_format); + print_pixel(pixel_out, out, out_format); + + if (transform->is_palette) + sprintf(pixel_loc, "palette: %lu", (unsigned long)y); + else + sprintf(pixel_loc, "%lu,%lu", (unsigned long)x, (unsigned long)y); + + if (transform->from_linear != NULL) + { + via_linear = " (via linear)"; + /* And as a result the *read* format which did any background processing + * was itself linear, so the background color information is also + * linear. + */ + back_format |= PNG_FORMAT_FLAG_LINEAR; + } + + if (transform->background != NULL) + { + Pixel back; + char pixel_back[64]; + + back.r = transform->background->ir; + back.g = transform->background->ig; + back.b = transform->background->ib; + back.a = -1; /* not used */ + + print_pixel(pixel_back, &back, back_format); + sprintf(background_info, " on background %s", pixel_back); + } + + else + background_info[0] = 0; + + if (transform->in_image->file_name != transform->out_image->file_name) + { + char error_buffer[512]; + sprintf(error_buffer, + "(%s) %s error%s:\n %s%s ->\n %s\n not: %s.\n" + "Use --preserve and examine: ", pixel_loc, reason, via_linear, + pixel_in, background_info, pixel_out, pixel_calc); + return logerror(transform->in_image, transform->in_image->file_name, + error_buffer, transform->out_image->file_name); + } + + else + { + char error_buffer[512]; + sprintf(error_buffer, + "(%s) %s error%s:\n %s%s ->\n %s\n not: %s.\n" + " The error happened when reading the original file with this format.", + pixel_loc, reason, via_linear, pixel_in, background_info, pixel_out, + pixel_calc); + return logerror(transform->in_image, transform->in_image->file_name, + error_buffer, ""); + } +} + +static int +cmppixel(Transform *transform, png_const_voidp in, png_const_voidp out, + png_uint_32 x, png_uint_32 y/*or palette index*/) +{ + int maxerr; + png_const_charp errmsg; + Pixel pixel_in, pixel_calc, pixel_out; + + transform->in_gp(&pixel_in, in); + + if (transform->from_linear == NULL) + transform->transform(&pixel_calc, &pixel_in, transform->background); + + else + { + transform->transform(&pixel_out, &pixel_in, transform->background); + transform->from_linear(&pixel_calc, &pixel_out, NULL); + } + + transform->out_gp(&pixel_out, out); + + /* Eliminate the case where the input and output values match exactly. */ + if (pixel_calc.a == pixel_out.a && pixel_calc.r == pixel_out.r && + pixel_calc.g == pixel_out.g && pixel_calc.b == pixel_out.b) + return 1; + + /* Eliminate the case where the output pixel is transparent and the output + * is 8-bit - any component values are valid. Don't check the input alpha + * here to also skip the 16-bit small alpha cases. + */ + if (transform->output_8bit && pixel_calc.a == 0 && pixel_out.a == 0) + return 1; + + /* Check for alpha errors first; an alpha error can damage the components too + * so avoid spurious checks on components if one is found. + */ + errmsg = NULL; + { + int err_a = abs(pixel_calc.a-pixel_out.a); + + if (err_a > transform->error[3]) + { + /* If accumulating check the components too */ + if (transform->accumulate) + transform->error[3] = (png_uint_16)err_a; + + else + errmsg = "alpha"; + } + } + + /* Now if *either* of the output alphas are 0 but alpha is within tolerance + * eliminate the 8-bit component comparison. + */ + if (errmsg == NULL && transform->output_8bit && + (pixel_calc.a == 0 || pixel_out.a == 0)) + return 1; + + if (errmsg == NULL) /* else just signal an alpha error */ + { + int err_r = abs(pixel_calc.r - pixel_out.r); + int err_g = abs(pixel_calc.g - pixel_out.g); + int err_b = abs(pixel_calc.b - pixel_out.b); + int limit; + + if ((err_r | err_g | err_b) == 0) + return 1; /* exact match */ + + /* Mismatch on a component, check the input alpha */ + if (pixel_in.a >= transform->in_opaque) + { + errmsg = "opaque component"; + limit = 2; /* opaque */ + } + + else if (pixel_in.a > 0) + { + errmsg = "alpha component"; + limit = 1; /* partially transparent */ + } + + else + { + errmsg = "transparent component (background)"; + limit = 0; /* transparent */ + } + + maxerr = err_r; + if (maxerr < err_g) maxerr = err_g; + if (maxerr < err_b) maxerr = err_b; + + if (maxerr <= transform->error[limit]) + return 1; /* within the error limits */ + + /* Handle a component mis-match; log it, just return an error code, or + * accumulate it. + */ + if (transform->accumulate) + { + transform->error[limit] = (png_uint_16)maxerr; + return 1; /* to cause the caller to keep going */ + } + } + + /* Failure to match and not accumulating, so the error must be logged. */ + return logpixel(transform, x, y, &pixel_in, &pixel_calc, &pixel_out, errmsg); +} + +static png_byte +component_loc(png_byte loc[4], png_uint_32 format) +{ + /* Given a format return the number of channels and the location of + * each channel. + * + * The mask 'loc' contains the component offset of the channels in the + * following order. Note that if 'format' is grayscale the entries 1-3 must + * all contain the location of the gray channel. + * + * 0: alpha + * 1: red or gray + * 2: green or gray + * 3: blue or gray + */ + png_byte channels; + + if (format & PNG_FORMAT_FLAG_COLOR) + { + channels = 3; + + loc[2] = 1; + + if (format & PNG_FORMAT_FLAG_BGR) + { + loc[1] = 2; + loc[3] = 0; + } + + else + { + loc[1] = 0; + loc[3] = 2; + } + } + + else + { + channels = 1; + loc[1] = loc[2] = loc[3] = 0; + } + + if (format & PNG_FORMAT_FLAG_ALPHA) + { + if (format & PNG_FORMAT_FLAG_AFIRST) + { + loc[0] = 0; + ++loc[1]; + ++loc[2]; + ++loc[3]; + } + + else + loc[0] = channels; + + ++channels; + } + + else + loc[0] = 4; /* not present */ + + return channels; +} + +/* Compare two images, the original 'a', which was written out then read back in + * to * give image 'b'. The formats may have been changed. + */ +static int +compare_two_images(Image *a, Image *b, int via_linear, + png_const_colorp background) +{ + ptrdiff_t stridea = a->stride; + ptrdiff_t strideb = b->stride; + png_const_bytep rowa = a->buffer+16; + png_const_bytep rowb = b->buffer+16; + const png_uint_32 width = a->image.width; + const png_uint_32 height = a->image.height; + const png_uint_32 formata = a->image.format; + const png_uint_32 formatb = b->image.format; + const unsigned int a_sample = PNG_IMAGE_SAMPLE_SIZE(formata); + const unsigned int b_sample = PNG_IMAGE_SAMPLE_SIZE(formatb); + int alpha_added, alpha_removed; + int bchannels; + int btoa[4]; + png_uint_32 y; + Transform tr; + + /* This should never happen: */ + if (width != b->image.width || height != b->image.height) + return logerror(a, a->file_name, ": width x height changed: ", + b->file_name); + + /* Set up the background and the transform */ + transform_from_formats(&tr, a, b, background, via_linear); + + /* Find the first row and inter-row space. */ + if (!(formata & PNG_FORMAT_FLAG_COLORMAP) && + (formata & PNG_FORMAT_FLAG_LINEAR)) + stridea *= 2; + + if (!(formatb & PNG_FORMAT_FLAG_COLORMAP) && + (formatb & PNG_FORMAT_FLAG_LINEAR)) + strideb *= 2; + + if (stridea < 0) rowa += (height-1) * (-stridea); + if (strideb < 0) rowb += (height-1) * (-strideb); + + /* First shortcut the two colormap case by comparing the image data; if it + * matches then we expect the colormaps to match, although this is not + * absolutely necessary for an image match. If the colormaps fail to match + * then there is a problem in libpng. + */ + if (formata & formatb & PNG_FORMAT_FLAG_COLORMAP) + { + /* Only check colormap entries that actually exist; */ + png_const_bytep ppa, ppb; + int match; + png_byte in_use[256], amax = 0, bmax = 0; + + memset(in_use, 0, sizeof in_use); + + ppa = rowa; + ppb = rowb; + + /* Do this the slow way to accumulate the 'in_use' flags, don't break out + * of the loop until the end; this validates the color-mapped data to + * ensure all pixels are valid color-map indexes. + */ + for (y=0, match=1; y bmax) + bmax = bval; + + if (bval != aval) + match = 0; + + in_use[aval] = 1; + if (aval > amax) + amax = aval; + } + } + + /* If the buffers match then the colormaps must too. */ + if (match) + { + /* Do the color-maps match, entry by entry? Only check the 'in_use' + * entries. An error here should be logged as a color-map error. + */ + png_const_bytep a_cmap = (png_const_bytep)a->colormap; + png_const_bytep b_cmap = (png_const_bytep)b->colormap; + int result = 1; /* match by default */ + + /* This is used in logpixel to get the error message correct. */ + tr.is_palette = 1; + + for (y=0; y<256; ++y, a_cmap += a_sample, b_cmap += b_sample) + if (in_use[y]) + { + /* The colormap entries should be valid, but because libpng doesn't + * do any checking at present the original image may contain invalid + * pixel values. These cause an error here (at present) unless + * accumulating errors in which case the program just ignores them. + */ + if (y >= a->image.colormap_entries) + { + if ((a->opts & ACCUMULATE) == 0) + { + char pindex[9]; + sprintf(pindex, "%lu[%lu]", (unsigned long)y, + (unsigned long)a->image.colormap_entries); + logerror(a, a->file_name, ": bad pixel index: ", pindex); + } + result = 0; + } + + else if (y >= b->image.colormap_entries) + { + if ((a->opts & ACCUMULATE) == 0) + { + char pindex[9]; + sprintf(pindex, "%lu[%lu]", (unsigned long)y, + (unsigned long)b->image.colormap_entries); + logerror(b, b->file_name, ": bad pixel index: ", pindex); + } + result = 0; + } + + /* All the mismatches are logged here; there can only be 256! */ + else if (!cmppixel(&tr, a_cmap, b_cmap, 0, y)) + result = 0; + } + + /* If reqested copy the error values back from the Transform. */ + if (a->opts & ACCUMULATE) + { + tr.error_ptr[0] = tr.error[0]; + tr.error_ptr[1] = tr.error[1]; + tr.error_ptr[2] = tr.error[2]; + tr.error_ptr[3] = tr.error[3]; + result = 1; /* force a continue */ + } + + return result; + } + + /* else the image buffers don't match pixel-wise so compare sample values + * instead, but first validate that the pixel indexes are in range (but + * only if not accumulating, when the error is ignored.) + */ + else if ((a->opts & ACCUMULATE) == 0) + { + /* Check the original image first, + * TODO: deal with input images with bad pixel values? + */ + if (amax >= a->image.colormap_entries) + { + char pindex[9]; + sprintf(pindex, "%d[%lu]", amax, + (unsigned long)a->image.colormap_entries); + return logerror(a, a->file_name, ": bad pixel index: ", pindex); + } + + else if (bmax >= b->image.colormap_entries) + { + char pindex[9]; + sprintf(pindex, "%d[%lu]", bmax, + (unsigned long)b->image.colormap_entries); + return logerror(b, b->file_name, ": bad pixel index: ", pindex); + } + } + } + + /* We can directly compare pixel values without the need to use the read + * or transform support (i.e. a memory compare) if: + * + * 1) The bit depth has not changed. + * 2) RGB to grayscale has not been done (the reverse is ok; we just compare + * the three RGB values to the original grayscale.) + * 3) An alpha channel has not been removed from an 8-bit format, or the + * 8-bit alpha value of the pixel was 255 (opaque). + * + * If an alpha channel has been *added* then it must have the relevant opaque + * value (255 or 65535). + * + * The fist two the tests (in the order given above) (using the boolean + * equivalence !a && !b == !(a || b)) + */ + if (!(((formata ^ formatb) & PNG_FORMAT_FLAG_LINEAR) | + (formata & (formatb ^ PNG_FORMAT_FLAG_COLOR) & PNG_FORMAT_FLAG_COLOR))) + { + /* Was an alpha channel changed? */ + const png_uint_32 alpha_changed = (formata ^ formatb) & + PNG_FORMAT_FLAG_ALPHA; + + /* Was an alpha channel removed? (The third test.) If so the direct + * comparison is only possible if the input alpha is opaque. + */ + alpha_removed = (formata & alpha_changed) != 0; + + /* Was an alpha channel added? */ + alpha_added = (formatb & alpha_changed) != 0; + + /* The channels may have been moved between input and output, this finds + * out how, recording the result in the btoa array, which says where in + * 'a' to find each channel of 'b'. If alpha was added then btoa[alpha] + * ends up as 4 (and is not used.) + */ + { + int i; + png_byte aloc[4]; + png_byte bloc[4]; + + /* The following are used only if the formats match, except that + * 'bchannels' is a flag for matching formats. btoa[x] says, for each + * channel in b, where to find the corresponding value in a, for the + * bchannels. achannels may be different for a gray to rgb transform + * (a will be 1 or 2, b will be 3 or 4 channels.) + */ + (void)component_loc(aloc, formata); + bchannels = component_loc(bloc, formatb); + + /* Hence the btoa array. */ + for (i=0; i<4; ++i) if (bloc[i] < 4) + btoa[bloc[i]] = aloc[i]; /* may be '4' for alpha */ + + if (alpha_added) + alpha_added = bloc[0]; /* location of alpha channel in image b */ + + else + alpha_added = 4; /* Won't match an image b channel */ + + if (alpha_removed) + alpha_removed = aloc[0]; /* location of alpha channel in image a */ + + else + alpha_removed = 4; + } + } + + else + { + /* Direct compare is not possible, cancel out all the corresponding local + * variables. + */ + bchannels = 0; + alpha_removed = alpha_added = 4; + btoa[3] = btoa[2] = btoa[1] = btoa[0] = 4; /* 4 == not present */ + } + + for (y=0; ycolormap + a_sample * *ppa++; + else + psa = ppa, ppa += a_sample; + + if (formatb & PNG_FORMAT_FLAG_COLORMAP) + psb = (png_const_bytep)b->colormap + b_sample * *ppb++; + else + psb = ppb, ppb += b_sample; + + /* Do the fast test if possible. */ + if (bchannels) + { + /* Check each 'b' channel against either the corresponding 'a' + * channel or the opaque alpha value, as appropriate. If + * alpha_removed value is set (not 4) then also do this only if the + * 'a' alpha channel (alpha_removed) is opaque; only relevant for + * the 8-bit case. + */ + if (formatb & PNG_FORMAT_FLAG_LINEAR) /* 16-bit checks */ + { + png_const_uint_16p pua = aligncastconst(png_const_uint_16p, psa); + png_const_uint_16p pub = aligncastconst(png_const_uint_16p, psb); + + switch (bchannels) + { + case 4: + if (pua[btoa[3]] != pub[3]) break; + case 3: + if (pua[btoa[2]] != pub[2]) break; + case 2: + if (pua[btoa[1]] != pub[1]) break; + case 1: + if (pua[btoa[0]] != pub[0]) break; + if (alpha_added != 4 && pub[alpha_added] != 65535) break; + continue; /* x loop */ + default: + break; /* impossible */ + } + } + + else if (alpha_removed == 4 || psa[alpha_removed] == 255) + { + switch (bchannels) + { + case 4: + if (psa[btoa[3]] != psb[3]) break; + case 3: + if (psa[btoa[2]] != psb[2]) break; + case 2: + if (psa[btoa[1]] != psb[1]) break; + case 1: + if (psa[btoa[0]] != psb[0]) break; + if (alpha_added != 4 && psb[alpha_added] != 255) break; + continue; /* x loop */ + default: + break; /* impossible */ + } + } + } + + /* If we get to here the fast match failed; do the slow match for this + * pixel. + */ + if (!cmppixel(&tr, psa, psb, x, y) && (a->opts & KEEP_GOING) == 0) + return 0; /* error case */ + } + } + + /* If reqested copy the error values back from the Transform. */ + if (a->opts & ACCUMULATE) + { + tr.error_ptr[0] = tr.error[0]; + tr.error_ptr[1] = tr.error[1]; + tr.error_ptr[2] = tr.error[2]; + tr.error_ptr[3] = tr.error[3]; + } + + return 1; +} + +/* Read the file; how the read gets done depends on which of input_file and + * input_memory have been set. + */ +static int +read_file(Image *image, png_uint_32 format, png_const_colorp background) +{ + memset(&image->image, 0, sizeof image->image); + image->image.version = PNG_IMAGE_VERSION; + + if (image->input_memory != NULL) + { + if (!png_image_begin_read_from_memory(&image->image, image->input_memory, + image->input_memory_size)) + return logerror(image, "memory init: ", image->file_name, ""); + } + + else if (image->input_file != NULL) + { + if (!png_image_begin_read_from_stdio(&image->image, image->input_file)) + return logerror(image, "stdio init: ", image->file_name, ""); + } + + else + { + if (!png_image_begin_read_from_file(&image->image, image->file_name)) + return logerror(image, "file init: ", image->file_name, ""); + } + + /* This must be set after the begin_read call: */ + if (image->opts & sRGB_16BIT) + image->image.flags |= PNG_IMAGE_FLAG_16BIT_sRGB; + + /* Have an initialized image with all the data we need plus, maybe, an + * allocated file (myfile) or buffer (mybuffer) that need to be freed. + */ + { + int result; + png_uint_32 image_format; + + /* Print both original and output formats. */ + image_format = image->image.format; + + if (image->opts & VERBOSE) + { + printf("%s %lu x %lu %s -> %s", image->file_name, + (unsigned long)image->image.width, + (unsigned long)image->image.height, + format_names[image_format & FORMAT_MASK], + (format & FORMAT_NO_CHANGE) != 0 || image->image.format == format + ? "no change" : format_names[format & FORMAT_MASK]); + + if (background != NULL) + printf(" background(%d,%d,%d)\n", background->red, + background->green, background->blue); + else + printf("\n"); + + fflush(stdout); + } + + /* 'NO_CHANGE' combined with the color-map flag forces the base format + * flags to be set on read to ensure that the original representation is + * not lost in the pass through a colormap format. + */ + if ((format & FORMAT_NO_CHANGE) != 0) + { + if ((format & PNG_FORMAT_FLAG_COLORMAP) != 0 && + (image_format & PNG_FORMAT_FLAG_COLORMAP) != 0) + format = (image_format & ~BASE_FORMATS) | (format & BASE_FORMATS); + + else + format = image_format; + } + + image->image.format = format; + + image->stride = PNG_IMAGE_ROW_STRIDE(image->image) + image->stride_extra; + allocbuffer(image); + + result = png_image_finish_read(&image->image, background, + image->buffer+16, (png_int_32)image->stride, image->colormap); + + checkbuffer(image, image->file_name); + + if (result) + return checkopaque(image); + + else + return logerror(image, image->file_name, ": image read failed", ""); + } +} + +/* Reads from a filename, which must be in image->file_name, but uses + * image->opts to choose the method. The file is always read in its native + * format (the one the simplified API suggests). + */ +static int +read_one_file(Image *image) +{ + if (!(image->opts & READ_FILE) || (image->opts & USE_STDIO)) + { + /* memory or stdio. */ + FILE *f = fopen(image->file_name, "rb"); + + if (f != NULL) + { + if (image->opts & READ_FILE) + image->input_file = f; + + else /* memory */ + { + if (fseek(f, 0, SEEK_END) == 0) + { + long int cb = ftell(f); + + if (cb > 0 && (unsigned long int)cb < (size_t)~(size_t)0) + { + png_bytep b = voidcast(png_bytep, malloc((size_t)cb)); + + if (b != NULL) + { + rewind(f); + + if (fread(b, (size_t)cb, 1, f) == 1) + { + fclose(f); + image->input_memory_size = cb; + image->input_memory = b; + } + + else + { + free(b); + return logclose(image, f, image->file_name, + ": read failed: "); + } + } + + else + return logclose(image, f, image->file_name, + ": out of memory: "); + } + + else if (cb == 0) + return logclose(image, f, image->file_name, + ": zero length: "); + + else + return logclose(image, f, image->file_name, + ": tell failed: "); + } + + else + return logclose(image, f, image->file_name, ": seek failed: "); + } + } + + else + return logerror(image, image->file_name, ": open failed: ", + strerror(errno)); + } + + return read_file(image, FORMAT_NO_CHANGE, NULL); +} + +#ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED +static int +write_one_file(Image *output, Image *image, int convert_to_8bit) +{ + if (image->opts & FAST_WRITE) + image->image.flags |= PNG_IMAGE_FLAG_FAST; + + if (image->opts & USE_STDIO) + { + FILE *f = tmpfile(); + + if (f != NULL) + { + if (png_image_write_to_stdio(&image->image, f, convert_to_8bit, + image->buffer+16, (png_int_32)image->stride, image->colormap)) + { + if (fflush(f) == 0) + { + rewind(f); + initimage(output, image->opts, "tmpfile", image->stride_extra); + output->input_file = f; + if (!checkopaque(image)) + return 0; + } + + else + return logclose(image, f, "tmpfile", ": flush: "); + } + + else + { + fclose(f); + return logerror(image, "tmpfile", ": write failed", ""); + } + } + + else + return logerror(image, "tmpfile", ": open: ", strerror(errno)); + } + + else + { + static int counter = 0; + char name[32]; + + sprintf(name, "%s%d.png", tmpf, ++counter); + + if (png_image_write_to_file(&image->image, name, convert_to_8bit, + image->buffer+16, (png_int_32)image->stride, image->colormap)) + { + initimage(output, image->opts, output->tmpfile_name, + image->stride_extra); + /* Afterwards, or freeimage will delete it! */ + strcpy(output->tmpfile_name, name); + + if (!checkopaque(image)) + return 0; + } + + else + return logerror(image, name, ": write failed", ""); + } + + /* 'output' has an initialized temporary image, read this back in and compare + * this against the original: there should be no change since the original + * format was written unmodified unless 'convert_to_8bit' was specified. + * However, if the original image was color-mapped, a simple read will zap + * the linear, color and maybe alpha flags, this will cause spurious failures + * under some circumstances. + */ + if (read_file(output, image->image.format | FORMAT_NO_CHANGE, NULL)) + { + png_uint_32 original_format = image->image.format; + + if (convert_to_8bit) + original_format &= ~PNG_FORMAT_FLAG_LINEAR; + + if ((output->image.format & BASE_FORMATS) != + (original_format & BASE_FORMATS)) + return logerror(image, image->file_name, ": format changed on read: ", + output->file_name); + + return compare_two_images(image, output, 0/*via linear*/, NULL); + } + + else + return logerror(output, output->tmpfile_name, + ": read of new file failed", ""); +} +#endif + +static int +testimage(Image *image, png_uint_32 opts, format_list *pf) +{ + int result; + Image copy; + + /* Copy the original data, stealing it from 'image' */ + checkopaque(image); + copy = *image; + + copy.opts = opts; + copy.buffer = NULL; + copy.bufsize = 0; + copy.allocsize = 0; + + image->input_file = NULL; + image->input_memory = NULL; + image->input_memory_size = 0; + image->tmpfile_name[0] = 0; + + { + png_uint_32 counter; + Image output; + + newimage(&output); + + result = 1; + + /* Use the low bit of 'counter' to indicate whether or not to do alpha + * removal with a background color or by composting onto the image; this + * step gets skipped if it isn't relevant + */ + for (counter=0; counter<2*FORMAT_COUNT; ++counter) + if (format_isset(pf, counter >> 1)) + { + png_uint_32 format = counter >> 1; + + png_color background_color; + png_colorp background = NULL; + + /* If there is a format change that removes the alpha channel then + * the background is relevant. If the output is 8-bit color-mapped + * then a background color *must* be provided, otherwise there are + * two tests to do - one with a color, the other with NULL. The + * NULL test happens second. + */ + if ((counter & 1) == 0) + { + if ((format & PNG_FORMAT_FLAG_ALPHA) == 0 && + (image->image.format & PNG_FORMAT_FLAG_ALPHA) != 0) + { + /* Alpha/transparency will be removed, the background is + * relevant: make it a color the first time + */ + random_color(&background_color); + background = &background_color; + + /* BUT if the output is to a color-mapped 8-bit format then + * the background must always be a color, so increment 'counter' + * to skip the NULL test. + */ + if ((format & PNG_FORMAT_FLAG_COLORMAP) != 0 && + (format & PNG_FORMAT_FLAG_LINEAR) == 0) + ++counter; + } + + /* Otherwise an alpha channel is not being eliminated, just leave + * background NULL and skip the (counter & 1) NULL test. + */ + else + ++counter; + } + /* else just use NULL for background */ + + resetimage(©); + copy.opts = opts; /* in case read_file needs to change it */ + + result = read_file(©, format, background); + if (!result) + break; + + /* Make sure the file just read matches the original file. */ + result = compare_two_images(image, ©, 0/*via linear*/, background); + if (!result) + break; + +# ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED + /* Write the *copy* just made to a new file to make sure the write + * side works ok. Check the conversion to sRGB if the copy is + * linear. + */ + output.opts = opts; + result = write_one_file(&output, ©, 0/*convert to 8bit*/); + if (!result) + break; + + /* Validate against the original too; the background is needed here + * as well so that compare_two_images knows what color was used. + */ + result = compare_two_images(image, &output, 0, background); + if (!result) + break; + + if ((format & PNG_FORMAT_FLAG_LINEAR) != 0 && + (format & PNG_FORMAT_FLAG_COLORMAP) == 0) + { + /* 'output' is linear, convert to the corresponding sRGB format. + */ + output.opts = opts; + result = write_one_file(&output, ©, 1/*convert to 8bit*/); + if (!result) + break; + + /* This may involve a conversion via linear; in the ideal world + * this would round-trip correctly, but libpng 1.5.7 is not the + * ideal world so allow a drift (error_via_linear). + * + * 'image' has an alpha channel but 'output' does not then there + * will a strip-alpha-channel operation (because 'output' is + * linear), handle this by composing on black when doing the + * comparison. + */ + result = compare_two_images(image, &output, 1/*via_linear*/, + background); + if (!result) + break; + } +# endif /* PNG_SIMPLIFIED_WRITE_SUPPORTED */ + } + + freeimage(&output); + } + + freeimage(©); + + return result; +} + +static int +test_one_file(const char *file_name, format_list *formats, png_uint_32 opts, + int stride_extra, int log_pass) +{ + int result; + Image image; + + newimage(&image); + initimage(&image, opts, file_name, stride_extra); + result = read_one_file(&image); + if (result) + result = testimage(&image, opts, formats); + freeimage(&image); + + /* Ensure that stderr is flushed into any log file */ + fflush(stderr); + + if (log_pass) + { + if (result) + printf("PASS:"); + + else + printf("FAIL:"); + +# ifndef PNG_SIMPLIFIED_WRITE_SUPPORTED + printf(" (no write)"); +# endif + + print_opts(opts); + printf(" %s\n", file_name); + /* stdout may not be line-buffered if it is piped to a file, so: */ + fflush(stdout); + } + + else if (!result) + exit(1); + + return result; +} + +int +main(int argc, char **argv) +{ + png_uint_32 opts = FAST_WRITE; + format_list formats; + const char *touch = NULL; + int log_pass = 0; + int redundant = 0; + int stride_extra = 0; + int retval = 0; + int c; + + init_sRGB_to_d(); +#if 0 + init_error_via_linear(); +#endif + format_init(&formats); + + for (c=1; c= sizeof tmpf) + { + fflush(stdout); + fprintf(stderr, "%s: %s is too long for a temp file prefix\n", + argv[0], argv[c]); + exit(99); + } + + /* Safe: checked above */ + strcpy(tmpf, argv[c]); + } + + else + { + fflush(stdout); + fprintf(stderr, "%s: %s requires a temporary file prefix\n", + argv[0], arg); + exit(99); + } + } + else if (strcmp(arg, "--touch") == 0) + { + if (c+1 < argc) + touch = argv[++c]; + + else + { + fflush(stdout); + fprintf(stderr, "%s: %s requires a file name argument\n", + argv[0], arg); + exit(99); + } + } + else if (arg[0] == '+') + { + png_uint_32 format = formatof(arg+1); + + if (format > FORMAT_COUNT) + exit(99); + + format_set(&formats, format); + } + else if (arg[0] == '-' && arg[1] != 0 && (arg[1] != '0' || arg[2] != 0)) + { + fflush(stdout); + fprintf(stderr, "%s: unknown option: %s\n", argv[0], arg); + exit(99); + } + else + { + if (format_is_initial(&formats)) + format_default(&formats, redundant); + + if (arg[0] == '-') + { + const int term = (arg[1] == '0' ? 0 : '\n'); + unsigned int ich = 0; + + /* Loop reading files, use a static buffer to simplify this and just + * stop if the name gets to long. + */ + static char buffer[4096]; + + do + { + int ch = getchar(); + + /* Don't allow '\0' in file names, and terminate with '\n' or, + * for -0, just '\0' (use -print0 to find to make this work!) + */ + if (ch == EOF || ch == term || ch == 0) + { + buffer[ich] = 0; + + if (ich > 0 && !test_one_file(buffer, &formats, opts, + stride_extra, log_pass)) + retval = 1; + + if (ch == EOF) + break; + + ich = 0; + --ich; /* so that the increment below sets it to 0 again */ + } + + else + buffer[ich] = (char)ch; + } while (++ich < sizeof buffer); + + if (ich) + { + buffer[32] = 0; + buffer[4095] = 0; + fprintf(stderr, "%s...%s: file name too long\n", buffer, + buffer+(4096-32)); + exit(99); + } + } + + else if (!test_one_file(arg, &formats, opts, stride_extra, log_pass)) + retval = 1; + } + } + + if (opts & ACCUMULATE) + { + unsigned int in; + + printf("static png_uint_16 gpc_error[16/*in*/][16/*out*/][4/*a*/] =\n"); + printf("{\n"); + for (in=0; in<16; ++in) + { + unsigned int out; + printf(" { /* input: %s */\n ", format_names[in]); + for (out=0; out<16; ++out) + { + unsigned int alpha; + printf(" {"); + for (alpha=0; alpha<4; ++alpha) + { + printf(" %d", gpc_error[in][out][alpha]); + if (alpha < 3) putchar(','); + } + printf(" }"); + if (out < 15) + { + putchar(','); + if (out % 4 == 3) printf("\n "); + } + } + printf("\n }"); + + if (in < 15) + putchar(','); + else + putchar('\n'); + } + printf("};\n"); + + printf("static png_uint_16 gpc_error_via_linear[16][4/*out*/][4] =\n"); + printf("{\n"); + for (in=0; in<16; ++in) + { + unsigned int out; + printf(" { /* input: %s */\n ", format_names[in]); + for (out=0; out<4; ++out) + { + unsigned int alpha; + printf(" {"); + for (alpha=0; alpha<4; ++alpha) + { + printf(" %d", gpc_error_via_linear[in][out][alpha]); + if (alpha < 3) putchar(','); + } + printf(" }"); + if (out < 3) + putchar(','); + } + printf("\n }"); + + if (in < 15) + putchar(','); + else + putchar('\n'); + } + printf("};\n"); + + printf("static png_uint_16 gpc_error_to_colormap[8/*i*/][8/*o*/][4] =\n"); + printf("{\n"); + for (in=0; in<8; ++in) + { + unsigned int out; + printf(" { /* input: %s */\n ", format_names[in]); + for (out=0; out<8; ++out) + { + unsigned int alpha; + printf(" {"); + for (alpha=0; alpha<4; ++alpha) + { + printf(" %d", gpc_error_to_colormap[in][out][alpha]); + if (alpha < 3) putchar(','); + } + printf(" }"); + if (out < 7) + { + putchar(','); + if (out % 4 == 3) printf("\n "); + } + } + printf("\n }"); + + if (in < 7) + putchar(','); + else + putchar('\n'); + } + printf("};\n"); + } + + if (retval == 0 && touch != NULL) + { + FILE *fsuccess = fopen(touch, "wt"); + + if (fsuccess != NULL) + { + int error = 0; + fprintf(fsuccess, "PNG simple API tests succeeded\n"); + fflush(fsuccess); + error = ferror(fsuccess); + + if (fclose(fsuccess) || error) + { + fflush(stdout); + fprintf(stderr, "%s: write failed\n", touch); + exit(99); + } + } + + else + { + fflush(stdout); + fprintf(stderr, "%s: open failed\n", touch); + exit(99); + } + } + + return retval; +} + +#else /* !PNG_SIMPLIFIED_READ_SUPPORTED */ +int main(void) +{ + fprintf(stderr, "pngstest: no read support in libpng, test skipped\n"); + /* So the test is skipped: */ + return 77; +} +#endif /* PNG_SIMPLIFIED_READ_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/contrib/libtests/pngunknown.c b/src/SDL2/external/libpng-1.6.2/contrib/libtests/pngunknown.c new file mode 100644 index 000000000..25452dbc9 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/libtests/pngunknown.c @@ -0,0 +1,1066 @@ + +/* pngunknown.c - test the read side unknown chunk handling + * + * Last changed in libpng 1.6.0 [February 14, 2013] + * Copyright (c) 2013 Glenn Randers-Pehrson + * Written by John Cunningham Bowler + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * NOTES: + * This is a C program that is intended to be linked against libpng. It + * allows the libpng unknown handling code to be tested by interpreting + * arguments to save or discard combinations of chunks. The program is + * currently just a minimal validation for the built-in libpng facilities. + */ + +#include +#include +#include +#include + +/* Define the following to use this test against your installed libpng, rather + * than the one being built here: + */ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../../png.h" +#endif + +#ifdef PNG_READ_SUPPORTED + +#if PNG_LIBPNG_VER < 10500 +/* This deliberately lacks the PNG_CONST. */ +typedef png_byte *png_const_bytep; + +/* This is copied from 1.5.1 png.h: */ +#define PNG_INTERLACE_ADAM7_PASSES 7 +#define PNG_PASS_START_ROW(pass) (((1U&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1U& (pass))<<(3-(((pass)+1)>>1)))&7) +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) +#define PNG_ROW_FROM_PASS_ROW(yIn, pass) \ + (((yIn)<>(((7-(off))-(pass))<<2)) & 0xFU) | \ + ((0x01145AF0U>>(((7-(off))-(pass))<<2)) & 0xF0U)) +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +/* These are needed too for the default build: */ +#define PNG_WRITE_16BIT_SUPPORTED +#define PNG_READ_16BIT_SUPPORTED + +/* This comes from pnglibconf.h afer 1.5: */ +#define PNG_FP_1 100000 +#define PNG_GAMMA_THRESHOLD_FIXED\ + ((png_fixed_point)(PNG_GAMMA_THRESHOLD * PNG_FP_1)) +#endif + +#if PNG_LIBPNG_VER < 10600 + /* 1.6.0 constifies many APIs. The following exists to allow pngvalid to be + * compiled against earlier versions. + */ +# define png_const_structp png_structp +#endif + + +/* Copied from pngpriv.h */ +#define PNG_32b(b,s) ((png_uint_32)(b) << (s)) +#define PNG_CHUNK(b1,b2,b3,b4) \ + (PNG_32b(b1,24) | PNG_32b(b2,16) | PNG_32b(b3,8) | PNG_32b(b4,0)) + +#define png_IHDR PNG_CHUNK( 73, 72, 68, 82) +#define png_IDAT PNG_CHUNK( 73, 68, 65, 84) +#define png_IEND PNG_CHUNK( 73, 69, 78, 68) +#define png_PLTE PNG_CHUNK( 80, 76, 84, 69) +#define png_bKGD PNG_CHUNK( 98, 75, 71, 68) +#define png_cHRM PNG_CHUNK( 99, 72, 82, 77) +#define png_gAMA PNG_CHUNK(103, 65, 77, 65) +#define png_hIST PNG_CHUNK(104, 73, 83, 84) +#define png_iCCP PNG_CHUNK(105, 67, 67, 80) +#define png_iTXt PNG_CHUNK(105, 84, 88, 116) +#define png_oFFs PNG_CHUNK(111, 70, 70, 115) +#define png_pCAL PNG_CHUNK(112, 67, 65, 76) +#define png_sCAL PNG_CHUNK(115, 67, 65, 76) +#define png_pHYs PNG_CHUNK(112, 72, 89, 115) +#define png_sBIT PNG_CHUNK(115, 66, 73, 84) +#define png_sPLT PNG_CHUNK(115, 80, 76, 84) +#define png_sRGB PNG_CHUNK(115, 82, 71, 66) +#define png_sTER PNG_CHUNK(115, 84, 69, 82) +#define png_tEXt PNG_CHUNK(116, 69, 88, 116) +#define png_tIME PNG_CHUNK(116, 73, 77, 69) +#define png_tRNS PNG_CHUNK(116, 82, 78, 83) +#define png_zTXt PNG_CHUNK(122, 84, 88, 116) +#define png_vpAg PNG_CHUNK('v', 'p', 'A', 'g') + +/* Test on flag values as defined in the spec (section 5.4): */ +#define PNG_CHUNK_ANCILLARY(c ) (1 & ((c) >> 29)) +#define PNG_CHUNK_CRITICAL(c) (!PNG_CHUNK_ANCILLARY(c)) +#define PNG_CHUNK_PRIVATE(c) (1 & ((c) >> 21)) +#define PNG_CHUNK_RESERVED(c) (1 & ((c) >> 13)) +#define PNG_CHUNK_SAFE_TO_COPY(c) (1 & ((c) >> 5)) + +/* Chunk information */ +#define PNG_INFO_tEXt 0x10000000U +#define PNG_INFO_iTXt 0x20000000U +#define PNG_INFO_zTXt 0x40000000U + +#define PNG_INFO_sTER 0x01000000U +#define PNG_INFO_vpAg 0x02000000U + +#define ABSENT 0 +#define START 1 +#define END 2 + +static struct +{ + char name[5]; + png_uint_32 flag; + png_uint_32 tag; + int unknown; /* Chunk not known to libpng */ + int all; /* Chunk set by the '-1' option */ + int position; /* position in pngtest.png */ + int keep; /* unknown handling setting */ +} chunk_info[] = { + /* Critical chunks */ + { "IDAT", PNG_INFO_IDAT, png_IDAT, 0, 0, START, 0 }, /* must be [0] */ + { "PLTE", PNG_INFO_PLTE, png_PLTE, 0, 0, ABSENT, 0 }, + + /* Non-critical chunks that libpng handles */ + /* This is a mess but it seems to be the only way to do it - there is no way to + * check for definition outside a #if. + */ + { "bKGD", PNG_INFO_bKGD, png_bKGD, +# ifdef PNG_READ_bKGD_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "cHRM", PNG_INFO_cHRM, png_cHRM, +# ifdef PNG_READ_cHRM_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "gAMA", PNG_INFO_gAMA, png_gAMA, +# ifdef PNG_READ_gAMA_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "hIST", PNG_INFO_hIST, png_hIST, +# ifdef PNG_READ_hIST_SUPPORTED + 0, +# else + 1, +# endif + 1, ABSENT, 0 }, + { "iCCP", PNG_INFO_iCCP, png_iCCP, +# ifdef PNG_READ_iCCP_SUPPORTED + 0, +# else + 1, +# endif + 1, ABSENT, 0 }, + { "iTXt", PNG_INFO_iTXt, png_iTXt, +# ifdef PNG_READ_iTXt_SUPPORTED + 0, +# else + 1, +# endif + 1, ABSENT, 0 }, + { "oFFs", PNG_INFO_oFFs, png_oFFs, +# ifdef PNG_READ_oFFs_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "pCAL", PNG_INFO_pCAL, png_pCAL, +# ifdef PNG_READ_pCAL_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "pHYs", PNG_INFO_pHYs, png_pHYs, +# ifdef PNG_READ_pHYs_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "sBIT", PNG_INFO_sBIT, png_sBIT, +# ifdef PNG_READ_sBIT_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "sCAL", PNG_INFO_sCAL, png_sCAL, +# ifdef PNG_READ_sCAL_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "sPLT", PNG_INFO_sPLT, png_sPLT, +# ifdef PNG_READ_sPLT_SUPPORTED + 0, +# else + 1, +# endif + 1, ABSENT, 0 }, + { "sRGB", PNG_INFO_sRGB, png_sRGB, +# ifdef PNG_READ_sRGB_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "tEXt", PNG_INFO_tEXt, png_tEXt, +# ifdef PNG_READ_tEXt_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "tIME", PNG_INFO_tIME, png_tIME, +# ifdef PNG_READ_tIME_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "tRNS", PNG_INFO_tRNS, png_tRNS, +# ifdef PNG_READ_tRNS_SUPPORTED + 0, +# else + 1, +# endif + 0, ABSENT, 0 }, + { "zTXt", PNG_INFO_zTXt, png_zTXt, +# ifdef PNG_READ_zTXt_SUPPORTED + 0, +# else + 1, +# endif + 1, END, 0 }, + + /* No libpng handling */ + { "sTER", PNG_INFO_sTER, png_sTER, 1, 1, START, 0 }, + { "vpAg", PNG_INFO_vpAg, png_vpAg, 1, 0, START, 0 }, +}; + +#define NINFO ((int)((sizeof chunk_info)/(sizeof chunk_info[0]))) + +static void +clear_keep(void) +{ + int i = NINFO; + while (--i >= 0) + chunk_info[i].keep = 0; +} + +static int +find(const char *name) +{ + int i = NINFO; + while (--i >= 0) + { + if (memcmp(chunk_info[i].name, name, 4) == 0) + break; + } + + return i; +} + +static int +findb(const png_byte *name) +{ + int i = NINFO; + while (--i >= 0) + { + if (memcmp(chunk_info[i].name, name, 4) == 0) + break; + } + + return i; +} + +static int +find_by_flag(png_uint_32 flag) +{ + int i = NINFO; + + while (--i >= 0) if (chunk_info[i].flag == flag) return i; + + fprintf(stderr, "pngunknown: internal error\n"); + exit(4); +} + +static int +ancillary(const char *name) +{ + return PNG_CHUNK_ANCILLARY(PNG_CHUNK(name[0], name[1], name[2], name[3])); +} + +static int +ancillaryb(const png_byte *name) +{ + return PNG_CHUNK_ANCILLARY(PNG_CHUNK(name[0], name[1], name[2], name[3])); +} + +/* Type of an error_ptr */ +typedef struct +{ + jmp_buf error_return; + png_structp png_ptr; + png_infop info_ptr, end_ptr; + int error_count; + int warning_count; + const char *program; + const char *file; + const char *test; +} display; + +static const char init[] = "initialization"; +static const char cmd[] = "command line"; + +static void +init_display(display *d, const char *program) +{ + memset(d, 0, sizeof *d); + d->png_ptr = NULL; + d->info_ptr = d->end_ptr = NULL; + d->error_count = d->warning_count = 0; + d->program = program; + d->file = program; + d->test = init; +} + +static void +clean_display(display *d) +{ + png_destroy_read_struct(&d->png_ptr, &d->info_ptr, &d->end_ptr); + + /* This must not happen - it might cause an app crash */ + if (d->png_ptr != NULL || d->info_ptr != NULL || d->end_ptr != NULL) + { + fprintf(stderr, "%s(%s): png_destroy_read_struct error\n", d->file, + d->test); + exit(1); + } + + /* Invalidate the test */ + d->test = init; +} + +PNG_FUNCTION(void, display_exit, (display *d), static PNG_NORETURN) +{ + ++(d->error_count); + + if (d->png_ptr != NULL) + clean_display(d); + + /* During initialization and if this is a single command line argument set + * exit now - there is only one test, otherwise longjmp to do the next test. + */ + if (d->test == init || d->test == cmd) + exit(1); + + longjmp(d->error_return, 1); +} + +static int +display_rc(const display *d, int strict) +{ + return d->error_count + (strict ? d->warning_count : 0); +} + +/* libpng error and warning callbacks */ +PNG_FUNCTION(void, error, (png_structp png_ptr, const char *message), + static PNG_NORETURN) +{ + display *d = (display*)png_get_error_ptr(png_ptr); + + fprintf(stderr, "%s(%s): libpng error: %s\n", d->file, d->test, message); + display_exit(d); +} + +static void +warning(png_structp png_ptr, const char *message) +{ + display *d = (display*)png_get_error_ptr(png_ptr); + + fprintf(stderr, "%s(%s): libpng warning: %s\n", d->file, d->test, message); + ++(d->warning_count); +} + +static png_uint_32 +get_valid(display *d, png_infop info_ptr) +{ + png_uint_32 flags = png_get_valid(d->png_ptr, info_ptr, (png_uint_32)~0); + + /* Map the text chunks back into the flags */ + { + png_textp text; + png_uint_32 ntext = png_get_text(d->png_ptr, info_ptr, &text, NULL); + + while (ntext-- > 0) switch (text[ntext].compression) + { + case -1: + flags |= PNG_INFO_tEXt; + break; + case 0: + flags |= PNG_INFO_zTXt; + break; + case 1: + case 2: + flags |= PNG_INFO_iTXt; + break; + default: + fprintf(stderr, "%s(%s): unknown text compression %d\n", d->file, + d->test, text[ntext].compression); + display_exit(d); + } + } + + return flags; +} + +static png_uint_32 +get_unknown(display *d, int def, png_infop info_ptr) +{ + /* Create corresponding 'unknown' flags */ + png_uint_32 flags = 0; + { + png_unknown_chunkp unknown; + int num_unknown = png_get_unknown_chunks(d->png_ptr, info_ptr, &unknown); + + while (--num_unknown >= 0) + { + int chunk = findb(unknown[num_unknown].name); + + /* Chunks not known to pngunknown must be validated here; since they + * must also be unknown to libpng the 'def' behavior should have been + * used. + */ + if (chunk < 0) switch (def) + { + default: /* impossible */ + case PNG_HANDLE_CHUNK_AS_DEFAULT: + case PNG_HANDLE_CHUNK_NEVER: + fprintf(stderr, "%s(%s): %s: %s: unknown chunk saved\n", + d->file, d->test, def ? "discard" : "default", + unknown[num_unknown].name); + ++(d->error_count); + break; + + case PNG_HANDLE_CHUNK_IF_SAFE: + if (!ancillaryb(unknown[num_unknown].name)) + { + fprintf(stderr, + "%s(%s): if-safe: %s: unknown critical chunk saved\n", + d->file, d->test, unknown[num_unknown].name); + ++(d->error_count); + break; + } + /* FALL THROUGH (safe) */ + case PNG_HANDLE_CHUNK_ALWAYS: + break; + } + + else + flags |= chunk_info[chunk].flag; + } + } + + return flags; +} + +static int +check(FILE *fp, int argc, const char **argv, png_uint_32p flags/*out*/, + display *d) +{ + int i, def = PNG_HANDLE_CHUNK_AS_DEFAULT, npasses, ipass; + png_uint_32 height; + + /* Some of these errors are permanently fatal and cause an exit here, others + * are per-test and cause an error return. + */ + d->png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, d, error, + warning); + if (d->png_ptr == NULL) + { + fprintf(stderr, "%s(%s): could not allocate png struct\n", d->file, + d->test); + /* Terminate here, this error is not test specific. */ + exit(1); + } + + d->info_ptr = png_create_info_struct(d->png_ptr); + d->end_ptr = png_create_info_struct(d->png_ptr); + if (d->info_ptr == NULL || d->end_ptr == NULL) + { + fprintf(stderr, "%s(%s): could not allocate png info\n", d->file, + d->test); + clean_display(d); + exit(1); + } + + png_init_io(d->png_ptr, fp); + + /* Handle each argument in turn; multiple settings are possible for the same + * chunk and multiple calls will occur (the last one should override all + * preceding ones). + */ + for (i=0; ipng_ptr, option, name, 1); + chunk_info[chunk].keep = option; +# endif + continue; + } + + break; + + case 7: /* default */ + if (memcmp(argv[i], "default", 7) == 0) + { +# ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED + png_set_keep_unknown_chunks(d->png_ptr, option, NULL, 0); +# endif + def = option; + continue; + } + + break; + + case 3: /* all */ + if (memcmp(argv[i], "all", 3) == 0) + { +# ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED + png_set_keep_unknown_chunks(d->png_ptr, option, NULL, -1); + def = option; + + for (chunk = 0; chunk < NINFO; ++chunk) + if (chunk_info[chunk].all) + chunk_info[chunk].keep = option; +# endif + continue; + } + + break; + + default: /* some misplaced = */ + + break; + } + } + + fprintf(stderr, "%s(%s): %s: unrecognized chunk argument\n", d->file, + d->test, argv[i]); + display_exit(d); + } + + png_read_info(d->png_ptr, d->info_ptr); + + switch (png_get_interlace_type(d->png_ptr, d->info_ptr)) + { + case PNG_INTERLACE_NONE: + npasses = 1; + break; + + case PNG_INTERLACE_ADAM7: + npasses = PNG_INTERLACE_ADAM7_PASSES; + break; + + default: + /* Hard error because it is not test specific */ + fprintf(stderr, "%s(%s): invalid interlace type\n", d->file, d->test); + clean_display(d); + exit(1); + } + + /* Skip the image data, if IDAT is not being handled then don't do this + * because it will cause a CRC error. + */ + if (chunk_info[0/*IDAT*/].keep == PNG_HANDLE_CHUNK_AS_DEFAULT) + { + png_start_read_image(d->png_ptr); + height = png_get_image_height(d->png_ptr, d->info_ptr); + + if (npasses > 1) + { + png_uint_32 width = png_get_image_width(d->png_ptr, d->info_ptr); + + for (ipass=0; ipass 0) + { + png_uint_32 y; + + for (y=0; ypng_ptr, NULL, NULL); + } + } + } /* interlaced */ + + else /* not interlaced */ + { + png_uint_32 y; + + for (y=0; ypng_ptr, NULL, NULL); + } + } + + png_read_end(d->png_ptr, d->end_ptr); + + flags[0] = get_valid(d, d->info_ptr); + flags[1] = get_unknown(d, def, d->info_ptr); + + /* Only png_read_png sets PNG_INFO_IDAT! */ + flags[chunk_info[0/*IDAT*/].keep != PNG_HANDLE_CHUNK_AS_DEFAULT] |= + PNG_INFO_IDAT; + + flags[2] = get_valid(d, d->end_ptr); + flags[3] = get_unknown(d, def, d->end_ptr); + + clean_display(d); + + return def; +} + +static void +check_error(display *d, png_uint_32 flags, const char *message) +{ + while (flags) + { + png_uint_32 flag = flags & -(png_int_32)flags; + int i = find_by_flag(flag); + + fprintf(stderr, "%s(%s): chunk %s: %s\n", d->file, d->test, + chunk_info[i].name, message); + ++(d->error_count); + + flags &= ~flag; + } +} + +static void +check_handling(display *d, int def, png_uint_32 chunks, png_uint_32 known, + png_uint_32 unknown, const char *position) +{ + while (chunks) + { + png_uint_32 flag = chunks & -(png_int_32)chunks; + int i = find_by_flag(flag); + int keep = chunk_info[i].keep; + const char *type; + const char *errorx = NULL; + + if (chunk_info[i].unknown) + { + if (keep == PNG_HANDLE_CHUNK_AS_DEFAULT) + { + type = "UNKNOWN (default)"; + keep = def; + } + + else + type = "UNKNOWN (specified)"; + + if (flag & known) + errorx = "chunk processed"; + + else switch (keep) + { + case PNG_HANDLE_CHUNK_AS_DEFAULT: + if (flag & unknown) + errorx = "DEFAULT: unknown chunk saved"; + break; + + case PNG_HANDLE_CHUNK_NEVER: + if (flag & unknown) + errorx = "DISCARD: unknown chunk saved"; + break; + + case PNG_HANDLE_CHUNK_IF_SAFE: + if (ancillary(chunk_info[i].name)) + { + if (!(flag & unknown)) + errorx = "IF-SAFE: unknown ancillary chunk lost"; + } + + else if (flag & unknown) + errorx = "IF-SAFE: unknown critical chunk saved"; + break; + + case PNG_HANDLE_CHUNK_ALWAYS: + if (!(flag & unknown)) + errorx = "SAVE: unknown chunk lost"; + break; + + default: + errorx = "internal error: bad keep"; + break; + } + } /* unknown chunk */ + + else /* known chunk */ + { + type = "KNOWN"; + + if (flag & known) + { + /* chunk was processed, it won't have been saved because that is + * caught below when checking for inconsistent processing. + */ + if (keep != PNG_HANDLE_CHUNK_AS_DEFAULT) + errorx = "!DEFAULT: known chunk processed"; + } + + else /* not processed */ switch (keep) + { + case PNG_HANDLE_CHUNK_AS_DEFAULT: + errorx = "DEFAULT: known chunk not processed"; + break; + + case PNG_HANDLE_CHUNK_NEVER: + if (flag & unknown) + errorx = "DISCARD: known chunk saved"; + break; + + case PNG_HANDLE_CHUNK_IF_SAFE: + if (ancillary(chunk_info[i].name)) + { + if (!(flag & unknown)) + errorx = "IF-SAFE: known ancillary chunk lost"; + } + + else if (flag & unknown) + errorx = "IF-SAFE: known critical chunk saved"; + break; + + case PNG_HANDLE_CHUNK_ALWAYS: + if (!(flag & unknown)) + errorx = "SAVE: known chunk lost"; + break; + + default: + errorx = "internal error: bad keep (2)"; + break; + } + } + + if (errorx != NULL) + { + ++(d->error_count); + fprintf(stderr, "%s(%s): %s %s %s: %s\n", + d->file, d->test, type, chunk_info[i].name, position, errorx); + } + + chunks &= ~flag; + } +} + +static void +perform_one_test(FILE *fp, int argc, const char **argv, + png_uint_32 *default_flags, display *d) +{ + int def; + png_uint_32 flags[2][4]; + + rewind(fp); + clear_keep(); + memcpy(flags[0], default_flags, sizeof flags[0]); + + def = check(fp, argc, argv, flags[1], d); + + /* Chunks should either be known or unknown, never both and this should apply + * whether the chunk is before or after the IDAT (actually, the app can + * probably change this by swapping the handling after the image, but this + * test does not do that.) + */ + check_error(d, (flags[0][0]|flags[0][2]) & (flags[0][1]|flags[0][3]), + "chunk handled inconsistently in count tests"); + check_error(d, (flags[1][0]|flags[1][2]) & (flags[1][1]|flags[1][3]), + "chunk handled inconsistently in option tests"); + + /* Now find out what happened to each chunk before and after the IDAT and + * determine if the behavior was correct. First some basic sanity checks, + * any known chunk should be known in the original count, any unknown chunk + * should be either known or unknown in the original. + */ + { + png_uint_32 test; + + test = flags[1][0] & ~flags[0][0]; + check_error(d, test, "new known chunk before IDAT"); + test = flags[1][1] & ~(flags[0][0] | flags[0][1]); + check_error(d, test, "new unknown chunk before IDAT"); + test = flags[1][2] & ~flags[0][2]; + check_error(d, test, "new known chunk after IDAT"); + test = flags[1][3] & ~(flags[0][2] | flags[0][3]); + check_error(d, test, "new unknown chunk after IDAT"); + } + + /* Now each chunk in the original list should have been handled according to + * the options set for that chunk, regardless of whether libpng knows about + * it or not. + */ + check_handling(d, def, flags[0][0] | flags[0][1], flags[1][0], flags[1][1], + "before IDAT"); + check_handling(d, def, flags[0][2] | flags[0][3], flags[1][2], flags[1][3], + "after IDAT"); +} + +static void +perform_one_test_safe(FILE *fp, int argc, const char **argv, + png_uint_32 *default_flags, display *d, const char *test) +{ + if (setjmp(d->error_return) == 0) + { + d->test = test; /* allow use of d->error_return */ + perform_one_test(fp, argc, argv, default_flags, d); + d->test = init; /* prevent use of d->error_return */ + } +} + +static const char *standard_tests[] = +{ + "discard", "default=discard", 0, + "save", "default=save", 0, + "if-safe", "default=if-safe", 0, + "vpAg", "vpAg=if-safe", 0, + "sTER", "sTER=if-safe", 0, + "IDAT", "default=discard", "IDAT=save", 0, + "sAPI", "bKGD=save", "cHRM=save", "gAMA=save", "all=discard", "iCCP=save", + "sBIT=save", "sRGB=save", 0, + 0/*end*/ +}; + +static PNG_NORETURN void +usage(const char *program, const char *reason) +{ + fprintf(stderr, "pngunknown: %s: usage:\n %s [--strict] " + "--default|{(CHNK|default|all)=(default|discard|if-safe|save)} " + "testfile.png\n", reason, program); + exit(2); +} + +int +main(int argc, const char **argv) +{ + FILE *fp; + png_uint_32 default_flags[4/*valid,unknown{before,after}*/]; + int strict = 0, default_tests = 0; + const char *count_argv = "default=save"; + const char *touch_file = NULL; + display d; + + init_display(&d, argv[0]); + + while (++argv, --argc > 0) + { + if (strcmp(*argv, "--strict") == 0) + strict = 1; + + else if (strcmp(*argv, "--default") == 0) + default_tests = 1; + + else if (strcmp(*argv, "--touch") == 0) + { + if (argc > 1) + touch_file = *++argv, --argc; + + else + usage(d.program, "--touch: missing file name"); + } + + else + break; + } + + /* A file name is required, but there should be no other arguments if + * --default was specified. + */ + if (argc <= 0) + usage(d.program, "missing test file"); + + /* GCC BUG: if (default_tests && argc != 1) triggers some weird GCC argc + * optimization which causes warnings with -Wstrict-overflow! + */ + else if (default_tests) if (argc != 1) + usage(d.program, "extra arguments"); + +# ifndef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED + fprintf(stderr, "%s: warning: no 'save' support so arguments ignored\n", + d.program); +# endif + + /* The name of the test file is the last argument; remove it. */ + d.file = argv[--argc]; + + fp = fopen(d.file, "rb"); + if (fp == NULL) + { + perror(d.file); + exit(2); + } + + /* First find all the chunks, known and unknown, in the test file, a failure + * here aborts the whole test. + */ + if (check(fp, 1, &count_argv, default_flags, &d) != + PNG_HANDLE_CHUNK_ALWAYS) + { + fprintf(stderr, "%s: %s: internal error\n", d.program, d.file); + exit(3); + } + + /* Now find what the various supplied options cause to change: */ + if (!default_tests) + { + d.test = cmd; /* acts as a flag to say exit, do not longjmp */ + perform_one_test(fp, argc, argv, default_flags, &d); + d.test = init; + } + + else + { + const char **test = standard_tests; + + /* Set the exit_test pointer here so we can continue after a libpng error. + * NOTE: this leaks memory because the png_struct data from the failing + * test is never freed. + */ + while (*test) + { + const char *this_test = *test++; + const char **next = test; + int count = display_rc(&d, strict), new_count; + const char *result; + int arg_count = 0; + + while (*next) ++next, ++arg_count; + + perform_one_test_safe(fp, arg_count, test, default_flags, &d, + this_test); + + new_count = display_rc(&d, strict); + + if (new_count == count) + result = "PASS"; + + else + result = "FAIL"; + + printf("%s: %s %s\n", result, d.program, this_test); + + test = next+1; + } + } + + fclose(fp); + + if (display_rc(&d, strict) == 0) + { + /* Success, touch the success file if appropriate */ + if (touch_file != NULL) + { + FILE *fsuccess = fopen(touch_file, "wt"); + + if (fsuccess != NULL) + { + int err = 0; + fprintf(fsuccess, "PNG unknown tests succeeded\n"); + fflush(fsuccess); + err = ferror(fsuccess); + + if (fclose(fsuccess) || err) + { + fprintf(stderr, "%s: write failed\n", touch_file); + exit(1); + } + } + + else + { + fprintf(stderr, "%s: open failed\n", touch_file); + exit(1); + } + } + + return 0; + } + + return 1; +} + +#else +int +main(void) +{ + fprintf(stderr, + " test ignored because libpng was not built with unknown chunk support\n"); + /* So the test is skipped: */ + return 77; +} +#endif diff --git a/src/SDL2/external/libpng-1.6.2/contrib/libtests/pngvalid.c b/src/SDL2/external/libpng-1.6.2/contrib/libtests/pngvalid.c new file mode 100644 index 000000000..fbd6778cf --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/libtests/pngvalid.c @@ -0,0 +1,10145 @@ + +/* pngvalid.c - validate libpng by constructing then reading png files. + * + * Last changed in libpng 1.6.1 [March 28, 2013] + * Copyright (c) 2013 Glenn Randers-Pehrson + * Written by John Cunningham Bowler + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * NOTES: + * This is a C program that is intended to be linked against libpng. It + * generates bitmaps internally, stores them as PNG files (using the + * sequential write code) then reads them back (using the sequential + * read code) and validates that the result has the correct data. + * + * The program can be modified and extended to test the correctness of + * transformations performed by libpng. + */ + +#define _POSIX_SOURCE 1 +#define _ISOC99_SOURCE 1 /* For floating point */ +#define _GNU_SOURCE 1 /* For the floating point exception extension */ + +#include +#include + +#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) +# include +#endif + +#ifdef HAVE_FEENABLEEXCEPT /* from config.h, if included */ +# include +#endif + +/* Define the following to use this test against your installed libpng, rather + * than the one being built here: + */ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../../png.h" +#endif + +#ifdef PNG_WRITE_SUPPORTED /* else pngvalid can do nothing */ + +#if PNG_LIBPNG_VER < 10500 +/* This deliberately lacks the PNG_CONST. */ +typedef png_byte *png_const_bytep; + +/* This is copied from 1.5.1 png.h: */ +#define PNG_INTERLACE_ADAM7_PASSES 7 +#define PNG_PASS_START_ROW(pass) (((1U&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1U& (pass))<<(3-(((pass)+1)>>1)))&7) +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) +#define PNG_ROW_FROM_PASS_ROW(yIn, pass) \ + (((yIn)<>(((7-(off))-(pass))<<2)) & 0xFU) | \ + ((0x01145AF0U>>(((7-(off))-(pass))<<2)) & 0xF0U)) +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +/* These are needed too for the default build: */ +#define PNG_WRITE_16BIT_SUPPORTED +#define PNG_READ_16BIT_SUPPORTED + +/* This comes from pnglibconf.h afer 1.5: */ +#define PNG_FP_1 100000 +#define PNG_GAMMA_THRESHOLD_FIXED\ + ((png_fixed_point)(PNG_GAMMA_THRESHOLD * PNG_FP_1)) +#endif + +#if PNG_LIBPNG_VER < 10600 + /* 1.6.0 constifies many APIs, the following exists to allow pngvalid to be + * compiled against earlier versions. + */ +# define png_const_structp png_structp +#endif + +#include /* For crc32 */ + +#include /* For floating point constants */ +#include /* For malloc */ +#include /* For memcpy, memset */ +#include /* For floor */ + +/* Unused formal parameter errors are removed using the following macro which is + * expected to have no bad effects on performance. + */ +#ifndef UNUSED +# if defined(__GNUC__) || defined(_MSC_VER) +# define UNUSED(param) (void)param; +# else +# define UNUSED(param) +# endif +#endif + +/***************************** EXCEPTION HANDLING *****************************/ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../visupng/cexcept.h" +#endif + +#ifdef __cplusplus +# define this not_the_cpp_this +# define new not_the_cpp_new +# define voidcast(type, value) static_cast(value) +#else +# define voidcast(type, value) (value) +#endif /* __cplusplus */ + +struct png_store; +define_exception_type(struct png_store*); + +/* The following are macros to reduce typing everywhere where the well known + * name 'the_exception_context' must be defined. + */ +#define anon_context(ps) struct exception_context *the_exception_context = \ + &(ps)->exception_context +#define context(ps,fault) anon_context(ps); png_store *fault + +/******************************* UTILITIES ************************************/ +/* Error handling is particularly problematic in production code - error + * handlers often themselves have bugs which lead to programs that detect + * minor errors crashing. The following functions deal with one very + * common class of errors in error handlers - attempting to format error or + * warning messages into buffers that are too small. + */ +static size_t safecat(char *buffer, size_t bufsize, size_t pos, + PNG_CONST char *cat) +{ + while (pos < bufsize && cat != NULL && *cat != 0) + buffer[pos++] = *cat++; + + if (pos >= bufsize) + pos = bufsize-1; + + buffer[pos] = 0; + return pos; +} + +static size_t safecatn(char *buffer, size_t bufsize, size_t pos, int n) +{ + char number[64]; + sprintf(number, "%d", n); + return safecat(buffer, bufsize, pos, number); +} + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +static size_t safecatd(char *buffer, size_t bufsize, size_t pos, double d, + int precision) +{ + char number[64]; + sprintf(number, "%.*f", precision, d); + return safecat(buffer, bufsize, pos, number); +} +#endif + +static PNG_CONST char invalid[] = "invalid"; +static PNG_CONST char sep[] = ": "; + +static PNG_CONST char *colour_types[8] = +{ + "grayscale", invalid, "truecolour", "indexed-colour", + "grayscale with alpha", invalid, "truecolour with alpha", invalid +}; + +#ifdef PNG_READ_SUPPORTED +/* Convert a double precision value to fixed point. */ +static png_fixed_point +fix(double d) +{ + d = floor(d * PNG_FP_1 + .5); + return (png_fixed_point)d; +} +#endif /* PNG_READ_SUPPORTED */ + +/* Generate random bytes. This uses a boring repeatable algorithm and it + * is implemented here so that it gives the same set of numbers on every + * architecture. It's a linear congruential generator (Knuth or Sedgewick + * "Algorithms") but it comes from the 'feedback taps' table in Horowitz and + * Hill, "The Art of Electronics" (Pseudo-Random Bit Sequences and Noise + * Generation.) + */ +static void +make_random_bytes(png_uint_32* seed, void* pv, size_t size) +{ + png_uint_32 u0 = seed[0], u1 = seed[1]; + png_bytep bytes = voidcast(png_bytep, pv); + + /* There are thirty three bits, the next bit in the sequence is bit-33 XOR + * bit-20. The top 1 bit is in u1, the bottom 32 are in u0. + */ + size_t i; + for (i=0; i> (20-8)) ^ ((u1 << 7) | (u0 >> (32-7)))) & 0xff; + u1 <<= 8; + u1 |= u0 >> 24; + u0 <<= 8; + u0 |= u; + *bytes++ = (png_byte)u; + } + + seed[0] = u0; + seed[1] = u1; +} + +static void +make_four_random_bytes(png_uint_32* seed, png_bytep bytes) +{ + make_random_bytes(seed, bytes, 4); +} + +#ifdef PNG_READ_SUPPORTED +static void +randomize(void *pv, size_t size) +{ + static png_uint_32 random_seed[2] = {0x56789abc, 0xd}; + make_random_bytes(random_seed, pv, size); +} + +#define RANDOMIZE(this) randomize(&(this), sizeof (this)) + +static unsigned int +random_mod(unsigned int max) +{ + unsigned int x; + + RANDOMIZE(x); + + return x % max; /* 0 .. max-1 */ +} + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +static int +random_choice(void) +{ + unsigned char x; + + RANDOMIZE(x); + + return x & 1; +} +#endif +#endif /* PNG_READ_SUPPORTED */ + +/* A numeric ID based on PNG file characteristics. The 'do_interlace' field + * simply records whether pngvalid did the interlace itself or whether it + * was done by libpng. Width and height must be less than 256. 'palette' is an + * index of the palette to use for formats with a palette (0 otherwise.) + */ +#define FILEID(col, depth, palette, interlace, width, height, do_interlace) \ + ((png_uint_32)((col) + ((depth)<<3) + ((palette)<<8) + ((interlace)<<13) + \ + (((do_interlace)!=0)<<15) + ((width)<<16) + ((height)<<24))) + +#define COL_FROM_ID(id) ((png_byte)((id)& 0x7U)) +#define DEPTH_FROM_ID(id) ((png_byte)(((id) >> 3) & 0x1fU)) +#define PALETTE_FROM_ID(id) (((id) >> 8) & 0x1f) +#define INTERLACE_FROM_ID(id) ((int)(((id) >> 13) & 0x3)) +#define DO_INTERLACE_FROM_ID(id) ((int)(((id)>>15) & 1)) +#define WIDTH_FROM_ID(id) (((id)>>16) & 0xff) +#define HEIGHT_FROM_ID(id) (((id)>>24) & 0xff) + +/* Utility to construct a standard name for a standard image. */ +static size_t +standard_name(char *buffer, size_t bufsize, size_t pos, png_byte colour_type, + int bit_depth, unsigned int npalette, int interlace_type, + png_uint_32 w, png_uint_32 h, int do_interlace) +{ + pos = safecat(buffer, bufsize, pos, colour_types[colour_type]); + if (npalette > 0) + { + pos = safecat(buffer, bufsize, pos, "["); + pos = safecatn(buffer, bufsize, pos, npalette); + pos = safecat(buffer, bufsize, pos, "]"); + } + pos = safecat(buffer, bufsize, pos, " "); + pos = safecatn(buffer, bufsize, pos, bit_depth); + pos = safecat(buffer, bufsize, pos, " bit"); + + if (interlace_type != PNG_INTERLACE_NONE) + { + pos = safecat(buffer, bufsize, pos, " interlaced"); + if (do_interlace) + pos = safecat(buffer, bufsize, pos, "(pngvalid)"); + else + pos = safecat(buffer, bufsize, pos, "(libpng)"); + } + + if (w > 0 || h > 0) + { + pos = safecat(buffer, bufsize, pos, " "); + pos = safecatn(buffer, bufsize, pos, w); + pos = safecat(buffer, bufsize, pos, "x"); + pos = safecatn(buffer, bufsize, pos, h); + } + + return pos; +} + +static size_t +standard_name_from_id(char *buffer, size_t bufsize, size_t pos, png_uint_32 id) +{ + return standard_name(buffer, bufsize, pos, COL_FROM_ID(id), + DEPTH_FROM_ID(id), PALETTE_FROM_ID(id), INTERLACE_FROM_ID(id), + WIDTH_FROM_ID(id), HEIGHT_FROM_ID(id), DO_INTERLACE_FROM_ID(id)); +} + +/* Convenience API and defines to list valid formats. Note that 16 bit read and + * write support is required to do 16 bit read tests (we must be able to make a + * 16 bit image to test!) + */ +#ifdef PNG_WRITE_16BIT_SUPPORTED +# define WRITE_BDHI 4 +# ifdef PNG_READ_16BIT_SUPPORTED +# define READ_BDHI 4 +# define DO_16BIT +# endif +#else +# define WRITE_BDHI 3 +#endif +#ifndef DO_16BIT +# define READ_BDHI 3 +#endif + +/* The following defines the number of different palettes to generate for + * each log bit depth of a colour type 3 standard image. + */ +#define PALETTE_COUNT(bit_depth) ((bit_depth) > 4 ? 1U : 16U) + +static int +next_format(png_bytep colour_type, png_bytep bit_depth, + unsigned int* palette_number) +{ + if (*bit_depth == 0) + { + *colour_type = 0, *bit_depth = 1, *palette_number = 0; + return 1; + } + + if (*colour_type == 3) + { + /* Add multiple palettes for colour type 3. */ + if (++*palette_number < PALETTE_COUNT(*bit_depth)) + return 1; + + *palette_number = 0; + } + + *bit_depth = (png_byte)(*bit_depth << 1); + + /* Palette images are restricted to 8 bit depth */ + if (*bit_depth <= 8 +# ifdef DO_16BIT + || (*colour_type != 3 && *bit_depth <= 16) +# endif + ) + return 1; + + /* Move to the next color type, or return 0 at the end. */ + switch (*colour_type) + { + case 0: + *colour_type = 2; + *bit_depth = 8; + return 1; + + case 2: + *colour_type = 3; + *bit_depth = 1; + return 1; + + case 3: + *colour_type = 4; + *bit_depth = 8; + return 1; + + case 4: + *colour_type = 6; + *bit_depth = 8; + return 1; + + default: + return 0; + } +} + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +static unsigned int +sample(png_const_bytep row, png_byte colour_type, png_byte bit_depth, + png_uint_32 x, unsigned int sample_index) +{ + png_uint_32 bit_index, result; + + /* Find a sample index for the desired sample: */ + x *= bit_depth; + bit_index = x; + + if ((colour_type & 1) == 0) /* !palette */ + { + if (colour_type & 2) + bit_index *= 3; + + if (colour_type & 4) + bit_index += x; /* Alpha channel */ + + /* Multiple channels; select one: */ + if (colour_type & (2+4)) + bit_index += sample_index * bit_depth; + } + + /* Return the sample from the row as an integer. */ + row += bit_index >> 3; + result = *row; + + if (bit_depth == 8) + return result; + + else if (bit_depth > 8) + return (result << 8) + *++row; + + /* Less than 8 bits per sample. */ + bit_index &= 7; + return (result >> (8-bit_index-bit_depth)) & ((1U<> 3] & ~destMask; + unsigned int sourceByte = fromBuffer[fromIndex >> 3]; + + /* Don't rely on << or >> supporting '0' here, just in case: */ + fromIndex &= 7; + if (fromIndex > 0) sourceByte <<= fromIndex; + if ((toIndex & 7) > 0) sourceByte >>= toIndex & 7; + + toBuffer[toIndex >> 3] = (png_byte)(destByte | (sourceByte & destMask)); + } + else /* One or more bytes */ + memmove(toBuffer+(toIndex>>3), fromBuffer+(fromIndex>>3), pixelSize>>3); +} + +#ifdef PNG_READ_SUPPORTED +/* Copy a complete row of pixels, taking into account potential partial + * bytes at the end. + */ +static void +row_copy(png_bytep toBuffer, png_const_bytep fromBuffer, unsigned int bitWidth) +{ + memcpy(toBuffer, fromBuffer, bitWidth >> 3); + + if ((bitWidth & 7) != 0) + { + unsigned int mask; + + toBuffer += bitWidth >> 3; + fromBuffer += bitWidth >> 3; + /* The remaining bits are in the top of the byte, the mask is the bits to + * retain. + */ + mask = 0xff >> (bitWidth & 7); + *toBuffer = (png_byte)((*toBuffer & mask) | (*fromBuffer & ~mask)); + } +} + +/* Compare pixels - they are assumed to start at the first byte in the + * given buffers. + */ +static int +pixel_cmp(png_const_bytep pa, png_const_bytep pb, png_uint_32 bit_width) +{ +#if PNG_LIBPNG_VER < 10506 + if (memcmp(pa, pb, bit_width>>3) == 0) + { + png_uint_32 p; + + if ((bit_width & 7) == 0) return 0; + + /* Ok, any differences? */ + p = pa[bit_width >> 3]; + p ^= pb[bit_width >> 3]; + + if (p == 0) return 0; + + /* There are, but they may not be significant, remove the bits + * after the end (the low order bits in PNG.) + */ + bit_width &= 7; + p >>= 8-bit_width; + + if (p == 0) return 0; + } +#else + /* From libpng-1.5.6 the overwrite should be fixed, so compare the trailing + * bits too: + */ + if (memcmp(pa, pb, (bit_width+7)>>3) == 0) + return 0; +#endif + + /* Return the index of the changed byte. */ + { + png_uint_32 where = 0; + + while (pa[where] == pb[where]) ++where; + return 1+where; + } +} +#endif /* PNG_READ_SUPPORTED */ + +/*************************** BASIC PNG FILE WRITING ***************************/ +/* A png_store takes data from the sequential writer or provides data + * to the sequential reader. It can also store the result of a PNG + * write for later retrieval. + */ +#define STORE_BUFFER_SIZE 500 /* arbitrary */ +typedef struct png_store_buffer +{ + struct png_store_buffer* prev; /* NOTE: stored in reverse order */ + png_byte buffer[STORE_BUFFER_SIZE]; +} png_store_buffer; + +#define FILE_NAME_SIZE 64 + +typedef struct store_palette_entry /* record of a single palette entry */ +{ + png_byte red; + png_byte green; + png_byte blue; + png_byte alpha; +} store_palette_entry, store_palette[256]; + +typedef struct png_store_file +{ + struct png_store_file* next; /* as many as you like... */ + char name[FILE_NAME_SIZE]; + png_uint_32 id; /* must be correct (see FILEID) */ + png_size_t datacount; /* In this (the last) buffer */ + png_store_buffer data; /* Last buffer in file */ + int npalette; /* Number of entries in palette */ + store_palette_entry* palette; /* May be NULL */ +} png_store_file; + +/* The following is a pool of memory allocated by a single libpng read or write + * operation. + */ +typedef struct store_pool +{ + struct png_store *store; /* Back pointer */ + struct store_memory *list; /* List of allocated memory */ + png_byte mark[4]; /* Before and after data */ + + /* Statistics for this run. */ + png_alloc_size_t max; /* Maximum single allocation */ + png_alloc_size_t current; /* Current allocation */ + png_alloc_size_t limit; /* Highest current allocation */ + png_alloc_size_t total; /* Total allocation */ + + /* Overall statistics (retained across successive runs). */ + png_alloc_size_t max_max; + png_alloc_size_t max_limit; + png_alloc_size_t max_total; +} store_pool; + +typedef struct png_store +{ + /* For cexcept.h exception handling - simply store one of these; + * the context is a self pointer but it may point to a different + * png_store (in fact it never does in this program.) + */ + struct exception_context + exception_context; + + unsigned int verbose :1; + unsigned int treat_warnings_as_errors :1; + unsigned int expect_error :1; + unsigned int expect_warning :1; + unsigned int saw_warning :1; + unsigned int speed :1; + unsigned int progressive :1; /* use progressive read */ + unsigned int validated :1; /* used as a temporary flag */ + int nerrors; + int nwarnings; + char test[128]; /* Name of test */ + char error[256]; + + /* Read fields */ + png_structp pread; /* Used to read a saved file */ + png_infop piread; + png_store_file* current; /* Set when reading */ + png_store_buffer* next; /* Set when reading */ + png_size_t readpos; /* Position in *next */ + png_byte* image; /* Buffer for reading interlaced images */ + png_size_t cb_image; /* Size of this buffer */ + png_size_t cb_row; /* Row size of the image(s) */ + png_uint_32 image_h; /* Number of rows in a single image */ + store_pool read_memory_pool; + + /* Write fields */ + png_store_file* saved; + png_structp pwrite; /* Used when writing a new file */ + png_infop piwrite; + png_size_t writepos; /* Position in .new */ + char wname[FILE_NAME_SIZE]; + png_store_buffer new; /* The end of the new PNG file being written. */ + store_pool write_memory_pool; + store_palette_entry* palette; + int npalette; +} png_store; + +/* Initialization and cleanup */ +static void +store_pool_mark(png_bytep mark) +{ + static png_uint_32 store_seed[2] = { 0x12345678, 1}; + + make_four_random_bytes(store_seed, mark); +} + +#ifdef PNG_READ_SUPPORTED +/* Use this for random 32 bit values; this function makes sure the result is + * non-zero. + */ +static png_uint_32 +random_32(void) +{ + + for(;;) + { + png_byte mark[4]; + png_uint_32 result; + + store_pool_mark(mark); + result = png_get_uint_32(mark); + + if (result != 0) + return result; + } +} +#endif /* PNG_READ_SUPPORTED */ + +static void +store_pool_init(png_store *ps, store_pool *pool) +{ + memset(pool, 0, sizeof *pool); + + pool->store = ps; + pool->list = NULL; + pool->max = pool->current = pool->limit = pool->total = 0; + pool->max_max = pool->max_limit = pool->max_total = 0; + store_pool_mark(pool->mark); +} + +static void +store_init(png_store* ps) +{ + memset(ps, 0, sizeof *ps); + init_exception_context(&ps->exception_context); + store_pool_init(ps, &ps->read_memory_pool); + store_pool_init(ps, &ps->write_memory_pool); + ps->verbose = 0; + ps->treat_warnings_as_errors = 0; + ps->expect_error = 0; + ps->expect_warning = 0; + ps->saw_warning = 0; + ps->speed = 0; + ps->progressive = 0; + ps->validated = 0; + ps->nerrors = ps->nwarnings = 0; + ps->pread = NULL; + ps->piread = NULL; + ps->saved = ps->current = NULL; + ps->next = NULL; + ps->readpos = 0; + ps->image = NULL; + ps->cb_image = 0; + ps->cb_row = 0; + ps->image_h = 0; + ps->pwrite = NULL; + ps->piwrite = NULL; + ps->writepos = 0; + ps->new.prev = NULL; + ps->palette = NULL; + ps->npalette = 0; +} + +static void +store_freebuffer(png_store_buffer* psb) +{ + if (psb->prev) + { + store_freebuffer(psb->prev); + free(psb->prev); + psb->prev = NULL; + } +} + +static void +store_freenew(png_store *ps) +{ + store_freebuffer(&ps->new); + ps->writepos = 0; + if (ps->palette != NULL) + { + free(ps->palette); + ps->palette = NULL; + ps->npalette = 0; + } +} + +static void +store_storenew(png_store *ps) +{ + png_store_buffer *pb; + + if (ps->writepos != STORE_BUFFER_SIZE) + png_error(ps->pwrite, "invalid store call"); + + pb = voidcast(png_store_buffer*, malloc(sizeof *pb)); + + if (pb == NULL) + png_error(ps->pwrite, "store new: OOM"); + + *pb = ps->new; + ps->new.prev = pb; + ps->writepos = 0; +} + +static void +store_freefile(png_store_file **ppf) +{ + if (*ppf != NULL) + { + store_freefile(&(*ppf)->next); + + store_freebuffer(&(*ppf)->data); + (*ppf)->datacount = 0; + if ((*ppf)->palette != NULL) + { + free((*ppf)->palette); + (*ppf)->palette = NULL; + (*ppf)->npalette = 0; + } + free(*ppf); + *ppf = NULL; + } +} + +/* Main interface to file storeage, after writing a new PNG file (see the API + * below) call store_storefile to store the result with the given name and id. + */ +static void +store_storefile(png_store *ps, png_uint_32 id) +{ + png_store_file *pf = voidcast(png_store_file*, malloc(sizeof *pf)); + if (pf == NULL) + png_error(ps->pwrite, "storefile: OOM"); + safecat(pf->name, sizeof pf->name, 0, ps->wname); + pf->id = id; + pf->data = ps->new; + pf->datacount = ps->writepos; + ps->new.prev = NULL; + ps->writepos = 0; + pf->palette = ps->palette; + pf->npalette = ps->npalette; + ps->palette = 0; + ps->npalette = 0; + + /* And save it. */ + pf->next = ps->saved; + ps->saved = pf; +} + +/* Generate an error message (in the given buffer) */ +static size_t +store_message(png_store *ps, png_const_structp pp, char *buffer, size_t bufsize, + size_t pos, PNG_CONST char *msg) +{ + if (pp != NULL && pp == ps->pread) + { + /* Reading a file */ + pos = safecat(buffer, bufsize, pos, "read: "); + + if (ps->current != NULL) + { + pos = safecat(buffer, bufsize, pos, ps->current->name); + pos = safecat(buffer, bufsize, pos, sep); + } + } + + else if (pp != NULL && pp == ps->pwrite) + { + /* Writing a file */ + pos = safecat(buffer, bufsize, pos, "write: "); + pos = safecat(buffer, bufsize, pos, ps->wname); + pos = safecat(buffer, bufsize, pos, sep); + } + + else + { + /* Neither reading nor writing (or a memory error in struct delete) */ + pos = safecat(buffer, bufsize, pos, "pngvalid: "); + } + + if (ps->test[0] != 0) + { + pos = safecat(buffer, bufsize, pos, ps->test); + pos = safecat(buffer, bufsize, pos, sep); + } + pos = safecat(buffer, bufsize, pos, msg); + return pos; +} + +/* Verbose output to the error stream: */ +static void +store_verbose(png_store *ps, png_const_structp pp, png_const_charp prefix, + png_const_charp message) +{ + char buffer[512]; + + if (prefix) + fputs(prefix, stderr); + + (void)store_message(ps, pp, buffer, sizeof buffer, 0, message); + fputs(buffer, stderr); + fputc('\n', stderr); +} + +/* Log an error or warning - the relevant count is always incremented. */ +static void +store_log(png_store* ps, png_const_structp pp, png_const_charp message, + int is_error) +{ + /* The warning is copied to the error buffer if there are no errors and it is + * the first warning. The error is copied to the error buffer if it is the + * first error (overwriting any prior warnings). + */ + if (is_error ? (ps->nerrors)++ == 0 : + (ps->nwarnings)++ == 0 && ps->nerrors == 0) + store_message(ps, pp, ps->error, sizeof ps->error, 0, message); + + if (ps->verbose) + store_verbose(ps, pp, is_error ? "error: " : "warning: ", message); +} + +#ifdef PNG_READ_SUPPORTED +/* Internal error function, called with a png_store but no libpng stuff. */ +static void +internal_error(png_store *ps, png_const_charp message) +{ + store_log(ps, NULL, message, 1 /* error */); + + /* And finally throw an exception. */ + { + struct exception_context *the_exception_context = &ps->exception_context; + Throw ps; + } +} +#endif /* PNG_READ_SUPPORTED */ + +/* Functions to use as PNG callbacks. */ +static void +store_error(png_structp ppIn, png_const_charp message) /* PNG_NORETURN */ +{ + png_const_structp pp = ppIn; + png_store *ps = voidcast(png_store*, png_get_error_ptr(pp)); + + if (!ps->expect_error) + store_log(ps, pp, message, 1 /* error */); + + /* And finally throw an exception. */ + { + struct exception_context *the_exception_context = &ps->exception_context; + Throw ps; + } +} + +static void +store_warning(png_structp ppIn, png_const_charp message) +{ + png_const_structp pp = ppIn; + png_store *ps = voidcast(png_store*, png_get_error_ptr(pp)); + + if (!ps->expect_warning) + store_log(ps, pp, message, 0 /* warning */); + else + ps->saw_warning = 1; +} + +/* These somewhat odd functions are used when reading an image to ensure that + * the buffer is big enough, the png_structp is for errors. + */ +/* Return a single row from the correct image. */ +static png_bytep +store_image_row(PNG_CONST png_store* ps, png_const_structp pp, int nImage, + png_uint_32 y) +{ + png_size_t coffset = (nImage * ps->image_h + y) * (ps->cb_row + 5) + 2; + + if (ps->image == NULL) + png_error(pp, "no allocated image"); + + if (coffset + ps->cb_row + 3 > ps->cb_image) + png_error(pp, "image too small"); + + return ps->image + coffset; +} + +static void +store_image_free(png_store *ps, png_const_structp pp) +{ + if (ps->image != NULL) + { + png_bytep image = ps->image; + + if (image[-1] != 0xed || image[ps->cb_image] != 0xfe) + { + if (pp != NULL) + png_error(pp, "png_store image overwrite (1)"); + else + store_log(ps, NULL, "png_store image overwrite (2)", 1); + } + + ps->image = NULL; + ps->cb_image = 0; + --image; + free(image); + } +} + +static void +store_ensure_image(png_store *ps, png_const_structp pp, int nImages, + png_size_t cbRow, png_uint_32 cRows) +{ + png_size_t cb = nImages * cRows * (cbRow + 5); + + if (ps->cb_image < cb) + { + png_bytep image; + + store_image_free(ps, pp); + + /* The buffer is deliberately mis-aligned. */ + image = voidcast(png_bytep, malloc(cb+2)); + if (image == NULL) + { + /* Called from the startup - ignore the error for the moment. */ + if (pp == NULL) + return; + + png_error(pp, "OOM allocating image buffer"); + } + + /* These magic tags are used to detect overwrites above. */ + ++image; + image[-1] = 0xed; + image[cb] = 0xfe; + + ps->image = image; + ps->cb_image = cb; + } + + /* We have an adequate sized image; lay out the rows. There are 2 bytes at + * the start and three at the end of each (this ensures that the row + * alignment starts out odd - 2+1 and changes for larger images on each row.) + */ + ps->cb_row = cbRow; + ps->image_h = cRows; + + /* For error checking, the whole buffer is set to 10110010 (0xb2 - 178). + * This deliberately doesn't match the bits in the size test image which are + * outside the image; these are set to 0xff (all 1). To make the row + * comparison work in the 'size' test case the size rows are pre-initialized + * to the same value prior to calling 'standard_row'. + */ + memset(ps->image, 178, cb); + + /* Then put in the marks. */ + while (--nImages >= 0) + { + png_uint_32 y; + + for (y=0; yimage; + + if (image[-1] != 0xed || image[ps->cb_image] != 0xfe) + png_error(pp, "image overwrite"); + else + { + png_size_t cbRow = ps->cb_row; + png_uint_32 rows = ps->image_h; + + image += iImage * (cbRow+5) * ps->image_h; + + image += 2; /* skip image first row markers */ + + while (rows-- > 0) + { + if (image[-2] != 190 || image[-1] != 239) + png_error(pp, "row start overwritten"); + + if (image[cbRow] != 222 || image[cbRow+1] != 173 || + image[cbRow+2] != 17) + png_error(pp, "row end overwritten"); + + image += cbRow+5; + } + } +} +#endif /* PNG_READ_SUPPORTED */ + +static void +store_write(png_structp ppIn, png_bytep pb, png_size_t st) +{ + png_const_structp pp = ppIn; + png_store *ps = voidcast(png_store*, png_get_io_ptr(pp)); + + if (ps->pwrite != pp) + png_error(pp, "store state damaged"); + + while (st > 0) + { + size_t cb; + + if (ps->writepos >= STORE_BUFFER_SIZE) + store_storenew(ps); + + cb = st; + + if (cb > STORE_BUFFER_SIZE - ps->writepos) + cb = STORE_BUFFER_SIZE - ps->writepos; + + memcpy(ps->new.buffer + ps->writepos, pb, cb); + pb += cb; + st -= cb; + ps->writepos += cb; + } +} + +static void +store_flush(png_structp ppIn) +{ + UNUSED(ppIn) /*DOES NOTHING*/ +} + +#ifdef PNG_READ_SUPPORTED +static size_t +store_read_buffer_size(png_store *ps) +{ + /* Return the bytes available for read in the current buffer. */ + if (ps->next != &ps->current->data) + return STORE_BUFFER_SIZE; + + return ps->current->datacount; +} + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +/* Return total bytes available for read. */ +static size_t +store_read_buffer_avail(png_store *ps) +{ + if (ps->current != NULL && ps->next != NULL) + { + png_store_buffer *next = &ps->current->data; + size_t cbAvail = ps->current->datacount; + + while (next != ps->next && next != NULL) + { + next = next->prev; + cbAvail += STORE_BUFFER_SIZE; + } + + if (next != ps->next) + png_error(ps->pread, "buffer read error"); + + if (cbAvail > ps->readpos) + return cbAvail - ps->readpos; + } + + return 0; +} +#endif + +static int +store_read_buffer_next(png_store *ps) +{ + png_store_buffer *pbOld = ps->next; + png_store_buffer *pbNew = &ps->current->data; + if (pbOld != pbNew) + { + while (pbNew != NULL && pbNew->prev != pbOld) + pbNew = pbNew->prev; + + if (pbNew != NULL) + { + ps->next = pbNew; + ps->readpos = 0; + return 1; + } + + png_error(ps->pread, "buffer lost"); + } + + return 0; /* EOF or error */ +} + +/* Need separate implementation and callback to allow use of the same code + * during progressive read, where the io_ptr is set internally by libpng. + */ +static void +store_read_imp(png_store *ps, png_bytep pb, png_size_t st) +{ + if (ps->current == NULL || ps->next == NULL) + png_error(ps->pread, "store state damaged"); + + while (st > 0) + { + size_t cbAvail = store_read_buffer_size(ps) - ps->readpos; + + if (cbAvail > 0) + { + if (cbAvail > st) cbAvail = st; + memcpy(pb, ps->next->buffer + ps->readpos, cbAvail); + st -= cbAvail; + pb += cbAvail; + ps->readpos += cbAvail; + } + + else if (!store_read_buffer_next(ps)) + png_error(ps->pread, "read beyond end of file"); + } +} + +static void +store_read(png_structp ppIn, png_bytep pb, png_size_t st) +{ + png_const_structp pp = ppIn; + png_store *ps = voidcast(png_store*, png_get_io_ptr(pp)); + + if (ps == NULL || ps->pread != pp) + png_error(pp, "bad store read call"); + + store_read_imp(ps, pb, st); +} + +static void +store_progressive_read(png_store *ps, png_structp pp, png_infop pi) +{ + /* Notice that a call to store_read will cause this function to fail because + * readpos will be set. + */ + if (ps->pread != pp || ps->current == NULL || ps->next == NULL) + png_error(pp, "store state damaged (progressive)"); + + do + { + if (ps->readpos != 0) + png_error(pp, "store_read called during progressive read"); + + png_process_data(pp, pi, ps->next->buffer, store_read_buffer_size(ps)); + } + while (store_read_buffer_next(ps)); +} +#endif /* PNG_READ_SUPPORTED */ + +/* The caller must fill this in: */ +static store_palette_entry * +store_write_palette(png_store *ps, int npalette) +{ + if (ps->pwrite == NULL) + store_log(ps, NULL, "attempt to write palette without write stream", 1); + + if (ps->palette != NULL) + png_error(ps->pwrite, "multiple store_write_palette calls"); + + /* This function can only return NULL if called with '0'! */ + if (npalette > 0) + { + ps->palette = voidcast(store_palette_entry*, malloc(npalette * + sizeof *ps->palette)); + + if (ps->palette == NULL) + png_error(ps->pwrite, "store new palette: OOM"); + + ps->npalette = npalette; + } + + return ps->palette; +} + +#ifdef PNG_READ_SUPPORTED +static store_palette_entry * +store_current_palette(png_store *ps, int *npalette) +{ + /* This is an internal error (the call has been made outside a read + * operation.) + */ + if (ps->current == NULL) + store_log(ps, ps->pread, "no current stream for palette", 1); + + /* The result may be null if there is no palette. */ + *npalette = ps->current->npalette; + return ps->current->palette; +} +#endif /* PNG_READ_SUPPORTED */ + +/***************************** MEMORY MANAGEMENT*** ***************************/ +/* A store_memory is simply the header for an allocated block of memory. The + * pointer returned to libpng is just after the end of the header block, the + * allocated memory is followed by a second copy of the 'mark'. + */ +typedef struct store_memory +{ + store_pool *pool; /* Originating pool */ + struct store_memory *next; /* Singly linked list */ + png_alloc_size_t size; /* Size of memory allocated */ + png_byte mark[4]; /* ID marker */ +} store_memory; + +/* Handle a fatal error in memory allocation. This calls png_error if the + * libpng struct is non-NULL, else it outputs a message and returns. This means + * that a memory problem while libpng is running will abort (png_error) the + * handling of particular file while one in cleanup (after the destroy of the + * struct has returned) will simply keep going and free (or attempt to free) + * all the memory. + */ +static void +store_pool_error(png_store *ps, png_const_structp pp, PNG_CONST char *msg) +{ + if (pp != NULL) + png_error(pp, msg); + + /* Else we have to do it ourselves. png_error eventually calls store_log, + * above. store_log accepts a NULL png_structp - it just changes what gets + * output by store_message. + */ + store_log(ps, pp, msg, 1 /* error */); +} + +static void +store_memory_free(png_const_structp pp, store_pool *pool, store_memory *memory) +{ + /* Note that pp may be NULL (see store_pool_delete below), the caller has + * found 'memory' in pool->list *and* unlinked this entry, so this is a valid + * pointer (for sure), but the contents may have been trashed. + */ + if (memory->pool != pool) + store_pool_error(pool->store, pp, "memory corrupted (pool)"); + + else if (memcmp(memory->mark, pool->mark, sizeof memory->mark) != 0) + store_pool_error(pool->store, pp, "memory corrupted (start)"); + + /* It should be safe to read the size field now. */ + else + { + png_alloc_size_t cb = memory->size; + + if (cb > pool->max) + store_pool_error(pool->store, pp, "memory corrupted (size)"); + + else if (memcmp((png_bytep)(memory+1)+cb, pool->mark, sizeof pool->mark) + != 0) + store_pool_error(pool->store, pp, "memory corrupted (end)"); + + /* Finally give the library a chance to find problems too: */ + else + { + pool->current -= cb; + free(memory); + } + } +} + +static void +store_pool_delete(png_store *ps, store_pool *pool) +{ + if (pool->list != NULL) + { + fprintf(stderr, "%s: %s %s: memory lost (list follows):\n", ps->test, + pool == &ps->read_memory_pool ? "read" : "write", + pool == &ps->read_memory_pool ? (ps->current != NULL ? + ps->current->name : "unknown file") : ps->wname); + ++ps->nerrors; + + do + { + store_memory *next = pool->list; + pool->list = next->next; + next->next = NULL; + + fprintf(stderr, "\t%lu bytes @ %p\n", + (unsigned long)next->size, (PNG_CONST void*)(next+1)); + /* The NULL means this will always return, even if the memory is + * corrupted. + */ + store_memory_free(NULL, pool, next); + } + while (pool->list != NULL); + } + + /* And reset the other fields too for the next time. */ + if (pool->max > pool->max_max) pool->max_max = pool->max; + pool->max = 0; + if (pool->current != 0) /* unexpected internal error */ + fprintf(stderr, "%s: %s %s: memory counter mismatch (internal error)\n", + ps->test, pool == &ps->read_memory_pool ? "read" : "write", + pool == &ps->read_memory_pool ? (ps->current != NULL ? + ps->current->name : "unknown file") : ps->wname); + pool->current = 0; + + if (pool->limit > pool->max_limit) + pool->max_limit = pool->limit; + + pool->limit = 0; + + if (pool->total > pool->max_total) + pool->max_total = pool->total; + + pool->total = 0; + + /* Get a new mark too. */ + store_pool_mark(pool->mark); +} + +/* The memory callbacks: */ +static png_voidp +store_malloc(png_structp ppIn, png_alloc_size_t cb) +{ + png_const_structp pp = ppIn; + store_pool *pool = voidcast(store_pool*, png_get_mem_ptr(pp)); + store_memory *new = voidcast(store_memory*, malloc(cb + (sizeof *new) + + (sizeof pool->mark))); + + if (new != NULL) + { + if (cb > pool->max) + pool->max = cb; + + pool->current += cb; + + if (pool->current > pool->limit) + pool->limit = pool->current; + + pool->total += cb; + + new->size = cb; + memcpy(new->mark, pool->mark, sizeof new->mark); + memcpy((png_byte*)(new+1) + cb, pool->mark, sizeof pool->mark); + new->pool = pool; + new->next = pool->list; + pool->list = new; + ++new; + } + + else + { + /* NOTE: the PNG user malloc function cannot use the png_ptr it is passed + * other than to retrieve the allocation pointer! libpng calls the + * store_malloc callback in two basic cases: + * + * 1) From png_malloc; png_malloc will do a png_error itself if NULL is + * returned. + * 2) From png_struct or png_info structure creation; png_malloc is + * to return so cleanup can be performed. + * + * To handle this store_malloc can log a message, but can't do anything + * else. + */ + store_log(pool->store, pp, "out of memory", 1 /* is_error */); + } + + return new; +} + +static void +store_free(png_structp ppIn, png_voidp memory) +{ + png_const_structp pp = ppIn; + store_pool *pool = voidcast(store_pool*, png_get_mem_ptr(pp)); + store_memory *this = voidcast(store_memory*, memory), **test; + + /* Because libpng calls store_free with a dummy png_struct when deleting + * png_struct or png_info via png_destroy_struct_2 it is necessary to check + * the passed in png_structp to ensure it is valid, and not pass it to + * png_error if it is not. + */ + if (pp != pool->store->pread && pp != pool->store->pwrite) + pp = NULL; + + /* First check that this 'memory' really is valid memory - it must be in the + * pool list. If it is, use the shared memory_free function to free it. + */ + --this; + for (test = &pool->list; *test != this; test = &(*test)->next) + { + if (*test == NULL) + { + store_pool_error(pool->store, pp, "bad pointer to free"); + return; + } + } + + /* Unlink this entry, *test == this. */ + *test = this->next; + this->next = NULL; + store_memory_free(pp, pool, this); +} + +/* Setup functions. */ +/* Cleanup when aborting a write or after storing the new file. */ +static void +store_write_reset(png_store *ps) +{ + if (ps->pwrite != NULL) + { + anon_context(ps); + + Try + png_destroy_write_struct(&ps->pwrite, &ps->piwrite); + + Catch_anonymous + { + /* memory corruption: continue. */ + } + + ps->pwrite = NULL; + ps->piwrite = NULL; + } + + /* And make sure that all the memory has been freed - this will output + * spurious errors in the case of memory corruption above, but this is safe. + */ + store_pool_delete(ps, &ps->write_memory_pool); + + store_freenew(ps); +} + +/* The following is the main write function, it returns a png_struct and, + * optionally, a png_info suitable for writiing a new PNG file. Use + * store_storefile above to record this file after it has been written. The + * returned libpng structures as destroyed by store_write_reset above. + */ +static png_structp +set_store_for_write(png_store *ps, png_infopp ppi, + PNG_CONST char * volatile name) +{ + anon_context(ps); + + Try + { + if (ps->pwrite != NULL) + png_error(ps->pwrite, "write store already in use"); + + store_write_reset(ps); + safecat(ps->wname, sizeof ps->wname, 0, name); + + /* Don't do the slow memory checks if doing a speed test. */ + if (ps->speed) + ps->pwrite = png_create_write_struct(PNG_LIBPNG_VER_STRING, + ps, store_error, store_warning); + + else + ps->pwrite = png_create_write_struct_2(PNG_LIBPNG_VER_STRING, + ps, store_error, store_warning, &ps->write_memory_pool, + store_malloc, store_free); + + png_set_write_fn(ps->pwrite, ps, store_write, store_flush); + + if (ppi != NULL) + *ppi = ps->piwrite = png_create_info_struct(ps->pwrite); + } + + Catch_anonymous + return NULL; + + return ps->pwrite; +} + +/* Cleanup when finished reading (either due to error or in the success case). + * This routine exists even when there is no read support to make the code + * tidier (avoid a mass of ifdefs) and so easier to maintain. + */ +static void +store_read_reset(png_store *ps) +{ +# ifdef PNG_READ_SUPPORTED + if (ps->pread != NULL) + { + anon_context(ps); + + Try + png_destroy_read_struct(&ps->pread, &ps->piread, NULL); + + Catch_anonymous + { + /* error already output: continue */ + } + + ps->pread = NULL; + ps->piread = NULL; + } +# endif + + /* Always do this to be safe. */ + store_pool_delete(ps, &ps->read_memory_pool); + + ps->current = NULL; + ps->next = NULL; + ps->readpos = 0; + ps->validated = 0; +} + +#ifdef PNG_READ_SUPPORTED +static void +store_read_set(png_store *ps, png_uint_32 id) +{ + png_store_file *pf = ps->saved; + + while (pf != NULL) + { + if (pf->id == id) + { + ps->current = pf; + ps->next = NULL; + store_read_buffer_next(ps); + return; + } + + pf = pf->next; + } + + { + size_t pos; + char msg[FILE_NAME_SIZE+64]; + + pos = standard_name_from_id(msg, sizeof msg, 0, id); + pos = safecat(msg, sizeof msg, pos, ": file not found"); + png_error(ps->pread, msg); + } +} + +/* The main interface for reading a saved file - pass the id number of the file + * to retrieve. Ids must be unique or the earlier file will be hidden. The API + * returns a png_struct and, optionally, a png_info. Both of these will be + * destroyed by store_read_reset above. + */ +static png_structp +set_store_for_read(png_store *ps, png_infopp ppi, png_uint_32 id, + PNG_CONST char *name) +{ + /* Set the name for png_error */ + safecat(ps->test, sizeof ps->test, 0, name); + + if (ps->pread != NULL) + png_error(ps->pread, "read store already in use"); + + store_read_reset(ps); + + /* Both the create APIs can return NULL if used in their default mode + * (because there is no other way of handling an error because the jmp_buf + * by default is stored in png_struct and that has not been allocated!) + * However, given that store_error works correctly in these circumstances + * we don't ever expect NULL in this program. + */ + if (ps->speed) + ps->pread = png_create_read_struct(PNG_LIBPNG_VER_STRING, ps, + store_error, store_warning); + + else + ps->pread = png_create_read_struct_2(PNG_LIBPNG_VER_STRING, ps, + store_error, store_warning, &ps->read_memory_pool, store_malloc, + store_free); + + if (ps->pread == NULL) + { + struct exception_context *the_exception_context = &ps->exception_context; + + store_log(ps, NULL, "png_create_read_struct returned NULL (unexpected)", + 1 /*error*/); + + Throw ps; + } + + store_read_set(ps, id); + + if (ppi != NULL) + *ppi = ps->piread = png_create_info_struct(ps->pread); + + return ps->pread; +} +#endif /* PNG_READ_SUPPORTED */ + +/* The overall cleanup of a store simply calls the above then removes all the + * saved files. This does not delete the store itself. + */ +static void +store_delete(png_store *ps) +{ + store_write_reset(ps); + store_read_reset(ps); + store_freefile(&ps->saved); + store_image_free(ps, NULL); +} + +/*********************** PNG FILE MODIFICATION ON READ ************************/ +/* Files may be modified on read. The following structure contains a complete + * png_store together with extra members to handle modification and a special + * read callback for libpng. To use this the 'modifications' field must be set + * to a list of png_modification structures that actually perform the + * modification, otherwise a png_modifier is functionally equivalent to a + * png_store. There is a special read function, set_modifier_for_read, which + * replaces set_store_for_read. + */ +typedef enum modifier_state +{ + modifier_start, /* Initial value */ + modifier_signature, /* Have a signature */ + modifier_IHDR /* Have an IHDR */ +} modifier_state; + +typedef struct CIE_color +{ + /* A single CIE tristimulus value, representing the unique response of a + * standard observer to a variety of light spectra. The observer recognizes + * all spectra that produce this response as the same color, therefore this + * is effectively a description of a color. + */ + double X, Y, Z; +} CIE_color; + +typedef struct color_encoding +{ + /* A description of an (R,G,B) encoding of color (as defined above); this + * includes the actual colors of the (R,G,B) triples (1,0,0), (0,1,0) and + * (0,0,1) plus an encoding value that is used to encode the linear + * components R, G and B to give the actual values R^gamma, G^gamma and + * B^gamma that are stored. + */ + double gamma; /* Encoding (file) gamma of space */ + CIE_color red, green, blue; /* End points */ +} color_encoding; + +#ifdef PNG_READ_SUPPORTED +static double +chromaticity_x(CIE_color c) +{ + return c.X / (c.X + c.Y + c.Z); +} + +static double +chromaticity_y(CIE_color c) +{ + return c.Y / (c.X + c.Y + c.Z); +} + +static CIE_color +white_point(PNG_CONST color_encoding *encoding) +{ + CIE_color white; + + white.X = encoding->red.X + encoding->green.X + encoding->blue.X; + white.Y = encoding->red.Y + encoding->green.Y + encoding->blue.Y; + white.Z = encoding->red.Z + encoding->green.Z + encoding->blue.Z; + + return white; +} + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +static void +normalize_color_encoding(color_encoding *encoding) +{ + PNG_CONST double whiteY = encoding->red.Y + encoding->green.Y + + encoding->blue.Y; + + if (whiteY != 1) + { + encoding->red.X /= whiteY; + encoding->red.Y /= whiteY; + encoding->red.Z /= whiteY; + encoding->green.X /= whiteY; + encoding->green.Y /= whiteY; + encoding->green.Z /= whiteY; + encoding->blue.X /= whiteY; + encoding->blue.Y /= whiteY; + encoding->blue.Z /= whiteY; + } +} +#endif + +static size_t +safecat_color_encoding(char *buffer, size_t bufsize, size_t pos, + PNG_CONST color_encoding *e, double encoding_gamma) +{ + if (e != 0) + { + if (encoding_gamma != 0) + pos = safecat(buffer, bufsize, pos, "("); + pos = safecat(buffer, bufsize, pos, "R("); + pos = safecatd(buffer, bufsize, pos, e->red.X, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->red.Y, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->red.Z, 4); + pos = safecat(buffer, bufsize, pos, "),G("); + pos = safecatd(buffer, bufsize, pos, e->green.X, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->green.Y, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->green.Z, 4); + pos = safecat(buffer, bufsize, pos, "),B("); + pos = safecatd(buffer, bufsize, pos, e->blue.X, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->blue.Y, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->blue.Z, 4); + pos = safecat(buffer, bufsize, pos, ")"); + if (encoding_gamma != 0) + pos = safecat(buffer, bufsize, pos, ")"); + } + + if (encoding_gamma != 0) + { + pos = safecat(buffer, bufsize, pos, "^"); + pos = safecatd(buffer, bufsize, pos, encoding_gamma, 5); + } + + return pos; +} +#endif /* PNG_READ_SUPPORTED */ + +typedef struct png_modifier +{ + png_store this; /* I am a png_store */ + struct png_modification *modifications; /* Changes to make */ + + modifier_state state; /* My state */ + + /* Information from IHDR: */ + png_byte bit_depth; /* From IHDR */ + png_byte colour_type; /* From IHDR */ + + /* While handling PLTE, IDAT and IEND these chunks may be pended to allow + * other chunks to be inserted. + */ + png_uint_32 pending_len; + png_uint_32 pending_chunk; + + /* Test values */ + double *gammas; + unsigned int ngammas; + unsigned int ngamma_tests; /* Number of gamma tests to run*/ + double current_gamma; /* 0 if not set */ + PNG_CONST color_encoding *encodings; + unsigned int nencodings; + PNG_CONST color_encoding *current_encoding; /* If an encoding has been set */ + unsigned int encoding_counter; /* For iteration */ + int encoding_ignored; /* Something overwrote it */ + + /* Control variables used to iterate through possible encodings, the + * following must be set to 0 and tested by the function that uses the + * png_modifier because the modifier only sets it to 1 (true.) + */ + unsigned int repeat :1; /* Repeat this transform test. */ + unsigned int test_uses_encoding :1; + + /* Lowest sbit to test (libpng fails for sbit < 8) */ + png_byte sbitlow; + + /* Error control - these are the limits on errors accepted by the gamma tests + * below. + */ + double maxout8; /* Maximum output value error */ + double maxabs8; /* Absolute sample error 0..1 */ + double maxcalc8; /* Absolute sample error 0..1 */ + double maxpc8; /* Percentage sample error 0..100% */ + double maxout16; /* Maximum output value error */ + double maxabs16; /* Absolute sample error 0..1 */ + double maxcalc16;/* Absolute sample error 0..1 */ + double maxpc16; /* Percentage sample error 0..100% */ + + /* This is set by transforms that need to allow a higher limit, it is an + * internal check on pngvalid to ensure that the calculated error limits are + * not ridiculous; without this it is too easy to make a mistake in pngvalid + * that allows any value through. + */ + double limit; /* limit on error values, normally 4E-3 */ + + /* Log limits - values above this are logged, but not necessarily + * warned. + */ + double log8; /* Absolute error in 8 bits to log */ + double log16; /* Absolute error in 16 bits to log */ + + /* Logged 8 and 16 bit errors ('output' values): */ + double error_gray_2; + double error_gray_4; + double error_gray_8; + double error_gray_16; + double error_color_8; + double error_color_16; + double error_indexed; + + /* Flags: */ + /* Whether to call png_read_update_info, not png_read_start_image, and how + * many times to call it. + */ + int use_update_info; + + /* Whether or not to interlace. */ + int interlace_type :9; /* int, but must store '1' */ + + /* Run the standard tests? */ + unsigned int test_standard :1; + + /* Run the odd-sized image and interlace read/write tests? */ + unsigned int test_size :1; + + /* Run tests on reading with a combiniation of transforms, */ + unsigned int test_transform :1; + + /* When to use the use_input_precision option: */ + unsigned int use_input_precision :1; + unsigned int use_input_precision_sbit :1; + unsigned int use_input_precision_16to8 :1; + + /* If set assume that the calculation bit depth is set by the input + * precision, not the output precision. + */ + unsigned int calculations_use_input_precision :1; + + /* If set assume that the calculations are done in 16 bits even if both input + * and output are 8 bit or less. + */ + unsigned int assume_16_bit_calculations :1; + + /* Which gamma tests to run: */ + unsigned int test_gamma_threshold :1; + unsigned int test_gamma_transform :1; /* main tests */ + unsigned int test_gamma_sbit :1; + unsigned int test_gamma_scale16 :1; + unsigned int test_gamma_background :1; + unsigned int test_gamma_alpha_mode :1; + unsigned int test_gamma_expand16 :1; + unsigned int test_exhaustive :1; + + unsigned int log :1; /* Log max error */ + + /* Buffer information, the buffer size limits the size of the chunks that can + * be modified - they must fit (including header and CRC) into the buffer! + */ + size_t flush; /* Count of bytes to flush */ + size_t buffer_count; /* Bytes in buffer */ + size_t buffer_position; /* Position in buffer */ + png_byte buffer[1024]; +} png_modifier; + +/* This returns true if the test should be stopped now because it has already + * failed and it is running silently. + */ +static int fail(png_modifier *pm) +{ + return !pm->log && !pm->this.verbose && (pm->this.nerrors > 0 || + (pm->this.treat_warnings_as_errors && pm->this.nwarnings > 0)); +} + +static void +modifier_init(png_modifier *pm) +{ + memset(pm, 0, sizeof *pm); + store_init(&pm->this); + pm->modifications = NULL; + pm->state = modifier_start; + pm->sbitlow = 1U; + pm->ngammas = 0; + pm->ngamma_tests = 0; + pm->gammas = 0; + pm->current_gamma = 0; + pm->encodings = 0; + pm->nencodings = 0; + pm->current_encoding = 0; + pm->encoding_counter = 0; + pm->encoding_ignored = 0; + pm->repeat = 0; + pm->test_uses_encoding = 0; + pm->maxout8 = pm->maxpc8 = pm->maxabs8 = pm->maxcalc8 = 0; + pm->maxout16 = pm->maxpc16 = pm->maxabs16 = pm->maxcalc16 = 0; + pm->limit = 4E-3; + pm->log8 = pm->log16 = 0; /* Means 'off' */ + pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = 0; + pm->error_gray_16 = pm->error_color_8 = pm->error_color_16 = 0; + pm->error_indexed = 0; + pm->use_update_info = 0; + pm->interlace_type = PNG_INTERLACE_NONE; + pm->test_standard = 0; + pm->test_size = 0; + pm->test_transform = 0; + pm->use_input_precision = 0; + pm->use_input_precision_sbit = 0; + pm->use_input_precision_16to8 = 0; + pm->calculations_use_input_precision = 0; + pm->test_gamma_threshold = 0; + pm->test_gamma_transform = 0; + pm->test_gamma_sbit = 0; + pm->test_gamma_scale16 = 0; + pm->test_gamma_background = 0; + pm->test_gamma_alpha_mode = 0; + pm->test_gamma_expand16 = 0; + pm->test_exhaustive = 0; + pm->log = 0; + + /* Rely on the memset for all the other fields - there are no pointers */ +} + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +/* If pm->calculations_use_input_precision is set then operations will happen + * with only 8 bit precision unless both the input and output bit depth are 16. + * + * If pm->assume_16_bit_calculations is set then even 8 bit calculations use 16 + * bit precision. This only affects those of the following limits that pertain + * to a calculation - not a digitization operation - unless the following API is + * called directly. + */ +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +static double digitize(PNG_CONST png_modifier *pm, double value, + int sample_depth, int do_round) +{ + /* 'value' is in the range 0 to 1, the result is the same value rounded to a + * multiple of the digitization factor - 8 or 16 bits depending on both the + * sample depth and the 'assume' setting. Digitization is normally by + * rounding and 'do_round' should be 1, if it is 0 the digitized value will + * be truncated. + */ + PNG_CONST unsigned int digitization_factor = + (pm->assume_16_bit_calculations || sample_depth == 16) ? 65535 : 255; + + /* Limiting the range is done as a convenience to the caller - it's easier to + * do it once here than every time at the call site. + */ + if (value <= 0) + value = 0; + else if (value >= 1) + value = 1; + + value *= digitization_factor; + if (do_round) value += .5; + return floor(value)/digitization_factor; +} +#endif + +#if defined(PNG_READ_GAMMA_SUPPORTED) ||\ + defined(PNG_READ_RGB_TO_GRAY_SUPPORTED) +static double abserr(PNG_CONST png_modifier *pm, int in_depth, int out_depth) +{ + /* Absolute error permitted in linear values - affected by the bit depth of + * the calculations. + */ + if (pm->assume_16_bit_calculations || (out_depth == 16 && (in_depth == 16 || + !pm->calculations_use_input_precision))) + return pm->maxabs16; + else + return pm->maxabs8; +} +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +static double calcerr(PNG_CONST png_modifier *pm, int in_depth, int out_depth) +{ + /* Error in the linear composition arithmetic - only relevant when + * composition actually happens (0 < alpha < 1). + */ + if (pm->assume_16_bit_calculations || (out_depth == 16 && (in_depth == 16 || + !pm->calculations_use_input_precision))) + return pm->maxcalc16; + else + return pm->maxcalc8; +} + +static double pcerr(PNG_CONST png_modifier *pm, int in_depth, int out_depth) +{ + /* Percentage error permitted in the linear values. Note that the specified + * value is a percentage but this routine returns a simple number. + */ + if (pm->assume_16_bit_calculations || (out_depth == 16 && (in_depth == 16 || + !pm->calculations_use_input_precision))) + return pm->maxpc16 * .01; + else + return pm->maxpc8 * .01; +} + +/* Output error - the error in the encoded value. This is determined by the + * digitization of the output so can be +/-0.5 in the actual output value. In + * the expand_16 case with the current code in libpng the expand happens after + * all the calculations are done in 8 bit arithmetic, so even though the output + * depth is 16 the output error is determined by the 8 bit calculation. + * + * This limit is not determined by the bit depth of internal calculations. + * + * The specified parameter does *not* include the base .5 digitization error but + * it is added here. + */ +static double outerr(PNG_CONST png_modifier *pm, int in_depth, int out_depth) +{ + /* There is a serious error in the 2 and 4 bit grayscale transform because + * the gamma table value (8 bits) is simply shifted, not rounded, so the + * error in 4 bit grayscale gamma is up to the value below. This is a hack + * to allow pngvalid to succeed: + * + * TODO: fix this in libpng + */ + if (out_depth == 2) + return .73182-.5; + + if (out_depth == 4) + return .90644-.5; + + if (out_depth == 16 && (in_depth == 16 || + !pm->calculations_use_input_precision)) + return pm->maxout16; + + /* This is the case where the value was calculated at 8-bit precision then + * scaled to 16 bits. + */ + else if (out_depth == 16) + return pm->maxout8 * 257; + + else + return pm->maxout8; +} + +/* This does the same thing as the above however it returns the value to log, + * rather than raising a warning. This is useful for debugging to track down + * exactly what set of parameters cause high error values. + */ +static double outlog(PNG_CONST png_modifier *pm, int in_depth, int out_depth) +{ + /* The command line parameters are either 8 bit (0..255) or 16 bit (0..65535) + * and so must be adjusted for low bit depth grayscale: + */ + if (out_depth <= 8) + { + if (pm->log8 == 0) /* switched off */ + return 256; + + if (out_depth < 8) + return pm->log8 / 255 * ((1<log8; + } + + if (out_depth == 16 && (in_depth == 16 || + !pm->calculations_use_input_precision)) + { + if (pm->log16 == 0) + return 65536; + + return pm->log16; + } + + /* This is the case where the value was calculated at 8-bit precision then + * scaled to 16 bits. + */ + if (pm->log8 == 0) + return 65536; + + return pm->log8 * 257; +} + +/* This complements the above by providing the appropriate quantization for the + * final value. Normally this would just be quantization to an integral value, + * but in the 8 bit calculation case it's actually quantization to a multiple of + * 257! + */ +static int output_quantization_factor(PNG_CONST png_modifier *pm, int in_depth, + int out_depth) +{ + if (out_depth == 16 && in_depth != 16 + && pm->calculations_use_input_precision) + return 257; + else + return 1; +} +#endif /* PNG_READ_GAMMA_SUPPORTED */ + +/* One modification structure must be provided for each chunk to be modified (in + * fact more than one can be provided if multiple separate changes are desired + * for a single chunk.) Modifications include adding a new chunk when a + * suitable chunk does not exist. + * + * The caller of modify_fn will reset the CRC of the chunk and record 'modified' + * or 'added' as appropriate if the modify_fn returns 1 (true). If the + * modify_fn is NULL the chunk is simply removed. + */ +typedef struct png_modification +{ + struct png_modification *next; + png_uint_32 chunk; + + /* If the following is NULL all matching chunks will be removed: */ + int (*modify_fn)(struct png_modifier *pm, + struct png_modification *me, int add); + + /* If the following is set to PLTE, IDAT or IEND and the chunk has not been + * found and modified (and there is a modify_fn) the modify_fn will be called + * to add the chunk before the relevant chunk. + */ + png_uint_32 add; + unsigned int modified :1; /* Chunk was modified */ + unsigned int added :1; /* Chunk was added */ + unsigned int removed :1; /* Chunk was removed */ +} png_modification; + +static void +modification_reset(png_modification *pmm) +{ + if (pmm != NULL) + { + pmm->modified = 0; + pmm->added = 0; + pmm->removed = 0; + modification_reset(pmm->next); + } +} + +static void +modification_init(png_modification *pmm) +{ + memset(pmm, 0, sizeof *pmm); + pmm->next = NULL; + pmm->chunk = 0; + pmm->modify_fn = NULL; + pmm->add = 0; + modification_reset(pmm); +} + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +static void +modifier_current_encoding(PNG_CONST png_modifier *pm, color_encoding *ce) +{ + if (pm->current_encoding != 0) + *ce = *pm->current_encoding; + + else + memset(ce, 0, sizeof *ce); + + ce->gamma = pm->current_gamma; +} +#endif + +static size_t +safecat_current_encoding(char *buffer, size_t bufsize, size_t pos, + PNG_CONST png_modifier *pm) +{ + pos = safecat_color_encoding(buffer, bufsize, pos, pm->current_encoding, + pm->current_gamma); + + if (pm->encoding_ignored) + pos = safecat(buffer, bufsize, pos, "[overridden]"); + + return pos; +} + +/* Iterate through the usefully testable color encodings. An encoding is one + * of: + * + * 1) Nothing (no color space, no gamma). + * 2) Just a gamma value from the gamma array (including 1.0) + * 3) A color space from the encodings array with the corresponding gamma. + * 4) The same, but with gamma 1.0 (only really useful with 16 bit calculations) + * + * The iterator selects these in turn, the randomizer selects one at random, + * which is used depends on the setting of the 'test_exhaustive' flag. Notice + * that this function changes the colour space encoding so it must only be + * called on completion of the previous test. This is what 'modifier_reset' + * does, below. + * + * After the function has been called the 'repeat' flag will still be set; the + * caller of modifier_reset must reset it at the start of each run of the test! + */ +static unsigned int +modifier_total_encodings(PNG_CONST png_modifier *pm) +{ + return 1 + /* (1) nothing */ + pm->ngammas + /* (2) gamma values to test */ + pm->nencodings + /* (3) total number of encodings */ + /* The following test only works after the first time through the + * png_modifier code because 'bit_depth' is set when the IHDR is read. + * modifier_reset, below, preserves the setting until after it has called + * the iterate function (also below.) + * + * For this reason do not rely on this function outside a call to + * modifier_reset. + */ + ((pm->bit_depth == 16 || pm->assume_16_bit_calculations) ? + pm->nencodings : 0); /* (4) encodings with gamma == 1.0 */ +} + +static void +modifier_encoding_iterate(png_modifier *pm) +{ + if (!pm->repeat && /* Else something needs the current encoding again. */ + pm->test_uses_encoding) /* Some transform is encoding dependent */ + { + if (pm->test_exhaustive) + { + if (++pm->encoding_counter >= modifier_total_encodings(pm)) + pm->encoding_counter = 0; /* This will stop the repeat */ + } + + else + { + /* Not exhaustive - choose an encoding at random; generate a number in + * the range 1..(max-1), so the result is always non-zero: + */ + if (pm->encoding_counter == 0) + pm->encoding_counter = random_mod(modifier_total_encodings(pm)-1)+1; + else + pm->encoding_counter = 0; + } + + if (pm->encoding_counter > 0) + pm->repeat = 1; + } + + else if (!pm->repeat) + pm->encoding_counter = 0; +} + +static void +modifier_reset(png_modifier *pm) +{ + store_read_reset(&pm->this); + pm->limit = 4E-3; + pm->pending_len = pm->pending_chunk = 0; + pm->flush = pm->buffer_count = pm->buffer_position = 0; + pm->modifications = NULL; + pm->state = modifier_start; + modifier_encoding_iterate(pm); + /* The following must be set in the next run. In particular + * test_uses_encodings must be set in the _ini function of each transform + * that looks at the encodings. (Not the 'add' function!) + */ + pm->test_uses_encoding = 0; + pm->current_gamma = 0; + pm->current_encoding = 0; + pm->encoding_ignored = 0; + /* These only become value after IHDR is read: */ + pm->bit_depth = pm->colour_type = 0; +} + +/* The following must be called before anything else to get the encoding set up + * on the modifier. In particular it must be called before the transform init + * functions are called. + */ +static void +modifier_set_encoding(png_modifier *pm) +{ + /* Set the encoding to the one specified by the current encoding counter, + * first clear out all the settings - this corresponds to an encoding_counter + * of 0. + */ + pm->current_gamma = 0; + pm->current_encoding = 0; + pm->encoding_ignored = 0; /* not ignored yet - happens in _ini functions. */ + + /* Now, if required, set the gamma and encoding fields. */ + if (pm->encoding_counter > 0) + { + /* The gammas[] array is an array of screen gammas, not encoding gammas, + * so we need the inverse: + */ + if (pm->encoding_counter <= pm->ngammas) + pm->current_gamma = 1/pm->gammas[pm->encoding_counter-1]; + + else + { + unsigned int i = pm->encoding_counter - pm->ngammas; + + if (i >= pm->nencodings) + { + i %= pm->nencodings; + pm->current_gamma = 1; /* Linear, only in the 16 bit case */ + } + + else + pm->current_gamma = pm->encodings[i].gamma; + + pm->current_encoding = pm->encodings + i; + } + } +} + +/* Enquiry functions to find out what is set. Notice that there is an implicit + * assumption below that the first encoding in the list is the one for sRGB. + */ +static int +modifier_color_encoding_is_sRGB(PNG_CONST png_modifier *pm) +{ + return pm->current_encoding != 0 && pm->current_encoding == pm->encodings && + pm->current_encoding->gamma == pm->current_gamma; +} + +static int +modifier_color_encoding_is_set(PNG_CONST png_modifier *pm) +{ + return pm->current_gamma != 0; +} + +/* Convenience macros. */ +#define CHUNK(a,b,c,d) (((a)<<24)+((b)<<16)+((c)<<8)+(d)) +#define CHUNK_IHDR CHUNK(73,72,68,82) +#define CHUNK_PLTE CHUNK(80,76,84,69) +#define CHUNK_IDAT CHUNK(73,68,65,84) +#define CHUNK_IEND CHUNK(73,69,78,68) +#define CHUNK_cHRM CHUNK(99,72,82,77) +#define CHUNK_gAMA CHUNK(103,65,77,65) +#define CHUNK_sBIT CHUNK(115,66,73,84) +#define CHUNK_sRGB CHUNK(115,82,71,66) + +/* The guts of modification are performed during a read. */ +static void +modifier_crc(png_bytep buffer) +{ + /* Recalculate the chunk CRC - a complete chunk must be in + * the buffer, at the start. + */ + uInt datalen = png_get_uint_32(buffer); + uLong crc = crc32(0, buffer+4, datalen+4); + /* The cast to png_uint_32 is safe because a crc32 is always a 32 bit value. + */ + png_save_uint_32(buffer+datalen+8, (png_uint_32)crc); +} + +static void +modifier_setbuffer(png_modifier *pm) +{ + modifier_crc(pm->buffer); + pm->buffer_count = png_get_uint_32(pm->buffer)+12; + pm->buffer_position = 0; +} + +/* Separate the callback into the actual implementation (which is passed the + * png_modifier explicitly) and the callback, which gets the modifier from the + * png_struct. + */ +static void +modifier_read_imp(png_modifier *pm, png_bytep pb, png_size_t st) +{ + while (st > 0) + { + size_t cb; + png_uint_32 len, chunk; + png_modification *mod; + + if (pm->buffer_position >= pm->buffer_count) switch (pm->state) + { + static png_byte sign[8] = { 137, 80, 78, 71, 13, 10, 26, 10 }; + case modifier_start: + store_read_imp(&pm->this, pm->buffer, 8); /* size of signature. */ + pm->buffer_count = 8; + pm->buffer_position = 0; + + if (memcmp(pm->buffer, sign, 8) != 0) + png_error(pm->this.pread, "invalid PNG file signature"); + pm->state = modifier_signature; + break; + + case modifier_signature: + store_read_imp(&pm->this, pm->buffer, 13+12); /* size of IHDR */ + pm->buffer_count = 13+12; + pm->buffer_position = 0; + + if (png_get_uint_32(pm->buffer) != 13 || + png_get_uint_32(pm->buffer+4) != CHUNK_IHDR) + png_error(pm->this.pread, "invalid IHDR"); + + /* Check the list of modifiers for modifications to the IHDR. */ + mod = pm->modifications; + while (mod != NULL) + { + if (mod->chunk == CHUNK_IHDR && mod->modify_fn && + (*mod->modify_fn)(pm, mod, 0)) + { + mod->modified = 1; + modifier_setbuffer(pm); + } + + /* Ignore removal or add if IHDR! */ + mod = mod->next; + } + + /* Cache information from the IHDR (the modified one.) */ + pm->bit_depth = pm->buffer[8+8]; + pm->colour_type = pm->buffer[8+8+1]; + + pm->state = modifier_IHDR; + pm->flush = 0; + break; + + case modifier_IHDR: + default: + /* Read a new chunk and process it until we see PLTE, IDAT or + * IEND. 'flush' indicates that there is still some data to + * output from the preceding chunk. + */ + if ((cb = pm->flush) > 0) + { + if (cb > st) cb = st; + pm->flush -= cb; + store_read_imp(&pm->this, pb, cb); + pb += cb; + st -= cb; + if (st == 0) return; + } + + /* No more bytes to flush, read a header, or handle a pending + * chunk. + */ + if (pm->pending_chunk != 0) + { + png_save_uint_32(pm->buffer, pm->pending_len); + png_save_uint_32(pm->buffer+4, pm->pending_chunk); + pm->pending_len = 0; + pm->pending_chunk = 0; + } + else + store_read_imp(&pm->this, pm->buffer, 8); + + pm->buffer_count = 8; + pm->buffer_position = 0; + + /* Check for something to modify or a terminator chunk. */ + len = png_get_uint_32(pm->buffer); + chunk = png_get_uint_32(pm->buffer+4); + + /* Terminators first, they may have to be delayed for added + * chunks + */ + if (chunk == CHUNK_PLTE || chunk == CHUNK_IDAT || + chunk == CHUNK_IEND) + { + mod = pm->modifications; + + while (mod != NULL) + { + if ((mod->add == chunk || + (mod->add == CHUNK_PLTE && chunk == CHUNK_IDAT)) && + mod->modify_fn != NULL && !mod->modified && !mod->added) + { + /* Regardless of what the modify function does do not run + * this again. + */ + mod->added = 1; + + if ((*mod->modify_fn)(pm, mod, 1 /*add*/)) + { + /* Reset the CRC on a new chunk */ + if (pm->buffer_count > 0) + modifier_setbuffer(pm); + + else + { + pm->buffer_position = 0; + mod->removed = 1; + } + + /* The buffer has been filled with something (we assume) + * so output this. Pend the current chunk. + */ + pm->pending_len = len; + pm->pending_chunk = chunk; + break; /* out of while */ + } + } + + mod = mod->next; + } + + /* Don't do any further processing if the buffer was modified - + * otherwise the code will end up modifying a chunk that was + * just added. + */ + if (mod != NULL) + break; /* out of switch */ + } + + /* If we get to here then this chunk may need to be modified. To + * do this it must be less than 1024 bytes in total size, otherwise + * it just gets flushed. + */ + if (len+12 <= sizeof pm->buffer) + { + store_read_imp(&pm->this, pm->buffer+pm->buffer_count, + len+12-pm->buffer_count); + pm->buffer_count = len+12; + + /* Check for a modification, else leave it be. */ + mod = pm->modifications; + while (mod != NULL) + { + if (mod->chunk == chunk) + { + if (mod->modify_fn == NULL) + { + /* Remove this chunk */ + pm->buffer_count = pm->buffer_position = 0; + mod->removed = 1; + break; /* Terminate the while loop */ + } + + else if ((*mod->modify_fn)(pm, mod, 0)) + { + mod->modified = 1; + /* The chunk may have been removed: */ + if (pm->buffer_count == 0) + { + pm->buffer_position = 0; + break; + } + modifier_setbuffer(pm); + } + } + + mod = mod->next; + } + } + + else + pm->flush = len+12 - pm->buffer_count; /* data + crc */ + + /* Take the data from the buffer (if there is any). */ + break; + } + + /* Here to read from the modifier buffer (not directly from + * the store, as in the flush case above.) + */ + cb = pm->buffer_count - pm->buffer_position; + + if (cb > st) + cb = st; + + memcpy(pb, pm->buffer + pm->buffer_position, cb); + st -= cb; + pb += cb; + pm->buffer_position += cb; + } +} + +/* The callback: */ +static void +modifier_read(png_structp ppIn, png_bytep pb, png_size_t st) +{ + png_const_structp pp = ppIn; + png_modifier *pm = voidcast(png_modifier*, png_get_io_ptr(pp)); + + if (pm == NULL || pm->this.pread != pp) + png_error(pp, "bad modifier_read call"); + + modifier_read_imp(pm, pb, st); +} + +/* Like store_progressive_read but the data is getting changed as we go so we + * need a local buffer. + */ +static void +modifier_progressive_read(png_modifier *pm, png_structp pp, png_infop pi) +{ + if (pm->this.pread != pp || pm->this.current == NULL || + pm->this.next == NULL) + png_error(pp, "store state damaged (progressive)"); + + /* This is another Horowitz and Hill random noise generator. In this case + * the aim is to stress the progressive reader with truly horrible variable + * buffer sizes in the range 1..500, so a sequence of 9 bit random numbers + * is generated. We could probably just count from 1 to 32767 and get as + * good a result. + */ + for (;;) + { + static png_uint_32 noise = 1; + png_size_t cb, cbAvail; + png_byte buffer[512]; + + /* Generate 15 more bits of stuff: */ + noise = (noise << 9) | ((noise ^ (noise >> (9-5))) & 0x1ff); + cb = noise & 0x1ff; + + /* Check that this number of bytes are available (in the current buffer.) + * (This doesn't quite work - the modifier might delete a chunk; unlikely + * but possible, it doesn't happen at present because the modifier only + * adds chunks to standard images.) + */ + cbAvail = store_read_buffer_avail(&pm->this); + if (pm->buffer_count > pm->buffer_position) + cbAvail += pm->buffer_count - pm->buffer_position; + + if (cb > cbAvail) + { + /* Check for EOF: */ + if (cbAvail == 0) + break; + + cb = cbAvail; + } + + modifier_read_imp(pm, buffer, cb); + png_process_data(pp, pi, buffer, cb); + } + + /* Check the invariants at the end (if this fails it's a problem in this + * file!) + */ + if (pm->buffer_count > pm->buffer_position || + pm->this.next != &pm->this.current->data || + pm->this.readpos < pm->this.current->datacount) + png_error(pp, "progressive read implementation error"); +} + +/* Set up a modifier. */ +static png_structp +set_modifier_for_read(png_modifier *pm, png_infopp ppi, png_uint_32 id, + PNG_CONST char *name) +{ + /* Do this first so that the modifier fields are cleared even if an error + * happens allocating the png_struct. No allocation is done here so no + * cleanup is required. + */ + pm->state = modifier_start; + pm->bit_depth = 0; + pm->colour_type = 255; + + pm->pending_len = 0; + pm->pending_chunk = 0; + pm->flush = 0; + pm->buffer_count = 0; + pm->buffer_position = 0; + + return set_store_for_read(&pm->this, ppi, id, name); +} + + +/******************************** MODIFICATIONS *******************************/ +/* Standard modifications to add chunks. These do not require the _SUPPORTED + * macros because the chunks can be there regardless of whether this specific + * libpng supports them. + */ +typedef struct gama_modification +{ + png_modification this; + png_fixed_point gamma; +} gama_modification; + +static int +gama_modify(png_modifier *pm, png_modification *me, int add) +{ + UNUSED(add) + /* This simply dumps the given gamma value into the buffer. */ + png_save_uint_32(pm->buffer, 4); + png_save_uint_32(pm->buffer+4, CHUNK_gAMA); + png_save_uint_32(pm->buffer+8, ((gama_modification*)me)->gamma); + return 1; +} + +static void +gama_modification_init(gama_modification *me, png_modifier *pm, double gammad) +{ + double g; + + modification_init(&me->this); + me->this.chunk = CHUNK_gAMA; + me->this.modify_fn = gama_modify; + me->this.add = CHUNK_PLTE; + g = fix(gammad); + me->gamma = (png_fixed_point)g; + me->this.next = pm->modifications; + pm->modifications = &me->this; +} + +typedef struct chrm_modification +{ + png_modification this; + PNG_CONST color_encoding *encoding; + png_fixed_point wx, wy, rx, ry, gx, gy, bx, by; +} chrm_modification; + +static int +chrm_modify(png_modifier *pm, png_modification *me, int add) +{ + UNUSED(add) + /* As with gAMA this just adds the required cHRM chunk to the buffer. */ + png_save_uint_32(pm->buffer , 32); + png_save_uint_32(pm->buffer+ 4, CHUNK_cHRM); + png_save_uint_32(pm->buffer+ 8, ((chrm_modification*)me)->wx); + png_save_uint_32(pm->buffer+12, ((chrm_modification*)me)->wy); + png_save_uint_32(pm->buffer+16, ((chrm_modification*)me)->rx); + png_save_uint_32(pm->buffer+20, ((chrm_modification*)me)->ry); + png_save_uint_32(pm->buffer+24, ((chrm_modification*)me)->gx); + png_save_uint_32(pm->buffer+28, ((chrm_modification*)me)->gy); + png_save_uint_32(pm->buffer+32, ((chrm_modification*)me)->bx); + png_save_uint_32(pm->buffer+36, ((chrm_modification*)me)->by); + return 1; +} + +static void +chrm_modification_init(chrm_modification *me, png_modifier *pm, + PNG_CONST color_encoding *encoding) +{ + CIE_color white = white_point(encoding); + + /* Original end points: */ + me->encoding = encoding; + + /* Chromaticities (in fixed point): */ + me->wx = fix(chromaticity_x(white)); + me->wy = fix(chromaticity_y(white)); + + me->rx = fix(chromaticity_x(encoding->red)); + me->ry = fix(chromaticity_y(encoding->red)); + me->gx = fix(chromaticity_x(encoding->green)); + me->gy = fix(chromaticity_y(encoding->green)); + me->bx = fix(chromaticity_x(encoding->blue)); + me->by = fix(chromaticity_y(encoding->blue)); + + modification_init(&me->this); + me->this.chunk = CHUNK_cHRM; + me->this.modify_fn = chrm_modify; + me->this.add = CHUNK_PLTE; + me->this.next = pm->modifications; + pm->modifications = &me->this; +} + +typedef struct srgb_modification +{ + png_modification this; + png_byte intent; +} srgb_modification; + +static int +srgb_modify(png_modifier *pm, png_modification *me, int add) +{ + UNUSED(add) + /* As above, ignore add and just make a new chunk */ + png_save_uint_32(pm->buffer, 1); + png_save_uint_32(pm->buffer+4, CHUNK_sRGB); + pm->buffer[8] = ((srgb_modification*)me)->intent; + return 1; +} + +static void +srgb_modification_init(srgb_modification *me, png_modifier *pm, png_byte intent) +{ + modification_init(&me->this); + me->this.chunk = CHUNK_sBIT; + + if (intent <= 3) /* if valid, else *delete* sRGB chunks */ + { + me->this.modify_fn = srgb_modify; + me->this.add = CHUNK_PLTE; + me->intent = intent; + } + + else + { + me->this.modify_fn = 0; + me->this.add = 0; + me->intent = 0; + } + + me->this.next = pm->modifications; + pm->modifications = &me->this; +} + +#ifdef PNG_READ_GAMMA_SUPPORTED +typedef struct sbit_modification +{ + png_modification this; + png_byte sbit; +} sbit_modification; + +static int +sbit_modify(png_modifier *pm, png_modification *me, int add) +{ + png_byte sbit = ((sbit_modification*)me)->sbit; + if (pm->bit_depth > sbit) + { + int cb = 0; + switch (pm->colour_type) + { + case 0: + cb = 1; + break; + + case 2: + case 3: + cb = 3; + break; + + case 4: + cb = 2; + break; + + case 6: + cb = 4; + break; + + default: + png_error(pm->this.pread, + "unexpected colour type in sBIT modification"); + } + + png_save_uint_32(pm->buffer, cb); + png_save_uint_32(pm->buffer+4, CHUNK_sBIT); + + while (cb > 0) + (pm->buffer+8)[--cb] = sbit; + + return 1; + } + else if (!add) + { + /* Remove the sBIT chunk */ + pm->buffer_count = pm->buffer_position = 0; + return 1; + } + else + return 0; /* do nothing */ +} + +static void +sbit_modification_init(sbit_modification *me, png_modifier *pm, png_byte sbit) +{ + modification_init(&me->this); + me->this.chunk = CHUNK_sBIT; + me->this.modify_fn = sbit_modify; + me->this.add = CHUNK_PLTE; + me->sbit = sbit; + me->this.next = pm->modifications; + pm->modifications = &me->this; +} +#endif /* PNG_READ_GAMMA_SUPPORTED */ +#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ + +/***************************** STANDARD PNG FILES *****************************/ +/* Standard files - write and save standard files. */ +/* There are two basic forms of standard images. Those which attempt to have + * all the possible pixel values (not possible for 16bpp images, but a range of + * values are produced) and those which have a range of image sizes. The former + * are used for testing transforms, in particular gamma correction and bit + * reduction and increase. The latter are reserved for testing the behavior of + * libpng with respect to 'odd' image sizes - particularly small images where + * rows become 1 byte and interlace passes disappear. + * + * The first, most useful, set are the 'transform' images, the second set of + * small images are the 'size' images. + * + * The transform files are constructed with rows which fit into a 1024 byte row + * buffer. This makes allocation easier below. Further regardless of the file + * format every row has 128 pixels (giving 1024 bytes for 64bpp formats). + * + * Files are stored with no gAMA or sBIT chunks, with a PLTE only when needed + * and with an ID derived from the colour type, bit depth and interlace type + * as above (FILEID). The width (128) and height (variable) are not stored in + * the FILEID - instead the fields are set to 0, indicating a transform file. + * + * The size files ar constructed with rows a maximum of 128 bytes wide, allowing + * a maximum width of 16 pixels (for the 64bpp case.) They also have a maximum + * height of 16 rows. The width and height are stored in the FILEID and, being + * non-zero, indicate a size file. + * + * For palette image (colour type 3) multiple transform images are stored with + * the same bit depth to allow testing of more colour combinations - + * particularly important for testing the gamma code because libpng uses a + * different code path for palette images. For size images a single palette is + * used. + */ + +/* Make a 'standard' palette. Because there are only 256 entries in a palette + * (maximum) this actually makes a random palette in the hope that enough tests + * will catch enough errors. (Note that the same palette isn't produced every + * time for the same test - it depends on what previous tests have been run - + * but a given set of arguments to pngvalid will always produce the same palette + * at the same test! This is why pseudo-random number generators are useful for + * testing.) + * + * The store must be open for write when this is called, otherwise an internal + * error will occur. This routine contains its own magic number seed, so the + * palettes generated don't change if there are intervening errors (changing the + * calls to the store_mark seed.) + */ +static store_palette_entry * +make_standard_palette(png_store* ps, int npalette, int do_tRNS) +{ + static png_uint_32 palette_seed[2] = { 0x87654321, 9 }; + + int i = 0; + png_byte values[256][4]; + + /* Always put in black and white plus the six primary and secondary colors. + */ + for (; i<8; ++i) + { + values[i][1] = (png_byte)((i&1) ? 255U : 0U); + values[i][2] = (png_byte)((i&2) ? 255U : 0U); + values[i][3] = (png_byte)((i&4) ? 255U : 0U); + } + + /* Then add 62 grays (one quarter of the remaining 256 slots). */ + { + int j = 0; + png_byte random_bytes[4]; + png_byte need[256]; + + need[0] = 0; /*got black*/ + memset(need+1, 1, (sizeof need)-2); /*need these*/ + need[255] = 0; /*but not white*/ + + while (i<70) + { + png_byte b; + + if (j==0) + { + make_four_random_bytes(palette_seed, random_bytes); + j = 4; + } + + b = random_bytes[--j]; + if (need[b]) + { + values[i][1] = b; + values[i][2] = b; + values[i++][3] = b; + } + } + } + + /* Finally add 192 colors at random - don't worry about matches to things we + * already have, chance is less than 1/65536. Don't worry about grays, + * chance is the same, so we get a duplicate or extra gray less than 1 time + * in 170. + */ + for (; i<256; ++i) + make_four_random_bytes(palette_seed, values[i]); + + /* Fill in the alpha values in the first byte. Just use all possible values + * (0..255) in an apparently random order: + */ + { + store_palette_entry *palette; + png_byte selector[4]; + + make_four_random_bytes(palette_seed, selector); + + if (do_tRNS) + for (i=0; i<256; ++i) + values[i][0] = (png_byte)(i ^ selector[0]); + + else + for (i=0; i<256; ++i) + values[i][0] = 255; /* no transparency/tRNS chunk */ + + /* 'values' contains 256 ARGB values, but we only need 'npalette'. + * 'npalette' will always be a power of 2: 2, 4, 16 or 256. In the low + * bit depth cases select colors at random, else it is difficult to have + * a set of low bit depth palette test with any chance of a reasonable + * range of colors. Do this by randomly permuting values into the low + * 'npalette' entries using an XOR mask generated here. This also + * permutes the npalette == 256 case in a potentially useful way (there is + * no relationship between palette index and the color value therein!) + */ + palette = store_write_palette(ps, npalette); + + for (i=0; i 0) + png_set_tRNS(pp, pi, tRNS, j, 0/*color*/); + } +} + +/* The number of passes is related to the interlace type. There was no libpng + * API to determine this prior to 1.5, so we need an inquiry function: + */ +static int +npasses_from_interlace_type(png_const_structp pp, int interlace_type) +{ + switch (interlace_type) + { + default: + png_error(pp, "invalid interlace type"); + + case PNG_INTERLACE_NONE: + return 1; + + case PNG_INTERLACE_ADAM7: + return PNG_INTERLACE_ADAM7_PASSES; + } +} + +static unsigned int +bit_size(png_const_structp pp, png_byte colour_type, png_byte bit_depth) +{ + switch (colour_type) + { + default: png_error(pp, "invalid color type"); + + case 0: return bit_depth; + + case 2: return 3*bit_depth; + + case 3: return bit_depth; + + case 4: return 2*bit_depth; + + case 6: return 4*bit_depth; + } +} + +#define TRANSFORM_WIDTH 128U +#define TRANSFORM_ROWMAX (TRANSFORM_WIDTH*8U) +#define SIZE_ROWMAX (16*8U) /* 16 pixels, max 8 bytes each - 128 bytes */ +#define STANDARD_ROWMAX TRANSFORM_ROWMAX /* The larger of the two */ +#define SIZE_HEIGHTMAX 16 /* Maximum range of size images */ + +static size_t +transform_rowsize(png_const_structp pp, png_byte colour_type, + png_byte bit_depth) +{ + return (TRANSFORM_WIDTH * bit_size(pp, colour_type, bit_depth)) / 8; +} + +/* transform_width(pp, colour_type, bit_depth) current returns the same number + * every time, so just use a macro: + */ +#define transform_width(pp, colour_type, bit_depth) TRANSFORM_WIDTH + +static png_uint_32 +transform_height(png_const_structp pp, png_byte colour_type, png_byte bit_depth) +{ + switch (bit_size(pp, colour_type, bit_depth)) + { + case 1: + case 2: + case 4: + return 1; /* Total of 128 pixels */ + + case 8: + return 2; /* Total of 256 pixels/bytes */ + + case 16: + return 512; /* Total of 65536 pixels */ + + case 24: + case 32: + return 512; /* 65536 pixels */ + + case 48: + case 64: + return 2048;/* 4 x 65536 pixels. */ +# define TRANSFORM_HEIGHTMAX 2048 + + default: + return 0; /* Error, will be caught later */ + } +} + +#ifdef PNG_READ_SUPPORTED +/* The following can only be defined here, now we have the definitions + * of the transform image sizes. + */ +static png_uint_32 +standard_width(png_const_structp pp, png_uint_32 id) +{ + png_uint_32 width = WIDTH_FROM_ID(id); + UNUSED(pp) + + if (width == 0) + width = transform_width(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); + + return width; +} + +static png_uint_32 +standard_height(png_const_structp pp, png_uint_32 id) +{ + png_uint_32 height = HEIGHT_FROM_ID(id); + + if (height == 0) + height = transform_height(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); + + return height; +} + +static png_uint_32 +standard_rowsize(png_const_structp pp, png_uint_32 id) +{ + png_uint_32 width = standard_width(pp, id); + + /* This won't overflow: */ + width *= bit_size(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); + return (width + 7) / 8; +} +#endif /* PNG_READ_SUPPORTED */ + +static void +transform_row(png_const_structp pp, png_byte buffer[TRANSFORM_ROWMAX], + png_byte colour_type, png_byte bit_depth, png_uint_32 y) +{ + png_uint_32 v = y << 7; + png_uint_32 i = 0; + + switch (bit_size(pp, colour_type, bit_depth)) + { + case 1: + while (i<128/8) buffer[i] = (png_byte)(v & 0xff), v += 17, ++i; + return; + + case 2: + while (i<128/4) buffer[i] = (png_byte)(v & 0xff), v += 33, ++i; + return; + + case 4: + while (i<128/2) buffer[i] = (png_byte)(v & 0xff), v += 65, ++i; + return; + + case 8: + /* 256 bytes total, 128 bytes in each row set as follows: */ + while (i<128) buffer[i] = (png_byte)(v & 0xff), ++v, ++i; + return; + + case 16: + /* Generate all 65536 pixel values in order, which includes the 8 bit + * GA case as well as the 16 bit G case. + */ + while (i<128) + { + buffer[2*i] = (png_byte)((v>>8) & 0xff); + buffer[2*i+1] = (png_byte)(v & 0xff); + ++v; + ++i; + } + + return; + + case 24: + /* 65535 pixels, but rotate the values. */ + while (i<128) + { + /* Three bytes per pixel, r, g, b, make b by r^g */ + buffer[3*i+0] = (png_byte)((v >> 8) & 0xff); + buffer[3*i+1] = (png_byte)(v & 0xff); + buffer[3*i+2] = (png_byte)(((v >> 8) ^ v) & 0xff); + ++v; + ++i; + } + + return; + + case 32: + /* 65535 pixels, r, g, b, a; just replicate */ + while (i<128) + { + buffer[4*i+0] = (png_byte)((v >> 8) & 0xff); + buffer[4*i+1] = (png_byte)(v & 0xff); + buffer[4*i+2] = (png_byte)((v >> 8) & 0xff); + buffer[4*i+3] = (png_byte)(v & 0xff); + ++v; + ++i; + } + + return; + + case 48: + /* y is maximum 2047, giving 4x65536 pixels, make 'r' increase by 1 at + * each pixel, g increase by 257 (0x101) and 'b' by 0x1111: + */ + while (i<128) + { + png_uint_32 t = v++; + buffer[6*i+0] = (png_byte)((t >> 8) & 0xff); + buffer[6*i+1] = (png_byte)(t & 0xff); + t *= 257; + buffer[6*i+2] = (png_byte)((t >> 8) & 0xff); + buffer[6*i+3] = (png_byte)(t & 0xff); + t *= 17; + buffer[6*i+4] = (png_byte)((t >> 8) & 0xff); + buffer[6*i+5] = (png_byte)(t & 0xff); + ++i; + } + + return; + + case 64: + /* As above in the 32 bit case. */ + while (i<128) + { + png_uint_32 t = v++; + buffer[8*i+0] = (png_byte)((t >> 8) & 0xff); + buffer[8*i+1] = (png_byte)(t & 0xff); + buffer[8*i+4] = (png_byte)((t >> 8) & 0xff); + buffer[8*i+5] = (png_byte)(t & 0xff); + t *= 257; + buffer[8*i+2] = (png_byte)((t >> 8) & 0xff); + buffer[8*i+3] = (png_byte)(t & 0xff); + buffer[8*i+6] = (png_byte)((t >> 8) & 0xff); + buffer[8*i+7] = (png_byte)(t & 0xff); + ++i; + } + return; + + default: + break; + } + + png_error(pp, "internal error"); +} + +/* This is just to do the right cast - could be changed to a function to check + * 'bd' but there isn't much point. + */ +#define DEPTH(bd) ((png_byte)(1U << (bd))) + +/* Make a standardized image given a an image colour type, bit depth and + * interlace type. The standard images have a very restricted range of + * rows and heights and are used for testing transforms rather than image + * layout details. See make_size_images below for a way to make images + * that test odd sizes along with the libpng interlace handling. + */ +static void +make_transform_image(png_store* PNG_CONST ps, png_byte PNG_CONST colour_type, + png_byte PNG_CONST bit_depth, unsigned int palette_number, + int interlace_type, png_const_charp name) +{ + context(ps, fault); + + Try + { + png_infop pi; + png_structp pp = set_store_for_write(ps, &pi, name); + png_uint_32 h; + + /* In the event of a problem return control to the Catch statement below + * to do the clean up - it is not possible to 'return' directly from a Try + * block. + */ + if (pp == NULL) + Throw ps; + + h = transform_height(pp, colour_type, bit_depth); + + png_set_IHDR(pp, pi, transform_width(pp, colour_type, bit_depth), h, + bit_depth, colour_type, interlace_type, + PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + +#ifdef PNG_TEXT_SUPPORTED +# if defined(PNG_READ_zTXt_SUPPORTED) && defined(PNG_WRITE_zTXt_SUPPORTED) +# define TEXT_COMPRESSION PNG_TEXT_COMPRESSION_zTXt +# else +# define TEXT_COMPRESSION PNG_TEXT_COMPRESSION_NONE +# endif + { + static char key[] = "image name"; /* must be writeable */ + size_t pos; + png_text text; + char copy[FILE_NAME_SIZE]; + + /* Use a compressed text string to test the correct interaction of text + * compression and IDAT compression. + */ + text.compression = TEXT_COMPRESSION; + text.key = key; + /* Yuck: the text must be writable! */ + pos = safecat(copy, sizeof copy, 0, ps->wname); + text.text = copy; + text.text_length = pos; + text.itxt_length = 0; + text.lang = 0; + text.lang_key = 0; + + png_set_text(pp, pi, &text, 1); + } +#endif + + if (colour_type == 3) /* palette */ + init_standard_palette(ps, pp, pi, 1U << bit_depth, 1/*do tRNS*/); + + png_write_info(pp, pi); + + if (png_get_rowbytes(pp, pi) != + transform_rowsize(pp, colour_type, bit_depth)) + png_error(pp, "row size incorrect"); + + else + { + /* Somewhat confusingly this must be called *after* png_write_info + * because if it is called before, the information in *pp has not been + * updated to reflect the interlaced image. + */ + int npasses = png_set_interlace_handling(pp); + int pass; + + if (npasses != npasses_from_interlace_type(pp, interlace_type)) + png_error(pp, "write: png_set_interlace_handling failed"); + + for (pass=0; passtest, sizeof ps->test, 0, "make standard images"); + + /* Use next_format to enumerate all the combinations we test, including + * generating multiple low bit depth palette images. + */ + while (next_format(&colour_type, &bit_depth, &palette_number)) + { + int interlace_type; + + for (interlace_type = PNG_INTERLACE_NONE; + interlace_type < PNG_INTERLACE_LAST; ++interlace_type) + { + char name[FILE_NAME_SIZE]; + + standard_name(name, sizeof name, 0, colour_type, bit_depth, + palette_number, interlace_type, 0, 0, 0); + make_transform_image(ps, colour_type, bit_depth, palette_number, + interlace_type, name); + } + } +} + +/* The following two routines use the PNG interlace support macros from + * png.h to interlace or deinterlace rows. + */ +static void +interlace_row(png_bytep buffer, png_const_bytep imageRow, + unsigned int pixel_size, png_uint_32 w, int pass) +{ + png_uint_32 xin, xout, xstep; + + /* Note that this can, trivially, be optimized to a memcpy on pass 7, the + * code is presented this way to make it easier to understand. In practice + * consult the code in the libpng source to see other ways of doing this. + */ + xin = PNG_PASS_START_COL(pass); + xstep = 1U<= 8) + *buffer++ = (png_byte)y++, bit_width -= 8; + + /* There may be up to 7 remaining bits, these go in the most significant + * bits of the byte. + */ + if (bit_width > 0) + { + png_uint_32 mask = (1U<<(8-bit_width))-1; + *buffer = (png_byte)((*buffer & mask) | (y & ~mask)); + } +} + +static void +make_size_image(png_store* PNG_CONST ps, png_byte PNG_CONST colour_type, + png_byte PNG_CONST bit_depth, int PNG_CONST interlace_type, + png_uint_32 PNG_CONST w, png_uint_32 PNG_CONST h, + int PNG_CONST do_interlace) +{ + context(ps, fault); + + Try + { + png_infop pi; + png_structp pp; + unsigned int pixel_size; + + /* Make a name and get an appropriate id for the store: */ + char name[FILE_NAME_SIZE]; + PNG_CONST png_uint_32 id = FILEID(colour_type, bit_depth, 0/*palette*/, + interlace_type, w, h, do_interlace); + + standard_name_from_id(name, sizeof name, 0, id); + pp = set_store_for_write(ps, &pi, name); + + /* In the event of a problem return control to the Catch statement below + * to do the clean up - it is not possible to 'return' directly from a Try + * block. + */ + if (pp == NULL) + Throw ps; + + png_set_IHDR(pp, pi, w, h, bit_depth, colour_type, interlace_type, + PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + +#ifdef PNG_TEXT_SUPPORTED + { + static char key[] = "image name"; /* must be writeable */ + size_t pos; + png_text text; + char copy[FILE_NAME_SIZE]; + + /* Use a compressed text string to test the correct interaction of text + * compression and IDAT compression. + */ + text.compression = TEXT_COMPRESSION; + text.key = key; + /* Yuck: the text must be writable! */ + pos = safecat(copy, sizeof copy, 0, ps->wname); + text.text = copy; + text.text_length = pos; + text.itxt_length = 0; + text.lang = 0; + text.lang_key = 0; + + png_set_text(pp, pi, &text, 1); + } +#endif + + if (colour_type == 3) /* palette */ + init_standard_palette(ps, pp, pi, 1U << bit_depth, 0/*do tRNS*/); + + png_write_info(pp, pi); + + /* Calculate the bit size, divide by 8 to get the byte size - this won't + * overflow because we know the w values are all small enough even for + * a system where 'unsigned int' is only 16 bits. + */ + pixel_size = bit_size(pp, colour_type, bit_depth); + if (png_get_rowbytes(pp, pi) != ((w * pixel_size) + 7) / 8) + png_error(pp, "row size incorrect"); + + else + { + int npasses = npasses_from_interlace_type(pp, interlace_type); + png_uint_32 y; + int pass; + png_byte image[16][SIZE_ROWMAX]; + + /* To help consistent error detection make the parts of this buffer + * that aren't set below all '1': + */ + memset(image, 0xff, sizeof image); + + if (!do_interlace && npasses != png_set_interlace_handling(pp)) + png_error(pp, "write: png_set_interlace_handling failed"); + + /* Prepare the whole image first to avoid making it 7 times: */ + for (y=0; y 0) + { + /* Set to all 1's for error detection (libpng tends to + * set unset things to 0). + */ + memset(tempRow, 0xff, sizeof tempRow); + interlace_row(tempRow, row, pixel_size, w, pass); + row = tempRow; + } + else + continue; + } + + /* Only get to here if the row has some pixels in it. */ + png_write_row(pp, row); + } + } + } + +#ifdef PNG_TEXT_SUPPORTED + { + static char key[] = "end marker"; + static char comment[] = "end"; + png_text text; + + /* Use a compressed text string to test the correct interaction of text + * compression and IDAT compression. + */ + text.compression = TEXT_COMPRESSION; + text.key = key; + text.text = comment; + text.text_length = (sizeof comment)-1; + text.itxt_length = 0; + text.lang = 0; + text.lang_key = 0; + + png_set_text(pp, pi, &text, 1); + } +#endif + + png_write_end(pp, pi); + + /* And store this under the appropriate id, then clean up. */ + store_storefile(ps, id); + + store_write_reset(ps); + } + + Catch(fault) + { + /* Use the png_store returned by the exception. This may help the compiler + * because 'ps' is not used in this branch of the setjmp. Note that fault + * and ps will always be the same value. + */ + store_write_reset(fault); + } +} + +static void +make_size(png_store* PNG_CONST ps, png_byte PNG_CONST colour_type, int bdlo, + int PNG_CONST bdhi) +{ + for (; bdlo <= bdhi; ++bdlo) + { + png_uint_32 width; + + for (width = 1; width <= 16; ++width) + { + png_uint_32 height; + + for (height = 1; height <= 16; ++height) + { + /* The four combinations of DIY interlace and interlace or not - + * no interlace + DIY should be identical to no interlace with + * libpng doing it. + */ + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_NONE, + width, height, 0); + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_NONE, + width, height, 1); + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_ADAM7, + width, height, 0); + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_ADAM7, + width, height, 1); + } + } + } +} + +static void +make_size_images(png_store *ps) +{ + /* This is in case of errors. */ + safecat(ps->test, sizeof ps->test, 0, "make size images"); + + /* Arguments are colour_type, low bit depth, high bit depth + */ + make_size(ps, 0, 0, WRITE_BDHI); + make_size(ps, 2, 3, WRITE_BDHI); + make_size(ps, 3, 0, 3 /*palette: max 8 bits*/); + make_size(ps, 4, 3, WRITE_BDHI); + make_size(ps, 6, 3, WRITE_BDHI); +} + +#ifdef PNG_READ_SUPPORTED +/* Return a row based on image id and 'y' for checking: */ +static void +standard_row(png_const_structp pp, png_byte std[STANDARD_ROWMAX], + png_uint_32 id, png_uint_32 y) +{ + if (WIDTH_FROM_ID(id) == 0) + transform_row(pp, std, COL_FROM_ID(id), DEPTH_FROM_ID(id), y); + else + size_row(std, WIDTH_FROM_ID(id) * bit_size(pp, COL_FROM_ID(id), + DEPTH_FROM_ID(id)), y); +} +#endif /* PNG_READ_SUPPORTED */ + +/* Tests - individual test cases */ +/* Like 'make_standard' but errors are deliberately introduced into the calls + * to ensure that they get detected - it should not be possible to write an + * invalid image with libpng! + */ +/* TODO: the 'set' functions can probably all be made to take a + * png_const_structp rather than a modifiable one. + */ +#ifdef PNG_WARNINGS_SUPPORTED +static void +sBIT0_error_fn(png_structp pp, png_infop pi) +{ + /* 0 is invalid... */ + png_color_8 bad; + bad.red = bad.green = bad.blue = bad.gray = bad.alpha = 0; + png_set_sBIT(pp, pi, &bad); +} + +static void +sBIT_error_fn(png_structp pp, png_infop pi) +{ + png_byte bit_depth; + png_color_8 bad; + + if (png_get_color_type(pp, pi) == PNG_COLOR_TYPE_PALETTE) + bit_depth = 8; + + else + bit_depth = png_get_bit_depth(pp, pi); + + /* Now we know the bit depth we can easily generate an invalid sBIT entry */ + bad.red = bad.green = bad.blue = bad.gray = bad.alpha = + (png_byte)(bit_depth+1); + png_set_sBIT(pp, pi, &bad); +} + +static PNG_CONST struct +{ + void (*fn)(png_structp, png_infop); + PNG_CONST char *msg; + unsigned int warning :1; /* the error is a warning... */ +} error_test[] = + { + /* no warnings makes these errors undetectable. */ + { sBIT0_error_fn, "sBIT(0): failed to detect error", 1 }, + { sBIT_error_fn, "sBIT(too big): failed to detect error", 1 }, + }; + +static void +make_error(png_store* volatile psIn, png_byte PNG_CONST colour_type, + png_byte bit_depth, int interlace_type, int test, png_const_charp name) +{ + png_store * volatile ps = psIn; + + context(ps, fault); + + Try + { + png_structp pp; + png_infop pi; + + pp = set_store_for_write(ps, &pi, name); + + if (pp == NULL) + Throw ps; + + png_set_IHDR(pp, pi, transform_width(pp, colour_type, bit_depth), + transform_height(pp, colour_type, bit_depth), bit_depth, colour_type, + interlace_type, PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + + if (colour_type == 3) /* palette */ + init_standard_palette(ps, pp, pi, 1U << bit_depth, 0/*do tRNS*/); + + /* Time for a few errors; these are in various optional chunks, the + * standard tests test the standard chunks pretty well. + */ +# define exception__prev exception_prev_1 +# define exception__env exception_env_1 + Try + { + /* Expect this to throw: */ + ps->expect_error = !error_test[test].warning; + ps->expect_warning = error_test[test].warning; + ps->saw_warning = 0; + error_test[test].fn(pp, pi); + + /* Normally the error is only detected here: */ + png_write_info(pp, pi); + + /* And handle the case where it was only a warning: */ + if (ps->expect_warning && ps->saw_warning) + Throw ps; + + /* If we get here there is a problem, we have success - no error or + * no warning - when we shouldn't have success. Log an error. + */ + store_log(ps, pp, error_test[test].msg, 1 /*error*/); + } + + Catch (fault) + ps = fault; /* expected exit, make sure ps is not clobbered */ +#undef exception__prev +#undef exception__env + + /* And clear these flags */ + ps->expect_error = 0; + ps->expect_warning = 0; + + /* Now write the whole image, just to make sure that the detected, or + * undetected, errro has not created problems inside libpng. + */ + if (png_get_rowbytes(pp, pi) != + transform_rowsize(pp, colour_type, bit_depth)) + png_error(pp, "row size incorrect"); + + else + { + png_uint_32 h = transform_height(pp, colour_type, bit_depth); + int npasses = png_set_interlace_handling(pp); + int pass; + + if (npasses != npasses_from_interlace_type(pp, interlace_type)) + png_error(pp, "write: png_set_interlace_handling failed"); + + for (pass=0; passthis, colour_type, DEPTH(bdlo), interlace_type, + test, name); + + if (fail(pm)) + return 0; + } + } + } + + return 1; /* keep going */ +} +#endif + +static void +perform_error_test(png_modifier *pm) +{ +#ifdef PNG_WARNINGS_SUPPORTED /* else there are no cases that work! */ + /* Need to do this here because we just write in this test. */ + safecat(pm->this.test, sizeof pm->this.test, 0, "error test"); + + if (!make_errors(pm, 0, 0, WRITE_BDHI)) + return; + + if (!make_errors(pm, 2, 3, WRITE_BDHI)) + return; + + if (!make_errors(pm, 3, 0, 3)) + return; + + if (!make_errors(pm, 4, 3, WRITE_BDHI)) + return; + + if (!make_errors(pm, 6, 3, WRITE_BDHI)) + return; +#else + UNUSED(pm) +#endif +} + +/* This is just to validate the internal PNG formatting code - if this fails + * then the warning messages the library outputs will probably be garbage. + */ +static void +perform_formatting_test(png_store *volatile ps) +{ +#ifdef PNG_TIME_RFC1123_SUPPORTED + /* The handle into the formatting code is the RFC1123 support; this test does + * nothing if that is compiled out. + */ + context(ps, fault); + + Try + { + png_const_charp correct = "29 Aug 2079 13:53:60 +0000"; + png_const_charp result; +# if PNG_LIBPNG_VER >= 10600 + char timestring[29]; +# endif + png_structp pp; + png_time pt; + + pp = set_store_for_write(ps, NULL, "libpng formatting test"); + + if (pp == NULL) + Throw ps; + + + /* Arbitrary settings: */ + pt.year = 2079; + pt.month = 8; + pt.day = 29; + pt.hour = 13; + pt.minute = 53; + pt.second = 60; /* a leap second */ + +# if PNG_LIBPNG_VER < 10600 + result = png_convert_to_rfc1123(pp, &pt); +# else + if (png_convert_to_rfc1123_buffer(timestring, &pt)) + result = timestring; + + else + result = NULL; +# endif + + if (result == NULL) + png_error(pp, "png_convert_to_rfc1123 failed"); + + if (strcmp(result, correct) != 0) + { + size_t pos = 0; + char msg[128]; + + pos = safecat(msg, sizeof msg, pos, "png_convert_to_rfc1123("); + pos = safecat(msg, sizeof msg, pos, correct); + pos = safecat(msg, sizeof msg, pos, ") returned: '"); + pos = safecat(msg, sizeof msg, pos, result); + pos = safecat(msg, sizeof msg, pos, "'"); + + png_error(pp, msg); + } + + store_write_reset(ps); + } + + Catch(fault) + { + store_write_reset(fault); + } +#else + UNUSED(ps) +#endif +} + +#ifdef PNG_READ_SUPPORTED +/* Because we want to use the same code in both the progressive reader and the + * sequential reader it is necessary to deal with the fact that the progressive + * reader callbacks only have one parameter (png_get_progressive_ptr()), so this + * must contain all the test parameters and all the local variables directly + * accessible to the sequential reader implementation. + * + * The technique adopted is to reinvent part of what Dijkstra termed a + * 'display'; an array of pointers to the stack frames of enclosing functions so + * that a nested function definition can access the local (C auto) variables of + * the functions that contain its definition. In fact C provides the first + * pointer (the local variables - the stack frame pointer) and the last (the + * global variables - the BCPL global vector typically implemented as global + * addresses), this code requires one more pointer to make the display - the + * local variables (and function call parameters) of the function that actually + * invokes either the progressive or sequential reader. + * + * Perhaps confusingly this technique is confounded with classes - the + * 'standard_display' defined here is sub-classed as the 'gamma_display' below. + * A gamma_display is a standard_display, taking advantage of the ANSI-C + * requirement that the pointer to the first member of a structure must be the + * same as the pointer to the structure. This allows us to reuse standard_ + * functions in the gamma test code; something that could not be done with + * nested functions! + */ +typedef struct standard_display +{ + png_store* ps; /* Test parameters (passed to the function) */ + png_byte colour_type; + png_byte bit_depth; + png_byte red_sBIT; /* Input data sBIT values. */ + png_byte green_sBIT; + png_byte blue_sBIT; + png_byte alpha_sBIT; + int interlace_type; + png_uint_32 id; /* Calculated file ID */ + png_uint_32 w; /* Width of image */ + png_uint_32 h; /* Height of image */ + int npasses; /* Number of interlaced passes */ + png_uint_32 pixel_size; /* Width of one pixel in bits */ + png_uint_32 bit_width; /* Width of output row in bits */ + size_t cbRow; /* Bytes in a row of the output image */ + int do_interlace; /* Do interlacing internally */ + int is_transparent; /* Transparency information was present. */ + int speed; /* Doing a speed test */ + int use_update_info;/* Call update_info, not start_image */ + struct + { + png_uint_16 red; + png_uint_16 green; + png_uint_16 blue; + } transparent; /* The transparent color, if set. */ + int npalette; /* Number of entries in the palette. */ + store_palette + palette; +} standard_display; + +static void +standard_display_init(standard_display *dp, png_store* ps, png_uint_32 id, + int do_interlace, int use_update_info) +{ + memset(dp, 0, sizeof *dp); + + dp->ps = ps; + dp->colour_type = COL_FROM_ID(id); + dp->bit_depth = DEPTH_FROM_ID(id); + if (dp->bit_depth < 1 || dp->bit_depth > 16) + internal_error(ps, "internal: bad bit depth"); + if (dp->colour_type == 3) + dp->red_sBIT = dp->blue_sBIT = dp->green_sBIT = dp->alpha_sBIT = 8; + else + dp->red_sBIT = dp->blue_sBIT = dp->green_sBIT = dp->alpha_sBIT = + dp->bit_depth; + dp->interlace_type = INTERLACE_FROM_ID(id); + dp->id = id; + /* All the rest are filled in after the read_info: */ + dp->w = 0; + dp->h = 0; + dp->npasses = 0; + dp->pixel_size = 0; + dp->bit_width = 0; + dp->cbRow = 0; + dp->do_interlace = do_interlace; + dp->is_transparent = 0; + dp->speed = ps->speed; + dp->use_update_info = use_update_info; + dp->npalette = 0; + /* Preset the transparent color to black: */ + memset(&dp->transparent, 0, sizeof dp->transparent); + /* Preset the palette to full intensity/opaque througout: */ + memset(dp->palette, 0xff, sizeof dp->palette); +} + +/* Initialize the palette fields - this must be done later because the palette + * comes from the particular png_store_file that is selected. + */ +static void +standard_palette_init(standard_display *dp) +{ + store_palette_entry *palette = store_current_palette(dp->ps, &dp->npalette); + + /* The remaining entries remain white/opaque. */ + if (dp->npalette > 0) + { + int i = dp->npalette; + memcpy(dp->palette, palette, i * sizeof *palette); + + /* Check for a non-opaque palette entry: */ + while (--i >= 0) + if (palette[i].alpha < 255) + break; + +# ifdef __GNUC__ + /* GCC can't handle the more obviously optimizable version. */ + if (i >= 0) + dp->is_transparent = 1; + else + dp->is_transparent = 0; +# else + dp->is_transparent = (i >= 0); +# endif + } +} + +/* Utility to read the palette from the PNG file and convert it into + * store_palette format. This returns 1 if there is any transparency in the + * palette (it does not check for a transparent colour in the non-palette case.) + */ +static int +read_palette(store_palette palette, int *npalette, png_const_structp pp, + png_infop pi) +{ + png_colorp pal; + png_bytep trans_alpha; + int num; + + pal = 0; + *npalette = -1; + + if (png_get_PLTE(pp, pi, &pal, npalette) & PNG_INFO_PLTE) + { + int i = *npalette; + + if (i <= 0 || i > 256) + png_error(pp, "validate: invalid PLTE count"); + + while (--i >= 0) + { + palette[i].red = pal[i].red; + palette[i].green = pal[i].green; + palette[i].blue = pal[i].blue; + } + + /* Mark the remainder of the entries with a flag value (other than + * white/opaque which is the flag value stored above.) + */ + memset(palette + *npalette, 126, (256-*npalette) * sizeof *palette); + } + + else /* !png_get_PLTE */ + { + if (*npalette != (-1)) + png_error(pp, "validate: invalid PLTE result"); + /* But there is no palette, so record this: */ + *npalette = 0; + memset(palette, 113, sizeof (store_palette)); + } + + trans_alpha = 0; + num = 2; /* force error below */ + if ((png_get_tRNS(pp, pi, &trans_alpha, &num, 0) & PNG_INFO_tRNS) != 0 && + (trans_alpha != NULL || num != 1/*returns 1 for a transparent color*/) && + /* Oops, if a palette tRNS gets expanded png_read_update_info (at least so + * far as 1.5.4) does not remove the trans_alpha pointer, only num_trans, + * so in the above call we get a success, we get a pointer (who knows what + * to) and we get num_trans == 0: + */ + !(trans_alpha != NULL && num == 0)) /* TODO: fix this in libpng. */ + { + int i; + + /* Any of these are crash-worthy - given the implementation of + * png_get_tRNS up to 1.5 an app won't crash if it just checks the + * result above and fails to check that the variables it passed have + * actually been filled in! Note that if the app were to pass the + * last, png_color_16p, variable too it couldn't rely on this. + */ + if (trans_alpha == NULL || num <= 0 || num > 256 || num > *npalette) + png_error(pp, "validate: unexpected png_get_tRNS (palette) result"); + + for (i=0; iis_transparent) + png_error(pp, "validate: palette transparency changed"); + + if (npalette != dp->npalette) + { + size_t pos = 0; + char msg[64]; + + pos = safecat(msg, sizeof msg, pos, "validate: palette size changed: "); + pos = safecatn(msg, sizeof msg, pos, dp->npalette); + pos = safecat(msg, sizeof msg, pos, " -> "); + pos = safecatn(msg, sizeof msg, pos, npalette); + png_error(pp, msg); + } + + { + int i = npalette; /* npalette is aliased */ + + while (--i >= 0) + if (palette[i].red != dp->palette[i].red || + palette[i].green != dp->palette[i].green || + palette[i].blue != dp->palette[i].blue || + palette[i].alpha != dp->palette[i].alpha) + png_error(pp, "validate: PLTE or tRNS chunk changed"); + } +} + +/* By passing a 'standard_display' the progressive callbacks can be used + * directly by the sequential code, the functions suffixed "_imp" are the + * implementations, the functions without the suffix are the callbacks. + * + * The code for the info callback is split into two because this callback calls + * png_read_update_info or png_start_read_image and what gets called depends on + * whether the info needs updating (we want to test both calls in pngvalid.) + */ +static void +standard_info_part1(standard_display *dp, png_structp pp, png_infop pi) +{ + if (png_get_bit_depth(pp, pi) != dp->bit_depth) + png_error(pp, "validate: bit depth changed"); + + if (png_get_color_type(pp, pi) != dp->colour_type) + png_error(pp, "validate: color type changed"); + + if (png_get_filter_type(pp, pi) != PNG_FILTER_TYPE_BASE) + png_error(pp, "validate: filter type changed"); + + if (png_get_interlace_type(pp, pi) != dp->interlace_type) + png_error(pp, "validate: interlacing changed"); + + if (png_get_compression_type(pp, pi) != PNG_COMPRESSION_TYPE_BASE) + png_error(pp, "validate: compression type changed"); + + dp->w = png_get_image_width(pp, pi); + + if (dp->w != standard_width(pp, dp->id)) + png_error(pp, "validate: image width changed"); + + dp->h = png_get_image_height(pp, pi); + + if (dp->h != standard_height(pp, dp->id)) + png_error(pp, "validate: image height changed"); + + /* Record (but don't check at present) the input sBIT according to the colour + * type information. + */ + { + png_color_8p sBIT = 0; + + if (png_get_sBIT(pp, pi, &sBIT) & PNG_INFO_sBIT) + { + int sBIT_invalid = 0; + + if (sBIT == 0) + png_error(pp, "validate: unexpected png_get_sBIT result"); + + if (dp->colour_type & PNG_COLOR_MASK_COLOR) + { + if (sBIT->red == 0 || sBIT->red > dp->bit_depth) + sBIT_invalid = 1; + else + dp->red_sBIT = sBIT->red; + + if (sBIT->green == 0 || sBIT->green > dp->bit_depth) + sBIT_invalid = 1; + else + dp->green_sBIT = sBIT->green; + + if (sBIT->blue == 0 || sBIT->blue > dp->bit_depth) + sBIT_invalid = 1; + else + dp->blue_sBIT = sBIT->blue; + } + + else /* !COLOR */ + { + if (sBIT->gray == 0 || sBIT->gray > dp->bit_depth) + sBIT_invalid = 1; + else + dp->blue_sBIT = dp->green_sBIT = dp->red_sBIT = sBIT->gray; + } + + /* All 8 bits in tRNS for a palette image are significant - see the + * spec. + */ + if (dp->colour_type & PNG_COLOR_MASK_ALPHA) + { + if (sBIT->alpha == 0 || sBIT->alpha > dp->bit_depth) + sBIT_invalid = 1; + else + dp->alpha_sBIT = sBIT->alpha; + } + + if (sBIT_invalid) + png_error(pp, "validate: sBIT value out of range"); + } + } + + /* Important: this is validating the value *before* any transforms have been + * put in place. It doesn't matter for the standard tests, where there are + * no transforms, but it does for other tests where rowbytes may change after + * png_read_update_info. + */ + if (png_get_rowbytes(pp, pi) != standard_rowsize(pp, dp->id)) + png_error(pp, "validate: row size changed"); + + /* Validate the colour type 3 palette (this can be present on other color + * types.) + */ + standard_palette_validate(dp, pp, pi); + + /* In any case always check for a tranparent color (notice that the + * colour type 3 case must not give a successful return on the get_tRNS call + * with these arguments!) + */ + { + png_color_16p trans_color = 0; + + if (png_get_tRNS(pp, pi, 0, 0, &trans_color) & PNG_INFO_tRNS) + { + if (trans_color == 0) + png_error(pp, "validate: unexpected png_get_tRNS (color) result"); + + switch (dp->colour_type) + { + case 0: + dp->transparent.red = dp->transparent.green = dp->transparent.blue = + trans_color->gray; + dp->is_transparent = 1; + break; + + case 2: + dp->transparent.red = trans_color->red; + dp->transparent.green = trans_color->green; + dp->transparent.blue = trans_color->blue; + dp->is_transparent = 1; + break; + + case 3: + /* Not expected because it should result in the array case + * above. + */ + png_error(pp, "validate: unexpected png_get_tRNS result"); + break; + + default: + png_error(pp, "validate: invalid tRNS chunk with alpha image"); + } + } + } + + /* Read the number of passes - expected to match the value used when + * creating the image (interlaced or not). This has the side effect of + * turning on interlace handling (if do_interlace is not set.) + */ + dp->npasses = npasses_from_interlace_type(pp, dp->interlace_type); + if (!dp->do_interlace && dp->npasses != png_set_interlace_handling(pp)) + png_error(pp, "validate: file changed interlace type"); + + /* Caller calls png_read_update_info or png_start_read_image now, then calls + * part2. + */ +} + +/* This must be called *after* the png_read_update_info call to get the correct + * 'rowbytes' value, otherwise png_get_rowbytes will refer to the untransformed + * image. + */ +static void +standard_info_part2(standard_display *dp, png_const_structp pp, + png_const_infop pi, int nImages) +{ + /* Record cbRow now that it can be found. */ + dp->pixel_size = bit_size(pp, png_get_color_type(pp, pi), + png_get_bit_depth(pp, pi)); + dp->bit_width = png_get_image_width(pp, pi) * dp->pixel_size; + dp->cbRow = png_get_rowbytes(pp, pi); + + /* Validate the rowbytes here again. */ + if (dp->cbRow != (dp->bit_width+7)/8) + png_error(pp, "bad png_get_rowbytes calculation"); + + /* Then ensure there is enough space for the output image(s). */ + store_ensure_image(dp->ps, pp, nImages, dp->cbRow, dp->h); +} + +static void +standard_info_imp(standard_display *dp, png_structp pp, png_infop pi, + int nImages) +{ + /* Note that the validation routine has the side effect of turning on + * interlace handling in the subsequent code. + */ + standard_info_part1(dp, pp, pi); + + /* And the info callback has to call this (or png_read_update_info - see + * below in the png_modifier code for that variant. + */ + if (dp->use_update_info) + { + /* For debugging the effect of multiple calls: */ + int i = dp->use_update_info; + while (i-- > 0) + png_read_update_info(pp, pi); + } + + else + png_start_read_image(pp); + + /* Validate the height, width and rowbytes plus ensure that sufficient buffer + * exists for decoding the image. + */ + standard_info_part2(dp, pp, pi, nImages); +} + +static void +standard_info(png_structp pp, png_infop pi) +{ + standard_display *dp = voidcast(standard_display*, + png_get_progressive_ptr(pp)); + + /* Call with nImages==1 because the progressive reader can only produce one + * image. + */ + standard_info_imp(dp, pp, pi, 1 /*only one image*/); +} + +static void +progressive_row(png_structp ppIn, png_bytep new_row, png_uint_32 y, int pass) +{ + png_const_structp pp = ppIn; + PNG_CONST standard_display *dp = voidcast(standard_display*, + png_get_progressive_ptr(pp)); + + /* When handling interlacing some rows will be absent in each pass, the + * callback still gets called, but with a NULL pointer. This is checked + * in the 'else' clause below. We need our own 'cbRow', but we can't call + * png_get_rowbytes because we got no info structure. + */ + if (new_row != NULL) + { + png_bytep row; + + /* In the case where the reader doesn't do the interlace it gives + * us the y in the sub-image: + */ + if (dp->do_interlace && dp->interlace_type == PNG_INTERLACE_ADAM7) + { +#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED + /* Use this opportunity to validate the png 'current' APIs: */ + if (y != png_get_current_row_number(pp)) + png_error(pp, "png_get_current_row_number is broken"); + + if (pass != png_get_current_pass_number(pp)) + png_error(pp, "png_get_current_pass_number is broken"); +#endif + + y = PNG_ROW_FROM_PASS_ROW(y, pass); + } + + /* Validate this just in case. */ + if (y >= dp->h) + png_error(pp, "invalid y to progressive row callback"); + + row = store_image_row(dp->ps, pp, 0, y); + +#ifdef PNG_READ_INTERLACING_SUPPORTED + /* Combine the new row into the old: */ + if (dp->do_interlace) + { + if (dp->interlace_type == PNG_INTERLACE_ADAM7) + deinterlace_row(row, new_row, dp->pixel_size, dp->w, pass); + else + row_copy(row, new_row, dp->pixel_size * dp->w); + } + else + png_progressive_combine_row(pp, row, new_row); +#endif /* PNG_READ_INTERLACING_SUPPORTED */ + } + +#ifdef PNG_READ_INTERLACING_SUPPORTED + else if (dp->interlace_type == PNG_INTERLACE_ADAM7 && + PNG_ROW_IN_INTERLACE_PASS(y, pass) && + PNG_PASS_COLS(dp->w, pass) > 0) + png_error(pp, "missing row in progressive de-interlacing"); +#endif /* PNG_READ_INTERLACING_SUPPORTED */ +} + +static void +sequential_row(standard_display *dp, png_structp pp, png_infop pi, + PNG_CONST int iImage, PNG_CONST int iDisplay) +{ + PNG_CONST int npasses = dp->npasses; + PNG_CONST int do_interlace = dp->do_interlace && + dp->interlace_type == PNG_INTERLACE_ADAM7; + PNG_CONST png_uint_32 height = standard_height(pp, dp->id); + PNG_CONST png_uint_32 width = standard_width(pp, dp->id); + PNG_CONST png_store* ps = dp->ps; + int pass; + + for (pass=0; pass 0 && PNG_ROW_IN_INTERLACE_PASS(y, pass)) + { + /* Read the row into a pair of temporary buffers, then do the + * merge here into the output rows. + */ + png_byte row[STANDARD_ROWMAX], display[STANDARD_ROWMAX]; + + /* The following aids (to some extent) error detection - we can + * see where png_read_row wrote. Use opposite values in row and + * display to make this easier. Don't use 0xff (which is used in + * the image write code to fill unused bits) or 0 (which is a + * likely value to overwrite unused bits with). + */ + memset(row, 0xc5, sizeof row); + memset(display, 0x5c, sizeof display); + + png_read_row(pp, row, display); + + if (iImage >= 0) + deinterlace_row(store_image_row(ps, pp, iImage, y), row, + dp->pixel_size, dp->w, pass); + + if (iDisplay >= 0) + deinterlace_row(store_image_row(ps, pp, iDisplay, y), display, + dp->pixel_size, dp->w, pass); + } + } + else + png_read_row(pp, + iImage >= 0 ? store_image_row(ps, pp, iImage, y) : NULL, + iDisplay >= 0 ? store_image_row(ps, pp, iDisplay, y) : NULL); + } + } + + /* And finish the read operation (only really necessary if the caller wants + * to find additional data in png_info from chunks after the last IDAT.) + */ + png_read_end(pp, pi); +} + +#ifdef PNG_TEXT_SUPPORTED +static void +standard_check_text(png_const_structp pp, png_const_textp tp, + png_const_charp keyword, png_const_charp text) +{ + char msg[1024]; + size_t pos = safecat(msg, sizeof msg, 0, "text: "); + size_t ok; + + pos = safecat(msg, sizeof msg, pos, keyword); + pos = safecat(msg, sizeof msg, pos, ": "); + ok = pos; + + if (tp->compression != TEXT_COMPRESSION) + { + char buf[64]; + + sprintf(buf, "compression [%d->%d], ", TEXT_COMPRESSION, + tp->compression); + pos = safecat(msg, sizeof msg, pos, buf); + } + + if (tp->key == NULL || strcmp(tp->key, keyword) != 0) + { + pos = safecat(msg, sizeof msg, pos, "keyword \""); + if (tp->key != NULL) + { + pos = safecat(msg, sizeof msg, pos, tp->key); + pos = safecat(msg, sizeof msg, pos, "\", "); + } + + else + pos = safecat(msg, sizeof msg, pos, "null, "); + } + + if (tp->text == NULL) + pos = safecat(msg, sizeof msg, pos, "text lost, "); + + else + { + if (tp->text_length != strlen(text)) + { + char buf[64]; + sprintf(buf, "text length changed[%lu->%lu], ", + (unsigned long)strlen(text), (unsigned long)tp->text_length); + pos = safecat(msg, sizeof msg, pos, buf); + } + + if (strcmp(tp->text, text) != 0) + { + pos = safecat(msg, sizeof msg, pos, "text becomes \""); + pos = safecat(msg, sizeof msg, pos, tp->text); + pos = safecat(msg, sizeof msg, pos, "\" (was \""); + pos = safecat(msg, sizeof msg, pos, text); + pos = safecat(msg, sizeof msg, pos, "\"), "); + } + } + + if (tp->itxt_length != 0) + pos = safecat(msg, sizeof msg, pos, "iTXt length set, "); + + if (tp->lang != NULL) + { + pos = safecat(msg, sizeof msg, pos, "iTXt language \""); + pos = safecat(msg, sizeof msg, pos, tp->lang); + pos = safecat(msg, sizeof msg, pos, "\", "); + } + + if (tp->lang_key != NULL) + { + pos = safecat(msg, sizeof msg, pos, "iTXt keyword \""); + pos = safecat(msg, sizeof msg, pos, tp->lang_key); + pos = safecat(msg, sizeof msg, pos, "\", "); + } + + if (pos > ok) + { + msg[pos-2] = '\0'; /* Remove the ", " at the end */ + png_error(pp, msg); + } +} + +static void +standard_text_validate(standard_display *dp, png_const_structp pp, + png_infop pi) +{ + png_textp tp = NULL; + png_uint_32 num_text = png_get_text(pp, pi, &tp, NULL); + + if (num_text == 2 && tp != NULL) + { + standard_check_text(pp, tp, "image name", dp->ps->current->name); + standard_check_text(pp, tp+1, "end marker", "end"); + } + + else + { + char msg[64]; + + sprintf(msg, "expected two text items, got %lu", + (unsigned long)num_text); + png_error(pp, msg); + } +} +#else +# define standard_text_validate(dp,pp,pi) ((void)0) +#endif + +static void +standard_row_validate(standard_display *dp, png_const_structp pp, + int iImage, int iDisplay, png_uint_32 y) +{ + int where; + png_byte std[STANDARD_ROWMAX]; + + /* The row must be pre-initialized to the magic number here for the size + * tests to pass: + */ + memset(std, 178, sizeof std); + standard_row(pp, std, dp->id, y); + + /* At the end both the 'row' and 'display' arrays should end up identical. + * In earlier passes 'row' will be partially filled in, with only the pixels + * that have been read so far, but 'display' will have those pixels + * replicated to fill the unread pixels while reading an interlaced image. +#if PNG_LIBPNG_VER < 10506 + * The side effect inside the libpng sequential reader is that the 'row' + * array retains the correct values for unwritten pixels within the row + * bytes, while the 'display' array gets bits off the end of the image (in + * the last byte) trashed. Unfortunately in the progressive reader the + * row bytes are always trashed, so we always do a pixel_cmp here even though + * a memcmp of all cbRow bytes will succeed for the sequential reader. +#endif + */ + if (iImage >= 0 && + (where = pixel_cmp(std, store_image_row(dp->ps, pp, iImage, y), + dp->bit_width)) != 0) + { + char msg[64]; + sprintf(msg, "PNG image row[%lu][%d] changed from %.2x to %.2x", + (unsigned long)y, where-1, std[where-1], + store_image_row(dp->ps, pp, iImage, y)[where-1]); + png_error(pp, msg); + } + +#if PNG_LIBPNG_VER < 10506 + /* In this case use pixel_cmp because we need to compare a partial + * byte at the end of the row if the row is not an exact multiple + * of 8 bits wide. (This is fixed in libpng-1.5.6 and pixel_cmp is + * changed to match!) + */ +#endif + if (iDisplay >= 0 && + (where = pixel_cmp(std, store_image_row(dp->ps, pp, iDisplay, y), + dp->bit_width)) != 0) + { + char msg[64]; + sprintf(msg, "display row[%lu][%d] changed from %.2x to %.2x", + (unsigned long)y, where-1, std[where-1], + store_image_row(dp->ps, pp, iDisplay, y)[where-1]); + png_error(pp, msg); + } +} + +static void +standard_image_validate(standard_display *dp, png_const_structp pp, int iImage, + int iDisplay) +{ + png_uint_32 y; + + if (iImage >= 0) + store_image_check(dp->ps, pp, iImage); + + if (iDisplay >= 0) + store_image_check(dp->ps, pp, iDisplay); + + for (y=0; yh; ++y) + standard_row_validate(dp, pp, iImage, iDisplay, y); + + /* This avoids false positives if the validation code is never called! */ + dp->ps->validated = 1; +} + +static void +standard_end(png_structp ppIn, png_infop pi) +{ + png_const_structp pp = ppIn; + standard_display *dp = voidcast(standard_display*, + png_get_progressive_ptr(pp)); + + UNUSED(pi) + + /* Validate the image - progressive reading only produces one variant for + * interlaced images. + */ + standard_text_validate(dp, pp, pi); + standard_image_validate(dp, pp, 0, -1); +} + +/* A single test run checking the standard image to ensure it is not damaged. */ +static void +standard_test(png_store* PNG_CONST psIn, png_uint_32 PNG_CONST id, + int do_interlace, int use_update_info) +{ + standard_display d; + context(psIn, fault); + + /* Set up the display (stack frame) variables from the arguments to the + * function and initialize the locals that are filled in later. + */ + standard_display_init(&d, psIn, id, do_interlace, use_update_info); + + /* Everything is protected by a Try/Catch. The functions called also + * typically have local Try/Catch blocks. + */ + Try + { + png_structp pp; + png_infop pi; + + /* Get a png_struct for reading the image. This will throw an error if it + * fails, so we don't need to check the result. + */ + pp = set_store_for_read(d.ps, &pi, d.id, + d.do_interlace ? (d.ps->progressive ? + "pngvalid progressive deinterlacer" : + "pngvalid sequential deinterlacer") : (d.ps->progressive ? + "progressive reader" : "sequential reader")); + + /* Initialize the palette correctly from the png_store_file. */ + standard_palette_init(&d); + + /* Introduce the correct read function. */ + if (d.ps->progressive) + { + png_set_progressive_read_fn(pp, &d, standard_info, progressive_row, + standard_end); + + /* Now feed data into the reader until we reach the end: */ + store_progressive_read(d.ps, pp, pi); + } + else + { + /* Note that this takes the store, not the display. */ + png_set_read_fn(pp, d.ps, store_read); + + /* Check the header values: */ + png_read_info(pp, pi); + + /* The code tests both versions of the images that the sequential + * reader can produce. + */ + standard_info_imp(&d, pp, pi, 2 /*images*/); + + /* Need the total bytes in the image below; we can't get to this point + * unless the PNG file values have been checked against the expected + * values. + */ + { + sequential_row(&d, pp, pi, 0, 1); + + /* After the last pass loop over the rows again to check that the + * image is correct. + */ + if (!d.speed) + { + standard_text_validate(&d, pp, pi); + standard_image_validate(&d, pp, 0, 1); + } + else + d.ps->validated = 1; + } + } + + /* Check for validation. */ + if (!d.ps->validated) + png_error(pp, "image read failed silently"); + + /* Successful completion. */ + } + + Catch(fault) + d.ps = fault; /* make sure this hasn't been clobbered. */ + + /* In either case clean up the store. */ + store_read_reset(d.ps); +} + +static int +test_standard(png_modifier* PNG_CONST pm, png_byte PNG_CONST colour_type, + int bdlo, int PNG_CONST bdhi) +{ + for (; bdlo <= bdhi; ++bdlo) + { + int interlace_type; + + for (interlace_type = PNG_INTERLACE_NONE; + interlace_type < PNG_INTERLACE_LAST; ++interlace_type) + { + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + interlace_type, 0, 0, 0), 0/*do_interlace*/, pm->use_update_info); + + if (fail(pm)) + return 0; + } + } + + return 1; /* keep going */ +} + +static void +perform_standard_test(png_modifier *pm) +{ + /* Test each colour type over the valid range of bit depths (expressed as + * log2(bit_depth) in turn, stop as soon as any error is detected. + */ + if (!test_standard(pm, 0, 0, READ_BDHI)) + return; + + if (!test_standard(pm, 2, 3, READ_BDHI)) + return; + + if (!test_standard(pm, 3, 0, 3)) + return; + + if (!test_standard(pm, 4, 3, READ_BDHI)) + return; + + if (!test_standard(pm, 6, 3, READ_BDHI)) + return; +} + + +/********************************** SIZE TESTS ********************************/ +static int +test_size(png_modifier* PNG_CONST pm, png_byte PNG_CONST colour_type, + int bdlo, int PNG_CONST bdhi) +{ + /* Run the tests on each combination. + * + * NOTE: on my 32 bit x86 each of the following blocks takes + * a total of 3.5 seconds if done across every combo of bit depth + * width and height. This is a waste of time in practice, hence the + * hinc and winc stuff: + */ + static PNG_CONST png_byte hinc[] = {1, 3, 11, 1, 5}; + static PNG_CONST png_byte winc[] = {1, 9, 5, 7, 1}; + for (; bdlo <= bdhi; ++bdlo) + { + png_uint_32 h, w; + + for (h=1; h<=16; h+=hinc[bdlo]) for (w=1; w<=16; w+=winc[bdlo]) + { + /* First test all the 'size' images against the sequential + * reader using libpng to deinterlace (where required.) This + * validates the write side of libpng. There are four possibilities + * to validate. + */ + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_NONE, w, h, 0), 0/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; + + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_NONE, w, h, 1), 0/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; + + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_ADAM7, w, h, 0), 0/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; + + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_ADAM7, w, h, 1), 0/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; + + /* Now validate the interlaced read side - do_interlace true, + * in the progressive case this does actually make a difference + * to the code used in the non-interlaced case too. + */ + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_NONE, w, h, 0), 1/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; + + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_ADAM7, w, h, 0), 1/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; + } + } + + return 1; /* keep going */ +} + +static void +perform_size_test(png_modifier *pm) +{ + /* Test each colour type over the valid range of bit depths (expressed as + * log2(bit_depth) in turn, stop as soon as any error is detected. + */ + if (!test_size(pm, 0, 0, READ_BDHI)) + return; + + if (!test_size(pm, 2, 3, READ_BDHI)) + return; + + /* For the moment don't do the palette test - it's a waste of time when + * compared to the grayscale test. + */ +#if 0 + if (!test_size(pm, 3, 0, 3)) + return; +#endif + + if (!test_size(pm, 4, 3, READ_BDHI)) + return; + + if (!test_size(pm, 6, 3, READ_BDHI)) + return; +} + + +/******************************* TRANSFORM TESTS ******************************/ +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +/* A set of tests to validate libpng image transforms. The possibilities here + * are legion because the transforms can be combined in a combinatorial + * fashion. To deal with this some measure of restraint is required, otherwise + * the tests would take forever. + */ +typedef struct image_pixel +{ + /* A local (pngvalid) representation of a PNG pixel, in all its + * various forms. + */ + unsigned int red, green, blue, alpha; /* For non-palette images. */ + unsigned int palette_index; /* For a palette image. */ + png_byte colour_type; /* As in the spec. */ + png_byte bit_depth; /* Defines bit size in row */ + png_byte sample_depth; /* Scale of samples */ + int have_tRNS; /* tRNS chunk may need processing */ + + /* For checking the code calculates double precision floating point values + * along with an error value, accumulated from the transforms. Because an + * sBIT setting allows larger error bounds (indeed, by the spec, apparently + * up to just less than +/-1 in the scaled value) the *lowest* sBIT for each + * channel is stored. This sBIT value is folded in to the stored error value + * at the end of the application of the transforms to the pixel. + */ + double redf, greenf, bluef, alphaf; + double rede, greene, bluee, alphae; + png_byte red_sBIT, green_sBIT, blue_sBIT, alpha_sBIT; +} image_pixel; + +/* Shared utility function, see below. */ +static void +image_pixel_setf(image_pixel *this, unsigned int max) +{ + this->redf = this->red / (double)max; + this->greenf = this->green / (double)max; + this->bluef = this->blue / (double)max; + this->alphaf = this->alpha / (double)max; + + if (this->red < max) + this->rede = this->redf * DBL_EPSILON; + else + this->rede = 0; + if (this->green < max) + this->greene = this->greenf * DBL_EPSILON; + else + this->greene = 0; + if (this->blue < max) + this->bluee = this->bluef * DBL_EPSILON; + else + this->bluee = 0; + if (this->alpha < max) + this->alphae = this->alphaf * DBL_EPSILON; + else + this->alphae = 0; +} + +/* Initialize the structure for the next pixel - call this before doing any + * transforms and call it for each pixel since all the fields may need to be + * reset. + */ +static void +image_pixel_init(image_pixel *this, png_const_bytep row, png_byte colour_type, + png_byte bit_depth, png_uint_32 x, store_palette palette) +{ + PNG_CONST png_byte sample_depth = (png_byte)(colour_type == + PNG_COLOR_TYPE_PALETTE ? 8 : bit_depth); + PNG_CONST unsigned int max = (1U<palette_index = this->red = this->green = this->blue = + sample(row, colour_type, bit_depth, x, 0); + this->alpha = max; + this->red_sBIT = this->green_sBIT = this->blue_sBIT = this->alpha_sBIT = + sample_depth; + + /* Then override as appropriate: */ + if (colour_type == 3) /* palette */ + { + /* This permits the caller to default to the sample value. */ + if (palette != 0) + { + PNG_CONST unsigned int i = this->palette_index; + + this->red = palette[i].red; + this->green = palette[i].green; + this->blue = palette[i].blue; + this->alpha = palette[i].alpha; + } + } + + else /* not palette */ + { + unsigned int i = 0; + + if (colour_type & 2) + { + this->green = sample(row, colour_type, bit_depth, x, 1); + this->blue = sample(row, colour_type, bit_depth, x, 2); + i = 2; + } + if (colour_type & 4) + this->alpha = sample(row, colour_type, bit_depth, x, ++i); + } + + /* Calculate the scaled values, these are simply the values divided by + * 'max' and the error is initialized to the double precision epsilon value + * from the header file. + */ + image_pixel_setf(this, max); + + /* Store the input information for use in the transforms - these will + * modify the information. + */ + this->colour_type = colour_type; + this->bit_depth = bit_depth; + this->sample_depth = sample_depth; + this->have_tRNS = 0; +} + +/* Convert a palette image to an rgb image. This necessarily converts the tRNS + * chunk at the same time, because the tRNS will be in palette form. The way + * palette validation works means that the original palette is never updated, + * instead the image_pixel value from the row contains the RGB of the + * corresponding palette entry and *this* is updated. Consequently this routine + * only needs to change the colour type information. + */ +static void +image_pixel_convert_PLTE(image_pixel *this) +{ + if (this->colour_type == PNG_COLOR_TYPE_PALETTE) + { + if (this->have_tRNS) + { + this->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; + this->have_tRNS = 0; + } + else + this->colour_type = PNG_COLOR_TYPE_RGB; + + /* The bit depth of the row changes at this point too (notice that this is + * the row format, not the sample depth, which is separate.) + */ + this->bit_depth = 8; + } +} + +/* Add an alpha channel; this will import the tRNS information because tRNS is + * not valid in an alpha image. The bit depth will invariably be set to at + * least 8. Palette images will be converted to alpha (using the above API). + */ +static void +image_pixel_add_alpha(image_pixel *this, PNG_CONST standard_display *display) +{ + if (this->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(this); + + if ((this->colour_type & PNG_COLOR_MASK_ALPHA) == 0) + { + if (this->colour_type == PNG_COLOR_TYPE_GRAY) + { + if (this->bit_depth < 8) + this->bit_depth = 8; + + if (this->have_tRNS) + { + this->have_tRNS = 0; + + /* Check the input, original, channel value here against the + * original tRNS gray chunk valie. + */ + if (this->red == display->transparent.red) + this->alphaf = 0; + else + this->alphaf = 1; + } + else + this->alphaf = 1; + + this->colour_type = PNG_COLOR_TYPE_GRAY_ALPHA; + } + + else if (this->colour_type == PNG_COLOR_TYPE_RGB) + { + if (this->have_tRNS) + { + this->have_tRNS = 0; + + /* Again, check the exact input values, not the current transformed + * value! + */ + if (this->red == display->transparent.red && + this->green == display->transparent.green && + this->blue == display->transparent.blue) + this->alphaf = 0; + else + this->alphaf = 1; + + this->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; + } + } + + /* The error in the alpha is zero and the sBIT value comes from the + * original sBIT data (actually it will always be the original bit depth). + */ + this->alphae = 0; + this->alpha_sBIT = display->alpha_sBIT; + } +} + +struct transform_display; +typedef struct image_transform +{ + /* The name of this transform: a string. */ + PNG_CONST char *name; + + /* Each transform can be disabled from the command line: */ + int enable; + + /* The global list of transforms; read only. */ + struct image_transform *PNG_CONST list; + + /* The global count of the number of times this transform has been set on an + * image. + */ + unsigned int global_use; + + /* The local count of the number of times this transform has been set. */ + unsigned int local_use; + + /* The next transform in the list, each transform must call its own next + * transform after it has processed the pixel successfully. + */ + PNG_CONST struct image_transform *next; + + /* A single transform for the image, expressed as a series of function + * callbacks and some space for values. + * + * First a callback to add any required modifications to the png_modifier; + * this gets called just before the modifier is set up for read. + */ + void (*ini)(PNG_CONST struct image_transform *this, + struct transform_display *that); + + /* And a callback to set the transform on the current png_read_struct: + */ + void (*set)(PNG_CONST struct image_transform *this, + struct transform_display *that, png_structp pp, png_infop pi); + + /* Then a transform that takes an input pixel in one PNG format or another + * and modifies it by a pngvalid implementation of the transform (thus + * duplicating the libpng intent without, we hope, duplicating the bugs + * in the libpng implementation!) The png_structp is solely to allow error + * reporting via png_error and png_warning. + */ + void (*mod)(PNG_CONST struct image_transform *this, image_pixel *that, + png_const_structp pp, PNG_CONST struct transform_display *display); + + /* Add this transform to the list and return true if the transform is + * meaningful for this colour type and bit depth - if false then the + * transform should have no effect on the image so there's not a lot of + * point running it. + */ + int (*add)(struct image_transform *this, + PNG_CONST struct image_transform **that, png_byte colour_type, + png_byte bit_depth); +} image_transform; + +typedef struct transform_display +{ + standard_display this; + + /* Parameters */ + png_modifier* pm; + PNG_CONST image_transform* transform_list; + + /* Local variables */ + png_byte output_colour_type; + png_byte output_bit_depth; + + /* Modifications (not necessarily used.) */ + gama_modification gama_mod; + chrm_modification chrm_mod; + srgb_modification srgb_mod; +} transform_display; + +/* Set sRGB, cHRM and gAMA transforms as required by the current encoding. */ +static void +transform_set_encoding(transform_display *this) +{ + /* Set up the png_modifier '_current' fields then use these to determine how + * to add appropriate chunks. + */ + png_modifier *pm = this->pm; + + modifier_set_encoding(pm); + + if (modifier_color_encoding_is_set(pm)) + { + if (modifier_color_encoding_is_sRGB(pm)) + srgb_modification_init(&this->srgb_mod, pm, PNG_sRGB_INTENT_ABSOLUTE); + + else + { + /* Set gAMA and cHRM separately. */ + gama_modification_init(&this->gama_mod, pm, pm->current_gamma); + + if (pm->current_encoding != 0) + chrm_modification_init(&this->chrm_mod, pm, pm->current_encoding); + } + } +} + +/* Three functions to end the list: */ +static void +image_transform_ini_end(PNG_CONST image_transform *this, + transform_display *that) +{ + UNUSED(this) + UNUSED(that) +} + +static void +image_transform_set_end(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + UNUSED(this) + UNUSED(that) + UNUSED(pp) + UNUSED(pi) +} + +/* At the end of the list recalculate the output image pixel value from the + * double precision values set up by the preceding 'mod' calls: + */ +static unsigned int +sample_scale(double sample_value, unsigned int scale) +{ + sample_value = floor(sample_value * scale + .5); + + /* Return NaN as 0: */ + if (!(sample_value > 0)) + sample_value = 0; + else if (sample_value > scale) + sample_value = scale; + + return (unsigned int)sample_value; +} + +static void +image_transform_mod_end(PNG_CONST image_transform *this, image_pixel *that, + png_const_structp pp, PNG_CONST transform_display *display) +{ + PNG_CONST unsigned int scale = (1U<sample_depth)-1; + + UNUSED(this) + UNUSED(pp) + UNUSED(display) + + /* At the end recalculate the digitized red green and blue values according + * to the current sample_depth of the pixel. + * + * The sample value is simply scaled to the maximum, checking for over + * and underflow (which can both happen for some image transforms, + * including simple size scaling, though libpng doesn't do that at present. + */ + that->red = sample_scale(that->redf, scale); + + /* The error value is increased, at the end, according to the lowest sBIT + * value seen. Common sense tells us that the intermediate integer + * representations are no more accurate than +/- 0.5 in the integral values, + * the sBIT allows the implementation to be worse than this. In addition the + * PNG specification actually permits any error within the range (-1..+1), + * but that is ignored here. Instead the final digitized value is compared, + * below to the digitized value of the error limits - this has the net effect + * of allowing (almost) +/-1 in the output value. It's difficult to see how + * any algorithm that digitizes intermediate results can be more accurate. + */ + that->rede += 1./(2*((1U<red_sBIT)-1)); + + if (that->colour_type & PNG_COLOR_MASK_COLOR) + { + that->green = sample_scale(that->greenf, scale); + that->blue = sample_scale(that->bluef, scale); + that->greene += 1./(2*((1U<green_sBIT)-1)); + that->bluee += 1./(2*((1U<blue_sBIT)-1)); + } + else + { + that->blue = that->green = that->red; + that->bluef = that->greenf = that->redf; + that->bluee = that->greene = that->rede; + } + + if ((that->colour_type & PNG_COLOR_MASK_ALPHA) || + that->colour_type == PNG_COLOR_TYPE_PALETTE) + { + that->alpha = sample_scale(that->alphaf, scale); + that->alphae += 1./(2*((1U<alpha_sBIT)-1)); + } + else + { + that->alpha = scale; /* opaque */ + that->alpha = 1; /* Override this. */ + that->alphae = 0; /* It's exact ;-) */ + } +} + +/* Static 'end' structure: */ +static image_transform image_transform_end = +{ + "(end)", /* name */ + 1, /* enable */ + 0, /* list */ + 0, /* global_use */ + 0, /* local_use */ + 0, /* next */ + image_transform_ini_end, + image_transform_set_end, + image_transform_mod_end, + 0 /* never called, I want it to crash if it is! */ +}; + +/* Reader callbacks and implementations, where they differ from the standard + * ones. + */ +static void +transform_display_init(transform_display *dp, png_modifier *pm, png_uint_32 id, + PNG_CONST image_transform *transform_list) +{ + memset(dp, 0, sizeof *dp); + + /* Standard fields */ + standard_display_init(&dp->this, &pm->this, id, 0/*do_interlace*/, + pm->use_update_info); + + /* Parameter fields */ + dp->pm = pm; + dp->transform_list = transform_list; + + /* Local variable fields */ + dp->output_colour_type = 255; /* invalid */ + dp->output_bit_depth = 255; /* invalid */ +} + +static void +transform_info_imp(transform_display *dp, png_structp pp, png_infop pi) +{ + /* Reuse the standard stuff as appropriate. */ + standard_info_part1(&dp->this, pp, pi); + + /* Now set the list of transforms. */ + dp->transform_list->set(dp->transform_list, dp, pp, pi); + + /* Update the info structure for these transforms: */ + { + int i = dp->this.use_update_info; + /* Always do one call, even if use_update_info is 0. */ + do + png_read_update_info(pp, pi); + while (--i > 0); + } + + /* And get the output information into the standard_display */ + standard_info_part2(&dp->this, pp, pi, 1/*images*/); + + /* Plus the extra stuff we need for the transform tests: */ + dp->output_colour_type = png_get_color_type(pp, pi); + dp->output_bit_depth = png_get_bit_depth(pp, pi); + + /* Validate the combination of colour type and bit depth that we are getting + * out of libpng; the semantics of something not in the PNG spec are, at + * best, unclear. + */ + switch (dp->output_colour_type) + { + case PNG_COLOR_TYPE_PALETTE: + if (dp->output_bit_depth > 8) goto error; + /*FALL THROUGH*/ + case PNG_COLOR_TYPE_GRAY: + if (dp->output_bit_depth == 1 || dp->output_bit_depth == 2 || + dp->output_bit_depth == 4) + break; + /*FALL THROUGH*/ + default: + if (dp->output_bit_depth == 8 || dp->output_bit_depth == 16) + break; + /*FALL THROUGH*/ + error: + { + char message[128]; + size_t pos; + + pos = safecat(message, sizeof message, 0, + "invalid final bit depth: colour type("); + pos = safecatn(message, sizeof message, pos, dp->output_colour_type); + pos = safecat(message, sizeof message, pos, ") with bit depth: "); + pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); + + png_error(pp, message); + } + } + + /* Use a test pixel to check that the output agrees with what we expect - + * this avoids running the whole test if the output is unexpected. + */ + { + image_pixel test_pixel; + + memset(&test_pixel, 0, sizeof test_pixel); + test_pixel.colour_type = dp->this.colour_type; /* input */ + test_pixel.bit_depth = dp->this.bit_depth; + if (test_pixel.colour_type == PNG_COLOR_TYPE_PALETTE) + test_pixel.sample_depth = 8; + else + test_pixel.sample_depth = test_pixel.bit_depth; + /* Don't need sBIT here, but it must be set to non-zero to avoid + * arithmetic overflows. + */ + test_pixel.have_tRNS = dp->this.is_transparent; + test_pixel.red_sBIT = test_pixel.green_sBIT = test_pixel.blue_sBIT = + test_pixel.alpha_sBIT = test_pixel.sample_depth; + + dp->transform_list->mod(dp->transform_list, &test_pixel, pp, dp); + + if (test_pixel.colour_type != dp->output_colour_type) + { + char message[128]; + size_t pos = safecat(message, sizeof message, 0, "colour type "); + + pos = safecatn(message, sizeof message, pos, dp->output_colour_type); + pos = safecat(message, sizeof message, pos, " expected "); + pos = safecatn(message, sizeof message, pos, test_pixel.colour_type); + + png_error(pp, message); + } + + if (test_pixel.bit_depth != dp->output_bit_depth) + { + char message[128]; + size_t pos = safecat(message, sizeof message, 0, "bit depth "); + + pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); + pos = safecat(message, sizeof message, pos, " expected "); + pos = safecatn(message, sizeof message, pos, test_pixel.bit_depth); + + png_error(pp, message); + } + + /* If both bit depth and colour type are correct check the sample depth. + * I believe these are both internal errors. + */ + if (test_pixel.colour_type == PNG_COLOR_TYPE_PALETTE) + { + if (test_pixel.sample_depth != 8) /* oops - internal error! */ + png_error(pp, "pngvalid: internal: palette sample depth not 8"); + } + else if (test_pixel.sample_depth != dp->output_bit_depth) + { + char message[128]; + size_t pos = safecat(message, sizeof message, 0, + "internal: sample depth "); + + pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); + pos = safecat(message, sizeof message, pos, " expected "); + pos = safecatn(message, sizeof message, pos, test_pixel.sample_depth); + + png_error(pp, message); + } + } +} + +static void +transform_info(png_structp pp, png_infop pi) +{ + transform_info_imp(voidcast(transform_display*, png_get_progressive_ptr(pp)), + pp, pi); +} + +static void +transform_range_check(png_const_structp pp, unsigned int r, unsigned int g, + unsigned int b, unsigned int a, unsigned int in_digitized, double in, + unsigned int out, png_byte sample_depth, double err, double limit, + PNG_CONST char *name, double digitization_error) +{ + /* Compare the scaled, digitzed, values of our local calculation (in+-err) + * with the digitized values libpng produced; 'sample_depth' is the actual + * digitization depth of the libpng output colors (the bit depth except for + * palette images where it is always 8.) The check on 'err' is to detect + * internal errors in pngvalid itself. + */ + unsigned int max = (1U< limit || !(out >= in_min && out <= in_max)) + { + char message[256]; + size_t pos; + + pos = safecat(message, sizeof message, 0, name); + pos = safecat(message, sizeof message, pos, " output value error: rgba("); + pos = safecatn(message, sizeof message, pos, r); + pos = safecat(message, sizeof message, pos, ","); + pos = safecatn(message, sizeof message, pos, g); + pos = safecat(message, sizeof message, pos, ","); + pos = safecatn(message, sizeof message, pos, b); + pos = safecat(message, sizeof message, pos, ","); + pos = safecatn(message, sizeof message, pos, a); + pos = safecat(message, sizeof message, pos, "): "); + pos = safecatn(message, sizeof message, pos, out); + pos = safecat(message, sizeof message, pos, " expected: "); + pos = safecatn(message, sizeof message, pos, in_digitized); + pos = safecat(message, sizeof message, pos, " ("); + pos = safecatd(message, sizeof message, pos, (in-err)*max, 3); + pos = safecat(message, sizeof message, pos, ".."); + pos = safecatd(message, sizeof message, pos, (in+err)*max, 3); + pos = safecat(message, sizeof message, pos, ")"); + + png_error(pp, message); + } +} + +static void +transform_image_validate(transform_display *dp, png_const_structp pp, + png_infop pi) +{ + /* Constants for the loop below: */ + PNG_CONST png_store* PNG_CONST ps = dp->this.ps; + PNG_CONST png_byte in_ct = dp->this.colour_type; + PNG_CONST png_byte in_bd = dp->this.bit_depth; + PNG_CONST png_uint_32 w = dp->this.w; + PNG_CONST png_uint_32 h = dp->this.h; + PNG_CONST png_byte out_ct = dp->output_colour_type; + PNG_CONST png_byte out_bd = dp->output_bit_depth; + PNG_CONST png_byte sample_depth = (png_byte)(out_ct == + PNG_COLOR_TYPE_PALETTE ? 8 : out_bd); + PNG_CONST png_byte red_sBIT = dp->this.red_sBIT; + PNG_CONST png_byte green_sBIT = dp->this.green_sBIT; + PNG_CONST png_byte blue_sBIT = dp->this.blue_sBIT; + PNG_CONST png_byte alpha_sBIT = dp->this.alpha_sBIT; + PNG_CONST int have_tRNS = dp->this.is_transparent; + double digitization_error; + + store_palette out_palette; + png_uint_32 y; + + UNUSED(pi) + + /* Check for row overwrite errors */ + store_image_check(dp->this.ps, pp, 0); + + /* Read the palette corresponding to the output if the output colour type + * indicates a palette, othewise set out_palette to garbage. + */ + if (out_ct == PNG_COLOR_TYPE_PALETTE) + { + /* Validate that the palette count itself has not changed - this is not + * expected. + */ + int npalette = (-1); + + (void)read_palette(out_palette, &npalette, pp, pi); + if (npalette != dp->this.npalette) + png_error(pp, "unexpected change in palette size"); + + digitization_error = .5; + } + else + { + png_byte in_sample_depth; + + memset(out_palette, 0x5e, sizeof out_palette); + + /* assume-8-bit-calculations means assume that if the input has 8 bit + * (or less) samples and the output has 16 bit samples the calculations + * will be done with 8 bit precision, not 16. + * + * TODO: fix this in libpng; png_set_expand_16 should cause 16 bit + * calculations to be used throughout. + */ + if (in_ct == PNG_COLOR_TYPE_PALETTE || in_bd < 16) + in_sample_depth = 8; + else + in_sample_depth = in_bd; + + if (sample_depth != 16 || in_sample_depth > 8 || + !dp->pm->calculations_use_input_precision) + digitization_error = .5; + + /* Else errors are at 8 bit precision, scale .5 in 8 bits to the 16 bits: + */ + else + digitization_error = .5 * 257; + } + + for (y=0; ythis.palette); + + in_pixel.red_sBIT = red_sBIT; + in_pixel.green_sBIT = green_sBIT; + in_pixel.blue_sBIT = blue_sBIT; + in_pixel.alpha_sBIT = alpha_sBIT; + in_pixel.have_tRNS = have_tRNS; + + /* For error detection, below. */ + r = in_pixel.red; + g = in_pixel.green; + b = in_pixel.blue; + a = in_pixel.alpha; + + dp->transform_list->mod(dp->transform_list, &in_pixel, pp, dp); + + /* Read the output pixel and compare it to what we got, we don't + * use the error field here, so no need to update sBIT. + */ + image_pixel_init(&out_pixel, pRow, out_ct, out_bd, x, out_palette); + + /* We don't expect changes to the index here even if the bit depth is + * changed. + */ + if (in_ct == PNG_COLOR_TYPE_PALETTE && + out_ct == PNG_COLOR_TYPE_PALETTE) + { + if (in_pixel.palette_index != out_pixel.palette_index) + png_error(pp, "unexpected transformed palette index"); + } + + /* Check the colours for palette images too - in fact the palette could + * be separately verified itself in most cases. + */ + if (in_pixel.red != out_pixel.red) + transform_range_check(pp, r, g, b, a, in_pixel.red, in_pixel.redf, + out_pixel.red, sample_depth, in_pixel.rede, + dp->pm->limit + 1./(2*((1U<pm->limit + 1./(2*((1U<pm->limit + 1./(2*((1U<pm->limit + 1./(2*((1U<this.ps->validated = 1; +} + +static void +transform_end(png_structp ppIn, png_infop pi) +{ + png_const_structp pp = ppIn; + transform_display *dp = voidcast(transform_display*, + png_get_progressive_ptr(pp)); + + if (!dp->this.speed) + transform_image_validate(dp, pp, pi); + else + dp->this.ps->validated = 1; +} + +/* A single test run. */ +static void +transform_test(png_modifier *pmIn, PNG_CONST png_uint_32 idIn, + PNG_CONST image_transform* transform_listIn, PNG_CONST char * volatile name) +{ + transform_display d; + context(&pmIn->this, fault); + + transform_display_init(&d, pmIn, idIn, transform_listIn); + + Try + { + size_t pos = 0; + png_structp pp; + png_infop pi; + char full_name[256]; + + /* Make sure the encoding fields are correct and enter the required + * modifications. + */ + transform_set_encoding(&d); + + /* Add any modifications required by the transform list. */ + d.transform_list->ini(d.transform_list, &d); + + /* Add the color space information, if any, to the name. */ + pos = safecat(full_name, sizeof full_name, pos, name); + pos = safecat_current_encoding(full_name, sizeof full_name, pos, d.pm); + + /* Get a png_struct for reading the image. */ + pp = set_modifier_for_read(d.pm, &pi, d.this.id, full_name); + standard_palette_init(&d.this); + +# if 0 + /* Logging (debugging only) */ + { + char buffer[256]; + + (void)store_message(&d.pm->this, pp, buffer, sizeof buffer, 0, + "running test"); + + fprintf(stderr, "%s\n", buffer); + } +# endif + + /* Introduce the correct read function. */ + if (d.pm->this.progressive) + { + /* Share the row function with the standard implementation. */ + png_set_progressive_read_fn(pp, &d, transform_info, progressive_row, + transform_end); + + /* Now feed data into the reader until we reach the end: */ + modifier_progressive_read(d.pm, pp, pi); + } + else + { + /* modifier_read expects a png_modifier* */ + png_set_read_fn(pp, d.pm, modifier_read); + + /* Check the header values: */ + png_read_info(pp, pi); + + /* Process the 'info' requirements. Only one image is generated */ + transform_info_imp(&d, pp, pi); + + sequential_row(&d.this, pp, pi, -1, 0); + + if (!d.this.speed) + transform_image_validate(&d, pp, pi); + else + d.this.ps->validated = 1; + } + + modifier_reset(d.pm); + } + + Catch(fault) + { + modifier_reset((png_modifier*)fault); + } +} + +/* The transforms: */ +#define ITSTRUCT(name) image_transform_##name +#define ITDATA(name) image_transform_data_##name +#define image_transform_ini image_transform_default_ini +#define IT(name)\ +static image_transform ITSTRUCT(name) =\ +{\ + #name,\ + 1, /*enable*/\ + &PT, /*list*/\ + 0, /*global_use*/\ + 0, /*local_use*/\ + 0, /*next*/\ + image_transform_ini,\ + image_transform_png_set_##name##_set,\ + image_transform_png_set_##name##_mod,\ + image_transform_png_set_##name##_add\ +} +#define PT ITSTRUCT(end) /* stores the previous transform */ + +/* To save code: */ +static void +image_transform_default_ini(PNG_CONST image_transform *this, + transform_display *that) +{ + this->next->ini(this->next, that); +} + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +static int +image_transform_default_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return 1; +} +#endif + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* png_set_palette_to_rgb */ +static void +image_transform_png_set_palette_to_rgb_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_palette_to_rgb(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_palette_to_rgb_mod(PNG_CONST image_transform *this, + image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that); + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_palette_to_rgb_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return colour_type == PNG_COLOR_TYPE_PALETTE; +} + +IT(palette_to_rgb); +#undef PT +#define PT ITSTRUCT(palette_to_rgb) +#endif /* PNG_READ_EXPAND_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* png_set_tRNS_to_alpha */ +static void +image_transform_png_set_tRNS_to_alpha_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_tRNS_to_alpha(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_tRNS_to_alpha_mod(PNG_CONST image_transform *this, + image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + /* LIBPNG BUG: this always forces palette images to RGB. */ + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that); + + /* This effectively does an 'expand' only if there is some transparency to + * convert to an alpha channel. + */ + if (that->have_tRNS) + image_pixel_add_alpha(that, &display->this); + + /* LIBPNG BUG: otherwise libpng still expands to 8 bits! */ + else + { + if (that->bit_depth < 8) + that->bit_depth =8; + if (that->sample_depth < 8) + that->sample_depth = 8; + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_tRNS_to_alpha_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + /* We don't know yet whether there will be a tRNS chunk, but we know that + * this transformation should do nothing if there already is an alpha + * channel. + */ + return (colour_type & PNG_COLOR_MASK_ALPHA) == 0; +} + +IT(tRNS_to_alpha); +#undef PT +#define PT ITSTRUCT(tRNS_to_alpha) +#endif /* PNG_READ_EXPAND_SUPPORTED */ + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +/* png_set_gray_to_rgb */ +static void +image_transform_png_set_gray_to_rgb_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_gray_to_rgb(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_gray_to_rgb_mod(PNG_CONST image_transform *this, + image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + /* NOTE: we can actually pend the tRNS processing at this point because we + * can correctly recognize the original pixel value even though we have + * mapped the one gray channel to the three RGB ones, but in fact libpng + * doesn't do this, so we don't either. + */ + if ((that->colour_type & PNG_COLOR_MASK_COLOR) == 0 && that->have_tRNS) + image_pixel_add_alpha(that, &display->this); + + /* Simply expand the bit depth and alter the colour type as required. */ + if (that->colour_type == PNG_COLOR_TYPE_GRAY) + { + /* RGB images have a bit depth at least equal to '8' */ + if (that->bit_depth < 8) + that->sample_depth = that->bit_depth = 8; + + /* And just changing the colour type works here because the green and blue + * channels are being maintained in lock-step with the red/gray: + */ + that->colour_type = PNG_COLOR_TYPE_RGB; + } + + else if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) + that->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_gray_to_rgb_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return (colour_type & PNG_COLOR_MASK_COLOR) == 0; +} + +IT(gray_to_rgb); +#undef PT +#define PT ITSTRUCT(gray_to_rgb) +#endif /* PNG_READ_GRAY_TO_RGB_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* png_set_expand */ +static void +image_transform_png_set_expand_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_expand(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_expand_mod(PNG_CONST image_transform *this, + image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + /* The general expand case depends on what the colour type is: */ + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that); + else if (that->bit_depth < 8) /* grayscale */ + that->sample_depth = that->bit_depth = 8; + + if (that->have_tRNS) + image_pixel_add_alpha(that, &display->this); + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_expand_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + /* 'expand' should do nothing for RGBA or GA input - no tRNS and the bit + * depth is at least 8 already. + */ + return (colour_type & PNG_COLOR_MASK_ALPHA) == 0; +} + +IT(expand); +#undef PT +#define PT ITSTRUCT(expand) +#endif /* PNG_READ_EXPAND_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* png_set_expand_gray_1_2_4_to_8 + * LIBPNG BUG: this just does an 'expand' + */ +static void +image_transform_png_set_expand_gray_1_2_4_to_8_set( + PNG_CONST image_transform *this, transform_display *that, png_structp pp, + png_infop pi) +{ + png_set_expand_gray_1_2_4_to_8(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_expand_gray_1_2_4_to_8_mod( + PNG_CONST image_transform *this, image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + image_transform_png_set_expand_mod(this, that, pp, display); +} + +static int +image_transform_png_set_expand_gray_1_2_4_to_8_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + return image_transform_png_set_expand_add(this, that, colour_type, + bit_depth); +} + +IT(expand_gray_1_2_4_to_8); +#undef PT +#define PT ITSTRUCT(expand_gray_1_2_4_to_8) +#endif /* PNG_READ_EXPAND_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* png_set_expand_16 */ +static void +image_transform_png_set_expand_16_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_expand_16(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_expand_16_mod(PNG_CONST image_transform *this, + image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + /* Expect expand_16 to expand everything to 16 bits as a result of also + * causing 'expand' to happen. + */ + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that); + + if (that->have_tRNS) + image_pixel_add_alpha(that, &display->this); + + if (that->bit_depth < 16) + that->sample_depth = that->bit_depth = 16; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_expand_16_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + + this->next = *that; + *that = this; + + /* expand_16 does something unless the bit depth is already 16. */ + return bit_depth < 16; +} + +IT(expand_16); +#undef PT +#define PT ITSTRUCT(expand_16) +#endif /* PNG_READ_EXPAND_16_SUPPORTED */ + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED /* API added in 1.5.4 */ +/* png_set_scale_16 */ +static void +image_transform_png_set_scale_16_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_scale_16(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_scale_16_mod(PNG_CONST image_transform *this, + image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + if (that->bit_depth == 16) + { + that->sample_depth = that->bit_depth = 8; + if (that->red_sBIT > 8) that->red_sBIT = 8; + if (that->green_sBIT > 8) that->green_sBIT = 8; + if (that->blue_sBIT > 8) that->blue_sBIT = 8; + if (that->alpha_sBIT > 8) that->alpha_sBIT = 8; + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_scale_16_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + + this->next = *that; + *that = this; + + return bit_depth > 8; +} + +IT(scale_16); +#undef PT +#define PT ITSTRUCT(scale_16) +#endif /* PNG_READ_SCALE_16_TO_8_SUPPORTED (1.5.4 on) */ + +#ifdef PNG_READ_16_TO_8_SUPPORTED /* the default before 1.5.4 */ +/* png_set_strip_16 */ +static void +image_transform_png_set_strip_16_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_strip_16(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_strip_16_mod(PNG_CONST image_transform *this, + image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + if (that->bit_depth == 16) + { + that->sample_depth = that->bit_depth = 8; + if (that->red_sBIT > 8) that->red_sBIT = 8; + if (that->green_sBIT > 8) that->green_sBIT = 8; + if (that->blue_sBIT > 8) that->blue_sBIT = 8; + if (that->alpha_sBIT > 8) that->alpha_sBIT = 8; + + /* Prior to 1.5.4 png_set_strip_16 would use an 'accurate' method if this + * configuration option is set. From 1.5.4 the flag is never set and the + * 'scale' API (above) must be used. + */ +# ifdef PNG_READ_ACCURATE_SCALE_SUPPORTED +# if PNG_LIBPNG_VER >= 10504 +# error PNG_READ_ACCURATE_SCALE should not be set +# endif + + /* The strip 16 algorithm drops the low 8 bits rather than calculating + * 1/257, so we need to adjust the permitted errors appropriately: + * Notice that this is only relevant prior to the addition of the + * png_set_scale_16 API in 1.5.4 (but 1.5.4+ always defines the above!) + */ + { + PNG_CONST double d = (255-128.5)/65535; + that->rede += d; + that->greene += d; + that->bluee += d; + that->alphae += d; + } +# endif + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_strip_16_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + + this->next = *that; + *that = this; + + return bit_depth > 8; +} + +IT(strip_16); +#undef PT +#define PT ITSTRUCT(strip_16) +#endif /* PNG_READ_16_TO_8_SUPPORTED */ + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED +/* png_set_strip_alpha */ +static void +image_transform_png_set_strip_alpha_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_strip_alpha(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_strip_alpha_mod(PNG_CONST image_transform *this, + image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) + that->colour_type = PNG_COLOR_TYPE_GRAY; + else if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) + that->colour_type = PNG_COLOR_TYPE_RGB; + + that->have_tRNS = 0; + that->alphaf = 1; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_strip_alpha_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return (colour_type & PNG_COLOR_MASK_ALPHA) != 0; +} + +IT(strip_alpha); +#undef PT +#define PT ITSTRUCT(strip_alpha) +#endif /* PNG_READ_STRIP_ALPHA_SUPPORTED */ + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +/* png_set_rgb_to_gray(png_structp, int err_action, double red, double green) + * png_set_rgb_to_gray_fixed(png_structp, int err_action, png_fixed_point red, + * png_fixed_point green) + * png_get_rgb_to_gray_status + * + * The 'default' test here uses values known to be used inside libpng: + * + * red: 6968 + * green: 23434 + * blue: 2366 + * + * These values are being retained for compatibility, along with the somewhat + * broken truncation calculation in the fast-and-inaccurate code path. Older + * versions of libpng will fail the accuracy tests below because they use the + * truncation algorithm everywhere. + */ +#define data ITDATA(rgb_to_gray) +static struct +{ + double gamma; /* File gamma to use in processing */ + + /* The following are the parameters for png_set_rgb_to_gray: */ +# ifdef PNG_FLOATING_POINT_SUPPORTED + double red_to_set; + double green_to_set; +# else + png_fixed_point red_to_set; + png_fixed_point green_to_set; +# endif + + /* The actual coefficients: */ + double red_coefficient; + double green_coefficient; + double blue_coefficient; + + /* Set if the coeefficients have been overridden. */ + int coefficients_overridden; +} data; + +#undef image_transform_ini +#define image_transform_ini image_transform_png_set_rgb_to_gray_ini +static void +image_transform_png_set_rgb_to_gray_ini(PNG_CONST image_transform *this, + transform_display *that) +{ + png_modifier *pm = that->pm; + PNG_CONST color_encoding *e = pm->current_encoding; + + UNUSED(this) + + /* Since we check the encoding this flag must be set: */ + pm->test_uses_encoding = 1; + + /* If 'e' is not NULL chromaticity information is present and either a cHRM + * or an sRGB chunk will be inserted. + */ + if (e != 0) + { + /* Coefficients come from the encoding, but may need to be normalized to a + * white point Y of 1.0 + */ + PNG_CONST double whiteY = e->red.Y + e->green.Y + e->blue.Y; + + data.red_coefficient = e->red.Y; + data.green_coefficient = e->green.Y; + data.blue_coefficient = e->blue.Y; + + if (whiteY != 1) + { + data.red_coefficient /= whiteY; + data.green_coefficient /= whiteY; + data.blue_coefficient /= whiteY; + } + } + + else + { + /* The default (built in) coeffcients, as above: */ + data.red_coefficient = 6968 / 32768.; + data.green_coefficient = 23434 / 32768.; + data.blue_coefficient = 2366 / 32768.; + } + + data.gamma = pm->current_gamma; + + /* If not set then the calculations assume linear encoding (implicitly): */ + if (data.gamma == 0) + data.gamma = 1; + + /* The arguments to png_set_rgb_to_gray can override the coefficients implied + * by the color space encoding. If doing exhaustive checks do the override + * in each case, otherwise do it randomly. + */ + if (pm->test_exhaustive) + { + /* First time in coefficients_overridden is 0, the following sets it to 1, + * so repeat if it is set. If a test fails this may mean we subsequently + * skip a non-override test, ignore that. + */ + data.coefficients_overridden = !data.coefficients_overridden; + pm->repeat = data.coefficients_overridden != 0; + } + + else + data.coefficients_overridden = random_choice(); + + if (data.coefficients_overridden) + { + /* These values override the color encoding defaults, simply use random + * numbers. + */ + png_uint_32 ru; + double total; + + RANDOMIZE(ru); + data.green_coefficient = total = (ru & 0xffff) / 65535.; + ru >>= 16; + data.red_coefficient = (1 - total) * (ru & 0xffff) / 65535.; + total += data.red_coefficient; + data.blue_coefficient = 1 - total; + +# ifdef PNG_FLOATING_POINT_SUPPORTED + data.red_to_set = data.red_coefficient; + data.green_to_set = data.green_coefficient; +# else + data.red_to_set = fix(data.red_coefficient); + data.green_to_set = fix(data.green_coefficient); +# endif + + /* The following just changes the error messages: */ + pm->encoding_ignored = 1; + } + + else + { + data.red_to_set = -1; + data.green_to_set = -1; + } + + /* Adjust the error limit in the png_modifier because of the larger errors + * produced in the digitization during the gamma handling. + */ + if (data.gamma != 1) /* Use gamma tables */ + { + if (that->this.bit_depth == 16 || pm->assume_16_bit_calculations) + { + /* The 16 bit case ends up producing a maximum error of about + * +/-5 in 65535, allow for +/-8 with the given gamma. + */ + that->pm->limit += pow(8./65535, data.gamma); + } + + else + { + /* Rounding to 8 bits in the linear space causes massive errors which + * will trigger the error check in transform_range_check. Fix that + * here by taking the gamma encoding into account. + */ + that->pm->limit += pow(1./255, data.gamma); + } + } + + else + { + /* With no gamma correction a large error comes from the truncation of the + * calculation in the 8 bit case, allow for that here. + */ + if (that->this.bit_depth != 16) + that->pm->limit += 4E-3; + } +} + +static void +image_transform_png_set_rgb_to_gray_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + PNG_CONST int error_action = 1; /* no error, no defines in png.h */ + +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_rgb_to_gray(pp, error_action, data.red_to_set, data.green_to_set); +# else + png_set_rgb_to_gray_fixed(pp, error_action, data.red_to_set, + data.green_to_set); +# endif + +# ifdef PNG_READ_cHRM_SUPPORTED + if (that->pm->current_encoding != 0) + { + /* We have an encoding so a cHRM chunk may have been set; if so then + * check that the libpng APIs give the correct (X,Y,Z) values within + * some margin of error for the round trip through the chromaticity + * form. + */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +# define API_function png_get_cHRM_XYZ +# define API_form "FP" +# define API_type double +# define API_cvt(x) (x) +# else +# define API_function png_get_cHRM_XYZ_fixed +# define API_form "fixed" +# define API_type png_fixed_point +# define API_cvt(x) ((double)(x)/PNG_FP_1) +# endif + + API_type rX, gX, bX; + API_type rY, gY, bY; + API_type rZ, gZ, bZ; + + if ((API_function(pp, pi, &rX, &rY, &rZ, &gX, &gY, &gZ, &bX, &bY, &bZ) + & PNG_INFO_cHRM) != 0) + { + double maxe; + PNG_CONST char *el; + color_encoding e, o; + + /* Expect libpng to return a normalized result, but the original + * color space encoding may not be normalized. + */ + modifier_current_encoding(that->pm, &o); + normalize_color_encoding(&o); + + /* Sanity check the pngvalid code - the coefficients should match + * the normalized Y values of the encoding unless they were + * overridden. + */ + if (data.red_to_set == -1 && data.green_to_set == -1 && + (fabs(o.red.Y - data.red_coefficient) > DBL_EPSILON || + fabs(o.green.Y - data.green_coefficient) > DBL_EPSILON || + fabs(o.blue.Y - data.blue_coefficient) > DBL_EPSILON)) + png_error(pp, "internal pngvalid cHRM coefficient error"); + + /* Generate a colour space encoding. */ + e.gamma = o.gamma; /* not used */ + e.red.X = API_cvt(rX); + e.red.Y = API_cvt(rY); + e.red.Z = API_cvt(rZ); + e.green.X = API_cvt(gX); + e.green.Y = API_cvt(gY); + e.green.Z = API_cvt(gZ); + e.blue.X = API_cvt(bX); + e.blue.Y = API_cvt(bY); + e.blue.Z = API_cvt(bZ); + + /* This should match the original one from the png_modifier, within + * the range permitted by the libpng fixed point representation. + */ + maxe = 0; + el = "-"; /* Set to element name with error */ + +# define CHECK(col,x)\ + {\ + double err = fabs(o.col.x - e.col.x);\ + if (err > maxe)\ + {\ + maxe = err;\ + el = #col "(" #x ")";\ + }\ + } + + CHECK(red,X) + CHECK(red,Y) + CHECK(red,Z) + CHECK(green,X) + CHECK(green,Y) + CHECK(green,Z) + CHECK(blue,X) + CHECK(blue,Y) + CHECK(blue,Z) + + /* Here in both fixed and floating cases to check the values read + * from the cHRm chunk. PNG uses fixed point in the cHRM chunk, so + * we can't expect better than +/-.5E-5 on the result, allow 1E-5. + */ + if (maxe >= 1E-5) + { + size_t pos = 0; + char buffer[256]; + + pos = safecat(buffer, sizeof buffer, pos, API_form); + pos = safecat(buffer, sizeof buffer, pos, " cHRM "); + pos = safecat(buffer, sizeof buffer, pos, el); + pos = safecat(buffer, sizeof buffer, pos, " error: "); + pos = safecatd(buffer, sizeof buffer, pos, maxe, 7); + pos = safecat(buffer, sizeof buffer, pos, " "); + /* Print the color space without the gamma value: */ + pos = safecat_color_encoding(buffer, sizeof buffer, pos, &o, 0); + pos = safecat(buffer, sizeof buffer, pos, " -> "); + pos = safecat_color_encoding(buffer, sizeof buffer, pos, &e, 0); + + png_error(pp, buffer); + } + } + } +# endif /* READ_cHRM */ + + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_rgb_to_gray_mod(PNG_CONST image_transform *this, + image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + if ((that->colour_type & PNG_COLOR_MASK_COLOR) != 0) + { + double gray, err; + + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that); + + /* Image now has RGB channels... */ + { + PNG_CONST png_modifier *pm = display->pm; + PNG_CONST unsigned int sample_depth = that->sample_depth; + int isgray; + double r, g, b; + double rlo, rhi, glo, ghi, blo, bhi, graylo, grayhi; + + /* Do this using interval arithmetic, otherwise it is too difficult to + * handle the errors correctly. + * + * To handle the gamma correction work out the upper and lower bounds + * of the digitized value. Assume rounding here - normally the values + * will be identical after this operation if there is only one + * transform, feel free to delete the png_error checks on this below in + * the future (this is just me trying to ensure it works!) + */ + r = rlo = rhi = that->redf; + rlo -= that->rede; + rlo = digitize(pm, rlo, sample_depth, 1/*round*/); + rhi += that->rede; + rhi = digitize(pm, rhi, sample_depth, 1/*round*/); + + g = glo = ghi = that->greenf; + glo -= that->greene; + glo = digitize(pm, glo, sample_depth, 1/*round*/); + ghi += that->greene; + ghi = digitize(pm, ghi, sample_depth, 1/*round*/); + + b = blo = bhi = that->bluef; + blo -= that->bluee; + blo = digitize(pm, blo, sample_depth, 1/*round*/); + bhi += that->greene; + bhi = digitize(pm, bhi, sample_depth, 1/*round*/); + + isgray = r==g && g==b; + + if (data.gamma != 1) + { + PNG_CONST double power = 1/data.gamma; + PNG_CONST double abse = abserr(pm, sample_depth, sample_depth); + + /* 'abse' is the absolute error permitted in linear calculations. It + * is used here to capture the error permitted in the handling + * (undoing) of the gamma encoding. Once again digitization occurs + * to handle the upper and lower bounds of the values. This is + * where the real errors are introduced. + */ + r = pow(r, power); + rlo = digitize(pm, pow(rlo, power)-abse, sample_depth, 1); + rhi = digitize(pm, pow(rhi, power)+abse, sample_depth, 1); + + g = pow(g, power); + glo = digitize(pm, pow(glo, power)-abse, sample_depth, 1); + ghi = digitize(pm, pow(ghi, power)+abse, sample_depth, 1); + + b = pow(b, power); + blo = digitize(pm, pow(blo, power)-abse, sample_depth, 1); + bhi = digitize(pm, pow(bhi, power)+abse, sample_depth, 1); + } + + /* Now calculate the actual gray values. Although the error in the + * coefficients depends on whether they were specified on the command + * line (in which case truncation to 15 bits happened) or not (rounding + * was used) the maxium error in an individual coefficient is always + * 1/32768, because even in the rounding case the requirement that + * coefficients add up to 32768 can cause a larger rounding error. + * + * The only time when rounding doesn't occur in 1.5.5 and later is when + * the non-gamma code path is used for less than 16 bit data. + */ + gray = r * data.red_coefficient + g * data.green_coefficient + + b * data.blue_coefficient; + + { + PNG_CONST int do_round = data.gamma != 1 || sample_depth == 16; + PNG_CONST double ce = 1. / 32768; + + graylo = digitize(pm, rlo * (data.red_coefficient-ce) + + glo * (data.green_coefficient-ce) + + blo * (data.blue_coefficient-ce), sample_depth, do_round); + if (graylo <= 0) + graylo = 0; + + grayhi = digitize(pm, rhi * (data.red_coefficient+ce) + + ghi * (data.green_coefficient+ce) + + bhi * (data.blue_coefficient+ce), sample_depth, do_round); + if (grayhi >= 1) + grayhi = 1; + } + + /* And invert the gamma. */ + if (data.gamma != 1) + { + PNG_CONST double power = data.gamma; + + gray = pow(gray, power); + graylo = digitize(pm, pow(graylo, power), sample_depth, 1); + grayhi = digitize(pm, pow(grayhi, power), sample_depth, 1); + } + + /* Now the error can be calculated. + * + * If r==g==b because there is no overall gamma correction libpng + * currently preserves the original value. + */ + if (isgray) + err = (that->rede + that->greene + that->bluee)/3; + + else + { + err = fabs(grayhi-gray); + if (fabs(gray - graylo) > err) + err = fabs(graylo-gray); + + /* Check that this worked: */ + if (err > display->pm->limit) + { + size_t pos = 0; + char buffer[128]; + + pos = safecat(buffer, sizeof buffer, pos, "rgb_to_gray error "); + pos = safecatd(buffer, sizeof buffer, pos, err, 6); + pos = safecat(buffer, sizeof buffer, pos, " exceeds limit "); + pos = safecatd(buffer, sizeof buffer, pos, + display->pm->limit, 6); + png_error(pp, buffer); + } + } + } + + that->bluef = that->greenf = that->redf = gray; + that->bluee = that->greene = that->rede = err; + + /* The sBIT is the minium of the three colour channel sBITs. */ + if (that->red_sBIT > that->green_sBIT) + that->red_sBIT = that->green_sBIT; + if (that->red_sBIT > that->blue_sBIT) + that->red_sBIT = that->blue_sBIT; + that->blue_sBIT = that->green_sBIT = that->red_sBIT; + + /* And remove the colour bit in the type: */ + if (that->colour_type == PNG_COLOR_TYPE_RGB) + that->colour_type = PNG_COLOR_TYPE_GRAY; + else if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) + that->colour_type = PNG_COLOR_TYPE_GRAY_ALPHA; + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_rgb_to_gray_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return (colour_type & PNG_COLOR_MASK_COLOR) != 0; +} + +#undef data +IT(rgb_to_gray); +#undef PT +#define PT ITSTRUCT(rgb_to_gray) +#undef image_transform_ini +#define image_transform_ini image_transform_default_ini +#endif /* PNG_READ_RGB_TO_GRAY_SUPPORTED */ + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +/* png_set_background(png_structp, png_const_color_16p background_color, + * int background_gamma_code, int need_expand, double background_gamma) + * png_set_background_fixed(png_structp, png_const_color_16p background_color, + * int background_gamma_code, int need_expand, + * png_fixed_point background_gamma) + * + * As with rgb_to_gray this ignores the gamma (at present.) +*/ +#define data ITDATA(background) +static image_pixel data; + +static void +image_transform_png_set_background_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_byte colour_type, bit_depth; + png_byte random_bytes[8]; /* 8 bytes - 64 bits - the biggest pixel */ + png_color_16 back; + + /* We need a background colour, because we don't know exactly what transforms + * have been set we have to supply the colour in the original file format and + * so we need to know what that is! The background colour is stored in the + * transform_display. + */ + RANDOMIZE(random_bytes); + + /* Read the random value, for colour type 3 the background colour is actually + * expressed as a 24bit rgb, not an index. + */ + colour_type = that->this.colour_type; + if (colour_type == 3) + { + colour_type = PNG_COLOR_TYPE_RGB; + bit_depth = 8; + } + + else + bit_depth = that->this.bit_depth; + + image_pixel_init(&data, random_bytes, colour_type, + bit_depth, 0/*x*/, 0/*unused: palette*/); + + /* Extract the background colour from this image_pixel, but make sure the + * unused fields of 'back' are garbage. + */ + RANDOMIZE(back); + + if (colour_type & PNG_COLOR_MASK_COLOR) + { + back.red = (png_uint_16)data.red; + back.green = (png_uint_16)data.green; + back.blue = (png_uint_16)data.blue; + } + + else + back.gray = (png_uint_16)data.red; + +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_background(pp, &back, PNG_BACKGROUND_GAMMA_FILE, 1/*need expand*/, + 0); +# else + png_set_background_fixed(pp, &back, PNG_BACKGROUND_GAMMA_FILE, + 1/*need expand*/, 0); +# endif + + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_background_mod(PNG_CONST image_transform *this, + image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + /* Check for tRNS first: */ + if (that->have_tRNS && that->colour_type != PNG_COLOR_TYPE_PALETTE) + image_pixel_add_alpha(that, &display->this); + + /* This is only necessary if the alpha value is less than 1. */ + if (that->alphaf < 1) + { + /* Now we do the background calculation without any gamma correction. */ + if (that->alphaf <= 0) + { + that->redf = data.redf; + that->greenf = data.greenf; + that->bluef = data.bluef; + + that->rede = data.rede; + that->greene = data.greene; + that->bluee = data.bluee; + + that->red_sBIT= data.red_sBIT; + that->green_sBIT= data.green_sBIT; + that->blue_sBIT= data.blue_sBIT; + } + + else /* 0 < alpha < 1 */ + { + double alf = 1 - that->alphaf; + + that->redf = that->redf * that->alphaf + data.redf * alf; + that->rede = that->rede * that->alphaf + data.rede * alf + + DBL_EPSILON; + that->greenf = that->greenf * that->alphaf + data.greenf * alf; + that->greene = that->greene * that->alphaf + data.greene * alf + + DBL_EPSILON; + that->bluef = that->bluef * that->alphaf + data.bluef * alf; + that->bluee = that->bluee * that->alphaf + data.bluee * alf + + DBL_EPSILON; + } + + /* Remove the alpha type and set the alpha (not in that order.) */ + that->alphaf = 1; + that->alphae = 0; + + if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) + that->colour_type = PNG_COLOR_TYPE_RGB; + else if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) + that->colour_type = PNG_COLOR_TYPE_GRAY; + /* PNG_COLOR_TYPE_PALETTE is not changed */ + } + + this->next->mod(this->next, that, pp, display); +} + +#define image_transform_png_set_background_add image_transform_default_add + +#undef data +IT(background); +#undef PT +#define PT ITSTRUCT(background) +#endif /* PNG_READ_BACKGROUND_SUPPORTED */ + +/* This may just be 'end' if all the transforms are disabled! */ +static image_transform *PNG_CONST image_transform_first = &PT; + +static void +transform_enable(PNG_CONST char *name) +{ + /* Everything starts out enabled, so if we see an 'enable' disabled + * everything else the first time round. + */ + static int all_disabled = 0; + int found_it = 0; + image_transform *list = image_transform_first; + + while (list != &image_transform_end) + { + if (strcmp(list->name, name) == 0) + { + list->enable = 1; + found_it = 1; + } + else if (!all_disabled) + list->enable = 0; + + list = list->list; + } + + all_disabled = 1; + + if (!found_it) + { + fprintf(stderr, "pngvalid: --transform-enable=%s: unknown transform\n", + name); + exit(1); + } +} + +static void +transform_disable(PNG_CONST char *name) +{ + image_transform *list = image_transform_first; + + while (list != &image_transform_end) + { + if (strcmp(list->name, name) == 0) + { + list->enable = 0; + return; + } + + list = list->list; + } + + fprintf(stderr, "pngvalid: --transform-disable=%s: unknown transform\n", + name); + exit(1); +} + +static void +image_transform_reset_count(void) +{ + image_transform *next = image_transform_first; + int count = 0; + + while (next != &image_transform_end) + { + next->local_use = 0; + next->next = 0; + next = next->list; + ++count; + } + + /* This can only happen if we every have more than 32 transforms (excluding + * the end) in the list. + */ + if (count > 32) abort(); +} + +static int +image_transform_test_counter(png_uint_32 counter, unsigned int max) +{ + /* Test the list to see if there is any point contining, given a current + * counter and a 'max' value. + */ + image_transform *next = image_transform_first; + + while (next != &image_transform_end) + { + /* For max 0 or 1 continue until the counter overflows: */ + counter >>= 1; + + /* Continue if any entry hasn't reacked the max. */ + if (max > 1 && next->local_use < max) + return 1; + next = next->list; + } + + return max <= 1 && counter == 0; +} + +static png_uint_32 +image_transform_add(PNG_CONST image_transform **this, unsigned int max, + png_uint_32 counter, char *name, size_t sizeof_name, size_t *pos, + png_byte colour_type, png_byte bit_depth) +{ + for (;;) /* until we manage to add something */ + { + png_uint_32 mask; + image_transform *list; + + /* Find the next counter value, if the counter is zero this is the start + * of the list. This routine always returns the current counter (not the + * next) so it returns 0 at the end and expects 0 at the beginning. + */ + if (counter == 0) /* first time */ + { + image_transform_reset_count(); + if (max <= 1) + counter = 1; + else + counter = random_32(); + } + else /* advance the counter */ + { + switch (max) + { + case 0: ++counter; break; + case 1: counter <<= 1; break; + default: counter = random_32(); break; + } + } + + /* Now add all these items, if possible */ + *this = &image_transform_end; + list = image_transform_first; + mask = 1; + + /* Go through the whole list adding anything that the counter selects: */ + while (list != &image_transform_end) + { + if ((counter & mask) != 0 && list->enable && + (max == 0 || list->local_use < max)) + { + /* Candidate to add: */ + if (list->add(list, this, colour_type, bit_depth) || max == 0) + { + /* Added, so add to the name too. */ + *pos = safecat(name, sizeof_name, *pos, " +"); + *pos = safecat(name, sizeof_name, *pos, list->name); + } + + else + { + /* Not useful and max>0, so remove it from *this: */ + *this = list->next; + list->next = 0; + + /* And, since we know it isn't useful, stop it being added again + * in this run: + */ + list->local_use = max; + } + } + + mask <<= 1; + list = list->list; + } + + /* Now if anything was added we have something to do. */ + if (*this != &image_transform_end) + return counter; + + /* Nothing added, but was there anything in there to add? */ + if (!image_transform_test_counter(counter, max)) + return 0; + } +} + +#ifdef THIS_IS_THE_PROFORMA +static void +image_transform_png_set_@_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_@(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_@_mod(PNG_CONST image_transform *this, + image_pixel *that, png_const_structp pp, + PNG_CONST transform_display *display) +{ + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_@_add(image_transform *this, + PNG_CONST image_transform **that, char *name, size_t sizeof_name, + size_t *pos, png_byte colour_type, png_byte bit_depth) +{ + this->next = *that; + *that = this; + + *pos = safecat(name, sizeof_name, *pos, " +@"); + + return 1; +} + +IT(@); +#endif + +/* png_set_quantize(png_structp, png_colorp palette, int num_palette, + * int maximum_colors, png_const_uint_16p histogram, int full_quantize) + * + * Very difficult to validate this! + */ +/*NOTE: TBD NYI */ + +/* The data layout transforms are handled by swapping our own channel data, + * necessarily these need to happen at the end of the transform list because the + * semantic of the channels changes after these are executed. Some of these, + * like set_shift and set_packing, can't be done at present because they change + * the layout of the data at the sub-sample level so sample() won't get the + * right answer. + */ +/* png_set_invert_alpha */ +/*NOTE: TBD NYI */ + +/* png_set_bgr */ +/*NOTE: TBD NYI */ + +/* png_set_swap_alpha */ +/*NOTE: TBD NYI */ + +/* png_set_swap */ +/*NOTE: TBD NYI */ + +/* png_set_filler, (png_structp png_ptr, png_uint_32 filler, int flags)); */ +/*NOTE: TBD NYI */ + +/* png_set_add_alpha, (png_structp png_ptr, png_uint_32 filler, int flags)); */ +/*NOTE: TBD NYI */ + +/* png_set_packing */ +/*NOTE: TBD NYI */ + +/* png_set_packswap */ +/*NOTE: TBD NYI */ + +/* png_set_invert_mono */ +/*NOTE: TBD NYI */ + +/* png_set_shift(png_structp, png_const_color_8p true_bits) */ +/*NOTE: TBD NYI */ + +static void +perform_transform_test(png_modifier *pm) +{ + png_byte colour_type = 0; + png_byte bit_depth = 0; + unsigned int palette_number = 0; + + while (next_format(&colour_type, &bit_depth, &palette_number)) + { + png_uint_32 counter = 0; + size_t base_pos; + char name[64]; + + base_pos = safecat(name, sizeof name, 0, "transform:"); + + for (;;) + { + size_t pos = base_pos; + PNG_CONST image_transform *list = 0; + + /* 'max' is currently hardwired to '1'; this should be settable on the + * command line. + */ + counter = image_transform_add(&list, 1/*max*/, counter, + name, sizeof name, &pos, colour_type, bit_depth); + + if (counter == 0) + break; + + /* The command line can change this to checking interlaced images. */ + do + { + pm->repeat = 0; + transform_test(pm, FILEID(colour_type, bit_depth, palette_number, + pm->interlace_type, 0, 0, 0), list, name); + + if (fail(pm)) + return; + } + while (pm->repeat); + } + } +} +#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ + +/********************************* GAMMA TESTS ********************************/ +#ifdef PNG_READ_GAMMA_SUPPORTED +/* Reader callbacks and implementations, where they differ from the standard + * ones. + */ +typedef struct gamma_display +{ + standard_display this; + + /* Parameters */ + png_modifier* pm; + double file_gamma; + double screen_gamma; + double background_gamma; + png_byte sbit; + int threshold_test; + int use_input_precision; + int scale16; + int expand16; + int do_background; + png_color_16 background_color; + + /* Local variables */ + double maxerrout; + double maxerrpc; + double maxerrabs; +} gamma_display; + +#define ALPHA_MODE_OFFSET 4 + +static void +gamma_display_init(gamma_display *dp, png_modifier *pm, png_uint_32 id, + double file_gamma, double screen_gamma, png_byte sbit, int threshold_test, + int use_input_precision, int scale16, int expand16, + int do_background, PNG_CONST png_color_16 *pointer_to_the_background_color, + double background_gamma) +{ + /* Standard fields */ + standard_display_init(&dp->this, &pm->this, id, 0/*do_interlace*/, + pm->use_update_info); + + /* Parameter fields */ + dp->pm = pm; + dp->file_gamma = file_gamma; + dp->screen_gamma = screen_gamma; + dp->background_gamma = background_gamma; + dp->sbit = sbit; + dp->threshold_test = threshold_test; + dp->use_input_precision = use_input_precision; + dp->scale16 = scale16; + dp->expand16 = expand16; + dp->do_background = do_background; + if (do_background && pointer_to_the_background_color != 0) + dp->background_color = *pointer_to_the_background_color; + else + memset(&dp->background_color, 0, sizeof dp->background_color); + + /* Local variable fields */ + dp->maxerrout = dp->maxerrpc = dp->maxerrabs = 0; +} + +static void +gamma_info_imp(gamma_display *dp, png_structp pp, png_infop pi) +{ + /* Reuse the standard stuff as appropriate. */ + standard_info_part1(&dp->this, pp, pi); + + /* If requested strip 16 to 8 bits - this is handled automagically below + * because the output bit depth is read from the library. Note that there + * are interactions with sBIT but, internally, libpng makes sbit at most + * PNG_MAX_GAMMA_8 when doing the following. + */ + if (dp->scale16) +# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + png_set_scale_16(pp); +# else + /* The following works both in 1.5.4 and earlier versions: */ +# ifdef PNG_READ_16_TO_8_SUPPORTED + png_set_strip_16(pp); +# else + png_error(pp, "scale16 (16 to 8 bit conversion) not supported"); +# endif +# endif + + if (dp->expand16) +# ifdef PNG_READ_EXPAND_16_SUPPORTED + png_set_expand_16(pp); +# else + png_error(pp, "expand16 (8 to 16 bit conversion) not supported"); +# endif + + if (dp->do_background >= ALPHA_MODE_OFFSET) + { +# ifdef PNG_READ_ALPHA_MODE_SUPPORTED + { + /* This tests the alpha mode handling, if supported. */ + int mode = dp->do_background - ALPHA_MODE_OFFSET; + + /* The gamma value is the output gamma, and is in the standard, + * non-inverted, represenation. It provides a default for the PNG file + * gamma, but since the file has a gAMA chunk this does not matter. + */ + PNG_CONST double sg = dp->screen_gamma; +# ifndef PNG_FLOATING_POINT_SUPPORTED + PNG_CONST png_fixed_point g = fix(sg); +# endif + +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_alpha_mode(pp, mode, sg); +# else + png_set_alpha_mode_fixed(pp, mode, g); +# endif + + /* However, for the standard Porter-Duff algorithm the output defaults + * to be linear, so if the test requires non-linear output it must be + * corrected here. + */ + if (mode == PNG_ALPHA_STANDARD && sg != 1) + { +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_gamma(pp, sg, dp->file_gamma); +# else + png_fixed_point f = fix(dp->file_gamma); + png_set_gamma_fixed(pp, g, f); +# endif + } + } +# else + png_error(pp, "alpha mode handling not supported"); +# endif + } + + else + { + /* Set up gamma processing. */ +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_gamma(pp, dp->screen_gamma, dp->file_gamma); +# else + { + png_fixed_point s = fix(dp->screen_gamma); + png_fixed_point f = fix(dp->file_gamma); + png_set_gamma_fixed(pp, s, f); + } +# endif + + if (dp->do_background) + { +# ifdef PNG_READ_BACKGROUND_SUPPORTED + /* NOTE: this assumes the caller provided the correct background gamma! + */ + PNG_CONST double bg = dp->background_gamma; +# ifndef PNG_FLOATING_POINT_SUPPORTED + PNG_CONST png_fixed_point g = fix(bg); +# endif + +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_background(pp, &dp->background_color, dp->do_background, + 0/*need_expand*/, bg); +# else + png_set_background_fixed(pp, &dp->background_color, + dp->do_background, 0/*need_expand*/, g); +# endif +# else + png_error(pp, "png_set_background not supported"); +# endif + } + } + + { + int i = dp->this.use_update_info; + /* Always do one call, even if use_update_info is 0. */ + do + png_read_update_info(pp, pi); + while (--i > 0); + } + + /* Now we may get a different cbRow: */ + standard_info_part2(&dp->this, pp, pi, 1 /*images*/); +} + +static void +gamma_info(png_structp pp, png_infop pi) +{ + gamma_info_imp(voidcast(gamma_display*, png_get_progressive_ptr(pp)), pp, + pi); +} + +/* Validate a single component value - the routine gets the input and output + * sample values as unscaled PNG component values along with a cache of all the + * information required to validate the values. + */ +typedef struct validate_info +{ + png_const_structp pp; + gamma_display *dp; + png_byte sbit; + int use_input_precision; + int do_background; + int scale16; + unsigned int sbit_max; + unsigned int isbit_shift; + unsigned int outmax; + + double gamma_correction; /* Overall correction required. */ + double file_inverse; /* Inverse of file gamma. */ + double screen_gamma; + double screen_inverse; /* Inverse of screen gamma. */ + + double background_red; /* Linear background value, red or gray. */ + double background_green; + double background_blue; + + double maxabs; + double maxpc; + double maxcalc; + double maxout; + double maxout_total; /* Total including quantization error */ + double outlog; + int outquant; +} +validate_info; + +static void +init_validate_info(validate_info *vi, gamma_display *dp, png_const_structp pp, + int in_depth, int out_depth) +{ + PNG_CONST unsigned int outmax = (1U<pp = pp; + vi->dp = dp; + + if (dp->sbit > 0 && dp->sbit < in_depth) + { + vi->sbit = dp->sbit; + vi->isbit_shift = in_depth - dp->sbit; + } + + else + { + vi->sbit = (png_byte)in_depth; + vi->isbit_shift = 0; + } + + vi->sbit_max = (1U << vi->sbit)-1; + + /* This mimics the libpng threshold test, '0' is used to prevent gamma + * correction in the validation test. + */ + vi->screen_gamma = dp->screen_gamma; + if (fabs(vi->screen_gamma-1) < PNG_GAMMA_THRESHOLD) + vi->screen_gamma = vi->screen_inverse = 0; + else + vi->screen_inverse = 1/vi->screen_gamma; + + vi->use_input_precision = dp->use_input_precision; + vi->outmax = outmax; + vi->maxabs = abserr(dp->pm, in_depth, out_depth); + vi->maxpc = pcerr(dp->pm, in_depth, out_depth); + vi->maxcalc = calcerr(dp->pm, in_depth, out_depth); + vi->maxout = outerr(dp->pm, in_depth, out_depth); + vi->outquant = output_quantization_factor(dp->pm, in_depth, out_depth); + vi->maxout_total = vi->maxout + vi->outquant * .5; + vi->outlog = outlog(dp->pm, in_depth, out_depth); + + if ((dp->this.colour_type & PNG_COLOR_MASK_ALPHA) != 0 || + (dp->this.colour_type == 3 && dp->this.is_transparent)) + { + vi->do_background = dp->do_background; + + if (vi->do_background != 0) + { + PNG_CONST double bg_inverse = 1/dp->background_gamma; + double r, g, b; + + /* Caller must at least put the gray value into the red channel */ + r = dp->background_color.red; r /= outmax; + g = dp->background_color.green; g /= outmax; + b = dp->background_color.blue; b /= outmax; + +# if 0 + /* libpng doesn't do this optimization, if we do pngvalid will fail. + */ + if (fabs(bg_inverse-1) >= PNG_GAMMA_THRESHOLD) +# endif + { + r = pow(r, bg_inverse); + g = pow(g, bg_inverse); + b = pow(b, bg_inverse); + } + + vi->background_red = r; + vi->background_green = g; + vi->background_blue = b; + } + } + else + vi->do_background = 0; + + if (vi->do_background == 0) + vi->background_red = vi->background_green = vi->background_blue = 0; + + vi->gamma_correction = 1/(dp->file_gamma*dp->screen_gamma); + if (fabs(vi->gamma_correction-1) < PNG_GAMMA_THRESHOLD) + vi->gamma_correction = 0; + + vi->file_inverse = 1/dp->file_gamma; + if (fabs(vi->file_inverse-1) < PNG_GAMMA_THRESHOLD) + vi->file_inverse = 0; + + vi->scale16 = dp->scale16; +} + +/* This function handles composition of a single non-alpha component. The + * argument is the input sample value, in the range 0..1, and the alpha value. + * The result is the composed, linear, input sample. If alpha is less than zero + * this is the alpha component and the function should not be called! + */ +static double +gamma_component_compose(int do_background, double input_sample, double alpha, + double background, int *compose) +{ + switch (do_background) + { +#ifdef PNG_READ_BACKGROUND_SUPPORTED + case PNG_BACKGROUND_GAMMA_SCREEN: + case PNG_BACKGROUND_GAMMA_FILE: + case PNG_BACKGROUND_GAMMA_UNIQUE: + /* Standard PNG background processing. */ + if (alpha < 1) + { + if (alpha > 0) + { + input_sample = input_sample * alpha + background * (1-alpha); + if (compose != NULL) + *compose = 1; + } + + else + input_sample = background; + } + break; +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: + case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: + /* The components are premultiplied in either case and the output is + * gamma encoded (to get standard Porter-Duff we expect the output + * gamma to be set to 1.0!) + */ + case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: + /* The optimization is that the partial-alpha entries are linear + * while the opaque pixels are gamma encoded, but this only affects the + * output encoding. + */ + if (alpha < 1) + { + if (alpha > 0) + { + input_sample *= alpha; + if (compose != NULL) + *compose = 1; + } + + else + input_sample = 0; + } + break; +#endif + + default: + /* Standard cases where no compositing is done (so the component + * value is already correct.) + */ + UNUSED(alpha) + UNUSED(background) + UNUSED(compose) + break; + } + + return input_sample; +} + +/* This API returns the encoded *input* component, in the range 0..1 */ +static double +gamma_component_validate(PNG_CONST char *name, PNG_CONST validate_info *vi, + PNG_CONST unsigned int id, PNG_CONST unsigned int od, + PNG_CONST double alpha /* <0 for the alpha channel itself */, + PNG_CONST double background /* component background value */) +{ + PNG_CONST unsigned int isbit = id >> vi->isbit_shift; + PNG_CONST unsigned int sbit_max = vi->sbit_max; + PNG_CONST unsigned int outmax = vi->outmax; + PNG_CONST int do_background = vi->do_background; + + double i; + + /* First check on the 'perfect' result obtained from the digitized input + * value, id, and compare this against the actual digitized result, 'od'. + * 'i' is the input result in the range 0..1: + */ + i = isbit; i /= sbit_max; + + /* Check for the fast route: if we don't do any background composition or if + * this is the alpha channel ('alpha' < 0) or if the pixel is opaque then + * just use the gamma_correction field to correct to the final output gamma. + */ + if (alpha == 1 /* opaque pixel component */ || !do_background +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + || do_background == ALPHA_MODE_OFFSET + PNG_ALPHA_PNG +#endif + || (alpha < 0 /* alpha channel */ +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + && do_background != ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN +#endif + )) + { + /* Then get the gamma corrected version of 'i' and compare to 'od', any + * error less than .5 is insignificant - just quantization of the output + * value to the nearest digital value (nevertheless the error is still + * recorded - it's interesting ;-) + */ + double encoded_sample = i; + double encoded_error; + + /* alpha less than 0 indicates the alpha channel, which is always linear + */ + if (alpha >= 0 && vi->gamma_correction > 0) + encoded_sample = pow(encoded_sample, vi->gamma_correction); + encoded_sample *= outmax; + + encoded_error = fabs(od-encoded_sample); + + if (encoded_error > vi->dp->maxerrout) + vi->dp->maxerrout = encoded_error; + + if (encoded_error < vi->maxout_total && encoded_error < vi->outlog) + return i; + } + + /* The slow route - attempt to do linear calculations. */ + /* There may be an error, or background processing is required, so calculate + * the actual sample values - unencoded light intensity values. Note that in + * practice these are not completely unencoded because they include a + * 'viewing correction' to decrease or (normally) increase the perceptual + * contrast of the image. There's nothing we can do about this - we don't + * know what it is - so assume the unencoded value is perceptually linear. + */ + { + double input_sample = i; /* In range 0..1 */ + double output, error, encoded_sample, encoded_error; + double es_lo, es_hi; + int compose = 0; /* Set to one if composition done */ + int output_is_encoded; /* Set if encoded to screen gamma */ + int log_max_error = 1; /* Check maximum error values */ + png_const_charp pass = 0; /* Reason test passes (or 0 for fail) */ + + /* Convert to linear light (with the above caveat.) The alpha channel is + * already linear. + */ + if (alpha >= 0) + { + int tcompose; + + if (vi->file_inverse > 0) + input_sample = pow(input_sample, vi->file_inverse); + + /* Handle the compose processing: */ + tcompose = 0; + input_sample = gamma_component_compose(do_background, input_sample, + alpha, background, &tcompose); + + if (tcompose) + compose = 1; + } + + /* And similarly for the output value, but we need to check the background + * handling to linearize it correctly. + */ + output = od; + output /= outmax; + + output_is_encoded = vi->screen_gamma > 0; + + if (alpha < 0) /* The alpha channel */ + { +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + if (do_background != ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN) +#endif + { + /* In all other cases the output alpha channel is linear already, + * don't log errors here, they are much larger in linear data. + */ + output_is_encoded = 0; + log_max_error = 0; + } + } + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + else /* A component */ + { + if (do_background == ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED && + alpha < 1) /* the optimized case - linear output */ + { + if (alpha > 0) log_max_error = 0; + output_is_encoded = 0; + } + } +#endif + + if (output_is_encoded) + output = pow(output, vi->screen_gamma); + + /* Calculate (or recalculate) the encoded_sample value and repeat the + * check above (unnecessary if we took the fast route, but harmless.) + */ + encoded_sample = input_sample; + if (output_is_encoded) + encoded_sample = pow(encoded_sample, vi->screen_inverse); + encoded_sample *= outmax; + + encoded_error = fabs(od-encoded_sample); + + /* Don't log errors in the alpha channel, or the 'optimized' case, + * neither are significant to the overall perception. + */ + if (log_max_error && encoded_error > vi->dp->maxerrout) + vi->dp->maxerrout = encoded_error; + + if (encoded_error < vi->maxout_total) + { + if (encoded_error < vi->outlog) + return i; + + /* Test passed but error is bigger than the log limit, record why the + * test passed: + */ + pass = "less than maxout:\n"; + } + + /* i: the original input value in the range 0..1 + * + * pngvalid calculations: + * input_sample: linear result; i linearized and composed, range 0..1 + * encoded_sample: encoded result; input_sample scaled to ouput bit depth + * + * libpng calculations: + * output: linear result; od scaled to 0..1 and linearized + * od: encoded result from libpng + */ + + /* Now we have the numbers for real errors, both absolute values as as a + * percentage of the correct value (output): + */ + error = fabs(input_sample-output); + + if (log_max_error && error > vi->dp->maxerrabs) + vi->dp->maxerrabs = error; + + /* The following is an attempt to ignore the tendency of quantization to + * dominate the percentage errors for lower result values: + */ + if (log_max_error && input_sample > .5) + { + double percentage_error = error/input_sample; + if (percentage_error > vi->dp->maxerrpc) + vi->dp->maxerrpc = percentage_error; + } + + /* Now calculate the digitization limits for 'encoded_sample' using the + * 'max' values. Note that maxout is in the encoded space but maxpc and + * maxabs are in linear light space. + * + * First find the maximum error in linear light space, range 0..1: + */ + { + double tmp = input_sample * vi->maxpc; + if (tmp < vi->maxabs) tmp = vi->maxabs; + /* If 'compose' is true the composition was done in linear space using + * integer arithmetic. This introduces an extra error of +/- 0.5 (at + * least) in the integer space used. 'maxcalc' records this, taking + * into account the possibility that even for 16 bit output 8 bit space + * may have been used. + */ + if (compose && tmp < vi->maxcalc) tmp = vi->maxcalc; + + /* The 'maxout' value refers to the encoded result, to compare with + * this encode input_sample adjusted by the maximum error (tmp) above. + */ + es_lo = encoded_sample - vi->maxout; + + if (es_lo > 0 && input_sample-tmp > 0) + { + double low_value = input_sample-tmp; + if (output_is_encoded) + low_value = pow(low_value, vi->screen_inverse); + low_value *= outmax; + if (low_value < es_lo) es_lo = low_value; + + /* Quantize this appropriately: */ + es_lo = ceil(es_lo / vi->outquant - .5) * vi->outquant; + } + + else + es_lo = 0; + + es_hi = encoded_sample + vi->maxout; + + if (es_hi < outmax && input_sample+tmp < 1) + { + double high_value = input_sample+tmp; + if (output_is_encoded) + high_value = pow(high_value, vi->screen_inverse); + high_value *= outmax; + if (high_value > es_hi) es_hi = high_value; + + es_hi = floor(es_hi / vi->outquant + .5) * vi->outquant; + } + + else + es_hi = outmax; + } + + /* The primary test is that the final encoded value returned by the + * library should be between the two limits (inclusive) that were + * calculated above. + */ + if (od >= es_lo && od <= es_hi) + { + /* The value passes, but we may need to log the information anyway. */ + if (encoded_error < vi->outlog) + return i; + + if (pass == 0) + pass = "within digitization limits:\n"; + } + + { + /* There has been an error in processing, or we need to log this + * value. + */ + double is_lo, is_hi; + + /* pass is set at this point if either of the tests above would have + * passed. Don't do these additional tests here - just log the + * original [es_lo..es_hi] values. + */ + if (pass == 0 && vi->use_input_precision) + { + /* Ok, something is wrong - this actually happens in current libpng + * 16-to-8 processing. Assume that the input value (id, adjusted + * for sbit) can be anywhere between value-.5 and value+.5 - quite a + * large range if sbit is low. + */ + double tmp = (isbit - .5)/sbit_max; + + if (tmp <= 0) + tmp = 0; + + else if (alpha >= 0 && vi->file_inverse > 0 && tmp < 1) + tmp = pow(tmp, vi->file_inverse); + + tmp = gamma_component_compose(do_background, tmp, alpha, background, + NULL); + + if (output_is_encoded && tmp > 0 && tmp < 1) + tmp = pow(tmp, vi->screen_inverse); + + is_lo = ceil(outmax * tmp - vi->maxout_total); + + if (is_lo < 0) + is_lo = 0; + + tmp = (isbit + .5)/sbit_max; + + if (tmp <= 0) + tmp = 0; + + else if (alpha >= 0 && vi->file_inverse > 0 && tmp < 1) + tmp = pow(tmp, vi->file_inverse); + + tmp = gamma_component_compose(do_background, tmp, alpha, background, + NULL); + + if (output_is_encoded && tmp > 0 && tmp < 1) + tmp = pow(tmp, vi->screen_inverse); + + is_hi = floor(outmax * tmp + vi->maxout_total); + + if (is_hi > outmax) + is_hi = outmax; + + if (!(od < is_lo || od > is_hi)) + { + if (encoded_error < vi->outlog) + return i; + + pass = "within input precision limits:\n"; + } + + /* One last chance. If this is an alpha channel and the 16to8 + * option has been used and 'inaccurate' scaling is used then the + * bit reduction is obtained by simply using the top 8 bits of the + * value. + * + * This is only done for older libpng versions when the 'inaccurate' + * (chop) method of scaling was used. + */ +# ifndef PNG_READ_16_TO_8_ACCURATE_SCALE_SUPPORTED +# if PNG_LIBPNG_VER < 10504 + /* This may be required for other components in the future, + * but at present the presence of gamma correction effectively + * prevents the errors in the component scaling (I don't quite + * understand why, but since it's better this way I care not + * to ask, JB 20110419.) + */ + if (pass == 0 && alpha < 0 && vi->scale16 && vi->sbit > 8 && + vi->sbit + vi->isbit_shift == 16) + { + tmp = ((id >> 8) - .5)/255; + + if (tmp > 0) + { + is_lo = ceil(outmax * tmp - vi->maxout_total); + if (is_lo < 0) is_lo = 0; + } + + else + is_lo = 0; + + tmp = ((id >> 8) + .5)/255; + + if (tmp < 1) + { + is_hi = floor(outmax * tmp + vi->maxout_total); + if (is_hi > outmax) is_hi = outmax; + } + + else + is_hi = outmax; + + if (!(od < is_lo || od > is_hi)) + { + if (encoded_error < vi->outlog) + return i; + + pass = "within 8 bit limits:\n"; + } + } +# endif +# endif + } + else /* !use_input_precision */ + is_lo = es_lo, is_hi = es_hi; + + /* Attempt to output a meaningful error/warning message: the message + * output depends on the background/composite operation being performed + * because this changes what parameters were actually used above. + */ + { + size_t pos = 0; + /* Need either 1/255 or 1/65535 precision here; 3 or 6 decimal + * places. Just use outmax to work out which. + */ + int precision = (outmax >= 1000 ? 6 : 3); + int use_input=1, use_background=0, do_compose=0; + char msg[256]; + + if (pass != 0) + pos = safecat(msg, sizeof msg, pos, "\n\t"); + + /* Set up the various flags, the output_is_encoded flag above + * is also used below. do_compose is just a double check. + */ + switch (do_background) + { +# ifdef PNG_READ_BACKGROUND_SUPPORTED + case PNG_BACKGROUND_GAMMA_SCREEN: + case PNG_BACKGROUND_GAMMA_FILE: + case PNG_BACKGROUND_GAMMA_UNIQUE: + use_background = (alpha >= 0 && alpha < 1); + /*FALL THROUGH*/ +# endif +# ifdef PNG_READ_ALPHA_MODE_SUPPORTED + case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: + case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: + case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: +# endif /* ALPHA_MODE_SUPPORTED */ + do_compose = (alpha > 0 && alpha < 1); + use_input = (alpha != 0); + break; + + default: + break; + } + + /* Check the 'compose' flag */ + if (compose != do_compose) + png_error(vi->pp, "internal error (compose)"); + + /* 'name' is the component name */ + pos = safecat(msg, sizeof msg, pos, name); + pos = safecat(msg, sizeof msg, pos, "("); + pos = safecatn(msg, sizeof msg, pos, id); + if (use_input || pass != 0/*logging*/) + { + if (isbit != id) + { + /* sBIT has reduced the precision of the input: */ + pos = safecat(msg, sizeof msg, pos, ", sbit("); + pos = safecatn(msg, sizeof msg, pos, vi->sbit); + pos = safecat(msg, sizeof msg, pos, "): "); + pos = safecatn(msg, sizeof msg, pos, isbit); + } + pos = safecat(msg, sizeof msg, pos, "/"); + /* The output is either "id/max" or "id sbit(sbit): isbit/max" */ + pos = safecatn(msg, sizeof msg, pos, vi->sbit_max); + } + pos = safecat(msg, sizeof msg, pos, ")"); + + /* A component may have been multiplied (in linear space) by the + * alpha value, 'compose' says whether this is relevant. + */ + if (compose || pass != 0) + { + /* If any form of composition is being done report our + * calculated linear value here (the code above doesn't record + * the input value before composition is performed, so what + * gets reported is the value after composition.) + */ + if (use_input || pass != 0) + { + if (vi->file_inverse > 0) + { + pos = safecat(msg, sizeof msg, pos, "^"); + pos = safecatd(msg, sizeof msg, pos, vi->file_inverse, 2); + } + + else + pos = safecat(msg, sizeof msg, pos, "[linear]"); + + pos = safecat(msg, sizeof msg, pos, "*(alpha)"); + pos = safecatd(msg, sizeof msg, pos, alpha, precision); + } + + /* Now record the *linear* background value if it was used + * (this function is not passed the original, non-linear, + * value but it is contained in the test name.) + */ + if (use_background) + { + pos = safecat(msg, sizeof msg, pos, use_input ? "+" : " "); + pos = safecat(msg, sizeof msg, pos, "(background)"); + pos = safecatd(msg, sizeof msg, pos, background, precision); + pos = safecat(msg, sizeof msg, pos, "*"); + pos = safecatd(msg, sizeof msg, pos, 1-alpha, precision); + } + } + + /* Report the calculated value (input_sample) and the linearized + * libpng value (output) unless this is just a component gamma + * correction. + */ + if (compose || alpha < 0 || pass != 0) + { + pos = safecat(msg, sizeof msg, pos, + pass != 0 ? " =\n\t" : " = "); + pos = safecatd(msg, sizeof msg, pos, input_sample, precision); + pos = safecat(msg, sizeof msg, pos, " (libpng: "); + pos = safecatd(msg, sizeof msg, pos, output, precision); + pos = safecat(msg, sizeof msg, pos, ")"); + + /* Finally report the output gamma encoding, if any. */ + if (output_is_encoded) + { + pos = safecat(msg, sizeof msg, pos, " ^"); + pos = safecatd(msg, sizeof msg, pos, vi->screen_inverse, 2); + pos = safecat(msg, sizeof msg, pos, "(to screen) ="); + } + + else + pos = safecat(msg, sizeof msg, pos, " [screen is linear] ="); + } + + if ((!compose && alpha >= 0) || pass != 0) + { + if (pass != 0) /* logging */ + pos = safecat(msg, sizeof msg, pos, "\n\t[overall:"); + + /* This is the non-composition case, the internal linear + * values are irrelevant (though the log below will reveal + * them.) Output a much shorter warning/error message and report + * the overall gamma correction. + */ + if (vi->gamma_correction > 0) + { + pos = safecat(msg, sizeof msg, pos, " ^"); + pos = safecatd(msg, sizeof msg, pos, vi->gamma_correction, 2); + pos = safecat(msg, sizeof msg, pos, "(gamma correction) ="); + } + + else + pos = safecat(msg, sizeof msg, pos, + " [no gamma correction] ="); + + if (pass != 0) + pos = safecat(msg, sizeof msg, pos, "]"); + } + + /* This is our calculated encoded_sample which should (but does + * not) match od: + */ + pos = safecat(msg, sizeof msg, pos, pass != 0 ? "\n\t" : " "); + pos = safecatd(msg, sizeof msg, pos, is_lo, 1); + pos = safecat(msg, sizeof msg, pos, " < "); + pos = safecatd(msg, sizeof msg, pos, encoded_sample, 1); + pos = safecat(msg, sizeof msg, pos, " (libpng: "); + pos = safecatn(msg, sizeof msg, pos, od); + pos = safecat(msg, sizeof msg, pos, ")"); + pos = safecat(msg, sizeof msg, pos, "/"); + pos = safecatn(msg, sizeof msg, pos, outmax); + pos = safecat(msg, sizeof msg, pos, " < "); + pos = safecatd(msg, sizeof msg, pos, is_hi, 1); + + if (pass == 0) /* The error condition */ + { +# ifdef PNG_WARNINGS_SUPPORTED + png_warning(vi->pp, msg); +# else + store_warning(vi->pp, msg); +# endif + } + + else /* logging this value */ + store_verbose(&vi->dp->pm->this, vi->pp, pass, msg); + } + } + } + + return i; +} + +static void +gamma_image_validate(gamma_display *dp, png_const_structp pp, + png_infop pi) +{ + /* Get some constants derived from the input and output file formats: */ + PNG_CONST png_store* PNG_CONST ps = dp->this.ps; + PNG_CONST png_byte in_ct = dp->this.colour_type; + PNG_CONST png_byte in_bd = dp->this.bit_depth; + PNG_CONST png_uint_32 w = dp->this.w; + PNG_CONST png_uint_32 h = dp->this.h; + PNG_CONST size_t cbRow = dp->this.cbRow; + PNG_CONST png_byte out_ct = png_get_color_type(pp, pi); + PNG_CONST png_byte out_bd = png_get_bit_depth(pp, pi); + + /* There are three sources of error, firstly the quantization in the + * file encoding, determined by sbit and/or the file depth, secondly + * the output (screen) gamma and thirdly the output file encoding. + * + * Since this API receives the screen and file gamma in double + * precision it is possible to calculate an exact answer given an input + * pixel value. Therefore we assume that the *input* value is exact - + * sample/maxsample - calculate the corresponding gamma corrected + * output to the limits of double precision arithmetic and compare with + * what libpng returns. + * + * Since the library must quantize the output to 8 or 16 bits there is + * a fundamental limit on the accuracy of the output of +/-.5 - this + * quantization limit is included in addition to the other limits + * specified by the paramaters to the API. (Effectively, add .5 + * everywhere.) + * + * The behavior of the 'sbit' paramter is defined by section 12.5 + * (sample depth scaling) of the PNG spec. That section forces the + * decoder to assume that the PNG values have been scaled if sBIT is + * present: + * + * png-sample = floor( input-sample * (max-out/max-in) + .5); + * + * This means that only a subset of the possible PNG values should + * appear in the input. However, the spec allows the encoder to use a + * variety of approximations to the above and doesn't require any + * restriction of the values produced. + * + * Nevertheless the spec requires that the upper 'sBIT' bits of the + * value stored in a PNG file be the original sample bits. + * Consequently the code below simply scales the top sbit bits by + * (1<this.palette; + PNG_CONST int in_is_transparent = dp->this.is_transparent; + int out_npalette = -1; + int out_is_transparent = 0; /* Just refers to the palette case */ + store_palette out_palette; + validate_info vi; + + /* Check for row overwrite errors */ + store_image_check(dp->this.ps, pp, 0); + + /* Supply the input and output sample depths here - 8 for an indexed image, + * otherwise the bit depth. + */ + init_validate_info(&vi, dp, pp, in_ct==3?8:in_bd, out_ct==3?8:out_bd); + + processing = (vi.gamma_correction > 0 && !dp->threshold_test) + || in_bd != out_bd || in_ct != out_ct || vi.do_background; + + /* TODO: FIX THIS: MAJOR BUG! If the transformations all happen inside + * the palette there is no way of finding out, because libpng fails to + * update the palette on png_read_update_info. Indeed, libpng doesn't + * even do the required work until much later, when it doesn't have any + * info pointer. Oops. For the moment 'processing' is turned off if + * out_ct is palette. + */ + if (in_ct == 3 && out_ct == 3) + processing = 0; + + if (processing && out_ct == 3) + out_is_transparent = read_palette(out_palette, &out_npalette, pp, pi); + + for (y=0; ythis.palette[in_index].alpha : + sample(std, in_ct, in_bd, x, samples_per_pixel); + + unsigned int output_alpha = 65536 /* as a flag value */; + + if (out_ct == 3) + { + if (out_is_transparent) + output_alpha = out_palette[out_index].alpha; + } + + else if ((out_ct & PNG_COLOR_MASK_ALPHA) != 0) + output_alpha = sample(pRow, out_ct, out_bd, x, + samples_per_pixel); + + if (output_alpha != 65536) + alpha = gamma_component_validate("alpha", &vi, input_alpha, + output_alpha, -1/*alpha*/, 0/*background*/); + + else /* no alpha in output */ + { + /* This is a copy of the calculation of 'i' above in order to + * have the alpha value to use in the background calculation. + */ + alpha = input_alpha >> vi.isbit_shift; + alpha /= vi.sbit_max; + } + } + + /* Handle grayscale or RGB components. */ + if ((in_ct & PNG_COLOR_MASK_COLOR) == 0) /* grayscale */ + (void)gamma_component_validate("gray", &vi, + sample(std, in_ct, in_bd, x, 0), + sample(pRow, out_ct, out_bd, x, 0), alpha/*component*/, + vi.background_red); + else /* RGB or palette */ + { + (void)gamma_component_validate("red", &vi, + in_ct == 3 ? in_palette[in_index].red : + sample(std, in_ct, in_bd, x, 0), + out_ct == 3 ? out_palette[out_index].red : + sample(pRow, out_ct, out_bd, x, 0), + alpha/*component*/, vi.background_red); + + (void)gamma_component_validate("green", &vi, + in_ct == 3 ? in_palette[in_index].green : + sample(std, in_ct, in_bd, x, 1), + out_ct == 3 ? out_palette[out_index].green : + sample(pRow, out_ct, out_bd, x, 1), + alpha/*component*/, vi.background_green); + + (void)gamma_component_validate("blue", &vi, + in_ct == 3 ? in_palette[in_index].blue : + sample(std, in_ct, in_bd, x, 2), + out_ct == 3 ? out_palette[out_index].blue : + sample(pRow, out_ct, out_bd, x, 2), + alpha/*component*/, vi.background_blue); + } + } + } + + else if (memcmp(std, pRow, cbRow) != 0) + { + char msg[64]; + + /* No transform is expected on the threshold tests. */ + sprintf(msg, "gamma: below threshold row %lu changed", + (unsigned long)y); + + png_error(pp, msg); + } + } /* row (y) loop */ + + dp->this.ps->validated = 1; +} + +static void +gamma_end(png_structp ppIn, png_infop pi) +{ + png_const_structp pp = ppIn; + gamma_display *dp = voidcast(gamma_display*, png_get_progressive_ptr(pp)); + + if (!dp->this.speed) + gamma_image_validate(dp, pp, pi); + else + dp->this.ps->validated = 1; +} + +/* A single test run checking a gamma transformation. + * + * maxabs: maximum absolute error as a fraction + * maxout: maximum output error in the output units + * maxpc: maximum percentage error (as a percentage) + */ +static void +gamma_test(png_modifier *pmIn, PNG_CONST png_byte colour_typeIn, + PNG_CONST png_byte bit_depthIn, PNG_CONST int palette_numberIn, + PNG_CONST int interlace_typeIn, + PNG_CONST double file_gammaIn, PNG_CONST double screen_gammaIn, + PNG_CONST png_byte sbitIn, PNG_CONST int threshold_testIn, + PNG_CONST char *name, + PNG_CONST int use_input_precisionIn, PNG_CONST int scale16In, + PNG_CONST int expand16In, PNG_CONST int do_backgroundIn, + PNG_CONST png_color_16 *bkgd_colorIn, double bkgd_gammaIn) +{ + gamma_display d; + context(&pmIn->this, fault); + + gamma_display_init(&d, pmIn, FILEID(colour_typeIn, bit_depthIn, + palette_numberIn, interlace_typeIn, 0, 0, 0), + file_gammaIn, screen_gammaIn, sbitIn, + threshold_testIn, use_input_precisionIn, scale16In, + expand16In, do_backgroundIn, bkgd_colorIn, bkgd_gammaIn); + + Try + { + png_structp pp; + png_infop pi; + gama_modification gama_mod; + srgb_modification srgb_mod; + sbit_modification sbit_mod; + + /* For the moment don't use the png_modifier support here. */ + d.pm->encoding_counter = 0; + modifier_set_encoding(d.pm); /* Just resets everything */ + d.pm->current_gamma = d.file_gamma; + + /* Make an appropriate modifier to set the PNG file gamma to the + * given gamma value and the sBIT chunk to the given precision. + */ + d.pm->modifications = NULL; + gama_modification_init(&gama_mod, d.pm, d.file_gamma); + srgb_modification_init(&srgb_mod, d.pm, 127 /*delete*/); + if (d.sbit > 0) + sbit_modification_init(&sbit_mod, d.pm, d.sbit); + + modification_reset(d.pm->modifications); + + /* Get a png_struct for writing the image. */ + pp = set_modifier_for_read(d.pm, &pi, d.this.id, name); + standard_palette_init(&d.this); + + /* Introduce the correct read function. */ + if (d.pm->this.progressive) + { + /* Share the row function with the standard implementation. */ + png_set_progressive_read_fn(pp, &d, gamma_info, progressive_row, + gamma_end); + + /* Now feed data into the reader until we reach the end: */ + modifier_progressive_read(d.pm, pp, pi); + } + else + { + /* modifier_read expects a png_modifier* */ + png_set_read_fn(pp, d.pm, modifier_read); + + /* Check the header values: */ + png_read_info(pp, pi); + + /* Process the 'info' requirements. Only one image is generated */ + gamma_info_imp(&d, pp, pi); + + sequential_row(&d.this, pp, pi, -1, 0); + + if (!d.this.speed) + gamma_image_validate(&d, pp, pi); + else + d.this.ps->validated = 1; + } + + modifier_reset(d.pm); + + if (d.pm->log && !d.threshold_test && !d.this.speed) + fprintf(stderr, "%d bit %s %s: max error %f (%.2g, %2g%%)\n", + d.this.bit_depth, colour_types[d.this.colour_type], name, + d.maxerrout, d.maxerrabs, 100*d.maxerrpc); + + /* Log the summary values too. */ + if (d.this.colour_type == 0 || d.this.colour_type == 4) + { + switch (d.this.bit_depth) + { + case 1: + break; + + case 2: + if (d.maxerrout > d.pm->error_gray_2) + d.pm->error_gray_2 = d.maxerrout; + + break; + + case 4: + if (d.maxerrout > d.pm->error_gray_4) + d.pm->error_gray_4 = d.maxerrout; + + break; + + case 8: + if (d.maxerrout > d.pm->error_gray_8) + d.pm->error_gray_8 = d.maxerrout; + + break; + + case 16: + if (d.maxerrout > d.pm->error_gray_16) + d.pm->error_gray_16 = d.maxerrout; + + break; + + default: + png_error(pp, "bad bit depth (internal: 1)"); + } + } + + else if (d.this.colour_type == 2 || d.this.colour_type == 6) + { + switch (d.this.bit_depth) + { + case 8: + + if (d.maxerrout > d.pm->error_color_8) + d.pm->error_color_8 = d.maxerrout; + + break; + + case 16: + + if (d.maxerrout > d.pm->error_color_16) + d.pm->error_color_16 = d.maxerrout; + + break; + + default: + png_error(pp, "bad bit depth (internal: 2)"); + } + } + + else if (d.this.colour_type == 3) + { + if (d.maxerrout > d.pm->error_indexed) + d.pm->error_indexed = d.maxerrout; + } + } + + Catch(fault) + modifier_reset((png_modifier*)fault); +} + +static void gamma_threshold_test(png_modifier *pm, png_byte colour_type, + png_byte bit_depth, int interlace_type, double file_gamma, + double screen_gamma) +{ + size_t pos = 0; + char name[64]; + pos = safecat(name, sizeof name, pos, "threshold "); + pos = safecatd(name, sizeof name, pos, file_gamma, 3); + pos = safecat(name, sizeof name, pos, "/"); + pos = safecatd(name, sizeof name, pos, screen_gamma, 3); + + (void)gamma_test(pm, colour_type, bit_depth, 0/*palette*/, interlace_type, + file_gamma, screen_gamma, 0/*sBIT*/, 1/*threshold test*/, name, + 0 /*no input precision*/, + 0 /*no scale16*/, 0 /*no expand16*/, 0 /*no background*/, 0 /*hence*/, + 0 /*no background gamma*/); +} + +static void +perform_gamma_threshold_tests(png_modifier *pm) +{ + png_byte colour_type = 0; + png_byte bit_depth = 0; + unsigned int palette_number = 0; + + /* Don't test more than one instance of each palette - it's pointless, in + * fact this test is somewhat excessive since libpng doesn't make this + * decision based on colour type or bit depth! + */ + while (next_format(&colour_type, &bit_depth, &palette_number)) + if (palette_number == 0) + { + double test_gamma = 1.0; + while (test_gamma >= .4) + { + /* There's little point testing the interlacing vs non-interlacing, + * but this can be set from the command line. + */ + gamma_threshold_test(pm, colour_type, bit_depth, pm->interlace_type, + test_gamma, 1/test_gamma); + test_gamma *= .95; + } + + /* And a special test for sRGB */ + gamma_threshold_test(pm, colour_type, bit_depth, pm->interlace_type, + .45455, 2.2); + + if (fail(pm)) + return; + } +} + +static void gamma_transform_test(png_modifier *pm, + PNG_CONST png_byte colour_type, PNG_CONST png_byte bit_depth, + PNG_CONST int palette_number, + PNG_CONST int interlace_type, PNG_CONST double file_gamma, + PNG_CONST double screen_gamma, PNG_CONST png_byte sbit, + PNG_CONST int use_input_precision, PNG_CONST int scale16) +{ + size_t pos = 0; + char name[64]; + + if (sbit != bit_depth && sbit != 0) + { + pos = safecat(name, sizeof name, pos, "sbit("); + pos = safecatn(name, sizeof name, pos, sbit); + pos = safecat(name, sizeof name, pos, ") "); + } + + else + pos = safecat(name, sizeof name, pos, "gamma "); + + if (scale16) + pos = safecat(name, sizeof name, pos, "16to8 "); + + pos = safecatd(name, sizeof name, pos, file_gamma, 3); + pos = safecat(name, sizeof name, pos, "->"); + pos = safecatd(name, sizeof name, pos, screen_gamma, 3); + + gamma_test(pm, colour_type, bit_depth, palette_number, interlace_type, + file_gamma, screen_gamma, sbit, 0, name, use_input_precision, + scale16, pm->test_gamma_expand16, 0 , 0, 0); +} + +static void perform_gamma_transform_tests(png_modifier *pm) +{ + png_byte colour_type = 0; + png_byte bit_depth = 0; + unsigned int palette_number = 0; + + while (next_format(&colour_type, &bit_depth, &palette_number)) + { + unsigned int i, j; + + for (i=0; ingamma_tests; ++i) for (j=0; jngamma_tests; ++j) + if (i != j) + { + gamma_transform_test(pm, colour_type, bit_depth, palette_number, + pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], 0/*sBIT*/, + pm->use_input_precision, 0 /*do not scale16*/); + + if (fail(pm)) + return; + } + } +} + +static void perform_gamma_sbit_tests(png_modifier *pm) +{ + png_byte sbit; + + /* The only interesting cases are colour and grayscale, alpha is ignored here + * for overall speed. Only bit depths where sbit is less than the bit depth + * are tested. + */ + for (sbit=pm->sbitlow; sbit<(1<ngamma_tests; ++i) + { + unsigned int j; + + for (j=0; jngamma_tests; ++j) if (i != j) + { + gamma_transform_test(pm, colour_type, bit_depth, npalette, + pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], + sbit, pm->use_input_precision_sbit, 0 /*scale16*/); + + if (fail(pm)) + return; + } + } + } + } +} + +/* Note that this requires a 16 bit source image but produces 8 bit output, so + * we only need the 16bit write support, but the 16 bit images are only + * generated if DO_16BIT is defined. + */ +#ifdef DO_16BIT +static void perform_gamma_scale16_tests(png_modifier *pm) +{ +# ifndef PNG_MAX_GAMMA_8 +# define PNG_MAX_GAMMA_8 11 +# endif + /* Include the alpha cases here. Note that sbit matches the internal value + * used by the library - otherwise we will get spurious errors from the + * internal sbit style approximation. + * + * The threshold test is here because otherwise the 16 to 8 conversion will + * proceed *without* gamma correction, and the tests above will fail (but not + * by much) - this could be fixed, it only appears with the -g option. + */ + unsigned int i, j; + for (i=0; ingamma_tests; ++i) + { + for (j=0; jngamma_tests; ++j) + { + if (i != j && + fabs(pm->gammas[j]/pm->gammas[i]-1) >= PNG_GAMMA_THRESHOLD) + { + gamma_transform_test(pm, 0, 16, 0, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], PNG_MAX_GAMMA_8, + pm->use_input_precision_16to8, 1 /*scale16*/); + + if (fail(pm)) + return; + + gamma_transform_test(pm, 2, 16, 0, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], PNG_MAX_GAMMA_8, + pm->use_input_precision_16to8, 1 /*scale16*/); + + if (fail(pm)) + return; + + gamma_transform_test(pm, 4, 16, 0, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], PNG_MAX_GAMMA_8, + pm->use_input_precision_16to8, 1 /*scale16*/); + + if (fail(pm)) + return; + + gamma_transform_test(pm, 6, 16, 0, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], PNG_MAX_GAMMA_8, + pm->use_input_precision_16to8, 1 /*scale16*/); + + if (fail(pm)) + return; + } + } + } +} +#endif /* 16 to 8 bit conversion */ + +#if defined(PNG_READ_BACKGROUND_SUPPORTED) ||\ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) +static void gamma_composition_test(png_modifier *pm, + PNG_CONST png_byte colour_type, PNG_CONST png_byte bit_depth, + PNG_CONST int palette_number, + PNG_CONST int interlace_type, PNG_CONST double file_gamma, + PNG_CONST double screen_gamma, + PNG_CONST int use_input_precision, PNG_CONST int do_background, + PNG_CONST int expand_16) +{ + size_t pos = 0; + png_const_charp base; + double bg; + char name[128]; + png_color_16 background; + + /* Make up a name and get an appropriate background gamma value. */ + switch (do_background) + { + default: + base = ""; + bg = 4; /* should not be used */ + break; + case PNG_BACKGROUND_GAMMA_SCREEN: + base = " bckg(Screen):"; + bg = 1/screen_gamma; + break; + case PNG_BACKGROUND_GAMMA_FILE: + base = " bckg(File):"; + bg = file_gamma; + break; + case PNG_BACKGROUND_GAMMA_UNIQUE: + base = " bckg(Unique):"; + /* This tests the handling of a unique value, the math is such that the + * value tends to be <1, but is neither screen nor file (even if they + * match!) + */ + bg = (file_gamma + screen_gamma) / 3; + break; +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + case ALPHA_MODE_OFFSET + PNG_ALPHA_PNG: + base = " alpha(PNG)"; + bg = 4; /* should not be used */ + break; + case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: + base = " alpha(Porter-Duff)"; + bg = 4; /* should not be used */ + break; + case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: + base = " alpha(Optimized)"; + bg = 4; /* should not be used */ + break; + case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: + base = " alpha(Broken)"; + bg = 4; /* should not be used */ + break; +#endif + } + + /* Use random background values - the background is always presented in the + * output space (8 or 16 bit components). + */ + if (expand_16 || bit_depth == 16) + { + png_uint_32 r = random_32(); + + background.red = (png_uint_16)r; + background.green = (png_uint_16)(r >> 16); + r = random_32(); + background.blue = (png_uint_16)r; + background.gray = (png_uint_16)(r >> 16); + } + + else /* 8 bit colors */ + { + png_uint_32 r = random_32(); + + background.red = (png_byte)r; + background.green = (png_byte)(r >> 8); + background.blue = (png_byte)(r >> 16); + background.gray = (png_byte)(r >> 24); + } + + background.index = 193; /* rgb(193,193,193) to detect errors */ + if (!(colour_type & PNG_COLOR_MASK_COLOR)) + { + /* Grayscale input, we do not convert to RGB (TBD), so we must set the + * background to gray - else libpng seems to fail. + */ + background.red = background.green = background.blue = background.gray; + } + + pos = safecat(name, sizeof name, pos, "gamma "); + pos = safecatd(name, sizeof name, pos, file_gamma, 3); + pos = safecat(name, sizeof name, pos, "->"); + pos = safecatd(name, sizeof name, pos, screen_gamma, 3); + + pos = safecat(name, sizeof name, pos, base); + if (do_background < ALPHA_MODE_OFFSET) + { + /* Include the background color and gamma in the name: */ + pos = safecat(name, sizeof name, pos, "("); + /* This assumes no expand gray->rgb - the current code won't handle that! + */ + if (colour_type & PNG_COLOR_MASK_COLOR) + { + pos = safecatn(name, sizeof name, pos, background.red); + pos = safecat(name, sizeof name, pos, ","); + pos = safecatn(name, sizeof name, pos, background.green); + pos = safecat(name, sizeof name, pos, ","); + pos = safecatn(name, sizeof name, pos, background.blue); + } + else + pos = safecatn(name, sizeof name, pos, background.gray); + pos = safecat(name, sizeof name, pos, ")^"); + pos = safecatd(name, sizeof name, pos, bg, 3); + } + + gamma_test(pm, colour_type, bit_depth, palette_number, interlace_type, + file_gamma, screen_gamma, 0/*sBIT*/, 0, name, use_input_precision, + 0/*strip 16*/, expand_16, do_background, &background, bg); +} + + +static void +perform_gamma_composition_tests(png_modifier *pm, int do_background, + int expand_16) +{ + png_byte colour_type = 0; + png_byte bit_depth = 0; + unsigned int palette_number = 0; + + /* Skip the non-alpha cases - there is no setting of a transparency colour at + * present. + */ + while (next_format(&colour_type, &bit_depth, &palette_number)) + if ((colour_type & PNG_COLOR_MASK_ALPHA) != 0) + { + unsigned int i, j; + + /* Don't skip the i==j case here - it's relevant. */ + for (i=0; ingamma_tests; ++i) for (j=0; jngamma_tests; ++j) + { + gamma_composition_test(pm, colour_type, bit_depth, palette_number, + pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], + pm->use_input_precision, do_background, expand_16); + + if (fail(pm)) + return; + } + } +} +#endif /* READ_BACKGROUND || READ_ALPHA_MODE */ + +static void +init_gamma_errors(png_modifier *pm) +{ + pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = 0; + pm->error_color_8 = 0; + pm->error_indexed = 0; + pm->error_gray_16 = pm->error_color_16 = 0; +} + +static void +summarize_gamma_errors(png_modifier *pm, png_const_charp who, int low_bit_depth) +{ + if (who) + printf("Gamma correction with %s:\n", who); + + if (low_bit_depth) + { + printf(" 2 bit gray: %.5f\n", pm->error_gray_2); + printf(" 4 bit gray: %.5f\n", pm->error_gray_4); + printf(" 8 bit gray: %.5f\n", pm->error_gray_8); + printf(" 8 bit color: %.5f\n", pm->error_color_8); + printf(" indexed: %.5f\n", pm->error_indexed); + } + +#ifdef DO_16BIT + printf(" 16 bit gray: %.5f\n", pm->error_gray_16); + printf(" 16 bit color: %.5f\n", pm->error_color_16); +#endif +} + +static void +perform_gamma_test(png_modifier *pm, int summary) +{ + /*TODO: remove this*/ + /* Save certain values for the temporary overrides below. */ + unsigned int calculations_use_input_precision = + pm->calculations_use_input_precision; +# ifdef PNG_READ_BACKGROUND_SUPPORTED + double maxout8 = pm->maxout8; +# endif + + /* First some arbitrary no-transform tests: */ + if (!pm->this.speed && pm->test_gamma_threshold) + { + perform_gamma_threshold_tests(pm); + + if (fail(pm)) + return; + } + + /* Now some real transforms. */ + if (pm->test_gamma_transform) + { + init_gamma_errors(pm); + /*TODO: remove this. Necessary because the current libpng + * implementation works in 8 bits: + */ + if (pm->test_gamma_expand16) + pm->calculations_use_input_precision = 1; + perform_gamma_transform_tests(pm); + if (!calculations_use_input_precision) + pm->calculations_use_input_precision = 0; + + if (summary) + { + printf("Gamma correction error summary\n\n"); + printf("The printed value is the maximum error in the pixel values\n"); + printf("calculated by the libpng gamma correction code. The error\n"); + printf("is calculated as the difference between the output pixel\n"); + printf("value (always an integer) and the ideal value from the\n"); + printf("libpng specification (typically not an integer).\n\n"); + + printf("Expect this value to be less than .5 for 8 bit formats,\n"); + printf("less than 1 for formats with fewer than 8 bits and a small\n"); + printf("number (typically less than 5) for the 16 bit formats.\n"); + printf("For performance reasons the value for 16 bit formats\n"); + printf("increases when the image file includes an sBIT chunk.\n\n"); + + summarize_gamma_errors(pm, 0/*who*/, 1); + } + } + + /* The sbit tests produce much larger errors: */ + if (pm->test_gamma_sbit) + { + init_gamma_errors(pm); + perform_gamma_sbit_tests(pm); + + if (summary) + summarize_gamma_errors(pm, "sBIT", pm->sbitlow < 8U); + } + +#ifdef DO_16BIT /* Should be READ_16BIT_SUPPORTED */ + if (pm->test_gamma_scale16) + { + /* The 16 to 8 bit strip operations: */ + init_gamma_errors(pm); + perform_gamma_scale16_tests(pm); + + if (summary) + { + printf("Gamma correction with 16 to 8 bit reduction:\n"); + printf(" 16 bit gray: %.5f\n", pm->error_gray_16); + printf(" 16 bit color: %.5f\n", pm->error_color_16); + } + } +#endif + +#ifdef PNG_READ_BACKGROUND_SUPPORTED + if (pm->test_gamma_background) + { + init_gamma_errors(pm); + + /*TODO: remove this. Necessary because the current libpng + * implementation works in 8 bits: + */ + if (pm->test_gamma_expand16) + { + pm->calculations_use_input_precision = 1; + pm->maxout8 = .499; /* because the 16 bit background is smashed */ + } + perform_gamma_composition_tests(pm, PNG_BACKGROUND_GAMMA_UNIQUE, + pm->test_gamma_expand16); + if (!calculations_use_input_precision) + pm->calculations_use_input_precision = 0; + pm->maxout8 = maxout8; + + if (summary) + summarize_gamma_errors(pm, "background", 1); + } +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + if (pm->test_gamma_alpha_mode) + { + int do_background; + + init_gamma_errors(pm); + + /*TODO: remove this. Necessary because the current libpng + * implementation works in 8 bits: + */ + if (pm->test_gamma_expand16) + pm->calculations_use_input_precision = 1; + for (do_background = ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD; + do_background <= ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN && !fail(pm); + ++do_background) + perform_gamma_composition_tests(pm, do_background, + pm->test_gamma_expand16); + if (!calculations_use_input_precision) + pm->calculations_use_input_precision = 0; + + if (summary) + summarize_gamma_errors(pm, "alpha mode", 1); + } +#endif +} +#endif /* PNG_READ_GAMMA_SUPPORTED */ +#endif /* PNG_READ_SUPPORTED */ + +/* INTERLACE MACRO VALIDATION */ +/* This is copied verbatim from the specification, it is simply the pass + * number in which each pixel in each 8x8 tile appears. The array must + * be indexed adam7[y][x] and notice that the pass numbers are based at + * 1, not 0 - the base libpng uses. + */ +static PNG_CONST +png_byte adam7[8][8] = +{ + { 1,6,4,6,2,6,4,6 }, + { 7,7,7,7,7,7,7,7 }, + { 5,6,5,6,5,6,5,6 }, + { 7,7,7,7,7,7,7,7 }, + { 3,6,4,6,3,6,4,6 }, + { 7,7,7,7,7,7,7,7 }, + { 5,6,5,6,5,6,5,6 }, + { 7,7,7,7,7,7,7,7 } +}; + +/* This routine validates all the interlace support macros in png.h for + * a variety of valid PNG widths and heights. It uses a number of similarly + * named internal routines that feed off the above array. + */ +static png_uint_32 +png_pass_start_row(int pass) +{ + int x, y; + ++pass; + for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) + return y; + return 0xf; +} + +static png_uint_32 +png_pass_start_col(int pass) +{ + int x, y; + ++pass; + for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) + return x; + return 0xf; +} + +static int +png_pass_row_shift(int pass) +{ + int x, y, base=(-1), inc=8; + ++pass; + for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) + { + if (base == (-1)) + base = y; + else if (base == y) + {} + else if (inc == y-base) + base=y; + else if (inc == 8) + inc = y-base, base=y; + else if (inc != y-base) + return 0xff; /* error - more than one 'inc' value! */ + } + + if (base == (-1)) return 0xfe; /* error - no row in pass! */ + + /* The shift is always 1, 2 or 3 - no pass has all the rows! */ + switch (inc) + { +case 2: return 1; +case 4: return 2; +case 8: return 3; +default: break; + } + + /* error - unrecognized 'inc' */ + return (inc << 8) + 0xfd; +} + +static int +png_pass_col_shift(int pass) +{ + int x, y, base=(-1), inc=8; + ++pass; + for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) + { + if (base == (-1)) + base = x; + else if (base == x) + {} + else if (inc == x-base) + base=x; + else if (inc == 8) + inc = x-base, base=x; + else if (inc != x-base) + return 0xff; /* error - more than one 'inc' value! */ + } + + if (base == (-1)) return 0xfe; /* error - no row in pass! */ + + /* The shift is always 1, 2 or 3 - no pass has all the rows! */ + switch (inc) + { +case 1: return 0; /* pass 7 has all the columns */ +case 2: return 1; +case 4: return 2; +case 8: return 3; +default: break; + } + + /* error - unrecognized 'inc' */ + return (inc << 8) + 0xfd; +} + +static png_uint_32 +png_row_from_pass_row(png_uint_32 yIn, int pass) +{ + /* By examination of the array: */ + switch (pass) + { +case 0: return yIn * 8; +case 1: return yIn * 8; +case 2: return yIn * 8 + 4; +case 3: return yIn * 4; +case 4: return yIn * 4 + 2; +case 5: return yIn * 2; +case 6: return yIn * 2 + 1; +default: break; + } + + return 0xff; /* bad pass number */ +} + +static png_uint_32 +png_col_from_pass_col(png_uint_32 xIn, int pass) +{ + /* By examination of the array: */ + switch (pass) + { +case 0: return xIn * 8; +case 1: return xIn * 8 + 4; +case 2: return xIn * 4; +case 3: return xIn * 4 + 2; +case 4: return xIn * 2; +case 5: return xIn * 2 + 1; +case 6: return xIn; +default: break; + } + + return 0xff; /* bad pass number */ +} + +static int +png_row_in_interlace_pass(png_uint_32 y, int pass) +{ + /* Is row 'y' in pass 'pass'? */ + int x; + y &= 7; + ++pass; + for (x=0; x<8; ++x) if (adam7[y][x] == pass) + return 1; + + return 0; +} + +static int +png_col_in_interlace_pass(png_uint_32 x, int pass) +{ + /* Is column 'x' in pass 'pass'? */ + int y; + x &= 7; + ++pass; + for (y=0; y<8; ++y) if (adam7[y][x] == pass) + return 1; + + return 0; +} + +static png_uint_32 +png_pass_rows(png_uint_32 height, int pass) +{ + png_uint_32 tiles = height>>3; + png_uint_32 rows = 0; + unsigned int x, y; + + height &= 7; + ++pass; + for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) + { + rows += tiles; + if (y < height) ++rows; + break; /* i.e. break the 'x', column, loop. */ + } + + return rows; +} + +static png_uint_32 +png_pass_cols(png_uint_32 width, int pass) +{ + png_uint_32 tiles = width>>3; + png_uint_32 cols = 0; + unsigned int x, y; + + width &= 7; + ++pass; + for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) + { + cols += tiles; + if (x < width) ++cols; + break; /* i.e. break the 'y', row, loop. */ + } + + return cols; +} + +static void +perform_interlace_macro_validation(void) +{ + /* The macros to validate, first those that depend only on pass: + * + * PNG_PASS_START_ROW(pass) + * PNG_PASS_START_COL(pass) + * PNG_PASS_ROW_SHIFT(pass) + * PNG_PASS_COL_SHIFT(pass) + */ + int pass; + + for (pass=0; pass<7; ++pass) + { + png_uint_32 m, f, v; + + m = PNG_PASS_START_ROW(pass); + f = png_pass_start_row(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_START_ROW(%d) = %u != %x\n", pass, m, f); + exit(1); + } + + m = PNG_PASS_START_COL(pass); + f = png_pass_start_col(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_START_COL(%d) = %u != %x\n", pass, m, f); + exit(1); + } + + m = PNG_PASS_ROW_SHIFT(pass); + f = png_pass_row_shift(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_ROW_SHIFT(%d) = %u != %x\n", pass, m, f); + exit(1); + } + + m = PNG_PASS_COL_SHIFT(pass); + f = png_pass_col_shift(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_COL_SHIFT(%d) = %u != %x\n", pass, m, f); + exit(1); + } + + /* Macros that depend on the image or sub-image height too: + * + * PNG_PASS_ROWS(height, pass) + * PNG_PASS_COLS(width, pass) + * PNG_ROW_FROM_PASS_ROW(yIn, pass) + * PNG_COL_FROM_PASS_COL(xIn, pass) + * PNG_ROW_IN_INTERLACE_PASS(y, pass) + * PNG_COL_IN_INTERLACE_PASS(x, pass) + */ + for (v=0;;) + { + /* First the base 0 stuff: */ + m = PNG_ROW_FROM_PASS_ROW(v, pass); + f = png_row_from_pass_row(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_ROW_FROM_PASS_ROW(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + m = PNG_COL_FROM_PASS_COL(v, pass); + f = png_col_from_pass_col(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_COL_FROM_PASS_COL(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + m = PNG_ROW_IN_INTERLACE_PASS(v, pass); + f = png_row_in_interlace_pass(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_ROW_IN_INTERLACE_PASS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + m = PNG_COL_IN_INTERLACE_PASS(v, pass); + f = png_col_in_interlace_pass(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_COL_IN_INTERLACE_PASS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + /* Then the base 1 stuff: */ + ++v; + m = PNG_PASS_ROWS(v, pass); + f = png_pass_rows(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_ROWS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + m = PNG_PASS_COLS(v, pass); + f = png_pass_cols(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_COLS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + /* Move to the next v - the stepping algorithm starts skipping + * values above 1024. + */ + if (v > 1024) + { + if (v == PNG_UINT_31_MAX) + break; + + v = (v << 1) ^ v; + if (v >= PNG_UINT_31_MAX) + v = PNG_UINT_31_MAX-1; + } + } + } +} + +/* Test color encodings. These values are back-calculated from the published + * chromaticities. The values are accurate to about 14 decimal places; 15 are + * given. These values are much more accurate than the ones given in the spec, + * which typically don't exceed 4 decimal places. This allows testing of the + * libpng code to its theoretical accuracy of 4 decimal places. (If pngvalid + * used the published errors the 'slack' permitted would have to be +/-.5E-4 or + * more.) + * + * The png_modifier code assumes that encodings[0] is sRGB and treats it + * specially: do not change the first entry in this list! + */ +static PNG_CONST color_encoding test_encodings[] = +{ +/* sRGB: must be first in this list! */ +/*gamma:*/ { 1/2.2, +/*red: */ { 0.412390799265959, 0.212639005871510, 0.019330818715592 }, +/*green:*/ { 0.357584339383878, 0.715168678767756, 0.119194779794626 }, +/*blue: */ { 0.180480788401834, 0.072192315360734, 0.950532152249660} }, +/* Kodak ProPhoto (wide gamut) */ +/*gamma:*/ { 1/1.6 /*approximate: uses 1.8 power law compared to sRGB 2.4*/, +/*red: */ { 0.797760489672303, 0.288071128229293, 0.000000000000000 }, +/*green:*/ { 0.135185837175740, 0.711843217810102, 0.000000000000000 }, +/*blue: */ { 0.031349349581525, 0.000085653960605, 0.825104602510460} }, +/* Adobe RGB (1998) */ +/*gamma:*/ { 1/(2+51./256), +/*red: */ { 0.576669042910131, 0.297344975250536, 0.027031361386412 }, +/*green:*/ { 0.185558237906546, 0.627363566255466, 0.070688852535827 }, +/*blue: */ { 0.188228646234995, 0.075291458493998, 0.991337536837639} }, +/* Adobe Wide Gamut RGB */ +/*gamma:*/ { 1/(2+51./256), +/*red: */ { 0.716500716779386, 0.258728243040113, 0.000000000000000 }, +/*green:*/ { 0.101020574397477, 0.724682314948566, 0.051211818965388 }, +/*blue: */ { 0.146774385252705, 0.016589442011321, 0.773892783545073} }, +}; + +/* signal handler + * + * This attempts to trap signals and escape without crashing. It needs a + * context pointer so that it can throw an exception (call longjmp) to recover + * from the condition; this is handled by making the png_modifier used by 'main' + * into a global variable. + */ +static png_modifier pm; + +static void signal_handler(int signum) +{ + + size_t pos = 0; + char msg[64]; + + pos = safecat(msg, sizeof msg, pos, "caught signal: "); + + switch (signum) + { + case SIGABRT: + pos = safecat(msg, sizeof msg, pos, "abort"); + break; + + case SIGFPE: + pos = safecat(msg, sizeof msg, pos, "floating point exception"); + break; + + case SIGILL: + pos = safecat(msg, sizeof msg, pos, "illegal instruction"); + break; + + case SIGINT: + pos = safecat(msg, sizeof msg, pos, "interrupt"); + break; + + case SIGSEGV: + pos = safecat(msg, sizeof msg, pos, "invalid memory access"); + break; + + case SIGTERM: + pos = safecat(msg, sizeof msg, pos, "termination request"); + break; + + default: + pos = safecat(msg, sizeof msg, pos, "unknown "); + pos = safecatn(msg, sizeof msg, pos, signum); + break; + } + + store_log(&pm.this, NULL/*png_structp*/, msg, 1/*error*/); + + /* And finally throw an exception so we can keep going, unless this is + * SIGTERM in which case stop now. + */ + if (signum != SIGTERM) + { + struct exception_context *the_exception_context = + &pm.this.exception_context; + + Throw &pm.this; + } + + else + exit(1); +} + +/* main program */ +int main(int argc, char **argv) +{ + volatile int summary = 1; /* Print the error summary at the end */ + volatile int memstats = 0; /* Print memory statistics at the end */ + + /* Create the given output file on success: */ + PNG_CONST char *volatile touch = NULL; + + /* This is an array of standard gamma values (believe it or not I've seen + * every one of these mentioned somewhere.) + * + * In the following list the most useful values are first! + */ + static double + gammas[]={2.2, 1.0, 2.2/1.45, 1.8, 1.5, 2.4, 2.5, 2.62, 2.9}; + + /* This records the command and arguments: */ + size_t cp = 0; + char command[1024]; + + anon_context(&pm.this); + + /* Add appropriate signal handlers, just the ANSI specified ones: */ + signal(SIGABRT, signal_handler); + signal(SIGFPE, signal_handler); + signal(SIGILL, signal_handler); + signal(SIGINT, signal_handler); + signal(SIGSEGV, signal_handler); + signal(SIGTERM, signal_handler); + +#ifdef HAVE_FEENABLEEXCEPT + /* Only required to enable FP exceptions on platforms where they start off + * disabled; this is not necessary but if it is not done pngvalid will likely + * end up ignoring FP conditions that other platforms fault. + */ + feenableexcept(FE_DIVBYZERO | FE_INVALID | FE_OVERFLOW); +#endif + + modifier_init(&pm); + + /* Preallocate the image buffer, because we know how big it needs to be, + * note that, for testing purposes, it is deliberately mis-aligned by tag + * bytes either side. All rows have an additional five bytes of padding for + * overwrite checking. + */ + store_ensure_image(&pm.this, NULL, 2, TRANSFORM_ROWMAX, TRANSFORM_HEIGHTMAX); + + /* Don't give argv[0], it's normally some horrible libtool string: */ + cp = safecat(command, sizeof command, cp, "pngvalid"); + + /* Default to error on warning: */ + pm.this.treat_warnings_as_errors = 1; + + /* Store the test gammas */ + pm.gammas = gammas; + pm.ngammas = (sizeof gammas) / (sizeof gammas[0]); + pm.ngamma_tests = 0; /* default to off */ + + /* And the test encodings */ + pm.encodings = test_encodings; + pm.nencodings = (sizeof test_encodings) / (sizeof test_encodings[0]); + + pm.sbitlow = 8U; /* because libpng doesn't do sBIT below 8! */ + /* The following allows results to pass if they correspond to anything in the + * transformed range [input-.5,input+.5]; this is is required because of the + * way libpng treates the 16_TO_8 flag when building the gamma tables. + * + * TODO: review this + */ + pm.use_input_precision_16to8 = 1U; + + /* Some default values (set the behavior for 'make check' here). + * These values simply control the maximum error permitted in the gamma + * transformations. The practial limits for human perception are described + * below (the setting for maxpc16), however for 8 bit encodings it isn't + * possible to meet the accepted capabilities of human vision - i.e. 8 bit + * images can never be good enough, regardless of encoding. + */ + pm.maxout8 = .1; /* Arithmetic error in *encoded* value */ + pm.maxabs8 = .00005; /* 1/20000 */ + pm.maxcalc8 = .004; /* +/-1 in 8 bits for compose errors */ + pm.maxpc8 = .499; /* I.e., .499% fractional error */ + pm.maxout16 = .499; /* Error in *encoded* value */ + pm.maxabs16 = .00005;/* 1/20000 */ + pm.maxcalc16 =.000015;/* +/-1 in 16 bits for compose errors */ + + /* NOTE: this is a reasonable perceptual limit. We assume that humans can + * perceive light level differences of 1% over a 100:1 range, so we need to + * maintain 1 in 10000 accuracy (in linear light space), which is what the + * following guarantees. It also allows significantly higher errors at + * higher 16 bit values, which is important for performance. The actual + * maximum 16 bit error is about +/-1.9 in the fixed point implementation but + * this is only allowed for values >38149 by the following: + */ + pm.maxpc16 = .005; /* I.e., 1/200% - 1/20000 */ + + /* Now parse the command line options. */ + while (--argc >= 1) + { + int catmore = 0; /* Set if the argument has an argument. */ + + /* Record each argument for posterity: */ + cp = safecat(command, sizeof command, cp, " "); + cp = safecat(command, sizeof command, cp, *++argv); + + if (strcmp(*argv, "-v") == 0) + pm.this.verbose = 1; + + else if (strcmp(*argv, "-l") == 0) + pm.log = 1; + + else if (strcmp(*argv, "-q") == 0) + summary = pm.this.verbose = pm.log = 0; + + else if (strcmp(*argv, "-w") == 0) + pm.this.treat_warnings_as_errors = 0; + + else if (strcmp(*argv, "--speed") == 0) + pm.this.speed = 1, pm.ngamma_tests = pm.ngammas, pm.test_standard = 0, + summary = 0; + + else if (strcmp(*argv, "--memory") == 0) + memstats = 1; + + else if (strcmp(*argv, "--size") == 0) + pm.test_size = 1; + + else if (strcmp(*argv, "--nosize") == 0) + pm.test_size = 0; + + else if (strcmp(*argv, "--standard") == 0) + pm.test_standard = 1; + + else if (strcmp(*argv, "--nostandard") == 0) + pm.test_standard = 0; + + else if (strcmp(*argv, "--transform") == 0) + pm.test_transform = 1; + + else if (strcmp(*argv, "--notransform") == 0) + pm.test_transform = 0; + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED + else if (strncmp(*argv, "--transform-disable=", + sizeof "--transform-disable") == 0) + { + pm.test_transform = 1; + transform_disable(*argv + sizeof "--transform-disable"); + } + + else if (strncmp(*argv, "--transform-enable=", + sizeof "--transform-enable") == 0) + { + pm.test_transform = 1; + transform_enable(*argv + sizeof "--transform-enable"); + } +#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ + + else if (strcmp(*argv, "--gamma") == 0) + { + /* Just do two gamma tests here (2.2 and linear) for speed: */ + pm.ngamma_tests = 2U; + pm.test_gamma_threshold = 1; + pm.test_gamma_transform = 1; + pm.test_gamma_sbit = 1; + pm.test_gamma_scale16 = 1; + pm.test_gamma_background = 1; + pm.test_gamma_alpha_mode = 1; + } + + else if (strcmp(*argv, "--nogamma") == 0) + pm.ngamma_tests = 0; + + else if (strcmp(*argv, "--gamma-threshold") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_threshold = 1; + + else if (strcmp(*argv, "--nogamma-threshold") == 0) + pm.test_gamma_threshold = 0; + + else if (strcmp(*argv, "--gamma-transform") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_transform = 1; + + else if (strcmp(*argv, "--nogamma-transform") == 0) + pm.test_gamma_transform = 0; + + else if (strcmp(*argv, "--gamma-sbit") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_sbit = 1; + + else if (strcmp(*argv, "--nogamma-sbit") == 0) + pm.test_gamma_sbit = 0; + + else if (strcmp(*argv, "--gamma-16-to-8") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_scale16 = 1; + + else if (strcmp(*argv, "--nogamma-16-to-8") == 0) + pm.test_gamma_scale16 = 0; + + else if (strcmp(*argv, "--gamma-background") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_background = 1; + + else if (strcmp(*argv, "--nogamma-background") == 0) + pm.test_gamma_background = 0; + + else if (strcmp(*argv, "--gamma-alpha-mode") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_alpha_mode = 1; + + else if (strcmp(*argv, "--nogamma-alpha-mode") == 0) + pm.test_gamma_alpha_mode = 0; + + else if (strcmp(*argv, "--expand16") == 0) + pm.test_gamma_expand16 = 1; + + else if (strcmp(*argv, "--noexpand16") == 0) + pm.test_gamma_expand16 = 0; + + else if (strcmp(*argv, "--more-gammas") == 0) + pm.ngamma_tests = 3U; + + else if (strcmp(*argv, "--all-gammas") == 0) + pm.ngamma_tests = pm.ngammas; + + else if (strcmp(*argv, "--progressive-read") == 0) + pm.this.progressive = 1; + + else if (strcmp(*argv, "--use-update-info") == 0) + ++pm.use_update_info; /* Can call multiple times */ + + else if (strcmp(*argv, "--interlace") == 0) + pm.interlace_type = PNG_INTERLACE_ADAM7; + + else if (strcmp(*argv, "--use-input-precision") == 0) + pm.use_input_precision = 1; + + else if (strcmp(*argv, "--calculations-use-input-precision") == 0) + pm.calculations_use_input_precision = 1; + + else if (strcmp(*argv, "--assume-16-bit-calculations") == 0) + pm.assume_16_bit_calculations = 1; + + else if (strcmp(*argv, "--calculations-follow-bit-depth") == 0) + pm.calculations_use_input_precision = + pm.assume_16_bit_calculations = 0; + + else if (strcmp(*argv, "--exhaustive") == 0) + pm.test_exhaustive = 1; + + else if (argc > 1 && strcmp(*argv, "--sbitlow") == 0) + --argc, pm.sbitlow = (png_byte)atoi(*++argv), catmore = 1; + + else if (argc > 1 && strcmp(*argv, "--touch") == 0) + --argc, touch = *++argv, catmore = 1; + + else if (argc > 1 && strncmp(*argv, "--max", 5) == 0) + { + --argc; + + if (strcmp(5+*argv, "abs8") == 0) + pm.maxabs8 = atof(*++argv); + + else if (strcmp(5+*argv, "abs16") == 0) + pm.maxabs16 = atof(*++argv); + + else if (strcmp(5+*argv, "calc8") == 0) + pm.maxcalc8 = atof(*++argv); + + else if (strcmp(5+*argv, "calc16") == 0) + pm.maxcalc16 = atof(*++argv); + + else if (strcmp(5+*argv, "out8") == 0) + pm.maxout8 = atof(*++argv); + + else if (strcmp(5+*argv, "out16") == 0) + pm.maxout16 = atof(*++argv); + + else if (strcmp(5+*argv, "pc8") == 0) + pm.maxpc8 = atof(*++argv); + + else if (strcmp(5+*argv, "pc16") == 0) + pm.maxpc16 = atof(*++argv); + + else + { + fprintf(stderr, "pngvalid: %s: unknown 'max' option\n", *argv); + exit(1); + } + + catmore = 1; + } + + else if (strcmp(*argv, "--log8") == 0) + --argc, pm.log8 = atof(*++argv), catmore = 1; + + else if (strcmp(*argv, "--log16") == 0) + --argc, pm.log16 = atof(*++argv), catmore = 1; + + else + { + fprintf(stderr, "pngvalid: %s: unknown argument\n", *argv); + exit(1); + } + + if (catmore) /* consumed an extra *argv */ + { + cp = safecat(command, sizeof command, cp, " "); + cp = safecat(command, sizeof command, cp, *argv); + } + } + + /* If pngvalid is run with no arguments default to a reasonable set of the + * tests. + */ + if (pm.test_standard == 0 && pm.test_size == 0 && pm.test_transform == 0 && + pm.ngamma_tests == 0) + { + /* Make this do all the tests done in the test shell scripts with the same + * parameters, where possible. The limitation is that all the progressive + * read and interlace stuff has to be done in separate runs, so only the + * basic 'standard' and 'size' tests are done. + */ + pm.test_standard = 1; + pm.test_size = 1; + pm.test_transform = 1; + pm.ngamma_tests = 2U; + } + + if (pm.ngamma_tests > 0 && + pm.test_gamma_threshold == 0 && pm.test_gamma_transform == 0 && + pm.test_gamma_sbit == 0 && pm.test_gamma_scale16 == 0 && + pm.test_gamma_background == 0 && pm.test_gamma_alpha_mode == 0) + { + pm.test_gamma_threshold = 1; + pm.test_gamma_transform = 1; + pm.test_gamma_sbit = 1; + pm.test_gamma_scale16 = 1; + pm.test_gamma_background = 1; + pm.test_gamma_alpha_mode = 1; + } + + else if (pm.ngamma_tests == 0) + { + /* Nothing to test so turn everything off: */ + pm.test_gamma_threshold = 0; + pm.test_gamma_transform = 0; + pm.test_gamma_sbit = 0; + pm.test_gamma_scale16 = 0; + pm.test_gamma_background = 0; + pm.test_gamma_alpha_mode = 0; + } + + Try + { + /* Make useful base images */ + make_transform_images(&pm.this); + + /* Perform the standard and gamma tests. */ + if (pm.test_standard) + { + perform_interlace_macro_validation(); + perform_formatting_test(&pm.this); +# ifdef PNG_READ_SUPPORTED + perform_standard_test(&pm); +# endif + perform_error_test(&pm); + } + + /* Various oddly sized images: */ + if (pm.test_size) + { + make_size_images(&pm.this); +# ifdef PNG_READ_SUPPORTED + perform_size_test(&pm); +# endif + } + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED + /* Combinatorial transforms: */ + if (pm.test_transform) + perform_transform_test(&pm); +#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ + +#ifdef PNG_READ_GAMMA_SUPPORTED + if (pm.ngamma_tests > 0) + perform_gamma_test(&pm, summary); +#endif + } + + Catch_anonymous + { + fprintf(stderr, "pngvalid: test aborted (probably failed in cleanup)\n"); + if (!pm.this.verbose) + { + if (pm.this.error[0] != 0) + fprintf(stderr, "pngvalid: first error: %s\n", pm.this.error); + + fprintf(stderr, "pngvalid: run with -v to see what happened\n"); + } + exit(1); + } + + if (summary) + { + printf("%s: %s (%s point arithmetic)\n", + (pm.this.nerrors || (pm.this.treat_warnings_as_errors && + pm.this.nwarnings)) ? "FAIL" : "PASS", + command, +#if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || PNG_LIBPNG_VER < 10500 + "floating" +#else + "fixed" +#endif + ); + } + + if (memstats) + { + printf("Allocated memory statistics (in bytes):\n" + "\tread %lu maximum single, %lu peak, %lu total\n" + "\twrite %lu maximum single, %lu peak, %lu total\n", + (unsigned long)pm.this.read_memory_pool.max_max, + (unsigned long)pm.this.read_memory_pool.max_limit, + (unsigned long)pm.this.read_memory_pool.max_total, + (unsigned long)pm.this.write_memory_pool.max_max, + (unsigned long)pm.this.write_memory_pool.max_limit, + (unsigned long)pm.this.write_memory_pool.max_total); + } + + /* Do this here to provoke memory corruption errors in memory not directly + * allocated by libpng - not a complete test, but better than nothing. + */ + store_delete(&pm.this); + + /* Error exit if there are any errors, and maybe if there are any + * warnings. + */ + if (pm.this.nerrors || (pm.this.treat_warnings_as_errors && + pm.this.nwarnings)) + { + if (!pm.this.verbose) + fprintf(stderr, "pngvalid: %s\n", pm.this.error); + + fprintf(stderr, "pngvalid: %d errors, %d warnings\n", pm.this.nerrors, + pm.this.nwarnings); + + exit(1); + } + + /* Success case. */ + if (touch != NULL) + { + FILE *fsuccess = fopen(touch, "wt"); + + if (fsuccess != NULL) + { + int error = 0; + fprintf(fsuccess, "PNG validation succeeded\n"); + fflush(fsuccess); + error = ferror(fsuccess); + + if (fclose(fsuccess) || error) + { + fprintf(stderr, "%s: write failed\n", touch); + exit(1); + } + } + + else + { + fprintf(stderr, "%s: open failed\n", touch); + exit(1); + } + } + + return 0; +} +#else /* write not supported */ +int main(void) +{ + fprintf(stderr, "pngvalid: no write support in libpng, all tests skipped\n"); + /* So the test is skipped: */ + return 77; +} +#endif diff --git a/src/SDL2/external/libpng-1.6.2/contrib/libtests/readpng.c b/src/SDL2/external/libpng-1.6.2/contrib/libtests/readpng.c new file mode 100644 index 000000000..7ba46d0b9 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/libtests/readpng.c @@ -0,0 +1,104 @@ +/* readpng.c + * + * Copyright (c) 2013 John Cunningham Bowler + * + * Last changed in libpng 1.6.1 [March 28, 2013] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Load an arbitrary number of PNG files (from the command line, or, if there + * are no arguments on the command line, from stdin) then run a time test by + * reading each file by row. The test does nothing with the read result and + * does no transforms. The only output is a time as a floating point number of + * seconds with 9 decimal digits. + */ +#include +#include +#include + +#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) +# include +#endif + +/* Define the following to use this test against your installed libpng, rather + * than the one being built here: + */ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../../png.h" +#endif + +static int +read_png(FILE *fp) +{ + png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING,0,0,0); + png_infop info_ptr = NULL; + png_bytep row = NULL, display = NULL; + + if (png_ptr == NULL) + return 0; + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + if (row != NULL) free(row); + if (display != NULL) free(display); + return 0; + } + + png_init_io(png_ptr, fp); + + info_ptr = png_create_info_struct(png_ptr); + if (info_ptr == NULL) + png_error(png_ptr, "OOM allocating info structure"); + + png_set_keep_unknown_chunks(png_ptr, PNG_HANDLE_CHUNK_ALWAYS, NULL, 0); + + png_read_info(png_ptr, info_ptr); + + { + png_size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr); + + row = malloc(rowbytes); + display = malloc(rowbytes); + + if (row == NULL || display == NULL) + png_error(png_ptr, "OOM allocating row buffers"); + + { + png_uint_32 height = png_get_image_height(png_ptr, info_ptr); + int passes = png_set_interlace_handling(png_ptr); + int pass; + + png_start_read_image(png_ptr); + + for (pass = 0; pass < passes; ++pass) + { + png_uint_32 y = height; + + /* NOTE: this trashes the row each time; interlace handling won't + * work, but this avoids memory thrashing for speed testing. + */ + while (y-- > 0) + png_read_row(png_ptr, row, display); + } + } + } + + /* Make sure to read to the end of the file: */ + png_read_end(png_ptr, info_ptr); + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + free(row); + free(display); + return 1; +} + +int +main(void) +{ + /* Exit code 0 on success. */ + return !read_png(stdin); +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/libtests/tarith.c b/src/SDL2/external/libpng-1.6.2/contrib/libtests/tarith.c new file mode 100644 index 000000000..cdb00dbf7 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/libtests/tarith.c @@ -0,0 +1,999 @@ + +/* tarith.c + * + * Copyright (c) 2011-2013 John Cunningham Bowler + * + * Last changed in libpng 1.6.0 [February 14, 2013] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Test internal arithmetic functions of libpng. + * + * This code must be linked against a math library (-lm), but does not require + * libpng or zlib to work. Because it includes the complete source of 'png.c' + * it tests the code with whatever compiler options are used to build it. + * Changing these options can substantially change the errors in the + * calculations that the compiler chooses! + */ +#define _POSIX_SOURCE 1 +#define _ISOC99_SOURCE 1 + +/* Obtain a copy of the code to be tested (plus other things), disabling + * stuff that is not required. + */ +#include +#include +#include +#include +#include + +#include "../../pngpriv.h" + +#define png_error png_warning + +void png_warning(png_const_structrp png_ptr, png_const_charp msg) +{ + fprintf(stderr, "validation: %s\n", msg); +} + +#define png_fixed_error png_fixed_warning + +void png_fixed_warning(png_const_structrp png_ptr, png_const_charp msg) +{ + fprintf(stderr, "overflow in: %s\n", msg); +} + +#define png_set_error_fn(pp, ep, efp, wfp) ((void)0) +#define png_malloc(pp, s) malloc(s) +#define png_malloc_warn(pp, s) malloc(s) +#define png_malloc_base(pp, s) malloc(s) +#define png_calloc(pp, s) calloc(1, (s)) +#define png_free(pp, s) free(s) + +#define png_safecat(b, sb, pos, str) (pos) +#define png_format_number(start, end, format, number) (start) + +#define crc32(crc, pp, s) (crc) +#define inflateReset(zs) Z_OK + +#define png_create_struct(type) (0) +#define png_destroy_struct(pp) ((void)0) +#define png_create_struct_2(type, m, mm) (0) +#define png_destroy_struct_2(pp, f, mm) ((void)0) + +#undef PNG_SIMPLIFIED_READ_SUPPORTED +#undef PNG_SIMPLIFIED_WRITE_SUPPORTED +#undef PNG_USER_MEM_SUPPORTED + +#include "../../png.c" + +/* Validate ASCII to fp routines. */ +static int verbose = 0; + +int validation_ascii_to_fp(int count, int argc, char **argv) +{ + int showall = 0; + double max_error=2; /* As a percentage error-in-last-digit/.5 */ + double max_error_abs=17; /* Used when precision is DBL_DIG */ + double max = 0; + double max_abs = 0; + double test = 0; /* Important to test this. */ + int precision = 5; + int nonfinite = 0; + int finite = 0; + int ok = 0; + int failcount = 0; + int minorarith = 0; + + while (--argc > 0) + if (strcmp(*++argv, "-a") == 0) + showall = 1; + else if (strcmp(*argv, "-e") == 0 && argc > 0) + { + --argc; + max_error = atof(*++argv); + } + else if (strcmp(*argv, "-E") == 0 && argc > 0) + { + --argc; + max_error_abs = atof(*++argv); + } + else + { + fprintf(stderr, "unknown argument %s\n", *argv); + return 1; + } + + do + { + png_size_t index; + int state, failed = 0; + char buffer[64]; + + if (isfinite(test)) + ++finite; + else + ++nonfinite; + + if (verbose) + fprintf(stderr, "%.*g %d\n", DBL_DIG, test, precision); + + /* Check for overflow in the buffer by setting a marker. */ + memset(buffer, 71, sizeof buffer); + + png_ascii_from_fp(0, buffer, precision+10, test, precision); + + /* Allow for a three digit exponent, this stuff will fail if + * the exponent is bigger than this! + */ + if (buffer[precision+7] != 71) + { + fprintf(stderr, "%g[%d] -> '%s'[%lu] buffer overflow\n", test, + precision, buffer, (unsigned long)strlen(buffer)); + failed = 1; + } + + /* Following are used for the number parser below and must be + * initialized to zero. + */ + state = 0; + index = 0; + if (!isfinite(test)) + { + /* Expect 'inf' */ + if (test >= 0 && strcmp(buffer, "inf") || + test < 0 && strcmp(buffer, "-inf")) + { + fprintf(stderr, "%g[%d] -> '%s' but expected 'inf'\n", test, + precision, buffer); + failed = 1; + } + } + else if (!png_check_fp_number(buffer, precision+10, &state, &index) || + buffer[index] != 0) + { + fprintf(stderr, "%g[%d] -> '%s' but has bad format ('%c')\n", test, + precision, buffer, buffer[index]); + failed = 1; + } + else if (PNG_FP_IS_NEGATIVE(state) && !(test < 0)) + { + fprintf(stderr, "%g[%d] -> '%s' but negative value not so reported\n", + test, precision, buffer); + failed = 1; + assert(!PNG_FP_IS_ZERO(state)); + assert(!PNG_FP_IS_POSITIVE(state)); + } + else if (PNG_FP_IS_ZERO(state) && !(test == 0)) + { + fprintf(stderr, "%g[%d] -> '%s' but zero value not so reported\n", + test, precision, buffer); + failed = 1; + assert(!PNG_FP_IS_NEGATIVE(state)); + assert(!PNG_FP_IS_POSITIVE(state)); + } + else if (PNG_FP_IS_POSITIVE(state) && !(test > 0)) + { + fprintf(stderr, "%g[%d] -> '%s' but postive value not so reported\n", + test, precision, buffer); + failed = 1; + assert(!PNG_FP_IS_NEGATIVE(state)); + assert(!PNG_FP_IS_ZERO(state)); + } + else + { + /* Check the result against the original. */ + double out = atof(buffer); + double change = fabs((out - test)/test); + double allow = .5/pow(10, + (precision >= DBL_DIG) ? DBL_DIG-1 : precision-1); + + /* NOTE: if you hit this error case are you compiling with gcc + * and -O0? Try -O2 - the errors can accumulate if the FP + * code above is not optimized and may drift outside the .5 in + * DBL_DIG allowed. In any case a small number of errors may + * occur (very small ones - 1 or 2%) because of rounding in the + * calculations, either in the conversion API or in atof. + */ + if (change >= allow && (isfinite(out) || + fabs(test/DBL_MAX) <= 1-allow)) + { + double percent = (precision >= DBL_DIG) ? max_error_abs : max_error; + double allowp = (change-allow)*100/allow; + + if (precision >= DBL_DIG) + { + if (max_abs < allowp) max_abs = allowp; + } + + else + { + if (max < allowp) max = allowp; + } + + if (showall || allowp >= percent) + { + fprintf(stderr, + "%.*g[%d] -> '%s' -> %.*g number changed (%g > %g (%d%%))\n", + DBL_DIG, test, precision, buffer, DBL_DIG, out, change, allow, + (int)round(allowp)); + failed = 1; + } + else + ++minorarith; + } + } + + if (failed) + ++failcount; + else + ++ok; + +skip: + /* Generate a new number and precision. */ + precision = rand(); + if (precision & 1) test = -test; + precision >>= 1; + + /* Generate random numbers. */ + if (test == 0 || !isfinite(test)) + test = precision+1; + else + { + /* Derive the exponent from the previous rand() value. */ + int exponent = precision % (DBL_MAX_EXP - DBL_MIN_EXP) + DBL_MIN_EXP; + int tmp; + test = frexp(test * rand(), &tmp); + test = ldexp(test, exponent); + precision >>= 8; /* arbitrary */ + } + + /* This limits the precision to 32 digits, enough for standard + * IEEE implementations which have at most 15 digits. + */ + precision = (precision & 0x1f) + 1; + } + while (--count); + + printf("Tested %d finite values, %d non-finite, %d OK (%d failed) %d minor " + "arithmetic errors\n", finite, nonfinite, ok, failcount, minorarith); + printf(" Error with >=%d digit precision %.2f%%\n", DBL_DIG, max_abs); + printf(" Error with < %d digit precision %.2f%%\n", DBL_DIG, max); + + return 0; +} + +/* Observe that valid FP numbers have the forms listed in the PNG extensions + * specification: + * + * [+,-]{integer,integer.fraction,.fraction}[{e,E}[+,-]integer] + * + * Test each of these in turn, including invalid cases. + */ +typedef enum checkfp_state +{ + start, fraction, exponent, states +} checkfp_state; + +/* The characters (other than digits) that characterize the states: */ +static const char none[] = ""; +static const char hexdigits[16] = "0123456789ABCDEF"; + +static const struct +{ + const char *start; /* Characters valid at the start */ + const char *end; /* Valid characters that end the state */ + const char *tests; /* Characters to test after 2 digits seen */ +} +state_characters[states] = +{ + /* start: */ { "+-.", ".eE", "+-.e*0369" }, + /* fraction: */ { none, "eE", "+-.E#0147" }, + /* exponent: */ { "+-", none, "+-.eE^0258" } +}; + +typedef struct +{ + char number[1024]; /* Buffer for number being tested */ + int limit; /* Command line limit */ + int verbose; /* Shadows global variable */ + int ctimes; /* Number of numbers tested */ + int cmillions; /* Count of millions of numbers */ + int cinvalid; /* Invalid strings checked */ + int cnoaccept; /* Characters not accepted */ +} +checkfp_command; + +typedef struct +{ + int cnumber; /* Index into number string */ + checkfp_state check_state; /* Current number state */ + int at_start; /* At start (first character) of state */ + int cdigits_in_state; /* Digits seen in that state */ + int limit; /* Limit on same for checking all chars */ + int state; /* Current parser state */ + int is_negative; /* Number is negative */ + int is_zero; /* Number is (still) zero */ + int number_was_valid; /* Previous character validity */ +} +checkfp_control; + +static int check_all_characters(checkfp_command *co, checkfp_control c); + +static int check_some_characters(checkfp_command *co, checkfp_control c, + const char *tests); + +static int check_one_character(checkfp_command *co, checkfp_control c, int ch) +{ + /* Test this character (ch) to ensure the parser does the correct thing. + */ + png_size_t index = 0; + const char test = (char)ch; + const int number_is_valid = png_check_fp_number(&test, 1, &c.state, &index); + const int character_accepted = (index == 1); + + if (c.check_state != exponent && isdigit(ch) && ch != '0') + c.is_zero = 0; + + if (c.check_state == start && c.at_start && ch == '-') + c.is_negative = 1; + + if (isprint(ch)) + co->number[c.cnumber++] = (char)ch; + else + { + co->number[c.cnumber++] = '<'; + co->number[c.cnumber++] = hexdigits[(ch >> 4) & 0xf]; + co->number[c.cnumber++] = hexdigits[ch & 0xf]; + co->number[c.cnumber++] = '>'; + } + co->number[c.cnumber] = 0; + + if (co->verbose > 1) + fprintf(stderr, "%s\n", co->number); + + if (++(co->ctimes) == 1000000) + { + if (co->verbose == 1) + fputc('.', stderr); + co->ctimes = 0; + ++(co->cmillions); + } + + if (!number_is_valid) + ++(co->cinvalid); + + if (!character_accepted) + ++(co->cnoaccept); + + /* This should never fail (it's a serious bug if it does): */ + if (index != 0 && index != 1) + { + fprintf(stderr, "%s: read beyond end of string (%lu)\n", co->number, + (unsigned long)index); + return 0; + } + + /* Validate the new state, note that the PNG_FP_IS_ macros all return + * false unless the number is valid. + */ + if (PNG_FP_IS_NEGATIVE(c.state) != + (number_is_valid && !c.is_zero && c.is_negative)) + { + fprintf(stderr, "%s: negative when it is not\n", co->number); + return 0; + } + + if (PNG_FP_IS_ZERO(c.state) != (number_is_valid && c.is_zero)) + { + fprintf(stderr, "%s: zero when it is not\n", co->number); + return 0; + } + + if (PNG_FP_IS_POSITIVE(c.state) != + (number_is_valid && !c.is_zero && !c.is_negative)) + { + fprintf(stderr, "%s: positive when it is not\n", co->number); + return 0; + } + + /* Testing a digit */ + if (isdigit(ch)) + { + if (!character_accepted) + { + fprintf(stderr, "%s: digit '%c' not accepted\n", co->number, ch); + return 0; + } + + if (!number_is_valid) + { + fprintf(stderr, "%s: saw a digit (%c) but number not valid\n", + co->number, ch); + return 0; + } + + ++c.cdigits_in_state; + c.at_start = 0; + c.number_was_valid = 1; + + /* Continue testing characters in this state. Either test all of + * them or, if we have already seen one digit in this state, just test a + * limited set. + */ + if (c.cdigits_in_state < 1) + return check_all_characters(co, c); + + else + return check_some_characters(co, c, + state_characters[c.check_state].tests); + } + + /* A non-digit; is it allowed here? */ + else if (((ch == '+' || ch == '-') && c.check_state != fraction && + c.at_start) || + (ch == '.' && c.check_state == start) || + ((ch == 'e' || ch == 'E') && c.number_was_valid && + c.check_state != exponent)) + { + if (!character_accepted) + { + fprintf(stderr, "%s: character '%c' not accepted\n", co->number, ch); + return 0; + } + + /* The number remains valid after start of fraction but nowhere else. */ + if (number_is_valid && (c.check_state != start || ch != '.')) + { + fprintf(stderr, "%s: saw a non-digit (%c) but number valid\n", + co->number, ch); + return 0; + } + + c.number_was_valid = number_is_valid; + + /* Check for a state change. When changing to 'fraction' if the number + * is valid at this point set the at_start to false to allow an exponent + * 'e' to come next. + */ + if (c.check_state == start && ch == '.') + { + c.check_state = fraction; + c.at_start = !number_is_valid; + c.cdigits_in_state = 0; + c.limit = co->limit; + return check_all_characters(co, c); + } + + else if (c.check_state < exponent && (ch == 'e' || ch == 'E')) + { + c.check_state = exponent; + c.at_start = 1; + c.cdigits_in_state = 0; + c.limit = co->limit; + return check_all_characters(co, c); + } + + /* Else it was a sign, and the state doesn't change. */ + else + { + if (ch != '-' && ch != '+') + { + fprintf(stderr, "checkfp: internal error (1)\n"); + return 0; + } + + c.at_start = 0; + return check_all_characters(co, c); + } + } + + /* Testing an invalid character */ + else + { + if (character_accepted) + { + fprintf(stderr, "%s: character '%c' [0x%.2x] accepted\n", co->number, + ch, ch); + return 0; + } + + if (number_is_valid != c.number_was_valid) + { + fprintf(stderr, + "%s: character '%c' [0x%.2x] changed number validity\n", co->number, + ch, ch); + return 0; + } + + /* Do nothing - the parser has stuck; return success and keep going with + * the next character. + */ + } + + /* Successful return (the caller will try the next character.) */ + return 1; +} + +static int check_all_characters(checkfp_command *co, checkfp_control c) +{ + int ch; + + if (c.cnumber+4 < sizeof co->number) for (ch=0; ch<256; ++ch) + { + if (!check_one_character(co, c, ch)) + return 0; + } + + return 1; +} + +static int check_some_characters(checkfp_command *co, checkfp_control c, + const char *tests) +{ + int i; + + --(c.limit); + + if (c.cnumber+4 < sizeof co->number && c.limit >= 0) + { + if (c.limit > 0) for (i=0; tests[i]; ++i) + { + if (!check_one_character(co, c, tests[i])) + return 0; + } + + /* At the end check all the characters. */ + else + return check_all_characters(co, c); + } + + return 1; +} + +int validation_checkfp(int count, int argc, char **argv) +{ + int result; + checkfp_command command; + checkfp_control control; + + command.number[0] = 0; + command.limit = 3; + command.verbose = verbose; + command.ctimes = 0; + command.cmillions = 0; + command.cinvalid = 0; + command.cnoaccept = 0; + + while (--argc > 0) + { + ++argv; + if (argc > 1 && strcmp(*argv, "-l") == 0) + { + --argc; + command.limit = atoi(*++argv); + } + + else + { + fprintf(stderr, "unknown argument %s\n", *argv); + return 1; + } + } + + control.cnumber = 0; + control.check_state = start; + control.at_start = 1; + control.cdigits_in_state = 0; + control.limit = command.limit; + control.state = 0; + control.is_negative = 0; + control.is_zero = 1; + control.number_was_valid = 0; + + result = check_all_characters(&command, control); + + printf("checkfp: %s: checked %d,%.3d,%.3d,%.3d strings (%d invalid)\n", + result ? "pass" : "FAIL", command.cmillions / 1000, + command.cmillions % 1000, command.ctimes / 1000, command.ctimes % 1000, + command.cinvalid); + + return result; +} + +int validation_muldiv(int count, int argc, char **argv) +{ + int tested = 0; + int overflow = 0; + int error = 0; + int error64 = 0; + int passed = 0; + int randbits = 0; + png_uint_32 randbuffer; + png_fixed_point a; + png_int_32 times, div; + + while (--argc > 0) + { + fprintf(stderr, "unknown argument %s\n", *++argv); + return 1; + } + + /* Find out about the random number generator. */ + randbuffer = RAND_MAX; + while (randbuffer != 0) ++randbits, randbuffer >>= 1; + printf("Using random number generator that makes %d bits\n", randbits); + for (div=0; div<32; div += randbits) + randbuffer = (randbuffer << randbits) ^ rand(); + + a = 0; + times = div = 0; + do + { + png_fixed_point result; + /* NOTE: your mileage may vary, a type is required below that can + * hold 64 bits or more, if floating point is used a 64 bit or + * better mantissa is required. + */ + long long int fp, fpround; + unsigned long hi, lo; + int ok; + + /* Check the values, png_64bit_product can only handle positive + * numbers, so correct for that here. + */ + { + long u1, u2; + int n = 0; + if (a < 0) u1 = -a, n = 1; else u1 = a; + if (times < 0) u2 = -times, n = !n; else u2 = times; + png_64bit_product(u1, u2, &hi, &lo); + if (n) + { + /* -x = ~x+1 */ + lo = ((~lo) + 1) & 0xffffffff; + hi = ~hi; + if (lo == 0) ++hi; + } + } + + fp = a; + fp *= times; + if ((fp & 0xffffffff) != lo || ((fp >> 32) & 0xffffffff) != hi) + { + fprintf(stderr, "png_64bit_product %d * %d -> %lx|%.8lx not %llx\n", + a, times, hi, lo, fp); + ++error64; + } + + if (div != 0) + { + /* Round - this is C round to zero. */ + if ((fp < 0) != (div < 0)) + fp -= div/2; + else + fp += div/2; + + fp /= div; + fpround = fp; + /* Assume 2's complement here: */ + ok = fpround <= PNG_UINT_31_MAX && + fpround >= -1-(long long int)PNG_UINT_31_MAX; + if (!ok) ++overflow; + } + else + ok = 0, ++overflow, fpround = fp/*misleading*/; + + if (verbose) + fprintf(stderr, "TEST %d * %d / %d -> %lld (%s)\n", a, times, div, + fp, ok ? "ok" : "overflow"); + + ++tested; + if (png_muldiv(&result, a, times, div) != ok) + { + ++error; + if (ok) + fprintf(stderr, "%d * %d / %d -> overflow (expected %lld)\n", a, + times, div, fp); + else + fprintf(stderr, "%d * %d / %d -> %d (expected overflow %lld)\n", a, + times, div, result, fp); + } + else if (ok && result != fpround) + { + ++error; + fprintf(stderr, "%d * %d / %d -> %d not %lld\n", a, times, div, result, + fp); + } + else + ++passed; + + /* Generate three new values, this uses rand() and rand() only returns + * up to RAND_MAX. + */ + /* CRUDE */ + a += times; + times += div; + div = randbuffer; + randbuffer = (randbuffer << randbits) ^ rand(); + } + while (--count > 0); + + printf("%d tests including %d overflows, %d passed, %d failed (%d 64 bit " + "errors)\n", tested, overflow, passed, error, error64); + return 0; +} + +/* When FP is on this just becomes a speed test - compile without FP to get real + * validation. + */ +#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED +#define LN2 .000010576586617430806112933839 /* log(2)/65536 */ +#define L2INV 94548.46219969910586572651 /* 65536/log(2) */ + +/* For speed testing, need the internal functions too: */ +static png_uint_32 png_log8bit(unsigned x) +{ + if (x > 0) + return (png_uint_32)floor(.5-log(x/255.)*L2INV); + + return 0xffffffff; +} + +static png_uint_32 png_log16bit(png_uint_32 x) +{ + if (x > 0) + return (png_uint_32)floor(.5-log(x/65535.)*L2INV); + + return 0xffffffff; +} + +static png_uint_32 png_exp(png_uint_32 x) +{ + return (png_uint_32)floor(.5 + exp(x * -LN2) * 0xffffffffU); +} + +static png_byte png_exp8bit(png_uint_32 log) +{ + return (png_byte)floor(.5 + exp(log * -LN2) * 255); +} + +static png_uint_16 png_exp16bit(png_uint_32 log) +{ + return (png_uint_16)floor(.5 + exp(log * -LN2) * 65535); +} +#endif /* FLOATING_ARITHMETIC */ + +int validation_gamma(int argc, char **argv) +{ + double gamma[9] = { 2.2, 1.8, 1.52, 1.45, 1., 1/1.45, 1/1.52, 1/1.8, 1/2.2 }; + double maxerr; + int i, silent=0, onlygamma=0; + + /* Silence the output with -s, just test the gamma functions with -g: */ + while (--argc > 0) + if (strcmp(*++argv, "-s") == 0) + silent = 1; + else if (strcmp(*argv, "-g") == 0) + onlygamma = 1; + else + { + fprintf(stderr, "unknown argument %s\n", *argv); + return 1; + } + + if (!onlygamma) + { + /* First validate the log functions: */ + maxerr = 0; + for (i=0; i<256; ++i) + { + double correct = -log(i/255.)/log(2.)*65536; + double error = png_log8bit(i) - correct; + + if (i != 0 && fabs(error) > maxerr) + maxerr = fabs(error); + + if (i == 0 && png_log8bit(i) != 0xffffffff || + i != 0 && png_log8bit(i) != floor(correct+.5)) + { + fprintf(stderr, "8 bit log error: %d: got %u, expected %f\n", + i, png_log8bit(i), correct); + } + } + + if (!silent) + printf("maximum 8 bit log error = %f\n", maxerr); + + maxerr = 0; + for (i=0; i<65536; ++i) + { + double correct = -log(i/65535.)/log(2.)*65536; + double error = png_log16bit(i) - correct; + + if (i != 0 && fabs(error) > maxerr) + maxerr = fabs(error); + + if (i == 0 && png_log16bit(i) != 0xffffffff || + i != 0 && png_log16bit(i) != floor(correct+.5)) + { + if (error > .68) /* By experiment error is less than .68 */ + { + fprintf(stderr, "16 bit log error: %d: got %u, expected %f" + " error: %f\n", i, png_log16bit(i), correct, error); + } + } + } + + if (!silent) + printf("maximum 16 bit log error = %f\n", maxerr); + + /* Now exponentiations. */ + maxerr = 0; + for (i=0; i<=0xfffff; ++i) + { + double correct = exp(-i/65536. * log(2.)) * (65536. * 65536); + double error = png_exp(i) - correct; + + if (fabs(error) > maxerr) + maxerr = fabs(error); + if (fabs(error) > 1883) /* By experiment. */ + { + fprintf(stderr, "32 bit exp error: %d: got %u, expected %f" + " error: %f\n", i, png_exp(i), correct, error); + } + } + + if (!silent) + printf("maximum 32 bit exp error = %f\n", maxerr); + + maxerr = 0; + for (i=0; i<=0xfffff; ++i) + { + double correct = exp(-i/65536. * log(2.)) * 255; + double error = png_exp8bit(i) - correct; + + if (fabs(error) > maxerr) + maxerr = fabs(error); + if (fabs(error) > .50002) /* By experiment */ + { + fprintf(stderr, "8 bit exp error: %d: got %u, expected %f" + " error: %f\n", i, png_exp8bit(i), correct, error); + } + } + + if (!silent) + printf("maximum 8 bit exp error = %f\n", maxerr); + + maxerr = 0; + for (i=0; i<=0xfffff; ++i) + { + double correct = exp(-i/65536. * log(2.)) * 65535; + double error = png_exp16bit(i) - correct; + + if (fabs(error) > maxerr) + maxerr = fabs(error); + if (fabs(error) > .524) /* By experiment */ + { + fprintf(stderr, "16 bit exp error: %d: got %u, expected %f" + " error: %f\n", i, png_exp16bit(i), correct, error); + } + } + + if (!silent) + printf("maximum 16 bit exp error = %f\n", maxerr); + } /* !onlygamma */ + + /* Test the overall gamma correction. */ + for (i=0; i<9; ++i) + { + unsigned j; + double g = gamma[i]; + png_fixed_point gfp = floor(g * PNG_FP_1 + .5); + + if (!silent) + printf("Test gamma %f\n", g); + + maxerr = 0; + for (j=0; j<256; ++j) + { + double correct = pow(j/255., g) * 255; + png_byte out = png_gamma_8bit_correct(j, gfp); + double error = out - correct; + + if (fabs(error) > maxerr) + maxerr = fabs(error); + if (out != floor(correct+.5)) + { + fprintf(stderr, "8bit %d ^ %f: got %d expected %f error %f\n", + j, g, out, correct, error); + } + } + + if (!silent) + printf("gamma %f: maximum 8 bit error %f\n", g, maxerr); + + maxerr = 0; + for (j=0; j<65536; ++j) + { + double correct = pow(j/65535., g) * 65535; + png_uint_16 out = png_gamma_16bit_correct(j, gfp); + double error = out - correct; + + if (fabs(error) > maxerr) + maxerr = fabs(error); + if (fabs(error) > 1.62) + { + fprintf(stderr, "16bit %d ^ %f: got %d expected %f error %f\n", + j, g, out, correct, error); + } + } + + if (!silent) + printf("gamma %f: maximum 16 bit error %f\n", g, maxerr); + } + + return 0; +} + +/**************************** VALIDATION TESTS ********************************/ +/* Various validation routines are included herein, they require some + * definition for png_warning and png_error, seetings of VALIDATION: + * + * 1: validates the ASCII to floating point conversions + * 2: validates png_muldiv + * 3: accuracy test of fixed point gamma tables + */ + +/* The following COUNT (10^8) takes about 1 hour on a 1GHz Pentium IV + * processor. + */ +#define COUNT 1000000000 + +int main(int argc, char **argv) +{ + int count = COUNT; + + while (argc > 1) + { + if (argc > 2 && strcmp(argv[1], "-c") == 0) + { + count = atoi(argv[2]); + argc -= 2; + argv += 2; + } + + else if (strcmp(argv[1], "-v") == 0) + { + ++verbose; + --argc; + ++argv; + } + + else + break; + } + + if (count > 0 && argc > 1) + { + if (strcmp(argv[1], "ascii") == 0) + return validation_ascii_to_fp(count, argc-1, argv+1); + else if (strcmp(argv[1], "checkfp") == 0) + return validation_checkfp(count, argc-1, argv+1); + else if (strcmp(argv[1], "muldiv") == 0) + return validation_muldiv(count, argc-1, argv+1); + else if (strcmp(argv[1], "gamma") == 0) + return validation_gamma(argc-1, argv+1); + } + + /* Bad argument: */ + fprintf(stderr, + "usage: tarith [-v] [-c count] {ascii,muldiv,gamma} [args]\n"); + fprintf(stderr, " arguments: ascii [-a (all results)] [-e error%%]\n"); + fprintf(stderr, " checkfp [-l max-number-chars]\n"); + fprintf(stderr, " muldiv\n"); + fprintf(stderr, " gamma -s (silent) -g (only gamma; no log)\n"); + return 1; +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/libtests/timepng.c b/src/SDL2/external/libpng-1.6.2/contrib/libtests/timepng.c new file mode 100644 index 000000000..523627f38 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/libtests/timepng.c @@ -0,0 +1,303 @@ +/* timepng.c + * + * Copyright (c) 2013 John Cunningham Bowler + * + * Last changed in libpng 1.6.1 [March 28, 2013] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Load an arbitrary number of PNG files (from the command line, or, if there + * are no arguments on the command line, from stdin) then run a time test by + * reading each file by row. The test does nothing with the read result and + * does no transforms. The only output is a time as a floating point number of + * seconds with 9 decimal digits. + */ +#define _POSIX_C_SOURCE 199309L /* for clock_gettime */ + +#include +#include +#include + +#include + +#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) +# include +#endif + +/* Define the following to use this test against your installed libpng, rather + * than the one being built here: + */ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../../png.h" +#endif + +static int read_png(FILE *fp) +{ + png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING,0,0,0); + png_infop info_ptr = NULL; + png_bytep row = NULL, display = NULL; + + if (png_ptr == NULL) + return 0; + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + if (row != NULL) free(row); + if (display != NULL) free(display); + return 0; + } + + png_init_io(png_ptr, fp); + + info_ptr = png_create_info_struct(png_ptr); + if (info_ptr == NULL) + png_error(png_ptr, "OOM allocating info structure"); + + png_read_info(png_ptr, info_ptr); + + { + png_size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr); + + row = malloc(rowbytes); + display = malloc(rowbytes); + + if (row == NULL || display == NULL) + png_error(png_ptr, "OOM allocating row buffers"); + + { + png_uint_32 height = png_get_image_height(png_ptr, info_ptr); + int passes = png_set_interlace_handling(png_ptr); + int pass; + + png_start_read_image(png_ptr); + + for (pass = 0; pass < passes; ++pass) + { + png_uint_32 y = height; + + /* NOTE: this trashes the row each time; interlace handling won't + * work, but this avoids memory thrashing for speed testing. + */ + while (y-- > 0) + png_read_row(png_ptr, row, display); + } + } + } + + /* Make sure to read to the end of the file: */ + png_read_end(png_ptr, info_ptr); + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + free(row); + free(display); + return 1; +} + +static int mytime(struct timespec *t) +{ + /* Do the timing using clock_gettime and the per-process timer. */ + if (!clock_gettime(CLOCK_PROCESS_CPUTIME_ID, t)) + return 1; + + perror("CLOCK_PROCESS_CPUTIME_ID"); + fprintf(stderr, "timepng: could not get the time\n"); + return 0; +} + +static int perform_one_test(FILE *fp, int nfiles) +{ + int i; + struct timespec before, after; + + /* Clear out all errors: */ + rewind(fp); + + if (mytime(&before)) + { + for (i=0; i 1) + { + int i; + + for (i=1; i 0) + ok = perform_one_test(fp, nfiles); + + else + fprintf(stderr, "usage: timepng {files} or ls files | timepng\n"); + } + + (void)fclose(fp); + } + + else + fprintf(stderr, "timepng: could not open temporary file\n"); + + /* Exit code 0 on success. */ + return ok == 0; +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/README b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/README new file mode 100644 index 000000000..e17fe35b6 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/README @@ -0,0 +1,5 @@ + +This demonstrates the use of PNG_USER_CONFIG, pngusr.h and pngusr.dfa +to build minimal decoder, encoder, and progressive reader applications. + +See the individual README and pngusr.dfa files for more explanation. diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/README b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/README new file mode 100644 index 000000000..fa979fcb7 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/README @@ -0,0 +1,10 @@ +This demonstrates the use of PNG_USER_CONFIG, pngusr.h and pngusr.dfa + +The makefile builds a minimal read-only decoder with embedded libpng +and zlib. + +Specify the location of the zlib source (1.2.1 or later) as ZLIBSRC +on the make command line. + +If you prefer to use the shared libraries, go to contrib/pngminus +and build the png2pnm application there. diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/makefile b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/makefile new file mode 100644 index 000000000..dafba64b7 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/makefile @@ -0,0 +1,150 @@ +# Makefile for PngMinus (pngm2pnm) +# Linux / Unix + +#CC=cc +CC=gcc +LD=$(CC) + +# If awk fails try +# make AWK=nawk + +# If cpp fails try +# make CPP=/lib/cpp + +RM=rm -f +COPY=cp + +CFLAGS=-DPNG_USER_CONFIG -DNO_GZCOMPRESS -DZ_SOLO -DNO_GZIP -I. -O1 + +C=.c +O=.o +L=.a +E= + +# Where to find the source code: +PNGSRC =../../.. +ZLIBSRC=$(PNGSRC)/../zlib +PROGSRC=$(PNGSRC)/contrib/pngminus + +# Zlib (minimal inflate requirements - crc32 is used by libpng) +# zutil can be eliminated if you provide your own zcalloc and zcfree +ZSRCS = adler32$(C) crc32$(C) \ + inffast$(C) inflate$(C) inftrees$(C) \ + zutil$(C) + +# Standard headers +ZH = zlib.h crc32.h inffast.h inffixed.h \ + inflate.h inftrees.h zutil.h + +# Machine generated headers +ZCONF = zconf.h + +# Headers callers use +ZINC = zlib.h $(ZCONF) + +# Headers the Zlib source uses +ZHDRS = $(ZH) $(ZCONF) + +ZOBJS = adler32$(O) crc32$(O) \ + inffast$(O) inflate$(O) inftrees$(O) \ + zutil$(O) + +# libpng +PNGSRCS=png$(C) pngerror$(C) pngget$(C) pngmem$(C) \ + pngread$(C) pngrio$(C) pngrtran$(C) pngrutil$(C) \ + pngset$(C) pngtrans$(C) + +# Standard headers +PNGH =png.h pngconf.h pngdebug.h pnginfo.h pngpriv.h pngstruct.h + +# Machine generated headers +PNGCONF=pnglibconf.h + +# Headers callers use +PNGINC= png.h pngconf.h pngusr.h $(PNGCONF) + +# Headers the PNG library uses +PNGHDRS=$(PNGH) $(PNGCONF) pngusr.h + +PNGOBJS=png$(O) pngerror$(O) pngget$(O) pngmem$(O) \ + pngread$(O) pngrio$(O) pngrtran$(O) pngrutil$(O) \ + pngset$(O) pngtrans$(O) + +PROGSRCS= pngm2pnm$(C) +PROGHDRS= +PROGDOCS= +PROGOBJS= pngm2pnm$(O) + +OBJS = $(PROGOBJS) $(PNGOBJS) $(ZOBJS) + +# implicit make rules ------------------------------------------------------- + +# note: dependencies do not work on implicit rule lines +.c$(O): + $(CC) -c $(CFLAGS) $< + +# dependencies + +all: pngm2pnm$(E) + +pngm2pnm$(E): $(OBJS) + $(LD) -o pngm2pnm$(E) $(OBJS) + +# The DFA_XTRA setting turns all libpng options off then +# turns on those required for this minimal build. +# The CPP_FLAGS setting causes pngusr.h to be included in +# both the build of pnglibconf.h and, subsequently, when +# building libpng itself. +$(PNGCONF): $(PNGSRC)/scripts/pnglibconf.mak\ + $(PNGSRC)/scripts/pnglibconf.dfa \ + $(PNGSRC)/scripts/options.awk pngusr.h pngusr.dfa + $(RM) pnglibconf.h pnglibconf.dfn + $(MAKE) $(MAKEFLAGS) -f $(PNGSRC)/scripts/pnglibconf.mak\ + srcdir=$(PNGSRC) CPPFLAGS="-DPNG_USER_CONFIG"\ + DFA_XTRA="pngusr.dfa" $@ + +clean: + $(MAKE) $(MAKEFLAGS) -f $(PNGSRC)/scripts/pnglibconf.mak\ + srcdir=$(PNGSRC) clean + $(RM) pngm2pnm$(O) + $(RM) pngm2pnm$(E) + $(RM) $(OBJS) + +# distclean also removes the copied source and headers +distclean: clean + $(RM) -r scripts # historical reasons + $(RM) $(PNGSRCS) $(PNGH) + $(RM) $(ZSRCS) $(ZH) $(ZCONF) + $(RM) $(PROGSRCS) $(PROGHDRS) $(PROGDOCS) + +# Header file dependencies: +$(PROGOBJS): $(PROGHDRS) $(PNGINC) $(ZINC) +$(PNGOBJS): $(PNGHDRS) $(ZINC) +$(ZOBJS): $(ZHDRS) + +# Gather the source code from the respective directories +$(PNGSRCS) $(PNGH): $(PNGSRC)/$@ + $(RM) $@ + $(COPY) $(PNGSRC)/$@ $@ + +# No dependency on the ZLIBSRC target so that it only needs +# to be specified once. +$(ZSRCS) $(ZH): + $(RM) $@ + $(COPY) $(ZLIBSRC)/$@ $@ + +# The unconfigured zconf.h varies in name according to the +# zlib release +$(ZCONF): + $(RM) $@ + @for f in zconf.h.in zconf.in.h zconf.h; do\ + test -r $(ZLIBSRC)/$$f &&\ + echo $(COPY) $(ZLIBSRC)/$$f $@ &&\ + $(COPY) $(ZLIBSRC)/$$f $@ && exit 0;\ + done; echo copy: $(ZLIBSRC)/zconf.h not found; exit 1 + +pngm2pnm.c: $(PROGSRC)/png2pnm.c + $(RM) $@ + $(COPY) $(PROGSRC)/png2pnm.c $@ + +# End of makefile for pngm2pnm diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/pngusr.dfa b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/pngusr.dfa new file mode 100644 index 000000000..4f402721a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/pngusr.dfa @@ -0,0 +1,40 @@ +# pngminim/decoder/pngusr.dfa +# +# Copyright (c) 2010-2013 Glenn Randers-Pehrson +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# First all the build options off: + +everything = off + +# All that is required is some read code. This example switches +# on the sequential read code (see ../preader for a progressive +# read example). + +option SEQUENTIAL_READ on + +# You must choose fixed or floating point arithmetic: +# option FLOATING_POINT on + +option FIXED_POINT on + +# You must chose the internal fixed point implementation or to +# use the system floating point. The latter is considerably +# smaller (by about 1kbyte on an x86 system): +# option FLOATING_ARITHMETIC on + +option FLOATING_ARITHMETIC off + +# Your program will probably need other options. The example +# program here, pngm2pnm, requires the following. Take a look +# at pnglibconf.h to find out the full set of what has to be +# enabled to make the following work. + +option SETJMP on +option STDIO on +option READ_EXPAND on +option READ_STRIP_16_TO_8 on +option USER_LIMITS on diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/pngusr.h b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/pngusr.h new file mode 100644 index 000000000..841da0c28 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/decoder/pngusr.h @@ -0,0 +1,24 @@ +/* minrdpngconf.h: headers to make a minimal png-read-only library + * + * Copyright (c) 2007, 2010-2013 Glenn Randers-Pehrson + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Derived from pngcrush.h, Copyright 1998-2007, Glenn Randers-Pehrson + */ + +#ifndef MINRDPNGCONF_H +#define MINRDPNGCONF_H + +/* To include pngusr.h set -DPNG_USER_CONFIG in CPPFLAGS */ + +/* List options to turn off features of the build that do not + * affect the API (so are not recorded in pnglibconf.h) + */ + +#define PNG_NO_WARNINGS +#define PNG_ALIGN_TYPE PNG_ALIGN_NONE + +#endif /* MINRDPNGCONF_H */ diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/README b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/README new file mode 100644 index 000000000..d8d9a6466 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/README @@ -0,0 +1,10 @@ +This demonstrates the use of PNG_USER_CONFIG and pngusr.h + +The makefile builds a minimal write-only encoder with embedded libpng +and zlib. + +Specify the location of the zlib source (1.2.1 or later) as ZLIBSRC +on the make command line. + +If you prefer to use the shared libraries, go to contrib/pngminus +and build the pnm2png application there. diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/makefile b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/makefile new file mode 100644 index 000000000..810b8c8fa --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/makefile @@ -0,0 +1,149 @@ +# Makefile for PngMinus (pnm2pngm) +# Linux / Unix + +#CC=cc +CC=gcc +LD=$(CC) + +# If awk fails try +# make AWK=nawk + +# If cpp fails try +# make CPP=/lib/cpp + +RM=rm -f +COPY=cp + +CFLAGS=-DPNG_USER_CONFIG -DZ_SOLO -DNO_GZIP -I. -O1 + +C=.c +O=.o +L=.a +E= + +# Where to find the source code: +PNGSRC =../../.. +ZLIBSRC=$(PNGSRC)/../zlib +PROGSRC=$(PNGSRC)/contrib/pngminus + +# Zlib +ZSRCS = adler32$(C) compress$(C) crc32$(C) deflate$(C) \ + trees$(C) zutil$(C) + +# Standard headers +#ZH = zlib.h crc32.h deflate.h trees.h zutil.h +ZH = zlib.h crc32.h deflate.h trees.h zutil.h + +# Machine generated headers +ZCONF = zconf.h + +# Headers callers use +ZINC = zlib.h $(ZCONF) + +# Headers the Zlib source uses +ZHDRS = $(ZH) $(ZCONF) + +# compress is not required; it is needed to link the zlib +# code because deflate defines an unused API function deflateBound +# which itself calls compressBound from compress. +ZOBJS = adler32$(O) compress$(O) crc32$(O) deflate$(O) \ + trees$(O) zutil$(O) + +# libpng +PNGSRCS=png$(C) pngerror$(C) pngget$(C) pngmem$(C) \ + pngset$(C) pngtrans$(C) pngwio$(C) pngwrite$(C) \ + pngwtran$(C) pngwutil$(C) + +# Standard headers +PNGH =png.h pngconf.h pngdebug.h pnginfo.h pngpriv.h pngstruct.h + +# Machine generated headers +PNGCONF=pnglibconf.h + +# Headers callers use +PNGINC= png.h pngconf.h pngusr.h $(PNGCONF) + +# Headers the PNG library uses +PNGHDRS=$(PNGH) $(PNGCONF) pngusr.h + +PNGOBJS=png$(O) pngerror$(O) pngget$(O) pngmem$(O) \ + pngset$(O) pngtrans$(O) pngwio$(O) pngwrite$(O) \ + pngwtran$(O) pngwutil$(O) + +PROGSRCS= pnm2pngm$(C) +PROGHDRS= +PROGDOCS= +PROGOBJS= pnm2pngm$(O) + +OBJS = $(PROGOBJS) $(PNGOBJS) $(ZOBJS) + +# implicit make rules ------------------------------------------------------- + +.c$(O): + $(CC) -c $(CFLAGS) $< + +# dependencies + +all: pnm2pngm$(E) + +pnm2pngm$(E): $(OBJS) + $(LD) -o pnm2pngm$(E) $(OBJS) + +# The DFA_XTRA setting turns all libpng options off then +# turns on those required for this minimal build. +# The CPP_FLAGS setting causes pngusr.h to be included in +# both the build of pnglibconf.h and, subsequently, when +# building libpng itself. +$(PNGCONF): $(PNGSRC)/scripts/pnglibconf.mak\ + $(PNGSRC)/scripts/pnglibconf.dfa \ + $(PNGSRC)/scripts/options.awk pngusr.h pngusr.dfa + $(RM) pnglibconf.h pnglibconf.dfn + $(MAKE) $(MAKEFLAGS) -f $(PNGSRC)/scripts/pnglibconf.mak\ + srcdir=$(PNGSRC) CPPFLAGS="-DPNG_USER_CONFIG"\ + DFA_XTRA="pngusr.dfa" $@ + +clean: + $(MAKE) $(MAKEFLAGS) -f $(PNGSRC)/scripts/pnglibconf.mak\ + srcdir=$(PNGSRC) clean + $(RM) pnm2pngm$(O) + $(RM) pnm2pngm$(E) + $(RM) $(OBJS) + +# distclean also removes the copied source and headers +distclean: clean + $(RM) -r scripts # historical reasons + $(RM) $(PNGSRCS) $(PNGH) + $(RM) $(ZSRCS) $(ZH) $(ZCONF) + $(RM) $(PROGSRCS) $(PROGHDRS) $(PROGDOCS) + +# Header file dependencies: +$(PROGOBJS): $(PROGHDRS) $(PNGINC) $(ZINC) +$(PNGOBJS): $(PNGHDRS) $(ZINC) +$(ZOBJS): $(ZHDRS) + +# Gather the source code from the respective directories +$(PNGSRCS) $(PNGH): $(PNGSRC)/$@ + $(RM) $@ + $(COPY) $(PNGSRC)/$@ $@ + +# No dependency on the ZLIBSRC target so that it only needs +# to be specified once. +$(ZSRCS) $(ZH): + $(RM) $@ + $(COPY) $(ZLIBSRC)/$@ $@ + +# The unconfigured zconf.h varies in name according to the +# zlib release +$(ZCONF): + $(RM) $@ + @for f in zconf.h.in zconf.in.h zconf.h; do\ + test -r $(ZLIBSRC)/$$f &&\ + echo $(COPY) $(ZLIBSRC)/$$f $@ &&\ + $(COPY) $(ZLIBSRC)/$$f $@ && exit 0;\ + done; echo copy: $(ZLIBSRC)/zconf.h not found; exit 1 + +pnm2pngm.c: $(PROGSRC)/pnm2png.c + $(RM) $@ + $(COPY) $(PROGSRC)/pnm2png.c $@ + +# End of makefile for pnm2pngm diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/pngusr.dfa b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/pngusr.dfa new file mode 100644 index 000000000..88d8b2a07 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/pngusr.dfa @@ -0,0 +1,35 @@ +# pngminim/encoder/pngusr.dfa +# +# Copyright (c) 2010-2013 Glenn Randers-Pehrson +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# First all the build options off: + +everything = off + +# Switch on the write code - this makes a minimalist encoder + +option WRITE on + +# You must choose fixed or floating point arithmetic: +# option FLOATING_POINT on + +option FIXED_POINT on + +# You must chose the internal fixed point implementation or to +# use the system floating point. The latter is considerably +# smaller (by about 1kbyte on an x86 system): +# option FLOATING_ARITHMETIC on + +option FLOATING_ARITHMETIC off + +# Your program will probably need other options. The example +# program here, pnm2pngm, requires the following. Take a look +# at pnglibconf.h to find out the full set of what has to be +# enabled to make the following work. + +option SETJMP on +option STDIO on diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/pngusr.h b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/pngusr.h new file mode 100644 index 000000000..a050ef3eb --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/encoder/pngusr.h @@ -0,0 +1,24 @@ +/* minwrpngconf.h: headers to make a minimal png-write-only library + * + * Copyright (c) 2007, 2010-2013 Glenn Randers-Pehrson + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Derived from pngcrush.h, Copyright 1998-2007, Glenn Randers-Pehrson + */ + +#ifndef MINWRPNGCONF_H +#define MINWRPNGCONF_H + +/* To include pngusr.h set -DPNG_USER_CONFIG in CPPFLAGS */ + +/* List options to turn off features of the build that do not + * affect the API (so are not recorded in pnglibconf.h) + */ + +#define PNG_NO_WARNINGS +#define PNG_ALIGN_TYPE PNG_ALIGN_NONE + +#endif /* MINWRPNGCONF_H */ diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/README b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/README new file mode 100644 index 000000000..faa83560a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/README @@ -0,0 +1,15 @@ +This demonstrates the use of PNG_USER_CONFIG and pngusr.h + +The makefile builds a minimal read-only progressive decoder with +embedded libpng, zlib and your system's X library. + +Specify the location of the zlib source (1.2.1 or later) as ZLIBSRC +on the make command line. + +Edit makefile if required, to find your X library and include files, +then + + make ZLIBSRC=directory + +If you prefer to use the shared libraries, go to contrib/gregbook +and build the rpng2-x application there. diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/makefile b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/makefile new file mode 100644 index 000000000..ecc05c7bf --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/makefile @@ -0,0 +1,165 @@ +# Makefile for PngMinus (rpng2) +# Linux / Unix + +#CC=cc +CC=gcc +LD=$(CC) + +# If awk fails try +# make AWK=nawk + +# If cpp fails try +# make CPP=/lib/cpp + +RM=rm -f +COPY=cp + +#XINC = -I/usr/include # old-style, stock X distributions +#XLIB = -L/usr/lib/X11 -lX11 # (including SGI IRIX) + +#XINC = -I/usr/openwin/include # Sun workstations (OpenWindows) +#XLIB = -L/usr/openwin/lib -lX11 + +XINC = -I/usr/X11R6/include # new X distributions (X.org, etc.) +XLIB = -L/usr/X11R6/lib -lX11 +#XLIB = -L/usr/X11R6/lib64 -lX11 # e.g., Red Hat on AMD64 + +#XINC = -I/usr/local/include # FreeBSD +#XLIB = -L/usr/local/lib -lX11 + +#LIBS = $(XLIB) +LIBS = $(XLIB) -lm #platforms that need libm + +CFLAGS=-DPNG_USER_CONFIG -DNO_GZCOMPRESS -DZ_SOLO -DNO_GZIP -I. $(XINC) -O1 + +C=.c +O=.o +L=.a +E= + +# Where to find the source code: +PNGSRC =../../.. +ZLIBSRC=$(PNGSRC)/../zlib +PROGSRC=$(PNGSRC)/contrib/gregbook + +# Zlib (minimal inflate requirements - crc32 is used by libpng) +# zutil can be eliminated if you provide your own zcalloc and zcfree +ZSRCS = adler32$(C) crc32$(C) \ + inffast$(C) inflate$(C) inftrees$(C) \ + zutil$(C) + +# Standard headers +ZH = zlib.h crc32.h inffast.h inffixed.h \ + inflate.h inftrees.h zutil.h + +# Machine generated headers +ZCONF = zconf.h + +# Headers callers use +ZINC = zlib.h $(ZCONF) + +# Headers the Zlib source uses +ZHDRS = $(ZH) $(ZCONF) + +ZOBJS = adler32$(O) crc32$(O) \ + inffast$(O) inflate$(O) inftrees$(O) \ + zutil$(O) + +# libpng +PNGSRCS=png$(C) pngerror$(C) pngget$(C) pngmem$(C) \ + pngpread$(C) pngread$(C) pngrio$(C) pngrtran$(C) pngrutil$(C) \ + pngset$(C) pngtrans$(C) + +# Standard headers +PNGH =png.h pngconf.h pngdebug.h pnginfo.h pngpriv.h pngstruct.h + +# Machine generated headers +PNGCONF=pnglibconf.h + +# Headers callers use +PNGINC= png.h pngconf.h pngusr.h $(PNGCONF) + +# Headers the PNG library uses +PNGHDRS=$(PNGH) $(PNGCONF) pngusr.h + +PNGOBJS=png$(O) pngerror$(O) pngget$(O) pngmem$(O) \ + pngpread$(O) pngread$(O) pngrio$(O) pngrtran$(O) pngrutil$(O) \ + pngset$(O) pngtrans$(O) + +PROGSRCS= rpng2-x$(C) readpng2$(C) +PROGHDRS= readpng2.h +PROGDOCS= COPYING LICENSE +PROGOBJS= rpng2-x$(O) readpng2$(O) + +OBJS = $(PROGOBJS) $(PNGOBJS) $(ZOBJS) + +# implicit make rules ------------------------------------------------------- + +.c$(O): + $(CC) -c $(CFLAGS) $< + +# dependencies + +all: $(PROGDOCS) rpng2-x$(E) + +rpng2-x$(E): $(OBJS) + $(LD) -o rpng2-x$(E) $(OBJS) $(LIBS) + +# The DFA_XTRA setting turns all libpng options off then +# turns on those required for this minimal build. +# The CPP_FLAGS setting causes pngusr.h to be included in +# both the build of pnglibconf.h and, subsequently, when +# building libpng itself. +$(PNGCONF): $(PNGSRC)/scripts/pnglibconf.mak\ + $(PNGSRC)/scripts/pnglibconf.dfa \ + $(PNGSRC)/scripts/options.awk pngusr.h pngusr.dfa + $(RM) pnglibconf.h pnglibconf.dfn + $(MAKE) $(MAKEFLAGS) -f $(PNGSRC)/scripts/pnglibconf.mak\ + srcdir=$(PNGSRC) CPPFLAGS="-DPNG_USER_CONFIG"\ + DFA_XTRA="pngusr.dfa" $@ + +clean: + $(MAKE) $(MAKEFLAGS) -f $(PNGSRC)/scripts/pnglibconf.mak\ + srcdir=$(PNGSRC) clean + $(RM) rpng2-x$(O) + $(RM) rpng2-x$(E) + $(RM) $(OBJS) + +# distclean also removes the copied source and headers +distclean: clean + $(RM) -r scripts # historical reasons + $(RM) $(PNGSRCS) $(PNGH) + $(RM) $(ZSRCS) $(ZH) $(ZCONF) + $(RM) $(PROGSRCS) $(PROGHDRS) $(PROGDOCS) + +# Header file dependencies: +$(PROGOBJS): $(PROGHDRS) $(PNGINC) $(ZINC) +$(PNGOBJS): $(PNGHDRS) $(ZINC) +$(ZOBJS): $(ZHDRS) + +# Gather the source code from the respective directories +$(PNGSRCS) $(PNGH): $(PNGSRC)/$@ + $(RM) $@ + $(COPY) $(PNGSRC)/$@ $@ + +# No dependency on the ZLIBSRC target so that it only needs +# to be specified once. +$(ZSRCS) $(ZH): + $(RM) $@ + $(COPY) $(ZLIBSRC)/$@ $@ + +# The unconfigured zconf.h varies in name according to the +# zlib release +$(ZCONF): + $(RM) $@ + @for f in zconf.h.in zconf.in.h zconf.h; do\ + test -r $(ZLIBSRC)/$$f &&\ + echo $(COPY) $(ZLIBSRC)/$$f $@ &&\ + $(COPY) $(ZLIBSRC)/$$f $@ && exit 0;\ + done; echo copy: $(ZLIBSRC)/zconf.h not found; exit 1 + +$(PROGSRCS) $(PROGHDRS) $(PROGDOCS): $(PROGSRC)/$@ + $(RM) $@ + $(COPY) $(PROGSRC)/$@ $@ + +# End of makefile for rpng2-x diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/pngusr.dfa b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/pngusr.dfa new file mode 100644 index 000000000..ac297f41b --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/pngusr.dfa @@ -0,0 +1,40 @@ +# pngminim/preader/pngusr.dfa +# +# Copyright (c) 2010-2013 Glenn Randers-Pehrson +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# First all the build options off: + +everything = off + +# Just switch on the progressive read code + +option PROGRESSIVE_READ on + +# You may choose fixed or floating point APIs: +# option FLOATING_POINT on + +option FIXED_POINT on + +# You must chose the internal fixed point implementation or to +# use the system floating point. The latter is considerably +# smaller (by about 1kbyte on an x86 system): + +option FLOATING_ARITHMETIC on +# option FLOATING_ARITHMETIC off + +# Your program will probably need other options. The example +# program here, rpng2-x, requires the following. Take a look +# at pnglibconf.h to find out the full set of what has to be +# enabled to make the following work. + +option SETJMP on +option STDIO on +option READ_bKGD on +option READ_GAMMA on +option READ_EXPAND on +option READ_STRIP_16_TO_8 on +option READ_GRAY_TO_RGB on diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/pngusr.h b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/pngusr.h new file mode 100644 index 000000000..d84863472 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminim/preader/pngusr.h @@ -0,0 +1,24 @@ +/* minrdpngconf.h: headers to make a minimal png-read-only library + * + * Copyright (c) 2009, 2010-2013 Glenn Randers-Pehrson + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Derived from pngcrush.h, Copyright 1998-2007, Glenn Randers-Pehrson + */ + +#ifndef MINPRDPNGCONF_H +#define MINPRDPNGCONF_H + +/* To include pngusr.h set -DPNG_USER_CONFIG in CPPFLAGS */ + +/* List options to turn off features of the build that do not + * affect the API (so are not recorded in pnglibconf.h) + */ + +#define PNG_NO_WARNINGS +#define PNG_ALIGN_TYPE PNG_ALIGN_NONE + +#endif /* MINPRDPNGCONF_H */ diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/README b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/README new file mode 100644 index 000000000..bbe7407ec --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/README @@ -0,0 +1,153 @@ +PngMinus +-------- +(copyright Willem van Schaik, 1999) + + +License +------- + +Permission to use, copy, modify, and distribute this software and +its documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and +that both that copyright notice and this permission notice appear in +supporting documentation. This software is provided "as is" without +express or implied warranty. + + +Some history +------------ +Soon after the creation of PNG in 1995, the need was felt for a set of +pnmtopng / pngtopnm utilities. Independantly Alexander Lehmann and I +(Willem van Schaik) started such a project. Luckily we discovered this +and merged the two together into pnmtopng.tar.gz, which is available +from a/o ftp://ftp.simplesystems.org/pub/libpng/png/. + +These two utilities have many, many options and make use of most of the +features of PNG, like gamma, alpha, sbit, text-chunks, etc. This makes +the utilities quite complex and by now not anymore very maintainable. +When we wrote these programs, libpng was still in an early stage. +Therefore, lots of the functionality that we put in our software can now +be done using transform-functions in libpng. + +Finally, to compile these programs, you need to have installed and +compiled three libraries: libpng, zlib and netpbm. Especially the latter +makes the whole setup a bit bulky. But that's unavoidable given the many +features of pnmtopng. + + +What now +-------- +At this moment libpng is in a very stable state and can do much of the +work done in pnmtopng. Also, pnmtopng needs to be upgraded to the new +interface of libpng. Hence, it is time for a rewrite from the ground up +of pnmtopng and pngtopnm. This will happen in the near future (stay +tuned). The new package will get a different name to distinguish it from +the old one: PngPlus. + +To experiment a bit with the new interface of libpng, I started off with +a small prototype that contains only the basic functionality. It doesn't +have any of the options to read or write special chunks and it will do +no gamma correction. But this makes it also a simple program that is +quite easy to understand and can serve well as a template for other +software developments. (By now there are of course a couple of programs, +like Greg Roelofs' rpng/wpng, that can be used just as good.) + + +Can and can not +--------------- +As this is the small brother of the future PngPlus, I called this fellow +PngMinus. Because I started this development in good-old Turbo-C, I +avoided the use the netpbm library, which requires DOS extenders. Again, +another reason to call it PngMinus (minus netpbm :-). So, part of the +program are some elementary routines to read / write pgm- and ppm-files. +It does not read b&w pbm-files. + +The downside of this approach is that you can not use them on images +that require blocks of memory bigger than 64k (the DOS version). For +larger images you will get an out-of-memory error. + +As said before, PngMinus doesn't correct for gamma. When reading +png-files you can do this just as well by piping the output of png2pnm +to pnmgamma, one of the standard PbmPlus tools. This same scenario will +most probably also be followed in the full-blown future PngPlus, with +the addition of course of the possibility to create gamma-chunks when +writing png-files. + +On the other hand it supports alpha-channels. When reading a png-image +you can write the alpha-channel into a pgm-file. And when creating an +RGB+A png-image, you just combine a ppm-file with a corresponding +pgm-file containing the alpha-channel. When reading, transparency chunks +are converted into an alpha-channel and from there on treated the same +way. + +Finally you can opt for writing ascii or binary pgm- and ppm-files. When +the bit-depth is 16, the format will always be ascii. + + +Using it +-------- +To distinguish them from pnmtopng and PngPlus, the utilities are named +png2pnm and pnm2png (2 instead of to). The input- and output-files can +be given as parameters or through redirection. Therefore the programs +can be part of a pipe. + +To list the options type "png2pnm -h" or "pnm2png -h". + + +Just like Scandinavian furniture +-------------------------------- +You have to put it together yourself. I did test the software under +MS-DOS with Turbo-C 3.0 and under RedHat Linux 4.2 with gcc. In both +cases I used libpng-1.0.4 and zlib-1.1.3. Later versions should be OK, +however some older libpng versions have a bug in pngmem.c when using +Turbo-C 3.0 (see below). + +You can build it using one of the two makefiles (make -f makefile.###) +or use the batch/script files pngminus.bat / pngminus.sh. This assumes +that you have built the libraries in ../libpng and ../zlib. Using Linux, +make sure that you have built libpng with makefile.std and not +makefile.linux (also called .lnx in earlier versions of libpng). The +latter creates a .so shared-library, while the PngMinus makefile assumes +a normal .a static library. + +If you create a ../pngsuite directory and then store the basn####.png +files from PngSuite (http://www.schaik.com/pngsuite/) in there, you can +test in one go the proper functioning of PngMinus, see png2pnm.bat and +pnm2png.bat (or the .sh versions). + + +Warranty +------- +Please, remember that this was just a small experiment to learn a few +things. It will have many unforeseen features . Who said bugs? Use +it when you are in need for something simple or when you want to start +developing your own stuff. + + +The Turbo bug +------------- +** pngmem.old + hptr = (png_byte huge *)((long)(hptr) & 0xfffffff0L); + hptr += 16L; +** pngmem.c + hptr = (png_byte huge *)((long)(hptr) & 0xfffffff0L); + hptr = hptr + 16L; +** + +** pngmem.old + png_ptr->offset_table_ptr[i] = (png_bytep)hptr; + hptr += (png_uint_32)65536L; +** pngmem.c + png_ptr->offset_table_ptr[i] = (png_bytep)hptr; + hptr = hptr + 65536L; +** + + +The end +------- +Willem van Schaik +mailto:willem@schaik.com +http://www.schaik.com/png/ +------- +Oct 1999 + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/makefile.std b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/makefile.std new file mode 100644 index 000000000..30317b77d --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/makefile.std @@ -0,0 +1,65 @@ +# Makefile for PngMinus (png2pnm and pnm2png) +# Linux / Unix + +#CC=cc +CC=gcc +LD=$(CC) + +RM=rm -f + +#PNGPATH = /usr/local +#PNGINC = -I$(PNGPATH)/include/libpng16 +#PNGLIB = -L$(PNGPATH)/lib -lpng16 +#PNGLIBS = $(PNGPATH)/lib/libpng16.a +PNGINC = -I../.. +PNGLIB = -L../.. -lpng +PNGLIBS = ../../libpng.a + +#ZPATH = /usr/local +#ZINC = -I$(ZPATH)/include +#ZLIB = -L$(ZPATH)/lib -lz +#ZLIBS = $(ZPATH)/lib/libz.a +ZINC = -I../../../zlib +ZLIB = -L../../../zlib -lz +ZLIBS = ../../../zlib/libz.a + +CFLAGS=$(PNGINC) $(ZINC) +LDLIBS=$(PNGLIB) $(ZLIB) +LDLIBSS=$(PNGLIBS) $(ZLIBS) +C=.c +O=.o +L=.a +E= + +# dependencies + +#all: png2pnm$(E) pnm2png$(E) +all: png2pnm$(E) pnm2png$(E) png2pnm-static$(E) pnm2png-static$(E) + +png2pnm$(O): png2pnm$(C) + $(CC) -c $(CFLAGS) png2pnm$(C) + +png2pnm$(E): png2pnm$(O) + $(LD) $(LDFLAGS) -o png2pnm$(E) png2pnm$(O) $(LDLIBS) -lm + +png2pnm-static$(E): png2pnm$(O) + $(LD) $(LDFLAGS) -o png2pnm-static$(E) png2pnm$(O) $(LDLIBSS) -lm + +pnm2png$(O): pnm2png$(C) + $(CC) -c $(CFLAGS) pnm2png$(C) + +pnm2png$(E): pnm2png$(O) + $(LD) $(LDFLAGS) -o pnm2png$(E) pnm2png$(O) $(LDLIBS) -lm + +pnm2png-static$(E): pnm2png$(O) + $(LD) $(LDFLAGS) -o pnm2png-static$(E) pnm2png$(O) $(LDLIBSS) -lm + +clean: + $(RM) png2pnm$(O) + $(RM) pnm2png$(O) + $(RM) png2pnm$(E) + $(RM) pnm2png$(E) + $(RM) png2pnm-static$(E) + $(RM) pnm2png-static$(E) + +# End of makefile for png2pnm / pnm2png diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/makefile.tc3 b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/makefile.tc3 new file mode 100644 index 000000000..404f18d5b --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/makefile.tc3 @@ -0,0 +1,38 @@ +# Makefile for PngMinus (png2pnm and pnm2png) +# TurboC++ 3.0 + +CC=tcc -Ic:\tc3\inc +LD=tcc -Lc:\tc3\lib +LB=tlib +RM=del +CP=copy +MODEL=l +CCFLAGS=-O -m$(MODEL) -I..\libpng -I..\zlib +LDFLAGS=-m$(MODEL) -L..\libpng -L..\zlib +C=.c +O=.obj +L=.lib +E=.exe + +# dependencies + +all: png2pnm$(E) pnm2png$(E) + +png2pnm$(O): png2pnm$(C) + $(CC) -c $(CCFLAGS) png2pnm$(C) + +png2pnm$(E): png2pnm$(O) + $(LD) $(LDFLAGS) png2pnm$(O) libpng$(L) zlib$(L) + +pnm2png$(O): pnm2png$(C) + $(CC) -c $(CCFLAGS) pnm2png$(C) + +pnm2png$(E): pnm2png$(O) + $(LD) $(LDFLAGS) pnm2png$(O) libpng$(L) zlib$(L) + +clean: + $(RM) *$(O) + $(RM) *$(E) + +# End of makefile for png2pnm / pnm2png + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/makevms.com b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/makevms.com new file mode 100644 index 000000000..00561bcd0 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/makevms.com @@ -0,0 +1,92 @@ +$!------------------------------------------------------------------------------ +$! make Contrib programs of libpng under OpenVMS +$! +$! +$! Look for the compiler used +$! +$ zlibsrc = "[---.zlib]" +$ ccopt="/include=(''zlibsrc',[--])" +$ if f$getsyi("HW_MODEL").ge.1024 +$ then +$ ccopt = "/prefix=all"+ccopt +$ comp = "__decc__=1" +$ if f$trnlnm("SYS").eqs."" then define sys sys$library: +$ else +$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs."" +$ then +$ if f$trnlnm("SYS").eqs."" then define sys sys$library: +$ if f$search("SYS$SYSTEM:VAXC.EXE").eqs."" +$ then +$ comp = "__gcc__=1" +$ CC :== GCC +$ else +$ comp = "__vaxc__=1" +$ endif +$ else +$ if f$trnlnm("SYS").eqs."" then define sys decc$library_include: +$ ccopt = "/decc/prefix=all"+ccopt +$ comp = "__decc__=1" +$ endif +$ endif +$ open/write lopt lib.opt +$ write lopt "[--]libpng.olb/lib" +$ write lopt "''zlibsrc'libz.olb/lib" +$ close lopt +$ open/write xopt x11.opt +$ write xopt "sys$library:decw$xlibshr.exe/share" +$ close xopt +$ write sys$output "Compiling PNG contrib programs ..." +$ write sys$output "Building pnm2png..." +$ CALL MAKE pnm2png.OBJ "cc ''CCOPT' pnm2png" - + pnm2png.c +$ call make pnm2png.exe - + "LINK pnm2png,lib.opt/opt" - + pnm2png.obj +$ write sys$output "Building png2pnm..." +$ CALL MAKE png2pnm.OBJ "cc ''CCOPT' png2pnm" - + png2pnm.c +$ call make png2pnm.exe - + "LINK png2pnm,lib.opt/opt" - + png2pnm.obj +$ exit +$! +$! +$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES +$ V = 'F$Verify(0) +$! P1 = What we are trying to make +$! P2 = Command to make it +$! P3 - P8 What it depends on +$ +$ If F$Search(P1) .Eqs. "" Then Goto Makeit +$ Time = F$CvTime(F$File(P1,"RDT")) +$arg=3 +$Loop: +$ Argument = P'arg +$ If Argument .Eqs. "" Then Goto Exit +$ El=0 +$Loop2: +$ File = F$Element(El," ",Argument) +$ If File .Eqs. " " Then Goto Endl +$ AFile = "" +$Loop3: +$ OFile = AFile +$ AFile = F$Search(File) +$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl +$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit +$ Goto Loop3 +$NextEL: +$ El = El + 1 +$ Goto Loop2 +$EndL: +$ arg=arg+1 +$ If arg .Le. 8 Then Goto Loop +$ Goto Exit +$ +$Makeit: +$ VV=F$VERIFY(0) +$ write sys$output P2 +$ 'P2 +$ VV='F$Verify(VV) +$Exit: +$ If V Then Set Verify +$ENDSUBROUTINE diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.bat b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.bat new file mode 100644 index 000000000..449cf3675 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.bat @@ -0,0 +1,41 @@ +REM -- grayscale +png2pnm.exe -noraw ..\pngsuite\basn0g01.png basn0g01.pgm +png2pnm.exe -noraw ..\pngsuite\basn0g02.png basn0g02.pgm +png2pnm.exe -noraw ..\pngsuite\basn0g04.png basn0g04.pgm +png2pnm.exe -noraw ..\pngsuite\basn0g08.png basn0g08.pgm +png2pnm.exe -noraw ..\pngsuite\basn0g16.png basn0g16.pgm +REM -- full-color +png2pnm.exe -noraw ..\pngsuite\basn2c08.png basn2c08.ppm +png2pnm.exe -noraw ..\pngsuite\basn2c16.png basn2c16.ppm +REM -- palletted +png2pnm.exe -noraw ..\pngsuite\basn3p01.png basn3p01.ppm +png2pnm.exe -noraw ..\pngsuite\basn3p02.png basn3p02.ppm +png2pnm.exe -noraw ..\pngsuite\basn3p04.png basn3p04.ppm +png2pnm.exe -noraw ..\pngsuite\basn3p08.png basn3p08.ppm +REM -- gray with alpha-channel +png2pnm.exe -noraw ..\pngsuite\basn4a08.png basn4a08.pgm +png2pnm.exe -noraw ..\pngsuite\basn4a16.png basn4a16.pgm +REM -- color with alpha-channel +png2pnm.exe -noraw -alpha basn6a08.pgm ..\pngsuite\basn6a08.png basn6a08.ppm +png2pnm.exe -noraw -alpha basn6a16.pgm ..\pngsuite\basn6a16.png basn6a16.ppm +REM -- grayscale +png2pnm.exe -raw ..\pngsuite\basn0g01.png rawn0g01.pgm +png2pnm.exe -raw ..\pngsuite\basn0g02.png rawn0g02.pgm +png2pnm.exe -raw ..\pngsuite\basn0g04.png rawn0g04.pgm +png2pnm.exe -raw ..\pngsuite\basn0g08.png rawn0g08.pgm +png2pnm.exe -raw ..\pngsuite\basn0g16.png rawn0g16.pgm +REM -- full-color +png2pnm.exe -raw ..\pngsuite\basn2c08.png rawn2c08.ppm +png2pnm.exe -raw ..\pngsuite\basn2c16.png rawn2c16.ppm +REM -- palletted +png2pnm.exe -raw ..\pngsuite\basn3p01.png rawn3p01.ppm +png2pnm.exe -raw ..\pngsuite\basn3p02.png rawn3p02.ppm +png2pnm.exe -raw ..\pngsuite\basn3p04.png rawn3p04.ppm +png2pnm.exe -raw ..\pngsuite\basn3p08.png rawn3p08.ppm +REM -- gray with alpha-channel +png2pnm.exe -raw ..\pngsuite\basn4a08.png rawn4a08.pgm +png2pnm.exe -raw ..\pngsuite\basn4a16.png rawn4a16.pgm +REM -- color with alpha-channel +png2pnm.exe -noraw -alpha rawn6a08.pgm ..\pngsuite\basn6a08.png rawn6a08.ppm +png2pnm.exe -noraw -alpha rawn6a16.pgm ..\pngsuite\basn6a16.png rawn6a16.ppm + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.c b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.c new file mode 100644 index 000000000..aa9513ddc --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.c @@ -0,0 +1,431 @@ +/* + * png2pnm.c --- conversion from PNG-file to PGM/PPM-file + * copyright (C) 1999 by Willem van Schaik + * + * version 1.0 - 1999.10.15 - First version. + * + * Permission to use, copy, modify, and distribute this software and + * its documentation for any purpose and without fee is hereby granted, + * provided that the above copyright notice appear in all copies and + * that both that copyright notice and this permission notice appear in + * supporting documentation. This software is provided "as is" without + * express or implied warranty. + */ + +#include +#include +#ifdef __TURBOC__ +#include +#include +#endif +#include + +#ifndef BOOL +#define BOOL unsigned char +#endif +#ifndef TRUE +#define TRUE (BOOL) 1 +#endif +#ifndef FALSE +#define FALSE (BOOL) 0 +#endif + +#ifdef __TURBOC__ +#define STDIN 0 +#define STDOUT 1 +#define STDERR 2 +#endif + +/* to make png2pnm verbose so we can find problems (needs to be before png.h) */ +#ifndef PNG_DEBUG +#define PNG_DEBUG 0 +#endif + +#include "png.h" + +/* Define png_jmpbuf() in case we are using a pre-1.0.6 version of libpng */ +#ifndef png_jmpbuf +# define png_jmpbuf(png_ptr) ((png_ptr)->jmpbuf) +#endif + +/* function prototypes */ + +int main (int argc, char *argv[]); +void usage (); +BOOL png2pnm (FILE *png_file, FILE *pnm_file, FILE *alpha_file, BOOL raw, BOOL alpha); + +/* + * main + */ + +int main(int argc, char *argv[]) +{ + FILE *fp_rd = stdin; + FILE *fp_wr = stdout; + FILE *fp_al = NULL; + BOOL raw = TRUE; + BOOL alpha = FALSE; + int argi; + + for (argi = 1; argi < argc; argi++) + { + if (argv[argi][0] == '-') + { + switch (argv[argi][1]) + { + case 'n': + raw = FALSE; + break; + case 'r': + raw = TRUE; + break; + case 'a': + alpha = TRUE; + argi++; + if ((fp_al = fopen (argv[argi], "wb")) == NULL) + { + fprintf (stderr, "PNM2PNG\n"); + fprintf (stderr, "Error: can not create alpha-channel file %s\n", argv[argi]); + exit (1); + } + break; + case 'h': + case '?': + usage(); + exit(0); + break; + default: + fprintf (stderr, "PNG2PNM\n"); + fprintf (stderr, "Error: unknown option %s\n", argv[argi]); + usage(); + exit(1); + break; + } /* end switch */ + } + else if (fp_rd == stdin) + { + if ((fp_rd = fopen (argv[argi], "rb")) == NULL) + { + fprintf (stderr, "PNG2PNM\n"); + fprintf (stderr, "Error: file %s does not exist\n", argv[argi]); + exit (1); + } + } + else if (fp_wr == stdout) + { + if ((fp_wr = fopen (argv[argi], "wb")) == NULL) + { + fprintf (stderr, "PNG2PNM\n"); + fprintf (stderr, "Error: can not create file %s\n", argv[argi]); + exit (1); + } + } + else + { + fprintf (stderr, "PNG2PNM\n"); + fprintf (stderr, "Error: too many parameters\n"); + usage(); + exit(1); + } + } /* end for */ + +#ifdef __TURBOC__ + /* set stdin/stdout if required to binary */ + if (fp_rd == stdin) + { + setmode (STDIN, O_BINARY); + } + if ((raw) && (fp_wr == stdout)) + { + setmode (STDOUT, O_BINARY); + } +#endif + + /* call the conversion program itself */ + if (png2pnm (fp_rd, fp_wr, fp_al, raw, alpha) == FALSE) + { + fprintf (stderr, "PNG2PNM\n"); + fprintf (stderr, "Error: unsuccessful conversion of PNG-image\n"); + exit(1); + } + + /* close input file */ + fclose (fp_rd); + /* close output file */ + fclose (fp_wr); + /* close alpha file */ + if (alpha) + fclose (fp_al); + + return 0; +} + +/* + * usage + */ + +void usage() +{ + fprintf (stderr, "PNG2PNM\n"); + fprintf (stderr, " by Willem van Schaik, 1999\n"); +#ifdef __TURBOC__ + fprintf (stderr, " for Turbo-C and Borland-C compilers\n"); +#else + fprintf (stderr, " for Linux (and Unix) compilers\n"); +#endif + fprintf (stderr, "Usage: png2pnm [options] .png [.pnm]\n"); + fprintf (stderr, " or: ... | png2pnm [options]\n"); + fprintf (stderr, "Options:\n"); + fprintf (stderr, " -r[aw] write pnm-file in binary format (P4/P5/P6) (default)\n"); + fprintf (stderr, " -n[oraw] write pnm-file in ascii format (P1/P2/P3)\n"); + fprintf (stderr, " -a[lpha] .pgm write PNG alpha channel as pgm-file\n"); + fprintf (stderr, " -h | -? print this help-information\n"); +} + +/* + * png2pnm + */ + +BOOL png2pnm (FILE *png_file, FILE *pnm_file, FILE *alpha_file, BOOL raw, BOOL alpha) +{ + png_struct *png_ptr = NULL; + png_info *info_ptr = NULL; + png_byte buf[8]; + png_byte *png_pixels = NULL; + png_byte **row_pointers = NULL; + png_byte *pix_ptr = NULL; + png_uint_32 row_bytes; + + png_uint_32 width; + png_uint_32 height; + int bit_depth; + int channels; + int color_type; + int alpha_present; + int row, col; + int ret; + int i; + long dep_16; + + /* read and check signature in PNG file */ + ret = fread (buf, 1, 8, png_file); + if (ret != 8) + return FALSE; + + ret = png_sig_cmp (buf, 0, 8); + if (ret) + return FALSE; + + /* create png and info structures */ + + png_ptr = png_create_read_struct (PNG_LIBPNG_VER_STRING, + NULL, NULL, NULL); + if (!png_ptr) + return FALSE; /* out of memory */ + + info_ptr = png_create_info_struct (png_ptr); + if (!info_ptr) + { + png_destroy_read_struct (&png_ptr, NULL, NULL); + return FALSE; /* out of memory */ + } + + if (setjmp (png_jmpbuf(png_ptr))) + { + png_destroy_read_struct (&png_ptr, &info_ptr, NULL); + return FALSE; + } + + /* set up the input control for C streams */ + png_init_io (png_ptr, png_file); + png_set_sig_bytes (png_ptr, 8); /* we already read the 8 signature bytes */ + + /* read the file information */ + png_read_info (png_ptr, info_ptr); + + /* get size and bit-depth of the PNG-image */ + png_get_IHDR (png_ptr, info_ptr, + &width, &height, &bit_depth, &color_type, + NULL, NULL, NULL); + + /* set-up the transformations */ + + /* transform paletted images into full-color rgb */ + if (color_type == PNG_COLOR_TYPE_PALETTE) + png_set_expand (png_ptr); + /* expand images to bit-depth 8 (only applicable for grayscale images) */ + if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) + png_set_expand (png_ptr); + /* transform transparency maps into full alpha-channel */ + if (png_get_valid (png_ptr, info_ptr, PNG_INFO_tRNS)) + png_set_expand (png_ptr); + +#ifdef NJET + /* downgrade 16-bit images to 8 bit */ + if (bit_depth == 16) + png_set_strip_16 (png_ptr); + /* transform grayscale images into full-color */ + if (color_type == PNG_COLOR_TYPE_GRAY || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_gray_to_rgb (png_ptr); + /* only if file has a file gamma, we do a correction */ + if (png_get_gAMA (png_ptr, info_ptr, &file_gamma)) + png_set_gamma (png_ptr, (double) 2.2, file_gamma); +#endif + + /* all transformations have been registered; now update info_ptr data, + * get rowbytes and channels, and allocate image memory */ + + png_read_update_info (png_ptr, info_ptr); + + /* get the new color-type and bit-depth (after expansion/stripping) */ + png_get_IHDR (png_ptr, info_ptr, &width, &height, &bit_depth, &color_type, + NULL, NULL, NULL); + + /* check for 16-bit files */ + if (bit_depth == 16) + { + raw = FALSE; +#ifdef __TURBOC__ + pnm_file->flags &= ~((unsigned) _F_BIN); +#endif + } + + /* calculate new number of channels and store alpha-presence */ + if (color_type == PNG_COLOR_TYPE_GRAY) + channels = 1; + else if (color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + channels = 2; + else if (color_type == PNG_COLOR_TYPE_RGB) + channels = 3; + else if (color_type == PNG_COLOR_TYPE_RGB_ALPHA) + channels = 4; + else + channels = 0; /* should never happen */ + alpha_present = (channels - 1) % 2; + + /* check if alpha is expected to be present in file */ + if (alpha && !alpha_present) + { + fprintf (stderr, "PNG2PNM\n"); + fprintf (stderr, "Error: PNG-file doesn't contain alpha channel\n"); + exit (1); + } + + /* row_bytes is the width x number of channels x (bit-depth / 8) */ + row_bytes = png_get_rowbytes (png_ptr, info_ptr); + + if ((png_pixels = (png_byte *) malloc (row_bytes * height * sizeof (png_byte))) == NULL) { + png_destroy_read_struct (&png_ptr, &info_ptr, NULL); + return FALSE; + } + + if ((row_pointers = (png_byte **) malloc (height * sizeof (png_bytep))) == NULL) + { + png_destroy_read_struct (&png_ptr, &info_ptr, NULL); + free (png_pixels); + png_pixels = NULL; + return FALSE; + } + + /* set the individual row_pointers to point at the correct offsets */ + for (i = 0; i < (height); i++) + row_pointers[i] = png_pixels + i * row_bytes; + + /* now we can go ahead and just read the whole image */ + png_read_image (png_ptr, row_pointers); + + /* read rest of file, and get additional chunks in info_ptr - REQUIRED */ + png_read_end (png_ptr, info_ptr); + + /* clean up after the read, and free any memory allocated - REQUIRED */ + png_destroy_read_struct (&png_ptr, &info_ptr, (png_infopp) NULL); + + /* write header of PNM file */ + + if ((color_type == PNG_COLOR_TYPE_GRAY) || + (color_type == PNG_COLOR_TYPE_GRAY_ALPHA)) + { + fprintf (pnm_file, "%s\n", (raw) ? "P5" : "P2"); + fprintf (pnm_file, "%d %d\n", (int) width, (int) height); + fprintf (pnm_file, "%ld\n", ((1L << (int) bit_depth) - 1L)); + } + else if ((color_type == PNG_COLOR_TYPE_RGB) || + (color_type == PNG_COLOR_TYPE_RGB_ALPHA)) + { + fprintf (pnm_file, "%s\n", (raw) ? "P6" : "P3"); + fprintf (pnm_file, "%d %d\n", (int) width, (int) height); + fprintf (pnm_file, "%ld\n", ((1L << (int) bit_depth) - 1L)); + } + + /* write header of PGM file with alpha channel */ + + if ((alpha) && + ((color_type == PNG_COLOR_TYPE_GRAY_ALPHA) || + (color_type == PNG_COLOR_TYPE_RGB_ALPHA))) + { + fprintf (alpha_file, "%s\n", (raw) ? "P5" : "P2"); + fprintf (alpha_file, "%d %d\n", (int) width, (int) height); + fprintf (alpha_file, "%ld\n", ((1L << (int) bit_depth) - 1L)); + } + + /* write data to PNM file */ + pix_ptr = png_pixels; + + for (row = 0; row < height; row++) + { + for (col = 0; col < width; col++) + { + for (i = 0; i < (channels - alpha_present); i++) + { + if (raw) + fputc ((int) *pix_ptr++ , pnm_file); + else + if (bit_depth == 16){ + dep_16 = (long) *pix_ptr++; + fprintf (pnm_file, "%ld ", (dep_16 << 8) + ((long) *pix_ptr++)); + } + else + fprintf (pnm_file, "%ld ", (long) *pix_ptr++); + } + if (alpha_present) + { + if (!alpha) + { + pix_ptr++; /* alpha */ + if (bit_depth == 16) + pix_ptr++; + } + else /* output alpha-channel as pgm file */ + { + if (raw) + fputc ((int) *pix_ptr++ , alpha_file); + else + if (bit_depth == 16){ + dep_16 = (long) *pix_ptr++; + fprintf (alpha_file, "%ld ", (dep_16 << 8) + (long) *pix_ptr++); + } + else + fprintf (alpha_file, "%ld ", (long) *pix_ptr++); + } + } /* if alpha_present */ + + if (!raw) + if (col % 4 == 3) + fprintf (pnm_file, "\n"); + } /* end for col */ + + if (!raw) + if (col % 4 != 0) + fprintf (pnm_file, "\n"); + } /* end for row */ + + if (row_pointers != (unsigned char**) NULL) + free (row_pointers); + if (png_pixels != (unsigned char*) NULL) + free (png_pixels); + + return TRUE; + +} /* end of source */ + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.sh b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.sh new file mode 100644 index 000000000..b1c05370d --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/png2pnm.sh @@ -0,0 +1,42 @@ +#!/bin/sh +# -- grayscale +./png2pnm -noraw ../pngsuite/basn0g01.png basn0g01.pgm +./png2pnm -noraw ../pngsuite/basn0g02.png basn0g02.pgm +./png2pnm -noraw ../pngsuite/basn0g04.png basn0g04.pgm +./png2pnm -noraw ../pngsuite/basn0g08.png basn0g08.pgm +./png2pnm -noraw ../pngsuite/basn0g16.png basn0g16.pgm +# -- full-color +./png2pnm -noraw ../pngsuite/basn2c08.png basn2c08.ppm +./png2pnm -noraw ../pngsuite/basn2c16.png basn2c16.ppm +# -- palletted +./png2pnm -noraw ../pngsuite/basn3p01.png basn3p01.ppm +./png2pnm -noraw ../pngsuite/basn3p02.png basn3p02.ppm +./png2pnm -noraw ../pngsuite/basn3p04.png basn3p04.ppm +./png2pnm -noraw ../pngsuite/basn3p08.png basn3p08.ppm +# -- gray with alpha-channel +./png2pnm -noraw ../pngsuite/basn4a08.png basn4a08.pgm +./png2pnm -noraw ../pngsuite/basn4a16.png basn4a16.pgm +# -- color with alpha-channel +./png2pnm -noraw -alpha basn6a08.pgm ../pngsuite/basn6a08.png basn6a08.ppm +./png2pnm -noraw -alpha basn6a16.pgm ../pngsuite/basn6a16.png basn6a16.ppm +# -- grayscale +./png2pnm -raw ../pngsuite/basn0g01.png rawn0g01.pgm +./png2pnm -raw ../pngsuite/basn0g02.png rawn0g02.pgm +./png2pnm -raw ../pngsuite/basn0g04.png rawn0g04.pgm +./png2pnm -raw ../pngsuite/basn0g08.png rawn0g08.pgm +./png2pnm -raw ../pngsuite/basn0g16.png rawn0g16.pgm +# -- full-color +./png2pnm -raw ../pngsuite/basn2c08.png rawn2c08.ppm +./png2pnm -raw ../pngsuite/basn2c16.png rawn2c16.ppm +# -- palletted +./png2pnm -raw ../pngsuite/basn3p01.png rawn3p01.ppm +./png2pnm -raw ../pngsuite/basn3p02.png rawn3p02.ppm +./png2pnm -raw ../pngsuite/basn3p04.png rawn3p04.ppm +./png2pnm -raw ../pngsuite/basn3p08.png rawn3p08.ppm +# -- gray with alpha-channel +./png2pnm -raw ../pngsuite/basn4a08.png rawn4a08.pgm +./png2pnm -raw ../pngsuite/basn4a16.png rawn4a16.pgm +# -- color with alpha-channel +./png2pnm -noraw -alpha rawn6a08.pgm ../pngsuite/basn6a08.png rawn6a08.ppm +./png2pnm -noraw -alpha rawn6a16.pgm ../pngsuite/basn6a16.png rawn6a16.ppm + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pngminus.bat b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pngminus.bat new file mode 100644 index 000000000..911bb8dff --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pngminus.bat @@ -0,0 +1,4 @@ +make -f makefile.tc3 +call png2pnm.bat +call pnm2png.bat + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pngminus.sh b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pngminus.sh new file mode 100644 index 000000000..2a0a9d8fb --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pngminus.sh @@ -0,0 +1,5 @@ +#!/bin/sh +make -f makefile.std +sh png2pnm.sh +sh pnm2png.sh + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.bat b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.bat new file mode 100644 index 000000000..f756cb84d --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.bat @@ -0,0 +1,41 @@ +REM -- grayscale +pnm2png.exe basn0g01.pgm basn0g01.png +pnm2png.exe basn0g02.pgm basn0g02.png +pnm2png.exe basn0g04.pgm basn0g04.png +pnm2png.exe basn0g08.pgm basn0g08.png +pnm2png.exe basn0g16.pgm basn0g16.png +REM -- full-color +pnm2png.exe basn2c08.ppm basn2c08.png +pnm2png.exe basn2c16.ppm basn2c16.png +REM -- palletted +pnm2png.exe basn3p01.ppm basn3p01.png +pnm2png.exe basn3p02.ppm basn3p02.png +pnm2png.exe basn3p04.ppm basn3p04.png +pnm2png.exe basn3p08.ppm basn3p08.png +REM -- gray with alpha-channel +pnm2png.exe -alpha basn6a08.pgm basn4a08.pgm basn4a08.png +pnm2png.exe -alpha basn6a16.pgm basn4a16.pgm basn4a16.png +REM -- color with alpha-channel +pnm2png.exe -alpha basn6a08.pgm basn6a08.ppm basn6a08.png +pnm2png.exe -alpha basn6a16.pgm basn6a16.ppm basn6a16.png +REM -- grayscale +pnm2png.exe rawn0g01.pgm rawn0g01.png +pnm2png.exe rawn0g02.pgm rawn0g02.png +pnm2png.exe rawn0g04.pgm rawn0g04.png +pnm2png.exe rawn0g08.pgm rawn0g08.png +pnm2png.exe rawn0g16.pgm rawn0g16.png +REM -- full-color +pnm2png.exe rawn2c08.ppm rawn2c08.png +pnm2png.exe rawn2c16.ppm rawn2c16.png +REM -- palletted +pnm2png.exe rawn3p01.ppm rawn3p01.png +pnm2png.exe rawn3p02.ppm rawn3p02.png +pnm2png.exe rawn3p04.ppm rawn3p04.png +pnm2png.exe rawn3p08.ppm rawn3p08.png +REM -- gray with alpha-channel +pnm2png.exe -alpha rawn6a08.pgm rawn4a08.pgm rawn4a08.png +pnm2png.exe -alpha rawn6a16.pgm rawn4a16.pgm rawn4a16.png +REM -- color with alpha-channel +pnm2png.exe -alpha rawn6a08.pgm rawn6a08.ppm rawn6a08.png +pnm2png.exe -alpha rawn6a16.pgm rawn6a16.ppm rawn6a16.png + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.c b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.c new file mode 100644 index 000000000..d098e33cb --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.c @@ -0,0 +1,549 @@ +/* + * pnm2png.c --- conversion from PBM/PGM/PPM-file to PNG-file + * copyright (C) 1999 by Willem van Schaik + * + * version 1.0 - 1999.10.15 - First version. + * + * Permission to use, copy, modify, and distribute this software and + * its documentation for any purpose and without fee is hereby granted, + * provided that the above copyright notice appear in all copies and + * that both that copyright notice and this permission notice appear in + * supporting documentation. This software is provided "as is" without + * express or implied warranty. + */ + +#include +#include +#ifdef __TURBOC__ +#include +#include +#endif +#include + +#ifndef BOOL +#define BOOL unsigned char +#endif +#ifndef TRUE +#define TRUE (BOOL) 1 +#endif +#ifndef FALSE +#define FALSE (BOOL) 0 +#endif + +#define STDIN 0 +#define STDOUT 1 +#define STDERR 2 + +/* to make pnm2png verbose so we can find problems (needs to be before png.h) */ +#ifndef PNG_DEBUG +#define PNG_DEBUG 0 +#endif + +#include "png.h" + +/* Define png_jmpbuf() in case we are using a pre-1.0.6 version of libpng */ +#ifndef png_jmpbuf +# define png_jmpbuf(png_ptr) ((png_ptr)->jmpbuf) +#endif + +/* function prototypes */ + +int main (int argc, char *argv[]); +void usage (); +BOOL pnm2png (FILE *pnm_file, FILE *png_file, FILE *alpha_file, BOOL interlace, BOOL alpha); +void get_token(FILE *pnm_file, char *token); +png_uint_32 get_data (FILE *pnm_file, int depth); +png_uint_32 get_value (FILE *pnm_file, int depth); + +/* + * main + */ + +int main(int argc, char *argv[]) +{ + FILE *fp_rd = stdin; + FILE *fp_al = NULL; + FILE *fp_wr = stdout; + BOOL interlace = FALSE; + BOOL alpha = FALSE; + int argi; + + for (argi = 1; argi < argc; argi++) + { + if (argv[argi][0] == '-') + { + switch (argv[argi][1]) + { + case 'i': + interlace = TRUE; + break; + case 'a': + alpha = TRUE; + argi++; + if ((fp_al = fopen (argv[argi], "rb")) == NULL) + { + fprintf (stderr, "PNM2PNG\n"); + fprintf (stderr, "Error: alpha-channel file %s does not exist\n", + argv[argi]); + exit (1); + } + break; + case 'h': + case '?': + usage(); + exit(0); + break; + default: + fprintf (stderr, "PNM2PNG\n"); + fprintf (stderr, "Error: unknown option %s\n", argv[argi]); + usage(); + exit(1); + break; + } /* end switch */ + } + else if (fp_rd == stdin) + { + if ((fp_rd = fopen (argv[argi], "rb")) == NULL) + { + fprintf (stderr, "PNM2PNG\n"); + fprintf (stderr, "Error: file %s does not exist\n", argv[argi]); + exit (1); + } + } + else if (fp_wr == stdout) + { + if ((fp_wr = fopen (argv[argi], "wb")) == NULL) + { + fprintf (stderr, "PNM2PNG\n"); + fprintf (stderr, "Error: can not create PNG-file %s\n", argv[argi]); + exit (1); + } + } + else + { + fprintf (stderr, "PNM2PNG\n"); + fprintf (stderr, "Error: too many parameters\n"); + usage(); + exit (1); + } + } /* end for */ + +#ifdef __TURBOC__ + /* set stdin/stdout to binary, we're reading the PNM always! in binary format */ + if (fp_rd == stdin) + { + setmode (STDIN, O_BINARY); + } + if (fp_wr == stdout) + { + setmode (STDOUT, O_BINARY); + } +#endif + + /* call the conversion program itself */ + if (pnm2png (fp_rd, fp_wr, fp_al, interlace, alpha) == FALSE) + { + fprintf (stderr, "PNM2PNG\n"); + fprintf (stderr, "Error: unsuccessful converting to PNG-image\n"); + exit (1); + } + + /* close input file */ + fclose (fp_rd); + /* close output file */ + fclose (fp_wr); + /* close alpha file */ + if (alpha) + fclose (fp_al); + + return 0; +} + +/* + * usage + */ + +void usage() +{ + fprintf (stderr, "PNM2PNG\n"); + fprintf (stderr, " by Willem van Schaik, 1999\n"); +#ifdef __TURBOC__ + fprintf (stderr, " for Turbo-C and Borland-C compilers\n"); +#else + fprintf (stderr, " for Linux (and Unix) compilers\n"); +#endif + fprintf (stderr, "Usage: pnm2png [options] . [.png]\n"); + fprintf (stderr, " or: ... | pnm2png [options]\n"); + fprintf (stderr, "Options:\n"); + fprintf (stderr, " -i[nterlace] write png-file with interlacing on\n"); + fprintf (stderr, " -a[lpha] .pgm read PNG alpha channel as pgm-file\n"); + fprintf (stderr, " -h | -? print this help-information\n"); +} + +/* + * pnm2png + */ + +BOOL pnm2png (FILE *pnm_file, FILE *png_file, FILE *alpha_file, BOOL interlace, BOOL alpha) +{ + png_struct *png_ptr = NULL; + png_info *info_ptr = NULL; + png_byte *png_pixels = NULL; + png_byte **row_pointers = NULL; + png_byte *pix_ptr = NULL; + png_uint_32 row_bytes; + + char type_token[16]; + char width_token[16]; + char height_token[16]; + char maxval_token[16]; + int color_type; + unsigned long ul_width, ul_alpha_width; + unsigned long ul_height, ul_alpha_height; + unsigned long ul_maxval; + png_uint_32 width, alpha_width; + png_uint_32 height, alpha_height; + png_uint_32 maxval; + int bit_depth = 0; + int channels; + int alpha_depth = 0; + int alpha_present; + int row, col; + BOOL raw, alpha_raw = FALSE; + png_uint_32 tmp16; + int i; + + /* read header of PNM file */ + + get_token(pnm_file, type_token); + if (type_token[0] != 'P') + { + return FALSE; + } + else if ((type_token[1] == '1') || (type_token[1] == '4')) + { + raw = (type_token[1] == '4'); + color_type = PNG_COLOR_TYPE_GRAY; + bit_depth = 1; + } + else if ((type_token[1] == '2') || (type_token[1] == '5')) + { + raw = (type_token[1] == '5'); + color_type = PNG_COLOR_TYPE_GRAY; + get_token(pnm_file, width_token); + sscanf (width_token, "%lu", &ul_width); + width = (png_uint_32) ul_width; + get_token(pnm_file, height_token); + sscanf (height_token, "%lu", &ul_height); + height = (png_uint_32) ul_height; + get_token(pnm_file, maxval_token); + sscanf (maxval_token, "%lu", &ul_maxval); + maxval = (png_uint_32) ul_maxval; + + if (maxval <= 1) + bit_depth = 1; + else if (maxval <= 3) + bit_depth = 2; + else if (maxval <= 15) + bit_depth = 4; + else if (maxval <= 255) + bit_depth = 8; + else /* if (maxval <= 65535) */ + bit_depth = 16; + } + else if ((type_token[1] == '3') || (type_token[1] == '6')) + { + raw = (type_token[1] == '6'); + color_type = PNG_COLOR_TYPE_RGB; + get_token(pnm_file, width_token); + sscanf (width_token, "%lu", &ul_width); + width = (png_uint_32) ul_width; + get_token(pnm_file, height_token); + sscanf (height_token, "%lu", &ul_height); + height = (png_uint_32) ul_height; + get_token(pnm_file, maxval_token); + sscanf (maxval_token, "%lu", &ul_maxval); + maxval = (png_uint_32) ul_maxval; + if (maxval <= 1) + bit_depth = 1; + else if (maxval <= 3) + bit_depth = 2; + else if (maxval <= 15) + bit_depth = 4; + else if (maxval <= 255) + bit_depth = 8; + else /* if (maxval <= 65535) */ + bit_depth = 16; + } + else + { + return FALSE; + } + + /* read header of PGM file with alpha channel */ + + if (alpha) + { + if (color_type == PNG_COLOR_TYPE_GRAY) + color_type = PNG_COLOR_TYPE_GRAY_ALPHA; + if (color_type == PNG_COLOR_TYPE_RGB) + color_type = PNG_COLOR_TYPE_RGB_ALPHA; + + get_token(alpha_file, type_token); + if (type_token[0] != 'P') + { + return FALSE; + } + else if ((type_token[1] == '2') || (type_token[1] == '5')) + { + alpha_raw = (type_token[1] == '5'); + get_token(alpha_file, width_token); + sscanf (width_token, "%lu", &ul_alpha_width); + alpha_width=(png_uint_32) ul_alpha_width; + if (alpha_width != width) + return FALSE; + get_token(alpha_file, height_token); + sscanf (height_token, "%lu", &ul_alpha_height); + alpha_height = (png_uint_32) ul_alpha_height; + if (alpha_height != height) + return FALSE; + get_token(alpha_file, maxval_token); + sscanf (maxval_token, "%lu", &ul_maxval); + maxval = (png_uint_32) ul_maxval; + if (maxval <= 1) + alpha_depth = 1; + else if (maxval <= 3) + alpha_depth = 2; + else if (maxval <= 15) + alpha_depth = 4; + else if (maxval <= 255) + alpha_depth = 8; + else /* if (maxval <= 65535) */ + alpha_depth = 16; + if (alpha_depth != bit_depth) + return FALSE; + } + else + { + return FALSE; + } + } /* end if alpha */ + + /* calculate the number of channels and store alpha-presence */ + if (color_type == PNG_COLOR_TYPE_GRAY) + channels = 1; + else if (color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + channels = 2; + else if (color_type == PNG_COLOR_TYPE_RGB) + channels = 3; + else if (color_type == PNG_COLOR_TYPE_RGB_ALPHA) + channels = 4; + else + channels = 0; /* should not happen */ + + alpha_present = (channels - 1) % 2; + + /* row_bytes is the width x number of channels x (bit-depth / 8) */ + row_bytes = width * channels * ((bit_depth <= 8) ? 1 : 2); + + if ((png_pixels = (png_byte *) malloc (row_bytes * height * sizeof (png_byte))) == NULL) + return FALSE; + + /* read data from PNM file */ + pix_ptr = png_pixels; + + for (row = 0; row < height; row++) + { + for (col = 0; col < width; col++) + { + for (i = 0; i < (channels - alpha_present); i++) + { + if (raw) + *pix_ptr++ = get_data (pnm_file, bit_depth); + else + if (bit_depth <= 8) + *pix_ptr++ = get_value (pnm_file, bit_depth); + else + { + tmp16 = get_value (pnm_file, bit_depth); + *pix_ptr = (png_byte) ((tmp16 >> 8) & 0xFF); + pix_ptr++; + *pix_ptr = (png_byte) (tmp16 & 0xFF); + pix_ptr++; + } + } + + if (alpha) /* read alpha-channel from pgm file */ + { + if (alpha_raw) + *pix_ptr++ = get_data (alpha_file, alpha_depth); + else + if (alpha_depth <= 8) + *pix_ptr++ = get_value (alpha_file, bit_depth); + else + { + tmp16 = get_value (alpha_file, bit_depth); + *pix_ptr++ = (png_byte) ((tmp16 >> 8) & 0xFF); + *pix_ptr++ = (png_byte) (tmp16 & 0xFF); + } + } /* if alpha */ + + } /* end for col */ + } /* end for row */ + + /* prepare the standard PNG structures */ + png_ptr = png_create_write_struct (PNG_LIBPNG_VER_STRING, NULL, NULL, NULL); + if (!png_ptr) + { + return FALSE; + } + info_ptr = png_create_info_struct (png_ptr); + if (!info_ptr) + { + png_destroy_write_struct (&png_ptr, (png_infopp) NULL); + return FALSE; + } + + /* setjmp() must be called in every function that calls a PNG-reading libpng function */ + if (setjmp (png_jmpbuf(png_ptr))) + { + png_destroy_write_struct (&png_ptr, (png_infopp) NULL); + return FALSE; + } + + /* initialize the png structure */ + png_init_io (png_ptr, png_file); + + /* we're going to write more or less the same PNG as the input file */ + png_set_IHDR (png_ptr, info_ptr, width, height, bit_depth, color_type, + (!interlace) ? PNG_INTERLACE_NONE : PNG_INTERLACE_ADAM7, + PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + + /* write the file header information */ + png_write_info (png_ptr, info_ptr); + + /* if needed we will allocate memory for an new array of row-pointers */ + if (row_pointers == (unsigned char**) NULL) + { + if ((row_pointers = (png_byte **) malloc (height * sizeof (png_bytep))) == NULL) + { + png_destroy_write_struct (&png_ptr, (png_infopp) NULL); + return FALSE; + } + } + + /* set the individual row_pointers to point at the correct offsets */ + for (i = 0; i < (height); i++) + row_pointers[i] = png_pixels + i * row_bytes; + + /* write out the entire image data in one call */ + png_write_image (png_ptr, row_pointers); + + /* write the additional chuncks to the PNG file (not really needed) */ + png_write_end (png_ptr, info_ptr); + + /* clean up after the write, and free any memory allocated */ + png_destroy_write_struct (&png_ptr, (png_infopp) NULL); + + if (row_pointers != (unsigned char**) NULL) + free (row_pointers); + if (png_pixels != (unsigned char*) NULL) + free (png_pixels); + + return TRUE; +} /* end of pnm2png */ + +/* + * get_token() - gets the first string after whitespace + */ + +void get_token(FILE *pnm_file, char *token) +{ + int i = 0; + + /* remove white-space */ + do + { + token[i] = (unsigned char) fgetc (pnm_file); + } + while ((token[i] == '\n') || (token[i] == '\r') || (token[i] == ' ')); + + /* read string */ + do + { + i++; + token[i] = (unsigned char) fgetc (pnm_file); + } + while ((token[i] != '\n') && (token[i] != '\r') && (token[i] != ' ')); + + token[i] = '\0'; + + return; +} + +/* + * get_data() - takes first byte and converts into next pixel value, + * taking as much bits as defined by bit-depth and + * using the bit-depth to fill up a byte (0Ah -> AAh) + */ + +png_uint_32 get_data (FILE *pnm_file, int depth) +{ + static int bits_left = 0; + static int old_value = 0; + static int mask = 0; + int i; + png_uint_32 ret_value; + + if (mask == 0) + for (i = 0; i < depth; i++) + mask = (mask >> 1) | 0x80; + + if (bits_left <= 0) + { + old_value = fgetc (pnm_file); + bits_left = 8; + } + + ret_value = old_value & mask; + for (i = 1; i < (8 / depth); i++) + ret_value = ret_value || (ret_value >> depth); + + old_value = (old_value << depth) & 0xFF; + bits_left -= depth; + + return ret_value; +} + +/* + * get_value() - takes first (numeric) string and converts into number, + * using the bit-depth to fill up a byte (0Ah -> AAh) + */ + +png_uint_32 get_value (FILE *pnm_file, int depth) +{ + static png_uint_32 mask = 0; + png_byte token[16]; + unsigned long ul_ret_value; + png_uint_32 ret_value; + int i = 0; + + if (mask == 0) + for (i = 0; i < depth; i++) + mask = (mask << 1) | 0x01; + + get_token (pnm_file, (char *) token); + sscanf ((const char *) token, "%lu", &ul_ret_value); + ret_value = (png_uint_32) ul_ret_value; + + ret_value &= mask; + + if (depth < 8) + for (i = 0; i < (8 / depth); i++) + ret_value = (ret_value << depth) || ret_value; + + return ret_value; +} + +/* end of source */ + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.sh b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.sh new file mode 100644 index 000000000..d79df2fae --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngminus/pnm2png.sh @@ -0,0 +1,42 @@ +#!/bin/sh +# -- grayscale +./pnm2png basn0g01.pgm basn0g01.png +./pnm2png basn0g02.pgm basn0g02.png +./pnm2png basn0g04.pgm basn0g04.png +./pnm2png basn0g08.pgm basn0g08.png +./pnm2png basn0g16.pgm basn0g16.png +# -- full-color +./pnm2png basn2c08.ppm basn2c08.png +./pnm2png basn2c16.ppm basn2c16.png +# -- palletted +./pnm2png basn3p01.ppm basn3p01.png +./pnm2png basn3p02.ppm basn3p02.png +./pnm2png basn3p04.ppm basn3p04.png +./pnm2png basn3p08.ppm basn3p08.png +# -- gray with alpha-channel +./pnm2png -alpha basn6a08.pgm basn4a08.pgm basn4a08.png +./pnm2png -alpha basn6a16.pgm basn4a16.pgm basn4a16.png +# -- color with alpha-channel +./pnm2png -alpha basn6a08.pgm basn6a08.ppm basn6a08.png +./pnm2png -alpha basn6a16.pgm basn6a16.ppm basn6a16.png +# -- grayscale +./pnm2png rawn0g01.pgm rawn0g01.png +./pnm2png rawn0g02.pgm rawn0g02.png +./pnm2png rawn0g04.pgm rawn0g04.png +./pnm2png rawn0g08.pgm rawn0g08.png +./pnm2png rawn0g16.pgm rawn0g16.png +# -- full-color +./pnm2png rawn2c08.ppm rawn2c08.png +./pnm2png rawn2c16.ppm rawn2c16.png +# -- palletted +./pnm2png rawn3p01.ppm rawn3p01.png +./pnm2png rawn3p02.ppm rawn3p02.png +./pnm2png rawn3p04.ppm rawn3p04.png +./pnm2png rawn3p08.ppm rawn3p08.png +# -- gray with alpha-channel +./pnm2png -alpha rawn6a08.pgm rawn4a08.pgm rawn4a08.png +./pnm2png -alpha rawn6a16.pgm rawn4a16.pgm rawn4a16.png +# -- color with alpha-channel +./pnm2png -alpha rawn6a08.pgm rawn6a08.ppm rawn6a08.png +./pnm2png -alpha rawn6a16.pgm rawn6a16.ppm rawn6a16.png + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/README b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/README new file mode 100644 index 000000000..ec4af9473 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/README @@ -0,0 +1,105 @@ + +pngsuite +-------- +(c) Willem van Schaik, 1999, 2011, 2012 +Two images are by Glenn Randers-Pehrson, 2012 + +Permission to use, copy, modify, and distribute these images for any +purpose and without fee is hereby granted. + +The 15 "bas*.png" images are part of the much larger PngSuite test-set of +images, available for developers of PNG supporting software. The +complete set, available at http:/www.schaik.com/pngsuite/, contains +a variety of images to test interlacing, gamma settings, ancillary +chunks, etc. + +The "ft*.png" images are "free/libre" replacements for the transparent +corresponding t*.png images in the PngSuite. + +The images in this directory represent the basic PNG color-types: +grayscale (1-16 bit deep), full color (8 or 16 bit), paletted +(1-8 bit) and grayscale or color images with alpha channel. You +can use them to test the proper functioning of PNG software. + + filename depth type + ------------ ------ -------------- + basn0g01.png 1-bit grayscale + basn0g02.png 2-bit grayscale + basn0g04.png 4-bit grayscale + basn0g08.png 8-bit grayscale + basn0g16.png 16-bit grayscale + basn2c08.png 8-bit truecolor + basn2c16.png 16-bit truecolor + basn3p01.png 1-bit paletted + basn3p02.png 2-bit paletted + basn3p04.png 4-bit paletted + basn3p08.png 8-bit paletted + basn4a08.png 8-bit gray with alpha + basn4a16.png 16-bit gray with alpha + basn6a08.png 8-bit RGBA + basn6a16.png 16-bit RGBA + + ftbbn0g01.png 1-bit grayscale, black bKGD + ftbbn0g02.png 2-bit grayscale, black bKGD + ftbbn0g04.png 4-bit grayscale, black bKGD + ftbbn2c16.png 16-bit truecolor, black bKGD + ftbbn3p08.png 8-bit paletted, black bKGD + ftbgn2c16.png 16-bit truecolor, gray bKGD + ftbgn3p08.png 8-bit paletted, gray bKGD + ftbrn2c08.png 8-bit truecolor, red bKGD + ftbwn0g16.png 16-bit gray, white bKGD + ftbwn3p08.png 8-bit paletted, white bKGD + ftbyn3p08.png 8-bit paletted, yellow bKGD + ftp0n0g08.png 8-bit grayscale, opaque + ftp0n2c08.png 8-bit truecolor, opaque + ftp0n3p08.png 8-bit paletted, opaque + ftp1n3p08.png 8-bit paletted, no bKGD + +Here is the correct result of typing "pngtest -m bas*.png" in +this directory: + +Testing basn0g01.png: PASS (524 zero samples) + Filter 0 was used 32 times +Testing basn0g02.png: PASS (448 zero samples) + Filter 0 was used 32 times +Testing basn0g04.png: PASS (520 zero samples) + Filter 0 was used 32 times +Testing basn0g08.png: PASS (3 zero samples) + Filter 1 was used 9 times + Filter 4 was used 23 times +Testing basn0g16.png: PASS (1 zero samples) + Filter 1 was used 1 times + Filter 2 was used 31 times +Testing basn2c08.png: PASS (6 zero samples) + Filter 1 was used 5 times + Filter 4 was used 27 times +Testing basn2c16.png: PASS (592 zero samples) + Filter 1 was used 1 times + Filter 4 was used 31 times +Testing basn3p01.png: PASS (512 zero samples) + Filter 0 was used 32 times +Testing basn3p02.png: PASS (448 zero samples) + Filter 0 was used 32 times +Testing basn3p04.png: PASS (544 zero samples) + Filter 0 was used 32 times +Testing basn3p08.png: PASS (4 zero samples) + Filter 0 was used 32 times +Testing basn4a08.png: PASS (32 zero samples) + Filter 1 was used 1 times + Filter 4 was used 31 times +Testing basn4a16.png: PASS (64 zero samples) + Filter 0 was used 1 times + Filter 1 was used 2 times + Filter 2 was used 1 times + Filter 4 was used 28 times +Testing basn6a08.png: PASS (160 zero samples) + Filter 1 was used 1 times + Filter 4 was used 31 times +Testing basn6a16.png: PASS (1072 zero samples) + Filter 1 was used 4 times + Filter 4 was used 28 times +libpng passes test + +Willem van Schaik + +October 1999 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g01.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g01.png new file mode 100644 index 0000000000000000000000000000000000000000..e31e1c7a635b50e22b6d02ab8ba21f8099b39faa GIT binary patch literal 164 zcmeAS@N?(olHy`uVBq!ia0vp^3Lwk~Bp9L@-6Me%OS+@4BLidG0>c;6;z7cmE{-7_ zGj-2wzopr084i?r2qf` literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g02.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g02.png new file mode 100644 index 0000000000000000000000000000000000000000..68809dd8fc0993ddebce8aa9c7bf9bbecbd36cfc GIT binary patch literal 104 zcmeAS@N?(olHy`uVBq!ia0vp^3Lwk`Bp75C+I9jdmUKs7M+U~W1%@xC#RK{Bo-U3d y5>t~CIAXub_k1+y2sp$L+}6)%%qgEdVJADoUeEf*_U-^?kP)7)elF{r5}E*i=NeZ4 literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g04.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g04.png new file mode 100644 index 0000000000000000000000000000000000000000..6fa089cb8a4ba0e8421ea05d33676856f0cac93c GIT binary patch literal 145 zcmeAS@N?(olHy`uVBq!ia0vp^3Lwk^Bp4c;6;(>fePZ!4! zi{9jv1QiAmjuV@CSXq1cIW&KKm$y%-G>{Q7I3+kCJ!Mg43=bP?PydHg|Nfu<(f+K^ hPy#6PU}|a#3q!!ue}#oBxm7@xc)I$ztaD0e0szfSD4qZS literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g16.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn0g16.png new file mode 100644 index 0000000000000000000000000000000000000000..318ebcadf4fd0b64fb9b824e81c0cc8e3dfd2d82 GIT binary patch literal 167 zcmeAS@N?(olHy`uVBq!ia0vp^3Lq>1BpBEle`W(ImUKs7M+U~W1%@xC#RK_qo-U3d z9-UV&8FC#k;BgMLjDBB#?9PJ82Q;dUu4=I?zS(bY(Xf0+xUg{Y0;{G3S&o?ucbmRB zoML$)c8ASL&0+fj+X+UDyI8k3PT;(to58=tC&50S{f++@NsIIK3}QFDZ^ZA8J8=o* N0#8>zmvv4FO#l#XIHLdn literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn2c08.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn2c08.png new file mode 100644 index 0000000000000000000000000000000000000000..21d2f91a868fc637fdae4fba6c87bfd09b158815 GIT binary patch literal 145 zcmeAS@N?(olHy`uVBq!ia0vp^3LwnE1SJ1Ryj={WSkfJR9T^zg78t&m77yfmc)B=- zcyzwKdXSUBfQQMU_07b;+lz#)U9`U}{BiD~_7+|i>jo~7A2JKxKB@JoaA;)W_iC3v r)WR;J@nJ!Uh4M;=#@z+wiw`h1ZTuN$cYX2NTxus~-YE?|ew94KIo9tHTv?hhRR zwrA%J^h9UxCeRmyPjW#d?oxNFL9(uFDZ1gBle+D$rIj`J+5;}Xa zfF63WfGT3xy1iYa$zve>zUQQss#Q*>R07*qoM6N<$g1`fR ASpWb4 literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn3p01.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn3p01.png new file mode 100644 index 0000000000000000000000000000000000000000..a21db5977462c4c0985a0ca1ac2d67ec572d3d17 GIT binary patch literal 112 zcmeAS@N?(olHy`uVBq!ia0vp^3LwnL3?x0byx0z;SkfJR9T^zg78t&m77ygJ1^9%x zzWcAFl=eSI>XI5zMAXy8F@$4g@&k4zHj_up0tD0@h%3W?AY}Lt#0>va?X`CSX(dk=#}J9B$v@Vz>816FsF9(VN75txh7sS~8e>Vez z3y|e5zLEEca@?OO&kPSTILuD+yidi?7W^QF z0=7twg95}IGPB`0p){BIDdQnXEGb?R1lBYr!w>|Li8PIP)G{}a$YQ`p%(`K)LO3UD z6M@=IHq>+iwp~U6B7p@ho9?k)W)s^cNfJ5alp|5o3vi!RBHkmgX}UWIuw)VII#g=d z$04w7jssURBxceP_z6C6HW{SZU_uGkHHZpyqy!k&kY2+c1*akQFoehhD3_nQ9ng;b z0F#8v3ad!gP>4LFqCR|KhXmq>PACHhpyFVSOH8CTvPiZqN$iqqnyfQJ&?bvale$n1 zTv^)Th9oKqsKIPjfKCD1Cd3{VRFz%0i$*94z+D%LEeH_80824wDGaq4ThALK_0kH^LL!W!ET%TWXjP zf+UjIVU&gj2dkjg55o;~Er9W|;Xj52QG;=_Fb4{JL{~@@LhLOJ3noJ*c>^l+tMCGO zCYz+He>Pl<|Ld_f zqkm1#%jMM-%}evv+<)~($raC^D<>wy%g2N5PX<@DWeyA$O75|=jlHcE2YqXoq<-r^ zSF~%HYo3ID?48vDt>55dBr2eB{o9GWV*`fG5Jx3PvhgDLYTpZ#Qi+|CPMFK>V8kJOfm z#*Z=w{NC;LVI4^y_wGIZ+0l95T|3etXWUAydp~nc!u}QYkLn)pJU@Hlx;E!j?tzqu zY2yX+->z>?3??Uzz4BVazO+Xz%j8eHAEZy_UHonH-GsLIpF6E1$sG&stX%!v*c@Yf zL&of5NeNZAyW0FGPYv%K9`*NV3kUPJUh!4N^d%dUzFDUR&e(zJm#a=^UXXnc(yA(I z-;o2p70nAqE-$V851jZH`@`rk4UEa{HEjtq=#3k+XOiwE*eJzX3_ zJUWyAoIh}Yv2{*{iJ{UQo%@m+%sTdM`xqA|8c4B)7$%qqxF2rNV(Vdhlpzstn1SKG XmO|}<{e=-g0~kDA{an^LB{Ts5zRx3; literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn4a16.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn4a16.png new file mode 100644 index 0000000000000000000000000000000000000000..6dbee9fbdb93f3535be23326a52fb4d3ac60711e GIT binary patch literal 2206 zcmV;P2x0e$P)kEEkx>-b1@Qb$y-ohUek5*oTfx-A#6y^c`Q zE+sS)yU66wLTO83iFXm5i(N>*n3Idp^rFd-7Fe(v0)u8Hg(Rko(t3o_;+1WoY3fR? z;u%**k?mvsIhJ?vei@;3*EJZKPsh^xKJW8B&+`FbWnox{J*QyQf)~!hu>m;#N5~Gr z*+0X@UGUyz_~;4v=U?IOURb{_zjyb_*+);vGZ%Ns|73^cGmZ_&XO3F(9mBeOCxB*U zp=MjTt{LzZp}PWF5dym*a0v7!gx-ecb!ZpC(_mu+I?n=c$cJ>2a^`8!UXW*-DOjHb z_YkaIf>i_R6{x46R)AUxtZXgQHLOFeVC9@tBpY?%Ar~H6|39xka0c+50pEqb_xeL; z>a}V>WX7?rbSB#R07d+ApMY-yAH>T3O$tpzVWT4D`KV9D#5e8fT$B0UQ0W`4d&ZJhZPsBMV$%MrM45S^qKLL>pn6E&%2tD%( zfxsaMlx61rFQs$e8K{_6R*OS$5R5?x4}vuajX`MdfzF^5&@Mrv1ZyRz{~eqXESKOv zC8(4kRQ&NCC3e`!t zTZ4s<;Z`0-CLBBdHEi7qkvf2J|EZXCOGP5NH>n6_-74c*6GZ37L6suXG-K z4CW`TtWk#kGCXQS`*SIvW& ze;)x)gZ678GOZ6~)z<4mILi{)`)Xj6VJ;rYMiMZbfJQTN3< z-w!`MDg}Ig4z9ir2NE@VR~cfbAbJpyzjJG1I)@lji+);sjI05nfaPE90J3cN2oI4LMzvS4Dmtmj`)-)Kipf5lm0R9Eg z($KwIiQO+n{(bK$1b72BlcMdLkBGu;UX?xXbcF5RDVcdAA)Swp!;446R4=_#v$t=D zz6+p#1O8K>O@QxD;PZj64qX$_)dyW8(DgUyDgtM~$B+D@)ok(ejv=nLaagq78xe(T zwPerTQDOVyHJSOj^U^uMi$~z)m*DX-4D18zgc`veH3Ac~yc)q}HG(AgY|tG00TSjE z39l#;mV|^Wv$E%vxUl`|`!e(G+og+_Uy_0jBw$w@Vv`WfKS07T1Ph9UIYq+fpnH!( z;D2j4rPeSn#&p)`Qj5U(Rr4MKU)UxPqX ztzk;7p<_#oYK2so@RX&V5M!xUMP3&^7LnOocI;h>?fN%Tz`#D~+=;_n9NcNR_n;7s zK<_CC-2h!vLX-smkV2q&9h#r2B=eN=^OCsQ(voQVt-L7Q&L?Hht!ZI9$joDt(z!bg z^OMk=0QYNHU4=*(%mVbj1IA4y#YrW_j;#XZ?^TR?UBZO(f>>&$BE~W@;n+h@D`@Wu z$+QV6z?hYpZ?mNH=7bd79)?B(Toc^9GNU(@8Kod-D+Jaj!40VlcSDlQ@=@{gQdwLr z{7&Zb}S~Y7L5w23`5q-r&J^mkTcViXI59GbI+3oJQLb^Xa=CM0~+5#BMC-O zA+UA{R^F8K>THn=w^)!Q^Kf1Hd0kwsr!Ly=Ul4@@*>gQCY&S<_=B_E7dnQy&=%m3* zDCd0zS}ADFD+E>zs2dWUs|O`O4x}A>>t~W=B5CF4X>qmStD@~)iUV3+_B@mqwwnc+ zd9xs$chb^OXB50E(5^x|39aW80`&^qb0xPgtMuBRkPK&4ggm`H%Fo9{P`Y=EwuAib zKPY=1x*=>g=Va#1fOOs&mBuk$A(S{Hf;FuuV#)d7sbeoV@Fcz z#`3Pp?K3L97A3<4ijriy)kU_eC)4|}U(UH||907*qoM6N<$f-(OD1poj5 literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn6a08.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/basn6a08.png new file mode 100644 index 0000000000000000000000000000000000000000..61062308548bc3a5255e3e8dbb7f97932f00eb1c GIT binary patch literal 184 zcmeAS@N?(olHy`uVBq!ia0vp^3LwnE1|*BCs=fdzmUKs7M+U~W1%@xC#RK{Io-U3d z5v^~p8FDok@VGrxPs#9K_}xB~rC;&L-J`A*vOzBbH2%o@YTWE%G>EINoAZB{akFeG zt2^^4wiQ2lBNnjxnaU~EHpDcAJeJR?S{LDp`Fk}h0vV{=c>|`0F zY}t2XhO#pw*@@4+-}ija_s93gIp?4AJnwVP`=0Zh6Lm*li-YYn8vpunKbAURdar&!F_@9SoS%FU_nL5v4bhxdo;qYV}(%9Z85QFC@Q_IDD58Vx)&SPd#1 z&_z21b`BlfZb@Z16}%Yv2Xg?CHRMe7qkJ)iJY&NQ*3GZeU+ur74iHv1P36E6yN%N5 zpV$8~7z8Rae`?A#-PAcaas4$5zYproUQo8+k=bWG?@3hw>tAT`15|X+#pzBR*EFaZTfujS2W+R%rAX5GszY`8KG_1tm1wxz^bYuH^_iu1 z#`8Dkd|UXn0~66IH5Y)%1^wg@FJA3z9$T7YRh1FE(o z&iHoiEcavc!3({fssSC{c=<uH$6|lJ`Cw^#7+?9Oeh5*sk;TrZA_sxq|m5T=dEMGV0i z^PYDhxn{(1ZN~3SMiq)&y^i@u;6U{BWs8VI#ZOVtSIoPu#Uy>G@F^}60slpM% z4fg4f0@c(&o=lnNB5(wh%7VCL!-EVW2Z|!o{aAn*D%&65S@(Uw9aQtxwD)dfkbS0D zN4fECZ9%?vJvB6eQZ4WGA92VxeEjiXK}uR*cR55gZ_cQBgwFlZzlpoCI^@-;A(;$?Ag&)@JLm6Q6RE$C5WB$XVqD_cH4>}=w0RmK|UFq zqT&JFo{xshQhkO07xrmHL>wC3kOr5B~p#zX7$p_c_}QIK>i^mAbP z(RxI|(i~*Q0#6E}svtMT(M} zh+aH!wG#=NVm~3Dv%@S5-kh)W{c#dFYEqq2IfIFM+s<@5JzKFU(kzGaEKDY05{~)y z&m>r1+fS3X-!8#9ZC}|9nR|zJTO|nFEi^1Tfpt@Ll^mIY?oP}|^w=aDOTn=uec<16y1Ij2viXQ-skm0LAjJTsD=F!#DdRhpGW%{rtjIuduzuQ<{wdf>RTZ$_*JNG)(wu0^Ec6FbT<6xqSx? z_!3zIUUfCS)6fLwA!%9Yvs}RFb1bBZaM#FX`Dt@6LHtQA1;AaBd4qVKP{nI32V#wJ z&XhLUx0p{l^jo|vK~SZ`ptJ4mne>h=EQ)IBapSiJu{K;#J#&J6T*;znj93+*IlB6?-&YMGi|#xn!fR)W?0*~Y-v zJb%t6l>}jz9_AsI@@RuRW(OUfTdY%wuhTG}3Ve9pnfH+Qw4C3B8)Pv=6}W4d99_e^ z#9AT03q=Y1K=%(%UJPCeUhitoH`-hON*?knX(%Hos$uAK073oP!1*Xq-mClxyor$@ z}heD;=s0m{le|mRTbo3Wp+E$278tBRf$HlP|fM)?++96CPyL1+wsjf zVk53I^h-S=*7nAhx<|s)bJ8w@jBPCFcgym*E9ryTcW-vs2fn~wpR?z?3`C&?_rYej3k<^}V2IPiv-8;{mgi2hH ztlSGT$s1@-?Cm1cFWbX9F{sRWv(?cibljVBrb znh0Bb)h@WE8=d#nxg!?mgZ_jv{v*Mtb>{rWq@mQ%GO4pYbYY3NhtwS%vk@F6@Cv0q z;32kUm2%K;GCpIm7nY^O2baB-b57D+>*@DbC6}<(k6UKuV_t7>0Ad1l2vQK9%E7Iu z&(5t^!vq|;yR##&(?y9Bxh>PK;x24md0z_`OZ&EXN0znDnHMLgT0vE z_yTz|TbH$rwir9{GXE3${#InnMxfp1xrN`krccn6rI*N0fJ7fVs@lf)c+k@Bj%@7x zn2jh^(!=IcnGPq-s=mA+pAQRc3WQ}3(CFdc(eD`%-gjE}`d9j0woiiIO||T#+v6=j zd(Vm%BvEfmcrs6v+tJ!B*r>Oomj6Yn^vw~qcjX^|m%*OM51be;(%YN8T!+aSl}jzO z!y8LjI?!s%Jnta+*LWjuuoDMp8d{FnQWAsFx^5}~^aqjGKt--Tz&i+DWSigz|HVB- z?p9v``EK^JY(aBjc6TFYcV~A?IDo|@Q%5w24{w**chBHLlrK0ny!nC(PsT1>Hqnih z{Bkl=fi=xu0ZFjuFh^xM2sQ&sXR~!_Qd=m2&L2Axw6>g3OQD`iWxG zSjeAUfi`M4@n+JdMglmRaM{EnaIoCk%7r&sK1kSNCR{49-Ta zj?6y#Lz!(+99uqME>10f)qmtbigTu-hI=Xb4zcPc{eH2y_7vv*s( z*^3PwpUJg-5C=DiVuy>>a!|8$e5K?M)}J02FLf0O{QRMti|gU9yM zpsH)mY4IMnhuIFS$5RU7~2?v;79du#tuwYQ>a&%Fgu_O4vfdD?GSMM7;DjgQN$$5yJ5Wm9E z+5bP`$n$a@o=x-l8#oqN8qI&s(D|rVAxZ9n%ri5ALOz#2%tAd1O%M6amNPJH^j176 T`tP7S&>99$S3j3^P6NS%G|}k|4ie z28Oc9XDvXyByV>Y28LC=%0@t5f~SjPh{WaI^M+gp3^-T=3csiv4Q}hPY)zR|f6C0w zxJ2XcWoMTCF7}HoGFZJm8u^!HI&jaJ_kuGy=R#8y15drw_Xvx6CN;KWxv0ZanUbL``{xlqk(oYc)I$ztaD0e0sz+MK9T?c literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbbn0g04.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbbn0g04.png new file mode 100644 index 0000000000000000000000000000000000000000..39a7050d27af28f3bcb7bfc6b071cae91f8c091b GIT binary patch literal 429 zcmV;e0aE^nP)eGf1AoYPn=%bN?oV&q3&xZP#{- zd#wGeV8okcyH@o)cboHb1rrf^jB^?sG2T2?@G1n)CJc@hyhCf)&E8%^0~1oF;v>7S z;6sBJiji@r0Yq=mmR;)Ojr>$W46R-Sau7HO7xZFtI1{|4z%-nLbW=B z3o0EAC)h$;8WIR1rohQ#w444G0#1m$Dj66xet|L#R>4C36e7xMM0T)(aSAa2XfV)D zcEU#my$(kCaRx~QL^LgQ_;=)3gHxFOXBZJd{maEJLqY3H<>rDuET^1Yth7z0>+1gi X{l69U>r1pj4E?y3$fw z3LPC~5Eu?Ow>bx*PBc1kWIARHF=os}<8u$TxvBB}f1oy5P`W{kzl6)>j^6kGfA2f- z`~RHyuLHPP3zER+gr^$apTp%;SiD#R;vJ2Rd{S@z+-2p1bTZD!RV+NOifLIU&uTs zaE81?yrhgg@q`IfRXqTjnr;GKFNW3KjX}4zVxZ4FgXd*s(ZFE9a5b7MKz26X)$9LG z&+U!?)zyVy3pqr7Bq1d50~sfsq>_}A+FGpRrY7tX9#13)1Tctg+c1b-yYP7603Ht= z!sEyY-tFzh#G0G016J#8z+$-u)Ys$P_ICWwmKHpkOd3!^xI`}9Pq-4f{bx0*+^SE_VlClnoi%|Y#7Z`h22w+;)xK8=@ykF38Wv&SbTQ0gnee+4}W(MW;&#YW1^ZP6=>`(a|rw5FIVVzI~X$*|S2# z#!gMe#Z=9B;j7ZcOd6B9%84Llg;62WOyR`&K*R&qyjI668Uj`Z|E0BdPrAU)mb3U z=~5vE2k|lQz4vDV3dQ)iLcy)1R&U>~RtxF%*YPf{2T4htok>Yuq?_=<#C@GZ=iYo5 z=;^^{Ll6SH>ZM@SDqJsaz8SmF;>CE>Y861E`I*cqfgzHR(9)8SfC~}N^;pQUV?snm zo;VR1X|s8~Hd|WSz(87>ka+ppv`GlL-0PLgx$e0gIE@Ozq2ur@DhdbZ&T-vi=%uA{ zke>b^i2=#U2|%mmwg3D$XH8&?$YhO;GMNy&cVi*2uK^!^h{x}~6Cx|i@6XCoC;|b6 zLP%p{c-`j{LaA(PQ!05pa651syuNY*7#3BC#C5-QYdp~Fal5x-1%_T%hj+WXu_HO1 zSQ$M%AtdlINl7uAQ&Rp+pr!_kf>jutJ}tzOC3gFgB?`sn&6ohpRG^~+6YzMHN?tF6 z)8Gvs_ItfP3Y9OUJ3g@%v-FJ~DU6%`p7 z)Olt$T~Sd!UsRM3M~+}20|P?D#rb@3aYB0gZM=f}n$%RcJ2lluI1TPj268{JSpMqw z(#Xj5ATJMVU8TZja7CF+c-LgQ0jykkmV}T1Z)>x&AAcP8jW9H!K(AMb#Kfwq#6%(9 zdJ7BLzaPqwJRVppB))>Rmzmkxnwc3qy>c2ne6jQN_2Kir{~kkZY{cD_MuP+Q&O34b zF&gnn<>h$S?_Ul|OJ@sx)&y8_ad~-hu@GD!97Re>K|xB&qDB4vixvs-(MMR6-Hvxh zNAcY06hf_bxzy_5Wv-p@`ik|vcQ5|p=ur%@xHuJLW+o7vbJnfHC+*q8Ezk(u?h8zy znS_T20^#98!p*WwR#+&LEn8-_E?XwV`1nk}hj4frZEhAqrE)q|DqbZx4c>IDBv*pr zVf@9&2+ll(g&73fVa*!eeB+b4x^SH6boqXx;$c0=OV$;L(@ za&nrQa&mYx$7%2ytRYH*og^*}=lHZV906rzC&2V{sF7S?0>KU+o}4^*waT#qxC!3? zz50+^bb0-!+_LIFVlkOn3uCR$oXN=hfy)oYZM=LTO5_V)JX0F)aUb#`{Px3~8K z45Cm8G#cZ?2?d2q03|3C!N$f8gK>%=kzAFOs;a7HXJsOhsJOUTC=>!T78DfJ0p#W7 zO#|fS<`x6+csvb_-PzgMH*VaxejVY*&B(||Pfw37i%v;TNli^nPEKZQ-I|z~7@ruA z92Sce8ykD3^-OehbYx^?czAeNSXdrFNJvO(?(>_pT_EMw{BQ#m>$Sn!qg3OkVyw9#4k*05u5X^#Wxw8I%DBhvS=>0kTjoKsJnz zkHa;PN~LfWvNvv&lMD4H5CQz1ooNFD1Ml8_0AO}^ckkGN(bYw&Ct|UTmX?<3ckj?> zcNB^Yu-39J8}w6t>_9>;(#;tUCqEAdt`EKrw%G5dUucga(q-6VG498*{K%rij4wv2 zoEfW%jzHYO{1#TLQQ`9W=k@mzoI;b9QinWz_A0mp3_C3m`>c%tC$KR#Xus#^maPqG>$Ip&r<7PP}+lo3xrqrK0bX_;b9>)$CG zYiDOPWRFqn6UcGDpA~Oj9{Dz;6-NwxejzAm$n^KEA< zw~yjS7UP676`?(gNA_%Ti&?JTRiQ)ukN>niNvk-4K4Y-(eYokz+n%p00U^e=@{X9+ z)rI4_;#GQ*EM)A{+^B9WciOLZ)vuJAK75`z`)0L0X_*pJxWq7Myp(uq&jr<7|o zLnIyhWR@l$6GSYpXJsSmv@J23K`FjDRPrN<`4!1UJg1FhP}`#*W-iAZNy`g6qae{l69U>r1pj4E?y3$fw z3LPC~5Eu?Ow>bx*PBc1kWIARHF=os}<8u$TxvBB}f1oy5P`W{kzl6)>j^6kGfA2f- z`~RHyuLHPP3zER+gr^$apTp%;SiD#R;vJ2Rd{S@z+-2p1bTZD!RV+NOifLIU&uTs zaE81?yrhgg@q`IfRXqTjnr;GKFNW3KjX}4zVxZ4FgXd*s(ZFE9a5b7MKz26X)$9LG z&+U!?)zyVy3pqr7Bq1d50~sfsq>_}A+FGpRrY7tX9#13)1Tctg+c1b-yYP7603Ht= z!sEyY-tFzh#G0G016J#8z+$-u)Ys$P_ICWwmKHpkOd3!^xI`}9Pq-4f{bx0*+^SE_VlClnoi%|Y#7Z`h22w+;)xK8=@ykF38Wv&SbTQ0gnee+4}W(MW;&#YW1^ZP6=>`(a|rw5FIVVzI~X$*|S2# z#!gMe#Z=9B;j7ZcOd6B9%84Llg;62WOyR`&K*R&qyjI668Uj`Z|E0BdPrAU)mb3U z=~5vE2k|lQz4vDV3dQ)iLcy)1R&U>~RtxF%*YPf{2T4htok>Yuq?_=<#C@GZ=iYo5 z=;^^{Ll6SH>ZM@SDqJsaz8SmF;>CE>Y861E`I*cqfgzHR(9)8SfC~}N^;pQUV?snm zo;VR1X|s8~Hd|WSz(87>ka+ppv`GlL-0PLgx$e0gIE@Ozq2ur@DhdbZ&T-vi=%uA{ zke>b^i2=#U2|%mmwg3D$XH8&?$YhO;GMNy&cVi*2uK^!^h{x}~6Cx|i@6XCoC;|b6 zLP%p{c-`j{LaA(PQ!05pa651syuNY*7#3BC#C5-QYdp~Fal5x-1%_T%hj+WXu_HO1 zSQ$M%AtdlINl7uAQ&Rp+pr!_kf>jutJ}tzOC3gFgB?`sn&6ohpRG^~+6YzMHN?tF6 z)8Gvs_ItfP3Y9OUJ3g@%v-FJ~DU6%`p7 z)Olt$T~Sd!UsRM3M~+}20|P?D#rb@3aYB0gZM=f}n$%RcJ2lluI1TPj268{JSpMqw z(#Xj5ATJMVU8TZja7CF+c-LgQ0jykkmV}T1Z)>x&AAcP8jW9H!K(AMb#Kfwq#6%(9 zdJ7BLzaPqwJRVppB))>Rmzmkxnwc3qy>c2ne6jQN_2Kir{~kkZY{cD_MuP+Q&O34b zF&gnn<>h$S?_Ul|OJ@sx)&y8_ad~-hu@GD!97Re>K|xB&qDB4vixvs-(MMR6-Hvxh zNAcY06hf_bxzy_5Wv-p@`ik|vcQ5|p=ur%@xHuJLW+o7vbJnfHC+*q8Ezk(u?h8zy znS_T20^#98!p*WwR#+&LEn8-_E?XwV`1nk}hj4frZEhAqrE)q|DqbZx4c>IDBv*pr zVf@9&2+ll(g&73fVa*!eeB+b4x^SH6boqXx;$c0=OV$;L(@ za&nrQa&mYx$7%2ytRYH*og^*}=lHZV906rzC&2V{sF7S?0>KU+o}4^J622^AeZriDs|F)fz44lCrgvCaK9(i)p7!%%LO z6LCs$SZ>MfJV}wPPOIFlR1QvYe%|MK-}ia{df)f+{c@b0>@`sOC;-qn<$!ZVI(j`f zDj^kjGph?}%2e!GEGVRlO(*lc0TkamJGz}*TU$#c5*r&IR@vH?l$6w=(b>AXMMXv1 zx04DB3jtEEU%$?+^=WBow*aI7Nl8fw2?+qjY&IL9hsk8d#>O5wLZs8_(b3V7k&zD74p)(r z6#W5wi5%j-eJnyYfy3casnmdg0P-cW&PSbeL&Go(2FJts`1l+vI)>xmtn;h^Zo*f9 zFF+!ZJUl$y-Q5WUf_a*`i;K%{;ch%0Z)Jtm(t1?CX%ln~ww zvI4CLn;>X`*DqdZX)#srsxB=p0rJcP5Q$0`7Z=q_)!{xs9cb~i;5IBQEI>6tCCtyy z&(6+*5T>W60ceneP(Tm>WPquush*y(ii(Z4cCD)F{LssxzP`RZfO2EwuCA_*j*dQn zArvZ!Mq?a5uB3Dcpag{?+Sxf^v1cR6WET~cs;a8FIk{LYE-o$>i9`TRH*Vah2Ph~g zm;uPo&o2hx^Z7bDJ92Y#uU)%#^(w-Tmz9;3nVA_=7L%5lmY$xTnwrYkv?)0`IX*ca z2^NbL7Z-QB?Q~2`OjJ}7l7z-JS_iG7g0sVN0Uz}3~&+1VKez@Wfj%a%*<6dWBL zfByUl>%J=rqtT`{H60urpc%{q%@q~D69^Qz2T+SJUKdaPBUi= zZ?YsBS+ans&A`7&dFaENu<+a*|IhOD!Fy5FU2($py#tmf$d>!3__F$7Rx`n0Xd`(x zXNPrB#Hf{`Do)y8Y}67x>Fw{qlr}T!YF_4_IUZux-oC*~jH=jeIQPaX!`r{y1WzBl z(m6wK7D&e$Zg(V>@2C;Wf~LRR?X8$9#=q?zc-|P5aetE9NbV#QTKGtM8suGqBBx#3 zxo@Q}hx+TEERS}!iYl~OZDE->d_uXdy?`@|M5G4?j`=QYAGR)#`a zvNJkHwy@!`Y;;2I`Sq)+{L9pEnB}|hM@{;rXnr^QKIxlagyn~gH+uDas6JD-A_hPD*sh|5-pZZezZNI zTBjQ-?c5``GX0PwW_dm>8`Y+1#_9&A`Q}k652Y3f(u)LcJ9%$iuabnh9D6vUApEqF nBzr1Qcj<%PHtn77gx$)ZQM<+~5{$JW7KKwMop80bl;r;b+-;m} literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbrn2c08.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbrn2c08.png new file mode 100644 index 0000000000000000000000000000000000000000..5cca0d621047cacf1637cf7d77e997d51cc6b15a GIT binary patch literal 1633 zcmV-n2A=teP))6_}Akuqmh*5X4X^rIbM;BH-v?$kU01p_ErCl=u4~ zL7fbz&H-~9!(}3aFu`RZW&unzb50QkgK2!RYsr=o3t~2tT^d3tzx&+X@9uj)%)Vj6 z{|IpB&Yj-g-pR?y{}^!Z-o3WAwzRagh=_<-fB!T`$I~7jJzDL9k&%A|7#|<+>gvkP z&5eqRQiO&cb#=`%Gt&SnAO*+-su`xq!J$j392p#Z_UzeG0aH^`SFc_zD=UkSkAGjG zNZGY3d;R({hG_tbfDeIqE;r1MUWVZftDkNW!h zs;jG$lamt?5{`w2W;;5Ta5(kAS>OWD3k(34fhLB@x3Eyz+ozkGX8`3uA)t^*Vq;_J zARVu%si6?50P_I-{r&0b>GXAy-pZYvJ_kMn+JSRiZt1pd#bWVg8=D~(>oza}`~v)> zM}7e)8HRFA`iDhFM^mix0K>z>DwQfHCnqyAGc`3;6%f#2ZhqFvO5^8uBq=H7FUwFU zT6XLhvbG*uwdz+cchJo2l$~8_P|)B15EmC05)$I?@88+kIS+9E{(W+tk&&UwQ56&v z(A`o(AH0rH_Tk~-0RaJGvDnww_wL=h^8j=?>6z)a6}IeCY}aO2b*Z|fq@=L0@WhD| zsSDdty^(jSiA*M&bM5WzEtks;bWvVj9&?GoHDC(zc6o7eG4)bKMMY_8X?Aw@u?6h# z;lshf`|a#hY<3Bkd&JHz$kWs3`0?Wg0OXPTF&CY{G^|Igi;9ZKH36!ss;DvOr&_J1 zx~1t&sZ>(M4;(lkk?c1!`x@w{b_L!AqU`OZt*xyF0OXE$lBa8(+d4*aQ!-UaQ=##! z_w+pDSx{e4UteEaTT3@Y0IErFaIj1kyl&n1z;8e!i?yF&L_nC8m3(Mu$N-?Zxp_n7 z2DAX*=>Wn$A?4)L>VvOzv*1+iR99Em(9l2wMRh0dROro{PXe>RH6x>UEG*vQa@TOV zQlU`t^yyOrfcExwL7@Om)cL>za2|4U%W^%=c<5%V3NB?X6h0+EjKsu5@-7xf85_?~ z_(n!?E-s$Cckkx$Tm=FtNq~V#ChO_xan5qaMSv9N2jF-3*7yqRh3Ek)Au1KoO;8fV zprIvzKyXeU{%KoVxrc`zkCz5CFib&h?McIcn>TN|Dcy8{RDkAq5^L3Kg|$LmUsXU< zBBJ4(W03sGWO5UeaSET!R&3c4%;9JOl9gkorlAz5VF1mVSE84$J}Q`0nqU|>1Di@4 ze5+F&_hR?T%1UBTp~Aw#cJ55qhku#R59RT^^+74-!fSSE~<7VgEJh?uUa0qm; z8Ez47t52=QkANEJ0t(=x^_iQy^73*TT0XxG7zGZwyYCSQ1YB+maEUU=$|_zAke{D# zTyIS3>>TO5U9}y3y6WrNG#}mt-ZU1(ApHmo3|zUggX&{s6zS#V<>Yh_y5_4hF$wDK z?p_S=`P`~WeyGw#>B+X26iZPz^D41kPE3=O0g4z6qf*N)=*PsGE4-+(Dp2{ zw2Zxeeeh*hh5=+_V`EuaSwV3@IIpj54kWn}jYdNZ8e`JrO`E(~ENUAnPWZ-+iMMY3 zY|zhwfLVQ0wY0S8#Df-Q7G&8n5<6nh7)vA)kx0bn+nAbqczMM?d^oX?lf?jYc4O#< zON|S4tujMN`;Hh?Jz7|PetuiGZY4pbYg^pItKUTv6B8tGw0Wp##Go?l literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbwn0g16.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftbwn0g16.png new file mode 100644 index 0000000000000000000000000000000000000000..99bdeed2b3b8564302d449e6578c4aca0f6261f5 GIT binary patch literal 1313 zcmV++1>X9JP)QBlsk;7PU%bhGrgYd5Q9YAv@pu5?I(QEIFDO9PIa zv;_;!pa1a#&4BOUPo0`ItE{ZJIBk{3V?$2;ETe5E7iFAugap!!JvpW;c(dAAQ8V< zZ&BY>NjD*)1qCrNK|y=>!VP%!s->l|vE8$;ud}nhz7j7eD@#re2?+@B@p<+PZorQp zO@$fmNmnXtCft}jxxc@;xf%mh0YPPDR#td8NVBJBWF$%~baiE3DVf#RJVAESq^VP< zPoFZSy}bqv6c$Ev8{HHsktow$V{lB`di z{%hX6Idl5@>guwxqN2jr>pYX5E|kJ^f&DqRx(f5PYbXXRS(0v=B3pVK=!U{clUf+^ zwk5aa8O@zLfBu36RaH?@k&$+SvH@a;con5$c|}DEZ2$iLjbgyIZE5`R>8TI9Qu-<< z%&Jo_i;I%V`!i?Gym|BImy|?C27OhSEj^vT%kqkchm?%||Dqzaq5gD9C*CIj-6lTnrHEYhC#6(Y5*#J=&#dFf1`ILEld3=?QfBAxDz@I+}XOr8) z_eUHoTv5Ut_PcOJ$k~z>P;}0k6%}PEBIC}VVH_mAk5_}&Lhw>xFqZ6`_b6dX!jw?c z%!-;Dfwv2)g69`EgOb#=Y2o48uO(Z#zd9_?))qGsnatzc{v3+|Jw5UA=}QBbWjreT z8u2D?TToHq>&cU+PVMgx3sZ_0b>T~KcQE76X3$TAY#mJXtlpDYGZ7 zBIi@!?b7Or6DLpZ>}crfArf4l~O;$zjSbkp>uelLq>cX#*pmXrhs+uBMi3p@E(ywgBe zjiXq(d99%ke6YZ7R$UYR><4NHs#$&Yi#Ca7>ZQf zh+9gRl` zNh~TV0!S$+DBx6a1Ofq{&(F=xH8LV_xmFEIVsi~0f+%jL$9u` zLJPv?JUoFnFJG#wGn8wTmzS3TdFBBKg=I@iODbh5a37!!)Vb<#2No9>p&FnH=I7^U zXJ%cRLDjsAP4}`!PL}LTibZ!Mq3SyT4m+=!B>O5y}h{r6~@M$ot^FN?Y#hl zC{!YqO1H65P`C(Cib4@io^-%qT%t%M_l+BG-MTe5CliT8B_$<7p%9>{u&}TmAU{8U z1|TmluLOX{<7sN{%E`&Oe*OBjYY0DXW@ctaMn-ITY-&boT3T94N(x;~Eh#A}At?a~ zCX*Q-AAhR#RBUW)baZrNWMo7{L_R=RSXgL8Xnb&RXlQ5(VwZBPQ=XGwpr60LKYWFw z`A2N+eLT=&d$z1 ze*A!+zAFx=Qm40Uad2>eW-t#nmzV#B$CKe6KrO=fr+_k<49bCn!|~0{0XZlSAO|KU zCg3VarBb*8IU6>}$%O|Jhya1EuGE2nfw8f70F3VL?(N$#dU}ZTL@bux($X?BHikx@ zMxn?6>n$vn+TI5>$O^e=4_7?cei{z`Irux-V7&^JWYHn|XJb{) ztaW8aFz!G>3$xX@Xyx4VhMGi|@Z{yRAy3~u3T{Dzq05Alkb8H9K1P4F-hT3g)m9Nh z8VDfQoBpwyH`740DZKl)ulN4y*5D>vW}_t6!m7uTdPs~i<_W0O@toO~X~vAfo$~kX z?99fT_mqZ2GV8Z9;>{}~Uxu_<#PH|mLqdkkUKd+?dv$CItbLO(X?+IM&%D`Wc7tc( zCSF9>rsLiwKlI~HSa@$u_-AGM;JxVT&UitaVZY^ZlI8v>p0qxM*^Cbq*ovReoy54y zqc@kKDo@y7XjB(I?dj`Amo?MtZokTNvI#Y7Yg4ikp(^za=H6PR`vz8+;AjI^J7#Fj ze936To%SmgyKal5=cgBHdMc+%aN}M5FB+rM?@v-1Ngeni3qNspgRGNZ?7C+sXI%1X zu&@5<%1FnPY{|sA&399jf*Ki-lC51XeTCyzc{m1!Hy?E|SK;2qE86{)*9AoayT6^+}UtG~L-LQ!_uNscFG7wOc+;n55 zi%O5BBNH<3FJF{p3sXbkmhU1SHR+V;^14{}iC_7{%m7S+(d!q3rCSucFC8q?ub!ax zF755m+JV|^+;sBNR8-&ZOS{mH!F^^e!qemf2F)+O1xWD<6~CxV>WZY3AMK7S*J*`G zI`+z}Og|)wnBLFIM>MEg;`+lGIzxVxozicm0XHC>L6aZ+tx?p_}HCXEn zD#*m%$mv8xm4flWfKsN!VyxgCfbvH#cVDN~)zxGIp`qbnm7`-xNlC4N0Y^`-xVU)x zc4ARc5kUI2YuC7yT%k}X5D4<~^G!_&JRT3Ah|A@21RQho%G})CWB?9_(+I$3vo$mZ z=y7pbSy=#e85tQj0b~FvDJhpOT>=oZSS)~U27{51kZ|Y_fkvan#l^+M#JE(uTtQA! z4gv@uunBwiF!3Bbo6V(AD8a$Oqzfe7&$^k$#*t_=mWTEC_dim61k1+S<=X+=fH{C~ zKqL}Ro;-Qt#0fkeZLZKPnzIvst%}~3mwzRYa$TJT>Br088T+}GlfcpTopv}{U+b}yj3)KLXFf%hV zH8ll7n3$LVph7M}0YLze1r`<-`ub+;*E{Iw)TpV=^uO-!?d{D6C^s|f?CflBZ|?=@ zN1;-vRJy&ripm9m5)_JX?3fD%;}Jt5d9PnzRaG@Tt&m70VzF2x5&<+`zkaOg!FtJU%`?Ha0doIyx#Ust_O|A|gC0JTW9BJUl!diAx#Qt-#Gc$Uh(;0OsLv z;o&o9&YV7d8onR~ksRrc1Ofrzt2y7?In>$0f((P;Ljpax;QW}rf$fHL6XZ~`kUKn^MZ$b-?* zQMe3pxg3%q@0VYclp=!&M1UYqPikLZ-^j=Z07iFr_m(XfLqo)RA{I+;X=#}p89}3c zQ7AINY72|Cx(f1<1BfS}6zk)O2Zt|%A!|#3n=^L7>E-reBy>5hSd8!C+(5GA0R5|( zCU?rNq9X*i?^+A9)vRdw?6dm2DISq&OPK>F&h1k13hobIB8bE8-4UHJ{j2p>b2F>0 zJdV^CNUpQ^W2IoSo@jsl&fn+!_ExusG&(RFWck*%JvP(>Qj{5ANTt5dn`)V0Od8)V z``FITX~_FXsZSxZemf;qUmltp&}R`NpM{2n4OqS@w(~pLu_37DZPJ+CDa;Gz%|^=` zd}}Z1EV?EO_b%I<>>cOJ>%y2#_#mN!^x5<= zjJGmcy%bg9Z>un%{403Uo~AEOp-q|0FAO&Q_payLN^pd^v$8v; z_2>K%L+MXinj+%k=b2%{MBZdz?a#ncO7`Gc#`N2t?P<&Y2}MhElSclGW+d9ySV&Fv zGKiPYu6ryW8ddns&8aEAjSocHe299~xUJNH-^IF5oEHo-12IXaZ(jD7Y*g*OxWCk> zdX(C`xVuAdD@xt0@z}-jnCHJQ?m)YSJhyBS`I7e;H@#X2l;c&(f7KW>kjTeAJ04Z5 z)r*jI>{i%Xd`gip{hpQ$=}bQ!O lGajP1^htlK&dv|QE>+O1S>+WAhFg({f~%7!w#Jd1`acy)otOXs literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp0n0g08.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp0n0g08.png new file mode 100644 index 0000000000000000000000000000000000000000..333465fcdc9f10f7f25b2d999b558f5421983ecc GIT binary patch literal 719 zcmV;=0xe{x-64Dw5ISbDJfGPNXYF1fsnx~?7~M3eMD*m6rOMo0;2$rUW>-c(^**S*Ycd0zuX+u!1|S9WB+#F78QX<>lo? ziQz$h-hRnIWoQ!H=elq>2fX`s$g4Md}>$Ugu1e*ygBpcmqZ3DNb_5HNEsBtg8Fz$MsRgsRcUEt!R)#7 z@*=Hdg|%Ijgaqfp6x>M8@W|(*DezA>78ATBV zGiJ?6^pq7`pj8TmNNXtGQ7M(fr#kNOGpUKtO+a# zE}lAlTDXoRkAt?j2v0jgK~H>oU`AO)UQprWsr_L}qI~YALPA1E5ej}SPEJnGOv?!@ zojAEOR7Ob9QdC4?8%mP9keiy8ksVOlKd~`Xk)KCEK=mA2ntaoimYx|<+}mFjqR+?8 zZTJ8q(f(PLp6*}V-CGiDD=qBv7F)8vQWR0&(VZLQZ(jZjd%k$Tpt-FhJuqOwUu^jT z1pXapZA%Q=jx2U BP!RwC literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp0n2c08.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp0n2c08.png new file mode 100644 index 0000000000000000000000000000000000000000..fc6e42cb420fd08ecd78340256157fa5f8a22934 GIT binary patch literal 1594 zcmV-A2F3Y_P)u542F>)wJ;-zU<0Ta5X4X^rIbM; zBH-v?$kU01p_ErCl=u4~L7fbz&H-~9!(}3aFu`RZW&unzb50QkgK2zirzKlPEQpyV zJ88Z&UwhB*+;h+QpNot)Z1^7mZr{G$*Vi{SHT9YSckkY9Z*NaePmhd@j0*@zcXT}E z>DjB%+#enNPk@PuiSF+1yu7^V=xBLZ*b!IPd^0mOpafEZETD#AngxPxg<^DQ=;_m^ zO9f0%PhYumrM$d6AtB*?xjc2}&YX4Y${D5+CG4W_vSdOD(DVN&-oB_@QeZU}a320`R0!vG! zgF}Y7c_vT+6ajLvI4&-Z7Si(C+FA;c5-<-iFfc$*`Z-x=6;4i{1D^pMz*&|p+q$(x zB)Vj4J8WQZ3z!6c0e;dUzW@{rLwimBm&L@yP^|L+BO@b9r7|}+H!CYEEiFwM7}#lU ze#Y8b?eBj$IXU%j%aqGow{IV|u^C^v@>iA}GBZ1AZ=V(%{LdfavLmWItxn1d>CixU>w z(z&H&q%@~cmeiGMuLdu#(_V!Qg$)f2b#--gLIj|kgoK1hr6FtAeh>TxG#MD|V;DCe z+}c_;JUpxi(9+VfzG^*Mf$y{cVZV^}t ze*#wx4d1b}e2ZmQv#dlY6hC?LL=T{&qk~_>M>ADEa39m2fL{qvo7rko-xdG82;t3ZKJ~Z{8fjKg!o$ON?8wlCe~HHnv#{{d1tq7Cl~vHp z%#3~jNv`NUkyhKvAxIVA8=wbFDWm}$)k06v92)E2}b{Rj#QTCt*&@?&Ti zD zl4Z+2B9B~dgtK!fhf@n&;PLjfw||-Og6SEVLqkKcv9UCP1w{gUs+$RUkfbMoF`VR)x@ASCQaVB z(Z|4m%7&5?v0+2f&6_{#^|K%#LswL-t*u(|pn;hUX^xb{ju_O&VzJoG&5g&iH8u70 z_D*>4U~(ZRivi~B`tWs^S{JHXMW%x09Wf|-G_d^r{kLq{LV`-iwz!9v--{+ECrRLF z@=(%OV07*qoM6N<$f`h#14gdfE literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp0n3p08.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp0n3p08.png new file mode 100644 index 0000000000000000000000000000000000000000..69a69e5872234d96cab4cbb017a0933fbfedba81 GIT binary patch literal 1476 zcmWlXc~H^`6vv-Om}J3dn5OOMOgg5aIm=3#R_~R8*9gm+#ueDlIJqsFg@0;tH{|b8}HqQ5Jw$Ebasl zi9{wQqx{s={QP`?_T1du%K+m5+1c6W&Yc6O&&;#KYi za0xyG{0*U@p&=n5OeT{~rxS7s!NI{ht9Awk26}jqu-LA432IQH$P*->1%a<=E7fhf7KmpiNEL?|$g$1|@ z&=;ZU0fm$KWEP7BFz+mN_CD$D>KXyBfJUPQ1qHz$U@Noz`t>V3 z0Y5*#_4Rf5=AAr|%l))v3zbTRZXmD;`udA>dIa18XhRr(3s9%iK@&&<11kswKn|(| zCKfuzi4TRu*jp4GWDgcp#{666_U|?<$;@lL6fyrT=v@~MF43;U zZ$6b_)kkb?TQRlFx@L1DFHuvCdiGRV@qSb5o3SyX=dqWIo~SD}lgtU8-0hinIc|l^ zwZpyIy{+Kp3qku~jyuQS{wOJTffqk}ylg!rGf@@8WYp~qRTEe@i_6M#f}U2WR@4MfM)1HJRjPCMx~ z7uM(-p3*y>&A)fhi1A3;cS(L+J1;&pqWL&it>CX0-+eBqO{=g-lKzNGvG(`sNqtRF zeg3%mDzvL|F3Eho_0DyETn8H%dc!?dA!#0>Q=Vr9#{-Ga&|1#6CAW+Q0sfY$`N-&; z^0c=#@%4)8jy6X3lL6u3JAW=?c#tm>K2a$#(Q?|Uz}T^+pWADD@MB|q8>&Xr948aj zsY1|Z7&ad@u4wr4W%TE{WS7U&Rh^yI#(OsCtq$vQ3|A*M_uLm%-A~M)I@BiVUyS#YR$&g!`CNx58tIE z|3D@=NLJY$Q%;J12ZU?1w#&^2c5EzDN05DZLoa2szJ*SEwwg0|Mem<$Yn1cWcz^cq z-}lxrB6iz%k1R&3=>`|KS%};k)l(YskH!jI!g#-(&O>3hx)5(GX8X3fe_&q16?&Zr z)72bEymR&OySDOI3mZ0C3tSEiO=8X3u^BG}uBukDWrMyZ$LQ%Y4sr7@il=hRi%!IK N0G~qvls0mN@PBi2fm#3n literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp1n3p08.png b/src/SDL2/external/libpng-1.6.2/contrib/pngsuite/ftp1n3p08.png new file mode 100644 index 0000000000000000000000000000000000000000..a6c9f35a86271c056e955f637a8769381eb03827 GIT binary patch literal 1483 zcmWlXdpOez7{_0ijw~Xj6ZLfH5mEEBP|@KrEtkTuS}m>SI;>1?8{6D(v$V!$$}kk^ z;zXQM92O%H=ShmnbXw(ZQ8_r3^Xq+{_x=9)zVGMz<@$KL>7tBL0HEvPj`Ks*k)Uu?Q@xn6z>Z3lMM-Q#6tfUZ$jg9xOySS8oYSdsZ?58S}Ku90Gh5`xl#{MR8%wt zP*_-43Lq2;*RS7_pPzr}(xrd%E)}>Vg+~H{0|EmB;S209 z+JEZQsgoy9!bij)vJ2CNNF)M$vKCsqg}Grc6c_?OKR+KIALs+qBGU~U&cS2w^z{7x z{X6{3T?w5=n_Ror-Q69U!8X)ZUHvP8K!G~|wFu*%2C7slr~p15FS4}-9)W zgA1TkDj@~(fB8jCjUG%S0R(${)B5}SM@HTPu)4duH*Un5nj+Sda5!dbYwOg=2pWA9 zg`xngv~oCl+wa{*R;b1Lc@x0-<4`CPvRn@w_UQh+Ac}Mk^OKb>f7-E19*W;}xs}~! zRlIciNyF__FM9f7*5I)-+cbPa1|k-TrQvsONlsb*)pnz$h0|UcNA3@z)MNfwE}Uv0 zIbFH+_Zk14HEp3y&g@1-ft^E-J#CK+WhE5TXruYlt&^-N^P3g#I=H!w`R}L=sT9s{ zCuD1uhCdG)aY*zhVd3F}HZMyY{g2C62iLwz8h1Q_?PFhSvbid>^O4P?YqRlh((eZd z#_aspCH=EBx%*CRO=qIG-J;L_AlZKBgiu)@&Tb|Ii=AapW?Zqp>gYA)sH#J5XB+h; zk9wYVqsyC_bvIrV9&w7WX>VWUAVpP~na{j&$UYNXX^m&}Uyx5RnnjA&4L3VdD!1H_ zD#Iq{ZueA8l;TIb`kpn$X5SsBHj?FpV!HrYcY~@^RN}pDGk;X^V&G~0qorYaOP*rv z^qN~4t3n!C(Ta6lUVkRto3S5$_!4xZm;=Uxwl-UlXk<^TD! zwrXx-kZ%7r>OqrnxrwlgbC>i*G{g?VCRx6GHc+-!v-|w+aMq(Z)3<$!sgDrNgW zt{66;txYft&kQV}Qtm74k`-qO{C2WMU5|#0wUn?oyC~|ghKx56YPk5`Xp_O#x8g2M X(5+n&l!#upArS?SL*BSr7fRay;V71Q literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/tools/README.txt b/src/SDL2/external/libpng-1.6.2/contrib/tools/README.txt new file mode 100644 index 000000000..5ddae02ce --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/tools/README.txt @@ -0,0 +1,26 @@ +This directory (contrib/tools) contains tools used by the authors of libpng. + +Code and data placed in this directory is not required to build libpng, +however the code in this directory has been used to generate data or code in +the body of the libpng source. The source code identifies where this has +been done. Code in this directory may not compile on all operating systems +that libpng supports. + +NO COPYRIGHT RIGHTS ARE CLAIMED TO ANY OF THE FILES IN THIS DIRECTORY. + +To the extent possible under law, the authors have waived all copyright and +related or neighboring rights to this work. This work is published from: +United States. + +The files may be used freely in any way. + +The source code and comments in this directory are the original work of the +people named below. No other person or organization has made contributions to +the work in this directory. + +ORIGINAL AUTHORS + The following people have contributed to the code in this directory. None + of the people below claim any rights with regard to the contents of this + directory. + + John Bowler diff --git a/src/SDL2/external/libpng-1.6.2/contrib/tools/checksum-icc.c b/src/SDL2/external/libpng-1.6.2/contrib/tools/checksum-icc.c new file mode 100644 index 000000000..581e7088a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/tools/checksum-icc.c @@ -0,0 +1,102 @@ +/* checksum-icc.c + * + * Copyright (c) 2013 John Cunningham Bowler + * + * Last changed in libpng 1.6.0 [February 14, 2013] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Generate crc32 and adler32 checksums of the given input files, used to + * generate check-codes for use when matching ICC profiles within libpng. + */ +#include + +#include + +static int +read_one_file(FILE *ip, const char *name) +{ + uLong length = 0; + uLong a32 = adler32(0, NULL, 0); + uLong c32 = crc32(0, NULL, 0); + Byte header[132]; + + for (;;) + { + int ch = getc(ip); + Byte b; + + if (ch == EOF) break; + + b = (Byte)ch; + + if (length < sizeof header) + header[length] = b; + + ++length; + a32 = adler32(a32, &b, 1); + c32 = crc32(c32, &b, 1); + } + + if (ferror(ip)) + return 0; + + /* Success */ + printf("PNG_ICC_CHECKSUM(0x%8.8lx, 0x%8.8lx,\n PNG_MD5(" + "0x%2.2x%2.2x%2.2x%2.2x, 0x%2.2x%2.2x%2.2x%2.2x, 0x%2.2x%2.2x%2.2x%2.2x," + " 0x%2.2x%2.2x%2.2x%2.2x), %d,\n" + " \"%4.4d/%2.2d/%2.2d %2.2d:%2.2d:%2.2d\", %lu, \"%s\")\n", + (unsigned long)a32, (unsigned long)c32, + header[84], header[85], header[86], header[87], + header[88], header[89], header[90], header[91], + header[92], header[93], header[94], header[95], + header[96], header[97], header[98], header[99], +# define u16(x) (header[x] * 256 + header[x+1]) +# define u32(x) (u16(x) * 65536 + u16(x+2)) + u32(64), u16(24), u16(26), u16(28), u16(30), u16(32), u16(34), + (unsigned long)length, name); + + return 1; +} + +int main(int argc, char **argv) +{ + int err = 0; + + printf("/* adler32, crc32, MD5[16], intent, date, length, file-name */\n"); + + if (argc > 1) + { + int i; + + for (i=1; i&0 4>&1 5>&2 + else + echo "chkfmt -e: EDITOR must be defined" >&2 + exit 1 + fi +} + +# Function to edit a single file - if the file isn't changed ask the user +# whether or not to continue. This stuff only works if the script is run from +# the command line (otherwise, don't specify -e or you will be sorry). +doed(){ + cp "$file" "$file".orig + "$EDITOR" "$file" 0>&3 1>&4 2>&5 3>&- 4>&- 5>&- || exit 1 + if cmp -s "$file".orig "$file" + then + rm "$file".orig + echo -n "$file: file not changed, type anything to continue: " >&5 + read ans 0>&3 + test -n "$ans" || return 1 + fi + return 0 +} + +# In beta versions the version string which appears in files can be a little +# long and cause spuriously overlong lines. To avoid this subtitute the version +# string with a 'standard' version a.b.cc before checking for long lines. +if test -r png.h +then + vers="`sed -n -e \ + 's/^#define PNG_LIBPNG_VER_STRING .\([0-9]\.[0-9]\.[0-9][0-9a-z]*\).$/\1/p' \ + png.h`" + echo "chkfmt: checking version $vers" +fi +if test -z "$vers" +then + echo "chkfmt: png.h not found, ignoring version number" >&2 +fi + +test -n "$1" || set -- . +find "$@" \( -type d \( -name '.git' -o -name '.libs' -o -name 'projects' \) \ + -prune \) -o \( -type f \ + ! -name '*.[oa]' ! -name '*.l[oa]' ! -name '*.png' ! -name '*.out' \ + ! -name '*.jpg' ! -name '*.patch' ! -name '*.obj' ! -name '*.exe' \ + ! -name '*.com' ! -name '*.tar.*' ! -name '*.zip' ! -name '*.ico' \ + ! -name '*.res' ! -name '*.rc' ! -name '*.mms' ! -name '*.rej' \ + ! -name '*.dsp' ! -name '*.orig' ! -name '*.dfn' ! -name '*.swp' \ + ! -name '~*' ! -name '*.3' \ + ! -name 'missing' ! -name 'mkinstalldirs' ! -name 'depcomp' \ + ! -name 'aclocal.m4' ! -name 'install-sh' ! -name 'Makefile.in' \ + ! -name 'ltmain.sh' ! -name 'config*' -print \) | { + st=0 + while read file + do + case "$file" in + *.mak|*[Mm]akefile.*|*[Mm]akefile) + # Makefiles require tabs, dependency lines can be this long. + check_tabs= + line_length=100;; + *.awk) + # Includes literal tabs + check_tabs= + # The following is arbitrary + line_length=132;; + *contrib/*/*.[ch]) + check_tabs=yes + line_length=96;; + *) + check_tabs=yes + line_length=80;; + esac + + # Note that vers can only contain 0-9, . and a-z + if test -n "$vers" + then + sed -e "s/$vers/a.b.cc/g" "$file" >"$file".$$ + else + cp "$file" "$file".$$ + fi + splt="`fold -$line_length "$file".$$ | diff -c "$file".$$ -`" + rm "$file".$$ + + if test -n "$splt" + then + echo "$file: lines too long" + st=1 + if test -n "$EDITOR" -a -n "$edit" + then + doed "$file" || exit 1 + elif test -n "$verbose" + then + echo "$splt" + fi + fi + if test -n "$check_tabs" + then + tab="`tr -c -d '\t' <"$file"`" + if test -n "$tab" + then + echo "$file: file contains tab characters" + st=1 + if test -n "$EDITOR" -a -n "$edit" + then + doed "$file" || exit 1 + elif test -n "$verbose" + then + echo "$splt" + fi + fi + fi + done + exit $st +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/tools/cvtcolor.c b/src/SDL2/external/libpng-1.6.2/contrib/tools/cvtcolor.c new file mode 100644 index 000000000..e6793c7d5 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/tools/cvtcolor.c @@ -0,0 +1,188 @@ +/*- + * convert.c + * + * Last changed in libpng 1.6.0 [February 14, 2013] + * + * COPYRIGHT: Written by John Cunningham Bowler, 2013. + * To the extent possible under law, the author has waived all copyright and + * related or neighboring rights to this work. This work is published from: + * United States. + * + * Convert 8-bit sRGB or 16-bit linear values to another format. + */ +#define _ISOC99_SOURCE 1 + +#include +#include +#include +#include + +#include + +#include "sRGB.h" + +static void +usage(const char *prog) +{ + fprintf(stderr, + "%s: usage: %s [-linear|-sRGB] [-gray|-color] component{1,4}\n", + prog, prog); + exit(1); +} + +unsigned long +component(const char *prog, const char *arg, int issRGB) +{ + char *ep; + unsigned long c = strtoul(arg, &ep, 0); + + if (ep <= arg || *ep || c > 65535 || (issRGB && c > 255)) + { + fprintf(stderr, "%s: %s: invalid component value (%lu)\n", prog, arg, c); + usage(prog); + } + + return c; +} + +int +main(int argc, const char **argv) +{ + const char *prog = *argv++; + int to_linear = 0, to_gray = 0, to_color = 0; + int channels = 0; + double c[4]; + + /* FE_TONEAREST is the IEEE754 round to nearest, preferring even, mode; i.e. + * everything rounds to the nearest value except that '.5' rounds to the + * nearest even value. + */ + fesetround(FE_TONEAREST); + + c[3] = c[2] = c[1] = c[0] = 0; + + while (--argc > 0 && **argv == '-') + { + const char *arg = 1+*argv++; + + if (strcmp(arg, "sRGB") == 0) + to_linear = 0; + + else if (strcmp(arg, "linear") == 0) + to_linear = 1; + + else if (strcmp(arg, "gray") == 0) + to_gray = 1, to_color = 0; + + else if (strcmp(arg, "color") == 0) + to_gray = 0, to_color = 1; + + else + usage(prog); + } + + switch (argc) + { + default: + usage(prog); + break; + + case 4: + c[3] = component(prog, argv[3], to_linear); + ++channels; + case 3: + c[2] = component(prog, argv[2], to_linear); + ++channels; + case 2: + c[1] = component(prog, argv[1], to_linear); + ++channels; + case 1: + c[0] = component(prog, argv[0], to_linear); + ++channels; + break; + } + + if (to_linear) + { + int i; + int components = channels; + + if ((components & 1) == 0) + --components; + + for (i=0; i 0) + for (i=0; i 2) + { + fprintf(stderr, "%s: too many channels (%d) for -color\n", + prog, channels); + usage(prog); + } + + c[3] = c[1]; /* alpha, if present */ + c[2] = c[1] = c[0]; + } + + if (to_linear) + { + int i; + if ((channels & 1) == 0) + { + double alpha = c[channels-1]; + for (i=0; i= 0) + c[i] = sRGB_from_linear(c[i]); + + for (i=0; i + +/* fixitxt version 1.0.0 + * + * Copyright 2013 Glenn Randers-Pehrson + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Usage: + * + * fixitxt.exe < bad.png > good.png + * + * Fixes a PNG file written with libpng-1.6.0 or 1.6.1 that has one or more + * uncompressed iTXt chunks. Assumes that the actual length is greater + * than or equal to the value in the length byte, and that the CRC is + * correct for the actual length. This program hunts for the CRC and + * adjusts the length byte accordingly. It is not an error to process a + * PNG file that has no iTXt chunks or one that has valid iTXt chunks; + * such files will simply be copied. + * + * Requires zlib (for crc32 and Z_NULL); build with + * + * gcc -O -o fixitxt fixitxt.c -lz + */ + +#define MAX_LENGTH 500000 + +#define GETBREAK c=getchar(); if (c == EOF) break; +#include + +main() +{ + unsigned int i; + unsigned char buf[MAX_LENGTH]; + unsigned long crc; + unsigned int c; + +/* Skip 8-byte signature */ + for (i=8; i; i--) + { + c=GETBREAK; + putchar(c); + } + +if (c != EOF) +for (;;) + { + /* Read the length */ + unsigned long length; + c=GETBREAK; buf[0] = c; + c=GETBREAK; buf[1] = c; + c=GETBREAK; buf[2] = c; + c=GETBREAK; buf[3] = c; + + length=((((unsigned long) buf[0]<<8 + buf[1]<<16) + buf[2] << 8) + buf[3]); + /* Read the chunkname */ + c=GETBREAK; buf[4] = c; + c=GETBREAK; buf[5] = c; + c=GETBREAK; buf[6] = c; + c=GETBREAK; buf[7] = c; + + + /* The iTXt chunk type expressed as integers is (105, 84, 88, 116) */ + if (buf[4] == 105 && buf[5] == 84 && buf[6] == 88 && buf[7] == 116) + { + if (length >= MAX_LENGTH-12) + break; /* To do: handle this more gracefully */ + + /* Initialize the CRC */ + crc = crc32(0, Z_NULL, 0); + + /* Copy the data bytes */ + for (i=8; i < length + 12; i++) + { + c=GETBREAK; buf[i] = c; + } + + /* Calculate the CRC */ + crc = crc32(crc, buf+4, (uInt)length+4); + + for (;;) + { + /* Check the CRC */ + if (((crc >> 24) & 0xff) == buf[length+8] && + ((crc >> 16) & 0xff) == buf[length+9] && + ((crc >> 8) & 0xff) == buf[length+10] && + ((crc ) & 0xff) == buf[length+11]) + break; + + length++; + + if (length >= MAX_LENGTH-12) + break; + + c=GETBREAK; + buf[length+11]=c; + + /* Update the CRC */ + crc = crc32(crc, buf+7+length, 1); + } + + /* Update length bytes */ + buf[0] = (length << 24) & 0xff; + buf[1] = (length << 16) & 0xff; + buf[2] = (length << 8) & 0xff; + buf[3] = (length ) & 0xff; + + /* Write the fixed iTXt chunk (length, name, data, crc) */ + for (i=0; i= 80) { + print str "," + str = " " $0 "U" + } else + str = t + } + END{ + print str + }' +} +# +# The logarithm table. +cat <= 2^32) x = 2^32-1; + x; +} +END +echo '};' +echo +# +# And the table of adjustment values. +cat <=0;--i){ + (1 - e(-(2^i)/65536*l(2))) * 2^(32-i) +} +END +echo '#endif' diff --git a/src/SDL2/external/libpng-1.6.2/contrib/tools/makesRGB.c b/src/SDL2/external/libpng-1.6.2/contrib/tools/makesRGB.c new file mode 100644 index 000000000..e66c9f157 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/tools/makesRGB.c @@ -0,0 +1,430 @@ +/* makesRGB.c -- build sRGB-to-linear and linear-to-sRGB conversion tables + * + * Last changed in libpng 1.6.0 [February 14, 2013] + * + * COPYRIGHT: Written by John Cunningham Bowler, 2013. + * To the extent possible under law, the author has waived all copyright and + * related or neighboring rights to this work. This work is published from: + * United States. + * + * Make a table to convert 8-bit sRGB encoding values into the closest 16-bit + * linear value. + * + * Make two tables to take a linear value scaled to 255*65535 and return an + * approximation to the 8-bit sRGB encoded value. Calculate the error in these + * tables and display it. + */ +#define _C99_SOURCE 1 +#include +#include +#include + +/* pngpriv.h includes the definition of 'PNG_sRGB_FROM_LINEAR' which is required + * to verify the actual code. + */ +#include "../../pngpriv.h" + +#include "sRGB.h" + +/* The tables are declared 'const' in pngpriv.h, so this redefines the tables to + * be used. + */ +#define png_sRGB_table sRGB_table +#define png_sRGB_base sRGB_base +#define png_sRGB_delta sRGB_delta + +static png_uint_16 png_sRGB_table[256]; +static png_uint_16 png_sRGB_base[512]; +static png_byte png_sRGB_delta[512]; + +static const unsigned int max_input = 255*65535; + +double +fsRGB(double l) +{ + return sRGB_from_linear(l/max_input); +} + +double +sRGB(unsigned int i) +{ + return fsRGB(i); +} + +double +finvsRGB(unsigned int i) +{ + return 65535 * linear_from_sRGB(i/255.); +} + +png_uint_16 +invsRGB(unsigned int i) +{ + unsigned int x = nearbyint(finvsRGB(i)); + + if (x > 65535) + { + fprintf(stderr, "invsRGB(%u) overflows to %u\n", i, x); + exit(1); + } + + return (png_uint_16)x; +} + +int +main(int argc, char **argv) +{ + unsigned int i, i16, ibase; + double min_error = 0; + double max_error = 0; + double min_error16 = 0; + double max_error16 = 0; + double adjust; + double adjust_lo = 0.4, adjust_hi = 0.6, adjust_mid = 0.5; + unsigned int ec_lo = 0, ec_hi = 0, ec_mid = 0; + unsigned int error_count = 0; + unsigned int error_count16 = 0; + int test_only = 0; + + if (argc > 1) + test_only = strcmp("--test", argv[1]) == 0; + + /* Initialize the encoding table first. */ + for (i=0; i<256; ++i) + { + png_sRGB_table[i] = invsRGB(i); + } + + /* Now work out the decoding tables (this is where the error comes in because + * there are 512 set points and 512 straight lines between them.) + */ + for (;;) + { + if (ec_lo == 0) + adjust = adjust_lo; + + else if (ec_hi == 0) + adjust = adjust_hi; + + else if (ec_mid == 0) + adjust = adjust_mid; + + else if (ec_mid < ec_hi) + adjust = (adjust_mid + adjust_hi)/2; + + else if (ec_mid < ec_lo) + adjust = (adjust_mid + adjust_lo)/2; + + else + { + fprintf(stderr, "not reached: %u .. %u .. %u\n", ec_lo, ec_mid, ec_hi); + exit(1); + } + + /* Calculate the table using the current 'adjust' */ + for (i=0; i<=511; ++i) + { + double lo = 255 * sRGB(i << 15); + double hi = 255 * sRGB((i+1) << 15); + unsigned int calc; + + calc = nearbyint((lo+adjust) * 256); + if (calc > 65535) + { + fprintf(stderr, "table[%d][0]: overflow %08x (%d)\n", i, calc, + calc); + exit(1); + } + png_sRGB_base[i] = calc; + + calc = nearbyint((hi-lo) * 32); + if (calc > 255) + { + fprintf(stderr, "table[%d][1]: overflow %08x (%d)\n", i, calc, + calc); + exit(1); + } + png_sRGB_delta[i] = calc; + } + + /* Check the 16-bit linear values alone: */ + error_count16 = 0; + for (i16=0; i16 <= 65535; ++i16) + { + unsigned int i = 255*i16; + unsigned int iexact = nearbyint(255*sRGB(i)); + unsigned int icalc = PNG_sRGB_FROM_LINEAR(i); + + if (icalc != iexact) + ++error_count16; + } + + /* Now try changing the adjustment. */ + if (ec_lo == 0) + ec_lo = error_count16; + + else if (ec_hi == 0) + ec_hi = error_count16; + + else if (ec_mid == 0) + { + ec_mid = error_count16; + printf("/* initial error counts: %u .. %u .. %u */\n", ec_lo, ec_mid, + ec_hi); + } + + else if (error_count16 < ec_mid) + { + printf("/* adjust (mid ): %f: %u -> %u */\n", adjust, ec_mid, + error_count16); + ec_mid = error_count16; + adjust_mid = adjust; + } + + else if (adjust < adjust_mid && error_count16 < ec_lo) + { + printf("/* adjust (low ): %f: %u -> %u */\n", adjust, ec_lo, + error_count16); + ec_lo = error_count16; + adjust_lo = adjust; + } + + else if (adjust > adjust_mid && error_count16 < ec_hi) + { + printf("/* adjust (high): %f: %u -> %u */\n", adjust, ec_hi, + error_count16); + ec_hi = error_count16; + adjust_hi = adjust; + } + + else + { + adjust = adjust_mid; + printf("/* adjust: %f: %u */\n", adjust, ec_mid); + break; + } + } + + /* For each entry in the table try to adjust it to minimize the error count + * in that entry. Each entry corresponds to 128 input values. + */ + for (ibase=0; ibase<65536; ibase+=128) + { + png_uint_16 base = png_sRGB_base[ibase >> 7], trybase = base, ob=base; + png_byte delta = png_sRGB_delta[ibase >> 7], trydelta = delta, od=delta; + unsigned int ecbase = 0, eco; + + for (;;) + { + png_sRGB_base[ibase >> 7] = trybase; + png_sRGB_delta[ibase >> 7] = trydelta; + + /* Check the 16-bit linear values alone: */ + error_count16 = 0; + for (i16=ibase; i16 < ibase+128; ++i16) + { + unsigned int i = 255*i16; + unsigned int iexact = nearbyint(255*sRGB(i)); + unsigned int icalc = PNG_sRGB_FROM_LINEAR(i); + + if (icalc != iexact) + ++error_count16; + } + + if (error_count16 == 0) + break; + + if (ecbase == 0) + { + eco = ecbase = error_count16; + ++trybase; /* First test */ + } + + else if (error_count16 < ecbase) + { + if (trybase > base) + { + base = trybase; + ++trybase; + } + else if (trybase < base) + { + base = trybase; + --trybase; + } + else if (trydelta > delta) + { + delta = trydelta; + ++trydelta; + } + else if (trydelta < delta) + { + delta = trydelta; + --trydelta; + } + else + { + fprintf(stderr, "makesRGB: impossible\n"); + exit(1); + } + ecbase = error_count16; + } + + else + { + if (trybase > base) + trybase = base-1; + else if (trybase < base) + { + trybase = base; + ++trydelta; + } + else if (trydelta > delta) + trydelta = delta-1; + else if (trydelta < delta) + break; /* end of tests */ + } + } + + png_sRGB_base[ibase >> 7] = base; + png_sRGB_delta[ibase >> 7] = delta; + if (base != ob || delta != od) + { + printf("/* table[%u]={%u,%u} -> {%u,%u} %u -> %u errors */\n", + ibase>>7, ob, od, base, delta, eco, ecbase); + } + else if (0) + printf("/* table[%u]={%u,%u} %u errors */\n", ibase>>7, ob, od, + ecbase); + } + + /* Only do the full (slow) test at the end: */ + min_error = -.4999; + max_error = .4999; + error_count = 0; + + for (i=0; i <= max_input; ++i) + { + unsigned int iexact = nearbyint(255*sRGB(i)); + unsigned int icalc = PNG_sRGB_FROM_LINEAR(i); + + if (icalc != iexact) + { + double err = 255*sRGB(i) - icalc; + + if (err > (max_error+.001) || err < (min_error-.001)) + { + printf( + "/* 0x%08x: exact: %3d, got: %3d [tables: %08x, %08x] (%f) */\n", + i, iexact, icalc, png_sRGB_base[i>>15], + png_sRGB_delta[i>>15], err); + } + + ++error_count; + if (err > max_error) + max_error = err; + else if (err < min_error) + min_error = err; + } + } + + /* Re-check the 16-bit cases too, including the warning if there is an error + * bigger than 1. + */ + error_count16 = 0; + max_error16 = 0; + min_error16 = 0; + for (i16=0; i16 <= 65535; ++i16) + { + unsigned int i = 255*i16; + unsigned int iexact = nearbyint(255*sRGB(i)); + unsigned int icalc = PNG_sRGB_FROM_LINEAR(i); + + if (icalc != iexact) + { + double err = 255*sRGB(i) - icalc; + + ++error_count16; + if (err > max_error16) + max_error16 = err; + else if (err < min_error16) + min_error16 = err; + + if (abs(icalc - iexact) > 1) + printf( + "/* 0x%04x: exact: %3d, got: %3d [tables: %08x, %08x] (%f) */\n", + i16, iexact, icalc, png_sRGB_base[i>>15], + png_sRGB_delta[i>>15], err); + } + } + + /* Check the round trip for each 8-bit sRGB value. */ + for (i16=0; i16 <= 255; ++i16) + { + unsigned int i = 255 * png_sRGB_table[i16]; + unsigned int iexact = nearbyint(255*sRGB(i)); + unsigned int icalc = PNG_sRGB_FROM_LINEAR(i); + + if (i16 != iexact) + { + fprintf(stderr, "8-bit rounding error: %d -> %d\n", i16, iexact); + exit(1); + } + + if (icalc != i16) + { + double finv = finvsRGB(i16); + + printf("/* 8-bit roundtrip error: %d -> %f -> %d(%f) */\n", + i16, finv, icalc, fsRGB(255*finv)); + } + } + + + printf("/* error: %g - %g, %u (%g%%) of readings inexact */\n", + min_error, max_error, error_count, (100.*error_count)/max_input); + printf("/* 16-bit error: %g - %g, %u (%g%%) of readings inexact */\n", + min_error16, max_error16, error_count16, (100.*error_count16)/65535); + + if (!test_only) + { + printf("PNG_CONST png_uint_16 png_sRGB_table[256] =\n{\n "); + for (i=0; i<255; ) + { + do + { + printf("%d,", png_sRGB_table[i++]); + } + while ((i & 0x7) != 0 && i<255); + if (i<255) printf("\n "); + } + printf("%d\n};\n\n", png_sRGB_table[i]); + + + printf("PNG_CONST png_uint_16 png_sRGB_base[512] =\n{\n "); + for (i=0; i<511; ) + { + do + { + printf("%d,", png_sRGB_base[i++]); + } + while ((i & 0x7) != 0 && i<511); + if (i<511) printf("\n "); + } + printf("%d\n};\n\n", png_sRGB_base[i]); + + printf("PNG_CONST png_byte png_sRGB_delta[512] =\n{\n "); + for (i=0; i<511; ) + { + do + { + printf("%d,", png_sRGB_delta[i++]); + } + while ((i & 0xf) != 0 && i<511); + if (i<511) printf("\n "); + } + printf("%d\n};\n\n", png_sRGB_delta[i]); + } + + return 0; +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/tools/sRGB.h b/src/SDL2/external/libpng-1.6.2/contrib/tools/sRGB.h new file mode 100644 index 000000000..22c8f7c0e --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/tools/sRGB.h @@ -0,0 +1,48 @@ +/*- + * sRGB.h + * + * Last changed in libpng 1.6.0 [February 14, 2013] + * + * COPYRIGHT: Written by John Cunningham Bowler, 2013. + * To the extent possible under law, the author has waived all copyright and + * related or neighboring rights to this work. This work is published from: + * United States. + * + * Utility file; not actually a header, this contains definitions of sRGB + * calculation functions for inclusion in those test programs that need them. + * + * All routines take and return a floating point value in the range + * 0 to 1.0, doing a calculation according to the sRGB specification + * (in fact the source of the numbers is the wikipedia article at + * http://en.wikipedia.org/wiki/SRGB). + */ +static double +sRGB_from_linear(double l) +{ + if (l <= 0.0031308) + l *= 12.92; + + else + l = 1.055 * pow(l, 1/2.4) - 0.055; + + return l; +} + +static double +linear_from_sRGB(double s) +{ + if (s <= 0.04045) + return s / 12.92; + + else + return pow((s+0.055)/1.055, 2.4); +} + +static double +YfromRGB(double r, double g, double b) +{ + /* Use the sRGB (rounded) coefficients for Rlinear, Glinear, Blinear to get + * the CIE Y value (also linear). + */ + return 0.2126 * r + 0.7152 * g + 0.0722 * b; +} diff --git a/src/SDL2/external/libpng-1.6.2/contrib/visupng/PngFile.c b/src/SDL2/external/libpng-1.6.2/contrib/visupng/PngFile.c new file mode 100644 index 000000000..dcde18a3a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/visupng/PngFile.c @@ -0,0 +1,451 @@ +/*------------------------------------- + * PNGFILE.C -- Image File Functions + *------------------------------------- + * + * Copyright 2000, Willem van Schaik. + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +#include +#include +#include +#include +#include + +#include "png.h" +#include "pngfile.h" +#include "cexcept.h" + +define_exception_type(const char *); +extern struct exception_context the_exception_context[1]; +struct exception_context the_exception_context[1]; +png_const_charp msg; + +static OPENFILENAME ofn; + +static png_structp png_ptr = NULL; +static png_infop info_ptr = NULL; + + +/* cexcept interface */ + +static void +png_cexcept_error(png_structp png_ptr, png_const_charp msg) +{ + if(png_ptr) + ; +#ifdef PNG_CONSOLE_IO_SUPPORTED + fprintf(stderr, "libpng error: %s\n", msg); +#endif + { + Throw msg; + } +} + +/* Windows open-file functions */ + +void PngFileInitialize (HWND hwnd) +{ + static TCHAR szFilter[] = TEXT ("PNG Files (*.PNG)\0*.png\0") + TEXT ("All Files (*.*)\0*.*\0\0"); + + ofn.lStructSize = sizeof (OPENFILENAME); + ofn.hwndOwner = hwnd; + ofn.hInstance = NULL; + ofn.lpstrFilter = szFilter; + ofn.lpstrCustomFilter = NULL; + ofn.nMaxCustFilter = 0; + ofn.nFilterIndex = 0; + ofn.lpstrFile = NULL; /* Set in Open and Close functions */ + ofn.nMaxFile = MAX_PATH; + ofn.lpstrFileTitle = NULL; /* Set in Open and Close functions */ + ofn.nMaxFileTitle = MAX_PATH; + ofn.lpstrInitialDir = NULL; + ofn.lpstrTitle = NULL; + ofn.Flags = 0; /* Set in Open and Close functions */ + ofn.nFileOffset = 0; + ofn.nFileExtension = 0; + ofn.lpstrDefExt = TEXT ("png"); + ofn.lCustData = 0; + ofn.lpfnHook = NULL; + ofn.lpTemplateName = NULL; +} + +BOOL PngFileOpenDlg (HWND hwnd, PTSTR pstrFileName, PTSTR pstrTitleName) +{ + ofn.hwndOwner = hwnd; + ofn.lpstrFile = pstrFileName; + ofn.lpstrFileTitle = pstrTitleName; + ofn.Flags = OFN_HIDEREADONLY; + + return GetOpenFileName (&ofn); +} + +BOOL PngFileSaveDlg (HWND hwnd, PTSTR pstrFileName, PTSTR pstrTitleName) +{ + ofn.hwndOwner = hwnd; + ofn.lpstrFile = pstrFileName; + ofn.lpstrFileTitle = pstrTitleName; + ofn.Flags = OFN_HIDEREADONLY | OFN_OVERWRITEPROMPT; + + return GetSaveFileName (&ofn); +} + +/* PNG image handler functions */ + +BOOL PngLoadImage (PTSTR pstrFileName, png_byte **ppbImageData, + int *piWidth, int *piHeight, int *piChannels, png_color *pBkgColor) +{ + static FILE *pfFile; + png_byte pbSig[8]; + int iBitDepth; + int iColorType; + double dGamma; + png_color_16 *pBackground; + png_uint_32 ulChannels; + png_uint_32 ulRowBytes; + png_byte *pbImageData = *ppbImageData; + static png_byte **ppbRowPointers = NULL; + int i; + + /* open the PNG input file */ + + if (!pstrFileName) + { + *ppbImageData = pbImageData = NULL; + return FALSE; + } + + if (!(pfFile = fopen(pstrFileName, "rb"))) + { + *ppbImageData = pbImageData = NULL; + return FALSE; + } + + /* first check the eight byte PNG signature */ + + fread(pbSig, 1, 8, pfFile); + if (png_sig_cmp(pbSig, 0, 8)) + { + *ppbImageData = pbImageData = NULL; + return FALSE; + } + + /* create the two png(-info) structures */ + + png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, NULL, + (png_error_ptr)png_cexcept_error, (png_error_ptr)NULL); + if (!png_ptr) + { + *ppbImageData = pbImageData = NULL; + return FALSE; + } + + info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) + { + png_destroy_read_struct(&png_ptr, NULL, NULL); + *ppbImageData = pbImageData = NULL; + return FALSE; + } + + Try + { + + /* initialize the png structure */ + +#ifdef PNG_STDIO_SUPPORTED + png_init_io(png_ptr, pfFile); +#else + png_set_read_fn(png_ptr, (png_voidp)pfFile, png_read_data); +#endif + + png_set_sig_bytes(png_ptr, 8); + + /* read all PNG info up to image data */ + + png_read_info(png_ptr, info_ptr); + + /* get width, height, bit-depth and color-type */ + + png_get_IHDR(png_ptr, info_ptr, piWidth, piHeight, &iBitDepth, + &iColorType, NULL, NULL, NULL); + + /* expand images of all color-type and bit-depth to 3x8-bit RGB */ + /* let the library process alpha, transparency, background, etc. */ + +#ifdef PNG_READ_16_TO_8_SUPPORTED + if (iBitDepth == 16) +# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + png_set_scale_16(png_ptr); +# else + png_set_strip_16(png_ptr); +# endif +#endif + if (iColorType == PNG_COLOR_TYPE_PALETTE) + png_set_expand(png_ptr); + if (iBitDepth < 8) + png_set_expand(png_ptr); + if (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS)) + png_set_expand(png_ptr); + if (iColorType == PNG_COLOR_TYPE_GRAY || + iColorType == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_gray_to_rgb(png_ptr); + + /* set the background color to draw transparent and alpha images over */ + if (png_get_bKGD(png_ptr, info_ptr, &pBackground)) + { + png_set_background(png_ptr, pBackground, PNG_BACKGROUND_GAMMA_FILE, 1, 1.0); + pBkgColor->red = (byte) pBackground->red; + pBkgColor->green = (byte) pBackground->green; + pBkgColor->blue = (byte) pBackground->blue; + } + else + { + pBkgColor = NULL; + } + + /* if required set gamma conversion */ + if (png_get_gAMA(png_ptr, info_ptr, &dGamma)) + png_set_gamma(png_ptr, (double) 2.2, dGamma); + + /* after the transformations are registered, update info_ptr data */ + + png_read_update_info(png_ptr, info_ptr); + + /* get again width, height and the new bit-depth and color-type */ + + png_get_IHDR(png_ptr, info_ptr, piWidth, piHeight, &iBitDepth, + &iColorType, NULL, NULL, NULL); + + + /* row_bytes is the width x number of channels */ + + ulRowBytes = png_get_rowbytes(png_ptr, info_ptr); + ulChannels = png_get_channels(png_ptr, info_ptr); + + *piChannels = ulChannels; + + /* now we can allocate memory to store the image */ + + if (pbImageData) + { + free (pbImageData); + pbImageData = NULL; + } + if ((pbImageData = (png_byte *) malloc(ulRowBytes * (*piHeight) + * sizeof(png_byte))) == NULL) + { + png_error(png_ptr, "Visual PNG: out of memory"); + } + *ppbImageData = pbImageData; + + /* and allocate memory for an array of row-pointers */ + + if ((ppbRowPointers = (png_bytepp) malloc((*piHeight) + * sizeof(png_bytep))) == NULL) + { + png_error(png_ptr, "Visual PNG: out of memory"); + } + + /* set the individual row-pointers to point at the correct offsets */ + + for (i = 0; i < (*piHeight); i++) + ppbRowPointers[i] = pbImageData + i * ulRowBytes; + + /* now we can go ahead and just read the whole image */ + + png_read_image(png_ptr, ppbRowPointers); + + /* read the additional chunks in the PNG file (not really needed) */ + + png_read_end(png_ptr, NULL); + + /* and we're done */ + + free (ppbRowPointers); + ppbRowPointers = NULL; + + /* yepp, done */ + } + + Catch (msg) + { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + + *ppbImageData = pbImageData = NULL; + + if(ppbRowPointers) + free (ppbRowPointers); + + fclose(pfFile); + + return FALSE; + } + + fclose (pfFile); + + return TRUE; +} + + +BOOL PngSaveImage (PTSTR pstrFileName, png_byte *pDiData, + int iWidth, int iHeight, png_color bkgColor) +{ + const int ciBitDepth = 8; + const int ciChannels = 3; + + static FILE *pfFile; + png_uint_32 ulRowBytes; + static png_byte **ppbRowPointers = NULL; + int i; + + /* open the PNG output file */ + + if (!pstrFileName) + return FALSE; + + if (!(pfFile = fopen(pstrFileName, "wb"))) + return FALSE; + + /* prepare the standard PNG structures */ + + png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, NULL, + (png_error_ptr)png_cexcept_error, (png_error_ptr)NULL); + if (!png_ptr) + { + fclose(pfFile); + return FALSE; + } + + info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) { + fclose(pfFile); + png_destroy_write_struct(&png_ptr, (png_infopp) NULL); + return FALSE; + } + + Try + { + /* initialize the png structure */ + +#ifdef PNG_STDIO_SUPPORTED + png_init_io(png_ptr, pfFile); +#else + png_set_write_fn(png_ptr, (png_voidp)pfFile, png_write_data, png_flush); +#endif + + /* we're going to write a very simple 3x8-bit RGB image */ + + png_set_IHDR(png_ptr, info_ptr, iWidth, iHeight, ciBitDepth, + PNG_COLOR_TYPE_RGB, PNG_INTERLACE_NONE, PNG_COMPRESSION_TYPE_BASE, + PNG_FILTER_TYPE_BASE); + + /* write the file header information */ + + png_write_info(png_ptr, info_ptr); + + /* swap the BGR pixels in the DiData structure to RGB */ + + png_set_bgr(png_ptr); + + /* row_bytes is the width x number of channels */ + + ulRowBytes = iWidth * ciChannels; + + /* we can allocate memory for an array of row-pointers */ + + if ((ppbRowPointers = (png_bytepp) malloc(iHeight * sizeof(png_bytep))) == NULL) + Throw "Visualpng: Out of memory"; + + /* set the individual row-pointers to point at the correct offsets */ + + for (i = 0; i < iHeight; i++) + ppbRowPointers[i] = pDiData + i * (((ulRowBytes + 3) >> 2) << 2); + + /* write out the entire image data in one call */ + + png_write_image (png_ptr, ppbRowPointers); + + /* write the additional chunks to the PNG file (not really needed) */ + + png_write_end(png_ptr, info_ptr); + + /* and we're done */ + + free (ppbRowPointers); + ppbRowPointers = NULL; + + /* clean up after the write, and free any memory allocated */ + + png_destroy_write_struct(&png_ptr, (png_infopp) NULL); + + /* yepp, done */ + } + + Catch (msg) + { + png_destroy_write_struct(&png_ptr, (png_infopp) NULL); + + if(ppbRowPointers) + free (ppbRowPointers); + + fclose(pfFile); + + return FALSE; + } + + fclose (pfFile); + + return TRUE; +} + +#ifndef PNG_STDIO_SUPPORTED + +static void +png_read_data(png_structp png_ptr, png_bytep data, png_size_t length) +{ + png_size_t check; + + /* fread() returns 0 on error, so it is OK to store this in a png_size_t + * instead of an int, which is what fread() actually returns. + */ + check = (png_size_t)fread(data, (png_size_t)1, length, + (FILE *)png_ptr->io_ptr); + + if (check != length) + { + png_error(png_ptr, "Read Error"); + } +} + +static void +png_write_data(png_structp png_ptr, png_bytep data, png_size_t length) +{ + png_uint_32 check; + + check = fwrite(data, 1, length, (FILE *)(png_ptr->io_ptr)); + if (check != length) + { + png_error(png_ptr, "Write Error"); + } +} + +static void +png_flush(png_structp png_ptr) +{ + FILE *io_ptr; + io_ptr = (FILE *)CVT_PTR((png_ptr->io_ptr)); + if (io_ptr != NULL) + fflush(io_ptr); +} + +#endif + +/*----------------- + * end of source + *----------------- + */ diff --git a/src/SDL2/external/libpng-1.6.2/contrib/visupng/PngFile.h b/src/SDL2/external/libpng-1.6.2/contrib/visupng/PngFile.h new file mode 100644 index 000000000..474426c22 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/visupng/PngFile.h @@ -0,0 +1,30 @@ +/*------------------------------------------*/ +/* PNGFILE.H -- Header File for pngfile.c*/ +/*------------------------------------------*/ + +/* Copyright 2000, Willem van Schaik.*/ + +/* This code is released under the libpng license.*/ +/* For conditions of distribution and use, see the disclaimer*/ +/* and license in png.h*/ + +#include +#include +#include +#include + +void PngFileInitialize (HWND hwnd) ; +BOOL PngFileOpenDlg (HWND hwnd, PTSTR pstrFileName, PTSTR pstrTitleName) ; +BOOL PngFileSaveDlg (HWND hwnd, PTSTR pstrFileName, PTSTR pstrTitleName) ; + +BOOL PngLoadImage (PTSTR pstrFileName, png_byte **ppbImageData, + int *piWidth, int *piHeight, int *piChannels, png_color *pBkgColor); +BOOL PngSaveImage (PTSTR pstrFileName, png_byte *pDiData, + int iWidth, int iHeight, png_color BkgColor); + +#ifndef PNG_STDIO_SUPPORTED +static void png_read_data(png_structp png_ptr, png_bytep data, png_size_t length); +static void png_write_data(png_structp png_ptr, png_bytep data, png_size_t length); +static void png_flush(png_structp png_ptr); +#endif + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/visupng/README.txt b/src/SDL2/external/libpng-1.6.2/contrib/visupng/README.txt new file mode 100644 index 000000000..72c5cba17 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/visupng/README.txt @@ -0,0 +1,61 @@ +Microsoft Developer Studio Build File, Format Version 6.00 for VisualPng +------------------------------------------------------------------------ + +Copyright 2000, Willem van Schaik. + +This code is released under the libpng license. +For conditions of distribution and use, see the disclaimer +and license in png.h + +As a PNG .dll demo VisualPng is finished. More features would only hinder +the program's objective. However, further extensions (like support for other +graphics formats) are in development. To get these, or for pre-compiled +binaries, go to "http://www.schaik.com/png/visualpng.html". + +------------------------------------------------------------------------ + +Assumes that + + libpng DLLs and LIBs are in ..\..\projects\msvc\win32\libpng + zlib DLLs and LIBs are in ..\..\projects\msvc\win32\zlib + libpng header files are in ..\..\..\libpng + zlib header files are in ..\..\..\zlib + the pngsuite images are in ..\pngsuite + +To build: + +1) On the main menu Select "Build|Set Active configuration". + Choose the configuration that corresponds to the library you want to test. + This library must have been built using the libpng MS project located in + the "..\..\mscv" subdirectory. + +2) Select "Build|Clean" + +3) Select "Build|Rebuild All" + +4) After compiling and linking VisualPng will be started to view an image + from the PngSuite directory. Press Ctrl-N (and Ctrl-V) for other images. + + +To install: + +When distributing VisualPng (or a further development) the following options +are available: + +1) Build the program with the configuration "Win32 LIB" and you only need to + include the executable from the ./lib directory in your distribution. + +2) Build the program with the configuration "Win32 DLL" and you need to put + in your distribution the executable from the ./dll directory and the dll's + libpng1.dll, zlib.dll and msvcrt.dll. These need to be in the user's PATH. + + +Willem van Schaik +Calgary, June 6th 2000 + +P.S. VisualPng was written based on preliminary work of: + + - Simon-Pierre Cadieux + - Glenn Randers-Pehrson + - Greg Roelofs + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.c b/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.c new file mode 100644 index 000000000..236525a59 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.c @@ -0,0 +1,970 @@ +/*------------------------------------ + * VisualPng.C -- Shows a PNG image + *------------------------------------ + * + * Copyright 2000, Willem van Schaik. + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +/* switches */ + +/* defines */ + +#define PROGNAME "VisualPng" +#define LONGNAME "Win32 Viewer for PNG-files" +#define VERSION "1.0 of 2000 June 07" + +/* constants */ + +#define MARGIN 8 + +/* standard includes */ + +#include +#include +#include +#include +#include + +/* application includes */ + +#include "png.h" +#include "pngfile.h" +#include "resource.h" + +/* macros */ + +/* function prototypes */ + +LRESULT CALLBACK WndProc (HWND, UINT, WPARAM, LPARAM); +BOOL CALLBACK AboutDlgProc (HWND, UINT, WPARAM, LPARAM) ; + +BOOL CenterAbout (HWND hwndChild, HWND hwndParent); + +BOOL BuildPngList (PTSTR pstrPathName, TCHAR **ppFileList, int *pFileCount, + int *pFileIndex); + +BOOL SearchPngList (TCHAR *pFileList, int FileCount, int *pFileIndex, + PTSTR pstrPrevName, PTSTR pstrNextName); + +BOOL LoadImageFile(HWND hwnd, PTSTR pstrPathName, + png_byte **ppbImage, int *pxImgSize, int *pyImgSize, int *piChannels, + png_color *pBkgColor); + +BOOL DisplayImage (HWND hwnd, BYTE **ppDib, + BYTE **ppDiData, int cxWinSize, int cyWinSize, + BYTE *pbImage, int cxImgSize, int cyImgSize, int cImgChannels, + BOOL bStretched); + +BOOL InitBitmap ( + BYTE *pDiData, int cxWinSize, int cyWinSize); + +BOOL FillBitmap ( + BYTE *pDiData, int cxWinSize, int cyWinSize, + BYTE *pbImage, int cxImgSize, int cyImgSize, int cImgChannels, + BOOL bStretched); + +/* a few global variables */ + +static char *szProgName = PROGNAME; +static char *szAppName = LONGNAME; +static char *szIconName = PROGNAME; +static char szCmdFileName [MAX_PATH]; + +/* MAIN routine */ + +int WINAPI WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance, + PSTR szCmdLine, int iCmdShow) +{ + HACCEL hAccel; + HWND hwnd; + MSG msg; + WNDCLASS wndclass; + int ixBorders, iyBorders; + + wndclass.style = CS_HREDRAW | CS_VREDRAW; + wndclass.lpfnWndProc = WndProc; + wndclass.cbClsExtra = 0; + wndclass.cbWndExtra = 0; + wndclass.hInstance = hInstance; + wndclass.hIcon = LoadIcon (hInstance, szIconName) ; + wndclass.hCursor = LoadCursor (NULL, IDC_ARROW); + wndclass.hbrBackground = NULL; /* (HBRUSH) GetStockObject (GRAY_BRUSH); */ + wndclass.lpszMenuName = szProgName; + wndclass.lpszClassName = szProgName; + + if (!RegisterClass (&wndclass)) + { + MessageBox (NULL, TEXT ("Error: this program requires Windows NT!"), + szProgName, MB_ICONERROR); + return 0; + } + + /* if filename given on commandline, store it */ + if ((szCmdLine != NULL) && (*szCmdLine != '\0')) + if (szCmdLine[0] == '"') + strncpy (szCmdFileName, szCmdLine + 1, strlen(szCmdLine) - 2); + else + strcpy (szCmdFileName, szCmdLine); + else + strcpy (szCmdFileName, ""); + + /* calculate size of window-borders */ + ixBorders = 2 * (GetSystemMetrics (SM_CXBORDER) + + GetSystemMetrics (SM_CXDLGFRAME)); + iyBorders = 2 * (GetSystemMetrics (SM_CYBORDER) + + GetSystemMetrics (SM_CYDLGFRAME)) + + GetSystemMetrics (SM_CYCAPTION) + + GetSystemMetrics (SM_CYMENUSIZE) + + 1; /* WvS: don't ask me why? */ + + hwnd = CreateWindow (szProgName, szAppName, + WS_OVERLAPPEDWINDOW, + CW_USEDEFAULT, CW_USEDEFAULT, + 512 + 2 * MARGIN + ixBorders, 384 + 2 * MARGIN + iyBorders, +/* CW_USEDEFAULT, CW_USEDEFAULT, */ + NULL, NULL, hInstance, NULL); + + ShowWindow (hwnd, iCmdShow); + UpdateWindow (hwnd); + + hAccel = LoadAccelerators (hInstance, szProgName); + + while (GetMessage (&msg, NULL, 0, 0)) + { + if (!TranslateAccelerator (hwnd, hAccel, &msg)) + { + TranslateMessage (&msg); + DispatchMessage (&msg); + } + } + return msg.wParam; +} + +LRESULT CALLBACK WndProc (HWND hwnd, UINT message, WPARAM wParam, + LPARAM lParam) +{ + static HINSTANCE hInstance ; + static HDC hdc; + static PAINTSTRUCT ps; + static HMENU hMenu; + + static BITMAPFILEHEADER *pbmfh; + static BITMAPINFOHEADER *pbmih; + static BYTE *pbImage; + static int cxWinSize, cyWinSize; + static int cxImgSize, cyImgSize; + static int cImgChannels; + static png_color bkgColor = {127, 127, 127}; + + static BOOL bStretched = TRUE; + + static BYTE *pDib = NULL; + static BYTE *pDiData = NULL; + + static TCHAR szImgPathName [MAX_PATH]; + static TCHAR szTitleName [MAX_PATH]; + + static TCHAR *pPngFileList = NULL; + static int iPngFileCount; + static int iPngFileIndex; + + BOOL bOk; + + switch (message) + { + case WM_CREATE: + hInstance = ((LPCREATESTRUCT) lParam)->hInstance ; + PngFileInitialize (hwnd); + + strcpy (szImgPathName, ""); + + /* in case we process file given on command-line */ + + if (szCmdFileName[0] != '\0') + { + strcpy (szImgPathName, szCmdFileName); + + /* read the other png-files in the directory for later */ + /* next/previous commands */ + + BuildPngList (szImgPathName, &pPngFileList, &iPngFileCount, + &iPngFileIndex); + + /* load the image from file */ + + if (!LoadImageFile (hwnd, szImgPathName, + &pbImage, &cxImgSize, &cyImgSize, &cImgChannels, &bkgColor)) + return 0; + + /* invalidate the client area for later update */ + + InvalidateRect (hwnd, NULL, TRUE); + + /* display the PNG into the DIBitmap */ + + DisplayImage (hwnd, &pDib, &pDiData, cxWinSize, cyWinSize, + pbImage, cxImgSize, cyImgSize, cImgChannels, bStretched); + } + + return 0; + + case WM_SIZE: + cxWinSize = LOWORD (lParam); + cyWinSize = HIWORD (lParam); + + /* invalidate the client area for later update */ + + InvalidateRect (hwnd, NULL, TRUE); + + /* display the PNG into the DIBitmap */ + + DisplayImage (hwnd, &pDib, &pDiData, cxWinSize, cyWinSize, + pbImage, cxImgSize, cyImgSize, cImgChannels, bStretched); + + return 0; + + case WM_INITMENUPOPUP: + hMenu = GetMenu (hwnd); + + if (pbImage) + EnableMenuItem (hMenu, IDM_FILE_SAVE, MF_ENABLED); + else + EnableMenuItem (hMenu, IDM_FILE_SAVE, MF_GRAYED); + + return 0; + + case WM_COMMAND: + hMenu = GetMenu (hwnd); + + switch (LOWORD (wParam)) + { + case IDM_FILE_OPEN: + + /* show the File Open dialog box */ + + if (!PngFileOpenDlg (hwnd, szImgPathName, szTitleName)) + return 0; + + /* read the other png-files in the directory for later */ + /* next/previous commands */ + + BuildPngList (szImgPathName, &pPngFileList, &iPngFileCount, + &iPngFileIndex); + + /* load the image from file */ + + if (!LoadImageFile (hwnd, szImgPathName, + &pbImage, &cxImgSize, &cyImgSize, &cImgChannels, &bkgColor)) + return 0; + + /* invalidate the client area for later update */ + + InvalidateRect (hwnd, NULL, TRUE); + + /* display the PNG into the DIBitmap */ + + DisplayImage (hwnd, &pDib, &pDiData, cxWinSize, cyWinSize, + pbImage, cxImgSize, cyImgSize, cImgChannels, bStretched); + + return 0; + + case IDM_FILE_SAVE: + + /* show the File Save dialog box */ + + if (!PngFileSaveDlg (hwnd, szImgPathName, szTitleName)) + return 0; + + /* save the PNG to a disk file */ + + SetCursor (LoadCursor (NULL, IDC_WAIT)); + ShowCursor (TRUE); + + bOk = PngSaveImage (szImgPathName, pDiData, cxWinSize, cyWinSize, + bkgColor); + + ShowCursor (FALSE); + SetCursor (LoadCursor (NULL, IDC_ARROW)); + + if (!bOk) + MessageBox (hwnd, TEXT ("Error in saving the PNG image"), + szProgName, MB_ICONEXCLAMATION | MB_OK); + return 0; + + case IDM_FILE_NEXT: + + /* read next entry in the directory */ + + if (SearchPngList (pPngFileList, iPngFileCount, &iPngFileIndex, + NULL, szImgPathName)) + { + if (strcmp (szImgPathName, "") == 0) + return 0; + + /* load the image from file */ + + if (!LoadImageFile (hwnd, szImgPathName, &pbImage, + &cxImgSize, &cyImgSize, &cImgChannels, &bkgColor)) + return 0; + + /* invalidate the client area for later update */ + + InvalidateRect (hwnd, NULL, TRUE); + + /* display the PNG into the DIBitmap */ + + DisplayImage (hwnd, &pDib, &pDiData, cxWinSize, cyWinSize, + pbImage, cxImgSize, cyImgSize, cImgChannels, bStretched); + } + + return 0; + + case IDM_FILE_PREVIOUS: + + /* read previous entry in the directory */ + + if (SearchPngList (pPngFileList, iPngFileCount, &iPngFileIndex, + szImgPathName, NULL)) + { + + if (strcmp (szImgPathName, "") == 0) + return 0; + + /* load the image from file */ + + if (!LoadImageFile (hwnd, szImgPathName, &pbImage, &cxImgSize, + &cyImgSize, &cImgChannels, &bkgColor)) + return 0; + + /* invalidate the client area for later update */ + + InvalidateRect (hwnd, NULL, TRUE); + + /* display the PNG into the DIBitmap */ + + DisplayImage (hwnd, &pDib, &pDiData, cxWinSize, cyWinSize, + pbImage, cxImgSize, cyImgSize, cImgChannels, bStretched); + } + + return 0; + + case IDM_FILE_EXIT: + + /* more cleanup needed... */ + + /* free image buffer */ + + if (pDib != NULL) + { + free (pDib); + pDib = NULL; + } + + /* free file-list */ + + if (pPngFileList != NULL) + { + free (pPngFileList); + pPngFileList = NULL; + } + + /* let's go ... */ + + exit (0); + + return 0; + + case IDM_OPTIONS_STRETCH: + bStretched = !bStretched; + if (bStretched) + CheckMenuItem (hMenu, IDM_OPTIONS_STRETCH, MF_CHECKED); + else + CheckMenuItem (hMenu, IDM_OPTIONS_STRETCH, MF_UNCHECKED); + + /* invalidate the client area for later update */ + + InvalidateRect (hwnd, NULL, TRUE); + + /* display the PNG into the DIBitmap */ + + DisplayImage (hwnd, &pDib, &pDiData, cxWinSize, cyWinSize, + pbImage, cxImgSize, cyImgSize, cImgChannels, bStretched); + + return 0; + + case IDM_HELP_ABOUT: + DialogBox (hInstance, TEXT ("AboutBox"), hwnd, AboutDlgProc) ; + return 0; + + } /* end switch */ + + break; + + case WM_PAINT: + hdc = BeginPaint (hwnd, &ps); + + if (pDib) + SetDIBitsToDevice (hdc, 0, 0, cxWinSize, cyWinSize, 0, 0, + 0, cyWinSize, pDiData, (BITMAPINFO *) pDib, DIB_RGB_COLORS); + + EndPaint (hwnd, &ps); + return 0; + + case WM_DESTROY: + if (pbmfh) + { + free (pbmfh); + pbmfh = NULL; + } + + PostQuitMessage (0); + return 0; + } + + return DefWindowProc (hwnd, message, wParam, lParam); +} + +BOOL CALLBACK AboutDlgProc (HWND hDlg, UINT message, + WPARAM wParam, LPARAM lParam) +{ + switch (message) + { + case WM_INITDIALOG : + ShowWindow (hDlg, SW_HIDE); + CenterAbout (hDlg, GetWindow (hDlg, GW_OWNER)); + ShowWindow (hDlg, SW_SHOW); + return TRUE ; + + case WM_COMMAND : + switch (LOWORD (wParam)) + { + case IDOK : + case IDCANCEL : + EndDialog (hDlg, 0) ; + return TRUE ; + } + break ; + } + return FALSE ; +} + +/*--------------- + * CenterAbout + *--------------- + */ +BOOL CenterAbout (HWND hwndChild, HWND hwndParent) +{ + RECT rChild, rParent, rWorkArea; + int wChild, hChild, wParent, hParent; + int xNew, yNew; + BOOL bResult; + + /* Get the Height and Width of the child window */ + GetWindowRect (hwndChild, &rChild); + wChild = rChild.right - rChild.left; + hChild = rChild.bottom - rChild.top; + + /* Get the Height and Width of the parent window */ + GetWindowRect (hwndParent, &rParent); + wParent = rParent.right - rParent.left; + hParent = rParent.bottom - rParent.top; + + /* Get the limits of the 'workarea' */ + bResult = SystemParametersInfo( + SPI_GETWORKAREA, /* system parameter to query or set */ + sizeof(RECT), + &rWorkArea, + 0); + if (!bResult) { + rWorkArea.left = rWorkArea.top = 0; + rWorkArea.right = GetSystemMetrics(SM_CXSCREEN); + rWorkArea.bottom = GetSystemMetrics(SM_CYSCREEN); + } + + /* Calculate new X position, then adjust for workarea */ + xNew = rParent.left + ((wParent - wChild) /2); + if (xNew < rWorkArea.left) { + xNew = rWorkArea.left; + } else if ((xNew+wChild) > rWorkArea.right) { + xNew = rWorkArea.right - wChild; + } + + /* Calculate new Y position, then adjust for workarea */ + yNew = rParent.top + ((hParent - hChild) /2); + if (yNew < rWorkArea.top) { + yNew = rWorkArea.top; + } else if ((yNew+hChild) > rWorkArea.bottom) { + yNew = rWorkArea.bottom - hChild; + } + + /* Set it, and return */ + return SetWindowPos (hwndChild, NULL, xNew, yNew, 0, 0, SWP_NOSIZE | + SWP_NOZORDER); +} + +/*---------------- + * BuildPngList + *---------------- + */ +BOOL BuildPngList (PTSTR pstrPathName, TCHAR **ppFileList, int *pFileCount, + int *pFileIndex) +{ + static TCHAR szImgPathName [MAX_PATH]; + static TCHAR szImgFileName [MAX_PATH]; + static TCHAR szImgFindName [MAX_PATH]; + + WIN32_FIND_DATA finddata; + HANDLE hFind; + + static TCHAR szTmp [MAX_PATH]; + BOOL bOk; + int i, ii; + int j, jj; + + /* free previous file-list */ + + if (*ppFileList != NULL) + { + free (*ppFileList); + *ppFileList = NULL; + } + + /* extract foldername, filename and search-name */ + + strcpy (szImgPathName, pstrPathName); + strcpy (szImgFileName, strrchr (pstrPathName, '\\') + 1); + + strcpy (szImgFindName, szImgPathName); + *(strrchr (szImgFindName, '\\') + 1) = '\0'; + strcat (szImgFindName, "*.png"); + + /* first cycle: count number of files in directory for memory allocation */ + + *pFileCount = 0; + + hFind = FindFirstFile(szImgFindName, &finddata); + bOk = (hFind != (HANDLE) -1); + + while (bOk) + { + *pFileCount += 1; + bOk = FindNextFile(hFind, &finddata); + } + FindClose(hFind); + + /* allocation memory for file-list */ + + *ppFileList = (TCHAR *) malloc (*pFileCount * MAX_PATH); + + /* second cycle: read directory and store filenames in file-list */ + + hFind = FindFirstFile(szImgFindName, &finddata); + bOk = (hFind != (HANDLE) -1); + + i = 0; + ii = 0; + while (bOk) + { + strcpy (*ppFileList + ii, szImgPathName); + strcpy (strrchr(*ppFileList + ii, '\\') + 1, finddata.cFileName); + + if (strcmp(pstrPathName, *ppFileList + ii) == 0) + *pFileIndex = i; + + ii += MAX_PATH; + i++; + + bOk = FindNextFile(hFind, &finddata); + } + FindClose(hFind); + + /* finally we must sort the file-list */ + + for (i = 0; i < *pFileCount - 1; i++) + { + ii = i * MAX_PATH; + for (j = i+1; j < *pFileCount; j++) + { + jj = j * MAX_PATH; + if (strcmp (*ppFileList + ii, *ppFileList + jj) > 0) + { + strcpy (szTmp, *ppFileList + jj); + strcpy (*ppFileList + jj, *ppFileList + ii); + strcpy (*ppFileList + ii, szTmp); + + /* check if this was the current image that we moved */ + + if (*pFileIndex == i) + *pFileIndex = j; + else + if (*pFileIndex == j) + *pFileIndex = i; + } + } + } + + return TRUE; +} + +/*---------------- + * SearchPngList + *---------------- + */ + +BOOL SearchPngList ( + TCHAR *pFileList, int FileCount, int *pFileIndex, + PTSTR pstrPrevName, PTSTR pstrNextName) +{ + if (FileCount > 0) + { + /* get previous entry */ + + if (pstrPrevName != NULL) + { + if (*pFileIndex > 0) + *pFileIndex -= 1; + else + *pFileIndex = FileCount - 1; + + strcpy (pstrPrevName, pFileList + (*pFileIndex * MAX_PATH)); + } + + /* get next entry */ + + if (pstrNextName != NULL) + { + if (*pFileIndex < FileCount - 1) + *pFileIndex += 1; + else + *pFileIndex = 0; + + strcpy (pstrNextName, pFileList + (*pFileIndex * MAX_PATH)); + } + + return TRUE; + } + else + { + return FALSE; + } +} + +/*----------------- + * LoadImageFile + *----------------- + */ + +BOOL LoadImageFile (HWND hwnd, PTSTR pstrPathName, + png_byte **ppbImage, int *pxImgSize, int *pyImgSize, + int *piChannels, png_color *pBkgColor) +{ + static TCHAR szTmp [MAX_PATH]; + + /* if there's an existing PNG, free the memory */ + + if (*ppbImage) + { + free (*ppbImage); + *ppbImage = NULL; + } + + /* Load the entire PNG into memory */ + + SetCursor (LoadCursor (NULL, IDC_WAIT)); + ShowCursor (TRUE); + + PngLoadImage (pstrPathName, ppbImage, pxImgSize, pyImgSize, piChannels, + pBkgColor); + + ShowCursor (FALSE); + SetCursor (LoadCursor (NULL, IDC_ARROW)); + + if (*ppbImage != NULL) + { + sprintf (szTmp, "VisualPng - %s", strrchr(pstrPathName, '\\') + 1); + SetWindowText (hwnd, szTmp); + } + else + { + MessageBox (hwnd, TEXT ("Error in loading the PNG image"), + szProgName, MB_ICONEXCLAMATION | MB_OK); + return FALSE; + } + + return TRUE; +} + +/*---------------- + * DisplayImage + *---------------- + */ +BOOL DisplayImage (HWND hwnd, BYTE **ppDib, + BYTE **ppDiData, int cxWinSize, int cyWinSize, + BYTE *pbImage, int cxImgSize, int cyImgSize, int cImgChannels, + BOOL bStretched) +{ + BYTE *pDib = *ppDib; + BYTE *pDiData = *ppDiData; + /* BITMAPFILEHEADER *pbmfh; */ + BITMAPINFOHEADER *pbmih; + WORD wDIRowBytes; + png_color bkgBlack = {0, 0, 0}; + png_color bkgGray = {127, 127, 127}; + png_color bkgWhite = {255, 255, 255}; + + /* allocate memory for the Device Independant bitmap */ + + wDIRowBytes = (WORD) ((3 * cxWinSize + 3L) >> 2) << 2; + + if (pDib) + { + free (pDib); + pDib = NULL; + } + + if (!(pDib = (BYTE *) malloc (sizeof(BITMAPINFOHEADER) + + wDIRowBytes * cyWinSize))) + { + MessageBox (hwnd, TEXT ("Error in displaying the PNG image"), + szProgName, MB_ICONEXCLAMATION | MB_OK); + *ppDib = pDib = NULL; + return FALSE; + } + *ppDib = pDib; + memset (pDib, 0, sizeof(BITMAPINFOHEADER)); + + /* initialize the dib-structure */ + + pbmih = (BITMAPINFOHEADER *) pDib; + pbmih->biSize = sizeof(BITMAPINFOHEADER); + pbmih->biWidth = cxWinSize; + pbmih->biHeight = -((long) cyWinSize); + pbmih->biPlanes = 1; + pbmih->biBitCount = 24; + pbmih->biCompression = 0; + pDiData = pDib + sizeof(BITMAPINFOHEADER); + *ppDiData = pDiData; + + /* first fill bitmap with gray and image border */ + + InitBitmap (pDiData, cxWinSize, cyWinSize); + + /* then fill bitmap with image */ + + if (pbImage) + { + FillBitmap ( + pDiData, cxWinSize, cyWinSize, + pbImage, cxImgSize, cyImgSize, cImgChannels, + bStretched); + } + + return TRUE; +} + +/*-------------- + * InitBitmap + *-------------- + */ +BOOL InitBitmap (BYTE *pDiData, int cxWinSize, int cyWinSize) +{ + BYTE *dst; + int x, y, col; + + /* initialize the background with gray */ + + dst = pDiData; + for (y = 0; y < cyWinSize; y++) + { + col = 0; + for (x = 0; x < cxWinSize; x++) + { + /* fill with GRAY */ + *dst++ = 127; + *dst++ = 127; + *dst++ = 127; + col += 3; + } + /* rows start on 4 byte boundaries */ + while ((col % 4) != 0) + { + dst++; + col++; + } + } + + return TRUE; +} + +/*-------------- + * FillBitmap + *-------------- + */ +BOOL FillBitmap ( + BYTE *pDiData, int cxWinSize, int cyWinSize, + BYTE *pbImage, int cxImgSize, int cyImgSize, int cImgChannels, + BOOL bStretched) +{ + BYTE *pStretchedImage; + BYTE *pImg; + BYTE *src, *dst; + BYTE r, g, b, a; + const int cDIChannels = 3; + WORD wImgRowBytes; + WORD wDIRowBytes; + int cxNewSize, cyNewSize; + int cxImgPos, cyImgPos; + int xImg, yImg; + int xWin, yWin; + int xOld, yOld; + int xNew, yNew; + + if (bStretched) + { + cxNewSize = cxWinSize - 2 * MARGIN; + cyNewSize = cyWinSize - 2 * MARGIN; + + /* stretch the image to it's window determined size */ + + /* the following two are mathematically the same, but the first + * has side-effects because of rounding + */ +/* if ((cyNewSize / cxNewSize) > (cyImgSize / cxImgSize)) */ + if ((cyNewSize * cxImgSize) > (cyImgSize * cxNewSize)) + { + cyNewSize = cxNewSize * cyImgSize / cxImgSize; + cxImgPos = MARGIN; + cyImgPos = (cyWinSize - cyNewSize) / 2; + } + else + { + cxNewSize = cyNewSize * cxImgSize / cyImgSize; + cyImgPos = MARGIN; + cxImgPos = (cxWinSize - cxNewSize) / 2; + } + + pStretchedImage = malloc (cImgChannels * cxNewSize * cyNewSize); + pImg = pStretchedImage; + + for (yNew = 0; yNew < cyNewSize; yNew++) + { + yOld = yNew * cyImgSize / cyNewSize; + for (xNew = 0; xNew < cxNewSize; xNew++) + { + xOld = xNew * cxImgSize / cxNewSize; + + r = *(pbImage + cImgChannels * ((yOld * cxImgSize) + xOld) + 0); + g = *(pbImage + cImgChannels * ((yOld * cxImgSize) + xOld) + 1); + b = *(pbImage + cImgChannels * ((yOld * cxImgSize) + xOld) + 2); + *pImg++ = r; + *pImg++ = g; + *pImg++ = b; + if (cImgChannels == 4) + { + a = *(pbImage + cImgChannels * ((yOld * cxImgSize) + xOld) + + 3); + *pImg++ = a; + } + } + } + + /* calculate row-bytes */ + + wImgRowBytes = cImgChannels * cxNewSize; + wDIRowBytes = (WORD) ((cDIChannels * cxWinSize + 3L) >> 2) << 2; + + /* copy image to screen */ + + for (yImg = 0, yWin = cyImgPos; yImg < cyNewSize; yImg++, yWin++) + { + if (yWin >= cyWinSize - cyImgPos) + break; + src = pStretchedImage + yImg * wImgRowBytes; + dst = pDiData + yWin * wDIRowBytes + cxImgPos * cDIChannels; + + for (xImg = 0, xWin = cxImgPos; xImg < cxNewSize; xImg++, xWin++) + { + if (xWin >= cxWinSize - cxImgPos) + break; + r = *src++; + g = *src++; + b = *src++; + *dst++ = b; /* note the reverse order */ + *dst++ = g; + *dst++ = r; + if (cImgChannels == 4) + { + a = *src++; + } + } + } + + /* free memory */ + + if (pStretchedImage != NULL) + { + free (pStretchedImage); + pStretchedImage = NULL; + } + + } + + /* process the image not-stretched */ + + else + { + /* calculate the central position */ + + cxImgPos = (cxWinSize - cxImgSize) / 2; + cyImgPos = (cyWinSize - cyImgSize) / 2; + + /* check for image larger than window */ + + if (cxImgPos < MARGIN) + cxImgPos = MARGIN; + if (cyImgPos < MARGIN) + cyImgPos = MARGIN; + + /* calculate both row-bytes */ + + wImgRowBytes = cImgChannels * cxImgSize; + wDIRowBytes = (WORD) ((cDIChannels * cxWinSize + 3L) >> 2) << 2; + + /* copy image to screen */ + + for (yImg = 0, yWin = cyImgPos; yImg < cyImgSize; yImg++, yWin++) + { + if (yWin >= cyWinSize - MARGIN) + break; + src = pbImage + yImg * wImgRowBytes; + dst = pDiData + yWin * wDIRowBytes + cxImgPos * cDIChannels; + + for (xImg = 0, xWin = cxImgPos; xImg < cxImgSize; xImg++, xWin++) + { + if (xWin >= cxWinSize - MARGIN) + break; + r = *src++; + g = *src++; + b = *src++; + *dst++ = b; /* note the reverse order */ + *dst++ = g; + *dst++ = r; + if (cImgChannels == 4) + { + a = *src++; + } + } + } + } + + return TRUE; +} + +/*----------------- + * end of source + *----------------- + */ diff --git a/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.dsp b/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.dsp new file mode 100644 index 000000000..741ef6ce7 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.dsp @@ -0,0 +1,147 @@ +# Microsoft Developer Studio Project File - Name="VisualPng" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) Application" 0x0101 + +CFG=VisualPng - Win32 Debug +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "VisualPng.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "VisualPng.mak" CFG="VisualPng - Win32 Debug" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "VisualPng - Win32 Release" (based on "Win32 (x86) Application") +!MESSAGE "VisualPng - Win32 Debug" (based on "Win32 (x86) Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +MTL=midl.exe +RSC=rc.exe + +!IF "$(CFG)" == "VisualPng - Win32 Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "Release" +# PROP BASE Intermediate_Dir "Release" +# PROP BASE Ignore_Export_Lib 0 +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Release" +# PROP Intermediate_Dir "Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /O2 /I "..\.." /I "..\..\..\zlib" /D "WIN32" /D "NDEBUG" /D "PNG_NO_STDIO" /FD /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MD /W3 /O2 /I "..\.." /I "..\..\..\zlib" /D "WIN32" /D "NDEBUG" /D "PNG_NO_STDIO" /FD /c +# SUBTRACT CPP /YX +# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32 +# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32 +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /machine:I386 +# ADD LINK32 ..\..\projects\visualc6\Win32_LIB_Release\libpng.lib ..\..\..\zlib\projects\visualc6\Win32_LIB_Release\zlib.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /machine:I386 +# Begin Special Build Tool +OutDir=.\Release +SOURCE="$(InputPath)" +PostBuild_Cmds=$(outdir)\VisualPng.exe ..\..\contrib\pngsuite\basn6a16.png +# End Special Build Tool + +!ELSEIF "$(CFG)" == "VisualPng - Win32 Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "Debug" +# PROP BASE Intermediate_Dir "Debug" +# PROP BASE Ignore_Export_Lib 0 +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Debug" +# PROP Intermediate_Dir "Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /Gm /ZI /Od /I "..\.." /I "..\..\..\zlib" /D "WIN32" /D "_DEBUG" /D "PNG_NO_STDIO" /FD /GZ /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /I "..\.." /I "..\..\..\zlib" /D "WIN32" /D "_DEBUG" /D "PNG_NO_STDIO" /FD /GZ /c +# SUBTRACT CPP /YX +# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32 +# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32 +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept +# ADD LINK32 ..\..\projects\visualc6\Win32_LIB_Release\libpng.lib ..\..\..\zlib\projects\visualc6\Win32_LIB_Release\zlib.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /debug /machine:I386 /nodefaultlib:"msvcrt.lib" /pdbtype:sept +# Begin Special Build Tool +OutDir=.\Debug +SOURCE="$(InputPath)" +PostBuild_Cmds=$(outdir)\VisualPng.exe ..\..\contrib\pngsuite\basn6a16.png +# End Special Build Tool + +!ENDIF + +# Begin Target + +# Name "VisualPng - Win32 Release" +# Name "VisualPng - Win32 Debug" +# Begin Group "Source Files" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat" +# Begin Source File + +SOURCE=.\PngFile.c +# End Source File +# Begin Source File + +SOURCE=.\VisualPng.c +# End Source File +# End Group +# Begin Group "Header Files" + +# PROP Default_Filter "h;hpp;hxx;hm;inl" +# Begin Source File + +SOURCE=.\cexcept.h +# End Source File +# Begin Source File + +SOURCE=.\PngFile.h +# End Source File +# Begin Source File + +SOURCE=.\resource.h +# End Source File +# End Group +# Begin Group "Resource Files" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe" +# Begin Source File + +SOURCE=.\VisualPng.ico +# End Source File +# Begin Source File + +SOURCE=.\VisualPng.rc +# End Source File +# End Group +# End Target +# End Project diff --git a/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.dsw b/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.dsw new file mode 100644 index 000000000..a30e1cc1c --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.dsw @@ -0,0 +1,29 @@ +Microsoft Developer Studio Workspace File, Format Version 6.00 +# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE! + +############################################################################### + +Project: "VisualPng"=.\VisualPng.dsp - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Global: + +Package=<5> +{{{ +}}} + +Package=<3> +{{{ +}}} + +############################################################################### + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.ico b/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.ico new file mode 100644 index 0000000000000000000000000000000000000000..68aa3719fb523eccd4c4a706e4198ca1be2b4c62 GIT binary patch literal 766 zcmb_ayGjE=6ul!BJ4Il&5f%%#i;YeE0sqBX?6q(TQ7j^}Bh9<%xts4i6 zkcy&!=Yp>fdCw6P!YMX?g~S3@L(=jS0+)s|NiKlEgL>VOVf)WTfR)85V$RN>JwSV-vWY^X3AQl6o~-A`A21P`H#(L`ua zC6p2|SPTx|B;lEdR<4J97z(@|!YJx7#d!1r3hTe|MU4YoP< Ob-aH+fF44>&V2wPTAUpK literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.png b/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.png new file mode 100644 index 0000000000000000000000000000000000000000..c6aa80a9bfa275137e429498bc785cb2dbcdb382 GIT binary patch literal 208 zcmeAS@N?(olHy`uVBq!ia0vp^3LwnL3?x0byx0z;SkfJR9T^xl_H+M9WCils0(?ST zf%J9`j>RRx2|yNONswPKgTu2MX+Tbfr;B5V#O34!2UcDl9v_~y3Xga?K0NvO|~WI+Z?ismL3#z>)ClO+n69&&Pt@)((moHOva6OfZ2FlX_Z0}8s!jvZ1^ zUz2uRL2<>QLkbEXTG%~o9y17?WOH!($Y?g1Vbg3Ozf`fCd_X%HJYD@<);T3K0RUGo BL5BbU literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.rc b/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.rc new file mode 100644 index 000000000..6e0623a73 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/visupng/VisualPng.rc @@ -0,0 +1,152 @@ +//Microsoft Developer Studio generated resource script. +// +#include "resource.h" + +#define APSTUDIO_READONLY_SYMBOLS +///////////////////////////////////////////////////////////////////////////// +// +// Generated from the TEXTINCLUDE 2 resource. +// +#include "afxres.h" + +///////////////////////////////////////////////////////////////////////////// +#undef APSTUDIO_READONLY_SYMBOLS + +///////////////////////////////////////////////////////////////////////////// +// English (U.S.) resources + +#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_ENU) +#ifdef _WIN32 +LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US +#pragma code_page(1252) +#endif //_WIN32 + +#ifdef APSTUDIO_INVOKED +///////////////////////////////////////////////////////////////////////////// +// +// TEXTINCLUDE +// + +1 TEXTINCLUDE DISCARDABLE +BEGIN + "resource.h\0" +END + +2 TEXTINCLUDE DISCARDABLE +BEGIN + "#include ""afxres.h""\r\n" + "\0" +END + +3 TEXTINCLUDE DISCARDABLE +BEGIN + "\r\n" + "\0" +END + +#endif // APSTUDIO_INVOKED + + +///////////////////////////////////////////////////////////////////////////// +// +// Menu +// + +VISUALPNG MENU DISCARDABLE +BEGIN + POPUP "&File" + BEGIN + MENUITEM "&Open Image...\tCtrl+O", IDM_FILE_OPEN + MENUITEM "Save &As...", IDM_FILE_SAVE + MENUITEM SEPARATOR + MENUITEM "&Next Image\tCtrl+N", IDM_FILE_NEXT + MENUITEM "Pre&vious Image\tCtrl+V", IDM_FILE_PREVIOUS + MENUITEM SEPARATOR + MENUITEM "E&xit\tAlt+X", IDM_FILE_EXIT + END + POPUP "&Options" + BEGIN + MENUITEM "&Stretch", IDM_OPTIONS_STRETCH, CHECKED + END + POPUP "&Help" + BEGIN + MENUITEM "&About", IDM_HELP_ABOUT + END +END + + +///////////////////////////////////////////////////////////////////////////// +// +// Accelerator +// + +VISUALPNG ACCELERATORS DISCARDABLE +BEGIN + "N", IDM_FILE_NEXT, VIRTKEY, CONTROL, NOINVERT + "O", IDM_FILE_OPEN, VIRTKEY, CONTROL, NOINVERT + "P", IDM_FILE_PREVIOUS, VIRTKEY, CONTROL, NOINVERT + "V", IDM_FILE_PREVIOUS, VIRTKEY, CONTROL, NOINVERT + "X", IDM_FILE_EXIT, VIRTKEY, ALT, NOINVERT +END + + +///////////////////////////////////////////////////////////////////////////// +// +// Icon +// + +// Icon with lowest ID value placed first to ensure application icon +// remains consistent on all systems. +VISUALPNG ICON DISCARDABLE "VisualPng.ico" + +///////////////////////////////////////////////////////////////////////////// +// +// Dialog +// + +ABOUTBOX DIALOG DISCARDABLE 0, 0, 186, 94 +STYLE DS_MODALFRAME | WS_POPUP +FONT 8, "MS Sans Serif" +BEGIN + DEFPUSHBUTTON "OK",IDOK,68,67,50,14 + CTEXT "VisualPng 1.0 - June 2000",IDC_STATIC,49,14,88,8 + LTEXT "a PNG image viewer",IDC_STATIC,60,30,66,8 + LTEXT "(c) Willem van Schaik, 2000",IDC_STATIC,48,52,90,8 + LTEXT "to demonstrate the use of libpng in Visual C", + IDC_STATIC,25,38,136,8 +END + + +///////////////////////////////////////////////////////////////////////////// +// +// DESIGNINFO +// + +#ifdef APSTUDIO_INVOKED +GUIDELINES DESIGNINFO DISCARDABLE +BEGIN + "ABOUTBOX", DIALOG + BEGIN + LEFTMARGIN, 7 + RIGHTMARGIN, 179 + TOPMARGIN, 7 + BOTTOMMARGIN, 87 + END +END +#endif // APSTUDIO_INVOKED + +#endif // English (U.S.) resources +///////////////////////////////////////////////////////////////////////////// + + + +#ifndef APSTUDIO_INVOKED +///////////////////////////////////////////////////////////////////////////// +// +// Generated from the TEXTINCLUDE 3 resource. +// + + +///////////////////////////////////////////////////////////////////////////// +#endif // not APSTUDIO_INVOKED + diff --git a/src/SDL2/external/libpng-1.6.2/contrib/visupng/cexcept.h b/src/SDL2/external/libpng-1.6.2/contrib/visupng/cexcept.h new file mode 100644 index 000000000..5f45d7697 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/visupng/cexcept.h @@ -0,0 +1,248 @@ +/*=== +cexcept.h 2.0.1 (2008-Jul-19-Sat) +http://www.nicemice.net/cexcept/ +Adam M. Costello +http://www.nicemice.net/amc/ + +An interface for exception-handling in ANSI C (C89 and subsequent ISO +standards), developed jointly with Cosmin Truta. + + Copyright (c) 2000-2008 Adam M. Costello and Cosmin Truta. + This software may be modified only if its author and version + information is updated accurately, and may be redistributed + only if accompanied by this unaltered notice. Subject to those + restrictions, permission is granted to anyone to do anything + with this software. The copyright holders make no guarantees + regarding this software, and are not responsible for any damage + resulting from its use. + +The cexcept interface is not compatible with and cannot interact +with system exceptions (like division by zero or memory segmentation +violation), compiler-generated exceptions (like C++ exceptions), or +other exception-handling interfaces. + +When using this interface across multiple .c files, do not include +this header file directly. Instead, create a wrapper header file that +includes this header file and then invokes the define_exception_type +macro (see below). The .c files should then include that header file. + +The interface consists of one type, one well-known name, and six macros. + + +define_exception_type(type_name); + + This macro is used like an external declaration. It specifies + the type of object that gets copied from the exception thrower to + the exception catcher. The type_name can be any type that can be + assigned to, that is, a non-constant arithmetic type, struct, union, + or pointer. Examples: + + define_exception_type(int); + + enum exception { out_of_memory, bad_arguments, disk_full }; + define_exception_type(enum exception); + + struct exception { int code; const char *msg; }; + define_exception_type(struct exception); + + Because throwing an exception causes the object to be copied (not + just once, but twice), programmers may wish to consider size when + choosing the exception type. + + +struct exception_context; + + This type may be used after the define_exception_type() macro has + been invoked. A struct exception_context must be known to both + the thrower and the catcher. It is expected that there be one + context for each thread that uses exceptions. It would certainly + be dangerous for multiple threads to access the same context. + One thread can use multiple contexts, but that is likely to be + confusing and not typically useful. The application can allocate + this structure in any way it pleases--automatic, static, or dynamic. + The application programmer should pretend not to know the structure + members, which are subject to change. + + +struct exception_context *the_exception_context; + + The Try/Catch and Throw statements (described below) implicitly + refer to a context, using the name the_exception_context. It is + the application's responsibility to make sure that this name yields + the address of a mutable (non-constant) struct exception_context + wherever those statements are used. Subject to that constraint, the + application may declare a variable of this name anywhere it likes + (inside a function, in a parameter list, or externally), and may + use whatever storage class specifiers (static, extern, etc) or type + qualifiers (const, volatile, etc) it likes. Examples: + + static struct exception_context + * const the_exception_context = &foo; + + { struct exception_context *the_exception_context = bar; ... } + + int blah(struct exception_context *the_exception_context, ...); + + extern struct exception_context the_exception_context[1]; + + The last example illustrates a trick that avoids creating a pointer + object separate from the structure object. + + The name could even be a macro, for example: + + struct exception_context ec_array[numthreads]; + #define the_exception_context (ec_array + thread_id) + + Be aware that the_exception_context is used several times by the + Try/Catch/Throw macros, so it shouldn't be expensive or have side + effects. The expansion must be a drop-in replacement for an + identifier, so it's safest to put parentheses around it. + + +void init_exception_context(struct exception_context *ec); + + For context structures allocated statically (by an external + definition or using the "static" keyword), the implicit + initialization to all zeros is sufficient, but contexts allocated + by other means must be initialized using this macro before they + are used by a Try/Catch statement. It does no harm to initialize + a context more than once (by using this macro on a statically + allocated context, or using this macro twice on the same context), + but a context must not be re-initialized after it has been used by a + Try/Catch statement. + + +Try statement +Catch (expression) statement + + The Try/Catch/Throw macros are capitalized in order to avoid + confusion with the C++ keywords, which have subtly different + semantics. + + A Try/Catch statement has a syntax similar to an if/else statement, + except that the parenthesized expression goes after the second + keyword rather than the first. As with if/else, there are two + clauses, each of which may be a simple statement ending with a + semicolon or a brace-enclosed compound statement. But whereas + the else clause is optional, the Catch clause is required. The + expression must be a modifiable lvalue (something capable of being + assigned to) of the same type (disregarding type qualifiers) that + was passed to define_exception_type(). + + If a Throw that uses the same exception context as the Try/Catch is + executed within the Try clause (typically within a function called + by the Try clause), and the exception is not caught by a nested + Try/Catch statement, then a copy of the exception will be assigned + to the expression, and control will jump to the Catch clause. If no + such Throw is executed, then the assignment is not performed, and + the Catch clause is not executed. + + The expression is not evaluated unless and until the exception is + caught, which is significant if it has side effects, for example: + + Try foo(); + Catch (p[++i].e) { ... } + + IMPORTANT: Jumping into or out of a Try clause (for example via + return, break, continue, goto, longjmp) is forbidden--the compiler + will not complain, but bad things will happen at run-time. Jumping + into or out of a Catch clause is okay, and so is jumping around + inside a Try clause. In many cases where one is tempted to return + from a Try clause, it will suffice to use Throw, and then return + from the Catch clause. Another option is to set a flag variable and + use goto to jump to the end of the Try clause, then check the flag + after the Try/Catch statement. + + IMPORTANT: The values of any non-volatile automatic variables + changed within the Try clause are undefined after an exception is + caught. Therefore, variables modified inside the Try block whose + values are needed later outside the Try block must either use static + storage or be declared with the "volatile" type qualifier. + + +Throw expression; + + A Throw statement is very much like a return statement, except that + the expression is required. Whereas return jumps back to the place + where the current function was called, Throw jumps back to the Catch + clause of the innermost enclosing Try clause. The expression must + be compatible with the type passed to define_exception_type(). The + exception must be caught, otherwise the program may crash. + + Slight limitation: If the expression is a comma-expression, it must + be enclosed in parentheses. + + +Try statement +Catch_anonymous statement + + When the value of the exception is not needed, a Try/Catch statement + can use Catch_anonymous instead of Catch (expression). + + +Everything below this point is for the benefit of the compiler. The +application programmer should pretend not to know any of it, because it +is subject to change. + +===*/ + + +#ifndef CEXCEPT_H +#define CEXCEPT_H + + +#include + +#define define_exception_type(etype) \ +struct exception_context { \ + jmp_buf *penv; \ + int caught; \ + volatile struct { etype etmp; } v; \ +} + +/* etmp must be volatile because the application might use automatic */ +/* storage for the_exception_context, and etmp is modified between */ +/* the calls to setjmp() and longjmp(). A wrapper struct is used to */ +/* avoid warnings about a duplicate volatile qualifier in case etype */ +/* already includes it. */ + +#define init_exception_context(ec) ((void)((ec)->penv = 0)) + +#define Try \ + { \ + jmp_buf *exception__prev, exception__env; \ + exception__prev = the_exception_context->penv; \ + the_exception_context->penv = &exception__env; \ + if (setjmp(exception__env) == 0) { \ + do + +#define exception__catch(action) \ + while (the_exception_context->caught = 0, \ + the_exception_context->caught); \ + } \ + else { \ + the_exception_context->caught = 1; \ + } \ + the_exception_context->penv = exception__prev; \ + } \ + if (!the_exception_context->caught || action) { } \ + else + +#define Catch(e) exception__catch(((e) = the_exception_context->v.etmp, 0)) +#define Catch_anonymous exception__catch(0) + +/* Try ends with do, and Catch begins with while(0) and ends with */ +/* else, to ensure that Try/Catch syntax is similar to if/else */ +/* syntax. */ +/* */ +/* The 0 in while(0) is expressed as x=0,x in order to appease */ +/* compilers that warn about constant expressions inside while(). */ +/* Most compilers should still recognize that the condition is always */ +/* false and avoid generating code for it. */ + +#define Throw \ + for (;; longjmp(*the_exception_context->penv, 1)) \ + the_exception_context->v.etmp = + + +#endif /* CEXCEPT_H */ diff --git a/src/SDL2/external/libpng-1.6.2/contrib/visupng/resource.h b/src/SDL2/external/libpng-1.6.2/contrib/visupng/resource.h new file mode 100644 index 000000000..b62176d1d --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/contrib/visupng/resource.h @@ -0,0 +1,23 @@ +//{{NO_DEPENDENCIES}} +// Microsoft Developer Studio generated include file. +// Used by VisualPng.rc +// +#define IDM_FILE_OPEN 40001 +#define IDM_FILE_SAVE 40002 +#define IDM_FILE_NEXT 40003 +#define IDM_FILE_PREVIOUS 40004 +#define IDM_FILE_EXIT 40005 +#define IDM_OPTIONS_BACKGROUND 40006 +#define IDM_OPTIONS_STRETCH 40007 +#define IDM_HELP_ABOUT 40008 + +// Next default values for new objects +// +#ifdef APSTUDIO_INVOKED +#ifndef APSTUDIO_READONLY_SYMBOLS +#define _APS_NEXT_RESOURCE_VALUE 113 +#define _APS_NEXT_COMMAND_VALUE 40009 +#define _APS_NEXT_CONTROL_VALUE 1001 +#define _APS_NEXT_SYMED_VALUE 101 +#endif +#endif diff --git a/src/SDL2/external/libpng-1.6.2/depcomp b/src/SDL2/external/libpng-1.6.2/depcomp new file mode 100755 index 000000000..3f02f5d00 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/depcomp @@ -0,0 +1,790 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2012-10-18.11; # UTC + +# Copyright (C) 1999-2012 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputting dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +# Get the directory component of the given path, and save it in the +# global variables '$dir'. Note that this directory component will +# be either empty or ending with a '/' character. This is deliberate. +set_dir_from () +{ + case $1 in + */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; + *) dir=;; + esac +} + +# Get the suffix-stripped basename of the given path, and save it the +# global variable '$base'. +set_base_from () +{ + base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` +} + +# If no dependency file was actually created by the compiler invocation, +# we still have to create a dummy depfile, to avoid errors with the +# Makefile "include basename.Plo" scheme. +make_dummy_depfile () +{ + echo "#dummy" > "$depfile" +} + +# Factor out some common post-processing of the generated depfile. +# Requires the auxiliary global variable '$tmpdepfile' to be set. +aix_post_process_depfile () +{ + # If the compiler actually managed to produce a dependency file, + # post-process it. + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependency.h'. + # Do two passes, one to just change these to + # $object: dependency.h + # and one to simply output + # dependency.h: + # which is needed to avoid the deleted-header problem. + { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" + sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" + } > "$depfile" + rm -f "$tmpdepfile" + else + make_dummy_depfile + fi +} + +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' +# Character ranges might be problematic outside the C locale. +# These definitions help. +upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ +lower=abcdefghijklmnopqrstuvwxyz +digits=0123456789 +alpha=${upper}${lower} + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Avoid interferences from the environment. +gccflag= dashmflag= + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. + gccflag=-qmakedep=gcc,-MF + depmode=gcc +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. +## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. +## (see the conditional assignment to $gccflag above). +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). Also, it might not be +## supported by the other compilers which use the 'gcc' depmode. +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The second -e expression handles DOS-style file names with drive + # letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the "deleted header file" problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. +## Some versions of gcc put a space before the ':'. On the theory +## that the space means something, we add a space to the output as +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like '#:fec' to the end of the + # dependency line. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ + | tr "$nl" ' ' >> "$depfile" + echo >> "$depfile" + # The second pass generates a dummy entry for each header file. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + make_dummy_depfile + fi + rm -f "$tmpdepfile" + ;; + +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts '$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + set_dir_from "$object" + set_base_from "$object" + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + aix_post_process_depfile + ;; + +tcc) + # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 + # FIXME: That version still under development at the moment of writing. + # Make that this statement remains true also for stable, released + # versions. + # It will wrap lines (doesn't matter whether long or short) with a + # trailing '\', as in: + # + # foo.o : \ + # foo.c \ + # foo.h \ + # + # It will put a trailing '\' even on the last line, and will use leading + # spaces rather than leading tabs (at least since its commit 0394caf7 + # "Emit spaces for -MD"). + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. + # We have to change lines of the first kind to '$object: \'. + sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" + # And for each line of the second kind, we have to emit a 'dep.h:' + # dummy dependency, to avoid the deleted-header problem. + sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + +## The order of this option in the case statement is important, since the +## shell code in configure will try each of these formats in the order +## listed in this file. A plain '-MD' option would be understood by many +## compilers, so we must ensure this comes after the gcc and icc options. +pgcc) + # Portland's C compiler understands '-MD'. + # Will always output deps to 'file.d' where file is the root name of the + # source file under compilation, even if file resides in a subdirectory. + # The object file name does not affect the name of the '.d' file. + # pgcc 10.2 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using '\' : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + set_dir_from "$object" + # Use the source, not the object, to determine the base name, since + # that's sadly what pgcc will do too. + set_base_from "$source" + tmpdepfile=$base.d + + # For projects that build the same source file twice into different object + # files, the pgcc approach of using the *source* file root name can cause + # problems in parallel builds. Use a locking strategy to avoid stomping on + # the same $tmpdepfile. + lockdir=$base.d-lock + trap " + echo '$0: caught signal, cleaning up...' >&2 + rmdir '$lockdir' + exit 1 + " 1 2 13 15 + numtries=100 + i=$numtries + while test $i -gt 0; do + # mkdir is a portable test-and-set. + if mkdir "$lockdir" 2>/dev/null; then + # This process acquired the lock. + "$@" -MD + stat=$? + # Release the lock. + rmdir "$lockdir" + break + else + # If the lock is being held by a different process, wait + # until the winning process is done or we timeout. + while test -d "$lockdir" && test $i -gt 0; do + sleep 1 + i=`expr $i - 1` + done + fi + i=`expr $i - 1` + done + trap - 1 2 13 15 + if test $i -le 0; then + echo "$0: failed to acquire lock after $numtries attempts" >&2 + echo "$0: check lockdir '$lockdir'" >&2 + exit 1 + fi + + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + set_dir_from "$object" + set_base_from "$object" + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + make_dummy_depfile + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + set_dir_from "$object" + set_base_from "$object" + + if test "$libtool" = yes; then + # Libtool generates 2 separate objects for the 2 libraries. These + # two compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir$base.o.d # libtool 1.5 + tmpdepfile2=$dir.libs/$base.o.d # Likewise. + tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + # Same post-processing that is required for AIX mode. + aix_post_process_depfile + ;; + +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for ':' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. + "$@" $dashmflag | + sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this sed invocation + # correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process the last invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed '1,2d' "$tmpdepfile" \ + | tr ' ' "$nl" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E \ + | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + | sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/src/SDL2/external/libpng-1.6.2/example.c b/src/SDL2/external/libpng-1.6.2/example.c new file mode 100644 index 000000000..ee4e227bc --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/example.c @@ -0,0 +1,1061 @@ + +#if 0 /* in case someone actually tries to compile this */ + +/* example.c - an example of using libpng + * Last changed in libpng 1.6.0 [February 14, 2013] + * Maintained 1998-2013 Glenn Randers-Pehrson + * Maintained 1996, 1997 Andreas Dilger) + * Written 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * To the extent possible under law, the authors have waived + * all copyright and related or neighboring rights to this file. + * This work is published from: United States. + */ + +/* This is an example of how to use libpng to read and write PNG files. + * The file libpng-manual.txt is much more verbose then this. If you have not + * read it, do so first. This was designed to be a starting point of an + * implementation. This is not officially part of libpng, is hereby placed + * in the public domain, and therefore does not require a copyright notice. + * + * This file does not currently compile, because it is missing certain + * parts, like allocating memory to hold an image. You will have to + * supply these parts to get it to compile. For an example of a minimal + * working PNG reader/writer, see pngtest.c, included in this distribution; + * see also the programs in the contrib directory. + */ + +/* The simple, but restricted, approach to reading a PNG file or data stream + * just requires two function calls, as in the following complete program. + * Writing a file just needs one function call, so long as the data has an + * appropriate layout. + * + * The following code reads PNG image data from a file and writes it, in a + * potentially new format, to a new file. While this code will compile there is + * minimal (insufficient) error checking; for a more realistic version look at + * contrib/examples/pngtopng.c + */ +#include +#include +#include +#include +#include +#include + +int main(int argc, const char **argv) +{ + if (argc == 3) + { + png_image image; /* The control structure used by libpng */ + + /* Initialize the 'png_image' structure. */ + memset(&image, 0, (sizeof image)); + image.version = PNG_IMAGE_VERSION; + + /* The first argument is the file to read: */ + if (png_image_begin_read_from_file(&image, argv[1])) + { + png_bytep buffer; + + /* Set the format in which to read the PNG file; this code chooses a + * simple sRGB format with a non-associated alpha channel, adequate to + * store most images. + */ + image.format = PNG_FORMAT_RGBA; + + /* Now allocate enough memory to hold the image in this format; the + * PNG_IMAGE_SIZE macro uses the information about the image (width, + * height and format) stored in 'image'. + */ + buffer = malloc(PNG_IMAGE_SIZE(image)); + + /* If enough memory was available read the image in the desired format + * then write the result out to the new file. 'background' is not + * necessary when reading the image because the alpha channel is + * preserved; if it were to be removed, for example if we requested + * PNG_FORMAT_RGB, then either a solid background color would have to + * be supplied or the output buffer would have to be initialized to the + * actual background of the image. + * + * The fourth argument to png_image_finish_read is the 'row_stride' - + * this is the number of components allocated for the image in each + * row. It has to be at least as big as the value returned by + * PNG_IMAGE_ROW_STRIDE, but if you just allocate space for the + * default, minimum, size using PNG_IMAGE_SIZE as above you can pass + * zero. + * + * The final argument is a pointer to a buffer for the colormap; + * colormaps have exactly the same format as a row of image pixels (so + * you choose what format to make the colormap by setting + * image.format). A colormap is only returned if + * PNG_FORMAT_FLAG_COLORMAP is also set in image.format, so in this + * case NULL is passed as the final argument. If you do want to force + * all images into an index/color-mapped format then you can use: + * + * PNG_IMAGE_COLORMAP_SIZE(image) + * + * to find the maximum size of the colormap in bytes. + */ + if (buffer != NULL && + png_image_finish_read(&image, NULL/*background*/, buffer, + 0/*row_stride*/, NULL/*colormap*/)) + { + /* Now write the image out to the second argument. In the write + * call 'convert_to_8bit' allows 16-bit data to be squashed down to + * 8 bits; this isn't necessary here because the original read was + * to the 8-bit format. + */ + if (png_image_write_to_file(&image, argv[2], 0/*convert_to_8bit*/, + buffer, 0/*row_stride*/, NULL/*colormap*/)) + { + /* The image has been written successfully. */ + exit(0); + } + } + + else + { + /* Calling png_free_image is optional unless the simplified API was + * not run to completion. In this case if there wasn't enough + * memory for 'buffer' we didn't complete the read, so we must free + * the image: + */ + if (buffer == NULL) + png_free_image(&image); + + else + free(buffer); + } + + /* Something went wrong reading or writing the image. libpng stores a + * textual message in the 'png_image' structure: + */ + fprintf(stderr, "pngtopng: error: %s\n", image.message); + exit (1); + } + + fprintf(stderr, "pngtopng: usage: pngtopng input-file output-file\n"); + exit(1); +} + +/* That's it ;-) Of course you probably want to do more with PNG files than + * just converting them all to 32-bit RGBA PNG files; you can do that between + * the call to png_image_finish_read and png_image_write_to_file. You can also + * ask for the image data to be presented in a number of different formats. You + * do this by simply changing the 'format' parameter set before allocating the + * buffer. + * + * The format parameter consists of five flags that define various aspects of + * the image, you can simply add these together to get the format or you can use + * one of the predefined macros from png.h (as above): + * + * PNG_FORMAT_FLAG_COLOR: if set the image will have three color components per + * pixel (red, green and blue), if not set the image will just have one + * luminance (grayscale) component. + * + * PNG_FORMAT_FLAG_ALPHA: if set each pixel in the image will have an additional + * alpha value; a linear value that describes the degree the image pixel + * covers (overwrites) the contents of the existing pixel on the display. + * + * PNG_FORMAT_FLAG_LINEAR: if set the components of each pixel will be returned + * as a series of 16-bit linear values, if not set the components will be + * returned as a series of 8-bit values encoded according to the 'sRGB' + * standard. The 8-bit format is the normal format for images intended for + * direct display, because almost all display devices do the inverse of the + * sRGB transformation to the data they receive. The 16-bit format is more + * common for scientific data and image data that must be further processed; + * because it is linear simple math can be done on the component values. + * Regardless of the setting of this flag the alpha channel is always linear, + * although it will be 8 bits or 16 bits wide as specified by the flag. + * + * PNG_FORMAT_FLAG_BGR: if set the components of a color pixel will be returned + * in the order blue, then green, then red. If not set the pixel components + * are in the order red, then green, then blue. + * + * PNG_FORMAT_FLAG_AFIRST: if set the alpha channel (if present) precedes the + * color or grayscale components. If not set the alpha channel follows the + * components. + * + * You do not have to read directly from a file. You can read from memory or, + * on systems that support it, from a FILE*. This is controlled by + * the particular png_image_read_from_ function you call at the start. Likewise + * on write you can write to a FILE* if your system supports it. Check the + * macro PNG_STDIO_SUPPORTED to see if stdio support has been included in your + * libpng build. + * + * If you read 16-bit (PNG_FORMAT_FLAG_LINEAR) data you may need to write it in + * the 8-bit format for display. You do this by setting the convert_to_8bit + * flag to 'true'. + * + * Don't repeatedly convert between the 8-bit and 16-bit forms. There is + * significant data loss when 16-bit data is converted to the 8-bit encoding and + * the current libpng implementation of convertion to 16-bit is also + * significantly lossy. The latter will be fixed in the future, but the former + * is unavoidable - the 8-bit format just doesn't have enough resolution. + */ + +/* If your program needs more information from the PNG data it reads, or if you + * need to do more complex transformations, or minimise transformations, on the + * data you read, then you must use one of the several lower level libpng + * interfaces. + * + * All these interfaces require that you do your own error handling - your + * program must be able to arrange for control to return to your own code any + * time libpng encounters a problem. There are several ways to do this, but the + * standard way is to use the ANSI-C (C90) interface to establish a + * return point within your own code. You must do this if you do not use the + * simplified interface (above). + * + * The first step is to include the header files you need, including the libpng + * header file. Include any standard headers and feature test macros your + * program requires before including png.h: + */ +#include + + /* The png_jmpbuf() macro, used in error handling, became available in + * libpng version 1.0.6. If you want to be able to run your code with older + * versions of libpng, you must define the macro yourself (but only if it + * is not already defined by libpng!). + */ + +#ifndef png_jmpbuf +# define png_jmpbuf(png_ptr) ((png_ptr)->png_jmpbuf) +#endif + +/* Check to see if a file is a PNG file using png_sig_cmp(). png_sig_cmp() + * returns zero if the image is a PNG and nonzero if it isn't a PNG. + * + * The function check_if_png() shown here, but not used, returns nonzero (true) + * if the file can be opened and is a PNG, 0 (false) otherwise. + * + * If this call is successful, and you are going to keep the file open, + * you should call png_set_sig_bytes(png_ptr, PNG_BYTES_TO_CHECK); once + * you have created the png_ptr, so that libpng knows your application + * has read that many bytes from the start of the file. Make sure you + * don't call png_set_sig_bytes() with more than 8 bytes read or give it + * an incorrect number of bytes read, or you will either have read too + * many bytes (your fault), or you are telling libpng to read the wrong + * number of magic bytes (also your fault). + * + * Many applications already read the first 2 or 4 bytes from the start + * of the image to determine the file type, so it would be easiest just + * to pass the bytes to png_sig_cmp() or even skip that if you know + * you have a PNG file, and call png_set_sig_bytes(). + */ +#define PNG_BYTES_TO_CHECK 4 +int check_if_png(char *file_name, FILE **fp) +{ + char buf[PNG_BYTES_TO_CHECK]; + + /* Open the prospective PNG file. */ + if ((*fp = fopen(file_name, "rb")) == NULL) + return 0; + + /* Read in some of the signature bytes */ + if (fread(buf, 1, PNG_BYTES_TO_CHECK, *fp) != PNG_BYTES_TO_CHECK) + return 0; + + /* Compare the first PNG_BYTES_TO_CHECK bytes of the signature. + Return nonzero (true) if they match */ + + return(!png_sig_cmp(buf, (png_size_t)0, PNG_BYTES_TO_CHECK)); +} + +/* Read a PNG file. You may want to return an error code if the read + * fails (depending upon the failure). There are two "prototypes" given + * here - one where we are given the filename, and we need to open the + * file, and the other where we are given an open file (possibly with + * some or all of the magic bytes read - see comments above). + */ +#ifdef open_file /* prototype 1 */ +void read_png(char *file_name) /* We need to open the file */ +{ + png_structp png_ptr; + png_infop info_ptr; + unsigned int sig_read = 0; + png_uint_32 width, height; + int bit_depth, color_type, interlace_type; + FILE *fp; + + if ((fp = fopen(file_name, "rb")) == NULL) + return (ERROR); + +#else no_open_file /* prototype 2 */ +void read_png(FILE *fp, unsigned int sig_read) /* File is already open */ +{ + png_structp png_ptr; + png_infop info_ptr; + png_uint_32 width, height; + int bit_depth, color_type, interlace_type; +#endif no_open_file /* Only use one prototype! */ + + /* Create and initialize the png_struct with the desired error handler + * functions. If you want to use the default stderr and longjump method, + * you can supply NULL for the last three parameters. We also supply the + * the compiler header file version, so that we know if the application + * was compiled with a compatible version of the library. REQUIRED + */ + png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, + png_voidp user_error_ptr, user_error_fn, user_warning_fn); + + if (png_ptr == NULL) + { + fclose(fp); + return (ERROR); + } + + /* Allocate/initialize the memory for image information. REQUIRED. */ + info_ptr = png_create_info_struct(png_ptr); + if (info_ptr == NULL) + { + fclose(fp); + png_destroy_read_struct(&png_ptr, NULL, NULL); + return (ERROR); + } + + /* Set error handling if you are using the setjmp/longjmp method (this is + * the normal method of doing things with libpng). REQUIRED unless you + * set up your own error handlers in the png_create_read_struct() earlier. + */ + + if (setjmp(png_jmpbuf(png_ptr))) + { + /* Free all of the memory associated with the png_ptr and info_ptr */ + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + fclose(fp); + /* If we get here, we had a problem reading the file */ + return (ERROR); + } + + /* One of the following I/O initialization methods is REQUIRED */ +#ifdef streams /* PNG file I/O method 1 */ + /* Set up the input control if you are using standard C streams */ + png_init_io(png_ptr, fp); + +#else no_streams /* PNG file I/O method 2 */ + /* If you are using replacement read functions, instead of calling + * png_init_io() here you would call: + */ + png_set_read_fn(png_ptr, (void *)user_io_ptr, user_read_fn); + /* where user_io_ptr is a structure you want available to the callbacks */ +#endif no_streams /* Use only one I/O method! */ + + /* If we have already read some of the signature */ + png_set_sig_bytes(png_ptr, sig_read); + +#ifdef hilevel + /* + * If you have enough memory to read in the entire image at once, + * and you need to specify only transforms that can be controlled + * with one of the PNG_TRANSFORM_* bits (this presently excludes + * quantizing, filling, setting background, and doing gamma + * adjustment), then you can read the entire image (including + * pixels) into the info structure with this call: + */ + png_read_png(png_ptr, info_ptr, png_transforms, NULL); + +#else + /* OK, you're doing it the hard way, with the lower-level functions */ + + /* The call to png_read_info() gives us all of the information from the + * PNG file before the first IDAT (image data chunk). REQUIRED + */ + png_read_info(png_ptr, info_ptr); + + png_get_IHDR(png_ptr, info_ptr, &width, &height, &bit_depth, &color_type, + &interlace_type, NULL, NULL); + + /* Set up the data transformations you want. Note that these are all + * optional. Only call them if you want/need them. Many of the + * transformations only work on specific types of images, and many + * are mutually exclusive. + */ + + /* Tell libpng to strip 16 bit/color files down to 8 bits/color. + * Use accurate scaling if it's available, otherwise just chop off the + * low byte. + */ +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + png_set_scale_16(png_ptr); +#else + png_set_strip_16(png_ptr); +#endif + + /* Strip alpha bytes from the input data without combining with the + * background (not recommended). + */ + png_set_strip_alpha(png_ptr); + + /* Extract multiple pixels with bit depths of 1, 2, and 4 from a single + * byte into separate bytes (useful for paletted and grayscale images). + */ + png_set_packing(png_ptr); + + /* Change the order of packed pixels to least significant bit first + * (not useful if you are using png_set_packing). */ + png_set_packswap(png_ptr); + + /* Expand paletted colors into true RGB triplets */ + if (color_type == PNG_COLOR_TYPE_PALETTE) + png_set_palette_to_rgb(png_ptr); + + /* Expand grayscale images to the full 8 bits from 1, 2, or 4 bits/pixel */ + if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) + png_set_expand_gray_1_2_4_to_8(png_ptr); + + /* Expand paletted or RGB images with transparency to full alpha channels + * so the data will be available as RGBA quartets. + */ + if (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS)) + png_set_tRNS_to_alpha(png_ptr); + + /* Set the background color to draw transparent and alpha images over. + * It is possible to set the red, green, and blue components directly + * for paletted images instead of supplying a palette index. Note that + * even if the PNG file supplies a background, you are not required to + * use it - you should use the (solid) application background if it has one. + */ + + png_color_16 my_background, *image_background; + + if (png_get_bKGD(png_ptr, info_ptr, &image_background)) + png_set_background(png_ptr, image_background, + PNG_BACKGROUND_GAMMA_FILE, 1, 1.0); + else + png_set_background(png_ptr, &my_background, + PNG_BACKGROUND_GAMMA_SCREEN, 0, 1.0); + + /* Some suggestions as to how to get a screen gamma value + * + * Note that screen gamma is the display_exponent, which includes + * the CRT_exponent and any correction for viewing conditions + */ + if (/* We have a user-defined screen gamma value */) + { + screen_gamma = user-defined screen_gamma; + } + /* This is one way that applications share the same screen gamma value */ + else if ((gamma_str = getenv("SCREEN_GAMMA")) != NULL) + { + screen_gamma = atof(gamma_str); + } + /* If we don't have another value */ + else + { + screen_gamma = 2.2; /* A good guess for a PC monitor in a dimly + lit room */ + screen_gamma = 1.7 or 1.0; /* A good guess for Mac systems */ + } + + /* Tell libpng to handle the gamma conversion for you. The final call + * is a good guess for PC generated images, but it should be configurable + * by the user at run time by the user. It is strongly suggested that + * your application support gamma correction. + */ + + int intent; + + if (png_get_sRGB(png_ptr, info_ptr, &intent)) + png_set_gamma(png_ptr, screen_gamma, 0.45455); + else + { + double image_gamma; + if (png_get_gAMA(png_ptr, info_ptr, &image_gamma)) + png_set_gamma(png_ptr, screen_gamma, image_gamma); + else + png_set_gamma(png_ptr, screen_gamma, 0.45455); + } + +#ifdef PNG_READ_QUANTIZE_SUPPORTED + /* Quantize RGB files down to 8 bit palette or reduce palettes + * to the number of colors available on your screen. + */ + if (color_type & PNG_COLOR_MASK_COLOR) + { + int num_palette; + png_colorp palette; + + /* This reduces the image to the application supplied palette */ + if (/* We have our own palette */) + { + /* An array of colors to which the image should be quantized */ + png_color std_color_cube[MAX_SCREEN_COLORS]; + + png_set_quantize(png_ptr, std_color_cube, MAX_SCREEN_COLORS, + MAX_SCREEN_COLORS, NULL, 0); + } + /* This reduces the image to the palette supplied in the file */ + else if (png_get_PLTE(png_ptr, info_ptr, &palette, &num_palette)) + { + png_uint_16p histogram = NULL; + + png_get_hIST(png_ptr, info_ptr, &histogram); + + png_set_quantize(png_ptr, palette, num_palette, + max_screen_colors, histogram, 0); + } + } +#endif /* PNG_READ_QUANTIZE_SUPPORTED */ + + /* Invert monochrome files to have 0 as white and 1 as black */ + png_set_invert_mono(png_ptr); + + /* If you want to shift the pixel values from the range [0,255] or + * [0,65535] to the original [0,7] or [0,31], or whatever range the + * colors were originally in: + */ + if (png_get_valid(png_ptr, info_ptr, PNG_INFO_sBIT)) + { + png_color_8p sig_bit_p; + + png_get_sBIT(png_ptr, info_ptr, &sig_bit_p); + png_set_shift(png_ptr, sig_bit_p); + } + + /* Flip the RGB pixels to BGR (or RGBA to BGRA) */ + if (color_type & PNG_COLOR_MASK_COLOR) + png_set_bgr(png_ptr); + + /* Swap the RGBA or GA data to ARGB or AG (or BGRA to ABGR) */ + png_set_swap_alpha(png_ptr); + + /* Swap bytes of 16 bit files to least significant byte first */ + png_set_swap(png_ptr); + + /* Add filler (or alpha) byte (before/after each RGB triplet) */ + png_set_filler(png_ptr, 0xff, PNG_FILLER_AFTER); + +#ifdef PNG_READ_INTERLACING_SUPPORTED + /* Turn on interlace handling. REQUIRED if you are not using + * png_read_image(). To see how to handle interlacing passes, + * see the png_read_row() method below: + */ + number_passes = png_set_interlace_handling(png_ptr); +#else + number_passes = 1; +#endif /* PNG_READ_INTERLACING_SUPPORTED */ + + + /* Optional call to gamma correct and add the background to the palette + * and update info structure. REQUIRED if you are expecting libpng to + * update the palette for you (ie you selected such a transform above). + */ + png_read_update_info(png_ptr, info_ptr); + + /* Allocate the memory to hold the image using the fields of info_ptr. */ + + /* The easiest way to read the image: */ + png_bytep row_pointers[height]; + + /* Clear the pointer array */ + for (row = 0; row < height; row++) + row_pointers[row] = NULL; + + for (row = 0; row < height; row++) + row_pointers[row] = png_malloc(png_ptr, png_get_rowbytes(png_ptr, + info_ptr)); + + /* Now it's time to read the image. One of these methods is REQUIRED */ +#ifdef entire /* Read the entire image in one go */ + png_read_image(png_ptr, row_pointers); + +#else no_entire /* Read the image one or more scanlines at a time */ + /* The other way to read images - deal with interlacing: */ + + for (pass = 0; pass < number_passes; pass++) + { +#ifdef single /* Read the image a single row at a time */ + for (y = 0; y < height; y++) + { + png_read_rows(png_ptr, &row_pointers[y], NULL, 1); + } + +#else no_single /* Read the image several rows at a time */ + for (y = 0; y < height; y += number_of_rows) + { +#ifdef sparkle /* Read the image using the "sparkle" effect. */ + png_read_rows(png_ptr, &row_pointers[y], NULL, + number_of_rows); +#else no_sparkle /* Read the image using the "rectangle" effect */ + png_read_rows(png_ptr, NULL, &row_pointers[y], + number_of_rows); +#endif no_sparkle /* Use only one of these two methods */ + } + + /* If you want to display the image after every pass, do so here */ +#endif no_single /* Use only one of these two methods */ + } +#endif no_entire /* Use only one of these two methods */ + + /* Read rest of file, and get additional chunks in info_ptr - REQUIRED */ + png_read_end(png_ptr, info_ptr); +#endif hilevel + + /* At this point you have read the entire image */ + + /* Clean up after the read, and free any memory allocated - REQUIRED */ + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + + /* Close the file */ + fclose(fp); + + /* That's it */ + return (OK); +} + +/* Progressively read a file */ + +int +initialize_png_reader(png_structp *png_ptr, png_infop *info_ptr) +{ + /* Create and initialize the png_struct with the desired error handler + * functions. If you want to use the default stderr and longjump method, + * you can supply NULL for the last three parameters. We also check that + * the library version is compatible in case we are using dynamically + * linked libraries. + */ + *png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, + png_voidp user_error_ptr, user_error_fn, user_warning_fn); + + if (*png_ptr == NULL) + { + *info_ptr = NULL; + return (ERROR); + } + + *info_ptr = png_create_info_struct(png_ptr); + + if (*info_ptr == NULL) + { + png_destroy_read_struct(png_ptr, info_ptr, NULL); + return (ERROR); + } + + if (setjmp(png_jmpbuf((*png_ptr)))) + { + png_destroy_read_struct(png_ptr, info_ptr, NULL); + return (ERROR); + } + + /* This one's new. You will need to provide all three + * function callbacks, even if you aren't using them all. + * If you aren't using all functions, you can specify NULL + * parameters. Even when all three functions are NULL, + * you need to call png_set_progressive_read_fn(). + * These functions shouldn't be dependent on global or + * static variables if you are decoding several images + * simultaneously. You should store stream specific data + * in a separate struct, given as the second parameter, + * and retrieve the pointer from inside the callbacks using + * the function png_get_progressive_ptr(png_ptr). + */ + png_set_progressive_read_fn(*png_ptr, (void *)stream_data, + info_callback, row_callback, end_callback); + + return (OK); +} + +int +process_data(png_structp *png_ptr, png_infop *info_ptr, + png_bytep buffer, png_uint_32 length) +{ + if (setjmp(png_jmpbuf((*png_ptr)))) + { + /* Free the png_ptr and info_ptr memory on error */ + png_destroy_read_struct(png_ptr, info_ptr, NULL); + return (ERROR); + } + + /* This one's new also. Simply give it chunks of data as + * they arrive from the data stream (in order, of course). + * On segmented machines, don't give it any more than 64K. + * The library seems to run fine with sizes of 4K, although + * you can give it much less if necessary (I assume you can + * give it chunks of 1 byte, but I haven't tried with less + * than 256 bytes yet). When this function returns, you may + * want to display any rows that were generated in the row + * callback, if you aren't already displaying them there. + */ + png_process_data(*png_ptr, *info_ptr, buffer, length); + return (OK); +} + +info_callback(png_structp png_ptr, png_infop info) +{ + /* Do any setup here, including setting any of the transformations + * mentioned in the Reading PNG files section. For now, you _must_ + * call either png_start_read_image() or png_read_update_info() + * after all the transformations are set (even if you don't set + * any). You may start getting rows before png_process_data() + * returns, so this is your last chance to prepare for that. + */ +} + +row_callback(png_structp png_ptr, png_bytep new_row, + png_uint_32 row_num, int pass) +{ + /* + * This function is called for every row in the image. If the + * image is interlaced, and you turned on the interlace handler, + * this function will be called for every row in every pass. + * + * In this function you will receive a pointer to new row data from + * libpng called new_row that is to replace a corresponding row (of + * the same data format) in a buffer allocated by your application. + * + * The new row data pointer "new_row" may be NULL, indicating there is + * no new data to be replaced (in cases of interlace loading). + * + * If new_row is not NULL then you need to call + * png_progressive_combine_row() to replace the corresponding row as + * shown below: + */ + + /* Get pointer to corresponding row in our + * PNG read buffer. + */ + png_bytep old_row = ((png_bytep *)our_data)[row_num]; + +#ifdef PNG_READ_INTERLACING_SUPPORTED + /* If both rows are allocated then copy the new row + * data to the corresponding row data. + */ + if ((old_row != NULL) && (new_row != NULL)) + png_progressive_combine_row(png_ptr, old_row, new_row); + + /* + * The rows and passes are called in order, so you don't really + * need the row_num and pass, but I'm supplying them because it + * may make your life easier. + * + * For the non-NULL rows of interlaced images, you must call + * png_progressive_combine_row() passing in the new row and the + * old row, as demonstrated above. You can call this function for + * NULL rows (it will just return) and for non-interlaced images + * (it just does the memcpy for you) if it will make the code + * easier. Thus, you can just do this for all cases: + */ + + png_progressive_combine_row(png_ptr, old_row, new_row); + + /* where old_row is what was displayed for previous rows. Note + * that the first pass (pass == 0 really) will completely cover + * the old row, so the rows do not have to be initialized. After + * the first pass (and only for interlaced images), you will have + * to pass the current row as new_row, and the function will combine + * the old row and the new row. + */ +#endif /* PNG_READ_INTERLACING_SUPPORTED */ +} + +end_callback(png_structp png_ptr, png_infop info) +{ + /* This function is called when the whole image has been read, + * including any chunks after the image (up to and including + * the IEND). You will usually have the same info chunk as you + * had in the header, although some data may have been added + * to the comments and time fields. + * + * Most people won't do much here, perhaps setting a flag that + * marks the image as finished. + */ +} + +/* Write a png file */ +void write_png(char *file_name /* , ... other image information ... */) +{ + FILE *fp; + png_structp png_ptr; + png_infop info_ptr; + png_colorp palette; + + /* Open the file */ + fp = fopen(file_name, "wb"); + if (fp == NULL) + return (ERROR); + + /* Create and initialize the png_struct with the desired error handler + * functions. If you want to use the default stderr and longjump method, + * you can supply NULL for the last three parameters. We also check that + * the library version is compatible with the one used at compile time, + * in case we are using dynamically linked libraries. REQUIRED. + */ + png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, + png_voidp user_error_ptr, user_error_fn, user_warning_fn); + + if (png_ptr == NULL) + { + fclose(fp); + return (ERROR); + } + + /* Allocate/initialize the image information data. REQUIRED */ + info_ptr = png_create_info_struct(png_ptr); + if (info_ptr == NULL) + { + fclose(fp); + png_destroy_write_struct(&png_ptr, NULL); + return (ERROR); + } + + /* Set error handling. REQUIRED if you aren't supplying your own + * error handling functions in the png_create_write_struct() call. + */ + if (setjmp(png_jmpbuf(png_ptr))) + { + /* If we get here, we had a problem writing the file */ + fclose(fp); + png_destroy_write_struct(&png_ptr, &info_ptr); + return (ERROR); + } + + /* One of the following I/O initialization functions is REQUIRED */ + +#ifdef streams /* I/O initialization method 1 */ + /* Set up the output control if you are using standard C streams */ + png_init_io(png_ptr, fp); + +#else no_streams /* I/O initialization method 2 */ + /* If you are using replacement write functions, instead of calling + * png_init_io() here you would call + */ + png_set_write_fn(png_ptr, (void *)user_io_ptr, user_write_fn, + user_IO_flush_function); + /* where user_io_ptr is a structure you want available to the callbacks */ +#endif no_streams /* Only use one initialization method */ + +#ifdef hilevel + /* This is the easy way. Use it if you already have all the + * image info living in the structure. You could "|" many + * PNG_TRANSFORM flags into the png_transforms integer here. + */ + png_write_png(png_ptr, info_ptr, png_transforms, NULL); + +#else + /* This is the hard way */ + + /* Set the image information here. Width and height are up to 2^31, + * bit_depth is one of 1, 2, 4, 8, or 16, but valid values also depend on + * the color_type selected. color_type is one of PNG_COLOR_TYPE_GRAY, + * PNG_COLOR_TYPE_GRAY_ALPHA, PNG_COLOR_TYPE_PALETTE, PNG_COLOR_TYPE_RGB, + * or PNG_COLOR_TYPE_RGB_ALPHA. interlace is either PNG_INTERLACE_NONE or + * PNG_INTERLACE_ADAM7, and the compression_type and filter_type MUST + * currently be PNG_COMPRESSION_TYPE_BASE and PNG_FILTER_TYPE_BASE. REQUIRED + */ + png_set_IHDR(png_ptr, info_ptr, width, height, bit_depth, PNG_COLOR_TYPE_???, + PNG_INTERLACE_????, PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + + /* Set the palette if there is one. REQUIRED for indexed-color images */ + palette = (png_colorp)png_malloc(png_ptr, PNG_MAX_PALETTE_LENGTH + * (sizeof (png_color))); + /* ... Set palette colors ... */ + png_set_PLTE(png_ptr, info_ptr, palette, PNG_MAX_PALETTE_LENGTH); + /* You must not free palette here, because png_set_PLTE only makes a link to + * the palette that you malloced. Wait until you are about to destroy + * the png structure. + */ + + /* Optional significant bit (sBIT) chunk */ + png_color_8 sig_bit; + + /* If we are dealing with a grayscale image then */ + sig_bit.gray = true_bit_depth; + + /* Otherwise, if we are dealing with a color image then */ + sig_bit.red = true_red_bit_depth; + sig_bit.green = true_green_bit_depth; + sig_bit.blue = true_blue_bit_depth; + + /* If the image has an alpha channel then */ + sig_bit.alpha = true_alpha_bit_depth; + + png_set_sBIT(png_ptr, info_ptr, &sig_bit); + + + /* Optional gamma chunk is strongly suggested if you have any guess + * as to the correct gamma of the image. + */ + png_set_gAMA(png_ptr, info_ptr, gamma); + + /* Optionally write comments into the image */ + { + png_text text_ptr[3]; + + char key0[]="Title"; + char text0[]="Mona Lisa"; + text_ptr[0].key = key0; + text_ptr[0].text = text0; + text_ptr[0].compression = PNG_TEXT_COMPRESSION_NONE; + text_ptr[0].itxt_length = 0; + text_ptr[0].lang = NULL; + text_ptr[0].lang_key = NULL; + + char key1[]="Author"; + char text1[]="Leonardo DaVinci"; + text_ptr[1].key = key1; + text_ptr[1].text = text1; + text_ptr[1].compression = PNG_TEXT_COMPRESSION_NONE; + text_ptr[1].itxt_length = 0; + text_ptr[1].lang = NULL; + text_ptr[1].lang_key = NULL; + + char key2[]="Description"; + char text2[]=""; + text_ptr[2].key = key2; + text_ptr[2].text = text2; + text_ptr[2].compression = PNG_TEXT_COMPRESSION_zTXt; + text_ptr[2].itxt_length = 0; + text_ptr[2].lang = NULL; + text_ptr[2].lang_key = NULL; + + png_set_text(write_ptr, write_info_ptr, text_ptr, 3); + } + + /* Other optional chunks like cHRM, bKGD, tRNS, tIME, oFFs, pHYs */ + + /* Note that if sRGB is present the gAMA and cHRM chunks must be ignored + * on read and, if your application chooses to write them, they must + * be written in accordance with the sRGB profile + */ + + /* Write the file header information. REQUIRED */ + png_write_info(png_ptr, info_ptr); + + /* If you want, you can write the info in two steps, in case you need to + * write your private chunk ahead of PLTE: + * + * png_write_info_before_PLTE(write_ptr, write_info_ptr); + * write_my_chunk(); + * png_write_info(png_ptr, info_ptr); + * + * However, given the level of known- and unknown-chunk support in 1.2.0 + * and up, this should no longer be necessary. + */ + + /* Once we write out the header, the compression type on the text + * chunks gets changed to PNG_TEXT_COMPRESSION_NONE_WR or + * PNG_TEXT_COMPRESSION_zTXt_WR, so it doesn't get written out again + * at the end. + */ + + /* Set up the transformations you want. Note that these are + * all optional. Only call them if you want them. + */ + + /* Invert monochrome pixels */ + png_set_invert_mono(png_ptr); + + /* Shift the pixels up to a legal bit depth and fill in + * as appropriate to correctly scale the image. + */ + png_set_shift(png_ptr, &sig_bit); + + /* Pack pixels into bytes */ + png_set_packing(png_ptr); + + /* Swap location of alpha bytes from ARGB to RGBA */ + png_set_swap_alpha(png_ptr); + + /* Get rid of filler (OR ALPHA) bytes, pack XRGB/RGBX/ARGB/RGBA into + * RGB (4 channels -> 3 channels). The second parameter is not used. + */ + png_set_filler(png_ptr, 0, PNG_FILLER_BEFORE); + + /* Flip BGR pixels to RGB */ + png_set_bgr(png_ptr); + + /* Swap bytes of 16-bit files to most significant byte first */ + png_set_swap(png_ptr); + + /* Swap bits of 1, 2, 4 bit packed pixel formats */ + png_set_packswap(png_ptr); + + /* Turn on interlace handling if you are not using png_write_image() */ + if (interlacing) + number_passes = png_set_interlace_handling(png_ptr); + + else + number_passes = 1; + + /* The easiest way to write the image (you may have a different memory + * layout, however, so choose what fits your needs best). You need to + * use the first method if you aren't handling interlacing yourself. + */ + png_uint_32 k, height, width; + + /* In this example, "image" is a one-dimensional array of bytes */ + png_byte image[height*width*bytes_per_pixel]; + + png_bytep row_pointers[height]; + + if (height > PNG_UINT_32_MAX/(sizeof (png_bytep))) + png_error (png_ptr, "Image is too tall to process in memory"); + + /* Set up pointers into your "image" byte array */ + for (k = 0; k < height; k++) + row_pointers[k] = image + k*width*bytes_per_pixel; + + /* One of the following output methods is REQUIRED */ + +#ifdef entire /* Write out the entire image data in one call */ + png_write_image(png_ptr, row_pointers); + + /* The other way to write the image - deal with interlacing */ + +#else no_entire /* Write out the image data by one or more scanlines */ + + /* The number of passes is either 1 for non-interlaced images, + * or 7 for interlaced images. + */ + for (pass = 0; pass < number_passes; pass++) + { + /* Write a few rows at a time. */ + png_write_rows(png_ptr, &row_pointers[first_row], number_of_rows); + + /* If you are only writing one row at a time, this works */ + for (y = 0; y < height; y++) + png_write_rows(png_ptr, &row_pointers[y], 1); + } +#endif no_entire /* Use only one output method */ + + /* You can write optional chunks like tEXt, zTXt, and tIME at the end + * as well. Shouldn't be necessary in 1.2.0 and up as all the public + * chunks are supported and you can use png_set_unknown_chunks() to + * register unknown chunks into the info structure to be written out. + */ + + /* It is REQUIRED to call this to finish writing the rest of the file */ + png_write_end(png_ptr, info_ptr); +#endif hilevel + + /* If you png_malloced a palette, free it here (don't free info_ptr->palette, + * as recommended in versions 1.0.5m and earlier of this example; if + * libpng mallocs info_ptr->palette, libpng will free it). If you + * allocated it with malloc() instead of png_malloc(), use free() instead + * of png_free(). + */ + png_free(png_ptr, palette); + palette = NULL; + + /* Similarly, if you png_malloced any data that you passed in with + * png_set_something(), such as a hist or trans array, free it here, + * when you can be sure that libpng is through with it. + */ + png_free(png_ptr, trans); + trans = NULL; + /* Whenever you use png_free() it is a good idea to set the pointer to + * NULL in case your application inadvertently tries to png_free() it + * again. When png_free() sees a NULL it returns without action, thus + * avoiding the double-free security problem. + */ + + /* Clean up after the write, and free any memory allocated */ + png_destroy_write_struct(&png_ptr, &info_ptr); + + /* Close the file */ + fclose(fp); + + /* That's it */ + return (OK); +} + +#endif /* if 0 */ diff --git a/src/SDL2/external/libpng-1.6.2/install-sh b/src/SDL2/external/libpng-1.6.2/install-sh new file mode 100755 index 000000000..377bb8687 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/install-sh @@ -0,0 +1,527 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2011-11-20.07; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# 'make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call 'install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names problematic for 'test' and other utilities. + case $src in + -* | [=\(\)!]) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + dst=$dst_arg + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/src/SDL2/external/libpng-1.6.2/libpng-config.in b/src/SDL2/external/libpng-1.6.2/libpng-config.in new file mode 100644 index 000000000..69bf8e33f --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/libpng-config.in @@ -0,0 +1,127 @@ +#! /bin/sh + +# libpng-config +# provides configuration info for libpng. + +# Copyright (C) 2002, 2004, 2006, 2007 Glenn Randers-Pehrson + +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Modeled after libxml-config. + +version="@PNGLIB_VERSION@" +prefix="@prefix@" +exec_prefix="@exec_prefix@" +libdir="@libdir@" +includedir="@includedir@/libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@" +libs="-lpng@PNGLIB_MAJOR@@PNGLIB_MINOR@" +all_libs="-lpng@PNGLIB_MAJOR@@PNGLIB_MINOR@ @LIBS@" +I_opts="-I${includedir}" +L_opts="-L${libdir}" +R_opts="" +cppflags="" +ccopts="" +ldopts="" + +usage() +{ + cat < + Copyright (c) 1998-2013 Glenn Randers-Pehrson + + This document is released under the libpng license. + For conditions of distribution and use, see the disclaimer + and license in png.h + + Based on: + + libpng versions 0.97, January 1998, through 1.6.2 - April 25, 2013 + Updated and distributed by Glenn Randers-Pehrson + Copyright (c) 1998-2013 Glenn Randers-Pehrson + + libpng 1.0 beta 6 version 0.96 May 28, 1997 + Updated and distributed by Andreas Dilger + Copyright (c) 1996, 1997 Andreas Dilger + + libpng 1.0 beta 2 - version 0.88 January 26, 1996 + For conditions of distribution and use, see copyright + notice in png.h. Copyright (c) 1995, 1996 Guy Eric + Schalnat, Group 42, Inc. + + Updated/rewritten per request in the libpng FAQ + Copyright (c) 1995, 1996 Frank J. T. Wojcik + December 18, 1995 & January 20, 1996 + + TABLE OF CONTENTS + + I. Introduction + II. Structures + III. Reading + IV. Writing + V. Simplified API + VI. Modifying/Customizing libpng + VII. MNG support + VIII. Changes to Libpng from version 0.88 + IX. Changes to Libpng from version 1.0.x to 1.2.x + X. Changes to Libpng from version 1.0.x/1.2.x to 1.4.x + XI. Changes to Libpng from version 1.4.x to 1.5.x + XII. Changes to Libpng from version 1.5.x to 1.6.x + XIII. Detecting libpng + XIV. Source code repository + XV. Coding style + XVI. Y2K Compliance in libpng + +I. Introduction + +This file describes how to use and modify the PNG reference library +(known as libpng) for your own use. There are five sections to this +file: introduction, structures, reading, writing, and modification and +configuration notes for various special platforms. In addition to this +file, example.c is a good starting point for using the library, as +it is heavily commented and should include everything most people +will need. We assume that libpng is already installed; see the +INSTALL file for instructions on how to install libpng. + +For examples of libpng usage, see the files "example.c", "pngtest.c", +and the files in the "contrib" directory, all of which are included in +the libpng distribution. + +Libpng was written as a companion to the PNG specification, as a way +of reducing the amount of time and effort it takes to support the PNG +file format in application programs. + +The PNG specification (second edition), November 2003, is available as +a W3C Recommendation and as an ISO Standard (ISO/IEC 15948:2004 (E)) at +. It is technically equivalent +to the PNG specification (second edition) but has some additional material. + +The PNG-1.0 specification is available +as RFC 2083 and as a +W3C Recommendation . + +Some additional chunks are described in the special-purpose public chunks +documents at . + +Other information +about PNG, and the latest version of libpng, can be found at the PNG home +page, . + +Most users will not have to modify the library significantly; advanced +users may want to modify it more. All attempts were made to make it as +complete as possible, while keeping the code easy to understand. +Currently, this library only supports C. Support for other languages +is being considered. + +Libpng has been designed to handle multiple sessions at one time, +to be easily modifiable, to be portable to the vast majority of +machines (ANSI, K&R, 16-, 32-, and 64-bit) available, and to be easy +to use. The ultimate goal of libpng is to promote the acceptance of +the PNG file format in whatever way possible. While there is still +work to be done (see the TODO file), libpng should cover the +majority of the needs of its users. + +Libpng uses zlib for its compression and decompression of PNG files. +Further information about zlib, and the latest version of zlib, can +be found at the zlib home page, . +The zlib compression utility is a general purpose utility that is +useful for more than PNG files, and can be used without libpng. +See the documentation delivered with zlib for more details. +You can usually find the source files for the zlib utility wherever you +find the libpng source files. + +Libpng is thread safe, provided the threads are using different +instances of the structures. Each thread should have its own +png_struct and png_info instances, and thus its own image. +Libpng does not protect itself against two threads using the +same instance of a structure. + +II. Structures + +There are two main structures that are important to libpng, png_struct +and png_info. Both are internal structures that are no longer exposed +in the libpng interface (as of libpng 1.5.0). + +The png_info structure is designed to provide information about the +PNG file. At one time, the fields of png_info were intended to be +directly accessible to the user. However, this tended to cause problems +with applications using dynamically loaded libraries, and as a result +a set of interface functions for png_info (the png_get_*() and png_set_*() +functions) was developed, and direct access to the png_info fields was +deprecated.. + +The png_struct structure is the object used by the library to decode a +single image. As of 1.5.0 this structure is also not exposed. + +Almost all libpng APIs require a pointer to a png_struct as the first argument. +Many (in particular the png_set and png_get APIs) also require a pointer +to png_info as the second argument. Some application visible macros +defined in png.h designed for basic data access (reading and writing +integers in the PNG format) don't take a png_info pointer, but it's almost +always safe to assume that a (png_struct*) has to be passed to call an API +function. + +You can have more than one png_info structure associated with an image, +as illustrated in pngtest.c, one for information valid prior to the +IDAT chunks and another (called "end_info" below) for things after them. + +The png.h header file is an invaluable reference for programming with libpng. +And while I'm on the topic, make sure you include the libpng header file: + +#include + +and also (as of libpng-1.5.0) the zlib header file, if you need it: + +#include + +Types + +The png.h header file defines a number of integral types used by the +APIs. Most of these are fairly obvious; for example types corresponding +to integers of particular sizes and types for passing color values. + +One exception is how non-integral numbers are handled. For application +convenience most APIs that take such numbers have C (double) arguments; +however, internally PNG, and libpng, use 32 bit signed integers and encode +the value by multiplying by 100,000. As of libpng 1.5.0 a convenience +macro PNG_FP_1 is defined in png.h along with a type (png_fixed_point) +which is simply (png_int_32). + +All APIs that take (double) arguments also have a matching API that +takes the corresponding fixed point integer arguments. The fixed point +API has the same name as the floating point one with "_fixed" appended. +The actual range of values permitted in the APIs is frequently less than +the full range of (png_fixed_point) (-21474 to +21474). When APIs require +a non-negative argument the type is recorded as png_uint_32 above. Consult +the header file and the text below for more information. + +Special care must be take with sCAL chunk handling because the chunk itself +uses non-integral values encoded as strings containing decimal floating point +numbers. See the comments in the header file. + +Configuration + +The main header file function declarations are frequently protected by C +preprocessing directives of the form: + + #ifdef PNG_feature_SUPPORTED + declare-function + #endif + ... + #ifdef PNG_feature_SUPPORTED + use-function + #endif + +The library can be built without support for these APIs, although a +standard build will have all implemented APIs. Application programs +should check the feature macros before using an API for maximum +portability. From libpng 1.5.0 the feature macros set during the build +of libpng are recorded in the header file "pnglibconf.h" and this file +is always included by png.h. + +If you don't need to change the library configuration from the default, skip to +the next section ("Reading"). + +Notice that some of the makefiles in the 'scripts' directory and (in 1.5.0) all +of the build project files in the 'projects' directory simply copy +scripts/pnglibconf.h.prebuilt to pnglibconf.h. This means that these build +systems do not permit easy auto-configuration of the library - they only +support the default configuration. + +The easiest way to make minor changes to the libpng configuration when +auto-configuration is supported is to add definitions to the command line +using (typically) CPPFLAGS. For example: + +CPPFLAGS=-DPNG_NO_FLOATING_ARITHMETIC + +will change the internal libpng math implementation for gamma correction and +other arithmetic calculations to fixed point, avoiding the need for fast +floating point support. The result can be seen in the generated pnglibconf.h - +make sure it contains the changed feature macro setting. + +If you need to make more extensive configuration changes - more than one or two +feature macro settings - you can either add -DPNG_USER_CONFIG to the build +command line and put a list of feature macro settings in pngusr.h or you can set +DFA_XTRA (a makefile variable) to a file containing the same information in the +form of 'option' settings. + +A. Changing pnglibconf.h + +A variety of methods exist to build libpng. Not all of these support +reconfiguration of pnglibconf.h. To reconfigure pnglibconf.h it must either be +rebuilt from scripts/pnglibconf.dfa using awk or it must be edited by hand. + +Hand editing is achieved by copying scripts/pnglibconf.h.prebuilt to +pnglibconf.h and changing the lines defining the supported features, paying +very close attention to the 'option' information in scripts/pnglibconf.dfa +that describes those features and their requirements. This is easy to get +wrong. + +B. Configuration using DFA_XTRA + +Rebuilding from pnglibconf.dfa is easy if a functioning 'awk', or a later +variant such as 'nawk' or 'gawk', is available. The configure build will +automatically find an appropriate awk and build pnglibconf.h. +The scripts/pnglibconf.mak file contains a set of make rules for doing the +same thing if configure is not used, and many of the makefiles in the scripts +directory use this approach. + +When rebuilding simply write a new file containing changed options and set +DFA_XTRA to the name of this file. This causes the build to append the new file +to the end of scripts/pnglibconf.dfa. The pngusr.dfa file should contain lines +of the following forms: + +everything = off + +This turns all optional features off. Include it at the start of pngusr.dfa to +make it easier to build a minimal configuration. You will need to turn at least +some features on afterward to enable either reading or writing code, or both. + +option feature on +option feature off + +Enable or disable a single feature. This will automatically enable other +features required by a feature that is turned on or disable other features that +require a feature which is turned off. Conflicting settings will cause an error +message to be emitted by awk. + +setting feature default value + +Changes the default value of setting 'feature' to 'value'. There are a small +number of settings listed at the top of pnglibconf.h, they are documented in the +source code. Most of these values have performance implications for the library +but most of them have no visible effect on the API. Some can also be overridden +from the API. + +This method of building a customized pnglibconf.h is illustrated in +contrib/pngminim/*. See the "$(PNGCONF):" target in the makefile and +pngusr.dfa in these directories. + +C. Configuration using PNG_USR_CONFIG + +If -DPNG_USR_CONFIG is added to the CFLAGS when pnglibconf.h is built the file +pngusr.h will automatically be included before the options in +scripts/pnglibconf.dfa are processed. Your pngusr.h file should contain only +macro definitions turning features on or off or setting settings. + +Apart from the global setting "everything = off" all the options listed above +can be set using macros in pngusr.h: + +#define PNG_feature_SUPPORTED + +is equivalent to: + +option feature on + +#define PNG_NO_feature + +is equivalent to: + +option feature off + +#define PNG_feature value + +is equivalent to: + +setting feature default value + +Notice that in both cases, pngusr.dfa and pngusr.h, the contents of the +pngusr file you supply override the contents of scripts/pnglibconf.dfa + +If confusing or incomprehensible behavior results it is possible to +examine the intermediate file pnglibconf.dfn to find the full set of +dependency information for each setting and option. Simply locate the +feature in the file and read the C comments that precede it. + +This method is also illustrated in the contrib/pngminim/* makefiles and +pngusr.h. + +III. Reading + +We'll now walk you through the possible functions to call when reading +in a PNG file sequentially, briefly explaining the syntax and purpose +of each one. See example.c and png.h for more detail. While +progressive reading is covered in the next section, you will still +need some of the functions discussed in this section to read a PNG +file. + +Setup + +You will want to do the I/O initialization(*) before you get into libpng, +so if it doesn't work, you don't have much to undo. Of course, you +will also want to insure that you are, in fact, dealing with a PNG +file. Libpng provides a simple check to see if a file is a PNG file. +To use it, pass in the first 1 to 8 bytes of the file to the function +png_sig_cmp(), and it will return 0 (false) if the bytes match the +corresponding bytes of the PNG signature, or nonzero (true) otherwise. +Of course, the more bytes you pass in, the greater the accuracy of the +prediction. + +If you are intending to keep the file pointer open for use in libpng, +you must ensure you don't read more than 8 bytes from the beginning +of the file, and you also have to make a call to png_set_sig_bytes_read() +with the number of bytes you read from the beginning. Libpng will +then only check the bytes (if any) that your program didn't read. + +(*): If you are not using the standard I/O functions, you will need +to replace them with custom functions. See the discussion under +Customizing libpng. + + + FILE *fp = fopen(file_name, "rb"); + if (!fp) + { + return (ERROR); + } + + fread(header, 1, number, fp); + is_png = !png_sig_cmp(header, 0, number); + + if (!is_png) + { + return (NOT_PNG); + } + + +Next, png_struct and png_info need to be allocated and initialized. In +order to ensure that the size of these structures is correct even with a +dynamically linked libpng, there are functions to initialize and +allocate the structures. We also pass the library version, optional +pointers to error handling functions, and a pointer to a data struct for +use by the error functions, if necessary (the pointer and functions can +be NULL if the default error handlers are to be used). See the section +on Changes to Libpng below regarding the old initialization functions. +The structure allocation functions quietly return NULL if they fail to +create the structure, so your application should check for that. + + png_structp png_ptr = png_create_read_struct + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn); + + if (!png_ptr) + return (ERROR); + + png_infop info_ptr = png_create_info_struct(png_ptr); + + if (!info_ptr) + { + png_destroy_read_struct(&png_ptr, + (png_infopp)NULL, (png_infopp)NULL); + return (ERROR); + } + +If you want to use your own memory allocation routines, +use a libpng that was built with PNG_USER_MEM_SUPPORTED defined, and use +png_create_read_struct_2() instead of png_create_read_struct(): + + png_structp png_ptr = png_create_read_struct_2 + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn, (png_voidp) + user_mem_ptr, user_malloc_fn, user_free_fn); + +The error handling routines passed to png_create_read_struct() +and the memory alloc/free routines passed to png_create_struct_2() +are only necessary if you are not using the libpng supplied error +handling and memory alloc/free functions. + +When libpng encounters an error, it expects to longjmp back +to your routine. Therefore, you will need to call setjmp and pass +your png_jmpbuf(png_ptr). If you read the file from different +routines, you will need to update the longjmp buffer every time you enter +a new routine that will call a png_*() function. + +See your documentation of setjmp/longjmp for your compiler for more +information on setjmp/longjmp. See the discussion on libpng error +handling in the Customizing Libpng section below for more information +on the libpng error handling. If an error occurs, and libpng longjmp's +back to your setjmp, you will want to call png_destroy_read_struct() to +free any memory. + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + &end_info); + fclose(fp); + return (ERROR); + } + +Pass (png_infopp)NULL instead of &end_info if you didn't create +an end_info structure. + +If you would rather avoid the complexity of setjmp/longjmp issues, +you can compile libpng with PNG_NO_SETJMP, in which case +errors will result in a call to PNG_ABORT() which defaults to abort(). + +You can #define PNG_ABORT() to a function that does something +more useful than abort(), as long as your function does not +return. + +Now you need to set up the input code. The default for libpng is to +use the C function fread(). If you use this, you will need to pass a +valid FILE * in the function png_init_io(). Be sure that the file is +opened in binary mode. If you wish to handle reading data in another +way, you need not call the png_init_io() function, but you must then +implement the libpng I/O methods discussed in the Customizing Libpng +section below. + + png_init_io(png_ptr, fp); + +If you had previously opened the file and read any of the signature from +the beginning in order to see if this was a PNG file, you need to let +libpng know that there are some bytes missing from the start of the file. + + png_set_sig_bytes(png_ptr, number); + +You can change the zlib compression buffer size to be used while +reading compressed data with + + png_set_compression_buffer_size(png_ptr, buffer_size); + +where the default size is 8192 bytes. Note that the buffer size +is changed immediately and the buffer is reallocated immediately, +instead of setting a flag to be acted upon later. + +If you want CRC errors to be handled in a different manner than +the default, use + + png_set_crc_action(png_ptr, crit_action, ancil_action); + +The values for png_set_crc_action() say how libpng is to handle CRC errors in +ancillary and critical chunks, and whether to use the data contained +therein. Note that it is impossible to "discard" data in a critical +chunk. + +Choices for (int) crit_action are + PNG_CRC_DEFAULT 0 error/quit + PNG_CRC_ERROR_QUIT 1 error/quit + PNG_CRC_WARN_USE 3 warn/use data + PNG_CRC_QUIET_USE 4 quiet/use data + PNG_CRC_NO_CHANGE 5 use the current value + +Choices for (int) ancil_action are + PNG_CRC_DEFAULT 0 error/quit + PNG_CRC_ERROR_QUIT 1 error/quit + PNG_CRC_WARN_DISCARD 2 warn/discard data + PNG_CRC_WARN_USE 3 warn/use data + PNG_CRC_QUIET_USE 4 quiet/use data + PNG_CRC_NO_CHANGE 5 use the current value + +Setting up callback code + +You can set up a callback function to handle any unknown chunks in the +input stream. You must supply the function + + read_chunk_callback(png_structp png_ptr, + png_unknown_chunkp chunk); + { + /* The unknown chunk structure contains your + chunk data, along with similar data for any other + unknown chunks: */ + + png_byte name[5]; + png_byte *data; + png_size_t size; + + /* Note that libpng has already taken care of + the CRC handling */ + + /* put your code here. Search for your chunk in the + unknown chunk structure, process it, and return one + of the following: */ + + return (-n); /* chunk had an error */ + return (0); /* did not recognize */ + return (n); /* success */ + } + +(You can give your function another name that you like instead of +"read_chunk_callback") + +To inform libpng about your function, use + + png_set_read_user_chunk_fn(png_ptr, user_chunk_ptr, + read_chunk_callback); + +This names not only the callback function, but also a user pointer that +you can retrieve with + + png_get_user_chunk_ptr(png_ptr); + +If you call the png_set_read_user_chunk_fn() function, then all unknown +chunks which the callback does not handle will be saved when read. You can +cause them to be discarded by returning '1' ("handled") instead of '0'. This +behavior will change in libpng 1.7 and the default handling set by the +png_set_keep_unknown_chunks() function, described below, will be used when the +callback returns 0. If you want the existing behavior you should set the global +default to PNG_HANDLE_CHUNK_IF_SAFE now; this is compatible with all current +versions of libpng and with 1.7. Libpng 1.6 issues a warning if you keep the +default, or PNG_HANDLE_CHUNK_NEVER, and the callback returns 0. + +At this point, you can set up a callback function that will be +called after each row has been read, which you can use to control +a progress meter or the like. It's demonstrated in pngtest.c. +You must supply a function + + void read_row_callback(png_structp png_ptr, + png_uint_32 row, int pass); + { + /* put your code here */ + } + +(You can give it another name that you like instead of "read_row_callback") + +To inform libpng about your function, use + + png_set_read_status_fn(png_ptr, read_row_callback); + +When this function is called the row has already been completely processed and +the 'row' and 'pass' refer to the next row to be handled. For the +non-interlaced case the row that was just handled is simply one less than the +passed in row number, and pass will always be 0. For the interlaced case the +same applies unless the row value is 0, in which case the row just handled was +the last one from one of the preceding passes. Because interlacing may skip a +pass you cannot be sure that the preceding pass is just 'pass-1', if you really +need to know what the last pass is record (row,pass) from the callback and use +the last recorded value each time. + +As with the user transform you can find the output row using the +PNG_ROW_FROM_PASS_ROW macro. + +Unknown-chunk handling + +Now you get to set the way the library processes unknown chunks in the +input PNG stream. Both known and unknown chunks will be read. Normal +behavior is that known chunks will be parsed into information in +various info_ptr members while unknown chunks will be discarded. This +behavior can be wasteful if your application will never use some known +chunk types. To change this, you can call: + + png_set_keep_unknown_chunks(png_ptr, keep, + chunk_list, num_chunks); + + keep - 0: default unknown chunk handling + 1: ignore; do not keep + 2: keep only if safe-to-copy + 3: keep even if unsafe-to-copy + + You can use these definitions: + PNG_HANDLE_CHUNK_AS_DEFAULT 0 + PNG_HANDLE_CHUNK_NEVER 1 + PNG_HANDLE_CHUNK_IF_SAFE 2 + PNG_HANDLE_CHUNK_ALWAYS 3 + + chunk_list - list of chunks affected (a byte string, + five bytes per chunk, NULL or '\0' if + num_chunks is positive; ignored if + numchunks <= 0). + + num_chunks - number of chunks affected; if 0, all + unknown chunks are affected. If positive, + only the chunks in the list are affected, + and if negative all unknown chunks and + all known chunks except for the IHDR, + PLTE, tRNS, IDAT, and IEND chunks are + affected. + +Unknown chunks declared in this way will be saved as raw data onto a +list of png_unknown_chunk structures. If a chunk that is normally +known to libpng is named in the list, it will be handled as unknown, +according to the "keep" directive. If a chunk is named in successive +instances of png_set_keep_unknown_chunks(), the final instance will +take precedence. The IHDR and IEND chunks should not be named in +chunk_list; if they are, libpng will process them normally anyway. +If you know that your application will never make use of some particular +chunks, use PNG_HANDLE_CHUNK_NEVER (or 1) as demonstrated below. + +Here is an example of the usage of png_set_keep_unknown_chunks(), +where the private "vpAg" chunk will later be processed by a user chunk +callback function: + + png_byte vpAg[5]={118, 112, 65, 103, (png_byte) '\0'}; + + #if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) + png_byte unused_chunks[]= + { + 104, 73, 83, 84, (png_byte) '\0', /* hIST */ + 105, 84, 88, 116, (png_byte) '\0', /* iTXt */ + 112, 67, 65, 76, (png_byte) '\0', /* pCAL */ + 115, 67, 65, 76, (png_byte) '\0', /* sCAL */ + 115, 80, 76, 84, (png_byte) '\0', /* sPLT */ + 116, 73, 77, 69, (png_byte) '\0', /* tIME */ + }; + #endif + + ... + + #if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) + /* ignore all unknown chunks + * (use global setting "2" for libpng16 and earlier): + */ + png_set_keep_unknown_chunks(read_ptr, 2, NULL, 0); + + /* except for vpAg: */ + png_set_keep_unknown_chunks(read_ptr, 2, vpAg, 1); + + /* also ignore unused known chunks: */ + png_set_keep_unknown_chunks(read_ptr, 1, unused_chunks, + (int)(sizeof unused_chunks)/5); + #endif + +User limits + +The PNG specification allows the width and height of an image to be as +large as 2^31-1 (0x7fffffff), or about 2.147 billion rows and columns. +Since very few applications really need to process such large images, +we have imposed an arbitrary 1-million limit on rows and columns. +Larger images will be rejected immediately with a png_error() call. If +you wish to change this limit, you can use + + png_set_user_limits(png_ptr, width_max, height_max); + +to set your own limits, or use width_max = height_max = 0x7fffffffL +to allow all valid dimensions (libpng may reject some very large images +anyway because of potential buffer overflow conditions). + +You should put this statement after you create the PNG structure and +before calling png_read_info(), png_read_png(), or png_process_data(). + +When writing a PNG datastream, put this statement before calling +png_write_info() or png_write_png(). + +If you need to retrieve the limits that are being applied, use + + width_max = png_get_user_width_max(png_ptr); + height_max = png_get_user_height_max(png_ptr); + +The PNG specification sets no limit on the number of ancillary chunks +allowed in a PNG datastream. You can impose a limit on the total number +of sPLT, tEXt, iTXt, zTXt, and unknown chunks that will be stored, with + + png_set_chunk_cache_max(png_ptr, user_chunk_cache_max); + +where 0x7fffffffL means unlimited. You can retrieve this limit with + + chunk_cache_max = png_get_chunk_cache_max(png_ptr); + +You can also set a limit on the amount of memory that a compressed chunk +other than IDAT can occupy, with + + png_set_chunk_malloc_max(png_ptr, user_chunk_malloc_max); + +and you can retrieve the limit with + + chunk_malloc_max = png_get_chunk_malloc_max(png_ptr); + +Any chunks that would cause either of these limits to be exceeded will +be ignored. + +Information about your system + +If you intend to display the PNG or to incorporate it in other image data you +need to tell libpng information about your display or drawing surface so that +libpng can convert the values in the image to match the display. + +From libpng-1.5.4 this information can be set before reading the PNG file +header. In earlier versions png_set_gamma() existed but behaved incorrectly if +called before the PNG file header had been read and png_set_alpha_mode() did not +exist. + +If you need to support versions prior to libpng-1.5.4 test the version number +as illustrated below using "PNG_LIBPNG_VER >= 10504" and follow the procedures +described in the appropriate manual page. + +You give libpng the encoding expected by your system expressed as a 'gamma' +value. You can also specify a default encoding for the PNG file in +case the required information is missing from the file. By default libpng +assumes that the PNG data matches your system, to keep this default call: + + png_set_gamma(png_ptr, screen_gamma, 1/screen_gamma/*file gamma*/); + +or you can use the fixed point equivalent: + + png_set_gamma_fixed(png_ptr, PNG_FP_1*screen_gamma, + PNG_FP_1/screen_gamma); + +If you don't know the gamma for your system it is probably 2.2 - a good +approximation to the IEC standard for display systems (sRGB). If images are +too contrasty or washed out you got the value wrong - check your system +documentation! + +Many systems permit the system gamma to be changed via a lookup table in the +display driver, a few systems, including older Macs, change the response by +default. As of 1.5.4 three special values are available to handle common +situations: + + PNG_DEFAULT_sRGB: Indicates that the system conforms to the + IEC 61966-2-1 standard. This matches almost + all systems. + PNG_GAMMA_MAC_18: Indicates that the system is an older + (pre Mac OS 10.6) Apple Macintosh system with + the default settings. + PNG_GAMMA_LINEAR: Just the fixed point value for 1.0 - indicates + that the system expects data with no gamma + encoding. + +You would use the linear (unencoded) value if you need to process the pixel +values further because this avoids the need to decode and reencode each +component value whenever arithmetic is performed. A lot of graphics software +uses linear values for this reason, often with higher precision component values +to preserve overall accuracy. + +The second thing you may need to tell libpng about is how your system handles +alpha channel information. Some, but not all, PNG files contain an alpha +channel. To display these files correctly you need to compose the data onto a +suitable background, as described in the PNG specification. + +Libpng only supports composing onto a single color (using png_set_background; +see below). Otherwise you must do the composition yourself and, in this case, +you may need to call png_set_alpha_mode: + + #if PNG_LIBPNG_VER >= 10504 + png_set_alpha_mode(png_ptr, mode, screen_gamma); + #else + png_set_gamma(png_ptr, screen_gamma, 1.0/screen_gamma); + #endif + +The screen_gamma value is the same as the argument to png_set_gamma; however, +how it affects the output depends on the mode. png_set_alpha_mode() sets the +file gamma default to 1/screen_gamma, so normally you don't need to call +png_set_gamma. If you need different defaults call png_set_gamma() before +png_set_alpha_mode() - if you call it after it will override the settings made +by png_set_alpha_mode(). + +The mode is as follows: + + PNG_ALPHA_PNG: The data is encoded according to the PNG specification. Red, +green and blue, or gray, components are gamma encoded color +values and are not premultiplied by the alpha value. The +alpha value is a linear measure of the contribution of the +pixel to the corresponding final output pixel. + +You should normally use this format if you intend to perform +color correction on the color values; most, maybe all, color +correction software has no handling for the alpha channel and, +anyway, the math to handle pre-multiplied component values is +unnecessarily complex. + +Before you do any arithmetic on the component values you need +to remove the gamma encoding and multiply out the alpha +channel. See the PNG specification for more detail. It is +important to note that when an image with an alpha channel is +scaled, linear encoded, pre-multiplied component values must +be used! + +The remaining modes assume you don't need to do any further color correction or +that if you do, your color correction software knows all about alpha (it +probably doesn't!) + + PNG_ALPHA_STANDARD: The data libpng produces +is encoded in the standard way +assumed by most correctly written graphics software. +The gamma encoding will be removed by libpng and the +linear component values will be pre-multiplied by the +alpha channel. + +With this format the final image must be re-encoded to +match the display gamma before the image is displayed. +If your system doesn't do that, yet still seems to +perform arithmetic on the pixels without decoding them, +it is broken - check out the modes below. + +With PNG_ALPHA_STANDARD libpng always produces linear +component values, whatever screen_gamma you supply. The +screen_gamma value is, however, used as a default for +the file gamma if the PNG file has no gamma information. + +If you call png_set_gamma() after png_set_alpha_mode() you +will override the linear encoding. Instead the +pre-multiplied pixel values will be gamma encoded but +the alpha channel will still be linear. This may +actually match the requirements of some broken software, +but it is unlikely. + +While linear 8-bit data is often used it has +insufficient precision for any image with a reasonable +dynamic range. To avoid problems, and if your software +supports it, use png_set_expand_16() to force all +components to 16 bits. + + PNG_ALPHA_OPTIMIZED: This mode is the same +as PNG_ALPHA_STANDARD except that +completely opaque pixels are gamma encoded according to +the screen_gamma value. Pixels with alpha less than 1.0 +will still have linear components. + +Use this format if you have control over your +compositing software and so don't do other arithmetic +(such as scaling) on the data you get from libpng. Your +compositing software can simply copy opaque pixels to +the output but still has linear values for the +non-opaque pixels. + +In normal compositing, where the alpha channel encodes +partial pixel coverage (as opposed to broad area +translucency), the inaccuracies of the 8-bit +representation of non-opaque pixels are irrelevant. + +You can also try this format if your software is broken; +it might look better. + + PNG_ALPHA_BROKEN: This is PNG_ALPHA_STANDARD; +however, all component values, +including the alpha channel are gamma encoded. This is +an appropriate format to try if your software, or more +likely hardware, is totally broken, i.e., if it performs +linear arithmetic directly on gamma encoded values. + +In most cases of broken software or hardware the bug in the final display +manifests as a subtle halo around composited parts of the image. You may not +even perceive this as a halo; the composited part of the image may simply appear +separate from the background, as though it had been cut out of paper and pasted +on afterward. + +If you don't have to deal with bugs in software or hardware, or if you can fix +them, there are three recommended ways of using png_set_alpha_mode(): + + png_set_alpha_mode(png_ptr, PNG_ALPHA_PNG, + screen_gamma); + +You can do color correction on the result (libpng does not currently +support color correction internally). When you handle the alpha channel +you need to undo the gamma encoding and multiply out the alpha. + + png_set_alpha_mode(png_ptr, PNG_ALPHA_STANDARD, + screen_gamma); + png_set_expand_16(png_ptr); + +If you are using the high level interface, don't call png_set_expand_16(); +instead pass PNG_TRANSFORM_EXPAND_16 to the interface. + +With this mode you can't do color correction, but you can do arithmetic, +including composition and scaling, on the data without further processing. + + png_set_alpha_mode(png_ptr, PNG_ALPHA_OPTIMIZED, + screen_gamma); + +You can avoid the expansion to 16-bit components with this mode, but you +lose the ability to scale the image or perform other linear arithmetic. +All you can do is compose the result onto a matching output. Since this +mode is libpng-specific you also need to write your own composition +software. + +If you don't need, or can't handle, the alpha channel you can call +png_set_background() to remove it by compositing against a fixed color. Don't +call png_set_strip_alpha() to do this - it will leave spurious pixel values in +transparent parts of this image. + + png_set_background(png_ptr, &background_color, + PNG_BACKGROUND_GAMMA_SCREEN, 0, 1); + +The background_color is an RGB or grayscale value according to the data format +libpng will produce for you. Because you don't yet know the format of the PNG +file, if you call png_set_background at this point you must arrange for the +format produced by libpng to always have 8-bit or 16-bit components and then +store the color as an 8-bit or 16-bit color as appropriate. The color contains +separate gray and RGB component values, so you can let libpng produce gray or +RGB output according to the input format, but low bit depth grayscale images +must always be converted to at least 8-bit format. (Even though low bit depth +grayscale images can't have an alpha channel they can have a transparent +color!) + +You set the transforms you need later, either as flags to the high level +interface or libpng API calls for the low level interface. For reference the +settings and API calls required are: + +8-bit values: + PNG_TRANSFORM_SCALE_16 | PNG_EXPAND + png_set_expand(png_ptr); png_set_scale_16(png_ptr); + + If you must get exactly the same inaccurate results + produced by default in versions prior to libpng-1.5.4, + use PNG_TRANSFORM_STRIP_16 and png_set_strip_16(png_ptr) + instead. + +16-bit values: + PNG_TRANSFORM_EXPAND_16 + png_set_expand_16(png_ptr); + +In either case palette image data will be expanded to RGB. If you just want +color data you can add PNG_TRANSFORM_GRAY_TO_RGB or png_set_gray_to_rgb(png_ptr) +to the list. + +Calling png_set_background before the PNG file header is read will not work +prior to libpng-1.5.4. Because the failure may result in unexpected warnings or +errors it is therefore much safer to call png_set_background after the head has +been read. Unfortunately this means that prior to libpng-1.5.4 it cannot be +used with the high level interface. + +The high-level read interface + +At this point there are two ways to proceed; through the high-level +read interface, or through a sequence of low-level read operations. +You can use the high-level interface if (a) you are willing to read +the entire image into memory, and (b) the input transformations +you want to do are limited to the following set: + + PNG_TRANSFORM_IDENTITY No transformation + PNG_TRANSFORM_SCALE_16 Strip 16-bit samples to + 8-bit accurately + PNG_TRANSFORM_STRIP_16 Chop 16-bit samples to + 8-bit less accurately + PNG_TRANSFORM_STRIP_ALPHA Discard the alpha channel + PNG_TRANSFORM_PACKING Expand 1, 2 and 4-bit + samples to bytes + PNG_TRANSFORM_PACKSWAP Change order of packed + pixels to LSB first + PNG_TRANSFORM_EXPAND Perform set_expand() + PNG_TRANSFORM_INVERT_MONO Invert monochrome images + PNG_TRANSFORM_SHIFT Normalize pixels to the + sBIT depth + PNG_TRANSFORM_BGR Flip RGB to BGR, RGBA + to BGRA + PNG_TRANSFORM_SWAP_ALPHA Flip RGBA to ARGB or GA + to AG + PNG_TRANSFORM_INVERT_ALPHA Change alpha from opacity + to transparency + PNG_TRANSFORM_SWAP_ENDIAN Byte-swap 16-bit samples + PNG_TRANSFORM_GRAY_TO_RGB Expand grayscale samples + to RGB (or GA to RGBA) + PNG_TRANSFORM_EXPAND_16 Expand samples to 16 bits + +(This excludes setting a background color, doing gamma transformation, +quantizing, and setting filler.) If this is the case, simply do this: + + png_read_png(png_ptr, info_ptr, png_transforms, NULL) + +where png_transforms is an integer containing the bitwise OR of some +set of transformation flags. This call is equivalent to png_read_info(), +followed the set of transformations indicated by the transform mask, +then png_read_image(), and finally png_read_end(). + +(The final parameter of this call is not yet used. Someday it might point +to transformation parameters required by some future input transform.) + +You must use png_transforms and not call any png_set_transform() functions +when you use png_read_png(). + +After you have called png_read_png(), you can retrieve the image data +with + + row_pointers = png_get_rows(png_ptr, info_ptr); + +where row_pointers is an array of pointers to the pixel data for each row: + + png_bytep row_pointers[height]; + +If you know your image size and pixel size ahead of time, you can allocate +row_pointers prior to calling png_read_png() with + + if (height > PNG_UINT_32_MAX/(sizeof (png_byte))) + png_error (png_ptr, + "Image is too tall to process in memory"); + + if (width > PNG_UINT_32_MAX/pixel_size) + png_error (png_ptr, + "Image is too wide to process in memory"); + + row_pointers = png_malloc(png_ptr, + height*(sizeof (png_bytep))); + + for (int i=0; i) and +png_get_(png_ptr, info_ptr, ...) functions return non-zero if the +data has been read, or zero if it is missing. The parameters to the +png_get_ are set directly if they are simple data types, or a +pointer into the info_ptr is returned for any complex types. + +The colorspace data from gAMA, cHRM, sRGB, iCCP, and sBIT chunks +is simply returned to give the application information about how the +image was encoded. Libpng itself only does transformations using the file +gamma when combining semitransparent pixels with the background color, and, +since libpng-1.6.0, when converting between 8-bit sRGB and 16-bit linear pixels +within the simplified API. Libpng also uses the file gamma when converting +RGB to gray, beginning with libpng-1.0.5, if the application calls +png_set_rgb_to_gray()). + + png_get_PLTE(png_ptr, info_ptr, &palette, + &num_palette); + + palette - the palette for the file + (array of png_color) + + num_palette - number of entries in the palette + + png_get_gAMA(png_ptr, info_ptr, &file_gamma); + png_get_gAMA_fixed(png_ptr, info_ptr, &int_file_gamma); + + file_gamma - the gamma at which the file is + written (PNG_INFO_gAMA) + + int_file_gamma - 100,000 times the gamma at which the + file is written + + png_get_cHRM(png_ptr, info_ptr, &white_x, &white_y, &red_x, + &red_y, &green_x, &green_y, &blue_x, &blue_y) + png_get_cHRM_XYZ(png_ptr, info_ptr, &red_X, &red_Y, &red_Z, + &green_X, &green_Y, &green_Z, &blue_X, &blue_Y, + &blue_Z) + png_get_cHRM_fixed(png_ptr, info_ptr, &int_white_x, + &int_white_y, &int_red_x, &int_red_y, + &int_green_x, &int_green_y, &int_blue_x, + &int_blue_y) + png_get_cHRM_XYZ_fixed(png_ptr, info_ptr, &int_red_X, &int_red_Y, + &int_red_Z, &int_green_X, &int_green_Y, + &int_green_Z, &int_blue_X, &int_blue_Y, + &int_blue_Z) + + {white,red,green,blue}_{x,y} + A color space encoding specified using the + chromaticities of the end points and the + white point. (PNG_INFO_cHRM) + + {red,green,blue}_{X,Y,Z} + A color space encoding specified using the + encoding end points - the CIE tristimulus + specification of the intended color of the red, + green and blue channels in the PNG RGB data. + The white point is simply the sum of the three + end points. (PNG_INFO_cHRM) + + png_get_sRGB(png_ptr, info_ptr, &srgb_intent); + + file_srgb_intent - the rendering intent (PNG_INFO_sRGB) + The presence of the sRGB chunk + means that the pixel data is in the + sRGB color space. This chunk also + implies specific values of gAMA and + cHRM. + + png_get_iCCP(png_ptr, info_ptr, &name, + &compression_type, &profile, &proflen); + + name - The profile name. + + compression_type - The compression type; always + PNG_COMPRESSION_TYPE_BASE for PNG 1.0. + You may give NULL to this argument to + ignore it. + + profile - International Color Consortium color + profile data. May contain NULs. + + proflen - length of profile data in bytes. + + png_get_sBIT(png_ptr, info_ptr, &sig_bit); + + sig_bit - the number of significant bits for + (PNG_INFO_sBIT) each of the gray, + red, green, and blue channels, + whichever are appropriate for the + given color type (png_color_16) + + png_get_tRNS(png_ptr, info_ptr, &trans_alpha, + &num_trans, &trans_color); + + trans_alpha - array of alpha (transparency) + entries for palette (PNG_INFO_tRNS) + + num_trans - number of transparent entries + (PNG_INFO_tRNS) + + trans_color - graylevel or color sample values of + the single transparent color for + non-paletted images (PNG_INFO_tRNS) + + png_get_hIST(png_ptr, info_ptr, &hist); + (PNG_INFO_hIST) + + hist - histogram of palette (array of + png_uint_16) + + png_get_tIME(png_ptr, info_ptr, &mod_time); + + mod_time - time image was last modified + (PNG_VALID_tIME) + + png_get_bKGD(png_ptr, info_ptr, &background); + + background - background color (of type + png_color_16p) (PNG_VALID_bKGD) + valid 16-bit red, green and blue + values, regardless of color_type + + num_comments = png_get_text(png_ptr, info_ptr, + &text_ptr, &num_text); + + num_comments - number of comments + + text_ptr - array of png_text holding image + comments + + text_ptr[i].compression - type of compression used + on "text" PNG_TEXT_COMPRESSION_NONE + PNG_TEXT_COMPRESSION_zTXt + PNG_ITXT_COMPRESSION_NONE + PNG_ITXT_COMPRESSION_zTXt + + text_ptr[i].key - keyword for comment. Must contain + 1-79 characters. + + text_ptr[i].text - text comments for current + keyword. Can be empty. + + text_ptr[i].text_length - length of text string, + after decompression, 0 for iTXt + + text_ptr[i].itxt_length - length of itxt string, + after decompression, 0 for tEXt/zTXt + + text_ptr[i].lang - language of comment (empty + string for unknown). + + text_ptr[i].lang_key - keyword in UTF-8 + (empty string for unknown). + + Note that the itxt_length, lang, and lang_key + members of the text_ptr structure only exist when the + library is built with iTXt chunk support. Prior to + libpng-1.4.0 the library was built by default without + iTXt support. Also note that when iTXt is supported, + they contain NULL pointers when the "compression" + field contains PNG_TEXT_COMPRESSION_NONE or + PNG_TEXT_COMPRESSION_zTXt. + + num_text - number of comments (same as + num_comments; you can put NULL here + to avoid the duplication) + + Note while png_set_text() will accept text, language, + and translated keywords that can be NULL pointers, the + structure returned by png_get_text will always contain + regular zero-terminated C strings. They might be + empty strings but they will never be NULL pointers. + + num_spalettes = png_get_sPLT(png_ptr, info_ptr, + &palette_ptr); + + num_spalettes - number of sPLT chunks read. + + palette_ptr - array of palette structures holding + contents of one or more sPLT chunks + read. + + png_get_oFFs(png_ptr, info_ptr, &offset_x, &offset_y, + &unit_type); + + offset_x - positive offset from the left edge + of the screen (can be negative) + + offset_y - positive offset from the top edge + of the screen (can be negative) + + unit_type - PNG_OFFSET_PIXEL, PNG_OFFSET_MICROMETER + + png_get_pHYs(png_ptr, info_ptr, &res_x, &res_y, + &unit_type); + + res_x - pixels/unit physical resolution in + x direction + + res_y - pixels/unit physical resolution in + x direction + + unit_type - PNG_RESOLUTION_UNKNOWN, + PNG_RESOLUTION_METER + + png_get_sCAL(png_ptr, info_ptr, &unit, &width, + &height) + + unit - physical scale units (an integer) + + width - width of a pixel in physical scale units + + height - height of a pixel in physical scale units + (width and height are doubles) + + png_get_sCAL_s(png_ptr, info_ptr, &unit, &width, + &height) + + unit - physical scale units (an integer) + + width - width of a pixel in physical scale units + (expressed as a string) + + height - height of a pixel in physical scale units + (width and height are strings like "2.54") + + num_unknown_chunks = png_get_unknown_chunks(png_ptr, + info_ptr, &unknowns) + + unknowns - array of png_unknown_chunk + structures holding unknown chunks + + unknowns[i].name - name of unknown chunk + + unknowns[i].data - data of unknown chunk + + unknowns[i].size - size of unknown chunk's data + + unknowns[i].location - position of chunk in file + + The value of "i" corresponds to the order in which the + chunks were read from the PNG file or inserted with the + png_set_unknown_chunks() function. + + The value of "location" is a bitwise "or" of + + PNG_HAVE_IHDR (0x01) + PNG_HAVE_PLTE (0x02) + PNG_AFTER_IDAT (0x08) + +The data from the pHYs chunk can be retrieved in several convenient +forms: + + res_x = png_get_x_pixels_per_meter(png_ptr, + info_ptr) + + res_y = png_get_y_pixels_per_meter(png_ptr, + info_ptr) + + res_x_and_y = png_get_pixels_per_meter(png_ptr, + info_ptr) + + res_x = png_get_x_pixels_per_inch(png_ptr, + info_ptr) + + res_y = png_get_y_pixels_per_inch(png_ptr, + info_ptr) + + res_x_and_y = png_get_pixels_per_inch(png_ptr, + info_ptr) + + aspect_ratio = png_get_pixel_aspect_ratio(png_ptr, + info_ptr) + + Each of these returns 0 [signifying "unknown"] if + the data is not present or if res_x is 0; + res_x_and_y is 0 if res_x != res_y + + Note that because of the way the resolutions are + stored internally, the inch conversions won't + come out to exactly even number. For example, + 72 dpi is stored as 0.28346 pixels/meter, and + when this is retrieved it is 71.9988 dpi, so + be sure to round the returned value appropriately + if you want to display a reasonable-looking result. + +The data from the oFFs chunk can be retrieved in several convenient +forms: + + x_offset = png_get_x_offset_microns(png_ptr, info_ptr); + + y_offset = png_get_y_offset_microns(png_ptr, info_ptr); + + x_offset = png_get_x_offset_inches(png_ptr, info_ptr); + + y_offset = png_get_y_offset_inches(png_ptr, info_ptr); + + Each of these returns 0 [signifying "unknown" if both + x and y are 0] if the data is not present or if the + chunk is present but the unit is the pixel. The + remark about inexact inch conversions applies here + as well, because a value in inches can't always be + converted to microns and back without some loss + of precision. + +For more information, see the +PNG specification for chunk contents. Be careful with trusting +rowbytes, as some of the transformations could increase the space +needed to hold a row (expand, filler, gray_to_rgb, etc.). +See png_read_update_info(), below. + +A quick word about text_ptr and num_text. PNG stores comments in +keyword/text pairs, one pair per chunk, with no limit on the number +of text chunks, and a 2^31 byte limit on their size. While there are +suggested keywords, there is no requirement to restrict the use to these +strings. It is strongly suggested that keywords and text be sensible +to humans (that's the point), so don't use abbreviations. Non-printing +symbols are not allowed. See the PNG specification for more details. +There is also no requirement to have text after the keyword. + +Keywords should be limited to 79 Latin-1 characters without leading or +trailing spaces, but non-consecutive spaces are allowed within the +keyword. It is possible to have the same keyword any number of times. +The text_ptr is an array of png_text structures, each holding a +pointer to a language string, a pointer to a keyword and a pointer to +a text string. The text string, language code, and translated +keyword may be empty or NULL pointers. The keyword/text +pairs are put into the array in the order that they are received. +However, some or all of the text chunks may be after the image, so, to +make sure you have read all the text chunks, don't mess with these +until after you read the stuff after the image. This will be +mentioned again below in the discussion that goes with png_read_end(). + +Input transformations + +After you've read the header information, you can set up the library +to handle any special transformations of the image data. The various +ways to transform the data will be described in the order that they +should occur. This is important, as some of these change the color +type and/or bit depth of the data, and some others only work on +certain color types and bit depths. + +Transformations you request are ignored if they don't have any meaning for a +particular input data format. However some transformations can have an effect +as a result of a previous transformation. If you specify a contradictory set of +transformations, for example both adding and removing the alpha channel, you +cannot predict the final result. + +The color used for the transparency values should be supplied in the same +format/depth as the current image data. It is stored in the same format/depth +as the image data in a tRNS chunk, so this is what libpng expects for this data. + +The color used for the background value depends on the need_expand argument as +described below. + +Data will be decoded into the supplied row buffers packed into bytes +unless the library has been told to transform it into another format. +For example, 4 bit/pixel paletted or grayscale data will be returned +2 pixels/byte with the leftmost pixel in the high-order bits of the +byte, unless png_set_packing() is called. 8-bit RGB data will be stored +in RGB RGB RGB format unless png_set_filler() or png_set_add_alpha() +is called to insert filler bytes, either before or after each RGB triplet. +16-bit RGB data will be returned RRGGBB RRGGBB, with the most significant +byte of the color value first, unless png_set_scale_16() is called to +transform it to regular RGB RGB triplets, or png_set_filler() or +png_set_add alpha() is called to insert filler bytes, either before or +after each RRGGBB triplet. Similarly, 8-bit or 16-bit grayscale data can +be modified with png_set_filler(), png_set_add_alpha(), png_set_strip_16(), +or png_set_scale_16(). + +The following code transforms grayscale images of less than 8 to 8 bits, +changes paletted images to RGB, and adds a full alpha channel if there is +transparency information in a tRNS chunk. This is most useful on +grayscale images with bit depths of 2 or 4 or if there is a multiple-image +viewing application that wishes to treat all images in the same way. + + if (color_type == PNG_COLOR_TYPE_PALETTE) + png_set_palette_to_rgb(png_ptr); + + if (png_get_valid(png_ptr, info_ptr, + PNG_INFO_tRNS)) png_set_tRNS_to_alpha(png_ptr); + + if (color_type == PNG_COLOR_TYPE_GRAY && + bit_depth < 8) png_set_expand_gray_1_2_4_to_8(png_ptr); + +The first two functions are actually aliases for png_set_expand(), added +in libpng version 1.0.4, with the function names expanded to improve code +readability. In some future version they may actually do different +things. + +As of libpng version 1.2.9, png_set_expand_gray_1_2_4_to_8() was +added. It expands the sample depth without changing tRNS to alpha. + +As of libpng version 1.5.2, png_set_expand_16() was added. It behaves as +png_set_expand(); however, the resultant channels have 16 bits rather than 8. +Use this when the output color or gray channels are made linear to avoid fairly +severe accuracy loss. + + if (bit_depth < 16) + png_set_expand_16(png_ptr); + +PNG can have files with 16 bits per channel. If you only can handle +8 bits per channel, this will strip the pixels down to 8-bit. + + if (bit_depth == 16) +#if PNG_LIBPNG_VER >= 10504 + png_set_scale_16(png_ptr); +#else + png_set_strip_16(png_ptr); +#endif + +(The more accurate "png_set_scale_16()" API became available in libpng version +1.5.4). + +If you need to process the alpha channel on the image separately from the image +data (for example if you convert it to a bitmap mask) it is possible to have +libpng strip the channel leaving just RGB or gray data: + + if (color_type & PNG_COLOR_MASK_ALPHA) + png_set_strip_alpha(png_ptr); + +If you strip the alpha channel you need to find some other way of dealing with +the information. If, instead, you want to convert the image to an opaque +version with no alpha channel use png_set_background; see below. + +As of libpng version 1.5.2, almost all useful expansions are supported, the +major ommissions are conversion of grayscale to indexed images (which can be +done trivially in the application) and conversion of indexed to grayscale (which +can be done by a trivial manipulation of the palette.) + +In the following table, the 01 means grayscale with depth<8, 31 means +indexed with depth<8, other numerals represent the color type, "T" means +the tRNS chunk is present, A means an alpha channel is present, and O +means tRNS or alpha is present but all pixels in the image are opaque. + + FROM 01 31 0 0T 0O 2 2T 2O 3 3T 3O 4A 4O 6A 6O + TO + 01 - [G] - - - - - - - - - - - - - + 31 [Q] Q [Q] [Q] [Q] Q Q Q Q Q Q [Q] [Q] Q Q + 0 1 G + . . G G G G G G B B GB GB + 0T lt Gt t + . Gt G G Gt G G Bt Bt GBt GBt + 0O lt Gt t . + Gt Gt G Gt Gt G Bt Bt GBt GBt + 2 C P C C C + . . C - - CB CB B B + 2T Ct - Ct C C t + t - - - CBt CBt Bt Bt + 2O Ct - Ct C C t t + - - - CBt CBt Bt Bt + 3 [Q] p [Q] [Q] [Q] Q Q Q + . . [Q] [Q] Q Q + 3T [Qt] p [Qt][Q] [Q] Qt Qt Qt t + t [Qt][Qt] Qt Qt + 3O [Qt] p [Qt][Q] [Q] Qt Qt Qt t t + [Qt][Qt] Qt Qt + 4A lA G A T T GA GT GT GA GT GT + BA G GBA + 4O lA GBA A T T GA GT GT GA GT GT BA + GBA G + 6A CA PA CA C C A T tT PA P P C CBA + BA + 6O CA PBA CA C C A tT T PA P P CBA C BA + + +Within the matrix, + "+" identifies entries where 'from' and 'to' are the same. + "-" means the transformation is not supported. + "." means nothing is necessary (a tRNS chunk can just be ignored). + "t" means the transformation is obtained by png_set_tRNS. + "A" means the transformation is obtained by png_set_add_alpha(). + "X" means the transformation is obtained by png_set_expand(). + "1" means the transformation is obtained by + png_set_expand_gray_1_2_4_to_8() (and by png_set_expand() + if there is no transparency in the original or the final + format). + "C" means the transformation is obtained by png_set_gray_to_rgb(). + "G" means the transformation is obtained by png_set_rgb_to_gray(). + "P" means the transformation is obtained by + png_set_expand_palette_to_rgb(). + "p" means the transformation is obtained by png_set_packing(). + "Q" means the transformation is obtained by png_set_quantize(). + "T" means the transformation is obtained by + png_set_tRNS_to_alpha(). + "B" means the transformation is obtained by + png_set_background(), or png_strip_alpha(). + +When an entry has multiple transforms listed all are required to cause the +right overall transformation. When two transforms are separated by a comma +either will do the job. When transforms are enclosed in [] the transform should +do the job but this is currently unimplemented - a different format will result +if the suggested transformations are used. + +In PNG files, the alpha channel in an image +is the level of opacity. If you need the alpha channel in an image to +be the level of transparency instead of opacity, you can invert the +alpha channel (or the tRNS chunk data) after it's read, so that 0 is +fully opaque and 255 (in 8-bit or paletted images) or 65535 (in 16-bit +images) is fully transparent, with + + png_set_invert_alpha(png_ptr); + +PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as +they can, resulting in, for example, 8 pixels per byte for 1 bit +files. This code expands to 1 pixel per byte without changing the +values of the pixels: + + if (bit_depth < 8) + png_set_packing(png_ptr); + +PNG files have possible bit depths of 1, 2, 4, 8, and 16. All pixels +stored in a PNG image have been "scaled" or "shifted" up to the next +higher possible bit depth (e.g. from 5 bits/sample in the range [0,31] +to 8 bits/sample in the range [0, 255]). However, it is also possible +to convert the PNG pixel data back to the original bit depth of the +image. This call reduces the pixels back down to the original bit depth: + + png_color_8p sig_bit; + + if (png_get_sBIT(png_ptr, info_ptr, &sig_bit)) + png_set_shift(png_ptr, sig_bit); + +PNG files store 3-color pixels in red, green, blue order. This code +changes the storage of the pixels to blue, green, red: + + if (color_type == PNG_COLOR_TYPE_RGB || + color_type == PNG_COLOR_TYPE_RGB_ALPHA) + png_set_bgr(png_ptr); + +PNG files store RGB pixels packed into 3 or 6 bytes. This code expands them +into 4 or 8 bytes for windowing systems that need them in this format: + + if (color_type == PNG_COLOR_TYPE_RGB) + png_set_filler(png_ptr, filler, PNG_FILLER_BEFORE); + +where "filler" is the 8 or 16-bit number to fill with, and the location is +either PNG_FILLER_BEFORE or PNG_FILLER_AFTER, depending upon whether +you want the filler before the RGB or after. This transformation +does not affect images that already have full alpha channels. To add an +opaque alpha channel, use filler=0xff or 0xffff and PNG_FILLER_AFTER which +will generate RGBA pixels. + +Note that png_set_filler() does not change the color type. If you want +to do that, you can add a true alpha channel with + + if (color_type == PNG_COLOR_TYPE_RGB || + color_type == PNG_COLOR_TYPE_GRAY) + png_set_add_alpha(png_ptr, filler, PNG_FILLER_AFTER); + +where "filler" contains the alpha value to assign to each pixel. +This function was added in libpng-1.2.7. + +If you are reading an image with an alpha channel, and you need the +data as ARGB instead of the normal PNG format RGBA: + + if (color_type == PNG_COLOR_TYPE_RGB_ALPHA) + png_set_swap_alpha(png_ptr); + +For some uses, you may want a grayscale image to be represented as +RGB. This code will do that conversion: + + if (color_type == PNG_COLOR_TYPE_GRAY || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_gray_to_rgb(png_ptr); + +Conversely, you can convert an RGB or RGBA image to grayscale or grayscale +with alpha. + + if (color_type == PNG_COLOR_TYPE_RGB || + color_type == PNG_COLOR_TYPE_RGB_ALPHA) + png_set_rgb_to_gray(png_ptr, error_action, + double red_weight, double green_weight); + + error_action = 1: silently do the conversion + + error_action = 2: issue a warning if the original + image has any pixel where + red != green or red != blue + + error_action = 3: issue an error and abort the + conversion if the original + image has any pixel where + red != green or red != blue + + red_weight: weight of red component + + green_weight: weight of green component + If either weight is negative, default + weights are used. + +In the corresponding fixed point API the red_weight and green_weight values are +simply scaled by 100,000: + + png_set_rgb_to_gray(png_ptr, error_action, + png_fixed_point red_weight, + png_fixed_point green_weight); + +If you have set error_action = 1 or 2, you can +later check whether the image really was gray, after processing +the image rows, with the png_get_rgb_to_gray_status(png_ptr) function. +It will return a png_byte that is zero if the image was gray or +1 if there were any non-gray pixels. Background and sBIT data +will be silently converted to grayscale, using the green channel +data for sBIT, regardless of the error_action setting. + +The default values come from the PNG file cHRM chunk if present; otherwise, the +defaults correspond to the ITU-R recommendation 709, and also the sRGB color +space, as recommended in the Charles Poynton's Colour FAQ, +, in section 9: + + + + Y = 0.2126 * R + 0.7152 * G + 0.0722 * B + +Previous versions of this document, 1998 through 2002, recommended a slightly +different formula: + + Y = 0.212671 * R + 0.715160 * G + 0.072169 * B + +Libpng uses an integer approximation: + + Y = (6968 * R + 23434 * G + 2366 * B)/32768 + +The calculation is done in a linear colorspace, if the image gamma +can be determined. + +The png_set_background() function has been described already; it tells libpng to +composite images with alpha or simple transparency against the supplied +background color. For compatibility with versions of libpng earlier than +libpng-1.5.4 it is recommended that you call the function after reading the file +header, even if you don't want to use the color in a bKGD chunk, if one exists. + +If the PNG file contains a bKGD chunk (PNG_INFO_bKGD valid), +you may use this color, or supply another color more suitable for +the current display (e.g., the background color from a web page). You +need to tell libpng how the color is represented, both the format of the +component values in the color (the number of bits) and the gamma encoding of the +color. The function takes two arguments, background_gamma_mode and need_expand +to convey this information; however, only two combinations are likely to be +useful: + + png_color_16 my_background; + png_color_16p image_background; + + if (png_get_bKGD(png_ptr, info_ptr, &image_background)) + png_set_background(png_ptr, image_background, + PNG_BACKGROUND_GAMMA_FILE, 1/*needs to be expanded*/, 1); + else + png_set_background(png_ptr, &my_background, + PNG_BACKGROUND_GAMMA_SCREEN, 0/*do not expand*/, 1); + +The second call was described above - my_background is in the format of the +final, display, output produced by libpng. Because you now know the format of +the PNG it is possible to avoid the need to choose either 8-bit or 16-bit +output and to retain palette images (the palette colors will be modified +appropriately and the tRNS chunk removed.) However, if you are doing this, +take great care not to ask for transformations without checking first that +they apply! + +In the first call the background color has the original bit depth and color type +of the PNG file. So, for palette images the color is supplied as a palette +index and for low bit greyscale images the color is a reduced bit value in +image_background->gray. + +If you didn't call png_set_gamma() before reading the file header, for example +if you need your code to remain compatible with older versions of libpng prior +to libpng-1.5.4, this is the place to call it. + +Do not call it if you called png_set_alpha_mode(); doing so will damage the +settings put in place by png_set_alpha_mode(). (If png_set_alpha_mode() is +supported then you can certainly do png_set_gamma() before reading the PNG +header.) + +This API unconditionally sets the screen and file gamma values, so it will +override the value in the PNG file unless it is called before the PNG file +reading starts. For this reason you must always call it with the PNG file +value when you call it in this position: + + if (png_get_gAMA(png_ptr, info_ptr, &file_gamma)) + png_set_gamma(png_ptr, screen_gamma, file_gamma); + + else + png_set_gamma(png_ptr, screen_gamma, 0.45455); + +If you need to reduce an RGB file to a paletted file, or if a paletted +file has more entries then will fit on your screen, png_set_quantize() +will do that. Note that this is a simple match quantization that merely +finds the closest color available. This should work fairly well with +optimized palettes, but fairly badly with linear color cubes. If you +pass a palette that is larger than maximum_colors, the file will +reduce the number of colors in the palette so it will fit into +maximum_colors. If there is a histogram, libpng will use it to make +more intelligent choices when reducing the palette. If there is no +histogram, it may not do as good a job. + + if (color_type & PNG_COLOR_MASK_COLOR) + { + if (png_get_valid(png_ptr, info_ptr, + PNG_INFO_PLTE)) + { + png_uint_16p histogram = NULL; + + png_get_hIST(png_ptr, info_ptr, + &histogram); + png_set_quantize(png_ptr, palette, num_palette, + max_screen_colors, histogram, 1); + } + + else + { + png_color std_color_cube[MAX_SCREEN_COLORS] = + { ... colors ... }; + + png_set_quantize(png_ptr, std_color_cube, + MAX_SCREEN_COLORS, MAX_SCREEN_COLORS, + NULL,0); + } + } + +PNG files describe monochrome as black being zero and white being one. +The following code will reverse this (make black be one and white be +zero): + + if (bit_depth == 1 && color_type == PNG_COLOR_TYPE_GRAY) + png_set_invert_mono(png_ptr); + +This function can also be used to invert grayscale and gray-alpha images: + + if (color_type == PNG_COLOR_TYPE_GRAY || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_invert_mono(png_ptr); + +PNG files store 16-bit pixels in network byte order (big-endian, +ie. most significant bits first). This code changes the storage to the +other way (little-endian, i.e. least significant bits first, the +way PCs store them): + + if (bit_depth == 16) + png_set_swap(png_ptr); + +If you are using packed-pixel images (1, 2, or 4 bits/pixel), and you +need to change the order the pixels are packed into bytes, you can use: + + if (bit_depth < 8) + png_set_packswap(png_ptr); + +Finally, you can write your own transformation function if none of +the existing ones meets your needs. This is done by setting a callback +with + + png_set_read_user_transform_fn(png_ptr, + read_transform_fn); + +You must supply the function + + void read_transform_fn(png_structp png_ptr, png_row_infop + row_info, png_bytep data) + +See pngtest.c for a working example. Your function will be called +after all of the other transformations have been processed. Take care with +interlaced images if you do the interlace yourself - the width of the row is the +width in 'row_info', not the overall image width. + +If supported, libpng provides two information routines that you can use to find +where you are in processing the image: + + png_get_current_pass_number(png_structp png_ptr); + png_get_current_row_number(png_structp png_ptr); + +Don't try using these outside a transform callback - firstly they are only +supported if user transforms are supported, secondly they may well return +unexpected results unless the row is actually being processed at the moment they +are called. + +With interlaced +images the value returned is the row in the input sub-image image. Use +PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to +find the output pixel (x,y) given an interlaced sub-image pixel (row,col,pass). + +The discussion of interlace handling above contains more information on how to +use these values. + +You can also set up a pointer to a user structure for use by your +callback function, and you can inform libpng that your transform +function will change the number of channels or bit depth with the +function + + png_set_user_transform_info(png_ptr, user_ptr, + user_depth, user_channels); + +The user's application, not libpng, is responsible for allocating and +freeing any memory required for the user structure. + +You can retrieve the pointer via the function +png_get_user_transform_ptr(). For example: + + voidp read_user_transform_ptr = + png_get_user_transform_ptr(png_ptr); + +The last thing to handle is interlacing; this is covered in detail below, +but you must call the function here if you want libpng to handle expansion +of the interlaced image. + + number_of_passes = png_set_interlace_handling(png_ptr); + +After setting the transformations, libpng can update your png_info +structure to reflect any transformations you've requested with this +call. + + png_read_update_info(png_ptr, info_ptr); + +This is most useful to update the info structure's rowbytes +field so you can use it to allocate your image memory. This function +will also update your palette with the correct screen_gamma and +background if these have been given with the calls above. You may +only call png_read_update_info() once with a particular info_ptr. + +After you call png_read_update_info(), you can allocate any +memory you need to hold the image. The row data is simply +raw byte data for all forms of images. As the actual allocation +varies among applications, no example will be given. If you +are allocating one large chunk, you will need to build an +array of pointers to each row, as it will be needed for some +of the functions below. + +Remember: Before you call png_read_update_info(), the png_get_*() +functions return the values corresponding to the original PNG image. +After you call png_read_update_info the values refer to the image +that libpng will output. Consequently you must call all the png_set_ +functions before you call png_read_update_info(). This is particularly +important for png_set_interlace_handling() - if you are going to call +png_read_update_info() you must call png_set_interlace_handling() before +it unless you want to receive interlaced output. + +Reading image data + +After you've allocated memory, you can read the image data. +The simplest way to do this is in one function call. If you are +allocating enough memory to hold the whole image, you can just +call png_read_image() and libpng will read in all the image data +and put it in the memory area supplied. You will need to pass in +an array of pointers to each row. + +This function automatically handles interlacing, so you don't +need to call png_set_interlace_handling() (unless you call +png_read_update_info()) or call this function multiple times, or any +of that other stuff necessary with png_read_rows(). + + png_read_image(png_ptr, row_pointers); + +where row_pointers is: + + png_bytep row_pointers[height]; + +You can point to void or char or whatever you use for pixels. + +If you don't want to read in the whole image at once, you can +use png_read_rows() instead. If there is no interlacing (check +interlace_type == PNG_INTERLACE_NONE), this is simple: + + png_read_rows(png_ptr, row_pointers, NULL, + number_of_rows); + +where row_pointers is the same as in the png_read_image() call. + +If you are doing this just one row at a time, you can do this with +a single row_pointer instead of an array of row_pointers: + + png_bytep row_pointer = row; + png_read_row(png_ptr, row_pointer, NULL); + +If the file is interlaced (interlace_type != 0 in the IHDR chunk), things +get somewhat harder. The only current (PNG Specification version 1.2) +interlacing type for PNG is (interlace_type == PNG_INTERLACE_ADAM7); +a somewhat complicated 2D interlace scheme, known as Adam7, that +breaks down an image into seven smaller images of varying size, based +on an 8x8 grid. This number is defined (from libpng 1.5) as +PNG_INTERLACE_ADAM7_PASSES in png.h + +libpng can fill out those images or it can give them to you "as is". +It is almost always better to have libpng handle the interlacing for you. +If you want the images filled out, there are two ways to do that. The one +mentioned in the PNG specification is to expand each pixel to cover +those pixels that have not been read yet (the "rectangle" method). +This results in a blocky image for the first pass, which gradually +smooths out as more pixels are read. The other method is the "sparkle" +method, where pixels are drawn only in their final locations, with the +rest of the image remaining whatever colors they were initialized to +before the start of the read. The first method usually looks better, +but tends to be slower, as there are more pixels to put in the rows. + +If, as is likely, you want libpng to expand the images, call this before +calling png_start_read_image() or png_read_update_info(): + + if (interlace_type == PNG_INTERLACE_ADAM7) + number_of_passes + = png_set_interlace_handling(png_ptr); + +This will return the number of passes needed. Currently, this is seven, +but may change if another interlace type is added. This function can be +called even if the file is not interlaced, where it will return one pass. +You then need to read the whole image 'number_of_passes' times. Each time +will distribute the pixels from the current pass to the correct place in +the output image, so you need to supply the same rows to png_read_rows in +each pass. + +If you are not going to display the image after each pass, but are +going to wait until the entire image is read in, use the sparkle +effect. This effect is faster and the end result of either method +is exactly the same. If you are planning on displaying the image +after each pass, the "rectangle" effect is generally considered the +better looking one. + +If you only want the "sparkle" effect, just call png_read_rows() as +normal, with the third parameter NULL. Make sure you make pass over +the image number_of_passes times, and you don't change the data in the +rows between calls. You can change the locations of the data, just +not the data. Each pass only writes the pixels appropriate for that +pass, and assumes the data from previous passes is still valid. + + png_read_rows(png_ptr, row_pointers, NULL, + number_of_rows); + +If you only want the first effect (the rectangles), do the same as +before except pass the row buffer in the third parameter, and leave +the second parameter NULL. + + png_read_rows(png_ptr, NULL, row_pointers, + number_of_rows); + +If you don't want libpng to handle the interlacing details, just call +png_read_rows() PNG_INTERLACE_ADAM7_PASSES times to read in all the images. +Each of the images is a valid image by itself; however, you will almost +certainly need to distribute the pixels from each sub-image to the +correct place. This is where everything gets very tricky. + +If you want to retrieve the separate images you must pass the correct +number of rows to each successive call of png_read_rows(). The calculation +gets pretty complicated for small images, where some sub-images may +not even exist because either their width or height ends up zero. +libpng provides two macros to help you in 1.5 and later versions: + + png_uint_32 width = PNG_PASS_COLS(image_width, pass_number); + png_uint_32 height = PNG_PASS_ROWS(image_height, pass_number); + +Respectively these tell you the width and height of the sub-image +corresponding to the numbered pass. 'pass' is in in the range 0 to 6 - +this can be confusing because the specification refers to the same passes +as 1 to 7! Be careful, you must check both the width and height before +calling png_read_rows() and not call it for that pass if either is zero. + +You can, of course, read each sub-image row by row. If you want to +produce optimal code to make a pixel-by-pixel transformation of an +interlaced image this is the best approach; read each row of each pass, +transform it, and write it out to a new interlaced image. + +If you want to de-interlace the image yourself libpng provides further +macros to help that tell you where to place the pixels in the output image. +Because the interlacing scheme is rectangular - sub-image pixels are always +arranged on a rectangular grid - all you need to know for each pass is the +starting column and row in the output image of the first pixel plus the +spacing between each pixel. As of libpng 1.5 there are four macros to +retrieve this information: + + png_uint_32 x = PNG_PASS_START_COL(pass); + png_uint_32 y = PNG_PASS_START_ROW(pass); + png_uint_32 xStep = 1U << PNG_PASS_COL_SHIFT(pass); + png_uint_32 yStep = 1U << PNG_PASS_ROW_SHIFT(pass); + +These allow you to write the obvious loop: + + png_uint_32 input_y = 0; + png_uint_32 output_y = PNG_PASS_START_ROW(pass); + + while (output_y < output_image_height) + { + png_uint_32 input_x = 0; + png_uint_32 output_x = PNG_PASS_START_COL(pass); + + while (output_x < output_image_width) + { + image[output_y][output_x] = + subimage[pass][input_y][input_x++]; + + output_x += xStep; + } + + ++input_y; + output_y += yStep; + } + +Notice that the steps between successive output rows and columns are +returned as shifts. This is possible because the pixels in the subimages +are always a power of 2 apart - 1, 2, 4 or 8 pixels - in the original +image. In practice you may need to directly calculate the output coordinate +given an input coordinate. libpng provides two further macros for this +purpose: + + png_uint_32 output_x = PNG_COL_FROM_PASS_COL(input_x, pass); + png_uint_32 output_y = PNG_ROW_FROM_PASS_ROW(input_y, pass); + +Finally a pair of macros are provided to tell you if a particular image +row or column appears in a given pass: + + int col_in_pass = PNG_COL_IN_INTERLACE_PASS(output_x, pass); + int row_in_pass = PNG_ROW_IN_INTERLACE_PASS(output_y, pass); + +Bear in mind that you will probably also need to check the width and height +of the pass in addition to the above to be sure the pass even exists! + +With any luck you are convinced by now that you don't want to do your own +interlace handling. In reality normally the only good reason for doing this +is if you are processing PNG files on a pixel-by-pixel basis and don't want +to load the whole file into memory when it is interlaced. + +libpng includes a test program, pngvalid, that illustrates reading and +writing of interlaced images. If you can't get interlacing to work in your +code and don't want to leave it to libpng (the recommended approach), see +how pngvalid.c does it. + +Finishing a sequential read + +After you are finished reading the image through the +low-level interface, you can finish reading the file. If you are +interested in comments or time, which may be stored either before or +after the image data, you should pass the separate png_info struct if +you want to keep the comments from before and after the image +separate. + + png_infop end_info = png_create_info_struct(png_ptr); + + if (!end_info) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + (png_infopp)NULL); + return (ERROR); + } + + png_read_end(png_ptr, end_info); + +If you are not interested, you should still call png_read_end() +but you can pass NULL, avoiding the need to create an end_info structure. + + png_read_end(png_ptr, (png_infop)NULL); + +If you don't call png_read_end(), then your file pointer will be +left pointing to the first chunk after the last IDAT, which is probably +not what you want if you expect to read something beyond the end of +the PNG datastream. + +When you are done, you can free all memory allocated by libpng like this: + + png_destroy_read_struct(&png_ptr, &info_ptr, + &end_info); + +or, if you didn't create an end_info structure, + + png_destroy_read_struct(&png_ptr, &info_ptr, + (png_infopp)NULL); + +It is also possible to individually free the info_ptr members that +point to libpng-allocated storage with the following function: + + png_free_data(png_ptr, info_ptr, mask, seq) + + mask - identifies data to be freed, a mask + containing the bitwise OR of one or + more of + PNG_FREE_PLTE, PNG_FREE_TRNS, + PNG_FREE_HIST, PNG_FREE_ICCP, + PNG_FREE_PCAL, PNG_FREE_ROWS, + PNG_FREE_SCAL, PNG_FREE_SPLT, + PNG_FREE_TEXT, PNG_FREE_UNKN, + or simply PNG_FREE_ALL + + seq - sequence number of item to be freed + (-1 for all items) + +This function may be safely called when the relevant storage has +already been freed, or has not yet been allocated, or was allocated +by the user and not by libpng, and will in those cases do nothing. +The "seq" parameter is ignored if only one item of the selected data +type, such as PLTE, is allowed. If "seq" is not -1, and multiple items +are allowed for the data type identified in the mask, such as text or +sPLT, only the n'th item in the structure is freed, where n is "seq". + +The default behavior is only to free data that was allocated internally +by libpng. This can be changed, so that libpng will not free the data, +or so that it will free data that was allocated by the user with png_malloc() +or png_calloc() and passed in via a png_set_*() function, with + + png_data_freer(png_ptr, info_ptr, freer, mask) + + freer - one of + PNG_DESTROY_WILL_FREE_DATA + PNG_SET_WILL_FREE_DATA + PNG_USER_WILL_FREE_DATA + + mask - which data elements are affected + same choices as in png_free_data() + +This function only affects data that has already been allocated. +You can call this function after reading the PNG data but before calling +any png_set_*() functions, to control whether the user or the png_set_*() +function is responsible for freeing any existing data that might be present, +and again after the png_set_*() functions to control whether the user +or png_destroy_*() is supposed to free the data. When the user assumes +responsibility for libpng-allocated data, the application must use +png_free() to free it, and when the user transfers responsibility to libpng +for data that the user has allocated, the user must have used png_malloc() +or png_calloc() to allocate it. + +If you allocated your row_pointers in a single block, as suggested above in +the description of the high level read interface, you must not transfer +responsibility for freeing it to the png_set_rows or png_read_destroy function, +because they would also try to free the individual row_pointers[i]. + +If you allocated text_ptr.text, text_ptr.lang, and text_ptr.translated_keyword +separately, do not transfer responsibility for freeing text_ptr to libpng, +because when libpng fills a png_text structure it combines these members with +the key member, and png_free_data() will free only text_ptr.key. Similarly, +if you transfer responsibility for free'ing text_ptr from libpng to your +application, your application must not separately free those members. + +The png_free_data() function will turn off the "valid" flag for anything +it frees. If you need to turn the flag off for a chunk that was freed by +your application instead of by libpng, you can use + + png_set_invalid(png_ptr, info_ptr, mask); + + mask - identifies the chunks to be made invalid, + containing the bitwise OR of one or + more of + PNG_INFO_gAMA, PNG_INFO_sBIT, + PNG_INFO_cHRM, PNG_INFO_PLTE, + PNG_INFO_tRNS, PNG_INFO_bKGD, + PNG_INFO_hIST, PNG_INFO_pHYs, + PNG_INFO_oFFs, PNG_INFO_tIME, + PNG_INFO_pCAL, PNG_INFO_sRGB, + PNG_INFO_iCCP, PNG_INFO_sPLT, + PNG_INFO_sCAL, PNG_INFO_IDAT + +For a more compact example of reading a PNG image, see the file example.c. + +Reading PNG files progressively + +The progressive reader is slightly different then the non-progressive +reader. Instead of calling png_read_info(), png_read_rows(), and +png_read_end(), you make one call to png_process_data(), which calls +callbacks when it has the info, a row, or the end of the image. You +set up these callbacks with png_set_progressive_read_fn(). You don't +have to worry about the input/output functions of libpng, as you are +giving the library the data directly in png_process_data(). I will +assume that you have read the section on reading PNG files above, +so I will only highlight the differences (although I will show +all of the code). + +png_structp png_ptr; +png_infop info_ptr; + + /* An example code fragment of how you would + initialize the progressive reader in your + application. */ + int + initialize_png_reader() + { + png_ptr = png_create_read_struct + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn); + + if (!png_ptr) + return (ERROR); + + info_ptr = png_create_info_struct(png_ptr); + + if (!info_ptr) + { + png_destroy_read_struct(&png_ptr, + (png_infopp)NULL, (png_infopp)NULL); + return (ERROR); + } + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + (png_infopp)NULL); + return (ERROR); + } + + /* This one's new. You can provide functions + to be called when the header info is valid, + when each row is completed, and when the image + is finished. If you aren't using all functions, + you can specify NULL parameters. Even when all + three functions are NULL, you need to call + png_set_progressive_read_fn(). You can use + any struct as the user_ptr (cast to a void pointer + for the function call), and retrieve the pointer + from inside the callbacks using the function + + png_get_progressive_ptr(png_ptr); + + which will return a void pointer, which you have + to cast appropriately. + */ + png_set_progressive_read_fn(png_ptr, (void *)user_ptr, + info_callback, row_callback, end_callback); + + return 0; + } + + /* A code fragment that you call as you receive blocks + of data */ + int + process_data(png_bytep buffer, png_uint_32 length) + { + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + (png_infopp)NULL); + return (ERROR); + } + + /* This one's new also. Simply give it a chunk + of data from the file stream (in order, of + course). On machines with segmented memory + models machines, don't give it any more than + 64K. The library seems to run fine with sizes + of 4K. Although you can give it much less if + necessary (I assume you can give it chunks of + 1 byte, I haven't tried less then 256 bytes + yet). When this function returns, you may + want to display any rows that were generated + in the row callback if you don't already do + so there. + */ + png_process_data(png_ptr, info_ptr, buffer, length); + + /* At this point you can call png_process_data_skip if + you want to handle data the library will skip yourself; + it simply returns the number of bytes to skip (and stops + libpng skipping that number of bytes on the next + png_process_data call). + return 0; + } + + /* This function is called (as set by + png_set_progressive_read_fn() above) when enough data + has been supplied so all of the header has been + read. + */ + void + info_callback(png_structp png_ptr, png_infop info) + { + /* Do any setup here, including setting any of + the transformations mentioned in the Reading + PNG files section. For now, you _must_ call + either png_start_read_image() or + png_read_update_info() after all the + transformations are set (even if you don't set + any). You may start getting rows before + png_process_data() returns, so this is your + last chance to prepare for that. + + This is where you turn on interlace handling, + assuming you don't want to do it yourself. + + If you need to you can stop the processing of + your original input data at this point by calling + png_process_data_pause. This returns the number + of unprocessed bytes from the last png_process_data + call - it is up to you to ensure that the next call + sees these bytes again. If you don't want to bother + with this you can get libpng to cache the unread + bytes by setting the 'save' parameter (see png.h) but + then libpng will have to copy the data internally. + */ + } + + /* This function is called when each row of image + data is complete */ + void + row_callback(png_structp png_ptr, png_bytep new_row, + png_uint_32 row_num, int pass) + { + /* If the image is interlaced, and you turned + on the interlace handler, this function will + be called for every row in every pass. Some + of these rows will not be changed from the + previous pass. When the row is not changed, + the new_row variable will be NULL. The rows + and passes are called in order, so you don't + really need the row_num and pass, but I'm + supplying them because it may make your life + easier. + + If you did not turn on interlace handling then + the callback is called for each row of each + sub-image when the image is interlaced. In this + case 'row_num' is the row in the sub-image, not + the row in the output image as it is in all other + cases. + + For the non-NULL rows of interlaced images when + you have switched on libpng interlace handling, + you must call png_progressive_combine_row() + passing in the row and the old row. You can + call this function for NULL rows (it will just + return) and for non-interlaced images (it just + does the memcpy for you) if it will make the + code easier. Thus, you can just do this for + all cases if you switch on interlace handling; + */ + + png_progressive_combine_row(png_ptr, old_row, + new_row); + + /* where old_row is what was displayed for + previously for the row. Note that the first + pass (pass == 0, really) will completely cover + the old row, so the rows do not have to be + initialized. After the first pass (and only + for interlaced images), you will have to pass + the current row, and the function will combine + the old row and the new row. + + You can also call png_process_data_pause in this + callback - see above. + */ + } + + void + end_callback(png_structp png_ptr, png_infop info) + { + /* This function is called after the whole image + has been read, including any chunks after the + image (up to and including the IEND). You + will usually have the same info chunk as you + had in the header, although some data may have + been added to the comments and time fields. + + Most people won't do much here, perhaps setting + a flag that marks the image as finished. + */ + } + + + +IV. Writing + +Much of this is very similar to reading. However, everything of +importance is repeated here, so you won't have to constantly look +back up in the reading section to understand writing. + +Setup + +You will want to do the I/O initialization before you get into libpng, +so if it doesn't work, you don't have anything to undo. If you are not +using the standard I/O functions, you will need to replace them with +custom writing functions. See the discussion under Customizing libpng. + + FILE *fp = fopen(file_name, "wb"); + + if (!fp) + return (ERROR); + +Next, png_struct and png_info need to be allocated and initialized. +As these can be both relatively large, you may not want to store these +on the stack, unless you have stack space to spare. Of course, you +will want to check if they return NULL. If you are also reading, +you won't want to name your read structure and your write structure +both "png_ptr"; you can call them anything you like, such as +"read_ptr" and "write_ptr". Look at pngtest.c, for example. + + png_structp png_ptr = png_create_write_struct + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn); + + if (!png_ptr) + return (ERROR); + + png_infop info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) + { + png_destroy_write_struct(&png_ptr, + (png_infopp)NULL); + return (ERROR); + } + +If you want to use your own memory allocation routines, +define PNG_USER_MEM_SUPPORTED and use +png_create_write_struct_2() instead of png_create_write_struct(): + + png_structp png_ptr = png_create_write_struct_2 + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn, (png_voidp) + user_mem_ptr, user_malloc_fn, user_free_fn); + +After you have these structures, you will need to set up the +error handling. When libpng encounters an error, it expects to +longjmp() back to your routine. Therefore, you will need to call +setjmp() and pass the png_jmpbuf(png_ptr). If you +write the file from different routines, you will need to update +the png_jmpbuf(png_ptr) every time you enter a new routine that will +call a png_*() function. See your documentation of setjmp/longjmp +for your compiler for more information on setjmp/longjmp. See +the discussion on libpng error handling in the Customizing Libpng +section below for more information on the libpng error handling. + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_write_struct(&png_ptr, &info_ptr); + fclose(fp); + return (ERROR); + } + ... + return; + +If you would rather avoid the complexity of setjmp/longjmp issues, +you can compile libpng with PNG_NO_SETJMP, in which case +errors will result in a call to PNG_ABORT() which defaults to abort(). + +You can #define PNG_ABORT() to a function that does something +more useful than abort(), as long as your function does not +return. + +Checking for invalid palette index on write was added at libpng +1.5.10. If a pixel contains an invalid (out-of-range) index libpng issues +a benign error. This is enabled by default because this condition is an +error according to the PNG specification, Clause 11.3.2, but the error can +be ignored in each png_ptr with + + png_set_check_for_invalid_index(png_ptr, 0); + +If the error is ignored, or if png_benign_error() treats it as a warning, +any invalid pixels are written as-is by the encoder, resulting in an +invalid PNG datastream as output. In this case the application is +responsible for ensuring that the pixel indexes are in range when it writes +a PLTE chunk with fewer entries than the bit depth would allow. + +Now you need to set up the output code. The default for libpng is to +use the C function fwrite(). If you use this, you will need to pass a +valid FILE * in the function png_init_io(). Be sure that the file is +opened in binary mode. Again, if you wish to handle writing data in +another way, see the discussion on libpng I/O handling in the Customizing +Libpng section below. + + png_init_io(png_ptr, fp); + +If you are embedding your PNG into a datastream such as MNG, and don't +want libpng to write the 8-byte signature, or if you have already +written the signature in your application, use + + png_set_sig_bytes(png_ptr, 8); + +to inform libpng that it should not write a signature. + +Write callbacks + +At this point, you can set up a callback function that will be +called after each row has been written, which you can use to control +a progress meter or the like. It's demonstrated in pngtest.c. +You must supply a function + + void write_row_callback(png_structp png_ptr, png_uint_32 row, + int pass); + { + /* put your code here */ + } + +(You can give it another name that you like instead of "write_row_callback") + +To inform libpng about your function, use + + png_set_write_status_fn(png_ptr, write_row_callback); + +When this function is called the row has already been completely processed and +it has also been written out. The 'row' and 'pass' refer to the next row to be +handled. For the +non-interlaced case the row that was just handled is simply one less than the +passed in row number, and pass will always be 0. For the interlaced case the +same applies unless the row value is 0, in which case the row just handled was +the last one from one of the preceding passes. Because interlacing may skip a +pass you cannot be sure that the preceding pass is just 'pass-1', if you really +need to know what the last pass is record (row,pass) from the callback and use +the last recorded value each time. + +As with the user transform you can find the output row using the +PNG_ROW_FROM_PASS_ROW macro. + +You now have the option of modifying how the compression library will +run. The following functions are mainly for testing, but may be useful +in some cases, like if you need to write PNG files extremely fast and +are willing to give up some compression, or if you want to get the +maximum possible compression at the expense of slower writing. If you +have no special needs in this area, let the library do what it wants by +not calling this function at all, as it has been tuned to deliver a good +speed/compression ratio. The second parameter to png_set_filter() is +the filter method, for which the only valid values are 0 (as of the +July 1999 PNG specification, version 1.2) or 64 (if you are writing +a PNG datastream that is to be embedded in a MNG datastream). The third +parameter is a flag that indicates which filter type(s) are to be tested +for each scanline. See the PNG specification for details on the specific +filter types. + + + /* turn on or off filtering, and/or choose + specific filters. You can use either a single + PNG_FILTER_VALUE_NAME or the bitwise OR of one + or more PNG_FILTER_NAME masks. + */ + png_set_filter(png_ptr, 0, + PNG_FILTER_NONE | PNG_FILTER_VALUE_NONE | + PNG_FILTER_SUB | PNG_FILTER_VALUE_SUB | + PNG_FILTER_UP | PNG_FILTER_VALUE_UP | + PNG_FILTER_AVG | PNG_FILTER_VALUE_AVG | + PNG_FILTER_PAETH | PNG_FILTER_VALUE_PAETH| + PNG_ALL_FILTERS); + +If an application wants to start and stop using particular filters during +compression, it should start out with all of the filters (to ensure that +the previous row of pixels will be stored in case it's needed later), +and then add and remove them after the start of compression. + +If you are writing a PNG datastream that is to be embedded in a MNG +datastream, the second parameter can be either 0 or 64. + +The png_set_compression_*() functions interface to the zlib compression +library, and should mostly be ignored unless you really know what you are +doing. The only generally useful call is png_set_compression_level() +which changes how much time zlib spends on trying to compress the image +data. See the Compression Library (zlib.h and algorithm.txt, distributed +with zlib) for details on the compression levels. + + #include zlib.h + + /* Set the zlib compression level */ + png_set_compression_level(png_ptr, + Z_BEST_COMPRESSION); + + /* Set other zlib parameters for compressing IDAT */ + png_set_compression_mem_level(png_ptr, 8); + png_set_compression_strategy(png_ptr, + Z_DEFAULT_STRATEGY); + png_set_compression_window_bits(png_ptr, 15); + png_set_compression_method(png_ptr, 8); + png_set_compression_buffer_size(png_ptr, 8192) + + /* Set zlib parameters for text compression + * If you don't call these, the parameters + * fall back on those defined for IDAT chunks + */ + png_set_text_compression_mem_level(png_ptr, 8); + png_set_text_compression_strategy(png_ptr, + Z_DEFAULT_STRATEGY); + png_set_text_compression_window_bits(png_ptr, 15); + png_set_text_compression_method(png_ptr, 8); + +Setting the contents of info for output + +You now need to fill in the png_info structure with all the data you +wish to write before the actual image. Note that the only thing you +are allowed to write after the image is the text chunks and the time +chunk (as of PNG Specification 1.2, anyway). See png_write_end() and +the latest PNG specification for more information on that. If you +wish to write them before the image, fill them in now, and flag that +data as being valid. If you want to wait until after the data, don't +fill them until png_write_end(). For all the fields in png_info and +their data types, see png.h. For explanations of what the fields +contain, see the PNG specification. + +Some of the more important parts of the png_info are: + + png_set_IHDR(png_ptr, info_ptr, width, height, + bit_depth, color_type, interlace_type, + compression_type, filter_method) + + width - holds the width of the image + in pixels (up to 2^31). + + height - holds the height of the image + in pixels (up to 2^31). + + bit_depth - holds the bit depth of one of the + image channels. + (valid values are 1, 2, 4, 8, 16 + and depend also on the + color_type. See also significant + bits (sBIT) below). + + color_type - describes which color/alpha + channels are present. + PNG_COLOR_TYPE_GRAY + (bit depths 1, 2, 4, 8, 16) + PNG_COLOR_TYPE_GRAY_ALPHA + (bit depths 8, 16) + PNG_COLOR_TYPE_PALETTE + (bit depths 1, 2, 4, 8) + PNG_COLOR_TYPE_RGB + (bit_depths 8, 16) + PNG_COLOR_TYPE_RGB_ALPHA + (bit_depths 8, 16) + + PNG_COLOR_MASK_PALETTE + PNG_COLOR_MASK_COLOR + PNG_COLOR_MASK_ALPHA + + interlace_type - PNG_INTERLACE_NONE or + PNG_INTERLACE_ADAM7 + + compression_type - (must be + PNG_COMPRESSION_TYPE_DEFAULT) + + filter_method - (must be PNG_FILTER_TYPE_DEFAULT + or, if you are writing a PNG to + be embedded in a MNG datastream, + can also be + PNG_INTRAPIXEL_DIFFERENCING) + +If you call png_set_IHDR(), the call must appear before any of the +other png_set_*() functions, because they might require access to some of +the IHDR settings. The remaining png_set_*() functions can be called +in any order. + +If you wish, you can reset the compression_type, interlace_type, or +filter_method later by calling png_set_IHDR() again; if you do this, the +width, height, bit_depth, and color_type must be the same in each call. + + png_set_PLTE(png_ptr, info_ptr, palette, + num_palette); + + palette - the palette for the file + (array of png_color) + num_palette - number of entries in the palette + + png_set_gAMA(png_ptr, info_ptr, file_gamma); + png_set_gAMA_fixed(png_ptr, info_ptr, int_file_gamma); + + file_gamma - the gamma at which the image was + created (PNG_INFO_gAMA) + + int_file_gamma - 100,000 times the gamma at which + the image was created + + png_set_cHRM(png_ptr, info_ptr, white_x, white_y, red_x, red_y, + green_x, green_y, blue_x, blue_y) + png_set_cHRM_XYZ(png_ptr, info_ptr, red_X, red_Y, red_Z, green_X, + green_Y, green_Z, blue_X, blue_Y, blue_Z) + png_set_cHRM_fixed(png_ptr, info_ptr, int_white_x, int_white_y, + int_red_x, int_red_y, int_green_x, int_green_y, + int_blue_x, int_blue_y) + png_set_cHRM_XYZ_fixed(png_ptr, info_ptr, int_red_X, int_red_Y, + int_red_Z, int_green_X, int_green_Y, int_green_Z, + int_blue_X, int_blue_Y, int_blue_Z) + + {white,red,green,blue}_{x,y} + A color space encoding specified using the chromaticities + of the end points and the white point. + + {red,green,blue}_{X,Y,Z} + A color space encoding specified using the encoding end + points - the CIE tristimulus specification of the intended + color of the red, green and blue channels in the PNG RGB + data. The white point is simply the sum of the three end + points. + + png_set_sRGB(png_ptr, info_ptr, srgb_intent); + + srgb_intent - the rendering intent + (PNG_INFO_sRGB) The presence of + the sRGB chunk means that the pixel + data is in the sRGB color space. + This chunk also implies specific + values of gAMA and cHRM. Rendering + intent is the CSS-1 property that + has been defined by the International + Color Consortium + (http://www.color.org). + It can be one of + PNG_sRGB_INTENT_SATURATION, + PNG_sRGB_INTENT_PERCEPTUAL, + PNG_sRGB_INTENT_ABSOLUTE, or + PNG_sRGB_INTENT_RELATIVE. + + + png_set_sRGB_gAMA_and_cHRM(png_ptr, info_ptr, + srgb_intent); + + srgb_intent - the rendering intent + (PNG_INFO_sRGB) The presence of the + sRGB chunk means that the pixel + data is in the sRGB color space. + This function also causes gAMA and + cHRM chunks with the specific values + that are consistent with sRGB to be + written. + + png_set_iCCP(png_ptr, info_ptr, name, compression_type, + profile, proflen); + + name - The profile name. + + compression_type - The compression type; always + PNG_COMPRESSION_TYPE_BASE for PNG 1.0. + You may give NULL to this argument to + ignore it. + + profile - International Color Consortium color + profile data. May contain NULs. + + proflen - length of profile data in bytes. + + png_set_sBIT(png_ptr, info_ptr, sig_bit); + + sig_bit - the number of significant bits for + (PNG_INFO_sBIT) each of the gray, red, + green, and blue channels, whichever are + appropriate for the given color type + (png_color_16) + + png_set_tRNS(png_ptr, info_ptr, trans_alpha, + num_trans, trans_color); + + trans_alpha - array of alpha (transparency) + entries for palette (PNG_INFO_tRNS) + + num_trans - number of transparent entries + (PNG_INFO_tRNS) + + trans_color - graylevel or color sample values + (in order red, green, blue) of the + single transparent color for + non-paletted images (PNG_INFO_tRNS) + + png_set_hIST(png_ptr, info_ptr, hist); + + hist - histogram of palette (array of + png_uint_16) (PNG_INFO_hIST) + + png_set_tIME(png_ptr, info_ptr, mod_time); + + mod_time - time image was last modified + (PNG_VALID_tIME) + + png_set_bKGD(png_ptr, info_ptr, background); + + background - background color (of type + png_color_16p) (PNG_VALID_bKGD) + + png_set_text(png_ptr, info_ptr, text_ptr, num_text); + + text_ptr - array of png_text holding image + comments + + text_ptr[i].compression - type of compression used + on "text" PNG_TEXT_COMPRESSION_NONE + PNG_TEXT_COMPRESSION_zTXt + PNG_ITXT_COMPRESSION_NONE + PNG_ITXT_COMPRESSION_zTXt + text_ptr[i].key - keyword for comment. Must contain + 1-79 characters. + text_ptr[i].text - text comments for current + keyword. Can be NULL or empty. + text_ptr[i].text_length - length of text string, + after decompression, 0 for iTXt + text_ptr[i].itxt_length - length of itxt string, + after decompression, 0 for tEXt/zTXt + text_ptr[i].lang - language of comment (NULL or + empty for unknown). + text_ptr[i].translated_keyword - keyword in UTF-8 (NULL + or empty for unknown). + + Note that the itxt_length, lang, and lang_key + members of the text_ptr structure only exist when the + library is built with iTXt chunk support. Prior to + libpng-1.4.0 the library was built by default without + iTXt support. Also note that when iTXt is supported, + they contain NULL pointers when the "compression" + field contains PNG_TEXT_COMPRESSION_NONE or + PNG_TEXT_COMPRESSION_zTXt. + + num_text - number of comments + + png_set_sPLT(png_ptr, info_ptr, &palette_ptr, + num_spalettes); + + palette_ptr - array of png_sPLT_struct structures + to be added to the list of palettes + in the info structure. + num_spalettes - number of palette structures to be + added. + + png_set_oFFs(png_ptr, info_ptr, offset_x, offset_y, + unit_type); + + offset_x - positive offset from the left + edge of the screen + + offset_y - positive offset from the top + edge of the screen + + unit_type - PNG_OFFSET_PIXEL, PNG_OFFSET_MICROMETER + + png_set_pHYs(png_ptr, info_ptr, res_x, res_y, + unit_type); + + res_x - pixels/unit physical resolution + in x direction + + res_y - pixels/unit physical resolution + in y direction + + unit_type - PNG_RESOLUTION_UNKNOWN, + PNG_RESOLUTION_METER + + png_set_sCAL(png_ptr, info_ptr, unit, width, height) + + unit - physical scale units (an integer) + + width - width of a pixel in physical scale units + + height - height of a pixel in physical scale units + (width and height are doubles) + + png_set_sCAL_s(png_ptr, info_ptr, unit, width, height) + + unit - physical scale units (an integer) + + width - width of a pixel in physical scale units + expressed as a string + + height - height of a pixel in physical scale units + (width and height are strings like "2.54") + + png_set_unknown_chunks(png_ptr, info_ptr, &unknowns, + num_unknowns) + + unknowns - array of png_unknown_chunk + structures holding unknown chunks + unknowns[i].name - name of unknown chunk + unknowns[i].data - data of unknown chunk + unknowns[i].size - size of unknown chunk's data + unknowns[i].location - position to write chunk in file + 0: do not write chunk + PNG_HAVE_IHDR: before PLTE + PNG_HAVE_PLTE: before IDAT + PNG_AFTER_IDAT: after IDAT + +The "location" member is set automatically according to +what part of the output file has already been written. +You can change its value after calling png_set_unknown_chunks() +as demonstrated in pngtest.c. Within each of the "locations", +the chunks are sequenced according to their position in the +structure (that is, the value of "i", which is the order in which +the chunk was either read from the input file or defined with +png_set_unknown_chunks). + +A quick word about text and num_text. text is an array of png_text +structures. num_text is the number of valid structures in the array. +Each png_text structure holds a language code, a keyword, a text value, +and a compression type. + +The compression types have the same valid numbers as the compression +types of the image data. Currently, the only valid number is zero. +However, you can store text either compressed or uncompressed, unlike +images, which always have to be compressed. So if you don't want the +text compressed, set the compression type to PNG_TEXT_COMPRESSION_NONE. +Because tEXt and zTXt chunks don't have a language field, if you +specify PNG_TEXT_COMPRESSION_NONE or PNG_TEXT_COMPRESSION_zTXt +any language code or translated keyword will not be written out. + +Until text gets around a few hundred bytes, it is not worth compressing it. +After the text has been written out to the file, the compression type +is set to PNG_TEXT_COMPRESSION_NONE_WR or PNG_TEXT_COMPRESSION_zTXt_WR, +so that it isn't written out again at the end (in case you are calling +png_write_end() with the same struct). + +The keywords that are given in the PNG Specification are: + + Title Short (one line) title or + caption for image + + Author Name of image's creator + + Description Description of image (possibly long) + + Copyright Copyright notice + + Creation Time Time of original image creation + (usually RFC 1123 format, see below) + + Software Software used to create the image + + Disclaimer Legal disclaimer + + Warning Warning of nature of content + + Source Device used to create the image + + Comment Miscellaneous comment; conversion + from other image format + +The keyword-text pairs work like this. Keywords should be short +simple descriptions of what the comment is about. Some typical +keywords are found in the PNG specification, as is some recommendations +on keywords. You can repeat keywords in a file. You can even write +some text before the image and some after. For example, you may want +to put a description of the image before the image, but leave the +disclaimer until after, so viewers working over modem connections +don't have to wait for the disclaimer to go over the modem before +they start seeing the image. Finally, keywords should be full +words, not abbreviations. Keywords and text are in the ISO 8859-1 +(Latin-1) character set (a superset of regular ASCII) and can not +contain NUL characters, and should not contain control or other +unprintable characters. To make the comments widely readable, stick +with basic ASCII, and avoid machine specific character set extensions +like the IBM-PC character set. The keyword must be present, but +you can leave off the text string on non-compressed pairs. +Compressed pairs must have a text string, as only the text string +is compressed anyway, so the compression would be meaningless. + +PNG supports modification time via the png_time structure. Two +conversion routines are provided, png_convert_from_time_t() for +time_t and png_convert_from_struct_tm() for struct tm. The +time_t routine uses gmtime(). You don't have to use either of +these, but if you wish to fill in the png_time structure directly, +you should provide the time in universal time (GMT) if possible +instead of your local time. Note that the year number is the full +year (e.g. 1998, rather than 98 - PNG is year 2000 compliant!), and +that months start with 1. + +If you want to store the time of the original image creation, you should +use a plain tEXt chunk with the "Creation Time" keyword. This is +necessary because the "creation time" of a PNG image is somewhat vague, +depending on whether you mean the PNG file, the time the image was +created in a non-PNG format, a still photo from which the image was +scanned, or possibly the subject matter itself. In order to facilitate +machine-readable dates, it is recommended that the "Creation Time" +tEXt chunk use RFC 1123 format dates (e.g. "22 May 1997 18:07:10 GMT"), +although this isn't a requirement. Unlike the tIME chunk, the +"Creation Time" tEXt chunk is not expected to be automatically changed +by the software. To facilitate the use of RFC 1123 dates, a function +png_convert_to_rfc1123_buffer(png_ptr, buffer, png_timep) is provided to +convert from PNG time to an RFC 1123 format string. The caller must provide +a writeable buffer of at least 29 bytes. + +Writing unknown chunks + +You can use the png_set_unknown_chunks function to queue up chunks +for writing. You give it a chunk name, raw data, and a size; that's +all there is to it. The chunks will be written by the next following +png_write_info_before_PLTE, png_write_info, or png_write_end function. +Any chunks previously read into the info structure's unknown-chunk +list will also be written out in a sequence that satisfies the PNG +specification's ordering rules. + +The high-level write interface + +At this point there are two ways to proceed; through the high-level +write interface, or through a sequence of low-level write operations. +You can use the high-level interface if your image data is present +in the info structure. All defined output +transformations are permitted, enabled by the following masks. + + PNG_TRANSFORM_IDENTITY No transformation + PNG_TRANSFORM_PACKING Pack 1, 2 and 4-bit samples + PNG_TRANSFORM_PACKSWAP Change order of packed + pixels to LSB first + PNG_TRANSFORM_INVERT_MONO Invert monochrome images + PNG_TRANSFORM_SHIFT Normalize pixels to the + sBIT depth + PNG_TRANSFORM_BGR Flip RGB to BGR, RGBA + to BGRA + PNG_TRANSFORM_SWAP_ALPHA Flip RGBA to ARGB or GA + to AG + PNG_TRANSFORM_INVERT_ALPHA Change alpha from opacity + to transparency + PNG_TRANSFORM_SWAP_ENDIAN Byte-swap 16-bit samples + PNG_TRANSFORM_STRIP_FILLER Strip out filler + bytes (deprecated). + PNG_TRANSFORM_STRIP_FILLER_BEFORE Strip out leading + filler bytes + PNG_TRANSFORM_STRIP_FILLER_AFTER Strip out trailing + filler bytes + +If you have valid image data in the info structure (you can use +png_set_rows() to put image data in the info structure), simply do this: + + png_write_png(png_ptr, info_ptr, png_transforms, NULL) + +where png_transforms is an integer containing the bitwise OR of some set of +transformation flags. This call is equivalent to png_write_info(), +followed the set of transformations indicated by the transform mask, +then png_write_image(), and finally png_write_end(). + +(The final parameter of this call is not yet used. Someday it might point +to transformation parameters required by some future output transform.) + +You must use png_transforms and not call any png_set_transform() functions +when you use png_write_png(). + +The low-level write interface + +If you are going the low-level route instead, you are now ready to +write all the file information up to the actual image data. You do +this with a call to png_write_info(). + + png_write_info(png_ptr, info_ptr); + +Note that there is one transformation you may need to do before +png_write_info(). In PNG files, the alpha channel in an image is the +level of opacity. If your data is supplied as a level of transparency, +you can invert the alpha channel before you write it, so that 0 is +fully transparent and 255 (in 8-bit or paletted images) or 65535 +(in 16-bit images) is fully opaque, with + + png_set_invert_alpha(png_ptr); + +This must appear before png_write_info() instead of later with the +other transformations because in the case of paletted images the tRNS +chunk data has to be inverted before the tRNS chunk is written. If +your image is not a paletted image, the tRNS data (which in such cases +represents a single color to be rendered as transparent) won't need to +be changed, and you can safely do this transformation after your +png_write_info() call. + +If you need to write a private chunk that you want to appear before +the PLTE chunk when PLTE is present, you can write the PNG info in +two steps, and insert code to write your own chunk between them: + + png_write_info_before_PLTE(png_ptr, info_ptr); + png_set_unknown_chunks(png_ptr, info_ptr, ...); + png_write_info(png_ptr, info_ptr); + +After you've written the file information, you can set up the library +to handle any special transformations of the image data. The various +ways to transform the data will be described in the order that they +should occur. This is important, as some of these change the color +type and/or bit depth of the data, and some others only work on +certain color types and bit depths. Even though each transformation +checks to see if it has data that it can do something with, you should +make sure to only enable a transformation if it will be valid for the +data. For example, don't swap red and blue on grayscale data. + +PNG files store RGB pixels packed into 3 or 6 bytes. This code tells +the library to strip input data that has 4 or 8 bytes per pixel down +to 3 or 6 bytes (or strip 2 or 4-byte grayscale+filler data to 1 or 2 +bytes per pixel). + + png_set_filler(png_ptr, 0, PNG_FILLER_BEFORE); + +where the 0 is unused, and the location is either PNG_FILLER_BEFORE or +PNG_FILLER_AFTER, depending upon whether the filler byte in the pixel +is stored XRGB or RGBX. + +PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as +they can, resulting in, for example, 8 pixels per byte for 1 bit files. +If the data is supplied at 1 pixel per byte, use this code, which will +correctly pack the pixels into a single byte: + + png_set_packing(png_ptr); + +PNG files reduce possible bit depths to 1, 2, 4, 8, and 16. If your +data is of another bit depth, you can write an sBIT chunk into the +file so that decoders can recover the original data if desired. + + /* Set the true bit depth of the image data */ + if (color_type & PNG_COLOR_MASK_COLOR) + { + sig_bit.red = true_bit_depth; + sig_bit.green = true_bit_depth; + sig_bit.blue = true_bit_depth; + } + + else + { + sig_bit.gray = true_bit_depth; + } + + if (color_type & PNG_COLOR_MASK_ALPHA) + { + sig_bit.alpha = true_bit_depth; + } + + png_set_sBIT(png_ptr, info_ptr, &sig_bit); + +If the data is stored in the row buffer in a bit depth other than +one supported by PNG (e.g. 3 bit data in the range 0-7 for a 4-bit PNG), +this will scale the values to appear to be the correct bit depth as +is required by PNG. + + png_set_shift(png_ptr, &sig_bit); + +PNG files store 16-bit pixels in network byte order (big-endian, +ie. most significant bits first). This code would be used if they are +supplied the other way (little-endian, i.e. least significant bits +first, the way PCs store them): + + if (bit_depth > 8) + png_set_swap(png_ptr); + +If you are using packed-pixel images (1, 2, or 4 bits/pixel), and you +need to change the order the pixels are packed into bytes, you can use: + + if (bit_depth < 8) + png_set_packswap(png_ptr); + +PNG files store 3 color pixels in red, green, blue order. This code +would be used if they are supplied as blue, green, red: + + png_set_bgr(png_ptr); + +PNG files describe monochrome as black being zero and white being +one. This code would be used if the pixels are supplied with this reversed +(black being one and white being zero): + + png_set_invert_mono(png_ptr); + +Finally, you can write your own transformation function if none of +the existing ones meets your needs. This is done by setting a callback +with + + png_set_write_user_transform_fn(png_ptr, + write_transform_fn); + +You must supply the function + + void write_transform_fn(png_structp png_ptr, png_row_infop + row_info, png_bytep data) + +See pngtest.c for a working example. Your function will be called +before any of the other transformations are processed. If supported +libpng also supplies an information routine that may be called from +your callback: + + png_get_current_row_number(png_ptr); + png_get_current_pass_number(png_ptr); + +This returns the current row passed to the transform. With interlaced +images the value returned is the row in the input sub-image image. Use +PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to +find the output pixel (x,y) given an interlaced sub-image pixel (row,col,pass). + +The discussion of interlace handling above contains more information on how to +use these values. + +You can also set up a pointer to a user structure for use by your +callback function. + + png_set_user_transform_info(png_ptr, user_ptr, 0, 0); + +The user_channels and user_depth parameters of this function are ignored +when writing; you can set them to zero as shown. + +You can retrieve the pointer via the function png_get_user_transform_ptr(). +For example: + + voidp write_user_transform_ptr = + png_get_user_transform_ptr(png_ptr); + +It is possible to have libpng flush any pending output, either manually, +or automatically after a certain number of lines have been written. To +flush the output stream a single time call: + + png_write_flush(png_ptr); + +and to have libpng flush the output stream periodically after a certain +number of scanlines have been written, call: + + png_set_flush(png_ptr, nrows); + +Note that the distance between rows is from the last time png_write_flush() +was called, or the first row of the image if it has never been called. +So if you write 50 lines, and then png_set_flush 25, it will flush the +output on the next scanline, and every 25 lines thereafter, unless +png_write_flush() is called before 25 more lines have been written. +If nrows is too small (less than about 10 lines for a 640 pixel wide +RGB image) the image compression may decrease noticeably (although this +may be acceptable for real-time applications). Infrequent flushing will +only degrade the compression performance by a few percent over images +that do not use flushing. + +Writing the image data + +That's it for the transformations. Now you can write the image data. +The simplest way to do this is in one function call. If you have the +whole image in memory, you can just call png_write_image() and libpng +will write the image. You will need to pass in an array of pointers to +each row. This function automatically handles interlacing, so you don't +need to call png_set_interlace_handling() or call this function multiple +times, or any of that other stuff necessary with png_write_rows(). + + png_write_image(png_ptr, row_pointers); + +where row_pointers is: + + png_byte *row_pointers[height]; + +You can point to void or char or whatever you use for pixels. + +If you don't want to write the whole image at once, you can +use png_write_rows() instead. If the file is not interlaced, +this is simple: + + png_write_rows(png_ptr, row_pointers, + number_of_rows); + +row_pointers is the same as in the png_write_image() call. + +If you are just writing one row at a time, you can do this with +a single row_pointer instead of an array of row_pointers: + + png_bytep row_pointer = row; + + png_write_row(png_ptr, row_pointer); + +When the file is interlaced, things can get a good deal more complicated. +The only currently (as of the PNG Specification version 1.2, dated July +1999) defined interlacing scheme for PNG files is the "Adam7" interlace +scheme, that breaks down an image into seven smaller images of varying +size. libpng will build these images for you, or you can do them +yourself. If you want to build them yourself, see the PNG specification +for details of which pixels to write when. + +If you don't want libpng to handle the interlacing details, just +use png_set_interlace_handling() and call png_write_rows() the +correct number of times to write all the sub-images +(png_set_interlace_handling() returns the number of sub-images.) + +If you want libpng to build the sub-images, call this before you start +writing any rows: + + number_of_passes = png_set_interlace_handling(png_ptr); + +This will return the number of passes needed. Currently, this is seven, +but may change if another interlace type is added. + +Then write the complete image number_of_passes times. + + png_write_rows(png_ptr, row_pointers, number_of_rows); + +Think carefully before you write an interlaced image. Typically code that +reads such images reads all the image data into memory, uncompressed, before +doing any processing. Only code that can display an image on the fly can +take advantage of the interlacing and even then the image has to be exactly +the correct size for the output device, because scaling an image requires +adjacent pixels and these are not available until all the passes have been +read. + +If you do write an interlaced image you will hardly ever need to handle +the interlacing yourself. Call png_set_interlace_handling() and use the +approach described above. + +The only time it is conceivable that you will really need to write an +interlaced image pass-by-pass is when you have read one pass by pass and +made some pixel-by-pixel transformation to it, as described in the read +code above. In this case use the PNG_PASS_ROWS and PNG_PASS_COLS macros +to determine the size of each sub-image in turn and simply write the rows +you obtained from the read code. + +Finishing a sequential write + +After you are finished writing the image, you should finish writing +the file. If you are interested in writing comments or time, you should +pass an appropriately filled png_info pointer. If you are not interested, +you can pass NULL. + + png_write_end(png_ptr, info_ptr); + +When you are done, you can free all memory used by libpng like this: + + png_destroy_write_struct(&png_ptr, &info_ptr); + +It is also possible to individually free the info_ptr members that +point to libpng-allocated storage with the following function: + + png_free_data(png_ptr, info_ptr, mask, seq) + + mask - identifies data to be freed, a mask + containing the bitwise OR of one or + more of + PNG_FREE_PLTE, PNG_FREE_TRNS, + PNG_FREE_HIST, PNG_FREE_ICCP, + PNG_FREE_PCAL, PNG_FREE_ROWS, + PNG_FREE_SCAL, PNG_FREE_SPLT, + PNG_FREE_TEXT, PNG_FREE_UNKN, + or simply PNG_FREE_ALL + + seq - sequence number of item to be freed + (-1 for all items) + +This function may be safely called when the relevant storage has +already been freed, or has not yet been allocated, or was allocated +by the user and not by libpng, and will in those cases do nothing. +The "seq" parameter is ignored if only one item of the selected data +type, such as PLTE, is allowed. If "seq" is not -1, and multiple items +are allowed for the data type identified in the mask, such as text or +sPLT, only the n'th item in the structure is freed, where n is "seq". + +If you allocated data such as a palette that you passed in to libpng +with png_set_*, you must not free it until just before the call to +png_destroy_write_struct(). + +The default behavior is only to free data that was allocated internally +by libpng. This can be changed, so that libpng will not free the data, +or so that it will free data that was allocated by the user with png_malloc() +or png_calloc() and passed in via a png_set_*() function, with + + png_data_freer(png_ptr, info_ptr, freer, mask) + + freer - one of + PNG_DESTROY_WILL_FREE_DATA + PNG_SET_WILL_FREE_DATA + PNG_USER_WILL_FREE_DATA + + mask - which data elements are affected + same choices as in png_free_data() + +For example, to transfer responsibility for some data from a read structure +to a write structure, you could use + + png_data_freer(read_ptr, read_info_ptr, + PNG_USER_WILL_FREE_DATA, + PNG_FREE_PLTE|PNG_FREE_tRNS|PNG_FREE_hIST) + + png_data_freer(write_ptr, write_info_ptr, + PNG_DESTROY_WILL_FREE_DATA, + PNG_FREE_PLTE|PNG_FREE_tRNS|PNG_FREE_hIST) + +thereby briefly reassigning responsibility for freeing to the user but +immediately afterwards reassigning it once more to the write_destroy +function. Having done this, it would then be safe to destroy the read +structure and continue to use the PLTE, tRNS, and hIST data in the write +structure. + +This function only affects data that has already been allocated. +You can call this function before calling after the png_set_*() functions +to control whether the user or png_destroy_*() is supposed to free the data. +When the user assumes responsibility for libpng-allocated data, the +application must use +png_free() to free it, and when the user transfers responsibility to libpng +for data that the user has allocated, the user must have used png_malloc() +or png_calloc() to allocate it. + +If you allocated text_ptr.text, text_ptr.lang, and text_ptr.translated_keyword +separately, do not transfer responsibility for freeing text_ptr to libpng, +because when libpng fills a png_text structure it combines these members with +the key member, and png_free_data() will free only text_ptr.key. Similarly, +if you transfer responsibility for free'ing text_ptr from libpng to your +application, your application must not separately free those members. +For a more compact example of writing a PNG image, see the file example.c. + +V. Simplified API + +The simplified API, which became available in libpng-1.6.0, hides the details +of both libpng and the PNG file format itself. +It allows PNG files to be read into a very limited number of +in-memory bitmap formats or to be written from the same formats. If these +formats do not accomodate your needs then you can, and should, use the more +sophisticated APIs above - these support a wide variety of in-memory formats +and a wide variety of sophisticated transformations to those formats as well +as a wide variety of APIs to manipulate ancilliary information. + +To read a PNG file using the simplified API: + + 1) Declare a 'png_image' structure (see below) on the + stack and memset() it to all zero. + + 2) Call the appropriate png_image_begin_read... function. + + 3) Set the png_image 'format' member to the required + format and allocate a buffer for the image. + + 4) Call png_image_finish_read to read the image into + your buffer. + +There are no restrictions on the format of the PNG input itself; all valid +color types, bit depths, and interlace methods are acceptable, and the +input image is transformed as necessary to the requested in-memory format +during the png_image_finish_read() step. + +To write a PNG file using the simplified API: + + 1) Declare a 'png_image' structure on the stack and memset() + it to all zero. + + 2) Initialize the members of the structure that describe the + image, setting the 'format' member to the format of the + image in memory. + + 3) Call the appropriate png_image_write... function with a + pointer to the image to write the PNG data. + +png_image is a structure that describes the in-memory format of an image +when it is being read or define the in-memory format of an image that you +need to write. The "png_image" structure contains the following members: + + png_uint_32 version Set to PNG_IMAGE_VERSION + png_uint_32 width Image width in pixels (columns) + png_uint_32 height Image height in pixels (rows) + png_uint_32 format Image format as defined below + png_uint_32 flags A bit mask containing informational flags + png_controlp opaque Initialize to NULL, free with png_image_free + png_uint_32 colormap_entries; Number of entries in the color-map + png_uint_32 warning_or_error; + char message[64]; + +In the event of an error or warning the following field warning_or_error +field will be set to a non-zero value and the 'message' field will contain +a '\0' terminated string with the libpng error or warning message. If both +warnings and an error were encountered, only the error is recorded. If there +are multiple warnings, only the first one is recorded. + +The upper 30 bits of this value are reserved; the low two bits contain +a two bit code such that a value more than 1 indicates a failure in the API +just called: + + 0 - no warning or error + 1 - warning + 2 - error + 3 - error preceded by warning + +The pixels (samples) of the image have one to four channels whose components +have original values in the range 0 to 1.0: + + 1: A single gray or luminance channel (G). + 2: A gray/luminance channel and an alpha channel (GA). + 3: Three red, green, blue color channels (RGB). + 4: Three color channels and an alpha channel (RGBA). + +The channels are encoded in one of two ways: + + a) As a small integer, value 0..255, contained in a single byte. For the +alpha channel the original value is simply value/255. For the color or +luminance channels the value is encoded according to the sRGB specification +and matches the 8-bit format expected by typical display devices. + +The color/gray channels are not scaled (pre-multiplied) by the alpha +channel and are suitable for passing to color management software. + + b) As a value in the range 0..65535, contained in a 2-byte integer. All +channels can be converted to the original value by dividing by 65535; all +channels are linear. Color channels use the RGB encoding (RGB end-points) of +the sRGB specification. This encoding is identified by the +PNG_FORMAT_FLAG_LINEAR flag below. + +When an alpha channel is present it is expected to denote pixel coverage +of the color or luminance channels and is returned as an associated alpha +channel: the color/gray channels are scaled (pre-multiplied) by the alpha +value. + +When a color-mapped image is used as a result of calling +png_image_read_colormap or png_image_write_colormap the channels are encoded +in the color-map and the descriptions above apply to the color-map entries. +The image data is encoded as small integers, value 0..255, that index the +entries in the color-map. One integer (one byte) is stored for each pixel. + +PNG_FORMAT_* + +The #defines to be used in png_image::format. Each #define identifies a +particular layout of channel data and, if present, alpha values. There are +separate defines for each of the two channel encodings. + +A format is built up using single bit flag values. Not all combinations are +valid: use the bit flag values below for testing a format returned by the +read APIs, but set formats from the derived values. + +When reading or writing color-mapped images the format should be set to the +format of the entries in the color-map then png_image_{read,write}_colormap +called to read or write the color-map and set the format correctly for the +image data. Do not set the PNG_FORMAT_FLAG_COLORMAP bit directly! + +NOTE: libpng can be built with particular features disabled, if you see +compiler errors because the definition of one of the following flags has been +compiled out it is because libpng does not have the required support. It is +possible, however, for the libpng configuration to enable the format on just +read or just write; in that case you may see an error at run time. You can +guard against this by checking for the definition of: + + PNG_SIMPLIFIED_{READ,WRITE}_{BGR,AFIRST}_SUPPORTED + + PNG_FORMAT_FLAG_ALPHA 0x01 format with an alpha channel + PNG_FORMAT_FLAG_COLOR 0x02 color format: otherwise grayscale + PNG_FORMAT_FLAG_LINEAR 0x04 png_uint_16 channels else png_byte + PNG_FORMAT_FLAG_COLORMAP 0x08 libpng use only + PNG_FORMAT_FLAG_BGR 0x10 BGR colors, else order is RGB + PNG_FORMAT_FLAG_AFIRST 0x20 alpha channel comes first + +Supported formats are as follows. Future versions of libpng may support more +formats; for compatibility with older versions simply check if the format +macro is defined using #ifdef. These defines describe the in-memory layout +of the components of the pixels of the image. + +First the single byte formats: + + PNG_FORMAT_GRAY 0 + PNG_FORMAT_GA PNG_FORMAT_FLAG_ALPHA + PNG_FORMAT_AG (PNG_FORMAT_GA|PNG_FORMAT_FLAG_AFIRST) + PNG_FORMAT_RGB PNG_FORMAT_FLAG_COLOR + PNG_FORMAT_BGR (PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_BGR) + PNG_FORMAT_RGBA (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_ALPHA) + PNG_FORMAT_ARGB (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_AFIRST) + PNG_FORMAT_BGRA (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_ALPHA) + PNG_FORMAT_ABGR (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_AFIRST) + +Then the linear 2-byte formats. When naming these "Y" is used to +indicate a luminance (gray) channel. The component order within the pixel +is always the same - there is no provision for swapping the order of the +components in the linear format. + + PNG_FORMAT_LINEAR_Y PNG_FORMAT_FLAG_LINEAR + PNG_FORMAT_LINEAR_Y_ALPHA + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_ALPHA) + PNG_FORMAT_LINEAR_RGB + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR) + PNG_FORMAT_LINEAR_RGB_ALPHA + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR| + PNG_FORMAT_FLAG_ALPHA) + +Color-mapped formats are obtained by calling png_image_{read,write}_colormap, +as appropriate after setting png_image::format to the format of the color-map +to be read or written. Applications may check the value of +PNG_FORMAT_FLAG_COLORMAP to see if they have called the colormap API. The +format of the color-map may be extracted using the following macro. + + PNG_FORMAT_OF_COLORMAP(fmt) ((fmt) & ~PNG_FORMAT_FLAG_COLORMAP) + +PNG_IMAGE macros + +These are convenience macros to derive information from a png_image +structure. The PNG_IMAGE_SAMPLE_ macros return values appropriate to the +actual image sample values - either the entries in the color-map or the +pixels in the image. The PNG_IMAGE_PIXEL_ macros return corresponding values +for the pixels and will always return 1 after a call to +png_image_{read,write}_colormap. The remaining macros return information +about the rows in the image and the complete image. + +NOTE: All the macros that take a png_image::format parameter are compile time +constants if the format parameter is, itself, a constant. Therefore these +macros can be used in array declarations and case labels where required. +Similarly the macros are also pre-processor constants (sizeof is not used) so +they can be used in #if tests. + +First the information about the samples. + + PNG_IMAGE_SAMPLE_CHANNELS(fmt) + Returns the total number of channels in a given format: 1..4 + + PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt) + Returns the size in bytes of a single component of a pixel or color-map + entry (as appropriate) in the image. + + PNG_IMAGE_SAMPLE_SIZE(fmt) + This is the size of the sample data for one sample. If the image is + color-mapped it is the size of one color-map entry (and image pixels are + one byte in size), otherwise it is the size of one image pixel. + + PNG_IMAGE_COLORMAP_SIZE(fmt) + The size of the color-map required by the format; this is the size of the + color-map buffer passed to the png_image_{read,write}_colormap APIs, it is + a fixed number determined by the format so can easily be allocated on the + stack if necessary. + +#define PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * 256) + /* The maximum size of the color-map required by the format expressed in a + * count of components. This can be used to compile-time allocate a + * color-map: + * + * png_uint_16 colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(linear_fmt)]; + * + * png_byte colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(sRGB_fmt)]; + * + * Alternatively use the PNG_IMAGE_COLORMAP_SIZE macro below to use the + * information from one of the png_image_begin_read_ APIs and dynamically + * allocate the required memory. + */ + + +Corresponding information about the pixels + + PNG_IMAGE_PIXEL_(test,fmt) + + PNG_IMAGE_PIXEL_CHANNELS(fmt) + The number of separate channels (components) in a pixel; 1 for a + color-mapped image. + + PNG_IMAGE_PIXEL_COMPONENT_SIZE(fmt)\ + The size, in bytes, of each component in a pixel; 1 for a color-mapped + image. + + PNG_IMAGE_PIXEL_SIZE(fmt) + The size, in bytes, of a complete pixel; 1 for a color-mapped image. + +Information about the whole row, or whole image + + PNG_IMAGE_ROW_STRIDE(image) + Returns the total number of components in a single row of the image; this + is the minimum 'row stride', the minimum count of components between each + row. For a color-mapped image this is the minimum number of bytes in a + row. + + PNG_IMAGE_BUFFER_SIZE(image, row_stride) + Returns the size, in bytes, of an image buffer given a png_image and a row + stride - the number of components to leave space for in each row. + + PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB == 0x01 + This indicates the the RGB values of the in-memory bitmap do not + correspond to the red, green and blue end-points defined by sRGB. + + PNG_IMAGE_FLAG_COLORMAP == 0x02 + The PNG is color-mapped. If this flag is set png_image_read_colormap + can be used without further loss of image information. If it is not set + png_image_read_colormap will cause significant loss if the image has any + +READ APIs + + The png_image passed to the read APIs must have been initialized by setting + the png_controlp field 'opaque' to NULL (or, better, memset the whole thing.) + + int png_image_begin_read_from_file( png_imagep image, + const char *file_name) + + The named file is opened for read and the image header + is filled in from the PNG header in the file. + + int png_image_begin_read_from_stdio (png_imagep image, + FILE* file) + + The PNG header is read from the stdio FILE object. + + int png_image_begin_read_from_memory(png_imagep image, + png_const_voidp memory, png_size_t size) + + The PNG header is read from the given memory buffer. + + int png_image_finish_read(png_imagep image, + png_colorp background, void *buffer, + png_int_32 row_stride, void *colormap)); + + Finish reading the image into the supplied buffer and + clean up the png_image structure. + + row_stride is the step, in png_byte or png_uint_16 units + as appropriate, between adjacent rows. A positive stride + indicates that the top-most row is first in the buffer - + the normal top-down arrangement. A negative stride + indicates that the bottom-most row is first in the buffer. + + background need only be supplied if an alpha channel must + be removed from a png_byte format and the removal is to be + done by compositing on a solid color; otherwise it may be + NULL and any composition will be done directly onto the + buffer. The value is an sRGB color to use for the + background, for grayscale output the green channel is used. + + For linear output removing the alpha channel is always done + by compositing on black. + + void png_image_free(png_imagep image) + + Free any data allocated by libpng in image->opaque, + setting the pointer to NULL. May be called at any time + after the structure is initialized. + +When the simplified API needs to convert between sRGB and linear colorspaces, +the actual sRGB transfer curve defined in the sRGB specification (see the +article at http://en.wikipedia.org/wiki/SRGB) is used, not the gamma=1/2.2 +approximation used elsewhere in libpng. + +WRITE APIS + +For write you must initialize a png_image structure to describe the image to +be written: + + version: must be set to PNG_IMAGE_VERSION + opaque: must be initialized to NULL + width: image width in pixels + height: image height in rows + format: the format of the data you wish to write + flags: set to 0 unless one of the defined flags applies; set + PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB for color format images + where the RGB values do not correspond to the colors in sRGB. + colormap_entries: set to the number of entries in the color-map (0 to 256) + + int png_image_write_to_file, (png_imagep image, + const char *file, int convert_to_8bit, const void *buffer, + png_int_32 row_stride, const void *colormap)); + + Write the image to the named file. + + int png_image_write_to_stdio(png_imagep image, FILE *file, + int convert_to_8_bit, const void *buffer, + png_int_32 row_stride, const void *colormap) + + Write the image to the given (FILE*). + +With all write APIs if image is in one of the linear formats with +(png_uint_16) data then setting convert_to_8_bit will cause the output to be +a (png_byte) PNG gamma encoded according to the sRGB specification, otherwise +a 16-bit linear encoded PNG file is written. + +With all APIs row_stride is handled as in the read APIs - it is the spacing +from one row to the next in component sized units (float) and if negative +indicates a bottom-up row layout in the buffer. + +Note that the write API does not support interlacing, sub-8-bit pixels, +and indexed (paletted) images. + +VI. Modifying/Customizing libpng + +There are two issues here. The first is changing how libpng does +standard things like memory allocation, input/output, and error handling. +The second deals with more complicated things like adding new chunks, +adding new transformations, and generally changing how libpng works. +Both of those are compile-time issues; that is, they are generally +determined at the time the code is written, and there is rarely a need +to provide the user with a means of changing them. + +Memory allocation, input/output, and error handling + +All of the memory allocation, input/output, and error handling in libpng +goes through callbacks that are user-settable. The default routines are +in pngmem.c, pngrio.c, pngwio.c, and pngerror.c, respectively. To change +these functions, call the appropriate png_set_*_fn() function. + +Memory allocation is done through the functions png_malloc(), png_calloc(), +and png_free(). The png_malloc() and png_free() functions currently just +call the standard C functions and png_calloc() calls png_malloc() and then +clears the newly allocated memory to zero; note that png_calloc(png_ptr, size) +is not the same as the calloc(number, size) function provided by stdlib.h. +There is limited support for certain systems with segmented memory +architectures and the types of pointers declared by png.h match this; you +will have to use appropriate pointers in your application. Since it is +unlikely that the method of handling memory allocation on a platform +will change between applications, these functions must be modified in +the library at compile time. If you prefer to use a different method +of allocating and freeing data, you can use png_create_read_struct_2() or +png_create_write_struct_2() to register your own functions as described +above. These functions also provide a void pointer that can be retrieved +via + + mem_ptr=png_get_mem_ptr(png_ptr); + +Your replacement memory functions must have prototypes as follows: + + png_voidp malloc_fn(png_structp png_ptr, + png_alloc_size_t size); + + void free_fn(png_structp png_ptr, png_voidp ptr); + +Your malloc_fn() must return NULL in case of failure. The png_malloc() +function will normally call png_error() if it receives a NULL from the +system memory allocator or from your replacement malloc_fn(). + +Your free_fn() will never be called with a NULL ptr, since libpng's +png_free() checks for NULL before calling free_fn(). + +Input/Output in libpng is done through png_read() and png_write(), +which currently just call fread() and fwrite(). The FILE * is stored in +png_struct and is initialized via png_init_io(). If you wish to change +the method of I/O, the library supplies callbacks that you can set +through the function png_set_read_fn() and png_set_write_fn() at run +time, instead of calling the png_init_io() function. These functions +also provide a void pointer that can be retrieved via the function +png_get_io_ptr(). For example: + + png_set_read_fn(png_structp read_ptr, + voidp read_io_ptr, png_rw_ptr read_data_fn) + + png_set_write_fn(png_structp write_ptr, + voidp write_io_ptr, png_rw_ptr write_data_fn, + png_flush_ptr output_flush_fn); + + voidp read_io_ptr = png_get_io_ptr(read_ptr); + voidp write_io_ptr = png_get_io_ptr(write_ptr); + +The replacement I/O functions must have prototypes as follows: + + void user_read_data(png_structp png_ptr, + png_bytep data, png_size_t length); + + void user_write_data(png_structp png_ptr, + png_bytep data, png_size_t length); + + void user_flush_data(png_structp png_ptr); + +The user_read_data() function is responsible for detecting and +handling end-of-data errors. + +Supplying NULL for the read, write, or flush functions sets them back +to using the default C stream functions, which expect the io_ptr to +point to a standard *FILE structure. It is probably a mistake +to use NULL for one of write_data_fn and output_flush_fn but not both +of them, unless you have built libpng with PNG_NO_WRITE_FLUSH defined. +It is an error to read from a write stream, and vice versa. + +Error handling in libpng is done through png_error() and png_warning(). +Errors handled through png_error() are fatal, meaning that png_error() +should never return to its caller. Currently, this is handled via +setjmp() and longjmp() (unless you have compiled libpng with +PNG_NO_SETJMP, in which case it is handled via PNG_ABORT()), +but you could change this to do things like exit() if you should wish, +as long as your function does not return. + +On non-fatal errors, png_warning() is called +to print a warning message, and then control returns to the calling code. +By default png_error() and png_warning() print a message on stderr via +fprintf() unless the library is compiled with PNG_NO_CONSOLE_IO defined +(because you don't want the messages) or PNG_NO_STDIO defined (because +fprintf() isn't available). If you wish to change the behavior of the error +functions, you will need to set up your own message callbacks. These +functions are normally supplied at the time that the png_struct is created. +It is also possible to redirect errors and warnings to your own replacement +functions after png_create_*_struct() has been called by calling: + + png_set_error_fn(png_structp png_ptr, + png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warning_fn); + + png_voidp error_ptr = png_get_error_ptr(png_ptr); + +If NULL is supplied for either error_fn or warning_fn, then the libpng +default function will be used, calling fprintf() and/or longjmp() if a +problem is encountered. The replacement error functions should have +parameters as follows: + + void user_error_fn(png_structp png_ptr, + png_const_charp error_msg); + + void user_warning_fn(png_structp png_ptr, + png_const_charp warning_msg); + +The motivation behind using setjmp() and longjmp() is the C++ throw and +catch exception handling methods. This makes the code much easier to write, +as there is no need to check every return code of every function call. +However, there are some uncertainties about the status of local variables +after a longjmp, so the user may want to be careful about doing anything +after setjmp returns non-zero besides returning itself. Consult your +compiler documentation for more details. For an alternative approach, you +may wish to use the "cexcept" facility (see http://cexcept.sourceforge.net), +which is illustrated in pngvalid.c and in contrib/visupng. + +Beginning in libpng-1.4.0, the png_set_benign_errors() API became available. +You can use this to handle certain errors (normally handled as errors) +as warnings. + + png_set_benign_errors (png_ptr, int allowed); + + allowed: 0: (default) treat png_benign_error() an error. + 1: treat png_benign_error() as a warning. + +Custom chunks + +If you need to read or write custom chunks, you may need to get deeper +into the libpng code. The library now has mechanisms for storing +and writing chunks of unknown type; you can even declare callbacks +for custom chunks. However, this may not be good enough if the +library code itself needs to know about interactions between your +chunk and existing `intrinsic' chunks. + +If you need to write a new intrinsic chunk, first read the PNG +specification. Acquire a first level of understanding of how it works. +Pay particular attention to the sections that describe chunk names, +and look at how other chunks were designed, so you can do things +similarly. Second, check out the sections of libpng that read and +write chunks. Try to find a chunk that is similar to yours and use +it as a template. More details can be found in the comments inside +the code. It is best to handle private or unknown chunks in a generic method, +via callback functions, instead of by modifying libpng functions. This +is illustrated in pngtest.c, which uses a callback function to handle a +private "vpAg" chunk and the new "sTER" chunk, which are both unknown to +libpng. + +If you wish to write your own transformation for the data, look through +the part of the code that does the transformations, and check out some of +the simpler ones to get an idea of how they work. Try to find a similar +transformation to the one you want to add and copy off of it. More details +can be found in the comments inside the code itself. + +Configuring for 16-bit platforms + +You will want to look into zconf.h to tell zlib (and thus libpng) that +it cannot allocate more then 64K at a time. Even if you can, the memory +won't be accessible. So limit zlib and libpng to 64K by defining MAXSEG_64K. + +Configuring for DOS + +For DOS users who only have access to the lower 640K, you will +have to limit zlib's memory usage via a png_set_compression_mem_level() +call. See zlib.h or zconf.h in the zlib library for more information. + +Configuring for Medium Model + +Libpng's support for medium model has been tested on most of the popular +compilers. Make sure MAXSEG_64K gets defined, USE_FAR_KEYWORD gets +defined, and FAR gets defined to far in pngconf.h, and you should be +all set. Everything in the library (except for zlib's structure) is +expecting far data. You must use the typedefs with the p or pp on +the end for pointers (or at least look at them and be careful). Make +note that the rows of data are defined as png_bytepp, which is +an "unsigned char far * far *". + +Configuring for gui/windowing platforms: + +You will need to write new error and warning functions that use the GUI +interface, as described previously, and set them to be the error and +warning functions at the time that png_create_*_struct() is called, +in order to have them available during the structure initialization. +They can be changed later via png_set_error_fn(). On some compilers, +you may also have to change the memory allocators (png_malloc, etc.). + +Configuring for compiler xxx: + +All includes for libpng are in pngconf.h. If you need to add, change +or delete an include, this is the place to do it. +The includes that are not needed outside libpng are placed in pngpriv.h, +which is only used by the routines inside libpng itself. +The files in libpng proper only include pngpriv.h and png.h, which +in turn includes pngconf.h and, as of libpng-1.5.0, pnglibconf.h. +As of libpng-1.5.0, pngpriv.h also includes three other private header +files, pngstruct.h, pnginfo.h, and pngdebug.h, which contain material +that previously appeared in the public headers. + +Configuring zlib: + +There are special functions to configure the compression. Perhaps the +most useful one changes the compression level, which currently uses +input compression values in the range 0 - 9. The library normally +uses the default compression level (Z_DEFAULT_COMPRESSION = 6). Tests +have shown that for a large majority of images, compression values in +the range 3-6 compress nearly as well as higher levels, and do so much +faster. For online applications it may be desirable to have maximum speed +(Z_BEST_SPEED = 1). With versions of zlib after v0.99, you can also +specify no compression (Z_NO_COMPRESSION = 0), but this would create +files larger than just storing the raw bitmap. You can specify the +compression level by calling: + + #include zlib.h + png_set_compression_level(png_ptr, level); + +Another useful one is to reduce the memory level used by the library. +The memory level defaults to 8, but it can be lowered if you are +short on memory (running DOS, for example, where you only have 640K). +Note that the memory level does have an effect on compression; among +other things, lower levels will result in sections of incompressible +data being emitted in smaller stored blocks, with a correspondingly +larger relative overhead of up to 15% in the worst case. + + #include zlib.h + png_set_compression_mem_level(png_ptr, level); + +The other functions are for configuring zlib. They are not recommended +for normal use and may result in writing an invalid PNG file. See +zlib.h for more information on what these mean. + + #include zlib.h + png_set_compression_strategy(png_ptr, + strategy); + + png_set_compression_window_bits(png_ptr, + window_bits); + + png_set_compression_method(png_ptr, method); + + png_set_compression_buffer_size(png_ptr, size); + +As of libpng version 1.5.4, additional APIs became +available to set these separately for non-IDAT +compressed chunks such as zTXt, iTXt, and iCCP: + + #include zlib.h + #if PNG_LIBPNG_VER >= 10504 + png_set_text_compression_level(png_ptr, level); + + png_set_text_compression_mem_level(png_ptr, level); + + png_set_text_compression_strategy(png_ptr, + strategy); + + png_set_text_compression_window_bits(png_ptr, + window_bits); + + png_set_text_compression_method(png_ptr, method); + #endif + +Controlling row filtering + +If you want to control whether libpng uses filtering or not, which +filters are used, and how it goes about picking row filters, you +can call one of these functions. The selection and configuration +of row filters can have a significant impact on the size and +encoding speed and a somewhat lesser impact on the decoding speed +of an image. Filtering is enabled by default for RGB and grayscale +images (with and without alpha), but not for paletted images nor +for any images with bit depths less than 8 bits/pixel. + +The 'method' parameter sets the main filtering method, which is +currently only '0' in the PNG 1.2 specification. The 'filters' +parameter sets which filter(s), if any, should be used for each +scanline. Possible values are PNG_ALL_FILTERS and PNG_NO_FILTERS +to turn filtering on and off, respectively. + +Individual filter types are PNG_FILTER_NONE, PNG_FILTER_SUB, +PNG_FILTER_UP, PNG_FILTER_AVG, PNG_FILTER_PAETH, which can be bitwise +ORed together with '|' to specify one or more filters to use. +These filters are described in more detail in the PNG specification. +If you intend to change the filter type during the course of writing +the image, you should start with flags set for all of the filters +you intend to use so that libpng can initialize its internal +structures appropriately for all of the filter types. (Note that this +means the first row must always be adaptively filtered, because libpng +currently does not allocate the filter buffers until png_write_row() +is called for the first time.) + + filters = PNG_FILTER_NONE | PNG_FILTER_SUB + PNG_FILTER_UP | PNG_FILTER_AVG | + PNG_FILTER_PAETH | PNG_ALL_FILTERS; + + png_set_filter(png_ptr, PNG_FILTER_TYPE_BASE, + filters); + The second parameter can also be + PNG_INTRAPIXEL_DIFFERENCING if you are + writing a PNG to be embedded in a MNG + datastream. This parameter must be the + same as the value of filter_method used + in png_set_IHDR(). + +It is also possible to influence how libpng chooses from among the +available filters. This is done in one or both of two ways - by +telling it how important it is to keep the same filter for successive +rows, and by telling it the relative computational costs of the filters. + + double weights[3] = {1.5, 1.3, 1.1}, + costs[PNG_FILTER_VALUE_LAST] = + {1.0, 1.3, 1.3, 1.5, 1.7}; + + png_set_filter_heuristics(png_ptr, + PNG_FILTER_HEURISTIC_WEIGHTED, 3, + weights, costs); + +The weights are multiplying factors that indicate to libpng that the +row filter should be the same for successive rows unless another row filter +is that many times better than the previous filter. In the above example, +if the previous 3 filters were SUB, SUB, NONE, the SUB filter could have a +"sum of absolute differences" 1.5 x 1.3 times higher than other filters +and still be chosen, while the NONE filter could have a sum 1.1 times +higher than other filters and still be chosen. Unspecified weights are +taken to be 1.0, and the specified weights should probably be declining +like those above in order to emphasize recent filters over older filters. + +The filter costs specify for each filter type a relative decoding cost +to be considered when selecting row filters. This means that filters +with higher costs are less likely to be chosen over filters with lower +costs, unless their "sum of absolute differences" is that much smaller. +The costs do not necessarily reflect the exact computational speeds of +the various filters, since this would unduly influence the final image +size. + +Note that the numbers above were invented purely for this example and +are given only to help explain the function usage. Little testing has +been done to find optimum values for either the costs or the weights. + +Removing unwanted object code + +There are a bunch of #define's in pngconf.h that control what parts of +libpng are compiled. All the defines end in _SUPPORTED. If you are +never going to use a capability, you can change the #define to #undef +before recompiling libpng and save yourself code and data space, or +you can turn off individual capabilities with defines that begin with +PNG_NO_. + +In libpng-1.5.0 and later, the #define's are in pnglibconf.h instead. + +You can also turn all of the transforms and ancillary chunk capabilities +off en masse with compiler directives that define +PNG_NO_READ[or WRITE]_TRANSFORMS, or PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS, +or all four, +along with directives to turn on any of the capabilities that you do +want. The PNG_NO_READ[or WRITE]_TRANSFORMS directives disable the extra +transformations but still leave the library fully capable of reading +and writing PNG files with all known public chunks. Use of the +PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS directive produces a library +that is incapable of reading or writing ancillary chunks. If you are +not using the progressive reading capability, you can turn that off +with PNG_NO_PROGRESSIVE_READ (don't confuse this with the INTERLACING +capability, which you'll still have). + +All the reading and writing specific code are in separate files, so the +linker should only grab the files it needs. However, if you want to +make sure, or if you are building a stand alone library, all the +reading files start with "pngr" and all the writing files start with "pngw". +The files that don't match either (like png.c, pngtrans.c, etc.) +are used for both reading and writing, and always need to be included. +The progressive reader is in pngpread.c + +If you are creating or distributing a dynamically linked library (a .so +or DLL file), you should not remove or disable any parts of the library, +as this will cause applications linked with different versions of the +library to fail if they call functions not available in your library. +The size of the library itself should not be an issue, because only +those sections that are actually used will be loaded into memory. + +Requesting debug printout + +The macro definition PNG_DEBUG can be used to request debugging +printout. Set it to an integer value in the range 0 to 3. Higher +numbers result in increasing amounts of debugging information. The +information is printed to the "stderr" file, unless another file +name is specified in the PNG_DEBUG_FILE macro definition. + +When PNG_DEBUG > 0, the following functions (macros) become available: + + png_debug(level, message) + png_debug1(level, message, p1) + png_debug2(level, message, p1, p2) + +in which "level" is compared to PNG_DEBUG to decide whether to print +the message, "message" is the formatted string to be printed, +and p1 and p2 are parameters that are to be embedded in the string +according to printf-style formatting directives. For example, + + png_debug1(2, "foo=%d\n", foo); + +is expanded to + + if (PNG_DEBUG > 2) + fprintf(PNG_DEBUG_FILE, "foo=%d\n", foo); + +When PNG_DEBUG is defined but is zero, the macros aren't defined, but you +can still use PNG_DEBUG to control your own debugging: + + #ifdef PNG_DEBUG + fprintf(stderr, ... + #endif + +When PNG_DEBUG = 1, the macros are defined, but only png_debug statements +having level = 0 will be printed. There aren't any such statements in +this version of libpng, but if you insert some they will be printed. + +Prepending a prefix to exported symbols + +Starting with libpng-1.6.0, you can configure libpng (when using the +"configure" script) to prefix all exported symbols by means of the +configuration option "--with-libpng-prefix=FOO_", where FOO_ can be any +string beginning with a letter and containing only uppercase +and lowercase letters, digits, and the underscore (i.e., a C language +identifier). This creates a set of macros in pnglibconf.h, so this is +transparent to applications; their function calls get transformed by +the macros to use the modified names. + +VII. MNG support + +The MNG specification (available at http://www.libpng.org/pub/mng) allows +certain extensions to PNG for PNG images that are embedded in MNG datastreams. +Libpng can support some of these extensions. To enable them, use the +png_permit_mng_features() function: + + feature_set = png_permit_mng_features(png_ptr, mask) + + mask is a png_uint_32 containing the bitwise OR of the + features you want to enable. These include + PNG_FLAG_MNG_EMPTY_PLTE + PNG_FLAG_MNG_FILTER_64 + PNG_ALL_MNG_FEATURES + + feature_set is a png_uint_32 that is the bitwise AND of + your mask with the set of MNG features that is + supported by the version of libpng that you are using. + +It is an error to use this function when reading or writing a standalone +PNG file with the PNG 8-byte signature. The PNG datastream must be wrapped +in a MNG datastream. As a minimum, it must have the MNG 8-byte signature +and the MHDR and MEND chunks. Libpng does not provide support for these +or any other MNG chunks; your application must provide its own support for +them. You may wish to consider using libmng (available at +http://www.libmng.com) instead. + +VIII. Changes to Libpng from version 0.88 + +It should be noted that versions of libpng later than 0.96 are not +distributed by the original libpng author, Guy Schalnat, nor by +Andreas Dilger, who had taken over from Guy during 1996 and 1997, and +distributed versions 0.89 through 0.96, but rather by another member +of the original PNG Group, Glenn Randers-Pehrson. Guy and Andreas are +still alive and well, but they have moved on to other things. + +The old libpng functions png_read_init(), png_write_init(), +png_info_init(), png_read_destroy(), and png_write_destroy() have been +moved to PNG_INTERNAL in version 0.95 to discourage their use. These +functions will be removed from libpng version 1.4.0. + +The preferred method of creating and initializing the libpng structures is +via the png_create_read_struct(), png_create_write_struct(), and +png_create_info_struct() because they isolate the size of the structures +from the application, allow version error checking, and also allow the +use of custom error handling routines during the initialization, which +the old functions do not. The functions png_read_destroy() and +png_write_destroy() do not actually free the memory that libpng +allocated for these structs, but just reset the data structures, so they +can be used instead of png_destroy_read_struct() and +png_destroy_write_struct() if you feel there is too much system overhead +allocating and freeing the png_struct for each image read. + +Setting the error callbacks via png_set_message_fn() before +png_read_init() as was suggested in libpng-0.88 is no longer supported +because this caused applications that do not use custom error functions +to fail if the png_ptr was not initialized to zero. It is still possible +to set the error callbacks AFTER png_read_init(), or to change them with +png_set_error_fn(), which is essentially the same function, but with a new +name to force compilation errors with applications that try to use the old +method. + +Starting with version 1.0.7, you can find out which version of the library +you are using at run-time: + + png_uint_32 libpng_vn = png_access_version_number(); + +The number libpng_vn is constructed from the major version, minor +version with leading zero, and release number with leading zero, +(e.g., libpng_vn for version 1.0.7 is 10007). + +Note that this function does not take a png_ptr, so you can call it +before you've created one. + +You can also check which version of png.h you used when compiling your +application: + + png_uint_32 application_vn = PNG_LIBPNG_VER; + +IX. Changes to Libpng from version 1.0.x to 1.2.x + +Support for user memory management was enabled by default. To +accomplish this, the functions png_create_read_struct_2(), +png_create_write_struct_2(), png_set_mem_fn(), png_get_mem_ptr(), +png_malloc_default(), and png_free_default() were added. + +Support for the iTXt chunk has been enabled by default as of +version 1.2.41. + +Support for certain MNG features was enabled. + +Support for numbered error messages was added. However, we never got +around to actually numbering the error messages. The function +png_set_strip_error_numbers() was added (Note: the prototype for this +function was inadvertently removed from png.h in PNG_NO_ASSEMBLER_CODE +builds of libpng-1.2.15. It was restored in libpng-1.2.36). + +The png_malloc_warn() function was added at libpng-1.2.3. This issues +a png_warning and returns NULL instead of aborting when it fails to +acquire the requested memory allocation. + +Support for setting user limits on image width and height was enabled +by default. The functions png_set_user_limits(), png_get_user_width_max(), +and png_get_user_height_max() were added at libpng-1.2.6. + +The png_set_add_alpha() function was added at libpng-1.2.7. + +The function png_set_expand_gray_1_2_4_to_8() was added at libpng-1.2.9. +Unlike png_set_gray_1_2_4_to_8(), the new function does not expand the +tRNS chunk to alpha. The png_set_gray_1_2_4_to_8() function is +deprecated. + +A number of macro definitions in support of runtime selection of +assembler code features (especially Intel MMX code support) were +added at libpng-1.2.0: + + PNG_ASM_FLAG_MMX_SUPPORT_COMPILED + PNG_ASM_FLAG_MMX_SUPPORT_IN_CPU + PNG_ASM_FLAG_MMX_READ_COMBINE_ROW + PNG_ASM_FLAG_MMX_READ_INTERLACE + PNG_ASM_FLAG_MMX_READ_FILTER_SUB + PNG_ASM_FLAG_MMX_READ_FILTER_UP + PNG_ASM_FLAG_MMX_READ_FILTER_AVG + PNG_ASM_FLAG_MMX_READ_FILTER_PAETH + PNG_ASM_FLAGS_INITIALIZED + PNG_MMX_READ_FLAGS + PNG_MMX_FLAGS + PNG_MMX_WRITE_FLAGS + PNG_MMX_FLAGS + +We added the following functions in support of runtime +selection of assembler code features: + + png_get_mmx_flagmask() + png_set_mmx_thresholds() + png_get_asm_flags() + png_get_mmx_bitdepth_threshold() + png_get_mmx_rowbytes_threshold() + png_set_asm_flags() + +We replaced all of these functions with simple stubs in libpng-1.2.20, +when the Intel assembler code was removed due to a licensing issue. + +These macros are deprecated: + + PNG_READ_TRANSFORMS_NOT_SUPPORTED + PNG_PROGRESSIVE_READ_NOT_SUPPORTED + PNG_NO_SEQUENTIAL_READ_SUPPORTED + PNG_WRITE_TRANSFORMS_NOT_SUPPORTED + PNG_READ_ANCILLARY_CHUNKS_NOT_SUPPORTED + PNG_WRITE_ANCILLARY_CHUNKS_NOT_SUPPORTED + +They have been replaced, respectively, by: + + PNG_NO_READ_TRANSFORMS + PNG_NO_PROGRESSIVE_READ + PNG_NO_SEQUENTIAL_READ + PNG_NO_WRITE_TRANSFORMS + PNG_NO_READ_ANCILLARY_CHUNKS + PNG_NO_WRITE_ANCILLARY_CHUNKS + +PNG_MAX_UINT was replaced with PNG_UINT_31_MAX. It has been +deprecated since libpng-1.0.16 and libpng-1.2.6. + +The function + png_check_sig(sig, num) +was replaced with + !png_sig_cmp(sig, 0, num) +It has been deprecated since libpng-0.90. + +The function + png_set_gray_1_2_4_to_8() +which also expands tRNS to alpha was replaced with + png_set_expand_gray_1_2_4_to_8() +which does not. It has been deprecated since libpng-1.0.18 and 1.2.9. + +X. Changes to Libpng from version 1.0.x/1.2.x to 1.4.x + +Private libpng prototypes and macro definitions were moved from +png.h and pngconf.h into a new pngpriv.h header file. + +Functions png_set_benign_errors(), png_benign_error(), and +png_chunk_benign_error() were added. + +Support for setting the maximum amount of memory that the application +will allocate for reading chunks was added, as a security measure. +The functions png_set_chunk_cache_max() and png_get_chunk_cache_max() +were added to the library. + +We implemented support for I/O states by adding png_ptr member io_state +and functions png_get_io_chunk_name() and png_get_io_state() in pngget.c + +We added PNG_TRANSFORM_GRAY_TO_RGB to the available high-level +input transforms. + +Checking for and reporting of errors in the IHDR chunk is more thorough. + +Support for global arrays was removed, to improve thread safety. + +Some obsolete/deprecated macros and functions have been removed. + +Typecasted NULL definitions such as + #define png_voidp_NULL (png_voidp)NULL +were eliminated. If you used these in your application, just use +NULL instead. + +The png_struct and info_struct members "trans" and "trans_values" were +changed to "trans_alpha" and "trans_color", respectively. + +The obsolete, unused pnggccrd.c and pngvcrd.c files and related makefiles +were removed. + +The PNG_1_0_X and PNG_1_2_X macros were eliminated. + +The PNG_LEGACY_SUPPORTED macro was eliminated. + +Many WIN32_WCE #ifdefs were removed. + +The functions png_read_init(info_ptr), png_write_init(info_ptr), +png_info_init(info_ptr), png_read_destroy(), and png_write_destroy() +have been removed. They have been deprecated since libpng-0.95. + +The png_permit_empty_plte() was removed. It has been deprecated +since libpng-1.0.9. Use png_permit_mng_features() instead. + +We removed the obsolete stub functions png_get_mmx_flagmask(), +png_set_mmx_thresholds(), png_get_asm_flags(), +png_get_mmx_bitdepth_threshold(), png_get_mmx_rowbytes_threshold(), +png_set_asm_flags(), and png_mmx_supported() + +We removed the obsolete png_check_sig(), png_memcpy_check(), and +png_memset_check() functions. Instead use !png_sig_cmp(), memcpy(), +and memset(), respectively. + +The function png_set_gray_1_2_4_to_8() was removed. It has been +deprecated since libpng-1.0.18 and 1.2.9, when it was replaced with +png_set_expand_gray_1_2_4_to_8() because the former function also +expanded any tRNS chunk to an alpha channel. + +Macros for png_get_uint_16, png_get_uint_32, and png_get_int_32 +were added and are used by default instead of the corresponding +functions. Unfortunately, +from libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the +function) incorrectly returned a value of type png_uint_32. + +We changed the prototype for png_malloc() from + png_malloc(png_structp png_ptr, png_uint_32 size) +to + png_malloc(png_structp png_ptr, png_alloc_size_t size) + +This also applies to the prototype for the user replacement malloc_fn(). + +The png_calloc() function was added and is used in place of +of "png_malloc(); memset();" except in the case in png_read_png() +where the array consists of pointers; in this case a "for" loop is used +after the png_malloc() to set the pointers to NULL, to give robust. +behavior in case the application runs out of memory part-way through +the process. + +We changed the prototypes of png_get_compression_buffer_size() and +png_set_compression_buffer_size() to work with png_size_t instead of +png_uint_32. + +Support for numbered error messages was removed by default, since we +never got around to actually numbering the error messages. The function +png_set_strip_error_numbers() was removed from the library by default. + +The png_zalloc() and png_zfree() functions are no longer exported. +The png_zalloc() function no longer zeroes out the memory that it +allocates. Applications that called png_zalloc(png_ptr, number, size) +can call png_calloc(png_ptr, number*size) instead, and can call +png_free() instead of png_zfree(). + +Support for dithering was disabled by default in libpng-1.4.0, because +it has not been well tested and doesn't actually "dither". +The code was not +removed, however, and could be enabled by building libpng with +PNG_READ_DITHER_SUPPORTED defined. In libpng-1.4.2, this support +was reenabled, but the function was renamed png_set_quantize() to +reflect more accurately what it actually does. At the same time, +the PNG_DITHER_[RED,GREEN_BLUE]_BITS macros were also renamed to +PNG_QUANTIZE_[RED,GREEN,BLUE]_BITS, and PNG_READ_DITHER_SUPPORTED +was renamed to PNG_READ_QUANTIZE_SUPPORTED. + +We removed the trailing '.' from the warning and error messages. + +XI. Changes to Libpng from version 1.4.x to 1.5.x + +From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the +function) incorrectly returned a value of type png_uint_32. + +Checking for invalid palette index on read or write was added at libpng +1.5.10. When an invalid index is found, libpng issues a benign error. +This is enabled by default because this condition is an error according +to the PNG specification, Clause 11.3.2, but the error can be ignored in +each png_ptr with + + png_set_check_for_invalid_index(png_ptr, allowed); + + allowed - one of + 0: disable benign error (accept the + invalid data without warning). + 1: enable benign error (treat the + invalid data as an error or a + warning). + +If the error is ignored, or if png_benign_error() treats it as a warning, +any invalid pixels are decoded as opaque black by the decoder and written +as-is by the encoder. + +Retrieving the maximum palette index found was added at libpng-1.5.15. +This statement must appear after png_read_png() or png_read_image() while +reading, and after png_write_png() or png_write_image() while writing. + + int max_palette = png_get_palette_max(png_ptr, info_ptr); + +This will return the maximum palette index found in the image, or "-1" if +the palette was not checked, or "0" if no palette was found. Note that this +does not account for any palette index used by ancillary chunks such as the +bKGD chunk; you must check those separately to determine the maximum +palette index actually used. + +A. Changes that affect users of libpng + +There are no substantial API changes between the non-deprecated parts of +the 1.4.5 API and the 1.5.0 API; however, the ability to directly access +members of the main libpng control structures, png_struct and png_info, +deprecated in earlier versions of libpng, has been completely removed from +libpng 1.5. + +We no longer include zlib.h in png.h. The include statement has been moved +to pngstruct.h, where it is not accessible by applications. Applications that +need access to information in zlib.h will need to add the '#include "zlib.h"' +directive. It does not matter whether this is placed prior to or after +the '"#include png.h"' directive. + +The png_sprintf(), png_strcpy(), and png_strncpy() macros are no longer used +and were removed. + +We moved the png_strlen(), png_memcpy(), png_memset(), and png_memcmp() +macros into a private header file (pngpriv.h) that is not accessible to +applications. + +In png_get_iCCP, the type of "profile" was changed from png_charpp +to png_bytepp, and in png_set_iCCP, from png_charp to png_const_bytep. + +There are changes of form in png.h, including new and changed macros to +declare parts of the API. Some API functions with arguments that are +pointers to data not modified within the function have been corrected to +declare these arguments with PNG_CONST. + +Much of the internal use of C macros to control the library build has also +changed and some of this is visible in the exported header files, in +particular the use of macros to control data and API elements visible +during application compilation may require significant revision to +application code. (It is extremely rare for an application to do this.) + +Any program that compiled against libpng 1.4 and did not use deprecated +features or access internal library structures should compile and work +against libpng 1.5, except for the change in the prototype for +png_get_iCCP() and png_set_iCCP() API functions mentioned above. + +libpng 1.5.0 adds PNG_ PASS macros to help in the reading and writing of +interlaced images. The macros return the number of rows and columns in +each pass and information that can be used to de-interlace and (if +absolutely necessary) interlace an image. + +libpng 1.5.0 adds an API png_longjmp(png_ptr, value). This API calls +the application-provided png_longjmp_ptr on the internal, but application +initialized, longjmp buffer. It is provided as a convenience to avoid +the need to use the png_jmpbuf macro, which had the unnecessary side +effect of resetting the internal png_longjmp_ptr value. + +libpng 1.5.0 includes a complete fixed point API. By default this is +present along with the corresponding floating point API. In general the +fixed point API is faster and smaller than the floating point one because +the PNG file format used fixed point, not floating point. This applies +even if the library uses floating point in internal calculations. A new +macro, PNG_FLOATING_ARITHMETIC_SUPPORTED, reveals whether the library +uses floating point arithmetic (the default) or fixed point arithmetic +internally for performance critical calculations such as gamma correction. +In some cases, the gamma calculations may produce slightly different +results. This has changed the results in png_rgb_to_gray and in alpha +composition (png_set_background for example). This applies even if the +original image was already linear (gamma == 1.0) and, therefore, it is +not necessary to linearize the image. This is because libpng has *not* +been changed to optimize that case correctly, yet. + +Fixed point support for the sCAL chunk comes with an important caveat; +the sCAL specification uses a decimal encoding of floating point values +and the accuracy of PNG fixed point values is insufficient for +representation of these values. Consequently a "string" API +(png_get_sCAL_s and png_set_sCAL_s) is the only reliable way of reading +arbitrary sCAL chunks in the absence of either the floating point API or +internal floating point calculations. + +Applications no longer need to include the optional distribution header +file pngusr.h or define the corresponding macros during application +build in order to see the correct variant of the libpng API. From 1.5.0 +application code can check for the corresponding _SUPPORTED macro: + +#ifdef PNG_INCH_CONVERSIONS_SUPPORTED + /* code that uses the inch conversion APIs. */ +#endif + +This macro will only be defined if the inch conversion functions have been +compiled into libpng. The full set of macros, and whether or not support +has been compiled in, are available in the header file pnglibconf.h. +This header file is specific to the libpng build. Notice that prior to +1.5.0 the _SUPPORTED macros would always have the default definition unless +reset by pngusr.h or by explicit settings on the compiler command line. +These settings may produce compiler warnings or errors in 1.5.0 because +of macro redefinition. + +From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the +function) incorrectly returned a value of type png_uint_32. libpng 1.5.0 +is consistent with the implementation in 1.4.5 and 1.2.x (where the macro +did not exist.) + +Applications can now choose whether to use these macros or to call the +corresponding function by defining PNG_USE_READ_MACROS or +PNG_NO_USE_READ_MACROS before including png.h. Notice that this is +only supported from 1.5.0 -defining PNG_NO_USE_READ_MACROS prior to 1.5.0 +will lead to a link failure. + +Prior to libpng-1.5.4, the zlib compressor used the same set of parameters +when compressing the IDAT data and textual data such as zTXt and iCCP. +In libpng-1.5.4 we reinitialized the zlib stream for each type of data. +We added five png_set_text_*() functions for setting the parameters to +use with textual data. + +Prior to libpng-1.5.4, the PNG_READ_16_TO_8_ACCURATE_SCALE_SUPPORTED +option was off by default, and slightly inaccurate scaling occurred. +This option can no longer be turned off, and the choice of accurate +or inaccurate 16-to-8 scaling is by using the new png_set_scale_16_to_8() +API for accurate scaling or the old png_set_strip_16_to_8() API for simple +chopping. + +Prior to libpng-1.5.4, the png_set_user_limits() function could only be +used to reduce the width and height limits from the value of +PNG_USER_WIDTH_MAX and PNG_USER_HEIGHT_MAX, although this document said +that it could be used to override them. Now this function will reduce or +increase the limits. + +Starting in libpng-1.5.10, the user limits can be set en masse with the +configuration option PNG_SAFE_LIMITS_SUPPORTED. If this option is enabled, +a set of "safe" limits is applied in pngpriv.h. These can be overridden by +application calls to png_set_user_limits(), png_set_user_chunk_cache_max(), +and/or png_set_user_malloc_max() that increase or decrease the limits. Also, +in libpng-1.5.10 the default width and height limits were increased +from 1,000,000 to 0x7ffffff (i.e., made unlimited). Therefore, the +limits are now + default safe + png_user_width_max 0x7fffffff 1,000,000 + png_user_height_max 0x7fffffff 1,000,000 + png_user_chunk_cache_max 0 (unlimited) 128 + png_user_chunk_malloc_max 0 (unlimited) 8,000,000 + +B. Changes to the build and configuration of libpng + +Details of internal changes to the library code can be found in the CHANGES +file and in the GIT repository logs. These will be of no concern to the vast +majority of library users or builders; however, the few who configure libpng +to a non-default feature set may need to change how this is done. + +There should be no need for library builders to alter build scripts if +these use the distributed build support - configure or the makefiles - +however, users of the makefiles may care to update their build scripts +to build pnglibconf.h where the corresponding makefile does not do so. + +Building libpng with a non-default configuration has changed completely. +The old method using pngusr.h should still work correctly even though the +way pngusr.h is used in the build has been changed; however, library +builders will probably want to examine the changes to take advantage of +new capabilities and to simplify their build system. + +B.1 Specific changes to library configuration capabilities + +The library now supports a complete fixed point implementation and can +thus be used on systems that have no floating point support or very +limited or slow support. Previously gamma correction, an essential part +of complete PNG support, required reasonably fast floating point. + +As part of this the choice of internal implementation has been made +independent of the choice of fixed versus floating point APIs and all the +missing fixed point APIs have been implemented. + +The exact mechanism used to control attributes of API functions has +changed. A single set of operating system independent macro definitions +is used and operating system specific directives are defined in +pnglibconf.h + +As part of this the mechanism used to choose procedure call standards on +those systems that allow a choice has been changed. At present this only +affects certain Microsoft (DOS, Windows) and IBM (OS/2) operating systems +running on Intel processors. As before, PNGAPI is defined where required +to control the exported API functions; however, two new macros, PNGCBAPI +and PNGCAPI, are used instead for callback functions (PNGCBAPI) and +(PNGCAPI) for functions that must match a C library prototype (currently +only png_longjmp_ptr, which must match the C longjmp function.) The new +approach is documented in pngconf.h + +Despite these changes, libpng 1.5.0 only supports the native C function +calling standard on those platforms tested so far (__cdecl on Microsoft +Windows). This is because the support requirements for alternative +calling conventions seem to no longer exist. Developers who find it +necessary to set PNG_API_RULE to 1 should advise the mailing list +(png-mng-implement) of this and library builders who use Openwatcom and +therefore set PNG_API_RULE to 2 should also contact the mailing list. + +A new test program, pngvalid, is provided in addition to pngtest. +pngvalid validates the arithmetic accuracy of the gamma correction +calculations and includes a number of validations of the file format. +A subset of the full range of tests is run when "make check" is done +(in the 'configure' build.) pngvalid also allows total allocated memory +usage to be evaluated and performs additional memory overwrite validation. + +Many changes to individual feature macros have been made. The following +are the changes most likely to be noticed by library builders who +configure libpng: + +1) All feature macros now have consistent naming: + +#define PNG_NO_feature turns the feature off +#define PNG_feature_SUPPORTED turns the feature on + +pnglibconf.h contains one line for each feature macro which is either: + +#define PNG_feature_SUPPORTED + +if the feature is supported or: + +/*#undef PNG_feature_SUPPORTED*/ + +if it is not. Library code consistently checks for the 'SUPPORTED' macro. +It does not, and libpng applications should not, check for the 'NO' macro +which will not normally be defined even if the feature is not supported. +The 'NO' macros are only used internally for setting or not setting the +corresponding 'SUPPORTED' macros. + +Compatibility with the old names is provided as follows: + +PNG_INCH_CONVERSIONS turns on PNG_INCH_CONVERSIONS_SUPPORTED + +And the following definitions disable the corresponding feature: + +PNG_SETJMP_NOT_SUPPORTED disables SETJMP +PNG_READ_TRANSFORMS_NOT_SUPPORTED disables READ_TRANSFORMS +PNG_NO_READ_COMPOSITED_NODIV disables READ_COMPOSITE_NODIV +PNG_WRITE_TRANSFORMS_NOT_SUPPORTED disables WRITE_TRANSFORMS +PNG_READ_ANCILLARY_CHUNKS_NOT_SUPPORTED disables READ_ANCILLARY_CHUNKS +PNG_WRITE_ANCILLARY_CHUNKS_NOT_SUPPORTED disables WRITE_ANCILLARY_CHUNKS + +Library builders should remove use of the above, inconsistent, names. + +2) Warning and error message formatting was previously conditional on +the STDIO feature. The library has been changed to use the +CONSOLE_IO feature instead. This means that if CONSOLE_IO is disabled +the library no longer uses the printf(3) functions, even though the +default read/write implementations use (FILE) style stdio.h functions. + +3) Three feature macros now control the fixed/floating point decisions: + +PNG_FLOATING_POINT_SUPPORTED enables the floating point APIs + +PNG_FIXED_POINT_SUPPORTED enables the fixed point APIs; however, in +practice these are normally required internally anyway (because the PNG +file format is fixed point), therefore in most cases PNG_NO_FIXED_POINT +merely stops the function from being exported. + +PNG_FLOATING_ARITHMETIC_SUPPORTED chooses between the internal floating +point implementation or the fixed point one. Typically the fixed point +implementation is larger and slower than the floating point implementation +on a system that supports floating point; however, it may be faster on a +system which lacks floating point hardware and therefore uses a software +emulation. + +4) Added PNG_{READ,WRITE}_INT_FUNCTIONS_SUPPORTED. This allows the +functions to read and write ints to be disabled independently of +PNG_USE_READ_MACROS, which allows libpng to be built with the functions +even though the default is to use the macros - this allows applications +to choose at app buildtime whether or not to use macros (previously +impossible because the functions weren't in the default build.) + +B.2 Changes to the configuration mechanism + +Prior to libpng-1.5.0 library builders who needed to configure libpng +had either to modify the exported pngconf.h header file to add system +specific configuration or had to write feature selection macros into +pngusr.h and cause this to be included into pngconf.h by defining +PNG_USER_CONFIG. The latter mechanism had the disadvantage that an +application built without PNG_USER_CONFIG defined would see the +unmodified, default, libpng API and thus would probably fail to link. + +These mechanisms still work in the configure build and in any makefile +build that builds pnglibconf.h, although the feature selection macros +have changed somewhat as described above. In 1.5.0, however, pngusr.h is +processed only once, when the exported header file pnglibconf.h is built. +pngconf.h no longer includes pngusr.h, therefore pngusr.h is ignored after the +build of pnglibconf.h and it is never included in an application build. + +The rarely used alternative of adding a list of feature macros to the +CFLAGS setting in the build also still works; however, the macros will be +copied to pnglibconf.h and this may produce macro redefinition warnings +when the individual C files are compiled. + +All configuration now only works if pnglibconf.h is built from +scripts/pnglibconf.dfa. This requires the program awk. Brian Kernighan +(the original author of awk) maintains C source code of that awk and this +and all known later implementations (often called by subtly different +names - nawk and gawk for example) are adequate to build pnglibconf.h. +The Sun Microsystems (now Oracle) program 'awk' is an earlier version +and does not work; this may also apply to other systems that have a +functioning awk called 'nawk'. + +Configuration options are now documented in scripts/pnglibconf.dfa. This +file also includes dependency information that ensures a configuration is +consistent; that is, if a feature is switched off dependent features are +also removed. As a recommended alternative to using feature macros in +pngusr.h a system builder may also define equivalent options in pngusr.dfa +(or, indeed, any file) and add that to the configuration by setting +DFA_XTRA to the file name. The makefiles in contrib/pngminim illustrate +how to do this, and a case where pngusr.h is still required. + +XII. Changes to Libpng from version 1.5.x to 1.6.x + +A "simplified API" has been added (see documentation in png.h and a simple +example in contrib/examples/pngtopng.c). The new publicly visible API +includes the following: + + macros: + PNG_FORMAT_* + PNG_IMAGE_* + structures: + png_control + png_image + read functions + png_image_begin_read_from_file() + png_image_begin_read_from_stdio() + png_image_begin_read_from_memory() + png_image_finish_read() + png_image_free() + write functions + png_image_write_to_file() + png_image_write_to_stdio() + +Starting with libpng-1.6.0, you can configure libpng to prefix all exported +symbols, using the PNG_PREFIX macro. + +We no longer include string.h in png.h. The include statement has been moved +to pngpriv.h, where it is not accessible by applications. Applications that +need access to information in string.h must add an '#include "string.h"' +directive. It does not matter whether this is placed prior to or after +the '"#include png.h"' directive. + +The following API are now DEPRECATED: + png_info_init_3() + png_convert_to_rfc1123() which has been replaced + with png_convert_to_rfc1123_buffer() + png_data_freer() + png_malloc_default() + png_free_default() + png_reset_zstream() + +The following have been removed: + png_get_io_chunk_name(), which has been replaced + with png_get_io_chunk_type(). The new + function returns a 32-bit integer instead of + a string. + The png_sizeof(), png_strlen(), png_memcpy(), png_memcmp(), and + png_memset() macros are no longer used in the libpng sources and + have been removed. These had already been made invisible to applications + (i.e., defined in the private pngpriv.h header file) since libpng-1.5.0. + +The signatures of many exported functions were changed, such that + png_structp became png_structrp or png_const_structrp + png_infop became png_inforp or png_const_inforp +where "rp" indicates a "restricted pointer". + +Error detection in some chunks has improved; in particular the iCCP chunk +reader now does pretty complete validation of the basic format. Some bad +profiles that were previously accepted are now rejected, in particular the +very old broken Microsoft/HP sRGB profile. The PNG spec requirement that +only grayscale profiles may appear in images with color type 0 or 4 and that +even if the image only contains gray pixels, only RGB profiles may appear +in images with color type 2, 3, or 6, is now enforced. The sRGB chunk +is allowed to appear in images with any color type. + +The library now issues an error if the application attempts to set a +transform after it calls png_read_update_info(). + +The library now issues a warning if both background processing and RGB to +gray are used when gamma correction happens. As with previous versions of +the library the results are numerically very incorrect in this case. + +There are some minor arithmetic changes in some transforms such as +png_set_background(), that might be detected by certain regression tests. + +Unknown chunk handling has been improved internally, without any API change. +This adds more correct option control of the unknown handling, corrects +a pre-existing bug where the per-chunk 'keep' setting is ignored, and makes +it possible to skip IDAT chunks in the sequential reader. + +The machine-generated configure files are no longer included in branches +libpng16 and later of the GIT repository. They continue to be included +in the tarball releases, however. + +XIII. Detecting libpng + +The png_get_io_ptr() function has been present since libpng-0.88, has never +changed, and is unaffected by conditional compilation macros. It is the +best choice for use in configure scripts for detecting the presence of any +libpng version since 0.88. In an autoconf "configure.in" you could use + + AC_CHECK_LIB(png, png_get_io_ptr, ... + +XV. Source code repository + +Since about February 2009, version 1.2.34, libpng has been under "git" source +control. The git repository was built from old libpng-x.y.z.tar.gz files +going back to version 0.70. You can access the git repository (read only) +at + + git://git.code.sf.net/p/libpng/code + +or you can browse it with a web browser by selecting the "code" button at + + https://sourceforge.net/projects/libpng + +Patches can be sent to glennrp at users.sourceforge.net or to +png-mng-implement at lists.sourceforge.net or you can upload them to +the libpng bug tracker at + + http://libpng.sourceforge.net + +We also accept patches built from the tar or zip distributions, and +simple verbal discriptions of bug fixes, reported either to the +SourceForge bug tracker, to the png-mng-implement at lists.sf.net +mailing list, or directly to glennrp. + +XV. Coding style + +Our coding style is similar to the "Allman" style, with curly +braces on separate lines: + + if (condition) + { + action; + } + + else if (another condition) + { + another action; + } + +The braces can be omitted from simple one-line actions: + + if (condition) + return (0); + +We use 3-space indentation, except for continued statements which +are usually indented the same as the first line of the statement +plus four more spaces. + +For macro definitions we use 2-space indentation, always leaving the "#" +in the first column. + + #ifndef PNG_NO_FEATURE + # ifndef PNG_FEATURE_SUPPORTED + # define PNG_FEATURE_SUPPORTED + # endif + #endif + +Comments appear with the leading "/*" at the same indentation as +the statement that follows the comment: + + /* Single-line comment */ + statement; + + /* This is a multiple-line + * comment. + */ + statement; + +Very short comments can be placed after the end of the statement +to which they pertain: + + statement; /* comment */ + +We don't use C++ style ("//") comments. We have, however, +used them in the past in some now-abandoned MMX assembler +code. + +Functions and their curly braces are not indented, and +exported functions are marked with PNGAPI: + + /* This is a public function that is visible to + * application programmers. It does thus-and-so. + */ + void PNGAPI + png_exported_function(png_ptr, png_info, foo) + { + body; + } + +The prototypes for all exported functions appear in png.h, +above the comment that says + + /* Maintainer: Put new public prototypes here ... */ + +We mark all non-exported functions with "/* PRIVATE */"": + + void /* PRIVATE */ + png_non_exported_function(png_ptr, png_info, foo) + { + body; + } + +The prototypes for non-exported functions (except for those in +pngtest) appear in +pngpriv.h +above the comment that says + + /* Maintainer: Put new private prototypes here ^ */ + +We put a space after the "sizeof" operator and we omit the +optional parentheses around its argument when the argument +is an expression, not a type name, and we always enclose the +sizeof operator, with its argument, in parentheses: + + (sizeof (png_uint_32)) + (sizeof array) + +Prior to libpng-1.6.0 we used a "png_sizeof()" macro, formatted as +though it were a function. + +To avoid polluting the global namespace, the names of all exported +functions and variables begin with "png_", and all publicly visible C +preprocessor macros begin with "PNG". We request that applications that +use libpng *not* begin any of their own symbols with either of these strings. + +We put a space after each comma and after each semicolon +in "for" statements, and we put spaces before and after each +C binary operator and after "for" or "while", and before +"?". We don't put a space between a typecast and the expression +being cast, nor do we put one between a function name and the +left parenthesis that follows it: + + for (i = 2; i > 0; --i) + y[i] = a(x) + (int)b; + +We prefer #ifdef and #ifndef to #if defined() and #if !defined() +when there is only one macro being tested. We always use parentheses +with "defined". + +We prefer to express integers that are used as bit masks in hex format, +with an even number of lower-case hex digits (e.g., 0x00, 0xff, 0x0100). + +We prefer to use underscores in variable names rather than camelCase, except +for a few type names that we inherit from zlib.h. + +We do not use the TAB character for indentation in the C sources. + +Lines do not exceed 80 characters. + +Other rules can be inferred by inspecting the libpng source. + +XVI. Y2K Compliance in libpng + +April 25, 2013 + +Since the PNG Development group is an ad-hoc body, we can't make +an official declaration. + +This is your unofficial assurance that libpng from version 0.71 and +upward through 1.6.2 are Y2K compliant. It is my belief that earlier +versions were also Y2K compliant. + +Libpng only has two year fields. One is a 2-byte unsigned integer +that will hold years up to 65535. The other, which is deprecated, +holds the date in text format, and will hold years up to 9999. + +The integer is + "png_uint_16 year" in png_time_struct. + +The string is + "char time_buffer[29]" in png_struct. This is no longer used +in libpng-1.6.x and will be removed from libpng-1.7.0. + +There are seven time-related functions: + + png_convert_to_rfc_1123() in png.c + (formerly png_convert_to_rfc_1152() in error) + png_convert_from_struct_tm() in pngwrite.c, called + in pngwrite.c + png_convert_from_time_t() in pngwrite.c + png_get_tIME() in pngget.c + png_handle_tIME() in pngrutil.c, called in pngread.c + png_set_tIME() in pngset.c + png_write_tIME() in pngwutil.c, called in pngwrite.c + +All appear to handle dates properly in a Y2K environment. The +png_convert_from_time_t() function calls gmtime() to convert from system +clock time, which returns (year - 1900), which we properly convert to +the full 4-digit year. There is a possibility that applications using +libpng are not passing 4-digit years into the png_convert_to_rfc_1123() +function, or that they are incorrectly passing only a 2-digit year +instead of "year - 1900" into the png_convert_from_struct_tm() function, +but this is not under our control. The libpng documentation has always +stated that it works with 4-digit years, and the APIs have been +documented as such. + +The tIME chunk itself is also Y2K compliant. It uses a 2-byte unsigned +integer to hold the year, and can hold years as large as 65535. + +zlib, upon which libpng depends, is also Y2K compliant. It contains +no date-related code. + + + Glenn Randers-Pehrson + libpng maintainer + PNG Development Group diff --git a/src/SDL2/external/libpng-1.6.2/libpng.3 b/src/SDL2/external/libpng-1.6.2/libpng.3 new file mode 100644 index 000000000..bbf2eaaa8 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/libpng.3 @@ -0,0 +1,6074 @@ +.TH LIBPNG 3 "April 25, 2013" +.SH NAME +libpng \- Portable Network Graphics (PNG) Reference Library 1.6.2 +.SH SYNOPSIS +\fB +#include \fP + +\fBpng_uint_32 png_access_version_number \fI(void\fP\fB);\fP + +\fBvoid png_benign_error (png_structp \fP\fIpng_ptr\fP\fB, png_const_charp \fIerror\fP\fB);\fP + +\fBvoid png_build_grayscale_palette (int \fP\fIbit_depth\fP\fB, png_colorp \fIpalette\fP\fB);\fP + +\fBpng_voidp png_calloc (png_structp \fP\fIpng_ptr\fP\fB, png_alloc_size_t \fIsize\fP\fB);\fP + +\fBvoid png_chunk_benign_error (png_structp \fP\fIpng_ptr\fP\fB, png_const_charp \fIerror\fP\fB);\fP + +\fBvoid png_chunk_error (png_structp \fP\fIpng_ptr\fP\fB, png_const_charp \fIerror\fP\fB);\fP + +\fBvoid png_chunk_warning (png_structp \fP\fIpng_ptr\fP\fB, png_const_charp \fImessage\fP\fB);\fP + +\fBvoid png_convert_from_struct_tm (png_timep \fP\fIptime\fP\fB, struct tm FAR * \fIttime\fP\fB);\fP + +\fBvoid png_convert_from_time_t (png_timep \fP\fIptime\fP\fB, time_t \fIttime\fP\fB);\fP + +\fBpng_charp png_convert_to_rfc1123 (png_structp \fP\fIpng_ptr\fP\fB, png_timep \fIptime\fP\fB);\fP + +\fBpng_infop png_create_info_struct (png_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_structp png_create_read_struct (png_const_charp \fP\fIuser_png_ver\fP\fB, png_voidp \fP\fIerror_ptr\fP\fB, png_error_ptr \fP\fIerror_fn\fP\fB, png_error_ptr \fIwarn_fn\fP\fB);\fP + +\fBpng_structp png_create_read_struct_2 (png_const_charp \fP\fIuser_png_ver\fP\fB, png_voidp \fP\fIerror_ptr\fP\fB, png_error_ptr \fP\fIerror_fn\fP\fB, png_error_ptr \fP\fIwarn_fn\fP\fB, png_voidp \fP\fImem_ptr\fP\fB, png_malloc_ptr \fP\fImalloc_fn\fP\fB, png_free_ptr \fIfree_fn\fP\fB);\fP + +\fBpng_structp png_create_write_struct (png_const_charp \fP\fIuser_png_ver\fP\fB, png_voidp \fP\fIerror_ptr\fP\fB, png_error_ptr \fP\fIerror_fn\fP\fB, png_error_ptr \fIwarn_fn\fP\fB);\fP + +\fBpng_structp png_create_write_struct_2 (png_const_charp \fP\fIuser_png_ver\fP\fB, png_voidp \fP\fIerror_ptr\fP\fB, png_error_ptr \fP\fIerror_fn\fP\fB, png_error_ptr \fP\fIwarn_fn\fP\fB, png_voidp \fP\fImem_ptr\fP\fB, png_malloc_ptr \fP\fImalloc_fn\fP\fB, png_free_ptr \fIfree_fn\fP\fB);\fP + +\fBvoid png_data_freer (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, int \fP\fIfreer\fP\fB, png_uint_32 \fImask)\fP\fB);\fP + +\fBvoid png_destroy_info_struct (png_structp \fP\fIpng_ptr\fP\fB, png_infopp \fIinfo_ptr_ptr\fP\fB);\fP + +\fBvoid png_destroy_read_struct (png_structpp \fP\fIpng_ptr_ptr\fP\fB, png_infopp \fP\fIinfo_ptr_ptr\fP\fB, png_infopp \fIend_info_ptr_ptr\fP\fB);\fP + +\fBvoid png_destroy_write_struct (png_structpp \fP\fIpng_ptr_ptr\fP\fB, png_infopp \fIinfo_ptr_ptr\fP\fB);\fP + +\fBvoid png_err (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_error (png_structp \fP\fIpng_ptr\fP\fB, png_const_charp \fIerror\fP\fB);\fP + +\fBvoid png_free (png_structp \fP\fIpng_ptr\fP\fB, png_voidp \fIptr\fP\fB);\fP + +\fBvoid png_free_chunk_list (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_free_default (png_structp \fP\fIpng_ptr\fP\fB, png_voidp \fIptr\fP\fB);\fP + +\fBvoid png_free_data (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, int \fInum\fP\fB);\fP + +\fBpng_byte png_get_bit_depth (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_bKGD (png_const_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_color_16p \fI*background\fP\fB);\fP + +\fBpng_byte png_get_channels (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_cHRM (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, double \fP\fI*white_x\fP\fB, double \fP\fI*white_y\fP\fB, double \fP\fI*red_x\fP\fB, double \fP\fI*red_y\fP\fB, double \fP\fI*green_x\fP\fB, double \fP\fI*green_y\fP\fB, double \fP\fI*blue_x\fP\fB, double \fI*blue_y\fP\fB);\fP + +\fBpng_uint_32 png_get_cHRM_fixed (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fP\fI*white_x\fP\fB, png_uint_32 \fP\fI*white_y\fP\fB, png_uint_32 \fP\fI*red_x\fP\fB, png_uint_32 \fP\fI*red_y\fP\fB, png_uint_32 \fP\fI*green_x\fP\fB, png_uint_32 \fP\fI*green_y\fP\fB, png_uint_32 \fP\fI*blue_x\fP\fB, png_uint_32 \fI*blue_y\fP\fB);\fP + +\fBpng_uint_32 png_get_cHRM_XYZ (png_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, double \fP\fI*red_X\fP\fB, double \fP\fI*red_Y\fP\fB, double \fP\fI*red_Z\fP\fB, double \fP\fI*green_X\fP\fB, double \fP\fI*green_Y\fP\fB, double \fP\fI*green_Z\fP\fB, double \fP\fI*blue_X\fP\fB, double \fP\fI*blue_Y\fP\fB, double \fI*blue_Z\fP\fB);\fP + +\fBpng_uint_32 png_get_cHRM_XYZ_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_fixed_point \fP\fI*int_red_X\fP\fB, png_fixed_point \fP\fI*int_red_Y\fP\fB, png_fixed_point \fP\fI*int_red_Z\fP\fB, png_fixed_point \fP\fI*int_green_X\fP\fB, png_fixed_point \fP\fI*int_green_Y\fP\fB, png_fixed_point \fP\fI*int_green_Z\fP\fB, png_fixed_point \fP\fI*int_blue_X\fP\fB, png_fixed_point \fP\fI*int_blue_Y\fP\fB, png_fixed_point \fI*int_blue_Z\fP\fB);\fP + +\fBpng_uint_32 png_get_chunk_cache_max (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_alloc_size_t png_get_chunk_malloc_max (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_byte png_get_color_type (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_compression_buffer_size (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_byte png_get_compression_type (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_byte png_get_copyright (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_current_row_number \fI(png_const_structp\fP\fB);\fP + +\fBpng_byte png_get_current_pass_number \fI(png_const_structp\fP\fB);\fP + +\fBpng_voidp png_get_error_ptr (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_byte png_get_filter_type (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_gAMA (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, double \fI*file_gamma\fP\fB);\fP + +\fBpng_uint_32 png_get_gAMA_fixed (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fI*int_file_gamma\fP\fB);\fP + +\fBpng_byte png_get_header_ver (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_byte png_get_header_version (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_hIST (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_uint_16p \fI*hist\fP\fB);\fP + +\fBpng_uint_32 png_get_iCCP (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_charpp \fP\fIname\fP\fB, int \fP\fI*compression_type\fP\fB, png_bytepp \fP\fIprofile\fP\fB, png_uint_32 \fI*proflen\fP\fB);\fP + +\fBpng_uint_32 png_get_IHDR (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fP\fI*width\fP\fB, png_uint_32 \fP\fI*height\fP\fB, int \fP\fI*bit_depth\fP\fB, int \fP\fI*color_type\fP\fB, int \fP\fI*interlace_type\fP\fB, int \fP\fI*compression_type\fP\fB, int \fI*filter_type\fP\fB);\fP + +\fBpng_uint_32 png_get_image_height (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_image_width (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_int_32 png_get_int_32 (png_bytep \fIbuf\fP\fB);\fP + +\fBpng_byte png_get_interlace_type (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_io_chunk_type (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_voidp png_get_io_ptr (png_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_io_state (png_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_byte png_get_libpng_ver (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_voidp png_get_mem_ptr (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_oFFs (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fP\fI*offset_x\fP\fB, png_uint_32 \fP\fI*offset_y\fP\fB, int \fI*unit_type\fP\fB);\fP + +\fBpng_uint_32 png_get_pCAL (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_charp \fP\fI*purpose\fP\fB, png_int_32 \fP\fI*X0\fP\fB, png_int_32 \fP\fI*X1\fP\fB, int \fP\fI*type\fP\fB, int \fP\fI*nparams\fP\fB, png_charp \fP\fI*units\fP\fB, png_charpp \fI*params\fP\fB);\fP + +\fBpng_uint_32 png_get_pHYs (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fP\fI*res_x\fP\fB, png_uint_32 \fP\fI*res_y\fP\fB, int \fI*unit_type\fP\fB);\fP + +\fBfloat png_get_pixel_aspect_ratio (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_pHYs_dpi (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fP\fI*res_x\fP\fB, png_uint_32 \fP\fI*res_y\fP\fB, int \fI*unit_type\fP\fB);\fP + +\fBpng_fixed_point png_get_pixel_aspect_ratio_fixed (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_pixels_per_inch (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_pixels_per_meter (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_voidp png_get_progressive_ptr (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_PLTE (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_colorp \fP\fI*palette\fP\fB, int \fI*num_palette\fP\fB);\fP + +\fBpng_byte png_get_rgb_to_gray_status (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_rowbytes (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_bytepp png_get_rows (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_sBIT (png_const_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_color_8p \fI*sig_bit\fP\fB);\fP + +\fBvoid png_get_sCAL (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, int* \fP\fIunit\fP\fB, double* \fP\fIwidth\fP\fB, double* \fIheight\fP\fB);\fP + +\fBvoid png_get_sCAL_fixed (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, int* \fP\fIunit\fP\fB, png_fixed_pointp \fP\fIwidth\fP\fB, png_fixed_pointp \fIheight\fP\fB);\fP + +\fBvoid png_get_sCAL_s (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, int* \fP\fIunit\fP\fB, png_charpp \fP\fIwidth\fP\fB, png_charpp \fIheight\fP\fB);\fP + +\fBpng_bytep png_get_signature (png_const_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_sPLT (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_spalette_p \fI*splt_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_sRGB (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, int \fI*file_srgb_intent\fP\fB);\fP + +\fBpng_uint_32 png_get_text (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_textp \fP\fI*text_ptr\fP\fB, int \fI*num_text\fP\fB);\fP + +\fBpng_uint_32 png_get_tIME (png_const_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_timep \fI*mod_time\fP\fB);\fP + +\fBpng_uint_32 png_get_tRNS (png_const_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_bytep \fP\fI*trans_alpha\fP\fB, int \fP\fI*num_trans\fP\fB, png_color_16p \fI*trans_color\fP\fB);\fP + +\fB/* This function is really an inline macro. \fI*/ + +\fBpng_uint_16 png_get_uint_16 (png_bytep \fIbuf\fP\fB);\fP + +\fBpng_uint_32 png_get_uint_31 (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fIbuf\fP\fB);\fP + +\fB/* This function is really an inline macro. \fI*/ + +\fBpng_uint_32 png_get_uint_32 (png_bytep \fIbuf\fP\fB);\fP + +\fBpng_uint_32 png_get_unknown_chunks (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_unknown_chunkpp \fIunknowns\fP\fB);\fP + +\fBpng_voidp png_get_user_chunk_ptr (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_user_height_max (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_voidp png_get_user_transform_ptr (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_user_width_max (png_const_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_valid (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIflag\fP\fB);\fP + +\fBfloat png_get_x_offset_inches (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_fixed_point png_get_x_offset_inches_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_int_32 png_get_x_offset_microns (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_int_32 png_get_x_offset_pixels (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_x_pixels_per_inch (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_x_pixels_per_meter (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBfloat png_get_y_offset_inches (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_fixed_point png_get_y_offset_inches_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_int_32 png_get_y_offset_microns (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_int_32 png_get_y_offset_pixels (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_y_pixels_per_inch (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBpng_uint_32 png_get_y_pixels_per_meter (png_const_structp \fP\fIpng_ptr\fP\fB, png_const_infop \fIinfo_ptr\fP\fB);\fP + +\fBint png_handle_as_unknown (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fIchunk_name\fP\fB);\fP + +\fBint png_image_begin_read_from_file (png_imagep \fP\fIimage\fP\fB, const char \fI*file_name\fP\fB);\fP + +\fBint png_image_begin_read_from_stdio (png_imagep \fP\fIimage\fP\fB, FILE* \fIfile\fP\fB);\fP + +\fBint, png_image_begin_read_from_memory (png_imagep \fP\fIimage\fP\fB, png_const_voidp \fP\fImemory\fP\fB, png_size_t \fIsize\fP\fB);\fP + +\fBint png_image_finish_read (png_imagep \fP\fIimage\fP\fB, png_colorp \fP\fIbackground\fP\fB, void \fP\fI*buffer\fP\fB, png_int_32 \fP\fIrow_stride\fP\fB, void \fI*colormap\fP\fB);\fP + +\fBvoid png_image_free (png_imagep \fIimage\fP\fB);\fP + +\fBint png_image_write_to_file (png_imagep \fP\fIimage\fP\fB, const char \fP\fI*file\fP\fB, int \fP\fIconvert_to_8bit\fP\fB, const void \fP\fI*buffer\fP\fB, png_int_32 \fP\fIrow_stride\fP\fB, void \fI*colormap\fP\fB);\fP + +\fBint png_image_write_to_stdio (png_imagep \fP\fIimage\fP\fB, FILE \fP\fI*file\fP\fB, int \fP\fIconvert_to_8_bit\fP\fB, const void \fP\fI*buffer\fP\fB, png_int_32 \fP\fIrow_stride\fP\fB, void \fI*colormap)\fP\fB);\fP + +\fBvoid png_info_init_3 (png_infopp \fP\fIinfo_ptr\fP\fB, png_size_t \fIpng_info_struct_size\fP\fB);\fP + +\fBvoid png_init_io (png_structp \fP\fIpng_ptr\fP\fB, FILE \fI*fp\fP\fB);\fP + +\fBvoid png_longjmp (png_structp \fP\fIpng_ptr\fP\fB, int \fIval\fP\fB);\fP + +\fBpng_voidp png_malloc (png_structp \fP\fIpng_ptr\fP\fB, png_alloc_size_t \fIsize\fP\fB);\fP + +\fBpng_voidp png_malloc_default (png_structp \fP\fIpng_ptr\fP\fB, png_alloc_size_t \fIsize\fP\fB);\fP + +\fBpng_voidp png_malloc_warn (png_structp \fP\fIpng_ptr\fP\fB, png_alloc_size_t \fIsize\fP\fB);\fP + +\fBpng_uint_32 png_permit_mng_features (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fImng_features_permitted\fP\fB);\fP + +\fBvoid png_process_data (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_bytep \fP\fIbuffer\fP\fB, png_size_t \fIbuffer_size\fP\fB);\fP + +\fBpng_size_t png_process_data_pause \fP\fI(png_structp\fP\fB, int \fIsave\fP\fB);\fP + +\fBpng_uint_32 png_process_data_skip \fI(png_structp\fP\fB);\fP + +\fBvoid png_progressive_combine_row (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIold_row\fP\fB, png_bytep \fInew_row\fP\fB);\fP + +\fBvoid png_read_end (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP + +\fBvoid png_read_image (png_structp \fP\fIpng_ptr\fP\fB, png_bytepp \fIimage\fP\fB);\fP + +\fBvoid png_read_info (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP + +\fBvoid png_read_png (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, int \fP\fItransforms\fP\fB, png_voidp \fIparams\fP\fB);\fP + +\fBvoid png_read_row (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIrow\fP\fB, png_bytep \fIdisplay_row\fP\fB);\fP + +\fBvoid png_read_rows (png_structp \fP\fIpng_ptr\fP\fB, png_bytepp \fP\fIrow\fP\fB, png_bytepp \fP\fIdisplay_row\fP\fB, png_uint_32 \fInum_rows\fP\fB);\fP + +\fBvoid png_read_update_info (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP + +\fBint png_reset_zstream (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_save_int_32 (png_bytep \fP\fIbuf\fP\fB, png_int_32 \fIi\fP\fB);\fP + +\fBvoid png_save_uint_16 (png_bytep \fP\fIbuf\fP\fB, unsigned int \fIi\fP\fB);\fP + +\fBvoid png_save_uint_32 (png_bytep \fP\fIbuf\fP\fB, png_uint_32 \fIi\fP\fB);\fP + +\fBvoid png_set_add_alpha (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fP\fIfiller\fP\fB, int \fIflags\fP\fB);\fP + +\fBvoid png_set_alpha_mode (png_structp \fP\fIpng_ptr\fP\fB, int \fP\fImode\fP\fB, double \fIoutput_gamma\fP\fB);\fP + +\fBvoid png_set_alpha_mode_fixed (png_structp \fP\fIpng_ptr\fP\fB, int \fP\fImode\fP\fB, png_fixed_point \fIoutput_gamma\fP\fB);\fP + +\fBvoid png_set_background (png_structp \fP\fIpng_ptr\fP\fB, png_color_16p \fP\fIbackground_color\fP\fB, int \fP\fIbackground_gamma_code\fP\fB, int \fP\fIneed_expand\fP\fB, double \fIbackground_gamma\fP\fB);\fP + +\fBvoid png_set_background_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_color_16p \fP\fIbackground_color\fP\fB, int \fP\fIbackground_gamma_code\fP\fB, int \fP\fIneed_expand\fP\fB, png_uint_32 \fIbackground_gamma\fP\fB);\fP + +\fBvoid png_set_benign_errors (png_structp \fP\fIpng_ptr\fP\fB, int \fIallowed\fP\fB);\fP + +\fBvoid png_set_bgr (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_bKGD (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_color_16p \fIbackground\fP\fB);\fP + +\fBvoid png_set_check_for_invalid_index(png_structrp \fP\fIpng_ptr\fP\fB, int \fIallowed\fP\fB);\fP + +\fBvoid png_set_cHRM (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, double \fP\fIwhite_x\fP\fB, double \fP\fIwhite_y\fP\fB, double \fP\fIred_x\fP\fB, double \fP\fIred_y\fP\fB, double \fP\fIgreen_x\fP\fB, double \fP\fIgreen_y\fP\fB, double \fP\fIblue_x\fP\fB, double \fIblue_y\fP\fB);\fP + +\fBvoid png_set_cHRM_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fP\fIwhite_x\fP\fB, png_uint_32 \fP\fIwhite_y\fP\fB, png_uint_32 \fP\fIred_x\fP\fB, png_uint_32 \fP\fIred_y\fP\fB, png_uint_32 \fP\fIgreen_x\fP\fB, png_uint_32 \fP\fIgreen_y\fP\fB, png_uint_32 \fP\fIblue_x\fP\fB, png_uint_32 \fIblue_y\fP\fB);\fP + +\fBvoid png_set_cHRM_XYZ (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, double \fP\fIred_X\fP\fB, double \fP\fIred_Y\fP\fB, double \fP\fIred_Z\fP\fB, double \fP\fIgreen_X\fP\fB, double \fP\fIgreen_Y\fP\fB, double \fP\fIgreen_Z\fP\fB, double \fP\fIblue_X\fP\fB, double \fP\fIblue_Y\fP\fB, double \fIblue_Z\fP\fB);\fP + +\fBvoid png_set_cHRM_XYZ_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_fixed_point \fP\fIint_red_X\fP\fB, png_fixed_point \fP\fIint_red_Y\fP\fB, png_fixed_point \fP\fIint_red_Z\fP\fB, png_fixed_point \fP\fIint_green_X\fP\fB, png_fixed_point \fP\fIint_green_Y\fP\fB, png_fixed_point \fP\fIint_green_Z\fP\fB, png_fixed_point \fP\fIint_blue_X\fP\fB, png_fixed_point \fP\fIint_blue_Y\fP\fB, png_fixed_point \fIint_blue_Z\fP\fB);\fP + +\fBvoid png_set_chunk_cache_max (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fIuser_chunk_cache_max\fP\fB);\fP + +\fBvoid png_set_compression_level (png_structp \fP\fIpng_ptr\fP\fB, int \fIlevel\fP\fB);\fP + +\fBvoid png_set_compression_mem_level (png_structp \fP\fIpng_ptr\fP\fB, int \fImem_level\fP\fB);\fP + +\fBvoid png_set_compression_method (png_structp \fP\fIpng_ptr\fP\fB, int \fImethod\fP\fB);\fP + +\fBvoid png_set_compression_strategy (png_structp \fP\fIpng_ptr\fP\fB, int \fIstrategy\fP\fB);\fP + +\fBvoid png_set_compression_window_bits (png_structp \fP\fIpng_ptr\fP\fB, int \fIwindow_bits\fP\fB);\fP + +\fBvoid png_set_crc_action (png_structp \fP\fIpng_ptr\fP\fB, int \fP\fIcrit_action\fP\fB, int \fIancil_action\fP\fB);\fP + +\fBvoid png_set_error_fn (png_structp \fP\fIpng_ptr\fP\fB, png_voidp \fP\fIerror_ptr\fP\fB, png_error_ptr \fP\fIerror_fn\fP\fB, png_error_ptr \fIwarning_fn\fP\fB);\fP + +\fBvoid png_set_expand (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_expand_16 (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_expand_gray_1_2_4_to_8 (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_filler (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fP\fIfiller\fP\fB, int \fIflags\fP\fB);\fP + +\fBvoid png_set_filter (png_structp \fP\fIpng_ptr\fP\fB, int \fP\fImethod\fP\fB, int \fIfilters\fP\fB);\fP + +\fBvoid png_set_filter_heuristics (png_structp \fP\fIpng_ptr\fP\fB, int \fP\fIheuristic_method\fP\fB, int \fP\fInum_weights\fP\fB, png_doublep \fP\fIfilter_weights\fP\fB, png_doublep \fIfilter_costs\fP\fB);\fP + +\fBvoid png_set_filter_heuristics_fixed (png_structp \fP\fIpng_ptr\fP\fB, int \fP\fIheuristic_method\fP\fB, int \fP\fInum_weights\fP\fB, png_fixed_point_p \fP\fIfilter_weights\fP\fB, png_fixed_point_p \fIfilter_costs\fP\fB);\fP + +\fBvoid png_set_flush (png_structp \fP\fIpng_ptr\fP\fB, int \fInrows\fP\fB);\fP + +\fBvoid png_set_gamma (png_structp \fP\fIpng_ptr\fP\fB, double \fP\fIscreen_gamma\fP\fB, double \fIdefault_file_gamma\fP\fB);\fP + +\fBvoid png_set_gamma_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fP\fIscreen_gamma\fP\fB, png_uint_32 \fIdefault_file_gamma\fP\fB);\fP + +\fBvoid png_set_gAMA (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, double \fIfile_gamma\fP\fB);\fP + +\fBvoid png_set_gAMA_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIfile_gamma\fP\fB);\fP + +\fBvoid png_set_gray_1_2_4_to_8 (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_gray_to_rgb (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_hIST (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_16p \fIhist\fP\fB);\fP + +\fBvoid png_set_iCCP (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_const_charp \fP\fIname\fP\fB, int \fP\fIcompression_type\fP\fB, png_const_bytep \fP\fIprofile\fP\fB, png_uint_32 \fIproflen\fP\fB);\fP + +\fBint png_set_interlace_handling (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_invalid (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, int \fImask\fP\fB);\fP + +\fBvoid png_set_invert_alpha (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_invert_mono (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_IHDR (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fP\fIwidth\fP\fB, png_uint_32 \fP\fIheight\fP\fB, int \fP\fIbit_depth\fP\fB, int \fP\fIcolor_type\fP\fB, int \fP\fIinterlace_type\fP\fB, int \fP\fIcompression_type\fP\fB, int \fIfilter_type\fP\fB);\fP + +\fBvoid png_set_keep_unknown_chunks (png_structp \fP\fIpng_ptr\fP\fB, int \fP\fIkeep\fP\fB, png_bytep \fP\fIchunk_list\fP\fB, int \fInum_chunks\fP\fB);\fP + +\fBjmp_buf* png_set_longjmp_fn (png_structp \fP\fIpng_ptr\fP\fB, png_longjmp_ptr \fP\fIlongjmp_fn\fP\fB, size_t \fIjmp_buf_size\fP\fB);\fP + +\fBvoid png_set_chunk_malloc_max (png_structp \fP\fIpng_ptr\fP\fB, png_alloc_size_t \fIuser_chunk_cache_max\fP\fB);\fP + +\fBvoid png_set_compression_buffer_size (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fIsize\fP\fB);\fP + +\fBvoid png_set_mem_fn (png_structp \fP\fIpng_ptr\fP\fB, png_voidp \fP\fImem_ptr\fP\fB, png_malloc_ptr \fP\fImalloc_fn\fP\fB, png_free_ptr \fIfree_fn\fP\fB);\fP + +\fBvoid png_set_oFFs (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fP\fIoffset_x\fP\fB, png_uint_32 \fP\fIoffset_y\fP\fB, int \fIunit_type\fP\fB);\fP + +\fBvoid png_set_packing (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_packswap (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_palette_to_rgb (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_pCAL (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_charp \fP\fIpurpose\fP\fB, png_int_32 \fP\fIX0\fP\fB, png_int_32 \fP\fIX1\fP\fB, int \fP\fItype\fP\fB, int \fP\fInparams\fP\fB, png_charp \fP\fIunits\fP\fB, png_charpp \fIparams\fP\fB);\fP + +\fBvoid png_set_pHYs (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fP\fIres_x\fP\fB, png_uint_32 \fP\fIres_y\fP\fB, int \fIunit_type\fP\fB);\fP + +\fBvoid png_set_progressive_read_fn (png_structp \fP\fIpng_ptr\fP\fB, png_voidp \fP\fIprogressive_ptr\fP\fB, png_progressive_info_ptr \fP\fIinfo_fn\fP\fB, png_progressive_row_ptr \fP\fIrow_fn\fP\fB, png_progressive_end_ptr \fIend_fn\fP\fB);\fP + +\fBvoid png_set_PLTE (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_colorp \fP\fIpalette\fP\fB, int \fInum_palette\fP\fB);\fP + +\fBvoid png_set_quantize (png_structp \fP\fIpng_ptr\fP\fB, png_colorp \fP\fIpalette\fP\fB, int \fP\fInum_palette\fP\fB, int \fP\fImaximum_colors\fP\fB, png_uint_16p \fP\fIhistogram\fP\fB, int \fIfull_quantize\fP\fB);\fP + +\fBvoid png_set_read_fn (png_structp \fP\fIpng_ptr\fP\fB, png_voidp \fP\fIio_ptr\fP\fB, png_rw_ptr \fIread_data_fn\fP\fB);\fP + +\fBvoid png_set_read_status_fn (png_structp \fP\fIpng_ptr\fP\fB, png_read_status_ptr \fIread_row_fn\fP\fB);\fP + +\fBvoid png_set_read_user_chunk_fn (png_structp \fP\fIpng_ptr\fP\fB, png_voidp \fP\fIuser_chunk_ptr\fP\fB, png_user_chunk_ptr \fIread_user_chunk_fn\fP\fB);\fP + +\fBvoid png_set_read_user_transform_fn (png_structp \fP\fIpng_ptr\fP\fB, png_user_transform_ptr \fIread_user_transform_fn\fP\fB);\fP + +\fBvoid png_set_rgb_to_gray (png_structp \fP\fIpng_ptr\fP\fB, int \fP\fIerror_action\fP\fB, double \fP\fIred\fP\fB, double \fIgreen\fP\fB);\fP + +\fBvoid png_set_rgb_to_gray_fixed (png_structp \fP\fIpng_ptr\fP\fB, int error_action png_uint_32 \fP\fIred\fP\fB, png_uint_32 \fIgreen\fP\fB);\fP + +\fBvoid png_set_rows (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_bytepp \fIrow_pointers\fP\fB);\fP + +\fBvoid png_set_sBIT (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_color_8p \fIsig_bit\fP\fB);\fP + +\fBvoid png_set_sCAL (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, int \fP\fIunit\fP\fB, double \fP\fIwidth\fP\fB, double \fIheight\fP\fB);\fP + +\fBvoid png_set_sCAL_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, int \fP\fIunit\fP\fB, png_fixed_point \fP\fIwidth\fP\fB, png_fixed_point \fIheight\fP\fB);\fP + +\fBvoid png_set_sCAL_s (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, int \fP\fIunit\fP\fB, png_charp \fP\fIwidth\fP\fB, png_charp \fIheight\fP\fB);\fP + +\fBvoid png_set_scale_16 (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_shift (png_structp \fP\fIpng_ptr\fP\fB, png_color_8p \fItrue_bits\fP\fB);\fP + +\fBvoid png_set_sig_bytes (png_structp \fP\fIpng_ptr\fP\fB, int \fInum_bytes\fP\fB);\fP + +\fBvoid png_set_sPLT (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_spalette_p \fP\fIsplt_ptr\fP\fB, int \fInum_spalettes\fP\fB);\fP + +\fBvoid png_set_sRGB (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, int \fIsrgb_intent\fP\fB);\fP + +\fBvoid png_set_sRGB_gAMA_and_cHRM (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, int \fIsrgb_intent\fP\fB);\fP + +\fBvoid png_set_strip_16 (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_strip_alpha (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_strip_error_numbers (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fIstrip_mode\fP\fB);\fP + +\fBvoid png_set_swap (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_swap_alpha (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_set_text (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_textp \fP\fItext_ptr\fP\fB, int \fInum_text\fP\fB);\fP + +\fBvoid png_set_text_compression_level (png_structp \fP\fIpng_ptr\fP\fB, int \fIlevel\fP\fB);\fP + +\fBvoid png_set_text_compression_mem_level (png_structp \fP\fIpng_ptr\fP\fB, int \fImem_level\fP\fB);\fP + +\fBvoid png_set_text_compression_strategy (png_structp \fP\fIpng_ptr\fP\fB, int \fIstrategy\fP\fB);\fP + +\fBvoid png_set_text_compression_window_bits (png_structp \fP\fIpng_ptr\fP\fB, int \fIwindow_bits\fP\fB);\fP + +\fBvoid \fP\fIpng_set_text_compression_method\fP\fB, (png_structp \fP\fIpng_ptr\fP\fB, int \fImethod)\fP\fB);\fP + +\fBvoid png_set_tIME (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_timep \fImod_time\fP\fB);\fP + +\fBvoid png_set_tRNS (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_bytep \fP\fItrans_alpha\fP\fB, int \fP\fInum_trans\fP\fB, png_color_16p \fItrans_color\fP\fB);\fP + +\fBvoid png_set_tRNS_to_alpha (png_structp \fIpng_ptr\fP\fB);\fP + +\fBpng_uint_32 png_set_unknown_chunks (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_unknown_chunkp \fP\fIunknowns\fP\fB, int \fP\fInum\fP\fB, int \fIlocation\fP\fB);\fP + +\fBvoid png_set_unknown_chunk_location (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, int \fP\fIchunk\fP\fB, int \fIlocation\fP\fB);\fP + +\fBvoid png_set_user_limits (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fP\fIuser_width_max\fP\fB, png_uint_32 \fIuser_height_max\fP\fB);\fP + +\fBvoid png_set_user_transform_info (png_structp \fP\fIpng_ptr\fP\fB, png_voidp \fP\fIuser_transform_ptr\fP\fB, int \fP\fIuser_transform_depth\fP\fB, int \fIuser_transform_channels\fP\fB);\fP + +\fBvoid png_set_write_fn (png_structp \fP\fIpng_ptr\fP\fB, png_voidp \fP\fIio_ptr\fP\fB, png_rw_ptr \fP\fIwrite_data_fn\fP\fB, png_flush_ptr \fIoutput_flush_fn\fP\fB);\fP + +\fBvoid png_set_write_status_fn (png_structp \fP\fIpng_ptr\fP\fB, png_write_status_ptr \fIwrite_row_fn\fP\fB);\fP + +\fBvoid png_set_write_user_transform_fn (png_structp \fP\fIpng_ptr\fP\fB, png_user_transform_ptr \fIwrite_user_transform_fn\fP\fB);\fP + +\fBint png_sig_cmp (png_bytep \fP\fIsig\fP\fB, png_size_t \fP\fIstart\fP\fB, png_size_t \fInum_to_check\fP\fB);\fP + +\fBvoid png_start_read_image (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_warning (png_structp \fP\fIpng_ptr\fP\fB, png_const_charp \fImessage\fP\fB);\fP + +\fBvoid png_write_chunk (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIchunk_name\fP\fB, png_bytep \fP\fIdata\fP\fB, png_size_t \fIlength\fP\fB);\fP + +\fBvoid png_write_chunk_data (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIdata\fP\fB, png_size_t \fIlength\fP\fB);\fP + +\fBvoid png_write_chunk_end (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_write_chunk_start (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIchunk_name\fP\fB, png_uint_32 \fIlength\fP\fB);\fP + +\fBvoid png_write_end (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP + +\fBvoid png_write_flush (png_structp \fIpng_ptr\fP\fB);\fP + +\fBvoid png_write_image (png_structp \fP\fIpng_ptr\fP\fB, png_bytepp \fIimage\fP\fB);\fP + +\fBvoid png_write_info (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP + +\fBvoid png_write_info_before_PLTE (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP + +\fBvoid png_write_png (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, int \fP\fItransforms\fP\fB, png_voidp \fIparams\fP\fB);\fP + +\fBvoid png_write_row (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fIrow\fP\fB);\fP + +\fBvoid png_write_rows (png_structp \fP\fIpng_ptr\fP\fB, png_bytepp \fP\fIrow\fP\fB, png_uint_32 \fInum_rows\fP\fB);\fP + +\fBvoid png_write_sig (png_structp \fIpng_ptr\fP\fB);\fP + +.SH DESCRIPTION +The +.I libpng +library supports encoding, decoding, and various manipulations of +the Portable Network Graphics (PNG) format image files. It uses the +.IR zlib(3) +compression library. +Following is a copy of the libpng-manual.txt file that accompanies libpng. +.SH LIBPNG.TXT +libpng-manual.txt - A description on how to use and modify libpng + + libpng version 1.6.2 - April 25, 2013 + Updated and distributed by Glenn Randers-Pehrson + + Copyright (c) 1998-2013 Glenn Randers-Pehrson + + This document is released under the libpng license. + For conditions of distribution and use, see the disclaimer + and license in png.h + + Based on: + + libpng versions 0.97, January 1998, through 1.6.2 - April 25, 2013 + Updated and distributed by Glenn Randers-Pehrson + Copyright (c) 1998-2013 Glenn Randers-Pehrson + + libpng 1.0 beta 6 version 0.96 May 28, 1997 + Updated and distributed by Andreas Dilger + Copyright (c) 1996, 1997 Andreas Dilger + + libpng 1.0 beta 2 - version 0.88 January 26, 1996 + For conditions of distribution and use, see copyright + notice in png.h. Copyright (c) 1995, 1996 Guy Eric + Schalnat, Group 42, Inc. + + Updated/rewritten per request in the libpng FAQ + Copyright (c) 1995, 1996 Frank J. T. Wojcik + December 18, 1995 & January 20, 1996 + + TABLE OF CONTENTS + + I. Introduction + II. Structures + III. Reading + IV. Writing + V. Simplified API + VI. Modifying/Customizing libpng + VII. MNG support + VIII. Changes to Libpng from version 0.88 + IX. Changes to Libpng from version 1.0.x to 1.2.x + X. Changes to Libpng from version 1.0.x/1.2.x to 1.4.x + XI. Changes to Libpng from version 1.4.x to 1.5.x + XII. Changes to Libpng from version 1.5.x to 1.6.x + XIII. Detecting libpng + XIV. Source code repository + XV. Coding style + XVI. Y2K Compliance in libpng + +.SH I. Introduction + +This file describes how to use and modify the PNG reference library +(known as libpng) for your own use. There are five sections to this +file: introduction, structures, reading, writing, and modification and +configuration notes for various special platforms. In addition to this +file, example.c is a good starting point for using the library, as +it is heavily commented and should include everything most people +will need. We assume that libpng is already installed; see the +INSTALL file for instructions on how to install libpng. + +For examples of libpng usage, see the files "example.c", "pngtest.c", +and the files in the "contrib" directory, all of which are included in +the libpng distribution. + +Libpng was written as a companion to the PNG specification, as a way +of reducing the amount of time and effort it takes to support the PNG +file format in application programs. + +The PNG specification (second edition), November 2003, is available as +a W3C Recommendation and as an ISO Standard (ISO/IEC 15948:2004 (E)) at +. It is technically equivalent +to the PNG specification (second edition) but has some additional material. + +The PNG-1.0 specification is available +as RFC 2083 and as a +W3C Recommendation . + +Some additional chunks are described in the special-purpose public chunks +documents at . + +Other information +about PNG, and the latest version of libpng, can be found at the PNG home +page, . + +Most users will not have to modify the library significantly; advanced +users may want to modify it more. All attempts were made to make it as +complete as possible, while keeping the code easy to understand. +Currently, this library only supports C. Support for other languages +is being considered. + +Libpng has been designed to handle multiple sessions at one time, +to be easily modifiable, to be portable to the vast majority of +machines (ANSI, K&R, 16-, 32-, and 64-bit) available, and to be easy +to use. The ultimate goal of libpng is to promote the acceptance of +the PNG file format in whatever way possible. While there is still +work to be done (see the TODO file), libpng should cover the +majority of the needs of its users. + +Libpng uses zlib for its compression and decompression of PNG files. +Further information about zlib, and the latest version of zlib, can +be found at the zlib home page, . +The zlib compression utility is a general purpose utility that is +useful for more than PNG files, and can be used without libpng. +See the documentation delivered with zlib for more details. +You can usually find the source files for the zlib utility wherever you +find the libpng source files. + +Libpng is thread safe, provided the threads are using different +instances of the structures. Each thread should have its own +png_struct and png_info instances, and thus its own image. +Libpng does not protect itself against two threads using the +same instance of a structure. + +.SH II. Structures + +There are two main structures that are important to libpng, png_struct +and png_info. Both are internal structures that are no longer exposed +in the libpng interface (as of libpng 1.5.0). + +The png_info structure is designed to provide information about the +PNG file. At one time, the fields of png_info were intended to be +directly accessible to the user. However, this tended to cause problems +with applications using dynamically loaded libraries, and as a result +a set of interface functions for png_info (the png_get_*() and png_set_*() +functions) was developed, and direct access to the png_info fields was +deprecated.. + +The png_struct structure is the object used by the library to decode a +single image. As of 1.5.0 this structure is also not exposed. + +Almost all libpng APIs require a pointer to a png_struct as the first argument. +Many (in particular the png_set and png_get APIs) also require a pointer +to png_info as the second argument. Some application visible macros +defined in png.h designed for basic data access (reading and writing +integers in the PNG format) don't take a png_info pointer, but it's almost +always safe to assume that a (png_struct*) has to be passed to call an API +function. + +You can have more than one png_info structure associated with an image, +as illustrated in pngtest.c, one for information valid prior to the +IDAT chunks and another (called "end_info" below) for things after them. + +The png.h header file is an invaluable reference for programming with libpng. +And while I'm on the topic, make sure you include the libpng header file: + +#include + +and also (as of libpng-1.5.0) the zlib header file, if you need it: + +#include + +.SS Types + +The png.h header file defines a number of integral types used by the +APIs. Most of these are fairly obvious; for example types corresponding +to integers of particular sizes and types for passing color values. + +One exception is how non-integral numbers are handled. For application +convenience most APIs that take such numbers have C (double) arguments; +however, internally PNG, and libpng, use 32 bit signed integers and encode +the value by multiplying by 100,000. As of libpng 1.5.0 a convenience +macro PNG_FP_1 is defined in png.h along with a type (png_fixed_point) +which is simply (png_int_32). + +All APIs that take (double) arguments also have a matching API that +takes the corresponding fixed point integer arguments. The fixed point +API has the same name as the floating point one with "_fixed" appended. +The actual range of values permitted in the APIs is frequently less than +the full range of (png_fixed_point) (-21474 to +21474). When APIs require +a non-negative argument the type is recorded as png_uint_32 above. Consult +the header file and the text below for more information. + +Special care must be take with sCAL chunk handling because the chunk itself +uses non-integral values encoded as strings containing decimal floating point +numbers. See the comments in the header file. + +.SS Configuration + +The main header file function declarations are frequently protected by C +preprocessing directives of the form: + + #ifdef PNG_feature_SUPPORTED + declare-function + #endif + ... + #ifdef PNG_feature_SUPPORTED + use-function + #endif + +The library can be built without support for these APIs, although a +standard build will have all implemented APIs. Application programs +should check the feature macros before using an API for maximum +portability. From libpng 1.5.0 the feature macros set during the build +of libpng are recorded in the header file "pnglibconf.h" and this file +is always included by png.h. + +If you don't need to change the library configuration from the default, skip to +the next section ("Reading"). + +Notice that some of the makefiles in the 'scripts' directory and (in 1.5.0) all +of the build project files in the 'projects' directory simply copy +scripts/pnglibconf.h.prebuilt to pnglibconf.h. This means that these build +systems do not permit easy auto-configuration of the library - they only +support the default configuration. + +The easiest way to make minor changes to the libpng configuration when +auto-configuration is supported is to add definitions to the command line +using (typically) CPPFLAGS. For example: + +CPPFLAGS=-DPNG_NO_FLOATING_ARITHMETIC + +will change the internal libpng math implementation for gamma correction and +other arithmetic calculations to fixed point, avoiding the need for fast +floating point support. The result can be seen in the generated pnglibconf.h - +make sure it contains the changed feature macro setting. + +If you need to make more extensive configuration changes - more than one or two +feature macro settings - you can either add -DPNG_USER_CONFIG to the build +command line and put a list of feature macro settings in pngusr.h or you can set +DFA_XTRA (a makefile variable) to a file containing the same information in the +form of 'option' settings. + +A. Changing pnglibconf.h + +A variety of methods exist to build libpng. Not all of these support +reconfiguration of pnglibconf.h. To reconfigure pnglibconf.h it must either be +rebuilt from scripts/pnglibconf.dfa using awk or it must be edited by hand. + +Hand editing is achieved by copying scripts/pnglibconf.h.prebuilt to +pnglibconf.h and changing the lines defining the supported features, paying +very close attention to the 'option' information in scripts/pnglibconf.dfa +that describes those features and their requirements. This is easy to get +wrong. + +B. Configuration using DFA_XTRA + +Rebuilding from pnglibconf.dfa is easy if a functioning 'awk', or a later +variant such as 'nawk' or 'gawk', is available. The configure build will +automatically find an appropriate awk and build pnglibconf.h. +The scripts/pnglibconf.mak file contains a set of make rules for doing the +same thing if configure is not used, and many of the makefiles in the scripts +directory use this approach. + +When rebuilding simply write a new file containing changed options and set +DFA_XTRA to the name of this file. This causes the build to append the new file +to the end of scripts/pnglibconf.dfa. The pngusr.dfa file should contain lines +of the following forms: + +everything = off + +This turns all optional features off. Include it at the start of pngusr.dfa to +make it easier to build a minimal configuration. You will need to turn at least +some features on afterward to enable either reading or writing code, or both. + +option feature on +option feature off + +Enable or disable a single feature. This will automatically enable other +features required by a feature that is turned on or disable other features that +require a feature which is turned off. Conflicting settings will cause an error +message to be emitted by awk. + +setting feature default value + +Changes the default value of setting 'feature' to 'value'. There are a small +number of settings listed at the top of pnglibconf.h, they are documented in the +source code. Most of these values have performance implications for the library +but most of them have no visible effect on the API. Some can also be overridden +from the API. + +This method of building a customized pnglibconf.h is illustrated in +contrib/pngminim/*. See the "$(PNGCONF):" target in the makefile and +pngusr.dfa in these directories. + +C. Configuration using PNG_USR_CONFIG + +If -DPNG_USR_CONFIG is added to the CFLAGS when pnglibconf.h is built the file +pngusr.h will automatically be included before the options in +scripts/pnglibconf.dfa are processed. Your pngusr.h file should contain only +macro definitions turning features on or off or setting settings. + +Apart from the global setting "everything = off" all the options listed above +can be set using macros in pngusr.h: + +#define PNG_feature_SUPPORTED + +is equivalent to: + +option feature on + +#define PNG_NO_feature + +is equivalent to: + +option feature off + +#define PNG_feature value + +is equivalent to: + +setting feature default value + +Notice that in both cases, pngusr.dfa and pngusr.h, the contents of the +pngusr file you supply override the contents of scripts/pnglibconf.dfa + +If confusing or incomprehensible behavior results it is possible to +examine the intermediate file pnglibconf.dfn to find the full set of +dependency information for each setting and option. Simply locate the +feature in the file and read the C comments that precede it. + +This method is also illustrated in the contrib/pngminim/* makefiles and +pngusr.h. + +.SH III. Reading + +We'll now walk you through the possible functions to call when reading +in a PNG file sequentially, briefly explaining the syntax and purpose +of each one. See example.c and png.h for more detail. While +progressive reading is covered in the next section, you will still +need some of the functions discussed in this section to read a PNG +file. + +.SS Setup + +You will want to do the I/O initialization(*) before you get into libpng, +so if it doesn't work, you don't have much to undo. Of course, you +will also want to insure that you are, in fact, dealing with a PNG +file. Libpng provides a simple check to see if a file is a PNG file. +To use it, pass in the first 1 to 8 bytes of the file to the function +png_sig_cmp(), and it will return 0 (false) if the bytes match the +corresponding bytes of the PNG signature, or nonzero (true) otherwise. +Of course, the more bytes you pass in, the greater the accuracy of the +prediction. + +If you are intending to keep the file pointer open for use in libpng, +you must ensure you don't read more than 8 bytes from the beginning +of the file, and you also have to make a call to png_set_sig_bytes_read() +with the number of bytes you read from the beginning. Libpng will +then only check the bytes (if any) that your program didn't read. + +(*): If you are not using the standard I/O functions, you will need +to replace them with custom functions. See the discussion under +Customizing libpng. + + + FILE *fp = fopen(file_name, "rb"); + if (!fp) + { + return (ERROR); + } + + fread(header, 1, number, fp); + is_png = !png_sig_cmp(header, 0, number); + + if (!is_png) + { + return (NOT_PNG); + } + + +Next, png_struct and png_info need to be allocated and initialized. In +order to ensure that the size of these structures is correct even with a +dynamically linked libpng, there are functions to initialize and +allocate the structures. We also pass the library version, optional +pointers to error handling functions, and a pointer to a data struct for +use by the error functions, if necessary (the pointer and functions can +be NULL if the default error handlers are to be used). See the section +on Changes to Libpng below regarding the old initialization functions. +The structure allocation functions quietly return NULL if they fail to +create the structure, so your application should check for that. + + png_structp png_ptr = png_create_read_struct + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn); + + if (!png_ptr) + return (ERROR); + + png_infop info_ptr = png_create_info_struct(png_ptr); + + if (!info_ptr) + { + png_destroy_read_struct(&png_ptr, + (png_infopp)NULL, (png_infopp)NULL); + return (ERROR); + } + +If you want to use your own memory allocation routines, +use a libpng that was built with PNG_USER_MEM_SUPPORTED defined, and use +png_create_read_struct_2() instead of png_create_read_struct(): + + png_structp png_ptr = png_create_read_struct_2 + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn, (png_voidp) + user_mem_ptr, user_malloc_fn, user_free_fn); + +The error handling routines passed to png_create_read_struct() +and the memory alloc/free routines passed to png_create_struct_2() +are only necessary if you are not using the libpng supplied error +handling and memory alloc/free functions. + +When libpng encounters an error, it expects to longjmp back +to your routine. Therefore, you will need to call setjmp and pass +your png_jmpbuf(png_ptr). If you read the file from different +routines, you will need to update the longjmp buffer every time you enter +a new routine that will call a png_*() function. + +See your documentation of setjmp/longjmp for your compiler for more +information on setjmp/longjmp. See the discussion on libpng error +handling in the Customizing Libpng section below for more information +on the libpng error handling. If an error occurs, and libpng longjmp's +back to your setjmp, you will want to call png_destroy_read_struct() to +free any memory. + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + &end_info); + fclose(fp); + return (ERROR); + } + +Pass (png_infopp)NULL instead of &end_info if you didn't create +an end_info structure. + +If you would rather avoid the complexity of setjmp/longjmp issues, +you can compile libpng with PNG_NO_SETJMP, in which case +errors will result in a call to PNG_ABORT() which defaults to abort(). + +You can #define PNG_ABORT() to a function that does something +more useful than abort(), as long as your function does not +return. + +Now you need to set up the input code. The default for libpng is to +use the C function fread(). If you use this, you will need to pass a +valid FILE * in the function png_init_io(). Be sure that the file is +opened in binary mode. If you wish to handle reading data in another +way, you need not call the png_init_io() function, but you must then +implement the libpng I/O methods discussed in the Customizing Libpng +section below. + + png_init_io(png_ptr, fp); + +If you had previously opened the file and read any of the signature from +the beginning in order to see if this was a PNG file, you need to let +libpng know that there are some bytes missing from the start of the file. + + png_set_sig_bytes(png_ptr, number); + +You can change the zlib compression buffer size to be used while +reading compressed data with + + png_set_compression_buffer_size(png_ptr, buffer_size); + +where the default size is 8192 bytes. Note that the buffer size +is changed immediately and the buffer is reallocated immediately, +instead of setting a flag to be acted upon later. + +If you want CRC errors to be handled in a different manner than +the default, use + + png_set_crc_action(png_ptr, crit_action, ancil_action); + +The values for png_set_crc_action() say how libpng is to handle CRC errors in +ancillary and critical chunks, and whether to use the data contained +therein. Note that it is impossible to "discard" data in a critical +chunk. + +Choices for (int) crit_action are + PNG_CRC_DEFAULT 0 error/quit + PNG_CRC_ERROR_QUIT 1 error/quit + PNG_CRC_WARN_USE 3 warn/use data + PNG_CRC_QUIET_USE 4 quiet/use data + PNG_CRC_NO_CHANGE 5 use the current value + +Choices for (int) ancil_action are + PNG_CRC_DEFAULT 0 error/quit + PNG_CRC_ERROR_QUIT 1 error/quit + PNG_CRC_WARN_DISCARD 2 warn/discard data + PNG_CRC_WARN_USE 3 warn/use data + PNG_CRC_QUIET_USE 4 quiet/use data + PNG_CRC_NO_CHANGE 5 use the current value + +.SS Setting up callback code + +You can set up a callback function to handle any unknown chunks in the +input stream. You must supply the function + + read_chunk_callback(png_structp png_ptr, + png_unknown_chunkp chunk); + { + /* The unknown chunk structure contains your + chunk data, along with similar data for any other + unknown chunks: */ + + png_byte name[5]; + png_byte *data; + png_size_t size; + + /* Note that libpng has already taken care of + the CRC handling */ + + /* put your code here. Search for your chunk in the + unknown chunk structure, process it, and return one + of the following: */ + + return (-n); /* chunk had an error */ + return (0); /* did not recognize */ + return (n); /* success */ + } + +(You can give your function another name that you like instead of +"read_chunk_callback") + +To inform libpng about your function, use + + png_set_read_user_chunk_fn(png_ptr, user_chunk_ptr, + read_chunk_callback); + +This names not only the callback function, but also a user pointer that +you can retrieve with + + png_get_user_chunk_ptr(png_ptr); + +If you call the png_set_read_user_chunk_fn() function, then all unknown +chunks which the callback does not handle will be saved when read. You can +cause them to be discarded by returning '1' ("handled") instead of '0'. This +behavior will change in libpng 1.7 and the default handling set by the +png_set_keep_unknown_chunks() function, described below, will be used when the +callback returns 0. If you want the existing behavior you should set the global +default to PNG_HANDLE_CHUNK_IF_SAFE now; this is compatible with all current +versions of libpng and with 1.7. Libpng 1.6 issues a warning if you keep the +default, or PNG_HANDLE_CHUNK_NEVER, and the callback returns 0. + +At this point, you can set up a callback function that will be +called after each row has been read, which you can use to control +a progress meter or the like. It's demonstrated in pngtest.c. +You must supply a function + + void read_row_callback(png_structp png_ptr, + png_uint_32 row, int pass); + { + /* put your code here */ + } + +(You can give it another name that you like instead of "read_row_callback") + +To inform libpng about your function, use + + png_set_read_status_fn(png_ptr, read_row_callback); + +When this function is called the row has already been completely processed and +the 'row' and 'pass' refer to the next row to be handled. For the +non-interlaced case the row that was just handled is simply one less than the +passed in row number, and pass will always be 0. For the interlaced case the +same applies unless the row value is 0, in which case the row just handled was +the last one from one of the preceding passes. Because interlacing may skip a +pass you cannot be sure that the preceding pass is just 'pass-1', if you really +need to know what the last pass is record (row,pass) from the callback and use +the last recorded value each time. + +As with the user transform you can find the output row using the +PNG_ROW_FROM_PASS_ROW macro. + +.SS Unknown-chunk handling + +Now you get to set the way the library processes unknown chunks in the +input PNG stream. Both known and unknown chunks will be read. Normal +behavior is that known chunks will be parsed into information in +various info_ptr members while unknown chunks will be discarded. This +behavior can be wasteful if your application will never use some known +chunk types. To change this, you can call: + + png_set_keep_unknown_chunks(png_ptr, keep, + chunk_list, num_chunks); + + keep - 0: default unknown chunk handling + 1: ignore; do not keep + 2: keep only if safe-to-copy + 3: keep even if unsafe-to-copy + + You can use these definitions: + PNG_HANDLE_CHUNK_AS_DEFAULT 0 + PNG_HANDLE_CHUNK_NEVER 1 + PNG_HANDLE_CHUNK_IF_SAFE 2 + PNG_HANDLE_CHUNK_ALWAYS 3 + + chunk_list - list of chunks affected (a byte string, + five bytes per chunk, NULL or '\0' if + num_chunks is positive; ignored if + numchunks <= 0). + + num_chunks - number of chunks affected; if 0, all + unknown chunks are affected. If positive, + only the chunks in the list are affected, + and if negative all unknown chunks and + all known chunks except for the IHDR, + PLTE, tRNS, IDAT, and IEND chunks are + affected. + +Unknown chunks declared in this way will be saved as raw data onto a +list of png_unknown_chunk structures. If a chunk that is normally +known to libpng is named in the list, it will be handled as unknown, +according to the "keep" directive. If a chunk is named in successive +instances of png_set_keep_unknown_chunks(), the final instance will +take precedence. The IHDR and IEND chunks should not be named in +chunk_list; if they are, libpng will process them normally anyway. +If you know that your application will never make use of some particular +chunks, use PNG_HANDLE_CHUNK_NEVER (or 1) as demonstrated below. + +Here is an example of the usage of png_set_keep_unknown_chunks(), +where the private "vpAg" chunk will later be processed by a user chunk +callback function: + + png_byte vpAg[5]={118, 112, 65, 103, (png_byte) '\0'}; + + #if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) + png_byte unused_chunks[]= + { + 104, 73, 83, 84, (png_byte) '\0', /* hIST */ + 105, 84, 88, 116, (png_byte) '\0', /* iTXt */ + 112, 67, 65, 76, (png_byte) '\0', /* pCAL */ + 115, 67, 65, 76, (png_byte) '\0', /* sCAL */ + 115, 80, 76, 84, (png_byte) '\0', /* sPLT */ + 116, 73, 77, 69, (png_byte) '\0', /* tIME */ + }; + #endif + + ... + + #if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) + /* ignore all unknown chunks + * (use global setting "2" for libpng16 and earlier): + */ + png_set_keep_unknown_chunks(read_ptr, 2, NULL, 0); + + /* except for vpAg: */ + png_set_keep_unknown_chunks(read_ptr, 2, vpAg, 1); + + /* also ignore unused known chunks: */ + png_set_keep_unknown_chunks(read_ptr, 1, unused_chunks, + (int)(sizeof unused_chunks)/5); + #endif + +.SS User limits + +The PNG specification allows the width and height of an image to be as +large as 2^31-1 (0x7fffffff), or about 2.147 billion rows and columns. +Since very few applications really need to process such large images, +we have imposed an arbitrary 1-million limit on rows and columns. +Larger images will be rejected immediately with a png_error() call. If +you wish to change this limit, you can use + + png_set_user_limits(png_ptr, width_max, height_max); + +to set your own limits, or use width_max = height_max = 0x7fffffffL +to allow all valid dimensions (libpng may reject some very large images +anyway because of potential buffer overflow conditions). + +You should put this statement after you create the PNG structure and +before calling png_read_info(), png_read_png(), or png_process_data(). + +When writing a PNG datastream, put this statement before calling +png_write_info() or png_write_png(). + +If you need to retrieve the limits that are being applied, use + + width_max = png_get_user_width_max(png_ptr); + height_max = png_get_user_height_max(png_ptr); + +The PNG specification sets no limit on the number of ancillary chunks +allowed in a PNG datastream. You can impose a limit on the total number +of sPLT, tEXt, iTXt, zTXt, and unknown chunks that will be stored, with + + png_set_chunk_cache_max(png_ptr, user_chunk_cache_max); + +where 0x7fffffffL means unlimited. You can retrieve this limit with + + chunk_cache_max = png_get_chunk_cache_max(png_ptr); + +You can also set a limit on the amount of memory that a compressed chunk +other than IDAT can occupy, with + + png_set_chunk_malloc_max(png_ptr, user_chunk_malloc_max); + +and you can retrieve the limit with + + chunk_malloc_max = png_get_chunk_malloc_max(png_ptr); + +Any chunks that would cause either of these limits to be exceeded will +be ignored. + +.SS Information about your system + +If you intend to display the PNG or to incorporate it in other image data you +need to tell libpng information about your display or drawing surface so that +libpng can convert the values in the image to match the display. + +From libpng-1.5.4 this information can be set before reading the PNG file +header. In earlier versions png_set_gamma() existed but behaved incorrectly if +called before the PNG file header had been read and png_set_alpha_mode() did not +exist. + +If you need to support versions prior to libpng-1.5.4 test the version number +as illustrated below using "PNG_LIBPNG_VER >= 10504" and follow the procedures +described in the appropriate manual page. + +You give libpng the encoding expected by your system expressed as a 'gamma' +value. You can also specify a default encoding for the PNG file in +case the required information is missing from the file. By default libpng +assumes that the PNG data matches your system, to keep this default call: + + png_set_gamma(png_ptr, screen_gamma, 1/screen_gamma/*file gamma*/); + +or you can use the fixed point equivalent: + + png_set_gamma_fixed(png_ptr, PNG_FP_1*screen_gamma, + PNG_FP_1/screen_gamma); + +If you don't know the gamma for your system it is probably 2.2 - a good +approximation to the IEC standard for display systems (sRGB). If images are +too contrasty or washed out you got the value wrong - check your system +documentation! + +Many systems permit the system gamma to be changed via a lookup table in the +display driver, a few systems, including older Macs, change the response by +default. As of 1.5.4 three special values are available to handle common +situations: + + PNG_DEFAULT_sRGB: Indicates that the system conforms to the + IEC 61966-2-1 standard. This matches almost + all systems. + PNG_GAMMA_MAC_18: Indicates that the system is an older + (pre Mac OS 10.6) Apple Macintosh system with + the default settings. + PNG_GAMMA_LINEAR: Just the fixed point value for 1.0 - indicates + that the system expects data with no gamma + encoding. + +You would use the linear (unencoded) value if you need to process the pixel +values further because this avoids the need to decode and reencode each +component value whenever arithmetic is performed. A lot of graphics software +uses linear values for this reason, often with higher precision component values +to preserve overall accuracy. + +The second thing you may need to tell libpng about is how your system handles +alpha channel information. Some, but not all, PNG files contain an alpha +channel. To display these files correctly you need to compose the data onto a +suitable background, as described in the PNG specification. + +Libpng only supports composing onto a single color (using png_set_background; +see below). Otherwise you must do the composition yourself and, in this case, +you may need to call png_set_alpha_mode: + + #if PNG_LIBPNG_VER >= 10504 + png_set_alpha_mode(png_ptr, mode, screen_gamma); + #else + png_set_gamma(png_ptr, screen_gamma, 1.0/screen_gamma); + #endif + +The screen_gamma value is the same as the argument to png_set_gamma; however, +how it affects the output depends on the mode. png_set_alpha_mode() sets the +file gamma default to 1/screen_gamma, so normally you don't need to call +png_set_gamma. If you need different defaults call png_set_gamma() before +png_set_alpha_mode() - if you call it after it will override the settings made +by png_set_alpha_mode(). + +The mode is as follows: + + PNG_ALPHA_PNG: The data is encoded according to the PNG specification. Red, +green and blue, or gray, components are gamma encoded color +values and are not premultiplied by the alpha value. The +alpha value is a linear measure of the contribution of the +pixel to the corresponding final output pixel. + +You should normally use this format if you intend to perform +color correction on the color values; most, maybe all, color +correction software has no handling for the alpha channel and, +anyway, the math to handle pre-multiplied component values is +unnecessarily complex. + +Before you do any arithmetic on the component values you need +to remove the gamma encoding and multiply out the alpha +channel. See the PNG specification for more detail. It is +important to note that when an image with an alpha channel is +scaled, linear encoded, pre-multiplied component values must +be used! + +The remaining modes assume you don't need to do any further color correction or +that if you do, your color correction software knows all about alpha (it +probably doesn't!) + + PNG_ALPHA_STANDARD: The data libpng produces +is encoded in the standard way +assumed by most correctly written graphics software. +The gamma encoding will be removed by libpng and the +linear component values will be pre-multiplied by the +alpha channel. + +With this format the final image must be re-encoded to +match the display gamma before the image is displayed. +If your system doesn't do that, yet still seems to +perform arithmetic on the pixels without decoding them, +it is broken - check out the modes below. + +With PNG_ALPHA_STANDARD libpng always produces linear +component values, whatever screen_gamma you supply. The +screen_gamma value is, however, used as a default for +the file gamma if the PNG file has no gamma information. + +If you call png_set_gamma() after png_set_alpha_mode() you +will override the linear encoding. Instead the +pre-multiplied pixel values will be gamma encoded but +the alpha channel will still be linear. This may +actually match the requirements of some broken software, +but it is unlikely. + +While linear 8-bit data is often used it has +insufficient precision for any image with a reasonable +dynamic range. To avoid problems, and if your software +supports it, use png_set_expand_16() to force all +components to 16 bits. + + PNG_ALPHA_OPTIMIZED: This mode is the same +as PNG_ALPHA_STANDARD except that +completely opaque pixels are gamma encoded according to +the screen_gamma value. Pixels with alpha less than 1.0 +will still have linear components. + +Use this format if you have control over your +compositing software and so don't do other arithmetic +(such as scaling) on the data you get from libpng. Your +compositing software can simply copy opaque pixels to +the output but still has linear values for the +non-opaque pixels. + +In normal compositing, where the alpha channel encodes +partial pixel coverage (as opposed to broad area +translucency), the inaccuracies of the 8-bit +representation of non-opaque pixels are irrelevant. + +You can also try this format if your software is broken; +it might look better. + + PNG_ALPHA_BROKEN: This is PNG_ALPHA_STANDARD; +however, all component values, +including the alpha channel are gamma encoded. This is +an appropriate format to try if your software, or more +likely hardware, is totally broken, i.e., if it performs +linear arithmetic directly on gamma encoded values. + +In most cases of broken software or hardware the bug in the final display +manifests as a subtle halo around composited parts of the image. You may not +even perceive this as a halo; the composited part of the image may simply appear +separate from the background, as though it had been cut out of paper and pasted +on afterward. + +If you don't have to deal with bugs in software or hardware, or if you can fix +them, there are three recommended ways of using png_set_alpha_mode(): + + png_set_alpha_mode(png_ptr, PNG_ALPHA_PNG, + screen_gamma); + +You can do color correction on the result (libpng does not currently +support color correction internally). When you handle the alpha channel +you need to undo the gamma encoding and multiply out the alpha. + + png_set_alpha_mode(png_ptr, PNG_ALPHA_STANDARD, + screen_gamma); + png_set_expand_16(png_ptr); + +If you are using the high level interface, don't call png_set_expand_16(); +instead pass PNG_TRANSFORM_EXPAND_16 to the interface. + +With this mode you can't do color correction, but you can do arithmetic, +including composition and scaling, on the data without further processing. + + png_set_alpha_mode(png_ptr, PNG_ALPHA_OPTIMIZED, + screen_gamma); + +You can avoid the expansion to 16-bit components with this mode, but you +lose the ability to scale the image or perform other linear arithmetic. +All you can do is compose the result onto a matching output. Since this +mode is libpng-specific you also need to write your own composition +software. + +If you don't need, or can't handle, the alpha channel you can call +png_set_background() to remove it by compositing against a fixed color. Don't +call png_set_strip_alpha() to do this - it will leave spurious pixel values in +transparent parts of this image. + + png_set_background(png_ptr, &background_color, + PNG_BACKGROUND_GAMMA_SCREEN, 0, 1); + +The background_color is an RGB or grayscale value according to the data format +libpng will produce for you. Because you don't yet know the format of the PNG +file, if you call png_set_background at this point you must arrange for the +format produced by libpng to always have 8-bit or 16-bit components and then +store the color as an 8-bit or 16-bit color as appropriate. The color contains +separate gray and RGB component values, so you can let libpng produce gray or +RGB output according to the input format, but low bit depth grayscale images +must always be converted to at least 8-bit format. (Even though low bit depth +grayscale images can't have an alpha channel they can have a transparent +color!) + +You set the transforms you need later, either as flags to the high level +interface or libpng API calls for the low level interface. For reference the +settings and API calls required are: + +8-bit values: + PNG_TRANSFORM_SCALE_16 | PNG_EXPAND + png_set_expand(png_ptr); png_set_scale_16(png_ptr); + + If you must get exactly the same inaccurate results + produced by default in versions prior to libpng-1.5.4, + use PNG_TRANSFORM_STRIP_16 and png_set_strip_16(png_ptr) + instead. + +16-bit values: + PNG_TRANSFORM_EXPAND_16 + png_set_expand_16(png_ptr); + +In either case palette image data will be expanded to RGB. If you just want +color data you can add PNG_TRANSFORM_GRAY_TO_RGB or png_set_gray_to_rgb(png_ptr) +to the list. + +Calling png_set_background before the PNG file header is read will not work +prior to libpng-1.5.4. Because the failure may result in unexpected warnings or +errors it is therefore much safer to call png_set_background after the head has +been read. Unfortunately this means that prior to libpng-1.5.4 it cannot be +used with the high level interface. + +.SS The high-level read interface + +At this point there are two ways to proceed; through the high-level +read interface, or through a sequence of low-level read operations. +You can use the high-level interface if (a) you are willing to read +the entire image into memory, and (b) the input transformations +you want to do are limited to the following set: + + PNG_TRANSFORM_IDENTITY No transformation + PNG_TRANSFORM_SCALE_16 Strip 16-bit samples to + 8-bit accurately + PNG_TRANSFORM_STRIP_16 Chop 16-bit samples to + 8-bit less accurately + PNG_TRANSFORM_STRIP_ALPHA Discard the alpha channel + PNG_TRANSFORM_PACKING Expand 1, 2 and 4-bit + samples to bytes + PNG_TRANSFORM_PACKSWAP Change order of packed + pixels to LSB first + PNG_TRANSFORM_EXPAND Perform set_expand() + PNG_TRANSFORM_INVERT_MONO Invert monochrome images + PNG_TRANSFORM_SHIFT Normalize pixels to the + sBIT depth + PNG_TRANSFORM_BGR Flip RGB to BGR, RGBA + to BGRA + PNG_TRANSFORM_SWAP_ALPHA Flip RGBA to ARGB or GA + to AG + PNG_TRANSFORM_INVERT_ALPHA Change alpha from opacity + to transparency + PNG_TRANSFORM_SWAP_ENDIAN Byte-swap 16-bit samples + PNG_TRANSFORM_GRAY_TO_RGB Expand grayscale samples + to RGB (or GA to RGBA) + PNG_TRANSFORM_EXPAND_16 Expand samples to 16 bits + +(This excludes setting a background color, doing gamma transformation, +quantizing, and setting filler.) If this is the case, simply do this: + + png_read_png(png_ptr, info_ptr, png_transforms, NULL) + +where png_transforms is an integer containing the bitwise OR of some +set of transformation flags. This call is equivalent to png_read_info(), +followed the set of transformations indicated by the transform mask, +then png_read_image(), and finally png_read_end(). + +(The final parameter of this call is not yet used. Someday it might point +to transformation parameters required by some future input transform.) + +You must use png_transforms and not call any png_set_transform() functions +when you use png_read_png(). + +After you have called png_read_png(), you can retrieve the image data +with + + row_pointers = png_get_rows(png_ptr, info_ptr); + +where row_pointers is an array of pointers to the pixel data for each row: + + png_bytep row_pointers[height]; + +If you know your image size and pixel size ahead of time, you can allocate +row_pointers prior to calling png_read_png() with + + if (height > PNG_UINT_32_MAX/(sizeof (png_byte))) + png_error (png_ptr, + "Image is too tall to process in memory"); + + if (width > PNG_UINT_32_MAX/pixel_size) + png_error (png_ptr, + "Image is too wide to process in memory"); + + row_pointers = png_malloc(png_ptr, + height*(sizeof (png_bytep))); + + for (int i=0; i) and +png_get_(png_ptr, info_ptr, ...) functions return non-zero if the +data has been read, or zero if it is missing. The parameters to the +png_get_ are set directly if they are simple data types, or a +pointer into the info_ptr is returned for any complex types. + +The colorspace data from gAMA, cHRM, sRGB, iCCP, and sBIT chunks +is simply returned to give the application information about how the +image was encoded. Libpng itself only does transformations using the file +gamma when combining semitransparent pixels with the background color, and, +since libpng-1.6.0, when converting between 8-bit sRGB and 16-bit linear pixels +within the simplified API. Libpng also uses the file gamma when converting +RGB to gray, beginning with libpng-1.0.5, if the application calls +png_set_rgb_to_gray()). + + png_get_PLTE(png_ptr, info_ptr, &palette, + &num_palette); + + palette - the palette for the file + (array of png_color) + + num_palette - number of entries in the palette + + png_get_gAMA(png_ptr, info_ptr, &file_gamma); + png_get_gAMA_fixed(png_ptr, info_ptr, &int_file_gamma); + + file_gamma - the gamma at which the file is + written (PNG_INFO_gAMA) + + int_file_gamma - 100,000 times the gamma at which the + file is written + + png_get_cHRM(png_ptr, info_ptr, &white_x, &white_y, &red_x, + &red_y, &green_x, &green_y, &blue_x, &blue_y) + png_get_cHRM_XYZ(png_ptr, info_ptr, &red_X, &red_Y, &red_Z, + &green_X, &green_Y, &green_Z, &blue_X, &blue_Y, + &blue_Z) + png_get_cHRM_fixed(png_ptr, info_ptr, &int_white_x, + &int_white_y, &int_red_x, &int_red_y, + &int_green_x, &int_green_y, &int_blue_x, + &int_blue_y) + png_get_cHRM_XYZ_fixed(png_ptr, info_ptr, &int_red_X, &int_red_Y, + &int_red_Z, &int_green_X, &int_green_Y, + &int_green_Z, &int_blue_X, &int_blue_Y, + &int_blue_Z) + + {white,red,green,blue}_{x,y} + A color space encoding specified using the + chromaticities of the end points and the + white point. (PNG_INFO_cHRM) + + {red,green,blue}_{X,Y,Z} + A color space encoding specified using the + encoding end points - the CIE tristimulus + specification of the intended color of the red, + green and blue channels in the PNG RGB data. + The white point is simply the sum of the three + end points. (PNG_INFO_cHRM) + + png_get_sRGB(png_ptr, info_ptr, &srgb_intent); + + file_srgb_intent - the rendering intent (PNG_INFO_sRGB) + The presence of the sRGB chunk + means that the pixel data is in the + sRGB color space. This chunk also + implies specific values of gAMA and + cHRM. + + png_get_iCCP(png_ptr, info_ptr, &name, + &compression_type, &profile, &proflen); + + name - The profile name. + + compression_type - The compression type; always + PNG_COMPRESSION_TYPE_BASE for PNG 1.0. + You may give NULL to this argument to + ignore it. + + profile - International Color Consortium color + profile data. May contain NULs. + + proflen - length of profile data in bytes. + + png_get_sBIT(png_ptr, info_ptr, &sig_bit); + + sig_bit - the number of significant bits for + (PNG_INFO_sBIT) each of the gray, + red, green, and blue channels, + whichever are appropriate for the + given color type (png_color_16) + + png_get_tRNS(png_ptr, info_ptr, &trans_alpha, + &num_trans, &trans_color); + + trans_alpha - array of alpha (transparency) + entries for palette (PNG_INFO_tRNS) + + num_trans - number of transparent entries + (PNG_INFO_tRNS) + + trans_color - graylevel or color sample values of + the single transparent color for + non-paletted images (PNG_INFO_tRNS) + + png_get_hIST(png_ptr, info_ptr, &hist); + (PNG_INFO_hIST) + + hist - histogram of palette (array of + png_uint_16) + + png_get_tIME(png_ptr, info_ptr, &mod_time); + + mod_time - time image was last modified + (PNG_VALID_tIME) + + png_get_bKGD(png_ptr, info_ptr, &background); + + background - background color (of type + png_color_16p) (PNG_VALID_bKGD) + valid 16-bit red, green and blue + values, regardless of color_type + + num_comments = png_get_text(png_ptr, info_ptr, + &text_ptr, &num_text); + + num_comments - number of comments + + text_ptr - array of png_text holding image + comments + + text_ptr[i].compression - type of compression used + on "text" PNG_TEXT_COMPRESSION_NONE + PNG_TEXT_COMPRESSION_zTXt + PNG_ITXT_COMPRESSION_NONE + PNG_ITXT_COMPRESSION_zTXt + + text_ptr[i].key - keyword for comment. Must contain + 1-79 characters. + + text_ptr[i].text - text comments for current + keyword. Can be empty. + + text_ptr[i].text_length - length of text string, + after decompression, 0 for iTXt + + text_ptr[i].itxt_length - length of itxt string, + after decompression, 0 for tEXt/zTXt + + text_ptr[i].lang - language of comment (empty + string for unknown). + + text_ptr[i].lang_key - keyword in UTF-8 + (empty string for unknown). + + Note that the itxt_length, lang, and lang_key + members of the text_ptr structure only exist when the + library is built with iTXt chunk support. Prior to + libpng-1.4.0 the library was built by default without + iTXt support. Also note that when iTXt is supported, + they contain NULL pointers when the "compression" + field contains PNG_TEXT_COMPRESSION_NONE or + PNG_TEXT_COMPRESSION_zTXt. + + num_text - number of comments (same as + num_comments; you can put NULL here + to avoid the duplication) + + Note while png_set_text() will accept text, language, + and translated keywords that can be NULL pointers, the + structure returned by png_get_text will always contain + regular zero-terminated C strings. They might be + empty strings but they will never be NULL pointers. + + num_spalettes = png_get_sPLT(png_ptr, info_ptr, + &palette_ptr); + + num_spalettes - number of sPLT chunks read. + + palette_ptr - array of palette structures holding + contents of one or more sPLT chunks + read. + + png_get_oFFs(png_ptr, info_ptr, &offset_x, &offset_y, + &unit_type); + + offset_x - positive offset from the left edge + of the screen (can be negative) + + offset_y - positive offset from the top edge + of the screen (can be negative) + + unit_type - PNG_OFFSET_PIXEL, PNG_OFFSET_MICROMETER + + png_get_pHYs(png_ptr, info_ptr, &res_x, &res_y, + &unit_type); + + res_x - pixels/unit physical resolution in + x direction + + res_y - pixels/unit physical resolution in + x direction + + unit_type - PNG_RESOLUTION_UNKNOWN, + PNG_RESOLUTION_METER + + png_get_sCAL(png_ptr, info_ptr, &unit, &width, + &height) + + unit - physical scale units (an integer) + + width - width of a pixel in physical scale units + + height - height of a pixel in physical scale units + (width and height are doubles) + + png_get_sCAL_s(png_ptr, info_ptr, &unit, &width, + &height) + + unit - physical scale units (an integer) + + width - width of a pixel in physical scale units + (expressed as a string) + + height - height of a pixel in physical scale units + (width and height are strings like "2.54") + + num_unknown_chunks = png_get_unknown_chunks(png_ptr, + info_ptr, &unknowns) + + unknowns - array of png_unknown_chunk + structures holding unknown chunks + + unknowns[i].name - name of unknown chunk + + unknowns[i].data - data of unknown chunk + + unknowns[i].size - size of unknown chunk's data + + unknowns[i].location - position of chunk in file + + The value of "i" corresponds to the order in which the + chunks were read from the PNG file or inserted with the + png_set_unknown_chunks() function. + + The value of "location" is a bitwise "or" of + + PNG_HAVE_IHDR (0x01) + PNG_HAVE_PLTE (0x02) + PNG_AFTER_IDAT (0x08) + +The data from the pHYs chunk can be retrieved in several convenient +forms: + + res_x = png_get_x_pixels_per_meter(png_ptr, + info_ptr) + + res_y = png_get_y_pixels_per_meter(png_ptr, + info_ptr) + + res_x_and_y = png_get_pixels_per_meter(png_ptr, + info_ptr) + + res_x = png_get_x_pixels_per_inch(png_ptr, + info_ptr) + + res_y = png_get_y_pixels_per_inch(png_ptr, + info_ptr) + + res_x_and_y = png_get_pixels_per_inch(png_ptr, + info_ptr) + + aspect_ratio = png_get_pixel_aspect_ratio(png_ptr, + info_ptr) + + Each of these returns 0 [signifying "unknown"] if + the data is not present or if res_x is 0; + res_x_and_y is 0 if res_x != res_y + + Note that because of the way the resolutions are + stored internally, the inch conversions won't + come out to exactly even number. For example, + 72 dpi is stored as 0.28346 pixels/meter, and + when this is retrieved it is 71.9988 dpi, so + be sure to round the returned value appropriately + if you want to display a reasonable-looking result. + +The data from the oFFs chunk can be retrieved in several convenient +forms: + + x_offset = png_get_x_offset_microns(png_ptr, info_ptr); + + y_offset = png_get_y_offset_microns(png_ptr, info_ptr); + + x_offset = png_get_x_offset_inches(png_ptr, info_ptr); + + y_offset = png_get_y_offset_inches(png_ptr, info_ptr); + + Each of these returns 0 [signifying "unknown" if both + x and y are 0] if the data is not present or if the + chunk is present but the unit is the pixel. The + remark about inexact inch conversions applies here + as well, because a value in inches can't always be + converted to microns and back without some loss + of precision. + +For more information, see the +PNG specification for chunk contents. Be careful with trusting +rowbytes, as some of the transformations could increase the space +needed to hold a row (expand, filler, gray_to_rgb, etc.). +See png_read_update_info(), below. + +A quick word about text_ptr and num_text. PNG stores comments in +keyword/text pairs, one pair per chunk, with no limit on the number +of text chunks, and a 2^31 byte limit on their size. While there are +suggested keywords, there is no requirement to restrict the use to these +strings. It is strongly suggested that keywords and text be sensible +to humans (that's the point), so don't use abbreviations. Non-printing +symbols are not allowed. See the PNG specification for more details. +There is also no requirement to have text after the keyword. + +Keywords should be limited to 79 Latin-1 characters without leading or +trailing spaces, but non-consecutive spaces are allowed within the +keyword. It is possible to have the same keyword any number of times. +The text_ptr is an array of png_text structures, each holding a +pointer to a language string, a pointer to a keyword and a pointer to +a text string. The text string, language code, and translated +keyword may be empty or NULL pointers. The keyword/text +pairs are put into the array in the order that they are received. +However, some or all of the text chunks may be after the image, so, to +make sure you have read all the text chunks, don't mess with these +until after you read the stuff after the image. This will be +mentioned again below in the discussion that goes with png_read_end(). + +.SS Input transformations + +After you've read the header information, you can set up the library +to handle any special transformations of the image data. The various +ways to transform the data will be described in the order that they +should occur. This is important, as some of these change the color +type and/or bit depth of the data, and some others only work on +certain color types and bit depths. + +Transformations you request are ignored if they don't have any meaning for a +particular input data format. However some transformations can have an effect +as a result of a previous transformation. If you specify a contradictory set of +transformations, for example both adding and removing the alpha channel, you +cannot predict the final result. + +The color used for the transparency values should be supplied in the same +format/depth as the current image data. It is stored in the same format/depth +as the image data in a tRNS chunk, so this is what libpng expects for this data. + +The color used for the background value depends on the need_expand argument as +described below. + +Data will be decoded into the supplied row buffers packed into bytes +unless the library has been told to transform it into another format. +For example, 4 bit/pixel paletted or grayscale data will be returned +2 pixels/byte with the leftmost pixel in the high-order bits of the +byte, unless png_set_packing() is called. 8-bit RGB data will be stored +in RGB RGB RGB format unless png_set_filler() or png_set_add_alpha() +is called to insert filler bytes, either before or after each RGB triplet. +16-bit RGB data will be returned RRGGBB RRGGBB, with the most significant +byte of the color value first, unless png_set_scale_16() is called to +transform it to regular RGB RGB triplets, or png_set_filler() or +png_set_add alpha() is called to insert filler bytes, either before or +after each RRGGBB triplet. Similarly, 8-bit or 16-bit grayscale data can +be modified with png_set_filler(), png_set_add_alpha(), png_set_strip_16(), +or png_set_scale_16(). + +The following code transforms grayscale images of less than 8 to 8 bits, +changes paletted images to RGB, and adds a full alpha channel if there is +transparency information in a tRNS chunk. This is most useful on +grayscale images with bit depths of 2 or 4 or if there is a multiple-image +viewing application that wishes to treat all images in the same way. + + if (color_type == PNG_COLOR_TYPE_PALETTE) + png_set_palette_to_rgb(png_ptr); + + if (png_get_valid(png_ptr, info_ptr, + PNG_INFO_tRNS)) png_set_tRNS_to_alpha(png_ptr); + + if (color_type == PNG_COLOR_TYPE_GRAY && + bit_depth < 8) png_set_expand_gray_1_2_4_to_8(png_ptr); + +The first two functions are actually aliases for png_set_expand(), added +in libpng version 1.0.4, with the function names expanded to improve code +readability. In some future version they may actually do different +things. + +As of libpng version 1.2.9, png_set_expand_gray_1_2_4_to_8() was +added. It expands the sample depth without changing tRNS to alpha. + +As of libpng version 1.5.2, png_set_expand_16() was added. It behaves as +png_set_expand(); however, the resultant channels have 16 bits rather than 8. +Use this when the output color or gray channels are made linear to avoid fairly +severe accuracy loss. + + if (bit_depth < 16) + png_set_expand_16(png_ptr); + +PNG can have files with 16 bits per channel. If you only can handle +8 bits per channel, this will strip the pixels down to 8-bit. + + if (bit_depth == 16) +#if PNG_LIBPNG_VER >= 10504 + png_set_scale_16(png_ptr); +#else + png_set_strip_16(png_ptr); +#endif + +(The more accurate "png_set_scale_16()" API became available in libpng version +1.5.4). + +If you need to process the alpha channel on the image separately from the image +data (for example if you convert it to a bitmap mask) it is possible to have +libpng strip the channel leaving just RGB or gray data: + + if (color_type & PNG_COLOR_MASK_ALPHA) + png_set_strip_alpha(png_ptr); + +If you strip the alpha channel you need to find some other way of dealing with +the information. If, instead, you want to convert the image to an opaque +version with no alpha channel use png_set_background; see below. + +As of libpng version 1.5.2, almost all useful expansions are supported, the +major ommissions are conversion of grayscale to indexed images (which can be +done trivially in the application) and conversion of indexed to grayscale (which +can be done by a trivial manipulation of the palette.) + +In the following table, the 01 means grayscale with depth<8, 31 means +indexed with depth<8, other numerals represent the color type, "T" means +the tRNS chunk is present, A means an alpha channel is present, and O +means tRNS or alpha is present but all pixels in the image are opaque. + + FROM 01 31 0 0T 0O 2 2T 2O 3 3T 3O 4A 4O 6A 6O + TO + 01 - [G] - - - - - - - - - - - - - + 31 [Q] Q [Q] [Q] [Q] Q Q Q Q Q Q [Q] [Q] Q Q + 0 1 G + . . G G G G G G B B GB GB + 0T lt Gt t + . Gt G G Gt G G Bt Bt GBt GBt + 0O lt Gt t . + Gt Gt G Gt Gt G Bt Bt GBt GBt + 2 C P C C C + . . C - - CB CB B B + 2T Ct - Ct C C t + t - - - CBt CBt Bt Bt + 2O Ct - Ct C C t t + - - - CBt CBt Bt Bt + 3 [Q] p [Q] [Q] [Q] Q Q Q + . . [Q] [Q] Q Q + 3T [Qt] p [Qt][Q] [Q] Qt Qt Qt t + t [Qt][Qt] Qt Qt + 3O [Qt] p [Qt][Q] [Q] Qt Qt Qt t t + [Qt][Qt] Qt Qt + 4A lA G A T T GA GT GT GA GT GT + BA G GBA + 4O lA GBA A T T GA GT GT GA GT GT BA + GBA G + 6A CA PA CA C C A T tT PA P P C CBA + BA + 6O CA PBA CA C C A tT T PA P P CBA C BA + + +Within the matrix, + "+" identifies entries where 'from' and 'to' are the same. + "-" means the transformation is not supported. + "." means nothing is necessary (a tRNS chunk can just be ignored). + "t" means the transformation is obtained by png_set_tRNS. + "A" means the transformation is obtained by png_set_add_alpha(). + "X" means the transformation is obtained by png_set_expand(). + "1" means the transformation is obtained by + png_set_expand_gray_1_2_4_to_8() (and by png_set_expand() + if there is no transparency in the original or the final + format). + "C" means the transformation is obtained by png_set_gray_to_rgb(). + "G" means the transformation is obtained by png_set_rgb_to_gray(). + "P" means the transformation is obtained by + png_set_expand_palette_to_rgb(). + "p" means the transformation is obtained by png_set_packing(). + "Q" means the transformation is obtained by png_set_quantize(). + "T" means the transformation is obtained by + png_set_tRNS_to_alpha(). + "B" means the transformation is obtained by + png_set_background(), or png_strip_alpha(). + +When an entry has multiple transforms listed all are required to cause the +right overall transformation. When two transforms are separated by a comma +either will do the job. When transforms are enclosed in [] the transform should +do the job but this is currently unimplemented - a different format will result +if the suggested transformations are used. + +In PNG files, the alpha channel in an image +is the level of opacity. If you need the alpha channel in an image to +be the level of transparency instead of opacity, you can invert the +alpha channel (or the tRNS chunk data) after it's read, so that 0 is +fully opaque and 255 (in 8-bit or paletted images) or 65535 (in 16-bit +images) is fully transparent, with + + png_set_invert_alpha(png_ptr); + +PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as +they can, resulting in, for example, 8 pixels per byte for 1 bit +files. This code expands to 1 pixel per byte without changing the +values of the pixels: + + if (bit_depth < 8) + png_set_packing(png_ptr); + +PNG files have possible bit depths of 1, 2, 4, 8, and 16. All pixels +stored in a PNG image have been "scaled" or "shifted" up to the next +higher possible bit depth (e.g. from 5 bits/sample in the range [0,31] +to 8 bits/sample in the range [0, 255]). However, it is also possible +to convert the PNG pixel data back to the original bit depth of the +image. This call reduces the pixels back down to the original bit depth: + + png_color_8p sig_bit; + + if (png_get_sBIT(png_ptr, info_ptr, &sig_bit)) + png_set_shift(png_ptr, sig_bit); + +PNG files store 3-color pixels in red, green, blue order. This code +changes the storage of the pixels to blue, green, red: + + if (color_type == PNG_COLOR_TYPE_RGB || + color_type == PNG_COLOR_TYPE_RGB_ALPHA) + png_set_bgr(png_ptr); + +PNG files store RGB pixels packed into 3 or 6 bytes. This code expands them +into 4 or 8 bytes for windowing systems that need them in this format: + + if (color_type == PNG_COLOR_TYPE_RGB) + png_set_filler(png_ptr, filler, PNG_FILLER_BEFORE); + +where "filler" is the 8 or 16-bit number to fill with, and the location is +either PNG_FILLER_BEFORE or PNG_FILLER_AFTER, depending upon whether +you want the filler before the RGB or after. This transformation +does not affect images that already have full alpha channels. To add an +opaque alpha channel, use filler=0xff or 0xffff and PNG_FILLER_AFTER which +will generate RGBA pixels. + +Note that png_set_filler() does not change the color type. If you want +to do that, you can add a true alpha channel with + + if (color_type == PNG_COLOR_TYPE_RGB || + color_type == PNG_COLOR_TYPE_GRAY) + png_set_add_alpha(png_ptr, filler, PNG_FILLER_AFTER); + +where "filler" contains the alpha value to assign to each pixel. +This function was added in libpng-1.2.7. + +If you are reading an image with an alpha channel, and you need the +data as ARGB instead of the normal PNG format RGBA: + + if (color_type == PNG_COLOR_TYPE_RGB_ALPHA) + png_set_swap_alpha(png_ptr); + +For some uses, you may want a grayscale image to be represented as +RGB. This code will do that conversion: + + if (color_type == PNG_COLOR_TYPE_GRAY || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_gray_to_rgb(png_ptr); + +Conversely, you can convert an RGB or RGBA image to grayscale or grayscale +with alpha. + + if (color_type == PNG_COLOR_TYPE_RGB || + color_type == PNG_COLOR_TYPE_RGB_ALPHA) + png_set_rgb_to_gray(png_ptr, error_action, + double red_weight, double green_weight); + + error_action = 1: silently do the conversion + + error_action = 2: issue a warning if the original + image has any pixel where + red != green or red != blue + + error_action = 3: issue an error and abort the + conversion if the original + image has any pixel where + red != green or red != blue + + red_weight: weight of red component + + green_weight: weight of green component + If either weight is negative, default + weights are used. + +In the corresponding fixed point API the red_weight and green_weight values are +simply scaled by 100,000: + + png_set_rgb_to_gray(png_ptr, error_action, + png_fixed_point red_weight, + png_fixed_point green_weight); + +If you have set error_action = 1 or 2, you can +later check whether the image really was gray, after processing +the image rows, with the png_get_rgb_to_gray_status(png_ptr) function. +It will return a png_byte that is zero if the image was gray or +1 if there were any non-gray pixels. Background and sBIT data +will be silently converted to grayscale, using the green channel +data for sBIT, regardless of the error_action setting. + +The default values come from the PNG file cHRM chunk if present; otherwise, the +defaults correspond to the ITU-R recommendation 709, and also the sRGB color +space, as recommended in the Charles Poynton's Colour FAQ, +, in section 9: + + + + Y = 0.2126 * R + 0.7152 * G + 0.0722 * B + +Previous versions of this document, 1998 through 2002, recommended a slightly +different formula: + + Y = 0.212671 * R + 0.715160 * G + 0.072169 * B + +Libpng uses an integer approximation: + + Y = (6968 * R + 23434 * G + 2366 * B)/32768 + +The calculation is done in a linear colorspace, if the image gamma +can be determined. + +The png_set_background() function has been described already; it tells libpng to +composite images with alpha or simple transparency against the supplied +background color. For compatibility with versions of libpng earlier than +libpng-1.5.4 it is recommended that you call the function after reading the file +header, even if you don't want to use the color in a bKGD chunk, if one exists. + +If the PNG file contains a bKGD chunk (PNG_INFO_bKGD valid), +you may use this color, or supply another color more suitable for +the current display (e.g., the background color from a web page). You +need to tell libpng how the color is represented, both the format of the +component values in the color (the number of bits) and the gamma encoding of the +color. The function takes two arguments, background_gamma_mode and need_expand +to convey this information; however, only two combinations are likely to be +useful: + + png_color_16 my_background; + png_color_16p image_background; + + if (png_get_bKGD(png_ptr, info_ptr, &image_background)) + png_set_background(png_ptr, image_background, + PNG_BACKGROUND_GAMMA_FILE, 1/*needs to be expanded*/, 1); + else + png_set_background(png_ptr, &my_background, + PNG_BACKGROUND_GAMMA_SCREEN, 0/*do not expand*/, 1); + +The second call was described above - my_background is in the format of the +final, display, output produced by libpng. Because you now know the format of +the PNG it is possible to avoid the need to choose either 8-bit or 16-bit +output and to retain palette images (the palette colors will be modified +appropriately and the tRNS chunk removed.) However, if you are doing this, +take great care not to ask for transformations without checking first that +they apply! + +In the first call the background color has the original bit depth and color type +of the PNG file. So, for palette images the color is supplied as a palette +index and for low bit greyscale images the color is a reduced bit value in +image_background->gray. + +If you didn't call png_set_gamma() before reading the file header, for example +if you need your code to remain compatible with older versions of libpng prior +to libpng-1.5.4, this is the place to call it. + +Do not call it if you called png_set_alpha_mode(); doing so will damage the +settings put in place by png_set_alpha_mode(). (If png_set_alpha_mode() is +supported then you can certainly do png_set_gamma() before reading the PNG +header.) + +This API unconditionally sets the screen and file gamma values, so it will +override the value in the PNG file unless it is called before the PNG file +reading starts. For this reason you must always call it with the PNG file +value when you call it in this position: + + if (png_get_gAMA(png_ptr, info_ptr, &file_gamma)) + png_set_gamma(png_ptr, screen_gamma, file_gamma); + + else + png_set_gamma(png_ptr, screen_gamma, 0.45455); + +If you need to reduce an RGB file to a paletted file, or if a paletted +file has more entries then will fit on your screen, png_set_quantize() +will do that. Note that this is a simple match quantization that merely +finds the closest color available. This should work fairly well with +optimized palettes, but fairly badly with linear color cubes. If you +pass a palette that is larger than maximum_colors, the file will +reduce the number of colors in the palette so it will fit into +maximum_colors. If there is a histogram, libpng will use it to make +more intelligent choices when reducing the palette. If there is no +histogram, it may not do as good a job. + + if (color_type & PNG_COLOR_MASK_COLOR) + { + if (png_get_valid(png_ptr, info_ptr, + PNG_INFO_PLTE)) + { + png_uint_16p histogram = NULL; + + png_get_hIST(png_ptr, info_ptr, + &histogram); + png_set_quantize(png_ptr, palette, num_palette, + max_screen_colors, histogram, 1); + } + + else + { + png_color std_color_cube[MAX_SCREEN_COLORS] = + { ... colors ... }; + + png_set_quantize(png_ptr, std_color_cube, + MAX_SCREEN_COLORS, MAX_SCREEN_COLORS, + NULL,0); + } + } + +PNG files describe monochrome as black being zero and white being one. +The following code will reverse this (make black be one and white be +zero): + + if (bit_depth == 1 && color_type == PNG_COLOR_TYPE_GRAY) + png_set_invert_mono(png_ptr); + +This function can also be used to invert grayscale and gray-alpha images: + + if (color_type == PNG_COLOR_TYPE_GRAY || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_invert_mono(png_ptr); + +PNG files store 16-bit pixels in network byte order (big-endian, +ie. most significant bits first). This code changes the storage to the +other way (little-endian, i.e. least significant bits first, the +way PCs store them): + + if (bit_depth == 16) + png_set_swap(png_ptr); + +If you are using packed-pixel images (1, 2, or 4 bits/pixel), and you +need to change the order the pixels are packed into bytes, you can use: + + if (bit_depth < 8) + png_set_packswap(png_ptr); + +Finally, you can write your own transformation function if none of +the existing ones meets your needs. This is done by setting a callback +with + + png_set_read_user_transform_fn(png_ptr, + read_transform_fn); + +You must supply the function + + void read_transform_fn(png_structp png_ptr, png_row_infop + row_info, png_bytep data) + +See pngtest.c for a working example. Your function will be called +after all of the other transformations have been processed. Take care with +interlaced images if you do the interlace yourself - the width of the row is the +width in 'row_info', not the overall image width. + +If supported, libpng provides two information routines that you can use to find +where you are in processing the image: + + png_get_current_pass_number(png_structp png_ptr); + png_get_current_row_number(png_structp png_ptr); + +Don't try using these outside a transform callback - firstly they are only +supported if user transforms are supported, secondly they may well return +unexpected results unless the row is actually being processed at the moment they +are called. + +With interlaced +images the value returned is the row in the input sub-image image. Use +PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to +find the output pixel (x,y) given an interlaced sub-image pixel (row,col,pass). + +The discussion of interlace handling above contains more information on how to +use these values. + +You can also set up a pointer to a user structure for use by your +callback function, and you can inform libpng that your transform +function will change the number of channels or bit depth with the +function + + png_set_user_transform_info(png_ptr, user_ptr, + user_depth, user_channels); + +The user's application, not libpng, is responsible for allocating and +freeing any memory required for the user structure. + +You can retrieve the pointer via the function +png_get_user_transform_ptr(). For example: + + voidp read_user_transform_ptr = + png_get_user_transform_ptr(png_ptr); + +The last thing to handle is interlacing; this is covered in detail below, +but you must call the function here if you want libpng to handle expansion +of the interlaced image. + + number_of_passes = png_set_interlace_handling(png_ptr); + +After setting the transformations, libpng can update your png_info +structure to reflect any transformations you've requested with this +call. + + png_read_update_info(png_ptr, info_ptr); + +This is most useful to update the info structure's rowbytes +field so you can use it to allocate your image memory. This function +will also update your palette with the correct screen_gamma and +background if these have been given with the calls above. You may +only call png_read_update_info() once with a particular info_ptr. + +After you call png_read_update_info(), you can allocate any +memory you need to hold the image. The row data is simply +raw byte data for all forms of images. As the actual allocation +varies among applications, no example will be given. If you +are allocating one large chunk, you will need to build an +array of pointers to each row, as it will be needed for some +of the functions below. + +Remember: Before you call png_read_update_info(), the png_get_*() +functions return the values corresponding to the original PNG image. +After you call png_read_update_info the values refer to the image +that libpng will output. Consequently you must call all the png_set_ +functions before you call png_read_update_info(). This is particularly +important for png_set_interlace_handling() - if you are going to call +png_read_update_info() you must call png_set_interlace_handling() before +it unless you want to receive interlaced output. + +.SS Reading image data + +After you've allocated memory, you can read the image data. +The simplest way to do this is in one function call. If you are +allocating enough memory to hold the whole image, you can just +call png_read_image() and libpng will read in all the image data +and put it in the memory area supplied. You will need to pass in +an array of pointers to each row. + +This function automatically handles interlacing, so you don't +need to call png_set_interlace_handling() (unless you call +png_read_update_info()) or call this function multiple times, or any +of that other stuff necessary with png_read_rows(). + + png_read_image(png_ptr, row_pointers); + +where row_pointers is: + + png_bytep row_pointers[height]; + +You can point to void or char or whatever you use for pixels. + +If you don't want to read in the whole image at once, you can +use png_read_rows() instead. If there is no interlacing (check +interlace_type == PNG_INTERLACE_NONE), this is simple: + + png_read_rows(png_ptr, row_pointers, NULL, + number_of_rows); + +where row_pointers is the same as in the png_read_image() call. + +If you are doing this just one row at a time, you can do this with +a single row_pointer instead of an array of row_pointers: + + png_bytep row_pointer = row; + png_read_row(png_ptr, row_pointer, NULL); + +If the file is interlaced (interlace_type != 0 in the IHDR chunk), things +get somewhat harder. The only current (PNG Specification version 1.2) +interlacing type for PNG is (interlace_type == PNG_INTERLACE_ADAM7); +a somewhat complicated 2D interlace scheme, known as Adam7, that +breaks down an image into seven smaller images of varying size, based +on an 8x8 grid. This number is defined (from libpng 1.5) as +PNG_INTERLACE_ADAM7_PASSES in png.h + +libpng can fill out those images or it can give them to you "as is". +It is almost always better to have libpng handle the interlacing for you. +If you want the images filled out, there are two ways to do that. The one +mentioned in the PNG specification is to expand each pixel to cover +those pixels that have not been read yet (the "rectangle" method). +This results in a blocky image for the first pass, which gradually +smooths out as more pixels are read. The other method is the "sparkle" +method, where pixels are drawn only in their final locations, with the +rest of the image remaining whatever colors they were initialized to +before the start of the read. The first method usually looks better, +but tends to be slower, as there are more pixels to put in the rows. + +If, as is likely, you want libpng to expand the images, call this before +calling png_start_read_image() or png_read_update_info(): + + if (interlace_type == PNG_INTERLACE_ADAM7) + number_of_passes + = png_set_interlace_handling(png_ptr); + +This will return the number of passes needed. Currently, this is seven, +but may change if another interlace type is added. This function can be +called even if the file is not interlaced, where it will return one pass. +You then need to read the whole image 'number_of_passes' times. Each time +will distribute the pixels from the current pass to the correct place in +the output image, so you need to supply the same rows to png_read_rows in +each pass. + +If you are not going to display the image after each pass, but are +going to wait until the entire image is read in, use the sparkle +effect. This effect is faster and the end result of either method +is exactly the same. If you are planning on displaying the image +after each pass, the "rectangle" effect is generally considered the +better looking one. + +If you only want the "sparkle" effect, just call png_read_rows() as +normal, with the third parameter NULL. Make sure you make pass over +the image number_of_passes times, and you don't change the data in the +rows between calls. You can change the locations of the data, just +not the data. Each pass only writes the pixels appropriate for that +pass, and assumes the data from previous passes is still valid. + + png_read_rows(png_ptr, row_pointers, NULL, + number_of_rows); + +If you only want the first effect (the rectangles), do the same as +before except pass the row buffer in the third parameter, and leave +the second parameter NULL. + + png_read_rows(png_ptr, NULL, row_pointers, + number_of_rows); + +If you don't want libpng to handle the interlacing details, just call +png_read_rows() PNG_INTERLACE_ADAM7_PASSES times to read in all the images. +Each of the images is a valid image by itself; however, you will almost +certainly need to distribute the pixels from each sub-image to the +correct place. This is where everything gets very tricky. + +If you want to retrieve the separate images you must pass the correct +number of rows to each successive call of png_read_rows(). The calculation +gets pretty complicated for small images, where some sub-images may +not even exist because either their width or height ends up zero. +libpng provides two macros to help you in 1.5 and later versions: + + png_uint_32 width = PNG_PASS_COLS(image_width, pass_number); + png_uint_32 height = PNG_PASS_ROWS(image_height, pass_number); + +Respectively these tell you the width and height of the sub-image +corresponding to the numbered pass. 'pass' is in in the range 0 to 6 - +this can be confusing because the specification refers to the same passes +as 1 to 7! Be careful, you must check both the width and height before +calling png_read_rows() and not call it for that pass if either is zero. + +You can, of course, read each sub-image row by row. If you want to +produce optimal code to make a pixel-by-pixel transformation of an +interlaced image this is the best approach; read each row of each pass, +transform it, and write it out to a new interlaced image. + +If you want to de-interlace the image yourself libpng provides further +macros to help that tell you where to place the pixels in the output image. +Because the interlacing scheme is rectangular - sub-image pixels are always +arranged on a rectangular grid - all you need to know for each pass is the +starting column and row in the output image of the first pixel plus the +spacing between each pixel. As of libpng 1.5 there are four macros to +retrieve this information: + + png_uint_32 x = PNG_PASS_START_COL(pass); + png_uint_32 y = PNG_PASS_START_ROW(pass); + png_uint_32 xStep = 1U << PNG_PASS_COL_SHIFT(pass); + png_uint_32 yStep = 1U << PNG_PASS_ROW_SHIFT(pass); + +These allow you to write the obvious loop: + + png_uint_32 input_y = 0; + png_uint_32 output_y = PNG_PASS_START_ROW(pass); + + while (output_y < output_image_height) + { + png_uint_32 input_x = 0; + png_uint_32 output_x = PNG_PASS_START_COL(pass); + + while (output_x < output_image_width) + { + image[output_y][output_x] = + subimage[pass][input_y][input_x++]; + + output_x += xStep; + } + + ++input_y; + output_y += yStep; + } + +Notice that the steps between successive output rows and columns are +returned as shifts. This is possible because the pixels in the subimages +are always a power of 2 apart - 1, 2, 4 or 8 pixels - in the original +image. In practice you may need to directly calculate the output coordinate +given an input coordinate. libpng provides two further macros for this +purpose: + + png_uint_32 output_x = PNG_COL_FROM_PASS_COL(input_x, pass); + png_uint_32 output_y = PNG_ROW_FROM_PASS_ROW(input_y, pass); + +Finally a pair of macros are provided to tell you if a particular image +row or column appears in a given pass: + + int col_in_pass = PNG_COL_IN_INTERLACE_PASS(output_x, pass); + int row_in_pass = PNG_ROW_IN_INTERLACE_PASS(output_y, pass); + +Bear in mind that you will probably also need to check the width and height +of the pass in addition to the above to be sure the pass even exists! + +With any luck you are convinced by now that you don't want to do your own +interlace handling. In reality normally the only good reason for doing this +is if you are processing PNG files on a pixel-by-pixel basis and don't want +to load the whole file into memory when it is interlaced. + +libpng includes a test program, pngvalid, that illustrates reading and +writing of interlaced images. If you can't get interlacing to work in your +code and don't want to leave it to libpng (the recommended approach), see +how pngvalid.c does it. + +.SS Finishing a sequential read + +After you are finished reading the image through the +low-level interface, you can finish reading the file. If you are +interested in comments or time, which may be stored either before or +after the image data, you should pass the separate png_info struct if +you want to keep the comments from before and after the image +separate. + + png_infop end_info = png_create_info_struct(png_ptr); + + if (!end_info) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + (png_infopp)NULL); + return (ERROR); + } + + png_read_end(png_ptr, end_info); + +If you are not interested, you should still call png_read_end() +but you can pass NULL, avoiding the need to create an end_info structure. + + png_read_end(png_ptr, (png_infop)NULL); + +If you don't call png_read_end(), then your file pointer will be +left pointing to the first chunk after the last IDAT, which is probably +not what you want if you expect to read something beyond the end of +the PNG datastream. + +When you are done, you can free all memory allocated by libpng like this: + + png_destroy_read_struct(&png_ptr, &info_ptr, + &end_info); + +or, if you didn't create an end_info structure, + + png_destroy_read_struct(&png_ptr, &info_ptr, + (png_infopp)NULL); + +It is also possible to individually free the info_ptr members that +point to libpng-allocated storage with the following function: + + png_free_data(png_ptr, info_ptr, mask, seq) + + mask - identifies data to be freed, a mask + containing the bitwise OR of one or + more of + PNG_FREE_PLTE, PNG_FREE_TRNS, + PNG_FREE_HIST, PNG_FREE_ICCP, + PNG_FREE_PCAL, PNG_FREE_ROWS, + PNG_FREE_SCAL, PNG_FREE_SPLT, + PNG_FREE_TEXT, PNG_FREE_UNKN, + or simply PNG_FREE_ALL + + seq - sequence number of item to be freed + (-1 for all items) + +This function may be safely called when the relevant storage has +already been freed, or has not yet been allocated, or was allocated +by the user and not by libpng, and will in those cases do nothing. +The "seq" parameter is ignored if only one item of the selected data +type, such as PLTE, is allowed. If "seq" is not -1, and multiple items +are allowed for the data type identified in the mask, such as text or +sPLT, only the n'th item in the structure is freed, where n is "seq". + +The default behavior is only to free data that was allocated internally +by libpng. This can be changed, so that libpng will not free the data, +or so that it will free data that was allocated by the user with png_malloc() +or png_calloc() and passed in via a png_set_*() function, with + + png_data_freer(png_ptr, info_ptr, freer, mask) + + freer - one of + PNG_DESTROY_WILL_FREE_DATA + PNG_SET_WILL_FREE_DATA + PNG_USER_WILL_FREE_DATA + + mask - which data elements are affected + same choices as in png_free_data() + +This function only affects data that has already been allocated. +You can call this function after reading the PNG data but before calling +any png_set_*() functions, to control whether the user or the png_set_*() +function is responsible for freeing any existing data that might be present, +and again after the png_set_*() functions to control whether the user +or png_destroy_*() is supposed to free the data. When the user assumes +responsibility for libpng-allocated data, the application must use +png_free() to free it, and when the user transfers responsibility to libpng +for data that the user has allocated, the user must have used png_malloc() +or png_calloc() to allocate it. + +If you allocated your row_pointers in a single block, as suggested above in +the description of the high level read interface, you must not transfer +responsibility for freeing it to the png_set_rows or png_read_destroy function, +because they would also try to free the individual row_pointers[i]. + +If you allocated text_ptr.text, text_ptr.lang, and text_ptr.translated_keyword +separately, do not transfer responsibility for freeing text_ptr to libpng, +because when libpng fills a png_text structure it combines these members with +the key member, and png_free_data() will free only text_ptr.key. Similarly, +if you transfer responsibility for free'ing text_ptr from libpng to your +application, your application must not separately free those members. + +The png_free_data() function will turn off the "valid" flag for anything +it frees. If you need to turn the flag off for a chunk that was freed by +your application instead of by libpng, you can use + + png_set_invalid(png_ptr, info_ptr, mask); + + mask - identifies the chunks to be made invalid, + containing the bitwise OR of one or + more of + PNG_INFO_gAMA, PNG_INFO_sBIT, + PNG_INFO_cHRM, PNG_INFO_PLTE, + PNG_INFO_tRNS, PNG_INFO_bKGD, + PNG_INFO_hIST, PNG_INFO_pHYs, + PNG_INFO_oFFs, PNG_INFO_tIME, + PNG_INFO_pCAL, PNG_INFO_sRGB, + PNG_INFO_iCCP, PNG_INFO_sPLT, + PNG_INFO_sCAL, PNG_INFO_IDAT + +For a more compact example of reading a PNG image, see the file example.c. + +.SS Reading PNG files progressively + +The progressive reader is slightly different then the non-progressive +reader. Instead of calling png_read_info(), png_read_rows(), and +png_read_end(), you make one call to png_process_data(), which calls +callbacks when it has the info, a row, or the end of the image. You +set up these callbacks with png_set_progressive_read_fn(). You don't +have to worry about the input/output functions of libpng, as you are +giving the library the data directly in png_process_data(). I will +assume that you have read the section on reading PNG files above, +so I will only highlight the differences (although I will show +all of the code). + +png_structp png_ptr; +png_infop info_ptr; + + /* An example code fragment of how you would + initialize the progressive reader in your + application. */ + int + initialize_png_reader() + { + png_ptr = png_create_read_struct + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn); + + if (!png_ptr) + return (ERROR); + + info_ptr = png_create_info_struct(png_ptr); + + if (!info_ptr) + { + png_destroy_read_struct(&png_ptr, + (png_infopp)NULL, (png_infopp)NULL); + return (ERROR); + } + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + (png_infopp)NULL); + return (ERROR); + } + + /* This one's new. You can provide functions + to be called when the header info is valid, + when each row is completed, and when the image + is finished. If you aren't using all functions, + you can specify NULL parameters. Even when all + three functions are NULL, you need to call + png_set_progressive_read_fn(). You can use + any struct as the user_ptr (cast to a void pointer + for the function call), and retrieve the pointer + from inside the callbacks using the function + + png_get_progressive_ptr(png_ptr); + + which will return a void pointer, which you have + to cast appropriately. + */ + png_set_progressive_read_fn(png_ptr, (void *)user_ptr, + info_callback, row_callback, end_callback); + + return 0; + } + + /* A code fragment that you call as you receive blocks + of data */ + int + process_data(png_bytep buffer, png_uint_32 length) + { + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + (png_infopp)NULL); + return (ERROR); + } + + /* This one's new also. Simply give it a chunk + of data from the file stream (in order, of + course). On machines with segmented memory + models machines, don't give it any more than + 64K. The library seems to run fine with sizes + of 4K. Although you can give it much less if + necessary (I assume you can give it chunks of + 1 byte, I haven't tried less then 256 bytes + yet). When this function returns, you may + want to display any rows that were generated + in the row callback if you don't already do + so there. + */ + png_process_data(png_ptr, info_ptr, buffer, length); + + /* At this point you can call png_process_data_skip if + you want to handle data the library will skip yourself; + it simply returns the number of bytes to skip (and stops + libpng skipping that number of bytes on the next + png_process_data call). + return 0; + } + + /* This function is called (as set by + png_set_progressive_read_fn() above) when enough data + has been supplied so all of the header has been + read. + */ + void + info_callback(png_structp png_ptr, png_infop info) + { + /* Do any setup here, including setting any of + the transformations mentioned in the Reading + PNG files section. For now, you _must_ call + either png_start_read_image() or + png_read_update_info() after all the + transformations are set (even if you don't set + any). You may start getting rows before + png_process_data() returns, so this is your + last chance to prepare for that. + + This is where you turn on interlace handling, + assuming you don't want to do it yourself. + + If you need to you can stop the processing of + your original input data at this point by calling + png_process_data_pause. This returns the number + of unprocessed bytes from the last png_process_data + call - it is up to you to ensure that the next call + sees these bytes again. If you don't want to bother + with this you can get libpng to cache the unread + bytes by setting the 'save' parameter (see png.h) but + then libpng will have to copy the data internally. + */ + } + + /* This function is called when each row of image + data is complete */ + void + row_callback(png_structp png_ptr, png_bytep new_row, + png_uint_32 row_num, int pass) + { + /* If the image is interlaced, and you turned + on the interlace handler, this function will + be called for every row in every pass. Some + of these rows will not be changed from the + previous pass. When the row is not changed, + the new_row variable will be NULL. The rows + and passes are called in order, so you don't + really need the row_num and pass, but I'm + supplying them because it may make your life + easier. + + If you did not turn on interlace handling then + the callback is called for each row of each + sub-image when the image is interlaced. In this + case 'row_num' is the row in the sub-image, not + the row in the output image as it is in all other + cases. + + For the non-NULL rows of interlaced images when + you have switched on libpng interlace handling, + you must call png_progressive_combine_row() + passing in the row and the old row. You can + call this function for NULL rows (it will just + return) and for non-interlaced images (it just + does the memcpy for you) if it will make the + code easier. Thus, you can just do this for + all cases if you switch on interlace handling; + */ + + png_progressive_combine_row(png_ptr, old_row, + new_row); + + /* where old_row is what was displayed for + previously for the row. Note that the first + pass (pass == 0, really) will completely cover + the old row, so the rows do not have to be + initialized. After the first pass (and only + for interlaced images), you will have to pass + the current row, and the function will combine + the old row and the new row. + + You can also call png_process_data_pause in this + callback - see above. + */ + } + + void + end_callback(png_structp png_ptr, png_infop info) + { + /* This function is called after the whole image + has been read, including any chunks after the + image (up to and including the IEND). You + will usually have the same info chunk as you + had in the header, although some data may have + been added to the comments and time fields. + + Most people won't do much here, perhaps setting + a flag that marks the image as finished. + */ + } + + + +.SH IV. Writing + +Much of this is very similar to reading. However, everything of +importance is repeated here, so you won't have to constantly look +back up in the reading section to understand writing. + +.SS Setup + +You will want to do the I/O initialization before you get into libpng, +so if it doesn't work, you don't have anything to undo. If you are not +using the standard I/O functions, you will need to replace them with +custom writing functions. See the discussion under Customizing libpng. + + FILE *fp = fopen(file_name, "wb"); + + if (!fp) + return (ERROR); + +Next, png_struct and png_info need to be allocated and initialized. +As these can be both relatively large, you may not want to store these +on the stack, unless you have stack space to spare. Of course, you +will want to check if they return NULL. If you are also reading, +you won't want to name your read structure and your write structure +both "png_ptr"; you can call them anything you like, such as +"read_ptr" and "write_ptr". Look at pngtest.c, for example. + + png_structp png_ptr = png_create_write_struct + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn); + + if (!png_ptr) + return (ERROR); + + png_infop info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) + { + png_destroy_write_struct(&png_ptr, + (png_infopp)NULL); + return (ERROR); + } + +If you want to use your own memory allocation routines, +define PNG_USER_MEM_SUPPORTED and use +png_create_write_struct_2() instead of png_create_write_struct(): + + png_structp png_ptr = png_create_write_struct_2 + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn, (png_voidp) + user_mem_ptr, user_malloc_fn, user_free_fn); + +After you have these structures, you will need to set up the +error handling. When libpng encounters an error, it expects to +longjmp() back to your routine. Therefore, you will need to call +setjmp() and pass the png_jmpbuf(png_ptr). If you +write the file from different routines, you will need to update +the png_jmpbuf(png_ptr) every time you enter a new routine that will +call a png_*() function. See your documentation of setjmp/longjmp +for your compiler for more information on setjmp/longjmp. See +the discussion on libpng error handling in the Customizing Libpng +section below for more information on the libpng error handling. + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_write_struct(&png_ptr, &info_ptr); + fclose(fp); + return (ERROR); + } + ... + return; + +If you would rather avoid the complexity of setjmp/longjmp issues, +you can compile libpng with PNG_NO_SETJMP, in which case +errors will result in a call to PNG_ABORT() which defaults to abort(). + +You can #define PNG_ABORT() to a function that does something +more useful than abort(), as long as your function does not +return. + +Checking for invalid palette index on write was added at libpng +1.5.10. If a pixel contains an invalid (out-of-range) index libpng issues +a benign error. This is enabled by default because this condition is an +error according to the PNG specification, Clause 11.3.2, but the error can +be ignored in each png_ptr with + + png_set_check_for_invalid_index(png_ptr, 0); + +If the error is ignored, or if png_benign_error() treats it as a warning, +any invalid pixels are written as-is by the encoder, resulting in an +invalid PNG datastream as output. In this case the application is +responsible for ensuring that the pixel indexes are in range when it writes +a PLTE chunk with fewer entries than the bit depth would allow. + +Now you need to set up the output code. The default for libpng is to +use the C function fwrite(). If you use this, you will need to pass a +valid FILE * in the function png_init_io(). Be sure that the file is +opened in binary mode. Again, if you wish to handle writing data in +another way, see the discussion on libpng I/O handling in the Customizing +Libpng section below. + + png_init_io(png_ptr, fp); + +If you are embedding your PNG into a datastream such as MNG, and don't +want libpng to write the 8-byte signature, or if you have already +written the signature in your application, use + + png_set_sig_bytes(png_ptr, 8); + +to inform libpng that it should not write a signature. + +.SS Write callbacks + +At this point, you can set up a callback function that will be +called after each row has been written, which you can use to control +a progress meter or the like. It's demonstrated in pngtest.c. +You must supply a function + + void write_row_callback(png_structp png_ptr, png_uint_32 row, + int pass); + { + /* put your code here */ + } + +(You can give it another name that you like instead of "write_row_callback") + +To inform libpng about your function, use + + png_set_write_status_fn(png_ptr, write_row_callback); + +When this function is called the row has already been completely processed and +it has also been written out. The 'row' and 'pass' refer to the next row to be +handled. For the +non-interlaced case the row that was just handled is simply one less than the +passed in row number, and pass will always be 0. For the interlaced case the +same applies unless the row value is 0, in which case the row just handled was +the last one from one of the preceding passes. Because interlacing may skip a +pass you cannot be sure that the preceding pass is just 'pass-1', if you really +need to know what the last pass is record (row,pass) from the callback and use +the last recorded value each time. + +As with the user transform you can find the output row using the +PNG_ROW_FROM_PASS_ROW macro. + +You now have the option of modifying how the compression library will +run. The following functions are mainly for testing, but may be useful +in some cases, like if you need to write PNG files extremely fast and +are willing to give up some compression, or if you want to get the +maximum possible compression at the expense of slower writing. If you +have no special needs in this area, let the library do what it wants by +not calling this function at all, as it has been tuned to deliver a good +speed/compression ratio. The second parameter to png_set_filter() is +the filter method, for which the only valid values are 0 (as of the +July 1999 PNG specification, version 1.2) or 64 (if you are writing +a PNG datastream that is to be embedded in a MNG datastream). The third +parameter is a flag that indicates which filter type(s) are to be tested +for each scanline. See the PNG specification for details on the specific +filter types. + + + /* turn on or off filtering, and/or choose + specific filters. You can use either a single + PNG_FILTER_VALUE_NAME or the bitwise OR of one + or more PNG_FILTER_NAME masks. + */ + png_set_filter(png_ptr, 0, + PNG_FILTER_NONE | PNG_FILTER_VALUE_NONE | + PNG_FILTER_SUB | PNG_FILTER_VALUE_SUB | + PNG_FILTER_UP | PNG_FILTER_VALUE_UP | + PNG_FILTER_AVG | PNG_FILTER_VALUE_AVG | + PNG_FILTER_PAETH | PNG_FILTER_VALUE_PAETH| + PNG_ALL_FILTERS); + +If an application wants to start and stop using particular filters during +compression, it should start out with all of the filters (to ensure that +the previous row of pixels will be stored in case it's needed later), +and then add and remove them after the start of compression. + +If you are writing a PNG datastream that is to be embedded in a MNG +datastream, the second parameter can be either 0 or 64. + +The png_set_compression_*() functions interface to the zlib compression +library, and should mostly be ignored unless you really know what you are +doing. The only generally useful call is png_set_compression_level() +which changes how much time zlib spends on trying to compress the image +data. See the Compression Library (zlib.h and algorithm.txt, distributed +with zlib) for details on the compression levels. + + #include zlib.h + + /* Set the zlib compression level */ + png_set_compression_level(png_ptr, + Z_BEST_COMPRESSION); + + /* Set other zlib parameters for compressing IDAT */ + png_set_compression_mem_level(png_ptr, 8); + png_set_compression_strategy(png_ptr, + Z_DEFAULT_STRATEGY); + png_set_compression_window_bits(png_ptr, 15); + png_set_compression_method(png_ptr, 8); + png_set_compression_buffer_size(png_ptr, 8192) + + /* Set zlib parameters for text compression + * If you don't call these, the parameters + * fall back on those defined for IDAT chunks + */ + png_set_text_compression_mem_level(png_ptr, 8); + png_set_text_compression_strategy(png_ptr, + Z_DEFAULT_STRATEGY); + png_set_text_compression_window_bits(png_ptr, 15); + png_set_text_compression_method(png_ptr, 8); + +.SS Setting the contents of info for output + +You now need to fill in the png_info structure with all the data you +wish to write before the actual image. Note that the only thing you +are allowed to write after the image is the text chunks and the time +chunk (as of PNG Specification 1.2, anyway). See png_write_end() and +the latest PNG specification for more information on that. If you +wish to write them before the image, fill them in now, and flag that +data as being valid. If you want to wait until after the data, don't +fill them until png_write_end(). For all the fields in png_info and +their data types, see png.h. For explanations of what the fields +contain, see the PNG specification. + +Some of the more important parts of the png_info are: + + png_set_IHDR(png_ptr, info_ptr, width, height, + bit_depth, color_type, interlace_type, + compression_type, filter_method) + + width - holds the width of the image + in pixels (up to 2^31). + + height - holds the height of the image + in pixels (up to 2^31). + + bit_depth - holds the bit depth of one of the + image channels. + (valid values are 1, 2, 4, 8, 16 + and depend also on the + color_type. See also significant + bits (sBIT) below). + + color_type - describes which color/alpha + channels are present. + PNG_COLOR_TYPE_GRAY + (bit depths 1, 2, 4, 8, 16) + PNG_COLOR_TYPE_GRAY_ALPHA + (bit depths 8, 16) + PNG_COLOR_TYPE_PALETTE + (bit depths 1, 2, 4, 8) + PNG_COLOR_TYPE_RGB + (bit_depths 8, 16) + PNG_COLOR_TYPE_RGB_ALPHA + (bit_depths 8, 16) + + PNG_COLOR_MASK_PALETTE + PNG_COLOR_MASK_COLOR + PNG_COLOR_MASK_ALPHA + + interlace_type - PNG_INTERLACE_NONE or + PNG_INTERLACE_ADAM7 + + compression_type - (must be + PNG_COMPRESSION_TYPE_DEFAULT) + + filter_method - (must be PNG_FILTER_TYPE_DEFAULT + or, if you are writing a PNG to + be embedded in a MNG datastream, + can also be + PNG_INTRAPIXEL_DIFFERENCING) + +If you call png_set_IHDR(), the call must appear before any of the +other png_set_*() functions, because they might require access to some of +the IHDR settings. The remaining png_set_*() functions can be called +in any order. + +If you wish, you can reset the compression_type, interlace_type, or +filter_method later by calling png_set_IHDR() again; if you do this, the +width, height, bit_depth, and color_type must be the same in each call. + + png_set_PLTE(png_ptr, info_ptr, palette, + num_palette); + + palette - the palette for the file + (array of png_color) + num_palette - number of entries in the palette + + png_set_gAMA(png_ptr, info_ptr, file_gamma); + png_set_gAMA_fixed(png_ptr, info_ptr, int_file_gamma); + + file_gamma - the gamma at which the image was + created (PNG_INFO_gAMA) + + int_file_gamma - 100,000 times the gamma at which + the image was created + + png_set_cHRM(png_ptr, info_ptr, white_x, white_y, red_x, red_y, + green_x, green_y, blue_x, blue_y) + png_set_cHRM_XYZ(png_ptr, info_ptr, red_X, red_Y, red_Z, green_X, + green_Y, green_Z, blue_X, blue_Y, blue_Z) + png_set_cHRM_fixed(png_ptr, info_ptr, int_white_x, int_white_y, + int_red_x, int_red_y, int_green_x, int_green_y, + int_blue_x, int_blue_y) + png_set_cHRM_XYZ_fixed(png_ptr, info_ptr, int_red_X, int_red_Y, + int_red_Z, int_green_X, int_green_Y, int_green_Z, + int_blue_X, int_blue_Y, int_blue_Z) + + {white,red,green,blue}_{x,y} + A color space encoding specified using the chromaticities + of the end points and the white point. + + {red,green,blue}_{X,Y,Z} + A color space encoding specified using the encoding end + points - the CIE tristimulus specification of the intended + color of the red, green and blue channels in the PNG RGB + data. The white point is simply the sum of the three end + points. + + png_set_sRGB(png_ptr, info_ptr, srgb_intent); + + srgb_intent - the rendering intent + (PNG_INFO_sRGB) The presence of + the sRGB chunk means that the pixel + data is in the sRGB color space. + This chunk also implies specific + values of gAMA and cHRM. Rendering + intent is the CSS-1 property that + has been defined by the International + Color Consortium + (http://www.color.org). + It can be one of + PNG_sRGB_INTENT_SATURATION, + PNG_sRGB_INTENT_PERCEPTUAL, + PNG_sRGB_INTENT_ABSOLUTE, or + PNG_sRGB_INTENT_RELATIVE. + + + png_set_sRGB_gAMA_and_cHRM(png_ptr, info_ptr, + srgb_intent); + + srgb_intent - the rendering intent + (PNG_INFO_sRGB) The presence of the + sRGB chunk means that the pixel + data is in the sRGB color space. + This function also causes gAMA and + cHRM chunks with the specific values + that are consistent with sRGB to be + written. + + png_set_iCCP(png_ptr, info_ptr, name, compression_type, + profile, proflen); + + name - The profile name. + + compression_type - The compression type; always + PNG_COMPRESSION_TYPE_BASE for PNG 1.0. + You may give NULL to this argument to + ignore it. + + profile - International Color Consortium color + profile data. May contain NULs. + + proflen - length of profile data in bytes. + + png_set_sBIT(png_ptr, info_ptr, sig_bit); + + sig_bit - the number of significant bits for + (PNG_INFO_sBIT) each of the gray, red, + green, and blue channels, whichever are + appropriate for the given color type + (png_color_16) + + png_set_tRNS(png_ptr, info_ptr, trans_alpha, + num_trans, trans_color); + + trans_alpha - array of alpha (transparency) + entries for palette (PNG_INFO_tRNS) + + num_trans - number of transparent entries + (PNG_INFO_tRNS) + + trans_color - graylevel or color sample values + (in order red, green, blue) of the + single transparent color for + non-paletted images (PNG_INFO_tRNS) + + png_set_hIST(png_ptr, info_ptr, hist); + + hist - histogram of palette (array of + png_uint_16) (PNG_INFO_hIST) + + png_set_tIME(png_ptr, info_ptr, mod_time); + + mod_time - time image was last modified + (PNG_VALID_tIME) + + png_set_bKGD(png_ptr, info_ptr, background); + + background - background color (of type + png_color_16p) (PNG_VALID_bKGD) + + png_set_text(png_ptr, info_ptr, text_ptr, num_text); + + text_ptr - array of png_text holding image + comments + + text_ptr[i].compression - type of compression used + on "text" PNG_TEXT_COMPRESSION_NONE + PNG_TEXT_COMPRESSION_zTXt + PNG_ITXT_COMPRESSION_NONE + PNG_ITXT_COMPRESSION_zTXt + text_ptr[i].key - keyword for comment. Must contain + 1-79 characters. + text_ptr[i].text - text comments for current + keyword. Can be NULL or empty. + text_ptr[i].text_length - length of text string, + after decompression, 0 for iTXt + text_ptr[i].itxt_length - length of itxt string, + after decompression, 0 for tEXt/zTXt + text_ptr[i].lang - language of comment (NULL or + empty for unknown). + text_ptr[i].translated_keyword - keyword in UTF-8 (NULL + or empty for unknown). + + Note that the itxt_length, lang, and lang_key + members of the text_ptr structure only exist when the + library is built with iTXt chunk support. Prior to + libpng-1.4.0 the library was built by default without + iTXt support. Also note that when iTXt is supported, + they contain NULL pointers when the "compression" + field contains PNG_TEXT_COMPRESSION_NONE or + PNG_TEXT_COMPRESSION_zTXt. + + num_text - number of comments + + png_set_sPLT(png_ptr, info_ptr, &palette_ptr, + num_spalettes); + + palette_ptr - array of png_sPLT_struct structures + to be added to the list of palettes + in the info structure. + num_spalettes - number of palette structures to be + added. + + png_set_oFFs(png_ptr, info_ptr, offset_x, offset_y, + unit_type); + + offset_x - positive offset from the left + edge of the screen + + offset_y - positive offset from the top + edge of the screen + + unit_type - PNG_OFFSET_PIXEL, PNG_OFFSET_MICROMETER + + png_set_pHYs(png_ptr, info_ptr, res_x, res_y, + unit_type); + + res_x - pixels/unit physical resolution + in x direction + + res_y - pixels/unit physical resolution + in y direction + + unit_type - PNG_RESOLUTION_UNKNOWN, + PNG_RESOLUTION_METER + + png_set_sCAL(png_ptr, info_ptr, unit, width, height) + + unit - physical scale units (an integer) + + width - width of a pixel in physical scale units + + height - height of a pixel in physical scale units + (width and height are doubles) + + png_set_sCAL_s(png_ptr, info_ptr, unit, width, height) + + unit - physical scale units (an integer) + + width - width of a pixel in physical scale units + expressed as a string + + height - height of a pixel in physical scale units + (width and height are strings like "2.54") + + png_set_unknown_chunks(png_ptr, info_ptr, &unknowns, + num_unknowns) + + unknowns - array of png_unknown_chunk + structures holding unknown chunks + unknowns[i].name - name of unknown chunk + unknowns[i].data - data of unknown chunk + unknowns[i].size - size of unknown chunk's data + unknowns[i].location - position to write chunk in file + 0: do not write chunk + PNG_HAVE_IHDR: before PLTE + PNG_HAVE_PLTE: before IDAT + PNG_AFTER_IDAT: after IDAT + +The "location" member is set automatically according to +what part of the output file has already been written. +You can change its value after calling png_set_unknown_chunks() +as demonstrated in pngtest.c. Within each of the "locations", +the chunks are sequenced according to their position in the +structure (that is, the value of "i", which is the order in which +the chunk was either read from the input file or defined with +png_set_unknown_chunks). + +A quick word about text and num_text. text is an array of png_text +structures. num_text is the number of valid structures in the array. +Each png_text structure holds a language code, a keyword, a text value, +and a compression type. + +The compression types have the same valid numbers as the compression +types of the image data. Currently, the only valid number is zero. +However, you can store text either compressed or uncompressed, unlike +images, which always have to be compressed. So if you don't want the +text compressed, set the compression type to PNG_TEXT_COMPRESSION_NONE. +Because tEXt and zTXt chunks don't have a language field, if you +specify PNG_TEXT_COMPRESSION_NONE or PNG_TEXT_COMPRESSION_zTXt +any language code or translated keyword will not be written out. + +Until text gets around a few hundred bytes, it is not worth compressing it. +After the text has been written out to the file, the compression type +is set to PNG_TEXT_COMPRESSION_NONE_WR or PNG_TEXT_COMPRESSION_zTXt_WR, +so that it isn't written out again at the end (in case you are calling +png_write_end() with the same struct). + +The keywords that are given in the PNG Specification are: + + Title Short (one line) title or + caption for image + + Author Name of image's creator + + Description Description of image (possibly long) + + Copyright Copyright notice + + Creation Time Time of original image creation + (usually RFC 1123 format, see below) + + Software Software used to create the image + + Disclaimer Legal disclaimer + + Warning Warning of nature of content + + Source Device used to create the image + + Comment Miscellaneous comment; conversion + from other image format + +The keyword-text pairs work like this. Keywords should be short +simple descriptions of what the comment is about. Some typical +keywords are found in the PNG specification, as is some recommendations +on keywords. You can repeat keywords in a file. You can even write +some text before the image and some after. For example, you may want +to put a description of the image before the image, but leave the +disclaimer until after, so viewers working over modem connections +don't have to wait for the disclaimer to go over the modem before +they start seeing the image. Finally, keywords should be full +words, not abbreviations. Keywords and text are in the ISO 8859-1 +(Latin-1) character set (a superset of regular ASCII) and can not +contain NUL characters, and should not contain control or other +unprintable characters. To make the comments widely readable, stick +with basic ASCII, and avoid machine specific character set extensions +like the IBM-PC character set. The keyword must be present, but +you can leave off the text string on non-compressed pairs. +Compressed pairs must have a text string, as only the text string +is compressed anyway, so the compression would be meaningless. + +PNG supports modification time via the png_time structure. Two +conversion routines are provided, png_convert_from_time_t() for +time_t and png_convert_from_struct_tm() for struct tm. The +time_t routine uses gmtime(). You don't have to use either of +these, but if you wish to fill in the png_time structure directly, +you should provide the time in universal time (GMT) if possible +instead of your local time. Note that the year number is the full +year (e.g. 1998, rather than 98 - PNG is year 2000 compliant!), and +that months start with 1. + +If you want to store the time of the original image creation, you should +use a plain tEXt chunk with the "Creation Time" keyword. This is +necessary because the "creation time" of a PNG image is somewhat vague, +depending on whether you mean the PNG file, the time the image was +created in a non-PNG format, a still photo from which the image was +scanned, or possibly the subject matter itself. In order to facilitate +machine-readable dates, it is recommended that the "Creation Time" +tEXt chunk use RFC 1123 format dates (e.g. "22 May 1997 18:07:10 GMT"), +although this isn't a requirement. Unlike the tIME chunk, the +"Creation Time" tEXt chunk is not expected to be automatically changed +by the software. To facilitate the use of RFC 1123 dates, a function +png_convert_to_rfc1123_buffer(png_ptr, buffer, png_timep) is provided to +convert from PNG time to an RFC 1123 format string. The caller must provide +a writeable buffer of at least 29 bytes. + +.SS Writing unknown chunks + +You can use the png_set_unknown_chunks function to queue up chunks +for writing. You give it a chunk name, raw data, and a size; that's +all there is to it. The chunks will be written by the next following +png_write_info_before_PLTE, png_write_info, or png_write_end function. +Any chunks previously read into the info structure's unknown-chunk +list will also be written out in a sequence that satisfies the PNG +specification's ordering rules. + +.SS The high-level write interface + +At this point there are two ways to proceed; through the high-level +write interface, or through a sequence of low-level write operations. +You can use the high-level interface if your image data is present +in the info structure. All defined output +transformations are permitted, enabled by the following masks. + + PNG_TRANSFORM_IDENTITY No transformation + PNG_TRANSFORM_PACKING Pack 1, 2 and 4-bit samples + PNG_TRANSFORM_PACKSWAP Change order of packed + pixels to LSB first + PNG_TRANSFORM_INVERT_MONO Invert monochrome images + PNG_TRANSFORM_SHIFT Normalize pixels to the + sBIT depth + PNG_TRANSFORM_BGR Flip RGB to BGR, RGBA + to BGRA + PNG_TRANSFORM_SWAP_ALPHA Flip RGBA to ARGB or GA + to AG + PNG_TRANSFORM_INVERT_ALPHA Change alpha from opacity + to transparency + PNG_TRANSFORM_SWAP_ENDIAN Byte-swap 16-bit samples + PNG_TRANSFORM_STRIP_FILLER Strip out filler + bytes (deprecated). + PNG_TRANSFORM_STRIP_FILLER_BEFORE Strip out leading + filler bytes + PNG_TRANSFORM_STRIP_FILLER_AFTER Strip out trailing + filler bytes + +If you have valid image data in the info structure (you can use +png_set_rows() to put image data in the info structure), simply do this: + + png_write_png(png_ptr, info_ptr, png_transforms, NULL) + +where png_transforms is an integer containing the bitwise OR of some set of +transformation flags. This call is equivalent to png_write_info(), +followed the set of transformations indicated by the transform mask, +then png_write_image(), and finally png_write_end(). + +(The final parameter of this call is not yet used. Someday it might point +to transformation parameters required by some future output transform.) + +You must use png_transforms and not call any png_set_transform() functions +when you use png_write_png(). + +.SS The low-level write interface + +If you are going the low-level route instead, you are now ready to +write all the file information up to the actual image data. You do +this with a call to png_write_info(). + + png_write_info(png_ptr, info_ptr); + +Note that there is one transformation you may need to do before +png_write_info(). In PNG files, the alpha channel in an image is the +level of opacity. If your data is supplied as a level of transparency, +you can invert the alpha channel before you write it, so that 0 is +fully transparent and 255 (in 8-bit or paletted images) or 65535 +(in 16-bit images) is fully opaque, with + + png_set_invert_alpha(png_ptr); + +This must appear before png_write_info() instead of later with the +other transformations because in the case of paletted images the tRNS +chunk data has to be inverted before the tRNS chunk is written. If +your image is not a paletted image, the tRNS data (which in such cases +represents a single color to be rendered as transparent) won't need to +be changed, and you can safely do this transformation after your +png_write_info() call. + +If you need to write a private chunk that you want to appear before +the PLTE chunk when PLTE is present, you can write the PNG info in +two steps, and insert code to write your own chunk between them: + + png_write_info_before_PLTE(png_ptr, info_ptr); + png_set_unknown_chunks(png_ptr, info_ptr, ...); + png_write_info(png_ptr, info_ptr); + +After you've written the file information, you can set up the library +to handle any special transformations of the image data. The various +ways to transform the data will be described in the order that they +should occur. This is important, as some of these change the color +type and/or bit depth of the data, and some others only work on +certain color types and bit depths. Even though each transformation +checks to see if it has data that it can do something with, you should +make sure to only enable a transformation if it will be valid for the +data. For example, don't swap red and blue on grayscale data. + +PNG files store RGB pixels packed into 3 or 6 bytes. This code tells +the library to strip input data that has 4 or 8 bytes per pixel down +to 3 or 6 bytes (or strip 2 or 4-byte grayscale+filler data to 1 or 2 +bytes per pixel). + + png_set_filler(png_ptr, 0, PNG_FILLER_BEFORE); + +where the 0 is unused, and the location is either PNG_FILLER_BEFORE or +PNG_FILLER_AFTER, depending upon whether the filler byte in the pixel +is stored XRGB or RGBX. + +PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as +they can, resulting in, for example, 8 pixels per byte for 1 bit files. +If the data is supplied at 1 pixel per byte, use this code, which will +correctly pack the pixels into a single byte: + + png_set_packing(png_ptr); + +PNG files reduce possible bit depths to 1, 2, 4, 8, and 16. If your +data is of another bit depth, you can write an sBIT chunk into the +file so that decoders can recover the original data if desired. + + /* Set the true bit depth of the image data */ + if (color_type & PNG_COLOR_MASK_COLOR) + { + sig_bit.red = true_bit_depth; + sig_bit.green = true_bit_depth; + sig_bit.blue = true_bit_depth; + } + + else + { + sig_bit.gray = true_bit_depth; + } + + if (color_type & PNG_COLOR_MASK_ALPHA) + { + sig_bit.alpha = true_bit_depth; + } + + png_set_sBIT(png_ptr, info_ptr, &sig_bit); + +If the data is stored in the row buffer in a bit depth other than +one supported by PNG (e.g. 3 bit data in the range 0-7 for a 4-bit PNG), +this will scale the values to appear to be the correct bit depth as +is required by PNG. + + png_set_shift(png_ptr, &sig_bit); + +PNG files store 16-bit pixels in network byte order (big-endian, +ie. most significant bits first). This code would be used if they are +supplied the other way (little-endian, i.e. least significant bits +first, the way PCs store them): + + if (bit_depth > 8) + png_set_swap(png_ptr); + +If you are using packed-pixel images (1, 2, or 4 bits/pixel), and you +need to change the order the pixels are packed into bytes, you can use: + + if (bit_depth < 8) + png_set_packswap(png_ptr); + +PNG files store 3 color pixels in red, green, blue order. This code +would be used if they are supplied as blue, green, red: + + png_set_bgr(png_ptr); + +PNG files describe monochrome as black being zero and white being +one. This code would be used if the pixels are supplied with this reversed +(black being one and white being zero): + + png_set_invert_mono(png_ptr); + +Finally, you can write your own transformation function if none of +the existing ones meets your needs. This is done by setting a callback +with + + png_set_write_user_transform_fn(png_ptr, + write_transform_fn); + +You must supply the function + + void write_transform_fn(png_structp png_ptr, png_row_infop + row_info, png_bytep data) + +See pngtest.c for a working example. Your function will be called +before any of the other transformations are processed. If supported +libpng also supplies an information routine that may be called from +your callback: + + png_get_current_row_number(png_ptr); + png_get_current_pass_number(png_ptr); + +This returns the current row passed to the transform. With interlaced +images the value returned is the row in the input sub-image image. Use +PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to +find the output pixel (x,y) given an interlaced sub-image pixel (row,col,pass). + +The discussion of interlace handling above contains more information on how to +use these values. + +You can also set up a pointer to a user structure for use by your +callback function. + + png_set_user_transform_info(png_ptr, user_ptr, 0, 0); + +The user_channels and user_depth parameters of this function are ignored +when writing; you can set them to zero as shown. + +You can retrieve the pointer via the function png_get_user_transform_ptr(). +For example: + + voidp write_user_transform_ptr = + png_get_user_transform_ptr(png_ptr); + +It is possible to have libpng flush any pending output, either manually, +or automatically after a certain number of lines have been written. To +flush the output stream a single time call: + + png_write_flush(png_ptr); + +and to have libpng flush the output stream periodically after a certain +number of scanlines have been written, call: + + png_set_flush(png_ptr, nrows); + +Note that the distance between rows is from the last time png_write_flush() +was called, or the first row of the image if it has never been called. +So if you write 50 lines, and then png_set_flush 25, it will flush the +output on the next scanline, and every 25 lines thereafter, unless +png_write_flush() is called before 25 more lines have been written. +If nrows is too small (less than about 10 lines for a 640 pixel wide +RGB image) the image compression may decrease noticeably (although this +may be acceptable for real-time applications). Infrequent flushing will +only degrade the compression performance by a few percent over images +that do not use flushing. + +.SS Writing the image data + +That's it for the transformations. Now you can write the image data. +The simplest way to do this is in one function call. If you have the +whole image in memory, you can just call png_write_image() and libpng +will write the image. You will need to pass in an array of pointers to +each row. This function automatically handles interlacing, so you don't +need to call png_set_interlace_handling() or call this function multiple +times, or any of that other stuff necessary with png_write_rows(). + + png_write_image(png_ptr, row_pointers); + +where row_pointers is: + + png_byte *row_pointers[height]; + +You can point to void or char or whatever you use for pixels. + +If you don't want to write the whole image at once, you can +use png_write_rows() instead. If the file is not interlaced, +this is simple: + + png_write_rows(png_ptr, row_pointers, + number_of_rows); + +row_pointers is the same as in the png_write_image() call. + +If you are just writing one row at a time, you can do this with +a single row_pointer instead of an array of row_pointers: + + png_bytep row_pointer = row; + + png_write_row(png_ptr, row_pointer); + +When the file is interlaced, things can get a good deal more complicated. +The only currently (as of the PNG Specification version 1.2, dated July +1999) defined interlacing scheme for PNG files is the "Adam7" interlace +scheme, that breaks down an image into seven smaller images of varying +size. libpng will build these images for you, or you can do them +yourself. If you want to build them yourself, see the PNG specification +for details of which pixels to write when. + +If you don't want libpng to handle the interlacing details, just +use png_set_interlace_handling() and call png_write_rows() the +correct number of times to write all the sub-images +(png_set_interlace_handling() returns the number of sub-images.) + +If you want libpng to build the sub-images, call this before you start +writing any rows: + + number_of_passes = png_set_interlace_handling(png_ptr); + +This will return the number of passes needed. Currently, this is seven, +but may change if another interlace type is added. + +Then write the complete image number_of_passes times. + + png_write_rows(png_ptr, row_pointers, number_of_rows); + +Think carefully before you write an interlaced image. Typically code that +reads such images reads all the image data into memory, uncompressed, before +doing any processing. Only code that can display an image on the fly can +take advantage of the interlacing and even then the image has to be exactly +the correct size for the output device, because scaling an image requires +adjacent pixels and these are not available until all the passes have been +read. + +If you do write an interlaced image you will hardly ever need to handle +the interlacing yourself. Call png_set_interlace_handling() and use the +approach described above. + +The only time it is conceivable that you will really need to write an +interlaced image pass-by-pass is when you have read one pass by pass and +made some pixel-by-pixel transformation to it, as described in the read +code above. In this case use the PNG_PASS_ROWS and PNG_PASS_COLS macros +to determine the size of each sub-image in turn and simply write the rows +you obtained from the read code. + +.SS Finishing a sequential write + +After you are finished writing the image, you should finish writing +the file. If you are interested in writing comments or time, you should +pass an appropriately filled png_info pointer. If you are not interested, +you can pass NULL. + + png_write_end(png_ptr, info_ptr); + +When you are done, you can free all memory used by libpng like this: + + png_destroy_write_struct(&png_ptr, &info_ptr); + +It is also possible to individually free the info_ptr members that +point to libpng-allocated storage with the following function: + + png_free_data(png_ptr, info_ptr, mask, seq) + + mask - identifies data to be freed, a mask + containing the bitwise OR of one or + more of + PNG_FREE_PLTE, PNG_FREE_TRNS, + PNG_FREE_HIST, PNG_FREE_ICCP, + PNG_FREE_PCAL, PNG_FREE_ROWS, + PNG_FREE_SCAL, PNG_FREE_SPLT, + PNG_FREE_TEXT, PNG_FREE_UNKN, + or simply PNG_FREE_ALL + + seq - sequence number of item to be freed + (-1 for all items) + +This function may be safely called when the relevant storage has +already been freed, or has not yet been allocated, or was allocated +by the user and not by libpng, and will in those cases do nothing. +The "seq" parameter is ignored if only one item of the selected data +type, such as PLTE, is allowed. If "seq" is not -1, and multiple items +are allowed for the data type identified in the mask, such as text or +sPLT, only the n'th item in the structure is freed, where n is "seq". + +If you allocated data such as a palette that you passed in to libpng +with png_set_*, you must not free it until just before the call to +png_destroy_write_struct(). + +The default behavior is only to free data that was allocated internally +by libpng. This can be changed, so that libpng will not free the data, +or so that it will free data that was allocated by the user with png_malloc() +or png_calloc() and passed in via a png_set_*() function, with + + png_data_freer(png_ptr, info_ptr, freer, mask) + + freer - one of + PNG_DESTROY_WILL_FREE_DATA + PNG_SET_WILL_FREE_DATA + PNG_USER_WILL_FREE_DATA + + mask - which data elements are affected + same choices as in png_free_data() + +For example, to transfer responsibility for some data from a read structure +to a write structure, you could use + + png_data_freer(read_ptr, read_info_ptr, + PNG_USER_WILL_FREE_DATA, + PNG_FREE_PLTE|PNG_FREE_tRNS|PNG_FREE_hIST) + + png_data_freer(write_ptr, write_info_ptr, + PNG_DESTROY_WILL_FREE_DATA, + PNG_FREE_PLTE|PNG_FREE_tRNS|PNG_FREE_hIST) + +thereby briefly reassigning responsibility for freeing to the user but +immediately afterwards reassigning it once more to the write_destroy +function. Having done this, it would then be safe to destroy the read +structure and continue to use the PLTE, tRNS, and hIST data in the write +structure. + +This function only affects data that has already been allocated. +You can call this function before calling after the png_set_*() functions +to control whether the user or png_destroy_*() is supposed to free the data. +When the user assumes responsibility for libpng-allocated data, the +application must use +png_free() to free it, and when the user transfers responsibility to libpng +for data that the user has allocated, the user must have used png_malloc() +or png_calloc() to allocate it. + +If you allocated text_ptr.text, text_ptr.lang, and text_ptr.translated_keyword +separately, do not transfer responsibility for freeing text_ptr to libpng, +because when libpng fills a png_text structure it combines these members with +the key member, and png_free_data() will free only text_ptr.key. Similarly, +if you transfer responsibility for free'ing text_ptr from libpng to your +application, your application must not separately free those members. +For a more compact example of writing a PNG image, see the file example.c. + +.SH V. Simplified API + +The simplified API, which became available in libpng-1.6.0, hides the details +of both libpng and the PNG file format itself. +It allows PNG files to be read into a very limited number of +in-memory bitmap formats or to be written from the same formats. If these +formats do not accomodate your needs then you can, and should, use the more +sophisticated APIs above - these support a wide variety of in-memory formats +and a wide variety of sophisticated transformations to those formats as well +as a wide variety of APIs to manipulate ancilliary information. + +To read a PNG file using the simplified API: + + 1) Declare a 'png_image' structure (see below) on the + stack and memset() it to all zero. + + 2) Call the appropriate png_image_begin_read... function. + + 3) Set the png_image 'format' member to the required + format and allocate a buffer for the image. + + 4) Call png_image_finish_read to read the image into + your buffer. + +There are no restrictions on the format of the PNG input itself; all valid +color types, bit depths, and interlace methods are acceptable, and the +input image is transformed as necessary to the requested in-memory format +during the png_image_finish_read() step. + +To write a PNG file using the simplified API: + + 1) Declare a 'png_image' structure on the stack and memset() + it to all zero. + + 2) Initialize the members of the structure that describe the + image, setting the 'format' member to the format of the + image in memory. + + 3) Call the appropriate png_image_write... function with a + pointer to the image to write the PNG data. + +png_image is a structure that describes the in-memory format of an image +when it is being read or define the in-memory format of an image that you +need to write. The "png_image" structure contains the following members: + + png_uint_32 version Set to PNG_IMAGE_VERSION + png_uint_32 width Image width in pixels (columns) + png_uint_32 height Image height in pixels (rows) + png_uint_32 format Image format as defined below + png_uint_32 flags A bit mask containing informational flags + png_controlp opaque Initialize to NULL, free with png_image_free + png_uint_32 colormap_entries; Number of entries in the color-map + png_uint_32 warning_or_error; + char message[64]; + +In the event of an error or warning the following field warning_or_error +field will be set to a non-zero value and the 'message' field will contain +a '\0' terminated string with the libpng error or warning message. If both +warnings and an error were encountered, only the error is recorded. If there +are multiple warnings, only the first one is recorded. + +The upper 30 bits of this value are reserved; the low two bits contain +a two bit code such that a value more than 1 indicates a failure in the API +just called: + + 0 - no warning or error + 1 - warning + 2 - error + 3 - error preceded by warning + +The pixels (samples) of the image have one to four channels whose components +have original values in the range 0 to 1.0: + + 1: A single gray or luminance channel (G). + 2: A gray/luminance channel and an alpha channel (GA). + 3: Three red, green, blue color channels (RGB). + 4: Three color channels and an alpha channel (RGBA). + +The channels are encoded in one of two ways: + + a) As a small integer, value 0..255, contained in a single byte. For the +alpha channel the original value is simply value/255. For the color or +luminance channels the value is encoded according to the sRGB specification +and matches the 8-bit format expected by typical display devices. + +The color/gray channels are not scaled (pre-multiplied) by the alpha +channel and are suitable for passing to color management software. + + b) As a value in the range 0..65535, contained in a 2-byte integer. All +channels can be converted to the original value by dividing by 65535; all +channels are linear. Color channels use the RGB encoding (RGB end-points) of +the sRGB specification. This encoding is identified by the +PNG_FORMAT_FLAG_LINEAR flag below. + +When an alpha channel is present it is expected to denote pixel coverage +of the color or luminance channels and is returned as an associated alpha +channel: the color/gray channels are scaled (pre-multiplied) by the alpha +value. + +When a color-mapped image is used as a result of calling +png_image_read_colormap or png_image_write_colormap the channels are encoded +in the color-map and the descriptions above apply to the color-map entries. +The image data is encoded as small integers, value 0..255, that index the +entries in the color-map. One integer (one byte) is stored for each pixel. + +PNG_FORMAT_* + +The #defines to be used in png_image::format. Each #define identifies a +particular layout of channel data and, if present, alpha values. There are +separate defines for each of the two channel encodings. + +A format is built up using single bit flag values. Not all combinations are +valid: use the bit flag values below for testing a format returned by the +read APIs, but set formats from the derived values. + +When reading or writing color-mapped images the format should be set to the +format of the entries in the color-map then png_image_{read,write}_colormap +called to read or write the color-map and set the format correctly for the +image data. Do not set the PNG_FORMAT_FLAG_COLORMAP bit directly! + +NOTE: libpng can be built with particular features disabled, if you see +compiler errors because the definition of one of the following flags has been +compiled out it is because libpng does not have the required support. It is +possible, however, for the libpng configuration to enable the format on just +read or just write; in that case you may see an error at run time. You can +guard against this by checking for the definition of: + + PNG_SIMPLIFIED_{READ,WRITE}_{BGR,AFIRST}_SUPPORTED + + PNG_FORMAT_FLAG_ALPHA 0x01 format with an alpha channel + PNG_FORMAT_FLAG_COLOR 0x02 color format: otherwise grayscale + PNG_FORMAT_FLAG_LINEAR 0x04 png_uint_16 channels else png_byte + PNG_FORMAT_FLAG_COLORMAP 0x08 libpng use only + PNG_FORMAT_FLAG_BGR 0x10 BGR colors, else order is RGB + PNG_FORMAT_FLAG_AFIRST 0x20 alpha channel comes first + +Supported formats are as follows. Future versions of libpng may support more +formats; for compatibility with older versions simply check if the format +macro is defined using #ifdef. These defines describe the in-memory layout +of the components of the pixels of the image. + +First the single byte formats: + + PNG_FORMAT_GRAY 0 + PNG_FORMAT_GA PNG_FORMAT_FLAG_ALPHA + PNG_FORMAT_AG (PNG_FORMAT_GA|PNG_FORMAT_FLAG_AFIRST) + PNG_FORMAT_RGB PNG_FORMAT_FLAG_COLOR + PNG_FORMAT_BGR (PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_BGR) + PNG_FORMAT_RGBA (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_ALPHA) + PNG_FORMAT_ARGB (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_AFIRST) + PNG_FORMAT_BGRA (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_ALPHA) + PNG_FORMAT_ABGR (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_AFIRST) + +Then the linear 2-byte formats. When naming these "Y" is used to +indicate a luminance (gray) channel. The component order within the pixel +is always the same - there is no provision for swapping the order of the +components in the linear format. + + PNG_FORMAT_LINEAR_Y PNG_FORMAT_FLAG_LINEAR + PNG_FORMAT_LINEAR_Y_ALPHA + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_ALPHA) + PNG_FORMAT_LINEAR_RGB + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR) + PNG_FORMAT_LINEAR_RGB_ALPHA + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR| + PNG_FORMAT_FLAG_ALPHA) + +Color-mapped formats are obtained by calling png_image_{read,write}_colormap, +as appropriate after setting png_image::format to the format of the color-map +to be read or written. Applications may check the value of +PNG_FORMAT_FLAG_COLORMAP to see if they have called the colormap API. The +format of the color-map may be extracted using the following macro. + + PNG_FORMAT_OF_COLORMAP(fmt) ((fmt) & ~PNG_FORMAT_FLAG_COLORMAP) + +PNG_IMAGE macros + +These are convenience macros to derive information from a png_image +structure. The PNG_IMAGE_SAMPLE_ macros return values appropriate to the +actual image sample values - either the entries in the color-map or the +pixels in the image. The PNG_IMAGE_PIXEL_ macros return corresponding values +for the pixels and will always return 1 after a call to +png_image_{read,write}_colormap. The remaining macros return information +about the rows in the image and the complete image. + +NOTE: All the macros that take a png_image::format parameter are compile time +constants if the format parameter is, itself, a constant. Therefore these +macros can be used in array declarations and case labels where required. +Similarly the macros are also pre-processor constants (sizeof is not used) so +they can be used in #if tests. + +First the information about the samples. + + PNG_IMAGE_SAMPLE_CHANNELS(fmt) + Returns the total number of channels in a given format: 1..4 + + PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt) + Returns the size in bytes of a single component of a pixel or color-map + entry (as appropriate) in the image. + + PNG_IMAGE_SAMPLE_SIZE(fmt) + This is the size of the sample data for one sample. If the image is + color-mapped it is the size of one color-map entry (and image pixels are + one byte in size), otherwise it is the size of one image pixel. + + PNG_IMAGE_COLORMAP_SIZE(fmt) + The size of the color-map required by the format; this is the size of the + color-map buffer passed to the png_image_{read,write}_colormap APIs, it is + a fixed number determined by the format so can easily be allocated on the + stack if necessary. + +#define PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * 256) + /* The maximum size of the color-map required by the format expressed in a + * count of components. This can be used to compile-time allocate a + * color-map: + * + * png_uint_16 colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(linear_fmt)]; + * + * png_byte colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(sRGB_fmt)]; + * + * Alternatively use the PNG_IMAGE_COLORMAP_SIZE macro below to use the + * information from one of the png_image_begin_read_ APIs and dynamically + * allocate the required memory. + */ + + +Corresponding information about the pixels + + PNG_IMAGE_PIXEL_(test,fmt) + + PNG_IMAGE_PIXEL_CHANNELS(fmt) + The number of separate channels (components) in a pixel; 1 for a + color-mapped image. + + PNG_IMAGE_PIXEL_COMPONENT_SIZE(fmt)\ + The size, in bytes, of each component in a pixel; 1 for a color-mapped + image. + + PNG_IMAGE_PIXEL_SIZE(fmt) + The size, in bytes, of a complete pixel; 1 for a color-mapped image. + +Information about the whole row, or whole image + + PNG_IMAGE_ROW_STRIDE(image) + Returns the total number of components in a single row of the image; this + is the minimum 'row stride', the minimum count of components between each + row. For a color-mapped image this is the minimum number of bytes in a + row. + + PNG_IMAGE_BUFFER_SIZE(image, row_stride) + Returns the size, in bytes, of an image buffer given a png_image and a row + stride - the number of components to leave space for in each row. + + PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB == 0x01 + This indicates the the RGB values of the in-memory bitmap do not + correspond to the red, green and blue end-points defined by sRGB. + + PNG_IMAGE_FLAG_COLORMAP == 0x02 + The PNG is color-mapped. If this flag is set png_image_read_colormap + can be used without further loss of image information. If it is not set + png_image_read_colormap will cause significant loss if the image has any + +READ APIs + + The png_image passed to the read APIs must have been initialized by setting + the png_controlp field 'opaque' to NULL (or, better, memset the whole thing.) + + int png_image_begin_read_from_file( png_imagep image, + const char *file_name) + + The named file is opened for read and the image header + is filled in from the PNG header in the file. + + int png_image_begin_read_from_stdio (png_imagep image, + FILE* file) + + The PNG header is read from the stdio FILE object. + + int png_image_begin_read_from_memory(png_imagep image, + png_const_voidp memory, png_size_t size) + + The PNG header is read from the given memory buffer. + + int png_image_finish_read(png_imagep image, + png_colorp background, void *buffer, + png_int_32 row_stride, void *colormap)); + + Finish reading the image into the supplied buffer and + clean up the png_image structure. + + row_stride is the step, in png_byte or png_uint_16 units + as appropriate, between adjacent rows. A positive stride + indicates that the top-most row is first in the buffer - + the normal top-down arrangement. A negative stride + indicates that the bottom-most row is first in the buffer. + + background need only be supplied if an alpha channel must + be removed from a png_byte format and the removal is to be + done by compositing on a solid color; otherwise it may be + NULL and any composition will be done directly onto the + buffer. The value is an sRGB color to use for the + background, for grayscale output the green channel is used. + + For linear output removing the alpha channel is always done + by compositing on black. + + void png_image_free(png_imagep image) + + Free any data allocated by libpng in image->opaque, + setting the pointer to NULL. May be called at any time + after the structure is initialized. + +When the simplified API needs to convert between sRGB and linear colorspaces, +the actual sRGB transfer curve defined in the sRGB specification (see the +article at http://en.wikipedia.org/wiki/SRGB) is used, not the gamma=1/2.2 +approximation used elsewhere in libpng. + +WRITE APIS + +For write you must initialize a png_image structure to describe the image to +be written: + + version: must be set to PNG_IMAGE_VERSION + opaque: must be initialized to NULL + width: image width in pixels + height: image height in rows + format: the format of the data you wish to write + flags: set to 0 unless one of the defined flags applies; set + PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB for color format images + where the RGB values do not correspond to the colors in sRGB. + colormap_entries: set to the number of entries in the color-map (0 to 256) + + int png_image_write_to_file, (png_imagep image, + const char *file, int convert_to_8bit, const void *buffer, + png_int_32 row_stride, const void *colormap)); + + Write the image to the named file. + + int png_image_write_to_stdio(png_imagep image, FILE *file, + int convert_to_8_bit, const void *buffer, + png_int_32 row_stride, const void *colormap) + + Write the image to the given (FILE*). + +With all write APIs if image is in one of the linear formats with +(png_uint_16) data then setting convert_to_8_bit will cause the output to be +a (png_byte) PNG gamma encoded according to the sRGB specification, otherwise +a 16-bit linear encoded PNG file is written. + +With all APIs row_stride is handled as in the read APIs - it is the spacing +from one row to the next in component sized units (float) and if negative +indicates a bottom-up row layout in the buffer. + +Note that the write API does not support interlacing, sub-8-bit pixels, +and indexed (paletted) images. + +.SH VI. Modifying/Customizing libpng + +There are two issues here. The first is changing how libpng does +standard things like memory allocation, input/output, and error handling. +The second deals with more complicated things like adding new chunks, +adding new transformations, and generally changing how libpng works. +Both of those are compile-time issues; that is, they are generally +determined at the time the code is written, and there is rarely a need +to provide the user with a means of changing them. + +Memory allocation, input/output, and error handling + +All of the memory allocation, input/output, and error handling in libpng +goes through callbacks that are user-settable. The default routines are +in pngmem.c, pngrio.c, pngwio.c, and pngerror.c, respectively. To change +these functions, call the appropriate png_set_*_fn() function. + +Memory allocation is done through the functions png_malloc(), png_calloc(), +and png_free(). The png_malloc() and png_free() functions currently just +call the standard C functions and png_calloc() calls png_malloc() and then +clears the newly allocated memory to zero; note that png_calloc(png_ptr, size) +is not the same as the calloc(number, size) function provided by stdlib.h. +There is limited support for certain systems with segmented memory +architectures and the types of pointers declared by png.h match this; you +will have to use appropriate pointers in your application. Since it is +unlikely that the method of handling memory allocation on a platform +will change between applications, these functions must be modified in +the library at compile time. If you prefer to use a different method +of allocating and freeing data, you can use png_create_read_struct_2() or +png_create_write_struct_2() to register your own functions as described +above. These functions also provide a void pointer that can be retrieved +via + + mem_ptr=png_get_mem_ptr(png_ptr); + +Your replacement memory functions must have prototypes as follows: + + png_voidp malloc_fn(png_structp png_ptr, + png_alloc_size_t size); + + void free_fn(png_structp png_ptr, png_voidp ptr); + +Your malloc_fn() must return NULL in case of failure. The png_malloc() +function will normally call png_error() if it receives a NULL from the +system memory allocator or from your replacement malloc_fn(). + +Your free_fn() will never be called with a NULL ptr, since libpng's +png_free() checks for NULL before calling free_fn(). + +Input/Output in libpng is done through png_read() and png_write(), +which currently just call fread() and fwrite(). The FILE * is stored in +png_struct and is initialized via png_init_io(). If you wish to change +the method of I/O, the library supplies callbacks that you can set +through the function png_set_read_fn() and png_set_write_fn() at run +time, instead of calling the png_init_io() function. These functions +also provide a void pointer that can be retrieved via the function +png_get_io_ptr(). For example: + + png_set_read_fn(png_structp read_ptr, + voidp read_io_ptr, png_rw_ptr read_data_fn) + + png_set_write_fn(png_structp write_ptr, + voidp write_io_ptr, png_rw_ptr write_data_fn, + png_flush_ptr output_flush_fn); + + voidp read_io_ptr = png_get_io_ptr(read_ptr); + voidp write_io_ptr = png_get_io_ptr(write_ptr); + +The replacement I/O functions must have prototypes as follows: + + void user_read_data(png_structp png_ptr, + png_bytep data, png_size_t length); + + void user_write_data(png_structp png_ptr, + png_bytep data, png_size_t length); + + void user_flush_data(png_structp png_ptr); + +The user_read_data() function is responsible for detecting and +handling end-of-data errors. + +Supplying NULL for the read, write, or flush functions sets them back +to using the default C stream functions, which expect the io_ptr to +point to a standard *FILE structure. It is probably a mistake +to use NULL for one of write_data_fn and output_flush_fn but not both +of them, unless you have built libpng with PNG_NO_WRITE_FLUSH defined. +It is an error to read from a write stream, and vice versa. + +Error handling in libpng is done through png_error() and png_warning(). +Errors handled through png_error() are fatal, meaning that png_error() +should never return to its caller. Currently, this is handled via +setjmp() and longjmp() (unless you have compiled libpng with +PNG_NO_SETJMP, in which case it is handled via PNG_ABORT()), +but you could change this to do things like exit() if you should wish, +as long as your function does not return. + +On non-fatal errors, png_warning() is called +to print a warning message, and then control returns to the calling code. +By default png_error() and png_warning() print a message on stderr via +fprintf() unless the library is compiled with PNG_NO_CONSOLE_IO defined +(because you don't want the messages) or PNG_NO_STDIO defined (because +fprintf() isn't available). If you wish to change the behavior of the error +functions, you will need to set up your own message callbacks. These +functions are normally supplied at the time that the png_struct is created. +It is also possible to redirect errors and warnings to your own replacement +functions after png_create_*_struct() has been called by calling: + + png_set_error_fn(png_structp png_ptr, + png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warning_fn); + + png_voidp error_ptr = png_get_error_ptr(png_ptr); + +If NULL is supplied for either error_fn or warning_fn, then the libpng +default function will be used, calling fprintf() and/or longjmp() if a +problem is encountered. The replacement error functions should have +parameters as follows: + + void user_error_fn(png_structp png_ptr, + png_const_charp error_msg); + + void user_warning_fn(png_structp png_ptr, + png_const_charp warning_msg); + +The motivation behind using setjmp() and longjmp() is the C++ throw and +catch exception handling methods. This makes the code much easier to write, +as there is no need to check every return code of every function call. +However, there are some uncertainties about the status of local variables +after a longjmp, so the user may want to be careful about doing anything +after setjmp returns non-zero besides returning itself. Consult your +compiler documentation for more details. For an alternative approach, you +may wish to use the "cexcept" facility (see http://cexcept.sourceforge.net), +which is illustrated in pngvalid.c and in contrib/visupng. + +Beginning in libpng-1.4.0, the png_set_benign_errors() API became available. +You can use this to handle certain errors (normally handled as errors) +as warnings. + + png_set_benign_errors (png_ptr, int allowed); + + allowed: 0: (default) treat png_benign_error() an error. + 1: treat png_benign_error() as a warning. + +.SS Custom chunks + +If you need to read or write custom chunks, you may need to get deeper +into the libpng code. The library now has mechanisms for storing +and writing chunks of unknown type; you can even declare callbacks +for custom chunks. However, this may not be good enough if the +library code itself needs to know about interactions between your +chunk and existing `intrinsic' chunks. + +If you need to write a new intrinsic chunk, first read the PNG +specification. Acquire a first level of understanding of how it works. +Pay particular attention to the sections that describe chunk names, +and look at how other chunks were designed, so you can do things +similarly. Second, check out the sections of libpng that read and +write chunks. Try to find a chunk that is similar to yours and use +it as a template. More details can be found in the comments inside +the code. It is best to handle private or unknown chunks in a generic method, +via callback functions, instead of by modifying libpng functions. This +is illustrated in pngtest.c, which uses a callback function to handle a +private "vpAg" chunk and the new "sTER" chunk, which are both unknown to +libpng. + +If you wish to write your own transformation for the data, look through +the part of the code that does the transformations, and check out some of +the simpler ones to get an idea of how they work. Try to find a similar +transformation to the one you want to add and copy off of it. More details +can be found in the comments inside the code itself. + +.SS Configuring for 16-bit platforms + +You will want to look into zconf.h to tell zlib (and thus libpng) that +it cannot allocate more then 64K at a time. Even if you can, the memory +won't be accessible. So limit zlib and libpng to 64K by defining MAXSEG_64K. + +.SS Configuring for DOS + +For DOS users who only have access to the lower 640K, you will +have to limit zlib's memory usage via a png_set_compression_mem_level() +call. See zlib.h or zconf.h in the zlib library for more information. + +.SS Configuring for Medium Model + +Libpng's support for medium model has been tested on most of the popular +compilers. Make sure MAXSEG_64K gets defined, USE_FAR_KEYWORD gets +defined, and FAR gets defined to far in pngconf.h, and you should be +all set. Everything in the library (except for zlib's structure) is +expecting far data. You must use the typedefs with the p or pp on +the end for pointers (or at least look at them and be careful). Make +note that the rows of data are defined as png_bytepp, which is +an "unsigned char far * far *". + +.SS Configuring for gui/windowing platforms: + +You will need to write new error and warning functions that use the GUI +interface, as described previously, and set them to be the error and +warning functions at the time that png_create_*_struct() is called, +in order to have them available during the structure initialization. +They can be changed later via png_set_error_fn(). On some compilers, +you may also have to change the memory allocators (png_malloc, etc.). + +.SS Configuring for compiler xxx: + +All includes for libpng are in pngconf.h. If you need to add, change +or delete an include, this is the place to do it. +The includes that are not needed outside libpng are placed in pngpriv.h, +which is only used by the routines inside libpng itself. +The files in libpng proper only include pngpriv.h and png.h, which +%14%in turn includes pngconf.h. +in turn includes pngconf.h and, as of libpng-1.5.0, pnglibconf.h. +As of libpng-1.5.0, pngpriv.h also includes three other private header +files, pngstruct.h, pnginfo.h, and pngdebug.h, which contain material +that previously appeared in the public headers. + +.SS Configuring zlib: + +There are special functions to configure the compression. Perhaps the +most useful one changes the compression level, which currently uses +input compression values in the range 0 - 9. The library normally +uses the default compression level (Z_DEFAULT_COMPRESSION = 6). Tests +have shown that for a large majority of images, compression values in +the range 3-6 compress nearly as well as higher levels, and do so much +faster. For online applications it may be desirable to have maximum speed +(Z_BEST_SPEED = 1). With versions of zlib after v0.99, you can also +specify no compression (Z_NO_COMPRESSION = 0), but this would create +files larger than just storing the raw bitmap. You can specify the +compression level by calling: + + #include zlib.h + png_set_compression_level(png_ptr, level); + +Another useful one is to reduce the memory level used by the library. +The memory level defaults to 8, but it can be lowered if you are +short on memory (running DOS, for example, where you only have 640K). +Note that the memory level does have an effect on compression; among +other things, lower levels will result in sections of incompressible +data being emitted in smaller stored blocks, with a correspondingly +larger relative overhead of up to 15% in the worst case. + + #include zlib.h + png_set_compression_mem_level(png_ptr, level); + +The other functions are for configuring zlib. They are not recommended +for normal use and may result in writing an invalid PNG file. See +zlib.h for more information on what these mean. + + #include zlib.h + png_set_compression_strategy(png_ptr, + strategy); + + png_set_compression_window_bits(png_ptr, + window_bits); + + png_set_compression_method(png_ptr, method); + + png_set_compression_buffer_size(png_ptr, size); + +As of libpng version 1.5.4, additional APIs became +available to set these separately for non-IDAT +compressed chunks such as zTXt, iTXt, and iCCP: + + #include zlib.h + #if PNG_LIBPNG_VER >= 10504 + png_set_text_compression_level(png_ptr, level); + + png_set_text_compression_mem_level(png_ptr, level); + + png_set_text_compression_strategy(png_ptr, + strategy); + + png_set_text_compression_window_bits(png_ptr, + window_bits); + + png_set_text_compression_method(png_ptr, method); + #endif + +.SS Controlling row filtering + +If you want to control whether libpng uses filtering or not, which +filters are used, and how it goes about picking row filters, you +can call one of these functions. The selection and configuration +of row filters can have a significant impact on the size and +encoding speed and a somewhat lesser impact on the decoding speed +of an image. Filtering is enabled by default for RGB and grayscale +images (with and without alpha), but not for paletted images nor +for any images with bit depths less than 8 bits/pixel. + +The 'method' parameter sets the main filtering method, which is +currently only '0' in the PNG 1.2 specification. The 'filters' +parameter sets which filter(s), if any, should be used for each +scanline. Possible values are PNG_ALL_FILTERS and PNG_NO_FILTERS +to turn filtering on and off, respectively. + +Individual filter types are PNG_FILTER_NONE, PNG_FILTER_SUB, +PNG_FILTER_UP, PNG_FILTER_AVG, PNG_FILTER_PAETH, which can be bitwise +ORed together with '|' to specify one or more filters to use. +These filters are described in more detail in the PNG specification. +If you intend to change the filter type during the course of writing +the image, you should start with flags set for all of the filters +you intend to use so that libpng can initialize its internal +structures appropriately for all of the filter types. (Note that this +means the first row must always be adaptively filtered, because libpng +currently does not allocate the filter buffers until png_write_row() +is called for the first time.) + + filters = PNG_FILTER_NONE | PNG_FILTER_SUB + PNG_FILTER_UP | PNG_FILTER_AVG | + PNG_FILTER_PAETH | PNG_ALL_FILTERS; + + png_set_filter(png_ptr, PNG_FILTER_TYPE_BASE, + filters); + The second parameter can also be + PNG_INTRAPIXEL_DIFFERENCING if you are + writing a PNG to be embedded in a MNG + datastream. This parameter must be the + same as the value of filter_method used + in png_set_IHDR(). + +It is also possible to influence how libpng chooses from among the +available filters. This is done in one or both of two ways - by +telling it how important it is to keep the same filter for successive +rows, and by telling it the relative computational costs of the filters. + + double weights[3] = {1.5, 1.3, 1.1}, + costs[PNG_FILTER_VALUE_LAST] = + {1.0, 1.3, 1.3, 1.5, 1.7}; + + png_set_filter_heuristics(png_ptr, + PNG_FILTER_HEURISTIC_WEIGHTED, 3, + weights, costs); + +The weights are multiplying factors that indicate to libpng that the +row filter should be the same for successive rows unless another row filter +is that many times better than the previous filter. In the above example, +if the previous 3 filters were SUB, SUB, NONE, the SUB filter could have a +"sum of absolute differences" 1.5 x 1.3 times higher than other filters +and still be chosen, while the NONE filter could have a sum 1.1 times +higher than other filters and still be chosen. Unspecified weights are +taken to be 1.0, and the specified weights should probably be declining +like those above in order to emphasize recent filters over older filters. + +The filter costs specify for each filter type a relative decoding cost +to be considered when selecting row filters. This means that filters +with higher costs are less likely to be chosen over filters with lower +costs, unless their "sum of absolute differences" is that much smaller. +The costs do not necessarily reflect the exact computational speeds of +the various filters, since this would unduly influence the final image +size. + +Note that the numbers above were invented purely for this example and +are given only to help explain the function usage. Little testing has +been done to find optimum values for either the costs or the weights. + +.SS Removing unwanted object code + +There are a bunch of #define's in pngconf.h that control what parts of +libpng are compiled. All the defines end in _SUPPORTED. If you are +never going to use a capability, you can change the #define to #undef +before recompiling libpng and save yourself code and data space, or +you can turn off individual capabilities with defines that begin with +PNG_NO_. + +In libpng-1.5.0 and later, the #define's are in pnglibconf.h instead. + +You can also turn all of the transforms and ancillary chunk capabilities +off en masse with compiler directives that define +PNG_NO_READ[or WRITE]_TRANSFORMS, or PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS, +or all four, +along with directives to turn on any of the capabilities that you do +want. The PNG_NO_READ[or WRITE]_TRANSFORMS directives disable the extra +transformations but still leave the library fully capable of reading +and writing PNG files with all known public chunks. Use of the +PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS directive produces a library +that is incapable of reading or writing ancillary chunks. If you are +not using the progressive reading capability, you can turn that off +with PNG_NO_PROGRESSIVE_READ (don't confuse this with the INTERLACING +capability, which you'll still have). + +All the reading and writing specific code are in separate files, so the +linker should only grab the files it needs. However, if you want to +make sure, or if you are building a stand alone library, all the +reading files start with "pngr" and all the writing files start with "pngw". +The files that don't match either (like png.c, pngtrans.c, etc.) +are used for both reading and writing, and always need to be included. +The progressive reader is in pngpread.c + +If you are creating or distributing a dynamically linked library (a .so +or DLL file), you should not remove or disable any parts of the library, +as this will cause applications linked with different versions of the +library to fail if they call functions not available in your library. +The size of the library itself should not be an issue, because only +those sections that are actually used will be loaded into memory. + +.SS Requesting debug printout + +The macro definition PNG_DEBUG can be used to request debugging +printout. Set it to an integer value in the range 0 to 3. Higher +numbers result in increasing amounts of debugging information. The +information is printed to the "stderr" file, unless another file +name is specified in the PNG_DEBUG_FILE macro definition. + +When PNG_DEBUG > 0, the following functions (macros) become available: + + png_debug(level, message) + png_debug1(level, message, p1) + png_debug2(level, message, p1, p2) + +in which "level" is compared to PNG_DEBUG to decide whether to print +the message, "message" is the formatted string to be printed, +and p1 and p2 are parameters that are to be embedded in the string +according to printf-style formatting directives. For example, + + png_debug1(2, "foo=%d\n", foo); + +is expanded to + + if (PNG_DEBUG > 2) + fprintf(PNG_DEBUG_FILE, "foo=%d\n", foo); + +When PNG_DEBUG is defined but is zero, the macros aren't defined, but you +can still use PNG_DEBUG to control your own debugging: + + #ifdef PNG_DEBUG + fprintf(stderr, ... + #endif + +When PNG_DEBUG = 1, the macros are defined, but only png_debug statements +having level = 0 will be printed. There aren't any such statements in +this version of libpng, but if you insert some they will be printed. + +.SS Prepending a prefix to exported symbols + +Starting with libpng-1.6.0, you can configure libpng (when using the +"configure" script) to prefix all exported symbols by means of the +configuration option "--with-libpng-prefix=FOO_", where FOO_ can be any +string beginning with a letter and containing only uppercase +and lowercase letters, digits, and the underscore (i.e., a C language +identifier). This creates a set of macros in pnglibconf.h, so this is +transparent to applications; their function calls get transformed by +the macros to use the modified names. + +.SH VII. MNG support + +The MNG specification (available at http://www.libpng.org/pub/mng) allows +certain extensions to PNG for PNG images that are embedded in MNG datastreams. +Libpng can support some of these extensions. To enable them, use the +png_permit_mng_features() function: + + feature_set = png_permit_mng_features(png_ptr, mask) + + mask is a png_uint_32 containing the bitwise OR of the + features you want to enable. These include + PNG_FLAG_MNG_EMPTY_PLTE + PNG_FLAG_MNG_FILTER_64 + PNG_ALL_MNG_FEATURES + + feature_set is a png_uint_32 that is the bitwise AND of + your mask with the set of MNG features that is + supported by the version of libpng that you are using. + +It is an error to use this function when reading or writing a standalone +PNG file with the PNG 8-byte signature. The PNG datastream must be wrapped +in a MNG datastream. As a minimum, it must have the MNG 8-byte signature +and the MHDR and MEND chunks. Libpng does not provide support for these +or any other MNG chunks; your application must provide its own support for +them. You may wish to consider using libmng (available at +http://www.libmng.com) instead. + +.SH VIII. Changes to Libpng from version 0.88 + +It should be noted that versions of libpng later than 0.96 are not +distributed by the original libpng author, Guy Schalnat, nor by +Andreas Dilger, who had taken over from Guy during 1996 and 1997, and +distributed versions 0.89 through 0.96, but rather by another member +of the original PNG Group, Glenn Randers-Pehrson. Guy and Andreas are +still alive and well, but they have moved on to other things. + +The old libpng functions png_read_init(), png_write_init(), +png_info_init(), png_read_destroy(), and png_write_destroy() have been +moved to PNG_INTERNAL in version 0.95 to discourage their use. These +functions will be removed from libpng version 1.4.0. + +The preferred method of creating and initializing the libpng structures is +via the png_create_read_struct(), png_create_write_struct(), and +png_create_info_struct() because they isolate the size of the structures +from the application, allow version error checking, and also allow the +use of custom error handling routines during the initialization, which +the old functions do not. The functions png_read_destroy() and +png_write_destroy() do not actually free the memory that libpng +allocated for these structs, but just reset the data structures, so they +can be used instead of png_destroy_read_struct() and +png_destroy_write_struct() if you feel there is too much system overhead +allocating and freeing the png_struct for each image read. + +Setting the error callbacks via png_set_message_fn() before +png_read_init() as was suggested in libpng-0.88 is no longer supported +because this caused applications that do not use custom error functions +to fail if the png_ptr was not initialized to zero. It is still possible +to set the error callbacks AFTER png_read_init(), or to change them with +png_set_error_fn(), which is essentially the same function, but with a new +name to force compilation errors with applications that try to use the old +method. + +Starting with version 1.0.7, you can find out which version of the library +you are using at run-time: + + png_uint_32 libpng_vn = png_access_version_number(); + +The number libpng_vn is constructed from the major version, minor +version with leading zero, and release number with leading zero, +(e.g., libpng_vn for version 1.0.7 is 10007). + +Note that this function does not take a png_ptr, so you can call it +before you've created one. + +You can also check which version of png.h you used when compiling your +application: + + png_uint_32 application_vn = PNG_LIBPNG_VER; + +.SH IX. Changes to Libpng from version 1.0.x to 1.2.x + +Support for user memory management was enabled by default. To +accomplish this, the functions png_create_read_struct_2(), +png_create_write_struct_2(), png_set_mem_fn(), png_get_mem_ptr(), +png_malloc_default(), and png_free_default() were added. + +Support for the iTXt chunk has been enabled by default as of +version 1.2.41. + +Support for certain MNG features was enabled. + +Support for numbered error messages was added. However, we never got +around to actually numbering the error messages. The function +png_set_strip_error_numbers() was added (Note: the prototype for this +function was inadvertently removed from png.h in PNG_NO_ASSEMBLER_CODE +builds of libpng-1.2.15. It was restored in libpng-1.2.36). + +The png_malloc_warn() function was added at libpng-1.2.3. This issues +a png_warning and returns NULL instead of aborting when it fails to +acquire the requested memory allocation. + +Support for setting user limits on image width and height was enabled +by default. The functions png_set_user_limits(), png_get_user_width_max(), +and png_get_user_height_max() were added at libpng-1.2.6. + +The png_set_add_alpha() function was added at libpng-1.2.7. + +The function png_set_expand_gray_1_2_4_to_8() was added at libpng-1.2.9. +Unlike png_set_gray_1_2_4_to_8(), the new function does not expand the +tRNS chunk to alpha. The png_set_gray_1_2_4_to_8() function is +deprecated. + +A number of macro definitions in support of runtime selection of +assembler code features (especially Intel MMX code support) were +added at libpng-1.2.0: + + PNG_ASM_FLAG_MMX_SUPPORT_COMPILED + PNG_ASM_FLAG_MMX_SUPPORT_IN_CPU + PNG_ASM_FLAG_MMX_READ_COMBINE_ROW + PNG_ASM_FLAG_MMX_READ_INTERLACE + PNG_ASM_FLAG_MMX_READ_FILTER_SUB + PNG_ASM_FLAG_MMX_READ_FILTER_UP + PNG_ASM_FLAG_MMX_READ_FILTER_AVG + PNG_ASM_FLAG_MMX_READ_FILTER_PAETH + PNG_ASM_FLAGS_INITIALIZED + PNG_MMX_READ_FLAGS + PNG_MMX_FLAGS + PNG_MMX_WRITE_FLAGS + PNG_MMX_FLAGS + +We added the following functions in support of runtime +selection of assembler code features: + + png_get_mmx_flagmask() + png_set_mmx_thresholds() + png_get_asm_flags() + png_get_mmx_bitdepth_threshold() + png_get_mmx_rowbytes_threshold() + png_set_asm_flags() + +We replaced all of these functions with simple stubs in libpng-1.2.20, +when the Intel assembler code was removed due to a licensing issue. + +These macros are deprecated: + + PNG_READ_TRANSFORMS_NOT_SUPPORTED + PNG_PROGRESSIVE_READ_NOT_SUPPORTED + PNG_NO_SEQUENTIAL_READ_SUPPORTED + PNG_WRITE_TRANSFORMS_NOT_SUPPORTED + PNG_READ_ANCILLARY_CHUNKS_NOT_SUPPORTED + PNG_WRITE_ANCILLARY_CHUNKS_NOT_SUPPORTED + +They have been replaced, respectively, by: + + PNG_NO_READ_TRANSFORMS + PNG_NO_PROGRESSIVE_READ + PNG_NO_SEQUENTIAL_READ + PNG_NO_WRITE_TRANSFORMS + PNG_NO_READ_ANCILLARY_CHUNKS + PNG_NO_WRITE_ANCILLARY_CHUNKS + +PNG_MAX_UINT was replaced with PNG_UINT_31_MAX. It has been +deprecated since libpng-1.0.16 and libpng-1.2.6. + +The function + png_check_sig(sig, num) +was replaced with + !png_sig_cmp(sig, 0, num) +It has been deprecated since libpng-0.90. + +The function + png_set_gray_1_2_4_to_8() +which also expands tRNS to alpha was replaced with + png_set_expand_gray_1_2_4_to_8() +which does not. It has been deprecated since libpng-1.0.18 and 1.2.9. + +.SH X. Changes to Libpng from version 1.0.x/1.2.x to 1.4.x + +Private libpng prototypes and macro definitions were moved from +png.h and pngconf.h into a new pngpriv.h header file. + +Functions png_set_benign_errors(), png_benign_error(), and +png_chunk_benign_error() were added. + +Support for setting the maximum amount of memory that the application +will allocate for reading chunks was added, as a security measure. +The functions png_set_chunk_cache_max() and png_get_chunk_cache_max() +were added to the library. + +We implemented support for I/O states by adding png_ptr member io_state +and functions png_get_io_chunk_name() and png_get_io_state() in pngget.c + +We added PNG_TRANSFORM_GRAY_TO_RGB to the available high-level +input transforms. + +Checking for and reporting of errors in the IHDR chunk is more thorough. + +Support for global arrays was removed, to improve thread safety. + +Some obsolete/deprecated macros and functions have been removed. + +Typecasted NULL definitions such as + #define png_voidp_NULL (png_voidp)NULL +were eliminated. If you used these in your application, just use +NULL instead. + +The png_struct and info_struct members "trans" and "trans_values" were +changed to "trans_alpha" and "trans_color", respectively. + +The obsolete, unused pnggccrd.c and pngvcrd.c files and related makefiles +were removed. + +The PNG_1_0_X and PNG_1_2_X macros were eliminated. + +The PNG_LEGACY_SUPPORTED macro was eliminated. + +Many WIN32_WCE #ifdefs were removed. + +The functions png_read_init(info_ptr), png_write_init(info_ptr), +png_info_init(info_ptr), png_read_destroy(), and png_write_destroy() +have been removed. They have been deprecated since libpng-0.95. + +The png_permit_empty_plte() was removed. It has been deprecated +since libpng-1.0.9. Use png_permit_mng_features() instead. + +We removed the obsolete stub functions png_get_mmx_flagmask(), +png_set_mmx_thresholds(), png_get_asm_flags(), +png_get_mmx_bitdepth_threshold(), png_get_mmx_rowbytes_threshold(), +png_set_asm_flags(), and png_mmx_supported() + +We removed the obsolete png_check_sig(), png_memcpy_check(), and +png_memset_check() functions. Instead use !png_sig_cmp(), memcpy(), +and memset(), respectively. + +The function png_set_gray_1_2_4_to_8() was removed. It has been +deprecated since libpng-1.0.18 and 1.2.9, when it was replaced with +png_set_expand_gray_1_2_4_to_8() because the former function also +expanded any tRNS chunk to an alpha channel. + +Macros for png_get_uint_16, png_get_uint_32, and png_get_int_32 +were added and are used by default instead of the corresponding +functions. Unfortunately, +from libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the +function) incorrectly returned a value of type png_uint_32. + +We changed the prototype for png_malloc() from + png_malloc(png_structp png_ptr, png_uint_32 size) +to + png_malloc(png_structp png_ptr, png_alloc_size_t size) + +This also applies to the prototype for the user replacement malloc_fn(). + +The png_calloc() function was added and is used in place of +of "png_malloc(); memset();" except in the case in png_read_png() +where the array consists of pointers; in this case a "for" loop is used +after the png_malloc() to set the pointers to NULL, to give robust. +behavior in case the application runs out of memory part-way through +the process. + +We changed the prototypes of png_get_compression_buffer_size() and +png_set_compression_buffer_size() to work with png_size_t instead of +png_uint_32. + +Support for numbered error messages was removed by default, since we +never got around to actually numbering the error messages. The function +png_set_strip_error_numbers() was removed from the library by default. + +The png_zalloc() and png_zfree() functions are no longer exported. +The png_zalloc() function no longer zeroes out the memory that it +allocates. Applications that called png_zalloc(png_ptr, number, size) +can call png_calloc(png_ptr, number*size) instead, and can call +png_free() instead of png_zfree(). + +Support for dithering was disabled by default in libpng-1.4.0, because +it has not been well tested and doesn't actually "dither". +The code was not +removed, however, and could be enabled by building libpng with +PNG_READ_DITHER_SUPPORTED defined. In libpng-1.4.2, this support +was reenabled, but the function was renamed png_set_quantize() to +reflect more accurately what it actually does. At the same time, +the PNG_DITHER_[RED,GREEN_BLUE]_BITS macros were also renamed to +PNG_QUANTIZE_[RED,GREEN,BLUE]_BITS, and PNG_READ_DITHER_SUPPORTED +was renamed to PNG_READ_QUANTIZE_SUPPORTED. + +We removed the trailing '.' from the warning and error messages. + +.SH XI. Changes to Libpng from version 1.4.x to 1.5.x + +From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the +function) incorrectly returned a value of type png_uint_32. + +Checking for invalid palette index on read or write was added at libpng +1.5.10. When an invalid index is found, libpng issues a benign error. +This is enabled by default because this condition is an error according +to the PNG specification, Clause 11.3.2, but the error can be ignored in +each png_ptr with + + png_set_check_for_invalid_index(png_ptr, allowed); + + allowed - one of + 0: disable benign error (accept the + invalid data without warning). + 1: enable benign error (treat the + invalid data as an error or a + warning). + +If the error is ignored, or if png_benign_error() treats it as a warning, +any invalid pixels are decoded as opaque black by the decoder and written +as-is by the encoder. + +Retrieving the maximum palette index found was added at libpng-1.5.15. +This statement must appear after png_read_png() or png_read_image() while +reading, and after png_write_png() or png_write_image() while writing. + + int max_palette = png_get_palette_max(png_ptr, info_ptr); + +This will return the maximum palette index found in the image, or "-1" if +the palette was not checked, or "0" if no palette was found. Note that this +does not account for any palette index used by ancillary chunks such as the +bKGD chunk; you must check those separately to determine the maximum +palette index actually used. + +A. Changes that affect users of libpng + +There are no substantial API changes between the non-deprecated parts of +the 1.4.5 API and the 1.5.0 API; however, the ability to directly access +members of the main libpng control structures, png_struct and png_info, +deprecated in earlier versions of libpng, has been completely removed from +libpng 1.5. + +We no longer include zlib.h in png.h. The include statement has been moved +to pngstruct.h, where it is not accessible by applications. Applications that +need access to information in zlib.h will need to add the '#include "zlib.h"' +directive. It does not matter whether this is placed prior to or after +the '"#include png.h"' directive. + +The png_sprintf(), png_strcpy(), and png_strncpy() macros are no longer used +and were removed. + +We moved the png_strlen(), png_memcpy(), png_memset(), and png_memcmp() +macros into a private header file (pngpriv.h) that is not accessible to +applications. + +In png_get_iCCP, the type of "profile" was changed from png_charpp +to png_bytepp, and in png_set_iCCP, from png_charp to png_const_bytep. + +There are changes of form in png.h, including new and changed macros to +declare parts of the API. Some API functions with arguments that are +pointers to data not modified within the function have been corrected to +declare these arguments with PNG_CONST. + +Much of the internal use of C macros to control the library build has also +changed and some of this is visible in the exported header files, in +particular the use of macros to control data and API elements visible +during application compilation may require significant revision to +application code. (It is extremely rare for an application to do this.) + +Any program that compiled against libpng 1.4 and did not use deprecated +features or access internal library structures should compile and work +against libpng 1.5, except for the change in the prototype for +png_get_iCCP() and png_set_iCCP() API functions mentioned above. + +libpng 1.5.0 adds PNG_ PASS macros to help in the reading and writing of +interlaced images. The macros return the number of rows and columns in +each pass and information that can be used to de-interlace and (if +absolutely necessary) interlace an image. + +libpng 1.5.0 adds an API png_longjmp(png_ptr, value). This API calls +the application-provided png_longjmp_ptr on the internal, but application +initialized, longjmp buffer. It is provided as a convenience to avoid +the need to use the png_jmpbuf macro, which had the unnecessary side +effect of resetting the internal png_longjmp_ptr value. + +libpng 1.5.0 includes a complete fixed point API. By default this is +present along with the corresponding floating point API. In general the +fixed point API is faster and smaller than the floating point one because +the PNG file format used fixed point, not floating point. This applies +even if the library uses floating point in internal calculations. A new +macro, PNG_FLOATING_ARITHMETIC_SUPPORTED, reveals whether the library +uses floating point arithmetic (the default) or fixed point arithmetic +internally for performance critical calculations such as gamma correction. +In some cases, the gamma calculations may produce slightly different +results. This has changed the results in png_rgb_to_gray and in alpha +composition (png_set_background for example). This applies even if the +original image was already linear (gamma == 1.0) and, therefore, it is +not necessary to linearize the image. This is because libpng has *not* +been changed to optimize that case correctly, yet. + +Fixed point support for the sCAL chunk comes with an important caveat; +the sCAL specification uses a decimal encoding of floating point values +and the accuracy of PNG fixed point values is insufficient for +representation of these values. Consequently a "string" API +(png_get_sCAL_s and png_set_sCAL_s) is the only reliable way of reading +arbitrary sCAL chunks in the absence of either the floating point API or +internal floating point calculations. + +Applications no longer need to include the optional distribution header +file pngusr.h or define the corresponding macros during application +build in order to see the correct variant of the libpng API. From 1.5.0 +application code can check for the corresponding _SUPPORTED macro: + +#ifdef PNG_INCH_CONVERSIONS_SUPPORTED + /* code that uses the inch conversion APIs. */ +#endif + +This macro will only be defined if the inch conversion functions have been +compiled into libpng. The full set of macros, and whether or not support +has been compiled in, are available in the header file pnglibconf.h. +This header file is specific to the libpng build. Notice that prior to +1.5.0 the _SUPPORTED macros would always have the default definition unless +reset by pngusr.h or by explicit settings on the compiler command line. +These settings may produce compiler warnings or errors in 1.5.0 because +of macro redefinition. + +From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the +function) incorrectly returned a value of type png_uint_32. libpng 1.5.0 +is consistent with the implementation in 1.4.5 and 1.2.x (where the macro +did not exist.) + +Applications can now choose whether to use these macros or to call the +corresponding function by defining PNG_USE_READ_MACROS or +PNG_NO_USE_READ_MACROS before including png.h. Notice that this is +only supported from 1.5.0 -defining PNG_NO_USE_READ_MACROS prior to 1.5.0 +will lead to a link failure. + +Prior to libpng-1.5.4, the zlib compressor used the same set of parameters +when compressing the IDAT data and textual data such as zTXt and iCCP. +In libpng-1.5.4 we reinitialized the zlib stream for each type of data. +We added five png_set_text_*() functions for setting the parameters to +use with textual data. + +Prior to libpng-1.5.4, the PNG_READ_16_TO_8_ACCURATE_SCALE_SUPPORTED +option was off by default, and slightly inaccurate scaling occurred. +This option can no longer be turned off, and the choice of accurate +or inaccurate 16-to-8 scaling is by using the new png_set_scale_16_to_8() +API for accurate scaling or the old png_set_strip_16_to_8() API for simple +chopping. + +Prior to libpng-1.5.4, the png_set_user_limits() function could only be +used to reduce the width and height limits from the value of +PNG_USER_WIDTH_MAX and PNG_USER_HEIGHT_MAX, although this document said +that it could be used to override them. Now this function will reduce or +increase the limits. + +Starting in libpng-1.5.10, the user limits can be set en masse with the +configuration option PNG_SAFE_LIMITS_SUPPORTED. If this option is enabled, +a set of "safe" limits is applied in pngpriv.h. These can be overridden by +application calls to png_set_user_limits(), png_set_user_chunk_cache_max(), +and/or png_set_user_malloc_max() that increase or decrease the limits. Also, +in libpng-1.5.10 the default width and height limits were increased +from 1,000,000 to 0x7ffffff (i.e., made unlimited). Therefore, the +limits are now + default safe + png_user_width_max 0x7fffffff 1,000,000 + png_user_height_max 0x7fffffff 1,000,000 + png_user_chunk_cache_max 0 (unlimited) 128 + png_user_chunk_malloc_max 0 (unlimited) 8,000,000 + +B. Changes to the build and configuration of libpng + +Details of internal changes to the library code can be found in the CHANGES +file and in the GIT repository logs. These will be of no concern to the vast +majority of library users or builders; however, the few who configure libpng +to a non-default feature set may need to change how this is done. + +There should be no need for library builders to alter build scripts if +these use the distributed build support - configure or the makefiles - +however, users of the makefiles may care to update their build scripts +to build pnglibconf.h where the corresponding makefile does not do so. + +Building libpng with a non-default configuration has changed completely. +The old method using pngusr.h should still work correctly even though the +way pngusr.h is used in the build has been changed; however, library +builders will probably want to examine the changes to take advantage of +new capabilities and to simplify their build system. + +B.1 Specific changes to library configuration capabilities + +The library now supports a complete fixed point implementation and can +thus be used on systems that have no floating point support or very +limited or slow support. Previously gamma correction, an essential part +of complete PNG support, required reasonably fast floating point. + +As part of this the choice of internal implementation has been made +independent of the choice of fixed versus floating point APIs and all the +missing fixed point APIs have been implemented. + +The exact mechanism used to control attributes of API functions has +changed. A single set of operating system independent macro definitions +is used and operating system specific directives are defined in +pnglibconf.h + +As part of this the mechanism used to choose procedure call standards on +those systems that allow a choice has been changed. At present this only +affects certain Microsoft (DOS, Windows) and IBM (OS/2) operating systems +running on Intel processors. As before, PNGAPI is defined where required +to control the exported API functions; however, two new macros, PNGCBAPI +and PNGCAPI, are used instead for callback functions (PNGCBAPI) and +(PNGCAPI) for functions that must match a C library prototype (currently +only png_longjmp_ptr, which must match the C longjmp function.) The new +approach is documented in pngconf.h + +Despite these changes, libpng 1.5.0 only supports the native C function +calling standard on those platforms tested so far (__cdecl on Microsoft +Windows). This is because the support requirements for alternative +calling conventions seem to no longer exist. Developers who find it +necessary to set PNG_API_RULE to 1 should advise the mailing list +(png-mng-implement) of this and library builders who use Openwatcom and +therefore set PNG_API_RULE to 2 should also contact the mailing list. + +A new test program, pngvalid, is provided in addition to pngtest. +pngvalid validates the arithmetic accuracy of the gamma correction +calculations and includes a number of validations of the file format. +A subset of the full range of tests is run when "make check" is done +(in the 'configure' build.) pngvalid also allows total allocated memory +usage to be evaluated and performs additional memory overwrite validation. + +Many changes to individual feature macros have been made. The following +are the changes most likely to be noticed by library builders who +configure libpng: + +1) All feature macros now have consistent naming: + +#define PNG_NO_feature turns the feature off +#define PNG_feature_SUPPORTED turns the feature on + +pnglibconf.h contains one line for each feature macro which is either: + +#define PNG_feature_SUPPORTED + +if the feature is supported or: + +/*#undef PNG_feature_SUPPORTED*/ + +if it is not. Library code consistently checks for the 'SUPPORTED' macro. +It does not, and libpng applications should not, check for the 'NO' macro +which will not normally be defined even if the feature is not supported. +The 'NO' macros are only used internally for setting or not setting the +corresponding 'SUPPORTED' macros. + +Compatibility with the old names is provided as follows: + +PNG_INCH_CONVERSIONS turns on PNG_INCH_CONVERSIONS_SUPPORTED + +And the following definitions disable the corresponding feature: + +PNG_SETJMP_NOT_SUPPORTED disables SETJMP +PNG_READ_TRANSFORMS_NOT_SUPPORTED disables READ_TRANSFORMS +PNG_NO_READ_COMPOSITED_NODIV disables READ_COMPOSITE_NODIV +PNG_WRITE_TRANSFORMS_NOT_SUPPORTED disables WRITE_TRANSFORMS +PNG_READ_ANCILLARY_CHUNKS_NOT_SUPPORTED disables READ_ANCILLARY_CHUNKS +PNG_WRITE_ANCILLARY_CHUNKS_NOT_SUPPORTED disables WRITE_ANCILLARY_CHUNKS + +Library builders should remove use of the above, inconsistent, names. + +2) Warning and error message formatting was previously conditional on +the STDIO feature. The library has been changed to use the +CONSOLE_IO feature instead. This means that if CONSOLE_IO is disabled +the library no longer uses the printf(3) functions, even though the +default read/write implementations use (FILE) style stdio.h functions. + +3) Three feature macros now control the fixed/floating point decisions: + +PNG_FLOATING_POINT_SUPPORTED enables the floating point APIs + +PNG_FIXED_POINT_SUPPORTED enables the fixed point APIs; however, in +practice these are normally required internally anyway (because the PNG +file format is fixed point), therefore in most cases PNG_NO_FIXED_POINT +merely stops the function from being exported. + +PNG_FLOATING_ARITHMETIC_SUPPORTED chooses between the internal floating +point implementation or the fixed point one. Typically the fixed point +implementation is larger and slower than the floating point implementation +on a system that supports floating point; however, it may be faster on a +system which lacks floating point hardware and therefore uses a software +emulation. + +4) Added PNG_{READ,WRITE}_INT_FUNCTIONS_SUPPORTED. This allows the +functions to read and write ints to be disabled independently of +PNG_USE_READ_MACROS, which allows libpng to be built with the functions +even though the default is to use the macros - this allows applications +to choose at app buildtime whether or not to use macros (previously +impossible because the functions weren't in the default build.) + +B.2 Changes to the configuration mechanism + +Prior to libpng-1.5.0 library builders who needed to configure libpng +had either to modify the exported pngconf.h header file to add system +specific configuration or had to write feature selection macros into +pngusr.h and cause this to be included into pngconf.h by defining +PNG_USER_CONFIG. The latter mechanism had the disadvantage that an +application built without PNG_USER_CONFIG defined would see the +unmodified, default, libpng API and thus would probably fail to link. + +These mechanisms still work in the configure build and in any makefile +build that builds pnglibconf.h, although the feature selection macros +have changed somewhat as described above. In 1.5.0, however, pngusr.h is +processed only once, when the exported header file pnglibconf.h is built. +pngconf.h no longer includes pngusr.h, therefore pngusr.h is ignored after the +build of pnglibconf.h and it is never included in an application build. + +The rarely used alternative of adding a list of feature macros to the +CFLAGS setting in the build also still works; however, the macros will be +copied to pnglibconf.h and this may produce macro redefinition warnings +when the individual C files are compiled. + +All configuration now only works if pnglibconf.h is built from +scripts/pnglibconf.dfa. This requires the program awk. Brian Kernighan +(the original author of awk) maintains C source code of that awk and this +and all known later implementations (often called by subtly different +names - nawk and gawk for example) are adequate to build pnglibconf.h. +The Sun Microsystems (now Oracle) program 'awk' is an earlier version +and does not work; this may also apply to other systems that have a +functioning awk called 'nawk'. + +Configuration options are now documented in scripts/pnglibconf.dfa. This +file also includes dependency information that ensures a configuration is +consistent; that is, if a feature is switched off dependent features are +also removed. As a recommended alternative to using feature macros in +pngusr.h a system builder may also define equivalent options in pngusr.dfa +(or, indeed, any file) and add that to the configuration by setting +DFA_XTRA to the file name. The makefiles in contrib/pngminim illustrate +how to do this, and a case where pngusr.h is still required. + +.SH XII. Changes to Libpng from version 1.5.x to 1.6.x + +A "simplified API" has been added (see documentation in png.h and a simple +example in contrib/examples/pngtopng.c). The new publicly visible API +includes the following: + + macros: + PNG_FORMAT_* + PNG_IMAGE_* + structures: + png_control + png_image + read functions + png_image_begin_read_from_file() + png_image_begin_read_from_stdio() + png_image_begin_read_from_memory() + png_image_finish_read() + png_image_free() + write functions + png_image_write_to_file() + png_image_write_to_stdio() + +Starting with libpng-1.6.0, you can configure libpng to prefix all exported +symbols, using the PNG_PREFIX macro. + +We no longer include string.h in png.h. The include statement has been moved +to pngpriv.h, where it is not accessible by applications. Applications that +need access to information in string.h must add an '#include "string.h"' +directive. It does not matter whether this is placed prior to or after +the '"#include png.h"' directive. + +The following API are now DEPRECATED: + png_info_init_3() + png_convert_to_rfc1123() which has been replaced + with png_convert_to_rfc1123_buffer() + png_data_freer() + png_malloc_default() + png_free_default() + png_reset_zstream() + +The following have been removed: + png_get_io_chunk_name(), which has been replaced + with png_get_io_chunk_type(). The new + function returns a 32-bit integer instead of + a string. + The png_sizeof(), png_strlen(), png_memcpy(), png_memcmp(), and + png_memset() macros are no longer used in the libpng sources and + have been removed. These had already been made invisible to applications + (i.e., defined in the private pngpriv.h header file) since libpng-1.5.0. + +The signatures of many exported functions were changed, such that + png_structp became png_structrp or png_const_structrp + png_infop became png_inforp or png_const_inforp +where "rp" indicates a "restricted pointer". + +Error detection in some chunks has improved; in particular the iCCP chunk +reader now does pretty complete validation of the basic format. Some bad +profiles that were previously accepted are now rejected, in particular the +very old broken Microsoft/HP sRGB profile. The PNG spec requirement that +only grayscale profiles may appear in images with color type 0 or 4 and that +even if the image only contains gray pixels, only RGB profiles may appear +in images with color type 2, 3, or 6, is now enforced. The sRGB chunk +is allowed to appear in images with any color type. + +The library now issues an error if the application attempts to set a +transform after it calls png_read_update_info(). + +The library now issues a warning if both background processing and RGB to +gray are used when gamma correction happens. As with previous versions of +the library the results are numerically very incorrect in this case. + +There are some minor arithmetic changes in some transforms such as +png_set_background(), that might be detected by certain regression tests. + +Unknown chunk handling has been improved internally, without any API change. +This adds more correct option control of the unknown handling, corrects +a pre-existing bug where the per-chunk 'keep' setting is ignored, and makes +it possible to skip IDAT chunks in the sequential reader. + +The machine-generated configure files are no longer included in branches +libpng16 and later of the GIT repository. They continue to be included +in the tarball releases, however. + +.SH XIII. Detecting libpng + +The png_get_io_ptr() function has been present since libpng-0.88, has never +changed, and is unaffected by conditional compilation macros. It is the +best choice for use in configure scripts for detecting the presence of any +libpng version since 0.88. In an autoconf "configure.in" you could use + + AC_CHECK_LIB(png, png_get_io_ptr, ... + +.SH XV. Source code repository + +Since about February 2009, version 1.2.34, libpng has been under "git" source +control. The git repository was built from old libpng-x.y.z.tar.gz files +going back to version 0.70. You can access the git repository (read only) +at + + git://git.code.sf.net/p/libpng/code + +or you can browse it with a web browser by selecting the "code" button at + + https://sourceforge.net/projects/libpng + +Patches can be sent to glennrp at users.sourceforge.net or to +png-mng-implement at lists.sourceforge.net or you can upload them to +the libpng bug tracker at + + http://libpng.sourceforge.net + +We also accept patches built from the tar or zip distributions, and +simple verbal discriptions of bug fixes, reported either to the +SourceForge bug tracker, to the png-mng-implement at lists.sf.net +mailing list, or directly to glennrp. + +.SH XV. Coding style + +Our coding style is similar to the "Allman" style, with curly +braces on separate lines: + + if (condition) + { + action; + } + + else if (another condition) + { + another action; + } + +The braces can be omitted from simple one-line actions: + + if (condition) + return (0); + +We use 3-space indentation, except for continued statements which +are usually indented the same as the first line of the statement +plus four more spaces. + +For macro definitions we use 2-space indentation, always leaving the "#" +in the first column. + + #ifndef PNG_NO_FEATURE + # ifndef PNG_FEATURE_SUPPORTED + # define PNG_FEATURE_SUPPORTED + # endif + #endif + +Comments appear with the leading "/*" at the same indentation as +the statement that follows the comment: + + /* Single-line comment */ + statement; + + /* This is a multiple-line + * comment. + */ + statement; + +Very short comments can be placed after the end of the statement +to which they pertain: + + statement; /* comment */ + +We don't use C++ style ("//") comments. We have, however, +used them in the past in some now-abandoned MMX assembler +code. + +Functions and their curly braces are not indented, and +exported functions are marked with PNGAPI: + + /* This is a public function that is visible to + * application programmers. It does thus-and-so. + */ + void PNGAPI + png_exported_function(png_ptr, png_info, foo) + { + body; + } + +The prototypes for all exported functions appear in png.h, +above the comment that says + + /* Maintainer: Put new public prototypes here ... */ + +We mark all non-exported functions with "/* PRIVATE */"": + + void /* PRIVATE */ + png_non_exported_function(png_ptr, png_info, foo) + { + body; + } + +The prototypes for non-exported functions (except for those in +pngtest) appear in +pngpriv.h +above the comment that says + + /* Maintainer: Put new private prototypes here ^ */ + +We put a space after the "sizeof" operator and we omit the +optional parentheses around its argument when the argument +is an expression, not a type name, and we always enclose the +sizeof operator, with its argument, in parentheses: + + (sizeof (png_uint_32)) + (sizeof array) + +Prior to libpng-1.6.0 we used a "png_sizeof()" macro, formatted as +though it were a function. + +To avoid polluting the global namespace, the names of all exported +functions and variables begin with "png_", and all publicly visible C +preprocessor macros begin with "PNG". We request that applications that +use libpng *not* begin any of their own symbols with either of these strings. + +We put a space after each comma and after each semicolon +in "for" statements, and we put spaces before and after each +C binary operator and after "for" or "while", and before +"?". We don't put a space between a typecast and the expression +being cast, nor do we put one between a function name and the +left parenthesis that follows it: + + for (i = 2; i > 0; --i) + y[i] = a(x) + (int)b; + +We prefer #ifdef and #ifndef to #if defined() and #if !defined() +when there is only one macro being tested. We always use parentheses +with "defined". + +We prefer to express integers that are used as bit masks in hex format, +with an even number of lower-case hex digits (e.g., 0x00, 0xff, 0x0100). + +We prefer to use underscores in variable names rather than camelCase, except +for a few type names that we inherit from zlib.h. + +We do not use the TAB character for indentation in the C sources. + +Lines do not exceed 80 characters. + +Other rules can be inferred by inspecting the libpng source. + +.SH XVI. Y2K Compliance in libpng + +April 25, 2013 + +Since the PNG Development group is an ad-hoc body, we can't make +an official declaration. + +This is your unofficial assurance that libpng from version 0.71 and +upward through 1.6.2 are Y2K compliant. It is my belief that earlier +versions were also Y2K compliant. + +Libpng only has two year fields. One is a 2-byte unsigned integer +that will hold years up to 65535. The other, which is deprecated, +holds the date in text format, and will hold years up to 9999. + +The integer is + "png_uint_16 year" in png_time_struct. + +The string is + "char time_buffer[29]" in png_struct. This is no longer used +in libpng-1.6.x and will be removed from libpng-1.7.0. + +There are seven time-related functions: + + png_convert_to_rfc_1123() in png.c + (formerly png_convert_to_rfc_1152() in error) + png_convert_from_struct_tm() in pngwrite.c, called + in pngwrite.c + png_convert_from_time_t() in pngwrite.c + png_get_tIME() in pngget.c + png_handle_tIME() in pngrutil.c, called in pngread.c + png_set_tIME() in pngset.c + png_write_tIME() in pngwutil.c, called in pngwrite.c + +All appear to handle dates properly in a Y2K environment. The +png_convert_from_time_t() function calls gmtime() to convert from system +clock time, which returns (year - 1900), which we properly convert to +the full 4-digit year. There is a possibility that applications using +libpng are not passing 4-digit years into the png_convert_to_rfc_1123() +function, or that they are incorrectly passing only a 2-digit year +instead of "year - 1900" into the png_convert_from_struct_tm() function, +but this is not under our control. The libpng documentation has always +stated that it works with 4-digit years, and the APIs have been +documented as such. + +The tIME chunk itself is also Y2K compliant. It uses a 2-byte unsigned +integer to hold the year, and can hold years as large as 65535. + +zlib, upon which libpng depends, is also Y2K compliant. It contains +no date-related code. + + + Glenn Randers-Pehrson + libpng maintainer + PNG Development Group + +.SH NOTE + +Note about libpng version numbers: + +Due to various miscommunications, unforeseen code incompatibilities +and occasional factors outside the authors' control, version numbering +on the library has not always been consistent and straightforward. +The following table summarizes matters since version 0.89c, which was +the first widely used release: + + source png.h png.h shared-lib + version string int version + ------- ------ ----- ---------- + 0.89c ("beta 3") 0.89 89 1.0.89 + 0.90 ("beta 4") 0.90 90 0.90 + 0.95 ("beta 5") 0.95 95 0.95 + 0.96 ("beta 6") 0.96 96 0.96 + 0.97b ("beta 7") 1.00.97 97 1.0.1 + 0.97c 0.97 97 2.0.97 + 0.98 0.98 98 2.0.98 + 0.99 0.99 98 2.0.99 + 0.99a-m 0.99 99 2.0.99 + 1.00 1.00 100 2.1.0 + 1.0.0 1.0.0 100 2.1.0 + 1.0.0 (from here on, the 100 2.1.0 + 1.0.1 png.h string is 10001 2.1.0 + 1.0.1a-e identical to the 10002 from here on, the + 1.0.2 source version) 10002 shared library is 2.V + 1.0.2a-b 10003 where V is the source + 1.0.1 10001 code version except as + 1.0.1a-e 10002 2.1.0.1a-e noted. + 1.0.2 10002 2.1.0.2 + 1.0.2a-b 10003 2.1.0.2a-b + 1.0.3 10003 2.1.0.3 + 1.0.3a-d 10004 2.1.0.3a-d + 1.0.4 10004 2.1.0.4 + 1.0.4a-f 10005 2.1.0.4a-f + 1.0.5 (+ 2 patches) 10005 2.1.0.5 + 1.0.5a-d 10006 2.1.0.5a-d + 1.0.5e-r 10100 2.1.0.5e-r + 1.0.5s-v 10006 2.1.0.5s-v + 1.0.6 (+ 3 patches) 10006 2.1.0.6 + 1.0.6d-g 10007 2.1.0.6d-g + 1.0.6h 10007 10.6h + 1.0.6i 10007 10.6i + 1.0.6j 10007 2.1.0.6j + 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 + 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 + 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 + 1.0.7 1 10007 2.1.0.7 + 1.0.8beta1-4 1 10008 2.1.0.8beta1-4 + 1.0.8rc1 1 10008 2.1.0.8rc1 + 1.0.8 1 10008 2.1.0.8 + 1.0.9beta1-6 1 10009 2.1.0.9beta1-6 + 1.0.9rc1 1 10009 2.1.0.9rc1 + 1.0.9beta7-10 1 10009 2.1.0.9beta7-10 + 1.0.9rc2 1 10009 2.1.0.9rc2 + 1.0.9 1 10009 2.1.0.9 + 1.0.10beta1 1 10010 2.1.0.10beta1 + 1.0.10rc1 1 10010 2.1.0.10rc1 + 1.0.10 1 10010 2.1.0.10 + 1.0.11beta1-3 1 10011 2.1.0.11beta1-3 + 1.0.11rc1 1 10011 2.1.0.11rc1 + 1.0.11 1 10011 2.1.0.11 + 1.0.12beta1-2 2 10012 2.1.0.12beta1-2 + 1.0.12rc1 2 10012 2.1.0.12rc1 + 1.0.12 2 10012 2.1.0.12 + 1.1.0a-f - 10100 2.1.1.0a-f abandoned + 1.2.0beta1-2 2 10200 2.1.2.0beta1-2 + 1.2.0beta3-5 3 10200 3.1.2.0beta3-5 + 1.2.0rc1 3 10200 3.1.2.0rc1 + 1.2.0 3 10200 3.1.2.0 + 1.2.1beta-4 3 10201 3.1.2.1beta1-4 + 1.2.1rc1-2 3 10201 3.1.2.1rc1-2 + 1.2.1 3 10201 3.1.2.1 + 1.2.2beta1-6 12 10202 12.so.0.1.2.2beta1-6 + 1.0.13beta1 10 10013 10.so.0.1.0.13beta1 + 1.0.13rc1 10 10013 10.so.0.1.0.13rc1 + 1.2.2rc1 12 10202 12.so.0.1.2.2rc1 + 1.0.13 10 10013 10.so.0.1.0.13 + 1.2.2 12 10202 12.so.0.1.2.2 + 1.2.3rc1-6 12 10203 12.so.0.1.2.3rc1-6 + 1.2.3 12 10203 12.so.0.1.2.3 + 1.2.4beta1-3 13 10204 12.so.0.1.2.4beta1-3 + 1.2.4rc1 13 10204 12.so.0.1.2.4rc1 + 1.0.14 10 10014 10.so.0.1.0.14 + 1.2.4 13 10204 12.so.0.1.2.4 + 1.2.5beta1-2 13 10205 12.so.0.1.2.5beta1-2 + 1.0.15rc1 10 10015 10.so.0.1.0.15rc1 + 1.0.15 10 10015 10.so.0.1.0.15 + 1.2.5 13 10205 12.so.0.1.2.5 + 1.2.6beta1-4 13 10206 12.so.0.1.2.6beta1-4 + 1.2.6rc1-5 13 10206 12.so.0.1.2.6rc1-5 + 1.0.16 10 10016 10.so.0.1.0.16 + 1.2.6 13 10206 12.so.0.1.2.6 + 1.2.7beta1-2 13 10207 12.so.0.1.2.7beta1-2 + 1.0.17rc1 10 10017 12.so.0.1.0.17rc1 + 1.2.7rc1 13 10207 12.so.0.1.2.7rc1 + 1.0.17 10 10017 12.so.0.1.0.17 + 1.2.7 13 10207 12.so.0.1.2.7 + 1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5 + 1.0.18rc1-5 10 10018 12.so.0.1.0.18rc1-5 + 1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5 + 1.0.18 10 10018 12.so.0.1.0.18 + 1.2.8 13 10208 12.so.0.1.2.8 + 1.2.9beta1-3 13 10209 12.so.0.1.2.9beta1-3 + 1.2.9beta4-11 13 10209 12.so.0.9[.0] + 1.2.9rc1 13 10209 12.so.0.9[.0] + 1.2.9 13 10209 12.so.0.9[.0] + 1.2.10beta1-7 13 10210 12.so.0.10[.0] + 1.2.10rc1-2 13 10210 12.so.0.10[.0] + 1.2.10 13 10210 12.so.0.10[.0] + 1.4.0beta1-6 14 10400 14.so.0.0[.0] + 1.2.11beta1-4 13 10210 12.so.0.11[.0] + 1.4.0beta7-8 14 10400 14.so.0.0[.0] + 1.2.11 13 10211 12.so.0.11[.0] + 1.2.12 13 10212 12.so.0.12[.0] + 1.4.0beta9-14 14 10400 14.so.0.0[.0] + 1.2.13 13 10213 12.so.0.13[.0] + 1.4.0beta15-36 14 10400 14.so.0.0[.0] + 1.4.0beta37-87 14 10400 14.so.14.0[.0] + 1.4.0rc01 14 10400 14.so.14.0[.0] + 1.4.0beta88-109 14 10400 14.so.14.0[.0] + 1.4.0rc02-08 14 10400 14.so.14.0[.0] + 1.4.0 14 10400 14.so.14.0[.0] + 1.4.1beta01-03 14 10401 14.so.14.1[.0] + 1.4.1rc01 14 10401 14.so.14.1[.0] + 1.4.1beta04-12 14 10401 14.so.14.1[.0] + 1.4.1 14 10401 14.so.14.1[.0] + 1.4.2 14 10402 14.so.14.2[.0] + 1.4.3 14 10403 14.so.14.3[.0] + 1.4.4 14 10404 14.so.14.4[.0] + 1.5.0beta01-58 15 10500 15.so.15.0[.0] + 1.5.0rc01-07 15 10500 15.so.15.0[.0] + 1.5.0 15 10500 15.so.15.0[.0] + 1.5.1beta01-11 15 10501 15.so.15.1[.0] + 1.5.1rc01-02 15 10501 15.so.15.1[.0] + 1.5.1 15 10501 15.so.15.1[.0] + 1.5.2beta01-03 15 10502 15.so.15.2[.0] + 1.5.2rc01-03 15 10502 15.so.15.2[.0] + 1.5.2 15 10502 15.so.15.2[.0] + 1.5.3beta01-10 15 10503 15.so.15.3[.0] + 1.5.3rc01-02 15 10503 15.so.15.3[.0] + 1.5.3beta11 15 10503 15.so.15.3[.0] + 1.5.3 [omitted] + 1.5.4beta01-08 15 10504 15.so.15.4[.0] + 1.5.4rc01 15 10504 15.so.15.4[.0] + 1.5.4 15 10504 15.so.15.4[.0] + 1.5.5beta01-08 15 10505 15.so.15.5[.0] + 1.5.5rc01 15 10505 15.so.15.5[.0] + 1.5.5 15 10505 15.so.15.5[.0] + 1.5.6beta01-07 15 10506 15.so.15.6[.0] + 1.5.6rc01-03 15 10506 15.so.15.6[.0] + 1.5.6 15 10506 15.so.15.6[.0] + 1.5.7beta01-05 15 10507 15.so.15.7[.0] + 1.5.7rc01-03 15 10507 15.so.15.7[.0] + 1.5.7 15 10507 15.so.15.7[.0] + 1.6.0beta01-40 16 10600 16.so.16.0[.0] + 1.6.0rc01-08 16 10600 16.so.16.0[.0] + 1.6.0 16 10600 16.so.16.0[.0] + 1.6.1beta01-09 16 10601 16.so.16.1[.0] + 1.6.1rc01 16 10601 16.so.16.1[.0] + 1.6.1 16 10601 16.so.16.1[.0] + 1.6.2beta01 16 10602 16.so.16.2[.0] + 1.6.2rc01-06 16 10602 16.so.16.2[.0] + 1.6.2 16 10602 16.so.16.2[.0] + +Henceforth the source version will match the shared-library minor +and patch numbers; the shared-library major version number will be +used for changes in backward compatibility, as it is intended. The +PNG_PNGLIB_VER macro, which is not used within libpng but is available +for applications, is an unsigned integer of the form xyyzz corresponding +to the source version x.y.z (leading zeros in y and z). Beta versions +were given the previous public release number plus a letter, until +version 1.0.6j; from then on they were given the upcoming public +release number plus "betaNN" or "rcN". + +.SH "SEE ALSO" +.BR "png"(5), " libpngpf"(3), " zlib"(3), " deflate"(5), " " and " zlib"(5) + +.LP +.IR libpng : +.IP +http://libpng.sourceforge.net (follow the [DOWNLOAD] link) +http://www.libpng.org/pub/png + +.LP +.IR zlib : +.IP +(generally) at the same location as +.I libpng +or at +.br +ftp://ftp.info-zip.org/pub/infozip/zlib + +.LP +.IR PNG specification: RFC 2083 +.IP +(generally) at the same location as +.I libpng +or at +.br +ftp://ds.internic.net/rfc/rfc2083.txt +.br +or (as a W3C Recommendation) at +.br +http://www.w3.org/TR/REC-png.html + +.LP +In the case of any inconsistency between the PNG specification +and this library, the specification takes precedence. + +.SH AUTHORS +This man page: Glenn Randers-Pehrson + + +The contributing authors would like to thank all those who helped +with testing, bug fixes, and patience. This wouldn't have been +possible without all of you. + +Thanks to Frank J. T. Wojcik for helping with the documentation. + +Libpng version 1.6.2 - April 25, 2013: +Initially created in 1995 by Guy Eric Schalnat, then of Group 42, Inc. +Currently maintained by Glenn Randers-Pehrson (glennrp at users.sourceforge.net). + +Supported by the PNG development group +.br +png-mng-implement at lists.sf.net +(subscription required; visit +png-mng-implement at lists.sourceforge.net (subscription required; visit +https://lists.sourceforge.net/lists/listinfo/png-mng-implement +to subscribe). + +.SH COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: + +(This copy of the libpng notices is provided for your convenience. In case of +any discrepancy between this copy and the notices in the file png.h that is +included in the libpng distribution, the latter shall prevail.) + +If you modify libpng you may insert additional notices immediately following +this sentence. + +This code is released under the libpng license. + +libpng versions 1.2.6, August 15, 2004, through 1.6.2, April 25, 2013, are +Copyright (c) 2004,2006-2007 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-1.2.5 +with the following individual added to the list of Contributing Authors + + Cosmin Truta + +libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are +Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-1.0.6 +with the following individuals added to the list of Contributing Authors + + Simon-Pierre Cadieux + Eric S. Raymond + Gilles Vollant + +and with the following additions to the disclaimer: + + There is no warranty against interference with your + enjoyment of the library or against infringement. + There is no warranty that our efforts or the library + will fulfill any of your particular purposes or needs. + This library is provided with all faults, and the entire + risk of satisfactory quality, performance, accuracy, and + effort is with the user. + +libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are +Copyright (c) 1998, 1999 Glenn Randers-Pehrson +Distributed according to the same disclaimer and license as libpng-0.96, +with the following individuals added to the list of Contributing Authors: + + Tom Lane + Glenn Randers-Pehrson + Willem van Schaik + +libpng versions 0.89, June 1996, through 0.96, May 1997, are +Copyright (c) 1996, 1997 Andreas Dilger +Distributed according to the same disclaimer and license as libpng-0.88, +with the following individuals added to the list of Contributing Authors: + + John Bowler + Kevin Bracey + Sam Bushell + Magnus Holmgren + Greg Roelofs + Tom Tanner + +libpng versions 0.5, May 1995, through 0.88, January 1996, are +Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. + +For the purposes of this copyright and license, "Contributing Authors" +is defined as the following set of individuals: + + Andreas Dilger + Dave Martindale + Guy Eric Schalnat + Paul Schmidt + Tim Wegner + +The PNG Reference Library is supplied "AS IS". The Contributing Authors +and Group 42, Inc. disclaim all warranties, expressed or implied, +including, without limitation, the warranties of merchantability and of +fitness for any purpose. The Contributing Authors and Group 42, Inc. +assume no liability for direct, indirect, incidental, special, exemplary, +or consequential damages, which may result from the use of the PNG +Reference Library, even if advised of the possibility of such damage. + +Permission is hereby granted to use, copy, modify, and distribute this +source code, or portions hereof, for any purpose, without fee, subject +to the following restrictions: + +1. The origin of this source code must not be misrepresented. + +2. Altered versions must be plainly marked as such and + must not be misrepresented as being the original source. + +3. This Copyright notice may not be removed or altered from + any source or altered source distribution. + +The Contributing Authors and Group 42, Inc. specifically permit, without +fee, and encourage the use of this source code as a component to +supporting the PNG file format in commercial products. If you use this +source code in a product, acknowledgment is not required but would be +appreciated. + + +A "png_get_copyright" function is available, for convenient use in "about" +boxes and the like: + + printf("%s",png_get_copyright(NULL)); + +Also, the PNG logo (in PNG format, of course) is supplied in the +files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). + +Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a +certification mark of the Open Source Initiative. + +Glenn Randers-Pehrson +glennrp at users.sourceforge.net +April 25, 2013 + +.\" end of man page + diff --git a/src/SDL2/external/libpng-1.6.2/libpng.pc.in b/src/SDL2/external/libpng-1.6.2/libpng.pc.in new file mode 100644 index 000000000..3e7e2c58a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/libpng.pc.in @@ -0,0 +1,11 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@/libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@ + +Name: libpng +Description: Loads and saves PNG files +Version: @PNGLIB_VERSION@ +Libs: -L${libdir} -lpng@PNGLIB_MAJOR@@PNGLIB_MINOR@ +Libs.private: @LIBS@ +Cflags: -I${includedir} diff --git a/src/SDL2/external/libpng-1.6.2/libpngpf.3 b/src/SDL2/external/libpng-1.6.2/libpngpf.3 new file mode 100644 index 000000000..7baaa22d2 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/libpngpf.3 @@ -0,0 +1,18 @@ +.TH LIBPNGPF 3 "April 25, 2013" +.SH NAME +libpng \- Portable Network Graphics (PNG) Reference Library 1.6.2 +(private functions) +.SH SYNOPSIS +\fB#include \fI"pngpriv.h" + +\fBAs of libpng version \fP\fI1.5.1\fP\fB, this section is no longer \fP\fImaintained\fP\fB, now that the private function prototypes are hidden in pngpriv.h and not accessible to applications. Look in pngpriv.h for the prototypes and a short description of each \fIfunction. + +.SH DESCRIPTION +The functions previously listed here are used privately by libpng and are not +available for use by applications. They are not "exported" to applications +using shared libraries. + +.SH SEE ALSO +.BR "png"(5), " libpng"(3), " zlib"(3), " deflate"(5), " " and " zlib"(5) +.SH AUTHOR +Glenn Randers-Pehrson diff --git a/src/SDL2/external/libpng-1.6.2/ltmain.sh b/src/SDL2/external/libpng-1.6.2/ltmain.sh new file mode 100644 index 000000000..63ae69dc6 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/ltmain.sh @@ -0,0 +1,9655 @@ + +# libtool (GNU libtool) 2.4.2 +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --no-warn don't display warning messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.4.2 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . +# GNU libtool home page: . +# General help using GNU software: . + +PROGRAM=libtool +PACKAGE=libtool +VERSION=2.4.2 +TIMESTAMP="" +package_revision=1.3337 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# NLS nuisances: We save the old values to restore during execute mode. +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL + +$lt_unset CDPATH + + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + + + +: ${CP="cp -f"} +test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} # func_dirname may be replaced by extended shell implementation + + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} # func_basename may be replaced by extended shell implementation + + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +} # func_dirname_and_basename may be replaced by extended shell implementation + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname may be replaced by extended shell implementation + + +# These SED scripts presuppose an absolute path with a trailing slash. +pathcar='s,^/\([^/]*\).*$,\1,' +pathcdr='s,^/[^/]*,,' +removedotparts=':dotsl + s@/\./@/@g + t dotsl + s,/\.$,/,' +collapseslashes='s@/\{1,\}@/@g' +finalslash='s,/*$,/,' + +# func_normal_abspath PATH +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +# value returned in "$func_normal_abspath_result" +func_normal_abspath () +{ + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` + while :; do + # Processed it all yet? + if test "$func_normal_abspath_tpath" = / ; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result" ; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + +# func_relative_path SRCDIR DSTDIR +# generates a relative path from SRCDIR to DSTDIR, with a trailing +# slash if non-empty, suitable for immediately appending a filename +# without needing to append a separator. +# value returned in "$func_relative_path_result" +func_relative_path () +{ + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=${func_dirname_result} + if test "x$func_relative_path_tlibdir" = x ; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test "x$func_stripname_result" != x ; then + func_relative_path_result=${func_relative_path_result}/${func_stripname_result} + fi + + # Normalisation. If bindir is libdir, return empty string, + # else relative path ending with a slash; either way, target + # file name can be directly appended. + if test ! -z "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result/" + func_relative_path_result=$func_stripname_result + fi +} + +# The name of this program: +func_dirname_and_basename "$progpath" +progname=$func_basename_result + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=${PATH_SEPARATOR-:} + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' + +# Sed substitution that converts a w32 file name or path +# which contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }$*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + done + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "$my_tmpdir" +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "$1" | $SED \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + +# func_tr_sh +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $opt_debug + + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# / / + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $opt_debug + + $SED -n '/^# Usage:/,/^# *.*--help/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + echo + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. +func_help () +{ + $opt_debug + + $SED -n '/^# Usage:/,/# Report bugs to/ { + :print + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ + p + d + } + /^# .* home page:/b print + /^# General help using/b print + ' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + $opt_debug + + func_error "missing argument for $1." + exit_cmd=exit +} + + +# func_split_short_opt shortopt +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +func_split_short_opt () +{ + my_sed_short_opt='1s/^\(..\).*$/\1/;q' + my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + + func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` + func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` +} # func_split_short_opt may be replaced by extended shell implementation + + +# func_split_long_opt longopt +# Set func_split_long_opt_name and func_split_long_opt_arg shell +# variables after splitting LONGOPT at the `=' sign. +func_split_long_opt () +{ + my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' + my_sed_long_arg='1s/^--[^=]*=//' + + func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` + func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` +} # func_split_long_opt may be replaced by extended shell implementation + +exit_cmd=: + + + + + +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +nonopt= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "${1}=\$${1}\${2}" +} # func_append may be replaced by extended shell implementation + +# func_append_quoted var value +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +func_append_quoted () +{ + func_quote_for_eval "${2}" + eval "${1}=\$${1}\\ \$func_quote_for_eval_result" +} # func_append_quoted may be replaced by extended shell implementation + + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "${@}"` +} # func_arith may be replaced by extended shell implementation + + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` +} # func_len may be replaced by extended shell implementation + + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} # func_lo2o may be replaced by extended shell implementation + + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} # func_xform may be replaced by extended shell implementation + + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + + exit $? +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +# Shorthand for --mode=foo, only valid as the first argument +case $1 in +clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; +compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; +execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; +finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; +install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; +link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; +uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; +esac + + + +# Option defaults: +opt_debug=: +opt_dry_run=false +opt_config=false +opt_preserve_dup_deps=false +opt_features=false +opt_finish=false +opt_help=false +opt_help_all=false +opt_silent=: +opt_warning=: +opt_verbose=: +opt_silent=false +opt_verbose=false + + +# Parse options once, thoroughly. This comes as soon as possible in the +# script to make things like `--version' happen as quickly as we can. +{ + # this just eases exit handling + while test $# -gt 0; do + opt="$1" + shift + case $opt in + --debug|-x) opt_debug='set -x' + func_echo "enabling shell trace mode" + $opt_debug + ;; + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + --config) + opt_config=: +func_config + ;; + --dlopen|-dlopen) + optarg="$1" + opt_dlopen="${opt_dlopen+$opt_dlopen +}$optarg" + shift + ;; + --preserve-dup-deps) + opt_preserve_dup_deps=: + ;; + --features) + opt_features=: +func_features + ;; + --finish) + opt_finish=: +set dummy --mode finish ${1+"$@"}; shift + ;; + --help) + opt_help=: + ;; + --help-all) + opt_help_all=: +opt_help=': help-all' + ;; + --mode) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_mode="$optarg" +case $optarg in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; +esac + shift + ;; + --no-silent|--no-quiet) + opt_silent=false +func_append preserve_args " $opt" + ;; + --no-warning|--no-warn) + opt_warning=false +func_append preserve_args " $opt" + ;; + --no-verbose) + opt_verbose=false +func_append preserve_args " $opt" + ;; + --silent|--quiet) + opt_silent=: +func_append preserve_args " $opt" + opt_verbose=false + ;; + --verbose|-v) + opt_verbose=: +func_append preserve_args " $opt" +opt_silent=false + ;; + --tag) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_tag="$optarg" +func_append preserve_args " $opt $optarg" +func_enable_tag "$optarg" + shift + ;; + + -\?|-h) func_usage ;; + --help) func_help ;; + --version) func_version ;; + + # Separate optargs to long options: + --*=*) + func_split_long_opt "$opt" + set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-n*|-v*) + func_split_short_opt "$opt" + set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognized option \`$opt'" ;; + *) set dummy "$opt" ${1+"$@"}; shift; break ;; + esac + done + + # Validate options: + + # save first non-option argument + if test "$#" -gt 0; then + nonopt="$opt" + shift + fi + + # preserve --debug + test "$opt_debug" = : || func_append preserve_args " --debug" + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + + $opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test "$opt_mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$opt_mode' for more information." + } + + + # Bail if the options were screwed + $exit_cmd $EXIT_FAILURE +} + + + + +## ----------- ## +## Main. ## +## ----------- ## + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result + ;; + esac +} + +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case "$lt_sysroot:$1" in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result="=$func_stripname_result" + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T </dev/null` + if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$lt_sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= + fi + fi +} +# end: func_convert_core_file_wine_to_w32 + + +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $opt_debug + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result="" + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" + fi + fi + done + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 + + +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $opt_debug + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + fi +} +#end: func_cygpath + + +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $opt_debug + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 + + +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $opt_debug + if test -z "$2" && test -n "$1" ; then + func_error "Could not determine host file name corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result="$1" + fi +} +# end func_convert_file_check + + +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $opt_debug + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " \`$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result="$3" + fi + fi +} +# end func_convert_path_check + + +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $opt_debug + case $4 in + $1 ) func_to_host_path_result="$3$func_to_host_path_result" + ;; + esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep + + +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via `$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. + + +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $opt_debug + $to_host_file_cmd "$1" +} +# end func_to_host_file + + +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $opt_debug + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 + ;; + *) + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result + ;; + esac +} +# end func_to_tool_file + + +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result="$1" +} +# end func_convert_file_noop + + +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result="$func_convert_core_msys_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 + + +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 + + +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 + + +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin + + +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin + + +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via `$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. + + +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $opt_debug + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd="func_convert_path_${func_stripname_result}" + fi +} + + +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $opt_debug + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path + + +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result="$1" +} +# end func_convert_path_noop + + +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 + + +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 + + +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 + + +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_msys_to_cygwin + + +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_nix_to_cygwin + + +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" + arg_mode=target + continue + ;; + + -pie | -fpie | -fPIE) + func_append pie_flag " $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + func_append later " $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + func_append_quoted lastarg "$arg" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + func_append base_compile " $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + func_append_quoted base_compile "$lastarg" + done # for arg + + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + func_append command " -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + func_append command " -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { + test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$opt_mode'" + ;; + esac + + echo + $ECHO "Try \`$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + func_append dir "/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_append_quoted args "$file" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libs= + libdirs= + admincmds= + + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" + + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" + else + func_warning "\`$opt' is not a valid libtool archive" + fi + + else + func_fatal_error "invalid argument \`$opt'" + fi + done + + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi + + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi + exit $EXIT_SUCCESS +} + +test "$opt_mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + func_append files " $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + func_append install_shared_prog " $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + func_append staticlibs " $file" + ;; + + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) func_append future_libdirs " $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + func_append dir "$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $tool_oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename="" + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname" ; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename="$func_basename_result" + else + # no lafile. user explicitly requested -dlpreopen . + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename" ; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + echo >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +extern LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) func_append symtab_cflags " $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () +{ + $opt_debug + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` +} + +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () +{ + $opt_debug + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive which possess that section. Heuristic: eliminate + # all those which have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' +} + +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () +{ + $opt_debug + if func_cygming_gnu_implib_p "$1" ; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1" ; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result="" + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ which is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options which match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + case \" \$* \" in + *\\ --lt-*) + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done ;; + esac + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} + + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#if defined(LT_DEBUGWRAPPER) +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} + +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -n -e ' +s/^\(.\{79\}\)\(..*\)/\1\ +\2/ +h +s/\([\\"]\)/\\\1/g +s/$/\\n/ +s/\([^\n]*\).*/ fputs ("\1", f);/p +g +D' + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + func_append dlfiles " $arg" + else + func_append dlprefiles " $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# func_append moreargs " $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) func_append rpath " $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) func_append xrpath " $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + func_append weak_libs " $arg" + prev= + continue + ;; + xcclinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -bindir) + prev=bindir + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; + *) + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) func_append dllsearchpath ":$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + func_append deplibs " System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + func_append deplibs " $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) func_append new_inherited_linker_flags " $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + func_append compiler_flags " $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + func_append objs " $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + func_append deplibs " $arg" + func_append old_deplibs " $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + func_resolve_sysroot "$arg" + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + func_append dlfiles " $func_resolve_sysroot_result" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + func_append dlprefiles " $func_resolve_sysroot_result" + prev= + else + func_append deplibs " $func_resolve_sysroot_result" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_preserve_dup_deps ; then + case "$libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append libs " $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + esac + func_append pre_post_deps " $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + func_resolve_sysroot "$lib" + case $lib in + *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) func_append deplibs " $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append compiler_flags " $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + else + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + func_append newdlprefiles " $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append newdlfiles " $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + if test -n "$old_library" && + { test "$prefer_static_libs" = yes || + test "$prefer_static_libs,$installed" = "built,no"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib="$l" + done + fi + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + func_append dlprefiles " $lib $dependency_libs" + else + func_append newdlfiles " $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$lt_sysroot$libdir" + absdir="$lt_sysroot$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + case "$host" in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + func_append newlib_search_path " $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) func_append temp_rpath "$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + echo + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$opt_mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$absdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$opt_mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) func_append xrpath " $temp_xrpath";; + esac;; + *) func_append temp_deplibs " $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + func_append newlib_search_path " $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; + esac + fi + func_append tmp_libs " $func_resolve_sysroot_result" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." + dir=$func_dirname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) func_append lib_search_path " $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) func_append tmp_libs " $deplib" ;; + esac + ;; + *) func_append tmp_libs " $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + func_append tmp_libs " $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + func_append objs "$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + func_append libobjs " $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + # correct linux to gnu/linux during the next big refactor + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|qnx|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) # correct to gnu/linux during the next big refactor + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + func_append verstring ":${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + func_append libobjs " $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$opt_mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + func_append removelist " $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + func_append oldlibs " $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) func_append dlfiles " $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) func_append dlprefiles " $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + func_append deplibs " System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + func_append deplibs " -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + func_append newdeplibs " $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + # Remove ${wl} instances when linking with ld. + # FIXME: should test the right _cmds variable. + case $archive_cmds in + *\$LD\ *) wl= ;; + esac + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append dep_rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + func_append linknames " $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + func_append delfiles " $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd1 in $cmds; do + IFS="$save_ifs" + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test "$try_normal_branch" = yes \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=${output_objdir}/${output_la}.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + func_append tmp_deplibs " $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + func_append linker_flags " $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + func_append delfiles " $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # If we're not building shared, we need to use non_pic_objs + test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" + + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + func_append compile_command " ${wl}-bind_at_load" + func_append finalize_command " ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) func_append dllsearchpath ":$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) func_append finalize_perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=yes + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + + exit $exit_status + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + func_append rpath "$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + func_append oldobjs " $symfileobj" + fi + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $addlibs + func_append oldobjs " $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append oldobjs " $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" + ;; + *) func_append oldobjs " $obj" ;; + esac + done + fi + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + func_resolve_sysroot "$deplib" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" + ;; + *) func_append newdependency_libs " $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; + *) func_append newdlfiles " $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlfiles " $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlprefiles " $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +{ test "$opt_mode" = link || test "$opt_mode" = relink; } && + func_mode_link ${1+"$@"} + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) func_append RM " $arg"; rmforce=yes ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + odir="$objdir" + else + odir="$dir/$objdir" + fi + func_basename "$file" + name="$func_basename_result" + test "$opt_mode" = uninstall && odir="$dir" + + # Remember odir for removal later, being careful to avoid duplicates + if test "$opt_mode" = clean; then + case " $rmdirs " in + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + func_append rmfiles " $odir/$n" + done + test -n "$old_library" && func_append rmfiles " $odir/$old_library" + + case "$opt_mode" in + clean) + case " $library_names " in + *" $dlname "*) ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + esac + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + func_append rmfiles " $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + func_append rmfiles " $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$opt_mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + func_append rmfiles " $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + func_append rmfiles " $odir/$name $odir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + func_append rmfiles " $odir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + func_append rmfiles " $odir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +test -z "$opt_mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$opt_mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: +# vi:sw=2 + diff --git a/src/SDL2/external/libpng-1.6.2/missing b/src/SDL2/external/libpng-1.6.2/missing new file mode 100755 index 000000000..ed429b4dd --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/missing @@ -0,0 +1,215 @@ +#! /bin/sh +# Common wrapper for a few potentially missing GNU programs. + +scriptversion=2012-06-26.16; # UTC + +# Copyright (C) 1996-2012 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try '$0 --help' for more information" + exit 1 +fi + +case $1 in + + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; + + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + +Supported PROGRAM values: + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man + +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" + exit 1 + ;; + +esac + +# Run the given program, remember its exit status. +"$@"; st=$? + +# If it succeeded, we are done. +test $st -eq 0 && exit 0 + +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi + +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'automa4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/src/SDL2/external/libpng-1.6.2/png.5 b/src/SDL2/external/libpng-1.6.2/png.5 new file mode 100644 index 000000000..e14e7da41 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/png.5 @@ -0,0 +1,74 @@ +.TH PNG 5 "April 25, 2013" +.SH NAME +png \- Portable Network Graphics (PNG) format +.SH DESCRIPTION +PNG (Portable Network Graphics) is an extensible file format for the +lossless, portable, well-compressed storage of raster images. PNG provides +a patent-free replacement for GIF and can also replace many +common uses of TIFF. Indexed-color, grayscale, and truecolor images are +supported, plus an optional alpha channel. Sample depths range from +1 to 16 bits. +.br + +PNG is designed to work well in online viewing applications, such as the +World Wide Web, so it is fully streamable with a progressive display +option. PNG is robust, providing both full file integrity checking and +fast, simple detection of common transmission errors. Also, PNG can store +gamma and chromaticity data for improved color matching on heterogeneous +platforms. + +.SH "SEE ALSO" +.BR "libpng"(3), " libpngpf"(3), " zlib"(3), " deflate"(5), " " and " zlib"(5) +.LP +PNG specification (second edition), November 2003: +.IP +.br + 8) + png_error(png_ptr, "Too many bytes for PNG signature"); + + png_ptr->sig_bytes = (png_byte)(num_bytes < 0 ? 0 : num_bytes); +} + +/* Checks whether the supplied bytes match the PNG signature. We allow + * checking less than the full 8-byte signature so that those apps that + * already read the first few bytes of a file to determine the file type + * can simply check the remaining bytes for extra assurance. Returns + * an integer less than, equal to, or greater than zero if sig is found, + * respectively, to be less than, to match, or be greater than the correct + * PNG signature (this is the same behavior as strcmp, memcmp, etc). + */ +int PNGAPI +png_sig_cmp(png_const_bytep sig, png_size_t start, png_size_t num_to_check) +{ + png_byte png_signature[8] = {137, 80, 78, 71, 13, 10, 26, 10}; + + if (num_to_check > 8) + num_to_check = 8; + + else if (num_to_check < 1) + return (-1); + + if (start > 7) + return (-1); + + if (start + num_to_check > 8) + num_to_check = 8 - start; + + return ((int)(memcmp(&sig[start], &png_signature[start], num_to_check))); +} + +#endif /* PNG_READ_SUPPORTED */ + +#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) +/* Function to allocate memory for zlib */ +PNG_FUNCTION(voidpf /* PRIVATE */, +png_zalloc,(voidpf png_ptr, uInt items, uInt size),PNG_ALLOCATED) +{ + png_alloc_size_t num_bytes = size; + + if (png_ptr == NULL) + return NULL; + + if (items >= (~(png_alloc_size_t)0)/size) + { + png_warning (png_voidcast(png_structrp, png_ptr), + "Potential overflow in png_zalloc()"); + return NULL; + } + + num_bytes *= items; + return png_malloc_warn(png_voidcast(png_structrp, png_ptr), num_bytes); +} + +/* Function to free memory for zlib */ +void /* PRIVATE */ +png_zfree(voidpf png_ptr, voidpf ptr) +{ + png_free(png_voidcast(png_const_structrp,png_ptr), ptr); +} + +/* Reset the CRC variable to 32 bits of 1's. Care must be taken + * in case CRC is > 32 bits to leave the top bits 0. + */ +void /* PRIVATE */ +png_reset_crc(png_structrp png_ptr) +{ + /* The cast is safe because the crc is a 32 bit value. */ + png_ptr->crc = (png_uint_32)crc32(0, Z_NULL, 0); +} + +/* Calculate the CRC over a section of data. We can only pass as + * much data to this routine as the largest single buffer size. We + * also check that this data will actually be used before going to the + * trouble of calculating it. + */ +void /* PRIVATE */ +png_calculate_crc(png_structrp png_ptr, png_const_bytep ptr, png_size_t length) +{ + int need_crc = 1; + + if (PNG_CHUNK_ANCILLARY(png_ptr->chunk_name)) + { + if ((png_ptr->flags & PNG_FLAG_CRC_ANCILLARY_MASK) == + (PNG_FLAG_CRC_ANCILLARY_USE | PNG_FLAG_CRC_ANCILLARY_NOWARN)) + need_crc = 0; + } + + else /* critical */ + { + if (png_ptr->flags & PNG_FLAG_CRC_CRITICAL_IGNORE) + need_crc = 0; + } + + /* 'uLong' is defined in zlib.h as unsigned long; this means that on some + * systems it is a 64 bit value. crc32, however, returns 32 bits so the + * following cast is safe. 'uInt' may be no more than 16 bits, so it is + * necessary to perform a loop here. + */ + if (need_crc && length > 0) + { + uLong crc = png_ptr->crc; /* Should never issue a warning */ + + do + { + uInt safe_length = (uInt)length; + if (safe_length == 0) + safe_length = (uInt)-1; /* evil, but safe */ + + crc = crc32(crc, ptr, safe_length); + + /* The following should never issue compiler warnings; if they do the + * target system has characteristics that will probably violate other + * assumptions within the libpng code. + */ + ptr += safe_length; + length -= safe_length; + } + while (length > 0); + + /* And the following is always safe because the crc is only 32 bits. */ + png_ptr->crc = (png_uint_32)crc; + } +} + +/* Check a user supplied version number, called from both read and write + * functions that create a png_struct. + */ +int +png_user_version_check(png_structrp png_ptr, png_const_charp user_png_ver) +{ + if (user_png_ver) + { + int i = 0; + + do + { + if (user_png_ver[i] != png_libpng_ver[i]) + png_ptr->flags |= PNG_FLAG_LIBRARY_MISMATCH; + } while (png_libpng_ver[i++]); + } + + else + png_ptr->flags |= PNG_FLAG_LIBRARY_MISMATCH; + + if (png_ptr->flags & PNG_FLAG_LIBRARY_MISMATCH) + { + /* Libpng 0.90 and later are binary incompatible with libpng 0.89, so + * we must recompile any applications that use any older library version. + * For versions after libpng 1.0, we will be compatible, so we need + * only check the first and third digits (note that when we reach version + * 1.10 we will need to check the fourth symbol, namely user_png_ver[3]). + */ + if (user_png_ver == NULL || user_png_ver[0] != png_libpng_ver[0] || + (user_png_ver[0] == '1' && (user_png_ver[2] != png_libpng_ver[2] || + user_png_ver[3] != png_libpng_ver[3])) || + (user_png_ver[0] == '0' && user_png_ver[2] < '9')) + { +#ifdef PNG_WARNINGS_SUPPORTED + size_t pos = 0; + char m[128]; + + pos = png_safecat(m, (sizeof m), pos, + "Application built with libpng-"); + pos = png_safecat(m, (sizeof m), pos, user_png_ver); + pos = png_safecat(m, (sizeof m), pos, " but running with "); + pos = png_safecat(m, (sizeof m), pos, png_libpng_ver); + + png_warning(png_ptr, m); +#endif + +#ifdef PNG_ERROR_NUMBERS_SUPPORTED + png_ptr->flags = 0; +#endif + + return 0; + } + } + + /* Success return. */ + return 1; +} + +/* Generic function to create a png_struct for either read or write - this + * contains the common initialization. + */ +PNG_FUNCTION(png_structp /* PRIVATE */, +png_create_png_struct,(png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn, png_voidp mem_ptr, + png_malloc_ptr malloc_fn, png_free_ptr free_fn),PNG_ALLOCATED) +{ + png_struct create_struct; +# ifdef PNG_SETJMP_SUPPORTED + jmp_buf create_jmp_buf; +# endif + + /* This temporary stack-allocated structure is used to provide a place to + * build enough context to allow the user provided memory allocator (if any) + * to be called. + */ + memset(&create_struct, 0, (sizeof create_struct)); + + /* Added at libpng-1.2.6 */ +# ifdef PNG_USER_LIMITS_SUPPORTED + create_struct.user_width_max = PNG_USER_WIDTH_MAX; + create_struct.user_height_max = PNG_USER_HEIGHT_MAX; + +# ifdef PNG_USER_CHUNK_CACHE_MAX + /* Added at libpng-1.2.43 and 1.4.0 */ + create_struct.user_chunk_cache_max = PNG_USER_CHUNK_CACHE_MAX; +# endif + +# ifdef PNG_USER_CHUNK_MALLOC_MAX + /* Added at libpng-1.2.43 and 1.4.1, required only for read but exists + * in png_struct regardless. + */ + create_struct.user_chunk_malloc_max = PNG_USER_CHUNK_MALLOC_MAX; +# endif +# endif + + /* The following two API calls simply set fields in png_struct, so it is safe + * to do them now even though error handling is not yet set up. + */ +# ifdef PNG_USER_MEM_SUPPORTED + png_set_mem_fn(&create_struct, mem_ptr, malloc_fn, free_fn); +# endif + + /* (*error_fn) can return control to the caller after the error_ptr is set, + * this will result in a memory leak unless the error_fn does something + * extremely sophisticated. The design lacks merit but is implicit in the + * API. + */ + png_set_error_fn(&create_struct, error_ptr, error_fn, warn_fn); + +# ifdef PNG_SETJMP_SUPPORTED + if (!setjmp(create_jmp_buf)) + { + /* Temporarily fake out the longjmp information until we have + * successfully completed this function. This only works if we have + * setjmp() support compiled in, but it is safe - this stuff should + * never happen. + */ + create_struct.jmp_buf_ptr = &create_jmp_buf; + create_struct.jmp_buf_size = 0; /*stack allocation*/ + create_struct.longjmp_fn = longjmp; +# else + { +# endif + /* Call the general version checker (shared with read and write code): + */ + if (png_user_version_check(&create_struct, user_png_ver)) + { + png_structrp png_ptr = png_voidcast(png_structrp, + png_malloc_warn(&create_struct, (sizeof *png_ptr))); + + if (png_ptr != NULL) + { + /* png_ptr->zstream holds a back-pointer to the png_struct, so + * this can only be done now: + */ + create_struct.zstream.zalloc = png_zalloc; + create_struct.zstream.zfree = png_zfree; + create_struct.zstream.opaque = png_ptr; + +# ifdef PNG_SETJMP_SUPPORTED + /* Eliminate the local error handling: */ + create_struct.jmp_buf_ptr = NULL; + create_struct.jmp_buf_size = 0; + create_struct.longjmp_fn = 0; +# endif + + *png_ptr = create_struct; + + /* This is the successful return point */ + return png_ptr; + } + } + } + + /* A longjmp because of a bug in the application storage allocator or a + * simple failure to allocate the png_struct. + */ + return NULL; +} + +/* Allocate the memory for an info_struct for the application. */ +PNG_FUNCTION(png_infop,PNGAPI +png_create_info_struct,(png_const_structrp png_ptr),PNG_ALLOCATED) +{ + png_inforp info_ptr; + + png_debug(1, "in png_create_info_struct"); + + if (png_ptr == NULL) + return NULL; + + /* Use the internal API that does not (or at least should not) error out, so + * that this call always returns ok. The application typically sets up the + * error handling *after* creating the info_struct because this is the way it + * has always been done in 'example.c'. + */ + info_ptr = png_voidcast(png_inforp, png_malloc_base(png_ptr, + (sizeof *info_ptr))); + + if (info_ptr != NULL) + memset(info_ptr, 0, (sizeof *info_ptr)); + + return info_ptr; +} + +/* This function frees the memory associated with a single info struct. + * Normally, one would use either png_destroy_read_struct() or + * png_destroy_write_struct() to free an info struct, but this may be + * useful for some applications. From libpng 1.6.0 this function is also used + * internally to implement the png_info release part of the 'struct' destroy + * APIs. This ensures that all possible approaches free the same data (all of + * it). + */ +void PNGAPI +png_destroy_info_struct(png_const_structrp png_ptr, png_infopp info_ptr_ptr) +{ + png_inforp info_ptr = NULL; + + png_debug(1, "in png_destroy_info_struct"); + + if (png_ptr == NULL) + return; + + if (info_ptr_ptr != NULL) + info_ptr = *info_ptr_ptr; + + if (info_ptr != NULL) + { + /* Do this first in case of an error below; if the app implements its own + * memory management this can lead to png_free calling png_error, which + * will abort this routine and return control to the app error handler. + * An infinite loop may result if it then tries to free the same info + * ptr. + */ + *info_ptr_ptr = NULL; + + png_free_data(png_ptr, info_ptr, PNG_FREE_ALL, -1); + memset(info_ptr, 0, (sizeof *info_ptr)); + png_free(png_ptr, info_ptr); + } +} + +/* Initialize the info structure. This is now an internal function (0.89) + * and applications using it are urged to use png_create_info_struct() + * instead. Use deprecated in 1.6.0, internal use removed (used internally it + * is just a memset). + * + * NOTE: it is almost inconceivable that this API is used because it bypasses + * the user-memory mechanism and the user error handling/warning mechanisms in + * those cases where it does anything other than a memset. + */ +PNG_FUNCTION(void,PNGAPI +png_info_init_3,(png_infopp ptr_ptr, png_size_t png_info_struct_size), + PNG_DEPRECATED) +{ + png_inforp info_ptr = *ptr_ptr; + + png_debug(1, "in png_info_init_3"); + + if (info_ptr == NULL) + return; + + if ((sizeof (png_info)) > png_info_struct_size) + { + *ptr_ptr = NULL; + /* The following line is why this API should not be used: */ + free(info_ptr); + info_ptr = png_voidcast(png_inforp, png_malloc_base(NULL, + (sizeof *info_ptr))); + *ptr_ptr = info_ptr; + } + + /* Set everything to 0 */ + memset(info_ptr, 0, (sizeof *info_ptr)); +} + +/* The following API is not called internally */ +void PNGAPI +png_data_freer(png_const_structrp png_ptr, png_inforp info_ptr, + int freer, png_uint_32 mask) +{ + png_debug(1, "in png_data_freer"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + if (freer == PNG_DESTROY_WILL_FREE_DATA) + info_ptr->free_me |= mask; + + else if (freer == PNG_USER_WILL_FREE_DATA) + info_ptr->free_me &= ~mask; + + else + png_error(png_ptr, "Unknown freer parameter in png_data_freer"); +} + +void PNGAPI +png_free_data(png_const_structrp png_ptr, png_inforp info_ptr, png_uint_32 mask, + int num) +{ + png_debug(1, "in png_free_data"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + +#ifdef PNG_TEXT_SUPPORTED + /* Free text item num or (if num == -1) all text items */ + if ((mask & PNG_FREE_TEXT) & info_ptr->free_me) + { + if (num != -1) + { + if (info_ptr->text && info_ptr->text[num].key) + { + png_free(png_ptr, info_ptr->text[num].key); + info_ptr->text[num].key = NULL; + } + } + + else + { + int i; + for (i = 0; i < info_ptr->num_text; i++) + png_free_data(png_ptr, info_ptr, PNG_FREE_TEXT, i); + png_free(png_ptr, info_ptr->text); + info_ptr->text = NULL; + info_ptr->num_text=0; + } + } +#endif + +#ifdef PNG_tRNS_SUPPORTED + /* Free any tRNS entry */ + if ((mask & PNG_FREE_TRNS) & info_ptr->free_me) + { + png_free(png_ptr, info_ptr->trans_alpha); + info_ptr->trans_alpha = NULL; + info_ptr->valid &= ~PNG_INFO_tRNS; + } +#endif + +#ifdef PNG_sCAL_SUPPORTED + /* Free any sCAL entry */ + if ((mask & PNG_FREE_SCAL) & info_ptr->free_me) + { + png_free(png_ptr, info_ptr->scal_s_width); + png_free(png_ptr, info_ptr->scal_s_height); + info_ptr->scal_s_width = NULL; + info_ptr->scal_s_height = NULL; + info_ptr->valid &= ~PNG_INFO_sCAL; + } +#endif + +#ifdef PNG_pCAL_SUPPORTED + /* Free any pCAL entry */ + if ((mask & PNG_FREE_PCAL) & info_ptr->free_me) + { + png_free(png_ptr, info_ptr->pcal_purpose); + png_free(png_ptr, info_ptr->pcal_units); + info_ptr->pcal_purpose = NULL; + info_ptr->pcal_units = NULL; + if (info_ptr->pcal_params != NULL) + { + unsigned int i; + for (i = 0; i < info_ptr->pcal_nparams; i++) + { + png_free(png_ptr, info_ptr->pcal_params[i]); + info_ptr->pcal_params[i] = NULL; + } + png_free(png_ptr, info_ptr->pcal_params); + info_ptr->pcal_params = NULL; + } + info_ptr->valid &= ~PNG_INFO_pCAL; + } +#endif + +#ifdef PNG_iCCP_SUPPORTED + /* Free any profile entry */ + if ((mask & PNG_FREE_ICCP) & info_ptr->free_me) + { + png_free(png_ptr, info_ptr->iccp_name); + png_free(png_ptr, info_ptr->iccp_profile); + info_ptr->iccp_name = NULL; + info_ptr->iccp_profile = NULL; + info_ptr->valid &= ~PNG_INFO_iCCP; + } +#endif + +#ifdef PNG_sPLT_SUPPORTED + /* Free a given sPLT entry, or (if num == -1) all sPLT entries */ + if ((mask & PNG_FREE_SPLT) & info_ptr->free_me) + { + if (num != -1) + { + if (info_ptr->splt_palettes) + { + png_free(png_ptr, info_ptr->splt_palettes[num].name); + png_free(png_ptr, info_ptr->splt_palettes[num].entries); + info_ptr->splt_palettes[num].name = NULL; + info_ptr->splt_palettes[num].entries = NULL; + } + } + + else + { + if (info_ptr->splt_palettes_num) + { + int i; + for (i = 0; i < info_ptr->splt_palettes_num; i++) + png_free_data(png_ptr, info_ptr, PNG_FREE_SPLT, (int)i); + + png_free(png_ptr, info_ptr->splt_palettes); + info_ptr->splt_palettes = NULL; + info_ptr->splt_palettes_num = 0; + } + info_ptr->valid &= ~PNG_INFO_sPLT; + } + } +#endif + +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED + if ((mask & PNG_FREE_UNKN) & info_ptr->free_me) + { + if (num != -1) + { + if (info_ptr->unknown_chunks) + { + png_free(png_ptr, info_ptr->unknown_chunks[num].data); + info_ptr->unknown_chunks[num].data = NULL; + } + } + + else + { + int i; + + if (info_ptr->unknown_chunks_num) + { + for (i = 0; i < info_ptr->unknown_chunks_num; i++) + png_free_data(png_ptr, info_ptr, PNG_FREE_UNKN, (int)i); + + png_free(png_ptr, info_ptr->unknown_chunks); + info_ptr->unknown_chunks = NULL; + info_ptr->unknown_chunks_num = 0; + } + } + } +#endif + +#ifdef PNG_hIST_SUPPORTED + /* Free any hIST entry */ + if ((mask & PNG_FREE_HIST) & info_ptr->free_me) + { + png_free(png_ptr, info_ptr->hist); + info_ptr->hist = NULL; + info_ptr->valid &= ~PNG_INFO_hIST; + } +#endif + + /* Free any PLTE entry that was internally allocated */ + if ((mask & PNG_FREE_PLTE) & info_ptr->free_me) + { + png_free(png_ptr, info_ptr->palette); + info_ptr->palette = NULL; + info_ptr->valid &= ~PNG_INFO_PLTE; + info_ptr->num_palette = 0; + } + +#ifdef PNG_INFO_IMAGE_SUPPORTED + /* Free any image bits attached to the info structure */ + if ((mask & PNG_FREE_ROWS) & info_ptr->free_me) + { + if (info_ptr->row_pointers) + { + png_uint_32 row; + for (row = 0; row < info_ptr->height; row++) + { + png_free(png_ptr, info_ptr->row_pointers[row]); + info_ptr->row_pointers[row] = NULL; + } + png_free(png_ptr, info_ptr->row_pointers); + info_ptr->row_pointers = NULL; + } + info_ptr->valid &= ~PNG_INFO_IDAT; + } +#endif + + if (num != -1) + mask &= ~PNG_FREE_MUL; + + info_ptr->free_me &= ~mask; +} +#endif /* defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) */ + +/* This function returns a pointer to the io_ptr associated with the user + * functions. The application should free any memory associated with this + * pointer before png_write_destroy() or png_read_destroy() are called. + */ +png_voidp PNGAPI +png_get_io_ptr(png_const_structrp png_ptr) +{ + if (png_ptr == NULL) + return (NULL); + + return (png_ptr->io_ptr); +} + +#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) +# ifdef PNG_STDIO_SUPPORTED +/* Initialize the default input/output functions for the PNG file. If you + * use your own read or write routines, you can call either png_set_read_fn() + * or png_set_write_fn() instead of png_init_io(). If you have defined + * PNG_NO_STDIO or otherwise disabled PNG_STDIO_SUPPORTED, you must use a + * function of your own because "FILE *" isn't necessarily available. + */ +void PNGAPI +png_init_io(png_structrp png_ptr, png_FILE_p fp) +{ + png_debug(1, "in png_init_io"); + + if (png_ptr == NULL) + return; + + png_ptr->io_ptr = (png_voidp)fp; +} +# endif + +#ifdef PNG_SAVE_INT_32_SUPPORTED +/* The png_save_int_32 function assumes integers are stored in two's + * complement format. If this isn't the case, then this routine needs to + * be modified to write data in two's complement format. Note that, + * the following works correctly even if png_int_32 has more than 32 bits + * (compare the more complex code required on read for sign extension.) + */ +void PNGAPI +png_save_int_32(png_bytep buf, png_int_32 i) +{ + buf[0] = (png_byte)((i >> 24) & 0xff); + buf[1] = (png_byte)((i >> 16) & 0xff); + buf[2] = (png_byte)((i >> 8) & 0xff); + buf[3] = (png_byte)(i & 0xff); +} +#endif + +# ifdef PNG_TIME_RFC1123_SUPPORTED +/* Convert the supplied time into an RFC 1123 string suitable for use in + * a "Creation Time" or other text-based time string. + */ +int PNGAPI +png_convert_to_rfc1123_buffer(char out[29], png_const_timep ptime) +{ + static PNG_CONST char short_months[12][4] = + {"Jan", "Feb", "Mar", "Apr", "May", "Jun", + "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"}; + + if (out == NULL) + return 0; + + if (ptime->year > 9999 /* RFC1123 limitation */ || + ptime->month == 0 || ptime->month > 12 || + ptime->day == 0 || ptime->day > 31 || + ptime->hour > 23 || ptime->minute > 59 || + ptime->second > 60) + return 0; + + { + size_t pos = 0; + char number_buf[5]; /* enough for a four-digit year */ + +# define APPEND_STRING(string) pos = png_safecat(out, 29, pos, (string)) +# define APPEND_NUMBER(format, value)\ + APPEND_STRING(PNG_FORMAT_NUMBER(number_buf, format, (value))) +# define APPEND(ch) if (pos < 28) out[pos++] = (ch) + + APPEND_NUMBER(PNG_NUMBER_FORMAT_u, (unsigned)ptime->day); + APPEND(' '); + APPEND_STRING(short_months[(ptime->month - 1)]); + APPEND(' '); + APPEND_NUMBER(PNG_NUMBER_FORMAT_u, ptime->year); + APPEND(' '); + APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->hour); + APPEND(':'); + APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->minute); + APPEND(':'); + APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->second); + APPEND_STRING(" +0000"); /* This reliably terminates the buffer */ + +# undef APPEND +# undef APPEND_NUMBER +# undef APPEND_STRING + } + + return 1; +} + +# if PNG_LIBPNG_VER < 10700 +/* To do: remove the following from libpng-1.7 */ +/* Original API that uses a private buffer in png_struct. + * Deprecated because it causes png_struct to carry a spurious temporary + * buffer (png_struct::time_buffer), better to have the caller pass this in. + */ +png_const_charp PNGAPI +png_convert_to_rfc1123(png_structrp png_ptr, png_const_timep ptime) +{ + if (png_ptr != NULL) + { + /* The only failure above if png_ptr != NULL is from an invalid ptime */ + if (!png_convert_to_rfc1123_buffer(png_ptr->time_buffer, ptime)) + png_warning(png_ptr, "Ignoring invalid time value"); + + else + return png_ptr->time_buffer; + } + + return NULL; +} +# endif +# endif /* PNG_TIME_RFC1123_SUPPORTED */ + +#endif /* defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) */ + +png_const_charp PNGAPI +png_get_copyright(png_const_structrp png_ptr) +{ + PNG_UNUSED(png_ptr) /* Silence compiler warning about unused png_ptr */ +#ifdef PNG_STRING_COPYRIGHT + return PNG_STRING_COPYRIGHT +#else +# ifdef __STDC__ + return PNG_STRING_NEWLINE \ + "libpng version 1.6.2 - April 25, 2013" PNG_STRING_NEWLINE \ + "Copyright (c) 1998-2013 Glenn Randers-Pehrson" PNG_STRING_NEWLINE \ + "Copyright (c) 1996-1997 Andreas Dilger" PNG_STRING_NEWLINE \ + "Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc." \ + PNG_STRING_NEWLINE; +# else + return "libpng version 1.6.2 - April 25, 2013\ + Copyright (c) 1998-2013 Glenn Randers-Pehrson\ + Copyright (c) 1996-1997 Andreas Dilger\ + Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc."; +# endif +#endif +} + +/* The following return the library version as a short string in the + * format 1.0.0 through 99.99.99zz. To get the version of *.h files + * used with your application, print out PNG_LIBPNG_VER_STRING, which + * is defined in png.h. + * Note: now there is no difference between png_get_libpng_ver() and + * png_get_header_ver(). Due to the version_nn_nn_nn typedef guard, + * it is guaranteed that png.c uses the correct version of png.h. + */ +png_const_charp PNGAPI +png_get_libpng_ver(png_const_structrp png_ptr) +{ + /* Version of *.c files used when building libpng */ + return png_get_header_ver(png_ptr); +} + +png_const_charp PNGAPI +png_get_header_ver(png_const_structrp png_ptr) +{ + /* Version of *.h files used when building libpng */ + PNG_UNUSED(png_ptr) /* Silence compiler warning about unused png_ptr */ + return PNG_LIBPNG_VER_STRING; +} + +png_const_charp PNGAPI +png_get_header_version(png_const_structrp png_ptr) +{ + /* Returns longer string containing both version and date */ + PNG_UNUSED(png_ptr) /* Silence compiler warning about unused png_ptr */ +#ifdef __STDC__ + return PNG_HEADER_VERSION_STRING +# ifndef PNG_READ_SUPPORTED + " (NO READ SUPPORT)" +# endif + PNG_STRING_NEWLINE; +#else + return PNG_HEADER_VERSION_STRING; +#endif +} + +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +int PNGAPI +png_handle_as_unknown(png_const_structrp png_ptr, png_const_bytep chunk_name) +{ + /* Check chunk_name and return "keep" value if it's on the list, else 0 */ + png_const_bytep p, p_end; + + if (png_ptr == NULL || chunk_name == NULL || png_ptr->num_chunk_list == 0) + return PNG_HANDLE_CHUNK_AS_DEFAULT; + + p_end = png_ptr->chunk_list; + p = p_end + png_ptr->num_chunk_list*5; /* beyond end */ + + /* The code is the fifth byte after each four byte string. Historically this + * code was always searched from the end of the list, this is no longer + * necessary because the 'set' routine handles duplicate entries correcty. + */ + do /* num_chunk_list > 0, so at least one */ + { + p -= 5; + + if (!memcmp(chunk_name, p, 4)) + return p[4]; + } + while (p > p_end); + + /* This means that known chunks should be processed and unknown chunks should + * be handled according to the value of png_ptr->unknown_default; this can be + * confusing because, as a result, there are two levels of defaulting for + * unknown chunks. + */ + return PNG_HANDLE_CHUNK_AS_DEFAULT; +} + +#ifdef PNG_READ_UNKNOWN_CHUNKS_SUPPORTED +int /* PRIVATE */ +png_chunk_unknown_handling(png_const_structrp png_ptr, png_uint_32 chunk_name) +{ + png_byte chunk_string[5]; + + PNG_CSTRING_FROM_CHUNK(chunk_string, chunk_name); + return png_handle_as_unknown(png_ptr, chunk_string); +} +#endif /* READ_UNKNOWN_CHUNKS */ +#endif /* SET_UNKNOWN_CHUNKS */ + +#ifdef PNG_READ_SUPPORTED +/* This function, added to libpng-1.0.6g, is untested. */ +int PNGAPI +png_reset_zstream(png_structrp png_ptr) +{ + if (png_ptr == NULL) + return Z_STREAM_ERROR; + + /* WARNING: this resets the window bits to the maximum! */ + return (inflateReset(&png_ptr->zstream)); +} +#endif /* PNG_READ_SUPPORTED */ + +/* This function was added to libpng-1.0.7 */ +png_uint_32 PNGAPI +png_access_version_number(void) +{ + /* Version of *.c files used when building libpng */ + return((png_uint_32)PNG_LIBPNG_VER); +} + + + +#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) +/* Ensure that png_ptr->zstream.msg holds some appropriate error message string. + * If it doesn't 'ret' is used to set it to something appropriate, even in cases + * like Z_OK or Z_STREAM_END where the error code is apparently a success code. + */ +void /* PRIVATE */ +png_zstream_error(png_structrp png_ptr, int ret) +{ + /* Translate 'ret' into an appropriate error string, priority is given to the + * one in zstream if set. This always returns a string, even in cases like + * Z_OK or Z_STREAM_END where the error code is a success code. + */ + if (png_ptr->zstream.msg == NULL) switch (ret) + { + default: + case Z_OK: + png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected zlib return code"); + break; + + case Z_STREAM_END: + /* Normal exit */ + png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected end of LZ stream"); + break; + + case Z_NEED_DICT: + /* This means the deflate stream did not have a dictionary; this + * indicates a bogus PNG. + */ + png_ptr->zstream.msg = PNGZ_MSG_CAST("missing LZ dictionary"); + break; + + case Z_ERRNO: + /* gz APIs only: should not happen */ + png_ptr->zstream.msg = PNGZ_MSG_CAST("zlib IO error"); + break; + + case Z_STREAM_ERROR: + /* internal libpng error */ + png_ptr->zstream.msg = PNGZ_MSG_CAST("bad parameters to zlib"); + break; + + case Z_DATA_ERROR: + png_ptr->zstream.msg = PNGZ_MSG_CAST("damaged LZ stream"); + break; + + case Z_MEM_ERROR: + png_ptr->zstream.msg = PNGZ_MSG_CAST("insufficient memory"); + break; + + case Z_BUF_ERROR: + /* End of input or output; not a problem if the caller is doing + * incremental read or write. + */ + png_ptr->zstream.msg = PNGZ_MSG_CAST("truncated"); + break; + + case Z_VERSION_ERROR: + png_ptr->zstream.msg = PNGZ_MSG_CAST("unsupported zlib version"); + break; + + case PNG_UNEXPECTED_ZLIB_RETURN: + /* Compile errors here mean that zlib now uses the value co-opted in + * pngpriv.h for PNG_UNEXPECTED_ZLIB_RETURN; update the switch above + * and change pngpriv.h. Note that this message is "... return", + * whereas the default/Z_OK one is "... return code". + */ + png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected zlib return"); + break; + } +} + +/* png_convert_size: a PNGAPI but no longer in png.h, so deleted + * at libpng 1.5.5! + */ + +/* Added at libpng version 1.2.34 and 1.4.0 (moved from pngset.c) */ +#ifdef PNG_GAMMA_SUPPORTED /* always set if COLORSPACE */ +static int +png_colorspace_check_gamma(png_const_structrp png_ptr, + png_colorspacerp colorspace, png_fixed_point gAMA, int from) + /* This is called to check a new gamma value against an existing one. The + * routine returns false if the new gamma value should not be written. + * + * 'from' says where the new gamma value comes from: + * + * 0: the new gamma value is the libpng estimate for an ICC profile + * 1: the new gamma value comes from a gAMA chunk + * 2: the new gamma value comes from an sRGB chunk + */ +{ + png_fixed_point gtest; + + if ((colorspace->flags & PNG_COLORSPACE_HAVE_GAMMA) != 0 && + (!png_muldiv(>est, colorspace->gamma, PNG_FP_1, gAMA) || + png_gamma_significant(gtest))) + { + /* Either this is an sRGB image, in which case the calculated gamma + * approximation should match, or this is an image with a profile and the + * value libpng calculates for the gamma of the profile does not match the + * value recorded in the file. The former, sRGB, case is an error, the + * latter is just a warning. + */ + if ((colorspace->flags & PNG_COLORSPACE_FROM_sRGB) != 0 || from == 2) + { + png_chunk_report(png_ptr, "gamma value does not match sRGB", + PNG_CHUNK_ERROR); + /* Do not overwrite an sRGB value */ + return from == 2; + } + + else /* sRGB tag not involved */ + { + png_chunk_report(png_ptr, "gamma value does not match libpng estimate", + PNG_CHUNK_WARNING); + return from == 1; + } + } + + return 1; +} + +void /* PRIVATE */ +png_colorspace_set_gamma(png_const_structrp png_ptr, + png_colorspacerp colorspace, png_fixed_point gAMA) +{ + /* Changed in libpng-1.5.4 to limit the values to ensure overflow can't + * occur. Since the fixed point representation is assymetrical it is + * possible for 1/gamma to overflow the limit of 21474 and this means the + * gamma value must be at least 5/100000 and hence at most 20000.0. For + * safety the limits here are a little narrower. The values are 0.00016 to + * 6250.0, which are truly ridiculous gamma values (and will produce + * displays that are all black or all white.) + * + * In 1.6.0 this test replaces the ones in pngrutil.c, in the gAMA chunk + * handling code, which only required the value to be >0. + */ + png_const_charp errmsg; + + if (gAMA < 16 || gAMA > 625000000) + errmsg = "gamma value out of range"; + +# ifdef PNG_READ_gAMA_SUPPORTED + /* Allow the application to set the gamma value more than once */ + else if ((png_ptr->mode & PNG_IS_READ_STRUCT) != 0 && + (colorspace->flags & PNG_COLORSPACE_FROM_gAMA) != 0) + errmsg = "duplicate"; +# endif + + /* Do nothing if the colorspace is already invalid */ + else if (colorspace->flags & PNG_COLORSPACE_INVALID) + return; + + else + { + if (png_colorspace_check_gamma(png_ptr, colorspace, gAMA, 1/*from gAMA*/)) + { + /* Store this gamma value. */ + colorspace->gamma = gAMA; + colorspace->flags |= + (PNG_COLORSPACE_HAVE_GAMMA | PNG_COLORSPACE_FROM_gAMA); + } + + /* At present if the check_gamma test fails the gamma of the colorspace is + * not updated however the colorspace is not invalidated. This + * corresponds to the case where the existing gamma comes from an sRGB + * chunk or profile. An error message has already been output. + */ + return; + } + + /* Error exit - errmsg has been set. */ + colorspace->flags |= PNG_COLORSPACE_INVALID; + png_chunk_report(png_ptr, errmsg, PNG_CHUNK_WRITE_ERROR); +} + +void /* PRIVATE */ +png_colorspace_sync_info(png_const_structrp png_ptr, png_inforp info_ptr) +{ + if (info_ptr->colorspace.flags & PNG_COLORSPACE_INVALID) + { + /* Everything is invalid */ + info_ptr->valid &= ~(PNG_INFO_gAMA|PNG_INFO_cHRM|PNG_INFO_sRGB| + PNG_INFO_iCCP); + +# ifdef PNG_COLORSPACE_SUPPORTED + /* Clean up the iCCP profile now if it won't be used. */ + png_free_data(png_ptr, info_ptr, PNG_FREE_ICCP, -1/*not used*/); +# else + PNG_UNUSED(png_ptr) +# endif + } + + else + { +# ifdef PNG_COLORSPACE_SUPPORTED + /* Leave the INFO_iCCP flag set if the pngset.c code has already set + * it; this allows a PNG to contain a profile which matches sRGB and + * yet still have that profile retrievable by the application. + */ + if (info_ptr->colorspace.flags & PNG_COLORSPACE_MATCHES_sRGB) + info_ptr->valid |= PNG_INFO_sRGB; + + else + info_ptr->valid &= ~PNG_INFO_sRGB; + + if (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS) + info_ptr->valid |= PNG_INFO_cHRM; + + else + info_ptr->valid &= ~PNG_INFO_cHRM; +# endif + + if (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_GAMMA) + info_ptr->valid |= PNG_INFO_gAMA; + + else + info_ptr->valid &= ~PNG_INFO_gAMA; + } +} + +#ifdef PNG_READ_SUPPORTED +void /* PRIVATE */ +png_colorspace_sync(png_const_structrp png_ptr, png_inforp info_ptr) +{ + if (info_ptr == NULL) /* reduce code size; check here not in the caller */ + return; + + info_ptr->colorspace = png_ptr->colorspace; + png_colorspace_sync_info(png_ptr, info_ptr); +} +#endif +#endif + +#ifdef PNG_COLORSPACE_SUPPORTED +/* Added at libpng-1.5.5 to support read and write of true CIEXYZ values for + * cHRM, as opposed to using chromaticities. These internal APIs return + * non-zero on a parameter error. The X, Y and Z values are required to be + * positive and less than 1.0. + */ +static int +png_xy_from_XYZ(png_xy *xy, const png_XYZ *XYZ) +{ + png_int_32 d, dwhite, whiteX, whiteY; + + d = XYZ->red_X + XYZ->red_Y + XYZ->red_Z; + if (!png_muldiv(&xy->redx, XYZ->red_X, PNG_FP_1, d)) return 1; + if (!png_muldiv(&xy->redy, XYZ->red_Y, PNG_FP_1, d)) return 1; + dwhite = d; + whiteX = XYZ->red_X; + whiteY = XYZ->red_Y; + + d = XYZ->green_X + XYZ->green_Y + XYZ->green_Z; + if (!png_muldiv(&xy->greenx, XYZ->green_X, PNG_FP_1, d)) return 1; + if (!png_muldiv(&xy->greeny, XYZ->green_Y, PNG_FP_1, d)) return 1; + dwhite += d; + whiteX += XYZ->green_X; + whiteY += XYZ->green_Y; + + d = XYZ->blue_X + XYZ->blue_Y + XYZ->blue_Z; + if (!png_muldiv(&xy->bluex, XYZ->blue_X, PNG_FP_1, d)) return 1; + if (!png_muldiv(&xy->bluey, XYZ->blue_Y, PNG_FP_1, d)) return 1; + dwhite += d; + whiteX += XYZ->blue_X; + whiteY += XYZ->blue_Y; + + /* The reference white is simply the sum of the end-point (X,Y,Z) vectors, + * thus: + */ + if (!png_muldiv(&xy->whitex, whiteX, PNG_FP_1, dwhite)) return 1; + if (!png_muldiv(&xy->whitey, whiteY, PNG_FP_1, dwhite)) return 1; + + return 0; +} + +static int +png_XYZ_from_xy(png_XYZ *XYZ, const png_xy *xy) +{ + png_fixed_point red_inverse, green_inverse, blue_scale; + png_fixed_point left, right, denominator; + + /* Check xy and, implicitly, z. Note that wide gamut color spaces typically + * have end points with 0 tristimulus values (these are impossible end + * points, but they are used to cover the possible colors.) + */ + if (xy->redx < 0 || xy->redx > PNG_FP_1) return 1; + if (xy->redy < 0 || xy->redy > PNG_FP_1-xy->redx) return 1; + if (xy->greenx < 0 || xy->greenx > PNG_FP_1) return 1; + if (xy->greeny < 0 || xy->greeny > PNG_FP_1-xy->greenx) return 1; + if (xy->bluex < 0 || xy->bluex > PNG_FP_1) return 1; + if (xy->bluey < 0 || xy->bluey > PNG_FP_1-xy->bluex) return 1; + if (xy->whitex < 0 || xy->whitex > PNG_FP_1) return 1; + if (xy->whitey < 0 || xy->whitey > PNG_FP_1-xy->whitex) return 1; + + /* The reverse calculation is more difficult because the original tristimulus + * value had 9 independent values (red,green,blue)x(X,Y,Z) however only 8 + * derived values were recorded in the cHRM chunk; + * (red,green,blue,white)x(x,y). This loses one degree of freedom and + * therefore an arbitrary ninth value has to be introduced to undo the + * original transformations. + * + * Think of the original end-points as points in (X,Y,Z) space. The + * chromaticity values (c) have the property: + * + * C + * c = --------- + * X + Y + Z + * + * For each c (x,y,z) from the corresponding original C (X,Y,Z). Thus the + * three chromaticity values (x,y,z) for each end-point obey the + * relationship: + * + * x + y + z = 1 + * + * This describes the plane in (X,Y,Z) space that intersects each axis at the + * value 1.0; call this the chromaticity plane. Thus the chromaticity + * calculation has scaled each end-point so that it is on the x+y+z=1 plane + * and chromaticity is the intersection of the vector from the origin to the + * (X,Y,Z) value with the chromaticity plane. + * + * To fully invert the chromaticity calculation we would need the three + * end-point scale factors, (red-scale, green-scale, blue-scale), but these + * were not recorded. Instead we calculated the reference white (X,Y,Z) and + * recorded the chromaticity of this. The reference white (X,Y,Z) would have + * given all three of the scale factors since: + * + * color-C = color-c * color-scale + * white-C = red-C + green-C + blue-C + * = red-c*red-scale + green-c*green-scale + blue-c*blue-scale + * + * But cHRM records only white-x and white-y, so we have lost the white scale + * factor: + * + * white-C = white-c*white-scale + * + * To handle this the inverse transformation makes an arbitrary assumption + * about white-scale: + * + * Assume: white-Y = 1.0 + * Hence: white-scale = 1/white-y + * Or: red-Y + green-Y + blue-Y = 1.0 + * + * Notice the last statement of the assumption gives an equation in three of + * the nine values we want to calculate. 8 more equations come from the + * above routine as summarised at the top above (the chromaticity + * calculation): + * + * Given: color-x = color-X / (color-X + color-Y + color-Z) + * Hence: (color-x - 1)*color-X + color.x*color-Y + color.x*color-Z = 0 + * + * This is 9 simultaneous equations in the 9 variables "color-C" and can be + * solved by Cramer's rule. Cramer's rule requires calculating 10 9x9 matrix + * determinants, however this is not as bad as it seems because only 28 of + * the total of 90 terms in the various matrices are non-zero. Nevertheless + * Cramer's rule is notoriously numerically unstable because the determinant + * calculation involves the difference of large, but similar, numbers. It is + * difficult to be sure that the calculation is stable for real world values + * and it is certain that it becomes unstable where the end points are close + * together. + * + * So this code uses the perhaps slightly less optimal but more + * understandable and totally obvious approach of calculating color-scale. + * + * This algorithm depends on the precision in white-scale and that is + * (1/white-y), so we can immediately see that as white-y approaches 0 the + * accuracy inherent in the cHRM chunk drops off substantially. + * + * libpng arithmetic: a simple invertion of the above equations + * ------------------------------------------------------------ + * + * white_scale = 1/white-y + * white-X = white-x * white-scale + * white-Y = 1.0 + * white-Z = (1 - white-x - white-y) * white_scale + * + * white-C = red-C + green-C + blue-C + * = red-c*red-scale + green-c*green-scale + blue-c*blue-scale + * + * This gives us three equations in (red-scale,green-scale,blue-scale) where + * all the coefficients are now known: + * + * red-x*red-scale + green-x*green-scale + blue-x*blue-scale + * = white-x/white-y + * red-y*red-scale + green-y*green-scale + blue-y*blue-scale = 1 + * red-z*red-scale + green-z*green-scale + blue-z*blue-scale + * = (1 - white-x - white-y)/white-y + * + * In the last equation color-z is (1 - color-x - color-y) so we can add all + * three equations together to get an alternative third: + * + * red-scale + green-scale + blue-scale = 1/white-y = white-scale + * + * So now we have a Cramer's rule solution where the determinants are just + * 3x3 - far more tractible. Unfortunately 3x3 determinants still involve + * multiplication of three coefficients so we can't guarantee to avoid + * overflow in the libpng fixed point representation. Using Cramer's rule in + * floating point is probably a good choice here, but it's not an option for + * fixed point. Instead proceed to simplify the first two equations by + * eliminating what is likely to be the largest value, blue-scale: + * + * blue-scale = white-scale - red-scale - green-scale + * + * Hence: + * + * (red-x - blue-x)*red-scale + (green-x - blue-x)*green-scale = + * (white-x - blue-x)*white-scale + * + * (red-y - blue-y)*red-scale + (green-y - blue-y)*green-scale = + * 1 - blue-y*white-scale + * + * And now we can trivially solve for (red-scale,green-scale): + * + * green-scale = + * (white-x - blue-x)*white-scale - (red-x - blue-x)*red-scale + * ----------------------------------------------------------- + * green-x - blue-x + * + * red-scale = + * 1 - blue-y*white-scale - (green-y - blue-y) * green-scale + * --------------------------------------------------------- + * red-y - blue-y + * + * Hence: + * + * red-scale = + * ( (green-x - blue-x) * (white-y - blue-y) - + * (green-y - blue-y) * (white-x - blue-x) ) / white-y + * ------------------------------------------------------------------------- + * (green-x - blue-x)*(red-y - blue-y)-(green-y - blue-y)*(red-x - blue-x) + * + * green-scale = + * ( (red-y - blue-y) * (white-x - blue-x) - + * (red-x - blue-x) * (white-y - blue-y) ) / white-y + * ------------------------------------------------------------------------- + * (green-x - blue-x)*(red-y - blue-y)-(green-y - blue-y)*(red-x - blue-x) + * + * Accuracy: + * The input values have 5 decimal digits of accuracy. The values are all in + * the range 0 < value < 1, so simple products are in the same range but may + * need up to 10 decimal digits to preserve the original precision and avoid + * underflow. Because we are using a 32-bit signed representation we cannot + * match this; the best is a little over 9 decimal digits, less than 10. + * + * The approach used here is to preserve the maximum precision within the + * signed representation. Because the red-scale calculation above uses the + * difference between two products of values that must be in the range -1..+1 + * it is sufficient to divide the product by 7; ceil(100,000/32767*2). The + * factor is irrelevant in the calculation because it is applied to both + * numerator and denominator. + * + * Note that the values of the differences of the products of the + * chromaticities in the above equations tend to be small, for example for + * the sRGB chromaticities they are: + * + * red numerator: -0.04751 + * green numerator: -0.08788 + * denominator: -0.2241 (without white-y multiplication) + * + * The resultant Y coefficients from the chromaticities of some widely used + * color space definitions are (to 15 decimal places): + * + * sRGB + * 0.212639005871510 0.715168678767756 0.072192315360734 + * Kodak ProPhoto + * 0.288071128229293 0.711843217810102 0.000085653960605 + * Adobe RGB + * 0.297344975250536 0.627363566255466 0.075291458493998 + * Adobe Wide Gamut RGB + * 0.258728243040113 0.724682314948566 0.016589442011321 + */ + /* By the argument, above overflow should be impossible here. The return + * value of 2 indicates an internal error to the caller. + */ + if (!png_muldiv(&left, xy->greenx-xy->bluex, xy->redy - xy->bluey, 7)) + return 2; + if (!png_muldiv(&right, xy->greeny-xy->bluey, xy->redx - xy->bluex, 7)) + return 2; + denominator = left - right; + + /* Now find the red numerator. */ + if (!png_muldiv(&left, xy->greenx-xy->bluex, xy->whitey-xy->bluey, 7)) + return 2; + if (!png_muldiv(&right, xy->greeny-xy->bluey, xy->whitex-xy->bluex, 7)) + return 2; + + /* Overflow is possible here and it indicates an extreme set of PNG cHRM + * chunk values. This calculation actually returns the reciprocal of the + * scale value because this allows us to delay the multiplication of white-y + * into the denominator, which tends to produce a small number. + */ + if (!png_muldiv(&red_inverse, xy->whitey, denominator, left-right) || + red_inverse <= xy->whitey /* r+g+b scales = white scale */) + return 1; + + /* Similarly for green_inverse: */ + if (!png_muldiv(&left, xy->redy-xy->bluey, xy->whitex-xy->bluex, 7)) + return 2; + if (!png_muldiv(&right, xy->redx-xy->bluex, xy->whitey-xy->bluey, 7)) + return 2; + if (!png_muldiv(&green_inverse, xy->whitey, denominator, left-right) || + green_inverse <= xy->whitey) + return 1; + + /* And the blue scale, the checks above guarantee this can't overflow but it + * can still produce 0 for extreme cHRM values. + */ + blue_scale = png_reciprocal(xy->whitey) - png_reciprocal(red_inverse) - + png_reciprocal(green_inverse); + if (blue_scale <= 0) return 1; + + + /* And fill in the png_XYZ: */ + if (!png_muldiv(&XYZ->red_X, xy->redx, PNG_FP_1, red_inverse)) return 1; + if (!png_muldiv(&XYZ->red_Y, xy->redy, PNG_FP_1, red_inverse)) return 1; + if (!png_muldiv(&XYZ->red_Z, PNG_FP_1 - xy->redx - xy->redy, PNG_FP_1, + red_inverse)) + return 1; + + if (!png_muldiv(&XYZ->green_X, xy->greenx, PNG_FP_1, green_inverse)) + return 1; + if (!png_muldiv(&XYZ->green_Y, xy->greeny, PNG_FP_1, green_inverse)) + return 1; + if (!png_muldiv(&XYZ->green_Z, PNG_FP_1 - xy->greenx - xy->greeny, PNG_FP_1, + green_inverse)) + return 1; + + if (!png_muldiv(&XYZ->blue_X, xy->bluex, blue_scale, PNG_FP_1)) return 1; + if (!png_muldiv(&XYZ->blue_Y, xy->bluey, blue_scale, PNG_FP_1)) return 1; + if (!png_muldiv(&XYZ->blue_Z, PNG_FP_1 - xy->bluex - xy->bluey, blue_scale, + PNG_FP_1)) + return 1; + + return 0; /*success*/ +} + +static int +png_XYZ_normalize(png_XYZ *XYZ) +{ + png_int_32 Y; + + if (XYZ->red_Y < 0 || XYZ->green_Y < 0 || XYZ->blue_Y < 0 || + XYZ->red_X < 0 || XYZ->green_X < 0 || XYZ->blue_X < 0 || + XYZ->red_Z < 0 || XYZ->green_Z < 0 || XYZ->blue_Z < 0) + return 1; + + /* Normalize by scaling so the sum of the end-point Y values is PNG_FP_1. + * IMPLEMENTATION NOTE: ANSI requires signed overflow not to occur, therefore + * relying on addition of two positive values producing a negative one is not + * safe. + */ + Y = XYZ->red_Y; + if (0x7fffffff - Y < XYZ->green_X) return 1; + Y += XYZ->green_Y; + if (0x7fffffff - Y < XYZ->blue_X) return 1; + Y += XYZ->blue_Y; + + if (Y != PNG_FP_1) + { + if (!png_muldiv(&XYZ->red_X, XYZ->red_X, PNG_FP_1, Y)) return 1; + if (!png_muldiv(&XYZ->red_Y, XYZ->red_Y, PNG_FP_1, Y)) return 1; + if (!png_muldiv(&XYZ->red_Z, XYZ->red_Z, PNG_FP_1, Y)) return 1; + + if (!png_muldiv(&XYZ->green_X, XYZ->green_X, PNG_FP_1, Y)) return 1; + if (!png_muldiv(&XYZ->green_Y, XYZ->green_Y, PNG_FP_1, Y)) return 1; + if (!png_muldiv(&XYZ->green_Z, XYZ->green_Z, PNG_FP_1, Y)) return 1; + + if (!png_muldiv(&XYZ->blue_X, XYZ->blue_X, PNG_FP_1, Y)) return 1; + if (!png_muldiv(&XYZ->blue_Y, XYZ->blue_Y, PNG_FP_1, Y)) return 1; + if (!png_muldiv(&XYZ->blue_Z, XYZ->blue_Z, PNG_FP_1, Y)) return 1; + } + + return 0; +} + +static int +png_colorspace_endpoints_match(const png_xy *xy1, const png_xy *xy2, int delta) +{ + /* Allow an error of +/-0.01 (absolute value) on each chromaticity */ + return !(PNG_OUT_OF_RANGE(xy1->whitex, xy2->whitex,delta) || + PNG_OUT_OF_RANGE(xy1->whitey, xy2->whitey,delta) || + PNG_OUT_OF_RANGE(xy1->redx, xy2->redx, delta) || + PNG_OUT_OF_RANGE(xy1->redy, xy2->redy, delta) || + PNG_OUT_OF_RANGE(xy1->greenx, xy2->greenx,delta) || + PNG_OUT_OF_RANGE(xy1->greeny, xy2->greeny,delta) || + PNG_OUT_OF_RANGE(xy1->bluex, xy2->bluex, delta) || + PNG_OUT_OF_RANGE(xy1->bluey, xy2->bluey, delta)); +} + +/* Added in libpng-1.6.0, a different check for the validity of a set of cHRM + * chunk chromaticities. Earlier checks used to simply look for the overflow + * condition (where the determinant of the matrix to solve for XYZ ends up zero + * because the chromaticity values are not all distinct.) Despite this it is + * theoretically possible to produce chromaticities that are apparently valid + * but that rapidly degrade to invalid, potentially crashing, sets because of + * arithmetic inaccuracies when calculations are performed on them. The new + * check is to round-trip xy -> XYZ -> xy and then check that the result is + * within a small percentage of the original. + */ +static int +png_colorspace_check_xy(png_XYZ *XYZ, const png_xy *xy) +{ + int result; + png_xy xy_test; + + /* As a side-effect this routine also returns the XYZ endpoints. */ + result = png_XYZ_from_xy(XYZ, xy); + if (result) return result; + + result = png_xy_from_XYZ(&xy_test, XYZ); + if (result) return result; + + if (png_colorspace_endpoints_match(xy, &xy_test, + 5/*actually, the math is pretty accurate*/)) + return 0; + + /* Too much slip */ + return 1; +} + +/* This is the check going the other way. The XYZ is modified to normalize it + * (another side-effect) and the xy chromaticities are returned. + */ +static int +png_colorspace_check_XYZ(png_xy *xy, png_XYZ *XYZ) +{ + int result; + png_XYZ XYZtemp; + + result = png_XYZ_normalize(XYZ); + if (result) return result; + + result = png_xy_from_XYZ(xy, XYZ); + if (result) return result; + + XYZtemp = *XYZ; + return png_colorspace_check_xy(&XYZtemp, xy); +} + +/* Used to check for an endpoint match against sRGB */ +static const png_xy sRGB_xy = /* From ITU-R BT.709-3 */ +{ + /* color x y */ + /* red */ 64000, 33000, + /* green */ 30000, 60000, + /* blue */ 15000, 6000, + /* white */ 31270, 32900 +}; + +static int +png_colorspace_set_xy_and_XYZ(png_const_structrp png_ptr, + png_colorspacerp colorspace, const png_xy *xy, const png_XYZ *XYZ, + int preferred) +{ + if (colorspace->flags & PNG_COLORSPACE_INVALID) + return 0; + + /* The consistency check is performed on the chromaticities; this factors out + * variations because of the normalization (or not) of the end point Y + * values. + */ + if (preferred < 2 && (colorspace->flags & PNG_COLORSPACE_HAVE_ENDPOINTS)) + { + /* The end points must be reasonably close to any we already have. The + * following allows an error of up to +/-.001 + */ + if (!png_colorspace_endpoints_match(xy, &colorspace->end_points_xy, 100)) + { + colorspace->flags |= PNG_COLORSPACE_INVALID; + png_benign_error(png_ptr, "inconsistent chromaticities"); + return 0; /* failed */ + } + + /* Only overwrite with preferred values */ + if (!preferred) + return 1; /* ok, but no change */ + } + + colorspace->end_points_xy = *xy; + colorspace->end_points_XYZ = *XYZ; + colorspace->flags |= PNG_COLORSPACE_HAVE_ENDPOINTS; + + /* The end points are normally quoted to two decimal digits, so allow +/-0.01 + * on this test. + */ + if (png_colorspace_endpoints_match(xy, &sRGB_xy, 1000)) + colorspace->flags |= PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB; + + else + colorspace->flags &= PNG_COLORSPACE_CANCEL( + PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB); + + return 2; /* ok and changed */ +} + +int /* PRIVATE */ +png_colorspace_set_chromaticities(png_const_structrp png_ptr, + png_colorspacerp colorspace, const png_xy *xy, int preferred) +{ + /* We must check the end points to ensure they are reasonable - in the past + * color management systems have crashed as a result of getting bogus + * colorant values, while this isn't the fault of libpng it is the + * responsibility of libpng because PNG carries the bomb and libpng is in a + * position to protect against it. + */ + png_XYZ XYZ; + + switch (png_colorspace_check_xy(&XYZ, xy)) + { + case 0: /* success */ + return png_colorspace_set_xy_and_XYZ(png_ptr, colorspace, xy, &XYZ, + preferred); + + case 1: + /* We can't invert the chromaticities so we can't produce value XYZ + * values. Likely as not a color management system will fail too. + */ + colorspace->flags |= PNG_COLORSPACE_INVALID; + png_benign_error(png_ptr, "invalid chromaticities"); + break; + + default: + /* libpng is broken; this should be a warning but if it happens we + * want error reports so for the moment it is an error. + */ + colorspace->flags |= PNG_COLORSPACE_INVALID; + png_error(png_ptr, "internal error checking chromaticities"); + break; + } + + return 0; /* failed */ +} + +int /* PRIVATE */ +png_colorspace_set_endpoints(png_const_structrp png_ptr, + png_colorspacerp colorspace, const png_XYZ *XYZ_in, int preferred) +{ + png_XYZ XYZ = *XYZ_in; + png_xy xy; + + switch (png_colorspace_check_XYZ(&xy, &XYZ)) + { + case 0: + return png_colorspace_set_xy_and_XYZ(png_ptr, colorspace, &xy, &XYZ, + preferred); + + case 1: + /* End points are invalid. */ + colorspace->flags |= PNG_COLORSPACE_INVALID; + png_benign_error(png_ptr, "invalid end points"); + break; + + default: + colorspace->flags |= PNG_COLORSPACE_INVALID; + png_error(png_ptr, "internal error checking chromaticities"); + break; + } + + return 0; /* failed */ +} + +#if defined(PNG_sRGB_SUPPORTED) || defined(PNG_iCCP_SUPPORTED) +/* Error message generation */ +static char +png_icc_tag_char(png_uint_32 byte) +{ + byte &= 0xff; + if (byte >= 32 && byte <= 126) + return (char)byte; + else + return '?'; +} + +static void +png_icc_tag_name(char *name, png_uint_32 tag) +{ + name[0] = '\''; + name[1] = png_icc_tag_char(tag >> 24); + name[2] = png_icc_tag_char(tag >> 16); + name[3] = png_icc_tag_char(tag >> 8); + name[4] = png_icc_tag_char(tag ); + name[5] = '\''; +} + +static int +is_ICC_signature_char(png_alloc_size_t it) +{ + return it == 32 || (it >= 48 && it <= 57) || (it >= 65 && it <= 90) || + (it >= 97 && it <= 122); +} + +static int is_ICC_signature(png_alloc_size_t it) +{ + return is_ICC_signature_char(it >> 24) /* checks all the top bits */ && + is_ICC_signature_char((it >> 16) & 0xff) && + is_ICC_signature_char((it >> 8) & 0xff) && + is_ICC_signature_char(it & 0xff); +} + +static int +png_icc_profile_error(png_const_structrp png_ptr, png_colorspacerp colorspace, + png_const_charp name, png_alloc_size_t value, png_const_charp reason) +{ + size_t pos; + char message[196]; /* see below for calculation */ + + if (colorspace != NULL) + colorspace->flags |= PNG_COLORSPACE_INVALID; + + pos = png_safecat(message, (sizeof message), 0, "profile '"); /* 9 chars */ + pos = png_safecat(message, pos+79, pos, name); /* Truncate to 79 chars */ + pos = png_safecat(message, (sizeof message), pos, "': "); /* +2 = 90 */ + if (is_ICC_signature(value)) + { + /* So 'value' is at most 4 bytes and the following cast is safe */ + png_icc_tag_name(message+pos, (png_uint_32)value); + pos += 6; /* total +8; less than the else clause */ + message[pos++] = ':'; + message[pos++] = ' '; + } +# ifdef PNG_WARNINGS_SUPPORTED + else + { + char number[PNG_NUMBER_BUFFER_SIZE]; /* +24 = 114*/ + + pos = png_safecat(message, (sizeof message), pos, + png_format_number(number, number+(sizeof number), + PNG_NUMBER_FORMAT_x, value)); + pos = png_safecat(message, (sizeof message), pos, "h: "); /*+2 = 116*/ + } +# endif + /* The 'reason' is an arbitrary message, allow +79 maximum 195 */ + pos = png_safecat(message, (sizeof message), pos, reason); + + /* This is recoverable, but make it unconditionally an app_error on write to + * avoid writing invalid ICC profiles into PNG files. (I.e. we handle them + * on read, with a warning, but on write unless the app turns off + * application errors the PNG won't be written.) + */ + png_chunk_report(png_ptr, message, + (colorspace != NULL) ? PNG_CHUNK_ERROR : PNG_CHUNK_WRITE_ERROR); + + return 0; +} +#endif /* sRGB || iCCP */ + +#ifdef PNG_sRGB_SUPPORTED +int /* PRIVATE */ +png_colorspace_set_sRGB(png_const_structrp png_ptr, png_colorspacerp colorspace, + int intent) +{ + /* sRGB sets known gamma, end points and (from the chunk) intent. */ + /* IMPORTANT: these are not necessarily the values found in an ICC profile + * because ICC profiles store values adapted to a D50 environment; it is + * expected that the ICC profile mediaWhitePointTag will be D50, see the + * checks and code elsewhere to understand this better. + * + * These XYZ values, which are accurate to 5dp, produce rgb to gray + * coefficients of (6968,23435,2366), which are reduced (because they add up + * to 32769 not 32768) to (6968,23434,2366). These are the values that + * libpng has traditionally used (and are the best values given the 15bit + * algorithm used by the rgb to gray code.) + */ + static const png_XYZ sRGB_XYZ = /* D65 XYZ (*not* the D50 adapted values!) */ + { + /* color X Y Z */ + /* red */ 41239, 21264, 1933, + /* green */ 35758, 71517, 11919, + /* blue */ 18048, 7219, 95053 + }; + + /* Do nothing if the colorspace is already invalidated. */ + if (colorspace->flags & PNG_COLORSPACE_INVALID) + return 0; + + /* Check the intent, then check for existing settings. It is valid for the + * PNG file to have cHRM or gAMA chunks along with sRGB, but the values must + * be consistent with the correct values. If, however, this function is + * called below because an iCCP chunk matches sRGB then it is quite + * conceivable that an older app recorded incorrect gAMA and cHRM because of + * an incorrect calculation based on the values in the profile - this does + * *not* invalidate the profile (though it still produces an error, which can + * be ignored.) + */ + if (intent < 0 || intent >= PNG_sRGB_INTENT_LAST) + return png_icc_profile_error(png_ptr, colorspace, "sRGB", + (unsigned)intent, "invalid sRGB rendering intent"); + + if ((colorspace->flags & PNG_COLORSPACE_HAVE_INTENT) != 0 && + colorspace->rendering_intent != intent) + return png_icc_profile_error(png_ptr, colorspace, "sRGB", + (unsigned)intent, "inconsistent rendering intents"); + + if ((colorspace->flags & PNG_COLORSPACE_FROM_sRGB) != 0) + { + png_benign_error(png_ptr, "duplicate sRGB information ignored"); + return 0; + } + + /* If the standard sRGB cHRM chunk does not match the one from the PNG file + * warn but overwrite the value with the correct one. + */ + if ((colorspace->flags & PNG_COLORSPACE_HAVE_ENDPOINTS) != 0 && + !png_colorspace_endpoints_match(&sRGB_xy, &colorspace->end_points_xy, + 100)) + png_chunk_report(png_ptr, "cHRM chunk does not match sRGB", + PNG_CHUNK_ERROR); + + /* This check is just done for the error reporting - the routine always + * returns true when the 'from' argument corresponds to sRGB (2). + */ + (void)png_colorspace_check_gamma(png_ptr, colorspace, PNG_GAMMA_sRGB_INVERSE, + 2/*from sRGB*/); + + /* intent: bugs in GCC force 'int' to be used as the parameter type. */ + colorspace->rendering_intent = (png_uint_16)intent; + colorspace->flags |= PNG_COLORSPACE_HAVE_INTENT; + + /* endpoints */ + colorspace->end_points_xy = sRGB_xy; + colorspace->end_points_XYZ = sRGB_XYZ; + colorspace->flags |= + (PNG_COLORSPACE_HAVE_ENDPOINTS|PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB); + + /* gamma */ + colorspace->gamma = PNG_GAMMA_sRGB_INVERSE; + colorspace->flags |= PNG_COLORSPACE_HAVE_GAMMA; + + /* Finally record that we have an sRGB profile */ + colorspace->flags |= + (PNG_COLORSPACE_MATCHES_sRGB|PNG_COLORSPACE_FROM_sRGB); + + return 1; /* set */ +} +#endif /* sRGB */ + +#ifdef PNG_iCCP_SUPPORTED +/* Encoded value of D50 as an ICC XYZNumber. From the ICC 2010 spec the value + * is XYZ(0.9642,1.0,0.8249), which scales to: + * + * (63189.8112, 65536, 54060.6464) + */ +static const png_byte D50_nCIEXYZ[12] = + { 0x00, 0x00, 0xf6, 0xd6, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0xd3, 0x2d }; + +int /* PRIVATE */ +png_icc_check_length(png_const_structrp png_ptr, png_colorspacerp colorspace, + png_const_charp name, png_uint_32 profile_length) +{ + if (profile_length < 132) + return png_icc_profile_error(png_ptr, colorspace, name, profile_length, + "too short"); + + if (profile_length & 3) + return png_icc_profile_error(png_ptr, colorspace, name, profile_length, + "invalid length"); + + return 1; +} + +int /* PRIVATE */ +png_icc_check_header(png_const_structrp png_ptr, png_colorspacerp colorspace, + png_const_charp name, png_uint_32 profile_length, + png_const_bytep profile/* first 132 bytes only */, int color_type) +{ + png_uint_32 temp; + + /* Length check; this cannot be ignored in this code because profile_length + * is used later to check the tag table, so even if the profile seems over + * long profile_length from the caller must be correct. The caller can fix + * this up on read or write by just passing in the profile header length. + */ + temp = png_get_uint_32(profile); + if (temp != profile_length) + return png_icc_profile_error(png_ptr, colorspace, name, temp, + "length does not match profile"); + + temp = png_get_uint_32(profile+128); /* tag count: 12 bytes/tag */ + if (temp > 357913930 || /* (2^32-4-132)/12: maximum possible tag count */ + profile_length < 132+12*temp) /* truncated tag table */ + return png_icc_profile_error(png_ptr, colorspace, name, temp, + "tag count too large"); + + /* The 'intent' must be valid or we can't store it, ICC limits the intent to + * 16 bits. + */ + temp = png_get_uint_32(profile+64); + if (temp >= 0xffff) /* The ICC limit */ + return png_icc_profile_error(png_ptr, colorspace, name, temp, + "invalid rendering intent"); + + /* This is just a warning because the profile may be valid in future + * versions. + */ + if (temp >= PNG_sRGB_INTENT_LAST) + (void)png_icc_profile_error(png_ptr, NULL, name, temp, + "intent outside defined range"); + + /* At this point the tag table can't be checked because it hasn't necessarily + * been loaded; however, various header fields can be checked. These checks + * are for values permitted by the PNG spec in an ICC profile; the PNG spec + * restricts the profiles that can be passed in an iCCP chunk (they must be + * appropriate to processing PNG data!) + */ + + /* Data checks (could be skipped). These checks must be independent of the + * version number; however, the version number doesn't accomodate changes in + * the header fields (just the known tags and the interpretation of the + * data.) + */ + temp = png_get_uint_32(profile+36); /* signature 'ascp' */ + if (temp != 0x61637370) + return png_icc_profile_error(png_ptr, colorspace, name, temp, + "invalid signature"); + + /* Currently the PCS illuminant/adopted white point (the computational + * white point) are required to be D50, + * however the profile contains a record of the illuminant so perhaps ICC + * expects to be able to change this in the future (despite the rationale in + * the introduction for using a fixed PCS adopted white.) Consequently the + * following is just a warning. + */ + if (memcmp(profile+68, D50_nCIEXYZ, 12) != 0) + (void)png_icc_profile_error(png_ptr, NULL, name, 0/*no tag value*/, + "PCS illuminant is not D50"); + + /* The PNG spec requires this: + * "If the iCCP chunk is present, the image samples conform to the colour + * space represented by the embedded ICC profile as defined by the + * International Color Consortium [ICC]. The colour space of the ICC profile + * shall be an RGB colour space for colour images (PNG colour types 2, 3, and + * 6), or a greyscale colour space for greyscale images (PNG colour types 0 + * and 4)." + * + * This checking code ensures the embedded profile (on either read or write) + * conforms to the specification requirements. Notice that an ICC 'gray' + * color-space profile contains the information to transform the monochrome + * data to XYZ or L*a*b (according to which PCS the profile uses) and this + * should be used in preference to the standard libpng K channel replication + * into R, G and B channels. + * + * Previously it was suggested that an RGB profile on grayscale data could be + * handled. However it it is clear that using an RGB profile in this context + * must be an error - there is no specification of what it means. Thus it is + * almost certainly more correct to ignore the profile. + */ + temp = png_get_uint_32(profile+16); /* data colour space field */ + switch (temp) + { + case 0x52474220: /* 'RGB ' */ + if (!(color_type & PNG_COLOR_MASK_COLOR)) + return png_icc_profile_error(png_ptr, colorspace, name, temp, + "RGB color space not permitted on grayscale PNG"); + break; + + case 0x47524159: /* 'GRAY' */ + if (color_type & PNG_COLOR_MASK_COLOR) + return png_icc_profile_error(png_ptr, colorspace, name, temp, + "Gray color space not permitted on RGB PNG"); + break; + + default: + return png_icc_profile_error(png_ptr, colorspace, name, temp, + "invalid ICC profile color space"); + } + + /* It is up to the application to check that the profile class matches the + * application requirements; the spec provides no guidance, but it's pretty + * weird if the profile is not scanner ('scnr'), monitor ('mntr'), printer + * ('prtr') or 'spac' (for generic color spaces). Issue a warning in these + * cases. Issue an error for device link or abstract profiles - these don't + * contain the records necessary to transform the color-space to anything + * other than the target device (and not even that for an abstract profile). + * Profiles of these classes may not be embedded in images. + */ + temp = png_get_uint_32(profile+12); /* profile/device class */ + switch (temp) + { + case 0x73636E72: /* 'scnr' */ + case 0x6D6E7472: /* 'mntr' */ + case 0x70727472: /* 'prtr' */ + case 0x73706163: /* 'spac' */ + /* All supported */ + break; + + case 0x61627374: /* 'abst' */ + /* May not be embedded in an image */ + return png_icc_profile_error(png_ptr, colorspace, name, temp, + "invalid embedded Abstract ICC profile"); + + case 0x6C696E6B: /* 'link' */ + /* DeviceLink profiles cannnot be interpreted in a non-device specific + * fashion, if an app uses the AToB0Tag in the profile the results are + * undefined unless the result is sent to the intended device, + * therefore a DeviceLink profile should not be found embedded in a + * PNG. + */ + return png_icc_profile_error(png_ptr, colorspace, name, temp, + "unexpected DeviceLink ICC profile class"); + + case 0x6E6D636C: /* 'nmcl' */ + /* A NamedColor profile is also device specific, however it doesn't + * contain an AToB0 tag that is open to misintrepretation. Almost + * certainly it will fail the tests below. + */ + (void)png_icc_profile_error(png_ptr, NULL, name, temp, + "unexpected NamedColor ICC profile class"); + break; + + default: + /* To allow for future enhancements to the profile accept unrecognized + * profile classes with a warning, these then hit the test below on the + * tag content to ensure they are backward compatible with one of the + * understood profiles. + */ + (void)png_icc_profile_error(png_ptr, NULL, name, temp, + "unrecognized ICC profile class"); + break; + } + + /* For any profile other than a device link one the PCS must be encoded + * either in XYZ or Lab. + */ + temp = png_get_uint_32(profile+20); + switch (temp) + { + case 0x58595A20: /* 'XYZ ' */ + case 0x4C616220: /* 'Lab ' */ + break; + + default: + return png_icc_profile_error(png_ptr, colorspace, name, temp, + "unexpected ICC PCS encoding"); + } + + return 1; +} + +int /* PRIVATE */ +png_icc_check_tag_table(png_const_structrp png_ptr, png_colorspacerp colorspace, + png_const_charp name, png_uint_32 profile_length, + png_const_bytep profile /* header plus whole tag table */) +{ + png_uint_32 tag_count = png_get_uint_32(profile+128); + png_uint_32 itag; + png_const_bytep tag = profile+132; /* The first tag */ + + /* First scan all the tags in the table and add bits to the icc_info value + * (temporarily in 'tags'). + */ + for (itag=0; itag < tag_count; ++itag, tag += 12) + { + png_uint_32 tag_id = png_get_uint_32(tag+0); + png_uint_32 tag_start = png_get_uint_32(tag+4); /* must be aligned */ + png_uint_32 tag_length = png_get_uint_32(tag+8);/* not padded */ + + /* The ICC specification does not exclude zero length tags, therefore the + * start might actually be anywhere if there is no data, but this would be + * a clear abuse of the intent of the standard so the start is checked for + * being in range. All defined tag types have an 8 byte header - a 4 byte + * type signature then 0. + */ + if ((tag_start & 3) != 0) + { + /* CNHP730S.icc shipped with Microsoft Windows 64 violates this, it is + * only a warning here because libpng does not care about the + * alignment. + */ + (void)png_icc_profile_error(png_ptr, NULL, name, tag_id, + "ICC profile tag start not a multiple of 4"); + } + + /* This is a hard error; potentially it can cause read outside the + * profile. + */ + if (tag_start > profile_length || tag_length > profile_length - tag_start) + return png_icc_profile_error(png_ptr, colorspace, name, tag_id, + "ICC profile tag outside profile"); + } + + return 1; /* success, maybe with warnings */ +} + +#ifdef PNG_sRGB_SUPPORTED +/* Information about the known ICC sRGB profiles */ +static const struct +{ + png_uint_32 adler, crc, length; + png_uint_32 md5[4]; + png_byte have_md5; + png_byte is_broken; + png_uint_16 intent; + +# define PNG_MD5(a,b,c,d) { a, b, c, d }, (a!=0)||(b!=0)||(c!=0)||(d!=0) +# define PNG_ICC_CHECKSUM(adler, crc, md5, intent, broke, date, length, fname)\ + { adler, crc, length, md5, broke, intent }, + +} png_sRGB_checks[] = +{ + /* This data comes from contrib/tools/checksum-icc run on downloads of + * all four ICC sRGB profiles from www.color.org. + */ + /* adler32, crc32, MD5[4], intent, date, length, file-name */ + PNG_ICC_CHECKSUM(0x0a3fd9f6, 0x3b8772b9, + PNG_MD5(0x29f83dde, 0xaff255ae, 0x7842fae4, 0xca83390d), 0, 0, + "2009/03/27 21:36:31", 3048, "sRGB_IEC61966-2-1_black_scaled.icc") + + /* ICC sRGB v2 perceptual no black-compensation: */ + PNG_ICC_CHECKSUM(0x4909e5e1, 0x427ebb21, + PNG_MD5(0xc95bd637, 0xe95d8a3b, 0x0df38f99, 0xc1320389), 1, 0, + "2009/03/27 21:37:45", 3052, "sRGB_IEC61966-2-1_no_black_scaling.icc") + + PNG_ICC_CHECKSUM(0xfd2144a1, 0x306fd8ae, + PNG_MD5(0xfc663378, 0x37e2886b, 0xfd72e983, 0x8228f1b8), 0, 0, + "2009/08/10 17:28:01", 60988, "sRGB_v4_ICC_preference_displayclass.icc") + + /* ICC sRGB v4 perceptual */ + PNG_ICC_CHECKSUM(0x209c35d2, 0xbbef7812, + PNG_MD5(0x34562abf, 0x994ccd06, 0x6d2c5721, 0xd0d68c5d), 0, 0, + "2007/07/25 00:05:37", 60960, "sRGB_v4_ICC_preference.icc") + + /* The following profiles have no known MD5 checksum. If there is a match + * on the (empty) MD5 the other fields are used to attempt a match and + * a warning is produced. The first two of these profiles have a 'cprt' tag + * which suggests that they were also made by Hewlett Packard. + */ + PNG_ICC_CHECKSUM(0xa054d762, 0x5d5129ce, + PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 1, 0, + "2004/07/21 18:57:42", 3024, "sRGB_IEC61966-2-1_noBPC.icc") + + /* This is a 'mntr' (display) profile with a mediaWhitePointTag that does not + * match the D50 PCS illuminant in the header (it is in fact the D65 values, + * so the white point is recorded as the un-adapted value.) The profiles + * below only differ in one byte - the intent - and are basically the same as + * the previous profile except for the mediaWhitePointTag error and a missing + * chromaticAdaptationTag. + */ + PNG_ICC_CHECKSUM(0xf784f3fb, 0x182ea552, + PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 0, 1/*broken*/, + "1998/02/09 06:49:00", 3144, "HP-Microsoft sRGB v2 perceptual") + + PNG_ICC_CHECKSUM(0x0398f3fc, 0xf29e526d, + PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 1, 1/*broken*/, + "1998/02/09 06:49:00", 3144, "HP-Microsoft sRGB v2 media-relative") +}; + +static int +png_compare_ICC_profile_with_sRGB(png_const_structrp png_ptr, + png_const_bytep profile, uLong adler) +{ + /* The quick check is to verify just the MD5 signature and trust the + * rest of the data. Because the profile has already been verified for + * correctness this is safe. png_colorspace_set_sRGB will check the 'intent' + * field too, so if the profile has been edited with an intent not defined + * by sRGB (but maybe defined by a later ICC specification) the read of + * the profile will fail at that point. + */ + png_uint_32 length = 0; + png_uint_32 intent = 0x10000; /* invalid */ +#if PNG_sRGB_PROFILE_CHECKS > 1 + uLong crc = 0; /* the value for 0 length data */ +#endif + unsigned int i; + + for (i=0; i < (sizeof png_sRGB_checks) / (sizeof png_sRGB_checks[0]); ++i) + { + if (png_get_uint_32(profile+84) == png_sRGB_checks[i].md5[0] && + png_get_uint_32(profile+88) == png_sRGB_checks[i].md5[1] && + png_get_uint_32(profile+92) == png_sRGB_checks[i].md5[2] && + png_get_uint_32(profile+96) == png_sRGB_checks[i].md5[3]) + { + /* This may be one of the old HP profiles without an MD5, in that + * case we can only use the length and Adler32 (note that these + * are not used by default if there is an MD5!) + */ +# if PNG_sRGB_PROFILE_CHECKS == 0 + if (png_sRGB_checks[i].have_md5) + return 1+png_sRGB_checks[i].is_broken; +# endif + + /* Profile is unsigned or more checks have been configured in. */ + if (length == 0) + { + length = png_get_uint_32(profile); + intent = png_get_uint_32(profile+64); + } + + /* Length *and* intent must match */ + if (length == png_sRGB_checks[i].length && + intent == png_sRGB_checks[i].intent) + { + /* Now calculate the adler32 if not done already. */ + if (adler == 0) + { + adler = adler32(0, NULL, 0); + adler = adler32(adler, profile, length); + } + + if (adler == png_sRGB_checks[i].adler) + { + /* These basic checks suggest that the data has not been + * modified, but if the check level is more than 1 perform + * our own crc32 checksum on the data. + */ +# if PNG_sRGB_PROFILE_CHECKS > 1 + if (crc == 0) + { + crc = crc32(0, NULL, 0); + crc = crc32(crc, profile, length); + } + + /* So this check must pass for the 'return' below to happen. + */ + if (crc == png_sRGB_checks[i].crc) +# endif + { + if (png_sRGB_checks[i].is_broken) + { + /* These profiles are known to have bad data that may cause + * problems if they are used, therefore attempt to + * discourage their use, skip the 'have_md5' warning below, + * which is made irrelevant by this error. + */ + png_chunk_report(png_ptr, "known incorrect sRGB profile", + PNG_CHUNK_ERROR); + } + + /* Warn that this being done; this isn't even an error since + * the profile is perfectly valid, but it would be nice if + * people used the up-to-date ones. + */ + else if (!png_sRGB_checks[i].have_md5) + { + png_chunk_report(png_ptr, + "out-of-date sRGB profile with no signature", + PNG_CHUNK_WARNING); + } + + return 1+png_sRGB_checks[i].is_broken; + } + } + } + +# if PNG_sRGB_PROFILE_CHECKS > 0 + /* The signature matched, but the profile had been changed in some + * way. This is an apparent violation of the ICC terms of use and, + * anyway, probably indicates a data error or uninformed hacking. + */ + if (png_sRGB_checks[i].have_md5) + png_benign_error(png_ptr, + "copyright violation: edited ICC profile ignored"); +# endif + } + } + + return 0; /* no match */ +} +#endif + +#ifdef PNG_sRGB_SUPPORTED +void /* PRIVATE */ +png_icc_set_sRGB(png_const_structrp png_ptr, + png_colorspacerp colorspace, png_const_bytep profile, uLong adler) +{ + /* Is this profile one of the known ICC sRGB profiles? If it is, just set + * the sRGB information. + */ + if (png_compare_ICC_profile_with_sRGB(png_ptr, profile, adler)) + (void)png_colorspace_set_sRGB(png_ptr, colorspace, + (int)/*already checked*/png_get_uint_32(profile+64)); +} +#endif /* PNG_READ_sRGB_SUPPORTED */ + +int /* PRIVATE */ +png_colorspace_set_ICC(png_const_structrp png_ptr, png_colorspacerp colorspace, + png_const_charp name, png_uint_32 profile_length, png_const_bytep profile, + int color_type) +{ + if (colorspace->flags & PNG_COLORSPACE_INVALID) + return 0; + + if (png_icc_check_length(png_ptr, colorspace, name, profile_length) && + png_icc_check_header(png_ptr, colorspace, name, profile_length, profile, + color_type) && + png_icc_check_tag_table(png_ptr, colorspace, name, profile_length, + profile)) + { +# ifdef PNG_sRGB_SUPPORTED + /* If no sRGB support, don't try storing sRGB information */ + png_icc_set_sRGB(png_ptr, colorspace, profile, 0); +# endif + return 1; + } + + /* Failure case */ + return 0; +} +#endif /* iCCP */ + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +void /* PRIVATE */ +png_colorspace_set_rgb_coefficients(png_structrp png_ptr) +{ + /* Set the rgb_to_gray coefficients from the colorspace. */ + if (!png_ptr->rgb_to_gray_coefficients_set && + (png_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS) != 0) + { + /* png_set_background has not been called, get the coefficients from the Y + * values of the colorspace colorants. + */ + png_fixed_point r = png_ptr->colorspace.end_points_XYZ.red_Y; + png_fixed_point g = png_ptr->colorspace.end_points_XYZ.green_Y; + png_fixed_point b = png_ptr->colorspace.end_points_XYZ.blue_Y; + png_fixed_point total = r+g+b; + + if (total > 0 && + r >= 0 && png_muldiv(&r, r, 32768, total) && r >= 0 && r <= 32768 && + g >= 0 && png_muldiv(&g, g, 32768, total) && g >= 0 && g <= 32768 && + b >= 0 && png_muldiv(&b, b, 32768, total) && b >= 0 && b <= 32768 && + r+g+b <= 32769) + { + /* We allow 0 coefficients here. r+g+b may be 32769 if two or + * all of the coefficients were rounded up. Handle this by + * reducing the *largest* coefficient by 1; this matches the + * approach used for the default coefficients in pngrtran.c + */ + int add = 0; + + if (r+g+b > 32768) + add = -1; + else if (r+g+b < 32768) + add = 1; + + if (add != 0) + { + if (g >= r && g >= b) + g += add; + else if (r >= g && r >= b) + r += add; + else + b += add; + } + + /* Check for an internal error. */ + if (r+g+b != 32768) + png_error(png_ptr, + "internal error handling cHRM coefficients"); + + else + { + png_ptr->rgb_to_gray_red_coeff = (png_uint_16)r; + png_ptr->rgb_to_gray_green_coeff = (png_uint_16)g; + } + } + + /* This is a png_error at present even though it could be ignored - + * it should never happen, but it is important that if it does, the + * bug is fixed. + */ + else + png_error(png_ptr, "internal error handling cHRM->XYZ"); + } +} +#endif + +#endif /* COLORSPACE */ + +void /* PRIVATE */ +png_check_IHDR(png_const_structrp png_ptr, + png_uint_32 width, png_uint_32 height, int bit_depth, + int color_type, int interlace_type, int compression_type, + int filter_type) +{ + int error = 0; + + /* Check for width and height valid values */ + if (width == 0) + { + png_warning(png_ptr, "Image width is zero in IHDR"); + error = 1; + } + + if (height == 0) + { + png_warning(png_ptr, "Image height is zero in IHDR"); + error = 1; + } + +# ifdef PNG_SET_USER_LIMITS_SUPPORTED + if (width > png_ptr->user_width_max) + +# else + if (width > PNG_USER_WIDTH_MAX) +# endif + { + png_warning(png_ptr, "Image width exceeds user limit in IHDR"); + error = 1; + } + +# ifdef PNG_SET_USER_LIMITS_SUPPORTED + if (height > png_ptr->user_height_max) +# else + if (height > PNG_USER_HEIGHT_MAX) +# endif + { + png_warning(png_ptr, "Image height exceeds user limit in IHDR"); + error = 1; + } + + if (width > PNG_UINT_31_MAX) + { + png_warning(png_ptr, "Invalid image width in IHDR"); + error = 1; + } + + if (height > PNG_UINT_31_MAX) + { + png_warning(png_ptr, "Invalid image height in IHDR"); + error = 1; + } + + if (width > (PNG_UINT_32_MAX + >> 3) /* 8-byte RGBA pixels */ + - 48 /* bigrowbuf hack */ + - 1 /* filter byte */ + - 7*8 /* rounding of width to multiple of 8 pixels */ + - 8) /* extra max_pixel_depth pad */ + png_warning(png_ptr, "Width is too large for libpng to process pixels"); + + /* Check other values */ + if (bit_depth != 1 && bit_depth != 2 && bit_depth != 4 && + bit_depth != 8 && bit_depth != 16) + { + png_warning(png_ptr, "Invalid bit depth in IHDR"); + error = 1; + } + + if (color_type < 0 || color_type == 1 || + color_type == 5 || color_type > 6) + { + png_warning(png_ptr, "Invalid color type in IHDR"); + error = 1; + } + + if (((color_type == PNG_COLOR_TYPE_PALETTE) && bit_depth > 8) || + ((color_type == PNG_COLOR_TYPE_RGB || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA || + color_type == PNG_COLOR_TYPE_RGB_ALPHA) && bit_depth < 8)) + { + png_warning(png_ptr, "Invalid color type/bit depth combination in IHDR"); + error = 1; + } + + if (interlace_type >= PNG_INTERLACE_LAST) + { + png_warning(png_ptr, "Unknown interlace method in IHDR"); + error = 1; + } + + if (compression_type != PNG_COMPRESSION_TYPE_BASE) + { + png_warning(png_ptr, "Unknown compression method in IHDR"); + error = 1; + } + +# ifdef PNG_MNG_FEATURES_SUPPORTED + /* Accept filter_method 64 (intrapixel differencing) only if + * 1. Libpng was compiled with PNG_MNG_FEATURES_SUPPORTED and + * 2. Libpng did not read a PNG signature (this filter_method is only + * used in PNG datastreams that are embedded in MNG datastreams) and + * 3. The application called png_permit_mng_features with a mask that + * included PNG_FLAG_MNG_FILTER_64 and + * 4. The filter_method is 64 and + * 5. The color_type is RGB or RGBA + */ + if ((png_ptr->mode & PNG_HAVE_PNG_SIGNATURE) && + png_ptr->mng_features_permitted) + png_warning(png_ptr, "MNG features are not allowed in a PNG datastream"); + + if (filter_type != PNG_FILTER_TYPE_BASE) + { + if (!((png_ptr->mng_features_permitted & PNG_FLAG_MNG_FILTER_64) && + (filter_type == PNG_INTRAPIXEL_DIFFERENCING) && + ((png_ptr->mode & PNG_HAVE_PNG_SIGNATURE) == 0) && + (color_type == PNG_COLOR_TYPE_RGB || + color_type == PNG_COLOR_TYPE_RGB_ALPHA))) + { + png_warning(png_ptr, "Unknown filter method in IHDR"); + error = 1; + } + + if (png_ptr->mode & PNG_HAVE_PNG_SIGNATURE) + { + png_warning(png_ptr, "Invalid filter method in IHDR"); + error = 1; + } + } + +# else + if (filter_type != PNG_FILTER_TYPE_BASE) + { + png_warning(png_ptr, "Unknown filter method in IHDR"); + error = 1; + } +# endif + + if (error == 1) + png_error(png_ptr, "Invalid IHDR data"); +} + +#if defined(PNG_sCAL_SUPPORTED) || defined(PNG_pCAL_SUPPORTED) +/* ASCII to fp functions */ +/* Check an ASCII formated floating point value, see the more detailed + * comments in pngpriv.h + */ +/* The following is used internally to preserve the sticky flags */ +#define png_fp_add(state, flags) ((state) |= (flags)) +#define png_fp_set(state, value) ((state) = (value) | ((state) & PNG_FP_STICKY)) + +int /* PRIVATE */ +png_check_fp_number(png_const_charp string, png_size_t size, int *statep, + png_size_tp whereami) +{ + int state = *statep; + png_size_t i = *whereami; + + while (i < size) + { + int type; + /* First find the type of the next character */ + switch (string[i]) + { + case 43: type = PNG_FP_SAW_SIGN; break; + case 45: type = PNG_FP_SAW_SIGN + PNG_FP_NEGATIVE; break; + case 46: type = PNG_FP_SAW_DOT; break; + case 48: type = PNG_FP_SAW_DIGIT; break; + case 49: case 50: case 51: case 52: + case 53: case 54: case 55: case 56: + case 57: type = PNG_FP_SAW_DIGIT + PNG_FP_NONZERO; break; + case 69: + case 101: type = PNG_FP_SAW_E; break; + default: goto PNG_FP_End; + } + + /* Now deal with this type according to the current + * state, the type is arranged to not overlap the + * bits of the PNG_FP_STATE. + */ + switch ((state & PNG_FP_STATE) + (type & PNG_FP_SAW_ANY)) + { + case PNG_FP_INTEGER + PNG_FP_SAW_SIGN: + if (state & PNG_FP_SAW_ANY) + goto PNG_FP_End; /* not a part of the number */ + + png_fp_add(state, type); + break; + + case PNG_FP_INTEGER + PNG_FP_SAW_DOT: + /* Ok as trailer, ok as lead of fraction. */ + if (state & PNG_FP_SAW_DOT) /* two dots */ + goto PNG_FP_End; + + else if (state & PNG_FP_SAW_DIGIT) /* trailing dot? */ + png_fp_add(state, type); + + else + png_fp_set(state, PNG_FP_FRACTION | type); + + break; + + case PNG_FP_INTEGER + PNG_FP_SAW_DIGIT: + if (state & PNG_FP_SAW_DOT) /* delayed fraction */ + png_fp_set(state, PNG_FP_FRACTION | PNG_FP_SAW_DOT); + + png_fp_add(state, type | PNG_FP_WAS_VALID); + + break; + + case PNG_FP_INTEGER + PNG_FP_SAW_E: + if ((state & PNG_FP_SAW_DIGIT) == 0) + goto PNG_FP_End; + + png_fp_set(state, PNG_FP_EXPONENT); + + break; + + /* case PNG_FP_FRACTION + PNG_FP_SAW_SIGN: + goto PNG_FP_End; ** no sign in fraction */ + + /* case PNG_FP_FRACTION + PNG_FP_SAW_DOT: + goto PNG_FP_End; ** Because SAW_DOT is always set */ + + case PNG_FP_FRACTION + PNG_FP_SAW_DIGIT: + png_fp_add(state, type | PNG_FP_WAS_VALID); + break; + + case PNG_FP_FRACTION + PNG_FP_SAW_E: + /* This is correct because the trailing '.' on an + * integer is handled above - so we can only get here + * with the sequence ".E" (with no preceding digits). + */ + if ((state & PNG_FP_SAW_DIGIT) == 0) + goto PNG_FP_End; + + png_fp_set(state, PNG_FP_EXPONENT); + + break; + + case PNG_FP_EXPONENT + PNG_FP_SAW_SIGN: + if (state & PNG_FP_SAW_ANY) + goto PNG_FP_End; /* not a part of the number */ + + png_fp_add(state, PNG_FP_SAW_SIGN); + + break; + + /* case PNG_FP_EXPONENT + PNG_FP_SAW_DOT: + goto PNG_FP_End; */ + + case PNG_FP_EXPONENT + PNG_FP_SAW_DIGIT: + png_fp_add(state, PNG_FP_SAW_DIGIT | PNG_FP_WAS_VALID); + + break; + + /* case PNG_FP_EXPONEXT + PNG_FP_SAW_E: + goto PNG_FP_End; */ + + default: goto PNG_FP_End; /* I.e. break 2 */ + } + + /* The character seems ok, continue. */ + ++i; + } + +PNG_FP_End: + /* Here at the end, update the state and return the correct + * return code. + */ + *statep = state; + *whereami = i; + + return (state & PNG_FP_SAW_DIGIT) != 0; +} + + +/* The same but for a complete string. */ +int +png_check_fp_string(png_const_charp string, png_size_t size) +{ + int state=0; + png_size_t char_index=0; + + if (png_check_fp_number(string, size, &state, &char_index) && + (char_index == size || string[char_index] == 0)) + return state /* must be non-zero - see above */; + + return 0; /* i.e. fail */ +} +#endif /* pCAL or sCAL */ + +#ifdef PNG_sCAL_SUPPORTED +# ifdef PNG_FLOATING_POINT_SUPPORTED +/* Utility used below - a simple accurate power of ten from an integral + * exponent. + */ +static double +png_pow10(int power) +{ + int recip = 0; + double d = 1; + + /* Handle negative exponent with a reciprocal at the end because + * 10 is exact whereas .1 is inexact in base 2 + */ + if (power < 0) + { + if (power < DBL_MIN_10_EXP) return 0; + recip = 1, power = -power; + } + + if (power > 0) + { + /* Decompose power bitwise. */ + double mult = 10; + do + { + if (power & 1) d *= mult; + mult *= mult; + power >>= 1; + } + while (power > 0); + + if (recip) d = 1/d; + } + /* else power is 0 and d is 1 */ + + return d; +} + +/* Function to format a floating point value in ASCII with a given + * precision. + */ +void /* PRIVATE */ +png_ascii_from_fp(png_const_structrp png_ptr, png_charp ascii, png_size_t size, + double fp, unsigned int precision) +{ + /* We use standard functions from math.h, but not printf because + * that would require stdio. The caller must supply a buffer of + * sufficient size or we will png_error. The tests on size and + * the space in ascii[] consumed are indicated below. + */ + if (precision < 1) + precision = DBL_DIG; + + /* Enforce the limit of the implementation precision too. */ + if (precision > DBL_DIG+1) + precision = DBL_DIG+1; + + /* Basic sanity checks */ + if (size >= precision+5) /* See the requirements below. */ + { + if (fp < 0) + { + fp = -fp; + *ascii++ = 45; /* '-' PLUS 1 TOTAL 1 */ + --size; + } + + if (fp >= DBL_MIN && fp <= DBL_MAX) + { + int exp_b10; /* A base 10 exponent */ + double base; /* 10^exp_b10 */ + + /* First extract a base 10 exponent of the number, + * the calculation below rounds down when converting + * from base 2 to base 10 (multiply by log10(2) - + * 0.3010, but 77/256 is 0.3008, so exp_b10 needs to + * be increased. Note that the arithmetic shift + * performs a floor() unlike C arithmetic - using a + * C multiply would break the following for negative + * exponents. + */ + (void)frexp(fp, &exp_b10); /* exponent to base 2 */ + + exp_b10 = (exp_b10 * 77) >> 8; /* <= exponent to base 10 */ + + /* Avoid underflow here. */ + base = png_pow10(exp_b10); /* May underflow */ + + while (base < DBL_MIN || base < fp) + { + /* And this may overflow. */ + double test = png_pow10(exp_b10+1); + + if (test <= DBL_MAX) + ++exp_b10, base = test; + + else + break; + } + + /* Normalize fp and correct exp_b10, after this fp is in the + * range [.1,1) and exp_b10 is both the exponent and the digit + * *before* which the decimal point should be inserted + * (starting with 0 for the first digit). Note that this + * works even if 10^exp_b10 is out of range because of the + * test on DBL_MAX above. + */ + fp /= base; + while (fp >= 1) fp /= 10, ++exp_b10; + + /* Because of the code above fp may, at this point, be + * less than .1, this is ok because the code below can + * handle the leading zeros this generates, so no attempt + * is made to correct that here. + */ + + { + int czero, clead, cdigits; + char exponent[10]; + + /* Allow up to two leading zeros - this will not lengthen + * the number compared to using E-n. + */ + if (exp_b10 < 0 && exp_b10 > -3) /* PLUS 3 TOTAL 4 */ + { + czero = -exp_b10; /* PLUS 2 digits: TOTAL 3 */ + exp_b10 = 0; /* Dot added below before first output. */ + } + else + czero = 0; /* No zeros to add */ + + /* Generate the digit list, stripping trailing zeros and + * inserting a '.' before a digit if the exponent is 0. + */ + clead = czero; /* Count of leading zeros */ + cdigits = 0; /* Count of digits in list. */ + + do + { + double d; + + fp *= 10; + /* Use modf here, not floor and subtract, so that + * the separation is done in one step. At the end + * of the loop don't break the number into parts so + * that the final digit is rounded. + */ + if (cdigits+czero-clead+1 < (int)precision) + fp = modf(fp, &d); + + else + { + d = floor(fp + .5); + + if (d > 9) + { + /* Rounding up to 10, handle that here. */ + if (czero > 0) + { + --czero, d = 1; + if (cdigits == 0) --clead; + } + else + { + while (cdigits > 0 && d > 9) + { + int ch = *--ascii; + + if (exp_b10 != (-1)) + ++exp_b10; + + else if (ch == 46) + { + ch = *--ascii, ++size; + /* Advance exp_b10 to '1', so that the + * decimal point happens after the + * previous digit. + */ + exp_b10 = 1; + } + + --cdigits; + d = ch - 47; /* I.e. 1+(ch-48) */ + } + + /* Did we reach the beginning? If so adjust the + * exponent but take into account the leading + * decimal point. + */ + if (d > 9) /* cdigits == 0 */ + { + if (exp_b10 == (-1)) + { + /* Leading decimal point (plus zeros?), if + * we lose the decimal point here it must + * be reentered below. + */ + int ch = *--ascii; + + if (ch == 46) + ++size, exp_b10 = 1; + + /* Else lost a leading zero, so 'exp_b10' is + * still ok at (-1) + */ + } + else + ++exp_b10; + + /* In all cases we output a '1' */ + d = 1; + } + } + } + fp = 0; /* Guarantees termination below. */ + } + + if (d == 0) + { + ++czero; + if (cdigits == 0) ++clead; + } + else + { + /* Included embedded zeros in the digit count. */ + cdigits += czero - clead; + clead = 0; + + while (czero > 0) + { + /* exp_b10 == (-1) means we just output the decimal + * place - after the DP don't adjust 'exp_b10' any + * more! + */ + if (exp_b10 != (-1)) + { + if (exp_b10 == 0) *ascii++ = 46, --size; + /* PLUS 1: TOTAL 4 */ + --exp_b10; + } + *ascii++ = 48, --czero; + } + + if (exp_b10 != (-1)) + { + if (exp_b10 == 0) *ascii++ = 46, --size; /* counted + above */ + --exp_b10; + } + *ascii++ = (char)(48 + (int)d), ++cdigits; + } + } + while (cdigits+czero-clead < (int)precision && fp > DBL_MIN); + + /* The total output count (max) is now 4+precision */ + + /* Check for an exponent, if we don't need one we are + * done and just need to terminate the string. At + * this point exp_b10==(-1) is effectively if flag - it got + * to '-1' because of the decrement after outputing + * the decimal point above (the exponent required is + * *not* -1!) + */ + if (exp_b10 >= (-1) && exp_b10 <= 2) + { + /* The following only happens if we didn't output the + * leading zeros above for negative exponent, so this + * doest add to the digit requirement. Note that the + * two zeros here can only be output if the two leading + * zeros were *not* output, so this doesn't increase + * the output count. + */ + while (--exp_b10 >= 0) *ascii++ = 48; + + *ascii = 0; + + /* Total buffer requirement (including the '\0') is + * 5+precision - see check at the start. + */ + return; + } + + /* Here if an exponent is required, adjust size for + * the digits we output but did not count. The total + * digit output here so far is at most 1+precision - no + * decimal point and no leading or trailing zeros have + * been output. + */ + size -= cdigits; + + *ascii++ = 69, --size; /* 'E': PLUS 1 TOTAL 2+precision */ + + /* The following use of an unsigned temporary avoids ambiguities in + * the signed arithmetic on exp_b10 and permits GCC at least to do + * better optimization. + */ + { + unsigned int uexp_b10; + + if (exp_b10 < 0) + { + *ascii++ = 45, --size; /* '-': PLUS 1 TOTAL 3+precision */ + uexp_b10 = -exp_b10; + } + + else + uexp_b10 = exp_b10; + + cdigits = 0; + + while (uexp_b10 > 0) + { + exponent[cdigits++] = (char)(48 + uexp_b10 % 10); + uexp_b10 /= 10; + } + } + + /* Need another size check here for the exponent digits, so + * this need not be considered above. + */ + if ((int)size > cdigits) + { + while (cdigits > 0) *ascii++ = exponent[--cdigits]; + + *ascii = 0; + + return; + } + } + } + else if (!(fp >= DBL_MIN)) + { + *ascii++ = 48; /* '0' */ + *ascii = 0; + return; + } + else + { + *ascii++ = 105; /* 'i' */ + *ascii++ = 110; /* 'n' */ + *ascii++ = 102; /* 'f' */ + *ascii = 0; + return; + } + } + + /* Here on buffer too small. */ + png_error(png_ptr, "ASCII conversion buffer too small"); +} + +# endif /* FLOATING_POINT */ + +# ifdef PNG_FIXED_POINT_SUPPORTED +/* Function to format a fixed point value in ASCII. + */ +void /* PRIVATE */ +png_ascii_from_fixed(png_const_structrp png_ptr, png_charp ascii, + png_size_t size, png_fixed_point fp) +{ + /* Require space for 10 decimal digits, a decimal point, a minus sign and a + * trailing \0, 13 characters: + */ + if (size > 12) + { + png_uint_32 num; + + /* Avoid overflow here on the minimum integer. */ + if (fp < 0) + *ascii++ = 45, --size, num = -fp; + else + num = fp; + + if (num <= 0x80000000) /* else overflowed */ + { + unsigned int ndigits = 0, first = 16 /* flag value */; + char digits[10]; + + while (num) + { + /* Split the low digit off num: */ + unsigned int tmp = num/10; + num -= tmp*10; + digits[ndigits++] = (char)(48 + num); + /* Record the first non-zero digit, note that this is a number + * starting at 1, it's not actually the array index. + */ + if (first == 16 && num > 0) + first = ndigits; + num = tmp; + } + + if (ndigits > 0) + { + while (ndigits > 5) *ascii++ = digits[--ndigits]; + /* The remaining digits are fractional digits, ndigits is '5' or + * smaller at this point. It is certainly not zero. Check for a + * non-zero fractional digit: + */ + if (first <= 5) + { + unsigned int i; + *ascii++ = 46; /* decimal point */ + /* ndigits may be <5 for small numbers, output leading zeros + * then ndigits digits to first: + */ + i = 5; + while (ndigits < i) *ascii++ = 48, --i; + while (ndigits >= first) *ascii++ = digits[--ndigits]; + /* Don't output the trailing zeros! */ + } + } + else + *ascii++ = 48; + + /* And null terminate the string: */ + *ascii = 0; + return; + } + } + + /* Here on buffer too small. */ + png_error(png_ptr, "ASCII conversion buffer too small"); +} +# endif /* FIXED_POINT */ +#endif /* READ_SCAL */ + +#if defined(PNG_FLOATING_POINT_SUPPORTED) && \ + !defined(PNG_FIXED_POINT_MACRO_SUPPORTED) && \ + (defined(PNG_gAMA_SUPPORTED) || defined(PNG_cHRM_SUPPORTED) || \ + defined(PNG_sCAL_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) || \ + defined(PNG_READ_RGB_TO_GRAY_SUPPORTED)) || \ + (defined(PNG_sCAL_SUPPORTED) && \ + defined(PNG_FLOATING_ARITHMETIC_SUPPORTED)) +png_fixed_point +png_fixed(png_const_structrp png_ptr, double fp, png_const_charp text) +{ + double r = floor(100000 * fp + .5); + + if (r > 2147483647. || r < -2147483648.) + png_fixed_error(png_ptr, text); + + return (png_fixed_point)r; +} +#endif + +#if defined(PNG_READ_GAMMA_SUPPORTED) || \ + defined(PNG_INCH_CONVERSIONS_SUPPORTED) || defined(PNG_READ_pHYs_SUPPORTED) +/* muldiv functions */ +/* This API takes signed arguments and rounds the result to the nearest + * integer (or, for a fixed point number - the standard argument - to + * the nearest .00001). Overflow and divide by zero are signalled in + * the result, a boolean - true on success, false on overflow. + */ +int +png_muldiv(png_fixed_point_p res, png_fixed_point a, png_int_32 times, + png_int_32 divisor) +{ + /* Return a * times / divisor, rounded. */ + if (divisor != 0) + { + if (a == 0 || times == 0) + { + *res = 0; + return 1; + } + else + { +#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED + double r = a; + r *= times; + r /= divisor; + r = floor(r+.5); + + /* A png_fixed_point is a 32-bit integer. */ + if (r <= 2147483647. && r >= -2147483648.) + { + *res = (png_fixed_point)r; + return 1; + } +#else + int negative = 0; + png_uint_32 A, T, D; + png_uint_32 s16, s32, s00; + + if (a < 0) + negative = 1, A = -a; + else + A = a; + + if (times < 0) + negative = !negative, T = -times; + else + T = times; + + if (divisor < 0) + negative = !negative, D = -divisor; + else + D = divisor; + + /* Following can't overflow because the arguments only + * have 31 bits each, however the result may be 32 bits. + */ + s16 = (A >> 16) * (T & 0xffff) + + (A & 0xffff) * (T >> 16); + /* Can't overflow because the a*times bit is only 30 + * bits at most. + */ + s32 = (A >> 16) * (T >> 16) + (s16 >> 16); + s00 = (A & 0xffff) * (T & 0xffff); + + s16 = (s16 & 0xffff) << 16; + s00 += s16; + + if (s00 < s16) + ++s32; /* carry */ + + if (s32 < D) /* else overflow */ + { + /* s32.s00 is now the 64-bit product, do a standard + * division, we know that s32 < D, so the maximum + * required shift is 31. + */ + int bitshift = 32; + png_fixed_point result = 0; /* NOTE: signed */ + + while (--bitshift >= 0) + { + png_uint_32 d32, d00; + + if (bitshift > 0) + d32 = D >> (32-bitshift), d00 = D << bitshift; + + else + d32 = 0, d00 = D; + + if (s32 > d32) + { + if (s00 < d00) --s32; /* carry */ + s32 -= d32, s00 -= d00, result += 1<= d00) + s32 = 0, s00 -= d00, result += 1<= (D >> 1)) + ++result; + + if (negative) + result = -result; + + /* Check for overflow. */ + if ((negative && result <= 0) || (!negative && result >= 0)) + { + *res = result; + return 1; + } + } +#endif + } + } + + return 0; +} +#endif /* READ_GAMMA || INCH_CONVERSIONS */ + +#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_INCH_CONVERSIONS_SUPPORTED) +/* The following is for when the caller doesn't much care about the + * result. + */ +png_fixed_point +png_muldiv_warn(png_const_structrp png_ptr, png_fixed_point a, png_int_32 times, + png_int_32 divisor) +{ + png_fixed_point result; + + if (png_muldiv(&result, a, times, divisor)) + return result; + + png_warning(png_ptr, "fixed point overflow ignored"); + return 0; +} +#endif + +#ifdef PNG_GAMMA_SUPPORTED /* more fixed point functions for gamma */ +/* Calculate a reciprocal, return 0 on div-by-zero or overflow. */ +png_fixed_point +png_reciprocal(png_fixed_point a) +{ +#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED + double r = floor(1E10/a+.5); + + if (r <= 2147483647. && r >= -2147483648.) + return (png_fixed_point)r; +#else + png_fixed_point res; + + if (png_muldiv(&res, 100000, 100000, a)) + return res; +#endif + + return 0; /* error/overflow */ +} + +/* This is the shared test on whether a gamma value is 'significant' - whether + * it is worth doing gamma correction. + */ +int /* PRIVATE */ +png_gamma_significant(png_fixed_point gamma_val) +{ + return gamma_val < PNG_FP_1 - PNG_GAMMA_THRESHOLD_FIXED || + gamma_val > PNG_FP_1 + PNG_GAMMA_THRESHOLD_FIXED; +} +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* A local convenience routine. */ +static png_fixed_point +png_product2(png_fixed_point a, png_fixed_point b) +{ + /* The required result is 1/a * 1/b; the following preserves accuracy. */ +#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED + double r = a * 1E-5; + r *= b; + r = floor(r+.5); + + if (r <= 2147483647. && r >= -2147483648.) + return (png_fixed_point)r; +#else + png_fixed_point res; + + if (png_muldiv(&res, a, b, 100000)) + return res; +#endif + + return 0; /* overflow */ +} + +/* The inverse of the above. */ +png_fixed_point +png_reciprocal2(png_fixed_point a, png_fixed_point b) +{ + /* The required result is 1/a * 1/b; the following preserves accuracy. */ +#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED + double r = 1E15/a; + r /= b; + r = floor(r+.5); + + if (r <= 2147483647. && r >= -2147483648.) + return (png_fixed_point)r; +#else + /* This may overflow because the range of png_fixed_point isn't symmetric, + * but this API is only used for the product of file and screen gamma so it + * doesn't matter that the smallest number it can produce is 1/21474, not + * 1/100000 + */ + png_fixed_point res = png_product2(a, b); + + if (res != 0) + return png_reciprocal(res); +#endif + + return 0; /* overflow */ +} +#endif /* READ_GAMMA */ + +#ifdef PNG_READ_GAMMA_SUPPORTED /* gamma table code */ +#ifndef PNG_FLOATING_ARITHMETIC_SUPPORTED +/* Fixed point gamma. + * + * The code to calculate the tables used below can be found in the shell script + * contrib/tools/intgamma.sh + * + * To calculate gamma this code implements fast log() and exp() calls using only + * fixed point arithmetic. This code has sufficient precision for either 8-bit + * or 16-bit sample values. + * + * The tables used here were calculated using simple 'bc' programs, but C double + * precision floating point arithmetic would work fine. + * + * 8-bit log table + * This is a table of -log(value/255)/log(2) for 'value' in the range 128 to + * 255, so it's the base 2 logarithm of a normalized 8-bit floating point + * mantissa. The numbers are 32-bit fractions. + */ +static const png_uint_32 +png_8bit_l2[128] = +{ + 4270715492U, 4222494797U, 4174646467U, 4127164793U, 4080044201U, 4033279239U, + 3986864580U, 3940795015U, 3895065449U, 3849670902U, 3804606499U, 3759867474U, + 3715449162U, 3671346997U, 3627556511U, 3584073329U, 3540893168U, 3498011834U, + 3455425220U, 3413129301U, 3371120137U, 3329393864U, 3287946700U, 3246774933U, + 3205874930U, 3165243125U, 3124876025U, 3084770202U, 3044922296U, 3005329011U, + 2965987113U, 2926893432U, 2888044853U, 2849438323U, 2811070844U, 2772939474U, + 2735041326U, 2697373562U, 2659933400U, 2622718104U, 2585724991U, 2548951424U, + 2512394810U, 2476052606U, 2439922311U, 2404001468U, 2368287663U, 2332778523U, + 2297471715U, 2262364947U, 2227455964U, 2192742551U, 2158222529U, 2123893754U, + 2089754119U, 2055801552U, 2022034013U, 1988449497U, 1955046031U, 1921821672U, + 1888774511U, 1855902668U, 1823204291U, 1790677560U, 1758320682U, 1726131893U, + 1694109454U, 1662251657U, 1630556815U, 1599023271U, 1567649391U, 1536433567U, + 1505374214U, 1474469770U, 1443718700U, 1413119487U, 1382670639U, 1352370686U, + 1322218179U, 1292211689U, 1262349810U, 1232631153U, 1203054352U, 1173618059U, + 1144320946U, 1115161701U, 1086139034U, 1057251672U, 1028498358U, 999877854U, + 971388940U, 943030410U, 914801076U, 886699767U, 858725327U, 830876614U, + 803152505U, 775551890U, 748073672U, 720716771U, 693480120U, 666362667U, + 639363374U, 612481215U, 585715177U, 559064263U, 532527486U, 506103872U, + 479792461U, 453592303U, 427502463U, 401522014U, 375650043U, 349885648U, + 324227938U, 298676034U, 273229066U, 247886176U, 222646516U, 197509248U, + 172473545U, 147538590U, 122703574U, 97967701U, 73330182U, 48790236U, + 24347096U, 0U + +#if 0 + /* The following are the values for 16-bit tables - these work fine for the + * 8-bit conversions but produce very slightly larger errors in the 16-bit + * log (about 1.2 as opposed to 0.7 absolute error in the final value). To + * use these all the shifts below must be adjusted appropriately. + */ + 65166, 64430, 63700, 62976, 62257, 61543, 60835, 60132, 59434, 58741, 58054, + 57371, 56693, 56020, 55352, 54689, 54030, 53375, 52726, 52080, 51439, 50803, + 50170, 49542, 48918, 48298, 47682, 47070, 46462, 45858, 45257, 44661, 44068, + 43479, 42894, 42312, 41733, 41159, 40587, 40020, 39455, 38894, 38336, 37782, + 37230, 36682, 36137, 35595, 35057, 34521, 33988, 33459, 32932, 32408, 31887, + 31369, 30854, 30341, 29832, 29325, 28820, 28319, 27820, 27324, 26830, 26339, + 25850, 25364, 24880, 24399, 23920, 23444, 22970, 22499, 22029, 21562, 21098, + 20636, 20175, 19718, 19262, 18808, 18357, 17908, 17461, 17016, 16573, 16132, + 15694, 15257, 14822, 14390, 13959, 13530, 13103, 12678, 12255, 11834, 11415, + 10997, 10582, 10168, 9756, 9346, 8937, 8531, 8126, 7723, 7321, 6921, 6523, + 6127, 5732, 5339, 4947, 4557, 4169, 3782, 3397, 3014, 2632, 2251, 1872, 1495, + 1119, 744, 372 +#endif +}; + +static png_int_32 +png_log8bit(unsigned int x) +{ + unsigned int lg2 = 0; + /* Each time 'x' is multiplied by 2, 1 must be subtracted off the final log, + * because the log is actually negate that means adding 1. The final + * returned value thus has the range 0 (for 255 input) to 7.994 (for 1 + * input), return -1 for the overflow (log 0) case, - so the result is + * always at most 19 bits. + */ + if ((x &= 0xff) == 0) + return -1; + + if ((x & 0xf0) == 0) + lg2 = 4, x <<= 4; + + if ((x & 0xc0) == 0) + lg2 += 2, x <<= 2; + + if ((x & 0x80) == 0) + lg2 += 1, x <<= 1; + + /* result is at most 19 bits, so this cast is safe: */ + return (png_int_32)((lg2 << 16) + ((png_8bit_l2[x-128]+32768)>>16)); +} + +/* The above gives exact (to 16 binary places) log2 values for 8-bit images, + * for 16-bit images we use the most significant 8 bits of the 16-bit value to + * get an approximation then multiply the approximation by a correction factor + * determined by the remaining up to 8 bits. This requires an additional step + * in the 16-bit case. + * + * We want log2(value/65535), we have log2(v'/255), where: + * + * value = v' * 256 + v'' + * = v' * f + * + * So f is value/v', which is equal to (256+v''/v') since v' is in the range 128 + * to 255 and v'' is in the range 0 to 255 f will be in the range 256 to less + * than 258. The final factor also needs to correct for the fact that our 8-bit + * value is scaled by 255, whereas the 16-bit values must be scaled by 65535. + * + * This gives a final formula using a calculated value 'x' which is value/v' and + * scaling by 65536 to match the above table: + * + * log2(x/257) * 65536 + * + * Since these numbers are so close to '1' we can use simple linear + * interpolation between the two end values 256/257 (result -368.61) and 258/257 + * (result 367.179). The values used below are scaled by a further 64 to give + * 16-bit precision in the interpolation: + * + * Start (256): -23591 + * Zero (257): 0 + * End (258): 23499 + */ +static png_int_32 +png_log16bit(png_uint_32 x) +{ + unsigned int lg2 = 0; + + /* As above, but now the input has 16 bits. */ + if ((x &= 0xffff) == 0) + return -1; + + if ((x & 0xff00) == 0) + lg2 = 8, x <<= 8; + + if ((x & 0xf000) == 0) + lg2 += 4, x <<= 4; + + if ((x & 0xc000) == 0) + lg2 += 2, x <<= 2; + + if ((x & 0x8000) == 0) + lg2 += 1, x <<= 1; + + /* Calculate the base logarithm from the top 8 bits as a 28-bit fractional + * value. + */ + lg2 <<= 28; + lg2 += (png_8bit_l2[(x>>8)-128]+8) >> 4; + + /* Now we need to interpolate the factor, this requires a division by the top + * 8 bits. Do this with maximum precision. + */ + x = ((x << 16) + (x >> 9)) / (x >> 8); + + /* Since we divided by the top 8 bits of 'x' there will be a '1' at 1<<24, + * the value at 1<<16 (ignoring this) will be 0 or 1; this gives us exactly + * 16 bits to interpolate to get the low bits of the result. Round the + * answer. Note that the end point values are scaled by 64 to retain overall + * precision and that 'lg2' is current scaled by an extra 12 bits, so adjust + * the overall scaling by 6-12. Round at every step. + */ + x -= 1U << 24; + + if (x <= 65536U) /* <= '257' */ + lg2 += ((23591U * (65536U-x)) + (1U << (16+6-12-1))) >> (16+6-12); + + else + lg2 -= ((23499U * (x-65536U)) + (1U << (16+6-12-1))) >> (16+6-12); + + /* Safe, because the result can't have more than 20 bits: */ + return (png_int_32)((lg2 + 2048) >> 12); +} + +/* The 'exp()' case must invert the above, taking a 20-bit fixed point + * logarithmic value and returning a 16 or 8-bit number as appropriate. In + * each case only the low 16 bits are relevant - the fraction - since the + * integer bits (the top 4) simply determine a shift. + * + * The worst case is the 16-bit distinction between 65535 and 65534, this + * requires perhaps spurious accuracty in the decoding of the logarithm to + * distinguish log2(65535/65534.5) - 10^-5 or 17 bits. There is little chance + * of getting this accuracy in practice. + * + * To deal with this the following exp() function works out the exponent of the + * frational part of the logarithm by using an accurate 32-bit value from the + * top four fractional bits then multiplying in the remaining bits. + */ +static const png_uint_32 +png_32bit_exp[16] = +{ + /* NOTE: the first entry is deliberately set to the maximum 32-bit value. */ + 4294967295U, 4112874773U, 3938502376U, 3771522796U, 3611622603U, 3458501653U, + 3311872529U, 3171459999U, 3037000500U, 2908241642U, 2784941738U, 2666869345U, + 2553802834U, 2445529972U, 2341847524U, 2242560872U +}; + +/* Adjustment table; provided to explain the numbers in the code below. */ +#if 0 +for (i=11;i>=0;--i){ print i, " ", (1 - e(-(2^i)/65536*l(2))) * 2^(32-i), "\n"} + 11 44937.64284865548751208448 + 10 45180.98734845585101160448 + 9 45303.31936980687359311872 + 8 45364.65110595323018870784 + 7 45395.35850361789624614912 + 6 45410.72259715102037508096 + 5 45418.40724413220722311168 + 4 45422.25021786898173001728 + 3 45424.17186732298419044352 + 2 45425.13273269940811464704 + 1 45425.61317555035558641664 + 0 45425.85339951654943850496 +#endif + +static png_uint_32 +png_exp(png_fixed_point x) +{ + if (x > 0 && x <= 0xfffff) /* Else overflow or zero (underflow) */ + { + /* Obtain a 4-bit approximation */ + png_uint_32 e = png_32bit_exp[(x >> 12) & 0xf]; + + /* Incorporate the low 12 bits - these decrease the returned value by + * multiplying by a number less than 1 if the bit is set. The multiplier + * is determined by the above table and the shift. Notice that the values + * converge on 45426 and this is used to allow linear interpolation of the + * low bits. + */ + if (x & 0x800) + e -= (((e >> 16) * 44938U) + 16U) >> 5; + + if (x & 0x400) + e -= (((e >> 16) * 45181U) + 32U) >> 6; + + if (x & 0x200) + e -= (((e >> 16) * 45303U) + 64U) >> 7; + + if (x & 0x100) + e -= (((e >> 16) * 45365U) + 128U) >> 8; + + if (x & 0x080) + e -= (((e >> 16) * 45395U) + 256U) >> 9; + + if (x & 0x040) + e -= (((e >> 16) * 45410U) + 512U) >> 10; + + /* And handle the low 6 bits in a single block. */ + e -= (((e >> 16) * 355U * (x & 0x3fU)) + 256U) >> 9; + + /* Handle the upper bits of x. */ + e >>= x >> 16; + return e; + } + + /* Check for overflow */ + if (x <= 0) + return png_32bit_exp[0]; + + /* Else underflow */ + return 0; +} + +static png_byte +png_exp8bit(png_fixed_point lg2) +{ + /* Get a 32-bit value: */ + png_uint_32 x = png_exp(lg2); + + /* Convert the 32-bit value to 0..255 by multiplying by 256-1, note that the + * second, rounding, step can't overflow because of the first, subtraction, + * step. + */ + x -= x >> 8; + return (png_byte)((x + 0x7fffffU) >> 24); +} + +static png_uint_16 +png_exp16bit(png_fixed_point lg2) +{ + /* Get a 32-bit value: */ + png_uint_32 x = png_exp(lg2); + + /* Convert the 32-bit value to 0..65535 by multiplying by 65536-1: */ + x -= x >> 16; + return (png_uint_16)((x + 32767U) >> 16); +} +#endif /* FLOATING_ARITHMETIC */ + +png_byte +png_gamma_8bit_correct(unsigned int value, png_fixed_point gamma_val) +{ + if (value > 0 && value < 255) + { +# ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED + double r = floor(255*pow(value/255.,gamma_val*.00001)+.5); + return (png_byte)r; +# else + png_int_32 lg2 = png_log8bit(value); + png_fixed_point res; + + if (png_muldiv(&res, gamma_val, lg2, PNG_FP_1)) + return png_exp8bit(res); + + /* Overflow. */ + value = 0; +# endif + } + + return (png_byte)value; +} + +png_uint_16 +png_gamma_16bit_correct(unsigned int value, png_fixed_point gamma_val) +{ + if (value > 0 && value < 65535) + { +# ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED + double r = floor(65535*pow(value/65535.,gamma_val*.00001)+.5); + return (png_uint_16)r; +# else + png_int_32 lg2 = png_log16bit(value); + png_fixed_point res; + + if (png_muldiv(&res, gamma_val, lg2, PNG_FP_1)) + return png_exp16bit(res); + + /* Overflow. */ + value = 0; +# endif + } + + return (png_uint_16)value; +} + +/* This does the right thing based on the bit_depth field of the + * png_struct, interpreting values as 8-bit or 16-bit. While the result + * is nominally a 16-bit value if bit depth is 8 then the result is + * 8-bit (as are the arguments.) + */ +png_uint_16 /* PRIVATE */ +png_gamma_correct(png_structrp png_ptr, unsigned int value, + png_fixed_point gamma_val) +{ + if (png_ptr->bit_depth == 8) + return png_gamma_8bit_correct(value, gamma_val); + + else + return png_gamma_16bit_correct(value, gamma_val); +} + +/* Internal function to build a single 16-bit table - the table consists of + * 'num' 256 entry subtables, where 'num' is determined by 'shift' - the amount + * to shift the input values right (or 16-number_of_signifiant_bits). + * + * The caller is responsible for ensuring that the table gets cleaned up on + * png_error (i.e. if one of the mallocs below fails) - i.e. the *table argument + * should be somewhere that will be cleaned. + */ +static void +png_build_16bit_table(png_structrp png_ptr, png_uint_16pp *ptable, + PNG_CONST unsigned int shift, PNG_CONST png_fixed_point gamma_val) +{ + /* Various values derived from 'shift': */ + PNG_CONST unsigned int num = 1U << (8U - shift); + PNG_CONST unsigned int max = (1U << (16U - shift))-1U; + PNG_CONST unsigned int max_by_2 = 1U << (15U-shift); + unsigned int i; + + png_uint_16pp table = *ptable = + (png_uint_16pp)png_calloc(png_ptr, num * (sizeof (png_uint_16p))); + + for (i = 0; i < num; i++) + { + png_uint_16p sub_table = table[i] = + (png_uint_16p)png_malloc(png_ptr, 256 * (sizeof (png_uint_16))); + + /* The 'threshold' test is repeated here because it can arise for one of + * the 16-bit tables even if the others don't hit it. + */ + if (png_gamma_significant(gamma_val)) + { + /* The old code would overflow at the end and this would cause the + * 'pow' function to return a result >1, resulting in an + * arithmetic error. This code follows the spec exactly; ig is + * the recovered input sample, it always has 8-16 bits. + * + * We want input * 65535/max, rounded, the arithmetic fits in 32 + * bits (unsigned) so long as max <= 32767. + */ + unsigned int j; + for (j = 0; j < 256; j++) + { + png_uint_32 ig = (j << (8-shift)) + i; +# ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED + /* Inline the 'max' scaling operation: */ + double d = floor(65535*pow(ig/(double)max, gamma_val*.00001)+.5); + sub_table[j] = (png_uint_16)d; +# else + if (shift) + ig = (ig * 65535U + max_by_2)/max; + + sub_table[j] = png_gamma_16bit_correct(ig, gamma_val); +# endif + } + } + else + { + /* We must still build a table, but do it the fast way. */ + unsigned int j; + + for (j = 0; j < 256; j++) + { + png_uint_32 ig = (j << (8-shift)) + i; + + if (shift) + ig = (ig * 65535U + max_by_2)/max; + + sub_table[j] = (png_uint_16)ig; + } + } + } +} + +/* NOTE: this function expects the *inverse* of the overall gamma transformation + * required. + */ +static void +png_build_16to8_table(png_structrp png_ptr, png_uint_16pp *ptable, + PNG_CONST unsigned int shift, PNG_CONST png_fixed_point gamma_val) +{ + PNG_CONST unsigned int num = 1U << (8U - shift); + PNG_CONST unsigned int max = (1U << (16U - shift))-1U; + unsigned int i; + png_uint_32 last; + + png_uint_16pp table = *ptable = + (png_uint_16pp)png_calloc(png_ptr, num * (sizeof (png_uint_16p))); + + /* 'num' is the number of tables and also the number of low bits of low + * bits of the input 16-bit value used to select a table. Each table is + * itself index by the high 8 bits of the value. + */ + for (i = 0; i < num; i++) + table[i] = (png_uint_16p)png_malloc(png_ptr, + 256 * (sizeof (png_uint_16))); + + /* 'gamma_val' is set to the reciprocal of the value calculated above, so + * pow(out,g) is an *input* value. 'last' is the last input value set. + * + * In the loop 'i' is used to find output values. Since the output is + * 8-bit there are only 256 possible values. The tables are set up to + * select the closest possible output value for each input by finding + * the input value at the boundary between each pair of output values + * and filling the table up to that boundary with the lower output + * value. + * + * The boundary values are 0.5,1.5..253.5,254.5. Since these are 9-bit + * values the code below uses a 16-bit value in i; the values start at + * 128.5 (for 0.5) and step by 257, for a total of 254 values (the last + * entries are filled with 255). Start i at 128 and fill all 'last' + * table entries <= 'max' + */ + last = 0; + for (i = 0; i < 255; ++i) /* 8-bit output value */ + { + /* Find the corresponding maximum input value */ + png_uint_16 out = (png_uint_16)(i * 257U); /* 16-bit output value */ + + /* Find the boundary value in 16 bits: */ + png_uint_32 bound = png_gamma_16bit_correct(out+128U, gamma_val); + + /* Adjust (round) to (16-shift) bits: */ + bound = (bound * max + 32768U)/65535U + 1U; + + while (last < bound) + { + table[last & (0xffU >> shift)][last >> (8U - shift)] = out; + last++; + } + } + + /* And fill in the final entries. */ + while (last < (num << 8)) + { + table[last & (0xff >> shift)][last >> (8U - shift)] = 65535U; + last++; + } +} + +/* Build a single 8-bit table: same as the 16-bit case but much simpler (and + * typically much faster). Note that libpng currently does no sBIT processing + * (apparently contrary to the spec) so a 256 entry table is always generated. + */ +static void +png_build_8bit_table(png_structrp png_ptr, png_bytepp ptable, + PNG_CONST png_fixed_point gamma_val) +{ + unsigned int i; + png_bytep table = *ptable = (png_bytep)png_malloc(png_ptr, 256); + + if (png_gamma_significant(gamma_val)) for (i=0; i<256; i++) + table[i] = png_gamma_8bit_correct(i, gamma_val); + + else for (i=0; i<256; ++i) + table[i] = (png_byte)i; +} + +/* Used from png_read_destroy and below to release the memory used by the gamma + * tables. + */ +void /* PRIVATE */ +png_destroy_gamma_table(png_structrp png_ptr) +{ + png_free(png_ptr, png_ptr->gamma_table); + png_ptr->gamma_table = NULL; + + if (png_ptr->gamma_16_table != NULL) + { + int i; + int istop = (1 << (8 - png_ptr->gamma_shift)); + for (i = 0; i < istop; i++) + { + png_free(png_ptr, png_ptr->gamma_16_table[i]); + } + png_free(png_ptr, png_ptr->gamma_16_table); + png_ptr->gamma_16_table = NULL; + } + +#if defined(PNG_READ_BACKGROUND_SUPPORTED) || \ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \ + defined(PNG_READ_RGB_TO_GRAY_SUPPORTED) + png_free(png_ptr, png_ptr->gamma_from_1); + png_ptr->gamma_from_1 = NULL; + png_free(png_ptr, png_ptr->gamma_to_1); + png_ptr->gamma_to_1 = NULL; + + if (png_ptr->gamma_16_from_1 != NULL) + { + int i; + int istop = (1 << (8 - png_ptr->gamma_shift)); + for (i = 0; i < istop; i++) + { + png_free(png_ptr, png_ptr->gamma_16_from_1[i]); + } + png_free(png_ptr, png_ptr->gamma_16_from_1); + png_ptr->gamma_16_from_1 = NULL; + } + if (png_ptr->gamma_16_to_1 != NULL) + { + int i; + int istop = (1 << (8 - png_ptr->gamma_shift)); + for (i = 0; i < istop; i++) + { + png_free(png_ptr, png_ptr->gamma_16_to_1[i]); + } + png_free(png_ptr, png_ptr->gamma_16_to_1); + png_ptr->gamma_16_to_1 = NULL; + } +#endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */ +} + +/* We build the 8- or 16-bit gamma tables here. Note that for 16-bit + * tables, we don't make a full table if we are reducing to 8-bit in + * the future. Note also how the gamma_16 tables are segmented so that + * we don't need to allocate > 64K chunks for a full 16-bit table. + */ +void /* PRIVATE */ +png_build_gamma_table(png_structrp png_ptr, int bit_depth) +{ + png_debug(1, "in png_build_gamma_table"); + + /* Remove any existing table; this copes with multiple calls to + * png_read_update_info. The warning is because building the gamma tables + * multiple times is a performance hit - it's harmless but the ability to call + * png_read_update_info() multiple times is new in 1.5.6 so it seems sensible + * to warn if the app introduces such a hit. + */ + if (png_ptr->gamma_table != NULL || png_ptr->gamma_16_table != NULL) + { + png_warning(png_ptr, "gamma table being rebuilt"); + png_destroy_gamma_table(png_ptr); + } + + if (bit_depth <= 8) + { + png_build_8bit_table(png_ptr, &png_ptr->gamma_table, + png_ptr->screen_gamma > 0 ? png_reciprocal2(png_ptr->colorspace.gamma, + png_ptr->screen_gamma) : PNG_FP_1); + +#if defined(PNG_READ_BACKGROUND_SUPPORTED) || \ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \ + defined(PNG_READ_RGB_TO_GRAY_SUPPORTED) + if (png_ptr->transformations & (PNG_COMPOSE | PNG_RGB_TO_GRAY)) + { + png_build_8bit_table(png_ptr, &png_ptr->gamma_to_1, + png_reciprocal(png_ptr->colorspace.gamma)); + + png_build_8bit_table(png_ptr, &png_ptr->gamma_from_1, + png_ptr->screen_gamma > 0 ? png_reciprocal(png_ptr->screen_gamma) : + png_ptr->colorspace.gamma/* Probably doing rgb_to_gray */); + } +#endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */ + } + else + { + png_byte shift, sig_bit; + + if (png_ptr->color_type & PNG_COLOR_MASK_COLOR) + { + sig_bit = png_ptr->sig_bit.red; + + if (png_ptr->sig_bit.green > sig_bit) + sig_bit = png_ptr->sig_bit.green; + + if (png_ptr->sig_bit.blue > sig_bit) + sig_bit = png_ptr->sig_bit.blue; + } + else + sig_bit = png_ptr->sig_bit.gray; + + /* 16-bit gamma code uses this equation: + * + * ov = table[(iv & 0xff) >> gamma_shift][iv >> 8] + * + * Where 'iv' is the input color value and 'ov' is the output value - + * pow(iv, gamma). + * + * Thus the gamma table consists of up to 256 256 entry tables. The table + * is selected by the (8-gamma_shift) most significant of the low 8 bits of + * the color value then indexed by the upper 8 bits: + * + * table[low bits][high 8 bits] + * + * So the table 'n' corresponds to all those 'iv' of: + * + * ..<(n+1 << gamma_shift)-1> + * + */ + if (sig_bit > 0 && sig_bit < 16U) + shift = (png_byte)(16U - sig_bit); /* shift == insignificant bits */ + + else + shift = 0; /* keep all 16 bits */ + + if (png_ptr->transformations & (PNG_16_TO_8 | PNG_SCALE_16_TO_8)) + { + /* PNG_MAX_GAMMA_8 is the number of bits to keep - effectively + * the significant bits in the *input* when the output will + * eventually be 8 bits. By default it is 11. + */ + if (shift < (16U - PNG_MAX_GAMMA_8)) + shift = (16U - PNG_MAX_GAMMA_8); + } + + if (shift > 8U) + shift = 8U; /* Guarantees at least one table! */ + + png_ptr->gamma_shift = shift; + +#ifdef PNG_16BIT_SUPPORTED + /* NOTE: prior to 1.5.4 this test used to include PNG_BACKGROUND (now + * PNG_COMPOSE). This effectively smashed the background calculation for + * 16-bit output because the 8-bit table assumes the result will be reduced + * to 8 bits. + */ + if (png_ptr->transformations & (PNG_16_TO_8 | PNG_SCALE_16_TO_8)) +#endif + png_build_16to8_table(png_ptr, &png_ptr->gamma_16_table, shift, + png_ptr->screen_gamma > 0 ? png_product2(png_ptr->colorspace.gamma, + png_ptr->screen_gamma) : PNG_FP_1); + +#ifdef PNG_16BIT_SUPPORTED + else + png_build_16bit_table(png_ptr, &png_ptr->gamma_16_table, shift, + png_ptr->screen_gamma > 0 ? png_reciprocal2(png_ptr->colorspace.gamma, + png_ptr->screen_gamma) : PNG_FP_1); +#endif + +#if defined(PNG_READ_BACKGROUND_SUPPORTED) || \ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \ + defined(PNG_READ_RGB_TO_GRAY_SUPPORTED) + if (png_ptr->transformations & (PNG_COMPOSE | PNG_RGB_TO_GRAY)) + { + png_build_16bit_table(png_ptr, &png_ptr->gamma_16_to_1, shift, + png_reciprocal(png_ptr->colorspace.gamma)); + + /* Notice that the '16 from 1' table should be full precision, however + * the lookup on this table still uses gamma_shift, so it can't be. + * TODO: fix this. + */ + png_build_16bit_table(png_ptr, &png_ptr->gamma_16_from_1, shift, + png_ptr->screen_gamma > 0 ? png_reciprocal(png_ptr->screen_gamma) : + png_ptr->colorspace.gamma/* Probably doing rgb_to_gray */); + } +#endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */ + } +} +#endif /* READ_GAMMA */ + +/* HARDWARE OPTION SUPPORT */ +#ifdef PNG_SET_OPTION_SUPPORTED +int PNGAPI +png_set_option(png_structrp png_ptr, int option, int onoff) +{ + if (png_ptr != NULL && option >= 0 && option < PNG_OPTION_NEXT && + (option & 1) == 0) + { + int mask = 3 << option; + int setting = (2 + (onoff != 0)) << option; + int current = png_ptr->options; + + png_ptr->options = (png_byte)((current & ~mask) | setting); + + return (current & mask) >> option; + } + + return PNG_OPTION_INVALID; +} +#endif + +/* sRGB support */ +#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) ||\ + defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) +/* sRGB conversion tables; these are machine generated with the code in + * contrib/tools/makesRGB.c. The actual sRGB transfer curve defined in the + * specification (see the article at http://en.wikipedia.org/wiki/SRGB) + * is used, not the gamma=1/2.2 approximation use elsewhere in libpng. + * The sRGB to linear table is exact (to the nearest 16 bit linear fraction). + * The inverse (linear to sRGB) table has accuracies as follows: + * + * For all possible (255*65535+1) input values: + * + * error: -0.515566 - 0.625971, 79441 (0.475369%) of readings inexact + * + * For the input values corresponding to the 65536 16-bit values: + * + * error: -0.513727 - 0.607759, 308 (0.469978%) of readings inexact + * + * In all cases the inexact readings are off by one. + */ + +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED +/* The convert-to-sRGB table is only currently required for read. */ +const png_uint_16 png_sRGB_table[256] = +{ + 0,20,40,60,80,99,119,139, + 159,179,199,219,241,264,288,313, + 340,367,396,427,458,491,526,562, + 599,637,677,718,761,805,851,898, + 947,997,1048,1101,1156,1212,1270,1330, + 1391,1453,1517,1583,1651,1720,1790,1863, + 1937,2013,2090,2170,2250,2333,2418,2504, + 2592,2681,2773,2866,2961,3058,3157,3258, + 3360,3464,3570,3678,3788,3900,4014,4129, + 4247,4366,4488,4611,4736,4864,4993,5124, + 5257,5392,5530,5669,5810,5953,6099,6246, + 6395,6547,6700,6856,7014,7174,7335,7500, + 7666,7834,8004,8177,8352,8528,8708,8889, + 9072,9258,9445,9635,9828,10022,10219,10417, + 10619,10822,11028,11235,11446,11658,11873,12090, + 12309,12530,12754,12980,13209,13440,13673,13909, + 14146,14387,14629,14874,15122,15371,15623,15878, + 16135,16394,16656,16920,17187,17456,17727,18001, + 18277,18556,18837,19121,19407,19696,19987,20281, + 20577,20876,21177,21481,21787,22096,22407,22721, + 23038,23357,23678,24002,24329,24658,24990,25325, + 25662,26001,26344,26688,27036,27386,27739,28094, + 28452,28813,29176,29542,29911,30282,30656,31033, + 31412,31794,32179,32567,32957,33350,33745,34143, + 34544,34948,35355,35764,36176,36591,37008,37429, + 37852,38278,38706,39138,39572,40009,40449,40891, + 41337,41785,42236,42690,43147,43606,44069,44534, + 45002,45473,45947,46423,46903,47385,47871,48359, + 48850,49344,49841,50341,50844,51349,51858,52369, + 52884,53401,53921,54445,54971,55500,56032,56567, + 57105,57646,58190,58737,59287,59840,60396,60955, + 61517,62082,62650,63221,63795,64372,64952,65535 +}; + +#endif /* simplified read only */ + +/* The base/delta tables are required for both read and write (but currently + * only the simplified versions.) + */ +const png_uint_16 png_sRGB_base[512] = +{ + 128,1782,3383,4644,5675,6564,7357,8074, + 8732,9346,9921,10463,10977,11466,11935,12384, + 12816,13233,13634,14024,14402,14769,15125,15473, + 15812,16142,16466,16781,17090,17393,17690,17981, + 18266,18546,18822,19093,19359,19621,19879,20133, + 20383,20630,20873,21113,21349,21583,21813,22041, + 22265,22487,22707,22923,23138,23350,23559,23767, + 23972,24175,24376,24575,24772,24967,25160,25352, + 25542,25730,25916,26101,26284,26465,26645,26823, + 27000,27176,27350,27523,27695,27865,28034,28201, + 28368,28533,28697,28860,29021,29182,29341,29500, + 29657,29813,29969,30123,30276,30429,30580,30730, + 30880,31028,31176,31323,31469,31614,31758,31902, + 32045,32186,32327,32468,32607,32746,32884,33021, + 33158,33294,33429,33564,33697,33831,33963,34095, + 34226,34357,34486,34616,34744,34873,35000,35127, + 35253,35379,35504,35629,35753,35876,35999,36122, + 36244,36365,36486,36606,36726,36845,36964,37083, + 37201,37318,37435,37551,37668,37783,37898,38013, + 38127,38241,38354,38467,38580,38692,38803,38915, + 39026,39136,39246,39356,39465,39574,39682,39790, + 39898,40005,40112,40219,40325,40431,40537,40642, + 40747,40851,40955,41059,41163,41266,41369,41471, + 41573,41675,41777,41878,41979,42079,42179,42279, + 42379,42478,42577,42676,42775,42873,42971,43068, + 43165,43262,43359,43456,43552,43648,43743,43839, + 43934,44028,44123,44217,44311,44405,44499,44592, + 44685,44778,44870,44962,45054,45146,45238,45329, + 45420,45511,45601,45692,45782,45872,45961,46051, + 46140,46229,46318,46406,46494,46583,46670,46758, + 46846,46933,47020,47107,47193,47280,47366,47452, + 47538,47623,47709,47794,47879,47964,48048,48133, + 48217,48301,48385,48468,48552,48635,48718,48801, + 48884,48966,49048,49131,49213,49294,49376,49458, + 49539,49620,49701,49782,49862,49943,50023,50103, + 50183,50263,50342,50422,50501,50580,50659,50738, + 50816,50895,50973,51051,51129,51207,51285,51362, + 51439,51517,51594,51671,51747,51824,51900,51977, + 52053,52129,52205,52280,52356,52432,52507,52582, + 52657,52732,52807,52881,52956,53030,53104,53178, + 53252,53326,53400,53473,53546,53620,53693,53766, + 53839,53911,53984,54056,54129,54201,54273,54345, + 54417,54489,54560,54632,54703,54774,54845,54916, + 54987,55058,55129,55199,55269,55340,55410,55480, + 55550,55620,55689,55759,55828,55898,55967,56036, + 56105,56174,56243,56311,56380,56448,56517,56585, + 56653,56721,56789,56857,56924,56992,57059,57127, + 57194,57261,57328,57395,57462,57529,57595,57662, + 57728,57795,57861,57927,57993,58059,58125,58191, + 58256,58322,58387,58453,58518,58583,58648,58713, + 58778,58843,58908,58972,59037,59101,59165,59230, + 59294,59358,59422,59486,59549,59613,59677,59740, + 59804,59867,59930,59993,60056,60119,60182,60245, + 60308,60370,60433,60495,60558,60620,60682,60744, + 60806,60868,60930,60992,61054,61115,61177,61238, + 61300,61361,61422,61483,61544,61605,61666,61727, + 61788,61848,61909,61969,62030,62090,62150,62211, + 62271,62331,62391,62450,62510,62570,62630,62689, + 62749,62808,62867,62927,62986,63045,63104,63163, + 63222,63281,63340,63398,63457,63515,63574,63632, + 63691,63749,63807,63865,63923,63981,64039,64097, + 64155,64212,64270,64328,64385,64443,64500,64557, + 64614,64672,64729,64786,64843,64900,64956,65013, + 65070,65126,65183,65239,65296,65352,65409,65465 +}; + +const png_byte png_sRGB_delta[512] = +{ + 207,201,158,129,113,100,90,82,77,72,68,64,61,59,56,54, + 52,50,49,47,46,45,43,42,41,40,39,39,38,37,36,36, + 35,34,34,33,33,32,32,31,31,30,30,30,29,29,28,28, + 28,27,27,27,27,26,26,26,25,25,25,25,24,24,24,24, + 23,23,23,23,23,22,22,22,22,22,22,21,21,21,21,21, + 21,20,20,20,20,20,20,20,20,19,19,19,19,19,19,19, + 19,18,18,18,18,18,18,18,18,18,18,17,17,17,17,17, + 17,17,17,17,17,17,16,16,16,16,16,16,16,16,16,16, + 16,16,16,16,15,15,15,15,15,15,15,15,15,15,15,15, + 15,15,15,15,14,14,14,14,14,14,14,14,14,14,14,14, + 14,14,14,14,14,14,14,13,13,13,13,13,13,13,13,13, + 13,13,13,13,13,13,13,13,13,13,13,13,13,13,12,12, + 12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12, + 12,12,12,12,12,12,12,12,12,12,12,12,11,11,11,11, + 11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11, + 11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11, + 11,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10, + 10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10, + 10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10, + 10,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9, + 9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9, + 9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9, + 9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9, + 9,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, + 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, + 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, + 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, + 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, + 8,8,8,8,8,8,8,8,8,7,7,7,7,7,7,7, + 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, + 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, + 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7 +}; +#endif /* SIMPLIFIED READ/WRITE sRGB support */ + +/* SIMPLIFIED READ/WRITE SUPPORT */ +#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) ||\ + defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) +static int +png_image_free_function(png_voidp argument) +{ + png_imagep image = png_voidcast(png_imagep, argument); + png_controlp cp = image->opaque; + png_control c; + + /* Double check that we have a png_ptr - it should be impossible to get here + * without one. + */ + if (cp->png_ptr == NULL) + return 0; + + /* First free any data held in the control structure. */ +# ifdef PNG_STDIO_SUPPORTED + if (cp->owned_file) + { + FILE *fp = png_voidcast(FILE*, cp->png_ptr->io_ptr); + cp->owned_file = 0; + + /* Ignore errors here. */ + if (fp != NULL) + { + cp->png_ptr->io_ptr = NULL; + (void)fclose(fp); + } + } +# endif + + /* Copy the control structure so that the original, allocated, version can be + * safely freed. Notice that a png_error here stops the remainder of the + * cleanup, but this is probably fine because that would indicate bad memory + * problems anyway. + */ + c = *cp; + image->opaque = &c; + png_free(c.png_ptr, cp); + + /* Then the structures, calling the correct API. */ + if (c.for_write) + { +# ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED + png_destroy_write_struct(&c.png_ptr, &c.info_ptr); +# else + png_error(c.png_ptr, "simplified write not supported"); +# endif + } + else + { +# ifdef PNG_SIMPLIFIED_READ_SUPPORTED + png_destroy_read_struct(&c.png_ptr, &c.info_ptr, NULL); +# else + png_error(c.png_ptr, "simplified read not supported"); +# endif + } + + /* Success. */ + return 1; +} + +void PNGAPI +png_image_free(png_imagep image) +{ + /* Safely call the real function, but only if doing so is safe at this point + * (if not inside an error handling context). Otherwise assume + * png_safe_execute will call this API after the return. + */ + if (image != NULL && image->opaque != NULL && + image->opaque->error_buf == NULL) + { + /* Ignore errors here: */ + (void)png_safe_execute(image, png_image_free_function, image); + image->opaque = NULL; + } +} + +int /* PRIVATE */ +png_image_error(png_imagep image, png_const_charp error_message) +{ + /* Utility to log an error. */ + png_safecat(image->message, (sizeof image->message), 0, error_message); + image->warning_or_error |= PNG_IMAGE_ERROR; + png_image_free(image); + return 0; +} + +#endif /* SIMPLIFIED READ/WRITE */ +#endif /* defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) */ diff --git a/src/SDL2/external/libpng-1.6.2/png.h b/src/SDL2/external/libpng-1.6.2/png.h new file mode 100644 index 000000000..0b5053fcf --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/png.h @@ -0,0 +1,3304 @@ + +/* png.h - header file for PNG reference library + * + * libpng version 1.6.2 - April 25, 2013 + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license (See LICENSE, below) + * + * Authors and maintainers: + * libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat + * libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger + * libpng versions 0.97, January 1998, through 1.6.2 - April 25, 2013: Glenn + * See also "Contributing Authors", below. + * + * Note about libpng version numbers: + * + * Due to various miscommunications, unforeseen code incompatibilities + * and occasional factors outside the authors' control, version numbering + * on the library has not always been consistent and straightforward. + * The following table summarizes matters since version 0.89c, which was + * the first widely used release: + * + * source png.h png.h shared-lib + * version string int version + * ------- ------ ----- ---------- + * 0.89c "1.0 beta 3" 0.89 89 1.0.89 + * 0.90 "1.0 beta 4" 0.90 90 0.90 [should have been 2.0.90] + * 0.95 "1.0 beta 5" 0.95 95 0.95 [should have been 2.0.95] + * 0.96 "1.0 beta 6" 0.96 96 0.96 [should have been 2.0.96] + * 0.97b "1.00.97 beta 7" 1.00.97 97 1.0.1 [should have been 2.0.97] + * 0.97c 0.97 97 2.0.97 + * 0.98 0.98 98 2.0.98 + * 0.99 0.99 98 2.0.99 + * 0.99a-m 0.99 99 2.0.99 + * 1.00 1.00 100 2.1.0 [100 should be 10000] + * 1.0.0 (from here on, the 100 2.1.0 [100 should be 10000] + * 1.0.1 png.h string is 10001 2.1.0 + * 1.0.1a-e identical to the 10002 from here on, the shared library + * 1.0.2 source version) 10002 is 2.V where V is the source code + * 1.0.2a-b 10003 version, except as noted. + * 1.0.3 10003 + * 1.0.3a-d 10004 + * 1.0.4 10004 + * 1.0.4a-f 10005 + * 1.0.5 (+ 2 patches) 10005 + * 1.0.5a-d 10006 + * 1.0.5e-r 10100 (not source compatible) + * 1.0.5s-v 10006 (not binary compatible) + * 1.0.6 (+ 3 patches) 10006 (still binary incompatible) + * 1.0.6d-f 10007 (still binary incompatible) + * 1.0.6g 10007 + * 1.0.6h 10007 10.6h (testing xy.z so-numbering) + * 1.0.6i 10007 10.6i + * 1.0.6j 10007 2.1.0.6j (incompatible with 1.0.0) + * 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 (binary compatible) + * 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 (binary compatible) + * 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 (binary compatible) + * 1.0.7 1 10007 (still compatible) + * 1.0.8beta1-4 1 10008 2.1.0.8beta1-4 + * 1.0.8rc1 1 10008 2.1.0.8rc1 + * 1.0.8 1 10008 2.1.0.8 + * 1.0.9beta1-6 1 10009 2.1.0.9beta1-6 + * 1.0.9rc1 1 10009 2.1.0.9rc1 + * 1.0.9beta7-10 1 10009 2.1.0.9beta7-10 + * 1.0.9rc2 1 10009 2.1.0.9rc2 + * 1.0.9 1 10009 2.1.0.9 + * 1.0.10beta1 1 10010 2.1.0.10beta1 + * 1.0.10rc1 1 10010 2.1.0.10rc1 + * 1.0.10 1 10010 2.1.0.10 + * 1.0.11beta1-3 1 10011 2.1.0.11beta1-3 + * 1.0.11rc1 1 10011 2.1.0.11rc1 + * 1.0.11 1 10011 2.1.0.11 + * 1.0.12beta1-2 2 10012 2.1.0.12beta1-2 + * 1.0.12rc1 2 10012 2.1.0.12rc1 + * 1.0.12 2 10012 2.1.0.12 + * 1.1.0a-f - 10100 2.1.1.0a-f (branch abandoned) + * 1.2.0beta1-2 2 10200 2.1.2.0beta1-2 + * 1.2.0beta3-5 3 10200 3.1.2.0beta3-5 + * 1.2.0rc1 3 10200 3.1.2.0rc1 + * 1.2.0 3 10200 3.1.2.0 + * 1.2.1beta1-4 3 10201 3.1.2.1beta1-4 + * 1.2.1rc1-2 3 10201 3.1.2.1rc1-2 + * 1.2.1 3 10201 3.1.2.1 + * 1.2.2beta1-6 12 10202 12.so.0.1.2.2beta1-6 + * 1.0.13beta1 10 10013 10.so.0.1.0.13beta1 + * 1.0.13rc1 10 10013 10.so.0.1.0.13rc1 + * 1.2.2rc1 12 10202 12.so.0.1.2.2rc1 + * 1.0.13 10 10013 10.so.0.1.0.13 + * 1.2.2 12 10202 12.so.0.1.2.2 + * 1.2.3rc1-6 12 10203 12.so.0.1.2.3rc1-6 + * 1.2.3 12 10203 12.so.0.1.2.3 + * 1.2.4beta1-3 13 10204 12.so.0.1.2.4beta1-3 + * 1.0.14rc1 13 10014 10.so.0.1.0.14rc1 + * 1.2.4rc1 13 10204 12.so.0.1.2.4rc1 + * 1.0.14 10 10014 10.so.0.1.0.14 + * 1.2.4 13 10204 12.so.0.1.2.4 + * 1.2.5beta1-2 13 10205 12.so.0.1.2.5beta1-2 + * 1.0.15rc1-3 10 10015 10.so.0.1.0.15rc1-3 + * 1.2.5rc1-3 13 10205 12.so.0.1.2.5rc1-3 + * 1.0.15 10 10015 10.so.0.1.0.15 + * 1.2.5 13 10205 12.so.0.1.2.5 + * 1.2.6beta1-4 13 10206 12.so.0.1.2.6beta1-4 + * 1.0.16 10 10016 10.so.0.1.0.16 + * 1.2.6 13 10206 12.so.0.1.2.6 + * 1.2.7beta1-2 13 10207 12.so.0.1.2.7beta1-2 + * 1.0.17rc1 10 10017 12.so.0.1.0.17rc1 + * 1.2.7rc1 13 10207 12.so.0.1.2.7rc1 + * 1.0.17 10 10017 12.so.0.1.0.17 + * 1.2.7 13 10207 12.so.0.1.2.7 + * 1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5 + * 1.0.18rc1-5 10 10018 12.so.0.1.0.18rc1-5 + * 1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5 + * 1.0.18 10 10018 12.so.0.1.0.18 + * 1.2.8 13 10208 12.so.0.1.2.8 + * 1.2.9beta1-3 13 10209 12.so.0.1.2.9beta1-3 + * 1.2.9beta4-11 13 10209 12.so.0.9[.0] + * 1.2.9rc1 13 10209 12.so.0.9[.0] + * 1.2.9 13 10209 12.so.0.9[.0] + * 1.2.10beta1-7 13 10210 12.so.0.10[.0] + * 1.2.10rc1-2 13 10210 12.so.0.10[.0] + * 1.2.10 13 10210 12.so.0.10[.0] + * 1.4.0beta1-5 14 10400 14.so.0.0[.0] + * 1.2.11beta1-4 13 10211 12.so.0.11[.0] + * 1.4.0beta7-8 14 10400 14.so.0.0[.0] + * 1.2.11 13 10211 12.so.0.11[.0] + * 1.2.12 13 10212 12.so.0.12[.0] + * 1.4.0beta9-14 14 10400 14.so.0.0[.0] + * 1.2.13 13 10213 12.so.0.13[.0] + * 1.4.0beta15-36 14 10400 14.so.0.0[.0] + * 1.4.0beta37-87 14 10400 14.so.14.0[.0] + * 1.4.0rc01 14 10400 14.so.14.0[.0] + * 1.4.0beta88-109 14 10400 14.so.14.0[.0] + * 1.4.0rc02-08 14 10400 14.so.14.0[.0] + * 1.4.0 14 10400 14.so.14.0[.0] + * 1.4.1beta01-03 14 10401 14.so.14.1[.0] + * 1.4.1rc01 14 10401 14.so.14.1[.0] + * 1.4.1beta04-12 14 10401 14.so.14.1[.0] + * 1.4.1 14 10401 14.so.14.1[.0] + * 1.4.2 14 10402 14.so.14.2[.0] + * 1.4.3 14 10403 14.so.14.3[.0] + * 1.4.4 14 10404 14.so.14.4[.0] + * 1.5.0beta01-58 15 10500 15.so.15.0[.0] + * 1.5.0rc01-07 15 10500 15.so.15.0[.0] + * 1.5.0 15 10500 15.so.15.0[.0] + * 1.5.1beta01-11 15 10501 15.so.15.1[.0] + * 1.5.1rc01-02 15 10501 15.so.15.1[.0] + * 1.5.1 15 10501 15.so.15.1[.0] + * 1.5.2beta01-03 15 10502 15.so.15.2[.0] + * 1.5.2rc01-03 15 10502 15.so.15.2[.0] + * 1.5.2 15 10502 15.so.15.2[.0] + * 1.5.3beta01-10 15 10503 15.so.15.3[.0] + * 1.5.3rc01-02 15 10503 15.so.15.3[.0] + * 1.5.3beta11 15 10503 15.so.15.3[.0] + * 1.5.3 [omitted] + * 1.5.4beta01-08 15 10504 15.so.15.4[.0] + * 1.5.4rc01 15 10504 15.so.15.4[.0] + * 1.5.4 15 10504 15.so.15.4[.0] + * 1.5.5beta01-08 15 10505 15.so.15.5[.0] + * 1.5.5rc01 15 10505 15.so.15.5[.0] + * 1.5.5 15 10505 15.so.15.5[.0] + * 1.5.6beta01-07 15 10506 15.so.15.6[.0] + * 1.5.6rc01-03 15 10506 15.so.15.6[.0] + * 1.5.6 15 10506 15.so.15.6[.0] + * 1.5.7beta01-05 15 10507 15.so.15.7[.0] + * 1.5.7rc01-03 15 10507 15.so.15.7[.0] + * 1.5.7 15 10507 15.so.15.7[.0] + * 1.6.0beta01-40 16 10600 16.so.16.0[.0] + * 1.6.0rc01-08 16 10600 16.so.16.0[.0] + * 1.6.0 16 10600 16.so.16.0[.0] + * 1.6.1beta01-09 16 10601 16.so.16.1[.0] + * 1.6.1rc01 16 10601 16.so.16.1[.0] + * 1.6.1 16 10601 16.so.16.1[.0] + * 1.6.2beta01 16 10602 16.so.16.2[.0] + * 1.6.2rc01-06 16 10602 16.so.16.2[.0] + * 1.6.2 16 10602 16.so.16.2[.0] + * + * Henceforth the source version will match the shared-library major + * and minor numbers; the shared-library major version number will be + * used for changes in backward compatibility, as it is intended. The + * PNG_LIBPNG_VER macro, which is not used within libpng but is available + * for applications, is an unsigned integer of the form xyyzz corresponding + * to the source version x.y.z (leading zeros in y and z). Beta versions + * were given the previous public release number plus a letter, until + * version 1.0.6j; from then on they were given the upcoming public + * release number plus "betaNN" or "rcNN". + * + * Binary incompatibility exists only when applications make direct access + * to the info_ptr or png_ptr members through png.h, and the compiled + * application is loaded with a different version of the library. + * + * DLLNUM will change each time there are forward or backward changes + * in binary compatibility (e.g., when a new feature is added). + * + * See libpng-manual.txt or libpng.3 for more information. The PNG + * specification is available as a W3C Recommendation and as an ISO + * Specification, defines should NOT be changed. + */ +#define PNG_INFO_gAMA 0x0001 +#define PNG_INFO_sBIT 0x0002 +#define PNG_INFO_cHRM 0x0004 +#define PNG_INFO_PLTE 0x0008 +#define PNG_INFO_tRNS 0x0010 +#define PNG_INFO_bKGD 0x0020 +#define PNG_INFO_hIST 0x0040 +#define PNG_INFO_pHYs 0x0080 +#define PNG_INFO_oFFs 0x0100 +#define PNG_INFO_tIME 0x0200 +#define PNG_INFO_pCAL 0x0400 +#define PNG_INFO_sRGB 0x0800 /* GR-P, 0.96a */ +#define PNG_INFO_iCCP 0x1000 /* ESR, 1.0.6 */ +#define PNG_INFO_sPLT 0x2000 /* ESR, 1.0.6 */ +#define PNG_INFO_sCAL 0x4000 /* ESR, 1.0.6 */ +#define PNG_INFO_IDAT 0x8000 /* ESR, 1.0.6 */ + +/* This is used for the transformation routines, as some of them + * change these values for the row. It also should enable using + * the routines for other purposes. + */ +typedef struct png_row_info_struct +{ + png_uint_32 width; /* width of row */ + png_size_t rowbytes; /* number of bytes in row */ + png_byte color_type; /* color type of row */ + png_byte bit_depth; /* bit depth of row */ + png_byte channels; /* number of channels (1, 2, 3, or 4) */ + png_byte pixel_depth; /* bits per pixel (depth * channels) */ +} png_row_info; + +typedef png_row_info * png_row_infop; +typedef png_row_info * * png_row_infopp; + +/* These are the function types for the I/O functions and for the functions + * that allow the user to override the default I/O functions with his or her + * own. The png_error_ptr type should match that of user-supplied warning + * and error functions, while the png_rw_ptr type should match that of the + * user read/write data functions. Note that the 'write' function must not + * modify the buffer it is passed. The 'read' function, on the other hand, is + * expected to return the read data in the buffer. + */ +typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp)); +typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, png_size_t)); +typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp)); +typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32, + int)); +typedef PNG_CALLBACK(void, *png_write_status_ptr, (png_structp, png_uint_32, + int)); + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +typedef PNG_CALLBACK(void, *png_progressive_info_ptr, (png_structp, png_infop)); +typedef PNG_CALLBACK(void, *png_progressive_end_ptr, (png_structp, png_infop)); + +/* The following callback receives png_uint_32 row_number, int pass for the + * png_bytep data of the row. When transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +typedef PNG_CALLBACK(void, *png_progressive_row_ptr, (png_structp, png_bytep, + png_uint_32, int)); +#endif + +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ + defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) +typedef PNG_CALLBACK(void, *png_user_transform_ptr, (png_structp, png_row_infop, + png_bytep)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +typedef PNG_CALLBACK(int, *png_user_chunk_ptr, (png_structp, + png_unknown_chunkp)); +#endif +#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED +/* not used anywhere */ +/* typedef PNG_CALLBACK(void, *png_unknown_chunk_ptr, (png_structp)); */ +#endif + +#ifdef PNG_SETJMP_SUPPORTED +/* This must match the function definition in , and the application + * must include this before png.h to obtain the definition of jmp_buf. The + * function is required to be PNG_NORETURN, but this is not checked. If the + * function does return the application will crash via an abort() or similar + * system level call. + * + * If you get a warning here while building the library you may need to make + * changes to ensure that pnglibconf.h records the calling convention used by + * your compiler. This may be very difficult - try using a different compiler + * to build the library! + */ +PNG_FUNCTION(void, (PNGCAPI *png_longjmp_ptr), PNGARG((jmp_buf, int)), typedef); +#endif + +/* Transform masks for the high-level interface */ +#define PNG_TRANSFORM_IDENTITY 0x0000 /* read and write */ +#define PNG_TRANSFORM_STRIP_16 0x0001 /* read only */ +#define PNG_TRANSFORM_STRIP_ALPHA 0x0002 /* read only */ +#define PNG_TRANSFORM_PACKING 0x0004 /* read and write */ +#define PNG_TRANSFORM_PACKSWAP 0x0008 /* read and write */ +#define PNG_TRANSFORM_EXPAND 0x0010 /* read only */ +#define PNG_TRANSFORM_INVERT_MONO 0x0020 /* read and write */ +#define PNG_TRANSFORM_SHIFT 0x0040 /* read and write */ +#define PNG_TRANSFORM_BGR 0x0080 /* read and write */ +#define PNG_TRANSFORM_SWAP_ALPHA 0x0100 /* read and write */ +#define PNG_TRANSFORM_SWAP_ENDIAN 0x0200 /* read and write */ +#define PNG_TRANSFORM_INVERT_ALPHA 0x0400 /* read and write */ +#define PNG_TRANSFORM_STRIP_FILLER 0x0800 /* write only */ +/* Added to libpng-1.2.34 */ +#define PNG_TRANSFORM_STRIP_FILLER_BEFORE PNG_TRANSFORM_STRIP_FILLER +#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* write only */ +/* Added to libpng-1.4.0 */ +#define PNG_TRANSFORM_GRAY_TO_RGB 0x2000 /* read only */ +/* Added to libpng-1.5.4 */ +#define PNG_TRANSFORM_EXPAND_16 0x4000 /* read only */ +#define PNG_TRANSFORM_SCALE_16 0x8000 /* read only */ + +/* Flags for MNG supported features */ +#define PNG_FLAG_MNG_EMPTY_PLTE 0x01 +#define PNG_FLAG_MNG_FILTER_64 0x04 +#define PNG_ALL_MNG_FEATURES 0x05 + +/* NOTE: prior to 1.5 these functions had no 'API' style declaration, + * this allowed the zlib default functions to be used on Windows + * platforms. In 1.5 the zlib default malloc (which just calls malloc and + * ignores the first argument) should be completely compatible with the + * following. + */ +typedef PNG_CALLBACK(png_voidp, *png_malloc_ptr, (png_structp, + png_alloc_size_t)); +typedef PNG_CALLBACK(void, *png_free_ptr, (png_structp, png_voidp)); + +/* Section 3: exported functions + * Here are the function definitions most commonly used. This is not + * the place to find out how to use libpng. See libpng-manual.txt for the + * full explanation, see example.c for the summary. This just provides + * a simple one line description of the use of each function. + * + * The PNG_EXPORT() and PNG_EXPORTA() macros used below are defined in + * pngconf.h and in the *.dfn files in the scripts directory. + * + * PNG_EXPORT(ordinal, type, name, (args)); + * + * ordinal: ordinal that is used while building + * *.def files. The ordinal value is only + * relevant when preprocessing png.h with + * the *.dfn files for building symbol table + * entries, and are removed by pngconf.h. + * type: return type of the function + * name: function name + * args: function arguments, with types + * + * When we wish to append attributes to a function prototype we use + * the PNG_EXPORTA() macro instead. + * + * PNG_EXPORTA(ordinal, type, name, (args), attributes); + * + * ordinal, type, name, and args: same as in PNG_EXPORT(). + * attributes: function attributes + */ + +/* Returns the version number of the library */ +PNG_EXPORT(1, png_uint_32, png_access_version_number, (void)); + +/* Tell lib we have already handled the first magic bytes. + * Handling more than 8 bytes from the beginning of the file is an error. + */ +PNG_EXPORT(2, void, png_set_sig_bytes, (png_structrp png_ptr, int num_bytes)); + +/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a + * PNG file. Returns zero if the supplied bytes match the 8-byte PNG + * signature, and non-zero otherwise. Having num_to_check == 0 or + * start > 7 will always fail (ie return non-zero). + */ +PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, png_size_t start, + png_size_t num_to_check)); + +/* Simple signature checking function. This is the same as calling + * png_check_sig(sig, n) := !png_sig_cmp(sig, 0, n). + */ +#define png_check_sig(sig, n) !png_sig_cmp((sig), 0, (n)) + +/* Allocate and initialize png_ptr struct for reading, and any other memory. */ +PNG_EXPORTA(4, png_structp, png_create_read_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn), + PNG_ALLOCATED); + +/* Allocate and initialize png_ptr struct for writing, and any other memory */ +PNG_EXPORTA(5, png_structp, png_create_write_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn), + PNG_ALLOCATED); + +PNG_EXPORT(6, png_size_t, png_get_compression_buffer_size, + (png_const_structrp png_ptr)); + +PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structrp png_ptr, + png_size_t size)); + +/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp + * match up. + */ +#ifdef PNG_SETJMP_SUPPORTED +/* This function returns the jmp_buf built in to *png_ptr. It must be + * supplied with an appropriate 'longjmp' function to use on that jmp_buf + * unless the default error function is overridden in which case NULL is + * acceptable. The size of the jmp_buf is checked against the actual size + * allocated by the library - the call will return NULL on a mismatch + * indicating an ABI mismatch. + */ +PNG_EXPORT(8, jmp_buf*, png_set_longjmp_fn, (png_structrp png_ptr, + png_longjmp_ptr longjmp_fn, size_t jmp_buf_size)); +# define png_jmpbuf(png_ptr) \ + (*png_set_longjmp_fn((png_ptr), longjmp, (sizeof (jmp_buf)))) +#else +# define png_jmpbuf(png_ptr) \ + (LIBPNG_WAS_COMPILED_WITH__PNG_NO_SETJMP) +#endif +/* This function should be used by libpng applications in place of + * longjmp(png_ptr->jmpbuf, val). If longjmp_fn() has been set, it + * will use it; otherwise it will call PNG_ABORT(). This function was + * added in libpng-1.5.0. + */ +PNG_EXPORTA(9, void, png_longjmp, (png_const_structrp png_ptr, int val), + PNG_NORETURN); + +#ifdef PNG_READ_SUPPORTED +/* Reset the compression stream */ +PNG_EXPORTA(10, int, png_reset_zstream, (png_structrp png_ptr), PNG_DEPRECATED); +#endif + +/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */ +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(11, png_structp, png_create_read_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +PNG_EXPORTA(12, png_structp, png_create_write_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +#endif + +/* Write the PNG file signature. */ +PNG_EXPORT(13, void, png_write_sig, (png_structrp png_ptr)); + +/* Write a PNG chunk - size, type, (optional) data, CRC. */ +PNG_EXPORT(14, void, png_write_chunk, (png_structrp png_ptr, png_const_bytep + chunk_name, png_const_bytep data, png_size_t length)); + +/* Write the start of a PNG chunk - length and chunk name. */ +PNG_EXPORT(15, void, png_write_chunk_start, (png_structrp png_ptr, + png_const_bytep chunk_name, png_uint_32 length)); + +/* Write the data of a PNG chunk started with png_write_chunk_start(). */ +PNG_EXPORT(16, void, png_write_chunk_data, (png_structrp png_ptr, + png_const_bytep data, png_size_t length)); + +/* Finish a chunk started with png_write_chunk_start() (includes CRC). */ +PNG_EXPORT(17, void, png_write_chunk_end, (png_structrp png_ptr)); + +/* Allocate and initialize the info structure */ +PNG_EXPORTA(18, png_infop, png_create_info_struct, (png_const_structrp png_ptr), + PNG_ALLOCATED); + +/* DEPRECATED: this function allowed init structures to be created using the + * default allocation method (typically malloc). Use is deprecated in 1.6.0 and + * the API will be removed in the future. + */ +PNG_EXPORTA(19, void, png_info_init_3, (png_infopp info_ptr, + png_size_t png_info_struct_size), PNG_DEPRECATED); + +/* Writes all the PNG information before the image. */ +PNG_EXPORT(20, void, png_write_info_before_PLTE, + (png_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(21, void, png_write_info, + (png_structrp png_ptr, png_const_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the information before the actual image data. */ +PNG_EXPORT(22, void, png_read_info, + (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +#ifdef PNG_TIME_RFC1123_SUPPORTED + /* Convert to a US string format: there is no localization support in this + * routine. The original implementation used a 29 character buffer in + * png_struct, this will be removed in future versions. + */ +#if PNG_LIBPNG_VER < 10700 +/* To do: remove this from libpng17 (and from libpng17/png.c and pngstruct.h) */ +PNG_EXPORTA(23, png_const_charp, png_convert_to_rfc1123, (png_structrp png_ptr, + png_const_timep ptime),PNG_DEPRECATED); +#endif +PNG_EXPORT(241, int, png_convert_to_rfc1123_buffer, (char out[29], + png_const_timep ptime)); +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED +/* Convert from a struct tm to png_time */ +PNG_EXPORT(24, void, png_convert_from_struct_tm, (png_timep ptime, + const struct tm * ttime)); + +/* Convert from time_t to png_time. Uses gmtime() */ +PNG_EXPORT(25, void, png_convert_from_time_t, (png_timep ptime, time_t ttime)); +#endif /* PNG_CONVERT_tIME_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */ +PNG_EXPORT(26, void, png_set_expand, (png_structrp png_ptr)); +PNG_EXPORT(27, void, png_set_expand_gray_1_2_4_to_8, (png_structrp png_ptr)); +PNG_EXPORT(28, void, png_set_palette_to_rgb, (png_structrp png_ptr)); +PNG_EXPORT(29, void, png_set_tRNS_to_alpha, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* Expand to 16-bit channels, forces conversion of palette to RGB and expansion + * of a tRNS chunk if present. + */ +PNG_EXPORT(221, void, png_set_expand_16, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) +/* Use blue, green, red order for pixels. */ +PNG_EXPORT(30, void, png_set_bgr, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +/* Expand the grayscale to 24-bit RGB if necessary. */ +PNG_EXPORT(31, void, png_set_gray_to_rgb, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +/* Reduce RGB to grayscale. */ +#define PNG_ERROR_ACTION_NONE 1 +#define PNG_ERROR_ACTION_WARN 2 +#define PNG_ERROR_ACTION_ERROR 3 +#define PNG_RGB_TO_GRAY_DEFAULT (-1)/*for red/green coefficients*/ + +PNG_FP_EXPORT(32, void, png_set_rgb_to_gray, (png_structrp png_ptr, + int error_action, double red, double green)) +PNG_FIXED_EXPORT(33, void, png_set_rgb_to_gray_fixed, (png_structrp png_ptr, + int error_action, png_fixed_point red, png_fixed_point green)) + +PNG_EXPORT(34, png_byte, png_get_rgb_to_gray_status, (png_const_structrp + png_ptr)); +#endif + +#ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +PNG_EXPORT(35, void, png_build_grayscale_palette, (int bit_depth, + png_colorp palette)); +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED +/* How the alpha channel is interpreted - this affects how the color channels of + * a PNG file are returned when an alpha channel, or tRNS chunk in a palette + * file, is present. + * + * This has no effect on the way pixels are written into a PNG output + * datastream. The color samples in a PNG datastream are never premultiplied + * with the alpha samples. + * + * The default is to return data according to the PNG specification: the alpha + * channel is a linear measure of the contribution of the pixel to the + * corresponding composited pixel. The gamma encoded color channels must be + * scaled according to the contribution and to do this it is necessary to undo + * the encoding, scale the color values, perform the composition and reencode + * the values. This is the 'PNG' mode. + * + * The alternative is to 'associate' the alpha with the color information by + * storing color channel values that have been scaled by the alpha. The + * advantage is that the color channels can be resampled (the image can be + * scaled) in this form. The disadvantage is that normal practice is to store + * linear, not (gamma) encoded, values and this requires 16-bit channels for + * still images rather than the 8-bit channels that are just about sufficient if + * gamma encoding is used. In addition all non-transparent pixel values, + * including completely opaque ones, must be gamma encoded to produce the final + * image. This is the 'STANDARD', 'ASSOCIATED' or 'PREMULTIPLIED' mode (the + * latter being the two common names for associated alpha color channels.) + * + * Since it is not necessary to perform arithmetic on opaque color values so + * long as they are not to be resampled and are in the final color space it is + * possible to optimize the handling of alpha by storing the opaque pixels in + * the PNG format (adjusted for the output color space) while storing partially + * opaque pixels in the standard, linear, format. The accuracy required for + * standard alpha composition is relatively low, because the pixels are + * isolated, therefore typically the accuracy loss in storing 8-bit linear + * values is acceptable. (This is not true if the alpha channel is used to + * simulate transparency over large areas - use 16 bits or the PNG mode in + * this case!) This is the 'OPTIMIZED' mode. For this mode a pixel is + * treated as opaque only if the alpha value is equal to the maximum value. + * + * The final choice is to gamma encode the alpha channel as well. This is + * broken because, in practice, no implementation that uses this choice + * correctly undoes the encoding before handling alpha composition. Use this + * choice only if other serious errors in the software or hardware you use + * mandate it; the typical serious error is for dark halos to appear around + * opaque areas of the composited PNG image because of arithmetic overflow. + * + * The API function png_set_alpha_mode specifies which of these choices to use + * with an enumerated 'mode' value and the gamma of the required output: + */ +#define PNG_ALPHA_PNG 0 /* according to the PNG standard */ +#define PNG_ALPHA_STANDARD 1 /* according to Porter/Duff */ +#define PNG_ALPHA_ASSOCIATED 1 /* as above; this is the normal practice */ +#define PNG_ALPHA_PREMULTIPLIED 1 /* as above */ +#define PNG_ALPHA_OPTIMIZED 2 /* 'PNG' for opaque pixels, else 'STANDARD' */ +#define PNG_ALPHA_BROKEN 3 /* the alpha channel is gamma encoded */ + +PNG_FP_EXPORT(227, void, png_set_alpha_mode, (png_structrp png_ptr, int mode, + double output_gamma)) +PNG_FIXED_EXPORT(228, void, png_set_alpha_mode_fixed, (png_structrp png_ptr, + int mode, png_fixed_point output_gamma)) +#endif + +#if defined(PNG_GAMMA_SUPPORTED) || defined(PNG_READ_ALPHA_MODE_SUPPORTED) +/* The output_gamma value is a screen gamma in libpng terminology: it expresses + * how to decode the output values, not how they are encoded. The values used + * correspond to the normal numbers used to describe the overall gamma of a + * computer display system; for example 2.2 for an sRGB conformant system. The + * values are scaled by 100000 in the _fixed version of the API (so 220000 for + * sRGB.) + * + * The inverse of the value is always used to provide a default for the PNG file + * encoding if it has no gAMA chunk and if png_set_gamma() has not been called + * to override the PNG gamma information. + * + * When the ALPHA_OPTIMIZED mode is selected the output gamma is used to encode + * opaque pixels however pixels with lower alpha values are not encoded, + * regardless of the output gamma setting. + * + * When the standard Porter Duff handling is requested with mode 1 the output + * encoding is set to be linear and the output_gamma value is only relevant + * as a default for input data that has no gamma information. The linear output + * encoding will be overridden if png_set_gamma() is called - the results may be + * highly unexpected! + * + * The following numbers are derived from the sRGB standard and the research + * behind it. sRGB is defined to be approximated by a PNG gAMA chunk value of + * 0.45455 (1/2.2) for PNG. The value implicitly includes any viewing + * correction required to take account of any differences in the color + * environment of the original scene and the intended display environment; the + * value expresses how to *decode* the image for display, not how the original + * data was *encoded*. + * + * sRGB provides a peg for the PNG standard by defining a viewing environment. + * sRGB itself, and earlier TV standards, actually use a more complex transform + * (a linear portion then a gamma 2.4 power law) than PNG can express. (PNG is + * limited to simple power laws.) By saying that an image for direct display on + * an sRGB conformant system should be stored with a gAMA chunk value of 45455 + * (11.3.3.2 and 11.3.3.5 of the ISO PNG specification) the PNG specification + * makes it possible to derive values for other display systems and + * environments. + * + * The Mac value is deduced from the sRGB based on an assumption that the actual + * extra viewing correction used in early Mac display systems was implemented as + * a power 1.45 lookup table. + * + * Any system where a programmable lookup table is used or where the behavior of + * the final display device characteristics can be changed requires system + * specific code to obtain the current characteristic. However this can be + * difficult and most PNG gamma correction only requires an approximate value. + * + * By default, if png_set_alpha_mode() is not called, libpng assumes that all + * values are unencoded, linear, values and that the output device also has a + * linear characteristic. This is only very rarely correct - it is invariably + * better to call png_set_alpha_mode() with PNG_DEFAULT_sRGB than rely on the + * default if you don't know what the right answer is! + * + * The special value PNG_GAMMA_MAC_18 indicates an older Mac system (pre Mac OS + * 10.6) which used a correction table to implement a somewhat lower gamma on an + * otherwise sRGB system. + * + * Both these values are reserved (not simple gamma values) in order to allow + * more precise correction internally in the future. + * + * NOTE: the following values can be passed to either the fixed or floating + * point APIs, but the floating point API will also accept floating point + * values. + */ +#define PNG_DEFAULT_sRGB -1 /* sRGB gamma and color space */ +#define PNG_GAMMA_MAC_18 -2 /* Old Mac '1.8' gamma and color space */ +#define PNG_GAMMA_sRGB 220000 /* Television standards--matches sRGB gamma */ +#define PNG_GAMMA_LINEAR PNG_FP_1 /* Linear */ +#endif + +/* The following are examples of calls to png_set_alpha_mode to achieve the + * required overall gamma correction and, where necessary, alpha + * premultiplication. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * This is the default libpng handling of the alpha channel - it is not + * pre-multiplied into the color components. In addition the call states + * that the output is for a sRGB system and causes all PNG files without gAMA + * chunks to be assumed to be encoded using sRGB. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * In this case the output is assumed to be something like an sRGB conformant + * display preceeded by a power-law lookup table of power 1.45. This is how + * early Mac systems behaved. + * + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR); + * This is the classic Jim Blinn approach and will work in academic + * environments where everything is done by the book. It has the shortcoming + * of assuming that input PNG data with no gamma information is linear - this + * is unlikely to be correct unless the PNG files where generated locally. + * Most of the time the output precision will be so low as to show + * significant banding in dark areas of the image. + * + * png_set_expand_16(pp); + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_DEFAULT_sRGB); + * This is a somewhat more realistic Jim Blinn inspired approach. PNG files + * are assumed to have the sRGB encoding if not marked with a gamma value and + * the output is always 16 bits per component. This permits accurate scaling + * and processing of the data. If you know that your input PNG files were + * generated locally you might need to replace PNG_DEFAULT_sRGB with the + * correct value for your system. + * + * png_set_alpha_mode(pp, PNG_ALPHA_OPTIMIZED, PNG_DEFAULT_sRGB); + * If you just need to composite the PNG image onto an existing background + * and if you control the code that does this you can use the optimization + * setting. In this case you just copy completely opaque pixels to the + * output. For pixels that are not completely transparent (you just skip + * those) you do the composition math using png_composite or png_composite_16 + * below then encode the resultant 8-bit or 16-bit values to match the output + * encoding. + * + * Other cases + * If neither the PNG nor the standard linear encoding work for you because + * of the software or hardware you use then you have a big problem. The PNG + * case will probably result in halos around the image. The linear encoding + * will probably result in a washed out, too bright, image (it's actually too + * contrasty.) Try the ALPHA_OPTIMIZED mode above - this will probably + * substantially reduce the halos. Alternatively try: + * + * png_set_alpha_mode(pp, PNG_ALPHA_BROKEN, PNG_DEFAULT_sRGB); + * This option will also reduce the halos, but there will be slight dark + * halos round the opaque parts of the image where the background is light. + * In the OPTIMIZED mode the halos will be light halos where the background + * is dark. Take your pick - the halos are unavoidable unless you can get + * your hardware/software fixed! (The OPTIMIZED approach is slightly + * faster.) + * + * When the default gamma of PNG files doesn't match the output gamma. + * If you have PNG files with no gamma information png_set_alpha_mode allows + * you to provide a default gamma, but it also sets the ouput gamma to the + * matching value. If you know your PNG files have a gamma that doesn't + * match the output you can take advantage of the fact that + * png_set_alpha_mode always sets the output gamma but only sets the PNG + * default if it is not already set: + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * The first call sets both the default and the output gamma values, the + * second call overrides the output gamma without changing the default. This + * is easier than achieving the same effect with png_set_gamma. You must use + * PNG_ALPHA_PNG for the first call - internal checking in png_set_alpha will + * fire if more than one call to png_set_alpha_mode and png_set_background is + * made in the same read operation, however multiple calls with PNG_ALPHA_PNG + * are ignored. + */ + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED +PNG_EXPORT(36, void, png_set_strip_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED) +PNG_EXPORT(37, void, png_set_swap_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED) +PNG_EXPORT(38, void, png_set_invert_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) +/* Add a filler byte to 8-bit Gray or 24-bit RGB images. */ +PNG_EXPORT(39, void, png_set_filler, (png_structrp png_ptr, png_uint_32 filler, + int flags)); +/* The values of the PNG_FILLER_ defines should NOT be changed */ +# define PNG_FILLER_BEFORE 0 +# define PNG_FILLER_AFTER 1 +/* Add an alpha byte to 8-bit Gray or 24-bit RGB images. */ +PNG_EXPORT(40, void, png_set_add_alpha, (png_structrp png_ptr, + png_uint_32 filler, int flags)); +#endif /* PNG_READ_FILLER_SUPPORTED || PNG_WRITE_FILLER_SUPPORTED */ + +#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) +/* Swap bytes in 16-bit depth files. */ +PNG_EXPORT(41, void, png_set_swap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED) +/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */ +PNG_EXPORT(42, void, png_set_packing, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \ + defined(PNG_WRITE_PACKSWAP_SUPPORTED) +/* Swap packing order of pixels in bytes. */ +PNG_EXPORT(43, void, png_set_packswap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) +/* Converts files to legal bit depths. */ +PNG_EXPORT(44, void, png_set_shift, (png_structrp png_ptr, png_const_color_8p + true_bits)); +#endif + +#if defined(PNG_READ_INTERLACING_SUPPORTED) || \ + defined(PNG_WRITE_INTERLACING_SUPPORTED) +/* Have the code handle the interlacing. Returns the number of passes. + * MUST be called before png_read_update_info or png_start_read_image, + * otherwise it will not have the desired effect. Note that it is still + * necessary to call png_read_row or png_read_rows png_get_image_height + * times for each pass. +*/ +PNG_EXPORT(45, int, png_set_interlace_handling, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) +/* Invert monochrome files */ +PNG_EXPORT(46, void, png_set_invert_mono, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +/* Handle alpha and tRNS by replacing with a background color. Prior to + * libpng-1.5.4 this API must not be called before the PNG file header has been + * read. Doing so will result in unexpected behavior and possible warnings or + * errors if the PNG file contains a bKGD chunk. + */ +PNG_FP_EXPORT(47, void, png_set_background, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, double background_gamma)) +PNG_FIXED_EXPORT(215, void, png_set_background_fixed, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, png_fixed_point background_gamma)) +#endif +#ifdef PNG_READ_BACKGROUND_SUPPORTED +# define PNG_BACKGROUND_GAMMA_UNKNOWN 0 +# define PNG_BACKGROUND_GAMMA_SCREEN 1 +# define PNG_BACKGROUND_GAMMA_FILE 2 +# define PNG_BACKGROUND_GAMMA_UNIQUE 3 +#endif + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED +/* Scale a 16-bit depth file down to 8-bit, accurately. */ +PNG_EXPORT(229, void, png_set_scale_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_16_TO_8 SUPPORTED /* Name prior to 1.5.4 */ +/* Strip the second byte of information from a 16-bit depth file. */ +PNG_EXPORT(48, void, png_set_strip_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +/* Turn on quantizing, and reduce the palette to the number of colors + * available. + */ +PNG_EXPORT(49, void, png_set_quantize, (png_structrp png_ptr, + png_colorp palette, int num_palette, int maximum_colors, + png_const_uint_16p histogram, int full_quantize)); +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* The threshold on gamma processing is configurable but hard-wired into the + * library. The following is the floating point variant. + */ +#define PNG_GAMMA_THRESHOLD (PNG_GAMMA_THRESHOLD_FIXED*.00001) + +/* Handle gamma correction. Screen_gamma=(display_exponent). + * NOTE: this API simply sets the screen and file gamma values. It will + * therefore override the value for gamma in a PNG file if it is called after + * the file header has been read - use with care - call before reading the PNG + * file for best results! + * + * These routines accept the same gamma values as png_set_alpha_mode (described + * above). The PNG_GAMMA_ defines and PNG_DEFAULT_sRGB can be passed to either + * API (floating point or fixed.) Notice, however, that the 'file_gamma' value + * is the inverse of a 'screen gamma' value. + */ +PNG_FP_EXPORT(50, void, png_set_gamma, (png_structrp png_ptr, + double screen_gamma, double override_file_gamma)) +PNG_FIXED_EXPORT(208, void, png_set_gamma_fixed, (png_structrp png_ptr, + png_fixed_point screen_gamma, png_fixed_point override_file_gamma)) +#endif + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +/* Set how many lines between output flushes - 0 for no flushing */ +PNG_EXPORT(51, void, png_set_flush, (png_structrp png_ptr, int nrows)); +/* Flush the current PNG output buffer */ +PNG_EXPORT(52, void, png_write_flush, (png_structrp png_ptr)); +#endif + +/* Optional update palette with requested transformations */ +PNG_EXPORT(53, void, png_start_read_image, (png_structrp png_ptr)); + +/* Optional call to update the users info structure */ +PNG_EXPORT(54, void, png_read_update_info, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read one or more rows of image data. */ +PNG_EXPORT(55, void, png_read_rows, (png_structrp png_ptr, png_bytepp row, + png_bytepp display_row, png_uint_32 num_rows)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read a row of data. */ +PNG_EXPORT(56, void, png_read_row, (png_structrp png_ptr, png_bytep row, + png_bytep display_row)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the whole image into memory at once. */ +PNG_EXPORT(57, void, png_read_image, (png_structrp png_ptr, png_bytepp image)); +#endif + +/* Write a row of image data */ +PNG_EXPORT(58, void, png_write_row, (png_structrp png_ptr, + png_const_bytep row)); + +/* Write a few rows of image data: (*row) is not written; however, the type + * is declared as writeable to maintain compatibility with previous versions + * of libpng and to allow the 'display_row' array from read_rows to be passed + * unchanged to write_rows. + */ +PNG_EXPORT(59, void, png_write_rows, (png_structrp png_ptr, png_bytepp row, + png_uint_32 num_rows)); + +/* Write the image data */ +PNG_EXPORT(60, void, png_write_image, (png_structrp png_ptr, png_bytepp image)); + +/* Write the end of the PNG file. */ +PNG_EXPORT(61, void, png_write_end, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the end of the PNG file. */ +PNG_EXPORT(62, void, png_read_end, (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +/* Free any memory associated with the png_info_struct */ +PNG_EXPORT(63, void, png_destroy_info_struct, (png_const_structrp png_ptr, + png_infopp info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(64, void, png_destroy_read_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(65, void, png_destroy_write_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr)); + +/* Set the libpng method of handling chunk CRC errors */ +PNG_EXPORT(66, void, png_set_crc_action, (png_structrp png_ptr, int crit_action, + int ancil_action)); + +/* Values for png_set_crc_action() say how to handle CRC errors in + * ancillary and critical chunks, and whether to use the data contained + * therein. Note that it is impossible to "discard" data in a critical + * chunk. For versions prior to 0.90, the action was always error/quit, + * whereas in version 0.90 and later, the action for CRC errors in ancillary + * chunks is warn/discard. These values should NOT be changed. + * + * value action:critical action:ancillary + */ +#define PNG_CRC_DEFAULT 0 /* error/quit warn/discard data */ +#define PNG_CRC_ERROR_QUIT 1 /* error/quit error/quit */ +#define PNG_CRC_WARN_DISCARD 2 /* (INVALID) warn/discard data */ +#define PNG_CRC_WARN_USE 3 /* warn/use data warn/use data */ +#define PNG_CRC_QUIET_USE 4 /* quiet/use data quiet/use data */ +#define PNG_CRC_NO_CHANGE 5 /* use current value use current value */ + +/* These functions give the user control over the scan-line filtering in + * libpng and the compression methods used by zlib. These functions are + * mainly useful for testing, as the defaults should work with most users. + * Those users who are tight on memory or want faster performance at the + * expense of compression can modify them. See the compression library + * header file (zlib.h) for an explination of the compression functions. + */ + +/* Set the filtering method(s) used by libpng. Currently, the only valid + * value for "method" is 0. + */ +PNG_EXPORT(67, void, png_set_filter, (png_structrp png_ptr, int method, + int filters)); + +/* Flags for png_set_filter() to say which filters to use. The flags + * are chosen so that they don't conflict with real filter types + * below, in case they are supplied instead of the #defined constants. + * These values should NOT be changed. + */ +#define PNG_NO_FILTERS 0x00 +#define PNG_FILTER_NONE 0x08 +#define PNG_FILTER_SUB 0x10 +#define PNG_FILTER_UP 0x20 +#define PNG_FILTER_AVG 0x40 +#define PNG_FILTER_PAETH 0x80 +#define PNG_ALL_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP | \ + PNG_FILTER_AVG | PNG_FILTER_PAETH) + +/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now. + * These defines should NOT be changed. + */ +#define PNG_FILTER_VALUE_NONE 0 +#define PNG_FILTER_VALUE_SUB 1 +#define PNG_FILTER_VALUE_UP 2 +#define PNG_FILTER_VALUE_AVG 3 +#define PNG_FILTER_VALUE_PAETH 4 +#define PNG_FILTER_VALUE_LAST 5 + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* EXPERIMENTAL */ +/* The "heuristic_method" is given by one of the PNG_FILTER_HEURISTIC_ + * defines, either the default (minimum-sum-of-absolute-differences), or + * the experimental method (weighted-minimum-sum-of-absolute-differences). + * + * Weights are factors >= 1.0, indicating how important it is to keep the + * filter type consistent between rows. Larger numbers mean the current + * filter is that many times as likely to be the same as the "num_weights" + * previous filters. This is cumulative for each previous row with a weight. + * There needs to be "num_weights" values in "filter_weights", or it can be + * NULL if the weights aren't being specified. Weights have no influence on + * the selection of the first row filter. Well chosen weights can (in theory) + * improve the compression for a given image. + * + * Costs are factors >= 1.0 indicating the relative decoding costs of a + * filter type. Higher costs indicate more decoding expense, and are + * therefore less likely to be selected over a filter with lower computational + * costs. There needs to be a value in "filter_costs" for each valid filter + * type (given by PNG_FILTER_VALUE_LAST), or it can be NULL if you aren't + * setting the costs. Costs try to improve the speed of decompression without + * unduly increasing the compressed image size. + * + * A negative weight or cost indicates the default value is to be used, and + * values in the range [0.0, 1.0) indicate the value is to remain unchanged. + * The default values for both weights and costs are currently 1.0, but may + * change if good general weighting/cost heuristics can be found. If both + * the weights and costs are set to 1.0, this degenerates the WEIGHTED method + * to the UNWEIGHTED method, but with added encoding time/computation. + */ +PNG_FP_EXPORT(68, void, png_set_filter_heuristics, (png_structrp png_ptr, + int heuristic_method, int num_weights, png_const_doublep filter_weights, + png_const_doublep filter_costs)) +PNG_FIXED_EXPORT(209, void, png_set_filter_heuristics_fixed, + (png_structrp png_ptr, int heuristic_method, int num_weights, + png_const_fixed_point_p filter_weights, + png_const_fixed_point_p filter_costs)) +#endif /* PNG_WRITE_WEIGHTED_FILTER_SUPPORTED */ + +/* Heuristic used for row filter selection. These defines should NOT be + * changed. + */ +#define PNG_FILTER_HEURISTIC_DEFAULT 0 /* Currently "UNWEIGHTED" */ +#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1 /* Used by libpng < 0.95 */ +#define PNG_FILTER_HEURISTIC_WEIGHTED 2 /* Experimental feature */ +#define PNG_FILTER_HEURISTIC_LAST 3 /* Not a valid value */ + +#ifdef PNG_WRITE_SUPPORTED +/* Set the library compression level. Currently, valid values range from + * 0 - 9, corresponding directly to the zlib compression levels 0 - 9 + * (0 - no compression, 9 - "maximal" compression). Note that tests have + * shown that zlib compression levels 3-6 usually perform as well as level 9 + * for PNG images, and do considerably fewer caclulations. In the future, + * these values may not correspond directly to the zlib compression levels. + */ +PNG_EXPORT(69, void, png_set_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(70, void, png_set_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(71, void, png_set_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(72, void, png_set_compression_window_bits, (png_structrp png_ptr, + int window_bits)); + +PNG_EXPORT(73, void, png_set_compression_method, (png_structrp png_ptr, + int method)); +#endif + +#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +/* Also set zlib parameters for compressing non-IDAT chunks */ +PNG_EXPORT(222, void, png_set_text_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(223, void, png_set_text_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(224, void, png_set_text_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(225, void, png_set_text_compression_window_bits, + (png_structrp png_ptr, int window_bits)); + +PNG_EXPORT(226, void, png_set_text_compression_method, (png_structrp png_ptr, + int method)); +#endif /* PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED */ + +/* These next functions are called for input/output, memory, and error + * handling. They are in the file pngrio.c, pngwio.c, and pngerror.c, + * and call standard C I/O routines such as fread(), fwrite(), and + * fprintf(). These functions can be made to use other I/O routines + * at run time for those applications that need to handle I/O in a + * different manner by calling png_set_???_fn(). See libpng-manual.txt for + * more information. + */ + +#ifdef PNG_STDIO_SUPPORTED +/* Initialize the input/output for the PNG file to the default functions. */ +PNG_EXPORT(74, void, png_init_io, (png_structrp png_ptr, png_FILE_p fp)); +#endif + +/* Replace the (error and abort), and warning functions with user + * supplied functions. If no messages are to be printed you must still + * write and use replacement functions. The replacement error_fn should + * still do a longjmp to the last setjmp location if you are using this + * method of error handling. If error_fn or warning_fn is NULL, the + * default function will be used. + */ + +PNG_EXPORT(75, void, png_set_error_fn, (png_structrp png_ptr, + png_voidp error_ptr, png_error_ptr error_fn, png_error_ptr warning_fn)); + +/* Return the user pointer associated with the error functions */ +PNG_EXPORT(76, png_voidp, png_get_error_ptr, (png_const_structrp png_ptr)); + +/* Replace the default data output functions with a user supplied one(s). + * If buffered output is not used, then output_flush_fn can be set to NULL. + * If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time + * output_flush_fn will be ignored (and thus can be NULL). + * It is probably a mistake to use NULL for output_flush_fn if + * write_data_fn is not also NULL unless you have built libpng with + * PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's + * default flush function, which uses the standard *FILE structure, will + * be used. + */ +PNG_EXPORT(77, void, png_set_write_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn)); + +/* Replace the default data input function with a user supplied one. */ +PNG_EXPORT(78, void, png_set_read_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr read_data_fn)); + +/* Return the user pointer associated with the I/O functions */ +PNG_EXPORT(79, png_voidp, png_get_io_ptr, (png_const_structrp png_ptr)); + +PNG_EXPORT(80, void, png_set_read_status_fn, (png_structrp png_ptr, + png_read_status_ptr read_row_fn)); + +PNG_EXPORT(81, void, png_set_write_status_fn, (png_structrp png_ptr, + png_write_status_ptr write_row_fn)); + +#ifdef PNG_USER_MEM_SUPPORTED +/* Replace the default memory allocation functions with user supplied one(s). */ +PNG_EXPORT(82, void, png_set_mem_fn, (png_structrp png_ptr, png_voidp mem_ptr, + png_malloc_ptr malloc_fn, png_free_ptr free_fn)); +/* Return the user pointer associated with the memory functions */ +PNG_EXPORT(83, png_voidp, png_get_mem_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(84, void, png_set_read_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr read_user_transform_fn)); +#endif + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(85, void, png_set_write_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr write_user_transform_fn)); +#endif + +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED +PNG_EXPORT(86, void, png_set_user_transform_info, (png_structrp png_ptr, + png_voidp user_transform_ptr, int user_transform_depth, + int user_transform_channels)); +/* Return the user pointer associated with the user transform functions */ +PNG_EXPORT(87, png_voidp, png_get_user_transform_ptr, + (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED +/* Return information about the row currently being processed. Note that these + * APIs do not fail but will return unexpected results if called outside a user + * transform callback. Also note that when transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +PNG_EXPORT(217, png_uint_32, png_get_current_row_number, (png_const_structrp)); +PNG_EXPORT(218, png_byte, png_get_current_pass_number, (png_const_structrp)); +#endif + +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED +/* This callback is called only for *unknown* chunks. If + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED is set then it is possible to set known + * chunks to be treated as unknown, however in this case the callback must do + * any processing required by the chunk (e.g. by calling the appropriate + * png_set_ APIs.) + * + * There is no write support - on write, by default, all the chunks in the + * 'unknown' list are written in the specified position. + * + * The integer return from the callback function is interpreted thus: + * + * negative: An error occured, png_chunk_error will be called. + * zero: The chunk was not handled, the chunk will be saved. A critical + * chunk will cause an error at this point unless it is to be saved. + * positive: The chunk was handled, libpng will ignore/discard it. + * + * See "INTERACTION WTIH USER CHUNK CALLBACKS" below for important notes about + * how this behavior will change in libpng 1.7 + */ +PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structrp png_ptr, + png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +PNG_EXPORT(89, png_voidp, png_get_user_chunk_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +/* Sets the function callbacks for the push reader, and a pointer to a + * user-defined structure available to the callback functions. + */ +PNG_EXPORT(90, void, png_set_progressive_read_fn, (png_structrp png_ptr, + png_voidp progressive_ptr, png_progressive_info_ptr info_fn, + png_progressive_row_ptr row_fn, png_progressive_end_ptr end_fn)); + +/* Returns the user pointer associated with the push read functions */ +PNG_EXPORT(91, png_voidp, png_get_progressive_ptr, + (png_const_structrp png_ptr)); + +/* Function to be called when data becomes available */ +PNG_EXPORT(92, void, png_process_data, (png_structrp png_ptr, + png_inforp info_ptr, png_bytep buffer, png_size_t buffer_size)); + +/* A function which may be called *only* within png_process_data to stop the + * processing of any more data. The function returns the number of bytes + * remaining, excluding any that libpng has cached internally. A subsequent + * call to png_process_data must supply these bytes again. If the argument + * 'save' is set to true the routine will first save all the pending data and + * will always return 0. + */ +PNG_EXPORT(219, png_size_t, png_process_data_pause, (png_structrp, int save)); + +/* A function which may be called *only* outside (after) a call to + * png_process_data. It returns the number of bytes of data to skip in the + * input. Normally it will return 0, but if it returns a non-zero value the + * application must skip than number of bytes of input data and pass the + * following data to the next call to png_process_data. + */ +PNG_EXPORT(220, png_uint_32, png_process_data_skip, (png_structrp)); + +#ifdef PNG_READ_INTERLACING_SUPPORTED +/* Function that combines rows. 'new_row' is a flag that should come from + * the callback and be non-NULL if anything needs to be done; the library + * stores its own version of the new data internally and ignores the passed + * in value. + */ +PNG_EXPORT(93, void, png_progressive_combine_row, (png_const_structrp png_ptr, + png_bytep old_row, png_const_bytep new_row)); +#endif /* PNG_READ_INTERLACING_SUPPORTED */ +#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */ + +PNG_EXPORTA(94, png_voidp, png_malloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); +/* Added at libpng version 1.4.0 */ +PNG_EXPORTA(95, png_voidp, png_calloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Added at libpng version 1.2.4 */ +PNG_EXPORTA(96, png_voidp, png_malloc_warn, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Frees a pointer allocated by png_malloc() */ +PNG_EXPORT(97, void, png_free, (png_const_structrp png_ptr, png_voidp ptr)); + +/* Free data that was allocated internally */ +PNG_EXPORT(98, void, png_free_data, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 free_me, int num)); + +/* Reassign responsibility for freeing existing data, whether allocated + * by libpng or by the application; this works on the png_info structure passed + * in, it does not change the state for other png_info structures. + * + * It is unlikely that this function works correctly as of 1.6.0 and using it + * may result either in memory leaks or double free of allocated data. + */ +PNG_EXPORTA(99, void, png_data_freer, (png_const_structrp png_ptr, + png_inforp info_ptr, int freer, png_uint_32 mask), PNG_DEPRECATED); + +/* Assignments for png_data_freer */ +#define PNG_DESTROY_WILL_FREE_DATA 1 +#define PNG_SET_WILL_FREE_DATA 1 +#define PNG_USER_WILL_FREE_DATA 2 +/* Flags for png_ptr->free_me and info_ptr->free_me */ +#define PNG_FREE_HIST 0x0008 +#define PNG_FREE_ICCP 0x0010 +#define PNG_FREE_SPLT 0x0020 +#define PNG_FREE_ROWS 0x0040 +#define PNG_FREE_PCAL 0x0080 +#define PNG_FREE_SCAL 0x0100 +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +# define PNG_FREE_UNKN 0x0200 +#endif +/* PNG_FREE_LIST 0x0400 removed in 1.6.0 because it is ignored */ +#define PNG_FREE_PLTE 0x1000 +#define PNG_FREE_TRNS 0x2000 +#define PNG_FREE_TEXT 0x4000 +#define PNG_FREE_ALL 0x7fff +#define PNG_FREE_MUL 0x4220 /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */ + +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(100, png_voidp, png_malloc_default, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED PNG_DEPRECATED); +PNG_EXPORTA(101, void, png_free_default, (png_const_structrp png_ptr, + png_voidp ptr), PNG_DEPRECATED); +#endif + +#ifdef PNG_ERROR_TEXT_SUPPORTED +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(102, void, png_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +/* The same, but the chunk name is prepended to the error string. */ +PNG_EXPORTA(103, void, png_chunk_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +#else +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(104, void, png_err, (png_const_structrp png_ptr), PNG_NORETURN); +#endif + +#ifdef PNG_WARNINGS_SUPPORTED +/* Non-fatal error in libpng. Can continue, but may have a problem. */ +PNG_EXPORT(105, void, png_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +/* Non-fatal error in libpng, chunk name is prepended to message. */ +PNG_EXPORT(106, void, png_chunk_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#endif + +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +/* Benign error in libpng. Can continue, but may have a problem. + * User can choose whether to handle as a fatal error or as a warning. */ +PNG_EXPORT(107, void, png_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +#ifdef PNG_READ_SUPPORTED +/* Same, chunk name is prepended to message (only during read) */ +PNG_EXPORT(108, void, png_chunk_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#endif + +PNG_EXPORT(109, void, png_set_benign_errors, + (png_structrp png_ptr, int allowed)); +#else +# ifdef PNG_ALLOW_BENIGN_ERRORS +# define png_benign_error png_warning +# define png_chunk_benign_error png_chunk_warning +# else +# define png_benign_error png_error +# define png_chunk_benign_error png_chunk_error +# endif +#endif + +/* The png_set_ functions are for storing values in the png_info_struct. + * Similarly, the png_get_ calls are used to read values from the + * png_info_struct, either storing the parameters in the passed variables, or + * setting pointers into the png_info_struct where the data is stored. The + * png_get_ functions return a non-zero value if the data was available + * in info_ptr, or return zero and do not change any of the parameters if the + * data was not available. + * + * These functions should be used instead of directly accessing png_info + * to avoid problems with future changes in the size and internal layout of + * png_info_struct. + */ +/* Returns "flag" if chunk data is valid in info_ptr. */ +PNG_EXPORT(110, png_uint_32, png_get_valid, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 flag)); + +/* Returns number of bytes needed to hold a transformed row. */ +PNG_EXPORT(111, png_size_t, png_get_rowbytes, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* Returns row_pointers, which is an array of pointers to scanlines that was + * returned from png_read_png(). + */ +PNG_EXPORT(112, png_bytepp, png_get_rows, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Set row_pointers, which is an array of pointers to scanlines for use + * by png_write_png(). + */ +PNG_EXPORT(113, void, png_set_rows, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytepp row_pointers)); +#endif + +/* Returns number of color channels in image. */ +PNG_EXPORT(114, png_byte, png_get_channels, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_EASY_ACCESS_SUPPORTED +/* Returns image width in pixels. */ +PNG_EXPORT(115, png_uint_32, png_get_image_width, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image height in pixels. */ +PNG_EXPORT(116, png_uint_32, png_get_image_height, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image bit_depth. */ +PNG_EXPORT(117, png_byte, png_get_bit_depth, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image color_type. */ +PNG_EXPORT(118, png_byte, png_get_color_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image filter_type. */ +PNG_EXPORT(119, png_byte, png_get_filter_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image interlace_type. */ +PNG_EXPORT(120, png_byte, png_get_interlace_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image compression_type. */ +PNG_EXPORT(121, png_byte, png_get_compression_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image resolution in pixels per meter, from pHYs chunk data. */ +PNG_EXPORT(122, png_uint_32, png_get_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(123, png_uint_32, png_get_x_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(124, png_uint_32, png_get_y_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +/* Returns pixel aspect ratio, computed from pHYs chunk data. */ +PNG_FP_EXPORT(125, float, png_get_pixel_aspect_ratio, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +PNG_FIXED_EXPORT(210, png_fixed_point, png_get_pixel_aspect_ratio_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) + +/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */ +PNG_EXPORT(126, png_int_32, png_get_x_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(127, png_int_32, png_get_y_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(128, png_int_32, png_get_x_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(129, png_int_32, png_get_y_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +#endif /* PNG_EASY_ACCESS_SUPPORTED */ + +#ifdef PNG_READ_SUPPORTED +/* Returns pointer to signature string read from PNG header */ +PNG_EXPORT(130, png_const_bytep, png_get_signature, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(131, png_uint_32, png_get_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_16p *background)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(132, void, png_set_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_16p background)); +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(133, png_uint_32, png_get_cHRM, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *white_x, double *white_y, double *red_x, + double *red_y, double *green_x, double *green_y, double *blue_x, + double *blue_y)) +PNG_FP_EXPORT(230, png_uint_32, png_get_cHRM_XYZ, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *red_X, double *red_Y, double *red_Z, + double *green_X, double *green_Y, double *green_Z, double *blue_X, + double *blue_Y, double *blue_Z)) +PNG_FIXED_EXPORT(134, png_uint_32, png_get_cHRM_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_white_x, png_fixed_point *int_white_y, + png_fixed_point *int_red_x, png_fixed_point *int_red_y, + png_fixed_point *int_green_x, png_fixed_point *int_green_y, + png_fixed_point *int_blue_x, png_fixed_point *int_blue_y)) +PNG_FIXED_EXPORT(231, png_uint_32, png_get_cHRM_XYZ_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_red_X, png_fixed_point *int_red_Y, + png_fixed_point *int_red_Z, png_fixed_point *int_green_X, + png_fixed_point *int_green_Y, png_fixed_point *int_green_Z, + png_fixed_point *int_blue_X, png_fixed_point *int_blue_Y, + png_fixed_point *int_blue_Z)) +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(135, void, png_set_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y)) +PNG_FP_EXPORT(232, void, png_set_cHRM_XYZ, (png_const_structrp png_ptr, + png_inforp info_ptr, double red_X, double red_Y, double red_Z, + double green_X, double green_Y, double green_Z, double blue_X, + double blue_Y, double blue_Z)) +PNG_FIXED_EXPORT(136, void, png_set_cHRM_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_white_x, + png_fixed_point int_white_y, png_fixed_point int_red_x, + png_fixed_point int_red_y, png_fixed_point int_green_x, + png_fixed_point int_green_y, png_fixed_point int_blue_x, + png_fixed_point int_blue_y)) +PNG_FIXED_EXPORT(233, void, png_set_cHRM_XYZ_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_red_X, png_fixed_point int_red_Y, + png_fixed_point int_red_Z, png_fixed_point int_green_X, + png_fixed_point int_green_Y, png_fixed_point int_green_Z, + png_fixed_point int_blue_X, png_fixed_point int_blue_Y, + png_fixed_point int_blue_Z)) +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(137, png_uint_32, png_get_gAMA, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *file_gamma)) +PNG_FIXED_EXPORT(138, png_uint_32, png_get_gAMA_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_file_gamma)) +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(139, void, png_set_gAMA, (png_const_structrp png_ptr, + png_inforp info_ptr, double file_gamma)) +PNG_FIXED_EXPORT(140, void, png_set_gAMA_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_file_gamma)) +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(141, png_uint_32, png_get_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_16p *hist)); +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(142, void, png_set_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_uint_16p hist)); +#endif + +PNG_EXPORT(143, png_uint_32, png_get_IHDR, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *width, png_uint_32 *height, + int *bit_depth, int *color_type, int *interlace_method, + int *compression_method, int *filter_method)); + +PNG_EXPORT(144, void, png_set_IHDR, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 width, png_uint_32 height, int bit_depth, + int color_type, int interlace_method, int compression_method, + int filter_method)); + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(145, png_uint_32, png_get_oFFs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_int_32 *offset_x, png_int_32 *offset_y, + int *unit_type)); +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(146, void, png_set_oFFs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_int_32 offset_x, png_int_32 offset_y, + int unit_type)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(147, png_uint_32, png_get_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charp *purpose, png_int_32 *X0, + png_int_32 *X1, int *type, int *nparams, png_charp *units, + png_charpp *params)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(148, void, png_set_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp purpose, png_int_32 X0, png_int_32 X1, + int type, int nparams, png_const_charp units, png_charpp params)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(149, png_uint_32, png_get_pHYs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(150, void, png_set_pHYs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 res_x, png_uint_32 res_y, int unit_type)); +#endif + +PNG_EXPORT(151, png_uint_32, png_get_PLTE, (png_const_structrp png_ptr, + png_inforp info_ptr, png_colorp *palette, int *num_palette)); + +PNG_EXPORT(152, void, png_set_PLTE, (png_structrp png_ptr, + png_inforp info_ptr, png_const_colorp palette, int num_palette)); + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(153, png_uint_32, png_get_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_8p *sig_bit)); +#endif + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(154, void, png_set_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_8p sig_bit)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(155, png_uint_32, png_get_sRGB, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *file_srgb_intent)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(156, void, png_set_sRGB, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +PNG_EXPORT(157, void, png_set_sRGB_gAMA_and_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(158, png_uint_32, png_get_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charpp name, int *compression_type, + png_bytepp profile, png_uint_32 *proflen)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(159, void, png_set_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp name, int compression_type, + png_const_bytep profile, png_uint_32 proflen)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(160, int, png_get_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_sPLT_tpp entries)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(161, void, png_set_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_sPLT_tp entries, int nentries)); +#endif + +#ifdef PNG_TEXT_SUPPORTED +/* png_get_text also returns the number of text chunks in *num_text */ +PNG_EXPORT(162, int, png_get_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_textp *text_ptr, int *num_text)); +#endif + +/* Note while png_set_text() will accept a structure whose text, + * language, and translated keywords are NULL pointers, the structure + * returned by png_get_text will always contain regular + * zero-terminated C strings. They might be empty strings but + * they will never be NULL pointers. + */ + +#ifdef PNG_TEXT_SUPPORTED +PNG_EXPORT(163, void, png_set_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_textp text_ptr, int num_text)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(164, png_uint_32, png_get_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_timep *mod_time)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(165, void, png_set_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_timep mod_time)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(166, png_uint_32, png_get_tRNS, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep *trans_alpha, int *num_trans, + png_color_16p *trans_color)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(167, void, png_set_tRNS, (png_structrp png_ptr, + png_inforp info_ptr, png_const_bytep trans_alpha, int num_trans, + png_const_color_16p trans_color)); +#endif + +#ifdef PNG_sCAL_SUPPORTED +PNG_FP_EXPORT(168, png_uint_32, png_get_sCAL, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *unit, double *width, double *height)) +#if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || \ + defined(PNG_FLOATING_POINT_SUPPORTED) +/* NOTE: this API is currently implemented using floating point arithmetic, + * consequently it can only be used on systems with floating point support. + * In any case the range of values supported by png_fixed_point is small and it + * is highly recommended that png_get_sCAL_s be used instead. + */ +PNG_FIXED_EXPORT(214, png_uint_32, png_get_sCAL_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_fixed_point *width, png_fixed_point *height)) +#endif +PNG_EXPORT(169, png_uint_32, png_get_sCAL_s, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_charpp swidth, png_charpp sheight)); + +PNG_FP_EXPORT(170, void, png_set_sCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, double width, double height)) +PNG_FIXED_EXPORT(213, void, png_set_sCAL_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, png_fixed_point width, + png_fixed_point height)) +PNG_EXPORT(171, void, png_set_sCAL_s, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, + png_const_charp swidth, png_const_charp sheight)); +#endif /* PNG_sCAL_SUPPORTED */ + +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +/* Provide the default handling for all unknown chunks or, optionally, for + * specific unknown chunks. + * + * NOTE: prior to 1.6.0 the handling specified for particular chunks on read was + * ignored and the default was used, the per-chunk setting only had an effect on + * write. If you wish to have chunk-specific handling on read in code that must + * work on earlier versions you must use a user chunk callback to specify the + * desired handling (keep or discard.) + * + * The 'keep' parameter is a PNG_HANDLE_CHUNK_ value as listed below. The + * parameter is interpreted as follows: + * + * READ: + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Known chunks: do normal libpng processing, do not keep the chunk (but + * see the comments below about PNG_HANDLE_AS_UNKNOWN_SUPPORTED) + * Unknown chunks: for a specific chunk use the global default, when used + * as the default discard the chunk data. + * PNG_HANDLE_CHUNK_NEVER: + * Discard the chunk data. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Keep the chunk data if the chunk is not critical else raise a chunk + * error. + * PNG_HANDLE_CHUNK_ALWAYS: + * Keep the chunk data. + * + * If the chunk data is saved it can be retrieved using png_get_unknown_chunks, + * below. Notice that specifying "AS_DEFAULT" as a global default is equivalent + * to specifying "NEVER", however when "AS_DEFAULT" is used for specific chunks + * it simply resets the behavior to the libpng default. + * + * INTERACTION WTIH USER CHUNK CALLBACKS: + * The per-chunk handling is always used when there is a png_user_chunk_ptr + * callback and the callback returns 0; the chunk is then always stored *unless* + * it is critical and the per-chunk setting is other than ALWAYS. Notice that + * the global default is *not* used in this case. (In effect the per-chunk + * value is incremented to at least IF_SAFE.) + * + * IMPORTANT NOTE: this behavior will change in libpng 1.7 - the global and + * per-chunk defaults will be honored. If you want to preserve the current + * behavior when your callback returns 0 you must set PNG_HANDLE_CHUNK_IF_SAFE + * as the default - if you don't do this libpng 1.6 will issue a warning. + * + * If you want unhandled unknown chunks to be discarded in libpng 1.6 and + * earlier simply return '1' (handled). + * + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED: + * If this is *not* set known chunks will always be handled by libpng and + * will never be stored in the unknown chunk list. Known chunks listed to + * png_set_keep_unknown_chunks will have no effect. If it is set then known + * chunks listed with a keep other than AS_DEFAULT will *never* be processed + * by libpng, in addition critical chunks must either be processed by the + * callback or saved. + * + * The IHDR and IEND chunks must not be listed. Because this turns off the + * default handling for chunks that would otherwise be recognized the + * behavior of libpng transformations may well become incorrect! + * + * WRITE: + * When writing chunks the options only apply to the chunks specified by + * png_set_unknown_chunks (below), libpng will *always* write known chunks + * required by png_set_ calls and will always write the core critical chunks + * (as required for PLTE). + * + * Each chunk in the png_set_unknown_chunks list is looked up in the + * png_set_keep_unknown_chunks list to find the keep setting, this is then + * interpreted as follows: + * + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Write safe-to-copy chunks and write other chunks if the global + * default is set to _ALWAYS, otherwise don't write this chunk. + * PNG_HANDLE_CHUNK_NEVER: + * Do not write the chunk. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Write the chunk if it is safe-to-copy, otherwise do not write it. + * PNG_HANDLE_CHUNK_ALWAYS: + * Write the chunk. + * + * Note that the default behavior is effectively the opposite of the read case - + * in read unknown chunks are not stored by default, in write they are written + * by default. Also the behavior of PNG_HANDLE_CHUNK_IF_SAFE is very different + * - on write the safe-to-copy bit is checked, on read the critical bit is + * checked and on read if the chunk is critical an error will be raised. + * + * num_chunks: + * =========== + * If num_chunks is positive, then the "keep" parameter specifies the manner + * for handling only those chunks appearing in the chunk_list array, + * otherwise the chunk list array is ignored. + * + * If num_chunks is 0 the "keep" parameter specifies the default behavior for + * unknown chunks, as described above. + * + * If num_chunks is negative, then the "keep" parameter specifies the manner + * for handling all unknown chunks plus all chunks recognized by libpng + * except for the IHDR, PLTE, tRNS, IDAT, and IEND chunks (which continue to + * be processed by libpng. + */ +PNG_EXPORT(172, void, png_set_keep_unknown_chunks, (png_structrp png_ptr, + int keep, png_const_bytep chunk_list, int num_chunks)); + +/* The "keep" PNG_HANDLE_CHUNK_ parameter for the specified chunk is returned; + * the result is therefore true (non-zero) if special handling is required, + * false for the default handling. + */ +PNG_EXPORT(173, int, png_handle_as_unknown, (png_const_structrp png_ptr, + png_const_bytep chunk_name)); +#endif + +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +PNG_EXPORT(174, void, png_set_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_unknown_chunkp unknowns, + int num_unknowns)); + /* NOTE: prior to 1.6.0 this routine set the 'location' field of the added + * unknowns to the location currently stored in the png_struct. This is + * invariably the wrong value on write. To fix this call the following API + * for each chunk in the list with the correct location. If you know your + * code won't be compiled on earlier versions you can rely on + * png_set_unknown_chunks(write-ptr, png_get_unknown_chunks(read-ptr)) doing + * the correct thing. + */ + +PNG_EXPORT(175, void, png_set_unknown_chunk_location, + (png_const_structrp png_ptr, png_inforp info_ptr, int chunk, int location)); + +PNG_EXPORT(176, int, png_get_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_unknown_chunkpp entries)); +#endif + +/* Png_free_data() will turn off the "valid" flag for anything it frees. + * If you need to turn it off for a chunk that your application has freed, + * you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK); + */ +PNG_EXPORT(177, void, png_set_invalid, (png_const_structrp png_ptr, + png_inforp info_ptr, int mask)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* The "params" pointer is currently not used and is for future expansion. */ +PNG_EXPORT(178, void, png_read_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +PNG_EXPORT(179, void, png_write_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +#endif + +PNG_EXPORT(180, png_const_charp, png_get_copyright, + (png_const_structrp png_ptr)); +PNG_EXPORT(181, png_const_charp, png_get_header_ver, + (png_const_structrp png_ptr)); +PNG_EXPORT(182, png_const_charp, png_get_header_version, + (png_const_structrp png_ptr)); +PNG_EXPORT(183, png_const_charp, png_get_libpng_ver, + (png_const_structrp png_ptr)); + +#ifdef PNG_MNG_FEATURES_SUPPORTED +PNG_EXPORT(184, png_uint_32, png_permit_mng_features, (png_structrp png_ptr, + png_uint_32 mng_features_permitted)); +#endif + +/* For use in png_set_keep_unknown, added to version 1.2.6 */ +#define PNG_HANDLE_CHUNK_AS_DEFAULT 0 +#define PNG_HANDLE_CHUNK_NEVER 1 +#define PNG_HANDLE_CHUNK_IF_SAFE 2 +#define PNG_HANDLE_CHUNK_ALWAYS 3 +#define PNG_HANDLE_CHUNK_LAST 4 + +/* Strip the prepended error numbers ("#nnn ") from error and warning + * messages before passing them to the error or warning handler. + */ +#ifdef PNG_ERROR_NUMBERS_SUPPORTED +PNG_EXPORT(185, void, png_set_strip_error_numbers, (png_structrp png_ptr, + png_uint_32 strip_mode)); +#endif + +/* Added in libpng-1.2.6 */ +#ifdef PNG_SET_USER_LIMITS_SUPPORTED +PNG_EXPORT(186, void, png_set_user_limits, (png_structrp png_ptr, + png_uint_32 user_width_max, png_uint_32 user_height_max)); +PNG_EXPORT(187, png_uint_32, png_get_user_width_max, + (png_const_structrp png_ptr)); +PNG_EXPORT(188, png_uint_32, png_get_user_height_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.0 */ +PNG_EXPORT(189, void, png_set_chunk_cache_max, (png_structrp png_ptr, + png_uint_32 user_chunk_cache_max)); +PNG_EXPORT(190, png_uint_32, png_get_chunk_cache_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.1 */ +PNG_EXPORT(191, void, png_set_chunk_malloc_max, (png_structrp png_ptr, + png_alloc_size_t user_chunk_cache_max)); +PNG_EXPORT(192, png_alloc_size_t, png_get_chunk_malloc_max, + (png_const_structrp png_ptr)); +#endif + +#if defined(PNG_INCH_CONVERSIONS_SUPPORTED) +PNG_EXPORT(193, png_uint_32, png_get_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(194, png_uint_32, png_get_x_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(195, png_uint_32, png_get_y_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_FP_EXPORT(196, float, png_get_x_offset_inches, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(211, png_fixed_point, png_get_x_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +PNG_FP_EXPORT(197, float, png_get_y_offset_inches, (png_const_structrp png_ptr, + png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(212, png_fixed_point, png_get_y_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +# ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(198, png_uint_32, png_get_pHYs_dpi, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +# endif /* PNG_pHYs_SUPPORTED */ +#endif /* PNG_INCH_CONVERSIONS_SUPPORTED */ + +/* Added in libpng-1.4.0 */ +#ifdef PNG_IO_STATE_SUPPORTED +PNG_EXPORT(199, png_uint_32, png_get_io_state, (png_const_structrp png_ptr)); + +/* Removed from libpng 1.6; use png_get_io_chunk_type. */ +PNG_REMOVED(200, png_const_bytep, png_get_io_chunk_name, (png_structrp png_ptr), + PNG_DEPRECATED) + +PNG_EXPORT(216, png_uint_32, png_get_io_chunk_type, + (png_const_structrp png_ptr)); + +/* The flags returned by png_get_io_state() are the following: */ +# define PNG_IO_NONE 0x0000 /* no I/O at this moment */ +# define PNG_IO_READING 0x0001 /* currently reading */ +# define PNG_IO_WRITING 0x0002 /* currently writing */ +# define PNG_IO_SIGNATURE 0x0010 /* currently at the file signature */ +# define PNG_IO_CHUNK_HDR 0x0020 /* currently at the chunk header */ +# define PNG_IO_CHUNK_DATA 0x0040 /* currently at the chunk data */ +# define PNG_IO_CHUNK_CRC 0x0080 /* currently at the chunk crc */ +# define PNG_IO_MASK_OP 0x000f /* current operation: reading/writing */ +# define PNG_IO_MASK_LOC 0x00f0 /* current location: sig/hdr/data/crc */ +#endif /* ?PNG_IO_STATE_SUPPORTED */ + +/* Interlace support. The following macros are always defined so that if + * libpng interlace handling is turned off the macros may be used to handle + * interlaced images within the application. + */ +#define PNG_INTERLACE_ADAM7_PASSES 7 + +/* Two macros to return the first row and first column of the original, + * full, image which appears in a given pass. 'pass' is in the range 0 + * to 6 and the result is in the range 0 to 7. + */ +#define PNG_PASS_START_ROW(pass) (((1&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1& (pass))<<(3-(((pass)+1)>>1)))&7) + +/* A macro to return the offset between pixels in the output row for a pair of + * pixels in the input - effectively the inverse of the 'COL_SHIFT' macro that + * follows. Note that ROW_OFFSET is the offset from one row to the next whereas + * COL_OFFSET is from one column to the next, within a row. + */ +#define PNG_PASS_ROW_OFFSET(pass) ((pass)>2?(8>>(((pass)-1)>>1)):8) +#define PNG_PASS_COL_OFFSET(pass) (1<<((7-(pass))>>1)) + +/* Two macros to help evaluate the number of rows or columns in each + * pass. This is expressed as a shift - effectively log2 of the number or + * rows or columns in each 8x8 tile of the original image. + */ +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) + +/* Hence two macros to determine the number of rows or columns in a given + * pass of an image given its height or width. In fact these macros may + * return non-zero even though the sub-image is empty, because the other + * dimension may be empty for a small image. + */ +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) + +/* For the reader row callbacks (both progressive and sequential) it is + * necessary to find the row in the output image given a row in an interlaced + * image, so two more macros: + */ +#define PNG_ROW_FROM_PASS_ROW(y_in, pass) \ + (((y_in)<>(((7-(off))-(pass))<<2)) & 0xF) | \ + ((0x01145AF0>>(((7-(off))-(pass))<<2)) & 0xF0)) + +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED +/* With these routines we avoid an integer divide, which will be slower on + * most machines. However, it does take more operations than the corresponding + * divide method, so it may be slower on a few RISC systems. There are two + * shifts (by 8 or 16 bits) and an addition, versus a single integer divide. + * + * Note that the rounding factors are NOT supposed to be the same! 128 and + * 32768 are correct for the NODIV code; 127 and 32767 are correct for the + * standard method. + * + * [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ] + */ + + /* fg and bg should be in `gamma 1.0' space; alpha is the opacity */ + +# define png_composite(composite, fg, alpha, bg) \ + { png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) \ + * (png_uint_16)(alpha) \ + + (png_uint_16)(bg)*(png_uint_16)(255 \ + - (png_uint_16)(alpha)) + 128); \ + (composite) = (png_byte)((temp + (temp >> 8)) >> 8); } + +# define png_composite_16(composite, fg, alpha, bg) \ + { png_uint_32 temp = (png_uint_32)((png_uint_32)(fg) \ + * (png_uint_32)(alpha) \ + + (png_uint_32)(bg)*(65535 \ + - (png_uint_32)(alpha)) + 32768); \ + (composite) = (png_uint_16)((temp + (temp >> 16)) >> 16); } + +#else /* Standard method using integer division */ + +# define png_composite(composite, fg, alpha, bg) \ + (composite) = (png_byte)(((png_uint_16)(fg) * (png_uint_16)(alpha) + \ + (png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) + \ + 127) / 255) + +# define png_composite_16(composite, fg, alpha, bg) \ + (composite) = (png_uint_16)(((png_uint_32)(fg) * (png_uint_32)(alpha) + \ + (png_uint_32)(bg)*(png_uint_32)(65535 - (png_uint_32)(alpha)) + \ + 32767) / 65535) +#endif /* PNG_READ_COMPOSITE_NODIV_SUPPORTED */ + +#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(201, png_uint_32, png_get_uint_32, (png_const_bytep buf)); +PNG_EXPORT(202, png_uint_16, png_get_uint_16, (png_const_bytep buf)); +PNG_EXPORT(203, png_int_32, png_get_int_32, (png_const_bytep buf)); +#endif + +PNG_EXPORT(204, png_uint_32, png_get_uint_31, (png_const_structrp png_ptr, + png_const_bytep buf)); +/* No png_get_int_16 -- may be added if there's a real need for it. */ + +/* Place a 32-bit number into a buffer in PNG byte order (big-endian). */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(205, void, png_save_uint_32, (png_bytep buf, png_uint_32 i)); +#endif +#ifdef PNG_SAVE_INT_32_SUPPORTED +PNG_EXPORT(206, void, png_save_int_32, (png_bytep buf, png_int_32 i)); +#endif + +/* Place a 16-bit number into a buffer in PNG byte order. + * The parameter is declared unsigned int, not png_uint_16, + * just to avoid potential problems on pre-ANSI C compilers. + */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(207, void, png_save_uint_16, (png_bytep buf, unsigned int i)); +/* No png_save_int_16 -- may be added if there's a real need for it. */ +#endif + +#ifdef PNG_USE_READ_MACROS +/* Inline macros to do direct reads of bytes from the input buffer. + * The png_get_int_32() routine assumes we are using two's complement + * format for negative values, which is almost certainly true. + */ +# define PNG_get_uint_32(buf) \ + (((png_uint_32)(*(buf)) << 24) + \ + ((png_uint_32)(*((buf) + 1)) << 16) + \ + ((png_uint_32)(*((buf) + 2)) << 8) + \ + ((png_uint_32)(*((buf) + 3)))) + + /* From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the + * function) incorrectly returned a value of type png_uint_32. + */ +# define PNG_get_uint_16(buf) \ + ((png_uint_16) \ + (((unsigned int)(*(buf)) << 8) + \ + ((unsigned int)(*((buf) + 1))))) + +# define PNG_get_int_32(buf) \ + ((png_int_32)((*(buf) & 0x80) \ + ? -((png_int_32)((png_get_uint_32(buf) ^ 0xffffffffL) + 1)) \ + : (png_int_32)png_get_uint_32(buf))) + + /* If PNG_PREFIX is defined the same thing as below happens in pnglibconf.h, + * but defining a macro name prefixed with PNG_PREFIX. + */ +# ifndef PNG_PREFIX +# define png_get_uint_32(buf) PNG_get_uint_32(buf) +# define png_get_uint_16(buf) PNG_get_uint_16(buf) +# define png_get_int_32(buf) PNG_get_int_32(buf) +# endif +#else +# ifdef PNG_PREFIX + /* No macros; revert to the (redefined) function */ +# define PNG_get_uint_32 (png_get_uint_32) +# define PNG_get_uint_16 (png_get_uint_16) +# define PNG_get_int_32 (png_get_int_32) +# endif +#endif + +/******************************************************************************* + * SIMPLIFIED API + ******************************************************************************* + * + * Please read the documentation in libpng-manual.txt (TODO: write said + * documentation) if you don't understand what follows. + * + * The simplified API hides the details of both libpng and the PNG file format + * itself. It allows PNG files to be read into a very limited number of + * in-memory bitmap formats or to be written from the same formats. If these + * formats do not accomodate your needs then you can, and should, use the more + * sophisticated APIs above - these support a wide variety of in-memory formats + * and a wide variety of sophisticated transformations to those formats as well + * as a wide variety of APIs to manipulate ancillary information. + * + * To read a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure (see below) on the stack and set the + * version field to PNG_IMAGE_VERSION. + * 2) Call the appropriate png_image_begin_read... function. + * 3) Set the png_image 'format' member to the required sample format. + * 4) Allocate a buffer for the image and, if required, the color-map. + * 5) Call png_image_finish_read to read the image and, if required, the + * color-map into your buffers. + * + * There are no restrictions on the format of the PNG input itself; all valid + * color types, bit depths, and interlace methods are acceptable, and the + * input image is transformed as necessary to the requested in-memory format + * during the png_image_finish_read() step. The only caveat is that if you + * request a color-mapped image from a PNG that is full-color or makes + * complex use of an alpha channel the transformation is extremely lossy and the + * result may look terrible. + * + * To write a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure on the stack and memset() it to all zero. + * 2) Initialize the members of the structure that describe the image, setting + * the 'format' member to the format of the image samples. + * 3) Call the appropriate png_image_write... function with a pointer to the + * image and, if necessary, the color-map to write the PNG data. + * + * png_image is a structure that describes the in-memory format of an image + * when it is being read or defines the in-memory format of an image that you + * need to write: + */ +#define PNG_IMAGE_VERSION 1 + +typedef struct png_control *png_controlp; +typedef struct +{ + png_controlp opaque; /* Initialize to NULL, free with png_image_free */ + png_uint_32 version; /* Set to PNG_IMAGE_VERSION */ + png_uint_32 width; /* Image width in pixels (columns) */ + png_uint_32 height; /* Image height in pixels (rows) */ + png_uint_32 format; /* Image format as defined below */ + png_uint_32 flags; /* A bit mask containing informational flags */ + png_uint_32 colormap_entries; + /* Number of entries in the color-map */ + + /* In the event of an error or warning the following field will be set to a + * non-zero value and the 'message' field will contain a '\0' terminated + * string with the libpng error or warning message. If both warnings and + * an error were encountered, only the error is recorded. If there + * are multiple warnings, only the first one is recorded. + * + * The upper 30 bits of this value are reserved, the low two bits contain + * a value as follows: + */ +# define PNG_IMAGE_WARNING 1 +# define PNG_IMAGE_ERROR 2 + /* + * The result is a two bit code such that a value more than 1 indicates + * a failure in the API just called: + * + * 0 - no warning or error + * 1 - warning + * 2 - error + * 3 - error preceded by warning + */ +# define PNG_IMAGE_FAILED(png_cntrl) ((((png_cntrl).warning_or_error)&0x03)>1) + + png_uint_32 warning_or_error; + + char message[64]; +} png_image, *png_imagep; + +/* The samples of the image have one to four channels whose components have + * original values in the range 0 to 1.0: + * + * 1: A single gray or luminance channel (G). + * 2: A gray/luminance channel and an alpha channel (GA). + * 3: Three red, green, blue color channels (RGB). + * 4: Three color channels and an alpha channel (RGBA). + * + * The components are encoded in one of two ways: + * + * a) As a small integer, value 0..255, contained in a single byte. For the + * alpha channel the original value is simply value/255. For the color or + * luminance channels the value is encoded according to the sRGB specification + * and matches the 8-bit format expected by typical display devices. + * + * The color/gray channels are not scaled (pre-multiplied) by the alpha + * channel and are suitable for passing to color management software. + * + * b) As a value in the range 0..65535, contained in a 2-byte integer. All + * channels can be converted to the original value by dividing by 65535; all + * channels are linear. Color channels use the RGB encoding (RGB end-points) of + * the sRGB specification. This encoding is identified by the + * PNG_FORMAT_FLAG_LINEAR flag below. + * + * When the simplified API needs to convert between sRGB and linear colorspaces, + * the actual sRGB transfer curve defined in the sRGB specification (see the + * article at http://en.wikipedia.org/wiki/SRGB) is used, not the gamma=1/2.2 + * approximation used elsewhere in libpng. + * + * When an alpha channel is present it is expected to denote pixel coverage + * of the color or luminance channels and is returned as an associated alpha + * channel: the color/gray channels are scaled (pre-multiplied) by the alpha + * value. + * + * The samples are either contained directly in the image data, between 1 and 8 + * bytes per pixel according to the encoding, or are held in a color-map indexed + * by bytes in the image data. In the case of a color-map the color-map entries + * are individual samples, encoded as above, and the image data has one byte per + * pixel to select the relevant sample from the color-map. + */ + +/* PNG_FORMAT_* + * + * #defines to be used in png_image::format. Each #define identifies a + * particular layout of sample data and, if present, alpha values. There are + * separate defines for each of the two component encodings. + * + * A format is built up using single bit flag values. All combinations are + * valid. Formats can be built up from the flag values or you can use one of + * the predefined values below. When testing formats always use the FORMAT_FLAG + * macros to test for individual features - future versions of the library may + * add new flags. + * + * When reading or writing color-mapped images the format should be set to the + * format of the entries in the color-map then png_image_{read,write}_colormap + * called to read or write the color-map and set the format correctly for the + * image data. Do not set the PNG_FORMAT_FLAG_COLORMAP bit directly! + * + * NOTE: libpng can be built with particular features disabled, if you see + * compiler errors because the definition of one of the following flags has been + * compiled out it is because libpng does not have the required support. It is + * possible, however, for the libpng configuration to enable the format on just + * read or just write; in that case you may see an error at run time. You can + * guard against this by checking for the definition of the appropriate + * "_SUPPORTED" macro, one of: + * + * PNG_SIMPLIFIED_{READ,WRITE}_{BGR,AFIRST}_SUPPORTED + */ +#define PNG_FORMAT_FLAG_ALPHA 0x01U /* format with an alpha channel */ +#define PNG_FORMAT_FLAG_COLOR 0x02U /* color format: otherwise grayscale */ +#define PNG_FORMAT_FLAG_LINEAR 0x04U /* 2 byte channels else 1 byte */ +#define PNG_FORMAT_FLAG_COLORMAP 0x08U /* image data is color-mapped */ + +#ifdef PNG_FORMAT_BGR_SUPPORTED +# define PNG_FORMAT_FLAG_BGR 0x10U /* BGR colors, else order is RGB */ +#endif + +#ifdef PNG_FORMAT_AFIRST_SUPPORTED +# define PNG_FORMAT_FLAG_AFIRST 0x20U /* alpha channel comes first */ +#endif + +/* Commonly used formats have predefined macros. + * + * First the single byte (sRGB) formats: + */ +#define PNG_FORMAT_GRAY 0 +#define PNG_FORMAT_GA PNG_FORMAT_FLAG_ALPHA +#define PNG_FORMAT_AG (PNG_FORMAT_GA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_RGB PNG_FORMAT_FLAG_COLOR +#define PNG_FORMAT_BGR (PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_BGR) +#define PNG_FORMAT_RGBA (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ARGB (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_BGRA (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ABGR (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_AFIRST) + +/* Then the linear 2-byte formats. When naming these "Y" is used to + * indicate a luminance (gray) channel. + */ +#define PNG_FORMAT_LINEAR_Y PNG_FORMAT_FLAG_LINEAR +#define PNG_FORMAT_LINEAR_Y_ALPHA (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_LINEAR_RGB (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR) +#define PNG_FORMAT_LINEAR_RGB_ALPHA \ + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA) + +/* With color-mapped formats the image data is one byte for each pixel, the byte + * is an index into the color-map which is formatted as above. To obtain a + * color-mapped format it is sufficient just to add the PNG_FOMAT_FLAG_COLORMAP + * to one of the above definitions, or you can use one of the definitions below. + */ +#define PNG_FORMAT_RGB_COLORMAP (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGR_COLORMAP (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_RGBA_COLORMAP (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ARGB_COLORMAP (PNG_FORMAT_ARGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGRA_COLORMAP (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ABGR_COLORMAP (PNG_FORMAT_ABGR|PNG_FORMAT_FLAG_COLORMAP) + +/* PNG_IMAGE macros + * + * These are convenience macros to derive information from a png_image + * structure. The PNG_IMAGE_SAMPLE_ macros return values appropriate to the + * actual image sample values - either the entries in the color-map or the + * pixels in the image. The PNG_IMAGE_PIXEL_ macros return corresponding values + * for the pixels and will always return 1 for color-mapped formats. The + * remaining macros return information about the rows in the image and the + * complete image. + * + * NOTE: All the macros that take a png_image::format parameter are compile time + * constants if the format parameter is, itself, a constant. Therefore these + * macros can be used in array declarations and case labels where required. + * Similarly the macros are also pre-processor constants (sizeof is not used) so + * they can be used in #if tests. + * + * First the information about the samples. + */ +#define PNG_IMAGE_SAMPLE_CHANNELS(fmt)\ + (((fmt)&(PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA))+1) + /* Return the total number of channels in a given format: 1..4 */ + +#define PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)\ + ((((fmt) & PNG_FORMAT_FLAG_LINEAR) >> 2)+1) + /* Return the size in bytes of a single component of a pixel or color-map + * entry (as appropriate) in the image: 1 or 2. + */ + +#define PNG_IMAGE_SAMPLE_SIZE(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)) + /* This is the size of the sample data for one sample. If the image is + * color-mapped it is the size of one color-map entry (and image pixels are + * one byte in size), otherwise it is the size of one image pixel. + */ + +#define PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * 256) + /* The maximum size of the color-map required by the format expressed in a + * count of components. This can be used to compile-time allocate a + * color-map: + * + * png_uint_16 colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(linear_fmt)]; + * + * png_byte colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(sRGB_fmt)]; + * + * Alternatively use the PNG_IMAGE_COLORMAP_SIZE macro below to use the + * information from one of the png_image_begin_read_ APIs and dynamically + * allocate the required memory. + */ + +/* Corresponding information about the pixels */ +#define PNG_IMAGE_PIXEL_(test,fmt)\ + (((fmt)&PNG_FORMAT_FLAG_COLORMAP)?1:test(fmt)) + +#define PNG_IMAGE_PIXEL_CHANNELS(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_CHANNELS,fmt) + /* The number of separate channels (components) in a pixel; 1 for a + * color-mapped image. + */ + +#define PNG_IMAGE_PIXEL_COMPONENT_SIZE(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_COMPONENT_SIZE,fmt) + /* The size, in bytes, of each component in a pixel; 1 for a color-mapped + * image. + */ + +#define PNG_IMAGE_PIXEL_SIZE(fmt) PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_SIZE,fmt) + /* The size, in bytes, of a complete pixel; 1 for a color-mapped image. */ + +/* Information about the whole row, or whole image */ +#define PNG_IMAGE_ROW_STRIDE(image)\ + (PNG_IMAGE_PIXEL_CHANNELS((image).format) * (image).width) + /* Return the total number of components in a single row of the image; this + * is the minimum 'row stride', the minimum count of components between each + * row. For a color-mapped image this is the minimum number of bytes in a + * row. + */ + +#define PNG_IMAGE_BUFFER_SIZE(image, row_stride)\ + (PNG_IMAGE_PIXEL_COMPONENT_SIZE((image).format)*(image).height*(row_stride)) + /* Return the size, in bytes, of an image buffer given a png_image and a row + * stride - the number of components to leave space for in each row. + */ + +#define PNG_IMAGE_SIZE(image)\ + PNG_IMAGE_BUFFER_SIZE(image, PNG_IMAGE_ROW_STRIDE(image)) + /* Return the size, in bytes, of the image in memory given just a png_image; + * the row stride is the minimum stride required for the image. + */ + +#define PNG_IMAGE_COLORMAP_SIZE(image)\ + (PNG_IMAGE_SAMPLE_SIZE((image).format) * (image).colormap_entries) + /* Return the size, in bytes, of the color-map of this image. If the image + * format is not a color-map format this will return a size sufficient for + * 256 entries in the given format; check PNG_FORMAT_FLAG_COLORMAP if + * you don't want to allocate a color-map in this case. + */ + +/* PNG_IMAGE_FLAG_* + * + * Flags containing additional information about the image are held in the + * 'flags' field of png_image. + */ +#define PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB 0x01 + /* This indicates the the RGB values of the in-memory bitmap do not + * correspond to the red, green and blue end-points defined by sRGB. + */ + +#define PNG_IMAGE_FLAG_FAST 0x02 + /* On write emphasise speed over compression; the resultant PNG file will be + * larger but will be produced significantly faster, particular for large + * images. Do not use this option for images which will be distributed, only + * used it when producing intermediate files that will be read back in + * repeatedly. For a typical 24-bit image the option will double the read + * speed at the cost of increasing the image size by 25%, however for many + * more compressible images the PNG file can be 10 times larger with only a + * slight speed gain. + */ + +#define PNG_IMAGE_FLAG_16BIT_sRGB 0x04 + /* On read if the image is a 16-bit per component image and there is no gAMA + * or sRGB chunk assume that the components are sRGB encoded. Notice that + * images output by the simplified API always have gamma information; setting + * this flag only affects the interpretation of 16-bit images from an + * external source. It is recommended that the application expose this flag + * to the user; the user can normally easily recognize the difference between + * linear and sRGB encoding. This flag has no effect on write - the data + * passed to the write APIs must have the correct encoding (as defined + * above.) + * + * If the flag is not set (the default) input 16-bit per component data is + * assumed to be linear. + * + * NOTE: the flag can only be set after the png_image_begin_read_ call, + * because that call initializes the 'flags' field. + */ + +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED +/* READ APIs + * --------- + * + * The png_image passed to the read APIs must have been initialized by setting + * the png_controlp field 'opaque' to NULL (or, safer, memset the whole thing.) + */ +#ifdef PNG_STDIO_SUPPORTED +PNG_EXPORT(234, int, png_image_begin_read_from_file, (png_imagep image, + const char *file_name)); + /* The named file is opened for read and the image header is filled in + * from the PNG header in the file. + */ + +PNG_EXPORT(235, int, png_image_begin_read_from_stdio, (png_imagep image, + FILE* file)); + /* The PNG header is read from the stdio FILE object. */ +#endif /* PNG_STDIO_SUPPORTED */ + +PNG_EXPORT(236, int, png_image_begin_read_from_memory, (png_imagep image, + png_const_voidp memory, png_size_t size)); + /* The PNG header is read from the given memory buffer. */ + +PNG_EXPORT(237, int, png_image_finish_read, (png_imagep image, + png_const_colorp background, void *buffer, png_int_32 row_stride, + void *colormap)); + /* Finish reading the image into the supplied buffer and clean up the + * png_image structure. + * + * row_stride is the step, in byte or 2-byte units as appropriate, + * between adjacent rows. A positive stride indicates that the top-most row + * is first in the buffer - the normal top-down arrangement. A negative + * stride indicates that the bottom-most row is first in the buffer. + * + * background need only be supplied if an alpha channel must be removed from + * a png_byte format and the removal is to be done by compositing on a solid + * color; otherwise it may be NULL and any composition will be done directly + * onto the buffer. The value is an sRGB color to use for the background, + * for grayscale output the green channel is used. + * + * background must be supplied when an alpha channel must be removed from a + * single byte color-mapped output format, in other words if: + * + * 1) The original format from png_image_begin_read_from_* had + * PNG_FORMAT_FLAG_ALPHA set. + * 2) The format set by the application does not. + * 3) The format set by the application has PNG_FORMAT_FLAG_COLORMAP set and + * PNG_FORMAT_FLAG_LINEAR *not* set. + * + * For linear output removing the alpha channel is always done by compositing + * on black and background is ignored. + * + * colormap must be supplied when PNG_FORMAT_FLAG_COLORMAP is set. It must + * be at least the size (in bytes) returned by PNG_IMAGE_COLORMAP_SIZE. + * image->colormap_entries will be updated to the actual number of entries + * written to the colormap; this may be less than the original value. + */ + +PNG_EXPORT(238, void, png_image_free, (png_imagep image)); + /* Free any data allocated by libpng in image->opaque, setting the pointer to + * NULL. May be called at any time after the structure is initialized. + */ +#endif /* PNG_SIMPLIFIED_READ_SUPPORTED */ + +#ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED +/* WRITE APIS + * ---------- + * For write you must initialize a png_image structure to describe the image to + * be written. To do this use memset to set the whole structure to 0 then + * initialize fields describing your image. + * + * version: must be set to PNG_IMAGE_VERSION + * opaque: must be initialized to NULL + * width: image width in pixels + * height: image height in rows + * format: the format of the data (image and color-map) you wish to write + * flags: set to 0 unless one of the defined flags applies; set + * PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB for color format images where the RGB + * values do not correspond to the colors in sRGB. + * colormap_entries: set to the number of entries in the color-map (0 to 256) + */ +PNG_EXPORT(239, int, png_image_write_to_file, (png_imagep image, + const char *file, int convert_to_8bit, const void *buffer, + png_int_32 row_stride, const void *colormap)); + /* Write the image to the named file. */ + +PNG_EXPORT(240, int, png_image_write_to_stdio, (png_imagep image, FILE *file, + int convert_to_8_bit, const void *buffer, png_int_32 row_stride, + const void *colormap)); + /* Write the image to the given (FILE*). */ + +/* With both write APIs if image is in one of the linear formats with 16-bit + * data then setting convert_to_8_bit will cause the output to be an 8-bit PNG + * gamma encoded according to the sRGB specification, otherwise a 16-bit linear + * encoded PNG file is written. + * + * With color-mapped data formats the colormap parameter point to a color-map + * with at least image->colormap_entries encoded in the specified format. If + * the format is linear the written PNG color-map will be converted to sRGB + * regardless of the convert_to_8_bit flag. + * + * With all APIs row_stride is handled as in the read APIs - it is the spacing + * from one row to the next in component sized units (1 or 2 bytes) and if + * negative indicates a bottom-up row layout in the buffer. + * + * Note that the write API does not support interlacing or sub-8-bit pixels. + */ +#endif /* PNG_SIMPLIFIED_WRITE_SUPPORTED */ +/******************************************************************************* + * END OF SIMPLIFIED API + ******************************************************************************/ + +#ifdef PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +PNG_EXPORT(242, void, png_set_check_for_invalid_index, + (png_structrp png_ptr, int allowed)); +# ifdef PNG_GET_PALETTE_MAX_SUPPORTED +PNG_EXPORT(243, int, png_get_palette_max, (png_const_structp png_ptr, + png_const_infop info_ptr)); +# endif +#endif /* CHECK_FOR_INVALID_INDEX */ + +/******************************************************************************* + * IMPLEMENTATION OPTIONS + ******************************************************************************* + * + * Support for arbitrary implementation-specific optimizations. The API allows + * particular options to be turned on or off. 'Option' is the number of the + * option and 'onoff' is 0 (off) or non-0 (on). The value returned is given + * by the PNG_OPTION_ defines below. + * + * HARDWARE: normally hardware capabilites, such as the Intel SSE instructions, + * are detected at run time, however sometimes it may be impossible + * to do this in user mode, in which case it is necessary to discover + * the capabilities in an OS specific way. Such capabilities are + * listed here when libpng has support for them and must be turned + * ON by the application if present. + * + * SOFTWARE: sometimes software optimizations actually result in performance + * decrease on some architectures or systems, or with some sets of + * PNG images. 'Software' options allow such optimizations to be + * selected at run time. + */ +#ifdef PNG_SET_OPTION_SUPPORTED +#ifdef PNG_ARM_NEON_API_SUPPORTED +# define PNG_ARM_NEON 0 /* HARDWARE: ARM Neon SIMD instructions supported */ +#endif +#define PNG_OPTION_NEXT 2 /* Next option - numbers must be even */ + +/* Return values: NOTE: there are four values and 'off' is *not* zero */ +#define PNG_OPTION_UNSET 0 /* Unset - defaults to off */ +#define PNG_OPTION_INVALID 1 /* Option number out of range */ +#define PNG_OPTION_OFF 2 +#define PNG_OPTION_ON 3 + +PNG_EXPORT(244, int, png_set_option, (png_structrp png_ptr, int option, + int onoff)); +#endif + +/******************************************************************************* + * END OF HARDWARE OPTIONS + ******************************************************************************/ + +/* Maintainer: Put new public prototypes here ^, in libpng.3, and project + * defs, scripts/pnglibconf.h, and scripts/pnglibconf.h.prebuilt + */ + +/* The last ordinal number (this is the *last* one already used; the next + * one to use is one more than this.) Maintainer, remember to add an entry to + * scripts/symbols.def as well. + */ +#ifdef PNG_EXPORT_LAST_ORDINAL + PNG_EXPORT_LAST_ORDINAL(244); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PNG_VERSION_INFO_ONLY */ +/* Do not put anything past this line */ +#endif /* PNG_H */ diff --git a/src/SDL2/external/libpng-1.6.2/pngbar.jpg b/src/SDL2/external/libpng-1.6.2/pngbar.jpg new file mode 100644 index 0000000000000000000000000000000000000000..70ba8d817ce433788c7933dbe3c29c3e384b2b0a GIT binary patch literal 2498 zcmb79cR1UN8veLX-}`>=f8Y0x?_}m=8Q`%n#hU_5OiaM90Zxtq1>=CgTfsNH zyhE`{nwsjeShHXcFRV>~hi`yq2v*YHBRtd~Fu*+^LY^4lCw1}#Lva_%-vvRO=aKPAMFitLB9!@Se7YxRO;(_xakVqs4H@^T1A;613B7T`LfloCM zC>s>YhTw#8BK~ij^a5~J00TIJnM42(oCyqPI(Y@00RRyA^t=CpnFWBbLcymyB_03- z0x_M|W@3T<`-BN}TAvxt!Yd50@*zZ&*pN77LnCW9lz^y8aNMcnEYqn3{J(Y(W-t^0 zvHZ$XfCC^V5CqH&h5jdw2?Phg5ME(JD6^7?wOdfuSH8H0zP}N;;+36~Ie_ET2?Phj z0ewJu_XPOzrM!FkVBFSWa?9PHSVQF9@l6YED#^WWRML1J9VDQieoKN{=G;@B(Vmqw zMZd`y)ni0|7a{dGH#QBu4Xb>^8Ml-38dtbR*{4J6CiE}A`n<^Swi_b~53dp@Oz5&x zqIb>@R2bY|^Eg5Q^oZrcolUy~e~ev4`E;SpK(~nwOpGHYx7IEN6TgtCZ%ql2@{}O= zB=jD|t!NkbZ`gujXu2t1GZEV?OI;QB^sVbc{HllYU92vX0u%;zs?5Dy7i5b^Vr}Pn zO2G4GXu7^$QmgA^)I4+H4Ve#&F8{pR>+ENwX4HwzetiUp&~J{h-wxp)&2&qMG9ULl z$1sGXW1&H@50#Izy=lZUfjypz`|x(CS!BmIDmt4<-iM+7vJJYh6Ok&Y`9uLDz-dii|{T@&nMOnhYGW-(Yq<%v= zZ{=JMeWTwA?P4UG8a$$%3#A_D7*<`B{srsRec$8y$6ez;HO0+<=@)~a+C#KD$fFie zOF5lh(}n6`?kJ=#rB8?(qO_~`d`n%$zP0)o`DHOCeo?6M-Pn1fN6p1D_{#*0&JIPU zL@9JFTVPL!MG(xN{Pyi$)cs@-UVOt7&mCx*p!Qt+LYRroDYFGACZJ{8Pxa zhc4YRL#jc2?yi*%aQ(San~2E>xW1QR0J9uq>9 zE|N+~DEC)g{=F~&W?nheQJ?`Q<2i%Wz?M||p-DL5&AOs`qIe3z=N#%2ExTl7#Mi~t zZTvmnY2L6RG=bnbgRr9M+u}{jp7ydMJN^)W@t){SwRelgUb%&^y1 zM;W@kz|uUoUabJ?0dbrrlPe>APntXLz&pJ5ZWI7}GEh1`;2^(^ytgu48%@k}`m_4R zx8US1L-x+#p75_R@wMZVM}ykuYvioTTGW)v@utp6&FdCbVm5jv1($E4n`7P(vX8P^ zVZA#7-KlKgbTX}&!a_R%ta^0&^b~I$WKg~SIROeW8CO-de{#3jS6!TXFi85;P@Hrz zD3>)2F0f1;VrK&%21hW;jd0Cjw4?npnIr&aVCT_ zW9a^Bg^fd&pImbNpxTP+{rooTc`NU48`F^mV8?f=97sYHnM7{LO)G6#omwpLj@zjk z*`m5o3~<=GP;|qAvDunf<-pg& zIH~t>Us-XJV%rkrKOD99=3flubRj$V{UNE2PCJI@Qi7&wDXM|x@Dll=Tj)D@Y(u1P z7_yCfQ%}|zKKprCcz*XtvG}TKViW44NE~ZF&3pW4f2!sm`cI`U`Bl!2_PqS3Dvok5 z=2eTiaWh#`Q&nhOeYk8Y2gu}DUKS%W-&K5bD>U`DQo92*Z9Jvl-A7zo%D^O5+z3*TS2sjBs^v)SGJg_-$$y+3;FN@u#o{#rqd z=-;Zemc);1)~-n;ZNYgD*QCx)qTS?(6>`Yxu0|T02j9{jA-iY!XBs6VtKgN(?M>3M zXitp$#9|Y^aqefnpO5s_bc&VI`Mol8lb36szrH?8J9^Y{Sh=Zut;vy9EAFY*!eBw< zUh1>Fup<1+##XO=O2huD7w?@yH~akK6(i-EANrw@1tl$;?SdE;AJIJyTU&yrti_SX zqL2K}JyH4R*vHyPyly4H@@Qky6>b`Z!-~dp<=^<0ql8jCIzJ{n2`02PuA?k^A&hB? zljJT{WGG{Bb%mft`m0YCNhgQcH?}Ga`o4KT7r9mpTO|G-ajjf)rUae~l{ z0Rja6`T3xspr4_iba{e!dVHCinSz3e@1>=%j($2G9;~mjBv2nTG{hSR28W4<;$UEa zfq+#nVBJJS0RaHmC@AQFfQX5U(+mu00070t%A%vz78nt@y3y1S5N2m)Kc7E!n|s1o zS3*LZ`|ImCIy_xnT}Vn#B_<}-6cj!`B>eC1D=aTfO-&XS7mt#WfPvpvG$H~507gef za(0FG_V)er^K^NAv$WC-3=ME`ynZ!EiHe1F4i6%tFFzXq(o3jLNqluBO@b zVbTT$78e$QPf^Cm#xylL6B84MYEWEsVPscG4Gj%}gp7rShJJ*J1_uTQ1qZgcwgm+R zTU=lS0|Z`PB(t=$0s#U60RaF30IsgC78d%fuB?oX+;MYqIXXKmDvVH6GZr>DJ8*F|pP|?3h={zu&lnR8iH(zuj*X0tj8%hK4-gJ}V^=2} z6>oEP2?_mre}vT-7)}5HC?_Km6cv1ad;tIecYA?^h0qZY6Aum%b9;T@R8)kCkwQa5 zadmqS2M0SlJZ)}m(EtEcS6dMa3_n3bUt?)wWMf%cS%!(3`QP6|MM@eP`5+-7d3AOF z|Nm+%D{E|VNkkrIXlz47LkkNGKtMq3?d<#K=S5UV_RGudo}K{#0%vG&=I7>ARK#Xx zZ!^wXXe#HK_DO?>Sbn6Qdo$IQAs2u8X6iK7#qpU$!=|P zH#j{eCMlYoeM(75KtVqc5c_+8WeN%km6n;gySbjFueP_g0|EoHwX*;K|7dG)!Bu-G z000IGNklHt z*vcw)0ZfC}7KY%R=*angFf7GDQDX{kit>gDqYzS58b_&yP)Sh~f_vJw^;p^2y#yCM zISs%G832=BMOOfjy#g7m@ zt+jh(w*X#u^vDspeASlpa4&Rno;k@j!sy{`WCR+Uq@`vIjHM+IP*3zXu&|I&vvBhr zt5-6<$;<(2f0#8w1lUp z1?ZrY7`SR}R`W7r#`?tgl6cdPoX?M$DvQtWI;4E?_jQN%)H5pc$G$QI+vc!SEpCkx z#+g9_7fww>9KozuLwWI;j6+9TpAhcZ3t)y?l zdFG(xs{LWrE9KT-raI@mim4p&N{FMfnYvkx$&R<(ms07RfJb`ikXw53l+@$=(}P z?MpK-^c){YFoBt|a4?lG5TfY@J<<>?PQod%2Mgco&28>|0SA}+mYBOllOs`!S5By% zPP)yMN8hY0FHucYC;n_6!ovRAX#_Va6gmb@(5FOo!%@D@y8%T(VK`nksAFI>hf954 z%;R4p&z*B}R#o1+ANee}?qI;Zm|;~&O?-uKytC6Dx4SG1Pcbm+Lj?nKq_BGlH;X_Kt|nbMUG0>1pkOx7k6gb9<~7 zEJCZ>+w;OZRw?IW&lmbl5aqEGH3-e+iMsSUx=|fB7lp(Cl}Z05;e)elg=25lhPU3OFC-`X4O~Pp z(+u8SxX6@Nu-gU$cM%?iDf;}>eg@uPwZ7NbAfwc4%LKv$AESApwMAQTgR)Bj)d}7P zwCAfKkJo5opoC@6Lg<3Mcwvcs4!^5<=}qW6{9VgWp{KyaBpI7crIgaZ7IUp RQSJZ$002ovPDHLkV1iCKFfIT9 literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/pngconf.h b/src/SDL2/external/libpng-1.6.2/pngconf.h new file mode 100644 index 000000000..31f996757 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngconf.h @@ -0,0 +1,616 @@ + +/* pngconf.h - machine configurable file for libpng + * + * libpng version 1.6.2 - April 25, 2013 + * + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + */ + +/* Any machine specific code is near the front of this file, so if you + * are configuring libpng for a machine, you may want to read the section + * starting here down to where it starts to typedef png_color, png_text, + * and png_info. + */ + +#ifndef PNGCONF_H +#define PNGCONF_H + +/* To do: Do all of this in scripts/pnglibconf.dfa */ +#ifdef PNG_SAFE_LIMITS_SUPPORTED +# ifdef PNG_USER_WIDTH_MAX +# undef PNG_USER_WIDTH_MAX +# define PNG_USER_WIDTH_MAX 1000000L +# endif +# ifdef PNG_USER_HEIGHT_MAX +# undef PNG_USER_HEIGHT_MAX +# define PNG_USER_HEIGHT_MAX 1000000L +# endif +# ifdef PNG_USER_CHUNK_MALLOC_MAX +# undef PNG_USER_CHUNK_MALLOC_MAX +# define PNG_USER_CHUNK_MALLOC_MAX 4000000L +# endif +# ifdef PNG_USER_CHUNK_CACHE_MAX +# undef PNG_USER_CHUNK_CACHE_MAX +# define PNG_USER_CHUNK_CACHE_MAX 128 +# endif +#endif + +#ifndef PNG_BUILDING_SYMBOL_TABLE /* else includes may cause problems */ + +/* From libpng 1.6.0 libpng requires an ANSI X3.159-1989 ("ISOC90") compliant C + * compiler for correct compilation. The following header files are required by + * the standard. If your compiler doesn't provide these header files, or they + * do not match the standard, you will need to provide/improve them. + */ +#include +#include + +/* Library header files. These header files are all defined by ISOC90; libpng + * expects conformant implementations, however, an ISOC90 conformant system need + * not provide these header files if the functionality cannot be implemented. + * In this case it will be necessary to disable the relevant parts of libpng in + * the build of pnglibconf.h. + * + * Prior to 1.6.0 string.h was included here; the API changes in 1.6.0 to not + * include this unnecessary header file. + */ + +#ifdef PNG_STDIO_SUPPORTED + /* Required for the definition of FILE: */ +# include +#endif + +#ifdef PNG_SETJMP_SUPPORTED + /* Required for the definition of jmp_buf and the declaration of longjmp: */ +# include +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED + /* Required for struct tm: */ +# include +#endif + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +/* Prior to 1.6.0 it was possible to turn off 'const' in declarations using + * PNG_NO_CONST; this is no longer supported except for data declarations which + * apparently still cause problems in 2011 on some compilers. + */ +#define PNG_CONST const /* backward compatibility only */ + +/* This controls optimization of the reading of 16 and 32 bit values + * from PNG files. It can be set on a per-app-file basis - it + * just changes whether a macro is used when the function is called. + * The library builder sets the default; if read functions are not + * built into the library the macro implementation is forced on. + */ +#ifndef PNG_READ_INT_FUNCTIONS_SUPPORTED +# define PNG_USE_READ_MACROS +#endif +#if !defined(PNG_NO_USE_READ_MACROS) && !defined(PNG_USE_READ_MACROS) +# if PNG_DEFAULT_READ_MACROS +# define PNG_USE_READ_MACROS +# endif +#endif + +/* COMPILER SPECIFIC OPTIONS. + * + * These options are provided so that a variety of difficult compilers + * can be used. Some are fixed at build time (e.g. PNG_API_RULE + * below) but still have compiler specific implementations, others + * may be changed on a per-file basis when compiling against libpng. + */ + +/* The PNGARG macro was used in versions of libpng prior to 1.6.0 to protect + * against legacy (pre ISOC90) compilers that did not understand function + * prototypes. It is not required for modern C compilers. + */ +#ifndef PNGARG +# define PNGARG(arglist) arglist +#endif + +/* Function calling conventions. + * ============================= + * Normally it is not necessary to specify to the compiler how to call + * a function - it just does it - however on x86 systems derived from + * Microsoft and Borland C compilers ('IBM PC', 'DOS', 'Windows' systems + * and some others) there are multiple ways to call a function and the + * default can be changed on the compiler command line. For this reason + * libpng specifies the calling convention of every exported function and + * every function called via a user supplied function pointer. This is + * done in this file by defining the following macros: + * + * PNGAPI Calling convention for exported functions. + * PNGCBAPI Calling convention for user provided (callback) functions. + * PNGCAPI Calling convention used by the ANSI-C library (required + * for longjmp callbacks and sometimes used internally to + * specify the calling convention for zlib). + * + * These macros should never be overridden. If it is necessary to + * change calling convention in a private build this can be done + * by setting PNG_API_RULE (which defaults to 0) to one of the values + * below to select the correct 'API' variants. + * + * PNG_API_RULE=0 Use PNGCAPI - the 'C' calling convention - throughout. + * This is correct in every known environment. + * PNG_API_RULE=1 Use the operating system convention for PNGAPI and + * the 'C' calling convention (from PNGCAPI) for + * callbacks (PNGCBAPI). This is no longer required + * in any known environment - if it has to be used + * please post an explanation of the problem to the + * libpng mailing list. + * + * These cases only differ if the operating system does not use the C + * calling convention, at present this just means the above cases + * (x86 DOS/Windows sytems) and, even then, this does not apply to + * Cygwin running on those systems. + * + * Note that the value must be defined in pnglibconf.h so that what + * the application uses to call the library matches the conventions + * set when building the library. + */ + +/* Symbol export + * ============= + * When building a shared library it is almost always necessary to tell + * the compiler which symbols to export. The png.h macro 'PNG_EXPORT' + * is used to mark the symbols. On some systems these symbols can be + * extracted at link time and need no special processing by the compiler, + * on other systems the symbols are flagged by the compiler and just + * the declaration requires a special tag applied (unfortunately) in a + * compiler dependent way. Some systems can do either. + * + * A small number of older systems also require a symbol from a DLL to + * be flagged to the program that calls it. This is a problem because + * we do not know in the header file included by application code that + * the symbol will come from a shared library, as opposed to a statically + * linked one. For this reason the application must tell us by setting + * the magic flag PNG_USE_DLL to turn on the special processing before + * it includes png.h. + * + * Four additional macros are used to make this happen: + * + * PNG_IMPEXP The magic (if any) to cause a symbol to be exported from + * the build or imported if PNG_USE_DLL is set - compiler + * and system specific. + * + * PNG_EXPORT_TYPE(type) A macro that pre or appends PNG_IMPEXP to + * 'type', compiler specific. + * + * PNG_DLL_EXPORT Set to the magic to use during a libpng build to + * make a symbol exported from the DLL. Not used in the + * public header files; see pngpriv.h for how it is used + * in the libpng build. + * + * PNG_DLL_IMPORT Set to the magic to force the libpng symbols to come + * from a DLL - used to define PNG_IMPEXP when + * PNG_USE_DLL is set. + */ + +/* System specific discovery. + * ========================== + * This code is used at build time to find PNG_IMPEXP, the API settings + * and PNG_EXPORT_TYPE(), it may also set a macro to indicate the DLL + * import processing is possible. On Windows systems it also sets + * compiler-specific macros to the values required to change the calling + * conventions of the various functions. + */ +#if defined(_Windows) || defined(_WINDOWS) || defined(WIN32) ||\ + defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) + /* Windows system (DOS doesn't support DLLs). Includes builds under Cygwin or + * MinGW on any architecture currently supported by Windows. Also includes + * Watcom builds but these need special treatment because they are not + * compatible with GCC or Visual C because of different calling conventions. + */ +# if PNG_API_RULE == 2 + /* If this line results in an error, either because __watcall is not + * understood or because of a redefine just below you cannot use *this* + * build of the library with the compiler you are using. *This* build was + * build using Watcom and applications must also be built using Watcom! + */ +# define PNGCAPI __watcall +# endif + +# if defined(__GNUC__) || (defined(_MSC_VER) && (_MSC_VER >= 800)) +# define PNGCAPI __cdecl +# if PNG_API_RULE == 1 + /* If this line results in an error __stdcall is not understood and + * PNG_API_RULE should not have been set to '1'. + */ +# define PNGAPI __stdcall +# endif +# else + /* An older compiler, or one not detected (erroneously) above, + * if necessary override on the command line to get the correct + * variants for the compiler. + */ +# ifndef PNGCAPI +# define PNGCAPI _cdecl +# endif +# if PNG_API_RULE == 1 && !defined(PNGAPI) +# define PNGAPI _stdcall +# endif +# endif /* compiler/api */ + /* NOTE: PNGCBAPI always defaults to PNGCAPI. */ + +# if defined(PNGAPI) && !defined(PNG_USER_PRIVATEBUILD) +# error "PNG_USER_PRIVATEBUILD must be defined if PNGAPI is changed" +# endif + +# if (defined(_MSC_VER) && _MSC_VER < 800) ||\ + (defined(__BORLANDC__) && __BORLANDC__ < 0x500) + /* older Borland and MSC + * compilers used '__export' and required this to be after + * the type. + */ +# ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) type PNG_IMPEXP +# endif +# define PNG_DLL_EXPORT __export +# else /* newer compiler */ +# define PNG_DLL_EXPORT __declspec(dllexport) +# ifndef PNG_DLL_IMPORT +# define PNG_DLL_IMPORT __declspec(dllimport) +# endif +# endif /* compiler */ + +#else /* !Windows */ +# if (defined(__IBMC__) || defined(__IBMCPP__)) && defined(__OS2__) +# define PNGAPI _System +# else /* !Windows/x86 && !OS/2 */ + /* Use the defaults, or define PNG*API on the command line (but + * this will have to be done for every compile!) + */ +# endif /* other system, !OS/2 */ +#endif /* !Windows/x86 */ + +/* Now do all the defaulting . */ +#ifndef PNGCAPI +# define PNGCAPI +#endif +#ifndef PNGCBAPI +# define PNGCBAPI PNGCAPI +#endif +#ifndef PNGAPI +# define PNGAPI PNGCAPI +#endif + +/* PNG_IMPEXP may be set on the compilation system command line or (if not set) + * then in an internal header file when building the library, otherwise (when + * using the library) it is set here. + */ +#ifndef PNG_IMPEXP +# if defined(PNG_USE_DLL) && defined(PNG_DLL_IMPORT) + /* This forces use of a DLL, disallowing static linking */ +# define PNG_IMPEXP PNG_DLL_IMPORT +# endif + +# ifndef PNG_IMPEXP +# define PNG_IMPEXP +# endif +#endif + +/* In 1.5.2 the definition of PNG_FUNCTION has been changed to always treat + * 'attributes' as a storage class - the attributes go at the start of the + * function definition, and attributes are always appended regardless of the + * compiler. This considerably simplifies these macros but may cause problems + * if any compilers both need function attributes and fail to handle them as + * a storage class (this is unlikely.) + */ +#ifndef PNG_FUNCTION +# define PNG_FUNCTION(type, name, args, attributes) attributes type name args +#endif + +#ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) PNG_IMPEXP type +#endif + + /* The ordinal value is only relevant when preprocessing png.h for symbol + * table entries, so we discard it here. See the .dfn files in the + * scripts directory. + */ +#ifndef PNG_EXPORTA + +# define PNG_EXPORTA(ordinal, type, name, args, attributes)\ + PNG_FUNCTION(PNG_EXPORT_TYPE(type),(PNGAPI name),PNGARG(args), \ + extern attributes) +#endif + +/* ANSI-C (C90) does not permit a macro to be invoked with an empty argument, + * so make something non-empty to satisfy the requirement: + */ +#define PNG_EMPTY /*empty list*/ + +#define PNG_EXPORT(ordinal, type, name, args)\ + PNG_EXPORTA(ordinal, type, name, args, PNG_EMPTY) + +/* Use PNG_REMOVED to comment out a removed interface. */ +#ifndef PNG_REMOVED +# define PNG_REMOVED(ordinal, type, name, args, attributes) +#endif + +#ifndef PNG_CALLBACK +# define PNG_CALLBACK(type, name, args) type (PNGCBAPI name) PNGARG(args) +#endif + +/* Support for compiler specific function attributes. These are used + * so that where compiler support is available incorrect use of API + * functions in png.h will generate compiler warnings. + * + * Added at libpng-1.2.41. + */ + +#ifndef PNG_NO_PEDANTIC_WARNINGS +# ifndef PNG_PEDANTIC_WARNINGS_SUPPORTED +# define PNG_PEDANTIC_WARNINGS_SUPPORTED +# endif +#endif + +#ifdef PNG_PEDANTIC_WARNINGS_SUPPORTED + /* Support for compiler specific function attributes. These are used + * so that where compiler support is available, incorrect use of API + * functions in png.h will generate compiler warnings. Added at libpng + * version 1.2.41. Disabling these removes the warnings but may also produce + * less efficient code. + */ +# if defined(__GNUC__) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# if __GNUC__ >= 3 +# ifndef PNG_ALLOCATED +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# ifndef PNG_PRIVATE +# if 0 /* Doesn't work so we use deprecated instead*/ +# define PNG_PRIVATE \ + __attribute__((warning("This function is not exported by libpng."))) +# else +# define PNG_PRIVATE \ + __attribute__((__deprecated__)) +# endif +# endif +# if ((__GNUC__ != 3) || !defined(__GNUC_MINOR__) || (__GNUC_MINOR__ >= 1)) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif /* __GNUC__ == 3.0 */ +# endif /* __GNUC__ >= 3 */ + +# elif defined(_MSC_VER) && (_MSC_VER >= 1300) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* not supported */ +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __declspec(noreturn) +# endif +# ifndef PNG_ALLOCATED +# if (_MSC_VER >= 1400) +# define PNG_ALLOCATED __declspec(restrict) +# endif +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __declspec(deprecated) +# endif +# ifndef PNG_PRIVATE +# define PNG_PRIVATE __declspec(deprecated) +# endif +# ifndef PNG_RESTRICT +# if (_MSC_VER >= 1400) +# define PNG_RESTRICT __restrict +# endif +# endif + +# elif defined(__WATCOMC__) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif /* _MSC_VER */ +#endif /* PNG_PEDANTIC_WARNINGS */ + +#ifndef PNG_DEPRECATED +# define PNG_DEPRECATED /* Use of this function is deprecated */ +#endif +#ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* The result of this function must be checked */ +#endif +#ifndef PNG_NORETURN +# define PNG_NORETURN /* This function does not return */ +#endif +#ifndef PNG_ALLOCATED +# define PNG_ALLOCATED /* The result of the function is new memory */ +#endif +#ifndef PNG_PRIVATE +# define PNG_PRIVATE /* This is a private libpng function */ +#endif +#ifndef PNG_RESTRICT +# define PNG_RESTRICT /* The C99 "restrict" feature */ +#endif +#ifndef PNG_FP_EXPORT /* A floating point API. */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +# define PNG_FP_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No floating point APIs */ +# define PNG_FP_EXPORT(ordinal, type, name, args) +# endif +#endif +#ifndef PNG_FIXED_EXPORT /* A fixed point API. */ +# ifdef PNG_FIXED_POINT_SUPPORTED +# define PNG_FIXED_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No fixed point APIs */ +# define PNG_FIXED_EXPORT(ordinal, type, name, args) +# endif +#endif + +#ifndef PNG_BUILDING_SYMBOL_TABLE +/* Some typedefs to get us started. These should be safe on most of the common + * platforms. + * + * png_uint_32 and png_int_32 may, currently, be larger than required to hold a + * 32-bit value however this is not normally advisable. + * + * png_uint_16 and png_int_16 should always be two bytes in size - this is + * verified at library build time. + * + * png_byte must always be one byte in size. + * + * The checks below use constants from limits.h, as defined by the ISOC90 + * standard. + */ +#if CHAR_BIT == 8 && UCHAR_MAX == 255 + typedef unsigned char png_byte; +#else +# error "libpng requires 8 bit bytes" +#endif + +#if INT_MIN == -32768 && INT_MAX == 32767 + typedef int png_int_16; +#elif SHRT_MIN == -32768 && SHRT_MAX == 32767 + typedef short png_int_16; +#else +# error "libpng requires a signed 16 bit type" +#endif + +#if UINT_MAX == 65535 + typedef unsigned int png_uint_16; +#elif USHRT_MAX == 65535 + typedef unsigned short png_uint_16; +#else +# error "libpng requires an unsigned 16 bit type" +#endif + +#if INT_MIN < -2147483646 && INT_MAX > 2147483646 + typedef int png_int_32; +#elif LONG_MIN < -2147483646 && LONG_MAX > 2147483646 + typedef long int png_int_32; +#else +# error "libpng requires a signed 32 bit (or more) type" +#endif + +#if UINT_MAX > 4294967294 + typedef unsigned int png_uint_32; +#elif ULONG_MAX > 4294967294 + typedef unsigned long int png_uint_32; +#else +# error "libpng requires an unsigned 32 bit (or more) type" +#endif + +/* Prior to 1.6.0 it was possible to disable the use of size_t, 1.6.0, however, + * requires an ISOC90 compiler and relies on consistent behavior of sizeof. + */ +typedef size_t png_size_t; +typedef ptrdiff_t png_ptrdiff_t; + +/* libpng needs to know the maximum value of 'size_t' and this controls the + * definition of png_alloc_size_t, below. This maximum value of size_t limits + * but does not control the maximum allocations the library makes - there is + * direct application control of this through png_set_user_limits(). + */ +#ifndef PNG_SMALL_SIZE_T + /* Compiler specific tests for systems where size_t is known to be less than + * 32 bits (some of these systems may no longer work because of the lack of + * 'far' support; see above.) + */ +# if (defined(__TURBOC__) && !defined(__FLAT__)) ||\ + (defined(_MSC_VER) && defined(MAXSEG_64K)) +# define PNG_SMALL_SIZE_T +# endif +#endif + +/* png_alloc_size_t is guaranteed to be no smaller than png_size_t, and no + * smaller than png_uint_32. Casts from png_size_t or png_uint_32 to + * png_alloc_size_t are not necessary; in fact, it is recommended not to use + * them at all so that the compiler can complain when something turns out to be + * problematic. + * + * Casts in the other direction (from png_alloc_size_t to png_size_t or + * png_uint_32) should be explicitly applied; however, we do not expect to + * encounter practical situations that require such conversions. + * + * PNG_SMALL_SIZE_T must be defined if the maximum value of size_t is less than + * 4294967295 - i.e. less than the maximum value of png_uint_32. + */ +#ifdef PNG_SMALL_SIZE_T + typedef png_uint_32 png_alloc_size_t; +#else + typedef png_size_t png_alloc_size_t; +#endif + +/* Prior to 1.6.0 libpng offered limited support for Microsoft C compiler + * implementations of Intel CPU specific support of user-mode segmented address + * spaces, where 16-bit pointers address more than 65536 bytes of memory using + * separate 'segment' registers. The implementation requires two different + * types of pointer (only one of which includes the segment value.) + * + * If required this support is available in version 1.2 of libpng and may be + * available in versions through 1.5, although the correctness of the code has + * not been verified recently. + */ + +/* Typedef for floating-point numbers that are converted to fixed-point with a + * multiple of 100,000, e.g., gamma + */ +typedef png_int_32 png_fixed_point; + +/* Add typedefs for pointers */ +typedef void * png_voidp; +typedef const void * png_const_voidp; +typedef png_byte * png_bytep; +typedef const png_byte * png_const_bytep; +typedef png_uint_32 * png_uint_32p; +typedef const png_uint_32 * png_const_uint_32p; +typedef png_int_32 * png_int_32p; +typedef const png_int_32 * png_const_int_32p; +typedef png_uint_16 * png_uint_16p; +typedef const png_uint_16 * png_const_uint_16p; +typedef png_int_16 * png_int_16p; +typedef const png_int_16 * png_const_int_16p; +typedef char * png_charp; +typedef const char * png_const_charp; +typedef png_fixed_point * png_fixed_point_p; +typedef const png_fixed_point * png_const_fixed_point_p; +typedef png_size_t * png_size_tp; +typedef const png_size_t * png_const_size_tp; + +#ifdef PNG_STDIO_SUPPORTED +typedef FILE * png_FILE_p; +#endif + +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * png_doublep; +typedef const double * png_const_doublep; +#endif + +/* Pointers to pointers; i.e. arrays */ +typedef png_byte * * png_bytepp; +typedef png_uint_32 * * png_uint_32pp; +typedef png_int_32 * * png_int_32pp; +typedef png_uint_16 * * png_uint_16pp; +typedef png_int_16 * * png_int_16pp; +typedef const char * * png_const_charpp; +typedef char * * png_charpp; +typedef png_fixed_point * * png_fixed_point_pp; +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * * png_doublepp; +#endif + +/* Pointers to pointers to pointers; i.e., pointer to array */ +typedef char * * * png_charppp; + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +#endif /* PNGCONF_H */ diff --git a/src/SDL2/external/libpng-1.6.2/pngdebug.h b/src/SDL2/external/libpng-1.6.2/pngdebug.h new file mode 100644 index 000000000..16f81fdd1 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngdebug.h @@ -0,0 +1,157 @@ + +/* pngdebug.h - Debugging macros for libpng, also used in pngtest.c + * + * Copyright (c) 1998-2011 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * Last changed in libpng 1.5.0 [January 6, 2011] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +/* Define PNG_DEBUG at compile time for debugging information. Higher + * numbers for PNG_DEBUG mean more debugging information. This has + * only been added since version 0.95 so it is not implemented throughout + * libpng yet, but more support will be added as needed. + * + * png_debug[1-2]?(level, message ,arg{0-2}) + * Expands to a statement (either a simple expression or a compound + * do..while(0) statement) that outputs a message with parameter + * substitution if PNG_DEBUG is defined to 2 or more. If PNG_DEBUG + * is undefined, 0 or 1 every png_debug expands to a simple expression + * (actually ((void)0)). + * + * level: level of detail of message, starting at 0. A level 'n' + * message is preceded by 'n' tab characters (not implemented + * on Microsoft compilers unless PNG_DEBUG_FILE is also + * defined, to allow debug DLL compilation with no standard IO). + * message: a printf(3) style text string. A trailing '\n' is added + * to the message. + * arg: 0 to 2 arguments for printf(3) style substitution in message. + */ +#ifndef PNGDEBUG_H +#define PNGDEBUG_H +/* These settings control the formatting of messages in png.c and pngerror.c */ +/* Moved to pngdebug.h at 1.5.0 */ +# ifndef PNG_LITERAL_SHARP +# define PNG_LITERAL_SHARP 0x23 +# endif +# ifndef PNG_LITERAL_LEFT_SQUARE_BRACKET +# define PNG_LITERAL_LEFT_SQUARE_BRACKET 0x5b +# endif +# ifndef PNG_LITERAL_RIGHT_SQUARE_BRACKET +# define PNG_LITERAL_RIGHT_SQUARE_BRACKET 0x5d +# endif +# ifndef PNG_STRING_NEWLINE +# define PNG_STRING_NEWLINE "\n" +# endif + +#ifdef PNG_DEBUG +# if (PNG_DEBUG > 0) +# if !defined(PNG_DEBUG_FILE) && defined(_MSC_VER) +# include +# if (PNG_DEBUG > 1) +# ifndef _DEBUG +# define _DEBUG +# endif +# ifndef png_debug +# define png_debug(l,m) _RPT0(_CRT_WARN,m PNG_STRING_NEWLINE) +# endif +# ifndef png_debug1 +# define png_debug1(l,m,p1) _RPT1(_CRT_WARN,m PNG_STRING_NEWLINE,p1) +# endif +# ifndef png_debug2 +# define png_debug2(l,m,p1,p2) \ + _RPT2(_CRT_WARN,m PNG_STRING_NEWLINE,p1,p2) +# endif +# endif +# else /* PNG_DEBUG_FILE || !_MSC_VER */ +# ifndef PNG_STDIO_SUPPORTED +# include /* not included yet */ +# endif +# ifndef PNG_DEBUG_FILE +# define PNG_DEBUG_FILE stderr +# endif /* PNG_DEBUG_FILE */ + +# if (PNG_DEBUG > 1) +/* Note: ["%s"m PNG_STRING_NEWLINE] probably does not work on + * non-ISO compilers + */ +# ifdef __STDC__ +# ifndef png_debug +# define png_debug(l,m) \ + do { \ + int num_tabs=l; \ + fprintf(PNG_DEBUG_FILE,"%s"m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \ + (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":"")))); \ + } while (0) +# endif +# ifndef png_debug1 +# define png_debug1(l,m,p1) \ + do { \ + int num_tabs=l; \ + fprintf(PNG_DEBUG_FILE,"%s"m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \ + (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))),p1); \ + } while (0) +# endif +# ifndef png_debug2 +# define png_debug2(l,m,p1,p2) \ + do { \ + int num_tabs=l; \ + fprintf(PNG_DEBUG_FILE,"%s"m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \ + (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))),p1,p2); \ + } while (0) +# endif +# else /* __STDC __ */ +# ifndef png_debug +# define png_debug(l,m) \ + do { \ + int num_tabs=l; \ + char format[256]; \ + snprintf(format,256,"%s%s%s",(num_tabs==1 ? "\t" : \ + (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))), \ + m,PNG_STRING_NEWLINE); \ + fprintf(PNG_DEBUG_FILE,format); \ + } while (0) +# endif +# ifndef png_debug1 +# define png_debug1(l,m,p1) \ + do { \ + int num_tabs=l; \ + char format[256]; \ + snprintf(format,256,"%s%s%s",(num_tabs==1 ? "\t" : \ + (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))), \ + m,PNG_STRING_NEWLINE); \ + fprintf(PNG_DEBUG_FILE,format,p1); \ + } while (0) +# endif +# ifndef png_debug2 +# define png_debug2(l,m,p1,p2) \ + do { \ + int num_tabs=l; \ + char format[256]; \ + snprintf(format,256,"%s%s%s",(num_tabs==1 ? "\t" : \ + (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))), \ + m,PNG_STRING_NEWLINE); \ + fprintf(PNG_DEBUG_FILE,format,p1,p2); \ + } while (0) +# endif +# endif /* __STDC __ */ +# endif /* (PNG_DEBUG > 1) */ + +# endif /* _MSC_VER */ +# endif /* (PNG_DEBUG > 0) */ +#endif /* PNG_DEBUG */ +#ifndef png_debug +# define png_debug(l, m) ((void)0) +#endif +#ifndef png_debug1 +# define png_debug1(l, m, p1) ((void)0) +#endif +#ifndef png_debug2 +# define png_debug2(l, m, p1, p2) ((void)0) +#endif +#endif /* PNGDEBUG_H */ diff --git a/src/SDL2/external/libpng-1.6.2/pngerror.c b/src/SDL2/external/libpng-1.6.2/pngerror.c new file mode 100644 index 000000000..f469206ee --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngerror.c @@ -0,0 +1,932 @@ + +/* pngerror.c - stub functions for i/o and memory allocation + * + * Last changed in libpng 1.6.1 [March 28, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * This file provides a location for all error handling. Users who + * need special error handling are expected to write replacement functions + * and use png_set_error_fn() to use those functions. See the instructions + * at each function. + */ + +#include "pngpriv.h" + +#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) + +static PNG_FUNCTION(void, png_default_error,PNGARG((png_const_structrp png_ptr, + png_const_charp error_message)),PNG_NORETURN); + +#ifdef PNG_WARNINGS_SUPPORTED +static void /* PRIVATE */ +png_default_warning PNGARG((png_const_structrp png_ptr, + png_const_charp warning_message)); +#endif /* PNG_WARNINGS_SUPPORTED */ + +/* This function is called whenever there is a fatal error. This function + * should not be changed. If there is a need to handle errors differently, + * you should supply a replacement error function and use png_set_error_fn() + * to replace the error function at run-time. + */ +#ifdef PNG_ERROR_TEXT_SUPPORTED +PNG_FUNCTION(void,PNGAPI +png_error,(png_const_structrp png_ptr, png_const_charp error_message), + PNG_NORETURN) +{ +#ifdef PNG_ERROR_NUMBERS_SUPPORTED + char msg[16]; + if (png_ptr != NULL) + { + if (png_ptr->flags& + (PNG_FLAG_STRIP_ERROR_NUMBERS|PNG_FLAG_STRIP_ERROR_TEXT)) + { + if (*error_message == PNG_LITERAL_SHARP) + { + /* Strip "#nnnn " from beginning of error message. */ + int offset; + for (offset = 1; offset<15; offset++) + if (error_message[offset] == ' ') + break; + + if (png_ptr->flags&PNG_FLAG_STRIP_ERROR_TEXT) + { + int i; + for (i = 0; i < offset - 1; i++) + msg[i] = error_message[i + 1]; + msg[i - 1] = '\0'; + error_message = msg; + } + + else + error_message += offset; + } + + else + { + if (png_ptr->flags&PNG_FLAG_STRIP_ERROR_TEXT) + { + msg[0] = '0'; + msg[1] = '\0'; + error_message = msg; + } + } + } + } +#endif + if (png_ptr != NULL && png_ptr->error_fn != NULL) + (*(png_ptr->error_fn))(png_constcast(png_structrp,png_ptr), + error_message); + + /* If the custom handler doesn't exist, or if it returns, + use the default handler, which will not return. */ + png_default_error(png_ptr, error_message); +} +#else +PNG_FUNCTION(void,PNGAPI +png_err,(png_const_structrp png_ptr),PNG_NORETURN) +{ + /* Prior to 1.5.2 the error_fn received a NULL pointer, expressed + * erroneously as '\0', instead of the empty string "". This was + * apparently an error, introduced in libpng-1.2.20, and png_default_error + * will crash in this case. + */ + if (png_ptr != NULL && png_ptr->error_fn != NULL) + (*(png_ptr->error_fn))(png_constcast(png_structrp,png_ptr), ""); + + /* If the custom handler doesn't exist, or if it returns, + use the default handler, which will not return. */ + png_default_error(png_ptr, ""); +} +#endif /* PNG_ERROR_TEXT_SUPPORTED */ + +/* Utility to safely appends strings to a buffer. This never errors out so + * error checking is not required in the caller. + */ +size_t +png_safecat(png_charp buffer, size_t bufsize, size_t pos, + png_const_charp string) +{ + if (buffer != NULL && pos < bufsize) + { + if (string != NULL) + while (*string != '\0' && pos < bufsize-1) + buffer[pos++] = *string++; + + buffer[pos] = '\0'; + } + + return pos; +} + +#if defined(PNG_WARNINGS_SUPPORTED) || defined(PNG_TIME_RFC1123_SUPPORTED) +/* Utility to dump an unsigned value into a buffer, given a start pointer and + * and end pointer (which should point just *beyond* the end of the buffer!) + * Returns the pointer to the start of the formatted string. + */ +png_charp +png_format_number(png_const_charp start, png_charp end, int format, + png_alloc_size_t number) +{ + int count = 0; /* number of digits output */ + int mincount = 1; /* minimum number required */ + int output = 0; /* digit output (for the fixed point format) */ + + *--end = '\0'; + + /* This is written so that the loop always runs at least once, even with + * number zero. + */ + while (end > start && (number != 0 || count < mincount)) + { + + static const char digits[] = "0123456789ABCDEF"; + + switch (format) + { + case PNG_NUMBER_FORMAT_fixed: + /* Needs five digits (the fraction) */ + mincount = 5; + if (output || number % 10 != 0) + { + *--end = digits[number % 10]; + output = 1; + } + number /= 10; + break; + + case PNG_NUMBER_FORMAT_02u: + /* Expects at least 2 digits. */ + mincount = 2; + /* FALL THROUGH */ + + case PNG_NUMBER_FORMAT_u: + *--end = digits[number % 10]; + number /= 10; + break; + + case PNG_NUMBER_FORMAT_02x: + /* This format expects at least two digits */ + mincount = 2; + /* FALL THROUGH */ + + case PNG_NUMBER_FORMAT_x: + *--end = digits[number & 0xf]; + number >>= 4; + break; + + default: /* an error */ + number = 0; + break; + } + + /* Keep track of the number of digits added */ + ++count; + + /* Float a fixed number here: */ + if (format == PNG_NUMBER_FORMAT_fixed) if (count == 5) if (end > start) + { + /* End of the fraction, but maybe nothing was output? In that case + * drop the decimal point. If the number is a true zero handle that + * here. + */ + if (output) + *--end = '.'; + else if (number == 0) /* and !output */ + *--end = '0'; + } + } + + return end; +} +#endif + +#ifdef PNG_WARNINGS_SUPPORTED +/* This function is called whenever there is a non-fatal error. This function + * should not be changed. If there is a need to handle warnings differently, + * you should supply a replacement warning function and use + * png_set_error_fn() to replace the warning function at run-time. + */ +void PNGAPI +png_warning(png_const_structrp png_ptr, png_const_charp warning_message) +{ + int offset = 0; + if (png_ptr != NULL) + { +#ifdef PNG_ERROR_NUMBERS_SUPPORTED + if (png_ptr->flags& + (PNG_FLAG_STRIP_ERROR_NUMBERS|PNG_FLAG_STRIP_ERROR_TEXT)) +#endif + { + if (*warning_message == PNG_LITERAL_SHARP) + { + for (offset = 1; offset < 15; offset++) + if (warning_message[offset] == ' ') + break; + } + } + } + if (png_ptr != NULL && png_ptr->warning_fn != NULL) + (*(png_ptr->warning_fn))(png_constcast(png_structrp,png_ptr), + warning_message + offset); + else + png_default_warning(png_ptr, warning_message + offset); +} + +/* These functions support 'formatted' warning messages with up to + * PNG_WARNING_PARAMETER_COUNT parameters. In the format string the parameter + * is introduced by @, where 'number' starts at 1. This follows the + * standard established by X/Open for internationalizable error messages. + */ +void +png_warning_parameter(png_warning_parameters p, int number, + png_const_charp string) +{ + if (number > 0 && number <= PNG_WARNING_PARAMETER_COUNT) + (void)png_safecat(p[number-1], (sizeof p[number-1]), 0, string); +} + +void +png_warning_parameter_unsigned(png_warning_parameters p, int number, int format, + png_alloc_size_t value) +{ + char buffer[PNG_NUMBER_BUFFER_SIZE]; + png_warning_parameter(p, number, PNG_FORMAT_NUMBER(buffer, format, value)); +} + +void +png_warning_parameter_signed(png_warning_parameters p, int number, int format, + png_int_32 value) +{ + png_alloc_size_t u; + png_charp str; + char buffer[PNG_NUMBER_BUFFER_SIZE]; + + /* Avoid overflow by doing the negate in a png_alloc_size_t: */ + u = (png_alloc_size_t)value; + if (value < 0) + u = ~u + 1; + + str = PNG_FORMAT_NUMBER(buffer, format, u); + + if (value < 0 && str > buffer) + *--str = '-'; + + png_warning_parameter(p, number, str); +} + +void +png_formatted_warning(png_const_structrp png_ptr, png_warning_parameters p, + png_const_charp message) +{ + /* The internal buffer is just 192 bytes - enough for all our messages, + * overflow doesn't happen because this code checks! If someone figures + * out how to send us a message longer than 192 bytes, all that will + * happen is that the message will be truncated appropriately. + */ + size_t i = 0; /* Index in the msg[] buffer: */ + char msg[192]; + + /* Each iteration through the following loop writes at most one character + * to msg[i++] then returns here to validate that there is still space for + * the trailing '\0'. It may (in the case of a parameter) read more than + * one character from message[]; it must check for '\0' and continue to the + * test if it finds the end of string. + */ + while (i<(sizeof msg)-1 && *message != '\0') + { + /* '@' at end of string is now just printed (previously it was skipped); + * it is an error in the calling code to terminate the string with @. + */ + if (p != NULL && *message == '@' && message[1] != '\0') + { + int parameter_char = *++message; /* Consume the '@' */ + static const char valid_parameters[] = "123456789"; + int parameter = 0; + + /* Search for the parameter digit, the index in the string is the + * parameter to use. + */ + while (valid_parameters[parameter] != parameter_char && + valid_parameters[parameter] != '\0') + ++parameter; + + /* If the parameter digit is out of range it will just get printed. */ + if (parameter < PNG_WARNING_PARAMETER_COUNT) + { + /* Append this parameter */ + png_const_charp parm = p[parameter]; + png_const_charp pend = p[parameter] + (sizeof p[parameter]); + + /* No need to copy the trailing '\0' here, but there is no guarantee + * that parm[] has been initialized, so there is no guarantee of a + * trailing '\0': + */ + while (i<(sizeof msg)-1 && *parm != '\0' && parm < pend) + msg[i++] = *parm++; + + /* Consume the parameter digit too: */ + ++message; + continue; + } + + /* else not a parameter and there is a character after the @ sign; just + * copy that. This is known not to be '\0' because of the test above. + */ + } + + /* At this point *message can't be '\0', even in the bad parameter case + * above where there is a lone '@' at the end of the message string. + */ + msg[i++] = *message++; + } + + /* i is always less than (sizeof msg), so: */ + msg[i] = '\0'; + + /* And this is the formatted message. It may be larger than + * PNG_MAX_ERROR_TEXT, but that is only used for 'chunk' errors and these + * are not (currently) formatted. + */ + png_warning(png_ptr, msg); +} +#endif /* PNG_WARNINGS_SUPPORTED */ + +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +void PNGAPI +png_benign_error(png_const_structrp png_ptr, png_const_charp error_message) +{ + if (png_ptr->flags & PNG_FLAG_BENIGN_ERRORS_WARN) + { +# ifdef PNG_READ_SUPPORTED + if ((png_ptr->mode & PNG_IS_READ_STRUCT) != 0 && + png_ptr->chunk_name != 0) + png_chunk_warning(png_ptr, error_message); + else +# endif + png_warning(png_ptr, error_message); + } + + else + { +# ifdef PNG_READ_SUPPORTED + if ((png_ptr->mode & PNG_IS_READ_STRUCT) != 0 && + png_ptr->chunk_name != 0) + png_chunk_error(png_ptr, error_message); + else +# endif + png_error(png_ptr, error_message); + } +} + +void /* PRIVATE */ +png_app_warning(png_const_structrp png_ptr, png_const_charp error_message) +{ + if (png_ptr->flags & PNG_FLAG_APP_WARNINGS_WARN) + png_warning(png_ptr, error_message); + else + png_error(png_ptr, error_message); +} + +void /* PRIVATE */ +png_app_error(png_const_structrp png_ptr, png_const_charp error_message) +{ + if (png_ptr->flags & PNG_FLAG_APP_ERRORS_WARN) + png_warning(png_ptr, error_message); + else + png_error(png_ptr, error_message); +} +#endif /* BENIGN_ERRORS */ + +/* These utilities are used internally to build an error message that relates + * to the current chunk. The chunk name comes from png_ptr->chunk_name, + * this is used to prefix the message. The message is limited in length + * to 63 bytes, the name characters are output as hex digits wrapped in [] + * if the character is invalid. + */ +#define isnonalpha(c) ((c) < 65 || (c) > 122 || ((c) > 90 && (c) < 97)) +static PNG_CONST char png_digit[16] = { + '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', + 'A', 'B', 'C', 'D', 'E', 'F' +}; + +#define PNG_MAX_ERROR_TEXT 196 /* Currently limited be profile_error in png.c */ +#if defined(PNG_WARNINGS_SUPPORTED) || defined(PNG_ERROR_TEXT_SUPPORTED) +static void /* PRIVATE */ +png_format_buffer(png_const_structrp png_ptr, png_charp buffer, png_const_charp + error_message) +{ + png_uint_32 chunk_name = png_ptr->chunk_name; + int iout = 0, ishift = 24; + + while (ishift >= 0) + { + int c = (int)(chunk_name >> ishift) & 0xff; + + ishift -= 8; + if (isnonalpha(c)) + { + buffer[iout++] = PNG_LITERAL_LEFT_SQUARE_BRACKET; + buffer[iout++] = png_digit[(c & 0xf0) >> 4]; + buffer[iout++] = png_digit[c & 0x0f]; + buffer[iout++] = PNG_LITERAL_RIGHT_SQUARE_BRACKET; + } + + else + { + buffer[iout++] = (char)c; + } + } + + if (error_message == NULL) + buffer[iout] = '\0'; + + else + { + int iin = 0; + + buffer[iout++] = ':'; + buffer[iout++] = ' '; + + while (iin < PNG_MAX_ERROR_TEXT-1 && error_message[iin] != '\0') + buffer[iout++] = error_message[iin++]; + + /* iin < PNG_MAX_ERROR_TEXT, so the following is safe: */ + buffer[iout] = '\0'; + } +} +#endif /* PNG_WARNINGS_SUPPORTED || PNG_ERROR_TEXT_SUPPORTED */ + +#if defined(PNG_READ_SUPPORTED) && defined(PNG_ERROR_TEXT_SUPPORTED) +PNG_FUNCTION(void,PNGAPI +png_chunk_error,(png_const_structrp png_ptr, png_const_charp error_message), + PNG_NORETURN) +{ + char msg[18+PNG_MAX_ERROR_TEXT]; + if (png_ptr == NULL) + png_error(png_ptr, error_message); + + else + { + png_format_buffer(png_ptr, msg, error_message); + png_error(png_ptr, msg); + } +} +#endif /* PNG_READ_SUPPORTED && PNG_ERROR_TEXT_SUPPORTED */ + +#ifdef PNG_WARNINGS_SUPPORTED +void PNGAPI +png_chunk_warning(png_const_structrp png_ptr, png_const_charp warning_message) +{ + char msg[18+PNG_MAX_ERROR_TEXT]; + if (png_ptr == NULL) + png_warning(png_ptr, warning_message); + + else + { + png_format_buffer(png_ptr, msg, warning_message); + png_warning(png_ptr, msg); + } +} +#endif /* PNG_WARNINGS_SUPPORTED */ + +#ifdef PNG_READ_SUPPORTED +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +void PNGAPI +png_chunk_benign_error(png_const_structrp png_ptr, png_const_charp + error_message) +{ + if (png_ptr->flags & PNG_FLAG_BENIGN_ERRORS_WARN) + png_chunk_warning(png_ptr, error_message); + + else + png_chunk_error(png_ptr, error_message); +} +#endif +#endif /* PNG_READ_SUPPORTED */ + +void /* PRIVATE */ +png_chunk_report(png_const_structrp png_ptr, png_const_charp message, int error) +{ + /* This is always supported, but for just read or just write it + * unconditionally does the right thing. + */ +# if defined(PNG_READ_SUPPORTED) && defined(PNG_WRITE_SUPPORTED) + if (png_ptr->mode & PNG_IS_READ_STRUCT) +# endif + +# ifdef PNG_READ_SUPPORTED + { + if (error < PNG_CHUNK_ERROR) + png_chunk_warning(png_ptr, message); + + else + png_chunk_benign_error(png_ptr, message); + } +# endif + +# if defined(PNG_READ_SUPPORTED) && defined(PNG_WRITE_SUPPORTED) + else if (!(png_ptr->mode & PNG_IS_READ_STRUCT)) +# endif + +# ifdef PNG_WRITE_SUPPORTED + { + if (error < PNG_CHUNK_WRITE_ERROR) + png_app_warning(png_ptr, message); + + else + png_app_error(png_ptr, message); + } +# endif +} + +#ifdef PNG_ERROR_TEXT_SUPPORTED +#ifdef PNG_FLOATING_POINT_SUPPORTED +PNG_FUNCTION(void, +png_fixed_error,(png_const_structrp png_ptr, png_const_charp name),PNG_NORETURN) +{ +# define fixed_message "fixed point overflow in " +# define fixed_message_ln ((sizeof fixed_message)-1) + int iin; + char msg[fixed_message_ln+PNG_MAX_ERROR_TEXT]; + memcpy(msg, fixed_message, fixed_message_ln); + iin = 0; + if (name != NULL) while (iin < (PNG_MAX_ERROR_TEXT-1) && name[iin] != 0) + { + msg[fixed_message_ln + iin] = name[iin]; + ++iin; + } + msg[fixed_message_ln + iin] = 0; + png_error(png_ptr, msg); +} +#endif +#endif + +#ifdef PNG_SETJMP_SUPPORTED +/* This API only exists if ANSI-C style error handling is used, + * otherwise it is necessary for png_default_error to be overridden. + */ +jmp_buf* PNGAPI +png_set_longjmp_fn(png_structrp png_ptr, png_longjmp_ptr longjmp_fn, + size_t jmp_buf_size) +{ + /* From libpng 1.6.0 the app gets one chance to set a 'jmpbuf_size' value + * and it must not change after that. Libpng doesn't care how big the + * buffer is, just that it doesn't change. + * + * If the buffer size is no *larger* than the size of jmp_buf when libpng is + * compiled a built in jmp_buf is returned; this preserves the pre-1.6.0 + * semantics that this call will not fail. If the size is larger, however, + * the buffer is allocated and this may fail, causing the function to return + * NULL. + */ + if (png_ptr == NULL) + return NULL; + + if (png_ptr->jmp_buf_ptr == NULL) + { + png_ptr->jmp_buf_size = 0; /* not allocated */ + + if (jmp_buf_size <= (sizeof png_ptr->jmp_buf_local)) + png_ptr->jmp_buf_ptr = &png_ptr->jmp_buf_local; + + else + { + png_ptr->jmp_buf_ptr = png_voidcast(jmp_buf *, + png_malloc_warn(png_ptr, jmp_buf_size)); + + if (png_ptr->jmp_buf_ptr == NULL) + return NULL; /* new NULL return on OOM */ + + png_ptr->jmp_buf_size = jmp_buf_size; + } + } + + else /* Already allocated: check the size */ + { + size_t size = png_ptr->jmp_buf_size; + + if (size == 0) + { + size = (sizeof png_ptr->jmp_buf_local); + if (png_ptr->jmp_buf_ptr != &png_ptr->jmp_buf_local) + { + /* This is an internal error in libpng: somehow we have been left + * with a stack allocated jmp_buf when the application regained + * control. It's always possible to fix this up, but for the moment + * this is a png_error because that makes it easy to detect. + */ + png_error(png_ptr, "Libpng jmp_buf still allocated"); + /* png_ptr->jmp_buf_ptr = &png_ptr->jmp_buf_local; */ + } + } + + if (size != jmp_buf_size) + { + png_warning(png_ptr, "Application jmp_buf size changed"); + return NULL; /* caller will probably crash: no choice here */ + } + } + + /* Finally fill in the function, now we have a satisfactory buffer. It is + * valid to change the function on every call. + */ + png_ptr->longjmp_fn = longjmp_fn; + return png_ptr->jmp_buf_ptr; +} + +void /* PRIVATE */ +png_free_jmpbuf(png_structrp png_ptr) +{ + if (png_ptr != NULL) + { + jmp_buf *jb = png_ptr->jmp_buf_ptr; + + /* A size of 0 is used to indicate a local, stack, allocation of the + * pointer; used here and in png.c + */ + if (jb != NULL && png_ptr->jmp_buf_size > 0) + { + + /* This stuff is so that a failure to free the error control structure + * does not leave libpng in a state with no valid error handling: the + * free always succeeds, if there is an error it gets ignored. + */ + if (jb != &png_ptr->jmp_buf_local) + { + /* Make an internal, libpng, jmp_buf to return here */ + jmp_buf free_jmp_buf; + + if (!setjmp(free_jmp_buf)) + { + png_ptr->jmp_buf_ptr = &free_jmp_buf; /* come back here */ + png_ptr->jmp_buf_size = 0; /* stack allocation */ + png_ptr->longjmp_fn = longjmp; + png_free(png_ptr, jb); /* Return to setjmp on error */ + } + } + } + + /* *Always* cancel everything out: */ + png_ptr->jmp_buf_size = 0; + png_ptr->jmp_buf_ptr = NULL; + png_ptr->longjmp_fn = 0; + } +} +#endif + +/* This is the default error handling function. Note that replacements for + * this function MUST NOT RETURN, or the program will likely crash. This + * function is used by default, or if the program supplies NULL for the + * error function pointer in png_set_error_fn(). + */ +static PNG_FUNCTION(void /* PRIVATE */, +png_default_error,(png_const_structrp png_ptr, png_const_charp error_message), + PNG_NORETURN) +{ +#ifdef PNG_CONSOLE_IO_SUPPORTED +#ifdef PNG_ERROR_NUMBERS_SUPPORTED + /* Check on NULL only added in 1.5.4 */ + if (error_message != NULL && *error_message == PNG_LITERAL_SHARP) + { + /* Strip "#nnnn " from beginning of error message. */ + int offset; + char error_number[16]; + for (offset = 0; offset<15; offset++) + { + error_number[offset] = error_message[offset + 1]; + if (error_message[offset] == ' ') + break; + } + + if ((offset > 1) && (offset < 15)) + { + error_number[offset - 1] = '\0'; + fprintf(stderr, "libpng error no. %s: %s", + error_number, error_message + offset + 1); + fprintf(stderr, PNG_STRING_NEWLINE); + } + + else + { + fprintf(stderr, "libpng error: %s, offset=%d", + error_message, offset); + fprintf(stderr, PNG_STRING_NEWLINE); + } + } + else +#endif + { + fprintf(stderr, "libpng error: %s", error_message ? error_message : + "undefined"); + fprintf(stderr, PNG_STRING_NEWLINE); + } +#else + PNG_UNUSED(error_message) /* Make compiler happy */ +#endif + png_longjmp(png_ptr, 1); +} + +PNG_FUNCTION(void,PNGAPI +png_longjmp,(png_const_structrp png_ptr, int val),PNG_NORETURN) +{ +#ifdef PNG_SETJMP_SUPPORTED + if (png_ptr && png_ptr->longjmp_fn && png_ptr->jmp_buf_ptr) + png_ptr->longjmp_fn(*png_ptr->jmp_buf_ptr, val); +#endif + + /* Here if not setjmp support or if png_ptr is null. */ + PNG_ABORT(); +} + +#ifdef PNG_WARNINGS_SUPPORTED +/* This function is called when there is a warning, but the library thinks + * it can continue anyway. Replacement functions don't have to do anything + * here if you don't want them to. In the default configuration, png_ptr is + * not used, but it is passed in case it may be useful. + */ +static void /* PRIVATE */ +png_default_warning(png_const_structrp png_ptr, png_const_charp warning_message) +{ +#ifdef PNG_CONSOLE_IO_SUPPORTED +# ifdef PNG_ERROR_NUMBERS_SUPPORTED + if (*warning_message == PNG_LITERAL_SHARP) + { + int offset; + char warning_number[16]; + for (offset = 0; offset < 15; offset++) + { + warning_number[offset] = warning_message[offset + 1]; + if (warning_message[offset] == ' ') + break; + } + + if ((offset > 1) && (offset < 15)) + { + warning_number[offset + 1] = '\0'; + fprintf(stderr, "libpng warning no. %s: %s", + warning_number, warning_message + offset); + fprintf(stderr, PNG_STRING_NEWLINE); + } + + else + { + fprintf(stderr, "libpng warning: %s", + warning_message); + fprintf(stderr, PNG_STRING_NEWLINE); + } + } + else +# endif + + { + fprintf(stderr, "libpng warning: %s", warning_message); + fprintf(stderr, PNG_STRING_NEWLINE); + } +#else + PNG_UNUSED(warning_message) /* Make compiler happy */ +#endif + PNG_UNUSED(png_ptr) /* Make compiler happy */ +} +#endif /* PNG_WARNINGS_SUPPORTED */ + +/* This function is called when the application wants to use another method + * of handling errors and warnings. Note that the error function MUST NOT + * return to the calling routine or serious problems will occur. The return + * method used in the default routine calls longjmp(png_ptr->jmp_buf_ptr, 1) + */ +void PNGAPI +png_set_error_fn(png_structrp png_ptr, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warning_fn) +{ + if (png_ptr == NULL) + return; + + png_ptr->error_ptr = error_ptr; + png_ptr->error_fn = error_fn; +#ifdef PNG_WARNINGS_SUPPORTED + png_ptr->warning_fn = warning_fn; +#else + PNG_UNUSED(warning_fn) +#endif +} + + +/* This function returns a pointer to the error_ptr associated with the user + * functions. The application should free any memory associated with this + * pointer before png_write_destroy and png_read_destroy are called. + */ +png_voidp PNGAPI +png_get_error_ptr(png_const_structrp png_ptr) +{ + if (png_ptr == NULL) + return NULL; + + return ((png_voidp)png_ptr->error_ptr); +} + + +#ifdef PNG_ERROR_NUMBERS_SUPPORTED +void PNGAPI +png_set_strip_error_numbers(png_structrp png_ptr, png_uint_32 strip_mode) +{ + if (png_ptr != NULL) + { + png_ptr->flags &= + ((~(PNG_FLAG_STRIP_ERROR_NUMBERS | + PNG_FLAG_STRIP_ERROR_TEXT))&strip_mode); + } +} +#endif + +#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) ||\ + defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) + /* Currently the above both depend on SETJMP_SUPPORTED, however it would be + * possible to implement without setjmp support just so long as there is some + * way to handle the error return here: + */ +PNG_FUNCTION(void /* PRIVATE */, +png_safe_error,(png_structp png_nonconst_ptr, png_const_charp error_message), + PNG_NORETURN) +{ + const png_const_structrp png_ptr = png_nonconst_ptr; + png_imagep image = png_voidcast(png_imagep, png_ptr->error_ptr); + + /* An error is always logged here, overwriting anything (typically a warning) + * that is already there: + */ + if (image != NULL) + { + png_safecat(image->message, (sizeof image->message), 0, error_message); + image->warning_or_error |= PNG_IMAGE_ERROR; + + /* Retrieve the jmp_buf from within the png_control, making this work for + * C++ compilation too is pretty tricky: C++ wants a pointer to the first + * element of a jmp_buf, but C doesn't tell us the type of that. + */ + if (image->opaque != NULL && image->opaque->error_buf != NULL) + longjmp(png_control_jmp_buf(image->opaque), 1); + + /* Missing longjmp buffer, the following is to help debugging: */ + { + size_t pos = png_safecat(image->message, (sizeof image->message), 0, + "bad longjmp: "); + png_safecat(image->message, (sizeof image->message), pos, + error_message); + } + } + + /* Here on an internal programming error. */ + abort(); +} + +#ifdef PNG_WARNINGS_SUPPORTED +void /* PRIVATE */ +png_safe_warning(png_structp png_nonconst_ptr, png_const_charp warning_message) +{ + const png_const_structrp png_ptr = png_nonconst_ptr; + png_imagep image = png_voidcast(png_imagep, png_ptr->error_ptr); + + /* A warning is only logged if there is no prior warning or error. */ + if (image->warning_or_error == 0) + { + png_safecat(image->message, (sizeof image->message), 0, warning_message); + image->warning_or_error |= PNG_IMAGE_WARNING; + } +} +#endif + +int /* PRIVATE */ +png_safe_execute(png_imagep image_in, int (*function)(png_voidp), png_voidp arg) +{ + volatile png_imagep image = image_in; + volatile int result; + volatile png_voidp saved_error_buf; + jmp_buf safe_jmpbuf; + + /* Safely execute function(arg) with png_error returning to this function. */ + saved_error_buf = image->opaque->error_buf; + result = setjmp(safe_jmpbuf) == 0; + + if (result) + { + + image->opaque->error_buf = safe_jmpbuf; + result = function(arg); + } + + image->opaque->error_buf = saved_error_buf; + + /* And do the cleanup prior to any failure return. */ + if (!result) + png_image_free(image); + + return result; +} +#endif /* SIMPLIFIED READ/WRITE */ +#endif /* PNG_READ_SUPPORTED || PNG_WRITE_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngget.c b/src/SDL2/external/libpng-1.6.2/pngget.c new file mode 100644 index 000000000..aca63a958 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngget.c @@ -0,0 +1,1177 @@ + +/* pngget.c - retrieval of values from info struct + * + * Last changed in libpng 1.6.1 [March 28, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + */ + +#include "pngpriv.h" + +#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) + +png_uint_32 PNGAPI +png_get_valid(png_const_structrp png_ptr, png_const_inforp info_ptr, + png_uint_32 flag) +{ + if (png_ptr != NULL && info_ptr != NULL) + return(info_ptr->valid & flag); + + return(0); +} + +png_size_t PNGAPI +png_get_rowbytes(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return(info_ptr->rowbytes); + + return(0); +} + +#ifdef PNG_INFO_IMAGE_SUPPORTED +png_bytepp PNGAPI +png_get_rows(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return(info_ptr->row_pointers); + + return(0); +} +#endif + +#ifdef PNG_EASY_ACCESS_SUPPORTED +/* Easy access to info, added in libpng-0.99 */ +png_uint_32 PNGAPI +png_get_image_width(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return info_ptr->width; + + return (0); +} + +png_uint_32 PNGAPI +png_get_image_height(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return info_ptr->height; + + return (0); +} + +png_byte PNGAPI +png_get_bit_depth(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return info_ptr->bit_depth; + + return (0); +} + +png_byte PNGAPI +png_get_color_type(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return info_ptr->color_type; + + return (0); +} + +png_byte PNGAPI +png_get_filter_type(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return info_ptr->filter_type; + + return (0); +} + +png_byte PNGAPI +png_get_interlace_type(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return info_ptr->interlace_type; + + return (0); +} + +png_byte PNGAPI +png_get_compression_type(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return info_ptr->compression_type; + + return (0); +} + +png_uint_32 PNGAPI +png_get_x_pixels_per_meter(png_const_structrp png_ptr, png_const_inforp + info_ptr) +{ +#ifdef PNG_pHYs_SUPPORTED + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_pHYs)) + { + png_debug1(1, "in %s retrieval function", + "png_get_x_pixels_per_meter"); + + if (info_ptr->phys_unit_type == PNG_RESOLUTION_METER) + return (info_ptr->x_pixels_per_unit); + } +#endif + + return (0); +} + +png_uint_32 PNGAPI +png_get_y_pixels_per_meter(png_const_structrp png_ptr, png_const_inforp + info_ptr) +{ +#ifdef PNG_pHYs_SUPPORTED + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_pHYs)) + { + png_debug1(1, "in %s retrieval function", + "png_get_y_pixels_per_meter"); + + if (info_ptr->phys_unit_type == PNG_RESOLUTION_METER) + return (info_ptr->y_pixels_per_unit); + } +#endif + + return (0); +} + +png_uint_32 PNGAPI +png_get_pixels_per_meter(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ +#ifdef PNG_pHYs_SUPPORTED + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_pHYs)) + { + png_debug1(1, "in %s retrieval function", "png_get_pixels_per_meter"); + + if (info_ptr->phys_unit_type == PNG_RESOLUTION_METER && + info_ptr->x_pixels_per_unit == info_ptr->y_pixels_per_unit) + return (info_ptr->x_pixels_per_unit); + } +#endif + + return (0); +} + +#ifdef PNG_FLOATING_POINT_SUPPORTED +float PNGAPI +png_get_pixel_aspect_ratio(png_const_structrp png_ptr, png_const_inforp + info_ptr) +{ +#ifdef PNG_READ_pHYs_SUPPORTED + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_pHYs)) + { + png_debug1(1, "in %s retrieval function", "png_get_aspect_ratio"); + + if (info_ptr->x_pixels_per_unit != 0) + return ((float)((float)info_ptr->y_pixels_per_unit + /(float)info_ptr->x_pixels_per_unit)); + } +#else + PNG_UNUSED(png_ptr) + PNG_UNUSED(info_ptr) +#endif + + return ((float)0.0); +} +#endif + +#ifdef PNG_FIXED_POINT_SUPPORTED +png_fixed_point PNGAPI +png_get_pixel_aspect_ratio_fixed(png_const_structrp png_ptr, + png_const_inforp info_ptr) +{ +#ifdef PNG_READ_pHYs_SUPPORTED + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_pHYs) + && info_ptr->x_pixels_per_unit > 0 && info_ptr->y_pixels_per_unit > 0 + && info_ptr->x_pixels_per_unit <= PNG_UINT_31_MAX + && info_ptr->y_pixels_per_unit <= PNG_UINT_31_MAX) + { + png_fixed_point res; + + png_debug1(1, "in %s retrieval function", "png_get_aspect_ratio_fixed"); + + /* The following casts work because a PNG 4 byte integer only has a valid + * range of 0..2^31-1; otherwise the cast might overflow. + */ + if (png_muldiv(&res, (png_int_32)info_ptr->y_pixels_per_unit, PNG_FP_1, + (png_int_32)info_ptr->x_pixels_per_unit)) + return res; + } +#else + PNG_UNUSED(png_ptr) + PNG_UNUSED(info_ptr) +#endif + + return 0; +} +#endif + +png_int_32 PNGAPI +png_get_x_offset_microns(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ +#ifdef PNG_oFFs_SUPPORTED + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_oFFs)) + { + png_debug1(1, "in %s retrieval function", "png_get_x_offset_microns"); + + if (info_ptr->offset_unit_type == PNG_OFFSET_MICROMETER) + return (info_ptr->x_offset); + } +#endif + + return (0); +} + +png_int_32 PNGAPI +png_get_y_offset_microns(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ +#ifdef PNG_oFFs_SUPPORTED + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_oFFs)) + { + png_debug1(1, "in %s retrieval function", "png_get_y_offset_microns"); + + if (info_ptr->offset_unit_type == PNG_OFFSET_MICROMETER) + return (info_ptr->y_offset); + } +#endif + + return (0); +} + +png_int_32 PNGAPI +png_get_x_offset_pixels(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ +#ifdef PNG_oFFs_SUPPORTED + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_oFFs)) + { + png_debug1(1, "in %s retrieval function", "png_get_x_offset_pixels"); + + if (info_ptr->offset_unit_type == PNG_OFFSET_PIXEL) + return (info_ptr->x_offset); + } +#endif + + return (0); +} + +png_int_32 PNGAPI +png_get_y_offset_pixels(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ +#ifdef PNG_oFFs_SUPPORTED + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_oFFs)) + { + png_debug1(1, "in %s retrieval function", "png_get_y_offset_pixels"); + + if (info_ptr->offset_unit_type == PNG_OFFSET_PIXEL) + return (info_ptr->y_offset); + } +#endif + + return (0); +} + +#ifdef PNG_INCH_CONVERSIONS_SUPPORTED +static png_uint_32 +ppi_from_ppm(png_uint_32 ppm) +{ +#if 0 + /* The conversion is *(2.54/100), in binary (32 digits): + * .00000110100000001001110101001001 + */ + png_uint_32 t1001, t1101; + ppm >>= 1; /* .1 */ + t1001 = ppm + (ppm >> 3); /* .1001 */ + t1101 = t1001 + (ppm >> 1); /* .1101 */ + ppm >>= 20; /* .000000000000000000001 */ + t1101 += t1101 >> 15; /* .1101000000000001101 */ + t1001 >>= 11; /* .000000000001001 */ + t1001 += t1001 >> 12; /* .000000000001001000000001001 */ + ppm += t1001; /* .000000000001001000001001001 */ + ppm += t1101; /* .110100000001001110101001001 */ + return (ppm + 16) >> 5;/* .00000110100000001001110101001001 */ +#else + /* The argument is a PNG unsigned integer, so it is not permitted + * to be bigger than 2^31. + */ + png_fixed_point result; + if (ppm <= PNG_UINT_31_MAX && png_muldiv(&result, (png_int_32)ppm, 127, + 5000)) + return result; + + /* Overflow. */ + return 0; +#endif +} + +png_uint_32 PNGAPI +png_get_pixels_per_inch(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + return ppi_from_ppm(png_get_pixels_per_meter(png_ptr, info_ptr)); +} + +png_uint_32 PNGAPI +png_get_x_pixels_per_inch(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + return ppi_from_ppm(png_get_x_pixels_per_meter(png_ptr, info_ptr)); +} + +png_uint_32 PNGAPI +png_get_y_pixels_per_inch(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + return ppi_from_ppm(png_get_y_pixels_per_meter(png_ptr, info_ptr)); +} + +#ifdef PNG_FIXED_POINT_SUPPORTED +static png_fixed_point +png_fixed_inches_from_microns(png_const_structrp png_ptr, png_int_32 microns) +{ + /* Convert from metres * 1,000,000 to inches * 100,000, meters to + * inches is simply *(100/2.54), so we want *(10/2.54) == 500/127. + * Notice that this can overflow - a warning is output and 0 is + * returned. + */ + return png_muldiv_warn(png_ptr, microns, 500, 127); +} + +png_fixed_point PNGAPI +png_get_x_offset_inches_fixed(png_const_structrp png_ptr, + png_const_inforp info_ptr) +{ + return png_fixed_inches_from_microns(png_ptr, + png_get_x_offset_microns(png_ptr, info_ptr)); +} +#endif + +#ifdef PNG_FIXED_POINT_SUPPORTED +png_fixed_point PNGAPI +png_get_y_offset_inches_fixed(png_const_structrp png_ptr, + png_const_inforp info_ptr) +{ + return png_fixed_inches_from_microns(png_ptr, + png_get_y_offset_microns(png_ptr, info_ptr)); +} +#endif + +#ifdef PNG_FLOATING_POINT_SUPPORTED +float PNGAPI +png_get_x_offset_inches(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + /* To avoid the overflow do the conversion directly in floating + * point. + */ + return (float)(png_get_x_offset_microns(png_ptr, info_ptr) * .00003937); +} +#endif + +#ifdef PNG_FLOATING_POINT_SUPPORTED +float PNGAPI +png_get_y_offset_inches(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + /* To avoid the overflow do the conversion directly in floating + * point. + */ + return (float)(png_get_y_offset_microns(png_ptr, info_ptr) * .00003937); +} +#endif + +#ifdef PNG_pHYs_SUPPORTED +png_uint_32 PNGAPI +png_get_pHYs_dpi(png_const_structrp png_ptr, png_const_inforp info_ptr, + png_uint_32 *res_x, png_uint_32 *res_y, int *unit_type) +{ + png_uint_32 retval = 0; + + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_pHYs)) + { + png_debug1(1, "in %s retrieval function", "pHYs"); + + if (res_x != NULL) + { + *res_x = info_ptr->x_pixels_per_unit; + retval |= PNG_INFO_pHYs; + } + + if (res_y != NULL) + { + *res_y = info_ptr->y_pixels_per_unit; + retval |= PNG_INFO_pHYs; + } + + if (unit_type != NULL) + { + *unit_type = (int)info_ptr->phys_unit_type; + retval |= PNG_INFO_pHYs; + + if (*unit_type == 1) + { + if (res_x != NULL) *res_x = (png_uint_32)(*res_x * .0254 + .50); + if (res_y != NULL) *res_y = (png_uint_32)(*res_y * .0254 + .50); + } + } + } + + return (retval); +} +#endif /* PNG_pHYs_SUPPORTED */ +#endif /* PNG_INCH_CONVERSIONS_SUPPORTED */ + +/* png_get_channels really belongs in here, too, but it's been around longer */ + +#endif /* PNG_EASY_ACCESS_SUPPORTED */ + + +png_byte PNGAPI +png_get_channels(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return(info_ptr->channels); + + return (0); +} + +#ifdef PNG_READ_SUPPORTED +png_const_bytep PNGAPI +png_get_signature(png_const_structrp png_ptr, png_const_inforp info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return(info_ptr->signature); + + return (NULL); +} +#endif + +#ifdef PNG_bKGD_SUPPORTED +png_uint_32 PNGAPI +png_get_bKGD(png_const_structrp png_ptr, png_inforp info_ptr, + png_color_16p *background) +{ + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_bKGD) + && background != NULL) + { + png_debug1(1, "in %s retrieval function", "bKGD"); + + *background = &(info_ptr->background); + return (PNG_INFO_bKGD); + } + + return (0); +} +#endif + +#ifdef PNG_cHRM_SUPPORTED +/* The XYZ APIs were added in 1.5.5 to take advantage of the code added at the + * same time to correct the rgb grayscale coefficient defaults obtained from the + * cHRM chunk in 1.5.4 + */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +png_uint_32 PNGAPI +png_get_cHRM(png_const_structrp png_ptr, png_const_inforp info_ptr, + double *white_x, double *white_y, double *red_x, double *red_y, + double *green_x, double *green_y, double *blue_x, double *blue_y) +{ + /* Quiet API change: this code used to only return the end points if a cHRM + * chunk was present, but the end points can also come from iCCP or sRGB + * chunks, so in 1.6.0 the png_get_ APIs return the end points regardless and + * the png_set_ APIs merely check that set end points are mutually + * consistent. + */ + if (png_ptr != NULL && info_ptr != NULL && + (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS)) + { + png_debug1(1, "in %s retrieval function", "cHRM"); + + if (white_x != NULL) + *white_x = png_float(png_ptr, + info_ptr->colorspace.end_points_xy.whitex, "cHRM white X"); + if (white_y != NULL) + *white_y = png_float(png_ptr, + info_ptr->colorspace.end_points_xy.whitey, "cHRM white Y"); + if (red_x != NULL) + *red_x = png_float(png_ptr, info_ptr->colorspace.end_points_xy.redx, + "cHRM red X"); + if (red_y != NULL) + *red_y = png_float(png_ptr, info_ptr->colorspace.end_points_xy.redy, + "cHRM red Y"); + if (green_x != NULL) + *green_x = png_float(png_ptr, + info_ptr->colorspace.end_points_xy.greenx, "cHRM green X"); + if (green_y != NULL) + *green_y = png_float(png_ptr, + info_ptr->colorspace.end_points_xy.greeny, "cHRM green Y"); + if (blue_x != NULL) + *blue_x = png_float(png_ptr, info_ptr->colorspace.end_points_xy.bluex, + "cHRM blue X"); + if (blue_y != NULL) + *blue_y = png_float(png_ptr, info_ptr->colorspace.end_points_xy.bluey, + "cHRM blue Y"); + return (PNG_INFO_cHRM); + } + + return (0); +} + +png_uint_32 PNGAPI +png_get_cHRM_XYZ(png_const_structrp png_ptr, png_const_inforp info_ptr, + double *red_X, double *red_Y, double *red_Z, double *green_X, + double *green_Y, double *green_Z, double *blue_X, double *blue_Y, + double *blue_Z) +{ + if (png_ptr != NULL && info_ptr != NULL && + (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS)) + { + png_debug1(1, "in %s retrieval function", "cHRM_XYZ(float)"); + + if (red_X != NULL) + *red_X = png_float(png_ptr, info_ptr->colorspace.end_points_XYZ.red_X, + "cHRM red X"); + if (red_Y != NULL) + *red_Y = png_float(png_ptr, info_ptr->colorspace.end_points_XYZ.red_Y, + "cHRM red Y"); + if (red_Z != NULL) + *red_Z = png_float(png_ptr, info_ptr->colorspace.end_points_XYZ.red_Z, + "cHRM red Z"); + if (green_X != NULL) + *green_X = png_float(png_ptr, + info_ptr->colorspace.end_points_XYZ.green_X, "cHRM green X"); + if (green_Y != NULL) + *green_Y = png_float(png_ptr, + info_ptr->colorspace.end_points_XYZ.green_Y, "cHRM green Y"); + if (green_Z != NULL) + *green_Z = png_float(png_ptr, + info_ptr->colorspace.end_points_XYZ.green_Z, "cHRM green Z"); + if (blue_X != NULL) + *blue_X = png_float(png_ptr, + info_ptr->colorspace.end_points_XYZ.blue_X, "cHRM blue X"); + if (blue_Y != NULL) + *blue_Y = png_float(png_ptr, + info_ptr->colorspace.end_points_XYZ.blue_Y, "cHRM blue Y"); + if (blue_Z != NULL) + *blue_Z = png_float(png_ptr, + info_ptr->colorspace.end_points_XYZ.blue_Z, "cHRM blue Z"); + return (PNG_INFO_cHRM); + } + + return (0); +} +# endif + +# ifdef PNG_FIXED_POINT_SUPPORTED +png_uint_32 PNGAPI +png_get_cHRM_XYZ_fixed(png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_red_X, png_fixed_point *int_red_Y, + png_fixed_point *int_red_Z, png_fixed_point *int_green_X, + png_fixed_point *int_green_Y, png_fixed_point *int_green_Z, + png_fixed_point *int_blue_X, png_fixed_point *int_blue_Y, + png_fixed_point *int_blue_Z) +{ + if (png_ptr != NULL && info_ptr != NULL && + (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS)) + { + png_debug1(1, "in %s retrieval function", "cHRM_XYZ"); + + if (int_red_X != NULL) + *int_red_X = info_ptr->colorspace.end_points_XYZ.red_X; + if (int_red_Y != NULL) + *int_red_Y = info_ptr->colorspace.end_points_XYZ.red_Y; + if (int_red_Z != NULL) + *int_red_Z = info_ptr->colorspace.end_points_XYZ.red_Z; + if (int_green_X != NULL) + *int_green_X = info_ptr->colorspace.end_points_XYZ.green_X; + if (int_green_Y != NULL) + *int_green_Y = info_ptr->colorspace.end_points_XYZ.green_Y; + if (int_green_Z != NULL) + *int_green_Z = info_ptr->colorspace.end_points_XYZ.green_Z; + if (int_blue_X != NULL) + *int_blue_X = info_ptr->colorspace.end_points_XYZ.blue_X; + if (int_blue_Y != NULL) + *int_blue_Y = info_ptr->colorspace.end_points_XYZ.blue_Y; + if (int_blue_Z != NULL) + *int_blue_Z = info_ptr->colorspace.end_points_XYZ.blue_Z; + return (PNG_INFO_cHRM); + } + + return (0); +} + +png_uint_32 PNGAPI +png_get_cHRM_fixed(png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *white_x, png_fixed_point *white_y, png_fixed_point *red_x, + png_fixed_point *red_y, png_fixed_point *green_x, png_fixed_point *green_y, + png_fixed_point *blue_x, png_fixed_point *blue_y) +{ + png_debug1(1, "in %s retrieval function", "cHRM"); + + if (png_ptr != NULL && info_ptr != NULL && + (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS)) + { + if (white_x != NULL) + *white_x = info_ptr->colorspace.end_points_xy.whitex; + if (white_y != NULL) + *white_y = info_ptr->colorspace.end_points_xy.whitey; + if (red_x != NULL) + *red_x = info_ptr->colorspace.end_points_xy.redx; + if (red_y != NULL) + *red_y = info_ptr->colorspace.end_points_xy.redy; + if (green_x != NULL) + *green_x = info_ptr->colorspace.end_points_xy.greenx; + if (green_y != NULL) + *green_y = info_ptr->colorspace.end_points_xy.greeny; + if (blue_x != NULL) + *blue_x = info_ptr->colorspace.end_points_xy.bluex; + if (blue_y != NULL) + *blue_y = info_ptr->colorspace.end_points_xy.bluey; + return (PNG_INFO_cHRM); + } + + return (0); +} +# endif +#endif + +#ifdef PNG_gAMA_SUPPORTED +# ifdef PNG_FIXED_POINT_SUPPORTED +png_uint_32 PNGAPI +png_get_gAMA_fixed(png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *file_gamma) +{ + png_debug1(1, "in %s retrieval function", "gAMA"); + + if (png_ptr != NULL && info_ptr != NULL && + (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_GAMMA) && + file_gamma != NULL) + { + *file_gamma = info_ptr->colorspace.gamma; + return (PNG_INFO_gAMA); + } + + return (0); +} +# endif + +# ifdef PNG_FLOATING_POINT_SUPPORTED +png_uint_32 PNGAPI +png_get_gAMA(png_const_structrp png_ptr, png_const_inforp info_ptr, + double *file_gamma) +{ + png_debug1(1, "in %s retrieval function", "gAMA(float)"); + + if (png_ptr != NULL && info_ptr != NULL && + (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_GAMMA) && + file_gamma != NULL) + { + *file_gamma = png_float(png_ptr, info_ptr->colorspace.gamma, + "png_get_gAMA"); + return (PNG_INFO_gAMA); + } + + return (0); +} +# endif +#endif + +#ifdef PNG_sRGB_SUPPORTED +png_uint_32 PNGAPI +png_get_sRGB(png_const_structrp png_ptr, png_const_inforp info_ptr, + int *file_srgb_intent) +{ + png_debug1(1, "in %s retrieval function", "sRGB"); + + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_sRGB) + && file_srgb_intent != NULL) + { + *file_srgb_intent = info_ptr->colorspace.rendering_intent; + return (PNG_INFO_sRGB); + } + + return (0); +} +#endif + +#ifdef PNG_iCCP_SUPPORTED +png_uint_32 PNGAPI +png_get_iCCP(png_const_structrp png_ptr, png_inforp info_ptr, + png_charpp name, int *compression_type, + png_bytepp profile, png_uint_32 *proflen) +{ + png_debug1(1, "in %s retrieval function", "iCCP"); + + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_iCCP) + && name != NULL && compression_type != NULL && profile != NULL && + proflen != NULL) + { + *name = info_ptr->iccp_name; + *profile = info_ptr->iccp_profile; + *proflen = png_get_uint_32(info_ptr->iccp_profile); + /* This is somewhat irrelevant since the profile data returned has + * actually been uncompressed. + */ + *compression_type = PNG_COMPRESSION_TYPE_BASE; + return (PNG_INFO_iCCP); + } + + return (0); +} +#endif + +#ifdef PNG_sPLT_SUPPORTED +int PNGAPI +png_get_sPLT(png_const_structrp png_ptr, png_inforp info_ptr, + png_sPLT_tpp spalettes) +{ + if (png_ptr != NULL && info_ptr != NULL && spalettes != NULL) + { + *spalettes = info_ptr->splt_palettes; + return info_ptr->splt_palettes_num; + } + + return (0); +} +#endif + +#ifdef PNG_hIST_SUPPORTED +png_uint_32 PNGAPI +png_get_hIST(png_const_structrp png_ptr, png_inforp info_ptr, + png_uint_16p *hist) +{ + png_debug1(1, "in %s retrieval function", "hIST"); + + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_hIST) + && hist != NULL) + { + *hist = info_ptr->hist; + return (PNG_INFO_hIST); + } + + return (0); +} +#endif + +png_uint_32 PNGAPI +png_get_IHDR(png_const_structrp png_ptr, png_const_inforp info_ptr, + png_uint_32 *width, png_uint_32 *height, int *bit_depth, + int *color_type, int *interlace_type, int *compression_type, + int *filter_type) +{ + png_debug1(1, "in %s retrieval function", "IHDR"); + + if (png_ptr == NULL || info_ptr == NULL || width == NULL || + height == NULL || bit_depth == NULL || color_type == NULL) + return (0); + + *width = info_ptr->width; + *height = info_ptr->height; + *bit_depth = info_ptr->bit_depth; + *color_type = info_ptr->color_type; + + if (compression_type != NULL) + *compression_type = info_ptr->compression_type; + + if (filter_type != NULL) + *filter_type = info_ptr->filter_type; + + if (interlace_type != NULL) + *interlace_type = info_ptr->interlace_type; + + /* This is redundant if we can be sure that the info_ptr values were all + * assigned in png_set_IHDR(). We do the check anyhow in case an + * application has ignored our advice not to mess with the members + * of info_ptr directly. + */ + png_check_IHDR(png_ptr, info_ptr->width, info_ptr->height, + info_ptr->bit_depth, info_ptr->color_type, info_ptr->interlace_type, + info_ptr->compression_type, info_ptr->filter_type); + + return (1); +} + +#ifdef PNG_oFFs_SUPPORTED +png_uint_32 PNGAPI +png_get_oFFs(png_const_structrp png_ptr, png_const_inforp info_ptr, + png_int_32 *offset_x, png_int_32 *offset_y, int *unit_type) +{ + png_debug1(1, "in %s retrieval function", "oFFs"); + + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_oFFs) + && offset_x != NULL && offset_y != NULL && unit_type != NULL) + { + *offset_x = info_ptr->x_offset; + *offset_y = info_ptr->y_offset; + *unit_type = (int)info_ptr->offset_unit_type; + return (PNG_INFO_oFFs); + } + + return (0); +} +#endif + +#ifdef PNG_pCAL_SUPPORTED +png_uint_32 PNGAPI +png_get_pCAL(png_const_structrp png_ptr, png_inforp info_ptr, + png_charp *purpose, png_int_32 *X0, png_int_32 *X1, int *type, int *nparams, + png_charp *units, png_charpp *params) +{ + png_debug1(1, "in %s retrieval function", "pCAL"); + + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_pCAL) + && purpose != NULL && X0 != NULL && X1 != NULL && type != NULL && + nparams != NULL && units != NULL && params != NULL) + { + *purpose = info_ptr->pcal_purpose; + *X0 = info_ptr->pcal_X0; + *X1 = info_ptr->pcal_X1; + *type = (int)info_ptr->pcal_type; + *nparams = (int)info_ptr->pcal_nparams; + *units = info_ptr->pcal_units; + *params = info_ptr->pcal_params; + return (PNG_INFO_pCAL); + } + + return (0); +} +#endif + +#ifdef PNG_sCAL_SUPPORTED +# ifdef PNG_FIXED_POINT_SUPPORTED +# if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || \ + defined(PNG_FLOATING_POINT_SUPPORTED) +png_uint_32 PNGAPI +png_get_sCAL_fixed(png_const_structrp png_ptr, png_const_inforp info_ptr, + int *unit, png_fixed_point *width, png_fixed_point *height) +{ + if (png_ptr != NULL && info_ptr != NULL && + (info_ptr->valid & PNG_INFO_sCAL)) + { + *unit = info_ptr->scal_unit; + /*TODO: make this work without FP support; the API is currently eliminated + * if neither floating point APIs nor internal floating point arithmetic + * are enabled. + */ + *width = png_fixed(png_ptr, atof(info_ptr->scal_s_width), "sCAL width"); + *height = png_fixed(png_ptr, atof(info_ptr->scal_s_height), + "sCAL height"); + return (PNG_INFO_sCAL); + } + + return(0); +} +# endif /* FLOATING_ARITHMETIC */ +# endif /* FIXED_POINT */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +png_uint_32 PNGAPI +png_get_sCAL(png_const_structrp png_ptr, png_const_inforp info_ptr, + int *unit, double *width, double *height) +{ + if (png_ptr != NULL && info_ptr != NULL && + (info_ptr->valid & PNG_INFO_sCAL)) + { + *unit = info_ptr->scal_unit; + *width = atof(info_ptr->scal_s_width); + *height = atof(info_ptr->scal_s_height); + return (PNG_INFO_sCAL); + } + + return(0); +} +# endif /* FLOATING POINT */ +png_uint_32 PNGAPI +png_get_sCAL_s(png_const_structrp png_ptr, png_const_inforp info_ptr, + int *unit, png_charpp width, png_charpp height) +{ + if (png_ptr != NULL && info_ptr != NULL && + (info_ptr->valid & PNG_INFO_sCAL)) + { + *unit = info_ptr->scal_unit; + *width = info_ptr->scal_s_width; + *height = info_ptr->scal_s_height; + return (PNG_INFO_sCAL); + } + + return(0); +} +#endif /* sCAL */ + +#ifdef PNG_pHYs_SUPPORTED +png_uint_32 PNGAPI +png_get_pHYs(png_const_structrp png_ptr, png_const_inforp info_ptr, + png_uint_32 *res_x, png_uint_32 *res_y, int *unit_type) +{ + png_uint_32 retval = 0; + + png_debug1(1, "in %s retrieval function", "pHYs"); + + if (png_ptr != NULL && info_ptr != NULL && + (info_ptr->valid & PNG_INFO_pHYs)) + { + if (res_x != NULL) + { + *res_x = info_ptr->x_pixels_per_unit; + retval |= PNG_INFO_pHYs; + } + + if (res_y != NULL) + { + *res_y = info_ptr->y_pixels_per_unit; + retval |= PNG_INFO_pHYs; + } + + if (unit_type != NULL) + { + *unit_type = (int)info_ptr->phys_unit_type; + retval |= PNG_INFO_pHYs; + } + } + + return (retval); +} +#endif /* pHYs */ + +png_uint_32 PNGAPI +png_get_PLTE(png_const_structrp png_ptr, png_inforp info_ptr, + png_colorp *palette, int *num_palette) +{ + png_debug1(1, "in %s retrieval function", "PLTE"); + + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_PLTE) + && palette != NULL) + { + *palette = info_ptr->palette; + *num_palette = info_ptr->num_palette; + png_debug1(3, "num_palette = %d", *num_palette); + return (PNG_INFO_PLTE); + } + + return (0); +} + +#ifdef PNG_sBIT_SUPPORTED +png_uint_32 PNGAPI +png_get_sBIT(png_const_structrp png_ptr, png_inforp info_ptr, + png_color_8p *sig_bit) +{ + png_debug1(1, "in %s retrieval function", "sBIT"); + + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_sBIT) + && sig_bit != NULL) + { + *sig_bit = &(info_ptr->sig_bit); + return (PNG_INFO_sBIT); + } + + return (0); +} +#endif + +#ifdef PNG_TEXT_SUPPORTED +int PNGAPI +png_get_text(png_const_structrp png_ptr, png_inforp info_ptr, + png_textp *text_ptr, int *num_text) +{ + if (png_ptr != NULL && info_ptr != NULL && info_ptr->num_text > 0) + { + png_debug1(1, "in 0x%lx retrieval function", + (unsigned long)png_ptr->chunk_name); + + if (text_ptr != NULL) + *text_ptr = info_ptr->text; + + if (num_text != NULL) + *num_text = info_ptr->num_text; + + return info_ptr->num_text; + } + + if (num_text != NULL) + *num_text = 0; + + return(0); +} +#endif + +#ifdef PNG_tIME_SUPPORTED +png_uint_32 PNGAPI +png_get_tIME(png_const_structrp png_ptr, png_inforp info_ptr, + png_timep *mod_time) +{ + png_debug1(1, "in %s retrieval function", "tIME"); + + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_tIME) + && mod_time != NULL) + { + *mod_time = &(info_ptr->mod_time); + return (PNG_INFO_tIME); + } + + return (0); +} +#endif + +#ifdef PNG_tRNS_SUPPORTED +png_uint_32 PNGAPI +png_get_tRNS(png_const_structrp png_ptr, png_inforp info_ptr, + png_bytep *trans_alpha, int *num_trans, png_color_16p *trans_color) +{ + png_uint_32 retval = 0; + if (png_ptr != NULL && info_ptr != NULL && (info_ptr->valid & PNG_INFO_tRNS)) + { + png_debug1(1, "in %s retrieval function", "tRNS"); + + if (info_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + { + if (trans_alpha != NULL) + { + *trans_alpha = info_ptr->trans_alpha; + retval |= PNG_INFO_tRNS; + } + + if (trans_color != NULL) + *trans_color = &(info_ptr->trans_color); + } + + else /* if (info_ptr->color_type != PNG_COLOR_TYPE_PALETTE) */ + { + if (trans_color != NULL) + { + *trans_color = &(info_ptr->trans_color); + retval |= PNG_INFO_tRNS; + } + + if (trans_alpha != NULL) + *trans_alpha = NULL; + } + + if (num_trans != NULL) + { + *num_trans = info_ptr->num_trans; + retval |= PNG_INFO_tRNS; + } + } + + return (retval); +} +#endif + +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +int PNGAPI +png_get_unknown_chunks(png_const_structrp png_ptr, png_inforp info_ptr, + png_unknown_chunkpp unknowns) +{ + if (png_ptr != NULL && info_ptr != NULL && unknowns != NULL) + { + *unknowns = info_ptr->unknown_chunks; + return info_ptr->unknown_chunks_num; + } + + return (0); +} +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +png_byte PNGAPI +png_get_rgb_to_gray_status (png_const_structrp png_ptr) +{ + return (png_byte)(png_ptr ? png_ptr->rgb_to_gray_status : 0); +} +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +png_voidp PNGAPI +png_get_user_chunk_ptr(png_const_structrp png_ptr) +{ + return (png_ptr ? png_ptr->user_chunk_ptr : NULL); +} +#endif + +png_size_t PNGAPI +png_get_compression_buffer_size(png_const_structrp png_ptr) +{ + if (png_ptr == NULL) + return 0; + +# ifdef PNG_WRITE_SUPPORTED + if (png_ptr->mode & PNG_IS_READ_STRUCT) +# endif + { +# ifdef PNG_SEQUENTIAL_READ_SUPPORTED + return png_ptr->IDAT_read_size; +# else + return PNG_IDAT_READ_SIZE; +# endif + } + +# ifdef PNG_WRITE_SUPPORTED + else + return png_ptr->zbuffer_size; +# endif +} + +#ifdef PNG_SET_USER_LIMITS_SUPPORTED +/* These functions were added to libpng 1.2.6 and were enabled + * by default in libpng-1.4.0 */ +png_uint_32 PNGAPI +png_get_user_width_max (png_const_structrp png_ptr) +{ + return (png_ptr ? png_ptr->user_width_max : 0); +} + +png_uint_32 PNGAPI +png_get_user_height_max (png_const_structrp png_ptr) +{ + return (png_ptr ? png_ptr->user_height_max : 0); +} + +/* This function was added to libpng 1.4.0 */ +png_uint_32 PNGAPI +png_get_chunk_cache_max (png_const_structrp png_ptr) +{ + return (png_ptr ? png_ptr->user_chunk_cache_max : 0); +} + +/* This function was added to libpng 1.4.1 */ +png_alloc_size_t PNGAPI +png_get_chunk_malloc_max (png_const_structrp png_ptr) +{ + return (png_ptr ? png_ptr->user_chunk_malloc_max : 0); +} +#endif /* ?PNG_SET_USER_LIMITS_SUPPORTED */ + +/* These functions were added to libpng 1.4.0 */ +#ifdef PNG_IO_STATE_SUPPORTED +png_uint_32 PNGAPI +png_get_io_state (png_const_structrp png_ptr) +{ + return png_ptr->io_state; +} + +png_uint_32 PNGAPI +png_get_io_chunk_type (png_const_structrp png_ptr) +{ + return png_ptr->chunk_name; +} +#endif /* ?PNG_IO_STATE_SUPPORTED */ + +#ifdef PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +# ifdef PNG_GET_PALETTE_MAX_SUPPORTED +int PNGAPI +png_get_palette_max(png_const_structp png_ptr, png_const_infop info_ptr) +{ + if (png_ptr != NULL && info_ptr != NULL) + return png_ptr->num_palette_max; + + return (-1); +} +# endif +#endif + +#endif /* PNG_READ_SUPPORTED || PNG_WRITE_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pnginfo.h b/src/SDL2/external/libpng-1.6.2/pnginfo.h new file mode 100644 index 000000000..26bf26502 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pnginfo.h @@ -0,0 +1,260 @@ + +/* pnginfo.h - header file for PNG reference library + * + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * Last changed in libpng 1.6.1 [March 28, 2013] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + + /* png_info is a structure that holds the information in a PNG file so + * that the application can find out the characteristics of the image. + * If you are reading the file, this structure will tell you what is + * in the PNG file. If you are writing the file, fill in the information + * you want to put into the PNG file, using png_set_*() functions, then + * call png_write_info(). + * + * The names chosen should be very close to the PNG specification, so + * consult that document for information about the meaning of each field. + * + * With libpng < 0.95, it was only possible to directly set and read the + * the values in the png_info_struct, which meant that the contents and + * order of the values had to remain fixed. With libpng 0.95 and later, + * however, there are now functions that abstract the contents of + * png_info_struct from the application, so this makes it easier to use + * libpng with dynamic libraries, and even makes it possible to use + * libraries that don't have all of the libpng ancillary chunk-handing + * functionality. In libpng-1.5.0 this was moved into a separate private + * file that is not visible to applications. + * + * The following members may have allocated storage attached that should be + * cleaned up before the structure is discarded: palette, trans, text, + * pcal_purpose, pcal_units, pcal_params, hist, iccp_name, iccp_profile, + * splt_palettes, scal_unit, row_pointers, and unknowns. By default, these + * are automatically freed when the info structure is deallocated, if they were + * allocated internally by libpng. This behavior can be changed by means + * of the png_data_freer() function. + * + * More allocation details: all the chunk-reading functions that + * change these members go through the corresponding png_set_* + * functions. A function to clear these members is available: see + * png_free_data(). The png_set_* functions do not depend on being + * able to point info structure members to any of the storage they are + * passed (they make their own copies), EXCEPT that the png_set_text + * functions use the same storage passed to them in the text_ptr or + * itxt_ptr structure argument, and the png_set_rows and png_set_unknowns + * functions do not make their own copies. + */ +#ifndef PNGINFO_H +#define PNGINFO_H + +struct png_info_def +{ + /* The following are necessary for every PNG file */ + png_uint_32 width; /* width of image in pixels (from IHDR) */ + png_uint_32 height; /* height of image in pixels (from IHDR) */ + png_uint_32 valid; /* valid chunk data (see PNG_INFO_ below) */ + png_size_t rowbytes; /* bytes needed to hold an untransformed row */ + png_colorp palette; /* array of color values (valid & PNG_INFO_PLTE) */ + png_uint_16 num_palette; /* number of color entries in "palette" (PLTE) */ + png_uint_16 num_trans; /* number of transparent palette color (tRNS) */ + png_byte bit_depth; /* 1, 2, 4, 8, or 16 bits/channel (from IHDR) */ + png_byte color_type; /* see PNG_COLOR_TYPE_ below (from IHDR) */ + /* The following three should have been named *_method not *_type */ + png_byte compression_type; /* must be PNG_COMPRESSION_TYPE_BASE (IHDR) */ + png_byte filter_type; /* must be PNG_FILTER_TYPE_BASE (from IHDR) */ + png_byte interlace_type; /* One of PNG_INTERLACE_NONE, PNG_INTERLACE_ADAM7 */ + + /* The following are set by png_set_IHDR, called from the application on + * write, but the are never actually used by the write code. + */ + png_byte channels; /* number of data channels per pixel (1, 2, 3, 4) */ + png_byte pixel_depth; /* number of bits per pixel */ + png_byte spare_byte; /* to align the data, and for future use */ + +#ifdef PNG_READ_SUPPORTED + /* This is never set during write */ + png_byte signature[8]; /* magic bytes read by libpng from start of file */ +#endif + + /* The rest of the data is optional. If you are reading, check the + * valid field to see if the information in these are valid. If you + * are writing, set the valid field to those chunks you want written, + * and initialize the appropriate fields below. + */ + +#if defined(PNG_COLORSPACE_SUPPORTED) || defined(PNG_GAMMA_SUPPORTED) + /* png_colorspace only contains 'flags' if neither GAMMA or COLORSPACE are + * defined. When COLORSPACE is switched on all the colorspace-defining + * chunks should be enabled, when GAMMA is switched on all the gamma-defining + * chunks should be enabled. If this is not done it becomes possible to read + * inconsistent PNG files and assign a probably incorrect interpretation to + * the information. (In other words, by carefully choosing which chunks to + * recognize the system configuration can select an interpretation for PNG + * files containing ambiguous data and this will result in inconsistent + * behavior between different libpng builds!) + */ + png_colorspace colorspace; +#endif + +#ifdef PNG_iCCP_SUPPORTED + /* iCCP chunk data. */ + png_charp iccp_name; /* profile name */ + png_bytep iccp_profile; /* International Color Consortium profile data */ + png_uint_32 iccp_proflen; /* ICC profile data length */ +#endif + +#ifdef PNG_TEXT_SUPPORTED + /* The tEXt, and zTXt chunks contain human-readable textual data in + * uncompressed, compressed, and optionally compressed forms, respectively. + * The data in "text" is an array of pointers to uncompressed, + * null-terminated C strings. Each chunk has a keyword that describes the + * textual data contained in that chunk. Keywords are not required to be + * unique, and the text string may be empty. Any number of text chunks may + * be in an image. + */ + int num_text; /* number of comments read or comments to write */ + int max_text; /* current size of text array */ + png_textp text; /* array of comments read or comments to write */ +#endif /* PNG_TEXT_SUPPORTED */ + +#ifdef PNG_tIME_SUPPORTED + /* The tIME chunk holds the last time the displayed image data was + * modified. See the png_time struct for the contents of this struct. + */ + png_time mod_time; +#endif + +#ifdef PNG_sBIT_SUPPORTED + /* The sBIT chunk specifies the number of significant high-order bits + * in the pixel data. Values are in the range [1, bit_depth], and are + * only specified for the channels in the pixel data. The contents of + * the low-order bits is not specified. Data is valid if + * (valid & PNG_INFO_sBIT) is non-zero. + */ + png_color_8 sig_bit; /* significant bits in color channels */ +#endif + +#if defined(PNG_tRNS_SUPPORTED) || defined(PNG_READ_EXPAND_SUPPORTED) || \ +defined(PNG_READ_BACKGROUND_SUPPORTED) + /* The tRNS chunk supplies transparency data for paletted images and + * other image types that don't need a full alpha channel. There are + * "num_trans" transparency values for a paletted image, stored in the + * same order as the palette colors, starting from index 0. Values + * for the data are in the range [0, 255], ranging from fully transparent + * to fully opaque, respectively. For non-paletted images, there is a + * single color specified that should be treated as fully transparent. + * Data is valid if (valid & PNG_INFO_tRNS) is non-zero. + */ + png_bytep trans_alpha; /* alpha values for paletted image */ + png_color_16 trans_color; /* transparent color for non-palette image */ +#endif + +#if defined(PNG_bKGD_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) + /* The bKGD chunk gives the suggested image background color if the + * display program does not have its own background color and the image + * is needs to composited onto a background before display. The colors + * in "background" are normally in the same color space/depth as the + * pixel data. Data is valid if (valid & PNG_INFO_bKGD) is non-zero. + */ + png_color_16 background; +#endif + +#ifdef PNG_oFFs_SUPPORTED + /* The oFFs chunk gives the offset in "offset_unit_type" units rightwards + * and downwards from the top-left corner of the display, page, or other + * application-specific co-ordinate space. See the PNG_OFFSET_ defines + * below for the unit types. Valid if (valid & PNG_INFO_oFFs) non-zero. + */ + png_int_32 x_offset; /* x offset on page */ + png_int_32 y_offset; /* y offset on page */ + png_byte offset_unit_type; /* offset units type */ +#endif + +#ifdef PNG_pHYs_SUPPORTED + /* The pHYs chunk gives the physical pixel density of the image for + * display or printing in "phys_unit_type" units (see PNG_RESOLUTION_ + * defines below). Data is valid if (valid & PNG_INFO_pHYs) is non-zero. + */ + png_uint_32 x_pixels_per_unit; /* horizontal pixel density */ + png_uint_32 y_pixels_per_unit; /* vertical pixel density */ + png_byte phys_unit_type; /* resolution type (see PNG_RESOLUTION_ below) */ +#endif + +#ifdef PNG_hIST_SUPPORTED + /* The hIST chunk contains the relative frequency or importance of the + * various palette entries, so that a viewer can intelligently select a + * reduced-color palette, if required. Data is an array of "num_palette" + * values in the range [0,65535]. Data valid if (valid & PNG_INFO_hIST) + * is non-zero. + */ + png_uint_16p hist; +#endif + +#ifdef PNG_pCAL_SUPPORTED + /* The pCAL chunk describes a transformation between the stored pixel + * values and original physical data values used to create the image. + * The integer range [0, 2^bit_depth - 1] maps to the floating-point + * range given by [pcal_X0, pcal_X1], and are further transformed by a + * (possibly non-linear) transformation function given by "pcal_type" + * and "pcal_params" into "pcal_units". Please see the PNG_EQUATION_ + * defines below, and the PNG-Group's PNG extensions document for a + * complete description of the transformations and how they should be + * implemented, and for a description of the ASCII parameter strings. + * Data values are valid if (valid & PNG_INFO_pCAL) non-zero. + */ + png_charp pcal_purpose; /* pCAL chunk description string */ + png_int_32 pcal_X0; /* minimum value */ + png_int_32 pcal_X1; /* maximum value */ + png_charp pcal_units; /* Latin-1 string giving physical units */ + png_charpp pcal_params; /* ASCII strings containing parameter values */ + png_byte pcal_type; /* equation type (see PNG_EQUATION_ below) */ + png_byte pcal_nparams; /* number of parameters given in pcal_params */ +#endif + +/* New members added in libpng-1.0.6 */ + png_uint_32 free_me; /* flags items libpng is responsible for freeing */ + +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED + /* Storage for unknown chunks that the library doesn't recognize. */ + png_unknown_chunkp unknown_chunks; + + /* The type of this field is limited by the type of + * png_struct::user_chunk_cache_max, else overflow can occur. + */ + int unknown_chunks_num; +#endif + +#ifdef PNG_sPLT_SUPPORTED + /* Data on sPLT chunks (there may be more than one). */ + png_sPLT_tp splt_palettes; + int splt_palettes_num; /* Match type returned by png_get API */ +#endif + +#ifdef PNG_sCAL_SUPPORTED + /* The sCAL chunk describes the actual physical dimensions of the + * subject matter of the graphic. The chunk contains a unit specification + * a byte value, and two ASCII strings representing floating-point + * values. The values are width and height corresponsing to one pixel + * in the image. Data values are valid if (valid & PNG_INFO_sCAL) is + * non-zero. + */ + png_byte scal_unit; /* unit of physical scale */ + png_charp scal_s_width; /* string containing height */ + png_charp scal_s_height; /* string containing width */ +#endif + +#ifdef PNG_INFO_IMAGE_SUPPORTED + /* Memory has been allocated if (valid & PNG_ALLOCATED_INFO_ROWS) + non-zero */ + /* Data valid if (valid & PNG_INFO_IDAT) non-zero */ + png_bytepp row_pointers; /* the image bits */ +#endif + +}; +#endif /* PNGINFO_H */ diff --git a/src/SDL2/external/libpng-1.6.2/pnglibconf.h b/src/SDL2/external/libpng-1.6.2/pnglibconf.h new file mode 100644 index 000000000..16ad5c9f0 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pnglibconf.h @@ -0,0 +1,211 @@ +/* libpng 1.6.2 STANDARD API DEFINITION */ + +/* pnglibconf.h - library build configuration */ + +/* Libpng version 1.6.2 - April 25, 2013 */ + +/* Copyright (c) 1998-2013 Glenn Randers-Pehrson */ + +/* This code is released under the libpng license. */ +/* For conditions of distribution and use, see the disclaimer */ +/* and license in png.h */ + +/* pnglibconf.h */ +/* Machine generated file: DO NOT EDIT */ +/* Derived from: scripts/pnglibconf.dfa */ +#ifndef PNGLCONF_H +#define PNGLCONF_H +/* options */ +#define PNG_16BIT_SUPPORTED +#define PNG_ALIGNED_MEMORY_SUPPORTED +/*#undef PNG_ARM_NEON_API_SUPPORTED*/ +/*#undef PNG_ARM_NEON_CHECK_SUPPORTED*/ +/*#undef PNG_ARM_NEON_SUPPORTED*/ +#define PNG_BENIGN_ERRORS_SUPPORTED +#define PNG_BENIGN_READ_ERRORS_SUPPORTED +/*#undef PNG_BENIGN_WRITE_ERRORS_SUPPORTED*/ +#define PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +#define PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_COLORSPACE_SUPPORTED +#define PNG_CONSOLE_IO_SUPPORTED +#define PNG_CONVERT_tIME_SUPPORTED +#define PNG_EASY_ACCESS_SUPPORTED +/*#undef PNG_ERROR_NUMBERS_SUPPORTED*/ +#define PNG_ERROR_TEXT_SUPPORTED +#define PNG_FIXED_POINT_SUPPORTED +#define PNG_FLOATING_ARITHMETIC_SUPPORTED +#define PNG_FLOATING_POINT_SUPPORTED +#define PNG_FORMAT_AFIRST_SUPPORTED +#define PNG_FORMAT_BGR_SUPPORTED +#define PNG_GAMMA_SUPPORTED +#define PNG_GET_PALETTE_MAX_SUPPORTED +#define PNG_HANDLE_AS_UNKNOWN_SUPPORTED +#define PNG_INCH_CONVERSIONS_SUPPORTED +#define PNG_INFO_IMAGE_SUPPORTED +#define PNG_IO_STATE_SUPPORTED +#define PNG_MNG_FEATURES_SUPPORTED +#define PNG_POINTER_INDEXING_SUPPORTED +#define PNG_PROGRESSIVE_READ_SUPPORTED +#define PNG_READ_16BIT_SUPPORTED +#define PNG_READ_ALPHA_MODE_SUPPORTED +#define PNG_READ_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_READ_BACKGROUND_SUPPORTED +#define PNG_READ_BGR_SUPPORTED +#define PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_READ_COMPOSITE_NODIV_SUPPORTED +#define PNG_READ_COMPRESSED_TEXT_SUPPORTED +#define PNG_READ_EXPAND_16_SUPPORTED +#define PNG_READ_EXPAND_SUPPORTED +#define PNG_READ_FILLER_SUPPORTED +#define PNG_READ_GAMMA_SUPPORTED +#define PNG_READ_GET_PALETTE_MAX_SUPPORTED +#define PNG_READ_GRAY_TO_RGB_SUPPORTED +#define PNG_READ_INTERLACING_SUPPORTED +#define PNG_READ_INT_FUNCTIONS_SUPPORTED +#define PNG_READ_INVERT_ALPHA_SUPPORTED +#define PNG_READ_INVERT_SUPPORTED +#define PNG_READ_OPT_PLTE_SUPPORTED +#define PNG_READ_PACKSWAP_SUPPORTED +#define PNG_READ_PACK_SUPPORTED +#define PNG_READ_QUANTIZE_SUPPORTED +#define PNG_READ_RGB_TO_GRAY_SUPPORTED +#define PNG_READ_SCALE_16_TO_8_SUPPORTED +#define PNG_READ_SHIFT_SUPPORTED +#define PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_STRIP_ALPHA_SUPPORTED +#define PNG_READ_SUPPORTED +#define PNG_READ_SWAP_ALPHA_SUPPORTED +#define PNG_READ_SWAP_SUPPORTED +#define PNG_READ_TEXT_SUPPORTED +#define PNG_READ_TRANSFORMS_SUPPORTED +#define PNG_READ_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_READ_USER_CHUNKS_SUPPORTED +#define PNG_READ_USER_TRANSFORM_SUPPORTED +#define PNG_READ_bKGD_SUPPORTED +#define PNG_READ_cHRM_SUPPORTED +#define PNG_READ_gAMA_SUPPORTED +#define PNG_READ_hIST_SUPPORTED +#define PNG_READ_iCCP_SUPPORTED +#define PNG_READ_iTXt_SUPPORTED +#define PNG_READ_oFFs_SUPPORTED +#define PNG_READ_pCAL_SUPPORTED +#define PNG_READ_pHYs_SUPPORTED +#define PNG_READ_sBIT_SUPPORTED +#define PNG_READ_sCAL_SUPPORTED +#define PNG_READ_sPLT_SUPPORTED +#define PNG_READ_sRGB_SUPPORTED +#define PNG_READ_tEXt_SUPPORTED +#define PNG_READ_tIME_SUPPORTED +#define PNG_READ_tRNS_SUPPORTED +#define PNG_READ_zTXt_SUPPORTED +/*#undef PNG_SAFE_LIMITS_SUPPORTED*/ +#define PNG_SAVE_INT_32_SUPPORTED +#define PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SEQUENTIAL_READ_SUPPORTED +#define PNG_SETJMP_SUPPORTED +#define PNG_SET_CHUNK_CACHE_LIMIT_SUPPORTED +#define PNG_SET_CHUNK_MALLOC_LIMIT_SUPPORTED +/*#undef PNG_SET_OPTION_SUPPORTED*/ +#define PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SET_USER_LIMITS_SUPPORTED +#define PNG_SIMPLIFIED_READ_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_READ_BGR_SUPPORTED +#define PNG_SIMPLIFIED_READ_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_BGR_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_SUPPORTED +#define PNG_STDIO_SUPPORTED +#define PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_TEXT_SUPPORTED +#define PNG_TIME_RFC1123_SUPPORTED +#define PNG_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_USER_CHUNKS_SUPPORTED +#define PNG_USER_LIMITS_SUPPORTED +#define PNG_USER_MEM_SUPPORTED +#define PNG_USER_TRANSFORM_INFO_SUPPORTED +#define PNG_USER_TRANSFORM_PTR_SUPPORTED +#define PNG_WARNINGS_SUPPORTED +#define PNG_WRITE_16BIT_SUPPORTED +#define PNG_WRITE_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_WRITE_BGR_SUPPORTED +#define PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_WRITE_COMPRESSED_TEXT_SUPPORTED +#define PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +#define PNG_WRITE_FILLER_SUPPORTED +#define PNG_WRITE_FILTER_SUPPORTED +#define PNG_WRITE_FLUSH_SUPPORTED +#define PNG_WRITE_GET_PALETTE_MAX_SUPPORTED +#define PNG_WRITE_INTERLACING_SUPPORTED +#define PNG_WRITE_INT_FUNCTIONS_SUPPORTED +#define PNG_WRITE_INVERT_ALPHA_SUPPORTED +#define PNG_WRITE_INVERT_SUPPORTED +#define PNG_WRITE_OPTIMIZE_CMF_SUPPORTED +#define PNG_WRITE_PACKSWAP_SUPPORTED +#define PNG_WRITE_PACK_SUPPORTED +#define PNG_WRITE_SHIFT_SUPPORTED +#define PNG_WRITE_SUPPORTED +#define PNG_WRITE_SWAP_ALPHA_SUPPORTED +#define PNG_WRITE_SWAP_SUPPORTED +#define PNG_WRITE_TEXT_SUPPORTED +#define PNG_WRITE_TRANSFORMS_SUPPORTED +#define PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_WRITE_USER_TRANSFORM_SUPPORTED +#define PNG_WRITE_WEIGHTED_FILTER_SUPPORTED +#define PNG_WRITE_bKGD_SUPPORTED +#define PNG_WRITE_cHRM_SUPPORTED +#define PNG_WRITE_gAMA_SUPPORTED +#define PNG_WRITE_hIST_SUPPORTED +#define PNG_WRITE_iCCP_SUPPORTED +#define PNG_WRITE_iTXt_SUPPORTED +#define PNG_WRITE_oFFs_SUPPORTED +#define PNG_WRITE_pCAL_SUPPORTED +#define PNG_WRITE_pHYs_SUPPORTED +#define PNG_WRITE_sBIT_SUPPORTED +#define PNG_WRITE_sCAL_SUPPORTED +#define PNG_WRITE_sPLT_SUPPORTED +#define PNG_WRITE_sRGB_SUPPORTED +#define PNG_WRITE_tEXt_SUPPORTED +#define PNG_WRITE_tIME_SUPPORTED +#define PNG_WRITE_tRNS_SUPPORTED +#define PNG_WRITE_zTXt_SUPPORTED +#define PNG_bKGD_SUPPORTED +#define PNG_cHRM_SUPPORTED +#define PNG_gAMA_SUPPORTED +#define PNG_hIST_SUPPORTED +#define PNG_iCCP_SUPPORTED +#define PNG_iTXt_SUPPORTED +#define PNG_oFFs_SUPPORTED +#define PNG_pCAL_SUPPORTED +#define PNG_pHYs_SUPPORTED +#define PNG_sBIT_SUPPORTED +#define PNG_sCAL_SUPPORTED +#define PNG_sPLT_SUPPORTED +#define PNG_sRGB_SUPPORTED +#define PNG_tEXt_SUPPORTED +#define PNG_tIME_SUPPORTED +#define PNG_tRNS_SUPPORTED +#define PNG_zTXt_SUPPORTED +/* end of options */ +/* settings */ +#define PNG_API_RULE 0 +#define PNG_CALLOC_SUPPORTED +#define PNG_COST_SHIFT 3 +#define PNG_DEFAULT_READ_MACROS 1 +#define PNG_GAMMA_THRESHOLD_FIXED 5000 +#define PNG_IDAT_READ_SIZE PNG_ZBUF_SIZE +#define PNG_INFLATE_BUF_SIZE 1024 +#define PNG_MAX_GAMMA_8 11 +#define PNG_QUANTIZE_BLUE_BITS 5 +#define PNG_QUANTIZE_GREEN_BITS 5 +#define PNG_QUANTIZE_RED_BITS 5 +#define PNG_TEXT_Z_DEFAULT_COMPRESSION (-1) +#define PNG_TEXT_Z_DEFAULT_STRATEGY 0 +#define PNG_WEIGHT_SHIFT 8 +#define PNG_ZBUF_SIZE 8192 +#define PNG_Z_DEFAULT_COMPRESSION (-1) +#define PNG_Z_DEFAULT_NOFILTER_STRATEGY 0 +#define PNG_Z_DEFAULT_STRATEGY 1 +#define PNG_sCAL_PRECISION 5 +#define PNG_sRGB_PROFILE_CHECKS 2 +/* end of settings */ +#endif /* PNGLCONF_H */ diff --git a/src/SDL2/external/libpng-1.6.2/pngmem.c b/src/SDL2/external/libpng-1.6.2/pngmem.c new file mode 100644 index 000000000..b9b3efb44 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngmem.c @@ -0,0 +1,277 @@ + +/* pngmem.c - stub functions for memory allocation + * + * Last changed in libpng 1.6.0 [February 14, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * This file provides a location for all memory allocation. Users who + * need special memory handling are expected to supply replacement + * functions for png_malloc() and png_free(), and to use + * png_create_read_struct_2() and png_create_write_struct_2() to + * identify the replacement functions. + */ + +#include "pngpriv.h" + +#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) +/* Free a png_struct */ +void /* PRIVATE */ +png_destroy_png_struct(png_structrp png_ptr) +{ + if (png_ptr != NULL) + { + /* png_free might call png_error and may certainly call + * png_get_mem_ptr, so fake a temporary png_struct to support this. + */ + png_struct dummy_struct = *png_ptr; + memset(png_ptr, 0, (sizeof *png_ptr)); + png_free(&dummy_struct, png_ptr); + +# ifdef PNG_SETJMP_SUPPORTED + /* We may have a jmp_buf left to deallocate. */ + png_free_jmpbuf(&dummy_struct); +# endif + } +} + +/* Allocate memory. For reasonable files, size should never exceed + * 64K. However, zlib may allocate more then 64K if you don't tell + * it not to. See zconf.h and png.h for more information. zlib does + * need to allocate exactly 64K, so whatever you call here must + * have the ability to do that. + */ +PNG_FUNCTION(png_voidp,PNGAPI +png_calloc,(png_const_structrp png_ptr, png_alloc_size_t size),PNG_ALLOCATED) +{ + png_voidp ret; + + ret = png_malloc(png_ptr, size); + + if (ret != NULL) + memset(ret, 0, size); + + return ret; +} + +/* png_malloc_base, an internal function added at libpng 1.6.0, does the work of + * allocating memory, taking into account limits and PNG_USER_MEM_SUPPORTED. + * Checking and error handling must happen outside this routine; it returns NULL + * if the allocation cannot be done (for any reason.) + */ +PNG_FUNCTION(png_voidp /* PRIVATE */, +png_malloc_base,(png_const_structrp png_ptr, png_alloc_size_t size), + PNG_ALLOCATED) +{ + /* Moved to png_malloc_base from png_malloc_default in 1.6.0; the DOS + * allocators have also been removed in 1.6.0, so any 16-bit system now has + * to implement a user memory handler. This checks to be sure it isn't + * called with big numbers. + */ +#ifdef PNG_USER_MEM_SUPPORTED + PNG_UNUSED(png_ptr) +#endif + if (size > 0 && size <= PNG_SIZE_MAX +# ifdef PNG_MAX_MALLOC_64K + && size <= 65536U +# endif + ) + { +#ifdef PNG_USER_MEM_SUPPORTED + if (png_ptr != NULL && png_ptr->malloc_fn != NULL) + return png_ptr->malloc_fn(png_constcast(png_structrp,png_ptr), size); + + else +#endif + return malloc((size_t)size); /* checked for truncation above */ + } + + else + return NULL; +} + +/* This is really here only to work round a spurious warning in GCC 4.6 and 4.7 + * that arises because of the checks in png_realloc_array that are repeated in + * png_malloc_array. + */ +static png_voidp +png_malloc_array_checked(png_const_structrp png_ptr, int nelements, + size_t element_size) +{ + png_alloc_size_t req = nelements; /* known to be > 0 */ + + if (req <= PNG_SIZE_MAX/element_size) + return png_malloc_base(png_ptr, req * element_size); + + /* The failure case when the request is too large */ + return NULL; +} + +PNG_FUNCTION(png_voidp /* PRIVATE */, +png_malloc_array,(png_const_structrp png_ptr, int nelements, + size_t element_size),PNG_ALLOCATED) +{ + if (nelements <= 0 || element_size == 0) + png_error(png_ptr, "internal error: array alloc"); + + return png_malloc_array_checked(png_ptr, nelements, element_size); +} + +PNG_FUNCTION(png_voidp /* PRIVATE */, +png_realloc_array,(png_const_structrp png_ptr, png_const_voidp old_array, + int old_elements, int add_elements, size_t element_size),PNG_ALLOCATED) +{ + /* These are internal errors: */ + if (add_elements <= 0 || element_size == 0 || old_elements < 0 || + (old_array == NULL && old_elements > 0)) + png_error(png_ptr, "internal error: array realloc"); + + /* Check for overflow on the elements count (so the caller does not have to + * check.) + */ + if (add_elements <= INT_MAX - old_elements) + { + png_voidp new_array = png_malloc_array_checked(png_ptr, + old_elements+add_elements, element_size); + + if (new_array != NULL) + { + /* Because png_malloc_array worked the size calculations below cannot + * overflow. + */ + if (old_elements > 0) + memcpy(new_array, old_array, element_size*(unsigned)old_elements); + + memset((char*)new_array + element_size*(unsigned)old_elements, 0, + element_size*(unsigned)add_elements); + + return new_array; + } + } + + return NULL; /* error */ +} + +/* Various functions that have different error handling are derived from this. + * png_malloc always exists, but if PNG_USER_MEM_SUPPORTED is defined a separate + * function png_malloc_default is also provided. + */ +PNG_FUNCTION(png_voidp,PNGAPI +png_malloc,(png_const_structrp png_ptr, png_alloc_size_t size),PNG_ALLOCATED) +{ + png_voidp ret; + + if (png_ptr == NULL) + return NULL; + + ret = png_malloc_base(png_ptr, size); + + if (ret == NULL) + png_error(png_ptr, "Out of memory"); /* 'm' means png_malloc */ + + return ret; +} + +#ifdef PNG_USER_MEM_SUPPORTED +PNG_FUNCTION(png_voidp,PNGAPI +png_malloc_default,(png_const_structrp png_ptr, png_alloc_size_t size), + PNG_ALLOCATED PNG_DEPRECATED) +{ + png_voidp ret; + + if (png_ptr == NULL) + return NULL; + + /* Passing 'NULL' here bypasses the application provided memory handler. */ + ret = png_malloc_base(NULL/*use malloc*/, size); + + if (ret == NULL) + png_error(png_ptr, "Out of Memory"); /* 'M' means png_malloc_default */ + + return ret; +} +#endif /* PNG_USER_MEM_SUPPORTED */ + +/* This function was added at libpng version 1.2.3. The png_malloc_warn() + * function will issue a png_warning and return NULL instead of issuing a + * png_error, if it fails to allocate the requested memory. + */ +PNG_FUNCTION(png_voidp,PNGAPI +png_malloc_warn,(png_const_structrp png_ptr, png_alloc_size_t size), + PNG_ALLOCATED) +{ + if (png_ptr != NULL) + { + png_voidp ret = png_malloc_base(png_ptr, size); + + if (ret != NULL) + return ret; + + png_warning(png_ptr, "Out of memory"); + } + + return NULL; +} + +/* Free a pointer allocated by png_malloc(). If ptr is NULL, return + * without taking any action. + */ +void PNGAPI +png_free(png_const_structrp png_ptr, png_voidp ptr) +{ + if (png_ptr == NULL || ptr == NULL) + return; + +#ifdef PNG_USER_MEM_SUPPORTED + if (png_ptr->free_fn != NULL) + png_ptr->free_fn(png_constcast(png_structrp,png_ptr), ptr); + + else + png_free_default(png_ptr, ptr); +} + +PNG_FUNCTION(void,PNGAPI +png_free_default,(png_const_structrp png_ptr, png_voidp ptr),PNG_DEPRECATED) +{ + if (png_ptr == NULL || ptr == NULL) + return; +#endif /* PNG_USER_MEM_SUPPORTED */ + + free(ptr); +} + +#ifdef PNG_USER_MEM_SUPPORTED +/* This function is called when the application wants to use another method + * of allocating and freeing memory. + */ +void PNGAPI +png_set_mem_fn(png_structrp png_ptr, png_voidp mem_ptr, png_malloc_ptr + malloc_fn, png_free_ptr free_fn) +{ + if (png_ptr != NULL) + { + png_ptr->mem_ptr = mem_ptr; + png_ptr->malloc_fn = malloc_fn; + png_ptr->free_fn = free_fn; + } +} + +/* This function returns a pointer to the mem_ptr associated with the user + * functions. The application should free any memory associated with this + * pointer before png_write_destroy and png_read_destroy are called. + */ +png_voidp PNGAPI +png_get_mem_ptr(png_const_structrp png_ptr) +{ + if (png_ptr == NULL) + return NULL; + + return png_ptr->mem_ptr; +} +#endif /* PNG_USER_MEM_SUPPORTED */ +#endif /* PNG_READ_SUPPORTED || PNG_WRITE_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngnow.png b/src/SDL2/external/libpng-1.6.2/pngnow.png new file mode 100644 index 0000000000000000000000000000000000000000..82793ebddb7863266a66ffc6ab2c01ca32100808 GIT binary patch literal 2069 zcmWkudpuN&7T#yD z0ALXk%;6bOV2GtAMuxod+KXid08{XL`q<{m10|OLLYbYp~ zqD01zCx~Qa;aTH3$83tYNL5@^&dW%qu3E?~lv;*N57-E2|bs(K#(iIEOmeFx% zkcfvMOG`)&LHQ673#pIPl0s5bu0h@0>CO<}7a`Ws2_Xc#K~M$^F+q|Eqco5dLWna2 z#X^t(LKqoD8nRJmzN=KPsmsFupvRG!&XgFV8A;Y6t95Zm1LFa^q z^92erLk2B|aULIYLrE_dC!DV+A~6Qa3B~AUAmL0W(=n6@Y2+%tkPyj9RsagyA*csN zrps7?xTc~3G=mlSYRm(ZDb=D31>#001TxH*!;$k@LY&S-QNy%At*T6qc|mvuj(MT{ zShXyF6!Ad#Eru11piDK&6sbyVIXSpO33CD}%6q-XYOk*K|bUdDgx`AW{hwjYa zM<-xjEZA^`|H~$2a>8bLQKZ} zLB^Jd#VHvwfGx?~A>ERiCUg3J?OJcAAZbdf6Hk&Nk_fY$mS?2o%GPH}1d{E{WQll1 z=-8g42GdW4aQykf``V&Q6W}O#EGzZC`E*NWZcMk35*qfRc}Z6Nnc{k=W$S9olPI;+ z@nk_TpA-koOx36tuc^5+8y2dJKCX$4z2CENV(>!in*_$fq1N2jW1W6k7j=WW!K2we zQx6hfTZ3TdyW^y&(Mek}jvhFo%!~{*FP%!sE17a%?j{}9boS=;RS0g0Vl+OX*4!KG zS9cV3_T@Rcztag#Ba8Akz?VEN{KY|&-cj^8X4hI9rOS7jb^I*rs9{W6y2#E2G^qzi zdmWmqMl3bFs8=?8X$*f<{;;}lLq--wF|=g=DWXjt<5enf565lt)AmHV zIxOb73llA}$8Ct~8-~_=j#_ZB`OnsJr4>ai);+T_!|ZPhrkXB?{B)};+#9l2+7C4G z(7Hc=^#UXHmZ|>h%+um(yvmbWw|yz{+FO@id!cP~py}<7RoWpJ*Fa-`$lS+tJjBR& z6tlD4Ti8JxCZ9NMtT44qLLkP~+BFVn!|dbm^=AtK$C64)M~7nwq6^V!syIo2Oxw z>Q`G3RCIQRk}|{IuYEXq#p2PEEha{j+{?DX0X|%93;f$J-{g|;y0D)gO{G>+cUcD` z4y@ax<21CZK45QAznB)#Ufr}OXGc|jX9Ltdv+b8XbyW6-6`@zUuVY!hSGtpO`!`Qz z&NQEk%buN|_~W2YVMOhus;$a%yh2m*KG^m|>9yn4nuBHYyEpCJ)0$=kK9Wtr0td+%|?D^-C{{MH<3%xF3Nr{}sKhiFd5L0;yj%{mN`D2E@j zb9elGv{mRmpa=e4(SIT%(x!E1a$=RXWcVrny?jLXA=RCjub+PYvh*imzV73lzO2;z z^IhX}vi&XOSKIaiO6bz9{*4VIPX4pcSiyJsOr)&7MIV0tt;fiC&DW%|Q{u`km5!dp z!Uvmke~-D&46c>G#Z1ofQ!2y69!2#V?{T-pgjb1Z<)$Z0{jJ!Cd*WSVOiYG2O~X$e zkOZV!x9`)jqV>P+UU{SXLBcfJe~UZ${fApm5?rT^HZwk-)*@r4(symdMMs05ch4L& zKD%kQ5%->$aqgk4nHpEI84+blJ(2ds3O8Z;4>JTe4@PSyKg=thMLwxcsc|nVEJ)aH z*B04qWpUia=q@`HDRXoAnzt<~x%EzDW7^4`nuh7CO5MicxId`hJsvyinB5bmk2>6A rInt*5>ynshr7qiTo&3Aj@9hWbNS~fK{3iQ`;bQ_J+;C1~K%(-0k;znQ literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/pngpread.c b/src/SDL2/external/libpng-1.6.2/pngpread.c new file mode 100644 index 000000000..f132ce600 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngpread.c @@ -0,0 +1,1291 @@ + +/* pngpread.c - read a png file in push mode + * + * Last changed in libpng 1.6.0 [February 14, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +#include "pngpriv.h" + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED + +/* Push model modes */ +#define PNG_READ_SIG_MODE 0 +#define PNG_READ_CHUNK_MODE 1 +#define PNG_READ_IDAT_MODE 2 +#define PNG_SKIP_MODE 3 +#define PNG_READ_tEXt_MODE 4 +#define PNG_READ_zTXt_MODE 5 +#define PNG_READ_DONE_MODE 6 +#define PNG_READ_iTXt_MODE 7 +#define PNG_ERROR_MODE 8 + +void PNGAPI +png_process_data(png_structrp png_ptr, png_inforp info_ptr, + png_bytep buffer, png_size_t buffer_size) +{ + if (png_ptr == NULL || info_ptr == NULL) + return; + + png_push_restore_buffer(png_ptr, buffer, buffer_size); + + while (png_ptr->buffer_size) + { + png_process_some_data(png_ptr, info_ptr); + } +} + +png_size_t PNGAPI +png_process_data_pause(png_structrp png_ptr, int save) +{ + if (png_ptr != NULL) + { + /* It's easiest for the caller if we do the save, then the caller doesn't + * have to supply the same data again: + */ + if (save) + png_push_save_buffer(png_ptr); + else + { + /* This includes any pending saved bytes: */ + png_size_t remaining = png_ptr->buffer_size; + png_ptr->buffer_size = 0; + + /* So subtract the saved buffer size, unless all the data + * is actually 'saved', in which case we just return 0 + */ + if (png_ptr->save_buffer_size < remaining) + return remaining - png_ptr->save_buffer_size; + } + } + + return 0; +} + +png_uint_32 PNGAPI +png_process_data_skip(png_structrp png_ptr) +{ + png_uint_32 remaining = 0; + + if (png_ptr != NULL && png_ptr->process_mode == PNG_SKIP_MODE && + png_ptr->skip_length > 0) + { + /* At the end of png_process_data the buffer size must be 0 (see the loop + * above) so we can detect a broken call here: + */ + if (png_ptr->buffer_size != 0) + png_error(png_ptr, + "png_process_data_skip called inside png_process_data"); + + /* If is impossible for there to be a saved buffer at this point - + * otherwise we could not be in SKIP mode. This will also happen if + * png_process_skip is called inside png_process_data (but only very + * rarely.) + */ + if (png_ptr->save_buffer_size != 0) + png_error(png_ptr, "png_process_data_skip called with saved data"); + + remaining = png_ptr->skip_length; + png_ptr->skip_length = 0; + png_ptr->process_mode = PNG_READ_CHUNK_MODE; + } + + return remaining; +} + +/* What we do with the incoming data depends on what we were previously + * doing before we ran out of data... + */ +void /* PRIVATE */ +png_process_some_data(png_structrp png_ptr, png_inforp info_ptr) +{ + if (png_ptr == NULL) + return; + + switch (png_ptr->process_mode) + { + case PNG_READ_SIG_MODE: + { + png_push_read_sig(png_ptr, info_ptr); + break; + } + + case PNG_READ_CHUNK_MODE: + { + png_push_read_chunk(png_ptr, info_ptr); + break; + } + + case PNG_READ_IDAT_MODE: + { + png_push_read_IDAT(png_ptr); + break; + } + + case PNG_SKIP_MODE: + { + png_push_crc_finish(png_ptr); + break; + } + + default: + { + png_ptr->buffer_size = 0; + break; + } + } +} + +/* Read any remaining signature bytes from the stream and compare them with + * the correct PNG signature. It is possible that this routine is called + * with bytes already read from the signature, either because they have been + * checked by the calling application, or because of multiple calls to this + * routine. + */ +void /* PRIVATE */ +png_push_read_sig(png_structrp png_ptr, png_inforp info_ptr) +{ + png_size_t num_checked = png_ptr->sig_bytes, + num_to_check = 8 - num_checked; + + if (png_ptr->buffer_size < num_to_check) + { + num_to_check = png_ptr->buffer_size; + } + + png_push_fill_buffer(png_ptr, &(info_ptr->signature[num_checked]), + num_to_check); + png_ptr->sig_bytes = (png_byte)(png_ptr->sig_bytes + num_to_check); + + if (png_sig_cmp(info_ptr->signature, num_checked, num_to_check)) + { + if (num_checked < 4 && + png_sig_cmp(info_ptr->signature, num_checked, num_to_check - 4)) + png_error(png_ptr, "Not a PNG file"); + + else + png_error(png_ptr, "PNG file corrupted by ASCII conversion"); + } + else + { + if (png_ptr->sig_bytes >= 8) + { + png_ptr->process_mode = PNG_READ_CHUNK_MODE; + } + } +} + +void /* PRIVATE */ +png_push_read_chunk(png_structrp png_ptr, png_inforp info_ptr) +{ + png_uint_32 chunk_name; +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED + int keep; /* unknown handling method */ +#endif + + /* First we make sure we have enough data for the 4 byte chunk name + * and the 4 byte chunk length before proceeding with decoding the + * chunk data. To fully decode each of these chunks, we also make + * sure we have enough data in the buffer for the 4 byte CRC at the + * end of every chunk (except IDAT, which is handled separately). + */ + if (!(png_ptr->mode & PNG_HAVE_CHUNK_HEADER)) + { + png_byte chunk_length[4]; + png_byte chunk_tag[4]; + + if (png_ptr->buffer_size < 8) + { + png_push_save_buffer(png_ptr); + return; + } + + png_push_fill_buffer(png_ptr, chunk_length, 4); + png_ptr->push_length = png_get_uint_31(png_ptr, chunk_length); + png_reset_crc(png_ptr); + png_crc_read(png_ptr, chunk_tag, 4); + png_ptr->chunk_name = PNG_CHUNK_FROM_STRING(chunk_tag); + png_check_chunk_name(png_ptr, png_ptr->chunk_name); + png_ptr->mode |= PNG_HAVE_CHUNK_HEADER; + } + + chunk_name = png_ptr->chunk_name; + + if (chunk_name == png_IDAT) + { + if (png_ptr->mode & PNG_AFTER_IDAT) + png_ptr->mode |= PNG_HAVE_CHUNK_AFTER_IDAT; + + /* If we reach an IDAT chunk, this means we have read all of the + * header chunks, and we can start reading the image (or if this + * is called after the image has been read - we have an error). + */ + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_error(png_ptr, "Missing IHDR before IDAT"); + + else if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE && + !(png_ptr->mode & PNG_HAVE_PLTE)) + png_error(png_ptr, "Missing PLTE before IDAT"); + + png_ptr->mode |= PNG_HAVE_IDAT; + + if (!(png_ptr->mode & PNG_HAVE_CHUNK_AFTER_IDAT)) + if (png_ptr->push_length == 0) + return; + + if (png_ptr->mode & PNG_AFTER_IDAT) + png_benign_error(png_ptr, "Too many IDATs found"); + } + + if (chunk_name == png_IHDR) + { + if (png_ptr->push_length != 13) + png_error(png_ptr, "Invalid IHDR length"); + + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_IHDR(png_ptr, info_ptr, png_ptr->push_length); + } + + else if (chunk_name == png_IEND) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_IEND(png_ptr, info_ptr, png_ptr->push_length); + + png_ptr->process_mode = PNG_READ_DONE_MODE; + png_push_have_end(png_ptr, info_ptr); + } + +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED + else if ((keep = png_chunk_unknown_handling(png_ptr, chunk_name)) != 0) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_unknown(png_ptr, info_ptr, png_ptr->push_length, keep); + + if (chunk_name == png_PLTE) + png_ptr->mode |= PNG_HAVE_PLTE; + } + +#endif + else if (chunk_name == png_PLTE) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + png_handle_PLTE(png_ptr, info_ptr, png_ptr->push_length); + } + + else if (chunk_name == png_IDAT) + { + png_ptr->idat_size = png_ptr->push_length; + png_ptr->process_mode = PNG_READ_IDAT_MODE; + png_push_have_info(png_ptr, info_ptr); + png_ptr->zstream.avail_out = + (uInt) PNG_ROWBYTES(png_ptr->pixel_depth, + png_ptr->iwidth) + 1; + png_ptr->zstream.next_out = png_ptr->row_buf; + return; + } + +#ifdef PNG_READ_gAMA_SUPPORTED + else if (png_ptr->chunk_name == png_gAMA) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_gAMA(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_sBIT_SUPPORTED + else if (png_ptr->chunk_name == png_sBIT) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_sBIT(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_cHRM_SUPPORTED + else if (png_ptr->chunk_name == png_cHRM) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_cHRM(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_sRGB_SUPPORTED + else if (chunk_name == png_sRGB) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_sRGB(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_iCCP_SUPPORTED + else if (png_ptr->chunk_name == png_iCCP) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_iCCP(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_sPLT_SUPPORTED + else if (chunk_name == png_sPLT) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_sPLT(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_tRNS_SUPPORTED + else if (chunk_name == png_tRNS) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_tRNS(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_bKGD_SUPPORTED + else if (chunk_name == png_bKGD) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_bKGD(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_hIST_SUPPORTED + else if (chunk_name == png_hIST) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_hIST(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_pHYs_SUPPORTED + else if (chunk_name == png_pHYs) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_pHYs(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_oFFs_SUPPORTED + else if (chunk_name == png_oFFs) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_oFFs(png_ptr, info_ptr, png_ptr->push_length); + } +#endif + +#ifdef PNG_READ_pCAL_SUPPORTED + else if (chunk_name == png_pCAL) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_pCAL(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_sCAL_SUPPORTED + else if (chunk_name == png_sCAL) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_sCAL(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_tIME_SUPPORTED + else if (chunk_name == png_tIME) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_tIME(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_tEXt_SUPPORTED + else if (chunk_name == png_tEXt) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_tEXt(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_zTXt_SUPPORTED + else if (chunk_name == png_zTXt) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_zTXt(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif +#ifdef PNG_READ_iTXt_SUPPORTED + else if (chunk_name == png_iTXt) + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + + png_handle_iTXt(png_ptr, info_ptr, png_ptr->push_length); + } + +#endif + else + { + if (png_ptr->push_length + 4 > png_ptr->buffer_size) + { + png_push_save_buffer(png_ptr); + return; + } + png_handle_unknown(png_ptr, info_ptr, png_ptr->push_length, + PNG_HANDLE_CHUNK_AS_DEFAULT); + } + + png_ptr->mode &= ~PNG_HAVE_CHUNK_HEADER; +} + +void /* PRIVATE */ +png_push_crc_skip(png_structrp png_ptr, png_uint_32 skip) +{ + png_ptr->process_mode = PNG_SKIP_MODE; + png_ptr->skip_length = skip; +} + +void /* PRIVATE */ +png_push_crc_finish(png_structrp png_ptr) +{ + if (png_ptr->skip_length && png_ptr->save_buffer_size) + { + png_size_t save_size = png_ptr->save_buffer_size; + png_uint_32 skip_length = png_ptr->skip_length; + + /* We want the smaller of 'skip_length' and 'save_buffer_size', but + * they are of different types and we don't know which variable has the + * fewest bits. Carefully select the smaller and cast it to the type of + * the larger - this cannot overflow. Do not cast in the following test + * - it will break on either 16 or 64 bit platforms. + */ + if (skip_length < save_size) + save_size = (png_size_t)skip_length; + + else + skip_length = (png_uint_32)save_size; + + png_calculate_crc(png_ptr, png_ptr->save_buffer_ptr, save_size); + + png_ptr->skip_length -= skip_length; + png_ptr->buffer_size -= save_size; + png_ptr->save_buffer_size -= save_size; + png_ptr->save_buffer_ptr += save_size; + } + if (png_ptr->skip_length && png_ptr->current_buffer_size) + { + png_size_t save_size = png_ptr->current_buffer_size; + png_uint_32 skip_length = png_ptr->skip_length; + + /* We want the smaller of 'skip_length' and 'current_buffer_size', here, + * the same problem exists as above and the same solution. + */ + if (skip_length < save_size) + save_size = (png_size_t)skip_length; + + else + skip_length = (png_uint_32)save_size; + + png_calculate_crc(png_ptr, png_ptr->current_buffer_ptr, save_size); + + png_ptr->skip_length -= skip_length; + png_ptr->buffer_size -= save_size; + png_ptr->current_buffer_size -= save_size; + png_ptr->current_buffer_ptr += save_size; + } + if (!png_ptr->skip_length) + { + if (png_ptr->buffer_size < 4) + { + png_push_save_buffer(png_ptr); + return; + } + + png_crc_finish(png_ptr, 0); + png_ptr->process_mode = PNG_READ_CHUNK_MODE; + } +} + +void PNGCBAPI +png_push_fill_buffer(png_structp png_ptr, png_bytep buffer, png_size_t length) +{ + png_bytep ptr; + + if (png_ptr == NULL) + return; + + ptr = buffer; + if (png_ptr->save_buffer_size) + { + png_size_t save_size; + + if (length < png_ptr->save_buffer_size) + save_size = length; + + else + save_size = png_ptr->save_buffer_size; + + memcpy(ptr, png_ptr->save_buffer_ptr, save_size); + length -= save_size; + ptr += save_size; + png_ptr->buffer_size -= save_size; + png_ptr->save_buffer_size -= save_size; + png_ptr->save_buffer_ptr += save_size; + } + if (length && png_ptr->current_buffer_size) + { + png_size_t save_size; + + if (length < png_ptr->current_buffer_size) + save_size = length; + + else + save_size = png_ptr->current_buffer_size; + + memcpy(ptr, png_ptr->current_buffer_ptr, save_size); + png_ptr->buffer_size -= save_size; + png_ptr->current_buffer_size -= save_size; + png_ptr->current_buffer_ptr += save_size; + } +} + +void /* PRIVATE */ +png_push_save_buffer(png_structrp png_ptr) +{ + if (png_ptr->save_buffer_size) + { + if (png_ptr->save_buffer_ptr != png_ptr->save_buffer) + { + png_size_t i, istop; + png_bytep sp; + png_bytep dp; + + istop = png_ptr->save_buffer_size; + for (i = 0, sp = png_ptr->save_buffer_ptr, dp = png_ptr->save_buffer; + i < istop; i++, sp++, dp++) + { + *dp = *sp; + } + } + } + if (png_ptr->save_buffer_size + png_ptr->current_buffer_size > + png_ptr->save_buffer_max) + { + png_size_t new_max; + png_bytep old_buffer; + + if (png_ptr->save_buffer_size > PNG_SIZE_MAX - + (png_ptr->current_buffer_size + 256)) + { + png_error(png_ptr, "Potential overflow of save_buffer"); + } + + new_max = png_ptr->save_buffer_size + png_ptr->current_buffer_size + 256; + old_buffer = png_ptr->save_buffer; + png_ptr->save_buffer = (png_bytep)png_malloc_warn(png_ptr, + (png_size_t)new_max); + + if (png_ptr->save_buffer == NULL) + { + png_free(png_ptr, old_buffer); + png_error(png_ptr, "Insufficient memory for save_buffer"); + } + + memcpy(png_ptr->save_buffer, old_buffer, png_ptr->save_buffer_size); + png_free(png_ptr, old_buffer); + png_ptr->save_buffer_max = new_max; + } + if (png_ptr->current_buffer_size) + { + memcpy(png_ptr->save_buffer + png_ptr->save_buffer_size, + png_ptr->current_buffer_ptr, png_ptr->current_buffer_size); + png_ptr->save_buffer_size += png_ptr->current_buffer_size; + png_ptr->current_buffer_size = 0; + } + png_ptr->save_buffer_ptr = png_ptr->save_buffer; + png_ptr->buffer_size = 0; +} + +void /* PRIVATE */ +png_push_restore_buffer(png_structrp png_ptr, png_bytep buffer, + png_size_t buffer_length) +{ + png_ptr->current_buffer = buffer; + png_ptr->current_buffer_size = buffer_length; + png_ptr->buffer_size = buffer_length + png_ptr->save_buffer_size; + png_ptr->current_buffer_ptr = png_ptr->current_buffer; +} + +void /* PRIVATE */ +png_push_read_IDAT(png_structrp png_ptr) +{ + if (!(png_ptr->mode & PNG_HAVE_CHUNK_HEADER)) + { + png_byte chunk_length[4]; + png_byte chunk_tag[4]; + + /* TODO: this code can be commoned up with the same code in push_read */ + if (png_ptr->buffer_size < 8) + { + png_push_save_buffer(png_ptr); + return; + } + + png_push_fill_buffer(png_ptr, chunk_length, 4); + png_ptr->push_length = png_get_uint_31(png_ptr, chunk_length); + png_reset_crc(png_ptr); + png_crc_read(png_ptr, chunk_tag, 4); + png_ptr->chunk_name = PNG_CHUNK_FROM_STRING(chunk_tag); + png_ptr->mode |= PNG_HAVE_CHUNK_HEADER; + + if (png_ptr->chunk_name != png_IDAT) + { + png_ptr->process_mode = PNG_READ_CHUNK_MODE; + + if (!(png_ptr->flags & PNG_FLAG_ZSTREAM_ENDED)) + png_error(png_ptr, "Not enough compressed data"); + + return; + } + + png_ptr->idat_size = png_ptr->push_length; + } + + if (png_ptr->idat_size && png_ptr->save_buffer_size) + { + png_size_t save_size = png_ptr->save_buffer_size; + png_uint_32 idat_size = png_ptr->idat_size; + + /* We want the smaller of 'idat_size' and 'current_buffer_size', but they + * are of different types and we don't know which variable has the fewest + * bits. Carefully select the smaller and cast it to the type of the + * larger - this cannot overflow. Do not cast in the following test - it + * will break on either 16 or 64 bit platforms. + */ + if (idat_size < save_size) + save_size = (png_size_t)idat_size; + + else + idat_size = (png_uint_32)save_size; + + png_calculate_crc(png_ptr, png_ptr->save_buffer_ptr, save_size); + + png_process_IDAT_data(png_ptr, png_ptr->save_buffer_ptr, save_size); + + png_ptr->idat_size -= idat_size; + png_ptr->buffer_size -= save_size; + png_ptr->save_buffer_size -= save_size; + png_ptr->save_buffer_ptr += save_size; + } + + if (png_ptr->idat_size && png_ptr->current_buffer_size) + { + png_size_t save_size = png_ptr->current_buffer_size; + png_uint_32 idat_size = png_ptr->idat_size; + + /* We want the smaller of 'idat_size' and 'current_buffer_size', but they + * are of different types and we don't know which variable has the fewest + * bits. Carefully select the smaller and cast it to the type of the + * larger - this cannot overflow. + */ + if (idat_size < save_size) + save_size = (png_size_t)idat_size; + + else + idat_size = (png_uint_32)save_size; + + png_calculate_crc(png_ptr, png_ptr->current_buffer_ptr, save_size); + + png_process_IDAT_data(png_ptr, png_ptr->current_buffer_ptr, save_size); + + png_ptr->idat_size -= idat_size; + png_ptr->buffer_size -= save_size; + png_ptr->current_buffer_size -= save_size; + png_ptr->current_buffer_ptr += save_size; + } + if (!png_ptr->idat_size) + { + if (png_ptr->buffer_size < 4) + { + png_push_save_buffer(png_ptr); + return; + } + + png_crc_finish(png_ptr, 0); + png_ptr->mode &= ~PNG_HAVE_CHUNK_HEADER; + png_ptr->mode |= PNG_AFTER_IDAT; + png_ptr->zowner = 0; + } +} + +void /* PRIVATE */ +png_process_IDAT_data(png_structrp png_ptr, png_bytep buffer, + png_size_t buffer_length) +{ + /* The caller checks for a non-zero buffer length. */ + if (!(buffer_length > 0) || buffer == NULL) + png_error(png_ptr, "No IDAT data (internal error)"); + + /* This routine must process all the data it has been given + * before returning, calling the row callback as required to + * handle the uncompressed results. + */ + png_ptr->zstream.next_in = buffer; + /* TODO: WARNING: TRUNCATION ERROR: DANGER WILL ROBINSON: */ + png_ptr->zstream.avail_in = (uInt)buffer_length; + + /* Keep going until the decompressed data is all processed + * or the stream marked as finished. + */ + while (png_ptr->zstream.avail_in > 0 && + !(png_ptr->flags & PNG_FLAG_ZSTREAM_ENDED)) + { + int ret; + + /* We have data for zlib, but we must check that zlib + * has someplace to put the results. It doesn't matter + * if we don't expect any results -- it may be the input + * data is just the LZ end code. + */ + if (!(png_ptr->zstream.avail_out > 0)) + { + /* TODO: WARNING: TRUNCATION ERROR: DANGER WILL ROBINSON: */ + png_ptr->zstream.avail_out = (uInt)(PNG_ROWBYTES(png_ptr->pixel_depth, + png_ptr->iwidth) + 1); + + png_ptr->zstream.next_out = png_ptr->row_buf; + } + + /* Using Z_SYNC_FLUSH here means that an unterminated + * LZ stream (a stream with a missing end code) can still + * be handled, otherwise (Z_NO_FLUSH) a future zlib + * implementation might defer output and therefore + * change the current behavior (see comments in inflate.c + * for why this doesn't happen at present with zlib 1.2.5). + */ + ret = inflate(&png_ptr->zstream, Z_SYNC_FLUSH); + + /* Check for any failure before proceeding. */ + if (ret != Z_OK && ret != Z_STREAM_END) + { + /* Terminate the decompression. */ + png_ptr->flags |= PNG_FLAG_ZSTREAM_ENDED; + png_ptr->zowner = 0; + + /* This may be a truncated stream (missing or + * damaged end code). Treat that as a warning. + */ + if (png_ptr->row_number >= png_ptr->num_rows || + png_ptr->pass > 6) + png_warning(png_ptr, "Truncated compressed data in IDAT"); + + else + png_error(png_ptr, "Decompression error in IDAT"); + + /* Skip the check on unprocessed input */ + return; + } + + /* Did inflate output any data? */ + if (png_ptr->zstream.next_out != png_ptr->row_buf) + { + /* Is this unexpected data after the last row? + * If it is, artificially terminate the LZ output + * here. + */ + if (png_ptr->row_number >= png_ptr->num_rows || + png_ptr->pass > 6) + { + /* Extra data. */ + png_warning(png_ptr, "Extra compressed data in IDAT"); + png_ptr->flags |= PNG_FLAG_ZSTREAM_ENDED; + png_ptr->zowner = 0; + + /* Do no more processing; skip the unprocessed + * input check below. + */ + return; + } + + /* Do we have a complete row? */ + if (png_ptr->zstream.avail_out == 0) + png_push_process_row(png_ptr); + } + + /* And check for the end of the stream. */ + if (ret == Z_STREAM_END) + png_ptr->flags |= PNG_FLAG_ZSTREAM_ENDED; + } + + /* All the data should have been processed, if anything + * is left at this point we have bytes of IDAT data + * after the zlib end code. + */ + if (png_ptr->zstream.avail_in > 0) + png_warning(png_ptr, "Extra compression data in IDAT"); +} + +void /* PRIVATE */ +png_push_process_row(png_structrp png_ptr) +{ + /* 1.5.6: row_info moved out of png_struct to a local here. */ + png_row_info row_info; + + row_info.width = png_ptr->iwidth; /* NOTE: width of current interlaced row */ + row_info.color_type = png_ptr->color_type; + row_info.bit_depth = png_ptr->bit_depth; + row_info.channels = png_ptr->channels; + row_info.pixel_depth = png_ptr->pixel_depth; + row_info.rowbytes = PNG_ROWBYTES(row_info.pixel_depth, row_info.width); + + if (png_ptr->row_buf[0] > PNG_FILTER_VALUE_NONE) + { + if (png_ptr->row_buf[0] < PNG_FILTER_VALUE_LAST) + png_read_filter_row(png_ptr, &row_info, png_ptr->row_buf + 1, + png_ptr->prev_row + 1, png_ptr->row_buf[0]); + else + png_error(png_ptr, "bad adaptive filter value"); + } + + /* libpng 1.5.6: the following line was copying png_ptr->rowbytes before + * 1.5.6, while the buffer really is this big in current versions of libpng + * it may not be in the future, so this was changed just to copy the + * interlaced row count: + */ + memcpy(png_ptr->prev_row, png_ptr->row_buf, row_info.rowbytes + 1); + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED + if (png_ptr->transformations) + png_do_read_transformations(png_ptr, &row_info); +#endif + + /* The transformed pixel depth should match the depth now in row_info. */ + if (png_ptr->transformed_pixel_depth == 0) + { + png_ptr->transformed_pixel_depth = row_info.pixel_depth; + if (row_info.pixel_depth > png_ptr->maximum_pixel_depth) + png_error(png_ptr, "progressive row overflow"); + } + + else if (png_ptr->transformed_pixel_depth != row_info.pixel_depth) + png_error(png_ptr, "internal progressive row size calculation error"); + + +#ifdef PNG_READ_INTERLACING_SUPPORTED + /* Blow up interlaced rows to full size */ + if (png_ptr->interlaced && (png_ptr->transformations & PNG_INTERLACE)) + { + if (png_ptr->pass < 6) + png_do_read_interlace(&row_info, png_ptr->row_buf + 1, png_ptr->pass, + png_ptr->transformations); + + switch (png_ptr->pass) + { + case 0: + { + int i; + for (i = 0; i < 8 && png_ptr->pass == 0; i++) + { + png_push_have_row(png_ptr, png_ptr->row_buf + 1); + png_read_push_finish_row(png_ptr); /* Updates png_ptr->pass */ + } + + if (png_ptr->pass == 2) /* Pass 1 might be empty */ + { + for (i = 0; i < 4 && png_ptr->pass == 2; i++) + { + png_push_have_row(png_ptr, NULL); + png_read_push_finish_row(png_ptr); + } + } + + if (png_ptr->pass == 4 && png_ptr->height <= 4) + { + for (i = 0; i < 2 && png_ptr->pass == 4; i++) + { + png_push_have_row(png_ptr, NULL); + png_read_push_finish_row(png_ptr); + } + } + + if (png_ptr->pass == 6 && png_ptr->height <= 4) + { + png_push_have_row(png_ptr, NULL); + png_read_push_finish_row(png_ptr); + } + + break; + } + + case 1: + { + int i; + for (i = 0; i < 8 && png_ptr->pass == 1; i++) + { + png_push_have_row(png_ptr, png_ptr->row_buf + 1); + png_read_push_finish_row(png_ptr); + } + + if (png_ptr->pass == 2) /* Skip top 4 generated rows */ + { + for (i = 0; i < 4 && png_ptr->pass == 2; i++) + { + png_push_have_row(png_ptr, NULL); + png_read_push_finish_row(png_ptr); + } + } + + break; + } + + case 2: + { + int i; + + for (i = 0; i < 4 && png_ptr->pass == 2; i++) + { + png_push_have_row(png_ptr, png_ptr->row_buf + 1); + png_read_push_finish_row(png_ptr); + } + + for (i = 0; i < 4 && png_ptr->pass == 2; i++) + { + png_push_have_row(png_ptr, NULL); + png_read_push_finish_row(png_ptr); + } + + if (png_ptr->pass == 4) /* Pass 3 might be empty */ + { + for (i = 0; i < 2 && png_ptr->pass == 4; i++) + { + png_push_have_row(png_ptr, NULL); + png_read_push_finish_row(png_ptr); + } + } + + break; + } + + case 3: + { + int i; + + for (i = 0; i < 4 && png_ptr->pass == 3; i++) + { + png_push_have_row(png_ptr, png_ptr->row_buf + 1); + png_read_push_finish_row(png_ptr); + } + + if (png_ptr->pass == 4) /* Skip top two generated rows */ + { + for (i = 0; i < 2 && png_ptr->pass == 4; i++) + { + png_push_have_row(png_ptr, NULL); + png_read_push_finish_row(png_ptr); + } + } + + break; + } + + case 4: + { + int i; + + for (i = 0; i < 2 && png_ptr->pass == 4; i++) + { + png_push_have_row(png_ptr, png_ptr->row_buf + 1); + png_read_push_finish_row(png_ptr); + } + + for (i = 0; i < 2 && png_ptr->pass == 4; i++) + { + png_push_have_row(png_ptr, NULL); + png_read_push_finish_row(png_ptr); + } + + if (png_ptr->pass == 6) /* Pass 5 might be empty */ + { + png_push_have_row(png_ptr, NULL); + png_read_push_finish_row(png_ptr); + } + + break; + } + + case 5: + { + int i; + + for (i = 0; i < 2 && png_ptr->pass == 5; i++) + { + png_push_have_row(png_ptr, png_ptr->row_buf + 1); + png_read_push_finish_row(png_ptr); + } + + if (png_ptr->pass == 6) /* Skip top generated row */ + { + png_push_have_row(png_ptr, NULL); + png_read_push_finish_row(png_ptr); + } + + break; + } + + default: + case 6: + { + png_push_have_row(png_ptr, png_ptr->row_buf + 1); + png_read_push_finish_row(png_ptr); + + if (png_ptr->pass != 6) + break; + + png_push_have_row(png_ptr, NULL); + png_read_push_finish_row(png_ptr); + } + } + } + else +#endif + { + png_push_have_row(png_ptr, png_ptr->row_buf + 1); + png_read_push_finish_row(png_ptr); + } +} + +void /* PRIVATE */ +png_read_push_finish_row(png_structrp png_ptr) +{ +#ifdef PNG_READ_INTERLACING_SUPPORTED + /* Arrays to facilitate easy interlacing - use pass (0 - 6) as index */ + + /* Start of interlace block */ + static PNG_CONST png_byte png_pass_start[] = {0, 4, 0, 2, 0, 1, 0}; + + /* Offset to next interlace block */ + static PNG_CONST png_byte png_pass_inc[] = {8, 8, 4, 4, 2, 2, 1}; + + /* Start of interlace block in the y direction */ + static PNG_CONST png_byte png_pass_ystart[] = {0, 0, 4, 0, 2, 0, 1}; + + /* Offset to next interlace block in the y direction */ + static PNG_CONST png_byte png_pass_yinc[] = {8, 8, 8, 4, 4, 2, 2}; + + /* Height of interlace block. This is not currently used - if you need + * it, uncomment it here and in png.h + static PNG_CONST png_byte png_pass_height[] = {8, 8, 4, 4, 2, 2, 1}; + */ +#endif + + png_ptr->row_number++; + if (png_ptr->row_number < png_ptr->num_rows) + return; + +#ifdef PNG_READ_INTERLACING_SUPPORTED + if (png_ptr->interlaced) + { + png_ptr->row_number = 0; + memset(png_ptr->prev_row, 0, png_ptr->rowbytes + 1); + + do + { + png_ptr->pass++; + if ((png_ptr->pass == 1 && png_ptr->width < 5) || + (png_ptr->pass == 3 && png_ptr->width < 3) || + (png_ptr->pass == 5 && png_ptr->width < 2)) + png_ptr->pass++; + + if (png_ptr->pass > 7) + png_ptr->pass--; + + if (png_ptr->pass >= 7) + break; + + png_ptr->iwidth = (png_ptr->width + + png_pass_inc[png_ptr->pass] - 1 - + png_pass_start[png_ptr->pass]) / + png_pass_inc[png_ptr->pass]; + + if (png_ptr->transformations & PNG_INTERLACE) + break; + + png_ptr->num_rows = (png_ptr->height + + png_pass_yinc[png_ptr->pass] - 1 - + png_pass_ystart[png_ptr->pass]) / + png_pass_yinc[png_ptr->pass]; + + } while (png_ptr->iwidth == 0 || png_ptr->num_rows == 0); + } +#endif /* PNG_READ_INTERLACING_SUPPORTED */ +} + +void /* PRIVATE */ +png_push_have_info(png_structrp png_ptr, png_inforp info_ptr) +{ + if (png_ptr->info_fn != NULL) + (*(png_ptr->info_fn))(png_ptr, info_ptr); +} + +void /* PRIVATE */ +png_push_have_end(png_structrp png_ptr, png_inforp info_ptr) +{ + if (png_ptr->end_fn != NULL) + (*(png_ptr->end_fn))(png_ptr, info_ptr); +} + +void /* PRIVATE */ +png_push_have_row(png_structrp png_ptr, png_bytep row) +{ + if (png_ptr->row_fn != NULL) + (*(png_ptr->row_fn))(png_ptr, row, png_ptr->row_number, + (int)png_ptr->pass); +} + +#ifdef PNG_READ_INTERLACING_SUPPORTED +void PNGAPI +png_progressive_combine_row(png_const_structrp png_ptr, png_bytep old_row, + png_const_bytep new_row) +{ + if (png_ptr == NULL) + return; + + /* new_row is a flag here - if it is NULL then the app callback was called + * from an empty row (see the calls to png_struct::row_fn below), otherwise + * it must be png_ptr->row_buf+1 + */ + if (new_row != NULL) + png_combine_row(png_ptr, old_row, 1/*display*/); +} +#endif /* PNG_READ_INTERLACING_SUPPORTED */ + +void PNGAPI +png_set_progressive_read_fn(png_structrp png_ptr, png_voidp progressive_ptr, + png_progressive_info_ptr info_fn, png_progressive_row_ptr row_fn, + png_progressive_end_ptr end_fn) +{ + if (png_ptr == NULL) + return; + + png_ptr->info_fn = info_fn; + png_ptr->row_fn = row_fn; + png_ptr->end_fn = end_fn; + + png_set_read_fn(png_ptr, progressive_ptr, png_push_fill_buffer); +} + +png_voidp PNGAPI +png_get_progressive_ptr(png_const_structrp png_ptr) +{ + if (png_ptr == NULL) + return (NULL); + + return png_ptr->io_ptr; +} +#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngpriv.h b/src/SDL2/external/libpng-1.6.2/pngpriv.h new file mode 100644 index 000000000..d06284d1e --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngpriv.h @@ -0,0 +1,1913 @@ + +/* pngpriv.h - private declarations for use inside libpng + * + * For conditions of distribution and use, see copyright notice in png.h + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * Last changed in libpng 1.6.2 [April 25, 2013] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +/* The symbols declared in this file (including the functions declared + * as extern) are PRIVATE. They are not part of the libpng public + * interface, and are not recommended for use by regular applications. + * Some of them may become public in the future; others may stay private, + * change in an incompatible way, or even disappear. + * Although the libpng users are not forbidden to include this header, + * they should be well aware of the issues that may arise from doing so. + */ + +#ifndef PNGPRIV_H +#define PNGPRIV_H + +/* Feature Test Macros. The following are defined here to ensure that correctly + * implemented libraries reveal the APIs libpng needs to build and hide those + * that are not needed and potentially damaging to the compilation. + * + * Feature Test Macros must be defined before any system header is included (see + * POSIX 1003.1 2.8.2 "POSIX Symbols." + * + * These macros only have an effect if the operating system supports either + * POSIX 1003.1 or C99, or both. On other operating systems (particularly + * Windows/Visual Studio) there is no effect; the OS specific tests below are + * still required (as of 2011-05-02.) + */ +#define _POSIX_SOURCE 1 /* Just the POSIX 1003.1 and C89 APIs */ + +#ifndef PNG_VERSION_INFO_ONLY +/* Standard library headers not required by png.h: */ +# include +# include +#endif + +#define PNGLIB_BUILD /*libpng is being built, not used*/ + +/* If HAVE_CONFIG_H is defined during the build then the build system must + * provide an appropriate "config.h" file on the include path. The header file + * must provide definitions as required below (search for "HAVE_CONFIG_H"); + * see configure.ac for more details of the requirements. The macro + * "PNG_NO_CONFIG_H" is provided for maintainers to test for dependencies on + * 'configure'; define this macro to prevent the configure build including the + * configure generated config.h. Libpng is expected to compile without *any* + * special build system support on a reasonably ANSI-C compliant system. + */ +#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) +# include + + /* Pick up the definition of 'restrict' from config.h if it was read: */ +# define PNG_RESTRICT restrict +#endif + +/* To support symbol prefixing it is necessary to know *before* including png.h + * whether the fixed point (and maybe other) APIs are exported, because if they + * are not internal definitions may be required. This is handled below just + * before png.h is included, but load the configuration now if it is available. + */ +#ifndef PNGLCONF_H +# include "pnglibconf.h" +#endif + +/* Local renames may change non-exported API functions from png.h */ +#if defined(PNG_PREFIX) && !defined(PNGPREFIX_H) +# include "pngprefix.h" +#endif + +#ifdef PNG_USER_CONFIG +# include "pngusr.h" + /* These should have been defined in pngusr.h */ +# ifndef PNG_USER_PRIVATEBUILD +# define PNG_USER_PRIVATEBUILD "Custom libpng build" +# endif +# ifndef PNG_USER_DLLFNAME_POSTFIX +# define PNG_USER_DLLFNAME_POSTFIX "Cb" +# endif +#endif + +/* Is this a build of a DLL where compilation of the object modules requires + * different preprocessor settings to those required for a simple library? If + * so PNG_BUILD_DLL must be set. + * + * If libpng is used inside a DLL but that DLL does not export the libpng APIs + * PNG_BUILD_DLL must not be set. To avoid the code below kicking in build a + * static library of libpng then link the DLL against that. + */ +#ifndef PNG_BUILD_DLL +# ifdef DLL_EXPORT + /* This is set by libtool when files are compiled for a DLL; libtool + * always compiles twice, even on systems where it isn't necessary. Set + * PNG_BUILD_DLL in case it is necessary: + */ +# define PNG_BUILD_DLL +# else +# ifdef _WINDLL + /* This is set by the Microsoft Visual Studio IDE in projects that + * build a DLL. It can't easily be removed from those projects (it + * isn't visible in the Visual Studio UI) so it is a fairly reliable + * indication that PNG_IMPEXP needs to be set to the DLL export + * attributes. + */ +# define PNG_BUILD_DLL +# else +# ifdef __DLL__ + /* This is set by the Borland C system when compiling for a DLL + * (as above.) + */ +# define PNG_BUILD_DLL +# else + /* Add additional compiler cases here. */ +# endif +# endif +# endif +#endif /* Setting PNG_BUILD_DLL if required */ + +/* See pngconf.h for more details: the builder of the library may set this on + * the command line to the right thing for the specific compilation system or it + * may be automagically set above (at present we know of no system where it does + * need to be set on the command line.) + * + * PNG_IMPEXP must be set here when building the library to prevent pngconf.h + * setting it to the "import" setting for a DLL build. + */ +#ifndef PNG_IMPEXP +# ifdef PNG_BUILD_DLL +# define PNG_IMPEXP PNG_DLL_EXPORT +# else + /* Not building a DLL, or the DLL doesn't require specific export + * definitions. + */ +# define PNG_IMPEXP +# endif +#endif + +/* No warnings for private or deprecated functions in the build: */ +#ifndef PNG_DEPRECATED +# define PNG_DEPRECATED +#endif +#ifndef PNG_PRIVATE +# define PNG_PRIVATE +#endif + +/* Symbol preprocessing support. + * + * To enable listing global, but internal, symbols the following macros should + * always be used to declare an extern data or function object in this file. + */ +#ifndef PNG_INTERNAL_DATA +# define PNG_INTERNAL_DATA(type, name, array) extern type name array +#endif + +#ifndef PNG_INTERNAL_FUNCTION +# define PNG_INTERNAL_FUNCTION(type, name, args, attributes)\ + extern PNG_FUNCTION(type, name, args, PNG_EMPTY attributes) +#endif + +/* If floating or fixed point APIs are disabled they may still be compiled + * internally. To handle this make sure they are declared as the appropriate + * internal extern function (otherwise the symbol prefixing stuff won't work and + * the functions will be used without definitions.) + * + * NOTE: although all the API functions are declared here they are not all + * actually built! Because the declarations are still made it is necessary to + * fake out types that they depend on. + */ +#ifndef PNG_FP_EXPORT +# ifndef PNG_FLOATING_POINT_SUPPORTED +# define PNG_FP_EXPORT(ordinal, type, name, args)\ + PNG_INTERNAL_FUNCTION(type, name, args, PNG_EMPTY); +# ifndef PNG_VERSION_INFO_ONLY + typedef struct png_incomplete png_double; + typedef png_double* png_doublep; + typedef const png_double* png_const_doublep; + typedef png_double** png_doublepp; +# endif +# endif +#endif +#ifndef PNG_FIXED_EXPORT +# ifndef PNG_FIXED_POINT_SUPPORTED +# define PNG_FIXED_EXPORT(ordinal, type, name, args)\ + PNG_INTERNAL_FUNCTION(type, name, args, PNG_EMPTY); +# endif +#endif + +#include "png.h" + +/* pngconf.h does not set PNG_DLL_EXPORT unless it is required, so: */ +#ifndef PNG_DLL_EXPORT +# define PNG_DLL_EXPORT +#endif + +/* SECURITY and SAFETY: + * + * By default libpng is built without any internal limits on image size, + * individual heap (png_malloc) allocations or the total amount of memory used. + * If PNG_SAFE_LIMITS_SUPPORTED is defined, however, the limits below are used + * (unless individually overridden). These limits are believed to be fairly + * safe, but builders of secure systems should verify the values against the + * real system capabilities. + */ +#ifdef PNG_SAFE_LIMITS_SUPPORTED + /* 'safe' limits */ +# ifndef PNG_USER_WIDTH_MAX +# define PNG_USER_WIDTH_MAX 1000000 +# endif +# ifndef PNG_USER_HEIGHT_MAX +# define PNG_USER_HEIGHT_MAX 1000000 +# endif +# ifndef PNG_USER_CHUNK_CACHE_MAX +# define PNG_USER_CHUNK_CACHE_MAX 128 +# endif +# ifndef PNG_USER_CHUNK_MALLOC_MAX +# define PNG_USER_CHUNK_MALLOC_MAX 8000000 +# endif +#else + /* values for no limits */ +# ifndef PNG_USER_WIDTH_MAX +# define PNG_USER_WIDTH_MAX 0x7fffffff +# endif +# ifndef PNG_USER_HEIGHT_MAX +# define PNG_USER_HEIGHT_MAX 0x7fffffff +# endif +# ifndef PNG_USER_CHUNK_CACHE_MAX +# define PNG_USER_CHUNK_CACHE_MAX 0 +# endif +# ifndef PNG_USER_CHUNK_MALLOC_MAX +# define PNG_USER_CHUNK_MALLOC_MAX 0 +# endif +#endif + +/* Moved to pngpriv.h at libpng-1.5.0 */ +/* NOTE: some of these may have been used in external applications as + * these definitions were exposed in pngconf.h prior to 1.5. + */ + +/* If you are running on a machine where you cannot allocate more + * than 64K of memory at once, uncomment this. While libpng will not + * normally need that much memory in a chunk (unless you load up a very + * large file), zlib needs to know how big of a chunk it can use, and + * libpng thus makes sure to check any memory allocation to verify it + * will fit into memory. + * + * zlib provides 'MAXSEG_64K' which, if defined, indicates the + * same limit and pngconf.h (already included) sets the limit + * if certain operating systems are detected. + */ +#if defined(MAXSEG_64K) && !defined(PNG_MAX_MALLOC_64K) +# define PNG_MAX_MALLOC_64K +#endif + +#ifndef PNG_UNUSED +/* Unused formal parameter warnings are silenced using the following macro + * which is expected to have no bad effects on performance (optimizing + * compilers will probably remove it entirely). Note that if you replace + * it with something other than whitespace, you must include the terminating + * semicolon. + */ +# define PNG_UNUSED(param) (void)param; +#endif + +/* Just a little check that someone hasn't tried to define something + * contradictory. + */ +#if (PNG_ZBUF_SIZE > 65536L) && defined(PNG_MAX_MALLOC_64K) +# undef PNG_ZBUF_SIZE +# define PNG_ZBUF_SIZE 65536L +#endif + +/* If warnings or errors are turned off the code is disabled or redirected here. + * From 1.5.4 functions have been added to allow very limited formatting of + * error and warning messages - this code will also be disabled here. + */ +#ifdef PNG_WARNINGS_SUPPORTED +# define PNG_WARNING_PARAMETERS(p) png_warning_parameters p; +#else +# define png_warning(s1,s2) ((void)(s1)) +# define png_chunk_warning(s1,s2) ((void)(s1)) +# define png_warning_parameter(p,number,string) ((void)0) +# define png_warning_parameter_unsigned(p,number,format,value) ((void)0) +# define png_warning_parameter_signed(p,number,format,value) ((void)0) +# define png_formatted_warning(pp,p,message) ((void)(pp)) +# define PNG_WARNING_PARAMETERS(p) +#endif +#ifndef PNG_ERROR_TEXT_SUPPORTED +# define png_error(s1,s2) png_err(s1) +# define png_chunk_error(s1,s2) png_err(s1) +# define png_fixed_error(s1,s2) png_err(s1) +#endif + +/* C allows up-casts from (void*) to any pointer and (const void*) to any + * pointer to a const object. C++ regards this as a type error and requires an + * explicit, static, cast and provides the static_cast<> rune to ensure that + * const is not cast away. + */ +#ifdef __cplusplus +# define png_voidcast(type, value) static_cast(value) +# define png_constcast(type, value) const_cast(value) +# define png_aligncast(type, value) \ + static_cast(static_cast(value)) +# define png_aligncastconst(type, value) \ + static_cast(static_cast(value)) +#else +# define png_voidcast(type, value) (value) +# define png_constcast(type, value) ((type)(value)) +# define png_aligncast(type, value) ((void*)(value)) +# define png_aligncastconst(type, value) ((const void*)(value)) +#endif /* __cplusplus */ + +/* Some fixed point APIs are still required even if not exported because + * they get used by the corresponding floating point APIs. This magic + * deals with this: + */ +#ifdef PNG_FIXED_POINT_SUPPORTED +# define PNGFAPI PNGAPI +#else +# define PNGFAPI /* PRIVATE */ +#endif + +#ifndef PNG_VERSION_INFO_ONLY +/* Other defines specific to compilers can go here. Try to keep + * them inside an appropriate ifdef/endif pair for portability. + */ +#if defined(PNG_FLOATING_POINT_SUPPORTED) ||\ + defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) + /* png.c requires the following ANSI-C constants if the conversion of + * floating point to ASCII is implemented therein: + * + * DBL_DIG Maximum number of decimal digits (can be set to any constant) + * DBL_MIN Smallest normalized fp number (can be set to an arbitrary value) + * DBL_MAX Maximum floating point number (can be set to an arbitrary value) + */ +# include + +# if (defined(__MWERKS__) && defined(macintosh)) || defined(applec) || \ + defined(THINK_C) || defined(__SC__) || defined(TARGET_OS_MAC) + /* We need to check that hasn't already been included earlier + * as it seems it doesn't agree with , yet we should really use + * if possible. + */ +# if !defined(__MATH_H__) && !defined(__MATH_H) && !defined(__cmath__) +# include +# endif +# else +# include +# endif +# if defined(_AMIGA) && defined(__SASC) && defined(_M68881) + /* Amiga SAS/C: We must include builtin FPU functions when compiling using + * MATH=68881 + */ +# include +# endif +#endif + +/* This provides the non-ANSI (far) memory allocation routines. */ +#if defined(__TURBOC__) && defined(__MSDOS__) +# include +# include +#endif + +#if defined(WIN32) || defined(_Windows) || defined(_WINDOWS) || \ + defined(_WIN32) || defined(__WIN32__) +# include /* defines _WINDOWS_ macro */ +#endif +#endif /* PNG_VERSION_INFO_ONLY */ + +/* Moved here around 1.5.0beta36 from pngconf.h */ +/* Users may want to use these so they are not private. Any library + * functions that are passed far data must be model-independent. + */ + +/* Memory model/platform independent fns */ +#ifndef PNG_ABORT +# ifdef _WINDOWS_ +# define PNG_ABORT() ExitProcess(0) +# else +# define PNG_ABORT() abort() +# endif +#endif + +/* These macros may need to be architecture dependent. */ +#define PNG_ALIGN_NONE 0 /* do not use data alignment */ +#define PNG_ALIGN_ALWAYS 1 /* assume unaligned accesses are OK */ +#ifdef offsetof +# define PNG_ALIGN_OFFSET 2 /* use offsetof to determine alignment */ +#else +# define PNG_ALIGN_OFFSET -1 /* prevent the use of this */ +#endif +#define PNG_ALIGN_SIZE 3 /* use sizeof to determine alignment */ + +#ifndef PNG_ALIGN_TYPE + /* Default to using aligned access optimizations and requiring alignment to a + * multiple of the data type size. Override in a compiler specific fashion + * if necessary by inserting tests here: + */ +# define PNG_ALIGN_TYPE PNG_ALIGN_SIZE +#endif + +#if PNG_ALIGN_TYPE == PNG_ALIGN_SIZE + /* This is used because in some compiler implementations non-aligned + * structure members are supported, so the offsetof approach below fails. + * Set PNG_ALIGN_SIZE=0 for compiler combinations where unaligned access + * is good for performance. Do not do this unless you have tested the result + * and understand it. + */ +# define png_alignof(type) (sizeof (type)) +#else +# if PNG_ALIGN_TYPE == PNG_ALIGN_OFFSET +# define png_alignof(type) offsetof(struct{char c; type t;}, t) +# else +# if PNG_ALIGN_TYPE == PNG_ALIGN_ALWAYS +# define png_alignof(type) (1) +# endif + /* Else leave png_alignof undefined to prevent use thereof */ +# endif +#endif + +/* This implicitly assumes alignment is always to a power of 2. */ +#ifdef png_alignof +# define png_isaligned(ptr, type)\ + ((((const char*)ptr-(const char*)0) & (png_alignof(type)-1)) == 0) +#else +# define png_isaligned(ptr, type) 0 +#endif + +/* End of memory model/platform independent support */ +/* End of 1.5.0beta36 move from pngconf.h */ + +/* CONSTANTS and UTILITY MACROS + * These are used internally by libpng and not exposed in the API + */ + +/* Various modes of operation. Note that after an init, mode is set to + * zero automatically when the structure is created. Three of these + * are defined in png.h because they need to be visible to applications + * that call png_set_unknown_chunk(). + */ +/* #define PNG_HAVE_IHDR 0x01 (defined in png.h) */ +/* #define PNG_HAVE_PLTE 0x02 (defined in png.h) */ +#define PNG_HAVE_IDAT 0x04 +/* #define PNG_AFTER_IDAT 0x08 (defined in png.h) */ +#define PNG_HAVE_IEND 0x10 + /* 0x20 (unused) */ + /* 0x40 (unused) */ + /* 0x80 (unused) */ +#define PNG_HAVE_CHUNK_HEADER 0x100 +#define PNG_WROTE_tIME 0x200 +#define PNG_WROTE_INFO_BEFORE_PLTE 0x400 +#define PNG_BACKGROUND_IS_GRAY 0x800 +#define PNG_HAVE_PNG_SIGNATURE 0x1000 +#define PNG_HAVE_CHUNK_AFTER_IDAT 0x2000 /* Have another chunk after IDAT */ + /* 0x4000 (unused) */ +#define PNG_IS_READ_STRUCT 0x8000 /* Else is a write struct */ + +/* Flags for the transformations the PNG library does on the image data */ +#define PNG_BGR 0x0001 +#define PNG_INTERLACE 0x0002 +#define PNG_PACK 0x0004 +#define PNG_SHIFT 0x0008 +#define PNG_SWAP_BYTES 0x0010 +#define PNG_INVERT_MONO 0x0020 +#define PNG_QUANTIZE 0x0040 +#define PNG_COMPOSE 0x0080 /* Was PNG_BACKGROUND */ +#define PNG_BACKGROUND_EXPAND 0x0100 +#define PNG_EXPAND_16 0x0200 /* Added to libpng 1.5.2 */ +#define PNG_16_TO_8 0x0400 /* Becomes 'chop' in 1.5.4 */ +#define PNG_RGBA 0x0800 +#define PNG_EXPAND 0x1000 +#define PNG_GAMMA 0x2000 +#define PNG_GRAY_TO_RGB 0x4000 +#define PNG_FILLER 0x8000 +#define PNG_PACKSWAP 0x10000 +#define PNG_SWAP_ALPHA 0x20000 +#define PNG_STRIP_ALPHA 0x40000 +#define PNG_INVERT_ALPHA 0x80000 +#define PNG_USER_TRANSFORM 0x100000 +#define PNG_RGB_TO_GRAY_ERR 0x200000 +#define PNG_RGB_TO_GRAY_WARN 0x400000 +#define PNG_RGB_TO_GRAY 0x600000 /* two bits, RGB_TO_GRAY_ERR|WARN */ +#define PNG_ENCODE_ALPHA 0x800000 /* Added to libpng-1.5.4 */ +#define PNG_ADD_ALPHA 0x1000000 /* Added to libpng-1.2.7 */ +#define PNG_EXPAND_tRNS 0x2000000 /* Added to libpng-1.2.9 */ +#define PNG_SCALE_16_TO_8 0x4000000 /* Added to libpng-1.5.4 */ + /* 0x8000000 unused */ + /* 0x10000000 unused */ + /* 0x20000000 unused */ + /* 0x40000000 unused */ +/* Flags for png_create_struct */ +#define PNG_STRUCT_PNG 0x0001 +#define PNG_STRUCT_INFO 0x0002 + +/* Scaling factor for filter heuristic weighting calculations */ +#define PNG_WEIGHT_FACTOR (1<<(PNG_WEIGHT_SHIFT)) +#define PNG_COST_FACTOR (1<<(PNG_COST_SHIFT)) + +/* Flags for the png_ptr->flags rather than declaring a byte for each one */ +#define PNG_FLAG_ZLIB_CUSTOM_STRATEGY 0x0001 +#define PNG_FLAG_ZSTREAM_INITIALIZED 0x0002 /* Added to libpng-1.6.0 */ + /* 0x0004 unused */ +#define PNG_FLAG_ZSTREAM_ENDED 0x0008 /* Added to libpng-1.6.0 */ + /* 0x0010 unused */ + /* 0x0020 unused */ +#define PNG_FLAG_ROW_INIT 0x0040 +#define PNG_FLAG_FILLER_AFTER 0x0080 +#define PNG_FLAG_CRC_ANCILLARY_USE 0x0100 +#define PNG_FLAG_CRC_ANCILLARY_NOWARN 0x0200 +#define PNG_FLAG_CRC_CRITICAL_USE 0x0400 +#define PNG_FLAG_CRC_CRITICAL_IGNORE 0x0800 +#define PNG_FLAG_ASSUME_sRGB 0x1000 /* Added to libpng-1.5.4 */ +#define PNG_FLAG_OPTIMIZE_ALPHA 0x2000 /* Added to libpng-1.5.4 */ +#define PNG_FLAG_DETECT_UNINITIALIZED 0x4000 /* Added to libpng-1.5.4 */ +/* #define PNG_FLAG_KEEP_UNKNOWN_CHUNKS 0x8000 */ +/* #define PNG_FLAG_KEEP_UNSAFE_CHUNKS 0x10000 */ +#define PNG_FLAG_LIBRARY_MISMATCH 0x20000 +#define PNG_FLAG_STRIP_ERROR_NUMBERS 0x40000 +#define PNG_FLAG_STRIP_ERROR_TEXT 0x80000 +#define PNG_FLAG_BENIGN_ERRORS_WARN 0x100000 /* Added to libpng-1.4.0 */ +#define PNG_FLAG_APP_WARNINGS_WARN 0x200000 /* Added to libpng-1.6.0 */ +#define PNG_FLAG_APP_ERRORS_WARN 0x400000 /* Added to libpng-1.6.0 */ + /* 0x800000 unused */ + /* 0x1000000 unused */ + /* 0x2000000 unused */ + /* 0x4000000 unused */ + /* 0x8000000 unused */ + /* 0x10000000 unused */ + /* 0x20000000 unused */ + /* 0x40000000 unused */ + +#define PNG_FLAG_CRC_ANCILLARY_MASK (PNG_FLAG_CRC_ANCILLARY_USE | \ + PNG_FLAG_CRC_ANCILLARY_NOWARN) + +#define PNG_FLAG_CRC_CRITICAL_MASK (PNG_FLAG_CRC_CRITICAL_USE | \ + PNG_FLAG_CRC_CRITICAL_IGNORE) + +#define PNG_FLAG_CRC_MASK (PNG_FLAG_CRC_ANCILLARY_MASK | \ + PNG_FLAG_CRC_CRITICAL_MASK) + +/* Save typing and make code easier to understand */ + +#define PNG_COLOR_DIST(c1, c2) (abs((int)((c1).red) - (int)((c2).red)) + \ + abs((int)((c1).green) - (int)((c2).green)) + \ + abs((int)((c1).blue) - (int)((c2).blue))) + +/* Added to libpng-1.6.0: scale a 16-bit value in the range 0..65535 to 0..255 + * by dividing by 257 *with rounding*. This macro is exact for the given range. + * See the discourse in pngrtran.c png_do_scale_16_to_8. The values in the + * macro were established by experiment (modifying the added value). The macro + * has a second variant that takes a value already scaled by 255 and divides by + * 65535 - this has a maximum error of .502. Over the range 0..65535*65535 it + * only gives off-by-one errors and only for 0.5% (1 in 200) of the values. + */ +#define PNG_DIV65535(v24) (((v24) + 32895) >> 16) +#define PNG_DIV257(v16) PNG_DIV65535((png_uint_32)(v16) * 255) + +/* Added to libpng-1.2.6 JB */ +#define PNG_ROWBYTES(pixel_bits, width) \ + ((pixel_bits) >= 8 ? \ + ((png_size_t)(width) * (((png_size_t)(pixel_bits)) >> 3)) : \ + (( ((png_size_t)(width) * ((png_size_t)(pixel_bits))) + 7) >> 3) ) + +/* PNG_OUT_OF_RANGE returns true if value is outside the range + * ideal-delta..ideal+delta. Each argument is evaluated twice. + * "ideal" and "delta" should be constants, normally simple + * integers, "value" a variable. Added to libpng-1.2.6 JB + */ +#define PNG_OUT_OF_RANGE(value, ideal, delta) \ + ( (value) < (ideal)-(delta) || (value) > (ideal)+(delta) ) + +/* Conversions between fixed and floating point, only defined if + * required (to make sure the code doesn't accidentally use float + * when it is supposedly disabled.) + */ +#ifdef PNG_FLOATING_POINT_SUPPORTED +/* The floating point conversion can't overflow, though it can and + * does lose accuracy relative to the original fixed point value. + * In practice this doesn't matter because png_fixed_point only + * stores numbers with very low precision. The png_ptr and s + * arguments are unused by default but are there in case error + * checking becomes a requirement. + */ +#define png_float(png_ptr, fixed, s) (.00001 * (fixed)) + +/* The fixed point conversion performs range checking and evaluates + * its argument multiple times, so must be used with care. The + * range checking uses the PNG specification values for a signed + * 32 bit fixed point value except that the values are deliberately + * rounded-to-zero to an integral value - 21474 (21474.83 is roughly + * (2^31-1) * 100000). 's' is a string that describes the value being + * converted. + * + * NOTE: this macro will raise a png_error if the range check fails, + * therefore it is normally only appropriate to use this on values + * that come from API calls or other sources where an out of range + * error indicates a programming error, not a data error! + * + * NOTE: by default this is off - the macro is not used - because the + * function call saves a lot of code. + */ +#ifdef PNG_FIXED_POINT_MACRO_SUPPORTED +#define png_fixed(png_ptr, fp, s) ((fp) <= 21474 && (fp) >= -21474 ?\ + ((png_fixed_point)(100000 * (fp))) : (png_fixed_error(png_ptr, s),0)) +#endif +/* else the corresponding function is defined below, inside the scope of the + * cplusplus test. + */ +#endif + +/* Constants for known chunk types. If you need to add a chunk, define the name + * here. For historical reasons these constants have the form png_; i.e. + * the prefix is lower case. Please use decimal values as the parameters to + * match the ISO PNG specification and to avoid relying on the C locale + * interpretation of character values. + * + * Prior to 1.5.6 these constants were strings, as of 1.5.6 png_uint_32 values + * are computed and a new macro (PNG_STRING_FROM_CHUNK) added to allow a string + * to be generated if required. + * + * PNG_32b correctly produces a value shifted by up to 24 bits, even on + * architectures where (int) is only 16 bits. + */ +#define PNG_32b(b,s) ((png_uint_32)(b) << (s)) +#define PNG_CHUNK(b1,b2,b3,b4) \ + (PNG_32b(b1,24) | PNG_32b(b2,16) | PNG_32b(b3,8) | PNG_32b(b4,0)) + +#define png_IHDR PNG_CHUNK( 73, 72, 68, 82) +#define png_IDAT PNG_CHUNK( 73, 68, 65, 84) +#define png_IEND PNG_CHUNK( 73, 69, 78, 68) +#define png_PLTE PNG_CHUNK( 80, 76, 84, 69) +#define png_bKGD PNG_CHUNK( 98, 75, 71, 68) +#define png_cHRM PNG_CHUNK( 99, 72, 82, 77) +#define png_gAMA PNG_CHUNK(103, 65, 77, 65) +#define png_hIST PNG_CHUNK(104, 73, 83, 84) +#define png_iCCP PNG_CHUNK(105, 67, 67, 80) +#define png_iTXt PNG_CHUNK(105, 84, 88, 116) +#define png_oFFs PNG_CHUNK(111, 70, 70, 115) +#define png_pCAL PNG_CHUNK(112, 67, 65, 76) +#define png_sCAL PNG_CHUNK(115, 67, 65, 76) +#define png_pHYs PNG_CHUNK(112, 72, 89, 115) +#define png_sBIT PNG_CHUNK(115, 66, 73, 84) +#define png_sPLT PNG_CHUNK(115, 80, 76, 84) +#define png_sRGB PNG_CHUNK(115, 82, 71, 66) +#define png_sTER PNG_CHUNK(115, 84, 69, 82) +#define png_tEXt PNG_CHUNK(116, 69, 88, 116) +#define png_tIME PNG_CHUNK(116, 73, 77, 69) +#define png_tRNS PNG_CHUNK(116, 82, 78, 83) +#define png_zTXt PNG_CHUNK(122, 84, 88, 116) + +/* The following will work on (signed char*) strings, whereas the get_uint_32 + * macro will fail on top-bit-set values because of the sign extension. + */ +#define PNG_CHUNK_FROM_STRING(s)\ + PNG_CHUNK(0xff&(s)[0], 0xff&(s)[1], 0xff&(s)[2], 0xff&(s)[3]) + +/* This uses (char), not (png_byte) to avoid warnings on systems where (char) is + * signed and the argument is a (char[]) This macro will fail miserably on + * systems where (char) is more than 8 bits. + */ +#define PNG_STRING_FROM_CHUNK(s,c)\ + (void)(((char*)(s))[0]=(char)((c)>>24), ((char*)(s))[1]=(char)((c)>>16),\ + ((char*)(s))[2]=(char)((c)>>8), ((char*)(s))[3]=(char)((c))) + +/* Do the same but terminate with a null character. */ +#define PNG_CSTRING_FROM_CHUNK(s,c)\ + (void)(PNG_STRING_FROM_CHUNK(s,c), ((char*)(s))[4] = 0) + +/* Test on flag values as defined in the spec (section 5.4): */ +#define PNG_CHUNK_ANCILLARY(c) (1 & ((c) >> 29)) +#define PNG_CHUNK_CRITICAL(c) (!PNG_CHUNK_ANCILLARY(c)) +#define PNG_CHUNK_PRIVATE(c) (1 & ((c) >> 21)) +#define PNG_CHUNK_RESERVED(c) (1 & ((c) >> 13)) +#define PNG_CHUNK_SAFE_TO_COPY(c) (1 & ((c) >> 5)) + +/* Gamma values (new at libpng-1.5.4): */ +#define PNG_GAMMA_MAC_OLD 151724 /* Assume '1.8' is really 2.2/1.45! */ +#define PNG_GAMMA_MAC_INVERSE 65909 +#define PNG_GAMMA_sRGB_INVERSE 45455 + +/* Almost everything below is C specific; the #defines above can be used in + * non-C code (so long as it is C-preprocessed) the rest of this stuff cannot. + */ +#ifndef PNG_VERSION_INFO_ONLY + +#include "pngstruct.h" +#include "pnginfo.h" + +/* This is used for 16 bit gamma tables -- only the top level pointers are + * const; this could be changed: + */ +typedef const png_uint_16p * png_const_uint_16pp; + +/* Added to libpng-1.5.7: sRGB conversion tables */ +#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) ||\ + defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED +PNG_INTERNAL_DATA(const png_uint_16, png_sRGB_table, [256]); + /* Convert from an sRGB encoded value 0..255 to a 16-bit linear value, + * 0..65535. This table gives the closest 16-bit answers (no errors). + */ +#endif + +PNG_INTERNAL_DATA(const png_uint_16, png_sRGB_base, [512]); +PNG_INTERNAL_DATA(const png_byte, png_sRGB_delta, [512]); + +#define PNG_sRGB_FROM_LINEAR(linear) ((png_byte)((png_sRGB_base[(linear)>>15] +\ + ((((linear)&0x7fff)*png_sRGB_delta[(linear)>>15])>>12)) >> 8)) + /* Given a value 'linear' in the range 0..255*65535 calculate the 8-bit sRGB + * encoded value with maximum error 0.646365. Note that the input is not a + * 16-bit value; it has been multiplied by 255! */ +#endif /* PNG_SIMPLIFIED_READ/WRITE */ + + +/* Inhibit C++ name-mangling for libpng functions but not for system calls. */ +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Internal functions; these are not exported from a DLL however because they + * are used within several of the C source files they have to be C extern. + * + * All of these functions must be declared with PNG_INTERNAL_FUNCTION. + */ + +/* Zlib support */ +#define PNG_UNEXPECTED_ZLIB_RETURN (-7) +PNG_INTERNAL_FUNCTION(void, png_zstream_error,(png_structrp png_ptr, int ret), + PNG_EMPTY); + /* Used by the zlib handling functions to ensure that z_stream::msg is always + * set before they return. + */ + +#ifdef PNG_WRITE_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_free_buffer_list,(png_structrp png_ptr, + png_compression_bufferp *list),PNG_EMPTY); + /* Free the buffer list used by the compressed write code. */ +#endif + +#if defined(PNG_FLOATING_POINT_SUPPORTED) && \ + !defined(PNG_FIXED_POINT_MACRO_SUPPORTED) && \ + (defined(PNG_gAMA_SUPPORTED) || defined(PNG_cHRM_SUPPORTED) || \ + defined(PNG_sCAL_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) || \ + defined(PNG_READ_RGB_TO_GRAY_SUPPORTED)) || \ + (defined(PNG_sCAL_SUPPORTED) && \ + defined(PNG_FLOATING_ARITHMETIC_SUPPORTED)) +PNG_INTERNAL_FUNCTION(png_fixed_point,png_fixed,(png_const_structrp png_ptr, + double fp, png_const_charp text),PNG_EMPTY); +#endif + +/* Check the user version string for compatibility, returns false if the version + * numbers aren't compatible. + */ +PNG_INTERNAL_FUNCTION(int,png_user_version_check,(png_structrp png_ptr, + png_const_charp user_png_ver),PNG_EMPTY); + +/* Internal base allocator - no messages, NULL on failure to allocate. This + * does, however, call the application provided allocator and that could call + * png_error (although that would be a bug in the application implementation.) + */ +PNG_INTERNAL_FUNCTION(png_voidp,png_malloc_base,(png_const_structrp png_ptr, + png_alloc_size_t size),PNG_ALLOCATED); + +#if defined(PNG_TEXT_SUPPORTED) || defined(PNG_sPLT_SUPPORTED) ||\ + defined(PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED) +/* Internal array allocator, outputs no error or warning messages on failure, + * just returns NULL. + */ +PNG_INTERNAL_FUNCTION(png_voidp,png_malloc_array,(png_const_structrp png_ptr, + int nelements, size_t element_size),PNG_ALLOCATED); + +/* The same but an existing array is extended by add_elements. This function + * also memsets the new elements to 0 and copies the old elements. The old + * array is not freed or altered. + */ +PNG_INTERNAL_FUNCTION(png_voidp,png_realloc_array,(png_const_structrp png_ptr, + png_const_voidp array, int old_elements, int add_elements, + size_t element_size),PNG_ALLOCATED); +#endif /* text, sPLT or unknown chunks */ + +/* Magic to create a struct when there is no struct to call the user supplied + * memory allocators. Because error handling has not been set up the memory + * handlers can't safely call png_error, but this is an obscure and undocumented + * restriction so libpng has to assume that the 'free' handler, at least, might + * call png_error. + */ +PNG_INTERNAL_FUNCTION(png_structp,png_create_png_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, png_voidp mem_ptr, png_malloc_ptr malloc_fn, + png_free_ptr free_fn),PNG_ALLOCATED); + +/* Free memory from internal libpng struct */ +PNG_INTERNAL_FUNCTION(void,png_destroy_png_struct,(png_structrp png_ptr), + PNG_EMPTY); + +/* Free an allocated jmp_buf (always succeeds) */ +PNG_INTERNAL_FUNCTION(void,png_free_jmpbuf,(png_structrp png_ptr),PNG_EMPTY); + +/* Function to allocate memory for zlib. PNGAPI is disallowed. */ +PNG_INTERNAL_FUNCTION(voidpf,png_zalloc,(voidpf png_ptr, uInt items, uInt size), + PNG_ALLOCATED); + +/* Function to free memory for zlib. PNGAPI is disallowed. */ +PNG_INTERNAL_FUNCTION(void,png_zfree,(voidpf png_ptr, voidpf ptr),PNG_EMPTY); + +/* Next four functions are used internally as callbacks. PNGCBAPI is required + * but not PNG_EXPORT. PNGAPI added at libpng version 1.2.3, changed to + * PNGCBAPI at 1.5.0 + */ + +PNG_INTERNAL_FUNCTION(void PNGCBAPI,png_default_read_data,(png_structp png_ptr, + png_bytep data, png_size_t length),PNG_EMPTY); + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +PNG_INTERNAL_FUNCTION(void PNGCBAPI,png_push_fill_buffer,(png_structp png_ptr, + png_bytep buffer, png_size_t length),PNG_EMPTY); +#endif + +PNG_INTERNAL_FUNCTION(void PNGCBAPI,png_default_write_data,(png_structp png_ptr, + png_bytep data, png_size_t length),PNG_EMPTY); + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +# ifdef PNG_STDIO_SUPPORTED +PNG_INTERNAL_FUNCTION(void PNGCBAPI,png_default_flush,(png_structp png_ptr), + PNG_EMPTY); +# endif +#endif + +/* Reset the CRC variable */ +PNG_INTERNAL_FUNCTION(void,png_reset_crc,(png_structrp png_ptr),PNG_EMPTY); + +/* Write the "data" buffer to whatever output you are using */ +PNG_INTERNAL_FUNCTION(void,png_write_data,(png_structrp png_ptr, + png_const_bytep data, png_size_t length),PNG_EMPTY); + +/* Read and check the PNG file signature */ +PNG_INTERNAL_FUNCTION(void,png_read_sig,(png_structrp png_ptr, + png_inforp info_ptr),PNG_EMPTY); + +/* Read the chunk header (length + type name) */ +PNG_INTERNAL_FUNCTION(png_uint_32,png_read_chunk_header,(png_structrp png_ptr), + PNG_EMPTY); + +/* Read data from whatever input you are using into the "data" buffer */ +PNG_INTERNAL_FUNCTION(void,png_read_data,(png_structrp png_ptr, png_bytep data, + png_size_t length),PNG_EMPTY); + +/* Read bytes into buf, and update png_ptr->crc */ +PNG_INTERNAL_FUNCTION(void,png_crc_read,(png_structrp png_ptr, png_bytep buf, + png_uint_32 length),PNG_EMPTY); + +/* Read "skip" bytes, read the file crc, and (optionally) verify png_ptr->crc */ +PNG_INTERNAL_FUNCTION(int,png_crc_finish,(png_structrp png_ptr, + png_uint_32 skip),PNG_EMPTY); + +/* Read the CRC from the file and compare it to the libpng calculated CRC */ +PNG_INTERNAL_FUNCTION(int,png_crc_error,(png_structrp png_ptr),PNG_EMPTY); + +/* Calculate the CRC over a section of data. Note that we are only + * passing a maximum of 64K on systems that have this as a memory limit, + * since this is the maximum buffer size we can specify. + */ +PNG_INTERNAL_FUNCTION(void,png_calculate_crc,(png_structrp png_ptr, + png_const_bytep ptr, png_size_t length),PNG_EMPTY); + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_flush,(png_structrp png_ptr),PNG_EMPTY); +#endif + +/* Write various chunks */ + +/* Write the IHDR chunk, and update the png_struct with the necessary + * information. + */ +PNG_INTERNAL_FUNCTION(void,png_write_IHDR,(png_structrp png_ptr, + png_uint_32 width, png_uint_32 height, int bit_depth, int color_type, + int compression_method, int filter_method, int interlace_method),PNG_EMPTY); + +PNG_INTERNAL_FUNCTION(void,png_write_PLTE,(png_structrp png_ptr, + png_const_colorp palette, png_uint_32 num_pal),PNG_EMPTY); + +PNG_INTERNAL_FUNCTION(void,png_compress_IDAT,(png_structrp png_ptr, + png_const_bytep row_data, png_alloc_size_t row_data_length, int flush), + PNG_EMPTY); + +PNG_INTERNAL_FUNCTION(void,png_write_IEND,(png_structrp png_ptr),PNG_EMPTY); + +#ifdef PNG_WRITE_gAMA_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_gAMA_fixed,(png_structrp png_ptr, + png_fixed_point file_gamma),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_sBIT_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_sBIT,(png_structrp png_ptr, + png_const_color_8p sbit, int color_type),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_cHRM_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_cHRM_fixed,(png_structrp png_ptr, + const png_xy *xy), PNG_EMPTY); + /* The xy value must have been previously validated */ +#endif + +#ifdef PNG_WRITE_sRGB_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_sRGB,(png_structrp png_ptr, + int intent),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_iCCP_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_iCCP,(png_structrp png_ptr, + png_const_charp name, png_const_bytep profile), PNG_EMPTY); + /* The profile must have been previously validated for correctness, the + * length comes from the first four bytes. Only the base, deflate, + * compression is supported. + */ +#endif + +#ifdef PNG_WRITE_sPLT_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_sPLT,(png_structrp png_ptr, + png_const_sPLT_tp palette),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_tRNS_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_tRNS,(png_structrp png_ptr, + png_const_bytep trans, png_const_color_16p values, int number, + int color_type),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_bKGD_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_bKGD,(png_structrp png_ptr, + png_const_color_16p values, int color_type),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_hIST_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_hIST,(png_structrp png_ptr, + png_const_uint_16p hist, int num_hist),PNG_EMPTY); +#endif + +/* Chunks that have keywords */ +#ifdef PNG_WRITE_tEXt_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_tEXt,(png_structrp png_ptr, + png_const_charp key, png_const_charp text, png_size_t text_len),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_zTXt_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_zTXt,(png_structrp png_ptr, png_const_charp + key, png_const_charp text, png_size_t text_len, int compression),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_iTXt_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_iTXt,(png_structrp png_ptr, + int compression, png_const_charp key, png_const_charp lang, + png_const_charp lang_key, png_const_charp text),PNG_EMPTY); +#endif + +#ifdef PNG_TEXT_SUPPORTED /* Added at version 1.0.14 and 1.2.4 */ +PNG_INTERNAL_FUNCTION(int,png_set_text_2,(png_const_structrp png_ptr, + png_inforp info_ptr, png_const_textp text_ptr, int num_text),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_oFFs_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_oFFs,(png_structrp png_ptr, + png_int_32 x_offset, png_int_32 y_offset, int unit_type),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_pCAL_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_pCAL,(png_structrp png_ptr, + png_charp purpose, png_int_32 X0, png_int_32 X1, int type, int nparams, + png_const_charp units, png_charpp params),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_pHYs_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_pHYs,(png_structrp png_ptr, + png_uint_32 x_pixels_per_unit, png_uint_32 y_pixels_per_unit, + int unit_type),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_tIME_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_tIME,(png_structrp png_ptr, + png_const_timep mod_time),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_sCAL_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_write_sCAL_s,(png_structrp png_ptr, + int unit, png_const_charp width, png_const_charp height),PNG_EMPTY); +#endif + +/* Called when finished processing a row of data */ +PNG_INTERNAL_FUNCTION(void,png_write_finish_row,(png_structrp png_ptr), + PNG_EMPTY); + +/* Internal use only. Called before first row of data */ +PNG_INTERNAL_FUNCTION(void,png_write_start_row,(png_structrp png_ptr), + PNG_EMPTY); + +/* Combine a row of data, dealing with alpha, etc. if requested. 'row' is an + * array of png_ptr->width pixels. If the image is not interlaced or this + * is the final pass this just does a memcpy, otherwise the "display" flag + * is used to determine whether to copy pixels that are not in the current pass. + * + * Because 'png_do_read_interlace' (below) replicates pixels this allows this + * function to achieve the documented 'blocky' appearance during interlaced read + * if display is 1 and the 'sparkle' appearance, where existing pixels in 'row' + * are not changed if they are not in the current pass, when display is 0. + * + * 'display' must be 0 or 1, otherwise the memcpy will be done regardless. + * + * The API always reads from the png_struct row buffer and always assumes that + * it is full width (png_do_read_interlace has already been called.) + * + * This function is only ever used to write to row buffers provided by the + * caller of the relevant libpng API and the row must have already been + * transformed by the read transformations. + * + * The PNG_USE_COMPILE_TIME_MASKS option causes generation of pre-computed + * bitmasks for use within the code, otherwise runtime generated masks are used. + * The default is compile time masks. + */ +#ifndef PNG_USE_COMPILE_TIME_MASKS +# define PNG_USE_COMPILE_TIME_MASKS 1 +#endif +PNG_INTERNAL_FUNCTION(void,png_combine_row,(png_const_structrp png_ptr, + png_bytep row, int display),PNG_EMPTY); + +#ifdef PNG_READ_INTERLACING_SUPPORTED +/* Expand an interlaced row: the 'row_info' describes the pass data that has + * been read in and must correspond to the pixels in 'row', the pixels are + * expanded (moved apart) in 'row' to match the final layout, when doing this + * the pixels are *replicated* to the intervening space. This is essential for + * the correct operation of png_combine_row, above. + */ +PNG_INTERNAL_FUNCTION(void,png_do_read_interlace,(png_row_infop row_info, + png_bytep row, int pass, png_uint_32 transformations),PNG_EMPTY); +#endif + +/* GRR TO DO (2.0 or whenever): simplify other internal calling interfaces */ + +#ifdef PNG_WRITE_INTERLACING_SUPPORTED +/* Grab pixels out of a row for an interlaced pass */ +PNG_INTERNAL_FUNCTION(void,png_do_write_interlace,(png_row_infop row_info, + png_bytep row, int pass),PNG_EMPTY); +#endif + +/* Unfilter a row: check the filter value before calling this, there is no point + * calling it for PNG_FILTER_VALUE_NONE. + */ +PNG_INTERNAL_FUNCTION(void,png_read_filter_row,(png_structrp pp, png_row_infop + row_info, png_bytep row, png_const_bytep prev_row, int filter),PNG_EMPTY); + +PNG_INTERNAL_FUNCTION(void,png_read_filter_row_up_neon,(png_row_infop row_info, + png_bytep row, png_const_bytep prev_row),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_read_filter_row_sub3_neon,(png_row_infop + row_info, png_bytep row, png_const_bytep prev_row),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_read_filter_row_sub4_neon,(png_row_infop + row_info, png_bytep row, png_const_bytep prev_row),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_read_filter_row_avg3_neon,(png_row_infop + row_info, png_bytep row, png_const_bytep prev_row),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_read_filter_row_avg4_neon,(png_row_infop + row_info, png_bytep row, png_const_bytep prev_row),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_read_filter_row_paeth3_neon,(png_row_infop + row_info, png_bytep row, png_const_bytep prev_row),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_read_filter_row_paeth4_neon,(png_row_infop + row_info, png_bytep row, png_const_bytep prev_row),PNG_EMPTY); + +/* Choose the best filter to use and filter the row data */ +PNG_INTERNAL_FUNCTION(void,png_write_find_filter,(png_structrp png_ptr, + png_row_infop row_info),PNG_EMPTY); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_read_IDAT_data,(png_structrp png_ptr, + png_bytep output, png_alloc_size_t avail_out),PNG_EMPTY); + /* Read 'avail_out' bytes of data from the IDAT stream. If the output buffer + * is NULL the function checks, instead, for the end of the stream. In this + * case a benign error will be issued if the stream end is not found or if + * extra data has to be consumed. + */ +PNG_INTERNAL_FUNCTION(void,png_read_finish_IDAT,(png_structrp png_ptr), + PNG_EMPTY); + /* This cleans up when the IDAT LZ stream does not end when the last image + * byte is read; there is still some pending input. + */ + +PNG_INTERNAL_FUNCTION(void,png_read_finish_row,(png_structrp png_ptr), + PNG_EMPTY); + /* Finish a row while reading, dealing with interlacing passes, etc. */ +#endif + +/* Initialize the row buffers, etc. */ +PNG_INTERNAL_FUNCTION(void,png_read_start_row,(png_structrp png_ptr),PNG_EMPTY); + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +/* Optional call to update the users info structure */ +PNG_INTERNAL_FUNCTION(void,png_read_transform_info,(png_structrp png_ptr, + png_inforp info_ptr),PNG_EMPTY); +#endif + +/* These are the functions that do the transformations */ +#ifdef PNG_READ_FILLER_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_read_filler,(png_row_infop row_info, + png_bytep row, png_uint_32 filler, png_uint_32 flags),PNG_EMPTY); +#endif + +#ifdef PNG_READ_SWAP_ALPHA_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_read_swap_alpha,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_SWAP_ALPHA_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_write_swap_alpha,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +#ifdef PNG_READ_INVERT_ALPHA_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_read_invert_alpha,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_INVERT_ALPHA_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_write_invert_alpha,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +#if defined(PNG_WRITE_FILLER_SUPPORTED) || \ + defined(PNG_READ_STRIP_ALPHA_SUPPORTED) +PNG_INTERNAL_FUNCTION(void,png_do_strip_channel,(png_row_infop row_info, + png_bytep row, int at_start),PNG_EMPTY); +#endif + +#ifdef PNG_16BIT_SUPPORTED +#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) +PNG_INTERNAL_FUNCTION(void,png_do_swap,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif +#endif + +#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \ + defined(PNG_WRITE_PACKSWAP_SUPPORTED) +PNG_INTERNAL_FUNCTION(void,png_do_packswap,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +PNG_INTERNAL_FUNCTION(int,png_do_rgb_to_gray,(png_structrp png_ptr, + png_row_infop row_info, png_bytep row),PNG_EMPTY); +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_gray_to_rgb,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +#ifdef PNG_READ_PACK_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_unpack,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +#ifdef PNG_READ_SHIFT_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_unshift,(png_row_infop row_info, + png_bytep row, png_const_color_8p sig_bits),PNG_EMPTY); +#endif + +#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) +PNG_INTERNAL_FUNCTION(void,png_do_invert,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_scale_16_to_8,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_chop,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_quantize,(png_row_infop row_info, + png_bytep row, png_const_bytep palette_lookup, + png_const_bytep quantize_lookup),PNG_EMPTY); + +# ifdef PNG_CORRECT_PALETTE_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_correct_palette,(png_structrp png_ptr, + png_colorp palette, int num_palette),PNG_EMPTY); +# endif +#endif + +#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) +PNG_INTERNAL_FUNCTION(void,png_do_bgr,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_PACK_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_pack,(png_row_infop row_info, + png_bytep row, png_uint_32 bit_depth),PNG_EMPTY); +#endif + +#ifdef PNG_WRITE_SHIFT_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_shift,(png_row_infop row_info, + png_bytep row, png_const_color_8p bit_depth),PNG_EMPTY); +#endif + +#if defined(PNG_READ_BACKGROUND_SUPPORTED) ||\ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) +PNG_INTERNAL_FUNCTION(void,png_do_compose,(png_row_infop row_info, + png_bytep row, png_structrp png_ptr),PNG_EMPTY); +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_gamma,(png_row_infop row_info, + png_bytep row, png_structrp png_ptr),PNG_EMPTY); +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_encode_alpha,(png_row_infop row_info, + png_bytep row, png_structrp png_ptr),PNG_EMPTY); +#endif + +#ifdef PNG_READ_EXPAND_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_expand_palette,(png_row_infop row_info, + png_bytep row, png_const_colorp palette, png_const_bytep trans, + int num_trans),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_do_expand,(png_row_infop row_info, + png_bytep row, png_const_color_16p trans_color),PNG_EMPTY); +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_expand_16,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +/* The following decodes the appropriate chunks, and does error correction, + * then calls the appropriate callback for the chunk if it is valid. + */ + +/* Decode the IHDR chunk */ +PNG_INTERNAL_FUNCTION(void,png_handle_IHDR,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_handle_PLTE,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_handle_IEND,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); + +#ifdef PNG_READ_bKGD_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_bKGD,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_cHRM_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_cHRM,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_gAMA_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_gAMA,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_hIST_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_hIST,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_iCCP_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_iCCP,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif /* PNG_READ_iCCP_SUPPORTED */ + +#ifdef PNG_READ_iTXt_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_iTXt,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_oFFs_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_oFFs,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_pCAL_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_pCAL,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_pHYs_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_pHYs,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_sBIT_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_sBIT,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_sCAL_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_sCAL,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_sPLT_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_sPLT,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif /* PNG_READ_sPLT_SUPPORTED */ + +#ifdef PNG_READ_sRGB_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_sRGB,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_tEXt_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_tEXt,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_tIME_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_tIME,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_tRNS_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_tRNS,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +#ifdef PNG_READ_zTXt_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_zTXt,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +#endif + +PNG_INTERNAL_FUNCTION(void,png_check_chunk_name,(png_structrp png_ptr, + png_uint_32 chunk_name),PNG_EMPTY); + +#ifdef PNG_READ_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_handle_unknown,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length, int keep),PNG_EMPTY); + /* This is the function that gets called for unknown chunks. The 'keep' + * argument is either non-zero for a known chunk that has been set to be + * handled as unknown or zero for an unknown chunk. By default the function + * just skips the chunk or errors out if it is critical. + */ + +#ifdef PNG_READ_UNKNOWN_CHUNKS_SUPPORTED +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +PNG_INTERNAL_FUNCTION(int,png_chunk_unknown_handling, + (png_const_structrp png_ptr, png_uint_32 chunk_name),PNG_EMPTY); + /* Exactly as the API png_handle_as_unknown() except that the argument is a + * 32-bit chunk name, not a string. + */ +#endif +#endif /* PNG_READ_UNKNOWN_CHUNKS_SUPPORTED */ +#endif /* PNG_READ_SUPPORTED */ + +/* Handle the transformations for reading and writing */ +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_read_transformations,(png_structrp png_ptr, + png_row_infop row_info),PNG_EMPTY); +#endif +#ifdef PNG_WRITE_TRANSFORMS_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_write_transformations,(png_structrp png_ptr, + png_row_infop row_info),PNG_EMPTY); +#endif + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_init_read_transformations,(png_structrp png_ptr), + PNG_EMPTY); +#endif + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_push_read_chunk,(png_structrp png_ptr, + png_inforp info_ptr),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_read_sig,(png_structrp png_ptr, + png_inforp info_ptr),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_check_crc,(png_structrp png_ptr),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_crc_skip,(png_structrp png_ptr, + png_uint_32 length),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_crc_finish,(png_structrp png_ptr), + PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_save_buffer,(png_structrp png_ptr), + PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_restore_buffer,(png_structrp png_ptr, + png_bytep buffer, png_size_t buffer_length),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_read_IDAT,(png_structrp png_ptr),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_process_IDAT_data,(png_structrp png_ptr, + png_bytep buffer, png_size_t buffer_length),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_process_row,(png_structrp png_ptr), + PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_handle_unknown,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_have_info,(png_structrp png_ptr, + png_inforp info_ptr),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_have_end,(png_structrp png_ptr, + png_inforp info_ptr),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_have_row,(png_structrp png_ptr, + png_bytep row),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_read_end,(png_structrp png_ptr, + png_inforp info_ptr),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_process_some_data,(png_structrp png_ptr, + png_inforp info_ptr),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_read_push_finish_row,(png_structrp png_ptr), + PNG_EMPTY); +# ifdef PNG_READ_tEXt_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_push_handle_tEXt,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_read_tEXt,(png_structrp png_ptr, + png_inforp info_ptr),PNG_EMPTY); +# endif +# ifdef PNG_READ_zTXt_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_push_handle_zTXt,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_read_zTXt,(png_structrp png_ptr, + png_inforp info_ptr),PNG_EMPTY); +# endif +# ifdef PNG_READ_iTXt_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_push_handle_iTXt,(png_structrp png_ptr, + png_inforp info_ptr, png_uint_32 length),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_push_read_iTXt,(png_structrp png_ptr, + png_inforp info_ptr),PNG_EMPTY); +# endif + +#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */ + +#ifdef PNG_MNG_FEATURES_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_do_read_intrapixel,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_do_write_intrapixel,(png_row_infop row_info, + png_bytep row),PNG_EMPTY); +#endif + +/* Added at libpng version 1.6.0 */ +#ifdef PNG_GAMMA_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_colorspace_set_gamma,(png_const_structrp png_ptr, + png_colorspacerp colorspace, png_fixed_point gAMA), PNG_EMPTY); + /* Set the colorspace gamma with a value provided by the application or by + * the gAMA chunk on read. The value will override anything set by an ICC + * profile. + */ + +PNG_INTERNAL_FUNCTION(void,png_colorspace_sync_info,(png_const_structrp png_ptr, + png_inforp info_ptr), PNG_EMPTY); + /* Synchronize the info 'valid' flags with the colorspace */ + +PNG_INTERNAL_FUNCTION(void,png_colorspace_sync,(png_const_structrp png_ptr, + png_inforp info_ptr), PNG_EMPTY); + /* Copy the png_struct colorspace to the info_struct and call the above to + * synchronize the flags. Checks for NULL info_ptr and does nothing. + */ +#endif + +/* Added at libpng version 1.4.0 */ +#ifdef PNG_COLORSPACE_SUPPORTED +/* These internal functions are for maintaining the colorspace structure within + * a png_info or png_struct (or, indeed, both). + */ +PNG_INTERNAL_FUNCTION(int,png_colorspace_set_chromaticities, + (png_const_structrp png_ptr, png_colorspacerp colorspace, const png_xy *xy, + int preferred), PNG_EMPTY); + +PNG_INTERNAL_FUNCTION(int,png_colorspace_set_endpoints, + (png_const_structrp png_ptr, png_colorspacerp colorspace, const png_XYZ *XYZ, + int preferred), PNG_EMPTY); + +#ifdef PNG_sRGB_SUPPORTED +PNG_INTERNAL_FUNCTION(int,png_colorspace_set_sRGB,(png_const_structrp png_ptr, + png_colorspacerp colorspace, int intent), PNG_EMPTY); + /* This does set the colorspace gAMA and cHRM values too, but doesn't set the + * flags to write them, if it returns false there was a problem and an error + * message has already been output (but the colorspace may still need to be + * synced to record the invalid flag). + */ +#endif /* sRGB */ + +#ifdef PNG_iCCP_SUPPORTED +PNG_INTERNAL_FUNCTION(int,png_colorspace_set_ICC,(png_const_structrp png_ptr, + png_colorspacerp colorspace, png_const_charp name, + png_uint_32 profile_length, png_const_bytep profile, int color_type), + PNG_EMPTY); + /* The 'name' is used for information only */ + +/* Routines for checking parts of an ICC profile. */ +PNG_INTERNAL_FUNCTION(int,png_icc_check_length,(png_const_structrp png_ptr, + png_colorspacerp colorspace, png_const_charp name, + png_uint_32 profile_length), PNG_EMPTY); +PNG_INTERNAL_FUNCTION(int,png_icc_check_header,(png_const_structrp png_ptr, + png_colorspacerp colorspace, png_const_charp name, + png_uint_32 profile_length, + png_const_bytep profile /* first 132 bytes only */, int color_type), + PNG_EMPTY); +PNG_INTERNAL_FUNCTION(int,png_icc_check_tag_table,(png_const_structrp png_ptr, + png_colorspacerp colorspace, png_const_charp name, + png_uint_32 profile_length, + png_const_bytep profile /* header plus whole tag table */), PNG_EMPTY); +#ifdef PNG_sRGB_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_icc_set_sRGB,( + png_const_structrp png_ptr, png_colorspacerp colorspace, + png_const_bytep profile, uLong adler), PNG_EMPTY); + /* 'adler' is the Adler32 checksum of the uncompressed profile data. It may + * be zero to indicate that it is not available. It is used, if provided, + * as a fast check on the profile when checking to see if it is sRGB. + */ +#endif +#endif /* iCCP */ + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_colorspace_set_rgb_coefficients, + (png_structrp png_ptr), PNG_EMPTY); + /* Set the rgb_to_gray coefficients from the colorspace Y values */ +#endif /* READ_RGB_TO_GRAY */ +#endif /* COLORSPACE */ + +/* Added at libpng version 1.4.0 */ +PNG_INTERNAL_FUNCTION(void,png_check_IHDR,(png_const_structrp png_ptr, + png_uint_32 width, png_uint_32 height, int bit_depth, + int color_type, int interlace_type, int compression_type, + int filter_type),PNG_EMPTY); + +/* Added at libpng version 1.5.10 */ +#if defined(PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED) || \ + defined(PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED) +PNG_INTERNAL_FUNCTION(void,png_do_check_palette_indexes, + (png_structrp png_ptr, png_row_infop row_info),PNG_EMPTY); +#endif + +#if defined(PNG_FLOATING_POINT_SUPPORTED) && defined(PNG_ERROR_TEXT_SUPPORTED) +PNG_INTERNAL_FUNCTION(void,png_fixed_error,(png_const_structrp png_ptr, + png_const_charp name),PNG_NORETURN); +#endif + +/* Puts 'string' into 'buffer' at buffer[pos], taking care never to overwrite + * the end. Always leaves the buffer nul terminated. Never errors out (and + * there is no error code.) + */ +PNG_INTERNAL_FUNCTION(size_t,png_safecat,(png_charp buffer, size_t bufsize, + size_t pos, png_const_charp string),PNG_EMPTY); + +/* Various internal functions to handle formatted warning messages, currently + * only implemented for warnings. + */ +#if defined(PNG_WARNINGS_SUPPORTED) || defined(PNG_TIME_RFC1123_SUPPORTED) +/* Utility to dump an unsigned value into a buffer, given a start pointer and + * and end pointer (which should point just *beyond* the end of the buffer!) + * Returns the pointer to the start of the formatted string. This utility only + * does unsigned values. + */ +PNG_INTERNAL_FUNCTION(png_charp,png_format_number,(png_const_charp start, + png_charp end, int format, png_alloc_size_t number),PNG_EMPTY); + +/* Convenience macro that takes an array: */ +#define PNG_FORMAT_NUMBER(buffer,format,number) \ + png_format_number(buffer, buffer + (sizeof buffer), format, number) + +/* Suggested size for a number buffer (enough for 64 bits and a sign!) */ +#define PNG_NUMBER_BUFFER_SIZE 24 + +/* These are the integer formats currently supported, the name is formed from + * the standard printf(3) format string. + */ +#define PNG_NUMBER_FORMAT_u 1 /* chose unsigned API! */ +#define PNG_NUMBER_FORMAT_02u 2 +#define PNG_NUMBER_FORMAT_d 1 /* chose signed API! */ +#define PNG_NUMBER_FORMAT_02d 2 +#define PNG_NUMBER_FORMAT_x 3 +#define PNG_NUMBER_FORMAT_02x 4 +#define PNG_NUMBER_FORMAT_fixed 5 /* choose the signed API */ +#endif + +#ifdef PNG_WARNINGS_SUPPORTED +/* New defines and members adding in libpng-1.5.4 */ +# define PNG_WARNING_PARAMETER_SIZE 32 +# define PNG_WARNING_PARAMETER_COUNT 8 /* Maximum 9; see pngerror.c */ + +/* An l-value of this type has to be passed to the APIs below to cache the + * values of the parameters to a formatted warning message. + */ +typedef char png_warning_parameters[PNG_WARNING_PARAMETER_COUNT][ + PNG_WARNING_PARAMETER_SIZE]; + +PNG_INTERNAL_FUNCTION(void,png_warning_parameter,(png_warning_parameters p, + int number, png_const_charp string),PNG_EMPTY); + /* Parameters are limited in size to PNG_WARNING_PARAMETER_SIZE characters, + * including the trailing '\0'. + */ +PNG_INTERNAL_FUNCTION(void,png_warning_parameter_unsigned, + (png_warning_parameters p, int number, int format, png_alloc_size_t value), + PNG_EMPTY); + /* Use png_alloc_size_t because it is an unsigned type as big as any we + * need to output. Use the following for a signed value. + */ +PNG_INTERNAL_FUNCTION(void,png_warning_parameter_signed, + (png_warning_parameters p, int number, int format, png_int_32 value), + PNG_EMPTY); + +PNG_INTERNAL_FUNCTION(void,png_formatted_warning,(png_const_structrp png_ptr, + png_warning_parameters p, png_const_charp message),PNG_EMPTY); + /* 'message' follows the X/Open approach of using @1, @2 to insert + * parameters previously supplied using the above functions. Errors in + * specifying the parameters will simply result in garbage substitutions. + */ +#endif + +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +/* Application errors (new in 1.6); use these functions (declared below) for + * errors in the parameters or order of API function calls on read. The + * 'warning' should be used for an error that can be handled completely; the + * 'error' for one which can be handled safely but which may lose application + * information or settings. + * + * By default these both result in a png_error call prior to release, while in a + * released version the 'warning' is just a warning. However if the application + * explicitly disables benign errors (explicitly permitting the code to lose + * information) they both turn into warnings. + * + * If benign errors aren't supported they end up as the corresponding base call + * (png_warning or png_error.) + */ +PNG_INTERNAL_FUNCTION(void,png_app_warning,(png_const_structrp png_ptr, + png_const_charp message),PNG_EMPTY); + /* The application provided invalid parameters to an API function or called + * an API function at the wrong time, libpng can completely recover. + */ + +PNG_INTERNAL_FUNCTION(void,png_app_error,(png_const_structrp png_ptr, + png_const_charp message),PNG_EMPTY); + /* As above but libpng will ignore the call, or attempt some other partial + * recovery from the error. + */ +#else +# define png_app_warning(pp,s) png_warning(pp,s) +# define png_app_error(pp,s) png_error(pp,s) +#endif + +PNG_INTERNAL_FUNCTION(void,png_chunk_report,(png_const_structrp png_ptr, + png_const_charp message, int error),PNG_EMPTY); + /* Report a recoverable issue in chunk data. On read this is used to report + * a problem found while reading a particular chunk and the + * png_chunk_benign_error or png_chunk_warning function is used as + * appropriate. On write this is used to report an error that comes from + * data set via an application call to a png_set_ API and png_app_error or + * png_app_warning is used as appropriate. + * + * The 'error' parameter must have one of the following values: + */ +#define PNG_CHUNK_WARNING 0 /* never an error */ +#define PNG_CHUNK_WRITE_ERROR 1 /* an error only on write */ +#define PNG_CHUNK_ERROR 2 /* always an error */ + +/* ASCII to FP interfaces, currently only implemented if sCAL + * support is required. + */ +#if defined(PNG_sCAL_SUPPORTED) +/* MAX_DIGITS is actually the maximum number of characters in an sCAL + * width or height, derived from the precision (number of significant + * digits - a build time settable option) and assumptions about the + * maximum ridiculous exponent. + */ +#define PNG_sCAL_MAX_DIGITS (PNG_sCAL_PRECISION+1/*.*/+1/*E*/+10/*exponent*/) + +#ifdef PNG_FLOATING_POINT_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_ascii_from_fp,(png_const_structrp png_ptr, + png_charp ascii, png_size_t size, double fp, unsigned int precision), + PNG_EMPTY); +#endif /* FLOATING_POINT */ + +#ifdef PNG_FIXED_POINT_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_ascii_from_fixed,(png_const_structrp png_ptr, + png_charp ascii, png_size_t size, png_fixed_point fp),PNG_EMPTY); +#endif /* FIXED_POINT */ +#endif /* sCAL */ + +#if defined(PNG_sCAL_SUPPORTED) || defined(PNG_pCAL_SUPPORTED) +/* An internal API to validate the format of a floating point number. + * The result is the index of the next character. If the number is + * not valid it will be the index of a character in the supposed number. + * + * The format of a number is defined in the PNG extensions specification + * and this API is strictly conformant to that spec, not anyone elses! + * + * The format as a regular expression is: + * + * [+-]?[0-9]+.?([Ee][+-]?[0-9]+)? + * + * or: + * + * [+-]?.[0-9]+(.[0-9]+)?([Ee][+-]?[0-9]+)? + * + * The complexity is that either integer or fraction must be present and the + * fraction is permitted to have no digits only if the integer is present. + * + * NOTE: The dangling E problem. + * There is a PNG valid floating point number in the following: + * + * PNG floating point numbers are not greedy. + * + * Working this out requires *TWO* character lookahead (because of the + * sign), the parser does not do this - it will fail at the 'r' - this + * doesn't matter for PNG sCAL chunk values, but it requires more care + * if the value were ever to be embedded in something more complex. Use + * ANSI-C strtod if you need the lookahead. + */ +/* State table for the parser. */ +#define PNG_FP_INTEGER 0 /* before or in integer */ +#define PNG_FP_FRACTION 1 /* before or in fraction */ +#define PNG_FP_EXPONENT 2 /* before or in exponent */ +#define PNG_FP_STATE 3 /* mask for the above */ +#define PNG_FP_SAW_SIGN 4 /* Saw +/- in current state */ +#define PNG_FP_SAW_DIGIT 8 /* Saw a digit in current state */ +#define PNG_FP_SAW_DOT 16 /* Saw a dot in current state */ +#define PNG_FP_SAW_E 32 /* Saw an E (or e) in current state */ +#define PNG_FP_SAW_ANY 60 /* Saw any of the above 4 */ + +/* These three values don't affect the parser. They are set but not used. + */ +#define PNG_FP_WAS_VALID 64 /* Preceding substring is a valid fp number */ +#define PNG_FP_NEGATIVE 128 /* A negative number, including "-0" */ +#define PNG_FP_NONZERO 256 /* A non-zero value */ +#define PNG_FP_STICKY 448 /* The above three flags */ + +/* This is available for the caller to store in 'state' if required. Do not + * call the parser after setting it (the parser sometimes clears it.) + */ +#define PNG_FP_INVALID 512 /* Available for callers as a distinct value */ + +/* Result codes for the parser (boolean - true meants ok, false means + * not ok yet.) + */ +#define PNG_FP_MAYBE 0 /* The number may be valid in the future */ +#define PNG_FP_OK 1 /* The number is valid */ + +/* Tests on the sticky non-zero and negative flags. To pass these checks + * the state must also indicate that the whole number is valid - this is + * achieved by testing PNG_FP_SAW_DIGIT (see the implementation for why this + * is equivalent to PNG_FP_OK above.) + */ +#define PNG_FP_NZ_MASK (PNG_FP_SAW_DIGIT | PNG_FP_NEGATIVE | PNG_FP_NONZERO) + /* NZ_MASK: the string is valid and a non-zero negative value */ +#define PNG_FP_Z_MASK (PNG_FP_SAW_DIGIT | PNG_FP_NONZERO) + /* Z MASK: the string is valid and a non-zero value. */ + /* PNG_FP_SAW_DIGIT: the string is valid. */ +#define PNG_FP_IS_ZERO(state) (((state) & PNG_FP_Z_MASK) == PNG_FP_SAW_DIGIT) +#define PNG_FP_IS_POSITIVE(state) (((state) & PNG_FP_NZ_MASK) == PNG_FP_Z_MASK) +#define PNG_FP_IS_NEGATIVE(state) (((state) & PNG_FP_NZ_MASK) == PNG_FP_NZ_MASK) + +/* The actual parser. This can be called repeatedly. It updates + * the index into the string and the state variable (which must + * be initialized to 0). It returns a result code, as above. There + * is no point calling the parser any more if it fails to advance to + * the end of the string - it is stuck on an invalid character (or + * terminated by '\0'). + * + * Note that the pointer will consume an E or even an E+ and then leave + * a 'maybe' state even though a preceding integer.fraction is valid. + * The PNG_FP_WAS_VALID flag indicates that a preceding substring was + * a valid number. It's possible to recover from this by calling + * the parser again (from the start, with state 0) but with a string + * that omits the last character (i.e. set the size to the index of + * the problem character.) This has not been tested within libpng. + */ +PNG_INTERNAL_FUNCTION(int,png_check_fp_number,(png_const_charp string, + png_size_t size, int *statep, png_size_tp whereami),PNG_EMPTY); + +/* This is the same but it checks a complete string and returns true + * only if it just contains a floating point number. As of 1.5.4 this + * function also returns the state at the end of parsing the number if + * it was valid (otherwise it returns 0.) This can be used for testing + * for negative or zero values using the sticky flag. + */ +PNG_INTERNAL_FUNCTION(int,png_check_fp_string,(png_const_charp string, + png_size_t size),PNG_EMPTY); +#endif /* pCAL || sCAL */ + +#if defined(PNG_READ_GAMMA_SUPPORTED) ||\ + defined(PNG_INCH_CONVERSIONS_SUPPORTED) || defined(PNG_READ_pHYs_SUPPORTED) +/* Added at libpng version 1.5.0 */ +/* This is a utility to provide a*times/div (rounded) and indicate + * if there is an overflow. The result is a boolean - false (0) + * for overflow, true (1) if no overflow, in which case *res + * holds the result. + */ +PNG_INTERNAL_FUNCTION(int,png_muldiv,(png_fixed_point_p res, png_fixed_point a, + png_int_32 multiplied_by, png_int_32 divided_by),PNG_EMPTY); +#endif + +#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_INCH_CONVERSIONS_SUPPORTED) +/* Same deal, but issue a warning on overflow and return 0. */ +PNG_INTERNAL_FUNCTION(png_fixed_point,png_muldiv_warn, + (png_const_structrp png_ptr, png_fixed_point a, png_int_32 multiplied_by, + png_int_32 divided_by),PNG_EMPTY); +#endif + +#ifdef PNG_GAMMA_SUPPORTED +/* Calculate a reciprocal - used for gamma values. This returns + * 0 if the argument is 0 in order to maintain an undefined value; + * there are no warnings. + */ +PNG_INTERNAL_FUNCTION(png_fixed_point,png_reciprocal,(png_fixed_point a), + PNG_EMPTY); + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* The same but gives a reciprocal of the product of two fixed point + * values. Accuracy is suitable for gamma calculations but this is + * not exact - use png_muldiv for that. Only required at present on read. + */ +PNG_INTERNAL_FUNCTION(png_fixed_point,png_reciprocal2,(png_fixed_point a, + png_fixed_point b),PNG_EMPTY); +#endif + +/* Return true if the gamma value is significantly different from 1.0 */ +PNG_INTERNAL_FUNCTION(int,png_gamma_significant,(png_fixed_point gamma_value), + PNG_EMPTY); +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* Internal fixed point gamma correction. These APIs are called as + * required to convert single values - they don't need to be fast, + * they are not used when processing image pixel values. + * + * While the input is an 'unsigned' value it must actually be the + * correct bit value - 0..255 or 0..65535 as required. + */ +PNG_INTERNAL_FUNCTION(png_uint_16,png_gamma_correct,(png_structrp png_ptr, + unsigned int value, png_fixed_point gamma_value),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(png_uint_16,png_gamma_16bit_correct,(unsigned int value, + png_fixed_point gamma_value),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(png_byte,png_gamma_8bit_correct,(unsigned int value, + png_fixed_point gamma_value),PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_destroy_gamma_table,(png_structrp png_ptr), + PNG_EMPTY); +PNG_INTERNAL_FUNCTION(void,png_build_gamma_table,(png_structrp png_ptr, + int bit_depth),PNG_EMPTY); +#endif + +/* SIMPLIFIED READ/WRITE SUPPORT */ +#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) ||\ + defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) +/* The internal structure that png_image::opaque points to. */ +typedef struct png_control +{ + png_structp png_ptr; + png_infop info_ptr; + png_voidp error_buf; /* Always a jmp_buf at present. */ + + png_const_bytep memory; /* Memory buffer. */ + png_size_t size; /* Size of the memory buffer. */ + + unsigned int for_write :1; /* Otherwise it is a read structure */ + unsigned int owned_file :1; /* We own the file in io_ptr */ +} png_control; + +/* Return the pointer to the jmp_buf from a png_control: necessary because C + * does not reveal the type of the elements of jmp_buf. + */ +#ifdef __cplusplus +# define png_control_jmp_buf(pc) (((jmp_buf*)((pc)->error_buf))[0]) +#else +# define png_control_jmp_buf(pc) ((pc)->error_buf) +#endif + +/* Utility to safely execute a piece of libpng code catching and logging any + * errors that might occur. Returns true on success, false on failure (either + * of the function or as a result of a png_error.) + */ +PNG_INTERNAL_FUNCTION(void,png_safe_error,(png_structp png_ptr, + png_const_charp error_message),PNG_NORETURN); + +#ifdef PNG_WARNINGS_SUPPORTED +PNG_INTERNAL_FUNCTION(void,png_safe_warning,(png_structp png_ptr, + png_const_charp warning_message),PNG_EMPTY); +#else +# define png_safe_warning 0/*dummy argument*/ +#endif + +PNG_INTERNAL_FUNCTION(int,png_safe_execute,(png_imagep image, + int (*function)(png_voidp), png_voidp arg),PNG_EMPTY); + +/* Utility to log an error; this also cleans up the png_image; the function + * always returns 0 (false). + */ +PNG_INTERNAL_FUNCTION(int,png_image_error,(png_imagep image, + png_const_charp error_message),PNG_EMPTY); + +#ifndef PNG_SIMPLIFIED_READ_SUPPORTED +/* png_image_free is used by the write code but not exported */ +PNG_INTERNAL_FUNCTION(void, png_image_free, (png_imagep image), PNG_EMPTY); +#endif /* !SIMPLIFIED_READ */ + +#endif /* SIMPLIFIED READ/WRITE */ + +#ifdef PNG_FILTER_OPTIMIZATIONS +PNG_INTERNAL_FUNCTION(void, PNG_FILTER_OPTIMIZATIONS, (png_structp png_ptr, + unsigned int bpp), PNG_EMPTY); + /* This is the initialization function for hardware specific optimizations, + * one implementation (for ARM NEON machines) is contained in + * arm/filter_neon.c. It need not be defined - the generic code will be used + * if not. + */ +#endif + +/* Maintainer: Put new private prototypes here ^ */ + +#include "pngdebug.h" + +#ifdef __cplusplus +} +#endif + +#endif /* PNG_VERSION_INFO_ONLY */ +#endif /* PNGPRIV_H */ diff --git a/src/SDL2/external/libpng-1.6.2/pngread.c b/src/SDL2/external/libpng-1.6.2/pngread.c new file mode 100644 index 000000000..e32f31d54 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngread.c @@ -0,0 +1,4000 @@ + +/* pngread.c - read a PNG file + * + * Last changed in libpng 1.6.1 [March 28, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * This file contains routines that an application calls directly to + * read a PNG file or stream. + */ + +#include "pngpriv.h" +#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) && defined(PNG_STDIO_SUPPORTED) +# include +#endif + +#ifdef PNG_READ_SUPPORTED + +/* Create a PNG structure for reading, and allocate any memory needed. */ +PNG_FUNCTION(png_structp,PNGAPI +png_create_read_struct,(png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn),PNG_ALLOCATED) +{ +#ifndef PNG_USER_MEM_SUPPORTED + png_structp png_ptr = png_create_png_struct(user_png_ver, error_ptr, + error_fn, warn_fn, NULL, NULL, NULL); +#else + return png_create_read_struct_2(user_png_ver, error_ptr, error_fn, + warn_fn, NULL, NULL, NULL); +} + +/* Alternate create PNG structure for reading, and allocate any memory + * needed. + */ +PNG_FUNCTION(png_structp,PNGAPI +png_create_read_struct_2,(png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn, png_voidp mem_ptr, + png_malloc_ptr malloc_fn, png_free_ptr free_fn),PNG_ALLOCATED) +{ + png_structp png_ptr = png_create_png_struct(user_png_ver, error_ptr, + error_fn, warn_fn, mem_ptr, malloc_fn, free_fn); +#endif /* PNG_USER_MEM_SUPPORTED */ + + if (png_ptr != NULL) + { + png_ptr->mode = PNG_IS_READ_STRUCT; + + /* Added in libpng-1.6.0; this can be used to detect a read structure if + * required (it will be zero in a write structure.) + */ +# ifdef PNG_SEQUENTIAL_READ_SUPPORTED + png_ptr->IDAT_read_size = PNG_IDAT_READ_SIZE; +# endif + +# ifdef PNG_BENIGN_READ_ERRORS_SUPPORTED + png_ptr->flags |= PNG_FLAG_BENIGN_ERRORS_WARN; + + /* In stable builds only warn if an application error can be completely + * handled. + */ +# if PNG_LIBPNG_BUILD_BASE_TYPE >= PNG_LIBPNG_BUILD_RC + png_ptr->flags |= PNG_FLAG_APP_WARNINGS_WARN; +# endif +# endif + + /* TODO: delay this, it can be done in png_init_io (if the app doesn't + * do it itself) avoiding setting the default function if it is not + * required. + */ + png_set_read_fn(png_ptr, NULL, NULL); + } + + return png_ptr; +} + + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the information before the actual image data. This has been + * changed in v0.90 to allow reading a file that already has the magic + * bytes read from the stream. You can tell libpng how many bytes have + * been read from the beginning of the stream (up to the maximum of 8) + * via png_set_sig_bytes(), and we will only check the remaining bytes + * here. The application can then have access to the signature bytes we + * read if it is determined that this isn't a valid PNG file. + */ +void PNGAPI +png_read_info(png_structrp png_ptr, png_inforp info_ptr) +{ +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED + int keep; +#endif + + png_debug(1, "in png_read_info"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + /* Read and check the PNG file signature. */ + png_read_sig(png_ptr, info_ptr); + + for (;;) + { + png_uint_32 length = png_read_chunk_header(png_ptr); + png_uint_32 chunk_name = png_ptr->chunk_name; + + /* IDAT logic needs to happen here to simplify getting the two flags + * right. + */ + if (chunk_name == png_IDAT) + { + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "Missing IHDR before IDAT"); + + else if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE && + !(png_ptr->mode & PNG_HAVE_PLTE)) + png_chunk_error(png_ptr, "Missing PLTE before IDAT"); + + else if (png_ptr->mode & PNG_AFTER_IDAT) + png_chunk_benign_error(png_ptr, "Too many IDATs found"); + + png_ptr->mode |= PNG_HAVE_IDAT; + } + + else if (png_ptr->mode & PNG_HAVE_IDAT) + png_ptr->mode |= PNG_AFTER_IDAT; + + /* This should be a binary subdivision search or a hash for + * matching the chunk name rather than a linear search. + */ + if (chunk_name == png_IHDR) + png_handle_IHDR(png_ptr, info_ptr, length); + + else if (chunk_name == png_IEND) + png_handle_IEND(png_ptr, info_ptr, length); + +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED + else if ((keep = png_chunk_unknown_handling(png_ptr, chunk_name)) != 0) + { + png_handle_unknown(png_ptr, info_ptr, length, keep); + + if (chunk_name == png_PLTE) + png_ptr->mode |= PNG_HAVE_PLTE; + + else if (chunk_name == png_IDAT) + { + png_ptr->idat_size = 0; /* It has been consumed */ + break; + } + } +#endif + else if (chunk_name == png_PLTE) + png_handle_PLTE(png_ptr, info_ptr, length); + + else if (chunk_name == png_IDAT) + { + png_ptr->idat_size = length; + break; + } + +#ifdef PNG_READ_bKGD_SUPPORTED + else if (chunk_name == png_bKGD) + png_handle_bKGD(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_cHRM_SUPPORTED + else if (chunk_name == png_cHRM) + png_handle_cHRM(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_gAMA_SUPPORTED + else if (chunk_name == png_gAMA) + png_handle_gAMA(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_hIST_SUPPORTED + else if (chunk_name == png_hIST) + png_handle_hIST(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_oFFs_SUPPORTED + else if (chunk_name == png_oFFs) + png_handle_oFFs(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_pCAL_SUPPORTED + else if (chunk_name == png_pCAL) + png_handle_pCAL(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_sCAL_SUPPORTED + else if (chunk_name == png_sCAL) + png_handle_sCAL(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_pHYs_SUPPORTED + else if (chunk_name == png_pHYs) + png_handle_pHYs(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_sBIT_SUPPORTED + else if (chunk_name == png_sBIT) + png_handle_sBIT(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_sRGB_SUPPORTED + else if (chunk_name == png_sRGB) + png_handle_sRGB(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_iCCP_SUPPORTED + else if (chunk_name == png_iCCP) + png_handle_iCCP(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_sPLT_SUPPORTED + else if (chunk_name == png_sPLT) + png_handle_sPLT(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_tEXt_SUPPORTED + else if (chunk_name == png_tEXt) + png_handle_tEXt(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_tIME_SUPPORTED + else if (chunk_name == png_tIME) + png_handle_tIME(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_tRNS_SUPPORTED + else if (chunk_name == png_tRNS) + png_handle_tRNS(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_zTXt_SUPPORTED + else if (chunk_name == png_zTXt) + png_handle_zTXt(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_iTXt_SUPPORTED + else if (chunk_name == png_iTXt) + png_handle_iTXt(png_ptr, info_ptr, length); +#endif + + else + png_handle_unknown(png_ptr, info_ptr, length, + PNG_HANDLE_CHUNK_AS_DEFAULT); + } +} +#endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ + +/* Optional call to update the users info_ptr structure */ +void PNGAPI +png_read_update_info(png_structrp png_ptr, png_inforp info_ptr) +{ + png_debug(1, "in png_read_update_info"); + + if (png_ptr != NULL) + { + if ((png_ptr->flags & PNG_FLAG_ROW_INIT) == 0) + { + png_read_start_row(png_ptr); + +# ifdef PNG_READ_TRANSFORMS_SUPPORTED + png_read_transform_info(png_ptr, info_ptr); +# else + PNG_UNUSED(info_ptr) +# endif + } + + /* New in 1.6.0 this avoids the bug of doing the initializations twice */ + else + png_app_error(png_ptr, + "png_read_update_info/png_start_read_image: duplicate call"); + } +} + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Initialize palette, background, etc, after transformations + * are set, but before any reading takes place. This allows + * the user to obtain a gamma-corrected palette, for example. + * If the user doesn't call this, we will do it ourselves. + */ +void PNGAPI +png_start_read_image(png_structrp png_ptr) +{ + png_debug(1, "in png_start_read_image"); + + if (png_ptr != NULL) + { + if ((png_ptr->flags & PNG_FLAG_ROW_INIT) == 0) + png_read_start_row(png_ptr); + + /* New in 1.6.0 this avoids the bug of doing the initializations twice */ + else + png_app_error(png_ptr, + "png_start_read_image/png_read_update_info: duplicate call"); + } +} +#endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +void PNGAPI +png_read_row(png_structrp png_ptr, png_bytep row, png_bytep dsp_row) +{ + png_row_info row_info; + + if (png_ptr == NULL) + return; + + png_debug2(1, "in png_read_row (row %lu, pass %d)", + (unsigned long)png_ptr->row_number, png_ptr->pass); + + /* png_read_start_row sets the information (in particular iwidth) for this + * interlace pass. + */ + if (!(png_ptr->flags & PNG_FLAG_ROW_INIT)) + png_read_start_row(png_ptr); + + /* 1.5.6: row_info moved out of png_struct to a local here. */ + row_info.width = png_ptr->iwidth; /* NOTE: width of current interlaced row */ + row_info.color_type = png_ptr->color_type; + row_info.bit_depth = png_ptr->bit_depth; + row_info.channels = png_ptr->channels; + row_info.pixel_depth = png_ptr->pixel_depth; + row_info.rowbytes = PNG_ROWBYTES(row_info.pixel_depth, row_info.width); + + if (png_ptr->row_number == 0 && png_ptr->pass == 0) + { + /* Check for transforms that have been set but were defined out */ +#if defined(PNG_WRITE_INVERT_SUPPORTED) && !defined(PNG_READ_INVERT_SUPPORTED) + if (png_ptr->transformations & PNG_INVERT_MONO) + png_warning(png_ptr, "PNG_READ_INVERT_SUPPORTED is not defined"); +#endif + +#if defined(PNG_WRITE_FILLER_SUPPORTED) && !defined(PNG_READ_FILLER_SUPPORTED) + if (png_ptr->transformations & PNG_FILLER) + png_warning(png_ptr, "PNG_READ_FILLER_SUPPORTED is not defined"); +#endif + +#if defined(PNG_WRITE_PACKSWAP_SUPPORTED) && \ + !defined(PNG_READ_PACKSWAP_SUPPORTED) + if (png_ptr->transformations & PNG_PACKSWAP) + png_warning(png_ptr, "PNG_READ_PACKSWAP_SUPPORTED is not defined"); +#endif + +#if defined(PNG_WRITE_PACK_SUPPORTED) && !defined(PNG_READ_PACK_SUPPORTED) + if (png_ptr->transformations & PNG_PACK) + png_warning(png_ptr, "PNG_READ_PACK_SUPPORTED is not defined"); +#endif + +#if defined(PNG_WRITE_SHIFT_SUPPORTED) && !defined(PNG_READ_SHIFT_SUPPORTED) + if (png_ptr->transformations & PNG_SHIFT) + png_warning(png_ptr, "PNG_READ_SHIFT_SUPPORTED is not defined"); +#endif + +#if defined(PNG_WRITE_BGR_SUPPORTED) && !defined(PNG_READ_BGR_SUPPORTED) + if (png_ptr->transformations & PNG_BGR) + png_warning(png_ptr, "PNG_READ_BGR_SUPPORTED is not defined"); +#endif + +#if defined(PNG_WRITE_SWAP_SUPPORTED) && !defined(PNG_READ_SWAP_SUPPORTED) + if (png_ptr->transformations & PNG_SWAP_BYTES) + png_warning(png_ptr, "PNG_READ_SWAP_SUPPORTED is not defined"); +#endif + } + +#ifdef PNG_READ_INTERLACING_SUPPORTED + /* If interlaced and we do not need a new row, combine row and return. + * Notice that the pixels we have from previous rows have been transformed + * already; we can only combine like with like (transformed or + * untransformed) and, because of the libpng API for interlaced images, this + * means we must transform before de-interlacing. + */ + if (png_ptr->interlaced && (png_ptr->transformations & PNG_INTERLACE)) + { + switch (png_ptr->pass) + { + case 0: + if (png_ptr->row_number & 0x07) + { + if (dsp_row != NULL) + png_combine_row(png_ptr, dsp_row, 1/*display*/); + png_read_finish_row(png_ptr); + return; + } + break; + + case 1: + if ((png_ptr->row_number & 0x07) || png_ptr->width < 5) + { + if (dsp_row != NULL) + png_combine_row(png_ptr, dsp_row, 1/*display*/); + + png_read_finish_row(png_ptr); + return; + } + break; + + case 2: + if ((png_ptr->row_number & 0x07) != 4) + { + if (dsp_row != NULL && (png_ptr->row_number & 4)) + png_combine_row(png_ptr, dsp_row, 1/*display*/); + + png_read_finish_row(png_ptr); + return; + } + break; + + case 3: + if ((png_ptr->row_number & 3) || png_ptr->width < 3) + { + if (dsp_row != NULL) + png_combine_row(png_ptr, dsp_row, 1/*display*/); + + png_read_finish_row(png_ptr); + return; + } + break; + + case 4: + if ((png_ptr->row_number & 3) != 2) + { + if (dsp_row != NULL && (png_ptr->row_number & 2)) + png_combine_row(png_ptr, dsp_row, 1/*display*/); + + png_read_finish_row(png_ptr); + return; + } + break; + + case 5: + if ((png_ptr->row_number & 1) || png_ptr->width < 2) + { + if (dsp_row != NULL) + png_combine_row(png_ptr, dsp_row, 1/*display*/); + + png_read_finish_row(png_ptr); + return; + } + break; + + default: + case 6: + if (!(png_ptr->row_number & 1)) + { + png_read_finish_row(png_ptr); + return; + } + break; + } + } +#endif + + if (!(png_ptr->mode & PNG_HAVE_IDAT)) + png_error(png_ptr, "Invalid attempt to read row data"); + + /* Fill the row with IDAT data: */ + png_read_IDAT_data(png_ptr, png_ptr->row_buf, row_info.rowbytes + 1); + + if (png_ptr->row_buf[0] > PNG_FILTER_VALUE_NONE) + { + if (png_ptr->row_buf[0] < PNG_FILTER_VALUE_LAST) + png_read_filter_row(png_ptr, &row_info, png_ptr->row_buf + 1, + png_ptr->prev_row + 1, png_ptr->row_buf[0]); + else + png_error(png_ptr, "bad adaptive filter value"); + } + + /* libpng 1.5.6: the following line was copying png_ptr->rowbytes before + * 1.5.6, while the buffer really is this big in current versions of libpng + * it may not be in the future, so this was changed just to copy the + * interlaced count: + */ + memcpy(png_ptr->prev_row, png_ptr->row_buf, row_info.rowbytes + 1); + +#ifdef PNG_MNG_FEATURES_SUPPORTED + if ((png_ptr->mng_features_permitted & PNG_FLAG_MNG_FILTER_64) && + (png_ptr->filter_type == PNG_INTRAPIXEL_DIFFERENCING)) + { + /* Intrapixel differencing */ + png_do_read_intrapixel(&row_info, png_ptr->row_buf + 1); + } +#endif + + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED + if (png_ptr->transformations) + png_do_read_transformations(png_ptr, &row_info); +#endif + + /* The transformed pixel depth should match the depth now in row_info. */ + if (png_ptr->transformed_pixel_depth == 0) + { + png_ptr->transformed_pixel_depth = row_info.pixel_depth; + if (row_info.pixel_depth > png_ptr->maximum_pixel_depth) + png_error(png_ptr, "sequential row overflow"); + } + + else if (png_ptr->transformed_pixel_depth != row_info.pixel_depth) + png_error(png_ptr, "internal sequential row size calculation error"); + +#ifdef PNG_READ_INTERLACING_SUPPORTED + /* Blow up interlaced rows to full size */ + if (png_ptr->interlaced && + (png_ptr->transformations & PNG_INTERLACE)) + { + if (png_ptr->pass < 6) + png_do_read_interlace(&row_info, png_ptr->row_buf + 1, png_ptr->pass, + png_ptr->transformations); + + if (dsp_row != NULL) + png_combine_row(png_ptr, dsp_row, 1/*display*/); + + if (row != NULL) + png_combine_row(png_ptr, row, 0/*row*/); + } + + else +#endif + { + if (row != NULL) + png_combine_row(png_ptr, row, -1/*ignored*/); + + if (dsp_row != NULL) + png_combine_row(png_ptr, dsp_row, -1/*ignored*/); + } + png_read_finish_row(png_ptr); + + if (png_ptr->read_row_fn != NULL) + (*(png_ptr->read_row_fn))(png_ptr, png_ptr->row_number, png_ptr->pass); + +} +#endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read one or more rows of image data. If the image is interlaced, + * and png_set_interlace_handling() has been called, the rows need to + * contain the contents of the rows from the previous pass. If the + * image has alpha or transparency, and png_handle_alpha()[*] has been + * called, the rows contents must be initialized to the contents of the + * screen. + * + * "row" holds the actual image, and pixels are placed in it + * as they arrive. If the image is displayed after each pass, it will + * appear to "sparkle" in. "display_row" can be used to display a + * "chunky" progressive image, with finer detail added as it becomes + * available. If you do not want this "chunky" display, you may pass + * NULL for display_row. If you do not want the sparkle display, and + * you have not called png_handle_alpha(), you may pass NULL for rows. + * If you have called png_handle_alpha(), and the image has either an + * alpha channel or a transparency chunk, you must provide a buffer for + * rows. In this case, you do not have to provide a display_row buffer + * also, but you may. If the image is not interlaced, or if you have + * not called png_set_interlace_handling(), the display_row buffer will + * be ignored, so pass NULL to it. + * + * [*] png_handle_alpha() does not exist yet, as of this version of libpng + */ + +void PNGAPI +png_read_rows(png_structrp png_ptr, png_bytepp row, + png_bytepp display_row, png_uint_32 num_rows) +{ + png_uint_32 i; + png_bytepp rp; + png_bytepp dp; + + png_debug(1, "in png_read_rows"); + + if (png_ptr == NULL) + return; + + rp = row; + dp = display_row; + if (rp != NULL && dp != NULL) + for (i = 0; i < num_rows; i++) + { + png_bytep rptr = *rp++; + png_bytep dptr = *dp++; + + png_read_row(png_ptr, rptr, dptr); + } + + else if (rp != NULL) + for (i = 0; i < num_rows; i++) + { + png_bytep rptr = *rp; + png_read_row(png_ptr, rptr, NULL); + rp++; + } + + else if (dp != NULL) + for (i = 0; i < num_rows; i++) + { + png_bytep dptr = *dp; + png_read_row(png_ptr, NULL, dptr); + dp++; + } +} +#endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the entire image. If the image has an alpha channel or a tRNS + * chunk, and you have called png_handle_alpha()[*], you will need to + * initialize the image to the current image that PNG will be overlaying. + * We set the num_rows again here, in case it was incorrectly set in + * png_read_start_row() by a call to png_read_update_info() or + * png_start_read_image() if png_set_interlace_handling() wasn't called + * prior to either of these functions like it should have been. You can + * only call this function once. If you desire to have an image for + * each pass of a interlaced image, use png_read_rows() instead. + * + * [*] png_handle_alpha() does not exist yet, as of this version of libpng + */ +void PNGAPI +png_read_image(png_structrp png_ptr, png_bytepp image) +{ + png_uint_32 i, image_height; + int pass, j; + png_bytepp rp; + + png_debug(1, "in png_read_image"); + + if (png_ptr == NULL) + return; + +#ifdef PNG_READ_INTERLACING_SUPPORTED + if (!(png_ptr->flags & PNG_FLAG_ROW_INIT)) + { + pass = png_set_interlace_handling(png_ptr); + /* And make sure transforms are initialized. */ + png_start_read_image(png_ptr); + } + else + { + if (png_ptr->interlaced && !(png_ptr->transformations & PNG_INTERLACE)) + { + /* Caller called png_start_read_image or png_read_update_info without + * first turning on the PNG_INTERLACE transform. We can fix this here, + * but the caller should do it! + */ + png_warning(png_ptr, "Interlace handling should be turned on when " + "using png_read_image"); + /* Make sure this is set correctly */ + png_ptr->num_rows = png_ptr->height; + } + + /* Obtain the pass number, which also turns on the PNG_INTERLACE flag in + * the above error case. + */ + pass = png_set_interlace_handling(png_ptr); + } +#else + if (png_ptr->interlaced) + png_error(png_ptr, + "Cannot read interlaced image -- interlace handler disabled"); + + pass = 1; +#endif + + image_height=png_ptr->height; + + for (j = 0; j < pass; j++) + { + rp = image; + for (i = 0; i < image_height; i++) + { + png_read_row(png_ptr, *rp, NULL); + rp++; + } + } +} +#endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the end of the PNG file. Will not read past the end of the + * file, will verify the end is accurate, and will read any comments + * or time information at the end of the file, if info is not NULL. + */ +void PNGAPI +png_read_end(png_structrp png_ptr, png_inforp info_ptr) +{ +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED + int keep; +#endif + + png_debug(1, "in png_read_end"); + + if (png_ptr == NULL) + return; + + /* If png_read_end is called in the middle of reading the rows there may + * still be pending IDAT data and an owned zstream. Deal with this here. + */ +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED + if (!png_chunk_unknown_handling(png_ptr, png_IDAT)) +#endif + png_read_finish_IDAT(png_ptr); + +#ifdef PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED + /* Report invalid palette index; added at libng-1.5.10 */ + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE && + png_ptr->num_palette_max > png_ptr->num_palette) + png_benign_error(png_ptr, "Read palette index exceeding num_palette"); +#endif + + do + { + png_uint_32 length = png_read_chunk_header(png_ptr); + png_uint_32 chunk_name = png_ptr->chunk_name; + + if (chunk_name == png_IHDR) + png_handle_IHDR(png_ptr, info_ptr, length); + + else if (chunk_name == png_IEND) + png_handle_IEND(png_ptr, info_ptr, length); + +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED + else if ((keep = png_chunk_unknown_handling(png_ptr, chunk_name)) != 0) + { + if (chunk_name == png_IDAT) + { + if ((length > 0) || (png_ptr->mode & PNG_HAVE_CHUNK_AFTER_IDAT)) + png_benign_error(png_ptr, "Too many IDATs found"); + } + png_handle_unknown(png_ptr, info_ptr, length, keep); + if (chunk_name == png_PLTE) + png_ptr->mode |= PNG_HAVE_PLTE; + } +#endif + + else if (chunk_name == png_IDAT) + { + /* Zero length IDATs are legal after the last IDAT has been + * read, but not after other chunks have been read. + */ + if ((length > 0) || (png_ptr->mode & PNG_HAVE_CHUNK_AFTER_IDAT)) + png_benign_error(png_ptr, "Too many IDATs found"); + + png_crc_finish(png_ptr, length); + } + else if (chunk_name == png_PLTE) + png_handle_PLTE(png_ptr, info_ptr, length); + +#ifdef PNG_READ_bKGD_SUPPORTED + else if (chunk_name == png_bKGD) + png_handle_bKGD(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_cHRM_SUPPORTED + else if (chunk_name == png_cHRM) + png_handle_cHRM(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_gAMA_SUPPORTED + else if (chunk_name == png_gAMA) + png_handle_gAMA(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_hIST_SUPPORTED + else if (chunk_name == png_hIST) + png_handle_hIST(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_oFFs_SUPPORTED + else if (chunk_name == png_oFFs) + png_handle_oFFs(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_pCAL_SUPPORTED + else if (chunk_name == png_pCAL) + png_handle_pCAL(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_sCAL_SUPPORTED + else if (chunk_name == png_sCAL) + png_handle_sCAL(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_pHYs_SUPPORTED + else if (chunk_name == png_pHYs) + png_handle_pHYs(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_sBIT_SUPPORTED + else if (chunk_name == png_sBIT) + png_handle_sBIT(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_sRGB_SUPPORTED + else if (chunk_name == png_sRGB) + png_handle_sRGB(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_iCCP_SUPPORTED + else if (chunk_name == png_iCCP) + png_handle_iCCP(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_sPLT_SUPPORTED + else if (chunk_name == png_sPLT) + png_handle_sPLT(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_tEXt_SUPPORTED + else if (chunk_name == png_tEXt) + png_handle_tEXt(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_tIME_SUPPORTED + else if (chunk_name == png_tIME) + png_handle_tIME(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_tRNS_SUPPORTED + else if (chunk_name == png_tRNS) + png_handle_tRNS(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_zTXt_SUPPORTED + else if (chunk_name == png_zTXt) + png_handle_zTXt(png_ptr, info_ptr, length); +#endif + +#ifdef PNG_READ_iTXt_SUPPORTED + else if (chunk_name == png_iTXt) + png_handle_iTXt(png_ptr, info_ptr, length); +#endif + + else + png_handle_unknown(png_ptr, info_ptr, length, + PNG_HANDLE_CHUNK_AS_DEFAULT); + } while (!(png_ptr->mode & PNG_HAVE_IEND)); +} +#endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ + +/* Free all memory used in the read struct */ +static void +png_read_destroy(png_structrp png_ptr) +{ + png_debug(1, "in png_read_destroy"); + +#ifdef PNG_READ_GAMMA_SUPPORTED + png_destroy_gamma_table(png_ptr); +#endif + + png_free(png_ptr, png_ptr->big_row_buf); + png_free(png_ptr, png_ptr->big_prev_row); + png_free(png_ptr, png_ptr->read_buffer); + +#ifdef PNG_READ_QUANTIZE_SUPPORTED + png_free(png_ptr, png_ptr->palette_lookup); + png_free(png_ptr, png_ptr->quantize_index); +#endif + + if (png_ptr->free_me & PNG_FREE_PLTE) + png_zfree(png_ptr, png_ptr->palette); + png_ptr->free_me &= ~PNG_FREE_PLTE; + +#if defined(PNG_tRNS_SUPPORTED) || \ + defined(PNG_READ_EXPAND_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) + if (png_ptr->free_me & PNG_FREE_TRNS) + png_free(png_ptr, png_ptr->trans_alpha); + png_ptr->free_me &= ~PNG_FREE_TRNS; +#endif + + inflateEnd(&png_ptr->zstream); + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED + png_free(png_ptr, png_ptr->save_buffer); +#endif + +#if defined(PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED) &&\ + defined(PNG_READ_UNKNOWN_CHUNKS_SUPPORTED) + png_free(png_ptr, png_ptr->unknown_chunk.data); +#endif + +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED + png_free(png_ptr, png_ptr->chunk_list); +#endif + + /* NOTE: the 'setjmp' buffer may still be allocated and the memory and error + * callbacks are still set at this point. They are required to complete the + * destruction of the png_struct itself. + */ +} + +/* Free all memory used by the read */ +void PNGAPI +png_destroy_read_struct(png_structpp png_ptr_ptr, png_infopp info_ptr_ptr, + png_infopp end_info_ptr_ptr) +{ + png_structrp png_ptr = NULL; + + png_debug(1, "in png_destroy_read_struct"); + + if (png_ptr_ptr != NULL) + png_ptr = *png_ptr_ptr; + + if (png_ptr == NULL) + return; + + /* libpng 1.6.0: use the API to destroy info structs to ensure consistent + * behavior. Prior to 1.6.0 libpng did extra 'info' destruction in this API. + * The extra was, apparently, unnecessary yet this hides memory leak bugs. + */ + png_destroy_info_struct(png_ptr, end_info_ptr_ptr); + png_destroy_info_struct(png_ptr, info_ptr_ptr); + + *png_ptr_ptr = NULL; + png_read_destroy(png_ptr); + png_destroy_png_struct(png_ptr); +} + +void PNGAPI +png_set_read_status_fn(png_structrp png_ptr, png_read_status_ptr read_row_fn) +{ + if (png_ptr == NULL) + return; + + png_ptr->read_row_fn = read_row_fn; +} + + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +#ifdef PNG_INFO_IMAGE_SUPPORTED +void PNGAPI +png_read_png(png_structrp png_ptr, png_inforp info_ptr, + int transforms, + voidp params) +{ + int row; + + if (png_ptr == NULL || info_ptr == NULL) + return; + + /* png_read_info() gives us all of the information from the + * PNG file before the first IDAT (image data chunk). + */ + png_read_info(png_ptr, info_ptr); + if (info_ptr->height > PNG_UINT_32_MAX/(sizeof (png_bytep))) + png_error(png_ptr, "Image is too high to process with png_read_png()"); + + /* -------------- image transformations start here ------------------- */ + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + /* Tell libpng to strip 16-bit/color files down to 8 bits per color. + */ + if (transforms & PNG_TRANSFORM_SCALE_16) + { + /* Added at libpng-1.5.4. "strip_16" produces the same result that it + * did in earlier versions, while "scale_16" is now more accurate. + */ + png_set_scale_16(png_ptr); + } +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED + /* If both SCALE and STRIP are required pngrtran will effectively cancel the + * latter by doing SCALE first. This is ok and allows apps not to check for + * which is supported to get the right answer. + */ + if (transforms & PNG_TRANSFORM_STRIP_16) + png_set_strip_16(png_ptr); +#endif + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED + /* Strip alpha bytes from the input data without combining with + * the background (not recommended). + */ + if (transforms & PNG_TRANSFORM_STRIP_ALPHA) + png_set_strip_alpha(png_ptr); +#endif + +#if defined(PNG_READ_PACK_SUPPORTED) && !defined(PNG_READ_EXPAND_SUPPORTED) + /* Extract multiple pixels with bit depths of 1, 2, or 4 from a single + * byte into separate bytes (useful for paletted and grayscale images). + */ + if (transforms & PNG_TRANSFORM_PACKING) + png_set_packing(png_ptr); +#endif + +#ifdef PNG_READ_PACKSWAP_SUPPORTED + /* Change the order of packed pixels to least significant bit first + * (not useful if you are using png_set_packing). + */ + if (transforms & PNG_TRANSFORM_PACKSWAP) + png_set_packswap(png_ptr); +#endif + +#ifdef PNG_READ_EXPAND_SUPPORTED + /* Expand paletted colors into true RGB triplets + * Expand grayscale images to full 8 bits from 1, 2, or 4 bits/pixel + * Expand paletted or RGB images with transparency to full alpha + * channels so the data will be available as RGBA quartets. + */ + if (transforms & PNG_TRANSFORM_EXPAND) + if ((png_ptr->bit_depth < 8) || + (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) || + (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS))) + png_set_expand(png_ptr); +#endif + + /* We don't handle background color or gamma transformation or quantizing. + */ + +#ifdef PNG_READ_INVERT_SUPPORTED + /* Invert monochrome files to have 0 as white and 1 as black + */ + if (transforms & PNG_TRANSFORM_INVERT_MONO) + png_set_invert_mono(png_ptr); +#endif + +#ifdef PNG_READ_SHIFT_SUPPORTED + /* If you want to shift the pixel values from the range [0,255] or + * [0,65535] to the original [0,7] or [0,31], or whatever range the + * colors were originally in: + */ + if ((transforms & PNG_TRANSFORM_SHIFT) + && png_get_valid(png_ptr, info_ptr, PNG_INFO_sBIT)) + { + png_color_8p sig_bit; + + png_get_sBIT(png_ptr, info_ptr, &sig_bit); + png_set_shift(png_ptr, sig_bit); + } +#endif + +#ifdef PNG_READ_BGR_SUPPORTED + /* Flip the RGB pixels to BGR (or RGBA to BGRA) */ + if (transforms & PNG_TRANSFORM_BGR) + png_set_bgr(png_ptr); +#endif + +#ifdef PNG_READ_SWAP_ALPHA_SUPPORTED + /* Swap the RGBA or GA data to ARGB or AG (or BGRA to ABGR) */ + if (transforms & PNG_TRANSFORM_SWAP_ALPHA) + png_set_swap_alpha(png_ptr); +#endif + +#ifdef PNG_READ_SWAP_SUPPORTED + /* Swap bytes of 16-bit files to least significant byte first */ + if (transforms & PNG_TRANSFORM_SWAP_ENDIAN) + png_set_swap(png_ptr); +#endif + +/* Added at libpng-1.2.41 */ +#ifdef PNG_READ_INVERT_ALPHA_SUPPORTED + /* Invert the alpha channel from opacity to transparency */ + if (transforms & PNG_TRANSFORM_INVERT_ALPHA) + png_set_invert_alpha(png_ptr); +#endif + +/* Added at libpng-1.2.41 */ +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED + /* Expand grayscale image to RGB */ + if (transforms & PNG_TRANSFORM_GRAY_TO_RGB) + png_set_gray_to_rgb(png_ptr); +#endif + +/* Added at libpng-1.5.4 */ +#ifdef PNG_READ_EXPAND_16_SUPPORTED + if (transforms & PNG_TRANSFORM_EXPAND_16) + png_set_expand_16(png_ptr); +#endif + + /* We don't handle adding filler bytes */ + + /* We use png_read_image and rely on that for interlace handling, but we also + * call png_read_update_info therefore must turn on interlace handling now: + */ + (void)png_set_interlace_handling(png_ptr); + + /* Optional call to gamma correct and add the background to the palette + * and update info structure. REQUIRED if you are expecting libpng to + * update the palette for you (i.e., you selected such a transform above). + */ + png_read_update_info(png_ptr, info_ptr); + + /* -------------- image transformations end here ------------------- */ + + png_free_data(png_ptr, info_ptr, PNG_FREE_ROWS, 0); + if (info_ptr->row_pointers == NULL) + { + png_uint_32 iptr; + + info_ptr->row_pointers = (png_bytepp)png_malloc(png_ptr, + info_ptr->height * (sizeof (png_bytep))); + for (iptr=0; iptrheight; iptr++) + info_ptr->row_pointers[iptr] = NULL; + + info_ptr->free_me |= PNG_FREE_ROWS; + + for (row = 0; row < (int)info_ptr->height; row++) + info_ptr->row_pointers[row] = (png_bytep)png_malloc(png_ptr, + png_get_rowbytes(png_ptr, info_ptr)); + } + + png_read_image(png_ptr, info_ptr->row_pointers); + info_ptr->valid |= PNG_INFO_IDAT; + + /* Read rest of file, and get additional chunks in info_ptr - REQUIRED */ + png_read_end(png_ptr, info_ptr); + + PNG_UNUSED(transforms) /* Quiet compiler warnings */ + PNG_UNUSED(params) + +} +#endif /* PNG_INFO_IMAGE_SUPPORTED */ +#endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ + +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED +/* SIMPLIFIED READ + * + * This code currently relies on the sequential reader, though it could easily + * be made to work with the progressive one. + */ +/* Arguments to png_image_finish_read: */ + +/* Encoding of PNG data (used by the color-map code) */ +/* TODO: change these, dang, ANSI-C reserves the 'E' namespace. */ +# define E_NOTSET 0 /* File encoding not yet known */ +# define E_sRGB 1 /* 8-bit encoded to sRGB gamma */ +# define E_LINEAR 2 /* 16-bit linear: not encoded, NOT pre-multiplied! */ +# define E_FILE 3 /* 8-bit encoded to file gamma, not sRGB or linear */ +# define E_LINEAR8 4 /* 8-bit linear: only from a file value */ + +/* Color-map processing: after libpng has run on the PNG image further + * processing may be needed to conver the data to color-map indicies. + */ +#define PNG_CMAP_NONE 0 +#define PNG_CMAP_GA 1 /* Process GA data to a color-map with alpha */ +#define PNG_CMAP_TRANS 2 /* Process GA data to a background index */ +#define PNG_CMAP_RGB 3 /* Process RGB data */ +#define PNG_CMAP_RGB_ALPHA 4 /* Process RGBA data */ + +/* The following document where the background is for each processing case. */ +#define PNG_CMAP_NONE_BACKGROUND 256 +#define PNG_CMAP_GA_BACKGROUND 231 +#define PNG_CMAP_TRANS_BACKGROUND 254 +#define PNG_CMAP_RGB_BACKGROUND 256 +#define PNG_CMAP_RGB_ALPHA_BACKGROUND 216 + +typedef struct +{ + /* Arguments: */ + png_imagep image; + png_voidp buffer; + png_int_32 row_stride; + png_voidp colormap; + png_const_colorp background; + /* Local variables: */ + png_voidp local_row; + png_voidp first_row; + ptrdiff_t row_bytes; /* step between rows */ + int file_encoding; /* E_ values above */ + png_fixed_point gamma_to_linear; /* For E_FILE, reciprocal of gamma */ + int colormap_processing; /* PNG_CMAP_ values above */ +} png_image_read_control; + +/* Do all the *safe* initialization - 'safe' means that png_error won't be + * called, so setting up the jmp_buf is not required. This means that anything + * called from here must *not* call png_malloc - it has to call png_malloc_warn + * instead so that control is returned safely back to this routine. + */ +static int +png_image_read_init(png_imagep image) +{ + if (image->opaque == NULL) + { + png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, image, + png_safe_error, png_safe_warning); + + /* And set the rest of the structure to NULL to ensure that the various + * fields are consistent. + */ + memset(image, 0, (sizeof *image)); + image->version = PNG_IMAGE_VERSION; + + if (png_ptr != NULL) + { + png_infop info_ptr = png_create_info_struct(png_ptr); + + if (info_ptr != NULL) + { + png_controlp control = png_voidcast(png_controlp, + png_malloc_warn(png_ptr, (sizeof *control))); + + if (control != NULL) + { + memset(control, 0, (sizeof *control)); + + control->png_ptr = png_ptr; + control->info_ptr = info_ptr; + control->for_write = 0; + + image->opaque = control; + return 1; + } + + /* Error clean up */ + png_destroy_info_struct(png_ptr, &info_ptr); + } + + png_destroy_read_struct(&png_ptr, NULL, NULL); + } + + return png_image_error(image, "png_image_read: out of memory"); + } + + return png_image_error(image, "png_image_read: opaque pointer not NULL"); +} + +/* Utility to find the base format of a PNG file from a png_struct. */ +static png_uint_32 +png_image_format(png_structrp png_ptr) +{ + png_uint_32 format = 0; + + if (png_ptr->color_type & PNG_COLOR_MASK_COLOR) + format |= PNG_FORMAT_FLAG_COLOR; + + if (png_ptr->color_type & PNG_COLOR_MASK_ALPHA) + format |= PNG_FORMAT_FLAG_ALPHA; + + /* Use png_ptr here, not info_ptr, because by examination png_handle_tRNS + * sets the png_struct fields; that's all we are interested in here. The + * precise interaction with an app call to png_set_tRNS and PNG file reading + * is unclear. + */ + else if (png_ptr->num_trans > 0) + format |= PNG_FORMAT_FLAG_ALPHA; + + if (png_ptr->bit_depth == 16) + format |= PNG_FORMAT_FLAG_LINEAR; + + if (png_ptr->color_type & PNG_COLOR_MASK_PALETTE) + format |= PNG_FORMAT_FLAG_COLORMAP; + + return format; +} + +/* Is the given gamma significantly different from sRGB? The test is the same + * one used in pngrtran.c when deciding whether to do gamma correction. The + * arithmetic optimizes the division by using the fact that the inverse of the + * file sRGB gamma is 2.2 + */ +static int +png_gamma_not_sRGB(png_fixed_point g) +{ + if (g < PNG_FP_1) + { + /* An uninitialized gamma is assumed to be sRGB for the simplified API. */ + if (g == 0) + return 0; + + return png_gamma_significant((g * 11 + 2)/5 /* i.e. *2.2, rounded */); + } + + return 1; +} + +/* Do the main body of a 'png_image_begin_read' function; read the PNG file + * header and fill in all the information. This is executed in a safe context, + * unlike the init routine above. + */ +static int +png_image_read_header(png_voidp argument) +{ + png_imagep image = png_voidcast(png_imagep, argument); + png_structrp png_ptr = image->opaque->png_ptr; + png_inforp info_ptr = image->opaque->info_ptr; + + png_set_benign_errors(png_ptr, 1/*warn*/); + png_read_info(png_ptr, info_ptr); + + /* Do this the fast way; just read directly out of png_struct. */ + image->width = png_ptr->width; + image->height = png_ptr->height; + + { + png_uint_32 format = png_image_format(png_ptr); + + image->format = format; + +#ifdef PNG_COLORSPACE_SUPPORTED + /* Does the colorspace match sRGB? If there is no color endpoint + * (colorant) information assume yes, otherwise require the + * 'ENDPOINTS_MATCHE_sRGB' colorspace flag to have been set. If the + * colorspace has been determined to be invalid ignore it. + */ + if ((format & PNG_FORMAT_FLAG_COLOR) != 0 && ((png_ptr->colorspace.flags + & (PNG_COLORSPACE_HAVE_ENDPOINTS|PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB| + PNG_COLORSPACE_INVALID)) == PNG_COLORSPACE_HAVE_ENDPOINTS)) + image->flags |= PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB; +#endif + } + + /* We need the maximum number of entries regardless of the format the + * application sets here. + */ + { + png_uint_32 cmap_entries; + + switch (png_ptr->color_type) + { + case PNG_COLOR_TYPE_GRAY: + cmap_entries = 1U << png_ptr->bit_depth; + break; + + case PNG_COLOR_TYPE_PALETTE: + cmap_entries = png_ptr->num_palette; + break; + + default: + cmap_entries = 256; + break; + } + + if (cmap_entries > 256) + cmap_entries = 256; + + image->colormap_entries = cmap_entries; + } + + return 1; +} + +#ifdef PNG_STDIO_SUPPORTED +int PNGAPI +png_image_begin_read_from_stdio(png_imagep image, FILE* file) +{ + if (image != NULL && image->version == PNG_IMAGE_VERSION) + { + if (file != NULL) + { + if (png_image_read_init(image)) + { + /* This is slightly evil, but png_init_io doesn't do anything other + * than this and we haven't changed the standard IO functions so + * this saves a 'safe' function. + */ + image->opaque->png_ptr->io_ptr = file; + return png_safe_execute(image, png_image_read_header, image); + } + } + + else + return png_image_error(image, + "png_image_begin_read_from_stdio: invalid argument"); + } + + else if (image != NULL) + return png_image_error(image, + "png_image_begin_read_from_stdio: incorrect PNG_IMAGE_VERSION"); + + return 0; +} + +int PNGAPI +png_image_begin_read_from_file(png_imagep image, const char *file_name) +{ + if (image != NULL && image->version == PNG_IMAGE_VERSION) + { + if (file_name != NULL) + { + FILE *fp = fopen(file_name, "rb"); + + if (fp != NULL) + { + if (png_image_read_init(image)) + { + image->opaque->png_ptr->io_ptr = fp; + image->opaque->owned_file = 1; + return png_safe_execute(image, png_image_read_header, image); + } + + /* Clean up: just the opened file. */ + (void)fclose(fp); + } + + else + return png_image_error(image, strerror(errno)); + } + + else + return png_image_error(image, + "png_image_begin_read_from_file: invalid argument"); + } + + else if (image != NULL) + return png_image_error(image, + "png_image_begin_read_from_file: incorrect PNG_IMAGE_VERSION"); + + return 0; +} +#endif /* PNG_STDIO_SUPPORTED */ + +static void PNGCBAPI +png_image_memory_read(png_structp png_ptr, png_bytep out, png_size_t need) +{ + if (png_ptr != NULL) + { + png_imagep image = png_voidcast(png_imagep, png_ptr->io_ptr); + if (image != NULL) + { + png_controlp cp = image->opaque; + if (cp != NULL) + { + png_const_bytep memory = cp->memory; + png_size_t size = cp->size; + + if (memory != NULL && size >= need) + { + memcpy(out, memory, need); + cp->memory = memory + need; + cp->size = size - need; + return; + } + + png_error(png_ptr, "read beyond end of data"); + } + } + + png_error(png_ptr, "invalid memory read"); + } +} + +int PNGAPI png_image_begin_read_from_memory(png_imagep image, + png_const_voidp memory, png_size_t size) +{ + if (image != NULL && image->version == PNG_IMAGE_VERSION) + { + if (memory != NULL && size > 0) + { + if (png_image_read_init(image)) + { + /* Now set the IO functions to read from the memory buffer and + * store it into io_ptr. Again do this in-place to avoid calling a + * libpng function that requires error handling. + */ + image->opaque->memory = png_voidcast(png_const_bytep, memory); + image->opaque->size = size; + image->opaque->png_ptr->io_ptr = image; + image->opaque->png_ptr->read_data_fn = png_image_memory_read; + + return png_safe_execute(image, png_image_read_header, image); + } + } + + else + return png_image_error(image, + "png_image_begin_read_from_memory: invalid argument"); + } + + else if (image != NULL) + return png_image_error(image, + "png_image_begin_read_from_memory: incorrect PNG_IMAGE_VERSION"); + + return 0; +} + +/* Utility function to skip chunks that are not used by the simplified image + * read functions and an appropriate macro to call it. + */ +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED +static void +png_image_skip_unused_chunks(png_structrp png_ptr) +{ + /* Prepare the reader to ignore all recognized chunks whose data will not + * be used, i.e., all chunks recognized by libpng except for those + * involved in basic image reading: + * + * IHDR, PLTE, IDAT, IEND + * + * Or image data handling: + * + * tRNS, bKGD, gAMA, cHRM, sRGB, iCCP and sBIT. + * + * This provides a small performance improvement and eliminates any + * potential vulnerability to security problems in the unused chunks. + */ + { + static PNG_CONST png_byte chunks_to_process[] = { + 98, 75, 71, 68, '\0', /* bKGD */ + 99, 72, 82, 77, '\0', /* cHRM */ + 103, 65, 77, 65, '\0', /* gAMA */ + 105, 67, 67, 80, '\0', /* iCCP */ + 115, 66, 73, 84, '\0', /* sBIT */ + 115, 82, 71, 66, '\0', /* sRGB */ + }; + + /* Ignore unknown chunks and all other chunks except for the + * IHDR, PLTE, tRNS, IDAT, and IEND chunks. + */ + png_set_keep_unknown_chunks(png_ptr, PNG_HANDLE_CHUNK_NEVER, + NULL, -1); + + /* But do not ignore image data handling chunks */ + png_set_keep_unknown_chunks(png_ptr, PNG_HANDLE_CHUNK_AS_DEFAULT, + chunks_to_process, (sizeof chunks_to_process)/5); + } +} + +# define PNG_SKIP_CHUNKS(p) png_image_skip_unused_chunks(p) +#else +# define PNG_SKIP_CHUNKS(p) ((void)0) +#endif /* PNG_HANDLE_AS_UNKNOWN_SUPPORTED */ + +/* The following macro gives the exact rounded answer for all values in the + * range 0..255 (it actually divides by 51.2, but the rounding still generates + * the correct numbers 0..5 + */ +#define PNG_DIV51(v8) (((v8) * 5 + 130) >> 8) + +/* Utility functions to make particular color-maps */ +static void +set_file_encoding(png_image_read_control *display) +{ + png_fixed_point g = display->image->opaque->png_ptr->colorspace.gamma; + if (png_gamma_significant(g)) + { + if (png_gamma_not_sRGB(g)) + { + display->file_encoding = E_FILE; + display->gamma_to_linear = png_reciprocal(g); + } + + else + display->file_encoding = E_sRGB; + } + + else + display->file_encoding = E_LINEAR8; +} + +static unsigned int +decode_gamma(png_image_read_control *display, png_uint_32 value, int encoding) +{ + if (encoding == E_FILE) /* double check */ + encoding = display->file_encoding; + + if (encoding == E_NOTSET) /* must be the file encoding */ + { + set_file_encoding(display); + encoding = display->file_encoding; + } + + switch (encoding) + { + case E_FILE: + value = png_gamma_16bit_correct(value*257, display->gamma_to_linear); + break; + + case E_sRGB: + value = png_sRGB_table[value]; + break; + + case E_LINEAR: + break; + + case E_LINEAR8: + value *= 257; + break; + + default: + png_error(display->image->opaque->png_ptr, + "unexpected encoding (internal error)"); + break; + } + + return value; +} + +static png_uint_32 +png_colormap_compose(png_image_read_control *display, + png_uint_32 foreground, int foreground_encoding, png_uint_32 alpha, + png_uint_32 background, int encoding) +{ + /* The file value is composed on the background, the background has the given + * encoding and so does the result, the file is encoded with E_FILE and the + * file and alpha are 8-bit values. The (output) encoding will always be + * E_LINEAR or E_sRGB. + */ + png_uint_32 f = decode_gamma(display, foreground, foreground_encoding); + png_uint_32 b = decode_gamma(display, background, encoding); + + /* The alpha is always an 8-bit value (it comes from the palette), the value + * scaled by 255 is what PNG_sRGB_FROM_LINEAR requires. + */ + f = f * alpha + b * (255-alpha); + + if (encoding == E_LINEAR) + { + /* Scale to 65535; divide by 255, approximately (in fact this is extremely + * accurate, it divides by 255.00000005937181414556, with no overflow.) + */ + f *= 257; /* Now scaled by 65535 */ + f += f >> 16; + f = (f+32768) >> 16; + } + + else /* E_sRGB */ + f = PNG_sRGB_FROM_LINEAR(f); + + return f; +} + +/* NOTE: E_LINEAR values to this routine must be 16-bit, but E_FILE values must + * be 8-bit. + */ +static void +png_create_colormap_entry(png_image_read_control *display, + png_uint_32 ip, png_uint_32 red, png_uint_32 green, png_uint_32 blue, + png_uint_32 alpha, int encoding) +{ + png_imagep image = display->image; + const int output_encoding = (image->format & PNG_FORMAT_FLAG_LINEAR) ? + E_LINEAR : E_sRGB; + const int convert_to_Y = (image->format & PNG_FORMAT_FLAG_COLOR) == 0 && + (red != green || green != blue); + + if (ip > 255) + png_error(image->opaque->png_ptr, "color-map index out of range"); + + /* Update the cache with whether the file gamma is significantly different + * from sRGB. + */ + if (encoding == E_FILE) + { + if (display->file_encoding == E_NOTSET) + set_file_encoding(display); + + /* Note that the cached value may be E_FILE too, but if it is then the + * gamma_to_linear member has been set. + */ + encoding = display->file_encoding; + } + + if (encoding == E_FILE) + { + png_fixed_point g = display->gamma_to_linear; + + red = png_gamma_16bit_correct(red*257, g); + green = png_gamma_16bit_correct(green*257, g); + blue = png_gamma_16bit_correct(blue*257, g); + + if (convert_to_Y || output_encoding == E_LINEAR) + { + alpha *= 257; + encoding = E_LINEAR; + } + + else + { + red = PNG_sRGB_FROM_LINEAR(red * 255); + green = PNG_sRGB_FROM_LINEAR(green * 255); + blue = PNG_sRGB_FROM_LINEAR(blue * 255); + encoding = E_sRGB; + } + } + + else if (encoding == E_LINEAR8) + { + /* This encoding occurs quite frequently in test cases because PngSuite + * includes a gAMA 1.0 chunk with most images. + */ + red *= 257; + green *= 257; + blue *= 257; + alpha *= 257; + encoding = E_LINEAR; + } + + else if (encoding == E_sRGB && (convert_to_Y || output_encoding == E_LINEAR)) + { + /* The values are 8-bit sRGB values, but must be converted to 16-bit + * linear. + */ + red = png_sRGB_table[red]; + green = png_sRGB_table[green]; + blue = png_sRGB_table[blue]; + alpha *= 257; + encoding = E_LINEAR; + } + + /* This is set if the color isn't gray but the output is. */ + if (encoding == E_LINEAR) + { + if (convert_to_Y) + { + /* NOTE: these values are copied from png_do_rgb_to_gray */ + png_uint_32 y = (png_uint_32)6968 * red + (png_uint_32)23434 * green + + (png_uint_32)2366 * blue; + + if (output_encoding == E_LINEAR) + y = (y + 16384) >> 15; + + else + { + /* y is scaled by 32768, we need it scaled by 255: */ + y = (y + 128) >> 8; + y *= 255; + y = PNG_sRGB_FROM_LINEAR((y + 64) >> 7); + encoding = E_sRGB; + } + + blue = red = green = y; + } + + else if (output_encoding == E_sRGB) + { + red = PNG_sRGB_FROM_LINEAR(red * 255); + green = PNG_sRGB_FROM_LINEAR(green * 255); + blue = PNG_sRGB_FROM_LINEAR(blue * 255); + alpha = PNG_DIV257(alpha); + encoding = E_sRGB; + } + } + + if (encoding != output_encoding) + png_error(image->opaque->png_ptr, "bad encoding (internal error)"); + + /* Store the value. */ + { +# ifdef PNG_FORMAT_BGR_SUPPORTED + const int afirst = (image->format & PNG_FORMAT_FLAG_AFIRST) != 0 && + (image->format & PNG_FORMAT_FLAG_ALPHA) != 0; +# else +# define afirst 0 +# endif +# ifdef PNG_FORMAT_BGR_SUPPORTED + const int bgr = (image->format & PNG_FORMAT_FLAG_BGR) ? 2 : 0; +# else +# define bgr 0 +# endif + + if (output_encoding == E_LINEAR) + { + png_uint_16p entry = png_voidcast(png_uint_16p, display->colormap); + + entry += ip * PNG_IMAGE_SAMPLE_CHANNELS(image->format); + + /* The linear 16-bit values must be pre-multiplied by the alpha channel + * value, if less than 65535 (this is, effectively, composite on black + * if the alpha channel is removed.) + */ + switch (PNG_IMAGE_SAMPLE_CHANNELS(image->format)) + { + case 4: + entry[afirst ? 0 : 3] = (png_uint_16)alpha; + /* FALL THROUGH */ + + case 3: + if (alpha < 65535) + { + if (alpha > 0) + { + blue = (blue * alpha + 32767U)/65535U; + green = (green * alpha + 32767U)/65535U; + red = (red * alpha + 32767U)/65535U; + } + + else + red = green = blue = 0; + } + entry[afirst + (2 ^ bgr)] = (png_uint_16)blue; + entry[afirst + 1] = (png_uint_16)green; + entry[afirst + bgr] = (png_uint_16)red; + break; + + case 2: + entry[1 ^ afirst] = (png_uint_16)alpha; + /* FALL THROUGH */ + + case 1: + if (alpha < 65535) + { + if (alpha > 0) + green = (green * alpha + 32767U)/65535U; + + else + green = 0; + } + entry[afirst] = (png_uint_16)green; + break; + + default: + break; + } + } + + else /* output encoding is E_sRGB */ + { + png_bytep entry = png_voidcast(png_bytep, display->colormap); + + entry += ip * PNG_IMAGE_SAMPLE_CHANNELS(image->format); + + switch (PNG_IMAGE_SAMPLE_CHANNELS(image->format)) + { + case 4: + entry[afirst ? 0 : 3] = (png_byte)alpha; + case 3: + entry[afirst + (2 ^ bgr)] = (png_byte)blue; + entry[afirst + 1] = (png_byte)green; + entry[afirst + bgr] = (png_byte)red; + break; + + case 2: + entry[1 ^ afirst] = (png_byte)alpha; + case 1: + entry[afirst] = (png_byte)green; + break; + + default: + break; + } + } + +# ifdef afirst +# undef afirst +# endif +# ifdef bgr +# undef bgr +# endif + } +} + +static int +make_gray_file_colormap(png_image_read_control *display) +{ + unsigned int i; + + for (i=0; i<256; ++i) + png_create_colormap_entry(display, i, i, i, i, 255, E_FILE); + + return i; +} + +static int +make_gray_colormap(png_image_read_control *display) +{ + unsigned int i; + + for (i=0; i<256; ++i) + png_create_colormap_entry(display, i, i, i, i, 255, E_sRGB); + + return i; +} +#define PNG_GRAY_COLORMAP_ENTRIES 256 + +static int +make_ga_colormap(png_image_read_control *display) +{ + unsigned int i, a; + + /* Alpha is retained, the output will be a color-map with entries + * selected by six levels of alpha. One transparent entry, 6 gray + * levels for all the intermediate alpha values, leaving 230 entries + * for the opaque grays. The color-map entries are the six values + * [0..5]*51, the GA processing uses PNG_DIV51(value) to find the + * relevant entry. + * + * if (alpha > 229) // opaque + * { + * // The 231 entries are selected to make the math below work: + * base = 0; + * entry = (231 * gray + 128) >> 8; + * } + * else if (alpha < 26) // transparent + * { + * base = 231; + * entry = 0; + * } + * else // partially opaque + * { + * base = 226 + 6 * PNG_DIV51(alpha); + * entry = PNG_DIV51(gray); + * } + */ + i = 0; + while (i < 231) + { + unsigned int gray = (i * 256 + 115) / 231; + png_create_colormap_entry(display, i++, gray, gray, gray, 255, E_sRGB); + } + + /* 255 is used here for the component values for consistency with the code + * that undoes premultiplication in pngwrite.c. + */ + png_create_colormap_entry(display, i++, 255, 255, 255, 0, E_sRGB); + + for (a=1; a<5; ++a) + { + unsigned int g; + + for (g=0; g<6; ++g) + png_create_colormap_entry(display, i++, g*51, g*51, g*51, a*51, + E_sRGB); + } + + return i; +} + +#define PNG_GA_COLORMAP_ENTRIES 256 + +static int +make_rgb_colormap(png_image_read_control *display) +{ + unsigned int i, r; + + /* Build a 6x6x6 opaque RGB cube */ + for (i=r=0; r<6; ++r) + { + unsigned int g; + + for (g=0; g<6; ++g) + { + unsigned int b; + + for (b=0; b<6; ++b) + png_create_colormap_entry(display, i++, r*51, g*51, b*51, 255, + E_sRGB); + } + } + + return i; +} + +#define PNG_RGB_COLORMAP_ENTRIES 216 + +/* Return a palette index to the above palette given three 8-bit sRGB values. */ +#define PNG_RGB_INDEX(r,g,b) \ + ((png_byte)(6 * (6 * PNG_DIV51(r) + PNG_DIV51(g)) + PNG_DIV51(b))) + +static int +png_image_read_colormap(png_voidp argument) +{ + png_image_read_control *display = + png_voidcast(png_image_read_control*, argument); + const png_imagep image = display->image; + + const png_structrp png_ptr = image->opaque->png_ptr; + const png_uint_32 output_format = image->format; + const int output_encoding = (output_format & PNG_FORMAT_FLAG_LINEAR) ? + E_LINEAR : E_sRGB; + + unsigned int cmap_entries; + unsigned int output_processing; /* Output processing option */ + unsigned int data_encoding = E_NOTSET; /* Encoding libpng must produce */ + + /* Background information; the background color and the index of this color + * in the color-map if it exists (else 256). + */ + unsigned int background_index = 256; + png_uint_32 back_r, back_g, back_b; + + /* Flags to accumulate things that need to be done to the input. */ + int expand_tRNS = 0; + + /* Exclude the NYI feature of compositing onto a color-mapped buffer; it is + * very difficult to do, the results look awful, and it is difficult to see + * what possible use it is because the application can't control the + * color-map. + */ + if (((png_ptr->color_type & PNG_COLOR_MASK_ALPHA) != 0 || + png_ptr->num_trans > 0) /* alpha in input */ && + ((output_format & PNG_FORMAT_FLAG_ALPHA) == 0) /* no alpha in output */) + { + if (output_encoding == E_LINEAR) /* compose on black */ + back_b = back_g = back_r = 0; + + else if (display->background == NULL /* no way to remove it */) + png_error(png_ptr, + "a background color must be supplied to remove alpha/transparency"); + + /* Get a copy of the background color (this avoids repeating the checks + * below.) The encoding is 8-bit sRGB or 16-bit linear, depending on the + * output format. + */ + else + { + back_g = display->background->green; + if (output_format & PNG_FORMAT_FLAG_COLOR) + { + back_r = display->background->red; + back_b = display->background->blue; + } + else + back_b = back_r = back_g; + } + } + + else if (output_encoding == E_LINEAR) + back_b = back_r = back_g = 65535; + + else + back_b = back_r = back_g = 255; + + /* Default the input file gamma if required - this is necessary because + * libpng assumes that if no gamma information is present the data is in the + * output format, but the simplified API deduces the gamma from the input + * format. + */ + if ((png_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_GAMMA) == 0) + { + /* Do this directly, not using the png_colorspace functions, to ensure + * that it happens even if the colorspace is invalid (though probably if + * it is the setting will be ignored) Note that the same thing can be + * achieved at the application interface with png_set_gAMA. + */ + if (png_ptr->bit_depth == 16 && + (image->flags & PNG_IMAGE_FLAG_16BIT_sRGB) == 0) + png_ptr->colorspace.gamma = PNG_GAMMA_LINEAR; + + else + png_ptr->colorspace.gamma = PNG_GAMMA_sRGB_INVERSE; + + png_ptr->colorspace.flags |= PNG_COLORSPACE_HAVE_GAMMA; + } + + /* Decide what to do based on the PNG color type of the input data. The + * utility function png_create_colormap_entry deals with most aspects of the + * output transformations; this code works out how to produce bytes of + * color-map entries from the original format. + */ + switch (png_ptr->color_type) + { + case PNG_COLOR_TYPE_GRAY: + if (png_ptr->bit_depth <= 8) + { + /* There at most 256 colors in the output, regardless of + * transparency. + */ + unsigned int step, i, val, trans = 256/*ignore*/, back_alpha = 0; + + cmap_entries = 1U << png_ptr->bit_depth; + if (cmap_entries > image->colormap_entries) + png_error(png_ptr, "gray[8] color-map: too few entries"); + + step = 255 / (cmap_entries - 1); + output_processing = PNG_CMAP_NONE; + + /* If there is a tRNS chunk then this either selects a transparent + * value or, if the output has no alpha, the background color. + */ + if (png_ptr->num_trans > 0) + { + trans = png_ptr->trans_color.gray; + + if ((output_format & PNG_FORMAT_FLAG_ALPHA) == 0) + back_alpha = output_encoding == E_LINEAR ? 65535 : 255; + } + + /* png_create_colormap_entry just takes an RGBA and writes the + * corresponding color-map entry using the format from 'image', + * including the required conversion to sRGB or linear as + * appropriate. The input values are always either sRGB (if the + * gamma correction flag is 0) or 0..255 scaled file encoded values + * (if the function must gamma correct them). + */ + for (i=val=0; ibit_depth < 8) + png_set_packing(png_ptr); + } + + else /* bit depth is 16 */ + { + /* The 16-bit input values can be converted directly to 8-bit gamma + * encoded values; however, if a tRNS chunk is present 257 color-map + * entries are required. This means that the extra entry requires + * special processing; add an alpha channel, sacrifice gray level + * 254 and convert transparent (alpha==0) entries to that. + * + * Use libpng to chop the data to 8 bits. Convert it to sRGB at the + * same time to minimize quality loss. If a tRNS chunk is present + * this means libpng must handle it too; otherwise it is impossible + * to do the exact match on the 16-bit value. + * + * If the output has no alpha channel *and* the background color is + * gray then it is possible to let libpng handle the substitution by + * ensuring that the corresponding gray level matches the background + * color exactly. + */ + data_encoding = E_sRGB; + + if (PNG_GRAY_COLORMAP_ENTRIES > image->colormap_entries) + png_error(png_ptr, "gray[16] color-map: too few entries"); + + cmap_entries = make_gray_colormap(display); + + if (png_ptr->num_trans > 0) + { + unsigned int back_alpha; + + if (output_format & PNG_FORMAT_FLAG_ALPHA) + back_alpha = 0; + + else + { + if (back_r == back_g && back_g == back_b) + { + /* Background is gray; no special processing will be + * required. + */ + png_color_16 c; + png_uint_32 gray = back_g; + + if (output_encoding == E_LINEAR) + { + gray = PNG_sRGB_FROM_LINEAR(gray * 255); + + /* And make sure the corresponding palette entry + * matches. + */ + png_create_colormap_entry(display, gray, back_g, back_g, + back_g, 65535, E_LINEAR); + } + + /* The background passed to libpng, however, must be the + * sRGB value. + */ + c.index = 0; /*unused*/ + c.gray = c.red = c.green = c.blue = (png_uint_16)gray; + + /* NOTE: does this work without expanding tRNS to alpha? + * It should be the color->gray case below apparently + * doesn't. + */ + png_set_background_fixed(png_ptr, &c, + PNG_BACKGROUND_GAMMA_SCREEN, 0/*need_expand*/, + 0/*gamma: not used*/); + + output_processing = PNG_CMAP_NONE; + break; + } + + back_alpha = output_encoding == E_LINEAR ? 65535 : 255; + } + + /* output_processing means that the libpng-processed row will be + * 8-bit GA and it has to be processing to single byte color-map + * values. Entry 254 is replaced by either a completely + * transparent entry or by the background color at full + * precision (and the background color is not a simple gray leve + * in this case.) + */ + expand_tRNS = 1; + output_processing = PNG_CMAP_TRANS; + background_index = 254; + + /* And set (overwrite) color-map entry 254 to the actual + * background color at full precision. + */ + png_create_colormap_entry(display, 254, back_r, back_g, back_b, + back_alpha, output_encoding); + } + + else + output_processing = PNG_CMAP_NONE; + } + break; + + case PNG_COLOR_TYPE_GRAY_ALPHA: + /* 8-bit or 16-bit PNG with two channels - gray and alpha. A minimum + * of 65536 combinations. If, however, the alpha channel is to be + * removed there are only 256 possibilities if the background is gray. + * (Otherwise there is a subset of the 65536 possibilities defined by + * the triangle between black, white and the background color.) + * + * Reduce 16-bit files to 8-bit and sRGB encode the result. No need to + * worry about tRNS matching - tRNS is ignored if there is an alpha + * channel. + */ + data_encoding = E_sRGB; + + if (output_format & PNG_FORMAT_FLAG_ALPHA) + { + if (PNG_GA_COLORMAP_ENTRIES > image->colormap_entries) + png_error(png_ptr, "gray+alpha color-map: too few entries"); + + cmap_entries = make_ga_colormap(display); + + background_index = PNG_CMAP_GA_BACKGROUND; + output_processing = PNG_CMAP_GA; + } + + else /* alpha is removed */ + { + /* Alpha must be removed as the PNG data is processed when the + * background is a color because the G and A channels are + * independent and the vector addition (non-parallel vectors) is a + * 2-D problem. + * + * This can be reduced to the same algorithm as above by making a + * colormap containing gray levels (for the opaque grays), a + * background entry (for a transparent pixel) and a set of four six + * level color values, one set for each intermediate alpha value. + * See the comments in make_ga_colormap for how this works in the + * per-pixel processing. + * + * If the background is gray, however, we only need a 256 entry gray + * level color map. It is sufficient to make the entry generated + * for the background color be exactly the color specified. + */ + if ((output_format & PNG_FORMAT_FLAG_COLOR) == 0 || + (back_r == back_g && back_g == back_b)) + { + /* Background is gray; no special processing will be required. */ + png_color_16 c; + png_uint_32 gray = back_g; + + if (PNG_GRAY_COLORMAP_ENTRIES > image->colormap_entries) + png_error(png_ptr, "gray-alpha color-map: too few entries"); + + cmap_entries = make_gray_colormap(display); + + if (output_encoding == E_LINEAR) + { + gray = PNG_sRGB_FROM_LINEAR(gray * 255); + + /* And make sure the corresponding palette entry matches. */ + png_create_colormap_entry(display, gray, back_g, back_g, + back_g, 65535, E_LINEAR); + } + + /* The background passed to libpng, however, must be the sRGB + * value. + */ + c.index = 0; /*unused*/ + c.gray = c.red = c.green = c.blue = (png_uint_16)gray; + + png_set_background_fixed(png_ptr, &c, + PNG_BACKGROUND_GAMMA_SCREEN, 0/*need_expand*/, + 0/*gamma: not used*/); + + output_processing = PNG_CMAP_NONE; + } + + else + { + png_uint_32 i, a; + + /* This is the same as png_make_ga_colormap, above, except that + * the entries are all opaque. + */ + if (PNG_GA_COLORMAP_ENTRIES > image->colormap_entries) + png_error(png_ptr, "ga-alpha color-map: too few entries"); + + i = 0; + while (i < 231) + { + png_uint_32 gray = (i * 256 + 115) / 231; + png_create_colormap_entry(display, i++, gray, gray, gray, + 255, E_sRGB); + } + + /* NOTE: this preserves the full precision of the application + * background color. + */ + background_index = i; + png_create_colormap_entry(display, i++, back_r, back_g, back_b, + output_encoding == E_LINEAR ? 65535U : 255U, output_encoding); + + /* For non-opaque input composite on the sRGB background - this + * requires inverting the encoding for each component. The input + * is still converted to the sRGB encoding because this is a + * reasonable approximate to the logarithmic curve of human + * visual sensitivity, at least over the narrow range which PNG + * represents. Consequently 'G' is always sRGB encoded, while + * 'A' is linear. We need the linear background colors. + */ + if (output_encoding == E_sRGB) /* else already linear */ + { + /* This may produce a value not exactly matching the + * background, but that's ok because these numbers are only + * used when alpha != 0 + */ + back_r = png_sRGB_table[back_r]; + back_g = png_sRGB_table[back_g]; + back_b = png_sRGB_table[back_b]; + } + + for (a=1; a<5; ++a) + { + unsigned int g; + + /* PNG_sRGB_FROM_LINEAR expects a 16-bit linear value scaled + * by an 8-bit alpha value (0..255). + */ + png_uint_32 alpha = 51 * a; + png_uint_32 back_rx = (255-alpha) * back_r; + png_uint_32 back_gx = (255-alpha) * back_g; + png_uint_32 back_bx = (255-alpha) * back_b; + + for (g=0; g<6; ++g) + { + png_uint_32 gray = png_sRGB_table[g*51] * alpha; + + png_create_colormap_entry(display, i++, + PNG_sRGB_FROM_LINEAR(gray + back_rx), + PNG_sRGB_FROM_LINEAR(gray + back_gx), + PNG_sRGB_FROM_LINEAR(gray + back_bx), 255, E_sRGB); + } + } + + cmap_entries = i; + output_processing = PNG_CMAP_GA; + } + } + break; + + case PNG_COLOR_TYPE_RGB: + case PNG_COLOR_TYPE_RGB_ALPHA: + /* Exclude the case where the output is gray; we can always handle this + * with the cases above. + */ + if ((output_format & PNG_FORMAT_FLAG_COLOR) == 0) + { + /* The color-map will be grayscale, so we may as well convert the + * input RGB values to a simple grayscale and use the grayscale + * code above. + * + * NOTE: calling this apparently damages the recognition of the + * transparent color in background color handling; call + * png_set_tRNS_to_alpha before png_set_background_fixed. + */ + png_set_rgb_to_gray_fixed(png_ptr, PNG_ERROR_ACTION_NONE, -1, + -1); + data_encoding = E_sRGB; + + /* The output will now be one or two 8-bit gray or gray+alpha + * channels. The more complex case arises when the input has alpha. + */ + if ((png_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA || + png_ptr->num_trans > 0) && + (output_format & PNG_FORMAT_FLAG_ALPHA) != 0) + { + /* Both input and output have an alpha channel, so no background + * processing is required; just map the GA bytes to the right + * color-map entry. + */ + expand_tRNS = 1; + + if (PNG_GA_COLORMAP_ENTRIES > image->colormap_entries) + png_error(png_ptr, "rgb[ga] color-map: too few entries"); + + cmap_entries = make_ga_colormap(display); + background_index = PNG_CMAP_GA_BACKGROUND; + output_processing = PNG_CMAP_GA; + } + + else + { + /* Either the input or the output has no alpha channel, so there + * will be no non-opaque pixels in the color-map; it will just be + * grayscale. + */ + if (PNG_GRAY_COLORMAP_ENTRIES > image->colormap_entries) + png_error(png_ptr, "rgb[gray] color-map: too few entries"); + + /* Ideally this code would use libpng to do the gamma correction, + * but if an input alpha channel is to be removed we will hit the + * libpng bug in gamma+compose+rgb-to-gray (the double gamma + * correction bug). Fix this by dropping the gamma correction in + * this case and doing it in the palette; this will result in + * duplicate palette entries, but that's better than the + * alternative of double gamma correction. + */ + if ((png_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA || + png_ptr->num_trans > 0) && + png_gamma_not_sRGB(png_ptr->colorspace.gamma)) + { + cmap_entries = make_gray_file_colormap(display); + data_encoding = E_FILE; + } + + else + cmap_entries = make_gray_colormap(display); + + /* But if the input has alpha or transparency it must be removed + */ + if (png_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA || + png_ptr->num_trans > 0) + { + png_color_16 c; + png_uint_32 gray = back_g; + + /* We need to ensure that the application background exists in + * the colormap and that completely transparent pixels map to + * it. Achieve this simply by ensuring that the entry + * selected for the background really is the background color. + */ + if (data_encoding == E_FILE) /* from the fixup above */ + { + /* The app supplied a gray which is in output_encoding, we + * need to convert it to a value of the input (E_FILE) + * encoding then set this palette entry to the required + * output encoding. + */ + if (output_encoding == E_sRGB) + gray = png_sRGB_table[gray]; /* now E_LINEAR */ + + gray = PNG_DIV257(png_gamma_16bit_correct(gray, + png_ptr->colorspace.gamma)); /* now E_FILE */ + + /* And make sure the corresponding palette entry contains + * exactly the required sRGB value. + */ + png_create_colormap_entry(display, gray, back_g, back_g, + back_g, 0/*unused*/, output_encoding); + } + + else if (output_encoding == E_LINEAR) + { + gray = PNG_sRGB_FROM_LINEAR(gray * 255); + + /* And make sure the corresponding palette entry matches. + */ + png_create_colormap_entry(display, gray, back_g, back_g, + back_g, 0/*unused*/, E_LINEAR); + } + + /* The background passed to libpng, however, must be the + * output (normally sRGB) value. + */ + c.index = 0; /*unused*/ + c.gray = c.red = c.green = c.blue = (png_uint_16)gray; + + /* NOTE: the following is apparently a bug in libpng. Without + * it the transparent color recognition in + * png_set_background_fixed seems to go wrong. + */ + expand_tRNS = 1; + png_set_background_fixed(png_ptr, &c, + PNG_BACKGROUND_GAMMA_SCREEN, 0/*need_expand*/, + 0/*gamma: not used*/); + } + + output_processing = PNG_CMAP_NONE; + } + } + + else /* output is color */ + { + /* We could use png_quantize here so long as there is no transparent + * color or alpha; png_quantize ignores alpha. Easier overall just + * to do it once and using PNG_DIV51 on the 6x6x6 reduced RGB cube. + * Consequently we always want libpng to produce sRGB data. + */ + data_encoding = E_sRGB; + + /* Is there any transparency or alpha? */ + if (png_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA || + png_ptr->num_trans > 0) + { + /* Is there alpha in the output too? If so all four channels are + * processed into a special RGB cube with alpha support. + */ + if (output_format & PNG_FORMAT_FLAG_ALPHA) + { + png_uint_32 r; + + if (PNG_RGB_COLORMAP_ENTRIES+1+27 > image->colormap_entries) + png_error(png_ptr, "rgb+alpha color-map: too few entries"); + + cmap_entries = make_rgb_colormap(display); + + /* Add a transparent entry. */ + png_create_colormap_entry(display, cmap_entries, 255, 255, + 255, 0, E_sRGB); + + /* This is stored as the background index for the processing + * algorithm. + */ + background_index = cmap_entries++; + + /* Add 27 r,g,b entries each with alpha 0.5. */ + for (r=0; r<256; r = (r << 1) | 0x7f) + { + png_uint_32 g; + + for (g=0; g<256; g = (g << 1) | 0x7f) + { + png_uint_32 b; + + /* This generates components with the values 0, 127 and + * 255 + */ + for (b=0; b<256; b = (b << 1) | 0x7f) + png_create_colormap_entry(display, cmap_entries++, + r, g, b, 128, E_sRGB); + } + } + + expand_tRNS = 1; + output_processing = PNG_CMAP_RGB_ALPHA; + } + + else + { + /* Alpha/transparency must be removed. The background must + * exist in the color map (achieved by setting adding it after + * the 666 color-map). If the standard processing code will + * pick up this entry automatically that's all that is + * required; libpng can be called to do the background + * processing. + */ + unsigned int sample_size = + PNG_IMAGE_SAMPLE_SIZE(output_format); + png_uint_32 r, g, b; /* sRGB background */ + + if (PNG_RGB_COLORMAP_ENTRIES+1+27 > image->colormap_entries) + png_error(png_ptr, "rgb-alpha color-map: too few entries"); + + cmap_entries = make_rgb_colormap(display); + + png_create_colormap_entry(display, cmap_entries, back_r, + back_g, back_b, 0/*unused*/, output_encoding); + + if (output_encoding == E_LINEAR) + { + r = PNG_sRGB_FROM_LINEAR(back_r * 255); + g = PNG_sRGB_FROM_LINEAR(back_g * 255); + b = PNG_sRGB_FROM_LINEAR(back_b * 255); + } + + else + { + r = back_r; + g = back_g; + b = back_g; + } + + /* Compare the newly-created color-map entry with the one the + * PNG_CMAP_RGB algorithm will use. If the two entries don't + * match, add the new one and set this as the background + * index. + */ + if (memcmp((png_const_bytep)display->colormap + + sample_size * cmap_entries, + (png_const_bytep)display->colormap + + sample_size * PNG_RGB_INDEX(r,g,b), + sample_size) != 0) + { + /* The background color must be added. */ + background_index = cmap_entries++; + + /* Add 27 r,g,b entries each with created by composing with + * the background at alpha 0.5. + */ + for (r=0; r<256; r = (r << 1) | 0x7f) + { + for (g=0; g<256; g = (g << 1) | 0x7f) + { + /* This generates components with the values 0, 127 + * and 255 + */ + for (b=0; b<256; b = (b << 1) | 0x7f) + png_create_colormap_entry(display, cmap_entries++, + png_colormap_compose(display, r, E_sRGB, 128, + back_r, output_encoding), + png_colormap_compose(display, g, E_sRGB, 128, + back_g, output_encoding), + png_colormap_compose(display, b, E_sRGB, 128, + back_b, output_encoding), + 0/*unused*/, output_encoding); + } + } + + expand_tRNS = 1; + output_processing = PNG_CMAP_RGB_ALPHA; + } + + else /* background color is in the standard color-map */ + { + png_color_16 c; + + c.index = 0; /*unused*/ + c.red = (png_uint_16)back_r; + c.gray = c.green = (png_uint_16)back_g; + c.blue = (png_uint_16)back_b; + + png_set_background_fixed(png_ptr, &c, + PNG_BACKGROUND_GAMMA_SCREEN, 0/*need_expand*/, + 0/*gamma: not used*/); + + output_processing = PNG_CMAP_RGB; + } + } + } + + else /* no alpha or transparency in the input */ + { + /* Alpha in the output is irrelevant, simply map the opaque input + * pixels to the 6x6x6 color-map. + */ + if (PNG_RGB_COLORMAP_ENTRIES > image->colormap_entries) + png_error(png_ptr, "rgb color-map: too few entries"); + + cmap_entries = make_rgb_colormap(display); + output_processing = PNG_CMAP_RGB; + } + } + break; + + case PNG_COLOR_TYPE_PALETTE: + /* It's already got a color-map. It may be necessary to eliminate the + * tRNS entries though. + */ + { + unsigned int num_trans = png_ptr->num_trans; + png_const_bytep trans = num_trans > 0 ? png_ptr->trans_alpha : NULL; + png_const_colorp colormap = png_ptr->palette; + const int do_background = trans != NULL && + (output_format & PNG_FORMAT_FLAG_ALPHA) == 0; + unsigned int i; + + /* Just in case: */ + if (trans == NULL) + num_trans = 0; + + output_processing = PNG_CMAP_NONE; + data_encoding = E_FILE; /* Don't change from color-map indicies */ + cmap_entries = png_ptr->num_palette; + if (cmap_entries > 256) + cmap_entries = 256; + + if (cmap_entries > image->colormap_entries) + png_error(png_ptr, "palette color-map: too few entries"); + + for (i=0; i < cmap_entries; ++i) + { + if (do_background && i < num_trans && trans[i] < 255) + { + if (trans[i] == 0) + png_create_colormap_entry(display, i, back_r, back_g, + back_b, 0, output_encoding); + + else + { + /* Must compose the PNG file color in the color-map entry + * on the sRGB color in 'back'. + */ + png_create_colormap_entry(display, i, + png_colormap_compose(display, colormap[i].red, E_FILE, + trans[i], back_r, output_encoding), + png_colormap_compose(display, colormap[i].green, E_FILE, + trans[i], back_g, output_encoding), + png_colormap_compose(display, colormap[i].blue, E_FILE, + trans[i], back_b, output_encoding), + output_encoding == E_LINEAR ? trans[i] * 257U : + trans[i], + output_encoding); + } + } + + else + png_create_colormap_entry(display, i, colormap[i].red, + colormap[i].green, colormap[i].blue, + i < num_trans ? trans[i] : 255U, E_FILE/*8-bit*/); + } + + /* The PNG data may have indicies packed in fewer than 8 bits, it + * must be expanded if so. + */ + if (png_ptr->bit_depth < 8) + png_set_packing(png_ptr); + } + break; + + default: + png_error(png_ptr, "invalid PNG color type"); + /*NOT REACHED*/ + break; + } + + /* Now deal with the output processing */ + if (expand_tRNS && png_ptr->num_trans > 0 && + (png_ptr->color_type & PNG_COLOR_MASK_ALPHA) == 0) + png_set_tRNS_to_alpha(png_ptr); + + switch (data_encoding) + { + default: + png_error(png_ptr, "bad data option (internal error)"); + break; + + case E_sRGB: + /* Change to 8-bit sRGB */ + png_set_alpha_mode_fixed(png_ptr, PNG_ALPHA_PNG, PNG_GAMMA_sRGB); + /* FALL THROUGH */ + + case E_FILE: + if (png_ptr->bit_depth > 8) + png_set_scale_16(png_ptr); + break; + } + + if (cmap_entries > 256 || cmap_entries > image->colormap_entries) + png_error(png_ptr, "color map overflow (BAD internal error)"); + + image->colormap_entries = cmap_entries; + + /* Double check using the recorded background index */ + switch (output_processing) + { + case PNG_CMAP_NONE: + if (background_index != PNG_CMAP_NONE_BACKGROUND) + goto bad_background; + break; + + case PNG_CMAP_GA: + if (background_index != PNG_CMAP_GA_BACKGROUND) + goto bad_background; + break; + + case PNG_CMAP_TRANS: + if (background_index >= cmap_entries || + background_index != PNG_CMAP_TRANS_BACKGROUND) + goto bad_background; + break; + + case PNG_CMAP_RGB: + if (background_index != PNG_CMAP_RGB_BACKGROUND) + goto bad_background; + break; + + case PNG_CMAP_RGB_ALPHA: + if (background_index != PNG_CMAP_RGB_ALPHA_BACKGROUND) + goto bad_background; + break; + + default: + png_error(png_ptr, "bad processing option (internal error)"); + + bad_background: + png_error(png_ptr, "bad background index (internal error)"); + } + + display->colormap_processing = output_processing; + + return 1/*ok*/; +} + +/* The final part of the color-map read called from png_image_finish_read. */ +static int +png_image_read_and_map(png_voidp argument) +{ + png_image_read_control *display = png_voidcast(png_image_read_control*, + argument); + png_imagep image = display->image; + png_structrp png_ptr = image->opaque->png_ptr; + int passes; + + /* Called when the libpng data must be transformed into the color-mapped + * form. There is a local row buffer in display->local and this routine must + * do the interlace handling. + */ + switch (png_ptr->interlaced) + { + case PNG_INTERLACE_NONE: + passes = 1; + break; + + case PNG_INTERLACE_ADAM7: + passes = PNG_INTERLACE_ADAM7_PASSES; + break; + + default: + passes = 0; + png_error(png_ptr, "unknown interlace type"); + } + + { + png_uint_32 height = image->height; + png_uint_32 width = image->width; + int proc = display->colormap_processing; + png_bytep first_row = png_voidcast(png_bytep, display->first_row); + ptrdiff_t step_row = display->row_bytes; + int pass; + + for (pass = 0; pass < passes; ++pass) + { + unsigned int startx, stepx, stepy; + png_uint_32 y; + + if (png_ptr->interlaced == PNG_INTERLACE_ADAM7) + { + /* The row may be empty for a short image: */ + if (PNG_PASS_COLS(width, pass) == 0) + continue; + + startx = PNG_PASS_START_COL(pass); + stepx = PNG_PASS_COL_OFFSET(pass); + y = PNG_PASS_START_ROW(pass); + stepy = PNG_PASS_ROW_OFFSET(pass); + } + + else + { + y = 0; + startx = 0; + stepx = stepy = 1; + } + + for (; ylocal_row); + png_bytep outrow = first_row + y * step_row; + png_const_bytep end_row = outrow + width; + + /* Read read the libpng data into the temporary buffer. */ + png_read_row(png_ptr, inrow, NULL); + + /* Now process the row according to the processing option, note + * that the caller verifies that the format of the libpng output + * data is as required. + */ + outrow += startx; + switch (proc) + { + case PNG_CMAP_GA: + for (; outrow < end_row; outrow += stepx) + { + /* The data is always in the PNG order */ + unsigned int gray = *inrow++; + unsigned int alpha = *inrow++; + unsigned int entry; + + /* NOTE: this code is copied as a comment in + * make_ga_colormap above. Please update the + * comment if you change this code! + */ + if (alpha > 229) /* opaque */ + { + entry = (231 * gray + 128) >> 8; + } + else if (alpha < 26) /* transparent */ + { + entry = 231; + } + else /* partially opaque */ + { + entry = 226 + 6 * PNG_DIV51(alpha) + PNG_DIV51(gray); + } + + *outrow = (png_byte)entry; + } + break; + + case PNG_CMAP_TRANS: + for (; outrow < end_row; outrow += stepx) + { + png_byte gray = *inrow++; + png_byte alpha = *inrow++; + + if (alpha == 0) + *outrow = PNG_CMAP_TRANS_BACKGROUND; + + else if (gray != PNG_CMAP_TRANS_BACKGROUND) + *outrow = gray; + + else + *outrow = (png_byte)(PNG_CMAP_TRANS_BACKGROUND+1); + } + break; + + case PNG_CMAP_RGB: + for (; outrow < end_row; outrow += stepx) + { + *outrow = PNG_RGB_INDEX(inrow[0], inrow[1], inrow[2]); + inrow += 3; + } + break; + + case PNG_CMAP_RGB_ALPHA: + for (; outrow < end_row; outrow += stepx) + { + unsigned int alpha = inrow[3]; + + /* Because the alpha entries only hold alpha==0.5 values + * split the processing at alpha==0.25 (64) and 0.75 + * (196). + */ + + if (alpha >= 196) + *outrow = PNG_RGB_INDEX(inrow[0], inrow[1], + inrow[2]); + + else if (alpha < 64) + *outrow = PNG_CMAP_RGB_ALPHA_BACKGROUND; + + else + { + /* Likewise there are three entries for each of r, g + * and b. We could select the entry by popcount on + * the top two bits on those architectures that + * support it, this is what the code below does, + * crudely. + */ + unsigned int back_i = PNG_CMAP_RGB_ALPHA_BACKGROUND+1; + + /* Here are how the values map: + * + * 0x00 .. 0x3f -> 0 + * 0x40 .. 0xbf -> 1 + * 0xc0 .. 0xff -> 2 + * + * So, as above with the explicit alpha checks, the + * breakpoints are at 64 and 196. + */ + if (inrow[0] & 0x80) back_i += 9; /* red */ + if (inrow[0] & 0x40) back_i += 9; + if (inrow[0] & 0x80) back_i += 3; /* green */ + if (inrow[0] & 0x40) back_i += 3; + if (inrow[0] & 0x80) back_i += 1; /* blue */ + if (inrow[0] & 0x40) back_i += 1; + + *outrow = (png_byte)back_i; + } + + inrow += 4; + } + break; + + default: + break; + } + } + } + } + + return 1; +} + +static int +png_image_read_colormapped(png_voidp argument) +{ + png_image_read_control *display = png_voidcast(png_image_read_control*, + argument); + png_imagep image = display->image; + png_controlp control = image->opaque; + png_structrp png_ptr = control->png_ptr; + png_inforp info_ptr = control->info_ptr; + + int passes = 0; /* As a flag */ + + PNG_SKIP_CHUNKS(png_ptr); + + /* Update the 'info' structure and make sure the result is as required; first + * make sure to turn on the interlace handling if it will be required + * (because it can't be turned on *after* the call to png_read_update_info!) + */ + if (display->colormap_processing == PNG_CMAP_NONE) + passes = png_set_interlace_handling(png_ptr); + + png_read_update_info(png_ptr, info_ptr); + + /* The expected output can be deduced from the colormap_processing option. */ + switch (display->colormap_processing) + { + case PNG_CMAP_NONE: + /* Output must be one channel and one byte per pixel, the output + * encoding can be anything. + */ + if ((info_ptr->color_type == PNG_COLOR_TYPE_PALETTE || + info_ptr->color_type == PNG_COLOR_TYPE_GRAY) && + info_ptr->bit_depth == 8) + break; + + goto bad_output; + + case PNG_CMAP_TRANS: + case PNG_CMAP_GA: + /* Output must be two channels and the 'G' one must be sRGB, the latter + * can be checked with an exact number because it should have been set + * to this number above! + */ + if (info_ptr->color_type == PNG_COLOR_TYPE_GRAY_ALPHA && + info_ptr->bit_depth == 8 && + png_ptr->screen_gamma == PNG_GAMMA_sRGB && + image->colormap_entries == 256) + break; + + goto bad_output; + + case PNG_CMAP_RGB: + /* Output must be 8-bit sRGB encoded RGB */ + if (info_ptr->color_type == PNG_COLOR_TYPE_RGB && + info_ptr->bit_depth == 8 && + png_ptr->screen_gamma == PNG_GAMMA_sRGB && + image->colormap_entries == 216) + break; + + goto bad_output; + + case PNG_CMAP_RGB_ALPHA: + /* Output must be 8-bit sRGB encoded RGBA */ + if (info_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA && + info_ptr->bit_depth == 8 && + png_ptr->screen_gamma == PNG_GAMMA_sRGB && + image->colormap_entries == 244 /* 216 + 1 + 27 */) + break; + + /* goto bad_output; */ + /* FALL THROUGH */ + + default: + bad_output: + png_error(png_ptr, "bad color-map processing (internal error)"); + } + + /* Now read the rows. Do this here if it is possible to read directly into + * the output buffer, otherwise allocate a local row buffer of the maximum + * size libpng requires and call the relevant processing routine safely. + */ + { + png_voidp first_row = display->buffer; + ptrdiff_t row_bytes = display->row_stride; + + /* The following expression is designed to work correctly whether it gives + * a signed or an unsigned result. + */ + if (row_bytes < 0) + { + char *ptr = png_voidcast(char*, first_row); + ptr += (image->height-1) * (-row_bytes); + first_row = png_voidcast(png_voidp, ptr); + } + + display->first_row = first_row; + display->row_bytes = row_bytes; + } + + if (passes == 0) + { + int result; + png_voidp row = png_malloc(png_ptr, png_get_rowbytes(png_ptr, info_ptr)); + + display->local_row = row; + result = png_safe_execute(image, png_image_read_and_map, display); + display->local_row = NULL; + png_free(png_ptr, row); + + return result; + } + + else + { + png_alloc_size_t row_bytes = display->row_bytes; + + while (--passes >= 0) + { + png_uint_32 y = image->height; + png_bytep row = png_voidcast(png_bytep, display->first_row); + + while (y-- > 0) + { + png_read_row(png_ptr, row, NULL); + row += row_bytes; + } + } + + return 1; + } +} + +/* Just the row reading part of png_image_read. */ +static int +png_image_read_composite(png_voidp argument) +{ + png_image_read_control *display = png_voidcast(png_image_read_control*, + argument); + png_imagep image = display->image; + png_structrp png_ptr = image->opaque->png_ptr; + int passes; + + switch (png_ptr->interlaced) + { + case PNG_INTERLACE_NONE: + passes = 1; + break; + + case PNG_INTERLACE_ADAM7: + passes = PNG_INTERLACE_ADAM7_PASSES; + break; + + default: + passes = 0; + png_error(png_ptr, "unknown interlace type"); + } + + { + png_uint_32 height = image->height; + png_uint_32 width = image->width; + ptrdiff_t step_row = display->row_bytes; + unsigned int channels = (image->format & PNG_FORMAT_FLAG_COLOR) ? 3 : 1; + int pass; + + for (pass = 0; pass < passes; ++pass) + { + unsigned int startx, stepx, stepy; + png_uint_32 y; + + if (png_ptr->interlaced == PNG_INTERLACE_ADAM7) + { + /* The row may be empty for a short image: */ + if (PNG_PASS_COLS(width, pass) == 0) + continue; + + startx = PNG_PASS_START_COL(pass) * channels; + stepx = PNG_PASS_COL_OFFSET(pass) * channels; + y = PNG_PASS_START_ROW(pass); + stepy = PNG_PASS_ROW_OFFSET(pass); + } + + else + { + y = 0; + startx = 0; + stepx = channels; + stepy = 1; + } + + for (; ylocal_row); + png_bytep outrow; + png_const_bytep end_row; + + /* Read the row, which is packed: */ + png_read_row(png_ptr, inrow, NULL); + + outrow = png_voidcast(png_bytep, display->first_row); + outrow += y * step_row; + end_row = outrow + width * channels; + + /* Now do the composition on each pixel in this row. */ + outrow += startx; + for (; outrow < end_row; outrow += stepx) + { + png_byte alpha = inrow[channels]; + + if (alpha > 0) /* else no change to the output */ + { + unsigned int c; + + for (c=0; cimage; + png_structrp png_ptr = image->opaque->png_ptr; + png_inforp info_ptr = image->opaque->info_ptr; + png_uint_32 height = image->height; + png_uint_32 width = image->width; + int pass, passes; + + /* Double check the convoluted logic below. We expect to get here with + * libpng doing rgb to gray and gamma correction but background processing + * left to the png_image_read_background function. The rows libpng produce + * might be 8 or 16-bit but should always have two channels; gray plus alpha. + */ + if ((png_ptr->transformations & PNG_RGB_TO_GRAY) == 0) + png_error(png_ptr, "lost rgb to gray"); + + if ((png_ptr->transformations & PNG_COMPOSE) != 0) + png_error(png_ptr, "unexpected compose"); + + if (png_get_channels(png_ptr, info_ptr) != 2) + png_error(png_ptr, "lost/gained channels"); + + /* Expect the 8-bit case to always remove the alpha channel */ + if ((image->format & PNG_FORMAT_FLAG_LINEAR) == 0 && + (image->format & PNG_FORMAT_FLAG_ALPHA) != 0) + png_error(png_ptr, "unexpected 8-bit transformation"); + + switch (png_ptr->interlaced) + { + case PNG_INTERLACE_NONE: + passes = 1; + break; + + case PNG_INTERLACE_ADAM7: + passes = PNG_INTERLACE_ADAM7_PASSES; + break; + + default: + passes = 0; + png_error(png_ptr, "unknown interlace type"); + } + + switch (png_get_bit_depth(png_ptr, info_ptr)) + { + default: + png_error(png_ptr, "unexpected bit depth"); + break; + + case 8: + /* 8-bit sRGB gray values with an alpha channel; the alpha channel is + * to be removed by composing on a backgroundi: either the row if + * display->background is NULL or display->background->green if not. + * Unlike the code above ALPHA_OPTIMIZED has *not* been done. + */ + { + png_bytep first_row = png_voidcast(png_bytep, display->first_row); + ptrdiff_t step_row = display->row_bytes; + + for (pass = 0; pass < passes; ++pass) + { + png_bytep row = png_voidcast(png_bytep, + display->first_row); + unsigned int startx, stepx, stepy; + png_uint_32 y; + + if (png_ptr->interlaced == PNG_INTERLACE_ADAM7) + { + /* The row may be empty for a short image: */ + if (PNG_PASS_COLS(width, pass) == 0) + continue; + + startx = PNG_PASS_START_COL(pass); + stepx = PNG_PASS_COL_OFFSET(pass); + y = PNG_PASS_START_ROW(pass); + stepy = PNG_PASS_ROW_OFFSET(pass); + } + + else + { + y = 0; + startx = 0; + stepx = stepy = 1; + } + + if (display->background == NULL) + { + for (; ylocal_row); + png_bytep outrow = first_row + y * step_row; + png_const_bytep end_row = outrow + width; + + /* Read the row, which is packed: */ + png_read_row(png_ptr, inrow, NULL); + + /* Now do the composition on each pixel in this row. */ + outrow += startx; + for (; outrow < end_row; outrow += stepx) + { + png_byte alpha = inrow[1]; + + if (alpha > 0) /* else no change to the output */ + { + png_uint_32 component = inrow[0]; + + if (alpha < 255) /* else just use component */ + { + /* Since PNG_OPTIMIZED_ALPHA was not set it is + * necessary to invert the sRGB transfer + * function and multiply the alpha out. + */ + component = png_sRGB_table[component] * alpha; + component += png_sRGB_table[outrow[0]] * + (255-alpha); + component = PNG_sRGB_FROM_LINEAR(component); + } + + outrow[0] = (png_byte)component; + } + + inrow += 2; /* gray and alpha channel */ + } + } + } + + else /* constant background value */ + { + png_byte background8 = display->background->green; + png_uint_16 background = png_sRGB_table[background8]; + + for (; ylocal_row); + png_bytep outrow = first_row + y * step_row; + png_const_bytep end_row = outrow + width; + + /* Read the row, which is packed: */ + png_read_row(png_ptr, inrow, NULL); + + /* Now do the composition on each pixel in this row. */ + outrow += startx; + for (; outrow < end_row; outrow += stepx) + { + png_byte alpha = inrow[1]; + + if (alpha > 0) /* else use background */ + { + png_uint_32 component = inrow[0]; + + if (alpha < 255) /* else just use component */ + { + component = png_sRGB_table[component] * alpha; + component += background * (255-alpha); + component = PNG_sRGB_FROM_LINEAR(component); + } + + outrow[0] = (png_byte)component; + } + + else + outrow[0] = background8; + + inrow += 2; /* gray and alpha channel */ + } + + row += display->row_bytes; + } + } + } + } + break; + + case 16: + /* 16-bit linear with pre-multiplied alpha; the pre-multiplication must + * still be done and, maybe, the alpha channel removed. This code also + * handles the alpha-first option. + */ + { + png_uint_16p first_row = png_voidcast(png_uint_16p, + display->first_row); + /* The division by two is safe because the caller passed in a + * stride which was multiplied by 2 (below) to get row_bytes. + */ + ptrdiff_t step_row = display->row_bytes / 2; + int preserve_alpha = (image->format & PNG_FORMAT_FLAG_ALPHA) != 0; + unsigned int outchannels = 1+preserve_alpha; + int swap_alpha = 0; + + if (preserve_alpha && (image->format & PNG_FORMAT_FLAG_AFIRST)) + swap_alpha = 1; + + for (pass = 0; pass < passes; ++pass) + { + unsigned int startx, stepx, stepy; + png_uint_32 y; + + /* The 'x' start and step are adjusted to output components here. + */ + if (png_ptr->interlaced == PNG_INTERLACE_ADAM7) + { + /* The row may be empty for a short image: */ + if (PNG_PASS_COLS(width, pass) == 0) + continue; + + startx = PNG_PASS_START_COL(pass) * outchannels; + stepx = PNG_PASS_COL_OFFSET(pass) * outchannels; + y = PNG_PASS_START_ROW(pass); + stepy = PNG_PASS_ROW_OFFSET(pass); + } + + else + { + y = 0; + startx = 0; + stepx = outchannels; + stepy = 1; + } + + for (; ylocal_row), NULL); + inrow = png_voidcast(png_const_uint_16p, display->local_row); + + /* Now do the pre-multiplication on each pixel in this row. + */ + outrow += startx; + for (; outrow < end_row; outrow += stepx) + { + png_uint_32 component = inrow[0]; + png_uint_16 alpha = inrow[1]; + + if (alpha > 0) /* else 0 */ + { + if (alpha < 65535) /* else just use component */ + { + component *= alpha; + component += 32767; + component /= 65535; + } + } + + else + component = 0; + + outrow[swap_alpha] = (png_uint_16)component; + if (preserve_alpha) + outrow[1 ^ swap_alpha] = alpha; + + inrow += 2; /* components and alpha channel */ + } + } + } + } + break; + } + + return 1; +} + +/* The guts of png_image_finish_read as a png_safe_execute callback. */ +static int +png_image_read_direct(png_voidp argument) +{ + png_image_read_control *display = png_voidcast(png_image_read_control*, + argument); + png_imagep image = display->image; + png_structrp png_ptr = image->opaque->png_ptr; + png_inforp info_ptr = image->opaque->info_ptr; + + png_uint_32 format = image->format; + int linear = (format & PNG_FORMAT_FLAG_LINEAR) != 0; + int do_local_compose = 0; + int do_local_background = 0; /* to avoid double gamma correction bug */ + int passes = 0; + + /* Add transforms to ensure the correct output format is produced then check + * that the required implementation support is there. Always expand; always + * need 8 bits minimum, no palette and expanded tRNS. + */ + png_set_expand(png_ptr); + + /* Now check the format to see if it was modified. */ + { + png_uint_32 base_format = png_image_format(png_ptr) & + ~PNG_FORMAT_FLAG_COLORMAP /* removed by png_set_expand */; + png_uint_32 change = format ^ base_format; + png_fixed_point output_gamma; + int mode; /* alpha mode */ + + /* Do this first so that we have a record if rgb to gray is happening. */ + if (change & PNG_FORMAT_FLAG_COLOR) + { + /* gray<->color transformation required. */ + if (format & PNG_FORMAT_FLAG_COLOR) + png_set_gray_to_rgb(png_ptr); + + else + { + /* libpng can't do both rgb to gray and + * background/pre-multiplication if there is also significant gamma + * correction, because both operations require linear colors and + * the code only supports one transform doing the gamma correction. + * Handle this by doing the pre-multiplication or background + * operation in this code, if necessary. + * + * TODO: fix this by rewriting pngrtran.c (!) + * + * For the moment (given that fixing this in pngrtran.c is an + * enormous change) 'do_local_background' is used to indicate that + * the problem exists. + */ + if (base_format & PNG_FORMAT_FLAG_ALPHA) + do_local_background = 1/*maybe*/; + + png_set_rgb_to_gray_fixed(png_ptr, PNG_ERROR_ACTION_NONE, + PNG_RGB_TO_GRAY_DEFAULT, PNG_RGB_TO_GRAY_DEFAULT); + } + + change &= ~PNG_FORMAT_FLAG_COLOR; + } + + /* Set the gamma appropriately, linear for 16-bit input, sRGB otherwise. + */ + { + png_fixed_point input_gamma_default; + + if ((base_format & PNG_FORMAT_FLAG_LINEAR) && + (image->flags & PNG_IMAGE_FLAG_16BIT_sRGB) == 0) + input_gamma_default = PNG_GAMMA_LINEAR; + else + input_gamma_default = PNG_DEFAULT_sRGB; + + /* Call png_set_alpha_mode to set the default for the input gamma; the + * output gamma is set by a second call below. + */ + png_set_alpha_mode_fixed(png_ptr, PNG_ALPHA_PNG, input_gamma_default); + } + + if (linear) + { + /* If there *is* an alpha channel in the input it must be multiplied + * out; use PNG_ALPHA_STANDARD, otherwise just use PNG_ALPHA_PNG. + */ + if (base_format & PNG_FORMAT_FLAG_ALPHA) + mode = PNG_ALPHA_STANDARD; /* associated alpha */ + + else + mode = PNG_ALPHA_PNG; + + output_gamma = PNG_GAMMA_LINEAR; + } + + else + { + mode = PNG_ALPHA_PNG; + output_gamma = PNG_DEFAULT_sRGB; + } + + /* If 'do_local_background' is set check for the presence of gamma + * correction; this is part of the work-round for the libpng bug + * described above. + * + * TODO: fix libpng and remove this. + */ + if (do_local_background) + { + png_fixed_point gtest; + + /* This is 'png_gamma_threshold' from pngrtran.c; the test used for + * gamma correction, the screen gamma hasn't been set on png_struct + * yet; it's set below. png_struct::gamma, however, is set to the + * final value. + */ + if (png_muldiv(>est, output_gamma, png_ptr->colorspace.gamma, + PNG_FP_1) && !png_gamma_significant(gtest)) + do_local_background = 0; + + else if (mode == PNG_ALPHA_STANDARD) + { + do_local_background = 2/*required*/; + mode = PNG_ALPHA_PNG; /* prevent libpng doing it */ + } + + /* else leave as 1 for the checks below */ + } + + /* If the bit-depth changes then handle that here. */ + if (change & PNG_FORMAT_FLAG_LINEAR) + { + if (linear /*16-bit output*/) + png_set_expand_16(png_ptr); + + else /* 8-bit output */ + png_set_scale_16(png_ptr); + + change &= ~PNG_FORMAT_FLAG_LINEAR; + } + + /* Now the background/alpha channel changes. */ + if (change & PNG_FORMAT_FLAG_ALPHA) + { + /* Removing an alpha channel requires composition for the 8-bit + * formats; for the 16-bit it is already done, above, by the + * pre-multiplication and the channel just needs to be stripped. + */ + if (base_format & PNG_FORMAT_FLAG_ALPHA) + { + /* If RGB->gray is happening the alpha channel must be left and the + * operation completed locally. + * + * TODO: fix libpng and remove this. + */ + if (do_local_background) + do_local_background = 2/*required*/; + + /* 16-bit output: just remove the channel */ + else if (linear) /* compose on black (well, pre-multiply) */ + png_set_strip_alpha(png_ptr); + + /* 8-bit output: do an appropriate compose */ + else if (display->background != NULL) + { + png_color_16 c; + + c.index = 0; /*unused*/ + c.red = display->background->red; + c.green = display->background->green; + c.blue = display->background->blue; + c.gray = display->background->green; + + /* This is always an 8-bit sRGB value, using the 'green' channel + * for gray is much better than calculating the luminance here; + * we can get off-by-one errors in that calculation relative to + * the app expectations and that will show up in transparent + * pixels. + */ + png_set_background_fixed(png_ptr, &c, + PNG_BACKGROUND_GAMMA_SCREEN, 0/*need_expand*/, + 0/*gamma: not used*/); + } + + else /* compose on row: implemented below. */ + { + do_local_compose = 1; + /* This leaves the alpha channel in the output, so it has to be + * removed by the code below. Set the encoding to the 'OPTIMIZE' + * one so the code only has to hack on the pixels that require + * composition. + */ + mode = PNG_ALPHA_OPTIMIZED; + } + } + + else /* output needs an alpha channel */ + { + /* This is tricky because it happens before the swap operation has + * been accomplished; however, the swap does *not* swap the added + * alpha channel (weird API), so it must be added in the correct + * place. + */ + png_uint_32 filler; /* opaque filler */ + int where; + + if (linear) + filler = 65535; + + else + filler = 255; + +# ifdef PNG_FORMAT_AFIRST_SUPPORTED + if (format & PNG_FORMAT_FLAG_AFIRST) + { + where = PNG_FILLER_BEFORE; + change &= ~PNG_FORMAT_FLAG_AFIRST; + } + + else +# endif + where = PNG_FILLER_AFTER; + + png_set_add_alpha(png_ptr, filler, where); + } + + /* This stops the (irrelevant) call to swap_alpha below. */ + change &= ~PNG_FORMAT_FLAG_ALPHA; + } + + /* Now set the alpha mode correctly; this is always done, even if there is + * no alpha channel in either the input or the output because it correctly + * sets the output gamma. + */ + png_set_alpha_mode_fixed(png_ptr, mode, output_gamma); + +# ifdef PNG_FORMAT_BGR_SUPPORTED + if (change & PNG_FORMAT_FLAG_BGR) + { + /* Check only the output format; PNG is never BGR; don't do this if + * the output is gray, but fix up the 'format' value in that case. + */ + if (format & PNG_FORMAT_FLAG_COLOR) + png_set_bgr(png_ptr); + + else + format &= ~PNG_FORMAT_FLAG_BGR; + + change &= ~PNG_FORMAT_FLAG_BGR; + } +# endif + +# ifdef PNG_FORMAT_AFIRST_SUPPORTED + if (change & PNG_FORMAT_FLAG_AFIRST) + { + /* Only relevant if there is an alpha channel - it's particularly + * important to handle this correctly because do_local_compose may + * be set above and then libpng will keep the alpha channel for this + * code to remove. + */ + if (format & PNG_FORMAT_FLAG_ALPHA) + { + /* Disable this if doing a local background, + * TODO: remove this when local background is no longer required. + */ + if (do_local_background != 2) + png_set_swap_alpha(png_ptr); + } + + else + format &= ~PNG_FORMAT_FLAG_AFIRST; + + change &= ~PNG_FORMAT_FLAG_AFIRST; + } +# endif + + /* If the *output* is 16-bit then we need to check for a byte-swap on this + * architecture. + */ + if (linear) + { + PNG_CONST png_uint_16 le = 0x0001; + + if (*(png_const_bytep)&le) + png_set_swap(png_ptr); + } + + /* If change is not now 0 some transformation is missing - error out. */ + if (change) + png_error(png_ptr, "png_read_image: unsupported transformation"); + } + + PNG_SKIP_CHUNKS(png_ptr); + + /* Update the 'info' structure and make sure the result is as required; first + * make sure to turn on the interlace handling if it will be required + * (because it can't be turned on *after* the call to png_read_update_info!) + * + * TODO: remove the do_local_background fixup below. + */ + if (!do_local_compose && do_local_background != 2) + passes = png_set_interlace_handling(png_ptr); + + png_read_update_info(png_ptr, info_ptr); + + { + png_uint_32 info_format = 0; + + if (info_ptr->color_type & PNG_COLOR_MASK_COLOR) + info_format |= PNG_FORMAT_FLAG_COLOR; + + if (info_ptr->color_type & PNG_COLOR_MASK_ALPHA) + { + /* do_local_compose removes this channel below. */ + if (!do_local_compose) + { + /* do_local_background does the same if required. */ + if (do_local_background != 2 || + (format & PNG_FORMAT_FLAG_ALPHA) != 0) + info_format |= PNG_FORMAT_FLAG_ALPHA; + } + } + + else if (do_local_compose) /* internal error */ + png_error(png_ptr, "png_image_read: alpha channel lost"); + + if (info_ptr->bit_depth == 16) + info_format |= PNG_FORMAT_FLAG_LINEAR; + +# ifdef PNG_FORMAT_BGR_SUPPORTED + if (png_ptr->transformations & PNG_BGR) + info_format |= PNG_FORMAT_FLAG_BGR; +# endif + +# ifdef PNG_FORMAT_AFIRST_SUPPORTED + if (do_local_background == 2) + { + if (format & PNG_FORMAT_FLAG_AFIRST) + info_format |= PNG_FORMAT_FLAG_AFIRST; + } + + if ((png_ptr->transformations & PNG_SWAP_ALPHA) != 0 || + ((png_ptr->transformations & PNG_ADD_ALPHA) != 0 && + (png_ptr->flags & PNG_FLAG_FILLER_AFTER) == 0)) + { + if (do_local_background == 2) + png_error(png_ptr, "unexpected alpha swap transformation"); + + info_format |= PNG_FORMAT_FLAG_AFIRST; + } +# endif + + /* This is actually an internal error. */ + if (info_format != format) + png_error(png_ptr, "png_read_image: invalid transformations"); + } + + /* Now read the rows. If do_local_compose is set then it is necessary to use + * a local row buffer. The output will be GA, RGBA or BGRA and must be + * converted to G, RGB or BGR as appropriate. The 'local_row' member of the + * display acts as a flag. + */ + { + png_voidp first_row = display->buffer; + ptrdiff_t row_bytes = display->row_stride; + + if (linear) + row_bytes *= 2; + + /* The following expression is designed to work correctly whether it gives + * a signed or an unsigned result. + */ + if (row_bytes < 0) + { + char *ptr = png_voidcast(char*, first_row); + ptr += (image->height-1) * (-row_bytes); + first_row = png_voidcast(png_voidp, ptr); + } + + display->first_row = first_row; + display->row_bytes = row_bytes; + } + + if (do_local_compose) + { + int result; + png_voidp row = png_malloc(png_ptr, png_get_rowbytes(png_ptr, info_ptr)); + + display->local_row = row; + result = png_safe_execute(image, png_image_read_composite, display); + display->local_row = NULL; + png_free(png_ptr, row); + + return result; + } + + else if (do_local_background == 2) + { + int result; + png_voidp row = png_malloc(png_ptr, png_get_rowbytes(png_ptr, info_ptr)); + + display->local_row = row; + result = png_safe_execute(image, png_image_read_background, display); + display->local_row = NULL; + png_free(png_ptr, row); + + return result; + } + + else + { + png_alloc_size_t row_bytes = display->row_bytes; + + while (--passes >= 0) + { + png_uint_32 y = image->height; + png_bytep row = png_voidcast(png_bytep, display->first_row); + + while (y-- > 0) + { + png_read_row(png_ptr, row, NULL); + row += row_bytes; + } + } + + return 1; + } +} + +int PNGAPI +png_image_finish_read(png_imagep image, png_const_colorp background, + void *buffer, png_int_32 row_stride, void *colormap) +{ + if (image != NULL && image->version == PNG_IMAGE_VERSION) + { + png_uint_32 check; + + if (row_stride == 0) + row_stride = PNG_IMAGE_ROW_STRIDE(*image); + + if (row_stride < 0) + check = -row_stride; + + else + check = row_stride; + + if (image->opaque != NULL && buffer != NULL && + check >= PNG_IMAGE_ROW_STRIDE(*image)) + { + if ((image->format & PNG_FORMAT_FLAG_COLORMAP) == 0 || + (image->colormap_entries > 0 && colormap != NULL)) + { + int result; + png_image_read_control display; + + memset(&display, 0, (sizeof display)); + display.image = image; + display.buffer = buffer; + display.row_stride = row_stride; + display.colormap = colormap; + display.background = background; + display.local_row = NULL; + + /* Choose the correct 'end' routine; for the color-map case all the + * setup has already been done. + */ + if (image->format & PNG_FORMAT_FLAG_COLORMAP) + result = + png_safe_execute(image, png_image_read_colormap, &display) && + png_safe_execute(image, png_image_read_colormapped, &display); + + else + result = + png_safe_execute(image, png_image_read_direct, &display); + + png_image_free(image); + return result; + } + + else + return png_image_error(image, + "png_image_finish_read[color-map]: no color-map"); + } + + else + return png_image_error(image, + "png_image_finish_read: invalid argument"); + } + + else if (image != NULL) + return png_image_error(image, + "png_image_finish_read: damaged PNG_IMAGE_VERSION"); + + return 0; +} + +#endif /* PNG_SIMPLIFIED_READ_SUPPORTED */ +#endif /* PNG_READ_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngrio.c b/src/SDL2/external/libpng-1.6.2/pngrio.c new file mode 100644 index 000000000..d7864407b --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngrio.c @@ -0,0 +1,118 @@ + +/* pngrio.c - functions for data input + * + * Last changed in libpng 1.6.0 [February 14, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * This file provides a location for all input. Users who need + * special handling are expected to write a function that has the same + * arguments as this and performs a similar function, but that possibly + * has a different input method. Note that you shouldn't change this + * function, but rather write a replacement function and then make + * libpng use it at run time with png_set_read_fn(...). + */ + +#include "pngpriv.h" + +#ifdef PNG_READ_SUPPORTED + +/* Read the data from whatever input you are using. The default routine + * reads from a file pointer. Note that this routine sometimes gets called + * with very small lengths, so you should implement some kind of simple + * buffering if you are using unbuffered reads. This should never be asked + * to read more then 64K on a 16 bit machine. + */ +void /* PRIVATE */ +png_read_data(png_structrp png_ptr, png_bytep data, png_size_t length) +{ + png_debug1(4, "reading %d bytes", (int)length); + + if (png_ptr->read_data_fn != NULL) + (*(png_ptr->read_data_fn))(png_ptr, data, length); + + else + png_error(png_ptr, "Call to NULL read function"); +} + +#ifdef PNG_STDIO_SUPPORTED +/* This is the function that does the actual reading of data. If you are + * not reading from a standard C stream, you should create a replacement + * read_data function and use it at run time with png_set_read_fn(), rather + * than changing the library. + */ +void PNGCBAPI +png_default_read_data(png_structp png_ptr, png_bytep data, png_size_t length) +{ + png_size_t check; + + if (png_ptr == NULL) + return; + + /* fread() returns 0 on error, so it is OK to store this in a png_size_t + * instead of an int, which is what fread() actually returns. + */ + check = fread(data, 1, length, png_voidcast(png_FILE_p, png_ptr->io_ptr)); + + if (check != length) + png_error(png_ptr, "Read Error"); +} +#endif + +/* This function allows the application to supply a new input function + * for libpng if standard C streams aren't being used. + * + * This function takes as its arguments: + * + * png_ptr - pointer to a png input data structure + * + * io_ptr - pointer to user supplied structure containing info about + * the input functions. May be NULL. + * + * read_data_fn - pointer to a new input function that takes as its + * arguments a pointer to a png_struct, a pointer to + * a location where input data can be stored, and a 32-bit + * unsigned int that is the number of bytes to be read. + * To exit and output any fatal error messages the new write + * function should call png_error(png_ptr, "Error msg"). + * May be NULL, in which case libpng's default function will + * be used. + */ +void PNGAPI +png_set_read_fn(png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr read_data_fn) +{ + if (png_ptr == NULL) + return; + + png_ptr->io_ptr = io_ptr; + +#ifdef PNG_STDIO_SUPPORTED + if (read_data_fn != NULL) + png_ptr->read_data_fn = read_data_fn; + + else + png_ptr->read_data_fn = png_default_read_data; +#else + png_ptr->read_data_fn = read_data_fn; +#endif + + /* It is an error to write to a read device */ + if (png_ptr->write_data_fn != NULL) + { + png_ptr->write_data_fn = NULL; + png_warning(png_ptr, + "Can't set both read_data_fn and write_data_fn in the" + " same structure"); + } + +#ifdef PNG_WRITE_FLUSH_SUPPORTED + png_ptr->output_flush_fn = NULL; +#endif +} +#endif /* PNG_READ_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngrtran.c b/src/SDL2/external/libpng-1.6.2/pngrtran.c new file mode 100644 index 000000000..e378ceba4 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngrtran.c @@ -0,0 +1,5101 @@ + +/* pngrtran.c - transforms the data in a row for PNG readers + * + * Last changed in libpng 1.6.2 [April 25, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * This file contains functions optionally called by an application + * in order to tell libpng how to handle data when reading a PNG. + * Transformations that are used in both reading and writing are + * in pngtrans.c. + */ + +#include "pngpriv.h" + +#ifdef PNG_READ_SUPPORTED + +/* Set the action on getting a CRC error for an ancillary or critical chunk. */ +void PNGAPI +png_set_crc_action(png_structrp png_ptr, int crit_action, int ancil_action) +{ + png_debug(1, "in png_set_crc_action"); + + if (png_ptr == NULL) + return; + + /* Tell libpng how we react to CRC errors in critical chunks */ + switch (crit_action) + { + case PNG_CRC_NO_CHANGE: /* Leave setting as is */ + break; + + case PNG_CRC_WARN_USE: /* Warn/use data */ + png_ptr->flags &= ~PNG_FLAG_CRC_CRITICAL_MASK; + png_ptr->flags |= PNG_FLAG_CRC_CRITICAL_USE; + break; + + case PNG_CRC_QUIET_USE: /* Quiet/use data */ + png_ptr->flags &= ~PNG_FLAG_CRC_CRITICAL_MASK; + png_ptr->flags |= PNG_FLAG_CRC_CRITICAL_USE | + PNG_FLAG_CRC_CRITICAL_IGNORE; + break; + + case PNG_CRC_WARN_DISCARD: /* Not a valid action for critical data */ + png_warning(png_ptr, + "Can't discard critical data on CRC error"); + case PNG_CRC_ERROR_QUIT: /* Error/quit */ + + case PNG_CRC_DEFAULT: + default: + png_ptr->flags &= ~PNG_FLAG_CRC_CRITICAL_MASK; + break; + } + + /* Tell libpng how we react to CRC errors in ancillary chunks */ + switch (ancil_action) + { + case PNG_CRC_NO_CHANGE: /* Leave setting as is */ + break; + + case PNG_CRC_WARN_USE: /* Warn/use data */ + png_ptr->flags &= ~PNG_FLAG_CRC_ANCILLARY_MASK; + png_ptr->flags |= PNG_FLAG_CRC_ANCILLARY_USE; + break; + + case PNG_CRC_QUIET_USE: /* Quiet/use data */ + png_ptr->flags &= ~PNG_FLAG_CRC_ANCILLARY_MASK; + png_ptr->flags |= PNG_FLAG_CRC_ANCILLARY_USE | + PNG_FLAG_CRC_ANCILLARY_NOWARN; + break; + + case PNG_CRC_ERROR_QUIT: /* Error/quit */ + png_ptr->flags &= ~PNG_FLAG_CRC_ANCILLARY_MASK; + png_ptr->flags |= PNG_FLAG_CRC_ANCILLARY_NOWARN; + break; + + case PNG_CRC_WARN_DISCARD: /* Warn/discard data */ + + case PNG_CRC_DEFAULT: + default: + png_ptr->flags &= ~PNG_FLAG_CRC_ANCILLARY_MASK; + break; + } +} + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +/* Is it OK to set a transformation now? Only if png_start_read_image or + * png_read_update_info have not been called. It is not necessary for the IHDR + * to have been read in all cases, the parameter allows for this check too. + */ +static int +png_rtran_ok(png_structrp png_ptr, int need_IHDR) +{ + if (png_ptr != NULL) + { + if (png_ptr->flags & PNG_FLAG_ROW_INIT) + png_app_error(png_ptr, + "invalid after png_start_read_image or png_read_update_info"); + + else if (need_IHDR && (png_ptr->mode & PNG_HAVE_IHDR) == 0) + png_app_error(png_ptr, "invalid before the PNG header has been read"); + + else + { + /* Turn on failure to initialize correctly for all transforms. */ + png_ptr->flags |= PNG_FLAG_DETECT_UNINITIALIZED; + + return 1; /* Ok */ + } + } + + return 0; /* no png_error possible! */ +} +#endif + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +/* Handle alpha and tRNS via a background color */ +void PNGFAPI +png_set_background_fixed(png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, png_fixed_point background_gamma) +{ + png_debug(1, "in png_set_background_fixed"); + + if (!png_rtran_ok(png_ptr, 0) || background_color == NULL) + return; + + if (background_gamma_code == PNG_BACKGROUND_GAMMA_UNKNOWN) + { + png_warning(png_ptr, "Application must supply a known background gamma"); + return; + } + + png_ptr->transformations |= PNG_COMPOSE | PNG_STRIP_ALPHA; + png_ptr->transformations &= ~PNG_ENCODE_ALPHA; + png_ptr->flags &= ~PNG_FLAG_OPTIMIZE_ALPHA; + + png_ptr->background = *background_color; + png_ptr->background_gamma = background_gamma; + png_ptr->background_gamma_type = (png_byte)(background_gamma_code); + if (need_expand) + png_ptr->transformations |= PNG_BACKGROUND_EXPAND; + else + png_ptr->transformations &= ~PNG_BACKGROUND_EXPAND; +} + +# ifdef PNG_FLOATING_POINT_SUPPORTED +void PNGAPI +png_set_background(png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, double background_gamma) +{ + png_set_background_fixed(png_ptr, background_color, background_gamma_code, + need_expand, png_fixed(png_ptr, background_gamma, "png_set_background")); +} +# endif /* FLOATING_POINT */ +#endif /* READ_BACKGROUND */ + +/* Scale 16-bit depth files to 8-bit depth. If both of these are set then the + * one that pngrtran does first (scale) happens. This is necessary to allow the + * TRANSFORM and API behavior to be somewhat consistent, and it's simpler. + */ +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED +void PNGAPI +png_set_scale_16(png_structrp png_ptr) +{ + png_debug(1, "in png_set_scale_16"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + png_ptr->transformations |= PNG_SCALE_16_TO_8; +} +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED +/* Chop 16-bit depth files to 8-bit depth */ +void PNGAPI +png_set_strip_16(png_structrp png_ptr) +{ + png_debug(1, "in png_set_strip_16"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + png_ptr->transformations |= PNG_16_TO_8; +} +#endif + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED +void PNGAPI +png_set_strip_alpha(png_structrp png_ptr) +{ + png_debug(1, "in png_set_strip_alpha"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + png_ptr->transformations |= PNG_STRIP_ALPHA; +} +#endif + +#if defined(PNG_READ_ALPHA_MODE_SUPPORTED) || defined(PNG_READ_GAMMA_SUPPORTED) +static png_fixed_point +translate_gamma_flags(png_structrp png_ptr, png_fixed_point output_gamma, + int is_screen) +{ + /* Check for flag values. The main reason for having the old Mac value as a + * flag is that it is pretty near impossible to work out what the correct + * value is from Apple documentation - a working Mac system is needed to + * discover the value! + */ + if (output_gamma == PNG_DEFAULT_sRGB || + output_gamma == PNG_FP_1 / PNG_DEFAULT_sRGB) + { + /* If there is no sRGB support this just sets the gamma to the standard + * sRGB value. (This is a side effect of using this function!) + */ +# ifdef PNG_READ_sRGB_SUPPORTED + png_ptr->flags |= PNG_FLAG_ASSUME_sRGB; +# else + PNG_UNUSED(png_ptr) +# endif + if (is_screen) + output_gamma = PNG_GAMMA_sRGB; + else + output_gamma = PNG_GAMMA_sRGB_INVERSE; + } + + else if (output_gamma == PNG_GAMMA_MAC_18 || + output_gamma == PNG_FP_1 / PNG_GAMMA_MAC_18) + { + if (is_screen) + output_gamma = PNG_GAMMA_MAC_OLD; + else + output_gamma = PNG_GAMMA_MAC_INVERSE; + } + + return output_gamma; +} + +# ifdef PNG_FLOATING_POINT_SUPPORTED +static png_fixed_point +convert_gamma_value(png_structrp png_ptr, double output_gamma) +{ + /* The following silently ignores cases where fixed point (times 100,000) + * gamma values are passed to the floating point API. This is safe and it + * means the fixed point constants work just fine with the floating point + * API. The alternative would just lead to undetected errors and spurious + * bug reports. Negative values fail inside the _fixed API unless they + * correspond to the flag values. + */ + if (output_gamma > 0 && output_gamma < 128) + output_gamma *= PNG_FP_1; + + /* This preserves -1 and -2 exactly: */ + output_gamma = floor(output_gamma + .5); + + if (output_gamma > PNG_FP_MAX || output_gamma < PNG_FP_MIN) + png_fixed_error(png_ptr, "gamma value"); + + return (png_fixed_point)output_gamma; +} +# endif +#endif /* READ_ALPHA_MODE || READ_GAMMA */ + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED +void PNGFAPI +png_set_alpha_mode_fixed(png_structrp png_ptr, int mode, + png_fixed_point output_gamma) +{ + int compose = 0; + png_fixed_point file_gamma; + + png_debug(1, "in png_set_alpha_mode"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + output_gamma = translate_gamma_flags(png_ptr, output_gamma, 1/*screen*/); + + /* Validate the value to ensure it is in a reasonable range. The value + * is expected to be 1 or greater, but this range test allows for some + * viewing correction values. The intent is to weed out users of this API + * who use the inverse of the gamma value accidentally! Since some of these + * values are reasonable this may have to be changed. + */ + if (output_gamma < 70000 || output_gamma > 300000) + png_error(png_ptr, "output gamma out of expected range"); + + /* The default file gamma is the inverse of the output gamma; the output + * gamma may be changed below so get the file value first: + */ + file_gamma = png_reciprocal(output_gamma); + + /* There are really 8 possibilities here, composed of any combination + * of: + * + * premultiply the color channels + * do not encode non-opaque pixels + * encode the alpha as well as the color channels + * + * The differences disappear if the input/output ('screen') gamma is 1.0, + * because then the encoding is a no-op and there is only the choice of + * premultiplying the color channels or not. + * + * png_set_alpha_mode and png_set_background interact because both use + * png_compose to do the work. Calling both is only useful when + * png_set_alpha_mode is used to set the default mode - PNG_ALPHA_PNG - along + * with a default gamma value. Otherwise PNG_COMPOSE must not be set. + */ + switch (mode) + { + case PNG_ALPHA_PNG: /* default: png standard */ + /* No compose, but it may be set by png_set_background! */ + png_ptr->transformations &= ~PNG_ENCODE_ALPHA; + png_ptr->flags &= ~PNG_FLAG_OPTIMIZE_ALPHA; + break; + + case PNG_ALPHA_ASSOCIATED: /* color channels premultiplied */ + compose = 1; + png_ptr->transformations &= ~PNG_ENCODE_ALPHA; + png_ptr->flags &= ~PNG_FLAG_OPTIMIZE_ALPHA; + /* The output is linear: */ + output_gamma = PNG_FP_1; + break; + + case PNG_ALPHA_OPTIMIZED: /* associated, non-opaque pixels linear */ + compose = 1; + png_ptr->transformations &= ~PNG_ENCODE_ALPHA; + png_ptr->flags |= PNG_FLAG_OPTIMIZE_ALPHA; + /* output_gamma records the encoding of opaque pixels! */ + break; + + case PNG_ALPHA_BROKEN: /* associated, non-linear, alpha encoded */ + compose = 1; + png_ptr->transformations |= PNG_ENCODE_ALPHA; + png_ptr->flags &= ~PNG_FLAG_OPTIMIZE_ALPHA; + break; + + default: + png_error(png_ptr, "invalid alpha mode"); + } + + /* Only set the default gamma if the file gamma has not been set (this has + * the side effect that the gamma in a second call to png_set_alpha_mode will + * be ignored.) + */ + if (png_ptr->colorspace.gamma == 0) + { + png_ptr->colorspace.gamma = file_gamma; + png_ptr->colorspace.flags |= PNG_COLORSPACE_HAVE_GAMMA; + } + + /* But always set the output gamma: */ + png_ptr->screen_gamma = output_gamma; + + /* Finally, if pre-multiplying, set the background fields to achieve the + * desired result. + */ + if (compose) + { + /* And obtain alpha pre-multiplication by composing on black: */ + memset(&png_ptr->background, 0, (sizeof png_ptr->background)); + png_ptr->background_gamma = png_ptr->colorspace.gamma; /* just in case */ + png_ptr->background_gamma_type = PNG_BACKGROUND_GAMMA_FILE; + png_ptr->transformations &= ~PNG_BACKGROUND_EXPAND; + + if (png_ptr->transformations & PNG_COMPOSE) + png_error(png_ptr, + "conflicting calls to set alpha mode and background"); + + png_ptr->transformations |= PNG_COMPOSE; + } +} + +# ifdef PNG_FLOATING_POINT_SUPPORTED +void PNGAPI +png_set_alpha_mode(png_structrp png_ptr, int mode, double output_gamma) +{ + png_set_alpha_mode_fixed(png_ptr, mode, convert_gamma_value(png_ptr, + output_gamma)); +} +# endif +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +/* Dither file to 8-bit. Supply a palette, the current number + * of elements in the palette, the maximum number of elements + * allowed, and a histogram if possible. If the current number + * of colors is greater then the maximum number, the palette will be + * modified to fit in the maximum number. "full_quantize" indicates + * whether we need a quantizing cube set up for RGB images, or if we + * simply are reducing the number of colors in a paletted image. + */ + +typedef struct png_dsort_struct +{ + struct png_dsort_struct * next; + png_byte left; + png_byte right; +} png_dsort; +typedef png_dsort * png_dsortp; +typedef png_dsort * * png_dsortpp; + +void PNGAPI +png_set_quantize(png_structrp png_ptr, png_colorp palette, + int num_palette, int maximum_colors, png_const_uint_16p histogram, + int full_quantize) +{ + png_debug(1, "in png_set_quantize"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + png_ptr->transformations |= PNG_QUANTIZE; + + if (!full_quantize) + { + int i; + + png_ptr->quantize_index = (png_bytep)png_malloc(png_ptr, + (png_uint_32)(num_palette * (sizeof (png_byte)))); + for (i = 0; i < num_palette; i++) + png_ptr->quantize_index[i] = (png_byte)i; + } + + if (num_palette > maximum_colors) + { + if (histogram != NULL) + { + /* This is easy enough, just throw out the least used colors. + * Perhaps not the best solution, but good enough. + */ + + int i; + + /* Initialize an array to sort colors */ + png_ptr->quantize_sort = (png_bytep)png_malloc(png_ptr, + (png_uint_32)(num_palette * (sizeof (png_byte)))); + + /* Initialize the quantize_sort array */ + for (i = 0; i < num_palette; i++) + png_ptr->quantize_sort[i] = (png_byte)i; + + /* Find the least used palette entries by starting a + * bubble sort, and running it until we have sorted + * out enough colors. Note that we don't care about + * sorting all the colors, just finding which are + * least used. + */ + + for (i = num_palette - 1; i >= maximum_colors; i--) + { + int done; /* To stop early if the list is pre-sorted */ + int j; + + done = 1; + for (j = 0; j < i; j++) + { + if (histogram[png_ptr->quantize_sort[j]] + < histogram[png_ptr->quantize_sort[j + 1]]) + { + png_byte t; + + t = png_ptr->quantize_sort[j]; + png_ptr->quantize_sort[j] = png_ptr->quantize_sort[j + 1]; + png_ptr->quantize_sort[j + 1] = t; + done = 0; + } + } + + if (done) + break; + } + + /* Swap the palette around, and set up a table, if necessary */ + if (full_quantize) + { + int j = num_palette; + + /* Put all the useful colors within the max, but don't + * move the others. + */ + for (i = 0; i < maximum_colors; i++) + { + if ((int)png_ptr->quantize_sort[i] >= maximum_colors) + { + do + j--; + while ((int)png_ptr->quantize_sort[j] >= maximum_colors); + + palette[i] = palette[j]; + } + } + } + else + { + int j = num_palette; + + /* Move all the used colors inside the max limit, and + * develop a translation table. + */ + for (i = 0; i < maximum_colors; i++) + { + /* Only move the colors we need to */ + if ((int)png_ptr->quantize_sort[i] >= maximum_colors) + { + png_color tmp_color; + + do + j--; + while ((int)png_ptr->quantize_sort[j] >= maximum_colors); + + tmp_color = palette[j]; + palette[j] = palette[i]; + palette[i] = tmp_color; + /* Indicate where the color went */ + png_ptr->quantize_index[j] = (png_byte)i; + png_ptr->quantize_index[i] = (png_byte)j; + } + } + + /* Find closest color for those colors we are not using */ + for (i = 0; i < num_palette; i++) + { + if ((int)png_ptr->quantize_index[i] >= maximum_colors) + { + int min_d, k, min_k, d_index; + + /* Find the closest color to one we threw out */ + d_index = png_ptr->quantize_index[i]; + min_d = PNG_COLOR_DIST(palette[d_index], palette[0]); + for (k = 1, min_k = 0; k < maximum_colors; k++) + { + int d; + + d = PNG_COLOR_DIST(palette[d_index], palette[k]); + + if (d < min_d) + { + min_d = d; + min_k = k; + } + } + /* Point to closest color */ + png_ptr->quantize_index[i] = (png_byte)min_k; + } + } + } + png_free(png_ptr, png_ptr->quantize_sort); + png_ptr->quantize_sort = NULL; + } + else + { + /* This is much harder to do simply (and quickly). Perhaps + * we need to go through a median cut routine, but those + * don't always behave themselves with only a few colors + * as input. So we will just find the closest two colors, + * and throw out one of them (chosen somewhat randomly). + * [We don't understand this at all, so if someone wants to + * work on improving it, be our guest - AED, GRP] + */ + int i; + int max_d; + int num_new_palette; + png_dsortp t; + png_dsortpp hash; + + t = NULL; + + /* Initialize palette index arrays */ + png_ptr->index_to_palette = (png_bytep)png_malloc(png_ptr, + (png_uint_32)(num_palette * (sizeof (png_byte)))); + png_ptr->palette_to_index = (png_bytep)png_malloc(png_ptr, + (png_uint_32)(num_palette * (sizeof (png_byte)))); + + /* Initialize the sort array */ + for (i = 0; i < num_palette; i++) + { + png_ptr->index_to_palette[i] = (png_byte)i; + png_ptr->palette_to_index[i] = (png_byte)i; + } + + hash = (png_dsortpp)png_calloc(png_ptr, (png_uint_32)(769 * + (sizeof (png_dsortp)))); + + num_new_palette = num_palette; + + /* Initial wild guess at how far apart the farthest pixel + * pair we will be eliminating will be. Larger + * numbers mean more areas will be allocated, Smaller + * numbers run the risk of not saving enough data, and + * having to do this all over again. + * + * I have not done extensive checking on this number. + */ + max_d = 96; + + while (num_new_palette > maximum_colors) + { + for (i = 0; i < num_new_palette - 1; i++) + { + int j; + + for (j = i + 1; j < num_new_palette; j++) + { + int d; + + d = PNG_COLOR_DIST(palette[i], palette[j]); + + if (d <= max_d) + { + + t = (png_dsortp)png_malloc_warn(png_ptr, + (png_uint_32)(sizeof (png_dsort))); + + if (t == NULL) + break; + + t->next = hash[d]; + t->left = (png_byte)i; + t->right = (png_byte)j; + hash[d] = t; + } + } + if (t == NULL) + break; + } + + if (t != NULL) + for (i = 0; i <= max_d; i++) + { + if (hash[i] != NULL) + { + png_dsortp p; + + for (p = hash[i]; p; p = p->next) + { + if ((int)png_ptr->index_to_palette[p->left] + < num_new_palette && + (int)png_ptr->index_to_palette[p->right] + < num_new_palette) + { + int j, next_j; + + if (num_new_palette & 0x01) + { + j = p->left; + next_j = p->right; + } + else + { + j = p->right; + next_j = p->left; + } + + num_new_palette--; + palette[png_ptr->index_to_palette[j]] + = palette[num_new_palette]; + if (!full_quantize) + { + int k; + + for (k = 0; k < num_palette; k++) + { + if (png_ptr->quantize_index[k] == + png_ptr->index_to_palette[j]) + png_ptr->quantize_index[k] = + png_ptr->index_to_palette[next_j]; + + if ((int)png_ptr->quantize_index[k] == + num_new_palette) + png_ptr->quantize_index[k] = + png_ptr->index_to_palette[j]; + } + } + + png_ptr->index_to_palette[png_ptr->palette_to_index + [num_new_palette]] = png_ptr->index_to_palette[j]; + + png_ptr->palette_to_index[png_ptr->index_to_palette[j]] + = png_ptr->palette_to_index[num_new_palette]; + + png_ptr->index_to_palette[j] = + (png_byte)num_new_palette; + + png_ptr->palette_to_index[num_new_palette] = + (png_byte)j; + } + if (num_new_palette <= maximum_colors) + break; + } + if (num_new_palette <= maximum_colors) + break; + } + } + + for (i = 0; i < 769; i++) + { + if (hash[i] != NULL) + { + png_dsortp p = hash[i]; + while (p) + { + t = p->next; + png_free(png_ptr, p); + p = t; + } + } + hash[i] = 0; + } + max_d += 96; + } + png_free(png_ptr, hash); + png_free(png_ptr, png_ptr->palette_to_index); + png_free(png_ptr, png_ptr->index_to_palette); + png_ptr->palette_to_index = NULL; + png_ptr->index_to_palette = NULL; + } + num_palette = maximum_colors; + } + if (png_ptr->palette == NULL) + { + png_ptr->palette = palette; + } + png_ptr->num_palette = (png_uint_16)num_palette; + + if (full_quantize) + { + int i; + png_bytep distance; + int total_bits = PNG_QUANTIZE_RED_BITS + PNG_QUANTIZE_GREEN_BITS + + PNG_QUANTIZE_BLUE_BITS; + int num_red = (1 << PNG_QUANTIZE_RED_BITS); + int num_green = (1 << PNG_QUANTIZE_GREEN_BITS); + int num_blue = (1 << PNG_QUANTIZE_BLUE_BITS); + png_size_t num_entries = ((png_size_t)1 << total_bits); + + png_ptr->palette_lookup = (png_bytep)png_calloc(png_ptr, + (png_uint_32)(num_entries * (sizeof (png_byte)))); + + distance = (png_bytep)png_malloc(png_ptr, (png_uint_32)(num_entries * + (sizeof (png_byte)))); + + memset(distance, 0xff, num_entries * (sizeof (png_byte))); + + for (i = 0; i < num_palette; i++) + { + int ir, ig, ib; + int r = (palette[i].red >> (8 - PNG_QUANTIZE_RED_BITS)); + int g = (palette[i].green >> (8 - PNG_QUANTIZE_GREEN_BITS)); + int b = (palette[i].blue >> (8 - PNG_QUANTIZE_BLUE_BITS)); + + for (ir = 0; ir < num_red; ir++) + { + /* int dr = abs(ir - r); */ + int dr = ((ir > r) ? ir - r : r - ir); + int index_r = (ir << (PNG_QUANTIZE_BLUE_BITS + + PNG_QUANTIZE_GREEN_BITS)); + + for (ig = 0; ig < num_green; ig++) + { + /* int dg = abs(ig - g); */ + int dg = ((ig > g) ? ig - g : g - ig); + int dt = dr + dg; + int dm = ((dr > dg) ? dr : dg); + int index_g = index_r | (ig << PNG_QUANTIZE_BLUE_BITS); + + for (ib = 0; ib < num_blue; ib++) + { + int d_index = index_g | ib; + /* int db = abs(ib - b); */ + int db = ((ib > b) ? ib - b : b - ib); + int dmax = ((dm > db) ? dm : db); + int d = dmax + dt + db; + + if (d < (int)distance[d_index]) + { + distance[d_index] = (png_byte)d; + png_ptr->palette_lookup[d_index] = (png_byte)i; + } + } + } + } + } + + png_free(png_ptr, distance); + } +} +#endif /* PNG_READ_QUANTIZE_SUPPORTED */ + +#ifdef PNG_READ_GAMMA_SUPPORTED +void PNGFAPI +png_set_gamma_fixed(png_structrp png_ptr, png_fixed_point scrn_gamma, + png_fixed_point file_gamma) +{ + png_debug(1, "in png_set_gamma_fixed"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + /* New in libpng-1.5.4 - reserve particular negative values as flags. */ + scrn_gamma = translate_gamma_flags(png_ptr, scrn_gamma, 1/*screen*/); + file_gamma = translate_gamma_flags(png_ptr, file_gamma, 0/*file*/); + + /* Checking the gamma values for being >0 was added in 1.5.4 along with the + * premultiplied alpha support; this actually hides an undocumented feature + * of the previous implementation which allowed gamma processing to be + * disabled in background handling. There is no evidence (so far) that this + * was being used; however, png_set_background itself accepted and must still + * accept '0' for the gamma value it takes, because it isn't always used. + * + * Since this is an API change (albeit a very minor one that removes an + * undocumented API feature) the following checks were only enabled in + * libpng-1.6.0. + */ + if (file_gamma <= 0) + png_error(png_ptr, "invalid file gamma in png_set_gamma"); + + if (scrn_gamma <= 0) + png_error(png_ptr, "invalid screen gamma in png_set_gamma"); + + /* Set the gamma values unconditionally - this overrides the value in the PNG + * file if a gAMA chunk was present. png_set_alpha_mode provides a + * different, easier, way to default the file gamma. + */ + png_ptr->colorspace.gamma = file_gamma; + png_ptr->colorspace.flags |= PNG_COLORSPACE_HAVE_GAMMA; + png_ptr->screen_gamma = scrn_gamma; +} + +# ifdef PNG_FLOATING_POINT_SUPPORTED +void PNGAPI +png_set_gamma(png_structrp png_ptr, double scrn_gamma, double file_gamma) +{ + png_set_gamma_fixed(png_ptr, convert_gamma_value(png_ptr, scrn_gamma), + convert_gamma_value(png_ptr, file_gamma)); +} +# endif /* FLOATING_POINT_SUPPORTED */ +#endif /* READ_GAMMA */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* Expand paletted images to RGB, expand grayscale images of + * less than 8-bit depth to 8-bit depth, and expand tRNS chunks + * to alpha channels. + */ +void PNGAPI +png_set_expand(png_structrp png_ptr) +{ + png_debug(1, "in png_set_expand"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + png_ptr->transformations |= (PNG_EXPAND | PNG_EXPAND_tRNS); +} + +/* GRR 19990627: the following three functions currently are identical + * to png_set_expand(). However, it is entirely reasonable that someone + * might wish to expand an indexed image to RGB but *not* expand a single, + * fully transparent palette entry to a full alpha channel--perhaps instead + * convert tRNS to the grayscale/RGB format (16-bit RGB value), or replace + * the transparent color with a particular RGB value, or drop tRNS entirely. + * IOW, a future version of the library may make the transformations flag + * a bit more fine-grained, with separate bits for each of these three + * functions. + * + * More to the point, these functions make it obvious what libpng will be + * doing, whereas "expand" can (and does) mean any number of things. + * + * GRP 20060307: In libpng-1.2.9, png_set_gray_1_2_4_to_8() was modified + * to expand only the sample depth but not to expand the tRNS to alpha + * and its name was changed to png_set_expand_gray_1_2_4_to_8(). + */ + +/* Expand paletted images to RGB. */ +void PNGAPI +png_set_palette_to_rgb(png_structrp png_ptr) +{ + png_debug(1, "in png_set_palette_to_rgb"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + png_ptr->transformations |= (PNG_EXPAND | PNG_EXPAND_tRNS); +} + +/* Expand grayscale images of less than 8-bit depth to 8 bits. */ +void PNGAPI +png_set_expand_gray_1_2_4_to_8(png_structrp png_ptr) +{ + png_debug(1, "in png_set_expand_gray_1_2_4_to_8"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + png_ptr->transformations |= PNG_EXPAND; +} + +/* Expand tRNS chunks to alpha channels. */ +void PNGAPI +png_set_tRNS_to_alpha(png_structrp png_ptr) +{ + png_debug(1, "in png_set_tRNS_to_alpha"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + png_ptr->transformations |= (PNG_EXPAND | PNG_EXPAND_tRNS); +} +#endif /* defined(PNG_READ_EXPAND_SUPPORTED) */ + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* Expand to 16-bit channels, expand the tRNS chunk too (because otherwise + * it may not work correctly.) + */ +void PNGAPI +png_set_expand_16(png_structrp png_ptr) +{ + png_debug(1, "in png_set_expand_16"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + png_ptr->transformations |= (PNG_EXPAND_16 | PNG_EXPAND | PNG_EXPAND_tRNS); +} +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +void PNGAPI +png_set_gray_to_rgb(png_structrp png_ptr) +{ + png_debug(1, "in png_set_gray_to_rgb"); + + if (!png_rtran_ok(png_ptr, 0)) + return; + + /* Because rgb must be 8 bits or more: */ + png_set_expand_gray_1_2_4_to_8(png_ptr); + png_ptr->transformations |= PNG_GRAY_TO_RGB; +} +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +void PNGFAPI +png_set_rgb_to_gray_fixed(png_structrp png_ptr, int error_action, + png_fixed_point red, png_fixed_point green) +{ + png_debug(1, "in png_set_rgb_to_gray"); + + /* Need the IHDR here because of the check on color_type below. */ + /* TODO: fix this */ + if (!png_rtran_ok(png_ptr, 1)) + return; + + switch(error_action) + { + case PNG_ERROR_ACTION_NONE: + png_ptr->transformations |= PNG_RGB_TO_GRAY; + break; + + case PNG_ERROR_ACTION_WARN: + png_ptr->transformations |= PNG_RGB_TO_GRAY_WARN; + break; + + case PNG_ERROR_ACTION_ERROR: + png_ptr->transformations |= PNG_RGB_TO_GRAY_ERR; + break; + + default: + png_error(png_ptr, "invalid error action to rgb_to_gray"); + break; + } + + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) +#ifdef PNG_READ_EXPAND_SUPPORTED + png_ptr->transformations |= PNG_EXPAND; +#else + { + /* Make this an error in 1.6 because otherwise the application may assume + * that it just worked and get a memory overwrite. + */ + png_error(png_ptr, + "Cannot do RGB_TO_GRAY without EXPAND_SUPPORTED"); + + /* png_ptr->transformations &= ~PNG_RGB_TO_GRAY; */ + } +#endif + { + if (red >= 0 && green >= 0 && red + green <= PNG_FP_1) + { + png_uint_16 red_int, green_int; + + /* NOTE: this calculation does not round, but this behavior is retained + * for consistency, the inaccuracy is very small. The code here always + * overwrites the coefficients, regardless of whether they have been + * defaulted or set already. + */ + red_int = (png_uint_16)(((png_uint_32)red*32768)/100000); + green_int = (png_uint_16)(((png_uint_32)green*32768)/100000); + + png_ptr->rgb_to_gray_red_coeff = red_int; + png_ptr->rgb_to_gray_green_coeff = green_int; + png_ptr->rgb_to_gray_coefficients_set = 1; + } + + else + { + if (red >= 0 && green >= 0) + png_app_warning(png_ptr, + "ignoring out of range rgb_to_gray coefficients"); + + /* Use the defaults, from the cHRM chunk if set, else the historical + * values which are close to the sRGB/HDTV/ITU-Rec 709 values. See + * png_do_rgb_to_gray for more discussion of the values. In this case + * the coefficients are not marked as 'set' and are not overwritten if + * something has already provided a default. + */ + if (png_ptr->rgb_to_gray_red_coeff == 0 && + png_ptr->rgb_to_gray_green_coeff == 0) + { + png_ptr->rgb_to_gray_red_coeff = 6968; + png_ptr->rgb_to_gray_green_coeff = 23434; + /* png_ptr->rgb_to_gray_blue_coeff = 2366; */ + } + } + } +} + +#ifdef PNG_FLOATING_POINT_SUPPORTED +/* Convert a RGB image to a grayscale of the same width. This allows us, + * for example, to convert a 24 bpp RGB image into an 8 bpp grayscale image. + */ + +void PNGAPI +png_set_rgb_to_gray(png_structrp png_ptr, int error_action, double red, + double green) +{ + png_set_rgb_to_gray_fixed(png_ptr, error_action, + png_fixed(png_ptr, red, "rgb to gray red coefficient"), + png_fixed(png_ptr, green, "rgb to gray green coefficient")); +} +#endif /* FLOATING POINT */ + +#endif /* RGB_TO_GRAY */ + +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ + defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) +void PNGAPI +png_set_read_user_transform_fn(png_structrp png_ptr, png_user_transform_ptr + read_user_transform_fn) +{ + png_debug(1, "in png_set_read_user_transform_fn"); + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED + png_ptr->transformations |= PNG_USER_TRANSFORM; + png_ptr->read_user_transform_fn = read_user_transform_fn; +#endif +} +#endif + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +#ifdef PNG_READ_GAMMA_SUPPORTED +/* In the case of gamma transformations only do transformations on images where + * the [file] gamma and screen_gamma are not close reciprocals, otherwise it + * slows things down slightly, and also needlessly introduces small errors. + */ +static int /* PRIVATE */ +png_gamma_threshold(png_fixed_point screen_gamma, png_fixed_point file_gamma) +{ + /* PNG_GAMMA_THRESHOLD is the threshold for performing gamma + * correction as a difference of the overall transform from 1.0 + * + * We want to compare the threshold with s*f - 1, if we get + * overflow here it is because of wacky gamma values so we + * turn on processing anyway. + */ + png_fixed_point gtest; + return !png_muldiv(>est, screen_gamma, file_gamma, PNG_FP_1) || + png_gamma_significant(gtest); +} +#endif + +/* Initialize everything needed for the read. This includes modifying + * the palette. + */ + +/*For the moment 'png_init_palette_transformations' and + * 'png_init_rgb_transformations' only do some flag canceling optimizations. + * The intent is that these two routines should have palette or rgb operations + * extracted from 'png_init_read_transformations'. + */ +static void /* PRIVATE */ +png_init_palette_transformations(png_structrp png_ptr) +{ + /* Called to handle the (input) palette case. In png_do_read_transformations + * the first step is to expand the palette if requested, so this code must + * take care to only make changes that are invariant with respect to the + * palette expansion, or only do them if there is no expansion. + * + * STRIP_ALPHA has already been handled in the caller (by setting num_trans + * to 0.) + */ + int input_has_alpha = 0; + int input_has_transparency = 0; + + if (png_ptr->num_trans > 0) + { + int i; + + /* Ignore if all the entries are opaque (unlikely!) */ + for (i=0; inum_trans; ++i) + if (png_ptr->trans_alpha[i] == 255) + continue; + else if (png_ptr->trans_alpha[i] == 0) + input_has_transparency = 1; + else + input_has_alpha = 1; + } + + /* If no alpha we can optimize. */ + if (!input_has_alpha) + { + /* Any alpha means background and associative alpha processing is + * required, however if the alpha is 0 or 1 throughout OPTIIMIZE_ALPHA + * and ENCODE_ALPHA are irrelevant. + */ + png_ptr->transformations &= ~PNG_ENCODE_ALPHA; + png_ptr->flags &= ~PNG_FLAG_OPTIMIZE_ALPHA; + + if (!input_has_transparency) + png_ptr->transformations &= ~(PNG_COMPOSE | PNG_BACKGROUND_EXPAND); + } + +#if defined(PNG_READ_EXPAND_SUPPORTED) && defined(PNG_READ_BACKGROUND_SUPPORTED) + /* png_set_background handling - deals with the complexity of whether the + * background color is in the file format or the screen format in the case + * where an 'expand' will happen. + */ + + /* The following code cannot be entered in the alpha pre-multiplication case + * because PNG_BACKGROUND_EXPAND is cancelled below. + */ + if ((png_ptr->transformations & PNG_BACKGROUND_EXPAND) && + (png_ptr->transformations & PNG_EXPAND)) + { + { + png_ptr->background.red = + png_ptr->palette[png_ptr->background.index].red; + png_ptr->background.green = + png_ptr->palette[png_ptr->background.index].green; + png_ptr->background.blue = + png_ptr->palette[png_ptr->background.index].blue; + +#ifdef PNG_READ_INVERT_ALPHA_SUPPORTED + if (png_ptr->transformations & PNG_INVERT_ALPHA) + { + if (!(png_ptr->transformations & PNG_EXPAND_tRNS)) + { + /* Invert the alpha channel (in tRNS) unless the pixels are + * going to be expanded, in which case leave it for later + */ + int i, istop = png_ptr->num_trans; + + for (i=0; itrans_alpha[i] = (png_byte)(255 - + png_ptr->trans_alpha[i]); + } + } +#endif /* PNG_READ_INVERT_ALPHA_SUPPORTED */ + } + } /* background expand and (therefore) no alpha association. */ +#endif /* PNG_READ_EXPAND_SUPPORTED && PNG_READ_BACKGROUND_SUPPORTED */ +} + +static void /* PRIVATE */ +png_init_rgb_transformations(png_structrp png_ptr) +{ + /* Added to libpng-1.5.4: check the color type to determine whether there + * is any alpha or transparency in the image and simply cancel the + * background and alpha mode stuff if there isn't. + */ + int input_has_alpha = (png_ptr->color_type & PNG_COLOR_MASK_ALPHA) != 0; + int input_has_transparency = png_ptr->num_trans > 0; + + /* If no alpha we can optimize. */ + if (!input_has_alpha) + { + /* Any alpha means background and associative alpha processing is + * required, however if the alpha is 0 or 1 throughout OPTIIMIZE_ALPHA + * and ENCODE_ALPHA are irrelevant. + */ +# ifdef PNG_READ_ALPHA_MODE_SUPPORTED + png_ptr->transformations &= ~PNG_ENCODE_ALPHA; + png_ptr->flags &= ~PNG_FLAG_OPTIMIZE_ALPHA; +# endif + + if (!input_has_transparency) + png_ptr->transformations &= ~(PNG_COMPOSE | PNG_BACKGROUND_EXPAND); + } + +#if defined(PNG_READ_EXPAND_SUPPORTED) && defined(PNG_READ_BACKGROUND_SUPPORTED) + /* png_set_background handling - deals with the complexity of whether the + * background color is in the file format or the screen format in the case + * where an 'expand' will happen. + */ + + /* The following code cannot be entered in the alpha pre-multiplication case + * because PNG_BACKGROUND_EXPAND is cancelled below. + */ + if ((png_ptr->transformations & PNG_BACKGROUND_EXPAND) && + (png_ptr->transformations & PNG_EXPAND) && + !(png_ptr->color_type & PNG_COLOR_MASK_COLOR)) + /* i.e., GRAY or GRAY_ALPHA */ + { + { + /* Expand background and tRNS chunks */ + int gray = png_ptr->background.gray; + int trans_gray = png_ptr->trans_color.gray; + + switch (png_ptr->bit_depth) + { + case 1: + gray *= 0xff; + trans_gray *= 0xff; + break; + + case 2: + gray *= 0x55; + trans_gray *= 0x55; + break; + + case 4: + gray *= 0x11; + trans_gray *= 0x11; + break; + + default: + + case 8: + /* FALL THROUGH (Already 8 bits) */ + + case 16: + /* Already a full 16 bits */ + break; + } + + png_ptr->background.red = png_ptr->background.green = + png_ptr->background.blue = (png_uint_16)gray; + + if (!(png_ptr->transformations & PNG_EXPAND_tRNS)) + { + png_ptr->trans_color.red = png_ptr->trans_color.green = + png_ptr->trans_color.blue = (png_uint_16)trans_gray; + } + } + } /* background expand and (therefore) no alpha association. */ +#endif /* PNG_READ_EXPAND_SUPPORTED && PNG_READ_BACKGROUND_SUPPORTED */ +} + +void /* PRIVATE */ +png_init_read_transformations(png_structrp png_ptr) +{ + png_debug(1, "in png_init_read_transformations"); + + /* This internal function is called from png_read_start_row in pngrutil.c + * and it is called before the 'rowbytes' calculation is done, so the code + * in here can change or update the transformations flags. + * + * First do updates that do not depend on the details of the PNG image data + * being processed. + */ + +#ifdef PNG_READ_GAMMA_SUPPORTED + /* Prior to 1.5.4 these tests were performed from png_set_gamma, 1.5.4 adds + * png_set_alpha_mode and this is another source for a default file gamma so + * the test needs to be performed later - here. In addition prior to 1.5.4 + * the tests were repeated for the PALETTE color type here - this is no + * longer necessary (and doesn't seem to have been necessary before.) + */ + { + /* The following temporary indicates if overall gamma correction is + * required. + */ + int gamma_correction = 0; + + if (png_ptr->colorspace.gamma != 0) /* has been set */ + { + if (png_ptr->screen_gamma != 0) /* screen set too */ + gamma_correction = png_gamma_threshold(png_ptr->colorspace.gamma, + png_ptr->screen_gamma); + + else + /* Assume the output matches the input; a long time default behavior + * of libpng, although the standard has nothing to say about this. + */ + png_ptr->screen_gamma = png_reciprocal(png_ptr->colorspace.gamma); + } + + else if (png_ptr->screen_gamma != 0) + /* The converse - assume the file matches the screen, note that this + * perhaps undesireable default can (from 1.5.4) be changed by calling + * png_set_alpha_mode (even if the alpha handling mode isn't required + * or isn't changed from the default.) + */ + png_ptr->colorspace.gamma = png_reciprocal(png_ptr->screen_gamma); + + else /* neither are set */ + /* Just in case the following prevents any processing - file and screen + * are both assumed to be linear and there is no way to introduce a + * third gamma value other than png_set_background with 'UNIQUE', and, + * prior to 1.5.4 + */ + png_ptr->screen_gamma = png_ptr->colorspace.gamma = PNG_FP_1; + + /* We have a gamma value now. */ + png_ptr->colorspace.flags |= PNG_COLORSPACE_HAVE_GAMMA; + + /* Now turn the gamma transformation on or off as appropriate. Notice + * that PNG_GAMMA just refers to the file->screen correction. Alpha + * composition may independently cause gamma correction because it needs + * linear data (e.g. if the file has a gAMA chunk but the screen gamma + * hasn't been specified.) In any case this flag may get turned off in + * the code immediately below if the transform can be handled outside the + * row loop. + */ + if (gamma_correction) + png_ptr->transformations |= PNG_GAMMA; + + else + png_ptr->transformations &= ~PNG_GAMMA; + } +#endif + + /* Certain transformations have the effect of preventing other + * transformations that happen afterward in png_do_read_transformations, + * resolve the interdependencies here. From the code of + * png_do_read_transformations the order is: + * + * 1) PNG_EXPAND (including PNG_EXPAND_tRNS) + * 2) PNG_STRIP_ALPHA (if no compose) + * 3) PNG_RGB_TO_GRAY + * 4) PNG_GRAY_TO_RGB iff !PNG_BACKGROUND_IS_GRAY + * 5) PNG_COMPOSE + * 6) PNG_GAMMA + * 7) PNG_STRIP_ALPHA (if compose) + * 8) PNG_ENCODE_ALPHA + * 9) PNG_SCALE_16_TO_8 + * 10) PNG_16_TO_8 + * 11) PNG_QUANTIZE (converts to palette) + * 12) PNG_EXPAND_16 + * 13) PNG_GRAY_TO_RGB iff PNG_BACKGROUND_IS_GRAY + * 14) PNG_INVERT_MONO + * 15) PNG_SHIFT + * 16) PNG_PACK + * 17) PNG_BGR + * 18) PNG_PACKSWAP + * 19) PNG_FILLER (includes PNG_ADD_ALPHA) + * 20) PNG_INVERT_ALPHA + * 21) PNG_SWAP_ALPHA + * 22) PNG_SWAP_BYTES + * 23) PNG_USER_TRANSFORM [must be last] + */ +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED + if ((png_ptr->transformations & PNG_STRIP_ALPHA) && + !(png_ptr->transformations & PNG_COMPOSE)) + { + /* Stripping the alpha channel happens immediately after the 'expand' + * transformations, before all other transformation, so it cancels out + * the alpha handling. It has the side effect negating the effect of + * PNG_EXPAND_tRNS too: + */ + png_ptr->transformations &= ~(PNG_BACKGROUND_EXPAND | PNG_ENCODE_ALPHA | + PNG_EXPAND_tRNS); + png_ptr->flags &= ~PNG_FLAG_OPTIMIZE_ALPHA; + + /* Kill the tRNS chunk itself too. Prior to 1.5.4 this did not happen + * so transparency information would remain just so long as it wasn't + * expanded. This produces unexpected API changes if the set of things + * that do PNG_EXPAND_tRNS changes (perfectly possible given the + * documentation - which says ask for what you want, accept what you + * get.) This makes the behavior consistent from 1.5.4: + */ + png_ptr->num_trans = 0; + } +#endif /* STRIP_ALPHA supported, no COMPOSE */ + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + /* If the screen gamma is about 1.0 then the OPTIMIZE_ALPHA and ENCODE_ALPHA + * settings will have no effect. + */ + if (!png_gamma_significant(png_ptr->screen_gamma)) + { + png_ptr->transformations &= ~PNG_ENCODE_ALPHA; + png_ptr->flags &= ~PNG_FLAG_OPTIMIZE_ALPHA; + } +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED + /* Make sure the coefficients for the rgb to gray conversion are set + * appropriately. + */ + if (png_ptr->transformations & PNG_RGB_TO_GRAY) + png_colorspace_set_rgb_coefficients(png_ptr); +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +#if defined(PNG_READ_EXPAND_SUPPORTED) && defined(PNG_READ_BACKGROUND_SUPPORTED) + /* Detect gray background and attempt to enable optimization for + * gray --> RGB case. + * + * Note: if PNG_BACKGROUND_EXPAND is set and color_type is either RGB or + * RGB_ALPHA (in which case need_expand is superfluous anyway), the + * background color might actually be gray yet not be flagged as such. + * This is not a problem for the current code, which uses + * PNG_BACKGROUND_IS_GRAY only to decide when to do the + * png_do_gray_to_rgb() transformation. + * + * TODO: this code needs to be revised to avoid the complexity and + * interdependencies. The color type of the background should be recorded in + * png_set_background, along with the bit depth, then the code has a record + * of exactly what color space the background is currently in. + */ + if (png_ptr->transformations & PNG_BACKGROUND_EXPAND) + { + /* PNG_BACKGROUND_EXPAND: the background is in the file color space, so if + * the file was grayscale the background value is gray. + */ + if (!(png_ptr->color_type & PNG_COLOR_MASK_COLOR)) + png_ptr->mode |= PNG_BACKGROUND_IS_GRAY; + } + + else if (png_ptr->transformations & PNG_COMPOSE) + { + /* PNG_COMPOSE: png_set_background was called with need_expand false, + * so the color is in the color space of the output or png_set_alpha_mode + * was called and the color is black. Ignore RGB_TO_GRAY because that + * happens before GRAY_TO_RGB. + */ + if (png_ptr->transformations & PNG_GRAY_TO_RGB) + { + if (png_ptr->background.red == png_ptr->background.green && + png_ptr->background.red == png_ptr->background.blue) + { + png_ptr->mode |= PNG_BACKGROUND_IS_GRAY; + png_ptr->background.gray = png_ptr->background.red; + } + } + } +#endif /* PNG_READ_EXPAND_SUPPORTED && PNG_READ_BACKGROUND_SUPPORTED */ +#endif /* PNG_READ_GRAY_TO_RGB_SUPPORTED */ + + /* For indexed PNG data (PNG_COLOR_TYPE_PALETTE) many of the transformations + * can be performed directly on the palette, and some (such as rgb to gray) + * can be optimized inside the palette. This is particularly true of the + * composite (background and alpha) stuff, which can be pretty much all done + * in the palette even if the result is expanded to RGB or gray afterward. + * + * NOTE: this is Not Yet Implemented, the code behaves as in 1.5.1 and + * earlier and the palette stuff is actually handled on the first row. This + * leads to the reported bug that the palette returned by png_get_PLTE is not + * updated. + */ + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + png_init_palette_transformations(png_ptr); + + else + png_init_rgb_transformations(png_ptr); + +#if defined(PNG_READ_BACKGROUND_SUPPORTED) && \ + defined(PNG_READ_EXPAND_16_SUPPORTED) + if ((png_ptr->transformations & PNG_EXPAND_16) && + (png_ptr->transformations & PNG_COMPOSE) && + !(png_ptr->transformations & PNG_BACKGROUND_EXPAND) && + png_ptr->bit_depth != 16) + { + /* TODO: fix this. Because the expand_16 operation is after the compose + * handling the background color must be 8, not 16, bits deep, but the + * application will supply a 16-bit value so reduce it here. + * + * The PNG_BACKGROUND_EXPAND code above does not expand to 16 bits at + * present, so that case is ok (until do_expand_16 is moved.) + * + * NOTE: this discards the low 16 bits of the user supplied background + * color, but until expand_16 works properly there is no choice! + */ +# define CHOP(x) (x)=((png_uint_16)PNG_DIV257(x)) + CHOP(png_ptr->background.red); + CHOP(png_ptr->background.green); + CHOP(png_ptr->background.blue); + CHOP(png_ptr->background.gray); +# undef CHOP + } +#endif /* PNG_READ_BACKGROUND_SUPPORTED && PNG_READ_EXPAND_16_SUPPORTED */ + +#if defined(PNG_READ_BACKGROUND_SUPPORTED) && \ + (defined(PNG_READ_SCALE_16_TO_8_SUPPORTED) || \ + defined(PNG_READ_STRIP_16_TO_8_SUPPORTED)) + if ((png_ptr->transformations & (PNG_16_TO_8|PNG_SCALE_16_TO_8)) && + (png_ptr->transformations & PNG_COMPOSE) && + !(png_ptr->transformations & PNG_BACKGROUND_EXPAND) && + png_ptr->bit_depth == 16) + { + /* On the other hand, if a 16-bit file is to be reduced to 8-bits per + * component this will also happen after PNG_COMPOSE and so the background + * color must be pre-expanded here. + * + * TODO: fix this too. + */ + png_ptr->background.red = (png_uint_16)(png_ptr->background.red * 257); + png_ptr->background.green = + (png_uint_16)(png_ptr->background.green * 257); + png_ptr->background.blue = (png_uint_16)(png_ptr->background.blue * 257); + png_ptr->background.gray = (png_uint_16)(png_ptr->background.gray * 257); + } +#endif + + /* NOTE: below 'PNG_READ_ALPHA_MODE_SUPPORTED' is presumed to also enable the + * background support (see the comments in scripts/pnglibconf.dfa), this + * allows pre-multiplication of the alpha channel to be implemented as + * compositing on black. This is probably sub-optimal and has been done in + * 1.5.4 betas simply to enable external critique and testing (i.e. to + * implement the new API quickly, without lots of internal changes.) + */ + +#ifdef PNG_READ_GAMMA_SUPPORTED +# ifdef PNG_READ_BACKGROUND_SUPPORTED + /* Includes ALPHA_MODE */ + png_ptr->background_1 = png_ptr->background; +# endif + + /* This needs to change - in the palette image case a whole set of tables are + * built when it would be quicker to just calculate the correct value for + * each palette entry directly. Also, the test is too tricky - why check + * PNG_RGB_TO_GRAY if PNG_GAMMA is not set? The answer seems to be that + * PNG_GAMMA is cancelled even if the gamma is known? The test excludes the + * PNG_COMPOSE case, so apparently if there is no *overall* gamma correction + * the gamma tables will not be built even if composition is required on a + * gamma encoded value. + * + * In 1.5.4 this is addressed below by an additional check on the individual + * file gamma - if it is not 1.0 both RGB_TO_GRAY and COMPOSE need the + * tables. + */ + if ((png_ptr->transformations & PNG_GAMMA) + || ((png_ptr->transformations & PNG_RGB_TO_GRAY) + && (png_gamma_significant(png_ptr->colorspace.gamma) || + png_gamma_significant(png_ptr->screen_gamma))) + || ((png_ptr->transformations & PNG_COMPOSE) + && (png_gamma_significant(png_ptr->colorspace.gamma) + || png_gamma_significant(png_ptr->screen_gamma) +# ifdef PNG_READ_BACKGROUND_SUPPORTED + || (png_ptr->background_gamma_type == PNG_BACKGROUND_GAMMA_UNIQUE + && png_gamma_significant(png_ptr->background_gamma)) +# endif + )) || ((png_ptr->transformations & PNG_ENCODE_ALPHA) + && png_gamma_significant(png_ptr->screen_gamma)) + ) + { + png_build_gamma_table(png_ptr, png_ptr->bit_depth); + +#ifdef PNG_READ_BACKGROUND_SUPPORTED + if (png_ptr->transformations & PNG_COMPOSE) + { + /* Issue a warning about this combination: because RGB_TO_GRAY is + * optimized to do the gamma transform if present yet do_background has + * to do the same thing if both options are set a + * double-gamma-correction happens. This is true in all versions of + * libpng to date. + */ + if (png_ptr->transformations & PNG_RGB_TO_GRAY) + png_warning(png_ptr, + "libpng does not support gamma+background+rgb_to_gray"); + + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + { + /* We don't get to here unless there is a tRNS chunk with non-opaque + * entries - see the checking code at the start of this function. + */ + png_color back, back_1; + png_colorp palette = png_ptr->palette; + int num_palette = png_ptr->num_palette; + int i; + if (png_ptr->background_gamma_type == PNG_BACKGROUND_GAMMA_FILE) + { + + back.red = png_ptr->gamma_table[png_ptr->background.red]; + back.green = png_ptr->gamma_table[png_ptr->background.green]; + back.blue = png_ptr->gamma_table[png_ptr->background.blue]; + + back_1.red = png_ptr->gamma_to_1[png_ptr->background.red]; + back_1.green = png_ptr->gamma_to_1[png_ptr->background.green]; + back_1.blue = png_ptr->gamma_to_1[png_ptr->background.blue]; + } + else + { + png_fixed_point g, gs; + + switch (png_ptr->background_gamma_type) + { + case PNG_BACKGROUND_GAMMA_SCREEN: + g = (png_ptr->screen_gamma); + gs = PNG_FP_1; + break; + + case PNG_BACKGROUND_GAMMA_FILE: + g = png_reciprocal(png_ptr->colorspace.gamma); + gs = png_reciprocal2(png_ptr->colorspace.gamma, + png_ptr->screen_gamma); + break; + + case PNG_BACKGROUND_GAMMA_UNIQUE: + g = png_reciprocal(png_ptr->background_gamma); + gs = png_reciprocal2(png_ptr->background_gamma, + png_ptr->screen_gamma); + break; + default: + g = PNG_FP_1; /* back_1 */ + gs = PNG_FP_1; /* back */ + break; + } + + if (png_gamma_significant(gs)) + { + back.red = png_gamma_8bit_correct(png_ptr->background.red, + gs); + back.green = png_gamma_8bit_correct(png_ptr->background.green, + gs); + back.blue = png_gamma_8bit_correct(png_ptr->background.blue, + gs); + } + + else + { + back.red = (png_byte)png_ptr->background.red; + back.green = (png_byte)png_ptr->background.green; + back.blue = (png_byte)png_ptr->background.blue; + } + + if (png_gamma_significant(g)) + { + back_1.red = png_gamma_8bit_correct(png_ptr->background.red, + g); + back_1.green = png_gamma_8bit_correct( + png_ptr->background.green, g); + back_1.blue = png_gamma_8bit_correct(png_ptr->background.blue, + g); + } + + else + { + back_1.red = (png_byte)png_ptr->background.red; + back_1.green = (png_byte)png_ptr->background.green; + back_1.blue = (png_byte)png_ptr->background.blue; + } + } + + for (i = 0; i < num_palette; i++) + { + if (i < (int)png_ptr->num_trans && + png_ptr->trans_alpha[i] != 0xff) + { + if (png_ptr->trans_alpha[i] == 0) + { + palette[i] = back; + } + else /* if (png_ptr->trans_alpha[i] != 0xff) */ + { + png_byte v, w; + + v = png_ptr->gamma_to_1[palette[i].red]; + png_composite(w, v, png_ptr->trans_alpha[i], back_1.red); + palette[i].red = png_ptr->gamma_from_1[w]; + + v = png_ptr->gamma_to_1[palette[i].green]; + png_composite(w, v, png_ptr->trans_alpha[i], back_1.green); + palette[i].green = png_ptr->gamma_from_1[w]; + + v = png_ptr->gamma_to_1[palette[i].blue]; + png_composite(w, v, png_ptr->trans_alpha[i], back_1.blue); + palette[i].blue = png_ptr->gamma_from_1[w]; + } + } + else + { + palette[i].red = png_ptr->gamma_table[palette[i].red]; + palette[i].green = png_ptr->gamma_table[palette[i].green]; + palette[i].blue = png_ptr->gamma_table[palette[i].blue]; + } + } + + /* Prevent the transformations being done again. + * + * NOTE: this is highly dubious; it removes the transformations in + * place. This seems inconsistent with the general treatment of the + * transformations elsewhere. + */ + png_ptr->transformations &= ~(PNG_COMPOSE | PNG_GAMMA); + } /* color_type == PNG_COLOR_TYPE_PALETTE */ + + /* if (png_ptr->background_gamma_type!=PNG_BACKGROUND_GAMMA_UNKNOWN) */ + else /* color_type != PNG_COLOR_TYPE_PALETTE */ + { + int gs_sig, g_sig; + png_fixed_point g = PNG_FP_1; /* Correction to linear */ + png_fixed_point gs = PNG_FP_1; /* Correction to screen */ + + switch (png_ptr->background_gamma_type) + { + case PNG_BACKGROUND_GAMMA_SCREEN: + g = png_ptr->screen_gamma; + /* gs = PNG_FP_1; */ + break; + + case PNG_BACKGROUND_GAMMA_FILE: + g = png_reciprocal(png_ptr->colorspace.gamma); + gs = png_reciprocal2(png_ptr->colorspace.gamma, + png_ptr->screen_gamma); + break; + + case PNG_BACKGROUND_GAMMA_UNIQUE: + g = png_reciprocal(png_ptr->background_gamma); + gs = png_reciprocal2(png_ptr->background_gamma, + png_ptr->screen_gamma); + break; + + default: + png_error(png_ptr, "invalid background gamma type"); + } + + g_sig = png_gamma_significant(g); + gs_sig = png_gamma_significant(gs); + + if (g_sig) + png_ptr->background_1.gray = png_gamma_correct(png_ptr, + png_ptr->background.gray, g); + + if (gs_sig) + png_ptr->background.gray = png_gamma_correct(png_ptr, + png_ptr->background.gray, gs); + + if ((png_ptr->background.red != png_ptr->background.green) || + (png_ptr->background.red != png_ptr->background.blue) || + (png_ptr->background.red != png_ptr->background.gray)) + { + /* RGB or RGBA with color background */ + if (g_sig) + { + png_ptr->background_1.red = png_gamma_correct(png_ptr, + png_ptr->background.red, g); + + png_ptr->background_1.green = png_gamma_correct(png_ptr, + png_ptr->background.green, g); + + png_ptr->background_1.blue = png_gamma_correct(png_ptr, + png_ptr->background.blue, g); + } + + if (gs_sig) + { + png_ptr->background.red = png_gamma_correct(png_ptr, + png_ptr->background.red, gs); + + png_ptr->background.green = png_gamma_correct(png_ptr, + png_ptr->background.green, gs); + + png_ptr->background.blue = png_gamma_correct(png_ptr, + png_ptr->background.blue, gs); + } + } + + else + { + /* GRAY, GRAY ALPHA, RGB, or RGBA with gray background */ + png_ptr->background_1.red = png_ptr->background_1.green + = png_ptr->background_1.blue = png_ptr->background_1.gray; + + png_ptr->background.red = png_ptr->background.green + = png_ptr->background.blue = png_ptr->background.gray; + } + + /* The background is now in screen gamma: */ + png_ptr->background_gamma_type = PNG_BACKGROUND_GAMMA_SCREEN; + } /* color_type != PNG_COLOR_TYPE_PALETTE */ + }/* png_ptr->transformations & PNG_BACKGROUND */ + + else + /* Transformation does not include PNG_BACKGROUND */ +#endif /* PNG_READ_BACKGROUND_SUPPORTED */ + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED + /* RGB_TO_GRAY needs to have non-gamma-corrected values! */ + && ((png_ptr->transformations & PNG_EXPAND) == 0 || + (png_ptr->transformations & PNG_RGB_TO_GRAY) == 0) +#endif + ) + { + png_colorp palette = png_ptr->palette; + int num_palette = png_ptr->num_palette; + int i; + + /* NOTE: there are other transformations that should probably be in + * here too. + */ + for (i = 0; i < num_palette; i++) + { + palette[i].red = png_ptr->gamma_table[palette[i].red]; + palette[i].green = png_ptr->gamma_table[palette[i].green]; + palette[i].blue = png_ptr->gamma_table[palette[i].blue]; + } + + /* Done the gamma correction. */ + png_ptr->transformations &= ~PNG_GAMMA; + } /* color_type == PALETTE && !PNG_BACKGROUND transformation */ + } +#ifdef PNG_READ_BACKGROUND_SUPPORTED + else +#endif +#endif /* PNG_READ_GAMMA_SUPPORTED */ + +#ifdef PNG_READ_BACKGROUND_SUPPORTED + /* No GAMMA transformation (see the hanging else 4 lines above) */ + if ((png_ptr->transformations & PNG_COMPOSE) && + (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE)) + { + int i; + int istop = (int)png_ptr->num_trans; + png_color back; + png_colorp palette = png_ptr->palette; + + back.red = (png_byte)png_ptr->background.red; + back.green = (png_byte)png_ptr->background.green; + back.blue = (png_byte)png_ptr->background.blue; + + for (i = 0; i < istop; i++) + { + if (png_ptr->trans_alpha[i] == 0) + { + palette[i] = back; + } + + else if (png_ptr->trans_alpha[i] != 0xff) + { + /* The png_composite() macro is defined in png.h */ + png_composite(palette[i].red, palette[i].red, + png_ptr->trans_alpha[i], back.red); + + png_composite(palette[i].green, palette[i].green, + png_ptr->trans_alpha[i], back.green); + + png_composite(palette[i].blue, palette[i].blue, + png_ptr->trans_alpha[i], back.blue); + } + } + + png_ptr->transformations &= ~PNG_COMPOSE; + } +#endif /* PNG_READ_BACKGROUND_SUPPORTED */ + +#ifdef PNG_READ_SHIFT_SUPPORTED + if ((png_ptr->transformations & PNG_SHIFT) && + !(png_ptr->transformations & PNG_EXPAND) && + (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE)) + { + int i; + int istop = png_ptr->num_palette; + int shift = 8 - png_ptr->sig_bit.red; + + png_ptr->transformations &= ~PNG_SHIFT; + + /* significant bits can be in the range 1 to 7 for a meaninful result, if + * the number of significant bits is 0 then no shift is done (this is an + * error condition which is silently ignored.) + */ + if (shift > 0 && shift < 8) for (i=0; ipalette[i].red; + + component >>= shift; + png_ptr->palette[i].red = (png_byte)component; + } + + shift = 8 - png_ptr->sig_bit.green; + if (shift > 0 && shift < 8) for (i=0; ipalette[i].green; + + component >>= shift; + png_ptr->palette[i].green = (png_byte)component; + } + + shift = 8 - png_ptr->sig_bit.blue; + if (shift > 0 && shift < 8) for (i=0; ipalette[i].blue; + + component >>= shift; + png_ptr->palette[i].blue = (png_byte)component; + } + } +#endif /* PNG_READ_SHIFT_SUPPORTED */ +} + +/* Modify the info structure to reflect the transformations. The + * info should be updated so a PNG file could be written with it, + * assuming the transformations result in valid PNG data. + */ +void /* PRIVATE */ +png_read_transform_info(png_structrp png_ptr, png_inforp info_ptr) +{ + png_debug(1, "in png_read_transform_info"); + +#ifdef PNG_READ_EXPAND_SUPPORTED + if (png_ptr->transformations & PNG_EXPAND) + { + if (info_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + { + /* This check must match what actually happens in + * png_do_expand_palette; if it ever checks the tRNS chunk to see if + * it is all opaque we must do the same (at present it does not.) + */ + if (png_ptr->num_trans > 0) + info_ptr->color_type = PNG_COLOR_TYPE_RGB_ALPHA; + + else + info_ptr->color_type = PNG_COLOR_TYPE_RGB; + + info_ptr->bit_depth = 8; + info_ptr->num_trans = 0; + } + else + { + if (png_ptr->num_trans) + { + if (png_ptr->transformations & PNG_EXPAND_tRNS) + info_ptr->color_type |= PNG_COLOR_MASK_ALPHA; + } + if (info_ptr->bit_depth < 8) + info_ptr->bit_depth = 8; + + info_ptr->num_trans = 0; + } + } +#endif + +#if defined(PNG_READ_BACKGROUND_SUPPORTED) ||\ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) + /* The following is almost certainly wrong unless the background value is in + * the screen space! + */ + if (png_ptr->transformations & PNG_COMPOSE) + info_ptr->background = png_ptr->background; +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED + /* The following used to be conditional on PNG_GAMMA (prior to 1.5.4), + * however it seems that the code in png_init_read_transformations, which has + * been called before this from png_read_update_info->png_read_start_row + * sometimes does the gamma transform and cancels the flag. + * + * TODO: this looks wrong; the info_ptr should end up with a gamma equal to + * the screen_gamma value. The following probably results in weirdness if + * the info_ptr is used by the app after the rows have been read. + */ + info_ptr->colorspace.gamma = png_ptr->colorspace.gamma; +#endif + + if (info_ptr->bit_depth == 16) + { +# ifdef PNG_READ_16BIT_SUPPORTED +# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + if (png_ptr->transformations & PNG_SCALE_16_TO_8) + info_ptr->bit_depth = 8; +# endif + +# ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED + if (png_ptr->transformations & PNG_16_TO_8) + info_ptr->bit_depth = 8; +# endif + +# else + /* No 16 bit support: force chopping 16-bit input down to 8, in this case + * the app program can chose if both APIs are available by setting the + * correct scaling to use. + */ +# ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED + /* For compatibility with previous versions use the strip method by + * default. This code works because if PNG_SCALE_16_TO_8 is already + * set the code below will do that in preference to the chop. + */ + png_ptr->transformations |= PNG_16_TO_8; + info_ptr->bit_depth = 8; +# else + +# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + png_ptr->transformations |= PNG_SCALE_16_TO_8; + info_ptr->bit_depth = 8; +# else + + CONFIGURATION ERROR: you must enable at least one 16 to 8 method +# endif +# endif +#endif /* !READ_16BIT_SUPPORTED */ + } + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED + if (png_ptr->transformations & PNG_GRAY_TO_RGB) + info_ptr->color_type = (png_byte)(info_ptr->color_type | + PNG_COLOR_MASK_COLOR); +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED + if (png_ptr->transformations & PNG_RGB_TO_GRAY) + info_ptr->color_type = (png_byte)(info_ptr->color_type & + ~PNG_COLOR_MASK_COLOR); +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED + if (png_ptr->transformations & PNG_QUANTIZE) + { + if (((info_ptr->color_type == PNG_COLOR_TYPE_RGB) || + (info_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA)) && + png_ptr->palette_lookup && info_ptr->bit_depth == 8) + { + info_ptr->color_type = PNG_COLOR_TYPE_PALETTE; + } + } +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED + if (png_ptr->transformations & PNG_EXPAND_16 && info_ptr->bit_depth == 8 && + info_ptr->color_type != PNG_COLOR_TYPE_PALETTE) + { + info_ptr->bit_depth = 16; + } +#endif + +#ifdef PNG_READ_PACK_SUPPORTED + if ((png_ptr->transformations & PNG_PACK) && (info_ptr->bit_depth < 8)) + info_ptr->bit_depth = 8; +#endif + + if (info_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + info_ptr->channels = 1; + + else if (info_ptr->color_type & PNG_COLOR_MASK_COLOR) + info_ptr->channels = 3; + + else + info_ptr->channels = 1; + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED + if (png_ptr->transformations & PNG_STRIP_ALPHA) + { + info_ptr->color_type = (png_byte)(info_ptr->color_type & + ~PNG_COLOR_MASK_ALPHA); + info_ptr->num_trans = 0; + } +#endif + + if (info_ptr->color_type & PNG_COLOR_MASK_ALPHA) + info_ptr->channels++; + +#ifdef PNG_READ_FILLER_SUPPORTED + /* STRIP_ALPHA and FILLER allowed: MASK_ALPHA bit stripped above */ + if ((png_ptr->transformations & PNG_FILLER) && + ((info_ptr->color_type == PNG_COLOR_TYPE_RGB) || + (info_ptr->color_type == PNG_COLOR_TYPE_GRAY))) + { + info_ptr->channels++; + /* If adding a true alpha channel not just filler */ + if (png_ptr->transformations & PNG_ADD_ALPHA) + info_ptr->color_type |= PNG_COLOR_MASK_ALPHA; + } +#endif + +#if defined(PNG_USER_TRANSFORM_PTR_SUPPORTED) && \ +defined(PNG_READ_USER_TRANSFORM_SUPPORTED) + if (png_ptr->transformations & PNG_USER_TRANSFORM) + { + if (info_ptr->bit_depth < png_ptr->user_transform_depth) + info_ptr->bit_depth = png_ptr->user_transform_depth; + + if (info_ptr->channels < png_ptr->user_transform_channels) + info_ptr->channels = png_ptr->user_transform_channels; + } +#endif + + info_ptr->pixel_depth = (png_byte)(info_ptr->channels * + info_ptr->bit_depth); + + info_ptr->rowbytes = PNG_ROWBYTES(info_ptr->pixel_depth, info_ptr->width); + + /* Adding in 1.5.4: cache the above value in png_struct so that we can later + * check in png_rowbytes that the user buffer won't get overwritten. Note + * that the field is not always set - if png_read_update_info isn't called + * the application has to either not do any transforms or get the calculation + * right itself. + */ + png_ptr->info_rowbytes = info_ptr->rowbytes; + +#ifndef PNG_READ_EXPAND_SUPPORTED + if (png_ptr) + return; +#endif +} + +/* Transform the row. The order of transformations is significant, + * and is very touchy. If you add a transformation, take care to + * decide how it fits in with the other transformations here. + */ +void /* PRIVATE */ +png_do_read_transformations(png_structrp png_ptr, png_row_infop row_info) +{ + png_debug(1, "in png_do_read_transformations"); + + if (png_ptr->row_buf == NULL) + { + /* Prior to 1.5.4 this output row/pass where the NULL pointer is, but this + * error is incredibly rare and incredibly easy to debug without this + * information. + */ + png_error(png_ptr, "NULL row buffer"); + } + + /* The following is debugging; prior to 1.5.4 the code was never compiled in; + * in 1.5.4 PNG_FLAG_DETECT_UNINITIALIZED was added and the macro + * PNG_WARN_UNINITIALIZED_ROW removed. In 1.6 the new flag is set only for + * all transformations, however in practice the ROW_INIT always gets done on + * demand, if necessary. + */ + if ((png_ptr->flags & PNG_FLAG_DETECT_UNINITIALIZED) != 0 && + !(png_ptr->flags & PNG_FLAG_ROW_INIT)) + { + /* Application has failed to call either png_read_start_image() or + * png_read_update_info() after setting transforms that expand pixels. + * This check added to libpng-1.2.19 (but not enabled until 1.5.4). + */ + png_error(png_ptr, "Uninitialized row"); + } + +#ifdef PNG_READ_EXPAND_SUPPORTED + if (png_ptr->transformations & PNG_EXPAND) + { + if (row_info->color_type == PNG_COLOR_TYPE_PALETTE) + { + png_do_expand_palette(row_info, png_ptr->row_buf + 1, + png_ptr->palette, png_ptr->trans_alpha, png_ptr->num_trans); + } + + else + { + if (png_ptr->num_trans && + (png_ptr->transformations & PNG_EXPAND_tRNS)) + png_do_expand(row_info, png_ptr->row_buf + 1, + &(png_ptr->trans_color)); + + else + png_do_expand(row_info, png_ptr->row_buf + 1, + NULL); + } + } +#endif + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED + if ((png_ptr->transformations & PNG_STRIP_ALPHA) && + !(png_ptr->transformations & PNG_COMPOSE) && + (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA || + row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA)) + png_do_strip_channel(row_info, png_ptr->row_buf + 1, + 0 /* at_start == false, because SWAP_ALPHA happens later */); +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED + if (png_ptr->transformations & PNG_RGB_TO_GRAY) + { + int rgb_error = + png_do_rgb_to_gray(png_ptr, row_info, + png_ptr->row_buf + 1); + + if (rgb_error) + { + png_ptr->rgb_to_gray_status=1; + if ((png_ptr->transformations & PNG_RGB_TO_GRAY) == + PNG_RGB_TO_GRAY_WARN) + png_warning(png_ptr, "png_do_rgb_to_gray found nongray pixel"); + + if ((png_ptr->transformations & PNG_RGB_TO_GRAY) == + PNG_RGB_TO_GRAY_ERR) + png_error(png_ptr, "png_do_rgb_to_gray found nongray pixel"); + } + } +#endif + +/* From Andreas Dilger e-mail to png-implement, 26 March 1998: + * + * In most cases, the "simple transparency" should be done prior to doing + * gray-to-RGB, or you will have to test 3x as many bytes to check if a + * pixel is transparent. You would also need to make sure that the + * transparency information is upgraded to RGB. + * + * To summarize, the current flow is: + * - Gray + simple transparency -> compare 1 or 2 gray bytes and composite + * with background "in place" if transparent, + * convert to RGB if necessary + * - Gray + alpha -> composite with gray background and remove alpha bytes, + * convert to RGB if necessary + * + * To support RGB backgrounds for gray images we need: + * - Gray + simple transparency -> convert to RGB + simple transparency, + * compare 3 or 6 bytes and composite with + * background "in place" if transparent + * (3x compare/pixel compared to doing + * composite with gray bkgrnd) + * - Gray + alpha -> convert to RGB + alpha, composite with background and + * remove alpha bytes (3x float + * operations/pixel compared with composite + * on gray background) + * + * Greg's change will do this. The reason it wasn't done before is for + * performance, as this increases the per-pixel operations. If we would check + * in advance if the background was gray or RGB, and position the gray-to-RGB + * transform appropriately, then it would save a lot of work/time. + */ + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED + /* If gray -> RGB, do so now only if background is non-gray; else do later + * for performance reasons + */ + if ((png_ptr->transformations & PNG_GRAY_TO_RGB) && + !(png_ptr->mode & PNG_BACKGROUND_IS_GRAY)) + png_do_gray_to_rgb(row_info, png_ptr->row_buf + 1); +#endif + +#if defined(PNG_READ_BACKGROUND_SUPPORTED) ||\ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) + if (png_ptr->transformations & PNG_COMPOSE) + png_do_compose(row_info, png_ptr->row_buf + 1, png_ptr); +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED + if ((png_ptr->transformations & PNG_GAMMA) && +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED + /* Because RGB_TO_GRAY does the gamma transform. */ + !(png_ptr->transformations & PNG_RGB_TO_GRAY) && +#endif +#if defined(PNG_READ_BACKGROUND_SUPPORTED) ||\ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) + /* Because PNG_COMPOSE does the gamma transform if there is something to + * do (if there is an alpha channel or transparency.) + */ + !((png_ptr->transformations & PNG_COMPOSE) && + ((png_ptr->num_trans != 0) || + (png_ptr->color_type & PNG_COLOR_MASK_ALPHA))) && +#endif + /* Because png_init_read_transformations transforms the palette, unless + * RGB_TO_GRAY will do the transform. + */ + (png_ptr->color_type != PNG_COLOR_TYPE_PALETTE)) + png_do_gamma(row_info, png_ptr->row_buf + 1, png_ptr); +#endif + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED + if ((png_ptr->transformations & PNG_STRIP_ALPHA) && + (png_ptr->transformations & PNG_COMPOSE) && + (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA || + row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA)) + png_do_strip_channel(row_info, png_ptr->row_buf + 1, + 0 /* at_start == false, because SWAP_ALPHA happens later */); +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + if ((png_ptr->transformations & PNG_ENCODE_ALPHA) && + (row_info->color_type & PNG_COLOR_MASK_ALPHA)) + png_do_encode_alpha(row_info, png_ptr->row_buf + 1, png_ptr); +#endif + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + if (png_ptr->transformations & PNG_SCALE_16_TO_8) + png_do_scale_16_to_8(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED + /* There is no harm in doing both of these because only one has any effect, + * by putting the 'scale' option first if the app asks for scale (either by + * calling the API or in a TRANSFORM flag) this is what happens. + */ + if (png_ptr->transformations & PNG_16_TO_8) + png_do_chop(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED + if (png_ptr->transformations & PNG_QUANTIZE) + { + png_do_quantize(row_info, png_ptr->row_buf + 1, + png_ptr->palette_lookup, png_ptr->quantize_index); + + if (row_info->rowbytes == 0) + png_error(png_ptr, "png_do_quantize returned rowbytes=0"); + } +#endif /* PNG_READ_QUANTIZE_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_16_SUPPORTED + /* Do the expansion now, after all the arithmetic has been done. Notice + * that previous transformations can handle the PNG_EXPAND_16 flag if this + * is efficient (particularly true in the case of gamma correction, where + * better accuracy results faster!) + */ + if (png_ptr->transformations & PNG_EXPAND_16) + png_do_expand_16(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED + /* NOTE: moved here in 1.5.4 (from much later in this list.) */ + if ((png_ptr->transformations & PNG_GRAY_TO_RGB) && + (png_ptr->mode & PNG_BACKGROUND_IS_GRAY)) + png_do_gray_to_rgb(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_READ_INVERT_SUPPORTED + if (png_ptr->transformations & PNG_INVERT_MONO) + png_do_invert(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_READ_SHIFT_SUPPORTED + if (png_ptr->transformations & PNG_SHIFT) + png_do_unshift(row_info, png_ptr->row_buf + 1, + &(png_ptr->shift)); +#endif + +#ifdef PNG_READ_PACK_SUPPORTED + if (png_ptr->transformations & PNG_PACK) + png_do_unpack(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED + /* Added at libpng-1.5.10 */ + if (row_info->color_type == PNG_COLOR_TYPE_PALETTE && + png_ptr->num_palette_max >= 0) + png_do_check_palette_indexes(png_ptr, row_info); +#endif + +#ifdef PNG_READ_BGR_SUPPORTED + if (png_ptr->transformations & PNG_BGR) + png_do_bgr(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_READ_PACKSWAP_SUPPORTED + if (png_ptr->transformations & PNG_PACKSWAP) + png_do_packswap(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_READ_FILLER_SUPPORTED + if (png_ptr->transformations & PNG_FILLER) + png_do_read_filler(row_info, png_ptr->row_buf + 1, + (png_uint_32)png_ptr->filler, png_ptr->flags); +#endif + +#ifdef PNG_READ_INVERT_ALPHA_SUPPORTED + if (png_ptr->transformations & PNG_INVERT_ALPHA) + png_do_read_invert_alpha(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_READ_SWAP_ALPHA_SUPPORTED + if (png_ptr->transformations & PNG_SWAP_ALPHA) + png_do_read_swap_alpha(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_READ_16BIT_SUPPORTED +#ifdef PNG_READ_SWAP_SUPPORTED + if (png_ptr->transformations & PNG_SWAP_BYTES) + png_do_swap(row_info, png_ptr->row_buf + 1); +#endif +#endif + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED + if (png_ptr->transformations & PNG_USER_TRANSFORM) + { + if (png_ptr->read_user_transform_fn != NULL) + (*(png_ptr->read_user_transform_fn)) /* User read transform function */ + (png_ptr, /* png_ptr */ + row_info, /* row_info: */ + /* png_uint_32 width; width of row */ + /* png_size_t rowbytes; number of bytes in row */ + /* png_byte color_type; color type of pixels */ + /* png_byte bit_depth; bit depth of samples */ + /* png_byte channels; number of channels (1-4) */ + /* png_byte pixel_depth; bits per pixel (depth*channels) */ + png_ptr->row_buf + 1); /* start of pixel data for row */ +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED + if (png_ptr->user_transform_depth) + row_info->bit_depth = png_ptr->user_transform_depth; + + if (png_ptr->user_transform_channels) + row_info->channels = png_ptr->user_transform_channels; +#endif + row_info->pixel_depth = (png_byte)(row_info->bit_depth * + row_info->channels); + + row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, row_info->width); + } +#endif +} + +#ifdef PNG_READ_PACK_SUPPORTED +/* Unpack pixels of 1, 2, or 4 bits per pixel into 1 byte per pixel, + * without changing the actual values. Thus, if you had a row with + * a bit depth of 1, you would end up with bytes that only contained + * the numbers 0 or 1. If you would rather they contain 0 and 255, use + * png_do_shift() after this. + */ +void /* PRIVATE */ +png_do_unpack(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_unpack"); + + if (row_info->bit_depth < 8) + { + png_uint_32 i; + png_uint_32 row_width=row_info->width; + + switch (row_info->bit_depth) + { + case 1: + { + png_bytep sp = row + (png_size_t)((row_width - 1) >> 3); + png_bytep dp = row + (png_size_t)row_width - 1; + png_uint_32 shift = 7 - (int)((row_width + 7) & 0x07); + for (i = 0; i < row_width; i++) + { + *dp = (png_byte)((*sp >> shift) & 0x01); + + if (shift == 7) + { + shift = 0; + sp--; + } + + else + shift++; + + dp--; + } + break; + } + + case 2: + { + + png_bytep sp = row + (png_size_t)((row_width - 1) >> 2); + png_bytep dp = row + (png_size_t)row_width - 1; + png_uint_32 shift = (int)((3 - ((row_width + 3) & 0x03)) << 1); + for (i = 0; i < row_width; i++) + { + *dp = (png_byte)((*sp >> shift) & 0x03); + + if (shift == 6) + { + shift = 0; + sp--; + } + + else + shift += 2; + + dp--; + } + break; + } + + case 4: + { + png_bytep sp = row + (png_size_t)((row_width - 1) >> 1); + png_bytep dp = row + (png_size_t)row_width - 1; + png_uint_32 shift = (int)((1 - ((row_width + 1) & 0x01)) << 2); + for (i = 0; i < row_width; i++) + { + *dp = (png_byte)((*sp >> shift) & 0x0f); + + if (shift == 4) + { + shift = 0; + sp--; + } + + else + shift = 4; + + dp--; + } + break; + } + + default: + break; + } + row_info->bit_depth = 8; + row_info->pixel_depth = (png_byte)(8 * row_info->channels); + row_info->rowbytes = row_width * row_info->channels; + } +} +#endif + +#ifdef PNG_READ_SHIFT_SUPPORTED +/* Reverse the effects of png_do_shift. This routine merely shifts the + * pixels back to their significant bits values. Thus, if you have + * a row of bit depth 8, but only 5 are significant, this will shift + * the values back to 0 through 31. + */ +void /* PRIVATE */ +png_do_unshift(png_row_infop row_info, png_bytep row, + png_const_color_8p sig_bits) +{ + int color_type; + + png_debug(1, "in png_do_unshift"); + + /* The palette case has already been handled in the _init routine. */ + color_type = row_info->color_type; + + if (color_type != PNG_COLOR_TYPE_PALETTE) + { + int shift[4]; + int channels = 0; + int bit_depth = row_info->bit_depth; + + if (color_type & PNG_COLOR_MASK_COLOR) + { + shift[channels++] = bit_depth - sig_bits->red; + shift[channels++] = bit_depth - sig_bits->green; + shift[channels++] = bit_depth - sig_bits->blue; + } + + else + { + shift[channels++] = bit_depth - sig_bits->gray; + } + + if (color_type & PNG_COLOR_MASK_ALPHA) + { + shift[channels++] = bit_depth - sig_bits->alpha; + } + + { + int c, have_shift; + + for (c = have_shift = 0; c < channels; ++c) + { + /* A shift of more than the bit depth is an error condition but it + * gets ignored here. + */ + if (shift[c] <= 0 || shift[c] >= bit_depth) + shift[c] = 0; + + else + have_shift = 1; + } + + if (!have_shift) + return; + } + + switch (bit_depth) + { + default: + /* Must be 1bpp gray: should not be here! */ + /* NOTREACHED */ + break; + + case 2: + /* Must be 2bpp gray */ + /* assert(channels == 1 && shift[0] == 1) */ + { + png_bytep bp = row; + png_bytep bp_end = bp + row_info->rowbytes; + + while (bp < bp_end) + { + int b = (*bp >> 1) & 0x55; + *bp++ = (png_byte)b; + } + break; + } + + case 4: + /* Must be 4bpp gray */ + /* assert(channels == 1) */ + { + png_bytep bp = row; + png_bytep bp_end = bp + row_info->rowbytes; + int gray_shift = shift[0]; + int mask = 0xf >> gray_shift; + + mask |= mask << 4; + + while (bp < bp_end) + { + int b = (*bp >> gray_shift) & mask; + *bp++ = (png_byte)b; + } + break; + } + + case 8: + /* Single byte components, G, GA, RGB, RGBA */ + { + png_bytep bp = row; + png_bytep bp_end = bp + row_info->rowbytes; + int channel = 0; + + while (bp < bp_end) + { + int b = *bp >> shift[channel]; + if (++channel >= channels) + channel = 0; + *bp++ = (png_byte)b; + } + break; + } + +#ifdef PNG_READ_16BIT_SUPPORTED + case 16: + /* Double byte components, G, GA, RGB, RGBA */ + { + png_bytep bp = row; + png_bytep bp_end = bp + row_info->rowbytes; + int channel = 0; + + while (bp < bp_end) + { + int value = (bp[0] << 8) + bp[1]; + + value >>= shift[channel]; + if (++channel >= channels) + channel = 0; + *bp++ = (png_byte)(value >> 8); + *bp++ = (png_byte)(value & 0xff); + } + break; + } +#endif + } + } +} +#endif + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED +/* Scale rows of bit depth 16 down to 8 accurately */ +void /* PRIVATE */ +png_do_scale_16_to_8(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_scale_16_to_8"); + + if (row_info->bit_depth == 16) + { + png_bytep sp = row; /* source */ + png_bytep dp = row; /* destination */ + png_bytep ep = sp + row_info->rowbytes; /* end+1 */ + + while (sp < ep) + { + /* The input is an array of 16 bit components, these must be scaled to + * 8 bits each. For a 16 bit value V the required value (from the PNG + * specification) is: + * + * (V * 255) / 65535 + * + * This reduces to round(V / 257), or floor((V + 128.5)/257) + * + * Represent V as the two byte value vhi.vlo. Make a guess that the + * result is the top byte of V, vhi, then the correction to this value + * is: + * + * error = floor(((V-vhi.vhi) + 128.5) / 257) + * = floor(((vlo-vhi) + 128.5) / 257) + * + * This can be approximated using integer arithmetic (and a signed + * shift): + * + * error = (vlo-vhi+128) >> 8; + * + * The approximate differs from the exact answer only when (vlo-vhi) is + * 128; it then gives a correction of +1 when the exact correction is + * 0. This gives 128 errors. The exact answer (correct for all 16 bit + * input values) is: + * + * error = (vlo-vhi+128)*65535 >> 24; + * + * An alternative arithmetic calculation which also gives no errors is: + * + * (V * 255 + 32895) >> 16 + */ + + png_int_32 tmp = *sp++; /* must be signed! */ + tmp += (((int)*sp++ - tmp + 128) * 65535) >> 24; + *dp++ = (png_byte)tmp; + } + + row_info->bit_depth = 8; + row_info->pixel_depth = (png_byte)(8 * row_info->channels); + row_info->rowbytes = row_info->width * row_info->channels; + } +} +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED +void /* PRIVATE */ +/* Simply discard the low byte. This was the default behavior prior + * to libpng-1.5.4. + */ +png_do_chop(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_chop"); + + if (row_info->bit_depth == 16) + { + png_bytep sp = row; /* source */ + png_bytep dp = row; /* destination */ + png_bytep ep = sp + row_info->rowbytes; /* end+1 */ + + while (sp < ep) + { + *dp++ = *sp; + sp += 2; /* skip low byte */ + } + + row_info->bit_depth = 8; + row_info->pixel_depth = (png_byte)(8 * row_info->channels); + row_info->rowbytes = row_info->width * row_info->channels; + } +} +#endif + +#ifdef PNG_READ_SWAP_ALPHA_SUPPORTED +void /* PRIVATE */ +png_do_read_swap_alpha(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_read_swap_alpha"); + + { + png_uint_32 row_width = row_info->width; + if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + { + /* This converts from RGBA to ARGB */ + if (row_info->bit_depth == 8) + { + png_bytep sp = row + row_info->rowbytes; + png_bytep dp = sp; + png_byte save; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + save = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = save; + } + } + +#ifdef PNG_READ_16BIT_SUPPORTED + /* This converts from RRGGBBAA to AARRGGBB */ + else + { + png_bytep sp = row + row_info->rowbytes; + png_bytep dp = sp; + png_byte save[2]; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + save[0] = *(--sp); + save[1] = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = save[0]; + *(--dp) = save[1]; + } + } +#endif + } + + else if (row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + { + /* This converts from GA to AG */ + if (row_info->bit_depth == 8) + { + png_bytep sp = row + row_info->rowbytes; + png_bytep dp = sp; + png_byte save; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + save = *(--sp); + *(--dp) = *(--sp); + *(--dp) = save; + } + } + +#ifdef PNG_READ_16BIT_SUPPORTED + /* This converts from GGAA to AAGG */ + else + { + png_bytep sp = row + row_info->rowbytes; + png_bytep dp = sp; + png_byte save[2]; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + save[0] = *(--sp); + save[1] = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = save[0]; + *(--dp) = save[1]; + } + } +#endif + } + } +} +#endif + +#ifdef PNG_READ_INVERT_ALPHA_SUPPORTED +void /* PRIVATE */ +png_do_read_invert_alpha(png_row_infop row_info, png_bytep row) +{ + png_uint_32 row_width; + png_debug(1, "in png_do_read_invert_alpha"); + + row_width = row_info->width; + if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + { + if (row_info->bit_depth == 8) + { + /* This inverts the alpha channel in RGBA */ + png_bytep sp = row + row_info->rowbytes; + png_bytep dp = sp; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + *(--dp) = (png_byte)(255 - *(--sp)); + +/* This does nothing: + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + We can replace it with: +*/ + sp-=3; + dp=sp; + } + } + +#ifdef PNG_READ_16BIT_SUPPORTED + /* This inverts the alpha channel in RRGGBBAA */ + else + { + png_bytep sp = row + row_info->rowbytes; + png_bytep dp = sp; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + *(--dp) = (png_byte)(255 - *(--sp)); + *(--dp) = (png_byte)(255 - *(--sp)); + +/* This does nothing: + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + We can replace it with: +*/ + sp-=6; + dp=sp; + } + } +#endif + } + else if (row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + { + if (row_info->bit_depth == 8) + { + /* This inverts the alpha channel in GA */ + png_bytep sp = row + row_info->rowbytes; + png_bytep dp = sp; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + *(--dp) = (png_byte)(255 - *(--sp)); + *(--dp) = *(--sp); + } + } + +#ifdef PNG_READ_16BIT_SUPPORTED + else + { + /* This inverts the alpha channel in GGAA */ + png_bytep sp = row + row_info->rowbytes; + png_bytep dp = sp; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + *(--dp) = (png_byte)(255 - *(--sp)); + *(--dp) = (png_byte)(255 - *(--sp)); +/* + *(--dp) = *(--sp); + *(--dp) = *(--sp); +*/ + sp-=2; + dp=sp; + } + } +#endif + } +} +#endif + +#ifdef PNG_READ_FILLER_SUPPORTED +/* Add filler channel if we have RGB color */ +void /* PRIVATE */ +png_do_read_filler(png_row_infop row_info, png_bytep row, + png_uint_32 filler, png_uint_32 flags) +{ + png_uint_32 i; + png_uint_32 row_width = row_info->width; + +#ifdef PNG_READ_16BIT_SUPPORTED + png_byte hi_filler = (png_byte)((filler>>8) & 0xff); +#endif + png_byte lo_filler = (png_byte)(filler & 0xff); + + png_debug(1, "in png_do_read_filler"); + + if ( + row_info->color_type == PNG_COLOR_TYPE_GRAY) + { + if (row_info->bit_depth == 8) + { + if (flags & PNG_FLAG_FILLER_AFTER) + { + /* This changes the data from G to GX */ + png_bytep sp = row + (png_size_t)row_width; + png_bytep dp = sp + (png_size_t)row_width; + for (i = 1; i < row_width; i++) + { + *(--dp) = lo_filler; + *(--dp) = *(--sp); + } + *(--dp) = lo_filler; + row_info->channels = 2; + row_info->pixel_depth = 16; + row_info->rowbytes = row_width * 2; + } + + else + { + /* This changes the data from G to XG */ + png_bytep sp = row + (png_size_t)row_width; + png_bytep dp = sp + (png_size_t)row_width; + for (i = 0; i < row_width; i++) + { + *(--dp) = *(--sp); + *(--dp) = lo_filler; + } + row_info->channels = 2; + row_info->pixel_depth = 16; + row_info->rowbytes = row_width * 2; + } + } + +#ifdef PNG_READ_16BIT_SUPPORTED + else if (row_info->bit_depth == 16) + { + if (flags & PNG_FLAG_FILLER_AFTER) + { + /* This changes the data from GG to GGXX */ + png_bytep sp = row + (png_size_t)row_width * 2; + png_bytep dp = sp + (png_size_t)row_width * 2; + for (i = 1; i < row_width; i++) + { + *(--dp) = hi_filler; + *(--dp) = lo_filler; + *(--dp) = *(--sp); + *(--dp) = *(--sp); + } + *(--dp) = hi_filler; + *(--dp) = lo_filler; + row_info->channels = 2; + row_info->pixel_depth = 32; + row_info->rowbytes = row_width * 4; + } + + else + { + /* This changes the data from GG to XXGG */ + png_bytep sp = row + (png_size_t)row_width * 2; + png_bytep dp = sp + (png_size_t)row_width * 2; + for (i = 0; i < row_width; i++) + { + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = hi_filler; + *(--dp) = lo_filler; + } + row_info->channels = 2; + row_info->pixel_depth = 32; + row_info->rowbytes = row_width * 4; + } + } +#endif + } /* COLOR_TYPE == GRAY */ + else if (row_info->color_type == PNG_COLOR_TYPE_RGB) + { + if (row_info->bit_depth == 8) + { + if (flags & PNG_FLAG_FILLER_AFTER) + { + /* This changes the data from RGB to RGBX */ + png_bytep sp = row + (png_size_t)row_width * 3; + png_bytep dp = sp + (png_size_t)row_width; + for (i = 1; i < row_width; i++) + { + *(--dp) = lo_filler; + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + } + *(--dp) = lo_filler; + row_info->channels = 4; + row_info->pixel_depth = 32; + row_info->rowbytes = row_width * 4; + } + + else + { + /* This changes the data from RGB to XRGB */ + png_bytep sp = row + (png_size_t)row_width * 3; + png_bytep dp = sp + (png_size_t)row_width; + for (i = 0; i < row_width; i++) + { + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = lo_filler; + } + row_info->channels = 4; + row_info->pixel_depth = 32; + row_info->rowbytes = row_width * 4; + } + } + +#ifdef PNG_READ_16BIT_SUPPORTED + else if (row_info->bit_depth == 16) + { + if (flags & PNG_FLAG_FILLER_AFTER) + { + /* This changes the data from RRGGBB to RRGGBBXX */ + png_bytep sp = row + (png_size_t)row_width * 6; + png_bytep dp = sp + (png_size_t)row_width * 2; + for (i = 1; i < row_width; i++) + { + *(--dp) = hi_filler; + *(--dp) = lo_filler; + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + } + *(--dp) = hi_filler; + *(--dp) = lo_filler; + row_info->channels = 4; + row_info->pixel_depth = 64; + row_info->rowbytes = row_width * 8; + } + + else + { + /* This changes the data from RRGGBB to XXRRGGBB */ + png_bytep sp = row + (png_size_t)row_width * 6; + png_bytep dp = sp + (png_size_t)row_width * 2; + for (i = 0; i < row_width; i++) + { + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = *(--sp); + *(--dp) = hi_filler; + *(--dp) = lo_filler; + } + + row_info->channels = 4; + row_info->pixel_depth = 64; + row_info->rowbytes = row_width * 8; + } + } +#endif + } /* COLOR_TYPE == RGB */ +} +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +/* Expand grayscale files to RGB, with or without alpha */ +void /* PRIVATE */ +png_do_gray_to_rgb(png_row_infop row_info, png_bytep row) +{ + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + png_debug(1, "in png_do_gray_to_rgb"); + + if (row_info->bit_depth >= 8 && + !(row_info->color_type & PNG_COLOR_MASK_COLOR)) + { + if (row_info->color_type == PNG_COLOR_TYPE_GRAY) + { + if (row_info->bit_depth == 8) + { + /* This changes G to RGB */ + png_bytep sp = row + (png_size_t)row_width - 1; + png_bytep dp = sp + (png_size_t)row_width * 2; + for (i = 0; i < row_width; i++) + { + *(dp--) = *sp; + *(dp--) = *sp; + *(dp--) = *(sp--); + } + } + + else + { + /* This changes GG to RRGGBB */ + png_bytep sp = row + (png_size_t)row_width * 2 - 1; + png_bytep dp = sp + (png_size_t)row_width * 4; + for (i = 0; i < row_width; i++) + { + *(dp--) = *sp; + *(dp--) = *(sp - 1); + *(dp--) = *sp; + *(dp--) = *(sp - 1); + *(dp--) = *(sp--); + *(dp--) = *(sp--); + } + } + } + + else if (row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + { + if (row_info->bit_depth == 8) + { + /* This changes GA to RGBA */ + png_bytep sp = row + (png_size_t)row_width * 2 - 1; + png_bytep dp = sp + (png_size_t)row_width * 2; + for (i = 0; i < row_width; i++) + { + *(dp--) = *(sp--); + *(dp--) = *sp; + *(dp--) = *sp; + *(dp--) = *(sp--); + } + } + + else + { + /* This changes GGAA to RRGGBBAA */ + png_bytep sp = row + (png_size_t)row_width * 4 - 1; + png_bytep dp = sp + (png_size_t)row_width * 4; + for (i = 0; i < row_width; i++) + { + *(dp--) = *(sp--); + *(dp--) = *(sp--); + *(dp--) = *sp; + *(dp--) = *(sp - 1); + *(dp--) = *sp; + *(dp--) = *(sp - 1); + *(dp--) = *(sp--); + *(dp--) = *(sp--); + } + } + } + row_info->channels = (png_byte)(row_info->channels + 2); + row_info->color_type |= PNG_COLOR_MASK_COLOR; + row_info->pixel_depth = (png_byte)(row_info->channels * + row_info->bit_depth); + row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, row_width); + } +} +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +/* Reduce RGB files to grayscale, with or without alpha + * using the equation given in Poynton's ColorFAQ of 1998-01-04 at + * (THIS LINK IS DEAD June 2008 but + * versions dated 1998 through November 2002 have been archived at + * http://web.archive.org/web/20000816232553/http://www.inforamp.net/ + * ~poynton/notes/colour_and_gamma/ColorFAQ.txt ) + * Charles Poynton poynton at poynton.com + * + * Y = 0.212671 * R + 0.715160 * G + 0.072169 * B + * + * which can be expressed with integers as + * + * Y = (6969 * R + 23434 * G + 2365 * B)/32768 + * + * Poynton's current link (as of January 2003 through July 2011): + * + * has changed the numbers slightly: + * + * Y = 0.2126*R + 0.7152*G + 0.0722*B + * + * which can be expressed with integers as + * + * Y = (6966 * R + 23436 * G + 2366 * B)/32768 + * + * Historically, however, libpng uses numbers derived from the ITU-R Rec 709 + * end point chromaticities and the D65 white point. Depending on the + * precision used for the D65 white point this produces a variety of different + * numbers, however if the four decimal place value used in ITU-R Rec 709 is + * used (0.3127,0.3290) the Y calculation would be: + * + * Y = (6968 * R + 23435 * G + 2366 * B)/32768 + * + * While this is correct the rounding results in an overflow for white, because + * the sum of the rounded coefficients is 32769, not 32768. Consequently + * libpng uses, instead, the closest non-overflowing approximation: + * + * Y = (6968 * R + 23434 * G + 2366 * B)/32768 + * + * Starting with libpng-1.5.5, if the image being converted has a cHRM chunk + * (including an sRGB chunk) then the chromaticities are used to calculate the + * coefficients. See the chunk handling in pngrutil.c for more information. + * + * In all cases the calculation is to be done in a linear colorspace. If no + * gamma information is available to correct the encoding of the original RGB + * values this results in an implicit assumption that the original PNG RGB + * values were linear. + * + * Other integer coefficents can be used via png_set_rgb_to_gray(). Because + * the API takes just red and green coefficients the blue coefficient is + * calculated to make the sum 32768. This will result in different rounding + * to that used above. + */ +int /* PRIVATE */ +png_do_rgb_to_gray(png_structrp png_ptr, png_row_infop row_info, png_bytep row) + +{ + int rgb_error = 0; + + png_debug(1, "in png_do_rgb_to_gray"); + + if (!(row_info->color_type & PNG_COLOR_MASK_PALETTE) && + (row_info->color_type & PNG_COLOR_MASK_COLOR)) + { + PNG_CONST png_uint_32 rc = png_ptr->rgb_to_gray_red_coeff; + PNG_CONST png_uint_32 gc = png_ptr->rgb_to_gray_green_coeff; + PNG_CONST png_uint_32 bc = 32768 - rc - gc; + PNG_CONST png_uint_32 row_width = row_info->width; + PNG_CONST int have_alpha = + (row_info->color_type & PNG_COLOR_MASK_ALPHA) != 0; + + if (row_info->bit_depth == 8) + { +#ifdef PNG_READ_GAMMA_SUPPORTED + /* Notice that gamma to/from 1 are not necessarily inverses (if + * there is an overall gamma correction). Prior to 1.5.5 this code + * checked the linearized values for equality; this doesn't match + * the documentation, the original values must be checked. + */ + if (png_ptr->gamma_from_1 != NULL && png_ptr->gamma_to_1 != NULL) + { + png_bytep sp = row; + png_bytep dp = row; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + png_byte red = *(sp++); + png_byte green = *(sp++); + png_byte blue = *(sp++); + + if (red != green || red != blue) + { + red = png_ptr->gamma_to_1[red]; + green = png_ptr->gamma_to_1[green]; + blue = png_ptr->gamma_to_1[blue]; + + rgb_error |= 1; + *(dp++) = png_ptr->gamma_from_1[ + (rc*red + gc*green + bc*blue + 16384)>>15]; + } + + else + { + /* If there is no overall correction the table will not be + * set. + */ + if (png_ptr->gamma_table != NULL) + red = png_ptr->gamma_table[red]; + + *(dp++) = red; + } + + if (have_alpha) + *(dp++) = *(sp++); + } + } + else +#endif + { + png_bytep sp = row; + png_bytep dp = row; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + png_byte red = *(sp++); + png_byte green = *(sp++); + png_byte blue = *(sp++); + + if (red != green || red != blue) + { + rgb_error |= 1; + /* NOTE: this is the historical approach which simply + * truncates the results. + */ + *(dp++) = (png_byte)((rc*red + gc*green + bc*blue)>>15); + } + + else + *(dp++) = red; + + if (have_alpha) + *(dp++) = *(sp++); + } + } + } + + else /* RGB bit_depth == 16 */ + { +#ifdef PNG_READ_GAMMA_SUPPORTED + if (png_ptr->gamma_16_to_1 != NULL && png_ptr->gamma_16_from_1 != NULL) + { + png_bytep sp = row; + png_bytep dp = row; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + png_uint_16 red, green, blue, w; + + red = (png_uint_16)(((*(sp))<<8) | *(sp + 1)); sp += 2; + green = (png_uint_16)(((*(sp))<<8) | *(sp + 1)); sp += 2; + blue = (png_uint_16)(((*(sp))<<8) | *(sp + 1)); sp += 2; + + if (red == green && red == blue) + { + if (png_ptr->gamma_16_table != NULL) + w = png_ptr->gamma_16_table[(red&0xff) + >> png_ptr->gamma_shift][red>>8]; + + else + w = red; + } + + else + { + png_uint_16 red_1 = png_ptr->gamma_16_to_1[(red&0xff) + >> png_ptr->gamma_shift][red>>8]; + png_uint_16 green_1 = + png_ptr->gamma_16_to_1[(green&0xff) >> + png_ptr->gamma_shift][green>>8]; + png_uint_16 blue_1 = png_ptr->gamma_16_to_1[(blue&0xff) + >> png_ptr->gamma_shift][blue>>8]; + png_uint_16 gray16 = (png_uint_16)((rc*red_1 + gc*green_1 + + bc*blue_1 + 16384)>>15); + w = png_ptr->gamma_16_from_1[(gray16&0xff) >> + png_ptr->gamma_shift][gray16 >> 8]; + rgb_error |= 1; + } + + *(dp++) = (png_byte)((w>>8) & 0xff); + *(dp++) = (png_byte)(w & 0xff); + + if (have_alpha) + { + *(dp++) = *(sp++); + *(dp++) = *(sp++); + } + } + } + else +#endif + { + png_bytep sp = row; + png_bytep dp = row; + png_uint_32 i; + + for (i = 0; i < row_width; i++) + { + png_uint_16 red, green, blue, gray16; + + red = (png_uint_16)(((*(sp))<<8) | *(sp + 1)); sp += 2; + green = (png_uint_16)(((*(sp))<<8) | *(sp + 1)); sp += 2; + blue = (png_uint_16)(((*(sp))<<8) | *(sp + 1)); sp += 2; + + if (red != green || red != blue) + rgb_error |= 1; + + /* From 1.5.5 in the 16 bit case do the accurate conversion even + * in the 'fast' case - this is because this is where the code + * ends up when handling linear 16 bit data. + */ + gray16 = (png_uint_16)((rc*red + gc*green + bc*blue + 16384) >> + 15); + *(dp++) = (png_byte)((gray16>>8) & 0xff); + *(dp++) = (png_byte)(gray16 & 0xff); + + if (have_alpha) + { + *(dp++) = *(sp++); + *(dp++) = *(sp++); + } + } + } + } + + row_info->channels = (png_byte)(row_info->channels - 2); + row_info->color_type = (png_byte)(row_info->color_type & + ~PNG_COLOR_MASK_COLOR); + row_info->pixel_depth = (png_byte)(row_info->channels * + row_info->bit_depth); + row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, row_width); + } + return rgb_error; +} +#endif +#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ + +#ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +/* Build a grayscale palette. Palette is assumed to be 1 << bit_depth + * large of png_color. This lets grayscale images be treated as + * paletted. Most useful for gamma correction and simplification + * of code. This API is not used internally. + */ +void PNGAPI +png_build_grayscale_palette(int bit_depth, png_colorp palette) +{ + int num_palette; + int color_inc; + int i; + int v; + + png_debug(1, "in png_do_build_grayscale_palette"); + + if (palette == NULL) + return; + + switch (bit_depth) + { + case 1: + num_palette = 2; + color_inc = 0xff; + break; + + case 2: + num_palette = 4; + color_inc = 0x55; + break; + + case 4: + num_palette = 16; + color_inc = 0x11; + break; + + case 8: + num_palette = 256; + color_inc = 1; + break; + + default: + num_palette = 0; + color_inc = 0; + break; + } + + for (i = 0, v = 0; i < num_palette; i++, v += color_inc) + { + palette[i].red = (png_byte)v; + palette[i].green = (png_byte)v; + palette[i].blue = (png_byte)v; + } +} +#endif + + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +#if defined(PNG_READ_BACKGROUND_SUPPORTED) ||\ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) +/* Replace any alpha or transparency with the supplied background color. + * "background" is already in the screen gamma, while "background_1" is + * at a gamma of 1.0. Paletted files have already been taken care of. + */ +void /* PRIVATE */ +png_do_compose(png_row_infop row_info, png_bytep row, png_structrp png_ptr) +{ +#ifdef PNG_READ_GAMMA_SUPPORTED + png_const_bytep gamma_table = png_ptr->gamma_table; + png_const_bytep gamma_from_1 = png_ptr->gamma_from_1; + png_const_bytep gamma_to_1 = png_ptr->gamma_to_1; + png_const_uint_16pp gamma_16 = png_ptr->gamma_16_table; + png_const_uint_16pp gamma_16_from_1 = png_ptr->gamma_16_from_1; + png_const_uint_16pp gamma_16_to_1 = png_ptr->gamma_16_to_1; + int gamma_shift = png_ptr->gamma_shift; + int optimize = (png_ptr->flags & PNG_FLAG_OPTIMIZE_ALPHA) != 0; +#endif + + png_bytep sp; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + int shift; + + png_debug(1, "in png_do_compose"); + + { + switch (row_info->color_type) + { + case PNG_COLOR_TYPE_GRAY: + { + switch (row_info->bit_depth) + { + case 1: + { + sp = row; + shift = 7; + for (i = 0; i < row_width; i++) + { + if ((png_uint_16)((*sp >> shift) & 0x01) + == png_ptr->trans_color.gray) + { + unsigned int tmp = *sp & (0x7f7f >> (7 - shift)); + tmp |= png_ptr->background.gray << shift; + *sp = (png_byte)(tmp & 0xff); + } + + if (!shift) + { + shift = 7; + sp++; + } + + else + shift--; + } + break; + } + + case 2: + { +#ifdef PNG_READ_GAMMA_SUPPORTED + if (gamma_table != NULL) + { + sp = row; + shift = 6; + for (i = 0; i < row_width; i++) + { + if ((png_uint_16)((*sp >> shift) & 0x03) + == png_ptr->trans_color.gray) + { + unsigned int tmp = *sp & (0x3f3f >> (6 - shift)); + tmp |= png_ptr->background.gray << shift; + *sp = (png_byte)(tmp & 0xff); + } + + else + { + unsigned int p = (*sp >> shift) & 0x03; + unsigned int g = (gamma_table [p | (p << 2) | + (p << 4) | (p << 6)] >> 6) & 0x03; + unsigned int tmp = *sp & (0x3f3f >> (6 - shift)); + tmp |= g << shift; + *sp = (png_byte)(tmp & 0xff); + } + + if (!shift) + { + shift = 6; + sp++; + } + + else + shift -= 2; + } + } + + else +#endif + { + sp = row; + shift = 6; + for (i = 0; i < row_width; i++) + { + if ((png_uint_16)((*sp >> shift) & 0x03) + == png_ptr->trans_color.gray) + { + unsigned int tmp = *sp & (0x3f3f >> (6 - shift)); + tmp |= png_ptr->background.gray << shift; + *sp = (png_byte)(tmp & 0xff); + } + + if (!shift) + { + shift = 6; + sp++; + } + + else + shift -= 2; + } + } + break; + } + + case 4: + { +#ifdef PNG_READ_GAMMA_SUPPORTED + if (gamma_table != NULL) + { + sp = row; + shift = 4; + for (i = 0; i < row_width; i++) + { + if ((png_uint_16)((*sp >> shift) & 0x0f) + == png_ptr->trans_color.gray) + { + unsigned int tmp = *sp & (0xf0f >> (4 - shift)); + tmp |= png_ptr->background.gray << shift; + *sp = (png_byte)(tmp & 0xff); + } + + else + { + unsigned int p = (*sp >> shift) & 0x0f; + unsigned int g = (gamma_table[p | (p << 4)] >> 4) & + 0x0f; + unsigned int tmp = *sp & (0xf0f >> (4 - shift)); + tmp |= g << shift; + *sp = (png_byte)(tmp & 0xff); + } + + if (!shift) + { + shift = 4; + sp++; + } + + else + shift -= 4; + } + } + + else +#endif + { + sp = row; + shift = 4; + for (i = 0; i < row_width; i++) + { + if ((png_uint_16)((*sp >> shift) & 0x0f) + == png_ptr->trans_color.gray) + { + unsigned int tmp = *sp & (0xf0f >> (4 - shift)); + tmp |= png_ptr->background.gray << shift; + *sp = (png_byte)(tmp & 0xff); + } + + if (!shift) + { + shift = 4; + sp++; + } + + else + shift -= 4; + } + } + break; + } + + case 8: + { +#ifdef PNG_READ_GAMMA_SUPPORTED + if (gamma_table != NULL) + { + sp = row; + for (i = 0; i < row_width; i++, sp++) + { + if (*sp == png_ptr->trans_color.gray) + *sp = (png_byte)png_ptr->background.gray; + + else + *sp = gamma_table[*sp]; + } + } + else +#endif + { + sp = row; + for (i = 0; i < row_width; i++, sp++) + { + if (*sp == png_ptr->trans_color.gray) + *sp = (png_byte)png_ptr->background.gray; + } + } + break; + } + + case 16: + { +#ifdef PNG_READ_GAMMA_SUPPORTED + if (gamma_16 != NULL) + { + sp = row; + for (i = 0; i < row_width; i++, sp += 2) + { + png_uint_16 v; + + v = (png_uint_16)(((*sp) << 8) + *(sp + 1)); + + if (v == png_ptr->trans_color.gray) + { + /* Background is already in screen gamma */ + *sp = (png_byte)((png_ptr->background.gray >> 8) + & 0xff); + *(sp + 1) = (png_byte)(png_ptr->background.gray + & 0xff); + } + + else + { + v = gamma_16[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + } + } + } + else +#endif + { + sp = row; + for (i = 0; i < row_width; i++, sp += 2) + { + png_uint_16 v; + + v = (png_uint_16)(((*sp) << 8) + *(sp + 1)); + + if (v == png_ptr->trans_color.gray) + { + *sp = (png_byte)((png_ptr->background.gray >> 8) + & 0xff); + *(sp + 1) = (png_byte)(png_ptr->background.gray + & 0xff); + } + } + } + break; + } + + default: + break; + } + break; + } + + case PNG_COLOR_TYPE_RGB: + { + if (row_info->bit_depth == 8) + { +#ifdef PNG_READ_GAMMA_SUPPORTED + if (gamma_table != NULL) + { + sp = row; + for (i = 0; i < row_width; i++, sp += 3) + { + if (*sp == png_ptr->trans_color.red && + *(sp + 1) == png_ptr->trans_color.green && + *(sp + 2) == png_ptr->trans_color.blue) + { + *sp = (png_byte)png_ptr->background.red; + *(sp + 1) = (png_byte)png_ptr->background.green; + *(sp + 2) = (png_byte)png_ptr->background.blue; + } + + else + { + *sp = gamma_table[*sp]; + *(sp + 1) = gamma_table[*(sp + 1)]; + *(sp + 2) = gamma_table[*(sp + 2)]; + } + } + } + else +#endif + { + sp = row; + for (i = 0; i < row_width; i++, sp += 3) + { + if (*sp == png_ptr->trans_color.red && + *(sp + 1) == png_ptr->trans_color.green && + *(sp + 2) == png_ptr->trans_color.blue) + { + *sp = (png_byte)png_ptr->background.red; + *(sp + 1) = (png_byte)png_ptr->background.green; + *(sp + 2) = (png_byte)png_ptr->background.blue; + } + } + } + } + else /* if (row_info->bit_depth == 16) */ + { +#ifdef PNG_READ_GAMMA_SUPPORTED + if (gamma_16 != NULL) + { + sp = row; + for (i = 0; i < row_width; i++, sp += 6) + { + png_uint_16 r = (png_uint_16)(((*sp) << 8) + *(sp + 1)); + + png_uint_16 g = (png_uint_16)(((*(sp + 2)) << 8) + + *(sp + 3)); + + png_uint_16 b = (png_uint_16)(((*(sp + 4)) << 8) + + *(sp + 5)); + + if (r == png_ptr->trans_color.red && + g == png_ptr->trans_color.green && + b == png_ptr->trans_color.blue) + { + /* Background is already in screen gamma */ + *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff); + *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff); + *(sp + 2) = (png_byte)((png_ptr->background.green >> 8) + & 0xff); + *(sp + 3) = (png_byte)(png_ptr->background.green + & 0xff); + *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8) + & 0xff); + *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff); + } + + else + { + png_uint_16 v = gamma_16[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + + v = gamma_16[*(sp + 3) >> gamma_shift][*(sp + 2)]; + *(sp + 2) = (png_byte)((v >> 8) & 0xff); + *(sp + 3) = (png_byte)(v & 0xff); + + v = gamma_16[*(sp + 5) >> gamma_shift][*(sp + 4)]; + *(sp + 4) = (png_byte)((v >> 8) & 0xff); + *(sp + 5) = (png_byte)(v & 0xff); + } + } + } + + else +#endif + { + sp = row; + for (i = 0; i < row_width; i++, sp += 6) + { + png_uint_16 r = (png_uint_16)(((*sp) << 8) + *(sp + 1)); + + png_uint_16 g = (png_uint_16)(((*(sp + 2)) << 8) + + *(sp + 3)); + + png_uint_16 b = (png_uint_16)(((*(sp + 4)) << 8) + + *(sp + 5)); + + if (r == png_ptr->trans_color.red && + g == png_ptr->trans_color.green && + b == png_ptr->trans_color.blue) + { + *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff); + *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff); + *(sp + 2) = (png_byte)((png_ptr->background.green >> 8) + & 0xff); + *(sp + 3) = (png_byte)(png_ptr->background.green + & 0xff); + *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8) + & 0xff); + *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff); + } + } + } + } + break; + } + + case PNG_COLOR_TYPE_GRAY_ALPHA: + { + if (row_info->bit_depth == 8) + { +#ifdef PNG_READ_GAMMA_SUPPORTED + if (gamma_to_1 != NULL && gamma_from_1 != NULL && + gamma_table != NULL) + { + sp = row; + for (i = 0; i < row_width; i++, sp += 2) + { + png_uint_16 a = *(sp + 1); + + if (a == 0xff) + *sp = gamma_table[*sp]; + + else if (a == 0) + { + /* Background is already in screen gamma */ + *sp = (png_byte)png_ptr->background.gray; + } + + else + { + png_byte v, w; + + v = gamma_to_1[*sp]; + png_composite(w, v, a, png_ptr->background_1.gray); + if (!optimize) + w = gamma_from_1[w]; + *sp = w; + } + } + } + else +#endif + { + sp = row; + for (i = 0; i < row_width; i++, sp += 2) + { + png_byte a = *(sp + 1); + + if (a == 0) + *sp = (png_byte)png_ptr->background.gray; + + else if (a < 0xff) + png_composite(*sp, *sp, a, png_ptr->background.gray); + } + } + } + else /* if (png_ptr->bit_depth == 16) */ + { +#ifdef PNG_READ_GAMMA_SUPPORTED + if (gamma_16 != NULL && gamma_16_from_1 != NULL && + gamma_16_to_1 != NULL) + { + sp = row; + for (i = 0; i < row_width; i++, sp += 4) + { + png_uint_16 a = (png_uint_16)(((*(sp + 2)) << 8) + + *(sp + 3)); + + if (a == (png_uint_16)0xffff) + { + png_uint_16 v; + + v = gamma_16[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + } + + else if (a == 0) + { + /* Background is already in screen gamma */ + *sp = (png_byte)((png_ptr->background.gray >> 8) + & 0xff); + *(sp + 1) = (png_byte)(png_ptr->background.gray & 0xff); + } + + else + { + png_uint_16 g, v, w; + + g = gamma_16_to_1[*(sp + 1) >> gamma_shift][*sp]; + png_composite_16(v, g, a, png_ptr->background_1.gray); + if (optimize) + w = v; + else + w = gamma_16_from_1[(v&0xff) >> gamma_shift][v >> 8]; + *sp = (png_byte)((w >> 8) & 0xff); + *(sp + 1) = (png_byte)(w & 0xff); + } + } + } + else +#endif + { + sp = row; + for (i = 0; i < row_width; i++, sp += 4) + { + png_uint_16 a = (png_uint_16)(((*(sp + 2)) << 8) + + *(sp + 3)); + + if (a == 0) + { + *sp = (png_byte)((png_ptr->background.gray >> 8) + & 0xff); + *(sp + 1) = (png_byte)(png_ptr->background.gray & 0xff); + } + + else if (a < 0xffff) + { + png_uint_16 g, v; + + g = (png_uint_16)(((*sp) << 8) + *(sp + 1)); + png_composite_16(v, g, a, png_ptr->background.gray); + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + } + } + } + } + break; + } + + case PNG_COLOR_TYPE_RGB_ALPHA: + { + if (row_info->bit_depth == 8) + { +#ifdef PNG_READ_GAMMA_SUPPORTED + if (gamma_to_1 != NULL && gamma_from_1 != NULL && + gamma_table != NULL) + { + sp = row; + for (i = 0; i < row_width; i++, sp += 4) + { + png_byte a = *(sp + 3); + + if (a == 0xff) + { + *sp = gamma_table[*sp]; + *(sp + 1) = gamma_table[*(sp + 1)]; + *(sp + 2) = gamma_table[*(sp + 2)]; + } + + else if (a == 0) + { + /* Background is already in screen gamma */ + *sp = (png_byte)png_ptr->background.red; + *(sp + 1) = (png_byte)png_ptr->background.green; + *(sp + 2) = (png_byte)png_ptr->background.blue; + } + + else + { + png_byte v, w; + + v = gamma_to_1[*sp]; + png_composite(w, v, a, png_ptr->background_1.red); + if (!optimize) w = gamma_from_1[w]; + *sp = w; + + v = gamma_to_1[*(sp + 1)]; + png_composite(w, v, a, png_ptr->background_1.green); + if (!optimize) w = gamma_from_1[w]; + *(sp + 1) = w; + + v = gamma_to_1[*(sp + 2)]; + png_composite(w, v, a, png_ptr->background_1.blue); + if (!optimize) w = gamma_from_1[w]; + *(sp + 2) = w; + } + } + } + else +#endif + { + sp = row; + for (i = 0; i < row_width; i++, sp += 4) + { + png_byte a = *(sp + 3); + + if (a == 0) + { + *sp = (png_byte)png_ptr->background.red; + *(sp + 1) = (png_byte)png_ptr->background.green; + *(sp + 2) = (png_byte)png_ptr->background.blue; + } + + else if (a < 0xff) + { + png_composite(*sp, *sp, a, png_ptr->background.red); + + png_composite(*(sp + 1), *(sp + 1), a, + png_ptr->background.green); + + png_composite(*(sp + 2), *(sp + 2), a, + png_ptr->background.blue); + } + } + } + } + else /* if (row_info->bit_depth == 16) */ + { +#ifdef PNG_READ_GAMMA_SUPPORTED + if (gamma_16 != NULL && gamma_16_from_1 != NULL && + gamma_16_to_1 != NULL) + { + sp = row; + for (i = 0; i < row_width; i++, sp += 8) + { + png_uint_16 a = (png_uint_16)(((png_uint_16)(*(sp + 6)) + << 8) + (png_uint_16)(*(sp + 7))); + + if (a == (png_uint_16)0xffff) + { + png_uint_16 v; + + v = gamma_16[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + + v = gamma_16[*(sp + 3) >> gamma_shift][*(sp + 2)]; + *(sp + 2) = (png_byte)((v >> 8) & 0xff); + *(sp + 3) = (png_byte)(v & 0xff); + + v = gamma_16[*(sp + 5) >> gamma_shift][*(sp + 4)]; + *(sp + 4) = (png_byte)((v >> 8) & 0xff); + *(sp + 5) = (png_byte)(v & 0xff); + } + + else if (a == 0) + { + /* Background is already in screen gamma */ + *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff); + *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff); + *(sp + 2) = (png_byte)((png_ptr->background.green >> 8) + & 0xff); + *(sp + 3) = (png_byte)(png_ptr->background.green + & 0xff); + *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8) + & 0xff); + *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff); + } + + else + { + png_uint_16 v, w; + + v = gamma_16_to_1[*(sp + 1) >> gamma_shift][*sp]; + png_composite_16(w, v, a, png_ptr->background_1.red); + if (!optimize) + w = gamma_16_from_1[((w&0xff) >> gamma_shift)][w >> + 8]; + *sp = (png_byte)((w >> 8) & 0xff); + *(sp + 1) = (png_byte)(w & 0xff); + + v = gamma_16_to_1[*(sp + 3) >> gamma_shift][*(sp + 2)]; + png_composite_16(w, v, a, png_ptr->background_1.green); + if (!optimize) + w = gamma_16_from_1[((w&0xff) >> gamma_shift)][w >> + 8]; + + *(sp + 2) = (png_byte)((w >> 8) & 0xff); + *(sp + 3) = (png_byte)(w & 0xff); + + v = gamma_16_to_1[*(sp + 5) >> gamma_shift][*(sp + 4)]; + png_composite_16(w, v, a, png_ptr->background_1.blue); + if (!optimize) + w = gamma_16_from_1[((w&0xff) >> gamma_shift)][w >> + 8]; + + *(sp + 4) = (png_byte)((w >> 8) & 0xff); + *(sp + 5) = (png_byte)(w & 0xff); + } + } + } + + else +#endif + { + sp = row; + for (i = 0; i < row_width; i++, sp += 8) + { + png_uint_16 a = (png_uint_16)(((png_uint_16)(*(sp + 6)) + << 8) + (png_uint_16)(*(sp + 7))); + + if (a == 0) + { + *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff); + *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff); + *(sp + 2) = (png_byte)((png_ptr->background.green >> 8) + & 0xff); + *(sp + 3) = (png_byte)(png_ptr->background.green + & 0xff); + *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8) + & 0xff); + *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff); + } + + else if (a < 0xffff) + { + png_uint_16 v; + + png_uint_16 r = (png_uint_16)(((*sp) << 8) + *(sp + 1)); + png_uint_16 g = (png_uint_16)(((*(sp + 2)) << 8) + + *(sp + 3)); + png_uint_16 b = (png_uint_16)(((*(sp + 4)) << 8) + + *(sp + 5)); + + png_composite_16(v, r, a, png_ptr->background.red); + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + + png_composite_16(v, g, a, png_ptr->background.green); + *(sp + 2) = (png_byte)((v >> 8) & 0xff); + *(sp + 3) = (png_byte)(v & 0xff); + + png_composite_16(v, b, a, png_ptr->background.blue); + *(sp + 4) = (png_byte)((v >> 8) & 0xff); + *(sp + 5) = (png_byte)(v & 0xff); + } + } + } + } + break; + } + + default: + break; + } + } +} +#endif /* PNG_READ_BACKGROUND_SUPPORTED || PNG_READ_ALPHA_MODE_SUPPORTED */ + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* Gamma correct the image, avoiding the alpha channel. Make sure + * you do this after you deal with the transparency issue on grayscale + * or RGB images. If your bit depth is 8, use gamma_table, if it + * is 16, use gamma_16_table and gamma_shift. Build these with + * build_gamma_table(). + */ +void /* PRIVATE */ +png_do_gamma(png_row_infop row_info, png_bytep row, png_structrp png_ptr) +{ + png_const_bytep gamma_table = png_ptr->gamma_table; + png_const_uint_16pp gamma_16_table = png_ptr->gamma_16_table; + int gamma_shift = png_ptr->gamma_shift; + + png_bytep sp; + png_uint_32 i; + png_uint_32 row_width=row_info->width; + + png_debug(1, "in png_do_gamma"); + + if (((row_info->bit_depth <= 8 && gamma_table != NULL) || + (row_info->bit_depth == 16 && gamma_16_table != NULL))) + { + switch (row_info->color_type) + { + case PNG_COLOR_TYPE_RGB: + { + if (row_info->bit_depth == 8) + { + sp = row; + for (i = 0; i < row_width; i++) + { + *sp = gamma_table[*sp]; + sp++; + *sp = gamma_table[*sp]; + sp++; + *sp = gamma_table[*sp]; + sp++; + } + } + + else /* if (row_info->bit_depth == 16) */ + { + sp = row; + for (i = 0; i < row_width; i++) + { + png_uint_16 v; + + v = gamma_16_table[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + sp += 2; + + v = gamma_16_table[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + sp += 2; + + v = gamma_16_table[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + sp += 2; + } + } + break; + } + + case PNG_COLOR_TYPE_RGB_ALPHA: + { + if (row_info->bit_depth == 8) + { + sp = row; + for (i = 0; i < row_width; i++) + { + *sp = gamma_table[*sp]; + sp++; + + *sp = gamma_table[*sp]; + sp++; + + *sp = gamma_table[*sp]; + sp++; + + sp++; + } + } + + else /* if (row_info->bit_depth == 16) */ + { + sp = row; + for (i = 0; i < row_width; i++) + { + png_uint_16 v = gamma_16_table[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + sp += 2; + + v = gamma_16_table[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + sp += 2; + + v = gamma_16_table[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + sp += 4; + } + } + break; + } + + case PNG_COLOR_TYPE_GRAY_ALPHA: + { + if (row_info->bit_depth == 8) + { + sp = row; + for (i = 0; i < row_width; i++) + { + *sp = gamma_table[*sp]; + sp += 2; + } + } + + else /* if (row_info->bit_depth == 16) */ + { + sp = row; + for (i = 0; i < row_width; i++) + { + png_uint_16 v = gamma_16_table[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + sp += 4; + } + } + break; + } + + case PNG_COLOR_TYPE_GRAY: + { + if (row_info->bit_depth == 2) + { + sp = row; + for (i = 0; i < row_width; i += 4) + { + int a = *sp & 0xc0; + int b = *sp & 0x30; + int c = *sp & 0x0c; + int d = *sp & 0x03; + + *sp = (png_byte)( + ((((int)gamma_table[a|(a>>2)|(a>>4)|(a>>6)]) ) & 0xc0)| + ((((int)gamma_table[(b<<2)|b|(b>>2)|(b>>4)])>>2) & 0x30)| + ((((int)gamma_table[(c<<4)|(c<<2)|c|(c>>2)])>>4) & 0x0c)| + ((((int)gamma_table[(d<<6)|(d<<4)|(d<<2)|d])>>6) )); + sp++; + } + } + + if (row_info->bit_depth == 4) + { + sp = row; + for (i = 0; i < row_width; i += 2) + { + int msb = *sp & 0xf0; + int lsb = *sp & 0x0f; + + *sp = (png_byte)((((int)gamma_table[msb | (msb >> 4)]) & 0xf0) + | (((int)gamma_table[(lsb << 4) | lsb]) >> 4)); + sp++; + } + } + + else if (row_info->bit_depth == 8) + { + sp = row; + for (i = 0; i < row_width; i++) + { + *sp = gamma_table[*sp]; + sp++; + } + } + + else if (row_info->bit_depth == 16) + { + sp = row; + for (i = 0; i < row_width; i++) + { + png_uint_16 v = gamma_16_table[*(sp + 1) >> gamma_shift][*sp]; + *sp = (png_byte)((v >> 8) & 0xff); + *(sp + 1) = (png_byte)(v & 0xff); + sp += 2; + } + } + break; + } + + default: + break; + } + } +} +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED +/* Encode the alpha channel to the output gamma (the input channel is always + * linear.) Called only with color types that have an alpha channel. Needs the + * from_1 tables. + */ +void /* PRIVATE */ +png_do_encode_alpha(png_row_infop row_info, png_bytep row, png_structrp png_ptr) +{ + png_uint_32 row_width = row_info->width; + + png_debug(1, "in png_do_encode_alpha"); + + if (row_info->color_type & PNG_COLOR_MASK_ALPHA) + { + if (row_info->bit_depth == 8) + { + PNG_CONST png_bytep table = png_ptr->gamma_from_1; + + if (table != NULL) + { + PNG_CONST int step = + (row_info->color_type & PNG_COLOR_MASK_COLOR) ? 4 : 2; + + /* The alpha channel is the last component: */ + row += step - 1; + + for (; row_width > 0; --row_width, row += step) + *row = table[*row]; + + return; + } + } + + else if (row_info->bit_depth == 16) + { + PNG_CONST png_uint_16pp table = png_ptr->gamma_16_from_1; + PNG_CONST int gamma_shift = png_ptr->gamma_shift; + + if (table != NULL) + { + PNG_CONST int step = + (row_info->color_type & PNG_COLOR_MASK_COLOR) ? 8 : 4; + + /* The alpha channel is the last component: */ + row += step - 2; + + for (; row_width > 0; --row_width, row += step) + { + png_uint_16 v; + + v = table[*(row + 1) >> gamma_shift][*row]; + *row = (png_byte)((v >> 8) & 0xff); + *(row + 1) = (png_byte)(v & 0xff); + } + + return; + } + } + } + + /* Only get to here if called with a weird row_info; no harm has been done, + * so just issue a warning. + */ + png_warning(png_ptr, "png_do_encode_alpha: unexpected call"); +} +#endif + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* Expands a palette row to an RGB or RGBA row depending + * upon whether you supply trans and num_trans. + */ +void /* PRIVATE */ +png_do_expand_palette(png_row_infop row_info, png_bytep row, + png_const_colorp palette, png_const_bytep trans_alpha, int num_trans) +{ + int shift, value; + png_bytep sp, dp; + png_uint_32 i; + png_uint_32 row_width=row_info->width; + + png_debug(1, "in png_do_expand_palette"); + + if (row_info->color_type == PNG_COLOR_TYPE_PALETTE) + { + if (row_info->bit_depth < 8) + { + switch (row_info->bit_depth) + { + case 1: + { + sp = row + (png_size_t)((row_width - 1) >> 3); + dp = row + (png_size_t)row_width - 1; + shift = 7 - (int)((row_width + 7) & 0x07); + for (i = 0; i < row_width; i++) + { + if ((*sp >> shift) & 0x01) + *dp = 1; + + else + *dp = 0; + + if (shift == 7) + { + shift = 0; + sp--; + } + + else + shift++; + + dp--; + } + break; + } + + case 2: + { + sp = row + (png_size_t)((row_width - 1) >> 2); + dp = row + (png_size_t)row_width - 1; + shift = (int)((3 - ((row_width + 3) & 0x03)) << 1); + for (i = 0; i < row_width; i++) + { + value = (*sp >> shift) & 0x03; + *dp = (png_byte)value; + if (shift == 6) + { + shift = 0; + sp--; + } + + else + shift += 2; + + dp--; + } + break; + } + + case 4: + { + sp = row + (png_size_t)((row_width - 1) >> 1); + dp = row + (png_size_t)row_width - 1; + shift = (int)((row_width & 0x01) << 2); + for (i = 0; i < row_width; i++) + { + value = (*sp >> shift) & 0x0f; + *dp = (png_byte)value; + if (shift == 4) + { + shift = 0; + sp--; + } + + else + shift += 4; + + dp--; + } + break; + } + + default: + break; + } + row_info->bit_depth = 8; + row_info->pixel_depth = 8; + row_info->rowbytes = row_width; + } + + if (row_info->bit_depth == 8) + { + { + if (num_trans > 0) + { + sp = row + (png_size_t)row_width - 1; + dp = row + (png_size_t)(row_width << 2) - 1; + + for (i = 0; i < row_width; i++) + { + if ((int)(*sp) >= num_trans) + *dp-- = 0xff; + + else + *dp-- = trans_alpha[*sp]; + + *dp-- = palette[*sp].blue; + *dp-- = palette[*sp].green; + *dp-- = palette[*sp].red; + sp--; + } + row_info->bit_depth = 8; + row_info->pixel_depth = 32; + row_info->rowbytes = row_width * 4; + row_info->color_type = 6; + row_info->channels = 4; + } + + else + { + sp = row + (png_size_t)row_width - 1; + dp = row + (png_size_t)(row_width * 3) - 1; + + for (i = 0; i < row_width; i++) + { + *dp-- = palette[*sp].blue; + *dp-- = palette[*sp].green; + *dp-- = palette[*sp].red; + sp--; + } + + row_info->bit_depth = 8; + row_info->pixel_depth = 24; + row_info->rowbytes = row_width * 3; + row_info->color_type = 2; + row_info->channels = 3; + } + } + } + } +} + +/* If the bit depth < 8, it is expanded to 8. Also, if the already + * expanded transparency value is supplied, an alpha channel is built. + */ +void /* PRIVATE */ +png_do_expand(png_row_infop row_info, png_bytep row, + png_const_color_16p trans_color) +{ + int shift, value; + png_bytep sp, dp; + png_uint_32 i; + png_uint_32 row_width=row_info->width; + + png_debug(1, "in png_do_expand"); + + { + if (row_info->color_type == PNG_COLOR_TYPE_GRAY) + { + unsigned int gray = trans_color ? trans_color->gray : 0; + + if (row_info->bit_depth < 8) + { + switch (row_info->bit_depth) + { + case 1: + { + gray = (gray & 0x01) * 0xff; + sp = row + (png_size_t)((row_width - 1) >> 3); + dp = row + (png_size_t)row_width - 1; + shift = 7 - (int)((row_width + 7) & 0x07); + for (i = 0; i < row_width; i++) + { + if ((*sp >> shift) & 0x01) + *dp = 0xff; + + else + *dp = 0; + + if (shift == 7) + { + shift = 0; + sp--; + } + + else + shift++; + + dp--; + } + break; + } + + case 2: + { + gray = (gray & 0x03) * 0x55; + sp = row + (png_size_t)((row_width - 1) >> 2); + dp = row + (png_size_t)row_width - 1; + shift = (int)((3 - ((row_width + 3) & 0x03)) << 1); + for (i = 0; i < row_width; i++) + { + value = (*sp >> shift) & 0x03; + *dp = (png_byte)(value | (value << 2) | (value << 4) | + (value << 6)); + if (shift == 6) + { + shift = 0; + sp--; + } + + else + shift += 2; + + dp--; + } + break; + } + + case 4: + { + gray = (gray & 0x0f) * 0x11; + sp = row + (png_size_t)((row_width - 1) >> 1); + dp = row + (png_size_t)row_width - 1; + shift = (int)((1 - ((row_width + 1) & 0x01)) << 2); + for (i = 0; i < row_width; i++) + { + value = (*sp >> shift) & 0x0f; + *dp = (png_byte)(value | (value << 4)); + if (shift == 4) + { + shift = 0; + sp--; + } + + else + shift = 4; + + dp--; + } + break; + } + + default: + break; + } + + row_info->bit_depth = 8; + row_info->pixel_depth = 8; + row_info->rowbytes = row_width; + } + + if (trans_color != NULL) + { + if (row_info->bit_depth == 8) + { + gray = gray & 0xff; + sp = row + (png_size_t)row_width - 1; + dp = row + (png_size_t)(row_width << 1) - 1; + + for (i = 0; i < row_width; i++) + { + if (*sp == gray) + *dp-- = 0; + + else + *dp-- = 0xff; + + *dp-- = *sp--; + } + } + + else if (row_info->bit_depth == 16) + { + unsigned int gray_high = (gray >> 8) & 0xff; + unsigned int gray_low = gray & 0xff; + sp = row + row_info->rowbytes - 1; + dp = row + (row_info->rowbytes << 1) - 1; + for (i = 0; i < row_width; i++) + { + if (*(sp - 1) == gray_high && *(sp) == gray_low) + { + *dp-- = 0; + *dp-- = 0; + } + + else + { + *dp-- = 0xff; + *dp-- = 0xff; + } + + *dp-- = *sp--; + *dp-- = *sp--; + } + } + + row_info->color_type = PNG_COLOR_TYPE_GRAY_ALPHA; + row_info->channels = 2; + row_info->pixel_depth = (png_byte)(row_info->bit_depth << 1); + row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, + row_width); + } + } + else if (row_info->color_type == PNG_COLOR_TYPE_RGB && trans_color) + { + if (row_info->bit_depth == 8) + { + png_byte red = (png_byte)(trans_color->red & 0xff); + png_byte green = (png_byte)(trans_color->green & 0xff); + png_byte blue = (png_byte)(trans_color->blue & 0xff); + sp = row + (png_size_t)row_info->rowbytes - 1; + dp = row + (png_size_t)(row_width << 2) - 1; + for (i = 0; i < row_width; i++) + { + if (*(sp - 2) == red && *(sp - 1) == green && *(sp) == blue) + *dp-- = 0; + + else + *dp-- = 0xff; + + *dp-- = *sp--; + *dp-- = *sp--; + *dp-- = *sp--; + } + } + else if (row_info->bit_depth == 16) + { + png_byte red_high = (png_byte)((trans_color->red >> 8) & 0xff); + png_byte green_high = (png_byte)((trans_color->green >> 8) & 0xff); + png_byte blue_high = (png_byte)((trans_color->blue >> 8) & 0xff); + png_byte red_low = (png_byte)(trans_color->red & 0xff); + png_byte green_low = (png_byte)(trans_color->green & 0xff); + png_byte blue_low = (png_byte)(trans_color->blue & 0xff); + sp = row + row_info->rowbytes - 1; + dp = row + (png_size_t)(row_width << 3) - 1; + for (i = 0; i < row_width; i++) + { + if (*(sp - 5) == red_high && + *(sp - 4) == red_low && + *(sp - 3) == green_high && + *(sp - 2) == green_low && + *(sp - 1) == blue_high && + *(sp ) == blue_low) + { + *dp-- = 0; + *dp-- = 0; + } + + else + { + *dp-- = 0xff; + *dp-- = 0xff; + } + + *dp-- = *sp--; + *dp-- = *sp--; + *dp-- = *sp--; + *dp-- = *sp--; + *dp-- = *sp--; + *dp-- = *sp--; + } + } + row_info->color_type = PNG_COLOR_TYPE_RGB_ALPHA; + row_info->channels = 4; + row_info->pixel_depth = (png_byte)(row_info->bit_depth << 2); + row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, row_width); + } + } +} +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* If the bit depth is 8 and the color type is not a palette type expand the + * whole row to 16 bits. Has no effect otherwise. + */ +void /* PRIVATE */ +png_do_expand_16(png_row_infop row_info, png_bytep row) +{ + if (row_info->bit_depth == 8 && + row_info->color_type != PNG_COLOR_TYPE_PALETTE) + { + /* The row have a sequence of bytes containing [0..255] and we need + * to turn it into another row containing [0..65535], to do this we + * calculate: + * + * (input / 255) * 65535 + * + * Which happens to be exactly input * 257 and this can be achieved + * simply by byte replication in place (copying backwards). + */ + png_byte *sp = row + row_info->rowbytes; /* source, last byte + 1 */ + png_byte *dp = sp + row_info->rowbytes; /* destination, end + 1 */ + while (dp > sp) + dp[-2] = dp[-1] = *--sp, dp -= 2; + + row_info->rowbytes *= 2; + row_info->bit_depth = 16; + row_info->pixel_depth = (png_byte)(row_info->channels * 16); + } +} +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +void /* PRIVATE */ +png_do_quantize(png_row_infop row_info, png_bytep row, + png_const_bytep palette_lookup, png_const_bytep quantize_lookup) +{ + png_bytep sp, dp; + png_uint_32 i; + png_uint_32 row_width=row_info->width; + + png_debug(1, "in png_do_quantize"); + + if (row_info->bit_depth == 8) + { + if (row_info->color_type == PNG_COLOR_TYPE_RGB && palette_lookup) + { + int r, g, b, p; + sp = row; + dp = row; + for (i = 0; i < row_width; i++) + { + r = *sp++; + g = *sp++; + b = *sp++; + + /* This looks real messy, but the compiler will reduce + * it down to a reasonable formula. For example, with + * 5 bits per color, we get: + * p = (((r >> 3) & 0x1f) << 10) | + * (((g >> 3) & 0x1f) << 5) | + * ((b >> 3) & 0x1f); + */ + p = (((r >> (8 - PNG_QUANTIZE_RED_BITS)) & + ((1 << PNG_QUANTIZE_RED_BITS) - 1)) << + (PNG_QUANTIZE_GREEN_BITS + PNG_QUANTIZE_BLUE_BITS)) | + (((g >> (8 - PNG_QUANTIZE_GREEN_BITS)) & + ((1 << PNG_QUANTIZE_GREEN_BITS) - 1)) << + (PNG_QUANTIZE_BLUE_BITS)) | + ((b >> (8 - PNG_QUANTIZE_BLUE_BITS)) & + ((1 << PNG_QUANTIZE_BLUE_BITS) - 1)); + + *dp++ = palette_lookup[p]; + } + + row_info->color_type = PNG_COLOR_TYPE_PALETTE; + row_info->channels = 1; + row_info->pixel_depth = row_info->bit_depth; + row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, row_width); + } + + else if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA && + palette_lookup != NULL) + { + int r, g, b, p; + sp = row; + dp = row; + for (i = 0; i < row_width; i++) + { + r = *sp++; + g = *sp++; + b = *sp++; + sp++; + + p = (((r >> (8 - PNG_QUANTIZE_RED_BITS)) & + ((1 << PNG_QUANTIZE_RED_BITS) - 1)) << + (PNG_QUANTIZE_GREEN_BITS + PNG_QUANTIZE_BLUE_BITS)) | + (((g >> (8 - PNG_QUANTIZE_GREEN_BITS)) & + ((1 << PNG_QUANTIZE_GREEN_BITS) - 1)) << + (PNG_QUANTIZE_BLUE_BITS)) | + ((b >> (8 - PNG_QUANTIZE_BLUE_BITS)) & + ((1 << PNG_QUANTIZE_BLUE_BITS) - 1)); + + *dp++ = palette_lookup[p]; + } + + row_info->color_type = PNG_COLOR_TYPE_PALETTE; + row_info->channels = 1; + row_info->pixel_depth = row_info->bit_depth; + row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, row_width); + } + + else if (row_info->color_type == PNG_COLOR_TYPE_PALETTE && + quantize_lookup) + { + sp = row; + + for (i = 0; i < row_width; i++, sp++) + { + *sp = quantize_lookup[*sp]; + } + } + } +} +#endif /* PNG_READ_QUANTIZE_SUPPORTED */ +#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ + +#ifdef PNG_MNG_FEATURES_SUPPORTED +/* Undoes intrapixel differencing */ +void /* PRIVATE */ +png_do_read_intrapixel(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_read_intrapixel"); + + if ( + (row_info->color_type & PNG_COLOR_MASK_COLOR)) + { + int bytes_per_pixel; + png_uint_32 row_width = row_info->width; + + if (row_info->bit_depth == 8) + { + png_bytep rp; + png_uint_32 i; + + if (row_info->color_type == PNG_COLOR_TYPE_RGB) + bytes_per_pixel = 3; + + else if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + bytes_per_pixel = 4; + + else + return; + + for (i = 0, rp = row; i < row_width; i++, rp += bytes_per_pixel) + { + *(rp) = (png_byte)((256 + *rp + *(rp + 1)) & 0xff); + *(rp+2) = (png_byte)((256 + *(rp + 2) + *(rp + 1)) & 0xff); + } + } + else if (row_info->bit_depth == 16) + { + png_bytep rp; + png_uint_32 i; + + if (row_info->color_type == PNG_COLOR_TYPE_RGB) + bytes_per_pixel = 6; + + else if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + bytes_per_pixel = 8; + + else + return; + + for (i = 0, rp = row; i < row_width; i++, rp += bytes_per_pixel) + { + png_uint_32 s0 = (*(rp ) << 8) | *(rp + 1); + png_uint_32 s1 = (*(rp + 2) << 8) | *(rp + 3); + png_uint_32 s2 = (*(rp + 4) << 8) | *(rp + 5); + png_uint_32 red = (s0 + s1 + 65536) & 0xffff; + png_uint_32 blue = (s2 + s1 + 65536) & 0xffff; + *(rp ) = (png_byte)((red >> 8) & 0xff); + *(rp + 1) = (png_byte)(red & 0xff); + *(rp + 4) = (png_byte)((blue >> 8) & 0xff); + *(rp + 5) = (png_byte)(blue & 0xff); + } + } + } +} +#endif /* PNG_MNG_FEATURES_SUPPORTED */ +#endif /* PNG_READ_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngrutil.c b/src/SDL2/external/libpng-1.6.2/pngrutil.c new file mode 100644 index 000000000..01c3679df --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngrutil.c @@ -0,0 +1,4462 @@ + +/* pngrutil.c - utilities to read a PNG file + * + * Last changed in libpng 1.6.2 [April 25, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * This file contains routines that are only called from within + * libpng itself during the course of reading an image. + */ + +#include "pngpriv.h" + +#ifdef PNG_READ_SUPPORTED + +#define png_strtod(p,a,b) strtod(a,b) + +png_uint_32 PNGAPI +png_get_uint_31(png_const_structrp png_ptr, png_const_bytep buf) +{ + png_uint_32 uval = png_get_uint_32(buf); + + if (uval > PNG_UINT_31_MAX) + png_error(png_ptr, "PNG unsigned integer out of range"); + + return (uval); +} + +#if defined(PNG_READ_gAMA_SUPPORTED) || defined(PNG_READ_cHRM_SUPPORTED) +/* The following is a variation on the above for use with the fixed + * point values used for gAMA and cHRM. Instead of png_error it + * issues a warning and returns (-1) - an invalid value because both + * gAMA and cHRM use *unsigned* integers for fixed point values. + */ +#define PNG_FIXED_ERROR (-1) + +static png_fixed_point /* PRIVATE */ +png_get_fixed_point(png_structrp png_ptr, png_const_bytep buf) +{ + png_uint_32 uval = png_get_uint_32(buf); + + if (uval <= PNG_UINT_31_MAX) + return (png_fixed_point)uval; /* known to be in range */ + + /* The caller can turn off the warning by passing NULL. */ + if (png_ptr != NULL) + png_warning(png_ptr, "PNG fixed point integer out of range"); + + return PNG_FIXED_ERROR; +} +#endif + +#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED +/* NOTE: the read macros will obscure these definitions, so that if + * PNG_USE_READ_MACROS is set the library will not use them internally, + * but the APIs will still be available externally. + * + * The parentheses around "PNGAPI function_name" in the following three + * functions are necessary because they allow the macros to co-exist with + * these (unused but exported) functions. + */ + +/* Grab an unsigned 32-bit integer from a buffer in big-endian format. */ +png_uint_32 (PNGAPI +png_get_uint_32)(png_const_bytep buf) +{ + png_uint_32 uval = + ((png_uint_32)(*(buf )) << 24) + + ((png_uint_32)(*(buf + 1)) << 16) + + ((png_uint_32)(*(buf + 2)) << 8) + + ((png_uint_32)(*(buf + 3)) ) ; + + return uval; +} + +/* Grab a signed 32-bit integer from a buffer in big-endian format. The + * data is stored in the PNG file in two's complement format and there + * is no guarantee that a 'png_int_32' is exactly 32 bits, therefore + * the following code does a two's complement to native conversion. + */ +png_int_32 (PNGAPI +png_get_int_32)(png_const_bytep buf) +{ + png_uint_32 uval = png_get_uint_32(buf); + if ((uval & 0x80000000) == 0) /* non-negative */ + return uval; + + uval = (uval ^ 0xffffffff) + 1; /* 2's complement: -x = ~x+1 */ + return -(png_int_32)uval; +} + +/* Grab an unsigned 16-bit integer from a buffer in big-endian format. */ +png_uint_16 (PNGAPI +png_get_uint_16)(png_const_bytep buf) +{ + /* ANSI-C requires an int value to accomodate at least 16 bits so this + * works and allows the compiler not to worry about possible narrowing + * on 32 bit systems. (Pre-ANSI systems did not make integers smaller + * than 16 bits either.) + */ + unsigned int val = + ((unsigned int)(*buf) << 8) + + ((unsigned int)(*(buf + 1))); + + return (png_uint_16)val; +} + +#endif /* PNG_READ_INT_FUNCTIONS_SUPPORTED */ + +/* Read and check the PNG file signature */ +void /* PRIVATE */ +png_read_sig(png_structrp png_ptr, png_inforp info_ptr) +{ + png_size_t num_checked, num_to_check; + + /* Exit if the user application does not expect a signature. */ + if (png_ptr->sig_bytes >= 8) + return; + + num_checked = png_ptr->sig_bytes; + num_to_check = 8 - num_checked; + +#ifdef PNG_IO_STATE_SUPPORTED + png_ptr->io_state = PNG_IO_READING | PNG_IO_SIGNATURE; +#endif + + /* The signature must be serialized in a single I/O call. */ + png_read_data(png_ptr, &(info_ptr->signature[num_checked]), num_to_check); + png_ptr->sig_bytes = 8; + + if (png_sig_cmp(info_ptr->signature, num_checked, num_to_check)) + { + if (num_checked < 4 && + png_sig_cmp(info_ptr->signature, num_checked, num_to_check - 4)) + png_error(png_ptr, "Not a PNG file"); + else + png_error(png_ptr, "PNG file corrupted by ASCII conversion"); + } + if (num_checked < 3) + png_ptr->mode |= PNG_HAVE_PNG_SIGNATURE; +} + +/* Read the chunk header (length + type name). + * Put the type name into png_ptr->chunk_name, and return the length. + */ +png_uint_32 /* PRIVATE */ +png_read_chunk_header(png_structrp png_ptr) +{ + png_byte buf[8]; + png_uint_32 length; + +#ifdef PNG_IO_STATE_SUPPORTED + png_ptr->io_state = PNG_IO_READING | PNG_IO_CHUNK_HDR; +#endif + + /* Read the length and the chunk name. + * This must be performed in a single I/O call. + */ + png_read_data(png_ptr, buf, 8); + length = png_get_uint_31(png_ptr, buf); + + /* Put the chunk name into png_ptr->chunk_name. */ + png_ptr->chunk_name = PNG_CHUNK_FROM_STRING(buf+4); + + png_debug2(0, "Reading %lx chunk, length = %lu", + (unsigned long)png_ptr->chunk_name, (unsigned long)length); + + /* Reset the crc and run it over the chunk name. */ + png_reset_crc(png_ptr); + png_calculate_crc(png_ptr, buf + 4, 4); + + /* Check to see if chunk name is valid. */ + png_check_chunk_name(png_ptr, png_ptr->chunk_name); + +#ifdef PNG_IO_STATE_SUPPORTED + png_ptr->io_state = PNG_IO_READING | PNG_IO_CHUNK_DATA; +#endif + + return length; +} + +/* Read data, and (optionally) run it through the CRC. */ +void /* PRIVATE */ +png_crc_read(png_structrp png_ptr, png_bytep buf, png_uint_32 length) +{ + if (png_ptr == NULL) + return; + + png_read_data(png_ptr, buf, length); + png_calculate_crc(png_ptr, buf, length); +} + +/* Optionally skip data and then check the CRC. Depending on whether we + * are reading an ancillary or critical chunk, and how the program has set + * things up, we may calculate the CRC on the data and print a message. + * Returns '1' if there was a CRC error, '0' otherwise. + */ +int /* PRIVATE */ +png_crc_finish(png_structrp png_ptr, png_uint_32 skip) +{ + /* The size of the local buffer for inflate is a good guess as to a + * reasonable size to use for buffering reads from the application. + */ + while (skip > 0) + { + png_uint_32 len; + png_byte tmpbuf[PNG_INFLATE_BUF_SIZE]; + + len = (sizeof tmpbuf); + if (len > skip) + len = skip; + skip -= len; + + png_crc_read(png_ptr, tmpbuf, len); + } + + if (png_crc_error(png_ptr)) + { + if (PNG_CHUNK_ANCILLARY(png_ptr->chunk_name) ? + !(png_ptr->flags & PNG_FLAG_CRC_ANCILLARY_NOWARN) : + (png_ptr->flags & PNG_FLAG_CRC_CRITICAL_USE)) + { + png_chunk_warning(png_ptr, "CRC error"); + } + + else + { + png_chunk_benign_error(png_ptr, "CRC error"); + return (0); + } + + return (1); + } + + return (0); +} + +/* Compare the CRC stored in the PNG file with that calculated by libpng from + * the data it has read thus far. + */ +int /* PRIVATE */ +png_crc_error(png_structrp png_ptr) +{ + png_byte crc_bytes[4]; + png_uint_32 crc; + int need_crc = 1; + + if (PNG_CHUNK_ANCILLARY(png_ptr->chunk_name)) + { + if ((png_ptr->flags & PNG_FLAG_CRC_ANCILLARY_MASK) == + (PNG_FLAG_CRC_ANCILLARY_USE | PNG_FLAG_CRC_ANCILLARY_NOWARN)) + need_crc = 0; + } + + else /* critical */ + { + if (png_ptr->flags & PNG_FLAG_CRC_CRITICAL_IGNORE) + need_crc = 0; + } + +#ifdef PNG_IO_STATE_SUPPORTED + png_ptr->io_state = PNG_IO_READING | PNG_IO_CHUNK_CRC; +#endif + + /* The chunk CRC must be serialized in a single I/O call. */ + png_read_data(png_ptr, crc_bytes, 4); + + if (need_crc) + { + crc = png_get_uint_32(crc_bytes); + return ((int)(crc != png_ptr->crc)); + } + + else + return (0); +} + +/* Manage the read buffer; this simply reallocates the buffer if it is not small + * enough (or if it is not allocated). The routine returns a pointer to the + * buffer; if an error occurs and 'warn' is set the routine returns NULL, else + * it will call png_error (via png_malloc) on failure. (warn == 2 means + * 'silent'). + */ +static png_bytep +png_read_buffer(png_structrp png_ptr, png_alloc_size_t new_size, int warn) +{ + png_bytep buffer = png_ptr->read_buffer; + + if (buffer != NULL && new_size > png_ptr->read_buffer_size) + { + png_ptr->read_buffer = NULL; + png_ptr->read_buffer = NULL; + png_ptr->read_buffer_size = 0; + png_free(png_ptr, buffer); + buffer = NULL; + } + + if (buffer == NULL) + { + buffer = png_voidcast(png_bytep, png_malloc_base(png_ptr, new_size)); + + if (buffer != NULL) + { + png_ptr->read_buffer = buffer; + png_ptr->read_buffer_size = new_size; + } + + else if (warn < 2) /* else silent */ + { +#ifdef PNG_WARNINGS_SUPPORTED + if (warn) + png_chunk_warning(png_ptr, "insufficient memory to read chunk"); + else +#endif + { +#ifdef PNG_ERROR_TEXT_SUPPORTED + png_chunk_error(png_ptr, "insufficient memory to read chunk"); +#endif + } + } + } + + return buffer; +} + +/* png_inflate_claim: claim the zstream for some nefarious purpose that involves + * decompression. Returns Z_OK on success, else a zlib error code. It checks + * the owner but, in final release builds, just issues a warning if some other + * chunk apparently owns the stream. Prior to release it does a png_error. + */ +static int +png_inflate_claim(png_structrp png_ptr, png_uint_32 owner, int window_bits) +{ + if (png_ptr->zowner != 0) + { + char msg[64]; + + PNG_STRING_FROM_CHUNK(msg, png_ptr->zowner); + /* So the message that results is " using zstream"; this is an + * internal error, but is very useful for debugging. i18n requirements + * are minimal. + */ + (void)png_safecat(msg, (sizeof msg), 4, " using zstream"); +# if PNG_LIBPNG_BUILD_BASE_TYPE >= PNG_LIBPNG_BUILD_RC + png_chunk_warning(png_ptr, msg); + png_ptr->zowner = 0; +# else + png_chunk_error(png_ptr, msg); +# endif + } + + /* Implementation note: unlike 'png_deflate_claim' this internal function + * does not take the size of the data as an argument. Some efficiency could + * be gained by using this when it is known *if* the zlib stream itself does + * not record the number; however, this is an illusion: the original writer + * of the PNG may have selected a lower window size, and we really must + * follow that because, for systems with with limited capabilities, we + * would otherwise reject the application's attempts to use a smaller window + * size (zlib doesn't have an interface to say "this or lower"!). + * + * inflateReset2 was added to zlib 1.2.4; before this the window could not be + * reset, therefore it is necessary to always allocate the maximum window + * size with earlier zlibs just in case later compressed chunks need it. + */ + { + int ret; /* zlib return code */ + + /* Set this for safety, just in case the previous owner left pointers to + * memory allocations. + */ + png_ptr->zstream.next_in = NULL; + png_ptr->zstream.avail_in = 0; + png_ptr->zstream.next_out = NULL; + png_ptr->zstream.avail_out = 0; + + if (png_ptr->flags & PNG_FLAG_ZSTREAM_INITIALIZED) + { +# if ZLIB_VERNUM < 0x1240 + PNG_UNUSED(window_bits) + ret = inflateReset(&png_ptr->zstream); +# else + ret = inflateReset2(&png_ptr->zstream, window_bits); +# endif + } + + else + { +# if ZLIB_VERNUM < 0x1240 + ret = inflateInit(&png_ptr->zstream); +# else + ret = inflateInit2(&png_ptr->zstream, window_bits); +# endif + + if (ret == Z_OK) + png_ptr->flags |= PNG_FLAG_ZSTREAM_INITIALIZED; + } + + if (ret == Z_OK) + png_ptr->zowner = owner; + + else + png_zstream_error(png_ptr, ret); + + return ret; + } +} + +#ifdef PNG_READ_COMPRESSED_TEXT_SUPPORTED +/* png_inflate now returns zlib error codes including Z_OK and Z_STREAM_END to + * allow the caller to do multiple calls if required. If the 'finish' flag is + * set Z_FINISH will be passed to the final inflate() call and Z_STREAM_END must + * be returned or there has been a problem, otherwise Z_SYNC_FLUSH is used and + * Z_OK or Z_STREAM_END will be returned on success. + * + * The input and output sizes are updated to the actual amounts of data consumed + * or written, not the amount available (as in a z_stream). The data pointers + * are not changed, so the next input is (data+input_size) and the next + * available output is (output+output_size). + */ +static int +png_inflate(png_structrp png_ptr, png_uint_32 owner, int finish, + /* INPUT: */ png_const_bytep input, png_uint_32p input_size_ptr, + /* OUTPUT: */ png_bytep output, png_alloc_size_t *output_size_ptr) +{ + if (png_ptr->zowner == owner) /* Else not claimed */ + { + int ret; + png_alloc_size_t avail_out = *output_size_ptr; + png_uint_32 avail_in = *input_size_ptr; + + /* zlib can't necessarily handle more than 65535 bytes at once (i.e. it + * can't even necessarily handle 65536 bytes) because the type uInt is + * "16 bits or more". Consequently it is necessary to chunk the input to + * zlib. This code uses ZLIB_IO_MAX, from pngpriv.h, as the maximum (the + * maximum value that can be stored in a uInt.) It is possible to set + * ZLIB_IO_MAX to a lower value in pngpriv.h and this may sometimes have + * a performance advantage, because it reduces the amount of data accessed + * at each step and that may give the OS more time to page it in. + */ + png_ptr->zstream.next_in = PNGZ_INPUT_CAST(input); + /* avail_in and avail_out are set below from 'size' */ + png_ptr->zstream.avail_in = 0; + png_ptr->zstream.avail_out = 0; + + /* Read directly into the output if it is available (this is set to + * a local buffer below if output is NULL). + */ + if (output != NULL) + png_ptr->zstream.next_out = output; + + do + { + uInt avail; + Byte local_buffer[PNG_INFLATE_BUF_SIZE]; + + /* zlib INPUT BUFFER */ + /* The setting of 'avail_in' used to be outside the loop; by setting it + * inside it is possible to chunk the input to zlib and simply rely on + * zlib to advance the 'next_in' pointer. This allows arbitrary + * amounts of data to be passed through zlib at the unavoidable cost of + * requiring a window save (memcpy of up to 32768 output bytes) + * every ZLIB_IO_MAX input bytes. + */ + avail_in += png_ptr->zstream.avail_in; /* not consumed last time */ + + avail = ZLIB_IO_MAX; + + if (avail_in < avail) + avail = (uInt)avail_in; /* safe: < than ZLIB_IO_MAX */ + + avail_in -= avail; + png_ptr->zstream.avail_in = avail; + + /* zlib OUTPUT BUFFER */ + avail_out += png_ptr->zstream.avail_out; /* not written last time */ + + avail = ZLIB_IO_MAX; /* maximum zlib can process */ + + if (output == NULL) + { + /* Reset the output buffer each time round if output is NULL and + * make available the full buffer, up to 'remaining_space' + */ + png_ptr->zstream.next_out = local_buffer; + if ((sizeof local_buffer) < avail) + avail = (sizeof local_buffer); + } + + if (avail_out < avail) + avail = (uInt)avail_out; /* safe: < ZLIB_IO_MAX */ + + png_ptr->zstream.avail_out = avail; + avail_out -= avail; + + /* zlib inflate call */ + /* In fact 'avail_out' may be 0 at this point, that happens at the end + * of the read when the final LZ end code was not passed at the end of + * the previous chunk of input data. Tell zlib if we have reached the + * end of the output buffer. + */ + ret = inflate(&png_ptr->zstream, avail_out > 0 ? Z_NO_FLUSH : + (finish ? Z_FINISH : Z_SYNC_FLUSH)); + } while (ret == Z_OK); + + /* For safety kill the local buffer pointer now */ + if (output == NULL) + png_ptr->zstream.next_out = NULL; + + /* Claw back the 'size' and 'remaining_space' byte counts. */ + avail_in += png_ptr->zstream.avail_in; + avail_out += png_ptr->zstream.avail_out; + + /* Update the input and output sizes; the updated values are the amount + * consumed or written, effectively the inverse of what zlib uses. + */ + if (avail_out > 0) + *output_size_ptr -= avail_out; + + if (avail_in > 0) + *input_size_ptr -= avail_in; + + /* Ensure png_ptr->zstream.msg is set (even in the success case!) */ + png_zstream_error(png_ptr, ret); + return ret; + } + + else + { + /* This is a bad internal error. The recovery assigns to the zstream msg + * pointer, which is not owned by the caller, but this is safe; it's only + * used on errors! + */ + png_ptr->zstream.msg = PNGZ_MSG_CAST("zstream unclaimed"); + return Z_STREAM_ERROR; + } +} + +/* + * Decompress trailing data in a chunk. The assumption is that read_buffer + * points at an allocated area holding the contents of a chunk with a + * trailing compressed part. What we get back is an allocated area + * holding the original prefix part and an uncompressed version of the + * trailing part (the malloc area passed in is freed). + */ +static int +png_decompress_chunk(png_structrp png_ptr, + png_uint_32 chunklength, png_uint_32 prefix_size, + png_alloc_size_t *newlength /* must be initialized to the maximum! */, + int terminate /*add a '\0' to the end of the uncompressed data*/) +{ + /* TODO: implement different limits for different types of chunk. + * + * The caller supplies *newlength set to the maximum length of the + * uncompressed data, but this routine allocates space for the prefix and + * maybe a '\0' terminator too. We have to assume that 'prefix_size' is + * limited only by the maximum chunk size. + */ + png_alloc_size_t limit = PNG_SIZE_MAX; + +# ifdef PNG_SET_CHUNK_MALLOC_LIMIT_SUPPORTED + if (png_ptr->user_chunk_malloc_max > 0 && + png_ptr->user_chunk_malloc_max < limit) + limit = png_ptr->user_chunk_malloc_max; +# elif PNG_USER_CHUNK_MALLOC_MAX > 0 + if (PNG_USER_CHUNK_MALLOC_MAX < limit) + limit = PNG_USER_CHUNK_MALLOC_MAX; +# endif + + if (limit >= prefix_size + (terminate != 0)) + { + int ret; + + limit -= prefix_size + (terminate != 0); + + if (limit < *newlength) + *newlength = limit; + + /* Now try to claim the stream; the 'warn' setting causes zlib to be told + * to use the maximum window size during inflate; this hides errors in the + * deflate header window bits value which is used if '0' is passed. In + * fact this only has an effect with zlib versions 1.2.4 and later - see + * the comments in png_inflate_claim above. + */ + ret = png_inflate_claim(png_ptr, png_ptr->chunk_name, + png_ptr->flags & PNG_FLAG_BENIGN_ERRORS_WARN ? 15 : 0); + + if (ret == Z_OK) + { + png_uint_32 lzsize = chunklength - prefix_size; + + ret = png_inflate(png_ptr, png_ptr->chunk_name, 1/*finish*/, + /* input: */ png_ptr->read_buffer + prefix_size, &lzsize, + /* output: */ NULL, newlength); + + if (ret == Z_STREAM_END) + { + /* Use 'inflateReset' here, not 'inflateReset2' because this + * preserves the previously decided window size (otherwise it would + * be necessary to store the previous window size.) In practice + * this doesn't matter anyway, because png_inflate will call inflate + * with Z_FINISH in almost all cases, so the window will not be + * maintained. + */ + if (inflateReset(&png_ptr->zstream) == Z_OK) + { + /* Because of the limit checks above we know that the new, + * expanded, size will fit in a size_t (let alone an + * png_alloc_size_t). Use png_malloc_base here to avoid an + * extra OOM message. + */ + png_alloc_size_t new_size = *newlength; + png_alloc_size_t buffer_size = prefix_size + new_size + + (terminate != 0); + png_bytep text = png_voidcast(png_bytep, png_malloc_base(png_ptr, + buffer_size)); + + if (text != NULL) + { + ret = png_inflate(png_ptr, png_ptr->chunk_name, 1/*finish*/, + png_ptr->read_buffer + prefix_size, &lzsize, + text + prefix_size, newlength); + + if (ret == Z_STREAM_END) + { + if (new_size == *newlength) + { + if (terminate) + text[prefix_size + *newlength] = 0; + + if (prefix_size > 0) + memcpy(text, png_ptr->read_buffer, prefix_size); + + { + png_bytep old_ptr = png_ptr->read_buffer; + + png_ptr->read_buffer = text; + png_ptr->read_buffer_size = buffer_size; + text = old_ptr; /* freed below */ + } + } + + else + { + /* The size changed on the second read, there can be no + * guarantee that anything is correct at this point. + * The 'msg' pointer has been set to "unexpected end of + * LZ stream", which is fine, but return an error code + * that the caller won't accept. + */ + ret = PNG_UNEXPECTED_ZLIB_RETURN; + } + } + + else if (ret == Z_OK) + ret = PNG_UNEXPECTED_ZLIB_RETURN; /* for safety */ + + /* Free the text pointer (this is the old read_buffer on + * success) + */ + png_free(png_ptr, text); + + /* This really is very benign, but it's still an error because + * the extra space may otherwise be used as a Trojan Horse. + */ + if (ret == Z_STREAM_END && + chunklength - prefix_size != lzsize) + png_chunk_benign_error(png_ptr, "extra compressed data"); + } + + else + { + /* Out of memory allocating the buffer */ + ret = Z_MEM_ERROR; + png_zstream_error(png_ptr, Z_MEM_ERROR); + } + } + + else + { + /* inflateReset failed, store the error message */ + png_zstream_error(png_ptr, ret); + + if (ret == Z_STREAM_END) + ret = PNG_UNEXPECTED_ZLIB_RETURN; + } + } + + else if (ret == Z_OK) + ret = PNG_UNEXPECTED_ZLIB_RETURN; + + /* Release the claimed stream */ + png_ptr->zowner = 0; + } + + else /* the claim failed */ if (ret == Z_STREAM_END) /* impossible! */ + ret = PNG_UNEXPECTED_ZLIB_RETURN; + + return ret; + } + + else + { + /* Application/configuration limits exceeded */ + png_zstream_error(png_ptr, Z_MEM_ERROR); + return Z_MEM_ERROR; + } +} +#endif /* PNG_READ_COMPRESSED_TEXT_SUPPORTED */ + +#ifdef PNG_READ_iCCP_SUPPORTED +/* Perform a partial read and decompress, producing 'avail_out' bytes and + * reading from the current chunk as required. + */ +static int +png_inflate_read(png_structrp png_ptr, png_bytep read_buffer, uInt read_size, + png_uint_32p chunk_bytes, png_bytep next_out, png_alloc_size_t *out_size, + int finish) +{ + if (png_ptr->zowner == png_ptr->chunk_name) + { + int ret; + + /* next_in and avail_in must have been initialized by the caller. */ + png_ptr->zstream.next_out = next_out; + png_ptr->zstream.avail_out = 0; /* set in the loop */ + + do + { + if (png_ptr->zstream.avail_in == 0) + { + if (read_size > *chunk_bytes) + read_size = (uInt)*chunk_bytes; + *chunk_bytes -= read_size; + + if (read_size > 0) + png_crc_read(png_ptr, read_buffer, read_size); + + png_ptr->zstream.next_in = read_buffer; + png_ptr->zstream.avail_in = read_size; + } + + if (png_ptr->zstream.avail_out == 0) + { + uInt avail = ZLIB_IO_MAX; + if (avail > *out_size) + avail = (uInt)*out_size; + *out_size -= avail; + + png_ptr->zstream.avail_out = avail; + } + + /* Use Z_SYNC_FLUSH when there is no more chunk data to ensure that all + * the available output is produced; this allows reading of truncated + * streams. + */ + ret = inflate(&png_ptr->zstream, + *chunk_bytes > 0 ? Z_NO_FLUSH : (finish ? Z_FINISH : Z_SYNC_FLUSH)); + } + while (ret == Z_OK && (*out_size > 0 || png_ptr->zstream.avail_out > 0)); + + *out_size += png_ptr->zstream.avail_out; + png_ptr->zstream.avail_out = 0; /* Should not be required, but is safe */ + + /* Ensure the error message pointer is always set: */ + png_zstream_error(png_ptr, ret); + return ret; + } + + else + { + png_ptr->zstream.msg = PNGZ_MSG_CAST("zstream unclaimed"); + return Z_STREAM_ERROR; + } +} +#endif + +/* Read and check the IDHR chunk */ +void /* PRIVATE */ +png_handle_IHDR(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_byte buf[13]; + png_uint_32 width, height; + int bit_depth, color_type, compression_type, filter_type; + int interlace_type; + + png_debug(1, "in png_handle_IHDR"); + + if (png_ptr->mode & PNG_HAVE_IHDR) + png_chunk_error(png_ptr, "out of place"); + + /* Check the length */ + if (length != 13) + png_chunk_error(png_ptr, "invalid"); + + png_ptr->mode |= PNG_HAVE_IHDR; + + png_crc_read(png_ptr, buf, 13); + png_crc_finish(png_ptr, 0); + + width = png_get_uint_31(png_ptr, buf); + height = png_get_uint_31(png_ptr, buf + 4); + bit_depth = buf[8]; + color_type = buf[9]; + compression_type = buf[10]; + filter_type = buf[11]; + interlace_type = buf[12]; + + /* Set internal variables */ + png_ptr->width = width; + png_ptr->height = height; + png_ptr->bit_depth = (png_byte)bit_depth; + png_ptr->interlaced = (png_byte)interlace_type; + png_ptr->color_type = (png_byte)color_type; +#ifdef PNG_MNG_FEATURES_SUPPORTED + png_ptr->filter_type = (png_byte)filter_type; +#endif + png_ptr->compression_type = (png_byte)compression_type; + + /* Find number of channels */ + switch (png_ptr->color_type) + { + default: /* invalid, png_set_IHDR calls png_error */ + case PNG_COLOR_TYPE_GRAY: + case PNG_COLOR_TYPE_PALETTE: + png_ptr->channels = 1; + break; + + case PNG_COLOR_TYPE_RGB: + png_ptr->channels = 3; + break; + + case PNG_COLOR_TYPE_GRAY_ALPHA: + png_ptr->channels = 2; + break; + + case PNG_COLOR_TYPE_RGB_ALPHA: + png_ptr->channels = 4; + break; + } + + /* Set up other useful info */ + png_ptr->pixel_depth = (png_byte)(png_ptr->bit_depth * + png_ptr->channels); + png_ptr->rowbytes = PNG_ROWBYTES(png_ptr->pixel_depth, png_ptr->width); + png_debug1(3, "bit_depth = %d", png_ptr->bit_depth); + png_debug1(3, "channels = %d", png_ptr->channels); + png_debug1(3, "rowbytes = %lu", (unsigned long)png_ptr->rowbytes); + png_set_IHDR(png_ptr, info_ptr, width, height, bit_depth, + color_type, interlace_type, compression_type, filter_type); +} + +/* Read and check the palette */ +void /* PRIVATE */ +png_handle_PLTE(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_color palette[PNG_MAX_PALETTE_LENGTH]; + int num, i; +#ifdef PNG_POINTER_INDEXING_SUPPORTED + png_colorp pal_ptr; +#endif + + png_debug(1, "in png_handle_PLTE"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + /* Moved to before the 'after IDAT' check below because otherwise duplicate + * PLTE chunks are potentially ignored (the spec says there shall not be more + * than one PLTE, the error is not treated as benign, so this check trumps + * the requirement that PLTE appears before IDAT.) + */ + else if (png_ptr->mode & PNG_HAVE_PLTE) + png_chunk_error(png_ptr, "duplicate"); + + else if (png_ptr->mode & PNG_HAVE_IDAT) + { + /* This is benign because the non-benign error happened before, when an + * IDAT was encountered in a color-mapped image with no PLTE. + */ + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + png_ptr->mode |= PNG_HAVE_PLTE; + + if (!(png_ptr->color_type & PNG_COLOR_MASK_COLOR)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "ignored in grayscale PNG"); + return; + } + +#ifndef PNG_READ_OPT_PLTE_SUPPORTED + if (png_ptr->color_type != PNG_COLOR_TYPE_PALETTE) + { + png_crc_finish(png_ptr, length); + return; + } +#endif + + if (length > 3*PNG_MAX_PALETTE_LENGTH || length % 3) + { + png_crc_finish(png_ptr, length); + + if (png_ptr->color_type != PNG_COLOR_TYPE_PALETTE) + png_chunk_benign_error(png_ptr, "invalid"); + + else + png_chunk_error(png_ptr, "invalid"); + + return; + } + + /* The cast is safe because 'length' is less than 3*PNG_MAX_PALETTE_LENGTH */ + num = (int)length / 3; + +#ifdef PNG_POINTER_INDEXING_SUPPORTED + for (i = 0, pal_ptr = palette; i < num; i++, pal_ptr++) + { + png_byte buf[3]; + + png_crc_read(png_ptr, buf, 3); + pal_ptr->red = buf[0]; + pal_ptr->green = buf[1]; + pal_ptr->blue = buf[2]; + } +#else + for (i = 0; i < num; i++) + { + png_byte buf[3]; + + png_crc_read(png_ptr, buf, 3); + /* Don't depend upon png_color being any order */ + palette[i].red = buf[0]; + palette[i].green = buf[1]; + palette[i].blue = buf[2]; + } +#endif + + /* If we actually need the PLTE chunk (ie for a paletted image), we do + * whatever the normal CRC configuration tells us. However, if we + * have an RGB image, the PLTE can be considered ancillary, so + * we will act as though it is. + */ +#ifndef PNG_READ_OPT_PLTE_SUPPORTED + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) +#endif + { + png_crc_finish(png_ptr, 0); + } + +#ifndef PNG_READ_OPT_PLTE_SUPPORTED + else if (png_crc_error(png_ptr)) /* Only if we have a CRC error */ + { + /* If we don't want to use the data from an ancillary chunk, + * we have two options: an error abort, or a warning and we + * ignore the data in this chunk (which should be OK, since + * it's considered ancillary for a RGB or RGBA image). + * + * IMPLEMENTATION NOTE: this is only here because png_crc_finish uses the + * chunk type to determine whether to check the ancillary or the critical + * flags. + */ + if (!(png_ptr->flags & PNG_FLAG_CRC_ANCILLARY_USE)) + { + if (png_ptr->flags & PNG_FLAG_CRC_ANCILLARY_NOWARN) + { + png_chunk_benign_error(png_ptr, "CRC error"); + } + + else + { + png_chunk_warning(png_ptr, "CRC error"); + return; + } + } + + /* Otherwise, we (optionally) emit a warning and use the chunk. */ + else if (!(png_ptr->flags & PNG_FLAG_CRC_ANCILLARY_NOWARN)) + { + png_chunk_warning(png_ptr, "CRC error"); + } + } +#endif + + /* TODO: png_set_PLTE has the side effect of setting png_ptr->palette to its + * own copy of the palette. This has the side effect that when png_start_row + * is called (this happens after any call to png_read_update_info) the + * info_ptr palette gets changed. This is extremely unexpected and + * confusing. + * + * Fix this by not sharing the palette in this way. + */ + png_set_PLTE(png_ptr, info_ptr, palette, num); + + /* The three chunks, bKGD, hIST and tRNS *must* appear after PLTE and before + * IDAT. Prior to 1.6.0 this was not checked; instead the code merely + * checked the apparent validity of a tRNS chunk inserted before PLTE on a + * palette PNG. 1.6.0 attempts to rigorously follow the standard and + * therefore does a benign error if the erroneous condition is detected *and* + * cancels the tRNS if the benign error returns. The alternative is to + * amend the standard since it would be rather hypocritical of the standards + * maintainers to ignore it. + */ +#ifdef PNG_READ_tRNS_SUPPORTED + if (png_ptr->num_trans > 0 || + (info_ptr != NULL && (info_ptr->valid & PNG_INFO_tRNS) != 0)) + { + /* Cancel this because otherwise it would be used if the transforms + * require it. Don't cancel the 'valid' flag because this would prevent + * detection of duplicate chunks. + */ + png_ptr->num_trans = 0; + + if (info_ptr != NULL) + info_ptr->num_trans = 0; + + png_chunk_benign_error(png_ptr, "tRNS must be after"); + } +#endif + +#ifdef PNG_READ_hIST_SUPPORTED + if (info_ptr != NULL && (info_ptr->valid & PNG_INFO_hIST) != 0) + png_chunk_benign_error(png_ptr, "hIST must be after"); +#endif + +#ifdef PNG_READ_bKGD_SUPPORTED + if (info_ptr != NULL && (info_ptr->valid & PNG_INFO_bKGD) != 0) + png_chunk_benign_error(png_ptr, "bKGD must be after"); +#endif +} + +void /* PRIVATE */ +png_handle_IEND(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_debug(1, "in png_handle_IEND"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR) || !(png_ptr->mode & PNG_HAVE_IDAT)) + png_chunk_error(png_ptr, "out of place"); + + png_ptr->mode |= (PNG_AFTER_IDAT | PNG_HAVE_IEND); + + png_crc_finish(png_ptr, length); + + if (length != 0) + png_chunk_benign_error(png_ptr, "invalid"); + + PNG_UNUSED(info_ptr) +} + +#ifdef PNG_READ_gAMA_SUPPORTED +void /* PRIVATE */ +png_handle_gAMA(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_fixed_point igamma; + png_byte buf[4]; + + png_debug(1, "in png_handle_gAMA"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (png_ptr->mode & (PNG_HAVE_IDAT|PNG_HAVE_PLTE)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + if (length != 4) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_crc_read(png_ptr, buf, 4); + + if (png_crc_finish(png_ptr, 0)) + return; + + igamma = png_get_fixed_point(NULL, buf); + + png_colorspace_set_gamma(png_ptr, &png_ptr->colorspace, igamma); + png_colorspace_sync(png_ptr, info_ptr); +} +#endif + +#ifdef PNG_READ_sBIT_SUPPORTED +void /* PRIVATE */ +png_handle_sBIT(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + unsigned int truelen; + png_byte buf[4]; + + png_debug(1, "in png_handle_sBIT"); + + buf[0] = buf[1] = buf[2] = buf[3] = 0; + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (png_ptr->mode & (PNG_HAVE_IDAT|PNG_HAVE_PLTE)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + if (info_ptr != NULL && (info_ptr->valid & PNG_INFO_sBIT)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "duplicate"); + return; + } + + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + truelen = 3; + + else + truelen = png_ptr->channels; + + if (length != truelen || length > 4) + { + png_chunk_benign_error(png_ptr, "invalid"); + png_crc_finish(png_ptr, length); + return; + } + + png_crc_read(png_ptr, buf, truelen); + + if (png_crc_finish(png_ptr, 0)) + return; + + if (png_ptr->color_type & PNG_COLOR_MASK_COLOR) + { + png_ptr->sig_bit.red = buf[0]; + png_ptr->sig_bit.green = buf[1]; + png_ptr->sig_bit.blue = buf[2]; + png_ptr->sig_bit.alpha = buf[3]; + } + + else + { + png_ptr->sig_bit.gray = buf[0]; + png_ptr->sig_bit.red = buf[0]; + png_ptr->sig_bit.green = buf[0]; + png_ptr->sig_bit.blue = buf[0]; + png_ptr->sig_bit.alpha = buf[1]; + } + + png_set_sBIT(png_ptr, info_ptr, &(png_ptr->sig_bit)); +} +#endif + +#ifdef PNG_READ_cHRM_SUPPORTED +void /* PRIVATE */ +png_handle_cHRM(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_byte buf[32]; + png_xy xy; + + png_debug(1, "in png_handle_cHRM"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (png_ptr->mode & (PNG_HAVE_IDAT|PNG_HAVE_PLTE)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + if (length != 32) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_crc_read(png_ptr, buf, 32); + + if (png_crc_finish(png_ptr, 0)) + return; + + xy.whitex = png_get_fixed_point(NULL, buf); + xy.whitey = png_get_fixed_point(NULL, buf + 4); + xy.redx = png_get_fixed_point(NULL, buf + 8); + xy.redy = png_get_fixed_point(NULL, buf + 12); + xy.greenx = png_get_fixed_point(NULL, buf + 16); + xy.greeny = png_get_fixed_point(NULL, buf + 20); + xy.bluex = png_get_fixed_point(NULL, buf + 24); + xy.bluey = png_get_fixed_point(NULL, buf + 28); + + if (xy.whitex == PNG_FIXED_ERROR || + xy.whitey == PNG_FIXED_ERROR || + xy.redx == PNG_FIXED_ERROR || + xy.redy == PNG_FIXED_ERROR || + xy.greenx == PNG_FIXED_ERROR || + xy.greeny == PNG_FIXED_ERROR || + xy.bluex == PNG_FIXED_ERROR || + xy.bluey == PNG_FIXED_ERROR) + { + png_chunk_benign_error(png_ptr, "invalid values"); + return; + } + + /* If a colorspace error has already been output skip this chunk */ + if (png_ptr->colorspace.flags & PNG_COLORSPACE_INVALID) + return; + + if (png_ptr->colorspace.flags & PNG_COLORSPACE_FROM_cHRM) + { + png_ptr->colorspace.flags |= PNG_COLORSPACE_INVALID; + png_colorspace_sync(png_ptr, info_ptr); + png_chunk_benign_error(png_ptr, "duplicate"); + return; + } + + png_ptr->colorspace.flags |= PNG_COLORSPACE_FROM_cHRM; + (void)png_colorspace_set_chromaticities(png_ptr, &png_ptr->colorspace, &xy, + 1/*prefer cHRM values*/); + png_colorspace_sync(png_ptr, info_ptr); +} +#endif + +#ifdef PNG_READ_sRGB_SUPPORTED +void /* PRIVATE */ +png_handle_sRGB(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_byte intent; + + png_debug(1, "in png_handle_sRGB"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (png_ptr->mode & (PNG_HAVE_IDAT|PNG_HAVE_PLTE)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + if (length != 1) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_crc_read(png_ptr, &intent, 1); + + if (png_crc_finish(png_ptr, 0)) + return; + + /* If a colorspace error has already been output skip this chunk */ + if (png_ptr->colorspace.flags & PNG_COLORSPACE_INVALID) + return; + + /* Only one sRGB or iCCP chunk is allowed, use the HAVE_INTENT flag to detect + * this. + */ + if (png_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_INTENT) + { + png_ptr->colorspace.flags |= PNG_COLORSPACE_INVALID; + png_colorspace_sync(png_ptr, info_ptr); + png_chunk_benign_error(png_ptr, "too many profiles"); + return; + } + + (void)png_colorspace_set_sRGB(png_ptr, &png_ptr->colorspace, intent); + png_colorspace_sync(png_ptr, info_ptr); +} +#endif /* PNG_READ_sRGB_SUPPORTED */ + +#ifdef PNG_READ_iCCP_SUPPORTED +void /* PRIVATE */ +png_handle_iCCP(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +/* Note: this does not properly handle profiles that are > 64K under DOS */ +{ + png_const_charp errmsg = NULL; /* error message output, or no error */ + int finished = 0; /* crc checked */ + + png_debug(1, "in png_handle_iCCP"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (png_ptr->mode & (PNG_HAVE_IDAT|PNG_HAVE_PLTE)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + /* Consistent with all the above colorspace handling an obviously *invalid* + * chunk is just ignored, so does not invalidate the color space. An + * alternative is to set the 'invalid' flags at the start of this routine + * and only clear them in they were not set before and all the tests pass. + * The minimum 'deflate' stream is assumed to be just the 2 byte header and 4 + * byte checksum. The keyword must be one character and there is a + * terminator (0) byte and the compression method. + */ + if (length < 9) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "too short"); + return; + } + + /* If a colorspace error has already been output skip this chunk */ + if (png_ptr->colorspace.flags & PNG_COLORSPACE_INVALID) + { + png_crc_finish(png_ptr, length); + return; + } + + /* Only one sRGB or iCCP chunk is allowed, use the HAVE_INTENT flag to detect + * this. + */ + if ((png_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_INTENT) == 0) + { + uInt read_length, keyword_length; + char keyword[81]; + + /* Find the keyword; the keyword plus separator and compression method + * bytes can be at most 81 characters long. + */ + read_length = 81; /* maximum */ + if (read_length > length) + read_length = (uInt)length; + + png_crc_read(png_ptr, (png_bytep)keyword, read_length); + length -= read_length; + + keyword_length = 0; + while (keyword_length < 80 && keyword_length < read_length && + keyword[keyword_length] != 0) + ++keyword_length; + + /* TODO: make the keyword checking common */ + if (keyword_length >= 1 && keyword_length <= 79) + { + /* We only understand '0' compression - deflate - so if we get a + * different value we can't safely decode the chunk. + */ + if (keyword_length+1 < read_length && + keyword[keyword_length+1] == PNG_COMPRESSION_TYPE_BASE) + { + read_length -= keyword_length+2; + + if (png_inflate_claim(png_ptr, png_iCCP, + png_ptr->flags & PNG_FLAG_BENIGN_ERRORS_WARN ? 15 : 0) == Z_OK) + { + Byte profile_header[132]; + Byte local_buffer[PNG_INFLATE_BUF_SIZE]; + png_alloc_size_t size = (sizeof profile_header); + + png_ptr->zstream.next_in = (Bytef*)keyword + (keyword_length+2); + png_ptr->zstream.avail_in = read_length; + (void)png_inflate_read(png_ptr, local_buffer, + (sizeof local_buffer), &length, profile_header, &size, + 0/*finish: don't, because the output is too small*/); + + if (size == 0) + { + /* We have the ICC profile header; do the basic header checks. + */ + const png_uint_32 profile_length = + png_get_uint_32(profile_header); + + if (png_icc_check_length(png_ptr, &png_ptr->colorspace, + keyword, profile_length)) + { + /* The length is apparently ok, so we can check the 132 + * byte header. + */ + if (png_icc_check_header(png_ptr, &png_ptr->colorspace, + keyword, profile_length, profile_header, + png_ptr->color_type)) + { + /* Now read the tag table; a variable size buffer is + * needed at this point, allocate one for the whole + * profile. The header check has already validated + * that none of these stuff will overflow. + */ + const png_uint_32 tag_count = png_get_uint_32( + profile_header+128); + png_bytep profile = png_read_buffer(png_ptr, + profile_length, 2/*silent*/); + + if (profile != NULL) + { + memcpy(profile, profile_header, + (sizeof profile_header)); + + size = 12 * tag_count; + + (void)png_inflate_read(png_ptr, local_buffer, + (sizeof local_buffer), &length, + profile + (sizeof profile_header), &size, 0); + + /* Still expect a a buffer error because we expect + * there to be some tag data! + */ + if (size == 0) + { + if (png_icc_check_tag_table(png_ptr, + &png_ptr->colorspace, keyword, profile_length, + profile)) + { + /* The profile has been validated for basic + * security issues, so read the whole thing in. + */ + size = profile_length - (sizeof profile_header) + - 12 * tag_count; + + (void)png_inflate_read(png_ptr, local_buffer, + (sizeof local_buffer), &length, + profile + (sizeof profile_header) + + 12 * tag_count, &size, 1/*finish*/); + + if (length > 0 && !(png_ptr->flags & + PNG_FLAG_BENIGN_ERRORS_WARN)) + errmsg = "extra compressed data"; + + /* But otherwise allow extra data: */ + else if (size == 0) + { + if (length > 0) + { + /* This can be handled completely, so + * keep going. + */ + png_chunk_warning(png_ptr, + "extra compressed data"); + } + + png_crc_finish(png_ptr, length); + finished = 1; + +# ifdef PNG_sRGB_SUPPORTED + /* Check for a match against sRGB */ + png_icc_set_sRGB(png_ptr, + &png_ptr->colorspace, profile, + png_ptr->zstream.adler); +# endif + + /* Steal the profile for info_ptr. */ + if (info_ptr != NULL) + { + png_free_data(png_ptr, info_ptr, + PNG_FREE_ICCP, 0); + + info_ptr->iccp_name = png_voidcast(char*, + png_malloc_base(png_ptr, + keyword_length+1)); + if (info_ptr->iccp_name != NULL) + { + memcpy(info_ptr->iccp_name, keyword, + keyword_length+1); + info_ptr->iccp_proflen = + profile_length; + info_ptr->iccp_profile = profile; + png_ptr->read_buffer = NULL; /*steal*/ + info_ptr->free_me |= PNG_FREE_ICCP; + info_ptr->valid |= PNG_INFO_iCCP; + } + + else + { + png_ptr->colorspace.flags |= + PNG_COLORSPACE_INVALID; + errmsg = "out of memory"; + } + } + + /* else the profile remains in the read + * buffer which gets reused for subsequent + * chunks. + */ + + if (info_ptr != NULL) + png_colorspace_sync(png_ptr, info_ptr); + + if (errmsg == NULL) + { + png_ptr->zowner = 0; + return; + } + } + + else if (size > 0) + errmsg = "truncated"; + + else + errmsg = png_ptr->zstream.msg; + } + + /* else png_icc_check_tag_table output an error */ + } + + else /* profile truncated */ + errmsg = png_ptr->zstream.msg; + } + + else + errmsg = "out of memory"; + } + + /* else png_icc_check_header output an error */ + } + + /* else png_icc_check_length output an error */ + } + + else /* profile truncated */ + errmsg = png_ptr->zstream.msg; + + /* Release the stream */ + png_ptr->zowner = 0; + } + + else /* png_inflate_claim failed */ + errmsg = png_ptr->zstream.msg; + } + + else + errmsg = "bad compression method"; /* or missing */ + } + + else + errmsg = "bad keyword"; + } + + else + errmsg = "too many profiles"; + + /* Failure: the reason is in 'errmsg' */ + if (!finished) + png_crc_finish(png_ptr, length); + + png_ptr->colorspace.flags |= PNG_COLORSPACE_INVALID; + png_colorspace_sync(png_ptr, info_ptr); + if (errmsg != NULL) /* else already output */ + png_chunk_benign_error(png_ptr, errmsg); +} +#endif /* PNG_READ_iCCP_SUPPORTED */ + +#ifdef PNG_READ_sPLT_SUPPORTED +void /* PRIVATE */ +png_handle_sPLT(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +/* Note: this does not properly handle chunks that are > 64K under DOS */ +{ + png_bytep entry_start, buffer; + png_sPLT_t new_palette; + png_sPLT_entryp pp; + png_uint_32 data_length; + int entry_size, i; + png_uint_32 skip = 0; + png_uint_32 dl; + png_size_t max_dl; + + png_debug(1, "in png_handle_sPLT"); + +#ifdef PNG_USER_LIMITS_SUPPORTED + if (png_ptr->user_chunk_cache_max != 0) + { + if (png_ptr->user_chunk_cache_max == 1) + { + png_crc_finish(png_ptr, length); + return; + } + + if (--png_ptr->user_chunk_cache_max == 1) + { + png_warning(png_ptr, "No space in chunk cache for sPLT"); + png_crc_finish(png_ptr, length); + return; + } + } +#endif + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (png_ptr->mode & PNG_HAVE_IDAT) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + +#ifdef PNG_MAX_MALLOC_64K + if (length > 65535U) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "too large to fit in memory"); + return; + } +#endif + + buffer = png_read_buffer(png_ptr, length+1, 2/*silent*/); + if (buffer == NULL) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of memory"); + return; + } + + + /* WARNING: this may break if size_t is less than 32 bits; it is assumed + * that the PNG_MAX_MALLOC_64K test is enabled in this case, but this is a + * potential breakage point if the types in pngconf.h aren't exactly right. + */ + png_crc_read(png_ptr, buffer, length); + + if (png_crc_finish(png_ptr, skip)) + return; + + buffer[length] = 0; + + for (entry_start = buffer; *entry_start; entry_start++) + /* Empty loop to find end of name */ ; + + ++entry_start; + + /* A sample depth should follow the separator, and we should be on it */ + if (entry_start > buffer + length - 2) + { + png_warning(png_ptr, "malformed sPLT chunk"); + return; + } + + new_palette.depth = *entry_start++; + entry_size = (new_palette.depth == 8 ? 6 : 10); + /* This must fit in a png_uint_32 because it is derived from the original + * chunk data length. + */ + data_length = length - (png_uint_32)(entry_start - buffer); + + /* Integrity-check the data length */ + if (data_length % entry_size) + { + png_warning(png_ptr, "sPLT chunk has bad length"); + return; + } + + dl = (png_int_32)(data_length / entry_size); + max_dl = PNG_SIZE_MAX / (sizeof (png_sPLT_entry)); + + if (dl > max_dl) + { + png_warning(png_ptr, "sPLT chunk too long"); + return; + } + + new_palette.nentries = (png_int_32)(data_length / entry_size); + + new_palette.entries = (png_sPLT_entryp)png_malloc_warn( + png_ptr, new_palette.nentries * (sizeof (png_sPLT_entry))); + + if (new_palette.entries == NULL) + { + png_warning(png_ptr, "sPLT chunk requires too much memory"); + return; + } + +#ifdef PNG_POINTER_INDEXING_SUPPORTED + for (i = 0; i < new_palette.nentries; i++) + { + pp = new_palette.entries + i; + + if (new_palette.depth == 8) + { + pp->red = *entry_start++; + pp->green = *entry_start++; + pp->blue = *entry_start++; + pp->alpha = *entry_start++; + } + + else + { + pp->red = png_get_uint_16(entry_start); entry_start += 2; + pp->green = png_get_uint_16(entry_start); entry_start += 2; + pp->blue = png_get_uint_16(entry_start); entry_start += 2; + pp->alpha = png_get_uint_16(entry_start); entry_start += 2; + } + + pp->frequency = png_get_uint_16(entry_start); entry_start += 2; + } +#else + pp = new_palette.entries; + + for (i = 0; i < new_palette.nentries; i++) + { + + if (new_palette.depth == 8) + { + pp[i].red = *entry_start++; + pp[i].green = *entry_start++; + pp[i].blue = *entry_start++; + pp[i].alpha = *entry_start++; + } + + else + { + pp[i].red = png_get_uint_16(entry_start); entry_start += 2; + pp[i].green = png_get_uint_16(entry_start); entry_start += 2; + pp[i].blue = png_get_uint_16(entry_start); entry_start += 2; + pp[i].alpha = png_get_uint_16(entry_start); entry_start += 2; + } + + pp[i].frequency = png_get_uint_16(entry_start); entry_start += 2; + } +#endif + + /* Discard all chunk data except the name and stash that */ + new_palette.name = (png_charp)buffer; + + png_set_sPLT(png_ptr, info_ptr, &new_palette, 1); + + png_free(png_ptr, new_palette.entries); +} +#endif /* PNG_READ_sPLT_SUPPORTED */ + +#ifdef PNG_READ_tRNS_SUPPORTED +void /* PRIVATE */ +png_handle_tRNS(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_byte readbuf[PNG_MAX_PALETTE_LENGTH]; + + png_debug(1, "in png_handle_tRNS"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (png_ptr->mode & PNG_HAVE_IDAT) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + else if (info_ptr != NULL && (info_ptr->valid & PNG_INFO_tRNS)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "duplicate"); + return; + } + + if (png_ptr->color_type == PNG_COLOR_TYPE_GRAY) + { + png_byte buf[2]; + + if (length != 2) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_crc_read(png_ptr, buf, 2); + png_ptr->num_trans = 1; + png_ptr->trans_color.gray = png_get_uint_16(buf); + } + + else if (png_ptr->color_type == PNG_COLOR_TYPE_RGB) + { + png_byte buf[6]; + + if (length != 6) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_crc_read(png_ptr, buf, length); + png_ptr->num_trans = 1; + png_ptr->trans_color.red = png_get_uint_16(buf); + png_ptr->trans_color.green = png_get_uint_16(buf + 2); + png_ptr->trans_color.blue = png_get_uint_16(buf + 4); + } + + else if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + { + if (!(png_ptr->mode & PNG_HAVE_PLTE)) + { + /* TODO: is this actually an error in the ISO spec? */ + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + if (length > png_ptr->num_palette || length > PNG_MAX_PALETTE_LENGTH || + length == 0) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_crc_read(png_ptr, readbuf, length); + png_ptr->num_trans = (png_uint_16)length; + } + + else + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid with alpha channel"); + return; + } + + if (png_crc_finish(png_ptr, 0)) + { + png_ptr->num_trans = 0; + return; + } + + /* TODO: this is a horrible side effect in the palette case because the + * png_struct ends up with a pointer to the tRNS buffer owned by the + * png_info. Fix this. + */ + png_set_tRNS(png_ptr, info_ptr, readbuf, png_ptr->num_trans, + &(png_ptr->trans_color)); +} +#endif + +#ifdef PNG_READ_bKGD_SUPPORTED +void /* PRIVATE */ +png_handle_bKGD(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + unsigned int truelen; + png_byte buf[6]; + png_color_16 background; + + png_debug(1, "in png_handle_bKGD"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if ((png_ptr->mode & PNG_HAVE_IDAT) || + (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE && + !(png_ptr->mode & PNG_HAVE_PLTE))) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + else if (info_ptr != NULL && (info_ptr->valid & PNG_INFO_bKGD)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "duplicate"); + return; + } + + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + truelen = 1; + + else if (png_ptr->color_type & PNG_COLOR_MASK_COLOR) + truelen = 6; + + else + truelen = 2; + + if (length != truelen) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_crc_read(png_ptr, buf, truelen); + + if (png_crc_finish(png_ptr, 0)) + return; + + /* We convert the index value into RGB components so that we can allow + * arbitrary RGB values for background when we have transparency, and + * so it is easy to determine the RGB values of the background color + * from the info_ptr struct. + */ + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + { + background.index = buf[0]; + + if (info_ptr && info_ptr->num_palette) + { + if (buf[0] >= info_ptr->num_palette) + { + png_chunk_benign_error(png_ptr, "invalid index"); + return; + } + + background.red = (png_uint_16)png_ptr->palette[buf[0]].red; + background.green = (png_uint_16)png_ptr->palette[buf[0]].green; + background.blue = (png_uint_16)png_ptr->palette[buf[0]].blue; + } + + else + background.red = background.green = background.blue = 0; + + background.gray = 0; + } + + else if (!(png_ptr->color_type & PNG_COLOR_MASK_COLOR)) /* GRAY */ + { + background.index = 0; + background.red = + background.green = + background.blue = + background.gray = png_get_uint_16(buf); + } + + else + { + background.index = 0; + background.red = png_get_uint_16(buf); + background.green = png_get_uint_16(buf + 2); + background.blue = png_get_uint_16(buf + 4); + background.gray = 0; + } + + png_set_bKGD(png_ptr, info_ptr, &background); +} +#endif + +#ifdef PNG_READ_hIST_SUPPORTED +void /* PRIVATE */ +png_handle_hIST(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + unsigned int num, i; + png_uint_16 readbuf[PNG_MAX_PALETTE_LENGTH]; + + png_debug(1, "in png_handle_hIST"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if ((png_ptr->mode & PNG_HAVE_IDAT) || !(png_ptr->mode & PNG_HAVE_PLTE)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + else if (info_ptr != NULL && (info_ptr->valid & PNG_INFO_hIST)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "duplicate"); + return; + } + + num = length / 2 ; + + if (num != png_ptr->num_palette || num > PNG_MAX_PALETTE_LENGTH) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + for (i = 0; i < num; i++) + { + png_byte buf[2]; + + png_crc_read(png_ptr, buf, 2); + readbuf[i] = png_get_uint_16(buf); + } + + if (png_crc_finish(png_ptr, 0)) + return; + + png_set_hIST(png_ptr, info_ptr, readbuf); +} +#endif + +#ifdef PNG_READ_pHYs_SUPPORTED +void /* PRIVATE */ +png_handle_pHYs(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_byte buf[9]; + png_uint_32 res_x, res_y; + int unit_type; + + png_debug(1, "in png_handle_pHYs"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (png_ptr->mode & PNG_HAVE_IDAT) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + else if (info_ptr != NULL && (info_ptr->valid & PNG_INFO_pHYs)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "duplicate"); + return; + } + + if (length != 9) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_crc_read(png_ptr, buf, 9); + + if (png_crc_finish(png_ptr, 0)) + return; + + res_x = png_get_uint_32(buf); + res_y = png_get_uint_32(buf + 4); + unit_type = buf[8]; + png_set_pHYs(png_ptr, info_ptr, res_x, res_y, unit_type); +} +#endif + +#ifdef PNG_READ_oFFs_SUPPORTED +void /* PRIVATE */ +png_handle_oFFs(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_byte buf[9]; + png_int_32 offset_x, offset_y; + int unit_type; + + png_debug(1, "in png_handle_oFFs"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (png_ptr->mode & PNG_HAVE_IDAT) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + else if (info_ptr != NULL && (info_ptr->valid & PNG_INFO_oFFs)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "duplicate"); + return; + } + + if (length != 9) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_crc_read(png_ptr, buf, 9); + + if (png_crc_finish(png_ptr, 0)) + return; + + offset_x = png_get_int_32(buf); + offset_y = png_get_int_32(buf + 4); + unit_type = buf[8]; + png_set_oFFs(png_ptr, info_ptr, offset_x, offset_y, unit_type); +} +#endif + +#ifdef PNG_READ_pCAL_SUPPORTED +/* Read the pCAL chunk (described in the PNG Extensions document) */ +void /* PRIVATE */ +png_handle_pCAL(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_int_32 X0, X1; + png_byte type, nparams; + png_bytep buffer, buf, units, endptr; + png_charpp params; + int i; + + png_debug(1, "in png_handle_pCAL"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (png_ptr->mode & PNG_HAVE_IDAT) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + else if (info_ptr != NULL && (info_ptr->valid & PNG_INFO_pCAL)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "duplicate"); + return; + } + + png_debug1(2, "Allocating and reading pCAL chunk data (%u bytes)", + length + 1); + + buffer = png_read_buffer(png_ptr, length+1, 2/*silent*/); + + if (buffer == NULL) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of memory"); + return; + } + + png_crc_read(png_ptr, buffer, length); + + if (png_crc_finish(png_ptr, 0)) + return; + + buffer[length] = 0; /* Null terminate the last string */ + + png_debug(3, "Finding end of pCAL purpose string"); + for (buf = buffer; *buf; buf++) + /* Empty loop */ ; + + endptr = buffer + length; + + /* We need to have at least 12 bytes after the purpose string + * in order to get the parameter information. + */ + if (endptr <= buf + 12) + { + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_debug(3, "Reading pCAL X0, X1, type, nparams, and units"); + X0 = png_get_int_32((png_bytep)buf+1); + X1 = png_get_int_32((png_bytep)buf+5); + type = buf[9]; + nparams = buf[10]; + units = buf + 11; + + png_debug(3, "Checking pCAL equation type and number of parameters"); + /* Check that we have the right number of parameters for known + * equation types. + */ + if ((type == PNG_EQUATION_LINEAR && nparams != 2) || + (type == PNG_EQUATION_BASE_E && nparams != 3) || + (type == PNG_EQUATION_ARBITRARY && nparams != 3) || + (type == PNG_EQUATION_HYPERBOLIC && nparams != 4)) + { + png_chunk_benign_error(png_ptr, "invalid parameter count"); + return; + } + + else if (type >= PNG_EQUATION_LAST) + { + png_chunk_benign_error(png_ptr, "unrecognized equation type"); + } + + for (buf = units; *buf; buf++) + /* Empty loop to move past the units string. */ ; + + png_debug(3, "Allocating pCAL parameters array"); + + params = png_voidcast(png_charpp, png_malloc_warn(png_ptr, + nparams * (sizeof (png_charp)))); + + if (params == NULL) + { + png_chunk_benign_error(png_ptr, "out of memory"); + return; + } + + /* Get pointers to the start of each parameter string. */ + for (i = 0; i < nparams; i++) + { + buf++; /* Skip the null string terminator from previous parameter. */ + + png_debug1(3, "Reading pCAL parameter %d", i); + + for (params[i] = (png_charp)buf; buf <= endptr && *buf != 0; buf++) + /* Empty loop to move past each parameter string */ ; + + /* Make sure we haven't run out of data yet */ + if (buf > endptr) + { + png_free(png_ptr, params); + png_chunk_benign_error(png_ptr, "invalid data"); + return; + } + } + + png_set_pCAL(png_ptr, info_ptr, (png_charp)buffer, X0, X1, type, nparams, + (png_charp)units, params); + + png_free(png_ptr, params); +} +#endif + +#ifdef PNG_READ_sCAL_SUPPORTED +/* Read the sCAL chunk */ +void /* PRIVATE */ +png_handle_sCAL(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_bytep buffer; + png_size_t i; + int state; + + png_debug(1, "in png_handle_sCAL"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (png_ptr->mode & PNG_HAVE_IDAT) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of place"); + return; + } + + else if (info_ptr != NULL && (info_ptr->valid & PNG_INFO_sCAL)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "duplicate"); + return; + } + + /* Need unit type, width, \0, height: minimum 4 bytes */ + else if (length < 4) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_debug1(2, "Allocating and reading sCAL chunk data (%u bytes)", + length + 1); + + buffer = png_read_buffer(png_ptr, length+1, 2/*silent*/); + + if (buffer == NULL) + { + png_chunk_benign_error(png_ptr, "out of memory"); + png_crc_finish(png_ptr, length); + return; + } + + png_crc_read(png_ptr, buffer, length); + buffer[length] = 0; /* Null terminate the last string */ + + if (png_crc_finish(png_ptr, 0)) + return; + + /* Validate the unit. */ + if (buffer[0] != 1 && buffer[0] != 2) + { + png_chunk_benign_error(png_ptr, "invalid unit"); + return; + } + + /* Validate the ASCII numbers, need two ASCII numbers separated by + * a '\0' and they need to fit exactly in the chunk data. + */ + i = 1; + state = 0; + + if (!png_check_fp_number((png_const_charp)buffer, length, &state, &i) || + i >= length || buffer[i++] != 0) + png_chunk_benign_error(png_ptr, "bad width format"); + + else if (!PNG_FP_IS_POSITIVE(state)) + png_chunk_benign_error(png_ptr, "non-positive width"); + + else + { + png_size_t heighti = i; + + state = 0; + if (!png_check_fp_number((png_const_charp)buffer, length, &state, &i) || + i != length) + png_chunk_benign_error(png_ptr, "bad height format"); + + else if (!PNG_FP_IS_POSITIVE(state)) + png_chunk_benign_error(png_ptr, "non-positive height"); + + else + /* This is the (only) success case. */ + png_set_sCAL_s(png_ptr, info_ptr, buffer[0], + (png_charp)buffer+1, (png_charp)buffer+heighti); + } +} +#endif + +#ifdef PNG_READ_tIME_SUPPORTED +void /* PRIVATE */ +png_handle_tIME(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_byte buf[7]; + png_time mod_time; + + png_debug(1, "in png_handle_tIME"); + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + else if (info_ptr != NULL && (info_ptr->valid & PNG_INFO_tIME)) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "duplicate"); + return; + } + + if (png_ptr->mode & PNG_HAVE_IDAT) + png_ptr->mode |= PNG_AFTER_IDAT; + + if (length != 7) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "invalid"); + return; + } + + png_crc_read(png_ptr, buf, 7); + + if (png_crc_finish(png_ptr, 0)) + return; + + mod_time.second = buf[6]; + mod_time.minute = buf[5]; + mod_time.hour = buf[4]; + mod_time.day = buf[3]; + mod_time.month = buf[2]; + mod_time.year = png_get_uint_16(buf); + + png_set_tIME(png_ptr, info_ptr, &mod_time); +} +#endif + +#ifdef PNG_READ_tEXt_SUPPORTED +/* Note: this does not properly handle chunks that are > 64K under DOS */ +void /* PRIVATE */ +png_handle_tEXt(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_text text_info; + png_bytep buffer; + png_charp key; + png_charp text; + png_uint_32 skip = 0; + + png_debug(1, "in png_handle_tEXt"); + +#ifdef PNG_USER_LIMITS_SUPPORTED + if (png_ptr->user_chunk_cache_max != 0) + { + if (png_ptr->user_chunk_cache_max == 1) + { + png_crc_finish(png_ptr, length); + return; + } + + if (--png_ptr->user_chunk_cache_max == 1) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "no space in chunk cache"); + return; + } + } +#endif + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + if (png_ptr->mode & PNG_HAVE_IDAT) + png_ptr->mode |= PNG_AFTER_IDAT; + +#ifdef PNG_MAX_MALLOC_64K + if (length > 65535U) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "too large to fit in memory"); + return; + } +#endif + + buffer = png_read_buffer(png_ptr, length+1, 1/*warn*/); + + if (buffer == NULL) + { + png_chunk_benign_error(png_ptr, "out of memory"); + return; + } + + png_crc_read(png_ptr, buffer, length); + + if (png_crc_finish(png_ptr, skip)) + return; + + key = (png_charp)buffer; + key[length] = 0; + + for (text = key; *text; text++) + /* Empty loop to find end of key */ ; + + if (text != key + length) + text++; + + text_info.compression = PNG_TEXT_COMPRESSION_NONE; + text_info.key = key; + text_info.lang = NULL; + text_info.lang_key = NULL; + text_info.itxt_length = 0; + text_info.text = text; + text_info.text_length = strlen(text); + + if (png_set_text_2(png_ptr, info_ptr, &text_info, 1)) + png_warning(png_ptr, "Insufficient memory to process text chunk"); +} +#endif + +#ifdef PNG_READ_zTXt_SUPPORTED +/* Note: this does not correctly handle chunks that are > 64K under DOS */ +void /* PRIVATE */ +png_handle_zTXt(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_const_charp errmsg = NULL; + png_bytep buffer; + png_uint_32 keyword_length; + + png_debug(1, "in png_handle_zTXt"); + +#ifdef PNG_USER_LIMITS_SUPPORTED + if (png_ptr->user_chunk_cache_max != 0) + { + if (png_ptr->user_chunk_cache_max == 1) + { + png_crc_finish(png_ptr, length); + return; + } + + if (--png_ptr->user_chunk_cache_max == 1) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "no space in chunk cache"); + return; + } + } +#endif + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + if (png_ptr->mode & PNG_HAVE_IDAT) + png_ptr->mode |= PNG_AFTER_IDAT; + + buffer = png_read_buffer(png_ptr, length, 2/*silent*/); + + if (buffer == NULL) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of memory"); + return; + } + + png_crc_read(png_ptr, buffer, length); + + if (png_crc_finish(png_ptr, 0)) + return; + + /* TODO: also check that the keyword contents match the spec! */ + for (keyword_length = 0; + keyword_length < length && buffer[keyword_length] != 0; + ++keyword_length) + /* Empty loop to find end of name */ ; + + if (keyword_length > 79 || keyword_length < 1) + errmsg = "bad keyword"; + + /* zTXt must have some LZ data after the keyword, although it may expand to + * zero bytes; we need a '\0' at the end of the keyword, the compression type + * then the LZ data: + */ + else if (keyword_length + 3 > length) + errmsg = "truncated"; + + else if (buffer[keyword_length+1] != PNG_COMPRESSION_TYPE_BASE) + errmsg = "unknown compression type"; + + else + { + png_alloc_size_t uncompressed_length = PNG_SIZE_MAX; + + /* TODO: at present png_decompress_chunk imposes a single application + * level memory limit, this should be split to different values for iCCP + * and text chunks. + */ + if (png_decompress_chunk(png_ptr, length, keyword_length+2, + &uncompressed_length, 1/*terminate*/) == Z_STREAM_END) + { + png_text text; + + /* It worked; png_ptr->read_buffer now looks like a tEXt chunk except + * for the extra compression type byte and the fact that it isn't + * necessarily '\0' terminated. + */ + buffer = png_ptr->read_buffer; + buffer[uncompressed_length+(keyword_length+2)] = 0; + + text.compression = PNG_TEXT_COMPRESSION_zTXt; + text.key = (png_charp)buffer; + text.text = (png_charp)(buffer + keyword_length+2); + text.text_length = uncompressed_length; + text.itxt_length = 0; + text.lang = NULL; + text.lang_key = NULL; + + if (png_set_text_2(png_ptr, info_ptr, &text, 1)) + errmsg = "insufficient memory"; + } + + else + errmsg = png_ptr->zstream.msg; + } + + if (errmsg != NULL) + png_chunk_benign_error(png_ptr, errmsg); +} +#endif + +#ifdef PNG_READ_iTXt_SUPPORTED +/* Note: this does not correctly handle chunks that are > 64K under DOS */ +void /* PRIVATE */ +png_handle_iTXt(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length) +{ + png_const_charp errmsg = NULL; + png_bytep buffer; + png_uint_32 prefix_length; + + png_debug(1, "in png_handle_iTXt"); + +#ifdef PNG_USER_LIMITS_SUPPORTED + if (png_ptr->user_chunk_cache_max != 0) + { + if (png_ptr->user_chunk_cache_max == 1) + { + png_crc_finish(png_ptr, length); + return; + } + + if (--png_ptr->user_chunk_cache_max == 1) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "no space in chunk cache"); + return; + } + } +#endif + + if (!(png_ptr->mode & PNG_HAVE_IHDR)) + png_chunk_error(png_ptr, "missing IHDR"); + + if (png_ptr->mode & PNG_HAVE_IDAT) + png_ptr->mode |= PNG_AFTER_IDAT; + + buffer = png_read_buffer(png_ptr, length+1, 1/*warn*/); + + if (buffer == NULL) + { + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "out of memory"); + return; + } + + png_crc_read(png_ptr, buffer, length); + + if (png_crc_finish(png_ptr, 0)) + return; + + /* First the keyword. */ + for (prefix_length=0; + prefix_length < length && buffer[prefix_length] != 0; + ++prefix_length) + /* Empty loop */ ; + + /* Perform a basic check on the keyword length here. */ + if (prefix_length > 79 || prefix_length < 1) + errmsg = "bad keyword"; + + /* Expect keyword, compression flag, compression type, language, translated + * keyword (both may be empty but are 0 terminated) then the text, which may + * be empty. + */ + else if (prefix_length + 5 > length) + errmsg = "truncated"; + + else if (buffer[prefix_length+1] == 0 || + (buffer[prefix_length+1] == 1 && + buffer[prefix_length+2] == PNG_COMPRESSION_TYPE_BASE)) + { + int compressed = buffer[prefix_length+1] != 0; + png_uint_32 language_offset, translated_keyword_offset; + png_alloc_size_t uncompressed_length = 0; + + /* Now the language tag */ + prefix_length += 3; + language_offset = prefix_length; + + for (; prefix_length < length && buffer[prefix_length] != 0; + ++prefix_length) + /* Empty loop */ ; + + /* WARNING: the length may be invalid here, this is checked below. */ + translated_keyword_offset = ++prefix_length; + + for (; prefix_length < length && buffer[prefix_length] != 0; + ++prefix_length) + /* Empty loop */ ; + + /* prefix_length should now be at the trailing '\0' of the translated + * keyword, but it may already be over the end. None of this arithmetic + * can overflow because chunks are at most 2^31 bytes long, but on 16-bit + * systems the available allocaton may overflow. + */ + ++prefix_length; + + if (!compressed && prefix_length <= length) + uncompressed_length = length - prefix_length; + + else if (compressed && prefix_length < length) + { + uncompressed_length = PNG_SIZE_MAX; + + /* TODO: at present png_decompress_chunk imposes a single application + * level memory limit, this should be split to different values for + * iCCP and text chunks. + */ + if (png_decompress_chunk(png_ptr, length, prefix_length, + &uncompressed_length, 1/*terminate*/) == Z_STREAM_END) + buffer = png_ptr->read_buffer; + + else + errmsg = png_ptr->zstream.msg; + } + + else + errmsg = "truncated"; + + if (errmsg == NULL) + { + png_text text; + + buffer[uncompressed_length+prefix_length] = 0; + + if (compressed) + text.compression = PNG_ITXT_COMPRESSION_NONE; + + else + text.compression = PNG_ITXT_COMPRESSION_zTXt; + + text.key = (png_charp)buffer; + text.lang = (png_charp)buffer + language_offset; + text.lang_key = (png_charp)buffer + translated_keyword_offset; + text.text = (png_charp)buffer + prefix_length; + text.text_length = 0; + text.itxt_length = uncompressed_length; + + if (png_set_text_2(png_ptr, info_ptr, &text, 1)) + errmsg = "insufficient memory"; + } + } + + else + errmsg = "bad compression info"; + + if (errmsg != NULL) + png_chunk_benign_error(png_ptr, errmsg); +} +#endif + +#ifdef PNG_READ_UNKNOWN_CHUNKS_SUPPORTED +/* Utility function for png_handle_unknown; set up png_ptr::unknown_chunk */ +static int +png_cache_unknown_chunk(png_structrp png_ptr, png_uint_32 length) +{ + png_alloc_size_t limit = PNG_SIZE_MAX; + + if (png_ptr->unknown_chunk.data != NULL) + { + png_free(png_ptr, png_ptr->unknown_chunk.data); + png_ptr->unknown_chunk.data = NULL; + } + +# ifdef PNG_SET_CHUNK_MALLOC_LIMIT_SUPPORTED + if (png_ptr->user_chunk_malloc_max > 0 && + png_ptr->user_chunk_malloc_max < limit) + limit = png_ptr->user_chunk_malloc_max; + +# elif PNG_USER_CHUNK_MALLOC_MAX > 0 + if (PNG_USER_CHUNK_MALLOC_MAX < limit) + limit = PNG_USER_CHUNK_MALLOC_MAX; +# endif + + if (length <= limit) + { + PNG_CSTRING_FROM_CHUNK(png_ptr->unknown_chunk.name, png_ptr->chunk_name); + /* The following is safe because of the PNG_SIZE_MAX init above */ + png_ptr->unknown_chunk.size = (png_size_t)length/*SAFE*/; + /* 'mode' is a flag array, only the bottom four bits matter here */ + png_ptr->unknown_chunk.location = (png_byte)png_ptr->mode/*SAFE*/; + + if (length == 0) + png_ptr->unknown_chunk.data = NULL; + + else + { + /* Do a 'warn' here - it is handled below. */ + png_ptr->unknown_chunk.data = png_voidcast(png_bytep, + png_malloc_warn(png_ptr, length)); + } + } + + if (png_ptr->unknown_chunk.data == NULL && length > 0) + { + /* This is benign because we clean up correctly */ + png_crc_finish(png_ptr, length); + png_chunk_benign_error(png_ptr, "unknown chunk exceeds memory limits"); + return 0; + } + + else + { + if (length > 0) + png_crc_read(png_ptr, png_ptr->unknown_chunk.data, length); + png_crc_finish(png_ptr, 0); + return 1; + } +} +#endif /* PNG_READ_UNKNOWN_CHUNKS_SUPPORTED */ + +/* Handle an unknown, or known but disabled, chunk */ +void /* PRIVATE */ +png_handle_unknown(png_structrp png_ptr, png_inforp info_ptr, + png_uint_32 length, int keep) +{ + int handled = 0; /* the chunk was handled */ + + png_debug(1, "in png_handle_unknown"); + +#ifdef PNG_READ_UNKNOWN_CHUNKS_SUPPORTED + /* NOTE: this code is based on the code in libpng-1.4.12 except for fixing + * the bug which meant that setting a non-default behavior for a specific + * chunk would be ignored (the default was always used unless a user + * callback was installed). + * + * 'keep' is the value from the png_chunk_unknown_handling, the setting for + * this specific chunk_name, if PNG_HANDLE_AS_UNKNOWN_SUPPORTED, if not it + * will always be PNG_HANDLE_CHUNK_AS_DEFAULT and it needs to be set here. + * This is just an optimization to avoid multiple calls to the lookup + * function. + */ +# ifndef PNG_HANDLE_AS_UNKNOWN_SUPPORTED +# ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED + keep = png_chunk_unknown_handling(png_ptr, png_ptr->chunk_name); +# endif +# endif + + /* One of the following methods will read the chunk or skip it (at least one + * of these is always defined because this is the only way to switch on + * PNG_READ_UNKNOWN_CHUNKS_SUPPORTED) + */ +# ifdef PNG_READ_USER_CHUNKS_SUPPORTED + /* The user callback takes precedence over the chunk keep value, but the + * keep value is still required to validate a save of a critical chunk. + */ + if (png_ptr->read_user_chunk_fn != NULL) + { + if (png_cache_unknown_chunk(png_ptr, length)) + { + /* Callback to user unknown chunk handler */ + int ret = (*(png_ptr->read_user_chunk_fn))(png_ptr, + &png_ptr->unknown_chunk); + + /* ret is: + * negative: An error occured, png_chunk_error will be called. + * zero: The chunk was not handled, the chunk will be discarded + * unless png_set_keep_unknown_chunks has been used to set + * a 'keep' behavior for this particular chunk, in which + * case that will be used. A critical chunk will cause an + * error at this point unless it is to be saved. + * positive: The chunk was handled, libpng will ignore/discard it. + */ + if (ret < 0) + png_chunk_error(png_ptr, "error in user chunk"); + + else if (ret == 0) + { + /* If the keep value is 'default' or 'never' override it, but + * still error out on critical chunks unless the keep value is + * 'always' While this is weird it is the behavior in 1.4.12. + * A possible improvement would be to obey the value set for the + * chunk, but this would be an API change that would probably + * damage some applications. + * + * The png_app_warning below catches the case that matters, where + * the application has not set specific save or ignore for this + * chunk or global save or ignore. + */ + if (keep < PNG_HANDLE_CHUNK_IF_SAFE) + { +# ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED + if (png_ptr->unknown_default < PNG_HANDLE_CHUNK_IF_SAFE) + { + png_chunk_warning(png_ptr, "Saving unknown chunk:"); + png_app_warning(png_ptr, + "forcing save of an unhandled chunk;" + " please call png_set_keep_unknown_chunks"); + /* with keep = PNG_HANDLE_CHUNK_IF_SAFE */ + } +# endif + keep = PNG_HANDLE_CHUNK_IF_SAFE; + } + } + + else /* chunk was handled */ + { + handled = 1; + /* Critical chunks can be safely discarded at this point. */ + keep = PNG_HANDLE_CHUNK_NEVER; + } + } + + else + keep = PNG_HANDLE_CHUNK_NEVER; /* insufficient memory */ + } + + else + /* Use the SAVE_UNKNOWN_CHUNKS code or skip the chunk */ +# endif /* PNG_READ_USER_CHUNKS_SUPPORTED */ + +# ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED + { + /* keep is currently just the per-chunk setting, if there was no + * setting change it to the global default now (not that this may + * still be AS_DEFAULT) then obtain the cache of the chunk if required, + * if not simply skip the chunk. + */ + if (keep == PNG_HANDLE_CHUNK_AS_DEFAULT) + keep = png_ptr->unknown_default; + + if (keep == PNG_HANDLE_CHUNK_ALWAYS || + (keep == PNG_HANDLE_CHUNK_IF_SAFE && + PNG_CHUNK_ANCILLARY(png_ptr->chunk_name))) + { + if (!png_cache_unknown_chunk(png_ptr, length)) + keep = PNG_HANDLE_CHUNK_NEVER; + } + + else + png_crc_finish(png_ptr, length); + } +# else +# ifndef PNG_READ_USER_CHUNKS_SUPPORTED +# error no method to support READ_UNKNOWN_CHUNKS +# endif + + { + /* If here there is no read callback pointer set and no support is + * compiled in to just save the unknown chunks, so simply skip this + * chunk. If 'keep' is something other than AS_DEFAULT or NEVER then + * the app has erroneously asked for unknown chunk saving when there + * is no support. + */ + if (keep > PNG_HANDLE_CHUNK_NEVER) + png_app_error(png_ptr, "no unknown chunk support available"); + + png_crc_finish(png_ptr, length); + } +# endif + +# ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED + /* Now store the chunk in the chunk list if appropriate, and if the limits + * permit it. + */ + if (keep == PNG_HANDLE_CHUNK_ALWAYS || + (keep == PNG_HANDLE_CHUNK_IF_SAFE && + PNG_CHUNK_ANCILLARY(png_ptr->chunk_name))) + { +# ifdef PNG_USER_LIMITS_SUPPORTED + switch (png_ptr->user_chunk_cache_max) + { + case 2: + png_ptr->user_chunk_cache_max = 1; + png_chunk_benign_error(png_ptr, "no space in chunk cache"); + /* FALL THROUGH */ + case 1: + /* NOTE: prior to 1.6.0 this case resulted in an unknown critical + * chunk being skipped, now there will be a hard error below. + */ + break; + + default: /* not at limit */ + --(png_ptr->user_chunk_cache_max); + /* FALL THROUGH */ + case 0: /* no limit */ +# endif /* PNG_USER_LIMITS_SUPPORTED */ + /* Here when the limit isn't reached or when limits are compiled + * out; store the chunk. + */ + png_set_unknown_chunks(png_ptr, info_ptr, + &png_ptr->unknown_chunk, 1); + handled = 1; +# ifdef PNG_USER_LIMITS_SUPPORTED + break; + } +# endif + } +# else /* no store support! */ + PNG_UNUSED(info_ptr) +# error untested code (reading unknown chunks with no store support) +# endif + + /* Regardless of the error handling below the cached data (if any) can be + * freed now. Notice that the data is not freed if there is a png_error, but + * it will be freed by destroy_read_struct. + */ + if (png_ptr->unknown_chunk.data != NULL) + png_free(png_ptr, png_ptr->unknown_chunk.data); + png_ptr->unknown_chunk.data = NULL; + +#else /* !PNG_READ_UNKNOWN_CHUNKS_SUPPORTED */ + /* There is no support to read an unknown chunk, so just skip it. */ + png_crc_finish(png_ptr, length); + PNG_UNUSED(info_ptr) + PNG_UNUSED(keep) +#endif /* !PNG_READ_UNKNOWN_CHUNKS_SUPPORTED */ + + /* Check for unhandled critical chunks */ + if (!handled && PNG_CHUNK_CRITICAL(png_ptr->chunk_name)) + png_chunk_error(png_ptr, "unhandled critical chunk"); +} + +/* This function is called to verify that a chunk name is valid. + * This function can't have the "critical chunk check" incorporated + * into it, since in the future we will need to be able to call user + * functions to handle unknown critical chunks after we check that + * the chunk name itself is valid. + */ + +/* Bit hacking: the test for an invalid byte in the 4 byte chunk name is: + * + * ((c) < 65 || (c) > 122 || ((c) > 90 && (c) < 97)) + */ + +void /* PRIVATE */ +png_check_chunk_name(png_structrp png_ptr, png_uint_32 chunk_name) +{ + int i; + + png_debug(1, "in png_check_chunk_name"); + + for (i=1; i<=4; ++i) + { + int c = chunk_name & 0xff; + + if (c < 65 || c > 122 || (c > 90 && c < 97)) + png_chunk_error(png_ptr, "invalid chunk type"); + + chunk_name >>= 8; + } +} + +/* Combines the row recently read in with the existing pixels in the row. This + * routine takes care of alpha and transparency if requested. This routine also + * handles the two methods of progressive display of interlaced images, + * depending on the 'display' value; if 'display' is true then the whole row + * (dp) is filled from the start by replicating the available pixels. If + * 'display' is false only those pixels present in the pass are filled in. + */ +void /* PRIVATE */ +png_combine_row(png_const_structrp png_ptr, png_bytep dp, int display) +{ + unsigned int pixel_depth = png_ptr->transformed_pixel_depth; + png_const_bytep sp = png_ptr->row_buf + 1; + png_uint_32 row_width = png_ptr->width; + unsigned int pass = png_ptr->pass; + png_bytep end_ptr = 0; + png_byte end_byte = 0; + unsigned int end_mask; + + png_debug(1, "in png_combine_row"); + + /* Added in 1.5.6: it should not be possible to enter this routine until at + * least one row has been read from the PNG data and transformed. + */ + if (pixel_depth == 0) + png_error(png_ptr, "internal row logic error"); + + /* Added in 1.5.4: the pixel depth should match the information returned by + * any call to png_read_update_info at this point. Do not continue if we got + * this wrong. + */ + if (png_ptr->info_rowbytes != 0 && png_ptr->info_rowbytes != + PNG_ROWBYTES(pixel_depth, row_width)) + png_error(png_ptr, "internal row size calculation error"); + + /* Don't expect this to ever happen: */ + if (row_width == 0) + png_error(png_ptr, "internal row width error"); + + /* Preserve the last byte in cases where only part of it will be overwritten, + * the multiply below may overflow, we don't care because ANSI-C guarantees + * we get the low bits. + */ + end_mask = (pixel_depth * row_width) & 7; + if (end_mask != 0) + { + /* end_ptr == NULL is a flag to say do nothing */ + end_ptr = dp + PNG_ROWBYTES(pixel_depth, row_width) - 1; + end_byte = *end_ptr; +# ifdef PNG_READ_PACKSWAP_SUPPORTED + if (png_ptr->transformations & PNG_PACKSWAP) /* little-endian byte */ + end_mask = 0xff << end_mask; + + else /* big-endian byte */ +# endif + end_mask = 0xff >> end_mask; + /* end_mask is now the bits to *keep* from the destination row */ + } + + /* For non-interlaced images this reduces to a memcpy(). A memcpy() + * will also happen if interlacing isn't supported or if the application + * does not call png_set_interlace_handling(). In the latter cases the + * caller just gets a sequence of the unexpanded rows from each interlace + * pass. + */ +#ifdef PNG_READ_INTERLACING_SUPPORTED + if (png_ptr->interlaced && (png_ptr->transformations & PNG_INTERLACE) && + pass < 6 && (display == 0 || + /* The following copies everything for 'display' on passes 0, 2 and 4. */ + (display == 1 && (pass & 1) != 0))) + { + /* Narrow images may have no bits in a pass; the caller should handle + * this, but this test is cheap: + */ + if (row_width <= PNG_PASS_START_COL(pass)) + return; + + if (pixel_depth < 8) + { + /* For pixel depths up to 4 bpp the 8-pixel mask can be expanded to fit + * into 32 bits, then a single loop over the bytes using the four byte + * values in the 32-bit mask can be used. For the 'display' option the + * expanded mask may also not require any masking within a byte. To + * make this work the PACKSWAP option must be taken into account - it + * simply requires the pixels to be reversed in each byte. + * + * The 'regular' case requires a mask for each of the first 6 passes, + * the 'display' case does a copy for the even passes in the range + * 0..6. This has already been handled in the test above. + * + * The masks are arranged as four bytes with the first byte to use in + * the lowest bits (little-endian) regardless of the order (PACKSWAP or + * not) of the pixels in each byte. + * + * NOTE: the whole of this logic depends on the caller of this function + * only calling it on rows appropriate to the pass. This function only + * understands the 'x' logic; the 'y' logic is handled by the caller. + * + * The following defines allow generation of compile time constant bit + * masks for each pixel depth and each possibility of swapped or not + * swapped bytes. Pass 'p' is in the range 0..6; 'x', a pixel index, + * is in the range 0..7; and the result is 1 if the pixel is to be + * copied in the pass, 0 if not. 'S' is for the sparkle method, 'B' + * for the block method. + * + * With some compilers a compile time expression of the general form: + * + * (shift >= 32) ? (a >> (shift-32)) : (b >> shift) + * + * Produces warnings with values of 'shift' in the range 33 to 63 + * because the right hand side of the ?: expression is evaluated by + * the compiler even though it isn't used. Microsoft Visual C (various + * versions) and the Intel C compiler are known to do this. To avoid + * this the following macros are used in 1.5.6. This is a temporary + * solution to avoid destabilizing the code during the release process. + */ +# if PNG_USE_COMPILE_TIME_MASKS +# define PNG_LSR(x,s) ((x)>>((s) & 0x1f)) +# define PNG_LSL(x,s) ((x)<<((s) & 0x1f)) +# else +# define PNG_LSR(x,s) ((x)>>(s)) +# define PNG_LSL(x,s) ((x)<<(s)) +# endif +# define S_COPY(p,x) (((p)<4 ? PNG_LSR(0x80088822,(3-(p))*8+(7-(x))) :\ + PNG_LSR(0xaa55ff00,(7-(p))*8+(7-(x)))) & 1) +# define B_COPY(p,x) (((p)<4 ? PNG_LSR(0xff0fff33,(3-(p))*8+(7-(x))) :\ + PNG_LSR(0xff55ff00,(7-(p))*8+(7-(x)))) & 1) + + /* Return a mask for pass 'p' pixel 'x' at depth 'd'. The mask is + * little endian - the first pixel is at bit 0 - however the extra + * parameter 's' can be set to cause the mask position to be swapped + * within each byte, to match the PNG format. This is done by XOR of + * the shift with 7, 6 or 4 for bit depths 1, 2 and 4. + */ +# define PIXEL_MASK(p,x,d,s) \ + (PNG_LSL(((PNG_LSL(1U,(d)))-1),(((x)*(d))^((s)?8-(d):0)))) + + /* Hence generate the appropriate 'block' or 'sparkle' pixel copy mask. + */ +# define S_MASKx(p,x,d,s) (S_COPY(p,x)?PIXEL_MASK(p,x,d,s):0) +# define B_MASKx(p,x,d,s) (B_COPY(p,x)?PIXEL_MASK(p,x,d,s):0) + + /* Combine 8 of these to get the full mask. For the 1-bpp and 2-bpp + * cases the result needs replicating, for the 4-bpp case the above + * generates a full 32 bits. + */ +# define MASK_EXPAND(m,d) ((m)*((d)==1?0x01010101:((d)==2?0x00010001:1))) + +# define S_MASK(p,d,s) MASK_EXPAND(S_MASKx(p,0,d,s) + S_MASKx(p,1,d,s) +\ + S_MASKx(p,2,d,s) + S_MASKx(p,3,d,s) + S_MASKx(p,4,d,s) +\ + S_MASKx(p,5,d,s) + S_MASKx(p,6,d,s) + S_MASKx(p,7,d,s), d) + +# define B_MASK(p,d,s) MASK_EXPAND(B_MASKx(p,0,d,s) + B_MASKx(p,1,d,s) +\ + B_MASKx(p,2,d,s) + B_MASKx(p,3,d,s) + B_MASKx(p,4,d,s) +\ + B_MASKx(p,5,d,s) + B_MASKx(p,6,d,s) + B_MASKx(p,7,d,s), d) + +#if PNG_USE_COMPILE_TIME_MASKS + /* Utility macros to construct all the masks for a depth/swap + * combination. The 's' parameter says whether the format is PNG + * (big endian bytes) or not. Only the three odd-numbered passes are + * required for the display/block algorithm. + */ +# define S_MASKS(d,s) { S_MASK(0,d,s), S_MASK(1,d,s), S_MASK(2,d,s),\ + S_MASK(3,d,s), S_MASK(4,d,s), S_MASK(5,d,s) } + +# define B_MASKS(d,s) { B_MASK(1,d,s), S_MASK(3,d,s), S_MASK(5,d,s) } + +# define DEPTH_INDEX(d) ((d)==1?0:((d)==2?1:2)) + + /* Hence the pre-compiled masks indexed by PACKSWAP (or not), depth and + * then pass: + */ + static PNG_CONST png_uint_32 row_mask[2/*PACKSWAP*/][3/*depth*/][6] = + { + /* Little-endian byte masks for PACKSWAP */ + { S_MASKS(1,0), S_MASKS(2,0), S_MASKS(4,0) }, + /* Normal (big-endian byte) masks - PNG format */ + { S_MASKS(1,1), S_MASKS(2,1), S_MASKS(4,1) } + }; + + /* display_mask has only three entries for the odd passes, so index by + * pass>>1. + */ + static PNG_CONST png_uint_32 display_mask[2][3][3] = + { + /* Little-endian byte masks for PACKSWAP */ + { B_MASKS(1,0), B_MASKS(2,0), B_MASKS(4,0) }, + /* Normal (big-endian byte) masks - PNG format */ + { B_MASKS(1,1), B_MASKS(2,1), B_MASKS(4,1) } + }; + +# define MASK(pass,depth,display,png)\ + ((display)?display_mask[png][DEPTH_INDEX(depth)][pass>>1]:\ + row_mask[png][DEPTH_INDEX(depth)][pass]) + +#else /* !PNG_USE_COMPILE_TIME_MASKS */ + /* This is the runtime alternative: it seems unlikely that this will + * ever be either smaller or faster than the compile time approach. + */ +# define MASK(pass,depth,display,png)\ + ((display)?B_MASK(pass,depth,png):S_MASK(pass,depth,png)) +#endif /* !PNG_USE_COMPILE_TIME_MASKS */ + + /* Use the appropriate mask to copy the required bits. In some cases + * the byte mask will be 0 or 0xff, optimize these cases. row_width is + * the number of pixels, but the code copies bytes, so it is necessary + * to special case the end. + */ + png_uint_32 pixels_per_byte = 8 / pixel_depth; + png_uint_32 mask; + +# ifdef PNG_READ_PACKSWAP_SUPPORTED + if (png_ptr->transformations & PNG_PACKSWAP) + mask = MASK(pass, pixel_depth, display, 0); + + else +# endif + mask = MASK(pass, pixel_depth, display, 1); + + for (;;) + { + png_uint_32 m; + + /* It doesn't matter in the following if png_uint_32 has more than + * 32 bits because the high bits always match those in m<<24; it is, + * however, essential to use OR here, not +, because of this. + */ + m = mask; + mask = (m >> 8) | (m << 24); /* rotate right to good compilers */ + m &= 0xff; + + if (m != 0) /* something to copy */ + { + if (m != 0xff) + *dp = (png_byte)((*dp & ~m) | (*sp & m)); + else + *dp = *sp; + } + + /* NOTE: this may overwrite the last byte with garbage if the image + * is not an exact number of bytes wide; libpng has always done + * this. + */ + if (row_width <= pixels_per_byte) + break; /* May need to restore part of the last byte */ + + row_width -= pixels_per_byte; + ++dp; + ++sp; + } + } + + else /* pixel_depth >= 8 */ + { + unsigned int bytes_to_copy, bytes_to_jump; + + /* Validate the depth - it must be a multiple of 8 */ + if (pixel_depth & 7) + png_error(png_ptr, "invalid user transform pixel depth"); + + pixel_depth >>= 3; /* now in bytes */ + row_width *= pixel_depth; + + /* Regardless of pass number the Adam 7 interlace always results in a + * fixed number of pixels to copy then to skip. There may be a + * different number of pixels to skip at the start though. + */ + { + unsigned int offset = PNG_PASS_START_COL(pass) * pixel_depth; + + row_width -= offset; + dp += offset; + sp += offset; + } + + /* Work out the bytes to copy. */ + if (display) + { + /* When doing the 'block' algorithm the pixel in the pass gets + * replicated to adjacent pixels. This is why the even (0,2,4,6) + * passes are skipped above - the entire expanded row is copied. + */ + bytes_to_copy = (1<<((6-pass)>>1)) * pixel_depth; + + /* But don't allow this number to exceed the actual row width. */ + if (bytes_to_copy > row_width) + bytes_to_copy = row_width; + } + + else /* normal row; Adam7 only ever gives us one pixel to copy. */ + bytes_to_copy = pixel_depth; + + /* In Adam7 there is a constant offset between where the pixels go. */ + bytes_to_jump = PNG_PASS_COL_OFFSET(pass) * pixel_depth; + + /* And simply copy these bytes. Some optimization is possible here, + * depending on the value of 'bytes_to_copy'. Special case the low + * byte counts, which we know to be frequent. + * + * Notice that these cases all 'return' rather than 'break' - this + * avoids an unnecessary test on whether to restore the last byte + * below. + */ + switch (bytes_to_copy) + { + case 1: + for (;;) + { + *dp = *sp; + + if (row_width <= bytes_to_jump) + return; + + dp += bytes_to_jump; + sp += bytes_to_jump; + row_width -= bytes_to_jump; + } + + case 2: + /* There is a possibility of a partial copy at the end here; this + * slows the code down somewhat. + */ + do + { + dp[0] = sp[0], dp[1] = sp[1]; + + if (row_width <= bytes_to_jump) + return; + + sp += bytes_to_jump; + dp += bytes_to_jump; + row_width -= bytes_to_jump; + } + while (row_width > 1); + + /* And there can only be one byte left at this point: */ + *dp = *sp; + return; + + case 3: + /* This can only be the RGB case, so each copy is exactly one + * pixel and it is not necessary to check for a partial copy. + */ + for(;;) + { + dp[0] = sp[0], dp[1] = sp[1], dp[2] = sp[2]; + + if (row_width <= bytes_to_jump) + return; + + sp += bytes_to_jump; + dp += bytes_to_jump; + row_width -= bytes_to_jump; + } + + default: +#if PNG_ALIGN_TYPE != PNG_ALIGN_NONE + /* Check for double byte alignment and, if possible, use a + * 16-bit copy. Don't attempt this for narrow images - ones that + * are less than an interlace panel wide. Don't attempt it for + * wide bytes_to_copy either - use the memcpy there. + */ + if (bytes_to_copy < 16 /*else use memcpy*/ && + png_isaligned(dp, png_uint_16) && + png_isaligned(sp, png_uint_16) && + bytes_to_copy % (sizeof (png_uint_16)) == 0 && + bytes_to_jump % (sizeof (png_uint_16)) == 0) + { + /* Everything is aligned for png_uint_16 copies, but try for + * png_uint_32 first. + */ + if (png_isaligned(dp, png_uint_32) && + png_isaligned(sp, png_uint_32) && + bytes_to_copy % (sizeof (png_uint_32)) == 0 && + bytes_to_jump % (sizeof (png_uint_32)) == 0) + { + png_uint_32p dp32 = png_aligncast(png_uint_32p,dp); + png_const_uint_32p sp32 = png_aligncastconst( + png_const_uint_32p, sp); + size_t skip = (bytes_to_jump-bytes_to_copy) / + (sizeof (png_uint_32)); + + do + { + size_t c = bytes_to_copy; + do + { + *dp32++ = *sp32++; + c -= (sizeof (png_uint_32)); + } + while (c > 0); + + if (row_width <= bytes_to_jump) + return; + + dp32 += skip; + sp32 += skip; + row_width -= bytes_to_jump; + } + while (bytes_to_copy <= row_width); + + /* Get to here when the row_width truncates the final copy. + * There will be 1-3 bytes left to copy, so don't try the + * 16-bit loop below. + */ + dp = (png_bytep)dp32; + sp = (png_const_bytep)sp32; + do + *dp++ = *sp++; + while (--row_width > 0); + return; + } + + /* Else do it in 16-bit quantities, but only if the size is + * not too large. + */ + else + { + png_uint_16p dp16 = png_aligncast(png_uint_16p, dp); + png_const_uint_16p sp16 = png_aligncastconst( + png_const_uint_16p, sp); + size_t skip = (bytes_to_jump-bytes_to_copy) / + (sizeof (png_uint_16)); + + do + { + size_t c = bytes_to_copy; + do + { + *dp16++ = *sp16++; + c -= (sizeof (png_uint_16)); + } + while (c > 0); + + if (row_width <= bytes_to_jump) + return; + + dp16 += skip; + sp16 += skip; + row_width -= bytes_to_jump; + } + while (bytes_to_copy <= row_width); + + /* End of row - 1 byte left, bytes_to_copy > row_width: */ + dp = (png_bytep)dp16; + sp = (png_const_bytep)sp16; + do + *dp++ = *sp++; + while (--row_width > 0); + return; + } + } +#endif /* PNG_ALIGN_ code */ + + /* The true default - use a memcpy: */ + for (;;) + { + memcpy(dp, sp, bytes_to_copy); + + if (row_width <= bytes_to_jump) + return; + + sp += bytes_to_jump; + dp += bytes_to_jump; + row_width -= bytes_to_jump; + if (bytes_to_copy > row_width) + bytes_to_copy = row_width; + } + } + + /* NOT REACHED*/ + } /* pixel_depth >= 8 */ + + /* Here if pixel_depth < 8 to check 'end_ptr' below. */ + } + else +#endif + + /* If here then the switch above wasn't used so just memcpy the whole row + * from the temporary row buffer (notice that this overwrites the end of the + * destination row if it is a partial byte.) + */ + memcpy(dp, sp, PNG_ROWBYTES(pixel_depth, row_width)); + + /* Restore the overwritten bits from the last byte if necessary. */ + if (end_ptr != NULL) + *end_ptr = (png_byte)((end_byte & end_mask) | (*end_ptr & ~end_mask)); +} + +#ifdef PNG_READ_INTERLACING_SUPPORTED +void /* PRIVATE */ +png_do_read_interlace(png_row_infop row_info, png_bytep row, int pass, + png_uint_32 transformations /* Because these may affect the byte layout */) +{ + /* Arrays to facilitate easy interlacing - use pass (0 - 6) as index */ + /* Offset to next interlace block */ + static PNG_CONST int png_pass_inc[7] = {8, 8, 4, 4, 2, 2, 1}; + + png_debug(1, "in png_do_read_interlace"); + if (row != NULL && row_info != NULL) + { + png_uint_32 final_width; + + final_width = row_info->width * png_pass_inc[pass]; + + switch (row_info->pixel_depth) + { + case 1: + { + png_bytep sp = row + (png_size_t)((row_info->width - 1) >> 3); + png_bytep dp = row + (png_size_t)((final_width - 1) >> 3); + int sshift, dshift; + int s_start, s_end, s_inc; + int jstop = png_pass_inc[pass]; + png_byte v; + png_uint_32 i; + int j; + +#ifdef PNG_READ_PACKSWAP_SUPPORTED + if (transformations & PNG_PACKSWAP) + { + sshift = (int)((row_info->width + 7) & 0x07); + dshift = (int)((final_width + 7) & 0x07); + s_start = 7; + s_end = 0; + s_inc = -1; + } + + else +#endif + { + sshift = 7 - (int)((row_info->width + 7) & 0x07); + dshift = 7 - (int)((final_width + 7) & 0x07); + s_start = 0; + s_end = 7; + s_inc = 1; + } + + for (i = 0; i < row_info->width; i++) + { + v = (png_byte)((*sp >> sshift) & 0x01); + for (j = 0; j < jstop; j++) + { + unsigned int tmp = *dp & (0x7f7f >> (7 - dshift)); + tmp |= v << dshift; + *dp = (png_byte)(tmp & 0xff); + + if (dshift == s_end) + { + dshift = s_start; + dp--; + } + + else + dshift += s_inc; + } + + if (sshift == s_end) + { + sshift = s_start; + sp--; + } + + else + sshift += s_inc; + } + break; + } + + case 2: + { + png_bytep sp = row + (png_uint_32)((row_info->width - 1) >> 2); + png_bytep dp = row + (png_uint_32)((final_width - 1) >> 2); + int sshift, dshift; + int s_start, s_end, s_inc; + int jstop = png_pass_inc[pass]; + png_uint_32 i; + +#ifdef PNG_READ_PACKSWAP_SUPPORTED + if (transformations & PNG_PACKSWAP) + { + sshift = (int)(((row_info->width + 3) & 0x03) << 1); + dshift = (int)(((final_width + 3) & 0x03) << 1); + s_start = 6; + s_end = 0; + s_inc = -2; + } + + else +#endif + { + sshift = (int)((3 - ((row_info->width + 3) & 0x03)) << 1); + dshift = (int)((3 - ((final_width + 3) & 0x03)) << 1); + s_start = 0; + s_end = 6; + s_inc = 2; + } + + for (i = 0; i < row_info->width; i++) + { + png_byte v; + int j; + + v = (png_byte)((*sp >> sshift) & 0x03); + for (j = 0; j < jstop; j++) + { + unsigned int tmp = *dp & (0x3f3f >> (6 - dshift)); + tmp |= v << dshift; + *dp = (png_byte)(tmp & 0xff); + + if (dshift == s_end) + { + dshift = s_start; + dp--; + } + + else + dshift += s_inc; + } + + if (sshift == s_end) + { + sshift = s_start; + sp--; + } + + else + sshift += s_inc; + } + break; + } + + case 4: + { + png_bytep sp = row + (png_size_t)((row_info->width - 1) >> 1); + png_bytep dp = row + (png_size_t)((final_width - 1) >> 1); + int sshift, dshift; + int s_start, s_end, s_inc; + png_uint_32 i; + int jstop = png_pass_inc[pass]; + +#ifdef PNG_READ_PACKSWAP_SUPPORTED + if (transformations & PNG_PACKSWAP) + { + sshift = (int)(((row_info->width + 1) & 0x01) << 2); + dshift = (int)(((final_width + 1) & 0x01) << 2); + s_start = 4; + s_end = 0; + s_inc = -4; + } + + else +#endif + { + sshift = (int)((1 - ((row_info->width + 1) & 0x01)) << 2); + dshift = (int)((1 - ((final_width + 1) & 0x01)) << 2); + s_start = 0; + s_end = 4; + s_inc = 4; + } + + for (i = 0; i < row_info->width; i++) + { + png_byte v = (png_byte)((*sp >> sshift) & 0x0f); + int j; + + for (j = 0; j < jstop; j++) + { + unsigned int tmp = *dp & (0xf0f >> (4 - dshift)); + tmp |= v << dshift; + *dp = (png_byte)(tmp & 0xff); + + if (dshift == s_end) + { + dshift = s_start; + dp--; + } + + else + dshift += s_inc; + } + + if (sshift == s_end) + { + sshift = s_start; + sp--; + } + + else + sshift += s_inc; + } + break; + } + + default: + { + png_size_t pixel_bytes = (row_info->pixel_depth >> 3); + + png_bytep sp = row + (png_size_t)(row_info->width - 1) + * pixel_bytes; + + png_bytep dp = row + (png_size_t)(final_width - 1) * pixel_bytes; + + int jstop = png_pass_inc[pass]; + png_uint_32 i; + + for (i = 0; i < row_info->width; i++) + { + png_byte v[8]; + int j; + + memcpy(v, sp, pixel_bytes); + + for (j = 0; j < jstop; j++) + { + memcpy(dp, v, pixel_bytes); + dp -= pixel_bytes; + } + + sp -= pixel_bytes; + } + break; + } + } + + row_info->width = final_width; + row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, final_width); + } +#ifndef PNG_READ_PACKSWAP_SUPPORTED + PNG_UNUSED(transformations) /* Silence compiler warning */ +#endif +} +#endif /* PNG_READ_INTERLACING_SUPPORTED */ + +static void +png_read_filter_row_sub(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + png_size_t i; + png_size_t istop = row_info->rowbytes; + unsigned int bpp = (row_info->pixel_depth + 7) >> 3; + png_bytep rp = row + bpp; + + PNG_UNUSED(prev_row) + + for (i = bpp; i < istop; i++) + { + *rp = (png_byte)(((int)(*rp) + (int)(*(rp-bpp))) & 0xff); + rp++; + } +} + +static void +png_read_filter_row_up(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + png_size_t i; + png_size_t istop = row_info->rowbytes; + png_bytep rp = row; + png_const_bytep pp = prev_row; + + for (i = 0; i < istop; i++) + { + *rp = (png_byte)(((int)(*rp) + (int)(*pp++)) & 0xff); + rp++; + } +} + +static void +png_read_filter_row_avg(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + png_size_t i; + png_bytep rp = row; + png_const_bytep pp = prev_row; + unsigned int bpp = (row_info->pixel_depth + 7) >> 3; + png_size_t istop = row_info->rowbytes - bpp; + + for (i = 0; i < bpp; i++) + { + *rp = (png_byte)(((int)(*rp) + + ((int)(*pp++) / 2 )) & 0xff); + + rp++; + } + + for (i = 0; i < istop; i++) + { + *rp = (png_byte)(((int)(*rp) + + (int)(*pp++ + *(rp-bpp)) / 2 ) & 0xff); + + rp++; + } +} + +static void +png_read_filter_row_paeth_1byte_pixel(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + png_bytep rp_end = row + row_info->rowbytes; + int a, c; + + /* First pixel/byte */ + c = *prev_row++; + a = *row + c; + *row++ = (png_byte)a; + + /* Remainder */ + while (row < rp_end) + { + int b, pa, pb, pc, p; + + a &= 0xff; /* From previous iteration or start */ + b = *prev_row++; + + p = b - c; + pc = a - c; + +# ifdef PNG_USE_ABS + pa = abs(p); + pb = abs(pc); + pc = abs(p + pc); +# else + pa = p < 0 ? -p : p; + pb = pc < 0 ? -pc : pc; + pc = (p + pc) < 0 ? -(p + pc) : p + pc; +# endif + + /* Find the best predictor, the least of pa, pb, pc favoring the earlier + * ones in the case of a tie. + */ + if (pb < pa) pa = pb, a = b; + if (pc < pa) a = c; + + /* Calculate the current pixel in a, and move the previous row pixel to c + * for the next time round the loop + */ + c = b; + a += *row; + *row++ = (png_byte)a; + } +} + +static void +png_read_filter_row_paeth_multibyte_pixel(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + int bpp = (row_info->pixel_depth + 7) >> 3; + png_bytep rp_end = row + bpp; + + /* Process the first pixel in the row completely (this is the same as 'up' + * because there is only one candidate predictor for the first row). + */ + while (row < rp_end) + { + int a = *row + *prev_row++; + *row++ = (png_byte)a; + } + + /* Remainder */ + rp_end += row_info->rowbytes - bpp; + + while (row < rp_end) + { + int a, b, c, pa, pb, pc, p; + + c = *(prev_row - bpp); + a = *(row - bpp); + b = *prev_row++; + + p = b - c; + pc = a - c; + +# ifdef PNG_USE_ABS + pa = abs(p); + pb = abs(pc); + pc = abs(p + pc); +# else + pa = p < 0 ? -p : p; + pb = pc < 0 ? -pc : pc; + pc = (p + pc) < 0 ? -(p + pc) : p + pc; +# endif + + if (pb < pa) pa = pb, a = b; + if (pc < pa) a = c; + + c = b; + a += *row; + *row++ = (png_byte)a; + } +} + +static void +png_init_filter_functions(png_structrp pp) + /* This function is called once for every PNG image to set the + * implementations required to reverse the filtering of PNG rows. Reversing + * the filter is the first transformation performed on the row data. It is + * performed in place, therefore an implementation can be selected based on + * the image pixel format. If the implementation depends on image width then + * take care to ensure that it works correctly if the image is interlaced - + * interlacing causes the actual row width to vary. + */ +{ + unsigned int bpp = (pp->pixel_depth + 7) >> 3; + + pp->read_filter[PNG_FILTER_VALUE_SUB-1] = png_read_filter_row_sub; + pp->read_filter[PNG_FILTER_VALUE_UP-1] = png_read_filter_row_up; + pp->read_filter[PNG_FILTER_VALUE_AVG-1] = png_read_filter_row_avg; + if (bpp == 1) + pp->read_filter[PNG_FILTER_VALUE_PAETH-1] = + png_read_filter_row_paeth_1byte_pixel; + else + pp->read_filter[PNG_FILTER_VALUE_PAETH-1] = + png_read_filter_row_paeth_multibyte_pixel; + +#ifdef PNG_FILTER_OPTIMIZATIONS + /* To use this define PNG_FILTER_OPTIMIZATIONS as the name of a function to + * call to install hardware optimizations for the above functions; simply + * replace whatever elements of the pp->read_filter[] array with a hardware + * specific (or, for that matter, generic) optimization. + * + * To see an example of this examine what configure.ac does when + * --enable-arm-neon is specified on the command line. + */ + PNG_FILTER_OPTIMIZATIONS(pp, bpp); +#endif +} + +void /* PRIVATE */ +png_read_filter_row(png_structrp pp, png_row_infop row_info, png_bytep row, + png_const_bytep prev_row, int filter) +{ + /* OPTIMIZATION: DO NOT MODIFY THIS FUNCTION, instead #define + * PNG_FILTER_OPTIMIZATIONS to a function that overrides the generic + * implementations. See png_init_filter_functions above. + */ + if (pp->read_filter[0] == NULL) + png_init_filter_functions(pp); + if (filter > PNG_FILTER_VALUE_NONE && filter < PNG_FILTER_VALUE_LAST) + pp->read_filter[filter-1](row_info, row, prev_row); +} + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +void /* PRIVATE */ +png_read_IDAT_data(png_structrp png_ptr, png_bytep output, + png_alloc_size_t avail_out) +{ + /* Loop reading IDATs and decompressing the result into output[avail_out] */ + png_ptr->zstream.next_out = output; + png_ptr->zstream.avail_out = 0; /* safety: set below */ + + if (output == NULL) + avail_out = 0; + + do + { + int ret; + png_byte tmpbuf[PNG_INFLATE_BUF_SIZE]; + + if (png_ptr->zstream.avail_in == 0) + { + uInt avail_in; + png_bytep buffer; + + while (png_ptr->idat_size == 0) + { + png_crc_finish(png_ptr, 0); + + png_ptr->idat_size = png_read_chunk_header(png_ptr); + /* This is an error even in the 'check' case because the code just + * consumed a non-IDAT header. + */ + if (png_ptr->chunk_name != png_IDAT) + png_error(png_ptr, "Not enough image data"); + } + + avail_in = png_ptr->IDAT_read_size; + + if (avail_in > png_ptr->idat_size) + avail_in = (uInt)png_ptr->idat_size; + + /* A PNG with a gradually increasing IDAT size will defeat this attempt + * to minimize memory usage by causing lots of re-allocs, but + * realistically doing IDAT_read_size re-allocs is not likely to be a + * big problem. + */ + buffer = png_read_buffer(png_ptr, avail_in, 0/*error*/); + + png_crc_read(png_ptr, buffer, avail_in); + png_ptr->idat_size -= avail_in; + + png_ptr->zstream.next_in = buffer; + png_ptr->zstream.avail_in = avail_in; + } + + /* And set up the output side. */ + if (output != NULL) /* standard read */ + { + uInt out = ZLIB_IO_MAX; + + if (out > avail_out) + out = (uInt)avail_out; + + avail_out -= out; + png_ptr->zstream.avail_out = out; + } + + else /* after last row, checking for end */ + { + png_ptr->zstream.next_out = tmpbuf; + png_ptr->zstream.avail_out = (sizeof tmpbuf); + } + + /* Use NO_FLUSH; this gives zlib the maximum opportunity to optimize the + * process. If the LZ stream is truncated the sequential reader will + * terminally damage the stream, above, by reading the chunk header of the + * following chunk (it then exits with png_error). + * + * TODO: deal more elegantly with truncated IDAT lists. + */ + ret = inflate(&png_ptr->zstream, Z_NO_FLUSH); + + /* Take the unconsumed output back. */ + if (output != NULL) + avail_out += png_ptr->zstream.avail_out; + + else /* avail_out counts the extra bytes */ + avail_out += (sizeof tmpbuf) - png_ptr->zstream.avail_out; + + png_ptr->zstream.avail_out = 0; + + if (ret == Z_STREAM_END) + { + /* Do this for safety; we won't read any more into this row. */ + png_ptr->zstream.next_out = NULL; + + png_ptr->mode |= PNG_AFTER_IDAT; + png_ptr->flags |= PNG_FLAG_ZSTREAM_ENDED; + + if (png_ptr->zstream.avail_in > 0 || png_ptr->idat_size > 0) + png_chunk_benign_error(png_ptr, "Extra compressed data"); + break; + } + + if (ret != Z_OK) + { + png_zstream_error(png_ptr, ret); + + if (output != NULL) + png_chunk_error(png_ptr, png_ptr->zstream.msg); + + else /* checking */ + { + png_chunk_benign_error(png_ptr, png_ptr->zstream.msg); + return; + } + } + } while (avail_out > 0); + + if (avail_out > 0) + { + /* The stream ended before the image; this is the same as too few IDATs so + * should be handled the same way. + */ + if (output != NULL) + png_error(png_ptr, "Not enough image data"); + + else /* the deflate stream contained extra data */ + png_chunk_benign_error(png_ptr, "Too much image data"); + } +} + +void /* PRIVATE */ +png_read_finish_IDAT(png_structrp png_ptr) +{ + /* We don't need any more data and the stream should have ended, however the + * LZ end code may actually not have been processed. In this case we must + * read it otherwise stray unread IDAT data or, more likely, an IDAT chunk + * may still remain to be consumed. + */ + if (!(png_ptr->flags & PNG_FLAG_ZSTREAM_ENDED)) + { + /* The NULL causes png_read_IDAT_data to swallow any remaining bytes in + * the compressed stream, but the stream may be damaged too, so even after + * this call we may need to terminate the zstream ownership. + */ + png_read_IDAT_data(png_ptr, NULL, 0); + png_ptr->zstream.next_out = NULL; /* safety */ + + /* Now clear everything out for safety; the following may not have been + * done. + */ + if (!(png_ptr->flags & PNG_FLAG_ZSTREAM_ENDED)) + { + png_ptr->mode |= PNG_AFTER_IDAT; + png_ptr->flags |= PNG_FLAG_ZSTREAM_ENDED; + } + } + + /* If the zstream has not been released do it now *and* terminate the reading + * of the final IDAT chunk. + */ + if (png_ptr->zowner == png_IDAT) + { + /* Always do this; the pointers otherwise point into the read buffer. */ + png_ptr->zstream.next_in = NULL; + png_ptr->zstream.avail_in = 0; + + /* Now we no longer own the zstream. */ + png_ptr->zowner = 0; + + /* The slightly weird semantics of the sequential IDAT reading is that we + * are always in or at the end of an IDAT chunk, so we always need to do a + * crc_finish here. If idat_size is non-zero we also need to read the + * spurious bytes at the end of the chunk now. + */ + (void)png_crc_finish(png_ptr, png_ptr->idat_size); + } +} + +void /* PRIVATE */ +png_read_finish_row(png_structrp png_ptr) +{ +#ifdef PNG_READ_INTERLACING_SUPPORTED + /* Arrays to facilitate easy interlacing - use pass (0 - 6) as index */ + + /* Start of interlace block */ + static PNG_CONST png_byte png_pass_start[7] = {0, 4, 0, 2, 0, 1, 0}; + + /* Offset to next interlace block */ + static PNG_CONST png_byte png_pass_inc[7] = {8, 8, 4, 4, 2, 2, 1}; + + /* Start of interlace block in the y direction */ + static PNG_CONST png_byte png_pass_ystart[7] = {0, 0, 4, 0, 2, 0, 1}; + + /* Offset to next interlace block in the y direction */ + static PNG_CONST png_byte png_pass_yinc[7] = {8, 8, 8, 4, 4, 2, 2}; +#endif /* PNG_READ_INTERLACING_SUPPORTED */ + + png_debug(1, "in png_read_finish_row"); + png_ptr->row_number++; + if (png_ptr->row_number < png_ptr->num_rows) + return; + +#ifdef PNG_READ_INTERLACING_SUPPORTED + if (png_ptr->interlaced) + { + png_ptr->row_number = 0; + + /* TO DO: don't do this if prev_row isn't needed (requires + * read-ahead of the next row's filter byte. + */ + memset(png_ptr->prev_row, 0, png_ptr->rowbytes + 1); + + do + { + png_ptr->pass++; + + if (png_ptr->pass >= 7) + break; + + png_ptr->iwidth = (png_ptr->width + + png_pass_inc[png_ptr->pass] - 1 - + png_pass_start[png_ptr->pass]) / + png_pass_inc[png_ptr->pass]; + + if (!(png_ptr->transformations & PNG_INTERLACE)) + { + png_ptr->num_rows = (png_ptr->height + + png_pass_yinc[png_ptr->pass] - 1 - + png_pass_ystart[png_ptr->pass]) / + png_pass_yinc[png_ptr->pass]; + } + + else /* if (png_ptr->transformations & PNG_INTERLACE) */ + break; /* libpng deinterlacing sees every row */ + + } while (png_ptr->num_rows == 0 || png_ptr->iwidth == 0); + + if (png_ptr->pass < 7) + return; + } +#endif /* PNG_READ_INTERLACING_SUPPORTED */ + + /* Here after at the end of the last row of the last pass. */ + png_read_finish_IDAT(png_ptr); +} +#endif /* PNG_SEQUENTIAL_READ_SUPPORTED */ + +void /* PRIVATE */ +png_read_start_row(png_structrp png_ptr) +{ +#ifdef PNG_READ_INTERLACING_SUPPORTED + /* Arrays to facilitate easy interlacing - use pass (0 - 6) as index */ + + /* Start of interlace block */ + static PNG_CONST png_byte png_pass_start[7] = {0, 4, 0, 2, 0, 1, 0}; + + /* Offset to next interlace block */ + static PNG_CONST png_byte png_pass_inc[7] = {8, 8, 4, 4, 2, 2, 1}; + + /* Start of interlace block in the y direction */ + static PNG_CONST png_byte png_pass_ystart[7] = {0, 0, 4, 0, 2, 0, 1}; + + /* Offset to next interlace block in the y direction */ + static PNG_CONST png_byte png_pass_yinc[7] = {8, 8, 8, 4, 4, 2, 2}; +#endif + + int max_pixel_depth; + png_size_t row_bytes; + + png_debug(1, "in png_read_start_row"); + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED + png_init_read_transformations(png_ptr); +#endif +#ifdef PNG_READ_INTERLACING_SUPPORTED + if (png_ptr->interlaced) + { + if (!(png_ptr->transformations & PNG_INTERLACE)) + png_ptr->num_rows = (png_ptr->height + png_pass_yinc[0] - 1 - + png_pass_ystart[0]) / png_pass_yinc[0]; + + else + png_ptr->num_rows = png_ptr->height; + + png_ptr->iwidth = (png_ptr->width + + png_pass_inc[png_ptr->pass] - 1 - + png_pass_start[png_ptr->pass]) / + png_pass_inc[png_ptr->pass]; + } + + else +#endif /* PNG_READ_INTERLACING_SUPPORTED */ + { + png_ptr->num_rows = png_ptr->height; + png_ptr->iwidth = png_ptr->width; + } + + max_pixel_depth = png_ptr->pixel_depth; + + /* WARNING: * png_read_transform_info (pngrtran.c) performs a simpliar set of + * calculations to calculate the final pixel depth, then + * png_do_read_transforms actually does the transforms. This means that the + * code which effectively calculates this value is actually repeated in three + * separate places. They must all match. Innocent changes to the order of + * transformations can and will break libpng in a way that causes memory + * overwrites. + * + * TODO: fix this. + */ +#ifdef PNG_READ_PACK_SUPPORTED + if ((png_ptr->transformations & PNG_PACK) && png_ptr->bit_depth < 8) + max_pixel_depth = 8; +#endif + +#ifdef PNG_READ_EXPAND_SUPPORTED + if (png_ptr->transformations & PNG_EXPAND) + { + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + { + if (png_ptr->num_trans) + max_pixel_depth = 32; + + else + max_pixel_depth = 24; + } + + else if (png_ptr->color_type == PNG_COLOR_TYPE_GRAY) + { + if (max_pixel_depth < 8) + max_pixel_depth = 8; + + if (png_ptr->num_trans) + max_pixel_depth *= 2; + } + + else if (png_ptr->color_type == PNG_COLOR_TYPE_RGB) + { + if (png_ptr->num_trans) + { + max_pixel_depth *= 4; + max_pixel_depth /= 3; + } + } + } +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED + if (png_ptr->transformations & PNG_EXPAND_16) + { +# ifdef PNG_READ_EXPAND_SUPPORTED + /* In fact it is an error if it isn't supported, but checking is + * the safe way. + */ + if (png_ptr->transformations & PNG_EXPAND) + { + if (png_ptr->bit_depth < 16) + max_pixel_depth *= 2; + } + else +# endif + png_ptr->transformations &= ~PNG_EXPAND_16; + } +#endif + +#ifdef PNG_READ_FILLER_SUPPORTED + if (png_ptr->transformations & (PNG_FILLER)) + { + if (png_ptr->color_type == PNG_COLOR_TYPE_GRAY) + { + if (max_pixel_depth <= 8) + max_pixel_depth = 16; + + else + max_pixel_depth = 32; + } + + else if (png_ptr->color_type == PNG_COLOR_TYPE_RGB || + png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + { + if (max_pixel_depth <= 32) + max_pixel_depth = 32; + + else + max_pixel_depth = 64; + } + } +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED + if (png_ptr->transformations & PNG_GRAY_TO_RGB) + { + if ( +#ifdef PNG_READ_EXPAND_SUPPORTED + (png_ptr->num_trans && (png_ptr->transformations & PNG_EXPAND)) || +#endif +#ifdef PNG_READ_FILLER_SUPPORTED + (png_ptr->transformations & (PNG_FILLER)) || +#endif + png_ptr->color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + { + if (max_pixel_depth <= 16) + max_pixel_depth = 32; + + else + max_pixel_depth = 64; + } + + else + { + if (max_pixel_depth <= 8) + { + if (png_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + max_pixel_depth = 32; + + else + max_pixel_depth = 24; + } + + else if (png_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + max_pixel_depth = 64; + + else + max_pixel_depth = 48; + } + } +#endif + +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) && \ +defined(PNG_USER_TRANSFORM_PTR_SUPPORTED) + if (png_ptr->transformations & PNG_USER_TRANSFORM) + { + int user_pixel_depth = png_ptr->user_transform_depth * + png_ptr->user_transform_channels; + + if (user_pixel_depth > max_pixel_depth) + max_pixel_depth = user_pixel_depth; + } +#endif + + /* This value is stored in png_struct and double checked in the row read + * code. + */ + png_ptr->maximum_pixel_depth = (png_byte)max_pixel_depth; + png_ptr->transformed_pixel_depth = 0; /* calculated on demand */ + + /* Align the width on the next larger 8 pixels. Mainly used + * for interlacing + */ + row_bytes = ((png_ptr->width + 7) & ~((png_uint_32)7)); + /* Calculate the maximum bytes needed, adding a byte and a pixel + * for safety's sake + */ + row_bytes = PNG_ROWBYTES(max_pixel_depth, row_bytes) + + 1 + ((max_pixel_depth + 7) >> 3); + +#ifdef PNG_MAX_MALLOC_64K + if (row_bytes > (png_uint_32)65536L) + png_error(png_ptr, "This image requires a row greater than 64KB"); +#endif + + if (row_bytes + 48 > png_ptr->old_big_row_buf_size) + { + png_free(png_ptr, png_ptr->big_row_buf); + png_free(png_ptr, png_ptr->big_prev_row); + + if (png_ptr->interlaced) + png_ptr->big_row_buf = (png_bytep)png_calloc(png_ptr, + row_bytes + 48); + + else + png_ptr->big_row_buf = (png_bytep)png_malloc(png_ptr, row_bytes + 48); + + png_ptr->big_prev_row = (png_bytep)png_malloc(png_ptr, row_bytes + 48); + +#ifdef PNG_ALIGNED_MEMORY_SUPPORTED + /* Use 16-byte aligned memory for row_buf with at least 16 bytes + * of padding before and after row_buf; treat prev_row similarly. + * NOTE: the alignment is to the start of the pixels, one beyond the start + * of the buffer, because of the filter byte. Prior to libpng 1.5.6 this + * was incorrect; the filter byte was aligned, which had the exact + * opposite effect of that intended. + */ + { + png_bytep temp = png_ptr->big_row_buf + 32; + int extra = (int)((temp - (png_bytep)0) & 0x0f); + png_ptr->row_buf = temp - extra - 1/*filter byte*/; + + temp = png_ptr->big_prev_row + 32; + extra = (int)((temp - (png_bytep)0) & 0x0f); + png_ptr->prev_row = temp - extra - 1/*filter byte*/; + } + +#else + /* Use 31 bytes of padding before and 17 bytes after row_buf. */ + png_ptr->row_buf = png_ptr->big_row_buf + 31; + png_ptr->prev_row = png_ptr->big_prev_row + 31; +#endif + png_ptr->old_big_row_buf_size = row_bytes + 48; + } + +#ifdef PNG_MAX_MALLOC_64K + if (png_ptr->rowbytes > 65535) + png_error(png_ptr, "This image requires a row greater than 64KB"); + +#endif + if (png_ptr->rowbytes > (PNG_SIZE_MAX - 1)) + png_error(png_ptr, "Row has too many bytes to allocate in memory"); + + memset(png_ptr->prev_row, 0, png_ptr->rowbytes + 1); + + png_debug1(3, "width = %u,", png_ptr->width); + png_debug1(3, "height = %u,", png_ptr->height); + png_debug1(3, "iwidth = %u,", png_ptr->iwidth); + png_debug1(3, "num_rows = %u,", png_ptr->num_rows); + png_debug1(3, "rowbytes = %lu,", (unsigned long)png_ptr->rowbytes); + png_debug1(3, "irowbytes = %lu", + (unsigned long)PNG_ROWBYTES(png_ptr->pixel_depth, png_ptr->iwidth) + 1); + + /* The sequential reader needs a buffer for IDAT, but the progressive reader + * does not, so free the read buffer now regardless; the sequential reader + * reallocates it on demand. + */ + if (png_ptr->read_buffer) + { + png_bytep buffer = png_ptr->read_buffer; + + png_ptr->read_buffer_size = 0; + png_ptr->read_buffer = NULL; + png_free(png_ptr, buffer); + } + + /* Finally claim the zstream for the inflate of the IDAT data, use the bits + * value from the stream (note that this will result in a fatal error if the + * IDAT stream has a bogus deflate header window_bits value, but this should + * not be happening any longer!) + */ + if (png_inflate_claim(png_ptr, png_IDAT, 0) != Z_OK) + png_error(png_ptr, png_ptr->zstream.msg); + + png_ptr->flags |= PNG_FLAG_ROW_INIT; +} +#endif /* PNG_READ_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngset.c b/src/SDL2/external/libpng-1.6.2/pngset.c new file mode 100644 index 000000000..fcb077913 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngset.c @@ -0,0 +1,1606 @@ + +/* pngset.c - storage of image information into info struct + * + * Last changed in libpng 1.6.2 [April 25, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * The functions here are used during reads to store data from the file + * into the info struct, and during writes to store application data + * into the info struct for writing into the file. This abstracts the + * info struct and allows us to change the structure in the future. + */ + +#include "pngpriv.h" + +#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) + +#ifdef PNG_bKGD_SUPPORTED +void PNGAPI +png_set_bKGD(png_const_structrp png_ptr, png_inforp info_ptr, + png_const_color_16p background) +{ + png_debug1(1, "in %s storage function", "bKGD"); + + if (png_ptr == NULL || info_ptr == NULL || background == NULL) + return; + + info_ptr->background = *background; + info_ptr->valid |= PNG_INFO_bKGD; +} +#endif + +#ifdef PNG_cHRM_SUPPORTED +void PNGFAPI +png_set_cHRM_fixed(png_const_structrp png_ptr, png_inforp info_ptr, + png_fixed_point white_x, png_fixed_point white_y, png_fixed_point red_x, + png_fixed_point red_y, png_fixed_point green_x, png_fixed_point green_y, + png_fixed_point blue_x, png_fixed_point blue_y) +{ + png_xy xy; + + png_debug1(1, "in %s storage function", "cHRM fixed"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + xy.redx = red_x; + xy.redy = red_y; + xy.greenx = green_x; + xy.greeny = green_y; + xy.bluex = blue_x; + xy.bluey = blue_y; + xy.whitex = white_x; + xy.whitey = white_y; + + if (png_colorspace_set_chromaticities(png_ptr, &info_ptr->colorspace, &xy, + 2/* override with app values*/)) + info_ptr->colorspace.flags |= PNG_COLORSPACE_FROM_cHRM; + + png_colorspace_sync_info(png_ptr, info_ptr); +} + +void PNGFAPI +png_set_cHRM_XYZ_fixed(png_const_structrp png_ptr, png_inforp info_ptr, + png_fixed_point int_red_X, png_fixed_point int_red_Y, + png_fixed_point int_red_Z, png_fixed_point int_green_X, + png_fixed_point int_green_Y, png_fixed_point int_green_Z, + png_fixed_point int_blue_X, png_fixed_point int_blue_Y, + png_fixed_point int_blue_Z) +{ + png_XYZ XYZ; + + png_debug1(1, "in %s storage function", "cHRM XYZ fixed"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + XYZ.red_X = int_red_X; + XYZ.red_Y = int_red_Y; + XYZ.red_Z = int_red_Z; + XYZ.green_X = int_green_X; + XYZ.green_Y = int_green_Y; + XYZ.green_Z = int_green_Z; + XYZ.blue_X = int_blue_X; + XYZ.blue_Y = int_blue_Y; + XYZ.blue_Z = int_blue_Z; + + if (png_colorspace_set_endpoints(png_ptr, &info_ptr->colorspace, &XYZ, 2)) + info_ptr->colorspace.flags |= PNG_COLORSPACE_FROM_cHRM; + + png_colorspace_sync_info(png_ptr, info_ptr); +} + +# ifdef PNG_FLOATING_POINT_SUPPORTED +void PNGAPI +png_set_cHRM(png_const_structrp png_ptr, png_inforp info_ptr, + double white_x, double white_y, double red_x, double red_y, + double green_x, double green_y, double blue_x, double blue_y) +{ + png_set_cHRM_fixed(png_ptr, info_ptr, + png_fixed(png_ptr, white_x, "cHRM White X"), + png_fixed(png_ptr, white_y, "cHRM White Y"), + png_fixed(png_ptr, red_x, "cHRM Red X"), + png_fixed(png_ptr, red_y, "cHRM Red Y"), + png_fixed(png_ptr, green_x, "cHRM Green X"), + png_fixed(png_ptr, green_y, "cHRM Green Y"), + png_fixed(png_ptr, blue_x, "cHRM Blue X"), + png_fixed(png_ptr, blue_y, "cHRM Blue Y")); +} + +void PNGAPI +png_set_cHRM_XYZ(png_const_structrp png_ptr, png_inforp info_ptr, double red_X, + double red_Y, double red_Z, double green_X, double green_Y, double green_Z, + double blue_X, double blue_Y, double blue_Z) +{ + png_set_cHRM_XYZ_fixed(png_ptr, info_ptr, + png_fixed(png_ptr, red_X, "cHRM Red X"), + png_fixed(png_ptr, red_Y, "cHRM Red Y"), + png_fixed(png_ptr, red_Z, "cHRM Red Z"), + png_fixed(png_ptr, green_X, "cHRM Red X"), + png_fixed(png_ptr, green_Y, "cHRM Red Y"), + png_fixed(png_ptr, green_Z, "cHRM Red Z"), + png_fixed(png_ptr, blue_X, "cHRM Red X"), + png_fixed(png_ptr, blue_Y, "cHRM Red Y"), + png_fixed(png_ptr, blue_Z, "cHRM Red Z")); +} +# endif /* PNG_FLOATING_POINT_SUPPORTED */ + +#endif /* PNG_cHRM_SUPPORTED */ + +#ifdef PNG_gAMA_SUPPORTED +void PNGFAPI +png_set_gAMA_fixed(png_const_structrp png_ptr, png_inforp info_ptr, + png_fixed_point file_gamma) +{ + png_debug1(1, "in %s storage function", "gAMA"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + png_colorspace_set_gamma(png_ptr, &info_ptr->colorspace, file_gamma); + png_colorspace_sync_info(png_ptr, info_ptr); +} + +# ifdef PNG_FLOATING_POINT_SUPPORTED +void PNGAPI +png_set_gAMA(png_const_structrp png_ptr, png_inforp info_ptr, double file_gamma) +{ + png_set_gAMA_fixed(png_ptr, info_ptr, png_fixed(png_ptr, file_gamma, + "png_set_gAMA")); +} +# endif +#endif + +#ifdef PNG_hIST_SUPPORTED +void PNGAPI +png_set_hIST(png_const_structrp png_ptr, png_inforp info_ptr, + png_const_uint_16p hist) +{ + int i; + + png_debug1(1, "in %s storage function", "hIST"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + if (info_ptr->num_palette == 0 || info_ptr->num_palette + > PNG_MAX_PALETTE_LENGTH) + { + png_warning(png_ptr, + "Invalid palette size, hIST allocation skipped"); + + return; + } + + png_free_data(png_ptr, info_ptr, PNG_FREE_HIST, 0); + + /* Changed from info->num_palette to PNG_MAX_PALETTE_LENGTH in + * version 1.2.1 + */ + info_ptr->hist = png_voidcast(png_uint_16p, png_malloc_warn(png_ptr, + PNG_MAX_PALETTE_LENGTH * (sizeof (png_uint_16)))); + + if (info_ptr->hist == NULL) + { + png_warning(png_ptr, "Insufficient memory for hIST chunk data"); + return; + } + + info_ptr->free_me |= PNG_FREE_HIST; + + for (i = 0; i < info_ptr->num_palette; i++) + info_ptr->hist[i] = hist[i]; + + info_ptr->valid |= PNG_INFO_hIST; +} +#endif + +void PNGAPI +png_set_IHDR(png_const_structrp png_ptr, png_inforp info_ptr, + png_uint_32 width, png_uint_32 height, int bit_depth, + int color_type, int interlace_type, int compression_type, + int filter_type) +{ + png_debug1(1, "in %s storage function", "IHDR"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + info_ptr->width = width; + info_ptr->height = height; + info_ptr->bit_depth = (png_byte)bit_depth; + info_ptr->color_type = (png_byte)color_type; + info_ptr->compression_type = (png_byte)compression_type; + info_ptr->filter_type = (png_byte)filter_type; + info_ptr->interlace_type = (png_byte)interlace_type; + + png_check_IHDR (png_ptr, info_ptr->width, info_ptr->height, + info_ptr->bit_depth, info_ptr->color_type, info_ptr->interlace_type, + info_ptr->compression_type, info_ptr->filter_type); + + if (info_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + info_ptr->channels = 1; + + else if (info_ptr->color_type & PNG_COLOR_MASK_COLOR) + info_ptr->channels = 3; + + else + info_ptr->channels = 1; + + if (info_ptr->color_type & PNG_COLOR_MASK_ALPHA) + info_ptr->channels++; + + info_ptr->pixel_depth = (png_byte)(info_ptr->channels * info_ptr->bit_depth); + + /* Check for potential overflow */ + if (width > + (PNG_UINT_32_MAX >> 3) /* 8-byte RRGGBBAA pixels */ + - 48 /* bigrowbuf hack */ + - 1 /* filter byte */ + - 7*8 /* rounding of width to multiple of 8 pixels */ + - 8) /* extra max_pixel_depth pad */ + info_ptr->rowbytes = 0; + else + info_ptr->rowbytes = PNG_ROWBYTES(info_ptr->pixel_depth, width); +} + +#ifdef PNG_oFFs_SUPPORTED +void PNGAPI +png_set_oFFs(png_const_structrp png_ptr, png_inforp info_ptr, + png_int_32 offset_x, png_int_32 offset_y, int unit_type) +{ + png_debug1(1, "in %s storage function", "oFFs"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + info_ptr->x_offset = offset_x; + info_ptr->y_offset = offset_y; + info_ptr->offset_unit_type = (png_byte)unit_type; + info_ptr->valid |= PNG_INFO_oFFs; +} +#endif + +#ifdef PNG_pCAL_SUPPORTED +void PNGAPI +png_set_pCAL(png_const_structrp png_ptr, png_inforp info_ptr, + png_const_charp purpose, png_int_32 X0, png_int_32 X1, int type, + int nparams, png_const_charp units, png_charpp params) +{ + png_size_t length; + int i; + + png_debug1(1, "in %s storage function", "pCAL"); + + if (png_ptr == NULL || info_ptr == NULL || purpose == NULL || units == NULL + || (nparams > 0 && params == NULL)) + return; + + length = strlen(purpose) + 1; + png_debug1(3, "allocating purpose for info (%lu bytes)", + (unsigned long)length); + + /* TODO: validate format of calibration name and unit name */ + + /* Check that the type matches the specification. */ + if (type < 0 || type > 3) + png_error(png_ptr, "Invalid pCAL equation type"); + + if (nparams < 0 || nparams > 255) + png_error(png_ptr, "Invalid pCAL parameter count"); + + /* Validate params[nparams] */ + for (i=0; ipcal_purpose = png_voidcast(png_charp, + png_malloc_warn(png_ptr, length)); + + if (info_ptr->pcal_purpose == NULL) + { + png_warning(png_ptr, "Insufficient memory for pCAL purpose"); + return; + } + + memcpy(info_ptr->pcal_purpose, purpose, length); + + png_debug(3, "storing X0, X1, type, and nparams in info"); + info_ptr->pcal_X0 = X0; + info_ptr->pcal_X1 = X1; + info_ptr->pcal_type = (png_byte)type; + info_ptr->pcal_nparams = (png_byte)nparams; + + length = strlen(units) + 1; + png_debug1(3, "allocating units for info (%lu bytes)", + (unsigned long)length); + + info_ptr->pcal_units = png_voidcast(png_charp, + png_malloc_warn(png_ptr, length)); + + if (info_ptr->pcal_units == NULL) + { + png_warning(png_ptr, "Insufficient memory for pCAL units"); + return; + } + + memcpy(info_ptr->pcal_units, units, length); + + info_ptr->pcal_params = png_voidcast(png_charpp, png_malloc_warn(png_ptr, + (png_size_t)((nparams + 1) * (sizeof (png_charp))))); + + if (info_ptr->pcal_params == NULL) + { + png_warning(png_ptr, "Insufficient memory for pCAL params"); + return; + } + + memset(info_ptr->pcal_params, 0, (nparams + 1) * (sizeof (png_charp))); + + for (i = 0; i < nparams; i++) + { + length = strlen(params[i]) + 1; + png_debug2(3, "allocating parameter %d for info (%lu bytes)", i, + (unsigned long)length); + + info_ptr->pcal_params[i] = (png_charp)png_malloc_warn(png_ptr, length); + + if (info_ptr->pcal_params[i] == NULL) + { + png_warning(png_ptr, "Insufficient memory for pCAL parameter"); + return; + } + + memcpy(info_ptr->pcal_params[i], params[i], length); + } + + info_ptr->valid |= PNG_INFO_pCAL; + info_ptr->free_me |= PNG_FREE_PCAL; +} +#endif + +#ifdef PNG_sCAL_SUPPORTED +void PNGAPI +png_set_sCAL_s(png_const_structrp png_ptr, png_inforp info_ptr, + int unit, png_const_charp swidth, png_const_charp sheight) +{ + png_size_t lengthw = 0, lengthh = 0; + + png_debug1(1, "in %s storage function", "sCAL"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + /* Double check the unit (should never get here with an invalid + * unit unless this is an API call.) + */ + if (unit != 1 && unit != 2) + png_error(png_ptr, "Invalid sCAL unit"); + + if (swidth == NULL || (lengthw = strlen(swidth)) == 0 || + swidth[0] == 45 /* '-' */ || !png_check_fp_string(swidth, lengthw)) + png_error(png_ptr, "Invalid sCAL width"); + + if (sheight == NULL || (lengthh = strlen(sheight)) == 0 || + sheight[0] == 45 /* '-' */ || !png_check_fp_string(sheight, lengthh)) + png_error(png_ptr, "Invalid sCAL height"); + + info_ptr->scal_unit = (png_byte)unit; + + ++lengthw; + + png_debug1(3, "allocating unit for info (%u bytes)", (unsigned int)lengthw); + + info_ptr->scal_s_width = png_voidcast(png_charp, + png_malloc_warn(png_ptr, lengthw)); + + if (info_ptr->scal_s_width == NULL) + { + png_warning(png_ptr, "Memory allocation failed while processing sCAL"); + return; + } + + memcpy(info_ptr->scal_s_width, swidth, lengthw); + + ++lengthh; + + png_debug1(3, "allocating unit for info (%u bytes)", (unsigned int)lengthh); + + info_ptr->scal_s_height = png_voidcast(png_charp, + png_malloc_warn(png_ptr, lengthh)); + + if (info_ptr->scal_s_height == NULL) + { + png_free (png_ptr, info_ptr->scal_s_width); + info_ptr->scal_s_width = NULL; + + png_warning(png_ptr, "Memory allocation failed while processing sCAL"); + return; + } + + memcpy(info_ptr->scal_s_height, sheight, lengthh); + + info_ptr->valid |= PNG_INFO_sCAL; + info_ptr->free_me |= PNG_FREE_SCAL; +} + +# ifdef PNG_FLOATING_POINT_SUPPORTED +void PNGAPI +png_set_sCAL(png_const_structrp png_ptr, png_inforp info_ptr, int unit, + double width, double height) +{ + png_debug1(1, "in %s storage function", "sCAL"); + + /* Check the arguments. */ + if (width <= 0) + png_warning(png_ptr, "Invalid sCAL width ignored"); + + else if (height <= 0) + png_warning(png_ptr, "Invalid sCAL height ignored"); + + else + { + /* Convert 'width' and 'height' to ASCII. */ + char swidth[PNG_sCAL_MAX_DIGITS+1]; + char sheight[PNG_sCAL_MAX_DIGITS+1]; + + png_ascii_from_fp(png_ptr, swidth, (sizeof swidth), width, + PNG_sCAL_PRECISION); + png_ascii_from_fp(png_ptr, sheight, (sizeof sheight), height, + PNG_sCAL_PRECISION); + + png_set_sCAL_s(png_ptr, info_ptr, unit, swidth, sheight); + } +} +# endif + +# ifdef PNG_FIXED_POINT_SUPPORTED +void PNGAPI +png_set_sCAL_fixed(png_const_structrp png_ptr, png_inforp info_ptr, int unit, + png_fixed_point width, png_fixed_point height) +{ + png_debug1(1, "in %s storage function", "sCAL"); + + /* Check the arguments. */ + if (width <= 0) + png_warning(png_ptr, "Invalid sCAL width ignored"); + + else if (height <= 0) + png_warning(png_ptr, "Invalid sCAL height ignored"); + + else + { + /* Convert 'width' and 'height' to ASCII. */ + char swidth[PNG_sCAL_MAX_DIGITS+1]; + char sheight[PNG_sCAL_MAX_DIGITS+1]; + + png_ascii_from_fixed(png_ptr, swidth, (sizeof swidth), width); + png_ascii_from_fixed(png_ptr, sheight, (sizeof sheight), height); + + png_set_sCAL_s(png_ptr, info_ptr, unit, swidth, sheight); + } +} +# endif +#endif + +#ifdef PNG_pHYs_SUPPORTED +void PNGAPI +png_set_pHYs(png_const_structrp png_ptr, png_inforp info_ptr, + png_uint_32 res_x, png_uint_32 res_y, int unit_type) +{ + png_debug1(1, "in %s storage function", "pHYs"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + info_ptr->x_pixels_per_unit = res_x; + info_ptr->y_pixels_per_unit = res_y; + info_ptr->phys_unit_type = (png_byte)unit_type; + info_ptr->valid |= PNG_INFO_pHYs; +} +#endif + +void PNGAPI +png_set_PLTE(png_structrp png_ptr, png_inforp info_ptr, + png_const_colorp palette, int num_palette) +{ + + png_debug1(1, "in %s storage function", "PLTE"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + if (num_palette < 0 || num_palette > PNG_MAX_PALETTE_LENGTH) + { + if (info_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + png_error(png_ptr, "Invalid palette length"); + + else + { + png_warning(png_ptr, "Invalid palette length"); + return; + } + } + + if ((num_palette > 0 && palette == NULL) || + (num_palette == 0 +# ifdef PNG_MNG_FEATURES_SUPPORTED + && (png_ptr->mng_features_permitted & PNG_FLAG_MNG_EMPTY_PLTE) == 0 +# endif + )) + { + png_chunk_report(png_ptr, "Invalid palette", PNG_CHUNK_ERROR); + return; + } + + /* It may not actually be necessary to set png_ptr->palette here; + * we do it for backward compatibility with the way the png_handle_tRNS + * function used to do the allocation. + * + * 1.6.0: the above statement appears to be incorrect; something has to set + * the palette inside png_struct on read. + */ + png_free_data(png_ptr, info_ptr, PNG_FREE_PLTE, 0); + + /* Changed in libpng-1.2.1 to allocate PNG_MAX_PALETTE_LENGTH instead + * of num_palette entries, in case of an invalid PNG file that has + * too-large sample values. + */ + png_ptr->palette = png_voidcast(png_colorp, png_calloc(png_ptr, + PNG_MAX_PALETTE_LENGTH * (sizeof (png_color)))); + + if (num_palette > 0) + memcpy(png_ptr->palette, palette, num_palette * (sizeof (png_color))); + info_ptr->palette = png_ptr->palette; + info_ptr->num_palette = png_ptr->num_palette = (png_uint_16)num_palette; + + info_ptr->free_me |= PNG_FREE_PLTE; + + info_ptr->valid |= PNG_INFO_PLTE; +} + +#ifdef PNG_sBIT_SUPPORTED +void PNGAPI +png_set_sBIT(png_const_structrp png_ptr, png_inforp info_ptr, + png_const_color_8p sig_bit) +{ + png_debug1(1, "in %s storage function", "sBIT"); + + if (png_ptr == NULL || info_ptr == NULL || sig_bit == NULL) + return; + + info_ptr->sig_bit = *sig_bit; + info_ptr->valid |= PNG_INFO_sBIT; +} +#endif + +#ifdef PNG_sRGB_SUPPORTED +void PNGAPI +png_set_sRGB(png_const_structrp png_ptr, png_inforp info_ptr, int srgb_intent) +{ + png_debug1(1, "in %s storage function", "sRGB"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + (void)png_colorspace_set_sRGB(png_ptr, &info_ptr->colorspace, srgb_intent); + png_colorspace_sync_info(png_ptr, info_ptr); +} + +void PNGAPI +png_set_sRGB_gAMA_and_cHRM(png_const_structrp png_ptr, png_inforp info_ptr, + int srgb_intent) +{ + png_debug1(1, "in %s storage function", "sRGB_gAMA_and_cHRM"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + if (png_colorspace_set_sRGB(png_ptr, &info_ptr->colorspace, srgb_intent)) + { + /* This causes the gAMA and cHRM to be written too */ + info_ptr->colorspace.flags |= + PNG_COLORSPACE_FROM_gAMA|PNG_COLORSPACE_FROM_cHRM; + } + + png_colorspace_sync_info(png_ptr, info_ptr); +} +#endif /* sRGB */ + + +#ifdef PNG_iCCP_SUPPORTED +void PNGAPI +png_set_iCCP(png_const_structrp png_ptr, png_inforp info_ptr, + png_const_charp name, int compression_type, + png_const_bytep profile, png_uint_32 proflen) +{ + png_charp new_iccp_name; + png_bytep new_iccp_profile; + png_size_t length; + + png_debug1(1, "in %s storage function", "iCCP"); + + if (png_ptr == NULL || info_ptr == NULL || name == NULL || profile == NULL) + return; + + if (compression_type != PNG_COMPRESSION_TYPE_BASE) + png_app_error(png_ptr, "Invalid iCCP compression method"); + + /* Set the colorspace first because this validates the profile; do not + * override previously set app cHRM or gAMA here (because likely as not the + * application knows better than libpng what the correct values are.) Pass + * the info_ptr color_type field to png_colorspace_set_ICC because in the + * write case it has not yet been stored in png_ptr. + */ + { + int result = png_colorspace_set_ICC(png_ptr, &info_ptr->colorspace, name, + proflen, profile, info_ptr->color_type); + + png_colorspace_sync_info(png_ptr, info_ptr); + + /* Don't do any of the copying if the profile was bad, or inconsistent. */ + if (!result) + return; + + /* But do write the gAMA and cHRM chunks from the profile. */ + info_ptr->colorspace.flags |= + PNG_COLORSPACE_FROM_gAMA|PNG_COLORSPACE_FROM_cHRM; + } + + length = strlen(name)+1; + new_iccp_name = png_voidcast(png_charp, png_malloc_warn(png_ptr, length)); + + if (new_iccp_name == NULL) + { + png_benign_error(png_ptr, "Insufficient memory to process iCCP chunk"); + return; + } + + memcpy(new_iccp_name, name, length); + new_iccp_profile = png_voidcast(png_bytep, + png_malloc_warn(png_ptr, proflen)); + + if (new_iccp_profile == NULL) + { + png_free(png_ptr, new_iccp_name); + png_benign_error(png_ptr, + "Insufficient memory to process iCCP profile"); + return; + } + + memcpy(new_iccp_profile, profile, proflen); + + png_free_data(png_ptr, info_ptr, PNG_FREE_ICCP, 0); + + info_ptr->iccp_proflen = proflen; + info_ptr->iccp_name = new_iccp_name; + info_ptr->iccp_profile = new_iccp_profile; + info_ptr->free_me |= PNG_FREE_ICCP; + info_ptr->valid |= PNG_INFO_iCCP; +} +#endif + +#ifdef PNG_TEXT_SUPPORTED +void PNGAPI +png_set_text(png_const_structrp png_ptr, png_inforp info_ptr, + png_const_textp text_ptr, int num_text) +{ + int ret; + ret = png_set_text_2(png_ptr, info_ptr, text_ptr, num_text); + + if (ret) + png_error(png_ptr, "Insufficient memory to store text"); +} + +int /* PRIVATE */ +png_set_text_2(png_const_structrp png_ptr, png_inforp info_ptr, + png_const_textp text_ptr, int num_text) +{ + int i; + + png_debug1(1, "in %lx storage function", png_ptr == NULL ? "unexpected" : + (unsigned long)png_ptr->chunk_name); + + if (png_ptr == NULL || info_ptr == NULL || num_text <= 0 || text_ptr == NULL) + return(0); + + /* Make sure we have enough space in the "text" array in info_struct + * to hold all of the incoming text_ptr objects. This compare can't overflow + * because max_text >= num_text (anyway, subtract of two positive integers + * can't overflow in any case.) + */ + if (num_text > info_ptr->max_text - info_ptr->num_text) + { + int old_num_text = info_ptr->num_text; + int max_text; + png_textp new_text = NULL; + + /* Calculate an appropriate max_text, checking for overflow. */ + max_text = old_num_text; + if (num_text <= INT_MAX - max_text) + { + max_text += num_text; + + /* Round up to a multiple of 8 */ + if (max_text < INT_MAX-8) + max_text = (max_text + 8) & ~0x7; + + else + max_text = INT_MAX; + + /* Now allocate a new array and copy the old members in, this does all + * the overflow checks. + */ + new_text = png_voidcast(png_textp,png_realloc_array(png_ptr, + info_ptr->text, old_num_text, max_text-old_num_text, + sizeof *new_text)); + } + + if (new_text == NULL) + { + png_chunk_report(png_ptr, "too many text chunks", + PNG_CHUNK_WRITE_ERROR); + return 1; + } + + png_free(png_ptr, info_ptr->text); + + info_ptr->text = new_text; + info_ptr->free_me |= PNG_FREE_TEXT; + info_ptr->max_text = max_text; + /* num_text is adjusted below as the entries are copied in */ + + png_debug1(3, "allocated %d entries for info_ptr->text", max_text); + } + + for (i = 0; i < num_text; i++) + { + size_t text_length, key_len; + size_t lang_len, lang_key_len; + png_textp textp = &(info_ptr->text[info_ptr->num_text]); + + if (text_ptr[i].key == NULL) + continue; + + if (text_ptr[i].compression < PNG_TEXT_COMPRESSION_NONE || + text_ptr[i].compression >= PNG_TEXT_COMPRESSION_LAST) + { + png_chunk_report(png_ptr, "text compression mode is out of range", + PNG_CHUNK_WRITE_ERROR); + continue; + } + + key_len = strlen(text_ptr[i].key); + + if (text_ptr[i].compression <= 0) + { + lang_len = 0; + lang_key_len = 0; + } + + else +# ifdef PNG_iTXt_SUPPORTED + { + /* Set iTXt data */ + + if (text_ptr[i].lang != NULL) + lang_len = strlen(text_ptr[i].lang); + + else + lang_len = 0; + + if (text_ptr[i].lang_key != NULL) + lang_key_len = strlen(text_ptr[i].lang_key); + + else + lang_key_len = 0; + } +# else /* PNG_iTXt_SUPPORTED */ + { + png_chunk_report(png_ptr, "iTXt chunk not supported", + PNG_CHUNK_WRITE_ERROR); + continue; + } +# endif + + if (text_ptr[i].text == NULL || text_ptr[i].text[0] == '\0') + { + text_length = 0; +# ifdef PNG_iTXt_SUPPORTED + if (text_ptr[i].compression > 0) + textp->compression = PNG_ITXT_COMPRESSION_NONE; + + else +# endif + textp->compression = PNG_TEXT_COMPRESSION_NONE; + } + + else + { + text_length = strlen(text_ptr[i].text); + textp->compression = text_ptr[i].compression; + } + + textp->key = png_voidcast(png_charp,png_malloc_base(png_ptr, + key_len + text_length + lang_len + lang_key_len + 4)); + + if (textp->key == NULL) + { + png_chunk_report(png_ptr, "text chunk: out of memory", + PNG_CHUNK_WRITE_ERROR); + return 1; + } + + png_debug2(2, "Allocated %lu bytes at %p in png_set_text", + (unsigned long)(png_uint_32) + (key_len + lang_len + lang_key_len + text_length + 4), + textp->key); + + memcpy(textp->key, text_ptr[i].key, key_len); + *(textp->key + key_len) = '\0'; + + if (text_ptr[i].compression > 0) + { + textp->lang = textp->key + key_len + 1; + memcpy(textp->lang, text_ptr[i].lang, lang_len); + *(textp->lang + lang_len) = '\0'; + textp->lang_key = textp->lang + lang_len + 1; + memcpy(textp->lang_key, text_ptr[i].lang_key, lang_key_len); + *(textp->lang_key + lang_key_len) = '\0'; + textp->text = textp->lang_key + lang_key_len + 1; + } + + else + { + textp->lang=NULL; + textp->lang_key=NULL; + textp->text = textp->key + key_len + 1; + } + + if (text_length) + memcpy(textp->text, text_ptr[i].text, text_length); + + *(textp->text + text_length) = '\0'; + +# ifdef PNG_iTXt_SUPPORTED + if (textp->compression > 0) + { + textp->text_length = 0; + textp->itxt_length = text_length; + } + + else +# endif + { + textp->text_length = text_length; + textp->itxt_length = 0; + } + + info_ptr->num_text++; + png_debug1(3, "transferred text chunk %d", info_ptr->num_text); + } + + return(0); +} +#endif + +#ifdef PNG_tIME_SUPPORTED +void PNGAPI +png_set_tIME(png_const_structrp png_ptr, png_inforp info_ptr, + png_const_timep mod_time) +{ + png_debug1(1, "in %s storage function", "tIME"); + + if (png_ptr == NULL || info_ptr == NULL || mod_time == NULL || + (png_ptr->mode & PNG_WROTE_tIME)) + return; + + if (mod_time->month == 0 || mod_time->month > 12 || + mod_time->day == 0 || mod_time->day > 31 || + mod_time->hour > 23 || mod_time->minute > 59 || + mod_time->second > 60) + { + png_warning(png_ptr, "Ignoring invalid time value"); + return; + } + + info_ptr->mod_time = *mod_time; + info_ptr->valid |= PNG_INFO_tIME; +} +#endif + +#ifdef PNG_tRNS_SUPPORTED +void PNGAPI +png_set_tRNS(png_structrp png_ptr, png_inforp info_ptr, + png_const_bytep trans_alpha, int num_trans, png_const_color_16p trans_color) +{ + png_debug1(1, "in %s storage function", "tRNS"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + if (trans_alpha != NULL) + { + /* It may not actually be necessary to set png_ptr->trans_alpha here; + * we do it for backward compatibility with the way the png_handle_tRNS + * function used to do the allocation. + * + * 1.6.0: The above statement is incorrect; png_handle_tRNS effectively + * relies on png_set_tRNS storing the information in png_struct + * (otherwise it won't be there for the code in pngrtran.c). + */ + + png_free_data(png_ptr, info_ptr, PNG_FREE_TRNS, 0); + + /* Changed from num_trans to PNG_MAX_PALETTE_LENGTH in version 1.2.1 */ + png_ptr->trans_alpha = info_ptr->trans_alpha = png_voidcast(png_bytep, + png_malloc(png_ptr, PNG_MAX_PALETTE_LENGTH)); + + if (num_trans > 0 && num_trans <= PNG_MAX_PALETTE_LENGTH) + memcpy(info_ptr->trans_alpha, trans_alpha, (png_size_t)num_trans); + } + + if (trans_color != NULL) + { + int sample_max = (1 << info_ptr->bit_depth); + + if ((info_ptr->color_type == PNG_COLOR_TYPE_GRAY && + trans_color->gray > sample_max) || + (info_ptr->color_type == PNG_COLOR_TYPE_RGB && + (trans_color->red > sample_max || + trans_color->green > sample_max || + trans_color->blue > sample_max))) + png_warning(png_ptr, + "tRNS chunk has out-of-range samples for bit_depth"); + + info_ptr->trans_color = *trans_color; + + if (num_trans == 0) + num_trans = 1; + } + + info_ptr->num_trans = (png_uint_16)num_trans; + + if (num_trans != 0) + { + info_ptr->valid |= PNG_INFO_tRNS; + info_ptr->free_me |= PNG_FREE_TRNS; + } +} +#endif + +#ifdef PNG_sPLT_SUPPORTED +void PNGAPI +png_set_sPLT(png_const_structrp png_ptr, + png_inforp info_ptr, png_const_sPLT_tp entries, int nentries) +/* + * entries - array of png_sPLT_t structures + * to be added to the list of palettes + * in the info structure. + * + * nentries - number of palette structures to be + * added. + */ +{ + png_sPLT_tp np; + + if (png_ptr == NULL || info_ptr == NULL || nentries <= 0 || entries == NULL) + return; + + /* Use the internal realloc function, which checks for all the possible + * overflows. Notice that the parameters are (int) and (size_t) + */ + np = png_voidcast(png_sPLT_tp,png_realloc_array(png_ptr, + info_ptr->splt_palettes, info_ptr->splt_palettes_num, nentries, + sizeof *np)); + + if (np == NULL) + { + /* Out of memory or too many chunks */ + png_chunk_report(png_ptr, "too many sPLT chunks", PNG_CHUNK_WRITE_ERROR); + return; + } + + png_free(png_ptr, info_ptr->splt_palettes); + info_ptr->splt_palettes = np; + info_ptr->free_me |= PNG_FREE_SPLT; + + np += info_ptr->splt_palettes_num; + + do + { + png_size_t length; + + /* Skip invalid input entries */ + if (entries->name == NULL || entries->entries == NULL) + { + /* png_handle_sPLT doesn't do this, so this is an app error */ + png_app_error(png_ptr, "png_set_sPLT: invalid sPLT"); + /* Just skip the invalid entry */ + continue; + } + + np->depth = entries->depth; + + /* In the even of out-of-memory just return - there's no point keeping on + * trying to add sPLT chunks. + */ + length = strlen(entries->name) + 1; + np->name = png_voidcast(png_charp, png_malloc_base(png_ptr, length)); + + if (np->name == NULL) + break; + + memcpy(np->name, entries->name, length); + + /* IMPORTANT: we have memory now that won't get freed if something else + * goes wrong, this code must free it. png_malloc_array produces no + * warnings, use a png_chunk_report (below) if there is an error. + */ + np->entries = png_voidcast(png_sPLT_entryp, png_malloc_array(png_ptr, + entries->nentries, sizeof (png_sPLT_entry))); + + if (np->entries == NULL) + { + png_free(png_ptr, np->name); + break; + } + + np->nentries = entries->nentries; + /* This multiply can't overflow because png_malloc_array has already + * checked it when doing the allocation. + */ + memcpy(np->entries, entries->entries, + entries->nentries * sizeof (png_sPLT_entry)); + + /* Note that 'continue' skips the advance of the out pointer and out + * count, so an invalid entry is not added. + */ + info_ptr->valid |= PNG_INFO_sPLT; + ++(info_ptr->splt_palettes_num); + ++np; + } + while (++entries, --nentries); + + if (nentries > 0) + png_chunk_report(png_ptr, "sPLT out of memory", PNG_CHUNK_WRITE_ERROR); +} +#endif /* PNG_sPLT_SUPPORTED */ + +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +static png_byte +check_location(png_const_structrp png_ptr, int location) +{ + location &= (PNG_HAVE_IHDR|PNG_HAVE_PLTE|PNG_AFTER_IDAT); + + /* New in 1.6.0; copy the location and check it. This is an API + * change, previously the app had to use the + * png_set_unknown_chunk_location API below for each chunk. + */ + if (location == 0 && !(png_ptr->mode & PNG_IS_READ_STRUCT)) + { + /* Write struct, so unknown chunks come from the app */ + png_app_warning(png_ptr, + "png_set_unknown_chunks now expects a valid location"); + /* Use the old behavior */ + location = (png_byte)(png_ptr->mode & + (PNG_HAVE_IHDR|PNG_HAVE_PLTE|PNG_AFTER_IDAT)); + } + + /* This need not be an internal error - if the app calls + * png_set_unknown_chunks on a read pointer it must get the location right. + */ + if (location == 0) + png_error(png_ptr, "invalid location in png_set_unknown_chunks"); + + /* Now reduce the location to the top-most set bit by removing each least + * significant bit in turn. + */ + while (location != (location & -location)) + location &= ~(location & -location); + + /* The cast is safe because 'location' is a bit mask and only the low four + * bits are significant. + */ + return (png_byte)location; +} + +void PNGAPI +png_set_unknown_chunks(png_const_structrp png_ptr, + png_inforp info_ptr, png_const_unknown_chunkp unknowns, int num_unknowns) +{ + png_unknown_chunkp np; + + if (png_ptr == NULL || info_ptr == NULL || num_unknowns <= 0 || + unknowns == NULL) + return; + + /* Check for the failure cases where support has been disabled at compile + * time. This code is hardly ever compiled - it's here because + * STORE_UNKNOWN_CHUNKS is set by both read and write code (compiling in this + * code) but may be meaningless if the read or write handling of unknown + * chunks is not compiled in. + */ +# if !defined(PNG_READ_UNKNOWN_CHUNKS_SUPPORTED) && \ + defined(PNG_READ_SUPPORTED) + if (png_ptr->mode & PNG_IS_READ_STRUCT) + { + png_app_error(png_ptr, "no unknown chunk support on read"); + return; + } +# endif +# if !defined(PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED) && \ + defined(PNG_WRITE_SUPPORTED) + if (!(png_ptr->mode & PNG_IS_READ_STRUCT)) + { + png_app_error(png_ptr, "no unknown chunk support on write"); + return; + } +# endif + + /* Prior to 1.6.0 this code used png_malloc_warn; however, this meant that + * unknown critical chunks could be lost with just a warning resulting in + * undefined behavior. Now png_chunk_report is used to provide behavior + * appropriate to read or write. + */ + np = png_voidcast(png_unknown_chunkp, png_realloc_array(png_ptr, + info_ptr->unknown_chunks, info_ptr->unknown_chunks_num, num_unknowns, + sizeof *np)); + + if (np == NULL) + { + png_chunk_report(png_ptr, "too many unknown chunks", + PNG_CHUNK_WRITE_ERROR); + return; + } + + png_free(png_ptr, info_ptr->unknown_chunks); + info_ptr->unknown_chunks = np; /* safe because it is initialized */ + info_ptr->free_me |= PNG_FREE_UNKN; + + np += info_ptr->unknown_chunks_num; + + /* Increment unknown_chunks_num each time round the loop to protect the + * just-allocated chunk data. + */ + for (; num_unknowns > 0; --num_unknowns, ++unknowns) + { + memcpy(np->name, unknowns->name, (sizeof np->name)); + np->name[(sizeof np->name)-1] = '\0'; + np->location = check_location(png_ptr, unknowns->location); + + if (unknowns->size == 0) + { + np->data = NULL; + np->size = 0; + } + + else + { + np->data = png_voidcast(png_bytep, + png_malloc_base(png_ptr, unknowns->size)); + + if (np->data == NULL) + { + png_chunk_report(png_ptr, "unknown chunk: out of memory", + PNG_CHUNK_WRITE_ERROR); + /* But just skip storing the unknown chunk */ + continue; + } + + memcpy(np->data, unknowns->data, unknowns->size); + np->size = unknowns->size; + } + + /* These increments are skipped on out-of-memory for the data - the + * unknown chunk entry gets overwritten if the png_chunk_report returns. + * This is correct in the read case (the chunk is just dropped.) + */ + ++np; + ++(info_ptr->unknown_chunks_num); + } +} + +void PNGAPI +png_set_unknown_chunk_location(png_const_structrp png_ptr, png_inforp info_ptr, + int chunk, int location) +{ + /* This API is pretty pointless in 1.6.0 because the location can be set + * before the call to png_set_unknown_chunks. + * + * TODO: add a png_app_warning in 1.7 + */ + if (png_ptr != NULL && info_ptr != NULL && chunk >= 0 && + chunk < info_ptr->unknown_chunks_num) + { + if ((location & (PNG_HAVE_IHDR|PNG_HAVE_PLTE|PNG_AFTER_IDAT)) == 0) + { + png_app_error(png_ptr, "invalid unknown chunk location"); + /* Fake out the pre 1.6.0 behavior: */ + if ((location & PNG_HAVE_IDAT)) /* undocumented! */ + location = PNG_AFTER_IDAT; + + else + location = PNG_HAVE_IHDR; /* also undocumented */ + } + + info_ptr->unknown_chunks[chunk].location = + check_location(png_ptr, location); + } +} +#endif + + +#ifdef PNG_MNG_FEATURES_SUPPORTED +png_uint_32 PNGAPI +png_permit_mng_features (png_structrp png_ptr, png_uint_32 mng_features) +{ + png_debug(1, "in png_permit_mng_features"); + + if (png_ptr == NULL) + return 0; + + png_ptr->mng_features_permitted = mng_features & PNG_ALL_MNG_FEATURES; + + return png_ptr->mng_features_permitted; +} +#endif + +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED +static unsigned int +add_one_chunk(png_bytep list, unsigned int count, png_const_bytep add, int keep) +{ + unsigned int i; + + /* Utility function: update the 'keep' state of a chunk if it is already in + * the list, otherwise add it to the list. + */ + for (i=0; i= PNG_HANDLE_CHUNK_LAST) + { + png_app_error(png_ptr, "png_set_keep_unknown_chunks: invalid keep"); + return; + } + + if (num_chunks_in <= 0) + { + png_ptr->unknown_default = keep; + + /* '0' means just set the flags, so stop here */ + if (num_chunks_in == 0) + return; + } + + if (num_chunks_in < 0) + { + /* Ignore all unknown chunks and all chunks recognized by + * libpng except for IHDR, PLTE, tRNS, IDAT, and IEND + */ + static PNG_CONST png_byte chunks_to_ignore[] = { + 98, 75, 71, 68, '\0', /* bKGD */ + 99, 72, 82, 77, '\0', /* cHRM */ + 103, 65, 77, 65, '\0', /* gAMA */ + 104, 73, 83, 84, '\0', /* hIST */ + 105, 67, 67, 80, '\0', /* iCCP */ + 105, 84, 88, 116, '\0', /* iTXt */ + 111, 70, 70, 115, '\0', /* oFFs */ + 112, 67, 65, 76, '\0', /* pCAL */ + 112, 72, 89, 115, '\0', /* pHYs */ + 115, 66, 73, 84, '\0', /* sBIT */ + 115, 67, 65, 76, '\0', /* sCAL */ + 115, 80, 76, 84, '\0', /* sPLT */ + 115, 84, 69, 82, '\0', /* sTER */ + 115, 82, 71, 66, '\0', /* sRGB */ + 116, 69, 88, 116, '\0', /* tEXt */ + 116, 73, 77, 69, '\0', /* tIME */ + 122, 84, 88, 116, '\0' /* zTXt */ + }; + + chunk_list = chunks_to_ignore; + num_chunks = (sizeof chunks_to_ignore)/5; + } + + else /* num_chunks_in > 0 */ + { + if (chunk_list == NULL) + { + /* Prior to 1.6.0 this was silently ignored, now it is an app_error + * which can be switched off. + */ + png_app_error(png_ptr, "png_set_keep_unknown_chunks: no chunk list"); + return; + } + + num_chunks = num_chunks_in; + } + + old_num_chunks = png_ptr->num_chunk_list; + if (png_ptr->chunk_list == NULL) + old_num_chunks = 0; + + /* Since num_chunks is always restricted to UINT_MAX/5 this can't overflow. + */ + if (num_chunks + old_num_chunks > UINT_MAX/5) + { + png_app_error(png_ptr, "png_set_keep_unknown_chunks: too many chunks"); + return; + } + + /* If these chunks are being reset to the default then no more memory is + * required because add_one_chunk above doesn't extend the list if the 'keep' + * parameter is the default. + */ + if (keep) + { + new_list = png_voidcast(png_bytep, png_malloc(png_ptr, + 5 * (num_chunks + old_num_chunks))); + + if (old_num_chunks > 0) + memcpy(new_list, png_ptr->chunk_list, 5*old_num_chunks); + } + + else if (old_num_chunks > 0) + new_list = png_ptr->chunk_list; + + else + new_list = NULL; + + /* Add the new chunks together with each one's handling code. If the chunk + * already exists the code is updated, otherwise the chunk is added to the + * end. (In libpng 1.6.0 order no longer matters because this code enforces + * the earlier convention that the last setting is the one that is used.) + */ + if (new_list != NULL) + { + png_const_bytep inlist; + png_bytep outlist; + unsigned int i; + + for (i=0; ichunk_list != new_list) + png_free(png_ptr, new_list); + + new_list = NULL; + } + } + + else + num_chunks = 0; + + png_ptr->num_chunk_list = num_chunks; + + if (png_ptr->chunk_list != new_list) + { + if (png_ptr->chunk_list != NULL) + png_free(png_ptr, png_ptr->chunk_list); + + png_ptr->chunk_list = new_list; + } +} +#endif + +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED +void PNGAPI +png_set_read_user_chunk_fn(png_structrp png_ptr, png_voidp user_chunk_ptr, + png_user_chunk_ptr read_user_chunk_fn) +{ + png_debug(1, "in png_set_read_user_chunk_fn"); + + if (png_ptr == NULL) + return; + + png_ptr->read_user_chunk_fn = read_user_chunk_fn; + png_ptr->user_chunk_ptr = user_chunk_ptr; +} +#endif + +#ifdef PNG_INFO_IMAGE_SUPPORTED +void PNGAPI +png_set_rows(png_const_structrp png_ptr, png_inforp info_ptr, + png_bytepp row_pointers) +{ + png_debug1(1, "in %s storage function", "rows"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + if (info_ptr->row_pointers && (info_ptr->row_pointers != row_pointers)) + png_free_data(png_ptr, info_ptr, PNG_FREE_ROWS, 0); + + info_ptr->row_pointers = row_pointers; + + if (row_pointers) + info_ptr->valid |= PNG_INFO_IDAT; +} +#endif + +void PNGAPI +png_set_compression_buffer_size(png_structrp png_ptr, png_size_t size) +{ + if (png_ptr == NULL) + return; + + if (size == 0 || size > PNG_UINT_31_MAX) + png_error(png_ptr, "invalid compression buffer size"); + +# ifdef PNG_SEQUENTIAL_READ_SUPPORTED + if (png_ptr->mode & PNG_IS_READ_STRUCT) + { + png_ptr->IDAT_read_size = (png_uint_32)size; /* checked above */ + return; + } +# endif + +# ifdef PNG_WRITE_SUPPORTED + if (!(png_ptr->mode & PNG_IS_READ_STRUCT)) + { + if (png_ptr->zowner != 0) + { + png_warning(png_ptr, + "Compression buffer size cannot be changed because it is in use"); + return; + } + + if (size > ZLIB_IO_MAX) + { + png_warning(png_ptr, + "Compression buffer size limited to system maximum"); + size = ZLIB_IO_MAX; /* must fit */ + } + + else if (size < 6) + { + /* Deflate will potentially go into an infinite loop on a SYNC_FLUSH + * if this is permitted. + */ + png_warning(png_ptr, + "Compression buffer size cannot be reduced below 6"); + return; + } + + if (png_ptr->zbuffer_size != size) + { + png_free_buffer_list(png_ptr, &png_ptr->zbuffer_list); + png_ptr->zbuffer_size = (uInt)size; + } + } +# endif +} + +void PNGAPI +png_set_invalid(png_const_structrp png_ptr, png_inforp info_ptr, int mask) +{ + if (png_ptr && info_ptr) + info_ptr->valid &= ~mask; +} + + +#ifdef PNG_SET_USER_LIMITS_SUPPORTED +/* This function was added to libpng 1.2.6 */ +void PNGAPI +png_set_user_limits (png_structrp png_ptr, png_uint_32 user_width_max, + png_uint_32 user_height_max) +{ + /* Images with dimensions larger than these limits will be + * rejected by png_set_IHDR(). To accept any PNG datastream + * regardless of dimensions, set both limits to 0x7ffffffL. + */ + if (png_ptr == NULL) + return; + + png_ptr->user_width_max = user_width_max; + png_ptr->user_height_max = user_height_max; +} + +/* This function was added to libpng 1.4.0 */ +void PNGAPI +png_set_chunk_cache_max (png_structrp png_ptr, png_uint_32 user_chunk_cache_max) +{ + if (png_ptr) + png_ptr->user_chunk_cache_max = user_chunk_cache_max; +} + +/* This function was added to libpng 1.4.1 */ +void PNGAPI +png_set_chunk_malloc_max (png_structrp png_ptr, + png_alloc_size_t user_chunk_malloc_max) +{ + if (png_ptr) + png_ptr->user_chunk_malloc_max = user_chunk_malloc_max; +} +#endif /* ?PNG_SET_USER_LIMITS_SUPPORTED */ + + +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +void PNGAPI +png_set_benign_errors(png_structrp png_ptr, int allowed) +{ + png_debug(1, "in png_set_benign_errors"); + + /* If allowed is 1, png_benign_error() is treated as a warning. + * + * If allowed is 0, png_benign_error() is treated as an error (which + * is the default behavior if png_set_benign_errors() is not called). + */ + + if (allowed) + png_ptr->flags |= PNG_FLAG_BENIGN_ERRORS_WARN | + PNG_FLAG_APP_WARNINGS_WARN | PNG_FLAG_APP_ERRORS_WARN; + + else + png_ptr->flags &= ~(PNG_FLAG_BENIGN_ERRORS_WARN | + PNG_FLAG_APP_WARNINGS_WARN | PNG_FLAG_APP_ERRORS_WARN); +} +#endif /* PNG_BENIGN_ERRORS_SUPPORTED */ + +#ifdef PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED + /* Whether to report invalid palette index; added at libng-1.5.10. + * It is possible for an indexed (color-type==3) PNG file to contain + * pixels with invalid (out-of-range) indexes if the PLTE chunk has + * fewer entries than the image's bit-depth would allow. We recover + * from this gracefully by filling any incomplete palette with zeroes + * (opaque black). By default, when this occurs libpng will issue + * a benign error. This API can be used to override that behavior. + */ +void PNGAPI +png_set_check_for_invalid_index(png_structrp png_ptr, int allowed) +{ + png_debug(1, "in png_set_check_for_invalid_index"); + + if (allowed > 0) + png_ptr->num_palette_max = 0; + + else + png_ptr->num_palette_max = -1; +} +#endif +#endif /* PNG_READ_SUPPORTED || PNG_WRITE_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngstruct.h b/src/SDL2/external/libpng-1.6.2/pngstruct.h new file mode 100644 index 000000000..d58c02884 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngstruct.h @@ -0,0 +1,489 @@ + +/* pngstruct.h - header file for PNG reference library + * + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * Last changed in libpng 1.6.1 [March 28, 2013] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +/* The structure that holds the information to read and write PNG files. + * The only people who need to care about what is inside of this are the + * people who will be modifying the library for their own special needs. + * It should NOT be accessed directly by an application. + */ + +#ifndef PNGSTRUCT_H +#define PNGSTRUCT_H +/* zlib.h defines the structure z_stream, an instance of which is included + * in this structure and is required for decompressing the LZ compressed + * data in PNG files. + */ +#ifndef ZLIB_CONST + /* We must ensure that zlib uses 'const' in declarations. */ +# define ZLIB_CONST +#endif +#include "zlib.h" +#ifdef const + /* zlib.h sometimes #defines const to nothing, undo this. */ +# undef const +#endif + +/* zlib.h has mediocre z_const use before 1.2.6, this stuff is for compatibility + * with older builds. + */ +#if ZLIB_VERNUM < 0x1260 +# define PNGZ_MSG_CAST(s) png_constcast(char*,s) +# define PNGZ_INPUT_CAST(b) png_constcast(png_bytep,b) +#else +# define PNGZ_MSG_CAST(s) (s) +# define PNGZ_INPUT_CAST(b) (b) +#endif + +/* zlib.h declares a magic type 'uInt' that limits the amount of data that zlib + * can handle at once. This type need be no larger than 16 bits (so maximum of + * 65535), this define allows us to discover how big it is, but limited by the + * maximuum for png_size_t. The value can be overriden in a library build + * (pngusr.h, or set it in CPPFLAGS) and it works to set it to a considerably + * lower value (e.g. 255 works). A lower value may help memory usage (slightly) + * and may even improve performance on some systems (and degrade it on others.) + */ +#ifndef ZLIB_IO_MAX +# define ZLIB_IO_MAX ((uInt)-1) +#endif + +#ifdef PNG_WRITE_SUPPORTED +/* The type of a compression buffer list used by the write code. */ +typedef struct png_compression_buffer +{ + struct png_compression_buffer *next; + png_byte output[1]; /* actually zbuf_size */ +} png_compression_buffer, *png_compression_bufferp; + +#define PNG_COMPRESSION_BUFFER_SIZE(pp)\ + (offsetof(png_compression_buffer, output) + (pp)->zbuffer_size) +#endif + +/* Colorspace support; structures used in png_struct, png_info and in internal + * functions to hold and communicate information about the color space. + * + * PNG_COLORSPACE_SUPPORTED is only required if the application will perform + * colorspace corrections, otherwise all the colorspace information can be + * skipped and the size of libpng can be reduced (significantly) by compiling + * out the colorspace support. + */ +#ifdef PNG_COLORSPACE_SUPPORTED +/* The chromaticities of the red, green and blue colorants and the chromaticity + * of the corresponding white point (i.e. of rgb(1.0,1.0,1.0)). + */ +typedef struct png_xy +{ + png_fixed_point redx, redy; + png_fixed_point greenx, greeny; + png_fixed_point bluex, bluey; + png_fixed_point whitex, whitey; +} png_xy; + +/* The same data as above but encoded as CIE XYZ values. When this data comes + * from chromaticities the sum of the Y values is assumed to be 1.0 + */ +typedef struct png_XYZ +{ + png_fixed_point red_X, red_Y, red_Z; + png_fixed_point green_X, green_Y, green_Z; + png_fixed_point blue_X, blue_Y, blue_Z; +} png_XYZ; +#endif /* COLORSPACE */ + +#if defined(PNG_COLORSPACE_SUPPORTED) || defined(PNG_GAMMA_SUPPORTED) +/* A colorspace is all the above plus, potentially, profile information, + * however at present libpng does not use the profile internally so it is only + * stored in the png_info struct (if iCCP is supported.) The rendering intent + * is retained here and is checked. + * + * The file gamma encoding information is also stored here and gamma correction + * is done by libpng, whereas color correction must currently be done by the + * application. + */ +typedef struct png_colorspace +{ +#ifdef PNG_GAMMA_SUPPORTED + png_fixed_point gamma; /* File gamma */ +#endif + +#ifdef PNG_COLORSPACE_SUPPORTED + png_xy end_points_xy; /* End points as chromaticities */ + png_XYZ end_points_XYZ; /* End points as CIE XYZ colorant values */ + png_uint_16 rendering_intent; /* Rendering intent of a profile */ +#endif + + /* Flags are always defined to simplify the code. */ + png_uint_16 flags; /* As defined below */ +} png_colorspace, * PNG_RESTRICT png_colorspacerp; + +typedef const png_colorspace * PNG_RESTRICT png_const_colorspacerp; + +/* General flags for the 'flags' field */ +#define PNG_COLORSPACE_HAVE_GAMMA 0x0001 +#define PNG_COLORSPACE_HAVE_ENDPOINTS 0x0002 +#define PNG_COLORSPACE_HAVE_INTENT 0x0004 +#define PNG_COLORSPACE_FROM_gAMA 0x0008 +#define PNG_COLORSPACE_FROM_cHRM 0x0010 +#define PNG_COLORSPACE_FROM_sRGB 0x0020 +#define PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB 0x0040 +#define PNG_COLORSPACE_MATCHES_sRGB 0x0080 /* exact match on profile */ +#define PNG_COLORSPACE_INVALID 0x8000 +#define PNG_COLORSPACE_CANCEL(flags) (0xffff ^ (flags)) +#endif /* COLORSPACE || GAMMA */ + +struct png_struct_def +{ +#ifdef PNG_SETJMP_SUPPORTED + jmp_buf jmp_buf_local; /* New name in 1.6.0 for jmp_buf in png_struct */ + png_longjmp_ptr longjmp_fn;/* setjmp non-local goto function. */ + jmp_buf *jmp_buf_ptr; /* passed to longjmp_fn */ + size_t jmp_buf_size; /* size of the above, if allocated */ +#endif + png_error_ptr error_fn; /* function for printing errors and aborting */ +#ifdef PNG_WARNINGS_SUPPORTED + png_error_ptr warning_fn; /* function for printing warnings */ +#endif + png_voidp error_ptr; /* user supplied struct for error functions */ + png_rw_ptr write_data_fn; /* function for writing output data */ + png_rw_ptr read_data_fn; /* function for reading input data */ + png_voidp io_ptr; /* ptr to application struct for I/O functions */ + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED + png_user_transform_ptr read_user_transform_fn; /* user read transform */ +#endif + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED + png_user_transform_ptr write_user_transform_fn; /* user write transform */ +#endif + +/* These were added in libpng-1.0.2 */ +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ + defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) + png_voidp user_transform_ptr; /* user supplied struct for user transform */ + png_byte user_transform_depth; /* bit depth of user transformed pixels */ + png_byte user_transform_channels; /* channels in user transformed pixels */ +#endif +#endif + + png_uint_32 mode; /* tells us where we are in the PNG file */ + png_uint_32 flags; /* flags indicating various things to libpng */ + png_uint_32 transformations; /* which transformations to perform */ + + png_uint_32 zowner; /* ID (chunk type) of zstream owner, 0 if none */ + z_stream zstream; /* decompression structure */ + +#ifdef PNG_WRITE_SUPPORTED + png_compression_bufferp zbuffer_list; /* Created on demand during write */ + uInt zbuffer_size; /* size of the actual buffer */ + + int zlib_level; /* holds zlib compression level */ + int zlib_method; /* holds zlib compression method */ + int zlib_window_bits; /* holds zlib compression window bits */ + int zlib_mem_level; /* holds zlib compression memory level */ + int zlib_strategy; /* holds zlib compression strategy */ +#endif +/* Added at libpng 1.5.4 */ +#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED + int zlib_text_level; /* holds zlib compression level */ + int zlib_text_method; /* holds zlib compression method */ + int zlib_text_window_bits; /* holds zlib compression window bits */ + int zlib_text_mem_level; /* holds zlib compression memory level */ + int zlib_text_strategy; /* holds zlib compression strategy */ +#endif +/* End of material added at libpng 1.5.4 */ +/* Added at libpng 1.6.0 */ +#ifdef PNG_WRITE_SUPPORTED + int zlib_set_level; /* Actual values set into the zstream on write */ + int zlib_set_method; + int zlib_set_window_bits; + int zlib_set_mem_level; + int zlib_set_strategy; +#endif + + png_uint_32 width; /* width of image in pixels */ + png_uint_32 height; /* height of image in pixels */ + png_uint_32 num_rows; /* number of rows in current pass */ + png_uint_32 usr_width; /* width of row at start of write */ + png_size_t rowbytes; /* size of row in bytes */ + png_uint_32 iwidth; /* width of current interlaced row in pixels */ + png_uint_32 row_number; /* current row in interlace pass */ + png_uint_32 chunk_name; /* PNG_CHUNK() id of current chunk */ + png_bytep prev_row; /* buffer to save previous (unfiltered) row. + * This is a pointer into big_prev_row + */ + png_bytep row_buf; /* buffer to save current (unfiltered) row. + * This is a pointer into big_row_buf + */ +#ifdef PNG_WRITE_SUPPORTED + png_bytep sub_row; /* buffer to save "sub" row when filtering */ + png_bytep up_row; /* buffer to save "up" row when filtering */ + png_bytep avg_row; /* buffer to save "avg" row when filtering */ + png_bytep paeth_row; /* buffer to save "Paeth" row when filtering */ +#endif + png_size_t info_rowbytes; /* Added in 1.5.4: cache of updated row bytes */ + + png_uint_32 idat_size; /* current IDAT size for read */ + png_uint_32 crc; /* current chunk CRC value */ + png_colorp palette; /* palette from the input file */ + png_uint_16 num_palette; /* number of color entries in palette */ + +/* Added at libpng-1.5.10 */ +#ifdef PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED + int num_palette_max; /* maximum palette index found in IDAT */ +#endif + + png_uint_16 num_trans; /* number of transparency values */ + png_byte compression; /* file compression type (always 0) */ + png_byte filter; /* file filter type (always 0) */ + png_byte interlaced; /* PNG_INTERLACE_NONE, PNG_INTERLACE_ADAM7 */ + png_byte pass; /* current interlace pass (0 - 6) */ + png_byte do_filter; /* row filter flags (see PNG_FILTER_ below ) */ + png_byte color_type; /* color type of file */ + png_byte bit_depth; /* bit depth of file */ + png_byte usr_bit_depth; /* bit depth of users row: write only */ + png_byte pixel_depth; /* number of bits per pixel */ + png_byte channels; /* number of channels in file */ +#ifdef PNG_WRITE_SUPPORTED + png_byte usr_channels; /* channels at start of write: write only */ +#endif + png_byte sig_bytes; /* magic bytes read/written from start of file */ + png_byte maximum_pixel_depth; + /* pixel depth used for the row buffers */ + png_byte transformed_pixel_depth; + /* pixel depth after read/write transforms */ +#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) + png_uint_16 filler; /* filler bytes for pixel expansion */ +#endif + +#if defined(PNG_bKGD_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) ||\ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) + png_byte background_gamma_type; + png_fixed_point background_gamma; + png_color_16 background; /* background color in screen gamma space */ +#ifdef PNG_READ_GAMMA_SUPPORTED + png_color_16 background_1; /* background normalized to gamma 1.0 */ +#endif +#endif /* PNG_bKGD_SUPPORTED */ + +#ifdef PNG_WRITE_FLUSH_SUPPORTED + png_flush_ptr output_flush_fn; /* Function for flushing output */ + png_uint_32 flush_dist; /* how many rows apart to flush, 0 - no flush */ + png_uint_32 flush_rows; /* number of rows written since last flush */ +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED + int gamma_shift; /* number of "insignificant" bits in 16-bit gamma */ + png_fixed_point screen_gamma; /* screen gamma value (display_exponent) */ + + png_bytep gamma_table; /* gamma table for 8-bit depth files */ + png_uint_16pp gamma_16_table; /* gamma table for 16-bit depth files */ +#if defined(PNG_READ_BACKGROUND_SUPPORTED) || \ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \ + defined(PNG_READ_RGB_TO_GRAY_SUPPORTED) + png_bytep gamma_from_1; /* converts from 1.0 to screen */ + png_bytep gamma_to_1; /* converts from file to 1.0 */ + png_uint_16pp gamma_16_from_1; /* converts from 1.0 to screen */ + png_uint_16pp gamma_16_to_1; /* converts from file to 1.0 */ +#endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */ +#endif + +#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_sBIT_SUPPORTED) + png_color_8 sig_bit; /* significant bits in each available channel */ +#endif + +#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) + png_color_8 shift; /* shift for significant bit tranformation */ +#endif + +#if defined(PNG_tRNS_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) \ + || defined(PNG_READ_EXPAND_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) + png_bytep trans_alpha; /* alpha values for paletted files */ + png_color_16 trans_color; /* transparent color for non-paletted files */ +#endif + + png_read_status_ptr read_row_fn; /* called after each row is decoded */ + png_write_status_ptr write_row_fn; /* called after each row is encoded */ +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED + png_progressive_info_ptr info_fn; /* called after header data fully read */ + png_progressive_row_ptr row_fn; /* called after a prog. row is decoded */ + png_progressive_end_ptr end_fn; /* called after image is complete */ + png_bytep save_buffer_ptr; /* current location in save_buffer */ + png_bytep save_buffer; /* buffer for previously read data */ + png_bytep current_buffer_ptr; /* current location in current_buffer */ + png_bytep current_buffer; /* buffer for recently used data */ + png_uint_32 push_length; /* size of current input chunk */ + png_uint_32 skip_length; /* bytes to skip in input data */ + png_size_t save_buffer_size; /* amount of data now in save_buffer */ + png_size_t save_buffer_max; /* total size of save_buffer */ + png_size_t buffer_size; /* total amount of available input data */ + png_size_t current_buffer_size; /* amount of data now in current_buffer */ + int process_mode; /* what push library is currently doing */ + int cur_palette; /* current push library palette index */ + +#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */ + +#if defined(__TURBOC__) && !defined(_Windows) && !defined(__FLAT__) +/* For the Borland special 64K segment handler */ + png_bytepp offset_table_ptr; + png_bytep offset_table; + png_uint_16 offset_table_number; + png_uint_16 offset_table_count; + png_uint_16 offset_table_count_free; +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED + png_bytep palette_lookup; /* lookup table for quantizing */ + png_bytep quantize_index; /* index translation for palette files */ +#endif + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + png_byte heuristic_method; /* heuristic for row filter selection */ + png_byte num_prev_filters; /* number of weights for previous rows */ + png_bytep prev_filters; /* filter type(s) of previous row(s) */ + png_uint_16p filter_weights; /* weight(s) for previous line(s) */ + png_uint_16p inv_filter_weights; /* 1/weight(s) for previous line(s) */ + png_uint_16p filter_costs; /* relative filter calculation cost */ + png_uint_16p inv_filter_costs; /* 1/relative filter calculation cost */ +#endif + + /* Options */ +#ifdef PNG_SET_OPTION_SUPPORTED + png_byte options; /* On/off state (up to 4 options) */ +#endif + +#if PNG_LIBPNG_VER < 10700 +/* To do: remove this from libpng-1.7 */ +#ifdef PNG_TIME_RFC1123_SUPPORTED + char time_buffer[29]; /* String to hold RFC 1123 time text */ +#endif +#endif + +/* New members added in libpng-1.0.6 */ + + png_uint_32 free_me; /* flags items libpng is responsible for freeing */ + +#ifdef PNG_USER_CHUNKS_SUPPORTED + png_voidp user_chunk_ptr; +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED + png_user_chunk_ptr read_user_chunk_fn; /* user read chunk handler */ +#endif +#endif + +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED + int unknown_default; /* As PNG_HANDLE_* */ + unsigned int num_chunk_list; /* Number of entries in the list */ + png_bytep chunk_list; /* List of png_byte[5]; the textual chunk name + * followed by a PNG_HANDLE_* byte */ +#endif + +/* New members added in libpng-1.0.3 */ +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED + png_byte rgb_to_gray_status; + /* Added in libpng 1.5.5 to record setting of coefficients: */ + png_byte rgb_to_gray_coefficients_set; + /* These were changed from png_byte in libpng-1.0.6 */ + png_uint_16 rgb_to_gray_red_coeff; + png_uint_16 rgb_to_gray_green_coeff; + /* deleted in 1.5.5: rgb_to_gray_blue_coeff; */ +#endif + +/* New member added in libpng-1.0.4 (renamed in 1.0.9) */ +#if defined(PNG_MNG_FEATURES_SUPPORTED) +/* Changed from png_byte to png_uint_32 at version 1.2.0 */ + png_uint_32 mng_features_permitted; +#endif + +/* New member added in libpng-1.0.9, ifdef'ed out in 1.0.12, enabled in 1.2.0 */ +#ifdef PNG_MNG_FEATURES_SUPPORTED + png_byte filter_type; +#endif + +/* New members added in libpng-1.2.0 */ + +/* New members added in libpng-1.0.2 but first enabled by default in 1.2.0 */ +#ifdef PNG_USER_MEM_SUPPORTED + png_voidp mem_ptr; /* user supplied struct for mem functions */ + png_malloc_ptr malloc_fn; /* function for allocating memory */ + png_free_ptr free_fn; /* function for freeing memory */ +#endif + +/* New member added in libpng-1.0.13 and 1.2.0 */ + png_bytep big_row_buf; /* buffer to save current (unfiltered) row */ + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +/* The following three members were added at version 1.0.14 and 1.2.4 */ + png_bytep quantize_sort; /* working sort array */ + png_bytep index_to_palette; /* where the original index currently is + in the palette */ + png_bytep palette_to_index; /* which original index points to this + palette color */ +#endif + +/* New members added in libpng-1.0.16 and 1.2.6 */ + png_byte compression_type; + +#ifdef PNG_USER_LIMITS_SUPPORTED + png_uint_32 user_width_max; + png_uint_32 user_height_max; + + /* Added in libpng-1.4.0: Total number of sPLT, text, and unknown + * chunks that can be stored (0 means unlimited). + */ + png_uint_32 user_chunk_cache_max; + + /* Total memory that a zTXt, sPLT, iTXt, iCCP, or unknown chunk + * can occupy when decompressed. 0 means unlimited. + */ + png_alloc_size_t user_chunk_malloc_max; +#endif + +/* New member added in libpng-1.0.25 and 1.2.17 */ +#ifdef PNG_READ_UNKNOWN_CHUNKS_SUPPORTED + /* Temporary storage for unknown chunk that the library doesn't recognize, + * used while reading the chunk. + */ + png_unknown_chunk unknown_chunk; +#endif + +/* New member added in libpng-1.2.26 */ + png_size_t old_big_row_buf_size; + +#ifdef PNG_READ_SUPPORTED +/* New member added in libpng-1.2.30 */ + png_bytep read_buffer; /* buffer for reading chunk data */ + png_alloc_size_t read_buffer_size; /* current size of the buffer */ +#endif +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED + uInt IDAT_read_size; /* limit on read buffer size for IDAT */ +#endif + +#ifdef PNG_IO_STATE_SUPPORTED +/* New member added in libpng-1.4.0 */ + png_uint_32 io_state; +#endif + +/* New member added in libpng-1.5.6 */ + png_bytep big_prev_row; + +/* New member added in libpng-1.5.7 */ + void (*read_filter[PNG_FILTER_VALUE_LAST-1])(png_row_infop row_info, + png_bytep row, png_const_bytep prev_row); + +#ifdef PNG_READ_SUPPORTED +#if defined(PNG_COLORSPACE_SUPPORTED) || defined(PNG_GAMMA_SUPPORTED) + png_colorspace colorspace; +#endif +#endif +}; +#endif /* PNGSTRUCT_H */ diff --git a/src/SDL2/external/libpng-1.6.2/pngtest.c b/src/SDL2/external/libpng-1.6.2/pngtest.c new file mode 100644 index 000000000..144f2db35 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngtest.c @@ -0,0 +1,1971 @@ + +/* pngtest.c - a simple test program to test libpng + * + * Last changed in libpng 1.6.2 [April 25, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * This program reads in a PNG image, writes it out again, and then + * compares the two files. If the files are identical, this shows that + * the basic chunk handling, filtering, and (de)compression code is working + * properly. It does not currently test all of the transforms, although + * it probably should. + * + * The program will report "FAIL" in certain legitimate cases: + * 1) when the compression level or filter selection method is changed. + * 2) when the maximum IDAT size (PNG_ZBUF_SIZE in pngconf.h) is not 8192. + * 3) unknown unsafe-to-copy ancillary chunks or unknown critical chunks + * exist in the input file. + * 4) others not listed here... + * In these cases, it is best to check with another tool such as "pngcheck" + * to see what the differences between the two files are. + * + * If a filename is given on the command-line, then this file is used + * for the input, rather than the default "pngtest.png". This allows + * testing a wide variety of files easily. You can also test a number + * of files at once by typing "pngtest -m file1.png file2.png ..." + */ + +#define _POSIX_SOURCE 1 + +#include +#include +#include + +/* Defined so I can write to a file on gui/windowing platforms */ +/* #define STDERR stderr */ +#define STDERR stdout /* For DOS */ + +#include "png.h" + +/* Known chunks that exist in pngtest.png must be supported or pngtest will fail + * simply as a result of re-ordering them. This may be fixed in 1.7 + */ +#if defined PNG_READ_SUPPORTED && /* else nothing can be done */\ + defined PNG_READ_bKGD_SUPPORTED &&\ + defined PNG_READ_cHRM_SUPPORTED &&\ + defined PNG_READ_gAMA_SUPPORTED &&\ + defined PNG_READ_oFFs_SUPPORTED &&\ + defined PNG_READ_pCAL_SUPPORTED &&\ + defined PNG_READ_pHYs_SUPPORTED &&\ + defined PNG_READ_sBIT_SUPPORTED &&\ + defined PNG_READ_sCAL_SUPPORTED &&\ + defined PNG_READ_sRGB_SUPPORTED &&\ + defined PNG_READ_tEXt_SUPPORTED &&\ + defined PNG_READ_tIME_SUPPORTED &&\ + defined PNG_READ_zTXt_SUPPORTED + +#include "zlib.h" +/* Copied from pngpriv.h but only used in error messages below. */ +#ifndef PNG_ZBUF_SIZE +# define PNG_ZBUF_SIZE 8192 +#endif +#define FCLOSE(file) fclose(file) + +#ifndef PNG_STDIO_SUPPORTED +typedef FILE * png_FILE_p; +#endif + +/* Makes pngtest verbose so we can find problems. */ +#ifndef PNG_DEBUG +# define PNG_DEBUG 0 +#endif + +#if PNG_DEBUG > 1 +# define pngtest_debug(m) ((void)fprintf(stderr, m "\n")) +# define pngtest_debug1(m,p1) ((void)fprintf(stderr, m "\n", p1)) +# define pngtest_debug2(m,p1,p2) ((void)fprintf(stderr, m "\n", p1, p2)) +#else +# define pngtest_debug(m) ((void)0) +# define pngtest_debug1(m,p1) ((void)0) +# define pngtest_debug2(m,p1,p2) ((void)0) +#endif + +#if !PNG_DEBUG +# define SINGLE_ROWBUF_ALLOC /* Makes buffer overruns easier to nail */ +#endif + +/* Turn on CPU timing +#define PNGTEST_TIMING +*/ + +#ifndef PNG_FLOATING_POINT_SUPPORTED +#undef PNGTEST_TIMING +#endif + +#ifdef PNGTEST_TIMING +static float t_start, t_stop, t_decode, t_encode, t_misc; +#include +#endif + +#ifdef PNG_TIME_RFC1123_SUPPORTED +#define PNG_tIME_STRING_LENGTH 29 +static int tIME_chunk_present = 0; +static char tIME_string[PNG_tIME_STRING_LENGTH] = "tIME chunk is not present"; +#endif + +static int verbose = 0; +static int strict = 0; +static int relaxed = 0; +static int unsupported_chunks = 0; /* chunk unsupported by libpng in input */ +static int error_count = 0; /* count calls to png_error */ +static int warning_count = 0; /* count calls to png_warning */ + +#ifdef __TURBOC__ +#include +#endif + +/* Define png_jmpbuf() in case we are using a pre-1.0.6 version of libpng */ +#ifndef png_jmpbuf +# define png_jmpbuf(png_ptr) png_ptr->jmpbuf +#endif + +/* Defines for unknown chunk handling if required. */ +#ifndef PNG_HANDLE_CHUNK_ALWAYS +# define PNG_HANDLE_CHUNK_ALWAYS 3 +#endif +#ifndef PNG_HANDLE_CHUNK_IF_SAFE +# define PNG_HANDLE_CHUNK_IF_SAFE 2 +#endif + +/* Utility to save typing/errors, the argument must be a name */ +#define MEMZERO(var) ((void)memset(&var, 0, sizeof var)) + +/* Example of using row callbacks to make a simple progress meter */ +static int status_pass = 1; +static int status_dots_requested = 0; +static int status_dots = 1; + +static void PNGCBAPI +read_row_callback(png_structp png_ptr, png_uint_32 row_number, int pass) +{ + if (png_ptr == NULL || row_number > PNG_UINT_31_MAX) + return; + + if (status_pass != pass) + { + fprintf(stdout, "\n Pass %d: ", pass); + status_pass = pass; + status_dots = 31; + } + + status_dots--; + + if (status_dots == 0) + { + fprintf(stdout, "\n "); + status_dots=30; + } + + fprintf(stdout, "r"); +} + +#ifdef PNG_WRITE_SUPPORTED +static void PNGCBAPI +write_row_callback(png_structp png_ptr, png_uint_32 row_number, int pass) +{ + if (png_ptr == NULL || row_number > PNG_UINT_31_MAX || pass > 7) + return; + + fprintf(stdout, "w"); +} +#endif + + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED +/* Example of using user transform callback (we don't transform anything, + * but merely examine the row filters. We set this to 256 rather than + * 5 in case illegal filter values are present.) + */ +static png_uint_32 filters_used[256]; +static void PNGCBAPI +count_filters(png_structp png_ptr, png_row_infop row_info, png_bytep data) +{ + if (png_ptr != NULL && row_info != NULL) + ++filters_used[*(data - 1)]; +} +#endif + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED +/* Example of using user transform callback (we don't transform anything, + * but merely count the zero samples) + */ + +static png_uint_32 zero_samples; + +static void PNGCBAPI +count_zero_samples(png_structp png_ptr, png_row_infop row_info, png_bytep data) +{ + png_bytep dp = data; + if (png_ptr == NULL) + return; + + /* Contents of row_info: + * png_uint_32 width width of row + * png_uint_32 rowbytes number of bytes in row + * png_byte color_type color type of pixels + * png_byte bit_depth bit depth of samples + * png_byte channels number of channels (1-4) + * png_byte pixel_depth bits per pixel (depth*channels) + */ + + /* Counts the number of zero samples (or zero pixels if color_type is 3 */ + + if (row_info->color_type == 0 || row_info->color_type == 3) + { + int pos = 0; + png_uint_32 n, nstop; + + for (n = 0, nstop=row_info->width; nbit_depth == 1) + { + if (((*dp << pos++ ) & 0x80) == 0) + zero_samples++; + + if (pos == 8) + { + pos = 0; + dp++; + } + } + + if (row_info->bit_depth == 2) + { + if (((*dp << (pos+=2)) & 0xc0) == 0) + zero_samples++; + + if (pos == 8) + { + pos = 0; + dp++; + } + } + + if (row_info->bit_depth == 4) + { + if (((*dp << (pos+=4)) & 0xf0) == 0) + zero_samples++; + + if (pos == 8) + { + pos = 0; + dp++; + } + } + + if (row_info->bit_depth == 8) + if (*dp++ == 0) + zero_samples++; + + if (row_info->bit_depth == 16) + { + if ((*dp | *(dp+1)) == 0) + zero_samples++; + dp+=2; + } + } + } + else /* Other color types */ + { + png_uint_32 n, nstop; + int channel; + int color_channels = row_info->channels; + if (row_info->color_type > 3)color_channels--; + + for (n = 0, nstop=row_info->width; nbit_depth == 8) + if (*dp++ == 0) + zero_samples++; + + if (row_info->bit_depth == 16) + { + if ((*dp | *(dp+1)) == 0) + zero_samples++; + + dp+=2; + } + } + if (row_info->color_type > 3) + { + dp++; + if (row_info->bit_depth == 16) + dp++; + } + } + } +} +#endif /* PNG_WRITE_USER_TRANSFORM_SUPPORTED */ + +#ifndef PNG_STDIO_SUPPORTED +/* START of code to validate stdio-free compilation */ +/* These copies of the default read/write functions come from pngrio.c and + * pngwio.c. They allow "don't include stdio" testing of the library. + * This is the function that does the actual reading of data. If you are + * not reading from a standard C stream, you should create a replacement + * read_data function and use it at run time with png_set_read_fn(), rather + * than changing the library. + */ + +#ifdef PNG_IO_STATE_SUPPORTED +void +pngtest_check_io_state(png_structp png_ptr, png_size_t data_length, + png_uint_32 io_op); +void +pngtest_check_io_state(png_structp png_ptr, png_size_t data_length, + png_uint_32 io_op) +{ + png_uint_32 io_state = png_get_io_state(png_ptr); + int err = 0; + + /* Check if the current operation (reading / writing) is as expected. */ + if ((io_state & PNG_IO_MASK_OP) != io_op) + png_error(png_ptr, "Incorrect operation in I/O state"); + + /* Check if the buffer size specific to the current location + * (file signature / header / data / crc) is as expected. + */ + switch (io_state & PNG_IO_MASK_LOC) + { + case PNG_IO_SIGNATURE: + if (data_length > 8) + err = 1; + break; + case PNG_IO_CHUNK_HDR: + if (data_length != 8) + err = 1; + break; + case PNG_IO_CHUNK_DATA: + break; /* no restrictions here */ + case PNG_IO_CHUNK_CRC: + if (data_length != 4) + err = 1; + break; + default: + err = 1; /* uninitialized */ + } + if (err) + png_error(png_ptr, "Bad I/O state or buffer size"); +} +#endif + +static void PNGCBAPI +pngtest_read_data(png_structp png_ptr, png_bytep data, png_size_t length) +{ + png_size_t check = 0; + png_voidp io_ptr; + + /* fread() returns 0 on error, so it is OK to store this in a png_size_t + * instead of an int, which is what fread() actually returns. + */ + io_ptr = png_get_io_ptr(png_ptr); + if (io_ptr != NULL) + { + check = fread(data, 1, length, (png_FILE_p)io_ptr); + } + + if (check != length) + { + png_error(png_ptr, "Read Error"); + } + +#ifdef PNG_IO_STATE_SUPPORTED + pngtest_check_io_state(png_ptr, length, PNG_IO_READING); +#endif +} + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +static void PNGCBAPI +pngtest_flush(png_structp png_ptr) +{ + /* Do nothing; fflush() is said to be just a waste of energy. */ + PNG_UNUSED(png_ptr) /* Stifle compiler warning */ +} +#endif + +/* This is the function that does the actual writing of data. If you are + * not writing to a standard C stream, you should create a replacement + * write_data function and use it at run time with png_set_write_fn(), rather + * than changing the library. + */ +static void PNGCBAPI +pngtest_write_data(png_structp png_ptr, png_bytep data, png_size_t length) +{ + png_size_t check; + + check = fwrite(data, 1, length, (png_FILE_p)png_get_io_ptr(png_ptr)); + + if (check != length) + { + png_error(png_ptr, "Write Error"); + } + +#ifdef PNG_IO_STATE_SUPPORTED + pngtest_check_io_state(png_ptr, length, PNG_IO_WRITING); +#endif +} +#endif /* !PNG_STDIO_SUPPORTED */ + +/* This function is called when there is a warning, but the library thinks + * it can continue anyway. Replacement functions don't have to do anything + * here if you don't want to. In the default configuration, png_ptr is + * not used, but it is passed in case it may be useful. + */ +typedef struct +{ + PNG_CONST char *file_name; +} pngtest_error_parameters; + +static void PNGCBAPI +pngtest_warning(png_structp png_ptr, png_const_charp message) +{ + PNG_CONST char *name = "UNKNOWN (ERROR!)"; + pngtest_error_parameters *test = + (pngtest_error_parameters*)png_get_error_ptr(png_ptr); + + ++warning_count; + + if (test != NULL && test->file_name != NULL) + name = test->file_name; + + fprintf(STDERR, "%s: libpng warning: %s\n", name, message); +} + +/* This is the default error handling function. Note that replacements for + * this function MUST NOT RETURN, or the program will likely crash. This + * function is used by default, or if the program supplies NULL for the + * error function pointer in png_set_error_fn(). + */ +static void PNGCBAPI +pngtest_error(png_structp png_ptr, png_const_charp message) +{ + ++error_count; + + pngtest_warning(png_ptr, message); + /* We can return because png_error calls the default handler, which is + * actually OK in this case. + */ +} + +/* END of code to validate stdio-free compilation */ + +/* START of code to validate memory allocation and deallocation */ +#if defined(PNG_USER_MEM_SUPPORTED) && PNG_DEBUG + +/* Allocate memory. For reasonable files, size should never exceed + * 64K. However, zlib may allocate more then 64K if you don't tell + * it not to. See zconf.h and png.h for more information. zlib does + * need to allocate exactly 64K, so whatever you call here must + * have the ability to do that. + * + * This piece of code can be compiled to validate max 64K allocations + * by setting MAXSEG_64K in zlib zconf.h *or* PNG_MAX_MALLOC_64K. + */ +typedef struct memory_information +{ + png_alloc_size_t size; + png_voidp pointer; + struct memory_information *next; +} memory_information; +typedef memory_information *memory_infop; + +static memory_infop pinformation = NULL; +static int current_allocation = 0; +static int maximum_allocation = 0; +static int total_allocation = 0; +static int num_allocations = 0; + +png_voidp PNGCBAPI png_debug_malloc PNGARG((png_structp png_ptr, + png_alloc_size_t size)); +void PNGCBAPI png_debug_free PNGARG((png_structp png_ptr, png_voidp ptr)); + +png_voidp +PNGCBAPI png_debug_malloc(png_structp png_ptr, png_alloc_size_t size) +{ + + /* png_malloc has already tested for NULL; png_create_struct calls + * png_debug_malloc directly, with png_ptr == NULL which is OK + */ + + if (size == 0) + return (NULL); + + /* This calls the library allocator twice, once to get the requested + buffer and once to get a new free list entry. */ + { + /* Disable malloc_fn and free_fn */ + memory_infop pinfo; + png_set_mem_fn(png_ptr, NULL, NULL, NULL); + pinfo = (memory_infop)png_malloc(png_ptr, + (sizeof *pinfo)); + pinfo->size = size; + current_allocation += size; + total_allocation += size; + num_allocations ++; + + if (current_allocation > maximum_allocation) + maximum_allocation = current_allocation; + + pinfo->pointer = png_malloc(png_ptr, size); + /* Restore malloc_fn and free_fn */ + + png_set_mem_fn(png_ptr, + NULL, png_debug_malloc, png_debug_free); + + if (size != 0 && pinfo->pointer == NULL) + { + current_allocation -= size; + total_allocation -= size; + png_error(png_ptr, + "out of memory in pngtest->png_debug_malloc"); + } + + pinfo->next = pinformation; + pinformation = pinfo; + /* Make sure the caller isn't assuming zeroed memory. */ + memset(pinfo->pointer, 0xdd, pinfo->size); + + if (verbose) + printf("png_malloc %lu bytes at %p\n", (unsigned long)size, + pinfo->pointer); + + return (png_voidp)(pinfo->pointer); + } +} + +/* Free a pointer. It is removed from the list at the same time. */ +void PNGCBAPI +png_debug_free(png_structp png_ptr, png_voidp ptr) +{ + if (png_ptr == NULL) + fprintf(STDERR, "NULL pointer to png_debug_free.\n"); + + if (ptr == 0) + { +#if 0 /* This happens all the time. */ + fprintf(STDERR, "WARNING: freeing NULL pointer\n"); +#endif + return; + } + + /* Unlink the element from the list. */ + { + memory_infop *ppinfo = &pinformation; + + for (;;) + { + memory_infop pinfo = *ppinfo; + + if (pinfo->pointer == ptr) + { + *ppinfo = pinfo->next; + current_allocation -= pinfo->size; + if (current_allocation < 0) + fprintf(STDERR, "Duplicate free of memory\n"); + /* We must free the list element too, but first kill + the memory that is to be freed. */ + memset(ptr, 0x55, pinfo->size); + png_free_default(png_ptr, pinfo); + pinfo = NULL; + break; + } + + if (pinfo->next == NULL) + { + fprintf(STDERR, "Pointer %x not found\n", (unsigned int)ptr); + break; + } + + ppinfo = &pinfo->next; + } + } + + /* Finally free the data. */ + if (verbose) + printf("Freeing %p\n", ptr); + + png_free_default(png_ptr, ptr); + ptr = NULL; +} +#endif /* PNG_USER_MEM_SUPPORTED && PNG_DEBUG */ +/* END of code to test memory allocation/deallocation */ + + +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED +/* Demonstration of user chunk support of the sTER and vpAg chunks */ + +/* (sTER is a public chunk not yet known by libpng. vpAg is a private +chunk used in ImageMagick to store "virtual page" size). */ + +static struct user_chunk_data +{ + png_const_infop info_ptr; + png_uint_32 vpAg_width, vpAg_height; + png_byte vpAg_units; + png_byte sTER_mode; + int location[2]; +} +user_chunk_data; + +/* Used for location and order; zero means nothing. */ +#define have_sTER 0x01 +#define have_vpAg 0x02 +#define before_PLTE 0x10 +#define before_IDAT 0x20 +#define after_IDAT 0x40 + +static void +init_callback_info(png_const_infop info_ptr) +{ + MEMZERO(user_chunk_data); + user_chunk_data.info_ptr = info_ptr; +} + +static int +set_location(png_structp png_ptr, struct user_chunk_data *data, int what) +{ + int location; + + if ((data->location[0] & what) || (data->location[1] & what)) + return 0; /* already have one of these */ + + /* Find where we are (the code below zeros info_ptr to indicate that the + * chunks before the first IDAT have been read.) + */ + if (data->info_ptr == NULL) /* after IDAT */ + location = what | after_IDAT; + + else if (png_get_valid(png_ptr, data->info_ptr, PNG_INFO_PLTE)) + location = what | before_IDAT; + + else + location = what | before_PLTE; + + if (data->location[0] == 0) + data->location[0] = location; + + else + data->location[1] = location; + + return 1; /* handled */ +} + +static int PNGCBAPI read_user_chunk_callback(png_struct *png_ptr, + png_unknown_chunkp chunk) +{ + struct user_chunk_data *my_user_chunk_data = + (struct user_chunk_data*)png_get_user_chunk_ptr(png_ptr); + + if (my_user_chunk_data == NULL) + png_error(png_ptr, "lost user chunk pointer"); + + /* Return one of the following: + * return (-n); chunk had an error + * return (0); did not recognize + * return (n); success + * + * The unknown chunk structure contains the chunk data: + * png_byte name[5]; + * png_byte *data; + * png_size_t size; + * + * Note that libpng has already taken care of the CRC handling. + */ + + if (chunk->name[0] == 115 && chunk->name[1] == 84 && /* s T */ + chunk->name[2] == 69 && chunk->name[3] == 82) /* E R */ + { + /* Found sTER chunk */ + if (chunk->size != 1) + return (-1); /* Error return */ + + if (chunk->data[0] != 0 && chunk->data[0] != 1) + return (-1); /* Invalid mode */ + + if (set_location(png_ptr, my_user_chunk_data, have_sTER)) + { + my_user_chunk_data->sTER_mode=chunk->data[0]; + return (1); + } + + else + return (0); /* duplicate sTER - give it to libpng */ + } + + if (chunk->name[0] != 118 || chunk->name[1] != 112 || /* v p */ + chunk->name[2] != 65 || chunk->name[3] != 103) /* A g */ + return (0); /* Did not recognize */ + + /* Found ImageMagick vpAg chunk */ + + if (chunk->size != 9) + return (-1); /* Error return */ + + if (!set_location(png_ptr, my_user_chunk_data, have_vpAg)) + return (0); /* duplicate vpAg */ + + my_user_chunk_data->vpAg_width = png_get_uint_31(png_ptr, chunk->data); + my_user_chunk_data->vpAg_height = png_get_uint_31(png_ptr, chunk->data + 4); + my_user_chunk_data->vpAg_units = chunk->data[8]; + + return (1); +} + +#ifdef PNG_WRITE_SUPPORTED +static void +write_sTER_chunk(png_structp write_ptr) +{ + png_byte png_sTER[5] = {115, 84, 69, 82, '\0'}; + + if (verbose) + fprintf(STDERR, "\n stereo mode = %d\n", user_chunk_data.sTER_mode); + + png_write_chunk(write_ptr, png_sTER, &user_chunk_data.sTER_mode, 1); +} + +static void +write_vpAg_chunk(png_structp write_ptr) +{ + png_byte png_vpAg[5] = {118, 112, 65, 103, '\0'}; + + png_byte vpag_chunk_data[9]; + + if (verbose) + fprintf(STDERR, " vpAg = %lu x %lu, units = %d\n", + (unsigned long)user_chunk_data.vpAg_width, + (unsigned long)user_chunk_data.vpAg_height, + user_chunk_data.vpAg_units); + + png_save_uint_32(vpag_chunk_data, user_chunk_data.vpAg_width); + png_save_uint_32(vpag_chunk_data + 4, user_chunk_data.vpAg_height); + vpag_chunk_data[8] = user_chunk_data.vpAg_units; + png_write_chunk(write_ptr, png_vpAg, vpag_chunk_data, 9); +} + +static void +write_chunks(png_structp write_ptr, int location) +{ + int i; + + /* Notice that this preserves the original chunk order, however chunks + * intercepted by the callback will be written *after* chunks passed to + * libpng. This will actually reverse a pair of sTER chunks or a pair of + * vpAg chunks, resulting in an error later. This is not worth worrying + * about - the chunks should not be duplicated! + */ + for (i=0; i<2; ++i) + { + if (user_chunk_data.location[i] == (location | have_sTER)) + write_sTER_chunk(write_ptr); + + else if (user_chunk_data.location[i] == (location | have_vpAg)) + write_vpAg_chunk(write_ptr); + } +} +#endif /* PNG_WRITE_SUPPORTED */ +#else /* !PNG_READ_USER_CHUNKS_SUPPORTED */ +# define write_chunks(pp,loc) ((void)0) +#endif +/* END of code to demonstrate user chunk support */ + +/* START of code to check that libpng has the required text support; this only + * checks for the write support because if read support is missing the chunk + * will simply not be reported back to pngtest. + */ +#ifdef PNG_TEXT_SUPPORTED +static void +pngtest_check_text_support(png_const_structp png_ptr, png_textp text_ptr, + int num_text) +{ + while (num_text > 0) + { + switch (text_ptr[--num_text].compression) + { + case PNG_TEXT_COMPRESSION_NONE: + break; + + case PNG_TEXT_COMPRESSION_zTXt: +# ifndef PNG_WRITE_zTXt_SUPPORTED + ++unsupported_chunks; +# endif + break; + + case PNG_ITXT_COMPRESSION_NONE: + case PNG_ITXT_COMPRESSION_zTXt: +# ifndef PNG_WRITE_iTXt_SUPPORTED + ++unsupported_chunks; +# endif + break; + + default: + /* This is an error */ + png_error(png_ptr, "invalid text chunk compression field"); + break; + } + } +} +#endif +/* END of code to check that libpng has the required text support */ + +/* Test one file */ +static int +test_one_file(PNG_CONST char *inname, PNG_CONST char *outname) +{ + static png_FILE_p fpin; + static png_FILE_p fpout; /* "static" prevents setjmp corruption */ + pngtest_error_parameters error_parameters; + png_structp read_ptr; + png_infop read_info_ptr, end_info_ptr; +#ifdef PNG_WRITE_SUPPORTED + png_structp write_ptr; + png_infop write_info_ptr; + png_infop write_end_info_ptr; +#else + png_structp write_ptr = NULL; + png_infop write_info_ptr = NULL; + png_infop write_end_info_ptr = NULL; +#endif + png_bytep row_buf; + png_uint_32 y; + png_uint_32 width, height; + int num_pass, pass; + int bit_depth, color_type; + + row_buf = NULL; + error_parameters.file_name = inname; + + if ((fpin = fopen(inname, "rb")) == NULL) + { + fprintf(STDERR, "Could not find input file %s\n", inname); + return (1); + } + + if ((fpout = fopen(outname, "wb")) == NULL) + { + fprintf(STDERR, "Could not open output file %s\n", outname); + FCLOSE(fpin); + return (1); + } + + pngtest_debug("Allocating read and write structures"); +#if defined(PNG_USER_MEM_SUPPORTED) && PNG_DEBUG + read_ptr = + png_create_read_struct_2(PNG_LIBPNG_VER_STRING, NULL, + NULL, NULL, NULL, png_debug_malloc, png_debug_free); +#else + read_ptr = + png_create_read_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL); +#endif + png_set_error_fn(read_ptr, &error_parameters, pngtest_error, + pngtest_warning); + +#ifdef PNG_WRITE_SUPPORTED +#if defined(PNG_USER_MEM_SUPPORTED) && PNG_DEBUG + write_ptr = + png_create_write_struct_2(PNG_LIBPNG_VER_STRING, NULL, + NULL, NULL, NULL, png_debug_malloc, png_debug_free); +#else + write_ptr = + png_create_write_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL); +#endif + png_set_error_fn(write_ptr, &error_parameters, pngtest_error, + pngtest_warning); +#endif + pngtest_debug("Allocating read_info, write_info and end_info structures"); + read_info_ptr = png_create_info_struct(read_ptr); + end_info_ptr = png_create_info_struct(read_ptr); +#ifdef PNG_WRITE_SUPPORTED + write_info_ptr = png_create_info_struct(write_ptr); + write_end_info_ptr = png_create_info_struct(write_ptr); +#endif + +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED + init_callback_info(read_info_ptr); + png_set_read_user_chunk_fn(read_ptr, &user_chunk_data, + read_user_chunk_callback); +#endif + +#ifdef PNG_SETJMP_SUPPORTED + pngtest_debug("Setting jmpbuf for read struct"); + if (setjmp(png_jmpbuf(read_ptr))) + { + fprintf(STDERR, "%s -> %s: libpng read error\n", inname, outname); + png_free(read_ptr, row_buf); + row_buf = NULL; + png_destroy_read_struct(&read_ptr, &read_info_ptr, &end_info_ptr); +#ifdef PNG_WRITE_SUPPORTED + png_destroy_info_struct(write_ptr, &write_end_info_ptr); + png_destroy_write_struct(&write_ptr, &write_info_ptr); +#endif + FCLOSE(fpin); + FCLOSE(fpout); + return (1); + } + +#ifdef PNG_WRITE_SUPPORTED + pngtest_debug("Setting jmpbuf for write struct"); + + if (setjmp(png_jmpbuf(write_ptr))) + { + fprintf(STDERR, "%s -> %s: libpng write error\n", inname, outname); + png_destroy_read_struct(&read_ptr, &read_info_ptr, &end_info_ptr); + png_destroy_info_struct(write_ptr, &write_end_info_ptr); +#ifdef PNG_WRITE_SUPPORTED + png_destroy_write_struct(&write_ptr, &write_info_ptr); +#endif + FCLOSE(fpin); + FCLOSE(fpout); + return (1); + } +#endif +#endif + + if (strict) + { + /* Treat png_benign_error() as errors on read */ + png_set_benign_errors(read_ptr, 0); + +#ifdef PNG_WRITE_SUPPORTED + /* Treat them as errors on write */ + png_set_benign_errors(write_ptr, 0); +#endif + + /* if strict is not set, then app warnings and errors are treated as + * warnings in release builds, but not in unstable builds; this can be + * changed with '--relaxed'. + */ + } + + else if (relaxed) + { + /* Allow application (pngtest) errors and warnings to pass */ + png_set_benign_errors(read_ptr, 1); + +#ifdef PNG_WRITE_SUPPORTED + png_set_benign_errors(write_ptr, 1); +#endif + } + + pngtest_debug("Initializing input and output streams"); +#ifdef PNG_STDIO_SUPPORTED + png_init_io(read_ptr, fpin); +# ifdef PNG_WRITE_SUPPORTED + png_init_io(write_ptr, fpout); +# endif +#else + png_set_read_fn(read_ptr, (png_voidp)fpin, pngtest_read_data); +# ifdef PNG_WRITE_SUPPORTED + png_set_write_fn(write_ptr, (png_voidp)fpout, pngtest_write_data, +# ifdef PNG_WRITE_FLUSH_SUPPORTED + pngtest_flush); +# else + NULL); +# endif +# endif +#endif + + if (status_dots_requested == 1) + { +#ifdef PNG_WRITE_SUPPORTED + png_set_write_status_fn(write_ptr, write_row_callback); +#endif + png_set_read_status_fn(read_ptr, read_row_callback); + } + + else + { +#ifdef PNG_WRITE_SUPPORTED + png_set_write_status_fn(write_ptr, NULL); +#endif + png_set_read_status_fn(read_ptr, NULL); + } + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED + { + int i; + + for (i = 0; i<256; i++) + filters_used[i] = 0; + + png_set_read_user_transform_fn(read_ptr, count_filters); + } +#endif +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED + zero_samples = 0; + png_set_write_user_transform_fn(write_ptr, count_zero_samples); +#endif + +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED + /* Preserve all the unknown chunks, if possible. If this is disabled then, + * even if the png_{get,set}_unknown_chunks stuff is enabled, we can't use + * libpng to *save* the unknown chunks on read (because we can't switch the + * save option on!) + * + * Notice that if SET_UNKNOWN_CHUNKS is *not* supported read will discard all + * unknown chunks and write will write them all. + */ +#ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED + png_set_keep_unknown_chunks(read_ptr, PNG_HANDLE_CHUNK_ALWAYS, + NULL, 0); +#endif +#ifdef PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED + png_set_keep_unknown_chunks(write_ptr, PNG_HANDLE_CHUNK_ALWAYS, + NULL, 0); +#endif +#endif + + pngtest_debug("Reading info struct"); + png_read_info(read_ptr, read_info_ptr); + +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED + /* This is a bit of a hack; there is no obvious way in the callback function + * to determine that the chunks before the first IDAT have been read, so + * remove the info_ptr (which is only used to determine position relative to + * PLTE) here to indicate that we are after the IDAT. + */ + user_chunk_data.info_ptr = NULL; +#endif + + pngtest_debug("Transferring info struct"); + { + int interlace_type, compression_type, filter_type; + + if (png_get_IHDR(read_ptr, read_info_ptr, &width, &height, &bit_depth, + &color_type, &interlace_type, &compression_type, &filter_type)) + { + png_set_IHDR(write_ptr, write_info_ptr, width, height, bit_depth, +#ifdef PNG_WRITE_INTERLACING_SUPPORTED + color_type, interlace_type, compression_type, filter_type); +#else + color_type, PNG_INTERLACE_NONE, compression_type, filter_type); +#endif + } + } +#ifdef PNG_FIXED_POINT_SUPPORTED +#ifdef PNG_cHRM_SUPPORTED + { + png_fixed_point white_x, white_y, red_x, red_y, green_x, green_y, blue_x, + blue_y; + + if (png_get_cHRM_fixed(read_ptr, read_info_ptr, &white_x, &white_y, + &red_x, &red_y, &green_x, &green_y, &blue_x, &blue_y)) + { + png_set_cHRM_fixed(write_ptr, write_info_ptr, white_x, white_y, red_x, + red_y, green_x, green_y, blue_x, blue_y); + } + } +#endif +#ifdef PNG_gAMA_SUPPORTED + { + png_fixed_point gamma; + + if (png_get_gAMA_fixed(read_ptr, read_info_ptr, &gamma)) + png_set_gAMA_fixed(write_ptr, write_info_ptr, gamma); + } +#endif +#else /* Use floating point versions */ +#ifdef PNG_FLOATING_POINT_SUPPORTED +#ifdef PNG_cHRM_SUPPORTED + { + double white_x, white_y, red_x, red_y, green_x, green_y, blue_x, + blue_y; + + if (png_get_cHRM(read_ptr, read_info_ptr, &white_x, &white_y, &red_x, + &red_y, &green_x, &green_y, &blue_x, &blue_y)) + { + png_set_cHRM(write_ptr, write_info_ptr, white_x, white_y, red_x, + red_y, green_x, green_y, blue_x, blue_y); + } + } +#endif +#ifdef PNG_gAMA_SUPPORTED + { + double gamma; + + if (png_get_gAMA(read_ptr, read_info_ptr, &gamma)) + png_set_gAMA(write_ptr, write_info_ptr, gamma); + } +#endif +#endif /* Floating point */ +#endif /* Fixed point */ +#ifdef PNG_iCCP_SUPPORTED + { + png_charp name; + png_bytep profile; + png_uint_32 proflen; + int compression_type; + + if (png_get_iCCP(read_ptr, read_info_ptr, &name, &compression_type, + &profile, &proflen)) + { + png_set_iCCP(write_ptr, write_info_ptr, name, compression_type, + profile, proflen); + } + } +#endif +#ifdef PNG_sRGB_SUPPORTED + { + int intent; + + if (png_get_sRGB(read_ptr, read_info_ptr, &intent)) + png_set_sRGB(write_ptr, write_info_ptr, intent); + } +#endif + { + png_colorp palette; + int num_palette; + + if (png_get_PLTE(read_ptr, read_info_ptr, &palette, &num_palette)) + png_set_PLTE(write_ptr, write_info_ptr, palette, num_palette); + } +#ifdef PNG_bKGD_SUPPORTED + { + png_color_16p background; + + if (png_get_bKGD(read_ptr, read_info_ptr, &background)) + { + png_set_bKGD(write_ptr, write_info_ptr, background); + } + } +#endif +#ifdef PNG_hIST_SUPPORTED + { + png_uint_16p hist; + + if (png_get_hIST(read_ptr, read_info_ptr, &hist)) + png_set_hIST(write_ptr, write_info_ptr, hist); + } +#endif +#ifdef PNG_oFFs_SUPPORTED + { + png_int_32 offset_x, offset_y; + int unit_type; + + if (png_get_oFFs(read_ptr, read_info_ptr, &offset_x, &offset_y, + &unit_type)) + { + png_set_oFFs(write_ptr, write_info_ptr, offset_x, offset_y, unit_type); + } + } +#endif +#ifdef PNG_pCAL_SUPPORTED + { + png_charp purpose, units; + png_charpp params; + png_int_32 X0, X1; + int type, nparams; + + if (png_get_pCAL(read_ptr, read_info_ptr, &purpose, &X0, &X1, &type, + &nparams, &units, ¶ms)) + { + png_set_pCAL(write_ptr, write_info_ptr, purpose, X0, X1, type, + nparams, units, params); + } + } +#endif +#ifdef PNG_pHYs_SUPPORTED + { + png_uint_32 res_x, res_y; + int unit_type; + + if (png_get_pHYs(read_ptr, read_info_ptr, &res_x, &res_y, &unit_type)) + png_set_pHYs(write_ptr, write_info_ptr, res_x, res_y, unit_type); + } +#endif +#ifdef PNG_sBIT_SUPPORTED + { + png_color_8p sig_bit; + + if (png_get_sBIT(read_ptr, read_info_ptr, &sig_bit)) + png_set_sBIT(write_ptr, write_info_ptr, sig_bit); + } +#endif +#ifdef PNG_sCAL_SUPPORTED +#if defined(PNG_FLOATING_POINT_SUPPORTED) && \ + defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) + { + int unit; + double scal_width, scal_height; + + if (png_get_sCAL(read_ptr, read_info_ptr, &unit, &scal_width, + &scal_height)) + { + png_set_sCAL(write_ptr, write_info_ptr, unit, scal_width, scal_height); + } + } +#else +#ifdef PNG_FIXED_POINT_SUPPORTED + { + int unit; + png_charp scal_width, scal_height; + + if (png_get_sCAL_s(read_ptr, read_info_ptr, &unit, &scal_width, + &scal_height)) + { + png_set_sCAL_s(write_ptr, write_info_ptr, unit, scal_width, + scal_height); + } + } +#endif +#endif +#endif +#ifdef PNG_TEXT_SUPPORTED + { + png_textp text_ptr; + int num_text; + + if (png_get_text(read_ptr, read_info_ptr, &text_ptr, &num_text) > 0) + { + pngtest_debug1("Handling %d iTXt/tEXt/zTXt chunks", num_text); + + pngtest_check_text_support(read_ptr, text_ptr, num_text); + + if (verbose) + { + int i; + + printf("\n"); + for (i=0; igray > sample_max) || + (color_type == PNG_COLOR_TYPE_RGB && + ((int)trans_color->red > sample_max || + (int)trans_color->green > sample_max || + (int)trans_color->blue > sample_max)))) + png_set_tRNS(write_ptr, write_info_ptr, trans_alpha, num_trans, + trans_color); + } + } +#endif +#ifdef PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED + { + png_unknown_chunkp unknowns; + int num_unknowns = png_get_unknown_chunks(read_ptr, read_info_ptr, + &unknowns); + + if (num_unknowns) + { + png_set_unknown_chunks(write_ptr, write_info_ptr, unknowns, + num_unknowns); +#if PNG_LIBPNG_VER < 10600 + /* Copy the locations from the read_info_ptr. The automatically + * generated locations in write_end_info_ptr are wrong prior to 1.6.0 + * because they are reset from the write pointer (removed in 1.6.0). + */ + { + int i; + for (i = 0; i < num_unknowns; i++) + png_set_unknown_chunk_location(write_ptr, write_info_ptr, i, + unknowns[i].location); + } +#endif + } + } +#endif + +#ifdef PNG_WRITE_SUPPORTED + pngtest_debug("Writing info struct"); + + /* Write the info in two steps so that if we write the 'unknown' chunks here + * they go to the correct place. + */ + png_write_info_before_PLTE(write_ptr, write_info_ptr); + + write_chunks(write_ptr, before_PLTE); /* before PLTE */ + + png_write_info(write_ptr, write_info_ptr); + + write_chunks(write_ptr, before_IDAT); /* after PLTE */ +#endif + +#ifdef SINGLE_ROWBUF_ALLOC + pngtest_debug("Allocating row buffer..."); + row_buf = (png_bytep)png_malloc(read_ptr, + png_get_rowbytes(read_ptr, read_info_ptr)); + + pngtest_debug1("\t0x%08lx", (unsigned long)row_buf); +#endif /* SINGLE_ROWBUF_ALLOC */ + pngtest_debug("Writing row data"); + +#if defined(PNG_READ_INTERLACING_SUPPORTED) || \ + defined(PNG_WRITE_INTERLACING_SUPPORTED) + num_pass = png_set_interlace_handling(read_ptr); +# ifdef PNG_WRITE_SUPPORTED + png_set_interlace_handling(write_ptr); +# endif +#else + num_pass = 1; +#endif + +#ifdef PNGTEST_TIMING + t_stop = (float)clock(); + t_misc += (t_stop - t_start); + t_start = t_stop; +#endif + for (pass = 0; pass < num_pass; pass++) + { + pngtest_debug1("Writing row data for pass %d", pass); + for (y = 0; y < height; y++) + { +#ifndef SINGLE_ROWBUF_ALLOC + pngtest_debug2("Allocating row buffer (pass %d, y = %u)...", pass, y); + row_buf = (png_bytep)png_malloc(read_ptr, + png_get_rowbytes(read_ptr, read_info_ptr)); + + pngtest_debug2("\t0x%08lx (%u bytes)", (unsigned long)row_buf, + png_get_rowbytes(read_ptr, read_info_ptr)); + +#endif /* !SINGLE_ROWBUF_ALLOC */ + png_read_rows(read_ptr, (png_bytepp)&row_buf, NULL, 1); + +#ifdef PNG_WRITE_SUPPORTED +#ifdef PNGTEST_TIMING + t_stop = (float)clock(); + t_decode += (t_stop - t_start); + t_start = t_stop; +#endif + png_write_rows(write_ptr, (png_bytepp)&row_buf, 1); +#ifdef PNGTEST_TIMING + t_stop = (float)clock(); + t_encode += (t_stop - t_start); + t_start = t_stop; +#endif +#endif /* PNG_WRITE_SUPPORTED */ + +#ifndef SINGLE_ROWBUF_ALLOC + pngtest_debug2("Freeing row buffer (pass %d, y = %u)", pass, y); + png_free(read_ptr, row_buf); + row_buf = NULL; +#endif /* !SINGLE_ROWBUF_ALLOC */ + } + } + +#ifdef PNG_READ_UNKNOWN_CHUNKS_SUPPORTED + png_free_data(read_ptr, read_info_ptr, PNG_FREE_UNKN, -1); +#endif +#ifdef PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED + png_free_data(write_ptr, write_info_ptr, PNG_FREE_UNKN, -1); +#endif + + pngtest_debug("Reading and writing end_info data"); + + png_read_end(read_ptr, end_info_ptr); +#ifdef PNG_TEXT_SUPPORTED + { + png_textp text_ptr; + int num_text; + + if (png_get_text(read_ptr, end_info_ptr, &text_ptr, &num_text) > 0) + { + pngtest_debug1("Handling %d iTXt/tEXt/zTXt chunks", num_text); + + pngtest_check_text_support(read_ptr, text_ptr, num_text); + + if (verbose) + { + int i; + + printf("\n"); + for (i=0; i 0) + { + /* We don't really expect to get here because of the setjmp handling + * above, but this is safe. + */ + fprintf(STDERR, "\n %s: %d libpng errors found (%d warnings)", + inname, error_count, warning_count); + + if (strict != 0) + return (1); + } + +# ifdef PNG_WRITE_SUPPORTED + /* If there we no write support nothing was written! */ + else if (unsupported_chunks > 0) + { + fprintf(STDERR, "\n %s: unsupported chunks (%d)%s", + inname, unsupported_chunks, strict ? ": IGNORED --strict!" : ""); + } +# endif + + else if (warning_count > 0) + { + fprintf(STDERR, "\n %s: %d libpng warnings found", + inname, warning_count); + + if (strict != 0) + return (1); + } + + pngtest_debug("Opening files for comparison"); + if ((fpin = fopen(inname, "rb")) == NULL) + { + fprintf(STDERR, "Could not find file %s\n", inname); + return (1); + } + + if ((fpout = fopen(outname, "rb")) == NULL) + { + fprintf(STDERR, "Could not find file %s\n", outname); + FCLOSE(fpin); + return (1); + } + +#ifdef PNG_WRITE_SUPPORTED /* else nothing was written */ + { + int wrote_question = 0; + + for (;;) + { + png_size_t num_in, num_out; + char inbuf[256], outbuf[256]; + + + num_in = fread(inbuf, 1, sizeof inbuf, fpin); + num_out = fread(outbuf, 1, sizeof outbuf, fpout); + + if (num_in != num_out) + { + fprintf(STDERR, "\nFiles %s and %s are of a different size\n", + inname, outname); + + if (wrote_question == 0 && unsupported_chunks == 0) + { + fprintf(STDERR, + " Was %s written with the same maximum IDAT chunk size (%d bytes),", + inname, PNG_ZBUF_SIZE); + fprintf(STDERR, + "\n filtering heuristic (libpng default), compression"); + fprintf(STDERR, + " level (zlib default),\n and zlib version (%s)?\n\n", + ZLIB_VERSION); + wrote_question = 1; + } + + FCLOSE(fpin); + FCLOSE(fpout); + + if (strict != 0 && unsupported_chunks == 0) + return (1); + + else + return (0); + } + + if (!num_in) + break; + + if (memcmp(inbuf, outbuf, num_in)) + { + fprintf(STDERR, "\nFiles %s and %s are different\n", inname, + outname); + + if (wrote_question == 0 && unsupported_chunks == 0) + { + fprintf(STDERR, + " Was %s written with the same maximum IDAT chunk size (%d bytes),", + inname, PNG_ZBUF_SIZE); + fprintf(STDERR, + "\n filtering heuristic (libpng default), compression"); + fprintf(STDERR, + " level (zlib default),\n and zlib version (%s)?\n\n", + ZLIB_VERSION); + wrote_question = 1; + } + + FCLOSE(fpin); + FCLOSE(fpout); + + /* NOTE: the unsupported_chunks escape is permitted here because + * unsupported text chunk compression will result in the compression + * mode being changed (to NONE) yet, in the test case, the result + * can be exactly the same size! + */ + if (strict != 0 && unsupported_chunks == 0) + return (1); + + else + return (0); + } + } + } +#endif /* PNG_WRITE_SUPPORTED */ + + FCLOSE(fpin); + FCLOSE(fpout); + + return (0); +} + +/* Input and output filenames */ +#ifdef RISCOS +static PNG_CONST char *inname = "pngtest/png"; +static PNG_CONST char *outname = "pngout/png"; +#else +static PNG_CONST char *inname = "pngtest.png"; +static PNG_CONST char *outname = "pngout.png"; +#endif + +int +main(int argc, char *argv[]) +{ + int multiple = 0; + int ierror = 0; + + fprintf(STDERR, "\n Testing libpng version %s\n", PNG_LIBPNG_VER_STRING); + fprintf(STDERR, " with zlib version %s\n", ZLIB_VERSION); + fprintf(STDERR, "%s", png_get_copyright(NULL)); + /* Show the version of libpng used in building the library */ + fprintf(STDERR, " library (%lu):%s", + (unsigned long)png_access_version_number(), + png_get_header_version(NULL)); + + /* Show the version of libpng used in building the application */ + fprintf(STDERR, " pngtest (%lu):%s", (unsigned long)PNG_LIBPNG_VER, + PNG_HEADER_VERSION_STRING); + + /* Do some consistency checking on the memory allocation settings, I'm + * not sure this matters, but it is nice to know, the first of these + * tests should be impossible because of the way the macros are set + * in pngconf.h + */ +#if defined(MAXSEG_64K) && !defined(PNG_MAX_MALLOC_64K) + fprintf(STDERR, " NOTE: Zlib compiled for max 64k, libpng not\n"); +#endif + /* I think the following can happen. */ +#if !defined(MAXSEG_64K) && defined(PNG_MAX_MALLOC_64K) + fprintf(STDERR, " NOTE: libpng compiled for max 64k, zlib not\n"); +#endif + + if (strcmp(png_libpng_ver, PNG_LIBPNG_VER_STRING)) + { + fprintf(STDERR, + "Warning: versions are different between png.h and png.c\n"); + fprintf(STDERR, " png.h version: %s\n", PNG_LIBPNG_VER_STRING); + fprintf(STDERR, " png.c version: %s\n\n", png_libpng_ver); + ++ierror; + } + + if (argc > 1) + { + if (strcmp(argv[1], "-m") == 0) + { + multiple = 1; + status_dots_requested = 0; + } + + else if (strcmp(argv[1], "-mv") == 0 || + strcmp(argv[1], "-vm") == 0 ) + { + multiple = 1; + verbose = 1; + status_dots_requested = 1; + } + + else if (strcmp(argv[1], "-v") == 0) + { + verbose = 1; + status_dots_requested = 1; + inname = argv[2]; + } + + else if (strcmp(argv[1], "--strict") == 0) + { + status_dots_requested = 0; + verbose = 1; + inname = argv[2]; + strict++; + relaxed = 0; + } + + else if (strcmp(argv[1], "--relaxed") == 0) + { + status_dots_requested = 0; + verbose = 1; + inname = argv[2]; + strict = 0; + relaxed++; + } + + else + { + inname = argv[1]; + status_dots_requested = 0; + } + } + + if (!multiple && argc == 3 + verbose) + outname = argv[2 + verbose]; + + if ((!multiple && argc > 3 + verbose) || (multiple && argc < 2)) + { + fprintf(STDERR, + "usage: %s [infile.png] [outfile.png]\n\t%s -m {infile.png}\n", + argv[0], argv[0]); + fprintf(STDERR, + " reads/writes one PNG file (without -m) or multiple files (-m)\n"); + fprintf(STDERR, + " with -m %s is used as a temporary file\n", outname); + exit(1); + } + + if (multiple) + { + int i; +#if defined(PNG_USER_MEM_SUPPORTED) && PNG_DEBUG + int allocation_now = current_allocation; +#endif + for (i=2; isize, + (unsigned int)pinfo->pointer); + pinfo = pinfo->next; + } + } +#endif + } +#if defined(PNG_USER_MEM_SUPPORTED) && PNG_DEBUG + fprintf(STDERR, " Current memory allocation: %10d bytes\n", + current_allocation); + fprintf(STDERR, " Maximum memory allocation: %10d bytes\n", + maximum_allocation); + fprintf(STDERR, " Total memory allocation: %10d bytes\n", + total_allocation); + fprintf(STDERR, " Number of allocations: %10d\n", + num_allocations); +#endif + } + + else + { + int i; + for (i = 0; i<3; ++i) + { + int kerror; +#if defined(PNG_USER_MEM_SUPPORTED) && PNG_DEBUG + int allocation_now = current_allocation; +#endif + if (i == 1) + status_dots_requested = 1; + + else if (verbose == 0) + status_dots_requested = 0; + + if (i == 0 || verbose == 1 || ierror != 0) + fprintf(STDERR, "\n Testing %s:", inname); + + kerror = test_one_file(inname, outname); + + if (kerror == 0) + { + if (verbose == 1 || i == 2) + { +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED + int k; +#endif +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED + fprintf(STDERR, "\n PASS (%lu zero samples)\n", + (unsigned long)zero_samples); +#else + fprintf(STDERR, " PASS\n"); +#endif +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED + for (k = 0; k<256; k++) + if (filters_used[k]) + fprintf(STDERR, " Filter %d was used %lu times\n", + k, (unsigned long)filters_used[k]); +#endif +#ifdef PNG_TIME_RFC1123_SUPPORTED + if (tIME_chunk_present != 0) + fprintf(STDERR, " tIME = %s\n", tIME_string); +#endif /* PNG_TIME_RFC1123_SUPPORTED */ + } + } + + else + { + if (verbose == 0 && i != 2) + fprintf(STDERR, "\n Testing %s:", inname); + + fprintf(STDERR, " FAIL\n"); + ierror += kerror; + } +#if defined(PNG_USER_MEM_SUPPORTED) && PNG_DEBUG + if (allocation_now != current_allocation) + fprintf(STDERR, "MEMORY ERROR: %d bytes lost\n", + current_allocation - allocation_now); + + if (current_allocation != 0) + { + memory_infop pinfo = pinformation; + + fprintf(STDERR, "MEMORY ERROR: %d bytes still allocated\n", + current_allocation); + + while (pinfo != NULL) + { + fprintf(STDERR, " %lu bytes at %x\n", + (unsigned long)pinfo->size, (unsigned int)pinfo->pointer); + pinfo = pinfo->next; + } + } +#endif + } +#if defined(PNG_USER_MEM_SUPPORTED) && PNG_DEBUG + fprintf(STDERR, " Current memory allocation: %10d bytes\n", + current_allocation); + fprintf(STDERR, " Maximum memory allocation: %10d bytes\n", + maximum_allocation); + fprintf(STDERR, " Total memory allocation: %10d bytes\n", + total_allocation); + fprintf(STDERR, " Number of allocations: %10d\n", + num_allocations); +#endif + } + +#ifdef PNGTEST_TIMING + t_stop = (float)clock(); + t_misc += (t_stop - t_start); + t_start = t_stop; + fprintf(STDERR, " CPU time used = %.3f seconds", + (t_misc+t_decode+t_encode)/(float)CLOCKS_PER_SEC); + fprintf(STDERR, " (decoding %.3f,\n", + t_decode/(float)CLOCKS_PER_SEC); + fprintf(STDERR, " encoding %.3f ,", + t_encode/(float)CLOCKS_PER_SEC); + fprintf(STDERR, " other %.3f seconds)\n\n", + t_misc/(float)CLOCKS_PER_SEC); +#endif + + if (ierror == 0) + fprintf(STDERR, " libpng passes test\n"); + + else + fprintf(STDERR, " libpng FAILS test\n"); + + return (int)(ierror != 0); +} +#else +int +main(void) +{ + fprintf(STDERR, + " test ignored because libpng was not built with read support\n"); + /* And skip this test */ + return 77; +} +#endif + +/* Generate a compiler error if there is an old png.h in the search path. */ +typedef png_libpng_version_1_6_2 Your_png_h_is_not_version_1_6_2; diff --git a/src/SDL2/external/libpng-1.6.2/pngtest.png b/src/SDL2/external/libpng-1.6.2/pngtest.png new file mode 100644 index 0000000000000000000000000000000000000000..cb3fef4cf844324953cc45f21b479a338cb9c288 GIT binary patch literal 8695 zcmVy!Wh04#7r zK}=$AXLWNRb#7^Na{vGU00000|Nj62W^ZpVVqtOsF)lD=FaS0+E;TbXWiwYmdmI1& z01|UUK}-QMGc-0gMJ+ip05dT(F*ZduSlHFikA^FNzj*b{^&1C0y8`&+Xt>IiFrGR9x&RM` z#d+oH(XeM2U%ICvqn#2u*g>ce|htbC!_xPr2O(10B6Ss zt9kjw&gU;*43^7`d`CX(+??~wd5YZd`1zzWJvmyPPcE61ZZ>ye0IeFU`dWp)cKqK@ zPgb+Z6k`PAb>H;#YFOmgItMUXxbihWdwM!<8b+aApr(PIHEEOOI-^}M_KfCqQXUTX z3>S0P=@*7bWbVTC9go@_cz%5FMxFl!Kx}^w;PB~1=i93JokfJam#fi1&-(TMb>H@d zyX2Fj;VJ@;+f90O&|5j@QIa7d#2cIS)+s$dK3IKnG+doLxZaB=NBz~=4LzMrudqr1 z=}`8KMkFJ|hAKqHGuOFu@Tv1muRLYt`Q&K0>KFOS`^a?e`1GSu`hiG=2sT$MYZaLY zlesehO2MOp-s)f5&)yo`wCnHdhyWQdcY#Y^b2gcCc05|mUDcb;OZrw*RRJZ!LBH@y zG(_+|+^rUXfi)N{TwFS=(O4rGm62t_(bKUxKR)or2+wD((=-r?6h_bjh0QTqD68=L z;DymlT(W@D-o@#p>0VN-+|$l0`feej-DqbH;O>R&$^t&R_R=K$mR)r{tP7bz`+WSpoT z^ox~bg7bkY)I`A7_4s0bhiy3;7Ux$!a5^a&_U!1a)yNp($x(l;2J3y`LBCj4 zp=RGIO6QrBRp(;vI%O3O*Xp}9xNp+GSq82OhzO&8;Y(km$T%AIPUbEghS)H#JWWhC z$c5M`a&^9rKF*I1R#R6^Zw+p;bfoJ#;(U#6SG|dmi%ZAxXmFhVhGAjZvzizq!y;c< zqc^dH00Wy3ZVj%lcMw_$m#(4;5oMXF!R!F;;0ZBLftSZk|kXKKodcUyfSzdru#PMqk{oY zCnYY_tkqz&aCFe~AD>MJ_xCMEU{Y3{^O>VC8s9{$5p)Jf#46ptHTe0|oe1#Z^9i{K z)@ZaAs-~%$CV6}p!pzt8#!Jpz)rk=v4hldJ5eC-q;qzp2Z-$kXkYSbHEKJi-os8!_ zqXl2b8NlP`vySuiW_=z$yXZ_yKhu)2Z*_J5MyPSi`$xcPX=f%ppUurd&z>VNnY+!7 zD625O`MswX^8t6rt>dqGo8vKX*DQ5APc6t#W>Ruv*8#zgJNr z|2aKTk*n9Ti9dXR`W|wAe6T7*4GmbW5rNXx^a{iMpN((L^}S=vW)LVBacYjIWLN2i174q`z;?bXZu77EUK+H7Qd# z3@NuA?pp+yTsk5RN|Nn~L}E-iaADNuM6cyrYy6;R{lkIHecfP<=E-<^ICr=0jnT=b zmz76p%X-pEWOO*N=c9f>h>_FDB|?T0O^9j203zvfKA?m=#B1}jnRvUD=XHowb%O}h zF;cp~zRl?uhPm_j7#UC9;lpe&~B?4W0 zQ3@X-qn@P-fjSBwo?g3(evz*-;G?5Mo}FC~VuO;5L6Ot5h8QFF-;l-jZ9cl+x6gzu zFRU;x>)FTS*=^6fmJq1~*f;vtq|?hts2dLUaxQ&MjNq$)QNq)UIU<5qaQ@NJDp$#N zhdQ=+O-&$qdPwfhRS_2=!y-jeqn=%@Umx`BN~`SrvaIsLDnf{?Cw=F{0i=z(xN(}V ze2uFcB!kdEN(;HUAStI#K-KYEC%zWnM9Mni>PQBtEW;?xrK{){mO){#xhD8#lj_f1 z#o+O2C)OT=@1Gry&Qoj_u}X+B5{X>83g>I85XqI^!~-IN*6EV=@2YMnaz$a(+coZd zJ%eP13ZpnEa*jv)#0Ji$C9Y}+u|`PPL}4{Xbc!A$SS6!}PcJ%GuEK}F!@(ZDj`$Fn zI)CV^hPkhCA?4S@J%iR@P15mt!a8dM`49*(V$^jEedoj{m+mCSNG3@`ld|ID=TpvR zS4bvUl}wk`f=2K@(rX<>VHN$toCEyb>7)~5tVCeApJQ{O3UNGhRmWAKQ@VQA#E4Ns zVGJN-S+Ztz9T5?%QuM9Chuco*jSeWGKn-UTN0Dd5m^6`PDGk&a)D46fXLW2&?icpl z$ABQMZ7w%s7r7c84foI6$oaM36v&@E=zGH?KRak7W$ln>EeHRfSKj_)xpC7%B ztUns|rYe*CY;r}eGD1ulj@H7bmmUH3t-giQ{6V+J*`tFMl0woD;q>D2mS?m|j)y(d z7m*ZAhKN!vK-m^JW>=oxo*BR$pzj|-KD{jYbXwvAd^&YZ%F5h$JOAk6-~`~Tg$<3l z_MGd4*oBCB#e#e*P1{`cKf1p^u9_zATf={Q1=G0xVUX5^zX~CYde(zbhe#D_v}Bua zg~+XhxODZc?|v&y`zpB7*SXaha~IxP0u3>e2~3^e?8{NluCz`eZqMKRq6; zLJZWg!Pk*}YnaR(bpsCv79Uc=HMw%tcyzc)zWV1c)KOJ`-KAUtRV2$RYop6Ye@!YXz6|sTA zUYAp985Rp}>d8CwH(D1n@DEi3n z^=v*J7Wrz_FIIcTOhaG;D`YqFh}R}vhcub}J%!dOQ%)-o$W4axH4WFfNT?gKOn5q; z5@W-j(OiD=XtPb$yoowSBop?n!Ke(ak}-TZDEzRnt3hGTjmr9v5o1JJr*v6*VgtE) zOD)vZ;S9k0lu9+N#zSn#ZhTHjdQY;9rinD9Bo!L!0R6)D0j_*H+*$;iXQ@~vf(v!B z$HWcQ1i1A&0NWK7G7D<8-N zE>0dz0kkA?fDjQ9IVMR)9a2Vr6Los^iZQu%=if5vwPSL1q;A?6Ac7AKJ*#oPL1nOK z6k0US*N8xj4N42M(m|}boR^#&9Zap!uXQ4QS;42I3WXaW0_yG z9?pkpCT)ftujw5|Wt2XWn+)r8o4Kbc=u8Nqq4G7k(oCTWDlsVIq;uA9rawM5-nxYhl`AUj&BMqBP9Q8f#SIy1b$wB^i;(ilgiC7=8wENP(uEm(lL3yJ2t6y zuXS?8Rftp}kSoFDY6JfJ7~LBuZF5EGYD^|vI!}y=u9q|$Tdk%gj4`&L`L#WDzTSAn z()qD5k_ZUaY{JtB)$>`|nLA&tfqtvhX4~Z|jn$;6f{VF(8e2^8&PmT*pl6er5)q0# zx!}Smbe3pv=>Q6+ld@y-WNno|-9&td)Ad--Cgq`!Ox8`uasB?>#HOigz?zJGt0{7Y z)f%f58E`teI=or8d_#$YS?MD^Yc?5$)oJPLmLVa)vx~WbWWIEkB0{SbA>Iyv9-mDI zv4MSS?j*22em*nL#Rwqr{dhdWY7?jrdnp;%Gdgh?oqr?r`|mD(=a}Kdh!0$n%_b0oV3yUkQfQ=?$DWVe(4Txa)1ElE{tC-{C^kn+NAqM ze)8y`IF1pV_p|Y(J9(7>^+zXn(RcnVf0jSXx0PJU=s~~mkA}thH+}Yxrtx(XY?XpL4vbdig>8@!5dtfgnwd6ApZuxDHDY9urbr4PiI zP{v&J2G(5z?U6{Vuc6=@_rlb9BujR`e1j?ZPL=&=*qaUu(^oANR>w%?8?+Wq9t_VX zb2t0h8~R0F6S-N^7OD`iEh%{F{L{M>twct{!kmi;hXafAkv*gFA#zzJzqYO_ua#Uk zEjK(uD&AxpT<0c|7Gk9IH9cz%f3M2UmGrfU=~+Fvzi%J5Kb>DWUxmnYa^+6$`oU+D z`QUUi&xbubS0edv&yeekx=tA6uxI;PiGMPl^zH==MlytJ1WnonaCJTQA)JKB?BdN91bBn8 zl}K)s40={S+%sx)a|x|Z^#C6tv1xEVbs6L;*##HksL1t*7DF9R-FPy0kJjKsgzBR0 z7_LHnJ{sfIFkShE++?YvB2`#t-p5-&%Y(i>AMDwYT^AGEMXF-M z*{9{de`rN8~Mi2ugKMCG%U__wl2$obM=OY)ZEwzRY)}a;l4#F!B>IM zeqibEj3<1H9lPG3!#(rR3I`I zWoVLT-?!#ODM4wdV-rCZ z)(~Q94nb0lHMC5T!ltIi<_7P*YU1&mA{R)GRRn8|dYnO?E6x4=#Cobj#I$L=kZN&N zhZ{8J2FZmA>v6*BR6+-(^hZR(zD>}RD8B3qi0j+O^k3AlG0_} zE7LX%W?AHPGH1A#THt($m|UT9$xn|*{@KOsa58tdZXndrsZ8>9D{~?-wd)m|c1l93 zBxDdFGl?0vXB1a1pfVX0xq2*_478BTjq3NBR!G*LD+vI9f z3tY=PrRyKu(?8uoikBfG*%n^|aS_ROge+So$CD*95|&@FSVnfYxB0+mmYojOi&U5X z&5H#hu)`K+H#w|s7q+@xUPf5P2+Jk^_PJ+C#O&@6BmBTCyqZbi1%vEcu%F zljU+*nC)zv?$)h)?{;s#-eL)KmupsK+O09d2X>dZh=h8{?oO9~{#E%8uj=ug7?ZB5 z&kCz4tlq5hHIWPInhjGX5d<`KNZm+UNL;C=!G{`G)ws}bS*FH{HHFja6mFGOIxeNF znO^$jBYcf%2?zK4y<`9BCz~fQtey7y^_nPYl-_i*Cl*A@`Dqg&eIvDBe|K{(Tbk)6 zzP|CA8=qVMm#YIIv`tYo_;_~{_B$y%HtFU|SEr+tWoQkFMG`m3g-D`5RV}Gk0Oy-T z=&b^=S@XH#hUKF^;?I**ZvbB@}({Oac)t%^MFhY-)KNz4o_ z8JAZM?`!h*`9n7^NakasteBWgxl&~9lC5zNB`M|>mFO#K&Eet3CD(m+zK-NdP?;vw zk;8$##d?KzG$T9PqKTb69m?QXH4p;^L~WbAHl@#7D2_U~!jiyFS}z}6Q2MPyq#>}sJ) z7roPkWtZg=7I9hK+uqrJxmZw#$W|9(T&4v9eqeU)olQO)mQ_8w|6j~czgjGaOMoT! zc6WZVv)$$MFJI7=EtV}4XIF&(_1Whv=@6H#?QO5^?JiqO&^qIbu)u70S<Te zTkW-6zOIWbgRLcOW!Im}wqP5fyVXH&3tGhO%F{}Jh5|EjgOvPm`ns8 z0;Zi`|_r_tZ9acbC8YVd_EdF1OG-!ad#P zSD$(QrTmgFLj;!iMZ<4nhwW|x-?z4siJ-fL<#O@Y_jb2+wnga|$v*A~FY6SYd|(t> zwscvAU&JMg@vlGs$DUPxlWk@9%yyTTbwp)b{OE&wIKN<5!%jEj?BB}6|5Js3SS;c{ z{pbVpKkn^j+sogA&?UsLu|{)G2_Y`YvM$RmxN1RMF4@hxhzQ#P(uEM0tT(yLvgCbN5ei$>P10ZFYC={q5l1PdeQtFJCmgSVVsFa=~X`yyP=q z@vE}p#Uk>VtGFn?z%LdomrHiKTXehd1HFTEyDXMVmMqab+mK8M(v|J33p?2sFBg%m ztuBi?vMs{y?l#*3i%9Xoy`8@=zf44?UzOEqTrPKhWOoNI7b#49v55TWgIyMN2cx%{ zfBwa+TEub*i_fd@wEQys<03A9`NMnqeplEozX<%$?()?FcDErcIut(;mUO9?OBTxo z9l*U4d2_z_`c3?FBf#_@-lwKS8+)d0wKb^?PR;ZuXk9oBnFb=ce?CkUG&yA zaT(d#f?d5$r;~QWqIFS&37t+d{$Y_Ig%^uR=j$ck+Z6`IJ(gcD>2AS}bouAWzd!!fAVlJU6-C*T{9_t`#6FG0u}k1+a8JGx@!(@V<>CeSCh=&^vXXjjOO96I9d1T zWbGr4gcQf>OgNw3T@VlO@qlYV$;kXKc9UgJ}!`-91Xn|p^g#XH0d1x!oRL7bhQw7bOd=xNmLB`*r5it=-Tm05cgC|_2s4BYGPiFHF2v2_HeyVr zBxyOfqNU~G%BGBzo~xA}_olT#9jeo|(J4az2ofQ<3Y%Crk&%VEiPf9%ix^WM{>g*> zRLJ`4N24j7*>}0O$huV?Mm>8n*w2qs%&&>SzDZAKuqGjs2fc(cmc9l7=fdpCcsBYb z4F0_ezDNDy{9s^5B7$>)dFAmwZgy~LkGQVY(UR`7_L%`8#`V9|`P7YGRo>4ZrKYTT z=}Fa`l%-lDT+IE`xvO4F6ke5so;?}v=f^ZqSi{4oWAjZ)c#|k09~SnpP6?9Tx5`Y* zYC8Az`M052zE`D2G8{1_3&sd!1|en6>jr_FiY7}(EoE0AQJ6bFzDa)Fj4kA$ecX|> z3scvLKH36?`BHA3wf`dUDwfBl~_Pl33--r)m(RwSfh~E&Q>9j<*N{xT)M-% z9xDP#(f9Z5)VA#fbxcLrOJ8pat5^QbRPVRRho=+s&7b=2#|m| zZ>u#C!PVhbr|+whE9oB%i)lvk>HyPAKh_ycuKZby(cjf?`ll-I@=E zrH?3`5Wx^5zKNJNjek>^_MchaIjQMcb#nYS`=>7#5hId-_pg@;{0DY-1(wU%=U>#n z82|b=|1~a`U;Y8-{U<5kxU)xndp@xF$mk4LH?vDuP3NvY_aV5qQ4Rhqugm`fNI@&~ z^&rlb0002SdQ@0+L}hbha%pgMX>V=-00@~)%Rx%SKoAAceNOS03Nv9q@C4#c9pVtz zJ>5S^K~mLpRYr1qx4!)wsD+IM_XAfp7Y}MCY{Domrg)0&8ACd7YbmpJBb$pUUi!-k zyNk|B4iuw9El{K}uW`WlTCD{{ zgKbTj1-3`sj!9NxNsc?I$fggrU_ls?{$H}CnRrM->Z*C1YqLyu(HS1B{U2@! VS0jWSKIQ-b002ovPDHLkV1k2400;m8 literal 0 HcmV?d00001 diff --git a/src/SDL2/external/libpng-1.6.2/pngtrans.c b/src/SDL2/external/libpng-1.6.2/pngtrans.c new file mode 100644 index 000000000..8f8bc5d9e --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngtrans.c @@ -0,0 +1,841 @@ + +/* pngtrans.c - transforms the data in a row (used by both readers and writers) + * + * Last changed in libpng 1.6.2 [April 25, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +#include "pngpriv.h" + +#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) + +#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) +/* Turn on BGR-to-RGB mapping */ +void PNGAPI +png_set_bgr(png_structrp png_ptr) +{ + png_debug(1, "in png_set_bgr"); + + if (png_ptr == NULL) + return; + + png_ptr->transformations |= PNG_BGR; +} +#endif + +#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) +/* Turn on 16 bit byte swapping */ +void PNGAPI +png_set_swap(png_structrp png_ptr) +{ + png_debug(1, "in png_set_swap"); + + if (png_ptr == NULL) + return; + + if (png_ptr->bit_depth == 16) + png_ptr->transformations |= PNG_SWAP_BYTES; +} +#endif + +#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED) +/* Turn on pixel packing */ +void PNGAPI +png_set_packing(png_structrp png_ptr) +{ + png_debug(1, "in png_set_packing"); + + if (png_ptr == NULL) + return; + + if (png_ptr->bit_depth < 8) + { + png_ptr->transformations |= PNG_PACK; + png_ptr->usr_bit_depth = 8; + } +} +#endif + +#if defined(PNG_READ_PACKSWAP_SUPPORTED)||defined(PNG_WRITE_PACKSWAP_SUPPORTED) +/* Turn on packed pixel swapping */ +void PNGAPI +png_set_packswap(png_structrp png_ptr) +{ + png_debug(1, "in png_set_packswap"); + + if (png_ptr == NULL) + return; + + if (png_ptr->bit_depth < 8) + png_ptr->transformations |= PNG_PACKSWAP; +} +#endif + +#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) +void PNGAPI +png_set_shift(png_structrp png_ptr, png_const_color_8p true_bits) +{ + png_debug(1, "in png_set_shift"); + + if (png_ptr == NULL) + return; + + png_ptr->transformations |= PNG_SHIFT; + png_ptr->shift = *true_bits; +} +#endif + +#if defined(PNG_READ_INTERLACING_SUPPORTED) || \ + defined(PNG_WRITE_INTERLACING_SUPPORTED) +int PNGAPI +png_set_interlace_handling(png_structrp png_ptr) +{ + png_debug(1, "in png_set_interlace handling"); + + if (png_ptr && png_ptr->interlaced) + { + png_ptr->transformations |= PNG_INTERLACE; + return (7); + } + + return (1); +} +#endif + +#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) +/* Add a filler byte on read, or remove a filler or alpha byte on write. + * The filler type has changed in v0.95 to allow future 2-byte fillers + * for 48-bit input data, as well as to avoid problems with some compilers + * that don't like bytes as parameters. + */ +void PNGAPI +png_set_filler(png_structrp png_ptr, png_uint_32 filler, int filler_loc) +{ + png_debug(1, "in png_set_filler"); + + if (png_ptr == NULL) + return; + + /* In libpng 1.6 it is possible to determine whether this is a read or write + * operation and therefore to do more checking here for a valid call. + */ + if (png_ptr->mode & PNG_IS_READ_STRUCT) + { +# ifdef PNG_READ_FILLER_SUPPORTED + /* On read png_set_filler is always valid, regardless of the base PNG + * format, because other transformations can give a format where the + * filler code can execute (basically an 8 or 16-bit component RGB or G + * format.) + * + * NOTE: usr_channels is not used by the read code! (This has led to + * confusion in the past.) The filler is only used in the read code. + */ + png_ptr->filler = (png_uint_16)filler; +# else + png_app_error(png_ptr, "png_set_filler not supported on read"); + PNG_UNUSED(filler) /* not used in the write case */ + return; +# endif + } + + else /* write */ + { +# ifdef PNG_WRITE_FILLER_SUPPORTED + /* On write the usr_channels parameter must be set correctly at the + * start to record the number of channels in the app-supplied data. + */ + switch (png_ptr->color_type) + { + case PNG_COLOR_TYPE_RGB: + png_ptr->usr_channels = 4; + break; + + case PNG_COLOR_TYPE_GRAY: + if (png_ptr->bit_depth >= 8) + { + png_ptr->usr_channels = 2; + break; + } + + else + { + /* There simply isn't any code in libpng to strip out bits + * from bytes when the components are less than a byte in + * size! + */ + png_app_error(png_ptr, + "png_set_filler is invalid for low bit depth gray output"); + return; + } + + default: + png_app_error(png_ptr, + "png_set_filler: inappropriate color type"); + return; + } +# else + png_app_error(png_ptr, "png_set_filler not supported on write"); + return; +# endif + } + + /* Here on success - libpng supports the operation, set the transformation + * and the flag to say where the filler channel is. + */ + png_ptr->transformations |= PNG_FILLER; + + if (filler_loc == PNG_FILLER_AFTER) + png_ptr->flags |= PNG_FLAG_FILLER_AFTER; + + else + png_ptr->flags &= ~PNG_FLAG_FILLER_AFTER; +} + +/* Added to libpng-1.2.7 */ +void PNGAPI +png_set_add_alpha(png_structrp png_ptr, png_uint_32 filler, int filler_loc) +{ + png_debug(1, "in png_set_add_alpha"); + + if (png_ptr == NULL) + return; + + png_set_filler(png_ptr, filler, filler_loc); + /* The above may fail to do anything. */ + if (png_ptr->transformations & PNG_FILLER) + png_ptr->transformations |= PNG_ADD_ALPHA; +} + +#endif + +#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED) +void PNGAPI +png_set_swap_alpha(png_structrp png_ptr) +{ + png_debug(1, "in png_set_swap_alpha"); + + if (png_ptr == NULL) + return; + + png_ptr->transformations |= PNG_SWAP_ALPHA; +} +#endif + +#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED) +void PNGAPI +png_set_invert_alpha(png_structrp png_ptr) +{ + png_debug(1, "in png_set_invert_alpha"); + + if (png_ptr == NULL) + return; + + png_ptr->transformations |= PNG_INVERT_ALPHA; +} +#endif + +#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) +void PNGAPI +png_set_invert_mono(png_structrp png_ptr) +{ + png_debug(1, "in png_set_invert_mono"); + + if (png_ptr == NULL) + return; + + png_ptr->transformations |= PNG_INVERT_MONO; +} + +/* Invert monochrome grayscale data */ +void /* PRIVATE */ +png_do_invert(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_invert"); + + /* This test removed from libpng version 1.0.13 and 1.2.0: + * if (row_info->bit_depth == 1 && + */ + if (row_info->color_type == PNG_COLOR_TYPE_GRAY) + { + png_bytep rp = row; + png_size_t i; + png_size_t istop = row_info->rowbytes; + + for (i = 0; i < istop; i++) + { + *rp = (png_byte)(~(*rp)); + rp++; + } + } + + else if (row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA && + row_info->bit_depth == 8) + { + png_bytep rp = row; + png_size_t i; + png_size_t istop = row_info->rowbytes; + + for (i = 0; i < istop; i += 2) + { + *rp = (png_byte)(~(*rp)); + rp += 2; + } + } + +#ifdef PNG_16BIT_SUPPORTED + else if (row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA && + row_info->bit_depth == 16) + { + png_bytep rp = row; + png_size_t i; + png_size_t istop = row_info->rowbytes; + + for (i = 0; i < istop; i += 4) + { + *rp = (png_byte)(~(*rp)); + *(rp + 1) = (png_byte)(~(*(rp + 1))); + rp += 4; + } + } +#endif +} +#endif + +#ifdef PNG_16BIT_SUPPORTED +#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) +/* Swaps byte order on 16 bit depth images */ +void /* PRIVATE */ +png_do_swap(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_swap"); + + if (row_info->bit_depth == 16) + { + png_bytep rp = row; + png_uint_32 i; + png_uint_32 istop= row_info->width * row_info->channels; + + for (i = 0; i < istop; i++, rp += 2) + { + png_byte t = *rp; + *rp = *(rp + 1); + *(rp + 1) = t; + } + } +} +#endif +#endif + +#if defined(PNG_READ_PACKSWAP_SUPPORTED)||defined(PNG_WRITE_PACKSWAP_SUPPORTED) +static PNG_CONST png_byte onebppswaptable[256] = { + 0x00, 0x80, 0x40, 0xC0, 0x20, 0xA0, 0x60, 0xE0, + 0x10, 0x90, 0x50, 0xD0, 0x30, 0xB0, 0x70, 0xF0, + 0x08, 0x88, 0x48, 0xC8, 0x28, 0xA8, 0x68, 0xE8, + 0x18, 0x98, 0x58, 0xD8, 0x38, 0xB8, 0x78, 0xF8, + 0x04, 0x84, 0x44, 0xC4, 0x24, 0xA4, 0x64, 0xE4, + 0x14, 0x94, 0x54, 0xD4, 0x34, 0xB4, 0x74, 0xF4, + 0x0C, 0x8C, 0x4C, 0xCC, 0x2C, 0xAC, 0x6C, 0xEC, + 0x1C, 0x9C, 0x5C, 0xDC, 0x3C, 0xBC, 0x7C, 0xFC, + 0x02, 0x82, 0x42, 0xC2, 0x22, 0xA2, 0x62, 0xE2, + 0x12, 0x92, 0x52, 0xD2, 0x32, 0xB2, 0x72, 0xF2, + 0x0A, 0x8A, 0x4A, 0xCA, 0x2A, 0xAA, 0x6A, 0xEA, + 0x1A, 0x9A, 0x5A, 0xDA, 0x3A, 0xBA, 0x7A, 0xFA, + 0x06, 0x86, 0x46, 0xC6, 0x26, 0xA6, 0x66, 0xE6, + 0x16, 0x96, 0x56, 0xD6, 0x36, 0xB6, 0x76, 0xF6, + 0x0E, 0x8E, 0x4E, 0xCE, 0x2E, 0xAE, 0x6E, 0xEE, + 0x1E, 0x9E, 0x5E, 0xDE, 0x3E, 0xBE, 0x7E, 0xFE, + 0x01, 0x81, 0x41, 0xC1, 0x21, 0xA1, 0x61, 0xE1, + 0x11, 0x91, 0x51, 0xD1, 0x31, 0xB1, 0x71, 0xF1, + 0x09, 0x89, 0x49, 0xC9, 0x29, 0xA9, 0x69, 0xE9, + 0x19, 0x99, 0x59, 0xD9, 0x39, 0xB9, 0x79, 0xF9, + 0x05, 0x85, 0x45, 0xC5, 0x25, 0xA5, 0x65, 0xE5, + 0x15, 0x95, 0x55, 0xD5, 0x35, 0xB5, 0x75, 0xF5, + 0x0D, 0x8D, 0x4D, 0xCD, 0x2D, 0xAD, 0x6D, 0xED, + 0x1D, 0x9D, 0x5D, 0xDD, 0x3D, 0xBD, 0x7D, 0xFD, + 0x03, 0x83, 0x43, 0xC3, 0x23, 0xA3, 0x63, 0xE3, + 0x13, 0x93, 0x53, 0xD3, 0x33, 0xB3, 0x73, 0xF3, + 0x0B, 0x8B, 0x4B, 0xCB, 0x2B, 0xAB, 0x6B, 0xEB, + 0x1B, 0x9B, 0x5B, 0xDB, 0x3B, 0xBB, 0x7B, 0xFB, + 0x07, 0x87, 0x47, 0xC7, 0x27, 0xA7, 0x67, 0xE7, + 0x17, 0x97, 0x57, 0xD7, 0x37, 0xB7, 0x77, 0xF7, + 0x0F, 0x8F, 0x4F, 0xCF, 0x2F, 0xAF, 0x6F, 0xEF, + 0x1F, 0x9F, 0x5F, 0xDF, 0x3F, 0xBF, 0x7F, 0xFF +}; + +static PNG_CONST png_byte twobppswaptable[256] = { + 0x00, 0x40, 0x80, 0xC0, 0x10, 0x50, 0x90, 0xD0, + 0x20, 0x60, 0xA0, 0xE0, 0x30, 0x70, 0xB0, 0xF0, + 0x04, 0x44, 0x84, 0xC4, 0x14, 0x54, 0x94, 0xD4, + 0x24, 0x64, 0xA4, 0xE4, 0x34, 0x74, 0xB4, 0xF4, + 0x08, 0x48, 0x88, 0xC8, 0x18, 0x58, 0x98, 0xD8, + 0x28, 0x68, 0xA8, 0xE8, 0x38, 0x78, 0xB8, 0xF8, + 0x0C, 0x4C, 0x8C, 0xCC, 0x1C, 0x5C, 0x9C, 0xDC, + 0x2C, 0x6C, 0xAC, 0xEC, 0x3C, 0x7C, 0xBC, 0xFC, + 0x01, 0x41, 0x81, 0xC1, 0x11, 0x51, 0x91, 0xD1, + 0x21, 0x61, 0xA1, 0xE1, 0x31, 0x71, 0xB1, 0xF1, + 0x05, 0x45, 0x85, 0xC5, 0x15, 0x55, 0x95, 0xD5, + 0x25, 0x65, 0xA5, 0xE5, 0x35, 0x75, 0xB5, 0xF5, + 0x09, 0x49, 0x89, 0xC9, 0x19, 0x59, 0x99, 0xD9, + 0x29, 0x69, 0xA9, 0xE9, 0x39, 0x79, 0xB9, 0xF9, + 0x0D, 0x4D, 0x8D, 0xCD, 0x1D, 0x5D, 0x9D, 0xDD, + 0x2D, 0x6D, 0xAD, 0xED, 0x3D, 0x7D, 0xBD, 0xFD, + 0x02, 0x42, 0x82, 0xC2, 0x12, 0x52, 0x92, 0xD2, + 0x22, 0x62, 0xA2, 0xE2, 0x32, 0x72, 0xB2, 0xF2, + 0x06, 0x46, 0x86, 0xC6, 0x16, 0x56, 0x96, 0xD6, + 0x26, 0x66, 0xA6, 0xE6, 0x36, 0x76, 0xB6, 0xF6, + 0x0A, 0x4A, 0x8A, 0xCA, 0x1A, 0x5A, 0x9A, 0xDA, + 0x2A, 0x6A, 0xAA, 0xEA, 0x3A, 0x7A, 0xBA, 0xFA, + 0x0E, 0x4E, 0x8E, 0xCE, 0x1E, 0x5E, 0x9E, 0xDE, + 0x2E, 0x6E, 0xAE, 0xEE, 0x3E, 0x7E, 0xBE, 0xFE, + 0x03, 0x43, 0x83, 0xC3, 0x13, 0x53, 0x93, 0xD3, + 0x23, 0x63, 0xA3, 0xE3, 0x33, 0x73, 0xB3, 0xF3, + 0x07, 0x47, 0x87, 0xC7, 0x17, 0x57, 0x97, 0xD7, + 0x27, 0x67, 0xA7, 0xE7, 0x37, 0x77, 0xB7, 0xF7, + 0x0B, 0x4B, 0x8B, 0xCB, 0x1B, 0x5B, 0x9B, 0xDB, + 0x2B, 0x6B, 0xAB, 0xEB, 0x3B, 0x7B, 0xBB, 0xFB, + 0x0F, 0x4F, 0x8F, 0xCF, 0x1F, 0x5F, 0x9F, 0xDF, + 0x2F, 0x6F, 0xAF, 0xEF, 0x3F, 0x7F, 0xBF, 0xFF +}; + +static PNG_CONST png_byte fourbppswaptable[256] = { + 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70, + 0x80, 0x90, 0xA0, 0xB0, 0xC0, 0xD0, 0xE0, 0xF0, + 0x01, 0x11, 0x21, 0x31, 0x41, 0x51, 0x61, 0x71, + 0x81, 0x91, 0xA1, 0xB1, 0xC1, 0xD1, 0xE1, 0xF1, + 0x02, 0x12, 0x22, 0x32, 0x42, 0x52, 0x62, 0x72, + 0x82, 0x92, 0xA2, 0xB2, 0xC2, 0xD2, 0xE2, 0xF2, + 0x03, 0x13, 0x23, 0x33, 0x43, 0x53, 0x63, 0x73, + 0x83, 0x93, 0xA3, 0xB3, 0xC3, 0xD3, 0xE3, 0xF3, + 0x04, 0x14, 0x24, 0x34, 0x44, 0x54, 0x64, 0x74, + 0x84, 0x94, 0xA4, 0xB4, 0xC4, 0xD4, 0xE4, 0xF4, + 0x05, 0x15, 0x25, 0x35, 0x45, 0x55, 0x65, 0x75, + 0x85, 0x95, 0xA5, 0xB5, 0xC5, 0xD5, 0xE5, 0xF5, + 0x06, 0x16, 0x26, 0x36, 0x46, 0x56, 0x66, 0x76, + 0x86, 0x96, 0xA6, 0xB6, 0xC6, 0xD6, 0xE6, 0xF6, + 0x07, 0x17, 0x27, 0x37, 0x47, 0x57, 0x67, 0x77, + 0x87, 0x97, 0xA7, 0xB7, 0xC7, 0xD7, 0xE7, 0xF7, + 0x08, 0x18, 0x28, 0x38, 0x48, 0x58, 0x68, 0x78, + 0x88, 0x98, 0xA8, 0xB8, 0xC8, 0xD8, 0xE8, 0xF8, + 0x09, 0x19, 0x29, 0x39, 0x49, 0x59, 0x69, 0x79, + 0x89, 0x99, 0xA9, 0xB9, 0xC9, 0xD9, 0xE9, 0xF9, + 0x0A, 0x1A, 0x2A, 0x3A, 0x4A, 0x5A, 0x6A, 0x7A, + 0x8A, 0x9A, 0xAA, 0xBA, 0xCA, 0xDA, 0xEA, 0xFA, + 0x0B, 0x1B, 0x2B, 0x3B, 0x4B, 0x5B, 0x6B, 0x7B, + 0x8B, 0x9B, 0xAB, 0xBB, 0xCB, 0xDB, 0xEB, 0xFB, + 0x0C, 0x1C, 0x2C, 0x3C, 0x4C, 0x5C, 0x6C, 0x7C, + 0x8C, 0x9C, 0xAC, 0xBC, 0xCC, 0xDC, 0xEC, 0xFC, + 0x0D, 0x1D, 0x2D, 0x3D, 0x4D, 0x5D, 0x6D, 0x7D, + 0x8D, 0x9D, 0xAD, 0xBD, 0xCD, 0xDD, 0xED, 0xFD, + 0x0E, 0x1E, 0x2E, 0x3E, 0x4E, 0x5E, 0x6E, 0x7E, + 0x8E, 0x9E, 0xAE, 0xBE, 0xCE, 0xDE, 0xEE, 0xFE, + 0x0F, 0x1F, 0x2F, 0x3F, 0x4F, 0x5F, 0x6F, 0x7F, + 0x8F, 0x9F, 0xAF, 0xBF, 0xCF, 0xDF, 0xEF, 0xFF +}; + +/* Swaps pixel packing order within bytes */ +void /* PRIVATE */ +png_do_packswap(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_packswap"); + + if (row_info->bit_depth < 8) + { + png_bytep rp; + png_const_bytep end, table; + + end = row + row_info->rowbytes; + + if (row_info->bit_depth == 1) + table = onebppswaptable; + + else if (row_info->bit_depth == 2) + table = twobppswaptable; + + else if (row_info->bit_depth == 4) + table = fourbppswaptable; + + else + return; + + for (rp = row; rp < end; rp++) + *rp = table[*rp]; + } +} +#endif /* PNG_READ_PACKSWAP_SUPPORTED or PNG_WRITE_PACKSWAP_SUPPORTED */ + +#if defined(PNG_WRITE_FILLER_SUPPORTED) || \ + defined(PNG_READ_STRIP_ALPHA_SUPPORTED) +/* Remove a channel - this used to be 'png_do_strip_filler' but it used a + * somewhat weird combination of flags to determine what to do. All the calls + * to png_do_strip_filler are changed in 1.5.2 to call this instead with the + * correct arguments. + * + * The routine isn't general - the channel must be the channel at the start or + * end (not in the middle) of each pixel. + */ +void /* PRIVATE */ +png_do_strip_channel(png_row_infop row_info, png_bytep row, int at_start) +{ + png_bytep sp = row; /* source pointer */ + png_bytep dp = row; /* destination pointer */ + png_bytep ep = row + row_info->rowbytes; /* One beyond end of row */ + + /* At the start sp will point to the first byte to copy and dp to where + * it is copied to. ep always points just beyond the end of the row, so + * the loop simply copies (channels-1) channels until sp reaches ep. + * + * at_start: 0 -- convert AG, XG, ARGB, XRGB, AAGG, XXGG, etc. + * nonzero -- convert GA, GX, RGBA, RGBX, GGAA, RRGGBBXX, etc. + */ + + /* GA, GX, XG cases */ + if (row_info->channels == 2) + { + if (row_info->bit_depth == 8) + { + if (at_start) /* Skip initial filler */ + ++sp; + else /* Skip initial channel and, for sp, the filler */ + sp += 2, ++dp; + + /* For a 1 pixel wide image there is nothing to do */ + while (sp < ep) + *dp++ = *sp, sp += 2; + + row_info->pixel_depth = 8; + } + + else if (row_info->bit_depth == 16) + { + if (at_start) /* Skip initial filler */ + sp += 2; + else /* Skip initial channel and, for sp, the filler */ + sp += 4, dp += 2; + + while (sp < ep) + *dp++ = *sp++, *dp++ = *sp, sp += 3; + + row_info->pixel_depth = 16; + } + + else + return; /* bad bit depth */ + + row_info->channels = 1; + + /* Finally fix the color type if it records an alpha channel */ + if (row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + row_info->color_type = PNG_COLOR_TYPE_GRAY; + } + + /* RGBA, RGBX, XRGB cases */ + else if (row_info->channels == 4) + { + if (row_info->bit_depth == 8) + { + if (at_start) /* Skip initial filler */ + ++sp; + else /* Skip initial channels and, for sp, the filler */ + sp += 4, dp += 3; + + /* Note that the loop adds 3 to dp and 4 to sp each time. */ + while (sp < ep) + *dp++ = *sp++, *dp++ = *sp++, *dp++ = *sp, sp += 2; + + row_info->pixel_depth = 24; + } + + else if (row_info->bit_depth == 16) + { + if (at_start) /* Skip initial filler */ + sp += 2; + else /* Skip initial channels and, for sp, the filler */ + sp += 8, dp += 6; + + while (sp < ep) + { + /* Copy 6 bytes, skip 2 */ + *dp++ = *sp++, *dp++ = *sp++; + *dp++ = *sp++, *dp++ = *sp++; + *dp++ = *sp++, *dp++ = *sp, sp += 3; + } + + row_info->pixel_depth = 48; + } + + else + return; /* bad bit depth */ + + row_info->channels = 3; + + /* Finally fix the color type if it records an alpha channel */ + if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + row_info->color_type = PNG_COLOR_TYPE_RGB; + } + + else + return; /* The filler channel has gone already */ + + /* Fix the rowbytes value. */ + row_info->rowbytes = dp-row; +} +#endif + +#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) +/* Swaps red and blue bytes within a pixel */ +void /* PRIVATE */ +png_do_bgr(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_bgr"); + + if ((row_info->color_type & PNG_COLOR_MASK_COLOR)) + { + png_uint_32 row_width = row_info->width; + if (row_info->bit_depth == 8) + { + if (row_info->color_type == PNG_COLOR_TYPE_RGB) + { + png_bytep rp; + png_uint_32 i; + + for (i = 0, rp = row; i < row_width; i++, rp += 3) + { + png_byte save = *rp; + *rp = *(rp + 2); + *(rp + 2) = save; + } + } + + else if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + { + png_bytep rp; + png_uint_32 i; + + for (i = 0, rp = row; i < row_width; i++, rp += 4) + { + png_byte save = *rp; + *rp = *(rp + 2); + *(rp + 2) = save; + } + } + } + +#ifdef PNG_16BIT_SUPPORTED + else if (row_info->bit_depth == 16) + { + if (row_info->color_type == PNG_COLOR_TYPE_RGB) + { + png_bytep rp; + png_uint_32 i; + + for (i = 0, rp = row; i < row_width; i++, rp += 6) + { + png_byte save = *rp; + *rp = *(rp + 4); + *(rp + 4) = save; + save = *(rp + 1); + *(rp + 1) = *(rp + 5); + *(rp + 5) = save; + } + } + + else if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + { + png_bytep rp; + png_uint_32 i; + + for (i = 0, rp = row; i < row_width; i++, rp += 8) + { + png_byte save = *rp; + *rp = *(rp + 4); + *(rp + 4) = save; + save = *(rp + 1); + *(rp + 1) = *(rp + 5); + *(rp + 5) = save; + } + } + } +#endif + } +} +#endif /* PNG_READ_BGR_SUPPORTED or PNG_WRITE_BGR_SUPPORTED */ + +#if defined(PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED) || \ + defined(PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED) +/* Added at libpng-1.5.10 */ +void /* PRIVATE */ +png_do_check_palette_indexes(png_structrp png_ptr, png_row_infop row_info) +{ + if (png_ptr->num_palette < (1 << row_info->bit_depth) && + png_ptr->num_palette > 0) /* num_palette can be 0 in MNG files */ + { + /* Calculations moved outside switch in an attempt to stop different + * compiler warnings. 'padding' is in *bits* within the last byte, it is + * an 'int' because pixel_depth becomes an 'int' in the expression below, + * and this calculation is used because it avoids warnings that other + * forms produced on either GCC or MSVC. + */ + int padding = (-row_info->pixel_depth * row_info->width) & 7; + png_bytep rp = png_ptr->row_buf + row_info->rowbytes; + + switch (row_info->bit_depth) + { + case 1: + { + /* in this case, all bytes must be 0 so we don't need + * to unpack the pixels except for the rightmost one. + */ + for (; rp > png_ptr->row_buf; rp--) + { + if (*rp >> padding != 0) + png_ptr->num_palette_max = 1; + padding = 0; + } + + break; + } + + case 2: + { + for (; rp > png_ptr->row_buf; rp--) + { + int i = ((*rp >> padding) & 0x03); + + if (i > png_ptr->num_palette_max) + png_ptr->num_palette_max = i; + + i = (((*rp >> padding) >> 2) & 0x03); + + if (i > png_ptr->num_palette_max) + png_ptr->num_palette_max = i; + + i = (((*rp >> padding) >> 4) & 0x03); + + if (i > png_ptr->num_palette_max) + png_ptr->num_palette_max = i; + + i = (((*rp >> padding) >> 6) & 0x03); + + if (i > png_ptr->num_palette_max) + png_ptr->num_palette_max = i; + + padding = 0; + } + + break; + } + + case 4: + { + for (; rp > png_ptr->row_buf; rp--) + { + int i = ((*rp >> padding) & 0x0f); + + if (i > png_ptr->num_palette_max) + png_ptr->num_palette_max = i; + + i = (((*rp >> padding) >> 4) & 0x0f); + + if (i > png_ptr->num_palette_max) + png_ptr->num_palette_max = i; + + padding = 0; + } + + break; + } + + case 8: + { + for (; rp > png_ptr->row_buf; rp--) + { + if (*rp > png_ptr->num_palette_max) + png_ptr->num_palette_max = (int) *rp; + } + + break; + } + + default: + break; + } + } +} +#endif /* PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED */ + +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ + defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED +void PNGAPI +png_set_user_transform_info(png_structrp png_ptr, png_voidp + user_transform_ptr, int user_transform_depth, int user_transform_channels) +{ + png_debug(1, "in png_set_user_transform_info"); + + if (png_ptr == NULL) + return; + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED + if ((png_ptr->mode & PNG_IS_READ_STRUCT) != 0 && + (png_ptr->flags & PNG_FLAG_ROW_INIT) != 0) + { + png_app_error(png_ptr, + "info change after png_start_read_image or png_read_update_info"); + return; + } +#endif + + png_ptr->user_transform_ptr = user_transform_ptr; + png_ptr->user_transform_depth = (png_byte)user_transform_depth; + png_ptr->user_transform_channels = (png_byte)user_transform_channels; +} +#endif + +/* This function returns a pointer to the user_transform_ptr associated with + * the user transform functions. The application should free any memory + * associated with this pointer before png_write_destroy and png_read_destroy + * are called. + */ +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED +png_voidp PNGAPI +png_get_user_transform_ptr(png_const_structrp png_ptr) +{ + if (png_ptr == NULL) + return (NULL); + + return png_ptr->user_transform_ptr; +} +#endif + +#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED +png_uint_32 PNGAPI +png_get_current_row_number(png_const_structrp png_ptr) +{ + /* See the comments in png.h - this is the sub-image row when reading and + * interlaced image. + */ + if (png_ptr != NULL) + return png_ptr->row_number; + + return PNG_UINT_32_MAX; /* help the app not to fail silently */ +} + +png_byte PNGAPI +png_get_current_pass_number(png_const_structrp png_ptr) +{ + if (png_ptr != NULL) + return png_ptr->pass; + return 8; /* invalid */ +} +#endif /* PNG_USER_TRANSFORM_INFO_SUPPORTED */ +#endif /* PNG_READ_USER_TRANSFORM_SUPPORTED || + PNG_WRITE_USER_TRANSFORM_SUPPORTED */ +#endif /* PNG_READ_SUPPORTED || PNG_WRITE_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngusr.dfa b/src/SDL2/external/libpng-1.6.2/pngusr.dfa new file mode 100644 index 000000000..9d39564b5 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngusr.dfa @@ -0,0 +1,14 @@ +# pngusr.dfa +# +# Build time configuration of libpng +# +# Enter build configuration options in this file +# +# Security settings: by default these limits are unset, you can change them +# here by entering the appropriate values as #defines preceded by '@' (to cause, +# them to be passed through to the build of pnglibconf.h), for example: +# +# @# define PNG_USER_WIDTH_MAX 1000000 +# @# define PNG_USER_HEIGHT_MAX 1000000 +# @# define PNG_USER_CHUNK_CACHE_MAX 128 +# @# define PNG_USER_CHUNK_MALLOC_MAX 8000000 diff --git a/src/SDL2/external/libpng-1.6.2/pngwio.c b/src/SDL2/external/libpng-1.6.2/pngwio.c new file mode 100644 index 000000000..e3289dfe4 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngwio.c @@ -0,0 +1,164 @@ + +/* pngwio.c - functions for data output + * + * Last changed in libpng 1.6.0 [February 14, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * This file provides a location for all output. Users who need + * special handling are expected to write functions that have the same + * arguments as these and perform similar functions, but that possibly + * use different output methods. Note that you shouldn't change these + * functions, but rather write replacement functions and then change + * them at run time with png_set_write_fn(...). + */ + +#include "pngpriv.h" + +#ifdef PNG_WRITE_SUPPORTED + +/* Write the data to whatever output you are using. The default routine + * writes to a file pointer. Note that this routine sometimes gets called + * with very small lengths, so you should implement some kind of simple + * buffering if you are using unbuffered writes. This should never be asked + * to write more than 64K on a 16 bit machine. + */ + +void /* PRIVATE */ +png_write_data(png_structrp png_ptr, png_const_bytep data, png_size_t length) +{ + /* NOTE: write_data_fn must not change the buffer! */ + if (png_ptr->write_data_fn != NULL ) + (*(png_ptr->write_data_fn))(png_ptr, png_constcast(png_bytep,data), + length); + + else + png_error(png_ptr, "Call to NULL write function"); +} + +#ifdef PNG_STDIO_SUPPORTED +/* This is the function that does the actual writing of data. If you are + * not writing to a standard C stream, you should create a replacement + * write_data function and use it at run time with png_set_write_fn(), rather + * than changing the library. + */ +void PNGCBAPI +png_default_write_data(png_structp png_ptr, png_bytep data, png_size_t length) +{ + png_size_t check; + + if (png_ptr == NULL) + return; + + check = fwrite(data, 1, length, (png_FILE_p)(png_ptr->io_ptr)); + + if (check != length) + png_error(png_ptr, "Write Error"); +} +#endif + +/* This function is called to output any data pending writing (normally + * to disk). After png_flush is called, there should be no data pending + * writing in any buffers. + */ +#ifdef PNG_WRITE_FLUSH_SUPPORTED +void /* PRIVATE */ +png_flush(png_structrp png_ptr) +{ + if (png_ptr->output_flush_fn != NULL) + (*(png_ptr->output_flush_fn))(png_ptr); +} + +# ifdef PNG_STDIO_SUPPORTED +void PNGCBAPI +png_default_flush(png_structp png_ptr) +{ + png_FILE_p io_ptr; + + if (png_ptr == NULL) + return; + + io_ptr = png_voidcast(png_FILE_p, (png_ptr->io_ptr)); + fflush(io_ptr); +} +# endif +#endif + +/* This function allows the application to supply new output functions for + * libpng if standard C streams aren't being used. + * + * This function takes as its arguments: + * png_ptr - pointer to a png output data structure + * io_ptr - pointer to user supplied structure containing info about + * the output functions. May be NULL. + * write_data_fn - pointer to a new output function that takes as its + * arguments a pointer to a png_struct, a pointer to + * data to be written, and a 32-bit unsigned int that is + * the number of bytes to be written. The new write + * function should call png_error(png_ptr, "Error msg") + * to exit and output any fatal error messages. May be + * NULL, in which case libpng's default function will + * be used. + * flush_data_fn - pointer to a new flush function that takes as its + * arguments a pointer to a png_struct. After a call to + * the flush function, there should be no data in any buffers + * or pending transmission. If the output method doesn't do + * any buffering of output, a function prototype must still be + * supplied although it doesn't have to do anything. If + * PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile + * time, output_flush_fn will be ignored, although it must be + * supplied for compatibility. May be NULL, in which case + * libpng's default function will be used, if + * PNG_WRITE_FLUSH_SUPPORTED is defined. This is not + * a good idea if io_ptr does not point to a standard + * *FILE structure. + */ +void PNGAPI +png_set_write_fn(png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn) +{ + if (png_ptr == NULL) + return; + + png_ptr->io_ptr = io_ptr; + +#ifdef PNG_STDIO_SUPPORTED + if (write_data_fn != NULL) + png_ptr->write_data_fn = write_data_fn; + + else + png_ptr->write_data_fn = png_default_write_data; +#else + png_ptr->write_data_fn = write_data_fn; +#endif + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +# ifdef PNG_STDIO_SUPPORTED + + if (output_flush_fn != NULL) + png_ptr->output_flush_fn = output_flush_fn; + + else + png_ptr->output_flush_fn = png_default_flush; + +# else + png_ptr->output_flush_fn = output_flush_fn; +# endif +#endif /* PNG_WRITE_FLUSH_SUPPORTED */ + + /* It is an error to read while writing a png file */ + if (png_ptr->read_data_fn != NULL) + { + png_ptr->read_data_fn = NULL; + + png_warning(png_ptr, + "Can't set both read_data_fn and write_data_fn in the" + " same structure"); + } +} +#endif /* PNG_WRITE_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngwrite.c b/src/SDL2/external/libpng-1.6.2/pngwrite.c new file mode 100644 index 000000000..33924aac0 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngwrite.c @@ -0,0 +1,2331 @@ + +/* pngwrite.c - general routines to write a PNG file + * + * Last changed in libpng 1.6.2 [April 25, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +#include "pngpriv.h" +#if defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) && defined(PNG_STDIO_SUPPORTED) +# include +#endif + +#ifdef PNG_WRITE_SUPPORTED + +#ifdef PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED +/* Write out all the unknown chunks for the current given location */ +static void +write_unknown_chunks(png_structrp png_ptr, png_const_inforp info_ptr, + unsigned int where) +{ + if (info_ptr->unknown_chunks_num) + { + png_const_unknown_chunkp up; + + png_debug(5, "writing extra chunks"); + + for (up = info_ptr->unknown_chunks; + up < info_ptr->unknown_chunks + info_ptr->unknown_chunks_num; + ++up) + if (up->location & where) + { + /* If per-chunk unknown chunk handling is enabled use it, otherwise + * just write the chunks the application has set. + */ +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED + int keep = png_handle_as_unknown(png_ptr, up->name); + + /* NOTE: this code is radically different from the read side in the + * matter of handling an ancillary unknown chunk. In the read side + * the default behavior is to discard it, in the code below the default + * behavior is to write it. Critical chunks are, however, only + * written if explicitly listed or if the default is set to write all + * unknown chunks. + * + * The default handling is also slightly weird - it is not possible to + * stop the writing of all unsafe-to-copy chunks! + * + * TODO: REVIEW: this would seem to be a bug. + */ + if (keep != PNG_HANDLE_CHUNK_NEVER && + ((up->name[3] & 0x20) /* safe-to-copy overrides everything */ || + keep == PNG_HANDLE_CHUNK_ALWAYS || + (keep == PNG_HANDLE_CHUNK_AS_DEFAULT && + png_ptr->unknown_default == PNG_HANDLE_CHUNK_ALWAYS))) +#endif + { + /* TODO: review, what is wrong with a zero length unknown chunk? */ + if (up->size == 0) + png_warning(png_ptr, "Writing zero-length unknown chunk"); + + png_write_chunk(png_ptr, up->name, up->data, up->size); + } + } + } +} +#endif /* PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED */ + +/* Writes all the PNG information. This is the suggested way to use the + * library. If you have a new chunk to add, make a function to write it, + * and put it in the correct location here. If you want the chunk written + * after the image data, put it in png_write_end(). I strongly encourage + * you to supply a PNG_INFO_ flag, and check info_ptr->valid before writing + * the chunk, as that will keep the code from breaking if you want to just + * write a plain PNG file. If you have long comments, I suggest writing + * them in png_write_end(), and compressing them. + */ +void PNGAPI +png_write_info_before_PLTE(png_structrp png_ptr, png_const_inforp info_ptr) +{ + png_debug(1, "in png_write_info_before_PLTE"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + if (!(png_ptr->mode & PNG_WROTE_INFO_BEFORE_PLTE)) + { + /* Write PNG signature */ + png_write_sig(png_ptr); + +#ifdef PNG_MNG_FEATURES_SUPPORTED + if ((png_ptr->mode&PNG_HAVE_PNG_SIGNATURE) && \ + (png_ptr->mng_features_permitted)) + { + png_warning(png_ptr, "MNG features are not allowed in a PNG datastream"); + png_ptr->mng_features_permitted = 0; + } +#endif + + /* Write IHDR information. */ + png_write_IHDR(png_ptr, info_ptr->width, info_ptr->height, + info_ptr->bit_depth, info_ptr->color_type, info_ptr->compression_type, + info_ptr->filter_type, +#ifdef PNG_WRITE_INTERLACING_SUPPORTED + info_ptr->interlace_type +#else + 0 +#endif + ); + + /* The rest of these check to see if the valid field has the appropriate + * flag set, and if it does, writes the chunk. + * + * 1.6.0: COLORSPACE support controls the writing of these chunks too, and + * the chunks will be written if the WRITE routine is there and information + * is available in the COLORSPACE. (See png_colorspace_sync_info in png.c + * for where the valid flags get set.) + * + * Under certain circumstances the colorspace can be invalidated without + * syncing the info_struct 'valid' flags; this happens if libpng detects and + * error and calls png_error while the color space is being set, yet the + * application continues writing the PNG. So check the 'invalid' flag here + * too. + */ +#ifdef PNG_GAMMA_SUPPORTED +# ifdef PNG_WRITE_gAMA_SUPPORTED + if (!(info_ptr->colorspace.flags & PNG_COLORSPACE_INVALID) && + (info_ptr->colorspace.flags & PNG_COLORSPACE_FROM_gAMA) && + (info_ptr->valid & PNG_INFO_gAMA)) + png_write_gAMA_fixed(png_ptr, info_ptr->colorspace.gamma); +# endif +#endif + +#ifdef PNG_COLORSPACE_SUPPORTED + /* Write only one of sRGB or an ICC profile. If a profile was supplied + * and it matches one of the known sRGB ones issue a warning. + */ +# ifdef PNG_WRITE_iCCP_SUPPORTED + if (!(info_ptr->colorspace.flags & PNG_COLORSPACE_INVALID) && + (info_ptr->valid & PNG_INFO_iCCP)) + { +# ifdef PNG_WRITE_sRGB_SUPPORTED + if (info_ptr->valid & PNG_INFO_sRGB) + png_app_warning(png_ptr, + "profile matches sRGB but writing iCCP instead"); +# endif + + png_write_iCCP(png_ptr, info_ptr->iccp_name, + info_ptr->iccp_profile); + } +# ifdef PNG_WRITE_sRGB_SUPPORTED + else +# endif +# endif + +# ifdef PNG_WRITE_sRGB_SUPPORTED + if (!(info_ptr->colorspace.flags & PNG_COLORSPACE_INVALID) && + (info_ptr->valid & PNG_INFO_sRGB)) + png_write_sRGB(png_ptr, info_ptr->colorspace.rendering_intent); +# endif /* WRITE_sRGB */ +#endif /* COLORSPACE */ + +#ifdef PNG_WRITE_sBIT_SUPPORTED + if (info_ptr->valid & PNG_INFO_sBIT) + png_write_sBIT(png_ptr, &(info_ptr->sig_bit), info_ptr->color_type); +#endif + +#ifdef PNG_COLORSPACE_SUPPORTED +# ifdef PNG_WRITE_cHRM_SUPPORTED + if (!(info_ptr->colorspace.flags & PNG_COLORSPACE_INVALID) && + (info_ptr->colorspace.flags & PNG_COLORSPACE_FROM_cHRM) && + (info_ptr->valid & PNG_INFO_cHRM)) + png_write_cHRM_fixed(png_ptr, &info_ptr->colorspace.end_points_xy); +# endif +#endif + +#ifdef PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED + write_unknown_chunks(png_ptr, info_ptr, PNG_HAVE_IHDR); +#endif + + png_ptr->mode |= PNG_WROTE_INFO_BEFORE_PLTE; + } +} + +void PNGAPI +png_write_info(png_structrp png_ptr, png_const_inforp info_ptr) +{ +#if defined(PNG_WRITE_TEXT_SUPPORTED) || defined(PNG_WRITE_sPLT_SUPPORTED) + int i; +#endif + + png_debug(1, "in png_write_info"); + + if (png_ptr == NULL || info_ptr == NULL) + return; + + png_write_info_before_PLTE(png_ptr, info_ptr); + + if (info_ptr->valid & PNG_INFO_PLTE) + png_write_PLTE(png_ptr, info_ptr->palette, + (png_uint_32)info_ptr->num_palette); + + else if (info_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + png_error(png_ptr, "Valid palette required for paletted images"); + +#ifdef PNG_WRITE_tRNS_SUPPORTED + if (info_ptr->valid & PNG_INFO_tRNS) + { +#ifdef PNG_WRITE_INVERT_ALPHA_SUPPORTED + /* Invert the alpha channel (in tRNS) */ + if ((png_ptr->transformations & PNG_INVERT_ALPHA) && + info_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + { + int j; + for (j = 0; j<(int)info_ptr->num_trans; j++) + info_ptr->trans_alpha[j] = + (png_byte)(255 - info_ptr->trans_alpha[j]); + } +#endif + png_write_tRNS(png_ptr, info_ptr->trans_alpha, &(info_ptr->trans_color), + info_ptr->num_trans, info_ptr->color_type); + } +#endif +#ifdef PNG_WRITE_bKGD_SUPPORTED + if (info_ptr->valid & PNG_INFO_bKGD) + png_write_bKGD(png_ptr, &(info_ptr->background), info_ptr->color_type); +#endif + +#ifdef PNG_WRITE_hIST_SUPPORTED + if (info_ptr->valid & PNG_INFO_hIST) + png_write_hIST(png_ptr, info_ptr->hist, info_ptr->num_palette); +#endif + +#ifdef PNG_WRITE_oFFs_SUPPORTED + if (info_ptr->valid & PNG_INFO_oFFs) + png_write_oFFs(png_ptr, info_ptr->x_offset, info_ptr->y_offset, + info_ptr->offset_unit_type); +#endif + +#ifdef PNG_WRITE_pCAL_SUPPORTED + if (info_ptr->valid & PNG_INFO_pCAL) + png_write_pCAL(png_ptr, info_ptr->pcal_purpose, info_ptr->pcal_X0, + info_ptr->pcal_X1, info_ptr->pcal_type, info_ptr->pcal_nparams, + info_ptr->pcal_units, info_ptr->pcal_params); +#endif + +#ifdef PNG_WRITE_sCAL_SUPPORTED + if (info_ptr->valid & PNG_INFO_sCAL) + png_write_sCAL_s(png_ptr, (int)info_ptr->scal_unit, + info_ptr->scal_s_width, info_ptr->scal_s_height); +#endif /* sCAL */ + +#ifdef PNG_WRITE_pHYs_SUPPORTED + if (info_ptr->valid & PNG_INFO_pHYs) + png_write_pHYs(png_ptr, info_ptr->x_pixels_per_unit, + info_ptr->y_pixels_per_unit, info_ptr->phys_unit_type); +#endif /* pHYs */ + +#ifdef PNG_WRITE_tIME_SUPPORTED + if (info_ptr->valid & PNG_INFO_tIME) + { + png_write_tIME(png_ptr, &(info_ptr->mod_time)); + png_ptr->mode |= PNG_WROTE_tIME; + } +#endif /* tIME */ + +#ifdef PNG_WRITE_sPLT_SUPPORTED + if (info_ptr->valid & PNG_INFO_sPLT) + for (i = 0; i < (int)info_ptr->splt_palettes_num; i++) + png_write_sPLT(png_ptr, info_ptr->splt_palettes + i); +#endif /* sPLT */ + +#ifdef PNG_WRITE_TEXT_SUPPORTED + /* Check to see if we need to write text chunks */ + for (i = 0; i < info_ptr->num_text; i++) + { + png_debug2(2, "Writing header text chunk %d, type %d", i, + info_ptr->text[i].compression); + /* An internationalized chunk? */ + if (info_ptr->text[i].compression > 0) + { +#ifdef PNG_WRITE_iTXt_SUPPORTED + /* Write international chunk */ + png_write_iTXt(png_ptr, + info_ptr->text[i].compression, + info_ptr->text[i].key, + info_ptr->text[i].lang, + info_ptr->text[i].lang_key, + info_ptr->text[i].text); +#else + png_warning(png_ptr, "Unable to write international text"); +#endif + /* Mark this chunk as written */ + info_ptr->text[i].compression = PNG_TEXT_COMPRESSION_NONE_WR; + } + + /* If we want a compressed text chunk */ + else if (info_ptr->text[i].compression == PNG_TEXT_COMPRESSION_zTXt) + { +#ifdef PNG_WRITE_zTXt_SUPPORTED + /* Write compressed chunk */ + png_write_zTXt(png_ptr, info_ptr->text[i].key, + info_ptr->text[i].text, 0, + info_ptr->text[i].compression); +#else + png_warning(png_ptr, "Unable to write compressed text"); +#endif + /* Mark this chunk as written */ + info_ptr->text[i].compression = PNG_TEXT_COMPRESSION_zTXt_WR; + } + + else if (info_ptr->text[i].compression == PNG_TEXT_COMPRESSION_NONE) + { +#ifdef PNG_WRITE_tEXt_SUPPORTED + /* Write uncompressed chunk */ + png_write_tEXt(png_ptr, info_ptr->text[i].key, + info_ptr->text[i].text, + 0); + /* Mark this chunk as written */ + info_ptr->text[i].compression = PNG_TEXT_COMPRESSION_NONE_WR; +#else + /* Can't get here */ + png_warning(png_ptr, "Unable to write uncompressed text"); +#endif + } + } +#endif /* tEXt */ + +#ifdef PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED + write_unknown_chunks(png_ptr, info_ptr, PNG_HAVE_PLTE); +#endif +} + +/* Writes the end of the PNG file. If you don't want to write comments or + * time information, you can pass NULL for info. If you already wrote these + * in png_write_info(), do not write them again here. If you have long + * comments, I suggest writing them here, and compressing them. + */ +void PNGAPI +png_write_end(png_structrp png_ptr, png_inforp info_ptr) +{ + png_debug(1, "in png_write_end"); + + if (png_ptr == NULL) + return; + + if (!(png_ptr->mode & PNG_HAVE_IDAT)) + png_error(png_ptr, "No IDATs written into file"); + +#ifdef PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED + if (png_ptr->num_palette_max > png_ptr->num_palette) + png_benign_error(png_ptr, "Wrote palette index exceeding num_palette"); +#endif + + /* See if user wants us to write information chunks */ + if (info_ptr != NULL) + { +#ifdef PNG_WRITE_TEXT_SUPPORTED + int i; /* local index variable */ +#endif +#ifdef PNG_WRITE_tIME_SUPPORTED + /* Check to see if user has supplied a time chunk */ + if ((info_ptr->valid & PNG_INFO_tIME) && + !(png_ptr->mode & PNG_WROTE_tIME)) + png_write_tIME(png_ptr, &(info_ptr->mod_time)); + +#endif +#ifdef PNG_WRITE_TEXT_SUPPORTED + /* Loop through comment chunks */ + for (i = 0; i < info_ptr->num_text; i++) + { + png_debug2(2, "Writing trailer text chunk %d, type %d", i, + info_ptr->text[i].compression); + /* An internationalized chunk? */ + if (info_ptr->text[i].compression > 0) + { +#ifdef PNG_WRITE_iTXt_SUPPORTED + /* Write international chunk */ + png_write_iTXt(png_ptr, + info_ptr->text[i].compression, + info_ptr->text[i].key, + info_ptr->text[i].lang, + info_ptr->text[i].lang_key, + info_ptr->text[i].text); +#else + png_warning(png_ptr, "Unable to write international text"); +#endif + /* Mark this chunk as written */ + info_ptr->text[i].compression = PNG_TEXT_COMPRESSION_NONE_WR; + } + + else if (info_ptr->text[i].compression >= PNG_TEXT_COMPRESSION_zTXt) + { +#ifdef PNG_WRITE_zTXt_SUPPORTED + /* Write compressed chunk */ + png_write_zTXt(png_ptr, info_ptr->text[i].key, + info_ptr->text[i].text, 0, + info_ptr->text[i].compression); +#else + png_warning(png_ptr, "Unable to write compressed text"); +#endif + /* Mark this chunk as written */ + info_ptr->text[i].compression = PNG_TEXT_COMPRESSION_zTXt_WR; + } + + else if (info_ptr->text[i].compression == PNG_TEXT_COMPRESSION_NONE) + { +#ifdef PNG_WRITE_tEXt_SUPPORTED + /* Write uncompressed chunk */ + png_write_tEXt(png_ptr, info_ptr->text[i].key, + info_ptr->text[i].text, 0); +#else + png_warning(png_ptr, "Unable to write uncompressed text"); +#endif + + /* Mark this chunk as written */ + info_ptr->text[i].compression = PNG_TEXT_COMPRESSION_NONE_WR; + } + } +#endif +#ifdef PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED + write_unknown_chunks(png_ptr, info_ptr, PNG_AFTER_IDAT); +#endif + } + + png_ptr->mode |= PNG_AFTER_IDAT; + + /* Write end of PNG file */ + png_write_IEND(png_ptr); + /* This flush, added in libpng-1.0.8, removed from libpng-1.0.9beta03, + * and restored again in libpng-1.2.30, may cause some applications that + * do not set png_ptr->output_flush_fn to crash. If your application + * experiences a problem, please try building libpng with + * PNG_WRITE_FLUSH_AFTER_IEND_SUPPORTED defined, and report the event to + * png-mng-implement at lists.sf.net . + */ +#ifdef PNG_WRITE_FLUSH_SUPPORTED +# ifdef PNG_WRITE_FLUSH_AFTER_IEND_SUPPORTED + png_flush(png_ptr); +# endif +#endif +} + +#ifdef PNG_CONVERT_tIME_SUPPORTED +void PNGAPI +png_convert_from_struct_tm(png_timep ptime, PNG_CONST struct tm * ttime) +{ + png_debug(1, "in png_convert_from_struct_tm"); + + ptime->year = (png_uint_16)(1900 + ttime->tm_year); + ptime->month = (png_byte)(ttime->tm_mon + 1); + ptime->day = (png_byte)ttime->tm_mday; + ptime->hour = (png_byte)ttime->tm_hour; + ptime->minute = (png_byte)ttime->tm_min; + ptime->second = (png_byte)ttime->tm_sec; +} + +void PNGAPI +png_convert_from_time_t(png_timep ptime, time_t ttime) +{ + struct tm *tbuf; + + png_debug(1, "in png_convert_from_time_t"); + + tbuf = gmtime(&ttime); + png_convert_from_struct_tm(ptime, tbuf); +} +#endif + +/* Initialize png_ptr structure, and allocate any memory needed */ +PNG_FUNCTION(png_structp,PNGAPI +png_create_write_struct,(png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn),PNG_ALLOCATED) +{ +#ifndef PNG_USER_MEM_SUPPORTED + png_structrp png_ptr = png_create_png_struct(user_png_ver, error_ptr, + error_fn, warn_fn, NULL, NULL, NULL); +#else + return png_create_write_struct_2(user_png_ver, error_ptr, error_fn, + warn_fn, NULL, NULL, NULL); +} + +/* Alternate initialize png_ptr structure, and allocate any memory needed */ +PNG_FUNCTION(png_structp,PNGAPI +png_create_write_struct_2,(png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn, png_voidp mem_ptr, + png_malloc_ptr malloc_fn, png_free_ptr free_fn),PNG_ALLOCATED) +{ + png_structrp png_ptr = png_create_png_struct(user_png_ver, error_ptr, + error_fn, warn_fn, mem_ptr, malloc_fn, free_fn); +#endif /* PNG_USER_MEM_SUPPORTED */ + + /* Set the zlib control values to defaults; they can be overridden by the + * application after the struct has been created. + */ + png_ptr->zbuffer_size = PNG_ZBUF_SIZE; + + /* The 'zlib_strategy' setting is irrelevant because png_default_claim in + * pngwutil.c defaults it according to whether or not filters will be used, + * and ignores this setting. + */ + png_ptr->zlib_strategy = PNG_Z_DEFAULT_STRATEGY; + png_ptr->zlib_level = PNG_Z_DEFAULT_COMPRESSION; + png_ptr->zlib_mem_level = 8; + png_ptr->zlib_window_bits = 15; + png_ptr->zlib_method = 8; + +#ifdef PNG_WRITE_COMPRESSED_TEXT_SUPPORTED + png_ptr->zlib_text_strategy = PNG_TEXT_Z_DEFAULT_STRATEGY; + png_ptr->zlib_text_level = PNG_TEXT_Z_DEFAULT_COMPRESSION; + png_ptr->zlib_text_mem_level = 8; + png_ptr->zlib_text_window_bits = 15; + png_ptr->zlib_text_method = 8; +#endif /* PNG_WRITE_COMPRESSED_TEXT_SUPPORTED */ + + /* This is a highly dubious configuration option; by default it is off, but + * it may be appropriate for private builds that are testing extensions not + * conformant to the current specification, or of applications that must not + * fail to write at all costs! + */ +# ifdef PNG_BENIGN_WRITE_ERRORS_SUPPORTED + png_ptr->flags |= PNG_FLAG_BENIGN_ERRORS_WARN; + /* In stable builds only warn if an application error can be completely + * handled. + */ +# endif + + /* App warnings are warnings in release (or release candidate) builds but + * are errors during development. + */ +# if PNG_LIBPNG_BUILD_BASE_TYPE >= PNG_LIBPNG_BUILD_RC + png_ptr->flags |= PNG_FLAG_APP_WARNINGS_WARN; +# endif + + if (png_ptr != NULL) + { + /* TODO: delay this, it can be done in png_init_io() (if the app doesn't + * do it itself) avoiding setting the default function if it is not + * required. + */ + png_set_write_fn(png_ptr, NULL, NULL, NULL); + } + + return png_ptr; +} + + +/* Write a few rows of image data. If the image is interlaced, + * either you will have to write the 7 sub images, or, if you + * have called png_set_interlace_handling(), you will have to + * "write" the image seven times. + */ +void PNGAPI +png_write_rows(png_structrp png_ptr, png_bytepp row, + png_uint_32 num_rows) +{ + png_uint_32 i; /* row counter */ + png_bytepp rp; /* row pointer */ + + png_debug(1, "in png_write_rows"); + + if (png_ptr == NULL) + return; + + /* Loop through the rows */ + for (i = 0, rp = row; i < num_rows; i++, rp++) + { + png_write_row(png_ptr, *rp); + } +} + +/* Write the image. You only need to call this function once, even + * if you are writing an interlaced image. + */ +void PNGAPI +png_write_image(png_structrp png_ptr, png_bytepp image) +{ + png_uint_32 i; /* row index */ + int pass, num_pass; /* pass variables */ + png_bytepp rp; /* points to current row */ + + if (png_ptr == NULL) + return; + + png_debug(1, "in png_write_image"); + +#ifdef PNG_WRITE_INTERLACING_SUPPORTED + /* Initialize interlace handling. If image is not interlaced, + * this will set pass to 1 + */ + num_pass = png_set_interlace_handling(png_ptr); +#else + num_pass = 1; +#endif + /* Loop through passes */ + for (pass = 0; pass < num_pass; pass++) + { + /* Loop through image */ + for (i = 0, rp = image; i < png_ptr->height; i++, rp++) + { + png_write_row(png_ptr, *rp); + } + } +} + +/* Called by user to write a row of image data */ +void PNGAPI +png_write_row(png_structrp png_ptr, png_const_bytep row) +{ + /* 1.5.6: moved from png_struct to be a local structure: */ + png_row_info row_info; + + if (png_ptr == NULL) + return; + + png_debug2(1, "in png_write_row (row %u, pass %d)", + png_ptr->row_number, png_ptr->pass); + + /* Initialize transformations and other stuff if first time */ + if (png_ptr->row_number == 0 && png_ptr->pass == 0) + { + /* Make sure we wrote the header info */ + if (!(png_ptr->mode & PNG_WROTE_INFO_BEFORE_PLTE)) + png_error(png_ptr, + "png_write_info was never called before png_write_row"); + + /* Check for transforms that have been set but were defined out */ +#if !defined(PNG_WRITE_INVERT_SUPPORTED) && defined(PNG_READ_INVERT_SUPPORTED) + if (png_ptr->transformations & PNG_INVERT_MONO) + png_warning(png_ptr, "PNG_WRITE_INVERT_SUPPORTED is not defined"); +#endif + +#if !defined(PNG_WRITE_FILLER_SUPPORTED) && defined(PNG_READ_FILLER_SUPPORTED) + if (png_ptr->transformations & PNG_FILLER) + png_warning(png_ptr, "PNG_WRITE_FILLER_SUPPORTED is not defined"); +#endif +#if !defined(PNG_WRITE_PACKSWAP_SUPPORTED) && \ + defined(PNG_READ_PACKSWAP_SUPPORTED) + if (png_ptr->transformations & PNG_PACKSWAP) + png_warning(png_ptr, + "PNG_WRITE_PACKSWAP_SUPPORTED is not defined"); +#endif + +#if !defined(PNG_WRITE_PACK_SUPPORTED) && defined(PNG_READ_PACK_SUPPORTED) + if (png_ptr->transformations & PNG_PACK) + png_warning(png_ptr, "PNG_WRITE_PACK_SUPPORTED is not defined"); +#endif + +#if !defined(PNG_WRITE_SHIFT_SUPPORTED) && defined(PNG_READ_SHIFT_SUPPORTED) + if (png_ptr->transformations & PNG_SHIFT) + png_warning(png_ptr, "PNG_WRITE_SHIFT_SUPPORTED is not defined"); +#endif + +#if !defined(PNG_WRITE_BGR_SUPPORTED) && defined(PNG_READ_BGR_SUPPORTED) + if (png_ptr->transformations & PNG_BGR) + png_warning(png_ptr, "PNG_WRITE_BGR_SUPPORTED is not defined"); +#endif + +#if !defined(PNG_WRITE_SWAP_SUPPORTED) && defined(PNG_READ_SWAP_SUPPORTED) + if (png_ptr->transformations & PNG_SWAP_BYTES) + png_warning(png_ptr, "PNG_WRITE_SWAP_SUPPORTED is not defined"); +#endif + + png_write_start_row(png_ptr); + } + +#ifdef PNG_WRITE_INTERLACING_SUPPORTED + /* If interlaced and not interested in row, return */ + if (png_ptr->interlaced && (png_ptr->transformations & PNG_INTERLACE)) + { + switch (png_ptr->pass) + { + case 0: + if (png_ptr->row_number & 0x07) + { + png_write_finish_row(png_ptr); + return; + } + break; + + case 1: + if ((png_ptr->row_number & 0x07) || png_ptr->width < 5) + { + png_write_finish_row(png_ptr); + return; + } + break; + + case 2: + if ((png_ptr->row_number & 0x07) != 4) + { + png_write_finish_row(png_ptr); + return; + } + break; + + case 3: + if ((png_ptr->row_number & 0x03) || png_ptr->width < 3) + { + png_write_finish_row(png_ptr); + return; + } + break; + + case 4: + if ((png_ptr->row_number & 0x03) != 2) + { + png_write_finish_row(png_ptr); + return; + } + break; + + case 5: + if ((png_ptr->row_number & 0x01) || png_ptr->width < 2) + { + png_write_finish_row(png_ptr); + return; + } + break; + + case 6: + if (!(png_ptr->row_number & 0x01)) + { + png_write_finish_row(png_ptr); + return; + } + break; + + default: /* error: ignore it */ + break; + } + } +#endif + + /* Set up row info for transformations */ + row_info.color_type = png_ptr->color_type; + row_info.width = png_ptr->usr_width; + row_info.channels = png_ptr->usr_channels; + row_info.bit_depth = png_ptr->usr_bit_depth; + row_info.pixel_depth = (png_byte)(row_info.bit_depth * row_info.channels); + row_info.rowbytes = PNG_ROWBYTES(row_info.pixel_depth, row_info.width); + + png_debug1(3, "row_info->color_type = %d", row_info.color_type); + png_debug1(3, "row_info->width = %u", row_info.width); + png_debug1(3, "row_info->channels = %d", row_info.channels); + png_debug1(3, "row_info->bit_depth = %d", row_info.bit_depth); + png_debug1(3, "row_info->pixel_depth = %d", row_info.pixel_depth); + png_debug1(3, "row_info->rowbytes = %lu", (unsigned long)row_info.rowbytes); + + /* Copy user's row into buffer, leaving room for filter byte. */ + memcpy(png_ptr->row_buf + 1, row, row_info.rowbytes); + +#ifdef PNG_WRITE_INTERLACING_SUPPORTED + /* Handle interlacing */ + if (png_ptr->interlaced && png_ptr->pass < 6 && + (png_ptr->transformations & PNG_INTERLACE)) + { + png_do_write_interlace(&row_info, png_ptr->row_buf + 1, png_ptr->pass); + /* This should always get caught above, but still ... */ + if (!(row_info.width)) + { + png_write_finish_row(png_ptr); + return; + } + } +#endif + +#ifdef PNG_WRITE_TRANSFORMS_SUPPORTED + /* Handle other transformations */ + if (png_ptr->transformations) + png_do_write_transformations(png_ptr, &row_info); +#endif + + /* At this point the row_info pixel depth must match the 'transformed' depth, + * which is also the output depth. + */ + if (row_info.pixel_depth != png_ptr->pixel_depth || + row_info.pixel_depth != png_ptr->transformed_pixel_depth) + png_error(png_ptr, "internal write transform logic error"); + +#ifdef PNG_MNG_FEATURES_SUPPORTED + /* Write filter_method 64 (intrapixel differencing) only if + * 1. Libpng was compiled with PNG_MNG_FEATURES_SUPPORTED and + * 2. Libpng did not write a PNG signature (this filter_method is only + * used in PNG datastreams that are embedded in MNG datastreams) and + * 3. The application called png_permit_mng_features with a mask that + * included PNG_FLAG_MNG_FILTER_64 and + * 4. The filter_method is 64 and + * 5. The color_type is RGB or RGBA + */ + if ((png_ptr->mng_features_permitted & PNG_FLAG_MNG_FILTER_64) && + (png_ptr->filter_type == PNG_INTRAPIXEL_DIFFERENCING)) + { + /* Intrapixel differencing */ + png_do_write_intrapixel(&row_info, png_ptr->row_buf + 1); + } +#endif + +/* Added at libpng-1.5.10 */ +#ifdef PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED + /* Check for out-of-range palette index */ + if (row_info.color_type == PNG_COLOR_TYPE_PALETTE && + png_ptr->num_palette_max >= 0) + png_do_check_palette_indexes(png_ptr, &row_info); +#endif + + /* Find a filter if necessary, filter the row and write it out. */ + png_write_find_filter(png_ptr, &row_info); + + if (png_ptr->write_row_fn != NULL) + (*(png_ptr->write_row_fn))(png_ptr, png_ptr->row_number, png_ptr->pass); +} + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +/* Set the automatic flush interval or 0 to turn flushing off */ +void PNGAPI +png_set_flush(png_structrp png_ptr, int nrows) +{ + png_debug(1, "in png_set_flush"); + + if (png_ptr == NULL) + return; + + png_ptr->flush_dist = (nrows < 0 ? 0 : nrows); +} + +/* Flush the current output buffers now */ +void PNGAPI +png_write_flush(png_structrp png_ptr) +{ + png_debug(1, "in png_write_flush"); + + if (png_ptr == NULL) + return; + + /* We have already written out all of the data */ + if (png_ptr->row_number >= png_ptr->num_rows) + return; + + png_compress_IDAT(png_ptr, NULL, 0, Z_SYNC_FLUSH); + png_ptr->flush_rows = 0; + png_flush(png_ptr); +} +#endif /* PNG_WRITE_FLUSH_SUPPORTED */ + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED +static void png_reset_filter_heuristics(png_structrp png_ptr);/* forward decl */ +#endif + +/* Free any memory used in png_ptr struct without freeing the struct itself. */ +static void +png_write_destroy(png_structrp png_ptr) +{ + png_debug(1, "in png_write_destroy"); + + /* Free any memory zlib uses */ + if (png_ptr->flags & PNG_FLAG_ZSTREAM_INITIALIZED) + deflateEnd(&png_ptr->zstream); + + /* Free our memory. png_free checks NULL for us. */ + png_free_buffer_list(png_ptr, &png_ptr->zbuffer_list); + png_free(png_ptr, png_ptr->row_buf); +#ifdef PNG_WRITE_FILTER_SUPPORTED + png_free(png_ptr, png_ptr->prev_row); + png_free(png_ptr, png_ptr->sub_row); + png_free(png_ptr, png_ptr->up_row); + png_free(png_ptr, png_ptr->avg_row); + png_free(png_ptr, png_ptr->paeth_row); +#endif + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + /* Use this to save a little code space, it doesn't free the filter_costs */ + png_reset_filter_heuristics(png_ptr); + png_free(png_ptr, png_ptr->filter_costs); + png_free(png_ptr, png_ptr->inv_filter_costs); +#endif + +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED + png_free(png_ptr, png_ptr->chunk_list); +#endif + + /* The error handling and memory handling information is left intact at this + * point: the jmp_buf may still have to be freed. See png_destroy_png_struct + * for how this happens. + */ +} + +/* Free all memory used by the write. + * In libpng 1.6.0 this API changed quietly to no longer accept a NULL value for + * *png_ptr_ptr. Prior to 1.6.0 it would accept such a value and it would free + * the passed in info_structs but it would quietly fail to free any of the data + * inside them. In 1.6.0 it quietly does nothing (it has to be quiet because it + * has no png_ptr.) + */ +void PNGAPI +png_destroy_write_struct(png_structpp png_ptr_ptr, png_infopp info_ptr_ptr) +{ + png_debug(1, "in png_destroy_write_struct"); + + if (png_ptr_ptr != NULL) + { + png_structrp png_ptr = *png_ptr_ptr; + + if (png_ptr != NULL) /* added in libpng 1.6.0 */ + { + png_destroy_info_struct(png_ptr, info_ptr_ptr); + + *png_ptr_ptr = NULL; + png_write_destroy(png_ptr); + png_destroy_png_struct(png_ptr); + } + } +} + +/* Allow the application to select one or more row filters to use. */ +void PNGAPI +png_set_filter(png_structrp png_ptr, int method, int filters) +{ + png_debug(1, "in png_set_filter"); + + if (png_ptr == NULL) + return; + +#ifdef PNG_MNG_FEATURES_SUPPORTED + if ((png_ptr->mng_features_permitted & PNG_FLAG_MNG_FILTER_64) && + (method == PNG_INTRAPIXEL_DIFFERENCING)) + method = PNG_FILTER_TYPE_BASE; + +#endif + if (method == PNG_FILTER_TYPE_BASE) + { + switch (filters & (PNG_ALL_FILTERS | 0x07)) + { +#ifdef PNG_WRITE_FILTER_SUPPORTED + case 5: + case 6: + case 7: png_app_error(png_ptr, "Unknown row filter for method 0"); + /* FALL THROUGH */ +#endif /* PNG_WRITE_FILTER_SUPPORTED */ + case PNG_FILTER_VALUE_NONE: + png_ptr->do_filter = PNG_FILTER_NONE; break; + +#ifdef PNG_WRITE_FILTER_SUPPORTED + case PNG_FILTER_VALUE_SUB: + png_ptr->do_filter = PNG_FILTER_SUB; break; + + case PNG_FILTER_VALUE_UP: + png_ptr->do_filter = PNG_FILTER_UP; break; + + case PNG_FILTER_VALUE_AVG: + png_ptr->do_filter = PNG_FILTER_AVG; break; + + case PNG_FILTER_VALUE_PAETH: + png_ptr->do_filter = PNG_FILTER_PAETH; break; + + default: + png_ptr->do_filter = (png_byte)filters; break; +#else + default: + png_app_error(png_ptr, "Unknown row filter for method 0"); +#endif /* PNG_WRITE_FILTER_SUPPORTED */ + } + + /* If we have allocated the row_buf, this means we have already started + * with the image and we should have allocated all of the filter buffers + * that have been selected. If prev_row isn't already allocated, then + * it is too late to start using the filters that need it, since we + * will be missing the data in the previous row. If an application + * wants to start and stop using particular filters during compression, + * it should start out with all of the filters, and then add and + * remove them after the start of compression. + */ + if (png_ptr->row_buf != NULL) + { +#ifdef PNG_WRITE_FILTER_SUPPORTED + if ((png_ptr->do_filter & PNG_FILTER_SUB) && png_ptr->sub_row == NULL) + { + png_ptr->sub_row = (png_bytep)png_malloc(png_ptr, + (png_ptr->rowbytes + 1)); + png_ptr->sub_row[0] = PNG_FILTER_VALUE_SUB; + } + + if ((png_ptr->do_filter & PNG_FILTER_UP) && png_ptr->up_row == NULL) + { + if (png_ptr->prev_row == NULL) + { + png_warning(png_ptr, "Can't add Up filter after starting"); + png_ptr->do_filter = (png_byte)(png_ptr->do_filter & + ~PNG_FILTER_UP); + } + + else + { + png_ptr->up_row = (png_bytep)png_malloc(png_ptr, + (png_ptr->rowbytes + 1)); + png_ptr->up_row[0] = PNG_FILTER_VALUE_UP; + } + } + + if ((png_ptr->do_filter & PNG_FILTER_AVG) && png_ptr->avg_row == NULL) + { + if (png_ptr->prev_row == NULL) + { + png_warning(png_ptr, "Can't add Average filter after starting"); + png_ptr->do_filter = (png_byte)(png_ptr->do_filter & + ~PNG_FILTER_AVG); + } + + else + { + png_ptr->avg_row = (png_bytep)png_malloc(png_ptr, + (png_ptr->rowbytes + 1)); + png_ptr->avg_row[0] = PNG_FILTER_VALUE_AVG; + } + } + + if ((png_ptr->do_filter & PNG_FILTER_PAETH) && + png_ptr->paeth_row == NULL) + { + if (png_ptr->prev_row == NULL) + { + png_warning(png_ptr, "Can't add Paeth filter after starting"); + png_ptr->do_filter &= (png_byte)(~PNG_FILTER_PAETH); + } + + else + { + png_ptr->paeth_row = (png_bytep)png_malloc(png_ptr, + (png_ptr->rowbytes + 1)); + png_ptr->paeth_row[0] = PNG_FILTER_VALUE_PAETH; + } + } + + if (png_ptr->do_filter == PNG_NO_FILTERS) +#endif /* PNG_WRITE_FILTER_SUPPORTED */ + png_ptr->do_filter = PNG_FILTER_NONE; + } + } + else + png_error(png_ptr, "Unknown custom filter method"); +} + +/* This allows us to influence the way in which libpng chooses the "best" + * filter for the current scanline. While the "minimum-sum-of-absolute- + * differences metric is relatively fast and effective, there is some + * question as to whether it can be improved upon by trying to keep the + * filtered data going to zlib more consistent, hopefully resulting in + * better compression. + */ +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* GRR 970116 */ +/* Convenience reset API. */ +static void +png_reset_filter_heuristics(png_structrp png_ptr) +{ + /* Clear out any old values in the 'weights' - this must be done because if + * the app calls set_filter_heuristics multiple times with different + * 'num_weights' values we would otherwise potentially have wrong sized + * arrays. + */ + png_ptr->num_prev_filters = 0; + png_ptr->heuristic_method = PNG_FILTER_HEURISTIC_UNWEIGHTED; + if (png_ptr->prev_filters != NULL) + { + png_bytep old = png_ptr->prev_filters; + png_ptr->prev_filters = NULL; + png_free(png_ptr, old); + } + if (png_ptr->filter_weights != NULL) + { + png_uint_16p old = png_ptr->filter_weights; + png_ptr->filter_weights = NULL; + png_free(png_ptr, old); + } + + if (png_ptr->inv_filter_weights != NULL) + { + png_uint_16p old = png_ptr->inv_filter_weights; + png_ptr->inv_filter_weights = NULL; + png_free(png_ptr, old); + } + + /* Leave the filter_costs - this array is fixed size. */ +} + +static int +png_init_filter_heuristics(png_structrp png_ptr, int heuristic_method, + int num_weights) +{ + if (png_ptr == NULL) + return 0; + + /* Clear out the arrays */ + png_reset_filter_heuristics(png_ptr); + + /* Check arguments; the 'reset' function makes the correct settings for the + * unweighted case, but we must handle the weight case by initializing the + * arrays for the caller. + */ + if (heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + int i; + + if (num_weights > 0) + { + png_ptr->prev_filters = (png_bytep)png_malloc(png_ptr, + (png_uint_32)((sizeof (png_byte)) * num_weights)); + + /* To make sure that the weighting starts out fairly */ + for (i = 0; i < num_weights; i++) + { + png_ptr->prev_filters[i] = 255; + } + + png_ptr->filter_weights = (png_uint_16p)png_malloc(png_ptr, + (png_uint_32)((sizeof (png_uint_16)) * num_weights)); + + png_ptr->inv_filter_weights = (png_uint_16p)png_malloc(png_ptr, + (png_uint_32)((sizeof (png_uint_16)) * num_weights)); + + for (i = 0; i < num_weights; i++) + { + png_ptr->inv_filter_weights[i] = + png_ptr->filter_weights[i] = PNG_WEIGHT_FACTOR; + } + + /* Safe to set this now */ + png_ptr->num_prev_filters = (png_byte)num_weights; + } + + /* If, in the future, there are other filter methods, this would + * need to be based on png_ptr->filter. + */ + if (png_ptr->filter_costs == NULL) + { + png_ptr->filter_costs = (png_uint_16p)png_malloc(png_ptr, + (png_uint_32)((sizeof (png_uint_16)) * PNG_FILTER_VALUE_LAST)); + + png_ptr->inv_filter_costs = (png_uint_16p)png_malloc(png_ptr, + (png_uint_32)((sizeof (png_uint_16)) * PNG_FILTER_VALUE_LAST)); + } + + for (i = 0; i < PNG_FILTER_VALUE_LAST; i++) + { + png_ptr->inv_filter_costs[i] = + png_ptr->filter_costs[i] = PNG_COST_FACTOR; + } + + /* All the arrays are inited, safe to set this: */ + png_ptr->heuristic_method = PNG_FILTER_HEURISTIC_WEIGHTED; + + /* Return the 'ok' code. */ + return 1; + } + else if (heuristic_method == PNG_FILTER_HEURISTIC_DEFAULT || + heuristic_method == PNG_FILTER_HEURISTIC_UNWEIGHTED) + { + return 1; + } + else + { + png_warning(png_ptr, "Unknown filter heuristic method"); + return 0; + } +} + +/* Provide floating and fixed point APIs */ +#ifdef PNG_FLOATING_POINT_SUPPORTED +void PNGAPI +png_set_filter_heuristics(png_structrp png_ptr, int heuristic_method, + int num_weights, png_const_doublep filter_weights, + png_const_doublep filter_costs) +{ + png_debug(1, "in png_set_filter_heuristics"); + + /* The internal API allocates all the arrays and ensures that the elements of + * those arrays are set to the default value. + */ + if (!png_init_filter_heuristics(png_ptr, heuristic_method, num_weights)) + return; + + /* If using the weighted method copy in the weights. */ + if (heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + int i; + for (i = 0; i < num_weights; i++) + { + if (filter_weights[i] <= 0.0) + { + png_ptr->inv_filter_weights[i] = + png_ptr->filter_weights[i] = PNG_WEIGHT_FACTOR; + } + + else + { + png_ptr->inv_filter_weights[i] = + (png_uint_16)(PNG_WEIGHT_FACTOR*filter_weights[i]+.5); + + png_ptr->filter_weights[i] = + (png_uint_16)(PNG_WEIGHT_FACTOR/filter_weights[i]+.5); + } + } + + /* Here is where we set the relative costs of the different filters. We + * should take the desired compression level into account when setting + * the costs, so that Paeth, for instance, has a high relative cost at low + * compression levels, while it has a lower relative cost at higher + * compression settings. The filter types are in order of increasing + * relative cost, so it would be possible to do this with an algorithm. + */ + for (i = 0; i < PNG_FILTER_VALUE_LAST; i++) if (filter_costs[i] >= 1.0) + { + png_ptr->inv_filter_costs[i] = + (png_uint_16)(PNG_COST_FACTOR / filter_costs[i] + .5); + + png_ptr->filter_costs[i] = + (png_uint_16)(PNG_COST_FACTOR * filter_costs[i] + .5); + } + } +} +#endif /* FLOATING_POINT */ + +#ifdef PNG_FIXED_POINT_SUPPORTED +void PNGAPI +png_set_filter_heuristics_fixed(png_structrp png_ptr, int heuristic_method, + int num_weights, png_const_fixed_point_p filter_weights, + png_const_fixed_point_p filter_costs) +{ + png_debug(1, "in png_set_filter_heuristics_fixed"); + + /* The internal API allocates all the arrays and ensures that the elements of + * those arrays are set to the default value. + */ + if (!png_init_filter_heuristics(png_ptr, heuristic_method, num_weights)) + return; + + /* If using the weighted method copy in the weights. */ + if (heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + int i; + for (i = 0; i < num_weights; i++) + { + if (filter_weights[i] <= 0) + { + png_ptr->inv_filter_weights[i] = + png_ptr->filter_weights[i] = PNG_WEIGHT_FACTOR; + } + + else + { + png_ptr->inv_filter_weights[i] = (png_uint_16) + ((PNG_WEIGHT_FACTOR*filter_weights[i]+PNG_FP_HALF)/PNG_FP_1); + + png_ptr->filter_weights[i] = (png_uint_16)((PNG_WEIGHT_FACTOR* + PNG_FP_1+(filter_weights[i]/2))/filter_weights[i]); + } + } + + /* Here is where we set the relative costs of the different filters. We + * should take the desired compression level into account when setting + * the costs, so that Paeth, for instance, has a high relative cost at low + * compression levels, while it has a lower relative cost at higher + * compression settings. The filter types are in order of increasing + * relative cost, so it would be possible to do this with an algorithm. + */ + for (i = 0; i < PNG_FILTER_VALUE_LAST; i++) + if (filter_costs[i] >= PNG_FP_1) + { + png_uint_32 tmp; + + /* Use a 32 bit unsigned temporary here because otherwise the + * intermediate value will be a 32 bit *signed* integer (ANSI rules) + * and this will get the wrong answer on division. + */ + tmp = PNG_COST_FACTOR*PNG_FP_1 + (filter_costs[i]/2); + tmp /= filter_costs[i]; + + png_ptr->inv_filter_costs[i] = (png_uint_16)tmp; + + tmp = PNG_COST_FACTOR * filter_costs[i] + PNG_FP_HALF; + tmp /= PNG_FP_1; + + png_ptr->filter_costs[i] = (png_uint_16)tmp; + } + } +} +#endif /* FIXED_POINT */ +#endif /* PNG_WRITE_WEIGHTED_FILTER_SUPPORTED */ + +void PNGAPI +png_set_compression_level(png_structrp png_ptr, int level) +{ + png_debug(1, "in png_set_compression_level"); + + if (png_ptr == NULL) + return; + + png_ptr->zlib_level = level; +} + +void PNGAPI +png_set_compression_mem_level(png_structrp png_ptr, int mem_level) +{ + png_debug(1, "in png_set_compression_mem_level"); + + if (png_ptr == NULL) + return; + + png_ptr->zlib_mem_level = mem_level; +} + +void PNGAPI +png_set_compression_strategy(png_structrp png_ptr, int strategy) +{ + png_debug(1, "in png_set_compression_strategy"); + + if (png_ptr == NULL) + return; + + /* The flag setting here prevents the libpng dynamic selection of strategy. + */ + png_ptr->flags |= PNG_FLAG_ZLIB_CUSTOM_STRATEGY; + png_ptr->zlib_strategy = strategy; +} + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +void PNGAPI +png_set_compression_window_bits(png_structrp png_ptr, int window_bits) +{ + if (png_ptr == NULL) + return; + + /* Prior to 1.6.0 this would warn but then set the window_bits value, this + * meant that negative window bits values could be selected which would cause + * libpng to write a non-standard PNG file with raw deflate or gzip + * compressed IDAT or ancillary chunks. Such files can be read and there is + * no warning on read, so this seems like a very bad idea. + */ + if (window_bits > 15) + { + png_warning(png_ptr, "Only compression windows <= 32k supported by PNG"); + window_bits = 15; + } + + else if (window_bits < 8) + { + png_warning(png_ptr, "Only compression windows >= 256 supported by PNG"); + window_bits = 8; + } + + png_ptr->zlib_window_bits = window_bits; +} + +void PNGAPI +png_set_compression_method(png_structrp png_ptr, int method) +{ + png_debug(1, "in png_set_compression_method"); + + if (png_ptr == NULL) + return; + + /* This would produce an invalid PNG file if it worked, but it doesn't and + * deflate will fault it, so it is harmless to just warn here. + */ + if (method != 8) + png_warning(png_ptr, "Only compression method 8 is supported by PNG"); + + png_ptr->zlib_method = method; +} + +/* The following were added to libpng-1.5.4 */ +#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +void PNGAPI +png_set_text_compression_level(png_structrp png_ptr, int level) +{ + png_debug(1, "in png_set_text_compression_level"); + + if (png_ptr == NULL) + return; + + png_ptr->zlib_text_level = level; +} + +void PNGAPI +png_set_text_compression_mem_level(png_structrp png_ptr, int mem_level) +{ + png_debug(1, "in png_set_text_compression_mem_level"); + + if (png_ptr == NULL) + return; + + png_ptr->zlib_text_mem_level = mem_level; +} + +void PNGAPI +png_set_text_compression_strategy(png_structrp png_ptr, int strategy) +{ + png_debug(1, "in png_set_text_compression_strategy"); + + if (png_ptr == NULL) + return; + + png_ptr->zlib_text_strategy = strategy; +} + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +void PNGAPI +png_set_text_compression_window_bits(png_structrp png_ptr, int window_bits) +{ + if (png_ptr == NULL) + return; + + if (window_bits > 15) + { + png_warning(png_ptr, "Only compression windows <= 32k supported by PNG"); + window_bits = 15; + } + + else if (window_bits < 8) + { + png_warning(png_ptr, "Only compression windows >= 256 supported by PNG"); + window_bits = 8; + } + + png_ptr->zlib_text_window_bits = window_bits; +} + +void PNGAPI +png_set_text_compression_method(png_structrp png_ptr, int method) +{ + png_debug(1, "in png_set_text_compression_method"); + + if (png_ptr == NULL) + return; + + if (method != 8) + png_warning(png_ptr, "Only compression method 8 is supported by PNG"); + + png_ptr->zlib_text_method = method; +} +#endif /* PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED */ +/* end of API added to libpng-1.5.4 */ + +void PNGAPI +png_set_write_status_fn(png_structrp png_ptr, png_write_status_ptr write_row_fn) +{ + if (png_ptr == NULL) + return; + + png_ptr->write_row_fn = write_row_fn; +} + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED +void PNGAPI +png_set_write_user_transform_fn(png_structrp png_ptr, png_user_transform_ptr + write_user_transform_fn) +{ + png_debug(1, "in png_set_write_user_transform_fn"); + + if (png_ptr == NULL) + return; + + png_ptr->transformations |= PNG_USER_TRANSFORM; + png_ptr->write_user_transform_fn = write_user_transform_fn; +} +#endif + + +#ifdef PNG_INFO_IMAGE_SUPPORTED +void PNGAPI +png_write_png(png_structrp png_ptr, png_inforp info_ptr, + int transforms, voidp params) +{ + if (png_ptr == NULL || info_ptr == NULL) + return; + + /* Write the file header information. */ + png_write_info(png_ptr, info_ptr); + + /* ------ these transformations don't touch the info structure ------- */ + +#ifdef PNG_WRITE_INVERT_SUPPORTED + /* Invert monochrome pixels */ + if (transforms & PNG_TRANSFORM_INVERT_MONO) + png_set_invert_mono(png_ptr); +#endif + +#ifdef PNG_WRITE_SHIFT_SUPPORTED + /* Shift the pixels up to a legal bit depth and fill in + * as appropriate to correctly scale the image. + */ + if ((transforms & PNG_TRANSFORM_SHIFT) + && (info_ptr->valid & PNG_INFO_sBIT)) + png_set_shift(png_ptr, &info_ptr->sig_bit); +#endif + +#ifdef PNG_WRITE_PACK_SUPPORTED + /* Pack pixels into bytes */ + if (transforms & PNG_TRANSFORM_PACKING) + png_set_packing(png_ptr); +#endif + +#ifdef PNG_WRITE_SWAP_ALPHA_SUPPORTED + /* Swap location of alpha bytes from ARGB to RGBA */ + if (transforms & PNG_TRANSFORM_SWAP_ALPHA) + png_set_swap_alpha(png_ptr); +#endif + +#ifdef PNG_WRITE_FILLER_SUPPORTED + /* Pack XRGB/RGBX/ARGB/RGBA into RGB (4 channels -> 3 channels) */ + if (transforms & PNG_TRANSFORM_STRIP_FILLER_AFTER) + png_set_filler(png_ptr, 0, PNG_FILLER_AFTER); + + else if (transforms & PNG_TRANSFORM_STRIP_FILLER_BEFORE) + png_set_filler(png_ptr, 0, PNG_FILLER_BEFORE); +#endif + +#ifdef PNG_WRITE_BGR_SUPPORTED + /* Flip BGR pixels to RGB */ + if (transforms & PNG_TRANSFORM_BGR) + png_set_bgr(png_ptr); +#endif + +#ifdef PNG_WRITE_SWAP_SUPPORTED + /* Swap bytes of 16-bit files to most significant byte first */ + if (transforms & PNG_TRANSFORM_SWAP_ENDIAN) + png_set_swap(png_ptr); +#endif + +#ifdef PNG_WRITE_PACKSWAP_SUPPORTED + /* Swap bits of 1, 2, 4 bit packed pixel formats */ + if (transforms & PNG_TRANSFORM_PACKSWAP) + png_set_packswap(png_ptr); +#endif + +#ifdef PNG_WRITE_INVERT_ALPHA_SUPPORTED + /* Invert the alpha channel from opacity to transparency */ + if (transforms & PNG_TRANSFORM_INVERT_ALPHA) + png_set_invert_alpha(png_ptr); +#endif + + /* ----------------------- end of transformations ------------------- */ + + /* Write the bits */ + if (info_ptr->valid & PNG_INFO_IDAT) + png_write_image(png_ptr, info_ptr->row_pointers); + + /* It is REQUIRED to call this to finish writing the rest of the file */ + png_write_end(png_ptr, info_ptr); + + PNG_UNUSED(transforms) /* Quiet compiler warnings */ + PNG_UNUSED(params) +} +#endif + + +#ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED +#ifdef PNG_STDIO_SUPPORTED /* currently required for png_image_write_* */ +/* Initialize the write structure - general purpose utility. */ +static int +png_image_write_init(png_imagep image) +{ + png_structp png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, image, + png_safe_error, png_safe_warning); + + if (png_ptr != NULL) + { + png_infop info_ptr = png_create_info_struct(png_ptr); + + if (info_ptr != NULL) + { + png_controlp control = png_voidcast(png_controlp, + png_malloc_warn(png_ptr, (sizeof *control))); + + if (control != NULL) + { + memset(control, 0, (sizeof *control)); + + control->png_ptr = png_ptr; + control->info_ptr = info_ptr; + control->for_write = 1; + + image->opaque = control; + return 1; + } + + /* Error clean up */ + png_destroy_info_struct(png_ptr, &info_ptr); + } + + png_destroy_write_struct(&png_ptr, NULL); + } + + return png_image_error(image, "png_image_write_: out of memory"); +} + +/* Arguments to png_image_write_main: */ +typedef struct +{ + /* Arguments: */ + png_imagep image; + png_const_voidp buffer; + png_int_32 row_stride; + png_const_voidp colormap; + int convert_to_8bit; + /* Local variables: */ + png_const_voidp first_row; + ptrdiff_t row_bytes; + png_voidp local_row; +} png_image_write_control; + +/* Write png_uint_16 input to a 16-bit PNG; the png_ptr has already been set to + * do any necessary byte swapping. The component order is defined by the + * png_image format value. + */ +static int +png_write_image_16bit(png_voidp argument) +{ + png_image_write_control *display = png_voidcast(png_image_write_control*, + argument); + png_imagep image = display->image; + png_structrp png_ptr = image->opaque->png_ptr; + + png_const_uint_16p input_row = png_voidcast(png_const_uint_16p, + display->first_row); + png_uint_16p output_row = png_voidcast(png_uint_16p, display->local_row); + png_uint_16p row_end; + const int channels = (image->format & PNG_FORMAT_FLAG_COLOR) ? 3 : 1; + int aindex = 0; + png_uint_32 y = image->height; + + if (image->format & PNG_FORMAT_FLAG_ALPHA) + { + if (image->format & PNG_FORMAT_FLAG_AFIRST) + { + aindex = -1; + ++input_row; /* To point to the first component */ + ++output_row; + } + + else + aindex = channels; + } + + else + png_error(png_ptr, "png_write_image: internal call error"); + + /* Work out the output row end and count over this, note that the increment + * above to 'row' means that row_end can actually be beyond the end of the + * row; this is correct. + */ + row_end = output_row + image->width * (channels+1); + + while (y-- > 0) + { + png_const_uint_16p in_ptr = input_row; + png_uint_16p out_ptr = output_row; + + while (out_ptr < row_end) + { + const png_uint_16 alpha = in_ptr[aindex]; + png_uint_32 reciprocal = 0; + int c; + + out_ptr[aindex] = alpha; + + /* Calculate a reciprocal. The correct calculation is simply + * component/alpha*65535 << 15. (I.e. 15 bits of precision); this + * allows correct rounding by adding .5 before the shift. 'reciprocal' + * is only initialized when required. + */ + if (alpha > 0 && alpha < 65535) + reciprocal = ((0xffff<<15)+(alpha>>1))/alpha; + + c = channels; + do /* always at least one channel */ + { + png_uint_16 component = *in_ptr++; + + /* The following gives 65535 for an alpha of 0, which is fine, + * otherwise if 0/0 is represented as some other value there is more + * likely to be a discontinuity which will probably damage + * compression when moving from a fully transparent area to a + * nearly transparent one. (The assumption here is that opaque + * areas tend not to be 0 intensity.) + */ + if (component >= alpha) + component = 65535; + + /* component 0 && alpha < 65535) + { + png_uint_32 calc = component * reciprocal; + calc += 16384; /* round to nearest */ + component = (png_uint_16)(calc >> 15); + } + + *out_ptr++ = component; + } + while (--c > 0); + + /* Skip to next component (skip the intervening alpha channel) */ + ++in_ptr; + ++out_ptr; + } + + png_write_row(png_ptr, png_voidcast(png_const_bytep, display->local_row)); + input_row += display->row_bytes/(sizeof (png_uint_16)); + } + + return 1; +} + +/* Given 16-bit input (1 to 4 channels) write 8-bit output. If an alpha channel + * is present it must be removed from the components, the components are then + * written in sRGB encoding. No components are added or removed. + * + * Calculate an alpha reciprocal to reverse pre-multiplication. As above the + * calculation can be done to 15 bits of accuracy; however, the output needs to + * be scaled in the range 0..255*65535, so include that scaling here. + */ +#define UNP_RECIPROCAL(alpha) ((((0xffff*0xff)<<7)+(alpha>>1))/alpha) + +static png_byte +png_unpremultiply(png_uint_32 component, png_uint_32 alpha, + png_uint_32 reciprocal/*from the above macro*/) +{ + /* The following gives 1.0 for an alpha of 0, which is fine, otherwise if 0/0 + * is represented as some other value there is more likely to be a + * discontinuity which will probably damage compression when moving from a + * fully transparent area to a nearly transparent one. (The assumption here + * is that opaque areas tend not to be 0 intensity.) + * + * There is a rounding problem here; if alpha is less than 128 it will end up + * as 0 when scaled to 8 bits. To avoid introducing spurious colors into the + * output change for this too. + */ + if (component >= alpha || alpha < 128) + return 255; + + /* component 0) + { + /* The test is that alpha/257 (rounded) is less than 255, the first value + * that becomes 255 is 65407. + * NOTE: this must agree with the PNG_DIV257 macro (which must, therefore, + * be exact!) [Could also test reciprocal != 0] + */ + if (alpha < 65407) + { + component *= reciprocal; + component += 64; /* round to nearest */ + component >>= 7; + } + + else + component *= 255; + + /* Convert the component to sRGB. */ + return (png_byte)PNG_sRGB_FROM_LINEAR(component); + } + + else + return 0; +} + +static int +png_write_image_8bit(png_voidp argument) +{ + png_image_write_control *display = png_voidcast(png_image_write_control*, + argument); + png_imagep image = display->image; + png_structrp png_ptr = image->opaque->png_ptr; + + png_const_uint_16p input_row = png_voidcast(png_const_uint_16p, + display->first_row); + png_bytep output_row = png_voidcast(png_bytep, display->local_row); + png_uint_32 y = image->height; + const int channels = (image->format & PNG_FORMAT_FLAG_COLOR) ? 3 : 1; + + if (image->format & PNG_FORMAT_FLAG_ALPHA) + { + png_bytep row_end; + int aindex; + + if (image->format & PNG_FORMAT_FLAG_AFIRST) + { + aindex = -1; + ++input_row; /* To point to the first component */ + ++output_row; + } + + else + aindex = channels; + + /* Use row_end in place of a loop counter: */ + row_end = output_row + image->width * (channels+1); + + while (y-- > 0) + { + png_const_uint_16p in_ptr = input_row; + png_bytep out_ptr = output_row; + + while (out_ptr < row_end) + { + png_uint_16 alpha = in_ptr[aindex]; + png_byte alphabyte = (png_byte)PNG_DIV257(alpha); + png_uint_32 reciprocal = 0; + int c; + + /* Scale and write the alpha channel. */ + out_ptr[aindex] = alphabyte; + + if (alphabyte > 0 && alphabyte < 255) + reciprocal = UNP_RECIPROCAL(alpha); + + c = channels; + do /* always at least one channel */ + *out_ptr++ = png_unpremultiply(*in_ptr++, alpha, reciprocal); + while (--c > 0); + + /* Skip to next component (skip the intervening alpha channel) */ + ++in_ptr; + ++out_ptr; + } /* while out_ptr < row_end */ + + png_write_row(png_ptr, png_voidcast(png_const_bytep, + display->local_row)); + input_row += display->row_bytes/(sizeof (png_uint_16)); + } /* while y */ + } + + else + { + /* No alpha channel, so the row_end really is the end of the row and it + * is sufficient to loop over the components one by one. + */ + png_bytep row_end = output_row + image->width * channels; + + while (y-- > 0) + { + png_const_uint_16p in_ptr = input_row; + png_bytep out_ptr = output_row; + + while (out_ptr < row_end) + { + png_uint_32 component = *in_ptr++; + + component *= 255; + *out_ptr++ = (png_byte)PNG_sRGB_FROM_LINEAR(component); + } + + png_write_row(png_ptr, output_row); + input_row += display->row_bytes/(sizeof (png_uint_16)); + } + } + + return 1; +} + +static void +png_image_set_PLTE(png_image_write_control *display) +{ + const png_imagep image = display->image; + const void *cmap = display->colormap; + const int entries = image->colormap_entries > 256 ? 256 : + (int)image->colormap_entries; + + /* NOTE: the caller must check for cmap != NULL and entries != 0 */ + const png_uint_32 format = image->format; + const int channels = PNG_IMAGE_SAMPLE_CHANNELS(format); + +# ifdef PNG_FORMAT_BGR_SUPPORTED + const int afirst = (format & PNG_FORMAT_FLAG_AFIRST) != 0 && + (format & PNG_FORMAT_FLAG_ALPHA) != 0; +# else +# define afirst 0 +# endif + +# ifdef PNG_FORMAT_BGR_SUPPORTED + const int bgr = (format & PNG_FORMAT_FLAG_BGR) ? 2 : 0; +# else +# define bgr 0 +# endif + + int i, num_trans; + png_color palette[256]; + png_byte tRNS[256]; + + memset(tRNS, 255, (sizeof tRNS)); + memset(palette, 0, (sizeof palette)); + + for (i=num_trans=0; i= 3) /* RGB */ + { + palette[i].blue = (png_byte)PNG_sRGB_FROM_LINEAR(255 * + entry[(2 ^ bgr)]); + palette[i].green = (png_byte)PNG_sRGB_FROM_LINEAR(255 * + entry[1]); + palette[i].red = (png_byte)PNG_sRGB_FROM_LINEAR(255 * + entry[bgr]); + } + + else /* Gray */ + palette[i].blue = palette[i].red = palette[i].green = + (png_byte)PNG_sRGB_FROM_LINEAR(255 * *entry); + } + + else /* alpha */ + { + png_uint_16 alpha = entry[afirst ? 0 : channels-1]; + png_byte alphabyte = (png_byte)PNG_DIV257(alpha); + png_uint_32 reciprocal = 0; + + /* Calculate a reciprocal, as in the png_write_image_8bit code above + * this is designed to produce a value scaled to 255*65535 when + * divided by 128 (i.e. asr 7). + */ + if (alphabyte > 0 && alphabyte < 255) + reciprocal = (((0xffff*0xff)<<7)+(alpha>>1))/alpha; + + tRNS[i] = alphabyte; + if (alphabyte < 255) + num_trans = i+1; + + if (channels >= 3) /* RGB */ + { + palette[i].blue = png_unpremultiply(entry[afirst + (2 ^ bgr)], + alpha, reciprocal); + palette[i].green = png_unpremultiply(entry[afirst + 1], alpha, + reciprocal); + palette[i].red = png_unpremultiply(entry[afirst + bgr], alpha, + reciprocal); + } + + else /* gray */ + palette[i].blue = palette[i].red = palette[i].green = + png_unpremultiply(entry[afirst], alpha, reciprocal); + } + } + + else /* Color-map has sRGB values */ + { + png_const_bytep entry = png_voidcast(png_const_bytep, cmap); + + entry += i * channels; + + switch (channels) + { + case 4: + tRNS[i] = entry[afirst ? 0 : 3]; + if (tRNS[i] < 255) + num_trans = i+1; + /* FALL THROUGH */ + case 3: + palette[i].blue = entry[afirst + (2 ^ bgr)]; + palette[i].green = entry[afirst + 1]; + palette[i].red = entry[afirst + bgr]; + break; + + case 2: + tRNS[i] = entry[1 ^ afirst]; + if (tRNS[i] < 255) + num_trans = i+1; + /* FALL THROUGH */ + case 1: + palette[i].blue = palette[i].red = palette[i].green = + entry[afirst]; + break; + + default: + break; + } + } + } + +# ifdef afirst +# undef afirst +# endif +# ifdef bgr +# undef bgr +# endif + + png_set_PLTE(image->opaque->png_ptr, image->opaque->info_ptr, palette, + entries); + + if (num_trans > 0) + png_set_tRNS(image->opaque->png_ptr, image->opaque->info_ptr, tRNS, + num_trans, NULL); + + image->colormap_entries = entries; +} + +static int +png_image_write_main(png_voidp argument) +{ + png_image_write_control *display = png_voidcast(png_image_write_control*, + argument); + png_imagep image = display->image; + png_structrp png_ptr = image->opaque->png_ptr; + png_inforp info_ptr = image->opaque->info_ptr; + png_uint_32 format = image->format; + + int colormap = (format & PNG_FORMAT_FLAG_COLORMAP) != 0; + int linear = !colormap && (format & PNG_FORMAT_FLAG_LINEAR) != 0; /* input */ + int alpha = !colormap && (format & PNG_FORMAT_FLAG_ALPHA) != 0; + int write_16bit = linear && !colormap && !display->convert_to_8bit; + +# ifdef PNG_BENIGN_ERRORS_SUPPORTED + /* Make sure we error out on any bad situation */ + png_set_benign_errors(png_ptr, 0/*error*/); +# endif + + /* Default the 'row_stride' parameter if required. */ + if (display->row_stride == 0) + display->row_stride = PNG_IMAGE_ROW_STRIDE(*image); + + /* Set the required transforms then write the rows in the correct order. */ + if (format & PNG_FORMAT_FLAG_COLORMAP) + { + if (display->colormap != NULL && image->colormap_entries > 0) + { + png_uint_32 entries = image->colormap_entries; + + png_set_IHDR(png_ptr, info_ptr, image->width, image->height, + entries > 16 ? 8 : (entries > 4 ? 4 : (entries > 2 ? 2 : 1)), + PNG_COLOR_TYPE_PALETTE, PNG_INTERLACE_NONE, + PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + + png_image_set_PLTE(display); + } + + else + png_error(image->opaque->png_ptr, + "no color-map for color-mapped image"); + } + + else + png_set_IHDR(png_ptr, info_ptr, image->width, image->height, + write_16bit ? 16 : 8, + ((format & PNG_FORMAT_FLAG_COLOR) ? PNG_COLOR_MASK_COLOR : 0) + + ((format & PNG_FORMAT_FLAG_ALPHA) ? PNG_COLOR_MASK_ALPHA : 0), + PNG_INTERLACE_NONE, PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + + /* Counter-intuitively the data transformations must be called *after* + * png_write_info, not before as in the read code, but the 'set' functions + * must still be called before. Just set the color space information, never + * write an interlaced image. + */ + + if (write_16bit) + { + /* The gamma here is 1.0 (linear) and the cHRM chunk matches sRGB. */ + png_set_gAMA_fixed(png_ptr, info_ptr, PNG_GAMMA_LINEAR); + + if (!(image->flags & PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB)) + png_set_cHRM_fixed(png_ptr, info_ptr, + /* color x y */ + /* white */ 31270, 32900, + /* red */ 64000, 33000, + /* green */ 30000, 60000, + /* blue */ 15000, 6000 + ); + } + + else if (!(image->flags & PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB)) + png_set_sRGB(png_ptr, info_ptr, PNG_sRGB_INTENT_PERCEPTUAL); + + /* Else writing an 8-bit file and the *colors* aren't sRGB, but the 8-bit + * space must still be gamma encoded. + */ + else + png_set_gAMA_fixed(png_ptr, info_ptr, PNG_GAMMA_sRGB_INVERSE); + + /* Write the file header. */ + png_write_info(png_ptr, info_ptr); + + /* Now set up the data transformations (*after* the header is written), + * remove the handled transformations from the 'format' flags for checking. + * + * First check for a little endian system if writing 16 bit files. + */ + if (write_16bit) + { + PNG_CONST png_uint_16 le = 0x0001; + + if (*(png_const_bytep)&le) + png_set_swap(png_ptr); + } + +# ifdef PNG_SIMPLIFIED_WRITE_BGR_SUPPORTED + if (format & PNG_FORMAT_FLAG_BGR) + { + if (!colormap && (format & PNG_FORMAT_FLAG_COLOR) != 0) + png_set_bgr(png_ptr); + format &= ~PNG_FORMAT_FLAG_BGR; + } +# endif + +# ifdef PNG_SIMPLIFIED_WRITE_AFIRST_SUPPORTED + if (format & PNG_FORMAT_FLAG_AFIRST) + { + if (!colormap && (format & PNG_FORMAT_FLAG_ALPHA) != 0) + png_set_swap_alpha(png_ptr); + format &= ~PNG_FORMAT_FLAG_AFIRST; + } +# endif + + /* If there are 16 or fewer color-map entries we wrote a lower bit depth + * above, but the application data is still byte packed. + */ + if (colormap && image->colormap_entries <= 16) + png_set_packing(png_ptr); + + /* That should have handled all (both) the transforms. */ + if ((format & ~(png_uint_32)(PNG_FORMAT_FLAG_COLOR | PNG_FORMAT_FLAG_LINEAR | + PNG_FORMAT_FLAG_ALPHA | PNG_FORMAT_FLAG_COLORMAP)) != 0) + png_error(png_ptr, "png_write_image: unsupported transformation"); + + { + png_const_bytep row = png_voidcast(png_const_bytep, display->buffer); + ptrdiff_t row_bytes = display->row_stride; + + if (linear) + row_bytes *= (sizeof (png_uint_16)); + + if (row_bytes < 0) + row += (image->height-1) * (-row_bytes); + + display->first_row = row; + display->row_bytes = row_bytes; + } + + /* Apply 'fast' options if the flag is set. */ + if ((image->flags & PNG_IMAGE_FLAG_FAST) != 0) + { + png_set_filter(png_ptr, PNG_FILTER_TYPE_BASE, PNG_NO_FILTERS); + /* NOTE: determined by experiment using pngstest, this reflects some + * balance between the time to write the image once and the time to read + * it about 50 times. The speed-up in pngstest was about 10-20% of the + * total (user) time on a heavily loaded system. + */ + png_set_compression_level(png_ptr, 3); + } + + /* Check for the cases that currently require a pre-transform on the row + * before it is written. This only applies when the input is 16-bit and + * either there is an alpha channel or it is converted to 8-bit. + */ + if ((linear && alpha) || (!colormap && display->convert_to_8bit)) + { + png_bytep row = png_voidcast(png_bytep, png_malloc(png_ptr, + png_get_rowbytes(png_ptr, info_ptr))); + int result; + + display->local_row = row; + if (write_16bit) + result = png_safe_execute(image, png_write_image_16bit, display); + else + result = png_safe_execute(image, png_write_image_8bit, display); + display->local_row = NULL; + + png_free(png_ptr, row); + + /* Skip the 'write_end' on error: */ + if (!result) + return 0; + } + + /* Otherwise this is the case where the input is in a format currently + * supported by the rest of the libpng write code; call it directly. + */ + else + { + png_const_bytep row = png_voidcast(png_const_bytep, display->first_row); + ptrdiff_t row_bytes = display->row_bytes; + png_uint_32 y = image->height; + + while (y-- > 0) + { + png_write_row(png_ptr, row); + row += row_bytes; + } + } + + png_write_end(png_ptr, info_ptr); + return 1; +} + +int PNGAPI +png_image_write_to_stdio(png_imagep image, FILE *file, int convert_to_8bit, + const void *buffer, png_int_32 row_stride, const void *colormap) +{ + /* Write the image to the given (FILE*). */ + if (image != NULL && image->version == PNG_IMAGE_VERSION) + { + if (file != NULL) + { + if (png_image_write_init(image)) + { + png_image_write_control display; + int result; + + /* This is slightly evil, but png_init_io doesn't do anything other + * than this and we haven't changed the standard IO functions so + * this saves a 'safe' function. + */ + image->opaque->png_ptr->io_ptr = file; + + memset(&display, 0, (sizeof display)); + display.image = image; + display.buffer = buffer; + display.row_stride = row_stride; + display.colormap = colormap; + display.convert_to_8bit = convert_to_8bit; + + result = png_safe_execute(image, png_image_write_main, &display); + png_image_free(image); + return result; + } + + else + return 0; + } + + else + return png_image_error(image, + "png_image_write_to_stdio: invalid argument"); + } + + else if (image != NULL) + return png_image_error(image, + "png_image_write_to_stdio: incorrect PNG_IMAGE_VERSION"); + + else + return 0; +} + +int PNGAPI +png_image_write_to_file(png_imagep image, const char *file_name, + int convert_to_8bit, const void *buffer, png_int_32 row_stride, + const void *colormap) +{ + /* Write the image to the named file. */ + if (image != NULL && image->version == PNG_IMAGE_VERSION) + { + if (file_name != NULL) + { + FILE *fp = fopen(file_name, "wb"); + + if (fp != NULL) + { + if (png_image_write_to_stdio(image, fp, convert_to_8bit, buffer, + row_stride, colormap)) + { + int error; /* from fflush/fclose */ + + /* Make sure the file is flushed correctly. */ + if (fflush(fp) == 0 && ferror(fp) == 0) + { + if (fclose(fp) == 0) + return 1; + + error = errno; /* from fclose */ + } + + else + { + error = errno; /* from fflush or ferror */ + (void)fclose(fp); + } + + (void)remove(file_name); + /* The image has already been cleaned up; this is just used to + * set the error (because the original write succeeded). + */ + return png_image_error(image, strerror(error)); + } + + else + { + /* Clean up: just the opened file. */ + (void)fclose(fp); + (void)remove(file_name); + return 0; + } + } + + else + return png_image_error(image, strerror(errno)); + } + + else + return png_image_error(image, + "png_image_write_to_file: invalid argument"); + } + + else if (image != NULL) + return png_image_error(image, + "png_image_write_to_file: incorrect PNG_IMAGE_VERSION"); + + else + return 0; +} +#endif /* PNG_STDIO_SUPPORTED */ +#endif /* SIMPLIFIED_WRITE */ +#endif /* PNG_WRITE_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngwtran.c b/src/SDL2/external/libpng-1.6.2/pngwtran.c new file mode 100644 index 000000000..98703f8c8 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngwtran.c @@ -0,0 +1,637 @@ + +/* pngwtran.c - transforms the data in a row for PNG writers + * + * Last changed in libpng 1.6.0 [February 14, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +#include "pngpriv.h" + +#ifdef PNG_WRITE_SUPPORTED + +#ifdef PNG_WRITE_TRANSFORMS_SUPPORTED +/* Transform the data according to the user's wishes. The order of + * transformations is significant. + */ +void /* PRIVATE */ +png_do_write_transformations(png_structrp png_ptr, png_row_infop row_info) +{ + png_debug(1, "in png_do_write_transformations"); + + if (png_ptr == NULL) + return; + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED + if (png_ptr->transformations & PNG_USER_TRANSFORM) + if (png_ptr->write_user_transform_fn != NULL) + (*(png_ptr->write_user_transform_fn)) /* User write transform + function */ + (png_ptr, /* png_ptr */ + row_info, /* row_info: */ + /* png_uint_32 width; width of row */ + /* png_size_t rowbytes; number of bytes in row */ + /* png_byte color_type; color type of pixels */ + /* png_byte bit_depth; bit depth of samples */ + /* png_byte channels; number of channels (1-4) */ + /* png_byte pixel_depth; bits per pixel (depth*channels) */ + png_ptr->row_buf + 1); /* start of pixel data for row */ +#endif + +#ifdef PNG_WRITE_FILLER_SUPPORTED + if (png_ptr->transformations & PNG_FILLER) + png_do_strip_channel(row_info, png_ptr->row_buf + 1, + !(png_ptr->flags & PNG_FLAG_FILLER_AFTER)); +#endif + +#ifdef PNG_WRITE_PACKSWAP_SUPPORTED + if (png_ptr->transformations & PNG_PACKSWAP) + png_do_packswap(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_WRITE_PACK_SUPPORTED + if (png_ptr->transformations & PNG_PACK) + png_do_pack(row_info, png_ptr->row_buf + 1, + (png_uint_32)png_ptr->bit_depth); +#endif + +#ifdef PNG_WRITE_SWAP_SUPPORTED + if (png_ptr->transformations & PNG_SWAP_BYTES) + png_do_swap(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_WRITE_SHIFT_SUPPORTED + if (png_ptr->transformations & PNG_SHIFT) + png_do_shift(row_info, png_ptr->row_buf + 1, + &(png_ptr->shift)); +#endif + +#ifdef PNG_WRITE_SWAP_ALPHA_SUPPORTED + if (png_ptr->transformations & PNG_SWAP_ALPHA) + png_do_write_swap_alpha(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_WRITE_INVERT_ALPHA_SUPPORTED + if (png_ptr->transformations & PNG_INVERT_ALPHA) + png_do_write_invert_alpha(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_WRITE_BGR_SUPPORTED + if (png_ptr->transformations & PNG_BGR) + png_do_bgr(row_info, png_ptr->row_buf + 1); +#endif + +#ifdef PNG_WRITE_INVERT_SUPPORTED + if (png_ptr->transformations & PNG_INVERT_MONO) + png_do_invert(row_info, png_ptr->row_buf + 1); +#endif +} + +#ifdef PNG_WRITE_PACK_SUPPORTED +/* Pack pixels into bytes. Pass the true bit depth in bit_depth. The + * row_info bit depth should be 8 (one pixel per byte). The channels + * should be 1 (this only happens on grayscale and paletted images). + */ +void /* PRIVATE */ +png_do_pack(png_row_infop row_info, png_bytep row, png_uint_32 bit_depth) +{ + png_debug(1, "in png_do_pack"); + + if (row_info->bit_depth == 8 && + row_info->channels == 1) + { + switch ((int)bit_depth) + { + case 1: + { + png_bytep sp, dp; + int mask, v; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + sp = row; + dp = row; + mask = 0x80; + v = 0; + + for (i = 0; i < row_width; i++) + { + if (*sp != 0) + v |= mask; + + sp++; + + if (mask > 1) + mask >>= 1; + + else + { + mask = 0x80; + *dp = (png_byte)v; + dp++; + v = 0; + } + } + + if (mask != 0x80) + *dp = (png_byte)v; + + break; + } + + case 2: + { + png_bytep sp, dp; + int shift, v; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + sp = row; + dp = row; + shift = 6; + v = 0; + + for (i = 0; i < row_width; i++) + { + png_byte value; + + value = (png_byte)(*sp & 0x03); + v |= (value << shift); + + if (shift == 0) + { + shift = 6; + *dp = (png_byte)v; + dp++; + v = 0; + } + + else + shift -= 2; + + sp++; + } + + if (shift != 6) + *dp = (png_byte)v; + + break; + } + + case 4: + { + png_bytep sp, dp; + int shift, v; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + sp = row; + dp = row; + shift = 4; + v = 0; + + for (i = 0; i < row_width; i++) + { + png_byte value; + + value = (png_byte)(*sp & 0x0f); + v |= (value << shift); + + if (shift == 0) + { + shift = 4; + *dp = (png_byte)v; + dp++; + v = 0; + } + + else + shift -= 4; + + sp++; + } + + if (shift != 4) + *dp = (png_byte)v; + + break; + } + + default: + break; + } + + row_info->bit_depth = (png_byte)bit_depth; + row_info->pixel_depth = (png_byte)(bit_depth * row_info->channels); + row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, + row_info->width); + } +} +#endif + +#ifdef PNG_WRITE_SHIFT_SUPPORTED +/* Shift pixel values to take advantage of whole range. Pass the + * true number of bits in bit_depth. The row should be packed + * according to row_info->bit_depth. Thus, if you had a row of + * bit depth 4, but the pixels only had values from 0 to 7, you + * would pass 3 as bit_depth, and this routine would translate the + * data to 0 to 15. + */ +void /* PRIVATE */ +png_do_shift(png_row_infop row_info, png_bytep row, + png_const_color_8p bit_depth) +{ + png_debug(1, "in png_do_shift"); + + if (row_info->color_type != PNG_COLOR_TYPE_PALETTE) + { + int shift_start[4], shift_dec[4]; + int channels = 0; + + if (row_info->color_type & PNG_COLOR_MASK_COLOR) + { + shift_start[channels] = row_info->bit_depth - bit_depth->red; + shift_dec[channels] = bit_depth->red; + channels++; + + shift_start[channels] = row_info->bit_depth - bit_depth->green; + shift_dec[channels] = bit_depth->green; + channels++; + + shift_start[channels] = row_info->bit_depth - bit_depth->blue; + shift_dec[channels] = bit_depth->blue; + channels++; + } + + else + { + shift_start[channels] = row_info->bit_depth - bit_depth->gray; + shift_dec[channels] = bit_depth->gray; + channels++; + } + + if (row_info->color_type & PNG_COLOR_MASK_ALPHA) + { + shift_start[channels] = row_info->bit_depth - bit_depth->alpha; + shift_dec[channels] = bit_depth->alpha; + channels++; + } + + /* With low row depths, could only be grayscale, so one channel */ + if (row_info->bit_depth < 8) + { + png_bytep bp = row; + png_size_t i; + unsigned int mask; + png_size_t row_bytes = row_info->rowbytes; + + if (bit_depth->gray == 1 && row_info->bit_depth == 2) + mask = 0x55; + + else if (row_info->bit_depth == 4 && bit_depth->gray == 3) + mask = 0x11; + + else + mask = 0xff; + + for (i = 0; i < row_bytes; i++, bp++) + { + int j; + unsigned int v, out; + + v = *bp; + out = 0; + + for (j = shift_start[0]; j > -shift_dec[0]; j -= shift_dec[0]) + { + if (j > 0) + out |= v << j; + + else + out |= (v >> (-j)) & mask; + } + + *bp = (png_byte)(out & 0xff); + } + } + + else if (row_info->bit_depth == 8) + { + png_bytep bp = row; + png_uint_32 i; + png_uint_32 istop = channels * row_info->width; + + for (i = 0; i < istop; i++, bp++) + { + + const unsigned int c = i%channels; + int j; + unsigned int v, out; + + v = *bp; + out = 0; + + for (j = shift_start[c]; j > -shift_dec[c]; j -= shift_dec[c]) + { + if (j > 0) + out |= v << j; + + else + out |= v >> (-j); + } + + *bp = (png_byte)(out & 0xff); + } + } + + else + { + png_bytep bp; + png_uint_32 i; + png_uint_32 istop = channels * row_info->width; + + for (bp = row, i = 0; i < istop; i++) + { + const unsigned int c = i%channels; + int j; + unsigned int value, v; + + v = png_get_uint_16(bp); + value = 0; + + for (j = shift_start[c]; j > -shift_dec[c]; j -= shift_dec[c]) + { + if (j > 0) + value |= v << j; + + else + value |= v >> (-j); + } + *bp++ = (png_byte)((value >> 8) & 0xff); + *bp++ = (png_byte)(value & 0xff); + } + } + } +} +#endif + +#ifdef PNG_WRITE_SWAP_ALPHA_SUPPORTED +void /* PRIVATE */ +png_do_write_swap_alpha(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_write_swap_alpha"); + + { + if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + { + if (row_info->bit_depth == 8) + { + /* This converts from ARGB to RGBA */ + png_bytep sp, dp; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + for (i = 0, sp = dp = row; i < row_width; i++) + { + png_byte save = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = save; + } + } + +#ifdef PNG_WRITE_16BIT_SUPPORTED + else + { + /* This converts from AARRGGBB to RRGGBBAA */ + png_bytep sp, dp; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + for (i = 0, sp = dp = row; i < row_width; i++) + { + png_byte save[2]; + save[0] = *(sp++); + save[1] = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = save[0]; + *(dp++) = save[1]; + } + } +#endif /* PNG_WRITE_16BIT_SUPPORTED */ + } + + else if (row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + { + if (row_info->bit_depth == 8) + { + /* This converts from AG to GA */ + png_bytep sp, dp; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + for (i = 0, sp = dp = row; i < row_width; i++) + { + png_byte save = *(sp++); + *(dp++) = *(sp++); + *(dp++) = save; + } + } + +#ifdef PNG_WRITE_16BIT_SUPPORTED + else + { + /* This converts from AAGG to GGAA */ + png_bytep sp, dp; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + for (i = 0, sp = dp = row; i < row_width; i++) + { + png_byte save[2]; + save[0] = *(sp++); + save[1] = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = save[0]; + *(dp++) = save[1]; + } + } +#endif /* PNG_WRITE_16BIT_SUPPORTED */ + } + } +} +#endif + +#ifdef PNG_WRITE_INVERT_ALPHA_SUPPORTED +void /* PRIVATE */ +png_do_write_invert_alpha(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_write_invert_alpha"); + + { + if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + { + if (row_info->bit_depth == 8) + { + /* This inverts the alpha channel in RGBA */ + png_bytep sp, dp; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + for (i = 0, sp = dp = row; i < row_width; i++) + { + /* Does nothing + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + */ + sp+=3; dp = sp; + *(dp++) = (png_byte)(255 - *(sp++)); + } + } + +#ifdef PNG_WRITE_16BIT_SUPPORTED + else + { + /* This inverts the alpha channel in RRGGBBAA */ + png_bytep sp, dp; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + for (i = 0, sp = dp = row; i < row_width; i++) + { + /* Does nothing + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + *(dp++) = *(sp++); + */ + sp+=6; dp = sp; + *(dp++) = (png_byte)(255 - *(sp++)); + *(dp++) = (png_byte)(255 - *(sp++)); + } + } +#endif /* PNG_WRITE_16BIT_SUPPORTED */ + } + + else if (row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + { + if (row_info->bit_depth == 8) + { + /* This inverts the alpha channel in GA */ + png_bytep sp, dp; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + for (i = 0, sp = dp = row; i < row_width; i++) + { + *(dp++) = *(sp++); + *(dp++) = (png_byte)(255 - *(sp++)); + } + } + +#ifdef PNG_WRITE_16BIT_SUPPORTED + else + { + /* This inverts the alpha channel in GGAA */ + png_bytep sp, dp; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + for (i = 0, sp = dp = row; i < row_width; i++) + { + /* Does nothing + *(dp++) = *(sp++); + *(dp++) = *(sp++); + */ + sp+=2; dp = sp; + *(dp++) = (png_byte)(255 - *(sp++)); + *(dp++) = (png_byte)(255 - *(sp++)); + } + } +#endif /* PNG_WRITE_16BIT_SUPPORTED */ + } + } +} +#endif +#endif /* PNG_WRITE_TRANSFORMS_SUPPORTED */ + +#ifdef PNG_MNG_FEATURES_SUPPORTED +/* Undoes intrapixel differencing */ +void /* PRIVATE */ +png_do_write_intrapixel(png_row_infop row_info, png_bytep row) +{ + png_debug(1, "in png_do_write_intrapixel"); + + if ((row_info->color_type & PNG_COLOR_MASK_COLOR)) + { + int bytes_per_pixel; + png_uint_32 row_width = row_info->width; + if (row_info->bit_depth == 8) + { + png_bytep rp; + png_uint_32 i; + + if (row_info->color_type == PNG_COLOR_TYPE_RGB) + bytes_per_pixel = 3; + + else if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + bytes_per_pixel = 4; + + else + return; + + for (i = 0, rp = row; i < row_width; i++, rp += bytes_per_pixel) + { + *(rp) = (png_byte)((*rp - *(rp + 1)) & 0xff); + *(rp + 2) = (png_byte)((*(rp + 2) - *(rp + 1)) & 0xff); + } + } + +#ifdef PNG_WRITE_16BIT_SUPPORTED + else if (row_info->bit_depth == 16) + { + png_bytep rp; + png_uint_32 i; + + if (row_info->color_type == PNG_COLOR_TYPE_RGB) + bytes_per_pixel = 6; + + else if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA) + bytes_per_pixel = 8; + + else + return; + + for (i = 0, rp = row; i < row_width; i++, rp += bytes_per_pixel) + { + png_uint_32 s0 = (*(rp ) << 8) | *(rp + 1); + png_uint_32 s1 = (*(rp + 2) << 8) | *(rp + 3); + png_uint_32 s2 = (*(rp + 4) << 8) | *(rp + 5); + png_uint_32 red = (png_uint_32)((s0 - s1) & 0xffffL); + png_uint_32 blue = (png_uint_32)((s2 - s1) & 0xffffL); + *(rp ) = (png_byte)((red >> 8) & 0xff); + *(rp + 1) = (png_byte)(red & 0xff); + *(rp + 4) = (png_byte)((blue >> 8) & 0xff); + *(rp + 5) = (png_byte)(blue & 0xff); + } + } +#endif /* PNG_WRITE_16BIT_SUPPORTED */ + } +} +#endif /* PNG_MNG_FEATURES_SUPPORTED */ +#endif /* PNG_WRITE_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/pngwutil.c b/src/SDL2/external/libpng-1.6.2/pngwutil.c new file mode 100644 index 000000000..49e6a2d21 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/pngwutil.c @@ -0,0 +1,3023 @@ + +/* pngwutil.c - utilities to write a PNG file + * + * Last changed in libpng 1.6.2 [April 25, 2013] + * Copyright (c) 1998-2013 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +#include "pngpriv.h" + +#ifdef PNG_WRITE_SUPPORTED + +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +/* Place a 32-bit number into a buffer in PNG byte order. We work + * with unsigned numbers for convenience, although one supported + * ancillary chunk uses signed (two's complement) numbers. + */ +void PNGAPI +png_save_uint_32(png_bytep buf, png_uint_32 i) +{ + buf[0] = (png_byte)((i >> 24) & 0xff); + buf[1] = (png_byte)((i >> 16) & 0xff); + buf[2] = (png_byte)((i >> 8) & 0xff); + buf[3] = (png_byte)(i & 0xff); +} + +/* Place a 16-bit number into a buffer in PNG byte order. + * The parameter is declared unsigned int, not png_uint_16, + * just to avoid potential problems on pre-ANSI C compilers. + */ +void PNGAPI +png_save_uint_16(png_bytep buf, unsigned int i) +{ + buf[0] = (png_byte)((i >> 8) & 0xff); + buf[1] = (png_byte)(i & 0xff); +} +#endif + +/* Simple function to write the signature. If we have already written + * the magic bytes of the signature, or more likely, the PNG stream is + * being embedded into another stream and doesn't need its own signature, + * we should call png_set_sig_bytes() to tell libpng how many of the + * bytes have already been written. + */ +void PNGAPI +png_write_sig(png_structrp png_ptr) +{ + png_byte png_signature[8] = {137, 80, 78, 71, 13, 10, 26, 10}; + +#ifdef PNG_IO_STATE_SUPPORTED + /* Inform the I/O callback that the signature is being written */ + png_ptr->io_state = PNG_IO_WRITING | PNG_IO_SIGNATURE; +#endif + + /* Write the rest of the 8 byte signature */ + png_write_data(png_ptr, &png_signature[png_ptr->sig_bytes], + (png_size_t)(8 - png_ptr->sig_bytes)); + + if (png_ptr->sig_bytes < 3) + png_ptr->mode |= PNG_HAVE_PNG_SIGNATURE; +} + +/* Write the start of a PNG chunk. The type is the chunk type. + * The total_length is the sum of the lengths of all the data you will be + * passing in png_write_chunk_data(). + */ +static void +png_write_chunk_header(png_structrp png_ptr, png_uint_32 chunk_name, + png_uint_32 length) +{ + png_byte buf[8]; + +#if defined(PNG_DEBUG) && (PNG_DEBUG > 0) + PNG_CSTRING_FROM_CHUNK(buf, chunk_name); + png_debug2(0, "Writing %s chunk, length = %lu", buf, (unsigned long)length); +#endif + + if (png_ptr == NULL) + return; + +#ifdef PNG_IO_STATE_SUPPORTED + /* Inform the I/O callback that the chunk header is being written. + * PNG_IO_CHUNK_HDR requires a single I/O call. + */ + png_ptr->io_state = PNG_IO_WRITING | PNG_IO_CHUNK_HDR; +#endif + + /* Write the length and the chunk name */ + png_save_uint_32(buf, length); + png_save_uint_32(buf + 4, chunk_name); + png_write_data(png_ptr, buf, 8); + + /* Put the chunk name into png_ptr->chunk_name */ + png_ptr->chunk_name = chunk_name; + + /* Reset the crc and run it over the chunk name */ + png_reset_crc(png_ptr); + + png_calculate_crc(png_ptr, buf + 4, 4); + +#ifdef PNG_IO_STATE_SUPPORTED + /* Inform the I/O callback that chunk data will (possibly) be written. + * PNG_IO_CHUNK_DATA does NOT require a specific number of I/O calls. + */ + png_ptr->io_state = PNG_IO_WRITING | PNG_IO_CHUNK_DATA; +#endif +} + +void PNGAPI +png_write_chunk_start(png_structrp png_ptr, png_const_bytep chunk_string, + png_uint_32 length) +{ + png_write_chunk_header(png_ptr, PNG_CHUNK_FROM_STRING(chunk_string), length); +} + +/* Write the data of a PNG chunk started with png_write_chunk_header(). + * Note that multiple calls to this function are allowed, and that the + * sum of the lengths from these calls *must* add up to the total_length + * given to png_write_chunk_header(). + */ +void PNGAPI +png_write_chunk_data(png_structrp png_ptr, png_const_bytep data, + png_size_t length) +{ + /* Write the data, and run the CRC over it */ + if (png_ptr == NULL) + return; + + if (data != NULL && length > 0) + { + png_write_data(png_ptr, data, length); + + /* Update the CRC after writing the data, + * in case that the user I/O routine alters it. + */ + png_calculate_crc(png_ptr, data, length); + } +} + +/* Finish a chunk started with png_write_chunk_header(). */ +void PNGAPI +png_write_chunk_end(png_structrp png_ptr) +{ + png_byte buf[4]; + + if (png_ptr == NULL) return; + +#ifdef PNG_IO_STATE_SUPPORTED + /* Inform the I/O callback that the chunk CRC is being written. + * PNG_IO_CHUNK_CRC requires a single I/O function call. + */ + png_ptr->io_state = PNG_IO_WRITING | PNG_IO_CHUNK_CRC; +#endif + + /* Write the crc in a single operation */ + png_save_uint_32(buf, png_ptr->crc); + + png_write_data(png_ptr, buf, (png_size_t)4); +} + +/* Write a PNG chunk all at once. The type is an array of ASCII characters + * representing the chunk name. The array must be at least 4 bytes in + * length, and does not need to be null terminated. To be safe, pass the + * pre-defined chunk names here, and if you need a new one, define it + * where the others are defined. The length is the length of the data. + * All the data must be present. If that is not possible, use the + * png_write_chunk_start(), png_write_chunk_data(), and png_write_chunk_end() + * functions instead. + */ +static void +png_write_complete_chunk(png_structrp png_ptr, png_uint_32 chunk_name, + png_const_bytep data, png_size_t length) +{ + if (png_ptr == NULL) + return; + + /* On 64 bit architectures 'length' may not fit in a png_uint_32. */ + if (length > PNG_UINT_31_MAX) + png_error(png_ptr, "length exceeds PNG maxima"); + + png_write_chunk_header(png_ptr, chunk_name, (png_uint_32)length); + png_write_chunk_data(png_ptr, data, length); + png_write_chunk_end(png_ptr); +} + +/* This is the API that calls the internal function above. */ +void PNGAPI +png_write_chunk(png_structrp png_ptr, png_const_bytep chunk_string, + png_const_bytep data, png_size_t length) +{ + png_write_complete_chunk(png_ptr, PNG_CHUNK_FROM_STRING(chunk_string), data, + length); +} + +/* This is used below to find the size of an image to pass to png_deflate_claim, + * so it only needs to be accurate if the size is less than 16384 bytes (the + * point at which a lower LZ window size can be used.) + */ +static png_alloc_size_t +png_image_size(png_structrp png_ptr) +{ + /* Only return sizes up to the maximum of a png_uint_32, do this by limiting + * the width and height used to 15 bits. + */ + png_uint_32 h = png_ptr->height; + + if (png_ptr->rowbytes < 32768 && h < 32768) + { + if (png_ptr->interlaced) + { + /* Interlacing makes the image larger because of the replication of + * both the filter byte and the padding to a byte boundary. + */ + png_uint_32 w = png_ptr->width; + unsigned int pd = png_ptr->pixel_depth; + png_alloc_size_t cb_base; + int pass; + + for (cb_base=0, pass=0; pass<=6; ++pass) + { + png_uint_32 pw = PNG_PASS_COLS(w, pass); + + if (pw > 0) + cb_base += (PNG_ROWBYTES(pd, pw)+1) * PNG_PASS_ROWS(h, pass); + } + + return cb_base; + } + + else + return (png_ptr->rowbytes+1) * h; + } + + else + return 0xffffffffU; +} + +#ifdef PNG_WRITE_OPTIMIZE_CMF_SUPPORTED + /* This is the code to hack the first two bytes of the deflate stream (the + * deflate header) to correct the windowBits value to match the actual data + * size. Note that the second argument is the *uncompressed* size but the + * first argument is the *compressed* data (and it must be deflate + * compressed.) + */ +static void +optimize_cmf(png_bytep data, png_alloc_size_t data_size) +{ + /* Optimize the CMF field in the zlib stream. The resultant zlib stream is + * still compliant to the stream specification. + */ + if (data_size <= 16384) /* else windowBits must be 15 */ + { + unsigned int z_cmf = data[0]; /* zlib compression method and flags */ + + if ((z_cmf & 0x0f) == 8 && (z_cmf & 0xf0) <= 0x70) + { + unsigned int z_cinfo; + unsigned int half_z_window_size; + + z_cinfo = z_cmf >> 4; + half_z_window_size = 1U << (z_cinfo + 7); + + if (data_size <= half_z_window_size) /* else no change */ + { + unsigned int tmp; + + do + { + half_z_window_size >>= 1; + --z_cinfo; + } + while (z_cinfo > 0 && data_size <= half_z_window_size); + + z_cmf = (z_cmf & 0x0f) | (z_cinfo << 4); + + data[0] = (png_byte)z_cmf; + tmp = data[1] & 0xe0; + tmp += 0x1f - ((z_cmf << 8) + tmp) % 0x1f; + data[1] = (png_byte)tmp; + } + } + } +} +#else +# define optimize_cmf(dp,dl) ((void)0) +#endif /* PNG_WRITE_OPTIMIZE_CMF_SUPPORTED */ + +/* Initialize the compressor for the appropriate type of compression. */ +static int +png_deflate_claim(png_structrp png_ptr, png_uint_32 owner, + png_alloc_size_t data_size) +{ + if (png_ptr->zowner != 0) + { + char msg[64]; + + PNG_STRING_FROM_CHUNK(msg, owner); + msg[4] = ':'; + msg[5] = ' '; + PNG_STRING_FROM_CHUNK(msg+6, png_ptr->zowner); + /* So the message that results is " using zstream"; this is an + * internal error, but is very useful for debugging. i18n requirements + * are minimal. + */ + (void)png_safecat(msg, (sizeof msg), 10, " using zstream"); +# if PNG_LIBPNG_BUILD_BASE_TYPE >= PNG_LIBPNG_BUILD_RC + png_warning(png_ptr, msg); + + /* Attempt sane error recovery */ + if (png_ptr->zowner == png_IDAT) /* don't steal from IDAT */ + { + png_ptr->zstream.msg = PNGZ_MSG_CAST("in use by IDAT"); + return Z_STREAM_ERROR; + } + + png_ptr->zowner = 0; +# else + png_error(png_ptr, msg); +# endif + } + + { + int level = png_ptr->zlib_level; + int method = png_ptr->zlib_method; + int windowBits = png_ptr->zlib_window_bits; + int memLevel = png_ptr->zlib_mem_level; + int strategy; /* set below */ + int ret; /* zlib return code */ + + if (owner == png_IDAT) + { + if (png_ptr->flags & PNG_FLAG_ZLIB_CUSTOM_STRATEGY) + strategy = png_ptr->zlib_strategy; + + else if (png_ptr->do_filter != PNG_FILTER_NONE) + strategy = PNG_Z_DEFAULT_STRATEGY; + + else + strategy = PNG_Z_DEFAULT_NOFILTER_STRATEGY; + } + + else + { +# ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED + level = png_ptr->zlib_text_level; + method = png_ptr->zlib_text_method; + windowBits = png_ptr->zlib_text_window_bits; + memLevel = png_ptr->zlib_text_mem_level; + strategy = png_ptr->zlib_text_strategy; +# else + /* If customization is not supported the values all come from the + * IDAT values except for the strategy, which is fixed to the + * default. (This is the pre-1.6.0 behavior too, although it was + * implemented in a very different way.) + */ + strategy = Z_DEFAULT_STRATEGY; +# endif + } + + /* Adjust 'windowBits' down if larger than 'data_size'; to stop this + * happening just pass 32768 as the data_size parameter. Notice that zlib + * requires an extra 262 bytes in the window in addition to the data to be + * able to see the whole of the data, so if data_size+262 takes us to the + * next windowBits size we need to fix up the value later. (Because even + * though deflate needs the extra window, inflate does not!) + */ + if (data_size <= 16384) + { + /* IMPLEMENTATION NOTE: this 'half_window_size' stuff is only here to + * work round a Microsoft Visual C misbehavior which, contrary to C-90, + * widens the result of the following shift to 64-bits if (and, + * apparently, only if) it is used in a test. + */ + unsigned int half_window_size = 1U << (windowBits-1); + + while (data_size + 262 <= half_window_size) + { + half_window_size >>= 1; + --windowBits; + } + } + + /* Check against the previous initialized values, if any. */ + if ((png_ptr->flags & PNG_FLAG_ZSTREAM_INITIALIZED) && + (png_ptr->zlib_set_level != level || + png_ptr->zlib_set_method != method || + png_ptr->zlib_set_window_bits != windowBits || + png_ptr->zlib_set_mem_level != memLevel || + png_ptr->zlib_set_strategy != strategy)) + { + if (deflateEnd(&png_ptr->zstream) != Z_OK) + png_warning(png_ptr, "deflateEnd failed (ignored)"); + + png_ptr->flags &= ~PNG_FLAG_ZSTREAM_INITIALIZED; + } + + /* For safety clear out the input and output pointers (currently zlib + * doesn't use them on Init, but it might in the future). + */ + png_ptr->zstream.next_in = NULL; + png_ptr->zstream.avail_in = 0; + png_ptr->zstream.next_out = NULL; + png_ptr->zstream.avail_out = 0; + + /* Now initialize if required, setting the new parameters, otherwise just + * to a simple reset to the previous parameters. + */ + if (png_ptr->flags & PNG_FLAG_ZSTREAM_INITIALIZED) + ret = deflateReset(&png_ptr->zstream); + + else + { + ret = deflateInit2(&png_ptr->zstream, level, method, windowBits, + memLevel, strategy); + + if (ret == Z_OK) + png_ptr->flags |= PNG_FLAG_ZSTREAM_INITIALIZED; + } + + /* The return code is from either deflateReset or deflateInit2; they have + * pretty much the same set of error codes. + */ + if (ret == Z_OK) + png_ptr->zowner = owner; + + else + png_zstream_error(png_ptr, ret); + + return ret; + } +} + +/* Clean up (or trim) a linked list of compression buffers. */ +void /* PRIVATE */ +png_free_buffer_list(png_structrp png_ptr, png_compression_bufferp *listp) +{ + png_compression_bufferp list = *listp; + + if (list != NULL) + { + *listp = NULL; + + do + { + png_compression_bufferp next = list->next; + + png_free(png_ptr, list); + list = next; + } + while (list != NULL); + } +} + +#ifdef PNG_WRITE_COMPRESSED_TEXT_SUPPORTED +/* This pair of functions encapsulates the operation of (a) compressing a + * text string, and (b) issuing it later as a series of chunk data writes. + * The compression_state structure is shared context for these functions + * set up by the caller to allow access to the relevant local variables. + * + * compression_buffer (new in 1.6.0) is just a linked list of zbuffer_size + * temporary buffers. From 1.6.0 it is retained in png_struct so that it will + * be correctly freed in the event of a write error (previous implementations + * just leaked memory.) + */ +typedef struct +{ + png_const_bytep input; /* The uncompressed input data */ + png_alloc_size_t input_len; /* Its length */ + png_uint_32 output_len; /* Final compressed length */ + png_byte output[1024]; /* First block of output */ +} compression_state; + +static void +png_text_compress_init(compression_state *comp, png_const_bytep input, + png_alloc_size_t input_len) +{ + comp->input = input; + comp->input_len = input_len; + comp->output_len = 0; +} + +/* Compress the data in the compression state input */ +static int +png_text_compress(png_structrp png_ptr, png_uint_32 chunk_name, + compression_state *comp, png_uint_32 prefix_len) +{ + int ret; + + /* To find the length of the output it is necessary to first compress the + * input, the result is buffered rather than using the two-pass algorithm + * that is used on the inflate side; deflate is assumed to be slower and a + * PNG writer is assumed to have more memory available than a PNG reader. + * + * IMPLEMENTATION NOTE: the zlib API deflateBound() can be used to find an + * upper limit on the output size, but it is always bigger than the input + * size so it is likely to be more efficient to use this linked-list + * approach. + */ + ret = png_deflate_claim(png_ptr, chunk_name, comp->input_len); + + if (ret != Z_OK) + return ret; + + /* Set up the compression buffers, we need a loop here to avoid overflowing a + * uInt. Use ZLIB_IO_MAX to limit the input. The output is always limited + * by the output buffer size, so there is no need to check that. Since this + * is ANSI-C we know that an 'int', hence a uInt, is always at least 16 bits + * in size. + */ + { + png_compression_bufferp *end = &png_ptr->zbuffer_list; + png_alloc_size_t input_len = comp->input_len; /* may be zero! */ + png_uint_32 output_len; + + /* zlib updates these for us: */ + png_ptr->zstream.next_in = PNGZ_INPUT_CAST(comp->input); + png_ptr->zstream.avail_in = 0; /* Set below */ + png_ptr->zstream.next_out = comp->output; + png_ptr->zstream.avail_out = (sizeof comp->output); + + output_len = png_ptr->zstream.avail_out; + + do + { + uInt avail_in = ZLIB_IO_MAX; + + if (avail_in > input_len) + avail_in = (uInt)input_len; + + input_len -= avail_in; + + png_ptr->zstream.avail_in = avail_in; + + if (png_ptr->zstream.avail_out == 0) + { + png_compression_buffer *next; + + /* Chunk data is limited to 2^31 bytes in length, so the prefix + * length must be counted here. + */ + if (output_len + prefix_len > PNG_UINT_31_MAX) + { + ret = Z_MEM_ERROR; + break; + } + + /* Need a new (malloc'ed) buffer, but there may be one present + * already. + */ + next = *end; + if (next == NULL) + { + next = png_voidcast(png_compression_bufferp, png_malloc_base + (png_ptr, PNG_COMPRESSION_BUFFER_SIZE(png_ptr))); + + if (next == NULL) + { + ret = Z_MEM_ERROR; + break; + } + + /* Link in this buffer (so that it will be freed later) */ + next->next = NULL; + *end = next; + } + + png_ptr->zstream.next_out = next->output; + png_ptr->zstream.avail_out = png_ptr->zbuffer_size; + output_len += png_ptr->zstream.avail_out; + + /* Move 'end' to the next buffer pointer. */ + end = &next->next; + } + + /* Compress the data */ + ret = deflate(&png_ptr->zstream, + input_len > 0 ? Z_NO_FLUSH : Z_FINISH); + + /* Claw back input data that was not consumed (because avail_in is + * reset above every time round the loop). + */ + input_len += png_ptr->zstream.avail_in; + png_ptr->zstream.avail_in = 0; /* safety */ + } + while (ret == Z_OK); + + /* There may be some space left in the last output buffer, this needs to + * be subtracted from output_len. + */ + output_len -= png_ptr->zstream.avail_out; + png_ptr->zstream.avail_out = 0; /* safety */ + comp->output_len = output_len; + + /* Now double check the output length, put in a custom message if it is + * too long. Otherwise ensure the z_stream::msg pointer is set to + * something. + */ + if (output_len + prefix_len >= PNG_UINT_31_MAX) + { + png_ptr->zstream.msg = PNGZ_MSG_CAST("compressed data too long"); + ret = Z_MEM_ERROR; + } + + else + png_zstream_error(png_ptr, ret); + + /* Reset zlib for another zTXt/iTXt or image data */ + png_ptr->zowner = 0; + + /* The only success case is Z_STREAM_END, input_len must be 0, if not this + * is an internal error. + */ + if (ret == Z_STREAM_END && input_len == 0) + { + /* Fix up the deflate header, if required */ + optimize_cmf(comp->output, comp->input_len); + + /* But Z_OK is returned, not Z_STREAM_END; this allows the claim + * function above to return Z_STREAM_END on an error (though it never + * does in the current versions of zlib.) + */ + return Z_OK; + } + + else + return ret; + } +} + +/* Ship the compressed text out via chunk writes */ +static void +png_write_compressed_data_out(png_structrp png_ptr, compression_state *comp) +{ + png_uint_32 output_len = comp->output_len; + png_const_bytep output = comp->output; + png_uint_32 avail = (sizeof comp->output); + png_compression_buffer *next = png_ptr->zbuffer_list; + + for (;;) + { + if (avail > output_len) + avail = output_len; + + png_write_chunk_data(png_ptr, output, avail); + + output_len -= avail; + + if (output_len == 0 || next == NULL) + break; + + avail = png_ptr->zbuffer_size; + output = next->output; + next = next->next; + } + + /* This is an internal error; 'next' must have been NULL! */ + if (output_len > 0) + png_error(png_ptr, "error writing ancillary chunked compressed data"); +} +#endif /* PNG_WRITE_COMPRESSED_TEXT_SUPPORTED */ + +#if defined(PNG_WRITE_TEXT_SUPPORTED) || defined(PNG_WRITE_pCAL_SUPPORTED) || \ + defined(PNG_WRITE_iCCP_SUPPORTED) || defined(PNG_WRITE_sPLT_SUPPORTED) +/* Check that the tEXt or zTXt keyword is valid per PNG 1.0 specification, + * and if invalid, correct the keyword rather than discarding the entire + * chunk. The PNG 1.0 specification requires keywords 1-79 characters in + * length, forbids leading or trailing whitespace, multiple internal spaces, + * and the non-break space (0x80) from ISO 8859-1. Returns keyword length. + * + * The 'new_key' buffer must be 80 characters in size (for the keyword plus a + * trailing '\0'). If this routine returns 0 then there was no keyword, or a + * valid one could not be generated, and the caller must png_error. + */ +static png_uint_32 +png_check_keyword(png_structrp png_ptr, png_const_charp key, png_bytep new_key) +{ + png_const_charp orig_key = key; + png_uint_32 key_len = 0; + int bad_character = 0; + int space = 1; + + png_debug(1, "in png_check_keyword"); + + if (key == NULL) + { + *new_key = 0; + return 0; + } + + while (*key && key_len < 79) + { + png_byte ch = (png_byte)(0xff & *key++); + + if ((ch > 32 && ch <= 126) || (ch >= 161 /*&& ch <= 255*/)) + *new_key++ = ch, ++key_len, space = 0; + + else if (!space) + { + /* A space or an invalid character when one wasn't seen immediately + * before; output just a space. + */ + *new_key++ = 32, ++key_len, space = 1; + + /* If the character was not a space then it is invalid. */ + if (ch != 32) + bad_character = ch; + } + + else if (!bad_character) + bad_character = ch; /* just skip it, record the first error */ + } + + if (key_len > 0 && space) /* trailing space */ + { + --key_len, --new_key; + if (!bad_character) + bad_character = 32; + } + + /* Terminate the keyword */ + *new_key = 0; + + if (key_len == 0) + return 0; + + /* Try to only output one warning per keyword: */ + if (*key) /* keyword too long */ + png_warning(png_ptr, "keyword truncated"); + + else if (bad_character) + { + PNG_WARNING_PARAMETERS(p) + + png_warning_parameter(p, 1, orig_key); + png_warning_parameter_signed(p, 2, PNG_NUMBER_FORMAT_02x, bad_character); + + png_formatted_warning(png_ptr, p, "keyword \"@1\": bad character '0x@2'"); + } + + return key_len; +} +#endif + +/* Write the IHDR chunk, and update the png_struct with the necessary + * information. Note that the rest of this code depends upon this + * information being correct. + */ +void /* PRIVATE */ +png_write_IHDR(png_structrp png_ptr, png_uint_32 width, png_uint_32 height, + int bit_depth, int color_type, int compression_type, int filter_type, + int interlace_type) +{ + png_byte buf[13]; /* Buffer to store the IHDR info */ + + png_debug(1, "in png_write_IHDR"); + + /* Check that we have valid input data from the application info */ + switch (color_type) + { + case PNG_COLOR_TYPE_GRAY: + switch (bit_depth) + { + case 1: + case 2: + case 4: + case 8: +#ifdef PNG_WRITE_16BIT_SUPPORTED + case 16: +#endif + png_ptr->channels = 1; break; + + default: + png_error(png_ptr, + "Invalid bit depth for grayscale image"); + } + break; + + case PNG_COLOR_TYPE_RGB: +#ifdef PNG_WRITE_16BIT_SUPPORTED + if (bit_depth != 8 && bit_depth != 16) +#else + if (bit_depth != 8) +#endif + png_error(png_ptr, "Invalid bit depth for RGB image"); + + png_ptr->channels = 3; + break; + + case PNG_COLOR_TYPE_PALETTE: + switch (bit_depth) + { + case 1: + case 2: + case 4: + case 8: + png_ptr->channels = 1; + break; + + default: + png_error(png_ptr, "Invalid bit depth for paletted image"); + } + break; + + case PNG_COLOR_TYPE_GRAY_ALPHA: + if (bit_depth != 8 && bit_depth != 16) + png_error(png_ptr, "Invalid bit depth for grayscale+alpha image"); + + png_ptr->channels = 2; + break; + + case PNG_COLOR_TYPE_RGB_ALPHA: +#ifdef PNG_WRITE_16BIT_SUPPORTED + if (bit_depth != 8 && bit_depth != 16) +#else + if (bit_depth != 8) +#endif + png_error(png_ptr, "Invalid bit depth for RGBA image"); + + png_ptr->channels = 4; + break; + + default: + png_error(png_ptr, "Invalid image color type specified"); + } + + if (compression_type != PNG_COMPRESSION_TYPE_BASE) + { + png_warning(png_ptr, "Invalid compression type specified"); + compression_type = PNG_COMPRESSION_TYPE_BASE; + } + + /* Write filter_method 64 (intrapixel differencing) only if + * 1. Libpng was compiled with PNG_MNG_FEATURES_SUPPORTED and + * 2. Libpng did not write a PNG signature (this filter_method is only + * used in PNG datastreams that are embedded in MNG datastreams) and + * 3. The application called png_permit_mng_features with a mask that + * included PNG_FLAG_MNG_FILTER_64 and + * 4. The filter_method is 64 and + * 5. The color_type is RGB or RGBA + */ + if ( +#ifdef PNG_MNG_FEATURES_SUPPORTED + !((png_ptr->mng_features_permitted & PNG_FLAG_MNG_FILTER_64) && + ((png_ptr->mode&PNG_HAVE_PNG_SIGNATURE) == 0) && + (color_type == PNG_COLOR_TYPE_RGB || + color_type == PNG_COLOR_TYPE_RGB_ALPHA) && + (filter_type == PNG_INTRAPIXEL_DIFFERENCING)) && +#endif + filter_type != PNG_FILTER_TYPE_BASE) + { + png_warning(png_ptr, "Invalid filter type specified"); + filter_type = PNG_FILTER_TYPE_BASE; + } + +#ifdef PNG_WRITE_INTERLACING_SUPPORTED + if (interlace_type != PNG_INTERLACE_NONE && + interlace_type != PNG_INTERLACE_ADAM7) + { + png_warning(png_ptr, "Invalid interlace type specified"); + interlace_type = PNG_INTERLACE_ADAM7; + } +#else + interlace_type=PNG_INTERLACE_NONE; +#endif + + /* Save the relevent information */ + png_ptr->bit_depth = (png_byte)bit_depth; + png_ptr->color_type = (png_byte)color_type; + png_ptr->interlaced = (png_byte)interlace_type; +#ifdef PNG_MNG_FEATURES_SUPPORTED + png_ptr->filter_type = (png_byte)filter_type; +#endif + png_ptr->compression_type = (png_byte)compression_type; + png_ptr->width = width; + png_ptr->height = height; + + png_ptr->pixel_depth = (png_byte)(bit_depth * png_ptr->channels); + png_ptr->rowbytes = PNG_ROWBYTES(png_ptr->pixel_depth, width); + /* Set the usr info, so any transformations can modify it */ + png_ptr->usr_width = png_ptr->width; + png_ptr->usr_bit_depth = png_ptr->bit_depth; + png_ptr->usr_channels = png_ptr->channels; + + /* Pack the header information into the buffer */ + png_save_uint_32(buf, width); + png_save_uint_32(buf + 4, height); + buf[8] = (png_byte)bit_depth; + buf[9] = (png_byte)color_type; + buf[10] = (png_byte)compression_type; + buf[11] = (png_byte)filter_type; + buf[12] = (png_byte)interlace_type; + + /* Write the chunk */ + png_write_complete_chunk(png_ptr, png_IHDR, buf, (png_size_t)13); + + if (!(png_ptr->do_filter)) + { + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE || + png_ptr->bit_depth < 8) + png_ptr->do_filter = PNG_FILTER_NONE; + + else + png_ptr->do_filter = PNG_ALL_FILTERS; + } + + png_ptr->mode = PNG_HAVE_IHDR; /* not READY_FOR_ZTXT */ +} + +/* Write the palette. We are careful not to trust png_color to be in the + * correct order for PNG, so people can redefine it to any convenient + * structure. + */ +void /* PRIVATE */ +png_write_PLTE(png_structrp png_ptr, png_const_colorp palette, + png_uint_32 num_pal) +{ + png_uint_32 i; + png_const_colorp pal_ptr; + png_byte buf[3]; + + png_debug(1, "in png_write_PLTE"); + + if (( +#ifdef PNG_MNG_FEATURES_SUPPORTED + !(png_ptr->mng_features_permitted & PNG_FLAG_MNG_EMPTY_PLTE) && +#endif + num_pal == 0) || num_pal > 256) + { + if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) + { + png_error(png_ptr, "Invalid number of colors in palette"); + } + + else + { + png_warning(png_ptr, "Invalid number of colors in palette"); + return; + } + } + + if (!(png_ptr->color_type&PNG_COLOR_MASK_COLOR)) + { + png_warning(png_ptr, + "Ignoring request to write a PLTE chunk in grayscale PNG"); + + return; + } + + png_ptr->num_palette = (png_uint_16)num_pal; + png_debug1(3, "num_palette = %d", png_ptr->num_palette); + + png_write_chunk_header(png_ptr, png_PLTE, (png_uint_32)(num_pal * 3)); +#ifdef PNG_POINTER_INDEXING_SUPPORTED + + for (i = 0, pal_ptr = palette; i < num_pal; i++, pal_ptr++) + { + buf[0] = pal_ptr->red; + buf[1] = pal_ptr->green; + buf[2] = pal_ptr->blue; + png_write_chunk_data(png_ptr, buf, (png_size_t)3); + } + +#else + /* This is a little slower but some buggy compilers need to do this + * instead + */ + pal_ptr=palette; + + for (i = 0; i < num_pal; i++) + { + buf[0] = pal_ptr[i].red; + buf[1] = pal_ptr[i].green; + buf[2] = pal_ptr[i].blue; + png_write_chunk_data(png_ptr, buf, (png_size_t)3); + } + +#endif + png_write_chunk_end(png_ptr); + png_ptr->mode |= PNG_HAVE_PLTE; +} + +/* This is similar to png_text_compress, above, except that it does not require + * all of the data at once and, instead of buffering the compressed result, + * writes it as IDAT chunks. Unlike png_text_compress it *can* png_error out + * because it calls the write interface. As a result it does its own error + * reporting and does not return an error code. In the event of error it will + * just call png_error. The input data length may exceed 32-bits. The 'flush' + * parameter is exactly the same as that to deflate, with the following + * meanings: + * + * Z_NO_FLUSH: normal incremental output of compressed data + * Z_SYNC_FLUSH: do a SYNC_FLUSH, used by png_write_flush + * Z_FINISH: this is the end of the input, do a Z_FINISH and clean up + * + * The routine manages the acquire and release of the png_ptr->zstream by + * checking and (at the end) clearing png_ptr->zowner, it does some sanity + * checks on the 'mode' flags while doing this. + */ +void /* PRIVATE */ +png_compress_IDAT(png_structrp png_ptr, png_const_bytep input, + png_alloc_size_t input_len, int flush) +{ + if (png_ptr->zowner != png_IDAT) + { + /* First time. Ensure we have a temporary buffer for compression and + * trim the buffer list if it has more than one entry to free memory. + * If 'WRITE_COMPRESSED_TEXT' is not set the list will never have been + * created at this point, but the check here is quick and safe. + */ + if (png_ptr->zbuffer_list == NULL) + { + png_ptr->zbuffer_list = png_voidcast(png_compression_bufferp, + png_malloc(png_ptr, PNG_COMPRESSION_BUFFER_SIZE(png_ptr))); + png_ptr->zbuffer_list->next = NULL; + } + + else + png_free_buffer_list(png_ptr, &png_ptr->zbuffer_list->next); + + /* It is a terminal error if we can't claim the zstream. */ + if (png_deflate_claim(png_ptr, png_IDAT, png_image_size(png_ptr)) != Z_OK) + png_error(png_ptr, png_ptr->zstream.msg); + + /* The output state is maintained in png_ptr->zstream, so it must be + * initialized here after the claim. + */ + png_ptr->zstream.next_out = png_ptr->zbuffer_list->output; + png_ptr->zstream.avail_out = png_ptr->zbuffer_size; + } + + /* Now loop reading and writing until all the input is consumed or an error + * terminates the operation. The _out values are maintained across calls to + * this function, but the input must be reset each time. + */ + png_ptr->zstream.next_in = PNGZ_INPUT_CAST(input); + png_ptr->zstream.avail_in = 0; /* set below */ + for (;;) + { + int ret; + + /* INPUT: from the row data */ + uInt avail = ZLIB_IO_MAX; + + if (avail > input_len) + avail = (uInt)input_len; /* safe because of the check */ + + png_ptr->zstream.avail_in = avail; + input_len -= avail; + + ret = deflate(&png_ptr->zstream, input_len > 0 ? Z_NO_FLUSH : flush); + + /* Include as-yet unconsumed input */ + input_len += png_ptr->zstream.avail_in; + png_ptr->zstream.avail_in = 0; + + /* OUTPUT: write complete IDAT chunks when avail_out drops to zero, note + * that these two zstream fields are preserved across the calls, therefore + * there is no need to set these up on entry to the loop. + */ + if (png_ptr->zstream.avail_out == 0) + { + png_bytep data = png_ptr->zbuffer_list->output; + uInt size = png_ptr->zbuffer_size; + + /* Write an IDAT containing the data then reset the buffer. The + * first IDAT may need deflate header optimization. + */ +# ifdef PNG_WRITE_OPTIMIZE_CMF_SUPPORTED + if (!(png_ptr->mode & PNG_HAVE_IDAT) && + png_ptr->compression_type == PNG_COMPRESSION_TYPE_BASE) + optimize_cmf(data, png_image_size(png_ptr)); +# endif + + png_write_complete_chunk(png_ptr, png_IDAT, data, size); + png_ptr->mode |= PNG_HAVE_IDAT; + + png_ptr->zstream.next_out = data; + png_ptr->zstream.avail_out = size; + + /* For SYNC_FLUSH or FINISH it is essential to keep calling zlib with + * the same flush parameter until it has finished output, for NO_FLUSH + * it doesn't matter. + */ + if (ret == Z_OK && flush != Z_NO_FLUSH) + continue; + } + + /* The order of these checks doesn't matter much; it just effect which + * possible error might be detected if multiple things go wrong at once. + */ + if (ret == Z_OK) /* most likely return code! */ + { + /* If all the input has been consumed then just return. If Z_FINISH + * was used as the flush parameter something has gone wrong if we get + * here. + */ + if (input_len == 0) + { + if (flush == Z_FINISH) + png_error(png_ptr, "Z_OK on Z_FINISH with output space"); + + return; + } + } + + else if (ret == Z_STREAM_END && flush == Z_FINISH) + { + /* This is the end of the IDAT data; any pending output must be + * flushed. For small PNG files we may still be at the beginning. + */ + png_bytep data = png_ptr->zbuffer_list->output; + uInt size = png_ptr->zbuffer_size - png_ptr->zstream.avail_out; + +# ifdef PNG_WRITE_OPTIMIZE_CMF_SUPPORTED + if (!(png_ptr->mode & PNG_HAVE_IDAT) && + png_ptr->compression_type == PNG_COMPRESSION_TYPE_BASE) + optimize_cmf(data, png_image_size(png_ptr)); +# endif + + png_write_complete_chunk(png_ptr, png_IDAT, data, size); + png_ptr->zstream.avail_out = 0; + png_ptr->zstream.next_out = NULL; + png_ptr->mode |= PNG_HAVE_IDAT | PNG_AFTER_IDAT; + + png_ptr->zowner = 0; /* Release the stream */ + return; + } + + else + { + /* This is an error condition. */ + png_zstream_error(png_ptr, ret); + png_error(png_ptr, png_ptr->zstream.msg); + } + } +} + +/* Write an IEND chunk */ +void /* PRIVATE */ +png_write_IEND(png_structrp png_ptr) +{ + png_debug(1, "in png_write_IEND"); + + png_write_complete_chunk(png_ptr, png_IEND, NULL, (png_size_t)0); + png_ptr->mode |= PNG_HAVE_IEND; +} + +#ifdef PNG_WRITE_gAMA_SUPPORTED +/* Write a gAMA chunk */ +void /* PRIVATE */ +png_write_gAMA_fixed(png_structrp png_ptr, png_fixed_point file_gamma) +{ + png_byte buf[4]; + + png_debug(1, "in png_write_gAMA"); + + /* file_gamma is saved in 1/100,000ths */ + png_save_uint_32(buf, (png_uint_32)file_gamma); + png_write_complete_chunk(png_ptr, png_gAMA, buf, (png_size_t)4); +} +#endif + +#ifdef PNG_WRITE_sRGB_SUPPORTED +/* Write a sRGB chunk */ +void /* PRIVATE */ +png_write_sRGB(png_structrp png_ptr, int srgb_intent) +{ + png_byte buf[1]; + + png_debug(1, "in png_write_sRGB"); + + if (srgb_intent >= PNG_sRGB_INTENT_LAST) + png_warning(png_ptr, + "Invalid sRGB rendering intent specified"); + + buf[0]=(png_byte)srgb_intent; + png_write_complete_chunk(png_ptr, png_sRGB, buf, (png_size_t)1); +} +#endif + +#ifdef PNG_WRITE_iCCP_SUPPORTED +/* Write an iCCP chunk */ +void /* PRIVATE */ +png_write_iCCP(png_structrp png_ptr, png_const_charp name, + png_const_bytep profile) +{ + png_uint_32 name_len; + png_uint_32 profile_len; + png_byte new_name[81]; /* 1 byte for the compression byte */ + compression_state comp; + + png_debug(1, "in png_write_iCCP"); + + /* These are all internal problems: the profile should have been checked + * before when it was stored. + */ + if (profile == NULL) + png_error(png_ptr, "No profile for iCCP chunk"); /* internal error */ + + profile_len = png_get_uint_32(profile); + + if (profile_len < 132) + png_error(png_ptr, "ICC profile too short"); + + if (profile_len & 0x03) + png_error(png_ptr, "ICC profile length invalid (not a multiple of 4)"); + + { + png_uint_32 embedded_profile_len = png_get_uint_32(profile); + + if (profile_len != embedded_profile_len) + png_error(png_ptr, "Profile length does not match profile"); + } + + name_len = png_check_keyword(png_ptr, name, new_name); + + if (name_len == 0) + png_error(png_ptr, "iCCP: invalid keyword"); + + new_name[++name_len] = PNG_COMPRESSION_TYPE_BASE; + + /* Make sure we include the NULL after the name and the compression type */ + ++name_len; + + png_text_compress_init(&comp, profile, profile_len); + + /* Allow for keyword terminator and compression byte */ + if (png_text_compress(png_ptr, png_iCCP, &comp, name_len) != Z_OK) + png_error(png_ptr, png_ptr->zstream.msg); + + png_write_chunk_header(png_ptr, png_iCCP, name_len + comp.output_len); + + png_write_chunk_data(png_ptr, new_name, name_len); + + png_write_compressed_data_out(png_ptr, &comp); + + png_write_chunk_end(png_ptr); +} +#endif + +#ifdef PNG_WRITE_sPLT_SUPPORTED +/* Write a sPLT chunk */ +void /* PRIVATE */ +png_write_sPLT(png_structrp png_ptr, png_const_sPLT_tp spalette) +{ + png_uint_32 name_len; + png_byte new_name[80]; + png_byte entrybuf[10]; + png_size_t entry_size = (spalette->depth == 8 ? 6 : 10); + png_size_t palette_size = entry_size * spalette->nentries; + png_sPLT_entryp ep; +#ifndef PNG_POINTER_INDEXING_SUPPORTED + int i; +#endif + + png_debug(1, "in png_write_sPLT"); + + name_len = png_check_keyword(png_ptr, spalette->name, new_name); + + if (name_len == 0) + png_error(png_ptr, "sPLT: invalid keyword"); + + /* Make sure we include the NULL after the name */ + png_write_chunk_header(png_ptr, png_sPLT, + (png_uint_32)(name_len + 2 + palette_size)); + + png_write_chunk_data(png_ptr, (png_bytep)new_name, + (png_size_t)(name_len + 1)); + + png_write_chunk_data(png_ptr, &spalette->depth, (png_size_t)1); + + /* Loop through each palette entry, writing appropriately */ +#ifdef PNG_POINTER_INDEXING_SUPPORTED + for (ep = spalette->entries; epentries + spalette->nentries; ep++) + { + if (spalette->depth == 8) + { + entrybuf[0] = (png_byte)ep->red; + entrybuf[1] = (png_byte)ep->green; + entrybuf[2] = (png_byte)ep->blue; + entrybuf[3] = (png_byte)ep->alpha; + png_save_uint_16(entrybuf + 4, ep->frequency); + } + + else + { + png_save_uint_16(entrybuf + 0, ep->red); + png_save_uint_16(entrybuf + 2, ep->green); + png_save_uint_16(entrybuf + 4, ep->blue); + png_save_uint_16(entrybuf + 6, ep->alpha); + png_save_uint_16(entrybuf + 8, ep->frequency); + } + + png_write_chunk_data(png_ptr, entrybuf, entry_size); + } +#else + ep=spalette->entries; + for (i = 0; i>spalette->nentries; i++) + { + if (spalette->depth == 8) + { + entrybuf[0] = (png_byte)ep[i].red; + entrybuf[1] = (png_byte)ep[i].green; + entrybuf[2] = (png_byte)ep[i].blue; + entrybuf[3] = (png_byte)ep[i].alpha; + png_save_uint_16(entrybuf + 4, ep[i].frequency); + } + + else + { + png_save_uint_16(entrybuf + 0, ep[i].red); + png_save_uint_16(entrybuf + 2, ep[i].green); + png_save_uint_16(entrybuf + 4, ep[i].blue); + png_save_uint_16(entrybuf + 6, ep[i].alpha); + png_save_uint_16(entrybuf + 8, ep[i].frequency); + } + + png_write_chunk_data(png_ptr, entrybuf, entry_size); + } +#endif + + png_write_chunk_end(png_ptr); +} +#endif + +#ifdef PNG_WRITE_sBIT_SUPPORTED +/* Write the sBIT chunk */ +void /* PRIVATE */ +png_write_sBIT(png_structrp png_ptr, png_const_color_8p sbit, int color_type) +{ + png_byte buf[4]; + png_size_t size; + + png_debug(1, "in png_write_sBIT"); + + /* Make sure we don't depend upon the order of PNG_COLOR_8 */ + if (color_type & PNG_COLOR_MASK_COLOR) + { + png_byte maxbits; + + maxbits = (png_byte)(color_type==PNG_COLOR_TYPE_PALETTE ? 8 : + png_ptr->usr_bit_depth); + + if (sbit->red == 0 || sbit->red > maxbits || + sbit->green == 0 || sbit->green > maxbits || + sbit->blue == 0 || sbit->blue > maxbits) + { + png_warning(png_ptr, "Invalid sBIT depth specified"); + return; + } + + buf[0] = sbit->red; + buf[1] = sbit->green; + buf[2] = sbit->blue; + size = 3; + } + + else + { + if (sbit->gray == 0 || sbit->gray > png_ptr->usr_bit_depth) + { + png_warning(png_ptr, "Invalid sBIT depth specified"); + return; + } + + buf[0] = sbit->gray; + size = 1; + } + + if (color_type & PNG_COLOR_MASK_ALPHA) + { + if (sbit->alpha == 0 || sbit->alpha > png_ptr->usr_bit_depth) + { + png_warning(png_ptr, "Invalid sBIT depth specified"); + return; + } + + buf[size++] = sbit->alpha; + } + + png_write_complete_chunk(png_ptr, png_sBIT, buf, size); +} +#endif + +#ifdef PNG_WRITE_cHRM_SUPPORTED +/* Write the cHRM chunk */ +void /* PRIVATE */ +png_write_cHRM_fixed(png_structrp png_ptr, const png_xy *xy) +{ + png_byte buf[32]; + + png_debug(1, "in png_write_cHRM"); + + /* Each value is saved in 1/100,000ths */ + png_save_int_32(buf, xy->whitex); + png_save_int_32(buf + 4, xy->whitey); + + png_save_int_32(buf + 8, xy->redx); + png_save_int_32(buf + 12, xy->redy); + + png_save_int_32(buf + 16, xy->greenx); + png_save_int_32(buf + 20, xy->greeny); + + png_save_int_32(buf + 24, xy->bluex); + png_save_int_32(buf + 28, xy->bluey); + + png_write_complete_chunk(png_ptr, png_cHRM, buf, 32); +} +#endif + +#ifdef PNG_WRITE_tRNS_SUPPORTED +/* Write the tRNS chunk */ +void /* PRIVATE */ +png_write_tRNS(png_structrp png_ptr, png_const_bytep trans_alpha, + png_const_color_16p tran, int num_trans, int color_type) +{ + png_byte buf[6]; + + png_debug(1, "in png_write_tRNS"); + + if (color_type == PNG_COLOR_TYPE_PALETTE) + { + if (num_trans <= 0 || num_trans > (int)png_ptr->num_palette) + { + png_app_warning(png_ptr, + "Invalid number of transparent colors specified"); + return; + } + + /* Write the chunk out as it is */ + png_write_complete_chunk(png_ptr, png_tRNS, trans_alpha, + (png_size_t)num_trans); + } + + else if (color_type == PNG_COLOR_TYPE_GRAY) + { + /* One 16 bit value */ + if (tran->gray >= (1 << png_ptr->bit_depth)) + { + png_app_warning(png_ptr, + "Ignoring attempt to write tRNS chunk out-of-range for bit_depth"); + + return; + } + + png_save_uint_16(buf, tran->gray); + png_write_complete_chunk(png_ptr, png_tRNS, buf, (png_size_t)2); + } + + else if (color_type == PNG_COLOR_TYPE_RGB) + { + /* Three 16 bit values */ + png_save_uint_16(buf, tran->red); + png_save_uint_16(buf + 2, tran->green); + png_save_uint_16(buf + 4, tran->blue); +#ifdef PNG_WRITE_16BIT_SUPPORTED + if (png_ptr->bit_depth == 8 && (buf[0] | buf[2] | buf[4])) +#else + if (buf[0] | buf[2] | buf[4]) +#endif + { + png_app_warning(png_ptr, + "Ignoring attempt to write 16-bit tRNS chunk when bit_depth is 8"); + return; + } + + png_write_complete_chunk(png_ptr, png_tRNS, buf, (png_size_t)6); + } + + else + { + png_app_warning(png_ptr, "Can't write tRNS with an alpha channel"); + } +} +#endif + +#ifdef PNG_WRITE_bKGD_SUPPORTED +/* Write the background chunk */ +void /* PRIVATE */ +png_write_bKGD(png_structrp png_ptr, png_const_color_16p back, int color_type) +{ + png_byte buf[6]; + + png_debug(1, "in png_write_bKGD"); + + if (color_type == PNG_COLOR_TYPE_PALETTE) + { + if ( +#ifdef PNG_MNG_FEATURES_SUPPORTED + (png_ptr->num_palette || + (!(png_ptr->mng_features_permitted & PNG_FLAG_MNG_EMPTY_PLTE))) && +#endif + back->index >= png_ptr->num_palette) + { + png_warning(png_ptr, "Invalid background palette index"); + return; + } + + buf[0] = back->index; + png_write_complete_chunk(png_ptr, png_bKGD, buf, (png_size_t)1); + } + + else if (color_type & PNG_COLOR_MASK_COLOR) + { + png_save_uint_16(buf, back->red); + png_save_uint_16(buf + 2, back->green); + png_save_uint_16(buf + 4, back->blue); +#ifdef PNG_WRITE_16BIT_SUPPORTED + if (png_ptr->bit_depth == 8 && (buf[0] | buf[2] | buf[4])) +#else + if (buf[0] | buf[2] | buf[4]) +#endif + { + png_warning(png_ptr, + "Ignoring attempt to write 16-bit bKGD chunk when bit_depth is 8"); + + return; + } + + png_write_complete_chunk(png_ptr, png_bKGD, buf, (png_size_t)6); + } + + else + { + if (back->gray >= (1 << png_ptr->bit_depth)) + { + png_warning(png_ptr, + "Ignoring attempt to write bKGD chunk out-of-range for bit_depth"); + + return; + } + + png_save_uint_16(buf, back->gray); + png_write_complete_chunk(png_ptr, png_bKGD, buf, (png_size_t)2); + } +} +#endif + +#ifdef PNG_WRITE_hIST_SUPPORTED +/* Write the histogram */ +void /* PRIVATE */ +png_write_hIST(png_structrp png_ptr, png_const_uint_16p hist, int num_hist) +{ + int i; + png_byte buf[3]; + + png_debug(1, "in png_write_hIST"); + + if (num_hist > (int)png_ptr->num_palette) + { + png_debug2(3, "num_hist = %d, num_palette = %d", num_hist, + png_ptr->num_palette); + + png_warning(png_ptr, "Invalid number of histogram entries specified"); + return; + } + + png_write_chunk_header(png_ptr, png_hIST, (png_uint_32)(num_hist * 2)); + + for (i = 0; i < num_hist; i++) + { + png_save_uint_16(buf, hist[i]); + png_write_chunk_data(png_ptr, buf, (png_size_t)2); + } + + png_write_chunk_end(png_ptr); +} +#endif + +#ifdef PNG_WRITE_tEXt_SUPPORTED +/* Write a tEXt chunk */ +void /* PRIVATE */ +png_write_tEXt(png_structrp png_ptr, png_const_charp key, png_const_charp text, + png_size_t text_len) +{ + png_uint_32 key_len; + png_byte new_key[80]; + + png_debug(1, "in png_write_tEXt"); + + key_len = png_check_keyword(png_ptr, key, new_key); + + if (key_len == 0) + png_error(png_ptr, "tEXt: invalid keyword"); + + if (text == NULL || *text == '\0') + text_len = 0; + + else + text_len = strlen(text); + + if (text_len > PNG_UINT_31_MAX - (key_len+1)) + png_error(png_ptr, "tEXt: text too long"); + + /* Make sure we include the 0 after the key */ + png_write_chunk_header(png_ptr, png_tEXt, + (png_uint_32)/*checked above*/(key_len + text_len + 1)); + /* + * We leave it to the application to meet PNG-1.0 requirements on the + * contents of the text. PNG-1.0 through PNG-1.2 discourage the use of + * any non-Latin-1 characters except for NEWLINE. ISO PNG will forbid them. + * The NUL character is forbidden by PNG-1.0 through PNG-1.2 and ISO PNG. + */ + png_write_chunk_data(png_ptr, new_key, key_len + 1); + + if (text_len) + png_write_chunk_data(png_ptr, (png_const_bytep)text, text_len); + + png_write_chunk_end(png_ptr); +} +#endif + +#ifdef PNG_WRITE_zTXt_SUPPORTED +/* Write a compressed text chunk */ +void /* PRIVATE */ +png_write_zTXt(png_structrp png_ptr, png_const_charp key, png_const_charp text, + png_size_t text_len, int compression) +{ + png_uint_32 key_len; + png_byte new_key[81]; + compression_state comp; + + png_debug(1, "in png_write_zTXt"); + PNG_UNUSED(text_len) /* Always use strlen */ + + if (compression == PNG_TEXT_COMPRESSION_NONE) + { + png_write_tEXt(png_ptr, key, text, 0); + return; + } + + if (compression != PNG_TEXT_COMPRESSION_zTXt) + png_error(png_ptr, "zTXt: invalid compression type"); + + key_len = png_check_keyword(png_ptr, key, new_key); + + if (key_len == 0) + png_error(png_ptr, "zTXt: invalid keyword"); + + /* Add the compression method and 1 for the keyword separator. */ + new_key[++key_len] = PNG_COMPRESSION_TYPE_BASE; + ++key_len; + + /* Compute the compressed data; do it now for the length */ + png_text_compress_init(&comp, (png_const_bytep)text, + text == NULL ? 0 : strlen(text)); + + if (png_text_compress(png_ptr, png_zTXt, &comp, key_len) != Z_OK) + png_error(png_ptr, png_ptr->zstream.msg); + + /* Write start of chunk */ + png_write_chunk_header(png_ptr, png_zTXt, key_len + comp.output_len); + + /* Write key */ + png_write_chunk_data(png_ptr, new_key, key_len); + + /* Write the compressed data */ + png_write_compressed_data_out(png_ptr, &comp); + + /* Close the chunk */ + png_write_chunk_end(png_ptr); +} +#endif + +#ifdef PNG_WRITE_iTXt_SUPPORTED +/* Write an iTXt chunk */ +void /* PRIVATE */ +png_write_iTXt(png_structrp png_ptr, int compression, png_const_charp key, + png_const_charp lang, png_const_charp lang_key, png_const_charp text) +{ + png_uint_32 key_len, prefix_len; + png_size_t lang_len, lang_key_len; + png_byte new_key[82]; + compression_state comp; + + png_debug(1, "in png_write_iTXt"); + + key_len = png_check_keyword(png_ptr, key, new_key); + + if (key_len == 0) + png_error(png_ptr, "iTXt: invalid keyword"); + + /* Set the compression flag */ + switch (compression) + { + case PNG_ITXT_COMPRESSION_NONE: + case PNG_TEXT_COMPRESSION_NONE: + compression = new_key[++key_len] = 0; /* no compression */ + break; + + case PNG_TEXT_COMPRESSION_zTXt: + case PNG_ITXT_COMPRESSION_zTXt: + compression = new_key[++key_len] = 1; /* compressed */ + break; + + default: + png_error(png_ptr, "iTXt: invalid compression"); + } + + new_key[++key_len] = PNG_COMPRESSION_TYPE_BASE; + ++key_len; /* for the keywod separator */ + + /* We leave it to the application to meet PNG-1.0 requirements on the + * contents of the text. PNG-1.0 through PNG-1.2 discourage the use of + * any non-Latin-1 characters except for NEWLINE. ISO PNG, however, + * specifies that the text is UTF-8 and this really doesn't require any + * checking. + * + * The NUL character is forbidden by PNG-1.0 through PNG-1.2 and ISO PNG. + * + * TODO: validate the language tag correctly (see the spec.) + */ + if (lang == NULL) lang = ""; /* empty language is valid */ + lang_len = strlen(lang)+1; + if (lang_key == NULL) lang_key = ""; /* may be empty */ + lang_key_len = strlen(lang_key)+1; + if (text == NULL) text = ""; /* may be empty */ + + prefix_len = key_len; + if (lang_len > PNG_UINT_31_MAX-prefix_len) + prefix_len = PNG_UINT_31_MAX; + else + prefix_len = (png_uint_32)(prefix_len + lang_len); + + if (lang_key_len > PNG_UINT_31_MAX-prefix_len) + prefix_len = PNG_UINT_31_MAX; + else + prefix_len = (png_uint_32)(prefix_len + lang_key_len); + + png_text_compress_init(&comp, (png_const_bytep)text, strlen(text)); + + if (compression) + { + if (png_text_compress(png_ptr, png_iTXt, &comp, prefix_len) != Z_OK) + png_error(png_ptr, png_ptr->zstream.msg); + } + + else + { + if (comp.input_len > PNG_UINT_31_MAX-prefix_len) + png_error(png_ptr, "iTXt: uncompressed text too long"); + + /* So the string will fit in a chunk: */ + comp.output_len = (png_uint_32)/*SAFE*/comp.input_len; + } + + png_write_chunk_header(png_ptr, png_iTXt, comp.output_len + prefix_len); + + png_write_chunk_data(png_ptr, new_key, key_len); + + png_write_chunk_data(png_ptr, (png_const_bytep)lang, lang_len); + + png_write_chunk_data(png_ptr, (png_const_bytep)lang_key, lang_key_len); + + if (compression) + png_write_compressed_data_out(png_ptr, &comp); + + else + png_write_chunk_data(png_ptr, (png_const_bytep)text, comp.input_len); + + png_write_chunk_end(png_ptr); +} +#endif + +#ifdef PNG_WRITE_oFFs_SUPPORTED +/* Write the oFFs chunk */ +void /* PRIVATE */ +png_write_oFFs(png_structrp png_ptr, png_int_32 x_offset, png_int_32 y_offset, + int unit_type) +{ + png_byte buf[9]; + + png_debug(1, "in png_write_oFFs"); + + if (unit_type >= PNG_OFFSET_LAST) + png_warning(png_ptr, "Unrecognized unit type for oFFs chunk"); + + png_save_int_32(buf, x_offset); + png_save_int_32(buf + 4, y_offset); + buf[8] = (png_byte)unit_type; + + png_write_complete_chunk(png_ptr, png_oFFs, buf, (png_size_t)9); +} +#endif +#ifdef PNG_WRITE_pCAL_SUPPORTED +/* Write the pCAL chunk (described in the PNG extensions document) */ +void /* PRIVATE */ +png_write_pCAL(png_structrp png_ptr, png_charp purpose, png_int_32 X0, + png_int_32 X1, int type, int nparams, png_const_charp units, + png_charpp params) +{ + png_uint_32 purpose_len; + png_size_t units_len, total_len; + png_size_tp params_len; + png_byte buf[10]; + png_byte new_purpose[80]; + int i; + + png_debug1(1, "in png_write_pCAL (%d parameters)", nparams); + + if (type >= PNG_EQUATION_LAST) + png_error(png_ptr, "Unrecognized equation type for pCAL chunk"); + + purpose_len = png_check_keyword(png_ptr, purpose, new_purpose); + + if (purpose_len == 0) + png_error(png_ptr, "pCAL: invalid keyword"); + + ++purpose_len; /* terminator */ + + png_debug1(3, "pCAL purpose length = %d", (int)purpose_len); + units_len = strlen(units) + (nparams == 0 ? 0 : 1); + png_debug1(3, "pCAL units length = %d", (int)units_len); + total_len = purpose_len + units_len + 10; + + params_len = (png_size_tp)png_malloc(png_ptr, + (png_alloc_size_t)(nparams * (sizeof (png_size_t)))); + + /* Find the length of each parameter, making sure we don't count the + * null terminator for the last parameter. + */ + for (i = 0; i < nparams; i++) + { + params_len[i] = strlen(params[i]) + (i == nparams - 1 ? 0 : 1); + png_debug2(3, "pCAL parameter %d length = %lu", i, + (unsigned long)params_len[i]); + total_len += params_len[i]; + } + + png_debug1(3, "pCAL total length = %d", (int)total_len); + png_write_chunk_header(png_ptr, png_pCAL, (png_uint_32)total_len); + png_write_chunk_data(png_ptr, new_purpose, purpose_len); + png_save_int_32(buf, X0); + png_save_int_32(buf + 4, X1); + buf[8] = (png_byte)type; + buf[9] = (png_byte)nparams; + png_write_chunk_data(png_ptr, buf, (png_size_t)10); + png_write_chunk_data(png_ptr, (png_const_bytep)units, (png_size_t)units_len); + + for (i = 0; i < nparams; i++) + { + png_write_chunk_data(png_ptr, (png_const_bytep)params[i], params_len[i]); + } + + png_free(png_ptr, params_len); + png_write_chunk_end(png_ptr); +} +#endif + +#ifdef PNG_WRITE_sCAL_SUPPORTED +/* Write the sCAL chunk */ +void /* PRIVATE */ +png_write_sCAL_s(png_structrp png_ptr, int unit, png_const_charp width, + png_const_charp height) +{ + png_byte buf[64]; + png_size_t wlen, hlen, total_len; + + png_debug(1, "in png_write_sCAL_s"); + + wlen = strlen(width); + hlen = strlen(height); + total_len = wlen + hlen + 2; + + if (total_len > 64) + { + png_warning(png_ptr, "Can't write sCAL (buffer too small)"); + return; + } + + buf[0] = (png_byte)unit; + memcpy(buf + 1, width, wlen + 1); /* Append the '\0' here */ + memcpy(buf + wlen + 2, height, hlen); /* Do NOT append the '\0' here */ + + png_debug1(3, "sCAL total length = %u", (unsigned int)total_len); + png_write_complete_chunk(png_ptr, png_sCAL, buf, total_len); +} +#endif + +#ifdef PNG_WRITE_pHYs_SUPPORTED +/* Write the pHYs chunk */ +void /* PRIVATE */ +png_write_pHYs(png_structrp png_ptr, png_uint_32 x_pixels_per_unit, + png_uint_32 y_pixels_per_unit, + int unit_type) +{ + png_byte buf[9]; + + png_debug(1, "in png_write_pHYs"); + + if (unit_type >= PNG_RESOLUTION_LAST) + png_warning(png_ptr, "Unrecognized unit type for pHYs chunk"); + + png_save_uint_32(buf, x_pixels_per_unit); + png_save_uint_32(buf + 4, y_pixels_per_unit); + buf[8] = (png_byte)unit_type; + + png_write_complete_chunk(png_ptr, png_pHYs, buf, (png_size_t)9); +} +#endif + +#ifdef PNG_WRITE_tIME_SUPPORTED +/* Write the tIME chunk. Use either png_convert_from_struct_tm() + * or png_convert_from_time_t(), or fill in the structure yourself. + */ +void /* PRIVATE */ +png_write_tIME(png_structrp png_ptr, png_const_timep mod_time) +{ + png_byte buf[7]; + + png_debug(1, "in png_write_tIME"); + + if (mod_time->month > 12 || mod_time->month < 1 || + mod_time->day > 31 || mod_time->day < 1 || + mod_time->hour > 23 || mod_time->second > 60) + { + png_warning(png_ptr, "Invalid time specified for tIME chunk"); + return; + } + + png_save_uint_16(buf, mod_time->year); + buf[2] = mod_time->month; + buf[3] = mod_time->day; + buf[4] = mod_time->hour; + buf[5] = mod_time->minute; + buf[6] = mod_time->second; + + png_write_complete_chunk(png_ptr, png_tIME, buf, (png_size_t)7); +} +#endif + +/* Initializes the row writing capability of libpng */ +void /* PRIVATE */ +png_write_start_row(png_structrp png_ptr) +{ +#ifdef PNG_WRITE_INTERLACING_SUPPORTED + /* Arrays to facilitate easy interlacing - use pass (0 - 6) as index */ + + /* Start of interlace block */ + static PNG_CONST png_byte png_pass_start[7] = {0, 4, 0, 2, 0, 1, 0}; + + /* Offset to next interlace block */ + static PNG_CONST png_byte png_pass_inc[7] = {8, 8, 4, 4, 2, 2, 1}; + + /* Start of interlace block in the y direction */ + static PNG_CONST png_byte png_pass_ystart[7] = {0, 0, 4, 0, 2, 0, 1}; + + /* Offset to next interlace block in the y direction */ + static PNG_CONST png_byte png_pass_yinc[7] = {8, 8, 8, 4, 4, 2, 2}; +#endif + + png_alloc_size_t buf_size; + int usr_pixel_depth; + + png_debug(1, "in png_write_start_row"); + + usr_pixel_depth = png_ptr->usr_channels * png_ptr->usr_bit_depth; + buf_size = PNG_ROWBYTES(usr_pixel_depth, png_ptr->width) + 1; + + /* 1.5.6: added to allow checking in the row write code. */ + png_ptr->transformed_pixel_depth = png_ptr->pixel_depth; + png_ptr->maximum_pixel_depth = (png_byte)usr_pixel_depth; + + /* Set up row buffer */ + png_ptr->row_buf = (png_bytep)png_malloc(png_ptr, buf_size); + + png_ptr->row_buf[0] = PNG_FILTER_VALUE_NONE; + +#ifdef PNG_WRITE_FILTER_SUPPORTED + /* Set up filtering buffer, if using this filter */ + if (png_ptr->do_filter & PNG_FILTER_SUB) + { + png_ptr->sub_row = (png_bytep)png_malloc(png_ptr, png_ptr->rowbytes + 1); + + png_ptr->sub_row[0] = PNG_FILTER_VALUE_SUB; + } + + /* We only need to keep the previous row if we are using one of these. */ + if (png_ptr->do_filter & (PNG_FILTER_AVG | PNG_FILTER_UP | PNG_FILTER_PAETH)) + { + /* Set up previous row buffer */ + png_ptr->prev_row = (png_bytep)png_calloc(png_ptr, buf_size); + + if (png_ptr->do_filter & PNG_FILTER_UP) + { + png_ptr->up_row = (png_bytep)png_malloc(png_ptr, + png_ptr->rowbytes + 1); + + png_ptr->up_row[0] = PNG_FILTER_VALUE_UP; + } + + if (png_ptr->do_filter & PNG_FILTER_AVG) + { + png_ptr->avg_row = (png_bytep)png_malloc(png_ptr, + png_ptr->rowbytes + 1); + + png_ptr->avg_row[0] = PNG_FILTER_VALUE_AVG; + } + + if (png_ptr->do_filter & PNG_FILTER_PAETH) + { + png_ptr->paeth_row = (png_bytep)png_malloc(png_ptr, + png_ptr->rowbytes + 1); + + png_ptr->paeth_row[0] = PNG_FILTER_VALUE_PAETH; + } + } +#endif /* PNG_WRITE_FILTER_SUPPORTED */ + +#ifdef PNG_WRITE_INTERLACING_SUPPORTED + /* If interlaced, we need to set up width and height of pass */ + if (png_ptr->interlaced) + { + if (!(png_ptr->transformations & PNG_INTERLACE)) + { + png_ptr->num_rows = (png_ptr->height + png_pass_yinc[0] - 1 - + png_pass_ystart[0]) / png_pass_yinc[0]; + + png_ptr->usr_width = (png_ptr->width + png_pass_inc[0] - 1 - + png_pass_start[0]) / png_pass_inc[0]; + } + + else + { + png_ptr->num_rows = png_ptr->height; + png_ptr->usr_width = png_ptr->width; + } + } + + else +#endif + { + png_ptr->num_rows = png_ptr->height; + png_ptr->usr_width = png_ptr->width; + } +} + +/* Internal use only. Called when finished processing a row of data. */ +void /* PRIVATE */ +png_write_finish_row(png_structrp png_ptr) +{ +#ifdef PNG_WRITE_INTERLACING_SUPPORTED + /* Arrays to facilitate easy interlacing - use pass (0 - 6) as index */ + + /* Start of interlace block */ + static PNG_CONST png_byte png_pass_start[7] = {0, 4, 0, 2, 0, 1, 0}; + + /* Offset to next interlace block */ + static PNG_CONST png_byte png_pass_inc[7] = {8, 8, 4, 4, 2, 2, 1}; + + /* Start of interlace block in the y direction */ + static PNG_CONST png_byte png_pass_ystart[7] = {0, 0, 4, 0, 2, 0, 1}; + + /* Offset to next interlace block in the y direction */ + static PNG_CONST png_byte png_pass_yinc[7] = {8, 8, 8, 4, 4, 2, 2}; +#endif + + png_debug(1, "in png_write_finish_row"); + + /* Next row */ + png_ptr->row_number++; + + /* See if we are done */ + if (png_ptr->row_number < png_ptr->num_rows) + return; + +#ifdef PNG_WRITE_INTERLACING_SUPPORTED + /* If interlaced, go to next pass */ + if (png_ptr->interlaced) + { + png_ptr->row_number = 0; + if (png_ptr->transformations & PNG_INTERLACE) + { + png_ptr->pass++; + } + + else + { + /* Loop until we find a non-zero width or height pass */ + do + { + png_ptr->pass++; + + if (png_ptr->pass >= 7) + break; + + png_ptr->usr_width = (png_ptr->width + + png_pass_inc[png_ptr->pass] - 1 - + png_pass_start[png_ptr->pass]) / + png_pass_inc[png_ptr->pass]; + + png_ptr->num_rows = (png_ptr->height + + png_pass_yinc[png_ptr->pass] - 1 - + png_pass_ystart[png_ptr->pass]) / + png_pass_yinc[png_ptr->pass]; + + if (png_ptr->transformations & PNG_INTERLACE) + break; + + } while (png_ptr->usr_width == 0 || png_ptr->num_rows == 0); + + } + + /* Reset the row above the image for the next pass */ + if (png_ptr->pass < 7) + { + if (png_ptr->prev_row != NULL) + memset(png_ptr->prev_row, 0, + (png_size_t)(PNG_ROWBYTES(png_ptr->usr_channels* + png_ptr->usr_bit_depth, png_ptr->width)) + 1); + + return; + } + } +#endif + + /* If we get here, we've just written the last row, so we need + to flush the compressor */ + png_compress_IDAT(png_ptr, NULL, 0, Z_FINISH); +} + +#ifdef PNG_WRITE_INTERLACING_SUPPORTED +/* Pick out the correct pixels for the interlace pass. + * The basic idea here is to go through the row with a source + * pointer and a destination pointer (sp and dp), and copy the + * correct pixels for the pass. As the row gets compacted, + * sp will always be >= dp, so we should never overwrite anything. + * See the default: case for the easiest code to understand. + */ +void /* PRIVATE */ +png_do_write_interlace(png_row_infop row_info, png_bytep row, int pass) +{ + /* Arrays to facilitate easy interlacing - use pass (0 - 6) as index */ + + /* Start of interlace block */ + static PNG_CONST png_byte png_pass_start[7] = {0, 4, 0, 2, 0, 1, 0}; + + /* Offset to next interlace block */ + static PNG_CONST png_byte png_pass_inc[7] = {8, 8, 4, 4, 2, 2, 1}; + + png_debug(1, "in png_do_write_interlace"); + + /* We don't have to do anything on the last pass (6) */ + if (pass < 6) + { + /* Each pixel depth is handled separately */ + switch (row_info->pixel_depth) + { + case 1: + { + png_bytep sp; + png_bytep dp; + int shift; + int d; + int value; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + dp = row; + d = 0; + shift = 7; + + for (i = png_pass_start[pass]; i < row_width; + i += png_pass_inc[pass]) + { + sp = row + (png_size_t)(i >> 3); + value = (int)(*sp >> (7 - (int)(i & 0x07))) & 0x01; + d |= (value << shift); + + if (shift == 0) + { + shift = 7; + *dp++ = (png_byte)d; + d = 0; + } + + else + shift--; + + } + if (shift != 7) + *dp = (png_byte)d; + + break; + } + + case 2: + { + png_bytep sp; + png_bytep dp; + int shift; + int d; + int value; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + dp = row; + shift = 6; + d = 0; + + for (i = png_pass_start[pass]; i < row_width; + i += png_pass_inc[pass]) + { + sp = row + (png_size_t)(i >> 2); + value = (*sp >> ((3 - (int)(i & 0x03)) << 1)) & 0x03; + d |= (value << shift); + + if (shift == 0) + { + shift = 6; + *dp++ = (png_byte)d; + d = 0; + } + + else + shift -= 2; + } + if (shift != 6) + *dp = (png_byte)d; + + break; + } + + case 4: + { + png_bytep sp; + png_bytep dp; + int shift; + int d; + int value; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + + dp = row; + shift = 4; + d = 0; + for (i = png_pass_start[pass]; i < row_width; + i += png_pass_inc[pass]) + { + sp = row + (png_size_t)(i >> 1); + value = (*sp >> ((1 - (int)(i & 0x01)) << 2)) & 0x0f; + d |= (value << shift); + + if (shift == 0) + { + shift = 4; + *dp++ = (png_byte)d; + d = 0; + } + + else + shift -= 4; + } + if (shift != 4) + *dp = (png_byte)d; + + break; + } + + default: + { + png_bytep sp; + png_bytep dp; + png_uint_32 i; + png_uint_32 row_width = row_info->width; + png_size_t pixel_bytes; + + /* Start at the beginning */ + dp = row; + + /* Find out how many bytes each pixel takes up */ + pixel_bytes = (row_info->pixel_depth >> 3); + + /* Loop through the row, only looking at the pixels that matter */ + for (i = png_pass_start[pass]; i < row_width; + i += png_pass_inc[pass]) + { + /* Find out where the original pixel is */ + sp = row + (png_size_t)i * pixel_bytes; + + /* Move the pixel */ + if (dp != sp) + memcpy(dp, sp, pixel_bytes); + + /* Next pixel */ + dp += pixel_bytes; + } + break; + } + } + /* Set new row width */ + row_info->width = (row_info->width + + png_pass_inc[pass] - 1 - + png_pass_start[pass]) / + png_pass_inc[pass]; + + row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, + row_info->width); + } +} +#endif + +/* This filters the row, chooses which filter to use, if it has not already + * been specified by the application, and then writes the row out with the + * chosen filter. + */ +static void png_write_filtered_row(png_structrp png_ptr, png_bytep filtered_row, + png_size_t row_bytes); + +#define PNG_MAXSUM (((png_uint_32)(-1)) >> 1) +#define PNG_HISHIFT 10 +#define PNG_LOMASK ((png_uint_32)0xffffL) +#define PNG_HIMASK ((png_uint_32)(~PNG_LOMASK >> PNG_HISHIFT)) +void /* PRIVATE */ +png_write_find_filter(png_structrp png_ptr, png_row_infop row_info) +{ + png_bytep best_row; +#ifdef PNG_WRITE_FILTER_SUPPORTED + png_bytep prev_row, row_buf; + png_uint_32 mins, bpp; + png_byte filter_to_do = png_ptr->do_filter; + png_size_t row_bytes = row_info->rowbytes; +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + int num_p_filters = png_ptr->num_prev_filters; +#endif + + png_debug(1, "in png_write_find_filter"); + +#ifndef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + if (png_ptr->row_number == 0 && filter_to_do == PNG_ALL_FILTERS) + { + /* These will never be selected so we need not test them. */ + filter_to_do &= ~(PNG_FILTER_UP | PNG_FILTER_PAETH); + } +#endif + + /* Find out how many bytes offset each pixel is */ + bpp = (row_info->pixel_depth + 7) >> 3; + + prev_row = png_ptr->prev_row; +#endif + best_row = png_ptr->row_buf; +#ifdef PNG_WRITE_FILTER_SUPPORTED + row_buf = best_row; + mins = PNG_MAXSUM; + + /* The prediction method we use is to find which method provides the + * smallest value when summing the absolute values of the distances + * from zero, using anything >= 128 as negative numbers. This is known + * as the "minimum sum of absolute differences" heuristic. Other + * heuristics are the "weighted minimum sum of absolute differences" + * (experimental and can in theory improve compression), and the "zlib + * predictive" method (not implemented yet), which does test compressions + * of lines using different filter methods, and then chooses the + * (series of) filter(s) that give minimum compressed data size (VERY + * computationally expensive). + * + * GRR 980525: consider also + * + * (1) minimum sum of absolute differences from running average (i.e., + * keep running sum of non-absolute differences & count of bytes) + * [track dispersion, too? restart average if dispersion too large?] + * + * (1b) minimum sum of absolute differences from sliding average, probably + * with window size <= deflate window (usually 32K) + * + * (2) minimum sum of squared differences from zero or running average + * (i.e., ~ root-mean-square approach) + */ + + + /* We don't need to test the 'no filter' case if this is the only filter + * that has been chosen, as it doesn't actually do anything to the data. + */ + if ((filter_to_do & PNG_FILTER_NONE) && filter_to_do != PNG_FILTER_NONE) + { + png_bytep rp; + png_uint_32 sum = 0; + png_size_t i; + int v; + + for (i = 0, rp = row_buf + 1; i < row_bytes; i++, rp++) + { + v = *rp; + sum += (v < 128) ? v : 256 - v; + } + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + if (png_ptr->heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + png_uint_32 sumhi, sumlo; + int j; + sumlo = sum & PNG_LOMASK; + sumhi = (sum >> PNG_HISHIFT) & PNG_HIMASK; /* Gives us some footroom */ + + /* Reduce the sum if we match any of the previous rows */ + for (j = 0; j < num_p_filters; j++) + { + if (png_ptr->prev_filters[j] == PNG_FILTER_VALUE_NONE) + { + sumlo = (sumlo * png_ptr->filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + + sumhi = (sumhi * png_ptr->filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + } + } + + /* Factor in the cost of this filter (this is here for completeness, + * but it makes no sense to have a "cost" for the NONE filter, as + * it has the minimum possible computational cost - none). + */ + sumlo = (sumlo * png_ptr->filter_costs[PNG_FILTER_VALUE_NONE]) >> + PNG_COST_SHIFT; + + sumhi = (sumhi * png_ptr->filter_costs[PNG_FILTER_VALUE_NONE]) >> + PNG_COST_SHIFT; + + if (sumhi > PNG_HIMASK) + sum = PNG_MAXSUM; + + else + sum = (sumhi << PNG_HISHIFT) + sumlo; + } +#endif + mins = sum; + } + + /* Sub filter */ + if (filter_to_do == PNG_FILTER_SUB) + /* It's the only filter so no testing is needed */ + { + png_bytep rp, lp, dp; + png_size_t i; + + for (i = 0, rp = row_buf + 1, dp = png_ptr->sub_row + 1; i < bpp; + i++, rp++, dp++) + { + *dp = *rp; + } + + for (lp = row_buf + 1; i < row_bytes; + i++, rp++, lp++, dp++) + { + *dp = (png_byte)(((int)*rp - (int)*lp) & 0xff); + } + + best_row = png_ptr->sub_row; + } + + else if (filter_to_do & PNG_FILTER_SUB) + { + png_bytep rp, dp, lp; + png_uint_32 sum = 0, lmins = mins; + png_size_t i; + int v; + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + /* We temporarily increase the "minimum sum" by the factor we + * would reduce the sum of this filter, so that we can do the + * early exit comparison without scaling the sum each time. + */ + if (png_ptr->heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + int j; + png_uint_32 lmhi, lmlo; + lmlo = lmins & PNG_LOMASK; + lmhi = (lmins >> PNG_HISHIFT) & PNG_HIMASK; + + for (j = 0; j < num_p_filters; j++) + { + if (png_ptr->prev_filters[j] == PNG_FILTER_VALUE_SUB) + { + lmlo = (lmlo * png_ptr->inv_filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + + lmhi = (lmhi * png_ptr->inv_filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + } + } + + lmlo = (lmlo * png_ptr->inv_filter_costs[PNG_FILTER_VALUE_SUB]) >> + PNG_COST_SHIFT; + + lmhi = (lmhi * png_ptr->inv_filter_costs[PNG_FILTER_VALUE_SUB]) >> + PNG_COST_SHIFT; + + if (lmhi > PNG_HIMASK) + lmins = PNG_MAXSUM; + + else + lmins = (lmhi << PNG_HISHIFT) + lmlo; + } +#endif + + for (i = 0, rp = row_buf + 1, dp = png_ptr->sub_row + 1; i < bpp; + i++, rp++, dp++) + { + v = *dp = *rp; + + sum += (v < 128) ? v : 256 - v; + } + + for (lp = row_buf + 1; i < row_bytes; + i++, rp++, lp++, dp++) + { + v = *dp = (png_byte)(((int)*rp - (int)*lp) & 0xff); + + sum += (v < 128) ? v : 256 - v; + + if (sum > lmins) /* We are already worse, don't continue. */ + break; + } + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + if (png_ptr->heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + int j; + png_uint_32 sumhi, sumlo; + sumlo = sum & PNG_LOMASK; + sumhi = (sum >> PNG_HISHIFT) & PNG_HIMASK; + + for (j = 0; j < num_p_filters; j++) + { + if (png_ptr->prev_filters[j] == PNG_FILTER_VALUE_SUB) + { + sumlo = (sumlo * png_ptr->inv_filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + + sumhi = (sumhi * png_ptr->inv_filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + } + } + + sumlo = (sumlo * png_ptr->inv_filter_costs[PNG_FILTER_VALUE_SUB]) >> + PNG_COST_SHIFT; + + sumhi = (sumhi * png_ptr->inv_filter_costs[PNG_FILTER_VALUE_SUB]) >> + PNG_COST_SHIFT; + + if (sumhi > PNG_HIMASK) + sum = PNG_MAXSUM; + + else + sum = (sumhi << PNG_HISHIFT) + sumlo; + } +#endif + + if (sum < mins) + { + mins = sum; + best_row = png_ptr->sub_row; + } + } + + /* Up filter */ + if (filter_to_do == PNG_FILTER_UP) + { + png_bytep rp, dp, pp; + png_size_t i; + + for (i = 0, rp = row_buf + 1, dp = png_ptr->up_row + 1, + pp = prev_row + 1; i < row_bytes; + i++, rp++, pp++, dp++) + { + *dp = (png_byte)(((int)*rp - (int)*pp) & 0xff); + } + + best_row = png_ptr->up_row; + } + + else if (filter_to_do & PNG_FILTER_UP) + { + png_bytep rp, dp, pp; + png_uint_32 sum = 0, lmins = mins; + png_size_t i; + int v; + + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + if (png_ptr->heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + int j; + png_uint_32 lmhi, lmlo; + lmlo = lmins & PNG_LOMASK; + lmhi = (lmins >> PNG_HISHIFT) & PNG_HIMASK; + + for (j = 0; j < num_p_filters; j++) + { + if (png_ptr->prev_filters[j] == PNG_FILTER_VALUE_UP) + { + lmlo = (lmlo * png_ptr->inv_filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + + lmhi = (lmhi * png_ptr->inv_filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + } + } + + lmlo = (lmlo * png_ptr->inv_filter_costs[PNG_FILTER_VALUE_UP]) >> + PNG_COST_SHIFT; + + lmhi = (lmhi * png_ptr->inv_filter_costs[PNG_FILTER_VALUE_UP]) >> + PNG_COST_SHIFT; + + if (lmhi > PNG_HIMASK) + lmins = PNG_MAXSUM; + + else + lmins = (lmhi << PNG_HISHIFT) + lmlo; + } +#endif + + for (i = 0, rp = row_buf + 1, dp = png_ptr->up_row + 1, + pp = prev_row + 1; i < row_bytes; i++) + { + v = *dp++ = (png_byte)(((int)*rp++ - (int)*pp++) & 0xff); + + sum += (v < 128) ? v : 256 - v; + + if (sum > lmins) /* We are already worse, don't continue. */ + break; + } + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + if (png_ptr->heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + int j; + png_uint_32 sumhi, sumlo; + sumlo = sum & PNG_LOMASK; + sumhi = (sum >> PNG_HISHIFT) & PNG_HIMASK; + + for (j = 0; j < num_p_filters; j++) + { + if (png_ptr->prev_filters[j] == PNG_FILTER_VALUE_UP) + { + sumlo = (sumlo * png_ptr->filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + + sumhi = (sumhi * png_ptr->filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + } + } + + sumlo = (sumlo * png_ptr->filter_costs[PNG_FILTER_VALUE_UP]) >> + PNG_COST_SHIFT; + + sumhi = (sumhi * png_ptr->filter_costs[PNG_FILTER_VALUE_UP]) >> + PNG_COST_SHIFT; + + if (sumhi > PNG_HIMASK) + sum = PNG_MAXSUM; + + else + sum = (sumhi << PNG_HISHIFT) + sumlo; + } +#endif + + if (sum < mins) + { + mins = sum; + best_row = png_ptr->up_row; + } + } + + /* Avg filter */ + if (filter_to_do == PNG_FILTER_AVG) + { + png_bytep rp, dp, pp, lp; + png_uint_32 i; + + for (i = 0, rp = row_buf + 1, dp = png_ptr->avg_row + 1, + pp = prev_row + 1; i < bpp; i++) + { + *dp++ = (png_byte)(((int)*rp++ - ((int)*pp++ / 2)) & 0xff); + } + + for (lp = row_buf + 1; i < row_bytes; i++) + { + *dp++ = (png_byte)(((int)*rp++ - (((int)*pp++ + (int)*lp++) / 2)) + & 0xff); + } + best_row = png_ptr->avg_row; + } + + else if (filter_to_do & PNG_FILTER_AVG) + { + png_bytep rp, dp, pp, lp; + png_uint_32 sum = 0, lmins = mins; + png_size_t i; + int v; + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + if (png_ptr->heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + int j; + png_uint_32 lmhi, lmlo; + lmlo = lmins & PNG_LOMASK; + lmhi = (lmins >> PNG_HISHIFT) & PNG_HIMASK; + + for (j = 0; j < num_p_filters; j++) + { + if (png_ptr->prev_filters[j] == PNG_FILTER_VALUE_AVG) + { + lmlo = (lmlo * png_ptr->inv_filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + + lmhi = (lmhi * png_ptr->inv_filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + } + } + + lmlo = (lmlo * png_ptr->inv_filter_costs[PNG_FILTER_VALUE_AVG]) >> + PNG_COST_SHIFT; + + lmhi = (lmhi * png_ptr->inv_filter_costs[PNG_FILTER_VALUE_AVG]) >> + PNG_COST_SHIFT; + + if (lmhi > PNG_HIMASK) + lmins = PNG_MAXSUM; + + else + lmins = (lmhi << PNG_HISHIFT) + lmlo; + } +#endif + + for (i = 0, rp = row_buf + 1, dp = png_ptr->avg_row + 1, + pp = prev_row + 1; i < bpp; i++) + { + v = *dp++ = (png_byte)(((int)*rp++ - ((int)*pp++ / 2)) & 0xff); + + sum += (v < 128) ? v : 256 - v; + } + + for (lp = row_buf + 1; i < row_bytes; i++) + { + v = *dp++ = + (png_byte)(((int)*rp++ - (((int)*pp++ + (int)*lp++) / 2)) & 0xff); + + sum += (v < 128) ? v : 256 - v; + + if (sum > lmins) /* We are already worse, don't continue. */ + break; + } + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + if (png_ptr->heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + int j; + png_uint_32 sumhi, sumlo; + sumlo = sum & PNG_LOMASK; + sumhi = (sum >> PNG_HISHIFT) & PNG_HIMASK; + + for (j = 0; j < num_p_filters; j++) + { + if (png_ptr->prev_filters[j] == PNG_FILTER_VALUE_NONE) + { + sumlo = (sumlo * png_ptr->filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + + sumhi = (sumhi * png_ptr->filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + } + } + + sumlo = (sumlo * png_ptr->filter_costs[PNG_FILTER_VALUE_AVG]) >> + PNG_COST_SHIFT; + + sumhi = (sumhi * png_ptr->filter_costs[PNG_FILTER_VALUE_AVG]) >> + PNG_COST_SHIFT; + + if (sumhi > PNG_HIMASK) + sum = PNG_MAXSUM; + + else + sum = (sumhi << PNG_HISHIFT) + sumlo; + } +#endif + + if (sum < mins) + { + mins = sum; + best_row = png_ptr->avg_row; + } + } + + /* Paeth filter */ + if (filter_to_do == PNG_FILTER_PAETH) + { + png_bytep rp, dp, pp, cp, lp; + png_size_t i; + + for (i = 0, rp = row_buf + 1, dp = png_ptr->paeth_row + 1, + pp = prev_row + 1; i < bpp; i++) + { + *dp++ = (png_byte)(((int)*rp++ - (int)*pp++) & 0xff); + } + + for (lp = row_buf + 1, cp = prev_row + 1; i < row_bytes; i++) + { + int a, b, c, pa, pb, pc, p; + + b = *pp++; + c = *cp++; + a = *lp++; + + p = b - c; + pc = a - c; + +#ifdef PNG_USE_ABS + pa = abs(p); + pb = abs(pc); + pc = abs(p + pc); +#else + pa = p < 0 ? -p : p; + pb = pc < 0 ? -pc : pc; + pc = (p + pc) < 0 ? -(p + pc) : p + pc; +#endif + + p = (pa <= pb && pa <=pc) ? a : (pb <= pc) ? b : c; + + *dp++ = (png_byte)(((int)*rp++ - p) & 0xff); + } + best_row = png_ptr->paeth_row; + } + + else if (filter_to_do & PNG_FILTER_PAETH) + { + png_bytep rp, dp, pp, cp, lp; + png_uint_32 sum = 0, lmins = mins; + png_size_t i; + int v; + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + if (png_ptr->heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + int j; + png_uint_32 lmhi, lmlo; + lmlo = lmins & PNG_LOMASK; + lmhi = (lmins >> PNG_HISHIFT) & PNG_HIMASK; + + for (j = 0; j < num_p_filters; j++) + { + if (png_ptr->prev_filters[j] == PNG_FILTER_VALUE_PAETH) + { + lmlo = (lmlo * png_ptr->inv_filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + + lmhi = (lmhi * png_ptr->inv_filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + } + } + + lmlo = (lmlo * png_ptr->inv_filter_costs[PNG_FILTER_VALUE_PAETH]) >> + PNG_COST_SHIFT; + + lmhi = (lmhi * png_ptr->inv_filter_costs[PNG_FILTER_VALUE_PAETH]) >> + PNG_COST_SHIFT; + + if (lmhi > PNG_HIMASK) + lmins = PNG_MAXSUM; + + else + lmins = (lmhi << PNG_HISHIFT) + lmlo; + } +#endif + + for (i = 0, rp = row_buf + 1, dp = png_ptr->paeth_row + 1, + pp = prev_row + 1; i < bpp; i++) + { + v = *dp++ = (png_byte)(((int)*rp++ - (int)*pp++) & 0xff); + + sum += (v < 128) ? v : 256 - v; + } + + for (lp = row_buf + 1, cp = prev_row + 1; i < row_bytes; i++) + { + int a, b, c, pa, pb, pc, p; + + b = *pp++; + c = *cp++; + a = *lp++; + +#ifndef PNG_SLOW_PAETH + p = b - c; + pc = a - c; +#ifdef PNG_USE_ABS + pa = abs(p); + pb = abs(pc); + pc = abs(p + pc); +#else + pa = p < 0 ? -p : p; + pb = pc < 0 ? -pc : pc; + pc = (p + pc) < 0 ? -(p + pc) : p + pc; +#endif + p = (pa <= pb && pa <=pc) ? a : (pb <= pc) ? b : c; +#else /* PNG_SLOW_PAETH */ + p = a + b - c; + pa = abs(p - a); + pb = abs(p - b); + pc = abs(p - c); + + if (pa <= pb && pa <= pc) + p = a; + + else if (pb <= pc) + p = b; + + else + p = c; +#endif /* PNG_SLOW_PAETH */ + + v = *dp++ = (png_byte)(((int)*rp++ - p) & 0xff); + + sum += (v < 128) ? v : 256 - v; + + if (sum > lmins) /* We are already worse, don't continue. */ + break; + } + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + if (png_ptr->heuristic_method == PNG_FILTER_HEURISTIC_WEIGHTED) + { + int j; + png_uint_32 sumhi, sumlo; + sumlo = sum & PNG_LOMASK; + sumhi = (sum >> PNG_HISHIFT) & PNG_HIMASK; + + for (j = 0; j < num_p_filters; j++) + { + if (png_ptr->prev_filters[j] == PNG_FILTER_VALUE_PAETH) + { + sumlo = (sumlo * png_ptr->filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + + sumhi = (sumhi * png_ptr->filter_weights[j]) >> + PNG_WEIGHT_SHIFT; + } + } + + sumlo = (sumlo * png_ptr->filter_costs[PNG_FILTER_VALUE_PAETH]) >> + PNG_COST_SHIFT; + + sumhi = (sumhi * png_ptr->filter_costs[PNG_FILTER_VALUE_PAETH]) >> + PNG_COST_SHIFT; + + if (sumhi > PNG_HIMASK) + sum = PNG_MAXSUM; + + else + sum = (sumhi << PNG_HISHIFT) + sumlo; + } +#endif + + if (sum < mins) + { + best_row = png_ptr->paeth_row; + } + } +#endif /* PNG_WRITE_FILTER_SUPPORTED */ + + /* Do the actual writing of the filtered row data from the chosen filter. */ + png_write_filtered_row(png_ptr, best_row, row_info->rowbytes+1); + +#ifdef PNG_WRITE_FILTER_SUPPORTED +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED + /* Save the type of filter we picked this time for future calculations */ + if (png_ptr->num_prev_filters > 0) + { + int j; + + for (j = 1; j < num_p_filters; j++) + { + png_ptr->prev_filters[j] = png_ptr->prev_filters[j - 1]; + } + + png_ptr->prev_filters[j] = best_row[0]; + } +#endif +#endif /* PNG_WRITE_FILTER_SUPPORTED */ +} + + +/* Do the actual writing of a previously filtered row. */ +static void +png_write_filtered_row(png_structrp png_ptr, png_bytep filtered_row, + png_size_t full_row_length/*includes filter byte*/) +{ + png_debug(1, "in png_write_filtered_row"); + + png_debug1(2, "filter = %d", filtered_row[0]); + + png_compress_IDAT(png_ptr, filtered_row, full_row_length, Z_NO_FLUSH); + + /* Swap the current and previous rows */ + if (png_ptr->prev_row != NULL) + { + png_bytep tptr; + + tptr = png_ptr->prev_row; + png_ptr->prev_row = png_ptr->row_buf; + png_ptr->row_buf = tptr; + } + + /* Finish row - updates counters and flushes zlib if last row */ + png_write_finish_row(png_ptr); + +#ifdef PNG_WRITE_FLUSH_SUPPORTED + png_ptr->flush_rows++; + + if (png_ptr->flush_dist > 0 && + png_ptr->flush_rows >= png_ptr->flush_dist) + { + png_write_flush(png_ptr); + } +#endif +} +#endif /* PNG_WRITE_SUPPORTED */ diff --git a/src/SDL2/external/libpng-1.6.2/projects/owatcom/libpng.tgt b/src/SDL2/external/libpng-1.6.2/projects/owatcom/libpng.tgt new file mode 100644 index 000000000..4a9622e68 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/owatcom/libpng.tgt @@ -0,0 +1,383 @@ +40 +targetIdent +0 +MProject +1 +MComponent +0 +2 +WString +3 +LIB +3 +WString +5 +n_2sn +1 +0 +0 +4 +MCommand +0 +5 +MCommand +0 +6 +MItem +10 +libpng.lib +7 +WString +3 +LIB +8 +WVList +0 +9 +WVList +1 +10 +ActionStates +11 +WString +5 +&Make +12 +WVList +0 +-1 +1 +1 +0 +13 +WPickList +16 +14 +MItem +3 +*.c +15 +WString +4 +COBJ +16 +WVList +2 +17 +MVState +18 +WString +3 +WCC +19 +WString +25 +n????Include directories: +1 +20 +WString +39 +"$(%zlib);$(%watcom)/h;$(%watcom)/h/nt" +0 +21 +MVState +22 +WString +3 +WCC +23 +WString +25 +n????Include directories: +0 +24 +WString +39 +"$(%zlib);$(%watcom)/h;$(%watcom)/h/nt" +0 +25 +WVList +1 +26 +ActionStates +27 +WString +5 +&Make +28 +WVList +0 +-1 +1 +1 +0 +29 +MItem +11 +..\..\png.c +30 +WString +4 +COBJ +31 +WVList +0 +32 +WVList +0 +14 +1 +1 +0 +33 +MItem +16 +..\..\pngerror.c +34 +WString +4 +COBJ +35 +WVList +0 +36 +WVList +0 +14 +1 +1 +0 +37 +MItem +14 +..\..\pngget.c +38 +WString +4 +COBJ +39 +WVList +0 +40 +WVList +0 +14 +1 +1 +0 +41 +MItem +14 +..\..\pngmem.c +42 +WString +4 +COBJ +43 +WVList +0 +44 +WVList +0 +14 +1 +1 +0 +45 +MItem +16 +..\..\pngpread.c +46 +WString +4 +COBJ +47 +WVList +0 +48 +WVList +0 +14 +1 +1 +0 +49 +MItem +15 +..\..\pngread.c +50 +WString +4 +COBJ +51 +WVList +0 +52 +WVList +0 +14 +1 +1 +0 +53 +MItem +14 +..\..\pngrio.c +54 +WString +4 +COBJ +55 +WVList +0 +56 +WVList +0 +14 +1 +1 +0 +57 +MItem +16 +..\..\pngrtran.c +58 +WString +4 +COBJ +59 +WVList +0 +60 +WVList +0 +14 +1 +1 +0 +61 +MItem +16 +..\..\pngrutil.c +62 +WString +4 +COBJ +63 +WVList +0 +64 +WVList +0 +14 +1 +1 +0 +65 +MItem +14 +..\..\pngset.c +66 +WString +4 +COBJ +67 +WVList +0 +68 +WVList +0 +14 +1 +1 +0 +69 +MItem +16 +..\..\pngtrans.c +70 +WString +4 +COBJ +71 +WVList +0 +72 +WVList +0 +14 +1 +1 +0 +73 +MItem +14 +..\..\pngwio.c +74 +WString +4 +COBJ +75 +WVList +0 +76 +WVList +0 +14 +1 +1 +0 +77 +MItem +16 +..\..\pngwrite.c +78 +WString +4 +COBJ +79 +WVList +0 +80 +WVList +0 +14 +1 +1 +0 +81 +MItem +16 +..\..\pngwtran.c +82 +WString +4 +COBJ +83 +WVList +0 +84 +WVList +0 +14 +1 +1 +0 +85 +MItem +16 +..\..\pngwutil.c +86 +WString +4 +COBJ +87 +WVList +0 +88 +WVList +0 +14 +1 +1 +0 diff --git a/src/SDL2/external/libpng-1.6.2/projects/owatcom/libpng.wpj b/src/SDL2/external/libpng-1.6.2/projects/owatcom/libpng.wpj new file mode 100644 index 000000000..a70d95f96 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/owatcom/libpng.wpj @@ -0,0 +1,112 @@ +40 +projectIdent +0 +VpeMain +1 +WRect +256 +0 +8960 +9294 +2 +MProject +3 +MCommand +322 +# Locations of zlib and (if required) awk (change as required:) +set zlib=..\..\..\zlib +set awk= +# +@if not exist pngconfig.dfa $(MAKE) $(__MAKEOPTS__) -f pngconfig.mak defaults +@if exist config.inf type config.inf +@echo Checking for the libpng configuration file pnglibconf.h +$(MAKE) $(__MAKEOPTS__) -f pngconfig.mak +4 +MCommand +19 +@type pngconfig.inf +4 +5 +WFileName +10 +libpng.tgt +6 +WFileName +11 +pngtest.tgt +7 +WFileName +12 +pngvalid.tgt +8 +WFileName +12 +pngstest.tgt +9 +WVList +4 +10 +VComponent +11 +WRect +0 +0 +5638 +4174 +0 +0 +12 +WFileName +10 +libpng.tgt +0 +0 +13 +VComponent +14 +WRect +1280 +1550 +5638 +4174 +0 +0 +15 +WFileName +11 +pngtest.tgt +0 +1 +16 +VComponent +17 +WRect +524 +497 +5638 +4174 +0 +0 +18 +WFileName +12 +pngvalid.tgt +0 +1 +19 +VComponent +20 +WRect +2054 +2701 +5674 +4232 +0 +0 +21 +WFileName +12 +pngstest.tgt +0 +1 +19 diff --git a/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngconfig.mak b/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngconfig.mak new file mode 100644 index 000000000..054a3fc20 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngconfig.mak @@ -0,0 +1,160 @@ +# This is an OpenWatcom make file which builds pnglibconf.h - the libpng +# configuration header. You can ignore this file if you don't need to +# configure libpng; a default configuration will be built. +# +# For more information build libpng.wpj under the IDE and then read the +# generated files: +# +# config.inf: Basic configuration information for a standard build. +# pngconfig.dfa: Advanced configuration for non-standard libpng builds. +# +DELETE=rm -f +ECHO=echo +COPY=copy +# +# If your configuration needs to test compiler flags when building +# pnglibconf.h you may need to override the following on the wmake command +# line: +CFLAGS= +CC=wcl386 +CPP=$(CC) -pw0 +# +# Read awk from the environment if set, else it can be set on the command +# line (the default approach is to set the %awk% environment variable in the +# IDE libpng.wpj 'before' rule - this setting is local.) +!ifdef %awk +AWK=$(%awk) +!endif +# +# pnglibconf.h must exist in the source directory, this is the final rule +# which copies the local built version (and this is the default target for +# this makefile.) +..\..\pnglibconf.h: pnglibconf.h + $(COPY) pnglibconf.h $@ + +!ifdef AWK +# CPPFLAGS should contain the options to control the result, +# but DEFS and CFLAGS are also supported here, override +# as appropriate +DFNFLAGS = $(DEFS) $(CPPFLAGS) $(CFLAGS) + +pnglibconf.h: pnglibconf.dfn + $(DELETE) $@ dfn.c dfn1.out dfn2.out + $(ECHO) $#include "pnglibconf.dfn" >dfn.c + $(CPP) $(DFNFLAGS) dfn.c >dfn1.out + $(AWK) -f << dfn1.out >dfn2.out +/^.*PNG_DEFN_MAGIC-.*-PNG_DEFN_END.*$$/{ + sub(/^.*PNG_DEFN_MAGIC-/, "") + sub(/ *-PNG_DEFN_END.*$$/, "") + gsub(/ *@@@ */, "") + print +} +<< + $(COPY) dfn2.out $@ + @type << >pngconfig.inf +This is a locally configurable build of libpng.lib; for configuration +instructions consult and edit projects/openwatcom/pngconfig.dfa +<< + $(DELETE) dfn.c dfn1.out dfn2.out + +pnglibconf.dfn: ..\..\scripts\pnglibconf.dfa ..\..\scripts\options.awk pngconfig.dfa ..\..\pngconf.h + $(DELETE) $@ dfn1.out dfn2.out + $(AWK) -f ..\..\scripts\options.awk out=dfn1.out version=search ..\..\pngconf.h ..\..\scripts\pnglibconf.dfa pngconfig.dfa $(DFA_XTRA) 1>&2 + $(AWK) -f ..\..\scripts\options.awk out=dfn2.out dfn1.out 1>&2 + $(COPY) dfn2.out $@ + $(DELETE) dfn1.out dfn2.out + +!else +# The following lines are used to copy scripts\pnglibconf.h.prebuilt and make +# the required change to the calling convention. +# +# By default libpng is built to use the __cdecl calling convention on +# Windows. This gives compatibility with MSVC and GCC. Unfortunately it +# does not work with OpenWatcom because OpenWatcom implements longjmp using +# the __watcall convention (compared with both MSVC and GCC which use __cdecl +# for library functions.) +# +# Thus the default must be changed to build on OpenWatcom and, once changed, +# the result will not be compatible with applications built using other +# compilers (in fact attempts to build will fail at compile time.) +# +pnglibconf.h: ..\..\scripts\pnglibconf.h.prebuilt .existsonly + @$(ECHO) . + @$(ECHO) . + @$(ECHO) $$(AWK) NOT AVAILABLE: COPYING scripts\pnglibconf.h.prebuilt + @$(ECHO) . + @$(ECHO) . + vi -q -k ":1,$$s/PNG_API_RULE 0$$/PNG_API_RULE 2/\n:w! $@\n:q!\n" ..\..\scripts\pnglibconf.h.prebuilt + @$(ECHO) . + @$(ECHO) . + @$(ECHO) YOU HAVE A DEFAULT CONFIGURATION BECAUSE YOU DO NOT HAVE AWK! + @$(ECHO) . + @$(ECHO) . + @type << >pngconfig.inf +This is the default configuration of libpng.lib, if you wish to +change the configuration please consult the instructions in +projects/owatcom/pngconfig.dfa. +<< + +!endif + +# Make the default files +defaults: .symbolic + @$(COPY) << config.inf +$# The libpng project is incompletely configured. To complete configuration +$# please complete the following steps: +$# +$# 1) Edit the 'before' rule of libpng.wpj (from the IDE) to define the +$# locations of the zlib include file zlib.h and the built zlib library, +$# zlib.lib. +$# +$# 2) If you want to change libpng to a non-standard configuration also +$# change the definition of 'awk' in the before rule to the name of your +$# awk command. For more instructions on configuration read +$# pngconfig.dfa. +$# +$# 3) Delete this file (config.inf). +<< + @$(COPY) << pngconfig.dfa +$# pngconfig.dfa: this file contains configuration options for libpng. +$# If emtpy the standard configuration will be built. For this file to be +$# used a working version of the program 'awk' is required and the program +$# must be identified in the 'before' rule of the project. +$# +$# If you don't already have 'awk', or the version of awk you have seems not +$# to work, download Brian Kernighan's awk (Brian Kernighan is the author of +$# awk.) You can find source code and a built executable (called awk95.exe) +$# here: +$# +$# http://www.cs.princeton.edu/~bwk/btl.mirror/ +$# +$# The executable works just fine. +$# +$# If build issues errors after a change to pngconfig.dfa you have entered +$# inconsistent feature requests, or even malformed requests, in +$# pngconfig.dfa. The error messages from awk should be comprehensible, but +$# if not simply go back to the start (nothing but comments in this file) and +$# enter configuration lines one by one until one produces an error. (Or, of +$# course, do the standard binary chop.) +$# +$# You need to rebuild everything after a change to pnglibconf.dfa - i.e. you +$# must do Actions/Mark All Targets for Remake. This is because the compiler +$# generated dependency information (as of OpenWatcom 1.9) does not record the +$# dependency on pnglibconf.h correctly. +$# +$# If awk isn't set then this file is bypassed. If you just want the standard +$# configuration it is automatically produced from the distributed version +$# (scripts\pnglibconf.h.prebuilt) by editting PNG_API_RULE to 2 (to force use +$# of the OpenWatcom library calling convention.) +$# +<< + +clean:: .symbolic + $(DELETE) ..\..\pnglibconf.h pnglibconf.* dfn.c *.out pngconfig.inf + $(DELETE) *.obj *.mbr *.sym *.err *.pch libpng.mk + $(DELETE) libpng.lib libpng.lbr libpng.lb1 libpng.cbr libpng.mk1 + $(DELETE) pngtest.exe pngtest.map pngtest.lk1 pngtest.mk1 + $(DELETE) pngvalid.exe pngvalid.map pngvalid.lk1 pngvalid.mk1 + +distclean:: clean .symbolic + $(DELETE) zlib.inf awk.inf config.inf pngconfig.dfa diff --git a/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngstest.tgt b/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngstest.tgt new file mode 100644 index 000000000..f5d024518 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngstest.tgt @@ -0,0 +1,219 @@ +40 +targetIdent +0 +MProject +1 +MComponent +0 +2 +WString +4 +NEXE +3 +WString +5 +nc2en +1 +0 +0 +4 +MCommand +0 +5 +MCommand +1118 +pngstest --strict --log ../../contrib/pngsuite/basn0g01.png ../../contrib/pngsuite/basn0g02.png ../../contrib/pngsuite/basn0g04.png ../../contrib/pngsuite/basn0g08.png ../../contrib/pngsuite/basn0g16.png ../../contrib/pngsuite/basn2c08.png ../../contrib/pngsuite/basn2c16.png ../../contrib/pngsuite/basn3p01.png ../../contrib/pngsuite/basn3p02.png ../../contrib/pngsuite/basn3p04.png ../../contrib/pngsuite/basn3p08.png ../../contrib/pngsuite/basn4a08.png ../../contrib/pngsuite/basn4a16.png ../../contrib/pngsuite/basn6a08.png ../../contrib/pngsuite/basn6a16.png ../../contrib/pngsuite/ftbbn0g04.png ../../contrib/pngsuite/ftbbn0g01.png ../../contrib/pngsuite/ftbbn0g02.png ../../contrib/pngsuite/ftbbn2c16.png ../../contrib/pngsuite/ftbbn3p08.png ../../contrib/pngsuite/ftbgn2c16.png ../../contrib/pngsuite/ftbgn3p08.png ../../contrib/pngsuite/ftbrn2c08.png ../../contrib/pngsuite/ftbwn0g16.png ../../contrib/pngsuite/ftbwn3p08.png ../../contrib/pngsuite/ftbyn3p08.png ../../contrib/pngsuite/ftp0n0g08.png ../../contrib/pngsuite/ftp0n2c08.png ../../contrib/pngsuite/ftp0n3p08.png ../../contrib/pngsuite/ftp1n3p08.png +6 +MItem +12 +pngstest.exe +7 +WString +4 +NEXE +8 +WVList +6 +9 +MVState +10 +WString +7 +WINLINK +11 +WString +11 +?????Stack: +1 +12 +WString +4 +768k +0 +13 +MVState +14 +WString +7 +WINLINK +15 +WString +28 +?????Library directories(;): +1 +16 +WString +8 +$(%zlib) +0 +17 +MVState +18 +WString +7 +WINLINK +19 +WString +18 +?????Libraries(,): +1 +20 +WString +19 +libpng.lib zlib.lib +0 +21 +MVState +22 +WString +7 +WINLINK +23 +WString +11 +?????Stack: +0 +24 +WString +4 +768k +0 +25 +MVState +26 +WString +7 +WINLINK +27 +WString +28 +?????Library directories(;): +0 +28 +WString +8 +$(%zlib) +0 +29 +MVState +30 +WString +7 +WINLINK +31 +WString +18 +?????Libraries(,): +0 +32 +WString +19 +libpng.lib zlib.lib +0 +33 +WVList +1 +34 +ActionStates +35 +WString +4 +&Run +36 +WVList +0 +-1 +1 +1 +0 +37 +WPickList +2 +38 +MItem +3 +*.c +39 +WString +4 +COBJ +40 +WVList +2 +41 +MVState +42 +WString +3 +WCC +43 +WString +25 +n????Include directories: +1 +44 +WString +39 +"$(%zlib);$(%watcom)/h;$(%watcom)/h/nt" +0 +45 +MVState +46 +WString +3 +WCC +47 +WString +25 +n????Include directories: +0 +48 +WString +39 +"$(%zlib);$(%watcom)/h;$(%watcom)/h/nt" +0 +49 +WVList +0 +-1 +1 +1 +0 +50 +MItem +33 +..\..\contrib\libtests\pngstest.c +51 +WString +4 +COBJ +52 +WVList +0 +53 +WVList +0 +38 +1 +1 +0 diff --git a/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngtest.tgt b/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngtest.tgt new file mode 100644 index 000000000..211f1a748 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngtest.tgt @@ -0,0 +1,179 @@ +40 +targetIdent +0 +MProject +1 +MComponent +0 +2 +WString +4 +NEXE +3 +WString +5 +nc2en +1 +0 +0 +4 +MCommand +0 +5 +MCommand +34 +cd ..\.. +projects\owatcom\pngtest +6 +MItem +11 +pngtest.exe +7 +WString +4 +NEXE +8 +WVList +4 +9 +MVState +10 +WString +7 +WINLINK +11 +WString +28 +?????Library directories(;): +1 +12 +WString +8 +$(%zlib) +0 +13 +MVState +14 +WString +7 +WINLINK +15 +WString +18 +?????Libraries(,): +1 +16 +WString +19 +libpng.lib zlib.lib +0 +17 +MVState +18 +WString +7 +WINLINK +19 +WString +28 +?????Library directories(;): +0 +20 +WString +8 +$(%zlib) +0 +21 +MVState +22 +WString +7 +WINLINK +23 +WString +18 +?????Libraries(,): +0 +24 +WString +19 +libpng.lib zlib.lib +0 +25 +WVList +0 +-1 +1 +1 +0 +26 +WPickList +2 +27 +MItem +3 +*.c +28 +WString +4 +COBJ +29 +WVList +2 +30 +MVState +31 +WString +3 +WCC +32 +WString +25 +n????Include directories: +1 +33 +WString +39 +"$(%zlib);$(%watcom)/h;$(%watcom)/h/nt" +0 +34 +MVState +35 +WString +3 +WCC +36 +WString +25 +n????Include directories: +0 +37 +WString +39 +"$(%zlib);$(%watcom)/h;$(%watcom)/h/nt" +0 +38 +WVList +0 +-1 +1 +1 +0 +39 +MItem +15 +..\..\pngtest.c +40 +WString +4 +COBJ +41 +WVList +0 +42 +WVList +0 +27 +1 +1 +0 diff --git a/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngvalid.tgt b/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngvalid.tgt new file mode 100644 index 000000000..1e78e75cb --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/owatcom/pngvalid.tgt @@ -0,0 +1,210 @@ +40 +targetIdent +0 +MProject +1 +MComponent +0 +2 +WString +4 +NEXE +3 +WString +5 +nc2en +1 +0 +0 +4 +MCommand +0 +5 +MCommand +8 +pngvalid +6 +MItem +12 +pngvalid.exe +7 +WString +4 +NEXE +8 +WVList +6 +9 +MVState +10 +WString +7 +WINLINK +11 +WString +11 +?????Stack: +1 +12 +WString +4 +768k +0 +13 +MVState +14 +WString +7 +WINLINK +15 +WString +28 +?????Library directories(;): +1 +16 +WString +8 +$(%zlib) +0 +17 +MVState +18 +WString +7 +WINLINK +19 +WString +18 +?????Libraries(,): +1 +20 +WString +19 +libpng.lib zlib.lib +0 +21 +MVState +22 +WString +7 +WINLINK +23 +WString +11 +?????Stack: +0 +24 +WString +4 +768k +0 +25 +MVState +26 +WString +7 +WINLINK +27 +WString +28 +?????Library directories(;): +0 +28 +WString +8 +$(%zlib) +0 +29 +MVState +30 +WString +7 +WINLINK +31 +WString +18 +?????Libraries(,): +0 +32 +WString +19 +libpng.lib zlib.lib +0 +33 +WVList +0 +-1 +1 +1 +0 +34 +WPickList +2 +35 +MItem +3 +*.c +36 +WString +4 +COBJ +37 +WVList +2 +38 +MVState +39 +WString +3 +WCC +40 +WString +25 +n????Include directories: +1 +41 +WString +39 +"$(%zlib);$(%watcom)/h;$(%watcom)/h/nt" +0 +42 +MVState +43 +WString +3 +WCC +44 +WString +25 +n????Include directories: +0 +45 +WString +39 +"$(%zlib);$(%watcom)/h;$(%watcom)/h/nt" +0 +46 +WVList +0 +-1 +1 +1 +0 +47 +MItem +33 +..\..\contrib\libtests\pngvalid.c +48 +WString +4 +COBJ +49 +WVList +0 +50 +WVList +0 +35 +1 +1 +0 diff --git a/src/SDL2/external/libpng-1.6.2/projects/visualc71/PRJ0041.mak b/src/SDL2/external/libpng-1.6.2/projects/visualc71/PRJ0041.mak new file mode 100644 index 000000000..c7a68b503 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/visualc71/PRJ0041.mak @@ -0,0 +1,21 @@ +# Prevent "Cannot find missing dependency..." warnings while compiling +# pngwin.rc (PRJ0041). + +all: $(IntDir)\alloc.h \ + $(IntDir)\fp.h \ + $(IntDir)\m68881.h \ + $(IntDir)\mem.h \ + $(IntDir)\pngusr.h \ + $(IntDir)\strings.h \ + $(IntDir)\unistd.h \ + $(IntDir)\unixio.h + +$(IntDir)\alloc.h \ +$(IntDir)\fp.h \ +$(IntDir)\m68881.h \ +$(IntDir)\mem.h \ +$(IntDir)\pngusr.h \ +$(IntDir)\strings.h \ +$(IntDir)\unistd.h \ +$(IntDir)\unixio.h: + @!echo.>$@ diff --git a/src/SDL2/external/libpng-1.6.2/projects/visualc71/README.txt b/src/SDL2/external/libpng-1.6.2/projects/visualc71/README.txt new file mode 100644 index 000000000..34565e4d0 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/visualc71/README.txt @@ -0,0 +1,58 @@ +Microsoft Developer Studio Project File, Format Version 7.10 for libpng. + +Copyright (C) 2004 Simon-Pierre Cadieux. + +This code is released under the libpng license. +For conditions of distribution and use, see copyright notice in png.h + +NOTE: This project will be removed from libpng-1.5.0. It has +been replaced with the "vstudio" project. + +Assumptions: +* The libpng source files are in ..\.. +* The zlib source files are in ..\..\..\zlib +* The zlib project file is in . /* Warning: This is until the zlib project + files get intergrated into the next zlib release. The final zlib project + directory will then be ..\..\..\zlib\projects\visualc71. */ + +To use: + +1) On the main menu, select "File | Open Solution". + Open "libpng.sln". + +2) Display the Solution Explorer view (Ctrl+Alt+L) + +3) Set one of the project as the StartUp project. If you just want to build the + binaries set "libpng" as the startup project (Select "libpng" tree view + item + Project | Set as StartUp project). If you want to build and test the + binaries set it to "pngtest" (Select "pngtest" tree view item + + Project | Set as StartUp project) + +4) Select "Build | Configuration Manager...". + Choose the configuration you wish to build. + +5) Select "Build | Clean Solution". + +6) Select "Build | Build Solution (Ctrl-Shift-B)" + +This project builds the libpng binaries as follows: + +* Win32_DLL_Release\libpng16.dll DLL build +* Win32_DLL_Debug\libpng16d.dll DLL build (debug version) +* Win32_DLL_VB\libpng16vb.dll DLL build for Visual Basic, using stdcall +* Win32_LIB_Release\libpng.lib static build +* Win32_LIB_Debug\libpngd.lib static build (debug version) + +Notes: + +If you change anything in the source files, or select different compiler +settings, please change the DLL name to something different than any of +the above names. Also, make sure that in your "pngusr.h" you define +PNG_USER_PRIVATEBUILD and PNG_USER_DLLFNAME_POSTFIX according to the +instructions provided in "pngconf.h". + +All DLLs built by this project use the Microsoft dynamic C runtime library +MSVCR71.DLL (MSVCR71D.DLL for debug versions). If you distribute any of the +above mentioned libraries you may have to include this DLL in your package. +For a list of files that are redistributable in Visual Studio see +$(VCINSTALLDIR)\redist.txt. diff --git a/src/SDL2/external/libpng-1.6.2/projects/visualc71/README_zlib.txt b/src/SDL2/external/libpng-1.6.2/projects/visualc71/README_zlib.txt new file mode 100644 index 000000000..81d11cbb5 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/visualc71/README_zlib.txt @@ -0,0 +1,44 @@ +/* WARNING: This file was put in the LibPNG distribution for convenience only. + It is expected to be part of the next zlib release under + "projects\visualc71\README.txt." */ + +Microsoft Developer Studio Project File, Format Version 7.10 for zlib. + +Copyright (C) 2004 Simon-Pierre Cadieux. +Copyright (C) 2004 Cosmin Truta. + +This code is released under the libpng license. +For conditions of distribution and use, see copyright notice in zlib.h. + +NOTE: This project will be removed from libpng-1.5.0. It has +been replaced with the "vstudio" project. + +To use: + +1) On the main menu, select "File | Open Solution". + Open "zlib.sln". + +2) Display the Solution Explorer view (Ctrl+Alt+L) + +3) Set one of the project as the StartUp project. If you just want to build the + binaries set "zlib" as the startup project (Select "zlib" tree view item + + Project | Set as StartUp project). If you want to build and test the + binaries set it to "example" (Select "example" tree view item + Project | + Set as StartUp project), If you want to build the minigzip utility set it to + "minigzip" (Select "minigzip" tree view item + Project | Set as StartUp + project + +4) Select "Build | Configuration Manager...". + Choose the configuration you wish to build. + +5) Select "Build | Clean Solution". + +6) Select "Build | Build Solution (Ctrl-Shift-B)" + +This project builds the zlib binaries as follows: + +* Win32_DLL_Release\zlib1.dll DLL build +* Win32_DLL_Debug\zlib1d.dll DLL build (debug version) +* Win32_LIB_Release\zlib.lib static build +* Win32_LIB_Debug\zlibd.lib static build (debug version) + diff --git a/src/SDL2/external/libpng-1.6.2/projects/visualc71/libpng.sln b/src/SDL2/external/libpng-1.6.2/projects/visualc71/libpng.sln new file mode 100644 index 000000000..eeb101f2e --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/visualc71/libpng.sln @@ -0,0 +1,60 @@ +Microsoft Visual Studio Solution File, Format Version 8.00 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libpng", "libpng.vcproj", "{0008960E-E0DD-41A6-8265-00B31DDB4C21}" + ProjectSection(ProjectDependencies) = postProject + {2D4F8105-7D21-454C-9932-B47CAB71A5C0} = {2D4F8105-7D21-454C-9932-B47CAB71A5C0} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "pngtest", "pngtest.vcproj", "{FD1C2F86-9EEF-47BD-95A4-530917E17FDA}" + ProjectSection(ProjectDependencies) = postProject + {0008960E-E0DD-41A6-8265-00B31DDB4C21} = {0008960E-E0DD-41A6-8265-00B31DDB4C21} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlib", "zlib.vcproj", "{2D4F8105-7D21-454C-9932-B47CAB71A5C0}" + ProjectSection(ProjectDependencies) = postProject + EndProjectSection +EndProject +Global + GlobalSection(SolutionConfiguration) = preSolution + DLL Debug = DLL Debug + DLL Release = DLL Release + DLL VB = DLL VB + LIB Debug = LIB Debug + LIB Release = LIB Release + EndGlobalSection + GlobalSection(ProjectConfiguration) = postSolution + {0008960E-E0DD-41A6-8265-00B31DDB4C21}.DLL Debug.ActiveCfg = DLL Debug|Win32 + {0008960E-E0DD-41A6-8265-00B31DDB4C21}.DLL Debug.Build.0 = DLL Debug|Win32 + {0008960E-E0DD-41A6-8265-00B31DDB4C21}.DLL Release.ActiveCfg = DLL Release|Win32 + {0008960E-E0DD-41A6-8265-00B31DDB4C21}.DLL Release.Build.0 = DLL Release|Win32 + {0008960E-E0DD-41A6-8265-00B31DDB4C21}.DLL VB.ActiveCfg = DLL VB|Win32 + {0008960E-E0DD-41A6-8265-00B31DDB4C21}.DLL VB.Build.0 = DLL VB|Win32 + {0008960E-E0DD-41A6-8265-00B31DDB4C21}.LIB Debug.ActiveCfg = LIB Debug|Win32 + {0008960E-E0DD-41A6-8265-00B31DDB4C21}.LIB Debug.Build.0 = LIB Debug|Win32 + {0008960E-E0DD-41A6-8265-00B31DDB4C21}.LIB Release.ActiveCfg = LIB Release|Win32 + {0008960E-E0DD-41A6-8265-00B31DDB4C21}.LIB Release.Build.0 = LIB Release|Win32 + {FD1C2F86-9EEF-47BD-95A4-530917E17FDA}.DLL Debug.ActiveCfg = DLL Debug|Win32 + {FD1C2F86-9EEF-47BD-95A4-530917E17FDA}.DLL Debug.Build.0 = DLL Debug|Win32 + {FD1C2F86-9EEF-47BD-95A4-530917E17FDA}.DLL Release.ActiveCfg = DLL Release|Win32 + {FD1C2F86-9EEF-47BD-95A4-530917E17FDA}.DLL Release.Build.0 = DLL Release|Win32 + {FD1C2F86-9EEF-47BD-95A4-530917E17FDA}.DLL VB.ActiveCfg = DLL VB|Win32 + {FD1C2F86-9EEF-47BD-95A4-530917E17FDA}.DLL VB.Build.0 = DLL VB|Win32 + {FD1C2F86-9EEF-47BD-95A4-530917E17FDA}.LIB Debug.ActiveCfg = LIB Debug|Win32 + {FD1C2F86-9EEF-47BD-95A4-530917E17FDA}.LIB Debug.Build.0 = LIB Debug|Win32 + {FD1C2F86-9EEF-47BD-95A4-530917E17FDA}.LIB Release.ActiveCfg = LIB Release|Win32 + {FD1C2F86-9EEF-47BD-95A4-530917E17FDA}.LIB Release.Build.0 = LIB Release|Win32 + {2D4F8105-7D21-454C-9932-B47CAB71A5C0}.DLL Debug.ActiveCfg = DLL Debug|Win32 + {2D4F8105-7D21-454C-9932-B47CAB71A5C0}.DLL Debug.Build.0 = DLL Debug|Win32 + {2D4F8105-7D21-454C-9932-B47CAB71A5C0}.DLL Release.ActiveCfg = DLL Release|Win32 + {2D4F8105-7D21-454C-9932-B47CAB71A5C0}.DLL Release.Build.0 = DLL Release|Win32 + {2D4F8105-7D21-454C-9932-B47CAB71A5C0}.DLL VB.ActiveCfg = DLL Release|Win32 + {2D4F8105-7D21-454C-9932-B47CAB71A5C0}.DLL VB.Build.0 = DLL Release|Win32 + {2D4F8105-7D21-454C-9932-B47CAB71A5C0}.LIB Debug.ActiveCfg = LIB Debug|Win32 + {2D4F8105-7D21-454C-9932-B47CAB71A5C0}.LIB Debug.Build.0 = LIB Debug|Win32 + {2D4F8105-7D21-454C-9932-B47CAB71A5C0}.LIB Release.ActiveCfg = LIB Release|Win32 + {2D4F8105-7D21-454C-9932-B47CAB71A5C0}.LIB Release.Build.0 = LIB Release|Win32 + EndGlobalSection + GlobalSection(ExtensibilityGlobals) = postSolution + EndGlobalSection + GlobalSection(ExtensibilityAddIns) = postSolution + EndGlobalSection +EndGlobal diff --git a/src/SDL2/external/libpng-1.6.2/projects/visualc71/libpng.vcproj b/src/SDL2/external/libpng-1.6.2/projects/visualc71/libpng.vcproj new file mode 100644 index 000000000..608ec4e6b --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/visualc71/libpng.vcproj @@ -0,0 +1,419 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/external/libpng-1.6.2/projects/visualc71/pngtest.vcproj b/src/SDL2/external/libpng-1.6.2/projects/visualc71/pngtest.vcproj new file mode 100644 index 000000000..3b48f1cf6 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/visualc71/pngtest.vcproj @@ -0,0 +1,267 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/external/libpng-1.6.2/projects/visualc71/zlib.vcproj b/src/SDL2/external/libpng-1.6.2/projects/visualc71/zlib.vcproj new file mode 100644 index 000000000..eb218488d --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/visualc71/zlib.vcproj @@ -0,0 +1,391 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/external/libpng-1.6.2/projects/vstudio/WARNING b/src/SDL2/external/libpng-1.6.2/projects/vstudio/WARNING new file mode 100644 index 000000000..da002c937 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/vstudio/WARNING @@ -0,0 +1,27 @@ +WARNING +======= +Libpng 1.6 does not use the default run-time library when building static +library builds of libpng; instead of the shared DLL runtime it uses a static +runtime. If you need to change this make sure to change the setting on all the +relevant projects: + +libpng +zlib +all the test programs + +The runtime library settings for each build are as follows: + + Release Debug +DLL /MD /MDd +Library /MT /MTd + +NOTICE that libpng 1.5 erroneously used /MD for Debug DLL builds; if you used +the debug builds in your app and you changed your app to use /MD you will need +to change it to /MDd for libpng 1.6. + +The Visual Studio 2010 defaults for a Win32 DLL or Static Library project are +as follows: + + Release Debug +DLL /MD /MDd +Static Library /MD /MDd diff --git a/src/SDL2/external/libpng-1.6.2/projects/vstudio/libpng/libpng.vcxproj b/src/SDL2/external/libpng-1.6.2/projects/vstudio/libpng/libpng.vcxproj new file mode 100644 index 000000000..de7fc3c41 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/vstudio/libpng/libpng.vcxproj @@ -0,0 +1,234 @@ + + + + + Debug Library + Win32 + + + Debug + Win32 + + + Release Library + Win32 + + + Release + Win32 + + + + {D6973076-9317-4EF2-A0B8-B7A18AC0713E} + Win32Proj + libpng + + + + + DynamicLibrary + MultiByte + true + + + StaticLibrary + MultiByte + + + DynamicLibrary + true + MultiByte + + + StaticLibrary + MultiByte + + + + + + + + + + + + + + + + + + + false + + + $(ProjectName)16 + + + false + + $(ProjectName)16 + + + false + + + $(ProjectName)16 + + + false + + $(ProjectName)16 + + + + Use + Level4 + false + ProgramDatabase + EnableFastChecks + WIN32;_DEBUG;_WINDOWS;_USRDLL;%(PreprocessorDefinitions) + true + true + false + false + pngpriv.h + true + CompileAsC + true + 4996;4127 + $(ZLibSrcDir);%(AdditionalIncludeDirectories) + true + Disabled + MultiThreadedDebugDLL + + + Windows + true + zlib.lib + 16 + $(OutDir) + + + + + Use + Level4 + false + ProgramDatabase + Disabled + EnableFastChecks + WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions) + true + true + false + false + pngpriv.h + true + CompileAsC + true + 4996;4127 + $(ZLibSrcDir);%(AdditionalIncludeDirectories) + true + MultiThreadedDebug + + + Windows + true + + + + + Level4 + Use + ProgramDatabase + true + true + WIN32;NDEBUG;_WINDOWS;_USRDLL;%(PreprocessorDefinitions) + false + false + pngpriv.h + true + CompileAsC + true + false + 4996;4127 + $(ZLibSrcDir);%(AdditionalIncludeDirectories) + true + Full + + + Windows + true + true + true + zlib.lib + 16 + $(OutDir) + + + + + Level4 + Use + ProgramDatabase + MultiThreaded + true + true + WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions) + false + false + pngpriv.h + true + CompileAsC + true + false + 4996;4127 + $(ZLibSrcDir);%(AdditionalIncludeDirectories) + true + Full + true + + + Windows + true + true + true + + + true + + + + + Create + Create + Create + Create + + + + + + + + + + + + + + + + + + + true + true + + + + + + diff --git a/src/SDL2/external/libpng-1.6.2/projects/vstudio/pnglibconf/pnglibconf.vcxproj b/src/SDL2/external/libpng-1.6.2/projects/vstudio/pnglibconf/pnglibconf.vcxproj new file mode 100644 index 000000000..e2a232cb6 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/vstudio/pnglibconf/pnglibconf.vcxproj @@ -0,0 +1,61 @@ + + + + + Release + Win32 + + + + {EB33566E-DA7F-4D28-9077-88C0B7C77E35} + pnglibconf + + + + Application + false + true + MultiByte + + + + + + + + + + + Build + + + + Level3 + MaxSpeed + true + true + + + true + true + true + + + copy ..\..\..\scripts\pnglibconf.h.prebuilt ..\..\..\pnglibconf.h + + + Generating pnglibconf.h + + + ..\..\..\pnglibconf.h + + + ..\..\..\scripts\pnglibconf.h.prebuilt + + + + + + + + diff --git a/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngstest/pngstest.vcxproj b/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngstest/pngstest.vcxproj new file mode 100644 index 000000000..0d2980dd8 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngstest/pngstest.vcxproj @@ -0,0 +1,219 @@ + + + + + Debug Library + Win32 + + + Debug + Win32 + + + Release Library + Win32 + + + Release + Win32 + + + + {277AC57F-313B-4D06-B119-A3CDB672D2FF} + Win32Proj + pngstest + + + + + Application + Unicode + + + Application + Unicode + + + Application + Unicode + + + Application + Unicode + + + + + + + + + + + + + + + + + + + false + + + + false + + + + false + + + + false + + + + + NotUsing + Level4 + false + ProgramDatabase + Disabled + EnableFastChecks + WIN32;_DEBUG;_CONSOLE;PNG_USE_DLL;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + true + false + true + false + MultiThreadedDebugDLL + + + Console + true + libpng16.lib + $(OutDir) + + + Executing libpng simplified API test program + "$(OutDir)pngstest.exe" --strict --log --touch "$(IntDir)pngstest.out" ../../../contrib/pngsuite/basn0g01.png ../../../contrib/pngsuite/basn0g02.png ../../../contrib/pngsuite/basn0g04.png ../../../contrib/pngsuite/basn0g08.png ../../../contrib/pngsuite/basn0g16.png ../../../contrib/pngsuite/basn2c08.png ../../../contrib/pngsuite/basn2c16.png ../../../contrib/pngsuite/basn3p01.png ../../../contrib/pngsuite/basn3p02.png ../../../contrib/pngsuite/basn3p04.png ../../../contrib/pngsuite/basn3p08.png ../../../contrib/pngsuite/basn4a08.png ../../../contrib/pngsuite/basn4a16.png ../../../contrib/pngsuite/basn6a08.png ../../../contrib/pngsuite/basn6a16.png ../../../contrib/pngsuite/ftbbn0g01.png ../../../contrib/pngsuite/ftbbn0g02.png ../../../contrib/pngsuite/ftbbn0g04.png ../../../contrib/pngsuite/ftbbn2c16.png ../../../contrib/pngsuite/ftbbn3p08.png ../../../contrib/pngsuite/ftbgn2c16.png ../../../contrib/pngsuite/ftbgn3p08.png ../../../contrib/pngsuite/ftbrn2c08.png ../../../contrib/pngsuite/ftbwn0g16.png ../../../contrib/pngsuite/ftbwn3p08.png ../../../contrib/pngsuite/ftbyn3p08.png ../../../contrib/pngsuite/ftp0n0g08.png ../../../contrib/pngsuite/ftp0n2c08.png ../../../contrib/pngsuite/ftp0n3p08.png ../../../contrib/pngsuite/ftp1n3p08.png + $(IntDir)pngstest.out + $(OutDir)pngstest.exe + + + + + NotUsing + Level4 + false + ProgramDatabase + Disabled + EnableFastChecks + MultiThreadedDebug + WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + true + false + true + false + + + Console + true + libpng16.lib;zlib.lib + $(OutDir) + + + Executing libpng simplified API test program + "$(OutDir)pngstest.exe" --strict --log --touch "$(IntDir)pngstest.out" ../../../contrib/pngsuite/basn0g01.png ../../../contrib/pngsuite/basn0g02.png ../../../contrib/pngsuite/basn0g04.png ../../../contrib/pngsuite/basn0g08.png ../../../contrib/pngsuite/basn0g16.png ../../../contrib/pngsuite/basn2c08.png ../../../contrib/pngsuite/basn2c16.png ../../../contrib/pngsuite/basn3p01.png ../../../contrib/pngsuite/basn3p02.png ../../../contrib/pngsuite/basn3p04.png ../../../contrib/pngsuite/basn3p08.png ../../../contrib/pngsuite/basn4a08.png ../../../contrib/pngsuite/basn4a16.png ../../../contrib/pngsuite/basn6a08.png ../../../contrib/pngsuite/basn6a16.png ../../../contrib/pngsuite/ftbbn0g01.png ../../../contrib/pngsuite/ftbbn0g02.png ../../../contrib/pngsuite/ftbbn0g04.png ../../../contrib/pngsuite/ftbbn2c16.png ../../../contrib/pngsuite/ftbbn3p08.png ../../../contrib/pngsuite/ftbgn2c16.png ../../../contrib/pngsuite/ftbgn3p08.png ../../../contrib/pngsuite/ftbrn2c08.png ../../../contrib/pngsuite/ftbwn0g16.png ../../../contrib/pngsuite/ftbwn3p08.png ../../../contrib/pngsuite/ftbyn3p08.png ../../../contrib/pngsuite/ftp0n0g08.png ../../../contrib/pngsuite/ftp0n2c08.png ../../../contrib/pngsuite/ftp0n3p08.png ../../../contrib/pngsuite/ftp1n3p08.png + $(IntDir)pngstest.out + $(OutDir)pngstest.exe + + + + + Level4 + NotUsing + ProgramDatabase + Full + false + true + WIN32;NDEBUG;_CONSOLE;PNG_USE_DLL;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + false + true + true + false + + + Console + true + true + true + libpng16.lib + $(OutDir) + UseLinkTimeCodeGeneration + + + Executing libpng simplified API test program + "$(OutDir)pngstest.exe" --strict --log --touch "$(IntDir)pngstest.out" ../../../contrib/pngsuite/basn0g01.png ../../../contrib/pngsuite/basn0g02.png ../../../contrib/pngsuite/basn0g04.png ../../../contrib/pngsuite/basn0g08.png ../../../contrib/pngsuite/basn0g16.png ../../../contrib/pngsuite/basn2c08.png ../../../contrib/pngsuite/basn2c16.png ../../../contrib/pngsuite/basn3p01.png ../../../contrib/pngsuite/basn3p02.png ../../../contrib/pngsuite/basn3p04.png ../../../contrib/pngsuite/basn3p08.png ../../../contrib/pngsuite/basn4a08.png ../../../contrib/pngsuite/basn4a16.png ../../../contrib/pngsuite/basn6a08.png ../../../contrib/pngsuite/basn6a16.png ../../../contrib/pngsuite/ftbbn0g01.png ../../../contrib/pngsuite/ftbbn0g02.png ../../../contrib/pngsuite/ftbbn0g04.png ../../../contrib/pngsuite/ftbbn2c16.png ../../../contrib/pngsuite/ftbbn3p08.png ../../../contrib/pngsuite/ftbgn2c16.png ../../../contrib/pngsuite/ftbgn3p08.png ../../../contrib/pngsuite/ftbrn2c08.png ../../../contrib/pngsuite/ftbwn0g16.png ../../../contrib/pngsuite/ftbwn3p08.png ../../../contrib/pngsuite/ftbyn3p08.png ../../../contrib/pngsuite/ftp0n0g08.png ../../../contrib/pngsuite/ftp0n2c08.png ../../../contrib/pngsuite/ftp0n3p08.png ../../../contrib/pngsuite/ftp1n3p08.png + $(IntDir)pngstest.out + $(OutDir)pngstest.exe + + + + + Level4 + NotUsing + ProgramDatabase + Full + MultiThreaded + false + true + WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + false + true + true + false + + + Console + true + true + true + libpng16.lib;zlib.lib + $(OutDir) + UseLinkTimeCodeGeneration + + + Executing libpng simplified API test program + "$(OutDir)pngstest.exe" --strict --log --touch "$(IntDir)pngstest.out" ../../../contrib/pngsuite/basn0g01.png ../../../contrib/pngsuite/basn0g02.png ../../../contrib/pngsuite/basn0g04.png ../../../contrib/pngsuite/basn0g08.png ../../../contrib/pngsuite/basn0g16.png ../../../contrib/pngsuite/basn2c08.png ../../../contrib/pngsuite/basn2c16.png ../../../contrib/pngsuite/basn3p01.png ../../../contrib/pngsuite/basn3p02.png ../../../contrib/pngsuite/basn3p04.png ../../../contrib/pngsuite/basn3p08.png ../../../contrib/pngsuite/basn4a08.png ../../../contrib/pngsuite/basn4a16.png ../../../contrib/pngsuite/basn6a08.png ../../../contrib/pngsuite/basn6a16.png ../../../contrib/pngsuite/ftbbn0g01.png ../../../contrib/pngsuite/ftbbn0g02.png ../../../contrib/pngsuite/ftbbn0g04.png ../../../contrib/pngsuite/ftbbn2c16.png ../../../contrib/pngsuite/ftbbn3p08.png ../../../contrib/pngsuite/ftbgn2c16.png ../../../contrib/pngsuite/ftbgn3p08.png ../../../contrib/pngsuite/ftbrn2c08.png ../../../contrib/pngsuite/ftbwn0g16.png ../../../contrib/pngsuite/ftbwn3p08.png ../../../contrib/pngsuite/ftbyn3p08.png ../../../contrib/pngsuite/ftp0n0g08.png ../../../contrib/pngsuite/ftp0n2c08.png ../../../contrib/pngsuite/ftp0n3p08.png ../../../contrib/pngsuite/ftp1n3p08.png + $(IntDir)pngstest.out + $(OutDir)pngstest.exe + + + + + + + + + diff --git a/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngtest/pngtest.vcxproj b/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngtest/pngtest.vcxproj new file mode 100644 index 000000000..bf9266f75 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngtest/pngtest.vcxproj @@ -0,0 +1,220 @@ + + + + + Debug Library + Win32 + + + Debug + Win32 + + + Release Library + Win32 + + + Release + Win32 + + + + {228BA965-50D5-42B2-8BCF-AFCC227E3C1D} + Win32Proj + pngtest + + + + + Application + Unicode + + + Application + Unicode + + + Application + Unicode + + + Application + Unicode + + + + + + + + + + + + + + + + + + + false + + + + false + + + + false + + + + false + + + + + NotUsing + Level4 + false + ProgramDatabase + Disabled + EnableFastChecks + WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996 + false + true + true + true + false + true + false + MultiThreadedDebugDLL + + + Console + true + libpng16.lib + $(OutDir) + + + Executing PNG test program + "$(OutDir)pngtest.exe" ..\..\..\pngtest.png "$(IntDir)pngout.png" + $(IntDir)pngout.png + ..\..\..\pngtest.png;$(OutDir)pngtest.exe + + + + + NotUsing + Level4 + false + ProgramDatabase + Disabled + EnableFastChecks + MultiThreadedDebug + WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996 + false + true + true + true + false + true + false + + + Console + true + libpng16.lib;zlib.lib + $(OutDir) + + + Executing PNG test program + "$(OutDir)pngtest.exe" ..\..\..\pngtest.png "$(IntDir)pngout.png" + $(IntDir)pngout.png + ..\..\..\pngtest.png;$(OutDir)pngtest.exe + + + + + Level4 + NotUsing + ProgramDatabase + Full + false + true + WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996 + false + true + true + false + true + true + false + + + Console + true + true + true + UseLinkTimeCodeGeneration + libpng16.lib + $(OutDir) + + + Executing PNG test program + "$(OutDir)pngtest.exe" ..\..\..\pngtest.png "$(IntDir)pngout.png" + $(IntDir)pngout.png + ..\..\..\pngtest.png;$(OutDir)pngtest.exe + + + + + Level4 + NotUsing + ProgramDatabase + Full + MultiThreaded + false + true + WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996 + false + true + true + false + true + true + false + + + Console + true + true + true + libpng16.lib;zlib.lib + UseLinkTimeCodeGeneration + $(OutDir) + + + Executing PNG test program + $(OutDir)pngtest.exe ..\..\..\pngtest.png $(IntDir)pngout.png + "$(OutDir)pngtest.exe" ..\..\..\pngtest.png "$(IntDir)pngout.png" + $(IntDir)pngout.png + ..\..\..\pngtest.png;$(OutDir)pngtest.exe + + + + + + + + + diff --git a/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngunknown/pngunknown.vcxproj b/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngunknown/pngunknown.vcxproj new file mode 100644 index 000000000..a30cc7a21 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngunknown/pngunknown.vcxproj @@ -0,0 +1,219 @@ + + + + + Debug Library + Win32 + + + Debug + Win32 + + + Release Library + Win32 + + + Release + Win32 + + + + {C5D3156C-8C8C-4936-B35F-2B829BA36FEC} + Win32Proj + pngunknown + + + + + Application + Unicode + + + Application + Unicode + + + Application + Unicode + + + Application + Unicode + + + + + + + + + + + + + + + + + + + false + + + + false + + + + false + + + + false + + + + + NotUsing + Level4 + false + ProgramDatabase + Disabled + EnableFastChecks + WIN32;_DEBUG;_CONSOLE;PNG_USE_DLL;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + true + false + true + false + MultiThreadedDebugDLL + + + Console + true + libpng16.lib + $(OutDir) + + + Executing PNG validation program + "$(OutDir)pngunknown.exe" --strict --default --touch "$(IntDir)pngunknown.out" ../../../pngtest.png + $(IntDir)pngunknown.out + $(OutDir)pngunknown.exe + + + + + NotUsing + Level4 + false + ProgramDatabase + Disabled + EnableFastChecks + MultiThreadedDebug + WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + true + false + true + false + + + Console + true + libpng16.lib;zlib.lib + $(OutDir) + + + Executing PNG validation program + "$(OutDir)pngunknown.exe" --strict --default --touch "$(IntDir)pngunknown.out" ../../../pngtest.png + $(IntDir)pngunknown.out + $(OutDir)pngunknown.exe + + + + + Level4 + NotUsing + ProgramDatabase + Full + false + true + WIN32;NDEBUG;_CONSOLE;PNG_USE_DLL;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + false + true + true + false + + + Console + true + true + true + libpng16.lib + $(OutDir) + UseLinkTimeCodeGeneration + + + Executing PNG validation program + "$(OutDir)pngunknown.exe" --strict --default --touch "$(IntDir)pngunknown.out" ../../../pngtest.png + $(IntDir)pngunknown.out + $(OutDir)pngunknown.exe + + + + + Level4 + NotUsing + ProgramDatabase + Full + MultiThreaded + false + true + WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + false + true + true + false + + + Console + true + true + true + libpng16.lib;zlib.lib + $(OutDir) + UseLinkTimeCodeGeneration + + + Executing PNG validation program + "$(OutDir)pngunknown.exe" --strict --default --touch "$(IntDir)pngunknown.out" ../../../pngtest.png + $(IntDir)pngunknown.out + $(OutDir)pngunknown.exe + + + + + + + + + diff --git a/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngvalid/pngvalid.vcxproj b/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngvalid/pngvalid.vcxproj new file mode 100644 index 000000000..07cf24119 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/vstudio/pngvalid/pngvalid.vcxproj @@ -0,0 +1,219 @@ + + + + + Debug Library + Win32 + + + Debug + Win32 + + + Release Library + Win32 + + + Release + Win32 + + + + {9B36B6FE-7FC0-434F-A71F-BBEF8099F1D8} + Win32Proj + pngvalid + + + + + Application + Unicode + + + Application + Unicode + + + Application + Unicode + + + Application + Unicode + + + + + + + + + + + + + + + + + + + false + + + + false + + + + false + + + + false + + + + + NotUsing + Level4 + false + ProgramDatabase + Disabled + EnableFastChecks + WIN32;_DEBUG;_CONSOLE;PNG_USE_DLL;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + true + false + true + false + MultiThreadedDebugDLL + + + Console + true + libpng16.lib;zlib.lib + $(OutDir) + + + Executing PNG validation program + "$(OutDir)pngvalid.exe" --touch "$(IntDir)pngvalid.out" + $(IntDir)pngvalid.out + $(OutDir)pngvalid.exe + + + + + NotUsing + Level4 + false + ProgramDatabase + Disabled + EnableFastChecks + MultiThreadedDebug + WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + true + false + true + false + + + Console + true + libpng16.lib;zlib.lib + $(OutDir) + + + Executing PNG validation program + "$(OutDir)pngvalid.exe" --touch "$(IntDir)pngvalid.out" + $(IntDir)pngvalid.out + $(OutDir)pngvalid.exe + + + + + Level4 + NotUsing + ProgramDatabase + Full + false + true + WIN32;NDEBUG;_CONSOLE;PNG_USE_DLL;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + false + true + true + false + + + Console + true + true + true + libpng16.lib;zlib.lib + $(OutDir) + UseLinkTimeCodeGeneration + + + Executing PNG validation program + "$(OutDir)pngvalid.exe" --touch "$(IntDir)pngvalid.out" + $(IntDir)pngvalid.out + $(OutDir)pngvalid.exe + + + + + Level4 + NotUsing + ProgramDatabase + Full + MultiThreaded + false + true + WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + $(ZLibSrcDir);..\..\..\scripts;%(AdditionalIncludeDirectories) + 4996;4127 + false + true + true + false + true + true + false + + + Console + true + true + true + libpng16.lib;zlib.lib + $(OutDir) + UseLinkTimeCodeGeneration + + + Executing PNG validation program + "$(OutDir)pngvalid.exe" --touch "$(IntDir)pngvalid.out" + $(IntDir)pngvalid.out + $(OutDir)pngvalid.exe + + + + + + + + + diff --git a/src/SDL2/external/libpng-1.6.2/projects/vstudio/readme.txt b/src/SDL2/external/libpng-1.6.2/projects/vstudio/readme.txt new file mode 100644 index 000000000..1af61c9a4 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/vstudio/readme.txt @@ -0,0 +1,65 @@ + +VisualStudio instructions + +libpng version 1.6.2 - April 25, 2013 + +Copyright (c) 1998-2010 Glenn Randers-Pehrson + +This code is released under the libpng license. +For conditions of distribution and use, see the disclaimer +and license in png.h + +This directory contains support for building libpng under MicroSoft +VisualStudio 2010. It may also work under later versions of VisualStudio. +You should be familiar with VisualStudio before using this directory. + +Initial preparations +==================== +You must enter some information in zlib.props before attempting to build +with this 'solution'. Please read and edit zlib.props first. You will +probably not be familiar with the contents of zlib.props - do not worry, +it is mostly harmless. + +This is all you need to do to build the 'release' and 'release library' +configurations. + +Debugging +========= +The release configurations default to /Ox optimization. Full debugging +information is produced (in the .pdb), but if you encounter a problem the +optimization may make it difficult to debug. Simply rebuild with a lower +optimization level (e.g. /Od.) + +Linking your application +======================== +Normally you should link against the 'release' configuration. This builds a +DLL for libpng with the default runtime options used by Visual Studio 2010. +In particular the runtime library is the "MultiThreaded DLL" version. +If you use Visual Studio defaults to build your application you will have no +problems. + +If you don't use the Visual Studio defaults your application must still be built +with the default runtime option (/MD). If, for some reason, it is not then your +application will crash inside libpng16.dll as soon as libpng tries to read +from a file handle you pass in. + +If you do not want to use the DLL, for example for a very small application, +the 'release library' configuration may be more appropriate. This is built +with a non-standard runtime library - the "MultiThreaded" version. When you +build your application it must be compiled with this option (/MT), otherwise +it will not build (if you are lucky) or crash (if you are not.) + +Stop reading here +================= +You have enough information to build a working application. + +Debug versions have limited support +=================================== +This solution includes limited support for debug versions of libpng. You +do not need these unless your own solution itself uses debug builds (it is +far more effective to debug on the release builds, there is no point building +a special debug build unless you have heap corruption problems that you can't +track down.) + +The debug build of libpng is minimally supported. Support for debug builds of +zlib is also minimal. You really don't want to do this. diff --git a/src/SDL2/external/libpng-1.6.2/projects/vstudio/vstudio.sln b/src/SDL2/external/libpng-1.6.2/projects/vstudio/vstudio.sln new file mode 100644 index 000000000..af0b1bab5 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/vstudio/vstudio.sln @@ -0,0 +1,109 @@ +Microsoft Visual Studio Solution File, Format Version 11.00 +# Visual Studio 2010 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlib", "zlib\zlib.vcxproj", "{60F89955-91C6-3A36-8000-13C592FEC2DF}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "pnglibconf", "pnglibconf\pnglibconf.vcxproj", "{EB33566E-DA7F-4D28-9077-88C0B7C77E35}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libpng", "libpng\libpng.vcxproj", "{D6973076-9317-4EF2-A0B8-B7A18AC0713E}" + ProjectSection(ProjectDependencies) = postProject + {60F89955-91C6-3A36-8000-13C592FEC2DF} = {60F89955-91C6-3A36-8000-13C592FEC2DF} + {EB33566E-DA7F-4D28-9077-88C0B7C77E35} = {EB33566E-DA7F-4D28-9077-88C0B7C77E35} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "pngtest", "pngtest\pngtest.vcxproj", "{228BA965-50D5-42B2-8BCF-AFCC227E3C1D}" + ProjectSection(ProjectDependencies) = postProject + {60F89955-91C6-3A36-8000-13C592FEC2DF} = {60F89955-91C6-3A36-8000-13C592FEC2DF} + {EB33566E-DA7F-4D28-9077-88C0B7C77E35} = {EB33566E-DA7F-4D28-9077-88C0B7C77E35} + {D6973076-9317-4EF2-A0B8-B7A18AC0713E} = {D6973076-9317-4EF2-A0B8-B7A18AC0713E} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "pngvalid", "pngvalid\pngvalid.vcxproj", "{9B36B6FE-7FC0-434F-A71F-BBEF8099F1D8}" + ProjectSection(ProjectDependencies) = postProject + {60F89955-91C6-3A36-8000-13C592FEC2DF} = {60F89955-91C6-3A36-8000-13C592FEC2DF} + {EB33566E-DA7F-4D28-9077-88C0B7C77E35} = {EB33566E-DA7F-4D28-9077-88C0B7C77E35} + {D6973076-9317-4EF2-A0B8-B7A18AC0713E} = {D6973076-9317-4EF2-A0B8-B7A18AC0713E} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "pngstest", "pngstest\pngstest.vcxproj", "{277AC57F-313B-4D06-B119-A3CDB672D2FF}" + ProjectSection(ProjectDependencies) = postProject + {60F89955-91C6-3A36-8000-13C592FEC2DF} = {60F89955-91C6-3A36-8000-13C592FEC2DF} + {EB33566E-DA7F-4D28-9077-88C0B7C77E35} = {EB33566E-DA7F-4D28-9077-88C0B7C77E35} + {D6973076-9317-4EF2-A0B8-B7A18AC0713E} = {D6973076-9317-4EF2-A0B8-B7A18AC0713E} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "pngunknown", "pngunknown\pngunknown.vcxproj", "{C5D3156C-8C8C-4936-B35F-2B829BA36FEC}" + ProjectSection(ProjectDependencies) = postProject + {60F89955-91C6-3A36-8000-13C592FEC2DF} = {60F89955-91C6-3A36-8000-13C592FEC2DF} + {EB33566E-DA7F-4D28-9077-88C0B7C77E35} = {EB33566E-DA7F-4D28-9077-88C0B7C77E35} + {D6973076-9317-4EF2-A0B8-B7A18AC0713E} = {D6973076-9317-4EF2-A0B8-B7A18AC0713E} + EndProjectSection +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug Library|Win32 = Debug Library|Win32 + Debug|Win32 = Debug|Win32 + Release Library|Win32 = Release Library|Win32 + Release|Win32 = Release|Win32 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {D6973076-9317-4EF2-A0B8-B7A18AC0713E}.Debug Library|Win32.ActiveCfg = Debug Library|Win32 + {D6973076-9317-4EF2-A0B8-B7A18AC0713E}.Debug Library|Win32.Build.0 = Debug Library|Win32 + {D6973076-9317-4EF2-A0B8-B7A18AC0713E}.Debug|Win32.ActiveCfg = Debug|Win32 + {D6973076-9317-4EF2-A0B8-B7A18AC0713E}.Debug|Win32.Build.0 = Debug|Win32 + {D6973076-9317-4EF2-A0B8-B7A18AC0713E}.Release Library|Win32.ActiveCfg = Release Library|Win32 + {D6973076-9317-4EF2-A0B8-B7A18AC0713E}.Release Library|Win32.Build.0 = Release Library|Win32 + {D6973076-9317-4EF2-A0B8-B7A18AC0713E}.Release|Win32.ActiveCfg = Release|Win32 + {D6973076-9317-4EF2-A0B8-B7A18AC0713E}.Release|Win32.Build.0 = Release|Win32 + {228BA965-50D5-42B2-8BCF-AFCC227E3C1D}.Debug Library|Win32.ActiveCfg = Debug Library|Win32 + {228BA965-50D5-42B2-8BCF-AFCC227E3C1D}.Debug Library|Win32.Build.0 = Debug Library|Win32 + {228BA965-50D5-42B2-8BCF-AFCC227E3C1D}.Debug|Win32.ActiveCfg = Debug|Win32 + {228BA965-50D5-42B2-8BCF-AFCC227E3C1D}.Debug|Win32.Build.0 = Debug|Win32 + {228BA965-50D5-42B2-8BCF-AFCC227E3C1D}.Release Library|Win32.ActiveCfg = Release Library|Win32 + {228BA965-50D5-42B2-8BCF-AFCC227E3C1D}.Release Library|Win32.Build.0 = Release Library|Win32 + {228BA965-50D5-42B2-8BCF-AFCC227E3C1D}.Release|Win32.ActiveCfg = Release|Win32 + {228BA965-50D5-42B2-8BCF-AFCC227E3C1D}.Release|Win32.Build.0 = Release|Win32 + {60F89955-91C6-3A36-8000-13C592FEC2DF}.Debug Library|Win32.ActiveCfg = Debug Library|Win32 + {60F89955-91C6-3A36-8000-13C592FEC2DF}.Debug Library|Win32.Build.0 = Debug Library|Win32 + {60F89955-91C6-3A36-8000-13C592FEC2DF}.Debug|Win32.ActiveCfg = Debug|Win32 + {60F89955-91C6-3A36-8000-13C592FEC2DF}.Debug|Win32.Build.0 = Debug|Win32 + {60F89955-91C6-3A36-8000-13C592FEC2DF}.Release Library|Win32.ActiveCfg = Release Library|Win32 + {60F89955-91C6-3A36-8000-13C592FEC2DF}.Release Library|Win32.Build.0 = Release Library|Win32 + {60F89955-91C6-3A36-8000-13C592FEC2DF}.Release|Win32.ActiveCfg = Release|Win32 + {60F89955-91C6-3A36-8000-13C592FEC2DF}.Release|Win32.Build.0 = Release|Win32 + {9B36B6FE-7FC0-434F-A71F-BBEF8099F1D8}.Debug Library|Win32.ActiveCfg = Debug Library|Win32 + {9B36B6FE-7FC0-434F-A71F-BBEF8099F1D8}.Debug Library|Win32.Build.0 = Debug Library|Win32 + {9B36B6FE-7FC0-434F-A71F-BBEF8099F1D8}.Debug|Win32.ActiveCfg = Debug|Win32 + {9B36B6FE-7FC0-434F-A71F-BBEF8099F1D8}.Debug|Win32.Build.0 = Debug|Win32 + {9B36B6FE-7FC0-434F-A71F-BBEF8099F1D8}.Release Library|Win32.ActiveCfg = Release Library|Win32 + {9B36B6FE-7FC0-434F-A71F-BBEF8099F1D8}.Release Library|Win32.Build.0 = Release Library|Win32 + {9B36B6FE-7FC0-434F-A71F-BBEF8099F1D8}.Release|Win32.ActiveCfg = Release|Win32 + {9B36B6FE-7FC0-434F-A71F-BBEF8099F1D8}.Release|Win32.Build.0 = Release|Win32 + {EB33566E-DA7F-4D28-9077-88C0B7C77E35}.Debug Library|Win32.ActiveCfg = Release|Win32 + {EB33566E-DA7F-4D28-9077-88C0B7C77E35}.Debug Library|Win32.Build.0 = Release|Win32 + {EB33566E-DA7F-4D28-9077-88C0B7C77E35}.Debug|Win32.ActiveCfg = Release|Win32 + {EB33566E-DA7F-4D28-9077-88C0B7C77E35}.Debug|Win32.Build.0 = Release|Win32 + {EB33566E-DA7F-4D28-9077-88C0B7C77E35}.Release Library|Win32.ActiveCfg = Release|Win32 + {EB33566E-DA7F-4D28-9077-88C0B7C77E35}.Release Library|Win32.Build.0 = Release|Win32 + {EB33566E-DA7F-4D28-9077-88C0B7C77E35}.Release|Win32.ActiveCfg = Release|Win32 + {EB33566E-DA7F-4D28-9077-88C0B7C77E35}.Release|Win32.Build.0 = Release|Win32 + {277AC57F-313B-4D06-B119-A3CDB672D2FF}.Debug Library|Win32.ActiveCfg = Debug Library|Win32 + {277AC57F-313B-4D06-B119-A3CDB672D2FF}.Debug Library|Win32.Build.0 = Debug Library|Win32 + {277AC57F-313B-4D06-B119-A3CDB672D2FF}.Debug|Win32.ActiveCfg = Debug|Win32 + {277AC57F-313B-4D06-B119-A3CDB672D2FF}.Debug|Win32.Build.0 = Debug|Win32 + {277AC57F-313B-4D06-B119-A3CDB672D2FF}.Release Library|Win32.ActiveCfg = Release Library|Win32 + {277AC57F-313B-4D06-B119-A3CDB672D2FF}.Release Library|Win32.Build.0 = Release Library|Win32 + {277AC57F-313B-4D06-B119-A3CDB672D2FF}.Release|Win32.ActiveCfg = Release|Win32 + {277AC57F-313B-4D06-B119-A3CDB672D2FF}.Release|Win32.Build.0 = Release|Win32 + {C5D3156C-8C8C-4936-B35F-2B829BA36FEC}.Debug Library|Win32.ActiveCfg = Debug Library|Win32 + {C5D3156C-8C8C-4936-B35F-2B829BA36FEC}.Debug Library|Win32.Build.0 = Debug Library|Win32 + {C5D3156C-8C8C-4936-B35F-2B829BA36FEC}.Debug|Win32.ActiveCfg = Debug|Win32 + {C5D3156C-8C8C-4936-B35F-2B829BA36FEC}.Debug|Win32.Build.0 = Debug|Win32 + {C5D3156C-8C8C-4936-B35F-2B829BA36FEC}.Release Library|Win32.ActiveCfg = Release Library|Win32 + {C5D3156C-8C8C-4936-B35F-2B829BA36FEC}.Release Library|Win32.Build.0 = Release Library|Win32 + {C5D3156C-8C8C-4936-B35F-2B829BA36FEC}.Release|Win32.ActiveCfg = Release|Win32 + {C5D3156C-8C8C-4936-B35F-2B829BA36FEC}.Release|Win32.Build.0 = Release|Win32 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/SDL2/external/libpng-1.6.2/projects/vstudio/zlib.props b/src/SDL2/external/libpng-1.6.2/projects/vstudio/zlib.props new file mode 100644 index 000000000..c73bf0896 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/vstudio/zlib.props @@ -0,0 +1,45 @@ + + + + + + + ..\..\..\..\zlib-1.2.5 + + + true + + diff --git a/src/SDL2/external/libpng-1.6.2/projects/vstudio/zlib/zlib.vcxproj b/src/SDL2/external/libpng-1.6.2/projects/vstudio/zlib/zlib.vcxproj new file mode 100644 index 000000000..6e5b94a61 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/projects/vstudio/zlib/zlib.vcxproj @@ -0,0 +1,169 @@ + + + + + Debug Library + Win32 + + + Debug + Win32 + + + Release Library + Win32 + + + Release + Win32 + + + + + + + + + + + + + + + + + {60F89955-91C6-3A36-8000-13C592FEC2DF} + Win32Proj + zlib + + + + + StaticLibrary + + + StaticLibrary + + + StaticLibrary + + + StaticLibrary + + + StaticLibrary + + + + + + + + + + + + + + + + + + + true + + + true + + + true + + + true + + + true + + + + WIN32;_DEBUG;_WINDOWS;Z_SOLO;%(PreprocessorDefinitions) + MultiThreadedDebug + TurnOffAllWarnings + ProgramDatabase + Disabled + true + true + + + MachineX86 + true + Windows + + + + + WIN32;_DEBUG;_WINDOWS;Z_SOLO;%(PreprocessorDefinitions) + TurnOffAllWarnings + ProgramDatabase + Disabled + true + true + MultiThreadedDebugDLL + + + MachineX86 + true + Windows + + + + + Level3 + ProgramDatabase + Full + true + true + false + true + true + true + MultiThreaded + WIN32;NDEBUG;_WINDOWS;Z_SOLO;%(PreprocessorDefinitions) + + + MachineX86 + true + Windows + + + true + + + + + Level3 + ProgramDatabase + Full + true + true + false + true + true + true + WIN32;NDEBUG;_WINDOWS;Z_SOLO;%(PreprocessorDefinitions) + + + MachineX86 + true + Windows + true + true + + + true + + + + + + diff --git a/src/SDL2/external/libpng-1.6.2/scripts/README.txt b/src/SDL2/external/libpng-1.6.2/scripts/README.txt new file mode 100644 index 000000000..6f5f062c4 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/README.txt @@ -0,0 +1,86 @@ + +Makefiles for libpng version 1.6.2 - April 25, 2013 + +pnglibconf.h.prebuilt => Stores configuration settings + makefile.linux => Linux/ELF makefile + (gcc, creates libpng16.so.16.1.6.2) + makefile.gcc => Generic makefile (gcc, creates static libpng.a) + makefile.knr => Archaic UNIX Makefile that converts files with + ansi2knr (Requires ansi2knr.c from + ftp://ftp.cs.wisc.edu/ghost) + makefile.acorn => Acorn makefile + makefile.aix => AIX/gcc makefile + makefile.amiga => Amiga makefile + makefile.atari => Atari makefile + makefile.bc32 => 32-bit Borland C++ (all modules compiled in C mode) + makefile.beos => beos makefile + makefile.bor => Borland makefile (uses bcc) + makefile.cegcc => minge32ce for Windows CE makefile + makefile.darwin => Darwin makefile, can use on MacosX + makefile.dec => DEC Alpha UNIX makefile + makefile.dj2 => DJGPP 2 makefile + makefile.elf => Linux/ELF makefile symbol versioning, + (gcc, creates libpng16.so.16.1.6.2) + makefile.freebsd => FreeBSD makefile + makefile.gcc => Generic gcc makefile + makefile.hpgcc => HPUX makefile using gcc + makefile.hpux => HPUX (10.20 and 11.00) makefile + makefile.hp64 => HPUX (10.20 and 11.00) makefile, 64-bit + makefile.ibmc => IBM C/C++ version 3.x for Win32 and OS/2 (static) + makefile.intel => Intel C/C++ version 4.0 and later + makefile.mips => MIPS makefile + makefile.msc => Microsoft C makefile + makefile.netbsd => NetBSD/cc makefile, makes libpng.so. + makefile.openbsd => OpenBSD makefile + makefile.os2 => OS/2 Makefile (gcc and emx, requires libpng.def) + makefile.sco => For SCO OSr5 ELF and Unixware 7 with Native cc + makefile.sggcc => Silicon Graphics (gcc, + creates libpng16.so.16.1.6.2) + makefile.sgi => Silicon Graphics IRIX makefile (cc, creates static lib) + makefile.solaris => Solaris 2.X makefile (gcc, + creates libpng16.so.16.1.6.2) + makefile.so9 => Solaris 9 makefile (gcc, + creates libpng16.so.16.1.6.2) + makefile.std => Generic UNIX makefile (cc, creates static libpng.a) + makefile.sunos => Sun makefile + makefile.32sunu => Sun Ultra 32-bit makefile + makefile.64sunu => Sun Ultra 64-bit makefile + makefile.tc3 => Turbo C 3.0 makefile + makefile.vcwin32 => makefile for Microsoft Visual C++ 4.0 and later + makevms.com => VMS build script + smakefile.ppc => AMIGA smakefile for SAS C V6.58/7.00 PPC compiler + (Requires SCOPTIONS, copied from scripts/SCOPTIONS.ppc) + +Other supporting scripts: + README.txt => This file + descrip.mms => VMS makefile for MMS or MMK + libpng-config-body.in => used by several makefiles to create libpng-config + libpng-config-head.in => used by several makefiles to create libpng-config + libpng.pc.in => Used by several makefiles to create libpng.pc + pngwin.rc => Used by the visualc71 project. + pngwin.def => Used by makefile.os2 + pngwin.dfn => Used to maintain pngwin.def + SCOPTIONS.ppc => Used with smakefile.ppc + + checksym.awk => Used for maintaining pnglibconf.h + def.dfn => Used for maintaining pnglibconf.h + options.awk => Used for maintaining pnglibconf.h + pnglibconf.dfa => Used for maintaining pnglibconf.h + pnglibconf.mak => Used for maintaining pnglibconf.h + sym.dfn => Used for symbol versioning + symbols.def => Used for symbol versioning + symbols.dfn => Used for symbol versioning + vers.dfn => Used for symbol versioning + + libtool.m4 => Used by autoconf tools + ltoptions.m4 => Used by autoconf tools + ltsugar.m4 => Used by autoconf tools + ltversion.m4 => Used by autoconf tools + lt~obsolete.m4 => Used by autoconf tools + + intprefix.dfn => Used by autoconf tools + macro.lst => Used by autoconf tools + prefix.dfn => Used by autoconf tools + + +Further information can be found in comments in the individual makefiles. diff --git a/src/SDL2/external/libpng-1.6.2/scripts/SCOPTIONS.ppc b/src/SDL2/external/libpng-1.6.2/scripts/SCOPTIONS.ppc new file mode 100644 index 000000000..2c3503e9e --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/SCOPTIONS.ppc @@ -0,0 +1,7 @@ +OPTIMIZE +OPTPEEP +OPTTIME +OPTSCHED +AUTOREGISTER +PARMS=REGISTERS +INCLUDEDIR=hlp:ppc/include diff --git a/src/SDL2/external/libpng-1.6.2/scripts/checksym.awk b/src/SDL2/external/libpng-1.6.2/scripts/checksym.awk new file mode 100755 index 000000000..fe3af55e0 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/checksym.awk @@ -0,0 +1,173 @@ +#!/bin/awk -f +# Check a list of symbols against the master definition +# (official) list. Arguments: +# +# awk -f checksym.awk official-def list-to-check +# +# Output is a file in the current directory called 'symbols.new', +# the value of the awk variable "of" (which can be changed on the +# command line if required.) stdout holds error messages. Error +# code indicates success or failure. +# +# NOTE: this is a pure, old fashioned, awk script. It will +# work with any awk + +BEGIN{ + err=0 + master="" # master file + official[1] = "" # defined symbols from master file + symbol[1] = "" # defined symbols from png.h + removed[1] = "" # removed symbols from png.h + lasto = 0 # last ordinal value from png.h + mastero = 0 # highest ordinal in master file + symbolo = 0 # highest ordinal in png.h + missing = "error"# log an error on missing symbols + of="symbols.new" # default to a fixed name +} + +# Read existing definitions from the master file (the first +# file on the command line.) This must be a def file and it +# has definition lines (others are ignored) of the form: +# +# symbol @ordinal +# +master == "" { + master = FILENAME +} +FILENAME==master && NF==2 && $2~/^@/ && $1!~/^;/ { + o=0+substr($2,2) + if (o > 0) { + if (official[o] == "") { + official[o] = $1 + if (o > mastero) mastero = o + next + } else + print master ": duplicated symbol:", official[o] ":", $0 + } else + print master ": bad export line format:", $0 + err = 1 +} +FILENAME==master && $1==";missing" && NF==2{ + # This allows the master file to control how missing symbols + # are handled; symbols that aren't in either the master or + # the new file. Valid values are 'ignore', 'warning' and + # 'error' + missing = $2 +} +FILENAME==master { + next +} + +# Read new definitions, these are free form but the lines must +# just be symbol definitions. Lines will be commented out for +# 'removed' symbols, introduced in png.h using PNG_REMOVED rather +# than PNG_EXPORT. Use symbols.dfn or pngwin.dfn to generate the +# input file. +# +# symbol @ordinal # two fields, exported symbol +# ; symbol @ordinal # three fields, removed symbol +# ; @ordinal # two fields, the last ordinal +NF==2 && $1 == ";" && $2 ~ /^@[1-9][0-9]*$/ { # last ordinal + o=0+substr($2,2) + if (lasto == 0 || lasto == o) + lasto=o + else { + print "png.h: duplicated last ordinal:", lasto, o + err = 1 + } + next +} +NF==3 && $1 == ";" && $3 ~ /^@[1-9][0-9]*$/ { # removed symbol + o=0+substr($3,2) + if (removed[o] == "" || removed[o] == $2) { + removed[o] = $2 + if (o > symbolo) symbolo = o + } else { + print "png.h: duplicated removed symbol", o ": '" removed[o] "' != '" $2 "'" + err = 1 + } + next +} +NF==2 && $2 ~ /^@[1-9][0-9]*$/ { # exported symbol + o=0+substr($2,2) + if (symbol[o] == "" || symbol[o] == $1) { + symbol[o] = $1 + if (o > symbolo) symbolo = o + } else { + print "png.h: duplicated symbol", o ": '" symbol[o] "' != '" $1 "'" + err = 1 + } +} +{ + next # skip all other lines +} + +# At the end check for symbols marked as both duplicated and removed +END{ + if (symbolo > lasto) { + print "highest symbol ordinal in png.h,", symbolo ", exceeds last ordinal from png.h", lasto + err = 1 + } + if (mastero > lasto) { + print "highest symbol ordinal in", master ",", mastero ", exceeds last ordinal from png.h", lasto + err = 1 + } + unexported=0 + # Add a standard header to symbols.new: + print ";Version INSERT-VERSION-HERE" >of + print ";--------------------------------------------------------------" >of + print "; LIBPNG symbol list as a Win32 DEF file" >of + print "; Contains all the symbols that can be exported from libpng" >of + print ";--------------------------------------------------------------" >of + print "LIBRARY" >of + print "" >of + print "EXPORTS" >of + + for (o=1; o<=lasto; ++o) { + if (symbol[o] == "" && removed[o] == "") { + if (unexported == 0) unexported = o + if (official[o] == "") { + # missing in export list too, so ok + if (o < lasto) continue + } + } + if (unexported != 0) { + # Symbols in the .def but not in the new file are errors, but + # the 'unexported' symbols aren't in either. By default this + # is an error too (see the setting of 'missing' at the start), + # but this can be reset on the command line or by stuff in the + # file - see the comments above. + if (missing != "ignore") { + if (o-1 > unexported) + print "png.h:", missing ": missing symbols:", unexported "-" o-1 + else + print "png.h:", missing ": missing symbol:", unexported + if (missing != "warning") + err = 1 + } + unexported = 0 + } + if (symbol[o] != "" && removed[o] != "") { + print "png.h: symbol", o, "both exported as '" symbol[o] "' and removed as '" removed[o] "'" + err = 1 + } else if (symbol[o] != official[o]) { + # either the symbol is missing somewhere or it changed + err = 1 + if (symbol[o] == "") + print "png.h: symbol", o, "is exported as '" official[o] "' in", master + else if (official[o] == "") + print "png.h: exported symbol", o, "'" symbol[o] "' not present in", master + else + print "png.h: exported symbol", o, "'" symbol[o] "' exists as '" official[o] "' in", master + } + + # Finally generate symbols.new + if (symbol[o] != "") + print " " symbol[o], "@" o > of + } + + if (err != 0) { + print "*** A new list is in", of, "***" + exit 1 + } +} diff --git a/src/SDL2/external/libpng-1.6.2/scripts/def.dfn b/src/SDL2/external/libpng-1.6.2/scripts/def.dfn new file mode 100644 index 000000000..1415c2c4e --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/def.dfn @@ -0,0 +1,29 @@ +/* def.dfn - define format of libpng.def + * + * Last changed in libpng version 1.5.7 [December 15, 2011] + * Copyright (c) 2010-2011 Glenn Randers-Pehrson + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +/* Write the export file header: */ +PNG_DFN ";--------------------------------------------------------------" +PNG_DFN "; LIBPNG module definition file for OS/2" +PNG_DFN ";--------------------------------------------------------------" +PNG_DFN "" +PNG_DFN "; If you give the library an explicit name one or other files" +PNG_DFN "; may need modifying to support the new name on one or more" +PNG_DFN "; systems." +PNG_DFN "LIBRARY" +PNG_DFN "OS2 DESCRIPTION "PNG image compression library"" +PNG_DFN "OS2 CODE PRELOAD MOVEABLE DISCARDABLE" +PNG_DFN "" +PNG_DFN "EXPORTS" +PNG_DFN ";Version 1.6.2" + +#define PNG_EXPORTA(ordinal, type, name, args, attributes)\ + PNG_DFN "@" SYMBOL_PREFIX "@@" name "@" + +#include "../png.h" diff --git a/src/SDL2/external/libpng-1.6.2/scripts/descrip.mms b/src/SDL2/external/libpng-1.6.2/scripts/descrip.mms new file mode 100644 index 000000000..eb9a80713 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/descrip.mms @@ -0,0 +1,52 @@ + +cc_defs = /inc=$(ZLIBSRC) +c_deb = + +.ifdef __DECC__ +pref = /prefix=all +.endif + + + +OBJS = png.obj, pngset.obj, pngget.obj, pngrutil.obj, pngtrans.obj,\ + pngwutil.obj, pngread.obj, pngmem.obj, pngwrite.obj, pngrtran.obj,\ + pngwtran.obj, pngrio.obj, pngwio.obj, pngerror.obj, pngpread.obj + + +CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF) + +all : pngtest.exe libpng.olb + @ write sys$output " pngtest available" + +libpng.olb : libpng.olb($(OBJS)) + @ write sys$output " Libpng available" + + +pngtest.exe : pngtest.obj libpng.olb + link pngtest,libpng.olb/lib,$(ZLIBSRC)libz.olb/lib + +test : pngtest.exe + run pngtest + +clean : + delete *.obj;*,*.exe; + + +# Other dependencies. +png.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngpread.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngset.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngget.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngread.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngrtran.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngrutil.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngerror.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngmem.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngrio.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngwio.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngtrans.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngwrite.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngwtran.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h +pngwutil.obj : png.h, pngconf.h, pnglibconf.h, pngpriv.h, pngstruct.h, pnginfo.h, pngdebug.h + +pngtest.obj : png.h, pngconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/dfn.awk b/src/SDL2/external/libpng-1.6.2/scripts/dfn.awk new file mode 100644 index 000000000..89b92d5d9 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/dfn.awk @@ -0,0 +1,203 @@ +#!/bin/awk -f +# scripts/dfn.awk - process a .dfn file +# +# last changed in libpng version 1.5.14 - February 4, 2013 +# +# Copyright (c) 2013-2013 Glenn Randers-Pehrson +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# The output of this script is written to the file given by +# the variable 'out', which should be set on the command line. +# Error messages are printed to stdout and if any are printed +# the script will exit with error code 1. + +BEGIN{ + out="/dev/null" # as a flag + out_count=0 # count of output lines + err=0 # set if an error occured + sort=0 # sort the output + array[""]="" +} + +# The output file must be specified before any input: +NR==1 && out == "/dev/null" { + print "out=output.file must be given on the command line" + # but continue without setting the error code, this allows the + # script to be checked easily +} + +# Output can be sorted; two lines are recognized +$1 == "PNG_DFN_START_SORT"{ + sort=0+$2 + next +} + +$1 ~ /^PNG_DFN_END_SORT/{ + # Do a very simple, slow, sort; notice that blank lines won't be + # output by this + for (entry in array) { + while (array[entry] != "") { + key = entry + value = array[key] + array[key] = "" + + for (alt in array) { + if (array[alt] != "" && alt < key) { + array[key] = value + value = array[alt] + key = alt + array[alt] = "" + } + } + + print value >out + } + } + sort=0 + next +} + +/^[^"]*PNG_DFN *".*"[^"]*$/{ + # A definition line, apparently correctly formated, extract the + # definition then replace any doubled "" that remain with a single + # double quote. Notice that the original doubled double quotes + # may have been split by tokenization + # + # Sometimes GCC splits the PNG_DFN lines, we know this has happened + # if the quotes aren't closed and must read another line. In this + # case it is essential to reject lines that start '#' because those + # are introduced #line directives. + orig=$0 + line=$0 + lineno=FNR + if (lineno == "") lineno=NR + + if (sub(/^[^"]*PNG_DFN *"/,"",line) != 1) { + print "line", lineno ": processing failed:" + print orig + err=1 + next + } else { + ++out_count + } + + # Now examine quotes within the value: + # + # @" - delete this and any following spaces + # "@ - delete this and any preceding spaces + # @' - replace this by a double quote + # + # This allows macro substitution by the C compiler thus: + # + # #define first_name John + # #define last_name Smith + # + # PNG_DFN"#define name @'@" first_name "@ @" last_name "@@'" + # + # Might get C preprocessed to: + # + # PNG_DFN "#define foo @'@" John "@ @" Smith "@@'" + # + # Which this script reduces to: + # + # #define name "John Smith" + # + while (1) { + # While there is an @" remove it and the next "@ + if (line ~ /@"/) { + if (line ~ /@".*"@/) { + # Do this special case first to avoid swallowing extra spaces + # before or after the @ stuff: + if (!sub(/@" *"@/, "", line)) { + # Ok, do it in pieces - there has to be a non-space between the + # two. NOTE: really weird things happen if a leading @" is + # lost - the code will error out below (I believe). + if (!sub(/@" */, "", line) || !sub(/ *"@/, "", line)) { + print "line", lineno, ": internal error:", orig + exit 1 + } + } + } + + # There is no matching "@. Assume a split line + else while (1) { + if (getline nextline) { + # If the line starts with '#' it is a preprocesor line directive + # from cc -E, skip it: + if (nextline !~ /^#/) { + line = line " " nextline + break + } + } else { + # This is end-of-input - probably a missig "@ on the first line: + print "line", lineno ": unbalanced @\" ... \"@ pair" + err=1 + next + } + } + + # Keep going until all the @" have gone + continue + } + + # Attempt to remove a trailing " (not preceded by '@') - if this can + # be done stop now, if not assume a split line again + if (sub(/"[^"]*$/, "", line)) + break + + # Read another line + while (1) { + if (getline nextline) { + if (nextline !~ /^#/) { + line = line " " nextline + # Go back to stripping @" "@ pairs + break + } + } else { + print "line", lineno ": unterminated PNG_DFN string" + err=1 + next + } + } + } + + # Put any needed double quotes in (at the end, because these would otherwise + # interfere with the processing above.) + gsub(/@'/,"\"", line) + + # Remove any trailing spaces (not really required, but for + # editorial consistency + sub(/ *$/, "", line) + + # Remove trailing CR + sub(/ $/, "", line) + + if (sort) { + if (split(line, parts) < sort) { + print "line", lineno ": missing sort field:", line + err=1 + } else + array[parts[sort]] = line + } + + else + print line >out + next +} + +/PNG_DFN/{ + print "line", NR, "incorrectly formated PNG_DFN line:" + print $0 + err = 1 +} + +END{ + if (out_count > 0 || err > 0) + exit err + + print "no definition lines found" + exit 1 +} diff --git a/src/SDL2/external/libpng-1.6.2/scripts/intprefix.dfn b/src/SDL2/external/libpng-1.6.2/scripts/intprefix.dfn new file mode 100644 index 000000000..790bdfee9 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/intprefix.dfn @@ -0,0 +1,19 @@ + +/* intprefix.dfn - generate an unprefixed internal symbol list + * + * Last changed in libpng version 1.6.0 [January 30, 2012] + * Copyright (c) 2012 Glenn Randers-Pehrson + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +#define PNG_INTERNAL_DATA(type, name, array)\ + PNG_DFN "@" name "@" + +#define PNG_INTERNAL_FUNCTION(type, name, args, attributes)\ + PNG_DFN "@" name "@" + +#define PNGPREFIX_H /* self generation */ +#include "../pngpriv.h" diff --git a/src/SDL2/external/libpng-1.6.2/scripts/libpng-config-body.in b/src/SDL2/external/libpng-1.6.2/scripts/libpng-config-body.in new file mode 100755 index 000000000..b466432d5 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/libpng-config-body.in @@ -0,0 +1,96 @@ + +usage() +{ + cat <='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags="_LT_TAGS"dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# `#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test $lt_write_fail = 0 && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to ." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2011 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test $[#] != 0 +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try \`$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try \`$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +_LT_COPYING +_LT_LIBTOOL_TAGS + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + _LT_PROG_REPLACE_SHELLFNS + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Go], [_LT_LANG(GO)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +m4_ifndef([AC_PROG_GO], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_GO. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ +m4_defun([AC_PROG_GO], +[AC_LANG_PUSH(Go)dnl +AC_ARG_VAR([GOC], [Go compiler command])dnl +AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl +_AC_ARG_VAR_LDFLAGS()dnl +AC_CHECK_TOOL(GOC, gccgo) +if test -z "$GOC"; then + if test -n "$ac_tool_prefix"; then + AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) + fi +fi +if test -z "$GOC"; then + AC_CHECK_PROG(GOC, gccgo, gccgo, false) +fi +])#m4_defun +])#m4_ifndef + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([AC_PROG_GO], + [LT_LANG(GO)], + [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS="$save_LDFLAGS" + ]) + + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[[012]]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES([TAG]) +# --------------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], + [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + m4_if([$1], [CXX], +[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) +# ---------------------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +# Store the results from the different compilers for each TAGNAME. +# Allow to override them for all tags through lt_cv_aix_libpath. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], + [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ + lt_aix_libpath_sed='[ + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }]' + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" + fi + ]) + aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) +fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script which will find a shell with a builtin +# printf (which we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +case "$ECHO" in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac + +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_WITH_SYSROOT +# ---------------- +AC_DEFUN([_LT_WITH_SYSROOT], +[AC_MSG_CHECKING([for sysroot]) +AC_ARG_WITH([sysroot], +[ --with-sysroot[=DIR] Search for dependent libraries within DIR + (or the compiler's sysroot if not specified).], +[], [with_sysroot=no]) + +dnl lt_sysroot will always be passed unquoted. We quote it here +dnl in case the user passed a directory name. +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + AC_MSG_RESULT([${with_sysroot}]) + AC_MSG_ERROR([The sysroot must be an absolute path.]) + ;; +esac + + AC_MSG_RESULT([${lt_sysroot:-no}]) +_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl +[dependent libraries, and in which our libraries should be installed.])]) + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" +])# _LT_ENABLE_LOCK + + +# _LT_PROG_AR +# ----------- +m4_defun([_LT_PROG_AR], +[AC_CHECK_TOOLS(AR, [ar], false) +: ${AR=ar} +: ${AR_FLAGS=cru} +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], + [lt_cv_ar_at_file=no + AC_COMPILE_IFELSE([AC_LANG_PROGRAM], + [echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + ]) + ]) + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi +_LT_DECL([], [archiver_list_spec], [1], + [How to feed a file listing to the archiver]) +])# _LT_PROG_AR + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[_LT_PROG_AR + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test x"[$]$2" = xyes; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links="nottested" +if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || + test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[[4-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[23]].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], + [Run-time system search path for libraries]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program which can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program which can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method = "file_magic"]) +_LT_DECL([], [file_magic_glob], [1], + [How to find potential files when deplibs_check_method = "file_magic"]) +_LT_DECL([], [want_nocaseglob], [1], + [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi]) +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + +# _LT_CHECK_SHAREDLIB_FROM_LINKLIB +# -------------------------------- +# how to determine the name of the shared library +# associated with a specific link library. +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +m4_require([_LT_DECL_DLLTOOL]) +AC_CACHE_CHECK([how to associate runtime and link libraries], +lt_cv_sharedlib_from_linklib_cmd, +[lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac +]) +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + +_LT_DECL([], [sharedlib_from_linklib_cmd], [1], + [Command to associate shared and link libraries]) +])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB + + +# _LT_PATH_MANIFEST_TOOL +# ---------------------- +# locate the manifest tool +m4_defun([_LT_PATH_MANIFEST_TOOL], +[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&AS_MESSAGE_LOG_FD + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest*]) +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi +_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl +])# _LT_PATH_MANIFEST_TOOL + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT@&t@_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT@&t@_DLSYM_CONST +#else +# define LT@&t@_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT@&t@_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([], [nm_file_list_spec], [1], + [Specify filename containing input files for $NM]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ F* | *Sun*Fortran*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + *Intel*\ [[CF]]*Compiler*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + *Portland\ Group*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac + +AC_CACHE_CHECK([for $compiler option to produce PIC], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + ;; + esac + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + esac + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], + [lt_cv_irix_exported_symbol], + [save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE( + [AC_LANG_SOURCE( + [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], + [C++], [[int foo (void) { return 0; }]], + [Fortran 77], [[ + subroutine foo + end]], + [Fortran], [[ + subroutine foo + end]])])], + [lt_cv_irix_exported_symbol=yes], + [lt_cv_irix_exported_symbol=no]) + LDFLAGS="$save_LDFLAGS"]) + if test "$lt_cv_irix_exported_symbol" = yes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting ${shlibpath_var} if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [postlink_cmds], [2], + [Commands necessary for finishing linking programs]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC="$lt_save_CC" +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + gnu*) + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + + _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_FUNC_STRIPNAME_CNF +# ---------------------- +# func_stripname_cnf prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# +# This function is identical to the (non-XSI) version of func_stripname, +# except this one can be used by m4 code that may be executed by configure, +# rather than the libtool script. +m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl +AC_REQUIRE([_LT_DECL_SED]) +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) +func_stripname_cnf () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname_cnf +])# _LT_FUNC_STRIPNAME_CNF + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF +package foo +func foo() { +} +_LT_EOF +]) + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac + +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)="$p" + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)="$p" + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_F77" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} + CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$G77" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" + CFLAGS="$lt_save_CFLAGS" +fi # test "$_lt_disable_F77" != yes + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test "$_lt_disable_FC" != yes + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +CFLAGS=$GCJFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_GO_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Go compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GO_CONFIG], +[AC_REQUIRE([LT_PROG_GO])dnl +AC_LANG_SAVE + +# Source file extension for Go test sources. +ac_ext=go + +# Object file extension for compiled Go test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="package main; func main() { }" + +# Code to be used in simple link tests +lt_simple_link_test_code='package main; func main() { }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GOC-"gccgo"} +CFLAGS=$GOFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# Go did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GO_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_GO +# ---------- +AC_DEFUN([LT_PROG_GO], +[AC_CHECK_TOOL(GOC, gccgo,) +]) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + +# _LT_DECL_DLLTOOL +# ---------------- +# Ensure DLLTOOL variable is set. +m4_defun([_LT_DECL_DLLTOOL], +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) +AC_SUBST([DLLTOOL]) +]) + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +AC_MSG_RESULT([$xsi_shell]) +_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +AC_MSG_CHECKING([whether the shell understands "+="]) +lt_shell_append=no +( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +AC_MSG_RESULT([$lt_shell_append]) +_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) +# ------------------------------------------------------ +# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and +# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. +m4_defun([_LT_PROG_FUNCTION_REPLACE], +[dnl { +sed -e '/^$1 ()$/,/^} # $1 /c\ +$1 ()\ +{\ +m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) +} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: +]) + + +# _LT_PROG_REPLACE_SHELLFNS +# ------------------------- +# Replace existing portable implementations of several shell functions with +# equivalent extended shell implementations where those features are available.. +m4_defun([_LT_PROG_REPLACE_SHELLFNS], +[if test x"$xsi_shell" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl + func_split_long_opt_name=${1%%=*} + func_split_long_opt_arg=${1#*=}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) + + _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) + + _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) + + _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) +fi + +if test x"$lt_shell_append" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) + + _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl + func_quote_for_eval "${2}" +dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ + eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) +fi +]) + +# _LT_PATH_CONVERSION_FUNCTIONS +# ----------------------------- +# Determine which file name conversion functions should be used by +# func_to_host_file (and, implicitly, by func_to_host_path). These are needed +# for certain cross-compile configurations and native mingw. +m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_MSG_CHECKING([how to convert $build file names to $host format]) +AC_CACHE_VAL(lt_cv_to_host_file_cmd, +[case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +]) +to_host_file_cmd=$lt_cv_to_host_file_cmd +AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) +_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], + [0], [convert $build file names to $host format])dnl + +AC_MSG_CHECKING([how to convert $build file names to toolchain format]) +AC_CACHE_VAL(lt_cv_to_tool_file_cmd, +[#assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac +]) +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) +_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], + [0], [convert $build files to toolchain format])dnl +])# _LT_PATH_CONVERSION_FUNCTIONS diff --git a/src/SDL2/external/libpng-1.6.2/scripts/ltoptions.m4 b/src/SDL2/external/libpng-1.6.2/scripts/ltoptions.m4 new file mode 100644 index 000000000..5d9acd8e2 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/ltoptions.m4 @@ -0,0 +1,384 @@ +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 7 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option `$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + ]) +])# _LT_SET_OPTIONS + + +## --------------------------------- ## +## Macros to handle LT_INIT options. ## +## --------------------------------- ## + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [pic_mode=default]) + +test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + +## ----------------- ## +## LTDL_INIT Options ## +## ----------------- ## + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) diff --git a/src/SDL2/external/libpng-1.6.2/scripts/ltsugar.m4 b/src/SDL2/external/libpng-1.6.2/scripts/ltsugar.m4 new file mode 100644 index 000000000..9000a057d --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/ltsugar.m4 @@ -0,0 +1,123 @@ +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) diff --git a/src/SDL2/external/libpng-1.6.2/scripts/ltversion.m4 b/src/SDL2/external/libpng-1.6.2/scripts/ltversion.m4 new file mode 100644 index 000000000..07a8602d4 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/ltversion.m4 @@ -0,0 +1,23 @@ +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# @configure_input@ + +# serial 3337 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.4.2]) +m4_define([LT_PACKAGE_REVISION], [1.3337]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.4.2' +macro_revision='1.3337' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) diff --git a/src/SDL2/external/libpng-1.6.2/scripts/lt~obsolete.m4 b/src/SDL2/external/libpng-1.6.2/scripts/lt~obsolete.m4 new file mode 100644 index 000000000..c573da90c --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/lt~obsolete.m4 @@ -0,0 +1,98 @@ +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) diff --git a/src/SDL2/external/libpng-1.6.2/scripts/macro.lst b/src/SDL2/external/libpng-1.6.2/scripts/macro.lst new file mode 100644 index 000000000..57124b76a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/macro.lst @@ -0,0 +1,3 @@ +get_uint_32(buf) +get_uint_16(buf) +get_int_32(buf) diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.32sunu b/src/SDL2/external/libpng-1.6.2/scripts/makefile.32sunu new file mode 100644 index 000000000..6eef5b7b4 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.32sunu @@ -0,0 +1,241 @@ +# makefile for libpng on Solaris 2.x with cc +# Contributed by William L. Sebok, based on makefile.linux +# Copyright (C) 2002, 2006, 2010-2011 Glenn Randers-Pehrson +# Copyright (C) 1998 Greg Roelofs +# Copyright (C) 1996, 1997 Andreas Dilger + +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Library name: +LIBNAME=libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).so +LIBSOMAJ=$(LIBNAME).so.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.so + +# Utilities: +CC=cc +AR_RC=ar rc +MKDIR_P=mkdir -p +LN_SF=ln -f -s +RANLIB=echo +RM_F=/bin/rm -f + +SUN_CC_FLAGS=-fast -xtarget=ultra +SUN_LD_FLAGS=-fast -xtarget=ultra + +# where make install puts libpng.a, libpng16.so and libpng16/png.h +prefix=/a +exec_prefix=$(prefix) + +# Where the zlib library and include files are located +# Changing these to ../zlib poses a security risk. If you want +# to have zlib in an adjacent directory, specify the full path instead of "..". +#ZLIBLIB=../zlib +#ZLIBINC=../zlib + +ZLIBLIB=/usr/lib +ZLIBINC=/usr/include + +WARNMORE=-Wwrite-strings -Wpointer-arith -Wshadow \ + -Wmissing-declarations -Wtraditional -Wcast-align \ + -Wstrict-prototypes -Wmissing-prototypes #-Wconversion +CFLAGS=-I$(ZLIBINC) $(SUN_CC_FLAGS) \ + # $(WARNMORE) -g -DPNG_DEBUG=5 +LDFLAGS=$(SUN_LD_FLAGS) -L$(ZLIBLIB) -R$(ZLIBLIB) libpng.a -lz -lm + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) -KPIC -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest libpng.pc libpng-config + +include scripts/pnglibconf.mak +DELETE = $(RM_F) +DFNFLAGS = $(DEFS) $(CPPFLAGS) + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo libdir=\"$(LIBPATH)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo R_opts=\"-R$(LIBPATH)\"; \ + echo ccopts=\"-xtarget=ultra\"; \ + echo ldopts=\"-xtarget=ultra\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) + @case "`type ld`" in *ucb*) \ + echo; \ + echo '## WARNING:'; \ + echo '## The commands "CC" and "LD" must NOT refer to /usr/ucb/cc'; \ + echo '## and /usr/ucb/ld. If they do, you need to adjust your PATH'; \ + echo '## environment variable to put /usr/ccs/bin ahead of /usr/ucb.'; \ + echo '## The environment variable LD_LIBRARY_PATH should not be set'; \ + echo '## at all. If it is, things are likely to break because of'; \ + echo '## the libucb dependency that is created.'; \ + echo; \ + ;; \ + esac + $(LD) -G -L$(ZLIBLIB) -R$(ZLIBLIB) -h $(LIBSOMAJ) \ + -o $(LIBSOMAJ) $(OBJSDLL) + +pngtest: pngtest.o $(LIBSO) + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) $(SUN_CC_FLAGS) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -o pngtestd -L$(DL) -R$(DL) `$(BINPATH)/$(LIBNAME)-config --ldflags` \ + $(SUN_LD_FLAGS) -L$(ZLIBLIB) -R$(ZLIBLIB) + ./pngtestd pngtest.png + +test-installed: + echo + echo Testing installed dynamic shared library. + $(CC) $(SUN_CC_FLAGS) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` \ + $(SUN_LD_FLAGS) -L$(ZLIBLIB) -R$(ZLIBLIB) + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngtesti pngout.png \ + libpng-config $(LIBSO) $(LIBSOMAJ)* \ + libpng.pc + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o png.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o pngerror.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o pngrio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o pngwio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o pngmem.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o pngset.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o pngget.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o pngread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o pngrtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o pngrutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o pngtrans.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o pngwrite.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o pngwtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o pngwutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o pngpread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.64sunu b/src/SDL2/external/libpng-1.6.2/scripts/makefile.64sunu new file mode 100644 index 000000000..1aaf69625 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.64sunu @@ -0,0 +1,241 @@ +# makefile for libpng on Solaris 2.x with cc +# Contributed by William L. Sebok, based on makefile.linux +# Copyright (C) 2002, 2006, 2010-2011 Glenn Randers-Pehrson +# Copyright (C) 1998 Greg Roelofs +# Copyright (C) 1996, 1997 Andreas Dilger + +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Library name: +LIBNAME=libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).so +LIBSOMAJ=$(LIBNAME).so.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.so + +# Utilities: +CC=cc +AR_RC=ar rc +MKDIR_P=mkdir -p +LN_SF=ln -f -s +RANLIB=echo +RM_F=/bin/rm -f + +SUN_CC_FLAGS=-fast -xtarget=ultra -xarch=v9 +SUN_LD_FLAGS=-fast -xtarget=ultra -xarch=v9 + +# where make install puts libpng.a, libpng16.so and libpng16/png.h +prefix=/a +exec_prefix=$(prefix) + +# Where the zlib library and include files are located +# Changing these to ../zlib poses a security risk. If you want +# to have zlib in an adjacent directory, specify the full path instead of "..". +#ZLIBLIB=../zlib +#ZLIBINC=../zlib + +ZLIBLIB=/usr/lib +ZLIBINC=/usr/include + +WARNMORE=-Wwrite-strings -Wpointer-arith -Wshadow \ + -Wmissing-declarations -Wtraditional -Wcast-align \ + -Wstrict-prototypes -Wmissing-prototypes #-Wconversion +CFLAGS=-I$(ZLIBINC) $(SUN_CC_FLAGS) \ + # $(WARNMORE) -g -DPNG_DEBUG=5 +LDFLAGS=-L. -R. $(SUN_LD_FLAGS) -L$(ZLIBLIB) -R$(ZLIBLIB) -lpng16 -lz -lm + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) -KPIC -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest libpng.pc libpng-config + +include scripts/pnglibconf.mak +DELETE = $(RM_F) +DFNFLAGS = $(DEFS) $(CPPFLAGS) + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo libdir=\"$(LIBPATH)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo R_opts=\"-R$(LIBPATH)\"; \ + echo ccopts=\"-xtarget=ultra -xarch=v9\"; \ + echo ldopts=\"-xtarget=ultra -xarch=v9\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) + @case "`type ld`" in *ucb*) \ + echo; \ + echo '## WARNING:'; \ + echo '## The commands "CC" and "LD" must NOT refer to /usr/ucb/cc'; \ + echo '## and /usr/ucb/ld. If they do, you need to adjust your PATH'; \ + echo '## environment variable to put /usr/ccs/bin ahead of /usr/ucb.'; \ + echo '## The environment variable LD_LIBRARY_PATH should not be set'; \ + echo '## at all. If it is, things are likely to break because of'; \ + echo '## the libucb dependency that is created.'; \ + echo; \ + ;; \ + esac + $(LD) -G -L$(ZLIBLIB) -R$(ZLIBLIB) -h $(LIBSOMAJ) \ + -o $(LIBSOMAJ) $(OBJSDLL) + +pngtest: pngtest.o $(LIBSO) + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install-headers: png.h pngconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) $(SUN_CC_FLAGS) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -o pngtestd -L$(DL) -R$(DL) `$(BINPATH)/$(LIBNAME)-config --ldflags` \ + $(SUN_LD_FLAGS) -L$(ZLIBLIB) -R$(ZLIBLIB) + ./pngtestd pngtest.png + +test-installed: + echo + echo Testing installed dynamic shared library. + $(CC) $(SUN_CC_FLAGS) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` \ + $(SUN_LD_FLAGS) -L$(ZLIBLIB) -R$(ZLIBLIB) + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngtesti pngout.png \ + libpng-config $(LIBSO) $(LIBSOMAJ)* \ + libpng.pc + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o png.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o pngerror.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o pngrio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o pngwio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o pngmem.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o pngset.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o pngget.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o pngread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o pngrtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o pngrutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o pngtrans.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o pngwrite.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o pngwtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o pngwutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o pngpread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.acorn b/src/SDL2/external/libpng-1.6.2/scripts/makefile.acorn new file mode 100644 index 000000000..00b8fb5b3 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.acorn @@ -0,0 +1,57 @@ +# Project: libpng + + +# Toolflags: +CCflags = -c -depend !Depend -IC:,Zlib: -g -throwback -DRISCOS -fnah +C++flags = -c -depend !Depend -IC: -throwback +Linkflags = -aif -c++ -o $@ +ObjAsmflags = -throwback -NoCache -depend !Depend +CMHGflags = +LibFileflags = -c -l -o $@ +Squeezeflags = -o $@ + +# Final targets: +@.libpng-lib: @.o.png @.o.pngerror @.o.pngrio @.o.pngwio @.o.pngmem \ + @.o.pngpread @.o.pngset @.o.pngget @.o.pngread @.o.pngrtran \ + @.o.pngrutil @.o.pngtrans @.o.pngwrite @.o.pngwtran @.o.pngwutil + LibFile $(LibFileflags) @.o.png @.o.pngerror @.o.pngrio @.o.pngrtran \ + @.o.pngmem @.o.pngpread @.o.pngset @.o.pngget @.o.pngread @.o.pngwio \ + @.o.pngrutil @.o.pngtrans @.o.pngwrite @.o.pngwtran @.o.pngwutil +@.mm-libpng-lib: @.mm.png @.mm.pngerror @.mm.pngrio @.mm.pngwio @.mm.pngmem \ + @.mm.pngpread @.mm.pngset @.mm.pngget @.mm.pngread @.mm.pngrtran \ + @.mm.pngrutil @.mm.pngtrans @.mm.pngwrite @.mm.pngwtran @.mm.pngwutil + LibFile $(LibFileflags) @.mm.png @.mm.pngerror @.mm.pngrio \ + @.mm.pngwio @.mm.pngmem @.mm.pngpread @.mm.pngset @.mm.pngget \ + @.mm.pngread @.mm.pngrtran @.mm.pngrutil @.mm.pngtrans @.mm.pngwrite \ + @.mm.pngwtran @.mm.pngwutil + + +# User-editable dependencies: +# (C) Copyright 1997 Tom Tanner +Test: @.pngtest + .pngtest + @remove .pngtest + +#It would be nice if you could stop "make" listing from here on! +@.pngtest: @.o.pngtest @.libpng-lib C:o.Stubs Zlib:zlib_lib + Link $(Linkflags) @.o.pngtest @.libpng-lib C:o.Stubs Zlib:zlib_lib + +.SUFFIXES: .o .mm .c + +.c.mm: + MemCheck.CC cc $(ccflags) -o $@ LibPng:$< +.c.o: + cc $(ccflags) -o $@ $< + +# See scripts.mak.libpngconf for how to generate this: +@.h.libpngconf: @.scripts.h.libpngconf + copy @.scripts.h.libpngconf $@ + +# Static dependencies: +@.o.png @.o.pngerror @.o.pngrio @.o.pngwio @.o.pngmem \ +@.o.pngpread @.o.pngset @.o.pngget @.o.pngread @.o.pngrtran \ +@.o.pngrutil @.o.pngtrans @.o.pngwrite @.o.pngwtran @.o.pngwutil \ +@.o.pngtest: @.h.libpngconf + + +# Dynamic dependencies: diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.aix b/src/SDL2/external/libpng-1.6.2/scripts/makefile.aix new file mode 100644 index 000000000..ae89cd441 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.aix @@ -0,0 +1,121 @@ +# makefile for libpng using gcc (generic, static library) +# Copyright (C) 2002, 2006-2009 Glenn Randers-Pehrson +# Copyright (C) 2000 Cosmin Truta +# Copyright (C) 2000 Marc O. Gloor (AIX support added, from makefile.gcc) +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Location of the zlib library and include files +ZLIBINC = ../zlib +ZLIBLIB = ../zlib + +# Compiler, linker, lib and other tools +CC = gcc +LD = $(CC) +AR_RC = ar rcs +MKDIR_P = mkdir -p +RANLIB = ranlib +RM_F = rm -f +LN_SF = ln -f -s + +LIBNAME=libpng16 +PNGMAJ = 16 + +prefix=/usr/local +INCPATH=$(prefix)/include +LIBPATH=$(prefix)/lib + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) + +CDEBUG = -g -DPNG_DEBUG=5 +LDDEBUG = +CRELEASE = -O2 +LDRELEASE = -s +WARNMORE=-W -Wall +CFLAGS = -I$(ZLIBINC) $(WARNMORE) $(CRELEASE) +LDFLAGS = -L. -L$(ZLIBLIB) -lpng16 -lz -lm $(LDRELEASE) + +# File extensions +O=.o +A=.a +E= + +# Variables +OBJS = png$(O) pngerror$(O) pngget$(O) pngmem$(O) pngpread$(O) \ + pngread$(O) pngrio$(O) pngrtran$(O) pngrutil$(O) pngset$(O) \ + pngtrans$(O) pngwio$(O) pngwrite$(O) pngwtran$(O) pngwutil$(O) + +# Targets +all: $(LIBNAME)$(A) pngtest$(E) + +include scripts/pnglibconf.mak +REMOVE = $(RM_F) +DFNFLAGS = $(DEFS) $(CPPFLAGS) + +$(LIBNAME)$(A): $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +test: pngtest$(E) + ./pngtest$(E) + +pngtest$(E): pngtest$(O) $(LIBNAME)$(A) + $(LD) -o $@ pngtest$(O) $(LDFLAGS) + +install: $(LIBNAME)$(A) + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DI)/$(LIBNAME)/png.h + -@$(RM_F) $(DI)/$(LIBNAME)/pngconf.h + -@$(RM_F) $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h + -@$(RM_F) $(DI)/pngconf.h + -@$(RM_F) $(DI)/pnglibconf.h + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h \ + $(DI)/$(LIBNAME)/pngconf.h \ + $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) -r $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + -@$(RM_F) $(DL)/$(LIBNAME)$(A) + -@$(RM_F) $(DL)/libpng$(A) + cp $(LIBNAME)$(A) $(DL)/$(LIBNAME)$(A) + chmod 644 $(DL)/$(LIBNAME)$(A) + (cd $(DL); $(LN_SF) $(LIBNAME)$(A) libpng$(A)) + (cd $(DI); $(LN_SF) libpng/* .;) + +clean: + $(RM_F) *.o $(LIBNAME)$(A) pngtest pngout.png pnglibconf.h + +png$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest$(O): png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.amiga b/src/SDL2/external/libpng-1.6.2/scripts/makefile.amiga new file mode 100644 index 000000000..228b5c22a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.amiga @@ -0,0 +1,56 @@ +# Commodore Amiga Makefile +# makefile for libpng and SAS C V6.5x compiler +# Copyright (C) 1995-2000 Wolf Faust +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h +# +# Location/path of zlib include files +ZLIB=/zlib +#compiler +CC=sc +#compiler flags +# WARNING: a bug in V6.51 causes bad code with OPTGO +# So use V6.55 or set NOOPTGO!!!!!!!!! +CFLAGS= NOSTKCHK PARMS=REG OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL\ + OPTLOOP OPTRDEP=4 OPTDEP=4 OPTCOMP=4 INCLUDEDIR=$(ZLIB) \ + DEFINE=PNG_INTERNAL +#linker flags +LDFLAGS= SD ND BATCH +#link libs +LDLIBS= libpng.lib libgz.lib LIB:scm.lib LIB:sc.lib Lib:amiga.lib +# linker +LN= slink +# file deletion command +RM= delete quiet +# file copy command? +CP= copy +# library (.lib) file creation command +AR= oml +# make directory command +MKDIR= makedir + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +all: libpng.lib pngtest + +libpng.lib: $(OBJS) +-$(RM) libpng.lib +$(AR) libpng.lib r $(OBJS) + +$(OBJS): pngpriv.h png.h pngconf.h pnglibconf.h pnginfo.h pngstruct.h pngdebug.h + +pnglibconf.h: scripts/pnglibconf.h.prebuilt +$(CP) scripts/pnglibconf.h.prebuilt pnglibconf.h + +pngtest: pngtest.o libpng.lib +$(LN) libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo libs=\"-lpng16 -lz \"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + cp $(LIBSO)* /boot/home/config/lib + +$(LIBSOMAJ): $(OBJSDLL) + $(CC) -nostart -Wl,-soname,$(LIBSOMAJ) -o \ + $(LIBSOMAJ) $(OBJSDLL) $(LDFLAGS) + +pngtest: pngtest.o $(LIBSO) + $(CC) -L$(ZLIBLIB) -L. -lz -lpng16 -o pngtest pngtest.o + +test: pngtest + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) $(CFLAGS) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) -Wl,-rpath $(ZLIBLIB):$(DL) \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtestd pngtest.png + +test-installed: + $(CC) $(CFLAGS) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(ZLIBLIB) -Wl,-rpath,$(ZLIBLIB) \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngout.png libpng-config \ + $(LIBSO) $(LIBSOMAJ)* pngtesti \ + pnglibconf.h libpng.pc + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o png.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o pngerror.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o pngrio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o pngwio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o pngmem.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o pngset.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o pngget.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o pngread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o pngrtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o pngrutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o pngtrans.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o pngwrite.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o pngwtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o pngwutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o pngpread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.bor b/src/SDL2/external/libpng-1.6.2/scripts/makefile.bor new file mode 100644 index 000000000..e3b36a51e --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.bor @@ -0,0 +1,161 @@ +# Makefile for libpng +# 16-bit Borland C++ (Note: All modules are compiled in C mode) +# To build the library, do: +# "make -fmakefile.bor -DMODEL=c" +# or: "make -fmakefile.bor -DMODEL=l" +# +# ------------ Borland C++ ------------ + +### Absolutely necessary for this makefile to work +.AUTODEPEND + +## Where zlib.h, zconf.h and zlib_MODEL.lib are +ZLIB_DIR=..\zlib + +## Compiler, linker and lib stuff +CC=bcc +LD=bcc +LIB=tlib + +!ifndef MODEL +MODEL=l +!endif + +MODEL_ARG=-m$(MODEL) + +#TARGET_CPU=3 +# 2 = 286, 3 = 386, etc. +!ifndef TARGET_CPU +TARGET_CPU=2 +!endif + +# Use this if you don't want Borland's fancy exception handling +# (for Borland C++ 4.0 or later) +#NOEHLIB=noeh$(MODEL).lib + +!ifdef DEBUG +CDEBUG=-v +LDEBUG=-v +!else +CDEBUG= +LDEBUG= +!endif + +# STACKOFLOW=1 +!ifdef STACKOFLOW +CDEBUG=$(CDEBUG) -N +LDEBUG=$(LDEBUG) -N +!endif + +# -X- turn on dependency generation in the object file +# -w set all warnings on +# -O2 optimize for speed +# -Z global optimization +CFLAGS=-O2 -Z -X- -w -I$(ZLIB_DIR) -$(TARGET_CPU) $(MODEL_ARG) $(CDEBUG) + +# -M generate map file +LDFLAGS=-M -L$(ZLIB_DIR) $(MODEL_ARG) $(LDEBUG) + +## Variables + +OBJS = \ + png.obj \ + pngerror.obj \ + pngget.obj \ + pngmem.obj \ + pngpread.obj \ + pngread.obj \ + pngrio.obj \ + pngrtran.obj \ + pngrutil.obj \ + pngset.obj \ + pngtrans.obj \ + pngwio.obj \ + pngwrite.obj \ + pngwtran.obj \ + pngwutil.obj + +LIBOBJS = \ + +png.obj \ + +pngerror.obj \ + +pngget.obj \ + +pngmem.obj \ + +pngpread.obj \ + +pngread.obj \ + +pngrio.obj \ + +pngrtran.obj \ + +pngrutil.obj \ + +pngset.obj \ + +pngtrans.obj \ + +pngwio.obj \ + +pngwrite.obj \ + +pngwtran.obj \ + +pngwutil.obj + +LIBNAME=libpng$(MODEL).lib + +## Implicit rules + +# Braces let make "batch" calls to the compiler, +# 2 calls instead of 12; space is important. +.c.obj: + $(CC) $(CFLAGS) -c {$*.c } + +.c.exe: + $(CC) $(CFLAGS) $(LDFLAGS) $*.c $(LIBNAME) zlib_$(MODEL).lib $(NOEHLIB) + +## Major targets + +all: libpng pngtest + +# try !inlude scripts\pnglibconf.mak for more options +pnglibconf.h: scripts\pnglibconf.h.prebuilt + copy scripts\pnglibconf.h.prebuilt $@ + +libpng: $(LIBNAME) + +pngtest: pngtest$(MODEL).exe + +test: pngtest$(MODEL).exe + pngtest$(MODEL) + +## Minor Targets + +png.obj: png.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.obj: pngerror.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.obj: pngget.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.obj: pngmem.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.obj: pngpread.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.obj: pngread.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.obj: pngrio.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.obj: pngrtran.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.obj: pngrutil.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.obj: pngset.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.obj: pngtrans.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.obj: pngwio.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.obj: pngwrite.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.obj: pngwtran.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.obj: pngwutil.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +$(LIBNAME): $(OBJS) + -del $(LIBNAME) + $(LIB) $(LIBNAME) @&&| +$(LIBOBJS), libpng$(MODEL) +| + +pngtest$(MODEL).obj: pngtest.c png.h pngconf.h pnglibconf.h + $(CC) $(CFLAGS) -opngtest$(MODEL) -c pngtest.c + +pngtest$(MODEL).exe: pngtest$(MODEL).obj + $(LD) $(LDFLAGS) pngtest$(MODEL).obj $(LIBNAME) zlib_$(MODEL).lib $(NOEHLIB) + +# Clean up anything else you want +clean: + -del pnglibconf.h + -del *.obj + -del *.exe + -del *.lib + -del *.lst + -del *.map + +# End of makefile for libpng diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.cegcc b/src/SDL2/external/libpng-1.6.2/scripts/makefile.cegcc new file mode 100644 index 000000000..d13012d0d --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.cegcc @@ -0,0 +1,116 @@ +# Makefile for creating Windows CE release archives, with the +# mingw32ce compiler. + +# Last updated: 22-Jul-2008 + +# Copyright (C) 2008 Vincent Torri + +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# To get some help, type +# +# make help +# +# To create the archives +# +# make +# +# To remove everything, type: +# +# make clean + +VERMAJ = 1 +VERMIN = 6 +VERMIC = 2 +VER = $(VERMAJ).$(VERMIN).$(VERMIC) +NAME = libpng +PACKAGE = $(NAME)-$(VER) + +BIN = libpng16-0.dll +LIB = libpng16.a libpng16.dll.a libpng.a libpng.dll.a +INCLUDE = png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +PC = libpng16.pc libpng.pc + +MANIFESTVERBIN = "Libpng-$(VER): Binary files" +MANIFESTVERDEV = "Libpng-$(VER): Developer files" +MANIFESTVERDESC = "Libpng: the official PNG reference library" + +all: $(NAME) + +$(NAME): remove-old copy-src compilation copy manifest archive + @echo " * Removal of the directories" + @rm -rf $(PACKAGE)/ $(PACKAGE)-bin/ $(PACKAGE)-dev/ + +remove-old: + @echo " * Removal of the old files" + @rm -rf $(PACKAGE)-bin* + @rm -rf $(PACKAGE)-dev* + +copy-src: + @echo " * Copy of source files" + @cp -R ../src/$(PACKAGE) . + @echo " * Creation of directories and files" + @mkdir -p $(PACKAGE)-bin/bin + @mkdir -p $(PACKAGE)-bin/manifest + @mkdir -p $(PACKAGE)-dev/lib/pkgconfig + @mkdir -p $(PACKAGE)-dev/include/$(NAME)$(VERMAJ)$(VERMIN) + @mkdir -p $(PACKAGE)-dev/manifest + @touch $(PACKAGE)-bin/manifest/$(PACKAGE)-bin.mft + @touch $(PACKAGE)-bin/manifest/$(PACKAGE)-bin.ver + @touch $(PACKAGE)-dev/manifest/$(PACKAGE)-dev.mft + @touch $(PACKAGE)-dev/manifest/$(PACKAGE)-dev.ver + +compilation: + @echo " * Compilation of $(PACKAGE)" + cd $(PACKAGE) && CPPFLAGS="$(CPPFLAGS) -DPNG_CONSOLE_IO_SUPPORTED -D_WIN32_WCE=0x0420" \ + CFLAGS="$(CFLAGS) -mms-bitfields -O3 -pipe -fomit-frame-pointer" \ + LDFLAGS="$(LDFLAGS) -Wl,--enable-auto-import -Wl,-s" \ + ./configure --prefix=/opt/wince --host=arm-mingw32ce && make + +copy: + @echo " * Copy of binary and development files" + @for i in $(BIN); do \ + cp $(PACKAGE)/.libs/$$i $(PACKAGE)-bin/bin; \ + done + @for i in $(LIB); do \ + cp $(PACKAGE)/.libs/$$i $(PACKAGE)-dev/lib; \ + done + @for i in $(INCLUDE); do \ + cp $(PACKAGE)/$$i $(PACKAGE)-dev/include/$(NAME)$(VERMAJ)$(VERMIN); \ + done + @for i in $(PC); do \ + cp $(PACKAGE)/$$i $(PACKAGE)-dev/lib/pkgconfig; \ + done + +manifest: + @echo " * Creation of the manifest" + @cd $(PACKAGE)-bin && find * >> manifest/$(PACKAGE)-bin.mft + @cd $(PACKAGE)-bin && \ + echo $(MANIFESTVERBIN) >> manifest/$(PACKAGE)-bin.ver && \ + echo $(MANIFESTVERDESC) >> manifest/$(PACKAGE)-bin.ver + @cd $(PACKAGE)-dev && find * >> manifest/$(PACKAGE)-dev.mft + @cd $(PACKAGE)-dev && \ + echo $(MANIFESTVERDEV) >> manifest/$(PACKAGE)-dev.ver && \ + echo $(MANIFESTVERDESC) >> manifest/$(PACKAGE)-dev.ver + +archive: + @echo " * Creation of the archives" + @tar cf $(PACKAGE)-bin.tar $(PACKAGE)-bin + @bzip2 -9 $(PACKAGE)-bin.tar + @tar cf $(PACKAGE)-dev.tar $(PACKAGE)-dev + @bzip2 -9 $(PACKAGE)-dev.tar + +clean: + @echo " * Cleaning" + @rm -rf $(PACKAGE)* + +help: + @echo + @echo "To create the archives, type:" + @echo " make" + @echo + @echo "To remove everything, type:" + @echo " make clean" + @echo diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.darwin b/src/SDL2/external/libpng-1.6.2/scripts/makefile.darwin new file mode 100644 index 000000000..814fef502 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.darwin @@ -0,0 +1,218 @@ +# makefile for libpng on Darwin / Mac OS X +# Copyright (C) 2002, 2004, 2006, 2008, 2010-2011 Glenn Randers-Pehrson +# Copyright (C) 2001 Christoph Pfisterer +# derived from makefile.linux: +# Copyright (C) 1998, 1999 Greg Roelofs +# Copyright (C) 1996, 1997 Andreas Dilger +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# where "make install" puts libpng.a, libpng16.dylib, png.h, pngconf.h, +# and pnglibconf.h +prefix=/usr/local +exec_prefix=$(prefix) + +# Where the zlib library and include files are located +ZLIBLIB=/usr/lib +ZLIBINC=/usr/include + +# Library name: +LIBNAME = libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).dylib +LIBSOMAJ=$(LIBNAME).$(PNGMAJ).dylib +LIBSOREL=$(LIBNAME).$(PNGMAJ).$(RELEASE).dylib +OLDSO=libpng.dylib + +# Utilities: +CC=cc +AR_RC=ar rc +MKDIR_P=mkdir -p +LN_SF=ln -sf +RANLIB=ranlib +RM_F=/bin/rm -f +ARCH=-arch ppc -arch i386 -arch x86_64 + +# CFLAGS=-I$(ZLIBINC) -W -Wall -O3 -funroll-loops +CFLAGS=-I$(ZLIBINC) -W -Wall -O -funroll-loops $(ARCH) +LDFLAGS=-L. -L$(ZLIBLIB) -lpng16 -lz $(ARCH) + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) -fno-common -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) + $(CC) -dynamiclib \ + -install_name $(LIBPATH)/$(LIBSOMAJ) \ + -current_version 16 -compatibility_version 16 \ + $(ARCH) -o $(LIBSOMAJ) \ + $(OBJSDLL) -L$(ZLIBLIB) -lz + +pngtest: pngtest.o $(LIBSO) + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + $(RANLIB) $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOMAJ) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL) + chmod 755 $(DL)/$(LIBSOMAJ) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtestd pngtest.png + +test-installed: + $(CC) $(CFLAGS) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(ZLIBLIB) \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngout.png libpng-config \ + libpng.pc $(LIBNAME).*dylib pngtesti pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o png.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o pngerror.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o pngrio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o pngwio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o pngmem.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o pngset.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o pngget.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o pngread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o pngrtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o pngrutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o pngtrans.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o pngwrite.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o pngwtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o pngwutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o pngpread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.dec b/src/SDL2/external/libpng-1.6.2/scripts/makefile.dec new file mode 100644 index 000000000..79e372474 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.dec @@ -0,0 +1,202 @@ +# makefile for libpng on DEC Alpha Unix +# Copyright (C) 2000-2002, 2006, 2010-2011 Glenn Randers-Pehrson +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Library name: +PNGMAJ = 16 +LIBNAME = libpng16 + +# Shared library names: +LIBSO=$(LIBNAME).so +LIBSOMAJ=$(LIBNAME).so.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.so + +# Utilities: +AR_RC=ar rc +CC=cc +MKDIR_P=mkdir +LN_SF=ln -f -s +RANLIB=ranlib +RM_F=/bin/rm -f + +# where make install puts libpng.a and png.h +prefix=/usr/local +exec_prefix=$(prefix) +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +# Where the zlib library and include files are located +#ZLIBLIB=/usr/local/lib +#ZLIBINC=/usr/local/include +ZLIBLIB=../zlib +ZLIBINC=../zlib + +CFLAGS=-std -w1 -I$(ZLIBINC) -O # -g -DPNG_DEBUG=1 +LDFLAGS=-L$(ZLIBLIB) -rpath $(ZLIBLIB) libpng.a -lz -lm + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +all: $(LIBSO) libpng.a pngtest libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo ccopts=\"-std\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJS) + $(CC) -shared -o $@ $(OBJS) -L$(ZLIBLIB) \ + -soname $(LIBSOMAJ) + +pngtest: pngtest.o libpng.a + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@/bin/rm -f $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@/bin/rm -f $(DI)/libpng + (cd $(DI); $(LN_SF)(LIBNAME) libpng; $(LN_SF)(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@/bin/rm -f $(DL)/libpng.a + (cd $(DL); $(LN_SF)(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@/bin/rm -f $(DM)/man3/libpng.3 + -@/bin/rm -f $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@/bin/rm -f $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@/bin/rm -f $(DB)/libpng-config + -@/bin/rm -f $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF)(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -w1 -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) -R$(ZLIBLIB) -R$(DL) \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtestd pngtest.png + +test-installed: + echo + echo Testing installed dynamic shared library. + $(CC) -w1 -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(ZLIBLIB) -R$(ZLIBLIB) \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtesti pngtest.png + +clean: + /bin/rm -f *.o libpng.a pngtest pngtesti pngout.png \ + libpng-config $(LIBSO) $(LIBSOMAJ)* \ + libpng.pc pnglibconf.h + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.dj2 b/src/SDL2/external/libpng-1.6.2/scripts/makefile.dj2 new file mode 100644 index 000000000..ad117bc5e --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.dj2 @@ -0,0 +1,62 @@ +# DJGPP (DOS gcc) makefile for libpng +# Copyright (C) 2002, 2006, 2009-2010-2011 Glenn Randers-Pehrson +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# where make install will put libpng.a and png.h +#prefix=/usr/local +prefix=. +INCPATH=$(prefix)/include +LIBPATH=$(prefix)/lib + +CC=gcc +CFLAGS=-I../zlib -O -DPNG_NO_SNPRINTF +LDFLAGS=-L. -L../zlib/ -lpng -lz -lm + +RANLIB=ranlib + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o pngwtran.o \ + pngmem.o pngerror.o pngpread.o + +all: libpng.a pngtest + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + ar rc $@ $(OBJS) + $(RANLIB) $@ + +pngtest: pngtest.o libpng.a + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + coff2exe pngtest + +test: pngtest + ./pngtest +clean: + rm -f *.o libpng.a pngtest pngout.png pnglibconf.h + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.elf b/src/SDL2/external/libpng-1.6.2/scripts/makefile.elf new file mode 100644 index 000000000..15a8ee67b --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.elf @@ -0,0 +1,263 @@ +# makefile for libpng.a and libpng16.so on Linux ELF with gcc +# Copyright (C) 1998, 1999, 2002, 2006, 2008, 2010-2011 Greg Roelofs +# and Glenn Randers-Pehrson +# Copyright (C) 1996, 1997 Andreas Dilger +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Modified for Debian by Junichi Uekawa and Josselin Mouette +# Major modifications are: +# * link libpng explicitly with libz and libm +# * $(OLDSO).16 is a symlink rather than a different library +# * versioned symbols + +# Library name: +LIBNAME = libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).so +LIBSOMAJ=$(LIBNAME).so.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.so +OLDSOMAJ=libpng.so.16 + +# Utilities: +AR_RC=ar rc +CC=gcc +MKDIR_P=mkdir -p +LN_SF=ln -sf +RANLIB=ranlib +RM_F=/bin/rm -f + +# where "make install" puts libpng16.a, libpng16.so*, +# libpng16/png.h, libpng16/pngconf.h, and libpng16/pnglibconf.h +# Prefix must be a full pathname. +prefix=/usr/local +exec_prefix=$(prefix) + +# Where the zlib library and include files are located. +ZLIBLIB=/usr/local/lib +ZLIBINC=/usr/local/include +# ZLIBLIB=../zlib +# ZLIBINC=../zlib + +ALIGN= +# for i386: +#ALIGN=-malign-loops=2 -malign-functions=2 + +WARNMORE=-Wwrite-strings -Wpointer-arith -Wshadow \ + -Wmissing-declarations -Wtraditional -Wcast-align \ + -Wstrict-prototypes -Wmissing-prototypes #-Wconversion + +# for pgcc version 2.95.1, -O3 is buggy; don't use it. + +CFLAGS=-W -Wall -D_REENTRANT -O2 \ + $(ALIGN) # $(WARNMORE) -g -DPNG_DEBUG=5 + +LDFLAGS=-L. -lpng16 +LDFLAGS_A=libpng.a -lz -lm +LIBADDFLAGS=-lz -lm + + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) -fPIC -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest pngtest-static libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng.syms: png.h pngconf.h pnglibconf.h + $(CC) $(CFLAGS) -E -DPNG_BUILDSYMS -DPNG_INTERNAL png.h |\ + awk -F '[\t [\\]();]' -v PNGMAJ=$(PNGMAJ) 'BEGIN{printf("PNG16_%s {global:\n",PNGMAJ)}\ + { for (i=1;i+2<=NF;++i)\ + if ($$(i)=="PNG_FUNCTION_EXPORT" && $$(i+2)=="END")\ + print $$(i+1) ";";\ + for (i=1;i+1<=NF;++i)\ + if ($$(i)=="PNG_DATA_EXPORT")\ + print $$(i+1) ";";}\ + END{print "local: *; };"}' >$@.new + $(RM_F) $@ + mv $@.new $@ + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo L_opts=\"\"; \ + echo R_opts=\"\"; \ + echo libs=\"-lpng16\"; \ + echo all_libs=\"-lpng16 $(LIBADDFLAGS)\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) libpng.syms + $(CC) -shared -Wl,-soname,$(LIBSOMAJ) \ + -Wl,-version-script,libpng.syms \ + -o $(LIBSOMAJ) \ + $(OBJSDLL) + +pngtest: pngtest.o $(LIBSO) + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +pngtest-static: pngtest.o libpng.a + $(CC) -o pngtest-static $(CFLAGS) pngtest.o $(LDFLAGS_A) + +test: pngtest pngtest-static + @echo "" + @echo " Running pngtest dynamically linked with $(LIBSO):" + @echo "" + LD_LIBRARY_PATH=".:${LD_LIBRARY_PATH}" ./pngtest + @echo "" + @echo " Running pngtest statically linked with libpng.a:" + @echo "" + ./pngtest-static + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) -Wl, -rpath,$(DL) -Wl,-rpath,$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtestd pngtest.png + +test-installed: + $(CC) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(ZLIBLIB) -Wl,-rpath,$(ZLIBLIB) \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a libpng.syms pngtest pngout.png libpng-config \ + $(LIBSO) $(LIBSOMAJ)* pngtest-static pngtesti \ + libpng.pc pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o png.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o pngerror.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o pngrio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o pngwio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o pngmem.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o pngset.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o pngget.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o pngread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o pngrtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o pngrutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o pngtrans.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o pngwrite.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o pngwtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o pngwutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o pngpread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.freebsd b/src/SDL2/external/libpng-1.6.2/scripts/makefile.freebsd new file mode 100644 index 000000000..0ddf4ae4a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.freebsd @@ -0,0 +1,61 @@ +# makefile for libpng under FreeBSD +# Copyright (C) 2002, 2007, 2009 Glenn Randers-Pehrson and Andrey A. Chernov +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +PREFIX?= /usr/local +SHLIB_VER?= 16 + +LIB= png +SHLIB_MAJOR= ${SHLIB_VER} +SHLIB_MINOR= 0 +NO_PROFILE= YES +NO_OBJ= YES + +# where make install puts libpng.a and png.h +DESTDIR= ${PREFIX} +LIBDIR= /lib +INCS= png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +INCSDIR= /include/libpng +INCDIR= ${INCSDIR} # for 4.x bsd.lib.mk +MAN= libpng.3 libpngpf.3 png.5 +MANDIR= /man/man +SYMLINKS= libpng/png.h ${INCSDIR}/../png.h \ + libpng/pngconf.h ${INCSDIR}/../pngconf.h \ + libpng/pnglibconf.h ${INCSDIR}/../pnglibconf.h + +# where make install finds libz.a and zlib.h +ZLIBLIB= /usr/lib +ZLIBINC= /usr/include + +LDADD+= -lm -lz +#LDADD+= -lm -lz -lssp_nonshared # for OSVERSION < 800000 ? + +DPADD+= ${LIBM} ${LIBZ} + +CFLAGS+= -I. -I${ZLIBINC} + +SRCS= png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \ + pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \ + pngwtran.c pngmem.c pngerror.c pngpread.c + +pngtest: pngtest.o libpng.a + ${CC} ${CFLAGS} -L. -static -o pngtest pngtest.o -L${ZLIBLIB} \ + -lpng ${LDADD} + +CLEANFILES= pngtest pngtest.o pngout.png + +test: pngtest + ./pngtest + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +.include diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.gcc b/src/SDL2/external/libpng-1.6.2/scripts/makefile.gcc new file mode 100644 index 000000000..78faa63b2 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.gcc @@ -0,0 +1,87 @@ +# makefile for libpng using gcc (generic, static library) +# Copyright (C) 2008 Glenn Randers-Pehrson +# Copyright (C) 2000 Cosmin Truta +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Location of the zlib library and include files +ZLIBINC = ../zlib +ZLIBLIB = ../zlib + +# Compiler, linker, lib and other tools +CC = gcc +LD = $(CC) +AR_RC = ar rcs +RANLIB = ranlib +RM_F = rm -f + +CDEBUG = -g -DPNG_DEBUG=5 +LDDEBUG = +CRELEASE = -O2 +LDRELEASE = -s +#CFLAGS = -W -Wall $(CDEBUG) +CFLAGS = -W -Wall $(CRELEASE) +#LDFLAGS = $(LDDEBUG) +LDFLAGS = $(LDRELEASE) +LIBS = -lz -lm + +# File extensions +O=.o +A=.a +EXE= + +# Variables +OBJS = png$(O) pngerror$(O) pngget$(O) pngmem$(O) pngpread$(O) \ + pngread$(O) pngrio$(O) pngrtran$(O) pngrutil$(O) pngset$(O) \ + pngtrans$(O) pngwio$(O) pngwrite$(O) pngwtran$(O) pngwutil$(O) + +# Targets +all: static + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +.c$(O): + $(CC) -c $(CFLAGS) -I$(ZLIBINC) $< + +static: libpng$(A) pngtest$(EXE) + +shared: + @echo This is a generic makefile that cannot create shared libraries. + @echo Please use a configuration that is specific to your platform. + @false + +libpng$(A): $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +test: pngtest$(EXE) + ./pngtest$(EXE) + +pngtest$(EXE): pngtest$(O) libpng$(A) + $(LD) $(LDFLAGS) -L$(ZLIBLIB) -o $@ pngtest$(O) libpng$(A) $(LIBS) + +clean: + $(RM_F) *$(O) libpng$(A) pngtest$(EXE) pngout.png pnglibconf.h + +png$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest$(O): png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.hp64 b/src/SDL2/external/libpng-1.6.2/scripts/makefile.hp64 new file mode 100644 index 000000000..bf5196247 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.hp64 @@ -0,0 +1,224 @@ +# makefile for libpng, HPUX (10.20 and 11.00) using the ANSI/C product. +# Copyright (C) 1999-2002, 2006, 2009, 2010-2011 Glenn Randers-Pehrson +# Copyright (C) 1995 Guy Eric Schalnat, Group 42 +# contributed by Jim Rice and updated by Chris Schleicher, Hewlett Packard +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Where the zlib library and include files are located +ZLIBLIB=/opt/zlib/lib +ZLIBINC=/opt/zlib/include + +# Note that if you plan to build a libpng shared library, zlib must also +# be a shared library, which zlib's configure does not do. After running +# zlib's configure, edit the appropriate lines of makefile to read: +# CFLAGS=-O1 -DHAVE_UNISTD -DUSE_MAP -fPIC \ +# LDSHARED=ld -b +# SHAREDLIB=libz.sl + +# Library name: +LIBNAME = libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).sl +LIBSOMAJ=$(LIBNAME).sl.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.sl + +# Utilities: +AR_RC=ar rc +CC=cc +MKDIR_P=mkdir -p +LN_SF=ln -sf +RANLIB=ranlib +RM_F=/bin/rm -f + +CFLAGS=-I$(ZLIBINC) -O -Ae -Wl,+vnocompatwarnings +DD64 \ +-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 +Z -DHAVE_UNISTD_H -DUSE_MMAP +# Caution: be sure you have built zlib with the same CFLAGS. +CCFLAGS=-I$(ZLIBINC) -O -Ae -Wl,+vnocompatwarnings +DD64 \ +-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 +Z -DHAVE_UNISTD_H -DUSE_MMAP + +LDFLAGS=-L. -L$(ZLIBLIB) -lpng -lz -lm + +# where make install puts libpng.a, libpng16.sl, and png.h +prefix=/opt/libpng +exec_prefix=$(prefix) +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) +z -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo ccopts=\"-Ae +DA1.1 +DS2.0\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) + $(LD) -b +s \ + +h $(LIBSOMAJ) -o $(LIBSOMAJ) $(OBJSDLL) + +pngtest: pngtest.o libpng.a + $(CC) -o pngtest $(CCFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) $(CCFLAGS) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtestd pngtest.png + +test-installed: + echo + echo Testing installed dynamic shared library. + $(CC) $(CCFLAGS) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(ZLIBLIB) \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngtesti pngout.png \ + libpng-config $(LIBSO) $(LIBSOMAJ)* \ + libpng.pc pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.hpgcc b/src/SDL2/external/libpng-1.6.2/scripts/makefile.hpgcc new file mode 100644 index 000000000..bf44d2262 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.hpgcc @@ -0,0 +1,230 @@ +# makefile for libpng on HP-UX using GCC with the HP ANSI/C linker. +# Copyright (C) 2002, 2006-2008, 2010-2011 Glenn Randers-Pehrson +# Copyright (C) 2001, Laurent faillie +# Copyright (C) 1998, 1999 Greg Roelofs +# Copyright (C) 1996, 1997 Andreas Dilger +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Library name: +LIBNAME = libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).sl +LIBSOMAJ=$(LIBNAME).sl.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.sl + +# Utilities: +CC=gcc +LD=ld +AR_RC=ar rc +MKDIR_P=mkdir -p +LN_SF=ln -sf +RANLIB=ranlib +RM_F=/bin/rm -f + +# where "make install" puts libpng.a, $(OLDSO)*, png.h, pngconf.h +# and pnglibconf.h +prefix=/usr/local +exec_prefix=$(prefix) + +# Where the zlib library and include files are located +ZLIBLIB=/opt/zlib/lib +ZLIBINC=/opt/zlib/include + +# Note that if you plan to build a libpng shared library, zlib must also +# be a shared library, which zlib's configure does not do. After running +# zlib's configure, edit the appropriate lines of makefile to read: +# CFLAGS=-O1 -DHAVE_UNISTD -DUSE_MAP -fPIC \ +# LDSHARED=ld -b +# SHAREDLIB=libz.sl + +ALIGN= +# for i386: +#ALIGN=-malign-loops=2 -malign-functions=2 + +WARNMORE=-Wwrite-strings -Wpointer-arith -Wshadow \ + -Wmissing-declarations -Wtraditional -Wcast-align \ + -Wstrict-prototypes -Wmissing-prototypes #-Wconversion + +# for pgcc version 2.95.1, -O3 is buggy; don't use it. + +CFLAGS=-I$(ZLIBINC) -W -Wall -O3 -funroll-loops -DPNG_NO_MMX_CODE \ + $(ALIGN) # $(WARNMORE) -g -DPNG_DEBUG=5 +#LDFLAGS=-L. -Wl,-rpath,. -L$(ZLIBLIB) -Wl,-rpath,$(ZLIBLIB) -lpng16 -lz -lm +LDFLAGS=-L. -L$(ZLIBLIB) -lpng16 -lz -lm + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) -fPIC -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest libpng.pc libpng-config + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) + $(LD) -b +s \ + +h $(LIBSOMAJ) -o $(LIBSOMAJ) $(OBJSDLL) + +pngtest: pngtest.o $(LIBSO) + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) -Wl,-rpath,$(DL) -Wl,-rpath,$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtestd pngtest.png + +test-installed: + echo + echo Testing installed dynamic shared library. + $(CC) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(ZLIBLIB) -Wl,-rpath,$(ZLIBLIB) \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngtesti pngout.png \ + libpng-config $(LIBSO) $(LIBSOMAJ)* \ + libpng.pc pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o png.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o pngerror.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o pngrio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o pngwio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o pngmem.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o pngset.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o pngget.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o pngread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o pngrtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o pngrutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o pngtrans.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o pngwrite.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o pngwtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o pngwutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o pngpread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.hpux b/src/SDL2/external/libpng-1.6.2/scripts/makefile.hpux new file mode 100644 index 000000000..1c2970b7f --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.hpux @@ -0,0 +1,221 @@ +# makefile for libpng, HPUX (10.20 and 11.00) using the ANSI/C product. +# Copyright (C) 1999-2002, 2006, 2010-2011 Glenn Randers-Pehrson +# Copyright (C) 1995 Guy Eric Schalnat, Group 42 +# contributed by Jim Rice and updated by Chris Schleicher, Hewlett Packard +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Where the zlib library and include files are located +ZLIBLIB=/opt/zlib/lib +ZLIBINC=/opt/zlib/include + +# Note that if you plan to build a libpng shared library, zlib must also +# be a shared library, which zlib's configure does not do. After running +# zlib's configure, edit the appropriate lines of makefile to read: +# CFLAGS=-O1 -DHAVE_UNISTD -DUSE_MAP -fPIC \ +# LDSHARED=ld -b +# SHAREDLIB=libz.sl + +# Library name: +LIBNAME = libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).sl +LIBSOMAJ=$(LIBNAME).sl.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.sl + +# Utilities: +AR_RC=ar rc +CC=cc +MKDIR_P=mkdir -p +LN_SF=ln -sf +RANLIB=ranlib +RM_F=/bin/rm -f + +# where make install puts libpng.a, libpng16.sl, and png.h +prefix=/opt/libpng +exec_prefix=$(prefix) +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +CFLAGS=-I$(ZLIBINC) -O -Ae +DA1.1 +DS2.0 +# Caution: be sure you have built zlib with the same CFLAGS. +CCFLAGS=-I$(ZLIBINC) -O -Ae +DA1.1 +DS2.0 +LDFLAGS=-L. -L$(ZLIBLIB) -lpng -lz -lm + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) +z -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo ccopts=\"-Ae +DA1.1 +DS2.0\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) + $(LD) -b +s \ + +h $(LIBSOMAJ) -o $(LIBSOMAJ) $(OBJSDLL) + +pngtest: pngtest.o libpng.a + $(CC) -o pngtest $(CCFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) $(CCFLAGS) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtestd pngtest.png + +test-installed: + echo + echo Testing installed dynamic shared library. + $(CC) $(CCFLAGS) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(ZLIBLIB) \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngtesti pngout.png \ + libpng-config $(LIBSO) $(LIBSOMAJ)* \ + libpng.pc pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.ibmc b/src/SDL2/external/libpng-1.6.2/scripts/makefile.ibmc new file mode 100644 index 000000000..a19090dfe --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.ibmc @@ -0,0 +1,82 @@ +# Makefile for libpng (static) +# IBM C version 3.x for Win32 and OS/2 +# Copyright (C) 2006 Glenn Randers-Pehrson +# Copyright (C) 2000 Cosmin Truta +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h +# +# Notes: +# Derived from makefile.std +# All modules are compiled in C mode +# Tested under Win32, expected to work under OS/2 +# Can be easily adapted for IBM VisualAge/C++ for AIX + +# Location of the zlib library and include files +ZLIBINC = ../zlib +ZLIBLIB = ../zlib + +# Compiler, linker, lib and other tools +CC = icc +LD = ilink +AR = ilib +RM = del + +CFLAGS = -I$(ZLIBINC) -Mc -O2 -W3 +LDFLAGS = + +# File extensions +O=.obj +A=.lib +E=.exe + +# Variables +OBJS = png$(O) pngerror$(O) pngget$(O) pngmem$(O) pngpread$(O) \ + pngread$(O) pngrio$(O) pngrtran$(O) pngrutil$(O) pngset$(O) \ + pngtrans$(O) pngwio$(O) pngwrite$(O) pngwtran$(O) pngwutil$(O) + +LIBS = libpng$(A) $(ZLIBLIB)/zlib$(A) + +# Targets +all: libpng$(A) pngtest$(E) + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng$(A): $(OBJS) + $(AR) -out:$@ $(OBJS) + +test: pngtest$(E) + pngtest$(E) + +pngtest: pngtest$(E) + +pngtest$(E): pngtest$(O) libpng$(A) + $(LD) $(LDFLAGS) pngtest$(O) $(LIBS) + +clean: + $(RM) *$(O) + $(RM) libpng$(A) + $(RM) pnglibconf.h + $(RM) pngtest$(E) + $(RM) pngout.png + +png$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest$(O): png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.intel b/src/SDL2/external/libpng-1.6.2/scripts/makefile.intel new file mode 100644 index 000000000..3a45014cf --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.intel @@ -0,0 +1,110 @@ +# Makefile for libpng +# Microsoft Visual C++ with Intel C/C++ Compiler 4.0 and later + +# Copyright (C) 2006 Glenn Randers-Pehrson +# Copyright (C) 2000, Pawel Mrochen, based on makefile.msc which is +# copyright 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h +# +# To use, do "nmake /f scripts\makefile.intel" +# +# ------------------- Intel C/C++ Compiler 4.0 and later ------------------- + +# Where the zlib library and include files are located +ZLIBLIB=..\zlib +ZLIBINC=..\zlib + +# Target CPU +CPU=6 # Pentium II +#CPU=5 # Pentium + +# Calling convention +CALLING=r # __fastcall +#CALLING=z # __stdcall +#CALLING=d # __cdecl + +# Uncomment next to put error messages in a file +#ERRFILE=>>pngerrs + +# -------------------------------------------------------------------------- + +CC=icl -c +CFLAGS=-O2 -G$(CPU)$(CALLING) -Qip -Qunroll4 -I$(ZLIBINC) -nologo +LD=link +LDFLAGS=/SUBSYSTEM:CONSOLE /NOLOGO + +O=.obj + +OBJS=png$(O) pngset$(O) pngget$(O) pngrutil$(O) pngtrans$(O) pngwutil$(O) \ +pngmem$(O) pngpread$(O) pngread$(O) pngerror$(O) pngwrite$(O) \ +pngrtran$(O) pngwtran$(O) pngrio$(O) pngwio$(O) + +all: test + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +png$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngset$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngget$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngpread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngrtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngrutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngerror$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngmem$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngrio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngwio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngtrans$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngwrite$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngwtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +pngwutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +libpng.lib: $(OBJS) + if exist libpng.lib del libpng.lib + lib /NOLOGO /OUT:libpng.lib $(OBJS) + +pngtest.exe: pngtest.obj libpng.lib + $(LD) $(LDFLAGS) /OUT:pngtest.exe pngtest.obj libpng.lib $(ZLIBLIB)\zlib.lib + +pngtest$(O): png.h pngconf.h pnglibconf.h + $(CC) $(CFLAGS) $*.c $(ERRFILE) + +test: pngtest.exe + pngtest.exe + + +# End of makefile for libpng diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.knr b/src/SDL2/external/libpng-1.6.2/scripts/makefile.knr new file mode 100644 index 000000000..e2d2d4e59 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.knr @@ -0,0 +1,109 @@ +# makefile for libpng +# Copyright (C) 2002, 2006, 2009 Glenn Randers-Pehrson +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h +# +# This makefile requires the file ansi2knr.c, which you can get +# from the Ghostscript ftp site at ftp://ftp.cs.wisc.edu/ghost/ +# If you have libjpeg, you probably already have ansi2knr.c in the jpeg +# source distribution. + +# where make install puts libpng.a and png.h +prefix=/usr/local +INCPATH=$(prefix)/include +LIBPATH=$(prefix)/lib + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +CC=cc +CFLAGS=-I../zlib -O +LDFLAGS=-L. -L../zlib/ -lpng -lz -lm +# flags for ansi2knr +ANSI2KNRFLAGS= + +RANLIB=ranlib +#RANLIB=echo + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +all: ansi2knr libpng.a pngtest + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +# general rule to allow ansi2knr to work +.c.o: + ./ansi2knr $*.c T$*.c + $(CC) $(CFLAGS) -c T$*.c + rm -f T$*.c $*.o + mv T$*.o $*.o + +ansi2knr: ansi2knr.c + $(CC) $(CFLAGS) $(ANSI2KNRFLAGS) -o ansi2knr ansi2knr.c + +libpng.a: ansi2knr $(OBJS) + ar rc $@ $(OBJS) + $(RANLIB) $@ + +pngtest: pngtest.o libpng.a + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install: libpng.a png.h pngconf.h pnglibconf.h + -@mkdir $(DESTDIR)$(INCPATH) + -@mkdir $(DESTDIR)$(INCPATH)/libpng + -@mkdir $(DESTDIR)$(LIBPATH) + -@rm -f $(DESTDIR)$(INCPATH)/png.h + -@rm -f $(DESTDIR)$(INCPATH)/pngconf.h + cp png.h $(DESTDIR)$(INCPATH)/libpng + cp pngconf.h $(DESTDIR)$(INCPATH)/libpng + cp pnglibconf.h $(DESTDIR)$(INCPATH)/libpng + chmod 644 $(DESTDIR)$(INCPATH)/libpng/png.h + chmod 644 $(DESTDIR)$(INCPATH)/libpng/pngconf.h + chmod 644 $(DESTDIR)$(INCPATH)/libpng/pnglibconf.h + (cd $(DESTDIR)$(INCPATH); ln -f -s libpng/* .) + cp libpng.a $(DESTDIR)$(LIBPATH) + chmod 644 $(DESTDIR)$(LIBPATH)/libpng.a + +clean: + rm -f *.o libpng.a pngtest pngout.png ansi2knr pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.linux b/src/SDL2/external/libpng-1.6.2/scripts/makefile.linux new file mode 100644 index 000000000..3a13f0c37 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.linux @@ -0,0 +1,239 @@ +# makefile for libpng.a and libpng16.so on Linux ELF with gcc +# Copyright (C) 1998, 1999, 2002, 2006, 2008, 2010-2011 Greg Roelofs and +# Glenn Randers-Pehrson +# Copyright (C) 1996, 1997 Andreas Dilger +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Library name: +LIBNAME = libpng16 +PNGMAJ = 16 +RELEASE = 2 + +# Shared library names: +LIBSO=$(LIBNAME).so +LIBSOMAJ=$(LIBNAME).so.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.so + +# Utilities: +AR_RC=ar rc +CC=gcc +MKDIR_P=mkdir -p +LN_SF=ln -sf +RANLIB=ranlib +RM_F=/bin/rm -f + +# where "make install" puts libpng16.a, libpng16.so*, +# libpng16/png.h, libpng16/pngconf.h, and libpng16/pnglibconf.h +# Prefix must be a full pathname. +prefix=/usr/local +exec_prefix=$(prefix) + +# Where the zlib library and include files are located. +#ZLIBLIB=/usr/local/lib +#ZLIBINC=/usr/local/include +ZLIBLIB=../zlib +ZLIBINC=../zlib + +ALIGN= +# for i386: +#ALIGN=-malign-loops=2 -malign-functions=2 + +WARNMORE=-Wwrite-strings -Wpointer-arith -Wshadow \ + -Wmissing-declarations -Wtraditional -Wcast-align \ + -Wstrict-prototypes -Wmissing-prototypes #-Wconversion + +# for pgcc version 2.95.1, -O3 is buggy; don't use it. + +CFLAGS=-I$(ZLIBINC) -W -Wall -O3 -funroll-loops \ + $(ALIGN) # $(WARNMORE) -g -DPNG_DEBUG=5 + +LDFLAGS=-L. -Wl,-rpath,. -L$(ZLIBLIB) -Wl,-rpath,$(ZLIBLIB) -lpng16 -lz -lm +LDFLAGS_A=-L$(ZLIBLIB) -Wl,-rpath,$(ZLIBLIB) libpng.a -lz -lm + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) -fPIC -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest pngtest-static libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo R_opts=\"-Wl,-rpath,$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) + $(CC) -shared -Wl,-soname,$(LIBSOMAJ) -o $(LIBSOMAJ) $(OBJSDLL) + +pngtest: pngtest.o $(LIBSO) + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +pngtest-static: pngtest.o libpng.a + $(CC) -o pngtest-static $(CFLAGS) pngtest.o $(LDFLAGS_A) + +test: pngtest pngtest-static + @echo "" + @echo " Running pngtest dynamically linked with $(LIBSO):" + @echo "" + ./pngtest + @echo "" + @echo " Running pngtest statically linked with libpng.a:" + @echo "" + ./pngtest-static + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) -Wl, -rpath,$(DL) -Wl,-rpath,$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtestd pngtest.png + +test-installed: + $(CC) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(ZLIBLIB) -Wl,-rpath,$(ZLIBLIB) \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngout.png libpng-config \ + $(LIBSO) $(LIBSOMAJ)* pngtest-static pngtesti \ + libpng.pc pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o png.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o pngerror.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o pngrio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o pngwio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o pngmem.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o pngset.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o pngget.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o pngread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o pngrtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o pngrutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o pngtrans.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o pngwrite.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o pngwtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o pngwutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o pngpread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.mips b/src/SDL2/external/libpng-1.6.2/scripts/makefile.mips new file mode 100644 index 000000000..d6a5cc31b --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.mips @@ -0,0 +1,94 @@ +# makefile for libpng +# Copyright (C) Glenn Randers-Pehrson +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# where make install puts libpng.a and png.h +prefix=/usr/local +INCPATH=$(prefix)/include +LIBPATH=$(prefix)/lib + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +CC=cc +CFLAGS=-I../zlib -O -systype sysv -DSYSV -w -Dmips +#CFLAGS=-O +LDFLAGS=-L. -L../zlib/ -lpng -lz -lm + +#RANLIB=ranlib +RANLIB=echo + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +all: libpng.a pngtest + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + ar rc $@ $(OBJS) + $(RANLIB) $@ + +pngtest: pngtest.o libpng.a + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install: libpng.a + -@mkdir $(DESTDIR)$(INCPATH) + -@mkdir $(DESTDIR)$(INCPATH)/libpng + -@mkdir $(DESTDIR)$(LIBPATH) + -@rm -f $(DESTDIR)$(INCPATH)/png.h + -@rm -f $(DESTDIR)$(INCPATH)/pngconf.h + -@rm -f $(DESTDIR)$(INCPATH)/pnglibconf.h + cp png.h $(DESTDIR)$(INCPATH)/libpng + cp pngconf.h $(DESTDIR)$(INCPATH)/libpng + cp pnglibconf.h $(DESTDIR)$(INCPATH)/libpng + chmod 644 $(DESTDIR)$(INCPATH)/libpng/png.h + chmod 644 $(DESTDIR)$(INCPATH)/libpng/pngconf.h + chmod 644 $(DESTDIR)$(INCPATH)/libpng/pnglibconf.h + (cd $(DESTDIR)$(INCPATH); ln -f -s libpng/* .) + cp libpng.a $(DESTDIR)$(LIBPATH) + chmod 644 $(DESTDIR)$(LIBPATH)/libpng.a + +clean: + rm -f *.o libpng.a pngtest pngout.png pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.msc b/src/SDL2/external/libpng-1.6.2/scripts/makefile.msc new file mode 100644 index 000000000..e3ad73e75 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.msc @@ -0,0 +1,95 @@ +# makefile for libpng +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# Copyright (C) 2006, 2009 Glenn Randers-Pehrson +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h +# +# Assumes that zlib.lib, zconf.h, and zlib.h have been copied to ..\zlib + +# -------- Microsoft C 5.1 and later, does not use assembler code -------- +MODEL=L +CFLAGS=-Oait -Gs -nologo -W3 -A$(MODEL) -I..\zlib +#-Ox generates bad code with MSC 5.1 +CC=cl +LD=link +LDFLAGS=/e/st:0x1500/noe +O=.obj + +#uncomment next to put error messages in a file +ERRFILE= >> pngerrs + +# variables +OBJS1 = png$(O) pngset$(O) pngget$(O) pngrutil$(O) pngtrans$(O) pngwutil$(O) +OBJS2 = pngmem$(O) pngpread$(O) pngread$(O) pngerror$(O) pngwrite$(O) +OBJS3 = pngrtran$(O) pngwtran$(O) pngrio$(O) pngwio$(O) + +all: libpng.lib + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +png$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngset$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngget$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngpread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngrtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngrutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngerror$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngmem$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngrio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngwio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngtrans$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngwrite$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngwtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngwutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +libpng.lib: $(OBJS1) $(OBJS2) $(OBJS3) + del libpng.lib + lib libpng $(OBJS1); + lib libpng $(OBJS2); + lib libpng $(OBJS3); + +pngtest$(O): png.h pngconf.h pnglibconf.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngtest.exe: pngtest.obj libpng.lib + $(LD) $(LDFLAGS) pngtest.obj,,,libpng.lib ..\zlib\zlib.lib ; + +test: pngtest.exe + pngtest + +# End of makefile for libpng + diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.msys b/src/SDL2/external/libpng-1.6.2/scripts/makefile.msys new file mode 100644 index 000000000..fc76184b4 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.msys @@ -0,0 +1,204 @@ +# makefile for libpng using MSYS/gcc (shared, static library) +# Copyright (C) 2012 Glenn Randers-Pehrson and Christopher M. Wheeler +# +# Portions taken from makefile.linux: +# Copyright (C) 1998, 1999, 2002, 2006, 2008, 2010-2011 Greg Roelofs and +# Glenn Randers-Pehrson +# Copyright (C) 2000 Cosmin Truta +# Copyright (C) 1996, 1997 Andreas Dilger +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h +# # # # # # # # # # # # # # # # # +prefix=/usr/local +exec_prefix=$(prefix) + +# Library name: +LIBNAME = libpng16 +PNGMAJ = 16 +RELEASE = 2 + +# Shared library names: +LIBSO=$(LIBNAME).dll +LIBSOMAJ=$(LIBNAME).dll.$(PNGMAJ) +LIBSOREL=$(PNGMAJ).$(RELEASE) +OLDSO=libpng.dll + +# Where the zlib library and include files are located. +#ZLIBLIB=../zlib +#ZLIBINC=../zlib +ZLIBLIB=/usr/local/lib +ZLIBINC=/usr/local/include + +# Compiler, linker, lib and other tools +CC = gcc +LD = $(CC) +AR_RC = ar rcs +RANLIB = ranlib +RM_F = rm -rf +MKDIR_P=mkdir -p +LN_SF=ln -sf + +#ARCH = -march=pentium3 +#ARCH = -march=i686 +ARCH = +CDEBUG = -g -DPNG_DEBUG=5 +LDDEBUG = +CRELEASE = -O2 +LDRELEASE = -s +#CFLAGS = -W -Wall $(CDEBUG) +CFLAGS = -W -Wall $(CRELEASE) $(ARCH) +#LDFLAGS = $(LDDEBUG) +LDFLAGS = $(LDRELEASE) +LIBS = -lz -lm + +# File extensions +O=.o +A=.a +EXE=.exe + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. + +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +# Variables +OBJS = png$(O) pngerror$(O) pngget$(O) pngmem$(O) pngpread$(O) \ + pngread$(O) pngrio$(O) pngrtran$(O) pngrutil$(O) pngset$(O) \ + pngtrans$(O) pngwio$(O) pngwrite$(O) pngwtran$(O) pngwutil$(O) + +# Targets +all: static shared + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +.c$(O): + $(CC) -c $(CFLAGS) -I$(ZLIBINC) $< + +static: libpng$(A) pngtest$(EXE) + +shared: $(LIBSOMAJ) + $(CC) -shared -Wl,-soname,$(LIBSOMAJ) -o $(LIBSO) + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): + $(CC) -shared -Wl,-soname,$(LIBSOMAJ) -o $(LIBSOMAJ) + +libpng$(A): $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo R_opts=\"-Wl,-rpath,$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSO) $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +test: pngtest$(EXE) + ./pngtest$(EXE) + +pngtest$(EXE): pngtest$(O) libpng$(A) + $(LD) $(LDFLAGS) -L$(ZLIBLIB) -o $@ pngtest$(O) libpng$(A) $(LIBS) + +clean: + $(RM_F) *$(O) libpng$(A) pngtest$(EXE) pngout.png pnglibconf.h $(LIBSO) \ + $(LIBSOMAJ) libpng-config + +png$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest$(O): png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.ne12bsd b/src/SDL2/external/libpng-1.6.2/scripts/makefile.ne12bsd new file mode 100644 index 000000000..086decf1a --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.ne12bsd @@ -0,0 +1,50 @@ +# makefile for libpng for NetBSD for the standard +# make obj && make depend && make && make test +# make includes && make install +# Copyright (C) 2002 Patrick R.L. Welche +# Copyright (C) 2007, 2009 Glenn Randers-Pehrson +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# You should also run makefile.netbsd + +LOCALBASE?=/usr/local +LIBDIR= ${LOCALBASE}/lib +MANDIR= ${LOCALBASE}/man +INCSDIR=${LOCALBASE}/include/libpng16 + +LIB= png16 +SHLIB_MAJOR= 0 +SHLIB_MINOR= 1.6.2 +SRCS= png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \ + pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \ + pngwtran.c pngmem.c pngerror.c pngpread.c +INCS= png.h pngconf.h pnglibconf.h +MAN= libpng.3 libpngpf.3 png.5 + +CPPFLAGS+=-I${.CURDIR} + +# We should be able to do something like this instead of the manual +# uncommenting, but it core dumps for me at the moment: +# .if ${MACHINE_ARCH} == "i386" +# MKLINT= no +# .endif + +CLEANFILES+=pngtest.o pngtest pnglibconf.h + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +pngtest.o: pngtest.c + ${CC} -c ${CPPFLAGS} ${CFLAGS} ${.ALLSRC} -o ${.TARGET} + +pngtest: pngtest.o libpng.a + ${CC} ${LDFLAGS} ${.ALLSRC} -o${.TARGET} -lz -lm + +test: pngtest + cd ${.CURDIR} && ${.OBJDIR}/pngtest + +.include diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.netbsd b/src/SDL2/external/libpng-1.6.2/scripts/makefile.netbsd new file mode 100644 index 000000000..04ddf6d0d --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.netbsd @@ -0,0 +1,50 @@ +# makefile for libpng for NetBSD for the standard +# make obj && make depend && make && make test +# make includes && make install +# Copyright (C) 2002 Patrick R.L. Welche +# Copyright (C) 2007-2009 Glenn Randers-Pehrson +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# You should also run makefile.ne16bsd + +LOCALBASE?=/usr/local +LIBDIR= ${LOCALBASE}/lib +MANDIR= ${LOCALBASE}/man +INCSDIR=${LOCALBASE}/include + +LIB= png +SHLIB_MAJOR= 16 +SHLIB_MINOR= 1.6.2 +SRCS= png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \ + pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \ + pngwtran.c pngmem.c pngerror.c pngpread.c +INCS= png.h pngconf.h pnglibconf.h +MAN= libpng.3 libpngpf.3 png.5 + +CPPFLAGS+=-I${.CURDIR} + +# We should be able to do something like this instead of the manual +# uncommenting, but it core dumps for me at the moment: +# .if ${MACHINE_ARCH} == "i386" +# MKLINT= no +# .endif + +CLEANFILES+=pngtest.o pngtest pnglibconf.h + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +pngtest.o: pngtest.c + ${CC} -c ${CPPFLAGS} ${CFLAGS} ${.ALLSRC} -o ${.TARGET} + +pngtest: pngtest.o libpng.a + ${CC} ${LDFLAGS} ${.ALLSRC} -o${.TARGET} -lz -lm + +test: pngtest + cd ${.CURDIR} && ${.OBJDIR}/pngtest + +.include diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.openbsd b/src/SDL2/external/libpng-1.6.2/scripts/makefile.openbsd new file mode 100644 index 000000000..60265589c --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.openbsd @@ -0,0 +1,82 @@ +# makefile for libpng +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# Copyright (C) 2007-2009 Glenn Randers-Pehrson +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +PREFIX?= /usr/local +LIBDIR= ${PREFIX}/lib +MANDIR= ${PREFIX}/man/cat + +SHLIB_MAJOR= 16 +SHLIB_MINOR= 1.6.2 + +LIB= png +SRCS= png.c pngerror.c pngget.c pngmem.c pngpread.c \ + pngread.c pngrio.c pngrtran.c pngrutil.c pngset.c pngtrans.c \ + pngwio.c pngwrite.c pngwtran.c pngwutil.c + +HDRS= png.h pngconf.h pnglibconf.h + +CFLAGS+= -W -Wall +CPPFLAGS+= -I${.CURDIR} + +NOPROFILE= Yes + +CLEANFILES+= pngtest.o pngtest pnglibconf.h + +MAN= libpng.3 libpngpf.3 png.5 +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO \ + libpng-manual.txt + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +pngtest.o: pngtest.c + ${CC} ${CPPFLAGS} ${CFLAGS} -c ${.ALLSRC} -o ${.TARGET} + +pngtest: pngtest.o + ${CC} ${LDFLAGS} ${.ALLSRC} -o ${.TARGET} -L${.OBJDIR} -lpng -lz -lm + +test: pngtest + cd ${.OBJDIR} && env \ + LD_LIBRARY_PATH="${.OBJDIR}" ${.OBJDIR}/pngtest + +beforeinstall: + if [ ! -d ${DESTDIR}${PREFIX}/include/libpng ]; then \ + ${INSTALL} -d -o root -g wheel ${DESTDIR}${PREFIX}/include; \ + fi + if [ ! -d ${DESTDIR}${LIBDIR} ]; then \ + ${INSTALL} -d -o root -g wheel ${DESTDIR}${LIBDIR}; \ + fi + if [ ! -d ${DESTDIR}${LIBDIR}/debug ]; then \ + ${INSTALL} -d -o root -g wheel ${DESTDIR}${LIBDIR}/debug; \ + fi + if [ ! -d ${DESTDIR}${MANDIR}3 ]; then \ + ${INSTALL} -d -o root -g wheel ${DESTDIR}${MANDIR}3; \ + fi + if [ ! -d ${DESTDIR}${MANDIR}5 ]; then \ + ${INSTALL} -d -o root -g wheel ${DESTDIR}${MANDIR}5; \ + fi + if [ ! -d ${DESTDIR}${PREFIX}/share/doc/png ]; then \ + ${INSTALL} -d -o root -g wheel ${DESTDIR}${PREFIX}/share/doc/png; \ + fi + +afterinstall: + @rm -f ${DESTDIR}${LIBDIR}/libpng_pic.a + @rm -f ${DESTDIR}${LIBDIR}/debug/libpng.a + @rm -f ${DESTDIR}${PREFIX}/include/png.h + @rm -f ${DESTDIR}${PREFIX}/include/pngconf.h + @rm -f ${DESTDIR}${PREFIX}/include/pnglibconf.h + @rmdir ${DESTDIR}${LIBDIR}/debug 2>/dev/null || true + ${INSTALL} ${INSTALL_COPY} -o ${SHAREOWN} -g ${SHAREGRP} \ + -m ${NONBINMODE} ${HDRS} ${DESTDIR}${PREFIX}/include + ${INSTALL} ${INSTALL_COPY} -o ${SHAREOWN} -g ${SHAREGRP} \ + -m ${NONBINMODE} ${HDRS} ${DESTDIR}${PREFIX}/include + ${INSTALL} ${INSTALL_COPY} -o ${SHAREOWN} -g ${SHAREGRP} \ + -m ${NONBINMODE} ${DOCS} ${DESTDIR}${PREFIX}/share/doc/png + +.include diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.sco b/src/SDL2/external/libpng-1.6.2/scripts/makefile.sco new file mode 100644 index 000000000..c5f254f6e --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.sco @@ -0,0 +1,218 @@ +# makefile for SCO OSr5 ELF and Unixware 7 with Native cc +# Contributed by Mike Hopkirk (hops@sco.com) modified from Makefile.lnx +# force ELF build dynamic linking, SONAME setting in lib and RPATH in app +# Copyright (C) 2002, 2006, 2010-2011 Glenn Randers-Pehrson +# Copyright (C) 1998 Greg Roelofs +# Copyright (C) 1996, 1997 Andreas Dilger +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Library name: +LIBNAME = libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).so +LIBSOMAJ=$(LIBNAME).so.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.so + +# Utilities: +CC=cc +AR_RC=ar rc +MKDIR_P=mkdir +LN_SF=ln -f -s +RANLIB=echo +RM_F=/bin/rm -f + +# where make install puts libpng.a, $(OLDSO)*, and png.h +prefix=/usr/local +exec_prefix=$(prefix) + +# Where the zlib library and include files are located +#ZLIBLIB=/usr/local/lib +#ZLIBINC=/usr/local/include +ZLIBLIB=../zlib +ZLIBINC=../zlib + +CFLAGS= -dy -belf -I$(ZLIBINC) -O3 +LDFLAGS=-L. -L$(ZLIBLIB) -lpng16 -lz -lm + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) -KPIC -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo ccopts=\"-belf\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) + $(CC) -G -Wl,-h,$(LIBSOMAJ) -o $(LIBSOMAJ) \ + $(OBJSDLL) + +pngtest: pngtest.o $(LIBSO) + LD_RUN_PATH=.:$(ZLIBLIB) $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + -@$(RM_F) $(DI)/png.h + -@$(RM_F) $(DI)/pngconf.h + -@$(RM_F) $(DI)/pnglibconf.h + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) $(CFLAGS) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtestd pngtest.png + +test-installed: + $(CC) $(CFLAGS) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(ZLIBLIB) \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngout.png libpng-config \ + $(LIBSO) $(LIBSOMAJ)* pngtest-static pngtesti \ + pnglibconf.h libpng.pc + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o png.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o pngerror.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o pngrio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o pngwio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o pngmem.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o pngset.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o pngget.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o pngread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o pngrtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o pngrutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o pngtrans.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o pngwrite.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o pngwtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o pngwutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o pngpread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.sggcc b/src/SDL2/external/libpng-1.6.2/scripts/makefile.sggcc new file mode 100644 index 000000000..7c427bea6 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.sggcc @@ -0,0 +1,228 @@ +# makefile for libpng.a and libpng16.so, SGI IRIX with 'cc' +# Copyright (C) 2001-2002, 2006, 2010-2011 Glenn Randers-Pehrson +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Library name: +LIBNAME=libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).so +LIBSOMAJ=$(LIBNAME).so.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.so + +# Utilities: +AR_RC=ar rc +CC=gcc +MKDIR_P=mkdir -p +LN_SF=ln -sf +RANLIB=echo +RM_F=/bin/rm -f + +# Where make install puts libpng.a, libpng16.so, and libpng16/png.h +# Prefix must be a full pathname. + +prefix=/usr/local +exec_prefix=$(prefix) + +# Where the zlib library and include files are located +#ZLIBLIB=/usr/local/lib32 +#ZLIBINC=/usr/local/include +#ZLIBLIB=/usr/local/lib +#ZLIBINC=/usr/local/include +ZLIBLIB=../zlib +ZLIBINC=../zlib + +# ABI can be blank to use default for your system, -32, -o32, -n32, or -64 +# See "man abi". zlib must be built with the same ABI. +ABI= + +WARNMORE= # -g -DPNG_DEBUG=5 +CFLAGS=$(ABI) -I$(ZLIBINC) -O $(WARNMORE) -fPIC -mabi=n32 +LDFLAGS=$(ABI) -L. -L$(ZLIBLIB) -lpng -lz -lm +LDSHARED=cc $(ABI) -shared -soname $(LIBSOMAJ) \ + -set_version sgi$(PNGMAJ).0 +# See "man dso" for info about shared objects + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +#LIBPATH=$(exec_prefix)/lib32 +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +all: libpng.a pngtest shared libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +shared: $(LIBSOMAJ) + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo ccopts=\"$(ABI)\"; \ + echo cppflags=\"\"; \ + echo ldopts=\"$(ABI)\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo libdir=\"$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJS) + $(LDSHARED) -o $@ $(OBJS) + $(RM_F) $(LIBSO) $(LIBSOMAJ) + +pngtest: pngtest.o libpng.a + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + echo + echo Testing local static library. + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -rpath $(ZLIBLIB):$(DL) \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtestd pngtest.png + +test-installed: + echo + echo Testing installed dynamic shared library. + $(CC) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(ZLIBLIB) \ + -rpath $(ZLIBLIB):`$(BINPATH)/$(LIBNAME)-config --libdir` \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtesti pngtest.png + +clean: + $(RM_F) libpng.a pngtest pngtesti pngout.png libpng.pc \ + so_locations libpng-config $(LIBSO) $(LIBSOMAJ)* pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.sgi b/src/SDL2/external/libpng-1.6.2/scripts/makefile.sgi new file mode 100644 index 000000000..f40461e33 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.sgi @@ -0,0 +1,229 @@ +# makefile for libpng.a and libpng16.so, SGI IRIX with 'cc' +# Copyright (C) 2001-2002, 2006, 2007, 2010-2011 Glenn Randers-Pehrson +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Library name: +LIBNAME=libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).so +LIBSOMAJ=$(LIBNAME).so.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.so + +# Utilities: +AR_RC=ar rc +CC=cc +MKDIR_P=mkdir -p +LN_SF=ln -sf +RANLIB=echo +RM_F=/bin/rm -f + +# Where make install puts libpng.a, libpng16.so, and libpng16/png.h +# Prefix must be a full pathname. + +prefix=/usr/local +exec_prefix=$(prefix) + +# Where the zlib library and include files are located +#ZLIBLIB=/usr/local/lib32 +#ZLIBINC=/usr/local/include +#ZLIBLIB=/usr/local/lib +#ZLIBINC=/usr/local/include +ZLIBLIB=../zlib +ZLIBINC=../zlib + +# ABI can be blank to use default for your system, -32, -o32, -n32, or -64 +# See "man abi". zlib must be built with the same ABI. +ABI= + +WARNMORE=-fullwarn +# Note: -KPIC is the default anyhow +#CFLAGS= $(ABI) -I$(ZLIBINC) -O $(WARNMORE) -KPIC # -g -DPNG_DEBUG=5 +CFLAGS=$(ABI) -I$(ZLIBINC) -O $(WARNMORE) +LDFLAGS_A=$(ABI) -L. -L$(ZLIBLIB) -lpng16 -lz -lm +LDFLAGS=$(ABI) -L. -L$(ZLIBLIB) -lpng -lz -lm +LDSHARED=cc $(ABI) -shared -soname $(LIBSOMAJ) \ + -set_version sgi$(PNGMAJ).0 +# See "man dso" for info about shared objects + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +#LIBPATH=$(exec_prefix)/lib32 +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +all: libpng.a pngtest shared libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo ccopts=\"$(ABI)\"; \ + echo ldopts=\"$(ABI)\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo libdir=\"$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJS) + $(LDSHARED) -o $@ $(OBJS) + $(RM_F) $(LIBSO) $(LIBSOMAJ) + +pngtest: pngtest.o libpng.a + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + echo + echo Testing local static library. + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(DL) -L$(ZLIBLIB) \ + -rpath $(ZLIBLIB):$(DL) \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtestd pngtest.png + +test-installed: + echo + echo Testing installed dynamic shared library. + $(CC) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -L$(ZLIBLIB) \ + -rpath $(ZLIBLIB):`$(BINPATH)/$(LIBNAME)-config --libdir` \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngtesti pngout.png libpng.pc libpng-config \ + $(LIBSO) $(LIBSOMAJ)* \ + so_locations pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.so9 b/src/SDL2/external/libpng-1.6.2/scripts/makefile.so9 new file mode 100644 index 000000000..a7773d183 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.so9 @@ -0,0 +1,239 @@ +# makefile for libpng on Solaris 9 (beta) with Forte cc +# Updated by Chad Schrock for Solaris 9 +# Contributed by William L. Sebok, based on makefile.linux +# Copyright (C) 2002, 2006, 2008, 2010-2011 Glenn Randers-Pehrson +# Copyright (C) 1998-2001 Greg Roelofs +# Copyright (C) 1996-1997 Andreas Dilger +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Library name: +PNGMAJ = 16 +LIBNAME = libpng16 + +# Shared library names: +LIBSO=$(LIBNAME).so +LIBSOMAJ=$(LIBNAME).so.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.so + +# Utilities: +# gcc 2.95 doesn't work. +CC=cc +AR_RC=ar rc +MKDIR_P=mkdir -p +LN_SF=ln -f -s +RANLIB=echo +RM_F=/bin/rm -f + +# Where make install puts libpng.a, $(OLDSO)*, and png.h +prefix=/usr/local +exec_prefix=$(prefix) + +# Where the zlib library and include files are located +# Changing these to ../zlib poses a security risk. If you want +# to have zlib in an adjacent directory, specify the full path instead of "..". +#ZLIBLIB=../zlib +#ZLIBINC=../zlib +#ZLIBLIB=/usr/local/lib +#ZLIBINC=/usr/local/include +#Use the preinstalled zlib that comes with Solaris 9: +ZLIBLIB=/usr/lib +ZLIBINC=/usr/include + +#WARNMORE=-Wwrite-strings -Wpointer-arith -Wshadow \ + -Wmissing-declarations -Wtraditional -Wcast-align \ + -Wstrict-prototypes -Wmissing-prototypes #-Wconversion +#CFLAGS=-I$(ZLIBINC) -W -Wall -O3 $(WARNMORE) -g -DPNG_DEBUG=5 -DPNG_NO_MMX_CODE +CFLAGS=-I$(ZLIBINC) -O3 -DPNG_NO_MMX_CODE +LDFLAGS=-L. -R. -L$(ZLIBLIB) -R$(ZLIBLIB) -lpng16 -lz -lm + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) -KPIC -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo R_opts=\"-R$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) + @case "`type ld`" in *ucb*) \ + echo; \ + echo '## WARNING:'; \ + echo '## The commands "CC" and "LD" must NOT refer to /usr/ucb/cc'; \ + echo '## and /usr/ucb/ld. If they do, you need to adjust your PATH'; \ + echo '## environment variable to put /usr/ccs/bin ahead of /usr/ucb.'; \ + echo '## The environment variable LD_LIBRARY_PATH should not be set'; \ + echo '## at all. If it is, things are likely to break because of'; \ + echo '## the libucb dependency that is created.'; \ + echo; \ + ;; \ + esac + $(LD) -G -h $(LIBSOMAJ) \ + -o $(LIBSOMAJ) $(OBJSDLL) + +pngtest: pngtest.o $(LIBSO) + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` \ + -L$(DL) -L$(ZLIBLIB) -R$(ZLIBLIB) -R$(DL) + ./pngtestd pngtest.png + +test-installed: + echo + echo Testing installed dynamic shared library. + $(CC) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` \ + -L$(ZLIBLIB) -R$(ZLIBLIB) + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngtesti pngout.png \ + libpng-config $(LIBSO) $(LIBSOMAJ)* \ + libpng.pc pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o png.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o pngerror.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o pngrio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o pngwio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o pngmem.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o pngset.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o pngget.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o pngread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o pngrtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o pngrutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o pngtrans.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o pngwrite.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o pngwtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o pngwutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o pngpread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.solaris b/src/SDL2/external/libpng-1.6.2/scripts/makefile.solaris new file mode 100644 index 000000000..be423a184 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.solaris @@ -0,0 +1,236 @@ +# makefile for libpng on Solaris 2.x with gcc +# Copyright (C) 2004, 2006-2008, 2010-2011 Glenn Randers-Pehrson +# Contributed by William L. Sebok, based on makefile.linux +# Copyright (C) 1998 Greg Roelofs +# Copyright (C) 1996, 1997 Andreas Dilger +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Library name: +LIBNAME = libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).so +LIBSOMAJ=$(LIBNAME).so.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.so + +# Utilities: +AR_RC=ar rc +CC=gcc +MKDIR_P=mkdir -p +LN_SF=ln -f -s +RANLIB=echo +RM_F=/bin/rm -f + +# Where make install puts libpng.a, libpng16.so*, and png.h +prefix=/usr/local +exec_prefix=$(prefix) + +# Where the zlib library and include files are located +# Changing these to ../zlib poses a security risk. If you want +# to have zlib in an adjacent directory, specify the full path instead of "..". +#ZLIBLIB=../zlib +#ZLIBINC=../zlib + +ZLIBLIB=/usr/local/lib +ZLIBINC=/usr/local/include + +WARNMORE=-Wwrite-strings -Wpointer-arith -Wshadow \ + -Wmissing-declarations -Wtraditional -Wcast-align \ + -Wstrict-prototypes -Wmissing-prototypes #-Wconversion +CFLAGS=-I$(ZLIBINC) -W -Wall -O \ + # $(WARNMORE) -g -DPNG_DEBUG=5 +LDFLAGS=-L. -R. -L$(ZLIBLIB) -R$(ZLIBLIB) -lpng16 -lz -lm + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) -fPIC -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo cppflags=\"\"; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo R_opts=\"-R$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) + @case "`type ld`" in *ucb*) \ + echo; \ + echo '## WARNING:'; \ + echo '## The commands "CC" and "LD" must NOT refer to /usr/ucb/cc'; \ + echo '## and /usr/ucb/ld. If they do, you need to adjust your PATH'; \ + echo '## environment variable to put /usr/ccs/bin ahead of /usr/ucb.'; \ + echo '## The environment variable LD_LIBRARY_PATH should not be set'; \ + echo '## at all. If it is, things are likely to break because of'; \ + echo '## the libucb dependency that is created.'; \ + echo; \ + ;; \ + esac + $(LD) -G -h $(LIBSOMAJ) \ + -o $(LIBSOMAJ) $(OBJSDLL) + +pngtest: pngtest.o $(LIBSO) + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` \ + -L$(DL) -L$(ZLIBLIB) -R$(ZLIBLIB) -R$(DL) + ./pngtestd pngtest.png + +test-installed: + echo + echo Testing installed dynamic shared library. + $(CC) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` \ + -L$(ZLIBLIB) -R$(ZLIBLIB) + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngtesti pngout.png \ + libpng-config $(LIBSO) $(LIBSOMAJ)* \ + libpng.pc pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o png.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o pngerror.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o pngrio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o pngwio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o pngmem.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o pngset.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o pngget.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o pngread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o pngrtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o pngrutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o pngtrans.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o pngwrite.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o pngwtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o pngwutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o pngpread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.solaris-x86 b/src/SDL2/external/libpng-1.6.2/scripts/makefile.solaris-x86 new file mode 100644 index 000000000..d41e659c5 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.solaris-x86 @@ -0,0 +1,236 @@ +# makefile for libpng on Solaris 2.x with gcc +# Copyright (C) 2004, 2006-2008, 2010-2011 Glenn Randers-Pehrson +# Contributed by William L. Sebok, based on makefile.linux +# Copyright (C) 1998 Greg Roelofs +# Copyright (C) 1996, 1997 Andreas Dilger + +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# Library name: +LIBNAME = libpng16 +PNGMAJ = 16 + +# Shared library names: +LIBSO=$(LIBNAME).so +LIBSOMAJ=$(LIBNAME).so.$(PNGMAJ) +LIBSOREL=$(LIBSOMAJ).$(RELEASE) +OLDSO=libpng.so + +# Utilities: +AR_RC=ar rc +CC=gcc +MKDIR_P=mkdir -p +LN_SF=ln -f -s +RANLIB=echo +RM_F=/bin/rm -f + +# Where make install puts libpng.a, libpng16.so*, and png.h +prefix=/usr/local +exec_prefix=$(prefix) + +# Where the zlib library and include files are located +# Changing these to ../zlib poses a security risk. If you want +# to have zlib in an adjacent directory, specify the full path instead of "..". +#ZLIBLIB=../zlib +#ZLIBINC=../zlib + +ZLIBLIB=/usr/local/lib +ZLIBINC=/usr/local/include + +WARNMORE=-Wwrite-strings -Wpointer-arith -Wshadow \ + -Wmissing-declarations -Wtraditional -Wcast-align \ + -Wstrict-prototypes -Wmissing-prototypes #-Wconversion +CFLAGS=-I$(ZLIBINC) -W -Wall -O \ + # $(WARNMORE) -g -DPNG_DEBUG=5 +LDFLAGS=-L. -R. -L$(ZLIBLIB) -R$(ZLIBLIB) -lpng16 -lz -lm + +INCPATH=$(prefix)/include +LIBPATH=$(exec_prefix)/lib +MANPATH=$(prefix)/man +BINPATH=$(exec_prefix)/bin + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +DB=$(DESTDIR)$(BINPATH) +DI=$(DESTDIR)$(INCPATH) +DL=$(DESTDIR)$(LIBPATH) +DM=$(DESTDIR)$(MANPATH) + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +OBJSDLL = $(OBJS:.o=.pic.o) + +.SUFFIXES: .c .o .pic.o + +.c.pic.o: + $(CC) -c $(CFLAGS) -fPIC -o $@ $*.c + +all: libpng.a $(LIBSO) pngtest libpng.pc libpng-config + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +libpng.pc: + cat scripts/libpng.pc.in | sed -e s!@prefix@!$(prefix)! \ + -e s!@exec_prefix@!$(exec_prefix)! \ + -e s!@libdir@!$(LIBPATH)! \ + -e s!@includedir@!$(INCPATH)! \ + -e s!-lpng16!-lpng16\ -lz\ -lm! > libpng.pc + +libpng-config: + ( cat scripts/libpng-config-head.in; \ + echo prefix=\"$(prefix)\"; \ + echo I_opts=\"-I$(INCPATH)/$(LIBNAME)\"; \ + echo cppflags=\""; \ + echo L_opts=\"-L$(LIBPATH)\"; \ + echo R_opts=\"-R$(LIBPATH)\"; \ + echo libs=\"-lpng16 -lz -lm\"; \ + cat scripts/libpng-config-body.in ) > libpng-config + chmod +x libpng-config + +$(LIBSO): $(LIBSOMAJ) + $(LN_SF) $(LIBSOMAJ) $(LIBSO) + +$(LIBSOMAJ): $(OBJSDLL) + @case "`type ld`" in *ucb*) \ + echo; \ + echo '## WARNING:'; \ + echo '## The commands "CC" and "LD" must NOT refer to /usr/ucb/cc'; \ + echo '## and /usr/ucb/ld. If they do, you need to adjust your PATH'; \ + echo '## environment variable to put /usr/ccs/bin ahead of /usr/ucb.'; \ + echo '## The environment variable LD_LIBRARY_PATH should not be set'; \ + echo '## at all. If it is, things are likely to break because of'; \ + echo '## the libucb dependency that is created.'; \ + echo; \ + ;; \ + esac + $(LD) -G -h $(LIBSOMAJ) \ + -o $(LIBSOMAJ) $(OBJSDLL) + +pngtest: pngtest.o $(LIBSO) + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install-headers: png.h pngconf.h pnglibconf.h + -@if [ ! -d $(DI) ]; then $(MKDIR_P) $(DI); fi + -@if [ ! -d $(DI)/$(LIBNAME) ]; then $(MKDIR_P) $(DI)/$(LIBNAME); fi + cp png.h pngconf.h pnglibconf.h $(DI)/$(LIBNAME) + chmod 644 $(DI)/$(LIBNAME)/png.h $(DI)/$(LIBNAME)/pngconf.h $(DI)/$(LIBNAME)/pnglibconf.h + -@$(RM_F) $(DI)/png.h $(DI)/pngconf.h $(DI)/pnglibconf.h + -@$(RM_F) $(DI)/libpng + (cd $(DI); $(LN_SF) $(LIBNAME) libpng; $(LN_SF) $(LIBNAME)/* .) + +install-static: install-headers libpng.a + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + cp libpng.a $(DL)/$(LIBNAME).a + chmod 644 $(DL)/$(LIBNAME).a + -@$(RM_F) $(DL)/libpng.a + (cd $(DL); $(LN_SF) $(LIBNAME).a libpng.a) + +install-shared: install-headers $(LIBSOMAJ) libpng.pc + -@if [ ! -d $(DL) ]; then $(MKDIR_P) $(DL); fi + -@$(RM_F) $(DL)/$(LIBSO) + -@$(RM_F) $(DL)/$(LIBSOREL) + -@$(RM_F) $(DL)/$(OLDSO) + cp $(LIBSOMAJ) $(DL)/$(LIBSOREL) + chmod 755 $(DL)/$(LIBSOREL) + (cd $(DL); \ + $(LN_SF) $(LIBSOREL) $(LIBSO); \ + $(LN_SF) $(LIBSO) $(OLDSO)) + -@if [ ! -d $(DL)/pkgconfig ]; then $(MKDIR_P) $(DL)/pkgconfig; fi + -@$(RM_F) $(DL)/pkgconfig/$(LIBNAME).pc + -@$(RM_F) $(DL)/pkgconfig/libpng.pc + cp libpng.pc $(DL)/pkgconfig/$(LIBNAME).pc + chmod 644 $(DL)/pkgconfig/$(LIBNAME).pc + (cd $(DL)/pkgconfig; $(LN_SF) $(LIBNAME).pc libpng.pc) + +install-man: libpng.3 libpngpf.3 png.5 + -@if [ ! -d $(DM) ]; then $(MKDIR_P) $(DM); fi + -@if [ ! -d $(DM)/man3 ]; then $(MKDIR_P) $(DM)/man3; fi + -@$(RM_F) $(DM)/man3/libpng.3 + -@$(RM_F) $(DM)/man3/libpngpf.3 + cp libpng.3 $(DM)/man3 + cp libpngpf.3 $(DM)/man3 + -@if [ ! -d $(DM)/man5 ]; then $(MKDIR_P) $(DM)/man5; fi + -@$(RM_F) $(DM)/man5/png.5 + cp png.5 $(DM)/man5 + +install-config: libpng-config + -@if [ ! -d $(DB) ]; then $(MKDIR_P) $(DB); fi + -@$(RM_F) $(DB)/libpng-config + -@$(RM_F) $(DB)/$(LIBNAME)-config + cp libpng-config $(DB)/$(LIBNAME)-config + chmod 755 $(DB)/$(LIBNAME)-config + (cd $(DB); $(LN_SF) $(LIBNAME)-config libpng-config) + +install: install-static install-shared install-man install-config + +# If you installed in $(DESTDIR), test-installed won't work until you +# move the library to its final location. Use test-dd to test it +# before then. + +test-dd: + echo + echo Testing installed dynamic shared library in $(DL). + $(CC) -I$(DI) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -o pngtestd `$(BINPATH)/$(LIBNAME)-config --ldflags` \ + -L$(DL) -L$(ZLIBLIB) -R$(ZLIBLIB) -R$(DL) + ./pngtestd pngtest.png + +test-installed: + echo + echo Testing installed dynamic shared library. + $(CC) -I$(ZLIBINC) \ + `$(BINPATH)/$(LIBNAME)-config --cflags` pngtest.c \ + -o pngtesti `$(BINPATH)/$(LIBNAME)-config --ldflags` \ + -L$(ZLIBLIB) -R$(ZLIBLIB) + ./pngtesti pngtest.png + +clean: + $(RM_F) *.o libpng.a pngtest pngtesti pngout.png \ + libpng-config $(LIBSO) $(LIBSOMAJ)* \ + libpng.pc pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o png.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o pngerror.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o pngrio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o pngwio.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o pngmem.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o pngset.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o pngget.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o pngread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o pngrtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o pngrutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o pngtrans.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o pngwrite.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o pngwtran.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o pngwutil.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o pngpread.pic.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.std b/src/SDL2/external/libpng-1.6.2/scripts/makefile.std new file mode 100644 index 000000000..419eeedf2 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.std @@ -0,0 +1,124 @@ +# makefile for libpng +# Copyright (C) 2002, 2006 Glenn Randers-Pehrson +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# where make install puts libpng.a and png.h +prefix=/usr/local +INCPATH=$(prefix)/include +LIBPATH=$(prefix)/lib + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +# Where the zlib library and include files are located +#ZLIBLIB=/usr/local/lib +#ZLIBINC=/usr/local/include +ZLIBLIB=../zlib +ZLIBINC=../zlib + +CC=cc +AR_RC=ar rc +MKDIR_P=mkdir +LN_SF=ln -sf +RANLIB=ranlib +RM_F=rm -f +AWK = awk +SED = sed +CPP = $(CC) -E +ECHO = echo + +DFNFLAGS = # DFNFLAGS contains -D options to use in the libpng build +DFA_EXTRA = # extra files that can be used to control configuration +CFLAGS=-I$(ZLIBINC) -O # -g -DPNG_DEBUG=5 +LDFLAGS=-L. -L$(ZLIBLIB) -lpng -lz -lm + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +all: libpng.a pngtest + +# The standard pnglibconf.h exists as scripts/pnglibconf.h.prebuilt, +# copy this if the following doesn't work. +pnglibconf.h: pnglibconf.dfn + $(RM_F) $@ pnglibconf.c pnglibconf.out pnglibconf.tmp + $(ECHO) '#include "pnglibconf.dfn"' >pnglibconf.c + $(ECHO) "If '$(CC) -E' crashes try /lib/cpp (e.g. CPP='/lib/cpp')" >&2 + $(CPP) $(DFNFLAGS) pnglibconf.c >pnglibconf.out + $(AWK) -f "scripts/dfn.awk" out="pnglibconf.tmp" pnglibconf.out 1>&2 + mv pnglibconf.tmp $@ + +pnglibconf.dfn: scripts/pnglibconf.dfa scripts/options.awk pngconf.h pngusr.dfa $(DFA_XTRA) + $(RM_F) $@ pnglibconf.pre pnglibconf.tmp + $(ECHO) "Calling $(AWK) from scripts/pnglibconf.mak" >&2 + $(ECHO) "If 'awk' crashes try a better awk (e.g. AWK='nawk')" >&2 + $(AWK) -f scripts/options.awk out="pnglibconf.pre"\ + version=search pngconf.h scripts/pnglibconf.dfa\ + pngusr.dfa $(DFA_XTRA) 1>&2 + $(AWK) -f scripts/options.awk out="pnglibconf.tmp" pnglibconf.pre 1>&2 + mv pnglibconf.tmp $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +pngtest: pngtest.o libpng.a + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install: libpng.a pnglibconf.h + -@$(MKDIR_P) $(DESTDIR)$(INCPATH) + -@$(MKDIR_P) $(DESTDIR)$(INCPATH)/libpng + -@$(MKDIR_P) $(DESTDIR)$(LIBPATH) + -@$(RM_F) $(DESTDIR)$(INCPATH)/png.h + -@$(RM_F) $(DESTDIR)$(INCPATH)/pngconf.h + -@$(RM_F) $(DESTDIR)$(INCPATH)/pnglibconf.h + cp png.h $(DESTDIR)$(INCPATH)/libpng + cp pngconf.h $(DESTDIR)$(INCPATH)/libpng + cp pnglibconf.h $(DESTDIR)$(INCPATH)/libpng + chmod 644 $(DESTDIR)$(INCPATH)/libpng/png.h + chmod 644 $(DESTDIR)$(INCPATH)/libpng/pngconf.h + chmod 644 $(DESTDIR)$(INCPATH)/libpng/pnglibconf.h + (cd $(DESTDIR)$(INCPATH); ln -f -s libpng/* .) + cp libpng.a $(DESTDIR)$(LIBPATH) + chmod 644 $(DESTDIR)$(LIBPATH)/libpng.a + +clean: + $(RM_F) *.o libpng.a pngtest pngout.png pnglibconf.* + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.sunos b/src/SDL2/external/libpng-1.6.2/scripts/makefile.sunos new file mode 100644 index 000000000..c1d016505 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.sunos @@ -0,0 +1,107 @@ +# makefile for libpng +# Copyright (C) 2002, 2006 Glenn Randers-Pehrson +# Copyright (C) 1995 Guy Eric Schalnat, Group 42, Inc. +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# where make install puts libpng.a and png.h +prefix=/usr/local +INCPATH=$(prefix)/include +LIBPATH=$(prefix)/lib + +# override DESTDIR= on the make install command line to easily support +# installing into a temporary location. Example: +# +# make install DESTDIR=/tmp/build/libpng +# +# If you're going to install into a temporary location +# via DESTDIR, $(DESTDIR)$(prefix) must already exist before +# you execute make install. +DESTDIR= + +# Where the zlib library and include files are located +#ZLIBLIB=/usr/local/lib +#ZLIBINC=/usr/local/include +ZLIBLIB=../zlib +ZLIBINC=../zlib + + +WARNMORE=-Wwrite-strings -Wpointer-arith -Wshadow -Wconversion \ + -Wmissing-declarations -Wtraditional -Wcast-align \ + -Wstrict-prototypes -Wmissing-prototypes + +CC=gcc +AR_RC=ar rc +MKDIR_P=mkdir -p +LN_SF=ln -f -s +RANLIB=ranlib +RM_F=/bin/rm -f + +CFLAGS=-I$(ZLIBINC) -O # $(WARNMORE) -DPNG_DEBUG=5 +LDFLAGS=-L. -L$(ZLIBLIB) -lpng -lz -lm + +OBJS = png.o pngset.o pngget.o pngrutil.o pngtrans.o pngwutil.o \ + pngread.o pngrio.o pngwio.o pngwrite.o pngrtran.o \ + pngwtran.o pngmem.o pngerror.o pngpread.o + +all: libpng.a pngtest + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +libpng.a: $(OBJS) + $(AR_RC) $@ $(OBJS) + $(RANLIB) $@ + +pngtest: pngtest.o libpng.a + $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS) + +test: pngtest + ./pngtest + +install: libpng.a + -@$(MKDIR_P) $(DESTDIR)$(INCPATH) + -@$(MKDIR_P) $(DESTDIR)$(INCPATH)/libpng + -@$(MKDIR_P) $(DESTDIR)$(LIBPATH) + -@$(RM_F) $(DESTDIR)$(INCPATH)/png.h + -@$(RM_F) $(DESTDIR)$(INCPATH)/pngconf.h + -@$(RM_F) $(DESTDIR)$(INCPATH)/pnglibconf.h + cp png.h $(DESTDIR)$(INCPATH)/libpng + cp pngconf.h $(DESTDIR)$(INCPATH)/libpng + cp pnglibconf.h $(DESTDIR)$(INCPATH)/libpng + chmod 644 $(DESTDIR)$(INCPATH)/libpng/png.h + chmod 644 $(DESTDIR)$(INCPATH)/libpng/pngconf.h + chmod 644 $(DESTDIR)$(INCPATH)/libpng/pnglibconf.h + (cd $(DESTDIR)$(INCPATH); $(LN_SF) libpng/* .) + cp libpng.a $(DESTDIR)$(LIBPATH) + chmod 644 $(DESTDIR)$(LIBPATH)/libpng.a + +clean: + $(RM_F) *.o libpng.a pngtest pngout.png pnglibconf.h + +DOCS = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO +writelock: + chmod a-w *.[ch35] $(DOCS) scripts/* + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +png.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngerror.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwio.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngmem.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngset.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngget.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngrutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngtrans.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwrite.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwtran.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngwutil.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +pngpread.o: png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + +pngtest.o: png.h pngconf.h pnglibconf.h diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.tc3 b/src/SDL2/external/libpng-1.6.2/scripts/makefile.tc3 new file mode 100644 index 000000000..a046bf6ab --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.tc3 @@ -0,0 +1,93 @@ +# Makefile for libpng +# TurboC/C++ (Note: All modules are compiled in C mode) + +# To use, do "make -fmakefile.tc3" + +# ----- Turbo C 3.00 (can be modified to work with earlier versions) ----- + +MODEL=l +CFLAGS=-O2 -Z -m$(MODEL) -I..\zlib +#CFLAGS=-D_NO_PROTO -O2 -Z -m$(MODEL) -I..\zlib # Turbo C older than 3.00 +CC=tcc +LD=tcc +LIB=tlib +LDFLAGS=-m$(MODEL) -L..\zlib +O=.obj +E=.exe + +# variables +OBJS1 = png$(O) pngset$(O) pngget$(O) pngrutil$(O) pngtrans$(O) pngwutil$(O) +OBJS2 = pngmem$(O) pngpread$(O) pngread$(O) pngerror$(O) pngwrite$(O) +OBJS3 = pngrtran$(O) pngwtran$(O) pngrio$(O) pngwio$(O) +OBJSL1 = +png$(O) +pngset$(O) +pngget$(O) +pngrutil$(O) +pngtrans$(O) +OBJSL2 = +pngwutil$(O) +pngmem$(O) +pngpread$(O) +pngread$(O) +pngerror$(O) +OBJSL3 = +pngwrite$(O) +pngrtran$(O) +pngwtran$(O) +pngrio$(O) +pngwio$(O) + +all: libpng$(MODEL).lib pngtest$(E) + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts/pnglibconf.h.prebuilt + cp scripts/pnglibconf.h.prebuilt $@ + +pngtest: pngtest$(E) + +test: pngtest$(E) + pngtest$(E) + +png$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngset$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngget$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngpread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngrtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngrutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngerror$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngmem$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngrio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngwio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngtest$(O): png.h pngconf.h pnglibconf.h + $(CC) -c $(CFLAGS) $*.c + +pngtrans$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngwrite$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngwtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +pngwutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c + +libpng$(MODEL).lib: $(OBJS1) $(OBJS2) $(OBJS3) + $(LIB) libpng$(MODEL) +$(OBJSL1) + $(LIB) libpng$(MODEL) +$(OBJSL2) + $(LIB) libpng$(MODEL) +$(OBJSL3) + +pngtest$(E): pngtest$(O) libpng$(MODEL).lib + $(LD) $(LDFLAGS) pngtest.obj libpng$(MODEL).lib zlib_$(MODEL).lib + +# End of makefile for libpng diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makefile.vcwin32 b/src/SDL2/external/libpng-1.6.2/scripts/makefile.vcwin32 new file mode 100644 index 000000000..3ca7a0114 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makefile.vcwin32 @@ -0,0 +1,108 @@ +# makefile for libpng +# Copyright (C) 1998 Tim Wegner +# Copyright (C) 2006,2009,2011 Glenn Randers-Pehrson +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h +# +# Assumes that zlib.lib, zconf.h, and zlib.h have been copied to ..\zlib +# To use, do "nmake /f scripts\makefile.vcwin32" + +# -------- Microsoft Visual C++ 2.0 and later, no assembler code -------- + +# Compiler, linker, librarian, and other tools +CC = cl +LD = link +AR = lib +CFLAGS = -nologo -D_CRT_SECURE_NO_DEPRECATE -MD -O2 -W3 -I..\zlib +LDFLAGS = -nologo +ARFLAGS = -nologo +RM = del + +# File extensions +O=.obj + +#uncomment next to put error messages in a file +#ERRFILE= >> pngerrs.log + +# Variables +OBJS1 = png$(O) pngerror$(O) pngget$(O) pngmem$(O) pngpread$(O) +OBJS2 = pngread$(O) pngrio$(O) pngrtran$(O) pngrutil$(O) pngset$(O) +OBJS3 = pngtrans$(O) pngwio$(O) pngwrite$(O) pngwtran$(O) pngwutil$(O) +OBJS = $(OBJS1) $(OBJS2) $(OBJS3) + +# Targets +all: libpng.lib + +# see scripts/pnglibconf.mak for more options +pnglibconf.h: scripts\pnglibconf.h.prebuilt + copy scripts\pnglibconf.h.prebuilt $@ + +png$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngset$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngget$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngpread$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngrtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngrutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngerror$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngmem$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngrio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngwio$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngtrans$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngwrite$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngwtran$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngwutil$(O): png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +libpng.lib: $(OBJS) + -$(RM) $@ + $(AR) $(ARFLAGS) -out:$@ $(OBJS) $(ERRFILE) + +pngtest$(O): png.h pngconf.h pnglibconf.h + $(CC) -c $(CFLAGS) $*.c $(ERRFILE) + +pngtest.exe: pngtest$(O) libpng.lib + $(LD) $(LDFLAGS) -out:$@ pngtest$(O) libpng.lib ..\zlib\zlib.lib $(ERRFILE) + +test: pngtest.exe + pngtest + +clean: + -$(RM) *$(O) + -$(RM) libpng.lib + -$(RM) pnglibconf.h + -$(RM) pngtest.exe + -$(RM) pngout.png + +# End of makefile for libpng + diff --git a/src/SDL2/external/libpng-1.6.2/scripts/makevms.com b/src/SDL2/external/libpng-1.6.2/scripts/makevms.com new file mode 100644 index 000000000..692855357 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/makevms.com @@ -0,0 +1,142 @@ +$! make libpng under VMS +$! +$! +$! Check for MMK/MMS +$! +$! This procedure accepts one parameter (contrib), which causes it to build +$! the programs from the contrib directory instead of libpng. +$! +$ p1 = f$edit(p1,"UPCASE") +$ if p1 .eqs. "CONTRIB" +$ then +$ set def [.contrib.gregbook] +$ @makevms +$ set def [-.pngminus] +$ @makevms +$ set def [--] +$ exit +$ endif +$ Make = "" +$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS" +$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK" +$! +$! Look for the compiler used +$! +$ zlibsrc = "[-.zlib]" +$ ccopt="/include=''zlibsrc'" +$ if f$getsyi("HW_MODEL").ge.1024 +$ then +$ ccopt = "/prefix=all"+ccopt +$ comp = "__decc__=1" +$ if f$trnlnm("SYS").eqs."" then define sys sys$library: +$ else +$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs."" +$ then +$ if f$trnlnm("SYS").eqs."" then define sys sys$library: +$ if f$search("SYS$SYSTEM:VAXC.EXE").eqs."" +$ then +$ comp = "__gcc__=1" +$ CC :== GCC +$ else +$ comp = "__vaxc__=1" +$ endif +$ else +$ if f$trnlnm("SYS").eqs."" then define sys decc$library_include: +$ ccopt = "/decc/prefix=all"+ccopt +$ comp = "__decc__=1" +$ endif +$ endif +$! +$! Build the thing plain or with mms/mmk +$! +$ write sys$output "Compiling Libpng sources ..." +$ if make.eqs."" +$ then +$ dele pngtest.obj;* +$ CALL MAKE png.OBJ "cc ''CCOPT' png" - + png.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngset.OBJ "cc ''CCOPT' pngset" - + pngset.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngget.OBJ "cc ''CCOPT' pngget" - + pngget.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngread.OBJ "cc ''CCOPT' pngread" - + pngread.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngpread.OBJ "cc ''CCOPT' pngpread" - + pngpread.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngrtran.OBJ "cc ''CCOPT' pngrtran" - + pngrtran.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngrutil.OBJ "cc ''CCOPT' pngrutil" - + pngrutil.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngerror.OBJ "cc ''CCOPT' pngerror" - + pngerror.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngmem.OBJ "cc ''CCOPT' pngmem" - + pngmem.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngrio.OBJ "cc ''CCOPT' pngrio" - + pngrio.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngwio.OBJ "cc ''CCOPT' pngwio" - + pngwio.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngtrans.OBJ "cc ''CCOPT' pngtrans" - + pngtrans.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngwrite.OBJ "cc ''CCOPT' pngwrite" - + pngwrite.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngwtran.OBJ "cc ''CCOPT' pngwtran" - + pngwtran.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ CALL MAKE pngwutil.OBJ "cc ''CCOPT' pngwutil" - + pngwutil.c png.h pngconf.h pnglibconf.h pngpriv.h pngstruct.h pnginfo.h pngdebug.h +$ write sys$output "Building Libpng ..." +$ CALL MAKE libpng.OLB "lib/crea libpng.olb *.obj" *.OBJ +$ write sys$output "Building pngtest..." +$ CALL MAKE pngtest.OBJ "cc ''CCOPT' pngtest" - + pngtest.c png.h pngconf.h pnglibconf.h +$ call make pngtest.exe - + "LINK pngtest,libpng.olb/lib,''zlibsrc'libz.olb/lib" - + pngtest.obj libpng.olb +$ write sys$output "Testing Libpng..." +$ run pngtest +$ else +$ if f$search("DESCRIP.MMS") .eqs. "" then copy/nolog [.SCRIPTS]DESCRIP.MMS [] +$ 'make'/macro=('comp',zlibsrc='zlibsrc') +$ endif +$ write sys$output "Libpng build completed" +$ exit +$! +$! +$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES +$ V = 'F$Verify(0) +$! P1 = What we are trying to make +$! P2 = Command to make it +$! P3 - P8 What it depends on +$ +$ If F$Search(P1) .Eqs. "" Then Goto Makeit +$ Time = F$CvTime(F$File(P1,"RDT")) +$arg=3 +$Loop: +$ Argument = P'arg +$ If Argument .Eqs. "" Then Goto Exit +$ El=0 +$Loop2: +$ File = F$Element(El," ",Argument) +$ If File .Eqs. " " Then Goto Endl +$ AFile = "" +$Loop3: +$ OFile = AFile +$ AFile = F$Search(File) +$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl +$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit +$ Goto Loop3 +$NextEL: +$ El = El + 1 +$ Goto Loop2 +$EndL: +$ arg=arg+1 +$ If arg .Le. 8 Then Goto Loop +$ Goto Exit +$ +$Makeit: +$ VV=F$VERIFY(0) +$ write sys$output P2 +$ 'P2 +$ VV='F$Verify(VV) +$Exit: +$ If V Then Set Verify +$ENDSUBROUTINE diff --git a/src/SDL2/external/libpng-1.6.2/scripts/options.awk b/src/SDL2/external/libpng-1.6.2/scripts/options.awk new file mode 100755 index 000000000..c3a850173 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/options.awk @@ -0,0 +1,893 @@ +#!/bin/awk -f +# scripts/options.awk - library build configuration control +# +# last changed in libpng version 1.5.7 - December 15, 2011 +# +# Copyright (c) 1998-2011 Glenn Randers-Pehrson +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +# The output of this script is written to the file given by +# the variable 'out'. The script is run twice, once with +# an intermediate output file, 'options.tmp' then again on +# that file to produce the final output: +# +# awk -f scripts/options.awk out=options.tmp scripts/options.dfa 1>&2 +# awk -f scripts/options.awk out=options.dfn options.tmp 1>&2 +# +# Some options may be specified on the command line: +# +# deb=1 Causes debugging to be output +# logunsupported=1 Causes all options to be recorded in the output +# everything=off Causes all options to be disabled by default +# everything=on Causes all options to be enabled by default +# +# If awk fails on your platform, try nawk instead. +# +# These options may also be specified in the original input file (and +# are copied to the preprocessed file). + +BEGIN{ + out="" # intermediate, preprocessed, file + pre=-1 # preprocess (first line) + version="libpng version unknown" # version information + version_file="" # where to find the version + err=0 # in-line exit sets this + # The following definitions prevent the C preprocessor noticing the lines + # that will be in the final output file. Some C preprocessors tokenise + # the lines, for example by inserting spaces around operators, and all + # C preprocessors notice lines that start with '#', most remove comments. + # The technique adopted here is to make the final output lines into + # C strings (enclosed in double quotes), preceeded by PNG_DFN. As a + # consequence the output cannot contain a 'raw' double quote - instead put + # @' in, this will be replaced by a single " afterward. See the parser + # script dfn.awk for more capabilities (not required here). Note that if + # you need a " in a 'setting' in pnglibconf.dfa it must also be @'! + dq="@'" # For a single double quote + start=" PNG_DFN \"" # Start stuff to output (can't contain a "!) + end="\" " # End stuff to output + subs="@\" " # Substitute start (substitute a C macro) + sube=" \"@" # Substitute end + comment=start "/*" # Comment start + cend="*/" end # Comment end + def=start "#define PNG_" # Arbitrary define + sup="_SUPPORTED" end # end supported option + und=comment "#undef PNG_" # Unsupported option + une="_SUPPORTED" cend # end unsupported option + error=start "ERROR:" # error message, terminate with 'end' + + # Variables + deb=0 # debug - set on command line + everything="" # do not override defaults + logunsupported=0 # write unsupported options too + + # Precreate arrays + # for each option: + option[""] = "" # list of all options: default enabled/disabled + done[""] = 1 # marks option as having been output + requires[""] = "" # requires by option + iffs[""] = "" # if by option + enabledby[""] = "" # options that enable it by option + sets[""] = "" # settings set by each option + setval[""] = "" # value to set (indexed: 'option sets[option]') + # for each setting: + setting[""] = "" # requires by setting + defaults[""] = "" # used for a defaulted value + doneset[""] = 1 # marks setting as having been output + r[""] = "" # Temporary array + + # For decorating the output file + protect = "" +} + +# The output file must be specified before any input: +out == "" { + print "out=output.file must be given on the command line" + err = 1 + exit 1 +} + +# The very first line indicates whether we are reading pre-processed +# input or not, this must come *first* because 'PREPROCESSED' needs +# to be the very first line in the temporary file. +pre == -1{ + if ($0 == "PREPROCESSED") { + pre = 0 + next + } else { + pre = 1 + print "PREPROCESSED" >out + # And fall through to continue processing + } +} + +# While pre-processing if version is set to "search" look for a version string +# in the following file. +pre && version == "search" && version_file == ""{ + version_file = FILENAME +} + +pre && version == "search" && version_file != FILENAME{ + print "version string not found in", version_file + err = 1 + exit 1 +} + +pre && version == "search" && $0 ~ /^ \* libpng version/{ + version = substr($0, 4) + print "version =", version >out + next +} + +pre && FILENAME == version_file{ + next +} + +# variable=value +# Sets the given variable to the given value (the syntax is fairly +# free form, except for deb (you are expected to understand how to +# set the debug variable...) +# +# This happens before the check on 'pre' below skips most of the +# rest of the actions, so the variable settings happen during +# preprocessing but are recorded in the END action too. This +# allows them to be set on the command line too. +$0 ~ /^[ ]*version[ ]*=/{ + sub(/^[ ]*version[ ]*=[ ]*/, "") + version = $0 + next +} +$0 ~ /^[ ]*everything[ =]*off[ ]*$/{ + everything = "off" + next +} +$0 ~ /^[ ]*everything[ =]*on[ ]*$/{ + everything = "on" + next +} +$0 ~ /^[ ]*logunsupported[ =]*0[ ]*$/{ + logunsupported = 0 + next +} +$0 ~ /^[ ]*logunsupported[ =]*1[ ]*$/{ + logunsupported = 1 + next +} +$1 == "deb" && $2 == "=" && NF == 3{ + deb = $3 + next +} + +# Preprocessing - this just copies the input file with lines +# that need preprocessing (just chunk at present) expanded +# The bare "pre" instead of "pre != 0" crashes under Sunos awk +pre && $1 != "chunk"{ + print >out + next +} + +# The first characters of the line determine how it is processed, +# leading spaces are ignored. In general tokens that are not +# keywords are the names of options. An option 'name' is +# controlled by the definition of the corresponding macros: +# +# PNG_name_SUPPORTED The option is turned on +# PNG_NO_name +# PNG_NO_name_SUPPORTED If the first macro is not defined +# either of these will turn the option off +# +# If none of these macros are defined the option is turned on, unless +# the keyword 'off' is given in a line relating to the option. The +# keyword 'on' can also be given, but it will be ignored (since it is +# the default.) +# +# In the syntax below a 'name' is indicated by "NAME", other macro +# values are indicated by "MACRO", as with "NAME" the leading "PNG_" +# is omitted, but in this case the "NO_" prefix and the "_SUPPORTED" +# suffix are never used. +# +# Each line is introduced by a keyword - the first non-space characters +# on the line. A line starting with a '#' is a comment - it is totally +# ignored. Keywords are as follows, a NAME, is simply a macro name +# without the leading PNG_, PNG_NO_ or the trailing _SUPPORTED. + +$1 ~ /^#/ || $0 ~ /^[ ]*$/{ + next +} + +# com +# The whole line is placed in the output file as a comment with +# the preceding 'com' removed +$1 == "com"{ + if (NF > 1) { + # sub(/^[ ]*com[ ]*/, "") + $1 = "" + print comment $0, cend >out + } else + print start end >out + next +} + +# version +# Inserts a version comment +$1 == "version" && NF == 1{ + if (version == "") { + print "ERROR: no version string set" + err = 1 # prevent END{} running + exit 1 + } + + print comment, version, cend >out + next +} + +# file output input protect +# Informational: the official name of the input file (without +# make generated local directories), the official name of the +# output file and, if required, a name to use in a protection +# macro for the contents. +$1 == "file" && NF >= 2{ + print comment, $2, cend >out + print comment, "Machine generated file: DO NOT EDIT", cend >out + if (NF >= 3) + print comment, "Derived from:", $3, cend >out + protect = $4 + if (protect != "") { + print start "#ifndef", protect end >out + print start "#define", protect end >out + } + next +} + +# option NAME ( (requires|enables|if) NAME* | on | off | disabled | +# sets SETTING VALUE+ )* +# +# Declares an option 'NAME' and describes its default setting (disabled) +# and its relationship to other options. The option is disabled +# unless *all* the options listed after 'requires' are set and at +# least one of the options listed after 'if' is set. If the +# option is set then it turns on all the options listed after 'enables'. +# +# Note that "enables" takes priority over the required/if/disabled/off +# setting of the target option. +# +# The definition file may list an option as 'disabled': off by default, +# otherwise the option is enabled: on by default. A later (and it must +# be later) entry may turn an option on or off explicitly. + +$1 == "option" && NF >= 2{ + opt = $2 + sub(/,$/,"",opt) + onoff = option[opt] # records current (and the default is "", enabled) + key = "" + istart = 3 + do { + if (istart == 1) { # continuation line + val = getline + + if (val != 1) { # error reading it + if (val == 0) + print "option", opt ": ERROR: missing contination line" + else + print "option", opt ": ERROR: error reading continuation line" + + # This is a hard error + err = 1 # prevent END{} running + exit 1 + } + } + + for (i=istart; i<=NF; ++i) { + val=$(i) + sub(/,$/,"",val) + if (val == "on" || val == "off" || val == "disabled") { + key = "" + if (onoff != val) { + # on or off can zap disabled or enabled: + if (onoff == "" || (onoff == "disabled" || onoff == "enabled") && + (val == "on" || val == "off")) { + # It's easy to mis-spell the option when turning it + # on or off, so warn about it here: + if (onoff == "" && (val == "on" || val == "off")) { + print "option", opt ": ERROR: turning unrecognized option", val + # For the moment error out - it is safer + err = 1 # prevent END{} running + exit 1 + } + onoff = val + } else { + # Print a message, otherwise the error + # below is incomprehensible + print "option", opt ": currently", onoff ": attempt to turn", val + break + } + } + } else if (val == "requires" || val == "if" || val == "enables" || val =="sets") { + key = val + } else if (key == "requires") { + requires[opt] = requires[opt] " " val + } else if (key == "if") { + iffs[opt] = iffs[opt] " " val + } else if (key == "enables") { + enabledby[val] = enabledby[val] " " opt + } else if (key == "sets") { + sets[opt] = sets[opt] " " val + key = "setval" + set = val + } else if (key == "setval") { + setval[opt " " set] = setval[opt " " set] " " val + } else + break # bad line format + } + + istart = 1 + } while (i > NF && $0 ~ /,$/) + + if (i > NF) { + # Set the option, defaulting to 'enabled' + if (onoff == "") onoff = "enabled" + option[opt] = onoff + next + } + # Else fall through to the error handler +} + +# chunk NAME [requires OPT] [enables LIST] [on|off|disabled] +# Expands to the 'option' settings appropriate to the reading and +# writing of an ancilliary PNG chunk 'NAME': +# +# option READ_NAME requires READ_ANCILLARY_CHUNKS [READ_OPT] +# option READ_NAME enables NAME LIST +# [option READ_NAME off] +# option WRITE_NAME requires WRITE_ANCILLARY_CHUNKS [WRITE_OPT] +# option WRITE_NAME enables NAME LIST +# [option WRITE_NAME off] + +pre != 0 && $1 == "chunk" && NF >= 2{ + # 'chunk' is handled on the first pass by writing appropriate + # 'option' lines into the intermediate file. + opt = $2 + sub(/,$/,"",opt) + onoff = "" + reqread = "" + reqwrite = "" + enables = "" + req = 0 + istart = 3 + do { + if (istart == 1) { # continuation line + val = getline + + if (val != 1) { # error reading it + if (val == 0) + print "chunk", opt ": ERROR: missing contination line" + else + print "chunk", opt ": ERROR: error reading continuation line" + + # This is a hard error + err = 1 # prevent END{} running + exit 1 + } + } + + # read the keywords/additional OPTS + for (i=istart; i<=NF; ++i) { + val = $(i) + sub(/,$/,"",val) + if (val == "on" || val == "off" || val == "disabled") { + if (onoff != val) { + if (onoff == "") + onoff = val + else + break # on/off conflict + } + req = 0 + } else if (val == "requires") + req = 1 + else if (val == "enables") + req = 2 + else if (req == 1){ + reqread = reqread " READ_" val + reqwrite = reqwrite " WRITE_" val + } else if (req == 2) + enables = enables " " val + else + break # bad line: handled below + } + + istart = 1 + } while (i > NF && $0 ~ /,$/) + + if (i > NF) { + # Output new 'option' lines to the intermediate file (out) + print "option READ_" opt, "requires READ_ANCILLARY_CHUNKS" reqread, "enables", opt enables , onoff >out + print "option WRITE_" opt, "requires WRITE_ANCILLARY_CHUNKS" reqwrite, "enables", opt enables, onoff >out + next + } + # Else hit the error handler below - bad line format! +} + +# setting MACRO ( requires MACRO* )* [ default VALUE ] +# Behaves in a similar way to 'option' without looking for NO_ or +# _SUPPORTED; the macro is enabled if it is defined so long as all +# the 'requires' macros are also defined. The definitions may be +# empty, an error will be issued if the 'requires' macros are +# *not* defined. If given the 'default' value is used if the +# macro is not defined. The default value will be re-tokenised. +# (BTW: this is somewhat restrictive, it mainly exists for the +# support of non-standard configurations and numeric parameters, +# see the uses in scripts/options.dat + +$1 == "setting" && (NF == 2 || NF >= 3 && ($3 == "requires" || $3 == "default")){ + reqs = "" + deflt = "" + isdef = 0 + key = "" + for (i=3; i<=NF; ++i) + if ($(i) == "requires" || $(i) == "default") { + key = $(i) + if (key == "default") isdef = 1 + } else if (key == "requires") + reqs = reqs " " $(i) + else if (key == "default") + deflt = deflt " " $(i) + else + break # Format error, handled below + + setting[$2] = reqs + # NOTE: this overwrites a previous value silently + if (isdef && deflt == "") + deflt = " " # as a flag to force output + defaults[$2] = deflt + next +} + +# The order of the dependency lines (option, chunk, setting) is irrelevant +# - the 'enables', 'requires' and 'if' settings will be used to determine +# the correct order in the output and the final values in pnglibconf.h are +# not order dependent. 'requires' and 'if' entries take precedence over +# 'enables' from other options; if an option requires another option it +# won't be set regardless of any options that enable it unless the other +# option is also enabled. +# +# Similarly 'enables' trumps a NO_ definition in CFLAGS or pngusr.h +# +# For simplicity cycles in the definitions are regarded as errors, +# even if they are not ambiguous. +# A given NAME can be specified in as many 'option' lines as required, the +# definitions are additive. + +# For backwards compatibility equivalent macros may be listed thus: +# +# = [NO_]NAME MACRO +# Makes -DMACRO equivalent to -DPNG_NO_NAME or -DPNG_NAME_SUPPORTED +# as appropriate. +# +# The definition is injected into the C compiler input when encountered +# in the second pass (so all these definitions appear *after* the @ +# lines!) +# +# 'NAME' is as above, but 'MACRO' is the full text of the equivalent +# old, deprecated, macro. + +$1 == "=" && NF == 3{ + print "#ifdef PNG_" $3 >out + if ($2 ~ /^NO_/) + print "# define PNG_" $2 >out + else + print "# define PNG_" $2 "_SUPPORTED" >out + print "#endif" >out + next +} + +# Lines may be injected into the C compiler input by preceding them +# with an "@" character. The line is copied with just the leading +# @ removed. + +$1 ~ /^@/{ + # sub(/^[ ]*@/, "") + $1 = substr($1, 2) + print >out + next +} + +# Check for unreognized lines, because of the preprocessing chunk +# format errors will be detected on the first pass independent of +# any other format errors. +{ + print "options.awk: bad line (" NR "):", $0 + err = 1 # prevent END{} running + exit 1 +} + +# For checking purposes names that start with "ok_" or "fail_" are +# not output to pnglibconf.h and must be either enabled or disabled +# respectively for the build to succeed. This allows interdependencies +# between options of the form "at least one of" or "at most one of" +# to be checked. For example: +# +# option FLOATING_POINT enables ok_math +# option FIXED_POINT enables ok_math +# This ensures that at least one of FLOATING_POINT and FIXED_POINT +# must be set for the build to succeed. +# +# option fail_math requires FLOATING_POINT FIXED_POINT +# This means the build will fail if *both* FLOATING_POINT and +# FIXED_POINT are set (this is an example; in fact both are allowed.) +# +# If all these options were given the build would require exactly one +# of the names to be enabled. + +END{ + # END{} gets run on an exit (a traditional awk feature) + if (err) exit 1 + + if (pre) { + # Record the final value of the variables + print "deb =", deb >out + if (everything != "") { + print "everything =", everything >out + } + print "logunsupported =", logunsupported >out + exit 0 + } + + # Do the options first (allowing options to set settings). The dependency + # tree is thus: + # + # name > name + # name requires name + # name if name + # name enabledby name + # + # First build a list 'tree' by option of all the things on which + # it depends. + print "" >out + print "/* OPTIONS */" >out + print comment, "options", cend >out + for (opt in enabledby) tree[opt] = 1 # may not be explicit options + for (opt in option) if (opt != "") { + o = option[opt] + # option should always be one of the following values + if (o != "on" && o != "off" && o != "disabled" && o != "enabled") { + print "internal option error (" o ")" + exit 1 + } + tree[opt] = "" # so unlisted options marked + } + for (opt in tree) if (opt != "") { + if (tree[opt] == 1) { + tree[opt] = "" + if (option[opt] != "") { + print "internal error (1)" + exit 1 + } + # Macros only listed in 'enables' remain off unless + # one of the enabling macros is on. + option[opt] = "disabled" + } + + split("", list) # clear 'list' + # Now add every requires, iffs or enabledby entry to 'list' + # so that we can add a unique list of requirements to tree[i] + split(requires[opt] iffs[opt] enabledby[opt], r) + for (i in r) list[r[i]] = 1 + for (i in list) tree[opt] = tree[opt] " " i + } + + # print the tree for extreme debugging + if (deb > 2) for (i in tree) if (i != "") print i, "depends-on" tree[i] + + # Ok, now check all options marked explicitly 'on' or 'off': + # + # If an option[opt] is 'on' then turn on all requires[opt] + # If an option[opt] is 'off' then turn off all enabledby[opt] + # + # Error out if we have to turn 'on' an 'off' option or vice versa. + npending = 0 + for (opt in option) if (opt != "") { + if (option[opt] == "on" || option[opt] == "off") { + pending[++npending] = opt + } + } + + err = 0 # set on error + while (npending > 0) { + opt = pending[npending--] + if (option[opt] == "on") { + nreqs = split(requires[opt], r) + for (j=1; j<=nreqs; ++j) { + if (option[r[j]] == "off") { + print "option", opt, "turned on, but requirement", r[j], "is turned off" + err = 1 + } else if (option[r[j]] != "on") { + option[r[j]] = "on" + pending[++npending] = r[j] + } + } + } else { + if (option[opt] != "off") { + print "internal error (2)" + exit 1 + } + nreqs = split(enabledby[opt], r) + for (j=1; j<=nreqs; ++j) { + if (option[r[j]] == "on") { + print "option", opt, "turned off, but enabled by", r[j], "which is turned on" + err = 1 + } else if (option[r[j]] != "off") { + option[r[j]] = "off" + pending[++npending] = r[j] + } + } + } + } + if (err) exit 1 + + # Sort options: + print "PNG_DFN_START_SORT 2" >out + + # option[i] is now the complete list of all the tokens we may + # need to output, go through it as above, depth first. + finished = 0 + while (!finished) { + finished = 1 + movement = 0 # done nothing + for (i in option) if (!done[i]) { + nreqs = split(tree[i], r) + if (nreqs > 0) { + for (j=1; j<=nreqs; ++j) if (!done[r[j]]) { + break + } + if (j<=nreqs) { + finished = 0 + continue # next option + } + } + + # All the requirements have been processed, output + # this option. An option is _SUPPORTED if: + # + # all 'requires' are _SUPPORTED AND + # at least one of the 'if' options are _SUPPORTED AND + # EITHER: + # The name is _SUPPORTED (on the command line) + # OR: + # an 'enabledby' is _SUPPORTED + # OR: + # NO_name is not defined AND + # the option is not disabled; an option is disabled if: + # option == off + # option == disabled && everything != on + # option == "" && everything == off + if (deb) print "option", i + print "" >out + print "/* option:", i, option[i] >out + print " * requires: " requires[i] >out + print " * if: " iffs[i] >out + print " * enabled-by:" enabledby[i] >out + print " * sets: " sets[i], "*/" >out + print "#undef PNG_on" >out + print "#define PNG_on 1" >out + + # requires + nreqs = split(requires[i], r) + for (j=1; j<=nreqs; ++j) { + print "#ifndef PNG_" r[j] "_SUPPORTED" >out + print "# undef PNG_on /*!" r[j] "*/" >out + # this error appears in the final output if something + # was switched 'on' but the processing above to force + # the requires did not work + if (option[i] == "on") { + print error, i, "requires", r[j] end >out + } + print "#endif" >out + } + + # if + nreqs = split(iffs[i], r) + print "#undef PNG_no_if" >out + if (nreqs > 0) { + print "/* if" iffs[i], "*/" >out + print "#define PNG_no_if 1" >out + for (j=1; j<=nreqs; ++j) { + print "#ifdef PNG_" r[j] "_SUPPORTED" >out + print "# undef PNG_no_if /*" r[j] "*/" >out + print "#endif" >out + } + print "#ifdef PNG_no_if /*missing if*/" >out + print "# undef PNG_on" >out + # There is no checking above for this, because we + # don't know which 'if' to choose, so whine about + # it here: + if (option[i] == "on") { + print error, i, "needs one of:", iffs[i] end >out + } + print "#endif" >out + } + + print "#ifdef PNG_on /*requires, if*/" >out + # enables + print "# undef PNG_not_enabled" >out + print "# define PNG_not_enabled 1" >out + print " /* enabled by" enabledby[i], "*/" >out + nreqs = split(enabledby[i], r) + for (j=1; j<=nreqs; ++j) { + print "#ifdef PNG_" r[j] "_SUPPORTED" >out + print "# undef PNG_not_enabled /*" r[j] "*/" >out + # Oops, probably not intended (should be factored + # out by the checks above). + if (option[i] == "off") { + print error, i, "enabled by:", r[j] end >out + } + print "#endif" >out + } + + print "# ifndef PNG_" i "_SUPPORTED /*!command line*/" >out + print "# ifdef PNG_not_enabled /*!enabled*/" >out + if (option[i] == "off" || option[i] == "disabled" && everything != "on" || option[i] == "enabled" && everything == "off") { + print "# undef PNG_on /*default off*/" >out + } else { + print "# ifdef PNG_NO_" i >out + print "# undef PNG_on /*turned off*/" >out + print "# endif" >out + print "# ifdef PNG_NO_" i "_SUPPORTED" >out + print "# undef PNG_on /*turned off*/" >out + print "# endif" >out + } + print "# endif /*!enabled*/" >out + print "# ifdef PNG_on" >out + # The _SUPPORTED macro must be defined so that dependent + # options output later work. + print "# define PNG_" i "_SUPPORTED" >out + print "# endif" >out + print "# endif /*!command line*/" >out + # If PNG_on is still set the option should be defined in + # pnglibconf.h + print "# ifdef PNG_on" >out + if (i ~ /^fail_/) { + print error, i, "is on: enabled by:" iffs[i] enabledby[i] ", requires" requires[i] end >out + } else if (i !~ /^ok_/) { + print def i sup >out + # Supported option, set required settings + nreqs = split(sets[i], r) + for (j=1; j<=nreqs; ++j) { + print "# ifdef PNG_set_" r[j] >out + # Some other option has already set a value: + print error, i, "sets", r[j] ": duplicate setting" end >out + print error, " previous value: " end "PNG_set_" r[j] >out + print "# else" >out + # Else set the default: note that this won't accept arbitrary + # values, the setval string must be acceptable to all the C + # compilers we use. That means it must be VERY simple; a number, + # a name or a string. + print "# define PNG_set_" r[j], setval[i " " r[j]] >out + print "# endif" >out + } + } + print "# endif /* definition */" >out + print "#endif /*requires, if*/" >out + if (logunsupported || i ~ /^ok_/) { + print "#ifndef PNG_on" >out + if (logunsupported) { + print und i une >out + } + if (i ~ /^ok_/) { + print error, i, "not enabled: requires:" requires[i] ", enabled by:" iffs[i] enabledby[i] end >out + } + print "#endif" >out + } + + done[i] = 1 + ++movement + } + + if (!finished && !movement) { + print "option: loop or missing option in dependency tree, cannot process:" + for (i in option) if (!done[i]) { + print " option", i, "depends on" tree[i], "needs:" + nreqs = split(tree[i], r) + if (nreqs > 0) for (j=1; j<=nreqs; ++j) if (!done[r[j]]) { + print " " r[j] + } + } + exit 1 + } + } + print "PNG_DFN_END_SORT" >out + print comment, "end of options", cend >out + + # Do the 'setting' values second, the algorithm the standard + # tree walk (O(1)) done in an O(2) while/for loop; interations + # settings x depth, outputing the deepest required macros + # first. + print "" >out + print "/* SETTINGS */" >out + print comment, "settings", cend >out + # Sort (in dfn.awk) on field 2, the setting name + print "PNG_DFN_START_SORT 2" >out + finished = 0 + while (!finished) { + finished = 1 + movement = 0 # done nothing + for (i in setting) if (!doneset[i]) { + nreqs = split(setting[i], r) + if (nreqs > 0) { + # By default assume the requires values are options, but if there + # is no option with that name check for a setting + for (j=1; j<=nreqs; ++j) if (option[r[j]] == "" && !doneset[r[j]]) { + break + } + if (j<=nreqs) { + finished = 0 + continue # try a different setting + } + } + + # All the requirements have been processed, output + # this setting. + if (deb) print "setting", i + deflt = defaults[i] + # Remove any spurious trailing spaces + sub(/ *$/,"",deflt) + # A leading @ means leave it unquoted so the preprocessor + # can substitute the build time value + if (deflt ~ /^ @/) + deflt = " " subs substr(deflt, 3) sube + print "" >out + print "/* setting: ", i >out + print " * requires:" setting[i] >out + print " * default: ", defaults[i] deflt, "*/" >out + for (j=1; j<=nreqs; ++j) { + if (option[r[j]] != "") + print "#ifndef PNG_" r[j] "_SUPPORTED" >out + else + print "#ifndef PNG_" r[j] >out + print error, i, "requires", r[j] end >out + print "# endif" >out + } + # The precedence is: + # + # 1) External definition; trumps: + # 2) Option 'sets' value; trumps: + # 3) Setting 'default' + # + print "#ifdef PNG_" i >out + # PNG_ is defined, so substitute the value: + print def i, subs "PNG_" i sube end >out + print "#else /* use default */" >out + print "# ifdef PNG_set_" i >out + # Value from an option 'sets' argument + print def i, subs "PNG_set_" i sube end >out + # This is so that subsequent tests on the setting work: + print "# define PNG_" i, "1" >out + if (defaults[i] != "") { + print "# else /*default*/" >out + print def i deflt end >out + print "# define PNG_" i, "1" >out + } + print "# endif /* defaults */" >out + print "#endif /* setting", i, "*/" >out + + doneset[i] = 1 + ++movement + } + + if (!finished && !movement) { + print "setting: loop or missing setting in 'requires', cannot process:" + for (i in setting) if (!doneset[i]) { + print " setting", i, "requires" setting[i] + } + exit 1 + } + } + print "PNG_DFN_END_SORT" >out + print comment, "end of settings", cend >out + + # Regular end - everything looks ok + if (protect != "") { + print start "#endif", "/*", protect, "*/" end >out + } +} diff --git a/src/SDL2/external/libpng-1.6.2/scripts/pnglibconf.dfa b/src/SDL2/external/libpng-1.6.2/scripts/pnglibconf.dfa new file mode 100755 index 000000000..c95b10255 --- /dev/null +++ b/src/SDL2/external/libpng-1.6.2/scripts/pnglibconf.dfa @@ -0,0 +1,856 @@ +# scripts/pnglibconf.dfa - library build configuration control +# +@/*- pnglibconf.dfn intermediate file +@ * generated from scripts/pnglibconf.dfa +@ */ +# +com pnglibconf.h - library build configuration +com +version +com +com Copyright (c) 1998-2012 Glenn Randers-Pehrson +com +com This code is released under the libpng license. +com For conditions of distribution and use, see the disclaimer +com and license in png.h +com + +file pnglibconf.h scripts/pnglibconf.dfa PNGLCONF_H + +# This file is preprocessed by scripts/options.awk and the +# C compiler to generate 'pnglibconf.h' - a list of all the +# configuration options. The file lists the various options +# that can *only* be specified during the libpng build; +# pnglibconf.h freezes the definitions selected for the specific +# build. +# +# The syntax is detailed in scripts/options.awk; this is a summary +# only: +# +# setting [requires ...] [default] +# #define PNG_ /* value comes from current setting */ +# option [requires ...] [if ...] [enables ...] [disabled] +# #define PNG__SUPPORTED if the requirements are met and +# enable the other options listed +# chunk [requires ...] [enables ...] [disabled] +# Enable chunk processing for the given ancillary chunk; any +# 'requires something' expands to READ_something for read and +# WRITE_something for write, but the enables list members are +# used as given (e.g. enables GAMMA just expands to that on the +# correspond READ_name and WRITE_name lines.) +# +# "," may be used to separate options on an 'option' line and is ignored; it +# doesn't change the meaning of the line. (NOT setting, where "," becomes +# part of the setting!) A comma at the end of an option line causes a +# continuation (the next line is included in the option too.) +# +# Note that the 'on' and 'off' keywords, while valid on both option +# and chunk, should not be used in this file because they force the +# relevant options on or off. + +#---------------------------------------------------------------------- + +# The following setting, option and chunk values can all be changed +# while building libpng: +# +# setting: change 'setting' lines to fine tune library performance; +# changes to the settings don't affect the libpng API functionally +# +# option: change 'option' lines to remove or add capabilities from +# or to the library; options change the library API +# +# chunk: change 'chunk' lines to remove capabilities to process +# optional ('ancillary') chunks. This does not prevent PNG +# decoding but does change the libpng API because some chunks +# will be ignored. +# +# There are three ways of disabling features, in no particular order: +# +# 1) Create 'pngusr.h', enter the required private build information +# detailed below and #define PNG_NO_

    + +

    Adding New Builtin Tags

    + +A similar approach is taken to the above. However, the TIFFFieldInfo +should be added to the tiffFieldInfo[] list in tif_dirinfo.c. Ensure that +new tags are added in sorted order by the tag number.

    + +Normally new built-in tags should be defined with FIELD_CUSTOM; however, if +it is desirable for the tag value to have it's own field in the TIFFDirectory +structure, then you will need to #define a new FIELD_ value for it, and +add appropriate handling as follows: + + +

      +
    1. Define the tag in tiff.h. +
    2. Add a field to the directory structure in tif_dir.h + and define a FIELD_* bit (also update the definition of + FIELD_CODEC to reflect your addition). +
    3. Add an entry in the TIFFFieldInfo array defined at the top of + tif_dirinfo.c. + Note that you must keep this array sorted by tag + number and that the widest variant entry for a tag should come + first (e.g. LONG before SHORT). +
    4. Add entries in _TIFFVSetField() and _TIFFVGetField() + for the new tag. +
    5. (optional) If the value associated with the tag is not a scalar value + (e.g. the array for TransferFunction) and requires + special processing, + then add the appropriate code to TIFFReadDirectory() and + TIFFWriteDirectory(). You're best off finding a similar tag and + cribbing code. +
    6. Add support to TIFFPrintDirectory() in tif_print.c + to print the tag's value. +
    + +

    +If you want to maintain portability, beware of making assumptions +about data types. Use the typedefs (uint16, etc. when dealing with +data on disk and t*_t when stuff is in memory) and be careful about +passing items through printf or similar vararg interfaces. + +

    Adding New Codec-private Tags

    + +To add tags that are meaningful only when a particular compression +algorithm is used follow these steps: + +
      +
    1. Define the tag in tiff.h. +
    2. Allocate storage for the tag values in the private state block of + the codec. +
    3. Insure the state block is created when the codec is initialized. +
    4. At TIFFInitfoo time override the method pointers in the + TIFF structure + for getting, setting and printing tag values. For example, +
      +    sp->vgetparent = tif->tif_vgetfield;
+    tif->tif_vgetfield = fooVGetField;	/* hook for codec tags */
+    sp->vsetparent = tif->tif_vsetfield;
+    tif->tif_vsetfield = fooVSetField;	/* hook for codec tags */
+    tif->tif_printdir = fooPrintDir;	/* hook for codec tags */
+
      + (Actually you may decide not to override the + tif_printdir method, but rather just specify it). +
    5. Create a private TIFFFieldInfo array for your tags and + merge them into the core tags at initialization time using + _TIFFMergeFieldInfo; e.g. +
      +    _TIFFMergeFieldInfo(tif, fooFieldInfo, N(fooFieldInfo));
+
      + (where N is a macro used liberaly throughout the distributed code). +
    6. Fill in the get and set routines. Be sure to call the parent method + for tags that you are not handled directly. Also be sure to set the + FIELD_* bits for tags that are to be written to the file. Note that + you can create ``pseudo-tags'' by defining tags that are processed + exclusively in the get/set routines and never written to file (see + the handling of TIFFTAG_FAXMODE in tif_fax3.c + for an example of this). +
    7. Fill in the print routine, if appropriate. +
    + +Note that space has been allocated in the FIELD_* bit space for +codec-private tags. Define your bits as FIELD_CODEC+<offset> to +keep them away from the core tags. If you need more tags than there +is room for, just increase FIELD_SETLONGS at the top of +tiffiop.h. + +
    + +Last updated: $Date: 2004/09/10 14:43:18 $ + + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/bugs.html b/src/SDL2/external/tiff-4.0.3/html/bugs.html new file mode 100644 index 000000000..f09b7550b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/bugs.html @@ -0,0 +1,63 @@ + + +Bugs and the TIFF Mailing List + + + +

    + +Bugs, Bugzilla, and the TIFF Mailing List +

    + +

    +This software is free. Please let us know when you find a problem or +fix a bug. + +

    +Thanks to MapTools.org, libtiff now uses +bugzilla to track bugs. All bugs filed in the older bugzilla at +bugzilla.remotesensing.org (pre April 2008) have unfortunately been lost. +

    +If you think you've discovered a bug, please first check to see if it is +already known by looking at the list of already reported bugs. You can do so +by visiting the buglist at +http://bugzilla.maptools.org/buglist.cgi?product=libtiff. Also verify that +the problem is still reproducable with the current development software +from CVS. +

    +If you'd like to enter a new bug, you can do so at +http://bugzilla.maptools.org/enter_bug.cgi?product=libtiff. +

    +If you'd like to inform us about some kind of security issue that should not +be disclosed for a period of time, then you can contact maintainers directly. +Send a copies of your report to the following people: Frank Warmerdam +<warmerdam@pobox.com>, +Andrey Kiselev +<dron@ak4719.spb.edu>. +

    + +Of course, reporting bugs is no substitute for discussion. The +tiff@lists.maptools.org mailing +list is for users of this software, and discussion TIFF issues in general. +It is managed with the Mailman software, and the web interface for subscribing +and managing your access to the list is at:

    + + http://lists.maptools.org/mailman/listinfo/tiff

    + +Posts to the list are only accepted from members of the list in order +to limit the amount of spam propagated. Also, to be approved as a member +you will need to email the list administrator with a brief description of +why you are interested in TIFF so we can weed out spammers.

    + +A Long Term +Archive including recent messages, and most messages back to 1993, +with search capabilities is available, and +has been prepared and hosted by AWare +Systems.

    + + +

    + +Last updated: $Date: 2008/09/03 08:05:04 $ + + diff --git a/src/SDL2/external/tiff-4.0.3/html/build.html b/src/SDL2/external/tiff-4.0.3/html/build.html new file mode 100644 index 000000000..ad8e1893d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/build.html @@ -0,0 +1,524 @@ + + + + +Building the TIFF Software Distribution + + +

    Building the Software Distribution

    + +
    +This chapter contains step-by-step instructions on how to configure +and build the TIFF software distribution. The software is most +easily built on a UNIX system, but with a little bit of work it can +easily be built and used on other non-UNIX platforms. +
    + +

    Building on a UNIX System

    +To build the software on a UNIX system you need to first run the +configure shell script that is located in the top level of the +source directory. This script probes the target system for +necessary tools and functions and constructs a build environment in +which the software may be compiled. Once configuration is done, you +simply run make (or gmake) to build the software +and then make install to do the installation; for example: +
    +
    +hyla% cd ./tiff-4.0.0
+hyla% ./configure
+    ...lots of messages...
+hyla% make
+    ...lots of messages...
+hyla% make check
+    ...lots of messages...
+hyla# make install
+
    +Supplied makefiles are dependent on a make utility and a C +(and optionally a C++ compiler), so you will need these tools. +

    In general, the software is designed such that the following +should be ``make-able'' in each directory:

    +
    +
    +make [all]      build stuff
+make check      run the test suite
+make install    build&install stuff
+make clean      remove .o files, executables and cruft
+make distclean  remove everything, that can be recreated
+
    +Note that after running "make distclean" the +configure script must be run again to create the Makefiles +and other make-related files. +
    +

    Build Trees

    +There are two schemes for configuring and building the software. If +you intend to build the software for only one target system, you +can configure the software so that it is built in the same +directories as the source code. +
    +
    +hyla% gzip -dc tiff-4.0.0.tar.gz | tar -xf -
+hyla% cd ./tiff-4.0.0
+hyla% ./configure
+hyla% make
+hyla% make check
+hyla% make install
+
    +

    Otherwise, you can configure a build tree that is parallel to +the source tree hierarchy (or in some completely different place) +but which contains only configured files and files created during +the build procedure.

    +
    +
    +hyla% gzip -dc tiff-4.0.0.tar.gz | tar -xf -
+hyla% mkdir tiff-4.0.0-build
+hyla% cd ./tiff-4.0.0-build
+hyla% ../tiff-4.0.0/configure
+hyla% make
+hyla% make check
+hyla% make install
+
    +This second scheme is useful for: +
      +
    • building multiple targets from a single source tree
      • +
    • building from a read-only source tree (e.g. if you receive the +distribution on CD-ROM)
      • +
    • sharing the source files via a network, but building on +multiple systems
      • +
    + +
    +

    Configuration Options

    +The configuration process is critical to the proper compilation, +installation, and operation of the software. The configure script +runs a series of tests to decide whether or not the target system +supports required functionality and, if it does not, whether it can +emulate or workaround the missing functions. This procedure is +fairly complicated and, due to the nonstandard nature of most UNIX +systems, prone to error. The first time that you configure the +software for use you should check the output from the configure +script and look for anything that does not make sense for your +system. +

    A second function of the configure script is to set the default +configuration parameters for the software. Of particular note are +the directories where the software is to be installed. By default +the software is installed in the /usr/local hierarchy. To +change this behaviour the appropriate parameters can be specified +on the command line to configure. Run ./configure --help to +get a full list of possible options. Standard installation related +options are shown below.

    +
    +
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [/usr/local]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, `make install' will install all the files in
+`/usr/local/bin', `/usr/local/lib' etc.  You can specify
+an installation prefix other than `/usr/local' using `--prefix',
+for instance `--prefix=$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/tiff]
+  --htmldir=DIR           html documentation [DOCDIR]
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+
    + +
    +

    Configuring Optional Packages/Support

    +The TIFF software comes with several packages that are installed +only as needed, or only if specifically configured at the time the +configure script is run. Packages can be configured via the +configure script commandline parameters. +
    +
    Static/Shared Objects Support
    +
    --enable-shared[=PKGS]    build shared +libraries [default=yes]
    +--enable-static[=PKGS]    build static +libraries [default=yes]     +

    These options control whether or not to configure the software +to build a shared and static binaries for the TIFF library. Use of +shared libraries can significantly reduce the disk space needed for +users of the TIFF software. If shared libarries are not used then +the code is statically linked into each application that uses it. +By default both types of binaries is configured.

    +

    +--enable-rpath             Enable +runtime linker paths (-R libtool option)

    +

    Add library directories (see other options below) to the TIFF +library run-time linker path.

    +

    --enable-ld-version-script  Enable linker version +script (default is disabled)

    +

    Add shared library symbol versioning on ELF-based systems (e.g. +Linux and FreeBSD) which use the GNU linker. This is needed if +several major versions of libtiff might be loaded at once into the +same program.

    +
    +
    JPEG Support
    +
    --disable-jpeg    disable IJG JPEG +library usage (required for JPEG compression, enabled by default) +--with-jpeg-include-dir=DIR    location of IJG +JPEG library headers +--with-jpeg-lib-dir=DIR    location of IJG JPEG +library binary)
    +
    The JPEG package enables support for the handling of +TIFF images with JPEG-encoded data. Support for JPEG-encoded data +requires the Independent JPEG Group (IJG) libjpeg +distribution; this software is available at http://www.ijg.org/. configure +script automatically tries to search for a working IJG JPEG +installation. If it fails to find library, JPEG support will be +automatically disabled.If you want specify the exact paths to +library binary and headers, use above switches for that.
    +
    ZIP Support
    +
    The ZIP support enables support for the handling of +TIFF images with deflate-encoded data. Support for deflate-encoded +data requires the freely available zlib distribution +written by Jean-loup Gailly and Mark Adler; this software is +available at http://www.zlib.org/. If ZIP support is +enabled the DIRS_LIBINC and DIR_GZLIB parameters +should also be set (see below). By default this package is not +configured.
    +
    + +
    + +

    Building the Software under Windows 95/98/NT/2000 with MS +VC++

    +With Microsoft Visual C++ installed, and properly configured for +commandline use (you will likely need to source VCVARS32.BAT in +AUTOEXEC.bAT or somewhere similar) you should be able to use the +provided makefile.vc. +

    The source package is delivered using Unix line termination +conventions, which work with MSVC but do not work with Windows +'notepad'. If you use unzip from the Info-Zip package, you +can extract the files using Windows normal line termination +conventions with a command similar to:

    +
    +  unzip -aa -a tiff-4.0.0.zip
+
    +

    By default libtiff expects that a pre-built zlib and jpeg +library are provided by the user. If this is not the case, then you +may edit libtiff\tiffconf.h using a text editor (e.g. notepad) and +comment out the entries for JPEG_SUPPORT, PIXARLOG_SUPPORT, and +ZIP_SUPPORT. Ignore the comment at the top of the file which says +that it has no influence on the build, because the statement is not +true for Windows. However, by taking this approach, libtiff will +not be able to open some TIFF files.

    +

    To build using the provided makefile.vc you may use:

    +
    +  C:\tiff-4.0.0> nmake /f makefile.vc clean
+  C:\tiff-4.0.0> nmake /f makefile.vc
+
+    or (the hard way)
+
+  C:\tiff-4.0.0> cd port
+  C:\tiff-4.0.0\port> nmake /f makefile.vc clean
+  C:\tiff-4.0.0\port> nmake /f makefile.vc
+  C:\tiff-4.0.0> cd ../libtiff
+  C:\tiff-4.0.0\libtiff> nmake /f makefile.vc clean
+  C:\tiff-4.0.0\libtiff> nmake /f makefile.vc
+  C:\tiff-4.0.0\libtiff> cd ..\tools
+  C:\tiff-4.0.0\tools> nmake /f makefile.vc clean
+  C:\tiff-4.0.0\tools> nmake /f makefile.vc
+
    +

    This will build the library file +libtiff\libtiff\libtiff.lib. This can be used in Win32 +programs. You may want to adjust the build options before start +compiling. All parameters contained in the nmake.opt +file.This is a plain text file you can open with your favorite text +editor.

    +

    The makefile also builds a DLL (libtiff.dll) with an associated +import library (libtiff_i.lib). Any builds using libtiff will need +to include the LIBTIFF\LIBTIFF directory in the include path.

    +

    The libtiff\tools\makefile.vc should build .exe's for +all the standard TIFF tool programs.

    +
    + +

    Building the Software on a VMS System

    +The VMS port was done by Karsten Spang (krs@kampsax.dk), who also "sort of" +maintains it. The VMS specific files are not in the main +directories. Instead they are placed under +[.CONTRIB.VMS...] in the distribution tree. Installation: +It is assumed that you have unpacked the tar file into a VMS +directory tree, in this text called DISK:[TIFF]. +
      +
    1. Move the VMS specific files to their proper directories. +
      +$ SET DEFAULT DISK:[TIFF.CONTRIB.VMS]
+$ RENAME [.LIBTIFF]*.* [-.-.LIBTIFF]
+$ RENAME [.TOOLS]*.* [-.-.TOOLS]
+
      2. +
    2. Compile the library. +
      +$ SET DEFAULT DISK:[TIFF.LIBTIFF]
+$ @MAKEVMS
+
      3. +
    3. Compile the tools. +
      +$ SET DEFAULT DISK:[TIFF.TOOLS]
+$ @MAKEVMS
+
      4. +
    4. Define the programs. +
      +$ DEFINE TIFFSHR DISK:[TIFF.LIBTIFF]TIFFSHR
+$ FAX2PS    :==$DISK:[TIFF.TOOLS]FAX2PS
+$ FAX2TIFF  :==$DISK:[TIFF.TOOLS]FAX2TIFF
+$ GIF2TIFF  :==$DISK:[TIFF.TOOLS]GIF2TIFF
+$ PAL2RGB   :==$DISK:[TIFF.TOOLS]PAL2RGB
+$ PPM2TIFF  :==$DISK:[TIFF.TOOLS]PPM2TIFF
+$ RAS2TIFF  :==$DISK:[TIFF.TOOLS]RAS2TIFF
+$ RGB2YCBCR :==$DISK:[TIFF.TOOLS]RGB2YCBCR
+$ THUMBNAIL :==$DISK:[TIFF.TOOLS]THUMBNAIL
+$ TIFF2BW   :==$DISK:[TIFF.TOOLS]TIFF2BW
+$ TIFF2PS   :==$DISK:[TIFF.TOOLS]TIFF2PS
+$ TIFFCMP   :==$DISK:[TIFF.TOOLS]TIFFCMP
+$ TIFFCP    :==$DISK:[TIFF.TOOLS]TIFFCP
+$ TIFFDITHER:==$DISK:[TIFF.TOOLS]TIFFDITHER
+$ TIFFDUMP  :==$DISK:[TIFF.TOOLS]TIFFDUMP
+$ TIFFINFO  :==$DISK:[TIFF.TOOLS]TIFFINFO
+$ TIFFMEDIAN:==$DISK:[TIFF.TOOLS]TIFFMEDIAN
+$ TIFFSPLIT :==$DISK:[TIFF.TOOLS]TIFFSPLIT
+$ YCBCR     :==$DISK:[TIFF.TOOLS]YCBCR
+
      5. +
    +You will want to add these lines to your LOGIN.COM file, +after changing the name of the directory that you have used on your +machine. +

    This release has been tested on OpenVMS/VAX 5.5-2, using VAX C +3.2. A previous release was tested under OpenVMS/AXP ?.? using DEC +C ?.?, it is believed that this release as well works on AXP. The +code contains some GNU C specific things. This does *not* imply, +however, that the VAX/GCC configuration has been tested, *it has +not*.

    +

    The command procedures (MAKEVMS.COM) for building the +library and tools, is believed to choose the correct options for +the VAX and AXP cases automatically.

    +

    On the AXP, IEEE floating point is used by default. If you want +VAX floating point, remove the /FLOAT=IEEE_FLOAT +qualifier, and change HAVE_IEEEFP=1 to +HAVE_IEEEFP=0 in the MAKEVMS.COM files in both +the libtiff and tools directories.

    +

    Compiling your own program on a VMS system:

    +When compiling a source file in which you "#include +<tiffio.h>", use the following command +
    +    $ CC/INCLUDE=DISK:[TIFF.LIBTIFF]
+
    +This ensures that the header file is found. On the AXP, also add +/FLOAT=IEEE_FLOAT (if used when building the library). +

    Linking your own program to the TIFF library on a VMS +system:

    +You can link to the library in two ways: Either using the shareable +library, or using the object library. On the VAX these +possibilities are: +
      +
    1. Using the shareable TIFF library. +
      +$ LINK MY_PROGRAM,DISK:[TIFF.LIBTIFF]TIFF/OPTIONS,SYS$INPUT:/OPTIONS
+    SYS$SHARE:VAXCRTL/SHAREABLE
+
      2. +
    2. Using the TIFF object library. +
      +$ LINK MY_PROGRAM, -
+    DISK:[TIFF.LIBTIFF]TIFF/LIBRARY/INCLUDE=(TIF_FAX3SM,TIF_CODEC), -
+    SYS$INPUT:/OPTIONS
+    SYS$SHARE:VAXCRTL/SHAREABLE
+
      3. +
    +On AXP (and possibly also using DEC C on VAX) the corresponding +commands are +
      +
    1. Using the shareable TIFF library. +
      +$ LINK MY_PROGRAM,DISK:[TIFF.LIBTIFF]TIFF/OPTIONS
+
      2. +
    2. Using the TIFF object library. +
      +$ LINK MY_PROGRAM,DISK:[TIFF.LIBTIFF]TIFF/LIBRARY
+
      3. +
    +Method 1 uses the shortest link time and smallest .EXE +files, but it requires that TIFFSHR is defined as above at +link time and at run time. Using the compilation +procedure above, the tools are linked in this way. +

    Method 2 gives somewhat longer link time and larger +.EXE files, but does not require TIFFSHR to be +defined. This method is recommended if you want to run your program +on another machine, and for some reason don't want to have the +library on that machine. If you plan to have more than one program +(including the tools) on the machine, it is recommended that you +copy the library to the other machine and use method 1.

    +
    + +

    Building the Software on Other Systems

    +This section contains information that might be useful if you are +working on a non-UNIX system that is not directly supported. All +library-related files described below are located in the +libtiff directory. +

    The library requires two files that are generated +on-the-fly. The file tif_fax3sm.c has the state +tables for the Group 3 and Group 4 decoders. This file is generated +by the mkg3states program on a UNIX system; for +example,

    +
    +
    +
+cd libtiff
+cc -o mkg3states mkg3states.c
+rm -f tif_fax3sm.c
+./mkg3states -c const tif_fax3sm.c
+
+
    +The -c option can be used to control whether or not the +resutling tables are generated with a const declaration. +The -s option can be used to specify a C storage class for +the table declarations. The -b option can be used to force +data values to be explicitly bracketed with ``{}'' (apparently +needed for some MS-Windows compilers); otherwise the structures are +emitted in as compact a format as possible. Consult the source code +for this program if you have questions. +

    The second file required to build the library, version.h, +contains the version information returned by the +TIFFGetVersion routine. This file is built on most systems +using the mkversion program and the contents of the +VERSION and tiff.alpha files; for example,

    +
    +
    +cd libtiff
+cc -o mkversion mkversion.c
+rm -f version.h
+./mkversion -v ../VERSION -a ../dist/tiff.alpha version.h
+
    +

    Otherwise, when building the library on a non-UNIX system be +sure to consult the files tiffcomp.h and tiffconf.h. +The former contains system compatibility definitions while the +latter is provided so that the software configuration can be +controlled on systems that do not support the make facility for +building the software.

    +

    Systems without a 32-bit compiler may not be able to handle some +of the codecs in the library; especially the Group 3 and 4 decoder. +If you encounter problems try disabling support for a particular +codec; consult the documentation.

    +

    Programs in the tools directory are written to assume an ANSI C +compilation environment. There may be a few POSIX'isms as well. The +code in the port directory is provided to emulate routines +that may be missing on some systems. On UNIX systems the +configure script automatically figures out which routines +are not present on a system and enables the use of the equivalent +emulation routines from the port directory. It may be +necessary to manually do this work on a non-UNIX system.

    +
    +

    Checking out the Software

    +

    Assuming you have working versions of tiffgt and +tiffsv, you can just use them to view any of the sample +images available for testing (see the section +on obtaining the test images). Otherwise, you can do a cursory +check of the library with the tiffcp and tiffcmp +programs. For example,

    +
    +
    +tiffcp -lzw cramps.tif x.tif
+tiffcmp cramps.tif x.tif
+
    +

    (tiffcmp should be silent if the files compare +correctly).

    +
    +

    Table of Contents

    +The following files makup the core library: +
    +libtiff/tiff.h                  TIFF spec definitions
+libtiff/tiffcomp.h              non-UNIX OS-compatibility definitions
+libtiff/tiffconf.h              non-UNIX configuration definitions
+libtiff/tiffio.h                public TIFF library definitions
+libtiff/tiffiop.h               private TIFF library definitions
+libtiff/t4.h                    CCITT Group 3/4 code tables+definitions
+libtiff/tif_dir.h               private defs for TIFF directory handling
+libtiff/tif_fax3.h              CCITT Group 3/4-related definitions
+libtiff/tif_predict.h           private defs for Predictor tag support
+libtiff/uvcode.h                LogL/LogLuv codec-specific definitions
+libtiff/version.h               version string (generated by Makefile)
+libtiff/tif_apple.c             Apple-related OS support
+libtiff/tif_atari.c             Atari-related OS support
+libtiff/tif_aux.c               auxilary directory-related functions
+libtiff/tif_close.c             close an open TIFF file
+libtiff/tif_codec.c             configuration table of builtin codecs
+libtiff/tif_compress.c          compression scheme support
+libtiff/tif_dir.c               directory tag interface code
+libtiff/tif_dirinfo.c           directory known tag support code
+libtiff/tif_dirread.c           directory reading code
+libtiff/tif_dirwrite.c          directory writing code
+libtiff/tif_dumpmode.c          "no" compression codec
+libtiff/tif_error.c             library error handler
+libtiff/tif_fax3.c              CCITT Group 3 and 4 codec
+libtiff/tif_fax3sm.c            G3/G4 state tables (generated by mkg3states)
+libtiff/tif_flush.c             i/o and directory state flushing
+libtiff/tif_getimage.c          TIFFRGBAImage support
+libtiff/tif_jpeg.c              JPEG codec (interface to the IJG distribution)
+libtiff/tif_luv.c               SGI LogL/LogLuv codec
+libtiff/tif_lzw.c               LZW codec
+libtiff/tif_msdos.c             MSDOS-related OS support
+libtiff/tif_next.c              NeXT 2-bit scheme codec (decoding only)
+libtiff/tif_open.c              open and simply query code
+libtiff/tif_packbits.c          Packbits codec
+libtiff/tif_pixarlog.c          Pixar codec
+libtiff/tif_predict.c           Predictor tag support
+libtiff/tif_print.c             directory printing support
+libtiff/tif_read.c              image data reading support
+libtiff/tif_strip.c             some strip-related code
+libtiff/tif_swab.c              byte and bit swapping support
+libtiff/tif_thunder.c           Thunderscan codec (decoding only)
+libtiff/tif_tile.c              some tile-related code
+libtiff/tif_unix.c              UNIX-related OS support
+libtiff/tif_version.c           library version support
+libtiff/tif_vms.c               VMS-related OS support
+libtiff/tif_warning.c           library warning handler
+libtiff/tif_win3.c              Windows-3.1-related OS support
+libtiff/tif_win32.c             Win32 (95/98/NT) related OS support
+libtiff/tif_write.c             image data writing support
+libtiff/tif_zip.c               Deflate codec
+
+libtiff/mkg3states.c            program to generate G3/G4 decoder state tables
+libtiff/mkspans.c               program to generate black-white span tables
+libtiff/mkversion.c             program to generate libtiff/version.h.
+
    +
    +Last updated: $Date: 2012-02-18 21:36:31 $ + + diff --git a/src/SDL2/external/tiff-4.0.3/html/contrib.html b/src/SDL2/external/tiff-4.0.3/html/contrib.html new file mode 100644 index 000000000..d138900a8 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/contrib.html @@ -0,0 +1,209 @@ + + + +Contributed TIFF Software + + + + + +

    + +Contributed TIFF Software +

    + + +

    +The contrib directory has contributed software that +uses the TIFF library or which is associated with the library +(typically glue and guidance for ports to non-UNIX platforms, or tools that +aren't directly TIFF related). + +
    + +

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    +contrib/vms + +scripts and files from Karsten Spang for building + the library and tools under VMS +
    +contrib/dbs + +various tools from Dan & Chris Sears, including a simple X-based viewer +
    +contrib/ras + +two programs by Patrick Naughton for converting + between Sun rasterfile format and TIFF (these + require libpixrect.a, as opposed to the one in + tools that doesn't) +
    +contrib/mac-mpw
    +contrib/mac-cw +    		 +scripts and files from Niles Ritter for building +the library and tools under Macintosh/MPW C and +code warrior. +
    +contrib/acorn + +scripts and files from Peter Greenham for building + the library and tools on an Acorn RISC OS system. +
    +contrib/win32 + +scripts and files from Scott Wagner for building +the library under Windows NT and Windows 95. (The makefile.vc in the +libtiff/libtiff directory may be sufficient for most users.) +
    +contrib/win_dib + +two separate implementations of TIFF to DIB code suitable for any Win32 +platform. Contributed by Mark James, and Philippe Tenenhaus. +
    +contrib/ojpeg + +Patch for IJG JPEG library related to support for some Old JPEG in TIFF files. +Contributed by Scott Marovich. +
    +contrib/dosdjgpp + +scripts and files from Alexander Lehmann for building + the library under MSDOS with the DJGPP v2 compiler. +
    +contrib/tags + +scripts and files from Niles Ritter for adding private + tag support at runtime, without changing libtiff. +
    +contrib/mfs + +code from Mike Johnson to read+write images in memory +without modifying the library +
    +contrib/pds + +various routines from Conrad Poelman; a TIFF image iterator and + code to support ``private sub-directories'' +
    +contrib/iptcutil + + +A utility by Bill Radcliffe to +convert an extracted IPTC Newsphoto caption from a binary blob to +ASCII text, and vice versa. IPTC binary blobs can be extracted from +images via the ImageMagick convert(1) +utility. + + +
    +contrib/addtiffo + + +A utility (and supporting subroutine) for building +one or more reduce resolution +overviews to an existing TIFF file. Supplied by +Frank Warmerdam. + +
    +contrib/stream + + +A class (TiffStream) for accessing TIFF files through a C++ stream +interface. Supplied by Avi Bleiweiss. + +
    + +

    +Questions regarding these packages are usually best directed toward +their authors. + +

    +

    + +Last updated: $Date: 2006/01/03 01:42:30 $ + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/document.html b/src/SDL2/external/tiff-4.0.3/html/document.html new file mode 100644 index 000000000..73fc8af3a --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/document.html @@ -0,0 +1,52 @@ + + + +TIFF Documentation + + + + +

    + +TIFF Documentation +

    + +

    +A copy of the 6.0 specification is available from Adobe at +http://partners.adobe.com/public/developer/en/tiff/TIFF6.pdf, or from the libtiff +ftp site at +ftp://ftp.remotesensing.org/pub/libtiff/doc/TIFF6.pdf.

    + +

    +Draft TIFF Technical Note #2 covers problems +with the TIFF 6.0 design for embedding JPEG-compressed data in TIFF, and +describes an alternative.

    + +Other Adobe information on TIFF can be retrieved from: + + +http://partners.adobe.com/public/developer/tiff/index.html + +

    +Joris Van Damme maintains a list of known tags and their descriptions and +definitions. It is available online at + +http://www.awaresystems.be/imaging/tiff/tifftags.html + +

    +There is a FAQ, related both to TIFF format and libtiff library: + +http://www.awaresystems.be/imaging/tiff/faq.html + +

    +There is a preliminary BigTIFF Design for +a TIFF variation supporting files larger than 4GB. + +

    + +
    + Last updated: $Date: 2006/07/10 18:13:52 $ +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/images.html b/src/SDL2/external/tiff-4.0.3/html/images.html new file mode 100644 index 000000000..150ed0c42 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/images.html @@ -0,0 +1,41 @@ + + + +TIFF Test Images + + + + +

    + +TIFF Test Images +

    + +

    +Test images are available for most formats supported by the library. +Most of the images included in the test kit are also part of this +documentation (albeit in TIFF rather than GIF or JFIF). +The images are kept in a separate archive that should be located in +the same directory as this software. + +
    + +

    +The latest archive of test images is located at + +ftp://ftp.remotesensing.org/pub/libtiff/pics-3.8.0.tar.gz + +

    +There are two other good sources for TIFF test images: +the contributed software contrib/dbs includes several +programs that generate test images suitable for debugging, and +the tiffcp program can be used to generate a variety +of images with different storage characteristics. + +

    +

    + +Last updated: $Date: 2006/01/02 23:50:44 $ + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/images/Makefile.am b/src/SDL2/external/tiff-4.0.3/html/images/Makefile.am new file mode 100644 index 000000000..840e1495a --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/images/Makefile.am @@ -0,0 +1,46 @@ +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +docdir = $(LIBTIFF_DOCDIR)/html/images + +docfiles = \ + back.gif \ + bali.jpg \ + cat.gif \ + cover.jpg \ + cramps.gif \ + dave.gif \ + info.gif \ + jello.jpg \ + jim.gif \ + note.gif \ + oxford.gif \ + quad.jpg \ + ring.gif \ + smallliz.jpg \ + strike.gif \ + warning.gif + +dist_doc_DATA = $(docfiles) diff --git a/src/SDL2/external/tiff-4.0.3/html/images/Makefile.in b/src/SDL2/external/tiff-4.0.3/html/images/Makefile.in new file mode 100644 index 000000000..a78ae2fe9 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/images/Makefile.in @@ -0,0 +1,526 @@ +# Makefile.in generated by automake 1.12.4 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = html/images +DIST_COMMON = $(dist_doc_DATA) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(top_srcdir)/config/mkinstalldirs +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/libtiff/tif_config.h \ + $(top_builddir)/libtiff/tiffconf.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(docdir)" +DATA = $(dist_doc_DATA) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GLUT_CFLAGS = @GLUT_CFLAGS@ +GLUT_LIBS = @GLUT_LIBS@ +GLU_CFLAGS = @GLU_CFLAGS@ +GLU_LIBS = @GLU_LIBS@ +GL_CFLAGS = @GL_CFLAGS@ +GL_LIBS = @GL_LIBS@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBDIR = @LIBDIR@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTIFF_ALPHA_VERSION = @LIBTIFF_ALPHA_VERSION@ +LIBTIFF_DOCDIR = @LIBTIFF_DOCDIR@ +LIBTIFF_MAJOR_VERSION = @LIBTIFF_MAJOR_VERSION@ +LIBTIFF_MICRO_VERSION = @LIBTIFF_MICRO_VERSION@ +LIBTIFF_MINOR_VERSION = @LIBTIFF_MINOR_VERSION@ +LIBTIFF_RELEASE_DATE = @LIBTIFF_RELEASE_DATE@ +LIBTIFF_VERSION = @LIBTIFF_VERSION@ +LIBTIFF_VERSION_INFO = @LIBTIFF_VERSION_INFO@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = $(LIBTIFF_DOCDIR)/html/images +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +tiff_libs_private = @tiff_libs_private@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +docfiles = \ + back.gif \ + bali.jpg \ + cat.gif \ + cover.jpg \ + cramps.gif \ + dave.gif \ + info.gif \ + jello.jpg \ + jim.gif \ + note.gif \ + oxford.gif \ + quad.jpg \ + ring.gif \ + smallliz.jpg \ + strike.gif \ + warning.gif + +dist_doc_DATA = $(docfiles) +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign html/images/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign html/images/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-dist_docDATA: $(dist_doc_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ + done + +uninstall-dist_docDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(docdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-dist_docDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-dist_docDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dist_docDATA install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + uninstall uninstall-am uninstall-dist_docDATA + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/SDL2/external/tiff-4.0.3/html/images/back.gif b/src/SDL2/external/tiff-4.0.3/html/images/back.gif new file mode 100644 index 0000000000000000000000000000000000000000..11d0c35f4671f6086d992776c7521efef880e914 GIT binary patch literal 1000 zcmW-gKWN_t5XGNTq-cg9Ar)LgJSnMm(7^~n2LtBPLMf#uf;dDfV&p`m?p24{>frr~ zj#5jgaPU*9dUG`BP%BCY|D16tMMZQGTts+&^S$x7d+*@$Zf*VXhnF|zFo)l;R{|*D zKmY|az_BX=6}TV-C1?T1QBkPE6`?3aD>&|pLmlo2M>*QTQB(pN@IVAA&;gE4QqY1I zqELk{aI}|(HoOsyYIK9+O+qN)L=Z(Z!M#IGU@LiP$p$s=4DY6KAgm0ih7bV{dodS`T2XLqs_Okpb1nZYb( zGszsnGUQ^2z(9KdJ1`t@4P+n`p$c6X!Vi zYS4obtY8N@CP0c>^kNjN*hP-9kft`h8O>^TlVer}|G{cd9R!Bip*__7dmpg(3)ue+ z{`%?P<&PIWfBm*QCRcvQ_jk_D-re{7^Y*1LpE$5IdH%T<-kiQMyY%RPYggxYE=-Tt zV;7%2x^lkeUpuY0-@1Qh@!;j%bCZqx7M34)dH2SJUv~~~UpzCre*NaL6DN*MCi`aY z+V|G&fhqGaP`COGkWCYXVa~7tKVMnqX(W`jHzDUmFbH=%iJrQ z1LZ>t>ys`0;;DyTI`ZK5rN3{kZ~ne^_SDw3(?5Rt!L|36Hm>f@T>tabcaN-07FRdF R{^R?Pp8n+BUk)u`<$t1E;KBd^ literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/html/images/bali.jpg b/src/SDL2/external/tiff-4.0.3/html/images/bali.jpg new file mode 100644 index 0000000000000000000000000000000000000000..1f5c146dd5ed78b6f0f227773214b78aecd57c81 GIT binary patch literal 26152 zcmbrlcTiJZ_%(_Z>C!uSm8SHLBIQLC1O%jaBApOI5dr}MQIy_ZsnSJ+&_WM2fDnpO zg;1oEAV`%21R{iR`Q7i%cW3TjckVrzWG0hy_GF#&?ES1~t!H2SxLBpRZJ?{KOLOH4 z4b7Fy7tO^2jn3t_|9{8-4D$bPgv+ZhzR(_4FxPJZe?1;mmgI~W5P2#4eXJ&uQ&EpAcKi4;YZEkIo4i5hu9iNc@p8gN6D>T>s z_bvNh!2Tb&STAv1y?*`Lb=v>Ib>(Wv<@*}z^&5BOZ?b8d(mDsQ-&J^Xi{tV8;`$ys zVMQ|{r^~AedM*(qyeR2^p#7i7{@($M`u~LNe*^o!am~{(Ub}Mn@UF4aXwgtt{M7A3 zr1q~a)XaJ0+b=mRJ^C@Xn~&uS{SGpOikLt+%oso@E3eP-sS7f+zq67;vQM~G7G%ZF z6vl?tFKFCj+zoTY4(2yBaQ0&;4&QOchG>Pw*0_J(@c#N$>+8oooSgkN=Na3mfb)8O zt6`p&SdhFj>hrPgvf^#8-)3IFg&#X-e{CK+=W$_BTC%ZbcjnHc!aU5i-tL42Y`|GR~nENVi#`vHTe{cW3^34+Cf(HXtzmC(h zt75)<1Dly8@%ti`l|6ZM#4zX?co2Mj0411+WGET;hz?xOrlgAP%mm@m#u^ z^RopL?Z&U2!k;5-Q$r|_)rvUIzNw-h>n{(7R+$4JC zrC!{o&ue9TuYXnPE(u$$%`r|XLi9XEtX5pmaQSw7?OCq^znE~gV6|epX=R|Pv}Ei+ zB+m>Ir|c&{t~oK_10?V5!EIIkQsggaZh0Uz>sNudBJ!}r#Z4jU31z=He{#ZppGxFS zP5Si<8kd!Y4ub5L?l%ZQiUz@i)n>tK`6d~#_UMA5%8CpV`M^3=H`V^!iM@hG6RTGV#7&#Z46#s`y%U>v|~nIYc|nD?5MNV&-~uSdH-(o2Yi5~=26{;g0UVRp|ANs&UL5Hd% zQ;fhykGG#JpR}-PV5_+rbeiVtS+N^>5+(v>@u+nLBWmh3gX7w^QjDd0GX-=(6J-*K z1Kz%%0Rdh+X^{5&3W6c71V$h~9O4-c6+;Guyrc?d8xxm)M+0J%*g>VXWWV0v4^J}ry^zy2)V5Dow7lj8qCMBJ&7wKYyeR{ z(G*jm;lvUJD)PMtOi1*b0_B26IvG*!(HdrxuO5)$^}Vl`)7~Mygzv|P$Nv65^Y0TR zu({jHQd_N5@qP#KRQ&T3RXk<*hsB^f&v-eZRC@pxI;F2~LMPFjUi?7KSAc}nig+Bf zX|WzHYXmVIxxJ^*J1OP+VyHMn>G=VNM=-DMd(#_>x2yYk@$4*(de+fXu3yi8;!4K| zX?bZx6-M)6q*jJ8W;qq#^jaiDp`4>A^l=oYrlOA@R|%00~Ss#}~bp zg@aaEgeag%Zav!whnV(33rsjaGw!%qkK#c9$_ z3AavCmECCNq*bko|+2xTmuSva|f$N@@Drq-I+S_8$9ghZ#BF> zekdbU59J)`d%IfFbCf!|I9nC% z{uQ49rUVwUeIqy2h)WI;{|-EoIkt@mweEBEa znI#U0&*FO!s(nG@kN+y2^*-;_Ub3y_e+}FR1-Zdd`i55*UX;^`7&Z?5P5p-8)qLv`v9qE$vk}>9$mik|kSD&3;5Fx%CvP=btmp7W-J z1<_W@dyqG&yk5(?P%NRkBnCUo!W@Q{Y*!~iv@2QWUk!Pi#-0|#70K(wM#56l0aT<3u#6|l#eq*rR1IT+{3RceswPN;vZ{H!q@C^{zgsj*}D6^;P%f*{xQxs zG$!onuUZL^QZbBrL-{`Ef3*Q$*Q>GevtSKCmQWqs|FLn1bz&v65XOaI<^+vju~fkw zRZa0iLng4nEKo1`Psf^?qxYoKisSb8t@qlIGS2B{a)uzrvG~unk1uEz0Tfn0DuXTY zkV?->EO|~$?bC2IBI@m_;(4l-y18K7jx&FLKmlCFkfU2#O%x5tah$A-Xjjz3-vA%3 z>_})q|5sdpuHLbh-aB&1jsAx+EUH=Ttm#uD;!ZF)Q|KV~=(`lL%hm91mPCg0o@;z5 zUtlJYn9P@!sTo$4_PGm@icx_B`f|FSMh_yq2gNH4Vr0+~pa>wlfFM1YqU=_w%J;$G z2&uohubWgaGj(24dd}Z?}B7q;{c7DP>8?(#cw- zIZHpKxxKw>hBxcICl!`#N4}e|kMqoL@JgdjgwuA$-Bv_WNK23FJ4d2CT3XX1ni>g) zF@6fjG;^RM&@&K$TtUa@E)$rv^oe_2 z-8J5-T-jV)e2>P#enH)$kt0P!f9qZ0Gh2#p16h!0ZbeQEjG#?!N~Kx$F1%0ljK?s( zCztfM2e+xl{=)4l@2Q>{+e?nKgIb)}XHwAM5^p<`IDnD-CU-99;(WD`qr=+WQYjyA zkGY8Z>*ORZc3wKydq9@Bk*dj_Rj=uUiu;wBBv=ARhJ{_(w%&r8wO)tb+dzti!f7i! zPcC24M+KZXw9coPsUFEM(rY>30hMcjLn}Mc1%vs&(>t;X9~?qF13{0Z8W#L=rO8ZE$92P^ zBZ}FDx(R_CT9~nHU~4>G*1Uv{}dvYP87ibdS41=D*Nu+R^a)O4|Gkr7zUcbsA6?0&gbnEY`?$3P zUQFgIzGuH(RIM7m;1;sIKDQ*VzOI%a(x3!#h*jPtV{N(AITw*9K5i|C{}$X8-;-%Z zZSZ3L+v2ZIvk&z(TKdwuz&Xr7r%Mb74meJGdy>{vbDodnXQ5)ooVc7vkajg~o2CH8qETLI8?oyCTZKX-nW9gKUY+7$e(($j+kZ~nJ=AxTk%Mql z^+UxkIRMd~W!`&bEi?Ny`hq6<64yx_TFR#5fD=Y4>;3?Ti{Ut%rsT4@KC%+ zoxAP75;2Z4B@kyo92`+@?>%0=9esV?tFg#w`tFP}4DwI*bKGu_N-hEStf8)+&vO?s zm>LzyK!y?>c0!tio&ISfmStCvRV_(n(Is1UvoZT{PXt18o14#aKMrcRWUf7Jry(|| zoA$RFB3*PQ_P9OxEg`&9@_EPKU&r4_MHKeN)!Ck+xeJ;>U>zc{iv=8cm)O$3&>3z{ zvc{$+ofakM_43iaOUbE$*=v&+?J`*VS1ug9TCpaVZ^)?Y)m3km1&Ym=G|y5f6Z-s1U520k;lX&WrNmTamH7pYc56uAE;GnJ zreb|6fH&COc8z1rAd5amC`lm~U1!$+aH7vV1#mB^R6t0Gvkb3YnOS(14`OPKjlbMLMtAK?4E^e~lT52>^qJPaKp34pqQ#y_A zcx0>osMrW!AZ$0IwDVQ{a^y+4USJh)yWK5UvsUVKJVtC1x~I0LR|ukZUXo$m6^i9l zw`&B8Ejbl$atp@Ydzu}ut{+aE8OEk9_m^)w(RNK0ryF;YW-=>)J1TbK@v=wHj_l72 zBlykK%AMkyQ)Q565QwnlQlZMngSjb_ziz@B(>K+p zvpp?P&xCiUJbmxp1~K6yCoqU%J?DG^jm7(%4=}R~VGnY7a(|47UFAvOtXOk@_#);J zLwu1KE$gnR_H2o!g;M2tJz&?7=xXOpU3IDQ`5Gl*0XW^cn`$>F*zE)!UBY~ z<9aV>Sc5KT*ypywqPHFAx8*kHyAmr!ms;X>rC!bi?Xx?Ldj^~*2TMbl6ra@>SttxM zPGHOD>@KUyB0jCXwKHk$Gk)qAm7UB&#P(~_oL6Xh@T0;`)>sBLAaJHt21gT%S@iv% zL}Z+@YyyBW$d8-iNPZi@Nx=?)%NJE*ODOVhtw}7eF^?bw$D89{3dMSmZM_tf3O-9~@g^e3bmv&51Y)Kx6_(cGRv`7Q)kCEL% zU-Rh&&1-cKBHR-R;!`(z$u;{Tl{_8~7g|#v#Ru>{D&*(XQSHN3#r2S7*A z^-DdaC+C7@GS!v-LCW|Vv;t5OdYp__bQd(f{w>Kc2QbVBDgl#fKr&mF2;8tStF^vj zE;i^|$Ft}wlwT1zJzOuBEb$<2ZK?v#MgJLZ!uc2zAbVS(JS+I6^t4}-y1<$lJx9de|@`Cv;<67^ z=N%mowFQeN8)cL(Kd-MJ+ll_W6>__~^;CI@3xl{NO^G z??D9;^D|nEn_(JL;EH~-^mXpbxKa;XV@cAyN#s5TVpllGhXY+2iP(1IPL`P6E(1csD91pd1wgHsQ?QAaCJ8!`vTS3>)Xa2hmKO!19skSrY&LnHHrt}EUvY>@zpAn{lK1-|`(IVt}=jEV*V?Ph#jh9>jhNFW<}sMk^uWX4_L5t873j zAykeI;&{}OazW_lnY=Gys`1p>z`%p8T+gHKGhH~SnM`}81&5x0to>t4F>)pvuAcPy zB^<&KM!An}k{Gp^)rC>8%3u0wsp+9iN%Ki+k~Vs<=EKh9f)Pz0?%Svlg$tU(kd#Of zxNP@%GF)`cPi3WtDo@d_iQZ` z#s38Cg{kTYZyP8&FZO84sk=(O*RygPw$t=#^v#}mH;DnqwV?E9jJrGvK*X2J!pUeFk%^llskKua9a zDJ|i?b)`qmAG2Q#m)r8}%A%-j4$}F*%mzp@*I1=gPq8VrsYuISq?ohQ!%XiFw!?Hz zV`#g~dwREL#F=7WWWr{XxcIX$TF-j|khFNYACZ9mm&6s~+i2wLpt`gT>iDNRC4cCe z3BQ`ZzlGdUy^R|B)#*`%i;z&4&=DfSSZntwxUwgtU96B~zZ(*G*B+x_j6Ku%C0F0t za#)Ja{B*E?Ctmt@PEIgSUx+tx7+%l220lyG)B*Ehf}6ir|4WDJ`_EC23ETJgOQ`R2 zyiuRNrmIDi$uA(jmco_To2%Dznd9`=jwfr>9jhra)$Ecp14K_4mHl#UEA-X8>(y?AOpR0^ z&&tx4_&KyBut)$^P4;o(cVCpu{n+WVum$BrG|vn2cO z6AzQPVa4hWrUK`~q?-&3@jcFm5)EU*@xxB+G6l93E~KV!1IW9?dmnKE$I~72-T7l+gx37r?mTQ~RUd#040C2hJG7^kOT%%}ow3<49wzn7Ud$p7H z?@8EaHTxcvH@C#eZEM9dO|KQ9u1DT1B(MWnovK09MHYL9vAlsRLh<Y+qfX)yyFA@ml>xbUk2W)+W&>+$C9{rY*jID2M6(h=pr^Hh`0$(T~c6D zw0|t#4IyDR*2VVt1%Q>OYie3t`{pAG--oC!m_N&c zraa0^R!}%e=4t1PJ4j-4qG}ZmzIL_ha%UFq8ACZ(3TXI<@$)lUiPNpyyp+&}=Wh;gmye z)RVIj4!J)yyxnH;vEn?eOOaK#-RxKuxI0y4mM?04Y=4=uC<5I?F#g8x#4{O~>uPG> zfE0|D%o%GF(^F0ks-E=K4x<45!2P5g>-@D=1wv5&31>ACu>L8sW#*-TcZ& zNq+I+Jz|wvt-*tPQcnVuLD|H@asG?uUr;>)bq;Ni@iC^hGfsj!MdzKc=)VOe6wlO)3zec#wpTmVYn07W`k zR32+JsHXmL>|MPak~&T|S+RHT)c~i2%N8{!eM7)JlZdVO@N=k8i&kKt zRiAKQhc@e_q=#akL8jCoAg=Ik42w+3ebZ!19ag&syNpf}oFIaL|KN87(Oh;xxCg+e zDg2EX^~DHfv}(d+16R%NlWI@@hCja~U0ihyxc;gihMZ_>`eiJ$sv!LYs=_O1Qy#2C z52RM35Vy~BxIO)-z>{f?U(Lz!B#d>}P!zaxzAyM=lr$Tlu8AiJ#) zVqg&kk@Uqmy^w=tB$3_bJDjUoC2;PCw;H;P1@abgs;wCEc5);!62=^xk0utxv^|JI+z+`otBi6Z`ir7V-wf zykCfwRQ7)D8^!)3IS7=?oZ}3=uKNDRwhGtEyqZoAA#Z2BsjE5n$t1~bd=|xK?EJ0AVZ>L(HkV@Oth%yQCtMy$bu@N3ht;;XW(|$jqlX1pLNkchpxYw;y_X}!Tb^eh7}3lIzInM=gqP_#o_mHQfj!(iu-DoEGlAMHSO6EHHqUb!#b zf&Yh0kd0VdqG_VBbb$9Vk{REyn=0CGI(#rtpHXr491F0EVPQ`keCc@K${-!lh}rN<)h?6>{_^YD^ie7k zEWsYu1Qhf-6>9@me8aa)SIf%OsP0T)Wzs8GTB1wqaVU|lB(F*DQE(tPGV*d>*aH`| z2D#^#6VL9$Uy%HEtB8g+6PQPrnl7y-`*yp!bueGG5bq>PU9VP~L_garBuI{OpF$r` zxlHDr=}Mxw^&MrOG)>8VZj3N|@i)Aun_(Yg`w2F_7pXFf2Hq&Ez-t))wYSJK%e6OQ zgVks#V#^4RKq9#Vr_0;J&y(i$O8)9gT^&WDVUBnIENIO&8k21abQJD2hMSYMK|66M z8R|m7U6I5JJ9{U)1%l09u~#i*f34lHe9~0OPqcH`9*voB_-i2_3Se+0sz0@tv}~k^ zO3g}qCAF$c!$r7&amWnJ?=yoAN ze#O>S6kR~6lo7@;hPiG2Xlnm}MLH}FLWRApPMSluAP2fds}*qmN^mZ44&o~f7ba9V z9ZWYZJqBU)!R3R2m1Gx&QH28reV-uksK}OwmtWJ4vs@0VODp#Y9qsqkL!N-&Tqrvm zbu0aEW=We;j$uQV6$43;^*o1<85r(6SDJsSXHQye+ZtqL_Ie5s)r$>q64>}tm)5`f zAT73GL^QDvPi*y;#||Zj5+p@Kty4ttl2cVlSwIO=79elIIe@K1BA?PSa6yyI_bXvR zyB;&kw?k$9dB&Vp^A84%Q(97d9yKr*^yBWcz2fk<0#;^*-iIQp{@Zo@SvJ32Qon1m zZg;7XQwf5!PtspZsXx!vET|pG%I(Xxi^;FTm3oZmlnmmecn+}_(wQ%4RK7jlYa zBVbibt4-6t4&2Uz&fj)>Xt-LD13yuoOq%@|m+l-(_ER27*F$iXs+0#+?I`1LRt;$r zSsOU(XEiTFREz@8O9Op3wu;-%66QD=tF9R&`)JrTm9K7WTlT%kn6`uMD%H1!NMyQl zRk(WV&6^>)CDKp2YI&_48psaWaf(vEG)L+~GdR_ipX&lR4Vm6mm_^^PmL0LW()++$ zAuU6|%e6^2cOq>HMS8c zicZpBnsL|yg{`BqM1u)G(Knt=lb;}ZXI4Y@OsuHc<5Z<4W%fy(ZS;?Y@`dVj=f?@2+*2qW$b3pb~*2K zkbbTXvaDS4VSW_*D=cICaR!MkT1~0S)UwEzMI{E9Fe>-ZN`gl{Qk-96;+?;w!oZrR zK@4B1y5)_80(y9cm)YQp3|EQB`5^F_kGq6vl{U4>OAFn7Y16X9by~?G#4}?wi5Z2T z?#Ol^+S`r>3L$SMSMb!b>rX+dsr`rm(Z3xasGzt_JI*=h`TV=yO(S<%Bf;$GYG@~a zUzgwnq^3)N@-MnI)!xy>e5&aYf(Avfsj2m2YJ5UqGOhVEo6vtI*Kim2#-=>hR>EcUu508Y<_H{$rTKS%0TEcX5 zoC8E-a)b6nt!*K`$FmM?R>bA}qK2Y|?qrNk^`#w_NJ?25n2A)!DebdR%*e>lPjGs& zDJgXgaunSX^QSwGugNZZK=#@^g_k&!N$kM##gQYbwsMoGqUXh$0^0|hX^XI(XTcNJ z&l@ll)dULTz&Kl7z5q%2pu(&dzc3;>jZ6%htYwBjp8{DOe=zutb-C=xfT=&PbaAO~ z4gG#PReFBq3qrs8CcS07x_=hnVW}C~q|&X`P7&*JueVg-d0obO(g2~@z)0ZYaO*UG%rjFYQ}k)qA- zE4Hny+g%r6QG;epnEG%p_t__r!V^+Qf)aEx&@14Q+Q?DFwMZ7w;gaY|%Aft)I{`Hv zNQw)F7#vN~>P2uuSGe4jHl;D3FhDvI0GdgM z3(h#L^hF9ZwdJl@O{selu_naWUp9d27~`zK95-cob6e;$vqG6B;kY6e!o6=+h4#@| z!Ypr6B)RP%F2an0CgtXdy?X4q-;A@YosgU4+RrV~hhJ77)H1w9nssr@^-T;B1NvXe z!L5)FUe^7{G?yIM;7RJZ5``Uj@$t}yi4kJZDqxO%Ijw5WPp_4#DNNMr>Db}#=7#H$ zZswJ4bDy-BFT(V#)~xGd%{o%%|JXJzqR*GI3Vcpp=^b~VbiWVK&beBrEpJ>oIO$(` zGcyVEfno7*l2 z{Fb6?ux@Koa4}&N*vm@3GzkeQsM?)&>8>{<27F`{A&2r15`NPTFdUJ(>`+Cwi+~}1q5+NE^Ns!&DrT!M$~|m2PS??H+47y|17FT3)o^) zuQ%i$@Qyt+VWH2_6uWKfqd>Jaui*V&b?dQ>_gJPKyG@1V@qZ_qPMFeLRIuUTZ7Gy=h>C2=W&1|V>Ym7UPe|H{{EI# ze}rz49RZ2z_dNlrnpzYaa%dH5x)grq%N_so6Og9yI*J0c0_!UgjjHo(b!VEVi zzG!Obnj(;BlVG~b*GfmxcUz9;gM8ls9$QlTwV@Hw^8)1;Tt^B zqcO>kddnUTRsN+43_WPJQFD0u1p`bP2OO7Oin|T1lQrV}Qo~HI`>luT8vDMFfOUE3 zEQ+-t^nW2dGo^7E-n}pffebJ51vZpPHU+6uR1s4y_|b&^SKdllY>Ao&qw5(BEq-lRWZ>BkFpvzk*AL%w!Q zdZtq~d6vyBQ&LBU$#)4H-R-Rfo|(UzlV37$PP}2`)y$oZq}y2*BBHxuOM##UL%;Hc z9z-Q@!Q0@ZShs`AXvLRMQ&!m1L2#56IGMyubVNDE^*>h0kmDHRcBW5*lJEjMt+;%=n?mAEtzhk5Nf?LOR_EeJCWM56d#Eb>l*ld88ye|e&Ad2zvme2b3Pg7-SH7_y^{5N7P?fmXc$7{+1SwHWQ<_< zo=^R;k6Leq7%au?e9u-if?NlCWmN@e4hR{2taEFMVpUh{m-;4J{Yv+4`_I~@PUErd z>h7{BPLVQuhAir?>x|;NDy;a)qNjfW2xUKR5{P>rbWDS7NX|(*b!Fe>Kum#U<7gjB|};PEsY|V+R=; zxPydz^8)L9|IiKR6brA%rONkl6^!O6zTZd z;@i;Ou|g6!U$j1|hGGK;ID3Lr(h(IaSX!(-%A62cxf9u3=e5C*%+lMQ+-F4`4=;ay zs$S%sHR|5nlA3UifkOk=Oy=_jsrQNd@gFhY2U9+hxT7&oOTR%NS8xFR$)If6M{~kM z$JT1n8R*Hs#`ceWiZah)s$%wLZ%>;>h^ z^y1;BHOsJ}a0VOq)EA_O6O%hebUp))Ay06-&)F_$J~6cJ*C<=ceq3Dq#&|;7I6XAG zd#_pvtW`)AA`hC9p=-n zpz$PI>K~Rbegey|j^htRlLV+CdsVWyL=z-HW|3+qtV6FcY_vB zb0x!fzM0MUUT$$9DFM_fTqG@Rd{l&@O7=h&?_4q;PFI+}*X0!5E!&hZPb^aMn$fqa z*z@}K6u7GJ+=&w_-9xx+n|PR|${F8F*v7Id#}#t+c5!t|X*hW|dA}%RE_KjS)}yaF@wKtFdr+IE@i=|LgRB9`2YyZW;re)p z>R$Hy9t0v3o_OOtqxt>9zb&Zph{6L~v^^LsZTB-W1NP|ol%_aEom}d<#_}$0%dT_k zHo3ztZ4qQD9&1ZcM9Sejr$*{Vh;|MRj-wHk{cc$;S={30O)b$sJN3IoE@)QYhutV0 z-@9|B@7>OfbVaN#(V9+Tv_2V$)*yqj?IP<5ez)~LZs!K2GUX$@Q}u|uD$P}h^ZabZ z41MmcO%9de4v5MYj?7 zf6^q&{r;SFg0aUl+zK-3zvj>fD-u6IBej8uut6(a+D}PzSB^U}0%j@BpTC--WKQG5v)WaMqlh$tNaq8S& z;`_j;j^rw^tM8LYU6`t%PaGcJTJz60D%@ZW#I9{l4ppqD*XmpJ48=$?B*Ic5_l)x` zwsqeY+)}BS^bg!HwJ5g#+k0LfDN12#BSK=MF<0>8e6VJ%*lsqA4~bk4=b{3>Yd+dM z?M~T;7SX_p2)>d308Ku2wH0sfiFM=cP3UyRTH8A(o0#kda99%9E_N5Nt4!?17V&HH z!r1$?=%_N@TC|v_p{rhKAhUQh;EN|-^_`|{liE?{GFrCBu!wn?EZHx=**?&M(jj~h zC4OoyK`w&lg_rHMp`QzA59=a_f{!ov(i9LvCQ)dU_$&l5)@HjsI;HBo=p&4}EvPAb zbGPpMpRCqYgEJ`?X`n6cPWSXGNvCup%eNK{*j@15q0*HQ$XXs+DMj1}Pa_LZ;hh;c zC&3Z;0!`A`OQ{kZ9Vilbzu65TF2`yXLU{byZj6YzpVaRk6ZpY&)&j-4%+>WxC6AHE4~c+dg$Yaup;KoN(8LmpQC!<+_YPa%D8>V> z!)iRq-NcU7?GhlwnUXT<@S&FE|Y`7O zR|6Yc!LA<}S`Y_{KaNETk)@xM$0L_^PBC3V4cY&;L>P;auGF(sq7meK<9#OAy_~L1 zDAmU2T6V|XTjf-s?rT+{-J;v9QmEE>^Bfb| z5jUW3S+eW@Fa^jv_4AASpG*NsDwCEM(=|LY7UAc}hFx93Vpn%K$zk8^z0_{jmUx{O z4AhdY^<}RxHFYROElWQhtufd+Chn-rs;ag$cyZ4s<4itx7192Hrw$-Epq=8qLJT-~ z2r&d3X4QhPy}At7#9>T>YOn3saV18SgRCx9r(QLGT+@9tfO!X3lc;_;=Y%;eORWHX z-_GU8;$}jI&-T?OX!1{7+QC|}0D+<}?ZL>8;K0<_cG`EJVvUGh1%#af8(8x<=wSDx z@}teB2s>GJqtZ=nXn}}M@HX|Il;LNsb<~l@gO${7dg?tdEq)9X-_1_WhyB681wSB2gWUL`c{IzRmSKDMY0)2FAr2QNm#Sz;b|^mi+Q<1A+-h(l{#>uGJvK(&RKO1IU&K0GvTdb^y=w~&3*v)iDGG40Af5Ob zZYkgUbM{r{h@Z)QSJn?HFnW3{6gIHEubvbF*QQ zz~ym2kxA`ZyLnLaiR!#h%WMc&w%vyWuy%w{P1^A(OD`-EAjs0U!UloXGA@|}dMQQN z;q+5fr?L!f_Rt(tN()VGnNTAer>^{2!!kpm^m33|P;k92*V;3LX4^DeH9YbTv1)O7 z>-!FyJt+G$bMlFA8Ml_3Yamlh9u%y8!cac9%~v|yBi+OoeOyptx7V(gTzx_F5r5zP zlBv5KK3|iG5tbM?w^!X7)vr36~w@?uT9#wU?)qi0gJT-uy@|QgAGmC;ldvpJs3q$9GeA zWCwz^WK>1egD=Hj>=%yM{cVnIEvF0II`O<|i>V;vQb6q5%Rl1nf7m|BO<Mh&kfWKZ+QPAItQU&rQq6C*RbR-%wjdvkh~|Y4(FuqEc&|Cil@)KMT_%iwXw0N z_S6912Bij_RBDUUHCMN_KQ;WelLU_DJ=QGeXHADb2{Xp(5bEcZ4aiL6G4fGRjF!9Pd+km zCM_@WBDfh(nZYdTBq1N?uVpucX693c5~Jl|bi)<5?OwM9H;;E8PTsT17B(4Q+frue z06>3c1H=`Ym%iA@QtNO3p5bcFm>FToPg=(j;qd;8kBjGOLTg!dgo$Vyh5phqrfF|6 z+ct8PSBVxDxe{hU^%PVQuP&VFSCeF!#cN)bap-K#;Yj7H51?>Up+C= zKM8sgM!cv51!{?S@pOz6mx;E;4INXyJfiVf1u!zCcM?-DzA1-5gp8%4m9EeqC9?wa zNHpeM$c_E=Xlm%0q563uDy}->vz-_ucVpv9LTR>_du1hA(;Lo?{$?= z;k1eIaLuf4utQsG4tq_eTc&Vr5@2|#T-ED8lk15*L(;RKNzXM#_E>ztIs8dJUW2>W zLnzvw{)8DD6iyTZ_ve2==(&-5nwG``t3%h0)MlP*kAKM6KBT-hn8+qlXa1hCZp~Tm zCIw>@_9rh0Vx-uOij|4>*_WJM`n;|lRmAvsKCBz7a4-o*lafQL%%844wzIPF=yKK9 zdsYM`h6T4-h?fJz>zz~Hy8D*swso+cTISjjW2skU(6+%0`1D{(iLL$BTSgnNPV||J z^shUtUh9RwX99|o7deiDkbs37U6dj>?)#nOpq~0Yl40**OiT8I*0qDJ2AQ-f7vtda zguEl0o|IcFn(x|M#;&qtAoJS5i(hzt))!mprb!uZD_S%`uo>@MLE}MoLGZ?qg%&L2dHlDkXE&O2Vl1s zi1aVE-duR7=V5};8*0Plv%?$qgfVO~^>~r zb9)@*VEY@p9WzYkp%+*tqKM;to`@*9u8X!faXEsoNW!(O3ejeHs*3iz!EVWT_VGe} zt7}y+%2#jLmSGKtt!H6Wr4-=xV+1p6xyx(P;{~xuoW6j@%umhgx~mV?lCaX=cWh|B zWq@y0M!GH5aUb(!5D!fftB);DaIx2zgyq~6ydTDS1}b$S_B=D+vS9Piz3+j!{~2aB?Z&ia=gT$mHT!43B2P0VLcH}+;7RDKOG2n99RgB2D0f9w(K~Z zf{$5VOa$jI_R%_f4_URc#l)&ge~yp}C}YOG6IO%XTKKoEg#`>%j(m!Q$8DoKzfEXJ zSleZpW|#}UBHU;}hqG{^k6qz?x;-yL7X_TB5y|^U9z4mo=334Gp&YFltJ3n#yxe3Z z#bYHFeq<5lW}rTcdny*BXGEL8=okL;CQp5>VL z+ykK?BU_t7P2~4YFKk=L*G{A9gBZ4iC#gU&b`S2P6S7O`au+Ki<8biN3(k6eJtbOMt zDSH;+F3oFRRyXk&!6~S#UfF-e$BD}d(Z*_wQj3*-X>FCz`5A>$9LJ_LAUfO1WMZsT zfZ&3pR!8ph?{us92OSFgzlyI!_F+@??hN2(jlQQlO+_nr0OOa>mMk)jOb?}~wV#j~f6qwt_|%@==xM|z9s`O5K{1z| zLy_zjp(MUt0v#Hznd3oAF)ioP{7TXL2@eYDS(dC5tbV;A>$UVAg0`1Os!I*-_dIz4Z2Xw3TUUg_9_blnjar*EX(^M zBC}r7#_7&;R-(>%HO=C>Vam+66c%br@D)z}#^@fJ1+5`iQ&Bw}$Kdf(!%xdnA^~7{ z|IUT!n#QHio_PH3u@;7D?U8T$O}#3tld_cN{`U;=Fwl>Pdyd7C|X__^c9%;z|! zhfPDh;7mAsjxe^Wk>-BZ?;FxP zQKcW`>Hz;?T?W6rtZk>XG&jkfY30x;=R)F)eyqN66z%R4-|vaYVs~^XcfchghJm6j z$V+WsCan1(8yfU0-ie<)>zWO%dLF``>&k8;SE>pPS7KXvD4}MG$I{CR9QPc?LbJP{ zL6ebGw>z8LablZEiZZ?(qwjNmOIH|k4Nsb3{PTQJ5klK2mZI6Cw{DTct8bTWwn|>5 z^%qulLOW{8M^Rnwy$qgKa6IX7q;EOFdEE2l8Iw-WGGgY^bnWkLEA8O57_8bgEJk->)0S>k8@gV-K2um!3{Yd? zaZb)GO1p)8!}7`M54ynDQuTzjP3zOo#INZfP6M#}AjYD~^d?E!-v3A!5%`ot$muL< z?Neo#x41q1%aOmQSlFXC5cKWaNVVm4U*V2y@w#;3IRo=HrWIb+#!BEpm2K{%tksK5 zgsZWE{OvonH)L(ExXToZdW=};&ZoZ?ni_7&QCpn#KTN1E&%(}aD6fY=#Bds3-Q?2F zal8AYMZ5R$6P{ym0Q^B)H;O=miU#GR*C|LPSywR=j;z0_Z#y1(Q$e3`8bRO#`=HAs z+cQljViNxa1R>Q11ga0y7OHBRg!t#oUs;~?Ff3*7;~QM9MTR0+|8S6e;9JdNC^0T$ zzV-8s0k{}gcm))ksyP~Gxx(_p!4ir!J$|PXT5;5N!rEsN{1U7mpq)(Z`r=j79KBQkMY84m|k>P z3N812>tm(f{+K6rKshVxdo94o2Ky2X7PvX6+W-4b%{BN8nD0|xe;Bk}UP`nkTKY%{ z`RQh;)U#Ml`nlW%)st#N=xjz3t0euS={EqNZ%T_|JgJ)qo#*I1y*e5u5BZF*I0Yc$ zX8RoTVoHd4j=4e6VeEWjNkXgKQ(6q|Z$Rw;N$ooNg)X1va=bJ;!tpoih^e$aH#Z&d z+w6K(L<@1FMUd>@QOy`N4zBQL2-UA2yfVWKRm%<_CA$^fqwScBAJ%)|FC53BD}7I#Shw(*z+^M7pRoBFD-53?T2NQ`6^)(riMpC88W zyofgTgVGK5=0Sa$d1>)Yq{k#IsBB^LsZiqwOU2^l7R@|YQJ*4o`TAt|Bv^IxX~@iG z_~S2_6Qm$3@Y^lesF7*8>dS<0;bpk&&~m#K9$fK+Z$#V7g53IacUnWQU7B{Ua-p%X z4O&zHYENqzM7s3A24Xtp$F!Zc_zDTn%JdgNy@h2;e?gk)~Snr3%lkR4W>p+#irZRIQ3OlaO zC9~S}Ck&}&&V)%3ai;fCPF-wP<9oH2K8E?_7zxxa-RUktnIiWX`<}ug|C*uxWM?~ z12vMLHwN5Yq6-~!>%wJ!aVbO8EEQS*)LN>^r5!AtoId}+92{}U?Umx(J|}9=nAD7X z#9Hz2>x=vb;xbwKnU_{3=|r<8lo}VZ!-3h@vJQ__Y~8q5=eIp>E@*}X>12QP6kBEdVSRzW)eT4$ z)7#A8?M{mU=vw4x!K;Ap;%d&GwN|K&C;B0$+r@8ws~VW@3zR2#w&}4!xILx@yMc&o z7pna7hF68>W82b85eYZ2i4{o|)`~bOKfovbg!r2__lH9Y9=iH3K|Qb6>(qGawpAjc z0gs;$zEJ%=p^hcG`!R_VAFy(xShoGd6u*9XR>z`)`G;D}f6Pl8G^I`UI%)zXX+bAL z0g(luO0y7&t&aCeBzU;Q{Qh{ZF0QZ**L!g2}>2 zlQlaiRqub!IATi?I82a}abpX4-|YK@k{}T(B>2?qal_ERT8`yP#(n8IS?x*H46&R?f`lOokw7YRQHQ&E9Z<&{7f-F`-R&C1Qf*7Mc$)h%69l5MN~fC17|6O6Jcy>6{4JkfF_DZzaGnm%&br~Q{%Lf_a>gT7-p;oXI^Dt$}zeHzo^g;?JA z`~7R`P=M71ks_GgW<=`##BH1BjA~1 zPFih3vevKC}$(``*j zeI-3J8Uh`xWfQZOMRg|^!=H?Ur>fxLe&>Ng1N4^Ae;RL&Wb$Nvva!E^yulu~{4RSq zlknAEUi?UULLc?{td$pHai}#%P^jL$jPi;E7n-GL#Az$Ch#Yg1YZEegU%BgvX$;WY zKo{JHc=q;$pgYqT8JE@MlJo_79?budf=t{}yS;AOacn5rOt)|AuH1m|Amr)i0(DWKVzU>-$d?_0*%(lTJ7h}a zY76RqR29gtt+PFDMlXM;0<+oUlNMs1#i%`L-YX4jppY5a%v>xO#3@J%c-q49)vk0a zF3wNSZr(SNtUr&R%+U;&xmi0Q2tiE$Z@YH4XTA6%6J9!y&~AO@yG}Z+*spCE9OhlT zQkpt+^TC8LxhgSTYU9nO*J@JjTN_+tbGa$E6z(>_sPGocdN$JMrBCY6rPQdLJ*uA( zF!@iTpX=YnOKpkQ)HtNn7Jzt71?$^V&4*P~ORYI>kEO|}dut^X3Yb@~+l6l2KdEf# zp|!?`S|=7a=Dt+iiy}#x(Atfi<&L5>$S((Fuk zw`&##DXVZv3VRTJw`besNC0uxgEc@n&$`PD6EwP_mRox>P1NT{=Z2JK z)&E$GH6}uRp~%SHdtkF0Co7GHB=_Va(Bj;uBaved`dtq{$$#nRyU~~Ht27D=a&zll z=E1jv#PnZjCwqYqQx^pRr0(TbS4;KUQzRmc$|c2H+GjYct#2v*8*+2zLj0YYouGY!y)>{ay(dZy_|o1dE5#7P6D<#u>REBkz9eqzBT*l;Tn?`(oBRbRVU0*seH3behfz6>y6ovIknxj|8S1f3_?pF#m8W+dLNYt)T79FqUkVA#^PY3fbRoDT8iBu=8-Ay3yn@k%wb_Ax;p35qm9hvb_?p;GR{@F@cbHQXW#aTDT z__`xlYrEpe7%~O;+2N4^ltU=?L-J>5kJ_T;J;g<{)8pXH9H^@4&`q%~tC@o$HP;1M z3fQkzWmb-8SQ?w`47~b@Ng|2|B@cMgqqPbrNo`IX*%P(y5k=hm5RTqspXWHs0S=?H zF9{DGM;n=*H-6wIaHpC+PMZSTUp2=_dkD2*^qqPI5Lzl#@4Om|_=vO-K2JI`x$>=r z5u+_#s=^8#Xd*3!TI*XA-eAtz7RqH-n8(Y|`G`($>Q1?6vA=iwVx=-?27?rSg&vIU z@KN<*RP`()nvVW7i}2~-Sl;j23W%(cKOLw(?aG?-4SK~;98U;I>?!1j%+itSr&U>CKazeX;Ur*%gwb8XF^x1vsIGU;~YfIf!2hPWA|Ae4S3F{xmrGL2e9w{bCBDEVV(a z<5+~etudqkCxUx{6}4`gcBUcK9&@g40cvNVuzw;H*Rt2tgn#+TtRRbgvwv|GMeNF- zDD_dQ^1Rye1S;*F17~!sJayH5_?{VMZyFjx0;J?H`M%BJUeOluGfQ_Twn2Y=i5ucp$v(}3?_KFiy>y<;#pFD~7Q ziLwsS6vG8%vvr!j0u8mqsAbHSD}-HCzxb%SH2sIwc%WB%r;%X1K)#5EfuSABJ`My) z1nC7?UC?sO5a^nG!>ApEwa{uBm+y?;_i&iiCSIdlYOZgZzW5ID%&@C zZ>~b4ba~K9N@@j9Tu~~0EK&)jOnfhrw8-%P2mklI=a3DM8Jq_hu0>1c?&Q4gLSW*HuNAHgQC462j; zU~97~mlgw=p53hcOH}Vzo@q@xvZW6sDXFubn20QJ@!jTk?`a2dc!N^c#Q@Rl{gdJ; zKxo@up~NHHj*u;=DxcYUmys)Ukmpc-2xIu26tUpbA*$cUO(Y*eKR|^^c4$Z>eupi{ zH0C>`A6PZy{4@*p#DVAjBYz2d{4jG25^=G}VZMIa`oR0>f3aVYXMvK@l1!A(Qf>SK z534OxC7ZNoc}K#~;x436%wjiis|l;Bp4t(8AM`Iw{b5{$Ta6+gBx7Onw{`NO*|F^Z z=of^9avoD;)ki`s+=Eg-)0l^QvRtffMJ zB93Y;z|1%L78=U3(@{>egM=_KNE&e9ZYx>CgF7H|WB2bF?|E2wB$#`v_~^g6=%~h% zcgH?7EYY2VK9Z zJf<+HVr~QulbG0H${N1J%Tu?#i8hE@0+>5FzBnBy?(Q;FyDli&H&NJM@?m49`#mE( zFTSg9zH)Ix*S$C-iVIICJPqJT;bU9ir>xXs$VajJtBP|#U;?4fv{=uepe@h|~#s$V)coP7S5LZWA zddc;x(-D&%9Dk%&cBWB8k2A+wRFdQXRbBKHtymw0`T2Ur#Z5NRcmj7!aXP3Q!h98T zOBiy~qA*mO5{Kh{*mlG%z(}JR(;m~E47+^RKo!JrdXdngz|zGpP6g_i0yT(3s(%P%f^- z9PZpPI*ISQ|&%%=#HF6h~dT+ujvN5k61JRwyKu zNd^kq&Kd_l&is4kW-u}t4<#1pB^7xVO%^k1JOPXr5gYrun$XJcDg$T}hwwq{>x#G8n<=09Svy=*f~R69PeFKDuYLKFU^y8w_Bw4I2DL}K5H z@_w)_k$Q`Qi%(F+@OlMvv&q@LSvF6*=SXNL8-7@P2K;9%nuj5($f_2dy_3E$=qy7H zZHzLYGuH@o|Bt3e8;WSN^@SqCP;`k9|` z@}%!0(DTHa^j#}okj@Mwu{q7{1t|>RzDKVp$hseK!+y&nH5Eo}|j2bm8l- zJN17$kI{bjhhGOe>dakU8)0~i?r^hKucak&mX+HAl(9tS##FT?f04FB>gkt3gVwr2 zI8YDjJ(z$#nBkw__@5ETv+*EtrW=4iGA6%s@o9efa8cN{Lx+5Mdj*b z1;WJzF~q9P`M&fj>GLlH`S3Qb5eLd3&Tzr8=7G#Oj(oFYjH!#y-L%zDveT0+_ePUhrM+~3!{G8DReV%-)+YdsTW8|$w!$vQHdth!}hc+wF3{mqXdxkpxV1#^B^ zKAikeG>5uhVX37`yW_#&bh#EuE=${jO0!W11C#UaD@EQt5U$yrX{s*KfOB_rRqSCp%Wu zg)A=&&ORQzsVH{m)Xni5*1ec}bLH-&oxQEMrGCKjz<~6OfT-lqvJATW5)D%qil(WBrKP*OJ55_# zC(Mf;rdL+oq?2agC-mQ4v^zO931PGKOib;8|LXsHSw>LFYZaFEhWkb$_sswPF7H}v zX32$zg?6Tq^OYtml$lX|AM>v$W$&z-_M8niJ=cEbK@2=(30|=XbzQ-B)#S0wN=n@= z{Fgu;d7gIW=AP!2u63+v7R%FZ=Mw*=#bz#UD=gS&+Lz{-X}GgZ?N}B|-8D|Qp4nq2 zu`qXa=-tT2Fs-xA4ND@_uo^UQJV9;7JX)f3J~w)=e%VxKV1%3aRpW`CM1appCXS z_64S=Z;+Dkt7aOg*=yhuvT3&MzqKAW^Sk`h9)tcec&)$jq@keOid5q3HqEJ z$inzEj-WxN)2v5Y2$kmraWqui0(Gt~Q#iJ;+=57JLgjsI_U&-8hQqqg=(rh7F!6eQWBqXyD>@6bU_PXG#{ z`fQi=Z+o>h@~;w$Jt&Xrp%T>u5d4PP#d(jiv4L&&Y1ol`L&+g9u3N`^ng9-*1W9hs zrp1Jdr0cCz(+ouke6V?7lA7Gf39w)Khc|DUXv0L0m(cLXUzINI^B@Z21$i!NMN#YU(W3ujV9w$Rj@AC>qEs8Q6mn ztQn7rK`)Xm!_1?Q534UhXagD_oo610T&*!r*VF81*$Xdad_~ zt;-`T50VcgP~`CWqNBpafdMs;!#_i@wf+D#lTKKTx-Wezt31X0j090ctA^)^~br&KG$6^o%m?qkwVwf-3;KN5r%Sj;E83Ewu^@%MwcRlnv za63B!&fy#lYDTPqMLEnEkpIuQNJ|4y9OZ)q-!6PSz8j{bqX0R!t4OD<2@hZp@EL=2 zq;fn@gx9=?*y&&ZE{g_%5<$Vfc?eZ~+*Y<3zdY2K4?tle2*}Yiw-|qz9Rlm6{K>_L6AUV z09BNMg-U|+!b>8r#)etApD@^lClhK;3`?ml52jW^$G+^>DHIU(LRtYDKarF}=M-=&5(P6}%Ym%JI;6KJ z@FY(RTz9GX18G*f;s;9J@P&p=tzrch-Brg)fs)gUFrFrdHvE(vp`ZmiA{*Q~TD>W7 z0`^eIt9M}5m)Qwgoc%`Zp&?3~{eaGePHs#t&C%E%0OL+wr{vY(HQk=;u^0AeTv2F^ z;a-@M4Ddz@I?1jLpR$1+c#zspS#KXiB#%I3k#-R-Ux#R-0Q0v^sOVd}5_E=YxQFlj zL;qq@WKr)KObrpi#z|z{%d731FUYGU8Ec|P7bKA}%3;DzCD9e(lDv6U*$XYkPPHX0 ze}rs1B+(-~f|6Zab4-?DH1{2I2Blc{M=URKDVH$ZAV;M1X%h zuC1vL=<9oiuR0R-A=J^na+O4ideZJ?I>MzdPfHw{itai@N{<-+Qh2yoYh}#0HJ*R6 z5&rFAMN`&dv1nL;|9%}ZdHW9ticrrI8TX+76-Sl95P-85fxl5c2Af2n5H$_Zr1GUY zO}t=-e2t%P`H*I;RiNth%1UMfd-n-qyi@tGTF7wmobL@pG=D2UmSz;Ob@q14I755$ z;IONsbZnzR(5PKnpcLGEwUpD`W-@1WS83e%WrrekgHsnfrO(8 z?^kFt$)1Mdj;LF<2I_7#V2I9;e{eyhSaI~&&fUtgBi*IfJWn`nlBU8R;|>pa(I}Z; zS%j~DlmiV?^$3@i6_?Z2qIg?VsVdqwweS{Z^3#H$n!jz=xN&dB)aR}05`vDQ=d#Ni zat^P%o#Jc6G2JV0JaRgam>FAp2yjRI-vV=F+vpP8s^(YthBHG4#9?ZHHULWx-`y3| zFN~5Hzxj3BmtsRWRGL`5yY?j~*fN|ruouJ6`hl;6{l0@|cl`7H1kv2A5+7ef@I8E= zSjIKJY$7MbN#Cq{{++ANM#vZ5)s)$e#FuYS6ifTbe!hl({At)HP8KRpA2?nAg{*V& zeN**F$@c2FaK2b=K^nEe9vj>t5?{k%fWs75Gss=PO~7So#)(4$2Yv*0eEnY|HyeLL zFUdLUYd7cT$E|MNTk<%n9sD*YV}<<#wlki__C>rbIW93c+J!77o&PKdHxy}Wn5xGh8f@tIh`XS#_=uI4s=InZeW`?N<6B%fY~ND# z!9`$x(AZ$Xv!F+B^HuIwjw2sBRu^+d}LMT3kX9*qVe3Wx1c$~-ADY6c-E4)Ak; zVX_9`pcUyCVGl%;)CG9~1k+@yRlkiSXGOG&W5g+drT`IH98Cru{DHe>URU21)Mi#^ zB!WGqaK&O8^Pc&^etMI+DCpyn#(au#B!Rq@X5qD?t=Nnx^pCq>*`Cj#D%Vv?9j_@} zu4l8{p06A1B4tVr2MXa=gTp^vV>G2DPtq7r6n}vQU?)Y z5Q}!nnd}^dcc6i%tpMI~Rra6|moTuqT)N?zE^NeEbFAFuUj<&Pd4Io%IFUj=>R!gN z#JQkkFPn|$qg)O9H4+4*Ai3HK9qJ~UmOm@HhbAa%hIvt&sxDFj6>3erXpD?*!1EyY zvW_FMmq5?Udx+feHJ-AiE49HZEI&5^h02I%(bDS2jFw>VjDUKbPtp{T1qsx_`a@c* z=4bWzs)e+UA(R9*9vh@H{;{IPr;$hiL4&=WFAaXX5PanL8#s``nLHC zxH+t&T}hZj4KfYQ>!h>-;>Ic&{)>RZmih=#I@khgE||w4_F_SPq^|3$1Py!%5PeFY zr|J^)bLig)-1LD z0|{NmD$h_!sh%Hdd**b!UrJ!vX?$mox`WtAyAE`$0iR~mOch7_0J?`rV@cw zqSQ@6slc~1kA-bI0>82Eq~upd8iSyr+1d-uJE}kHl)F2RalwrWdU!XXb6|f8he#W+ zwG)#w6k1F9rL#f+b3VF83qj;&7S2?6!MP5EJk*0*=29jr$A50bt9U}%Lcfi%-17P) zl+(S#Sxq;$JIg>0xhk|i3RfDsF)qi!9+>x&8nwS|lO3ANr}|Cs+}*<-`fYfJT^A^4 zqt-2H^-q->JeYCXY~{Wd%njCed$b5e-Z#F`Y>+$dQ5a}4dLwYP2j$0BBZfN*R=Aj! z2=%_Hom5&`VVhn$yPR|f0XbZ!SMjCXy6w8LA_~$Gz1|;lSr3Zn5E0h#8d!@a6cd?%E*~`pR-E?Dv-kqSnXDj3-0IX35p{{tY z7QaNMC+jyZi!>F{#gc@TzB&3I&+tiI`hoZIgtt{-&oCHM3tItdziJzC zoaWgrVCk{KynEN1*Mx9cF^(lB9%R#}!#3}<80&e*WqeKM2?JQf8S967d-Y{q45gjhW_4$hw2ee>}+lHL+%8qFkWJ zm7r&HTu0n=uOZ@sLW1%2pv@7{wCV4``h%eVCD&_g>$#JqGg{(8?&bMG>n}VS*bO_0 zAOtlrFSb`t@bKAw#8@jWK&54W>__fKWkHTMsq>z@Kn6bg=FghpSmzMd7FrE-IvEI@ z)>X-qggR=lo0G!oU!Ea{Ua@r6we@S3a4Oih9`?nwOcvbcTj67#PF70jv;nxTmvp|4 zka;GtXo>uX4shdSI;gnzembzpW$;~xfssO-I1heV@VNg78_30*bsPT$AkQKV@0FP) z%OPia`mLN@paOm~xNTJ7Jlqy_i{HUGsOHp#=10+AcAL+;MZ`V<8-30{e@-Gk97xD-`coLmXK@a z8YGi7U33mvm4~*{`XZ5(lLkOhTFt}^C0n2DTv(FjhmK!a2bxBKP>J_+k(nZlE_ z+xLoMm{tj0h7$(@b@j)0N0|S3S|2Cx;);RUYHyw7ik>3QKjCjt3xhNoDPoOd2##To4Yzhe zg@@7!G`I0c8+8sy!~x)klHX#1ODqWCgJz697C4wD;315l@1&r|`@N$ryR*0LV{Qr2 z+wy+mFx<81@7T1bvcKWm^6bEYH&r!k8(!u06u?qe^?L{L&tV&ie9{E~O)pknkL6kN zW6W`jw_-sZEuTlvp-1Q5@j;!g3vn&f(%T7~M|T2Lr+Twm3kk<8_NpDR&GeC1OkBUK z^{H0-Q*3=@Ni6qz3Z#>3xYe=5*m}8n{VE!={MXQA9&Awbz>z!M{z`17;#qG`io9JE zGn)^!l6(R~KJ0GQKgCOBTw2CTdKvF-*Uby<*PQf>|LtA#clmdVqhD#BW@aG zBCBKut2L@#jAL}JmY?dQlaK6mK~&hm2aNEp&nd`|`o&1Q1)xML=*$+dJ{o+yvkJPb z6JPtQJN#FurKa$mPEU*$URK{Sd(u=2d)KTG$84n0c7V6boj3PQe{c{arMkEuaNkzvG>V0uD`&UJvSee%B+H4XTaj; zjwz|i=P*uVu5>sNZ`E#zBhC#5tE=zZpQ7ELntbAZE8(Q&OL%T;GTM(Xg%aeOP7;z% z;O@Rmd|{a+%}g$PnPN7SICnNt8H6UDNQ8eSU**7XG2gk2o9-R>a&9h6a@xFcs?}is zk70Q3g0@lY!H|iXOGWqth9r@MG%f^-)R_MHbQcR5Tip%t{Ll zak+Ssv*%==b(=#s%X>v(n>Z%J zkNDC3ZC_Iy27x*h`|k@av{I(}r1K$;_$&O#MMa`1XSNXW90t=3>c30fKQQ#hk%-C&t>Ob2*ft5Cs`B=UdBtxVGwq!QDNg?@N@ zf^=q(9US6(T_e1WXQK72Q7qAFcoH(G74fUBR6S)D5#v$OI6;cl)dkorTTldQF%JoG z2BMt%py}0wWU*DQ%o_S9gd`+s9)bFa^c8*LI{grturzR);M1LDN7r2(G|2Fb#095% z?hm&+DW5)LB$7_U^wZc0f}!@p(5)4j9QvqraktPppq72T9vAemt2myJ@60x)8FNi+ z(-guI?d+eQNqmp^ND0j}^Rw8+Cs%-b<@UL2uy(_AQW+`m)HKC-om!~sUP@(#?o$J* z8p{a`{ld_t&*B>zcIS8v5}Bb$^F!^YgeZb9>RS)KkbjrIkjeKR4Lperu1{tiRQS#)Mj?XoAk>A86T+5r4)6t#Dp+&-LgR&Z^dAmvlaDnu+))t1>r3@VIL3IWhE}G-~yk2RkC0!jf`F zNi4t5I)e`_>qcEt`+_Km2Y>RHMHaMy;96Vtp3O@#zZ38VC|5IG0Yxgr1pMM{4IWUm z0=*OX%dnPu=d;)-4Nb8&9B-S7K4P0)j?17tK0NR~+;d2)NiuoejbO!*ENWuScftKatR)nTk#R|icQzgb5t(p>VQ=uhpl=w~I6Zx|=$+NByD{c2Fcje1#Z?+l==E z{yzNH71O|^xTN3f>xL)%nj@Q+-f(?%V!-m$u<&&h^CK9Ru4pz5vE5`9Wqjm6yB$kH zaNZ~u@W@jCA6h$s$(L8g%Rmj$9z1ypP>Yp=(35UF2|@m%d9=JZ5kinM4E$_gU}@xc zA^USGsW!0=6$h+C%h*Q_)YP|_Mv4Rcx&>OxmF~t=fM_opx}PTp|3iQ{UxWuz6);{Z zfVa(BIFV(b`s{w#L5cE5hMHw3LRk47Wk>uU28K?S!pf030->SBRR8R*r2?ahpSt$8 zGy?JC!p(immh-J{fhwXiEdn8o2OAD`1AfXVV&To(hUU_Pzdx}6T@=Ms;LPTw%j=J{ zYZd!UB*d}o_Pc~Cz{ZaN!PgU{Y~ZL#wp+xe#_LzOdE;V#JtublkZWb<^d5|2P{n;< zRT9N4f#inaz9&0op9VD+a!$VFz4H~!}y?H?VR)B3H59C;?XWFZQDpXlwA?I~65nKq9(QjbY6~Kc6j9(D@`pc)|&+N63IZYpP;IF?WDVN##&fI$%3Q8IyAfw zwT;}F?V8-Yy5=B&E~U)$dnq-cv-~j^X#(h#%N`G`Px(V)r)*59#9v8KdZ-qA|HFmHBke z4L#lKCP0_1UlD#@el2gbZtI7R;I%uR-(+mvyNM?%((c2+H`w^gtNmVE1OSUup{--$ zVgIg_Y!GO>YR`ynOJMqFn(2HZvGCS2rf=%a2jOQO*4`FFA3vVxx@cGTA^oq(oCtV{ zCwQo5R;-yO*DzdwH|-M>*M97<`rWsT#-!P`S|Te}bls4o@qcF}MnxHyXzz*DCTsi` z*6AO@aONB_vn_V|JyYO+ioe#$r|@9VZm$2A5zs)uypu7d8rho7=zxwdVYyGq)d=Mv z!xLbgKNYkgQ0xI-M8VzqwZb1;Dr95cgw3DIM!jm_W3Cv{Nr9dDw0srR;l(nf2@YOp zTViWIl^&qPoCVtX~{d| z*WwP7f8PZ8f*kDw;syyeuGcfjTdu{RBkGZj`!8cP_mzg(;n zT#h{Sr4=Ff&NeK`Dc_kQ$`}1w6;V;tyr-1eX=sfQeQC<2n;*iC+Q2p8-~Ut}pQ~ZjsVnOoW|+7D-%MSe5PvL! zS1L8GAK)?rDfZ2 z>7MwuWw}+BfwbqZ@&SAV0u)wU`FScOR7xO>{5!FEDj%iSoF_1*aXaK)lUy%C=Btj- z``8CuiV~l8n)mAzyiUNRr~o_%0rG($QZc6x2%f@pPfP6!TV|^)HqrOg`41gtyxJ6s zdgUu8uJGY_6s`fR7VchqV!>`nBZ`@fXEWJP zAbi6e;A$4`K=^%$lCb?u%CS2K9Ra*@a}NC#F*lIpDZqQ;9F=O5E#nR5tmCTlctXdw z@1tF+XSGCc1d7Fie5EiCuuR~=ax5%}7#V{^PzH(mg!g$v%ytSP?;J=i@6I!~QC8v| zBZBA8L-dXSP695rvaEU*zvK07+54N_Z4KQLJP+6hRlv_88S6Rtt;$srEa;p7U@Q00 zUTkU$2*-wA_jN=i$}ZRV8f_qBm!KyqdLi#zaEqG4~Yq? zj(tf{p_7t5x)y_l(!K4c2oo#4?r1x(Bk1WHb!Yka^Y-*G+bVXoMKS?L%TSHmcd(zN zIYg{Ej7UFPzstGXpo;-xe1;d&PTEV!pEW}jr6|&%UmRalB$Y0YDy?$QYk|l3^rQui zTU04BX6u}U_kDMBhgNX{xZ8j7&VLY^vX3Uf@1F-z;3IIi0@9OS)yKUXA^-S!CQLa?BY-0jU~k5-#%OTd7hNx) zt{l_bQtn)ny87PMQuc}P6jp6U7ibs;<)910+yz^6;4MQ{^vK%^t$+;0anXBR-1f_;VV==37O~u_E@wU>QlNG+EH=xS#6?M9+ZzAeHx_9R8SBXGZb<;`o zhE*#iWMS>?s~PLRDO8iVED!i|L!k`{>Z0>>v4Zi{7(6%EP<6#zXqX>#idmXtJiK?I zl5kNwH`7i<{Ec300u&Fi;md1mB+|WYg8xJu9R4OuR0A}yv;t|Nrc#t#rTeAM0_aC-z^9{}P# z0PpWqGNxNVA-ul(uT;DEe`moRwpBL3X)L3(Iwd?sZh3RSe+N4*Z=OdhI_RmgI#?xN zr@%kjmB&o^L2nNU4^n2R%YiU};p*!9+MTgdTCtO12ZbD5ISNoP5%{@B9s+a=V1^QZ z4J+CFft>Y9t+xoyLoCYsO}<6B@a4uv$kD}fD(RWvCu}SITMp3^z&@e9TM@xc09}h~ zH9%hFFJJG5fzk3K%i{5X6s+5h#bcq>&n0?lus{k}9(L>o>{OS@-_M)ZpzwOwak4_Q zW2#Hv;pk<4cR42J7F`{IY({3Nv4RJ_0PGgus(qNCYJ*|g;kMN%6xcXd2=;p`t<}O- zrpwhL&?-A@+XaDIc`JYbFTUrv*RvV&7eD(V4y8Ih>C|~pE_hl!uxZ4OFDF~&-v;v} zcs@dG`+20t5O!B8Og3#OI0y0?#{nckD6ps&FWC%KTvFn$4m#Q@pJ8OF6`2--=sueR??Tm@;CifCi3&YC6V6VI!7-!Z7>SBDR=6hnPB&V073*X zaQIMFq&$R6!`sUtYb9{*h*~f3`}ILJTeSERkWN6CuxD=WYJBtL1I-0Fts0$c5B1TR z>UBym8D6cwNBU3SUk{kQ*=xV4p!^^7n6c)>Iz1Nl`*|P88r{}qMDQ`-31d)(Y5%$pd{bl9T3=B z3E5-1f1bzNqYWfE6zBs5`P?v*%P%8Z_UKs;v-F}?pva8FELtCGG-x9S<`XIcA{C9r z<4uEa=x=p4!0t)K`oG-+R$zFJV2{I*QHQkBt( zk^*djd%M8KI6kwp)PF;>24}1Q41jq8T3SJ!(HSrL;W-mEf{Yc{^ore9Y@G*9Y}zy& zlYg+Y`RA}o?vZv2_smyhCGU2ScZVbFKLQRrJ%@DV+BEsyW(X`AABawBKJ-`TucDr? zkyFFd4Oh<^94sEEaJ5{R_for1=FEbp(#(!Ne!E5HVX`8q(L*I=G|An6Y0#18Y zZNth+rOVLheY#2)%XNOGttEQq?{~~DtHILK1vH>B%V5*jXOS`-%ay?D*`cu3&9}FY zwyGWg^H0svA@Z@e{tNc2(#!b9wk&Z1>Kp-E61Xzh4N~B{! zp&(J&P7ov*=Bx16j;hFWZqbu09Srk%&QAEP( zk3SMjL#{8&<|4&hF?%m1rswYKU^VqLk4Gfb* z6(VQTMA6n4JD+gQJ(Va$>geS6LaY-j%-B^kp&Xk3-f2HEk)Pk>$oTQA&|HB9u6~Qk z1G(0iGT-{TC$|ynMYGak&3U)!ve-XObmi%iey__ zP8c44bn!)6$%o)G^iYx>f#WQ-= zpR*3(CD9l~FvwA);DR<93nuA0ZF*+7SN|S1slE`+=aO88kk$La zo*Z5J(=N-Jwu_5549ohhIjK0uXyl{@)W=B;(_g3wfTu-)I6|1@D{>$bu5$e~Zq zHd7cJD~6-;rh?(ZllMbf$Ql$sa-9shh7vsMTRX#p6H=c!3_sSY*gkT+zz22K3rJ2= zDa6o@BuoraXF1|4X6YxV;B!}NB4p5$l7wb!zM!On75nNLVB7(}&=@@Co`EAPft%{B z3)?2+!ZhfDLmB=t?NsgS3huGiX3vAivhz2F_L*Lk{^kBEPxs}}=5c&_wK}f`1YGa? zx|&i;XkxDv#bcf))Fi<6>X^$+tQ(#RHYSD}4qrr*yYu!y-qs2e==13dFzN84C~$29 zI(dtDd7M^EXlWJ|5uB%fibJydtWa%^wEzIr!w@lr-X<-g>|DX&0vF$k0-#0vK^lc@ zUcv{Rw7 MpU}Qe9|!pSAJtj5%m4rY literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/html/images/cover.jpg b/src/SDL2/external/tiff-4.0.3/html/images/cover.jpg new file mode 100644 index 0000000000000000000000000000000000000000..8698cfb064736d498501de801fcd727b8952bd3c GIT binary patch literal 20189 zcmbq)c{p3&|EE?}Rq?T}r5kFmU9F#1?IpD@L8@wrG?t>Gf-b~POGT}z5=%)_`yM4h zOHo_wOQNWtlGc(EF~0MgXJ(%HYo3{NpYz9k?z!)KU-z8*US99_Ii5ORV)@6?)WVeI z)F~F0Qzr+@@hpq+$=Uy3`;U?tFjtMMMC-2Gj zU$R;LM>}{mhr)SkaCK6mwYO_!kE2=$u!gU2s8&I<{Ph>A(e$X=I|*U;3`*14%`e8EgJm zZbub-@Ob3B&@~N`H0?jo{yVb&J76#VpOF1eVE+r(49f-9Qzw(h%FANJa?E0MaQ*$W z^Kxd_cmVYd!JtT<0fj5Bxb?-Nkd zkK?L&zq0qkxrxDdRD`?42yUb;G86`MG}Ej;GcPvLG=IfeDOXjw6yBcchH1E*SM&4) zqNmypuZI`8ki1UoSFjv~AH6d2t%^Mj2U0t?IIFDQ&zO;XCKY$FtTL&STv{DfFjuIC zPFRPsKh(+UuZps!`N#UhHXZ0k>Dn8!7D}6c+}!q8MPu~XNyjWgv|X{VswKKjqdkIf zf01N;(N=}V?2fC234(4cWR=w=S z)|~4F{-~ODK|!z7Ff9M7x*ERuOMh7^a?-}~L)+FI-Q-J`sIu;wp2bp;V1|h15j5so zY^_;04>!Y_zDP4RrZSU+pT|hUZeQfFrMr?BH>VVLsyyuPbu`fg8{U_$%QCJMT>+xF z-=wp>i01xv_{GS-zHST~7!y5m%(8@xVWUUWK%np89v1B;hlb3N(-&1p87buCp<@<; z6i?V7;852hZ2pn4^a`dawVjA{` z1e zfp{6i=is-fO$nMk^qWypicciPX^YA4YO)ALqAkF-4E;i3!qbZdtw7Z`WzVYuvSwiE z(efL&#xoax4;a%=(ToXCw+TF4;3B?B6hZ2O#_&HB=FRWrV}U1&j(djgw6?i$+1lQ+ z)n)q;Hmp)8G`xJ649Cn5JI8_zog5(P+zwT8dKpp9@d=v86 ziZih_wZ&0>EJs6{+fgN~K#HHb=bhB+rN-E1dpq%Yr29dQI^J>bjTfSCD7f3nCH|@A zWv4KTsg0oYX1TCf0Y;a~7e`bB@VN*-m=wuNs=`=!X-#0Eb^il|_fCnRYAL zc`2S7v3#x8ZtJsQqahJC-zrT6?wQ+~2(bL`-I0E;@w@p~MSwvztT!64`#})OGM)A8 z-;MO8)9hH;jNUhe#YQ?h)um*~xY9gGQit zR8GN`tw*-R`;2%Qwlwz7hSK9H3mkzO)|ww1I?nx7HTUA5rsTn$C{WT1i?G94Vly~z z=*#TUBDI0RPXpQ`_qt&y2N#X?28*qpIbR4y*e+e~t)|GeH`dUQQi>$p*J0`pXTpWS zz{_c|M#n5(sWZ&J7~#pr8O&N7Bb01lZ;D(Ne?MMIl>XG}|JFSH?WfL6p}&@v`?jXy z-?~vQ)Q0pr>VgP7h@|xI^oCepV!KJD$mJx=d!+bm9Ij=w0TS%?^-Zk*tebR0Pq!w) zvgyv*IOl!Y1bx9*G$WRYlIN9(0a$Vwr!w+9QdeVRsV;TwI$>C~{QS7Yx@m#`cZ|(F zjHaVy$(x(@W`6>Gx+P`Ea79{O8q8kl+aJo`W0u4@+s|*|cx7~IkDtCG+SIn&`!OY~ zk_cf(bd6UgRIFQOhD-R)UDPu|w@3SsrP$y>pT^;$u^}pnB`+or}^ ze(ahB0AZ*CKJX}gd1&mAxj=+~8#;^~>%Xf&8x%OL^~}e%!_t5jLQkI*M@jD&(DlfR z3CfIHUa&A7EIfFRc{zS-OF1m@qXvp&3RW8}Z++V$@W+e&Z^&PwzpC}sAO#ztP#i*{*R6#3i2MJhI_U8hKSqW)!NN9Udo@zpS?(EHv?7n)O+kD{M- z-S}pBKB~b=qbVZT3S!WMO;~DdC7x%xmP@Zx@0K#F6)J z&=n;^3cN#`eMAe?s!b$J&quo9ZxOMAY>8=Zf#n*J(wZu*RM5J3Hte|>=T680fDXiq zY!1AH%Y9Sh7Cx{F(XX;yR+jqQepY$~_RUEvwFcJTaDA1N`}g#NO5Nt^F^r|%oBJfA zDHTz$0u4lnt=;cQfqE+G5hSI?cefESTIvh8N-nDRaCud(NAJQ7yt|#4B9k#!=?Ztg$H>s12V!@? zVHt^rm!Q654owXnrzbRCz(J%89#_!U2Yv|uU-~9h5M)jW#4SA=tda)jJSyk!!Cj+8 zQ5LS#nvyj1I$~|cKZbR9_V*vN^jz(c;`voS_!K1QFIERME_Pp!F`%yIhDLH1`HhVa z`+abo^;`_l<$l|`xY?LO-M1o!Es7RKIE+s)pv#dB^_i14O*O9XM>Tl3VKMWYyWo=c z9QTHFF2TV1C8~+$w@+>XPM@Yc8}nmO@i4!g3|hqJUus|4*=U_FH+-kKg$O>P#$W5g zFUayzoz8v~7d*F`E9mYh=BS=HR-A~o>kvz757#%8qU^5d5UW&JwFl^spZjlvSIu@1 z-i{9e76C)X)=a{f1dUzKl@iEnquP=x^%*NoQuGU3XfHrjH8F#6^H3kXE z4UwMxM6$wSeB)%(Qx!x5#@MQ8_#SOI9vfa5b(cEoMvuX}Fe5dLriS;DX-ye8MYth7 zmWt}})FQ_41Q=c(Ylq<^Mgz;ncI4Vs!z+LQ!JZ!@U8ff)##T6#>BzSXEQR>p{i{!z zjZ)w*C8Lo}Cn^z53gU#3!hlLLf)h9i`XAC!e6LK)_g_2f8f{S*V-(Ur=2`fh8P68B zjQDNM#WQnruIu}{J_`j+yo;XVg<9g=vRybmy1@sdt_)t7=b|NbZHt2p5C(U0$6Nv< zpK8R2QGFY{Xxx81YiSWFjHq&dq8iv!h3IUT@tLVTrra=~FtAVD8C36j1$i2i6hXEc zG&;yqCn+u`>cn2`GyG?TZp7dG^i9Z{5KXns7%6_j&6rSQrK*erL}U)B<^~!`T2Mn= zRVljCUNOvOm;K=$Mq~V#rA+_YlA$Us=<*=!m?dFdaSX9m0FWD4!SBi~Q#+^LR=0`f z`AGQLX#@~m;Aex3ITP^@q6-6Pm|Yte2fR~(z%k1=j_le+g z_o$#f^w5(@j6Ki13J;rrOF>8-PxtT9wMjwouVGR6r-2>pDZk(z*eNNV;pM;j))-h@ zw-o0N=KQ`D4T^|I4^|AK!NRR+Ww_s9x0hB7G#zW1Z%k~kzCseaS>NG&q8Bez#|@Nw zT7gv+E-i=;ChfC6E6tv&7IE&GEK*=CAnSx`_1C$h^t*oi<&H|~@^z7a>#yII_$f&E z8DWX0=82aw%M<)G5#Z%#d#~pn=5{OEDgXJ`yob%-iflxBtYZ$s~Fa>Qs{Itqp;LEO2*fUs@nTjw~cJIVw8~cO^j} zhen)kT?Xx{3ly=2>XAOd{;v>llp=uDE2+ne>LC9hB-{WgndwPH7qkeJzC-)Zw^>@1 z>}a4Z!^?`#6cp}vU_@Fh=AT$}B3s?*_rZ59pN$3uqxlCUUWkV%O2l`ayKx8$UW_<% zq)LVCX&e>D`WqOMx0lMFso<^-_*|%4^v8*hYv^J5fo9xWqp{uUG8pbQeXbRhJOrxi z)51F!ov~#)y7GWo*y)X;%M7O(o`pI0wlYBV!uV}*nDFNq^$x03a+r}YLxNhK7*^id znSqzQG|_HB?d#R`OKs7;|2sBumc?a_wF>K3o(tLs;9TT47RCjcNs*=>{ zbIkJ0Q;fQRqOp?>7*h0>pfZ2mDEMvq)##-y_J1=7G4i<4oci2B`LP4=C3dK^<;T+ z_Js_k0kt`;(6pftz&Yeq-k04=HE)I8;yKzMA(aa%>^_ieRn(<=7_wajw+PeDl3sQ0 zlAtW=f@|K&bh(?SVdosLho&uWwz=+gx*r07crwK#q~i{BB++9 zD=1Nl)5s5MMgsK$;!(UYq71<3ZZw1dCP^h0@zZ4S!+fs50Nv8pbcmg9Z1RqOBM>4? zwdRVaxXuMxDKw^)n7)YA{o>Z^qB#(4G1|SV8cT+%Z0_wn`8_+e-Z?$v+f+iiw;iQG z^V`D+Z6CS-9yKXEO^P-^&$xTRf9CLL-)S zt233MJlY_#V;dP=NpH9;G_%4soUi3 zcnwf;%-K&gMNhdgxKBtqrK&QZYRSN9j1UYSaR>gyU8WXQp{*-6S|9TMbz9AeSq4zc z>ew)4onXyF@N18lh$YlmNkZL%T9@zi*(hht@~#4o^b@zM0iSCqF8JaA0eR6qN$^^E zO`>CY;xI{jwhkVyUQS{irsbv`Mo(-(wo9f)no9sySZA-Ud$=|ABV^gvr0*}+g)DWX zVZ4N-JkBFwi2kI3bC@l$B)!|Qx4&9pq*7imc+jM`zWgSv6W=zk-4!F-Kk`52Ope4KY1oRIgMR-MBWa-AeI*i6bi5MR3ANXY&?C!AWTOUVx?_d!N z`{Ln2WB$|tq*f~U_hgCPha6mq&M}J{?D10g4c6Ly5|i80U$v&^hiRtC zaJGT?tf>?r=db`o%&E3j@Pj+7+!`E4-?@o-gwYhA_17#f>Q>1A>#5LLe9ZE2IL(uf zCiOy56Tro=YG;;*JD|xn;x0a?Nt>_yl5kni1x744O~2@y?IjsCytn5e zAImun8?eSTpUhVT;Ykg6&wf7Oo>}zSOz6Wb=kJ;rLj{G2e1}gRE#_XGQJk~J%Bexn zK+JAPgn-i`3;Yf}g1pV`LBZ+1G;JEyRN;U%TZG1z_FdD8Xw>FA(Rs3oN>|#vLdv6) zcF&H6Lt`ZV%T4nIT zmBzy6<%bV#qSXnu>rB~N4^F3-cGN0Rmrq3neXK_}j6bUW zh&g6aIzn|?=z8+daL`opWjO_d1W(Kxt6T^wmjg00Ds7SE||hAU3u+h=gbiZNCM z&x^hj6#J6bG&BAsImI@e9^adRSIVv+RM?P{ML-m3SA-%LenXW0sUA z&x_*?8Ht^>HTCpD>iELE`}{gnjf#qIP&fkh#E8%w&TnWQQS%AT2R*rFS@*_=vb~p% zS=5wdHte)x`<%Bxhd1HTt*!KgLm&jjrh=1X@X>Q=fS%U*XLJ$kW1{ zxUlRZ+HQW7H5YE|{d7;In{lvF?W)B;))GHrLk~K;QAvwz4YnZ=Z%Eb8r;CV>)enh5 z(ru%U{F*1Wk~hR0PMh$GUiodF;*nw7@NDRdq5wtBpaa$0*_g0dh-EIs@;spXEdd0; zD7HuNAeyiZZITdWrF7+(g>3qwwKv}D!!4;)%?`ClrEnA*n%3s(S4-9GnT52jFiS8S zGX~76iZqMPsqIop+b&NT>I<4WzQEL?H@N$L@Y`=y`u(8?QwMK7`S7vhX~*B|s@(Ey*@}(ekI941o%|&mL2~N0Fj*TB$+Q5)!;*C*d=&GqtyI1B z*2xf#%P*2u>mJzu3$F=x2bU*iI_D@}w{Oj4UifxR&PZE=KV5yhfR{ebo^GJ9qq5h1 zl+a0fy$#*mHJTA#0`;_YnDxvICy3)g7aCM98l~5Z?3lY*6to(5W#ZnXBrHyH7{($%8sGuM}C0<9o~{!QP#ClRglD}_mg z?-^c4@$DXmoc={>$l1MbbWNH)Il6HCwQ@oQU7HLods*tA#1dJejXN(XS=&idZ~yRV z5GqTE<#B80Q%$`kkBHr1-BUUtzYxbPUD`}h*h?p>c6`Zb3>#d9rd;^Wwew}W*;1v3 zIMm2VePCs=E1aYQw?J>`CQ90ARaH=s92JzOjoHx`kVFtoI$DzAQEc#-g zruM7aoQ!T6rw(aONH;wwXQFqcI1OR%REv}>SofkhRsuKp(e~40s9Kw<^4Jj_gIT zmqOpJ7Ea`JVn|SeH7-mMi ziW(S8pcD&CoNRaEhuK!ZKm<3ZLy*9R=Rb55Nr|URSU2!>$<(?k%=eEIt^5Vt(F;?S zQw>YsaQP0+>d)A{+lRNDo)q(&8e;7pts)HzJ$yqS)H6XRp#el!Ja78mbmBB5rOG&3T`CekRP})c{zJad zmpCEOB;9j(*8uF*oWY*d>x2;I0B!tJ^|BHmoDddS^%ZV)5-Hc6tVc{2RjPM^hsxgD zDKIA$cbd6)r-l~yX_4}@FOH#l2{~#l?mkKa<{z{0`>O)0uL6+Wv$n*rHH8ZtAJ+GK zM~$#J1Lk0-WXw$_QFfUJv6H6Wy?7cfr&S(BUF(i`I@m7OnWl*n`AMWg4lu|9<*d6S z%g7-Q-61M06RPInbcnYyL@5$kt%$ouD;cDq)bLIOh__nbkF+s;VpxP=dd`qTYa7_4 zgG=~zu~p)_-J~sK*7ec$)oiy_1+adFis7XA=Xj{y*a7}T!!4l~IgP+vYLld(o|LVt zpO0CDx33__@arMrnnf>{3oXAFH!$(z+fI7X!fwreudIA3<`ex|;*MGT=B=*{cte@a zAyOk(pXtOBqy*?#PG`~AA*NtbIylG2-NNaFbC{s~P4!XeyD@M>4I>{O`bg;$_6Axw z>3yC}wp?#u?7%UL`JzDk!vjO=6Qk$M)P;+rKY?dx;>o{pvNU_PL`+)GnofX&Y5>}u zhwEYX-{5A^<@IBhrd3gd*kkPO!E20|ZCQCx|8Ppq0RV3_(@y7Hc7E1wA6g2_WLl{R z!tR2GNm4>T@phw|n;KO|V#`irfyEb^ZmdUe`9+megbvb*3M)hc!;UQ3I%lR???3WvoY(;;ZoL*6EHS0G>Dc!|ltG`?_ zN3E&=4^P&|doWY^sKjWg1a-b$k6PZ{+DS0tgYzHd;`pZ+cRQ)OsX3C5#EjAyUgUwo z$DsmR%U^0n8R4XPAt7hsoXpR!%>0deF2WsYC_)|x4+OBe(+9f$z~WWlA=O~dE7ZCT zVM(#c-WPcax5%#bZDUZSy|k*CfB86XZa*p;WBgqLZkSoThZ!#a93xLk!F;+sPxT3> z5PnQatl}<)2y-uA-Q9c-JLgrNN*M17RoN2hEikNe+xhhSO}0)iBoAt|J;Zk4PV=-~ z9zNr9(=Zb0BO#X$vwpKS7t}RDZRQwY&wbdUB=10LiPsmjqz`YoiAZS4vKjfmL3|L$`C#Ks|;ML=7oPy0bk!7t@px7O7z%W!Xx-W2g>dr{A`U zHZr9JB@~B`zb9tSy0s$7qq77_>F@6v^KD-o+7h9UT-)-8<3Lm!tN@JPik`9*JELto zf(a^aXh3y)Dm2%QG5mZ!dPLgeaw=VB)(=vJsB(}2^WD>$oC<9z#%h`!aaqG&%b7nx zwPm?$0McTHp;i;I1UI7TaemE;IT4j_9dUbdXOVAx3#yDFNj2nK9b&EnDO~7z@Fep4 z&`cqkhz|7<%8q4L0OA>jw5m9ogx}}zPYk0xAN!sG*>5+dvhn?qdptKvfNY5bpXoim zjJ^2t;S|%V0M+4v$HYR@)f$&rKezKG#n-zvOW!zC$~XNE9sLbOU*4f&)AetadTQm+PRE}4 z*@~&R9f)G@M)A|*<~H&SOTrBbi<(GE+^7kF#?{ia$)q%=N$|{(xEhV31 zk7=t>1wM(`-J`81x|z8ktW-dAa>@ZnDM&BlgTUU=9ahX2Zr>8)%FJsM(iUCOrs<1Kg z*~sqjO6o5k&%ZgM&O@K3+&iyU5nz4iCh^op?;JOsYW*5dV(p%0aLiDlnY~~?ddrWg zb0l{|lHWJxB3&<=wwMHyJUiU{#HENY@)!H50)Tc;a1*yfRbrRVUxWhN=BKxEBvsfW z#oy>uyi=83hwplSd8h2rg`b8R)U~ebf#IM;PebbJ>vz=_p={M|51+~=1}d*MHOH6M z){K;=*tQo~Vl*2@M$sMq4_>VYd(5h4;!n z#uK^_PJ(tbm9kL*Gs4#~Tqd!y$s1Np(YMz=yBSttAx~xFpg~wnkfwF02aUU?%dkdNhVKVSPU zGbY`LOPpI&E{=j!yw^3Dvl|Ez7EYKt7kwtUxqVorWcil@q3BY9nwzK6nrnv~-55W9 zLxjTnO>MIdL9H89lNe)7tN1|^VGMm#ZvXTJKJd8Q<+4L6)yku2t`@I3qJQC%>mEr+Yjga#NIe!Wd zLt?w+jQlt=5??dij@~h4V4$VN?u`!R1+pFw2PCDKajPMD(xTNWh=Za;G52J!PA<21Ez~Ed4rt$AZ&{PPEeEzoc6uF!9G%zW< zqqYw5!x%kqRQ1l{p~|+3H{#do!yJ5`M)3OBy7i}di_i;Flfykw>bf-I$*OD2=X#YRbM`a&T+{`Ox7n!-CTyMv=pgTtjX4CJdz^Eyw z$-O5;RiMe=+`~I?CF*{1dnmaO*a!Lq>ateb>%%wY^?XBd?-WMdsjE-f^xm3D?-1@% z5&G$N8suVek=S%pRk4ob7e%*$?@yq$o+L4ce5S)yN~PEz7RmcCjPargypCVxAJoAk z&N&X%xI7x39x7ch(##fvG4yL3mt{p9iZ0v8^IRx7M|yLW-oz2o8;P&M2X`ip6^R@6 z525O2;TqD2a!2s=2Od)VGbe%WknXaV2lbC{Y<34ul1k zIu|JbH!6K!CxJe_-8OUB{pmR#`Hc_CGNkyFeX1rXUl6Kkhp%EoAr0bS~C)AdT+;}Ql)a0?AURmjz zoS&iRLP>@Q0{!5Gr|cM6=uFr$0PUnk4MZPEUZJvO$Zuqlrh zMEj^sJzZZhzH#QRt4#yWii$w*s|$t^l{Euk@|A`qX3s zqYf|HD`q@;VD7mv17jpP!Nl&swm$Otub2d{&ioE$F)cEY(oVw%YHT^%eqXxs&Ey6I z2rkQH&YgbfEu=&!13G!%OlnDz$#t=4@KKni#|-_``1D1WUVJi0KInQMZ+awS;`L?L zZ->@RMab$dtuM5?N*}!{8cGOeOIC<|bf2C;p$=WO3B@l*v`4HBH~q3hAc z+{W6WR1|=gkg%(Aj>1%DYxhG3)QG2u=R;L`tko-L8T5xodwr+yh8r1%Uh?^hmO#j1C;c7m8Q?@UvTgH!?UIa{tD?azQh8 z1jf)(P}cXDW#|#$oS)}Eu%=wt7=E;CG=uLR64-kaAh4nl;M+N+SviyjqxNcA@`w9Z z9!6LeNfxZx2zqh;d5j&zT>e!b&1%;Mv{PYALAQRr79=|6?s+TZDYf4_z27zHg4m-7 z?bD-CdU}PoUCN_%*Y9>#Nqy==7#a*o zeQ~=`QzpJE)WhXw+A0;5{7A7Os;{NVP@x<;MOhlMk|z<8ztDAU+GFuUhN|Yg(8~{!(Rj2q7s$s8{*zx zyO2>|i#RfS5tA3`t0(=9iW6FmG%%E3Im|=cFz(i;I{!5K-=*6jQf8 zb5bE1(b<&Ki{fxSN`*!2+0%hoaBEYtOcoxw|8%?8fgVdru`)7@miX#jHN5l{izbGN z$6lDGN1QMZaRUxdT7*KuPev6pW3@na+gm|FhiZ(dNqy^+tezMsWot{{qI9mS(u2#- zjCRcOe1+QPX$;nm+a6GAXty`6m@R8V2h2G94xqte2JTuL8zU&Ilvv8uC1Hj@#FEk0 zP0}m|(iO{pLLemIRH)eJhL`5(vsSb_M4Ti|231Nyiph>B3?(AM%PC1 za9fl0I7QJlb+J2of9nTSc6eUW+ionkm&DZ+0JtT)*P1tR2ycR`jQA;iZtj~CccleQ z8|1@jZ~MocThWR50e-i_SpQ-vpEH@vP}(GG)-n$HxATN-U)lqJ66lb4dPx%4VG!(_ zyU0n>nN>Pr>r_~gB%Q|yEx`~+8f+#j?i2k(mZO(QmxWi$4NBiRfn`09SZbc3B+2bZISoGA~i=8J^>Y@|0s14t-V36nHX5 zw!aM7KzFUB>w=kvm&x7E_*LLl|+ zg5B7xmBiy~vELd0$sn8xapqPmktJ=mth%P&sQ*(WIf#Vj2OqOEd>9Xzy8G4pQ?^cE zSPgHuk5hOEqdCH6yps6w4bN~TO?#xIH|V^oKJYV>I|Lgispv$OSY%ZxT`&Wwl0clz zvWcqcX>e|jydjtM)qDNxz7UEI1CMmLJ`{rYy0KgA;kEK5W(>r>L>um&J&NJsfn_*0 ze=nO{o>-PT0~w3HU$dt}>V>Hk8t10Z2T)j^YO2+s|`Y z5N%F|p!!aJjAw3sCk&dD9Tk+JA59%4Ti@P3lpI}lK)F&6HiQ5HKI1DBVRB&|f%9Qs ziXt1J)*1#8ZfU$Fbt9TCxbUO(qqI(_3J1gY<& zyce48XWcxu(_yoHx1IXNHpS?|dR}8y>9o7_Q1bp0;k=Rs&juW_)^!Sg_3#N?FJG?Gake ze^maekei+}<)hF2Vays*2MmUrgD&^3!G2vPd-AN7Cy`RMObW>>KxO<7jqBDQT08|G z$R@46%~o7F zj^yeEeS<x2O&<)S^3+R5IMq zjGW0F&#T`x^sMb&b4*9li>v20W^z*53Zw)Xmq}mV*R{1w{?PW67{B(ZXYdgG<+YjA zp9~nQ$Iw@v>5e#?46iIYj>#h2gV zTFH8|0}zATdR9>gn#!x!GfIExSvHwa1;PdI2I1ilzt|7r`2+b?ZE0@1fv3%W1V4FFh}~g6i@px#OG_+sjn<=$GYoBW26NoWIdj+H!`a z9Ke28BYU@R`;;ZOkcjf&M2L1h(C{^rTDo?@?7B*)7urZ03)X-}9l(oV_T%?5G zgz)$coA(l9Gyh+>&dv=HvA<~WQbn7-$xZtTOt`$3=ZMB3y2L3nmeV>eN5i+p;Jw4z zFC~?-ttzPZhP7jEyCWK8aqWAOt zx-dB$<@oQmV&Dix*r}EyrI=6f4c}p+<{ze_S531%HX&dnfe5}I>`2-SFma5#C}Co0 zG4noqOGKunDaLFtxJB2b zrEaThnVqR8wb_|{<%^)%ujRm5N($F}edzq{rUzd`rANRr&-pGbsog-zs>y#qK2q?T z(JJ)sKU)roj1{mQK9AD3w3}aUYl-)`^E$H5ZLXG2ltKRR8|m-$kYRs#lO`ZsSCX0? zz|qLWn!0U3PIJ?#8*x7=U7VeAjovy<)p6hwaT5p zIoe|85bu=#tw}rLsa92KuQbxakKg9E`7sL?RI^1q;X`M(&FGb(q#(8~GAe1|DiN#i z;pKNN6Xwf#6o7YvnpuC>80MYxpr9VM5(7)dy>skx?iE2DFauU%Ye9bosAGF5P@J2$ z*@*;TK+NR{p;J}#96SF8zDto}t7CxrF~1C(S|MBf8ESx&Rp_;Y_~CqMe7(<=40OX$ zm7y|3H@>LNi@XKwYAwv(iOAFY8RE7MfkZqsorX3vvj*J2ub!%f+S|d5U-^Zn)?nA9 zg!C^iD=T0Kf}iTu7DUknD`Q>0qAQ|9Na$PVka$I$OCl*6Wgx*7>*J=HV|0zQrTnJF z`44~>rb2GG0O<=hHOrwo@$)2iP4umXQ3g(ONaF*vd%bqZD`_&7#H{L;Mg5C&Wkp$e zv6aUxR8OO+#-IdAoli$qI1zs^J06?dgmjZi)tJ{>_`Pa$j=p%PwP2w7*3C>`6>O+9 zs`##Eq*M*s)IPF27Fgca(Rvu(M{+_@ImtcS-I&nj`C4-nSG~2LDb?Y%!DeuP_G5@s z-r&H-)0iBEFQ(ZgpecMQrL|i9Rs}e(qkFyX4si_fwLE4Xev@8)2x9os0V;@2a8R;v z>;C6LQvoJ{+L@xyxrDKIq@8PeSNcT#0_wu4H{$Iv0pV}ZZwm3T`g$c+jM|9Oh&`Du5e$@zth>-TK{6w zZtUaxdawbCuWOa!SIrwe6fxKvrLcKrv&3L|T9`idj?_)UGP>(lxSzgCtvY!@QS+sn;`+T}q zDPH4yLZfz!BAfY@wii*oP?Z%VX=5I>8%dTY#(>=6^f_)hz318DJ%;8TB)?9 zF)m;x>@{ao9b#4C!~x43W%kyY&^mitjpBZ7!o8^(#x%|BEn*FrtS2;?5N}%Hv~S!F zywl!v5)oA0ZAz=h05)IMnp9%QW*0`?MDio{C`YgAW2dV?-*<--_Js`fRC#E^9|XeSDh%p(YUYO7fygu08|IzMNccCmiX$!JOxo9KBx_-@^T zNUv9UM*pXlm$3G;%7u4rq&V5Hqt6|3dh-!Q4e zmp&IsGj9ywagCzl6C%@4@f5HnxNKmy7e{9$KOw@UeWI2;qyUXHL_F62q?$Wq*<51- zbETiOOw$+A)zB7yXFgXa-IQ_-M>EN@60n`gPvBtyJn1SuVlvN{wv%SGu=n9|WF>Ec zq9ofC;XFiTG9QB*1-*OXu^vLkb zQF07FeR&yLp6G`nmlczs{HDe}m>C$*kvP_ayELjS`(pIs6Uv=*CGN4?7aJf%|HHOIX*+X-q=oM6N1Vo|+&liXU@(b$?ezy8==sqYzcanGossE#_i z7sN%siqD(;3=ybnrpc6(+FaWK)kn?Mc@cXHHPFg+t)YVl9+;k@Y|OgW)0M^qh)5#j zNp1bG>==lTDHu>BN%KR56>9f9?M%E}v;ft!$S36CN~$+r&8{QGEbmU{p?|yUkGKE> z+@2Kr4?a@dtlrGjsUL5!c#S)M)WL|N=_*`w>cbzi)Z_AlNEkjc&v{Dh`5kD~-S4|w zcFf+PMXL$T>yPwRMB6)SwdF5&G|)^Y-ZWAPY3P|0SGG4&-IAB0d1-L=p1(Ya1#F3= z@@^4^=A*G2UtlS`!?_Q29yvNH3SJPdttd$&;JGVLD4h+Yj_8BtNsc#;10O<^g+$8EDvDhJK~*bf~+%y_E=Qd~At)N4^ zDPt#julhaMg9+d_4uot zg_hz5P8#^`0;=tCvz>e2UgAolx`2?(I*|k2^u#}~1eo7E*Dv}}rjE~shA>H6cJV0t z^7@K7#?8X9kcF3804`RoQ~ zR>{YV?#fO4$Xrdc8jNaOO>1ccgVxHseuzF&buH5>y2_c340>hP(^G0gwQ(YoW_U^&Si%FJo5}(l(R?w*3uPA zpI;RVF-186K}vSNIAgEjv!CBbaw08eLc;3QldzIY^{-liy079Vi24?1kbf)$F{3jk z>{&;zLm;Y6zT9fHAs9ye0HzbR^qZnH9`$oYy?YdHeA0H>1Cxr(0h`3J2am!4tDu0}lW9NyK& zEJ^d)}h>x)`iit0E2MxHq-Qe2y2MIug;EV8dME6i_^g7;Mq(;*q_ze`dqPwo`xwt zH&4LT1?y<(`D)~b@9M8DKdY*^mZ<2=KK(lLj~g*Xgx@Z`%0J)>1N)d60PHZX@m6ES zF=xw|T*wJH;lz6sFopyF*6CWOJ`K!%H>C?MyYqb0C$qO(A*F)+d+Tbl#kKI{>xf?4 zt7}=*vuzlL8I9|xFEvKd{pW#lMvziQ(kMvC`u+h!H>C$0Q3@6^f~HBgk1yxVExJut zXQlwFR&)7Wv&C1f)>>XOPqvC<=7~t!OlgWzx0{XOfX`9MlO=0^rL21oGfAr;-Jx-d z@GB49069tu|DyX#7swow?RM*73{5Q$ULN$5;Dc=qe7nO>oRBXZ_zzX{kq*rV^m z8Ru6Rsw7W!Ui)}8eH2f6uVZ-dv@fe-_tNkFZ1)yQpHzl@y0)+z+F3ripz=@Y_ETni(sZ2z#CK4CXI*%sR%=^pJG(7D;?ZMW zB1<7oi5gUmp72y zPkXA`+Xjl$Qnd>sLeobPGS7A7z_H5=vBMN|M;*%gQh1{O0L3@IYS#6i5^Hx>e`aWo zz2Y5DRn5E)6|SEwrLUJ3_BQ1b3n^eKi}Kn=sM0Ea#m1f^WAn^bGm0>r_$+>PhRLy2 zVV2UPR*gC|X{s2B)uoF4&$NS=y+(2N@ct@=qM7(k7sG0qUUS8qMTEg&pATjgvAMQ? zN^+$k{d$$#ne_1 zrlS^-rrm06MUIiGGJ7BG!SIjvbMYVS)$q&qmG}j(wx8omE3F5?A0Pe|U0>d{&xSlp zs_6FmjgN?Qi)~xU)n?FcbqKF)B)x`BS51cI=ElvhVwdd3@AGac`a@!{xu*(noeZwN zE>$sp-xZwKtt@6AF{wtJYGLyF^e9k_GWb@Cu9a6MP0lJVP?sW?=DsQTC5iEy3Bp`i z#vD_`Sk4yDIFhCjU~goR`+~&g-ZCAb88fcD^X_Mzyc$`VN`liycz<+}r3nD7jrPON(lv z+u9|}(@K&2o6Ks-Y>w`hmbR9Q4WvB0k|+ppdYq|Z*(?FvbKLWj-vg#95hx17XIx{R znEXGbeAg85Hb0AVj7E8x)S*tcD-N)$2ZV&_;c(bW9Jq`f7(x55lBDGcNqf$5la`Jw z{o{goMQlV$a%h{98pxvD}_oaf6a>nE(^i5wy<{hT2Q}$4Oy> z42Y%J$tTVF##5P9%(DD+s7{q!P2}iNlZ`gxcHDkC7OM87V?WM(9f&PgC>i$W}8iW|3SqPhSWJjZL91dDGHkuWAN zFM5>>WMVotvui+;Tw1^)fD|%Yi3OsIxFJSVOLn!nQqHXy0#qM$q}>w~d>h7wcS#}C)wR|pVgjFz^glH@reXTgUwQA1`MrwuU zN;8MQ%>C=#G7Dsvc~fvBc%lIWlNO365?ipH-_O_+_pE%hx_IO*zD4tLtDUW0>E0Ew z)4WTo-PpCI=i8;Uvs)GySF&3pn;~au47QLxy!Q(gwd~Sw8gX|^i0)W>{x z?WKY|hSJ6zun#KP9JbxYAk(%(T+4~%CPB_zOP=E}mE(fIPAY_=`KraH)wxxaQqjA= zwd$FCN5{X~FEPrnzgeU8I=;ejJ_T|P?ii|3|B-&9)I6J1Uo9+2kYBcLctZPBaRcXqc+^5X_=XUni z``e>$TipB4M)5y{{8MBj(y#1}pw<%D+(~r*0A|*siEZRaU|1z%E$n7O8bq~q0h#Wm zNts)JbKwmh#xE6ke@yWd_Umn{YWfAV@ZU08t)7!EqhSTj^s>oyVIsg$yxFFEjVgP1 zB9V0It}dokPtB-hc;ymC#Tf`?WjJ8NkVn3Ij+}P_y-UOY02I7YrQTW1c|Z2uy{iR| z9Zp$ZR8qS?b9SziMC%^)i+7s{ByWO10Uh{k%B(13FcmQsaQIwpdYF%EMoD5Ybt=We zrAiJ_lC)vW>C@%qQ?qH>$CrtroW}(mvjdH5Do~s;ICm*fsa}hV=chbeBU*IhHKgjo zm$ju9#N z)cjHK=f~{V+GmMl(Cwx-x+b$_cj5?M<~U=r)%;YF>XK;RfWPol*?t%NM)600KWNW_ zdiRGfd^ho9LcGv?VWVh~!KLcjcZ~cSC57C#zA(@%-+Bu z>RP3|xAzlX-_81K{{RHu{{Vu^_+V+@@XCL-E$z|xGvmE7^Wo-|@ds9#Tcz+mmEsFK zodRti#h37_-%H^sbo=P+;@9m!)I2JI*{roKAuX*ef0+LO8fh1P8}Uzx{5x}TX>%@# z;vG{+x}QtFgHqDuxYM;OyIC5;P_vQkZ>-u#Slit~(%am|5_@T6f#Q+A$2QEe3S23d zWms%1^UO!p>r$h{`K3%h_SHO0Dq*EJiTb`0geudg1v*%Ga?@~CDmOVjAL4!xVtibW z74iOA$9yk=;Eab0kI9}vhvCe2VVZE?7I53AoGc}1VzX>rY;-fc9aT!MXNa8&QEw4W zl`0MrbB`@5fT{iC$@&qI`hO~drGA6!{xubTb?)oRoMU%n-!oe4uAO%B(Ef#O>3dy9 zD@AMCD_dRa`h^rxK!S=WpaPr-9;fvFMAK-dn@O!Tw&^{+MACbcEP->u=y8VbK^){9 zjN^}E&2{kj<5XQjEk^E1^$8%eHZVtZb1Ov^zm?@AQGx!dBp5ziK33un%nLC*RTZ`$ z6JH5dHSqOkN~~SfqbF~iUE}{@0>ri!>k?gEt3@P>G|qN3io!C{Zg}-CjCXUv za|MNp+8?s4R@X;tmkV<;GTq$De7MxJ5fQdPqsan5UP8dHhweP|=da2!_zYklaf(gH zk(19}di{NI+dV5RH06ZEVzF3xN}YUU-AqLJoA#4>H_ImD9Xdfpb>CB1xxy4F!lhV4 z4HXIs6(=8M6z|Ii87CFq+pQj&8~WdfwJm<|-s+bU+}sj`mU2)58mGvds$+K zW6w2)TywNzC)@m*j*4!iG@g%N_!@$`cTJ~ev~6hBn$h)4ytkzmG+p6i zEZ7f^n1V7sUNe!A(Cr*&ny%9B+(;z0&P!(-ah@^BIKuw`bQT{rav`FR%c5H^MY6wE zwR&Fm2k$iG+?vr!P0Ci;N13+yV!jyO(YxhJ=H;4mQ;zm=$y$wf+Bg0i{S~xP(Ist+MHF589=PYMxSqDd@ zX635PIvv!8m31^5Hjd|ezvut`|GDn#c6E25T7_Q*+z0Fc0KUGyPEJk;1OfyCojiGx z$zDOJc<&r0ccLMJ@kJuTiivYwKLiX=6LY941(1m` zS{SZUDlwhN&@S18g?M4|7o!~Q=V`kbN$`bC#1SYUGZzXve*po?OoiqAf#Cna&CLZx z)YjF4!Fix&5I8nf5 KHb-{Xw!lD1PLi&U2~N_kX|Z7dSY+5KnB+u6bQltbydX6R zLpWB8CN9D&;4Rn)3F!%mmH1LP3UxUZA}lKeK?YE*u*U9&iPS6I68+a6fKd?EH$5=` za1<%F9*4VMC4xcXa1*AQA`k^yA!Z`W!5Vwu7y0u#$MD7M`7C$SJ06kK>;ax?le6Tp zHrS%WyOb@!QT^~E5ytS!i*Eqzfk|Wx`aaIC`s-cF#&HOu#8OIdRrifEpcsIpTKT)U z1eo>CubB^%DYJNUy(7-0!4_rB&J)PKa3=$KYI)<@yZ9UR8a7wVPN2NvIus3q9X|jG za!jFNsFZ5h*J>D^GMb=nL;v}0?QnFsO<64?$#-V-T2!x}*y9Ope|UCpUa-J-k=um& zBBkqP&`rgk2yppk;8CV#-7v-UgoyNKmx}6qhICchrzcS%yrfQJPElyS-$-Yy0JWL?6{{!N12?((f0!-nx)3AMECgO<0U2SdIEwC2i3bCoOufm(A z^cq?7TJ9K)8n%ZPvh5Eliul@(G)+WW5F6@8^>s>nZcFrXkw}5bUwCa5W+)QHd>yUw zEiEiNROk}MUvNJR#<6BbyS7%Yb{4g#gbJ=y78m&pIO9CR@4X&mx4yInB~Ic_nY=T0 zQXwc=??aV-yfL2dIa4iTO__oeA}ZpQWA(&(jECBUBA%pBK?GR;dW;d)bN0$nyC34E znm{>)1T*4=wpLfObMaB^?(R};mhES|Cm3U3)E5BiU+TZ>fVdR|4ahXE2OOLV)kA_e z#ZG|!FSoIOyGg|@P0pvit(yYgdPST{>ud{v^bB}Qmx;)KVb|ov;;0kgr~~>RZ$$U$ z221R1zo^Yu&Cs-;2{JERTgE?opK#+PN(|~j_q9P3mKB7n(ZExd!px78Q){^A5Q9Vu z4a8(E2lB{^eX(sITP!O0`RvM0VJaa-^lmBe;AI1!+Y%)VM-}uz@lLf$gSuL|h9r{d zY2>F&K zu7S&Aa#alUO4_pT8&G&X13R?5da;QO8c5To9_R6q7@7O~${gYBK*(KPMicF)HpU#Zih)OV95ZxTau4(b${ zwqjfKKG8IW85LS+aUHJCI6#=8Od8E}w6mBmamic&frLaLglTi?#A1M6&!9`6yK{E) z!Qa|wfQ(s}PF~NVu>(sxN^S%6kSwaI<W-g2bT>--IjW}l-gOS7Ubc`vO#La*vl0Dh!|!&mU*Wj;72$rQ zx_ZuW?E{2fcqm!Z;|s*<67G=t;c z=T6hBS%>keIS%;F4JC(f;(F7qcgc=1?YhcmuSn&8@OHNGclJpcv4}QHvj(iS7!d7N zIQ5s`>2Xh*%Ij+6ySTIvJ+qfY#Ft?*h^u)5lZ8E5g)($cIH-hfCIIK1+XS2avX=aN z7bjD_fuKQ)Jj1FZE}z3WVWABxhVp9?aY&*HHps=qVgPEsMLckpasM_pM+A3&pdXs{ zc;dGZ1^yk54}T3MQHVLb!w%SaT`wX}KDU~cDG&2Tde4N&j!`0f!3$4)A?DYPY>j)| zdQDd}z_oue%yxWU>vlmWAnSPASd^-7m_kZq?(lCItx(q?!UxyCIRg|z~;R+G z_nYCSGBADq`^OrK)}Nd`Gj@U9#1bX#wL^`$II|%+muma@z541#^GzicwAV>!L;GQO zWPrv#wY$R2EkXrecAAAruL#WT%00hMj(^gsq@UPvny?-;6ENS3>pMgX0H3ey+zkeX zZgyIbib8T___aZ$4=(n*A(N0ba9-$f!tA-{({$wqWF0BOCtcb!P3=A-gC-Z=C--;G z*^a|$xrbf_-T$q0@_4V8Gr@!CfEU_n@1VS~`_}#QTfNl&X{{;vcfTw`)+!tMN4<1! z^?8h{dTSGf|7>y5g{RVttu56?-ddbcOkA~Xbd(?`vr(D98*f_A6g!<3dMJQ6u*PvbK30?t67N*JX z?Q^hDGS|MlsLcJ>)XUxxzu& zwn1H)ph`;tu4yU}zVqTKQ23W5H)nr^Ezj>%*F=b{c`|f^FWGV(9LLD~`)TaH9ra1N zs@p51B>`5hAqA&J zB)Nqbo9BomIQB1=eXi8cBI1Q5t$QghTmCLVK&LNnUDURKYEWw{OY8=<_5z{Ny8>m)uI+n7USBs$qi&{Yq(u4iRIB}Apmiq=p(OaZ< zi!SqF0W$l=Z11>EJi@BHN>77)fD+{WVLesRId`>9Bd!n7Ip;U>gYvRBKfzo(?6Y<} z;=qelyCaQK&NQ`DlYKLeUV}+au9Mof5)|D&Rqgdd<%)&bdjqF;2EC3ugrssU?l)f|NQa#|19QD9l1){<6+VX`biPYYl13aGdjLw2ndhojJEOIqBUr<~)q}Xq>!LYzE{xRBoB??IfK%*dV)ntm%)>c(+ocdkr#I*if$? zdfYffaqe^!(Oj<_8@O)!%-5PvK}1|Z*DOeQHcE4=qW%&|KaHRjdvJE~%4M;b0XFhO zstm2f+j>XM+xG~p$VmOmaYOtm*+iwVY^~^TQqDarEu!2)_LUY)Rs{ul0(1V$6?HzF zwLuBHD(t*5@AFd_2wW^K5JAH+Snqk6-ynw@?kBT~1L3CR2kFh{RurRz)?;@zYE0LA=l*zf48Y;c0zwH0ZuPx-zTX2b3 zB|tY>Ef+Fy@kJ+eL!@kEPwcjaKW{oYKBmy}E#Ws^*4f_8uonl~fmLu6b*?lok12)S zh5bwMayT}$+G}?AuGNEj^mM9o9YHo6ZJst3PU^*XT`|4K>FI5dp{`m){35}V@LwZT z^45lOduT&KDS4^b*u(f&9Bi}%7V@wXJh(Z^L%5o=}o*^7mAL&u8cYANJ^Vbc_B_97P)h8>C^?{#hl) z_lCyYL|G-N53o7+=FB}stw$G?@puCcp|lrZeJ+s%P?o%+dmIl`z1|aY+4xj7C-)4E zxM2@zZ&JcHg}7=(4G}0$>5Yemk1H+~6bqFfuj~tM!Ft@I4~DB>8Ih@3l)dMh65Vq0 z=UgXGbfuOJp+Z2q#<3)U0{pD;t9!Xt-n_`DT$!Sb#x8vOGT% z6A(vvq);c3iEZv-r6wYas^R%r$dK#J)xJlyf8RO09W8qzKBE`<)a8Qfk{sXn4)i;= zKGQ#$EDz=;>=6&kBBrq5@rqhH^{FH0AK>}3$Be>*M}tSCzbF_S62uk-|tvLWkyMb->R zbcLX1Q>=td9o!kB=8vd+)eElH5$zwR(cUO?sp&fQT zuX})fyqDF{Sb{%We$ye)3?~GyXow7ZpwE{=jwX^_f1@K<5rf2+*%%!hC3iW*L> zjUZRgwx}tE=yiMM_g{}lSs1@3ls|i$kedRf@3S8>qU4TiR5KZhD?Ty8al>-R>^C%( zw>QFXwt6`MQ#@_8(w49IEEeN@VW7V7RiM9jv<;o>$Rw&{5S%=>YKy~<*PWR0dXyEr!0yL z;UdLU9Jvh_+XurW)I{o}>k2t{J}dvEd0}glRGlsQ-w0$DW`^esH=BzPno1Q<=jV)# z?LJsqiQtNj{uZVs#Q-O-3OWBln5l2rcJWCel+U4NkQ1O`;z4MPSKYVPN12YmL@(4^ z$scgyQ7XJy)tFfn-$9dn2{d&!)9!s!0DY{t(0gR*P29m6B#98A>aQBLXRJ7E1qydO z;Y`l}6o-#v<)JP{{Ns{W7LUH~+z@}@J{_MGfvP53_PPLk>J ztCi<#T0yefx}Pm}7G%vApD3A<^oZ`~YearimJ{z_H(H!;uQOIx4vHgrPV6>|(7 z9~tEMGvR&X3nfRLm^jQ99dDWJ0>rp|ShZ=p@mejS%4gxon1x|o64GBwdK>f<=&NcC zD0+#}@OYwvFU6jch3?z2TWp#;wgYT0QHSRE?};}8Ca^7uYkNGJ^v5&zKMj%`mAEI_ zB+pcO7zgdhfp^=2;+trSiDzt9wY$n_)viT99oORZUgz7tn=9&wCOXXJs%cQX2mnHF zO`4-d#w|?;eu@Tc1Q?Wfro6v0VIejt31+)Oc|8`cX;E2zlcAXs?Qd-Dt2@G&vN6=60G^($y7AK__di5>*a-*EH23HJ{4YekF=2i@R^M>Y z_3w?`TtjpR8*J&2=odJD@uy$NLE~7$Uzznr=}St^w+(Stq=h86aReodc;K;FQUm)` z>jTv}t7aeu^~CE!zvlUjgT`MlM;+Au0wpr5&;$713%*AJgMU2dfMIu7Og6s~|!|I>lK7S0% zFkc5@SL-)Rf62+-i5*|%KshYm*8$ZU>U+lejFc~!RXkn@w7&wtiX1j0ADnT);@q@} zrsTlEC~_wo(u<2&c!ISSn=N`qTkwwN}y@~ppnOje}KSaX~cZj zD8G>?i@Jjwy%>rCwa~tYLRSS9aL1hSNK{_tm~h{O60+)tHr%E)2a?Y^N5(--!7xy^ zt}F>kj3c0lVnrNm@FH-xxOD}3GT8w_=dX!|@W?ZjRo^tmDnQ?k z4YKGF3th#;0xG$swVHF@xWbGMeh&mDY)4I^$CEAra1i!S;~X{*0`y zb7u)`tcvtE6w>q?;c_laDrStf)ylRY!6YZQ)`6u#RS!yu(|6bN^Pozt$e&JxgWSPX z&?J28E#O&y*puIgIWt`eDJBh1W|utHVI5b{Y!mgP^CQjika{7L%LT@urqX%_dO_zB zqyL*vU62lMTjY>1yeax}pN16QbDVl_yxcn<9SU!(lk5QY+AjL*Cq%juGkU)2QygyTE_ zz{o_49Tz}*TNz26kTz1|jTvUyM}EfhYH7`qWeK0Hgu~4`RF2 z$Ngx4E?itVHg7*WK`V3M+GLd(eqgfgJu7@C@|;7+{Q~*lO6!(E1whdZLyZ+%V`e7J zy#k<~=yD<6CH?cK(8Zq*I_$-S{55Z)?9~Gi+;_vzrPp)@xiPniuI8a@+Y;cJf>l}f zp&QK|dVZaGL<1;Lq9^H zYXavGgJDS!4$jRih68~G9WI18Hs)Uj;370-%09Nq*{yPzG8ufo{))WCs_sq}5i)g- zRP%ZY_j^Xa592%K@-Fs$N27rJJd8AB`syP7Bw(-8jdZADfqFXIJoVw&sasFyh+CrX ze_XHoPp^p7SmC3)e&D3F_*f(d^scqkcl=jBkyc}JMU3%?2G-7xb@?CLwh*+n12Fn zX3AbUWoN1!a@445b2-tm+NM0`qO{ajv*Ht|fb^MAIQ%1Xll8r{gMT0IH06T2#D!^Y zGVyavndow1w$~<+KSFgd7i=lu_rQF&DX{L|x4X2dBNvqqQ14i19G9F}7M)GbS;)nj z-i&RVI@fidwuTGjr*$3kq5&T{Lygf0?;HoOG+9z*eWr#AF#oSu=IwDR&)9@0d(G2( zXLjr6e!ouuyHEkhF=AAP(w-oX^DLzZ$DR`x5^ScNc3A^0kbnktNwI)^$qYqm1M*RG zQNcfxAw$0<_(cZXk6UxV=G8Hr+ZHV!OAweYag$D`yf`xxB`}=gC^c59C_@#7WLw6u z36WDJOLMm5pVH?~g4jwi3tq-)hKfehMU2lP0SUja#(Gu(j`wW{NC%X*rU9v!wnvUr zdvI18wT^F?!>Y7T-jV_J)~kCw0m7{*_sWMkwKIs@Pd;`@X6Z6^LCuZx@upz(jssSO z=1t1!%Tmv~s~_sS4>J1^eil9RAIfCJmjPn`ZFR>_ke!L1Glh_y9sScZZ>F^sBqa8a z>mLua{L%g<;V`{O9H*gg6N>SnSWW4JzqnKF95X_y=KMrv?QZFWqn?c}aEt2$nE~tG zK^r9hCtJh+)Mj4dh(&L1gb$n5Zs_V*H*37st{=Md73m;dD+3y^r0bco;Q9)GEX)Cw z?6#^UokXh;DrY<^DW$EQAJW0eAJ^+GWTR(Py50&~U$9+EbEdwieAhOrH98qsd$-1e zk-PYFNvpaZ8r+?>2T5}iNm`3>iRk)UvZtACeZc~sW1uB^YB?kx>L7mo7n zPx(kW?p&W!DjCm}V5hm9s=Yp><*xZ>_RS_$OM2_3w+yRVd5qe@8eBTWCiVXc>)5?p zJ9%rL^Z>anmgSoJA811~!t$5R5h>Pe(r~XOywhQyyD7C{=J9nuKM))a1&`mabKa> zI5WE;+qQuXK!h8scEHZw2w0L!Y|&pfY^&;cJ~Ewpd~UX~UXJiz5F_ydm2b4N8V|GH zS~wbgkS10*2nzk^%_f7*{Rj~x55S$C&9!ignS>VI1j*BmgTD>_xQ%FA!_JLEZ6w|g zdF(N!!GkSHM;71Xz8qd8PM_r;cRmBI2ykvO*p;=*gNX`=i7C4QSGi^MvO!(L(|-+4 zBnD*K59{`mBG8ke_Itp()Tb=K+N&wp)0xAKcX2Uax809^-v9CR!{Lw$u)-Xh1ARHK zJ1?yoSoH5`%fF+fj$h*E5l^?x;9!rof5oV{-qVgH7ITmM3P3~1q}G7O^1O#S55hlL z;T$zHntDLVCwqXKXH5%JD!)F#bS1dcCuOL{H#Q%-mT;d)+~FlJp~>OHTmJ^(QC9#;#Y+rh(DyW_ zOdk{E_FY7zuRm0Cy?!%v`{kcw&R0LYcG(V8_6~U+Ydc>UNB|$O1fm%GXivqPf1eWF z|5c-+ozsrQcWd5<1_4yC`>p5ohh*N8z8b0@}U#c`R1sG05_IJ-2fg_4L#I-%3#$!LZKrgw?bom!k z_BxK2Z#87<-n=;klnhF=ykSx+yI~)Ncr72j;K_jrIE3MjQy2^0xBw4C5 zL@*m?rqHCO?$MO+3wGJJW=YXnpOL4Sh8-T)UF=tuUFlP?%6zwCd?z{Q^!N=K0)9%l z+UglzChgYaiHVj79rfp=i*6_!-1MzIWiA%%o|Z)nZT4}xJpY*h;q`Gis-y1LY@2AZ z#g>YbSxA-17QNAe9Tn@TyINLio6~CBD`rA$^SN>(7!ke%S;;BPDOAF93#r}QvqqH+?uW)^BKl%D9ioMY_tg^}9xvwmffXdwJXl!imE!Sq!Ct+@XE*q_wA(N8 z;4h>&CJhLXiN(}2fP(neY0%QQx$fY&{AA|Htm#Zsb91IB*nMurm5>#wVL6ejJM+I# zs5djvZ0Kp5k<2if{-ukh-{0z{R?F<}NXtxE*83S;otkbmXU~rp<<|5=6<4wYqoM!C zWUH}Cv{d2iJrF=fCh5cBKPe#Jo9#*UaJn1kdOh#2u8RbMdke)_7XQGCkU7JWd-uM> zcQ5UTE8)d3T3|V;j$(M|Ei227z<=WllvX7~2`cK#V5uJLhZ$#II-b6q9}+ujs3-xI zo(;ffZ;p`U(1HGdiYI-+ZapuDMck33Vho_9=av*Hhi|ea0dxT!wE_JEx~kU$sPM-cJnVgAspOd`3Xy71-5$*moRLv=E z+|f&UzG()DQxfHhnOUG4q$1C>@?!MW zRM7!xrp*2vm}_o@%DVNfhGo2Oa417cfX9}mkv%#ve*PvF&#`cj(FsinBA#Z*edh~7Nd)e7))BVl`o+oM$1`YE)Gum$#IbUIPG_>)Zx2s;hAhD=Lh>=HXf{RXYFr~*K zcg&Y)q6<&&B7b}D8iS1e1(#grxCi0)!?k&D`U}W5)jjAFRwa?dTz4S2lvR9=2Kzn7 zo`lz_tCl2{J`~Asx>m}g=)eO&Kc5q7WbUN;S?7Qy0|9y-f+=;6k;WFU;6UPH-?e1r#l0A5@{=zoj z1+zAeGEm;C&!=&uXjS^BXjbWM%D@@l+CNM_@rdr9A1s%)SbW4>;|ort5qMa9{uqI0 zs94}2R60X7AWGh3H*0R5{)bGFu4UJCX5LE0XO-D29S}oWH=wOEZO=agSe0mloTmdU zAW)9(oTepNWDpA`e5))ODcw3ok>;CjAR$(=Ve1BU&c=9dS&!NRrC=OTUb2fm+yjmj z;#S+j?>iVLeAJ5j6sLTO*COdW*sAkA8E!ddmaT74n>mvHgFCu$dg^T}_tQn^Z(gqJX+n&5!lLwZhWo$q!W=j%@ou!5u`-)ZKgYBvo@Y z6nxuSoeBC?cPdn#++MRM}Rm?q)S9V-x; z;=oycL>-Q(-O4>@)q8JsC5VbK5teKvI$tenOFNa-YRkP#j|2SAq80DH%A81Ky{{od zF?5M*ZPzx`_5^7hu$ z2;=waRo-=2J!J3<0sQG_Z1u`!45P~U`gbB-V$Pb*?Nk=t^LTYCON|jD)qhzTBW39> z8FaSsVs*Zm;xvA{pqLB|FfXjJq0h*2N*)8?1mJv}(ZlqePuIfX_XrRHHpg{>f>=j? z^sBWeB0zI)-s@(0<4zM4iWoBkRU2t@86mjj{a~umR{O;U8_Ux@Is0}KbcsLFk za}+)OUzX(Hz;)oVxonx-Rr{qN0^s$li7~a=j=JJUvwv~e_qzfCAz25ydAp^yevA^fmliaPKz>EY+l_%EnvWNVPX}R zrI-8PZRL}D!T+d&03tcaJ+W6!H%yWzKHZ2asoZ6c?%f3O^7QezQ8O#HqVfyekWxbx z*$_ZDsE}{KqBv9oLFcv@n7PurZU7+eaG;pUG1!)NV8xgAc+WN#9DY1K6eacA%FoMFjd=bn0IzQD@Oyhm5LxtyMb~U zlG3w9C+`3vC)ZcXj3v3R*lTd^LR5arIH={t=K`sH5D?h7@S~}(bw)H_kanYu<>&Hl zZYTJlH?s%?BAqYdfl;|wB>v}yX+&TZz)vI0-sY#h+6kStVwf4d$~LYD9@KT@tI9 z1C=yMYL--XA=EQ%)>3l$KpfK^kuE{(Jp$U%EY3L%MVKB!W!w_0yTi%G;pIN$n@j8# z!d5Bz+pIq~zd(ELj$f-Fao(0pu7YSnReAX`A)`+e)Q(&DOL)v~WV?Vf>zsjvH;`PB z<>x#8EqVXy5l(>4EpuUdvGQ@5$k3j(ZhTt|>`0YZO-`LuJgV*J?Y#Zo!E-47&m~|6Q|cc*Gq}$<@7R$qw6e4C*+{mhian7or#Bq_5J1x- zPP|axOnww+*SzNp>b!-CIspmWzIQA%pXQ#B#!AeR-5tLBS+2WcX$`g@D8I%z*I7 z9`EH)qkDeR+ErZgx#@?8Dn%71bDDHyBOE>qf76*9=+f!hLV}EG^=d#gifF7rNJ8h~ zr`Q+?2o&YRR_H42(kcOr2TzU(0%#*ph&M%CQGL zq!$)6cae{~@%1z~Cgu?YZ<`5jAP)^usB~5D6*_A^DUmsbi&PE8!S;bLC1}Gb2^&2% zc|g%c-ZTJzE-_nGc5zIq*q%$Of5}w^`>Txi(kqpdEm^7cWy;^@67uE|OKTO%C?4@uCcusOpqD z%X!6wd3|Z9%U2PpJrLfls>~{UjE5LA+s9FqAs?$rqz+9FF3%?93VoV%Ak_A*u*EES z=AEkAf#>dCs}G2!AlcC(3E2g0PJbm$lFSB?k{3a=;ZDgUpvzwmi!th3um9(DxOoCl zj`q^Ly0g+$)C>mfMD4sh(colCh8zxX3P+clj`K8fM?9jVNL?>#;jMSnEb^HWFN5-J zCDDAB#|!AP@u$8oj34wa3#4AR>COsFRD98oJO6;YNngist%S%JxuUL#vtK0ZfMcHO wS+tU~3$H+5{zA2v!4ZHEnyAs8Ak`_RI|NiKCpxVm>HJCI?)7ds0I>i604;+5C;$Ke literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/html/images/dave.gif b/src/SDL2/external/tiff-4.0.3/html/images/dave.gif new file mode 100644 index 0000000000000000000000000000000000000000..c36d447772a630e171de8e8fad5e7ce2cc1cf98e GIT binary patch literal 8220 zcmWle`#;l<<40e6Z5TE-=924N=5FRL#N4ScaxF5~+#7NYZSL2QOD?Iot0YQMq`6B- z$SrcebWs$g(%#?C_xuOX-_G-KEUe6RPI?9bMZh5d>~&XueO|yN>W?_#7Htu5<)p<^ zP0ltk2p1H}3PQg`xbITVo)!_4=RUFXsA)R?=~RyIREmA48KKiqc-D+CVxWn!UIjk{u4mGw|$v?A?RIuZH@2 z%13Id%j+Q!@fmS3F%NOo#l;Y37j>(4ox1=4G2T%V|8%;&6KU}B@Z|_xOY^Vhse_jX zaR)J;WRR6lKgQp3xJAMQp--^%nYhcFd~UWY@@;*{dx0z1yO~{^3>pGZoOs}3M5mqd z9Yh`NctTlopgIwLbMj~}rZG}T%b!FrPR>9}x=;jriavsLVJ*|5qrML^;tKcNvkP+X z&*pNC+nr%!7`YbuLFo~UDnPFERpMcz=Z`Jx%2SHcIUHAd;9MdYIe^2l53I6}b!en| zCeiL4rb+DBNrKry^N&Jyzf1U1i{;0v-7ZY_aB!7sNKl0z`{lhl-sz2L?d#8buc!1l z7(JT)?Sopvmk#V|QtCR7bj!*o8nK>rJpOkF);MUZd7-K7;_u(;JH<8a4|m8kT6ZEd ze&>F`tY5Bx4$`NQNK1lY2DnAqS33u32z_`RHI`30y_a21Bm-oTcG)v#=lwE~9LPAr zCTW(trz0&EnEDKmQ=@55f>SclWi47d%Mu!UvZp2Qs+K5a)+QU*Mg@gkCh~$K$A*&O zG_xlV7GBKB9u`6=kj%o1I%#C6HAe>c`J|gtiNg?1tJK)?3|w=D zF}upN+%l7ByRzm5xKe|zmnh*p}0K;`%QD~Zhg5iS-J7nBmiloN3}?{FG#Tj`V~vM09kIsKt!}KsZGG{ug=qvx>XyXyT&L z8HvSw6HZ3UU=Gr-?Zo?`?E>M=;r4$m(2%}jV(*BVmiZ31RuliMjB*>`tf7-!ZOnme z*u(eBVOIL|HMQv`T-sC;BShtx1RVw0G2uh9-^fIE)Yf~A5#GjINglLZIslWtMFcqn zN{I#Pc)^e#>J(mY#QWi#>b|Aubh^oy=9^t`nc7Y_fu2MVh+J&Tq$_ZQ#s?x)!t^3z z1BapXu(-$`;bH9ONdVMz8JRS2axvubO5=|Q`|l&#$Da&4yw>^+&f-ma>=fu*j3aAMpS%PIVey}F9qacTo(?vd|f!l6gV53j%e10H4P zUHQFXaxHQHtwo;RXJw7$7r(}Ds$AXux$Kc}*z@;(>oOjo9kc2%Ae1-MRbla?ZZ?B` z&6fDxAn_x7y*?<^Owr!?@SVSr`1eHKwHZB8^-@Td6tNl|JqH!NP0Fw!LO4~FOgYO4 zX?htw+z;XDf(L{&tDGKWR0fnYjMl3s7{-}EFqXcJ<&hnh(NENoWYtk7HGx1~eDo=W57uK37 z*L0cbjeG}qsa~3DK^rQ8Nri$RQ)CT(zcQv)qk50*CAerA5U(vuakmtq3beQ0hTKqF zDO4I~WOaTdJiFKh(0vIvm*P9g`+Q@gqJ4yF`muQ!mb#MNF(w6FfC{`zs zXc=nx>2}#ibC+Q?p?uO~CHg8uvoegkgE45f!2=(z-pCXCLIk`2oFQK^vui7(vu=43 zxdrndiXKzNB7Y3{JW4w8a6_Hd&*~M&S*E&BakXjP-RFLTyUcDotq34@E$W*wEWLci_KESN*OQ-ia$rp+stw%mgQh{BJymYkQ&R1$p@pt)2{Rq zY82ztjg$iS^KE&*r_&91N`akeDPbT4dog_;7*%KiI7|l~3R{lDvebE(M{yv)U`>OU zl_AmJA=UP$OU*UvdF$XB?>`dZTW_beUwkyou435uI5g(H@Ha47<73%5cSo?b#PYYU z0JlL)Bj3bN-Rwz}pV%Ib>xzPdhTxRXfT=4g749b2_&R&%281t%3bs@`-v1t{f^;#5 z>JW0t{qOEG@b#9gB+f_IQ<+MB%CGIpVi|4tNQ_M;^&E;g^3-5J`A;>6<9aKQbM|w! zz|kxKt3nriNd~hxwwm|B>6Y^Pq(xl?S7^{QqbT(~+tn4!jQhj3wNB6RgyygusJqG| zZG?c*ted3p{P1vUMN-ojqVIc=Bxw@LxbD7!Dmry>E<=6i*qRMXqD88_BfxLbp)(3Z z&K!OawE>80*o6)MTwPXhelW80XkkQS0>jYoh52RQ=a4*j`{iGfwq7D9aKXaZ?hC@m zCcnrI5PPhg4DAMVbz-J0fE^a=gz!1(~!}XZ)$iR*&RJO~H%qbMNqAjRt z;0W?Ei^!L7{%&S+W9;7dRxpy5adK~|KZL?P)752R7>iI-{A7N%?>BR}no;l7u18-b z-M!@uRzdnb;QDKr$>8?U5Am-P(94!AoFU9~g^U8$2<6r?UzY%TmG8!q18^&sx}6zXW;O&$W`7`c1-92 zfdjc0eS*faJb@Oi3ais#_c4l-k$`fo#NB~hRkI__%Gw*OSjUE+In{&eKJYyY!C0b` z&010HVTt<=5&{M259D}}UJ=t3+xj;Cpj8?$0Ew`;^yFrAcNMq1zv6!qHtTHyTL-?| zuw=J-8}?SgT*!&`biSLk6Yf1CVJWApS8Wx|c&7XLSysFUNLQCEcyF`VbWEc%B(NWA zZH$bPcQI%)d%o;iA(sLd*Itq8AwIuh+aR>iC3F&k65Zr^4!R?@Z7giY!x!I+QPi~a zk`g?tYL~w1-1lAWKdkn32hgL@WvK*}EHiqG!)MdjKutn<0mGf{^)@>T)M*U7rXF zu=&cui%H%4ItfF7%)})G3H(8DUJOqaUnsk4dPvyEDjso)U z30*tlG$bh<*5amjAns=Q%lo3hfG8Iob7M;qsVNXDDWwKNxmeCu`HF{WLLw)v(?Il= zDZ~(f-WyOluE_nKf27nbtIcf%7?o$)t~WTt38-TRMp9pC;i;NT;!g| z@EU|m#rleiNI~HLGan+vz!!=nLG>8opL!CV?Ju6Mb}3s03I;$avdl#*C&?rpk9p;Q z%yar{h5AMieZb`em9*WH&#V%d*p%w3mQAcX|65W`g@nAGBq3Z~{Cwa7R?<}jE7_~* zhBKCIeFkc*h%l)@!A=R}286|~T&qBZK$boTbC#tm%I`Vxjyx3CRBr zOP;ZOdnB%{&gK3yT;=vtp*w!p9qVk@BiL7wgm%M5qcyIE89ZXeiPtG)cAu zBhjj+c!$sCKN>{i2BaD%O`XJ>+bgkUUEI;U$ib0c!lR5PE5A2}es@$j@by^ns>(Nm zu6domVk7`VEAHE&?)j3RhdZZLkp)|zyd>m?nLMwb=k{iGF^{q&L3y`WegX8j19~h> z)~r-}tgHDps}+2=L-q3Ty|RMD;xPL+Kz#zl##>E^qQv{Of#2K{{-x zp2C5iAWT)uYi9Ytm<*u4#yY4TAzO;CeZLysBvOgEy<}XMP4=jXH@l;k{AIom`@VYk?||{T-lnybSek z_BDpd*n$!vT#0^MP3x24rpzKgL%Md{51r&fy=v^kyH9=Y)Cd31{PyK?i0^cAtB zYx3u-F>wt43J$?{u_7`nJeRbL?wKGGerQR;c$amI4Ny<87~`@*?eZ3%ds`0$H2^j! zn7$s+CKH+}1+cB3#N}fvf1EUk(m-4Zi2kg1Dck&Dq3Ly$4qYo`B1)UlryX-nx7qLV zLssKSeq(>9fX``q(^5u|?GDM5)`j!hZP38S>p^e4^_rjhtjdI}&FI~83gProWo7eW zJ`H|!L4Sf*|DG0Qv&8)JI>=FEFwB1$(C$21H|h`$slR~uZBBeAtoMVzeZ!m*dFF@LbXMbIiE#mYQQ?2$ZlG{-ikJ*%D*$r|`c-i`iUyPkM`mh3~ zxb3j~y+P9y8YkPJoyDM;#T5;K0hu-vbJ>BA=m^0}Y_hcx_6JukU`-N;S3D<7GV+Hz zS~vo3Mp2c*bJzw|Zqe2KKhFx$~iy^1rm{TyW)U&T}vwip?<4AH;3eb0znF3YH z2LmF6U1~r%hPwM-T-J6>_VM6Fhasa|uWsj1q@3AGyTZy4ED$1;e^1zXe>7N~qZY+s zNP69=-=Dr>7NHcSZyFWSG$eS`du@~j!g#DZ=$)uOHi>X3ejDdQgeM?4S0=){M+ec- zqj$T)b%@YtbBX(J(@spKN%C==;pF(7!QrJ5|8*9*m}BN#6i;XxxJ(J3TZ}`|weCT9 zLj?t5Z>o zvyJukY@!u4<{+BwZY`I}gVR1MTpB2_!{Tb5oVu{+i6VZHgB7SUt8F>V;pGq*xQD!- zJ{fzE*#E`$UeUECBBvrHWu_gWYUk35nFm(Qg*5#?SA$#W^9od}>J}>nqEoVUJk26E zSrkf2;ri3Szp-agD+?1}0V*Ob!MpuCvdk~Y^XwVmt9^8dG1-@lm22bEkC zadJQfqxtP*6}Pf+nTuGe{vO6w6|+BCE2qHsmAPS)=gFs51-7%K$@tPpVm#G$X~rG) ziWG1wXVvk#?D4-8(l9DsqQTT?Ck?`P{&s54s+u@%_T}FEa4qiZHZt-y*Fxh$v5j?u zQTFw*x3W8~r()#}xa=@qy6LOkrE!(SU#W8iAC?H$#zcjW{bBEcGGl$JG|8{7kE znIs)i-?hicwyxT>uj*8oLSEgiJ@Nz(jx2}eG{rWXYh5G+-;|4l?IvJ^ikt0^w`blQ z?dCeT%nv;vFtYDFml0TlVE5jHU`{e4G9?dF;v=mu5Uq zRNb(qqV^reVz##C)c}`x zwVD3k;YbEPxfZe6HcYb!}}&+=z|6ed^En@Pd53Xm(=76qrPW*ZzbB>JFKUg zEjj5@vgus8@fsN{9J|0m)o=*ZA9+PfH4lmm3R-&2mou0&%jzt!PxSCWhFoe$JEg7l zL9XU$hO3mujEx*6W99LN zS|J(LGq6q~rSh8FIs_m-wUm@lkMsxq}QCZl8F7OAv z%ZmK0AjEClvFEw?-QacuH|md384BSssinkFWVdGt)qHAKO5bJcX?WzDEoJ+JaF1W}+ycp5ZKk4zvZLACyRLs@i4SUDc)QVPhaq+{C2 zWRC(YwAjX_xS!^jTd5fSbjiQWSz!8UOtjFe3S$26_G2X|(wv%7;k`h~V#GWA?ZYR6 zl7oP0+k4NX|J8y5eYuez)D}6vb9qp-lS5eRaN7uv&g!&X12j%483IN2N~WQN7j!5| z7&%MN6oqv=BFIa*ONH?$5LSjoC5JO!$=1~7lDNeLt6uyx&p_M#I_ncwJK&X52fYYy zT4gc&xd`EYjdC!8qRsc%^PdNLrNM5?kWQy^gZ@0G@@&eOEH*6JHsu0(lYV+hY{|Nv zcgjlEyjVA*S>@)O2DMaxOqm%HKhcFxrc)(p>Fk!JfQZ~{DTLdCM%)eN1e+v^&;2Ks z3N*RRzaJYZh)RC@n(L@~v`*t<49(T1(oqIw6&RjDhCh6F?ye|-qs{4jK*HJteEd{& z3VJ;9my^(3vBu!f4CR@W*6*Ta%L$0RO$~O*fEIGP;9c`KqKRZlr*vValUsylhl>|n z(j|JyZOOZRt~&e4ugUH;Qrt4M)QqIZN>iBA{j8xQ;aGNwUv<&-Riw^H2JSk;>rRBb zvo~Fn|M?D=6Xh>0e~MzIUw5cn=BgiyU4?zN@o(&5Q7S>v_w;EiG%m6HU0S$s=pso$ zQ1*fsTIT2ccH8`tn|EDM8YQ|jzC>{F?3GK((}uXxOVXW6A%%3mE--LAZuo5pBHf z+}HX*5fp_R!NXgKxG$keMpx*Zaa7&C+~zBmt$p0gFd9z@*->Vc7h_v$EPl3yw@Z%; zy1$pA~(~d*#dNP{b zwa8OQc4t7~-b$>uKCPdB9)fA3Lv%YJ@GEq4_){8oHFo{i&v#awGT9yrr+WnDElxJo zoreFn1CelrcdsGG;So6&#Z`fp>?VIkl`I#rW!WBK_#&-~v zDtE~%7u@cIox5&gC~(}IkI$i_IvWl7+O8K(bc*2<04vcHGJu8m@LZc1f0JSB5tXux z@_DLqRw6U9Dyy*gVgrE5XCw<8L7-ow$M{{oCzd#@3)r?iwwvK%f$5|nE|A9g_fRmX z9F;xigcuD0LpFM^8Kz)U&StbRYhxFHd2@jFvyKkqCm5mK8lj>aEA;ngL6qyq*CA_{ z(%eDW~TPglgt~KDV%ZZ(c(qhrr4Zg(jUlqtbdCpJN)MMALfyzbd1>diW%ATj_ zv-0zl%sVIwaQ?RD+?cHI*1OJw+Ur~=w6JK8^&n+jsZnYxHBi1LhitERR3l)>Z=|!sa$hDAMxP|up=!77h(XjYGis# zf^zURiX$g^4OAd6EjMeAgBxlweZq|WU=E`$G0d|Pv&QqjnN-xR$LU%)yjJooWBv4O z%#H{nYAnu%^%EIjf-And5W$(!l9fBfL>dd6G+4{L+%fn#z~1EQ;=0hy{NI}aziNe( zg!P@fbs2uJ{ZF0X=R?*#zP)G@fCy14r4345j-5S2UDl#DNeF%eKhKV|WED$C%n7&p5VrBh@&oirV#-}?y#-da_?gV$i?v#xjjs<1DiF3NG zHP3SC=jDAjw=H?8Zym@LN_pLVKb31SBlcp|T>YI(yT&I*{62iHHoWEY7hhC?w`|CI z+vRUsak8hH>9}8%HyR+d?$Vn+7?5c)K~uGOHkncKs3`iDb61H=)kv;-`pJ0cSA~VC zIctskCzpcQ-~X8!Qpdynus)Dl-H9xj2x{k|U#i~}i|~iN`YG2S@`dN)^G;Dk0!u*z z3qqIi2lcYuv!UU<^KYbYll^+!{V#^jO{_jStoj|e8}Uu|ZKOf8uT&{CTKN3pmQ4E# zPdDGhJeOymKUB6Zi++d^Uzpfxe)8hg*)SSg#~9+0PX9+_aM0`Mp}@4m$20{%HK=Pf zwf?Y63V%8K+@BBjGeJ1^+;DHb#f1Z=PI1FkkJK8?1ucPJFN0pJs-L;FdD9@SJ^g(W zh0}de`7-(UBTlh3EtUCx##BeCZS#KmwHIsq&C#QF$S?eJ3rk&Hkgiqa&v^CseZk|) z8M)r!o$2kL*TyvsKDx&QLg@p9lZ8~sA(t8bW_v5)ryNzSYg HK=1zmtoJ7? literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/html/images/info.gif b/src/SDL2/external/tiff-4.0.3/html/images/info.gif new file mode 100644 index 0000000000000000000000000000000000000000..783d63153ec9268f7e17f3887a844c2a8741e3ce GIT binary patch literal 131 zcmZ?wbhEHbRA5kG_{hMJl$4Z^knsQie+GtUia%Kx8Gt|sM1bTOnL=9nSDt>$zj%&F zZ+E`$&d0nJj~sf{IOnFX>g(4$lFfWt?d~d{b^7T#FEq2Z&FGFqlI!W hi^EyjTy^5q9{u&HSRnS|fz|5kZ?^q@tHHov4FK7YGsge` literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/html/images/jello.jpg b/src/SDL2/external/tiff-4.0.3/html/images/jello.jpg new file mode 100644 index 0000000000000000000000000000000000000000..df99e663ef3b35d30b6031435bb3e3d6d57faeab GIT binary patch literal 13744 zcmbVzdpy&9`1f}vL$VIK+iEsN>6}A{jm@Y#r^=-h0&m8Ao^ zb4)^Nql3v5g{Vz4bKZu{%=7K{9Dl#Rp6B^``Qtk~e6G)R?YiEFkJ*mdUSPhbtA{H9 zfdBvm`~hZlfa?yQoi2VP9|wzr`z`h#kD`V}gj?8ew82?e_#BUQu)uDzwcmu>Y+LL`0tq3l9bFZH#9-fgOOMfdR~5jv)*NGcqzXHZhxLGIy>C za^WJlnfX!-+I%SrWns0^+G53eOB8DLwl(W*Y&UP-jIqWMuy**3_M7egya~j}$jD@_ z31Z$ngxzw~a=ZWMYqkzpUzPV3t+%_=Rp4B0{+JZ(Sz#GF@PBw z8P5fuP&OaXgFvBr`p`LZ^!34KCxU+m^cT!oxZKvoVA0;AuoVx>i<_{|0}Tn9oKij1PTF@2VDRVfzesu-$+&#<(3T#4a1uWR=?vEM#PAk+wpKj`SfGQE%G zHfrlUs8+*jE`9a-&fYQ?%qIGA#E7V8?9-gX8*LuGT-1?}6fZ1tpM>9;1%ldD>S`o6 zMC=rbXmlhIrCPIh;AdiGKeEX0)4d-X)}hn# zbi8&h4R`zCr)i`Bt`rv+|7?`@jO7oWp9P+3w6#+0^!_Z@#xtvB70k4XaQ32(kk5VO zzD`jZClemn0b?mXp+35ve6fMy||vd^=N-5PUg)Y}bFJZIUj; zvxM@i%a`fFp;f0&MIiu$}J8~BAa?t2d%*0t> zsnh>XWSH5R;Wy0mxFJ4(khYhsVy(k$Y>6H9axsPnQkaP~Cx0J%es}!`GCZ3G5QUGl zGN&f~`DWW|u^hTkEzNA}5Lg2_?aXigYvaxs;^*-msbu{G2a`z0&mZ6LBmPsK;s0eV ztqV~4#%9q_REkK$O-eYCdi7ezUQvWOEW8_QUDA|)hxz9XW`RR0HTa1Wd53QDF;+@| z&fTm2dg})3R)m)+Z8aew7)=yzzK>9(TdBl(&7_|lGhVb5H+x-ev0Sm=PWPV{9rRpr zRXYn*>*6Iz^nftK_r0TA#n)&HVI>m?^pDd2=MB90hIucp-!WEJPq?@Tz2E6b4Hnm* zry5F*1GDw{4jz2dc&dD+`PLDC<3`!sm~DYgBTn9wl=2|6-uEeH*Bq42gVr? z&H{(6bbe;~XRXd!XECHaZ{m8IE_$fNP;ZS7WD`3WS}#kDbJCs@ZhngEtTwKFZo7Sohdi1+x0nJ zO35ssx=MQfug5WX0ILCk7)p_eHm65z%^L6Rqh>MH(gJKV{h@`$+&63+Ar=Zy*l=M> zG`h5Uu|q1rk91avIW9=ywd=-2XE> zZ1KV^@#f`^i(?5XIO`H&`&aHgy~>>%CYkni!jE(aSO8Dq{?2(r4X7M`i;Yv75?Uw- zKGpSgynZ?Jo0OnC3NlIf`)nxZ#8>h1uzrC*EwB?u|Nr zSygXcLBJ7b$Y7+{qnt)&TxLr84!*Wlr7 zGIj!1Z1CWCmw=jDRcDnb?qWqK>YGUie(pF&aMy@CXMr!y^9PS`qlcvU30Wz*C_&u* zY-3BMey|iPpnh{!);CQ!u{|5>a=UCG@#chNaIWWWY+ZIL_x5`!eg=lQGa+-G1=_*d zSlPJseDeH+)$fz@RMsLUcZTBWXYxFNT+nL=8`o!#F-GI$KE06#aw?4N->?Qigs>_( zKXTu(4y&7i_QQz;*jG-TtM@pn+yJ2>bEM|Ykp}eQjhR0@c3JHo{0RGa>EUzHBV^Oe zoS2EgWu<8!!kTV6Z(D3F>6VK)HPfcI<;AGI+pnP93ztfb^8owoI4Db38#phnOmWH0 z(^GmS2zMd6p!l~ksJ$y{Ym(WQO~YU3{GFWaC9~3xA@Jiz>V}m3v8hvECr)o^e)MFO zQ%L3tF;e{7Y5~VCmO;)OEIqs@zxi4)=Pj2+daJvBnySs>&2j6=>lQD{%Ok%|e0J?U`{U9QXc~h>A1iz%=9{__NQC4W zr(C+x(r%VME2-AEr(K=ozM-jUgCdl}OX=haK)joF=>0?08UDVa;cuVfIB?seRSRGt z=)>dGG!bryE#(ota5={8aLak@oE9mE!?`1GU)(?Ge=6X+hd!&J*hSz}1;*KYnqAg< zv@37NYaiExD z8;Jh32AA#KU&k+iDi-8^Vj5vltN8|00ZJh}V|iuI3)}ndA53FSO<{RMofRbE>IlxU zCsp6>6;K&;JVxSF_6469`j6vj@~Pq&f*0LKbid-orG{lk4`$3U4Nx|j!@L|!<0hLd zt)72~a*apUNkYVh@)Qx%G3MN7OoPPM)dKrM-g}(7R`6Lpb!aQ6xK)*?lzZzO$#JX_~ZECal94acl-+(r)GrRAC zBVTB25)?!xPW8i7pFGW;TS$}}J;cSnI!wBSM6Wu^UudLLs z4Mv%=rIyJCG~MgGBX7^{JCoRAYG%?KqDkV_?)JM7&Pb-mChe`RJNa1*p<()a%baa=`&_4AgtZ#iiVX98n&dF6Y@ATXi zbE1pn<7M9o#5NJrmw8sKHyhm*Eae5nA~w@O5;Fy{*qc+=?4imJvtS29>d#1dQm}a! z+K#-_N2iSzKmp^<+Dp_d4#82OOS+z-$4T2TV`jC07kKBNI#;tb0V~F` z?WZ)Vrdfcn+K6FF>Efv6V1p_IEZ9lde1nV7tz(miQRghTY)BK<7rhjrKp1-MQ*_#GRLu;5yd*T8<7Si~D_~+^qP0 z!D+x5XQN4hT37aQz&BoT(;SXsBoc!pPB+RPA6Xw+>gg;z%A}~1UTb5D&SZZ)oNp_i z5<|h{dv!-Y)>xkL69rs4Dki7}Z3?w%*uJ@y0g~(`);(I?>$cEjXRHoGYS2zhyxVgk ze~4nBTU6a{MU`t5qS`H4{HzyCJ72ARaK_T{Hfj;bH~ov(?|xPaz;>H3=$cw#_3x|X z<)2yB#MM&FAI$U^ZnvG6(=?M*b|n$HWogCwn-Ai8b6=4w)DvJ>w@#z=#z_dw2PJre zMjD~EVx6W0qGFP+#xouE(LUQjiTFbU@7_c3ja10R)t;_P7)mr(s#U(j4gD;+>1R0i zc@q%K&XK9Y>5H1z`F+eP1ek0(3*@ywO3GT_^#)HVAl+=GIaW(K;TdhC5&^xkgn%&wIaxP7rY!PbJ{_LisLR;(GTKCD5T5)T@X5%trBe6B0q3RN; zs{4K!SnF6yR?`e!804Qsh}W*}RMZ)l;FbsPwb$-{UZgs~IiK3sgQ`3s;5^z{N`TmP(q7~r6To2@s+bKQ7We+?>Cd* zSFEV6I(=D@?J+Oxz!vayQYC;O8NUsv0ku7WSs+p*r%aM&u)_EU7 z#ssP%nLP7DVf`w}FkdBoZ9kAmgiDo$%L8`jn@0hb=2f~NsaaRZSR+c+JCj)0az1BO z-Q0yh9nPA`y*Yqs3qaPpH`PC>7`*xIS~gI42ndw2DACJCUK#A2k%Mmr?WJ(%ltvgQdlmmc*Gev%sdjf&~>*k@0vY*o&U%m6aE@ z8h%Jfsgr6ow3x?=9ar;$sdZKqVIWAGRT$3-uMay8{d`)KnYH|w*ET&`RvQR1#@8Nx zwr!}yYWK2>Ci@P6#2HMneBY(u-t4YeaWN`7pFfUQYM=Pql;(u) zU&vbLQd5LKMa+p(!l9jqI_fIlyKHUs`&mL|DO4)qPoX## zsK?fU%cpUOjYU`XevEXl)2tDCk(_#(OPrTGt7~-OB&5^p+9EH91I0HtbvJ=a4!ZN@ z*3L&BYKFxk7WhSOSJOEc=Te!rpIx-IL0`Ekb;yyHYffp5Y*(VtlBWrS+B+XT z3`Xa#&Bw0Ki;CwHsuRv>3+ve7P11QO?VT-f-CLi$IcDcOzC#3F$vQ$tABSCCyn`7P zNoBR0zm&FrziralL9K6UhT+*s&{Cc=v*5Wj9}G@UB2d@7PEqB|oE=ay_V5_l0If+8C23qy=o z4l&51Lya;{9qr4!znnGxYq?c7EYJ?piiq2E&S__c9?g`;3YrD>oex}vzrn+7Q*+HP zvo?eYUL1oLBb%gJ!i)Bb2)~BK{qe|prBnX+h^lZQ(S}2VHc6x^jqb?W!PqLFawaQ6jYs5^*EP&0wPE9*}*VywB{-O{yDNsxfWiIJ!SkOihxX1?`#M(YcPg)x% z4O2jLS`*j&>zuY*7$ndr0t7}plY7@geo}I#=xlnr#|z3F7M?2-DIcwGFkAV8Xs}9jy<#PGg6( zMJ;&6cmXQNRYa-cnSY<_P*ncitDdW@=6D8g!`2VmPN8dXsulUU=R&r5MdrGp1@aNr zv2RaSR(!%IC*%1I3kmT~9lbNutRMGpFMP(BZ)2NnN4aL(*%hM0VP*X>*2C>6DhUQ;jZCLr+#sGiKjyBd_B^N~Gp_R8GZeu`Rc09U^+@U)^$xG%{ zF3)fh%hm7?jLd*=i4@zbl1ySa_Bxz-sC!*yos~%>P9})(9brm~%~GQB*YWL^6yMiC zM8#s64}|lnISwhb2Dum^@r7#_$2E%D1JV?ocz)P8E1Dr)#8#{P{7}%g4_XW-(WJ0VwInjwdtvPWe8ZzMY_t1Eehq8_+ z)@WK>4dAayUWqi#R<}=>_9)b<0w!n_^)lYWNtH`=O<6qI~eZy?TLah^<>3lN5CQCS{PComhKk7FfjcTx@+- z=!Eq=P1gI>^t{c~F(kA~W7=~yi~G#!LUG`6hpECn)*A>* z)ab3RV&2?AnqFfWWAkv@)&LI7E(Hno<%iNz?@x%M>7c-Pcvccgs zAevPO)bEZT={pWxPYQ?@qh^5&u!ruik^hXBmI!{+dFrMj+EB@1Snci@rH(5t!e)+V zc1fR(RB>%K#4q1aRg!6htiviTU#3l={1%n?HA~kosfMJ|_k0sTnY!z0?(xq}&DzB- z+P@hg(ww>psO1*dVJXw_1kOTAaKU6G0oo@8i@E>$MBMM*vvFrX)xUbjglztg2PbUI zR{1HI;zF$#MZMqb<<+-Q|1N;0H_kB%ewz&V7&S-YCW*`o-*=V`eH^cOTckS;Z3N*A zPL>P;t;hFf(nAc+y@$EnMAiu-KGarh`F7!B_mWfDXOrB%CVFPxU%X_*>g7rABge}Z z9_w;FlvxGPl87x6gJVyYuk?qqPBbZHy2Qu1-4DtSEJLwP;?Ka2f^<27p7Qv;q2ZHK zG;2_t&S&>Zq$hDILSk*RsrSIwsafE_Mz6T< zcA%B>DJ07D0J^&w2F>Xlm9sou(qSi?5AcfHp`E(>|c^O zDNi;cs`bC>7X8=ODdQ-=bJm43B!!^8Y*Q_-mZXsD#>{$6iI=8t4hacyVwvC>Vh|7# zSUk|lP&%bn%vYH^NX;{FLrT?5Vt?ngIIHM7oRB2q1vU(X{q)#}upk!)JAk;f;YVs! z--~vfB@h4SuFUw&j;$)GT%aDNJ9YVpu~tgH4TW$2&M^#ICqN2$ykfPqGA|l|iiPF~ z)WqAW%?HW040MJ$ePb?I+)h>RR-@mhbeN23Uyl7?n=x}UEa<-N?d^|L52guUJ|Lbg z&kh4V7`8o!@<4}cBr+oQp(FKKW5-hK588`dayRXdzr_h$Z&4lB)tW=^>I z!d1{dNvel1Ajdy4Zr#rG@n7-dwwG7dVI~{Vvp_C|`aLeQPcOiw@MH4u+!fU(;-Yzf zzg+e7AZxJmepbpQ#5C=I6kFB)?#qos?PZz`*+W&DRg2ce`LDf!-+Akn7T1%D@em+L_SjpU95(?(aVQ)wH2fF$?Gw+-%ywR!OZ{ zo?g9V-kE4=O?=GbX%AF3`{9#w^KW+6nLCaWXXs*|H}8V5;tE`E61qqC)Gv4vC2rBs zv)p6F^HL4#N4OCRnJ;p@y5mCl;jSW=URrdWl6VaRiWT%}&%gKl6T2@U7|KXO{uxU} zhmJ?u#Sc?DJ5?jTb1y=FBM7D>49Q=4|H{>;pUg_zI$wSXM_miBkwikwDJ)TES;(#= zHF2%_{9kfmMXg$EX@A_k9z^s`H;zd3nL0^~xJ21c6e5nTbv^agV@>p$Q?!Qqn6hV+ zPz?5rDesY>b{2TF|GcJaVfM$B#vYPn+cvghsHgRxcK2!j5c&rTJ9pift}OM8q;18D z@9uix4dKlPloKfy4!&^Gv|a` zL5~L_dvn+A#!d^qtxEHyc*<>fYu4}Wd7Pv(thwDF&i{bLN(RD3_t^qd|-|@j(<-X@v zv$^*o@RRtMK~S}^jD7QAuyMNl)z!8_D+q_{#isO>`Ct5wwH*JomwAEntOxW}ZxPuS zLa0m^^~(u)J4UE6trV62Ub2iqwuZJTgsMr^y3(9 zSROj{Ug>lU|8%eYL;U;KIi;5WR)`f^cuNUt(_ol2?mH=Q>v+%oLHkqXe~AzUHRVii z=e4cLZf&toyQ6fwYX0(Tg?;~V!uGE;sj;mhL^%u-2cF2fbAq`#(3WgUHdSOrsr%2s3}~Rp-gp`>tCEjHxIn3j&2bxNqd+q$yGm0V+-bj)fOiL3o4ltqC5yrZ}xij|EuuL|k*if<6ZS}i2OiB@NkLY1r zbjL>V8q8gz)!)=f$B3BLO1aDD1Ds3aw&!i{9$m7{IF zKG#xk@8aD(-#joUVj0pb!46&gwx3f8Pxwv=&QikpHmLk-8TE~C(5o<~Ph5{3n|M|= z|MW$ub8CwaqqObwPu*JWZ;*bOKc&`!!X>lp>!I_TU$Wh-ZZ+w82mto5uCu zH+tgVWc}wmy&cv!5}(D=@JnCccxYCu*GFa`zOL$CI}1E-h6vg#kiRM^ag&IZ7qhj< zFPGkk9_~q4TKF1NQ8Kh2v9FO~WAol<_7fAR7I+P~!NjW`iM{HxLw64++^mY8{`_xn z))2@u#kH~naHjGh`SvFJk)>cIvwXPbVF`Y>!&&Fmr$=<{icYhA7&8i;GeF`cx zuNoHL`ZebF#i8W$*?(HZ%}!&&Uqm5sCh1j+nIzl2*}#>Ak#awLFI8PVu(P_GP`YIP z5&LY(qwl(^WtDP{gF=3{xem|3P;~TWqVbI7CPBlpUEi&KX?QPZfs}8vKm*3|>WAlu zH7otMl0v(}ySoz@0;j=i2L?QisZpH8K_SFTpY4Ry@v4Zz+$-INz62r$I-}VA_9wP#o zZcE3(sr`aMN>P5q?=JR>q_N5gu{n|Z^N_#U%d^*0#|L^ZC%;+o&^w;84%i$em$Y*eiZ(7#9!vLr<|+5wPN?S(iZ;W&#uluN)P8k z^kmV&)BgER2Kmt*s@$rXQ|}}Onu&xvMW|O7Ud-`!o@feB%e)ZQnBjCj6AqJrO8kk5 z;skh3`@=o1e#2Vf{Wrhw99ipW_xRqxce-TrX@AZeuluni#LRTe6aOQ>pA?>oEl=~U zS>XnG9=T%<>N#oxseSxNw1n|~N*Gr+qD~vYh^IR?9{#ZU{>9b@S&jTeL+zf^ z_$Lc{zc~1J?ztsB_8j^9fU!^H-G~Afy;AwAoF;~5LWG1DU#mz{ySUhCRNyR7gO%!_ zZrYXO^NB6_7D{y3EMUs@AFchu5a|->lFy)6BY9nWQ5R7^3uJxiV`6*Z{^LE1NhqCF zwQY7M(oYitzz5dxB9>HGeY=kkEJV}Ce%$!*qhU^8_dC(W19x4|!x{rP^o)wHH72zg zFO0XK9{ZN(igls98&U*{aLDU{CYCNa_E=g#UmGh*WBer^o_OXG7XIk*=O-oN+;6Hu zy3njPqyjaQYv*Q+WYU8an)ZsBtjyP!6QxB{6`ORE;7LgRu2KERt7XFeCCp@Dwp4{M)tfsyGk~^A^4Kxa@P}Gu6A}bO^Wu3uWn)P-}7Gw zK&r3uSjA4WfOLzPj3s0CzbMo%tMHXlQJqGYi`VccV!LA>kc+f&F{_j?v-91lIbDQB|KdOT=UYX3CQ<7r~<#xH({m#kiaXdcRw;&lCw z!^|Qd8KJvOP%%XpNj>f-Zdk@!;ntHewge4G;n}{ih0saw6nWn!bWQb%n!fB`Lnp+O zwc}3r=DxiX_?NNS$;x7@+K+tKlgB+Q6^m2m9P$!zy-$CMo_BQ1GhFD$(+=!COUq-q z0cZgd^YK@u#bvI_HiSWb@5>Sut3lTz`|!?nCdG#M8?Ni7xQb4BKu6J%Czn~ZR(Ctk z>0FVw79O?r_T1bT^QBY!O;#lZvg3MvVq`fv%rYr4;uQdmC+_ZjFJ)3xa*ql5M@F}h zZ-f6j6ED|L1K_E0y70@S{X1P-#`p^oAC1nsG7uYCWOH7*S6B`9OR1b`m2nL4y(tEw zPUkO~ydwNAMa3u%Vj8%LA@A}D{x2`b=hm3r;5mqOU*C+XPI-G5?%ndEXOt8=_g&G| zjUK+g%fELjPmnr>Z9y5PHLHKVg7xNM>bj1gc@g%@>yMV`?u;CGqv!VCHmlhl8#ikMC;kumc(KUj<)CbV$4K|-E1aNwms*J6l%?&w}hssUIjp<2nz9w3-Jsu6=~ zuR|ot6xKJ=)2Y@)S9T}QMfI9W7*e7%g{&IP35zu7bphDuu27Dn$~-I&S&HIBdd`pE&E5MNPyEwN#Ir>U9us zLqP9KSqhe~D;(k$m{vfyeUllOw+$&-ZCO!EZ_Q;WSQ8~g(8UbPd zinUaLK1cz@-JqAjo=*$CPXPCRRPJiDt{#-#$2i?dwLdchVx-n=rDRel)6A^#GVmbS zHw}=e1H_F^rFFq5GP1E3J~~4;J!z5b<>lUVCfh3x6bM*milTQ-Mk`Pos`WD>eHE3djvZjor*@vH7efOWtaGgER~d3?9@GFV>kf+b7u4|5PBa9 z#iJy2uGHBZ2rzAcauqXSy;L?^43$kK=%OKPli(1Dkm$nHRhsuhDpyvSyyZCKnzUKA88vQ7K|Sa;Y7X2}>Y0V7N8Q?6pqc zK<~xN{vGiVD5;BTrHxYcuN)-y{aD91cnnIeW+$#0fX3mlDD>@S(D@4gomz#EWN~nK zDX-S6ZLA5gLEuHBXQ0^(Z6 z#gCJ#1avZ(MQvd`UNUS&ZNgcCmI3%c{-0wjQ$Wju(7BvgjYNtO-G66+oU; zgD7+OC|l9N;LucJ1X!u7nEBRh#<-iWPz`Q;9{ArEQ3lS_c_AtNpj@x^IjdU;JHr^8 z5_i!=mk{gHgjmfqStkE}kr0n;0`!t{U)R*a$&aF!F~%WQVvvGv>JvPKAuLmbE}hI= zjY*Pq?YW8%*$q5AgE9qH;HJ-p-}CgM4D8~hW4(zzv%p?HVxC3ts9|$FSje!SLYkpu zk{~>v7)fL6kUX)z7;h^rz{x;kRQAq7fMVXB=!a8fpifo261Z*6w4b7|XDIwclKjH= zWhp(CNHHO9gstK7+4S#NOx#7KJV&j|oysq?kZ_C;P0D($ur_dxO(i=t2Mqo+rdX|^ z6#|(d?UUavK}9UW+#|H z?ryJ~?x>r7S3}W3c?6Ab6(8cuh?cSF{j2Nt@_%*&(>I+Tle0OiAvPX3As#hON6(N* zd3jXE`6`{9Iz{eZ<1VkaHn(p{V2|}^8K18ieb{t9OW@@`GNegbnS2tO!l3_4gvdwQ zWk0S~A+hxmwl0*&1xI^MYK1XGxF^34Di>7g0)DfubJAc4t0>nvK`;EFV>G1Z1)pRc z4j`o(l@jCWQ)Pt-juW70I^t#7-M|O*1@bf%$Zc06?Ann!#9r+!{9W+rh1;{;Bnz=fksKUGs* z(@@VCwB%P#n8ljrIP@#7fzjVEy>hbHXJX_8F4pAHu{bm1aZQ8 zOrJC4c?z3@)jua}uORJ?=0*8|jzY+20-X)_#}43>Sd>^)?hvhYIB^>@`|ZC0&ugv6 literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/html/images/jim.gif b/src/SDL2/external/tiff-4.0.3/html/images/jim.gif new file mode 100644 index 0000000000000000000000000000000000000000..9a18a031fac72973e00b7fee7055774cbc6a43f9 GIT binary patch literal 14493 zcmWlgc{r5q`^KN=nUxu1hMBQ5#$fDY4N1?~w=~uyX$HwwO+qTwGsaFrk|K>YmFyM0 z)jNYMrCy}cJ|t<^uHHA_U%%`B`;Y6okK??L>vNvBx38C@lb{$l2Yds7yu3WISlry) z+|<lbuU}tBSm6f%3@7~(l+M1f0-rnBs?(X8^;(~&LprD|@z(5j-q^PK9 zWMsr*u`DbsOifMCo;`c!%$b;&m@Qkj&}cMORn_wH^3u{$TU*=2#Kidccn=ScjT<+H zg@rMhOa_Ai!?25sOG870mX?;LreW&>dGBPqcIy(IQ{SgGIuC8XY*_$_S=5RO^ z3Pn#(&&kQDt*!0!>C?Kpx@u}_$BrG-(a|vn{?z~X;)z{>>CN8e-y_;|x1Dg&HSsY# zGq}t7{AfzX*w$Tv=V_L={O9(W8Fm#8UZ_}mv1>G7q%f@ic;IcTPr(O*qavbn1ZHam zYaNRUdL%C6Sa#Al}M~ zY0sjtO>p$;qDb?d#Wm$?o69SvU8;^(tu=bQf(=t-K3m^t_Es?^*3G{K(uURz_h!L1KvMtrbO%oVq=!a`avSgz?h0fEivn>V_U} z)sc-`{zgMvo%&wJ4wEpZq5M&VDZbLZju&_v=H!-gdC#u%|HMXR0ZlRPn4q9MR6 zk{Pgh9%z~|AKg0OzP*cZP?=pLo6W|!x&p1=r0&JqRG&3<=sORcNT!X6Zd)%rY&>qW zvDy(B7{&xN*@TS>X5p?FlVC~pTBcj#LCfgTbDJh`5s%_tOHf1(2S8y_4lo}@RB>bw zorw$yNxdZZvAgZW)ICdZC5M*{-VQi3?l)1EdMZs&+gM;|6w%{rVrs97!PS+33MA@` zaN|~XMEFM1=Xw}P&iEvM?TR@k1l%?!M2hj&&QLcvQK?XuahE$+ zT{z{0RW*E{5)3NkMe=2s(MaLqX*V~XyEo|j=pJ-7-0$&4jkscY4%%&T`&kqmdW!@l zI9DmIkj|D(kZhMb;lC(Z-4&-SulOjcclkBMufF@csex}2h#FJyD3GC6KS{ZJM(O46 z69ahb`7gITwBRyvsX-YJ0!41*iV=MP*o0NCJ6{t4EiWA*P^3m5c3e?H9`7<;2EZWs z)0^sqYu_hCzLpp9s>W5712gO2;TI~Lwx_%pz5XtgCsIO}@mO0jUt-|RdgDu$sqe2l z3`R2&8Bmk5oyTK0fhlYEu724&-na&Peh|eDC3_is`|vdHxqZU`m)Y%{N|NSS45&B@ zy?TsKSGT^}*7GxmF^Ia*e`&{d|C?8(1hQQi3RX^Q2DX!OUyBv1qmwQBu5{Hztw0PO zpc-doeJLh(qE&qz(<}J_e$V~s{eeyioETqQTt|-)<}ttfOguS-`a0=DUV1&0_`1S> zcgK5P)Y;<|VWurx9x_cV-tF%!Mj3eQ$=YYs79;#!dSTuRm+>oSf9#dUd(K6B4)0M9 zG<5w-gr<+e)+vJ!mJKVkU9P=%PsvF+LF5H@gNTox{>zG|S3-p*Pnt?2FA5Q&+k{JC zLblM;-Q!DA)9Qh-q;O6)mOdarF`Nvc;YARY?=!@-S;C&{LwDtbX5akQXtn8+6v_x` zS5#Wedik~j2Tef0L;!H+Zg2#d2a$7_-qbS9Rl44&xJd+i!biMrWr8BD>SW^7`eaIM zK5&O~b7RY-w|5efZ@3tAM1?1T3@60P^K!ID)I1sY0GpmNpjyWX*CW8$bhLCcp*0j6 z)5uDD&j&WK5T!tgibC%kG|Bx(>yZ%DTq;~o_u)c5_krX8SrT-XH85=g)b9idR>21$ zIFLo!L-opss~O>lpvonR2dg3a&GH;`wn(G0AMSLlFHL5-sU~UO za4?;{lQ0jU-6Y^%zKO2A=GzGM$5NDT8KP7o@iwZ4nQHqypiCG8z#=ntr<5NKVC>1D zf|n3M=LDk+BjOda$8t$eBq(q4HsymWWbnER1w5)5m>cL@qj0PZe3L3An6`8sj6k!( z#tQH@4azYHAEV6&l}plH!hH_og59g?VLq5#%J*SbbNdyC041s&W_)7I*YJeTIZw%Y z+%f`aE+Mq)uUO+wZX<(?bz7vIG9Xb(4c!PEim^n5d4yz>bAsV#Nq|C9>gX?V^R^#k?$s)#rwiU=A(%m(24xR@gOStH!)_wBlA6)PlLhCeuC@rz)t)-YFlT8 zQKzKATh0wW!7a4xlt9B*5CwUr@9T@!nD3)FTVI~qXXURy{AT$YH9EJ4w<=$za}9y76U+y-3T8TY41sEreBuYL(UE5O4VL0 z%3{3YoshL3N0W9rH1!&;)88DJDJ%V=C{EuxRI;OBUuFwu(k^PU(sSKQU6J;=hq{=v z2^4fzvkndW?3f$FfN%9bxqojQTz-wbU)-o6!bI$KAM|LTw#MJMbU8~s1od9Nit49l zrh1y86B=}AD4!Gm{zzoca;k7wv9eHX8PczWYWx;lA#E|;G|dbcNj%Pt2arp>lE2G` zg?VZ<4%2->PVHWYokLy3L+@>}E4`43otG4miE_4Q48}fE|H8>wG)-afNF2LLBLcv>lX2}?YD%O@=lc->4!Hv zoIXSr*P;zgt>xU)H}6*kKCHn!fh;cUf(Z$XS6bIqOL3}x8Nr_h2JGYasMh%!oy0zJ zr}=HXX&SD4`p#qcm-uH?SGpp@cG1SQ*)4-KWr1rz6cbiLa51J$KQwWZ_D#68rBc7Y zcMGk$i9MgUzb-d&0k<#SNaMr)qpAL5bDW1%6cWnXA*1)@B?Ho(KQoe>RsE_zn_R3X zKU*!^0`3#v!syK!5fM zWzPp+$+x{;Qn^hh6@9YJiB;SwAu?^Ot{Nm3ePLF~F$>4M?(_eMJQTFc0i<|t$!4W- z)zW43!En^~2~XWl@|htqBhGX|oXYZ`-&mnoD()g!l|eMd=IJ1&3s~qPEx3WwW!tEm zFm*hSZf=P8ZIUSb_Zbx|R`9#5@x4sXV!@tZoq=Lx;CUz<4R!OrxfWnl$%JAzV60{z7(%D=3Kp;6PjQ&@WKUfcj%jk@y1_W3EfP#ST zDj}@#0)hv@#5gdko3v6b&3%ZaF2XM8G#B4abfo}@oj~o$jZ-l4^~pQx?O?Uez?>hy zZrwB#^}-UFvAnocx_03>k+Ld!j}`z!*s>}|H?yT&yYF6hJPjjhL5bKnM2HGQ zP;{Ph{0rZZp^eXM09&5QL^{eXZ38O|TXQye@3-&^_BAR?7=FZ>h)=*KZ_AeD0IH`}B009AmY(O^-WG97+(}LF^C?^ScF&wyCi87FE zSxpAmLcodxfIMK%BZ_@7${z_1S+YILQ5`P}jR7!zOB+@v@k1v_1)dt_GthZedjGCt zZTcup9$-y|@Ejnh0lKPgyfamyuFRl6jrel|yK-X$15qxl+~ju#)a7Vm_@IY_heK!3 zMO59u2Eb;b!EpjqD}yK!Duvv7gO`Qlvpvc-IGi+2h5a)x~#=r_xDF7kZ+xPKEnb(1Ah{aE7;Sz5` zP^=U+6vLjs0-WkbF&P^lo2oob+j^nd+f2IQP*LbA0P;<*^``r>?2pcAG_2mYA&1Ag z;itZL&bF)DB`Cg4WUpE>Q5?g=)HK&$b(tXO}kb2(nNEoB(D%-4{p!%`=Lkk@NXFYWtk@q zx8g~wjXTx0-<7PsF_=4uTK`mHbVpS&C){WaMX+K7Yt-)IeW7H%6riFtbZ?O}XEQi< zkImA8ODx{5dL&a)58q(>8V05tTdKA@c$kqioyuc`zqB5P1JDS5)8`w%&M~&=NO7J*p7aja5 zEZ=aqZwF=X?pe)xsvjkj4ge-nI5c!a`ba2LZ_xiNH1U~$WCFTm#JHyh+jZqDR*xx` z>^kCt+cl=X<{zJg+GObK1p9}i=<%Bn+NVQ*bF4vzr~iPnvm9XKD7p*^^;720VM-Yj zC42?-L^^1?6CEZRdsGZ^xy<8|l@jM!jO#435}SF#AO7owS&T1E{7X(1Hax=>B) zD$1|@PM7`#4MHu?$C}8#fvAfFm2!Kii-x*Kpavx?$ah&uKr#Y3Or$Ja-d*0JVr1=T zIcXOIC>UE~7asKPkNqQ%dbOV}e*2{HU9=BSvxttO%N?(4gjpt@$w3^ha+QxGAPq^t1MQI-! zA;0go|ERuKs|>X;(l4uE7V%X(&m_)hr+Mrrxs}A8uk|u!uOT%ytf%zz9vnI&vM)bg zsVH;av^7NHHm(lrBg|QBHQx7jznkxCOYa$deHhS-bPQZJy4i?dQ|7)J+;08QY7#-K z@qrPyiNn%DvR#(n1KmTxdXJrxHPPhEAhnhrr|J>Ldbb1Xr%WEKI)F+&5CLU04~YN1 zPx~MqCIgshZc>cgE%Yt6KBL>Zob*KNXhtQbBNWW+T=i{L7W`TF#>COCe-Gg~ystkk z=VSIZ`A)5b1RvPA=77a^lgnM?uU-WH-Ii5GBX?nm+a%sKMF&WX4*%E4wEN=E3QW?R z@xG|6(zvY8T%h}xa;9ut8g?%XZF=Gd>;C0?8&bztj~Yrd$d~wJ1u|IgbyTVL{tue~ z6R_{g53Bd{2iF2knZD*juY4FVd(b$`L`uzC$NFEVc5s?a7kEGqyG8O~Z{CHeAKIpG z@U|o6+IE!^OceXBt)3pJ6A7h`@sG6{`>LGCPX?Q%~$)5LXFL#*HTyw7GP_ajoeJ{Wgl)b9PXcD)q7$@9^nhqnTM%Wn$pyL)qtC z#BC*PB*r|1#{I^-#audceDKzz2)`K>#J3(3WttWy}}NkE#2vOhRNBbsrXv zpI0#t-h(|Z>UiK1mBd_LBlvd?t4xjGIc*%4%RU%qA2D)Ey+zC{HMBOsmyOkhB%wEi7Lu|P`V z&n8lb6?qH9Of^pKBFU*~)qK-gwW>DDCQiXiAHU7^S`^~rbAQ*PO0k_Wm*o(1rK^b~ zN6}PFNg$&)D79tC`An+5@!ez#Kj3nAg}WAMigJZTaPb~gJuHll_gDId93B3bF;0H; z<$21jGqkNwG9I@Afv!XrLepDv;LjEf?y~5qdu1(tt2~R+ghBPb?)|ofrWFd>RV5p$ z6{nwsPVuY;Q7#9+^xyu~9N`a|z_;r6CimyD3f`u^N5xqzQS|EdIxJj`D^0te9lqSh zI>WMUFVME)17q7Ae|^~VGw@yY!>g>|C-*;9T;Agt{H67T{A~YF_D`uASVj>2JpT1k z`um0uG!ic&8J+Q<_Z-xY-u`SusJ_s4)tP(H)dXYxExBjopXW{X9sv)nyevyHydF{N zv-vIGH%fiuhe>w$s!CzkKYW=p=%)2wn4W4c_rRp~*sh&6OQ2n@b4&1#mg!OrD9*6( zh=rEH4Fh%Y?nH5Y(u0Y8=`8oLh=OzB@rk_&*SD=hcTz$U33e~;RHepj6AV1>Aq0#$ z&)K@RzHpK{SRg-V&|M%MnZvzU{c(CM>1}wAigA&v4&FOK*tT{sj8S8FnI>VjMhdl-H!!N-4 z8_oP&acu5D)7-rGot!h!_#RTnz~$oP+dtcwr5}Fg-#FQvpWBb?eEfLRzY{>S$6zx? ze_CIvB9+Y!$_8TvBVj;nLPB~vBk?l|Q6mL!O?WxzUaZOTi;57;K}uVxmOKeh)==oM zA);yW`#YkpX;RxaxpdCWNlDXZNL|2~Qy_`2-$SRp@XB9FiOZ}-5)4KPDAtSw_($tA zC`{dkKl(tqFh3pdIuRo8cx~E3(1tm(Z1XDpQ3puJ@8l@y1^h3KR@3HwVnLP<@l6Tp;6qdR^OooSx>H1MQts-es1qkuZ3e!0r zB-OS1o^%2OZQ4Eh){!3m2Hpg93+IU4SfhxG*NQf#Eek{*1$3KvOeV$6qac9gwS4cM zSa_N%cJhcQ4D`sUEdbNYn4a%35==}=Lb+5%-0xo3ofKA7Sc2d2Hs<3lQ2J;Q-f2-Z zTqwaR#qs%S_VUj2M@|iM!CZVa8OE*XaAssUv`0iMS|!31A#YwTlh`Zty&#>b6)Li< zJD1hlJh}K6$sF5*kO2LiH>!`*O6ghba#~1;C7NMZ4`B)B>^$5SA;4i0QhdN%!nv6S zO`8dhz>50N2FWKlARlwJ6Cz|y8vS>3IkX^7GRfi4r}Mb`;f{QLyx)u@Pt≥o<2q z>})6%n9Wv==yW@B?`o49p}%)&Y}7!hUoO_LS<=VqrgVa6)p19(0l~D0h=!u7_4U+G zPKiK_5d+;e@ZYFDTBDN%E7GIJU$c_g48AxnC{ut_PW4UcxE>$y&QhtUEDpf9v~IP1 zL*g)S5WWCe$8=IiCNC+*|n>LG&mdwfS>Yl>MmE(fUx zbF>l=FweLehTZ}oR}27T5qe9`HAb%biicEWr{p<%<%DpmkmI;c^IeI%<;|^X?&d!F zxe#75@j@w@eq)T3JEK zK9?ew5W&`Uog(Z}LFi;2#lc^M!aIKn#GtXB;9u8!UyxSQzMZ7BJ!@w_ByKP5_wg&m z-ZfdDvi$9}K6xdrzK1?h?(M3FMr0VALp~SL;q}Gj#*sn&Y;v@47ISMlcLm6$n)~?s zkG)C%454x&Wi>|weNI(sm@YMnB{4n|fGTmc>-HS|$9V`fRJ?nJ)Hb?ckbJNecz$qu z!8lscOXnLvCMKvzi`(QeMyC!Ut=YN-lL@&`kYP9 zY_7STwDm-q7&S>AQX&ZvwX03oz#dUiTxItSN^yktvJAD}q59o7AUA&0U3ZRCQ_K@+ zM5&KmbDX;VL#fe#${G7!$we7k!#Hc9FPJ2U(1;u8PSC`9^>9u`F|Z0eBn03AT4fB( zb6XK(pYZxxaxo;gkv)q?Hy))KS&P`%Z#!~~Q<_%DTKf8gjl&!)t$mj80}3P&^X<3x z`X(2UEA+=34v%=mVzk8w9^iQ9SR=SCQBhkm`5-kS5babT#ad1%y(hYD5RH;FFWzOI zDkFPMnVtxARcYQrR#BQ+te}r_u-lgqoDL5l#>-pdqr@oJ{(`S=O;Ylx8Jg7@v&l53 zM!QmqVKZPw%L=ji9H6a6mZ6;E0Q!F-lwce*<&IsxHZ$sB5nO)wS<_AG2j&)mqr0!` zoZ<6`7tUYbjbiK&j*=6w)A7$uDL9JNDiPqNiU>tV5KTVBvu2Yq;S)XR&_zr){z#JR zA7Q2ZgVk9>ED1!fp{)o%-50wTKeD@ijD3 z4b`+Cwbvvwz+f&yU}DsG;DbeCv(&U6D( zuud`!*_~_G1RfV=nuYsLQF`V+pHn{hN-bis$C0bxn*C9mQxqbjn7*vfmBs4Mq^jj@!{mC5IgWfD zd%a!1w;qG_@i2SD85NoDmOww;n9Xb@ccm?3udg|GH(SkugrIYII)oF~+I7EQ4t}4V zveP$w@V-jd3UdsV_RoZ5>H_~V>!;G@v-k66Ok)+(%B-RnCAnKWX}Ie5b%y#9?OPXN z+s~%lzu5EkTZK92ug{Kc^EICN*gne@wq{co77c5Se7knfB;A_%cjM_!9%*FFKRYjb z4DNIL1F;G~V>zYx_fN?-!pw8?co2#F!}{NAaurjBu8O^)^9f~QHR9u=5Bo9>WZf7% zp0M{BsS~{RHa7WstsuW_G>zKVFqx{_>uW3^F8x$fj-9%98V@UzTJ^~5M4b6C( z>b57=+$Lp68>d6Y_5OfEF>X|v`ighQdZbNT7}EaaB@+bw?#Uw^?pG;#xxe@0ncQFyS}BS_-^yYAJ@`6a??#^s1hVQu?5Kq9>VL0hTecZ?zjf~XRnA%5~I z`3|1a`C-k+U1*nm4nVyx^N=E3fYR->9p}4%bwGM8stmbP8*4jB;VOL15?y-Z|1M46 zGDxc}L00tOTm+_6mrTf4L}UJO*uR0uluq+0uu z$I%Dpf#DIX(d5bd9YD&?=;?JH5pEvr{Biig&qY~?mw~$`L(l7lUKAG}D8?5s%ofFV zj_6@if$m9VkmX0rSU39Y%>!-Xt3XRuoB4UiIY(q3V8({hZvZgBp4ll)I)a|MEvH&O ziju3w0bse*Bn@$`cGDxqC@E!AKN-8%4w&Rg?V@I1BjjQ81u(d=Bh#%D@b6Pk!F+fh zo%-Pd^L)qGH<}*8AYdqeYRo-pti+#C%N{M(hH{INT+7xqpN$_WsdYZ6%wwIX= zI-x}+!OjB-<yB|DqdnI1JY>tB(>g&SSD=l8AibznKS9}$4OD2cUT`IzjzXHq= zpMCY_2>_aY-!s zh8BQrs%K&`7O`XO`nd~v?_>vGTp+&AN&&9(@wh&$N{Bq`CeCMx1bKKo$~dDyIR=5(ye%blv`#!qfefcyZZO(J|tw}5UWSUM_DS6!QEn2>Gc zK5Bgr-!q+stb9_D(=Wfd@P>aehp0Yo_Am0H?<#UZH>WuQpw#8mjlx+AQ;;kh;P}xtp*Gdvn}~K=RV8p2-AAhb>m5ssx|Wkn zNY%H@%vRg5erBmqZJ&PKK>i=%pV3tmDT)fe?Y12Qv(j*Znex}KUSltx=M(Y87@Y?^`ZgHAolt{5S$?YsT&`2U%-|7e;Ip%=wpKke#6cHBS4?=?a zrKG-TrUoHQ_^!vyDbw6M({CY#OJND!Otbg;fa;RY-0X6S zWTE#6G25({S&+t7{7-6n?isv(R$g^y0Nv)n-~#BI-i(oLYYJl=5_db5sytq4Z-}-H z-g*pgvntr&OIUdC0LNNN>se=-I^lHgBP;)K*Nn$O#{iZv(LTrGOpJ~CpeXo~*BaAS z-{BFz=*IZ#ol%c^(#d=(KZSNoRd1B8H&AH`hMJ!0HqFJ7I&R>pR<|84W6b5vH)-v? zQu9pMIy`~JreBNNAzK`H?>OGY_leyfzz8!GZb5w?%?&zpJ7!*R`#V{|%OKc#Xv_bO zZq-wT538DbT0eeLNez{vrqG@5f%}Dl23M11+VjDF##yeRjI%?& zZECy!EZb=olrHuteERO5RgD&C=s?Nxj3@mBdZrkr4!*?l&l^c?E-)KTMWZxCr4 z+bXZUxBMTbvnar_L^P8W*p5Bi)`0%EggyXaHJYS){YGor<~MBn^6`@0ZMqdO18xqj zOnh_9)pEn3lSika>>s5*(LvTK^TI<^0Pv9pzHKdSh1=(o1G_$o?jG?~`%bL7hHcfm!kU zi(_`C?66|Scl{5!x$uLw@DE2rIt+?fw=CzZ*>m=_4!EY3!YCg}9Bv|!BXSNu!M+lR ziafKeQzg}Yp7z}vlORBKdTdjFLwpcm=Z2%7^hC86_6Dx8qWHur zS7QP8;0b_9bj&a#UiTaIu`;~;@tntiOna;1peXICQ`AbCA0cTM|M_o@5iSy((a@B&w;As^Ok@)cc-v4B-fv4Sb)Il< z`&rP#cWt_F$c-EUs{+0Mx~&`0ORMhDy|hlR1X1t<@}7PUYUAfNjgy~wbGrMt?T+jd zw!a*G^Glcve?Cu`XjJ=^3-Ax8lJ*q#r$xG_-@ar1#JO>esvKn1(1O>I3mWjU!R-8_>9P*R{Z!`@(3Bhgy=H*{Ijow}L*e^@{wf~O} znqrg(6s_VvxP(Xx4v#*1R)6DuKNI+-=^gJ6GWmkU{Znd zU+Z=ry)OE#`gZoCm8Hv7RknC-)Na+RCD zOV^GStg`knDBq3m_Pin51Z|7BqT80|=`W?mAYD8{4~JNx=IT;7sKBi=I|FY}LGYL+-41M4eMRECTyUiCl+NP1!* zjg;%O@6!&MVRUa*aI@||)TshUM7?Gg-&OW#ni0Ovi(Y(4AB(ui>-buc@$%BVOYgY# z@a1?%&AELW@XNB4t@=3q4?oI~RblGqKaJ?c=@-(hhENcQQ2U3H9K7CgN0(0!tOpeR zFOI6*a$%NcUU=_H)G(TUwCf(=GR!XFxSswOTYo3fr#s|VhxV?gbsxnF)3ZMwnZHqy zVt<`fTHMyEFJENFHA_OIWi07x-z^|xcVz|(q+A7cJlT5;m5Ocz7k0farM^+|v9_RG3w5r1`< ze03Sk++-c2LVyjQ4eHDj>$6m#XP!~Kr4K5K_wD#2@@9(1`#mQX#!P0HyPFhE4fmam zPea{$cnF3f?#yp5ZdHr&V^>}L%5G<^>Fu2Ldh*Kr^OTBb+_ptgw3$Ade9k-NS*r7F zftNl#;nTUA?8!|OTvsVznSIo~SX9$y?EG8F@2zg*(qA{XER=Y}-0C~=zn7xx^{6<5 z8$5=7;bUCo-4(q%@4ytB*Kmz9Ka}!R)iH8EUY`Bx>owqx8F$XwAJ&7uZt66 zOpWSFtaIh96JNB8^^DmO{L9>-Vzh$!b$Cws0fY&);TLFrlgLcgwP)d9GUOq|pbQ35 zHi*=g(oTj+CO$!r%i`MihMb+cqqEb+F|)r6HGmD)^r=)YZ^%cdIxBy9A{J*Wk=b|; zHaFV?p9#2*3+JeQp*rem@Tv40D1;7XaZD0;fDB{lRcXCTlvmgz$ZYzyIGKHzV02Ks z%>O}&zPqI$l`p8z$y1>OFGrV;F3rAKm{UGVHy@On3vk2h|gwtVV>*u{- zyOGlG+t1~$({>Dr*-mdlAcfiYAw#&+L=YjW9heAJ4Ghpf23$_zBMJlm@j=Yrz9_k3 z;-^=W*7QHVzmn<#*IS&3?uKm4Z>(fOka!s^WX7{)w| z#IZbhFi0trKO^;w+7!bJvW9G&eG@;MVY59{q<@DxP_o1C5m^QiITN5?s7+=CNBipD zSw*%7z*W%d<0}Gwx4#T1{Cd4deEta4h>K(A@RIN}m(S-6bcAxfntq+?L44ySK)Uvg z62Ht`G|(`CHHbn683RwG^z9cfoNY-Nd6(x#An;cJ6tOD0D4(It9yp)lKrJhzH(V_n zgI14sP7v0{7pe+Y@kgz2N19;;G>cw(vCLY zJ$oye+5hW&eY=ipw;)xmgf~bajducET>XZRDE%_BJIO%n%#4oqXp#tHr@rj29D^UN z^4|GK=(THY%;kK>fV@&$ncmk3f) zj=GKmGOX$39KJ-9qUse zAl|N42tfKdh}0_f1$_02=Zk3>KDvS9)~W@Q#Xl$>z|wIHnd3%c%w*Z(uTR!v9q*J) zPc_`}h%HzrRKxKxPUc;pvKpsthgeGIO+!*@C5&DAlSqpsXH$tWTG{-ew}7`ukHH5? zi%_0JzTI!RC&W4j%2h+Zr%Y{Wumq5NS#oIfT~DEnx;Uc?!gGe0-(acbVt)u zIhxG|SI{>zML>=u%w~4OqFv5$)k;2<#oqEg_^XamEksb{L9SIBQ23m4I!@D4eQ!SC zSw3qaiKP)*%4@a0O0sDZ9b5WctxGdkpYgI;+ zBBbrKivVQSCsVxA(=dKj0$8gf%5Fl^!00)S+5p>Ve_8d38JULeQQg0z?sZK3{%B3< z6lBINA(+Z(+qb@9M0}a}U7}o1ktZeo2>>4R=KimyUI9cR1DzD>9@AHUNlp z>Xa#r$2}m`B7jyVS1CX$qL#@~dO~i{vstlvWrq8!>Sv~FBEqzN@J^nqQG}__T8*<9 zql`3^KHj>Cnu4@MROeGxCKZ&gGSH{D!t}5e7;<~^%J;1s2+H_r`s8>xFM zCrI^7B7<<`f@2DdSoawovSDDp_WZL;rB_%WUmo_}+$esS+#)v~R$ z^ViAwj#7ci)UDs9QN6?jg?O)?lC@ErL%o)&XZbjH4_*jIe+WP|Np$w> zYe-bxtq(N3DQGW!>3#C{PUgLAWe>yV)9+s?6M5nTjxf43O@wzy6$NS`$HpeFIN4m@ zUORMi3+eflfCRVC1Y80!l|A?nBXD+Vt2gvc1!NnSv?>CozPa1OKklfV(rxmLbj%Fd z!yspC@PX6juxg&Vs_}vZF47v6E$Qih%dbHt=2`~eHfm&~nP?bsoc?+$U9z4y#X2gN z6st$bH&O<#_EX+)w_5T4{1<>jA5mpkX$J5>YZOkgh9No`h03gnyy1s~wJ4+T3R)Wg zCHKBz_%lvQ3v0Ba;oIX;cfPVldKV9`hfQjfw_$A!q<%ptr7_BZ17?0eX`!u=?2asXFG$OeFURoyJQ}EcSujreJ zo2TKrSBPfDS2QE*5n~2)%o=o7!hu4y<{SirfUzuOgJcA3kP1Adt2q_eK3G8lkWvYR zEZ|TZ3S_8g=$7EG4`LHeZho%}s+R=vLUCIMuh)j>3u~^#%>=a7(03@#*Gl~}QT-AR z=LkH(TIDuS_!(xZ1yUUOx z<|OoIgD{z2yHwF2_&Lg9-8Vy=d;8Ot6q5UW) literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/html/images/note.gif b/src/SDL2/external/tiff-4.0.3/html/images/note.gif new file mode 100644 index 0000000000000000000000000000000000000000..7177d68a19ff69dadbbc166fe9386fdff45bcba4 GIT binary patch literal 264 zcmZ?wbh9u|RA5kG_{`4$1Px%^0Hzv%yao_BaNxjyp!k1=|6mG816e?z0~7@6RA69c z*(-3;b2Y2P?X%hj3LGU%#OEbPGM&?0HAPI?FIHNU$EI7SR^tZCh6lDalJnP{c%tfj zYU;+Dhqo43+$}k^sVh!<)yD3_4u_+kJ(tRQYGGX{n6Z1R^~WzaRIPXx*%w87O4c#g zi#Ihf)b)0VS9LKk_w^f2oH1qAG{df$ZF3rD%yV7H;j(yTyQSokmE3bG*LAIyTfZvb ynPYR+R%wYnAx)@c*dw)d`I6$C1UaA#rTRf8E zDkT`!FHN~DBH1n&K-QuKYyljvxlno9fFh*r!ibWZwU?Rv#8OdNRtXFW2dRpr%TNr>?whe+*$}9L=Iz_BF#F~u`&X=9$9mT~mW5ZL zKtGKdyJcGfvWW_N`(EaY_i~>Zd@L|24^=01hw+-!z6^sq3!1`d24^fF|(d z1H2ZSB%-Xc8t0v-{yqxovd=m@=%b-Sxo9@8~{|IHm40|iAreP)uB7_m+ zcVU+SLuqKd9OF4Bkw2=Sls49lY*Wc5>x6R3EGxCLF)z0)^HDDGaltF=nPW&~k;Nn_ z2rLCH^w25+$HF)t5v?>T5>PM;W$dh{YA{Pn#L?1MAM^qMxQNsVNtm3p^w?x~(sT~R z^n-H>Q1cv_&Kgo($<-}}G?6k_Y=j9Hme4IpNDfH=(IpZ=ll0$gL?Z%9VawC_J7q^M zIVER5tu`S3|41E(q}nw%`R6Ku9S`K7mrk@R`@}TLEx3Ttx^ z?!5Qz`|rR9FZ}St7jOLUoJE%WT8p8D-4(BGCej`}JM)?|bh&bl+o(xzm}T3u*8NM?1*bLk6SK23^3cMX-xT2t)V+>oms$L|TN8 zx>KGa4QYlz5>Jt&)`9kDYC}HM6qR~Nr8|LX0bc@B5+g>425|sQWkOIC!^MF&xyeEm z>XiP(phdw6dXY{hd{?Zv=koO=tXON5rPlG)d7sLNMn?%i1b2L3iPAM2Q<=>vcS?I9oQ;BdaP0qB#0P2 z3Cd8Nt6|?7r3!{f9z~*Z02PuXC$HrwTWyk)5d_qsHl?qAbu5n>f{%VchDvW?vP_FW zzyc5u!~+yFVGlc_y>RKrY0@hJzpQ2&t*NU07@z_ADuAvApeX~ai#zLT*Z?e%laA&0EaiEL*J+S;w0tF(~A>3!({wkBUN=FLS zX{&Xn^ASTBqbzsbgy<|GHrsml6itIg+H&hyTZmP%=rw|ROK<|uUBYi-mB2ijpb)uH zf^Ty>Tzml#xM!SoxgII3U%mE;?sC_0-%T(lL_6N7Wsa(6VT@3CXkWt#SQ&uBTU>H6 zfeJGKzXQJTewp!*?3!q~+eq3vwjo#knz$0%H3@=O783&=iB9(&3;z%p8HJx=Qit(&xSVhYJ$2v z|Apo+@$;TsJ?rS3E@mRod#V0_$`(x5l&K^gDqx}~RMg2Pe*5$6jbRXKkd{=ZONBM8 zRV}}b9;2zME?-hx8teZ}V+Vg#OrvKCi1z7v*7fTP6@H4oX1AJqvuXB7>$g&9$Mo7q zNHMe1M_5sdG}w_oDn|2=X`vdsc~lTL8DbT8PcyW`7wDKjMK9wMYRJ@B-)Z!NT#BfSs`X4nChaPOS zfneasy*M&CS&K9BP*`^yBo}!uBr%MFn>PhZasZONQzZVK|0q2@?>WefgrA2h080<0 z=##GWLns;Xh!KT)L>Hu>11VrkQk0?xu9!tN!I4dDVxYZ2lpEp*XG9<$xXe=kkL=Va zb`G#c1>W9+8XN1jkQYCTbbRTW1pgHD%uEV*BaV=>HUaz0errzVJ*xM5Hc@h+Z z8b~1rbZYFM*XGzw4|-*FeBP=$e!_1bZ{&}W_@pF$@S)Fo?bIPFRlz=0uA+UbETQ{Y z>5BND(tYiNpAP3Azxv6K2JOg*-p;4fgQ94F2mZC|i($v6@{^Bo_&0o75+qgF@<+D^ zCzz5k8RJf@mv2ub01twI2CyIZSA7T6ET1%h`nGWwh%F!Qn>6f<=R2Pp7Vg~sv# z=0qj@1bB|fE9<08iuioal0YdCOY^Y+{%ayfdYFXw(s5k~PVVkZj_3j;P!f*GvQ;mj^ zk#Tpr)@=6EKGoAxsism&MQRJ#JsXu#%2Sa)Wm7}&SF!dzqh@X7<20l7ejtYeJ@aFB zgb5!-RaHfD7_kg@RX8vPJwQ4B0YI}1nZRL(Kn?=N5$ClzK!XZK>600D4JoDz^;LF5 zunS4^laP=NFNS5xa5l7)0XX>qkR=xDRSYkXImDF(HxeVt&{vjVmw8E-*Pxef#RGRa zI57g4s^FJCX_$ez1TYo^hm)8tV3x$CWq{^^n^RS^5n*`oJmleFklC45nFK4KkPG3N zsqj`Bkd`{8Lb>1>7MV6AM4GT!n6mI&Wf_}383m}x4l~yxD3q9Y`I~q-a<(}+R#u$D zNo7g)dVS!5wPOhNhyl*Y2hl+`74Q}|qBKi^H)`PoQ&3>VX=TT`SyNL-Q;aOC}ly5}=mT;Ao5TN@r zpbgOkeC1cnBbs@T2FvCIr(k47He>f$IyWE#TZS3$CkxIQVU?vC8zyk?rC%8a8r+GL zgOeR&F`Y;=niwWH-Ox0>;dUoxp?csA`9-7i$v8Bpp&R-+<4FNqmYU5mn-+-{6ULS) zdSM`8qb;HlRe7KQW?>ysqx^NFV(??k90gyUNww8}2 z5R^p%bj3NCrKOaRmBnTjoQa@fdJ%%-1|?9IVH#j#x*9EZrbB9<8S1EP8aYRbW4a}$ z#37=d0XHCLV*bORl-Kncgc<;HhY=Bxr8JifpV|h~P?me}lB=m=Y#>%?BM6o!YA95m8I~-O!dhB?$F*{XBtFRwT%L{JchPVn}TE8wq8_UyfvG^QJJ%8x4o6OrS-AA(4WR36XsA_CRDe+g7n2r}At{n=;c1$tlDF%pNdr zgTDfC83K8F9C>6ib_l|8j}jqfSjL15Dy>BX8xU5*F(PHRb{^1nA8aB#7%%>U!i3V2 z$Q;9uUDPjVw1yla$`|-`ab$aDJWVzj$fOA1-h1*diIV3~lGyv)G9XYfu?PNwnq%q9YPSTVg|KWH?R3MdCag}F)ZXzM3 zta)#Akg2?+#=%3a)j}gja{jhf?&r>BH$rurdc7P9wNN7{gmz+E9y7EEJH&J1QA0q2 zB;c_mJoHfQVF8C{F4J62E@;hB=Xiz?AaF8ylou{qmxHtzM_nh*;2cMP97=W50WPP{ z@Nv&-XLBDg4hCn*qX)?_C(Epi4Uvq3NK(u~0z*5ra~eW;@^W|^(*90xa(Eg7CIiAH zM_q`KcP6_xMHbzOv7~ueG$9%nfANC4#_&ORmpLsU9eBew$pACSfxa!29Jc^nVQmA? zx>n#CLet52MPg6|9oIlo3rq5MKF1^;fY4x=h5W)El2}e~V${A;*#BY0Sm)FhEz03c z)uH&!d3eVdc*(@kx>lTznyzt*CuZS(!PgB#SNYE=*8viae;Y-(TK?( zvH%)`%F#_J7e^_>-N~I)hE8~fU`*MPoq?`W#>*|ml4Rat{`|!u&3o+)gX;a=C}_vz z?A^>wdb`k$`JJ`ssNd+w3;K=OQ5N7$R^Z{d-vEB#k&EEHVBk*HWK2uo2maqs2H^?5 z-xl8B0&d~{EshH=;GiA3ORM1u9^eY@;h+t-uMjgc)8a1v;xHcLGCt$#z&22L-wI^N z*R99FGBEgtX08p;Qe4>H~vrdd2eG-MM(*pezUI8-e!jXuz?6H*4(wIaVX{Zq z#6%XOA-Cus?ja$zqVV_L+!&9F5x-A@Js_>99|GX#KQu9GQYM_I0A}xv%*^&k5>F5n zCS8IdU_X0Gt%BZU?S39h6h-FWt>#ycC)AjV3iFNuLnNopD*_{n5N+oPcuJ5z`w7GI zwE%S~5HN^njJc99T|Ob}A^No>{GNx}rN7d=f=M)gFbRP6&d(ibUoN^>higy!*3W{L zG)}{!A1@zKC5TB+vi!xgNWy~li~gh@pijin0gJ%F9em6kfdJbW^4jOZ{?#8&dWo3K za3hYn|BIO-5K!b~)iP=4=G}iV6vt8HFp43F0=v8`Cfm4bvkjf$yI^4*=eJ=6ISynJ ziEuEJ2&nQYZ6Xy-rc;@%M!i&RQ=!O0&1ZC4y*^*DY^_+|SeC*4$Z7*artw<;-8!<6`8?Och>q1M21e&zI^)FC9L#7f&+x{+5tGokKns_5&I!j zI15@vcNYCAl=u&0K8X|ASz)LTL4k@O7otpwttGp449mSUhpk-6k_Bxt{I~PsQGF*9 vb~9CzlEVTBlHxm6b7{wmKqVSgS=DRDPA#hv6^oQ=yR6xK;p2L?QUm}ynrck% literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/html/images/quad.jpg b/src/SDL2/external/tiff-4.0.3/html/images/quad.jpg new file mode 100644 index 0000000000000000000000000000000000000000..4b7df170beb5da5b9be8b5d00efe19c9d9f4435c GIT binary patch literal 23904 zcmbq)cTiK$`)(|VG?CuPM`_Zf7lC{%^b+aPMWjZ03lNCXJJJ;?BE3uRAcP_yARR(Y z5Rjfw10><*`}^Iwcjo?e=iZY!XJ+T@?(DN?ci;DY-Y3`d*K2_LT56hVfEzaefE%PA z;Cd18oK*V%yZ+P3|6dQJ*4IA(baw$C0Y7ftcnG*jcjFe_jq5%DkTg!R|Lz;`Kd&1% zZ`~%lLw=Wnl8RKJ@jl?@ja#>F-o8afcKbG|b};EZ;5Ho@{R4@ocNp|-$sc+$N`6Sr zzsvKiwui}J0>dly#w(P9l9`2-jh&BQ;E|w^w2Z8ryn^EM7piLN8k$;$M#d(luguKt z-r74jIyt*|`}q3#LjwZC!XqN1qGMuHQq$5iGCzIJ`c_a_R9sS8R$f=%(Ad=6(%ROG z=<6RC{5do{IW;{qJ2$_8M4{LJY;11*-QK|-9iN<@o#QSp|AXrW;MV_|vi}D5f8e4c z;ktSI_O09G|G{RUHRAMX|&00g)OfG!_>drv7Cl0A{=nS8qc zFNLajwZg4V*6p9;@Ta)nH}$oX3<>a|0{k&C@V`oWaLT)bu#;6zGZX?OWw6?L|z80nIT-K?al4S+O*wJl)HyFh~S-&+EVq~iMSg~7`k zs*L}ATd9Y3JgC84^>=Y%z!41>r(im0h1t{z7kBTnzosX=Y-teU_F4YbI_*CJ#mO0u z9+>f`PxAU(zYR?MdOn~`zPs8O(sm8#c^txIzTL&sg*!*f7l;>s>86F=TQMGqyNaF_ z_3xufJrZrKtSU77ND(0B%YUI1on@1cdY8*~5R|!bx)Vgrr-jW`?A+h;Fv`k(=-kQJ zndKRAp8YK`o12#I)0@)Q-_te>>0-**jq({6y)rGtk~N1e_(Qy5emK!}@WLUwCa#Mf zdO0JCS4Ro|t=h<4(s<`KYsY zMw0Me23oqT05HTDR8q{uQ*O8F4yH=hLJYA>>AOw=qHW`3*1xpp^E=-O|F%cc+vnE+ zDG-&weV8i7GJOA5pSiijZR)~I{eiWNpB(9*IL~Bu-~L9~;G$ctC>CW=iZHYH1#$U` zlLmeEK%{g?eRz#|e7?NiD^o?OGQF3X_>QnRmldAAak_MqK7%|yn+o)|@@L~IowUwc zZgP5Z5wB!Z;})!yY1?4HE3uGq_6C=%t!Sd8$Q9-qu%O=avXA^0hufYT=l9nE;_-GL zR(EKrh`pd%hbjo8KMCEwz*%uZn5BiwDh)m8@fIX5KuLOwQe!xvPj>3~-il0t-WmHB zF^@={umf=Zxl)MP$>l0)=E};_{Og;iKFf(qC+lV7+&|80PS)d*WMQyNB>=_{mQUt)IOfWl45zBEaeUlSx6XSgsU8Y}SKsT1b{ADXPtzaaw z*C0iAnRlZpM}OC*(I0;wzDAmU8=OE%49E=_c@5xHd4!94IjO{ls$p5cQT2y#V9G6q z>?(2Hs+eWGTwrk$ucYvHlX?1V(bjV+VM4N<1mI87*5X>!4>&vC4=Z;@8}Ti4a$x3L zFr?2sDLYFq$(`r1p;SL-ilx=BvVZDpKj<{yi}HR>sjFo3m*)z+9oBaZ!2IhTE5UkD zaz(p$jOG~qj-O1zslxOw%YW((KAdGJiYehxTa^EEQLr(0p+iXYsQ^;I1Tf{uff&!~ zUf9zzt#}0P4li(WWW#4R>iO;f&VPVB=R7aUXrci=rSq*xei{}I83e^9nRgA3{9N$t9 z^;n|Hz&HExg5!M$qsONedU~e<&qa%(idWnB`PU7!(Ou)A*MPOuRmxLkNqOJy7@~Bh zNrnt*lp3XJtgdnNR?cn~`EJD*K4sqTd6ilWdyW|l zJ^ATd!;DMPz|4NE?{T@zZ7#KNZhE-sG4LpNXCEEIn>ms?Vzt{&{kV@hun^ebxYvw6 zq}7f)KGOb7m>^C zk;j4A&=K>^T02rYYN9muV9VeEYEu`)8ZDJx1v2dnh3F$k>{9zC`}3YWkQ6gi!byIc;4QW zpt=T_!|TrX7)Z0)JL99xsKSZ!ULRH6pKy0qvcL)$O#6QRa(7bGyRbW^QdETZ=SA1x zx9y#;b^B}{@DydW;Z+2X;n0UbrQh7$^jpbQCO5gU%dN+S!ZX z>Z32H8{(*_xc{_fo}k^MHg4T|C2MEvEg*DWGc#gc2T~#eLne&!hZKU;*%XAmt^uOs2u?5%J7$ci zU+>rrw~M+QRd_CV=8KU>&c8D#F^7J7RzxwUDPL~zD#>xUhSjQ7SsW)kzDK^67qQB& z!Uh4=fx=JPlWxIYVB%iwa#LgYF6Lg7CKRs>`zQCzL%e2V%I6xu;B=XhDpP{2W>)a! zlCt=0W%42c&J^+h2O{1VXK}Hn&DvXbQKWP}V?U}>i_*hN2fF5CRboCBW(jtGhy9Dp zh!sPpqdJ&x9z5jv{4X&@g%an$5mb7r3>J4SMu-vyP`ytb8J4sL0r3}}&CBDg7hb{_ z#n{{m*>3b9!>;#Fhdk4{MprH8Pa8!UXJ?QYUfxqjXDaSLsWwT_^%RVlex6n{#rjr4 zzr&}jmJVz7bZQj_(UH>L`{B;Ek54$WgFDT%+_PZG@d37Em3b#6@!V7%*MKm*c#mf< zR?Mz%VKW5l)j!v7TWb3l2jjQV3MI@4c~_bER?PPGPnQ|g$Hp7k-Cj&3EM5aby+VHF zVZf_gP?p{1 zm0l!d9*K_8h4hem$s--6Pp$#>qT**N(_Mlg!(G(4fPC1$I5--3Z?`R>=0oGztPF@5 zCuh)ZL%YlD*JQJ(__-rkY~5%I|FmsI#;JiIZt#)$hZa7KkP8#K%=`f)U)ALxo*QB% z8vWD^&zu_DqnlssY51}TddR7jhyIIA7fT#J1-^#~L(e^4m^HcUe|)?ebgOwc(aZZU zyvE~#HWa42c1Sbv>RnQ#w~{}F{j@hs56J&xZU7`eVOe+u~>$qF3I7Dvs|db&rq9Iy=^YmG;Fy%T%bsWZZ$ zC@m3C-}_81oP8@lDnpLL*mhgGh@JISdCFNjj{t~en~76AqC-2|BZdQSh>QBVts;VR5kocDM6ZywwNLwK3m$A7?Teo7ay=W-o0aB>$sVL1@_l>xHdC^w zv8l{kupjQ22LP?Lz-w)y8{(dTW3%Lvh;+CJ+Zge0aGKF|_j>^-+N>tUn#dQIeOPyn zm&;JMU;A%Glk!GRgM-ed32|`OeRWg9=MJf2Xw*O!u&;(1TB0`X3!;a<`kTu(Eo!RX zk!5k$^%N3)+A8Me`XCpLH1la^ZpwIMtzfWr11QdEZ^ms>iv!`JvQ-fyq6H>}$2IQJ z{cHJp@o$#{=VKd%USp+^Nz&<*$z`s#9PRAE+<19xYF{AqmmE7rEg;RLB%&&sIA4%? zwDHPO@1AEV_I}#;mU!8?&jyvdif-8R%A{kJLA{GT#cMz+vMq=9N0%&CNsdK@1LGg7 z^wiZwqb={nZy8q;sy8g2#~ZZ`IS+dAs~z?i0ZOL3QFw;)GY1@bz?BtrSw(>m)t5(2 zWX79L!zhZk72DN(L=A{s-o|xPr#AGV&n%ryK5n0(Ez|{_mCi$hny*B&GtNOX;8>8$ zYD9PaT+C`umn5zpGrk52-FHkJL9Il#6-S|f_r_5(p$mHgQwIH_dv?vq0)(wkZxY#3 zc6jeLO}@irw?|@py^w6xkS|js9`kKXp7QeLk~K=ILdIP+{CUzmY(ctTTepS|hb7|T z;Ne*EIFAt}tr}E@=|^y*;6zX`3a;WG!gt`!+@H<=?dmz*8m~c)>wE zM*GZ}bS{QE|K84{!_#2G)(^uPgZMwF2yV}{-Nnkr+)^`8=n%!K_a4ZcPJcU^)plhU z)k0IHH}j)s9z;|>Ao76Lihc{Vn3DTD9%37(ANrXLh0}=W>vVP~O{2;|#%m%J$Qz9y4>Gl}4;r1PPc+6koUm zN$)LfH!ZQRjP6$tp4hw5j{WtR<%o6EO4n(s&!;@jH$^J(S*jA^A!=Im`laY~Hm}93 zVNEL=6r2L*b=;r(aI!<$t`C_$`Rr&dt-0x?eOp^<$-%yBK?ds5-tHgoSV9vHg6`z$ z4b%%mfoa3*Cr*T)1S|I5=JEU4nu30Fch%cpB4cyM1TdmhH~d42llTnAg-ia1m%wr& z$J*CiL4zj#vfn0kWv^b%`aEZJFiv?+a~9+2?p3TC&Ba>RVoZL^!+jba*^PPWKA(q} z_@M;3qF#ouP&ABs7sB3Rb#643CuJbfDwRJ{bbkvKdgys$JM{aPToED59?f?)m!7k? z__CRdcrI{ryEZJ9l{%Oe->FX0_Co57%6Vc~VibT;mimN>K5K4l4XdrwWYSE9M@Ngf zN8z8=^5d6d@=?P5ie*JiLs2Pp=X_$0?)wZst^w3a!r1mRhe;*6buLkvBnp@+PP^DC z@E}j_&X(33UW%-0vYMc1&%<*|_L;5}p#^9E5~}gK7^!}K zXEzu*_7*r!W5yx+U*A|z?-~$) zB0X(rJW<)mVIfZAgfWwi3KA3_z_o zr(;Z9sojJU-Q&h2*(ZmOMMO4i#7i;rusOPz3Th+H@98G&>Dor=>~$_VZ1qQO#*BYVKJFY_769 zUSwSSZk~VfUYcAnr-Q6KG91abTg-UUl--P$)Xq)DKlag zLp|i|X&1z1H-ylc6%P#nxKPjB0r~*@G5NOdFc}Y zVE;xl4~K`h%?#cGT@%l`$NSgTOJtxE?0|BCWfxS>;WTx)gv8^>9)k zKI_rO%cqj3pgme#7kO9+DmABsp8BO?BJO>K(Rzv6t<+w9K)_?Bs9#9_=w=J_Ax;#uAK{D=XT>w&G}pH~6s}~Ub3K=X z;lA*2YXM9W;*jp&Ga~<#TcwhAurt~WCZ=RlWaW|&Ko z;yFwI!tuDI3zXVgn91T+*ucbQ&HGW5DNSUAk`*N;G^^L7ABA)?!qV4+af^eLOQ3;l z&p!F3divV=yPkt|j;$st*?jE2-xm^}>`Dt6CK$74H`*H1Wec!MUsyGm5I;92-Tez< zRw6@-N3HN#U4mnLhTgqRyX{D&W z^--^W*KEW}#+B}L$h_LINySXI#$zuRaVmk(>&>~$S!$pp2 zX^(v$ONMzD8I&~na%q_8=Wv_52`ZNBdh@gsvhd{Meei^904+@ZerF0Ublhwt>0~t<6hY=zvhF4(==1|j_SaM{ttr{KFZ1%MgN-q!-Xg7j*&!i z*wd~#Jh%`HFM*iTtVXTs*Q$Qe{~a>t>-fZldG?T3P*D>31yb4 z3k~+Om&7y*D+3X;<}@3BWG{;bn#*^jkn^vclNW{_bhLG}hOXSD>PQ**T6YbQ0X5g` zwU-lzZJKNbRu?vT2qnch|H1Pr5?!X>1U-0&rF{?67uwCEJ=J#JUx5T=c4B5rii$=S zwWS412mRer6e1Er(n2Od4d7mF_(B0XFA^q$<>|egi^HoIIA1cSe{)u>^qo&y7FQOG(Kt7~u`s#(AUmKr}=S z+%42ayt*eUiDrJ$MMKiF%9>?HW)u12@v%(B;)QJT(V<}Wy2J1?vtESa$1?8ZbcJD2Q8p~-xyU#}GOBDmPD0u%exUkc zwXj5@N~efqB!8#oT=m7ynDkO`;f8asWlCZha&VZ${+YQiAo@VmF#9WIn9s*iUlJ#Y zBu7~tZD)o!=G@6c!y|Jaw*OXon(r}s<{zgutt4J40{-4I%j-1LQRa6+3c6|U_h7Zx z2BTc7is^TWWc6{qm;0ZBk5yfrj;g}~qs=~KL4}8%knsdI-_~kltMIzP}p+Q!r~`? z1a2w(J>*>P_AluAKd4{r42H4=DgsbVy=vk4+1|-2YF+i%g75)@%?g7YOJ%{SUehWT zmB0q>2L>hkT$J!nxb8>tk+pu`OH~MtV~)FZEU1uf~Kzg za<4%N-&p=(NS$-;{SLXfPnKM3!Lvy9d?o(_@V1SXKtC;A$Z+00nZrbDuG~2=);;oF zVFShz8Cx5H*RSpoOR|0Vj5mI{Gu}T_v1H-ZCr54OMAX}6XC~6dmhQ$qVoBU{RY!Jl z!IV2^k{M}U^j9H&96h)OScv7_DXINDxS~=0Aj$KWOI$cm7XOCul_-Gs>S}Jmj7#g?#rO67SOh6)LQpFZ;>eRALt!Ve%rJ+ zUTsVU2}=BTpyl+45f-6pJ!38=0fTf!kMrV!fM>t9Rqn!qXH+@cer|= zB{9mo%jvU!&I(wcd*J`tv0c-xnr2!LvF{1yU*F=rmshO9gu4ca$De5Ud=aO^1)&8Z z(wX2WPV5WjKuldTX&rwXFLo*SrD7$&`6PhJHA>X2<;^G#KC~8M^mikLgc%~+VyeMm{oqZW^$9thqkip+26e+1*$-5+>$D`!( zXuHU9KF+31Av}{lIk$Q*S;9^saYGNFjr(fIgB#6#CYra9+jC8(kHLJMeN6_>{Zj5$ zU?FE1!dLLV=#?6@0u9Bgb)#_yd(xs0x!kQ<+do>u?Y2G4NzVnV`_jSpSExR}YuI&i zbv@TqK3sU6b@sOA(V^7VWx=E^9goeksCc4o@> zD1A^&l_d(AYJx6{8u&L7X@v!h8-g;d{lcx9?Yt>7O(&Xezjmy{9hId9I|Jti!J#24 zgdCzEG!I4FH!6N5(7(d$DyH3H_zPk&`owyof#gBs;AT_BBsybDdrq3hLU-n5F_k{x z%=G(DebzMVAXH5l3VRJmgvqS!=D5ruGA_?bXc7k6gKnSuA&u*WHI@G~HO*)FMl$-* z@$jD^6L?*8VxL90q_0OtC}?%;luHz5cI~u!3HcG-;C{;|3ZAULWI4z!faXQtKf#oB ztjvGM?^@7mWtWc?K2Vb?Gnq#JDbQocJ`1cV@KjQ+S!S6fRoZfQCl{;+{@+-F&?jtUg_#Ir>0P>r&3a~b)J%jAen-_j(SlUj}Ux(4Cgg`g%V~M*T zaza0$V5_tPbk~4zMfqQ<_VF1v);1!_sNeMWsJ3zUcq@QcY;I*V>&-fzh|!Ausy!On zemPP*&h~lO2eaVweTLcYG}d=3vLd1)OmnsiZDDY3l zH|=i5?WXexrmk_Os{THq!E#Lx9aX=RrH?-;{(6SOY|!MrAZEPM+b_mV+BuTW)E+Jw zA`T6XoO@~MnxcPfhk1W~8Q70#lDC;ShSRo;Jp55PBK=ch-jXS;#A<-aPE|Sgfqssr z?djAxwxs$?o_#LPY7j4%DYB@Df{l=69t{{vNJc3BMhuwfLyMxyOrRD`nO85IclKL1 z8aht@(w1BhgCUD>N7}F|?A5wEVmzFxW&vtPWJvJ!DX6j$_`+4rS2enqyto+i@XDbm zfUDruHnWP4aB%t30#X_yGGIh-z@=WX;+b)pjBR>fP-VW5xW^Nk<&g6^)6CQkJBZfA zz}cBTi)U-f6XRFs_q)YMY~(UuTiZn^a?8i7a19lWN2e7q1-&a^lY>;pO<&bes3ci> zuHQ4wbzB13Jo@pr17yznF64<+{}=-_E3LD`35971G_II-Ni|5t3LzHZ>xSKbv|L8 zagmzzbqRT`F&S=lkGLw`m2{1nBxS*#b~*NsGtRzM<3Ht7`T9I&gFj)2vQ3QB>iV26T~bSvLx-OkQ$YSo7jL4pQv`q=Fe@T?MATVzwfb z+}FBqSXo$Fv7TBG>;{nHi870V(j#Dzs+ru+j%yYhGnY#M{&S`NzK}d=7+0}=Z&W?;n4~NU%97M0` zh80*m?o+4uP-Mswn`8fs@zFD5q2c;?$G!Et#Y?UBY|52)*zRP zf>Wv1s}JqSF8v@fEZg4N*G0aU5xqTjl&a}fKjKvLH?OA~;|kyZjE3JsRJZ`?La1@x zCb@S$`*2jOGVjn(UA!J7n=L89IcTdU7Y;u$ull3$#p>X{L4xPh4du=7U+JC%OsSSY&TeN1Of#wp7~=Swn(2O#CwI`Gxv4E?j>l_=KK;~#qv>ESJBFB#uDS1Q%{_^7u4xSV`>txnINBur`%w#LrH6W#^OtX`9JLRO zvIxyMV-(kuUUv5=yiAd5oHG0D%Dm1?;pHXTtOMdZ4~LFcXE*!BqcXVY&4JodV#_5D z)QZ^b87UlptRvU(6DkBWD=hClsSP;Q&|G^|#5W=nW;!r!UL+m=j;w>5an*B!C%D>>A7#GI-Zt{wYy5UM}q%o zqh4GC9B}DtWg5Lnbk4QkcaOjxA6qyR{WLsN<4} zF-qiEmbI<~6o`IXO4fE-I@qzdsmWg>C7*`+XB|bA+Z$V%#$O&w&xS;t5O|WT#3gSb zs6Ve3xSz8QTG;L1_w@F}9HP16&AA&r0bxXX8}ika#T^w!tdM%+!)riHSA@5tw@0!A zt2oU}UG0%(&7Y-vpasti$H*@mWtmu&hea|Col$4m8(eahNy`gn(iwxtj*%Ttx%p5! zyELMnW_R54-hRpgqZ7FkpRj?+1Xvu0%LaD{-?mkqM;U{;ocwIoxj5!pcs&P8)@^KH zJee%a2yZ)~CnrCZ35tPh)Sj^yG-}K0?zdxJ1$q2&RQap~7crf&q1fo}Z!Uc;F-8lX zl3%YSfGVIzSx}*x4AC~%m60z-8E40TPiD8SVot>RCi*6&Z_o%R2dYtM$a^0JsC~~&6L>u2hX+k z?rid21KitiU{bW$L)oR^{C#YWL40rG>e+Uk>bvsu`<;z72^sS7LUQg4>`Y6opZ(en zs4L;o;_q`s>ahZdeW6i4@IK8=&|dqZ*N%e*+Tn_G0MzjyWvN_k9%(M{a>0Q7c=b1t z&6OLpzN8|TZ0EeW(5O>oq7O#SmZ{GAw5AY_5d*O7u4_P@v1^G0{v1VQ5bVJb28|?k zQho_yS)wO~X51_)RrLfbV*7)*ee#+wtA+G9<8mf_-yz$Tt84MkzrBKHs!jXoYO!uM zOuN2qPPTeZ=3uy?6Na;o{5NG_B((0I*H0_QIiUuN1G%g-(o`utkWy`P%kze=cm`LG zLfA;{*qm_6gi=f>1^Lkz^V*pPQIl(c`gGRj$}zY#V-_utK4kXrP07c3d->tIl*+=# zyqt5V7!8yl5a5lM-UyFm1`6T8+Mu{C%G)$nnvbI8w&oo{84W z^sd7JI8$v1w~~rY!Wzxa5U2B+<@WY5bx)kd8qB&L{LK}?)|2^ZbkMAQ`Pl(Rhi4dXGEX-w zOX@PuzTvX#n%-xd$@Hi>4QiU26urk9o0LIDp6lIQyZ0}TGHyW1W^?sE_TW~Oe2v%- zuSrr`Am5P9ApB3cBBNup2SQD6XmvTupnrRV$j_*<>?_CTYM*H&CyO1J2u_C+hMljJH*5@Lx|+lra7 zdtJ0hXp#Zu(h9;X7xH9QCXWSCGVbWE)D_&6RAJrqVe3VHmf+UpMy{N()25o`9EJu< zWs%p{rG(9lu8x*dJdBlDHV^(vcI-=|x4GY2dc#;w%TMTidCN-xYt6|vDO7pCx}8gh zdw})tZ|i0UN8)dw_aXXrbeXOhdEaa-mue$4od1oL9lrPWs&$KrXul$Z8I8}QJ8ZBa zBW+rrs-RbqV2V)(ZcX=hjYAn$ViVsa`XyI?xG{j+Lp2_J7Pn2O7W`2&~>n~q2Yl~Yej7!T53)r-Tj?)a%1WP7$RV_^M3@7UAiQ?;HeAu8E+`7tmOBfxs zwSH*NX6q)1C8tL7e0NY-l}WZjKt8MPvO0L?a6a$sJ+22MfC7e| zu0~pe=I|WB-1%tc2oe5BSH+#Xr|o4-?hV0eD~IaS-&kBdR;&mK)2i)n0o^qwK#Xw` z@)$k%K}j9+Wzd=rV;bGTwVp@qLZrg#7R@2Xsr$t$zT%?5c^WgW8xV_E4`L2Ps*96; zh0aQFeD^W7Uji{#`#_cGP&JfL?&*?DR01=y*PHE*g6|!1{|ZYnD)CF}D(@gKty%+n zKJUdjBJE20^u9ksn9%E71dqU~K#g8W7i11g)hp5)X%X&M1*ZT0Dqt?2k2gQsC|~fX zv7z8e5${EHv-)M(2@3{-$fLt00sA{te=NylzwyLB{cMLZOSDf}t5`1z>vLe*wau<& zdUWM1p!YIQq=@&+gbh5cd+l2rZ77j-$L4MqDX)eh=AhhZoVsZ92F!~hv)$NTpZA3b zc4z!t-8uI+w6u2df9!P0oI{g+e!K*BWt`LR+h*Jl-Us6N&q>57aiAGQ9wG!Wr`jdA zCN0|Vyuk`brjD$t!N}7^i)F>$Mcpg?NI?<-$MN$N^2Ch4IX2k9*|_>44I>s$s!s;S zz@xfR5;$Y5cJGSlBwnkF2V(~nA5>IMKjE~0zP{Z0u!qLX);d()u5fm+@_90CnQ6S>5rmd0SZ$xk5 zBNsF%)LY#>}kQBh*pAkHdJE3SN0~s&1*nj~uR`41; zJLIe#j%VXmcv+$LHy|PTgTW2*tV;v}&Vu*9l7!L@m*pTZ`)!DnT|Koj zbT&ZkdBVu!qdw!lnKp#2#OHV^a!QhR&eq`Ni1TzARpC@e(sD=~@VOo*=J??#Zmc9) zzQdoEq_(mBd=0Q$uj>FcmOZBp%Ym1_@usa-OECA2x8k3rOxyZZiC$iP5ATuacBl!b z4?&){nGUr0j5FcfQOyHXNl|TjIc0;?$a@tvuXY0ai*obJkUG?+`Xk=O^A_f2qg~4- z(_DYlQtm=dYlxJdS1!24wYh#n%z=1f;9-vy{p`Fh=ITc-d03wc=cFi1)YV(;i*1?Z zD9TEbwR*F?ZR)`OxKa4?XfgZB>fUS&wcSN1jt;wW_+v$MZUd`U5Qu~)92QLb2K$;j z%h1U6L4x>}xOp8StT*3j`a<0&$>byhcD?UiRM|z^`~^QHw5d?Qym0nk@uGxokb})V z;xv)rHxIOf7Mt12KAp>j%P(BiVbrLDrh;2v%xafLH_To}#(B%7ahT}pVF*Pka{?Iw ziX9S3YX|(pb@A5Z4}R6TJs6U>1{fgL9kXV~oHwCj!aplEwRc#DW_rBe1|-rq6vQEH zo%Jiiw<5HD+l1omB6{tu1)*UBthvAu+?QyHY#Hh=2v~iz##Of8ZqJP;6LU^DOD z2mH>muZ)I=`d=2{;(ASGF}M;`bL?BXqJj3cDm}CHI#)H;_lc{flZT=;(g_CARE%@7 zYG=#zvj=3r%0Ve2wi5BKb6 zeMdu>bstXY&k-kF6>970MqY!-CIq%<85OBb@5~jclj~LHP&~^COsOyj zIf^l^?}^{sv@}JNQ>sVVe)beqs# z>mr@T+t2=V!jzW?bwZm+LzCGeD(zUS@@_n|P1@vE^;^>6?i~9ukX9sYE^#$iy7hD` zn-CnZYm@H*PqgO8FstFbBjh7tQW_m9{t1ITXIlbog zP7CNa7Pow)8}|kW~=Iz&)Cj_tOV*;X$|@Y!nLK3%*OruKX||f0on_ zq&~^J?{paz-62VeIFT9b;?V=mXz}~%aOSvD?b2nZDb+LQch`W%#z%Q$i9U289;tbM zl^+4P70w1gRUzu~y~TDmvf2L}Q|ktP%ECo3u^CmF6jT}LNi@)>tB;PbmR85`puD=c zha|NYig_N5JZ|;1+-VHF$o}3y$ei7M15r|SN#|i18daS16=$tBAuNj0{;m>V2P5{) zoesL2y6bbFvF)D<2Yk(VILIqCkh1tO3YYPwgza`>w;xXE$?9(%VtwKg08Zw_ zFf`?H4^*&&8_lMJXzScveo-rOV~}SIJ*@_rQ%Hj1nu3b=`$FBai!%mxfDTW z)8DcSfEPi6Pl6^L=S;dAi<`Mh6AycluKjDOHVvx2p6*nScaALbikvjxvOoK%H=$LF&*3TP!Lrk9s$=^IuE4o?Q|jL%&Ia1Y)0J27!*41_vSA`i@K z>W~(Z$A%Ly!TDF>3UsG#@8t+Z$n^Ewsc%YlCTjt=2{ z>^}+zVUr@v{F%0-TS7DJ<3^-3UKT}E2ze&*&_oxh8K#T5NT%`WRR$~tY)|XE%tc9V z!jo}f$!~DS;oUPrtyMbRfO|U0fJq>z(A1;F|rc4-LO%bPb3E z*Eg9zr>YLb_!lV^fLo4hNi5b-o_-=5*0oT7*%In*+%Ub?oc%^YWgL`^*&_S+lj?Sw z{Wm`|hIFQ}Wf%5{VD>3sLJ(k%Hjh1`r8US=y)@lUxHSBChnZH2M9hj&QjV)nchKjWcs z3jLc4kq^6=Sv8K(m{;$pdIr)J8!d_`efSB5<=#WHDGdhd+pc;2Nfh{h)7_;BCU@P% z*w}R?iEkUbBh@)RGYhhXOfuD9EjpxwO@uTIPt*}PYGb|VC!Y^RT~TrG>U5R+^i?^X zyv7a=qRY!E933eELw|Kc_$%t}4{Kf8MuR^6F%E;n5VjqyLQte*s(bTDJFp0@x~U?w z?ww6vko8AiXnx#rNXeL_Yo)B)Xnv9}5f5~(bpNZ zrEln&tXX6MHvU|)qK~b~^~<^~o5`3Ir<+}LF##v^X-QW{XRS4(Hhf2hd1fzl=_*x& z&KgsAAqTvJ4 zq9@(-JARk`ks>8mx_RLzcP;dOueVY)iXGS<^W_<|$9R3WbTMTCzpHuFc%*dEF%J0F z!6{DtR$jz>(Dn#sC)2Ntx@aa*K5G;FI%^aX_63gj{A|BbW5PZfjxDG zr+!(cVc&E~WYt~d@2b16K8(DD8*hO|*s68&x)bwXeFf@0BrtlrlY zdbF@}K_XfyMaNqt+RLkuebcGN%OgUgWlSR58k=qOjbNw?RG=8nE|AxHna!T&$h`h& z=-oP>L)PEflH%QNwk{!PM*qnuWUz~`eTwg8{WiiNceeMBFpEv28B&^gPW9D+NlT)d zVL~B5V)N~vl%>>MufSa5Nt)4Afm*Cff{;(@Ou0uqL-4AQX~?_n{!LaqEMLS=jwL=_ z{>U&xn9kze6My;8kK^jGSXAO4l)1TT`uXb>_c1-%BKT?Yq5gTSk(@f$i#B-MAcKLUV+)W1J1NVH{H^Q^< zBe*=wTz}qOm@gU_Wi2e9><4LdxEbN-ek zRi{dl2vezWyL2-V|AAVd4q}uWiwn@fTFNRM?X$KJmoCfHrKQpDQVo7*zei<%PLDhQ zi#>k(mWgl&-s1>*J9KJu6RLhzj*0xl+lu+62oDVrtSS`ZRg^(|!V91w-J&-#o(MOq zkdlb$SsLr@zhA%n-3!a>tC?Rl(PcRMhT{tPb2pPT;3|I6oNmWycSCRsb-s-kt6QFz z>yx=h9vnOsy|8hLewmghbba&AsK0NHEo&(HTC@z(*$iU`Ci1hMMW`S4GL-BKJPRCt zob7gj9v|%x#tuZqbKji7K9B6G04wJs7B-Xy#dM8}(y@M;AF8qPiVYiL?iJ$$F-!g?7GYZ;P> zIsUL;H*7aj8yt4K@2Jq2sq!+f(!%7}AK6|5xZNzOr8bp{jt6;VgRrCUf0?_B>Y~=Ydm)xp@Rk73eJCI5jFQ!|1d&Ixa*I~?8SYn<=%_?G zigjlf?QO{~MQ2htTkloHCn&oZXo1fkB*;s!3Z>U}7-r*Ql788aD%g53mD+mb&hB3+ z8vWgTWvNW5WxZ$lcw0@@MVa3j;=X14vGekq6r5Pvw{I_on{f-Gz>_gEiguUob zs4#?s%Gs@&@7>zFSSG(8V^%-!hVeyn&Yc&K=A9WsjBqCrn(KrTB~erri{5Xa3iqg4 zxhAAdlytkY;xJN~qkn~C*35Ql@1IyC75s!55}C;R%2rCt%r65tR>1R^yEmP z8Idq4Xg!*&bKn~?tdAZ2KLT(YkL1rlTbW_gtSy<;n|Q8P1AlU2Bke|8e>AwZgeUQL zh&c}ec>e(7Z0qp0O~d{g@PA(v2!~ zFzOUlYLJ_!QP2Ai=luWl zDZB*At^%$uP~@eFp*ho`Ij(#)NZrT!H-LOz;_UTM%rmUBEUA=YY9%@4v~d(_ zVPh#J&rWr5HRD<|l)d;(DakD+o{!^y0eC+D0LR`f(R?SSym4LY7hXcmE_}EliYYE` zt{e}Ug}tm3O|gDw*|c(N?hB8Beg*KAkhK2G8ok_c?VC{4*vl-^4q1{UDQ^N67(_%R zQwr}R26p(jz`CvPgZ?6TXH>T(ZggJ~>GCoIuuPENM;*nxo--ZHCRin2GaQTw$4}m` z6MoD7A@N{0UKG`I$)mXiLFHKs{W^JWG(Bz|7hbfU zJG8#BGtZ{#mbP|xb}~Shk$wvP(mw;W{{Y#$?m9>-Un#3A@s~yU{)UEb8Y=jF9?6N2GLHk2|Lf1Yk zd~^7*@e{7cY($KUR%A&kI{C!A71R4^9~GWmgE*DsS1=lov9L zxql}5GVx~=aVL(xGsi3O9$atXEVz4w^Sr++#A7iTl(<`rvs&1^E@PKvc)VO)S~-1s zIaVhysf3|grUsnxv>`?ms?x0$r{TYaNpa!p9d`9v>GdcD#1SbX7-D8&9(IxDNWpUZ zvWcC$OD^N~U;Gp2;jh5Y7yi>aSHfS9eh1V1PvI|$x>lv(T@L2%>i+;vo5TJw5uHoJ z*LGLBZN;_RGHTP=N#W#FkSpBk){;tAC?qv!_G|ccapQl3S`_cTH%rZC*49~KCO5Z> zQn)LU2IdJglE>yLZJ|7%50(J+oe%a`_?v6vFAaF7!WX(VmaE~tdr8-{yXmg3A`sr` zT7|v!vognQ(v=cGtib`?yaCWx@%zg>F3mVHIjc_;xCFgEKLs)crP*IIqvsMf@OFoJuIjVpmfqDDY%vB3)7{)i(c9WvAz|iRT+0+GpPBnt?MM6; zllF_({vh~^;djGD)6+oF?X*GTtz%6~gLft7wSM;+O^eHPZS6xxWd*LKC9*{XXj4;W zm^87Vhta=a4}rQ*g?HbyOT!l9m zcLhr*jjPZ4CU8!D;w}q@vTi-%309Rj<7?(w?J9KRjm6~nY;5RYs(bN`DPys8y_YR{ z()X!KIEvKeSDrHY{t5BZjr=|ODezw(_@`2b5pmXS8rTd4PiYQZ#xE6(j$4k+E8&!B z)so9_pIO9Jprb5LH3d0Fy;`*w<<FY!xC(!aDdO;^K~lL*9*Y9+p#%VN1PNpzNC zJt35>@KfTo{gUc7{si$4 z*xfhBEcOyw`H76~i7rGhD91w@ussG(75WYP7XHlku>4v0vlor5t?%{EgdQik@LjE| zppwoldd~Y%v%l3ADUcUvMSvQ6NUCG|M3Zb2BrPA&pS17A&xhXxHJvZQz9NTIxYxC9 zDm`i|eLBcIQ0bH0-Pyr$EzHtI88X~i-A1uOWRZNLWY`%Ceh=W!fjkGryfuvDUlcq< zr@;I*LlgB{Rq0cON|KbTJUuzol<8KRb!#aqbSUAcIYKg=r39V7w79Fs{6#K4!+3YV zTs*j|HJ~G47qsb}Ljt>z=txQEqwBV&$5R4}Em*K9hplezT z?`y4Tcluqz^@{q^YiG#LLWxy#?nZs_So!uC>yF-^U)H}>JQeWw#NW0h{N5D!Dc~J% z;%=t#neR01J5L^Fg%03}eXC#0(OGC#;oKy8h4tmNt2+pU?Z0DuS^G$S&0iOPWxt3I z@c#hg4}$ei1#5RU5oc(=U@pvj2in4SndpeMg zCJG8QY0i~;RBCdmewD&LCuG_FZ9WstF*$Bc$22gq#@69VnVuF|yTQWT_{e3msSLt2 zBXs3C;r*J6=8Z{5Q^&j~;hkT`o+Z$HC7|0$d93)0RGRviCCs-HNpCC=N%yFQBuW&ojw* zb2rR#{MR_d!gTQTDPnL~TGVRCD#FTq@%EQkjAcm55p<&|euHX%3w$y0YvIp}z7_b| z%k91u@$ZK9KMdSY?6@S4@vyvYSZO?199eWYx6EEwAnHcPdU1u7(^T0O6$Hr^F7T&@Oe`R<-z@9d}xp1skY-OUK3HxIFarkfXQ{evq!;cmCM^*5BjlPfKzZH0zT_)b^#@1R+rw!+ar)?KYmi28e z^qX^eX!my-t<={xjbmsMD0KLmPnY8!4d8wj%5y52HxuO8jM{}-INZMnmExg}c#K46 z7*(L(qE-#5b2#9(nV%qZgMb5W~@sY<%98nAqlgQd&O&2`IU zo9(&$MdDY6`QBfgW?5z{B+RJeF!-9(Dq*T%F%hn+LZqX~?42%l+e*sMnOetf`(wy8 z-`Lmoozlz6nZ5{oLYV|dGCbBk9lg{cjX?)+d2Nv#05XihNH`<$_x2^!G_Q+4vk$|$ zwD}^M_riK{@J6|98DBQe{{TQ^Z*H=xsN43PCA9m%SwUer$CyJo^*`II{t8#{8^Hen z2RO;>W`mg7-o2-M@%*`;9K=RMvI)7F|AB?IF0DNHl#u zdz;xVBSgOb&x%Buzns6>llH9mm-{Yw#$OTmCTm?sM%7F)c%Q-A$DbyH;u~m7h>gT> zO$@fWg{sRju+**GO=|MGy3cJS_S1gD^g{82KBZHQ^FBSwbBwcwc-EixB|6xe6)9#P zQdH?zrJG^!bzCdY4M!Ih1f?2p5lW?6lsWk!&HdH%WBM?7lb!t;IL|7?WcaQV;u`)T zP~$!ZrNk8KW#8LWX=F5V%ylZXs>j>l@VMB;M+b_pLNJ|rP?CREbEKMuYEcnbSj zj_bw#3Gmm8ZH`myekRd0-EPfyW9D0JO5WlnkZ@L5&^mxua8kxVtU?dQ*K+L3^0&>LH;Rl3& z;I}^mY;=UW*M1EALbKOmi3{o4UZ>&v>j^FZ`PL0a;!7EpE!-=~W51GF0UZ8)e%wFs zRga4wwYG&X!ygT4W8q)HnI?*DN5eKcgtyw~i{!PQJDX4VOSOd-@XujuaRfJ3nk|i_ z7E#?Q&v_=JG#0Yk{+W~ThXZ(F#ksGD95dn;X_@92>Xk7#Jg+Fl=NLs-5h%Z6@qF>a zQo~b(nsu*wjV7ZRHxu*Rm*{=;wec5^GQ6LNYw zlV$lfZCZHjW-5x6JT>W4!zs=)#Mh@7%HJt`GVs;E$B){U=I=<-pwj#^t9btaTJgQs zn`Ht+W2Ja-Ym;juOt*?C)+>8+8^NVoqDF}bmN2LhHjn9-z_y`dx8r~iX9FDo_Bs81 z@n6jk>}m0D!=DL0Ex~=_`30wkyhWzTpkC^xCY5xjp6=G>+V*9PG=kA5w^Y1%)ufIG zc?50{ss5V29%_0{wPR(eXu6G-tESwdNo{?m-9dS0Ja_~&R~GLiQVbFIT;QI1V!s>A zevw)CgZx35&ZMzeTqbu$7|-oH)b?1+OPy)rV>C;a> z!sfg+mwiJQ4i?IIa+Vt>$2eB4hpS%ho-#FYa&nK>;R+a7PBkW~xJDHpH#?E_*MK7t zNo?n?@dp+BjsDwzvp%!%)ArZ#$HE^B*-3K`j=W`Uu6#d)CfMcC{vcir zLrJj?!BnP^HSD@I#lZ-LwCSg9kuW3r#M1mtq4--*ms;@-v8L!+MxPg*d8z96w%T=t zq-YB>&v$hsP(-0dM)x0gj+w9KqxSCowtO$~FZRpuC&gceFhQ+&XW*jf8YZ2pJ-n7{ z;~}AIxB9lNHe5$^blcXxxYMjIB@o>;ip4stB%&w5a8Hjp$BkYx zIm}^JbaL7?G1xz5sMTrHo+_;+h~%LQ)RZAAoVKU0F<_Pmk+x{!59*aMoqO zxq`>zaWv}D%Bb-U0=z5m#V3lFEg51l6{_O!?u=yWeOj$*-t1{M{{T*Y5Bv(V_QUa*peShGOhjFy<18=}&C*?nm zatFBj4mwvW`#XG9_)YskcwbHNH^Yw->AIwsHnGd8_cbmvKG3 zyQ3E=6WLuNt;MCp*7CJA zfXwndMH+I;@t8T%#L%7%LMn{Cq&bptrxc{5)S}Z;SGoMZ;~ySzh66m$@LX4f%(C7j zshHzlXNAY%>*29a9a^;NSN+uE7bQ8)Ql{ziLUD1F9HS)P^O^qu1-OKS1ZzEP{th`6zyZQBNSZ-KlAUdX#t!}VFb8vKhO_ULCAg6L;dC zk?{}Uc7fsVv_^bO@bO26b*m!d&RZDfne;2@(ztS*4Ugs$WM3y=Fy zd>*^_G2tKChr=4?mEzBc=f_%ajr>TOJ;lDEZQzYRMAJ1}2rYFx*cw=^_1$7!Rnk2& zDNWs`pKWt4qL#7U*bBer`{6gnABZ0WyjO4IFNc00xzM$ESIW3V#I`!6p>>h$HA^W2 zTi;p8=#0?Ljj`1wh@_~JFY~QfzX^D%cpQTlOA#Cf7LFegPY+Tur%rQ%m24uMTZgox zIL1w0)a55iT&^;=`b*%~hTLJ}_t2ArIB$xuSdJ9pjH4Bq)!^(_Z$`Eo>-lB_AC9Mz zV==gAO=2iuvkbQvJQX^Qlbqp(!{$(pT6JUXKe%rPIE+F;#{iS+agsZ9>+i?0uY8l@ zCWY|-0K$6z0F3-qs@rJ38t}G{eXi?zrR?bit&W?f+evkGG?G6YM;TbrcS$Uakw%Xr zs-NZqz~As%U0+Ah;Dg2g00itcO?DWuE$4^)RX&xa-OK>Pt%d%XtK8V3Bj!n~%KQ+USz%wYIDI8!G*r zzB6%$8sP9eXNAgmYlLZL6sMeLk)MU}iG6ZT?Uro@ zp(UQA{P|vFHzkC2&aL}X@qhM9_%r)hcxy$2#z}Jx{fr)WhP-d#dy7TYEp0ClOXSCJ z@m*PJnmxw#xfb%IiM*NZCxN7rNk5S>VuUAjRF)%ke2n z7jjc?mQ6+e^Y^imlqyoGdDEJ9xB4^VU(u6@^Ze%|o=d@*!*hW$?v9IR-rKxHf&Y^j#>i5@Lj;E;H&3k{SUr#O7<>lSPjV$*! zHxo0@VH1#)KGOLQgTsqomr^5 zm8w*3RUDk;*2m^QM}MLpiJUd##%c79@yCqv{vzYL`9>!y!BNVm?W$LnCoZFseQPts zQ^94}C{e;>^cE8bg2CaX7b(KET9oBOlC3QMzLaG8pU#qs`1Ac87diU+{{WxoNktR^ zddpMPbm#Ll`|GPIIv2H`SQzn+S~gSCuU&YX#5d6xZ?(Nv@)9s&xYRDCjQbUN7!mD^ zepQD>WhxXUHBwY*N}}3wrw29ZCa?II%MFK|)mhM^I*QFyl_*MT+gffeO5HWkaXIUg z$2mDandwcUiqzOBqKW`q^YrL5)BOIm-gr~um&C6Dv2O%;`^H`mCm^2;_>))B8waQ@ zrrp~UoSgIAir}cMF&JDnGLxZ;!_dW1lTK7|6lvF_+S#~OjH2z*=;p=Xuz311!(*_R zY;GQQ=b?+COA|&`)pJs<3Bp!-tHs##FBbe-_@m?H3FD85zBciKr~yZb{86myyF%k= zU+p`~oB@G=F^corD5ZwNVQ^HH3?3T~grb{jjv9?R6q9?kPLyK=-&U5Q!QgONbrpuo z@OWGf9xb@x@OXMyYB6tC)haNBG~ZUEuTy74@fN?~tLU{q4(nQ`g{Z=JLw}>+T0_9=o-iE3-Pm7(4>e#CXK0lQ1Pwyl<bWGW^;(lpJhw8*J;aht zG^}1prIDnOZFoMB$7!am6A(D dl3FB|$S9(ULl-~i`h7jAD58K0D58Kr|Jfk5D3bsH literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/html/images/ring.gif b/src/SDL2/external/tiff-4.0.3/html/images/ring.gif new file mode 100644 index 0000000000000000000000000000000000000000..2a614f4929e4cfbc14e656f576e320e1ee601e45 GIT binary patch literal 4275 zcmWO2i9geg1Hkd`cQ>1v``9qUa>d5xJ~rnhn)^u1eLgiRMJo4w-=vx=x+7Vb`3Hu8@s6# zu?;@C1AWnKY`14)`iBoZcnr2P|5#f5u?kS#VN-tp3?=RyAya>|jrQ!{A!-(cif>JV zjW3~V36fh!<;&lrvX({u*qV6lYC7y0d``y>-vhcwf%pxnux;Y&OE85WQTu)!mRvs_ zC;JV&{p2~cdB4Z5_J4%`BuRiRVvkYGWogS7jWxxM$CzB6YCUn_rtj_9;_;@L#rVFA z)8OREZsi+^_c6=T_w%y_*3C(ZDN9+*%|uWhkHv~+W@TaV^5A)ttR)GeXrZBQ0VBzo z3!B7Twj-k@RA3q!ie|Fn09H6`ACYQkpsS;!rKw4$(;f`qa03JVn!Vk+1_o53uQ3`A zh{q|l$S6pl$vjsR&=M98w-lGZP1d7!_THz786lDS+WWWmtE#H)s9}EXsco-44`!|< zg9Nek=j_;Mxoinz$%x{$#$*MECFJycyz0Y3A+r^~?djlQtb%gTtnV}$(huGAU5)1R znD7fyaVu}e@9x{nxJ>&6YM%zOhNN@|59S!_Lkfx#@lEehR`x|=N^EZdd!s2I-{U^T z)hP0}I45#$BYm*z=Id^5;ARX?l7p7k&$SYC&W{vaLlam64mgs9HIL(NW)oF~L0Q0T zEYM2fmcJNgqS{3_z=;?AA-C}H4Ee~}Q-*l<7`G-zK{SzbX9>E3y+({<@pI=PUS*e_ z-Q+A!CihS7%CcG4<3BBRTP(ZIW{Dn~M$w{(Tb~iHIHH;Mn>_`G$8z8WS_yn<&W3?+ z;Mx0HcnQvi_=(6pze@v_PY};a7&!Dgv7;(pXB(a>BnDELNJX;@KE$o!R5}*Vp)k~x z_STA-#-eqSc_v!R5DZp*v@yu+!uZ{JCZgTIFV*l3F9U08gyYlj@2CI*9~1mu^0o_& zK|du)u|h}y#B2z9frF5@8Y_0jcm-*s;e5I484zLZr^7J0a#sgoB@E*!)(RULSY-@Z zLm^3PY(88uX)Q%G>HFL#q@o|252$dHnPu2Inn%V_gO#PmVmr;{rgG1y<>qRO>5B*n z&Q!`p>D8Q})+T?~m8(@r942UXg4>EfFX0@oxL5P|Y4Ey8P}FjJy{X)!8s}JPFx4>8 z_UPGZYmB$ShefRL(kv7rx5oA^oi&>ZyV6A>TG1^qYk_A-SKJ)E_r5UJ3S+g8X38*6 zy{8xDAqbLS{G41Fr%kU1yg-xN+)hEE)bIS&NR9v|)hxS)!VY}SUYvAXn{Pbi^xK1x zGHUqOjk3rSRAM>9M!Ec0z~gOvLFP$LQ;JZ2+;DX;JVu;kB32~D^!ahxu4+`#^oQSJ zi{I{UmZ~!9`PA{TwOS|;!oZ74jP~21mj2rIhLpO5`RLFDoI0N!)=NKU>z4gh&iEGk z#t}qd_Y_*!=;AOG;1Gdf6lXTHx86Q z;&R#cOF*%OYVbc66$}TL2Iyrp*?Hn?@^@Is`uA65Trc$g(c}O6-y?dgri%SVJj{v^ z?;pNV5pSC67Lho+fKW!DhrBvwQy+8t)H8vEHe4_fE;kY-EyHUDk-w9Xtab)cIG*CG z0FvqwdGHlZj;J34$autn;3%NyCIF}(R0as^*_aayaT$R?O^2@qiy1<_`@`B zrz{4h0hh&kNRnUAW*ux0r*|@t2N%RFm-wiahiRa9EMO)`K?#o_VJsq$Bm6?Nsui|h zn+Tu;fT&J!h09Nd$BkDcp^R-XN!< zXF+%Z_c;tmu~h#8cn_KkN*nZ!>##I1=+k_J{Pa~UVYx&G#|)Vbv5_zn9Dl#&ayyX+ zB5fSTjO~_ii;;_@N`Pcqq>vx3uudJsFs8&m0Lek~-6@#W{cvecm{xlY_8vGTvyv!u zHt4C`zjDtMzZX|A*{T@%r3Pg~+&h_u6aeL81<1)BY3d&Y?K7h#GSM%zCA*DgM{b3O zJ77nx_C6{BLK&x^%Ir5u>+FGt0+?gYFt94X7pQJXkh%Pr74}_4)hK*Gw9u-2cw3_b zGNR;z?CaSsLdkMkNCK5%MTmMZxu}lq&;Sqw_J8qwO6!GWV=jv{pI#6yJuG_sXiHhA z!{jZ~xxXVhxm9V}Pm-vdVw--Cf}8yqL-H(NlweGORYTP(=WJtxUb^44JsCGOt_3ed z%=8l&M{o8<+Rz01OLmE@yq~BidQ+W`7GkcBO&>Z$F|Fmo#TPW#Qsnsp|b=? zV5HDt5h8jwomLJTf9Uz&oN8Q0hNJ(tV2>M$A>HGs)wdg6-Q2A&EgoY`(FYlOko-+S z*v&Iw?8lj&8nez@(-k_eTcc(EiG2$&?+_3nHeVW8_v zF#Uqp_v?Y-(BJ9yjF zO~V>B|M%^gL(?adaYTpzMm4e@w_~0-5v+g7)}_2zdm>DrE-&G|s?k+iz2~^z3%wHY zk0!ycrd;;(`Fm?&l&@RZxNBOTm0AlBCB~(WNw);Z6>606keY=a4qTY#c=Wn&IcRw2a-8*?| z^7y46Yo7#P62t}NjV|Ab3#5I zs(SI+S;;9fyCukO0F->k&6G(7q{rM8ShlfwP@Y8KAHy{MZ@#R>(=D_d&?#b_x&T12_HKnrqxubp%I%a zy81fP$h|@R`hXs2R1LFS>9@&4)!+fE^Rt#R*W8XUb|j{% zrk#n@SV=O{Lo0P6gz|R>^sKbwRgTjaG4o$DmfeiK^ZYweH#2dlHjj@BY|&0#u|-U* zo(PE-{nSt~;fH$8h~A+#;RTXbpeITEn^SfdDd(e)rmHTM6#Xkz4V`Wn%eQzBQ7!*L zo?i@aNft{bYyFm#7C#>GCDj~8$5G*th(O&NgE)s2H6y8g5`3_p%)Cg}7y6=PNE2v@Ys65?U$}QZb(}lwPA7W%AYnBHR5lS3=>ZS`j^sZ}XnUdkO z(!O|)ch)#va`=%93-NWLm}?HYILmAAo0xf5&ewIRT>X$*7pg@W)p*_Sajb;G40X38 z_Ym35E>>?)#kluB7ZGORCNWwaq&Z5MsL!WvWumE}@%rAq z)n?M-?ykd>5~`dDKku1-HuogeGEGABMbUd!K#!EJZM`v8Etpnm=&Rz{nt?YZf=`Ac z`C?&K20jNX2*=e5Bi)P{ZZg+dM6yKifi~ztrtFsw0aYwjLcEX}&*ba0=YD2TyS1sK z!Ql=M8ZFiX5~&y4dgNglAY|-m&Vs+=nw<4EYAY3A=`;!o4%_Kbsuv45z2#@W7U66adQuQRuY`VbEzsY(k}eP* znDrY%1;qHsx2$un#vVb<%NqmqM14&tCr2;1rifZplOR{7W*Sivl;uEc_-OzOs_n0+ zeKTSx%q?Z#3BJBn)uB<{Rv}HRxo~_ss5gVuS0O1WP3Mn5hivQE9I4Zzk%5vyoM9u> zcR5#h?RvA1a$4E<5t_F{R;q;JVH78K#2a?k6Q^JDNY1NrtDLS;TV-9LFBPmy^c7CF zTcC@hHTLvPIeryv_oWJ>%RS{?HI+R%KHW1R-co@WF*74^ysL`xvoR5ZhipNo=e{-i zfw`IpvYxPKefF|+&t1afLDA}OLFa8RPI>zltC}z);Yo9N)j-EVu)2?5LrEbBd792I z72y-)kB(L+4$8P?yS z!tk2p3E3h;METKDO6^DJ*hzQXH^_5+rE)2+hicPJWr z6zn1wn-UT6Sv*($WcHsmS8zJLsOPZyFy=m8On^IUDX6&Pd+0}pqCb+Lye1Vg*K%$} z$1#FE5XIi)=av{mE^W&AaidQebWuZyIo!Yfe5<4K48jc6@~~YvX7qSo%!sE;14+@J%;MmtE}wJODt9*&#xU9j1QWw{Cf``uf4w RUk}#s0~@9TMlvwK^#83(8SVf8 literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/html/images/smallliz.jpg b/src/SDL2/external/tiff-4.0.3/html/images/smallliz.jpg new file mode 100644 index 0000000000000000000000000000000000000000..8eb827f8ad56ff57e9324c5e2fcd07947aca0c49 GIT binary patch literal 16463 zcmbuFXHXPT*XIWTQ2`NJMFg`&9q>+}rn@|2_Bf_iKP>YD%g~02~|u0O#KUxL*V) z{JZ-9YyUCw|7YRf)Azptq>lif0H1Jim;nz+ad1g-?)v~t|K1b-zib2kSHpRLi--S^ z;L+nJg#S7;JOezy!Nq-mhl`Johxe~{(7*ctJW_nJmx6B}l51HIFuOk&`kYkoh(*4p zn?idM#VTy+5&HNEB^5OdEgL%rCl|MfsF=8fq?E!tMI~hwRW%)5J$(a1BV#LT8(TYj zu!E`yve}A(70{cI>NdIv?z{A7E zBlr&&&I8|nCoU--{!77!WN)`!Kn{TA??8>s&97>Ozk|ZN=6|RZM=L*`!=aQv z9+%zwb)2suza?(?`=bF#{RZg-hl?QejpG0wqZpn>2B_X*VJlKo=4G1wiz0)K_>N?nf;Bmn6adQ79*_5< zFZr}z^Qd8*ZIBX4%&mQ-F`o2f@3w=DHlmOzp7e*T;>&t;Z^u-vDgs~3xgZ+RVktyI zCcA%~W<|K79!Q~l{ zp3ny7Q9E?q2(I`%VW-soE8ifG9a?B#T)gN2^Jsc^{8XXdQ~UUeARgMBqeU1-k=A~uKIaEyYFLX6=)Gw zd>E7~v2Y`m)Ns4oLmCrPUs$1;<*{2m;a*MZmPbHH#BLLw0IM0BE>v?+pUG+UO8$`S zs_eC#y}Xx@-34ZXr}TrL-#tPZ-vewLi=Q+WBkkWMno!#i)5ClegU^a8(xFLdZWXyd zI{8rBU+Zr{s&mKuuIMsDP|o}jyNBtfhtWvh&x4H`Ng1eZmtHV4_95!ue(@sW_wC|Z^7GGMuH$)N zA}!w4)F$(Wef$OYfUnZ;#q{Op{6}rUr2I5LVgy`9H8WGb+2N?A;a41J*rP`DX58G4arFj1&-M$RYhk7em$o8pI!&zovwWHttt7c`&INu2i5O_2qK!|e<}m_G zHpRZR-7`M0fpKLO>OYZ(9uh$YcxJIA>!1merM+wA_(HKkzsgP0*10t9F6*`03m;46?bmkcPD$*e z8bP1BH=B9O#j8V0sAmdEqPc}ra{?4Aq#Zc|z?&HrSRG6js=}aQ&MVHA81zQy9#CxG z8v5~(s&sqH;Aq@t*poI0i_FpX(jDX7WGho2R~ORAojTuHnhKxTDQ(mdab`v3X%%{u0aac8bSQx;xa~W>NViWvw4UGIX zgQh03rQlU!!Hq3GaCa;5ez-ZrH9h4S-Sqk%Kpvnp<06tk3YH4{B17IC;P9bmw5qRS zmE)(1iyvNm``j5mQ=e4{R%oiBt6|Wy+;mqgiI`tFi_H`8k}80bhI9klcZBh24OA+~Q!_`M z#jbEwA;DwMFHe}SPq%lNI`F9=(gDfMc96#2;z!Y-)9O)IuN`nE$wZAcK|jnY16G*r zksJ0mv&;kfk?Ny&Ab=0__>Tk@@{_Rd6ue3&(w9ErmGFGUB(~Hl(VD1ED6T(>054xd z>dCn#4OXxf_}JBZ-|~`RI~%s0#4bdTZU8K=*jz$`0JI#l?Nh{IPcMGv^k9?Avalxc4!4q5?VH%$B_qpwcB*@9bUmB>N9&t zQ9iX_!B(9%@wCkPG`3F8Pa8_BTEc!dmv_BrU4Mg^4Sv*Juq#lx>#phOZh6QeJje;2 zqF5PT_(&)f9t!|0DVyCXB67L!7R}H$qj2a7tsn1NCa92k$esP0!XmG{d{>*E5pj%Dr~f-IS|<2KUHF!TB7|y zO)DpX52BE3#>Z2}XU-p0cotYen5nDPYgI8-y0;4%F5&hGA$L=^Z>l>z3c%0k=Tksj z#5p5w<$y7|GoOJS=0>ds$u!E@_kbPrVY6%QH{F$+3+F&QJj&Oi{jh>{XL`&%02sdr zkhoNEWxK4(B(Mf(ASO-{`xUHIy%;Bc#}~NCK}s2If9k|Dvs;) zaf++19;|{++RO+QLx9yj6VjwK?!Vg=Yj3)kgqq&e@s2!h8pAt@~I2lQL?vQiyZnA zuOx2SH1N=W5QBKkv%QrG@!Br2xURdA!g64O5IKAb=4keo!m-MIp@o%&ooY{-=8rG^ z9=tEYPA1a10|NWqJflx6lJ$}NEY%S`&1+Us-4^?LeRCabirnsT_G9v7xBDeDoDvmg zY9Ok|QKr;HDvBvU!%MxJSd{^e|_%X4fAjapoL2Zg-qK+m(blDt}cPG}7(!KJ$rD@6q zI4EK~qV8^Ap8t{%Pe_3_jq@$ut3QJdXE8wny=E`bqBAQ@)8A@Z^5p7NAI5nkj+Xws z%2xd?R4!;)N%5DV;V6#~W4gvO!l0l&6R3}N(0AT+kb2Wmds3itdUX#FBs=0>_Y|a& zjv^4fUQtZ3aC0S2v$+T8mzOE_+fq~(=;&`sj*qJ^*C)phdE24$pSim{j29r!vP~SA z8?Y>)G3cJy_okrfNG?%TOZM5+fr6qJR0X_)^{^5sfrQQ%JK0X1FEFov0{ynaTD#if z7o2}4KIjtylF{3Ej^jui&&>rYqXOPX58X|oG(iwV7)xv3oNDydtID=C=PIqA@q+n+ zmiCx#woKfcrm}2=*^N+F<6` zKcD4QH&~r?e=(Y!d7sR<_5V)%)JzHuCr`x)M^$_=%%;w+=ZJO4DO3W^Pnis#6cx3k z0A1|(oBm>@qk_{gyoFR0Kmkoc%`^n+yx7c;Bqd;i*mhh?%Uwyz&CF zP^_4UkG8&GIIbMKOLMydL1DnqPWGvg2rHA661RV4CEMqs4BT>UKHs@j}8I zlyW!ILyXSv>xUVoOMb2KT>?>Ox2<3A*#0_KAyVGV^0{K`Tc!(7>`tod?ZPD}5z|9{ zTE6)M(qkMZsG}bPK)OYq5kCc%%wnYoh-E1Vm#E0%6YG;xmZHZtnQ??UJ4j-R;z@x=b|A*99}HQE#jlgh`x)x4(vbnPanHmogggprC0D-1eu?$I%)il?GitfP z@6YYXtt{yL+jxbqqSJ^F{=6+rO6Pl0l!E&uzpLHv=C$GvFpr<#g=pH+@TNW<{Kmrq z{E)_G@baw*kxO-gcS86dsF=zkHxid}4v21`Sl~-5ma$()9+@g>y->|2Hxnb{kF$Zy)^7F+mp2nDoYrD@5 zjQFQE_J?@^%HCib^M8s;FH7mOGC84I?mBX;Q*R#F*kjacPKJ_b8HZ#U|uie|jhzNnLCItf`NUgq_P zC0jn0WPbNSWy1JY0`nM|(?!qT4r8RBo-rEhG}RB{I-3SJ3Kg&>yECq*>onnO;0(RM zy?Ti-r`rvtpWDdLuE}#0kkyU;7odVm<(ODTlw*eBxAL@$rl==`knkvUiO( zlgm>V9uPNv=LY(b6IAVIramL(n;t(|>4Zpn7xrrdPXez=bUpadB(KhZ*xd_sUS)Rp zH<#}%DTZxK&W(_4#XoU69*aGh-YS3>AOENb(cV&{33?|8AmQ_v!nN&KFBm%T`aQ4= z6HHgi`yIyj0N>Fjs%A5JC)jpjCb>5nQIb#=+i!{T)8L^}%2jRB@V5T`4c>Mkw%JjA zv@Dhryyq}DfOdYLA6~JBl7J=D4&`!YJY>@Xp^b~ikAeu(>_Ew2Zc zOqc=mL9jF#E&&(yOYi!%vrU02&*e6B;wMX!ZXU00QA$z6PPJFtOb3|_Vj|)ZT3M&wk|STBgoGtK=HMXzWKNOXa8~~rr+i$y)i0tG-HytZ^=&H zgLc$%R}3?Z&1*`uqC)T@Nc2pFNXh(=T7REeKU+&e2X_FsZ0F@|>LIJ6p%dIr>)Glm?Vio>Lum?(N1Q=lqY5q3pUwyMvB39*jFg! zm_WzM_u0ph@g?gF`X?mMSApew?&f=U^k~@_wm&t%AUlm;v#z3q((`O5*oBP`#;Q68 zzrX)kEtIPpk0^&2^tn4+NAyk*Vs3P28W=P}D5}zb!qbaHL5|XffkNx=+iPo~gi1yqH$W3hrRoP`TA`|d8?3vU_~Z5M7W zcg;!L1%s^Ca>@Jii5eyzEnzBpCpD`HJ1EHCOnDor{Zlm_VUJ1?F03nmRJ6@M_16uq z-vh7|1{aFx9R=H-uwq=ogM{g3qx<6~)U zf^DZy_=D;C>d9+bCllXDMR#BvZlyy=qf_{`w``!{y`G~^85gJGNH*z*e^P}>xxww_ z4jS2Mp17UbtSRod0*W2q4N?f_*`oPcZUd2;OjB9W+Kx3fPATJ87T25U5SxO2Oz0zt z_+{36V;U%q3GntV(R7MupVd)w^ea@V|7rqsW+_d6HFTM!mOigMHWoY-Xf#E8e)xS- zIW5S(X2RK%qH!9(E4|=tmQTS1wM6&e+t|6SjDyV^7IQ2=Iye7N5ZOgDFV{OkeA@`D zQo2y4noBVUqd={^8b%w=gF|4Ni1EsDaXur=;f=3j>&6tu3NaAfnEp9$c+oJ|SY3W= zT+AlwTce4e+Jdw~h7;iJRu?;xJ|CxFPY5bNgyga++nk4d7}WPlW78phJe#ZGrzU7J zslDNBcEqQ2C=vp;@nd?99wgVUNVR&Ii}0A`ruku|p$(y@0H1Kl$F`Wlb!Rs5Hrd8= zYO|YM*GZy=5LriO6Lbz!rlw)>l4lh;kUsY%fci`gHzH33h4)dl2`b^T`r0vs4of9g z;Amk--`ehp?-#Jm~WC}eN-nJY$4mq}cS>9REm#@$t^0ths;a8%B zWn1aH?5SVaekDO`6fRph=-#YZ>wa)hC0@M<&;IWG#)Q=;>DNP|%=sobRsCCBGF{xn zE2m zu71vw0cX~tROZnQBz1{ip7R!%F>7f``jm}(Ex0aEhW%~(Xe z$6=+*+4|V`+}G+PX(q_=@7b8fYw6(`oCq`DeD7;@k18UiHw;=9Hr$_h1m3(3$R38g zcTv?A?&)WvVbdU4jk_Ld5i7K=3KI1JRj3D&kD#9v^K|z&5CmD?`F2higb0sfB~d|v zg3iuJQ=e1iIhN!l;DzB)Ev#6DT`zX?%hP;8n*k4r%6kB1pvm8DRgs-`Y3I$~Xb@-! z@2_HJ=XxEdNqr2K^`o5(?L|&(Uxshp?!<$PAi0C-fzQR3U-9(j$@%^u{K=FwDNc^# zJITzJhDGH_Qix}#WDg&1Snj$2{i4$|x3~2yg;V0!7=y4819fDD) zoa~${Q?xuWoUimqB{KykFAg8*b6Y8XptIj|Kf4Dc$jVK|)u&UvdMjG*(0J*P%(vm5 z)GUxoG#NqMoYdkWj*~~Mxt1T-MJ7uPF*nEfB=*2vs_lZT%IsU~*^wg27p$S|x{?nJ zmuV(d2ax}yw2_@ILK(fP-!4VmA2Uy*+UYaLFt8zXtOPk5esz8+62a z*HH7+diMb9{vHR9YSn5Vk4^uf%dYnPHs51ewKSAO>{BVfP7)GLK5v0gXiA#0X0puq zNp!9xce&4pl$dC3XE9_=Ck57UN=5)p$wa=gPmZxX>5+^IUwPcHHN$(T7rS-0IGz-j zC##>EGK~M_q3we%_Ylilg|&%8Pw#K=e_~`zJ>9LQY0G4I+Bb};PWScg#?GafeJ6Kp z($hMB*nxq1&#xv>6q8-D3RVJ5aOjPYi=yrNQh?6ref4l{>@mW3nmN1#gu#12=sT5X#ZVVH2qsG!?8Xv zS>PwYdw5P#vwN*kA85nYUw!cv_7~*PD9e1p{A|pXuU^*S*InW`Mwm3$=Ij>+%l6*X zwuV%0JKbTi%k4mTVUL6?mRW={udQqg(pYpCVUR-@X$C8js|ivqm@ z3;Dmhi0Vh|133^K!b)A)kBS{D;;4ff_jG6M;A!np^mwT2MONTaG1Ix(M7m&n1$ zV5V+JD|w)L`1rs9n6`cuF3cZMYWkSha@KCzsq$OEm^?+2ZQG1xeWPOnvkujs>%sIr z0H5MEK@P0i5JZ5;?*m1i-{?@5xPvRfR2Sj`R^+5?@INoI2{eQ+(|QuJaH>;HSkgA9 zixtSzbUUcV@LH^f^m$apil+DKef^D0wg=qxeY0i;t0rlwN#11B{Ph zX91Y?PSi?C@e&wbgirIu*rez0*va9F508tqE~@D1>|cx~2$dgqV8%e$Z^ksYY{bG> zj#qw(wnYGy* zx@E_cP}|VfOYfvC^lojf4EI!NT4Uz;C2(2Tu#rm2x*sOVq4Ki|DkeMYVC|*z2-g9- z*!cNm?%d*^rxtHB*3nGeK-UB_vQX(bJH+i)jvX?`zL3;(8S>6#X-IS3;GkPDNdYQOmU|zd}?iQ zI?nO64CQRx62xy8mg|rbX0Lsbl+ln1(oWSaX>Z}Z%4nTh8N7XTOCh6!SP@4BLLvbrKs`}tgk|g}noptuNVB$YkZeZ=(3@=Ma6#hb zqKl#Du%>rZ?(VN_`8UeuzX_#YHF42tvYPS7OZ}kKUFYp|YoPrL9(X$Bp}}V+Ugxkk z)iFI;cpVzfU5QTHg+-TyskXBjjb~r?H8pUGm8%vV&9SHd?Rwf^!5GEXkJV&sdXdIw z)2MG1_}<;mP2xlF%~jUxSIV#sGP&p>h9W85P7?d$Bi8d5eHPN- zhSImlL5YDtg7Q4oMKiFkCv-Xzp3fms8-r5gK-~osq1~OI9c(y%=T(Y-q?)J4vaEB zUI`oZOWcZeXc2061^jir=Z8nSB8U=3k zL0UDD-AEMkN_u9_n_w~Ux}H`tgqZ^=@ne#`f@iPe8x(y1Ljh}g31(~ zNl*Ifil_S0>)6^=>G!PVZFE?Q_Gx2lY$L4*qOU#G>QoLNg>$;TjLl+=?aD+^ztLeS zcfFl<>9dj?+IWJ^i7X+it>XCdtxPl9dAduw;;CztrAW&sm^shkHf8$N-*TlM!K(-iX~@@WbpnIB?Txd;s$ zOktt^nSlIyxq^o}?D|S+aS`{fj2GuIe!3j2D1UDwhOMS1E5aS#@plnECPF1n+Av#u zizO4yZGN~X@onJX-6Qy?Z5NP_ubcE~2z4+u`11N`F8TrNiam%xyD?l{>|_}D=lis) zD}KFuy|y~ltKr2h;u`s69e03Oi;^EmY7`~nNhOsj!)neZ3mSkH*x?;l+-}7g6*ZW^ z3pdg87%NX+R`+ujd0|z4+bi!?#8!NT>FiD6+4`FKLBc%%FATGd4(Mr}>v_!=%#Q`O zpi3eozGl81pzsAzSHjSxZ^owW{N-{Yd)l^697*L$z6ZGpMcH=dg9=|_i$ z@AMA`jDts*P^#5%^NY`ziuEecAR`r8JRu%Ak9n)NvJ{VT;$y5$#^0OZ~pC^DPjVU)l54f zE@-d2X(vuKz4o759=Gm)FV7J<9UnLm2e zQuXeW-Y@O&xyJfCD9gw9=6o7&6Rwgj(tbdBq-wwBw->nh{Df;Qn2II)bR@UA>fF$v zn7RcpY>aKl7-u_d)jLLd2(I=Iroj25-oGVT56T*BpBvMEn*6n{PZQwaA8B07o*vx9kyl*1_Bv0*?4 zuzJ3b0r=~tNPJi!q6>fZ9$?{MTs0G~p!ma4zl=58YDuHhHc5OTDho8k?Gt_64n(^e z|H9N&VBbQ{j{y$i{_TP$Z<@s6A(0}@$%ysZygL*j5C-FQ)~2@ZvUuKuU~T?1xV72N z8?2?S=U&Eb*b2>?9RA|W_I)#Osq>^07F^Qu@7E_7Q!WzsW@CEY1g!}Lb^VMxOPt~znVOc z0UlF8{9lU^t3EGkB({YoznL~6ETHGFI$y3Hlv_9%xVu5l^~x=34mNf^nsKhG79plw z9dKL3*c}=>ac0LStc#)9wqw0P#4ZCDHwTAom2wL!FRXH9jK0&*VbJLOKDjTyAU|J+ z{HA3uUeA9zVvFAM4Q6Sc3FH%NLDD=Qh$&lsTV`gy6wc4+MJSRH`D3{`_1Ad<;r@yQ z3O_6f^X1!KClji%$=emlpzvE(FE{OQL;NLcP4bGmJ`8kAqLIGx!Yd5-vN2ToMY3X` zkK>nKiB`9g$R1=%h%b}3CtHB3vBvK3-YqOcd4AJt&x-Zxv|TU6hBEtt+Ru}Ztvp$M z#H-bJmc6UYJRzSd&<5>^XzHU==eU4k9M=WH;M-r0?v~g7B{qK%MZm@I@JVFHbkgEjHpnL~k0Wl~zD^g5k1jF5I9osc_)W4Eh2|M?1LYU+*zcdyZS>@KZT zglZB4>eK(e{;nRjt_XAaRyRXS7xdOPQ3Rm0@{WtFxORXlKf}E^!fb@}pu!;9t+a-3 zXt~p-DrezGs~9X-vvo*fB&OB~vAaPNZ;@^xw093M?U^oGk0^{D{g_J0LGwgND@999 zW+bb$n9g``LoVtbV5u1mXZ7zaSUUu1pkZl+K?z=zAr8~+Z-rOi2pryxl#JK)`~003 z(O%*<>2ApE^syibbuc5q#33rc$D#=jG3hYA%_Fw&trjf0;IkC2|Ung_1Vr)-; zKy4mvhCnTJ$(2rhKrF?1=`IK>iZo~t92>^R3JCgp?d$&bC8Ok!IufCvk&3fgR*SM)F-B34w5BMO% zjt=2K$AodZKQtNwGSHfhP^GKs7RGMZcCsW>aFAGT%mm9?Z!&qa>=QE4VPDtJ)@uc^ zZH`@JAl4mUcc$TV@(8l&tE2orTrIE=6;sW4S8Jmp`g0$schZFR8la9Ukm^d)ni0lm zh8*RRMdQv5VJ`BfW1B0tSf6z1D0s2v#0u`+IO?L#0)fU)K~r~TOH7s|5fa56QP;4d zQ$FWw6MLC)rD(KfUk@I{vN)Dm)q&q%30LkU7O_8@pevUNd&Kjp=nK?f-LSHaKb~9H zPJvEuIHiJK(LXVH)3dZ%iB$iCN1N`(;<9Jegq83JYJNMa*NO|tIj38!ol>v+lF!d% z_4QG{^-<$NaN^rFkn0osH@(hJi_Z|Sby|d%2 zU#DK-A2L-n$J{n#pR5i96Qdam+`sMnWEivcSM`|DEjy?XEZEgH*3atbkvCnW=7X2X z3+uI7Bft;g#s3O7j`&^eSU_o_z-C_OGnJowKc-phLa!Nw>>Jo`#CF5&9-+~7{Jpzlw*6|DpEVyPP(t(a&;}T0% zzPQ?obUojvqCNjv{ZDg#VjuFX3U)a$hd`%8r{hePB|QY};@@?p8yQ6@r5n+WEc^j* zUJ4LH^g-1`rjEhllZ?~q(=P&Y4YWIFY^Owac=Ny(4ed>ie+u$0REwg9R4n|A<&~B` z@oX)~as>*6kiIQ+#O?p0{Kd4Mk1Y*KKIU#6FYlZj@Q2ZK*O z*_`xS+J%>KXGTX)s|otJMeu6ZIZL~)PB;;eD2Vr1SV(>7X+768<_QG&Vd!~TMpWs@;SN| zO)lE=)kSwCm<#jB?5}qm&424%$uJ|DEmL9D;q971<>p4^#?=|54buviK*+MVO#Va|Um4-&}MR3ZJ zU@S=WBKHj!I9zwz+b zK|l+w9JbY1H%I=yo#pT`W6rbq@ttqIf+VzGeh)1<9*0DRpj7gsLh32fI*WsUfiSIf zLBhSL{fZLf?$UiK{q&?)9k8<;;80a%Twk5EDyt`u^u4VDXA=2(mFwLj%^N?A1{R2@ zez0>VQrFa?DYHvksXt-IBdzpxVF=HXx12{Vg}0Ev$77y8%QP@uw*bgQn}+_NUtvb+ zP}GtWo09BXFR7p2(VjphHO4cUx{Gk^*NTabU4uSPO>PA@PHSlJA6@ECmrSoV$YCi6 zyU7A|(fB3ZhvWnLjVmu3r_PQWAUPj|Ai~{JHqd*(N7QCme3DBo_>R6IR2h=JeaPAe z8da3W53>8diYe^wWJVc$X%7&2<;X;OP~C9Ip_P6p^LA~5668=F4#A{2WVvIB^`{5^rcSJF@W zJWsSXM!f^ou_Jb=rR?ZVvC`m@PFrWJHm7B@5=oOrl9+Hp!W3OB}oYmtBwxa zj_lTtEjv}BZJxd?I5sln5+9x8)k#hEbGwtKFlPc0#~Mm(q7(R}YP??;oxuaA-Gb;Y zy#jV}GIp2-{s1j%I683!PdSrmWB2tv}5o z_0L2)sf<5;lAFo*C9eUt<4^Y^Lp;ix=J-2kS)Ov5J&RCu=IsbwR+Z3ukGLG|_qnD0 zQq9$NXy0C@XMt8I@AQ(j92Ml;i~4$D_@7;{RS-VZnGGFdamw19H0$&7o$ZEf_iywg z4zwmbqc`})T;*Am2#7@BMr=eK2a!z13i4ym`(Tq)CH`B1EX(E-BPop- zm){dgK-jXmZlEE$X(1Q~t5!SB_oA__W16E&xK9}_P{}(aNT~$B*VC$TE$O@ZFr;IGIHmT_oabOy$B#9?&7L)7kiO?LQK8uuX8kTPOViYe zk9BLpR3oaN?f7plx9u7C8P`j@6s36QepQi)0R{~#G)Igi5Pub_h+A|!JfX26a#7FN z^4`^{i0b`Vp%l+t+ZJ1_%{W^slHwaTomQD`4A+v??BfkDnd5}@DXw#Vw4n%(<>LaT zYh|Z_T-mf5lWQG#fXi8{jdHzAI1o+HUo4Be;}0;cc^H=OhvDGELP$7+l|jwqcUtw* zJUpWjc&F@aL-#iBN0~s)N{F3aLnA7`&z|=%A>wI;Y+M=m+M+JQ92a;a*qKb1wcQ>) zPAOyy2gY#~KK^uYLcs?M{>wxk(I-c5?2yM-XKLOHFJzGKAyhF|J#1K9c#&XWRIQgW z1bP?8e7BRp`Prz6!8I%aHLW?5ezDj~`>&V;t55+64ahNlxUN237=5yz0TSDgK_6i*SEnTBP#&5)bG1G)23ghF*|`VUBs|y) zdBTp4h;+f4ie**6Reyrh#pl3&6k$;0ft`vDn-%r%UP^xo8cSH0d~yl=%YU* z6QkEu2cK3S$=Q3ZnN#jGb;_cGJAN?e$p9<%D5ZRIzs(zq-K2OEud8{R^DBAjdpzg- z5LsBw&eYGF&)je2W~4}s6sFe6buC}v*{{{s@Y>`qS34BvEN)NMQilt4aiN4`gh#u0 zt8(3OM{2RM?9@a63j29n!!0q}o|DB=nANw*A$M zWMZI8l#j*qkyvZys`hlzGXAI&QjjxQj`tH}{LwA4^)@1yWdAzU=wBt+G<(A=@6XD5 zXOOzz$F^S$Esfa%{4n1r?N`3ew_69H%6Or&8km1E0$z0;#+&te`*TCUjU?-|GoQ$f z>ARpGFxaC^nk)6vgM-qpcKs`(1Xgzx%|vtyyZ4i7sR4r#_tdSKlYQ-UCK5eKS&+_G z_T*UP^uL*@4VLZ~IOrltlO;_zPqGxMeku{cJup=Qd^HZ%ssgn?3?V-YHf2%0nx(|NF=ypnz zWpzBHsgKq!!sY$NlyQYdr`BiR+CgE?r1=b-tPJ<7BAT6+eh5tnjTKrijW@LT{X2Rq zZuQb(ej#V2ISo}+XATZKZ??a;R57yAD>&|64(q5T$;dwz(dLF_GRzgv^SRUXQ_II6 zdn#$G!3-urA^Y*GcZ7~8g*#FpFoYh`_S=lVen#Hj7na9AozklrAfE0!kZ2n8V>x+K zX$bGs&t;IVE39=D7i;t{%5%axlkZofs()WwOJQLt`xy$#(=v($Mtd-y>2CW(kl&Dv zeJC7>eAAfTv-}JA`?z5ayBsWowVVm`uI$XRdlB(=O2GAHeJBT8$;n2Ksi_i>rL_z| zY4Sknp_1cRAP4#jvgC8|X&@7tWWbD`B{ADPsv%B_%!5SG*i4Z;Q5h%k69I1YUH2au z{;^Y;+ImeU`_|_= zLKtt+E3d^Yj$9m&%37Ve52>%y(^;?P=BS)4cv0ru6)kE4`<&-u5LNl&UxHT85%;9; zz@lNc0eoJ%P83=EEkWnTM9Z3gN(Qfwvlo4e7;_C)plz3~cM|S(G9rqNjR11GppxqV+qxrW|&Q@densO1r|l z@MK?Nh5x#ECq#yjoWCZ&c{0os!estdv@)B&Kg(nZ zQcP3t9RM|6E5ko*pe0bETCuz+dQpO;TX@`>I^oVDGTGg_Q1Y~vyE5qoz=gRh6H_Qt zl|5aO-t*PnyGB@pxL?)?m@W=o(y6yBS~3vUZc9sbx(C3RaPDFyFTc_&nn!#7lY%{47`<(3P{1%rwaZ}Hz)-W(!eDMW~@5F=z zoQF^oO@W!Y2Q;yzP6&@zvhk|I2cczbx}|htXTK+cgFu6Dmz1iV^gOm-jSz49szP#Q zCLT$aWY4_ji|u`rGml|OMG0%nsEA#}SaO=-37o8YqV!nl`Oj?c8<0@IL_S%-?vCZ5&9CL3o$D}OR+|3xn+-J_2BSp**CCr)I9MzP1kV>T*CAvqh zNFkM;R8y4a>8(da^*lX~-uM0C^9Ou9y*%vf8|wuUPu3@j5?jM^WwNn`<{rbP4XKIs7)0lHDtcyd04> z`K+``&meO9#3~&gvka28^AdwR)ZMIjlkh6>Wzm+9PnZXlr@p0e=M> zQ#%(s6FZuw9Vt#<-+)Mh=q@gFG@44aQBa6-snm#mg^Ad2YC9>TmW<_1(VU#fPKHiH zcJll@x4;bab-eK&aYRHyTVtZ#r=co5W292?LAI|*5?IEnC1fmCRsu+bV3}j&I-68x z0pT}`4Pj)-wnoaRO_>y5vZ;(z^bWipj9k5V0NGrBMJsT5qRHeOVXv4tBm^N$nVkuf zS+9$ubpP?Wv$Rx2PbosY))CncA&32BnV?5Qx}nz*HP26nR8U1aG_LUQn4)$iQi-PI zjjIFIvj5d{ilD8av6Nj$oLWnsASw-1xeV}w5TS(QKgGsN{+RhaMTQX(k!9Mpf)6N% z?38obUjxKfH@?b8s!Z5R#3Z+S3QCThe@%#7D-^Zm4rI48hFo*yc1@pTrC-Yzti4R? ziRisouBdFeFU5{46IT3fPU|_OuUAq0>(_LyP!Vd|D9IJtNS|{Z_~S99BIgvOU}`#G zSjqgVbXcIZ$(>nLFe?*-@>(qc%qmK>m{g&gvH;0x9GigTbOPw56;`VQOr_YB_F)CB zZV^~9b$g*$p!4S-B(E_xaIesjD;feVQU(`M>mRvN6`*|$U11~=byjNxd3K8D>)0o% z=w@{I7`1bMN4fd607&uAQ6i<;_}KoX8uhUh-ftwoTxsL@?up{ucY4ofy z{u!}Vn(P&-ZIW1eMu*$ZRO-6KC(G+dWK1~^v$L+K59ffFXL~*|{_HlJ;IE>171Vd) z?7r$~#T32kq~2HM&&W+y{53X?NbAB_lIHm(kg@ymy>2G8ZhrmpRQ^TgA{m}n-F$M) zht*FMzX)*K5zSKwbbFw48Pn`?;jcUYe*0jdW*#GTQ?*kYK|nDpv|;l5FRAxzT`=nw zcYay&@418PLg5g5K~w@*)3{X_n{`;qi7eY!^m|7hu#+-NP4tn`9 z(+u5PTBZ6AqMhyjYEwEFf3Dk7aEF!F@d#PScsT+oJIP7`EE{o$r-O1k#aP=?ZG z?YuH%trZwT;_Jl251q3~OeJIz|WFrNi^ccIgbSULwDB@3pp14ojIdX)zgi$^NcbvUsY{w^PFA7mAz;nP%NIs{rSLvoeLfb6*nax=24!*`I&kedNDDzB2*@{`Od>QMK( zwXu4yR5b2DsjAGo@Fy_Iq-sA2um91;w8VN6z8F@~L}WQ9nYql1*wNBwl^JsFu zF3+YjuCd#13T!-?xZ)jmf7N{a7)bD?7-O6dRi^TW8i`tGu*znfT&S@{WSU#jz?1&o&X{+N)}p6qLZKdzp{-)Ki3t0o_T=nNE@8+8UL*0A_J2Dsg^1_y-`)`4nbqtEZDpFvf4V);OET3 zWE-X!b&IPW=L{j3X2mI84A5cK1O8olSz>z;biAoO3lTNykQ%A#1Szafdpf9)gFp^4 zpr-0WXO_-Ds@+08-5NyrT04L+m7nsba{$76egf;~|S~dwM#3 zEcFsXHoPg9Ar4V^gb~NI)d=y69txHTf4X~U11^b)IeRZWQ`K$~rFV3pSA+{YSBS;^ z1RyWU5fN|CYuwnkv`s6pO)a8R^}15efaXQ7l>oZa``FN|G#_Zy7?5aKDX*w%!nx;f~R>qV~AHE;zv z*Z1hH)j}xr*+=AioPe_7<&Ui;BZ_(Y{$xORn&obHeC1`p>iE|G_PXVj2A=>3Gr(qK zh?FL$5#cf)MNhxAR#fyb#=8)>jf_8S)-pR{9Ggb~1GrXAOV(WAp4Pkm{>Nf0Cp3U| z>@kfyi{Y++Nk=>Pa2`E}I(+vY>`RL)RXsSBAB%_>Z_a%V&`p>0a4OyHs2r(tV79-a zvfGi!Q=W-MODd(?>TU=ih*5Pd#<{B!b$sG)&BTeqLWsF zimFyo1=d~1@@~DxYTIAF{EXPqjM|d!UYl_OIHxe3Vy|t{DO$ENXx%(ySwB3C)zB+9 zU$eG?XLoWB*}9zQeZ+uwL^d1&D0=6Esr4#@)hI0)Fce)-Iy!esy*{aju+ucG3j%<` z{ii%*QUV%zWONi`)a`uAPOAw2Ly7YKq)?OKt=%SaU+#li!V~t6#Nsjf9p8UetC=Px z577(w6Q@0k8^WXg%F#A#=hNrH!^_m_BeOfL?~i*}SRRyjSBE9Uz%Qa30fI!;Gd3}7 zr&TOZ9iKPKDiHMQq)4woMy9q%LE``&Yy6_CgLkC+d(f^RV=v-)*MHFL_jmE_3(Mc} z<)&`Qt#<^+7Cd?O)y%fTh}(17`vmzlUF1Kp2#+vHI$wZy+s(U1K(HIZNu=Hh^5M*TZm3Z_67%mifjT_%(3bt3+*sAvnE^kfX&>NTh=BSon;|v`g(kp9ORiyGXJ?NKt9Ld#fY!A z1VnKwKg}{a=^jtl4fF?mkJE_Hy3#+z1N!gxe_5w~%{2bn;(KzKdW=W7fYY{KbFF=r zk$#oAl@HWM}ENLK8>O(`QAb?!nd zJO(IePY}F?<3uod297Y=y^|j-eH;CDl{Se9`8kZ6!GvlA(grsaqF3PDP_*W~Ks#Zi zzceW8b5H{&ok_FO?69K#z?{hf^V|TBa)8qgnDV3dVH-n*v{6k>Lm^xj5FJCK(bpPA zN0ATs;T4$B5IpZE8N+9ok!A4TPwbN!urmWz-rZz~0pds~C29kEO=;g!^IAFlkH`{B zwe5SX6eN$_#4;K(MV2fo58EEWS5JzdLh6l{kUWwa0Mev@@_uCUM*S=wClADCw1!&H zAe0oQOX|HbU~4E?`_4X~JWSUfd6gEnliOtd7Vhr_92l@F*X6%HKwQ2PVu-x}u&-aP z<+-h`)U9S%J4mR|I;!yVhy2BJ054ScXCI(6V|^Y2#T|xX84-%5A>5VSzE+mw?Q%Ir zfUSJoz2|@?7bI~NVR;w~0PH0&M66k@L?nk=TWDbigB3U|8}Vo!9n&msR}4!&98LqI zZ^MD!(g~$+!$#tzk=GKEH{3SWh8yi}Au&l_ z^|ud0&7tt6gp*+sM{yQd6&Dj1i5$C76>I#${qNJD;I*Gvwe<7G{H zhfnxRanTGr0IL#Lg;4v3e6Ak3r``6Ex~&Zt-yuWV%QW->XrW!XQ)8E5yu%n3T--<@ z-ase>#F!<=T=^Os1c00z%eeRk7?0Izj5`^OHq@Y_h7xjTkKd7j8f)N@JlGf$q#uaY z1mmBC?s=DU+M648`wy(BIeuJdh57>`4Gr`sy{V*O7 zUwI4*NE+m|nA1;{$E;M4A*c2Q+lDv_q`naD^+13O;RRIj@ocg|@#l5nx?t6H*cB1@()y>d4EuwsL;HH%@fsE`C`=$=ln z&nd;{T#LH7p?tamh-kb7P;>|J>dkYG&Rj5G*qgs*_aSLd_mPBelWKmAc$R|hM1tBm z2VeH~-O}xkYW$c^zQ$> z%8LMKf&&tCj26R(rMUwQE*kAZA?Q92p19XYF5ceWWvFV+Y0{~tF z!G?U^0Y|h)pu!ETv%2V#cu(T`9=C^AqRtrMoKf+4+noHrq(UvRI@}4SfsJ>nRyii>SUCxAY+DU8!T-Uvp!E}1A`dhal zWlt?ViViU$3k4kW66Q=S0p<)nEzcYpA9zAy9hdBOuVv`0Pf$|yWuLut+s7*64Zgb? z1zwf+?}N#VoL`&0_w-G&jFvsj#%~*kXUL`iE(gKJ<)3)AFOot&@Wd&mfkf z?v#bZGpw^r7s_i!09T+Aj&*TqABl*VvJmPPjucI*8TI1G&pCQ01qR2$HRKo`+eE$; zneQJS751xM?9MHLU7$0==w=#X@0_p#v4up=EB&r3!WF$bO46C*T<8PSa0d(B^&Cp( zHwU1iF9YE8@cyX|176wO77VaO3eRmfivGA|76dYh8hTVj1CwGw$ZyRxh+St*pevsxV9$f(k^y~+s4QJTA_N>9qvy4)8&5Ome2*T~6ZkAGYX{IIYh+bgMrY{@nwNXxjxg|0!i-1gZ6F^^i+4Cgx_qnWaXe~Xwc zUYg@YBPYCD%Q&xg74Dw%*06hWxj;CYSV-Y}Y5vC=6nG52pU-9&xnJFcBFF_PfwT96 zSoLq_FAZ9ZEEn8JG%mDUXg&lk={-}mJ5=Cna{48dd$CaUB)L47eSf_8+kpO45=T|9 zxW=g9K_5x+j)ms%6U3AJ+h4q|Q*x%(jVUD@Dy}4qY+4=SuHSTEtc8!919brX)abhFc!k^ch^tCh5%;9?5-CpS#4a*FCAJ zXP?J-hJUsJx%LA;jC6^rZ60&YDE67{*5(~!7OSCQj=hqwqW>ywB5p~+# zUn34oW0`%mIWpU~K4;d-2iA^GbUmJ| V9|w>FnA)HW1c~_VCk_EP{x9Pz_gw%0 literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/html/images/warning.gif b/src/SDL2/external/tiff-4.0.3/html/images/warning.gif new file mode 100644 index 0000000000000000000000000000000000000000..f51eb4b1a7b7f392b183e183ec2d93aab7d3090b GIT binary patch literal 287 zcmV+)0pR{eNk%w1VJHA70P+9;=jZ2cZf?H5zWe|H{{R300000000000A^8LW00062 zEC2ui04M+`000Bz2)f+N_DFSAmXsV{#*oJWIwOJ|OFii%yF#J7% z?sfYSfViQp$QksMJQ>pGyg`|rs_Ys=7BN zq^_xzt7fP!iL*hxLbX0Icy*7uWw0Hxn;d(N$#=tpw8qOJ%GF%XpIE=t$i1gmKjY-( l=I2P+= + + + LibTIFF - TIFF Library and Utilities + + + + + +

    LibTIFF - TIFF Library and Utilities

    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    Home Pagehttp://www.remotesensing.org/libtiff/
    Home Page Mirrorhttp://libtiff.maptools.org/
    Latest Stable Releasev4.0.3
    Master Download Sitedownload.osgeo.org, directory libtiff
    Windows BinariesGnuWin32 Project
    Mailing Listtiff@lists.maptools.org, + Subscription, + Archive. + Please, read the TIFF FAQ + before asking questions.
    Anonymous CVSexport CVSROOT=:pserver:cvsanon@cvs.maptools.org:/cvs/maptools/cvsroot
    + cvs login
    + (use empty password)
    + cvs checkout libtiff
     + to get the stable libtiff code or
    + cvs checkout -r branch-3-9 libtiff
    + to get the previous stable branch supporting the 3.9.X release series.
    +
    +

    + This software provides support for the Tag Image File Format (TIFF), + a widely used format for storing image data. The latest version of + the TIFF specification is available on-line + in several different formats. +

    +

    + Included in this software distribution is a library, libtiff, for + reading and writing TIFF, a small collection of tools for doing + simple manipulations of TIFF images, and documentation on the + library and tools. Libtiff is a portable software, it was built + and tested on various systems: UNIX flavors (Linux, BSD, Solaris, + MacOS X), Windows, and OpenVMS. It should be possible to port + libtiff and additional tools on other OSes. +

    +

    + The library, along with associated tool programs, should handle most of + your needs for reading and writing TIFF images on 32- and 64-bit + machines. +

    +

    + The software was originally authored and maintained by Sam Leffler. +

    +

    + Questions should be sent to the TIFF mailing list: + tiff@lists.maptools.org, with + a subscription interface at + http://lists.maptools.org/mailman/listinfo/tiff. +

    +

    + The persons responsible for putting up this site and putting together + versions >= 3.5.1 are + Frank Warmerdam, + Andrey Kiselev, + Bob Friesenhahn, + Joris Van Damme and Lee Howard. +

    +

    + The following sections are included in this documentation: +

    + +

    + BigTIFF News +

    + +
    +

    + Last updated $Date: 2012-06-16 00:19:37 $. +

    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/internals.html b/src/SDL2/external/tiff-4.0.3/html/internals.html new file mode 100644 index 000000000..3cc967312 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/internals.html @@ -0,0 +1,572 @@ + + + +Modifying The TIFF Library + + + + +

    + +Modifying The TIFF Library +

    + + +

    +This chapter provides information about the internal structure of +the library, how to control the configuration when building it, and +how to add new support to the library. +The following sections are found in this chapter: + +

    + + +

    Library Configuration

     + +Information on compiling the library is given +elsewhere in this documentation. +This section describes the low-level mechanisms used to control +the optional parts of the library that are configured at build +time. Control is based on +a collection of C defines that are specified either on the compiler +command line or in a configuration file such as port.h +(as generated by the configure script for UNIX systems) +or tiffconf.h. + +

    +Configuration defines are split into three areas: +

      +
    • those that control which compression schemes are + configured as part of the builtin codecs, +
    • those that control support for groups of tags that + are considered optional, and +
    • those that control operating system or machine-specific support. +
    + +

    +If the define COMPRESSION_SUPPORT is not defined +then a default set of compression schemes is automatically +configured: +

      +
    • CCITT Group 3 and 4 algorithms (compression codes 2, 3, 4, and 32771), +
    • the Macintosh PackBits algorithm (compression 32773), +
    • a 4-bit run-length encoding scheme from ThunderScan (compression 32809), +
    • a 2-bit encoding scheme used by NeXT (compression 32766), and +
    • two experimental schemes intended for images with high dynamic range +(compression 34676 and 34677). +
    + +

    + +To override the default compression behaviour define +COMPRESSION_SUPPORT and then one or more additional defines +to enable configuration of the appropriate codecs (see the table +below); e.g. + +

      +#define	COMPRESSION_SUPPORT
+#define	CCITT_SUPPORT
+#define	PACKBITS_SUPPORT
+
    + +Several other compression schemes are configured separately from +the default set because they depend on ancillary software +packages that are not distributed with libtiff. + +

    +Support for JPEG compression is controlled by JPEG_SUPPORT. +The JPEG codec that comes with libtiff is designed for +use with release 5 or later of the Independent JPEG Group's freely +available software distribution. +This software can be retrieved from the directory +ftp.uu.net:/graphics/jpeg/. + + +

    +NOTE: +Enabling JPEG support automatically enables support for +the TIFF 6.0 colorimetry and YCbCr-related tags. + +

    +Experimental support for the deflate algorithm is controlled by +DEFLATE_SUPPORT. +The deflate codec that comes with libtiff is designed +for use with version 0.99 or later of the freely available +libz library written by Jean-loup Gailly and Mark Adler. +The data format used by this library is described +in the files +zlib-3.1.doc, +and +deflate-1.1.doc, +available in the directory +ftp.uu.net:/pub/archiving/zip/doc. +The library can be retried from the directory +ftp.uu.net:/pub/archiving/zip/zlib/ +(or try quest.jpl.nasa.gov:/beta/zlib/). + +

    +NOTE: +The deflate algorithm is experimental. Do not expect +to exchange files using this compression scheme; +it is included only because the similar, and more common, +LZW algorithm is claimed to be governed by licensing restrictions. + + +

    +By default tiffconf.h defines +COLORIMETRY_SUPPORT, +YCBCR_SUPPORT, +and +CMYK_SUPPORT. + +

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    DefineDescription
    CCITT_SUPPORTCCITT Group 3 and 4 algorithms (compression codes 2, 3, 4, + and 32771)
    PACKBITS_SUPPORTMacintosh PackBits algorithm (compression 32773)
    LZW_SUPPORTLempel-Ziv & Welch (LZW) algorithm (compression 5)
    THUNDER_SUPPORT4-bit +run-length encoding scheme from ThunderScan (compression 32809)
    NEXT_SUPPORT2-bit encoding scheme used by NeXT (compression 32766)
    OJPEG_SUPPORTobsolete JPEG scheme defined in the 6.0 spec (compression 6)
    JPEG_SUPPORTcurrent JPEG scheme defined in TTN2 (compression 7)
    ZIP_SUPPORTexperimental Deflate scheme (compression 32946)
    PIXARLOG_SUPPORTPixar's compression scheme for high-resolution color images (compression 32909)
    SGILOG_SUPPORTSGI's compression scheme for high-resolution color images (compression 34676 and 34677)
    COLORIMETRY_SUPPORTsupport for the TIFF 6.0 colorimetry tags
    YCBCR_SUPPORTsupport for the TIFF 6.0 YCbCr-related tags
    CMYK_SUPPORTsupport for the TIFF 6.0 CMYK-related tags
    ICC_SUPPORTsupport for the ICC Profile tag; see +The ICC Profile Format Specification, +Annex B.3 "Embedding ICC Profiles in TIFF Files"; +available at +http://www.color.org +
    + + +

    General Portability Comments

    + +This software is developed on Silicon Graphics UNIX +systems (big-endian, MIPS CPU, 32-bit ints, +IEEE floating point). +The configure shell script generates the appropriate +include files and make files for UNIX systems. +Makefiles exist for non-UNIX platforms that the +code runs on -- this work has mostly been done by other people. + +

    +In general, the code is guaranteed to work only on SGI machines. +In practice it is highly portable to any 32-bit or 64-bit system and much +work has been done to insure portability to 16-bit systems. +If you encounter portability problems please return fixes so +that future distributions can be improved. + +

    +The software is written to assume an ANSI C compilation environment. +If your compiler does not support ANSI function prototypes, const, +and <stdarg.h> then you will have to make modifications to the +software. In the past I have tried to support compilers without const +and systems without <stdarg.h>, but I am +no longer interested in these +antiquated environments. With the general availability of +the freely available GCC compiler, I +see no reason to incorporate modifications to the software for these +purposes. + +

    +An effort has been made to isolate as many of the +operating system-dependencies +as possible in two files: tiffcomp.h and +libtiff/tif_<os>.c. The latter file contains +operating system-specific routines to do I/O and I/O-related operations. +The UNIX (tif_unix.c), +Macintosh (tif_apple.c), +and VMS (tif_vms.c) +code has had the most use; +the MS/DOS support (tif_msdos.c) assumes +some level of UNIX system call emulation (i.e. +open, +read, +write, +fstat, +malloc, +free). + +

    +Native CPU byte order is determined on the fly by +the library and does not need to be specified. +The HOST_FILLORDER and HOST_BIGENDIAN +definitions are not currently used, but may be employed by +codecs for optimization purposes. + +

    +The following defines control general portability: + +

    + + + + + + + + + + + + + + + + + + + + + + + + + + +
    BSDTYPESDefine this if your system does NOT define the + usual BSD typedefs: u_char, + u_short, u_int, u_long.
    HAVE_IEEEFPDefine this as 0 or 1 according to the floating point + format suported by the machine. If your machine does + not support IEEE floating point then you will need to + add support to tif_machdep.c to convert between the + native format and IEEE format.
    HAVE_MMAPDefine this if there is mmap-style support for +mapping files into memory (used only to read data).
    HOST_FILLORDERDefine the native CPU bit order: one of FILLORDER_MSB2LSB + or FILLORDER_LSB2MSB
    HOST_BIGENDIANDefine the native CPU byte order: 1 if big-endian (Motorola) + or 0 if little-endian (Intel); this may be used + in codecs to optimize code
    + +

    +On UNIX systems HAVE_MMAP is defined through the running of +the configure script; otherwise support for memory-mapped +files is disabled. +Note that tiffcomp.h defines HAVE_IEEEFP to be +1 (BSDTYPES is not defined). + + +

    Types and Portability

    + +The software makes extensive use of C typedefs to promote portability. +Two sets of typedefs are used, one for communication with clients +of the library and one for internal data structures and parsing of the +TIFF format. There are interactions between these two to be careful +of, but for the most part you should be able to deal with portability +purely by fiddling with the following machine-dependent typedefs: + + +

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    uint88-bit unsigned integertiff.h
    int88-bit signed integertiff.h
    uint1616-bit unsigned integertiff.h
    int1616-bit signed integertiff.h
    uint3232-bit unsigned integertiff.h
    int3232-bit signed integertiff.h
    dblparam_tpromoted type for floatstiffcomp.h
    + +

    +(to clarify dblparam_t, it is the type that float parameters are +promoted to when passed by value in a function call.) + +

    +The following typedefs are used throughout the library and interfaces +to refer to certain objects whose size is dependent on the TIFF image +structure: + + +

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    typedef unsigned int ttag_t; directory tag
    typedef uint16 tdir_t; directory index
    typedef uint16 tsample_t; sample number
    typedef uint32 tstrip_t; strip number
    typedef uint32 ttile_t; tile number
    typedef int32 tsize_t; i/o size in bytes
    typedef void* tdata_t; image data ref
    typedef void* thandle_t; client data handle
    typedef int32 toff_t; file offset (should be off_t)
    typedef unsigned char* tidata_t; internal image data
    + +

    +Note that tstrip_t, ttile_t, and tsize_t +are constrained to be +no more than 32-bit quantities by 32-bit fields they are stored +in in the TIFF image. Likewise tsample_t is limited by the 16-bit +field used to store the SamplesPerPixel tag. tdir_t +constrains +the maximum number of IFDs that may appear in an image and may +be an arbitrary size (without penalty). ttag_t must be either +int, unsigned int, pointer, or double +because the library uses a varargs +interface and ANSI C restricts the type of the parameter before an +ellipsis to be a promoted type. toff_t is defined as +int32 because +TIFF file offsets are (unsigned) 32-bit quantities. A signed +value is used because some interfaces return -1 on error (sigh). +Finally, note that tidata_t is used internally to the library to +manipulate internal data. User-specified data references are +passed as opaque handles and only cast at the lowest layers where +their type is presumed. + + +

    General Comments

    + +The library is designed to hide as much of the details of TIFF from +applications as +possible. In particular, TIFF directories are read in their entirety +into an internal format. Only the tags known by the library are +available to a user and certain tag data may be maintained that a user +does not care about (e.g. transfer function tables). + +

    Adding New Builtin Codecs

     + +To add builtin support for a new compression algorithm, you can either +use the "tag-extension" trick to override the handling of the +TIFF Compression tag (see Adding New Tags), +or do the following to add support directly to the core library: + +
      +
    1. Define the tag value in tiff.h. +
    2. Edit the file tif_codec.c to add an entry to the + _TIFFBuiltinCODECS array (see how other algorithms are handled). +
    3. Add the appropriate function prototype declaration to + tiffiop.h (close to the bottom). +
    4. Create a file with the compression scheme code, by convention files + are named tif_*.c (except perhaps on some systems where the + tif_ prefix pushes some filenames over 14 chars. +
    5. Edit Makefile.in (and any other Makefiles) + to include the new source file. +
    + +

    +A codec, say foo, can have many different entry points: + +

    +TIFFInitfoo(tif, scheme)/* initialize scheme and setup entry points in tif */
+fooSetupDecode(tif)	/* called once per IFD after tags has been frozen */
+fooPreDecode(tif, sample)/* called once per strip/tile, after data is read,
+			    but before the first row is decoded */
+fooDecode*(tif, bp, cc, sample)/* decode cc bytes of data into the buffer */
+    fooDecodeRow(...)	/* called to decode a single scanline */
+    fooDecodeStrip(...)	/* called to decode an entire strip */
+    fooDecodeTile(...)	/* called to decode an entire tile */
+fooSetupEncode(tif)	/* called once per IFD after tags has been frozen */
+fooPreEncode(tif, sample)/* called once per strip/tile, before the first row in
+			    a strip/tile is encoded */
+fooEncode*(tif, bp, cc, sample)/* encode cc bytes of user data (bp) */
+    fooEncodeRow(...)	/* called to decode a single scanline */
+    fooEncodeStrip(...)	/* called to decode an entire strip */
+    fooEncodeTile(...)	/* called to decode an entire tile */
+fooPostEncode(tif)	/* called once per strip/tile, just before data is written */
+fooSeek(tif, row)	/* seek forwards row scanlines from the beginning
+			   of a strip (row will always be >0 and <rows/strip */
+fooCleanup(tif)		/* called when compression scheme is replaced by user */
+
    + +

    +Note that the encoding and decoding variants are only needed when +a compression algorithm is dependent on the structure of the data. +For example, Group 3 2D encoding and decoding maintains a reference +scanline. The sample parameter identifies which sample is to be +encoded or decoded if the image is organized with PlanarConfig=2 +(separate planes). This is important for algorithms such as JPEG. +If PlanarConfig=1 (interleaved), then sample will always be 0. + +

    Other Comments

    + +The library handles most I/O buffering. There are two data buffers +when decoding data: a raw data buffer that holds all the data in a +strip, and a user-supplied scanline buffer that compression schemes +place decoded data into. When encoding data the data in the +user-supplied scanline buffer is encoded into the raw data buffer (from +where it is written). Decoding routines should never have to explicitly +read data -- a full strip/tile's worth of raw data is read and scanlines +never cross strip boundaries. Encoding routines must be cognizant of +the raw data buffer size and call TIFFFlushData1() when necessary. +Note that any pending data is automatically flushed when a new strip/tile is +started, so there's no need do that in the tif_postencode routine (if +one exists). Bit order is automatically handled by the library when +a raw strip or tile is filled. If the decoded samples are interpreted +by the decoding routine before they are passed back to the user, then +the decoding logic must handle byte-swapping by overriding the +tif_postdecode +routine (set it to TIFFNoPostDecode) and doing the required work +internally. For an example of doing this look at the horizontal +differencing code in the routines in tif_predict.c. + +

    +The variables tif_rawcc, tif_rawdata, and +tif_rawcp in a TIFF structure +are associated with the raw data buffer. tif_rawcc must be non-zero +for the library to automatically flush data. The variable +tif_scanlinesize is the size a user's scanline buffer should be. The +variable tif_tilesize is the size of a tile for tiled images. This +should not normally be used by compression routines, except where it +relates to the compression algorithm. That is, the cc parameter to the +tif_decode* and tif_encode* +routines should be used in terminating +decompression/compression. This ensures these routines can be used, +for example, to decode/encode entire strips of data. + +

    +In general, if you have a new compression algorithm to add, work from +the code for an existing routine. In particular, +tif_dumpmode.c +has the trivial code for the "nil" compression scheme, +tif_packbits.c is a +simple byte-oriented scheme that has to watch out for buffer +boundaries, and tif_lzw.c has the LZW scheme that has the most +complexity -- it tracks the buffer boundary at a bit level. +Of course, using a private compression scheme (or private tags) limits +the portability of your TIFF files. + +

    +

    + +Last updated: $Date: 2004/09/10 14:47:31 $ + + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/intro.html b/src/SDL2/external/tiff-4.0.3/html/intro.html new file mode 100644 index 000000000..61c01d4a2 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/intro.html @@ -0,0 +1,68 @@ + + + +Introduction to the TIFF Documentation + + + + +

    + +Introduction to the TIFF Documentation +

    + + +

    +The following definitions are used throughout this documentation. +They are consistent with the terminology used in the TIFF 6.0 specification. + +

    +
    Sample +
    The unit of information stored in an image; often called a + channel elsewhere. Sample values are numbers, usually unsigned + integers, but possibly in some other format if the SampleFormat + tag is specified in a TIFF +
    Pixel +
    A collection of one or more samples that go together. +
    Row +
    An Nx1 rectangular collection of pixels. +
    Tile +
    An NxM rectangular organization of data (or pixels). +
    Strip +
    A tile whose width is the full image width. +
    Compression +
    A scheme by which pixel or sample data are stored in + an encoded form, specifically with the intent of reducing the + storage cost. +
    Codec +
    Software that implements the decoding and encoding algorithms + of a compression scheme. + + +

    +In order to better understand how TIFF works (and consequently this +software) it is important to recognize the distinction between the +physical organization of image data as it is stored in a TIFF and how +the data is interpreted and manipulated as pixels in an image. TIFF +supports a wide variety of storage and data compression schemes that +can be used to optimize retrieval time and/or minimize storage space. +These on-disk formats are independent of the image characteristics; it +is the responsibility of the TIFF reader to process the on-disk storage +into an in-memory format suitable for an application. Furthermore, it +is the responsibility of the application to properly interpret the +visual characteristics of the image data. TIFF defines a framework for +specifying the on-disk storage format and image characteristics with +few restrictions. This permits significant complexity that can be +daunting. Good applications that handle TIFF work by handling as wide +a range of storage formats as possible, while constraining the +acceptable image characteristics to those that make sense for the +application. + + +

    +

    + +Last updated: $Date: 1999/08/09 20:21:21 $ + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/libtiff.html b/src/SDL2/external/tiff-4.0.3/html/libtiff.html new file mode 100644 index 000000000..6a2c42e60 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/libtiff.html @@ -0,0 +1,747 @@ + + + + Using The TIFF Library + + + + + + + + + + +
    +

    Using The TIFF Library

    +

    + libtiff is a set of C functions (a library) that support + the manipulation of TIFF image files. + The library requires an ANSI C compilation environment for building + and presumes an ANSI C environment for use. +

    +
    +
    +

    + libtiff + provides interfaces to image data at several layers of abstraction (and cost). + At the highest level image data can be read into an 8-bit/sample, + ABGR pixel raster format without regard for the underlying data organization, + colorspace, or compression scheme. Below this high-level interface + the library provides scanline-, strip-, and tile-oriented interfaces that + return data decompressed but otherwise untransformed. These interfaces + require that the application first identify the organization of stored + data and select either a strip-based or tile-based API for manipulating + data. At the lowest level the library + provides access to the raw uncompressed strips or tiles, + returning the data exactly as it appears in the file. +

    +

    + The material presented in this chapter is a basic introduction + to the capabilities of the library; it is not an attempt to describe + everything a developer needs to know about the library or about TIFF. + Detailed information on the interfaces to the library are given in + the UNIX + manual pages that accompany this software. +

    +

    + Michael Still has also written a useful introduction to libtiff for the + IBM DeveloperWorks site available at + http://www.ibm.com/developerworks/linux/library/l-libtiff. +

    +

    + The following sections are found in this chapter: +

    + +
    +

    How to tell which version you have

    +

    + The software version can be found by looking at the file named + VERSION + that is located at the top of the source tree; the precise alpha number + is given in the file dist/tiff.alpha. + If you have need to refer to this + specific software, you should identify it as: +

    +

    + TIFF <version> <alpha> +

    +

    + where <version> is whatever you get from + "cat VERSION" and <alpha> is + what you get from "cat dist/tiff.alpha". +

    +

    + Within an application that uses libtiff the TIFFGetVersion + routine will return a pointer to a string that contains software version + information. + The library include file <tiffio.h> contains a C pre-processor + define TIFFLIB_VERSION that can be used to check library + version compatiblity at compile time. +

    +
    +

    Library Datatypes

    +

    + libtiff defines a portable programming interface through the + use of a set of C type definitions. + These definitions, defined in in the files tiff.h and + tiffio.h, + isolate the libtiff API from the characteristics + of the underlying machine. + To insure portable code and correct operation, applications that use + libtiff should use the typedefs and follow the function + prototypes for the library API. +

    +
    +

    Memory Management

    +

    + libtiff uses a machine-specific set of routines for managing + dynamically allocated memory. + _TIFFmalloc, _TIFFrealloc, and _TIFFfree + mimic the normal ANSI C routines. + Any dynamically allocated memory that is to be passed into the library + should be allocated using these interfaces in order to insure pointer + compatibility on machines with a segmented architecture. + (On 32-bit UNIX systems these routines just call the normal malloc, + realloc, and free routines in the C library.) +

    +

    + To deal with segmented pointer issues libtiff also provides + _TIFFmemcpy, _TIFFmemset, and _TIFFmemmove + routines that mimic the equivalent ANSI C routines, but that are + intended for use with memory allocated through _TIFFmalloc + and _TIFFrealloc. +

    +
    +

    Error Handling

    +

    + libtiff handles most errors by returning an invalid/erroneous + value when returning from a function call. + Various diagnostic messages may also be generated by the library. + All error messages are directed to a single global error handler + routine that can be specified with a call to TIFFSetErrorHandler. + Likewise warning messages are directed to a single handler routine + that can be specified with a call to TIFFSetWarningHandler +

    +
    +

    Basic File Handling

    +

    + The library is modeled after the normal UNIX stdio library. + For example, to read from an existing TIFF image the + file must first be opened: +

    +

    + #include "tiffio.h"
    + main()
    + {
    +     TIFF* tif = TIFFOpen("foo.tif", "r");
    +     ... do stuff ...
    +     TIFFClose(tif);
    + }     +

    +

    + The handle returned by TIFFOpen is opaque, that is + the application is not permitted to know about its contents. + All subsequent library calls for this file must pass the handle + as an argument. +

    +

    + To create or overwrite a TIFF image the file is also opened, but with + a "w" argument: +

    +

    + #include "tiffio.h"
    + main()
    + {
    +     TIFF* tif = TIFFOpen("foo.tif", "w");
    +     ... do stuff ...
    +     TIFFClose(tif);
    + }     +

    +

    + If the file already exists it is first truncated to zero length. +

    + + + + + +
    Note that unlike the stdio library TIFF image files may not be + opened for both reading and writing; + there is no support for altering the contents of a TIFF file.
    +

    + libtiff buffers much information associated with writing a + valid TIFF image. Consequently, when writing a TIFF image it is necessary + to always call TIFFClose or TIFFFlush to flush any + buffered information to a file. Note that if you call TIFFClose + you do not need to call TIFFFlush. +

    +
    +

    TIFF Directories

    +

    + TIFF supports the storage of multiple images in a single file. + Each image has an associated data structure termed a directory + that houses all the information about the format and content of the + image data. + Images in a file are usually related but they do not need to be; it + is perfectly alright to store a color image together with a black and + white image. + Note however that while images may be related their directories are + not. + That is, each directory stands on its own; their is no need to read + an unrelated directory in order to properly interpret the contents + of an image. +

    +

    + libtiff provides several routines for reading and writing + directories. In normal use there is no need to explicitly + read or write a directory: the library automatically reads the first + directory in a file when opened for reading, and directory information + to be written is automatically accumulated and written when writing + (assuming TIFFClose or TIFFFlush are called). +

    +

    + For a file open for reading the TIFFSetDirectory routine can + be used to select an arbitrary directory; directories are referenced by + number with the numbering starting at 0. Otherwise the + TIFFReadDirectory and TIFFWriteDirectory routines can + be used for sequential access to directories. + For example, to count the number of directories in a file the following + code might be used: +

    +

    + #include "tiffio.h"
    + main(int argc, char* argv[])
    + {
    +     TIFF* tif = TIFFOpen(argv[1], "r");
    +     if (tif) {
    +         int dircount = 0;
    +         do {
    +             dircount++;
    +         } while (TIFFReadDirectory(tif));
    +         printf("%d directories in %s\n", dircount, argv[1]);
    +         TIFFClose(tif);
    +     }
    +     exit(0);
    + }     +

    +

    + Finally, note that there are several routines for querying the + directory status of an open file: + TIFFCurrentDirectory returns the index of the current + directory and + TIFFLastDirectory returns an indication of whether the + current directory is the last directory in a file. + There is also a routine, TIFFPrintDirectory, that can + be called to print a formatted description of the contents of + the current directory; consult the manual page for complete details. +

    +
    +

    TIFF Tags

    +

    + Image-related information such as the image width and height, number + of samples, orientation, colorimetric information, etc. + are stored in each image + directory in fields or tags. + Tags are identified by a number that is usually a value registered + with the Aldus (now Adobe) Corporation. + Beware however that some vendors write + TIFF images with tags that are unregistered; in this case interpreting + their contents is usually a waste of time. +

    +

    + libtiff reads the contents of a directory all at once + and converts the on-disk information to an appropriate in-memory + form. While the TIFF specification permits an arbitrary set of + tags to be defined and used in a file, the library only understands + a limited set of tags. + Any unknown tags that are encountered in a file are ignored. + There is a mechanism to extend the set of tags the library handles + without modifying the library itself; + this is described elsewhere. +

    +

    + libtiff provides two interfaces for getting and setting tag + values: TIFFGetField and TIFFSetField. + These routines use a variable argument list-style interface to pass + parameters of different type through a single function interface. + The get interface takes one or more pointers to memory locations + where the tag values are to be returned and also returns one or + zero according to whether the requested tag is defined in the directory. + The set interface takes the tag values either by-reference or + by-value. + The TIFF specification defines + default values for some tags. + To get the value of a tag, or its default value if it is undefined, + the TIFFGetFieldDefaulted interface may be used. +

    +

    + The manual pages for the tag get and set routines specifiy the exact data types + and calling conventions required for each tag supported by the library. +

    +
    +

    TIFF Compression Schemes

    +

    + libtiff includes support for a wide variety of + data compression schemes. + In normal operation a compression scheme is automatically used when + the TIFF Compression tag is set, either by opening a file + for reading, or by setting the tag when writing. +

    +

    + Compression schemes are implemented by software modules termed codecs + that implement decoder and encoder routines that hook into the + core library i/o support. + Codecs other than those bundled with the library can be registered + for use with the TIFFRegisterCODEC routine. + This interface can also be used to override the core-library + implementation for a compression scheme. +

    +
    +

    Byte Order

    +

    + The TIFF specification says, and has always said, that + a correct TIFF + reader must handle images in big-endian and little-endian byte order. + libtiff conforms in this respect. + Consequently there is no means to force a specific + byte order for the data written to a TIFF image file (data is + written in the native order of the host CPU unless appending to + an existing file, in which case it is written in the byte order + specified in the file). +

    +
    +

    Data Placement

    +

    + The TIFF specification requires that all information except an + 8-byte header can be placed anywhere in a file. + In particular, it is perfectly legitimate for directory information + to be written after the image data itself. + Consequently TIFF is inherently not suitable for passing through a + stream-oriented mechanism such as UNIX pipes. + Software that require that data be organized in a file in a particular + order (e.g. directory information before image data) does not + correctly support TIFF. + libtiff provides no mechanism for controlling the placement + of data in a file; image data is typically written before directory + information. +

    +
    +

    TIFFRGBAImage Support

    +

    + libtiff provides a high-level interface for reading image + data from a TIFF file. This interface handles the details of + data organization and format for a wide variety of TIFF files; + at least the large majority of those files that one would normally + encounter. Image data is, by default, returned as ABGR + pixels packed into 32-bit words (8 bits per sample). Rectangular + rasters can be read or data can be intercepted at an intermediate + level and packed into memory in a format more suitable to the + application. + The library handles all the details of the format of data stored on + disk and, in most cases, if any colorspace conversions are required: + bilevel to RGB, greyscale to RGB, CMYK to RGB, YCbCr to RGB, 16-bit + samples to 8-bit samples, associated/unassociated alpha, etc. +

    +

    + There are two ways to read image data using this interface. If + all the data is to be stored in memory and manipulated at once, + then the routine TIFFReadRGBAImage can be used: +

    +

    +

    + #include "tiffio.h"
    + main(int argc, char* argv[])
    + {
    +     TIFF* tif = TIFFOpen(argv[1], "r");
    +     if (tif) {
    +         uint32 w, h;
    +         size_t npixels;
    +         uint32* raster;
    +         
    +         TIFFGetField(tif, TIFFTAG_IMAGEWIDTH, &w);
    +         TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &h);
    +         npixels = w * h;
    +         raster = (uint32*) _TIFFmalloc(npixels * sizeof (uint32));
    +         if (raster != NULL) {
    +             if (TIFFReadRGBAImage(tif, w, h, raster, 0)) {
    +                 ...process raster data...
    +             }
    +             _TIFFfree(raster);
    +         }
    +         TIFFClose(tif);
    +     }
    +     exit(0);
    + }     +

    +

    + Note above that _TIFFmalloc is used to allocate memory for + the raster passed to TIFFReadRGBAImage; this is important + to insure the ``appropriate type of memory'' is passed on machines + with segmented architectures. +

    +

    + Alternatively, TIFFReadRGBAImage can be replaced with a + more low-level interface that permits an application to have more + control over this reading procedure. The equivalent to the above + is: +

    +

    + #include "tiffio.h"
    + main(int argc, char* argv[])
    + {
    +     TIFF* tif = TIFFOpen(argv[1], "r");
    +     if (tif) {
    +         TIFFRGBAImage img;
    +         char emsg[1024];
    +         
    +         if (TIFFRGBAImageBegin(&img, tif, 0, emsg)) {
    +             size_t npixels;
    +             uint32* raster;
    +             
    +             npixels = img.width * img.height;
    +             raster = (uint32*) _TIFFmalloc(npixels * sizeof (uint32));
    +             if (raster != NULL) {
    +                 if (TIFFRGBAImageGet(&img, raster, img.width, img.height)) {
    +                     ...process raster data...
    +                 }
    +                 _TIFFfree(raster);
    +             }
    +             TIFFRGBAImageEnd(&img);
    +         } else
    +             TIFFError(argv[1], emsg);
    +         TIFFClose(tif);
    +     }
    +     exit(0);
    + }     +

    +

    + However this usage does not take advantage of the more fine-grained + control that's possible. That is, by using this interface it is + possible to: +

    +
      +
    • repeatedly fetch (and manipulate) an image without opening + and closing the file
      • +
    • interpose a method for packing raster pixel data according to + application-specific needs (or write the data at all)
      • +
    • interpose methods that handle TIFF formats that are not already + handled by the core library
      • +
    +

    + The first item means that, for example, image viewers that want to + handle multiple files can cache decoding information in order to + speedup the work required to display a TIFF image. +

    +

    + The second item is the main reason for this interface. By interposing + a "put method" (the routine that is called to pack pixel data in + the raster) it is possible share the core logic that understands how + to deal with TIFF while packing the resultant pixels in a format that + is optimized for the application. This alternate format might be very + different than the 8-bit per sample ABGR format the library writes by + default. For example, if the application is going to display the image + on an 8-bit colormap display the put routine might take the data and + convert it on-the-fly to the best colormap indices for display. +

    +

    + The last item permits an application to extend the library + without modifying the core code. + By overriding the code provided an application might add support + for some esoteric flavor of TIFF that it needs, or it might + substitute a packing routine that is able to do optimizations + using application/environment-specific information. +

    +

    + The TIFF image viewer found in tools/sgigt.c is an example + of an application that makes use of the TIFFRGBAImage + support. +

    +
    +

    Scanline-based Image I/O

    +

    + The simplest interface provided by libtiff is a + scanline-oriented interface that can be used to read TIFF + images that have their image data organized in strips + (trying to use this interface to read data written in tiles + will produce errors.) + A scanline is a one pixel high row of image data whose width + is the width of the image. + Data is returned packed if the image data is stored with samples + packed together, or as arrays of separate samples if the data + is stored with samples separated. + The major limitation of the scanline-oriented interface, other + than the need to first identify an existing file as having a + suitable organization, is that random access to individual + scanlines can only be provided when data is not stored in a + compressed format, or when the number of rows in a strip + of image data is set to one (RowsPerStrip is one). +

    +

    + Two routines are provided for scanline-based i/o: + TIFFReadScanline + and + TIFFWriteScanline. + For example, to read the contents of a file that + is assumed to be organized in strips, the following might be used: +

    +

    + #include "tiffio.h"
    + main()
    + {
    +     TIFF* tif = TIFFOpen("myfile.tif", "r");
    +     if (tif) {
    +         uint32 imagelength;
    +         tdata_t buf;
    +         uint32 row;
    +         
    +         TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &imagelength);
    +         buf = _TIFFmalloc(TIFFScanlineSize(tif));
    +         for (row = 0; row < imagelength; row++)
    +             tiffreadscanline(tif, buf, row);
    +         _tifffree(buf);
    +         tiffclose(tif);
    +     }
    + }     +

    +

    + TIFFScanlineSize returns the number of bytes in + a decoded scanline, as returned by TIFFReadScanline. + Note however that if the file had been create with samples + written in separate planes, then the above code would only + read data that contained the first sample of each pixel; + to handle either case one might use the following instead: +

    +

    + #include "tiffio.h"
    + main()
    + {
    +     TIFF* tif = TIFFOpen("myfile.tif", "r");
    +     if (tif) {
    +         uint32 imagelength;
    +         tdata_t buf;
    +         uint32 row;
    +         
    +         TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &imagelength);
    +         TIFFGetField(tif, TIFFTAG_PLANARCONFIG, &config);
    +         buf = _TIFFmalloc(TIFFScanlineSize(tif));
    +         if (config == PLANARCONFIG_CONTIG) {
    +             for (row = 0; row < imagelength; row++)
    +                 tiffreadscanline(tif, buf, row);
    +         } else if (config == planarconfig_separate) {
    +             uint16 s, nsamples;
    +             
    +             tiffgetfield(tif, tifftag_samplesperpixel, &nsamples);
    +             for (s = 0; s < nsamples; s++)
    +                 for (row = 0; row < imagelength; row++)
    +                     tiffreadscanline(tif, buf, row, s);
    +         }
    +         _tifffree(buf);
    +         tiffclose(tif);
    +     }
    + }     +

    +

    + Beware however that if the following code were used instead to + read data in the case PLANARCONFIG_SEPARATE,... +

    +

    +             for (row = 0; row < imagelength; row++)
    +                 for (s = 0; s < nsamples; s++)
    +                     tiffreadscanline(tif, buf, row, s);     +

    +

    + ...then problems would arise if RowsPerStrip was not one + because the order in which scanlines are requested would require + random access to data within strips (something that is not supported + by the library when strips are compressed). +

    +
    +

    Strip-oriented Image I/O

    +

    + The strip-oriented interfaces provided by the library provide + access to entire strips of data. Unlike the scanline-oriented + calls, data can be read or written compressed or uncompressed. + Accessing data at a strip (or tile) level is often desirable + because there are no complications with regard to random access + to data within strips. +

    +

    + A simple example of reading an image by strips is: +

    +

    + #include "tiffio.h"
    + main()
    + {
    +     TIFF* tif = TIFFOpen("myfile.tif", "r");
    +     if (tif) {
    +         tdata_t buf;
    +         tstrip_t strip;
    +         
    +         buf = _TIFFmalloc(TIFFStripSize(tif));
    +         for (strip = 0; strip < tiffnumberofstrips(tif); strip++)
    +             tiffreadencodedstrip(tif, strip, buf, (tsize_t) -1);
    +         _tifffree(buf);
    +         tiffclose(tif);
    +     }
    + }     +

    +

    + Notice how a strip size of -1 is used; TIFFReadEncodedStrip + will calculate the appropriate size in this case. +

    +

    + The above code reads strips in the order in which the + data is physically stored in the file. If multiple samples + are present and data is stored with PLANARCONFIG_SEPARATE + then all the strips of data holding the first sample will be + read, followed by strips for the second sample, etc. +

    +

    + Finally, note that the last strip of data in an image may have fewer + rows in it than specified by the RowsPerStrip tag. A + reader should not assume that each decoded strip contains a full + set of rows in it. +

    +

    + The following is an example of how to read raw strips of data from + a file: +

    +

    + #include "tiffio.h"
    + main()
    + {
    +     TIFF* tif = TIFFOpen("myfile.tif", "r");
    +     if (tif) {
    +         tdata_t buf;
    +         tstrip_t strip;
    +         uint32* bc;
    +         uint32 stripsize;
    +         
    +         TIFFGetField(tif, TIFFTAG_STRIPBYTECOUNTS, &bc);
    +         stripsize = bc[0];
    +         buf = _TIFFmalloc(stripsize);
    +         for (strip = 0; strip < tiffnumberofstrips(tif); strip++) {
    +             if (bc[strip] > stripsize) {
    +                 buf = _TIFFrealloc(buf, bc[strip]);
    +                 stripsize = bc[strip];
    +             }
    +             TIFFReadRawStrip(tif, strip, buf, bc[strip]);
    +         }
    +         _TIFFfree(buf);
    +         TIFFClose(tif);
    +     }
    + }     +

    +

    + As above the strips are read in the order in which they are + physically stored in the file; this may be different from the + logical ordering expected by an application. +

    +
    +

    Tile-oriented Image I/O

    +

    + Tiles of data may be read and written in a manner similar to strips. + With this interface, an image is + broken up into a set of rectangular areas that may have dimensions + less than the image width and height. All the tiles + in an image have the same size, and the tile width and length must each + be a multiple of 16 pixels. Tiles are ordered left-to-right and + top-to-bottom in an image. As for scanlines, samples can be packed + contiguously or separately. When separated, all the tiles for a sample + are colocated in the file. That is, all the tiles for sample 0 appear + before the tiles for sample 1, etc. +

    +

    + Tiles and strips may also be extended in a z dimension to form + volumes. Data volumes are organized as "slices". That is, all the + data for a slice is colocated. Volumes whose data is organized in + tiles can also have a tile depth so that data can be organized in + cubes. +

    +

    + There are actually two interfaces for tiles. + One interface is similar to scanlines, to read a tiled image, + code of the following sort might be used: +

    +

    + main()
    + {
    +     TIFF* tif = TIFFOpen("myfile.tif", "r");
    +     if (tif) {
    +         uint32 imageWidth, imageLength;
    +         uint32 tileWidth, tileLength;
    +         uint32 x, y;
    +         tdata_t buf;
    +         
    +         TIFFGetField(tif, TIFFTAG_IMAGEWIDTH, &imageWidth);
    +         TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &imageLength);
    +         TIFFGetField(tif, TIFFTAG_TILEWIDTH, &tileWidth);
    +         TIFFGetField(tif, TIFFTAG_TILELENGTH, &tileLength);
    +         buf = _TIFFmalloc(TIFFTileSize(tif));
    +         for (y = 0; y < imagelength; y += tilelength)
    +             for (x = 0; x < imagewidth; x += tilewidth)
    +                 tiffreadtile(tif, buf, x, y, 0);
    +         _tifffree(buf);
    +         tiffclose(tif);
    +     }
    + }     +

    +

    + (once again, we assume samples are packed contiguously.) +

    +

    + Alternatively a direct interface to the low-level data is provided + a la strips. Tiles can be read with + TIFFReadEncodedTile or TIFFReadRawTile, + and written with TIFFWriteEncodedTile or + TIFFWriteRawTile. For example, to read all the tiles in an image: +

    +

    + #include "tiffio.h"
    + main()
    + {
    +     TIFF* tif = TIFFOpen("myfile.tif", "r");
    +     if (tif) {
    +         tdata_t buf;
    +         ttile_t tile;
    +         
    +         buf = _TIFFmalloc(TIFFTileSize(tif));
    +         for (tile = 0; tile < tiffnumberoftiles(tif); tile++)
    +             tiffreadencodedtile(tif, tile, buf, (tsize_t) -1);
    +         _tifffree(buf);
    +         tiffclose(tif);
    +     }
    + }     +

    +
    +

    Other Stuff

    +

    + Some other stuff will almost certainly go here... +

    +
    +

    + Last updated: $Date: 2005/12/28 06:53:18 $ +

    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/Makefile.am b/src/SDL2/external/tiff-4.0.3/html/man/Makefile.am new file mode 100644 index 000000000..ca222deab --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/Makefile.am @@ -0,0 +1,126 @@ +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +docdir = $(LIBTIFF_DOCDIR)/html/man +MANSRCDIR = $(top_srcdir)/man +HTMLMANDIR = $(top_srcdir)/html/man + +GROFF = groff -Thtml -mandoc +ECHO = echo + +indexfile = index.html +docfiles = \ + libtiff.3tiff.html \ + TIFFbuffer.3tiff.html \ + TIFFClose.3tiff.html \ + TIFFcodec.3tiff.html \ + TIFFcolor.3tiff.html \ + TIFFDataWidth.3tiff.html \ + TIFFError.3tiff.html \ + TIFFFieldDataType.3tiff.html \ + TIFFFieldName.3tiff.html \ + TIFFFieldPassCount.3tiff.html \ + TIFFFieldReadCount.3tiff.html \ + TIFFFieldTag.3tiff.html \ + TIFFFieldWriteCount.3tiff.html \ + TIFFFlush.3tiff.html \ + TIFFGetField.3tiff.html \ + TIFFmemory.3tiff.html \ + TIFFOpen.3tiff.html \ + TIFFPrintDirectory.3tiff.html \ + TIFFquery.3tiff.html \ + TIFFReadDirectory.3tiff.html \ + TIFFReadEncodedStrip.3tiff.html \ + TIFFReadEncodedTile.3tiff.html \ + TIFFReadRawStrip.3tiff.html \ + TIFFReadRawTile.3tiff.html \ + TIFFReadRGBAImage.3tiff.html \ + TIFFReadRGBAStrip.3tiff.html \ + TIFFReadRGBATile.3tiff.html \ + TIFFReadScanline.3tiff.html \ + TIFFReadTile.3tiff.html \ + TIFFRGBAImage.3tiff.html \ + TIFFSetDirectory.3tiff.html \ + TIFFSetField.3tiff.html \ + TIFFsize.3tiff.html \ + TIFFstrip.3tiff.html \ + TIFFswab.3tiff.html \ + TIFFtile.3tiff.html \ + TIFFWarning.3tiff.html \ + TIFFWriteDirectory.3tiff.html \ + TIFFWriteEncodedStrip.3tiff.html \ + TIFFWriteEncodedTile.3tiff.html \ + TIFFWriteRawStrip.3tiff.html \ + TIFFWriteRawTile.3tiff.html \ + TIFFWriteScanline.3tiff.html \ + TIFFWriteTile.3tiff.html \ + bmp2tiff.1.html \ + fax2ps.1.html \ + fax2tiff.1.html \ + gif2tiff.1.html \ + pal2rgb.1.html \ + ppm2tiff.1.html \ + ras2tiff.1.html \ + raw2tiff.1.html \ + rgb2ycbcr.1.html \ + sgi2tiff.1.html \ + thumbnail.1.html \ + tiff2bw.1.html \ + tiff2pdf.1.html \ + tiff2ps.1.html \ + tiff2rgba.1.html \ + tiffcmp.1.html \ + tiffcp.1.html \ + tiffcrop.1.html \ + tiffdither.1.html \ + tiffdump.1.html \ + tiffgt.1.html \ + tiffinfo.1.html \ + tiffmedian.1.html \ + tiffset.1.html \ + tiffsplit.1.html \ + tiffsv.1.html + +dist_doc_DATA = $(indexfile) $(docfiles) + +INDEXSTART = 'Libtiff HTML manpage index

      Man Pages

      ' +INDEXEND = '

    ' + +.PHONY: index +index: + ${ECHO} ${INDEXSTART} > $(indexfile) + for i in $(docfiles); do \ + ${ECHO} '
  1. '$$i'' >> $(indexfile); \ + done + ${ECHO} ${INDEXEND} >> $(indexfile) + +manpages = $(docfiles:.html=) + +.PHONY: htmldoc +htmldoc: + for i in $(manpages); do \ + ${GROFF} $(MANSRCDIR)/$$i > $(HTMLMANDIR)/$$i.html; \ + done + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/Makefile.in b/src/SDL2/external/tiff-4.0.3/html/man/Makefile.in new file mode 100644 index 000000000..86f71e980 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/Makefile.in @@ -0,0 +1,602 @@ +# Makefile.in generated by automake 1.12.4 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = html/man +DIST_COMMON = $(dist_doc_DATA) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(top_srcdir)/config/mkinstalldirs +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/libtiff/tif_config.h \ + $(top_builddir)/libtiff/tiffconf.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(docdir)" +DATA = $(dist_doc_DATA) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GLUT_CFLAGS = @GLUT_CFLAGS@ +GLUT_LIBS = @GLUT_LIBS@ +GLU_CFLAGS = @GLU_CFLAGS@ +GLU_LIBS = @GLU_LIBS@ +GL_CFLAGS = @GL_CFLAGS@ +GL_LIBS = @GL_LIBS@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBDIR = @LIBDIR@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTIFF_ALPHA_VERSION = @LIBTIFF_ALPHA_VERSION@ +LIBTIFF_DOCDIR = @LIBTIFF_DOCDIR@ +LIBTIFF_MAJOR_VERSION = @LIBTIFF_MAJOR_VERSION@ +LIBTIFF_MICRO_VERSION = @LIBTIFF_MICRO_VERSION@ +LIBTIFF_MINOR_VERSION = @LIBTIFF_MINOR_VERSION@ +LIBTIFF_RELEASE_DATE = @LIBTIFF_RELEASE_DATE@ +LIBTIFF_VERSION = @LIBTIFF_VERSION@ +LIBTIFF_VERSION_INFO = @LIBTIFF_VERSION_INFO@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = $(LIBTIFF_DOCDIR)/html/man +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +tiff_libs_private = @tiff_libs_private@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +MANSRCDIR = $(top_srcdir)/man +HTMLMANDIR = $(top_srcdir)/html/man +GROFF = groff -Thtml -mandoc +ECHO = echo +indexfile = index.html +docfiles = \ + libtiff.3tiff.html \ + TIFFbuffer.3tiff.html \ + TIFFClose.3tiff.html \ + TIFFcodec.3tiff.html \ + TIFFcolor.3tiff.html \ + TIFFDataWidth.3tiff.html \ + TIFFError.3tiff.html \ + TIFFFieldDataType.3tiff.html \ + TIFFFieldName.3tiff.html \ + TIFFFieldPassCount.3tiff.html \ + TIFFFieldReadCount.3tiff.html \ + TIFFFieldTag.3tiff.html \ + TIFFFieldWriteCount.3tiff.html \ + TIFFFlush.3tiff.html \ + TIFFGetField.3tiff.html \ + TIFFmemory.3tiff.html \ + TIFFOpen.3tiff.html \ + TIFFPrintDirectory.3tiff.html \ + TIFFquery.3tiff.html \ + TIFFReadDirectory.3tiff.html \ + TIFFReadEncodedStrip.3tiff.html \ + TIFFReadEncodedTile.3tiff.html \ + TIFFReadRawStrip.3tiff.html \ + TIFFReadRawTile.3tiff.html \ + TIFFReadRGBAImage.3tiff.html \ + TIFFReadRGBAStrip.3tiff.html \ + TIFFReadRGBATile.3tiff.html \ + TIFFReadScanline.3tiff.html \ + TIFFReadTile.3tiff.html \ + TIFFRGBAImage.3tiff.html \ + TIFFSetDirectory.3tiff.html \ + TIFFSetField.3tiff.html \ + TIFFsize.3tiff.html \ + TIFFstrip.3tiff.html \ + TIFFswab.3tiff.html \ + TIFFtile.3tiff.html \ + TIFFWarning.3tiff.html \ + TIFFWriteDirectory.3tiff.html \ + TIFFWriteEncodedStrip.3tiff.html \ + TIFFWriteEncodedTile.3tiff.html \ + TIFFWriteRawStrip.3tiff.html \ + TIFFWriteRawTile.3tiff.html \ + TIFFWriteScanline.3tiff.html \ + TIFFWriteTile.3tiff.html \ + bmp2tiff.1.html \ + fax2ps.1.html \ + fax2tiff.1.html \ + gif2tiff.1.html \ + pal2rgb.1.html \ + ppm2tiff.1.html \ + ras2tiff.1.html \ + raw2tiff.1.html \ + rgb2ycbcr.1.html \ + sgi2tiff.1.html \ + thumbnail.1.html \ + tiff2bw.1.html \ + tiff2pdf.1.html \ + tiff2ps.1.html \ + tiff2rgba.1.html \ + tiffcmp.1.html \ + tiffcp.1.html \ + tiffcrop.1.html \ + tiffdither.1.html \ + tiffdump.1.html \ + tiffgt.1.html \ + tiffinfo.1.html \ + tiffmedian.1.html \ + tiffset.1.html \ + tiffsplit.1.html \ + tiffsv.1.html + +dist_doc_DATA = $(indexfile) $(docfiles) +INDEXSTART = 'Libtiff HTML manpage index

      Man Pages

      ' +INDEXEND = '

    ' +manpages = $(docfiles:.html=) +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign html/man/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign html/man/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-dist_docDATA: $(dist_doc_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ + done + +uninstall-dist_docDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(docdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-dist_docDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-dist_docDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dist_docDATA install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + uninstall uninstall-am uninstall-dist_docDATA + + +.PHONY: index +index: + ${ECHO} ${INDEXSTART} > $(indexfile) + for i in $(docfiles); do \ + ${ECHO} '
  2. '$$i'' >> $(indexfile); \ + done + ${ECHO} ${INDEXEND} >> $(indexfile) + +.PHONY: htmldoc +htmldoc: + for i in $(manpages); do \ + ${GROFF} $(MANSRCDIR)/$$i > $(HTMLMANDIR)/$$i.html; \ + done + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFClose.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFClose.3tiff.html new file mode 100644 index 000000000..720ca327f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFClose.3tiff.html @@ -0,0 +1,87 @@ + + + + + + +TIFFClose + + + +

    TIFFClose

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFClose − close a previously opened +TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    void TIFFClose(TIFF *tif)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFClose closes a file that was previously opened +with TIFFOpen(3TIFF). Any buffered data are flushed +to the file, including the contents of the current directory +(if modified); and all resources are reclaimed.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the routine. Likewise, +warning messages are directed to the +TIFFWarning(3TIFF) routine.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    libtiff(3TIFF), TIFFOpen(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFDataWidth.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFDataWidth.3tiff.html new file mode 100644 index 000000000..575e3cb8c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFDataWidth.3tiff.html @@ -0,0 +1,98 @@ + + + + + + +TIFFDataWidth + + + +

    TIFFDataWidth

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFDataWidth − Get the size of TIFF data types

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    int TIFFDataWidth(TIFFDataType +type)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFDataWidth returns a size of type in +bytes. Currently following data types are supported:
    +TIFF_BYTE
    +TIFF_ASCII
    +TIFF_SBYTE
    +TIFF_UNDEFINED
    +TIFF_SHORT
    +TIFF_SSHORT
    +TIFF_LONG
    +TIFF_SLONG
    +TIFF_FLOAT
    +TIFF_IFD
    +TIFF_RATIONAL
    +TIFF_SRATIONAL
    +TIFF_DOUBLE

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    TIFFDataWidth returns a number of bytes occupied +by the item of given type. 0 returned when uknown data type +supplied.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    libtiff(3TIFF),

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFError.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFError.3tiff.html new file mode 100644 index 000000000..721cec7ec --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFError.3tiff.html @@ -0,0 +1,106 @@ + + + + + + +TIFFError + + + +

    TIFFError

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFError, TIFFSetErrorHandler − library error +handling interface

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    void TIFFError(const char *module, const +char *fmt, ...)

    + +

    #include <stdarg.h>

    + +

    typedef void (*TIFFErrorHandler)(const char +*module, const char *fmt, +va_list ap);
    +TIFFErrorHandler TIFFSetErrorHandler(TIFFErrorHandler +handler);

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFError invokes the library-wide error handling +function to (normally) write an error message to the +stderr. The fmt parameter is a +printf(3S) format string, and any number arguments +can be supplied. The module parameter, if non-zero, +is printed before the message; it typically is used to +identify the software module in which an error is +detected.

    + +

    Applications that desire to capture control in the event +of an error should use TIFFSetErrorHandler to +override the default error handler. A NULL +(0) error handling function may be installed to suppress +error messages.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    TIFFSetErrorHandler returns a reference to the +previous error handling function.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFWarning(3TIFF), libtiff(3TIFF), +printf(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldDataType.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldDataType.3tiff.html new file mode 100644 index 000000000..d6a463f83 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldDataType.3tiff.html @@ -0,0 +1,89 @@ + + + + + + + + + +TIFFFieldDataType + + + + +

    TIFFFieldDataType

    + +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +SEE ALSO
    + +
    + + +

    NAME + +

    + + + +

    TIFFFieldDataType +− Get TIFF data type from field information

    + +

    SYNOPSIS + +

    + + +

    #include +<tiffio.h>

    + + +

    TIFFDataType +TIFFFieldDataType(const TIFFField* +fip)

    + +

    DESCRIPTION + +

    + + + +

    TIFFFieldDataType +returns the data type stored in a TIFF field.

    + +

    fip is a +field information pointer previously returned by +TIFFFindField, TIFFFieldWithTag, or +TIFFFieldWithName.

    + +

    RETURN VALUES + +

    + + + +

    TIFFFieldDataType +returns a member of the enum type TIFFDataType.

    + +

    SEE ALSO + +

    + + + +

    libtiff(3TIFF),

    + +

    Libtiff library +home page: http://www.remotesensing.org/libtiff/

    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldName.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldName.3tiff.html new file mode 100644 index 000000000..b270d4aed --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldName.3tiff.html @@ -0,0 +1,86 @@ + + + + + + + + + +TIFFFieldName + + + + +

    TIFFFieldName

    + +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +SEE ALSO
    + +
    + + +

    NAME + +

    + + +

    TIFFFieldName +− Get TIFF field name from field information

    + +

    SYNOPSIS + +

    + + +

    #include +<tiffio.h>

    + +

    const char* +TIFFFieldName(const TIFFField* fip)

    + +

    DESCRIPTION + +

    + + + +

    TIFFFieldName +returns the textual name for a TIFF field.

    + +

    fip is a +field information pointer previously returned by +TIFFFindField, TIFFFieldWithTag, or +TIFFFieldWithName.

    + +

    RETURN VALUES + +

    + + + +

    TIFFFieldName +returns a constant C string.

    + +

    SEE ALSO + +

    + + + +

    libtiff(3TIFF),

    + +

    Libtiff library +home page: http://www.remotesensing.org/libtiff/

    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldPassCount.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldPassCount.3tiff.html new file mode 100644 index 000000000..480f736d2 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldPassCount.3tiff.html @@ -0,0 +1,98 @@ + + + + + + + + + +TIFFFieldPassCount + + + + +

    TIFFFieldPassCount

    + +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +SEE ALSO
    + +
    + + +

    NAME + +

    + + + +

    TIFFFieldPassCount +− Get whether to pass a count to TIFFGet/SetField

    + +

    SYNOPSIS + +

    + + +

    #include +<tiffio.h>

    + +

    int +TIFFFieldPassCount(const TIFFField* +fip)

    + +

    DESCRIPTION + +

    + + + +

    TIFFFieldPassCount +returns true (nonzero) if TIFFGetField and +TIFFSetField expect a count value to be passed +before the actual data pointer.

    + +

    fip is a +field information pointer previously returned by +TIFFFindField, TIFFFieldWithTag, or +TIFFFieldWithName.

    + +

    When a +count is required, it will be of type uint32 +when TIFFFieldReadCount reports +TIFF_VARIABLE2, and of type uint16 otherwise. +(This distinction is critical for use of +TIFFGetField, but normally not so for use of +TIFFSetField.)

    + +

    RETURN VALUES + +

    + + + +

    TIFFFieldPassCount +returns an integer that is always 1 (true) or 0 (false).

    + +

    SEE ALSO + +

    + + + +

    libtiff(3TIFF),

    + +

    Libtiff library +home page: http://www.remotesensing.org/libtiff/

    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldReadCount.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldReadCount.3tiff.html new file mode 100644 index 000000000..c77d4d37b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldReadCount.3tiff.html @@ -0,0 +1,101 @@ + + + + + + + + + +TIFFFieldReadCount + + + + +

    TIFFFieldReadCount

    + +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +SEE ALSO
    + +
    + + +

    NAME + +

    + + + +

    TIFFFieldReadCount +− Get number of values to be read from field

    + +

    SYNOPSIS + +

    + + +

    #include +<tiffio.h>

    + +

    int +TIFFFieldReadCount(const TIFFField* +fip)

    + +

    DESCRIPTION + +

    + + + +

    TIFFFieldReadCount +returns the number of values available to be read from the +specified TIFF field; that is, the number of arguments that +should be supplied to TIFFGetField. For most field +types this is a small positive integer, typically 1 or 2, +but there are some special values:
    +TIFF_VARIABLE     indicates that a variable number of values +is possible; then, a uint16 count argument and +a pointer data argument must be supplied to +TIFFGetField.
    +TIFF_VARIABLE2     is the same as TIFF_VARIABLE +except that the count argument must have type +uint32.
    +TIFF_SPP     indicates that the number of arguments is equal +to the image’s number of samples per pixel.

    + +

    fip is a +field information pointer previously returned by +TIFFFindField, TIFFFieldWithTag, or +TIFFFieldWithName.

    + +

    RETURN VALUES + +

    + + + +

    TIFFFieldReadCount +returns an integer.

    + +

    SEE ALSO + +

    + + + +

    libtiff(3TIFF),

    + +

    Libtiff library +home page: http://www.remotesensing.org/libtiff/

    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldTag.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldTag.3tiff.html new file mode 100644 index 000000000..d1cc04a4c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldTag.3tiff.html @@ -0,0 +1,88 @@ + + + + + + + + + +TIFFFieldTag + + + + +

    TIFFFieldTag

    + +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +SEE ALSO
    + +
    + + +

    NAME + +

    + + +

    TIFFFieldTag +− Get TIFF field tag value from field information

    + +

    SYNOPSIS + +

    + + +

    #include +<tiffio.h>

    + +

    uint32 +TIFFFieldTag(const TIFFField* fip)

    + +

    DESCRIPTION + +

    + + + +

    TIFFFieldTag +returns the numeric tag value for a TIFF field. This can be +compared to various constants exported by the libtiff +header files, such as TIFFTAG_IMAGEWIDTH.

    + +

    fip is a +field information pointer previously returned by +TIFFFindField, TIFFFieldWithTag, or +TIFFFieldWithName.

    + +

    RETURN VALUES + +

    + + + +

    TIFFFieldTag +returns an integer tag value.

    + +

    SEE ALSO + +

    + + + +

    libtiff(3TIFF),

    + +

    Libtiff library +home page: http://www.remotesensing.org/libtiff/

    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldWriteCount.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldWriteCount.3tiff.html new file mode 100644 index 000000000..d72a8e3c3 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFieldWriteCount.3tiff.html @@ -0,0 +1,108 @@ + + + + + + + + + +TIFFFieldWriteCount + + + + +

    TIFFFieldWriteCount

    + +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +SEE ALSO
    + +
    + + +

    NAME + +

    + + + +

    TIFFFieldWriteCount +− Get number of values to be written to field

    + +

    SYNOPSIS + +

    + + +

    #include +<tiffio.h>

    + +

    int +TIFFFieldWriteCount(const TIFFField* +fip)

    + +

    DESCRIPTION + +

    + + + +

    TIFFFieldWriteCount +returns the number of values to be written into the +specified TIFF field; that is, the number of arguments that +should be supplied to TIFFSetField. For most field +types this is a small positive integer, typically 1 or 2, +but there are some special values:
    +TIFF_VARIABLE     indicates that a variable number of values +is possible; then, a uint16 count argument and +a pointer data argument must be supplied to +TIFFSetField.
    +TIFF_VARIABLE2     is the same as TIFF_VARIABLE +except that the count argument must have type +uint32. (On most modern machines, this makes no +practical difference, and the count argument can +simply be an int in either case.)
    +TIFF_SPP     indicates that the number of arguments must be +equal to the image’s number of samples per pixel.

    + +

    fip is a +field information pointer previously returned by +TIFFFindField, TIFFFieldWithTag, or +TIFFFieldWithName.

    + +

    For most field +types, TIFFFieldWriteCount returns the same value as +TIFFFieldReadCount, but there are some +exceptions.

    + +

    RETURN VALUES + +

    + + + +

    TIFFFieldWriteCount +returns an integer.

    + +

    SEE ALSO + +

    + + + +

    libtiff(3TIFF),

    + +

    Libtiff library +home page: http://www.remotesensing.org/libtiff/

    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFFlush.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFlush.3tiff.html new file mode 100644 index 000000000..742f3aeed --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFFlush.3tiff.html @@ -0,0 +1,113 @@ + + + + + + +TIFFFlush + + + +

    TIFFFlush

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFFlush, TIFFFlushData − flush pending writes to +an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    int TIFFFlush(TIFF *tif)
    +int TIFFFlushData(TIFF *    tif)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFFlush causes any pending writes for the +specified file (including writes for the current directory) +to be done. In normal operation this call is never needed +− the library automatically does any flushing +required.

    + +

    TIFFFlushData flushes any pending image data for +the specified file to be written out; directory-related data +are not flushed. In normal operation this call is never +needed − the library automatically does any flushing +required.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    0 is returned if an error is encountered, otherwise 1 is +returned.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), +TIFFWriteEncodedStrip(3TIFF), +TIFFWriteEncodedTile(3TIFF), +TIFFWriteRawStrip(3TIFF), +TIFFWriteRawTile(3TIFF), +TIFFWriteScanline(3TIFF), TIFFWriteTile(3TIFF) +libtiff(3TIFF),

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFGetField.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFGetField.3tiff.html new file mode 100644 index 000000000..bd2f78bb2 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFGetField.3tiff.html @@ -0,0 +1,1969 @@ + + + + + + + + + +TIFFGetField + + + + +

    TIFFGetField

    + +NAME
    +SYNOPSIS
    +DESCRIPTION
    +AUTOREGISTERED TAGS
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + + +

    NAME + +

    + + +

    TIFFGetField, +TIFFVGetField − get the value(s) of a tag in an open +TIFF file

    + +

    SYNOPSIS + +

    + + +

    #include +<tiffio.h>

    + +

    int +TIFFGetField(TIFF *tif, ttag_t +tag, ...)

    + +

    #include +<stdarg.h>

    + +

    int +TIFFVGetField(TIFF *tif, ttag_t +tag, va_list ap)
    +int TIFFGetFieldDefaulted(TIFF *    tif, +ttag_t tag, ...)
    +int TIFFVGetFieldDefaulted(TIFF *    tif, +ttag_t tag, va_list ap)

    + +

    DESCRIPTION + +

    + + + +

    TIFFGetField +returns the value of a tag or pseudo-tag associated with the +the current directory of the opened TIFF file +tif. (A pseudo-tag is a parameter that is used +to control the operation of the TIFF library +but whose value is not read or written to the underlying +file.) The file must have been previously opened with +TIFFOpen(3TIFF). The tag is identified by tag, +one of the values defined in the include file tiff.h +(see also the table below). The type and number of values +returned is dependent on the tag being requested. The +programming interface uses a variable argument list as +prescribed by the stdarg(3) interface. The returned +values should only be interpreted if TIFFGetField +returns 1.

    + + +

    TIFFVGetField +is functionally equivalent to TIFFGetField except +that it takes a pointer to a variable argument list. +TIFFVGetField is useful for layering interfaces on +top of the functionality provided by +TIFFGetField.

    + + +

    TIFFGetFieldDefaulted +and TIFFVGetFieldDefaulted are identical to +TIFFGetField and TIFFVGetField, except that if +a tag is not defined in the current directory and it has a +default value, then the default value is returned.

    + +

    The tags +understood by libtiff(3TIFF), the number of parameter +values, and the types for the returned values are shown +below. The data types are specified as in C and correspond +to the types used to specify tag values to +TIFFSetField(3TIFF). Remember that +TIFFGetField returns parameter values, so all the +listed data types are pointers to storage where values +should be returned. Consult the TIFF +specification (or relevant industry specification) for +information on the meaning of each tag and their possible +values.

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + + +

    Tag Name

    		 + + +

    Count

    		 +
    + + +

    Types

    		 + + +

    Notes

    + + +

    TIFFTAG_ARTIST

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_BADFAXLINES

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_BITSPERSAMPLE

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_CLEANFAXDATA

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_COLORMAP

    		 + + +

    3

    		 +
    + + +

    uint16**

    		 + + +

    1<<BitsPerSample arrays

    + + +

    TIFFTAG_COMPRESSION

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_CONSECUTIVEBADFAXLINES

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_COPYRIGHT

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_DATATYPE

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_DATETIME

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_DOCUMENTNAME

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_DOTRANGE

    		 + + +

    2

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_EXTRASAMPLES

    		 + + +

    2

    		 +
    + + +

    uint16*,uint16**

    		 + + +

    count & types array

    + + +

    TIFFTAG_FAXFILLFUNC

    		 + + +

    1

    		 +
    + + +

    TIFFFaxFillFunc*

    		 + + +

    G3/G4 compression pseudo-tag

    + + +

    TIFFTAG_FAXMODE

    		 + + +

    1

    		 +
    + + +

    int*

    		 + + +

    G3/G4 compression pseudo-tag

    + + +

    TIFFTAG_FILLORDER

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_GROUP3OPTIONS

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_GROUP4OPTIONS

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_HALFTONEHINTS

    		 + + +

    2

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_HOSTCOMPUTER

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_ICCPROFILE

    		 + + +

    2

    		 +
    + + +

    uint32*,void**

    		 + + +

    count, profile data

    + + +

    TIFFTAG_IMAGEDEPTH

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_IMAGEDESCRIPTION

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_IMAGELENGTH

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_IMAGEWIDTH

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_INKNAMES

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_INKSET

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_JPEGCOLORMODE

    		 + + +

    1

    		 +
    + + +

    int*

    		 + + +

    JPEG pseudo-tag

    + + +

    TIFFTAG_JPEGQUALITY

    		 + + +

    1

    		 +
    + + +

    int*

    		 + + +

    JPEG pseudo-tag

    + + +

    TIFFTAG_JPEGTABLES

    		 + + +

    2

    		 +
    + + +

    uint32*,void**

    		 + + +

    count & tables

    + + +

    TIFFTAG_JPEGTABLESMODE

    		 + + +

    1

    		 +
    + + +

    int*

    		 + + +

    JPEG pseudo-tag

    + + +

    TIFFTAG_MAKE

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_MATTEING

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_MAXSAMPLEVALUE

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_MINSAMPLEVALUE

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_MODEL

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_ORIENTATION

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_PAGENAME

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_PAGENUMBER

    		 + + +

    2

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_PHOTOMETRIC

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_PHOTOSHOP

    		 + + +

    2

    		 +
    + + +

    uint32*,void**

    		 + + +

    count, data

    + + +

    TIFFTAG_PLANARCONFIG

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_PREDICTOR

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_PRIMARYCHROMATICITIES

    		 + + +

    1

    		 +
    + + +

    float**

    		 + + +

    6-entry array

    + + +

    TIFFTAG_REFERENCEBLACKWHITE

    		 + + +

    1

    		 +
    + + +

    float**

    		 + + +

    6-entry array

    + + +

    TIFFTAG_RESOLUTIONUNIT

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_RICHTIFFIPTC

    		 + + +

    2

    		 +
    + + +

    uint32*,void**

    		 + + +

    count, data

    + + +

    TIFFTAG_ROWSPERSTRIP

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_SAMPLEFORMAT

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_SAMPLESPERPIXEL

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_SMAXSAMPLEVALUE

    		 + + +

    1

    		 +
    + + +

    double*

    		 +
    + + +

    TIFFTAG_SMINSAMPLEVALUE

    		 + + +

    1

    		 +
    + + +

    double*

    		 +
    + + +

    TIFFTAG_SOFTWARE

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_STONITS

    		 + + +

    1

    		 +
    + + +

    double**

    		 +
    + + +

    TIFFTAG_STRIPBYTECOUNTS

    		 + + +

    1

    		 +
    + + +

    uint32**

    		 +
    + + +

    TIFFTAG_STRIPOFFSETS

    		 + + +

    1

    		 +
    + + +

    uint32**

    		 +
    + + +

    TIFFTAG_SUBFILETYPE

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_SUBIFD

    		 + + +

    2

    		 +
    + + +

    uint16*,uint32**

    		 + + +

    count & offsets array

    + + +

    TIFFTAG_TARGETPRINTER

    		 + + +

    1

    		 +
    + + +

    char**

    		 +
    + + +

    TIFFTAG_THRESHHOLDING

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_TILEBYTECOUNTS

    		 + + +

    1

    		 +
    + + +

    uint32**

    		 +
    + + +

    TIFFTAG_TILEDEPTH

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_TILELENGTH

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_TILEOFFSETS

    		 + + +

    1

    		 +
    + + +

    uint32**

    		 +
    + + +

    TIFFTAG_TILEWIDTH

    		 + + +

    1

    		 +
    + + +

    uint32*

    		 +
    + + +

    TIFFTAG_TRANSFERFUNCTION

    		 + + +

    1 or 3†

    		 + + +

    uint16**1<<BitsPerSample entry arrays

    + + +

    TIFFTAG_WHITEPOINT

    		 + + +

    1

    		 +
    + + +

    float**

    		 + + +

    2-entry array

    + + +

    TIFFTAG_XMLPACKET

    		 + + +

    2

    		 +
    + + +

    uint32*,void**

    		 + + +

    count, data

    + + +

    TIFFTAG_XPOSITION

    		 + + +

    1

    		 +
    + + +

    float*

    		 +
    + + +

    TIFFTAG_XRESOLUTION

    		 + + +

    1

    		 +
    + + +

    float*

    		 +
    + + +

    TIFFTAG_YCBCRCOEFFICIENTS

    		 + + +

    1

    		 +
    + + +

    float**

    		 + + +

    3-entry array

    + + +

    TIFFTAG_YCBCRPOSITIONING

    		 + + +

    1

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_YCBCRSUBSAMPLING

    		 + + +

    2

    		 +
    + + +

    uint16*

    		 +
    + + +

    TIFFTAG_YPOSITION

    		 + + +

    1

    		 +
    + + +

    float*

    		 +
    + + +

    TIFFTAG_YRESOLUTION

    		 + + +

    1

    		 +
    + + +

    float*‡

    		 +
    + +

    † If +SamplesPerPixel is one, then a single array is +returned; otherwise three arrays are returned.
    +‡ The contents of this field are quite complex. See +The ICC Profile Format Specification, Annex B.3 +"Embedding ICC Profiles in TIFF Files" (available +at http://www.color.org) for an explanation.

    + +

    AUTOREGISTERED TAGS + +

    + + +

    If you +can’t find the tag in the table above that means this +is unsupported tag. But you still be able to read it’s +value if you know the data type of that tag. For example, if +you want to read the LONG value from the tag 33424 and ASCII +string from the tag 36867 you can use the following +code:

    + +

    uint16 count; +
    +void *data;

    + + +

    TIFFGetField(tiff, +33424, &count, &data);
    +printf("Tag %d: %d, count %d0, 33424, *(uint32 *)data, +count);
    +TIFFGetField(tiff, 36867, &count, &data);
    +printf("Tag %d: %s, count %d0, 36867, (char *)data, +count);

    + +

    is not +supported by libtiff(3TIFF), library

    + +

    RETURN VALUES + +

    + + +

    1 is returned +if the tag is defined in the current directory; otherwise a +0 is returned.

    + +

    DIAGNOSTICS + +

    + + +

    All error +messages are directed to the TIFFError(3TIFF) +routine.

    + +

    Unknown +field, tag 0x%x. An unknown tag was supplied.

    + +

    SEE ALSO + +

    + + + +

    TIFFOpen(3TIFF), +TIFFSetField(3TIFF), TIFFSetDirectory(3TIFF), +TIFFReadDirectory(3TIFF), +TIFFWriteDirectory(3TIFF) libtiff(3TIFF),

    + +

    Libtiff library +home page: http://www.remotesensing.org/libtiff/

    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFOpen.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFOpen.3tiff.html new file mode 100644 index 000000000..2379121f1 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFOpen.3tiff.html @@ -0,0 +1,421 @@ + + + + + + +TIFFOpen + + + +

    TIFFOpen

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +BYTE ORDER
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFOpen, TIFFFdOpen, TIFFClientOpen − open a +TIFF file for reading or writing

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    TIFF* TIFFOpen(const char *filename, +const char *mode)
    +TIFF* TIFFFdOpen(const int     fd, const char +*filename, const char +*mode)

    + +

    typedef tsize_t (*TIFFReadWriteProc)(thandle_t, +tdata_t, tsize_t);
    +typedef toff_t (*TIFFSeekProc)(thandle_t, toff_t, int);
    +typedef int (*TIFFCloseProc)(thandle_t);
    +typedef toff_t (*TIFFSizeProc)(thandle_t);
    +typedef int (*TIFFMapFileProc)(thandle_t, tdata_t*, +toff_t*);
    +typedef void (*TIFFUnmapFileProc)(thandle_t, tdata_t, +toff_t);

    + +

    TIFF* TIFFClientOpen(const char +*filename, const char *mode, +thandle_t clientdata, TIFFReadWriteProc +readproc, TIFFReadWriteProc +writeproc, TIFFSeekProc seekproc, +TIFFCloseProc closeproc, TIFFSizeProc +sizeproc, TIFFMapFileProc mapproc, +TIFFUnmapFileProc unmapproc)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFOpen opens a TIFF file whose +name is filename and returns a handle to be used in +subsequent calls to routines in libtiff. If the open +operation fails, then zero is returned. The mode +parameter specifies if the file is to be opened for reading +(‘‘r’’), writing +(‘‘w’’), or appending +(‘‘a’’) and, optionally, whether to +override certain default aspects of library operation (see +below). When a file is opened for appending, existing data +will not be touched; instead new data will be written as +additional subfiles. If an existing file is opened for +writing, all previous data is overwritten.

    + +

    If a file is opened for reading, the first +TIFF directory in the file is automatically +read (also see TIFFSetDirectory(3TIFF) for reading +directories other than the first). If a file is opened for +writing or appending, a default directory is automatically +created for writing subsequent data. This directory has all +the default values specified in TIFF Revision +6.0: BitsPerSample=1, ThreshHolding=bilevel +art scan, FillOrder=1 (most significant bit of each +data byte is filled first), Orientation=1 (the 0th +row represents the visual top of the image, and the 0th +column represents the visual left hand side), +SamplesPerPixel=1, RowsPerStrip=infinity, +ResolutionUnit=2 (inches), and Compression=1 +(no compression). To alter these values, or to define values +for additional fields, TIFFSetField(3TIFF) must be +used.

    + +

    TIFFFdOpen is like TIFFOpen except that it +opens a TIFF file given an open file +descriptor fd. The file’s name and mode must +reflect that of the open descriptor. The object associated +with the file descriptor must support random +access.

    + +

    TIFFClientOpen is like TIFFOpen except that +the caller supplies a collection of functions that the +library will use to do UNIX -like I/O +operations. The readproc and writeproc are +called to read and write data at the current file position. +seekproc is called to change the current file +position a la lseek(2). closeproc is invoked +to release any resources associated with an open file. +sizeproc is invoked to obtain the size in bytes of a +file. mapproc and unmapproc are called to map +and unmap a file’s contents in memory; c.f. +mmap(2) and munmap(2). The clientdata +parameter is an opaque ‘‘handle’’ +passed to the client-specified routines passed as parameters +to TIFFClientOpen.

    +
    + +

    OPTIONS

    + + + + + +
    +

    The open mode parameter can include the following flags +in addition to the ‘‘r’’, +‘‘w’’, and +‘‘a’’ flags. Note however that +option flags must follow the read-write-append +specification.

    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    l

    +    		 + +

    When creating a new file force information be written +with Little-Endian byte order (but see below). By default +the library will create new files using the native +CPU byte order.

    +    		 +
    + +

    b

    +    		 + +

    When creating a new file force information be written +with Big-Endian byte order (but see below). By default the +library will create new files using the native +CPU byte order.

    +    		 +
    + +

    L

    +    		 + +

    Force image data that is read or written to be treated +with bits filled from Least Significant Bit ( +LSB ) to Most Significant Bit ( +MSB ). Note that this is the opposite to the +way the library has worked from its inception.

    +    		 +
    + +

    B

    +    		 + +

    Force image data that is read or written to be treated +with bits filled from Most Significant Bit ( +MSB ) to Least Significant Bit ( +LSB ); this is the default.

    +    		 +
    + +

    H

    +    		 + +

    Force image data that is read or written to be treated +with bits filled in the same order as the native +CPU.

    +    		 +
    + +

    M

    +    		 + +

    Enable the use of memory-mapped files for images opened +read-only. If the underlying system does not support +memory-mapped files or if the specific image being opened +cannot be memory-mapped then the library will fallback to +using the normal system interface for reading information. +By default the library will attempt to use memory-mapped +files.

    +    		 +
    + +

    m

    +    		 + +

    Disable the use of memory-mapped files.

    +    		 +
    + +

    C

    +    		 + +

    Enable the use of ‘‘strip +chopping’’ when reading images that are +comprised of a single strip or tile of uncompressed data. +Strip chopping is a mechanism by which the library will +automatically convert the single-strip image to multiple +strips, each of which has about 8 Kilobytes of data. This +facility can be useful in reducing the amount of memory used +to read an image because the library normally reads each +strip in its entirety. Strip chopping does however alter the +apparent contents of the image because when an image is +divided into multiple strips it looks as though the +underlying file contains multiple separate strips. Finally, +note that default handling of strip chopping is a +compile-time configuration parameter. The default behaviour, +for backwards compatibility, is to enable strip +chopping.

    +    		 +
    + +

    c

    +    		 + +

    Disable the use of strip chopping when reading +images.

    +    		 +
    + +

    h

    +    		 + +

    Read TIFF header only, do not load the first image +directory. That could be useful in case of the broken first +directory. We can open the file and proceed to the other +directories.

    +    		 +
    + +

    BYTE ORDER

    + + + + + +
    +

    The TIFF specification (all +versions) states that compliant readers must be +capable of reading images written in either byte order. +Nonetheless some software that claims to support the reading +of TIFF images is incapable of reading images +in anything but the native CPU byte order on +which the software was written. (Especially notorious are +applications written to run on Intel-based machines.) By +default the library will create new files with the native +byte-order of the CPU on which the +application is run. This ensures optimal performance and is +portable to any application that conforms to the TIFF +specification. To force the library to use a specific +byte-order when creating a new file the +‘‘b’’ and +‘‘l’’ option flags may be included +in the call to open a file; for example, +‘‘wb’’ or +‘‘wl’’.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    Upon successful completion TIFFOpen, +TIFFFdOpen, and TIFFClientOpen return a +TIFF pointer. Otherwise, NULL is +returned.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine. Likewise, warning messages +are directed to the TIFFWarning(3TIFF) routine.

    + +

    "%s": Bad mode. The specified +mode parameter was not one of +‘‘r’’ (read), +‘‘w’’ (write), or +‘‘a’’ (append).

    + +

    %s: Cannot open. TIFFOpen() was unable to +open the specified filename for read/writing.

    + +

    Cannot read TIFF header. An error occurred while +attempting to read the header information.

    + +

    Error writing TIFF header. An error occurred while +writing the default header information for a new file.

    + +

    Not a TIFF file, bad magic number %d (0x%x). The +magic number in the header was not (hex) 0x4d4d or (hex) +0x4949.

    + +

    Not a TIFF file, bad version number %d (0x%x). The +version field in the header was not 42 (decimal).

    + +

    Cannot append to file that has opposite byte +ordering. A file with a byte ordering opposite to the +native byte ordering of the current machine was opened for +appending (‘‘a’’). This is a +limitation of the library.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    libtiff(3TIFF), TIFFClose(3TIFF)

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFPrintDirectory.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFPrintDirectory.3tiff.html new file mode 100644 index 000000000..f4dca6e44 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFPrintDirectory.3tiff.html @@ -0,0 +1,225 @@ + + + + + + +TIFFPrintDirectory + + + +

    TIFFPrintDirectory

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFPrintDirectory − print a description of a +TIFF directory

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    void TIFFPrintDirectory(TIFF *tif, FILE +*fd, long flags)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFPrintDirectory prints a description of the +current directory in the specified TIFF file +to the standard I/O output stream fd. The +flags parameter is used to control the level of +detail of the printed information; it is a bit-or of the +flags defined in tiffio.h:

    + + +

    #define TIFFPRINT_NONE 0x0 /* no extra info */

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    #define

    +    		 + +

    TIFFPRINT_STRIPS

    +    		 + +

    0x1

    +    		 + +

    /* strips/tiles info */

    +
    + +

    #define

    +    		 + +

    TIFFPRINT_CURVES

    +    		 + +

    0x2

    +    		 + +

    /* color/gray response curves */

    +
    + +

    #define

    +    		 + +

    TIFFPRINT_COLORMAP

    +    		 + +

    0x4

    +    		 + +

    /* colormap */

    +
    + +

    #define

    +    		 + +

    TIFFPRINT_JPEGQTABLES

    +    		 + +

    0x100

    +    		 + +

    /* JPEG Q matrices */

    +
    + +

    #define

    +    		 + +

    TIFFPRINT_JPEGACTABLES

    +    		 + +

    0x200

    +    		 + +

    /* JPEG AC tables */

    +
    + +

    #define

    +    		 + +

    TIFFPRINT_JPEGDCTABLES

    +    		 + +

    0x200

    +    		 + +

    /* JPEG DC tables */

    +
    + +

    NOTES

    + + + + + +
    +

    In C++ the flags parameter defaults to 0.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    None.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    None.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    libtiff(3TIFF), TIFFOpen(3TIFF), +TIFFReadDirectory(3TIFF), +TIFFSetDirectory(3TIFF)

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFRGBAImage.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFRGBAImage.3tiff.html new file mode 100644 index 000000000..08a992402 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFRGBAImage.3tiff.html @@ -0,0 +1,319 @@ + + + + + + +TIFFRGBAImage + + + +

    TIFFRGBAImage

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +ALTERNATE RASTER FORMATS
    +SIMULTANEOUS RASTER STORE AND DISPLAY
    +SUPPORTING ADDITIONAL TIFF FORMATS
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFRGBAImageOK, TIFFRGBAImageBegin, TIFFRGBAImageGet, +TIFFRGBAImageEnd − read and decode an image into a +raster

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    typedef unsigned char TIFFRGBValue; typedef struct +_TIFFRGBAImage TIFFRGBAImage;

    + +

    int TIFFRGBAImageOK(TIFF *tif, char +emsg[1024])
    +int TIFFRGBAImageBegin(TIFFRGBAImage *    img, +TIFF* tif, int stopOnError, +char emsg[1024])
    +int TIFFRGBAImageGet(TIFFRGBAImage *    img, +uint32* raster, uint32 width , +uint32 height)
    +void TIFFRGBAImageEnd(TIFFRGBAImage +*    img)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    The routines described here provide a high-level +interface through which TIFF images may be +read into memory. Images may be strip- or tile-based and +have a variety of different characteristics: bits/sample, +samples/pixel, photometric, etc. Decoding state is +encapsulated in a TIFFRGBAImage structure making it +possible to capture state for multiple images and quickly +switch between them. The target raster format can be +customized to a particular application’s needs by +installing custom routines that manipulate image data +according to application requirements.

    + +

    The default usage for these routines is: check if an +image can be processed using TIFFRGBAImageOK, +construct a decoder state block using +TIFFRGBAImageBegin, read and decode an image into a +target raster using TIFFRGBAImageGet, and then +release resources using TIFFRGBAImageEnd. +TIFFRGBAImageGet can be called multiple times to +decode an image using different state parameters. If +multiple images are to be displayed and there is not enough +space for each of the decoded rasters, multiple state blocks +can be managed and then calls can be made to +TIFFRGBAImageGet as needed to display an image.

    + +

    The generated raster is assumed to be an array of +width times height 32-bit entries, where +width must be less than or equal to the width of the +image (height may be any non-zero size). If the +raster dimensions are smaller than the image, the image data +is cropped to the raster bounds. If the raster height is +greater than that of the image, then the image data are +placed in the lower part of the raster. (Note that the +raster is assume to be organized such that the pixel at +location (x,y) is +raster[y*width+x]; with the +raster origin in the lower-left hand corner.)

    + +

    Raster pixels are 8-bit packed red, green, blue, alpha +samples. The macros TIFFGetR, TIFFGetG, +TIFFGetB, and TIFFGetA should be used to +access individual samples. Images without Associated Alpha +matting information have a constant Alpha of 1.0 (255).

    + +

    TIFFRGBAImageGet converts non-8-bit images by +scaling sample values. Palette, grayscale, bilevel, +CMYK , and YCbCr images are converted to +RGB transparently. Raster pixels are returned +uncorrected by any colorimetry information present in the +directory.

    + +

    The parameter stopOnError specifies how to act if +an error is encountered while reading the image. If +stopOnError is non-zero, then an error will terminate +the operation; otherwise TIFFRGBAImageGet will +continue processing data until all the possible data in the +image have been requested.

    +
    + +

    ALTERNATE RASTER FORMATS

    + + + + + +
    +

    To use the core support for reading and processing +TIFF images, but write the resulting raster +data in a different format one need only override the +‘‘put methods’’ used to store +raster data. These methods are are defined in the +TIFFRGBAImage structure and initially setup by +TIFFRGBAImageBegin to point to routines that pack +raster data in the default ABGR pixel format. +Two different routines are used according to the physical +organization of the image data in the file: +PlanarConfiguration=1 (packed samples), and +PlanarConfiguration=2 (separated samples). Note that +this mechanism can be used to transform the data before +storing it in the raster. For example one can convert data +to colormap indices for display on a colormap display.

    +
    + +

    SIMULTANEOUS RASTER STORE AND DISPLAY

    + + + + + +
    +

    It is simple to display an image as it is being read into +memory by overriding the put methods as described above for +supporting alternate raster formats. Simply keep a reference +to the default put methods setup by +TIFFRGBAImageBegin and then invoke them before or +after each display operation. For example, the +tiffgt(1) utility uses the following put method to +update the display as the raster is being filled:

    + +
    static void
+putContigAndDraw(TIFFRGBAImage* img, uint32* raster,
+    uint32 x, uint32 y, uint32 w, uint32 h,
+    int32 fromskew, int32 toskew,
+    unsigned char* cp)
+{
+    (*putContig)(img, raster, x, y, w, h, fromskew, toskew, cp);
+    if (x+w == width) {
+     w = width;
+     if (img->orientation == ORIENTATION_TOPLEFT)
+         lrectwrite(0, y-(h-1), w-1, y, raster-x-(h-1)*w);
+     else
+         lrectwrite(0, y, w-1, y+h-1, raster);
+    }
+}
+
    + +

    (the original routine provided by the library is saved in +the variable putContig.)

    +
    + +

    SUPPORTING ADDITIONAL TIFF FORMATS

    + + + + + +
    +

    The TIFFRGBAImage routines support the most +commonly encountered flavors of TIFF. It is +possible to extend this support by overriding the +‘‘get method’’ invoked by +TIFFRGBAImageGet to read TIFF image +data. Details of doing this are a bit involved, it is best +to make a copy of an existing get method and modify it to +suit the needs of an application.

    +
    + +

    NOTES

    + + + + + +
    +

    Samples must be either 1, 2, 4, 8, or 16 bits. +Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. +SamplesPerPixel minus ExtraSamples).

    + +

    Palette image colormaps that appear to be incorrectly +written as 8-bit values are automatically scaled to +16-bits.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    All routines return 1 if the operation was successful. +Otherwise, 0 is returned if an error was encountered and +stopOnError is zero.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    Sorry, can not handle %d-bit pictures. The image +had BitsPerSample other than 1, 2, 4, 8, or 16.

    + +

    Sorry, can not handle %d-channel images. The image +had SamplesPerPixel other than 1, 3, or 4.

    + +

    Missing needed "PhotometricInterpretation" +tag. The image did not have a tag that describes how to +display the data.

    + +

    No "PhotometricInterpretation" tag, assuming +RGB. The image was missing a tag that describes how to +display it, but because it has 3 or 4 samples/pixel, it is +assumed to be RGB.

    + +

    No "PhotometricInterpretation" tag, assuming +min-is-black. The image was missing a tag that describes +how to display it, but because it has 1 sample/pixel, it is +assumed to be a grayscale or bilevel image.

    + +

    No space for photometric conversion table. There +was insufficient memory for a table used to convert image +samples to 8-bit RGB.

    + +

    Missing required "Colormap" tag. A +Palette image did not have a required Colormap +tag.

    + +

    No space for tile buffer. There was insufficient +memory to allocate an i/o buffer.

    + +

    No space for strip buffer. There was insufficient +memory to allocate an i/o buffer.

    + +

    Can not handle format. The image has a format +(combination of BitsPerSample, +SamplesPerPixel, and +PhotometricInterpretation) that can not be +handled.

    + +

    No space for B&W mapping table. There was +insufficient memory to allocate a table used to map +grayscale data to RGB.

    + +

    No space for Palette mapping table. There was +insufficient memory to allocate a table used to map data to +8-bit RGB.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), TIFFReadRGBAImage(3TIFF), +TIFFReadRGBAImageOriented(3TIFF), +TIFFReadRGBAStrip(3TIFF), +TIFFReadRGBATile(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadDirectory.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadDirectory.3tiff.html new file mode 100644 index 000000000..82350ad3a --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadDirectory.3tiff.html @@ -0,0 +1,218 @@ + + + + + + +TIFFReadDirectory + + + +

    TIFFReadDirectory

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFReadDirectory − get the contents of the +next directory in an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    int TIFFReadDirectory(TIFF +*tif)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Read the next directory in the specified file and +make it the current directory. Applications only need to +call TIFFReadDirectory to read multiple subfiles in a +single TIFF file— the first directory in a +file is automatically read when TIFFOpen is +called.

    +
    + +

    NOTES

    + + + + + +
    +

    If the library is compiled with +STRIPCHOP_SUPPORT enabled, then images that have a +single uncompressed strip or tile of data are automatically +treated as if they were made up of multiple strips or tiles +of approximately 8 kilobytes each. This operation is done +only in-memory; it does not alter the contents of the file. +However, the construction of the ‘‘chopped +strips’’ is visible to the application through +the number of strips [tiles] returned by +TIFFNumberOfStrips +[TIFFNumberOfTiles].

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    If the next directory was successfully read, 1 is +returned. Otherwise, 0 is returned if an error was +encountered, or if there are no more directories to be +read.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine. All warning messages are +directed to the TIFFWarning(3TIFF) routine.

    + +

    Seek error accessing TIFF directory. An error +occurred while positioning to the location of the +directory.

    + +

    Wrong data type %d for field "%s". +The tag entry in the directory had an incorrect data type. +For example, an ImageDescription tag with a +SHORT data type.

    + +

    TIFF directory is missing required "%s" +field. The specified tag is required to be present by +the TIFF 5.0 specification, but is missing. The +directory is (usually) unusable.

    + +

    %s: Rational with zero denominator. A +directory tag has a RATIONAL value whose +denominator is zero.

    + +

    Incorrect count %d for field "%s" (%lu, +expecting %lu); tag ignored. The specified tag’s +count field is bad. For example, a count other than 1 for a +SubFileType tag.

    + +

    Cannot handle different per-sample values for +field "%s". The tag has SamplesPerPixel +values and they are not all the same; e.g. +BitsPerSample. The library is unable to handle images +of this sort.

    + +

    Count mismatch for field "%s"; +expecting %d, got %d. The count field in a tag does not +agree with the number expected by the library. This should +never happen, so if it does, the library refuses to read the +directory.

    + +

    Invalid TIFF directory; tags are not sorted in +ascending order. The directory tags are not properly +sorted as specified in the TIFF 5.0 +specification. This error is not fatal.

    + +

    Ignoring unknown field with tag %d (0x%x). An +unknown tag was encountered in the directory; the library +ignores all such tags.

    + +

    TIFF directory is missing requred +"ImageLength" field. The image violates the +specification by not having a necessary field. There is no +way for the library to recover from this error.

    + +

    TIFF directory is missing requred +"PlanarConfig" field. The image violates the +specification by not having a necessary field. There is no +way for the library to recover from this error.

    + +

    TIFF directory is missing requred +"StripOffsets" field. The image has multiple +strips, but is missing the tag that specifies the file +offset to each strip of data. There is no way for the +library to recover from this error.

    + +

    TIFF directory is missing requred +"TileOffsets" field. The image has multiple +tiles, but is missing the tag that specifies the file offset +to each tile of data. There is no way for the library to +recover from this error.

    + +

    TIFF directory is missing required +"StripByteCounts" field. The image has +multiple strips, but is missing the tag that specifies the +size of each strip of data. There is no way for the library +to recover from this error.

    + +

    TIFF directory is missing required +"StripByteCounts" field, calculating from +imagelength. The image violates the specification by not +having a necessary field. However, when the image is +comprised of only one strip or tile, the library will +estimate the missing value based on the file size.

    + +

    Bogus "StripByteCounts" field, ignoring +and calculating from imagelength. Certain vendors +violate the specification by writing zero for the +StripByteCounts tag when they want to leave the value +unspecified. If the image has a single strip, the library +will estimate the missing value based on the file +size.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), +TIFFWriteDirectory(3TIFF), +TIFFSetDirectory(3TIFF), +TIFFSetSubDirectory(3TIFF), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadEncodedStrip.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadEncodedStrip.3tiff.html new file mode 100644 index 000000000..d5c4c15e6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadEncodedStrip.3tiff.html @@ -0,0 +1,133 @@ + + + + + + +TIFFReadEncodedStrip + + + +

    TIFFReadEncodedStrip

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFReadEncodedStrip − read and decode a strip +of data from an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    tsize_t TIFFReadEncodedStrip(TIFF +*tif, tstrip_t strip, +tdata_t buf, tsize_t +size)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Read the specified strip of data and place up to +size bytes of decompressed information in the (user +supplied) data buffer.

    +
    + +

    NOTES

    + + + + + +
    +

    The value of strip is a ‘‘raw +strip number.’’ That is, the caller must take +into account whether or not the data are organized in +separate planes (PlanarConfiguration=2). To read a +full strip of data the data buffer should typically be at +least as large as the number returned by +TIFFStripSize(3TIFF). If the -1 passed in size +parameter, the whole strip will be read. You should be sure +you have enough space allocated for the buffer.

    + +

    The library attempts to hide bit- and byte-ordering +differences between the image and the native machine by +converting data to the native machine order. Bit reversal is +done if the FillOrder tag is opposite to the native +machine bit order. 16- and 32-bit samples are automatically +byte-swapped if the file was written with a byte order +opposite to the native machine byte order,

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    The actual number of bytes of data that were placed +in buf is returned; TIFFReadEncodedStrip +returns −1 if an error was encountered.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), +TIFFReadRawStrip(3TIFF), +TIFFReadScanline(3TIFF), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadEncodedTile.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadEncodedTile.3tiff.html new file mode 100644 index 000000000..b42dc0908 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadEncodedTile.3tiff.html @@ -0,0 +1,130 @@ + + + + + + +TIFFReadEncodedTile + + + +

    TIFFReadEncodedTile

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFReadEncodedTile − read and decode a tile of +data from an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    int TIFFReadEncodedTile(TIFF *tif, +ttile_t tile, tdata_t buf, +tsize_t size)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Read the specified tile of data and place up to +size bytes of decompressed information in the (user +supplied) data buffer.

    +
    + +

    NOTES

    + + + + + +
    +

    The value of tile is a ‘‘raw tile +number.’’ That is, the caller must take into +account whether or not the data are organized in separate +planes (PlanarConfiguration=2). +TIFFComputeTile automatically does this when +converting an (x,y,z,sample) coordinate quadruple to a tile +number. To read a full tile of data the data buffer should +be at least as large as the value returned by +TIFFTileSize.

    + +

    The library attempts to hide bit- and byte-ordering +differences between the image and the native machine by +converting data to the native machine order. Bit reversal is +done if the FillOrder tag is opposite to the native +machine bit order. 16- and 32-bit samples are automatically +byte-swapped if the file was written with a byte order +opposite to the native machine byte order,

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    The actual number of bytes of data that were placed in +buf is returned; TIFFReadEncodedTile returns +−1 if an error was encountered.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), TIFFReadRawTile(3TIFF), +TIFFReadTile(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBAImage.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBAImage.3tiff.html new file mode 100644 index 000000000..1ebb09b8b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBAImage.3tiff.html @@ -0,0 +1,301 @@ + + + + + + +TIFFReadRGBAImage + + + +

    TIFFReadRGBAImage

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFReadRGBAImage, TIFFReadRGBAImageOriented − read +and decode an image into a fixed-format raster

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    #define TIFFGetR(abgr) ((abgr) & 0xff)
    +#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff)
    +#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff)
    +#define TIFFGetA(abgr) (((abgr) >> 24) & +0xff)

    + +

    int TIFFReadRGBAImage(TIFF *tif, +uint32 width, uint32 height, +uint32 *raster, int +stopOnError)
    +int TIFFReadRGBAImageOriented(TIFF *    tif, +uint32 width, uint32 height, +uint32 *raster, int orientation, +int stopOnError)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFReadRGBAImage reads a strip- or tile-based +image into memory, storing the result in the user supplied +raster. The raster is assumed to be an array of +width times height 32-bit entries, where +width must be less than or equal to the width of the +image (height may be any non-zero size). If the +raster dimensions are smaller than the image, the image data +is cropped to the raster bounds. If the raster height is +greater than that of the image, then the image data are +placed in the lower part of the raster. (Note that the +raster is assume to be organized such that the pixel at +location (x,y) is +raster[y*width+x]; with the +raster origin in the lower-left hand corner.)

    + +

    TIFFReadRGBAImageOriented works like +TIFFReadRGBAImage with except of that user can +specify the raster origin position with the +orientation parameter. Four orientations +supported:

    +
    + + + + + +
    +

    ORIENTATION_TOPLEFT

    + + + + + +
    +

    origin in top-left corner,

    +
    + + + + + +
    +

    ORIENTATION_TOPRIGHT

    + + + + + +
    +

    origin in top-right corner,

    +
    + + + + + +
    +

    ORIENTATION_BOTLEFT

    + + + + + +
    +

    origin in bottom-left corner and

    +
    + + + + + +
    +

    ORIENTATION_BOTRIGHT

    + + + + + +
    +

    origin in bottom-right corner.

    +
    + + + + + +
    +

    If you choose ORIENTATION_BOTLEFT result will be +the same as returned by the TIFFReadRGBAImage.

    + +

    Raster pixels are 8-bit packed red, green, blue, alpha +samples. The macros TIFFGetR, TIFFGetG, +TIFFGetB, and TIFFGetA should be used to +access individual samples. Images without Associated Alpha +matting information have a constant Alpha of 1.0 (255).

    + +

    TIFFReadRGBAImage converts non-8-bit images by +scaling sample values. Palette, grayscale, bilevel, +CMYK , and YCbCr images are converted to +RGB transparently. Raster pixels are returned +uncorrected by any colorimetry information present in the +directory.

    + +

    The paramater stopOnError specifies how to act if +an error is encountered while reading the image. If +stopOnError is non-zero, then an error will terminate +the operation; otherwise TIFFReadRGBAImage will +continue processing data until all the possible data in the +image have been requested.

    +
    + +

    NOTES

    + + + + + +
    +

    In C++ the stopOnError parameter defaults to +0.

    + +

    Samples must be either 1, 2, 4, 8, or 16 bits. +Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. +SamplesPerPixel minus ExtraSamples).

    + +

    Palettte image colormaps that appear to be incorrectly +written as 8-bit values are automatically scaled to +16-bits.

    + +

    TIFFReadRGBAImage is just a wrapper around the +more general TIFFRGBAImage(3TIFF) facilities.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    1 is returned if the image was successfully read and +converted. Otherwise, 0 is returned if an error was +encountered and stopOnError is zero.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    Sorry, can not handle %d-bit pictures. The image +had BitsPerSample other than 1, 2, 4, 8, or 16.

    + +

    Sorry, can not handle %d-channel images. The image +had SamplesPerPixel other than 1, 3, or 4.

    + +

    Missing needed "PhotometricInterpretation" +tag. The image did not have a tag that describes how to +display the data.

    + +

    No "PhotometricInterpretation" tag, assuming +RGB. The image was missing a tag that describes how to +display it, but because it has 3 or 4 samples/pixel, it is +assumed to be RGB.

    + +

    No "PhotometricInterpretation" tag, assuming +min-is-black. The image was missing a tag that describes +how to display it, but because it has 1 sample/pixel, it is +assumed to be a grayscale or bilevel image.

    + +

    No space for photometric conversion table. There +was insufficient memory for a table used to convert image +samples to 8-bit RGB.

    + +

    Missing required "Colormap" tag. A +Palette image did not have a required Colormap +tag.

    + +

    No space for tile buffer. There was insufficient +memory to allocate an i/o buffer.

    + +

    No space for strip buffer. There was insufficient +memory to allocate an i/o buffer.

    + +

    Can not handle format. The image has a format +(combination of BitsPerSample, +SamplesPerPixel, and +PhotometricInterpretation) that +TIFFReadRGBAImage can not handle.

    + +

    No space for B&W mapping table. There was +insufficient memory to allocate a table used to map +grayscale data to RGB.

    + +

    No space for Palette mapping table. There was +insufficient memory to allocate a table used to map data to +8-bit RGB.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), TIFFRGBAImage(3TIFF), +TIFFReadRGBAStrip(3TIFF), +TIFFReadRGBATile(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBAStrip.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBAStrip.3tiff.html new file mode 100644 index 000000000..37d36d3c3 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBAStrip.3tiff.html @@ -0,0 +1,208 @@ + + + + + + +TIFFReadRGBAStrip + + + +

    TIFFReadRGBAStrip

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFReadRGBAStrip − read and decode an image strip +into a fixed-format raster

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    #define TIFFGetR(abgr) ((abgr) & 0xff)
    +#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff)
    +#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff)
    +#define TIFFGetA(abgr) (((abgr) >> 24) & +0xff)

    + +

    int TIFFReadRGBAStrip(TIFF *tif, +uint32 row, uint32 +*raster)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFReadRGBAStrip reads a single strip of a +strip-based image into memory, storing the result in the +user supplied RGBA raster. The raster is assumed to +be an array of width times rowsperstrip 32-bit entries, +where width is the width of the image (TIFFTAG_IMAGEWIDTH) +and rowsperstrip is the maximum lines in a strip +(TIFFTAG_ROWSPERSTRIP).

    + +

    The row value should be the row of the first row +in the strip (strip * rowsperstrip, zero based).

    + +

    Note that the raster is assume to be organized such that +the pixel at location (x,y) is +raster[y*width+x]; with the +raster origin in the lower-left hand corner of the +strip. That is bottom to top organization. When reading a +partial last strip in the file the last line of the image +will begin at the beginning of the buffer.

    + +

    Raster pixels are 8-bit packed red, green, blue, alpha +samples. The macros TIFFGetR, TIFFGetG, +TIFFGetB, and TIFFGetA should be used to +access individual samples. Images without Associated Alpha +matting information have a constant Alpha of 1.0 (255).

    + +

    See the TIFFRGBAImage(3TIFF) page for more details +on how various image types are converted to RGBA values.

    +
    + +

    NOTES

    + + + + + +
    +

    Samples must be either 1, 2, 4, 8, or 16 bits. +Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. +SamplesPerPixel minus ExtraSamples).

    + +

    Palette image colormaps that appear to be incorrectly +written as 8-bit values are automatically scaled to +16-bits.

    + +

    TIFFReadRGBAStrip is just a wrapper around the +more general TIFFRGBAImage(3TIFF) facilities. +It’s main advantage over the similar +TIFFReadRGBAImage() function is that for large images +a single buffer capable of holding the whole image +doesn’t need to be allocated, only enough for one +strip. The TIFFReadRGBATile() function does a similar +operation for tiled images.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    1 is returned if the image was successfully read and +converted. Otherwise, 0 is returned if an error was +encountered.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    Sorry, can not handle %d-bit pictures. The image +had BitsPerSample other than 1, 2, 4, 8, or 16.

    + +

    Sorry, can not handle %d-channel images. The image +had SamplesPerPixel other than 1, 3, or 4.

    + +

    Missing needed "PhotometricInterpretation" +tag. The image did not have a tag that describes how to +display the data.

    + +

    No "PhotometricInterpretation" tag, assuming +RGB. The image was missing a tag that describes how to +display it, but because it has 3 or 4 samples/pixel, it is +assumed to be RGB.

    + +

    No "PhotometricInterpretation" tag, assuming +min-is-black. The image was missing a tag that describes +how to display it, but because it has 1 sample/pixel, it is +assumed to be a grayscale or bilevel image.

    + +

    No space for photometric conversion table. There +was insufficient memory for a table used to convert image +samples to 8-bit RGB.

    + +

    Missing required "Colormap" tag. A +Palette image did not have a required Colormap +tag.

    + +

    No space for tile buffer. There was insufficient +memory to allocate an i/o buffer.

    + +

    No space for strip buffer. There was insufficient +memory to allocate an i/o buffer.

    + +

    Can not handle format. The image has a format +(combination of BitsPerSample, +SamplesPerPixel, and +PhotometricInterpretation) that +TIFFReadRGBAImage can not handle.

    + +

    No space for B&W mapping table. There was +insufficient memory to allocate a table used to map +grayscale data to RGB.

    + +

    No space for Palette mapping table. There was +insufficient memory to allocate a table used to map data to +8-bit RGB.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), TIFFRGBAImage(3TIFF), +TIFFReadRGBAImage(3TIFF), +TIFFReadRGBATile(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBATile.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBATile.3tiff.html new file mode 100644 index 000000000..6bd298a2d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRGBATile.3tiff.html @@ -0,0 +1,261 @@ + + + + + + +TIFFReadRGBATile + + + +

    TIFFReadRGBATile

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFReadRGBATile − read and decode an image tile +into a fixed-format raster

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    #define TIFFGetR(abgr)

    +    		 + +

    ((abgr) & 0xff)

    +
    + +

    #define TIFFGetG(abgr)

    +    		 + +

    (((abgr) >> 8) & 0xff)

    +
    + +

    #define TIFFGetB(abgr)

    +    		 + +

    (((abgr) >> 16) & 0xff)

    +
    + +

    #define TIFFGetA(abgr)

    +    		 + +

    (((abgr) >> 24) & 0xff)

    +
    + + + + + +
    +

    int TIFFReadRGBATile(TIFF *tif, +uint32 x, uint32 y, uint32 +*raster)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFReadRGBATile reads a single tile of a +tile-based image into memory, storing the result in the user +supplied RGBA raster. The raster is assumed to be an +array of width times length 32-bit entries, where width is +the width of a tile (TIFFTAG_TILEWIDTH) and length is the +height of a tile (TIFFTAG_TILELENGTH).

    + +

    The x and y values are the offsets from the +top left corner to the top left corner of the tile to be +read. They must be an exact multiple of the tile width and +length.

    + +

    Note that the raster is assume to be organized such that +the pixel at location (x,y) is +raster[y*width+x]; with the +raster origin in the lower-left hand corner of the +tile. That is bottom to top organization. Edge tiles which +partly fall off the image will be filled out with +appropriate zeroed areas.

    + +

    Raster pixels are 8-bit packed red, green, blue, alpha +samples. The macros TIFFGetR, TIFFGetG, +TIFFGetB, and TIFFGetA should be used to +access individual samples. Images without Associated Alpha +matting information have a constant Alpha of 1.0 (255).

    + +

    See the TIFFRGBAImage(3TIFF) page for more details +on how various image types are converted to RGBA values.

    +
    + +

    NOTES

    + + + + + +
    +

    Samples must be either 1, 2, 4, 8, or 16 bits. +Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. +SamplesPerPixel minus ExtraSamples).

    + +

    Palette image colormaps that appear to be incorrectly +written as 8-bit values are automatically scaled to +16-bits.

    + +

    TIFFReadRGBATile is just a wrapper around the more +general TIFFRGBAImage(3TIFF) facilities. It’s +main advantage over the similar TIFFReadRGBAImage() +function is that for large images a single buffer capable of +holding the whole image doesn’t need to be allocated, +only enough for one tile. The TIFFReadRGBAStrip() +function does a similar operation for stripped images.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    1 is returned if the image was successfully read and +converted. Otherwise, 0 is returned if an error was +encountered.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    Sorry, can not handle %d-bit pictures. The image +had BitsPerSample other than 1, 2, 4, 8, or 16.

    + +

    Sorry, can not handle %d-channel images. The image +had SamplesPerPixel other than 1, 3, or 4.

    + +

    Missing needed "PhotometricInterpretation" +tag. The image did not have a tag that describes how to +display the data.

    + +

    No "PhotometricInterpretation" tag, assuming +RGB. The image was missing a tag that describes how to +display it, but because it has 3 or 4 samples/pixel, it is +assumed to be RGB.

    + +

    No "PhotometricInterpretation" tag, assuming +min-is-black. The image was missing a tag that describes +how to display it, but because it has 1 sample/pixel, it is +assumed to be a grayscale or bilevel image.

    + +

    No space for photometric conversion table. There +was insufficient memory for a table used to convert image +samples to 8-bit RGB.

    + +

    Missing required "Colormap" tag. A +Palette image did not have a required Colormap +tag.

    + +

    No space for tile buffer. There was insufficient +memory to allocate an i/o buffer.

    + +

    No space for strip buffer. There was insufficient +memory to allocate an i/o buffer.

    + +

    Can not handle format. The image has a format +(combination of BitsPerSample, +SamplesPerPixel, and +PhotometricInterpretation) that +TIFFReadRGBAImage can not handle.

    + +

    No space for B&W mapping table. There was +insufficient memory to allocate a table used to map +grayscale data to RGB.

    + +

    No space for Palette mapping table. There was +insufficient memory to allocate a table used to map data to +8-bit RGB.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), TIFFRGBAImage(3TIFF), +TIFFReadRGBAImage(3TIFF), +TIFFReadRGBAStrip(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRawStrip.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRawStrip.3tiff.html new file mode 100644 index 000000000..4dd1fbccd --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRawStrip.3tiff.html @@ -0,0 +1,109 @@ + + + + + + +TIFFReadRawStrip + + + +

    TIFFReadRawStrip

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFReadRawStrip − return the undecoded contents of +a strip of data from an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    tsize_t TIFFReadRawStrip(TIFF *tif, +tstrip_t strip, tdata_t buf, +tsize_t size)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Read the contents of the specified strip into the (user +supplied) data buffer. Note that the value of strip +is a ‘‘raw strip number.’’ That is, +the caller must take into account whether or not the data is +organized in separate planes (PlanarConfiguration=2). +To read a full strip of data the data buffer should +typically be at least as large as the number returned by +TIFFStripSize.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    The actual number of bytes of data that were placed in +buf is returned; TIFFReadEncodedStrip returns +−1 if an error was encountered.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), +TIFFReadEncodedStrip(3TIFF), +TIFFReadScanline(3TIFF), TIFFStripSize(3TIFF), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRawTile.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRawTile.3tiff.html new file mode 100644 index 000000000..e74295bed --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadRawTile.3tiff.html @@ -0,0 +1,111 @@ + + + + + + +TIFFReadRawTile + + + +

    TIFFReadRawTile

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFReadRawTile − return an undecoded tile of data +from an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    tsize_t TIFFReadRawTile(TIFF *tif, +ttile_t tile, tdata_t buf, +tsize_t size)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Read the contents of the specified tile into the (user +supplied) data buffer. Note that the value of tile is +a ‘‘raw tile number.’’ That is, the +caller must take into account whether or not the data is +organized in separate planes (PlanarConfiguration=2). +TIFFComputeTile automatically does this when +converting an (x,y,z,sample) coordinate quadruple to a tile +number. To read a full tile of data the data buffer should +typically be at least as large as the value returned by +TIFFTileSize.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    The actual number of bytes of data that were placed in +buf is returned; TIFFReadEncodedTile returns +−1 if an error was encountered.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), +TIFFReadEncodedTile(3TIFF), +TIFFReadTile(3TIFF), TIFFTileSize(3TIFF), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadScanline.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadScanline.3tiff.html new file mode 100644 index 000000000..e825e4cbf --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadScanline.3tiff.html @@ -0,0 +1,157 @@ + + + + + + +TIFFReadScanline + + + +

    TIFFReadScanline

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFReadScanline − read and decode a scanline of +data from an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    int TIFFReadScanline(TIFF *tif, +tdata_t buf, uint32 row, +tsample_t sample)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Read the data for the specified row into the (user +supplied) data buffer buf. The data are returned +decompressed and, in the native byte- and bit-ordering, but +are otherwise packed (see further below). The buffer must be +large enough to hold an entire scanline of data. +Applications should call the routine TIFFScanlineSize +to find out the size (in bytes) of a scanline buffer. The +row parameter is always used by +TIFFReadScanline; the sample parameter is used +only if data are organized in separate planes +(PlanarConfiguration=2).

    +
    + +

    NOTES

    + + + + + +
    +

    The library attempts to hide bit- and byte-ordering +differences between the image and the native machine by +converting data to the native machine order. Bit reversal is +done if the FillOrder tag is opposite to the native +machine bit order. 16- and 32-bit samples are automatically +byte-swapped if the file was written with a byte order +opposite to the native machine byte order,

    + +

    In C++ the sample parameter defaults to 0.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    TIFFReadScanline returns −1 if it detects an +error; otherwise 1 is returned.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    Compression algorithm does not support random +access. Data was requested in a non-sequential order +from a file that uses a compression algorithm and that has +RowsPerStrip greater than one. That is, data in the +image is stored in a compressed form, and with multiple rows +packed into a strip. In this case, the library does not +support random access to the data. The data should either be +accessed sequentially, or the file should be converted so +that each strip is made up of one row of data.

    +
    + +

    BUGS

    + + + + + +
    +

    Reading subsampled YCbCR data does not work correctly +because, for PlanarConfiguration=2 the size of a +scanline is not calculated on a per-sample basis, and for +PlanarConfiguration=1 the library does not unpack the +block-interleaved samples; use the strip- and tile-based +interfaces to read these formats.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), +TIFFReadEncodedStrip(3TIFF), +TIFFReadRawStrip(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadTile.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadTile.3tiff.html new file mode 100644 index 000000000..be245f88d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFReadTile.3tiff.html @@ -0,0 +1,133 @@ + + + + + + +TIFFReadTile + + + +

    TIFFReadTile

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFReadTile − read and decode a tile of data from +an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    tsize_t TIFFReadTile(TIFF *tif, +tdata_t buf, uint32 x, +uint32 y, uint32 z, +tsample_t sample)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Return the data for the tile containing the +specified coordinates. The data placed in buf are +returned decompressed and, typically, in the native byte- +and bit-ordering, but are otherwise packed (see further +below). The buffer must be large enough to hold an entire +tile of data. Applications should call the routine +TIFFTileSize to find out the size (in bytes) of a +tile buffer. The x and y parameters are always +used by TIFFReadTile. The z parameter is used +if the image is deeper than 1 slice +(ImageDepth>1). The sample parameter is +used only if data are organized in separate planes +(PlanarConfiguration=2).

    +
    + +

    NOTES

    + + + + + +
    +

    The library attempts to hide bit- and byte-ordering +differences between the image and the native machine by +converting data to the native machine order. Bit reversal is +done if the FillOrder tag is opposite to the native +machine bit order. 16- and 32-bit samples are automatically +byte-swapped if the file was written with a byte order +opposite to the native machine byte order,

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    TIFFReadTile returns −1 if it detects an +error; otherwise the number of bytes in the decoded tile is +returned.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFCheckTile(3TIFF), +TIFFComputeTile(3TIFF), TIFFOpen(3TIFF), +TIFFReadEncodedTile(3TIFF), +TIFFReadRawTile(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFSetDirectory.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFSetDirectory.3tiff.html new file mode 100644 index 000000000..9047b0bcd --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFSetDirectory.3tiff.html @@ -0,0 +1,122 @@ + + + + + + +TIFFSetDirectory + + + +

    TIFFSetDirectory

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFSetDirectory, TIFFSetSubDirectory − set the +current directory for an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    int TIFFSetDirectory(TIFF *tif, +tdir_t dirnum)
    +int TIFFSetSubDirectory(TIFF *    tif, uint32 +diroff)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFSetDirectory changes the current directory and +reads its contents with TIFFReadDirectory. The +parameter dirnum specifies the subfile/directory as +an integer number, with the first directory numbered +zero.

    + +

    TIFFSetSubDirectory acts like +TIFFSetDirectory, except the directory is specified +as a file offset instead of an index; this is required for +accessing subdirectories linked through a SubIFD +tag.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    On successful return 1 is returned. Otherwise, 0 is +returned if dirnum or diroff specifies a +non-existent directory, or if an error was encountered while +reading the directory’s contents.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    %s: Error fetching directory count. An error was +encountered while reading the ‘‘directory +count’’ field.

    + +

    %s: Error fetching directory link. An error was +encountered while reading the ‘‘link +value’’ that points to the next directory in a +file.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFCurrentDirectory(3TIFF), +TIFFOpen(3TIFF), TIFFReadDirectory(3TIFF), +TIFFWriteDirectory(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFSetField.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFSetField.3tiff.html new file mode 100644 index 000000000..f160fedd1 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFSetField.3tiff.html @@ -0,0 +1,1865 @@ + + + + + + + + + +TIFFSetField + + + + +

    TIFFSetField

    + +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + + +

    NAME + +

    + + +

    TIFFSetField, +TIFFVSetField − set the value(s) of a tag in a +TIFF file open for writing

    + +

    SYNOPSIS + +

    + + +

    #include +<tiffio.h>

    + +

    int +TIFFSetField(TIFF *tif, ttag_t +tag, ...)

    + +

    #include +<stdarg.h>

    + +

    int +TIFFVSetField(TIFF *tif, ttag_t +tag, va_list ap)

    + +

    DESCRIPTION + +

    + + + +

    TIFFSetField +sets the value of a field or pseudo-tag in the current +directory associated with the open TIFF file +tif. (A pseudo-tag is a parameter that is used +to control the operation of the TIFF library +but whose value is not read or written to the underlying +file.) To set the value of a field the file must have been +previously opened for writing with TIFFOpen(3TIFF); +pseudo-tags can be set whether the file was opened for +reading or writing. The field is identified by tag, +one of the values defined in the include file tiff.h +(see also the table below). The actual value is specified +using a variable argument list, as prescribed by the +stdarg(3) interface (or, on some machines, the +varargs(3) interface.)

    + + +

    TIFFVSetField +is functionally equivalent to TIFFSetField except +that it takes a pointer to a variable argument list. +TIFFVSetField is useful for writing routines that are +layered on top of the functionality provided by +TIFFSetField.

    + +

    The tags +understood by libtiff, the number of parameter +values, and the expected types for the parameter values are +shown below. The data types are: char* is +null-terminated string and corresponds to the +ASCII data type; uint16 is an unsigned +16-bit value; uint32 is an unsigned 32-bit value; +uint16* is an array of unsigned 16-bit values. +void* is an array of data values of unspecified +type.

    + +

    Consult the +TIFF specification for information on the +meaning of each tag.

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + + +

    Tag Name

    		 + + +

    Count

    		 +
    + + +

    Types

    		 + + +

    Notes

    + + +

    TIFFTAG_ARTIST

    		 + + +

    1

    		 +
    + + +

    char*

    		 +
    + + +

    TIFFTAG_BADFAXLINES

    		 + + +

    1

    		 +
    + + +

    uint32

    		 +
    + + +

    TIFFTAG_BITSPERSAMPLE

    		 + + +

    1

    		 +
    + + +

    uint16

    		 + + +

    †

    + + +

    TIFFTAG_CLEANFAXDATA

    		 + + +

    1

    		 +
    + + +

    uint16

    		 +
    + + +

    TIFFTAG_COLORMAP

    		 + + +

    3

    		 +
    + + +

    uint16*

    		 + + +

    1<<BitsPerSample arrays

    + + +

    TIFFTAG_COMPRESSION

    		 + + +

    1

    		 +
    + + +

    uint16

    		 + + +

    †

    + + +

    TIFFTAG_CONSECUTIVEBADFAXLINES

    		 + + +

    1

    		 +
    + + +

    uint32

    		 +
    + + +

    TIFFTAG_COPYRIGHT

    		 + + +

    1

    		 +
    + + +

    char*

    		 +
    + + +

    TIFFTAG_DATETIME

    		 + + +

    1

    		 +
    + + +

    char*

    		 +
    + + +

    TIFFTAG_DOCUMENTNAME

    		 + + +

    1

    		 +
    + + +

    char*

    		 +
    + + +

    TIFFTAG_DOTRANGE

    		 + + +

    2

    		 +
    + + +

    uint16

    		 +
    + + +

    TIFFTAG_EXTRASAMPLES

    		 + + +

    2

    		 +
    + + +

    uint16,uint16*

    		 + + +

    † count & types array

    + + +

    TIFFTAG_FAXFILLFUNC

    		 + + +

    1

    		 +
    + + +

    TIFFFaxFillFunc

    		 + + +

    G3/G4 compression pseudo-tag

    + + +

    TIFFTAG_FAXMODE

    		 + + +

    1

    		 +
    + + +

    int

    		 + + +

    † G3/G4 compression pseudo-tag

    + + +

    TIFFTAG_FILLORDER

    		 + + +

    1

    		 +
    + + +

    uint16

    		 + + +

    †

    + + +

    TIFFTAG_GROUP3OPTIONS

    		 + + +

    1

    		 +
    + + +

    uint32

    		 + + +

    †

    + + +

    TIFFTAG_GROUP4OPTIONS

    		 + + +

    1

    		 +
    + + +

    uint32

    		 + + +

    †

    + + +

    TIFFTAG_HALFTONEHINTS

    		 + + +

    2

    		 +
    + + +

    uint16

    		 +
    + + +

    TIFFTAG_HOSTCOMPUTER

    		 + + +

    1

    		 +
    + + +

    char*

    		 +
    + + +

    TIFFTAG_ICCPROFILE

    		 + + +

    2

    		 +
    + + +

    uint32,void*

    		 + + +

    count, profile data

    + + +

    TIFFTAG_IMAGEDEPTH

    		 + + +

    1

    		 +
    + + +

    uint32

    		 + + +

    †

    + + +

    TIFFTAG_IMAGEDESCRIPTION

    		 + + +

    1

    		 +
    + + +

    char*

    		 +
    + + +

    TIFFTAG_IMAGELENGTH

    		 + + +

    1

    		 +
    + + +

    uint32

    		 +
    + + +

    TIFFTAG_IMAGEWIDTH

    		 + + +

    1

    		 +
    + + +

    uint32

    		 + + +

    †

    + + +

    TIFFTAG_INKNAMES

    		 + + +

    2

    		 +
    + + +

    uint16, char*

    		 +
    + + +

    TIFFTAG_INKSET

    		 + + +

    1

    		 +
    + + +

    uint16

    		 + + +

    †

    + + +

    TIFFTAG_JPEGCOLORMODE

    		 + + +

    1

    		 +
    + + +

    int

    		 + + +

    † JPEG pseudo-tag

    + + +

    TIFFTAG_JPEGQUALITY

    		 + + +

    1

    		 +
    + + +

    int

    		 + + +

    JPEG pseudo-tag

    + + +

    TIFFTAG_JPEGTABLES

    		 + + +

    2

    		 +
    + + +

    uint32*,void*

    		 + + +

    † count & tables

    + + +

    TIFFTAG_JPEGTABLESMODE

    		 + + +

    1

    		 +
    + + +

    int

    		 + + +

    † JPEG pseudo-tag

    + + +

    TIFFTAG_MAKE

    		 + + +

    1

    		 +
    + + +

    char*

    		 +
    + + +

    TIFFTAG_MATTEING

    		 + + +

    1

    		 +
    + + +

    uint16

    		 + + +

    †

    + + +

    TIFFTAG_MAXSAMPLEVALUE

    		 + + +

    1

    		 +
    + + +

    uint16

    		 +
    + + +

    TIFFTAG_MINSAMPLEVALUE

    		 + + +

    1

    		 +
    + + +

    uint16

    		 +
    + + +

    TIFFTAG_MODEL

    		 + + +

    1

    		 +
    + + +

    char*

    		 +
    + + +

    TIFFTAG_ORIENTATION

    		 + + +

    1

    		 +
    + + +

    uint16

    		 +
    + + +

    TIFFTAG_PAGENAME

    		 + + +

    1

    		 +
    + + +

    char*

    		 +
    + + +

    TIFFTAG_PAGENUMBER

    		 + + +

    2

    		 +
    + + +

    uint16

    		 +
    + + +

    TIFFTAG_PHOTOMETRIC

    		 + + +

    1

    		 +
    + + +

    uint16

    		 +
    + + +

    TIFFTAG_PHOTOSHOP

    		 + + +

    ?

    		 +
    + + +

    uint32,void*

    		 + + +

    count, data

    + + +

    TIFFTAG_PLANARCONFIG

    		 + + +

    1

    		 +
    + + +

    uint16

    		 + + +

    †

    + + +

    TIFFTAG_PREDICTOR

    		 + + +

    1

    		 +
    + + +

    uint16

    		 + + +

    †

    + + +

    TIFFTAG_PRIMARYCHROMATICITIES

    		 + + +

    1

    		 +
    + + +

    float*

    		 + + +

    6-entry array

    + + +

    TIFFTAG_REFERENCEBLACKWHITE

    		 + + +

    1

    		 +
    + + +

    float*

    		 + + +

    † 6-entry array

    + + +

    TIFFTAG_RESOLUTIONUNIT

    		 + + +

    1

    		 +
    + + +

    uint16

    		 +
    + + +

    TIFFTAG_RICHTIFFIPTC

    		 + + +

    2

    		 +
    + + +

    uint32,void*

    		 + + +

    count, data

    + + +

    TIFFTAG_ROWSPERSTRIP

    		 + + +

    1

    		 +
    + + +

    uint32

    		 + + +

    † must be > 0

    + + +

    TIFFTAG_SAMPLEFORMAT

    		 + + +

    1

    		 +
    + + +

    uint16

    		 + + +

    †

    + + +

    TIFFTAG_SAMPLESPERPIXEL

    		 + + +

    1

    		 +
    + + +

    uint16

    		 + + +

    † value must be <= 4

    + + +

    TIFFTAG_SMAXSAMPLEVALUE

    		 + + +

    1

    		 +
    + + +

    double

    		 +
    + + +

    TIFFTAG_SMINSAMPLEVALUE

    		 + + +

    1

    		 +
    + + +

    double

    		 +
    + + +

    TIFFTAG_SOFTWARE

    		 + + +

    1

    		 +
    + + +

    char*

    		 +
    + + +

    TIFFTAG_STONITS

    		 + + +

    1

    		 +
    + + +

    double

    		 + + +

    †

    + + +

    TIFFTAG_SUBFILETYPE

    		 + + +

    1

    		 +
    + + +

    uint32

    		 +
    + + +

    TIFFTAG_SUBIFD

    		 + + +

    2

    		 +
    + + +

    uint16,uint32*

    		 + + +

    count & offsets array

    + + +

    TIFFTAG_TARGETPRINTER

    		 + + +

    1

    		 +
    + + +

    char*

    		 +
    + + +

    TIFFTAG_THRESHHOLDING

    		 + + +

    1

    		 +
    + + +

    uint16

    		 +
    + + +

    TIFFTAG_TILEDEPTH

    		 + + +

    1

    		 +
    + + +

    uint32

    		 + + +

    †

    + + +

    TIFFTAG_TILELENGTH

    		 + + +

    1

    		 +
    + + +

    uint32

    		 + + +

    † must be a multiple of 8

    + + +

    TIFFTAG_TILEWIDTH

    		 + + +

    1

    		 +
    + + +

    uint32

    		 + + +

    † must be a multiple of 8

    + + +

    TIFFTAG_TRANSFERFUNCTION

    		 + + +

    1 or 3‡ uint16*

    		 + + +

    1<<BitsPerSample entry arrays

    + + +

    TIFFTAG_WHITEPOINT

    		 + + +

    1

    		 +
    + + +

    float*

    		 + + +

    2-entry array

    + + +

    TIFFTAG_XMLPACKET

    		 + + +

    2

    		 +
    + + +

    uint32,void*

    		 + + +

    count, data

    + + +

    TIFFTAG_XPOSITION

    		 + + +

    1

    		 +
    + + +

    float

    		 +
    + + +

    TIFFTAG_XRESOLUTION

    		 + + +

    1

    		 +
    + + +

    float

    		 +
    + + +

    TIFFTAG_YCBCRCOEFFICIENTS

    		 + + +

    1

    		 +
    + + +

    float*

    		 + + +

    † 3-entry array

    + + +

    TIFFTAG_YCBCRPOSITIONING

    		 + + +

    1

    		 +
    + + +

    uint16

    		 + + +

    †

    + + +

    TIFFTAG_YCBCRSAMPLING

    		 + + +

    2

    		 +
    + + +

    uint16

    		 + + +

    †

    + + +

    TIFFTAG_YPOSITION

    		 + + +

    1

    		 +
    + + +

    float

    		 +
    + + +

    TIFFTAG_YRESOLUTION

    		 + + +

    1

    		 +
    + + +

    float

    		 +
    + +

    † Tag may not have its +values changed once data is written.
    +‡ If SamplesPerPixel is one, then a single +array is passed; otherwise three arrays should be passed. +
    +* The contents of this field are quite complex. See The +ICC Profile Format Specification, Annex B.3 +"Embedding ICC Profiles in TIFF Files" (available +at http://www.color.org) for an explanation.

    + +

    RETURN VALUES + +

    + + +

    1 is returned +if the operation was successful. Otherwise, 0 is returned if +an error was detected.

    + +

    DIAGNOSTICS + +

    + + +

    All error +messages are directed to the TIFFError(3TIFF) +routine.

    + +

    %s: Cannot +modify tag "%s" while writing. Data has +already been written to the file, so the specified +tag’s value can not be changed. This restriction is +applied to all tags that affect the format of written +data.

    + +

    %d: Bad +value for "%s". An invalid value was supplied +for the named tag.

    + +

    SEE ALSO + +

    + + + +

    TIFFOpen(3TIFF), +TIFFGetField(3TIFF), TIFFSetDirectory(3TIFF), +TIFFWriteDirectory(3TIFF), +TIFFReadDirectory(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library +home page: http://www.remotesensing.org/libtiff/

    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFWarning.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWarning.3tiff.html new file mode 100644 index 000000000..18f2e8b43 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWarning.3tiff.html @@ -0,0 +1,108 @@ + + + + + + +TIFFWarning + + + +

    TIFFWarning

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFWarning, TIFFSetWarningHandler − library +warning interface

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    void TIFFWarning(const char *module, +const char *fmt, ...)

    + +

    #include <stdarg.h>

    + +

    typedef void (*TIFFWarningHandler)(const char +*module, const char *fmt, +va_list ap);

    + +

    TIFFWarningHandler +TIFFSetWarningHandler(TIFFWarningHandler +handler);

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFWarning invokes the library-wide warning +handler function to (normally) write a warning message to +the stderr. The fmt parameter is a +printf(3S) format string, and any number arguments +can be supplied. The module parameter is interpreted +as a string that, if non-zero, should be printed before the +message; it typically is used to identify the software +module in which a warning is detected.

    + +

    Applications that desire to capture control in the event +of a warning should use TIFFSetWarningHandler to +override the default warning handler. A NULL +(0) warning handler function may be installed to suppress +error messages.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    TIFFSetWarningHandler returns a reference to the +previous error handling function.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFError(3TIFF), libtiff(3TIFF), +printf(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteDirectory.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteDirectory.3tiff.html new file mode 100644 index 000000000..1e72a5bec --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteDirectory.3tiff.html @@ -0,0 +1,176 @@ + + + + + + +TIFFWriteDirectory + + + +

    TIFFWriteDirectory

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFWriteDirectory, TIFFRewriteDirectory, +TIFFCheckpointDirectory − write the current directory +in an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    int TIFFWriteDirectory(TIFF *tif)
    +int TIFFRewriteDirectory(TIFF *    tif)
    +int TIFFCheckpointDirectory(TIFF *    tif)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFWriteDirectory will write the contents of the +current directory to the file and setup to create a new +subfile in the same file. Applications only need to call +TIFFWriteDirectory when writing multiple subfiles to +a single TIFF file. TIFFWriteDirectory +is automatically called by TIFFClose and +TIFFFlush to write a modified directory if the file +is open for writing.

    + +

    The TIFFRewriteDirectory function operates +similarly to TIFFWriteDirectory, but can be called +with directories previously read or written that already +have an established location in the file. It will rewrite +the directory, but instead of place it at it’s old +location (as TIFFWriteDirectory would) it will place +them at the end of the file, correcting the pointer from the +preceeding directory or file header to point to it’s +new location. This is particularly important in cases where +the size of the directory and pointed to data has grown, so +it won’t fit in the space available at the old +location.

    + +

    The TIFFCheckpointDirectory writes the current +state of the tiff directory into the file to make what is +currently in the file readable. Unlike +TIFFWriteDirectory, TIFFCheckpointDirectory does not +free up the directory data structures in memory, so they can +be updated (as strips/tiles are written) and written again. +Reading such a partial file you will at worst get a tiff +read error for the first strip/tile encountered that is +incomplete, but you will at least get all the valid data in +the file before that. When the file is complete, just use +TIFFWriteDirectory as usual to finish it off +cleanly.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    1 is returned when the contents are successfully written +to the file. Otherwise, 0 is returned if an error was +encountered when writing the directory contents.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    Error post-encoding before directory write. Before +writing the contents of the current directory, any pending +data are flushed. This message indicates that an error +occurred while doing this.

    + +

    Error flushing data before directory write. Before +writing the contents of the current directory, any pending +data are flushed. This message indicates that an error +occurred while doing this.

    + +

    Cannot write directory, out of space. There was +not enough space to allocate a temporary area for the +directory that was to be written.

    + +

    Error writing directory count. A write error +occurred when writing the count of fields in the +directory.

    + +

    Error writing directory contents. A write error +occurred when writing the directory fields.

    + +

    Error writing directory link. A write error +occurred when writing the link to the next directory.

    + +

    Error writing data for field "%s". A +write error occurred when writing indirect data for the +specified field.

    + +

    Error writing TIFF header. A write error occurred +when re-writing header at the front of the file.

    + +

    Error fetching directory count. A read error +occurred when fetching the directory count field for a +previous directory. This can occur when setting up a link to +the directory that is being written.

    + +

    Error fetching directory link. A read error +occurred when fetching the directory link field for a +previous directory. This can occur when setting up a link to +the directory that is being written.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), TIFFError(3TIFF), +TIFFReadDirectory(3TIFF), +TIFFSetDirectory(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteEncodedStrip.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteEncodedStrip.3tiff.html new file mode 100644 index 000000000..3b90199a0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteEncodedStrip.3tiff.html @@ -0,0 +1,153 @@ + + + + + + +TIFFWriteEncodedStrip + + + +

    TIFFWriteEncodedStrip

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFWritedEncodedStrip − compress and write a +strip of data to an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    tsize_t TIFFWriteEncodedStrip(TIFF +*tif, tstrip_t strip, +tdata_t buf, tsize_t +size)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Compress size bytes of raw data from +buf and write the result to the specified strip; +replacing any previously written data. Note that the value +of strip is a ‘‘raw strip +number.’’ That is, the caller must take into +account whether or not the data are organized in separate +planes (PlanarConfiguration=2).

    +
    + +

    NOTES

    + + + + + +
    +

    The library writes encoded data using the native +machine byte order. Correctly implemented TIFF +readers are expected to do any necessary byte-swapping +to correctly process image data with BitsPerSample greater +than 8.

    + +

    The strip number must be valid according to the +current settings of the ImageLength and +RowsPerStrip tags. An image may be dynamically grown +by increasing the value of ImageLength prior to each +call to TIFFWriteEncodedStrip.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    −1 is returned if an error was encountered. +Otherwise, the value of size is returned.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    %s: File not open for writing. The file was +opened for reading, not writing.

    + +

    Can not write scanlines to a tiled image. The +image is assumed to be organized in tiles because the +TileWidth and TileLength tags have been set +with TIFFSetField(3TIFF).

    + +

    %s: Must set "ImageWidth" before +writing data. The image’s width has not be set +before the first write. See TIFFSetField(3TIFF) for +information on how to do this.

    + +

    %s: Must set "PlanarConfiguration" +before writing data. The organization of data has not be +defined before the first write. See +TIFFSetField(3TIFF) for information on how to do +this.

    + +

    %s: No space for strip arrays". There +was not enough space for the arrays that hold strip offsets +and byte counts.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), +TIFFWriteScanline(3TIFF), +TIFFWriteRawStrip(3TIFF), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteEncodedTile.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteEncodedTile.3tiff.html new file mode 100644 index 000000000..5e85f6ddb --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteEncodedTile.3tiff.html @@ -0,0 +1,147 @@ + + + + + + +TIFFWriteEncodedTile + + + +

    TIFFWriteEncodedTile

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFWritedEncodedTile − compress and write a +tile of data to an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    tsize_t TIFFWriteEncodedTile(TIFF +*tif, ttile_t tile, tdata_t +buf, tsize_t size)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Compress size bytes of raw data from +buf and append the result to the end of the +specified tile. Note that the value of tile is a +‘‘raw tile number.’’ That is, the +caller must take into account whether or not the data are +organized in separate places (PlanarConfiguration=2). +TIFFComputeTile automatically does this when +converting an (x,y,z,sample) coordinate quadruple to a tile +number.

    +
    + +

    NOTES

    + + + + + +
    +

    The library writes encoded data using the native +machine byte order. Correctly implemented TIFF +readers are expected to do any necessary byte-swapping +to correctly process image data with BitsPerSample greater +than 8.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    −1 is returned if an error was encountered. +Otherwise, the value of size is returned.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    %s: File not open for writing. The file was +opened for reading, not writing.

    + +

    Can not write tiles to a stripped image. The +image is assumed to be organized in strips because neither +of the TileWidth or TileLength tags have been +set with TIFFSetField(3TIFF).

    + +

    %s: Must set "ImageWidth" before +writing data. The image’s width has not be set +before the first write. See TIFFSetField(3TIFF) for +information on how to do this.

    + +

    %s: Must set "PlanarConfiguration" +before writing data. The organization of data has not be +defined before the first write. See +TIFFSetField(3TIFF) for information on how to do +this.

    + +

    %s: No space for tile arrays". There was +not enough space for the arrays that hold tile offsets and +byte counts.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), TIFFWriteTile(3TIFF), +TIFFWriteRawTile(3TIFF), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteRawStrip.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteRawStrip.3tiff.html new file mode 100644 index 000000000..9a3ef0c19 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteRawStrip.3tiff.html @@ -0,0 +1,144 @@ + + + + + + +TIFFWriteRawstrip + + + +

    TIFFWriteRawstrip

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFWriteRawStrip − write a strip of raw data to an +open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    tsize_t TIFFWriteRawStrip(TIFF *tif, +tstrip_t strip, tdata_t buf, +tsize_t size)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Append size bytes of raw data to the specified +strip.

    +
    + +

    NOTES

    + + + + + +
    +

    The strip number must be valid according to the current +settings of the ImageLength and RowsPerStrip +tags. An image may be dynamically grown by increasing the +value of ImageLength prior to each call to +TIFFWriteRawStrip.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    −1 is returned if an error occurred. Otherwise, the +value of size is returned.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    %s: File not open for writing. The file was opened +for reading, not writing.

    + +

    Can not write scanlines to a tiled image. The +image is assumed to be organized in tiles because the +TileWidth and TileLength tags have been set +with TIFFSetField(3TIFF).

    + +

    %s: Must set "ImageWidth" before writing +data. The image’s width has not be set before the +first write. See TIFFSetField(3TIFF) for information +on how to do this.

    + +

    %s: Must set "PlanarConfiguration" before +writing data. The organization of data has not be +defined before the first write. See +TIFFSetField(3TIFF) for information on how to do +this.

    + +

    %s: No space for strip arrays". There was not +enough space for the arrays that hold strip offsets and byte +counts.

    + +

    %s: Strip %d out of range, max %d. The specified +strip is not a valid strip according to the currently +specified image dimensions.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), +TIFFWriteEncodedStrip(3TIFF), +TIFFWriteScanline(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteRawTile.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteRawTile.3tiff.html new file mode 100644 index 000000000..639af6c71 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteRawTile.3tiff.html @@ -0,0 +1,128 @@ + + + + + + +TIFFWriteRawtile + + + +

    TIFFWriteRawtile

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFWriteRawTile − write a tile of raw data to an +open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    tsize_t TIFFWriteRawTile(TIFF *tif, +ttile_t tile, tdata_t buf, +tsize_t size)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Append size bytes of raw data to the specified +tile.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    −1 is returned if an error occurred. Otherwise, the +value of size is returned.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    %s: File not open for writing. The file was opened +for reading, not writing.

    + +

    Can not write tiles to a stripped image. The image +is assumed to be organized in strips because neither of the +TileWidth or TileLength tags have been set +with TIFFSetField(3TIFF).

    + +

    %s: Must set "ImageWidth" before writing +data. The image’s width has not be set before the +first write. See TIFFSetField(3TIFF) for information +on how to do this.

    + +

    %s: Must set "PlanarConfiguration" before +writing data. The organization of data has not be +defined before the first write. See +TIFFSetField(3TIFF) for information on how to do +this.

    + +

    %s: No space for tile arrays". There was not +enough space for the arrays that hold tile offsets and byte +counts.

    + +

    %s: Specified tile %d out of range, max %d. The +specified tile is not valid according to the currently +specified image dimensions.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), +TIFFWriteEncodedTile(3TIFF), +TIFFWriteScanline(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteScanline.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteScanline.3tiff.html new file mode 100644 index 000000000..4c68f9d4b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteScanline.3tiff.html @@ -0,0 +1,206 @@ + + + + + + +TIFFWriteScanline + + + +

    TIFFWriteScanline

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +NOTES
    +RETURN VALUES
    +DIAGNOSTICS
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFWriteScanline − write a scanline to an open +TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    int TIFFWriteScanline(TIFF *tif, +tdata_t buf, uint32 row, +tsample_t sample)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Write data to a file at the specified row. The +sample parameter is used only if data are organized +in separate planes (PlanarConfiguration=2). The data +are assumed to be uncompressed and in the native bit- and +byte-order of the host machine. The data written to the file +is compressed according to the compression scheme of the +current TIFF directory (see further below). +If the current scanline is past the end of the current +subfile, the ImageLength field is automatically +increased to include the scanline (except for +PlanarConfiguration=2, where the ImageLength +cannot be changed once the first data are written). If the +ImageLength is increased, the StripOffsets and +StripByteCounts fields are similarly enlarged to +reflect data written past the previous end of image.

    +
    + +

    NOTES

    + + + + + +
    +

    The library writes encoded data using the native machine +byte order. Correctly implemented TIFF +readers are expected to do any necessary byte-swapping to +correctly process image data with BitsPerSample greater than +8. The library attempts to hide bit-ordering differences +between the image and the native machine by converting data +from the native machine order.

    + +

    In C++ the sample parameter defaults to 0.

    + +

    Once data are written to a file for the current +directory, the values of certain tags may not be altered; +see TIFFSetField(3TIFF) for more information.

    + +

    It is not possible to write scanlines to a file that uses +a tiled organization. The routine TIFFIsTiled can be +used to determine if the file is organized as tiles or +strips.

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    TIFFWriteScanline returns −1 if it +immediately detects an error and 1 for a successful +write.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    + +

    %s: File not open for writing . The file was +opened for reading, not writing.

    + +

    Can not write scanlines to a tiled image. An +attempt was made to write a scanline to a tiled image. The +image is assumed to be organized in tiles because the +TileWidth and TileLength tags have been set +with TIFFSetField(3TIFF).

    + +

    Compression algorithm does not support random +access. Data was written in a non-sequential order to a +file that uses a compression algorithm and that has +RowsPerStrip greater than one. That is, data in the +image is to be stored in a compressed form, and with +multiple rows packed into a strip. In this case, the library +does not support random access to the data. The data should +either be written as entire strips, sequentially by rows, or +the value of RowsPerStrip should be set to one.

    + +

    %s: Must set "ImageWidth" before writing +data. The image’s width has not be set before the +first write. See TIFFSetField(3TIFF) for information +on how to do this.

    + +

    %s: Must set "PlanarConfiguration" before +writing data. The organization of data has not be +defined before the first write. See +TIFFSetField(3TIFF) for information on how to do +this.

    + +

    Can not change "ImageLength" when using +separate planes. Separate image planes are being used +(PlanarConfiguration=2), but the number of rows has +not been specified before the first write. The library +supports the dynamic growth of an image only when data are +organized in a contiguous manner +(PlanarConfiguration=1).

    + +

    %d: Sample out of range, max %d. The sample +parameter was greater than the value of the SamplesPerPixel +tag.

    + +

    %s: No space for strip arrays . There was not +enough space for the arrays that hold strip offsets and byte +counts.

    +
    + +

    BUGS

    + + + + + +
    +

    Writing subsampled YCbCR data does not work correctly +because, for PlanarConfiguration=2 the size of a +scanline is not calculated on a per-sample basis, and for +PlanarConfiguration=1 the library does not pack the +block-interleaved samples.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), +TIFFWriteEncodedStrip(3TIFF), +TIFFWriteRawStrip(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteTile.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteTile.3tiff.html new file mode 100644 index 000000000..6f6ffd23b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFWriteTile.3tiff.html @@ -0,0 +1,115 @@ + + + + + + +TIFFWriteTile + + + +

    TIFFWriteTile

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +RETURN VALUES
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFWriteTile − encode and write a tile of data to +an open TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    tsize_t TIFFWriteTile(TIFF *tif, +tdata_t buf, uint32 x, +uint32 y, uint32 z, +tsample_t sample)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Write the data for the tile containing the +specified coordinates. The data in buf are is +(potentially) compressed, and written to the indicated file, +normally being appended to the end of the file. The buffer +must be contain an entire tile of data. Applications should +call the routine TIFFTileSize to find out the size +(in bytes) of a tile buffer. The x and y +parameters are always used by TIFFWriteTile. The +z parameter is used if the image is deeper than 1 +slice (ImageDepth>1). The sample parameter +is used only if data are organized in separate planes +(PlanarConfiguration=2).

    +
    + +

    RETURN VALUES

    + + + + + +
    +

    TIFFWriteTile returns −1 if it detects an +error; otherwise the number of bytes in the tile is +returned.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    All error messages are directed to the +TIFFError(3TIFF) routine.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFCheckTile(3TIFF), +TIFFComputeTile(3TIFF), TIFFOpen(3TIFF), +TIFFReadTile(3TIFF), TIFFWriteScanline(3TIFF), +TIFFWriteEncodedTile(3TIFF), +TIFFWriteRawTile(3TIFF), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFbuffer.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFbuffer.3tiff.html new file mode 100644 index 000000000..09009b5fa --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFbuffer.3tiff.html @@ -0,0 +1,116 @@ + + + + + + +TIFFBUFFER + + + +

    TIFFBUFFER

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFReadBufferSetup, TIFFWriteBufferSetup − I/O +buffering control routines

    +
    + +

    SYNOPSIS

    + + + + + +
    +
    #include <tiffio.h>
+
+int TIFFReadBufferSetup(TIFF *tif, tdata_t buffer, tsize_t size);
+int TIFFWriteBufferSetup(TIFF *tif, tdata_t buffer, tsize_t size);
+
    +
    + +

    DESCRIPTION

    + + + + + + +
    +

    The following routines are provided for client-control of +the I/O buffers used by the library. Applications need never +use these routines; they are provided only for +‘‘intelligent clients’’ that wish to +optimize memory usage and/or eliminate potential copy +operations that can occur when working with images that have +data stored without compression.

    + +

    TIFFReadBufferSetup sets up the data buffer used +to read raw (encoded) data from a file. If the specified +pointer is NULL (zero), then a buffer of the +appropriate size is allocated. Otherwise the caller must +guarantee that the buffer is large enough to hold any +individual strip of raw data. TIFFReadBufferSetup +returns a non-zero value if the setup was successful and +zero otherwise.

    + +

    TIFFWriteBufferSetup sets up the data buffer used +to write raw (encoded) data to a file. If the specified +size is −1 then the buffer size is selected to +hold a complete tile or strip, or at least 8 kilobytes, +whichever is greater. If the specified buffer is +NULL (zero), then a buffer of the appropriate +size is dynamically allocated. TIFFWriteBufferSetup +returns a non-zero value if the setup was successful and +zero otherwise.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    %s: No space for data buffer at scanline %ld. +TIFFReadBufferSetup was unable to dynamically +allocate space for a data buffer.

    + +

    %s: No space for output buffer. +TIFFWriteBufferSetup was unable to dynamically +allocate space for a data buffer.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFcodec.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFcodec.3tiff.html new file mode 100644 index 000000000..d2007542f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFcodec.3tiff.html @@ -0,0 +1,116 @@ + + + + + + +CODEC + + + +

    CODEC

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFFindCODEC, TIFFRegisterCODEC, TIFFUnRegisterCODEC, +TIFFIsCODECConfigured − codec-related utility +routines

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    const TIFFCodec* TIFFFindCODEC(uint16 +scheme);
    +TIFFCodec* TIFFRegisterCODEC(uint16     scheme, +const char *method, TIFFInitMethod +init);
    +void TIFFUnRegisterCODEC(TIFFCodec +*    codec);
    +int TIFFIsCODECConfigured(uint16     +scheme);

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    libtiff supports a variety of compression schemes +implemented by software codecs. Each codec adheres to +a modular interface that provides for the decoding and +encoding of image data; as well as some other methods for +initialization, setup, cleanup, and the control of default +strip and tile sizes. Codecs are identified by the +associated value of the TIFF +Compression tag; e.g. 5 for LZW +compression.

    + +

    The TIFFRegisterCODEC routine can be used to +augment or override the set of codecs available to an +application. If the specified scheme already has a +registered codec then it is overridden and any images +with data encoded with this compression scheme will be +decoded using the supplied coded.

    + +

    TIFFIsCODECConfigured returns 1 if the codec is +configured and working. Otherwise 0 will be returned.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    No space to register compression scheme %s. +TIFFRegisterCODEC was unable to allocate memory for +the data structures needed to register a codec.

    + +

    Cannot remove compression scheme %s; not +registered. TIFFUnRegisterCODEC did not locate +the specified codec in the table of registered compression +schemes.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFcolor.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFcolor.3tiff.html new file mode 100644 index 000000000..edf423b6c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFcolor.3tiff.html @@ -0,0 +1,975 @@ + + + + + + +COLOR + + + +

    COLOR

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFYCbCrToRGBInit, TIFFYCbCrtoRGB, TIFFCIELabToRGBInit, +TIFFCIELabToXYZ, TIFFXYZToRGB − color conversion +routines.

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    int TIFFYCbCrToRGBInit(TIFFYCbCrToRGB +*ycbcr, float *luma, float +*refBlackWhite");"
    +void TIFFYCbCrtoRGB(TIFFYCbCrToRGB *    ycbcr, +uint32 Y, int32 Cb, int32 +Cr, uint32 *R, uint32 +*G, uint32 *B );

    + +

    int TIFFCIELabToRGBInit(TIFFCIELabToRGB +*cielab, TIFFDisplay *display, +float *refWhite);
    +void TIFFCIELabToXYZ(TIFFCIELabToRGB *    cielab, +uint32 L, int32 a, int32 +b, float *X, float *Y, +float *Z);
    +void TIFFXYZToRGB(TIFFCIELabToRGB *    cielab, +float X, float Y, float +Z",uint32*"R, +uint32 *G, uint32 *B);

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFF supports several color spaces for images stored in +that format. There is usually a problem of application to +handle the data properly and convert between different +colorspaces for displaying and printing purposes. To +simplify this task libtiff implements several color +conversion routines itself. In particular, these routines +used in TIFFRGBAImage(3TIFF) interface.

    + +

    TIFFYCbCrToRGBInit() used to initialize +YCbCr to RGB conversion state. Allocating and +freeing of the ycbcr structure belongs to programmer. +TIFFYCbCrToRGB defined in tiffio.h as

    +
    + + + + + +
    +
    typedef struct {                /* YCbCr->RGB support */
+        TIFFRGBValue* clamptab; /* range clamping table */
+
    +
    + + + + + +

    int*

    + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    Cr_r_tab;
    +int*

    +    		 +
    + +

    Cb_b_tab;
    +int32*

    +    		 +
    + +

    Cr_g_tab;
    +int32*

    +    		 +
    + +

    Cb_g_tab;

    +    		 +
    + + + + + +
    +

    int32* Y_tab;
    +} TIFFYCbCrToRGB;

    + + + + + +
    +

    luma is a float array of three values representing +proportions of the red, green and blue in luminance, Y (see +section 21 of the TIFF 6.0 specification, where the YCbCr +images discussed). TIFFTAG_YCBCRCOEFFICIENTS holds +that values in TIFF file. refBlackWhite is a float +array of 6 values which specifies a pair of headroom and +footroom image data values (codes) for each image component +(see section 20 of the TIFF 6.0 specification where the +colorinmetry fields discussed). +TIFFTAG_REFERENCEBLACKWHITE is responsible for +storing these values in TIFF file. Following code snippet +should helps to understand the the technique:

    +
    + + + + + +
    +
    float *luma, *refBlackWhite;
+uint16 hs, vs;
+
+/* Initialize structures */
+ycbcr = (TIFFYCbCrToRGB*)
+
    +
    + + + + + + + + + + + + + + + +
    + +

    _TIFFmalloc(TIFFroundup(sizeof(TIFFYCbCrToRGB), +sizeof(long))

    +
    + +

    + 4*256*sizeof(TIFFRGBValue)

    +
    + +

    + 2*256*sizeof(int)

    +
    + +

    + 3*256*sizeof(int32));

    +
    + + + + + +
    +

    if (ycbcr == NULL) {
    +TIFFError("YCbCr->RGB",

    + + + + + + + +
    + + +

    "No space for YCbCr->RGB conversion +state");

    +    		 +
    + + + + + +
    +

    exit(0);
    +}

    + +

    TIFFGetFieldDefaulted(tif, TIFFTAG_YCBCRCOEFFICIENTS, +&luma);
    +TIFFGetFieldDefaulted(tif, TIFFTAG_REFERENCEBLACKWHITE, +&refBlackWhite);
    +if (TIFFYCbCrToRGBInit(ycbcr, luma, refBlackWhite) < +0)

    + + + + + +
    + +

    exit(0);

    +
    + + + + + +
    +

    /* Start conversion */
    +uint32 r, g, b;
    +uint32 Y;
    +int32 Cb, Cr;

    + +

    for each pixel in image

    + + + + + +
    + +

    TIFFYCbCrtoRGB(img->ycbcr, Y, Cb, Cr, &r, &g, +&b);

    +
    + + + + + +
    +

    /* Free state structure */
    +_TIFFfree(ycbcr);

    + + + + + +
    +

    TIFFCIELabToRGBInit() initializes the CIE +L*a*b* 1976 to RGB conversion state. +TIFFCIELabToRGB defined as

    +
    + + + + + +
    +
    #define CIELABTORGB_TABLE_RANGE 1500
+
+
    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    typedef struct {

    +    		 + + +

    /* CIE Lab 1976->RGB support */

    +    		 +
    + + +

    int

    +    		 + +

    range;

    +    		 + + +

    /* Size of conversion table */

    +    		 +
    + + +

    float

    +    		 + +

    rstep, gstep, bstep;

    +    		 +
    + + +

    float

    +    		 + +

    X0, Y0, Z0;

    +    		 + +

    /* Reference white point */

    +    		 +
    + +

    TIFFDisplay display;

    +    		 +
    + + +

    float

    +    		 + +

    Yr2r[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yr +to r */

    +    		 +
    + + +

    float

    +    		 + +

    Yg2g[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yg +to g */

    +    		 +
    + + +

    float

    +    		 + +

    Yb2b[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yb +to b */

    +    		 +
    + + + + + +
    +

    } TIFFCIELabToRGB;

    + + + + + +
    +

    display is a display device description, declared +as

    +
    + + + + + +
    +
    typedef struct {
+
    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    float d_mat[3][3]; /* XYZ -> luminance matrix */

    +
    + +

    float d_YCR; /* Light o/p for reference white */

    +
    + +

    float d_YCG;

    +
    + +

    float d_YCB;

    +
    + +

    uint32 d_Vrwr; /* Pixel values for ref. white */

    +
    + +

    uint32 d_Vrwg;

    +
    + +

    uint32 d_Vrwb;

    +
    + +

    float d_Y0R; /* Residual light for black pixel */

    +
    + +

    float d_Y0G;

    +
    + +

    float d_Y0B;

    +
    + +

    float d_gammaR; /* Gamma values for the three guns +*/

    +
    + +

    float d_gammaG;

    +
    + +

    float d_gammaB;

    +
    + + + + + +
    +

    } TIFFDisplay;

    + + + + + +
    +

    For example, the one can use sRGB device, which has the +following parameters:

    +
    + + + + + +
    +
    TIFFDisplay display_sRGB = {
+
    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    { /* XYZ -> luminance matrix */

    +    		 +
    + + +

    { 3.2410F, -1.5374F, -0.4986F },

    +    		 +
    + + +

    { -0.9692F, 1.8760F, 0.0416F },

    +    		 +
    + + +

    { 0.0556F, -0.2040F, 1.0570F }

    +    		 +
    + +

    },

    +    		 + +
    + +

    100.0F, 100.0F, 100.0F, /* Light o/p for reference white +*/

    +    		 +
    + +

    255, 255, 255, /* Pixel values for ref. white */

    +    		 +
    + +

    1.0F, 1.0F, 1.0F, /* Residual light o/p for black pixel +*/

    +    		 +
    + +

    2.4F, 2.4F, 2.4F, /* Gamma values for the three guns +*/

    +    		 +
    + + + + + +
    +

    };

    + + + + + +
    +

    refWhite is a color temperature of the reference +white. The TIFFTAG_WHITEPOINT contains the +chromaticity of the white point of the image from where the +reference white can be calculated using following +formulae:

    +
    + + + + + +
    +

    refWhite_Y = 100.0
    +refWhite_X = whitePoint_x / whitePoint_y * refWhite_Y
    +refWhite_Z = (1.0 - whitePoint_x - whitePoint_y) / +whitePoint_y * refWhite_X

    + + + + + +
    +

    The conversion itself performed in two steps: at the +first one we will convert CIE L*a*b* 1976 to CIE +XYZ using TIFFCIELabToXYZ() routine, and at the +second step we will convert CIE XYZ to RGB +using TIFFXYZToRGB(). Look at the code sample +below:

    +
    + + + + + +
    +
    float   *whitePoint;
+float   refWhite[3];
+
+/* Initialize structures */
+img->cielab = (TIFFCIELabToRGB *)
+
    +
    + + + + + + +
    + +

    _TIFFmalloc(sizeof(TIFFCIELabToRGB));

    +
    + + + + + +
    +

    if (!cielab) {

    + + + + + + + + + + + + + + + + + + + + +
    + +

    TIFFError("CIE L*a*b*->RGB",

    +    		 +
    + + +

    "No space for CIE L*a*b*->RGB conversion +state.");

    +    		 +
    + +

    exit(0);

    +    		 +
    + + + + + +
    +

    }

    + +

    TIFFGetFieldDefaulted(tif, TIFFTAG_WHITEPOINT, +&whitePoint);
    +refWhite[1] = 100.0F;
    +refWhite[0] = whitePoint[0] / whitePoint[1] * +refWhite[1];
    +refWhite[2] = (1.0F - whitePoint[0] - +whitePoint[1])

    + + + + + +
    + +

    / whitePoint[1] * refWhite[1];

    +
    + + + + + +
    +

    if (TIFFCIELabToRGBInit(cielab, &display_sRGB, +refWhite) < 0) {

    + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    TIFFError("CIE L*a*b*->RGB",

    +    		 +
    + + +

    "Failed to initialize CIE L*a*b*->RGB conversion +state.");

    +    		 +
    + +

    _TIFFfree(cielab);

    +    		 +
    + +

    exit(0);

    +    		 +
    + + + + + +
    +

    }

    + +

    /* Now we can start to convert */
    +uint32 r, g, b;
    +uint32 L;
    +int32 a, b;
    +float X, Y, Z;

    + +

    for each pixel in image

    + + + + + + + + +
    + +

    TIFFCIELabToXYZ(cielab, L, a, b, &X, &Y, +&Z);

    +
    + +

    TIFFXYZToRGB(cielab, X, Y, Z, &r, &g, +&b);

    +
    + + + + + +
    +

    /* Don’t forget to free the state structure */
    +_TIFFfree(cielab);

    + +

    SEE ALSO

    + + + + + +
    +

    TIFFRGBAImage(3TIFF) libtiff(3TIFF),

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFmemory.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFmemory.3tiff.html new file mode 100644 index 000000000..c3f38e0b7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFmemory.3tiff.html @@ -0,0 +1,110 @@ + + + + + + +MEMORY + + + +

    MEMORY

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    _TIFFmalloc, _TIFFrealloc, _TIFFfree, _TIFFmemset, +_TIFFmemcpy, _TIFFmemcmp, − memory management-related +functions for use with TIFF files

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    tdata_t _TIFFmalloc(tsize_t size);
    +tdata_t _TIFFrealloc(tdata_t     buffer, +tsize_t size);
    +void _TIFFfree(tdata_t     buffer);
    +void _TIFFmemset(tdata_t     s, int +c, tsize_t n);
    +void _TIFFmemcpy(tdata_t     dest, const +tdata_t src, tsize_t n);
    +int _TIFFmemcmp(const tdata_t     s1, const +tdata_t s2, tsize_t n);

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    These routines are provided for writing portable software +that uses libtiff; they hide any memory-management +related issues, such as dealing with segmented architectures +found on 16-bit machines.

    + +

    _TIFFmalloc and _TIFFrealloc are used to +dynamically allocate and reallocate memory used by +libtiff; such as memory passed into the I/O routines. +Memory allocated through these interfaces is released back +to the system using the _TIFFfree routine.

    + +

    Memory allocated through one of the above interfaces can +be set to a known value using _TIFFmemset, copied to +another memory location using _TIFFmemcpy, or +compared for equality using _TIFFmemcmp. These +routines conform to the equivalent ANSI C +routines: memset, memcpy, and memcmp, +repsectively.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    None.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    malloc(3), memory(3), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFquery.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFquery.3tiff.html new file mode 100644 index 000000000..2b47fc3de --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFquery.3tiff.html @@ -0,0 +1,148 @@ + + + + + + +QUERY + + + +

    QUERY

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFCurrentRow, TIFFCurrentStrip, TIFFCurrentTile, +TIFFCurrentDirectory, TIFFLastDirectory, TIFFFileno, +TIFFFileName, TIFFGetMode, TIFFIsTiled, TIFFIsByteSwapped, +TIFFIsUpSampled, TIFFIsMSB2LSB, TIFFGetVersion − query +routines

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    uint32 TIFFCurrentRow(TIFF* tif)
    +tstrip_t TIFFCurrentStrip(TIFF*     tif)
    +ttile_t TIFFCurrentTile(TIFF*     tif)
    +tdir_t TIFFCurrentDirectory(TIFF*     tif)
    +int TIFFLastDirectory(TIFF*     tif)
    +int TIFFFileno(TIFF*     tif)
    +char* TIFFFileName(TIFF*     tif)
    +int TIFFGetMode(TIFF*     tif)
    +int TIFFIsTiled(TIFF*     tif)
    +int TIFFIsByteSwapped(TIFF*     tif)
    +int TIFFIsUpSampled(TIFF*     tif)
    +int TIFFIsMSB2LSB(TIFF*     tif)
    +const char* TIFFGetVersion(void)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    The following routines return status information about an +open TIFF file.

    + +

    TIFFCurrentDirectory returns the index of the +current directory (directories are numbered starting at 0). +This number is suitable for use with the +TIFFSetDirectory routine.

    + +

    TIFFLastDirectory returns a non-zero value if the +current directory is the last directory in the file; +otherwise zero is returned.

    + +

    TIFFCurrentRow, TIFFCurrentStrip, and +TIFFCurrentTile, return the current row, strip, and +tile, respectively, that is being read or written. These +values are updated each time a read or write is done.

    + +

    TIFFFileno returns the underlying file descriptor +used to access the TIFF image in the +filesystem.

    + +

    TIFFFileName returns the pathname argument passed +to TIFFOpen or TIFFFdOpen.

    + +

    TIFFGetMode returns the mode with which the +underlying file was opened. On UNIX systems, +this is the value passed to the open(2) system +call.

    + +

    TIFFIsTiled returns a non-zero value if the image +data has a tiled organization. Zero is returned if the image +data is organized in strips.

    + +

    TIFFIsByteSwapped returns a non-zero value if the +image data was in a different byte-order than the host +machine. Zero is returned if the TIFF file and local host +byte-orders are the same. Note that TIFFReadTile(), +TIFFReadStrip() and TIFFReadScanline() functions already +normally perform byte swapping to local host order if +needed.

    + +

    TIFFIsUpSampled returns a non-zero value if image +data returned through the read interface routines is being +up-sampled. This can be useful to applications that want to +calculate I/O buffer sizes to reflect this usage (though the +usual strip and tile size routines already do this).

    + +

    TIFFIsMSB2LSB returns a non-zero value if the +image data is being returned with bit 0 as the most +significant bit.

    + +

    TIFFGetVersion returns an ASCII +string that has a version stamp for the TIFF +library software.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    None.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    libtiff(3TIFF), TIFFOpen(3TIFF), +TIFFFdOpen(3TIFF)

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFsize.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFsize.3tiff.html new file mode 100644 index 000000000..5a14254ed --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFsize.3tiff.html @@ -0,0 +1,95 @@ + + + + + + +TIFFSIZE + + + +

    TIFFSIZE

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFScanlineSize, TIFFRasterScanlineSize, − return +the size of various items associated with an open +TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    tsize_t TIFFRasterScanlineSize(TIFF +*tif)
    +tsize_t TIFFScanlineSize(TIFF *    tif)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFScanlineSize returns the size in bytes of a +row of data as it would be returned in a call to +TIFFReadScanline, or as it would be expected in a +call to TIFFWriteScanline.

    + +

    TIFFRasterScanlineSize returns the size in bytes +of a complete decoded and packed raster scanline. Note that +this value may be different from the value returned by +TIFFScanlineSize if data is stored as separate +planes.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    None.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFOpen(3TIFF), TIFFReadScanline(3TIFF), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFstrip.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFstrip.3tiff.html new file mode 100644 index 000000000..b8bc7c62d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFstrip.3tiff.html @@ -0,0 +1,129 @@ + + + + + + +TIFFSTRIP + + + +

    TIFFSTRIP

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFDefaultStripSize, TIFFStripSize, TIFFVStripSize, +TIFFRawStripSize, TIFFComputeStrip, TIFFNumberOfStrips +− strip-related utility routines

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    uint32 TIFFDefaultStripSize(TIFF *tif, +uint32 estimate)
    +tsize_t TIFFStripSize(TIFF *    tif)
    +tsize_t TIFFVStripSize(TIFF *    tif, uint32 +nrows)
    +tsize_t TIFFRawStripSize(TIFF *    tif, +tstrip_t strip)
    +tstrip_t TIFFComputeStrip(TIFF *    tif, +uint32 row, tsample_t +sample)
    +tstrip_t TIFFNumberOfStrips(TIFF *    tif)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFDefaultStripSize returns the number of rows +for a reasonable-sized strip according to the current +settings of the ImageWidth, BitsPerSample, +SamplesPerPixel, tags and any compression-specific +requirements. If the estimate parameter, if non-zero, +then it is taken as an estimate of the desired strip size +and adjusted according to any compression-specific +requirements. The value returned by this function is +typically used to define the RowsPerStrip tag. In +lieu of any unusual requirements TIFFDefaultStripSize +tries to create strips that have approximately 8 kilobytes +of uncompressed data.

    + +

    TIFFStripSize returns the equivalent size for a +strip of data as it would be returned in a call to +TIFFReadEncodedStrip or as it would be expected in a +call to TIFFWriteEncodedStrip.

    + +

    TIFFVStripSize returns the number of bytes in a +strip with nrows rows of data.

    + +

    TIFFRawStripSize returns the number of bytes in a +raw strip (i.e. not decoded).

    + +

    TIFFComputeStrip returns the strip that contains +the specified coordinates. A valid strip is always returned; +out-of-range coordinate values are clamped to the bounds of +the image. The row parameter is always used in +calculating a strip. The sample parameter is used +only if data are organized in separate planes +(PlanarConfiguration=2).

    + +

    TIFFNumberOfStrips returns the number of strips in +the image.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    None.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFReadEncodedStrip(3TIFF), +TIFFReadRawStrip(3TIFF), +TIFFWriteEncodedStrip(3TIFF), +TIFFWriteRawStrip(3TIFF), libtiff(3TIFF),

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFswab.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFswab.3tiff.html new file mode 100644 index 000000000..80d1db458 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFswab.3tiff.html @@ -0,0 +1,110 @@ + + + + + + +SWAB + + + +

    SWAB

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFGetBitRevTable, TIFFReverseBits, TIFFSwabShort, +TIFFSwabLong, TIFFSwabArrayOfShort, TIFFSwabArrayOfLong +− byte- and bit-swapping routines

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    const unsigned char* TIFFGetBitRevTable(int +reversed)
    +void TIFFReverseBits(u_char *    data, unsigned +long nbytes)
    +void TIFFSwabShort(uint16 *    data)
    +void TIFFSwabLong(uint32 *    data)
    +void TIFFSwabArrayOfShort(uint16 *    data, +unsigned long nshorts)
    +void TIFFSwabArrayOfLong(uint32 *    data, +unsigned long nlongs)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    The following routines are used by the library to swap +16- and 32-bit data and to reverse the order of bits in +bytes.

    + +

    TIFFSwabShort and TIFFSwabLong swap the +bytes in a single 16-bit and 32-bit item, respectively. +TIFFSwabArrayOfShort and TIFFSwabArrayOfLong +swap the bytes in an array of 16-bit and 32-bit items, +respectively.

    + +

    TIFFReverseBits replaces each byte in data +with the equivalent bit-reversed value. This operation is +performed with a lookup table, which is returned using the +TIFFGetBitRevTable function. reversed +parameter specifies which table should be returned. Supply +1 if you want bit reversal table. Supply 0 to +get the table that do not reverse bit values. It is a lookup +table that can be used as an identity function; i.e. +TIFFNoBitRevTable[n] == n.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    None.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/TIFFtile.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/TIFFtile.3tiff.html new file mode 100644 index 000000000..addeb5159 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/TIFFtile.3tiff.html @@ -0,0 +1,141 @@ + + + + + + +TIFFTILE + + + +

    TIFFTILE

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +DIAGNOSTICS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    TIFFTileSize, TIFFTileRowSize, TIFFVTileSize, +TIFFDefaultTileSize, TIFFComputeTile, TIFFCheckTile, +TIFFNumberOfTiles − tile-related utility routines

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    void TIFFDefaultTileSize(TIFF *tif, +uint32 *tw, uint32 *th)
    +tsize_t TIFFTileSize(TIFF *    tif)
    +tsize_t TIFFTileRowSize(TIFF *    tif)
    +tsize_t TIFFVTileSize(TIFF *    tif, uint32 +nrows)
    +ttile_t TIFFComputeTile(TIFF *    tif, uint32 +x, uint32 y, uint32 z, +tsample_t sample)
    +int TIFFCheckTile(TIFF *    tif, uint32 +x, uint32 y, uint32 z, +tsample_t sample)
    +ttile_t TIFFNumberOfTiles(TIFF *    tif)

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    TIFFDefaultTileSize returns the pixel width and +height of a reasonable-sized tile; suitable for setting up +the TileWidth and TileLength tags. If the +tw and th values passed in are non-zero, then +they are adjusted to reflect any compression-specific +requirements. The returned width and height are constrained +to be a multiple of 16 pixels to conform with the +TIFF specification.

    + +

    TIFFTileSize returns the equivalent size for a +tile of data as it would be returned in a call to +TIFFReadTile or as it would be expected in a call to +TIFFWriteTile.

    + +

    TIFFVTileSize returns the number of bytes in a +row-aligned tile with nrows of data.

    + +

    TIFFTileRowSize returns the number of bytes of a +row of data in a tile.

    + +

    TIFFComputeTile returns the tile that contains the +specified coordinates. A valid tile is always returned; +out-of-range coordinate values are clamped to the bounds of +the image. The x and y parameters are always +used in calculating a tile. The z parameter is used +if the image is deeper than 1 slice +(ImageDepth>1). The sample parameter is +used only if data are organized in separate planes +(PlanarConfiguration=2).

    + +

    TIFFCheckTile returns a non-zero value if the +supplied coordinates are within the bounds of the image and +zero otherwise. The x parameter is checked against +the value of the ImageWidth tag. The y +parameter is checked against the value of the +ImageLength tag. The z parameter is checked +against the value of the ImageDepth tag (if defined). +The sample parameter is checked against the value of +the SamplesPerPixel parameter if the data are +organized in separate planes.

    + +

    TIFFNumberOfTiles returns the number of tiles in +the image.

    +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    None.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    TIFFReadEncodedTile(3TIFF), +TIFFReadRawTile(3TIFF), TIFFReadTile(3TIFF), +TIFFWriteEncodedTile(3TIFF), +TIFFWriteRawTile(3TIFF), TIFFWriteTile(3TIFF), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/bmp2tiff.1.html b/src/SDL2/external/tiff-4.0.3/html/man/bmp2tiff.1.html new file mode 100644 index 000000000..1104a49f0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/bmp2tiff.1.html @@ -0,0 +1,121 @@ + + + + + + +BMP2TIFF + + + +

    BMP2TIFF

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    bmp2tiff − create a TIFF file from a +Microsoft Windows Device Independent Bitmap image file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    bmp2tiff [ options ] input.bmp +output.tiff

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    bmp2tiff converts a Microsoft Windows Device +Independent Bitmap image file to TIFF. By +default, the TIFF image is created with data +samples packed (PlanarConfiguration=1), compressed +with the PackBits algorithm +(Compression=32773), and with each strip no +more than 8 kilobytes. These characteristics can overridden, +or explicitly specified with the options described +below.

    +
    + +

    OPTIONS

    + + + + + + + + +
    + +

    −c

    +    		 + +

    Specify a compression scheme to use when writing image +data: −c none for no compression, -c +packbits for the PackBits compression algorithm (the +default), -c jpeg for the baseline JPEG compression +algorithm, -c zip for the Deflate compression +algorithm, and −c lzw for Lempel-Ziv & +Welch.

    +    		 +
    + + + + + +
    +

    −r <number>

    + + + + + +
    +

    Write data with a specified number of rows per strip; by +default the number of rows/strip is selected so that each +strip is approximately 8 kilobytes.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    gif2tiff(1), pal2rgb(1), +ppm2tiff(1), raw2tiff(1), ras2tiff(1), +sgi2tiff(1), libtiff(3TIFF)

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/fax2ps.1.html b/src/SDL2/external/tiff-4.0.3/html/man/fax2ps.1.html new file mode 100644 index 000000000..aba6fc307 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/fax2ps.1.html @@ -0,0 +1,252 @@ + + + + + + +FAX2PS + + + +

    FAX2PS

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +DIAGNOSTICS
    +NOTES
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    fax2ps − convert a TIFF facsimile to +compressed PostScript™

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    fax2ps [ options ] [ file ... ]

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    fax2ps reads one or more TIFF +facsimile image files and prints a compressed form of +PostScript on the standard output that is suitable for +printing.

    + +

    By default, each page is scaled to reflect the image +dimensions and resolutions stored in the file. The +−x and −y options can be used to +specify the horizontal and vertical image resolutions +(lines/inch), respectively. If the −S option is +specified, each page is scaled to fill an output page. The +default output page is 8.5 by 11 inches. Alternate page +dimensions can be specified in inches with the +−W and −H options.

    + +

    By default fax2ps generates PostScript for all +pages in the file. The −p option can be used to +select one or more pages from a multi-page document.

    + +

    fax2ps generates a compressed form of PostScript +that is optimized for sending pages of text to a PostScript +printer attached to a host through a low-speed link (such as +a serial line). Each output page is filled with white and +then only the black areas are drawn. The PostScript +specification of the black drawing operations is optimized +by using a special font that encodes the move-draw +operations required to fill the black regions on the page. +This compression scheme typically results in a substantially +reduced PostScript description, relative to the +straightforward imaging of the page with a PostScript +image operator. This algorithm can, however, be +ineffective for continuous-tone and white-on-black images. +For these images, it sometimes is more efficient to send the +raster bitmap image directly; see tiff2ps(1).

    +
    + +

    OPTIONS

    + + + + + + + +
    + +

    −p number

    +    		 + +

    Print only the indicated page. Multiple pages may be +printed by specifying this option more than once.

    +    		 +
    + + + + + +
    +

    −x resolution

    + + + + + +
    +

    Use resolution as the horizontal resolution, in +dots/inch, of the image data. By default this value is taken +from the file.

    +
    + + + + + +
    +

    −y resolution

    + + + + + +
    +

    Use resolution as the vertical resolution, in +lines/inch, of the image data. By default this value is +taken from the file.

    +
    + + + + + + + + + + + + + + + + + +
    + +

    −S

    +    		 + +

    Scale each page of image data to fill the output page +dimensions. By default images are presented according to the +dimension information recorded in the TIFF +file.

    +    		 +
    + +

    −W width

    +    		 + +

    Use width as the width, in inches, of the output +page.

    +    		 +
    + +

    −H height

    +    		 + +

    Use height as the height, in inches, of the +output page.

    +    		 +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    Some messages about malformed TIFF images +come from the TIFF library.

    + +

    Various messages about badly formatted facsimile images +may be generated due to transmission errors in received +facsimile. fax2ps attempts to recover from such data +errors by resynchronizing decoding at the end of the current +scanline. This can result in long horizontal black lines in +the resultant PostScript image.

    +
    + +

    NOTES

    + + + + + +
    +

    If the destination printer supports PostScript Level II +then it is always faster to just send the encoded bitmap +generated by the tiff2ps(1) program.

    +
    + +

    BUGS

    + + + + + +
    +

    fax2ps should probably figure out when it is doing +a poor job of compressing the output and just generate +PostScript to image the bitmap raster instead.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    tiff2ps(1), libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/fax2tiff.1.html b/src/SDL2/external/tiff-4.0.3/html/man/fax2tiff.1.html new file mode 100644 index 000000000..3aac8c793 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/fax2tiff.1.html @@ -0,0 +1,607 @@ + + + + + + +FAX2TIFF + + + +

    FAX2TIFF

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +DIAGNOSTICS
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    fax2tiff − create a TIFF Class F fax +file from raw fax data

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    fax2tiff [ options ] [ −o +output.tif ] input.raw

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Fax2tiff creates a TIFF file +containing CCITT Group 3 or Group 4 encoded +data from one or more files containing +‘‘raw’’ Group 3 or Group 4 encoded +data (typically obtained directly from a fax modem). By +default, each row of data in the resultant +TIFF file is 1-dimensionally encoded and +padded or truncated to 1728 pixels, as needed. The resultant +image is a set of low resolution (98 lines/inch) or medium +resolution (196 lines/inch) pages, each of which is a single +strip of data. The generated file conforms to the +TIFF Class F ( FAX ) +specification for storing facsimile data. This means, in +particular, that each page of the data does not +include the trailing return to control ( +RTC ) code; as required for transmission by +the CCITT Group 3 specifications. The old, +‘‘classic’’, format is created if +the −c option is used. (The Class F format can +also be requested with the −f option.)

    + +

    The default name of the output image is fax.tif; +this can be changed with the −o option. Each +input file is assumed to be a separate page of facsimile +data from the same document. The order in which input files +are specified on the command line is the order in which the +resultant pages appear in the output file.

    +
    + +

    OPTIONS

    + + + + + +
    +

    Options that affect the interpretation of input data +are:

    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −3

    +    		 + +

    Assume input data is CCITT Group 3 +encoded (default).

    +    		 +
    + +

    −4

    +    		 + +

    Assume input data is CCITT Group 4 +encoded.

    +    		 +
    + +

    −U

    +    		 + +

    Assume input data is uncompressed (Group 3 or Group +4).

    +    		 +
    + +

    −1

    +    		 + +

    Assume input data is encoded with the 1-dimensional +version of the CCITT Group 3 Huffman encoding +algorithm (default).

    +    		 +
    + +

    −2

    +    		 + +

    Assume input data is 2-dimensional version of the +CCITT Group 3 Huffman encoding algorithm.

    +    		 +
    + +

    −P

    +    		 + +

    Assume input data is not EOL-aligned (default). +This option has effect with Group 3 encoded input only.

    +    		 +
    + +

    −A

    +    		 + +

    Assume input data is EOL-aligned. This option has effect +with Group 3 encoded input only.

    +    		 +
    + +

    −M

    +    		 + +

    Treat input data as having bits filled from most +significant bit ( MSB ) to most least bit ( +LSB ).

    +    		 +
    + +

    −L

    +    		 + +

    Treat input data as having bits filled from least +significant bit ( LSB ) to most significant +bit ( MSB ) (default).

    +    		 +
    + +

    −B

    +    		 + +

    Assume input data was encoded with black as 0 and white +as 1.

    +    		 +
    + +

    −W

    +    		 + +

    Assume input data was encoded with black as 1 and white +as 0 (default).

    +    		 +
    + +

    −R

    +    		 + +

    Specify the vertical resolution, in lines/inch, of the +input images. By default input are assumed to have a +vertical resolution of 196 lines/inch. If images are low +resolution facsimile, a value of 98 lines/inch should be +specified.

    +    		 +
    + +

    −X

    +    		 + +

    Specify the width, in pixels, of the input images. By +default input are assumed to have a width of 1728 +pixels.

    +    		 +
    + + + + + +
    +

    Options that affect the output file format are:

    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −o

    +    		 + +

    Specify the name of the output file.

    +    		 +
    + +

    −7

    +    		 + +

    Force output to be compressed with the +CCITT Group 3 Huffman encoding algorithm +(default).

    +    		 +
    + +

    −8

    +    		 + +

    Force output to be compressed with the +CCITT Group 4 Huffman encoding.

    +    		 +
    + +

    −u

    +    		 + +

    Force output to be uncompressed (Group 3 or Group +4).

    +    		 +
    + +

    −5

    +    		 + +

    Force output to be encoded with the 1-dimensional +version of the CCITT Group 3 Huffman encoding +algorithm.

    +    		 +
    + +

    −6

    +    		 + +

    Force output to be encoded with the 2-dimensional +version of the CCITT Group 3 Huffman encoding +algorithm (default).

    +    		 +
    + +

    −a

    +    		 + +

    Force the last bit of each End Of Line ( +EOL ) code to land on a byte boundary +(default). This ‘‘zero padding’’ +will be reflected in the contents of the +Group3Options tag of the resultant +TIFF file. This option has effect with Group +3 encoded output only.

    +    		 +
    + +

    −p

    +    		 + +

    Do not EOL-align output. This option has effect with +Group 3 encoded output only.

    +    		 +
    + +

    −c

    +    		 + +

    Generate "classic" Group 3 TIFF format.

    +    		 +
    + +

    −f

    +    		 + +

    Generate TIFF Class F (TIFF/F) format (default).

    +    		 +
    + +

    −m

    +    		 + +

    Force output data to have bits filled from most +significant bit ( MSB ) to most least bit ( +LSB ).

    +    		 +
    + +

    −l

    +    		 + +

    Force output data to have bits filled from least +significant bit ( LSB ) to most significant +bit ( MSB ) (default).

    +    		 +
    + +

    −r

    +    		 + +

    Specify the number of rows (scanlines) in each strip of +data written to the output file. By default (or when value +0 is specified), tiffcp attempts to set the +rows/strip that no more than 8 kilobytes of data appear in a +strip (with except of G3/G4 compression schemes). If you +specify special value −1 it will results in +infinite number of the rows per strip. The entire image will +be the one strip in that case. This is default in case of +G3/G4 output compression schemes.

    +    		 +
    + +

    −s

    +    		 + +

    Stretch the input image vertically by writing each input +row of data twice to the output file.

    +    		 +
    + +

    −v

    +    		 + +

    Force fax2tiff to print the number of rows of +data it retrieved from the input file.

    +    		 +
    + +

    −z

    +    		 + +

    Force output to be compressed with the LZW encoding.

    +    		 +
    + +

    DIAGNOSTICS

    + + + + + +
    +

    The following warnings and errors come from the decoding +routines in the library.

    + +

    Warning, %s: Premature EOL at scanline %d (x +%d).\n. The input data had a row that was shorter than +the expected width. The row is padded with white.

    + +

    %s: Premature EOF at scanline %d (x %d).\n. The +decoder ran out of data in the middle of a scanline. The +resultant row is padded with white.

    + +

    %s: Bad code word at row %d, x %d\n. An invalid +Group 3 code was encountered while decoding the input +file. The row number and horizontal position is given. The +remainder of the input row is discarded, while the +corresponding output row is padded with white.

    + +

    %s: Bad 2D code word at scanline %d.\n. An invalid +Group 4 or 2D Group 3 code was encountered while +decoding the input file. The row number and horizontal +position is given. The remainder of the input row is +discarded, while the corresponding output row is padded with +white.

    +
    + +

    BUGS

    + + + + + +
    +

    Input data are assumed to have a a ‘‘top +left’’ orientation; it should be possible to +override this assumption from the command line.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    CCITT Recommendation T.4 +(Standardization of Group 3 Facsimile Apparatus for Document +Transmission).

    + +

    The Spirit of TIFF Class F, an appendix to the +TIFF 5.0 specification prepared by Cygnet Technologies.

    + +

    tiffinfo(1), tiffdither(1), +tiffgt(1), libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/gif2tiff.1.html b/src/SDL2/external/tiff-4.0.3/html/man/gif2tiff.1.html new file mode 100644 index 000000000..c50735377 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/gif2tiff.1.html @@ -0,0 +1,141 @@ + + + + + + +GIF2TIFF + + + +

    GIF2TIFF

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +NOTES
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    gif2tiff − create a TIFF file from a +GIF87 format image file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    gif2tiff [ options ] input.gif +output.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Gif2tiff converts a file in the GIF87 format to +TIFF. The TIFF image is +created as a palette image, with samples compressed with the +Lempel-Ziv & Welch algorithm (Compression=5). +These characteristics can overridden, or explicitly +specified with the options described below.

    +
    + +

    OPTIONS

    + + + + + + + + + + + + + + +
    + +

    −c

    +    		 + +

    Specify a compression scheme to use when writing image +data: −c none for no compression, −c +packbits for the PackBits compression algorithm, +−c zip for the Deflate compression algorithm, +and −c lzw for Lempel-Ziv & Welch (the +default).

    +    		 +
    + +

    −r

    +    		 + +

    Write data with a specified number of rows per strip; by +default the number of rows/strip is selected so that each +strip is approximately 8 kilobytes.

    +    		 +
    + +

    NOTES

    + + + + + +
    +

    The program is based on Paul Haeberli’s +fromgif program which, in turn, is based on Marcel +J.E. Mol’s GIF reader.

    +
    + +

    BUGS

    + + + + + +
    +

    Should have more options to control output format.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    pal2rgb(1), tiffinfo(1), tiffcp(1), +tiffmedian(1), libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/index.html b/src/SDL2/external/tiff-4.0.3/html/man/index.html new file mode 100644 index 000000000..7e9e8d2c7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/index.html @@ -0,0 +1,64 @@ +Libtiff HTML manpage index diff --git a/src/SDL2/external/tiff-4.0.3/html/man/libtiff.3tiff.html b/src/SDL2/external/tiff-4.0.3/html/man/libtiff.3tiff.html new file mode 100644 index 000000000..931ae94b4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/libtiff.3tiff.html @@ -0,0 +1,1150 @@ + + + + + + +INTRO + + + +

    INTRO

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +DATA TYPES
    +LIST OF ROUTINES
    +TAG USAGE
    +PSEUDO TAGS
    +DIAGNOSTICS
    +SEE ALSO
    +BUGS
    + +
    + +

    NAME

    + + + + + +
    +

    libtiff − introduction to libtiff, a +library for reading and writing TIFF +files

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    #include <tiffio.h>

    + +

    cc file.c -ltiff

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    libtiff is a library for reading and writing +data files encoded with the Tag Image File format, +Revision 6.0 (or revision 5.0 or revision 4.0). This file +format is suitable for archiving multi-color and +monochromatic image data.

    + +

    The library supports several compression algorithms, +as indicated by the Compression field, including: no +compression (1), CCITT 1D Huffman compression +(2), CCITT Group 3 Facsimile compression +(3), CCITT Group 4 Facsimile compression (4), +Lempel-Ziv & Welch compression (5), baseline JPEG +compression (7), word-aligned 1D Huffman compression +(32771), and PackBits compression (32773). In addition, +several nonstandard compression algorithms are supported: +the 4-bit compression algorithm used by the +ThunderScan program (32809) (decompression only), +NeXT’s 2-bit compression algorithm (32766) +(decompression only), an experimental LZ-style algorithm +known as Deflate (32946), and an experimental CIE LogLuv +compression scheme designed for images with high dynamic +range (32845 for LogL and 32845 for LogLuv). Directory +information may be in either little- or big-endian byte +order−byte swapping is automatically done by the +library. Data bit ordering may be either Most Significant +Bit ( MSB ) to Least Significant Bit ( LSB +) or LSB to MSB. Finally, the +library does not support files in which the +BitsPerSample, Compression, +MinSampleValue, or MaxSampleValue fields are +defined differently on a per-sample basis (in Rev. 6.0 the +Compression tag is not defined on a per-sample basis, +so this is immaterial).

    +
    + +

    DATA TYPES

    + + + + + +
    +

    The library makes extensive use of C typedefs to +promote portability. Two sets of typedefs are used, one for +communication with clients of the library and one for +internal data structures and parsing of the TIFF +format. The following typedefs are exposed to users +either through function definitions or through parameters +passed through the varargs interfaces.

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    typedef unsigned short uint16;

    +    		 + +

    16-bit unsigned integer

    +
    + +

    typedef unsigned <thing> +uint32;

    +    		 + +

    32-bit unsigned integer

    +
    + +

    typedef unsigned int ttag_t;

    +    		 + +

    directory tag

    +
    + +

    typedef uint16 tdir_t;

    +    		 + +

    directory index

    +
    + +

    typedef uint16 tsample_t;

    +    		 + +

    sample number

    +
    + +

    typedef uint32 tstrip_t;

    +    		 + +

    strip number

    +
    + +

    typedef uint32 ttile_t;

    +    		 + +

    tile number

    +
    + +

    typedef int32 tsize_t;

    +    		 + +

    i/o size in bytes

    +
    + +

    typedef void* tdata_t;

    +    		 + +

    image data ref

    +
    + +

    typedef void* thandle_t;

    +    		 + +

    client data handle

    +
    + +

    typedef int32 toff_t;

    +    		 + +

    file offset

    +
    + + + + + +
    +

    Note that tstrip_t, ttile_t, and +tsize_t are constrained to be no more than 32-bit +quantities by 32-bit fields they are stored in in the +TIFF image. Likewise tsample_t is limited by the +16-bit field used to store the SamplesPerPixel tag. +tdir_t constrains the maximum number of IFDs +that may appear in an image and may be an arbitrary +size (w/o penalty). ttag_t must be either int, +unsigned int, pointer, or double because the library uses a +varargs interface and ANSI C restricts the type +of the parameter before an ellipsis to be a promoted type. +toff_t is defined as int32 because TIFF file offsets +are (unsigned) 32-bit quantities. A signed value is used +because some interfaces return −1 on error. Finally, +note that user-specified data references are passed as +opaque handles and only cast at the lowest layers where +their type is presumed.

    +
    + +

    LIST OF ROUTINES

    + + + + + +
    +

    The following routines are part of the library. +Consult specific manual pages for details on their +operation; on most systems doing ‘‘man +function-name’’ will work.

    + + +

    Name Description

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    TIFFCheckpointDirectory

    +    		 + +

    writes the current state of the directory

    +
    + +

    TIFFCheckTile

    +    		 + +

    very x,y,z,sample is within image

    +
    + +

    TIFFCIELabToRGBInit

    +    		 + +

    initialize CIE L*a*b* 1976 to RGB conversion +state

    +
    + +

    TIFFCIELabToXYZ

    +    		 + +

    perform CIE L*a*b* 1976 to CIE XYZ +conversion

    +
    + +

    TIFFClientOpen

    +    		 + +

    open a file for reading or writing

    +
    + +

    TIFFClose

    +    		 + +

    close an open file

    +
    + +

    TIFFComputeStrip

    +    		 + +

    return strip containing y,sample

    +
    + +

    TIFFComputeTile

    +    		 + +

    return tile containing x,y,z,sample

    +
    + +

    TIFFCurrentDirectory

    +    		 + +

    return index of current directory

    +
    + +

    TIFFCurrentRow

    +    		 + +

    return index of current scanline

    +
    + +

    TIFFCurrentStrip

    +    		 + +

    return index of current strip

    +
    + +

    TIFFCurrentTile

    +    		 + +

    return index of current tile

    +
    + +

    TIFFDataWidth

    +    		 + +

    return the size of TIFF data types

    +
    + +

    TIFFError

    +    		 + +

    library error handler

    +
    + +

    TIFFFdOpen

    +    		 + +

    open a file for reading or writing

    +
    + +

    TIFFFileName

    +    		 + +

    return name of open file

    +
    + +

    TIFFFileno

    +    		 + +

    return open file descriptor

    +
    + +

    TIFFFindCODEC

    +    		 + +

    find standard codec for the specific +scheme

    +
    + +

    TIFFFlush

    +    		 + +

    flush all pending writes

    +
    + +

    TIFFFlushData

    +    		 + +

    flush pending data writes

    +
    + +

    TIFFGetBitRevTable

    +    		 + +

    return bit reversal table

    +
    + +

    TIFFGetField

    +    		 + +

    return tag value in current directory

    +
    + +

    TIFFGetFieldDefaulted

    +    		 + +

    return tag value in current directory

    +
    + +

    TIFFGetMode

    +    		 + +

    return open file mode

    +
    + +

    TIFFGetVersion

    +    		 + +

    return library version string

    +
    + +

    TIFFIsCODECConfigured

    +    		 + +

    check, whether we have working codec

    +
    + +

    TIFFIsMSB2LSB

    +    		 + +

    return true if image data is being +returned

    +
    + +

    with bit 0 as the most significant bit

    +
    + +

    TIFFIsTiled

    +    		 + +

    return true if image data is tiled

    +
    + +

    TIFFIsByteSwapped

    +    		 + +

    return true if image data is byte-swapped

    +
    + +

    TIFFNumberOfStrips

    +    		 + +

    return number of strips in an image

    +
    + +

    TIFFNumberOfTiles

    +    		 + +

    return number of tiles in an image

    +
    + +

    TIFFOpen

    +    		 + +

    open a file for reading or writing

    +
    + +

    TIFFPrintDirectory

    +    		 + +

    print description of the current +directory

    +
    + +

    TIFFReadBufferSetup

    +    		 + +

    specify i/o buffer for reading

    +
    + +

    TIFFReadDirectory

    +    		 + +

    read the next directory

    +
    + +

    TIFFReadEncodedStrip

    +    		 + +

    read and decode a strip of data

    +
    + +

    TIFFReadEncodedTile

    +    		 + +

    read and decode a tile of data

    +
    + +

    TIFFReadRawStrip

    +    		 + +

    read a raw strip of data

    +
    + +

    TIFFReadRawTile

    +    		 + +

    read a raw tile of data

    +
    + +

    TIFFReadRGBAImage

    +    		 + +

    read an image into a fixed format raster

    +
    + +

    TIFFReadScanline

    +    		 + +

    read and decode a row of data

    +
    + +

    TIFFReadTile

    +    		 + +

    read and decode a tile of data

    +
    + +

    TIFFRegisterCODEC

    +    		 + +

    override standard codec for the specific +scheme

    +
    + +

    TIFFReverseBits

    +    		 + +

    reverse bits in an array of bytes

    +
    + +

    TIFFRGBAImageBegin

    +    		 + +

    setup decoder state for TIFFRGBAImageGet

    +
    + +

    TIFFRGBAImageEnd

    +    		 + +

    release TIFFRGBAImage decoder state

    +
    + +

    TIFFRGBAImageGet

    +    		 + +

    read and decode an image

    +
    + +

    TIFFRGBAImageOK

    +    		 + +

    is image readable by TIFFRGBAImageGet

    +
    + +

    TIFFScanlineSize

    +    		 + +

    return size of a scanline

    +
    + +

    TIFFSetDirectory

    +    		 + +

    set the current directory

    +
    + +

    TIFFSetSubDirectory

    +    		 + +

    set the current directory

    +
    + +

    TIFFSetErrorHandler

    +    		 + +

    set error handler function

    +
    + +

    TIFFSetField

    +    		 + +

    set a tag’s value in the current +directory

    +
    + +

    TIFFSetWarningHandler

    +    		 + +

    set warning handler function

    +
    + +

    TIFFStripSize

    +    		 + +

    returns size of a strip

    +
    + +

    TIFFRawStripSize

    +    		 + +

    returns the number of bytes in a raw +strip

    +
    + +

    TIFFSwabShort

    +    		 + +

    swap bytes of short

    +
    + +

    TIFFSwabLong

    +    		 + +

    swap bytes of long

    +
    + +

    TIFFSwabArrayOfShort

    +    		 + +

    swap bytes of an array of shorts

    +
    + +

    TIFFSwabArrayOfLong

    +    		 + +

    swap bytes of an array of longs

    +
    + +

    TIFFTileRowSize

    +    		 + +

    return size of a row in a tile

    +
    + +

    TIFFTileSize

    +    		 + +

    return size of a tile

    +
    + +

    TIFFUnRegisterCODEC

    +    		 + +

    unregisters the codec

    +
    + +

    TIFFVGetField

    +    		 + +

    return tag value in current directory

    +
    + +

    TIFFVGetFieldDefaulted

    +    		 + +

    return tag value in current directory

    +
    + +

    TIFFVSetField

    +    		 + +

    set a tag’s value in the current +directory

    +
    + +

    TIFFVStripSize

    +    		 + +

    returns the number of bytes in a strip

    +
    + +

    TIFFWarning

    +    		 + +

    library warning handler

    +
    + +

    TIFFWriteDirectory

    +    		 + +

    write the current directory

    +
    + +

    TIFFWriteEncodedStrip

    +    		 + +

    compress and write a strip of data

    +
    + +

    TIFFWriteEncodedTile

    +    		 + +

    compress and write a tile of data

    +
    + +

    TIFFWriteRawStrip

    +    		 + +

    write a raw strip of data

    +
    + +

    TIFFWriteRawTile

    +    		 + +

    write a raw tile of data

    +
    + +

    TIFFWriteScanline

    +    		 + +

    write a scanline of data

    +
    + +

    TIFFWriteTile

    +    		 + +

    compress and write a tile of data

    +
    + +

    TIFFXYZToRGB

    +    		 + +

    perform CIE XYZ to RGB conversion

    +
    + +

    TIFFYCbCrToRGBInit

    +    		 + +

    initialize YCbCr to RGB conversion state

    +
    + +

    TIFFYCbCrtoRGB

    +    		 + +

    perform YCbCr to RGB conversion

    +
    + + + + + +
    +

    Auxiliary functions:

    + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    _TIFFfree

    +    		 + +

    free memory buffer

    +
    + +

    _TIFFmalloc

    +    		 + +

    dynamically allocate memory buffer

    +
    + +

    _TIFFmemcmp

    +    		 + +

    compare contents of the memory buffers

    +
    + +

    _TIFFmemcpy

    +    		 + +

    copy contents of the one buffer to +another

    +
    + +

    _TIFFmemset

    +    		 + +

    fill memory buffer with a constant byte

    +
    + +

    _TIFFrealloc

    +    		 + +

    dynamically reallocate memory buffer

    +
    + +

    TAG USAGE

    + + + + +
    +

    The table below lists the TIFF tags that +are recognized and handled by the library. If no use is +indicated in the table, then the library reads and writes +the tag, but does not use it internally. Note that some tags +are meaningful only when a particul \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/html/man/pal2rgb.1.html b/src/SDL2/external/tiff-4.0.3/html/man/pal2rgb.1.html new file mode 100644 index 000000000..d06ddb6da --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/pal2rgb.1.html @@ -0,0 +1,189 @@ + + + + + + +PAL2RGB + + + +

    PAL2RGB

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    pal2rgb − convert a palette color +TIFF image to a full color image

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    pal2rgb [ options ] input.tif +output.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Pal2rgb converts a palette color +TIFF image to a full color image by applying +the colormap of the palette image to each sample to generate +a full color RGB image.

    +
    + +

    OPTIONS

    + + + + + +
    +

    Options that affect the interpretation of input data +are:

    +
    + + + + + + + + +
    + +

    −C

    +    		 + +

    This option overrides the default behavior of +pal2rgb in determining whether or not colormap +entries contain 16-bit or 8-bit values. By default the +colormap is inspected and if no colormap entry greater than +255 is found, the colormap is assumed to have only 8-bit +values; otherwise 16-bit values (as required by the +TIFF specification) are assumed. The +−C option can be used to explicitly specify the +number of bits for colormap entries: −C 8 for +8-bit values, −C 16 for 16-bit values.

    +    		 +
    + + + + + +
    +

    Options that affect the output file format are:

    +
    + + + + + + + + + + + + + + + + + + + + +
    + +

    −p

    +    		 + +

    Explicitly select the planar configuration used in +organizing data samples in the output image: −p +contig for samples packed contiguously, and −p +separate for samples stored separately. By default +samples are packed.

    +    		 +
    + +

    −c

    +    		 + +

    Use the specific compression algorithm to encoded image +data in the output file: −c packbits for +Macintosh Packbits, −c lzw for Lempel-Ziv & +Welch, −c zip for Deflate, −c none +for no compression. If no compression-related option is +specified, the input file’s compression algorithm is +used.

    +    		 +
    + +

    −r

    +    		 + +

    Explicitly specify the number of rows in each strip of +the output file. If the −r option is not +specified, a number is selected such that each output strip +has approximately 8 kilobytes of data in it.

    +    		 +
    + +

    BUGS

    + + + + + +
    +

    Only 8-bit images are handled.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    tiffinfo(1), tiffcp(1), +tiffmedian(1), libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/ppm2tiff.1.html b/src/SDL2/external/tiff-4.0.3/html/man/ppm2tiff.1.html new file mode 100644 index 000000000..e3c664e26 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/ppm2tiff.1.html @@ -0,0 +1,141 @@ + + + + + + +PPM2TIFF + + + +

    PPM2TIFF

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    ppm2tiff − create a TIFF file from +PPM, PGM and PBM image +files

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    ppm2tiff [ options ] [ input.ppm ] +output.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    ppm2tiff converts a file in the PPM, +PGM and PBM image formats to +TIFF. By default, the TIFF +image is created with data samples packed +(PlanarConfiguration=1), compressed with the Packbits +algorithm (Compression=32773), and with each strip no +more than 8 kilobytes. These characteristics can be +overridden, or explicitly specified with the options +described below

    + +

    If the PPM file contains greyscale data, +then the PhotometricInterpretation tag is set to 1 +(min-is-black), otherwise it is set to 2 (RGB).

    + +

    If no PPM file is specified on the command +line, ppm2tiff will read from the standard input.

    +
    + +

    OPTIONS

    + + + + + + + + + + + + + + + + + + + + +
    + +

    −c

    +    		 + +

    Specify a compression scheme to use when writing image +data: none for no compression, packbits for +PackBits compression (will be used by default), lzw +for Lempel-Ziv & Welch compression, jpeg for +baseline JPEG compression, zip for Deflate +compression, g3 for CCITT Group 3 (T.4) compression, +and g4 for CCITT Group 4 (T.6) compression.

    +    		 +
    + +

    −r

    +    		 + +

    Write data with a specified number of rows per strip; by +default the number of rows/strip is selected so that each +strip is approximately 8 kilobytes.

    +    		 +
    + +

    −R

    +    		 + +

    Mark the resultant image to have the specified X and Y +resolution (in dots/inch).

    +    		 +
    + +

    SEE ALSO

    + + + + + +
    +

    tiffinfo(1), tiffcp(1), +tiffmedian(1), libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/ras2tiff.1.html b/src/SDL2/external/tiff-4.0.3/html/man/ras2tiff.1.html new file mode 100644 index 000000000..2c652aba6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/ras2tiff.1.html @@ -0,0 +1,139 @@ + + + + + + +RAS2TIFF + + + +

    RAS2TIFF

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    ras2tiff − create a TIFF file from a +Sun rasterfile

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    ras2tiff [ options ] input.ras +output.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    ras2tiff converts a file in the Sun rasterfile +format to TIFF. By default, the +TIFF image is created with data samples +packed (PlanarConfiguration=1), compressed with the +Lempel-Ziv & Welch algorithm (Compression=5), and +with each strip no more than 8 kilobytes. These +characteristics can overridden, or explicitly specified with +the options described below.

    + +

    Any colormap information in the rasterfile is carried +over to the TIFF file by including a +Colormap tag in the output file. If the rasterfile +has a colormap, the PhotometricInterpretation tag is +set to 3 (palette); otherwise it is set to 2 (RGB) if the +depth is 24 or 1 (min-is-black) if the depth is not 24.

    +
    + +

    OPTIONS

    + + + + + + + + + + + + + + +
    + +

    −c

    +    		 + +

    Specify a compression scheme to use when writing image +data: −c none for no compression, −c +packbits for the PackBits compression algorithm, +−c jpeg for the baseline JPEG compression +algorithm, −c zip for the Deflate compression +algorithm, and −c lzw for Lempel-Ziv & +Welch (the default).

    +    		 +
    + +

    −r

    +    		 + +

    Write data with a specified number of rows per strip; by +default the number of rows/strip is selected so that each +strip is approximately 8 kilobytes.

    +    		 +
    + +

    BUGS

    + + + + + +
    +

    Does not handle all possible rasterfiles. In particular, +ras2tiff does not handle run-length encoded +images.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    pal2rgb(1), tiffinfo(1), tiffcp(1), +tiffmedian(1), libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/raw2tiff.1.html b/src/SDL2/external/tiff-4.0.3/html/man/raw2tiff.1.html new file mode 100644 index 000000000..ce47e9f80 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/raw2tiff.1.html @@ -0,0 +1,510 @@ + + + + + + +RAW2TIFF + + + +

    RAW2TIFF

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +GUESSING THE IMAGE GEOMETRY
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    raw2tiff − create a TIFF file from a +raw data

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    raw2tiff [ options ] input.raw +output.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    raw2tiff converts a raw byte sequence into +TIFF. By default, the TIFF +image is created with data samples packed +(PlanarConfiguration=1), compressed with the PackBits +algorithm (Compression=32773), and with each strip no +more than 8 kilobytes. These characteristics can overridden, +or explicitly specified with the options described +below.

    +
    + +

    OPTIONS

    + + + + + +
    +

    −H number

    + + + + + +
    +

    size of input image file header in bytes (0 by default). +This amount of data just will be skipped from the start of +file while reading.

    +
    + + + + + +
    +

    −w number

    + + + + + +
    +

    width of input image in pixels (can be guessed, see +GUESSING THE IMAGE GEOMETRY +below).

    +
    + + + + + +
    +

    −l number

    + + + + + +
    +

    length of input image in lines (can be guessed, see +GUESSING THE IMAGE GEOMETRY +below).

    +
    + + + + + +
    +

    −b number

    + + + + + +
    +

    number of bands in input image (1 by default).

    +
    + + + + + +
    +

    −d data_type

    + + + + + +
    +

    type of samples in input image, where data_type +may be:

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    byte

    +    		 + +

    8-bit unsigned integer (default),

    +
    + +

    short

    +    		 + +

    16-bit unsigned integer,

    +
    + +

    long

    +    		 + +

    32-bit unsigned integer,

    +
    + +

    sbyte

    +    		 + +

    8-bit signed integer,

    +
    + +

    sshort

    +    		 + +

    16-bit signed integer,

    +
    + +

    slong

    +    		 + +

    32-bit signed integer,

    +
    + +

    float

    +    		 + +

    32-bit IEEE floating point,

    +
    + +

    double

    +    		 + +

    64-bit IEEE floating point.

    +
    + + + + + +
    +

    −i config

    + + + + + +
    +

    type of samples interleaving in input image, where +config may be:

    + + + + + + + + + + +
    + +

    pixel

    +    		 + +

    pixel interleaved data (default),

    +
    + +

    band

    +    		 + +

    band interleaved data.

    +
    + + + + + +
    +

    −p photo

    + + + + + +
    +

    photometric interpretation (color space) of the input +image, where photo may be:

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    miniswhite

    +    		 + +

    white color represented with 0 value,

    +
    + +

    minisblack

    +    		 + +

    black color represented with 0 value (default),

    +
    + +

    rgb

    +    		 + +

    image has RGB color model,

    +
    + +

    cmyk

    +    		 + +

    image has CMYK (separated) color model,

    +
    + +

    ycbcr

    +    		 + +

    image has YCbCr color model,

    +
    + +

    cielab

    +    		 + +

    image has CIE L*a*b color model,

    +
    + +

    icclab

    +    		 + +

    image has ICC L*a*b color model,

    +
    + +

    itulab

    +    		 + +

    image has ITU L*a*b color model.

    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −s

    +    		 + +

    swap bytes fetched from the input file.

    +    		 +
    + +

    −L

    +    		 + +

    input data has LSB2MSB bit order (default).

    +    		 +
    + +

    −M

    +    		 + +

    input data has MSB2LSB bit order.

    +    		 +
    + +

    −c

    +    		 + +

    Specify a compression scheme to use when writing image +data: −c none for no compression, −c +packbits for the PackBits compression algorithm (the +default), −c jpeg for the baseline JPEG +compression algorithm, −c zip for the Deflate +compression algorithm, and −c lzw for +Lempel-Ziv & Welch.

    +    		 +
    + + + + + +
    +

    −r number

    + + + + + +
    +

    Write data with a specified number of rows per strip; by +default the number of rows/strip is selected so that each +strip is approximately 8 kilobytes.

    +
    + +

    GUESSING THE IMAGE GEOMETRY

    + + + + + +
    +

    raw2tiff can guess image width and height in case +one or both of these parameters are not specified. If you +omit one of those parameters, the complementary one will be +calculated based on the file size (taking into account +header size, number of bands and data type). If you omit +both parameters, the statistical approach will be used. +Utility will compute correlation coefficient between two +lines at the image center using several appropriate line +sizes and the highest absolute value of the coefficient will +indicate the right line size. That is why you should be +cautious with the very large images, because guessing +process may take a while (depending on your system +performance). Of course, the utility can’t guess the +header size, number of bands and data type, so it should be +specified manually. If you don’t know anything about +your image, just try with the several combinations of those +options.

    + +

    There is no magic, it is just a mathematical statistics, +so it can be wrong in some cases. But for most ordinary +images guessing method will work fine.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    pal2rgb(1), tiffcp(1), +tiffmedian(1), libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/rgb2ycbcr.1.html b/src/SDL2/external/tiff-4.0.3/html/man/rgb2ycbcr.1.html new file mode 100644 index 000000000..dcd88d14b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/rgb2ycbcr.1.html @@ -0,0 +1,155 @@ + + + + + + +RGB2YCBCR + + + +

    RGB2YCBCR

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    rgb2ycbcr − convert non-YCbCr TIFF +images to a YCbCr TIFF image

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    rgb2ycbcr [ options ] src1.tif src2.tif +... dst.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    rgb2ycbcr converts RGB color, +greyscale, or bi-level TIFF images to YCbCr +images by transforming and sampling pixel data. If multiple +files are specified on the command line each source file is +converted to a separate directory in the destination +file.

    + +

    By default, chrominance samples are created by sampling 2 +by 2 blocks of luminance values; this can be changed with +the −h and −v options. Output data +are compressed with the PackBits compression +scheme, by default; an alternate scheme can be selected with +the −c option. By default, output data are +compressed in strips with the number of rows in each strip +selected so that the size of a strip is never more than 8 +kilobytes; the −r option can be used to +explicitly set the number of rows per strip.

    +
    + +

    OPTIONS

    + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −c

    +    		 + +

    Specify a compression scheme to use when writing image +data: −c none for no compression, −c +packbits for the PackBits compression algorithm (the +default), −c jpeg for the JPEG compression +algorithm, −c zip for the deflate compression +algorithm, and −c lzw for Lempel-Ziv & +Welch.

    +    		 +
    + +

    −h

    +    		 + +

    Set the horizontal sampling dimension to one of: 1, 2 +(default), or 4.

    +    		 +
    + +

    −r

    +    		 + +

    Write data with a specified number of rows per strip; by +default the number of rows/strip is selected so that each +strip is approximately 8 kilobytes.

    +    		 +
    + +

    −v

    +    		 + +

    Set the vertical sampling dimension to one of: 1, 2 +(default), or 4.

    +    		 +
    + +

    SEE ALSO

    + + + + + +
    +

    tiffinfo(1), tiffcp(1), +libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/sgi2tiff.1.html b/src/SDL2/external/tiff-4.0.3/html/man/sgi2tiff.1.html new file mode 100644 index 000000000..7665a6e42 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/sgi2tiff.1.html @@ -0,0 +1,147 @@ + + + + + + +SGI2TIFF + + + +

    SGI2TIFF

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    sgi2tiff − create a TIFF file from +an SGI image file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    sgi2tiff [ options ] input.rgb +output.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    sgi2tiff converts a file in the SGI +image format to TIFF. By default, the +TIFF image is created with data samples +packed (PlanarConfiguration=1), compressed with the +Lempel-Ziv & Welch algorithm (Compression=5), and +with each strip no more than 8 kilobytes. These +characteristics can overridden, or explicitly specified with +the options described below.

    +
    + +

    OPTIONS

    + + + + + + + + + + + + + + + + + + + + +
    + +

    −c

    +    		 + +

    Specify a compression scheme to use when writing image +data: −c none for no compression, −c +packbits for the PackBits compression algorithm), +−c jpeg for the baseline JPEG compression +algorithm, −c zip for the Deflate compression +algorithm, and −c lzw for Lempel-Ziv & +Welch (the default).

    +    		 +
    + +

    −p

    +    		 + +

    Explicitly select the planar configuration used in +organizing data samples in the output image: −p +contig for samples packed contiguously, and −p +separate for samples stored separately. By default +samples are packed.

    +    		 +
    + +

    −r

    +    		 + +

    Write data with a specified number of rows per strip; by +default the number of rows/strip is selected so that each +strip is approximately 8 kilobytes.

    +    		 +
    + +

    BUGS

    + + + + + +
    +

    Does not record colormap information.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    tiffinfo(1), tiffcp(1), +tiffmedian(1), libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/thumbnail.1.html b/src/SDL2/external/tiff-4.0.3/html/man/thumbnail.1.html new file mode 100644 index 000000000..2d1f3c9af --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/thumbnail.1.html @@ -0,0 +1,148 @@ + + + + + + +THUMBNAIL + + + +

    THUMBNAIL

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    thumbnail − create a TIFF file with +thumbnail images

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    thumbnail [ options ] input.tif +output.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    thumbnail is a program written to show how one +might use the SubIFD tag (#330) to store thumbnail images. +thumbnail copies a TIFF Class F +facsimile file to the output file and for each image an +8-bit greyscale thumbnail sketch. The output file +contains the thumbnail image with the associated +full-resolution page linked below with the SubIFD tag.

    + +

    By default, thumbnail images are 216 pixels wide by 274 +pixels high. Pixels are calculated by sampling and filtering +the input image with each pixel value passed through a +contrast curve.

    +
    + +

    OPTIONS

    + + + + + + + + + + + + + + + + + + + + +
    + +

    −w

    +    		 + +

    Specify the width of thumbnail images in pixels.

    +    		 +
    + +

    −h

    +    		 + +

    Specify the height of thumbnail images in pixels.

    +    		 +
    + +

    −c

    +    		 + +

    Specify a contrast curve to apply in generating the +thumbnail images. By default pixels values are passed +through a linear contrast curve that simply maps the pixel +value ranges. Alternative curves are: exp50 for a 50% +exponential curve, exp60 for a 60% exponential curve, +exp70 for a 70% exponential curve, exp80 for a +80% exponential curve, exp90 for a 90% exponential +curve, exp for a pure exponential curve, +linear for a linear curve.

    +    		 +
    + +

    BUGS

    + + + + + +
    +

    There are no options to control the format of the saved +thumbnail images.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    tiffdump(1), tiffgt(1), tiffinfo(1), +libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiff2bw.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiff2bw.1.html new file mode 100644 index 000000000..1ebb4d392 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiff2bw.1.html @@ -0,0 +1,161 @@ + + + + + + +TIFF2BW + + + +

    TIFF2BW

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiff2bw − convert a color TIFF image +to greyscale

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiff2bw [ options ] input.tif +output.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Tiff2bw converts an RGB or Palette +color TIFF image to a greyscale image by +combining percentages of the red, green, and blue channels. +By default, output samples are created by taking 28% of the +red channel, 59% of the green channel, and 11% of the blue +channel. To alter these percentages, the −R, +−G, and −B options may be +used.

    +
    + +

    OPTIONS

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −c

    +    		 + +

    Specify a compression scheme to use when writing image +data: −c none for no compression, −c +packbits for the PackBits compression algorithm, +−c zip for the Deflate compression algorithm, +−c g3 for the CCITT Group 3 compression +algorithm, −c g4 for the CCITT Group 4 +compression algorithm, and −c lzw for +Lempel-Ziv & Welch (the default).

    +    		 +
    + +

    −r

    +    		 + +

    Write data with a specified number of rows per strip; by +default the number of rows/strip is selected so that each +strip is approximately 8 kilobytes.

    +    		 +
    + +

    −R

    +    		 + +

    Specify the percentage of the red channel to use +(default 28).

    +    		 +
    + +

    −G

    +    		 + +

    Specify the percentage of the green channel to use +(default 59).

    +    		 +
    + +

    −B

    +    		 + +

    Specify the percentage of the blue channel to use +(default 11).

    +    		 +
    + +

    SEE ALSO

    + + + + + +
    +

    pal2rgb(1), tiffinfo(1), tiffcp(1), +tiffmedian(1), libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiff2pdf.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiff2pdf.1.html new file mode 100644 index 000000000..3b6dd4b1d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiff2pdf.1.html @@ -0,0 +1,609 @@ + + + + + + +TIFF2PDF + + + +

    TIFF2PDF

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +EXAMPLES
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiff2pdf − convert a TIFF image to a PDF +document

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiff2pdf [ options ] input.tiff

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    tiff2pdf opens a TIFF image and writes a PDF +document to standard output.

    + +

    The program converts one TIFF file to one PDF file, +including multiple page TIFF files, tiled TIFF files, black +and white. grayscale, and color TIFF files that contain data +of TIFF photometric interpretations of bilevel, grayscale, +RGB, YCbCr, CMYK separation, and ICC L*a*b* as supported by +libtiff and PDF.

    + +

    If you have multiple TIFF files to convert into one PDF +file then use tiffcp or other program to concatenate +the files into a multiple page TIFF file. If the input TIFF +file is of huge dimensions (greater than 10000 pixels height +or width) convert the input image to a tiled TIFF if it is +not already.

    + +

    The standard output is standard output. Set the output +file name with the −o output.pdf +option.

    + +

    All black and white files are compressed into a single +strip CCITT G4 Fax compressed PDF, unless tiled, where tiled +black and white images are compressed into tiled CCITT G4 +Fax compressed PDF, libtiff CCITT support is +assumed.

    + +

    Color and grayscale data can be compressed using either +JPEG compression, ITU-T T.81, or Zip/Deflate LZ77 +compression. Set the compression type using the +−j or −z options. JPEG compression +support requires that libtiff be configured with JPEG +support, and Zip/Deflate compression support requires that +libtiff be configured with Zip support, in +tiffconf.h. Use only one or the other of −j and +−z.

    + +

    If the input TIFF contains single strip CCITT G4 Fax +compressed information, then that is written to the PDF file +without transcoding, unless the options of no compression +and no passthrough are set, −d and +−n.

    + +

    If the input TIFF contains JPEG or single strip +Zip/Deflate compressed information, and they are configured, +then that is written to the PDF file without transcoding, +unless the options of no compression and no passthrough are +set.

    + +

    The default page size upon which the TIFF image is placed +is determined by the resolution and extent of the image +data. Default values for the TIFF image resolution can be +set using the −x and −y options. +The page size can be set using the −p option +for paper size, or −w and −l for +paper width and length, then each page of the TIFF image is +centered on its page. The distance unit for default +resolution and page width and length can be set by the +−u option, the default unit is inch.

    + +

    Various items of the output document information can be +set with the −e, −c, +−a, −t, −s, and +−k options. Setting the argument of the option +to "" for these tags causes the relevant document +information field to be not written. Some of the document +information values otherwise get their information from the +input TIFF image, the software, author, document name, and +image description.

    + +

    The Portable Document Format (PDF) specification is +copyrighted by Adobe Systems, Incorporated.

    +
    + +

    OPTIONS

    + + + + + +
    +

    −o output-file

    + + + + + +
    +

    Set the output to go to file. output-file

    +
    + + + + + + + + + + + + +
    + +

    −j

    +    		 + +

    Compress with JPEG (requires libjpeg configured +with libtiff).

    +
    + +

    −z

    +    		 + +

    Compress with Zip/Deflate (requires zlib +configured with libtiff).

    +
    + + + + + +
    +

    −q quality

    + + + + + +
    +

    Set the compression quality, 1-100 for JPEG.

    +
    + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −n

    +    		 + +

    Do not allow data to be converted without uncompressing, +no compressed data passthrough.

    +
    + +

    −b

    +    		 + +

    Set PDF ‘‘Interpolate’’ user +preference.

    +
    + +

    −d

    +    		 + +

    Do not compress (decompress).

    +
    + +

    −i

    +    		 + +

    Invert colors.

    +
    + + + + + +
    +

    −p paper-size

    + + + + + +
    +

    Set paper size, e.g., letter, legal, +A4.

    +
    + + + + + +
    +

    −u [i|m]

    + + + + + +
    +

    Set distance unit, i for inch, m for +centimeter.

    +
    + + + + + +
    +

    −w width

    + + + + + +
    +

    Set width in units.

    +
    + + + + + +
    +

    −l length

    + + + + + +
    +

    Set length in units.

    +
    + + + + + +
    +

    −x xres

    + + + + + +
    +

    Set x/width resolution default.

    +
    + + + + + +
    +

    −y yres

    + + + + + +
    +

    Set y/length resolution default.

    +
    + + + + + +
    +

    −r [d|o]

    + + + + + +
    +

    Set d for resolution default for images without +resolution, o for resolution override for all +images.

    +
    + + + + + + + + +
    + +

    −f

    +    		 + +

    Set PDF ‘‘Fit Window’’ user +preference.

    +    		 +
    + + + + + +
    +

    −e YYYYMMDDHHMMSS

    + + + + + +
    +

    Set document information date, overrides image or current +date/time default, YYYYMMDDHHMMSS.

    +
    + + + + + +
    +

    −c creator

    + + + + + +
    +

    Set document information creator, overrides image +software default.

    +
    + + + + + +
    +

    −a author

    + + + + + +
    +

    Set document information author, overrides image artist +default.

    +
    + + + + + +
    +

    −t title

    + + + + + +
    +

    Set document information title, overrides image document +name default.

    +
    + + + + + +
    +

    −s subject

    + + + + + +
    +

    Set document information subject, overrides image image +description default.

    +
    + + + + + +
    +

    −k keywords

    + + + + + +
    +

    Set document information keywords.

    +
    + + + + + + + + +
    + +

    −h

    +    		 + +

    List usage reminder to stderr and exit.

    +    		 +
    + +

    EXAMPLES

    + + + + + +
    +

    The following example would generate the file output.pdf +from input.tiff.

    + + + + + +
    +
    tiff2pdf −o output.pdf input.tiff
+
    +
    + + + + + + +
    +

    The following example would generate PDF output from +input.tiff and write it to standard output.

    + + + + + +
    +
    tiff2pdf input.tiff
+
    +
    + + + + + + +
    +

    The following example would generate the file output.pdf +from input.tiff, putting the image pages on a letter sized +page, compressing the output with JPEG, with JPEG quality +75, setting the title to +‘‘Document’’, and setting the +‘‘Fit Window’’ option.

    + + + + + +
    +
    tiff2pdf −p letter −j −q 75 −t "Document" −f −o output.pdf input.tiff
+
    +
    + +

    BUGS

    + + + + + + +
    +

    Please report bugs via the web interface at

    +
    + + + + + +
    + +

    http://bugzilla.remotesensing.org/enter_bug.cgi?product=libtiff

    +
    + +

    SEE ALSO

    + + + + + +
    +

    libtiff(3), tiffcp(1), +tiff2ps(1)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiff2ps.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiff2ps.1.html new file mode 100644 index 000000000..ef2cd7f9e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiff2ps.1.html @@ -0,0 +1,532 @@ + + + + + + +TIFF2PS + + + +

    TIFF2PS

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +EXAMPLES
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiff2ps − convert a TIFF image to +PostScript™

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiff2ps [ options ] input.tif +...

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    tiff2ps reads TIFF images and +writes PostScript or Encapsulated PostScript (EPS) on the +standard output. By default, tiff2ps writes +Encapsulated PostScript for the first image in the specified +TIFF image file.

    + +

    By default, tiff2ps will generate PostScript that +fills a printed area specified by the TIFF +tags in the input file. If the file does not contain +XResolution or YResolution tags, then the +printed area is set according to the image dimensions. The +−w and −h options (see below) can +be used to set the dimensions of the printed area in inches; +overriding any relevant TIFF tags.

    + +

    The PostScript generated for RGB, palette, +and CMYK images uses the colorimage +operator. The PostScript generated for greyscale and bilevel +images uses the image operator. When the +colorimage operator is used, PostScript code to +emulate this operator on older PostScript printers is also +generated. Note that this emulation code can be very +slow.

    + +

    Color images with associated alpha data are composited +over a white background.

    +
    + +

    OPTIONS

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −1

    +    		 + +

    Generate PostScript Level 1 (the default).

    +    		 +
    + +

    −2

    +    		 + +

    Generate PostScript Level 2.

    +    		 +
    + +

    −3

    +    		 + +

    Generate PostScript Level 3. It basically allows one to +use the /flateDecode filter for ZIP compressed TIFF +images.

    +    		 +
    + +

    −a

    +    		 + +

    Generate output for all IFDs (pages) in the input +file.

    +    		 +
    + +

    −b

    +    		 + +

    Specify the bottom margin for the output (in inches). +This does not affect the height of the printed image.

    +    		 +
    + +

    −c

    +    		 + +

    Center the image in the output. This option only shows +an effect if both the −w and the +−h option are given.

    +    		 +
    + +

    −d

    +    		 + +

    Set the initial TIFF directory to the +specified directory number. (NB: Directories are numbered +starting at zero.) This option is useful for selecting +individual pages in a multi-page (e.g. facsimile) file.

    +    		 +
    + +

    −e

    +    		 + +

    Force the generation of Encapsulated PostScript (implies +−z).

    +    		 +
    + +

    −h

    +    		 + +

    Specify the vertical size of the printed area (in +inches).

    +    		 +
    + +

    −H

    +    		 + +

    Specify the maximum height of image (in inches). Images +with larger sizes will be split in several pages. Option +−L may be used for specifying size of split +images overlapping.

    +    		 +
    + +

    −i

    +    		 + +

    Enable/disable pixel interpolation. This option requires +a single numeric value: zero to disable pixel interpolation +and non-zero to enable. The default is enabled.

    +    		 +
    + +

    −L

    +    		 + +

    Specify the size of overlapping for split images (in +inches). Used in conjunction with −H +option.

    +    		 +
    + +

    −l

    +    		 + +

    Specify the left margin for the output (in inches). This +does not affect the width of the printed image.

    +    		 +
    + +

    −m

    +    		 + +

    Where possible render using the imagemask +PostScript operator instead of the image operator. +When this option is specified tiff2ps will use +imagemask for rendering 1 bit deep images. If this +option is not specified or if the image depth is greater +than 1 then the image operator is used.

    +    		 +
    + +

    −o

    +    		 + +

    Set the initial TIFF directory to the +IFD at the specified file offset. This option +is useful for selecting thumbnail images and the like which +are hidden using the SubIFD tag.

    +    		 +
    + +

    −p

    +    		 + +

    Force the generation of (non-Encapsulated) +PostScript.

    +    		 +
    + +

    −r

    +    		 + +

    Rotate image by 180 degrees.

    +    		 +
    + +

    −s

    +    		 + +

    Generate output for a single IFD (page) in the input +file.

    +    		 +
    + +

    −w

    +    		 + +

    Specify the horizontal size of the printed area (in +inches).

    +    		 +
    + +

    −x

    +    		 + +

    Override resolution units specified in the TIFF as +centimeters.

    +    		 +
    + +

    −y

    +    		 + +

    Override resolution units specified in the TIFF as +inches.

    +    		 +
    + +

    −z

    +    		 + +

    When generating PostScript Level 2, data is scaled so +that it does not image into the deadzone on a page +(the outer margin that the printing device is unable to +mark). This option suppresses this behavior. When PostScript +Level 1 is generated, data is imaged to the entire printed +page and this option has no affect.

    +    		 +
    + +

    EXAMPLES

    + + + + + +
    +

    The following generates PostScript Level 2 for all pages +of a facsimile:

    + + + + + +
    +
    tiff2ps −a2 fax.tif | lpr
+
    +
    + + + + + + +
    +

    Note also that if you have version 2.6.1 or newer of +Ghostscript then you can efficiently preview facsimile +generated with the above command.

    + +

    To generate Encapsulated PostScript for a the image at +directory 2 of an image use:

    + + + + + +
    +
    tiff2ps −d 1 foo.tif
+
    +
    + + + + + + +
    +

    (Notice that directories are numbered starting at +zero.)

    + +

    If you have a long image, it may be split in several +pages:

    + + + + + +
    +
    tiff2ps −h11 −w8.5 −H14 −L.5 foo.tif > foo.ps
+
    +
    + + + + + + +
    +

    The page size is set to 8.5x11 by −w and +−h options. We will accept a small amount of +vertical compression, so −H set to 14. Any +pages between 11 and 14 inches will be fit onto one page. +Pages longer than 14 inches are cut off at 11 and continued +on the next page. The −L.5 option says to +repeat a half inch on the next page (to improve +readability).

    +
    + +

    BUGS

    + + + + + +
    +

    Because PostScript does not support the notion of a +colormap, 8-bit palette images produce 24-bit PostScript +images. This conversion results in output that is six times +bigger than the original image and which takes a long time +to send to a printer over a serial line. Matters are even +worse for 4-, 2-, and 1-bit palette images.

    + +

    Does not handle tiled images when generating PostScript +Level I output.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    pal2rgb(1), tiffinfo(1), tiffcp(1), +tiffgt(1), tiffmedian(1), tiff2bw(1), +tiffsv(1), libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiff2rgba.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiff2rgba.1.html new file mode 100644 index 000000000..35e06a54e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiff2rgba.1.html @@ -0,0 +1,162 @@ + + + + + + +TIFF2RGBA + + + +

    TIFF2RGBA

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiff2rgba − convert a TIFF image to +RGBA color space

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiff2rgba [ options ] input.tif +output.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Tiff2rgba converts a wide variety of TIFF images +into an RGBA TIFF image. This includes the ability to +translate different color spaces and photometric +interpretation into RGBA, support for alpha blending, and +translation of many different bit depths into a 32bit RGBA +image.

    + +

    Internally this program is implemented using the +TIFFReadRGBAImage() function, and it suffers any +limitations of that image. This includes limited support for +> 8 BitsPerSample images, and flaws with some esoteric +combinations of BitsPerSample, photometric interpretation, +block organization and planar configuration.

    + +

    The generated images are stripped images with four +samples per pixel (red, green, blue and alpha) or if the +−n flag is used, three samples per pixel (red, +green, and blue). The resulting images are always planar +configuration contiguous. For this reason, this program is a +useful utility for transform exotic TIFF files into a form +ingestible by almost any TIFF supporting software.

    +
    + +

    OPTIONS

    + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −c

    +    		 + +

    Specify a compression scheme to use when writing image +data: −c none for no compression (the default), +−c packbits for the PackBits compression +algorithm, −c zip for the Deflate compression +algorithm, −c jpeg for the JPEG compression +algorithm, and −c lzw for Lempel-Ziv & +Welch.

    +    		 +
    + +

    −r

    +    		 + +

    Write data with a specified number of rows per strip; by +default the number of rows/strip is selected so that each +strip is approximately 8 kilobytes.

    +    		 +
    + +

    −b

    +    		 + +

    Process the image one block (strip/tile) at a time +instead of by reading the whole image into memory at once. +This may be necessary for very large images on systems with +limited RAM.

    +    		 +
    + +

    −n

    +    		 + +

    Drop the alpha component from the output file, producing +a pure RGB file. Currently this does not work if the +−b flag is also in effect.

    +    		 +
    + +

    SEE ALSO

    + + + + + +
    +

    tiff2bw(1), TIFFReadRGBAImage(3t), +libtiff(3)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiffcmp.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiffcmp.1.html new file mode 100644 index 000000000..acd2e90f0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiffcmp.1.html @@ -0,0 +1,156 @@ + + + + + + +TIFFCMP + + + +

    TIFFCMP

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiffcmp − compare two TIFF files

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiffcmp [ options ] file1.tif +file2.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Tiffcmp compares the tags and data in two files +created according to the Tagged Image File Format, Revision +6.0. The schemes used for compressing data in each file are +immaterial when data are compared−data are compared on +a scanline-by-scanline basis after decompression. Most +directory tags are checked; notable exceptions are: +GrayResponseCurve, ColorResponseCurve, and +ColorMap tags. Data will not be compared if any of +the BitsPerSample, SamplesPerPixel, or +ImageWidth values are not equal. By default, +tiffcmp will terminate if it encounters any +difference.

    +
    + +

    OPTIONS

    + + + + + + + + +
    + +

    −l

    +    		 + +

    List each byte of image data that differs between the +files.

    +    		 +
    + + + + + +
    +

    −z number

    + + + + + +
    +

    List specified number of image data bytes that differs +between the files.

    +
    + + + + + + + + +
    + +

    −t

    +    		 + +

    Ignore any differences in directory tags.

    +    		 +
    + +

    BUGS

    + + + + + +
    +

    Tags that are not recognized by the library are not +compared; they may also generate spurious diagnostics.

    + +

    The image data of tiled files is not compared, since the +TIFFReadScanline() function is used. An error will be +reported for tiled files.

    + +

    The pixel and/or sample number reported in differences +may be off in some exotic cases.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    pal2rgb(1), tiffcp(1), +tiffmedian(1), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiffcp.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiffcp.1.html new file mode 100644 index 000000000..4c7fcb62f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiffcp.1.html @@ -0,0 +1,536 @@ + + + + + + +TIFFCP + + + +

    TIFFCP

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +EXAMPLES
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiffcp − copy (and possibly convert) a +TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiffcp [ options ] src1.tif ... srcN.tif +dst.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    tiffcp combines one or more files created +according to the Tag Image File Format, Revision 6.0 into a +single TIFF file. Because the output file may +be compressed using a different algorithm than the input +files, tiffcp is most often used to convert between +different compression schemes.

    + +

    By default, tiffcp will copy all the understood +tags in a TIFF directory of an input file to +the associated directory in the output file.

    + +

    tiffcp can be used to reorganize the storage +characteristics of data in a file, but it is explicitly +intended to not alter or convert the image data content in +any way.

    +
    + +

    OPTIONS

    + + + + + +
    +

    −b image

    + + + + + +
    +

    subtract the following monochrome image from all others +processed. This can be used to remove a noise bias from a +set of images. This bias image is typically an image of +noise the camera saw with its shutter closed.

    +
    + + + + + + + + + + + + + + + + + + + + +
    + +

    −B

    +    		 + +

    Force output to be written with Big-Endian byte order. +This option only has an effect when the output file is +created or overwritten and not when it is appended to.

    +    		 +
    + +

    −C

    +    		 + +

    Suppress the use of ‘‘strip +chopping’’ when reading images that have a +single strip/tile of uncompressed data.

    +    		 +
    + +

    −c

    +    		 + +

    Specify the compression to use for data written to the +output file: none for no compression, packbits +for PackBits compression, lzw for Lempel-Ziv & +Welch compression, jpeg for baseline JPEG +compression, zip for Deflate compression, g3 +for CCITT Group 3 (T.4) compression, and g4 for CCITT +Group 4 (T.6) compression. By default tiffcp will +compress data according to the value of the +Compression tag found in the source file.

    +    		 +
    + + + + + +
    +

    The CCITT Group 3 and Group 4 compression +algorithms can only be used with bilevel data.

    + +

    Group 3 compression can be specified together with +several T.4-specific options: 1d for 1-dimensional +encoding, 2d for 2-dimensional encoding, and +fill to force each encoded scanline to be zero-filled +so that the terminating EOL code lies on a byte boundary. +Group 3-specific options are specified by appending a +‘‘:’’-separated list to the +‘‘g3’’ option; e.g. −c +g3:2d:fill to get 2D-encoded data with byte-aligned EOL +codes.

    + +

    LZW compression can be specified together +with a predictor value. A predictor value of 2 causes +each scanline of the output image to undergo horizontal +differencing before it is encoded; a value of 1 forces each +scanline to be encoded without differencing. LZW-specific +options are specified by appending a +‘‘:’’-separated list to the +‘‘lzw’’ option; e.g. −c +lzw:2 for LZW compression with horizontal +differencing.

    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −f

    +    		 + +

    Specify the bit fill order to use in writing output +data. By default, tiffcp will create a new file with +the same fill order as the original. Specifying −f +lsb2msb will force data to be written with the FillOrder +tag set to LSB2MSB, while −f +msb2lsb will force data to be written with the FillOrder +tag set to MSB2LSB.

    +    		 +
    + +

    −i

    +    		 + +

    Ignore non-fatal read errors and continue processing of +the input file.

    +    		 +
    + +

    −l

    +    		 + +

    Specify the length of a tile (in pixels). tiffcp +attempts to set the tile dimensions so that no more than 8 +kilobytes of data appear in a tile.

    +    		 +
    + +

    −L

    +    		 + +

    Force output to be written with Little-Endian byte +order. This option only has an effect when the output file +is created or overwritten and not when it is appended +to.

    +    		 +
    + +

    −M

    +    		 + +

    Suppress the use of memory-mapped files when reading +images.

    +    		 +
    + +

    −p

    +    		 + +

    Specify the planar configuration to use in writing image +data that has one 8-bit sample per pixel. By default, +tiffcp will create a new file with the same planar +configuration as the original. Specifying −p +contig will force data to be written with multi-sample +data packed together, while −p separate will +force samples to be written in separate planes.

    +    		 +
    + +

    −r

    +    		 + +

    Specify the number of rows (scanlines) in each strip of +data written to the output file. By default (or when value +0 is specified), tiffcp attempts to set the +rows/strip that no more than 8 kilobytes of data appear in a +strip. If you specify special value −1 it will +results in infinite number of the rows per strip. The entire +image will be the one strip in that case.

    +    		 +
    + +

    −s

    +    		 + +

    Force the output file to be written with data organized +in strips (rather than tiles).

    +    		 +
    + +

    −t

    +    		 + +

    Force the output file to be written with data organized +in tiles (rather than strips). options can be used to force +the resultant image to be written as strips or tiles of +data, respectively.

    +    		 +
    + +

    −w

    +    		 + +

    Specify the width of a tile (in pixels). tiffcp +attempts to set the tile dimensions so that no more than 8 +kilobytes of data appear in a tile. tiffcp attempts +to set the tile dimensions so that no more than 8 kilobytes +of data appear in a tile.

    +    		 +
    + +

    −x

    +    		 + +

    Force the output file to be written with PAGENUMBER value +in sequence.

    +    		 +
    + + + + + +
    +

    −,=character

    + + + + + +
    +

    substitute character for ‘,’ in +parsing image directory indices in files. This is necessary +if filenames contain commas. Note that −,= with +whitespace immediately following will disable the special +meaning of the ‘,’ entirely. See examples.

    +
    + +

    EXAMPLES

    + + + + + +
    +

    The following concatenates two files and writes the +result using LZW encoding:

    + + + + + +
    +
    tiffcp −c lzw a.tif b.tif result.tif
+
    +
    + + + + + + +
    +

    To convert a G3 1d-encoded TIFF to a +single strip of G4-encoded data the following might be +used:

    + + + + + +
    +
    tiffcp −c g4 −r 10000 g3.tif g4.tif
+
    +
    + + + + + + +
    +

    (1000 is just a number that is larger than the number of +rows in the source file.)

    + +

    To extract a selected set of images from a multi-image +TIFF file, the file name may be immediately followed by a +‘,’ separated list of image directory indices. +The first image is always in directory 0. Thus, to copy the +1st and 3rd images of image file +‘‘album.tif’’ to +‘‘result.tif’’:

    + + + + + +
    +
    tiffcp album.tif,0,2 result.tif
+
    +
    + + + + + + +
    +

    A trailing comma denotes remaining images in sequence. +The following command will copy all image with except the +first one:

    + + + + + +
    +
    tiffcp album.tif,1, result.tif
+
    +
    + + + + + + +
    +

    Given file ‘‘CCD.tif’’ whose +first image is a noise bias followed by images which include +that bias, subtract the noise from all those images +following it (while decompressing) with the +command:

    + + + + + +
    +
    tiffcp −c none −b CCD.tif CCD.tif,1, result.tif
+
    +
    + + + + + + +
    +

    If the file above were named +‘‘CCD,X.tif’’, the −,= +option would be required to correctly parse this filename +with image numbers, as follows:

    + + + + + +
    +
    tiffcp −c none −,=% −b CCD,X.tif CCD,X%1%.tif result.tif
+
+
    +
    + +

    SEE ALSO

    + + + + + + +
    +

    pal2rgb(1), tiffinfo(1), tiffcmp(1), +tiffmedian(1), tiffsplit(1), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiffcrop.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiffcrop.1.html new file mode 100644 index 000000000..9c1edbbcf --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiffcrop.1.html @@ -0,0 +1,684 @@ + + + + + + +TIFFCROP + + + +

    TIFFCROP

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +EXAMPLES
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiffcrop − copy (and possibly convert and crop or +process) a TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiffcrop [ options ] src1.tif ... +srcN.tif dst.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    tiffcrop combines one or more files created +according to the Tag Image File Format, Revision 6.0 into a +single TIFF file. The output file may be +compressed using a different algorithm than the input files. +tiffcrop is most often used to extract portions of an +image for processing with bar code recognizer or OCR +software when that software cannot restrict the region of +interest to a specific portion of the image or to improve +efficiency when the regions of interest must be rotated.

    + +

    By default, tiffcrop will copy all the understood +tags in a TIFF directory of an input file to +the associated directory in the output file.

    + +

    tiffcrop can be used to reorganize the storage +characteristics of data in a file, and it will alter or +convert the image data content as specified at the same +time, unlike tiffcp.

    + +

    tiffcrop will behave exactly like tiffcp if none +of the new options are specified.

    +
    + +

    OPTIONS

    + + + + + +
    +

    −N odd|even|#,#-#,#|last

    + + + + + +
    +

    sequences and ranges of images within file to process. +The words odd or even may be used to specify +all odd or even numbered images. The word last may be +used in place of a number in the sequence to indicate the +final image in the file without knowing how many images +there are. Ranges of images may be specified with a dash and +multiple sets can be indicated by joining them in a +comma-separated list. e.g.. use −N 1,5-7,last +to process the 1st, 5th through 7th, and final image in the +file.

    +
    + + + + + +
    +

    −E top|bottom|left|right

    + + + + + +
    +

    use the top, bottom, left, or right edge as origin +reference for width and length of crop regions. May be +abbreviated to first letter.

    +
    + + + + + +
    +

    −U in|cm|px

    + + + + + +
    +

    units to apply to dimensions for margins and crop +regions. Inches or centimeters are converted to pixels using +the resolution unit specified in the TIFF file (which +defaults to inches if not specified in the IFD).

    +
    + + + + + +
    +

    −m #,#,#,#

    + + + + + +
    +

    margins to be removed from the image. The order must be +top, left, bottom, right with only commas separating the +elements of the list. Margins are scaled according to the +current units and removed before any other extractions are +computed. Capital M was in use.

    +
    + + + + + + + + + + + + + + +
    + +

    −X #

    +    		 + +

    horizontal (X-axis) dimension of a region to extract +relative to the specified origin reference. If the origin is +the top or bottom edge, the X axis value will be assumed to +start at the left edge.

    +    		 +
    + +

    −Y #

    +    		 + +

    vertical (Y-axis) dimension of a region to extract +relative to the specified origin reference. If the origin is +the left or right edge, the Y axis value will be assumed to +start at the top.

    +    		 +
    + + + + + +
    +

    −Z #:#,#:#

    + + + + + +
    +

    zones of the image designated as position X of Y equal +sized portions measured from the reference edge, e.g. 1:3 +would be first third of the image starting from the +reference edge minus any margins specified for the confining +edges. Multiple zones can be specified as a comma separated +list but they must reference the same edge. To extract the +top quarter and the bottom third of an image you would use +−Z 1:4,3:3.

    +
    + + + + + +
    +

    −F horiz|vert

    + + + + + +
    +

    flip, i.e. mirror, the image or extracted region +horizontally or vertically.

    +
    + + + + + +
    +

    −R 90|180|270

    + + + + + +
    +

    rotate the image or extracted region 90, 180, or 270 +degrees clockwise.

    +
    + + + + + + + + +
    + +

    −I

    +    		 + +

    invert the colorspace values for grayscale and bi-level +images. This would be used to correct negative images that +have incorrect PHOTOMETRIC INTERPRETATION tags. No support +for color images.

    +    		 +
    + + + + + +
    +

    −b image

    + + + + + +
    +

    subtract the following monochrome image from all others +processed. This can be used to remove a noise bias from a +set of images. This bias image is typically an image of +noise the camera saw with its shutter closed. Bias image +support is not available with options for cropping, +rotating, or inverting the image.

    +
    + + + + + + + + + + + + + + + + + + + + +
    + +

    −B

    +    		 + +

    Force output to be written with Big-Endian byte order. +This option only has an effect when the output file is +created or overwritten and not when it is appended to.

    +    		 +
    + +

    −C

    +    		 + +

    Suppress the use of ‘‘strip +chopping’’ when reading images that have a +single strip/tile of uncompressed data.

    +    		 +
    + +

    −c

    +    		 + +

    Specify the compression to use for data written to the +output file: none for no compression, packbits +for PackBits compression, lzw for Lempel-Ziv & +Welch compression, jpeg for baseline JPEG +compression, zip for Deflate compression, g3 +for CCITT Group 3 (T.4) compression, and g4 for CCITT +Group 4 (T.6) compression. By default tiffcrop will +compress data according to the value of the +Compression tag found in the source file.

    +    		 +
    + + + + + +
    +

    The CCITT Group 3 and Group 4 compression +algorithms can only be used with bi-level data.

    + +

    Group 3 compression can be specified together with +several T.4-specific options: 1d for 1-dimensional +encoding, 2d for 2-dimensional encoding, and +fill to force each encoded scanline to be zero-filled +so that the terminating EOL code lies on a byte boundary. +Group 3-specific options are specified by appending a +‘‘:’’-separated list to the +‘‘g3’’ option; e.g. −c +g3:2d:fill to get 2D-encoded data with byte-aligned EOL +codes.

    + +

    LZW compression can be specified together +with a predictor value. A predictor value of 2 causes +each scanline of the output image to undergo horizontal +differencing before it is encoded; a value of 1 forces each +scanline to be encoded without differencing. LZW-specific +options are specified by appending a +‘‘:’’-separated list to the +‘‘lzw’’ option; e.g. −c +lzw:2 for LZW compression with horizontal +differencing.

    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −f

    +    		 + +

    Specify the bit fill order to use in writing output +data. By default, tiffcrop will create a new file +with the same fill order as the original. Specifying +−f lsb2msb will force data to be written with +the FillOrder tag set to LSB2MSB, while +−f msb2lsb will force data to be written with +the FillOrder tag set to MSB2LSB.

    +    		 +
    + +

    −i

    +    		 + +

    Ignore non-fatal read errors and continue processing of +the input file.

    +    		 +
    + +

    −l

    +    		 + +

    Specify the length of a tile (in pixels). +tiffcrop attempts to set the tile dimensions so that +no more than 8 kilobytes of data appear in a tile.

    +    		 +
    + +

    −L

    +    		 + +

    Force output to be written with Little-Endian byte +order. This option only has an effect when the output file +is created or overwritten and not when it is appended +to.

    +    		 +
    + +

    −M

    +    		 + +

    Suppress the use of memory-mapped files when reading +images.

    +    		 +
    + +

    −p

    +    		 + +

    Specify the planar configuration to use in writing image +data that has one 8-bit sample per pixel. By default, +tiffcrop will create a new file with the same planar +configuration as the original. Specifying −p +contig will force data to be written with multi-sample +data packed together, while −p separate will +force samples to be written in separate planes.

    +    		 +
    + +

    −r

    +    		 + +

    Specify the number of rows (scanlines) in each strip of +data written to the output file. By default (or when value +0 is specified), tiffcrop attempts to set the +rows/strip that no more than 8 kilobytes of data appear in a +strip. If you specify special value -1 it will +results in infinite number of the rows per strip. The entire +image will be the one strip in that case.

    +    		 +
    + +

    −s

    +    		 + +

    Force the output file to be written with data organized +in strips (rather than tiles).

    +    		 +
    + +

    −t

    +    		 + +

    Force the output file to be written with data organized +in tiles (rather than strips). options can be used to force +the resultant image to be written as strips or tiles of +data, respectively.

    +    		 +
    + +

    −w

    +    		 + +

    Specify the width of a tile (in pixels). tiffcrop +attempts to set the tile dimensions so that no more than 8 +kilobytes of data appear in a tile. tiffcrop attempts +to set the tile dimensions so that no more than 8 kilobytes +of data appear in a tile.

    +    		 +
    + + + + + +
    +

    −,={character}

    + + + + + +
    +

    substitute {character} for ’,’ in parsing +image directory indices in files. This is necessary if +filenames contain commas. Note that ’,=’ with +whitespace immediately following will disable the special +meaning of the ’,’ entirely. See examples.

    +
    + +

    EXAMPLES

    + + + + + +
    +

    The following concatenates two files and writes the +result using LZW encoding:

    + + + + + +
    +
    tiffcrop -c lzw a.tif b.tif result.tif
+
    +
    + + + + + + +
    +

    To convert a G3 1d-encoded TIFF to a +single strip of G4-encoded data the following might be +used:

    + + + + + +
    +
    tiffcrop -c g4 -r 10000 g3.tif g4.tif
+
    +
    + + + + + + +
    +

    (1000 is just a number that is larger than the number of +rows in the source file.)

    + +

    To extract a selected set of images from a multi-image +TIFF file use the -N option described above. Thus, to copy +the 1st and 3rd images of image file "album.tif" +to "result.tif":

    + + + + + +
    +
    tiffcrop -N 1,3 album.tif result.tif
+
    +
    + + + + + + +
    +

    Given file "CCD.tif" whose first image is a +noise bias followed by images which include that bias, +subtract the noise from all those images following it (while +decompressing) with the command:

    + + + + + +
    +
    tiffcrop -c none -b CCD.tif CCD.tif -d 2 result.tif
+
    +
    + +

    SEE ALSO

    + + + + + + +
    +

    pal2rgb(1), tiffinfo(1), tiffcmp(1), +tiffcp(1), tiffmedian(1), tiffsplit(1), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiffdither.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiffdither.1.html new file mode 100644 index 000000000..5e3cb7c5d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiffdither.1.html @@ -0,0 +1,183 @@ + + + + + + +TIFFDITHER + + + +

    TIFFDITHER

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +NOTES
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiffdither − convert a greyscale image to bilevel +using dithering

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiffdither [ options ] input.tif +output.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    tiffdither converts a single channel 8-bit +greyscale image to a bilevel image using Floyd-Steinberg +error propagation with thresholding.

    +
    + +

    OPTIONS

    + + + + + + + + +
    + +

    −c

    +    		 + +

    Specify the compression to use for data written to the +output file: none for no compression, packbits +for PackBits compression, lzw for Lempel-Ziv & +Welch compression, zip for Deflate compression, +g3 for CCITT Group 3 (T.4) compression, and g4 +for CCITT Group 4 (T.6) compression. By default +tiffdither will compress data according to the value +of the Compression tag found in the source file.

    +    		 +
    + + + + + +
    +

    The CCITT Group 3 and Group 4 compression +algorithms can only be used with bilevel data.

    + +

    Group 3 compression can be specified together with +several T.4-specific options: 1d for 1-dimensional +encoding, 2d for 2-dimensional encoding, and +fill to force each encoded scanline to be zero-filled +so that the terminating EOL code lies on a byte boundary. +Group 3-specific options are specified by appending a +‘‘:’’-separated list to the +‘‘g3’’ option; e.g. −c +g3:2d:fill to get 2D-encoded data with byte-aligned EOL +codes.

    + +

    LZW compression can be specified together +with a predictor value. A predictor value of 2 causes +each scanline of the output image to undergo horizontal +differencing before it is encoded; a value of 1 forces each +scanline to be encoded without differencing. LZW-specific +options are specified by appending a +‘‘:’’-separated list to the +‘‘lzw’’ option; e.g. −c +lzw:2 for LZW compression with horizontal +differencing.

    +
    + + + + + + + + + + + + + + +
    + +

    −f

    +    		 + +

    Specify the bit fill order to use in writing output +data. By default, tiffdither will create a new file +with the same fill order as the original. Specifying +−f lsb2msb will force data to be written with +the FillOrder tag set to LSB2MSB , +while −f msb2lsb will force data to be written +with the Fill- Order tag set to MSB2LSB +.

    +    		 +
    + +

    −t

    +    		 + +

    Set the threshold value for dithering. By default the +threshold value is 128.

    +    		 +
    + +

    NOTES

    + + + + + +
    +

    The dither algorithm is taken from the +tiffmedian(1) program (written by Paul Heckbert).

    +
    + +

    SEE ALSO

    + + + + + +
    +

    pal2rgb(1), fax2tiff(1), +tiffinfo(1), tiffcp(1), tiff2bw(1), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiffdump.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiffdump.1.html new file mode 100644 index 000000000..c37d2eebc --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiffdump.1.html @@ -0,0 +1,145 @@ + + + + + + +TIFFDUMP + + + +

    TIFFDUMP

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiffdump − print verbatim information about +TIFF files

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiffdump [ options ] name ...

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    tiffdump displays directory information from files +created according to the Tag Image File Format, Revision +6.0. The header of each TIFF file (magic +number, version, and first directory offset) is displayed, +followed by the tag contents of each directory in the file. +For each tag, the name, data type, count, and value(s) is +displayed. When the symbolic name for a tag or data type is +known, the symbolic name is displayed followed by it’s +numeric (decimal) value. Tag values are displayed enclosed +in ‘‘<>’’ characters +immediately preceded by the value of the count field. For +example, an ImageWidth tag might be displayed as +‘‘ImageWidth (256) SHORT (3) +1<800>’’.

    + +

    tiffdump is particularly useful for investigating +the contents of TIFF files that +libtiff does not understand.

    +
    + +

    OPTIONS

    + + + + + + + + +
    + +

    −h

    +    		 + +

    Force numeric data to be printed in hexadecimal rather +than the default decimal.

    +    		 +
    + + + + + +
    +

    −m items

    + + + + + +
    +

    Change the number of indirect data items that are +printed. By default, this will be 24.

    +
    + + + + + +
    +

    −o offset

    + + + + + +
    +

    Dump the contents of the IFD at the a +particular file offset. The file offset may be specified +using the usual C-style syntax; i.e. a leading +‘‘0x’’ for hexadecimal and a leading +‘‘0’’ for octal.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    tiffinfo(1), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiffgt.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiffgt.1.html new file mode 100644 index 000000000..5a04996a6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiffgt.1.html @@ -0,0 +1,551 @@ + + + + + + +TIFFGT + + + +

    TIFFGT

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiffgt − display an image stored in a +TIFF file (Silicon Graphics version)

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiffgt [ options ] input.tif ...

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    tiffgt displays one or more images stored using +the Tag Image File Format, Revision 6.0. Each image is +placed in a fixed size window that the user must position on +the display (unless configured otherwise through X +defaults). If the display has fewer than 24 bitplanes, or if +the image does not warrant full color, then +RGB color values are mapped to the closest +values that exist in the colormap (this is done using the +rgbi routine found in the graphics utility library +−lgutil.)

    + +

    tiffgt correctly handles files with any of the +following characteristics:

    + + + + + + + + + + + + + + + + + + + + + + +
    + +

    BitsPerSample

    +    		 + +

    1, 2, 4, 8, 16

    +
    + +

    SamplesPerPixel

    +    		 + +

    1, 3, 4 (the 4th sample is ignored)

    +
    + +

    PhotometricInterpretation

    +    		 + +

    0 (min-is-white), 1 (min-is-black), 2 (RGB), 3 +(palette), 6 (YCbCr)

    +
    + +

    PlanarConfiguration

    +    		 + +

    1 (contiguous), 2 (separate)

    +
    + +

    Orientation

    +    		 + +

    1 (top-left), 4 (bottom-left)

    +
    + + + + + +
    +

    Data may be organized as strips or tiles and may be +compressed with any of the compression algorithms supported +by the libtiff(3) library.

    + +

    For palette images (PhotometricInterpretation=3), +tiffgt inspects the colormap values and assumes +either 16-bit or 8-bit values according to the maximum +value. That is, if no colormap entry greater than 255 is +found, tiffgt assumes the colormap has only 8-bit +values; otherwise it assumes 16-bit values. This inspection +is done to handle old images written by previous (incorrect) +versions of libtiff.

    + +

    tiffgt can be used to display multiple images +one-at-a-time. The left mouse button switches the display to +the first image in the next file in the list of files +specified on the command line. The right mouse button +switches to the first image in the previous file in +the list. The middle mouse button causes the first image in +the first file specified on the command line to be +displayed. In addition the following keyboard commands are +recognized:

    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    b

    +    		 + +

    Use a PhotometricInterpretation of MinIsBlack in +displaying the current image.

    +    		 +
    + +

    l

    +    		 + +

    Use a FillOrder of lsb-to-msb in decoding the +current image.

    +    		 +
    + +

    m

    +    		 + +

    Use a FillOrder of msb-to-lsb in decoding the +current image.

    +    		 +
    + +

    c

    +    		 + +

    Use a colormap visual to display the current image.

    +    		 +
    + +

    r

    +    		 + +

    Use a true color (24-bit RGB) visual to display the +current image.

    +    		 +
    + +

    w

    +    		 + +

    Use a PhotometricInterpretation of MinIsWhite in +displaying the current image.

    +    		 +
    + +

    W

    +    		 + +

    Toggle (enable/disable) display of warning messages from +the TIFF library when decoding images.

    +    		 +
    + +

    E

    +    		 + +

    Toggle (enable/disable) display of error messages from +the TIFF library when decoding images.

    +    		 +
    + +

    z

    +    		 + +

    Reset all parameters to their default settings +(FillOrder, PhotometricInterpretation, +handling of warnings and errors).

    +    		 +
    + +

    PageUp

    +    		 + +

    Display the previous image in the current file or the +last image in the previous file.

    +    		 +
    + + + + + +
    +

    PageDown

    + + + + + +
    +

    Display the next image in the current file or the first +image in the next file.

    +
    + + + + + + + + + + + + + + +
    + +

    Home

    +    		 + +

    Display the first image in the current file.

    +    		 +
    + +

    End

    +    		 + +

    Display the last image in the current file +(unimplemented).

    +    		 +
    + +

    OPTIONS

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −c

    +    		 + +

    Force image display in a colormap window.

    +    		 +
    + +

    −d

    +    		 + +

    Specify an image to display by directory number. By +default the first image in the file is displayed. +Directories are numbered starting at zero.

    +    		 +
    + +

    −e

    +    		 + +

    Enable reporting of error messages from the +TIFF library. By default tiffgt +silently ignores images that cannot be read.

    +    		 +
    + +

    −f

    +    		 + +

    Force tiffgt to run as a foreground process. By +default tiffgt will place itself in the background +once it has opened the requested image file.

    +    		 +
    + +

    −l

    +    		 + +

    Force the presumed bit ordering to be LSB +to MSB.

    +    		 +
    + +

    −m

    +    		 + +

    Force the presumed bit ordering to be MSB +to LSB.

    +    		 +
    + +

    −o

    +    		 + +

    Specify an image to display by directory offset. By +default the first image in the file is displayed. +Directories offsets may be specified using C-style syntax; +i.e. a leading ‘‘0x’’ for +hexadecimal and a leading ‘‘0’’ for +octal.

    +    		 +
    + +

    −p

    +    		 + +

    Override the value of the +PhotometricInterpretation tag; the parameter may be +one of: miniswhite, minisblack, rgb, +palette, mask, separated, ycbcr, +and cielab.

    +    		 +
    + +

    −r

    +    		 + +

    Force image display in a full color window.

    +    		 +
    + +

    −s

    +    		 + +

    Stop on the first read error. By default all errors in +the input data are ignored and tiffgt does it’s +best to display as much of an image as possible.

    +    		 +
    + +

    −w

    +    		 + +

    Enable reporting of warning messages from the +TIFF library. By default tiffgt +ignores warning messages generated when reading an +image.

    +    		 +
    + +

    −v

    +    		 + +

    Place information in the title bar describing what type +of window (full color or colormap) is being used, the name +of the input file, and the directory index of the image (if +non-zero). By default, the window type is not shown in the +title bar.

    +    		 +
    + +

    BUGS

    + + + + + +
    +

    Images wider and taller than the display are silently +truncated to avoid crashing old versions of the window +manager.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    tiffdump(1), tiffinfo(1), tiffcp(1), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiffinfo.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiffinfo.1.html new file mode 100644 index 000000000..d3a013ce7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiffinfo.1.html @@ -0,0 +1,196 @@ + + + + + + +TIFFINFO + + + +

    TIFFINFO

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiffinfo − print information about +TIFF files

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiffinfo [ options ] input.tif +...

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Tiffinfo displays information about files created +according to the Tag Image File Format, Revision 6.0. By +default, the contents of each TIFF directory +in each file is displayed, with the value of each tag shown +symbolically (where sensible).

    +
    + +

    OPTIONS

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +

    −c

    +    		 + +

    Display the colormap and color/gray response curves, if +present.

    +    		 +
    + +

    −D

    +    		 + +

    In addition to displaying the directory tags, read and +decompress all the data in each image (but not display +it).

    +    		 +
    + +

    −d

    +    		 + +

    In addition to displaying the directory tags, print each +byte of decompressed data in hexadecimal.

    +    		 +
    + +

    −j

    +    		 + +

    Display any JPEG -related tags that are +present.

    +    		 +
    + +

    −o

    +    		 + +

    Set the initial TIFF directory according +to the specified file offset. The file offset may be +specified using the usual C-style syntax; i.e. a leading +‘‘0x’’ for hexadecimal and a leading +‘‘0’’ for octal.

    +    		 +
    + +

    −s

    +    		 + +

    Display the offsets and byte counts for each data strip +in a directory.

    +    		 +
    + +

    −z

    +    		 + +

    Enable strip chopping when reading image data.

    +    		 +
    + +

    −#

    +    		 + +

    Set the initial TIFF directory to +#.

    +    		 +
    + +

    SEE ALSO

    + + + + + +
    +

    pal2rgb(1), tiffcp(1), tiffcmp(1), +tiffmedian(1), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiffmedian.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiffmedian.1.html new file mode 100644 index 000000000..78310511c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiffmedian.1.html @@ -0,0 +1,183 @@ + + + + + + +TIFFMEDIAN + + + +

    TIFFMEDIAN

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +NOTES
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiffmedian − apply the median cut algorithm to data +in a TIFF file

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiffmedian [ options ] input.tif +output.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    tiffmedian applies the median cut algorithm to an +RGB image in input.tif to generate a +palette image that is written to output.tif. The +generated colormap has, by default, 256 entries. The image +data is quantized by mapping each pixel to the closest color +values in the colormap.

    +
    + +

    OPTIONS

    + + + + + + + + +
    + +

    −c

    +    		 + +

    Specify the compression to use for data written to the +output file: none for no compression, packbits +for PackBits compression, lzw for Lempel-Ziv & +Welch compression, and zip for Deflate compression. +By default tiffmedian will compress data according to +the value of the Compression tag found in the source +file.

    +    		 +
    + + + + + +
    +

    LZW compression can be specified together +with a predictor value. A predictor value of 2 causes +each scanline of the output image to undergo horizontal +differencing before it is encoded; a value of 1 forces each +scanline to be encoded without differencing. LZW-specific +options are specified by appending a +‘‘:’’-separated list to the +‘‘lzw’’ option; e.g. −c +lzw:2 for LZW compression with horizontal +differencing.

    +
    + + + + + + + + + + + + + + + + + + + + +
    + +

    −C

    +    		 + +

    Specify the number of entries to use in the generated +colormap. By default all 256 entries/colors are used.

    +    		 +
    + +

    −f

    +    		 + +

    Apply Floyd-Steinberg dithering before selecting a +colormap entry.

    +    		 +
    + +

    −r

    +    		 + +

    Specify the number of rows (scanlines) in each strip of +data written to the output file. By default, +tiffmedian attempts to set the rows/strip that no +more than 8 kilobytes of data appear in a strip.

    +    		 +
    + +

    NOTES

    + + + + + +
    +

    This program is derived from Paul Heckbert’s +median program.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    pal2rgb(1), tiffinfo(1), tiffcp(1), +tiffcmp(1), libtiff(3TIFF)

    + +

    Color Image Quantization for Frame Buffer Display, +Paul Heckbert, SIGGRAPH proceedings, 1982, pp. 297-307.

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiffset.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiffset.1.html new file mode 100644 index 000000000..7192d6e96 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiffset.1.html @@ -0,0 +1,176 @@ + + + + + + +TIFFSET + + + +

    TIFFSET

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +EXAMPLES
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiffset − set a field in a TIFF +header

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiffset [ options ] filename.tif

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    Tiffset sets the value of a TIFF +header to a specified value.

    +
    + +

    OPTIONS

    + + + + + +
    +

    −s tagnumber [ count ] +value ...

    + + + + + +
    +

    Set the value of the named tag to the value or values +specified.

    +
    + + + + + +
    +

    −sf tagnumber filename

    + + + + + +
    +

    Set the value of the tag to the contents of filename. +This option is supported for ASCII tags only.

    +
    + +

    EXAMPLES

    + + + + + +
    +

    The following example sets the image description tag +(270) of a.tif to the contents of the file descrip:

    + + + + + +
    +
    tiffset −sf 270 descrip a.tif
+
    +
    + + + + + + +
    +

    The following example sets the artist tag (315) of a.tif +to the string +‘‘Anonymous’’:

    + + + + + +
    +
    tiffset −s 305 Anonymous a.tif
+
    +
    + + + + + + +
    +

    This example sets the resolution of the file a.tif to 300 +dpi:

    + + + + + +
    +
    tiffset −s 296 2 a.tif
+tiffset −s 282 300.0 a.tif
+tiffset −s 283 300.0 a.tif
+
    +
    + +

    SEE ALSO

    + + + + + + +
    +

    tiffdump(1), tiffinfo(1), tiffcp(1), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiffsplit.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiffsplit.1.html new file mode 100644 index 000000000..4de5c812e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiffsplit.1.html @@ -0,0 +1,102 @@ + + + + + + +TIFFSPLIT + + + +

    TIFFSPLIT

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiffsplit − split a multi-image TIFF +into single-image TIFF files

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiffsplit src.tif [ prefix ]

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    tiffsplit takes a multi-directory (page) +TIFF file and creates one or more +single-directory (page) TIFF files from it. +The output files are given names created by concatenating a +prefix, a lexically ordered suffix in the range +[aaa-zzz], the suffix .tif (e.g. +xaaa.tif, xaab.tif, xzzz.tif). If a +prefix is not specified on the command line, the default +prefix of x is used.

    +
    + +

    OPTIONS

    + + + + + +
    +

    None.

    +
    + +

    BUGS

    + + + + + +
    +

    Only a select set of ‘‘known +tags’’ is copied when splitting.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    tiffcp(1), tiffinfo(1), +libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/man/tiffsv.1.html b/src/SDL2/external/tiff-4.0.3/html/man/tiffsv.1.html new file mode 100644 index 000000000..f9921a484 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/man/tiffsv.1.html @@ -0,0 +1,207 @@ + + + + + + +TIFFSV + + + +

    TIFFSV

    +NAME
    +SYNOPSIS
    +DESCRIPTION
    +OPTIONS
    +NOTE
    +BUGS
    +SEE ALSO
    + +
    + +

    NAME

    + + + + + +
    +

    tiffsv − save an image from the framebuffer in a +TIFF file (Silicon Graphics version)

    +
    + +

    SYNOPSIS

    + + + + + +
    +

    tiffsv [ options ] output.tif [ +x1 x2 y1 y2 ]

    +
    + +

    DESCRIPTION

    + + + + + +
    +

    tiffsv saves all or part of the framebuffer in a +file using the Tag Image File Format, Revision 6.0. By +default, the image is saved with data samples packed +(PlanarConfiguration=1), compressed with the +Lempel-Ziv & Welch algorithm (Compression=5), and +with each strip no more than 8 kilobytes. These +characteristics can be overridden, or explicitly specified +with the options described below.

    +
    + +

    OPTIONS

    + + + + + + + + + + + + + + +
    + +

    −b

    +    		 + +

    Save the image as a greyscale image as if it were +processed by tiff2bw(1). This option is included for +compatibility with the standard scrsave(6D) +program.

    +    		 +
    + +

    −c

    +    		 + +

    Specify the compression to use for data written to the +output file: none for no compression, packbits +for PackBits compression, jpeg for baseline JPEG +compression, zip for Deflate compression, and +lzw for Lempel-Ziv & Welch compression +(default).

    +    		 +
    + + + + + +
    +

    LZW compression can be specified together +with a predictor value. A predictor value of 2 causes +each scanline of the output image to undergo horizontal +differencing before it is encoded; a value of 1 forces each +scanline to be encoded without differencing. LZW-specific +options are specified by appending a +‘‘:’’-separated list to the +‘‘lzw’’ option; e.g. −c +lzw:2 for LZW compression with horizontal +differencing.

    +
    + + + + + + + + + + + + + + +
    + +

    −p

    +    		 + +

    Specify the planar configuration to use in writing image +data. By default, tiffsv will create a new file with +the data samples packed contiguously. Specifying −p +contig will force data to be written with multi-sample +data packed together, while −p separate will +force samples to be written in separate planes.

    +    		 +
    + +

    −r

    +    		 + +

    Specify the number of rows (scanlines) in each strip of +data written to the output file. By default, tiffsv +attempts to set the rows/strip that no more than 8 kilobytes +of data appear in a strip.

    +    		 +
    + +

    NOTE

    + + + + + +
    +

    Except for the use of TIFF, this program +is equivalent to the standard scrsave program. This +means, for example, that you can use it in conjunction with +the standard icut program simply by creating a link +called scrsave, or by creating a shell script called +scrsave that invokes tiffgt with the +appropriate options.

    +
    + +

    BUGS

    + + + + + +
    +

    If data are saved compressed and in separate planes, then +the rows in each strip is silently set to one to avoid +limitations in the libtiff(3TIFF) library.

    +
    + +

    SEE ALSO

    + + + + + +
    +

    scrsave(6D) pal2rgb(1), tiffdump(1), +tiffgt(1), tiffinfo(1), tiffcp(1), +tiffmedian(1), libtiff(3TIFF)

    + +

    Libtiff library home page: +http://www.remotesensing.org/libtiff/

    +
    +
    + + diff --git a/src/SDL2/external/tiff-4.0.3/html/misc.html b/src/SDL2/external/tiff-4.0.3/html/misc.html new file mode 100644 index 000000000..aed91a921 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/misc.html @@ -0,0 +1,116 @@ + + + +Acknowledgments and Other Issues + + + + +

    + +Acknowledgments and Other Issues +

    + +

    +Silicon Graphics has seen fit to allow us to give this work away. It +is free. There is no support or guarantee of any sort as to its +operations, correctness, or whatever. If you do anything useful with +all or parts of it you need to honor the copyright notices. It would +also be nice to be acknowledged.

    + +
    + +

    Acknowledgements

    + +The libtiff software was written by Sam Leffler while working for +Silicon Graphics.

    + +The LZW algorithm is derived from the compress program (the proper attribution +is included in the source code). The Group 3 fax stuff originated as code +from Jef Poskanzer, but has since been rewritten several times. The latest +version uses an algorithm from Frank Cringle -- consult +libtiff/mkg3states.c and libtiff/tif_fax3.h for further +information. The JPEG support was written by Tom Lane and is dependent on the +excellent work of Tom Lane and the Independent JPEG Group (IJG) who distribute +their work under friendly licensing similar to this software. Joris Van Damme +implemented the robust Old JPEG decoder (as included in libtiff since version +3.9.0, there was another Old JPEG module in older releases, which was +incomplete and unsuitable for many existing images of that format). JBIG +module was written by Lee Howard and depends on JBIG library from the Markus +Kuhn. Many other people have by now helped with bug fixes and code; a few of +the more persistent contributors have been: + +

    +    Bjorn P. Brox
+    Dan McCoy
+    J.T. Conklin                
+    Richard Minner
+    Frank D. Cringle        
+    Richard Mlynarik
+    Soren Pingel Dalsgaard  
+    Niles Ritter
+    Steve Johnson           
+    Karsten Spang
+    Tom Lane               
+    Peter Smith
+    Brent Roman            
+    Mike Welles
+    Frank Warmerdam
+    Greg Ward
+    Stanislav Brabec        
+    Roman Shpount
+    Peter Skarpetis        
+    Arvan Pritchard
+    Bernt Herd             
+    Joseph Orost
+    Phil Beffery           
+    Ivo Penzar
+    Francois Dagand        
+    Albert Chin-A-Young
+    Bruce A. Mallett
+    Dwight Kelly
+    Andrey Kiselev
+    Ross Finlayson
+    Dmitry V. Levin
+    Bob Friesenhahn
+    Lee Howard
+    Joris Van Damme
+    Tavis Ormandy
+    Richard Nolde
+
    + +(my apology to anyone that was inadvertently not listed.) + +

    Use and Copyright

    + +

    +Copyright (c) 1988-1997 Sam Leffler
+Copyright (c) 1991-1997 Silicon Graphics, Inc.
+
+Permission to use, copy, modify, distribute, and sell this software and 
+its documentation for any purpose is hereby granted without fee, provided
+that (i) the above copyright notices and this permission notice appear in
+all copies of the software and related documentation, and (ii) the names of
+Sam Leffler and Silicon Graphics may not be used in any advertising or
+publicity relating to the software without the specific, prior written
+permission of Sam Leffler and Silicon Graphics.
+
+THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
+EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
+WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
+
+IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
+ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
+OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
+LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
+OF THIS SOFTWARE.
+
    + +

    +

    + + +Last updated: $Date: 2007/02/24 15:47:04 $ + + diff --git a/src/SDL2/external/tiff-4.0.3/html/support.html b/src/SDL2/external/tiff-4.0.3/html/support.html new file mode 100644 index 000000000..f6f5d6087 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/support.html @@ -0,0 +1,655 @@ + + + + TIFF 6.0 Specification Coverage + + + + + + + + + + +
    +

    TIFF 6.0 Specification Coverage

    +

    + The library is capable of dealing with images that are written to + follow the 5.0 or 6.0 TIFF spec. There is also considerable support + for some of the more esoteric portions of the 6.0 TIFF spec. +

    +
    +
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    Core requirements +

    + Both "MM" and "II" byte orders are handled. + Both packed and separated planar configuration of samples. + Any number of samples per pixel (memory permitting). + Any image width and height (memory permitting). + Multiple subfiles can be read and written. + Editing is not supported in that related subfiles (e.g. + a reduced resolution version of an image) are not automatically + updated. +

    +

    + Tags handled: ExtraSamples, ImageWidth, + ImageLength, NewSubfileType, ResolutionUnit. + Rowsperstrip, StripOffsets, StripByteCounts, + XResolution, YResolution +

    +
    Tiled ImagesTileWidth, TileLength, TileOffsets, + TileByteCounts
    Image Colorimetry InformationWhitePoint, PrimaryChromaticities, TransferFunction, + ReferenceBlackWhite
    Class B for bilevel imagesSamplesPerPixel = 1
    + BitsPerSample = 1
    + Compression = 1 (none), 2 (CCITT 1D), or 32773 (PackBits)
    + PhotometricInterpretation = 0 (Min-is-White), 1 (Min-is-Black)
    Class G for grayscale imagesSamplesPerPixel = 1
    + BitsPerSample = 4, 8
    + Compression = 1 (none) 5 (LZW)
    + PhotometricInterpretation = 0 (Min-is-White), 1 (Min-is-Black)
    Class P for palette color imagesSamplesPerPixel = 1
    + BitsPerSample = 1-8
    + Compression = 1 (none) 5 (LZW)
    + PhotometricInterpretation = 3 (Palette RGB)
    + ColorMap
    Class R for RGB full color imagesSamplesPerPixel = 3
    + BitsPerSample = <8,8,8>
    + PlanarConfiguration = 1, 2
    + Compression = 1 (none) 5 (LZW)
    + PhotometricInterpretation = 2 (RGB)
    Class F for facsimile(Class B tags plus...)
    + Compression = 3 (CCITT Group 3), 4 (CCITT Group 4)
    + FillOrder = 1 (MSB), 2 (LSB)
    + Group3Options = 1 (2d encoding), 4 (zero fill), 5 (2d+fill)
    + ImageWidth = 1728, 2048, 2482
    + NewSubFileType = 2
    + ResolutionUnit = 2 (Inch), 3 (Centimeter)
    + PageNumber, + XResolution, + YResolution, + Software, + BadFaxLines, + CleanFaxData, + ConsecutiveBadFaxLines, + DateTime, + DocumentName, + ImageDescription, + Orientation
    Class S for separated imagesSamplesPerPixel = 4
    + PlanarConfiguration = 1, 2
    + Compression = 1 (none), 5 (LZW)
    + PhotometricInterpretation = 5 (Separated)
    + InkSet = 1 (CMYK)
    + DotRange, + InkNames, + DotRange, + TargetPrinter
    Class Y for YCbCr imagesSamplesPerPixel = 3
    + BitsPerSample = <8,8,8>
    + PlanarConfiguration = 1, 2
    + Compression = 1 (none), 5 (LZW), 7 (JPEG)
    + PhotometricInterpretation = 6 (YCbCr)
    + YCbCrCoefficients, + YCbCrSubsampling, + YCbCrPositioning
    + (colorimetry info from Appendix H; see above)
    Class "JPEG" for JPEG images (per TTN2)PhotometricInterpretation = 1 (grayscale), 2 (RGB), 5 (CMYK), 6 (YCbCr)
    + (Class Y tags if YCbCr)
    + (Class S tags if CMYK)
    + Compression = 7 (JPEG)
    +

    + In addition, the library supports some optional compression algorithms + that are, in some cases, of dubious value. +

    + + + + + + + + +
    Compression tag valueCompression algorithm
    32766NeXT 2-bit encoding
    32809ThunderScan 4-bit encoding
    32909Pixar companded 11-bit ZIP encoding
    32946PKZIP-style Deflate encoding (experimental)
    34676SGI 32-bit Log Luminance encoding (experimental)
    34677SGI 24-bit Log Luminance encoding (experimental)
    +
    +

    + Note that there is no support for the JPEG-related tags defined + in the 6.0 specification; the JPEG support is based on the post-6.0 + proposal given in TIFF Technical Note #2. +

    + + + + + +
    For more information on the experimental Log Luminance encoding + consult the materials available at + http://www.anyhere.com/gward/pixformat/tiffluv.html.
    +
    +

    + The following table shows the tags that are recognized + and how they are used by the library. If no use is indicated, + then the library reads and writes the tag, but does not use it internally. +

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    Tag NameValueR/WLibrary's Use (Comments)
    NewSubFileType254R/Wnone (called SubFileType in <tiff.h>)
    SubFileType255R/Wnone (called OSubFileType in <tiff.h>)
    ImageWidth256R/Wlots
    ImageLength257R/Wlots
    BitsPerSample258R/Wlots
    Compression259R/Wto select appropriate codec
    PhotometricInterpretation262R/Wlots
    Thresholding263R/W 
    CellWidth264 parsed but ignored
    CellLength265 parsed but ignored
    FillOrder266R/Wcontrol bit order
    DocumentName269R/W 
    ImageDescription270R/W 
    Make271R/W 
    Model272R/W 
    StripOffsets273R/Wdata i/o
    Orientation274R/W 
    SamplesPerPixel277R/Wlots
    RowsPerStrip278R/Wdata i/o
    StripByteCounts279R/Wdata i/o
    MinSampleValue280R/W 
    MaxSampleValue281R/W 
    XResolution282R/W 
    YResolution283R/Wused by Group 3 2d encoder
    PlanarConfiguration284R/Wdata i/o
    PageName285R/W 
    XPosition286R/W 
    YPosition286R/W 
    FreeOffsets288 parsed but ignored
    FreeByteCounts289 parsed but ignored
    GrayResponseUnit290 parsed but ignored
    GrayResponseCurve291 parsed but ignored
    Group3Options292R/Wused by Group 3 codec
    Group4Options293R/W 
    ResolutionUnit296R/Wused by Group 3 2d encoder
    PageNumber297R/W 
    ColorResponseUnit300 parsed but ignored
    TransferFunction301R/W 
    Software305R/W 
    DateTime306R/W 
    Artist315R/W 
    HostComputer316R/W 
    Predictor317R/Wused by LZW codec
    WhitePoint318R/W 
    PrimaryChromacities319R/W 
    ColorMap320R/W 
    TileWidth322R/Wdata i/o
    TileLength323R/Wdata i/o
    TileOffsets324R/Wdata i/o
    TileByteCounts324R/Wdata i/o
    BadFaxLines326R/W 
    CleanFaxData327R/W 
    ConsecutiveBadFaxLines328R/W 
    SubIFD330R/Wsubimage descriptor support
    InkSet332R/W 
    InkNames333R/W 
    DotRange336R/W 
    TargetPrinter337R/W 
    ExtraSamples338R/Wlots
    SampleFormat339R/W 
    SMinSampleValue340R/W 
    SMaxSampleValue341R/W 
    JPEGTables347R/Wused by JPEG codec
    YCbCrCoefficients529R/Wused by TIFFReadRGBAImage support
    YCbCrSubsampling530R/Wtile/strip size calculations
    YCbCrPositioning531R/W 
    ReferenceBlackWhite532R/W 
    Matteing32995Rnone (obsoleted by ExtraSamples tag)
    DataType32996Rnone (obsoleted by SampleFormat tag)
    ImageDepth32997R/Wtile/strip calculations
    TileDepth32998R/Wtile/strip calculations
    StoNits37439R/W 
    +

    + The Matteing and DataType + tags have been obsoleted by the 6.0 + ExtraSamples and SampleFormat tags. + Consult the documentation on the + ExtraSamples tag and Associated Alpha for elaboration. Note however + that if you use Associated Alpha, you are expected to save data that is + pre-multipled by Alpha. If this means nothing to you, check out + Porter & Duff's paper in the '84 SIGGRAPH proceedings: "Compositing Digital + Images". +

    +

    + The ImageDepth + tag is a non-standard, but registered tag that specifies + the Z-dimension of volumetric data. The combination of ImageWidth, + ImageLength, and ImageDepth, + defines a 3D volume of pixels that are + further specified by BitsPerSample and + SamplesPerPixel. The TileDepth + tag (also non-standard, but registered) can be used to specified a + subvolume "tiling" of a volume of data. +

    +

    + The Colorimetry, and CMYK tags are additions that appear in TIFF 6.0. + Consult the TIFF 6.0 specification included in the doc directory + and online. +

    +

    + The JPEG-related tag is specified in + TIFF Technical Note #2 which defines + a revised JPEG-in-TIFF scheme (revised over that appendix that was + part of the TIFF 6.0 specification). +

    +
    +

    + Last updated: $Date: 2005/12/28 06:53:18 $ +

    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/tools.html b/src/SDL2/external/tiff-4.0.3/html/tools.html new file mode 100644 index 000000000..65e9c0dd8 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/tools.html @@ -0,0 +1,164 @@ + + + + +TIFF Tools Overview + + +

    TIFF +Tools Overview

    +

    This software distribution comes with a small collection of +programs for converting non-TIFF format images to TIFF and for +manipulating and interrogating the contents of TIFF images. Several +of these tools are useful in their own right. Many of them however +are more intended to serve as programming examples for using the +TIFF library.

    +

    Device-dependent Programs

    +There are two device-dependent programs that serve as simple +examples for writing programs to display and save TIFF images. + + + + + + + + + +
    +tiffgt    Display the contents of one or more TIFF images using OpenGL. +The software makes extensive use of the TIFFRGBAImage +facilities described elsewhere.
    tiffsvA program to save all or part of a screen dump on a Silicon +Graphics system. As for tiffgt this code, while written to +use the IRIS GL, can be easily tailored to other devices.
    +

    Device-independent Programs

    +The remaining programs should be device-independent: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    bmp2tiffConvert BMP images to TIFF
    fax2psConvert a Group 3- or Group 4- compressed TIFF to PostScript +that is significantly more compressed than is generated by +tiff2ps (unless tiff2ps writes PS Level II)
    fax2tiffConvert raw Group 3 or Group 4 facsimile data to TIFF
    gif2tiffA quick hack that converts GIF 87a (old) format images to TIFF
    pal2rgbConvert a Palette-style image to a full color RGB image by +applying the colormap
    ppm2tiffA quick hack that converts 8-bit PPM format images to TIFF
    ras2tiffA quick hack that converts Sun rasterfile format images to TIFF +-- it's less than complete
    raw2tiffCreate a TIFF file from raw data
    rgb2ycbcrConvert an RGB, grayscale, or bilevel TIFF image to a YCbCr +TIFF image; it's mainly provided for testing
    sgi2tiffA program to convert SGI image files to TIFF. This program is +only useful on SGI machines as it uses -limage.
    thumbnailCopy a bilevel TIFF to one that includes 8-bit greyscale +"thumbnail images" for each page; it is provided as an example of +how one might use the SubIFD tag (and the library support +for it)
    tiff2bwA simple program to convert a color image to grayscale
    tiff2pdfConvert TIFF images to PDF
    tiff2psConvert TIFF images to PostScript
    tiff2rgbaConvert a TIFF image to RGBA color space
    tiffcmpCompare the contents of two TIFF files (it does not check all +the directory information, but does check all the data)
    tiffcpCopy, concatenate, and convert TIFF images (e.g. switching from +Compression=5 to Compression=1)
    tiffcropProvides selection of images from within one or more multi-image +TIFF files, with orthogonal rotation, mirroring, cropping, and +extraction of multiple sections and exporting to one or more files. +It extends the functionality of tiffcp to support additional bit +depths in strips and tiles and enhances the selection capabilities of +tiffsplit. Bilevel images can be inverted and images may be split into +segments to fit on multiple /pages/ (standard paper sizes), plus other +functions described in the tiffcrop man page
    tiffditherDither a b&w image into a bilevel image (suitable for use +in creating fax files)
    tiffdumpDisplay the verbatim contents of the TIFF directory in a file +(it's very useful for debugging bogus files that you may get from +someone that claims they support TIFF)
    tiffinfoDisplay information about one or more TIFF files.
    tiffmedianA version of Paul Heckbert's median cut program that reads an +RGB TIFF image, and creates a TIFF palette file as a result
    tiffsetSet a field in a TIFF header
    tiffsplitCreate one or more single-image files from a (possibly) +multi-image file
    +

    Check out the manual pages for details about the above +programs.

    +
    +Last updated: $Date: 2009-10-28 22:13:37 $ + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta007.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta007.html new file mode 100644 index 000000000..c535d2708 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta007.html @@ -0,0 +1,112 @@ + + + +Changes in TIFF v3.4beta007 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • bit order was corrected for Pentium systems +
    • a new define, HOST_BIGENDIAN, was added for code that + wants to statically use information about native cpu byte order +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • the G3/G4 decoder was replaced by a new one that is faster and + has smaller state tables +
    • Niles Ritter's client tag extension hooks were added +
    • a new routine TIFFCurrentDirOffset was added for + applications that want to find out the file offset of a TIFF directory +
    • the calculation of the number of strips in an image was corected + for images with certain esoteric configurations +
    • a potential memory leak (very unlikely) was plugged +
    • the TIFFReadRGBAImage support was completely rewritten + and new, more flexible support was added for reading images into + a fixed-format raster +
    • YCbCr to RGB conversion done in the TIFFReadRGBAImage support + was optimized +
    • a bug in JPEG support calculation of strip size was corrected +
    • the LZW decoder was changed to initialize the code table to zero + to lessen potential problems that arise when invalid data is decoded +
    • tiffcomp.h is now aware of OS/2 +
    • some function prototypes in tiffio.h and tiffiop.h + that contained parameter + names have been changed to avoid complaints from certain compilers +
    + +

    + +CHANGES IN THE PORTABILITY SUPPORT: + +
      +
    • Makefile.in has been corrected to use the parameters + chosen by the configure script +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • fax2ps has been rewritten and moved over from the user + contributed software +
    • an uninitialized variable in pal2rgb has been fixed +
    • ras2tiff now converts 24-bit RGB raster data so that + samples are written in the proper order +
    • tiff2ps has been updated to include fixes + and enhancements from Alberto Accomazzi +
    • tiffcp now has a -o option to select a directory + by file offset +
    • tiffinfo is now capable of displaying the raw undecoded + image data in a file +
    • tiffgt has been rewritten to use the new TIFFRGBAImage + support and to handle multiple files +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta016.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta016.html new file mode 100644 index 000000000..22f185f54 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta016.html @@ -0,0 +1,122 @@ + + + +Changes in TIFF v3.4beta016 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • support was added for configuring the Deflate codec +
    • support was added for the HTML documentation +
    • codecs that are not configured for inclusion in the library + are no longer compiled +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • support was added for registering new codecs external to the library + and for overriding the codecs that are builtin to the library +
    • emulation support for the old DataType tag was improved +
    • suppport was added for the SMinSampleValue + and SMaxSampleValue tags +
    • the library no longer ignores TileWidth and TileLength + tags whose values are not a multiple of 16 (per the spec); this + permits old, improperly written, images to be read +
    • the support for the Predictor tag was placed in a reusable + module so that it can be shared by multiple codecs +
    • experimental compression support was added for the Deflate algorithm + (using the freely available zlib package) +
    • a new routine, TIFFWriteBufferSetup was added a la the + routine TIFFReadBufferSetup +
    • the DSO version of the library is now statically linked with the + JPEG and Deflate libraries; this means applications that link against + the DSO do not also need to link against these ancillary libraries +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • all the tools now use common code to process compress-oriented arguments +
    • tiffdump should now compile on a Macintosh with MPW +
    + +

    + +CHANGES IN THE MANUAL PAGES: + +
      +
    • everything was updated +
    + +

    + +CHANGES IN THE DOCUMENTATION: + +
      +
    • everything was updated +
    + +

    + +CHANGES IN CONTRIBUTED SOFTWARE: + +
      +
    • contrib/dbs/xtiff was made to compile +
    • contrib/mac-mpw is new support for compiling the software on + a Macintosh under MPW; consult the documentation + for details +
    • contrib/tags is information on how to use the tag extenion + facilities; consult + contrib/tags/README for details +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta018.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta018.html new file mode 100644 index 000000000..ac1877fae --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta018.html @@ -0,0 +1,84 @@ + + + +Changes in TIFF v3.4beta018 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • configure now recognizes IRIX 6.x systems +
    • configure now uses ENVOPTS when searching for an ANSI + C compiler; this fixes a problem configuring the software under + HP/UX with the native C compiler +
    • configure now correctly recognizes memory-mapped files are supported + under AIX +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • make install now properly installs the include files +
    • some portability fixes from Bjorn Brox +
    • the G3/G4 codec now warns about decoded rows that are longer than + the image/tile width +
    • changes from Frank Cringle to make the library work with the + gcc-specific bounds checking software +
    • miscellaneous fixes to TIFFPrintDirectory +
    • bug fix to correct a problem where TIFFWriteRawStrip + could not be used to automatically grow an image's length +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • fixes from Frank Cringle to update fax2tiff +
    • portability fixes to tiff2bw and tiffcmp +
    • tiffdump now uses the byte swapping routines in the library +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta024.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta024.html new file mode 100644 index 000000000..25a33478f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta024.html @@ -0,0 +1,139 @@ + + + +Changes in TIFF v3.4beta024 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • It is now possible to setup the software to build only the + library; configure reconizes this is the intent when the + VERSION, tiff.alpha, and tif_version.c + files are in the local directory (i.e. ``.'') +
    • configure no longer tries to setup HTML materials +
    • include file directories needed in building the library are now + specified with a DIRS_LIBINC config parameter +
    • configure no longer checks for alternate compilers if CC + is set; if the specified compiler is not found or is not appropriate + the configuration procedure aborts +
    • the port.h file generated by configure is now used only by + the library and as such as have been moved to the libtiff + directory +
    • there is beginning support for building DSO's on systems other than IRIX +
    • configure now verifies the JPEG and zlib directory pathnames by + checking for well-known include files in these directories +
    • configure no longer creates the dist directory needed only + on SGI machines (for building SGI binary distributions) +
    • a bug was fixed whereby configure would incorrectly set + ENVOPTS when building the software with gcc under AIX +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • two new typedefs were added to tiff.h: int8 + and uint8 for signed and unsigned 8-bit quantities, + respectively; these are currently used only by + programs in the tools directory +
    • the BadFaxLines, CleanFaxData, and + ConsecutiveBadFaxLines tags are now supported with + Group 4 compression +
    • byte order is now correctly identified on 64-bit machines +
    • a bug was fixed in the PackBits decoder where input data would + appear short when a no-op run was present +
    • a bug was fixed in calculations with very wide strips +
    • TIFFWriteEncodedStrip and TIFFWriteRawStrip + were extended to support dynamically growing the number of + strips in an image (must set ImageLength prior to + making calls though) +
    • TIFFDefaultTileSize now rounds tile width and height + up to a multiple of 16 pixels, as required by the TIFF 6.0 specification +
    • the file version.h is now built by a new mkversion + program; this was done for portability to non-UNIX systems +
    • support was added for the Acorn RISC OS (from Peter Greenham) +
    • the builtin codec table is now made const when compiling + under VMS so that libtiff can be built as a shared library +
    • support for the PowerPC Mac (from Ruedi Boesch) +
    • support for Window NT/Window 95 (from Scott Wagner) +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • the tools no longer include port.h +
    • various portability fixes; mostly to eliminate implicit assumptions + about how long int32 data types are +
    • PostScript Level II additions to tiff2ps from Bjorn Brox +
    • sgi2tiff now handles RGBA images +
    + +

    + +CHANGES IN THE MANUAL PAGES: + +
      +
    • the documentation has been updated to reflect the current state of + the software +
    • some routines have been moved to different manual pages + to group like-routines together +
    + +

    + +CHANGES IN THE CONTRIBUTED SOFTWARE: + +
      +
    • support was added for the Acorn RISC OS (from Peter Greenham) +
    • support for Windows NT/Windows 95 contributed for a previous + version of this software was sort of incorporated (it's broken + right now) (from Scott Wagner) +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta028.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta028.html new file mode 100644 index 000000000..ff7ef69a2 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta028.html @@ -0,0 +1,146 @@ + + + +Changes in TIFF v3.4beta028 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • a -noninteractive flag was added to configure to + control whether or not it prints and prompts for configuration information +
    • various typos and fixes were made in configure for the the + library-only build support (this and other configure fixes from + Richard Mlynarik <mly@adoc.xerox.com>) +
    • bugs were fixed in the handling of pathnames supplied for external + packages; e.g. DIR_JPEG +
    • the handling of SETMAKE is now done properly +
    • the default prototype function declaration for pow was corrected +
    • a bug was fixed in libtiff/Makefile.in that caused installation + to fail on systems without DSO support +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • Acorn RISC O/S support that was accidentally left out of the + left out of the previous distribution is present (from Peter Greenham) +
    • complaints about unknown and/or unsupported codecs have been + delayed until they are invoked; this permits applications to open + images and look at tags even if the image data is compressed with + an unknown/unsupported compression scheme +
    • bugs in handling unknown tags have been corrected; applications + that use multiple codecs, each with codec-specific tags, no longer + generate confusing error messages +
    • a missing pseudo-tag definition in the CCITT G3 codec was fixed + (this problem caused core dumps in the tiffcp program) +
    • pseudo-tags are now treated specially; they are always considered + to be set (i.e. they do not use bits in the FIELD_* bit-vectors). +
    • the use of strip chopping can now be controlled on a per-file basis + through a mode parameter supplied when opening a file (``C'' to + enable strip chopping and ``c'' to disable) +
    • two bugs were fixed in the writing of opposite-endian byte-order + files +
    • support was added for three new fax-related tags registered to + SGI: FaxRecvParams, FaxRecvTime, and FaxSubAddress +
    • the bit order of image data read and written can now be controlled + on a per-file basis through a mode parameter supplied when opening + a file (``B'' to force MSB2LSB bit order, ``L'' for LSB2MSB bit + order, and ``H'' for the bit order of the native CPU) +
    • the byte order of image and tag data written to newly-created files + can now be controlled on a per-file basis through a mode parameter + supplied when openening a file (``b'' to force Big-Endian byte order + and ``l'' to force Little-Endian byte order) +
    • the use memory-mapped files for images opened read-only can now + be controlled on a per-file basis through a mode parameter supplied + when opening a file (``M'' to enable use of memory-mapped files + and ``m'' to disable use) +
    • the use of the WIN32 define in tiffiop.h has + been replaced by __WIN32__ +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • fax2ps now does a save and restore + around each page of PostScript; this fixes a problem with VM + overflow when printing a many-page document on some printers +
    • a bug in the handling of 3-channel images by ras2tiff + was fixed +
    • tiffcp has new options to control the byte order of + newly created files: -B for Big-Endian byte order, -L + for Little-Endian byte order; a -M option to disable the + use of memory-mapped files, and a -C option to disable the + use of strip chopping +
    • bugs were fixed in tiffcp's handling of codec-specific tags +
    + +

    + +CHANGES IN THE MANUAL PAGES: + +
      +
    • the TIFFOpen page has been updated to reflect the new + optional open mode parameters +
    + +

    + +CHANGES IN THE CONTRIBUTED SOFTWARE: + +
      +
    • contrib/win95 contains information and code from Philippe Tenenhaus + <100423.3705@compuserve.com> + about using the software under Windows 95 +
    • contrib/winnt contains information and code from Dave Dyer + <ddyer@triple-i.com> + about using the software under Windows NT +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta029.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta029.html new file mode 100644 index 000000000..f2a3d3f6a --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta029.html @@ -0,0 +1,86 @@ + + + +Changes in TIFF v3.4beta029 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • configure now relativizes pathname references given in + -L options (as frequently specified when configuring + ancillary packages) +
    • problems related to configuring the software on Ultrix 4.4 have + been corrected +
    • the shell to use in Makefiles and scripts can now be set with the + SCRIPT_SH configuration parameter +
    • comments in config.site now correctly indicate how to setup the + use of ancillary packages +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • mods for building the software on a Mac using the + MetroWerks CodeWarrior compilers +
    • a bug in the CCITT T.4/T.6 decoder was fixed where the last codeword in + a strip/tile might not be decoded; this was seen only when decoding + multi-strip images +
    • a bug in the CCITT RLE codecs was fixed whereby the pseudo tags were not + being properly registered +
    + +

    + +CHANGES IN THE CONTRIBUTED SOFTWARE: + +
      +
    • contrib/mac-cw contains information and code from Niles Ritter + <ndr@tazboy.jpl.nasa.gov> + about building the software with the MetroWerks CodeWarrior compilers + on Macintosh systems +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta031.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta031.html new file mode 100644 index 000000000..d5b7eac4f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta031.html @@ -0,0 +1,94 @@ + + + +Changes in TIFF v3.4beta031 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • configure now captures significantly more information + in the config.log file and provides more information when + it is unable to setup a configuration +
    • support was added for building shared libraries on more systems: + AIX, HPUX, Solaris, and Linux. +
    • a new configuration parameter LIBCOPTS was added for + passing arguments to the C compiler to use when building only + the library; this is part of the enhanced support for building + shared libraries +
    • include files for optional packages that reside in /usr/include + are now handled correctly +
    • build trees may now be configured using either relative or absolute + pathnames to the source distribution +
    • several new configuration parameters were added, mainly for building + shared libraries: DIST_MAJOR, DIST_MINOR, + DIST_ALPHA, and DSOSUF_VERSION +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • the Deflate support has been revised: it requires version 0.99 of + the zlib software distribution, the output format has changed and + is incompatible with previous versions of this library (each + strip now includes a header read and written by the zlib library) +
    • the codec name printed by the TIFFPrintDirectory routine is now + taken from the codec table instead of from a builtin table; this means + that application-defined codecs are handled correctly +
    • a new symbol was added that contains the library version number; + this can be used to do a compile-time compatibility check of the + library version +
    + +

    + +CHANGES IN THE MANUAL PAGES: + +
      +
    • the creation and installation of manual pages was redone; it now + implements the documented ``configuration scheme'' +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta032.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta032.html new file mode 100644 index 000000000..bc14ef336 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta032.html @@ -0,0 +1,90 @@ + + + +Changes in TIFF v3.4beta032 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • various fixups and subtle improvements to configure + from Richard Mlynarik +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • a new codec from Pixar designed for high-resolution color images; + note that this codec is not configured by default +
    • a bug fix for reading tags with a single FLOAT value +
    • change to the TIFFGetField calling convention: + a tag that has a single value of + type DOUBLE is now retrieved by passing a + ``double*'' instead of a + ``double**'' (this change makes the handling of tags with + DOUBLE values identical to the handling of tags with + FLOAT values) +
    • fix to VMS support for the handling of floating point values +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • tiffdump now handles tags with FLOAT and DOUBLE + values +
    + +

    + +CHANGES IN THE CONTRIBUTED SOFTWARE: + +
      +
    • updates to the Acorn OS support from Peter Greenham +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta033.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta033.html new file mode 100644 index 000000000..8d8345a87 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta033.html @@ -0,0 +1,82 @@ + + + +Changes in TIFF v3.4beta033 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • support was added for building the library as a DSO under OSF/1 +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • fixes to the Pixar codec +
    • portability mods for VMS +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • fixes to gif2tiff and ppm2tiff for building under MS/DOS +
    • portability mods to fax2ps and ycbcr for VMS +
    + +

    + +CHANGES IN THE CONTRIBUTED SOFTWARE: + +
      +
    • a new package from Alexander Lehmann + for building the library and tools under MS/DOS with DJGPP v2 +
    • updated VMS support from Karsten Spang +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta034.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta034.html new file mode 100644 index 000000000..77d9863b4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta034.html @@ -0,0 +1,68 @@ + + + +Changes in TIFF v3.4beta034 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • support was added for building the library as a DSO under NetBSD +
    • a bug was fixed in the DSO support for Linux +
    • the handling of version strings has changed slightly to simplify parsing +
    • a new parameter, TIFFLIBREF, was added to control how the + library is referenced when linking programs in the tools directory +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • DSO creation under Solaris now forces the DSO name with a -h option +
    • the interface to the mkversion program was changed + to eliminate the need to parse files +
    • a bug was fixed in the EOL-detection logic of the T.4/T.6 decoder +
    • ANSI IT8 TIFF/IT tag definitions were added to tiff.h +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta035.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta035.html new file mode 100644 index 000000000..22fb2b8d0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta035.html @@ -0,0 +1,63 @@ + + + +Changes in TIFF v3.4beta035 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • support was added installing the HTML documentation +
    • support was added for building the library as a DSO under FreeBSD +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • the interface to the mkversion program was restored to + the form used prior to v3.4beta034 +
    • several portability problems for 16-bit systems were fixed +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.4beta036.html b/src/SDL2/external/tiff-4.0.3/html/v3.4beta036.html new file mode 100644 index 000000000..e36754d36 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.4beta036.html @@ -0,0 +1,117 @@ + + + +Changes in TIFF v3.4beta036 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • support was added for building the library as a DSO under HP-UX with + the native C compiler +
    • tools are now built with explicit pathnames for the DSO under IRIX, + Solaris, and Linux +
    • DSO configuration support for Linux was changed to require that + libc.so only be readable (not executable) +
    + +

    + +CHANGES IN LIBTIFF: + +
      +
    • support was add for ICC: NumberOfInks, and ICCProfile +
    • a memory leak caused by doing TIFFSetDirectory(0) was fixed +
    • a bug was fixed whereby certain multi-directory files were not + properly handled when accessed by mapping the data into memory +
    • the strip chopping support is now always compiled + into the library with the default usage controlled by a + STRIPCHOP_DEFAULT configuration parameter +
    • the strip chopping support no longer chops tiled images +
    • all static strings are now const--for shared libraries +
    • the logic for estimating the strip size of images without + a StripByteCounts tag was improved by handling + PlanarContig images differently from PlanarSeparate +
    • a bug was fixed in the G3 codec when converting the Y resolution + of data specified in metric units +
    • a bug was fixed in the G3/G4 decoder for data where lines terminate + with a v0 code +
    • the TIFFRGBAImage support was changed to scale 16-bit colormap + entries more conservatively to avoid problems with applications + that do not generate fully saturated pixel values +
    • the LZW decoder was changed to use a more conservative scheme when + bounds checking the hash table array; this avoids pitfalls with + systems that load objects into memory in unusual locations +
    • a bug was fixed in TIFFPrintDirectory's handling of the + InkNames tag +
    • TIFFPrintDirectory now understands NumberOfInks + and ICC-related tags +
    • the routines for reading image data now provide more useful information + when a read error is encountered +
    • support was added for compiling with Microsoft Visual C++ 4.0 +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • a bug was fixed in pal2rgb's colormap handling +
    • tiff2ps now includes John Wehle's changes for maintaining + the aspect ratio + of images when scaling and for honoring the deadzone on a page when + generating PostScript Level II +
    • tiff2ps does a better job guarding against the mishandling + of greyscale images +
    • tiff2ps now correctly converts X- and Y-resolution values + specified in metric units +
    • tiffdump has a new -m option to control the maximum + number of indirect + data values printed for a tag (by default 24) +
    • tiffdump understands several new tags +
    • tiffdump now shows any terminating null in ASCII strings +
    • tiffinfo now suppresses strip chopping when interpreting an image; + a new -z option has been added to enable strip chopping +
    + + TIFF home page.
    + +
    + +
    +Sam Leffler / sam@engr.sgi.com +Last updated $Date: 1999/08/09 20:21:21 $. +
    + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.5.1.html b/src/SDL2/external/tiff-4.0.3/html/v3.5.1.html new file mode 100644 index 000000000..0c88de954 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.5.1.html @@ -0,0 +1,75 @@ + + + +Changes in TIFF v3.5.1 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • None of consequence +
    + +

    + +CHANGES IN LIBTIFF: + + +
      +
    • Support was added for IPTC Newsphoto metadata (TIFFTAGE_IPTCNEWSPHOTO) +
    • Support was added for photoshop caption handling (TIFFTAG_PHOTOSHOP) +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • Bill Radcliffe's iptcutil was +added to the "contrib" subdirectory . It can convert an IPTC binary +blob to ASCII text and vice-versa. The blob itself can be extracted +from or added to an image with the ImageMagick convert(1) +utility. +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2006/01/03 01:42:30 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.5.2.html b/src/SDL2/external/tiff-4.0.3/html/v3.5.2.html new file mode 100644 index 000000000..71b486a6f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.5.2.html @@ -0,0 +1,108 @@ + + + +Changes in TIFF v3.5.2 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    + +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • Corrected alpha versioning. + +
    • Removed distinction between alpha and release targets in Makefile.in. + +
    • Added release.stamp target, which tags cvs tree, and updates + "RELEASE-DATE" + +
    • Added releasediff target, which diffs tree with source as of + date in "RELEASE-DATE" + +
    • Ticked up version to 3.5.2 (alpha 01 -- but I think we'll moving + away from alpha/non-alpha distinctions). + +
    + +

    + +CHANGES IN LIBTIFF: + + +
      +
    • Added IRIX/gcc, and OSF/1 4.x support on behalf of + Albert Chin-A-Young + +
    • Added TIFFReassignTagToIgnore() API on behalf of + Bruce Cameron . Man page still pending. + +
    • pre-remove so link before softlink in LINUXdso action in + libtiff/Makefile.in to avoid failure on LINUXdso builds other than + the first. + +
    • Fixed problem with cvtcmap() in tif_getimage.c modifying the + colormaps owned by the TIFF handle itself when trying to fixup wrong + (eight bit) colormaps. Corrected by maintaining a private copy of + the colormap. + +
    • Added TIFFReadRGBATile()/TIFFReadRGBAStrip() support in + tif_getimage.c. + +
    • Applied "a" mode fix to tif_win32.c/TIFFOpen() as suggested + by Christopher Lawton + +
    • Set O_BINARY for tif_unix.c open() ... used on cygwin for instance. + +
    • Added CYGWIN case in configure. + +
    • Applied Francois Dagand's patch to handle fax decompression bug. + (sizes >= 65536 were failing) +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • Added addtiffo (add overviews to a TIFF file) in contrib. Didn't + put it in tools since part of it is in C++. +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2004/11/26 14:37:20 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.5.3.html b/src/SDL2/external/tiff-4.0.3/html/v3.5.3.html new file mode 100644 index 000000000..e7910d9b7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.5.3.html @@ -0,0 +1,132 @@ + + + +Changes in TIFF v3.5.3 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +The ChangeLog will follow, but please note the most important change: +LZW compression has been removed. +

    +Unisys has the patent on LZW compression and have been very active in +their enforcement of late, demanding payments of $5000 or more from +websites using unlicensed software to create GIF's. They could well +do the same do persons using libtiff to create LZW compressed TIFF +images. +

    +From Burn All GIF's Day: +
    +The catch is that it appears to be difficult or impossible to get a +Unisys license to use LZW in free software that complies with the Open +Source Definition +

    +Unfortunatly, the removal of LZW compression means that saved image size has +grown dramatically. Without a change in the TIFF spec to support +another lossless compression format, this is unavoidable. +

    +The library can use zip for lossless compression, but as this is not +part of the spec, TIFFs using zip compression may not work with other +software +

    +We will be making a patch available that will contain the LZW +compression code for users who have either obtained a license from +Unisys or are willing to risk it. +

    +LZW decompression is unchanged. +

    +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • Added zip creation to release makefile target + + +
    + +

    + +CHANGES IN LIBTIFF: + + +
      + +
    • Added html for TIFFWriteTile.3t man page. + +
    • Added some changes to tif_write.c to support rewriting existing + fixed sized tiles and strips. Code mods disabled by default, only + enabled if REWRITE_HACK is defined for now. + +
    • Added TIFFWriteTile.3t man page. + +
    • Added notes on use of makefile.vc in build.html, and fixed + email subscription address. + +
    • Fixed apocalypse-inducing y2k bug in contrib/ras/ras2tiff.c + +
    • Did some casts cleaning up to reduce compiler warnings in tif_fax3.c, + from Bruce Carmeron -- modifications of + changes made by Frank (sun cc still complained on cast). + +
    • fixed various VC++ warnings as suggested by Gilles Vollant + . + +
    • Modified TIFFquery.3t man pages info on TIFFIsByteSwapped() to + not imply applications are responsible for image data swapping. + +
    • HTML-ized the man pages, added to html/man + +
    • Removed LZW Compression to comply with Unisys patent extortion. + +
    • Corrected one remaining 16 -> 32 bit value in tif_fax3.c, + From Ivo Penzar Added patch from Ivo Penzar to have TiffAdvanceDirectory handle + memory mapped files. +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • Fixed apocalypse-inducing y2k bug in contrib/ras/ras2tiff.c +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2004/11/26 14:37:20 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.5.4.html b/src/SDL2/external/tiff-4.0.3/html/v3.5.4.html new file mode 100644 index 000000000..714621e0c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.5.4.html @@ -0,0 +1,88 @@ + + + +Changes in TIFF v3.5.4 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • None + + +
    + +

    + +CHANGES IN LIBTIFF: + + +
      + +
    • Added Pixar tag support. Contributed by Phil Beffery + +
    • Made one more change to tif_dir.c for removal of LZW compression. Also added notice + when LZW compression invoked. + +
    • Fixed bug that caused LZW (non) compression to segfault. Added + warning about LZW compression removed being removed, and why. + +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • Changed default compression in tools to TIFF_PACKBITS, and changed usage descriptions + in tools to reflect removal of LZW compression + +
    • Added nostrip to install in tools/Makefile.in so that debugging + symbols are kept. + +
    • Made Packbits the default compression in tools/tiff2rgba.c instead + of LZW. + + +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2006/01/03 01:45:41 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.5.5.html b/src/SDL2/external/tiff-4.0.3/html/v3.5.5.html new file mode 100644 index 000000000..20be92f8e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.5.5.html @@ -0,0 +1,155 @@ + + + +Changes in TIFF v3.5.5 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      + +
    • configure: added test for libc6 for linux targets. Bug reported by + Stanislav Brabec + +
    • configure: fixed bugs in sed scripts + (applied sed script s:/@:s;@:;s:/s;;:;: to configure). + fix submitted by Stanislav Brabec + +
    • tools/iptcutil was not in files list, and wasn't being + added to tar archive. Updated Makefile.in. + +
    • Added 3.5 docs to html/Makefile.in. + Thanks to Stanislav Brabec + +
    • Fixed tools/tiffcmp so that stopondiff testing works. + Patch care of Joseph Orost . + +
    • Added fax3sm_winnt.c to distribution list in Makefile.in. + +
    • Added libtiff/libtiff.def to TIFFILES distribution list. +
    + +

    + +CHANGES IN LIBTIFF: + + +
      +
    • tif_fax3.c: Fixed serious bug introduced during the uint16->uint32 + conversion for the run arrays. + +
    • Set td_sampleformat default to SAMPLEFORMAT_UINT instead of + SAMPLEFORMAT_VOID in TIFFDefaultDirectory() in tif_dir.c. + +
    • Added "GetDefaulted" support for TIFFTAG_SAMPLEFORMAT in tif_aux.c. + +
    • Patched tif_fax3.c so that dsp->runs is allocated a bit bigger + to avoid overruns encountered with frle_bug.tif. + + +
    • Modified tif_unix.c to support 2-4GB seeks if USE_64BIT_API is + set to 1, and added default (off) setting in tiffconf.h. This + should eventually be set by the configure script somehow. + + The original work on all these 2-4GB changes was done by + Peter Smith (psmith@creo.com). + +
    • Modified tif_win32.c to support 2-4GB seeks. + +
    • tentatively changed toff_t to be unsigned instead of signed to + facilitate support for 2-4GB files. + +
    • Updated a variety of files to use toff_t. Fixed some mixups + between toff_t and tsize_t. + +
    • Set tif_rawdatasize to zero when freeing raw data buffer in + TIFFWriteDirectory(). + +
    • Enabled "REWRITE_HACK" in tif_write.c by default. + +
    • Fix bug in tif_write.c when switching between reading one directory + and writing to another. + +
    • Made TIFFWriteCheck() public, and added TIFFCreateDirectory() + +
    • Added TIFFmemory(3t) functions to libtiff.def. + +
    • Added libtiff/libtiff.def to TIFFILES distribution list. +
    + +

    + +CHANGES IN THE TOOLS: + +
      +
    • fax2ps: Fixed mixup of width and height in bounding box statement + as per submission by Nalin Dahyabhai . + +
    • fax2ps: Modified printruns to take uint32 instead of uint16. + Patch courtesy of Bernt Herd + + +
    • Largely reimplemented contrib/addtiffo to avoid temp files, + updating the TIFF file in place. Fixed a few other bugs to. + +
    • Altered descriptions in tools to reflect "by default" lzw not supported +
    + +

    + +CHANGES IN THE LZW COMPRESSION KIT +
      +
    • created mangle-src.sh -- sed scripts to munge src into LZW enabled format. Thanks to Stanislav Brabec + +
    • created Makefile + +
    • merged tif_dir.c with current source. + + +
    • Created lzw compression kit, as a new CVS module (libtiff-lzw-compression-kit). + +
    • Updated index.html to note lzw compression kit. + +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2004/11/26 14:37:20 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.5.6-beta.html b/src/SDL2/external/tiff-4.0.3/html/v3.5.6-beta.html new file mode 100644 index 000000000..682f845ba --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.5.6-beta.html @@ -0,0 +1,185 @@ + + + +Changes in TIFF v3.5.6 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      + +
    • Added GNULDdso target and switched linux and freebsd to use it. +
    • tools/Makefile.in: Modified to install properly on SGI. +
    • configure: Fixed DSO test for Linux as per patch from + Jan Van Buggenhout . + +
    + +

    + +CHANGES IN LIBTIFF: + + +
      + +
    • tif_dir.c: Clear TIFF_ISTILED flag in TIFFDefaultDirectory + as per http://bugzilla.remotesensing.org/show_bug.cgi?id=18 + from vandrove@vc.cvut.cz. + +
    • Modified tif_packbits.c decoding to avoid overrunning the + output buffer, and to issue a warning if data needs to be + discarded. See http://bugzilla.remotesensing.org/show_bug.cgi?id=18 + +
    • Modified TIFFClientOpen() to emit an error on an attempt to + open a comperessed file for update (O_RDWR/r+) access. This is + because the compressor/decompressor code gets very confused when + the mode is O_RDWR, assuming this means writing only. See + bug http://bugzilla.remotesensing.org/show_bug.cgi?id=13 + +
    • Applied patch for 0x0000 sequences in tif_fax3.h's definition + of EXPAND1D() as per bug 11 (from Roman). + +
    • Fixed tiffcomp.h to avoid win32 stuff if unix #defined, to improve + cygwin compatibility. + +
    • Applied patch from Roman Shpount to tif_fax3.c. This seems to + be a proper fix to the buffer sizing problem. See + http://bugzilla.remotesensing.org/show_bug.cgi?id=11 + +
    • Fixed tif_getimage.c to fix overrun bug with YCbCr images without + downsampling. http://bugzilla.remotesensing.org/show_bug.cgi?id=10 + Thanks to Nick Lamb for reporting the + bug and proving the patch. + +
    • Fixed tif_jpeg.c so avoid destroying the decompressor before + we are done access data thanks to bug report from: + Michael Eckstein . + +
    • tif_open.c: Don't set MMAP for O_RDWR files. + +
    • tif_open.c: Set STRIPCHOP_DEFAULT for O_RDWR as well as O_RDONLY + so that files opened for update can be strip chopped too. + +
    • tif_read.c: fixed up bug with files missing rowsperstrip and + the strips per separation fix done a few weeks ago. + +
    • Tentatively added support for SAMPLEFORMAT_COMPLEXIEEEFP, and + SAMPLEFORMAT_COMPLEXINT. + +
    • index.html, bugs.html: added bugzilla info. + +
    • tif_read.c: fix subtle bug with determining the number of + rows for strips that are the last strip in a separation but + not the last strip of all in TIFFReadEncodedStrip(). + +
    • Applied 16/32 bit fix to tif_fax3.c. Fix supplied by + Peter Skarpetis + +
    • Modified tiffio.h logic with regard to including windows.h. It + won't include it when building with __CYGWIN__. + +
    • README: update to mention www.libtiff.org, don't list Sam's old + email address. + +
    • libtiff/tif_dirread.c: Don't use estimate strip byte count for + one tile/strip images with an offset, and byte count of zero. These + could be "unpopulated" images. + +
    • tif_win32.c: Applied patch to fix overreads and ovverwrites + caught by BoundsChecker. From Arvan Pritchard + (untested). + +
    • tif_getimage.c: Applied patch to silence VC6 warnings. From + Arvan Pritchard + +
    • tif_lzw.c: Applied patch to silence VC6 warnings. From + Arvan Pritchard + +
    • libtiff/tif_apple.c: Applied "Carbon" support patches supplied by + Leonard Rosenthol . May interfere + with correct building on older systems. If so, please let me know. + + +
    + +

    + +CHANGES IN THE TOOLS: + +
      + +
    • tools/rgb2ycbcr.c: fixed output strip size to account for vertical + roundup if rows_per_strip not a multiple of vertical sample size. + +
    • tools/tiffsplit.c: Copy TIFFTAG_SAMPLEFORMAT. + +
    • Modified tiff2bw to ensure portions add to 100%, and that + white is properly recovered. See bug + http://bugzilla.remotesensing.org/show_bug.cgi?id=15 Patch + c/o Stanislav Brabec + +
    + +

    + +CHANGES IN CONTRIB: + +
      + +
    • contrib/addtiffo: Added "averaging" resampling option. + +
    • Added contrib/stream (stream io) code submitted by Avi Bleiweiss. + +
    + +

    + +CHANGES IN THE LZW COMPRESSION KIT +
      + +
    • updated tif_dir.c to reflect changes to no-lzw tif_dir.c + +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2006/03/18 17:12:47 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.5.7.html b/src/SDL2/external/tiff-4.0.3/html/v3.5.7.html new file mode 100644 index 000000000..528df74e6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.5.7.html @@ -0,0 +1,259 @@ + + + +Changes in TIFF v3.5.7 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • libtiff/libtiff.def: Brent Roman submitted new version adding +serveral missing entry points. Also add a few other entry points +later. + +
    • configure, Makefile.in, etc: added support for OPTIMIZER being + set from config.site. +
    • config.guess: updated wholesale to an FSF version apparently + from 1998 (as opposed to 1994). This is mainly inspired by + providing for MacOS X support. + +
    • configure/config.site: modified to check if -lm is needed for + MACHDEPLIBS if not supplied by config.site. Needed for Darwin. +
    • libtiff/tiff.h: Applied hac to try and resolve the problem + with the inttypes.h include file on AIX. (Bug 39) + +
    • configure, *Makefile.in: Various changes to improve configuration + for HP/UX specifically, and also in general. (Bug 40) They include: +
        +
      • Try to handle /usr/bin/sh instead of /bin/sh where necessary. +
      • Upgrade to HP/UX 10.x+ compiler, linker and dso options. +
      • Fixed mmap() test to avoid MMAP_FIXED ... it isn't available on HP +
      • Use -${MAKEFLAGS} in sub makes from makefiles. +
      • Fixed SCRIPT_SH/SHELL handling. +
      +
    • configure: Changes for DSO generation on AIX provided by + John Marquart . + +
    • configure, libtiff/Makefile.in: Modified to build DSOs properly + on Darwin thanks to Robert Krajewski (rpk@alum.mit.edu) and + Keisuke Fujii (fujiik@jlcuxf.kek.jp). + +
    • configure, libtiff/Makefile.in: applied OpenBSD patches as per bug 61. + +
    • Makefile.in: added DESTDIR support as per bug 60. + +
    • libtiff/tif_jpeg.c: Define HAVE_BOOLEAN on windows if RPCNDR.H + has been included. +
    • man/Makefile.in: add TIFFClientOpen link as per debian submitted + bug 66. +
    • libtiff/Makefile.in: Fixed @DSOSUB_VERSION to be @DSOSUF_VERSION@ + in two places. +
    + +

    + + + +CHANGES IN LIBTIFF: + + +
      +
    • tif_fax3.c: keep rw_mode flag internal to fax3 state to remember + whether we are encoding or decoding. This is to ensure graceful + recovery if TIFFClientOpen() discovers an attempt to open a compressed + file for "r+" access, and subsequently close it, as it resets the + tif_mode flag to O_RDONLY in this case to avoid writes, confusing the + compressor's concept of whether it is in encode or decode mode. +
    • tif_luv.c/tiff.h/tiffio.h: + New version of TIFF LogLuv (SGILOG) modules contributed by Greg Ward + (greg@shutterfly.com). He writes: + +
        +
      1. I improved the gamut-mapping function in tif_luv.c for imaginary + colors, because some images were being super-saturated on the input + side and this resulted in some strange color shifts in the output. + +
      2. I added a psuedotag in tiff.h to control random dithering during + LogLuv encoding. This is turned off by default for 32-bit LogLuv and + on for 24-bit LogLuv output. Dithering improves the average color + accuracy over the image. + +
      3. I added a #define for LOG_LUV_PUBLIC, which is enabled by default in + tiffio.h, to expose internal routines for converting between LogLuv and + XYZ coordinates. This is helpful for writing more efficient, + specialized conversion routines, especially for reading LogLuv files. +
      + +
    • libtiff/tif_dirinfo.c: don't declare tiffFieldInfo static on VMS. + +
    • Added TIFFTAG_COPYRIGHT support. +
    • tif_getimage.c: Added support for 16bit minisblack/miniswhite + images in RGBA interface. +
    • libtiff/tif_dirinfo.c: removed duplicate TIFFTAG_PHOTOSHOP as per + bug 44. +
    • libtiff/tif_dirwrite.c: Added support for TIFF_VARIABLE2 in the + case of writing TIFF_BYTE/TIFF_SBYTE fields as per bug 43. + +
    • libtiff/tif_dirinfo.c: Modified the TIFF_BYTE definition for + TIFFTAG_PHOTOSHOP to use a writecount of TIFF_VARIABLE2 (-3) to + force use of uint32 counts instead of short counts. + +
    • libtiff/tif_dirinfo.c: moved pixar and copyright flags to + ensure everything is in order. + +
    • Integrated experimental OJPEG support from Scott Marovich of HP. + +
    • libtiff/tif_open.c: Seek back to zero after failed read, + before writing header. + +
    • libtiff/tiff.h, libtiff/tif_fax3.c: added check for __LP64__ + when checking for 64 bit architectures as per bugzilla bug 67. +
    • libtiff/tif_getimage.c: Use memmove() instead of TIFFmemcpy() + in TIFFReadRGBATile() to avoid issues in cases of overlapping + buffers. See Bug 69 in Bugzilla. +
    • libtiff/tif_getimage.c: Don't complain for CMYK (separated) + images with more than four samples per pixel as per bug 73. + +
    • libtiff/tif_getimage.c: relax handling of contig case where +there are extra samples that are supposed to be ignored as per bug 75. This +should now work for 8bit greyscale or palletted images. + +
    • libtiff/tif_packbits.c: fixed memory overrun error as per bug 77. + +
    • libtiff/tif_getimage.c: Fixed problem with reading strips or +tiles that don't start on a tile boundary. Fix contributed by +Josep Vallverdu (from HP), and further described in bug 47. + +
    • libtif/tif_fax3.c: Removed #ifdef PURIFY logic, and modified to + always use the "safe" version, even if there is a very slight + cost in performance as per bug 54. +
    • libtiff/tif_lzw.c: added dummy LZWSetupEncode() to report an + error about LZW not being available. + +
    • libtiff/tif_dir.c: propagate failure to initialize compression + back from TIFFSetField() as an error status, so applications can + detect failure. + +
    • libtiff/tif_lzw.c: Avoid MS VC++ 5.0 optimization bug as per bug 78. + +
    • libtiff/tif_dirwrite.c: added TIFFRewriteDirectory() function. +Updated TIFFWriteDirectory man page to include TIFFRewriteDirectory. + +
    • libtiff/tiff.h: I have created COMPRESSION_CCITT_T4, + COMPRESSION_CCITT_T6, TIFFTAG_T4OPTIONS and TIFFTAG_T6OPTIONS aliases + in keeping with TIFF 6.0 standard in tiff.h as per bug 83. + +
    • Added PHOTOMETRIC_ITULAB as per bug 90. + +
    + +

    + + + +CHANGES IN THE TOOLS: + +
      +
    • Brent Roman contributed updated tiffcp utility (and tiffcp.1) + with support for extracting subimages with the ,n syntax, and also + adding the -b bias removal flag. +
    • tiff2ps.c/tiff2ps.1: Substantial changes to tiff2ps by + Bruce A. Mallett, including a faster encoder, fixes for level + 2 PostScript, and support for the imagemask operator. +
    • fax2ps.c: Helge (libtiff at oldach.net) submitted fix +that corrects behaviour for non-Letter paper +sizes. (Bug 35) It fixes two problems: +
      + Without scaling (-S) the fax is now centered on the page size specified + with -H and/or -W. Before, fax2ps was using an obscure and practially + useless algorithm to allocate the image relative to Letter sized paper + which sometime sled to useless whitespace on the paper, while at the + same time cutting of the faxes printable area at the opposite border. +
      + + Second, scaling now preserves aspect ratio, which makes unusual faxes + (in particular short ones) print properly. + +
    • thumbnail.c: changed default output compression + to packbits from LZW since LZW isn't generally available. +
    • tiff2rgba.c: added -n flag to avoid emitting alpha component. Also added +a man page for tiff2rgba. + +
    • tiffcmp.c: Fixed multi samples per pixel support for ContigCompare +as per bug 53. +Updated bug section of tiffcmp.1 to note tiled file issues. + +
    • libtiff/tif_getimage.c: Fixed so that failure is properly + reported by gtTileContig, gtStripContig, gtTileSeparate and + gtStripSeparate as per bug 51. + + +
    + +

    + + + +CHANGES IN THE LZW COMPRESSION KIT: +
      +
    • Rewrote lzw patching process so that is required to enable full + LZW support is to drop the tif_lzw.c from the + libtiff-lzw-compression-kit over the one in the libtiff directory. + +
    • Some changes were made to make recovery from failure to + initialize the LZW compressor more graceful. + +
    • Note that as distributed libtiff support LZW decompression, but + not LZW compression. +
    + + + +CHANGES IN THE CONTRIB AREA: +
      +
    • Fixed distribution to include contrib/addtiffo/tif_ovrcache.{c,h}. +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2004/11/26 14:37:20 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.6.0.html b/src/SDL2/external/tiff-4.0.3/html/v3.6.0.html new file mode 100644 index 000000000..888e5472e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.6.0.html @@ -0,0 +1,434 @@ + + + +Changes in TIFF v3.6.0 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      +
    • New utility raw2tiff +for converting raw rasters into TIFF files. +
    • Lots of new tiff2ps options. +
    • Lots of new fax2tiff options. +
    • Lots of bug fixes for LZW, JPEG and OJPEG compression. +
    + +

    Custom Tag Support

    + +The approach to extending libtiff with custom tags has changed radically. +Previously, all internally supported TIFF tags had a place in the +private TIFFDirectory structure within libtiff to hold the values (if read), +and a "field number" (ie. FIELD_SUBFILETYPE) used to identify that tag. +However, every time a new tag was added to the core, the size of the +TIFFDirectory structure would changing, breaking any dynamically linked +software that used the private data structures.

    + +Also, any tag not recognised +by libtiff would not be read and accessable to applications without some +fairly complicated work on the applications part to pre-register the tags +as exemplified by the support for "Geo"TIFF tags by libgeotiff layered on +libtiff.

    + +Amoung other things this approach required the extension code +to access the private libtiff structures ... which made the higher level +non-libtiff code be locked into a specific version of libtiff at compile time. +This caused no end of bug reports!

    + +The new approach is for libtiff to read all tags from TIFF files. Those that +aren't recognised as "core tags" (those having an associated FIELD_ value, +and place for storage in the TIFFDirectory structure) are now read into a +dynamic list of extra tags (td_customValues in TIFFDirectory). When a new +tag code is encountered for the first time in a given TIFF file, a new +anonymous tag definition is created for the tag in the tag definition list. +The type, and some other metadata is worked out from the instance encountered. +These fields are known as "custom tags".

    + +Custom tags can be set and fetched normally using TIFFSetField() and +TIFFGetField(), and appear pretty much like normal tags to application code. +However, they have no impact on internal libtiff processing (such as +compression). Some utilities, such as tiffcp will now copy these custom +tags to the new output files.

    + +As well as the internal work with custom tags, new C API entry points +were added so that extension libraries, such as libgeotiff, could +define new tags more easily without accessing internal data structures. +Because tag handling of extension tags is done via the "custom fields" +mechanism as well, the definition provided externally mostly serves to provide +a meaningful name for the tag. + +The addition of "custom tags" and the altered approach to extending libtiff +with externally defined tags is the primary reason for the shift to the +3.6.x version number from 3.5.x.

    + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • configure, config.site: Fix for large files (>2GiB) support. New +option in the config.site: LARGEFILE="yes". Should be enougth for the large +files I/O. + +
    • configure: Set -DPIXARLOG_SUPPORT option along with -DZIP_SUPPORT. + +
    • html/Makefile.in: Updated to use groffhtml for generating html pages +from man pages. + +
    • configure, libtiff/Makefile.in: Added SCO OpenServer 5.0.6 support +from John H. DuBois III. + +
    • libtiff/{Makefile.vc, libtiff.def}: Missed declarations added. + +
    • libtiff/Makefile.in, tools/Makefile.in: Shared library will not be +stripped when installing, utility binaries will do be stripped. As per bug 93. + +
    • man/Makefile.in: Patch DESTDIR handling as per bug 95. + +
    • configure: OpenBSD changes for Sparc64 and DSO version as per bug 96. + +
    • config.site/configure: added support for OJPEG=yes option to enable +OJPEG support from config.site. + +
    • config.guess, config.sub: Updated from ftp.gnu.org/pub/config. + +
    • configure: Modify CheckForBigEndian so it can work in a cross +compiled situation. + +
    • configure, libtiff/Makefile.in: Changes for building on MacOS 10.1 +as per bug 94. + +
    • html/Makefile.in: added missing images per bug 92. + +
    • port/Makefile.in: fixed clean target per bug 92. +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      + +
    • libtiff/tif_getimage.c: New function TIFFReadRGBAImageOriented() +implemented to retrieve raster array with user-specified origin position. + +
    • libtiff/tif_fax3.c: Fix wrong line numbering. + +
    • libtiff/tif_dirread.c: Check field counter against number of fields. + +
    • Store a list of opened IFD to prevent directory looping. + +
    • libtiff/tif_jpeg.c: modified segment_height calculation to always +be a full height tile for tiled images. Also changed error to just +be a warning. + +
    • libtiff/tif_lzw.c: fixed so that decoder state isn't allocated till +LZWSetupDecode(). Needed to read LZW files in "r+" mode. + +
    • libtiff/tif_dir.c: fixed up the tif_postdecode settings responsible +for byte swapping complex image data. + +
    • libtiff/tif_open.c: Removed error if opening a compressed file +in update mode bug (198). + +
    • libtiff/tif_write.c: TIFFWriteCheck() now fails if the image is +a pre-existing compressed image. That is, image writing to pre-existing +compressed images is not allowed. + +
    • html/man/*.html: Web pages regenerated from man pages. + +
    • libtiff/tif_jpeg.c: Hack to ensure that "boolean" is defined properly +on Windows so as to avoid the structure size mismatch error from libjpeg +(bug 188). + +
    • libtiff/tiff.h: #ifdef USING_VISUALAGE around previous Visual Age +AIX porting hack as it screwed up gcc. (bug 39) + +
    • libtiff/tiff.h: added COMPRESSION_JP2000 (34712) for LEAD tools +custom compression. + +
    • libtiff/tif_dirread.c: Another fix for the fetching SBYTE arrays +by the TIFFFetchByteArray() function. (bug 52) + +
    • libtiff/tif_dirread.c: Expand v[2] to v[4] in TIFFFetchShortPair() +as per bug 196. + +
    • libtiff/tif_lzw.c: Additional consistency checking added in +LZWDecode() and LZWDecodeCompat() fixing bugs 190 and 100. + +
    • libtiff/tif_lzw.c: Added check for valid code lengths in LZWDecode() +and LZWDecodeCompat(). Fixes bug 115. + +
    • tif_getimage.c: Ensure that TIFFRGBAImageBegin() returns the +return code from the underlying pick function as per bug 177. + +
    • libtiff/{tif_jpeg.c,tif_strip.c,tif_print.c}: Hacked tif_jpeg.c to +fetch TIFFTAG_YCBCRSUBSAMPLING from the jpeg data stream if it isn't +present in the tiff tags as per bug 168. + +
    • libtiff/tif_jpeg.c: Fixed problem with setting of nrows in +JPEGDecode() as per bug 129. + +
    • libtiff/tif_read.c, libtiff/tif_write.c: TIFFReadScanline() and +TIFFWriteScanline() now set tif_row explicitly in case the codec has +fooled with the value as per bug 129. + +
    • libtiff/tif_ojpeg.c: Major upgrade from Scott. Details in bug 156. + +
    • libtiff/tif_open.c: Pointers to custom procedures +in TIFFClientOpen() are checked to be not NULL-pointers. + +
    • libtiff/tif_lzw.c: Assertions in LZWDecode and LZWDecodeCompat +replaced by warnings. Now libtiff should read corrupted LZW-compressed +files by skipping bad strips as per bug 100. + +
    • libtiff/: tif_dirwrite.c, tif_write.c, tiffio.h: +TIFFCheckpointDirectory() +routine added as per bug 124. The +TIFFWriteDirectory +man page discusses this new function as well as the related +TIFFRewriteDirectory(). + +
    • libtiff/: tif_codec.c, tif_compress.c, tiffiop.h, tif_getimage.c: +Introduced +additional members tif->tif_decodestatus and tif->tif_encodestatus +for correct handling of unconfigured codecs (we should not try to read +data or to define data size without correct codecs). See bug 119. + +
    • tif_dirread.c: avoid div-by-zero if rowbytes is zero in chop func as +per bug 111. + +
    • libtiff/: tiff.h, tif_dir.c, tif_dir.h, tif_dirinfo.c, tif_dirread.c, +tif_dirwrite.c: Dwight Kelly added get/put code for new tag XMLPACKET as +defined in Adobe XMP Technote. Added missing INKSET tag value from TIFF 6.0 +spec INKSET_MULTIINK (=2). Added missing tags from Adobe TIFF technotes: +CLIPPATH, XCLIPPATHUNITS, YCLIPPATHUNITS, OPIIMAGEID, OPIPROXY and +INDEXED. Added PHOTOMETRIC tag value from TIFF technote 4 ICCLAB (=9). + +
    • libtiff/tif_getimage.c: Additional check for supported codecs added in +TIFFRGBAImageOK, TIFFReadRGBAImage, TIFFReadRGBAStrip and TIFFReadRGBATile now +use TIFFRGBAImageOK before reading a per bug 110. + +
    • libtiff/: tif_dir.c, tif_dir.h, tif_dirinfo.c, tif_dirread.c, +tif_dirwrite.c: Added routine +TIFFDataWidth for determining +TIFFDataType sizes instead of working with tiffDataWidth array +directly as per bug 109. + +
    • libtiff/: tif_dirinfo.c, tif_dirwrite.c: Added possibility to +read broken TIFFs with LONG type used for TIFFTAG_COMPRESSION, +TIFFTAG_BITSPERSAMPLE, TIFFTAG_PHOTOMETRIC as per bug 99. + +
    • libtiff/{tiff.h,tif_fax3.c}: Add support for __arch64__ as per bug 94. + +
    • libtiff/tif_read.c: Fixed TIFFReadEncodedStrip() to fail if the +decodestrip function returns anything not greater than zero as per bug 97. + +
    • libtiff/tif_jpeg.c: fixed computation of segment_width for +tiles files to avoid error about it not matching the +cinfo.d.image_width values ("JPEGPreDecode: Improper JPEG strip/tile +size.") for ITIFF files. Apparently the problem was incorporated since +3.5.5, presumably during the OJPEG/JPEG work recently. + +
    • libtiff/tif_getimage.c: If DEFAULT_EXTRASAMPLE_AS_ALPHA is 1 +(defined in tiffconf.h - 1 by default) then the RGBA interface +will assume that a fourth extra sample is ASSOCALPHA if the +EXTRASAMPLE value isn't set for it. This changes the behaviour of +the library, but makes it work better with RGBA files produced by +lots of applications that don't mark the alpha values properly. +As per bugs 93 and 65. + +
    • libtiff/tif_jpeg.c: allow jpeg data stream sampling values to +override those from tiff directory. This makes this work with +ImageGear generated files. + +
    + +

    + + + +CHANGES IN THE TOOLS: + +
      + +
    • tiff2ps: Added page size setting +when creating PS Level 2. + +
    • tiff2ps: Fixed PS comment emitted when +FlateDecode is being used. + +
    • tiffsplit: increased the maximum +number of pages that can be split. + +
    • raw2tiff: Added option `-p' to +explicitly select color space of input image data. + +
    • tiffmedian: Suppiort for large +(> 2GB) images. + +
    • ppm2tiff: Fixed possible endless loop. + +
    • tiff2rgba: Switched to use +TIFFReadRGBAImageOriented() +instead of TIFFReadRGBAImage(). + +
    • tiffcmp: Fixed problem with unused data +comparing (bug 349). `-z' option now can be used to set the number of reported +different bytes. + +
    • tiffcp: Added possibility to specify +value -1 to -r option to get the entire image as one strip (bug 343). + +
    • tiffcp: Set the correct RowsPerStrip +and PageNumber values (bug 343). + +
    • fax2tiff: Page numbering fixed (bug +341). + +
    • ppm2tiff: PPM header parser improved: +now able to skip comments. + +
    • tiff2ps: Force deadzone printing when +EPS output specified (bug 325). + +
    • tiff2ps: Add ability to generate +PS Level 3. It basically allows one to use the /flateDecode filter for ZIP +compressed TIFF images. Patch supplied by Tom Kacvinsky (bug 328). + +
    • tiffcp: Fixed problem with colorspace +conversion for JPEG encoded images (bugs 23 and 275) + +
    • fax2tiff: Applied patch from +Julien Gaulmin. More switches for fax2tiff tool for better control +of input and output (bugs 272 and 293). + +
    • raw2tiff: +New utility for turning raw raster images into TIFF files +written by Andrey Kiselev. + +
    • tiff2ps: +Sebastian Eken provided patches (bug 200) to add new these new +switches: +
        +
      • -b #: for a bottom margin of # inches +
      • -c: center image +
      • -l #: for a left margin of # inches +
      • -r: rotate the image by 180 degrees +
      + +Also, new features merged with code for shrinking/overlapping. + +
    • tiff2ps: Don't emit BeginData/EndData +DSC comments since we are unable to properly include the amount to skip +as per bug 80. + +
    • tiff2ps: Added workaround for some +software that may crash when last strip of image contains fewer number +of scanlines than specified by the `/Height' variable as per bug 164. + +
    • tiff2ps: Patch from John Williams to add new +functionality for tiff2ps utility splitting long images in several pages as +per bug 142. New switches: +
        +
      • -H #: split image if height is more than # inches +
      • -L #: overLap split images by # inches +
      + +
    • tiff2ps: New commandline +switches to override resolution units obtained from the input file per bug 131: +
        +
      • -x: override resolution units as centimeters +
      • -y: override resolution units as inches +
      + +
    • fax2tiff: Updated to reflect +latest changes in libtiff per bug 125. + +
    • tiff2ps: Division by zero fixed as per bug 88. + +
    • tiffcp: +Added support for 'Orientation' tag. + +
    • tiffdump: +include TIFFTAG_JPEGTABLES in tag list. + +
    • tiffset: fix bug in error reporting. + +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: +
      + +
    • Fixed distribution to include contrib/addtiffo/tif_ovrcache.{c,h}. +
    • libtiff/contrib/win95: renamed to contrib/win_dib. Added new +Tiffile.cpp example of converting TIFF files into a DIB on Win32 as per +bug 143. + +
    + + + +CHANGES IN THE LZW COMPRESSION +KIT: +
      + +
    • LZW compression kit synchronized with actual libtiff version. + +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2003/10/04 11:38:17 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.6.1.html b/src/SDL2/external/tiff-4.0.3/html/v3.6.1.html new file mode 100644 index 000000000..d10606225 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.6.1.html @@ -0,0 +1,199 @@ + + + +Changes in TIFF v3.6.1 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + + + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      + +
    • libtiff/makefile.vc, tools/makefile.vc: Support for IJG JPEG library. + +
    • Makefile.in: Add an absolute path to the test_pics.sh call. + +
    • Makefile.in: Add an absolute path to the test_pics.sh call. + +
    • libtiff/tiffcomp.h: #define _BSDTYPES_DEFINED when defining BSD typedefs. + +
    • configure, libtiff/{Makefile.in, mkversion.c}: Relative buildings fixed. + +
    • Makefile.in: Add an absolute path to the test_pics.sh call. + +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      + +
    • libtiff/{tif_color.c, tif_getimage.c, tiffio.h}: Added support +for ReferenceBlackWhite tag handling when converted from YCbCr color space as +per bug 120. + +
    • libtiff/{tif_getimage.c, tif_aux.c}: Read WhitePoint tag from the +file and properly use it for CIE Lab 1976 to RGB transform. + +
    • libtiff/{tif_getimage.c, tiffio.h}: Finally resolved problems with +orientation handling. TIFFRGBAImage interface now properly supports all +possible orientations, i.e. images will be flipped both in horizontal and +vertical directions if required. 'Known bugs' section now removed from the +appropriate manual pages. + +
    • libtiff/tif_luv.c: Fixed bug in 48-bit to 24-bit conversion routine, +reported by Antonio Scuri. + +
    • libtiff/{tiffio.h, tif_codec.c}: Added new function +TIFFIsCODECConfigured(), suggested by Ross Finlayson. + +
    • libtiff/tif_ojpeg.c: TIFFVGetField() function now can properly extract +the fields from the OJPEG files. Patch supplied by Ross Finlayson. + +
    • libtiff/tif_dir.h: _TIFFFindOrRegisterdInfo declaration replaced +with _TIFFFindOrRegisterFieldInfo as reported by Ross Finlayson. + +
    • libtiff/tif_dirinfo.c: Implemented binary search in _TIFFMergeFieldInfo(). +Patch supplied by Ross Finlayson. + +
    • tif_dirread.c: do not mark all anonymously defined tags to be IGNOREd (as +it was done in 3.6.0). + +
    • libtiff/{tiff.h, tif_dirinfo.c}: Added support for IFD (13) datatype, +intruduced in "Adobe PageMaker TIFF Technical Notes". + +
    • libtiff/{tif_color.c, tif_getimage.c, tiffio.h}: New color space +conversion code: CIE L*a*b* 1976 images now supported by the TIFFRGBAImage +interface. YCbCr to RGB conversion code also moved there and now has +publicly available interface. These +routines currently used in TIFFRGBAImage interface only and not supported in +other libtiff tools yet. So if you want, for example, to convert CIE Lab image +into PostScript file you should do it in two steps: chnge colorspace to RGB +using tiff2rgba utility abd then process +it with the tiff2ps. + +
    • libtiff/tif_tile.c: Remove spurious use of "s" (sample) in the +planarconfig_contig case in TIFFComputeTile() as per bug 387 + +
    • libtiff/tiffiop.h: New macros: TIFFmax and TIFFmin. + +
    • libtiff/{tiffio.h, tif_strip.c}: Added TIFFRawStripSize() function +as suggested by Chris Hanson. + +
    • libtiff/{tif_lzw.c, tif_fax3.c}: Proper support for update mode +as per bug 424. + +
    + +

    + + + +CHANGES IN THE TOOLS: + +
      + +
    • tiff2pdf: New tool, written by +Ross Finlayson, to directly convert TIFF files to PDF. + +
    • tiffgt: Unmaintained and platform +dependent sgigt utility removed and replaced with the completely rewritten +portable tiffgt tool (depend on OpenGL and +GLUT). This tool will not build by default. + +
    • ras2tiff: Properly determine +SUN Rasterfiles with the reverse byte order (it is reported by the magic +header field). Problem reported by Andreas Wiesmann. + +
    • raw2tiff: Implemented image size +guessing using correlation coefficient calculation between two neighbour +lines. + +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: +
      + +
    • contrib/pds/{tif_pdsdirread.c, tif_pdsdirwrite.c}: Use TIFFDataWidth() +function insted of tiffDataWidth array. + +
    + + + +CHANGES IN THE LZW COMPRESSION +KIT: +
      + +
    • Proper support for update mode as per bug 424. + +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2003/12/24 22:14:15 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.7.0.html b/src/SDL2/external/tiff-4.0.3/html/v3.7.0.html new file mode 100644 index 000000000..413f2c605 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.7.0.html @@ -0,0 +1,144 @@ + + + + Changes in TIFF v3.7.0 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      + +
    • Several bugs found after 3.7.0beta2 release were fixed. + +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • ltmain.sh: Fix for MinGW compilation. +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      + +
    • libtiff/{tif_dirread.c, tif_jpeg.c, tif_luv.c, tif_ojpeg.c, + tif_pixarlog.c, tif_write.c}: Handle the zero strip/tile sizes + properly (Dmitry V. Levin, Marcus Meissner). + +
    • libtiff/tif_dirinfo.c: Type of the TIFFTAG_SUBIFD field changed + to TIFF_IFD. + +
    • Preliminary support for BigTIFF files: now libtiff can + recognize and reject to open such images. ;-) + +
    • libtiff/tif_dir.c: Initialize td_tilewidth and td_tilelength fields + of the TIFFDirectory structure with the 0 instead of -1 to avoid + confusing integer overflows in TIFFTileRowSize() for striped images. + +
    • libtiff/tif_dir.c: Initialize td_tilewidth and td_tilelength fields + of the TIFFDirectory structure with the 0 instead of -1 to avoid + confusing integer overflows in TIFFTileRowSize() for striped images. + +
    • libtiff/tif_dirinfo.c: Fix bug with tif_foundfield and reallocation + of tif_fieldinfo as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=630 + +
    • libtiff/tif_compress.c: Improved error reporting in + TIFFGetConfiguredCODECs() (Dmitry V. Levin). + +
    + +

    + + + +CHANGES IN THE TOOLS: + +
      +
    • tiffcmp.c (leof): Renamed from 'eof' in order to avoid + conflict noticed under MinGW. + +
    • tiff2pdf.c: Fixed TransferFunction tag handling reported + by Ross A. Finlayson. + +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • No changes. + +
    + + + +CHANGES IN THE LZW COMPRESSION +KIT: +
      + +
    • This one is not longer needed. + +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2004/12/20 19:31:44 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.7.0alpha.html b/src/SDL2/external/tiff-4.0.3/html/v3.7.0alpha.html new file mode 100644 index 000000000..95c633ca5 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.7.0alpha.html @@ -0,0 +1,249 @@ + + + + Changes in TIFF v3.7.0alpha + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      +
    • Significant changes in software configuration: we are switched + to GNU autotools now. + +
    • tiffset: tiffset now can set any libtiff supported tags. Tags + can be supplied by the mnemonic name or number. +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • Get rid of the old configuration system and switch to + GNU autotools. +
    + +

    + + + +CHANGES IN LIBTIFF: + + + +

    + + + +CHANGES IN THE TOOLS: + +
      +
    • tiffset: tiffset now can set any libtiff supported tags. Tags + can be supplied by the mnemonic name or number. + +
    • ycbcr.c: fixed main() declaration as per: + + http://bugzilla.remotesensing.org/show_bug.cgi?id=513. + +
    • tiffsplit: Don't forget + to copy Photometric Interpretation tag. + +
    • tiffsplit: Fixed problem with + unproperly written multibyte files. Now output files will be written + using the same byte order flag as in the input image. See + . + +
    • tiffsplit: Copy JPEGTables + tag contents for JPEG compressed images. Reported by Artem Mirolubov. + +
    • tiffcp: Close output file + on normal exit. + +
    • tiffcp: Don't emit warnings + when Orientation tag does not present in the input image. + +
    • tiffcp: Properly set + Photometric Interpretation in case of JPEG compression of grayscale + images. + +
    • tiffcp: Fixed problem with wrong + interpretation of the InkNames tag as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=466. + Memory leak fixed. + +
    • tiffcp: Fixed problem with + wrong Photometric setting for non-RGB images. + +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • Outdated stuff removed. + +
    • Almost all programs are sinchronized with the current libtiff + and should compile without problems. + +
    + + + +CHANGES IN THE LZW COMPRESSION +KIT: +
      + +
    • No changes. + +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2006/03/18 17:12:47 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.7.0beta.html b/src/SDL2/external/tiff-4.0.3/html/v3.7.0beta.html new file mode 100644 index 000000000..7d7c868b0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.7.0beta.html @@ -0,0 +1,162 @@ + + + + Changes in TIFF v3.7.0beta + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      +
    • LZW compression enabled by default. You don't need the separate + compression kit anymore. + +
    • bmp2tiff: Added new utility to convert Windows BMP files + into TIFFs. + +
    • The first attempt to implement a test suite. +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • Many portability fixes in the new autotooled build suite. +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      +
    • libtiff/{tif_luv.c, tif_next.c, tif_thunder.c}: Several buffer + overruns fixed, as noted by Chris Evans. + +
    • BSD data types (u_char, u_short, u_int, u_long) is no longer + used internally in the libtiff. Should result in simpler configuration + and better portability. + +
    • libtiff/tiff.h: Fix column tagging. Reference current Adobe XMP + specification. Reference libtiff bug tracking system to submit + private tag additions. + +
    • libtiff/tif_dirread.c: Don't reject to read tags of the + SamplesPerPixel size when the tag count is greater than number of + samples as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=576. + +
    • libtiff/{tiffio.h, tif_open.c}: Applied patches from + Joris Van Damme to avoid requirement for tiffiop.h inclusion in + some applications. Look for details here: + + http://www.asmail.be/msg0054799560.html. + +
    • libtiff/{tiffiop.h, tif_dirinfo.c}: Fixed problem with the static + variable as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=593. + +
    • libtiff/tif_lzw.c: LZW compression code is merged back from the + separate package. All libtiff tools are updated to not advertise an + abcence of LZW support. + +
    • libtiff/tif_dir.c: Call TIFFError() instead of producing warnings + when setting custom tags by value. Reported by Eric Fieleke. + +
    + +

    + + + +CHANGES IN THE TOOLS: + +
      +
    • tiff2ps: Avoid zero division in setupPageState() function; + properly initialize array in PSDataBW(). + +
    • tiff2pdf: Multiple bugfixes. + +
    • ras2tiff: Fixed issue with missed big-endian checks as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=586. + +
    • bmp2tiff: Added new utility to convert Windows BMP files + into TIFFs. + +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • No changes. + +
    + + + +CHANGES IN THE LZW COMPRESSION +KIT: +
      + +
    • This one is not longer needed. + +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2006/03/18 17:12:47 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.7.0beta2.html b/src/SDL2/external/tiff-4.0.3/html/v3.7.0beta2.html new file mode 100644 index 000000000..67dd8dad3 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.7.0beta2.html @@ -0,0 +1,131 @@ + + + + Changes in TIFF v3.7.0beta2 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      + +
    • The code has been reviewed by Dmitry Levin: added checks + for values, returned by the space allocation functions, fixed + problems with the possible integer overflows. + +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • Several fixes in the test suite. +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      + +
    • Preliminary support for BigTIFF files: now libtiff can + recognize and reject to open such images. ;-) + +
    • libtiff/tif_dirinfo.c: changed type of XMLPacket (tag 700) to + TIFFTAG_BYTE instead of TIFFTAG_UNDEFINED to comply with the info + in the Adobe XMP Specification. + +
    • Added many checks for integer overflow and for successful space + allocations in the different parts of library. Code review + completed by Dmitry V. Levin. + +
    • libtiff/{tiffio.h, tif_compress.c}: Added + TIFFGetConfiguredCODECs()function to get the list of configured codecs. + +
    + +

    + + + +CHANGES IN THE TOOLS: + +
      +
    • tiff2bw: Write ImageWidth/Height tags to output file, as + noted by Gennady Khokhorin. + +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • No changes. + +
    + + + +CHANGES IN THE LZW COMPRESSION +KIT: +
      + +
    • This one is not longer needed. + +
    + + TIFF home page.
    + +
    + +Last updated $Date: 2006/03/18 17:12:47 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.7.1.html b/src/SDL2/external/tiff-4.0.3/html/v3.7.1.html new file mode 100644 index 000000000..b888792f2 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.7.1.html @@ -0,0 +1,233 @@ + + + + Changes in TIFF v3.7.1 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      + +
    • This is mostly bugfix release. Most important fix is the one + related to wrong custom tag read/write code. + +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      + +
    • autogen.sh: aclocal and autoheader should be executed after + libtoolize. Also add '-I .' to aclocal invocation to check + current directory for macros. + +
    • nmake.opt: Link with the user32.lib in windowed mode. As per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=697 + +
    • nmake.opt, makefile.vc: make it easier to rename the libtiff DLL. + +
    • configure, configure.ac: Added --enable-rpath option to embed + linker paths into library binary. + +
    + +

    + + + +CHANGES IN LIBTIFF: + + + +

    + + + +CHANGES IN THE TOOLS: + +
      + +
    • fax2ps.c: Be able to extract the first page (#0). As per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=690 + +
    • tiff2ps.c: Fixed wrong variable data type when read Position + tags (Tristan Hill). + +
    • tiff2ps.c: Fixed wrong variable data type when read Resolution + tags (Peter Fales). + +
    • tiffset.c: Check the malloc return value (Dmitry V. Levin). + +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • No changes. + +
    + +Last updated $Date: 2004/12/20 19:31:44 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.7.2.html b/src/SDL2/external/tiff-4.0.3/html/v3.7.2.html new file mode 100644 index 000000000..6cb6f7cd3 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.7.2.html @@ -0,0 +1,222 @@ + + + + Changes in TIFF v3.7.2 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      + +
    • Maintainance release. Many bugfixes in the build environment + and compatibility improvements. + +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + + + +

    + + + +CHANGES IN LIBTIFF: + + + +

    + + + +CHANGES IN THE TOOLS: + + + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • No changes. + +
    + +Last updated $Date: 2005/03/15 15:17:44 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.7.3.html b/src/SDL2/external/tiff-4.0.3/html/v3.7.3.html new file mode 100644 index 000000000..d69845176 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.7.3.html @@ -0,0 +1,230 @@ + + + + Changes in TIFF v3.7.3 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      +
    • Replace runtime endianess check with the compile time one. + +
    • Added support for the new predictor type (floating point + predictor), defined at the TIFF Technical Note 3. + +
    • Added Support for custom tags, passed by value. + Added support for all DNG tags. +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + + + +

    + + + +CHANGES IN LIBTIFF: + +
      +
    • tiffiop.h, tif_open.c: Added open option 'h' to avoid reading + the first IFD when needed. As per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=875 + +
    • tiff.h: Use correct int size on Sparc 64bit/Sun compiler + platform. As per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=855 + +
    • tif_dirinfo.c: Added support for ClipPath, XClipPathUnits + and YClipPathUnits tags. + +
    • tif_dirinfo.c, tif_dir.h, tif_dir.c, tif_print.c: Make + DocumentName, Artist, HostComputer, ImageDescription, Make, Model, + Copyright, DateTime, PageName, TextureFormat, TextureWrapModes and + TargetPrinter tags custom. + +
    • tif_jpeg.c: Cleanup the codec state depending on TIFF_CODERSETUP + flag (to fix memory leaks). + +
    • tif_dirwrite.c: Use tdir_count when calling + TIFFCvtNativeToIEEEDouble() in the TIFFWriteDoubleArray() function as + per bug + http://bugzilla.remotesensing.org/show_bug.cgi?id=845 + +
    • tif_dirinfo.c, tif_print.c: TIFFFetchByteArray() returns + uint16 array when fetching the BYTE and SBYTE fields, so we should + consider result as pointer to uint16 array and not as array of chars. + As per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=831 + +
    • tif_dir.c: More efficient custom tags retrieval as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=830 + +
    • tif_win32.c: Use FILE_SHARE_READ | FILE_SHARE_WRITE share + mode in CreateFile() call as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=829 + +
    • tif_jpeg.c: Substantial fix for addtiffo problems with + JPEG encoded TIFF files. Pre-allocate lots of space for jpegtables + in directory. + +
    • tif_dirread.c: Changed the code that computes + stripbytecount[0] if it appears bogus to ignore if stripoffset[0] is + zero. This is a common case with GDAL indicating a "null" tile/strip. + +
    • tif_jpeg.c: added LIB_JPEG_MK1 support in JPEGDecodeRaw(). + +
    • tif_dirread.c: Ensure that broken files with too many + values in PerSampleShorts, TIFFFetchPerSampleLongs and + TIFFFetchPerSampleAnys work ok instead of crashing. + + http://bugzilla.remotesensing.org/show_bug.cgi?id=843 + +
    • tif_predict.h, tif_predict.c: Added ability to decode and encode + floating point predictor, as per TIFF Technical Note 3. + See http://chriscox.org/TIFF_TN3_Draft2.pdf for details. + +
    • tiffio.h, tiffiop.h, tif_dir.c, tif_read.c, tif_swab.c: + Added _TIFFSwab24BitData() and TIFFSwabArrayOfLong() functions used to + swap 24-bit floating point values. + +
    • tiff.h: Added predictor constants. + +
    • tiffiop.h, tif_dir.c: Use uint32 type for appropriate values + in _TIFFVSetField() function. Inspired by the bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=816 + +
    • tif_open.c: Do not read header in case the output file should + be truncated (Ron). + +
    • tif_dirinfo.c, tif_config.h.vc: Use lfind() instead of bsearch() + in _TIFFFindFieldInfoByName() function (Ron). + +
    • tif_dir.c, tif_print.c: Properly handle all data types in custom + tags. + +
    • dirinfo.c: Added DNG tags. + +
    • tiff.h: Added missed DNG tag (LensInfo); added DNG 1.1.0.0 tags. + +
    • tif_dir.c, tif_print.c: Added Support for custom tags, passed + by value. + +
    • tiff.h, tif_dirinfo.c, tiffiop.h: Added EXIF related tags. +
    + +

    + + + +CHANGES IN THE TOOLS: + + + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • addtiffo/{tif_overview.c, tif_ovrcache.c, tif_ovrcache.h}: + Make overviews working for contiguous images. + +
    + +Last updated $Date: 2006/01/04 22:04:46 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.7.4.html b/src/SDL2/external/tiff-4.0.3/html/v3.7.4.html new file mode 100644 index 000000000..943732019 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.7.4.html @@ -0,0 +1,133 @@ + + + + Changes in TIFF v3.7.4 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      +
    • Fixed important bug in custom tags handling code.. +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • Applied patch from Patrick Welche (all scripts moved in the + 'config' and 'm4' directories). + +
    • SConstruct, libtiff/SConstruct: Added the first very preliminary + support for SCons software building tool (http://www.scons.org/). + This is experimental infrastructure and it will exist along with the + autotools stuff. + +
    • port/lfind.c: Added lfind() replacement module. +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      +
    • tif_dir.c: When prefreeing tv->value in TIFFSetFieldV + also set it to NULL to avoid double free when re-setting custom + string fields as per: + + http://bugzilla.remotesensing.org/show_bug.cgi?id=922 + +
    • tif_dir.c: Fixed up support for swapping "double complex" + values (128 bits as 2 64 bits doubles). GDAL gcore tests now + pass on bigendian (macosx) system. + +
    • libtiff/{tif_dirread.c, tif_dirinfo.c}: Do not upcast BYTEs to + SHORTs in the TIFFFetchByteArray(). Remove TIFFFetchExtraSamples() + function, use TIFFFetchNormalTag() instead as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=831 + + Remove TIFFFetchExtraSamples() function, use TIFFFetchNormalTag() + instead. + +
    • tif_print.c: Fixed printing of the BYTE and SBYTE arrays. + +
    • tif_write.c: Do not check the PlanarConfiguration field in + the TIFFWriteCheck() function in case of single band images (as per + TIFF spec). + +
    • libtiff/{tif_dir.c, tif_dir.h, tif_dirinfo.c, tif_print.c}: + Make FieldOfViewCotangent, MatrixWorldToScreen, MatrixWorldToCamera, + ImageFullWidth, ImageFullLength and PrimaryChromaticities tags custom. +
    + +

    + + + +CHANGES IN THE TOOLS: + +
      +
    • tiffcp.c: Fixed WhitePoint tag copying. +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      +
    • tiffdump.c: Added support for TIFF_IFD datatype. + +
    • addtiffo/{tif_overview.c, tif_ovrcache.c, tif_ovrcache.h}: + Make overviews working for contiguous images. + +
    + +Last updated $Date: 2005/11/03 14:18:43 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.8.0.html b/src/SDL2/external/tiff-4.0.3/html/v3.8.0.html new file mode 100644 index 000000000..914dcb0c5 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.8.0.html @@ -0,0 +1,199 @@ + + + + Changes in TIFF v3.8.0 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      +
    • Read-only support for custom directories (e.g. EXIF directory). + +
    • Preliminary support for MS MDI format. +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • Make the default strip size configurable via the + --with-default-strip-size and STRIP_SIZE_DEFAULT options. +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      +
    • tiffio.h: Added VC_EXTRALEAN definition before including + windows.h, to reduce the compile time. + +
    • tif_jpeg.c: Improve compilation under MinGW. + +
    • {tif_aux.c, tif_dir.c, tif_dir.h, tif_dirwrite.c, + tif_print.c, tif_getimage.c}: Make InkSet, NumberOfInks, DotRange and + StoNits tags custom. + +
    • {tif_aux.c, tif_dir.c, tif_dir.h, tif_print.c}: Make + WhitePoint tag custom. + +
    • tiffio.h: fixed typo that potentially resulted in + redefininition of USE_WIN32_FILEIO + +
    • {tif_dir.c, tif_dir.h, tif_print.c}: Make RichTIFFIPTC, + Photoshop and ICCProfile tags custom. + +
    • libtiff/*, contrib/*: Added 'dual-mode' error handling, enabling + newer code to get context indicator in error handler and still + remain compatible with older code: Done TIFFError calls everywhere + except in tools. + +
    • tiffinfo.c: Print EXIF directory contents if exist. + +
    • {tif_dirinfo.c, tif_dirread.c, tif_dir.h, tif_dir.c}: + Custom directory read-only support. + +
    • {tif_aux.c, tif_dirinfo.c, tif_dirread.c, tif_dir.h, + tif_dir.c, tif_print.c}: Make YCbCrCoefficients and ReferenceBlackWhite + tags custom. + +
    • tif_dirread.c: One more workaround for broken StripByteCounts + tag. Handle the case when StripByteCounts array filled with + completely wrong values. + +
    • tif_dirinfo.c: Release file descriptor in case of failure + in the TIFFOpenW() function as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1003 + +
    • tif_dirinfo.c: Correctly yse bsearch() and lfind() + functions as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1008 + +
    • tif_open.c, tiff.h, tiffdump.c: Incorporate preliminary support + for MS MDI format. + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1002 + +
    • libtiff.def, tiffiop.h, tiffio.h: Made TIFFFreeDirectory + public. + +
    • /tif_dirinfo.c: Make XResolution, YResolution and + ResolutionUnit tags modifiable during write process. As per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=977 + +
    • if_dirread.c: Don't try and split single strips into "0" strips + in ChopUpSingleUncompressedStrip. This happens in some degenerate + cases (like 1x1 files with stripbytecounts==0 (gtsmall.jp2 embed tiff) + +
    • tif_fax3.c: changed 'at scanline ...' style warning/errors + with incorrect use of tif_row, to 'at line ... of + strip/tile ...' style. +
    + +

    + + + +CHANGES IN THE TOOLS: + + + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      +
    • contrib/addtiffo/*: Major upgrade by Joris to support subsampled + YCbCr images in jpeg compressed TIFF files. + +
    + +Last updated $Date: 2006/01/04 23:38:38 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.8.1.html b/src/SDL2/external/tiff-4.0.3/html/v3.8.1.html new file mode 100644 index 000000000..9fea1407e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.8.1.html @@ -0,0 +1,217 @@ + + + + Changes in TIFF v3.8.1 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      +
    • Bug-fix release. +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      +
    • libtool related stuff updated from the 2.1a branch. + +
    • Fix with_default_strip_size comparison as reported by + Norihiko Murase. +
    + +

    + + + +CHANGES IN LIBTIFF: + + + +

    + + + +CHANGES IN THE TOOLS: + + + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      +
    + +Last updated $Date: 2006/03/13 14:52:12 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.8.2.html b/src/SDL2/external/tiff-4.0.3/html/v3.8.2.html new file mode 100644 index 000000000..e64812758 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.8.2.html @@ -0,0 +1,137 @@ + + + + Changes in TIFF v3.8.2 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      +
    • Bug-fix release. +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + + + +

    + + + +CHANGES IN LIBTIFF: + +
      +
    • tif_strip.c: Take subsampling in account when calculating + TIFFScanlineSize(). + +
    • tif_jpeg.c, tif_fax3.c, tif_zip.c, tif_pixarlog.c, + tif_lzw.c, tif_luv.c: Use _TIFFSetDefaultCompressionState() in all + codec cleanup methods. As per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1120 + +
    • tif_jpeg.c: Do not cleanup codec state in TIFFInitJPEG(). As + per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1119 + +
    • tif_dir.c: Use double type instead of dblparam_t. + +
    • tif_dirread.c: Do not check the PlanarConfig tag presence + in TIFFReadDirectory, because it is always set at the start of + function and we allow TIFFs without that tag set. + +
    + +

    + + + +CHANGES IN THE TOOLS: + + + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      +
    + +Last updated $Date: 2006/03/23 14:54:01 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.9.0beta.html b/src/SDL2/external/tiff-4.0.3/html/v3.9.0beta.html new file mode 100644 index 000000000..d7d8821a5 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.9.0beta.html @@ -0,0 +1,304 @@ + + + + Changes in TIFF v3.9.0beta + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). +If you don't find something listed here, then it was not done in this +timeframe, or it was not considered important enough to be mentioned. +The following information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      +
    • New tiffcrop utility contributed by Richard Nolde. + tiffcrop does the same as tiffcp, but also can crop, + extract, rotate and mirror images. + +
    • tif_jbig.c: Added support for JBIG compression scheme + (34661 code), contributed by Lee Howard. + +
    • Totally new implementation of OJPEG module from + Joris Van Damme. No need to patch libjpeg anymore. Many OJPEG files + should be supported now that was not supported previously. + +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      + +
    • tif_config.wince.h, tiffconf.wince.h, tif_wince.c: WinCE-specific + compatibility stuff from Mateusz Loskot. + +
    • Rename config.h.vc and tif_config.h.vc to config.vc.h and + tif_config.vc.h for easier identification by folks using an IDE. + +
    • configure, configure.ac: OJPEG support enabled by default (i.e., + whe the conformant JPEG support enabled). + +
    • README.vms, Makefile.am, configure.com, libtiff/{Makefile.am, + tif_config.h-vms, tif_stream.cxx, tif_vms.c, tiffconf.h-vms}: + Added support for OpenVMS by Alexey Chupahin. + +
    • nmake.opt: use /EHsc for VS2005 compatibility. Also define + _CRT_SECURE_NO_DEPRECATE to avoid noise on VS2005. + +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      +
    • tif_dirinfo.c (_TIFFFindFieldInfo): Don't attempt to + bsearch() on a NULL fieldinfo list. + (_TIFFFindFieldInfoByName): Don't attempt to lfind() on a NULL + fieldinfo list. + +
    • tif_jpeg.c: Changed JPEGInitializeLibJPEG() so that it + will convert from decompressor to compressor or compress to decompress + if required by the force arguments. This works around a problem in + where the JPEGFixupTestSubsampling() may cause a decompressor to + be setup on a directory when later a compressor is required with the + force flag set. Occurs with the addtiffo program for instance. + +
    • tif_dirwrite.c: Fixed swapping of byte arrays stored + in-place in tag offsets as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1363 + +
    • tif_getimage.c: workaround for 'Fractional scanline' error + reading OJPEG images with rowsperstrip that is not a multiple of + vertical subsampling factor. This bug is mentioned in + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1390 and + + http://www.asmail.be/msg0054766825.html + +
    • tif_dirread.c: Added special function to handle + SubjectDistance EXIF tag as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1362 + +
    • tif_dirread.c, tif_read.c: Type of the byte counters + changed from tsize_t to uint32 to be able to work with data arrays + larger than 2GB. Fixes bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=89 + Idea submitted by Matt Hancher. + +
    • tif_dir.c: Workaround for incorrect TIFFs with + ExtraSamples == 999 produced by Corel Draw. As per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1490 + +
    • tif_write.c: TIFFAppendToStrip() - clear sorted flag if + we move a strip. + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1359 + +
    • tif_fax3.c: Save the state of printdir codec dependent method. + +
    • tif_jpeg.c: Save the state of printdir codec dependent method + as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1273 + +
    • tif_win32.c: Fixed problem with offset value manipulation + as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1322 + +
    • tif_fax3.c, tif_next.c, tif_pixarlog.c: Fixed multiple + vulnerabilities, as per Gentoo bug (): + + http://bugs.gentoo.org/show_bug.cgi?id=142383 + +
    • tif_lzw.c, tif_zip.c: Fixed problems with mixing + encoding and decoding on the same read-write TIFF handle. The LZW + code can now maintain encode and decode state at the same time. The + ZIP code will switch back and forth as needed. + + http://bugzilla.remotesensing.org/show_bug.cgi?id=757 + +
    • tif_msdos.c: Avoid handle leak for failed opens. + c/o Thierry Pierron + +
    • tif_dirwrite.c: take care not to flush out buffer of strip/tile + data in _TIFFWriteDirectory if TIFF_BEENWRITING not set. Relates + to bug report by Peng Gao with black strip at bottom of images. + +
    • tif_dirwrite.c: make sure to use uint32 for wordcount in + TIFFWriteNormanTag if writecount is VARIABLE2 for ASCII fields. + It already seems to have been done for other field types. Needed + for "tiffset" on files with geotiff ascii text. + +
    • tif_dirinfo.c: Added missed EXIF tag ColorSpace (40961). + +
    • tif_dirread.c: Move IFD fetching code in the separate + function TIFFFetchDirectory() avoiding code duplication in + TIFFReadDirectory() and TIFFReadCustomDirectory(). + +
    • tif_readdir.c: Added case in EstimateStripByteCounts() for tiled + files. Modified TIFFReadDirectory() to not invoke + EstimateStripByteCounts() for case where entry 0 and 1 are unequal but + one of them is zero. + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1204 + +
    • tif_open.c, tif_dirread.c, tiffiop.h: Move IFD looping + checking code in the separate function TIFFCheckDirOffset(). + +
    • tif_aux.c: Added _TIFFCheckRealloc() function. + +
    • tif_fax3.c: Fixed problems in fax decoder as per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=1194 + +
    • tif_jbig.c: Added support for JBIG compression scheme + (34661 code) contributed by Lee Howard. As per bug + + http://bugzilla.remotesensing.org/show_bug.cgi?id=896 + +
    • tif_getimage.c: Added support for planarconfig separate + non-subsampled YCbCr (i.e. separate YCbCr with subsampling [1,1]). + +
    • tif_getimage.c: Revision of all RGB(A) put routines: +
        +
      • Conversion of unassociated alpha to associated alpha + now done with more performant LUT, and calculation more + correct. +
      • Conversion of 16bit data to 8bit data now done with + more performant LUT, and calculation more correct +
      • Bugfix of handling of 16bit RGB with unassociated alpha +
      + +
    • tif_ojpeg.c: totally new implementation + +
    • tif_getimage.c: removed TIFFTAG_JPEGCOLORMODE handling + of OJPEG images in favor of tif_getimage.c native handling of + YCbCr and desubsampling. + +
    • tif_jpeg.c: JPEGVSetField() so that altering the photometric + interpretation causes the "upsampled" flag to be recomputed. Fixes + peculiar bug where photometric flag had to be set before jpegcolormode + flag. + +
    + +

    + + + +CHANGES IN THE TOOLS: + + + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • contrib/addtiffo/tif_overview.c: Fix problems with odd sized + output blocks in TIFF_DownSample_Subsampled() (bug 1542). + +
    • contrib/dbs/xtiff/xtiff.c: Make xtiff utility compilable. + Though it is still far from the state of being working and useful. + +
    + +Last updated $Date: 2009-08-20 22:57:39 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.9.1.html b/src/SDL2/external/tiff-4.0.3/html/v3.9.1.html new file mode 100644 index 000000000..c97d94f8c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.9.1.html @@ -0,0 +1,115 @@ + + + + Changes in TIFF v3.9.1 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). If you don't +find something listed here, then it was not done in this timeframe, or +it was not considered important enough to be mentioned. The following +information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      +
    • This is a bug-fix release for several bugs (two of which + are dire) which were discovered in the 3.9.0 release. + +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      + +
    • Several defines were missing from tif_config.vc.h which + are necessary to compile the library using MSVC. + +
    • Colorized tests were actually not enabled as expected. + Parallel tests mode is now also enabled so that tests can be + run in parallel, and test output is sent to .log files. + +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      +
    • libtiff/tif_write.c (TIFFAppendToStrip): Remove cast + which caused libtiff to output a wrong last strip with + byte-count and strip-offset of zero. This cast was added on + the day of the 3.9.0 release. + +
    • libtiff/tif_dirwrite.c: Back out changes from 2007-11-22 + that resulted in the final strip not being written in some + circumstances. + http://bugzilla.maptools.org/show_bug.cgi?id=2088 + +
    + +

    + + + +CHANGES IN THE TOOLS: + +
      +
    • None + +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • None + +
    + +Last updated $Date: 2009-08-28 18:54:11 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v3.9.2.html b/src/SDL2/external/tiff-4.0.3/html/v3.9.2.html new file mode 100644 index 000000000..bb76794c9 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v3.9.2.html @@ -0,0 +1,122 @@ + + + + Changes in TIFF v3.9.2 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). If you don't +find something listed here, then it was not done in this timeframe, or +it was not considered important enough to be mentioned. The following +information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      + +
    • Fixes a number of bugs present in the 3.9.1 release. + +
    • OJPEG support updated to work with IJG JPEG 7 release. + +
    • Tiffcrop validated for most TIFF storage subformats and sample depths. + +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      + +
    • x86_64 now uses the same default fill order as i386. + +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      +
    • Writing tags with an array value of type TIFF_DOUBLE now + returns correct error status. The TIFFTAG_SMINSAMPLEVALUE and + TIFFTAG_SMAXSAMPLEVALUE tags failed to write without this fix. + +
    • OJPEG decoder now works with IJG JPEG 7. Resolves "Bug + 2090 - OJPEG crash with libjpeg v7". + http://bugzilla.maptools.org/show_bug.cgi?id=2090 + +
    • Eliminate most GCC "dereferencing type-punned pointer" + warnings. + +
    + +

    + + + +CHANGES IN THE TOOLS: + +
      + +
    • New tiffcrop from Richard Nolde. Major updates to add + significant functionality for reading and writing tile based + images with bit depths not a multiple of 8 which cannot be + handled by tiffcp. + +
    • Allow building tools with GCC using the "-Wformat + -Werror=format-security" flags. + +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • None + +
    + +Last updated $Date: 2009-11-04 17:38:13 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v4.0.0.html b/src/SDL2/external/tiff-4.0.3/html/v4.0.0.html new file mode 100644 index 000000000..9694a1e04 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v4.0.0.html @@ -0,0 +1,269 @@ + + + + Changes in TIFF v4.0.0 + + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). If you don't +find something listed here, then it was not done in this timeframe, or +it was not considered important enough to be mentioned. Please consult +the ChangeLog file in the source package for full change details. The +following information is located here: +

    +

    +

    + + + +

    MAJOR CHANGES:

    + +BigTIFF support changes: + +
      + +
    • The options parameter in the TIFFOpen and TIFFClientOpen funcs has + been extended. When creating new files, you can add option '4' to + specify you want to create a ClassicTIFF file, though that is the + default and the option is not strictly necessary. (As such, old + calling code will continue to function and create ClassicTIFF files.) + Or you can add option '8' to specify you want to create a BigTIFF file + instead. This new option is also reflected in some of the tools we + already upgraded. For instance, you can use the -8 option on tiffcp to + have tiffcp produce BigTIFF files instead of the default ClassicTIFF. + (Whilst on additional option is provided for version selection when + creating new files, no such option is necessary when reading TIFF + files. LibTiff reads ClassicTIFF and BigTIFF both, and the application + does not need to be aware which TIFF version an opened file is.) + +
    • Although the tag count in BigTIFF is 64bit, we restricted the + count in the implementation to a much more reasonable size. This is + necessary in current implementation, because all tag data gets read + automatically in the IFD reading stage, so if there's half a dozen + private tags with multiple gigabytes of data that causes considerable + overhead even if the application level is never interested in these + tags. Our choice to ignore tags with data longer then a certain sanity + value is much needed as things stand. We also recommend to step away + from writing tiles that are 8 kilobyte in their uncompressed form, or + writing single-line strips, in really big files, resulting in mega's + of tiles or strips. It's much more efficient to choose bigger tile or + strip sizes, up to several megabyte if needed, and have a few kilo of + tiles or strips instead. + +
    • Although it's rare, some application code does directly access + file offsets. Some of these are automatically upgraded because they + used the toff_t type, others need to be aware that the datatype + changed and need to start using toff_t or uint64. This impacts access + to tags like the EXIF IFD tag, for example, or the SubIfds tag, or to + StripOffsets or TileOffsets, the return type of functions like + TIFFCurrentDirOffset, and a parameter type to functions like + TIFFSetSubDirectory. + +
    • Although it's rare, some application code does use structures + like TIFFHeader or TIFFDirEntry that used to be an exact binary + representation of TIFF structures. These need to change. The old + TIFFHeader structure is replaced by the new TIFFHeaderClassic, + TIFFHeaderBig, and TIFFHeaderCommon structures that are an exact + binary representation of the ClassicTIFF and BigTIFF header, and of + the part that is common to both. There is no new equivalent for the + old TIFFDirEntry structure (or more precisely, there is still a + TIFFDirEntry structure, but it is changed, moved to library-private + definition, and no longer an exact binary representation of the tag + structure of either TIFF version). + +
    • Sizer functions, like TIFFTileSize or TIFFScanlineSize and the + like, return a tmsize_t value (tmsize_t is defined as int32 on 32bit + machines, and int64 on 64bit machines, and as such it is meant to + represent signed memory sizes). This is because we figure 98% of the + calling code uses the return value as sizes in allocations and the + like. So, any overflow that is theoretically possible with BigTIFF + when LibTiff is running on a 32bit system, is best detected inside the + sizer functions and it is best to return a type that makes sense as a + memory size. If your calling code is the exception and is interested + in actual file size, you best use the newer TIFFTileSize64 or + TIFFScanlineSize64 function that returns an uint64 type. + +
    • These TIFF tags require a 64-bit type as an argument in + libtiff 4.0.0: +
        +
      • TIFFTAG_FREEBYTECOUNTS +
      • TIFFTAG_FREEOFFSETS +
      • TIFFTAG_STRIPBYTECOUNTS +
      • TIFFTAG_STRIPOFFSETS +
      • TIFFTAG_TILEBYTECOUNTS +
      • TIFFTAG_TILEOFFSETS +
      + +
    + +Other important backward incompatible changes in the public API: + +
      +
    • TIFFRewriteField() renamed into _TIFFRewriteField() and moved out + from the public interface (from tiffio.h to tiffiop.h). Type of its + 'count' parameter changed from uint32 to tmsize_t. + +
    • TIFFMergeFieldInfo() returns non-void result now. It returns 0 + if successful and -1 if failed. Though this is now obsoleted function + and should not be used in new programs. Use the new tag extension + scheme instead. + +
    • TIFFFieldWithTag() and TIFFFieldWithName() functions now return + pointer to TIFFField constant object instead of TIFFFieldInfo. + +
    • TIFFReassignTagToIgnore() function and TIFFIgnoreSense enumeration + have been removed. They was unused and never been used properly. + Should be unneeded for high-level applications. + +
    • TIFFTagValue structure removed from the public tiffio.h + to private tif_dir.h and not accessible anymore. It should be unneeded + for high-level applications. + +
    + +

    + + +

    CHANGES IN THE SOFTWARE CONFIGURATION:

    + +
      + +
    • Updated autotools: Autoconf 2.68, Automake 1.11.1, libtool + 2.4. + +
    • Enabled support for Automake silent build rules + (--enable-silent-rules or 'make V=0') + +
    • Enabled support for Automake colorized and parallel tests. + +
    • Added detection of 64-bit integer types since libtiff 4.0 + requires use of 64-bit signed and unsigned integer types. + +
    • Libtiff now provides a more comprehensive test suite with + over 72 tests, which may be executed on Unix-like systems, or + under Microsoft Windows using MinGW/MSYS or Cygwin. + +
    • --disable-lzma configure option to disable use of liblzma. + +
    • --enable-defer-strile-load configure option to enable + experimental deferred strip/tile offset/size loading. May + cause some extremely sophisticated uses of libtiff to fail. + +
    • --enable-chunky-strip-read configure option to enable + experimental enable reading large strips in chunks in + TIFFReadScanline(). + +
    • Now always uses WIN32 native I/O functions for Microsoft + Windows except for under Cygwin. + +
    • Now provides a pkg-config support file (libtiff-4.pc). + +
    + +

    + + + +

    CHANGES IN LIBTIFF:

    + +
      + +
    • Patches/fixes made to stable libtiff (v3.9.X) are also + applied to 4.0.0. There are too many to list here. See the + distribution ChangeLog for a detailed change list. + +
    • There is considerable change in some files like + tif_dirread and tif_dirwrite. These changes don't impact + backwards compatibility, they are mostly a clean rewrite that + does allow BigTIFF support as well as somewhat more robust + reading of the unexpected already and will also serve future + API extension but does not impact current API or functionality + in a negative way that you need to know about. + +
    • Although there is still a functional definition for types + like toff_t (file offset), tstrip_t (strip index number), etc, + we recommend against using these in newer code. We have + learned that it is next to impossible to use these + consistently and make real abstraction of the binary format of + these types. Instead, at a certain level we always end up + doing casts anyway, and taking the exact binary format into + account, so these types are nothing but dangerously misleading + and obfuscating. You do not need to update calling code that + uses them, as 99.9% of such code will continue to work. But we + recommend against using them in newer calling code, and we + started replacing them with binary clear types like uint16, + uint32 and such in the library. + +
    • We do use and will continue to use one functional type + that is an exception to the above rule, being tmsize_t. This + is a signed memory size type, i.e. it is int32 on 32bit + machines, or int64 on 64bit machines. + +
    • Optionally support LZMA compression via TIFF tag 34925. + Tiffcp supports compression levels similar to "-c lzma:p1" or + "-c zip:p9 for setting the LZMA compression parameters. + +
    • Optionally defer the load of strip/tile offset and size + tags for optimized scanning of directories. Enabled with the + --enable-defer-strile-load configure option (DEFER_STRILE_LOAD + #define in tif_config.h). + +
    • Optionally enable experimental support for reading big + strips in chunks. Enabled with the --enable-chunky-strip-read + configure option. + +
    + +

    + + + +

    CHANGES IN THE TOOLS:

    + +
      + +
    • tiffset: add -d and -sd switches to allow operation on + a particular directory, not just the first. + +
    + +

    + + + +

    CHANGES IN THE CONTRIB AREA:

    + +
      +
    + +Last updated $Date: 2011-04-09 21:01:00 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v4.0.1.html b/src/SDL2/external/tiff-4.0.3/html/v4.0.1.html new file mode 100644 index 000000000..1f113c195 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v4.0.1.html @@ -0,0 +1,113 @@ + + + + Changes in TIFF v4.0.1 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). If you don't +find something listed here, then it was not done in this timeframe, or +it was not considered important enough to be mentioned. The following +information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      + +
    • None + +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      + +
    • --enable-ld-version-script: New configure option to + enable shared library symbol versioning on ELF-based systems + (e.g. Linux and FreeBSD) which use the GNU linker. This + allows multiple major versions of libtiff to be loaded + simultaneously into the same application or library without + conflict, as long as all libtiffs involved are built with + versioned symbols. This option is not enabled by default. + +
    • Added libtiff private dependency on -llzma for pkg-config. + +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      +
    • libtiff/tif_dir.c, libtiff/tif_dirread.c: Extra caution around + assumption tag fetching is always successful. + +
    • libtiff/tif_jpeg.c: Extra caution for case where sp is NULL. + +
    + +

    + + + +CHANGES IN THE TOOLS: + +
      + +
    • None + +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • None + +
    + +Last updated $Date: 2012-02-18 21:53:27 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/html/v4.0.2.html b/src/SDL2/external/tiff-4.0.3/html/v4.0.2.html new file mode 100644 index 000000000..c265b9529 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/html/v4.0.2.html @@ -0,0 +1,118 @@ + + + + Changes in TIFF v4.0.2 + + + + + + + +TIFF CHANGE INFORMATION + + + + +

    +This document describes the changes made to the software between the +previous and current versions (see above). If you don't +find something listed here, then it was not done in this timeframe, or +it was not considered important enough to be mentioned. The following +information is located here: +

    +

    +

    + + + +MAJOR CHANGES: + +
      + +
    • None + +
    + + +

    + + +CHANGES IN THE SOFTWARE CONFIGURATION: + +
      + +
    • None + +
    + +

    + + + +CHANGES IN LIBTIFF: + +
      + +
    • tif_getimage.c: added support for _SEPARATED CMYK images. + +
    • tif_getimage.c: Added support for greyscale + alpha. + +
    • Added TIFFCreateCustomDirectory() and TIFFCreateEXIFDirectory() functions. +
    • tif_print.c: Lots of fixes around printing corrupt or + hostile input. + +
    • Improve handling of corrupt ycbcrsubsampling values. + +
    • tif_unix.c: use strerror to get meaningful error messages. + +
    • tif_jpeg.c: fix serious bugs in JPEGDecodeRaw(). + +
    • tif_jpeg.c: Fix size overflow (zdi-can-1221,CVE-2012-1173). + +
    + +

    + + + +CHANGES IN THE TOOLS: + +
      + +
    • tiff2pdf: Defend against integer overflows while + calculating required buffer sizes (CVE-2012-2113). + +
    + +

    + + + +CHANGES IN THE CONTRIB AREA: + +
      + +
    • None + +
    + +Last updated $Date: 2012-06-16 00:19:37 $. + + + diff --git a/src/SDL2/external/tiff-4.0.3/libtiff-4.pc.in b/src/SDL2/external/tiff-4.0.3/libtiff-4.pc.in new file mode 100644 index 000000000..abe75a62e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff-4.pc.in @@ -0,0 +1,11 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: libtiff +Description: Tag Image File Format (TIFF) library. +Version: @VERSION@ +Libs: -L${libdir} -ltiff +Libs.private: @tiff_libs_private@ +Cflags: -I${includedir} diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/Makefile.am b/src/SDL2/external/tiff-4.0.3/libtiff/Makefile.am new file mode 100644 index 000000000..82fa31dc8 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/Makefile.am @@ -0,0 +1,150 @@ +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +LIBPORT = $(top_builddir)/port/libport.la +LIBTIFF = $(top_builddir)/libtiff/libtiff.la +libtiffincludedir = $(includedir) + +EXTRA_DIST = Makefile.vc \ + SConstruct \ + tif_config.h-vms \ + tif_config.vc.h \ + tif_config.wince.h \ + tiffconf.vc.h \ + tiffconf.wince.h \ + libtiff.def \ + libtiff.map \ + libtiffxx.map + +libtiffinclude_HEADERS = \ + tiff.h \ + tiffio.h \ + tiffvers.h + +if HAVE_CXX +libtiffinclude_HEADERS += tiffio.hxx +endif + +noinst_HEADERS = \ + t4.h \ + tif_dir.h \ + tif_predict.h \ + tiffiop.h \ + uvcode.h + +nodist_libtiffinclude_HEADERS = \ + tiffconf.h + +libtiff_la_SOURCES = \ + tif_aux.c \ + tif_close.c \ + tif_codec.c \ + tif_color.c \ + tif_compress.c \ + tif_dir.c \ + tif_dirinfo.c \ + tif_dirread.c \ + tif_dirwrite.c \ + tif_dumpmode.c \ + tif_error.c \ + tif_extension.c \ + tif_fax3.c \ + tif_fax3sm.c \ + tif_flush.c \ + tif_getimage.c \ + tif_jbig.c \ + tif_jpeg.c \ + tif_jpeg_12.c \ + tif_luv.c \ + tif_lzma.c \ + tif_lzw.c \ + tif_next.c \ + tif_ojpeg.c \ + tif_open.c \ + tif_packbits.c \ + tif_pixarlog.c \ + tif_predict.c \ + tif_print.c \ + tif_read.c \ + tif_strip.c \ + tif_swab.c \ + tif_thunder.c \ + tif_tile.c \ + tif_version.c \ + tif_warning.c \ + tif_write.c \ + tif_zip.c + +libtiffxx_la_SOURCES = \ + tif_stream.cxx + +if WIN32_IO +EXTRA_DIST += tif_unix.c +libtiff_la_SOURCES += tif_win32.c +else +EXTRA_DIST += tif_win32.c +libtiff_la_SOURCES += tif_unix.c +endif + +lib_LTLIBRARIES = libtiff.la +if HAVE_CXX +lib_LTLIBRARIES += libtiffxx.la +endif + +libtiff_la_LDFLAGS = \ + -no-undefined \ + -version-info $(LIBTIFF_VERSION_INFO) +if HAVE_RPATH +libtiff_la_LDFLAGS += $(LIBDIR) +endif +if HAVE_LD_VERSION_SCRIPT +libtiff_la_LDFLAGS += -Wl,--version-script=$(srcdir)/libtiff.map +endif +libtiff_la_LIBADD = $(LIBPORT) + +libtiffxx_la_LDFLAGS = \ + -no-undefined \ + -version-info $(LIBTIFF_VERSION_INFO) +if HAVE_RPATH +libtiffxx_la_LDFLAGS += $(LIBDIR) +endif +if HAVE_LD_VERSION_SCRIPT +libtiffxx_la_LDFLAGS += -Wl,--version-script=$(srcdir)/libtiffxx.map +endif +libtiffxx_la_LIBADD = $(LIBTIFF) $(LIBPORT) +libtiffxx_la_DEPENDENCIES = libtiff.la + +# +# The finite state machine tables used by the G3/G4 decoders +# are generated by the mkg3states program. On systems without +# make these rules have to be manually carried out. +# +noinst_PROGRAMS = mkg3states +mkg3states_SOURCES = mkg3states.c tif_fax3.h +mkg3states_LDADD = $(LIBPORT) + +faxtable: mkg3states + (rm -f tif_fax3sm.c && ./mkg3states -b -c const tif_fax3sm.c) + diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/Makefile.in b/src/SDL2/external/tiff-4.0.3/libtiff/Makefile.in new file mode 100644 index 000000000..a658342d5 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/Makefile.in @@ -0,0 +1,915 @@ +# Makefile.in generated by automake 1.12.4 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + + + +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@HAVE_CXX_TRUE@am__append_1 = tiffio.hxx +@WIN32_IO_TRUE@am__append_2 = tif_unix.c +@WIN32_IO_TRUE@am__append_3 = tif_win32.c +@WIN32_IO_FALSE@am__append_4 = tif_win32.c +@WIN32_IO_FALSE@am__append_5 = tif_unix.c +@HAVE_CXX_TRUE@am__append_6 = libtiffxx.la +@HAVE_RPATH_TRUE@am__append_7 = $(LIBDIR) +@HAVE_LD_VERSION_SCRIPT_TRUE@am__append_8 = -Wl,--version-script=$(srcdir)/libtiff.map +@HAVE_RPATH_TRUE@am__append_9 = $(LIBDIR) +@HAVE_LD_VERSION_SCRIPT_TRUE@am__append_10 = -Wl,--version-script=$(srcdir)/libtiffxx.map +noinst_PROGRAMS = mkg3states$(EXEEXT) +subdir = libtiff +DIST_COMMON = $(am__libtiffinclude_HEADERS_DIST) $(noinst_HEADERS) \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(srcdir)/tif_config.h.in $(srcdir)/tiffconf.h.in \ + $(top_srcdir)/config/depcomp \ + $(top_srcdir)/config/mkinstalldirs +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_HEADER = tif_config.h tiffconf.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(libdir)" \ + "$(DESTDIR)$(libtiffincludedir)" \ + "$(DESTDIR)$(libtiffincludedir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +libtiff_la_DEPENDENCIES = $(LIBPORT) +am__libtiff_la_SOURCES_DIST = tif_aux.c tif_close.c tif_codec.c \ + tif_color.c tif_compress.c tif_dir.c tif_dirinfo.c \ + tif_dirread.c tif_dirwrite.c tif_dumpmode.c tif_error.c \ + tif_extension.c tif_fax3.c tif_fax3sm.c tif_flush.c \ + tif_getimage.c tif_jbig.c tif_jpeg.c tif_jpeg_12.c tif_luv.c \ + tif_lzma.c tif_lzw.c tif_next.c tif_ojpeg.c tif_open.c \ + tif_packbits.c tif_pixarlog.c tif_predict.c tif_print.c \ + tif_read.c tif_strip.c tif_swab.c tif_thunder.c tif_tile.c \ + tif_version.c tif_warning.c tif_write.c tif_zip.c tif_win32.c \ + tif_unix.c +@WIN32_IO_TRUE@am__objects_1 = tif_win32.lo +@WIN32_IO_FALSE@am__objects_2 = tif_unix.lo +am_libtiff_la_OBJECTS = tif_aux.lo tif_close.lo tif_codec.lo \ + tif_color.lo tif_compress.lo tif_dir.lo tif_dirinfo.lo \ + tif_dirread.lo tif_dirwrite.lo tif_dumpmode.lo tif_error.lo \ + tif_extension.lo tif_fax3.lo tif_fax3sm.lo tif_flush.lo \ + tif_getimage.lo tif_jbig.lo tif_jpeg.lo tif_jpeg_12.lo \ + tif_luv.lo tif_lzma.lo tif_lzw.lo tif_next.lo tif_ojpeg.lo \ + tif_open.lo tif_packbits.lo tif_pixarlog.lo tif_predict.lo \ + tif_print.lo tif_read.lo tif_strip.lo tif_swab.lo \ + tif_thunder.lo tif_tile.lo tif_version.lo tif_warning.lo \ + tif_write.lo tif_zip.lo $(am__objects_1) $(am__objects_2) +libtiff_la_OBJECTS = $(am_libtiff_la_OBJECTS) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +libtiff_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(libtiff_la_LDFLAGS) $(LDFLAGS) -o $@ +am_libtiffxx_la_OBJECTS = tif_stream.lo +libtiffxx_la_OBJECTS = $(am_libtiffxx_la_OBJECTS) +libtiffxx_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ + $(CXXFLAGS) $(libtiffxx_la_LDFLAGS) $(LDFLAGS) -o $@ +@HAVE_CXX_TRUE@am_libtiffxx_la_rpath = -rpath $(libdir) +PROGRAMS = $(noinst_PROGRAMS) +am_mkg3states_OBJECTS = mkg3states.$(OBJEXT) +mkg3states_OBJECTS = $(am_mkg3states_OBJECTS) +mkg3states_DEPENDENCIES = $(LIBPORT) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/config/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CXXFLAGS) $(CXXFLAGS) +AM_V_CXX = $(am__v_CXX_@AM_V@) +am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@) +am__v_CXX_0 = @echo " CXX " $@; +am__v_CXX_1 = +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ + $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CXXLD = $(am__v_CXXLD_@AM_V@) +am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@) +am__v_CXXLD_0 = @echo " CXXLD " $@; +am__v_CXXLD_1 = +SOURCES = $(libtiff_la_SOURCES) $(libtiffxx_la_SOURCES) \ + $(mkg3states_SOURCES) +DIST_SOURCES = $(am__libtiff_la_SOURCES_DIST) $(libtiffxx_la_SOURCES) \ + $(mkg3states_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__libtiffinclude_HEADERS_DIST = tiff.h tiffio.h tiffvers.h \ + tiffio.hxx +HEADERS = $(libtiffinclude_HEADERS) $(nodist_libtiffinclude_HEADERS) \ + $(noinst_HEADERS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GLUT_CFLAGS = @GLUT_CFLAGS@ +GLUT_LIBS = @GLUT_LIBS@ +GLU_CFLAGS = @GLU_CFLAGS@ +GLU_LIBS = @GLU_LIBS@ +GL_CFLAGS = @GL_CFLAGS@ +GL_LIBS = @GL_LIBS@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBDIR = @LIBDIR@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTIFF_ALPHA_VERSION = @LIBTIFF_ALPHA_VERSION@ +LIBTIFF_DOCDIR = @LIBTIFF_DOCDIR@ +LIBTIFF_MAJOR_VERSION = @LIBTIFF_MAJOR_VERSION@ +LIBTIFF_MICRO_VERSION = @LIBTIFF_MICRO_VERSION@ +LIBTIFF_MINOR_VERSION = @LIBTIFF_MINOR_VERSION@ +LIBTIFF_RELEASE_DATE = @LIBTIFF_RELEASE_DATE@ +LIBTIFF_VERSION = @LIBTIFF_VERSION@ +LIBTIFF_VERSION_INFO = @LIBTIFF_VERSION_INFO@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +tiff_libs_private = @tiff_libs_private@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +LIBPORT = $(top_builddir)/port/libport.la +LIBTIFF = $(top_builddir)/libtiff/libtiff.la +libtiffincludedir = $(includedir) +EXTRA_DIST = Makefile.vc SConstruct tif_config.h-vms tif_config.vc.h \ + tif_config.wince.h tiffconf.vc.h tiffconf.wince.h libtiff.def \ + libtiff.map libtiffxx.map $(am__append_2) $(am__append_4) +libtiffinclude_HEADERS = tiff.h tiffio.h tiffvers.h $(am__append_1) +noinst_HEADERS = \ + t4.h \ + tif_dir.h \ + tif_predict.h \ + tiffiop.h \ + uvcode.h + +nodist_libtiffinclude_HEADERS = \ + tiffconf.h + +libtiff_la_SOURCES = tif_aux.c tif_close.c tif_codec.c tif_color.c \ + tif_compress.c tif_dir.c tif_dirinfo.c tif_dirread.c \ + tif_dirwrite.c tif_dumpmode.c tif_error.c tif_extension.c \ + tif_fax3.c tif_fax3sm.c tif_flush.c tif_getimage.c tif_jbig.c \ + tif_jpeg.c tif_jpeg_12.c tif_luv.c tif_lzma.c tif_lzw.c \ + tif_next.c tif_ojpeg.c tif_open.c tif_packbits.c \ + tif_pixarlog.c tif_predict.c tif_print.c tif_read.c \ + tif_strip.c tif_swab.c tif_thunder.c tif_tile.c tif_version.c \ + tif_warning.c tif_write.c tif_zip.c $(am__append_3) \ + $(am__append_5) +libtiffxx_la_SOURCES = \ + tif_stream.cxx + +lib_LTLIBRARIES = libtiff.la $(am__append_6) +libtiff_la_LDFLAGS = -no-undefined -version-info \ + $(LIBTIFF_VERSION_INFO) $(am__append_7) $(am__append_8) +libtiff_la_LIBADD = $(LIBPORT) +libtiffxx_la_LDFLAGS = -no-undefined -version-info \ + $(LIBTIFF_VERSION_INFO) $(am__append_9) $(am__append_10) +libtiffxx_la_LIBADD = $(LIBTIFF) $(LIBPORT) +libtiffxx_la_DEPENDENCIES = libtiff.la +mkg3states_SOURCES = mkg3states.c tif_fax3.h +mkg3states_LDADD = $(LIBPORT) +all: tif_config.h tiffconf.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .c .cxx .lo .o .obj +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libtiff/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign libtiff/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +tif_config.h: stamp-h1 + @if test ! -f $@; then rm -f stamp-h1; else :; fi + @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi + +stamp-h1: $(srcdir)/tif_config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status libtiff/tif_config.h +$(srcdir)/tif_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +tiffconf.h: stamp-h2 + @if test ! -f $@; then rm -f stamp-h2; else :; fi + @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h2; else :; fi + +stamp-h2: $(srcdir)/tiffconf.h.in $(top_builddir)/config.status + @rm -f stamp-h2 + cd $(top_builddir) && $(SHELL) ./config.status libtiff/tiffconf.h + +distclean-hdr: + -rm -f tif_config.h stamp-h1 tiffconf.h stamp-h2 +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } +libtiff.la: $(libtiff_la_OBJECTS) $(libtiff_la_DEPENDENCIES) $(EXTRA_libtiff_la_DEPENDENCIES) + $(AM_V_CCLD)$(libtiff_la_LINK) -rpath $(libdir) $(libtiff_la_OBJECTS) $(libtiff_la_LIBADD) $(LIBS) +libtiffxx.la: $(libtiffxx_la_OBJECTS) $(libtiffxx_la_DEPENDENCIES) $(EXTRA_libtiffxx_la_DEPENDENCIES) + $(AM_V_CXXLD)$(libtiffxx_la_LINK) $(am_libtiffxx_la_rpath) $(libtiffxx_la_OBJECTS) $(libtiffxx_la_LIBADD) $(LIBS) + +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +mkg3states$(EXEEXT): $(mkg3states_OBJECTS) $(mkg3states_DEPENDENCIES) $(EXTRA_mkg3states_DEPENDENCIES) + @rm -f mkg3states$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(mkg3states_OBJECTS) $(mkg3states_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mkg3states.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_aux.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_close.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_codec.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_color.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_compress.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_dir.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_dirinfo.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_dirread.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_dirwrite.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_dumpmode.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_error.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_extension.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_fax3.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_fax3sm.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_flush.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_getimage.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_jbig.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_jpeg.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_jpeg_12.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_luv.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_lzma.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_lzw.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_next.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_ojpeg.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_open.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_packbits.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_pixarlog.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_predict.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_print.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_read.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_stream.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_strip.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_swab.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_thunder.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_tile.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_unix.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_version.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_warning.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_win32.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_write.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tif_zip.Plo@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +.cxx.o: +@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $< + +.cxx.obj: +@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.cxx.lo: +@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-libtiffincludeHEADERS: $(libtiffinclude_HEADERS) + @$(NORMAL_INSTALL) + @list='$(libtiffinclude_HEADERS)'; test -n "$(libtiffincludedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(libtiffincludedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libtiffincludedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libtiffincludedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(libtiffincludedir)" || exit $$?; \ + done + +uninstall-libtiffincludeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(libtiffinclude_HEADERS)'; test -n "$(libtiffincludedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(libtiffincludedir)'; $(am__uninstall_files_from_dir) +install-nodist_libtiffincludeHEADERS: $(nodist_libtiffinclude_HEADERS) + @$(NORMAL_INSTALL) + @list='$(nodist_libtiffinclude_HEADERS)'; test -n "$(libtiffincludedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(libtiffincludedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libtiffincludedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libtiffincludedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(libtiffincludedir)" || exit $$?; \ + done + +uninstall-nodist_libtiffincludeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(nodist_libtiffinclude_HEADERS)'; test -n "$(libtiffincludedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(libtiffincludedir)'; $(am__uninstall_files_from_dir) + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) tif_config.h.in tiffconf.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) tif_config.h.in tiffconf.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) tif_config.h.in tiffconf.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) tif_config.h.in tiffconf.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS) tif_config.h \ + tiffconf.h +installdirs: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(libtiffincludedir)" "$(DESTDIR)$(libtiffincludedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ + clean-noinstPROGRAMS mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-libtiffincludeHEADERS \ + install-nodist_libtiffincludeHEADERS + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-libLTLIBRARIES uninstall-libtiffincludeHEADERS \ + uninstall-nodist_libtiffincludeHEADERS + +.MAKE: all install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libLTLIBRARIES clean-libtool clean-noinstPROGRAMS \ + cscopelist ctags distclean distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-libLTLIBRARIES \ + install-libtiffincludeHEADERS install-man \ + install-nodist_libtiffincludeHEADERS install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-libLTLIBRARIES \ + uninstall-libtiffincludeHEADERS \ + uninstall-nodist_libtiffincludeHEADERS + + +faxtable: mkg3states + (rm -f tif_fax3sm.c && ./mkg3states -b -c const tif_fax3sm.c) + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/Makefile.vc b/src/SDL2/external/tiff-4.0.3/libtiff/Makefile.vc new file mode 100644 index 000000000..42792ba13 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/Makefile.vc @@ -0,0 +1,102 @@ +# $Id: Makefile.vc,v 1.22 2009-06-23 18:25:43 fwarmerdam Exp $ +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. +# +# Makefile for MS Visual C and Watcom C compilers. +# +# To build: +# C:\libtiff\libtiff> nmake /f makefile.vc all +# + +!INCLUDE ..\nmake.opt + +INCL = -I. $(JPEG_INCLUDE) $(ZLIB_INCLUDE) $(JBIG_INCLUDE) + +!IFDEF USE_WIN_CRT_LIB +OBJ_SYSDEP_MODULE = tif_unix.obj +!ELSE +OBJ_SYSDEP_MODULE = tif_win32.obj +!ENDIF + +OBJ = \ + tif_aux.obj \ + tif_close.obj \ + tif_codec.obj \ + tif_color.obj \ + tif_compress.obj \ + tif_dir.obj \ + tif_dirinfo.obj \ + tif_dirread.obj \ + tif_dirwrite.obj \ + tif_dumpmode.obj \ + tif_error.obj \ + tif_extension.obj \ + tif_fax3.obj \ + tif_fax3sm.obj \ + tif_getimage.obj \ + tif_jbig.obj \ + tif_jpeg.obj \ + tif_jpeg_12.obj \ + tif_ojpeg.obj \ + tif_flush.obj \ + tif_luv.obj \ + tif_lzw.obj \ + tif_next.obj \ + tif_open.obj \ + tif_packbits.obj \ + tif_pixarlog.obj \ + tif_predict.obj \ + tif_print.obj \ + tif_read.obj \ + tif_stream.obj \ + tif_swab.obj \ + tif_strip.obj \ + tif_thunder.obj \ + tif_tile.obj \ + tif_version.obj \ + tif_warning.obj \ + tif_write.obj \ + tif_zip.obj \ + $(OBJ_SYSDEP_MODULE) + +all: libtiff.lib $(DLLNAME) + +tif_config.h: tif_config.vc.h + copy tif_config.vc.h tif_config.h + +tiffconf.h: tiffconf.vc.h + copy tiffconf.vc.h tiffconf.h + +libtiff.lib: tif_config.h tiffconf.h $(OBJ) + $(AR) /out:libtiff.lib $(OBJ) $(LIBS) + +$(DLLNAME): tif_config.h tiffconf.h libtiff.def $(OBJ) + $(LD) /debug /dll /def:libtiff.def /out:$(DLLNAME) \ + /implib:libtiff_i.lib $(OBJ) $(LIBS) + +clean: + -del tif_config.h tiffconf.h + -del *.obj + -del *.lib + -del *.dll + -del *.dll.manifest + -del *.pdb diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/SConstruct b/src/SDL2/external/tiff-4.0.3/libtiff/SConstruct new file mode 100644 index 000000000..cb6a7cc95 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/SConstruct @@ -0,0 +1,73 @@ +# $Id: SConstruct,v 1.4 2007/02/24 15:03:50 dron Exp $ + +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2005, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# This file contains rules to build software with the SCons tool +# (see the http://www.scons.org/ for details on SCons). + +# Import globally defined options +Import([ 'env', 'idir_lib' ]) + +SRCS = [ \ + 'tif_aux.c', \ + 'tif_close.c', \ + 'tif_codec.c', \ + 'tif_color.c', \ + 'tif_compress.c', \ + 'tif_dir.c', \ + 'tif_dirinfo.c', \ + 'tif_dirread.c', \ + 'tif_dirwrite.c', \ + 'tif_dumpmode.c', \ + 'tif_error.c', \ + 'tif_extension.c', \ + 'tif_fax3.c', \ + 'tif_fax3sm.c', \ + 'tif_flush.c', \ + 'tif_getimage.c', \ + 'tif_jbig.c', \ + 'tif_jpeg.c', \ + 'tif_luv.c', \ + 'tif_lzw.c', \ + 'tif_next.c', \ + 'tif_ojpeg.c', \ + 'tif_open.c', \ + 'tif_packbits.c', \ + 'tif_pixarlog.c', \ + 'tif_predict.c', \ + 'tif_print.c', \ + 'tif_read.c', \ + 'tif_strip.c', \ + 'tif_swab.c', \ + 'tif_thunder.c', \ + 'tif_tile.c', \ + 'tif_unix.c', \ + 'tif_version.c', \ + 'tif_warning.c', \ + 'tif_write.c', \ + 'tif_zip.c' ] + +StaticLibrary('tiff', SRCS) +SharedLibrary('tiff', SRCS) + diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/libtiff.def b/src/SDL2/external/tiff-4.0.3/libtiff/libtiff.def new file mode 100644 index 000000000..892ad23e0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/libtiff.def @@ -0,0 +1,158 @@ +EXPORTS TIFFOpen + TIFFOpenW + TIFFGetVersion + TIFFCleanup + TIFFClose + TIFFFlush + TIFFFlushData + TIFFGetField + TIFFVGetField + TIFFGetFieldDefaulted + TIFFVGetFieldDefaulted + TIFFGetTagListEntry + TIFFGetTagListCount + TIFFReadDirectory + TIFFScanlineSize64 + TIFFScanlineSize + TIFFStripSize64 + TIFFStripSize + TIFFVStripSize64 + TIFFVStripSize + TIFFRawStripSize64 + TIFFRawStripSize + TIFFTileRowSize64 + TIFFTileRowSize + TIFFTileSize64 + TIFFTileSize + TIFFVTileSize64 + TIFFVTileSize + TIFFFileno + TIFFSetFileno + TIFFGetMode + TIFFIsTiled + TIFFIsByteSwapped + TIFFIsBigEndian + TIFFIsMSB2LSB + TIFFIsUpSampled + TIFFCIELabToRGBInit + TIFFCIELabToXYZ + TIFFXYZToRGB + TIFFYCbCrToRGBInit + TIFFYCbCrtoRGB + TIFFCurrentRow + TIFFCurrentDirectory + TIFFCurrentStrip + TIFFCurrentTile + TIFFDataWidth + TIFFReadBufferSetup + TIFFWriteBufferSetup + TIFFSetupStrips + TIFFLastDirectory + TIFFSetDirectory + TIFFSetSubDirectory + TIFFUnlinkDirectory + TIFFSetField + TIFFVSetField + TIFFCheckpointDirectory + TIFFWriteDirectory + TIFFRewriteDirectory + TIFFPrintDirectory + TIFFReadScanline + TIFFWriteScanline + TIFFReadRGBAImage + TIFFReadRGBAImageOriented + TIFFFdOpen + TIFFClientOpen + TIFFFileName + TIFFError + TIFFErrorExt + TIFFWarning + TIFFWarningExt + TIFFSetErrorHandler + TIFFSetErrorHandlerExt + TIFFSetWarningHandler + TIFFSetWarningHandlerExt + TIFFComputeTile + TIFFCheckTile + TIFFNumberOfTiles + TIFFReadTile + TIFFWriteTile + TIFFComputeStrip + TIFFNumberOfStrips + TIFFRGBAImageBegin + TIFFRGBAImageGet + TIFFRGBAImageEnd + TIFFReadEncodedStrip + TIFFReadRawStrip + TIFFReadEncodedTile + TIFFReadRawTile + TIFFReadRGBATile + TIFFReadRGBAStrip + TIFFWriteEncodedStrip + TIFFWriteRawStrip + TIFFWriteEncodedTile + TIFFWriteRawTile + TIFFSetWriteOffset + TIFFSwabFloat + TIFFSwabDouble + TIFFSwabShort + TIFFSwabLong + TIFFSwabArrayOfShort + TIFFSwabArrayOfLong + TIFFSwabArrayOfFloat + TIFFSwabArrayOfDouble + TIFFSwabArrayOfTriples + TIFFReverseBits + TIFFGetBitRevTable + TIFFDefaultStripSize + TIFFDefaultTileSize + TIFFRasterScanlineSize64 + TIFFRasterScanlineSize + _TIFFmalloc + _TIFFrealloc + _TIFFfree + _TIFFmemset + _TIFFmemcpy + _TIFFmemcmp + _TIFFCheckMalloc + TIFFCreateDirectory + TIFFSetTagExtender + TIFFFieldWithName + TIFFFieldWithTag + TIFFFieldTag + TIFFFieldName + TIFFFieldDataType + TIFFFieldPassCount + TIFFFieldReadCount + TIFFFieldWriteCount + TIFFCurrentDirOffset + TIFFWriteCheck + TIFFRGBAImageOK + TIFFNumberOfDirectories + TIFFSetFileName + TIFFSetClientdata + TIFFSetMode + TIFFClientdata + TIFFGetReadProc + TIFFGetWriteProc + TIFFGetSeekProc + TIFFGetCloseProc + TIFFGetSizeProc + TIFFGetMapFileProc + TIFFGetUnmapFileProc + TIFFIsCODECConfigured + TIFFGetConfiguredCODECs + TIFFFindCODEC + TIFFRegisterCODEC + TIFFUnRegisterCODEC + TIFFFreeDirectory + TIFFReadCustomDirectory + TIFFReadEXIFDirectory + TIFFAccessTagMethods + TIFFGetClientInfo + TIFFSetClientInfo + TIFFSwabLong8 + TIFFSwabArrayOfLong8 + TIFFFindField + TIFFUnsetField + TIFFMergeFieldInfo diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/libtiff.map b/src/SDL2/external/tiff-4.0.3/libtiff/libtiff.map new file mode 100644 index 000000000..2fc177fd0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/libtiff.map @@ -0,0 +1,4 @@ +LIBTIFF_4.0 { + global: + *; +}; diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/libtiffxx.map b/src/SDL2/external/tiff-4.0.3/libtiff/libtiffxx.map new file mode 100644 index 000000000..e2f648f9e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/libtiffxx.map @@ -0,0 +1,4 @@ +LIBTIFFXX_4.0 { + global: + *; +}; diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/mkg3states.c b/src/SDL2/external/tiff-4.0.3/libtiff/mkg3states.c new file mode 100644 index 000000000..1df9ccc5f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/mkg3states.c @@ -0,0 +1,451 @@ +/* "$Id: mkg3states.c,v 1.11 2010-03-10 18:56:48 bfriesen Exp $ */ + +/* + * Copyright (c) 1991-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* Initialise fax decoder tables + * Decoder support is derived, with permission, from the code + * in Frank Cringle's viewfax program; + * Copyright (C) 1990, 1995 Frank D. Cringle. + */ +#include "tif_config.h" + +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#include "tif_fax3.h" + +#ifndef HAVE_GETOPT +extern int getopt(int, char**, char*); +#endif + +#define streq(a,b) (strcmp(a,b) == 0) + +/* NB: can't use names in tif_fax3.h 'cuz they are declared const */ +TIFFFaxTabEnt MainTable[128]; +TIFFFaxTabEnt WhiteTable[4096]; +TIFFFaxTabEnt BlackTable[8192]; + +struct proto { + uint16 code; /* right justified, lsb-first, zero filled */ + uint16 val; /* (pixel count)<<4 + code width */ +}; + +static struct proto Pass[] = { +{ 0x0008, 4 }, +{ 0, 0 } +}; + +static struct proto Horiz[] = { +{ 0x0004, 3 }, +{ 0, 0 } +}; + +static struct proto V0[] = { +{ 0x0001, 1 }, +{ 0, 0 } +}; + +static struct proto VR[] = { +{ 0x0006, (1<<4)+3 }, +{ 0x0030, (2<<4)+6 }, +{ 0x0060, (3<<4)+7 }, +{ 0, 0 } +}; + +static struct proto VL[] = { +{ 0x0002, (1<<4)+3 }, +{ 0x0010, (2<<4)+6 }, +{ 0x0020, (3<<4)+7 }, +{ 0, 0 } +}; + +static struct proto Ext[] = { +{ 0x0040, 7 }, +{ 0, 0 } +}; + +static struct proto EOLV[] = { +{ 0x0000, 7 }, +{ 0, 0 } +}; + +static struct proto MakeUpW[] = { +{ 0x001b, 1029 }, +{ 0x0009, 2053 }, +{ 0x003a, 3078 }, +{ 0x0076, 4103 }, +{ 0x006c, 5128 }, +{ 0x00ec, 6152 }, +{ 0x0026, 7176 }, +{ 0x00a6, 8200 }, +{ 0x0016, 9224 }, +{ 0x00e6, 10248 }, +{ 0x0066, 11273 }, +{ 0x0166, 12297 }, +{ 0x0096, 13321 }, +{ 0x0196, 14345 }, +{ 0x0056, 15369 }, +{ 0x0156, 16393 }, +{ 0x00d6, 17417 }, +{ 0x01d6, 18441 }, +{ 0x0036, 19465 }, +{ 0x0136, 20489 }, +{ 0x00b6, 21513 }, +{ 0x01b6, 22537 }, +{ 0x0032, 23561 }, +{ 0x0132, 24585 }, +{ 0x00b2, 25609 }, +{ 0x0006, 26630 }, +{ 0x01b2, 27657 }, +{ 0, 0 } +}; + +static struct proto MakeUpB[] = { +{ 0x03c0, 1034 }, +{ 0x0130, 2060 }, +{ 0x0930, 3084 }, +{ 0x0da0, 4108 }, +{ 0x0cc0, 5132 }, +{ 0x02c0, 6156 }, +{ 0x0ac0, 7180 }, +{ 0x06c0, 8205 }, +{ 0x16c0, 9229 }, +{ 0x0a40, 10253 }, +{ 0x1a40, 11277 }, +{ 0x0640, 12301 }, +{ 0x1640, 13325 }, +{ 0x09c0, 14349 }, +{ 0x19c0, 15373 }, +{ 0x05c0, 16397 }, +{ 0x15c0, 17421 }, +{ 0x0dc0, 18445 }, +{ 0x1dc0, 19469 }, +{ 0x0940, 20493 }, +{ 0x1940, 21517 }, +{ 0x0540, 22541 }, +{ 0x1540, 23565 }, +{ 0x0b40, 24589 }, +{ 0x1b40, 25613 }, +{ 0x04c0, 26637 }, +{ 0x14c0, 27661 }, +{ 0, 0 } +}; + +static struct proto MakeUp[] = { +{ 0x0080, 28683 }, +{ 0x0180, 29707 }, +{ 0x0580, 30731 }, +{ 0x0480, 31756 }, +{ 0x0c80, 32780 }, +{ 0x0280, 33804 }, +{ 0x0a80, 34828 }, +{ 0x0680, 35852 }, +{ 0x0e80, 36876 }, +{ 0x0380, 37900 }, +{ 0x0b80, 38924 }, +{ 0x0780, 39948 }, +{ 0x0f80, 40972 }, +{ 0, 0 } +}; + +static struct proto TermW[] = { +{ 0x00ac, 8 }, +{ 0x0038, 22 }, +{ 0x000e, 36 }, +{ 0x0001, 52 }, +{ 0x000d, 68 }, +{ 0x0003, 84 }, +{ 0x0007, 100 }, +{ 0x000f, 116 }, +{ 0x0019, 133 }, +{ 0x0005, 149 }, +{ 0x001c, 165 }, +{ 0x0002, 181 }, +{ 0x0004, 198 }, +{ 0x0030, 214 }, +{ 0x000b, 230 }, +{ 0x002b, 246 }, +{ 0x0015, 262 }, +{ 0x0035, 278 }, +{ 0x0072, 295 }, +{ 0x0018, 311 }, +{ 0x0008, 327 }, +{ 0x0074, 343 }, +{ 0x0060, 359 }, +{ 0x0010, 375 }, +{ 0x000a, 391 }, +{ 0x006a, 407 }, +{ 0x0064, 423 }, +{ 0x0012, 439 }, +{ 0x000c, 455 }, +{ 0x0040, 472 }, +{ 0x00c0, 488 }, +{ 0x0058, 504 }, +{ 0x00d8, 520 }, +{ 0x0048, 536 }, +{ 0x00c8, 552 }, +{ 0x0028, 568 }, +{ 0x00a8, 584 }, +{ 0x0068, 600 }, +{ 0x00e8, 616 }, +{ 0x0014, 632 }, +{ 0x0094, 648 }, +{ 0x0054, 664 }, +{ 0x00d4, 680 }, +{ 0x0034, 696 }, +{ 0x00b4, 712 }, +{ 0x0020, 728 }, +{ 0x00a0, 744 }, +{ 0x0050, 760 }, +{ 0x00d0, 776 }, +{ 0x004a, 792 }, +{ 0x00ca, 808 }, +{ 0x002a, 824 }, +{ 0x00aa, 840 }, +{ 0x0024, 856 }, +{ 0x00a4, 872 }, +{ 0x001a, 888 }, +{ 0x009a, 904 }, +{ 0x005a, 920 }, +{ 0x00da, 936 }, +{ 0x0052, 952 }, +{ 0x00d2, 968 }, +{ 0x004c, 984 }, +{ 0x00cc, 1000 }, +{ 0x002c, 1016 }, +{ 0, 0 } +}; + +static struct proto TermB[] = { +{ 0x03b0, 10 }, +{ 0x0002, 19 }, +{ 0x0003, 34 }, +{ 0x0001, 50 }, +{ 0x0006, 67 }, +{ 0x000c, 84 }, +{ 0x0004, 100 }, +{ 0x0018, 117 }, +{ 0x0028, 134 }, +{ 0x0008, 150 }, +{ 0x0010, 167 }, +{ 0x0050, 183 }, +{ 0x0070, 199 }, +{ 0x0020, 216 }, +{ 0x00e0, 232 }, +{ 0x0030, 249 }, +{ 0x03a0, 266 }, +{ 0x0060, 282 }, +{ 0x0040, 298 }, +{ 0x0730, 315 }, +{ 0x00b0, 331 }, +{ 0x01b0, 347 }, +{ 0x0760, 363 }, +{ 0x00a0, 379 }, +{ 0x0740, 395 }, +{ 0x00c0, 411 }, +{ 0x0530, 428 }, +{ 0x0d30, 444 }, +{ 0x0330, 460 }, +{ 0x0b30, 476 }, +{ 0x0160, 492 }, +{ 0x0960, 508 }, +{ 0x0560, 524 }, +{ 0x0d60, 540 }, +{ 0x04b0, 556 }, +{ 0x0cb0, 572 }, +{ 0x02b0, 588 }, +{ 0x0ab0, 604 }, +{ 0x06b0, 620 }, +{ 0x0eb0, 636 }, +{ 0x0360, 652 }, +{ 0x0b60, 668 }, +{ 0x05b0, 684 }, +{ 0x0db0, 700 }, +{ 0x02a0, 716 }, +{ 0x0aa0, 732 }, +{ 0x06a0, 748 }, +{ 0x0ea0, 764 }, +{ 0x0260, 780 }, +{ 0x0a60, 796 }, +{ 0x04a0, 812 }, +{ 0x0ca0, 828 }, +{ 0x0240, 844 }, +{ 0x0ec0, 860 }, +{ 0x01c0, 876 }, +{ 0x0e40, 892 }, +{ 0x0140, 908 }, +{ 0x01a0, 924 }, +{ 0x09a0, 940 }, +{ 0x0d40, 956 }, +{ 0x0340, 972 }, +{ 0x05a0, 988 }, +{ 0x0660, 1004 }, +{ 0x0e60, 1020 }, +{ 0, 0 } +}; + +static struct proto EOLH[] = { +{ 0x0000, 11 }, +{ 0, 0 } +}; + +static void +FillTable(TIFFFaxTabEnt *T, int Size, struct proto *P, int State) +{ + int limit = 1 << Size; + + while (P->val) { + int width = P->val & 15; + int param = P->val >> 4; + int incr = 1 << width; + int code; + for (code = P->code; code < limit; code += incr) { + TIFFFaxTabEnt *E = T+code; + E->State = State; + E->Width = width; + E->Param = param; + } + P++; + } +} + +static char* storage_class = ""; +static char* const_class = ""; +static int packoutput = 1; +static char* prebrace = ""; +static char* postbrace = ""; + +void +WriteTable(FILE* fd, const TIFFFaxTabEnt* T, int Size, const char* name) +{ + int i; + char* sep; + + fprintf(fd, "%s %s TIFFFaxTabEnt %s[%d] = {", + storage_class, const_class, name, Size); + if (packoutput) { + sep = "\n"; + for (i = 0; i < Size; i++) { + fprintf(fd, "%s%s%d,%d,%d%s", + sep, prebrace, T->State, T->Width, (int) T->Param, postbrace); + if (((i+1) % 10) == 0) + sep = ",\n"; + else + sep = ","; + T++; + } + } else { + sep = "\n "; + for (i = 0; i < Size; i++) { + fprintf(fd, "%s%s%3d,%3d,%4d%s", + sep, prebrace, T->State, T->Width, (int) T->Param, postbrace); + if (((i+1) % 6) == 0) + sep = ",\n "; + else + sep = ","; + T++; + } + } + fprintf(fd, "\n};\n"); +} + +/* initialise the huffman code tables */ +int +main(int argc, char* argv[]) +{ + FILE* fd; + char* outputfile; + int c; + extern int optind; + extern char* optarg; + + while ((c = getopt(argc, argv, "c:s:bp")) != -1) + switch (c) { + case 'c': + const_class = optarg; + break; + case 's': + storage_class = optarg; + break; + case 'p': + packoutput = 0; + break; + case 'b': + prebrace = "{"; + postbrace = "}"; + break; + case '?': + fprintf(stderr, + "usage: %s [-c const] [-s storage] [-p] [-b] file\n", + argv[0]); + return (-1); + } + outputfile = optind < argc ? argv[optind] : "g3states.h"; + fd = fopen(outputfile, "w"); + if (fd == NULL) { + fprintf(stderr, "%s: %s: Cannot create output file.\n", + argv[0], outputfile); + return (-2); + } + FillTable(MainTable, 7, Pass, S_Pass); + FillTable(MainTable, 7, Horiz, S_Horiz); + FillTable(MainTable, 7, V0, S_V0); + FillTable(MainTable, 7, VR, S_VR); + FillTable(MainTable, 7, VL, S_VL); + FillTable(MainTable, 7, Ext, S_Ext); + FillTable(MainTable, 7, EOLV, S_EOL); + FillTable(WhiteTable, 12, MakeUpW, S_MakeUpW); + FillTable(WhiteTable, 12, MakeUp, S_MakeUp); + FillTable(WhiteTable, 12, TermW, S_TermW); + FillTable(WhiteTable, 12, EOLH, S_EOL); + FillTable(BlackTable, 13, MakeUpB, S_MakeUpB); + FillTable(BlackTable, 13, MakeUp, S_MakeUp); + FillTable(BlackTable, 13, TermB, S_TermB); + FillTable(BlackTable, 13, EOLH, S_EOL); + + fprintf(fd, "/* WARNING, this file was automatically generated by the\n"); + fprintf(fd, " mkg3states program */\n"); + fprintf(fd, "#include \"tiff.h\"\n"); + fprintf(fd, "#include \"tif_fax3.h\"\n"); + WriteTable(fd, MainTable, 128, "TIFFFaxMainTable"); + WriteTable(fd, WhiteTable, 4096, "TIFFFaxWhiteTable"); + WriteTable(fd, BlackTable, 8192, "TIFFFaxBlackTable"); + fclose(fd); + return (0); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/t4.h b/src/SDL2/external/tiff-4.0.3/libtiff/t4.h new file mode 100644 index 000000000..b908f54f0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/t4.h @@ -0,0 +1,292 @@ +/* $Id: t4.h,v 1.3 2010-03-10 18:56:48 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _T4_ +#define _T4_ +/* + * CCITT T.4 1D Huffman runlength codes and + * related definitions. Given the small sizes + * of these tables it does not seem + * worthwhile to make code & length 8 bits. + */ +typedef struct tableentry { + unsigned short length; /* bit length of g3 code */ + unsigned short code; /* g3 code */ + short runlen; /* run length in bits */ +} tableentry; + +#define EOL 0x001 /* EOL code value - 0000 0000 0000 1 */ + +/* status values returned instead of a run length */ +#define G3CODE_EOL -1 /* NB: ACT_EOL - ACT_WRUNT */ +#define G3CODE_INVALID -2 /* NB: ACT_INVALID - ACT_WRUNT */ +#define G3CODE_EOF -3 /* end of input data */ +#define G3CODE_INCOMP -4 /* incomplete run code */ + +/* + * Note that these tables are ordered such that the + * index into the table is known to be either the + * run length, or (run length / 64) + a fixed offset. + * + * NB: The G3CODE_INVALID entries are only used + * during state generation (see mkg3states.c). + */ +#ifdef G3CODES +const tableentry TIFFFaxWhiteCodes[] = { + { 8, 0x35, 0 }, /* 0011 0101 */ + { 6, 0x7, 1 }, /* 0001 11 */ + { 4, 0x7, 2 }, /* 0111 */ + { 4, 0x8, 3 }, /* 1000 */ + { 4, 0xB, 4 }, /* 1011 */ + { 4, 0xC, 5 }, /* 1100 */ + { 4, 0xE, 6 }, /* 1110 */ + { 4, 0xF, 7 }, /* 1111 */ + { 5, 0x13, 8 }, /* 1001 1 */ + { 5, 0x14, 9 }, /* 1010 0 */ + { 5, 0x7, 10 }, /* 0011 1 */ + { 5, 0x8, 11 }, /* 0100 0 */ + { 6, 0x8, 12 }, /* 0010 00 */ + { 6, 0x3, 13 }, /* 0000 11 */ + { 6, 0x34, 14 }, /* 1101 00 */ + { 6, 0x35, 15 }, /* 1101 01 */ + { 6, 0x2A, 16 }, /* 1010 10 */ + { 6, 0x2B, 17 }, /* 1010 11 */ + { 7, 0x27, 18 }, /* 0100 111 */ + { 7, 0xC, 19 }, /* 0001 100 */ + { 7, 0x8, 20 }, /* 0001 000 */ + { 7, 0x17, 21 }, /* 0010 111 */ + { 7, 0x3, 22 }, /* 0000 011 */ + { 7, 0x4, 23 }, /* 0000 100 */ + { 7, 0x28, 24 }, /* 0101 000 */ + { 7, 0x2B, 25 }, /* 0101 011 */ + { 7, 0x13, 26 }, /* 0010 011 */ + { 7, 0x24, 27 }, /* 0100 100 */ + { 7, 0x18, 28 }, /* 0011 000 */ + { 8, 0x2, 29 }, /* 0000 0010 */ + { 8, 0x3, 30 }, /* 0000 0011 */ + { 8, 0x1A, 31 }, /* 0001 1010 */ + { 8, 0x1B, 32 }, /* 0001 1011 */ + { 8, 0x12, 33 }, /* 0001 0010 */ + { 8, 0x13, 34 }, /* 0001 0011 */ + { 8, 0x14, 35 }, /* 0001 0100 */ + { 8, 0x15, 36 }, /* 0001 0101 */ + { 8, 0x16, 37 }, /* 0001 0110 */ + { 8, 0x17, 38 }, /* 0001 0111 */ + { 8, 0x28, 39 }, /* 0010 1000 */ + { 8, 0x29, 40 }, /* 0010 1001 */ + { 8, 0x2A, 41 }, /* 0010 1010 */ + { 8, 0x2B, 42 }, /* 0010 1011 */ + { 8, 0x2C, 43 }, /* 0010 1100 */ + { 8, 0x2D, 44 }, /* 0010 1101 */ + { 8, 0x4, 45 }, /* 0000 0100 */ + { 8, 0x5, 46 }, /* 0000 0101 */ + { 8, 0xA, 47 }, /* 0000 1010 */ + { 8, 0xB, 48 }, /* 0000 1011 */ + { 8, 0x52, 49 }, /* 0101 0010 */ + { 8, 0x53, 50 }, /* 0101 0011 */ + { 8, 0x54, 51 }, /* 0101 0100 */ + { 8, 0x55, 52 }, /* 0101 0101 */ + { 8, 0x24, 53 }, /* 0010 0100 */ + { 8, 0x25, 54 }, /* 0010 0101 */ + { 8, 0x58, 55 }, /* 0101 1000 */ + { 8, 0x59, 56 }, /* 0101 1001 */ + { 8, 0x5A, 57 }, /* 0101 1010 */ + { 8, 0x5B, 58 }, /* 0101 1011 */ + { 8, 0x4A, 59 }, /* 0100 1010 */ + { 8, 0x4B, 60 }, /* 0100 1011 */ + { 8, 0x32, 61 }, /* 0011 0010 */ + { 8, 0x33, 62 }, /* 0011 0011 */ + { 8, 0x34, 63 }, /* 0011 0100 */ + { 5, 0x1B, 64 }, /* 1101 1 */ + { 5, 0x12, 128 }, /* 1001 0 */ + { 6, 0x17, 192 }, /* 0101 11 */ + { 7, 0x37, 256 }, /* 0110 111 */ + { 8, 0x36, 320 }, /* 0011 0110 */ + { 8, 0x37, 384 }, /* 0011 0111 */ + { 8, 0x64, 448 }, /* 0110 0100 */ + { 8, 0x65, 512 }, /* 0110 0101 */ + { 8, 0x68, 576 }, /* 0110 1000 */ + { 8, 0x67, 640 }, /* 0110 0111 */ + { 9, 0xCC, 704 }, /* 0110 0110 0 */ + { 9, 0xCD, 768 }, /* 0110 0110 1 */ + { 9, 0xD2, 832 }, /* 0110 1001 0 */ + { 9, 0xD3, 896 }, /* 0110 1001 1 */ + { 9, 0xD4, 960 }, /* 0110 1010 0 */ + { 9, 0xD5, 1024 }, /* 0110 1010 1 */ + { 9, 0xD6, 1088 }, /* 0110 1011 0 */ + { 9, 0xD7, 1152 }, /* 0110 1011 1 */ + { 9, 0xD8, 1216 }, /* 0110 1100 0 */ + { 9, 0xD9, 1280 }, /* 0110 1100 1 */ + { 9, 0xDA, 1344 }, /* 0110 1101 0 */ + { 9, 0xDB, 1408 }, /* 0110 1101 1 */ + { 9, 0x98, 1472 }, /* 0100 1100 0 */ + { 9, 0x99, 1536 }, /* 0100 1100 1 */ + { 9, 0x9A, 1600 }, /* 0100 1101 0 */ + { 6, 0x18, 1664 }, /* 0110 00 */ + { 9, 0x9B, 1728 }, /* 0100 1101 1 */ + { 11, 0x8, 1792 }, /* 0000 0001 000 */ + { 11, 0xC, 1856 }, /* 0000 0001 100 */ + { 11, 0xD, 1920 }, /* 0000 0001 101 */ + { 12, 0x12, 1984 }, /* 0000 0001 0010 */ + { 12, 0x13, 2048 }, /* 0000 0001 0011 */ + { 12, 0x14, 2112 }, /* 0000 0001 0100 */ + { 12, 0x15, 2176 }, /* 0000 0001 0101 */ + { 12, 0x16, 2240 }, /* 0000 0001 0110 */ + { 12, 0x17, 2304 }, /* 0000 0001 0111 */ + { 12, 0x1C, 2368 }, /* 0000 0001 1100 */ + { 12, 0x1D, 2432 }, /* 0000 0001 1101 */ + { 12, 0x1E, 2496 }, /* 0000 0001 1110 */ + { 12, 0x1F, 2560 }, /* 0000 0001 1111 */ + { 12, 0x1, G3CODE_EOL }, /* 0000 0000 0001 */ + { 9, 0x1, G3CODE_INVALID }, /* 0000 0000 1 */ + { 10, 0x1, G3CODE_INVALID }, /* 0000 0000 01 */ + { 11, 0x1, G3CODE_INVALID }, /* 0000 0000 001 */ + { 12, 0x0, G3CODE_INVALID }, /* 0000 0000 0000 */ +}; + +const tableentry TIFFFaxBlackCodes[] = { + { 10, 0x37, 0 }, /* 0000 1101 11 */ + { 3, 0x2, 1 }, /* 010 */ + { 2, 0x3, 2 }, /* 11 */ + { 2, 0x2, 3 }, /* 10 */ + { 3, 0x3, 4 }, /* 011 */ + { 4, 0x3, 5 }, /* 0011 */ + { 4, 0x2, 6 }, /* 0010 */ + { 5, 0x3, 7 }, /* 0001 1 */ + { 6, 0x5, 8 }, /* 0001 01 */ + { 6, 0x4, 9 }, /* 0001 00 */ + { 7, 0x4, 10 }, /* 0000 100 */ + { 7, 0x5, 11 }, /* 0000 101 */ + { 7, 0x7, 12 }, /* 0000 111 */ + { 8, 0x4, 13 }, /* 0000 0100 */ + { 8, 0x7, 14 }, /* 0000 0111 */ + { 9, 0x18, 15 }, /* 0000 1100 0 */ + { 10, 0x17, 16 }, /* 0000 0101 11 */ + { 10, 0x18, 17 }, /* 0000 0110 00 */ + { 10, 0x8, 18 }, /* 0000 0010 00 */ + { 11, 0x67, 19 }, /* 0000 1100 111 */ + { 11, 0x68, 20 }, /* 0000 1101 000 */ + { 11, 0x6C, 21 }, /* 0000 1101 100 */ + { 11, 0x37, 22 }, /* 0000 0110 111 */ + { 11, 0x28, 23 }, /* 0000 0101 000 */ + { 11, 0x17, 24 }, /* 0000 0010 111 */ + { 11, 0x18, 25 }, /* 0000 0011 000 */ + { 12, 0xCA, 26 }, /* 0000 1100 1010 */ + { 12, 0xCB, 27 }, /* 0000 1100 1011 */ + { 12, 0xCC, 28 }, /* 0000 1100 1100 */ + { 12, 0xCD, 29 }, /* 0000 1100 1101 */ + { 12, 0x68, 30 }, /* 0000 0110 1000 */ + { 12, 0x69, 31 }, /* 0000 0110 1001 */ + { 12, 0x6A, 32 }, /* 0000 0110 1010 */ + { 12, 0x6B, 33 }, /* 0000 0110 1011 */ + { 12, 0xD2, 34 }, /* 0000 1101 0010 */ + { 12, 0xD3, 35 }, /* 0000 1101 0011 */ + { 12, 0xD4, 36 }, /* 0000 1101 0100 */ + { 12, 0xD5, 37 }, /* 0000 1101 0101 */ + { 12, 0xD6, 38 }, /* 0000 1101 0110 */ + { 12, 0xD7, 39 }, /* 0000 1101 0111 */ + { 12, 0x6C, 40 }, /* 0000 0110 1100 */ + { 12, 0x6D, 41 }, /* 0000 0110 1101 */ + { 12, 0xDA, 42 }, /* 0000 1101 1010 */ + { 12, 0xDB, 43 }, /* 0000 1101 1011 */ + { 12, 0x54, 44 }, /* 0000 0101 0100 */ + { 12, 0x55, 45 }, /* 0000 0101 0101 */ + { 12, 0x56, 46 }, /* 0000 0101 0110 */ + { 12, 0x57, 47 }, /* 0000 0101 0111 */ + { 12, 0x64, 48 }, /* 0000 0110 0100 */ + { 12, 0x65, 49 }, /* 0000 0110 0101 */ + { 12, 0x52, 50 }, /* 0000 0101 0010 */ + { 12, 0x53, 51 }, /* 0000 0101 0011 */ + { 12, 0x24, 52 }, /* 0000 0010 0100 */ + { 12, 0x37, 53 }, /* 0000 0011 0111 */ + { 12, 0x38, 54 }, /* 0000 0011 1000 */ + { 12, 0x27, 55 }, /* 0000 0010 0111 */ + { 12, 0x28, 56 }, /* 0000 0010 1000 */ + { 12, 0x58, 57 }, /* 0000 0101 1000 */ + { 12, 0x59, 58 }, /* 0000 0101 1001 */ + { 12, 0x2B, 59 }, /* 0000 0010 1011 */ + { 12, 0x2C, 60 }, /* 0000 0010 1100 */ + { 12, 0x5A, 61 }, /* 0000 0101 1010 */ + { 12, 0x66, 62 }, /* 0000 0110 0110 */ + { 12, 0x67, 63 }, /* 0000 0110 0111 */ + { 10, 0xF, 64 }, /* 0000 0011 11 */ + { 12, 0xC8, 128 }, /* 0000 1100 1000 */ + { 12, 0xC9, 192 }, /* 0000 1100 1001 */ + { 12, 0x5B, 256 }, /* 0000 0101 1011 */ + { 12, 0x33, 320 }, /* 0000 0011 0011 */ + { 12, 0x34, 384 }, /* 0000 0011 0100 */ + { 12, 0x35, 448 }, /* 0000 0011 0101 */ + { 13, 0x6C, 512 }, /* 0000 0011 0110 0 */ + { 13, 0x6D, 576 }, /* 0000 0011 0110 1 */ + { 13, 0x4A, 640 }, /* 0000 0010 0101 0 */ + { 13, 0x4B, 704 }, /* 0000 0010 0101 1 */ + { 13, 0x4C, 768 }, /* 0000 0010 0110 0 */ + { 13, 0x4D, 832 }, /* 0000 0010 0110 1 */ + { 13, 0x72, 896 }, /* 0000 0011 1001 0 */ + { 13, 0x73, 960 }, /* 0000 0011 1001 1 */ + { 13, 0x74, 1024 }, /* 0000 0011 1010 0 */ + { 13, 0x75, 1088 }, /* 0000 0011 1010 1 */ + { 13, 0x76, 1152 }, /* 0000 0011 1011 0 */ + { 13, 0x77, 1216 }, /* 0000 0011 1011 1 */ + { 13, 0x52, 1280 }, /* 0000 0010 1001 0 */ + { 13, 0x53, 1344 }, /* 0000 0010 1001 1 */ + { 13, 0x54, 1408 }, /* 0000 0010 1010 0 */ + { 13, 0x55, 1472 }, /* 0000 0010 1010 1 */ + { 13, 0x5A, 1536 }, /* 0000 0010 1101 0 */ + { 13, 0x5B, 1600 }, /* 0000 0010 1101 1 */ + { 13, 0x64, 1664 }, /* 0000 0011 0010 0 */ + { 13, 0x65, 1728 }, /* 0000 0011 0010 1 */ + { 11, 0x8, 1792 }, /* 0000 0001 000 */ + { 11, 0xC, 1856 }, /* 0000 0001 100 */ + { 11, 0xD, 1920 }, /* 0000 0001 101 */ + { 12, 0x12, 1984 }, /* 0000 0001 0010 */ + { 12, 0x13, 2048 }, /* 0000 0001 0011 */ + { 12, 0x14, 2112 }, /* 0000 0001 0100 */ + { 12, 0x15, 2176 }, /* 0000 0001 0101 */ + { 12, 0x16, 2240 }, /* 0000 0001 0110 */ + { 12, 0x17, 2304 }, /* 0000 0001 0111 */ + { 12, 0x1C, 2368 }, /* 0000 0001 1100 */ + { 12, 0x1D, 2432 }, /* 0000 0001 1101 */ + { 12, 0x1E, 2496 }, /* 0000 0001 1110 */ + { 12, 0x1F, 2560 }, /* 0000 0001 1111 */ + { 12, 0x1, G3CODE_EOL }, /* 0000 0000 0001 */ + { 9, 0x1, G3CODE_INVALID }, /* 0000 0000 1 */ + { 10, 0x1, G3CODE_INVALID }, /* 0000 0000 01 */ + { 11, 0x1, G3CODE_INVALID }, /* 0000 0000 001 */ + { 12, 0x0, G3CODE_INVALID }, /* 0000 0000 0000 */ +}; +#else +extern const tableentry TIFFFaxWhiteCodes[]; +extern const tableentry TIFFFaxBlackCodes[]; +#endif +#endif /* _T4_ */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_aux.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_aux.c new file mode 100644 index 000000000..927150a49 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_aux.c @@ -0,0 +1,358 @@ +/* $Id: tif_aux.c,v 1.26 2010-07-01 15:33:28 dron Exp $ */ + +/* + * Copyright (c) 1991-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * Auxiliary Support Routines. + */ +#include "tiffiop.h" +#include "tif_predict.h" +#include + +uint32 +_TIFFMultiply32(TIFF* tif, uint32 first, uint32 second, const char* where) +{ + uint32 bytes = first * second; + + if (second && bytes / second != first) { + TIFFErrorExt(tif->tif_clientdata, where, "Integer overflow in %s", where); + bytes = 0; + } + + return bytes; +} + +uint64 +_TIFFMultiply64(TIFF* tif, uint64 first, uint64 second, const char* where) +{ + uint64 bytes = first * second; + + if (second && bytes / second != first) { + TIFFErrorExt(tif->tif_clientdata, where, "Integer overflow in %s", where); + bytes = 0; + } + + return bytes; +} + +void* +_TIFFCheckRealloc(TIFF* tif, void* buffer, + tmsize_t nmemb, tmsize_t elem_size, const char* what) +{ + void* cp = NULL; + tmsize_t bytes = nmemb * elem_size; + + /* + * XXX: Check for integer overflow. + */ + if (nmemb && elem_size && bytes / elem_size == nmemb) + cp = _TIFFrealloc(buffer, bytes); + + if (cp == NULL) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "Failed to allocate memory for %s " + "(%ld elements of %ld bytes each)", + what,(long) nmemb, (long) elem_size); + } + + return cp; +} + +void* +_TIFFCheckMalloc(TIFF* tif, tmsize_t nmemb, tmsize_t elem_size, const char* what) +{ + return _TIFFCheckRealloc(tif, NULL, nmemb, elem_size, what); +} + +static int +TIFFDefaultTransferFunction(TIFFDirectory* td) +{ + uint16 **tf = td->td_transferfunction; + tmsize_t i, n, nbytes; + + tf[0] = tf[1] = tf[2] = 0; + if (td->td_bitspersample >= sizeof(tmsize_t) * 8 - 2) + return 0; + + n = ((tmsize_t)1)<td_bitspersample; + nbytes = n * sizeof (uint16); + if (!(tf[0] = (uint16 *)_TIFFmalloc(nbytes))) + return 0; + tf[0][0] = 0; + for (i = 1; i < n; i++) { + double t = (double)i/((double) n-1.); + tf[0][i] = (uint16)floor(65535.*pow(t, 2.2) + .5); + } + + if (td->td_samplesperpixel - td->td_extrasamples > 1) { + if (!(tf[1] = (uint16 *)_TIFFmalloc(nbytes))) + goto bad; + _TIFFmemcpy(tf[1], tf[0], nbytes); + if (!(tf[2] = (uint16 *)_TIFFmalloc(nbytes))) + goto bad; + _TIFFmemcpy(tf[2], tf[0], nbytes); + } + return 1; + +bad: + if (tf[0]) + _TIFFfree(tf[0]); + if (tf[1]) + _TIFFfree(tf[1]); + if (tf[2]) + _TIFFfree(tf[2]); + tf[0] = tf[1] = tf[2] = 0; + return 0; +} + +static int +TIFFDefaultRefBlackWhite(TIFFDirectory* td) +{ + int i; + + if (!(td->td_refblackwhite = (float *)_TIFFmalloc(6*sizeof (float)))) + return 0; + if (td->td_photometric == PHOTOMETRIC_YCBCR) { + /* + * YCbCr (Class Y) images must have the ReferenceBlackWhite + * tag set. Fix the broken images, which lacks that tag. + */ + td->td_refblackwhite[0] = 0.0F; + td->td_refblackwhite[1] = td->td_refblackwhite[3] = + td->td_refblackwhite[5] = 255.0F; + td->td_refblackwhite[2] = td->td_refblackwhite[4] = 128.0F; + } else { + /* + * Assume RGB (Class R) + */ + for (i = 0; i < 3; i++) { + td->td_refblackwhite[2*i+0] = 0; + td->td_refblackwhite[2*i+1] = + (float)((1L<td_bitspersample)-1L); + } + } + return 1; +} + +/* + * Like TIFFGetField, but return any default + * value if the tag is not present in the directory. + * + * NB: We use the value in the directory, rather than + * explcit values so that defaults exist only one + * place in the library -- in TIFFDefaultDirectory. + */ +int +TIFFVGetFieldDefaulted(TIFF* tif, uint32 tag, va_list ap) +{ + TIFFDirectory *td = &tif->tif_dir; + + if (TIFFVGetField(tif, tag, ap)) + return (1); + switch (tag) { + case TIFFTAG_SUBFILETYPE: + *va_arg(ap, uint32 *) = td->td_subfiletype; + return (1); + case TIFFTAG_BITSPERSAMPLE: + *va_arg(ap, uint16 *) = td->td_bitspersample; + return (1); + case TIFFTAG_THRESHHOLDING: + *va_arg(ap, uint16 *) = td->td_threshholding; + return (1); + case TIFFTAG_FILLORDER: + *va_arg(ap, uint16 *) = td->td_fillorder; + return (1); + case TIFFTAG_ORIENTATION: + *va_arg(ap, uint16 *) = td->td_orientation; + return (1); + case TIFFTAG_SAMPLESPERPIXEL: + *va_arg(ap, uint16 *) = td->td_samplesperpixel; + return (1); + case TIFFTAG_ROWSPERSTRIP: + *va_arg(ap, uint32 *) = td->td_rowsperstrip; + return (1); + case TIFFTAG_MINSAMPLEVALUE: + *va_arg(ap, uint16 *) = td->td_minsamplevalue; + return (1); + case TIFFTAG_MAXSAMPLEVALUE: + *va_arg(ap, uint16 *) = td->td_maxsamplevalue; + return (1); + case TIFFTAG_PLANARCONFIG: + *va_arg(ap, uint16 *) = td->td_planarconfig; + return (1); + case TIFFTAG_RESOLUTIONUNIT: + *va_arg(ap, uint16 *) = td->td_resolutionunit; + return (1); + case TIFFTAG_PREDICTOR: + { + TIFFPredictorState* sp = (TIFFPredictorState*) tif->tif_data; + *va_arg(ap, uint16*) = (uint16) sp->predictor; + return 1; + } + case TIFFTAG_DOTRANGE: + *va_arg(ap, uint16 *) = 0; + *va_arg(ap, uint16 *) = (1<td_bitspersample)-1; + return (1); + case TIFFTAG_INKSET: + *va_arg(ap, uint16 *) = INKSET_CMYK; + return 1; + case TIFFTAG_NUMBEROFINKS: + *va_arg(ap, uint16 *) = 4; + return (1); + case TIFFTAG_EXTRASAMPLES: + *va_arg(ap, uint16 *) = td->td_extrasamples; + *va_arg(ap, uint16 **) = td->td_sampleinfo; + return (1); + case TIFFTAG_MATTEING: + *va_arg(ap, uint16 *) = + (td->td_extrasamples == 1 && + td->td_sampleinfo[0] == EXTRASAMPLE_ASSOCALPHA); + return (1); + case TIFFTAG_TILEDEPTH: + *va_arg(ap, uint32 *) = td->td_tiledepth; + return (1); + case TIFFTAG_DATATYPE: + *va_arg(ap, uint16 *) = td->td_sampleformat-1; + return (1); + case TIFFTAG_SAMPLEFORMAT: + *va_arg(ap, uint16 *) = td->td_sampleformat; + return(1); + case TIFFTAG_IMAGEDEPTH: + *va_arg(ap, uint32 *) = td->td_imagedepth; + return (1); + case TIFFTAG_YCBCRCOEFFICIENTS: + { + /* defaults are from CCIR Recommendation 601-1 */ + static float ycbcrcoeffs[] = { 0.299f, 0.587f, 0.114f }; + *va_arg(ap, float **) = ycbcrcoeffs; + return 1; + } + case TIFFTAG_YCBCRSUBSAMPLING: + *va_arg(ap, uint16 *) = td->td_ycbcrsubsampling[0]; + *va_arg(ap, uint16 *) = td->td_ycbcrsubsampling[1]; + return (1); + case TIFFTAG_YCBCRPOSITIONING: + *va_arg(ap, uint16 *) = td->td_ycbcrpositioning; + return (1); + case TIFFTAG_WHITEPOINT: + { + static float whitepoint[2]; + + /* TIFF 6.0 specification tells that it is no default + value for the WhitePoint, but AdobePhotoshop TIFF + Technical Note tells that it should be CIE D50. */ + whitepoint[0] = D50_X0 / (D50_X0 + D50_Y0 + D50_Z0); + whitepoint[1] = D50_Y0 / (D50_X0 + D50_Y0 + D50_Z0); + *va_arg(ap, float **) = whitepoint; + return 1; + } + case TIFFTAG_TRANSFERFUNCTION: + if (!td->td_transferfunction[0] && + !TIFFDefaultTransferFunction(td)) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, "No space for \"TransferFunction\" tag"); + return (0); + } + *va_arg(ap, uint16 **) = td->td_transferfunction[0]; + if (td->td_samplesperpixel - td->td_extrasamples > 1) { + *va_arg(ap, uint16 **) = td->td_transferfunction[1]; + *va_arg(ap, uint16 **) = td->td_transferfunction[2]; + } + return (1); + case TIFFTAG_REFERENCEBLACKWHITE: + if (!td->td_refblackwhite && !TIFFDefaultRefBlackWhite(td)) + return (0); + *va_arg(ap, float **) = td->td_refblackwhite; + return (1); + } + return 0; +} + +/* + * Like TIFFGetField, but return any default + * value if the tag is not present in the directory. + */ +int +TIFFGetFieldDefaulted(TIFF* tif, uint32 tag, ...) +{ + int ok; + va_list ap; + + va_start(ap, tag); + ok = TIFFVGetFieldDefaulted(tif, tag, ap); + va_end(ap); + return (ok); +} + +struct _Int64Parts { + int32 low, high; +}; + +typedef union { + struct _Int64Parts part; + int64 value; +} _Int64; + +float +_TIFFUInt64ToFloat(uint64 ui64) +{ + _Int64 i; + + i.value = ui64; + if (i.part.high >= 0) { + return (float)i.value; + } else { + long double df; + df = (long double)i.value; + df += 18446744073709551616.0; /* adding 2**64 */ + return (float)df; + } +} + +double +_TIFFUInt64ToDouble(uint64 ui64) +{ + _Int64 i; + + i.value = ui64; + if (i.part.high >= 0) { + return (double)i.value; + } else { + long double df; + df = (long double)i.value; + df += 18446744073709551616.0; /* adding 2**64 */ + return (double)df; + } +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_close.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_close.c new file mode 100644 index 000000000..13d2bab5c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_close.c @@ -0,0 +1,140 @@ +/* $Id: tif_close.c,v 1.19 2010-03-10 18:56:48 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + */ +#include "tiffiop.h" +#include + +/************************************************************************/ +/* TIFFCleanup() */ +/************************************************************************/ + +/** + * Auxiliary function to free the TIFF structure. Given structure will be + * completetly freed, so you should save opened file handle and pointer + * to the close procedure in external variables before calling + * _TIFFCleanup(), if you will need these ones to close the file. + * + * @param tif A TIFF pointer. + */ + +void +TIFFCleanup(TIFF* tif) +{ + /* + * Flush buffered data and directory (if dirty). + */ + if (tif->tif_mode != O_RDONLY) + TIFFFlush(tif); + (*tif->tif_cleanup)(tif); + TIFFFreeDirectory(tif); + + if (tif->tif_dirlist) + _TIFFfree(tif->tif_dirlist); + + /* + * Clean up client info links. + */ + while( tif->tif_clientinfo ) + { + TIFFClientInfoLink *link = tif->tif_clientinfo; + + tif->tif_clientinfo = link->next; + _TIFFfree( link->name ); + _TIFFfree( link ); + } + + if (tif->tif_rawdata && (tif->tif_flags&TIFF_MYBUFFER)) + _TIFFfree(tif->tif_rawdata); + if (isMapped(tif)) + TIFFUnmapFileContents(tif, tif->tif_base, (toff_t)tif->tif_size); + + /* + * Clean up custom fields. + */ + if (tif->tif_fields && tif->tif_nfields > 0) { + uint32 i; + + for (i = 0; i < tif->tif_nfields; i++) { + TIFFField *fld = tif->tif_fields[i]; + if (fld->field_bit == FIELD_CUSTOM && + strncmp("Tag ", fld->field_name, 4) == 0) { + _TIFFfree(fld->field_name); + _TIFFfree(fld); + } + } + + _TIFFfree(tif->tif_fields); + } + + if (tif->tif_nfieldscompat > 0) { + uint32 i; + + for (i = 0; i < tif->tif_nfieldscompat; i++) { + if (tif->tif_fieldscompat[i].allocated_size) + _TIFFfree(tif->tif_fieldscompat[i].fields); + } + _TIFFfree(tif->tif_fieldscompat); + } + + _TIFFfree(tif); +} + +/************************************************************************/ +/* TIFFClose() */ +/************************************************************************/ + +/** + * Close a previously opened TIFF file. + * + * TIFFClose closes a file that was previously opened with TIFFOpen(). + * Any buffered data are flushed to the file, including the contents of + * the current directory (if modified); and all resources are reclaimed. + * + * @param tif A TIFF pointer. + */ + +void +TIFFClose(TIFF* tif) +{ + TIFFCloseProc closeproc = tif->tif_closeproc; + thandle_t fd = tif->tif_clientdata; + + TIFFCleanup(tif); + (void) (*closeproc)(fd); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_codec.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_codec.c new file mode 100644 index 000000000..e20166737 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_codec.c @@ -0,0 +1,165 @@ +/* $Id: tif_codec.c,v 1.15 2010-12-14 12:53:00 dron Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Builtin Compression Scheme Configuration Support. + */ +#include "tiffiop.h" + +static int NotConfigured(TIFF*, int); + +#ifndef LZW_SUPPORT +#define TIFFInitLZW NotConfigured +#endif +#ifndef PACKBITS_SUPPORT +#define TIFFInitPackBits NotConfigured +#endif +#ifndef THUNDER_SUPPORT +#define TIFFInitThunderScan NotConfigured +#endif +#ifndef NEXT_SUPPORT +#define TIFFInitNeXT NotConfigured +#endif +#ifndef JPEG_SUPPORT +#define TIFFInitJPEG NotConfigured +#endif +#ifndef OJPEG_SUPPORT +#define TIFFInitOJPEG NotConfigured +#endif +#ifndef CCITT_SUPPORT +#define TIFFInitCCITTRLE NotConfigured +#define TIFFInitCCITTRLEW NotConfigured +#define TIFFInitCCITTFax3 NotConfigured +#define TIFFInitCCITTFax4 NotConfigured +#endif +#ifndef JBIG_SUPPORT +#define TIFFInitJBIG NotConfigured +#endif +#ifndef ZIP_SUPPORT +#define TIFFInitZIP NotConfigured +#endif +#ifndef PIXARLOG_SUPPORT +#define TIFFInitPixarLog NotConfigured +#endif +#ifndef LOGLUV_SUPPORT +#define TIFFInitSGILog NotConfigured +#endif +#ifndef LZMA_SUPPORT +#define TIFFInitLZMA NotConfigured +#endif + +/* + * Compression schemes statically built into the library. + */ +#ifdef VMS +const TIFFCodec _TIFFBuiltinCODECS[] = { +#else +TIFFCodec _TIFFBuiltinCODECS[] = { +#endif + { "None", COMPRESSION_NONE, TIFFInitDumpMode }, + { "LZW", COMPRESSION_LZW, TIFFInitLZW }, + { "PackBits", COMPRESSION_PACKBITS, TIFFInitPackBits }, + { "ThunderScan", COMPRESSION_THUNDERSCAN,TIFFInitThunderScan }, + { "NeXT", COMPRESSION_NEXT, TIFFInitNeXT }, + { "JPEG", COMPRESSION_JPEG, TIFFInitJPEG }, + { "Old-style JPEG", COMPRESSION_OJPEG, TIFFInitOJPEG }, + { "CCITT RLE", COMPRESSION_CCITTRLE, TIFFInitCCITTRLE }, + { "CCITT RLE/W", COMPRESSION_CCITTRLEW, TIFFInitCCITTRLEW }, + { "CCITT Group 3", COMPRESSION_CCITTFAX3, TIFFInitCCITTFax3 }, + { "CCITT Group 4", COMPRESSION_CCITTFAX4, TIFFInitCCITTFax4 }, + { "ISO JBIG", COMPRESSION_JBIG, TIFFInitJBIG }, + { "Deflate", COMPRESSION_DEFLATE, TIFFInitZIP }, + { "AdobeDeflate", COMPRESSION_ADOBE_DEFLATE , TIFFInitZIP }, + { "PixarLog", COMPRESSION_PIXARLOG, TIFFInitPixarLog }, + { "SGILog", COMPRESSION_SGILOG, TIFFInitSGILog }, + { "SGILog24", COMPRESSION_SGILOG24, TIFFInitSGILog }, + { "LZMA", COMPRESSION_LZMA, TIFFInitLZMA }, + { NULL, 0, NULL } +}; + +static int +_notConfigured(TIFF* tif) +{ + const TIFFCodec* c = TIFFFindCODEC(tif->tif_dir.td_compression); + char compression_code[20]; + + sprintf( compression_code, "%d", tif->tif_dir.td_compression ); + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "%s compression support is not configured", + c ? c->name : compression_code ); + return (0); +} + +static int +NotConfigured(TIFF* tif, int scheme) +{ + (void) scheme; + + tif->tif_fixuptags = _notConfigured; + tif->tif_decodestatus = FALSE; + tif->tif_setupdecode = _notConfigured; + tif->tif_encodestatus = FALSE; + tif->tif_setupencode = _notConfigured; + return (1); +} + +/************************************************************************/ +/* TIFFIsCODECConfigured() */ +/************************************************************************/ + +/** + * Check whether we have working codec for the specific coding scheme. + * + * @return returns 1 if the codec is configured and working. Otherwise + * 0 will be returned. + */ + +int +TIFFIsCODECConfigured(uint16 scheme) +{ + const TIFFCodec* codec = TIFFFindCODEC(scheme); + + if(codec == NULL) { + return 0; + } + if(codec->init == NULL) { + return 0; + } + if(codec->init != NotConfigured){ + return 1; + } + return 0; +} + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_color.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_color.c new file mode 100644 index 000000000..be4850ce6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_color.c @@ -0,0 +1,287 @@ +/* $Id: tif_color.c,v 1.19 2010-12-14 02:22:42 faxguy Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * CIE L*a*b* to CIE XYZ and CIE XYZ to RGB conversion routines are taken + * from the VIPS library (http://www.vips.ecs.soton.ac.uk) with + * the permission of John Cupitt, the VIPS author. + */ + +/* + * TIFF Library. + * + * Color space conversion routines. + */ + +#include "tiffiop.h" +#include + +/* + * Convert color value from the CIE L*a*b* 1976 space to CIE XYZ. + */ +void +TIFFCIELabToXYZ(TIFFCIELabToRGB *cielab, uint32 l, int32 a, int32 b, + float *X, float *Y, float *Z) +{ + float L = (float)l * 100.0F / 255.0F; + float cby, tmp; + + if( L < 8.856F ) { + *Y = (L * cielab->Y0) / 903.292F; + cby = 7.787F * (*Y / cielab->Y0) + 16.0F / 116.0F; + } else { + cby = (L + 16.0F) / 116.0F; + *Y = cielab->Y0 * cby * cby * cby; + } + + tmp = (float)a / 500.0F + cby; + if( tmp < 0.2069F ) + *X = cielab->X0 * (tmp - 0.13793F) / 7.787F; + else + *X = cielab->X0 * tmp * tmp * tmp; + + tmp = cby - (float)b / 200.0F; + if( tmp < 0.2069F ) + *Z = cielab->Z0 * (tmp - 0.13793F) / 7.787F; + else + *Z = cielab->Z0 * tmp * tmp * tmp; +} + +#define RINT(R) ((uint32)((R)>0?((R)+0.5):((R)-0.5))) +/* + * Convert color value from the XYZ space to RGB. + */ +void +TIFFXYZToRGB(TIFFCIELabToRGB *cielab, float X, float Y, float Z, + uint32 *r, uint32 *g, uint32 *b) +{ + int i; + float Yr, Yg, Yb; + float *matrix = &cielab->display.d_mat[0][0]; + + /* Multiply through the matrix to get luminosity values. */ + Yr = matrix[0] * X + matrix[1] * Y + matrix[2] * Z; + Yg = matrix[3] * X + matrix[4] * Y + matrix[5] * Z; + Yb = matrix[6] * X + matrix[7] * Y + matrix[8] * Z; + + /* Clip input */ + Yr = TIFFmax(Yr, cielab->display.d_Y0R); + Yg = TIFFmax(Yg, cielab->display.d_Y0G); + Yb = TIFFmax(Yb, cielab->display.d_Y0B); + + /* Avoid overflow in case of wrong input values */ + Yr = TIFFmin(Yr, cielab->display.d_YCR); + Yg = TIFFmin(Yg, cielab->display.d_YCG); + Yb = TIFFmin(Yb, cielab->display.d_YCB); + + /* Turn luminosity to colour value. */ + i = (int)((Yr - cielab->display.d_Y0R) / cielab->rstep); + i = TIFFmin(cielab->range, i); + *r = RINT(cielab->Yr2r[i]); + + i = (int)((Yg - cielab->display.d_Y0G) / cielab->gstep); + i = TIFFmin(cielab->range, i); + *g = RINT(cielab->Yg2g[i]); + + i = (int)((Yb - cielab->display.d_Y0B) / cielab->bstep); + i = TIFFmin(cielab->range, i); + *b = RINT(cielab->Yb2b[i]); + + /* Clip output. */ + *r = TIFFmin(*r, cielab->display.d_Vrwr); + *g = TIFFmin(*g, cielab->display.d_Vrwg); + *b = TIFFmin(*b, cielab->display.d_Vrwb); +} +#undef RINT + +/* + * Allocate conversion state structures and make look_up tables for + * the Yr,Yb,Yg <=> r,g,b conversions. + */ +int +TIFFCIELabToRGBInit(TIFFCIELabToRGB* cielab, + const TIFFDisplay *display, float *refWhite) +{ + int i; + double gamma; + + cielab->range = CIELABTORGB_TABLE_RANGE; + + _TIFFmemcpy(&cielab->display, display, sizeof(TIFFDisplay)); + + /* Red */ + gamma = 1.0 / cielab->display.d_gammaR ; + cielab->rstep = + (cielab->display.d_YCR - cielab->display.d_Y0R) / cielab->range; + for(i = 0; i <= cielab->range; i++) { + cielab->Yr2r[i] = cielab->display.d_Vrwr + * ((float)pow((double)i / cielab->range, gamma)); + } + + /* Green */ + gamma = 1.0 / cielab->display.d_gammaG ; + cielab->gstep = + (cielab->display.d_YCR - cielab->display.d_Y0R) / cielab->range; + for(i = 0; i <= cielab->range; i++) { + cielab->Yg2g[i] = cielab->display.d_Vrwg + * ((float)pow((double)i / cielab->range, gamma)); + } + + /* Blue */ + gamma = 1.0 / cielab->display.d_gammaB ; + cielab->bstep = + (cielab->display.d_YCR - cielab->display.d_Y0R) / cielab->range; + for(i = 0; i <= cielab->range; i++) { + cielab->Yb2b[i] = cielab->display.d_Vrwb + * ((float)pow((double)i / cielab->range, gamma)); + } + + /* Init reference white point */ + cielab->X0 = refWhite[0]; + cielab->Y0 = refWhite[1]; + cielab->Z0 = refWhite[2]; + + return 0; +} + +/* + * Convert color value from the YCbCr space to CIE XYZ. + * The colorspace conversion algorithm comes from the IJG v5a code; + * see below for more information on how it works. + */ +#define SHIFT 16 +#define FIX(x) ((int32)((x) * (1L<(max)?(max):(f)) +#define HICLAMP(f,max) ((f)>(max)?(max):(f)) + +void +TIFFYCbCrtoRGB(TIFFYCbCrToRGB *ycbcr, uint32 Y, int32 Cb, int32 Cr, + uint32 *r, uint32 *g, uint32 *b) +{ + int32 i; + + /* XXX: Only 8-bit YCbCr input supported for now */ + Y = HICLAMP(Y, 255), Cb = CLAMP(Cb, 0, 255), Cr = CLAMP(Cr, 0, 255); + + i = ycbcr->Y_tab[Y] + ycbcr->Cr_r_tab[Cr]; + *r = CLAMP(i, 0, 255); + i = ycbcr->Y_tab[Y] + + (int)((ycbcr->Cb_g_tab[Cb] + ycbcr->Cr_g_tab[Cr]) >> SHIFT); + *g = CLAMP(i, 0, 255); + i = ycbcr->Y_tab[Y] + ycbcr->Cb_b_tab[Cb]; + *b = CLAMP(i, 0, 255); +} + +/* + * Initialize the YCbCr->RGB conversion tables. The conversion + * is done according to the 6.0 spec: + * + * R = Y + Cr*(2 - 2*LumaRed) + * B = Y + Cb*(2 - 2*LumaBlue) + * G = Y + * - LumaBlue*Cb*(2-2*LumaBlue)/LumaGreen + * - LumaRed*Cr*(2-2*LumaRed)/LumaGreen + * + * To avoid floating point arithmetic the fractional constants that + * come out of the equations are represented as fixed point values + * in the range 0...2^16. We also eliminate multiplications by + * pre-calculating possible values indexed by Cb and Cr (this code + * assumes conversion is being done for 8-bit samples). + */ +int +TIFFYCbCrToRGBInit(TIFFYCbCrToRGB* ycbcr, float *luma, float *refBlackWhite) +{ + TIFFRGBValue* clamptab; + int i; + +#define LumaRed luma[0] +#define LumaGreen luma[1] +#define LumaBlue luma[2] + + clamptab = (TIFFRGBValue*)( + (uint8*) ycbcr+TIFFroundup_32(sizeof (TIFFYCbCrToRGB), sizeof (long))); + _TIFFmemset(clamptab, 0, 256); /* v < 0 => 0 */ + ycbcr->clamptab = (clamptab += 256); + for (i = 0; i < 256; i++) + clamptab[i] = (TIFFRGBValue) i; + _TIFFmemset(clamptab+256, 255, 2*256); /* v > 255 => 255 */ + ycbcr->Cr_r_tab = (int*) (clamptab + 3*256); + ycbcr->Cb_b_tab = ycbcr->Cr_r_tab + 256; + ycbcr->Cr_g_tab = (int32*) (ycbcr->Cb_b_tab + 256); + ycbcr->Cb_g_tab = ycbcr->Cr_g_tab + 256; + ycbcr->Y_tab = ycbcr->Cb_g_tab + 256; + + { float f1 = 2-2*LumaRed; int32 D1 = FIX(f1); + float f2 = LumaRed*f1/LumaGreen; int32 D2 = -FIX(f2); + float f3 = 2-2*LumaBlue; int32 D3 = FIX(f3); + float f4 = LumaBlue*f3/LumaGreen; int32 D4 = -FIX(f4); + int x; + +#undef LumaBlue +#undef LumaGreen +#undef LumaRed + + /* + * i is the actual input pixel value in the range 0..255 + * Cb and Cr values are in the range -128..127 (actually + * they are in a range defined by the ReferenceBlackWhite + * tag) so there is some range shifting to do here when + * constructing tables indexed by the raw pixel data. + */ + for (i = 0, x = -128; i < 256; i++, x++) { + int32 Cr = (int32)Code2V(x, refBlackWhite[4] - 128.0F, + refBlackWhite[5] - 128.0F, 127); + int32 Cb = (int32)Code2V(x, refBlackWhite[2] - 128.0F, + refBlackWhite[3] - 128.0F, 127); + + ycbcr->Cr_r_tab[i] = (int32)((D1*Cr + ONE_HALF)>>SHIFT); + ycbcr->Cb_b_tab[i] = (int32)((D3*Cb + ONE_HALF)>>SHIFT); + ycbcr->Cr_g_tab[i] = D2*Cr; + ycbcr->Cb_g_tab[i] = D4*Cb + ONE_HALF; + ycbcr->Y_tab[i] = + (int32)Code2V(x + 128, refBlackWhite[0], refBlackWhite[1], 255); + } + } + + return 0; +} +#undef HICLAMP +#undef CLAMP +#undef Code2V +#undef SHIFT +#undef ONE_HALF +#undef FIX + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_compress.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_compress.c new file mode 100644 index 000000000..20e72fd07 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_compress.c @@ -0,0 +1,304 @@ +/* $Id: tif_compress.c,v 1.22 2010-03-10 18:56:48 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Compression Scheme Configuration Support. + */ +#include "tiffiop.h" + +static int +TIFFNoEncode(TIFF* tif, const char* method) +{ + const TIFFCodec* c = TIFFFindCODEC(tif->tif_dir.td_compression); + + if (c) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "%s %s encoding is not implemented", + c->name, method); + } else { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "Compression scheme %u %s encoding is not implemented", + tif->tif_dir.td_compression, method); + } + return (-1); +} + +int +_TIFFNoRowEncode(TIFF* tif, uint8* pp, tmsize_t cc, uint16 s) +{ + (void) pp; (void) cc; (void) s; + return (TIFFNoEncode(tif, "scanline")); +} + +int +_TIFFNoStripEncode(TIFF* tif, uint8* pp, tmsize_t cc, uint16 s) +{ + (void) pp; (void) cc; (void) s; + return (TIFFNoEncode(tif, "strip")); +} + +int +_TIFFNoTileEncode(TIFF* tif, uint8* pp, tmsize_t cc, uint16 s) +{ + (void) pp; (void) cc; (void) s; + return (TIFFNoEncode(tif, "tile")); +} + +static int +TIFFNoDecode(TIFF* tif, const char* method) +{ + const TIFFCodec* c = TIFFFindCODEC(tif->tif_dir.td_compression); + + if (c) + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "%s %s decoding is not implemented", + c->name, method); + else + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "Compression scheme %u %s decoding is not implemented", + tif->tif_dir.td_compression, method); + return (-1); +} + +int +_TIFFNoFixupTags(TIFF* tif) +{ + (void) tif; + return (1); +} + +int +_TIFFNoRowDecode(TIFF* tif, uint8* pp, tmsize_t cc, uint16 s) +{ + (void) pp; (void) cc; (void) s; + return (TIFFNoDecode(tif, "scanline")); +} + +int +_TIFFNoStripDecode(TIFF* tif, uint8* pp, tmsize_t cc, uint16 s) +{ + (void) pp; (void) cc; (void) s; + return (TIFFNoDecode(tif, "strip")); +} + +int +_TIFFNoTileDecode(TIFF* tif, uint8* pp, tmsize_t cc, uint16 s) +{ + (void) pp; (void) cc; (void) s; + return (TIFFNoDecode(tif, "tile")); +} + +int +_TIFFNoSeek(TIFF* tif, uint32 off) +{ + (void) off; + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "Compression algorithm does not support random access"); + return (0); +} + +int +_TIFFNoPreCode(TIFF* tif, uint16 s) +{ + (void) tif; (void) s; + return (1); +} + +static int _TIFFtrue(TIFF* tif) { (void) tif; return (1); } +static void _TIFFvoid(TIFF* tif) { (void) tif; } + +void +_TIFFSetDefaultCompressionState(TIFF* tif) +{ + tif->tif_fixuptags = _TIFFNoFixupTags; + tif->tif_decodestatus = TRUE; + tif->tif_setupdecode = _TIFFtrue; + tif->tif_predecode = _TIFFNoPreCode; + tif->tif_decoderow = _TIFFNoRowDecode; + tif->tif_decodestrip = _TIFFNoStripDecode; + tif->tif_decodetile = _TIFFNoTileDecode; + tif->tif_encodestatus = TRUE; + tif->tif_setupencode = _TIFFtrue; + tif->tif_preencode = _TIFFNoPreCode; + tif->tif_postencode = _TIFFtrue; + tif->tif_encoderow = _TIFFNoRowEncode; + tif->tif_encodestrip = _TIFFNoStripEncode; + tif->tif_encodetile = _TIFFNoTileEncode; + tif->tif_close = _TIFFvoid; + tif->tif_seek = _TIFFNoSeek; + tif->tif_cleanup = _TIFFvoid; + tif->tif_defstripsize = _TIFFDefaultStripSize; + tif->tif_deftilesize = _TIFFDefaultTileSize; + tif->tif_flags &= ~(TIFF_NOBITREV|TIFF_NOREADRAW); +} + +int +TIFFSetCompressionScheme(TIFF* tif, int scheme) +{ + const TIFFCodec *c = TIFFFindCODEC((uint16) scheme); + + _TIFFSetDefaultCompressionState(tif); + /* + * Don't treat an unknown compression scheme as an error. + * This permits applications to open files with data that + * the library does not have builtin support for, but which + * may still be meaningful. + */ + return (c ? (*c->init)(tif, scheme) : 1); +} + +/* + * Other compression schemes may be registered. Registered + * schemes can also override the builtin versions provided + * by this library. + */ +typedef struct _codec { + struct _codec* next; + TIFFCodec* info; +} codec_t; +static codec_t* registeredCODECS = NULL; + +const TIFFCodec* +TIFFFindCODEC(uint16 scheme) +{ + const TIFFCodec* c; + codec_t* cd; + + for (cd = registeredCODECS; cd; cd = cd->next) + if (cd->info->scheme == scheme) + return ((const TIFFCodec*) cd->info); + for (c = _TIFFBuiltinCODECS; c->name; c++) + if (c->scheme == scheme) + return (c); + return ((const TIFFCodec*) 0); +} + +TIFFCodec* +TIFFRegisterCODEC(uint16 scheme, const char* name, TIFFInitMethod init) +{ + codec_t* cd = (codec_t*) + _TIFFmalloc((tmsize_t)(sizeof (codec_t) + sizeof (TIFFCodec) + strlen(name)+1)); + + if (cd != NULL) { + cd->info = (TIFFCodec*) ((uint8*) cd + sizeof (codec_t)); + cd->info->name = (char*) + ((uint8*) cd->info + sizeof (TIFFCodec)); + strcpy(cd->info->name, name); + cd->info->scheme = scheme; + cd->info->init = init; + cd->next = registeredCODECS; + registeredCODECS = cd; + } else { + TIFFErrorExt(0, "TIFFRegisterCODEC", + "No space to register compression scheme %s", name); + return NULL; + } + return (cd->info); +} + +void +TIFFUnRegisterCODEC(TIFFCodec* c) +{ + codec_t* cd; + codec_t** pcd; + + for (pcd = ®isteredCODECS; (cd = *pcd); pcd = &cd->next) + if (cd->info == c) { + *pcd = cd->next; + _TIFFfree(cd); + return; + } + TIFFErrorExt(0, "TIFFUnRegisterCODEC", + "Cannot remove compression scheme %s; not registered", c->name); +} + +/************************************************************************/ +/* TIFFGetConfisuredCODECs() */ +/************************************************************************/ + +/** + * Get list of configured codecs, both built-in and registered by user. + * Caller is responsible to free this structure. + * + * @return returns array of TIFFCodec records (the last record should be NULL) + * or NULL if function failed. + */ + +TIFFCodec* +TIFFGetConfiguredCODECs() +{ + int i = 1; + codec_t *cd; + const TIFFCodec* c; + TIFFCodec* codecs = NULL; + TIFFCodec* new_codecs; + + for (cd = registeredCODECS; cd; cd = cd->next) { + new_codecs = (TIFFCodec *) + _TIFFrealloc(codecs, i * sizeof(TIFFCodec)); + if (!new_codecs) { + _TIFFfree (codecs); + return NULL; + } + codecs = new_codecs; + _TIFFmemcpy(codecs + i - 1, cd, sizeof(TIFFCodec)); + i++; + } + for (c = _TIFFBuiltinCODECS; c->name; c++) { + if (TIFFIsCODECConfigured(c->scheme)) { + new_codecs = (TIFFCodec *) + _TIFFrealloc(codecs, i * sizeof(TIFFCodec)); + if (!new_codecs) { + _TIFFfree (codecs); + return NULL; + } + codecs = new_codecs; + _TIFFmemcpy(codecs + i - 1, (const void*)c, sizeof(TIFFCodec)); + i++; + } + } + + new_codecs = (TIFFCodec *) _TIFFrealloc(codecs, i * sizeof(TIFFCodec)); + if (!new_codecs) { + _TIFFfree (codecs); + return NULL; + } + codecs = new_codecs; + _TIFFmemset(codecs + i - 1, 0, sizeof(TIFFCodec)); + + return codecs; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.h-vms b/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.h-vms new file mode 100644 index 000000000..d653bd827 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.h-vms @@ -0,0 +1,46 @@ +/* Define to 1 if you have the header file. */ +#define HAVE_ASSERT_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_FCNTL_H 1 + +/* Define as 0 or 1 according to the floating point format suported by the + machine */ +#define HAVE_IEEEFP 1 + +#define HAVE_UNISTD_H 1 + +#define HAVE_STRING_H 1 +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_TYPES_H 1 + +/* Define to 1 if you have the header file. */ +//#define HAVE_IO_H 1 + +/* Define to 1 if you have the header file. */ +//#define HAVE_SEARCH_H 1 + +/* The size of a `int', as computed by sizeof. */ +#define SIZEOF_INT 4 + +/* The size of a `long', as computed by sizeof. */ +#define SIZEOF_LONG 4 + +/* Set the native cpu bit order */ +#define HOST_FILLORDER FILLORDER_LSB2MSB + +/* Define to 1 if your processor stores words with the most significant byte + first (like Motorola and SPARC, unlike Intel and VAX). */ +/* #undef WORDS_BIGENDIAN */ + +/* Define to `__inline__' or `__inline' if that's what the C compiler + calls it, or to nothing if 'inline' is not supported under any name. */ +/* +#ifndef __cplusplus +# ifndef inline +# define inline __inline +# endif +#endif +*/ + +// #define lfind _lfind diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.h.in b/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.h.in new file mode 100644 index 000000000..b2cea3546 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.h.in @@ -0,0 +1,395 @@ +/* libtiff/tif_config.h.in. Generated from configure.ac by autoheader. */ + +/* Define if building universal (internal helper macro) */ +#undef AC_APPLE_UNIVERSAL_BUILD + +/* Support CCITT Group 3 & 4 algorithms */ +#undef CCITT_SUPPORT + +/* Pick up YCbCr subsampling info from the JPEG data stream to support files + lacking the tag (default enabled). */ +#undef CHECK_JPEG_YCBCR_SUBSAMPLING + +/* enable partial strip reading for large strips (experimental) */ +#undef CHUNKY_STRIP_READ_SUPPORT + +/* Support C++ stream API (requires C++ compiler) */ +#undef CXX_SUPPORT + +/* Treat extra sample as alpha (default enabled). The RGBA interface will + treat a fourth sample with no EXTRASAMPLE_ value as being ASSOCALPHA. Many + packages produce RGBA files but don't mark the alpha properly. */ +#undef DEFAULT_EXTRASAMPLE_AS_ALPHA + +/* enable deferred strip/tile offset/size loading (experimental) */ +#undef DEFER_STRILE_LOAD + +/* Define to 1 if you have the header file. */ +#undef HAVE_ASSERT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_FCNTL_H + +/* Define to 1 if you have the `floor' function. */ +#undef HAVE_FLOOR + +/* Define to 1 if you have the `getopt' function. */ +#undef HAVE_GETOPT + +/* Define to 1 if you have the header file. */ +#undef HAVE_GLUT_GLUT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_GL_GLUT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_GL_GLU_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_GL_GL_H + +/* Define as 0 or 1 according to the floating point format suported by the + machine */ +#undef HAVE_IEEEFP + +/* Define to 1 if the system has the type `int16'. */ +#undef HAVE_INT16 + +/* Define to 1 if the system has the type `int32'. */ +#undef HAVE_INT32 + +/* Define to 1 if the system has the type `int8'. */ +#undef HAVE_INT8 + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_IO_H + +/* Define to 1 if you have the `isascii' function. */ +#undef HAVE_ISASCII + +/* Define to 1 if you have the `jbg_newlen' function. */ +#undef HAVE_JBG_NEWLEN + +/* Define to 1 if you have the `lfind' function. */ +#undef HAVE_LFIND + +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + +/* Define to 1 if you have the header file. */ +#undef HAVE_LIMITS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_MALLOC_H + +/* Define to 1 if you have the `memmove' function. */ +#undef HAVE_MEMMOVE + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the `memset' function. */ +#undef HAVE_MEMSET + +/* Define to 1 if you have the `mmap' function. */ +#undef HAVE_MMAP + +/* Define to 1 if you have the header file. */ +#undef HAVE_OPENGL_GLU_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_OPENGL_GL_H + +/* Define to 1 if you have the `pow' function. */ +#undef HAVE_POW + +/* Define if you have POSIX threads libraries and header files. */ +#undef HAVE_PTHREAD + +/* Define to 1 if you have the header file. */ +#undef HAVE_SEARCH_H + +/* Define to 1 if you have the `setmode' function. */ +#undef HAVE_SETMODE + +/* Define to 1 if you have the `sqrt' function. */ +#undef HAVE_SQRT + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the `strcasecmp' function. */ +#undef HAVE_STRCASECMP + +/* Define to 1 if you have the `strchr' function. */ +#undef HAVE_STRCHR + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the `strrchr' function. */ +#undef HAVE_STRRCHR + +/* Define to 1 if you have the `strstr' function. */ +#undef HAVE_STRSTR + +/* Define to 1 if you have the `strtol' function. */ +#undef HAVE_STRTOL + +/* Define to 1 if you have the `strtoul' function. */ +#undef HAVE_STRTOUL + +/* Define to 1 if you have the `strtoull' function. */ +#undef HAVE_STRTOULL + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TIME_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Use nonstandard varargs form for the GLU tesselator callback */ +#undef HAVE_VARARGS_GLU_TESSCB + +/* Define to 1 if you have the header file. */ +#undef HAVE_WINDOWS_H + +/* Native cpu byte order: 1 if big-endian (Motorola) or 0 if little-endian + (Intel) */ +#undef HOST_BIGENDIAN + +/* Set the native cpu bit order (FILLORDER_LSB2MSB or FILLORDER_MSB2LSB) */ +#undef HOST_FILLORDER + +/* Support ISO JBIG compression (requires JBIG-KIT library) */ +#undef JBIG_SUPPORT + +/* 8/12 bit libjpeg dual mode enabled */ +#undef JPEG_DUAL_MODE_8_12 + +/* Support JPEG compression (requires IJG JPEG library) */ +#undef JPEG_SUPPORT + +/* 12bit libjpeg primary include file with path */ +#undef LIBJPEG_12_PATH + +/* Support LogLuv high dynamic range encoding */ +#undef LOGLUV_SUPPORT + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + +/* Support LZMA2 compression */ +#undef LZMA_SUPPORT + +/* Support LZW algorithm */ +#undef LZW_SUPPORT + +/* Support Microsoft Document Imaging format */ +#undef MDI_SUPPORT + +/* Support NeXT 2-bit RLE algorithm */ +#undef NEXT_SUPPORT + +/* Define to 1 if your C compiler doesn't accept -c and -o together. */ +#undef NO_MINUS_C_MINUS_O + +/* Support Old JPEG compresson (read-only) */ +#undef OJPEG_SUPPORT + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Support Macintosh PackBits algorithm */ +#undef PACKBITS_SUPPORT + +/* Support Pixar log-format algorithm (requires Zlib) */ +#undef PIXARLOG_SUPPORT + +/* Define to necessary symbol if this constant uses a non-standard name on + your system. */ +#undef PTHREAD_CREATE_JOINABLE + +/* The size of `signed int', as computed by sizeof. */ +#undef SIZEOF_SIGNED_INT + +/* The size of `signed long', as computed by sizeof. */ +#undef SIZEOF_SIGNED_LONG + +/* The size of `signed long long', as computed by sizeof. */ +#undef SIZEOF_SIGNED_LONG_LONG + +/* The size of `signed short', as computed by sizeof. */ +#undef SIZEOF_SIGNED_SHORT + +/* The size of `unsigned char *', as computed by sizeof. */ +#undef SIZEOF_UNSIGNED_CHAR_P + +/* The size of `unsigned int', as computed by sizeof. */ +#undef SIZEOF_UNSIGNED_INT + +/* The size of `unsigned long', as computed by sizeof. */ +#undef SIZEOF_UNSIGNED_LONG + +/* The size of `unsigned long long', as computed by sizeof. */ +#undef SIZEOF_UNSIGNED_LONG_LONG + +/* The size of `unsigned short', as computed by sizeof. */ +#undef SIZEOF_UNSIGNED_SHORT + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Support strip chopping (whether or not to convert single-strip uncompressed + images to mutiple strips of specified size to reduce memory usage) */ +#undef STRIPCHOP_DEFAULT + +/* Default size of the strip in bytes (when strip chopping enabled) */ +#undef STRIP_SIZE_DEFAULT + +/* Enable SubIFD tag (330) support */ +#undef SUBIFD_SUPPORT + +/* Support ThunderScan 4-bit RLE algorithm */ +#undef THUNDER_SUPPORT + +/* Signed 16-bit type */ +#undef TIFF_INT16_T + +/* Signed 32-bit type formatter */ +#undef TIFF_INT32_FORMAT + +/* Signed 32-bit type */ +#undef TIFF_INT32_T + +/* Signed 64-bit type formatter */ +#undef TIFF_INT64_FORMAT + +/* Signed 64-bit type */ +#undef TIFF_INT64_T + +/* Signed 8-bit type */ +#undef TIFF_INT8_T + +/* Pointer difference type formatter */ +#undef TIFF_PTRDIFF_FORMAT + +/* Pointer difference type */ +#undef TIFF_PTRDIFF_T + +/* Signed size type formatter */ +#undef TIFF_SSIZE_FORMAT + +/* Signed size type */ +#undef TIFF_SSIZE_T + +/* Unsigned 16-bit type */ +#undef TIFF_UINT16_T + +/* Unsigned 32-bit type formatter */ +#undef TIFF_UINT32_FORMAT + +/* Unsigned 32-bit type */ +#undef TIFF_UINT32_T + +/* Unsigned 64-bit type formatter */ +#undef TIFF_UINT64_FORMAT + +/* Unsigned 64-bit type */ +#undef TIFF_UINT64_T + +/* Unsigned 8-bit type */ +#undef TIFF_UINT8_T + +/* Define to 1 if you can safely include both and . */ +#undef TIME_WITH_SYS_TIME + +/* Define to 1 if your declares `struct tm'. */ +#undef TM_IN_SYS_TIME + +/* define to use win32 IO system */ +#undef USE_WIN32_FILEIO + +/* Version number of package */ +#undef VERSION + +/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most + significant byte first (like Motorola and SPARC, unlike Intel). */ +#if defined AC_APPLE_UNIVERSAL_BUILD +# if defined __BIG_ENDIAN__ +# define WORDS_BIGENDIAN 1 +# endif +#else +# ifndef WORDS_BIGENDIAN +# undef WORDS_BIGENDIAN +# endif +#endif + +/* Define to 1 if the X Window System is missing or not being used. */ +#undef X_DISPLAY_MISSING + +/* Support Deflate compression */ +#undef ZIP_SUPPORT + +/* Enable large inode numbers on Mac OS X 10.5. */ +#ifndef _DARWIN_USE_64_BIT_INODE +# define _DARWIN_USE_64_BIT_INODE 1 +#endif + +/* Number of bits in a file offset, on hosts where this is settable. */ +#undef _FILE_OFFSET_BITS + +/* Define for large files, on AIX-style hosts. */ +#undef _LARGE_FILES + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to `__inline__' or `__inline' if that's what the C compiler + calls it, or to nothing if 'inline' is not supported under any name. */ +#ifndef __cplusplus +#undef inline +#endif + +/* Define to `long int' if does not define. */ +#undef off_t + +/* Define to `unsigned int' if does not define. */ +#undef size_t diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.vc.h b/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.vc.h new file mode 100644 index 000000000..c297cf3c4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.vc.h @@ -0,0 +1,71 @@ +/* Define to 1 if you have the header file. */ +#define HAVE_ASSERT_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_FCNTL_H 1 + +/* Define as 0 or 1 according to the floating point format suported by the + machine */ +#define HAVE_IEEEFP 1 + +/* Define to 1 if you have the `jbg_newlen' function. */ +#define HAVE_JBG_NEWLEN 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_STRING_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_TYPES_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_IO_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SEARCH_H 1 + +/* Define to 1 if you have the `setmode' function. */ +#define HAVE_SETMODE 1 + +/* The size of a `int', as computed by sizeof. */ +#define SIZEOF_INT 4 + +/* The size of a `long', as computed by sizeof. */ +#define SIZEOF_LONG 4 + +/* Signed 64-bit type formatter */ +#define TIFF_INT64_FORMAT "%I64d" + +/* Signed 64-bit type */ +#define TIFF_INT64_T signed __int64 + +/* Unsigned 64-bit type formatter */ +#define TIFF_UINT64_FORMAT "%I64u" + +/* Unsigned 64-bit type */ +#define TIFF_UINT64_T unsigned __int64 + +/* Set the native cpu bit order */ +#define HOST_FILLORDER FILLORDER_LSB2MSB + +#define snprintf _snprintf + +/* Define to 1 if your processor stores words with the most significant byte + first (like Motorola and SPARC, unlike Intel and VAX). */ +/* #undef WORDS_BIGENDIAN */ + +/* Define to `__inline__' or `__inline' if that's what the C compiler + calls it, or to nothing if 'inline' is not supported under any name. */ +#ifndef __cplusplus +# ifndef inline +# define inline __inline +# endif +#endif + +#define lfind _lfind +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.wince.h b/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.wince.h new file mode 100644 index 000000000..94e92bbf9 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_config.wince.h @@ -0,0 +1,71 @@ +/* $Id: tif_config.wince.h,v 1.3 2010-03-10 18:56:48 bfriesen Exp $ */ + +/* + * TIFF library configuration header for Windows CE platform. + */ +#ifndef _WIN32_WCE +# error This version of tif_config.h header is dedicated for Windows CE platform! +#endif + +/* Define to 1 if you have the header file. */ +#define HAVE_ASSERT_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_FCNTL_H 1 + +/* Define as 0 or 1 according to the floating point format suported by the + machine */ +#define HAVE_IEEEFP 1 + +/* Define to 1 if you have the `jbg_newlen' function. */ +#define HAVE_JBG_NEWLEN 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_STRING_H 1 + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#define HAVE_IO_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SEARCH_H 1 + +/* Define to 1 if you have the `setmode' function. */ +#define HAVE_SETMODE 1 + +/* Define to 1 if you have the `bsearch' function. */ +#define HAVE_BSEARCH 1 +#define bsearch wceex_bsearch + +/* Define to 1 if you have the `lfind' function. */ +#define HAVE_LFIND 1 +#define lfind wceex_lfind + +/* The size of a `int', as computed by sizeof. */ +#define SIZEOF_INT 4 + +/* Set the native cpu bit order */ +#define HOST_FILLORDER FILLORDER_LSB2MSB + +/* Define to 1 if your processor stores words with the most significant byte + first (like Motorola and SPARC, unlike Intel and VAX). */ +/* #undef WORDS_BIGENDIAN */ + +/* Define to `__inline__' or `__inline' if that's what the C compiler + calls it, or to nothing if 'inline' is not supported under any name. */ +#ifndef __cplusplus +# ifndef inline +# define inline __inline +# endif +#endif + + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_dir.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dir.c new file mode 100644 index 000000000..8bf3ea719 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dir.c @@ -0,0 +1,1659 @@ +/* $Id: tif_dir.c,v 1.113 2012-06-14 20:32:53 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * Directory Tag Get & Set Routines. + * (and also some miscellaneous stuff) + */ +#include "tiffiop.h" + +/* + * These are used in the backwards compatibility code... + */ +#define DATATYPE_VOID 0 /* !untyped data */ +#define DATATYPE_INT 1 /* !signed integer data */ +#define DATATYPE_UINT 2 /* !unsigned integer data */ +#define DATATYPE_IEEEFP 3 /* !IEEE floating point data */ + +static void +setByteArray(void** vpp, void* vp, size_t nmemb, size_t elem_size) +{ + if (*vpp) + _TIFFfree(*vpp), *vpp = 0; + if (vp) { + tmsize_t bytes = (tmsize_t)(nmemb * elem_size); + if (elem_size && bytes / elem_size == nmemb) + *vpp = (void*) _TIFFmalloc(bytes); + if (*vpp) + _TIFFmemcpy(*vpp, vp, bytes); + } +} +void _TIFFsetByteArray(void** vpp, void* vp, uint32 n) + { setByteArray(vpp, vp, n, 1); } +void _TIFFsetString(char** cpp, char* cp) + { setByteArray((void**) cpp, (void*) cp, strlen(cp)+1, 1); } +void _TIFFsetNString(char** cpp, char* cp, uint32 n) + { setByteArray((void**) cpp, (void*) cp, n, 1); } +void _TIFFsetShortArray(uint16** wpp, uint16* wp, uint32 n) + { setByteArray((void**) wpp, (void*) wp, n, sizeof (uint16)); } +void _TIFFsetLongArray(uint32** lpp, uint32* lp, uint32 n) + { setByteArray((void**) lpp, (void*) lp, n, sizeof (uint32)); } +void _TIFFsetLong8Array(uint64** lpp, uint64* lp, uint32 n) + { setByteArray((void**) lpp, (void*) lp, n, sizeof (uint64)); } +void _TIFFsetFloatArray(float** fpp, float* fp, uint32 n) + { setByteArray((void**) fpp, (void*) fp, n, sizeof (float)); } +void _TIFFsetDoubleArray(double** dpp, double* dp, uint32 n) + { setByteArray((void**) dpp, (void*) dp, n, sizeof (double)); } + +static void +setDoubleArrayOneValue(double** vpp, double value, size_t nmemb) +{ + if (*vpp) + _TIFFfree(*vpp); + *vpp = _TIFFmalloc(nmemb*sizeof(double)); + if (*vpp) + { + while (nmemb--) + ((double*)*vpp)[nmemb] = value; + } +} + +/* + * Install extra samples information. + */ +static int +setExtraSamples(TIFFDirectory* td, va_list ap, uint32* v) +{ +/* XXX: Unassociated alpha data == 999 is a known Corel Draw bug, see below */ +#define EXTRASAMPLE_COREL_UNASSALPHA 999 + + uint16* va; + uint32 i; + + *v = (uint16) va_arg(ap, uint16_vap); + if ((uint16) *v > td->td_samplesperpixel) + return 0; + va = va_arg(ap, uint16*); + if (*v > 0 && va == NULL) /* typically missing param */ + return 0; + for (i = 0; i < *v; i++) { + if (va[i] > EXTRASAMPLE_UNASSALPHA) { + /* + * XXX: Corel Draw is known to produce incorrect + * ExtraSamples tags which must be patched here if we + * want to be able to open some of the damaged TIFF + * files: + */ + if (va[i] == EXTRASAMPLE_COREL_UNASSALPHA) + va[i] = EXTRASAMPLE_UNASSALPHA; + else + return 0; + } + } + td->td_extrasamples = (uint16) *v; + _TIFFsetShortArray(&td->td_sampleinfo, va, td->td_extrasamples); + return 1; + +#undef EXTRASAMPLE_COREL_UNASSALPHA +} + +/* + * Confirm we have "samplesperpixel" ink names separated by \0. Returns + * zero if the ink names are not as expected. + */ +static uint32 +checkInkNamesString(TIFF* tif, uint32 slen, const char* s) +{ + TIFFDirectory* td = &tif->tif_dir; + uint16 i = td->td_samplesperpixel; + + if (slen > 0) { + const char* ep = s+slen; + const char* cp = s; + for (; i > 0; i--) { + for (; cp < ep && *cp != '\0'; cp++) {} + if (cp >= ep) + goto bad; + cp++; /* skip \0 */ + } + return ((uint32)(cp-s)); + } +bad: + TIFFErrorExt(tif->tif_clientdata, "TIFFSetField", + "%s: Invalid InkNames value; expecting %d names, found %d", + tif->tif_name, + td->td_samplesperpixel, + td->td_samplesperpixel-i); + return (0); +} + +static int +_TIFFVSetField(TIFF* tif, uint32 tag, va_list ap) +{ + static const char module[] = "_TIFFVSetField"; + + TIFFDirectory* td = &tif->tif_dir; + int status = 1; + uint32 v32, i, v; + char* s; + const TIFFField *fip = TIFFFindField(tif, tag, TIFF_ANY); + uint32 standard_tag = tag; + + /* + * We want to force the custom code to be used for custom + * fields even if the tag happens to match a well known + * one - important for reinterpreted handling of standard + * tag values in custom directories (ie. EXIF) + */ + if (fip->field_bit == FIELD_CUSTOM) { + standard_tag = 0; + } + + switch (standard_tag) { + case TIFFTAG_SUBFILETYPE: + td->td_subfiletype = (uint32) va_arg(ap, uint32); + break; + case TIFFTAG_IMAGEWIDTH: + td->td_imagewidth = (uint32) va_arg(ap, uint32); + break; + case TIFFTAG_IMAGELENGTH: + td->td_imagelength = (uint32) va_arg(ap, uint32); + break; + case TIFFTAG_BITSPERSAMPLE: + td->td_bitspersample = (uint16) va_arg(ap, uint16_vap); + /* + * If the data require post-decoding processing to byte-swap + * samples, set it up here. Note that since tags are required + * to be ordered, compression code can override this behaviour + * in the setup method if it wants to roll the post decoding + * work in with its normal work. + */ + if (tif->tif_flags & TIFF_SWAB) { + if (td->td_bitspersample == 8) + tif->tif_postdecode = _TIFFNoPostDecode; + else if (td->td_bitspersample == 16) + tif->tif_postdecode = _TIFFSwab16BitData; + else if (td->td_bitspersample == 24) + tif->tif_postdecode = _TIFFSwab24BitData; + else if (td->td_bitspersample == 32) + tif->tif_postdecode = _TIFFSwab32BitData; + else if (td->td_bitspersample == 64) + tif->tif_postdecode = _TIFFSwab64BitData; + else if (td->td_bitspersample == 128) /* two 64's */ + tif->tif_postdecode = _TIFFSwab64BitData; + } + break; + case TIFFTAG_COMPRESSION: + v = (uint16) va_arg(ap, uint16_vap); + /* + * If we're changing the compression scheme, the notify the + * previous module so that it can cleanup any state it's + * setup. + */ + if (TIFFFieldSet(tif, FIELD_COMPRESSION)) { + if ((uint32)td->td_compression == v) + break; + (*tif->tif_cleanup)(tif); + tif->tif_flags &= ~TIFF_CODERSETUP; + } + /* + * Setup new compression routine state. + */ + if( (status = TIFFSetCompressionScheme(tif, v)) != 0 ) + td->td_compression = (uint16) v; + else + status = 0; + break; + case TIFFTAG_PHOTOMETRIC: + td->td_photometric = (uint16) va_arg(ap, uint16_vap); + break; + case TIFFTAG_THRESHHOLDING: + td->td_threshholding = (uint16) va_arg(ap, uint16_vap); + break; + case TIFFTAG_FILLORDER: + v = (uint16) va_arg(ap, uint16_vap); + if (v != FILLORDER_LSB2MSB && v != FILLORDER_MSB2LSB) + goto badvalue; + td->td_fillorder = (uint16) v; + break; + case TIFFTAG_ORIENTATION: + v = (uint16) va_arg(ap, uint16_vap); + if (v < ORIENTATION_TOPLEFT || ORIENTATION_LEFTBOT < v) + goto badvalue; + else + td->td_orientation = (uint16) v; + break; + case TIFFTAG_SAMPLESPERPIXEL: + v = (uint16) va_arg(ap, uint16_vap); + if (v == 0) + goto badvalue; + td->td_samplesperpixel = (uint16) v; + break; + case TIFFTAG_ROWSPERSTRIP: + v32 = (uint32) va_arg(ap, uint32); + if (v32 == 0) + goto badvalue32; + td->td_rowsperstrip = v32; + if (!TIFFFieldSet(tif, FIELD_TILEDIMENSIONS)) { + td->td_tilelength = v32; + td->td_tilewidth = td->td_imagewidth; + } + break; + case TIFFTAG_MINSAMPLEVALUE: + td->td_minsamplevalue = (uint16) va_arg(ap, uint16_vap); + break; + case TIFFTAG_MAXSAMPLEVALUE: + td->td_maxsamplevalue = (uint16) va_arg(ap, uint16_vap); + break; + case TIFFTAG_SMINSAMPLEVALUE: + if (tif->tif_flags & TIFF_PERSAMPLE) + _TIFFsetDoubleArray(&td->td_sminsamplevalue, va_arg(ap, double*), td->td_samplesperpixel); + else + setDoubleArrayOneValue(&td->td_sminsamplevalue, va_arg(ap, double), td->td_samplesperpixel); + break; + case TIFFTAG_SMAXSAMPLEVALUE: + if (tif->tif_flags & TIFF_PERSAMPLE) + _TIFFsetDoubleArray(&td->td_smaxsamplevalue, va_arg(ap, double*), td->td_samplesperpixel); + else + setDoubleArrayOneValue(&td->td_smaxsamplevalue, va_arg(ap, double), td->td_samplesperpixel); + break; + case TIFFTAG_XRESOLUTION: + td->td_xresolution = (float) va_arg(ap, double); + break; + case TIFFTAG_YRESOLUTION: + td->td_yresolution = (float) va_arg(ap, double); + break; + case TIFFTAG_PLANARCONFIG: + v = (uint16) va_arg(ap, uint16_vap); + if (v != PLANARCONFIG_CONTIG && v != PLANARCONFIG_SEPARATE) + goto badvalue; + td->td_planarconfig = (uint16) v; + break; + case TIFFTAG_XPOSITION: + td->td_xposition = (float) va_arg(ap, double); + break; + case TIFFTAG_YPOSITION: + td->td_yposition = (float) va_arg(ap, double); + break; + case TIFFTAG_RESOLUTIONUNIT: + v = (uint16) va_arg(ap, uint16_vap); + if (v < RESUNIT_NONE || RESUNIT_CENTIMETER < v) + goto badvalue; + td->td_resolutionunit = (uint16) v; + break; + case TIFFTAG_PAGENUMBER: + td->td_pagenumber[0] = (uint16) va_arg(ap, uint16_vap); + td->td_pagenumber[1] = (uint16) va_arg(ap, uint16_vap); + break; + case TIFFTAG_HALFTONEHINTS: + td->td_halftonehints[0] = (uint16) va_arg(ap, uint16_vap); + td->td_halftonehints[1] = (uint16) va_arg(ap, uint16_vap); + break; + case TIFFTAG_COLORMAP: + v32 = (uint32)(1L<td_bitspersample); + _TIFFsetShortArray(&td->td_colormap[0], va_arg(ap, uint16*), v32); + _TIFFsetShortArray(&td->td_colormap[1], va_arg(ap, uint16*), v32); + _TIFFsetShortArray(&td->td_colormap[2], va_arg(ap, uint16*), v32); + break; + case TIFFTAG_EXTRASAMPLES: + if (!setExtraSamples(td, ap, &v)) + goto badvalue; + break; + case TIFFTAG_MATTEING: + td->td_extrasamples = (((uint16) va_arg(ap, uint16_vap)) != 0); + if (td->td_extrasamples) { + uint16 sv = EXTRASAMPLE_ASSOCALPHA; + _TIFFsetShortArray(&td->td_sampleinfo, &sv, 1); + } + break; + case TIFFTAG_TILEWIDTH: + v32 = (uint32) va_arg(ap, uint32); + if (v32 % 16) { + if (tif->tif_mode != O_RDONLY) + goto badvalue32; + TIFFWarningExt(tif->tif_clientdata, tif->tif_name, + "Nonstandard tile width %d, convert file", v32); + } + td->td_tilewidth = v32; + tif->tif_flags |= TIFF_ISTILED; + break; + case TIFFTAG_TILELENGTH: + v32 = (uint32) va_arg(ap, uint32); + if (v32 % 16) { + if (tif->tif_mode != O_RDONLY) + goto badvalue32; + TIFFWarningExt(tif->tif_clientdata, tif->tif_name, + "Nonstandard tile length %d, convert file", v32); + } + td->td_tilelength = v32; + tif->tif_flags |= TIFF_ISTILED; + break; + case TIFFTAG_TILEDEPTH: + v32 = (uint32) va_arg(ap, uint32); + if (v32 == 0) + goto badvalue32; + td->td_tiledepth = v32; + break; + case TIFFTAG_DATATYPE: + v = (uint16) va_arg(ap, uint16_vap); + switch (v) { + case DATATYPE_VOID: v = SAMPLEFORMAT_VOID; break; + case DATATYPE_INT: v = SAMPLEFORMAT_INT; break; + case DATATYPE_UINT: v = SAMPLEFORMAT_UINT; break; + case DATATYPE_IEEEFP: v = SAMPLEFORMAT_IEEEFP;break; + default: goto badvalue; + } + td->td_sampleformat = (uint16) v; + break; + case TIFFTAG_SAMPLEFORMAT: + v = (uint16) va_arg(ap, uint16_vap); + if (v < SAMPLEFORMAT_UINT || SAMPLEFORMAT_COMPLEXIEEEFP < v) + goto badvalue; + td->td_sampleformat = (uint16) v; + + /* Try to fix up the SWAB function for complex data. */ + if( td->td_sampleformat == SAMPLEFORMAT_COMPLEXINT + && td->td_bitspersample == 32 + && tif->tif_postdecode == _TIFFSwab32BitData ) + tif->tif_postdecode = _TIFFSwab16BitData; + else if( (td->td_sampleformat == SAMPLEFORMAT_COMPLEXINT + || td->td_sampleformat == SAMPLEFORMAT_COMPLEXIEEEFP) + && td->td_bitspersample == 64 + && tif->tif_postdecode == _TIFFSwab64BitData ) + tif->tif_postdecode = _TIFFSwab32BitData; + break; + case TIFFTAG_IMAGEDEPTH: + td->td_imagedepth = (uint32) va_arg(ap, uint32); + break; + case TIFFTAG_SUBIFD: + if ((tif->tif_flags & TIFF_INSUBIFD) == 0) { + td->td_nsubifd = (uint16) va_arg(ap, uint16_vap); + _TIFFsetLong8Array(&td->td_subifd, (uint64*) va_arg(ap, uint64*), + (long) td->td_nsubifd); + } else { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Sorry, cannot nest SubIFDs", + tif->tif_name); + status = 0; + } + break; + case TIFFTAG_YCBCRPOSITIONING: + td->td_ycbcrpositioning = (uint16) va_arg(ap, uint16_vap); + break; + case TIFFTAG_YCBCRSUBSAMPLING: + td->td_ycbcrsubsampling[0] = (uint16) va_arg(ap, uint16_vap); + td->td_ycbcrsubsampling[1] = (uint16) va_arg(ap, uint16_vap); + break; + case TIFFTAG_TRANSFERFUNCTION: + v = (td->td_samplesperpixel - td->td_extrasamples) > 1 ? 3 : 1; + for (i = 0; i < v; i++) + _TIFFsetShortArray(&td->td_transferfunction[i], + va_arg(ap, uint16*), 1L<td_bitspersample); + break; + case TIFFTAG_REFERENCEBLACKWHITE: + /* XXX should check for null range */ + _TIFFsetFloatArray(&td->td_refblackwhite, va_arg(ap, float*), 6); + break; + case TIFFTAG_INKNAMES: + v = (uint16) va_arg(ap, uint16_vap); + s = va_arg(ap, char*); + v = checkInkNamesString(tif, v, s); + status = v > 0; + if( v > 0 ) { + _TIFFsetNString(&td->td_inknames, s, v); + td->td_inknameslen = v; + } + break; + case TIFFTAG_PERSAMPLE: + v = (uint16) va_arg(ap, uint16_vap); + if( v == PERSAMPLE_MULTI ) + tif->tif_flags |= TIFF_PERSAMPLE; + else + tif->tif_flags &= ~TIFF_PERSAMPLE; + break; + default: { + TIFFTagValue *tv; + int tv_size, iCustom; + + /* + * This can happen if multiple images are open with different + * codecs which have private tags. The global tag information + * table may then have tags that are valid for one file but not + * the other. If the client tries to set a tag that is not valid + * for the image's codec then we'll arrive here. This + * happens, for example, when tiffcp is used to convert between + * compression schemes and codec-specific tags are blindly copied. + */ + if(fip == NULL || fip->field_bit != FIELD_CUSTOM) { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Invalid %stag \"%s\" (not supported by codec)", + tif->tif_name, isPseudoTag(tag) ? "pseudo-" : "", + fip ? fip->field_name : "Unknown"); + status = 0; + break; + } + + /* + * Find the existing entry for this custom value. + */ + tv = NULL; + for (iCustom = 0; iCustom < td->td_customValueCount; iCustom++) { + if (td->td_customValues[iCustom].info->field_tag == tag) { + tv = td->td_customValues + iCustom; + if (tv->value != NULL) { + _TIFFfree(tv->value); + tv->value = NULL; + } + break; + } + } + + /* + * Grow the custom list if the entry was not found. + */ + if(tv == NULL) { + TIFFTagValue *new_customValues; + + td->td_customValueCount++; + new_customValues = (TIFFTagValue *) + _TIFFrealloc(td->td_customValues, + sizeof(TIFFTagValue) * td->td_customValueCount); + if (!new_customValues) { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Failed to allocate space for list of custom values", + tif->tif_name); + status = 0; + goto end; + } + + td->td_customValues = new_customValues; + + tv = td->td_customValues + (td->td_customValueCount - 1); + tv->info = fip; + tv->value = NULL; + tv->count = 0; + } + + /* + * Set custom value ... save a copy of the custom tag value. + */ + tv_size = _TIFFDataSize(fip->field_type); + if (tv_size == 0) { + status = 0; + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Bad field type %d for \"%s\"", + tif->tif_name, fip->field_type, + fip->field_name); + goto end; + } + + if (fip->field_type == TIFF_ASCII) + { + uint32 ma; + char* mb; + if (fip->field_passcount) + { + assert(fip->field_writecount==TIFF_VARIABLE2); + ma=(uint32)va_arg(ap,uint32); + mb=(char*)va_arg(ap,char*); + } + else + { + mb=(char*)va_arg(ap,char*); + ma=(uint32)(strlen(mb)+1); + } + tv->count=ma; + setByteArray(&tv->value,mb,ma,1); + } + else + { + if (fip->field_passcount) { + if (fip->field_writecount == TIFF_VARIABLE2) + tv->count = (uint32) va_arg(ap, uint32); + else + tv->count = (int) va_arg(ap, int); + } else if (fip->field_writecount == TIFF_VARIABLE + || fip->field_writecount == TIFF_VARIABLE2) + tv->count = 1; + else if (fip->field_writecount == TIFF_SPP) + tv->count = td->td_samplesperpixel; + else + tv->count = fip->field_writecount; + + if (tv->count == 0) { + status = 0; + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Null count for \"%s\" (type " + "%d, writecount %d, passcount %d)", + tif->tif_name, + fip->field_name, + fip->field_type, + fip->field_writecount, + fip->field_passcount); + goto end; + } + + tv->value = _TIFFCheckMalloc(tif, tv->count, tv_size, + "custom tag binary object"); + if (!tv->value) { + status = 0; + goto end; + } + + if (fip->field_tag == TIFFTAG_DOTRANGE + && strcmp(fip->field_name,"DotRange") == 0) { + /* TODO: This is an evil exception and should not have been + handled this way ... likely best if we move it into + the directory structure with an explicit field in + libtiff 4.1 and assign it a FIELD_ value */ + uint16 v[2]; + v[0] = (uint16)va_arg(ap, int); + v[1] = (uint16)va_arg(ap, int); + _TIFFmemcpy(tv->value, &v, 4); + } + + else if (fip->field_passcount + || fip->field_writecount == TIFF_VARIABLE + || fip->field_writecount == TIFF_VARIABLE2 + || fip->field_writecount == TIFF_SPP + || tv->count > 1) { + _TIFFmemcpy(tv->value, va_arg(ap, void *), + tv->count * tv_size); + } else { + char *val = (char *)tv->value; + assert( tv->count == 1 ); + + switch (fip->field_type) { + case TIFF_BYTE: + case TIFF_UNDEFINED: + { + uint8 v = (uint8)va_arg(ap, int); + _TIFFmemcpy(val, &v, tv_size); + } + break; + case TIFF_SBYTE: + { + int8 v = (int8)va_arg(ap, int); + _TIFFmemcpy(val, &v, tv_size); + } + break; + case TIFF_SHORT: + { + uint16 v = (uint16)va_arg(ap, int); + _TIFFmemcpy(val, &v, tv_size); + } + break; + case TIFF_SSHORT: + { + int16 v = (int16)va_arg(ap, int); + _TIFFmemcpy(val, &v, tv_size); + } + break; + case TIFF_LONG: + case TIFF_IFD: + { + uint32 v = va_arg(ap, uint32); + _TIFFmemcpy(val, &v, tv_size); + } + break; + case TIFF_SLONG: + { + int32 v = va_arg(ap, int32); + _TIFFmemcpy(val, &v, tv_size); + } + break; + case TIFF_LONG8: + case TIFF_IFD8: + { + uint64 v = va_arg(ap, uint64); + _TIFFmemcpy(val, &v, tv_size); + } + break; + case TIFF_SLONG8: + { + int64 v = va_arg(ap, int64); + _TIFFmemcpy(val, &v, tv_size); + } + break; + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_FLOAT: + { + float v = (float)va_arg(ap, double); + _TIFFmemcpy(val, &v, tv_size); + } + break; + case TIFF_DOUBLE: + { + double v = va_arg(ap, double); + _TIFFmemcpy(val, &v, tv_size); + } + break; + default: + _TIFFmemset(val, 0, tv_size); + status = 0; + break; + } + } + } + } + } + if (status) { + const TIFFField* fip=TIFFFieldWithTag(tif,tag); + if (fip) + TIFFSetFieldBit(tif, fip->field_bit); + tif->tif_flags |= TIFF_DIRTYDIRECT; + } + +end: + va_end(ap); + return (status); +badvalue: + { + const TIFFField* fip=TIFFFieldWithTag(tif,tag); + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Bad value %u for \"%s\" tag", + tif->tif_name, v, + fip ? fip->field_name : "Unknown"); + va_end(ap); + } + return (0); +badvalue32: + { + const TIFFField* fip=TIFFFieldWithTag(tif,tag); + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Bad value %u for \"%s\" tag", + tif->tif_name, v32, + fip ? fip->field_name : "Unknown"); + va_end(ap); + } + return (0); +} + +/* + * Return 1/0 according to whether or not + * it is permissible to set the tag's value. + * Note that we allow ImageLength to be changed + * so that we can append and extend to images. + * Any other tag may not be altered once writing + * has commenced, unless its value has no effect + * on the format of the data that is written. + */ +static int +OkToChangeTag(TIFF* tif, uint32 tag) +{ + const TIFFField* fip = TIFFFindField(tif, tag, TIFF_ANY); + if (!fip) { /* unknown tag */ + TIFFErrorExt(tif->tif_clientdata, "TIFFSetField", "%s: Unknown %stag %u", + tif->tif_name, isPseudoTag(tag) ? "pseudo-" : "", tag); + return (0); + } + if (tag != TIFFTAG_IMAGELENGTH && (tif->tif_flags & TIFF_BEENWRITING) && + !fip->field_oktochange) { + /* + * Consult info table to see if tag can be changed + * after we've started writing. We only allow changes + * to those tags that don't/shouldn't affect the + * compression and/or format of the data. + */ + TIFFErrorExt(tif->tif_clientdata, "TIFFSetField", + "%s: Cannot modify tag \"%s\" while writing", + tif->tif_name, fip->field_name); + return (0); + } + return (1); +} + +/* + * Record the value of a field in the + * internal directory structure. The + * field will be written to the file + * when/if the directory structure is + * updated. + */ +int +TIFFSetField(TIFF* tif, uint32 tag, ...) +{ + va_list ap; + int status; + + va_start(ap, tag); + status = TIFFVSetField(tif, tag, ap); + va_end(ap); + return (status); +} + +/* + * Clear the contents of the field in the internal structure. + */ +int +TIFFUnsetField(TIFF* tif, uint32 tag) +{ + const TIFFField *fip = TIFFFieldWithTag(tif, tag); + TIFFDirectory* td = &tif->tif_dir; + + if( !fip ) + return 0; + + if( fip->field_bit != FIELD_CUSTOM ) + TIFFClrFieldBit(tif, fip->field_bit); + else + { + TIFFTagValue *tv = NULL; + int i; + + for (i = 0; i < td->td_customValueCount; i++) { + + tv = td->td_customValues + i; + if( tv->info->field_tag == tag ) + break; + } + + if( i < td->td_customValueCount ) + { + _TIFFfree(tv->value); + for( ; i < td->td_customValueCount-1; i++) { + td->td_customValues[i] = td->td_customValues[i+1]; + } + td->td_customValueCount--; + } + } + + tif->tif_flags |= TIFF_DIRTYDIRECT; + + return (1); +} + +/* + * Like TIFFSetField, but taking a varargs + * parameter list. This routine is useful + * for building higher-level interfaces on + * top of the library. + */ +int +TIFFVSetField(TIFF* tif, uint32 tag, va_list ap) +{ + return OkToChangeTag(tif, tag) ? + (*tif->tif_tagmethods.vsetfield)(tif, tag, ap) : 0; +} + +static int +_TIFFVGetField(TIFF* tif, uint32 tag, va_list ap) +{ + TIFFDirectory* td = &tif->tif_dir; + int ret_val = 1; + uint32 standard_tag = tag; + const TIFFField* fip = TIFFFindField(tif, tag, TIFF_ANY); + + /* + * We want to force the custom code to be used for custom + * fields even if the tag happens to match a well known + * one - important for reinterpreted handling of standard + * tag values in custom directories (ie. EXIF) + */ + if (fip->field_bit == FIELD_CUSTOM) { + standard_tag = 0; + } + + switch (standard_tag) { + case TIFFTAG_SUBFILETYPE: + *va_arg(ap, uint32*) = td->td_subfiletype; + break; + case TIFFTAG_IMAGEWIDTH: + *va_arg(ap, uint32*) = td->td_imagewidth; + break; + case TIFFTAG_IMAGELENGTH: + *va_arg(ap, uint32*) = td->td_imagelength; + break; + case TIFFTAG_BITSPERSAMPLE: + *va_arg(ap, uint16*) = td->td_bitspersample; + break; + case TIFFTAG_COMPRESSION: + *va_arg(ap, uint16*) = td->td_compression; + break; + case TIFFTAG_PHOTOMETRIC: + *va_arg(ap, uint16*) = td->td_photometric; + break; + case TIFFTAG_THRESHHOLDING: + *va_arg(ap, uint16*) = td->td_threshholding; + break; + case TIFFTAG_FILLORDER: + *va_arg(ap, uint16*) = td->td_fillorder; + break; + case TIFFTAG_ORIENTATION: + *va_arg(ap, uint16*) = td->td_orientation; + break; + case TIFFTAG_SAMPLESPERPIXEL: + *va_arg(ap, uint16*) = td->td_samplesperpixel; + break; + case TIFFTAG_ROWSPERSTRIP: + *va_arg(ap, uint32*) = td->td_rowsperstrip; + break; + case TIFFTAG_MINSAMPLEVALUE: + *va_arg(ap, uint16*) = td->td_minsamplevalue; + break; + case TIFFTAG_MAXSAMPLEVALUE: + *va_arg(ap, uint16*) = td->td_maxsamplevalue; + break; + case TIFFTAG_SMINSAMPLEVALUE: + if (tif->tif_flags & TIFF_PERSAMPLE) + *va_arg(ap, double**) = td->td_sminsamplevalue; + else + { + /* libtiff historially treats this as a single value. */ + uint16 i; + double v = td->td_sminsamplevalue[0]; + for (i=1; i < td->td_samplesperpixel; ++i) + if( td->td_sminsamplevalue[i] < v ) + v = td->td_sminsamplevalue[i]; + *va_arg(ap, double*) = v; + } + break; + case TIFFTAG_SMAXSAMPLEVALUE: + if (tif->tif_flags & TIFF_PERSAMPLE) + *va_arg(ap, double**) = td->td_smaxsamplevalue; + else + { + /* libtiff historially treats this as a single value. */ + uint16 i; + double v = td->td_smaxsamplevalue[0]; + for (i=1; i < td->td_samplesperpixel; ++i) + if( td->td_smaxsamplevalue[i] > v ) + v = td->td_smaxsamplevalue[i]; + *va_arg(ap, double*) = v; + } + break; + case TIFFTAG_XRESOLUTION: + *va_arg(ap, float*) = td->td_xresolution; + break; + case TIFFTAG_YRESOLUTION: + *va_arg(ap, float*) = td->td_yresolution; + break; + case TIFFTAG_PLANARCONFIG: + *va_arg(ap, uint16*) = td->td_planarconfig; + break; + case TIFFTAG_XPOSITION: + *va_arg(ap, float*) = td->td_xposition; + break; + case TIFFTAG_YPOSITION: + *va_arg(ap, float*) = td->td_yposition; + break; + case TIFFTAG_RESOLUTIONUNIT: + *va_arg(ap, uint16*) = td->td_resolutionunit; + break; + case TIFFTAG_PAGENUMBER: + *va_arg(ap, uint16*) = td->td_pagenumber[0]; + *va_arg(ap, uint16*) = td->td_pagenumber[1]; + break; + case TIFFTAG_HALFTONEHINTS: + *va_arg(ap, uint16*) = td->td_halftonehints[0]; + *va_arg(ap, uint16*) = td->td_halftonehints[1]; + break; + case TIFFTAG_COLORMAP: + *va_arg(ap, uint16**) = td->td_colormap[0]; + *va_arg(ap, uint16**) = td->td_colormap[1]; + *va_arg(ap, uint16**) = td->td_colormap[2]; + break; + case TIFFTAG_STRIPOFFSETS: + case TIFFTAG_TILEOFFSETS: + _TIFFFillStriles( tif ); + *va_arg(ap, uint64**) = td->td_stripoffset; + break; + case TIFFTAG_STRIPBYTECOUNTS: + case TIFFTAG_TILEBYTECOUNTS: + _TIFFFillStriles( tif ); + *va_arg(ap, uint64**) = td->td_stripbytecount; + break; + case TIFFTAG_MATTEING: + *va_arg(ap, uint16*) = + (td->td_extrasamples == 1 && + td->td_sampleinfo[0] == EXTRASAMPLE_ASSOCALPHA); + break; + case TIFFTAG_EXTRASAMPLES: + *va_arg(ap, uint16*) = td->td_extrasamples; + *va_arg(ap, uint16**) = td->td_sampleinfo; + break; + case TIFFTAG_TILEWIDTH: + *va_arg(ap, uint32*) = td->td_tilewidth; + break; + case TIFFTAG_TILELENGTH: + *va_arg(ap, uint32*) = td->td_tilelength; + break; + case TIFFTAG_TILEDEPTH: + *va_arg(ap, uint32*) = td->td_tiledepth; + break; + case TIFFTAG_DATATYPE: + switch (td->td_sampleformat) { + case SAMPLEFORMAT_UINT: + *va_arg(ap, uint16*) = DATATYPE_UINT; + break; + case SAMPLEFORMAT_INT: + *va_arg(ap, uint16*) = DATATYPE_INT; + break; + case SAMPLEFORMAT_IEEEFP: + *va_arg(ap, uint16*) = DATATYPE_IEEEFP; + break; + case SAMPLEFORMAT_VOID: + *va_arg(ap, uint16*) = DATATYPE_VOID; + break; + } + break; + case TIFFTAG_SAMPLEFORMAT: + *va_arg(ap, uint16*) = td->td_sampleformat; + break; + case TIFFTAG_IMAGEDEPTH: + *va_arg(ap, uint32*) = td->td_imagedepth; + break; + case TIFFTAG_SUBIFD: + *va_arg(ap, uint16*) = td->td_nsubifd; + *va_arg(ap, uint64**) = td->td_subifd; + break; + case TIFFTAG_YCBCRPOSITIONING: + *va_arg(ap, uint16*) = td->td_ycbcrpositioning; + break; + case TIFFTAG_YCBCRSUBSAMPLING: + *va_arg(ap, uint16*) = td->td_ycbcrsubsampling[0]; + *va_arg(ap, uint16*) = td->td_ycbcrsubsampling[1]; + break; + case TIFFTAG_TRANSFERFUNCTION: + *va_arg(ap, uint16**) = td->td_transferfunction[0]; + if (td->td_samplesperpixel - td->td_extrasamples > 1) { + *va_arg(ap, uint16**) = td->td_transferfunction[1]; + *va_arg(ap, uint16**) = td->td_transferfunction[2]; + } + break; + case TIFFTAG_REFERENCEBLACKWHITE: + *va_arg(ap, float**) = td->td_refblackwhite; + break; + case TIFFTAG_INKNAMES: + *va_arg(ap, char**) = td->td_inknames; + break; + default: + { + int i; + + /* + * This can happen if multiple images are open + * with different codecs which have private + * tags. The global tag information table may + * then have tags that are valid for one file + * but not the other. If the client tries to + * get a tag that is not valid for the image's + * codec then we'll arrive here. + */ + if( fip == NULL || fip->field_bit != FIELD_CUSTOM ) + { + TIFFErrorExt(tif->tif_clientdata, "_TIFFVGetField", + "%s: Invalid %stag \"%s\" " + "(not supported by codec)", + tif->tif_name, + isPseudoTag(tag) ? "pseudo-" : "", + fip ? fip->field_name : "Unknown"); + ret_val = 0; + break; + } + + /* + * Do we have a custom value? + */ + ret_val = 0; + for (i = 0; i < td->td_customValueCount; i++) { + TIFFTagValue *tv = td->td_customValues + i; + + if (tv->info->field_tag != tag) + continue; + + if (fip->field_passcount) { + if (fip->field_readcount == TIFF_VARIABLE2) + *va_arg(ap, uint32*) = (uint32)tv->count; + else /* Assume TIFF_VARIABLE */ + *va_arg(ap, uint16*) = (uint16)tv->count; + *va_arg(ap, void **) = tv->value; + ret_val = 1; + } else if (fip->field_tag == TIFFTAG_DOTRANGE + && strcmp(fip->field_name,"DotRange") == 0) { + /* TODO: This is an evil exception and should not have been + handled this way ... likely best if we move it into + the directory structure with an explicit field in + libtiff 4.1 and assign it a FIELD_ value */ + *va_arg(ap, uint16*) = ((uint16 *)tv->value)[0]; + *va_arg(ap, uint16*) = ((uint16 *)tv->value)[1]; + ret_val = 1; + } else { + if (fip->field_type == TIFF_ASCII + || fip->field_readcount == TIFF_VARIABLE + || fip->field_readcount == TIFF_VARIABLE2 + || fip->field_readcount == TIFF_SPP + || tv->count > 1) { + *va_arg(ap, void **) = tv->value; + ret_val = 1; + } else { + char *val = (char *)tv->value; + assert( tv->count == 1 ); + switch (fip->field_type) { + case TIFF_BYTE: + case TIFF_UNDEFINED: + *va_arg(ap, uint8*) = + *(uint8 *)val; + ret_val = 1; + break; + case TIFF_SBYTE: + *va_arg(ap, int8*) = + *(int8 *)val; + ret_val = 1; + break; + case TIFF_SHORT: + *va_arg(ap, uint16*) = + *(uint16 *)val; + ret_val = 1; + break; + case TIFF_SSHORT: + *va_arg(ap, int16*) = + *(int16 *)val; + ret_val = 1; + break; + case TIFF_LONG: + case TIFF_IFD: + *va_arg(ap, uint32*) = + *(uint32 *)val; + ret_val = 1; + break; + case TIFF_SLONG: + *va_arg(ap, int32*) = + *(int32 *)val; + ret_val = 1; + break; + case TIFF_LONG8: + case TIFF_IFD8: + *va_arg(ap, uint64*) = + *(uint64 *)val; + ret_val = 1; + break; + case TIFF_SLONG8: + *va_arg(ap, int64*) = + *(int64 *)val; + ret_val = 1; + break; + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_FLOAT: + *va_arg(ap, float*) = + *(float *)val; + ret_val = 1; + break; + case TIFF_DOUBLE: + *va_arg(ap, double*) = + *(double *)val; + ret_val = 1; + break; + default: + ret_val = 0; + break; + } + } + } + break; + } + } + } + return(ret_val); +} + +/* + * Return the value of a field in the + * internal directory structure. + */ +int +TIFFGetField(TIFF* tif, uint32 tag, ...) +{ + int status; + va_list ap; + + va_start(ap, tag); + status = TIFFVGetField(tif, tag, ap); + va_end(ap); + return (status); +} + +/* + * Like TIFFGetField, but taking a varargs + * parameter list. This routine is useful + * for building higher-level interfaces on + * top of the library. + */ +int +TIFFVGetField(TIFF* tif, uint32 tag, va_list ap) +{ + const TIFFField* fip = TIFFFindField(tif, tag, TIFF_ANY); + return (fip && (isPseudoTag(tag) || TIFFFieldSet(tif, fip->field_bit)) ? + (*tif->tif_tagmethods.vgetfield)(tif, tag, ap) : 0); +} + +#define CleanupField(member) { \ + if (td->member) { \ + _TIFFfree(td->member); \ + td->member = 0; \ + } \ +} + +/* + * Release storage associated with a directory. + */ +void +TIFFFreeDirectory(TIFF* tif) +{ + TIFFDirectory *td = &tif->tif_dir; + int i; + + _TIFFmemset(td->td_fieldsset, 0, FIELD_SETLONGS); + CleanupField(td_sminsamplevalue); + CleanupField(td_smaxsamplevalue); + CleanupField(td_colormap[0]); + CleanupField(td_colormap[1]); + CleanupField(td_colormap[2]); + CleanupField(td_sampleinfo); + CleanupField(td_subifd); + CleanupField(td_inknames); + CleanupField(td_refblackwhite); + CleanupField(td_transferfunction[0]); + CleanupField(td_transferfunction[1]); + CleanupField(td_transferfunction[2]); + CleanupField(td_stripoffset); + CleanupField(td_stripbytecount); + TIFFClrFieldBit(tif, FIELD_YCBCRSUBSAMPLING); + TIFFClrFieldBit(tif, FIELD_YCBCRPOSITIONING); + + /* Cleanup custom tag values */ + for( i = 0; i < td->td_customValueCount; i++ ) { + if (td->td_customValues[i].value) + _TIFFfree(td->td_customValues[i].value); + } + + td->td_customValueCount = 0; + CleanupField(td_customValues); + +#if defined(DEFER_STRILE_LOAD) + _TIFFmemset( &(td->td_stripoffset_entry), 0, sizeof(TIFFDirEntry)); + _TIFFmemset( &(td->td_stripbytecount_entry), 0, sizeof(TIFFDirEntry)); +#endif +} +#undef CleanupField + +/* + * Client Tag extension support (from Niles Ritter). + */ +static TIFFExtendProc _TIFFextender = (TIFFExtendProc) NULL; + +TIFFExtendProc +TIFFSetTagExtender(TIFFExtendProc extender) +{ + TIFFExtendProc prev = _TIFFextender; + _TIFFextender = extender; + return (prev); +} + +/* + * Setup for a new directory. Should we automatically call + * TIFFWriteDirectory() if the current one is dirty? + * + * The newly created directory will not exist on the file till + * TIFFWriteDirectory(), TIFFFlush() or TIFFClose() is called. + */ +int +TIFFCreateDirectory(TIFF* tif) +{ + TIFFDefaultDirectory(tif); + tif->tif_diroff = 0; + tif->tif_nextdiroff = 0; + tif->tif_curoff = 0; + tif->tif_row = (uint32) -1; + tif->tif_curstrip = (uint32) -1; + + return 0; +} + +int +TIFFCreateCustomDirectory(TIFF* tif, const TIFFFieldArray* infoarray) +{ + TIFFDefaultDirectory(tif); + + /* + * Reset the field definitions to match the application provided list. + * Hopefully TIFFDefaultDirectory() won't have done anything irreversable + * based on it's assumption this is an image directory. + */ + _TIFFSetupFields(tif, infoarray); + + tif->tif_diroff = 0; + tif->tif_nextdiroff = 0; + tif->tif_curoff = 0; + tif->tif_row = (uint32) -1; + tif->tif_curstrip = (uint32) -1; + + return 0; +} + +int +TIFFCreateEXIFDirectory(TIFF* tif) +{ + const TIFFFieldArray* exifFieldArray; + exifFieldArray = _TIFFGetExifFields(); + return TIFFCreateCustomDirectory(tif, exifFieldArray); +} + +/* + * Setup a default directory structure. + */ +int +TIFFDefaultDirectory(TIFF* tif) +{ + register TIFFDirectory* td = &tif->tif_dir; + const TIFFFieldArray* tiffFieldArray; + + tiffFieldArray = _TIFFGetFields(); + _TIFFSetupFields(tif, tiffFieldArray); + + _TIFFmemset(td, 0, sizeof (*td)); + td->td_fillorder = FILLORDER_MSB2LSB; + td->td_bitspersample = 1; + td->td_threshholding = THRESHHOLD_BILEVEL; + td->td_orientation = ORIENTATION_TOPLEFT; + td->td_samplesperpixel = 1; + td->td_rowsperstrip = (uint32) -1; + td->td_tilewidth = 0; + td->td_tilelength = 0; + td->td_tiledepth = 1; + td->td_stripbytecountsorted = 1; /* Our own arrays always sorted. */ + td->td_resolutionunit = RESUNIT_INCH; + td->td_sampleformat = SAMPLEFORMAT_UINT; + td->td_imagedepth = 1; + td->td_ycbcrsubsampling[0] = 2; + td->td_ycbcrsubsampling[1] = 2; + td->td_ycbcrpositioning = YCBCRPOSITION_CENTERED; + tif->tif_postdecode = _TIFFNoPostDecode; + tif->tif_foundfield = NULL; + tif->tif_tagmethods.vsetfield = _TIFFVSetField; + tif->tif_tagmethods.vgetfield = _TIFFVGetField; + tif->tif_tagmethods.printdir = NULL; + /* + * Give client code a chance to install their own + * tag extensions & methods, prior to compression overloads. + */ + if (_TIFFextender) + (*_TIFFextender)(tif); + (void) TIFFSetField(tif, TIFFTAG_COMPRESSION, COMPRESSION_NONE); + /* + * NB: The directory is marked dirty as a result of setting + * up the default compression scheme. However, this really + * isn't correct -- we want TIFF_DIRTYDIRECT to be set only + * if the user does something. We could just do the setup + * by hand, but it seems better to use the normal mechanism + * (i.e. TIFFSetField). + */ + tif->tif_flags &= ~TIFF_DIRTYDIRECT; + + /* + * As per http://bugzilla.remotesensing.org/show_bug.cgi?id=19 + * we clear the ISTILED flag when setting up a new directory. + * Should we also be clearing stuff like INSUBIFD? + */ + tif->tif_flags &= ~TIFF_ISTILED; + + return (1); +} + +static int +TIFFAdvanceDirectory(TIFF* tif, uint64* nextdir, uint64* off) +{ + static const char module[] = "TIFFAdvanceDirectory"; + if (isMapped(tif)) + { + uint64 poff=*nextdir; + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + tmsize_t poffa,poffb,poffc,poffd; + uint16 dircount; + uint32 nextdir32; + poffa=(tmsize_t)poff; + poffb=poffa+sizeof(uint16); + if (((uint64)poffa!=poff)||(poffbtif->tif_size)) + { + TIFFErrorExt(tif->tif_clientdata,module,"Error fetching directory count"); + return(0); + } + _TIFFmemcpy(&dircount,tif->tif_base+poffa,sizeof(uint16)); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort(&dircount); + poffc=poffb+dircount*12; + poffd=poffc+sizeof(uint32); + if ((poffctif->tif_size)) + { + TIFFErrorExt(tif->tif_clientdata,module,"Error fetching directory link"); + return(0); + } + if (off!=NULL) + *off=(uint64)poffc; + _TIFFmemcpy(&nextdir32,tif->tif_base+poffc,sizeof(uint32)); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&nextdir32); + *nextdir=nextdir32; + } + else + { + tmsize_t poffa,poffb,poffc,poffd; + uint64 dircount64; + uint16 dircount16; + poffa=(tmsize_t)poff; + poffb=poffa+sizeof(uint64); + if (((uint64)poffa!=poff)||(poffbtif->tif_size)) + { + TIFFErrorExt(tif->tif_clientdata,module,"Error fetching directory count"); + return(0); + } + _TIFFmemcpy(&dircount64,tif->tif_base+poffa,sizeof(uint64)); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8(&dircount64); + if (dircount64>0xFFFF) + { + TIFFErrorExt(tif->tif_clientdata,module,"Sanity check on directory count failed"); + return(0); + } + dircount16=(uint16)dircount64; + poffc=poffb+dircount16*20; + poffd=poffc+sizeof(uint64); + if ((poffctif->tif_size)) + { + TIFFErrorExt(tif->tif_clientdata,module,"Error fetching directory link"); + return(0); + } + if (off!=NULL) + *off=(uint64)poffc; + _TIFFmemcpy(nextdir,tif->tif_base+poffc,sizeof(uint64)); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8(nextdir); + } + return(1); + } + else + { + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint16 dircount; + uint32 nextdir32; + if (!SeekOK(tif, *nextdir) || + !ReadOK(tif, &dircount, sizeof (uint16))) { + TIFFErrorExt(tif->tif_clientdata, module, "%s: Error fetching directory count", + tif->tif_name); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabShort(&dircount); + if (off != NULL) + *off = TIFFSeekFile(tif, + dircount*12, SEEK_CUR); + else + (void) TIFFSeekFile(tif, + dircount*12, SEEK_CUR); + if (!ReadOK(tif, &nextdir32, sizeof (uint32))) { + TIFFErrorExt(tif->tif_clientdata, module, "%s: Error fetching directory link", + tif->tif_name); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong(&nextdir32); + *nextdir=nextdir32; + } + else + { + uint64 dircount64; + uint16 dircount16; + if (!SeekOK(tif, *nextdir) || + !ReadOK(tif, &dircount64, sizeof (uint64))) { + TIFFErrorExt(tif->tif_clientdata, module, "%s: Error fetching directory count", + tif->tif_name); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(&dircount64); + if (dircount64>0xFFFF) + { + TIFFErrorExt(tif->tif_clientdata, module, "Error fetching directory count"); + return(0); + } + dircount16 = (uint16)dircount64; + if (off != NULL) + *off = TIFFSeekFile(tif, + dircount16*20, SEEK_CUR); + else + (void) TIFFSeekFile(tif, + dircount16*20, SEEK_CUR); + if (!ReadOK(tif, nextdir, sizeof (uint64))) { + TIFFErrorExt(tif->tif_clientdata, module, "%s: Error fetching directory link", + tif->tif_name); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(nextdir); + } + return (1); + } +} + +/* + * Count the number of directories in a file. + */ +uint16 +TIFFNumberOfDirectories(TIFF* tif) +{ + uint64 nextdir; + uint16 n; + if (!(tif->tif_flags&TIFF_BIGTIFF)) + nextdir = tif->tif_header.classic.tiff_diroff; + else + nextdir = tif->tif_header.big.tiff_diroff; + n = 0; + while (nextdir != 0 && TIFFAdvanceDirectory(tif, &nextdir, NULL)) + n++; + return (n); +} + +/* + * Set the n-th directory as the current directory. + * NB: Directories are numbered starting at 0. + */ +int +TIFFSetDirectory(TIFF* tif, uint16 dirn) +{ + uint64 nextdir; + uint16 n; + + if (!(tif->tif_flags&TIFF_BIGTIFF)) + nextdir = tif->tif_header.classic.tiff_diroff; + else + nextdir = tif->tif_header.big.tiff_diroff; + for (n = dirn; n > 0 && nextdir != 0; n--) + if (!TIFFAdvanceDirectory(tif, &nextdir, NULL)) + return (0); + tif->tif_nextdiroff = nextdir; + /* + * Set curdir to the actual directory index. The + * -1 is because TIFFReadDirectory will increment + * tif_curdir after successfully reading the directory. + */ + tif->tif_curdir = (dirn - n) - 1; + /* + * Reset tif_dirnumber counter and start new list of seen directories. + * We need this to prevent IFD loops. + */ + tif->tif_dirnumber = 0; + return (TIFFReadDirectory(tif)); +} + +/* + * Set the current directory to be the directory + * located at the specified file offset. This interface + * is used mainly to access directories linked with + * the SubIFD tag (e.g. thumbnail images). + */ +int +TIFFSetSubDirectory(TIFF* tif, uint64 diroff) +{ + tif->tif_nextdiroff = diroff; + /* + * Reset tif_dirnumber counter and start new list of seen directories. + * We need this to prevent IFD loops. + */ + tif->tif_dirnumber = 0; + return (TIFFReadDirectory(tif)); +} + +/* + * Return file offset of the current directory. + */ +uint64 +TIFFCurrentDirOffset(TIFF* tif) +{ + return (tif->tif_diroff); +} + +/* + * Return an indication of whether or not we are + * at the last directory in the file. + */ +int +TIFFLastDirectory(TIFF* tif) +{ + return (tif->tif_nextdiroff == 0); +} + +/* + * Unlink the specified directory from the directory chain. + */ +int +TIFFUnlinkDirectory(TIFF* tif, uint16 dirn) +{ + static const char module[] = "TIFFUnlinkDirectory"; + uint64 nextdir; + uint64 off; + uint16 n; + + if (tif->tif_mode == O_RDONLY) { + TIFFErrorExt(tif->tif_clientdata, module, + "Can not unlink directory in read-only file"); + return (0); + } + /* + * Go to the directory before the one we want + * to unlink and nab the offset of the link + * field we'll need to patch. + */ + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + nextdir = tif->tif_header.classic.tiff_diroff; + off = 4; + } + else + { + nextdir = tif->tif_header.big.tiff_diroff; + off = 8; + } + for (n = dirn-1; n > 0; n--) { + if (nextdir == 0) { + TIFFErrorExt(tif->tif_clientdata, module, "Directory %d does not exist", dirn); + return (0); + } + if (!TIFFAdvanceDirectory(tif, &nextdir, &off)) + return (0); + } + /* + * Advance to the directory to be unlinked and fetch + * the offset of the directory that follows. + */ + if (!TIFFAdvanceDirectory(tif, &nextdir, NULL)) + return (0); + /* + * Go back and patch the link field of the preceding + * directory to point to the offset of the directory + * that follows. + */ + (void) TIFFSeekFile(tif, off, SEEK_SET); + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint32 nextdir32; + nextdir32=(uint32)nextdir; + assert((uint64)nextdir32==nextdir); + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong(&nextdir32); + if (!WriteOK(tif, &nextdir32, sizeof (uint32))) { + TIFFErrorExt(tif->tif_clientdata, module, "Error writing directory link"); + return (0); + } + } + else + { + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(&nextdir); + if (!WriteOK(tif, &nextdir, sizeof (uint64))) { + TIFFErrorExt(tif->tif_clientdata, module, "Error writing directory link"); + return (0); + } + } + /* + * Leave directory state setup safely. We don't have + * facilities for doing inserting and removing directories, + * so it's safest to just invalidate everything. This + * means that the caller can only append to the directory + * chain. + */ + (*tif->tif_cleanup)(tif); + if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) { + _TIFFfree(tif->tif_rawdata); + tif->tif_rawdata = NULL; + tif->tif_rawcc = 0; + tif->tif_rawdataoff = 0; + tif->tif_rawdataloaded = 0; + } + tif->tif_flags &= ~(TIFF_BEENWRITING|TIFF_BUFFERSETUP|TIFF_POSTENCODE|TIFF_BUF4WRITE); + TIFFFreeDirectory(tif); + TIFFDefaultDirectory(tif); + tif->tif_diroff = 0; /* force link on next write */ + tif->tif_nextdiroff = 0; /* next write must be at end */ + tif->tif_curoff = 0; + tif->tif_row = (uint32) -1; + tif->tif_curstrip = (uint32) -1; + return (1); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_dir.h b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dir.h new file mode 100644 index 000000000..6af5f3dc3 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dir.h @@ -0,0 +1,308 @@ +/* $Id: tif_dir.h,v 1.54 2011-02-18 20:53:05 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _TIFFDIR_ +#define _TIFFDIR_ +/* + * ``Library-private'' Directory-related Definitions. + */ + +typedef struct { + const TIFFField *info; + int count; + void *value; +} TIFFTagValue; + +/* + * TIFF Image File Directories are comprised of a table of field + * descriptors of the form shown below. The table is sorted in + * ascending order by tag. The values associated with each entry are + * disjoint and may appear anywhere in the file (so long as they are + * placed on a word boundary). + * + * If the value is 4 bytes or less, in ClassicTIFF, or 8 bytes or less in + * BigTIFF, then it is placed in the offset field to save space. If so, + * it is left-justified in the offset field. + */ +typedef struct { + uint16 tdir_tag; /* see below */ + uint16 tdir_type; /* data type; see below */ + uint64 tdir_count; /* number of items; length in spec */ + union { + uint16 toff_short; + uint32 toff_long; + uint64 toff_long8; + } tdir_offset; /* either offset or the data itself if fits */ +} TIFFDirEntry; + +/* + * Internal format of a TIFF directory entry. + */ +typedef struct { +#define FIELD_SETLONGS 4 + /* bit vector of fields that are set */ + unsigned long td_fieldsset[FIELD_SETLONGS]; + + uint32 td_imagewidth, td_imagelength, td_imagedepth; + uint32 td_tilewidth, td_tilelength, td_tiledepth; + uint32 td_subfiletype; + uint16 td_bitspersample; + uint16 td_sampleformat; + uint16 td_compression; + uint16 td_photometric; + uint16 td_threshholding; + uint16 td_fillorder; + uint16 td_orientation; + uint16 td_samplesperpixel; + uint32 td_rowsperstrip; + uint16 td_minsamplevalue, td_maxsamplevalue; + double* td_sminsamplevalue; + double* td_smaxsamplevalue; + float td_xresolution, td_yresolution; + uint16 td_resolutionunit; + uint16 td_planarconfig; + float td_xposition, td_yposition; + uint16 td_pagenumber[2]; + uint16* td_colormap[3]; + uint16 td_halftonehints[2]; + uint16 td_extrasamples; + uint16* td_sampleinfo; + /* even though the name is misleading, td_stripsperimage is the number + * of striles (=strips or tiles) per plane, and td_nstrips the total + * number of striles */ + uint32 td_stripsperimage; + uint32 td_nstrips; /* size of offset & bytecount arrays */ + uint64* td_stripoffset; + uint64* td_stripbytecount; + int td_stripbytecountsorted; /* is the bytecount array sorted ascending? */ +#if defined(DEFER_STRILE_LOAD) + TIFFDirEntry td_stripoffset_entry; /* for deferred loading */ + TIFFDirEntry td_stripbytecount_entry; /* for deferred loading */ +#endif + uint16 td_nsubifd; + uint64* td_subifd; + /* YCbCr parameters */ + uint16 td_ycbcrsubsampling[2]; + uint16 td_ycbcrpositioning; + /* Colorimetry parameters */ + uint16* td_transferfunction[3]; + float* td_refblackwhite; + /* CMYK parameters */ + int td_inknameslen; + char* td_inknames; + + int td_customValueCount; + TIFFTagValue *td_customValues; +} TIFFDirectory; + +/* + * Field flags used to indicate fields that have been set in a directory, and + * to reference fields when manipulating a directory. + */ + +/* + * FIELD_IGNORE is used to signify tags that are to be processed but otherwise + * ignored. This permits antiquated tags to be quietly read and discarded. + * Note that a bit *is* allocated for ignored tags; this is understood by the + * directory reading logic which uses this fact to avoid special-case handling + */ +#define FIELD_IGNORE 0 + +/* multi-item fields */ +#define FIELD_IMAGEDIMENSIONS 1 +#define FIELD_TILEDIMENSIONS 2 +#define FIELD_RESOLUTION 3 +#define FIELD_POSITION 4 + +/* single-item fields */ +#define FIELD_SUBFILETYPE 5 +#define FIELD_BITSPERSAMPLE 6 +#define FIELD_COMPRESSION 7 +#define FIELD_PHOTOMETRIC 8 +#define FIELD_THRESHHOLDING 9 +#define FIELD_FILLORDER 10 +#define FIELD_ORIENTATION 15 +#define FIELD_SAMPLESPERPIXEL 16 +#define FIELD_ROWSPERSTRIP 17 +#define FIELD_MINSAMPLEVALUE 18 +#define FIELD_MAXSAMPLEVALUE 19 +#define FIELD_PLANARCONFIG 20 +#define FIELD_RESOLUTIONUNIT 22 +#define FIELD_PAGENUMBER 23 +#define FIELD_STRIPBYTECOUNTS 24 +#define FIELD_STRIPOFFSETS 25 +#define FIELD_COLORMAP 26 +#define FIELD_EXTRASAMPLES 31 +#define FIELD_SAMPLEFORMAT 32 +#define FIELD_SMINSAMPLEVALUE 33 +#define FIELD_SMAXSAMPLEVALUE 34 +#define FIELD_IMAGEDEPTH 35 +#define FIELD_TILEDEPTH 36 +#define FIELD_HALFTONEHINTS 37 +#define FIELD_YCBCRSUBSAMPLING 39 +#define FIELD_YCBCRPOSITIONING 40 +#define FIELD_REFBLACKWHITE 41 +#define FIELD_TRANSFERFUNCTION 44 +#define FIELD_INKNAMES 46 +#define FIELD_SUBIFD 49 +/* FIELD_CUSTOM (see tiffio.h) 65 */ +/* end of support for well-known tags; codec-private tags follow */ +#define FIELD_CODEC 66 /* base of codec-private tags */ + + +/* + * Pseudo-tags don't normally need field bits since they are not written to an + * output file (by definition). The library also has express logic to always + * query a codec for a pseudo-tag so allocating a field bit for one is a + * waste. If codec wants to promote the notion of a pseudo-tag being ``set'' + * or ``unset'' then it can do using internal state flags without polluting + * the field bit space defined for real tags. + */ +#define FIELD_PSEUDO 0 + +#define FIELD_LAST (32*FIELD_SETLONGS-1) + +#define BITn(n) (((unsigned long)1L)<<((n)&0x1f)) +#define BITFIELDn(tif, n) ((tif)->tif_dir.td_fieldsset[(n)/32]) +#define TIFFFieldSet(tif, field) (BITFIELDn(tif, field) & BITn(field)) +#define TIFFSetFieldBit(tif, field) (BITFIELDn(tif, field) |= BITn(field)) +#define TIFFClrFieldBit(tif, field) (BITFIELDn(tif, field) &= ~BITn(field)) + +#define FieldSet(fields, f) (fields[(f)/32] & BITn(f)) +#define ResetFieldBit(fields, f) (fields[(f)/32] &= ~BITn(f)) + +typedef enum { + TIFF_SETGET_UNDEFINED = 0, + TIFF_SETGET_ASCII = 1, + TIFF_SETGET_UINT8 = 2, + TIFF_SETGET_SINT8 = 3, + TIFF_SETGET_UINT16 = 4, + TIFF_SETGET_SINT16 = 5, + TIFF_SETGET_UINT32 = 6, + TIFF_SETGET_SINT32 = 7, + TIFF_SETGET_UINT64 = 8, + TIFF_SETGET_SINT64 = 9, + TIFF_SETGET_FLOAT = 10, + TIFF_SETGET_DOUBLE = 11, + TIFF_SETGET_IFD8 = 12, + TIFF_SETGET_INT = 13, + TIFF_SETGET_UINT16_PAIR = 14, + TIFF_SETGET_C0_ASCII = 15, + TIFF_SETGET_C0_UINT8 = 16, + TIFF_SETGET_C0_SINT8 = 17, + TIFF_SETGET_C0_UINT16 = 18, + TIFF_SETGET_C0_SINT16 = 19, + TIFF_SETGET_C0_UINT32 = 20, + TIFF_SETGET_C0_SINT32 = 21, + TIFF_SETGET_C0_UINT64 = 22, + TIFF_SETGET_C0_SINT64 = 23, + TIFF_SETGET_C0_FLOAT = 24, + TIFF_SETGET_C0_DOUBLE = 25, + TIFF_SETGET_C0_IFD8 = 26, + TIFF_SETGET_C16_ASCII = 27, + TIFF_SETGET_C16_UINT8 = 28, + TIFF_SETGET_C16_SINT8 = 29, + TIFF_SETGET_C16_UINT16 = 30, + TIFF_SETGET_C16_SINT16 = 31, + TIFF_SETGET_C16_UINT32 = 32, + TIFF_SETGET_C16_SINT32 = 33, + TIFF_SETGET_C16_UINT64 = 34, + TIFF_SETGET_C16_SINT64 = 35, + TIFF_SETGET_C16_FLOAT = 36, + TIFF_SETGET_C16_DOUBLE = 37, + TIFF_SETGET_C16_IFD8 = 38, + TIFF_SETGET_C32_ASCII = 39, + TIFF_SETGET_C32_UINT8 = 40, + TIFF_SETGET_C32_SINT8 = 41, + TIFF_SETGET_C32_UINT16 = 42, + TIFF_SETGET_C32_SINT16 = 43, + TIFF_SETGET_C32_UINT32 = 44, + TIFF_SETGET_C32_SINT32 = 45, + TIFF_SETGET_C32_UINT64 = 46, + TIFF_SETGET_C32_SINT64 = 47, + TIFF_SETGET_C32_FLOAT = 48, + TIFF_SETGET_C32_DOUBLE = 49, + TIFF_SETGET_C32_IFD8 = 50, + TIFF_SETGET_OTHER = 51 +} TIFFSetGetFieldType; + +#if defined(__cplusplus) +extern "C" { +#endif + +extern const TIFFFieldArray* _TIFFGetFields(void); +extern const TIFFFieldArray* _TIFFGetExifFields(void); +extern void _TIFFSetupFields(TIFF* tif, const TIFFFieldArray* infoarray); +extern void _TIFFPrintFieldInfo(TIFF*, FILE*); + +extern int _TIFFFillStriles(TIFF*); + +typedef enum { + tfiatImage, + tfiatExif, + tfiatOther +} TIFFFieldArrayType; + +struct _TIFFFieldArray { + TIFFFieldArrayType type; /* array type, will be used to determine if IFD is image and such */ + uint32 allocated_size; /* 0 if array is constant, other if modified by future definition extension support */ + uint32 count; /* number of elements in fields array */ + TIFFField* fields; /* actual field info */ +}; + +struct _TIFFField { + uint32 field_tag; /* field's tag */ + short field_readcount; /* read count/TIFF_VARIABLE/TIFF_SPP */ + short field_writecount; /* write count/TIFF_VARIABLE */ + TIFFDataType field_type; /* type of associated data */ + uint32 reserved; /* reserved for future extension */ + TIFFSetGetFieldType set_field_type; /* type to be passed to TIFFSetField */ + TIFFSetGetFieldType get_field_type; /* type to be passed to TIFFGetField */ + unsigned short field_bit; /* bit in fieldsset bit vector */ + unsigned char field_oktochange; /* if true, can change while writing */ + unsigned char field_passcount; /* if true, pass dir count on set */ + char* field_name; /* ASCII name */ + TIFFFieldArray* field_subfields; /* if field points to child ifds, child ifd field definition array */ +}; + +extern int _TIFFMergeFields(TIFF*, const TIFFField[], uint32); +extern const TIFFField* _TIFFFindOrRegisterField(TIFF *, uint32, TIFFDataType); +extern TIFFField* _TIFFCreateAnonField(TIFF *, uint32, TIFFDataType); + +#if defined(__cplusplus) +} +#endif +#endif /* _TIFFDIR_ */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_dirinfo.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dirinfo.c new file mode 100644 index 000000000..d3199318f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dirinfo.c @@ -0,0 +1,957 @@ +/* $Id: tif_dirinfo.c,v 1.117 2012-08-19 16:56:34 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * Core Directory Tag Support. + */ +#include "tiffiop.h" +#include + +/* + * NOTE: THIS ARRAY IS ASSUMED TO BE SORTED BY TAG. + * + * NOTE: The second field (field_readcount) and third field (field_writecount) + * sometimes use the values TIFF_VARIABLE (-1), TIFF_VARIABLE2 (-3) + * and TIFF_SPP (-2). The macros should be used but would throw off + * the formatting of the code, so please interprete the -1, -2 and -3 + * values accordingly. + */ + +static TIFFFieldArray tiffFieldArray; +static TIFFFieldArray exifFieldArray; + +static TIFFField +tiffFields[] = { + { TIFFTAG_SUBFILETYPE, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_SUBFILETYPE, 1, 0, "SubfileType", NULL }, + { TIFFTAG_OSUBFILETYPE, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_SUBFILETYPE, 1, 0, "OldSubfileType", NULL }, + { TIFFTAG_IMAGEWIDTH, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_IMAGEDIMENSIONS, 0, 0, "ImageWidth", NULL }, + { TIFFTAG_IMAGELENGTH, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_IMAGEDIMENSIONS, 1, 0, "ImageLength", NULL }, + { TIFFTAG_BITSPERSAMPLE, -1, -1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_BITSPERSAMPLE, 0, 0, "BitsPerSample", NULL }, + { TIFFTAG_COMPRESSION, -1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_COMPRESSION, 0, 0, "Compression", NULL }, + { TIFFTAG_PHOTOMETRIC, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_PHOTOMETRIC, 0, 0, "PhotometricInterpretation", NULL }, + { TIFFTAG_THRESHHOLDING, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_THRESHHOLDING, 1, 0, "Threshholding", NULL }, + { TIFFTAG_CELLWIDTH, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_IGNORE, 1, 0, "CellWidth", NULL }, + { TIFFTAG_CELLLENGTH, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_IGNORE, 1, 0, "CellLength", NULL }, + { TIFFTAG_FILLORDER, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_FILLORDER, 0, 0, "FillOrder", NULL }, + { TIFFTAG_DOCUMENTNAME, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "DocumentName", NULL }, + { TIFFTAG_IMAGEDESCRIPTION, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ImageDescription", NULL }, + { TIFFTAG_MAKE, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "Make", NULL }, + { TIFFTAG_MODEL, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "Model", NULL }, + { TIFFTAG_STRIPOFFSETS, -1, -1, TIFF_LONG8, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_STRIPOFFSETS, 0, 0, "StripOffsets", NULL }, + { TIFFTAG_ORIENTATION, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_ORIENTATION, 0, 0, "Orientation", NULL }, + { TIFFTAG_SAMPLESPERPIXEL, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_SAMPLESPERPIXEL, 0, 0, "SamplesPerPixel", NULL }, + { TIFFTAG_ROWSPERSTRIP, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_ROWSPERSTRIP, 0, 0, "RowsPerStrip", NULL }, + { TIFFTAG_STRIPBYTECOUNTS, -1, -1, TIFF_LONG8, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_STRIPBYTECOUNTS, 0, 0, "StripByteCounts", NULL }, + { TIFFTAG_MINSAMPLEVALUE, -2, -1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_MINSAMPLEVALUE, 1, 0, "MinSampleValue", NULL }, + { TIFFTAG_MAXSAMPLEVALUE, -2, -1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_MAXSAMPLEVALUE, 1, 0, "MaxSampleValue", NULL }, + { TIFFTAG_XRESOLUTION, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_RESOLUTION, 1, 0, "XResolution", NULL }, + { TIFFTAG_YRESOLUTION, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_RESOLUTION, 1, 0, "YResolution", NULL }, + { TIFFTAG_PLANARCONFIG, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_PLANARCONFIG, 0, 0, "PlanarConfiguration", NULL }, + { TIFFTAG_PAGENAME, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "PageName", NULL }, + { TIFFTAG_XPOSITION, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_POSITION, 1, 0, "XPosition", NULL }, + { TIFFTAG_YPOSITION, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_POSITION, 1, 0, "YPosition", NULL }, + { TIFFTAG_FREEOFFSETS, -1, -1, TIFF_LONG8, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_IGNORE, 0, 0, "FreeOffsets", NULL }, + { TIFFTAG_FREEBYTECOUNTS, -1, -1, TIFF_LONG8, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_IGNORE, 0, 0, "FreeByteCounts", NULL }, + { TIFFTAG_GRAYRESPONSEUNIT, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_IGNORE, 1, 0, "GrayResponseUnit", NULL }, + { TIFFTAG_GRAYRESPONSECURVE, -1, -1, TIFF_SHORT, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_IGNORE, 1, 0, "GrayResponseCurve", NULL }, + { TIFFTAG_RESOLUTIONUNIT, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_RESOLUTIONUNIT, 1, 0, "ResolutionUnit", NULL }, + { TIFFTAG_PAGENUMBER, 2, 2, TIFF_SHORT, 0, TIFF_SETGET_UINT16_PAIR, TIFF_SETGET_UNDEFINED, FIELD_PAGENUMBER, 1, 0, "PageNumber", NULL }, + { TIFFTAG_COLORRESPONSEUNIT, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_IGNORE, 1, 0, "ColorResponseUnit", NULL }, + { TIFFTAG_TRANSFERFUNCTION, -1, -1, TIFF_SHORT, 0, TIFF_SETGET_OTHER, TIFF_SETGET_UNDEFINED, FIELD_TRANSFERFUNCTION, 1, 0, "TransferFunction", NULL }, + { TIFFTAG_SOFTWARE, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "Software", NULL }, + { TIFFTAG_DATETIME, 20, 20, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "DateTime", NULL }, + { TIFFTAG_ARTIST, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "Artist", NULL }, + { TIFFTAG_HOSTCOMPUTER, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "HostComputer", NULL }, + { TIFFTAG_WHITEPOINT, 2, 2, TIFF_RATIONAL, 0, TIFF_SETGET_C0_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "WhitePoint", NULL }, + { TIFFTAG_PRIMARYCHROMATICITIES, 6, 6, TIFF_RATIONAL, 0, TIFF_SETGET_C0_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "PrimaryChromaticities", NULL }, + { TIFFTAG_COLORMAP, -1, -1, TIFF_SHORT, 0, TIFF_SETGET_OTHER, TIFF_SETGET_UNDEFINED, FIELD_COLORMAP, 1, 0, "ColorMap", NULL }, + { TIFFTAG_HALFTONEHINTS, 2, 2, TIFF_SHORT, 0, TIFF_SETGET_UINT16_PAIR, TIFF_SETGET_UNDEFINED, FIELD_HALFTONEHINTS, 1, 0, "HalftoneHints", NULL }, + { TIFFTAG_TILEWIDTH, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_TILEDIMENSIONS, 0, 0, "TileWidth", NULL }, + { TIFFTAG_TILELENGTH, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_TILEDIMENSIONS, 0, 0, "TileLength", NULL }, + { TIFFTAG_TILEOFFSETS, -1, 1, TIFF_LONG8, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_STRIPOFFSETS, 0, 0, "TileOffsets", NULL }, + { TIFFTAG_TILEBYTECOUNTS, -1, 1, TIFF_LONG8, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_STRIPBYTECOUNTS, 0, 0, "TileByteCounts", NULL }, + { TIFFTAG_SUBIFD, -1, -1, TIFF_IFD8, 0, TIFF_SETGET_C16_IFD8, TIFF_SETGET_UNDEFINED, FIELD_SUBIFD, 1, 1, "SubIFD", &tiffFieldArray }, + { TIFFTAG_INKSET, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "InkSet", NULL }, + { TIFFTAG_INKNAMES, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_C16_ASCII, TIFF_SETGET_UNDEFINED, FIELD_INKNAMES, 1, 1, "InkNames", NULL }, + { TIFFTAG_NUMBEROFINKS, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "NumberOfInks", NULL }, + { TIFFTAG_DOTRANGE, 2, 2, TIFF_SHORT, 0, TIFF_SETGET_UINT16_PAIR, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "DotRange", NULL }, + { TIFFTAG_TARGETPRINTER, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "TargetPrinter", NULL }, + { TIFFTAG_EXTRASAMPLES, -1, -1, TIFF_SHORT, 0, TIFF_SETGET_C16_UINT16, TIFF_SETGET_UNDEFINED, FIELD_EXTRASAMPLES, 0, 1, "ExtraSamples", NULL }, + { TIFFTAG_SAMPLEFORMAT, -1, -1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_SAMPLEFORMAT, 0, 0, "SampleFormat", NULL }, + { TIFFTAG_SMINSAMPLEVALUE, -2, -1, TIFF_ANY, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_SMINSAMPLEVALUE, 1, 0, "SMinSampleValue", NULL }, + { TIFFTAG_SMAXSAMPLEVALUE, -2, -1, TIFF_ANY, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_SMAXSAMPLEVALUE, 1, 0, "SMaxSampleValue", NULL }, + { TIFFTAG_CLIPPATH, -1, -3, TIFF_BYTE, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "ClipPath", NULL }, + { TIFFTAG_XCLIPPATHUNITS, 1, 1, TIFF_SLONG, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "XClipPathUnits", NULL }, + { TIFFTAG_XCLIPPATHUNITS, 1, 1, TIFF_SBYTE, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "XClipPathUnits", NULL }, + { TIFFTAG_YCLIPPATHUNITS, 1, 1, TIFF_SLONG, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "YClipPathUnits", NULL }, + { TIFFTAG_YCBCRCOEFFICIENTS, 3, 3, TIFF_RATIONAL, 0, TIFF_SETGET_C0_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "YCbCrCoefficients", NULL }, + { TIFFTAG_YCBCRSUBSAMPLING, 2, 2, TIFF_SHORT, 0, TIFF_SETGET_UINT16_PAIR, TIFF_SETGET_UNDEFINED, FIELD_YCBCRSUBSAMPLING, 0, 0, "YCbCrSubsampling", NULL }, + { TIFFTAG_YCBCRPOSITIONING, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_YCBCRPOSITIONING, 0, 0, "YCbCrPositioning", NULL }, + { TIFFTAG_REFERENCEBLACKWHITE, 6, 6, TIFF_RATIONAL, 0, TIFF_SETGET_C0_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_REFBLACKWHITE, 1, 0, "ReferenceBlackWhite", NULL }, + { TIFFTAG_XMLPACKET, -3, -3, TIFF_BYTE, 0, TIFF_SETGET_C32_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "XMLPacket", NULL }, + /* begin SGI tags */ + { TIFFTAG_MATTEING, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_EXTRASAMPLES, 0, 0, "Matteing", NULL }, + { TIFFTAG_DATATYPE, -2, -1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_SAMPLEFORMAT, 0, 0, "DataType", NULL }, + { TIFFTAG_IMAGEDEPTH, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_IMAGEDEPTH, 0, 0, "ImageDepth", NULL }, + { TIFFTAG_TILEDEPTH, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_TILEDEPTH, 0, 0, "TileDepth", NULL }, + /* end SGI tags */ + /* begin Pixar tags */ + { TIFFTAG_PIXAR_IMAGEFULLWIDTH, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ImageFullWidth", NULL }, + { TIFFTAG_PIXAR_IMAGEFULLLENGTH, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ImageFullLength", NULL }, + { TIFFTAG_PIXAR_TEXTUREFORMAT, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "TextureFormat", NULL }, + { TIFFTAG_PIXAR_WRAPMODES, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "TextureWrapModes", NULL }, + { TIFFTAG_PIXAR_FOVCOT, 1, 1, TIFF_FLOAT, 0, TIFF_SETGET_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "FieldOfViewCotangent", NULL }, + { TIFFTAG_PIXAR_MATRIX_WORLDTOSCREEN, 16, 16, TIFF_FLOAT, 0, TIFF_SETGET_C0_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "MatrixWorldToScreen", NULL }, + { TIFFTAG_PIXAR_MATRIX_WORLDTOCAMERA, 16, 16, TIFF_FLOAT, 0, TIFF_SETGET_C0_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "MatrixWorldToCamera", NULL }, + { TIFFTAG_COPYRIGHT, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "Copyright", NULL }, + /* end Pixar tags */ + { TIFFTAG_RICHTIFFIPTC, -3, -3, TIFF_LONG, 0, TIFF_SETGET_C32_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "RichTIFFIPTC", NULL }, + { TIFFTAG_PHOTOSHOP, -3, -3, TIFF_BYTE, 0, TIFF_SETGET_C32_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "Photoshop", NULL }, + { TIFFTAG_EXIFIFD, 1, 1, TIFF_IFD8, 0, TIFF_SETGET_IFD8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "EXIFIFDOffset", &exifFieldArray }, + { TIFFTAG_ICCPROFILE, -3, -3, TIFF_UNDEFINED, 0, TIFF_SETGET_C32_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "ICC Profile", NULL }, + { TIFFTAG_GPSIFD, 1, 1, TIFF_IFD8, 0, TIFF_SETGET_IFD8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "GPSIFDOffset", NULL }, + { TIFFTAG_FAXRECVPARAMS, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UINT32, FIELD_CUSTOM, TRUE, FALSE, "FaxRecvParams", NULL }, + { TIFFTAG_FAXSUBADDRESS, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_ASCII, FIELD_CUSTOM, TRUE, FALSE, "FaxSubAddress", NULL }, + { TIFFTAG_FAXRECVTIME, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UINT32, FIELD_CUSTOM, TRUE, FALSE, "FaxRecvTime", NULL }, + { TIFFTAG_FAXDCS, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_ASCII, FIELD_CUSTOM, TRUE, FALSE, "FaxDcs", NULL }, + { TIFFTAG_STONITS, 1, 1, TIFF_DOUBLE, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "StoNits", NULL }, + { TIFFTAG_INTEROPERABILITYIFD, 1, 1, TIFF_IFD8, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "InteroperabilityIFDOffset", NULL }, + /* begin DNG tags */ + { TIFFTAG_DNGVERSION, 4, 4, TIFF_BYTE, 0, TIFF_SETGET_C0_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "DNGVersion", NULL }, + { TIFFTAG_DNGBACKWARDVERSION, 4, 4, TIFF_BYTE, 0, TIFF_SETGET_C0_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "DNGBackwardVersion", NULL }, + { TIFFTAG_UNIQUECAMERAMODEL, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "UniqueCameraModel", NULL }, + { TIFFTAG_LOCALIZEDCAMERAMODEL, -1, -1, TIFF_BYTE, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 1, "LocalizedCameraModel", NULL }, + { TIFFTAG_CFAPLANECOLOR, -1, -1, TIFF_BYTE, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "CFAPlaneColor", NULL }, + { TIFFTAG_CFALAYOUT, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "CFALayout", NULL }, + { TIFFTAG_LINEARIZATIONTABLE, -1, -1, TIFF_SHORT, 0, TIFF_SETGET_C16_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "LinearizationTable", NULL }, + { TIFFTAG_BLACKLEVELREPEATDIM, 2, 2, TIFF_SHORT, 0, TIFF_SETGET_C0_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "BlackLevelRepeatDim", NULL }, + { TIFFTAG_BLACKLEVEL, -1, -1, TIFF_RATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "BlackLevel", NULL }, + { TIFFTAG_BLACKLEVELDELTAH, -1, -1, TIFF_SRATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "BlackLevelDeltaH", NULL }, + { TIFFTAG_BLACKLEVELDELTAV, -1, -1, TIFF_SRATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "BlackLevelDeltaV", NULL }, + { TIFFTAG_WHITELEVEL, -1, -1, TIFF_LONG, 0, TIFF_SETGET_C16_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "WhiteLevel", NULL }, + { TIFFTAG_DEFAULTSCALE, 2, 2, TIFF_RATIONAL, 0, TIFF_SETGET_C0_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "DefaultScale", NULL }, + { TIFFTAG_BESTQUALITYSCALE, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "BestQualityScale", NULL }, + { TIFFTAG_DEFAULTCROPORIGIN, 2, 2, TIFF_RATIONAL, 0, TIFF_SETGET_C0_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "DefaultCropOrigin", NULL }, + { TIFFTAG_DEFAULTCROPSIZE, 2, 2, TIFF_RATIONAL, 0, TIFF_SETGET_C0_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "DefaultCropSize", NULL }, + { TIFFTAG_COLORMATRIX1, -1, -1, TIFF_SRATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "ColorMatrix1", NULL }, + { TIFFTAG_COLORMATRIX2, -1, -1, TIFF_SRATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "ColorMatrix2", NULL }, + { TIFFTAG_CAMERACALIBRATION1, -1, -1, TIFF_SRATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "CameraCalibration1", NULL }, + { TIFFTAG_CAMERACALIBRATION2, -1, -1, TIFF_SRATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "CameraCalibration2", NULL }, + { TIFFTAG_REDUCTIONMATRIX1, -1, -1, TIFF_SRATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "ReductionMatrix1", NULL }, + { TIFFTAG_REDUCTIONMATRIX2, -1, -1, TIFF_SRATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "ReductionMatrix2", NULL }, + { TIFFTAG_ANALOGBALANCE, -1, -1, TIFF_RATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "AnalogBalance", NULL }, + { TIFFTAG_ASSHOTNEUTRAL, -1, -1, TIFF_RATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "AsShotNeutral", NULL }, + { TIFFTAG_ASSHOTWHITEXY, 2, 2, TIFF_RATIONAL, 0, TIFF_SETGET_C0_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "AsShotWhiteXY", NULL }, + { TIFFTAG_BASELINEEXPOSURE, 1, 1, TIFF_SRATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "BaselineExposure", NULL }, + { TIFFTAG_BASELINENOISE, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "BaselineNoise", NULL }, + { TIFFTAG_BASELINESHARPNESS, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "BaselineSharpness", NULL }, + { TIFFTAG_BAYERGREENSPLIT, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "BayerGreenSplit", NULL }, + { TIFFTAG_LINEARRESPONSELIMIT, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "LinearResponseLimit", NULL }, + { TIFFTAG_CAMERASERIALNUMBER, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "CameraSerialNumber", NULL }, + { TIFFTAG_LENSINFO, 4, 4, TIFF_RATIONAL, 0, TIFF_SETGET_C0_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "LensInfo", NULL }, + { TIFFTAG_CHROMABLURRADIUS, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "ChromaBlurRadius", NULL }, + { TIFFTAG_ANTIALIASSTRENGTH, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "AntiAliasStrength", NULL }, + { TIFFTAG_SHADOWSCALE, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "ShadowScale", NULL }, + { TIFFTAG_DNGPRIVATEDATA, -1, -1, TIFF_BYTE, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "DNGPrivateData", NULL }, + { TIFFTAG_MAKERNOTESAFETY, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "MakerNoteSafety", NULL }, + { TIFFTAG_CALIBRATIONILLUMINANT1, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "CalibrationIlluminant1", NULL }, + { TIFFTAG_CALIBRATIONILLUMINANT2, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "CalibrationIlluminant2", NULL }, + { TIFFTAG_RAWDATAUNIQUEID, 16, 16, TIFF_BYTE, 0, TIFF_SETGET_C0_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "RawDataUniqueID", NULL }, + { TIFFTAG_ORIGINALRAWFILENAME, -1, -1, TIFF_BYTE, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 1, "OriginalRawFileName", NULL }, + { TIFFTAG_ORIGINALRAWFILEDATA, -1, -1, TIFF_UNDEFINED, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "OriginalRawFileData", NULL }, + { TIFFTAG_ACTIVEAREA, 4, 4, TIFF_LONG, 0, TIFF_SETGET_C0_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "ActiveArea", NULL }, + { TIFFTAG_MASKEDAREAS, -1, -1, TIFF_LONG, 0, TIFF_SETGET_C16_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "MaskedAreas", NULL }, + { TIFFTAG_ASSHOTICCPROFILE, -1, -1, TIFF_UNDEFINED, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "AsShotICCProfile", NULL }, + { TIFFTAG_ASSHOTPREPROFILEMATRIX, -1, -1, TIFF_SRATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "AsShotPreProfileMatrix", NULL }, + { TIFFTAG_CURRENTICCPROFILE, -1, -1, TIFF_UNDEFINED, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "CurrentICCProfile", NULL }, + { TIFFTAG_CURRENTPREPROFILEMATRIX, -1, -1, TIFF_SRATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "CurrentPreProfileMatrix", NULL }, + { TIFFTAG_PERSAMPLE, 0, 0, TIFF_SHORT, 0, TIFF_SETGET_UNDEFINED, TIFF_SETGET_UNDEFINED, FIELD_PSEUDO, TRUE, FALSE, "PerSample", NULL}, + /* end DNG tags */ + /* begin TIFF/FX tags */ + { TIFFTAG_INDEXED, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "Indexed" }, + { TIFFTAG_GLOBALPARAMETERSIFD, 1, 1, TIFF_IFD, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "GlobalParametersIFD", NULL }, + { TIFFTAG_PROFILETYPE, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "ProfileType", NULL }, + { TIFFTAG_FAXPROFILE, 1, 1, TIFF_BYTE, 0, TIFF_SETGET_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "FaxProfile", NULL }, + { TIFFTAG_CODINGMETHODS, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "CodingMethods", NULL }, + { TIFFTAG_VERSIONYEAR, 4, 4, TIFF_BYTE, 0, TIFF_SETGET_C0_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "VersionYear", NULL }, + { TIFFTAG_MODENUMBER, 1, 1, TIFF_BYTE, 0, TIFF_SETGET_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "ModeNumber", NULL }, + { TIFFTAG_DECODE, -1, -1, TIFF_SRATIONAL, 0, TIFF_SETGET_C16_FLOAT, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "Decode", NULL }, + { TIFFTAG_IMAGEBASECOLOR, -1, -1, TIFF_SHORT, 0, TIFF_SETGET_C16_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "ImageBaseColor", NULL }, + { TIFFTAG_T82OPTIONS, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "T82Options", NULL }, + { TIFFTAG_STRIPROWCOUNTS, -1, -1, TIFF_LONG, 0, TIFF_SETGET_C16_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 1, "StripRowCounts", NULL }, + { TIFFTAG_IMAGELAYER, 2, 2, TIFF_LONG, 0, TIFF_SETGET_C0_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 0, 0, "ImageLayer", NULL }, + /* end DNG tags */ + /* begin pseudo tags */ +}; + +static TIFFField +exifFields[] = { + { EXIFTAG_EXPOSURETIME, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ExposureTime", NULL }, + { EXIFTAG_FNUMBER, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "FNumber", NULL }, + { EXIFTAG_EXPOSUREPROGRAM, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ExposureProgram", NULL }, + { EXIFTAG_SPECTRALSENSITIVITY, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "SpectralSensitivity", NULL }, + { EXIFTAG_ISOSPEEDRATINGS, -1, -1, TIFF_SHORT, 0, TIFF_SETGET_C16_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 1, "ISOSpeedRatings", NULL }, + { EXIFTAG_OECF, -1, -1, TIFF_UNDEFINED, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 1, "OptoelectricConversionFactor", NULL }, + { EXIFTAG_EXIFVERSION, 4, 4, TIFF_UNDEFINED, 0, TIFF_SETGET_C0_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ExifVersion", NULL }, + { EXIFTAG_DATETIMEORIGINAL, 20, 20, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "DateTimeOriginal", NULL }, + { EXIFTAG_DATETIMEDIGITIZED, 20, 20, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "DateTimeDigitized", NULL }, + { EXIFTAG_COMPONENTSCONFIGURATION, 4, 4, TIFF_UNDEFINED, 0, TIFF_SETGET_C0_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ComponentsConfiguration", NULL }, + { EXIFTAG_COMPRESSEDBITSPERPIXEL, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "CompressedBitsPerPixel", NULL }, + { EXIFTAG_SHUTTERSPEEDVALUE, 1, 1, TIFF_SRATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ShutterSpeedValue", NULL }, + { EXIFTAG_APERTUREVALUE, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ApertureValue", NULL }, + { EXIFTAG_BRIGHTNESSVALUE, 1, 1, TIFF_SRATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "BrightnessValue", NULL }, + { EXIFTAG_EXPOSUREBIASVALUE, 1, 1, TIFF_SRATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ExposureBiasValue", NULL }, + { EXIFTAG_MAXAPERTUREVALUE, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "MaxApertureValue", NULL }, + { EXIFTAG_SUBJECTDISTANCE, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "SubjectDistance", NULL }, + { EXIFTAG_METERINGMODE, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "MeteringMode", NULL }, + { EXIFTAG_LIGHTSOURCE, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "LightSource", NULL }, + { EXIFTAG_FLASH, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "Flash", NULL }, + { EXIFTAG_FOCALLENGTH, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "FocalLength", NULL }, + { EXIFTAG_SUBJECTAREA, -1, -1, TIFF_SHORT, 0, TIFF_SETGET_C16_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 1, "SubjectArea", NULL }, + { EXIFTAG_MAKERNOTE, -1, -1, TIFF_UNDEFINED, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 1, "MakerNote", NULL }, + { EXIFTAG_USERCOMMENT, -1, -1, TIFF_UNDEFINED, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 1, "UserComment", NULL }, + { EXIFTAG_SUBSECTIME, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "SubSecTime", NULL }, + { EXIFTAG_SUBSECTIMEORIGINAL, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "SubSecTimeOriginal", NULL }, + { EXIFTAG_SUBSECTIMEDIGITIZED, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "SubSecTimeDigitized", NULL }, + { EXIFTAG_FLASHPIXVERSION, 4, 4, TIFF_UNDEFINED, 0, TIFF_SETGET_C0_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "FlashpixVersion", NULL }, + { EXIFTAG_COLORSPACE, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ColorSpace", NULL }, + { EXIFTAG_PIXELXDIMENSION, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "PixelXDimension", NULL }, + { EXIFTAG_PIXELYDIMENSION, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "PixelYDimension", NULL }, + { EXIFTAG_RELATEDSOUNDFILE, 13, 13, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "RelatedSoundFile", NULL }, + { EXIFTAG_FLASHENERGY, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "FlashEnergy", NULL }, + { EXIFTAG_SPATIALFREQUENCYRESPONSE, -1, -1, TIFF_UNDEFINED, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 1, "SpatialFrequencyResponse", NULL }, + { EXIFTAG_FOCALPLANEXRESOLUTION, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "FocalPlaneXResolution", NULL }, + { EXIFTAG_FOCALPLANEYRESOLUTION, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "FocalPlaneYResolution", NULL }, + { EXIFTAG_FOCALPLANERESOLUTIONUNIT, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "FocalPlaneResolutionUnit", NULL }, + { EXIFTAG_SUBJECTLOCATION, 2, 2, TIFF_SHORT, 0, TIFF_SETGET_C0_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "SubjectLocation", NULL }, + { EXIFTAG_EXPOSUREINDEX, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ExposureIndex", NULL }, + { EXIFTAG_SENSINGMETHOD, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "SensingMethod", NULL }, + { EXIFTAG_FILESOURCE, 1, 1, TIFF_UNDEFINED, 0, TIFF_SETGET_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "FileSource", NULL }, + { EXIFTAG_SCENETYPE, 1, 1, TIFF_UNDEFINED, 0, TIFF_SETGET_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "SceneType", NULL }, + { EXIFTAG_CFAPATTERN, -1, -1, TIFF_UNDEFINED, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 1, "CFAPattern", NULL }, + { EXIFTAG_CUSTOMRENDERED, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "CustomRendered", NULL }, + { EXIFTAG_EXPOSUREMODE, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ExposureMode", NULL }, + { EXIFTAG_WHITEBALANCE, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "WhiteBalance", NULL }, + { EXIFTAG_DIGITALZOOMRATIO, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "DigitalZoomRatio", NULL }, + { EXIFTAG_FOCALLENGTHIN35MMFILM, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "FocalLengthIn35mmFilm", NULL }, + { EXIFTAG_SCENECAPTURETYPE, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "SceneCaptureType", NULL }, + { EXIFTAG_GAINCONTROL, 1, 1, TIFF_RATIONAL, 0, TIFF_SETGET_DOUBLE, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "GainControl", NULL }, + { EXIFTAG_CONTRAST, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "Contrast", NULL }, + { EXIFTAG_SATURATION, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "Saturation", NULL }, + { EXIFTAG_SHARPNESS, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "Sharpness", NULL }, + { EXIFTAG_DEVICESETTINGDESCRIPTION, -1, -1, TIFF_UNDEFINED, 0, TIFF_SETGET_C16_UINT8, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 1, "DeviceSettingDescription", NULL }, + { EXIFTAG_SUBJECTDISTANCERANGE, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "SubjectDistanceRange", NULL }, + { EXIFTAG_IMAGEUNIQUEID, 33, 33, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "ImageUniqueID", NULL } +}; + +static TIFFFieldArray +tiffFieldArray = { tfiatImage, 0, TIFFArrayCount(tiffFields), tiffFields }; +static TIFFFieldArray +exifFieldArray = { tfiatExif, 0, TIFFArrayCount(exifFields), exifFields }; + +/* + * We have our own local lfind() equivelent to avoid subtle differences + * in types passed to lfind() on different systems. + */ + +static void * +td_lfind(const void *key, const void *base, size_t *nmemb, size_t size, + int(*compar)(const void *, const void *)) +{ + char *element, *end; + + end = (char *)base + *nmemb * size; + for (element = (char *)base; element < end; element += size) + if (!compar(key, element)) /* key found */ + return element; + + return NULL; +} + +const TIFFFieldArray* +_TIFFGetFields(void) +{ + return(&tiffFieldArray); +} + +const TIFFFieldArray* +_TIFFGetExifFields(void) +{ + return(&exifFieldArray); +} + +void +_TIFFSetupFields(TIFF* tif, const TIFFFieldArray* fieldarray) +{ + if (tif->tif_fields && tif->tif_nfields > 0) { + uint32 i; + + for (i = 0; i < tif->tif_nfields; i++) { + TIFFField *fld = tif->tif_fields[i]; + if (fld->field_bit == FIELD_CUSTOM && + strncmp("Tag ", fld->field_name, 4) == 0) { + _TIFFfree(fld->field_name); + _TIFFfree(fld); + } + } + + _TIFFfree(tif->tif_fields); + tif->tif_fields = NULL; + tif->tif_nfields = 0; + } + if (!_TIFFMergeFields(tif, fieldarray->fields, fieldarray->count)) { + TIFFErrorExt(tif->tif_clientdata, "_TIFFSetupFields", + "Setting up field info failed"); + } +} + +static int +tagCompare(const void* a, const void* b) +{ + const TIFFField* ta = *(const TIFFField**) a; + const TIFFField* tb = *(const TIFFField**) b; + /* NB: be careful of return values for 16-bit platforms */ + if (ta->field_tag != tb->field_tag) + return (int)ta->field_tag - (int)tb->field_tag; + else + return (ta->field_type == TIFF_ANY) ? + 0 : ((int)tb->field_type - (int)ta->field_type); +} + +static int +tagNameCompare(const void* a, const void* b) +{ + const TIFFField* ta = *(const TIFFField**) a; + const TIFFField* tb = *(const TIFFField**) b; + int ret = strcmp(ta->field_name, tb->field_name); + + if (ret) + return ret; + else + return (ta->field_type == TIFF_ANY) ? + 0 : ((int)tb->field_type - (int)ta->field_type); +} + +int +_TIFFMergeFields(TIFF* tif, const TIFFField info[], uint32 n) +{ + static const char module[] = "_TIFFMergeFields"; + static const char reason[] = "for fields array"; + /* TIFFField** tp; */ + uint32 i; + + tif->tif_foundfield = NULL; + + if (tif->tif_fields && tif->tif_nfields > 0) { + tif->tif_fields = (TIFFField**) + _TIFFCheckRealloc(tif, tif->tif_fields, + (tif->tif_nfields + n), + sizeof(TIFFField *), reason); + } else { + tif->tif_fields = (TIFFField **) + _TIFFCheckMalloc(tif, n, sizeof(TIFFField *), + reason); + } + if (!tif->tif_fields) { + TIFFErrorExt(tif->tif_clientdata, module, + "Failed to allocate fields array"); + return 0; + } + + /* tp = tif->tif_fields + tif->tif_nfields; */ + for (i = 0; i < n; i++) { + const TIFFField *fip = + TIFFFindField(tif, info[i].field_tag, TIFF_ANY); + + /* only add definitions that aren't already present */ + if (!fip) { + tif->tif_fields[tif->tif_nfields] = (TIFFField *) (info+i); + tif->tif_nfields++; + } + } + + /* Sort the field info by tag number */ + qsort(tif->tif_fields, tif->tif_nfields, + sizeof(TIFFField *), tagCompare); + + return n; +} + +void +_TIFFPrintFieldInfo(TIFF* tif, FILE* fd) +{ + uint32 i; + + fprintf(fd, "%s: \n", tif->tif_name); + for (i = 0; i < tif->tif_nfields; i++) { + const TIFFField* fip = tif->tif_fields[i]; + fprintf(fd, "field[%2d] %5lu, %2d, %2d, %d, %2d, %5s, %5s, %s\n" + , (int)i + , (unsigned long) fip->field_tag + , fip->field_readcount, fip->field_writecount + , fip->field_type + , fip->field_bit + , fip->field_oktochange ? "TRUE" : "FALSE" + , fip->field_passcount ? "TRUE" : "FALSE" + , fip->field_name + ); + } +} + +/* + * Return size of TIFFDataType in bytes + */ +int +TIFFDataWidth(TIFFDataType type) +{ + switch(type) + { + case 0: /* nothing */ + case TIFF_BYTE: + case TIFF_ASCII: + case TIFF_SBYTE: + case TIFF_UNDEFINED: + return 1; + case TIFF_SHORT: + case TIFF_SSHORT: + return 2; + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_FLOAT: + case TIFF_IFD: + return 4; + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_DOUBLE: + case TIFF_LONG8: + case TIFF_SLONG8: + case TIFF_IFD8: + return 8; + default: + return 0; /* will return 0 for unknown types */ + } +} + +/* + * Return size of TIFFDataType in bytes. + * + * XXX: We need a separate function to determine the space needed + * to store the value. For TIFF_RATIONAL values TIFFDataWidth() returns 8, + * but we use 4-byte float to represent rationals. + */ +int +_TIFFDataSize(TIFFDataType type) +{ + switch (type) + { + case TIFF_BYTE: + case TIFF_SBYTE: + case TIFF_ASCII: + case TIFF_UNDEFINED: + return 1; + case TIFF_SHORT: + case TIFF_SSHORT: + return 2; + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_FLOAT: + case TIFF_IFD: + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + return 4; + case TIFF_DOUBLE: + case TIFF_LONG8: + case TIFF_SLONG8: + case TIFF_IFD8: + return 8; + default: + return 0; + } +} + +const TIFFField* +TIFFFindField(TIFF* tif, uint32 tag, TIFFDataType dt) +{ + TIFFField key = {0, 0, 0, TIFF_NOTYPE, 0, 0, 0, 0, 0, 0, NULL, NULL}; + TIFFField* pkey = &key; + const TIFFField **ret; + if (tif->tif_foundfield && tif->tif_foundfield->field_tag == tag && + (dt == TIFF_ANY || dt == tif->tif_foundfield->field_type)) + return tif->tif_foundfield; + + /* If we are invoked with no field information, then just return. */ + if (!tif->tif_fields) + return NULL; + + /* NB: use sorted search (e.g. binary search) */ + + key.field_tag = tag; + key.field_type = dt; + + ret = (const TIFFField **) bsearch(&pkey, tif->tif_fields, + tif->tif_nfields, + sizeof(TIFFField *), tagCompare); + return tif->tif_foundfield = (ret ? *ret : NULL); +} + +const TIFFField* +_TIFFFindFieldByName(TIFF* tif, const char *field_name, TIFFDataType dt) +{ + TIFFField key = {0, 0, 0, TIFF_NOTYPE, 0, 0, 0, 0, 0, 0, NULL, NULL}; + TIFFField* pkey = &key; + const TIFFField **ret; + if (tif->tif_foundfield + && streq(tif->tif_foundfield->field_name, field_name) + && (dt == TIFF_ANY || dt == tif->tif_foundfield->field_type)) + return (tif->tif_foundfield); + + /* If we are invoked with no field information, then just return. */ + if (!tif->tif_fields) + return NULL; + + /* NB: use linear search since list is sorted by key#, not name */ + + key.field_name = (char *)field_name; + key.field_type = dt; + + ret = (const TIFFField **) + td_lfind(&pkey, tif->tif_fields, &tif->tif_nfields, + sizeof(TIFFField *), tagNameCompare); + + return tif->tif_foundfield = (ret ? *ret : NULL); +} + +const TIFFField* +TIFFFieldWithTag(TIFF* tif, uint32 tag) +{ + const TIFFField* fip = TIFFFindField(tif, tag, TIFF_ANY); + if (!fip) { + TIFFErrorExt(tif->tif_clientdata, "TIFFFieldWithTag", + "Internal error, unknown tag 0x%x", + (unsigned int) tag); + } + return (fip); +} + +const TIFFField* +TIFFFieldWithName(TIFF* tif, const char *field_name) +{ + const TIFFField* fip = + _TIFFFindFieldByName(tif, field_name, TIFF_ANY); + if (!fip) { + TIFFErrorExt(tif->tif_clientdata, "TIFFFieldWithName", + "Internal error, unknown tag %s", field_name); + } + return (fip); +} + +uint32 +TIFFFieldTag(const TIFFField* fip) +{ + return fip->field_tag; +} + +const char * +TIFFFieldName(const TIFFField* fip) +{ + return fip->field_name; +} + +TIFFDataType +TIFFFieldDataType(const TIFFField* fip) +{ + return fip->field_type; +} + +int +TIFFFieldPassCount(const TIFFField* fip) +{ + return fip->field_passcount; +} + +int +TIFFFieldReadCount(const TIFFField* fip) +{ + return fip->field_readcount; +} + +int +TIFFFieldWriteCount(const TIFFField* fip) +{ + return fip->field_writecount; +} + +const TIFFField* +_TIFFFindOrRegisterField(TIFF *tif, uint32 tag, TIFFDataType dt) + +{ + const TIFFField *fld; + + fld = TIFFFindField(tif, tag, dt); + if (fld == NULL) { + fld = _TIFFCreateAnonField(tif, tag, dt); + if (!_TIFFMergeFields(tif, fld, 1)) + return NULL; + } + + return fld; +} + +TIFFField* +_TIFFCreateAnonField(TIFF *tif, uint32 tag, TIFFDataType field_type) +{ + TIFFField *fld; + (void) tif; + + fld = (TIFFField *) _TIFFmalloc(sizeof (TIFFField)); + if (fld == NULL) + return NULL; + _TIFFmemset(fld, 0, sizeof(TIFFField)); + + fld->field_tag = tag; + fld->field_readcount = TIFF_VARIABLE2; + fld->field_writecount = TIFF_VARIABLE2; + fld->field_type = field_type; + fld->reserved = 0; + switch (field_type) + { + case TIFF_BYTE: + case TIFF_UNDEFINED: + fld->set_field_type = TIFF_SETGET_C32_UINT8; + fld->get_field_type = TIFF_SETGET_C32_UINT8; + break; + case TIFF_ASCII: + fld->set_field_type = TIFF_SETGET_C32_ASCII; + fld->get_field_type = TIFF_SETGET_C32_ASCII; + break; + case TIFF_SHORT: + fld->set_field_type = TIFF_SETGET_C32_UINT16; + fld->get_field_type = TIFF_SETGET_C32_UINT16; + break; + case TIFF_LONG: + fld->set_field_type = TIFF_SETGET_C32_UINT32; + fld->get_field_type = TIFF_SETGET_C32_UINT32; + break; + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_FLOAT: + fld->set_field_type = TIFF_SETGET_C32_FLOAT; + fld->get_field_type = TIFF_SETGET_C32_FLOAT; + break; + case TIFF_SBYTE: + fld->set_field_type = TIFF_SETGET_C32_SINT8; + fld->get_field_type = TIFF_SETGET_C32_SINT8; + break; + case TIFF_SSHORT: + fld->set_field_type = TIFF_SETGET_C32_SINT16; + fld->get_field_type = TIFF_SETGET_C32_SINT16; + break; + case TIFF_SLONG: + fld->set_field_type = TIFF_SETGET_C32_SINT32; + fld->get_field_type = TIFF_SETGET_C32_SINT32; + break; + case TIFF_DOUBLE: + fld->set_field_type = TIFF_SETGET_C32_DOUBLE; + fld->get_field_type = TIFF_SETGET_C32_DOUBLE; + break; + case TIFF_IFD: + case TIFF_IFD8: + fld->set_field_type = TIFF_SETGET_C32_IFD8; + fld->get_field_type = TIFF_SETGET_C32_IFD8; + break; + case TIFF_LONG8: + fld->set_field_type = TIFF_SETGET_C32_UINT64; + fld->get_field_type = TIFF_SETGET_C32_UINT64; + break; + case TIFF_SLONG8: + fld->set_field_type = TIFF_SETGET_C32_SINT64; + fld->get_field_type = TIFF_SETGET_C32_SINT64; + break; + default: + fld->set_field_type = TIFF_SETGET_UNDEFINED; + fld->get_field_type = TIFF_SETGET_UNDEFINED; + break; + } + fld->field_bit = FIELD_CUSTOM; + fld->field_oktochange = TRUE; + fld->field_passcount = TRUE; + fld->field_name = (char *) _TIFFmalloc(32); + if (fld->field_name == NULL) { + _TIFFfree(fld); + return NULL; + } + fld->field_subfields = NULL; + + /* + * note that this name is a special sign to TIFFClose() and + * _TIFFSetupFields() to free the field + */ + sprintf(fld->field_name, "Tag %d", (int) tag); + + return fld; +} + +/**************************************************************************** + * O B S O L E T E D I N T E R F A C E S + * + * Don't use this stuff in your applications, it may be removed in the future + * libtiff versions. + ****************************************************************************/ + +static TIFFSetGetFieldType +_TIFFSetGetType(TIFFDataType type, short count, unsigned char passcount) +{ + if (type == TIFF_ASCII && count == TIFF_VARIABLE && passcount == 0) + return TIFF_SETGET_ASCII; + + else if (count == 1 && passcount == 0) { + switch (type) + { + case TIFF_BYTE: + case TIFF_UNDEFINED: + return TIFF_SETGET_UINT8; + case TIFF_ASCII: + return TIFF_SETGET_ASCII; + case TIFF_SHORT: + return TIFF_SETGET_UINT16; + case TIFF_LONG: + return TIFF_SETGET_UINT32; + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_FLOAT: + return TIFF_SETGET_FLOAT; + case TIFF_SBYTE: + return TIFF_SETGET_SINT8; + case TIFF_SSHORT: + return TIFF_SETGET_SINT16; + case TIFF_SLONG: + return TIFF_SETGET_SINT32; + case TIFF_DOUBLE: + return TIFF_SETGET_DOUBLE; + case TIFF_IFD: + case TIFF_IFD8: + return TIFF_SETGET_IFD8; + case TIFF_LONG8: + return TIFF_SETGET_UINT64; + case TIFF_SLONG8: + return TIFF_SETGET_SINT64; + default: + return TIFF_SETGET_UNDEFINED; + } + } + + else if (count >= 1 && passcount == 0) { + switch (type) + { + case TIFF_BYTE: + case TIFF_UNDEFINED: + return TIFF_SETGET_C0_UINT8; + case TIFF_ASCII: + return TIFF_SETGET_C0_ASCII; + case TIFF_SHORT: + return TIFF_SETGET_C0_UINT16; + case TIFF_LONG: + return TIFF_SETGET_C0_UINT32; + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_FLOAT: + return TIFF_SETGET_C0_FLOAT; + case TIFF_SBYTE: + return TIFF_SETGET_C0_SINT8; + case TIFF_SSHORT: + return TIFF_SETGET_C0_SINT16; + case TIFF_SLONG: + return TIFF_SETGET_C0_SINT32; + case TIFF_DOUBLE: + return TIFF_SETGET_C0_DOUBLE; + case TIFF_IFD: + case TIFF_IFD8: + return TIFF_SETGET_C0_IFD8; + case TIFF_LONG8: + return TIFF_SETGET_C0_UINT64; + case TIFF_SLONG8: + return TIFF_SETGET_C0_SINT64; + default: + return TIFF_SETGET_UNDEFINED; + } + } + + else if (count == TIFF_VARIABLE && passcount == 1) { + switch (type) + { + case TIFF_BYTE: + case TIFF_UNDEFINED: + return TIFF_SETGET_C16_UINT8; + case TIFF_ASCII: + return TIFF_SETGET_C16_ASCII; + case TIFF_SHORT: + return TIFF_SETGET_C16_UINT16; + case TIFF_LONG: + return TIFF_SETGET_C16_UINT32; + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_FLOAT: + return TIFF_SETGET_C16_FLOAT; + case TIFF_SBYTE: + return TIFF_SETGET_C16_SINT8; + case TIFF_SSHORT: + return TIFF_SETGET_C16_SINT16; + case TIFF_SLONG: + return TIFF_SETGET_C16_SINT32; + case TIFF_DOUBLE: + return TIFF_SETGET_C16_DOUBLE; + case TIFF_IFD: + case TIFF_IFD8: + return TIFF_SETGET_C16_IFD8; + case TIFF_LONG8: + return TIFF_SETGET_C16_UINT64; + case TIFF_SLONG8: + return TIFF_SETGET_C16_SINT64; + default: + return TIFF_SETGET_UNDEFINED; + } + } + + else if (count == TIFF_VARIABLE2 && passcount == 1) { + switch (type) + { + case TIFF_BYTE: + case TIFF_UNDEFINED: + return TIFF_SETGET_C32_UINT8; + case TIFF_ASCII: + return TIFF_SETGET_C32_ASCII; + case TIFF_SHORT: + return TIFF_SETGET_C32_UINT16; + case TIFF_LONG: + return TIFF_SETGET_C32_UINT32; + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_FLOAT: + return TIFF_SETGET_C32_FLOAT; + case TIFF_SBYTE: + return TIFF_SETGET_C32_SINT8; + case TIFF_SSHORT: + return TIFF_SETGET_C32_SINT16; + case TIFF_SLONG: + return TIFF_SETGET_C32_SINT32; + case TIFF_DOUBLE: + return TIFF_SETGET_C32_DOUBLE; + case TIFF_IFD: + case TIFF_IFD8: + return TIFF_SETGET_C32_IFD8; + case TIFF_LONG8: + return TIFF_SETGET_C32_UINT64; + case TIFF_SLONG8: + return TIFF_SETGET_C32_SINT64; + default: + return TIFF_SETGET_UNDEFINED; + } + } + + return TIFF_SETGET_UNDEFINED; +} + +int +TIFFMergeFieldInfo(TIFF* tif, const TIFFFieldInfo info[], uint32 n) +{ + static const char module[] = "TIFFMergeFieldInfo"; + static const char reason[] = "for fields array"; + TIFFField *tp; + size_t nfields; + uint32 i; + + if (tif->tif_nfieldscompat > 0) { + tif->tif_fieldscompat = (TIFFFieldArray *) + _TIFFCheckRealloc(tif, tif->tif_fieldscompat, + tif->tif_nfieldscompat + 1, + sizeof(TIFFFieldArray), reason); + } else { + tif->tif_fieldscompat = (TIFFFieldArray *) + _TIFFCheckMalloc(tif, 1, sizeof(TIFFFieldArray), + reason); + } + if (!tif->tif_fieldscompat) { + TIFFErrorExt(tif->tif_clientdata, module, + "Failed to allocate fields array"); + return -1; + } + nfields = tif->tif_nfieldscompat++; + + tif->tif_fieldscompat[nfields].type = tfiatOther; + tif->tif_fieldscompat[nfields].allocated_size = n; + tif->tif_fieldscompat[nfields].count = n; + tif->tif_fieldscompat[nfields].fields = + (TIFFField *)_TIFFCheckMalloc(tif, n, sizeof(TIFFField), + reason); + if (!tif->tif_fieldscompat[nfields].fields) { + TIFFErrorExt(tif->tif_clientdata, module, + "Failed to allocate fields array"); + return -1; + } + + tp = tif->tif_fieldscompat[nfields].fields; + for (i = 0; i < n; i++) { + tp->field_tag = info[i].field_tag; + tp->field_readcount = info[i].field_readcount; + tp->field_writecount = info[i].field_writecount; + tp->field_type = info[i].field_type; + tp->reserved = 0; + tp->set_field_type = + _TIFFSetGetType(info[i].field_type, + info[i].field_readcount, + info[i].field_passcount); + tp->get_field_type = + _TIFFSetGetType(info[i].field_type, + info[i].field_readcount, + info[i].field_passcount); + tp->field_bit = info[i].field_bit; + tp->field_oktochange = info[i].field_oktochange; + tp->field_passcount = info[i].field_passcount; + tp->field_name = info[i].field_name; + tp->field_subfields = NULL; + tp++; + } + + if (!_TIFFMergeFields(tif, tif->tif_fieldscompat[nfields].fields, n)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Setting up field info failed"); + return -1; + } + + return 0; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_dirread.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dirread.c new file mode 100644 index 000000000..19a26e278 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dirread.c @@ -0,0 +1,5613 @@ +/* $Id: tif_dirread.c,v 1.178 2012-08-19 16:56:34 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * Directory Read Support Routines. + */ + +/* Suggested pending improvements: + * - add a field 'ignore' to the TIFFDirEntry structure, to flag status, + * eliminating current use of the IGNORE value, and therefore eliminating + * current irrational behaviour on tags with tag id code 0 + * - add a field 'field_info' to the TIFFDirEntry structure, and set that with + * the pointer to the appropriate TIFFField structure early on in + * TIFFReadDirectory, so as to eliminate current possibly repetitive lookup. + */ + +#include "tiffiop.h" + +#define IGNORE 0 /* tag placeholder used below */ +#define FAILED_FII ((uint32) -1) + +#ifdef HAVE_IEEEFP +# define TIFFCvtIEEEFloatToNative(tif, n, fp) +# define TIFFCvtIEEEDoubleToNative(tif, n, dp) +#else +extern void TIFFCvtIEEEFloatToNative(TIFF*, uint32, float*); +extern void TIFFCvtIEEEDoubleToNative(TIFF*, uint32, double*); +#endif + +enum TIFFReadDirEntryErr { + TIFFReadDirEntryErrOk = 0, + TIFFReadDirEntryErrCount = 1, + TIFFReadDirEntryErrType = 2, + TIFFReadDirEntryErrIo = 3, + TIFFReadDirEntryErrRange = 4, + TIFFReadDirEntryErrPsdif = 5, + TIFFReadDirEntryErrSizesan = 6, + TIFFReadDirEntryErrAlloc = 7, +}; + +static enum TIFFReadDirEntryErr TIFFReadDirEntryByte(TIFF* tif, TIFFDirEntry* direntry, uint8* value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryShort(TIFF* tif, TIFFDirEntry* direntry, uint16* value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryLong(TIFF* tif, TIFFDirEntry* direntry, uint32* value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryLong8(TIFF* tif, TIFFDirEntry* direntry, uint64* value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryFloat(TIFF* tif, TIFFDirEntry* direntry, float* value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryDouble(TIFF* tif, TIFFDirEntry* direntry, double* value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryIfd8(TIFF* tif, TIFFDirEntry* direntry, uint64* value); + +static enum TIFFReadDirEntryErr TIFFReadDirEntryArray(TIFF* tif, TIFFDirEntry* direntry, uint32* count, uint32 desttypesize, void** value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryByteArray(TIFF* tif, TIFFDirEntry* direntry, uint8** value); +static enum TIFFReadDirEntryErr TIFFReadDirEntrySbyteArray(TIFF* tif, TIFFDirEntry* direntry, int8** value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryShortArray(TIFF* tif, TIFFDirEntry* direntry, uint16** value); +static enum TIFFReadDirEntryErr TIFFReadDirEntrySshortArray(TIFF* tif, TIFFDirEntry* direntry, int16** value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryLongArray(TIFF* tif, TIFFDirEntry* direntry, uint32** value); +static enum TIFFReadDirEntryErr TIFFReadDirEntrySlongArray(TIFF* tif, TIFFDirEntry* direntry, int32** value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryLong8Array(TIFF* tif, TIFFDirEntry* direntry, uint64** value); +static enum TIFFReadDirEntryErr TIFFReadDirEntrySlong8Array(TIFF* tif, TIFFDirEntry* direntry, int64** value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryFloatArray(TIFF* tif, TIFFDirEntry* direntry, float** value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryDoubleArray(TIFF* tif, TIFFDirEntry* direntry, double** value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryIfd8Array(TIFF* tif, TIFFDirEntry* direntry, uint64** value); + +static enum TIFFReadDirEntryErr TIFFReadDirEntryPersampleShort(TIFF* tif, TIFFDirEntry* direntry, uint16* value); +#if 0 +static enum TIFFReadDirEntryErr TIFFReadDirEntryPersampleDouble(TIFF* tif, TIFFDirEntry* direntry, double* value); +#endif + +static void TIFFReadDirEntryCheckedByte(TIFF* tif, TIFFDirEntry* direntry, uint8* value); +static void TIFFReadDirEntryCheckedSbyte(TIFF* tif, TIFFDirEntry* direntry, int8* value); +static void TIFFReadDirEntryCheckedShort(TIFF* tif, TIFFDirEntry* direntry, uint16* value); +static void TIFFReadDirEntryCheckedSshort(TIFF* tif, TIFFDirEntry* direntry, int16* value); +static void TIFFReadDirEntryCheckedLong(TIFF* tif, TIFFDirEntry* direntry, uint32* value); +static void TIFFReadDirEntryCheckedSlong(TIFF* tif, TIFFDirEntry* direntry, int32* value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckedLong8(TIFF* tif, TIFFDirEntry* direntry, uint64* value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckedSlong8(TIFF* tif, TIFFDirEntry* direntry, int64* value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckedRational(TIFF* tif, TIFFDirEntry* direntry, double* value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckedSrational(TIFF* tif, TIFFDirEntry* direntry, double* value); +static void TIFFReadDirEntryCheckedFloat(TIFF* tif, TIFFDirEntry* direntry, float* value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckedDouble(TIFF* tif, TIFFDirEntry* direntry, double* value); + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteSbyte(int8 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteShort(uint16 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteSshort(int16 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteLong(uint32 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteSlong(int32 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteLong8(uint64 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteSlong8(int64 value); + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteByte(uint8 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteShort(uint16 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteSshort(int16 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteLong(uint32 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteSlong(int32 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteLong8(uint64 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteSlong8(int64 value); + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortSbyte(int8 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortSshort(int16 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortLong(uint32 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortSlong(int32 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortLong8(uint64 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortSlong8(int64 value); + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSshortShort(uint16 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSshortLong(uint32 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSshortSlong(int32 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSshortLong8(uint64 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSshortSlong8(int64 value); + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLongSbyte(int8 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLongSshort(int16 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLongSlong(int32 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLongLong8(uint64 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLongSlong8(int64 value); + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSlongLong(uint32 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSlongLong8(uint64 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSlongSlong8(int64 value); + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLong8Sbyte(int8 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLong8Sshort(int16 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLong8Slong(int32 value); +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLong8Slong8(int64 value); + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSlong8Long8(uint64 value); + +static enum TIFFReadDirEntryErr TIFFReadDirEntryData(TIFF* tif, uint64 offset, tmsize_t size, void* dest); +static void TIFFReadDirEntryOutputErr(TIFF* tif, enum TIFFReadDirEntryErr err, const char* module, const char* tagname, int recover); + +static void TIFFReadDirectoryCheckOrder(TIFF* tif, TIFFDirEntry* dir, uint16 dircount); +static TIFFDirEntry* TIFFReadDirectoryFindEntry(TIFF* tif, TIFFDirEntry* dir, uint16 dircount, uint16 tagid); +static void TIFFReadDirectoryFindFieldInfo(TIFF* tif, uint16 tagid, uint32* fii); + +static int EstimateStripByteCounts(TIFF* tif, TIFFDirEntry* dir, uint16 dircount); +static void MissingRequired(TIFF*, const char*); +static int TIFFCheckDirOffset(TIFF* tif, uint64 diroff); +static int CheckDirCount(TIFF*, TIFFDirEntry*, uint32); +static uint16 TIFFFetchDirectory(TIFF* tif, uint64 diroff, TIFFDirEntry** pdir, uint64* nextdiroff); +static int TIFFFetchNormalTag(TIFF*, TIFFDirEntry*, int recover); +static int TIFFFetchStripThing(TIFF* tif, TIFFDirEntry* dir, uint32 nstrips, uint64** lpp); +static int TIFFFetchSubjectDistance(TIFF*, TIFFDirEntry*); +static void ChopUpSingleUncompressedStrip(TIFF*); +static uint64 TIFFReadUInt64(const uint8 *value); + +typedef union _UInt64Aligned_t +{ + double d; + uint64 l; + uint32 i[2]; + uint16 s[4]; + uint8 c[8]; +} UInt64Aligned_t; + +/* + Unaligned safe copy of a uint64 value from an octet array. +*/ +static uint64 TIFFReadUInt64(const uint8 *value) +{ + UInt64Aligned_t result; + + result.c[0]=value[0]; + result.c[1]=value[1]; + result.c[2]=value[2]; + result.c[3]=value[3]; + result.c[4]=value[4]; + result.c[5]=value[5]; + result.c[6]=value[6]; + result.c[7]=value[7]; + + return result.l; +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryByte(TIFF* tif, TIFFDirEntry* direntry, uint8* value) +{ + enum TIFFReadDirEntryErr err; + if (direntry->tdir_count!=1) + return(TIFFReadDirEntryErrCount); + switch (direntry->tdir_type) + { + case TIFF_BYTE: + TIFFReadDirEntryCheckedByte(tif,direntry,value); + return(TIFFReadDirEntryErrOk); + case TIFF_SBYTE: + { + int8 m; + TIFFReadDirEntryCheckedSbyte(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeByteSbyte(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint8)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SHORT: + { + uint16 m; + TIFFReadDirEntryCheckedShort(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeByteShort(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint8)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SSHORT: + { + int16 m; + TIFFReadDirEntryCheckedSshort(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeByteSshort(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint8)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG: + { + uint32 m; + TIFFReadDirEntryCheckedLong(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeByteLong(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint8)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG: + { + int32 m; + TIFFReadDirEntryCheckedSlong(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeByteSlong(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint8)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG8: + { + uint64 m; + err=TIFFReadDirEntryCheckedLong8(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + err=TIFFReadDirEntryCheckRangeByteLong8(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint8)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG8: + { + int64 m; + err=TIFFReadDirEntryCheckedSlong8(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + err=TIFFReadDirEntryCheckRangeByteSlong8(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint8)m; + return(TIFFReadDirEntryErrOk); + } + default: + return(TIFFReadDirEntryErrType); + } +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryShort(TIFF* tif, TIFFDirEntry* direntry, uint16* value) +{ + enum TIFFReadDirEntryErr err; + if (direntry->tdir_count!=1) + return(TIFFReadDirEntryErrCount); + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8 m; + TIFFReadDirEntryCheckedByte(tif,direntry,&m); + *value=(uint16)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SBYTE: + { + int8 m; + TIFFReadDirEntryCheckedSbyte(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeShortSbyte(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint16)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SHORT: + TIFFReadDirEntryCheckedShort(tif,direntry,value); + return(TIFFReadDirEntryErrOk); + case TIFF_SSHORT: + { + int16 m; + TIFFReadDirEntryCheckedSshort(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeShortSshort(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint16)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG: + { + uint32 m; + TIFFReadDirEntryCheckedLong(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeShortLong(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint16)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG: + { + int32 m; + TIFFReadDirEntryCheckedSlong(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeShortSlong(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint16)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG8: + { + uint64 m; + err=TIFFReadDirEntryCheckedLong8(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + err=TIFFReadDirEntryCheckRangeShortLong8(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint16)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG8: + { + int64 m; + err=TIFFReadDirEntryCheckedSlong8(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + err=TIFFReadDirEntryCheckRangeShortSlong8(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint16)m; + return(TIFFReadDirEntryErrOk); + } + default: + return(TIFFReadDirEntryErrType); + } +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryLong(TIFF* tif, TIFFDirEntry* direntry, uint32* value) +{ + enum TIFFReadDirEntryErr err; + if (direntry->tdir_count!=1) + return(TIFFReadDirEntryErrCount); + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8 m; + TIFFReadDirEntryCheckedByte(tif,direntry,&m); + *value=(uint32)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SBYTE: + { + int8 m; + TIFFReadDirEntryCheckedSbyte(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeLongSbyte(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint32)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SHORT: + { + uint16 m; + TIFFReadDirEntryCheckedShort(tif,direntry,&m); + *value=(uint32)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SSHORT: + { + int16 m; + TIFFReadDirEntryCheckedSshort(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeLongSshort(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint32)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG: + TIFFReadDirEntryCheckedLong(tif,direntry,value); + return(TIFFReadDirEntryErrOk); + case TIFF_SLONG: + { + int32 m; + TIFFReadDirEntryCheckedSlong(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeLongSlong(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint32)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG8: + { + uint64 m; + err=TIFFReadDirEntryCheckedLong8(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + err=TIFFReadDirEntryCheckRangeLongLong8(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint32)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG8: + { + int64 m; + err=TIFFReadDirEntryCheckedSlong8(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + err=TIFFReadDirEntryCheckRangeLongSlong8(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint32)m; + return(TIFFReadDirEntryErrOk); + } + default: + return(TIFFReadDirEntryErrType); + } +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryLong8(TIFF* tif, TIFFDirEntry* direntry, uint64* value) +{ + enum TIFFReadDirEntryErr err; + if (direntry->tdir_count!=1) + return(TIFFReadDirEntryErrCount); + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8 m; + TIFFReadDirEntryCheckedByte(tif,direntry,&m); + *value=(uint64)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SBYTE: + { + int8 m; + TIFFReadDirEntryCheckedSbyte(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeLong8Sbyte(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint64)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SHORT: + { + uint16 m; + TIFFReadDirEntryCheckedShort(tif,direntry,&m); + *value=(uint64)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SSHORT: + { + int16 m; + TIFFReadDirEntryCheckedSshort(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeLong8Sshort(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint64)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG: + { + uint32 m; + TIFFReadDirEntryCheckedLong(tif,direntry,&m); + *value=(uint64)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG: + { + int32 m; + TIFFReadDirEntryCheckedSlong(tif,direntry,&m); + err=TIFFReadDirEntryCheckRangeLong8Slong(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint64)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG8: + err=TIFFReadDirEntryCheckedLong8(tif,direntry,value); + return(err); + case TIFF_SLONG8: + { + int64 m; + err=TIFFReadDirEntryCheckedSlong8(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + err=TIFFReadDirEntryCheckRangeLong8Slong8(m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(uint64)m; + return(TIFFReadDirEntryErrOk); + } + default: + return(TIFFReadDirEntryErrType); + } +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryFloat(TIFF* tif, TIFFDirEntry* direntry, float* value) +{ + enum TIFFReadDirEntryErr err; + if (direntry->tdir_count!=1) + return(TIFFReadDirEntryErrCount); + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8 m; + TIFFReadDirEntryCheckedByte(tif,direntry,&m); + *value=(float)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SBYTE: + { + int8 m; + TIFFReadDirEntryCheckedSbyte(tif,direntry,&m); + *value=(float)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SHORT: + { + uint16 m; + TIFFReadDirEntryCheckedShort(tif,direntry,&m); + *value=(float)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SSHORT: + { + int16 m; + TIFFReadDirEntryCheckedSshort(tif,direntry,&m); + *value=(float)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG: + { + uint32 m; + TIFFReadDirEntryCheckedLong(tif,direntry,&m); + *value=(float)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG: + { + int32 m; + TIFFReadDirEntryCheckedSlong(tif,direntry,&m); + *value=(float)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG8: + { + uint64 m; + err=TIFFReadDirEntryCheckedLong8(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); +#if defined(__WIN32__) && (_MSC_VER < 1500) + /* + * XXX: MSVC 6.0 does not support conversion + * of 64-bit integers into floating point + * values. + */ + *value = _TIFFUInt64ToFloat(m); +#else + *value=(float)m; +#endif + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG8: + { + int64 m; + err=TIFFReadDirEntryCheckedSlong8(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(float)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_RATIONAL: + { + double m; + err=TIFFReadDirEntryCheckedRational(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(float)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SRATIONAL: + { + double m; + err=TIFFReadDirEntryCheckedSrational(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(float)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_FLOAT: + TIFFReadDirEntryCheckedFloat(tif,direntry,value); + return(TIFFReadDirEntryErrOk); + case TIFF_DOUBLE: + { + double m; + err=TIFFReadDirEntryCheckedDouble(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(float)m; + return(TIFFReadDirEntryErrOk); + } + default: + return(TIFFReadDirEntryErrType); + } +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryDouble(TIFF* tif, TIFFDirEntry* direntry, double* value) +{ + enum TIFFReadDirEntryErr err; + if (direntry->tdir_count!=1) + return(TIFFReadDirEntryErrCount); + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8 m; + TIFFReadDirEntryCheckedByte(tif,direntry,&m); + *value=(double)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SBYTE: + { + int8 m; + TIFFReadDirEntryCheckedSbyte(tif,direntry,&m); + *value=(double)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SHORT: + { + uint16 m; + TIFFReadDirEntryCheckedShort(tif,direntry,&m); + *value=(double)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SSHORT: + { + int16 m; + TIFFReadDirEntryCheckedSshort(tif,direntry,&m); + *value=(double)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG: + { + uint32 m; + TIFFReadDirEntryCheckedLong(tif,direntry,&m); + *value=(double)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG: + { + int32 m; + TIFFReadDirEntryCheckedSlong(tif,direntry,&m); + *value=(double)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG8: + { + uint64 m; + err=TIFFReadDirEntryCheckedLong8(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); +#if defined(__WIN32__) && (_MSC_VER < 1500) + /* + * XXX: MSVC 6.0 does not support conversion + * of 64-bit integers into floating point + * values. + */ + *value = _TIFFUInt64ToDouble(m); +#else + *value = (double)m; +#endif + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG8: + { + int64 m; + err=TIFFReadDirEntryCheckedSlong8(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + *value=(double)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_RATIONAL: + err=TIFFReadDirEntryCheckedRational(tif,direntry,value); + return(err); + case TIFF_SRATIONAL: + err=TIFFReadDirEntryCheckedSrational(tif,direntry,value); + return(err); + case TIFF_FLOAT: + { + float m; + TIFFReadDirEntryCheckedFloat(tif,direntry,&m); + *value=(double)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_DOUBLE: + err=TIFFReadDirEntryCheckedDouble(tif,direntry,value); + return(err); + default: + return(TIFFReadDirEntryErrType); + } +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryIfd8(TIFF* tif, TIFFDirEntry* direntry, uint64* value) +{ + enum TIFFReadDirEntryErr err; + if (direntry->tdir_count!=1) + return(TIFFReadDirEntryErrCount); + switch (direntry->tdir_type) + { + case TIFF_LONG: + case TIFF_IFD: + { + uint32 m; + TIFFReadDirEntryCheckedLong(tif,direntry,&m); + *value=(uint64)m; + return(TIFFReadDirEntryErrOk); + } + case TIFF_LONG8: + case TIFF_IFD8: + err=TIFFReadDirEntryCheckedLong8(tif,direntry,value); + return(err); + default: + return(TIFFReadDirEntryErrType); + } +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryArray(TIFF* tif, TIFFDirEntry* direntry, uint32* count, uint32 desttypesize, void** value) +{ + int typesize; + uint32 datasize; + void* data; + typesize=TIFFDataWidth(direntry->tdir_type); + if ((direntry->tdir_count==0)||(typesize==0)) + { + *value=0; + return(TIFFReadDirEntryErrOk); + } + (void) desttypesize; + + /* + * As a sanity check, make sure we have no more than a 2GB tag array + * in either the current data type or the dest data type. This also + * avoids problems with overflow of tmsize_t on 32bit systems. + */ + if ((uint64)(2147483647/typesize)tdir_count) + return(TIFFReadDirEntryErrSizesan); + if ((uint64)(2147483647/desttypesize)tdir_count) + return(TIFFReadDirEntryErrSizesan); + + *count=(uint32)direntry->tdir_count; + datasize=(*count)*typesize; + assert((tmsize_t)datasize>0); + data=_TIFFCheckMalloc(tif, *count, typesize, "ReadDirEntryArray"); + if (data==0) + return(TIFFReadDirEntryErrAlloc); + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + if (datasize<=4) + _TIFFmemcpy(data,&direntry->tdir_offset,datasize); + else + { + enum TIFFReadDirEntryErr err; + uint32 offset = direntry->tdir_offset.toff_long; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&offset); + err=TIFFReadDirEntryData(tif,(uint64)offset,(tmsize_t)datasize,data); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(data); + return(err); + } + } + } + else + { + if (datasize<=8) + _TIFFmemcpy(data,&direntry->tdir_offset,datasize); + else + { + enum TIFFReadDirEntryErr err; + uint64 offset = direntry->tdir_offset.toff_long8; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8(&offset); + err=TIFFReadDirEntryData(tif,offset,(tmsize_t)datasize,data); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(data); + return(err); + } + } + } + *value=data; + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryByteArray(TIFF* tif, TIFFDirEntry* direntry, uint8** value) +{ + enum TIFFReadDirEntryErr err; + uint32 count; + void* origdata; + uint8* data; + switch (direntry->tdir_type) + { + case TIFF_ASCII: + case TIFF_UNDEFINED: + case TIFF_BYTE: + case TIFF_SBYTE: + case TIFF_SHORT: + case TIFF_SSHORT: + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_LONG8: + case TIFF_SLONG8: + break; + default: + return(TIFFReadDirEntryErrType); + } + err=TIFFReadDirEntryArray(tif,direntry,&count,1,&origdata); + if ((err!=TIFFReadDirEntryErrOk)||(origdata==0)) + { + *value=0; + return(err); + } + switch (direntry->tdir_type) + { + case TIFF_ASCII: + case TIFF_UNDEFINED: + case TIFF_BYTE: + *value=(uint8*)origdata; + return(TIFFReadDirEntryErrOk); + case TIFF_SBYTE: + { + int8* m; + uint32 n; + m=(int8*)origdata; + for (n=0; ntdir_type) + { + case TIFF_SHORT: + { + uint16* ma; + uint8* mb; + uint32 n; + ma=(uint16*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort(ma); + err=TIFFReadDirEntryCheckRangeByteShort(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint8)(*ma++); + } + } + break; + case TIFF_SSHORT: + { + int16* ma; + uint8* mb; + uint32 n; + ma=(int16*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)ma); + err=TIFFReadDirEntryCheckRangeByteSshort(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint8)(*ma++); + } + } + break; + case TIFF_LONG: + { + uint32* ma; + uint8* mb; + uint32 n; + ma=(uint32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + err=TIFFReadDirEntryCheckRangeByteLong(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint8)(*ma++); + } + } + break; + case TIFF_SLONG: + { + int32* ma; + uint8* mb; + uint32 n; + ma=(int32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)ma); + err=TIFFReadDirEntryCheckRangeByteSlong(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint8)(*ma++); + } + } + break; + case TIFF_LONG8: + { + uint64* ma; + uint8* mb; + uint32 n; + ma=(uint64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8(ma); + err=TIFFReadDirEntryCheckRangeByteLong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint8)(*ma++); + } + } + break; + case TIFF_SLONG8: + { + int64* ma; + uint8* mb; + uint32 n; + ma=(int64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)ma); + err=TIFFReadDirEntryCheckRangeByteSlong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint8)(*ma++); + } + } + break; + } + _TIFFfree(origdata); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(data); + return(err); + } + *value=data; + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntrySbyteArray(TIFF* tif, TIFFDirEntry* direntry, int8** value) +{ + enum TIFFReadDirEntryErr err; + uint32 count; + void* origdata; + int8* data; + switch (direntry->tdir_type) + { + case TIFF_UNDEFINED: + case TIFF_BYTE: + case TIFF_SBYTE: + case TIFF_SHORT: + case TIFF_SSHORT: + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_LONG8: + case TIFF_SLONG8: + break; + default: + return(TIFFReadDirEntryErrType); + } + err=TIFFReadDirEntryArray(tif,direntry,&count,1,&origdata); + if ((err!=TIFFReadDirEntryErrOk)||(origdata==0)) + { + *value=0; + return(err); + } + switch (direntry->tdir_type) + { + case TIFF_UNDEFINED: + case TIFF_BYTE: + { + uint8* m; + uint32 n; + m=(uint8*)origdata; + for (n=0; ntdir_type) + { + case TIFF_SHORT: + { + uint16* ma; + int8* mb; + uint32 n; + ma=(uint16*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort(ma); + err=TIFFReadDirEntryCheckRangeSbyteShort(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int8)(*ma++); + } + } + break; + case TIFF_SSHORT: + { + int16* ma; + int8* mb; + uint32 n; + ma=(int16*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)ma); + err=TIFFReadDirEntryCheckRangeSbyteSshort(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int8)(*ma++); + } + } + break; + case TIFF_LONG: + { + uint32* ma; + int8* mb; + uint32 n; + ma=(uint32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + err=TIFFReadDirEntryCheckRangeSbyteLong(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int8)(*ma++); + } + } + break; + case TIFF_SLONG: + { + int32* ma; + int8* mb; + uint32 n; + ma=(int32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)ma); + err=TIFFReadDirEntryCheckRangeSbyteSlong(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int8)(*ma++); + } + } + break; + case TIFF_LONG8: + { + uint64* ma; + int8* mb; + uint32 n; + ma=(uint64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8(ma); + err=TIFFReadDirEntryCheckRangeSbyteLong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int8)(*ma++); + } + } + break; + case TIFF_SLONG8: + { + int64* ma; + int8* mb; + uint32 n; + ma=(int64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)ma); + err=TIFFReadDirEntryCheckRangeSbyteSlong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int8)(*ma++); + } + } + break; + } + _TIFFfree(origdata); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(data); + return(err); + } + *value=data; + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryShortArray(TIFF* tif, TIFFDirEntry* direntry, uint16** value) +{ + enum TIFFReadDirEntryErr err; + uint32 count; + void* origdata; + uint16* data; + switch (direntry->tdir_type) + { + case TIFF_BYTE: + case TIFF_SBYTE: + case TIFF_SHORT: + case TIFF_SSHORT: + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_LONG8: + case TIFF_SLONG8: + break; + default: + return(TIFFReadDirEntryErrType); + } + err=TIFFReadDirEntryArray(tif,direntry,&count,2,&origdata); + if ((err!=TIFFReadDirEntryErrOk)||(origdata==0)) + { + *value=0; + return(err); + } + switch (direntry->tdir_type) + { + case TIFF_SHORT: + *value=(uint16*)origdata; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfShort(*value,count); + return(TIFFReadDirEntryErrOk); + case TIFF_SSHORT: + { + int16* m; + uint32 n; + m=(int16*)origdata; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)m); + err=TIFFReadDirEntryCheckRangeShortSshort(*m); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(origdata); + return(err); + } + m++; + } + *value=(uint16*)origdata; + return(TIFFReadDirEntryErrOk); + } + } + data=(uint16*)_TIFFmalloc(count*2); + if (data==0) + { + _TIFFfree(origdata); + return(TIFFReadDirEntryErrAlloc); + } + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8* ma; + uint16* mb; + uint32 n; + ma=(uint8*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + err=TIFFReadDirEntryCheckRangeShortLong(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint16)(*ma++); + } + } + break; + case TIFF_SLONG: + { + int32* ma; + uint16* mb; + uint32 n; + ma=(int32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)ma); + err=TIFFReadDirEntryCheckRangeShortSlong(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint16)(*ma++); + } + } + break; + case TIFF_LONG8: + { + uint64* ma; + uint16* mb; + uint32 n; + ma=(uint64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8(ma); + err=TIFFReadDirEntryCheckRangeShortLong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint16)(*ma++); + } + } + break; + case TIFF_SLONG8: + { + int64* ma; + uint16* mb; + uint32 n; + ma=(int64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)ma); + err=TIFFReadDirEntryCheckRangeShortSlong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint16)(*ma++); + } + } + break; + } + _TIFFfree(origdata); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(data); + return(err); + } + *value=data; + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntrySshortArray(TIFF* tif, TIFFDirEntry* direntry, int16** value) +{ + enum TIFFReadDirEntryErr err; + uint32 count; + void* origdata; + int16* data; + switch (direntry->tdir_type) + { + case TIFF_BYTE: + case TIFF_SBYTE: + case TIFF_SHORT: + case TIFF_SSHORT: + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_LONG8: + case TIFF_SLONG8: + break; + default: + return(TIFFReadDirEntryErrType); + } + err=TIFFReadDirEntryArray(tif,direntry,&count,2,&origdata); + if ((err!=TIFFReadDirEntryErrOk)||(origdata==0)) + { + *value=0; + return(err); + } + switch (direntry->tdir_type) + { + case TIFF_SHORT: + { + uint16* m; + uint32 n; + m=(uint16*)origdata; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort(m); + err=TIFFReadDirEntryCheckRangeSshortShort(*m); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(origdata); + return(err); + } + m++; + } + *value=(int16*)origdata; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SSHORT: + *value=(int16*)origdata; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfShort((uint16*)(*value),count); + return(TIFFReadDirEntryErrOk); + } + data=(int16*)_TIFFmalloc(count*2); + if (data==0) + { + _TIFFfree(origdata); + return(TIFFReadDirEntryErrAlloc); + } + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8* ma; + int16* mb; + uint32 n; + ma=(uint8*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + err=TIFFReadDirEntryCheckRangeSshortLong(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int16)(*ma++); + } + } + break; + case TIFF_SLONG: + { + int32* ma; + int16* mb; + uint32 n; + ma=(int32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)ma); + err=TIFFReadDirEntryCheckRangeSshortSlong(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int16)(*ma++); + } + } + break; + case TIFF_LONG8: + { + uint64* ma; + int16* mb; + uint32 n; + ma=(uint64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8(ma); + err=TIFFReadDirEntryCheckRangeSshortLong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int16)(*ma++); + } + } + break; + case TIFF_SLONG8: + { + int64* ma; + int16* mb; + uint32 n; + ma=(int64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)ma); + err=TIFFReadDirEntryCheckRangeSshortSlong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int16)(*ma++); + } + } + break; + } + _TIFFfree(origdata); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(data); + return(err); + } + *value=data; + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryLongArray(TIFF* tif, TIFFDirEntry* direntry, uint32** value) +{ + enum TIFFReadDirEntryErr err; + uint32 count; + void* origdata; + uint32* data; + switch (direntry->tdir_type) + { + case TIFF_BYTE: + case TIFF_SBYTE: + case TIFF_SHORT: + case TIFF_SSHORT: + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_LONG8: + case TIFF_SLONG8: + break; + default: + return(TIFFReadDirEntryErrType); + } + err=TIFFReadDirEntryArray(tif,direntry,&count,4,&origdata); + if ((err!=TIFFReadDirEntryErrOk)||(origdata==0)) + { + *value=0; + return(err); + } + switch (direntry->tdir_type) + { + case TIFF_LONG: + *value=(uint32*)origdata; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong(*value,count); + return(TIFFReadDirEntryErrOk); + case TIFF_SLONG: + { + int32* m; + uint32 n; + m=(int32*)origdata; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)m); + err=TIFFReadDirEntryCheckRangeLongSlong(*m); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(origdata); + return(err); + } + m++; + } + *value=(uint32*)origdata; + return(TIFFReadDirEntryErrOk); + } + } + data=(uint32*)_TIFFmalloc(count*4); + if (data==0) + { + _TIFFfree(origdata); + return(TIFFReadDirEntryErrAlloc); + } + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8* ma; + uint32* mb; + uint32 n; + ma=(uint8*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort(ma); + *mb++=(uint32)(*ma++); + } + } + break; + case TIFF_SSHORT: + { + int16* ma; + uint32* mb; + uint32 n; + ma=(int16*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)ma); + err=TIFFReadDirEntryCheckRangeLongSshort(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint32)(*ma++); + } + } + break; + case TIFF_LONG8: + { + uint64* ma; + uint32* mb; + uint32 n; + ma=(uint64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8(ma); + err=TIFFReadDirEntryCheckRangeLongLong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint32)(*ma++); + } + } + break; + case TIFF_SLONG8: + { + int64* ma; + uint32* mb; + uint32 n; + ma=(int64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)ma); + err=TIFFReadDirEntryCheckRangeLongSlong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint32)(*ma++); + } + } + break; + } + _TIFFfree(origdata); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(data); + return(err); + } + *value=data; + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntrySlongArray(TIFF* tif, TIFFDirEntry* direntry, int32** value) +{ + enum TIFFReadDirEntryErr err; + uint32 count; + void* origdata; + int32* data; + switch (direntry->tdir_type) + { + case TIFF_BYTE: + case TIFF_SBYTE: + case TIFF_SHORT: + case TIFF_SSHORT: + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_LONG8: + case TIFF_SLONG8: + break; + default: + return(TIFFReadDirEntryErrType); + } + err=TIFFReadDirEntryArray(tif,direntry,&count,4,&origdata); + if ((err!=TIFFReadDirEntryErrOk)||(origdata==0)) + { + *value=0; + return(err); + } + switch (direntry->tdir_type) + { + case TIFF_LONG: + { + uint32* m; + uint32 n; + m=(uint32*)origdata; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)m); + err=TIFFReadDirEntryCheckRangeSlongLong(*m); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(origdata); + return(err); + } + m++; + } + *value=(int32*)origdata; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG: + *value=(int32*)origdata; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong((uint32*)(*value),count); + return(TIFFReadDirEntryErrOk); + } + data=(int32*)_TIFFmalloc(count*4); + if (data==0) + { + _TIFFfree(origdata); + return(TIFFReadDirEntryErrAlloc); + } + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8* ma; + int32* mb; + uint32 n; + ma=(uint8*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort(ma); + *mb++=(int32)(*ma++); + } + } + break; + case TIFF_SSHORT: + { + int16* ma; + int32* mb; + uint32 n; + ma=(int16*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)ma); + *mb++=(int32)(*ma++); + } + } + break; + case TIFF_LONG8: + { + uint64* ma; + int32* mb; + uint32 n; + ma=(uint64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8(ma); + err=TIFFReadDirEntryCheckRangeSlongLong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int32)(*ma++); + } + } + break; + case TIFF_SLONG8: + { + int64* ma; + int32* mb; + uint32 n; + ma=(int64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)ma); + err=TIFFReadDirEntryCheckRangeSlongSlong8(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(int32)(*ma++); + } + } + break; + } + _TIFFfree(origdata); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(data); + return(err); + } + *value=data; + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryLong8Array(TIFF* tif, TIFFDirEntry* direntry, uint64** value) +{ + enum TIFFReadDirEntryErr err; + uint32 count; + void* origdata; + uint64* data; + switch (direntry->tdir_type) + { + case TIFF_BYTE: + case TIFF_SBYTE: + case TIFF_SHORT: + case TIFF_SSHORT: + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_LONG8: + case TIFF_SLONG8: + break; + default: + return(TIFFReadDirEntryErrType); + } + err=TIFFReadDirEntryArray(tif,direntry,&count,8,&origdata); + if ((err!=TIFFReadDirEntryErrOk)||(origdata==0)) + { + *value=0; + return(err); + } + switch (direntry->tdir_type) + { + case TIFF_LONG8: + *value=(uint64*)origdata; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong8(*value,count); + return(TIFFReadDirEntryErrOk); + case TIFF_SLONG8: + { + int64* m; + uint32 n; + m=(int64*)origdata; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)m); + err=TIFFReadDirEntryCheckRangeLong8Slong8(*m); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(origdata); + return(err); + } + m++; + } + *value=(uint64*)origdata; + return(TIFFReadDirEntryErrOk); + } + } + data=(uint64*)_TIFFmalloc(count*8); + if (data==0) + { + _TIFFfree(origdata); + return(TIFFReadDirEntryErrAlloc); + } + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8* ma; + uint64* mb; + uint32 n; + ma=(uint8*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort(ma); + *mb++=(uint64)(*ma++); + } + } + break; + case TIFF_SSHORT: + { + int16* ma; + uint64* mb; + uint32 n; + ma=(int16*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)ma); + err=TIFFReadDirEntryCheckRangeLong8Sshort(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint64)(*ma++); + } + } + break; + case TIFF_LONG: + { + uint32* ma; + uint64* mb; + uint32 n; + ma=(uint32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + *mb++=(uint64)(*ma++); + } + } + break; + case TIFF_SLONG: + { + int32* ma; + uint64* mb; + uint32 n; + ma=(int32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)ma); + err=TIFFReadDirEntryCheckRangeLong8Slong(*ma); + if (err!=TIFFReadDirEntryErrOk) + break; + *mb++=(uint64)(*ma++); + } + } + break; + } + _TIFFfree(origdata); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(data); + return(err); + } + *value=data; + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntrySlong8Array(TIFF* tif, TIFFDirEntry* direntry, int64** value) +{ + enum TIFFReadDirEntryErr err; + uint32 count; + void* origdata; + int64* data; + switch (direntry->tdir_type) + { + case TIFF_BYTE: + case TIFF_SBYTE: + case TIFF_SHORT: + case TIFF_SSHORT: + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_LONG8: + case TIFF_SLONG8: + break; + default: + return(TIFFReadDirEntryErrType); + } + err=TIFFReadDirEntryArray(tif,direntry,&count,8,&origdata); + if ((err!=TIFFReadDirEntryErrOk)||(origdata==0)) + { + *value=0; + return(err); + } + switch (direntry->tdir_type) + { + case TIFF_LONG8: + { + uint64* m; + uint32 n; + m=(uint64*)origdata; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8(m); + err=TIFFReadDirEntryCheckRangeSlong8Long8(*m); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(origdata); + return(err); + } + m++; + } + *value=(int64*)origdata; + return(TIFFReadDirEntryErrOk); + } + case TIFF_SLONG8: + *value=(int64*)origdata; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong8((uint64*)(*value),count); + return(TIFFReadDirEntryErrOk); + } + data=(int64*)_TIFFmalloc(count*8); + if (data==0) + { + _TIFFfree(origdata); + return(TIFFReadDirEntryErrAlloc); + } + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8* ma; + int64* mb; + uint32 n; + ma=(uint8*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort(ma); + *mb++=(int64)(*ma++); + } + } + break; + case TIFF_SSHORT: + { + int16* ma; + int64* mb; + uint32 n; + ma=(int16*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)ma); + *mb++=(int64)(*ma++); + } + } + break; + case TIFF_LONG: + { + uint32* ma; + int64* mb; + uint32 n; + ma=(uint32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + *mb++=(int64)(*ma++); + } + } + break; + case TIFF_SLONG: + { + int32* ma; + int64* mb; + uint32 n; + ma=(int32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)ma); + *mb++=(int64)(*ma++); + } + } + break; + } + _TIFFfree(origdata); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(data); + return(err); + } + *value=data; + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryFloatArray(TIFF* tif, TIFFDirEntry* direntry, float** value) +{ + enum TIFFReadDirEntryErr err; + uint32 count; + void* origdata; + float* data; + switch (direntry->tdir_type) + { + case TIFF_BYTE: + case TIFF_SBYTE: + case TIFF_SHORT: + case TIFF_SSHORT: + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_LONG8: + case TIFF_SLONG8: + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_FLOAT: + case TIFF_DOUBLE: + break; + default: + return(TIFFReadDirEntryErrType); + } + err=TIFFReadDirEntryArray(tif,direntry,&count,4,&origdata); + if ((err!=TIFFReadDirEntryErrOk)||(origdata==0)) + { + *value=0; + return(err); + } + switch (direntry->tdir_type) + { + case TIFF_FLOAT: + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong((uint32*)origdata,count); + TIFFCvtIEEEDoubleToNative(tif,count,(float*)origdata); + *value=(float*)origdata; + return(TIFFReadDirEntryErrOk); + } + data=(float*)_TIFFmalloc(count*sizeof(float)); + if (data==0) + { + _TIFFfree(origdata); + return(TIFFReadDirEntryErrAlloc); + } + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8* ma; + float* mb; + uint32 n; + ma=(uint8*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort(ma); + *mb++=(float)(*ma++); + } + } + break; + case TIFF_SSHORT: + { + int16* ma; + float* mb; + uint32 n; + ma=(int16*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)ma); + *mb++=(float)(*ma++); + } + } + break; + case TIFF_LONG: + { + uint32* ma; + float* mb; + uint32 n; + ma=(uint32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + *mb++=(float)(*ma++); + } + } + break; + case TIFF_SLONG: + { + int32* ma; + float* mb; + uint32 n; + ma=(int32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)ma); + *mb++=(float)(*ma++); + } + } + break; + case TIFF_LONG8: + { + uint64* ma; + float* mb; + uint32 n; + ma=(uint64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8(ma); +#if defined(__WIN32__) && (_MSC_VER < 1500) + /* + * XXX: MSVC 6.0 does not support + * conversion of 64-bit integers into + * floating point values. + */ + *mb++ = _TIFFUInt64ToFloat(*ma++); +#else + *mb++ = (float)(*ma++); +#endif + } + } + break; + case TIFF_SLONG8: + { + int64* ma; + float* mb; + uint32 n; + ma=(int64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)ma); + *mb++=(float)(*ma++); + } + } + break; + case TIFF_RATIONAL: + { + uint32* ma; + uint32 maa; + uint32 mab; + float* mb; + uint32 n; + ma=(uint32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + maa=*ma++; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + mab=*ma++; + if (mab==0) + *mb++=0.0; + else + *mb++=(float)maa/(float)mab; + } + } + break; + case TIFF_SRATIONAL: + { + uint32* ma; + int32 maa; + uint32 mab; + float* mb; + uint32 n; + ma=(uint32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + maa=*(int32*)ma; + ma++; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + mab=*ma++; + if (mab==0) + *mb++=0.0; + else + *mb++=(float)maa/(float)mab; + } + } + break; + case TIFF_DOUBLE: + { + double* ma; + float* mb; + uint32 n; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong8((uint64*)origdata,count); + TIFFCvtIEEEDoubleToNative(tif,count,(double*)origdata); + ma=(double*)origdata; + mb=data; + for (n=0; ntdir_type) + { + case TIFF_BYTE: + case TIFF_SBYTE: + case TIFF_SHORT: + case TIFF_SSHORT: + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_LONG8: + case TIFF_SLONG8: + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_FLOAT: + case TIFF_DOUBLE: + break; + default: + return(TIFFReadDirEntryErrType); + } + err=TIFFReadDirEntryArray(tif,direntry,&count,8,&origdata); + if ((err!=TIFFReadDirEntryErrOk)||(origdata==0)) + { + *value=0; + return(err); + } + switch (direntry->tdir_type) + { + case TIFF_DOUBLE: + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong8((uint64*)origdata,count); + TIFFCvtIEEEDoubleToNative(tif,count,(double*)origdata); + *value=(double*)origdata; + return(TIFFReadDirEntryErrOk); + } + data=(double*)_TIFFmalloc(count*sizeof(double)); + if (data==0) + { + _TIFFfree(origdata); + return(TIFFReadDirEntryErrAlloc); + } + switch (direntry->tdir_type) + { + case TIFF_BYTE: + { + uint8* ma; + double* mb; + uint32 n; + ma=(uint8*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort(ma); + *mb++=(double)(*ma++); + } + } + break; + case TIFF_SSHORT: + { + int16* ma; + double* mb; + uint32 n; + ma=(int16*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)ma); + *mb++=(double)(*ma++); + } + } + break; + case TIFF_LONG: + { + uint32* ma; + double* mb; + uint32 n; + ma=(uint32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + *mb++=(double)(*ma++); + } + } + break; + case TIFF_SLONG: + { + int32* ma; + double* mb; + uint32 n; + ma=(int32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)ma); + *mb++=(double)(*ma++); + } + } + break; + case TIFF_LONG8: + { + uint64* ma; + double* mb; + uint32 n; + ma=(uint64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8(ma); +#if defined(__WIN32__) && (_MSC_VER < 1500) + /* + * XXX: MSVC 6.0 does not support + * conversion of 64-bit integers into + * floating point values. + */ + *mb++ = _TIFFUInt64ToDouble(*ma++); +#else + *mb++ = (double)(*ma++); +#endif + } + } + break; + case TIFF_SLONG8: + { + int64* ma; + double* mb; + uint32 n; + ma=(int64*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)ma); + *mb++=(double)(*ma++); + } + } + break; + case TIFF_RATIONAL: + { + uint32* ma; + uint32 maa; + uint32 mab; + double* mb; + uint32 n; + ma=(uint32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + maa=*ma++; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + mab=*ma++; + if (mab==0) + *mb++=0.0; + else + *mb++=(double)maa/(double)mab; + } + } + break; + case TIFF_SRATIONAL: + { + uint32* ma; + int32 maa; + uint32 mab; + double* mb; + uint32 n; + ma=(uint32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + maa=*(int32*)ma; + ma++; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + mab=*ma++; + if (mab==0) + *mb++=0.0; + else + *mb++=(double)maa/(double)mab; + } + } + break; + case TIFF_FLOAT: + { + float* ma; + double* mb; + uint32 n; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong((uint32*)origdata,count); + TIFFCvtIEEEFloatToNative(tif,count,(float*)origdata); + ma=(float*)origdata; + mb=data; + for (n=0; ntdir_type) + { + case TIFF_LONG: + case TIFF_LONG8: + case TIFF_IFD: + case TIFF_IFD8: + break; + default: + return(TIFFReadDirEntryErrType); + } + err=TIFFReadDirEntryArray(tif,direntry,&count,8,&origdata); + if ((err!=TIFFReadDirEntryErrOk)||(origdata==0)) + { + *value=0; + return(err); + } + switch (direntry->tdir_type) + { + case TIFF_LONG8: + case TIFF_IFD8: + *value=(uint64*)origdata; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong8(*value,count); + return(TIFFReadDirEntryErrOk); + } + data=(uint64*)_TIFFmalloc(count*8); + if (data==0) + { + _TIFFfree(origdata); + return(TIFFReadDirEntryErrAlloc); + } + switch (direntry->tdir_type) + { + case TIFF_LONG: + case TIFF_IFD: + { + uint32* ma; + uint64* mb; + uint32 n; + ma=(uint32*)origdata; + mb=data; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabLong(ma); + *mb++=(uint64)(*ma++); + } + } + break; + } + _TIFFfree(origdata); + if (err!=TIFFReadDirEntryErrOk) + { + _TIFFfree(data); + return(err); + } + *value=data; + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryPersampleShort(TIFF* tif, TIFFDirEntry* direntry, uint16* value) +{ + enum TIFFReadDirEntryErr err; + uint16* m; + uint16* na; + uint16 nb; + if (direntry->tdir_count<(uint64)tif->tif_dir.td_samplesperpixel) + return(TIFFReadDirEntryErrCount); + err=TIFFReadDirEntryShortArray(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + na=m; + nb=tif->tif_dir.td_samplesperpixel; + *value=*na++; + nb--; + while (nb>0) + { + if (*na++!=*value) + { + err=TIFFReadDirEntryErrPsdif; + break; + } + nb--; + } + _TIFFfree(m); + return(err); +} + +#if 0 +static enum TIFFReadDirEntryErr TIFFReadDirEntryPersampleDouble(TIFF* tif, TIFFDirEntry* direntry, double* value) +{ + enum TIFFReadDirEntryErr err; + double* m; + double* na; + uint16 nb; + if (direntry->tdir_count<(uint64)tif->tif_dir.td_samplesperpixel) + return(TIFFReadDirEntryErrCount); + err=TIFFReadDirEntryDoubleArray(tif,direntry,&m); + if (err!=TIFFReadDirEntryErrOk) + return(err); + na=m; + nb=tif->tif_dir.td_samplesperpixel; + *value=*na++; + nb--; + while (nb>0) + { + if (*na++!=*value) + { + err=TIFFReadDirEntryErrPsdif; + break; + } + nb--; + } + _TIFFfree(m); + return(err); +} +#endif + +static void TIFFReadDirEntryCheckedByte(TIFF* tif, TIFFDirEntry* direntry, uint8* value) +{ + (void) tif; + *value=*(uint8*)(&direntry->tdir_offset); +} + +static void TIFFReadDirEntryCheckedSbyte(TIFF* tif, TIFFDirEntry* direntry, int8* value) +{ + (void) tif; + *value=*(int8*)(&direntry->tdir_offset); +} + +static void TIFFReadDirEntryCheckedShort(TIFF* tif, TIFFDirEntry* direntry, uint16* value) +{ + *value = direntry->tdir_offset.toff_short; + /* *value=*(uint16*)(&direntry->tdir_offset); */ + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort(value); +} + +static void TIFFReadDirEntryCheckedSshort(TIFF* tif, TIFFDirEntry* direntry, int16* value) +{ + *value=*(int16*)(&direntry->tdir_offset); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)value); +} + +static void TIFFReadDirEntryCheckedLong(TIFF* tif, TIFFDirEntry* direntry, uint32* value) +{ + *value=*(uint32*)(&direntry->tdir_offset); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(value); +} + +static void TIFFReadDirEntryCheckedSlong(TIFF* tif, TIFFDirEntry* direntry, int32* value) +{ + *value=*(int32*)(&direntry->tdir_offset); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)value); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckedLong8(TIFF* tif, TIFFDirEntry* direntry, uint64* value) +{ + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + enum TIFFReadDirEntryErr err; + uint32 offset = direntry->tdir_offset.toff_long; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&offset); + err=TIFFReadDirEntryData(tif,offset,8,value); + if (err!=TIFFReadDirEntryErrOk) + return(err); + } + else + *value = direntry->tdir_offset.toff_long8; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8(value); + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckedSlong8(TIFF* tif, TIFFDirEntry* direntry, int64* value) +{ + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + enum TIFFReadDirEntryErr err; + uint32 offset = direntry->tdir_offset.toff_long; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&offset); + err=TIFFReadDirEntryData(tif,offset,8,value); + if (err!=TIFFReadDirEntryErrOk) + return(err); + } + else + *value=*(int64*)(&direntry->tdir_offset); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)value); + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckedRational(TIFF* tif, TIFFDirEntry* direntry, double* value) +{ + UInt64Aligned_t m; + + assert(sizeof(double)==8); + assert(sizeof(uint64)==8); + assert(sizeof(uint32)==4); + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + enum TIFFReadDirEntryErr err; + uint32 offset = direntry->tdir_offset.toff_long; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&offset); + err=TIFFReadDirEntryData(tif,offset,8,m.i); + if (err!=TIFFReadDirEntryErrOk) + return(err); + } + else + m.l = direntry->tdir_offset.toff_long8; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong(m.i,2); + if (m.i[0]==0) + *value=0.0; + else + *value=(double)m.i[0]/(double)m.i[1]; + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckedSrational(TIFF* tif, TIFFDirEntry* direntry, double* value) +{ + UInt64Aligned_t m; + assert(sizeof(double)==8); + assert(sizeof(uint64)==8); + assert(sizeof(int32)==4); + assert(sizeof(uint32)==4); + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + enum TIFFReadDirEntryErr err; + uint32 offset = direntry->tdir_offset.toff_long; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&offset); + err=TIFFReadDirEntryData(tif,offset,8,m.i); + if (err!=TIFFReadDirEntryErrOk) + return(err); + } + else + m.l=direntry->tdir_offset.toff_long8; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong(m.i,2); + if ((int32)m.i[0]==0) + *value=0.0; + else + *value=(double)((int32)m.i[0])/(double)m.i[1]; + return(TIFFReadDirEntryErrOk); +} + +static void TIFFReadDirEntryCheckedFloat(TIFF* tif, TIFFDirEntry* direntry, float* value) +{ + union + { + float f; + uint32 i; + } float_union; + assert(sizeof(float)==4); + assert(sizeof(uint32)==4); + assert(sizeof(float_union)==4); + float_union.i=*(uint32*)(&direntry->tdir_offset); + *value=float_union.f; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)value); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckedDouble(TIFF* tif, TIFFDirEntry* direntry, double* value) +{ + assert(sizeof(double)==8); + assert(sizeof(uint64)==8); + assert(sizeof(UInt64Aligned_t)==8); + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + enum TIFFReadDirEntryErr err; + uint32 offset = direntry->tdir_offset.toff_long; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&offset); + err=TIFFReadDirEntryData(tif,offset,8,value); + if (err!=TIFFReadDirEntryErrOk) + return(err); + } + else + { + UInt64Aligned_t uint64_union; + uint64_union.l=direntry->tdir_offset.toff_long8; + *value=uint64_union.d; + } + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)value); + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteSbyte(int8 value) +{ + if (value<0) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteShort(uint16 value) +{ + if (value>0xFF) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteSshort(int16 value) +{ + if ((value<0)||(value>0xFF)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteLong(uint32 value) +{ + if (value>0xFF) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteSlong(int32 value) +{ + if ((value<0)||(value>0xFF)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteLong8(uint64 value) +{ + if (value>0xFF) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeByteSlong8(int64 value) +{ + if ((value<0)||(value>0xFF)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteByte(uint8 value) +{ + if (value>0x7F) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteShort(uint16 value) +{ + if (value>0x7F) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteSshort(int16 value) +{ + if ((value<-0x80)||(value>0x7F)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteLong(uint32 value) +{ + if (value>0x7F) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteSlong(int32 value) +{ + if ((value<-0x80)||(value>0x7F)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteLong8(uint64 value) +{ + if (value>0x7F) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSbyteSlong8(int64 value) +{ + if ((value<-0x80)||(value>0x7F)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortSbyte(int8 value) +{ + if (value<0) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortSshort(int16 value) +{ + if (value<0) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortLong(uint32 value) +{ + if (value>0xFFFF) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortSlong(int32 value) +{ + if ((value<0)||(value>0xFFFF)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortLong8(uint64 value) +{ + if (value>0xFFFF) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeShortSlong8(int64 value) +{ + if ((value<0)||(value>0xFFFF)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSshortShort(uint16 value) +{ + if (value>0x7FFF) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSshortLong(uint32 value) +{ + if (value>0x7FFF) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSshortSlong(int32 value) +{ + if ((value<-0x8000)||(value>0x7FFF)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSshortLong8(uint64 value) +{ + if (value>0x7FFF) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeSshortSlong8(int64 value) +{ + if ((value<-0x8000)||(value>0x7FFF)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLongSbyte(int8 value) +{ + if (value<0) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLongSshort(int16 value) +{ + if (value<0) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr TIFFReadDirEntryCheckRangeLongSlong(int32 value) +{ + if (value<0) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +/* + * Largest 32-bit unsigned integer value. + */ +#if defined(__WIN32__) && defined(_MSC_VER) +# define TIFF_UINT32_MAX 0xFFFFFFFFI64 +#else +# define TIFF_UINT32_MAX 0xFFFFFFFFLL +#endif + +static enum TIFFReadDirEntryErr +TIFFReadDirEntryCheckRangeLongLong8(uint64 value) +{ + if (value > TIFF_UINT32_MAX) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr +TIFFReadDirEntryCheckRangeLongSlong8(int64 value) +{ + if ((value<0) || (value > TIFF_UINT32_MAX)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +#undef TIFF_UINT32_MAX + +static enum TIFFReadDirEntryErr +TIFFReadDirEntryCheckRangeSlongLong(uint32 value) +{ + if (value > 0x7FFFFFFFUL) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr +TIFFReadDirEntryCheckRangeSlongLong8(uint64 value) +{ + if (value > 0x7FFFFFFFUL) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr +TIFFReadDirEntryCheckRangeSlongSlong8(int64 value) +{ + if ((value < 0L-0x80000000L) || (value > 0x7FFFFFFFL)) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr +TIFFReadDirEntryCheckRangeLong8Sbyte(int8 value) +{ + if (value < 0) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr +TIFFReadDirEntryCheckRangeLong8Sshort(int16 value) +{ + if (value < 0) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr +TIFFReadDirEntryCheckRangeLong8Slong(int32 value) +{ + if (value < 0) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +static enum TIFFReadDirEntryErr +TIFFReadDirEntryCheckRangeLong8Slong8(int64 value) +{ + if (value < 0) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +/* + * Largest 64-bit signed integer value. + */ +#if defined(__WIN32__) && defined(_MSC_VER) +# define TIFF_INT64_MAX 0x7FFFFFFFFFFFFFFFI64 +#else +# define TIFF_INT64_MAX 0x7FFFFFFFFFFFFFFFLL +#endif + +static enum TIFFReadDirEntryErr +TIFFReadDirEntryCheckRangeSlong8Long8(uint64 value) +{ + if (value > TIFF_INT64_MAX) + return(TIFFReadDirEntryErrRange); + else + return(TIFFReadDirEntryErrOk); +} + +#undef TIFF_INT64_MAX + +static enum TIFFReadDirEntryErr +TIFFReadDirEntryData(TIFF* tif, uint64 offset, tmsize_t size, void* dest) +{ + assert(size>0); + if (!isMapped(tif)) { + if (!SeekOK(tif,offset)) + return(TIFFReadDirEntryErrIo); + if (!ReadOK(tif,dest,size)) + return(TIFFReadDirEntryErrIo); + } else { + size_t ma,mb; + ma=(size_t)offset; + mb=ma+size; + if (((uint64)ma!=offset) + || (mb < ma) + || (mb - ma != (size_t) size) + || (mb < (size_t)size) + || (mb > (size_t)tif->tif_size) + ) + return(TIFFReadDirEntryErrIo); + _TIFFmemcpy(dest,tif->tif_base+ma,size); + } + return(TIFFReadDirEntryErrOk); +} + +static void TIFFReadDirEntryOutputErr(TIFF* tif, enum TIFFReadDirEntryErr err, const char* module, const char* tagname, int recover) +{ + if (!recover) { + switch (err) { + case TIFFReadDirEntryErrCount: + TIFFErrorExt(tif->tif_clientdata, module, + "Incorrect count for \"%s\"", + tagname); + break; + case TIFFReadDirEntryErrType: + TIFFErrorExt(tif->tif_clientdata, module, + "Incompatible type for \"%s\"", + tagname); + break; + case TIFFReadDirEntryErrIo: + TIFFErrorExt(tif->tif_clientdata, module, + "IO error during reading of \"%s\"", + tagname); + break; + case TIFFReadDirEntryErrRange: + TIFFErrorExt(tif->tif_clientdata, module, + "Incorrect value for \"%s\"", + tagname); + break; + case TIFFReadDirEntryErrPsdif: + TIFFErrorExt(tif->tif_clientdata, module, + "Cannot handle different values per sample for \"%s\"", + tagname); + break; + case TIFFReadDirEntryErrSizesan: + TIFFErrorExt(tif->tif_clientdata, module, + "Sanity check on size of \"%s\" value failed", + tagname); + break; + case TIFFReadDirEntryErrAlloc: + TIFFErrorExt(tif->tif_clientdata, module, + "Out of memory reading of \"%s\"", + tagname); + break; + default: + assert(0); /* we should never get here */ + break; + } + } else { + switch (err) { + case TIFFReadDirEntryErrCount: + TIFFErrorExt(tif->tif_clientdata, module, + "Incorrect count for \"%s\"; tag ignored", + tagname); + break; + case TIFFReadDirEntryErrType: + TIFFWarningExt(tif->tif_clientdata, module, + "Incompatible type for \"%s\"; tag ignored", + tagname); + break; + case TIFFReadDirEntryErrIo: + TIFFWarningExt(tif->tif_clientdata, module, + "IO error during reading of \"%s\"; tag ignored", + tagname); + break; + case TIFFReadDirEntryErrRange: + TIFFWarningExt(tif->tif_clientdata, module, + "Incorrect value for \"%s\"; tag ignored", + tagname); + break; + case TIFFReadDirEntryErrPsdif: + TIFFWarningExt(tif->tif_clientdata, module, + "Cannot handle different values per sample for \"%s\"; tag ignored", + tagname); + break; + case TIFFReadDirEntryErrSizesan: + TIFFWarningExt(tif->tif_clientdata, module, + "Sanity check on size of \"%s\" value failed; tag ignored", + tagname); + break; + case TIFFReadDirEntryErrAlloc: + TIFFWarningExt(tif->tif_clientdata, module, + "Out of memory reading of \"%s\"; tag ignored", + tagname); + break; + default: + assert(0); /* we should never get here */ + break; + } + } +} + +/* + * Read the next TIFF directory from a file and convert it to the internal + * format. We read directories sequentially. + */ +int +TIFFReadDirectory(TIFF* tif) +{ + static const char module[] = "TIFFReadDirectory"; + TIFFDirEntry* dir; + uint16 dircount; + TIFFDirEntry* dp; + uint16 di; + const TIFFField* fip; + uint32 fii=FAILED_FII; + toff_t nextdiroff; + tif->tif_diroff=tif->tif_nextdiroff; + if (!TIFFCheckDirOffset(tif,tif->tif_nextdiroff)) + return 0; /* last offset or bad offset (IFD looping) */ + (*tif->tif_cleanup)(tif); /* cleanup any previous compression state */ + tif->tif_curdir++; + nextdiroff = tif->tif_nextdiroff; + dircount=TIFFFetchDirectory(tif,nextdiroff,&dir,&tif->tif_nextdiroff); + if (!dircount) + { + TIFFErrorExt(tif->tif_clientdata,module, + "Failed to read directory at offset " TIFF_UINT64_FORMAT,nextdiroff); + return 0; + } + TIFFReadDirectoryCheckOrder(tif,dir,dircount); + + /* + * Mark duplicates of any tag to be ignored (bugzilla 1994) + * to avoid certain pathological problems. + */ + { + TIFFDirEntry* ma; + uint16 mb; + for (ma=dir, mb=0; mbtdir_tag==na->tdir_tag) + na->tdir_tag=IGNORE; + } + } + } + + tif->tif_flags &= ~TIFF_BEENWRITING; /* reset before new dir */ + tif->tif_flags &= ~TIFF_BUF4WRITE; /* reset before new dir */ + /* free any old stuff and reinit */ + TIFFFreeDirectory(tif); + TIFFDefaultDirectory(tif); + /* + * Electronic Arts writes gray-scale TIFF files + * without a PlanarConfiguration directory entry. + * Thus we setup a default value here, even though + * the TIFF spec says there is no default value. + */ + TIFFSetField(tif,TIFFTAG_PLANARCONFIG,PLANARCONFIG_CONTIG); + /* + * Setup default value and then make a pass over + * the fields to check type and tag information, + * and to extract info required to size data + * structures. A second pass is made afterwards + * to read in everthing not taken in the first pass. + * But we must process the Compression tag first + * in order to merge in codec-private tag definitions (otherwise + * we may get complaints about unknown tags). However, the + * Compression tag may be dependent on the SamplesPerPixel + * tag value because older TIFF specs permited Compression + * to be written as a SamplesPerPixel-count tag entry. + * Thus if we don't first figure out the correct SamplesPerPixel + * tag value then we may end up ignoring the Compression tag + * value because it has an incorrect count value (if the + * true value of SamplesPerPixel is not 1). + */ + dp=TIFFReadDirectoryFindEntry(tif,dir,dircount,TIFFTAG_SAMPLESPERPIXEL); + if (dp) + { + if (!TIFFFetchNormalTag(tif,dp,0)) + goto bad; + dp->tdir_tag=IGNORE; + } + dp=TIFFReadDirectoryFindEntry(tif,dir,dircount,TIFFTAG_COMPRESSION); + if (dp) + { + /* + * The 5.0 spec says the Compression tag has one value, while + * earlier specs say it has one value per sample. Because of + * this, we accept the tag if one value is supplied with either + * count. + */ + uint16 value; + enum TIFFReadDirEntryErr err; + err=TIFFReadDirEntryShort(tif,dp,&value); + if (err==TIFFReadDirEntryErrCount) + err=TIFFReadDirEntryPersampleShort(tif,dp,&value); + if (err!=TIFFReadDirEntryErrOk) + { + TIFFReadDirEntryOutputErr(tif,err,module,"Compression",0); + goto bad; + } + if (!TIFFSetField(tif,TIFFTAG_COMPRESSION,value)) + goto bad; + dp->tdir_tag=IGNORE; + } + else + { + if (!TIFFSetField(tif,TIFFTAG_COMPRESSION,COMPRESSION_NONE)) + goto bad; + } + /* + * First real pass over the directory. + */ + for (di=0, dp=dir; ditdir_tag!=IGNORE) + { + TIFFReadDirectoryFindFieldInfo(tif,dp->tdir_tag,&fii); + if (fii == FAILED_FII) + { + TIFFWarningExt(tif->tif_clientdata, module, + "Unknown field with tag %d (0x%x) encountered", + dp->tdir_tag,dp->tdir_tag); + /* the following knowingly leaks the + anonymous field structure */ + if (!_TIFFMergeFields(tif, + _TIFFCreateAnonField(tif, + dp->tdir_tag, + (TIFFDataType) dp->tdir_type), + 1)) { + TIFFWarningExt(tif->tif_clientdata, + module, + "Registering anonymous field with tag %d (0x%x) failed", + dp->tdir_tag, + dp->tdir_tag); + dp->tdir_tag=IGNORE; + } else { + TIFFReadDirectoryFindFieldInfo(tif,dp->tdir_tag,&fii); + assert(fii != FAILED_FII); + } + } + } + if (dp->tdir_tag!=IGNORE) + { + fip=tif->tif_fields[fii]; + if (fip->field_bit==FIELD_IGNORE) + dp->tdir_tag=IGNORE; + else + { + switch (dp->tdir_tag) + { + case TIFFTAG_STRIPOFFSETS: + case TIFFTAG_STRIPBYTECOUNTS: + case TIFFTAG_TILEOFFSETS: + case TIFFTAG_TILEBYTECOUNTS: + TIFFSetFieldBit(tif,fip->field_bit); + break; + case TIFFTAG_IMAGEWIDTH: + case TIFFTAG_IMAGELENGTH: + case TIFFTAG_IMAGEDEPTH: + case TIFFTAG_TILELENGTH: + case TIFFTAG_TILEWIDTH: + case TIFFTAG_TILEDEPTH: + case TIFFTAG_PLANARCONFIG: + case TIFFTAG_ROWSPERSTRIP: + case TIFFTAG_EXTRASAMPLES: + if (!TIFFFetchNormalTag(tif,dp,0)) + goto bad; + dp->tdir_tag=IGNORE; + break; + } + } + } + } + /* + * XXX: OJPEG hack. + * If a) compression is OJPEG, b) planarconfig tag says it's separate, + * c) strip offsets/bytecounts tag are both present and + * d) both contain exactly one value, then we consistently find + * that the buggy implementation of the buggy compression scheme + * matches contig planarconfig best. So we 'fix-up' the tag here + */ + if ((tif->tif_dir.td_compression==COMPRESSION_OJPEG)&& + (tif->tif_dir.td_planarconfig==PLANARCONFIG_SEPARATE)) + { + if (!_TIFFFillStriles(tif)) + goto bad; + dp=TIFFReadDirectoryFindEntry(tif,dir,dircount,TIFFTAG_STRIPOFFSETS); + if ((dp!=0)&&(dp->tdir_count==1)) + { + dp=TIFFReadDirectoryFindEntry(tif,dir,dircount, + TIFFTAG_STRIPBYTECOUNTS); + if ((dp!=0)&&(dp->tdir_count==1)) + { + tif->tif_dir.td_planarconfig=PLANARCONFIG_CONTIG; + TIFFWarningExt(tif->tif_clientdata,module, + "Planarconfig tag value assumed incorrect, " + "assuming data is contig instead of chunky"); + } + } + } + /* + * Allocate directory structure and setup defaults. + */ + if (!TIFFFieldSet(tif,FIELD_IMAGEDIMENSIONS)) + { + MissingRequired(tif,"ImageLength"); + goto bad; + } + /* + * Setup appropriate structures (by strip or by tile) + */ + if (!TIFFFieldSet(tif, FIELD_TILEDIMENSIONS)) { + tif->tif_dir.td_nstrips = TIFFNumberOfStrips(tif); + tif->tif_dir.td_tilewidth = tif->tif_dir.td_imagewidth; + tif->tif_dir.td_tilelength = tif->tif_dir.td_rowsperstrip; + tif->tif_dir.td_tiledepth = tif->tif_dir.td_imagedepth; + tif->tif_flags &= ~TIFF_ISTILED; + } else { + tif->tif_dir.td_nstrips = TIFFNumberOfTiles(tif); + tif->tif_flags |= TIFF_ISTILED; + } + if (!tif->tif_dir.td_nstrips) { + TIFFErrorExt(tif->tif_clientdata, module, + "Cannot handle zero number of %s", + isTiled(tif) ? "tiles" : "strips"); + goto bad; + } + tif->tif_dir.td_stripsperimage = tif->tif_dir.td_nstrips; + if (tif->tif_dir.td_planarconfig == PLANARCONFIG_SEPARATE) + tif->tif_dir.td_stripsperimage /= tif->tif_dir.td_samplesperpixel; + if (!TIFFFieldSet(tif, FIELD_STRIPOFFSETS)) { + if ((tif->tif_dir.td_compression==COMPRESSION_OJPEG) && + (isTiled(tif)==0) && + (tif->tif_dir.td_nstrips==1)) { + /* + * XXX: OJPEG hack. + * If a) compression is OJPEG, b) it's not a tiled TIFF, + * and c) the number of strips is 1, + * then we tolerate the absence of stripoffsets tag, + * because, presumably, all required data is in the + * JpegInterchangeFormat stream. + */ + TIFFSetFieldBit(tif, FIELD_STRIPOFFSETS); + } else { + MissingRequired(tif, + isTiled(tif) ? "TileOffsets" : "StripOffsets"); + goto bad; + } + } + /* + * Second pass: extract other information. + */ + for (di=0, dp=dir; ditdir_tag) + { + case IGNORE: + break; + case TIFFTAG_MINSAMPLEVALUE: + case TIFFTAG_MAXSAMPLEVALUE: + case TIFFTAG_BITSPERSAMPLE: + case TIFFTAG_DATATYPE: + case TIFFTAG_SAMPLEFORMAT: + /* + * The MinSampleValue, MaxSampleValue, BitsPerSample + * DataType and SampleFormat tags are supposed to be + * written as one value/sample, but some vendors + * incorrectly write one value only -- so we accept + * that as well (yech). Other vendors write correct + * value for NumberOfSamples, but incorrect one for + * BitsPerSample and friends, and we will read this + * too. + */ + { + uint16 value; + enum TIFFReadDirEntryErr err; + err=TIFFReadDirEntryShort(tif,dp,&value); + if (err==TIFFReadDirEntryErrCount) + err=TIFFReadDirEntryPersampleShort(tif,dp,&value); + if (err!=TIFFReadDirEntryErrOk) + { + fip = TIFFFieldWithTag(tif,dp->tdir_tag); + TIFFReadDirEntryOutputErr(tif,err,module,fip ? fip->field_name : "unknown tagname",0); + goto bad; + } + if (!TIFFSetField(tif,dp->tdir_tag,value)) + goto bad; + } + break; + case TIFFTAG_SMINSAMPLEVALUE: + case TIFFTAG_SMAXSAMPLEVALUE: + { + + double *data; + enum TIFFReadDirEntryErr err; + uint32 saved_flags; + int m; + if (dp->tdir_count != (uint64)tif->tif_dir.td_samplesperpixel) + err = TIFFReadDirEntryErrCount; + else + err = TIFFReadDirEntryDoubleArray(tif, dp, &data); + if (err!=TIFFReadDirEntryErrOk) + { + fip = TIFFFieldWithTag(tif,dp->tdir_tag); + TIFFReadDirEntryOutputErr(tif,err,module,fip ? fip->field_name : "unknown tagname",0); + goto bad; + } + saved_flags = tif->tif_flags; + tif->tif_flags |= TIFF_PERSAMPLE; + m = TIFFSetField(tif,dp->tdir_tag,data); + tif->tif_flags = saved_flags; + _TIFFfree(data); + if (!m) + goto bad; + } + break; + case TIFFTAG_STRIPOFFSETS: + case TIFFTAG_TILEOFFSETS: +#if defined(DEFER_STRILE_LOAD) + _TIFFmemcpy( &(tif->tif_dir.td_stripoffset_entry), + dp, sizeof(TIFFDirEntry) ); +#else + if (!TIFFFetchStripThing(tif,dp,tif->tif_dir.td_nstrips,&tif->tif_dir.td_stripoffset)) + goto bad; +#endif + break; + case TIFFTAG_STRIPBYTECOUNTS: + case TIFFTAG_TILEBYTECOUNTS: +#if defined(DEFER_STRILE_LOAD) + _TIFFmemcpy( &(tif->tif_dir.td_stripbytecount_entry), + dp, sizeof(TIFFDirEntry) ); +#else + if (!TIFFFetchStripThing(tif,dp,tif->tif_dir.td_nstrips,&tif->tif_dir.td_stripbytecount)) + goto bad; +#endif + break; + case TIFFTAG_COLORMAP: + case TIFFTAG_TRANSFERFUNCTION: + { + enum TIFFReadDirEntryErr err; + uint32 countpersample; + uint32 countrequired; + uint32 incrementpersample; + uint16* value=NULL; + countpersample=(1L<tif_dir.td_bitspersample); + if ((dp->tdir_tag==TIFFTAG_TRANSFERFUNCTION)&&(dp->tdir_count==(uint64)countpersample)) + { + countrequired=countpersample; + incrementpersample=0; + } + else + { + countrequired=3*countpersample; + incrementpersample=countpersample; + } + if (dp->tdir_count!=(uint64)countrequired) + err=TIFFReadDirEntryErrCount; + else + err=TIFFReadDirEntryShortArray(tif,dp,&value); + if (err!=TIFFReadDirEntryErrOk) + { + fip = TIFFFieldWithTag(tif,dp->tdir_tag); + TIFFReadDirEntryOutputErr(tif,err,module,fip ? fip->field_name : "unknown tagname",1); + } + else + { + TIFFSetField(tif,dp->tdir_tag,value,value+incrementpersample,value+2*incrementpersample); + _TIFFfree(value); + } + } + break; +/* BEGIN REV 4.0 COMPATIBILITY */ + case TIFFTAG_OSUBFILETYPE: + { + uint16 valueo; + uint32 value; + if (TIFFReadDirEntryShort(tif,dp,&valueo)==TIFFReadDirEntryErrOk) + { + switch (valueo) + { + case OFILETYPE_REDUCEDIMAGE: value=FILETYPE_REDUCEDIMAGE; break; + case OFILETYPE_PAGE: value=FILETYPE_PAGE; break; + default: value=0; break; + } + if (value!=0) + TIFFSetField(tif,TIFFTAG_SUBFILETYPE,value); + } + } + break; +/* END REV 4.0 COMPATIBILITY */ + default: + (void) TIFFFetchNormalTag(tif, dp, TRUE); + break; + } + } + /* + * OJPEG hack: + * - If a) compression is OJPEG, and b) photometric tag is missing, + * then we consistently find that photometric should be YCbCr + * - If a) compression is OJPEG, and b) photometric tag says it's RGB, + * then we consistently find that the buggy implementation of the + * buggy compression scheme matches photometric YCbCr instead. + * - If a) compression is OJPEG, and b) bitspersample tag is missing, + * then we consistently find bitspersample should be 8. + * - If a) compression is OJPEG, b) samplesperpixel tag is missing, + * and c) photometric is RGB or YCbCr, then we consistently find + * samplesperpixel should be 3 + * - If a) compression is OJPEG, b) samplesperpixel tag is missing, + * and c) photometric is MINISWHITE or MINISBLACK, then we consistently + * find samplesperpixel should be 3 + */ + if (tif->tif_dir.td_compression==COMPRESSION_OJPEG) + { + if (!TIFFFieldSet(tif,FIELD_PHOTOMETRIC)) + { + TIFFWarningExt(tif->tif_clientdata, module, + "Photometric tag is missing, assuming data is YCbCr"); + if (!TIFFSetField(tif,TIFFTAG_PHOTOMETRIC,PHOTOMETRIC_YCBCR)) + goto bad; + } + else if (tif->tif_dir.td_photometric==PHOTOMETRIC_RGB) + { + tif->tif_dir.td_photometric=PHOTOMETRIC_YCBCR; + TIFFWarningExt(tif->tif_clientdata, module, + "Photometric tag value assumed incorrect, " + "assuming data is YCbCr instead of RGB"); + } + if (!TIFFFieldSet(tif,FIELD_BITSPERSAMPLE)) + { + TIFFWarningExt(tif->tif_clientdata,module, + "BitsPerSample tag is missing, assuming 8 bits per sample"); + if (!TIFFSetField(tif,TIFFTAG_BITSPERSAMPLE,8)) + goto bad; + } + if (!TIFFFieldSet(tif,FIELD_SAMPLESPERPIXEL)) + { + if (tif->tif_dir.td_photometric==PHOTOMETRIC_RGB) + { + TIFFWarningExt(tif->tif_clientdata,module, + "SamplesPerPixel tag is missing, " + "assuming correct SamplesPerPixel value is 3"); + if (!TIFFSetField(tif,TIFFTAG_SAMPLESPERPIXEL,3)) + goto bad; + } + if (tif->tif_dir.td_photometric==PHOTOMETRIC_YCBCR) + { + TIFFWarningExt(tif->tif_clientdata,module, + "SamplesPerPixel tag is missing, " + "applying correct SamplesPerPixel value of 3"); + if (!TIFFSetField(tif,TIFFTAG_SAMPLESPERPIXEL,3)) + goto bad; + } + else if ((tif->tif_dir.td_photometric==PHOTOMETRIC_MINISWHITE) + || (tif->tif_dir.td_photometric==PHOTOMETRIC_MINISBLACK)) + { + /* + * SamplesPerPixel tag is missing, but is not required + * by spec. Assume correct SamplesPerPixel value of 1. + */ + if (!TIFFSetField(tif,TIFFTAG_SAMPLESPERPIXEL,1)) + goto bad; + } + } + } + /* + * Verify Palette image has a Colormap. + */ + if (tif->tif_dir.td_photometric == PHOTOMETRIC_PALETTE && + !TIFFFieldSet(tif, FIELD_COLORMAP)) { + if ( tif->tif_dir.td_bitspersample>=8 && tif->tif_dir.td_samplesperpixel==3) + tif->tif_dir.td_photometric = PHOTOMETRIC_RGB; + else if (tif->tif_dir.td_bitspersample>=8) + tif->tif_dir.td_photometric = PHOTOMETRIC_MINISBLACK; + else { + MissingRequired(tif, "Colormap"); + goto bad; + } + } + /* + * OJPEG hack: + * We do no further messing with strip/tile offsets/bytecounts in OJPEG + * TIFFs + */ + if (tif->tif_dir.td_compression!=COMPRESSION_OJPEG) + { + /* + * Attempt to deal with a missing StripByteCounts tag. + */ + if (!TIFFFieldSet(tif, FIELD_STRIPBYTECOUNTS)) { + /* + * Some manufacturers violate the spec by not giving + * the size of the strips. In this case, assume there + * is one uncompressed strip of data. + */ + if ((tif->tif_dir.td_planarconfig == PLANARCONFIG_CONTIG && + tif->tif_dir.td_nstrips > 1) || + (tif->tif_dir.td_planarconfig == PLANARCONFIG_SEPARATE && + tif->tif_dir.td_nstrips != (uint32)tif->tif_dir.td_samplesperpixel)) { + MissingRequired(tif, "StripByteCounts"); + goto bad; + } + TIFFWarningExt(tif->tif_clientdata, module, + "TIFF directory is missing required " + "\"StripByteCounts\" field, calculating from imagelength"); + if (EstimateStripByteCounts(tif, dir, dircount) < 0) + goto bad; + /* + * Assume we have wrong StripByteCount value (in case + * of single strip) in following cases: + * - it is equal to zero along with StripOffset; + * - it is larger than file itself (in case of uncompressed + * image); + * - it is smaller than the size of the bytes per row + * multiplied on the number of rows. The last case should + * not be checked in the case of writing new image, + * because we may do not know the exact strip size + * until the whole image will be written and directory + * dumped out. + */ + #define BYTECOUNTLOOKSBAD \ + ( (tif->tif_dir.td_stripbytecount[0] == 0 && tif->tif_dir.td_stripoffset[0] != 0) || \ + (tif->tif_dir.td_compression == COMPRESSION_NONE && \ + tif->tif_dir.td_stripbytecount[0] > TIFFGetFileSize(tif) - tif->tif_dir.td_stripoffset[0]) || \ + (tif->tif_mode == O_RDONLY && \ + tif->tif_dir.td_compression == COMPRESSION_NONE && \ + tif->tif_dir.td_stripbytecount[0] < TIFFScanlineSize64(tif) * tif->tif_dir.td_imagelength) ) + + } else if (tif->tif_dir.td_nstrips == 1 + && _TIFFFillStriles(tif) + && tif->tif_dir.td_stripoffset[0] != 0 + && BYTECOUNTLOOKSBAD) { + /* + * XXX: Plexus (and others) sometimes give a value of + * zero for a tag when they don't know what the + * correct value is! Try and handle the simple case + * of estimating the size of a one strip image. + */ + TIFFWarningExt(tif->tif_clientdata, module, + "Bogus \"StripByteCounts\" field, ignoring and calculating from imagelength"); + if(EstimateStripByteCounts(tif, dir, dircount) < 0) + goto bad; + +#if !defined(DEFER_STRILE_LOAD) + } else if (tif->tif_dir.td_planarconfig == PLANARCONFIG_CONTIG + && tif->tif_dir.td_nstrips > 2 + && tif->tif_dir.td_compression == COMPRESSION_NONE + && tif->tif_dir.td_stripbytecount[0] != tif->tif_dir.td_stripbytecount[1] + && tif->tif_dir.td_stripbytecount[0] != 0 + && tif->tif_dir.td_stripbytecount[1] != 0 ) { + /* + * XXX: Some vendors fill StripByteCount array with + * absolutely wrong values (it can be equal to + * StripOffset array, for example). Catch this case + * here. + * + * We avoid this check if deferring strile loading + * as it would always force us to load the strip/tile + * information. + */ + TIFFWarningExt(tif->tif_clientdata, module, + "Wrong \"StripByteCounts\" field, ignoring and calculating from imagelength"); + if (EstimateStripByteCounts(tif, dir, dircount) < 0) + goto bad; +#endif /* !defined(DEFER_STRILE_LOAD) */ + } + } + if (dir) + { + _TIFFfree(dir); + dir=NULL; + } + if (!TIFFFieldSet(tif, FIELD_MAXSAMPLEVALUE)) + { + if (tif->tif_dir.td_bitspersample>=16) + tif->tif_dir.td_maxsamplevalue=0xFFFF; + else + tif->tif_dir.td_maxsamplevalue = (uint16)((1L<tif_dir.td_bitspersample)-1); + } + /* + * XXX: We can optimize checking for the strip bounds using the sorted + * bytecounts array. See also comments for TIFFAppendToStrip() + * function in tif_write.c. + */ +#if !defined(DEFER_STRILE_LOAD) + if (tif->tif_dir.td_nstrips > 1) { + uint32 strip; + + tif->tif_dir.td_stripbytecountsorted = 1; + for (strip = 1; strip < tif->tif_dir.td_nstrips; strip++) { + if (tif->tif_dir.td_stripoffset[strip - 1] > + tif->tif_dir.td_stripoffset[strip]) { + tif->tif_dir.td_stripbytecountsorted = 0; + break; + } + } + } +#endif /* !defined(DEFER_STRILE_LOAD) */ + + /* + * An opportunity for compression mode dependent tag fixup + */ + (*tif->tif_fixuptags)(tif); + + /* + * Some manufacturers make life difficult by writing + * large amounts of uncompressed data as a single strip. + * This is contrary to the recommendations of the spec. + * The following makes an attempt at breaking such images + * into strips closer to the recommended 8k bytes. A + * side effect, however, is that the RowsPerStrip tag + * value may be changed. + */ + if ((tif->tif_dir.td_planarconfig==PLANARCONFIG_CONTIG)&& + (tif->tif_dir.td_nstrips==1)&& + (tif->tif_dir.td_compression==COMPRESSION_NONE)&& + ((tif->tif_flags&(TIFF_STRIPCHOP|TIFF_ISTILED))==TIFF_STRIPCHOP)) + { + if ( !_TIFFFillStriles(tif) || !tif->tif_dir.td_stripbytecount ) + return 0; + ChopUpSingleUncompressedStrip(tif); + } + + /* + * Clear the dirty directory flag. + */ + tif->tif_flags &= ~TIFF_DIRTYDIRECT; + tif->tif_flags &= ~TIFF_DIRTYSTRIP; + + /* + * Reinitialize i/o since we are starting on a new directory. + */ + tif->tif_row = (uint32) -1; + tif->tif_curstrip = (uint32) -1; + tif->tif_col = (uint32) -1; + tif->tif_curtile = (uint32) -1; + tif->tif_tilesize = (tmsize_t) -1; + + tif->tif_scanlinesize = TIFFScanlineSize(tif); + if (!tif->tif_scanlinesize) { + TIFFErrorExt(tif->tif_clientdata, module, + "Cannot handle zero scanline size"); + return (0); + } + + if (isTiled(tif)) { + tif->tif_tilesize = TIFFTileSize(tif); + if (!tif->tif_tilesize) { + TIFFErrorExt(tif->tif_clientdata, module, + "Cannot handle zero tile size"); + return (0); + } + } else { + if (!TIFFStripSize(tif)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Cannot handle zero strip size"); + return (0); + } + } + return (1); +bad: + if (dir) + _TIFFfree(dir); + return (0); +} + +static void +TIFFReadDirectoryCheckOrder(TIFF* tif, TIFFDirEntry* dir, uint16 dircount) +{ + static const char module[] = "TIFFReadDirectoryCheckOrder"; + uint16 m; + uint16 n; + TIFFDirEntry* o; + m=0; + for (n=0, o=dir; ntdir_tagtif_clientdata,module, + "Invalid TIFF directory; tags are not sorted in ascending order"); + break; + } + m=o->tdir_tag+1; + } +} + +static TIFFDirEntry* +TIFFReadDirectoryFindEntry(TIFF* tif, TIFFDirEntry* dir, uint16 dircount, uint16 tagid) +{ + TIFFDirEntry* m; + uint16 n; + (void) tif; + for (m=dir, n=0; ntdir_tag==tagid) + return(m); + } + return(0); +} + +static void +TIFFReadDirectoryFindFieldInfo(TIFF* tif, uint16 tagid, uint32* fii) +{ + int32 ma,mb,mc; + ma=-1; + mc=(int32)tif->tif_nfields; + while (1) + { + if (ma+1==mc) + { + *fii = FAILED_FII; + return; + } + mb=(ma+mc)/2; + if (tif->tif_fields[mb]->field_tag==(uint32)tagid) + break; + if (tif->tif_fields[mb]->field_tag<(uint32)tagid) + ma=mb; + else + mc=mb; + } + while (1) + { + if (mb==0) + break; + if (tif->tif_fields[mb-1]->field_tag!=(uint32)tagid) + break; + mb--; + } + *fii=mb; +} + +/* + * Read custom directory from the arbitarry offset. + * The code is very similar to TIFFReadDirectory(). + */ +int +TIFFReadCustomDirectory(TIFF* tif, toff_t diroff, + const TIFFFieldArray* infoarray) +{ + static const char module[] = "TIFFReadCustomDirectory"; + TIFFDirEntry* dir; + uint16 dircount; + TIFFDirEntry* dp; + uint16 di; + const TIFFField* fip; + uint32 fii; + _TIFFSetupFields(tif, infoarray); + dircount=TIFFFetchDirectory(tif,diroff,&dir,NULL); + if (!dircount) + { + TIFFErrorExt(tif->tif_clientdata,module, + "Failed to read custom directory at offset " TIFF_UINT64_FORMAT,diroff); + return 0; + } + TIFFFreeDirectory(tif); + _TIFFmemset(&tif->tif_dir, 0, sizeof(TIFFDirectory)); + TIFFReadDirectoryCheckOrder(tif,dir,dircount); + for (di=0, dp=dir; ditdir_tag,&fii); + if (fii == FAILED_FII) + { + TIFFWarningExt(tif->tif_clientdata, module, + "Unknown field with tag %d (0x%x) encountered", + dp->tdir_tag, dp->tdir_tag); + if (!_TIFFMergeFields(tif, _TIFFCreateAnonField(tif, + dp->tdir_tag, + (TIFFDataType) dp->tdir_type), + 1)) { + TIFFWarningExt(tif->tif_clientdata, module, + "Registering anonymous field with tag %d (0x%x) failed", + dp->tdir_tag, dp->tdir_tag); + dp->tdir_tag=IGNORE; + } else { + TIFFReadDirectoryFindFieldInfo(tif,dp->tdir_tag,&fii); + assert( fii != FAILED_FII ); + } + } + if (dp->tdir_tag!=IGNORE) + { + fip=tif->tif_fields[fii]; + if (fip->field_bit==FIELD_IGNORE) + dp->tdir_tag=IGNORE; + else + { + /* check data type */ + while ((fip->field_type!=TIFF_ANY)&&(fip->field_type!=dp->tdir_type)) + { + fii++; + if ((fii==tif->tif_nfields)|| + (tif->tif_fields[fii]->field_tag!=(uint32)dp->tdir_tag)) + { + fii=0xFFFF; + break; + } + fip=tif->tif_fields[fii]; + } + if (fii==0xFFFF) + { + TIFFWarningExt(tif->tif_clientdata, module, + "Wrong data type %d for \"%s\"; tag ignored", + dp->tdir_type,fip->field_name); + dp->tdir_tag=IGNORE; + } + else + { + /* check count if known in advance */ + if ((fip->field_readcount!=TIFF_VARIABLE)&& + (fip->field_readcount!=TIFF_VARIABLE2)) + { + uint32 expected; + if (fip->field_readcount==TIFF_SPP) + expected=(uint32)tif->tif_dir.td_samplesperpixel; + else + expected=(uint32)fip->field_readcount; + if (!CheckDirCount(tif,dp,expected)) + dp->tdir_tag=IGNORE; + } + } + } + switch (dp->tdir_tag) + { + case IGNORE: + break; + case EXIFTAG_SUBJECTDISTANCE: + (void) TIFFFetchSubjectDistance(tif,dp); + break; + default: + (void) TIFFFetchNormalTag(tif, dp, TRUE); + break; + } + } + } + if (dir) + _TIFFfree(dir); + return 1; +} + +/* + * EXIF is important special case of custom IFD, so we have a special + * function to read it. + */ +int +TIFFReadEXIFDirectory(TIFF* tif, toff_t diroff) +{ + const TIFFFieldArray* exifFieldArray; + exifFieldArray = _TIFFGetExifFields(); + return TIFFReadCustomDirectory(tif, diroff, exifFieldArray); +} + +static int +EstimateStripByteCounts(TIFF* tif, TIFFDirEntry* dir, uint16 dircount) +{ + static const char module[] = "EstimateStripByteCounts"; + + TIFFDirEntry *dp; + TIFFDirectory *td = &tif->tif_dir; + uint32 strip; + + _TIFFFillStriles( tif ); + + if (td->td_stripbytecount) + _TIFFfree(td->td_stripbytecount); + td->td_stripbytecount = (uint64*) + _TIFFCheckMalloc(tif, td->td_nstrips, sizeof (uint64), + "for \"StripByteCounts\" array"); + if( td->td_stripbytecount == NULL ) + return -1; + + if (td->td_compression != COMPRESSION_NONE) { + uint64 space; + uint64 filesize; + uint16 n; + filesize = TIFFGetFileSize(tif); + if (!(tif->tif_flags&TIFF_BIGTIFF)) + space=sizeof(TIFFHeaderClassic)+2+dircount*12+4; + else + space=sizeof(TIFFHeaderBig)+8+dircount*20+8; + /* calculate amount of space used by indirect values */ + for (dp = dir, n = dircount; n > 0; n--, dp++) + { + uint32 typewidth = TIFFDataWidth((TIFFDataType) dp->tdir_type); + uint64 datasize; + typewidth = TIFFDataWidth((TIFFDataType) dp->tdir_type); + if (typewidth == 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "Cannot determine size of unknown tag type %d", + dp->tdir_type); + return -1; + } + datasize=(uint64)typewidth*dp->tdir_count; + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + if (datasize<=4) + datasize=0; + } + else + { + if (datasize<=8) + datasize=0; + } + space+=datasize; + } + space = filesize - space; + if (td->td_planarconfig == PLANARCONFIG_SEPARATE) + space /= td->td_samplesperpixel; + for (strip = 0; strip < td->td_nstrips; strip++) + td->td_stripbytecount[strip] = space; + /* + * This gross hack handles the case were the offset to + * the last strip is past the place where we think the strip + * should begin. Since a strip of data must be contiguous, + * it's safe to assume that we've overestimated the amount + * of data in the strip and trim this number back accordingly. + */ + strip--; + if (td->td_stripoffset[strip]+td->td_stripbytecount[strip] > filesize) + td->td_stripbytecount[strip] = filesize - td->td_stripoffset[strip]; + } else if (isTiled(tif)) { + uint64 bytespertile = TIFFTileSize64(tif); + + for (strip = 0; strip < td->td_nstrips; strip++) + td->td_stripbytecount[strip] = bytespertile; + } else { + uint64 rowbytes = TIFFScanlineSize64(tif); + uint32 rowsperstrip = td->td_imagelength/td->td_stripsperimage; + for (strip = 0; strip < td->td_nstrips; strip++) + td->td_stripbytecount[strip] = rowbytes * rowsperstrip; + } + TIFFSetFieldBit(tif, FIELD_STRIPBYTECOUNTS); + if (!TIFFFieldSet(tif, FIELD_ROWSPERSTRIP)) + td->td_rowsperstrip = td->td_imagelength; + return 1; +} + +static void +MissingRequired(TIFF* tif, const char* tagname) +{ + static const char module[] = "MissingRequired"; + + TIFFErrorExt(tif->tif_clientdata, module, + "TIFF directory is missing required \"%s\" field", + tagname); +} + +/* + * Check the directory offset against the list of already seen directory + * offsets. This is a trick to prevent IFD looping. The one can create TIFF + * file with looped directory pointers. We will maintain a list of already + * seen directories and check every IFD offset against that list. + */ +static int +TIFFCheckDirOffset(TIFF* tif, uint64 diroff) +{ + uint16 n; + + if (diroff == 0) /* no more directories */ + return 0; + + for (n = 0; n < tif->tif_dirnumber && tif->tif_dirlist; n++) { + if (tif->tif_dirlist[n] == diroff) + return 0; + } + + tif->tif_dirnumber++; + + if (tif->tif_dirnumber > tif->tif_dirlistsize) { + uint64* new_dirlist; + + /* + * XXX: Reduce memory allocation granularity of the dirlist + * array. + */ + new_dirlist = (uint64*)_TIFFCheckRealloc(tif, tif->tif_dirlist, + tif->tif_dirnumber, 2 * sizeof(uint64), "for IFD list"); + if (!new_dirlist) + return 0; + tif->tif_dirlistsize = 2 * tif->tif_dirnumber; + tif->tif_dirlist = new_dirlist; + } + + tif->tif_dirlist[tif->tif_dirnumber - 1] = diroff; + + return 1; +} + +/* + * Check the count field of a directory entry against a known value. The + * caller is expected to skip/ignore the tag if there is a mismatch. + */ +static int +CheckDirCount(TIFF* tif, TIFFDirEntry* dir, uint32 count) +{ + if ((uint64)count > dir->tdir_count) { + const TIFFField* fip = TIFFFieldWithTag(tif, dir->tdir_tag); + TIFFWarningExt(tif->tif_clientdata, tif->tif_name, + "incorrect count for field \"%s\" (" TIFF_UINT64_FORMAT ", expecting %u); tag ignored", + fip ? fip->field_name : "unknown tagname", + dir->tdir_count, count); + return (0); + } else if ((uint64)count < dir->tdir_count) { + const TIFFField* fip = TIFFFieldWithTag(tif, dir->tdir_tag); + TIFFWarningExt(tif->tif_clientdata, tif->tif_name, + "incorrect count for field \"%s\" (" TIFF_UINT64_FORMAT ", expecting %u); tag trimmed", + fip ? fip->field_name : "unknown tagname", + dir->tdir_count, count); + dir->tdir_count = count; + return (1); + } + return (1); +} + +/* + * Read IFD structure from the specified offset. If the pointer to + * nextdiroff variable has been specified, read it too. Function returns a + * number of fields in the directory or 0 if failed. + */ +static uint16 +TIFFFetchDirectory(TIFF* tif, uint64 diroff, TIFFDirEntry** pdir, + uint64 *nextdiroff) +{ + static const char module[] = "TIFFFetchDirectory"; + + void* origdir; + uint16 dircount16; + uint32 dirsize; + TIFFDirEntry* dir; + uint8* ma; + TIFFDirEntry* mb; + uint16 n; + + assert(pdir); + + tif->tif_diroff = diroff; + if (nextdiroff) + *nextdiroff = 0; + if (!isMapped(tif)) { + if (!SeekOK(tif, tif->tif_diroff)) { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Seek error accessing TIFF directory", + tif->tif_name); + return 0; + } + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + if (!ReadOK(tif, &dircount16, sizeof (uint16))) { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Can not read TIFF directory count", + tif->tif_name); + return 0; + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabShort(&dircount16); + if (dircount16>4096) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Sanity check on directory count failed, this is probably not a valid IFD offset"); + return 0; + } + dirsize = 12; + } else { + uint64 dircount64; + if (!ReadOK(tif, &dircount64, sizeof (uint64))) { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Can not read TIFF directory count", + tif->tif_name); + return 0; + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(&dircount64); + if (dircount64>4096) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Sanity check on directory count failed, this is probably not a valid IFD offset"); + return 0; + } + dircount16 = (uint16)dircount64; + dirsize = 20; + } + origdir = _TIFFCheckMalloc(tif, dircount16, + dirsize, "to read TIFF directory"); + if (origdir == NULL) + return 0; + if (!ReadOK(tif, origdir, (tmsize_t)(dircount16*dirsize))) { + TIFFErrorExt(tif->tif_clientdata, module, + "%.100s: Can not read TIFF directory", + tif->tif_name); + _TIFFfree(origdir); + return 0; + } + /* + * Read offset to next directory for sequential scans if + * needed. + */ + if (nextdiroff) + { + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint32 nextdiroff32; + if (!ReadOK(tif, &nextdiroff32, sizeof(uint32))) + nextdiroff32 = 0; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&nextdiroff32); + *nextdiroff=nextdiroff32; + } else { + if (!ReadOK(tif, nextdiroff, sizeof(uint64))) + *nextdiroff = 0; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8(nextdiroff); + } + } + } else { + tmsize_t m; + tmsize_t off = (tmsize_t) tif->tif_diroff; + if ((uint64)off!=tif->tif_diroff) + { + TIFFErrorExt(tif->tif_clientdata,module,"Can not read TIFF directory count"); + return(0); + } + + /* + * Check for integer overflow when validating the dir_off, + * otherwise a very high offset may cause an OOB read and + * crash the client. Make two comparisons instead of + * + * off + sizeof(uint16) > tif->tif_size + * + * to avoid overflow. + */ + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + m=off+sizeof(uint16); + if ((mtif->tif_size)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Can not read TIFF directory count"); + return 0; + } else { + _TIFFmemcpy(&dircount16, tif->tif_base + off, + sizeof(uint16)); + } + off += sizeof (uint16); + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabShort(&dircount16); + if (dircount16>4096) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Sanity check on directory count failed, this is probably not a valid IFD offset"); + return 0; + } + dirsize = 12; + } + else + { + tmsize_t m; + uint64 dircount64; + m=off+sizeof(uint64); + if ((mtif->tif_size)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Can not read TIFF directory count"); + return 0; + } else { + _TIFFmemcpy(&dircount64, tif->tif_base + off, + sizeof(uint64)); + } + off += sizeof (uint64); + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(&dircount64); + if (dircount64>4096) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Sanity check on directory count failed, this is probably not a valid IFD offset"); + return 0; + } + dircount16 = (uint16)dircount64; + dirsize = 20; + } + if (dircount16 == 0 ) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Sanity check on directory count failed, zero tag directories not supported"); + return 0; + } + origdir = _TIFFCheckMalloc(tif, dircount16, + dirsize, + "to read TIFF directory"); + if (origdir == NULL) + return 0; + m=off+dircount16*dirsize; + if ((mtif->tif_size)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Can not read TIFF directory"); + _TIFFfree(origdir); + return 0; + } else { + _TIFFmemcpy(origdir, tif->tif_base + off, + dircount16 * dirsize); + } + if (nextdiroff) { + off += dircount16 * dirsize; + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint32 nextdiroff32; + m=off+sizeof(uint32); + if ((mtif->tif_size)) + nextdiroff32 = 0; + else + _TIFFmemcpy(&nextdiroff32, tif->tif_base + off, + sizeof (uint32)); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&nextdiroff32); + *nextdiroff = nextdiroff32; + } + else + { + m=off+sizeof(uint64); + if ((mtif->tif_size)) + *nextdiroff = 0; + else + _TIFFmemcpy(nextdiroff, tif->tif_base + off, + sizeof (uint64)); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8(nextdiroff); + } + } + } + dir = (TIFFDirEntry*)_TIFFCheckMalloc(tif, dircount16, + sizeof(TIFFDirEntry), + "to read TIFF directory"); + if (dir==0) + { + _TIFFfree(origdir); + return 0; + } + ma=(uint8*)origdir; + mb=dir; + for (n=0; ntif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)ma); + mb->tdir_tag=*(uint16*)ma; + ma+=sizeof(uint16); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)ma); + mb->tdir_type=*(uint16*)ma; + ma+=sizeof(uint16); + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)ma); + mb->tdir_count=(uint64)(*(uint32*)ma); + ma+=sizeof(uint32); + *(uint32*)(&mb->tdir_offset)=*(uint32*)ma; + ma+=sizeof(uint32); + } + else + { + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)ma); + mb->tdir_count=TIFFReadUInt64(ma); + ma+=sizeof(uint64); + mb->tdir_offset.toff_long8=TIFFReadUInt64(ma); + ma+=sizeof(uint64); + } + mb++; + } + _TIFFfree(origdir); + *pdir = dir; + return dircount16; +} + +/* + * Fetch a tag that is not handled by special case code. + */ +static int +TIFFFetchNormalTag(TIFF* tif, TIFFDirEntry* dp, int recover) +{ + static const char module[] = "TIFFFetchNormalTag"; + enum TIFFReadDirEntryErr err; + uint32 fii; + const TIFFField* fip = NULL; + TIFFReadDirectoryFindFieldInfo(tif,dp->tdir_tag,&fii); + if( fii == FAILED_FII ) + { + TIFFErrorExt(tif->tif_clientdata, "TIFFFetchNormalTag", + "No definition found for tag %d", + dp->tdir_tag); + return 0; + } + fip=tif->tif_fields[fii]; + assert(fip->set_field_type!=TIFF_SETGET_OTHER); /* if so, we shouldn't arrive here but deal with this in specialized code */ + assert(fip->set_field_type!=TIFF_SETGET_INT); /* if so, we shouldn't arrive here as this is only the case for pseudo-tags */ + err=TIFFReadDirEntryErrOk; + switch (fip->set_field_type) + { + case TIFF_SETGET_UNDEFINED: + break; + case TIFF_SETGET_ASCII: + { + uint8* data; + assert(fip->field_passcount==0); + err=TIFFReadDirEntryByteArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + uint8* ma; + uint32 mb; + int n; + ma=data; + mb=0; + while (mb<(uint32)dp->tdir_count) + { + if (*ma==0) + break; + ma++; + mb++; + } + if (mb+1<(uint32)dp->tdir_count) + TIFFWarningExt(tif->tif_clientdata,module,"ASCII value for tag \"%s\" contains null byte in value; value incorrectly truncated during reading due to implementation limitations",fip->field_name); + else if (mb+1>(uint32)dp->tdir_count) + { + uint8* o; + TIFFWarningExt(tif->tif_clientdata,module,"ASCII value for tag \"%s\" does not end in null byte",fip->field_name); + if ((uint32)dp->tdir_count+1!=dp->tdir_count+1) + o=NULL; + else + o=_TIFFmalloc((uint32)dp->tdir_count+1); + if (o==NULL) + { + if (data!=NULL) + _TIFFfree(data); + return(0); + } + _TIFFmemcpy(o,data,(uint32)dp->tdir_count); + o[(uint32)dp->tdir_count]=0; + if (data!=0) + _TIFFfree(data); + data=o; + } + n=TIFFSetField(tif,dp->tdir_tag,data); + if (data!=0) + _TIFFfree(data); + if (!n) + return(0); + } + } + break; + case TIFF_SETGET_UINT8: + { + uint8 data=0; + assert(fip->field_readcount==1); + assert(fip->field_passcount==0); + err=TIFFReadDirEntryByte(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + if (!TIFFSetField(tif,dp->tdir_tag,data)) + return(0); + } + } + break; + case TIFF_SETGET_UINT16: + { + uint16 data; + assert(fip->field_readcount==1); + assert(fip->field_passcount==0); + err=TIFFReadDirEntryShort(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + if (!TIFFSetField(tif,dp->tdir_tag,data)) + return(0); + } + } + break; + case TIFF_SETGET_UINT32: + { + uint32 data; + assert(fip->field_readcount==1); + assert(fip->field_passcount==0); + err=TIFFReadDirEntryLong(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + if (!TIFFSetField(tif,dp->tdir_tag,data)) + return(0); + } + } + break; + case TIFF_SETGET_UINT64: + { + uint64 data; + assert(fip->field_readcount==1); + assert(fip->field_passcount==0); + err=TIFFReadDirEntryLong8(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + if (!TIFFSetField(tif,dp->tdir_tag,data)) + return(0); + } + } + break; + case TIFF_SETGET_FLOAT: + { + float data; + assert(fip->field_readcount==1); + assert(fip->field_passcount==0); + err=TIFFReadDirEntryFloat(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + if (!TIFFSetField(tif,dp->tdir_tag,data)) + return(0); + } + } + break; + case TIFF_SETGET_DOUBLE: + { + double data; + assert(fip->field_readcount==1); + assert(fip->field_passcount==0); + err=TIFFReadDirEntryDouble(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + if (!TIFFSetField(tif,dp->tdir_tag,data)) + return(0); + } + } + break; + case TIFF_SETGET_IFD8: + { + uint64 data; + assert(fip->field_readcount==1); + assert(fip->field_passcount==0); + err=TIFFReadDirEntryIfd8(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + if (!TIFFSetField(tif,dp->tdir_tag,data)) + return(0); + } + } + break; + case TIFF_SETGET_UINT16_PAIR: + { + uint16* data; + assert(fip->field_readcount==2); + assert(fip->field_passcount==0); + if (dp->tdir_count!=2) { + TIFFWarningExt(tif->tif_clientdata,module, + "incorrect count for field \"%s\", expected 2, got %d", + fip->field_name,(int)dp->tdir_count); + return(0); + } + err=TIFFReadDirEntryShortArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,data[0],data[1]); + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C0_UINT8: + { + uint8* data; + assert(fip->field_readcount>=1); + assert(fip->field_passcount==0); + if (dp->tdir_count!=(uint64)fip->field_readcount) { + TIFFWarningExt(tif->tif_clientdata,module, + "incorrect count for field \"%s\", expected %d, got %d", + fip->field_name,(int) fip->field_readcount, (int)dp->tdir_count); + return 0; + } + else + { + err=TIFFReadDirEntryByteArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C0_UINT16: + { + uint16* data; + assert(fip->field_readcount>=1); + assert(fip->field_passcount==0); + if (dp->tdir_count!=(uint64)fip->field_readcount) + /* corrupt file */; + else + { + err=TIFFReadDirEntryShortArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C0_UINT32: + { + uint32* data; + assert(fip->field_readcount>=1); + assert(fip->field_passcount==0); + if (dp->tdir_count!=(uint64)fip->field_readcount) + /* corrupt file */; + else + { + err=TIFFReadDirEntryLongArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C0_FLOAT: + { + float* data; + assert(fip->field_readcount>=1); + assert(fip->field_passcount==0); + if (dp->tdir_count!=(uint64)fip->field_readcount) + /* corrupt file */; + else + { + err=TIFFReadDirEntryFloatArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C16_ASCII: + { + uint8* data; + assert(fip->field_readcount==TIFF_VARIABLE); + assert(fip->field_passcount==1); + if (dp->tdir_count>0xFFFF) + err=TIFFReadDirEntryErrCount; + else + { + err=TIFFReadDirEntryByteArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint16)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C16_UINT8: + { + uint8* data; + assert(fip->field_readcount==TIFF_VARIABLE); + assert(fip->field_passcount==1); + if (dp->tdir_count>0xFFFF) + err=TIFFReadDirEntryErrCount; + else + { + err=TIFFReadDirEntryByteArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint16)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C16_UINT16: + { + uint16* data; + assert(fip->field_readcount==TIFF_VARIABLE); + assert(fip->field_passcount==1); + if (dp->tdir_count>0xFFFF) + err=TIFFReadDirEntryErrCount; + else + { + err=TIFFReadDirEntryShortArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint16)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C16_UINT32: + { + uint32* data; + assert(fip->field_readcount==TIFF_VARIABLE); + assert(fip->field_passcount==1); + if (dp->tdir_count>0xFFFF) + err=TIFFReadDirEntryErrCount; + else + { + err=TIFFReadDirEntryLongArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint16)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C16_UINT64: + { + uint64* data; + assert(fip->field_readcount==TIFF_VARIABLE); + assert(fip->field_passcount==1); + if (dp->tdir_count>0xFFFF) + err=TIFFReadDirEntryErrCount; + else + { + err=TIFFReadDirEntryLong8Array(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint16)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C16_FLOAT: + { + float* data; + assert(fip->field_readcount==TIFF_VARIABLE); + assert(fip->field_passcount==1); + if (dp->tdir_count>0xFFFF) + err=TIFFReadDirEntryErrCount; + else + { + err=TIFFReadDirEntryFloatArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint16)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C16_DOUBLE: + { + double* data; + assert(fip->field_readcount==TIFF_VARIABLE); + assert(fip->field_passcount==1); + if (dp->tdir_count>0xFFFF) + err=TIFFReadDirEntryErrCount; + else + { + err=TIFFReadDirEntryDoubleArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint16)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C16_IFD8: + { + uint64* data; + assert(fip->field_readcount==TIFF_VARIABLE); + assert(fip->field_passcount==1); + if (dp->tdir_count>0xFFFF) + err=TIFFReadDirEntryErrCount; + else + { + err=TIFFReadDirEntryIfd8Array(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint16)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + } + break; + case TIFF_SETGET_C32_ASCII: + { + uint8* data; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntryByteArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C32_UINT8: + { + uint8* data; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntryByteArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C32_SINT8: + { + int8* data = NULL; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntrySbyteArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C32_UINT16: + { + uint16* data; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntryShortArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C32_SINT16: + { + int16* data = NULL; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntrySshortArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C32_UINT32: + { + uint32* data; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntryLongArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C32_SINT32: + { + int32* data = NULL; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntrySlongArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C32_UINT64: + { + uint64* data; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntryLong8Array(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C32_SINT64: + { + int64* data = NULL; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntrySlong8Array(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C32_FLOAT: + { + float* data; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntryFloatArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C32_DOUBLE: + { + double* data; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntryDoubleArray(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + case TIFF_SETGET_C32_IFD8: + { + uint64* data; + assert(fip->field_readcount==TIFF_VARIABLE2); + assert(fip->field_passcount==1); + err=TIFFReadDirEntryIfd8Array(tif,dp,&data); + if (err==TIFFReadDirEntryErrOk) + { + int m; + m=TIFFSetField(tif,dp->tdir_tag,(uint32)(dp->tdir_count),data); + if (data!=0) + _TIFFfree(data); + if (!m) + return(0); + } + } + break; + default: + assert(0); /* we should never get here */ + break; + } + if (err!=TIFFReadDirEntryErrOk) + { + TIFFReadDirEntryOutputErr(tif,err,module,fip ? fip->field_name : "unknown tagname",recover); + return(0); + } + return(1); +} + +/* + * Fetch a set of offsets or lengths. + * While this routine says "strips", in fact it's also used for tiles. + */ +static int +TIFFFetchStripThing(TIFF* tif, TIFFDirEntry* dir, uint32 nstrips, uint64** lpp) +{ + static const char module[] = "TIFFFetchStripThing"; + enum TIFFReadDirEntryErr err; + uint64* data; + err=TIFFReadDirEntryLong8Array(tif,dir,&data); + if (err!=TIFFReadDirEntryErrOk) + { + const TIFFField* fip = TIFFFieldWithTag(tif,dir->tdir_tag); + TIFFReadDirEntryOutputErr(tif,err,module,fip ? fip->field_name : "unknown tagname",0); + return(0); + } + if (dir->tdir_count!=(uint64)nstrips) + { + uint64* resizeddata; + resizeddata=(uint64*)_TIFFCheckMalloc(tif,nstrips,sizeof(uint64),"for strip array"); + if (resizeddata==0) { + _TIFFfree(data); + return(0); + } + if (dir->tdir_count<(uint64)nstrips) + { + _TIFFmemcpy(resizeddata,data,(uint32)dir->tdir_count*sizeof(uint64)); + _TIFFmemset(resizeddata+(uint32)dir->tdir_count,0,(nstrips-(uint32)dir->tdir_count)*sizeof(uint64)); + } + else + _TIFFmemcpy(resizeddata,data,nstrips*sizeof(uint64)); + _TIFFfree(data); + data=resizeddata; + } + *lpp=data; + return(1); +} + +/* + * Fetch and set the SubjectDistance EXIF tag. + */ +static int +TIFFFetchSubjectDistance(TIFF* tif, TIFFDirEntry* dir) +{ + static const char module[] = "TIFFFetchSubjectDistance"; + enum TIFFReadDirEntryErr err; + UInt64Aligned_t m; + m.l=0; + assert(sizeof(double)==8); + assert(sizeof(uint64)==8); + assert(sizeof(uint32)==4); + if (dir->tdir_count!=1) + err=TIFFReadDirEntryErrCount; + else if (dir->tdir_type!=TIFF_RATIONAL) + err=TIFFReadDirEntryErrType; + else + { + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint32 offset; + offset=*(uint32*)(&dir->tdir_offset); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&offset); + err=TIFFReadDirEntryData(tif,offset,8,m.i); + } + else + { + m.l=dir->tdir_offset.toff_long8; + err=TIFFReadDirEntryErrOk; + } + } + if (err==TIFFReadDirEntryErrOk) + { + double n; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong(m.i,2); + if (m.i[0]==0) + n=0.0; + else if (m.i[0]==0xFFFFFFFF) + /* + * XXX: Numerator 0xFFFFFFFF means that we have infinite + * distance. Indicate that with a negative floating point + * SubjectDistance value. + */ + n=-1.0; + else + n=(double)m.i[0]/(double)m.i[1]; + return(TIFFSetField(tif,dir->tdir_tag,n)); + } + else + { + TIFFReadDirEntryOutputErr(tif,err,module,"SubjectDistance",TRUE); + return(0); + } +} + +/* + * Replace a single strip (tile) of uncompressed data by multiple strips + * (tiles), each approximately STRIP_SIZE_DEFAULT bytes. This is useful for + * dealing with large images or for dealing with machines with a limited + * amount memory. + */ +static void +ChopUpSingleUncompressedStrip(TIFF* tif) +{ + register TIFFDirectory *td = &tif->tif_dir; + uint64 bytecount; + uint64 offset; + uint32 rowblock; + uint64 rowblockbytes; + uint64 stripbytes; + uint32 strip; + uint64 nstrips64; + uint32 nstrips32; + uint32 rowsperstrip; + uint64* newcounts; + uint64* newoffsets; + + bytecount = td->td_stripbytecount[0]; + offset = td->td_stripoffset[0]; + assert(td->td_planarconfig == PLANARCONFIG_CONTIG); + if ((td->td_photometric == PHOTOMETRIC_YCBCR)&& + (!isUpSampled(tif))) + rowblock = td->td_ycbcrsubsampling[1]; + else + rowblock = 1; + rowblockbytes = TIFFVTileSize64(tif, rowblock); + /* + * Make the rows hold at least one scanline, but fill specified amount + * of data if possible. + */ + if (rowblockbytes > STRIP_SIZE_DEFAULT) { + stripbytes = rowblockbytes; + rowsperstrip = rowblock; + } else if (rowblockbytes > 0 ) { + uint32 rowblocksperstrip; + rowblocksperstrip = (uint32) (STRIP_SIZE_DEFAULT / rowblockbytes); + rowsperstrip = rowblocksperstrip * rowblock; + stripbytes = rowblocksperstrip * rowblockbytes; + } + else + return; + + /* + * never increase the number of strips in an image + */ + if (rowsperstrip >= td->td_rowsperstrip) + return; + nstrips64 = TIFFhowmany_64(bytecount, stripbytes); + if ((nstrips64==0)||(nstrips64>0xFFFFFFFF)) /* something is wonky, do nothing. */ + return; + nstrips32 = (uint32)nstrips64; + + newcounts = (uint64*) _TIFFCheckMalloc(tif, nstrips32, sizeof (uint64), + "for chopped \"StripByteCounts\" array"); + newoffsets = (uint64*) _TIFFCheckMalloc(tif, nstrips32, sizeof (uint64), + "for chopped \"StripOffsets\" array"); + if (newcounts == NULL || newoffsets == NULL) { + /* + * Unable to allocate new strip information, give up and use + * the original one strip information. + */ + if (newcounts != NULL) + _TIFFfree(newcounts); + if (newoffsets != NULL) + _TIFFfree(newoffsets); + return; + } + /* + * Fill the strip information arrays with new bytecounts and offsets + * that reflect the broken-up format. + */ + for (strip = 0; strip < nstrips32; strip++) { + if (stripbytes > bytecount) + stripbytes = bytecount; + newcounts[strip] = stripbytes; + newoffsets[strip] = offset; + offset += stripbytes; + bytecount -= stripbytes; + } + /* + * Replace old single strip info with multi-strip info. + */ + td->td_stripsperimage = td->td_nstrips = nstrips32; + TIFFSetField(tif, TIFFTAG_ROWSPERSTRIP, rowsperstrip); + + _TIFFfree(td->td_stripbytecount); + _TIFFfree(td->td_stripoffset); + td->td_stripbytecount = newcounts; + td->td_stripoffset = newoffsets; + td->td_stripbytecountsorted = 1; +} + +int _TIFFFillStriles( TIFF *tif ) +{ +#if defined(DEFER_STRILE_LOAD) + register TIFFDirectory *td = &tif->tif_dir; + int return_value = 1; + + if( td->td_stripoffset != NULL ) + return 1; + + if( td->td_stripoffset_entry.tdir_count == 0 ) + return 0; + + if (!TIFFFetchStripThing(tif,&(td->td_stripoffset_entry), + td->td_nstrips,&td->td_stripoffset)) + { + return_value = 0; + } + + if (!TIFFFetchStripThing(tif,&(td->td_stripbytecount_entry), + td->td_nstrips,&td->td_stripbytecount)) + { + return_value = 0; + } + + _TIFFmemset( &(td->td_stripoffset_entry), 0, sizeof(TIFFDirEntry)); + _TIFFmemset( &(td->td_stripbytecount_entry), 0, sizeof(TIFFDirEntry)); + + if (tif->tif_dir.td_nstrips > 1 && return_value == 1 ) { + uint32 strip; + + tif->tif_dir.td_stripbytecountsorted = 1; + for (strip = 1; strip < tif->tif_dir.td_nstrips; strip++) { + if (tif->tif_dir.td_stripoffset[strip - 1] > + tif->tif_dir.td_stripoffset[strip]) { + tif->tif_dir.td_stripbytecountsorted = 0; + break; + } + } + } + + return return_value; +#else /* !defined(DEFER_STRILE_LOAD) */ + (void) tif; + return 1; +#endif +} + + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_dirwrite.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dirwrite.c new file mode 100644 index 000000000..fa20609e2 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dirwrite.c @@ -0,0 +1,2910 @@ +/* $Id: tif_dirwrite.c,v 1.77 2012-07-06 19:18:31 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * Directory Write Support Routines. + */ +#include "tiffiop.h" + +#ifdef HAVE_IEEEFP +#define TIFFCvtNativeToIEEEFloat(tif, n, fp) +#define TIFFCvtNativeToIEEEDouble(tif, n, dp) +#else +extern void TIFFCvtNativeToIEEEFloat(TIFF* tif, uint32 n, float* fp); +extern void TIFFCvtNativeToIEEEDouble(TIFF* tif, uint32 n, double* dp); +#endif + +static int TIFFWriteDirectorySec(TIFF* tif, int isimage, int imagedone, uint64* pdiroff); + +static int TIFFWriteDirectoryTagSampleformatArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, double* value); +#if 0 +static int TIFFWriteDirectoryTagSampleformatPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value); +#endif + +static int TIFFWriteDirectoryTagAscii(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, char* value); +static int TIFFWriteDirectoryTagUndefinedArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint8* value); +#ifdef notdef +static int TIFFWriteDirectoryTagByte(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint8 value); +#endif +static int TIFFWriteDirectoryTagByteArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint8* value); +#if 0 +static int TIFFWriteDirectoryTagBytePerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint8 value); +#endif +#ifdef notdef +static int TIFFWriteDirectoryTagSbyte(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int8 value); +#endif +static int TIFFWriteDirectoryTagSbyteArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int8* value); +#if 0 +static int TIFFWriteDirectoryTagSbytePerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int8 value); +#endif +static int TIFFWriteDirectoryTagShort(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint16 value); +static int TIFFWriteDirectoryTagShortArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint16* value); +static int TIFFWriteDirectoryTagShortPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint16 value); +#ifdef notdef +static int TIFFWriteDirectoryTagSshort(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int16 value); +#endif +static int TIFFWriteDirectoryTagSshortArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int16* value); +#if 0 +static int TIFFWriteDirectoryTagSshortPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int16 value); +#endif +static int TIFFWriteDirectoryTagLong(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 value); +static int TIFFWriteDirectoryTagLongArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint32* value); +#if 0 +static int TIFFWriteDirectoryTagLongPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 value); +#endif +#ifdef notdef +static int TIFFWriteDirectoryTagSlong(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int32 value); +#endif +static int TIFFWriteDirectoryTagSlongArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int32* value); +#if 0 +static int TIFFWriteDirectoryTagSlongPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int32 value); +#endif +#ifdef notdef +static int TIFFWriteDirectoryTagLong8(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint64 value); +#endif +static int TIFFWriteDirectoryTagLong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value); +#ifdef notdef +static int TIFFWriteDirectoryTagSlong8(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int64 value); +#endif +static int TIFFWriteDirectoryTagSlong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int64* value); +static int TIFFWriteDirectoryTagRational(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value); +static int TIFFWriteDirectoryTagRationalArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value); +static int TIFFWriteDirectoryTagSrationalArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value); +#ifdef notdef +static int TIFFWriteDirectoryTagFloat(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, float value); +#endif +static int TIFFWriteDirectoryTagFloatArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value); +#if 0 +static int TIFFWriteDirectoryTagFloatPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, float value); +#endif +#ifdef notdef +static int TIFFWriteDirectoryTagDouble(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value); +#endif +static int TIFFWriteDirectoryTagDoubleArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, double* value); +#if 0 +static int TIFFWriteDirectoryTagDoublePerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value); +#endif +static int TIFFWriteDirectoryTagIfdArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint32* value); +#ifdef notdef +static int TIFFWriteDirectoryTagIfd8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value); +#endif +static int TIFFWriteDirectoryTagShortLong(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 value); +static int TIFFWriteDirectoryTagLongLong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value); +static int TIFFWriteDirectoryTagIfdIfd8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value); +#ifdef notdef +static int TIFFWriteDirectoryTagShortLongLong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value); +#endif +static int TIFFWriteDirectoryTagColormap(TIFF* tif, uint32* ndir, TIFFDirEntry* dir); +static int TIFFWriteDirectoryTagTransferfunction(TIFF* tif, uint32* ndir, TIFFDirEntry* dir); +static int TIFFWriteDirectoryTagSubifd(TIFF* tif, uint32* ndir, TIFFDirEntry* dir); + +static int TIFFWriteDirectoryTagCheckedAscii(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, char* value); +static int TIFFWriteDirectoryTagCheckedUndefinedArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint8* value); +#ifdef notdef +static int TIFFWriteDirectoryTagCheckedByte(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint8 value); +#endif +static int TIFFWriteDirectoryTagCheckedByteArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint8* value); +#ifdef notdef +static int TIFFWriteDirectoryTagCheckedSbyte(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int8 value); +#endif +static int TIFFWriteDirectoryTagCheckedSbyteArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int8* value); +static int TIFFWriteDirectoryTagCheckedShort(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint16 value); +static int TIFFWriteDirectoryTagCheckedShortArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint16* value); +#ifdef notdef +static int TIFFWriteDirectoryTagCheckedSshort(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int16 value); +#endif +static int TIFFWriteDirectoryTagCheckedSshortArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int16* value); +static int TIFFWriteDirectoryTagCheckedLong(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 value); +static int TIFFWriteDirectoryTagCheckedLongArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint32* value); +#ifdef notdef +static int TIFFWriteDirectoryTagCheckedSlong(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int32 value); +#endif +static int TIFFWriteDirectoryTagCheckedSlongArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int32* value); +#ifdef notdef +static int TIFFWriteDirectoryTagCheckedLong8(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint64 value); +#endif +static int TIFFWriteDirectoryTagCheckedLong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value); +#ifdef notdef +static int TIFFWriteDirectoryTagCheckedSlong8(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int64 value); +#endif +static int TIFFWriteDirectoryTagCheckedSlong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int64* value); +static int TIFFWriteDirectoryTagCheckedRational(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value); +static int TIFFWriteDirectoryTagCheckedRationalArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value); +static int TIFFWriteDirectoryTagCheckedSrationalArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value); +#ifdef notdef +static int TIFFWriteDirectoryTagCheckedFloat(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, float value); +#endif +static int TIFFWriteDirectoryTagCheckedFloatArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value); +#ifdef notdef +static int TIFFWriteDirectoryTagCheckedDouble(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value); +#endif +static int TIFFWriteDirectoryTagCheckedDoubleArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, double* value); +static int TIFFWriteDirectoryTagCheckedIfdArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint32* value); +static int TIFFWriteDirectoryTagCheckedIfd8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value); + +static int TIFFWriteDirectoryTagData(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint16 datatype, uint32 count, uint32 datalength, void* data); + +static int TIFFLinkDirectory(TIFF*); + +/* + * Write the contents of the current directory + * to the specified file. This routine doesn't + * handle overwriting a directory with auxiliary + * storage that's been changed. + */ +int +TIFFWriteDirectory(TIFF* tif) +{ + return TIFFWriteDirectorySec(tif,TRUE,TRUE,NULL); +} + +/* + * Similar to TIFFWriteDirectory(), writes the directory out + * but leaves all data structures in memory so that it can be + * written again. This will make a partially written TIFF file + * readable before it is successfully completed/closed. + */ +int +TIFFCheckpointDirectory(TIFF* tif) +{ + int rc; + /* Setup the strips arrays, if they haven't already been. */ + if (tif->tif_dir.td_stripoffset == NULL) + (void) TIFFSetupStrips(tif); + rc = TIFFWriteDirectorySec(tif,TRUE,FALSE,NULL); + (void) TIFFSetWriteOffset(tif, TIFFSeekFile(tif, 0, SEEK_END)); + return rc; +} + +int +TIFFWriteCustomDirectory(TIFF* tif, uint64* pdiroff) +{ + return TIFFWriteDirectorySec(tif,FALSE,FALSE,pdiroff); +} + +/* + * Similar to TIFFWriteDirectory(), but if the directory has already + * been written once, it is relocated to the end of the file, in case it + * has changed in size. Note that this will result in the loss of the + * previously used directory space. + */ +int +TIFFRewriteDirectory( TIFF *tif ) +{ + static const char module[] = "TIFFRewriteDirectory"; + + /* We don't need to do anything special if it hasn't been written. */ + if( tif->tif_diroff == 0 ) + return TIFFWriteDirectory( tif ); + + /* + * Find and zero the pointer to this directory, so that TIFFLinkDirectory + * will cause it to be added after this directories current pre-link. + */ + + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + if (tif->tif_header.classic.tiff_diroff == tif->tif_diroff) + { + tif->tif_header.classic.tiff_diroff = 0; + tif->tif_diroff = 0; + + TIFFSeekFile(tif,4,SEEK_SET); + if (!WriteOK(tif, &(tif->tif_header.classic.tiff_diroff),4)) + { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "Error updating TIFF header"); + return (0); + } + } + else + { + uint32 nextdir; + nextdir = tif->tif_header.classic.tiff_diroff; + while(1) { + uint16 dircount; + uint32 nextnextdir; + + if (!SeekOK(tif, nextdir) || + !ReadOK(tif, &dircount, 2)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error fetching directory count"); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabShort(&dircount); + (void) TIFFSeekFile(tif, + nextdir+2+dircount*12, SEEK_SET); + if (!ReadOK(tif, &nextnextdir, 4)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error fetching directory link"); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong(&nextnextdir); + if (nextnextdir==tif->tif_diroff) + { + uint32 m; + m=0; + (void) TIFFSeekFile(tif, + nextdir+2+dircount*12, SEEK_SET); + if (!WriteOK(tif, &m, 4)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error writing directory link"); + return (0); + } + tif->tif_diroff=0; + break; + } + nextdir=nextnextdir; + } + } + } + else + { + if (tif->tif_header.big.tiff_diroff == tif->tif_diroff) + { + tif->tif_header.big.tiff_diroff = 0; + tif->tif_diroff = 0; + + TIFFSeekFile(tif,8,SEEK_SET); + if (!WriteOK(tif, &(tif->tif_header.big.tiff_diroff),8)) + { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "Error updating TIFF header"); + return (0); + } + } + else + { + uint64 nextdir; + nextdir = tif->tif_header.big.tiff_diroff; + while(1) { + uint64 dircount64; + uint16 dircount; + uint64 nextnextdir; + + if (!SeekOK(tif, nextdir) || + !ReadOK(tif, &dircount64, 8)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error fetching directory count"); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(&dircount64); + if (dircount64>0xFFFF) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Sanity check on tag count failed, likely corrupt TIFF"); + return (0); + } + dircount=(uint16)dircount64; + (void) TIFFSeekFile(tif, + nextdir+8+dircount*20, SEEK_SET); + if (!ReadOK(tif, &nextnextdir, 8)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error fetching directory link"); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(&nextnextdir); + if (nextnextdir==tif->tif_diroff) + { + uint64 m; + m=0; + (void) TIFFSeekFile(tif, + nextdir+8+dircount*20, SEEK_SET); + if (!WriteOK(tif, &m, 8)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error writing directory link"); + return (0); + } + tif->tif_diroff=0; + break; + } + nextdir=nextnextdir; + } + } + } + + /* + * Now use TIFFWriteDirectory() normally. + */ + + return TIFFWriteDirectory( tif ); +} + +static int +TIFFWriteDirectorySec(TIFF* tif, int isimage, int imagedone, uint64* pdiroff) +{ + static const char module[] = "TIFFWriteDirectorySec"; + uint32 ndir; + TIFFDirEntry* dir; + uint32 dirsize; + void* dirmem; + uint32 m; + if (tif->tif_mode == O_RDONLY) + return (1); + + _TIFFFillStriles( tif ); + + /* + * Clear write state so that subsequent images with + * different characteristics get the right buffers + * setup for them. + */ + if (imagedone) + { + if (tif->tif_flags & TIFF_POSTENCODE) + { + tif->tif_flags &= ~TIFF_POSTENCODE; + if (!(*tif->tif_postencode)(tif)) + { + TIFFErrorExt(tif->tif_clientdata,module, + "Error post-encoding before directory write"); + return (0); + } + } + (*tif->tif_close)(tif); /* shutdown encoder */ + /* + * Flush any data that might have been written + * by the compression close+cleanup routines. But + * be careful not to write stuff if we didn't add data + * in the previous steps as the "rawcc" data may well be + * a previously read tile/strip in mixed read/write mode. + */ + if (tif->tif_rawcc > 0 + && (tif->tif_flags & TIFF_BEENWRITING) != 0 ) + { + if( !TIFFFlushData1(tif) ) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Error flushing data before directory write"); + return (0); + } + } + if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) + { + _TIFFfree(tif->tif_rawdata); + tif->tif_rawdata = NULL; + tif->tif_rawcc = 0; + tif->tif_rawdatasize = 0; + tif->tif_rawdataoff = 0; + tif->tif_rawdataloaded = 0; + } + tif->tif_flags &= ~(TIFF_BEENWRITING|TIFF_BUFFERSETUP); + } + dir=NULL; + dirmem=NULL; + dirsize=0; + while (1) + { + ndir=0; + if (isimage) + { + if (TIFFFieldSet(tif,FIELD_IMAGEDIMENSIONS)) + { + if (!TIFFWriteDirectoryTagShortLong(tif,&ndir,dir,TIFFTAG_IMAGEWIDTH,tif->tif_dir.td_imagewidth)) + goto bad; + if (!TIFFWriteDirectoryTagShortLong(tif,&ndir,dir,TIFFTAG_IMAGELENGTH,tif->tif_dir.td_imagelength)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_TILEDIMENSIONS)) + { + if (!TIFFWriteDirectoryTagShortLong(tif,&ndir,dir,TIFFTAG_TILEWIDTH,tif->tif_dir.td_tilewidth)) + goto bad; + if (!TIFFWriteDirectoryTagShortLong(tif,&ndir,dir,TIFFTAG_TILELENGTH,tif->tif_dir.td_tilelength)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_RESOLUTION)) + { + if (!TIFFWriteDirectoryTagRational(tif,&ndir,dir,TIFFTAG_XRESOLUTION,tif->tif_dir.td_xresolution)) + goto bad; + if (!TIFFWriteDirectoryTagRational(tif,&ndir,dir,TIFFTAG_YRESOLUTION,tif->tif_dir.td_yresolution)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_POSITION)) + { + if (!TIFFWriteDirectoryTagRational(tif,&ndir,dir,TIFFTAG_XPOSITION,tif->tif_dir.td_xposition)) + goto bad; + if (!TIFFWriteDirectoryTagRational(tif,&ndir,dir,TIFFTAG_YPOSITION,tif->tif_dir.td_yposition)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_SUBFILETYPE)) + { + if (!TIFFWriteDirectoryTagLong(tif,&ndir,dir,TIFFTAG_SUBFILETYPE,tif->tif_dir.td_subfiletype)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_BITSPERSAMPLE)) + { + if (!TIFFWriteDirectoryTagShortPerSample(tif,&ndir,dir,TIFFTAG_BITSPERSAMPLE,tif->tif_dir.td_bitspersample)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_COMPRESSION)) + { + if (!TIFFWriteDirectoryTagShort(tif,&ndir,dir,TIFFTAG_COMPRESSION,tif->tif_dir.td_compression)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_PHOTOMETRIC)) + { + if (!TIFFWriteDirectoryTagShort(tif,&ndir,dir,TIFFTAG_PHOTOMETRIC,tif->tif_dir.td_photometric)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_THRESHHOLDING)) + { + if (!TIFFWriteDirectoryTagShort(tif,&ndir,dir,TIFFTAG_THRESHHOLDING,tif->tif_dir.td_threshholding)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_FILLORDER)) + { + if (!TIFFWriteDirectoryTagShort(tif,&ndir,dir,TIFFTAG_FILLORDER,tif->tif_dir.td_fillorder)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_ORIENTATION)) + { + if (!TIFFWriteDirectoryTagShort(tif,&ndir,dir,TIFFTAG_ORIENTATION,tif->tif_dir.td_orientation)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_SAMPLESPERPIXEL)) + { + if (!TIFFWriteDirectoryTagShort(tif,&ndir,dir,TIFFTAG_SAMPLESPERPIXEL,tif->tif_dir.td_samplesperpixel)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_ROWSPERSTRIP)) + { + if (!TIFFWriteDirectoryTagShortLong(tif,&ndir,dir,TIFFTAG_ROWSPERSTRIP,tif->tif_dir.td_rowsperstrip)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_MINSAMPLEVALUE)) + { + if (!TIFFWriteDirectoryTagShortPerSample(tif,&ndir,dir,TIFFTAG_MINSAMPLEVALUE,tif->tif_dir.td_minsamplevalue)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_MAXSAMPLEVALUE)) + { + if (!TIFFWriteDirectoryTagShortPerSample(tif,&ndir,dir,TIFFTAG_MAXSAMPLEVALUE,tif->tif_dir.td_maxsamplevalue)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_PLANARCONFIG)) + { + if (!TIFFWriteDirectoryTagShort(tif,&ndir,dir,TIFFTAG_PLANARCONFIG,tif->tif_dir.td_planarconfig)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_RESOLUTIONUNIT)) + { + if (!TIFFWriteDirectoryTagShort(tif,&ndir,dir,TIFFTAG_RESOLUTIONUNIT,tif->tif_dir.td_resolutionunit)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_PAGENUMBER)) + { + if (!TIFFWriteDirectoryTagShortArray(tif,&ndir,dir,TIFFTAG_PAGENUMBER,2,&tif->tif_dir.td_pagenumber[0])) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_STRIPBYTECOUNTS)) + { + if (!isTiled(tif)) + { + if (!TIFFWriteDirectoryTagLongLong8Array(tif,&ndir,dir,TIFFTAG_STRIPBYTECOUNTS,tif->tif_dir.td_nstrips,tif->tif_dir.td_stripbytecount)) + goto bad; + } + else + { + if (!TIFFWriteDirectoryTagLongLong8Array(tif,&ndir,dir,TIFFTAG_TILEBYTECOUNTS,tif->tif_dir.td_nstrips,tif->tif_dir.td_stripbytecount)) + goto bad; + } + } + if (TIFFFieldSet(tif,FIELD_STRIPOFFSETS)) + { + if (!isTiled(tif)) + { + if (!TIFFWriteDirectoryTagLongLong8Array(tif,&ndir,dir,TIFFTAG_STRIPOFFSETS,tif->tif_dir.td_nstrips,tif->tif_dir.td_stripoffset)) + goto bad; + } + else + { + if (!TIFFWriteDirectoryTagLongLong8Array(tif,&ndir,dir,TIFFTAG_TILEOFFSETS,tif->tif_dir.td_nstrips,tif->tif_dir.td_stripoffset)) + goto bad; + } + } + if (TIFFFieldSet(tif,FIELD_COLORMAP)) + { + if (!TIFFWriteDirectoryTagColormap(tif,&ndir,dir)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_EXTRASAMPLES)) + { + if (tif->tif_dir.td_extrasamples) + { + uint16 na; + uint16* nb; + TIFFGetFieldDefaulted(tif,TIFFTAG_EXTRASAMPLES,&na,&nb); + if (!TIFFWriteDirectoryTagShortArray(tif,&ndir,dir,TIFFTAG_EXTRASAMPLES,na,nb)) + goto bad; + } + } + if (TIFFFieldSet(tif,FIELD_SAMPLEFORMAT)) + { + if (!TIFFWriteDirectoryTagShortPerSample(tif,&ndir,dir,TIFFTAG_SAMPLEFORMAT,tif->tif_dir.td_sampleformat)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_SMINSAMPLEVALUE)) + { + if (!TIFFWriteDirectoryTagSampleformatArray(tif,&ndir,dir,TIFFTAG_SMINSAMPLEVALUE,tif->tif_dir.td_samplesperpixel,tif->tif_dir.td_sminsamplevalue)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_SMAXSAMPLEVALUE)) + { + if (!TIFFWriteDirectoryTagSampleformatArray(tif,&ndir,dir,TIFFTAG_SMAXSAMPLEVALUE,tif->tif_dir.td_samplesperpixel,tif->tif_dir.td_smaxsamplevalue)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_IMAGEDEPTH)) + { + if (!TIFFWriteDirectoryTagLong(tif,&ndir,dir,TIFFTAG_IMAGEDEPTH,tif->tif_dir.td_imagedepth)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_TILEDEPTH)) + { + if (!TIFFWriteDirectoryTagLong(tif,&ndir,dir,TIFFTAG_TILEDEPTH,tif->tif_dir.td_tiledepth)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_HALFTONEHINTS)) + { + if (!TIFFWriteDirectoryTagShortArray(tif,&ndir,dir,TIFFTAG_HALFTONEHINTS,2,&tif->tif_dir.td_halftonehints[0])) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_YCBCRSUBSAMPLING)) + { + if (!TIFFWriteDirectoryTagShortArray(tif,&ndir,dir,TIFFTAG_YCBCRSUBSAMPLING,2,&tif->tif_dir.td_ycbcrsubsampling[0])) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_YCBCRPOSITIONING)) + { + if (!TIFFWriteDirectoryTagShort(tif,&ndir,dir,TIFFTAG_YCBCRPOSITIONING,tif->tif_dir.td_ycbcrpositioning)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_REFBLACKWHITE)) + { + if (!TIFFWriteDirectoryTagRationalArray(tif,&ndir,dir,TIFFTAG_REFERENCEBLACKWHITE,6,tif->tif_dir.td_refblackwhite)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_TRANSFERFUNCTION)) + { + if (!TIFFWriteDirectoryTagTransferfunction(tif,&ndir,dir)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_INKNAMES)) + { + if (!TIFFWriteDirectoryTagAscii(tif,&ndir,dir,TIFFTAG_INKNAMES,tif->tif_dir.td_inknameslen,tif->tif_dir.td_inknames)) + goto bad; + } + if (TIFFFieldSet(tif,FIELD_SUBIFD)) + { + if (!TIFFWriteDirectoryTagSubifd(tif,&ndir,dir)) + goto bad; + } + { + uint32 n; + for (n=0; ntif_nfields; n++) { + const TIFFField* o; + o = tif->tif_fields[n]; + if ((o->field_bit>=FIELD_CODEC)&&(TIFFFieldSet(tif,o->field_bit))) + { + switch (o->get_field_type) + { + case TIFF_SETGET_ASCII: + { + uint32 pa; + char* pb; + assert(o->field_type==TIFF_ASCII); + assert(o->field_readcount==TIFF_VARIABLE); + assert(o->field_passcount==0); + TIFFGetField(tif,o->field_tag,&pb); + pa=(uint32)(strlen(pb)); + if (!TIFFWriteDirectoryTagAscii(tif,&ndir,dir,o->field_tag,pa,pb)) + goto bad; + } + break; + case TIFF_SETGET_UINT16: + { + uint16 p; + assert(o->field_type==TIFF_SHORT); + assert(o->field_readcount==1); + assert(o->field_passcount==0); + TIFFGetField(tif,o->field_tag,&p); + if (!TIFFWriteDirectoryTagShort(tif,&ndir,dir,o->field_tag,p)) + goto bad; + } + break; + case TIFF_SETGET_UINT32: + { + uint32 p; + assert(o->field_type==TIFF_LONG); + assert(o->field_readcount==1); + assert(o->field_passcount==0); + TIFFGetField(tif,o->field_tag,&p); + if (!TIFFWriteDirectoryTagLong(tif,&ndir,dir,o->field_tag,p)) + goto bad; + } + break; + case TIFF_SETGET_C32_UINT8: + { + uint32 pa; + void* pb; + assert(o->field_type==TIFF_UNDEFINED); + assert(o->field_readcount==TIFF_VARIABLE2); + assert(o->field_passcount==1); + TIFFGetField(tif,o->field_tag,&pa,&pb); + if (!TIFFWriteDirectoryTagUndefinedArray(tif,&ndir,dir,o->field_tag,pa,pb)) + goto bad; + } + break; + default: + assert(0); /* we should never get here */ + break; + } + } + } + } + } + for (m=0; m<(uint32)(tif->tif_dir.td_customValueCount); m++) + { + switch (tif->tif_dir.td_customValues[m].info->field_type) + { + case TIFF_ASCII: + if (!TIFFWriteDirectoryTagAscii(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_UNDEFINED: + if (!TIFFWriteDirectoryTagUndefinedArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_BYTE: + if (!TIFFWriteDirectoryTagByteArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_SBYTE: + if (!TIFFWriteDirectoryTagSbyteArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_SHORT: + if (!TIFFWriteDirectoryTagShortArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_SSHORT: + if (!TIFFWriteDirectoryTagSshortArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_LONG: + if (!TIFFWriteDirectoryTagLongArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_SLONG: + if (!TIFFWriteDirectoryTagSlongArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_LONG8: + if (!TIFFWriteDirectoryTagLong8Array(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_SLONG8: + if (!TIFFWriteDirectoryTagSlong8Array(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_RATIONAL: + if (!TIFFWriteDirectoryTagRationalArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_SRATIONAL: + if (!TIFFWriteDirectoryTagSrationalArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_FLOAT: + if (!TIFFWriteDirectoryTagFloatArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_DOUBLE: + if (!TIFFWriteDirectoryTagDoubleArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_IFD: + if (!TIFFWriteDirectoryTagIfdArray(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + case TIFF_IFD8: + if (!TIFFWriteDirectoryTagIfdIfd8Array(tif,&ndir,dir,tif->tif_dir.td_customValues[m].info->field_tag,tif->tif_dir.td_customValues[m].count,tif->tif_dir.td_customValues[m].value)) + goto bad; + break; + default: + assert(0); /* we should never get here */ + break; + } + } + if (dir!=NULL) + break; + dir=_TIFFmalloc(ndir*sizeof(TIFFDirEntry)); + if (dir==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + goto bad; + } + if (isimage) + { + if ((tif->tif_diroff==0)&&(!TIFFLinkDirectory(tif))) + goto bad; + } + else + tif->tif_diroff=(TIFFSeekFile(tif,0,SEEK_END)+1)&(~1); + if (pdiroff!=NULL) + *pdiroff=tif->tif_diroff; + if (!(tif->tif_flags&TIFF_BIGTIFF)) + dirsize=2+ndir*12+4; + else + dirsize=8+ndir*20+8; + tif->tif_dataoff=tif->tif_diroff+dirsize; + if (!(tif->tif_flags&TIFF_BIGTIFF)) + tif->tif_dataoff=(uint32)tif->tif_dataoff; + if ((tif->tif_dataofftif_diroff)||(tif->tif_dataoff<(uint64)dirsize)) + { + TIFFErrorExt(tif->tif_clientdata,module,"Maximum TIFF file size exceeded"); + goto bad; + } + if (tif->tif_dataoff&1) + tif->tif_dataoff++; + if (isimage) + tif->tif_curdir++; + } + if (isimage) + { + if (TIFFFieldSet(tif,FIELD_SUBIFD)&&(tif->tif_subifdoff==0)) + { + uint32 na; + TIFFDirEntry* nb; + for (na=0, nb=dir; ; na++, nb++) + { + assert(natdir_tag==TIFFTAG_SUBIFD) + break; + } + if (!(tif->tif_flags&TIFF_BIGTIFF)) + tif->tif_subifdoff=tif->tif_diroff+2+na*12+8; + else + tif->tif_subifdoff=tif->tif_diroff+8+na*20+12; + } + } + dirmem=_TIFFmalloc(dirsize); + if (dirmem==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + goto bad; + } + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint8* n; + uint32 nTmp; + TIFFDirEntry* o; + n=dirmem; + *(uint16*)n=ndir; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)n); + n+=2; + o=dir; + for (m=0; mtdir_tag; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)n); + n+=2; + *(uint16*)n=o->tdir_type; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)n); + n+=2; + nTmp = (uint32)o->tdir_count; + _TIFFmemcpy(n,&nTmp,4); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)n); + n+=4; + /* This is correct. The data has been */ + /* swabbed previously in TIFFWriteDirectoryTagData */ + _TIFFmemcpy(n,&o->tdir_offset,4); + n+=4; + o++; + } + nTmp = (uint32)tif->tif_nextdiroff; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&nTmp); + _TIFFmemcpy(n,&nTmp,4); + } + else + { + uint8* n; + TIFFDirEntry* o; + n=dirmem; + *(uint64*)n=ndir; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)n); + n+=8; + o=dir; + for (m=0; mtdir_tag; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)n); + n+=2; + *(uint16*)n=o->tdir_type; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)n); + n+=2; + _TIFFmemcpy(n,&o->tdir_count,8); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)n); + n+=8; + _TIFFmemcpy(n,&o->tdir_offset,8); + n+=8; + o++; + } + _TIFFmemcpy(n,&tif->tif_nextdiroff,8); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)n); + } + _TIFFfree(dir); + dir=NULL; + if (!SeekOK(tif,tif->tif_diroff)) + { + TIFFErrorExt(tif->tif_clientdata,module,"IO error writing directory"); + goto bad; + } + if (!WriteOK(tif,dirmem,(tmsize_t)dirsize)) + { + TIFFErrorExt(tif->tif_clientdata,module,"IO error writing directory"); + goto bad; + } + _TIFFfree(dirmem); + if (imagedone) + { + TIFFFreeDirectory(tif); + tif->tif_flags &= ~TIFF_DIRTYDIRECT; + tif->tif_flags &= ~TIFF_DIRTYSTRIP; + (*tif->tif_cleanup)(tif); + /* + * Reset directory-related state for subsequent + * directories. + */ + TIFFCreateDirectory(tif); + } + return(1); +bad: + if (dir!=NULL) + _TIFFfree(dir); + if (dirmem!=NULL) + _TIFFfree(dirmem); + return(0); +} + +static int +TIFFWriteDirectoryTagSampleformatArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, double* value) +{ + static const char module[] = "TIFFWriteDirectoryTagSampleformatArray"; + void* conv; + uint32 i; + int ok; + conv = _TIFFmalloc(count*sizeof(double)); + if (conv == NULL) + { + TIFFErrorExt(tif->tif_clientdata, module, "Out of memory"); + return (0); + } + + switch (tif->tif_dir.td_sampleformat) + { + case SAMPLEFORMAT_IEEEFP: + if (tif->tif_dir.td_bitspersample<=32) + { + for (i = 0; i < count; ++i) + ((float*)conv)[i] = (float)value[i]; + ok = TIFFWriteDirectoryTagFloatArray(tif,ndir,dir,tag,count,(float*)conv); + } + else + { + ok = TIFFWriteDirectoryTagDoubleArray(tif,ndir,dir,tag,count,value); + } + break; + case SAMPLEFORMAT_INT: + if (tif->tif_dir.td_bitspersample<=8) + { + for (i = 0; i < count; ++i) + ((int8*)conv)[i] = (int8)value[i]; + ok = TIFFWriteDirectoryTagSbyteArray(tif,ndir,dir,tag,count,(int8*)conv); + } + else if (tif->tif_dir.td_bitspersample<=16) + { + for (i = 0; i < count; ++i) + ((int16*)conv)[i] = (int16)value[i]; + ok = TIFFWriteDirectoryTagSshortArray(tif,ndir,dir,tag,count,(int16*)conv); + } + else + { + for (i = 0; i < count; ++i) + ((int32*)conv)[i] = (int32)value[i]; + ok = TIFFWriteDirectoryTagSlongArray(tif,ndir,dir,tag,count,(int32*)conv); + } + break; + case SAMPLEFORMAT_UINT: + if (tif->tif_dir.td_bitspersample<=8) + { + for (i = 0; i < count; ++i) + ((uint8*)conv)[i] = (uint8)value[i]; + ok = TIFFWriteDirectoryTagByteArray(tif,ndir,dir,tag,count,(uint8*)conv); + } + else if (tif->tif_dir.td_bitspersample<=16) + { + for (i = 0; i < count; ++i) + ((uint16*)conv)[i] = (uint16)value[i]; + ok = TIFFWriteDirectoryTagShortArray(tif,ndir,dir,tag,count,(uint16*)conv); + } + else + { + for (i = 0; i < count; ++i) + ((uint32*)conv)[i] = (uint32)value[i]; + ok = TIFFWriteDirectoryTagLongArray(tif,ndir,dir,tag,count,(uint32*)conv); + } + break; + default: + ok = 0; + } + + _TIFFfree(conv); + return (ok); +} + +#if 0 +static int +TIFFWriteDirectoryTagSampleformatPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value) +{ + switch (tif->tif_dir.td_sampleformat) + { + case SAMPLEFORMAT_IEEEFP: + if (tif->tif_dir.td_bitspersample<=32) + return(TIFFWriteDirectoryTagFloatPerSample(tif,ndir,dir,tag,(float)value)); + else + return(TIFFWriteDirectoryTagDoublePerSample(tif,ndir,dir,tag,value)); + case SAMPLEFORMAT_INT: + if (tif->tif_dir.td_bitspersample<=8) + return(TIFFWriteDirectoryTagSbytePerSample(tif,ndir,dir,tag,(int8)value)); + else if (tif->tif_dir.td_bitspersample<=16) + return(TIFFWriteDirectoryTagSshortPerSample(tif,ndir,dir,tag,(int16)value)); + else + return(TIFFWriteDirectoryTagSlongPerSample(tif,ndir,dir,tag,(int32)value)); + case SAMPLEFORMAT_UINT: + if (tif->tif_dir.td_bitspersample<=8) + return(TIFFWriteDirectoryTagBytePerSample(tif,ndir,dir,tag,(uint8)value)); + else if (tif->tif_dir.td_bitspersample<=16) + return(TIFFWriteDirectoryTagShortPerSample(tif,ndir,dir,tag,(uint16)value)); + else + return(TIFFWriteDirectoryTagLongPerSample(tif,ndir,dir,tag,(uint32)value)); + default: + return(1); + } +} +#endif + +static int +TIFFWriteDirectoryTagAscii(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, char* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedAscii(tif,ndir,dir,tag,count,value)); +} + +static int +TIFFWriteDirectoryTagUndefinedArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint8* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedUndefinedArray(tif,ndir,dir,tag,count,value)); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagByte(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint8 value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedByte(tif,ndir,dir,tag,value)); +} +#endif + +static int +TIFFWriteDirectoryTagByteArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint8* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedByteArray(tif,ndir,dir,tag,count,value)); +} + +#if 0 +static int +TIFFWriteDirectoryTagBytePerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint8 value) +{ + static const char module[] = "TIFFWriteDirectoryTagBytePerSample"; + uint8* m; + uint8* na; + uint16 nb; + int o; + if (dir==NULL) + { + (*ndir)++; + return(1); + } + m=_TIFFmalloc(tif->tif_dir.td_samplesperpixel*sizeof(uint8)); + if (m==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + for (na=m, nb=0; nbtif_dir.td_samplesperpixel; na++, nb++) + *na=value; + o=TIFFWriteDirectoryTagCheckedByteArray(tif,ndir,dir,tag,tif->tif_dir.td_samplesperpixel,m); + _TIFFfree(m); + return(o); +} +#endif + +#ifdef notdef +static int +TIFFWriteDirectoryTagSbyte(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int8 value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedSbyte(tif,ndir,dir,tag,value)); +} +#endif + +static int +TIFFWriteDirectoryTagSbyteArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int8* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedSbyteArray(tif,ndir,dir,tag,count,value)); +} + +#if 0 +static int +TIFFWriteDirectoryTagSbytePerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int8 value) +{ + static const char module[] = "TIFFWriteDirectoryTagSbytePerSample"; + int8* m; + int8* na; + uint16 nb; + int o; + if (dir==NULL) + { + (*ndir)++; + return(1); + } + m=_TIFFmalloc(tif->tif_dir.td_samplesperpixel*sizeof(int8)); + if (m==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + for (na=m, nb=0; nbtif_dir.td_samplesperpixel; na++, nb++) + *na=value; + o=TIFFWriteDirectoryTagCheckedSbyteArray(tif,ndir,dir,tag,tif->tif_dir.td_samplesperpixel,m); + _TIFFfree(m); + return(o); +} +#endif + +static int +TIFFWriteDirectoryTagShort(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint16 value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedShort(tif,ndir,dir,tag,value)); +} + +static int +TIFFWriteDirectoryTagShortArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint16* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedShortArray(tif,ndir,dir,tag,count,value)); +} + +static int +TIFFWriteDirectoryTagShortPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint16 value) +{ + static const char module[] = "TIFFWriteDirectoryTagShortPerSample"; + uint16* m; + uint16* na; + uint16 nb; + int o; + if (dir==NULL) + { + (*ndir)++; + return(1); + } + m=_TIFFmalloc(tif->tif_dir.td_samplesperpixel*sizeof(uint16)); + if (m==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + for (na=m, nb=0; nbtif_dir.td_samplesperpixel; na++, nb++) + *na=value; + o=TIFFWriteDirectoryTagCheckedShortArray(tif,ndir,dir,tag,tif->tif_dir.td_samplesperpixel,m); + _TIFFfree(m); + return(o); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagSshort(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int16 value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedSshort(tif,ndir,dir,tag,value)); +} +#endif + +static int +TIFFWriteDirectoryTagSshortArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int16* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedSshortArray(tif,ndir,dir,tag,count,value)); +} + +#if 0 +static int +TIFFWriteDirectoryTagSshortPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int16 value) +{ + static const char module[] = "TIFFWriteDirectoryTagSshortPerSample"; + int16* m; + int16* na; + uint16 nb; + int o; + if (dir==NULL) + { + (*ndir)++; + return(1); + } + m=_TIFFmalloc(tif->tif_dir.td_samplesperpixel*sizeof(int16)); + if (m==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + for (na=m, nb=0; nbtif_dir.td_samplesperpixel; na++, nb++) + *na=value; + o=TIFFWriteDirectoryTagCheckedSshortArray(tif,ndir,dir,tag,tif->tif_dir.td_samplesperpixel,m); + _TIFFfree(m); + return(o); +} +#endif + +static int +TIFFWriteDirectoryTagLong(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedLong(tif,ndir,dir,tag,value)); +} + +static int +TIFFWriteDirectoryTagLongArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint32* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedLongArray(tif,ndir,dir,tag,count,value)); +} + +#if 0 +static int +TIFFWriteDirectoryTagLongPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 value) +{ + static const char module[] = "TIFFWriteDirectoryTagLongPerSample"; + uint32* m; + uint32* na; + uint16 nb; + int o; + if (dir==NULL) + { + (*ndir)++; + return(1); + } + m=_TIFFmalloc(tif->tif_dir.td_samplesperpixel*sizeof(uint32)); + if (m==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + for (na=m, nb=0; nbtif_dir.td_samplesperpixel; na++, nb++) + *na=value; + o=TIFFWriteDirectoryTagCheckedLongArray(tif,ndir,dir,tag,tif->tif_dir.td_samplesperpixel,m); + _TIFFfree(m); + return(o); +} +#endif + +#ifdef notdef +static int +TIFFWriteDirectoryTagSlong(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int32 value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedSlong(tif,ndir,dir,tag,value)); +} +#endif + +static int +TIFFWriteDirectoryTagSlongArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int32* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedSlongArray(tif,ndir,dir,tag,count,value)); +} + +#if 0 +static int +TIFFWriteDirectoryTagSlongPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int32 value) +{ + static const char module[] = "TIFFWriteDirectoryTagSlongPerSample"; + int32* m; + int32* na; + uint16 nb; + int o; + if (dir==NULL) + { + (*ndir)++; + return(1); + } + m=_TIFFmalloc(tif->tif_dir.td_samplesperpixel*sizeof(int32)); + if (m==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + for (na=m, nb=0; nbtif_dir.td_samplesperpixel; na++, nb++) + *na=value; + o=TIFFWriteDirectoryTagCheckedSlongArray(tif,ndir,dir,tag,tif->tif_dir.td_samplesperpixel,m); + _TIFFfree(m); + return(o); +} +#endif + +#ifdef notdef +static int +TIFFWriteDirectoryTagLong8(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint64 value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedLong8(tif,ndir,dir,tag,value)); +} +#endif + +static int +TIFFWriteDirectoryTagLong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedLong8Array(tif,ndir,dir,tag,count,value)); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagSlong8(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int64 value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedSlong8(tif,ndir,dir,tag,value)); +} +#endif + +static int +TIFFWriteDirectoryTagSlong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int64* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedSlong8Array(tif,ndir,dir,tag,count,value)); +} + +static int +TIFFWriteDirectoryTagRational(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedRational(tif,ndir,dir,tag,value)); +} + +static int +TIFFWriteDirectoryTagRationalArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedRationalArray(tif,ndir,dir,tag,count,value)); +} + +static int +TIFFWriteDirectoryTagSrationalArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedSrationalArray(tif,ndir,dir,tag,count,value)); +} + +#ifdef notdef +static int TIFFWriteDirectoryTagFloat(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, float value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedFloat(tif,ndir,dir,tag,value)); +} +#endif + +static int TIFFWriteDirectoryTagFloatArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedFloatArray(tif,ndir,dir,tag,count,value)); +} + +#if 0 +static int TIFFWriteDirectoryTagFloatPerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, float value) +{ + static const char module[] = "TIFFWriteDirectoryTagFloatPerSample"; + float* m; + float* na; + uint16 nb; + int o; + if (dir==NULL) + { + (*ndir)++; + return(1); + } + m=_TIFFmalloc(tif->tif_dir.td_samplesperpixel*sizeof(float)); + if (m==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + for (na=m, nb=0; nbtif_dir.td_samplesperpixel; na++, nb++) + *na=value; + o=TIFFWriteDirectoryTagCheckedFloatArray(tif,ndir,dir,tag,tif->tif_dir.td_samplesperpixel,m); + _TIFFfree(m); + return(o); +} +#endif + +#ifdef notdef +static int TIFFWriteDirectoryTagDouble(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedDouble(tif,ndir,dir,tag,value)); +} +#endif + +static int TIFFWriteDirectoryTagDoubleArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, double* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedDoubleArray(tif,ndir,dir,tag,count,value)); +} + +#if 0 +static int TIFFWriteDirectoryTagDoublePerSample(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value) +{ + static const char module[] = "TIFFWriteDirectoryTagDoublePerSample"; + double* m; + double* na; + uint16 nb; + int o; + if (dir==NULL) + { + (*ndir)++; + return(1); + } + m=_TIFFmalloc(tif->tif_dir.td_samplesperpixel*sizeof(double)); + if (m==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + for (na=m, nb=0; nbtif_dir.td_samplesperpixel; na++, nb++) + *na=value; + o=TIFFWriteDirectoryTagCheckedDoubleArray(tif,ndir,dir,tag,tif->tif_dir.td_samplesperpixel,m); + _TIFFfree(m); + return(o); +} +#endif + +static int +TIFFWriteDirectoryTagIfdArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint32* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedIfdArray(tif,ndir,dir,tag,count,value)); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagIfd8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + return(TIFFWriteDirectoryTagCheckedIfd8Array(tif,ndir,dir,tag,count,value)); +} +#endif + +static int +TIFFWriteDirectoryTagShortLong(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 value) +{ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + if (value<=0xFFFF) + return(TIFFWriteDirectoryTagCheckedShort(tif,ndir,dir,tag,(uint16)value)); + else + return(TIFFWriteDirectoryTagCheckedLong(tif,ndir,dir,tag,value)); +} + +/************************************************************************/ +/* TIFFWriteDirectoryTagLongLong8Array() */ +/* */ +/* Write out LONG8 array as LONG8 for BigTIFF or LONG for */ +/* Classic TIFF with some checking. */ +/************************************************************************/ + +static int +TIFFWriteDirectoryTagLongLong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value) +{ + static const char module[] = "TIFFWriteDirectoryTagLongLong8Array"; + uint64* ma; + uint32 mb; + uint32* p; + uint32* q; + int o; + + /* is this just a counting pass? */ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + + /* We always write LONG8 for BigTIFF, no checking needed. */ + if( tif->tif_flags&TIFF_BIGTIFF ) + return TIFFWriteDirectoryTagCheckedLong8Array(tif,ndir,dir, + tag,count,value); + + /* + ** For classic tiff we want to verify everything is in range for LONG + ** and convert to long format. + */ + + p = _TIFFmalloc(count*sizeof(uint32)); + if (p==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + + for (q=p, ma=value, mb=0; mb0xFFFFFFFF) + { + TIFFErrorExt(tif->tif_clientdata,module, + "Attempt to write value larger than 0xFFFFFFFF in Classic TIFF file."); + _TIFFfree(p); + return(0); + } + *q= (uint32)(*ma); + } + + o=TIFFWriteDirectoryTagCheckedLongArray(tif,ndir,dir,tag,count,p); + _TIFFfree(p); + + return(o); +} + +/************************************************************************/ +/* TIFFWriteDirectoryTagIfdIfd8Array() */ +/* */ +/* Write either IFD8 or IFD array depending on file type. */ +/************************************************************************/ + +static int +TIFFWriteDirectoryTagIfdIfd8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value) +{ + static const char module[] = "TIFFWriteDirectoryTagIfdIfd8Array"; + uint64* ma; + uint32 mb; + uint32* p; + uint32* q; + int o; + + /* is this just a counting pass? */ + if (dir==NULL) + { + (*ndir)++; + return(1); + } + + /* We always write IFD8 for BigTIFF, no checking needed. */ + if( tif->tif_flags&TIFF_BIGTIFF ) + return TIFFWriteDirectoryTagCheckedIfd8Array(tif,ndir,dir, + tag,count,value); + + /* + ** For classic tiff we want to verify everything is in range for IFD + ** and convert to long format. + */ + + p = _TIFFmalloc(count*sizeof(uint32)); + if (p==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + + for (q=p, ma=value, mb=0; mb0xFFFFFFFF) + { + TIFFErrorExt(tif->tif_clientdata,module, + "Attempt to write value larger than 0xFFFFFFFF in Classic TIFF file."); + _TIFFfree(p); + return(0); + } + *q= (uint32)(*ma); + } + + o=TIFFWriteDirectoryTagCheckedIfdArray(tif,ndir,dir,tag,count,p); + _TIFFfree(p); + + return(o); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagShortLongLong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value) +{ + static const char module[] = "TIFFWriteDirectoryTagShortLongLong8Array"; + uint64* ma; + uint32 mb; + uint8 n; + int o; + if (dir==NULL) + { + (*ndir)++; + return(1); + } + n=0; + for (ma=value, mb=0; mb0xFFFF)) + n=1; + if ((n==1)&&(*ma>0xFFFFFFFF)) + { + n=2; + break; + } + } + if (n==0) + { + uint16* p; + uint16* q; + p=_TIFFmalloc(count*sizeof(uint16)); + if (p==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + for (ma=value, mb=0, q=p; mbtif_clientdata,module,"Out of memory"); + return(0); + } + for (ma=value, mb=0, q=p; mbtif_dir.td_bitspersample); + n=_TIFFmalloc(3*m*sizeof(uint16)); + if (n==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + _TIFFmemcpy(&n[0],tif->tif_dir.td_colormap[0],m*sizeof(uint16)); + _TIFFmemcpy(&n[m],tif->tif_dir.td_colormap[1],m*sizeof(uint16)); + _TIFFmemcpy(&n[2*m],tif->tif_dir.td_colormap[2],m*sizeof(uint16)); + o=TIFFWriteDirectoryTagCheckedShortArray(tif,ndir,dir,TIFFTAG_COLORMAP,3*m,n); + _TIFFfree(n); + return(o); +} + +static int +TIFFWriteDirectoryTagTransferfunction(TIFF* tif, uint32* ndir, TIFFDirEntry* dir) +{ + static const char module[] = "TIFFWriteDirectoryTagTransferfunction"; + uint32 m; + uint16 n; + uint16* o; + int p; + if (dir==NULL) + { + (*ndir)++; + return(1); + } + m=(1<tif_dir.td_bitspersample); + n=tif->tif_dir.td_samplesperpixel-tif->tif_dir.td_extrasamples; + /* + * Check if the table can be written as a single column, + * or if it must be written as 3 columns. Note that we + * write a 3-column tag if there are 2 samples/pixel and + * a single column of data won't suffice--hmm. + */ + if (n>3) + n=3; + if (n==3) + { + if (!_TIFFmemcmp(tif->tif_dir.td_transferfunction[0],tif->tif_dir.td_transferfunction[2],m*sizeof(uint16))) + n=2; + } + if (n==2) + { + if (!_TIFFmemcmp(tif->tif_dir.td_transferfunction[0],tif->tif_dir.td_transferfunction[1],m*sizeof(uint16))) + n=1; + } + if (n==0) + n=1; + o=_TIFFmalloc(n*m*sizeof(uint16)); + if (o==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + _TIFFmemcpy(&o[0],tif->tif_dir.td_transferfunction[0],m*sizeof(uint16)); + if (n>1) + _TIFFmemcpy(&o[m],tif->tif_dir.td_transferfunction[1],m*sizeof(uint16)); + if (n>2) + _TIFFmemcpy(&o[2*m],tif->tif_dir.td_transferfunction[2],m*sizeof(uint16)); + p=TIFFWriteDirectoryTagCheckedShortArray(tif,ndir,dir,TIFFTAG_TRANSFERFUNCTION,n*m,o); + _TIFFfree(o); + return(p); +} + +static int +TIFFWriteDirectoryTagSubifd(TIFF* tif, uint32* ndir, TIFFDirEntry* dir) +{ + static const char module[] = "TIFFWriteDirectoryTagSubifd"; + uint64 m; + int n; + if (tif->tif_dir.td_nsubifd==0) + return(1); + if (dir==NULL) + { + (*ndir)++; + return(1); + } + m=tif->tif_dataoff; + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint32* o; + uint64* pa; + uint32* pb; + uint16 p; + o=_TIFFmalloc(tif->tif_dir.td_nsubifd*sizeof(uint32)); + if (o==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + pa=tif->tif_dir.td_subifd; + pb=o; + for (p=0; p < tif->tif_dir.td_nsubifd; p++) + { + assert(pa != 0); + assert(*pa <= 0xFFFFFFFFUL); + *pb++=(uint32)(*pa++); + } + n=TIFFWriteDirectoryTagCheckedIfdArray(tif,ndir,dir,TIFFTAG_SUBIFD,tif->tif_dir.td_nsubifd,o); + _TIFFfree(o); + } + else + n=TIFFWriteDirectoryTagCheckedIfd8Array(tif,ndir,dir,TIFFTAG_SUBIFD,tif->tif_dir.td_nsubifd,tif->tif_dir.td_subifd); + if (!n) + return(0); + /* + * Total hack: if this directory includes a SubIFD + * tag then force the next directories to be + * written as ``sub directories'' of this one. This + * is used to write things like thumbnails and + * image masks that one wants to keep out of the + * normal directory linkage access mechanism. + */ + tif->tif_flags|=TIFF_INSUBIFD; + tif->tif_nsubifd=tif->tif_dir.td_nsubifd; + if (tif->tif_dir.td_nsubifd==1) + tif->tif_subifdoff=0; + else + tif->tif_subifdoff=m; + return(1); +} + +static int +TIFFWriteDirectoryTagCheckedAscii(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, char* value) +{ + assert(sizeof(char)==1); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_ASCII,count,count,value)); +} + +static int +TIFFWriteDirectoryTagCheckedUndefinedArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint8* value) +{ + assert(sizeof(uint8)==1); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_UNDEFINED,count,count,value)); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagCheckedByte(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint8 value) +{ + assert(sizeof(uint8)==1); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_BYTE,1,1,&value)); +} +#endif + +static int +TIFFWriteDirectoryTagCheckedByteArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint8* value) +{ + assert(sizeof(uint8)==1); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_BYTE,count,count,value)); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagCheckedSbyte(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int8 value) +{ + assert(sizeof(int8)==1); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_SBYTE,1,1,&value)); +} +#endif + +static int +TIFFWriteDirectoryTagCheckedSbyteArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int8* value) +{ + assert(sizeof(int8)==1); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_SBYTE,count,count,value)); +} + +static int +TIFFWriteDirectoryTagCheckedShort(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint16 value) +{ + uint16 m; + assert(sizeof(uint16)==2); + m=value; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort(&m); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_SHORT,1,2,&m)); +} + +static int +TIFFWriteDirectoryTagCheckedShortArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint16* value) +{ + assert(count<0x80000000); + assert(sizeof(uint16)==2); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfShort(value,count); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_SHORT,count,count*2,value)); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagCheckedSshort(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int16 value) +{ + int16 m; + assert(sizeof(int16)==2); + m=value; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort((uint16*)(&m)); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_SSHORT,1,2,&m)); +} +#endif + +static int +TIFFWriteDirectoryTagCheckedSshortArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int16* value) +{ + assert(count<0x80000000); + assert(sizeof(int16)==2); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfShort((uint16*)value,count); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_SSHORT,count,count*2,value)); +} + +static int +TIFFWriteDirectoryTagCheckedLong(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 value) +{ + uint32 m; + assert(sizeof(uint32)==4); + m=value; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&m); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_LONG,1,4,&m)); +} + +static int +TIFFWriteDirectoryTagCheckedLongArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint32* value) +{ + assert(count<0x40000000); + assert(sizeof(uint32)==4); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong(value,count); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_LONG,count,count*4,value)); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagCheckedSlong(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int32 value) +{ + int32 m; + assert(sizeof(int32)==4); + m=value; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong((uint32*)(&m)); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_SLONG,1,4,&m)); +} +#endif + +static int +TIFFWriteDirectoryTagCheckedSlongArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int32* value) +{ + assert(count<0x40000000); + assert(sizeof(int32)==4); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong((uint32*)value,count); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_SLONG,count,count*4,value)); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagCheckedLong8(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint64 value) +{ + uint64 m; + assert(sizeof(uint64)==8); + assert(tif->tif_flags&TIFF_BIGTIFF); + m=value; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8(&m); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_LONG8,1,8,&m)); +} +#endif + +static int +TIFFWriteDirectoryTagCheckedLong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value) +{ + assert(count<0x20000000); + assert(sizeof(uint64)==8); + assert(tif->tif_flags&TIFF_BIGTIFF); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong8(value,count); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_LONG8,count,count*8,value)); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagCheckedSlong8(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, int64 value) +{ + int64 m; + assert(sizeof(int64)==8); + assert(tif->tif_flags&TIFF_BIGTIFF); + m=value; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8((uint64*)(&m)); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_SLONG8,1,8,&m)); +} +#endif + +static int +TIFFWriteDirectoryTagCheckedSlong8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, int64* value) +{ + assert(count<0x20000000); + assert(sizeof(int64)==8); + assert(tif->tif_flags&TIFF_BIGTIFF); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong8((uint64*)value,count); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_SLONG8,count,count*8,value)); +} + +static int +TIFFWriteDirectoryTagCheckedRational(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value) +{ + uint32 m[2]; + assert(value>=0.0); + assert(sizeof(uint32)==4); + if (value<=0.0) + { + m[0]=0; + m[1]=1; + } + else if (value==(double)(uint32)value) + { + m[0]=(uint32)value; + m[1]=1; + } + else if (value<1.0) + { + m[0]=(uint32)(value*0xFFFFFFFF); + m[1]=0xFFFFFFFF; + } + else + { + m[0]=0xFFFFFFFF; + m[1]=(uint32)(0xFFFFFFFF/value); + } + if (tif->tif_flags&TIFF_SWAB) + { + TIFFSwabLong(&m[0]); + TIFFSwabLong(&m[1]); + } + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_RATIONAL,1,8,&m[0])); +} + +static int +TIFFWriteDirectoryTagCheckedRationalArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value) +{ + static const char module[] = "TIFFWriteDirectoryTagCheckedRationalArray"; + uint32* m; + float* na; + uint32* nb; + uint32 nc; + int o; + assert(sizeof(uint32)==4); + m=_TIFFmalloc(count*2*sizeof(uint32)); + if (m==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + for (na=value, nb=m, nc=0; nctif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong(m,count*2); + o=TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_RATIONAL,count,count*8,&m[0]); + _TIFFfree(m); + return(o); +} + +static int +TIFFWriteDirectoryTagCheckedSrationalArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value) +{ + static const char module[] = "TIFFWriteDirectoryTagCheckedSrationalArray"; + int32* m; + float* na; + int32* nb; + uint32 nc; + int o; + assert(sizeof(int32)==4); + m=_TIFFmalloc(count*2*sizeof(int32)); + if (m==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + for (na=value, nb=m, nc=0; nc-1.0) + { + nb[0]=-(int32)((-*na)*0x7FFFFFFF); + nb[1]=0x7FFFFFFF; + } + else + { + nb[0]=-0x7FFFFFFF; + nb[1]=(int32)(0x7FFFFFFF/(-*na)); + } + } + else + { + if (*na==(int32)(*na)) + { + nb[0]=(int32)(*na); + nb[1]=1; + } + else if (*na<1.0) + { + nb[0]=(int32)((*na)*0x7FFFFFFF); + nb[1]=0x7FFFFFFF; + } + else + { + nb[0]=0x7FFFFFFF; + nb[1]=(int32)(0x7FFFFFFF/(*na)); + } + } + } + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong((uint32*)m,count*2); + o=TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_SRATIONAL,count,count*8,&m[0]); + _TIFFfree(m); + return(o); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagCheckedFloat(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, float value) +{ + float m; + assert(sizeof(float)==4); + m=value; + TIFFCvtNativeToIEEEFloat(tif,1,&m); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabFloat(&m); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_FLOAT,1,4,&m)); +} +#endif + +static int +TIFFWriteDirectoryTagCheckedFloatArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, float* value) +{ + assert(count<0x40000000); + assert(sizeof(float)==4); + TIFFCvtNativeToIEEEFloat(tif,count,&value); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfFloat(value,count); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_FLOAT,count,count*4,value)); +} + +#ifdef notdef +static int +TIFFWriteDirectoryTagCheckedDouble(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, double value) +{ + double m; + assert(sizeof(double)==8); + m=value; + TIFFCvtNativeToIEEEDouble(tif,1,&m); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabDouble(&m); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_DOUBLE,1,8,&m)); +} +#endif + +static int +TIFFWriteDirectoryTagCheckedDoubleArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, double* value) +{ + assert(count<0x20000000); + assert(sizeof(double)==8); + TIFFCvtNativeToIEEEDouble(tif,count,&value); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfDouble(value,count); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_DOUBLE,count,count*8,value)); +} + +static int +TIFFWriteDirectoryTagCheckedIfdArray(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint32* value) +{ + assert(count<0x40000000); + assert(sizeof(uint32)==4); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong(value,count); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_IFD,count,count*4,value)); +} + +static int +TIFFWriteDirectoryTagCheckedIfd8Array(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint32 count, uint64* value) +{ + assert(count<0x20000000); + assert(sizeof(uint64)==8); + assert(tif->tif_flags&TIFF_BIGTIFF); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabArrayOfLong8(value,count); + return(TIFFWriteDirectoryTagData(tif,ndir,dir,tag,TIFF_IFD8,count,count*8,value)); +} + +static int +TIFFWriteDirectoryTagData(TIFF* tif, uint32* ndir, TIFFDirEntry* dir, uint16 tag, uint16 datatype, uint32 count, uint32 datalength, void* data) +{ + static const char module[] = "TIFFWriteDirectoryTagData"; + uint32 m; + m=0; + while (m<(*ndir)) + { + assert(dir[m].tdir_tag!=tag); + if (dir[m].tdir_tag>tag) + break; + m++; + } + if (m<(*ndir)) + { + uint32 n; + for (n=*ndir; n>m; n--) + dir[n]=dir[n-1]; + } + dir[m].tdir_tag=tag; + dir[m].tdir_type=datatype; + dir[m].tdir_count=count; + dir[m].tdir_offset.toff_long8 = 0; + if (datalength<=((tif->tif_flags&TIFF_BIGTIFF)?0x8U:0x4U)) + _TIFFmemcpy(&dir[m].tdir_offset,data,datalength); + else + { + uint64 na,nb; + na=tif->tif_dataoff; + nb=na+datalength; + if (!(tif->tif_flags&TIFF_BIGTIFF)) + nb=(uint32)nb; + if ((nbtif_clientdata,module,"Maximum TIFF file size exceeded"); + return(0); + } + if (!SeekOK(tif,na)) + { + TIFFErrorExt(tif->tif_clientdata,module,"IO error writing tag data"); + return(0); + } + assert(datalength<0x80000000UL); + if (!WriteOK(tif,data,(tmsize_t)datalength)) + { + TIFFErrorExt(tif->tif_clientdata,module,"IO error writing tag data"); + return(0); + } + tif->tif_dataoff=nb; + if (tif->tif_dataoff&1) + tif->tif_dataoff++; + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint32 o; + o=(uint32)na; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong(&o); + _TIFFmemcpy(&dir[m].tdir_offset,&o,4); + } + else + { + dir[m].tdir_offset.toff_long8 = na; + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8(&dir[m].tdir_offset.toff_long8); + } + } + (*ndir)++; + return(1); +} + +/* + * Link the current directory into the directory chain for the file. + */ +static int +TIFFLinkDirectory(TIFF* tif) +{ + static const char module[] = "TIFFLinkDirectory"; + + tif->tif_diroff = (TIFFSeekFile(tif,0,SEEK_END)+1) &~ 1; + + /* + * Handle SubIFDs + */ + if (tif->tif_flags & TIFF_INSUBIFD) + { + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint32 m; + m = (uint32)tif->tif_diroff; + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong(&m); + (void) TIFFSeekFile(tif, tif->tif_subifdoff, SEEK_SET); + if (!WriteOK(tif, &m, 4)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error writing SubIFD directory link"); + return (0); + } + /* + * Advance to the next SubIFD or, if this is + * the last one configured, revert back to the + * normal directory linkage. + */ + if (--tif->tif_nsubifd) + tif->tif_subifdoff += 4; + else + tif->tif_flags &= ~TIFF_INSUBIFD; + return (1); + } + else + { + uint64 m; + m = tif->tif_diroff; + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(&m); + (void) TIFFSeekFile(tif, tif->tif_subifdoff, SEEK_SET); + if (!WriteOK(tif, &m, 8)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error writing SubIFD directory link"); + return (0); + } + /* + * Advance to the next SubIFD or, if this is + * the last one configured, revert back to the + * normal directory linkage. + */ + if (--tif->tif_nsubifd) + tif->tif_subifdoff += 8; + else + tif->tif_flags &= ~TIFF_INSUBIFD; + return (1); + } + } + + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint32 m; + uint32 nextdir; + m = (uint32)(tif->tif_diroff); + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong(&m); + if (tif->tif_header.classic.tiff_diroff == 0) { + /* + * First directory, overwrite offset in header. + */ + tif->tif_header.classic.tiff_diroff = (uint32) tif->tif_diroff; + (void) TIFFSeekFile(tif,4, SEEK_SET); + if (!WriteOK(tif, &m, 4)) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "Error writing TIFF header"); + return (0); + } + return (1); + } + /* + * Not the first directory, search to the last and append. + */ + nextdir = tif->tif_header.classic.tiff_diroff; + while(1) { + uint16 dircount; + uint32 nextnextdir; + + if (!SeekOK(tif, nextdir) || + !ReadOK(tif, &dircount, 2)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error fetching directory count"); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabShort(&dircount); + (void) TIFFSeekFile(tif, + nextdir+2+dircount*12, SEEK_SET); + if (!ReadOK(tif, &nextnextdir, 4)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error fetching directory link"); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong(&nextnextdir); + if (nextnextdir==0) + { + (void) TIFFSeekFile(tif, + nextdir+2+dircount*12, SEEK_SET); + if (!WriteOK(tif, &m, 4)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error writing directory link"); + return (0); + } + break; + } + nextdir=nextnextdir; + } + } + else + { + uint64 m; + uint64 nextdir; + m = tif->tif_diroff; + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(&m); + if (tif->tif_header.big.tiff_diroff == 0) { + /* + * First directory, overwrite offset in header. + */ + tif->tif_header.big.tiff_diroff = tif->tif_diroff; + (void) TIFFSeekFile(tif,8, SEEK_SET); + if (!WriteOK(tif, &m, 8)) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "Error writing TIFF header"); + return (0); + } + return (1); + } + /* + * Not the first directory, search to the last and append. + */ + nextdir = tif->tif_header.big.tiff_diroff; + while(1) { + uint64 dircount64; + uint16 dircount; + uint64 nextnextdir; + + if (!SeekOK(tif, nextdir) || + !ReadOK(tif, &dircount64, 8)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error fetching directory count"); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(&dircount64); + if (dircount64>0xFFFF) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Sanity check on tag count failed, likely corrupt TIFF"); + return (0); + } + dircount=(uint16)dircount64; + (void) TIFFSeekFile(tif, + nextdir+8+dircount*20, SEEK_SET); + if (!ReadOK(tif, &nextnextdir, 8)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error fetching directory link"); + return (0); + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(&nextnextdir); + if (nextnextdir==0) + { + (void) TIFFSeekFile(tif, + nextdir+8+dircount*20, SEEK_SET); + if (!WriteOK(tif, &m, 8)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error writing directory link"); + return (0); + } + break; + } + nextdir=nextnextdir; + } + } + return (1); +} + +/************************************************************************/ +/* TIFFRewriteField() */ +/* */ +/* Rewrite a field in the directory on disk without regard to */ +/* updating the TIFF directory structure in memory. Currently */ +/* only supported for field that already exist in the on-disk */ +/* directory. Mainly used for updating stripoffset / */ +/* stripbytecount values after the directory is already on */ +/* disk. */ +/* */ +/* Returns zero on failure, and one on success. */ +/************************************************************************/ + +int +_TIFFRewriteField(TIFF* tif, uint16 tag, TIFFDataType in_datatype, + tmsize_t count, void* data) +{ + static const char module[] = "TIFFResetField"; + /* const TIFFField* fip = NULL; */ + uint16 dircount; + tmsize_t dirsize; + uint8 direntry_raw[20]; + uint16 entry_tag = 0; + uint16 entry_type = 0; + uint64 entry_count = 0; + uint64 entry_offset = 0; + int value_in_entry = 0; + uint64 read_offset; + uint8 *buf_to_write = NULL; + TIFFDataType datatype; + +/* -------------------------------------------------------------------- */ +/* Find field definition. */ +/* -------------------------------------------------------------------- */ + /*fip =*/ TIFFFindField(tif, tag, TIFF_ANY); + +/* -------------------------------------------------------------------- */ +/* Do some checking this is a straight forward case. */ +/* -------------------------------------------------------------------- */ + if( isMapped(tif) ) + { + TIFFErrorExt( tif->tif_clientdata, module, + "Memory mapped files not currently supported for this operation." ); + return 0; + } + + if( tif->tif_diroff == 0 ) + { + TIFFErrorExt( tif->tif_clientdata, module, + "Attempt to reset field on directory not already on disk." ); + return 0; + } + +/* -------------------------------------------------------------------- */ +/* Read the directory entry count. */ +/* -------------------------------------------------------------------- */ + if (!SeekOK(tif, tif->tif_diroff)) { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Seek error accessing TIFF directory", + tif->tif_name); + return 0; + } + + read_offset = tif->tif_diroff; + + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + if (!ReadOK(tif, &dircount, sizeof (uint16))) { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Can not read TIFF directory count", + tif->tif_name); + return 0; + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabShort(&dircount); + dirsize = 12; + read_offset += 2; + } else { + uint64 dircount64; + if (!ReadOK(tif, &dircount64, sizeof (uint64))) { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Can not read TIFF directory count", + tif->tif_name); + return 0; + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong8(&dircount64); + dircount = (uint16)dircount64; + dirsize = 20; + read_offset += 8; + } + +/* -------------------------------------------------------------------- */ +/* Read through directory to find target tag. */ +/* -------------------------------------------------------------------- */ + while( dircount > 0 ) + { + if (!ReadOK(tif, direntry_raw, dirsize)) { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Can not read TIFF directory entry.", + tif->tif_name); + return 0; + } + + memcpy( &entry_tag, direntry_raw + 0, sizeof(uint16) ); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort( &entry_tag ); + + if( entry_tag == tag ) + break; + + read_offset += dirsize; + } + + if( entry_tag != tag ) + { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Could not find tag %d.", + tif->tif_name, tag ); + return 0; + } + +/* -------------------------------------------------------------------- */ +/* Extract the type, count and offset for this entry. */ +/* -------------------------------------------------------------------- */ + memcpy( &entry_type, direntry_raw + 2, sizeof(uint16) ); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort( &entry_type ); + + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint32 value; + + memcpy( &value, direntry_raw + 4, sizeof(uint32) ); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong( &value ); + entry_count = value; + + memcpy( &value, direntry_raw + 8, sizeof(uint32) ); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong( &value ); + entry_offset = value; + } + else + { + memcpy( &entry_count, direntry_raw + 4, sizeof(uint64) ); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8( &entry_count ); + + memcpy( &entry_offset, direntry_raw + 12, sizeof(uint64) ); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8( &entry_offset ); + } + +/* -------------------------------------------------------------------- */ +/* What data type do we want to write this as? */ +/* -------------------------------------------------------------------- */ + if( TIFFDataWidth(in_datatype) == 8 && !(tif->tif_flags&TIFF_BIGTIFF) ) + { + if( in_datatype == TIFF_LONG8 ) + datatype = TIFF_LONG; + else if( in_datatype == TIFF_SLONG8 ) + datatype = TIFF_SLONG; + else if( in_datatype == TIFF_IFD8 ) + datatype = TIFF_IFD; + else + datatype = in_datatype; + } + else + datatype = in_datatype; + +/* -------------------------------------------------------------------- */ +/* Prepare buffer of actual data to write. This includes */ +/* swabbing as needed. */ +/* -------------------------------------------------------------------- */ + buf_to_write = + (uint8 *)_TIFFCheckMalloc(tif, count, TIFFDataWidth(datatype), + "for field buffer."); + if (!buf_to_write) + return 0; + + if( datatype == in_datatype ) + memcpy( buf_to_write, data, count * TIFFDataWidth(datatype) ); + else if( datatype == TIFF_SLONG && in_datatype == TIFF_SLONG8 ) + { + tmsize_t i; + + for( i = 0; i < count; i++ ) + { + ((int32 *) buf_to_write)[i] = + (int32) ((int64 *) data)[i]; + if( (int64) ((int32 *) buf_to_write)[i] != ((int64 *) data)[i] ) + { + _TIFFfree( buf_to_write ); + TIFFErrorExt( tif->tif_clientdata, module, + "Value exceeds 32bit range of output type." ); + return 0; + } + } + } + else if( (datatype == TIFF_LONG && in_datatype == TIFF_LONG8) + || (datatype == TIFF_IFD && in_datatype == TIFF_IFD8) ) + { + tmsize_t i; + + for( i = 0; i < count; i++ ) + { + ((uint32 *) buf_to_write)[i] = + (uint32) ((uint64 *) data)[i]; + if( (uint64) ((uint32 *) buf_to_write)[i] != ((uint64 *) data)[i] ) + { + _TIFFfree( buf_to_write ); + TIFFErrorExt( tif->tif_clientdata, module, + "Value exceeds 32bit range of output type." ); + return 0; + } + } + } + + if( TIFFDataWidth(datatype) > 1 && (tif->tif_flags&TIFF_SWAB) ) + { + if( TIFFDataWidth(datatype) == 2 ) + TIFFSwabArrayOfShort( (uint16 *) buf_to_write, count ); + else if( TIFFDataWidth(datatype) == 4 ) + TIFFSwabArrayOfLong( (uint32 *) buf_to_write, count ); + else if( TIFFDataWidth(datatype) == 8 ) + TIFFSwabArrayOfLong8( (uint64 *) buf_to_write, count ); + } + +/* -------------------------------------------------------------------- */ +/* Is this a value that fits into the directory entry? */ +/* -------------------------------------------------------------------- */ + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + if( TIFFDataWidth(datatype) * count <= 4 ) + { + entry_offset = read_offset + 8; + value_in_entry = 1; + } + } + else + { + if( TIFFDataWidth(datatype) * count <= 8 ) + { + entry_offset = read_offset + 12; + value_in_entry = 1; + } + } + +/* -------------------------------------------------------------------- */ +/* If the tag type, and count match, then we just write it out */ +/* over the old values without altering the directory entry at */ +/* all. */ +/* -------------------------------------------------------------------- */ + if( entry_count == (uint64)count && entry_type == (uint16) datatype ) + { + if (!SeekOK(tif, entry_offset)) { + _TIFFfree( buf_to_write ); + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Seek error accessing TIFF directory", + tif->tif_name); + return 0; + } + if (!WriteOK(tif, buf_to_write, count*TIFFDataWidth(datatype))) { + _TIFFfree( buf_to_write ); + TIFFErrorExt(tif->tif_clientdata, module, + "Error writing directory link"); + return (0); + } + + _TIFFfree( buf_to_write ); + return 1; + } + +/* -------------------------------------------------------------------- */ +/* Otherwise, we write the new tag data at the end of the file. */ +/* -------------------------------------------------------------------- */ + if( !value_in_entry ) + { + entry_offset = TIFFSeekFile(tif,0,SEEK_END); + + if (!WriteOK(tif, buf_to_write, count*TIFFDataWidth(datatype))) { + _TIFFfree( buf_to_write ); + TIFFErrorExt(tif->tif_clientdata, module, + "Error writing directory link"); + return (0); + } + + _TIFFfree( buf_to_write ); + } + else + { + memcpy( &entry_offset, buf_to_write, count*TIFFDataWidth(datatype)); + } + +/* -------------------------------------------------------------------- */ +/* Adjust the directory entry. */ +/* -------------------------------------------------------------------- */ + entry_type = datatype; + memcpy( direntry_raw + 2, &entry_type, sizeof(uint16) ); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabShort( (uint16 *) (direntry_raw + 2) ); + + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + uint32 value; + + value = (uint32) entry_count; + memcpy( direntry_raw + 4, &value, sizeof(uint32) ); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong( (uint32 *) (direntry_raw + 4) ); + + value = (uint32) entry_offset; + memcpy( direntry_raw + 8, &value, sizeof(uint32) ); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong( (uint32 *) (direntry_raw + 8) ); + } + else + { + memcpy( direntry_raw + 4, &entry_count, sizeof(uint64) ); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8( (uint64 *) (direntry_raw + 4) ); + + memcpy( direntry_raw + 12, &entry_offset, sizeof(uint64) ); + if (tif->tif_flags&TIFF_SWAB) + TIFFSwabLong8( (uint64 *) (direntry_raw + 12) ); + } + +/* -------------------------------------------------------------------- */ +/* Write the directory entry out to disk. */ +/* -------------------------------------------------------------------- */ + if (!SeekOK(tif, read_offset )) { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Seek error accessing TIFF directory", + tif->tif_name); + return 0; + } + + if (!WriteOK(tif, direntry_raw,dirsize)) + { + TIFFErrorExt(tif->tif_clientdata, module, + "%s: Can not write TIFF directory entry.", + tif->tif_name); + return 0; + } + + return 1; +} +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_dumpmode.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dumpmode.c new file mode 100644 index 000000000..a94cf0b34 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_dumpmode.c @@ -0,0 +1,143 @@ +/* $Header: /cvs/maptools/cvsroot/libtiff/libtiff/tif_dumpmode.c,v 1.14 2011-04-02 20:54:09 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * "Null" Compression Algorithm Support. + */ +#include "tiffiop.h" + +static int +DumpFixupTags(TIFF* tif) +{ + (void) tif; + return (1); +} + +/* + * Encode a hunk of pixels. + */ +static int +DumpModeEncode(TIFF* tif, uint8* pp, tmsize_t cc, uint16 s) +{ + (void) s; + while (cc > 0) { + tmsize_t n; + + n = cc; + if (tif->tif_rawcc + n > tif->tif_rawdatasize) + n = tif->tif_rawdatasize - tif->tif_rawcc; + + assert( n > 0 ); + + /* + * Avoid copy if client has setup raw + * data buffer to avoid extra copy. + */ + if (tif->tif_rawcp != pp) + _TIFFmemcpy(tif->tif_rawcp, pp, n); + tif->tif_rawcp += n; + tif->tif_rawcc += n; + pp += n; + cc -= n; + if (tif->tif_rawcc >= tif->tif_rawdatasize && + !TIFFFlushData1(tif)) + return (-1); + } + return (1); +} + +/* + * Decode a hunk of pixels. + */ +static int +DumpModeDecode(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s) +{ + static const char module[] = "DumpModeDecode"; + (void) s; + if (tif->tif_rawcc < cc) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, +"Not enough data for scanline %lu, expected a request for at most %I64d bytes, got a request for %I64d bytes", + (unsigned long) tif->tif_row, + (signed __int64) tif->tif_rawcc, + (signed __int64) cc); +#else + TIFFErrorExt(tif->tif_clientdata, module, +"Not enough data for scanline %lu, expected a request for at most %lld bytes, got a request for %lld bytes", + (unsigned long) tif->tif_row, + (signed long long) tif->tif_rawcc, + (signed long long) cc); +#endif + return (0); + } + /* + * Avoid copy if client has setup raw + * data buffer to avoid extra copy. + */ + if (tif->tif_rawcp != buf) + _TIFFmemcpy(buf, tif->tif_rawcp, cc); + tif->tif_rawcp += cc; + tif->tif_rawcc -= cc; + return (1); +} + +/* + * Seek forwards nrows in the current strip. + */ +static int +DumpModeSeek(TIFF* tif, uint32 nrows) +{ + tif->tif_rawcp += nrows * tif->tif_scanlinesize; + tif->tif_rawcc -= nrows * tif->tif_scanlinesize; + return (1); +} + +/* + * Initialize dump mode. + */ +int +TIFFInitDumpMode(TIFF* tif, int scheme) +{ + (void) scheme; + tif->tif_fixuptags = DumpFixupTags; + tif->tif_decoderow = DumpModeDecode; + tif->tif_decodestrip = DumpModeDecode; + tif->tif_decodetile = DumpModeDecode; + tif->tif_encoderow = DumpModeEncode; + tif->tif_encodestrip = DumpModeEncode; + tif->tif_encodetile = DumpModeEncode; + tif->tif_seek = DumpModeSeek; + return (1); +} +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_error.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_error.c new file mode 100644 index 000000000..0bc8b878b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_error.c @@ -0,0 +1,80 @@ +/* $Header: /cvs/maptools/cvsroot/libtiff/libtiff/tif_error.c,v 1.5 2010-03-10 18:56:48 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + */ +#include "tiffiop.h" + +TIFFErrorHandlerExt _TIFFerrorHandlerExt = NULL; + +TIFFErrorHandler +TIFFSetErrorHandler(TIFFErrorHandler handler) +{ + TIFFErrorHandler prev = _TIFFerrorHandler; + _TIFFerrorHandler = handler; + return (prev); +} + +TIFFErrorHandlerExt +TIFFSetErrorHandlerExt(TIFFErrorHandlerExt handler) +{ + TIFFErrorHandlerExt prev = _TIFFerrorHandlerExt; + _TIFFerrorHandlerExt = handler; + return (prev); +} + +void +TIFFError(const char* module, const char* fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + if (_TIFFerrorHandler) + (*_TIFFerrorHandler)(module, fmt, ap); + if (_TIFFerrorHandlerExt) + (*_TIFFerrorHandlerExt)(0, module, fmt, ap); + va_end(ap); +} + +void +TIFFErrorExt(thandle_t fd, const char* module, const char* fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + if (_TIFFerrorHandler) + (*_TIFFerrorHandler)(module, fmt, ap); + if (_TIFFerrorHandlerExt) + (*_TIFFerrorHandlerExt)(fd, module, fmt, ap); + va_end(ap); +} + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_extension.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_extension.c new file mode 100644 index 000000000..10afd4162 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_extension.c @@ -0,0 +1,118 @@ +/* $Header: /cvs/maptools/cvsroot/libtiff/libtiff/tif_extension.c,v 1.7 2010-03-10 18:56:48 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * Various routines support external extension of the tag set, and other + * application extension capabilities. + */ + +#include "tiffiop.h" + +int TIFFGetTagListCount( TIFF *tif ) + +{ + TIFFDirectory* td = &tif->tif_dir; + + return td->td_customValueCount; +} + +uint32 TIFFGetTagListEntry( TIFF *tif, int tag_index ) + +{ + TIFFDirectory* td = &tif->tif_dir; + + if( tag_index < 0 || tag_index >= td->td_customValueCount ) + return (uint32)(-1); + else + return td->td_customValues[tag_index].info->field_tag; +} + +/* +** This provides read/write access to the TIFFTagMethods within the TIFF +** structure to application code without giving access to the private +** TIFF structure. +*/ +TIFFTagMethods *TIFFAccessTagMethods( TIFF *tif ) + +{ + return &(tif->tif_tagmethods); +} + +void *TIFFGetClientInfo( TIFF *tif, const char *name ) + +{ + TIFFClientInfoLink *link = tif->tif_clientinfo; + + while( link != NULL && strcmp(link->name,name) != 0 ) + link = link->next; + + if( link != NULL ) + return link->data; + else + return NULL; +} + +void TIFFSetClientInfo( TIFF *tif, void *data, const char *name ) + +{ + TIFFClientInfoLink *link = tif->tif_clientinfo; + + /* + ** Do we have an existing link with this name? If so, just + ** set it. + */ + while( link != NULL && strcmp(link->name,name) != 0 ) + link = link->next; + + if( link != NULL ) + { + link->data = data; + return; + } + + /* + ** Create a new link. + */ + + link = (TIFFClientInfoLink *) _TIFFmalloc(sizeof(TIFFClientInfoLink)); + assert (link != NULL); + link->next = tif->tif_clientinfo; + link->name = (char *) _TIFFmalloc((tmsize_t)(strlen(name)+1)); + assert (link->name != NULL); + strcpy(link->name, name); + link->data = data; + + tif->tif_clientinfo = link; +} +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3.c new file mode 100644 index 000000000..2b2dccd08 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3.c @@ -0,0 +1,1595 @@ +/* $Id: tif_fax3.c,v 1.74 2012-06-21 02:01:31 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1990-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tiffiop.h" +#ifdef CCITT_SUPPORT +/* + * TIFF Library. + * + * CCITT Group 3 (T.4) and Group 4 (T.6) Compression Support. + * + * This file contains support for decoding and encoding TIFF + * compression algorithms 2, 3, 4, and 32771. + * + * Decoder support is derived, with permission, from the code + * in Frank Cringle's viewfax program; + * Copyright (C) 1990, 1995 Frank D. Cringle. + */ +#include "tif_fax3.h" +#define G3CODES +#include "t4.h" +#include + +/* + * Compression+decompression state blocks are + * derived from this ``base state'' block. + */ +typedef struct { + int rw_mode; /* O_RDONLY for decode, else encode */ + int mode; /* operating mode */ + tmsize_t rowbytes; /* bytes in a decoded scanline */ + uint32 rowpixels; /* pixels in a scanline */ + + uint16 cleanfaxdata; /* CleanFaxData tag */ + uint32 badfaxrun; /* BadFaxRun tag */ + uint32 badfaxlines; /* BadFaxLines tag */ + uint32 groupoptions; /* Group 3/4 options tag */ + + TIFFVGetMethod vgetparent; /* super-class method */ + TIFFVSetMethod vsetparent; /* super-class method */ + TIFFPrintMethod printdir; /* super-class method */ +} Fax3BaseState; +#define Fax3State(tif) ((Fax3BaseState*) (tif)->tif_data) + +typedef enum { G3_1D, G3_2D } Ttag; +typedef struct { + Fax3BaseState b; + + /* Decoder state info */ + const unsigned char* bitmap; /* bit reversal table */ + uint32 data; /* current i/o byte/word */ + int bit; /* current i/o bit in byte */ + int EOLcnt; /* count of EOL codes recognized */ + TIFFFaxFillFunc fill; /* fill routine */ + uint32* runs; /* b&w runs for current/previous row */ + uint32* refruns; /* runs for reference line */ + uint32* curruns; /* runs for current line */ + + /* Encoder state info */ + Ttag tag; /* encoding state */ + unsigned char* refline; /* reference line for 2d decoding */ + int k; /* #rows left that can be 2d encoded */ + int maxk; /* max #rows that can be 2d encoded */ + + int line; +} Fax3CodecState; +#define DecoderState(tif) ((Fax3CodecState*) Fax3State(tif)) +#define EncoderState(tif) ((Fax3CodecState*) Fax3State(tif)) + +#define is2DEncoding(sp) (sp->b.groupoptions & GROUP3OPT_2DENCODING) +#define isAligned(p,t) ((((size_t)(p)) & (sizeof (t)-1)) == 0) + +/* + * Group 3 and Group 4 Decoding. + */ + +/* + * These macros glue the TIFF library state to + * the state expected by Frank's decoder. + */ +#define DECLARE_STATE(tif, sp, mod) \ + static const char module[] = mod; \ + Fax3CodecState* sp = DecoderState(tif); \ + int a0; /* reference element */ \ + int lastx = sp->b.rowpixels; /* last element in row */ \ + uint32 BitAcc; /* bit accumulator */ \ + int BitsAvail; /* # valid bits in BitAcc */ \ + int RunLength; /* length of current run */ \ + unsigned char* cp; /* next byte of input data */ \ + unsigned char* ep; /* end of input data */ \ + uint32* pa; /* place to stuff next run */ \ + uint32* thisrun; /* current row's run array */ \ + int EOLcnt; /* # EOL codes recognized */ \ + const unsigned char* bitmap = sp->bitmap; /* input data bit reverser */ \ + const TIFFFaxTabEnt* TabEnt +#define DECLARE_STATE_2D(tif, sp, mod) \ + DECLARE_STATE(tif, sp, mod); \ + int b1; /* next change on prev line */ \ + uint32* pb /* next run in reference line */\ +/* + * Load any state that may be changed during decoding. + */ +#define CACHE_STATE(tif, sp) do { \ + BitAcc = sp->data; \ + BitsAvail = sp->bit; \ + EOLcnt = sp->EOLcnt; \ + cp = (unsigned char*) tif->tif_rawcp; \ + ep = cp + tif->tif_rawcc; \ +} while (0) +/* + * Save state possibly changed during decoding. + */ +#define UNCACHE_STATE(tif, sp) do { \ + sp->bit = BitsAvail; \ + sp->data = BitAcc; \ + sp->EOLcnt = EOLcnt; \ + tif->tif_rawcc -= (tmsize_t)((uint8*) cp - tif->tif_rawcp); \ + tif->tif_rawcp = (uint8*) cp; \ +} while (0) + +/* + * Setup state for decoding a strip. + */ +static int +Fax3PreDecode(TIFF* tif, uint16 s) +{ + Fax3CodecState* sp = DecoderState(tif); + + (void) s; + assert(sp != NULL); + sp->bit = 0; /* force initial read */ + sp->data = 0; + sp->EOLcnt = 0; /* force initial scan for EOL */ + /* + * Decoder assumes lsb-to-msb bit order. Note that we select + * this here rather than in Fax3SetupState so that viewers can + * hold the image open, fiddle with the FillOrder tag value, + * and then re-decode the image. Otherwise they'd need to close + * and open the image to get the state reset. + */ + sp->bitmap = + TIFFGetBitRevTable(tif->tif_dir.td_fillorder != FILLORDER_LSB2MSB); + if (sp->refruns) { /* init reference line to white */ + sp->refruns[0] = (uint32) sp->b.rowpixels; + sp->refruns[1] = 0; + } + sp->line = 0; + return (1); +} + +/* + * Routine for handling various errors/conditions. + * Note how they are "glued into the decoder" by + * overriding the definitions used by the decoder. + */ + +static void +Fax3Unexpected(const char* module, TIFF* tif, uint32 line, uint32 a0) +{ + TIFFErrorExt(tif->tif_clientdata, module, "Bad code word at line %u of %s %u (x %u)", + line, isTiled(tif) ? "tile" : "strip", + (isTiled(tif) ? tif->tif_curtile : tif->tif_curstrip), + a0); +} +#define unexpected(table, a0) Fax3Unexpected(module, tif, sp->line, a0) + +static void +Fax3Extension(const char* module, TIFF* tif, uint32 line, uint32 a0) +{ + TIFFErrorExt(tif->tif_clientdata, module, + "Uncompressed data (not supported) at line %u of %s %u (x %u)", + line, isTiled(tif) ? "tile" : "strip", + (isTiled(tif) ? tif->tif_curtile : tif->tif_curstrip), + a0); +} +#define extension(a0) Fax3Extension(module, tif, sp->line, a0) + +static void +Fax3BadLength(const char* module, TIFF* tif, uint32 line, uint32 a0, uint32 lastx) +{ + TIFFWarningExt(tif->tif_clientdata, module, "%s at line %u of %s %u (got %u, expected %u)", + a0 < lastx ? "Premature EOL" : "Line length mismatch", + line, isTiled(tif) ? "tile" : "strip", + (isTiled(tif) ? tif->tif_curtile : tif->tif_curstrip), + a0, lastx); +} +#define badlength(a0,lastx) Fax3BadLength(module, tif, sp->line, a0, lastx) + +static void +Fax3PrematureEOF(const char* module, TIFF* tif, uint32 line, uint32 a0) +{ + TIFFWarningExt(tif->tif_clientdata, module, "Premature EOF at line %u of %s %u (x %u)", + line, isTiled(tif) ? "tile" : "strip", + (isTiled(tif) ? tif->tif_curtile : tif->tif_curstrip), + a0); +} +#define prematureEOF(a0) Fax3PrematureEOF(module, tif, sp->line, a0) + +#define Nop + +/* + * Decode the requested amount of G3 1D-encoded data. + */ +static int +Fax3Decode1D(TIFF* tif, uint8* buf, tmsize_t occ, uint16 s) +{ + DECLARE_STATE(tif, sp, "Fax3Decode1D"); + (void) s; + if (occ % sp->b.rowbytes) + { + TIFFErrorExt(tif->tif_clientdata, module, "Fractional scanlines cannot be read"); + return (-1); + } + CACHE_STATE(tif, sp); + thisrun = sp->curruns; + while (occ > 0) { + a0 = 0; + RunLength = 0; + pa = thisrun; +#ifdef FAX3_DEBUG + printf("\nBitAcc=%08X, BitsAvail = %d\n", BitAcc, BitsAvail); + printf("-------------------- %d\n", tif->tif_row); + fflush(stdout); +#endif + SYNC_EOL(EOF1D); + EXPAND1D(EOF1Da); + (*sp->fill)(buf, thisrun, pa, lastx); + buf += sp->b.rowbytes; + occ -= sp->b.rowbytes; + sp->line++; + continue; + EOF1D: /* premature EOF */ + CLEANUP_RUNS(); + EOF1Da: /* premature EOF */ + (*sp->fill)(buf, thisrun, pa, lastx); + UNCACHE_STATE(tif, sp); + return (-1); + } + UNCACHE_STATE(tif, sp); + return (1); +} + +#define SWAP(t,a,b) { t x; x = (a); (a) = (b); (b) = x; } +/* + * Decode the requested amount of G3 2D-encoded data. + */ +static int +Fax3Decode2D(TIFF* tif, uint8* buf, tmsize_t occ, uint16 s) +{ + DECLARE_STATE_2D(tif, sp, "Fax3Decode2D"); + int is1D; /* current line is 1d/2d-encoded */ + (void) s; + if (occ % sp->b.rowbytes) + { + TIFFErrorExt(tif->tif_clientdata, module, "Fractional scanlines cannot be read"); + return (-1); + } + CACHE_STATE(tif, sp); + while (occ > 0) { + a0 = 0; + RunLength = 0; + pa = thisrun = sp->curruns; +#ifdef FAX3_DEBUG + printf("\nBitAcc=%08X, BitsAvail = %d EOLcnt = %d", + BitAcc, BitsAvail, EOLcnt); +#endif + SYNC_EOL(EOF2D); + NeedBits8(1, EOF2D); + is1D = GetBits(1); /* 1D/2D-encoding tag bit */ + ClrBits(1); +#ifdef FAX3_DEBUG + printf(" %s\n-------------------- %d\n", + is1D ? "1D" : "2D", tif->tif_row); + fflush(stdout); +#endif + pb = sp->refruns; + b1 = *pb++; + if (is1D) + EXPAND1D(EOF2Da); + else + EXPAND2D(EOF2Da); + (*sp->fill)(buf, thisrun, pa, lastx); + SETVALUE(0); /* imaginary change for reference */ + SWAP(uint32*, sp->curruns, sp->refruns); + buf += sp->b.rowbytes; + occ -= sp->b.rowbytes; + sp->line++; + continue; + EOF2D: /* premature EOF */ + CLEANUP_RUNS(); + EOF2Da: /* premature EOF */ + (*sp->fill)(buf, thisrun, pa, lastx); + UNCACHE_STATE(tif, sp); + return (-1); + } + UNCACHE_STATE(tif, sp); + return (1); +} +#undef SWAP + +/* + * The ZERO & FILL macros must handle spans < 2*sizeof(long) bytes. + * For machines with 64-bit longs this is <16 bytes; otherwise + * this is <8 bytes. We optimize the code here to reflect the + * machine characteristics. + */ +#if SIZEOF_UNSIGNED_LONG == 8 +# define FILL(n, cp) \ + switch (n) { \ + case 15:(cp)[14] = 0xff; case 14:(cp)[13] = 0xff; case 13: (cp)[12] = 0xff;\ + case 12:(cp)[11] = 0xff; case 11:(cp)[10] = 0xff; case 10: (cp)[9] = 0xff;\ + case 9: (cp)[8] = 0xff; case 8: (cp)[7] = 0xff; case 7: (cp)[6] = 0xff;\ + case 6: (cp)[5] = 0xff; case 5: (cp)[4] = 0xff; case 4: (cp)[3] = 0xff;\ + case 3: (cp)[2] = 0xff; case 2: (cp)[1] = 0xff; \ + case 1: (cp)[0] = 0xff; (cp) += (n); case 0: ; \ + } +# define ZERO(n, cp) \ + switch (n) { \ + case 15:(cp)[14] = 0; case 14:(cp)[13] = 0; case 13: (cp)[12] = 0; \ + case 12:(cp)[11] = 0; case 11:(cp)[10] = 0; case 10: (cp)[9] = 0; \ + case 9: (cp)[8] = 0; case 8: (cp)[7] = 0; case 7: (cp)[6] = 0; \ + case 6: (cp)[5] = 0; case 5: (cp)[4] = 0; case 4: (cp)[3] = 0; \ + case 3: (cp)[2] = 0; case 2: (cp)[1] = 0; \ + case 1: (cp)[0] = 0; (cp) += (n); case 0: ; \ + } +#else +# define FILL(n, cp) \ + switch (n) { \ + case 7: (cp)[6] = 0xff; case 6: (cp)[5] = 0xff; case 5: (cp)[4] = 0xff; \ + case 4: (cp)[3] = 0xff; case 3: (cp)[2] = 0xff; case 2: (cp)[1] = 0xff; \ + case 1: (cp)[0] = 0xff; (cp) += (n); case 0: ; \ + } +# define ZERO(n, cp) \ + switch (n) { \ + case 7: (cp)[6] = 0; case 6: (cp)[5] = 0; case 5: (cp)[4] = 0; \ + case 4: (cp)[3] = 0; case 3: (cp)[2] = 0; case 2: (cp)[1] = 0; \ + case 1: (cp)[0] = 0; (cp) += (n); case 0: ; \ + } +#endif + +/* + * Bit-fill a row according to the white/black + * runs generated during G3/G4 decoding. + */ +void +_TIFFFax3fillruns(unsigned char* buf, uint32* runs, uint32* erun, uint32 lastx) +{ + static const unsigned char _fillmasks[] = + { 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc, 0xfe, 0xff }; + unsigned char* cp; + uint32 x, bx, run; + int32 n, nw; + long* lp; + + if ((erun-runs)&1) + *erun++ = 0; + x = 0; + for (; runs < erun; runs += 2) { + run = runs[0]; + if (x+run > lastx || run > lastx ) + run = runs[0] = (uint32) (lastx - x); + if (run) { + cp = buf + (x>>3); + bx = x&7; + if (run > 8-bx) { + if (bx) { /* align to byte boundary */ + *cp++ &= 0xff << (8-bx); + run -= 8-bx; + } + if( (n = run >> 3) != 0 ) { /* multiple bytes to fill */ + if ((n/sizeof (long)) > 1) { + /* + * Align to longword boundary and fill. + */ + for (; n && !isAligned(cp, long); n--) + *cp++ = 0x00; + lp = (long*) cp; + nw = (int32)(n / sizeof (long)); + n -= nw * sizeof (long); + do { + *lp++ = 0L; + } while (--nw); + cp = (unsigned char*) lp; + } + ZERO(n, cp); + run &= 7; + } + if (run) + cp[0] &= 0xff >> run; + } else + cp[0] &= ~(_fillmasks[run]>>bx); + x += runs[0]; + } + run = runs[1]; + if (x+run > lastx || run > lastx ) + run = runs[1] = lastx - x; + if (run) { + cp = buf + (x>>3); + bx = x&7; + if (run > 8-bx) { + if (bx) { /* align to byte boundary */ + *cp++ |= 0xff >> bx; + run -= 8-bx; + } + if( (n = run>>3) != 0 ) { /* multiple bytes to fill */ + if ((n/sizeof (long)) > 1) { + /* + * Align to longword boundary and fill. + */ + for (; n && !isAligned(cp, long); n--) + *cp++ = 0xff; + lp = (long*) cp; + nw = (int32)(n / sizeof (long)); + n -= nw * sizeof (long); + do { + *lp++ = -1L; + } while (--nw); + cp = (unsigned char*) lp; + } + FILL(n, cp); + run &= 7; + } + if (run) + cp[0] |= 0xff00 >> run; + } else + cp[0] |= _fillmasks[run]>>bx; + x += runs[1]; + } + } + assert(x == lastx); +} +#undef ZERO +#undef FILL + +static int +Fax3FixupTags(TIFF* tif) +{ + (void) tif; + return (1); +} + +/* + * Setup G3/G4-related compression/decompression state + * before data is processed. This routine is called once + * per image -- it sets up different state based on whether + * or not decoding or encoding is being done and whether + * 1D- or 2D-encoded data is involved. + */ +static int +Fax3SetupState(TIFF* tif) +{ + static const char module[] = "Fax3SetupState"; + TIFFDirectory* td = &tif->tif_dir; + Fax3BaseState* sp = Fax3State(tif); + int needsRefLine; + Fax3CodecState* dsp = (Fax3CodecState*) Fax3State(tif); + tmsize_t rowbytes; + uint32 rowpixels, nruns; + + if (td->td_bitspersample != 1) { + TIFFErrorExt(tif->tif_clientdata, module, + "Bits/sample must be 1 for Group 3/4 encoding/decoding"); + return (0); + } + /* + * Calculate the scanline/tile widths. + */ + if (isTiled(tif)) { + rowbytes = TIFFTileRowSize(tif); + rowpixels = td->td_tilewidth; + } else { + rowbytes = TIFFScanlineSize(tif); + rowpixels = td->td_imagewidth; + } + sp->rowbytes = rowbytes; + sp->rowpixels = rowpixels; + /* + * Allocate any additional space required for decoding/encoding. + */ + needsRefLine = ( + (sp->groupoptions & GROUP3OPT_2DENCODING) || + td->td_compression == COMPRESSION_CCITTFAX4 + ); + + /* + Assure that allocation computations do not overflow. + + TIFFroundup and TIFFSafeMultiply return zero on integer overflow + */ + dsp->runs=(uint32*) NULL; + nruns = TIFFroundup_32(rowpixels,32); + if (needsRefLine) { + nruns = TIFFSafeMultiply(uint32,nruns,2); + } + if ((nruns == 0) || (TIFFSafeMultiply(uint32,nruns,2) == 0)) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "Row pixels integer overflow (rowpixels %u)", + rowpixels); + return (0); + } + dsp->runs = (uint32*) _TIFFCheckMalloc(tif, + TIFFSafeMultiply(uint32,nruns,2), + sizeof (uint32), + "for Group 3/4 run arrays"); + if (dsp->runs == NULL) + return (0); + memset( dsp->runs, 0, TIFFSafeMultiply(uint32,nruns,2)*sizeof(uint32)); + dsp->curruns = dsp->runs; + if (needsRefLine) + dsp->refruns = dsp->runs + nruns; + else + dsp->refruns = NULL; + if (td->td_compression == COMPRESSION_CCITTFAX3 + && is2DEncoding(dsp)) { /* NB: default is 1D routine */ + tif->tif_decoderow = Fax3Decode2D; + tif->tif_decodestrip = Fax3Decode2D; + tif->tif_decodetile = Fax3Decode2D; + } + + if (needsRefLine) { /* 2d encoding */ + Fax3CodecState* esp = EncoderState(tif); + /* + * 2d encoding requires a scanline + * buffer for the ``reference line''; the + * scanline against which delta encoding + * is referenced. The reference line must + * be initialized to be ``white'' (done elsewhere). + */ + esp->refline = (unsigned char*) _TIFFmalloc(rowbytes); + if (esp->refline == NULL) { + TIFFErrorExt(tif->tif_clientdata, module, + "No space for Group 3/4 reference line"); + return (0); + } + } else /* 1d encoding */ + EncoderState(tif)->refline = NULL; + + return (1); +} + +/* + * CCITT Group 3 FAX Encoding. + */ + +#define Fax3FlushBits(tif, sp) { \ + if ((tif)->tif_rawcc >= (tif)->tif_rawdatasize) \ + (void) TIFFFlushData1(tif); \ + *(tif)->tif_rawcp++ = (uint8) (sp)->data; \ + (tif)->tif_rawcc++; \ + (sp)->data = 0, (sp)->bit = 8; \ +} +#define _FlushBits(tif) { \ + if ((tif)->tif_rawcc >= (tif)->tif_rawdatasize) \ + (void) TIFFFlushData1(tif); \ + *(tif)->tif_rawcp++ = (uint8) data; \ + (tif)->tif_rawcc++; \ + data = 0, bit = 8; \ +} +static const int _msbmask[9] = + { 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; +#define _PutBits(tif, bits, length) { \ + while (length > bit) { \ + data |= bits >> (length - bit); \ + length -= bit; \ + _FlushBits(tif); \ + } \ + assert( length < 9 ); \ + data |= (bits & _msbmask[length]) << (bit - length); \ + bit -= length; \ + if (bit == 0) \ + _FlushBits(tif); \ +} + +/* + * Write a variable-length bit-value to + * the output stream. Values are + * assumed to be at most 16 bits. + */ +static void +Fax3PutBits(TIFF* tif, unsigned int bits, unsigned int length) +{ + Fax3CodecState* sp = EncoderState(tif); + unsigned int bit = sp->bit; + int data = sp->data; + + _PutBits(tif, bits, length); + + sp->data = data; + sp->bit = bit; +} + +/* + * Write a code to the output stream. + */ +#define putcode(tif, te) Fax3PutBits(tif, (te)->code, (te)->length) + +#ifdef FAX3_DEBUG +#define DEBUG_COLOR(w) (tab == TIFFFaxWhiteCodes ? w "W" : w "B") +#define DEBUG_PRINT(what,len) { \ + int t; \ + printf("%08X/%-2d: %s%5d\t", data, bit, DEBUG_COLOR(what), len); \ + for (t = length-1; t >= 0; t--) \ + putchar(code & (1<bit; + int data = sp->data; + unsigned int code, length; + + while (span >= 2624) { + const tableentry* te = &tab[63 + (2560>>6)]; + code = te->code, length = te->length; +#ifdef FAX3_DEBUG + DEBUG_PRINT("MakeUp", te->runlen); +#endif + _PutBits(tif, code, length); + span -= te->runlen; + } + if (span >= 64) { + const tableentry* te = &tab[63 + (span>>6)]; + assert(te->runlen == 64*(span>>6)); + code = te->code, length = te->length; +#ifdef FAX3_DEBUG + DEBUG_PRINT("MakeUp", te->runlen); +#endif + _PutBits(tif, code, length); + span -= te->runlen; + } + code = tab[span].code, length = tab[span].length; +#ifdef FAX3_DEBUG + DEBUG_PRINT(" Term", tab[span].runlen); +#endif + _PutBits(tif, code, length); + + sp->data = data; + sp->bit = bit; +} + +/* + * Write an EOL code to the output stream. The zero-fill + * logic for byte-aligning encoded scanlines is handled + * here. We also handle writing the tag bit for the next + * scanline when doing 2d encoding. + */ +static void +Fax3PutEOL(TIFF* tif) +{ + Fax3CodecState* sp = EncoderState(tif); + unsigned int bit = sp->bit; + int data = sp->data; + unsigned int code, length, tparm; + + if (sp->b.groupoptions & GROUP3OPT_FILLBITS) { + /* + * Force bit alignment so EOL will terminate on + * a byte boundary. That is, force the bit alignment + * to 16-12 = 4 before putting out the EOL code. + */ + int align = 8 - 4; + if (align != sp->bit) { + if (align > sp->bit) + align = sp->bit + (8 - align); + else + align = sp->bit - align; + code = 0; + tparm=align; + _PutBits(tif, 0, tparm); + } + } + code = EOL, length = 12; + if (is2DEncoding(sp)) + code = (code<<1) | (sp->tag == G3_1D), length++; + _PutBits(tif, code, length); + + sp->data = data; + sp->bit = bit; +} + +/* + * Reset encoding state at the start of a strip. + */ +static int +Fax3PreEncode(TIFF* tif, uint16 s) +{ + Fax3CodecState* sp = EncoderState(tif); + + (void) s; + assert(sp != NULL); + sp->bit = 8; + sp->data = 0; + sp->tag = G3_1D; + /* + * This is necessary for Group 4; otherwise it isn't + * needed because the first scanline of each strip ends + * up being copied into the refline. + */ + if (sp->refline) + _TIFFmemset(sp->refline, 0x00, sp->b.rowbytes); + if (is2DEncoding(sp)) { + float res = tif->tif_dir.td_yresolution; + /* + * The CCITT spec says that when doing 2d encoding, you + * should only do it on K consecutive scanlines, where K + * depends on the resolution of the image being encoded + * (2 for <= 200 lpi, 4 for > 200 lpi). Since the directory + * code initializes td_yresolution to 0, this code will + * select a K of 2 unless the YResolution tag is set + * appropriately. (Note also that we fudge a little here + * and use 150 lpi to avoid problems with units conversion.) + */ + if (tif->tif_dir.td_resolutionunit == RESUNIT_CENTIMETER) + res *= 2.54f; /* convert to inches */ + sp->maxk = (res > 150 ? 4 : 2); + sp->k = sp->maxk-1; + } else + sp->k = sp->maxk = 0; + sp->line = 0; + return (1); +} + +static const unsigned char zeroruns[256] = { + 8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4, /* 0x00 - 0x0f */ + 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, /* 0x10 - 0x1f */ + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, /* 0x20 - 0x2f */ + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, /* 0x30 - 0x3f */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 0x40 - 0x4f */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 0x50 - 0x5f */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 0x60 - 0x6f */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 0x70 - 0x7f */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x80 - 0x8f */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x90 - 0x9f */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xa0 - 0xaf */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xb0 - 0xbf */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xc0 - 0xcf */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xd0 - 0xdf */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xe0 - 0xef */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xf0 - 0xff */ +}; +static const unsigned char oneruns[256] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x00 - 0x0f */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x10 - 0x1f */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x20 - 0x2f */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x30 - 0x3f */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x40 - 0x4f */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x50 - 0x5f */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x60 - 0x6f */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x70 - 0x7f */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 0x80 - 0x8f */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 0x90 - 0x9f */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 0xa0 - 0xaf */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 0xb0 - 0xbf */ + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, /* 0xc0 - 0xcf */ + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, /* 0xd0 - 0xdf */ + 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, /* 0xe0 - 0xef */ + 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 6, 6, 7, 8, /* 0xf0 - 0xff */ +}; + +/* + * On certain systems it pays to inline + * the routines that find pixel spans. + */ +#ifdef VAXC +static int32 find0span(unsigned char*, int32, int32); +static int32 find1span(unsigned char*, int32, int32); +#pragma inline(find0span,find1span) +#endif + +/* + * Find a span of ones or zeros using the supplied + * table. The ``base'' of the bit string is supplied + * along with the start+end bit indices. + */ +inline static int32 +find0span(unsigned char* bp, int32 bs, int32 be) +{ + int32 bits = be - bs; + int32 n, span; + + bp += bs>>3; + /* + * Check partial byte on lhs. + */ + if (bits > 0 && (n = (bs & 7))) { + span = zeroruns[(*bp << n) & 0xff]; + if (span > 8-n) /* table value too generous */ + span = 8-n; + if (span > bits) /* constrain span to bit range */ + span = bits; + if (n+span < 8) /* doesn't extend to edge of byte */ + return (span); + bits -= span; + bp++; + } else + span = 0; + if (bits >= (int32)(2 * 8 * sizeof(long))) { + long* lp; + /* + * Align to longword boundary and check longwords. + */ + while (!isAligned(bp, long)) { + if (*bp != 0x00) + return (span + zeroruns[*bp]); + span += 8, bits -= 8; + bp++; + } + lp = (long*) bp; + while ((bits >= (int32)(8 * sizeof(long))) && (0 == *lp)) { + span += 8*sizeof (long), bits -= 8*sizeof (long); + lp++; + } + bp = (unsigned char*) lp; + } + /* + * Scan full bytes for all 0's. + */ + while (bits >= 8) { + if (*bp != 0x00) /* end of run */ + return (span + zeroruns[*bp]); + span += 8, bits -= 8; + bp++; + } + /* + * Check partial byte on rhs. + */ + if (bits > 0) { + n = zeroruns[*bp]; + span += (n > bits ? bits : n); + } + return (span); +} + +inline static int32 +find1span(unsigned char* bp, int32 bs, int32 be) +{ + int32 bits = be - bs; + int32 n, span; + + bp += bs>>3; + /* + * Check partial byte on lhs. + */ + if (bits > 0 && (n = (bs & 7))) { + span = oneruns[(*bp << n) & 0xff]; + if (span > 8-n) /* table value too generous */ + span = 8-n; + if (span > bits) /* constrain span to bit range */ + span = bits; + if (n+span < 8) /* doesn't extend to edge of byte */ + return (span); + bits -= span; + bp++; + } else + span = 0; + if (bits >= (int32)(2 * 8 * sizeof(long))) { + long* lp; + /* + * Align to longword boundary and check longwords. + */ + while (!isAligned(bp, long)) { + if (*bp != 0xff) + return (span + oneruns[*bp]); + span += 8, bits -= 8; + bp++; + } + lp = (long*) bp; + while ((bits >= (int32)(8 * sizeof(long))) && (~0 == *lp)) { + span += 8*sizeof (long), bits -= 8*sizeof (long); + lp++; + } + bp = (unsigned char*) lp; + } + /* + * Scan full bytes for all 1's. + */ + while (bits >= 8) { + if (*bp != 0xff) /* end of run */ + return (span + oneruns[*bp]); + span += 8, bits -= 8; + bp++; + } + /* + * Check partial byte on rhs. + */ + if (bits > 0) { + n = oneruns[*bp]; + span += (n > bits ? bits : n); + } + return (span); +} + +/* + * Return the offset of the next bit in the range + * [bs..be] that is different from the specified + * color. The end, be, is returned if no such bit + * exists. + */ +#define finddiff(_cp, _bs, _be, _color) \ + (_bs + (_color ? find1span(_cp,_bs,_be) : find0span(_cp,_bs,_be))) +/* + * Like finddiff, but also check the starting bit + * against the end in case start > end. + */ +#define finddiff2(_cp, _bs, _be, _color) \ + (_bs < _be ? finddiff(_cp,_bs,_be,_color) : _be) + +/* + * 1d-encode a row of pixels. The encoding is + * a sequence of all-white or all-black spans + * of pixels encoded with Huffman codes. + */ +static int +Fax3Encode1DRow(TIFF* tif, unsigned char* bp, uint32 bits) +{ + Fax3CodecState* sp = EncoderState(tif); + int32 span; + uint32 bs = 0; + + for (;;) { + span = find0span(bp, bs, bits); /* white span */ + putspan(tif, span, TIFFFaxWhiteCodes); + bs += span; + if (bs >= bits) + break; + span = find1span(bp, bs, bits); /* black span */ + putspan(tif, span, TIFFFaxBlackCodes); + bs += span; + if (bs >= bits) + break; + } + if (sp->b.mode & (FAXMODE_BYTEALIGN|FAXMODE_WORDALIGN)) { + if (sp->bit != 8) /* byte-align */ + Fax3FlushBits(tif, sp); + if ((sp->b.mode&FAXMODE_WORDALIGN) && + !isAligned(tif->tif_rawcp, uint16)) + Fax3FlushBits(tif, sp); + } + return (1); +} + +static const tableentry horizcode = + { 3, 0x1, 0 }; /* 001 */ +static const tableentry passcode = + { 4, 0x1, 0 }; /* 0001 */ +static const tableentry vcodes[7] = { + { 7, 0x03, 0 }, /* 0000 011 */ + { 6, 0x03, 0 }, /* 0000 11 */ + { 3, 0x03, 0 }, /* 011 */ + { 1, 0x1, 0 }, /* 1 */ + { 3, 0x2, 0 }, /* 010 */ + { 6, 0x02, 0 }, /* 0000 10 */ + { 7, 0x02, 0 } /* 0000 010 */ +}; + +/* + * 2d-encode a row of pixels. Consult the CCITT + * documentation for the algorithm. + */ +static int +Fax3Encode2DRow(TIFF* tif, unsigned char* bp, unsigned char* rp, uint32 bits) +{ +#define PIXEL(buf,ix) ((((buf)[(ix)>>3]) >> (7-((ix)&7))) & 1) + uint32 a0 = 0; + uint32 a1 = (PIXEL(bp, 0) != 0 ? 0 : finddiff(bp, 0, bits, 0)); + uint32 b1 = (PIXEL(rp, 0) != 0 ? 0 : finddiff(rp, 0, bits, 0)); + uint32 a2, b2; + + for (;;) { + b2 = finddiff2(rp, b1, bits, PIXEL(rp,b1)); + if (b2 >= a1) { + int32 d = b1 - a1; + if (!(-3 <= d && d <= 3)) { /* horizontal mode */ + a2 = finddiff2(bp, a1, bits, PIXEL(bp,a1)); + putcode(tif, &horizcode); + if (a0+a1 == 0 || PIXEL(bp, a0) == 0) { + putspan(tif, a1-a0, TIFFFaxWhiteCodes); + putspan(tif, a2-a1, TIFFFaxBlackCodes); + } else { + putspan(tif, a1-a0, TIFFFaxBlackCodes); + putspan(tif, a2-a1, TIFFFaxWhiteCodes); + } + a0 = a2; + } else { /* vertical mode */ + putcode(tif, &vcodes[d+3]); + a0 = a1; + } + } else { /* pass mode */ + putcode(tif, &passcode); + a0 = b2; + } + if (a0 >= bits) + break; + a1 = finddiff(bp, a0, bits, PIXEL(bp,a0)); + b1 = finddiff(rp, a0, bits, !PIXEL(bp,a0)); + b1 = finddiff(rp, b1, bits, PIXEL(bp,a0)); + } + return (1); +#undef PIXEL +} + +/* + * Encode a buffer of pixels. + */ +static int +Fax3Encode(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + static const char module[] = "Fax3Encode"; + Fax3CodecState* sp = EncoderState(tif); + (void) s; + if (cc % sp->b.rowbytes) + { + TIFFErrorExt(tif->tif_clientdata, module, "Fractional scanlines cannot be written"); + return (0); + } + while (cc > 0) { + if ((sp->b.mode & FAXMODE_NOEOL) == 0) + Fax3PutEOL(tif); + if (is2DEncoding(sp)) { + if (sp->tag == G3_1D) { + if (!Fax3Encode1DRow(tif, bp, sp->b.rowpixels)) + return (0); + sp->tag = G3_2D; + } else { + if (!Fax3Encode2DRow(tif, bp, sp->refline, + sp->b.rowpixels)) + return (0); + sp->k--; + } + if (sp->k == 0) { + sp->tag = G3_1D; + sp->k = sp->maxk-1; + } else + _TIFFmemcpy(sp->refline, bp, sp->b.rowbytes); + } else { + if (!Fax3Encode1DRow(tif, bp, sp->b.rowpixels)) + return (0); + } + bp += sp->b.rowbytes; + cc -= sp->b.rowbytes; + } + return (1); +} + +static int +Fax3PostEncode(TIFF* tif) +{ + Fax3CodecState* sp = EncoderState(tif); + + if (sp->bit != 8) + Fax3FlushBits(tif, sp); + return (1); +} + +static void +Fax3Close(TIFF* tif) +{ + if ((Fax3State(tif)->mode & FAXMODE_NORTC) == 0) { + Fax3CodecState* sp = EncoderState(tif); + unsigned int code = EOL; + unsigned int length = 12; + int i; + + if (is2DEncoding(sp)) + code = (code<<1) | (sp->tag == G3_1D), length++; + for (i = 0; i < 6; i++) + Fax3PutBits(tif, code, length); + Fax3FlushBits(tif, sp); + } +} + +static void +Fax3Cleanup(TIFF* tif) +{ + Fax3CodecState* sp = DecoderState(tif); + + assert(sp != 0); + + tif->tif_tagmethods.vgetfield = sp->b.vgetparent; + tif->tif_tagmethods.vsetfield = sp->b.vsetparent; + tif->tif_tagmethods.printdir = sp->b.printdir; + + if (sp->runs) + _TIFFfree(sp->runs); + if (sp->refline) + _TIFFfree(sp->refline); + + _TIFFfree(tif->tif_data); + tif->tif_data = NULL; + + _TIFFSetDefaultCompressionState(tif); +} + +#define FIELD_BADFAXLINES (FIELD_CODEC+0) +#define FIELD_CLEANFAXDATA (FIELD_CODEC+1) +#define FIELD_BADFAXRUN (FIELD_CODEC+2) + +#define FIELD_OPTIONS (FIELD_CODEC+7) + +static const TIFFField faxFields[] = { + { TIFFTAG_FAXMODE, 0, 0, TIFF_ANY, 0, TIFF_SETGET_INT, TIFF_SETGET_UNDEFINED, FIELD_PSEUDO, FALSE, FALSE, "FaxMode", NULL }, + { TIFFTAG_FAXFILLFUNC, 0, 0, TIFF_ANY, 0, TIFF_SETGET_OTHER, TIFF_SETGET_UNDEFINED, FIELD_PSEUDO, FALSE, FALSE, "FaxFillFunc", NULL }, + { TIFFTAG_BADFAXLINES, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UINT32, FIELD_BADFAXLINES, TRUE, FALSE, "BadFaxLines", NULL }, + { TIFFTAG_CLEANFAXDATA, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UINT16, FIELD_CLEANFAXDATA, TRUE, FALSE, "CleanFaxData", NULL }, + { TIFFTAG_CONSECUTIVEBADFAXLINES, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UINT32, FIELD_BADFAXRUN, TRUE, FALSE, "ConsecutiveBadFaxLines", NULL }}; +static const TIFFField fax3Fields[] = { + { TIFFTAG_GROUP3OPTIONS, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UINT32, FIELD_OPTIONS, FALSE, FALSE, "Group3Options", NULL }, +}; +static const TIFFField fax4Fields[] = { + { TIFFTAG_GROUP4OPTIONS, 1, 1, TIFF_LONG, 0, TIFF_SETGET_UINT32, TIFF_SETGET_UINT32, FIELD_OPTIONS, FALSE, FALSE, "Group4Options", NULL }, +}; + +static int +Fax3VSetField(TIFF* tif, uint32 tag, va_list ap) +{ + Fax3BaseState* sp = Fax3State(tif); + const TIFFField* fip; + + assert(sp != 0); + assert(sp->vsetparent != 0); + + switch (tag) { + case TIFFTAG_FAXMODE: + sp->mode = (int) va_arg(ap, int); + return 1; /* NB: pseudo tag */ + case TIFFTAG_FAXFILLFUNC: + DecoderState(tif)->fill = va_arg(ap, TIFFFaxFillFunc); + return 1; /* NB: pseudo tag */ + case TIFFTAG_GROUP3OPTIONS: + /* XXX: avoid reading options if compression mismatches. */ + if (tif->tif_dir.td_compression == COMPRESSION_CCITTFAX3) + sp->groupoptions = (uint32) va_arg(ap, uint32); + break; + case TIFFTAG_GROUP4OPTIONS: + /* XXX: avoid reading options if compression mismatches. */ + if (tif->tif_dir.td_compression == COMPRESSION_CCITTFAX4) + sp->groupoptions = (uint32) va_arg(ap, uint32); + break; + case TIFFTAG_BADFAXLINES: + sp->badfaxlines = (uint32) va_arg(ap, uint32); + break; + case TIFFTAG_CLEANFAXDATA: + sp->cleanfaxdata = (uint16) va_arg(ap, uint16_vap); + break; + case TIFFTAG_CONSECUTIVEBADFAXLINES: + sp->badfaxrun = (uint32) va_arg(ap, uint32); + break; + default: + return (*sp->vsetparent)(tif, tag, ap); + } + + if ((fip = TIFFFieldWithTag(tif, tag))) + TIFFSetFieldBit(tif, fip->field_bit); + else + return 0; + + tif->tif_flags |= TIFF_DIRTYDIRECT; + return 1; +} + +static int +Fax3VGetField(TIFF* tif, uint32 tag, va_list ap) +{ + Fax3BaseState* sp = Fax3State(tif); + + assert(sp != 0); + + switch (tag) { + case TIFFTAG_FAXMODE: + *va_arg(ap, int*) = sp->mode; + break; + case TIFFTAG_FAXFILLFUNC: + *va_arg(ap, TIFFFaxFillFunc*) = DecoderState(tif)->fill; + break; + case TIFFTAG_GROUP3OPTIONS: + case TIFFTAG_GROUP4OPTIONS: + *va_arg(ap, uint32*) = sp->groupoptions; + break; + case TIFFTAG_BADFAXLINES: + *va_arg(ap, uint32*) = sp->badfaxlines; + break; + case TIFFTAG_CLEANFAXDATA: + *va_arg(ap, uint16*) = sp->cleanfaxdata; + break; + case TIFFTAG_CONSECUTIVEBADFAXLINES: + *va_arg(ap, uint32*) = sp->badfaxrun; + break; + default: + return (*sp->vgetparent)(tif, tag, ap); + } + return (1); +} + +static void +Fax3PrintDir(TIFF* tif, FILE* fd, long flags) +{ + Fax3BaseState* sp = Fax3State(tif); + + assert(sp != 0); + + (void) flags; + if (TIFFFieldSet(tif,FIELD_OPTIONS)) { + const char* sep = " "; + if (tif->tif_dir.td_compression == COMPRESSION_CCITTFAX4) { + fprintf(fd, " Group 4 Options:"); + if (sp->groupoptions & GROUP4OPT_UNCOMPRESSED) + fprintf(fd, "%suncompressed data", sep); + } else { + + fprintf(fd, " Group 3 Options:"); + if (sp->groupoptions & GROUP3OPT_2DENCODING) + fprintf(fd, "%s2-d encoding", sep), sep = "+"; + if (sp->groupoptions & GROUP3OPT_FILLBITS) + fprintf(fd, "%sEOL padding", sep), sep = "+"; + if (sp->groupoptions & GROUP3OPT_UNCOMPRESSED) + fprintf(fd, "%suncompressed data", sep); + } + fprintf(fd, " (%lu = 0x%lx)\n", + (unsigned long) sp->groupoptions, + (unsigned long) sp->groupoptions); + } + if (TIFFFieldSet(tif,FIELD_CLEANFAXDATA)) { + fprintf(fd, " Fax Data:"); + switch (sp->cleanfaxdata) { + case CLEANFAXDATA_CLEAN: + fprintf(fd, " clean"); + break; + case CLEANFAXDATA_REGENERATED: + fprintf(fd, " receiver regenerated"); + break; + case CLEANFAXDATA_UNCLEAN: + fprintf(fd, " uncorrected errors"); + break; + } + fprintf(fd, " (%u = 0x%x)\n", + sp->cleanfaxdata, sp->cleanfaxdata); + } + if (TIFFFieldSet(tif,FIELD_BADFAXLINES)) + fprintf(fd, " Bad Fax Lines: %lu\n", + (unsigned long) sp->badfaxlines); + if (TIFFFieldSet(tif,FIELD_BADFAXRUN)) + fprintf(fd, " Consecutive Bad Fax Lines: %lu\n", + (unsigned long) sp->badfaxrun); + if (sp->printdir) + (*sp->printdir)(tif, fd, flags); +} + +static int +InitCCITTFax3(TIFF* tif) +{ + static const char module[] = "InitCCITTFax3"; + Fax3BaseState* sp; + + /* + * Merge codec-specific tag information. + */ + if (!_TIFFMergeFields(tif, faxFields, TIFFArrayCount(faxFields))) { + TIFFErrorExt(tif->tif_clientdata, "InitCCITTFax3", + "Merging common CCITT Fax codec-specific tags failed"); + return 0; + } + + /* + * Allocate state block so tag methods have storage to record values. + */ + tif->tif_data = (uint8*) + _TIFFmalloc(sizeof (Fax3CodecState)); + + if (tif->tif_data == NULL) { + TIFFErrorExt(tif->tif_clientdata, module, + "No space for state block"); + return (0); + } + + sp = Fax3State(tif); + sp->rw_mode = tif->tif_mode; + + /* + * Override parent get/set field methods. + */ + sp->vgetparent = tif->tif_tagmethods.vgetfield; + tif->tif_tagmethods.vgetfield = Fax3VGetField; /* hook for codec tags */ + sp->vsetparent = tif->tif_tagmethods.vsetfield; + tif->tif_tagmethods.vsetfield = Fax3VSetField; /* hook for codec tags */ + sp->printdir = tif->tif_tagmethods.printdir; + tif->tif_tagmethods.printdir = Fax3PrintDir; /* hook for codec tags */ + sp->groupoptions = 0; + + if (sp->rw_mode == O_RDONLY) /* FIXME: improve for in place update */ + tif->tif_flags |= TIFF_NOBITREV; /* decoder does bit reversal */ + DecoderState(tif)->runs = NULL; + TIFFSetField(tif, TIFFTAG_FAXFILLFUNC, _TIFFFax3fillruns); + EncoderState(tif)->refline = NULL; + + /* + * Install codec methods. + */ + tif->tif_fixuptags = Fax3FixupTags; + tif->tif_setupdecode = Fax3SetupState; + tif->tif_predecode = Fax3PreDecode; + tif->tif_decoderow = Fax3Decode1D; + tif->tif_decodestrip = Fax3Decode1D; + tif->tif_decodetile = Fax3Decode1D; + tif->tif_setupencode = Fax3SetupState; + tif->tif_preencode = Fax3PreEncode; + tif->tif_postencode = Fax3PostEncode; + tif->tif_encoderow = Fax3Encode; + tif->tif_encodestrip = Fax3Encode; + tif->tif_encodetile = Fax3Encode; + tif->tif_close = Fax3Close; + tif->tif_cleanup = Fax3Cleanup; + + return (1); +} + +int +TIFFInitCCITTFax3(TIFF* tif, int scheme) +{ + (void) scheme; + if (InitCCITTFax3(tif)) { + /* + * Merge codec-specific tag information. + */ + if (!_TIFFMergeFields(tif, fax3Fields, + TIFFArrayCount(fax3Fields))) { + TIFFErrorExt(tif->tif_clientdata, "TIFFInitCCITTFax3", + "Merging CCITT Fax 3 codec-specific tags failed"); + return 0; + } + + /* + * The default format is Class/F-style w/o RTC. + */ + return TIFFSetField(tif, TIFFTAG_FAXMODE, FAXMODE_CLASSF); + } else + return 01; +} + +/* + * CCITT Group 4 (T.6) Facsimile-compatible + * Compression Scheme Support. + */ + +#define SWAP(t,a,b) { t x; x = (a); (a) = (b); (b) = x; } +/* + * Decode the requested amount of G4-encoded data. + */ +static int +Fax4Decode(TIFF* tif, uint8* buf, tmsize_t occ, uint16 s) +{ + DECLARE_STATE_2D(tif, sp, "Fax4Decode"); + (void) s; + if (occ % sp->b.rowbytes) + { + TIFFErrorExt(tif->tif_clientdata, module, "Fractional scanlines cannot be read"); + return (-1); + } + CACHE_STATE(tif, sp); + while (occ > 0) { + a0 = 0; + RunLength = 0; + pa = thisrun = sp->curruns; + pb = sp->refruns; + b1 = *pb++; +#ifdef FAX3_DEBUG + printf("\nBitAcc=%08X, BitsAvail = %d\n", BitAcc, BitsAvail); + printf("-------------------- %d\n", tif->tif_row); + fflush(stdout); +#endif + EXPAND2D(EOFG4); + if (EOLcnt) + goto EOFG4; + (*sp->fill)(buf, thisrun, pa, lastx); + SETVALUE(0); /* imaginary change for reference */ + SWAP(uint32*, sp->curruns, sp->refruns); + buf += sp->b.rowbytes; + occ -= sp->b.rowbytes; + sp->line++; + continue; + EOFG4: + NeedBits16( 13, BADG4 ); + BADG4: +#ifdef FAX3_DEBUG + if( GetBits(13) != 0x1001 ) + fputs( "Bad EOFB\n", stderr ); +#endif + ClrBits( 13 ); + (*sp->fill)(buf, thisrun, pa, lastx); + UNCACHE_STATE(tif, sp); + return ( sp->line ? 1 : -1); /* don't error on badly-terminated strips */ + } + UNCACHE_STATE(tif, sp); + return (1); +} +#undef SWAP + +/* + * Encode the requested amount of data. + */ +static int +Fax4Encode(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + static const char module[] = "Fax4Encode"; + Fax3CodecState *sp = EncoderState(tif); + (void) s; + if (cc % sp->b.rowbytes) + { + TIFFErrorExt(tif->tif_clientdata, module, "Fractional scanlines cannot be written"); + return (0); + } + while (cc > 0) { + if (!Fax3Encode2DRow(tif, bp, sp->refline, sp->b.rowpixels)) + return (0); + _TIFFmemcpy(sp->refline, bp, sp->b.rowbytes); + bp += sp->b.rowbytes; + cc -= sp->b.rowbytes; + } + return (1); +} + +static int +Fax4PostEncode(TIFF* tif) +{ + Fax3CodecState *sp = EncoderState(tif); + + /* terminate strip w/ EOFB */ + Fax3PutBits(tif, EOL, 12); + Fax3PutBits(tif, EOL, 12); + if (sp->bit != 8) + Fax3FlushBits(tif, sp); + return (1); +} + +int +TIFFInitCCITTFax4(TIFF* tif, int scheme) +{ + (void) scheme; + if (InitCCITTFax3(tif)) { /* reuse G3 support */ + /* + * Merge codec-specific tag information. + */ + if (!_TIFFMergeFields(tif, fax4Fields, + TIFFArrayCount(fax4Fields))) { + TIFFErrorExt(tif->tif_clientdata, "TIFFInitCCITTFax4", + "Merging CCITT Fax 4 codec-specific tags failed"); + return 0; + } + + tif->tif_decoderow = Fax4Decode; + tif->tif_decodestrip = Fax4Decode; + tif->tif_decodetile = Fax4Decode; + tif->tif_encoderow = Fax4Encode; + tif->tif_encodestrip = Fax4Encode; + tif->tif_encodetile = Fax4Encode; + tif->tif_postencode = Fax4PostEncode; + /* + * Suppress RTC at the end of each strip. + */ + return TIFFSetField(tif, TIFFTAG_FAXMODE, FAXMODE_NORTC); + } else + return (0); +} + +/* + * CCITT Group 3 1-D Modified Huffman RLE Compression Support. + * (Compression algorithms 2 and 32771) + */ + +/* + * Decode the requested amount of RLE-encoded data. + */ +static int +Fax3DecodeRLE(TIFF* tif, uint8* buf, tmsize_t occ, uint16 s) +{ + DECLARE_STATE(tif, sp, "Fax3DecodeRLE"); + int mode = sp->b.mode; + (void) s; + if (occ % sp->b.rowbytes) + { + TIFFErrorExt(tif->tif_clientdata, module, "Fractional scanlines cannot be read"); + return (-1); + } + CACHE_STATE(tif, sp); + thisrun = sp->curruns; + while (occ > 0) { + a0 = 0; + RunLength = 0; + pa = thisrun; +#ifdef FAX3_DEBUG + printf("\nBitAcc=%08X, BitsAvail = %d\n", BitAcc, BitsAvail); + printf("-------------------- %d\n", tif->tif_row); + fflush(stdout); +#endif + EXPAND1D(EOFRLE); + (*sp->fill)(buf, thisrun, pa, lastx); + /* + * Cleanup at the end of the row. + */ + if (mode & FAXMODE_BYTEALIGN) { + int n = BitsAvail - (BitsAvail &~ 7); + ClrBits(n); + } else if (mode & FAXMODE_WORDALIGN) { + int n = BitsAvail - (BitsAvail &~ 15); + ClrBits(n); + if (BitsAvail == 0 && !isAligned(cp, uint16)) + cp++; + } + buf += sp->b.rowbytes; + occ -= sp->b.rowbytes; + sp->line++; + continue; + EOFRLE: /* premature EOF */ + (*sp->fill)(buf, thisrun, pa, lastx); + UNCACHE_STATE(tif, sp); + return (-1); + } + UNCACHE_STATE(tif, sp); + return (1); +} + +int +TIFFInitCCITTRLE(TIFF* tif, int scheme) +{ + (void) scheme; + if (InitCCITTFax3(tif)) { /* reuse G3 support */ + tif->tif_decoderow = Fax3DecodeRLE; + tif->tif_decodestrip = Fax3DecodeRLE; + tif->tif_decodetile = Fax3DecodeRLE; + /* + * Suppress RTC+EOLs when encoding and byte-align data. + */ + return TIFFSetField(tif, TIFFTAG_FAXMODE, + FAXMODE_NORTC|FAXMODE_NOEOL|FAXMODE_BYTEALIGN); + } else + return (0); +} + +int +TIFFInitCCITTRLEW(TIFF* tif, int scheme) +{ + (void) scheme; + if (InitCCITTFax3(tif)) { /* reuse G3 support */ + tif->tif_decoderow = Fax3DecodeRLE; + tif->tif_decodestrip = Fax3DecodeRLE; + tif->tif_decodetile = Fax3DecodeRLE; + /* + * Suppress RTC+EOLs when encoding and word-align data. + */ + return TIFFSetField(tif, TIFFTAG_FAXMODE, + FAXMODE_NORTC|FAXMODE_NOEOL|FAXMODE_WORDALIGN); + } else + return (0); +} +#endif /* CCITT_SUPPORT */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3.h b/src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3.h new file mode 100644 index 000000000..b0f46c9a4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3.h @@ -0,0 +1,538 @@ +/* $Id: tif_fax3.h,v 1.9 2011-03-10 20:23:07 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1990-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _FAX3_ +#define _FAX3_ +/* + * TIFF Library. + * + * CCITT Group 3 (T.4) and Group 4 (T.6) Decompression Support. + * + * Decoder support is derived, with permission, from the code + * in Frank Cringle's viewfax program; + * Copyright (C) 1990, 1995 Frank D. Cringle. + */ +#include "tiff.h" + +/* + * To override the default routine used to image decoded + * spans one can use the pseduo tag TIFFTAG_FAXFILLFUNC. + * The routine must have the type signature given below; + * for example: + * + * fillruns(unsigned char* buf, uint32* runs, uint32* erun, uint32 lastx) + * + * where buf is place to set the bits, runs is the array of b&w run + * lengths (white then black), erun is the last run in the array, and + * lastx is the width of the row in pixels. Fill routines can assume + * the run array has room for at least lastx runs and can overwrite + * data in the run array as needed (e.g. to append zero runs to bring + * the count up to a nice multiple). + */ +typedef void (*TIFFFaxFillFunc)(unsigned char*, uint32*, uint32*, uint32); + +/* + * The default run filler; made external for other decoders. + */ +#if defined(__cplusplus) +extern "C" { +#endif +extern void _TIFFFax3fillruns(unsigned char*, uint32*, uint32*, uint32); +#if defined(__cplusplus) +} +#endif + + +/* finite state machine codes */ +#define S_Null 0 +#define S_Pass 1 +#define S_Horiz 2 +#define S_V0 3 +#define S_VR 4 +#define S_VL 5 +#define S_Ext 6 +#define S_TermW 7 +#define S_TermB 8 +#define S_MakeUpW 9 +#define S_MakeUpB 10 +#define S_MakeUp 11 +#define S_EOL 12 + +typedef struct { /* state table entry */ + unsigned char State; /* see above */ + unsigned char Width; /* width of code in bits */ + uint32 Param; /* unsigned 32-bit run length in bits */ +} TIFFFaxTabEnt; + +extern const TIFFFaxTabEnt TIFFFaxMainTable[]; +extern const TIFFFaxTabEnt TIFFFaxWhiteTable[]; +extern const TIFFFaxTabEnt TIFFFaxBlackTable[]; + +/* + * The following macros define the majority of the G3/G4 decoder + * algorithm using the state tables defined elsewhere. To build + * a decoder you need some setup code and some glue code. Note + * that you may also need/want to change the way the NeedBits* + * macros get input data if, for example, you know the data to be + * decoded is properly aligned and oriented (doing so before running + * the decoder can be a big performance win). + * + * Consult the decoder in the TIFF library for an idea of what you + * need to define and setup to make use of these definitions. + * + * NB: to enable a debugging version of these macros define FAX3_DEBUG + * before including this file. Trace output goes to stdout. + */ + +#ifndef EndOfData +#define EndOfData() (cp >= ep) +#endif +/* + * Need <=8 or <=16 bits of input data. Unlike viewfax we + * cannot use/assume a word-aligned, properly bit swizzled + * input data set because data may come from an arbitrarily + * aligned, read-only source such as a memory-mapped file. + * Note also that the viewfax decoder does not check for + * running off the end of the input data buffer. This is + * possible for G3-encoded data because it prescans the input + * data to count EOL markers, but can cause problems for G4 + * data. In any event, we don't prescan and must watch for + * running out of data since we can't permit the library to + * scan past the end of the input data buffer. + * + * Finally, note that we must handle remaindered data at the end + * of a strip specially. The coder asks for a fixed number of + * bits when scanning for the next code. This may be more bits + * than are actually present in the data stream. If we appear + * to run out of data but still have some number of valid bits + * remaining then we makeup the requested amount with zeros and + * return successfully. If the returned data is incorrect then + * we should be called again and get a premature EOF error; + * otherwise we should get the right answer. + */ +#ifndef NeedBits8 +#define NeedBits8(n,eoflab) do { \ + if (BitsAvail < (n)) { \ + if (EndOfData()) { \ + if (BitsAvail == 0) /* no valid bits */ \ + goto eoflab; \ + BitsAvail = (n); /* pad with zeros */ \ + } else { \ + BitAcc |= ((uint32) bitmap[*cp++])<>= (n); \ +} while (0) + +#ifdef FAX3_DEBUG +static const char* StateNames[] = { + "Null ", + "Pass ", + "Horiz ", + "V0 ", + "VR ", + "VL ", + "Ext ", + "TermW ", + "TermB ", + "MakeUpW", + "MakeUpB", + "MakeUp ", + "EOL ", +}; +#define DEBUG_SHOW putchar(BitAcc & (1 << t) ? '1' : '0') +#define LOOKUP8(wid,tab,eoflab) do { \ + int t; \ + NeedBits8(wid,eoflab); \ + TabEnt = tab + GetBits(wid); \ + printf("%08lX/%d: %s%5d\t", (long) BitAcc, BitsAvail, \ + StateNames[TabEnt->State], TabEnt->Param); \ + for (t = 0; t < TabEnt->Width; t++) \ + DEBUG_SHOW; \ + putchar('\n'); \ + fflush(stdout); \ + ClrBits(TabEnt->Width); \ +} while (0) +#define LOOKUP16(wid,tab,eoflab) do { \ + int t; \ + NeedBits16(wid,eoflab); \ + TabEnt = tab + GetBits(wid); \ + printf("%08lX/%d: %s%5d\t", (long) BitAcc, BitsAvail, \ + StateNames[TabEnt->State], TabEnt->Param); \ + for (t = 0; t < TabEnt->Width; t++) \ + DEBUG_SHOW; \ + putchar('\n'); \ + fflush(stdout); \ + ClrBits(TabEnt->Width); \ +} while (0) + +#define SETVALUE(x) do { \ + *pa++ = RunLength + (x); \ + printf("SETVALUE: %d\t%d\n", RunLength + (x), a0); \ + a0 += x; \ + RunLength = 0; \ +} while (0) +#else +#define LOOKUP8(wid,tab,eoflab) do { \ + NeedBits8(wid,eoflab); \ + TabEnt = tab + GetBits(wid); \ + ClrBits(TabEnt->Width); \ +} while (0) +#define LOOKUP16(wid,tab,eoflab) do { \ + NeedBits16(wid,eoflab); \ + TabEnt = tab + GetBits(wid); \ + ClrBits(TabEnt->Width); \ +} while (0) + +/* + * Append a run to the run length array for the + * current row and reset decoding state. + */ +#define SETVALUE(x) do { \ + *pa++ = RunLength + (x); \ + a0 += (x); \ + RunLength = 0; \ +} while (0) +#endif + +/* + * Synchronize input decoding at the start of each + * row by scanning for an EOL (if appropriate) and + * skipping any trash data that might be present + * after a decoding error. Note that the decoding + * done elsewhere that recognizes an EOL only consumes + * 11 consecutive zero bits. This means that if EOLcnt + * is non-zero then we still need to scan for the final flag + * bit that is part of the EOL code. + */ +#define SYNC_EOL(eoflab) do { \ + if (EOLcnt == 0) { \ + for (;;) { \ + NeedBits16(11,eoflab); \ + if (GetBits(11) == 0) \ + break; \ + ClrBits(1); \ + } \ + } \ + for (;;) { \ + NeedBits8(8,eoflab); \ + if (GetBits(8)) \ + break; \ + ClrBits(8); \ + } \ + while (GetBits(1) == 0) \ + ClrBits(1); \ + ClrBits(1); /* EOL bit */ \ + EOLcnt = 0; /* reset EOL counter/flag */ \ +} while (0) + +/* + * Cleanup the array of runs after decoding a row. + * We adjust final runs to insure the user buffer is not + * overwritten and/or undecoded area is white filled. + */ +#define CLEANUP_RUNS() do { \ + if (RunLength) \ + SETVALUE(0); \ + if (a0 != lastx) { \ + badlength(a0, lastx); \ + while (a0 > lastx && pa > thisrun) \ + a0 -= *--pa; \ + if (a0 < lastx) { \ + if (a0 < 0) \ + a0 = 0; \ + if ((pa-thisrun)&1) \ + SETVALUE(0); \ + SETVALUE(lastx - a0); \ + } else if (a0 > lastx) { \ + SETVALUE(lastx); \ + SETVALUE(0); \ + } \ + } \ +} while (0) + +/* + * Decode a line of 1D-encoded data. + * + * The line expanders are written as macros so that they can be reused + * but still have direct access to the local variables of the "calling" + * function. + * + * Note that unlike the original version we have to explicitly test for + * a0 >= lastx after each black/white run is decoded. This is because + * the original code depended on the input data being zero-padded to + * insure the decoder recognized an EOL before running out of data. + */ +#define EXPAND1D(eoflab) do { \ + for (;;) { \ + for (;;) { \ + LOOKUP16(12, TIFFFaxWhiteTable, eof1d); \ + switch (TabEnt->State) { \ + case S_EOL: \ + EOLcnt = 1; \ + goto done1d; \ + case S_TermW: \ + SETVALUE(TabEnt->Param); \ + goto doneWhite1d; \ + case S_MakeUpW: \ + case S_MakeUp: \ + a0 += TabEnt->Param; \ + RunLength += TabEnt->Param; \ + break; \ + default: \ + unexpected("WhiteTable", a0); \ + goto done1d; \ + } \ + } \ + doneWhite1d: \ + if (a0 >= lastx) \ + goto done1d; \ + for (;;) { \ + LOOKUP16(13, TIFFFaxBlackTable, eof1d); \ + switch (TabEnt->State) { \ + case S_EOL: \ + EOLcnt = 1; \ + goto done1d; \ + case S_TermB: \ + SETVALUE(TabEnt->Param); \ + goto doneBlack1d; \ + case S_MakeUpB: \ + case S_MakeUp: \ + a0 += TabEnt->Param; \ + RunLength += TabEnt->Param; \ + break; \ + default: \ + unexpected("BlackTable", a0); \ + goto done1d; \ + } \ + } \ + doneBlack1d: \ + if (a0 >= lastx) \ + goto done1d; \ + if( *(pa-1) == 0 && *(pa-2) == 0 ) \ + pa -= 2; \ + } \ +eof1d: \ + prematureEOF(a0); \ + CLEANUP_RUNS(); \ + goto eoflab; \ +done1d: \ + CLEANUP_RUNS(); \ +} while (0) + +/* + * Update the value of b1 using the array + * of runs for the reference line. + */ +#define CHECK_b1 do { \ + if (pa != thisrun) while (b1 <= a0 && b1 < lastx) { \ + b1 += pb[0] + pb[1]; \ + pb += 2; \ + } \ +} while (0) + +/* + * Expand a row of 2D-encoded data. + */ +#define EXPAND2D(eoflab) do { \ + while (a0 < lastx) { \ + LOOKUP8(7, TIFFFaxMainTable, eof2d); \ + switch (TabEnt->State) { \ + case S_Pass: \ + CHECK_b1; \ + b1 += *pb++; \ + RunLength += b1 - a0; \ + a0 = b1; \ + b1 += *pb++; \ + break; \ + case S_Horiz: \ + if ((pa-thisrun)&1) { \ + for (;;) { /* black first */ \ + LOOKUP16(13, TIFFFaxBlackTable, eof2d); \ + switch (TabEnt->State) { \ + case S_TermB: \ + SETVALUE(TabEnt->Param); \ + goto doneWhite2da; \ + case S_MakeUpB: \ + case S_MakeUp: \ + a0 += TabEnt->Param; \ + RunLength += TabEnt->Param; \ + break; \ + default: \ + goto badBlack2d; \ + } \ + } \ + doneWhite2da:; \ + for (;;) { /* then white */ \ + LOOKUP16(12, TIFFFaxWhiteTable, eof2d); \ + switch (TabEnt->State) { \ + case S_TermW: \ + SETVALUE(TabEnt->Param); \ + goto doneBlack2da; \ + case S_MakeUpW: \ + case S_MakeUp: \ + a0 += TabEnt->Param; \ + RunLength += TabEnt->Param; \ + break; \ + default: \ + goto badWhite2d; \ + } \ + } \ + doneBlack2da:; \ + } else { \ + for (;;) { /* white first */ \ + LOOKUP16(12, TIFFFaxWhiteTable, eof2d); \ + switch (TabEnt->State) { \ + case S_TermW: \ + SETVALUE(TabEnt->Param); \ + goto doneWhite2db; \ + case S_MakeUpW: \ + case S_MakeUp: \ + a0 += TabEnt->Param; \ + RunLength += TabEnt->Param; \ + break; \ + default: \ + goto badWhite2d; \ + } \ + } \ + doneWhite2db:; \ + for (;;) { /* then black */ \ + LOOKUP16(13, TIFFFaxBlackTable, eof2d); \ + switch (TabEnt->State) { \ + case S_TermB: \ + SETVALUE(TabEnt->Param); \ + goto doneBlack2db; \ + case S_MakeUpB: \ + case S_MakeUp: \ + a0 += TabEnt->Param; \ + RunLength += TabEnt->Param; \ + break; \ + default: \ + goto badBlack2d; \ + } \ + } \ + doneBlack2db:; \ + } \ + CHECK_b1; \ + break; \ + case S_V0: \ + CHECK_b1; \ + SETVALUE(b1 - a0); \ + b1 += *pb++; \ + break; \ + case S_VR: \ + CHECK_b1; \ + SETVALUE(b1 - a0 + TabEnt->Param); \ + b1 += *pb++; \ + break; \ + case S_VL: \ + CHECK_b1; \ + if (b1 <= (int) (a0 + TabEnt->Param)) { \ + if (b1 < (int) (a0 + TabEnt->Param) || pa != thisrun) { \ + unexpected("VL", a0); \ + goto eol2d; \ + } \ + } \ + SETVALUE(b1 - a0 - TabEnt->Param); \ + b1 -= *--pb; \ + break; \ + case S_Ext: \ + *pa++ = lastx - a0; \ + extension(a0); \ + goto eol2d; \ + case S_EOL: \ + *pa++ = lastx - a0; \ + NeedBits8(4,eof2d); \ + if (GetBits(4)) \ + unexpected("EOL", a0); \ + ClrBits(4); \ + EOLcnt = 1; \ + goto eol2d; \ + default: \ + badMain2d: \ + unexpected("MainTable", a0); \ + goto eol2d; \ + badBlack2d: \ + unexpected("BlackTable", a0); \ + goto eol2d; \ + badWhite2d: \ + unexpected("WhiteTable", a0); \ + goto eol2d; \ + eof2d: \ + prematureEOF(a0); \ + CLEANUP_RUNS(); \ + goto eoflab; \ + } \ + } \ + if (RunLength) { \ + if (RunLength + a0 < lastx) { \ + /* expect a final V0 */ \ + NeedBits8(1,eof2d); \ + if (!GetBits(1)) \ + goto badMain2d; \ + ClrBits(1); \ + } \ + SETVALUE(0); \ + } \ +eol2d: \ + CLEANUP_RUNS(); \ +} while (0) +#endif /* _FAX3_ */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3sm.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3sm.c new file mode 100644 index 000000000..822191ecf --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_fax3sm.c @@ -0,0 +1,1260 @@ +/* WARNING, this file was automatically generated by the + mkg3states program */ +#include "tiff.h" +#include "tif_fax3.h" + const TIFFFaxTabEnt TIFFFaxMainTable[128] = { +{12,7,0},{3,1,0},{5,3,1},{3,1,0},{2,3,0},{3,1,0},{4,3,1},{3,1,0},{1,4,0},{3,1,0}, +{5,3,1},{3,1,0},{2,3,0},{3,1,0},{4,3,1},{3,1,0},{5,6,2},{3,1,0},{5,3,1},{3,1,0}, +{2,3,0},{3,1,0},{4,3,1},{3,1,0},{1,4,0},{3,1,0},{5,3,1},{3,1,0},{2,3,0},{3,1,0}, +{4,3,1},{3,1,0},{5,7,3},{3,1,0},{5,3,1},{3,1,0},{2,3,0},{3,1,0},{4,3,1},{3,1,0}, +{1,4,0},{3,1,0},{5,3,1},{3,1,0},{2,3,0},{3,1,0},{4,3,1},{3,1,0},{4,6,2},{3,1,0}, +{5,3,1},{3,1,0},{2,3,0},{3,1,0},{4,3,1},{3,1,0},{1,4,0},{3,1,0},{5,3,1},{3,1,0}, +{2,3,0},{3,1,0},{4,3,1},{3,1,0},{6,7,0},{3,1,0},{5,3,1},{3,1,0},{2,3,0},{3,1,0}, +{4,3,1},{3,1,0},{1,4,0},{3,1,0},{5,3,1},{3,1,0},{2,3,0},{3,1,0},{4,3,1},{3,1,0}, +{5,6,2},{3,1,0},{5,3,1},{3,1,0},{2,3,0},{3,1,0},{4,3,1},{3,1,0},{1,4,0},{3,1,0}, +{5,3,1},{3,1,0},{2,3,0},{3,1,0},{4,3,1},{3,1,0},{4,7,3},{3,1,0},{5,3,1},{3,1,0}, +{2,3,0},{3,1,0},{4,3,1},{3,1,0},{1,4,0},{3,1,0},{5,3,1},{3,1,0},{2,3,0},{3,1,0}, +{4,3,1},{3,1,0},{4,6,2},{3,1,0},{5,3,1},{3,1,0},{2,3,0},{3,1,0},{4,3,1},{3,1,0}, +{1,4,0},{3,1,0},{5,3,1},{3,1,0},{2,3,0},{3,1,0},{4,3,1},{3,1,0} +}; + const TIFFFaxTabEnt TIFFFaxWhiteTable[4096] = { +{12,11,0},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128}, +{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5}, +{7,8,39},{7,6,16},{9,8,576},{7,4,6},{7,7,19},{7,5,8},{7,8,55},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,45},{7,4,3},{7,5,11},{7,4,5},{7,8,53},{7,5,9},{9,8,448},{7,4,6}, +{7,8,35},{9,5,128},{7,8,51},{7,6,15},{7,8,63},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{9,9,1472},{7,4,5},{7,8,43},{7,6,17},{9,9,1216},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,29},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,8,33},{9,5,128},{7,8,49},{7,6,14},{7,8,61},{7,4,4},{7,4,2},{7,4,7}, +{7,8,47},{7,4,3},{7,8,59},{7,4,5},{7,8,41},{7,6,16},{9,9,960},{7,4,6},{7,8,31},{7,5,8}, +{7,8,57},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5}, +{7,7,26},{7,5,9},{9,9,704},{7,4,6},{7,8,37},{9,5,128},{7,7,25},{7,6,15},{9,8,320},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{11,11,1792},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14}, +{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,40},{7,6,16}, +{9,9,832},{7,4,6},{7,7,19},{7,5,8},{7,8,56},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,46},{7,4,3},{7,5,11},{7,4,5},{7,8,54},{7,5,9},{9,8,512},{7,4,6},{7,8,36},{9,5,128}, +{7,8,52},{7,6,15},{7,8,0},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1600},{7,4,5}, +{7,8,44},{7,6,17},{9,9,1344},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,30},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,8,34},{9,5,128},{7,8,50},{7,6,14},{7,8,62},{7,4,4},{7,4,2},{7,4,7},{7,8,48},{7,4,3}, +{7,8,60},{7,4,5},{7,8,42},{7,6,16},{9,9,1088},{7,4,6},{7,8,32},{7,5,8},{7,8,58},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9}, +{9,8,640},{7,4,6},{7,8,38},{9,5,128},{7,7,25},{7,6,15},{9,8,384},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{0,0,0},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4}, +{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,39},{7,6,16},{9,8,576},{7,4,6}, +{7,7,19},{7,5,8},{7,8,55},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,45},{7,4,3}, +{7,5,11},{7,4,5},{7,8,53},{7,5,9},{9,8,448},{7,4,6},{7,8,35},{9,5,128},{7,8,51},{7,6,15}, +{7,8,63},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1536},{7,4,5},{7,8,43},{7,6,17}, +{9,9,1280},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,29},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,33},{9,5,128}, +{7,8,49},{7,6,14},{7,8,61},{7,4,4},{7,4,2},{7,4,7},{7,8,47},{7,4,3},{7,8,59},{7,4,5}, +{7,8,41},{7,6,16},{9,9,1024},{7,4,6},{7,8,31},{7,5,8},{7,8,57},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,9,768},{7,4,6}, +{7,8,37},{9,5,128},{7,7,25},{7,6,15},{9,8,320},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{11,11,1856},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7}, +{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,40},{7,6,16},{9,9,896},{7,4,6},{7,7,19},{7,5,8}, +{7,8,56},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,46},{7,4,3},{7,5,11},{7,4,5}, +{7,8,54},{7,5,9},{9,8,512},{7,4,6},{7,8,36},{9,5,128},{7,8,52},{7,6,15},{7,8,0},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1728},{7,4,5},{7,8,44},{7,6,17},{9,9,1408},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,30},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,34},{9,5,128},{7,8,50},{7,6,14}, +{7,8,62},{7,4,4},{7,4,2},{7,4,7},{7,8,48},{7,4,3},{7,8,60},{7,4,5},{7,8,42},{7,6,16}, +{9,9,1152},{7,4,6},{7,8,32},{7,5,8},{7,8,58},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,8,640},{7,4,6},{7,8,38},{9,5,128}, +{7,7,25},{7,6,15},{9,8,384},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5}, +{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{0,0,0},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3}, +{7,7,27},{7,4,5},{7,8,39},{7,6,16},{9,8,576},{7,4,6},{7,7,19},{7,5,8},{7,8,55},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,45},{7,4,3},{7,5,11},{7,4,5},{7,8,53},{7,5,9}, +{9,8,448},{7,4,6},{7,8,35},{9,5,128},{7,8,51},{7,6,15},{7,8,63},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{9,9,1472},{7,4,5},{7,8,43},{7,6,17},{9,9,1216},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,29},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,33},{9,5,128},{7,8,49},{7,6,14},{7,8,61},{7,4,4}, +{7,4,2},{7,4,7},{7,8,47},{7,4,3},{7,8,59},{7,4,5},{7,8,41},{7,6,16},{9,9,960},{7,4,6}, +{7,8,31},{7,5,8},{7,8,57},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3}, +{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,9,704},{7,4,6},{7,8,37},{9,5,128},{7,7,25},{7,6,15}, +{9,8,320},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17}, +{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{11,12,2112},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128}, +{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5}, +{7,8,40},{7,6,16},{9,9,832},{7,4,6},{7,7,19},{7,5,8},{7,8,56},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,46},{7,4,3},{7,5,11},{7,4,5},{7,8,54},{7,5,9},{9,8,512},{7,4,6}, +{7,8,36},{9,5,128},{7,8,52},{7,6,15},{7,8,0},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{9,9,1600},{7,4,5},{7,8,44},{7,6,17},{9,9,1344},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,30},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,8,34},{9,5,128},{7,8,50},{7,6,14},{7,8,62},{7,4,4},{7,4,2},{7,4,7}, +{7,8,48},{7,4,3},{7,8,60},{7,4,5},{7,8,42},{7,6,16},{9,9,1088},{7,4,6},{7,8,32},{7,5,8}, +{7,8,58},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5}, +{7,7,26},{7,5,9},{9,8,640},{7,4,6},{7,8,38},{9,5,128},{7,7,25},{7,6,15},{9,8,384},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{0,0,0},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14}, +{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,39},{7,6,16}, +{9,8,576},{7,4,6},{7,7,19},{7,5,8},{7,8,55},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,45},{7,4,3},{7,5,11},{7,4,5},{7,8,53},{7,5,9},{9,8,448},{7,4,6},{7,8,35},{9,5,128}, +{7,8,51},{7,6,15},{7,8,63},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1536},{7,4,5}, +{7,8,43},{7,6,17},{9,9,1280},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,29},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,8,33},{9,5,128},{7,8,49},{7,6,14},{7,8,61},{7,4,4},{7,4,2},{7,4,7},{7,8,47},{7,4,3}, +{7,8,59},{7,4,5},{7,8,41},{7,6,16},{9,9,1024},{7,4,6},{7,8,31},{7,5,8},{7,8,57},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9}, +{9,9,768},{7,4,6},{7,8,37},{9,5,128},{7,7,25},{7,6,15},{9,8,320},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{11,12,2368},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4}, +{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,40},{7,6,16},{9,9,896},{7,4,6}, +{7,7,19},{7,5,8},{7,8,56},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,46},{7,4,3}, +{7,5,11},{7,4,5},{7,8,54},{7,5,9},{9,8,512},{7,4,6},{7,8,36},{9,5,128},{7,8,52},{7,6,15}, +{7,8,0},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1728},{7,4,5},{7,8,44},{7,6,17}, +{9,9,1408},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,30},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,34},{9,5,128}, +{7,8,50},{7,6,14},{7,8,62},{7,4,4},{7,4,2},{7,4,7},{7,8,48},{7,4,3},{7,8,60},{7,4,5}, +{7,8,42},{7,6,16},{9,9,1152},{7,4,6},{7,8,32},{7,5,8},{7,8,58},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,8,640},{7,4,6}, +{7,8,38},{9,5,128},{7,7,25},{7,6,15},{9,8,384},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{0,0,0},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7}, +{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,39},{7,6,16},{9,8,576},{7,4,6},{7,7,19},{7,5,8}, +{7,8,55},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,45},{7,4,3},{7,5,11},{7,4,5}, +{7,8,53},{7,5,9},{9,8,448},{7,4,6},{7,8,35},{9,5,128},{7,8,51},{7,6,15},{7,8,63},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1472},{7,4,5},{7,8,43},{7,6,17},{9,9,1216},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,29},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,33},{9,5,128},{7,8,49},{7,6,14}, +{7,8,61},{7,4,4},{7,4,2},{7,4,7},{7,8,47},{7,4,3},{7,8,59},{7,4,5},{7,8,41},{7,6,16}, +{9,9,960},{7,4,6},{7,8,31},{7,5,8},{7,8,57},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,9,704},{7,4,6},{7,8,37},{9,5,128}, +{7,7,25},{7,6,15},{9,8,320},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5}, +{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{11,12,1984},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3}, +{7,7,27},{7,4,5},{7,8,40},{7,6,16},{9,9,832},{7,4,6},{7,7,19},{7,5,8},{7,8,56},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,46},{7,4,3},{7,5,11},{7,4,5},{7,8,54},{7,5,9}, +{9,8,512},{7,4,6},{7,8,36},{9,5,128},{7,8,52},{7,6,15},{7,8,0},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{9,9,1600},{7,4,5},{7,8,44},{7,6,17},{9,9,1344},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,30},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,34},{9,5,128},{7,8,50},{7,6,14},{7,8,62},{7,4,4}, +{7,4,2},{7,4,7},{7,8,48},{7,4,3},{7,8,60},{7,4,5},{7,8,42},{7,6,16},{9,9,1088},{7,4,6}, +{7,8,32},{7,5,8},{7,8,58},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3}, +{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,8,640},{7,4,6},{7,8,38},{9,5,128},{7,7,25},{7,6,15}, +{9,8,384},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17}, +{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{0,0,0},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128}, +{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5}, +{7,8,39},{7,6,16},{9,8,576},{7,4,6},{7,7,19},{7,5,8},{7,8,55},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,45},{7,4,3},{7,5,11},{7,4,5},{7,8,53},{7,5,9},{9,8,448},{7,4,6}, +{7,8,35},{9,5,128},{7,8,51},{7,6,15},{7,8,63},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{9,9,1536},{7,4,5},{7,8,43},{7,6,17},{9,9,1280},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,29},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,8,33},{9,5,128},{7,8,49},{7,6,14},{7,8,61},{7,4,4},{7,4,2},{7,4,7}, +{7,8,47},{7,4,3},{7,8,59},{7,4,5},{7,8,41},{7,6,16},{9,9,1024},{7,4,6},{7,8,31},{7,5,8}, +{7,8,57},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5}, +{7,7,26},{7,5,9},{9,9,768},{7,4,6},{7,8,37},{9,5,128},{7,7,25},{7,6,15},{9,8,320},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{11,11,1920},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14}, +{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,40},{7,6,16}, +{9,9,896},{7,4,6},{7,7,19},{7,5,8},{7,8,56},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,46},{7,4,3},{7,5,11},{7,4,5},{7,8,54},{7,5,9},{9,8,512},{7,4,6},{7,8,36},{9,5,128}, +{7,8,52},{7,6,15},{7,8,0},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1728},{7,4,5}, +{7,8,44},{7,6,17},{9,9,1408},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,30},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,8,34},{9,5,128},{7,8,50},{7,6,14},{7,8,62},{7,4,4},{7,4,2},{7,4,7},{7,8,48},{7,4,3}, +{7,8,60},{7,4,5},{7,8,42},{7,6,16},{9,9,1152},{7,4,6},{7,8,32},{7,5,8},{7,8,58},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9}, +{9,8,640},{7,4,6},{7,8,38},{9,5,128},{7,7,25},{7,6,15},{9,8,384},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{0,0,0},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4}, +{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,39},{7,6,16},{9,8,576},{7,4,6}, +{7,7,19},{7,5,8},{7,8,55},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,45},{7,4,3}, +{7,5,11},{7,4,5},{7,8,53},{7,5,9},{9,8,448},{7,4,6},{7,8,35},{9,5,128},{7,8,51},{7,6,15}, +{7,8,63},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1472},{7,4,5},{7,8,43},{7,6,17}, +{9,9,1216},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,29},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,33},{9,5,128}, +{7,8,49},{7,6,14},{7,8,61},{7,4,4},{7,4,2},{7,4,7},{7,8,47},{7,4,3},{7,8,59},{7,4,5}, +{7,8,41},{7,6,16},{9,9,960},{7,4,6},{7,8,31},{7,5,8},{7,8,57},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,9,704},{7,4,6}, +{7,8,37},{9,5,128},{7,7,25},{7,6,15},{9,8,320},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{11,12,2240},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7}, +{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,40},{7,6,16},{9,9,832},{7,4,6},{7,7,19},{7,5,8}, +{7,8,56},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,46},{7,4,3},{7,5,11},{7,4,5}, +{7,8,54},{7,5,9},{9,8,512},{7,4,6},{7,8,36},{9,5,128},{7,8,52},{7,6,15},{7,8,0},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1600},{7,4,5},{7,8,44},{7,6,17},{9,9,1344},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,30},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,34},{9,5,128},{7,8,50},{7,6,14}, +{7,8,62},{7,4,4},{7,4,2},{7,4,7},{7,8,48},{7,4,3},{7,8,60},{7,4,5},{7,8,42},{7,6,16}, +{9,9,1088},{7,4,6},{7,8,32},{7,5,8},{7,8,58},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,8,640},{7,4,6},{7,8,38},{9,5,128}, +{7,7,25},{7,6,15},{9,8,384},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5}, +{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{0,0,0},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3}, +{7,7,27},{7,4,5},{7,8,39},{7,6,16},{9,8,576},{7,4,6},{7,7,19},{7,5,8},{7,8,55},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,45},{7,4,3},{7,5,11},{7,4,5},{7,8,53},{7,5,9}, +{9,8,448},{7,4,6},{7,8,35},{9,5,128},{7,8,51},{7,6,15},{7,8,63},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{9,9,1536},{7,4,5},{7,8,43},{7,6,17},{9,9,1280},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,29},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,33},{9,5,128},{7,8,49},{7,6,14},{7,8,61},{7,4,4}, +{7,4,2},{7,4,7},{7,8,47},{7,4,3},{7,8,59},{7,4,5},{7,8,41},{7,6,16},{9,9,1024},{7,4,6}, +{7,8,31},{7,5,8},{7,8,57},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3}, +{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,9,768},{7,4,6},{7,8,37},{9,5,128},{7,7,25},{7,6,15}, +{9,8,320},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17}, +{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{11,12,2496},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128}, +{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5}, +{7,8,40},{7,6,16},{9,9,896},{7,4,6},{7,7,19},{7,5,8},{7,8,56},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,46},{7,4,3},{7,5,11},{7,4,5},{7,8,54},{7,5,9},{9,8,512},{7,4,6}, +{7,8,36},{9,5,128},{7,8,52},{7,6,15},{7,8,0},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{9,9,1728},{7,4,5},{7,8,44},{7,6,17},{9,9,1408},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,30},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,8,34},{9,5,128},{7,8,50},{7,6,14},{7,8,62},{7,4,4},{7,4,2},{7,4,7}, +{7,8,48},{7,4,3},{7,8,60},{7,4,5},{7,8,42},{7,6,16},{9,9,1152},{7,4,6},{7,8,32},{7,5,8}, +{7,8,58},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5}, +{7,7,26},{7,5,9},{9,8,640},{7,4,6},{7,8,38},{9,5,128},{7,7,25},{7,6,15},{9,8,384},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{12,11,0},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14}, +{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,39},{7,6,16}, +{9,8,576},{7,4,6},{7,7,19},{7,5,8},{7,8,55},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,45},{7,4,3},{7,5,11},{7,4,5},{7,8,53},{7,5,9},{9,8,448},{7,4,6},{7,8,35},{9,5,128}, +{7,8,51},{7,6,15},{7,8,63},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1472},{7,4,5}, +{7,8,43},{7,6,17},{9,9,1216},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,29},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,8,33},{9,5,128},{7,8,49},{7,6,14},{7,8,61},{7,4,4},{7,4,2},{7,4,7},{7,8,47},{7,4,3}, +{7,8,59},{7,4,5},{7,8,41},{7,6,16},{9,9,960},{7,4,6},{7,8,31},{7,5,8},{7,8,57},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9}, +{9,9,704},{7,4,6},{7,8,37},{9,5,128},{7,7,25},{7,6,15},{9,8,320},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{11,11,1792},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4}, +{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,40},{7,6,16},{9,9,832},{7,4,6}, +{7,7,19},{7,5,8},{7,8,56},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,46},{7,4,3}, +{7,5,11},{7,4,5},{7,8,54},{7,5,9},{9,8,512},{7,4,6},{7,8,36},{9,5,128},{7,8,52},{7,6,15}, +{7,8,0},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1600},{7,4,5},{7,8,44},{7,6,17}, +{9,9,1344},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,30},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,34},{9,5,128}, +{7,8,50},{7,6,14},{7,8,62},{7,4,4},{7,4,2},{7,4,7},{7,8,48},{7,4,3},{7,8,60},{7,4,5}, +{7,8,42},{7,6,16},{9,9,1088},{7,4,6},{7,8,32},{7,5,8},{7,8,58},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,8,640},{7,4,6}, +{7,8,38},{9,5,128},{7,7,25},{7,6,15},{9,8,384},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{0,0,0},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7}, +{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,39},{7,6,16},{9,8,576},{7,4,6},{7,7,19},{7,5,8}, +{7,8,55},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,45},{7,4,3},{7,5,11},{7,4,5}, +{7,8,53},{7,5,9},{9,8,448},{7,4,6},{7,8,35},{9,5,128},{7,8,51},{7,6,15},{7,8,63},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1536},{7,4,5},{7,8,43},{7,6,17},{9,9,1280},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,29},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,33},{9,5,128},{7,8,49},{7,6,14}, +{7,8,61},{7,4,4},{7,4,2},{7,4,7},{7,8,47},{7,4,3},{7,8,59},{7,4,5},{7,8,41},{7,6,16}, +{9,9,1024},{7,4,6},{7,8,31},{7,5,8},{7,8,57},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,9,768},{7,4,6},{7,8,37},{9,5,128}, +{7,7,25},{7,6,15},{9,8,320},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5}, +{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{11,11,1856},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3}, +{7,7,27},{7,4,5},{7,8,40},{7,6,16},{9,9,896},{7,4,6},{7,7,19},{7,5,8},{7,8,56},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,46},{7,4,3},{7,5,11},{7,4,5},{7,8,54},{7,5,9}, +{9,8,512},{7,4,6},{7,8,36},{9,5,128},{7,8,52},{7,6,15},{7,8,0},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{9,9,1728},{7,4,5},{7,8,44},{7,6,17},{9,9,1408},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,30},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,34},{9,5,128},{7,8,50},{7,6,14},{7,8,62},{7,4,4}, +{7,4,2},{7,4,7},{7,8,48},{7,4,3},{7,8,60},{7,4,5},{7,8,42},{7,6,16},{9,9,1152},{7,4,6}, +{7,8,32},{7,5,8},{7,8,58},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3}, +{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,8,640},{7,4,6},{7,8,38},{9,5,128},{7,7,25},{7,6,15}, +{9,8,384},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17}, +{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{0,0,0},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128}, +{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5}, +{7,8,39},{7,6,16},{9,8,576},{7,4,6},{7,7,19},{7,5,8},{7,8,55},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,45},{7,4,3},{7,5,11},{7,4,5},{7,8,53},{7,5,9},{9,8,448},{7,4,6}, +{7,8,35},{9,5,128},{7,8,51},{7,6,15},{7,8,63},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{9,9,1472},{7,4,5},{7,8,43},{7,6,17},{9,9,1216},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,29},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,8,33},{9,5,128},{7,8,49},{7,6,14},{7,8,61},{7,4,4},{7,4,2},{7,4,7}, +{7,8,47},{7,4,3},{7,8,59},{7,4,5},{7,8,41},{7,6,16},{9,9,960},{7,4,6},{7,8,31},{7,5,8}, +{7,8,57},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5}, +{7,7,26},{7,5,9},{9,9,704},{7,4,6},{7,8,37},{9,5,128},{7,7,25},{7,6,15},{9,8,320},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{11,12,2176},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14}, +{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,40},{7,6,16}, +{9,9,832},{7,4,6},{7,7,19},{7,5,8},{7,8,56},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,46},{7,4,3},{7,5,11},{7,4,5},{7,8,54},{7,5,9},{9,8,512},{7,4,6},{7,8,36},{9,5,128}, +{7,8,52},{7,6,15},{7,8,0},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1600},{7,4,5}, +{7,8,44},{7,6,17},{9,9,1344},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,30},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,8,34},{9,5,128},{7,8,50},{7,6,14},{7,8,62},{7,4,4},{7,4,2},{7,4,7},{7,8,48},{7,4,3}, +{7,8,60},{7,4,5},{7,8,42},{7,6,16},{9,9,1088},{7,4,6},{7,8,32},{7,5,8},{7,8,58},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9}, +{9,8,640},{7,4,6},{7,8,38},{9,5,128},{7,7,25},{7,6,15},{9,8,384},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{0,0,0},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4}, +{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,39},{7,6,16},{9,8,576},{7,4,6}, +{7,7,19},{7,5,8},{7,8,55},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,45},{7,4,3}, +{7,5,11},{7,4,5},{7,8,53},{7,5,9},{9,8,448},{7,4,6},{7,8,35},{9,5,128},{7,8,51},{7,6,15}, +{7,8,63},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1536},{7,4,5},{7,8,43},{7,6,17}, +{9,9,1280},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,29},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,33},{9,5,128}, +{7,8,49},{7,6,14},{7,8,61},{7,4,4},{7,4,2},{7,4,7},{7,8,47},{7,4,3},{7,8,59},{7,4,5}, +{7,8,41},{7,6,16},{9,9,1024},{7,4,6},{7,8,31},{7,5,8},{7,8,57},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,9,768},{7,4,6}, +{7,8,37},{9,5,128},{7,7,25},{7,6,15},{9,8,320},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{11,12,2432},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7}, +{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,40},{7,6,16},{9,9,896},{7,4,6},{7,7,19},{7,5,8}, +{7,8,56},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,46},{7,4,3},{7,5,11},{7,4,5}, +{7,8,54},{7,5,9},{9,8,512},{7,4,6},{7,8,36},{9,5,128},{7,8,52},{7,6,15},{7,8,0},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1728},{7,4,5},{7,8,44},{7,6,17},{9,9,1408},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,30},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,34},{9,5,128},{7,8,50},{7,6,14}, +{7,8,62},{7,4,4},{7,4,2},{7,4,7},{7,8,48},{7,4,3},{7,8,60},{7,4,5},{7,8,42},{7,6,16}, +{9,9,1152},{7,4,6},{7,8,32},{7,5,8},{7,8,58},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,8,640},{7,4,6},{7,8,38},{9,5,128}, +{7,7,25},{7,6,15},{9,8,384},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5}, +{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{0,0,0},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3}, +{7,7,27},{7,4,5},{7,8,39},{7,6,16},{9,8,576},{7,4,6},{7,7,19},{7,5,8},{7,8,55},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,45},{7,4,3},{7,5,11},{7,4,5},{7,8,53},{7,5,9}, +{9,8,448},{7,4,6},{7,8,35},{9,5,128},{7,8,51},{7,6,15},{7,8,63},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{9,9,1472},{7,4,5},{7,8,43},{7,6,17},{9,9,1216},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,29},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,33},{9,5,128},{7,8,49},{7,6,14},{7,8,61},{7,4,4}, +{7,4,2},{7,4,7},{7,8,47},{7,4,3},{7,8,59},{7,4,5},{7,8,41},{7,6,16},{9,9,960},{7,4,6}, +{7,8,31},{7,5,8},{7,8,57},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3}, +{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,9,704},{7,4,6},{7,8,37},{9,5,128},{7,7,25},{7,6,15}, +{9,8,320},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17}, +{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{11,12,2048},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128}, +{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5}, +{7,8,40},{7,6,16},{9,9,832},{7,4,6},{7,7,19},{7,5,8},{7,8,56},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,46},{7,4,3},{7,5,11},{7,4,5},{7,8,54},{7,5,9},{9,8,512},{7,4,6}, +{7,8,36},{9,5,128},{7,8,52},{7,6,15},{7,8,0},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{9,9,1600},{7,4,5},{7,8,44},{7,6,17},{9,9,1344},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,30},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,8,34},{9,5,128},{7,8,50},{7,6,14},{7,8,62},{7,4,4},{7,4,2},{7,4,7}, +{7,8,48},{7,4,3},{7,8,60},{7,4,5},{7,8,42},{7,6,16},{9,9,1088},{7,4,6},{7,8,32},{7,5,8}, +{7,8,58},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5}, +{7,7,26},{7,5,9},{9,8,640},{7,4,6},{7,8,38},{9,5,128},{7,7,25},{7,6,15},{9,8,384},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{0,0,0},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14}, +{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,39},{7,6,16}, +{9,8,576},{7,4,6},{7,7,19},{7,5,8},{7,8,55},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,45},{7,4,3},{7,5,11},{7,4,5},{7,8,53},{7,5,9},{9,8,448},{7,4,6},{7,8,35},{9,5,128}, +{7,8,51},{7,6,15},{7,8,63},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1536},{7,4,5}, +{7,8,43},{7,6,17},{9,9,1280},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,29},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,8,33},{9,5,128},{7,8,49},{7,6,14},{7,8,61},{7,4,4},{7,4,2},{7,4,7},{7,8,47},{7,4,3}, +{7,8,59},{7,4,5},{7,8,41},{7,6,16},{9,9,1024},{7,4,6},{7,8,31},{7,5,8},{7,8,57},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9}, +{9,9,768},{7,4,6},{7,8,37},{9,5,128},{7,7,25},{7,6,15},{9,8,320},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{11,11,1920},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4}, +{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,40},{7,6,16},{9,9,896},{7,4,6}, +{7,7,19},{7,5,8},{7,8,56},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,46},{7,4,3}, +{7,5,11},{7,4,5},{7,8,54},{7,5,9},{9,8,512},{7,4,6},{7,8,36},{9,5,128},{7,8,52},{7,6,15}, +{7,8,0},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1728},{7,4,5},{7,8,44},{7,6,17}, +{9,9,1408},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,30},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,34},{9,5,128}, +{7,8,50},{7,6,14},{7,8,62},{7,4,4},{7,4,2},{7,4,7},{7,8,48},{7,4,3},{7,8,60},{7,4,5}, +{7,8,42},{7,6,16},{9,9,1152},{7,4,6},{7,8,32},{7,5,8},{7,8,58},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,8,640},{7,4,6}, +{7,8,38},{9,5,128},{7,7,25},{7,6,15},{9,8,384},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{0,0,0},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7}, +{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,39},{7,6,16},{9,8,576},{7,4,6},{7,7,19},{7,5,8}, +{7,8,55},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,45},{7,4,3},{7,5,11},{7,4,5}, +{7,8,53},{7,5,9},{9,8,448},{7,4,6},{7,8,35},{9,5,128},{7,8,51},{7,6,15},{7,8,63},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1472},{7,4,5},{7,8,43},{7,6,17},{9,9,1216},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,29},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,33},{9,5,128},{7,8,49},{7,6,14}, +{7,8,61},{7,4,4},{7,4,2},{7,4,7},{7,8,47},{7,4,3},{7,8,59},{7,4,5},{7,8,41},{7,6,16}, +{9,9,960},{7,4,6},{7,8,31},{7,5,8},{7,8,57},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,9,704},{7,4,6},{7,8,37},{9,5,128}, +{7,7,25},{7,6,15},{9,8,320},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5}, +{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{11,12,2304},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,7,20},{9,5,128},{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3}, +{7,7,27},{7,4,5},{7,8,40},{7,6,16},{9,9,832},{7,4,6},{7,7,19},{7,5,8},{7,8,56},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,46},{7,4,3},{7,5,11},{7,4,5},{7,8,54},{7,5,9}, +{9,8,512},{7,4,6},{7,8,36},{9,5,128},{7,8,52},{7,6,15},{7,8,0},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{9,9,1600},{7,4,5},{7,8,44},{7,6,17},{9,9,1344},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,30},{7,4,3},{7,5,11},{7,4,5}, +{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,8,34},{9,5,128},{7,8,50},{7,6,14},{7,8,62},{7,4,4}, +{7,4,2},{7,4,7},{7,8,48},{7,4,3},{7,8,60},{7,4,5},{7,8,42},{7,6,16},{9,9,1088},{7,4,6}, +{7,8,32},{7,5,8},{7,8,58},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3}, +{7,5,11},{7,4,5},{7,7,26},{7,5,9},{9,8,640},{7,4,6},{7,8,38},{9,5,128},{7,7,25},{7,6,15}, +{9,8,384},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17}, +{9,7,256},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{0,0,0},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128}, +{7,7,24},{7,6,14},{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5}, +{7,8,39},{7,6,16},{9,8,576},{7,4,6},{7,7,19},{7,5,8},{7,8,55},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,45},{7,4,3},{7,5,11},{7,4,5},{7,8,53},{7,5,9},{9,8,448},{7,4,6}, +{7,8,35},{9,5,128},{7,8,51},{7,6,15},{7,8,63},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3}, +{9,9,1536},{7,4,5},{7,8,43},{7,6,17},{9,9,1280},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,8,29},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9}, +{9,6,1664},{7,4,6},{7,8,33},{9,5,128},{7,8,49},{7,6,14},{7,8,61},{7,4,4},{7,4,2},{7,4,7}, +{7,8,47},{7,4,3},{7,8,59},{7,4,5},{7,8,41},{7,6,16},{9,9,1024},{7,4,6},{7,8,31},{7,5,8}, +{7,8,57},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5}, +{7,7,26},{7,5,9},{9,9,768},{7,4,6},{7,8,37},{9,5,128},{7,7,25},{7,6,15},{9,8,320},{7,4,4}, +{7,4,2},{7,4,7},{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6}, +{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7},{11,12,2560},{7,4,3}, +{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6},{7,7,20},{9,5,128},{7,7,24},{7,6,14}, +{7,7,28},{7,4,4},{7,4,2},{7,4,7},{7,7,23},{7,4,3},{7,7,27},{7,4,5},{7,8,40},{7,6,16}, +{9,9,896},{7,4,6},{7,7,19},{7,5,8},{7,8,56},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7}, +{7,8,46},{7,4,3},{7,5,11},{7,4,5},{7,8,54},{7,5,9},{9,8,512},{7,4,6},{7,8,36},{9,5,128}, +{7,8,52},{7,6,15},{7,8,0},{7,4,4},{7,4,2},{7,4,7},{7,6,13},{7,4,3},{9,9,1728},{7,4,5}, +{7,8,44},{7,6,17},{9,9,1408},{7,4,6},{7,6,1},{7,5,8},{9,6,192},{9,5,64},{7,5,10},{7,4,4}, +{7,4,2},{7,4,7},{7,8,30},{7,4,3},{7,5,11},{7,4,5},{7,6,12},{7,5,9},{9,6,1664},{7,4,6}, +{7,8,34},{9,5,128},{7,8,50},{7,6,14},{7,8,62},{7,4,4},{7,4,2},{7,4,7},{7,8,48},{7,4,3}, +{7,8,60},{7,4,5},{7,8,42},{7,6,16},{9,9,1152},{7,4,6},{7,8,32},{7,5,8},{7,8,58},{9,5,64}, +{7,5,10},{7,4,4},{7,4,2},{7,4,7},{7,7,22},{7,4,3},{7,5,11},{7,4,5},{7,7,26},{7,5,9}, +{9,8,640},{7,4,6},{7,8,38},{9,5,128},{7,7,25},{7,6,15},{9,8,384},{7,4,4},{7,4,2},{7,4,7}, +{7,6,13},{7,4,3},{7,7,18},{7,4,5},{7,7,21},{7,6,17},{9,7,256},{7,4,6},{7,6,1},{7,5,8}, +{9,6,192},{9,5,64},{7,5,10},{7,4,4},{7,4,2},{7,4,7} +}; + const TIFFFaxTabEnt TIFFFaxBlackTable[8192] = { +{12,11,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,9,15},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,18},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,17},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,11,1792},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,11,23},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,20},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,11,25},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,12,128},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,56},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,30},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,11,1856},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,57},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,11,21},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,54},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,9,15},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,52},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,48},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{11,12,2112},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,44},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,36},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,12,384},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,28},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,60},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,40},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,2368},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,16},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{10,10,64},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,9,15},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,18},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,10,17},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{11,12,1984},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,50},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,34},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,1664},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,26},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,1408},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,32},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,11,1920},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,61},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,42},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{10,13,1024},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,9,15},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{10,13,768},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,62},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,2240},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,46},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,38},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,512},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,11,19},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,24},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,22},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{11,12,2496},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,10,16},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,0},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,10,64},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{12,11,0},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,9,15},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,10,18},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,17},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,11,1792},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,23},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,20},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,11,25},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{10,12,192},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,1280},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,31},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{11,11,1856},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,58},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,11,21},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,896},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,9,15},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,640},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,49},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,2176},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,45},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,37},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{10,12,448},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,29},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{10,13,1536},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,41},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,2432},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,16},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,10,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,10,64},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,9,15},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,18},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,17},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{11,12,2048},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,51},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,35},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,12,320},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,27},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,59},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,33},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,11,1920},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,12,256},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,43},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{10,13,1152},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,9,15},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,55},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,63},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{11,12,2304},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,47},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,39},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,53},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,19},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,24},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,22},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,2560},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,10,16},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,0},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{10,10,64},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{12,11,0},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,9,15},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,10,18},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,10,17},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,11,1792},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,23},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,11,20},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,25},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{10,12,128},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,56},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,30},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{11,11,1856},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,57},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,21},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,54},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,9,15},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,52},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,48},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,2112},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,44},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,36},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{10,12,384},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,28},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,60},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,40},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{11,12,2368},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,16},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,10,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,10,64},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,9,15},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,18},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,17},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,1984},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,50},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,34},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{10,13,1728},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,26},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{10,13,1472},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,32},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,11,1920},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,61},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,42},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,1088},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,9,15},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,832},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,62},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{11,12,2240},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,46},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,38},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,576},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,19},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,11,24},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,22},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,2496},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,16},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{10,10,64},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{12,11,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,9,15},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,18},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,10,17},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{11,11,1792},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,23},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,11,20},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,25},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,12,192},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,1344},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,31},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,11,1856},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,58},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,21},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{10,13,960},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,9,15},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{10,13,704},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,49},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,2176},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,45},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,37},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,12,448},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,29},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,1600},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,41},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{11,12,2432},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,10,16},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,0},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,10,64},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,9,15},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,10,18},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,17},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,2048},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,51},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,35},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{10,12,320},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,27},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,59},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,33},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{11,11,1920},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,12,256},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,43},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,13,1216},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{0,0,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,8,13},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,9,15},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,55},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,63},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,2304},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,12,47},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,12,39},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,12,53},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,12},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{0,0,0},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,8,13},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,11,19},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,11,24},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,11,22},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{11,12,2560},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,7,10},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,10,16},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2},{8,10,0},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2}, +{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{10,10,64},{8,2,3}, +{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,9},{8,2,3},{8,3,1},{8,2,2}, +{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,11},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3}, +{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2}, +{8,8,14},{8,2,3},{8,3,1},{8,2,2},{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,6,8},{8,2,3}, +{8,3,1},{8,2,2},{8,4,5},{8,2,3},{8,3,4},{8,2,2},{8,7,12},{8,2,3},{8,3,1},{8,2,2}, +{8,4,6},{8,2,3},{8,3,4},{8,2,2},{8,5,7},{8,2,3},{8,3,1},{8,2,2},{8,4,5},{8,2,3}, +{8,3,4},{8,2,2} +}; +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_flush.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_flush.c new file mode 100644 index 000000000..fd14e4cda --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_flush.c @@ -0,0 +1,118 @@ +/* $Id: tif_flush.c,v 1.9 2010-03-31 06:40:10 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + */ +#include "tiffiop.h" + +int +TIFFFlush(TIFF* tif) +{ + if( tif->tif_mode == O_RDONLY ) + return 1; + + if (!TIFFFlushData(tif)) + return (0); + + /* In update (r+) mode we try to detect the case where + only the strip/tile map has been altered, and we try to + rewrite only that portion of the directory without + making any other changes */ + + if( (tif->tif_flags & TIFF_DIRTYSTRIP) + && !(tif->tif_flags & TIFF_DIRTYDIRECT) + && tif->tif_mode == O_RDWR ) + { + uint64 *offsets=NULL, *sizes=NULL; + + if( TIFFIsTiled(tif) ) + { + if( TIFFGetField( tif, TIFFTAG_TILEOFFSETS, &offsets ) + && TIFFGetField( tif, TIFFTAG_TILEBYTECOUNTS, &sizes ) + && _TIFFRewriteField( tif, TIFFTAG_TILEOFFSETS, TIFF_LONG8, + tif->tif_dir.td_nstrips, offsets ) + && _TIFFRewriteField( tif, TIFFTAG_TILEBYTECOUNTS, TIFF_LONG8, + tif->tif_dir.td_nstrips, sizes ) ) + { + tif->tif_flags &= ~TIFF_DIRTYSTRIP; + tif->tif_flags &= ~TIFF_BEENWRITING; + return 1; + } + } + else + { + if( TIFFGetField( tif, TIFFTAG_STRIPOFFSETS, &offsets ) + && TIFFGetField( tif, TIFFTAG_STRIPBYTECOUNTS, &sizes ) + && _TIFFRewriteField( tif, TIFFTAG_STRIPOFFSETS, TIFF_LONG8, + tif->tif_dir.td_nstrips, offsets ) + && _TIFFRewriteField( tif, TIFFTAG_STRIPBYTECOUNTS, TIFF_LONG8, + tif->tif_dir.td_nstrips, sizes ) ) + { + tif->tif_flags &= ~TIFF_DIRTYSTRIP; + tif->tif_flags &= ~TIFF_BEENWRITING; + return 1; + } + } + } + + if ((tif->tif_flags & (TIFF_DIRTYDIRECT|TIFF_DIRTYSTRIP)) + && !TIFFRewriteDirectory(tif)) + return (0); + + return (1); +} + +/* + * Flush buffered data to the file. + * + * Frank Warmerdam'2000: I modified this to return 1 if TIFF_BEENWRITING + * is not set, so that TIFFFlush() will proceed to write out the directory. + * The documentation says returning 1 is an error indicator, but not having + * been writing isn't exactly a an error. Hopefully this doesn't cause + * problems for other people. + */ +int +TIFFFlushData(TIFF* tif) +{ + if ((tif->tif_flags & TIFF_BEENWRITING) == 0) + return (1); + if (tif->tif_flags & TIFF_POSTENCODE) { + tif->tif_flags &= ~TIFF_POSTENCODE; + if (!(*tif->tif_postencode)(tif)) + return (0); + } + return (TIFFFlushData1(tif)); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_getimage.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_getimage.c new file mode 100644 index 000000000..a85273cc3 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_getimage.c @@ -0,0 +1,2867 @@ +/* $Id: tif_getimage.c,v 1.82 2012-06-06 00:17:49 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1991-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Read and return a packed RGBA image. + */ +#include "tiffiop.h" +#include + +static int gtTileContig(TIFFRGBAImage*, uint32*, uint32, uint32); +static int gtTileSeparate(TIFFRGBAImage*, uint32*, uint32, uint32); +static int gtStripContig(TIFFRGBAImage*, uint32*, uint32, uint32); +static int gtStripSeparate(TIFFRGBAImage*, uint32*, uint32, uint32); +static int PickContigCase(TIFFRGBAImage*); +static int PickSeparateCase(TIFFRGBAImage*); + +static int BuildMapUaToAa(TIFFRGBAImage* img); +static int BuildMapBitdepth16To8(TIFFRGBAImage* img); + +static const char photoTag[] = "PhotometricInterpretation"; + +/* + * Helper constants used in Orientation tag handling + */ +#define FLIP_VERTICALLY 0x01 +#define FLIP_HORIZONTALLY 0x02 + +/* + * Color conversion constants. We will define display types here. + */ + +static const TIFFDisplay display_sRGB = { + { /* XYZ -> luminance matrix */ + { 3.2410F, -1.5374F, -0.4986F }, + { -0.9692F, 1.8760F, 0.0416F }, + { 0.0556F, -0.2040F, 1.0570F } + }, + 100.0F, 100.0F, 100.0F, /* Light o/p for reference white */ + 255, 255, 255, /* Pixel values for ref. white */ + 1.0F, 1.0F, 1.0F, /* Residual light o/p for black pixel */ + 2.4F, 2.4F, 2.4F, /* Gamma values for the three guns */ +}; + +/* + * Check the image to see if TIFFReadRGBAImage can deal with it. + * 1/0 is returned according to whether or not the image can + * be handled. If 0 is returned, emsg contains the reason + * why it is being rejected. + */ +int +TIFFRGBAImageOK(TIFF* tif, char emsg[1024]) +{ + TIFFDirectory* td = &tif->tif_dir; + uint16 photometric; + int colorchannels; + + if (!tif->tif_decodestatus) { + sprintf(emsg, "Sorry, requested compression method is not configured"); + return (0); + } + switch (td->td_bitspersample) { + case 1: + case 2: + case 4: + case 8: + case 16: + break; + default: + sprintf(emsg, "Sorry, can not handle images with %d-bit samples", + td->td_bitspersample); + return (0); + } + colorchannels = td->td_samplesperpixel - td->td_extrasamples; + if (!TIFFGetField(tif, TIFFTAG_PHOTOMETRIC, &photometric)) { + switch (colorchannels) { + case 1: + photometric = PHOTOMETRIC_MINISBLACK; + break; + case 3: + photometric = PHOTOMETRIC_RGB; + break; + default: + sprintf(emsg, "Missing needed %s tag", photoTag); + return (0); + } + } + switch (photometric) { + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + case PHOTOMETRIC_PALETTE: + if (td->td_planarconfig == PLANARCONFIG_CONTIG + && td->td_samplesperpixel != 1 + && td->td_bitspersample < 8 ) { + sprintf(emsg, + "Sorry, can not handle contiguous data with %s=%d, " + "and %s=%d and Bits/Sample=%d", + photoTag, photometric, + "Samples/pixel", td->td_samplesperpixel, + td->td_bitspersample); + return (0); + } + /* + * We should likely validate that any extra samples are either + * to be ignored, or are alpha, and if alpha we should try to use + * them. But for now we won't bother with this. + */ + break; + case PHOTOMETRIC_YCBCR: + /* + * TODO: if at all meaningful and useful, make more complete + * support check here, or better still, refactor to let supporting + * code decide whether there is support and what meaningfull + * error to return + */ + break; + case PHOTOMETRIC_RGB: + if (colorchannels < 3) { + sprintf(emsg, "Sorry, can not handle RGB image with %s=%d", + "Color channels", colorchannels); + return (0); + } + break; + case PHOTOMETRIC_SEPARATED: + { + uint16 inkset; + TIFFGetFieldDefaulted(tif, TIFFTAG_INKSET, &inkset); + if (inkset != INKSET_CMYK) { + sprintf(emsg, + "Sorry, can not handle separated image with %s=%d", + "InkSet", inkset); + return 0; + } + if (td->td_samplesperpixel < 4) { + sprintf(emsg, + "Sorry, can not handle separated image with %s=%d", + "Samples/pixel", td->td_samplesperpixel); + return 0; + } + break; + } + case PHOTOMETRIC_LOGL: + if (td->td_compression != COMPRESSION_SGILOG) { + sprintf(emsg, "Sorry, LogL data must have %s=%d", + "Compression", COMPRESSION_SGILOG); + return (0); + } + break; + case PHOTOMETRIC_LOGLUV: + if (td->td_compression != COMPRESSION_SGILOG && + td->td_compression != COMPRESSION_SGILOG24) { + sprintf(emsg, "Sorry, LogLuv data must have %s=%d or %d", + "Compression", COMPRESSION_SGILOG, COMPRESSION_SGILOG24); + return (0); + } + if (td->td_planarconfig != PLANARCONFIG_CONTIG) { + sprintf(emsg, "Sorry, can not handle LogLuv images with %s=%d", + "Planarconfiguration", td->td_planarconfig); + return (0); + } + break; + case PHOTOMETRIC_CIELAB: + break; + default: + sprintf(emsg, "Sorry, can not handle image with %s=%d", + photoTag, photometric); + return (0); + } + return (1); +} + +void +TIFFRGBAImageEnd(TIFFRGBAImage* img) +{ + if (img->Map) + _TIFFfree(img->Map), img->Map = NULL; + if (img->BWmap) + _TIFFfree(img->BWmap), img->BWmap = NULL; + if (img->PALmap) + _TIFFfree(img->PALmap), img->PALmap = NULL; + if (img->ycbcr) + _TIFFfree(img->ycbcr), img->ycbcr = NULL; + if (img->cielab) + _TIFFfree(img->cielab), img->cielab = NULL; + if (img->UaToAa) + _TIFFfree(img->UaToAa), img->UaToAa = NULL; + if (img->Bitdepth16To8) + _TIFFfree(img->Bitdepth16To8), img->Bitdepth16To8 = NULL; + + if( img->redcmap ) { + _TIFFfree( img->redcmap ); + _TIFFfree( img->greencmap ); + _TIFFfree( img->bluecmap ); + img->redcmap = img->greencmap = img->bluecmap = NULL; + } +} + +static int +isCCITTCompression(TIFF* tif) +{ + uint16 compress; + TIFFGetField(tif, TIFFTAG_COMPRESSION, &compress); + return (compress == COMPRESSION_CCITTFAX3 || + compress == COMPRESSION_CCITTFAX4 || + compress == COMPRESSION_CCITTRLE || + compress == COMPRESSION_CCITTRLEW); +} + +int +TIFFRGBAImageBegin(TIFFRGBAImage* img, TIFF* tif, int stop, char emsg[1024]) +{ + uint16* sampleinfo; + uint16 extrasamples; + uint16 planarconfig; + uint16 compress; + int colorchannels; + uint16 *red_orig, *green_orig, *blue_orig; + int n_color; + + /* Initialize to normal values */ + img->row_offset = 0; + img->col_offset = 0; + img->redcmap = NULL; + img->greencmap = NULL; + img->bluecmap = NULL; + img->req_orientation = ORIENTATION_BOTLEFT; /* It is the default */ + + img->tif = tif; + img->stoponerr = stop; + TIFFGetFieldDefaulted(tif, TIFFTAG_BITSPERSAMPLE, &img->bitspersample); + switch (img->bitspersample) { + case 1: + case 2: + case 4: + case 8: + case 16: + break; + default: + sprintf(emsg, "Sorry, can not handle images with %d-bit samples", + img->bitspersample); + goto fail_return; + } + img->alpha = 0; + TIFFGetFieldDefaulted(tif, TIFFTAG_SAMPLESPERPIXEL, &img->samplesperpixel); + TIFFGetFieldDefaulted(tif, TIFFTAG_EXTRASAMPLES, + &extrasamples, &sampleinfo); + if (extrasamples >= 1) + { + switch (sampleinfo[0]) { + case EXTRASAMPLE_UNSPECIFIED: /* Workaround for some images without */ + if (img->samplesperpixel > 3) /* correct info about alpha channel */ + img->alpha = EXTRASAMPLE_ASSOCALPHA; + break; + case EXTRASAMPLE_ASSOCALPHA: /* data is pre-multiplied */ + case EXTRASAMPLE_UNASSALPHA: /* data is not pre-multiplied */ + img->alpha = sampleinfo[0]; + break; + } + } + +#ifdef DEFAULT_EXTRASAMPLE_AS_ALPHA + if( !TIFFGetField(tif, TIFFTAG_PHOTOMETRIC, &img->photometric)) + img->photometric = PHOTOMETRIC_MINISWHITE; + + if( extrasamples == 0 + && img->samplesperpixel == 4 + && img->photometric == PHOTOMETRIC_RGB ) + { + img->alpha = EXTRASAMPLE_ASSOCALPHA; + extrasamples = 1; + } +#endif + + colorchannels = img->samplesperpixel - extrasamples; + TIFFGetFieldDefaulted(tif, TIFFTAG_COMPRESSION, &compress); + TIFFGetFieldDefaulted(tif, TIFFTAG_PLANARCONFIG, &planarconfig); + if (!TIFFGetField(tif, TIFFTAG_PHOTOMETRIC, &img->photometric)) { + switch (colorchannels) { + case 1: + if (isCCITTCompression(tif)) + img->photometric = PHOTOMETRIC_MINISWHITE; + else + img->photometric = PHOTOMETRIC_MINISBLACK; + break; + case 3: + img->photometric = PHOTOMETRIC_RGB; + break; + default: + sprintf(emsg, "Missing needed %s tag", photoTag); + goto fail_return; + } + } + switch (img->photometric) { + case PHOTOMETRIC_PALETTE: + if (!TIFFGetField(tif, TIFFTAG_COLORMAP, + &red_orig, &green_orig, &blue_orig)) { + sprintf(emsg, "Missing required \"Colormap\" tag"); + goto fail_return; + } + + /* copy the colormaps so we can modify them */ + n_color = (1L << img->bitspersample); + img->redcmap = (uint16 *) _TIFFmalloc(sizeof(uint16)*n_color); + img->greencmap = (uint16 *) _TIFFmalloc(sizeof(uint16)*n_color); + img->bluecmap = (uint16 *) _TIFFmalloc(sizeof(uint16)*n_color); + if( !img->redcmap || !img->greencmap || !img->bluecmap ) { + sprintf(emsg, "Out of memory for colormap copy"); + goto fail_return; + } + + _TIFFmemcpy( img->redcmap, red_orig, n_color * 2 ); + _TIFFmemcpy( img->greencmap, green_orig, n_color * 2 ); + _TIFFmemcpy( img->bluecmap, blue_orig, n_color * 2 ); + + /* fall thru... */ + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + if (planarconfig == PLANARCONFIG_CONTIG + && img->samplesperpixel != 1 + && img->bitspersample < 8 ) { + sprintf(emsg, + "Sorry, can not handle contiguous data with %s=%d, " + "and %s=%d and Bits/Sample=%d", + photoTag, img->photometric, + "Samples/pixel", img->samplesperpixel, + img->bitspersample); + goto fail_return; + } + break; + case PHOTOMETRIC_YCBCR: + /* It would probably be nice to have a reality check here. */ + if (planarconfig == PLANARCONFIG_CONTIG) + /* can rely on libjpeg to convert to RGB */ + /* XXX should restore current state on exit */ + switch (compress) { + case COMPRESSION_JPEG: + /* + * TODO: when complete tests verify complete desubsampling + * and YCbCr handling, remove use of TIFFTAG_JPEGCOLORMODE in + * favor of tif_getimage.c native handling + */ + TIFFSetField(tif, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RGB); + img->photometric = PHOTOMETRIC_RGB; + break; + default: + /* do nothing */; + break; + } + /* + * TODO: if at all meaningful and useful, make more complete + * support check here, or better still, refactor to let supporting + * code decide whether there is support and what meaningfull + * error to return + */ + break; + case PHOTOMETRIC_RGB: + if (colorchannels < 3) { + sprintf(emsg, "Sorry, can not handle RGB image with %s=%d", + "Color channels", colorchannels); + goto fail_return; + } + break; + case PHOTOMETRIC_SEPARATED: + { + uint16 inkset; + TIFFGetFieldDefaulted(tif, TIFFTAG_INKSET, &inkset); + if (inkset != INKSET_CMYK) { + sprintf(emsg, "Sorry, can not handle separated image with %s=%d", + "InkSet", inkset); + goto fail_return; + } + if (img->samplesperpixel < 4) { + sprintf(emsg, "Sorry, can not handle separated image with %s=%d", + "Samples/pixel", img->samplesperpixel); + goto fail_return; + } + } + break; + case PHOTOMETRIC_LOGL: + if (compress != COMPRESSION_SGILOG) { + sprintf(emsg, "Sorry, LogL data must have %s=%d", + "Compression", COMPRESSION_SGILOG); + goto fail_return; + } + TIFFSetField(tif, TIFFTAG_SGILOGDATAFMT, SGILOGDATAFMT_8BIT); + img->photometric = PHOTOMETRIC_MINISBLACK; /* little white lie */ + img->bitspersample = 8; + break; + case PHOTOMETRIC_LOGLUV: + if (compress != COMPRESSION_SGILOG && compress != COMPRESSION_SGILOG24) { + sprintf(emsg, "Sorry, LogLuv data must have %s=%d or %d", + "Compression", COMPRESSION_SGILOG, COMPRESSION_SGILOG24); + goto fail_return; + } + if (planarconfig != PLANARCONFIG_CONTIG) { + sprintf(emsg, "Sorry, can not handle LogLuv images with %s=%d", + "Planarconfiguration", planarconfig); + return (0); + } + TIFFSetField(tif, TIFFTAG_SGILOGDATAFMT, SGILOGDATAFMT_8BIT); + img->photometric = PHOTOMETRIC_RGB; /* little white lie */ + img->bitspersample = 8; + break; + case PHOTOMETRIC_CIELAB: + break; + default: + sprintf(emsg, "Sorry, can not handle image with %s=%d", + photoTag, img->photometric); + goto fail_return; + } + img->Map = NULL; + img->BWmap = NULL; + img->PALmap = NULL; + img->ycbcr = NULL; + img->cielab = NULL; + img->UaToAa = NULL; + img->Bitdepth16To8 = NULL; + TIFFGetField(tif, TIFFTAG_IMAGEWIDTH, &img->width); + TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &img->height); + TIFFGetFieldDefaulted(tif, TIFFTAG_ORIENTATION, &img->orientation); + img->isContig = + !(planarconfig == PLANARCONFIG_SEPARATE && img->samplesperpixel > 1); + if (img->isContig) { + if (!PickContigCase(img)) { + sprintf(emsg, "Sorry, can not handle image"); + goto fail_return; + } + } else { + if (!PickSeparateCase(img)) { + sprintf(emsg, "Sorry, can not handle image"); + goto fail_return; + } + } + return 1; + + fail_return: + _TIFFfree( img->redcmap ); + _TIFFfree( img->greencmap ); + _TIFFfree( img->bluecmap ); + img->redcmap = img->greencmap = img->bluecmap = NULL; + return 0; +} + +int +TIFFRGBAImageGet(TIFFRGBAImage* img, uint32* raster, uint32 w, uint32 h) +{ + if (img->get == NULL) { + TIFFErrorExt(img->tif->tif_clientdata, TIFFFileName(img->tif), "No \"get\" routine setup"); + return (0); + } + if (img->put.any == NULL) { + TIFFErrorExt(img->tif->tif_clientdata, TIFFFileName(img->tif), + "No \"put\" routine setupl; probably can not handle image format"); + return (0); + } + return (*img->get)(img, raster, w, h); +} + +/* + * Read the specified image into an ABGR-format rastertaking in account + * specified orientation. + */ +int +TIFFReadRGBAImageOriented(TIFF* tif, + uint32 rwidth, uint32 rheight, uint32* raster, + int orientation, int stop) +{ + char emsg[1024] = ""; + TIFFRGBAImage img; + int ok; + + if (TIFFRGBAImageOK(tif, emsg) && TIFFRGBAImageBegin(&img, tif, stop, emsg)) { + img.req_orientation = orientation; + /* XXX verify rwidth and rheight against width and height */ + ok = TIFFRGBAImageGet(&img, raster+(rheight-img.height)*rwidth, + rwidth, img.height); + TIFFRGBAImageEnd(&img); + } else { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "%s", emsg); + ok = 0; + } + return (ok); +} + +/* + * Read the specified image into an ABGR-format raster. Use bottom left + * origin for raster by default. + */ +int +TIFFReadRGBAImage(TIFF* tif, + uint32 rwidth, uint32 rheight, uint32* raster, int stop) +{ + return TIFFReadRGBAImageOriented(tif, rwidth, rheight, raster, + ORIENTATION_BOTLEFT, stop); +} + +static int +setorientation(TIFFRGBAImage* img) +{ + switch (img->orientation) { + case ORIENTATION_TOPLEFT: + case ORIENTATION_LEFTTOP: + if (img->req_orientation == ORIENTATION_TOPRIGHT || + img->req_orientation == ORIENTATION_RIGHTTOP) + return FLIP_HORIZONTALLY; + else if (img->req_orientation == ORIENTATION_BOTRIGHT || + img->req_orientation == ORIENTATION_RIGHTBOT) + return FLIP_HORIZONTALLY | FLIP_VERTICALLY; + else if (img->req_orientation == ORIENTATION_BOTLEFT || + img->req_orientation == ORIENTATION_LEFTBOT) + return FLIP_VERTICALLY; + else + return 0; + case ORIENTATION_TOPRIGHT: + case ORIENTATION_RIGHTTOP: + if (img->req_orientation == ORIENTATION_TOPLEFT || + img->req_orientation == ORIENTATION_LEFTTOP) + return FLIP_HORIZONTALLY; + else if (img->req_orientation == ORIENTATION_BOTRIGHT || + img->req_orientation == ORIENTATION_RIGHTBOT) + return FLIP_VERTICALLY; + else if (img->req_orientation == ORIENTATION_BOTLEFT || + img->req_orientation == ORIENTATION_LEFTBOT) + return FLIP_HORIZONTALLY | FLIP_VERTICALLY; + else + return 0; + case ORIENTATION_BOTRIGHT: + case ORIENTATION_RIGHTBOT: + if (img->req_orientation == ORIENTATION_TOPLEFT || + img->req_orientation == ORIENTATION_LEFTTOP) + return FLIP_HORIZONTALLY | FLIP_VERTICALLY; + else if (img->req_orientation == ORIENTATION_TOPRIGHT || + img->req_orientation == ORIENTATION_RIGHTTOP) + return FLIP_VERTICALLY; + else if (img->req_orientation == ORIENTATION_BOTLEFT || + img->req_orientation == ORIENTATION_LEFTBOT) + return FLIP_HORIZONTALLY; + else + return 0; + case ORIENTATION_BOTLEFT: + case ORIENTATION_LEFTBOT: + if (img->req_orientation == ORIENTATION_TOPLEFT || + img->req_orientation == ORIENTATION_LEFTTOP) + return FLIP_VERTICALLY; + else if (img->req_orientation == ORIENTATION_TOPRIGHT || + img->req_orientation == ORIENTATION_RIGHTTOP) + return FLIP_HORIZONTALLY | FLIP_VERTICALLY; + else if (img->req_orientation == ORIENTATION_BOTRIGHT || + img->req_orientation == ORIENTATION_RIGHTBOT) + return FLIP_HORIZONTALLY; + else + return 0; + default: /* NOTREACHED */ + return 0; + } +} + +/* + * Get an tile-organized image that has + * PlanarConfiguration contiguous if SamplesPerPixel > 1 + * or + * SamplesPerPixel == 1 + */ +static int +gtTileContig(TIFFRGBAImage* img, uint32* raster, uint32 w, uint32 h) +{ + TIFF* tif = img->tif; + tileContigRoutine put = img->put.contig; + uint32 col, row, y, rowstoread; + tmsize_t pos; + uint32 tw, th; + unsigned char* buf; + int32 fromskew, toskew; + uint32 nrow; + int ret = 1, flip; + + buf = (unsigned char*) _TIFFmalloc(TIFFTileSize(tif)); + if (buf == 0) { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "%s", "No space for tile buffer"); + return (0); + } + _TIFFmemset(buf, 0, TIFFTileSize(tif)); + TIFFGetField(tif, TIFFTAG_TILEWIDTH, &tw); + TIFFGetField(tif, TIFFTAG_TILELENGTH, &th); + + flip = setorientation(img); + if (flip & FLIP_VERTICALLY) { + y = h - 1; + toskew = -(int32)(tw + w); + } + else { + y = 0; + toskew = -(int32)(tw - w); + } + + for (row = 0; row < h; row += nrow) + { + rowstoread = th - (row + img->row_offset) % th; + nrow = (row + rowstoread > h ? h - row : rowstoread); + for (col = 0; col < w; col += tw) + { + if (TIFFReadTile(tif, buf, col+img->col_offset, + row+img->row_offset, 0, 0)==(tmsize_t)(-1) && img->stoponerr) + { + ret = 0; + break; + } + + pos = ((row+img->row_offset) % th) * TIFFTileRowSize(tif); + + if (col + tw > w) + { + /* + * Tile is clipped horizontally. Calculate + * visible portion and skewing factors. + */ + uint32 npix = w - col; + fromskew = tw - npix; + (*put)(img, raster+y*w+col, col, y, + npix, nrow, fromskew, toskew + fromskew, buf + pos); + } + else + { + (*put)(img, raster+y*w+col, col, y, tw, nrow, 0, toskew, buf + pos); + } + } + + y += (flip & FLIP_VERTICALLY ? -(int32) nrow : (int32) nrow); + } + _TIFFfree(buf); + + if (flip & FLIP_HORIZONTALLY) { + uint32 line; + + for (line = 0; line < h; line++) { + uint32 *left = raster + (line * w); + uint32 *right = left + w - 1; + + while ( left < right ) { + uint32 temp = *left; + *left = *right; + *right = temp; + left++, right--; + } + } + } + + return (ret); +} + +/* + * Get an tile-organized image that has + * SamplesPerPixel > 1 + * PlanarConfiguration separated + * We assume that all such images are RGB. + */ +static int +gtTileSeparate(TIFFRGBAImage* img, uint32* raster, uint32 w, uint32 h) +{ + TIFF* tif = img->tif; + tileSeparateRoutine put = img->put.separate; + uint32 col, row, y, rowstoread; + tmsize_t pos; + uint32 tw, th; + unsigned char* buf; + unsigned char* p0; + unsigned char* p1; + unsigned char* p2; + unsigned char* pa; + tmsize_t tilesize; + tmsize_t bufsize; + int32 fromskew, toskew; + int alpha = img->alpha; + uint32 nrow; + int ret = 1, flip; + int colorchannels; + + tilesize = TIFFTileSize(tif); + bufsize = TIFFSafeMultiply(tmsize_t,alpha?4:3,tilesize); + if (bufsize == 0) { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "Integer overflow in %s", "gtTileSeparate"); + return (0); + } + buf = (unsigned char*) _TIFFmalloc(bufsize); + if (buf == 0) { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "%s", "No space for tile buffer"); + return (0); + } + _TIFFmemset(buf, 0, bufsize); + p0 = buf; + p1 = p0 + tilesize; + p2 = p1 + tilesize; + pa = (alpha?(p2+tilesize):NULL); + TIFFGetField(tif, TIFFTAG_TILEWIDTH, &tw); + TIFFGetField(tif, TIFFTAG_TILELENGTH, &th); + + flip = setorientation(img); + if (flip & FLIP_VERTICALLY) { + y = h - 1; + toskew = -(int32)(tw + w); + } + else { + y = 0; + toskew = -(int32)(tw - w); + } + + switch( img->photometric ) + { + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + case PHOTOMETRIC_PALETTE: + colorchannels = 1; + p2 = p1 = p0; + break; + + default: + colorchannels = 3; + break; + } + + for (row = 0; row < h; row += nrow) + { + rowstoread = th - (row + img->row_offset) % th; + nrow = (row + rowstoread > h ? h - row : rowstoread); + for (col = 0; col < w; col += tw) + { + if (TIFFReadTile(tif, p0, col+img->col_offset, + row+img->row_offset,0,0)==(tmsize_t)(-1) && img->stoponerr) + { + ret = 0; + break; + } + if (colorchannels > 1 + && TIFFReadTile(tif, p1, col+img->col_offset, + row+img->row_offset,0,1) == (tmsize_t)(-1) + && img->stoponerr) + { + ret = 0; + break; + } + if (colorchannels > 1 + && TIFFReadTile(tif, p2, col+img->col_offset, + row+img->row_offset,0,2) == (tmsize_t)(-1) + && img->stoponerr) + { + ret = 0; + break; + } + if (alpha + && TIFFReadTile(tif,pa,col+img->col_offset, + row+img->row_offset,0,colorchannels) == (tmsize_t)(-1) + && img->stoponerr) + { + ret = 0; + break; + } + + pos = ((row+img->row_offset) % th) * TIFFTileRowSize(tif); + + if (col + tw > w) + { + /* + * Tile is clipped horizontally. Calculate + * visible portion and skewing factors. + */ + uint32 npix = w - col; + fromskew = tw - npix; + (*put)(img, raster+y*w+col, col, y, + npix, nrow, fromskew, toskew + fromskew, + p0 + pos, p1 + pos, p2 + pos, (alpha?(pa+pos):NULL)); + } else { + (*put)(img, raster+y*w+col, col, y, + tw, nrow, 0, toskew, p0 + pos, p1 + pos, p2 + pos, (alpha?(pa+pos):NULL)); + } + } + + y += (flip & FLIP_VERTICALLY ?-(int32) nrow : (int32) nrow); + } + + if (flip & FLIP_HORIZONTALLY) { + uint32 line; + + for (line = 0; line < h; line++) { + uint32 *left = raster + (line * w); + uint32 *right = left + w - 1; + + while ( left < right ) { + uint32 temp = *left; + *left = *right; + *right = temp; + left++, right--; + } + } + } + + _TIFFfree(buf); + return (ret); +} + +/* + * Get a strip-organized image that has + * PlanarConfiguration contiguous if SamplesPerPixel > 1 + * or + * SamplesPerPixel == 1 + */ +static int +gtStripContig(TIFFRGBAImage* img, uint32* raster, uint32 w, uint32 h) +{ + TIFF* tif = img->tif; + tileContigRoutine put = img->put.contig; + uint32 row, y, nrow, nrowsub, rowstoread; + tmsize_t pos; + unsigned char* buf; + uint32 rowsperstrip; + uint16 subsamplinghor,subsamplingver; + uint32 imagewidth = img->width; + tmsize_t scanline; + int32 fromskew, toskew; + int ret = 1, flip; + + buf = (unsigned char*) _TIFFmalloc(TIFFStripSize(tif)); + if (buf == 0) { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "No space for strip buffer"); + return (0); + } + _TIFFmemset(buf, 0, TIFFStripSize(tif)); + + flip = setorientation(img); + if (flip & FLIP_VERTICALLY) { + y = h - 1; + toskew = -(int32)(w + w); + } else { + y = 0; + toskew = -(int32)(w - w); + } + + TIFFGetFieldDefaulted(tif, TIFFTAG_ROWSPERSTRIP, &rowsperstrip); + TIFFGetFieldDefaulted(tif, TIFFTAG_YCBCRSUBSAMPLING, &subsamplinghor, &subsamplingver); + scanline = TIFFScanlineSize(tif); + fromskew = (w < imagewidth ? imagewidth - w : 0); + for (row = 0; row < h; row += nrow) + { + rowstoread = rowsperstrip - (row + img->row_offset) % rowsperstrip; + nrow = (row + rowstoread > h ? h - row : rowstoread); + nrowsub = nrow; + if ((nrowsub%subsamplingver)!=0) + nrowsub+=subsamplingver-nrowsub%subsamplingver; + if (TIFFReadEncodedStrip(tif, + TIFFComputeStrip(tif,row+img->row_offset, 0), + buf, + ((row + img->row_offset)%rowsperstrip + nrowsub) * scanline)==(tmsize_t)(-1) + && img->stoponerr) + { + ret = 0; + break; + } + + pos = ((row + img->row_offset) % rowsperstrip) * scanline; + (*put)(img, raster+y*w, 0, y, w, nrow, fromskew, toskew, buf + pos); + y += (flip & FLIP_VERTICALLY ? -(int32) nrow : (int32) nrow); + } + + if (flip & FLIP_HORIZONTALLY) { + uint32 line; + + for (line = 0; line < h; line++) { + uint32 *left = raster + (line * w); + uint32 *right = left + w - 1; + + while ( left < right ) { + uint32 temp = *left; + *left = *right; + *right = temp; + left++, right--; + } + } + } + + _TIFFfree(buf); + return (ret); +} + +/* + * Get a strip-organized image with + * SamplesPerPixel > 1 + * PlanarConfiguration separated + * We assume that all such images are RGB. + */ +static int +gtStripSeparate(TIFFRGBAImage* img, uint32* raster, uint32 w, uint32 h) +{ + TIFF* tif = img->tif; + tileSeparateRoutine put = img->put.separate; + unsigned char *buf; + unsigned char *p0, *p1, *p2, *pa; + uint32 row, y, nrow, rowstoread; + tmsize_t pos; + tmsize_t scanline; + uint32 rowsperstrip, offset_row; + uint32 imagewidth = img->width; + tmsize_t stripsize; + tmsize_t bufsize; + int32 fromskew, toskew; + int alpha = img->alpha; + int ret = 1, flip, colorchannels; + + stripsize = TIFFStripSize(tif); + bufsize = TIFFSafeMultiply(tmsize_t,alpha?4:3,stripsize); + if (bufsize == 0) { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "Integer overflow in %s", "gtStripSeparate"); + return (0); + } + p0 = buf = (unsigned char *)_TIFFmalloc(bufsize); + if (buf == 0) { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "No space for tile buffer"); + return (0); + } + _TIFFmemset(buf, 0, bufsize); + p1 = p0 + stripsize; + p2 = p1 + stripsize; + pa = (alpha?(p2+stripsize):NULL); + + flip = setorientation(img); + if (flip & FLIP_VERTICALLY) { + y = h - 1; + toskew = -(int32)(w + w); + } + else { + y = 0; + toskew = -(int32)(w - w); + } + + switch( img->photometric ) + { + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + case PHOTOMETRIC_PALETTE: + colorchannels = 1; + p2 = p1 = p0; + break; + + default: + colorchannels = 3; + break; + } + + TIFFGetFieldDefaulted(tif, TIFFTAG_ROWSPERSTRIP, &rowsperstrip); + scanline = TIFFScanlineSize(tif); + fromskew = (w < imagewidth ? imagewidth - w : 0); + for (row = 0; row < h; row += nrow) + { + rowstoread = rowsperstrip - (row + img->row_offset) % rowsperstrip; + nrow = (row + rowstoread > h ? h - row : rowstoread); + offset_row = row + img->row_offset; + if (TIFFReadEncodedStrip(tif, TIFFComputeStrip(tif, offset_row, 0), + p0, ((row + img->row_offset)%rowsperstrip + nrow) * scanline)==(tmsize_t)(-1) + && img->stoponerr) + { + ret = 0; + break; + } + if (colorchannels > 1 + && TIFFReadEncodedStrip(tif, TIFFComputeStrip(tif, offset_row, 1), + p1, ((row + img->row_offset)%rowsperstrip + nrow) * scanline) == (tmsize_t)(-1) + && img->stoponerr) + { + ret = 0; + break; + } + if (colorchannels > 1 + && TIFFReadEncodedStrip(tif, TIFFComputeStrip(tif, offset_row, 2), + p2, ((row + img->row_offset)%rowsperstrip + nrow) * scanline) == (tmsize_t)(-1) + && img->stoponerr) + { + ret = 0; + break; + } + if (alpha) + { + if (TIFFReadEncodedStrip(tif, TIFFComputeStrip(tif, offset_row, colorchannels), + pa, ((row + img->row_offset)%rowsperstrip + nrow) * scanline)==(tmsize_t)(-1) + && img->stoponerr) + { + ret = 0; + break; + } + } + + pos = ((row + img->row_offset) % rowsperstrip) * scanline; + (*put)(img, raster+y*w, 0, y, w, nrow, fromskew, toskew, p0 + pos, p1 + pos, + p2 + pos, (alpha?(pa+pos):NULL)); + y += (flip & FLIP_VERTICALLY ? -(int32) nrow : (int32) nrow); + } + + if (flip & FLIP_HORIZONTALLY) { + uint32 line; + + for (line = 0; line < h; line++) { + uint32 *left = raster + (line * w); + uint32 *right = left + w - 1; + + while ( left < right ) { + uint32 temp = *left; + *left = *right; + *right = temp; + left++, right--; + } + } + } + + _TIFFfree(buf); + return (ret); +} + +/* + * The following routines move decoded data returned + * from the TIFF library into rasters filled with packed + * ABGR pixels (i.e. suitable for passing to lrecwrite.) + * + * The routines have been created according to the most + * important cases and optimized. PickContigCase and + * PickSeparateCase analyze the parameters and select + * the appropriate "get" and "put" routine to use. + */ +#define REPEAT8(op) REPEAT4(op); REPEAT4(op) +#define REPEAT4(op) REPEAT2(op); REPEAT2(op) +#define REPEAT2(op) op; op +#define CASE8(x,op) \ + switch (x) { \ + case 7: op; case 6: op; case 5: op; \ + case 4: op; case 3: op; case 2: op; \ + case 1: op; \ + } +#define CASE4(x,op) switch (x) { case 3: op; case 2: op; case 1: op; } +#define NOP + +#define UNROLL8(w, op1, op2) { \ + uint32 _x; \ + for (_x = w; _x >= 8; _x -= 8) { \ + op1; \ + REPEAT8(op2); \ + } \ + if (_x > 0) { \ + op1; \ + CASE8(_x,op2); \ + } \ +} +#define UNROLL4(w, op1, op2) { \ + uint32 _x; \ + for (_x = w; _x >= 4; _x -= 4) { \ + op1; \ + REPEAT4(op2); \ + } \ + if (_x > 0) { \ + op1; \ + CASE4(_x,op2); \ + } \ +} +#define UNROLL2(w, op1, op2) { \ + uint32 _x; \ + for (_x = w; _x >= 2; _x -= 2) { \ + op1; \ + REPEAT2(op2); \ + } \ + if (_x) { \ + op1; \ + op2; \ + } \ +} + +#define SKEW(r,g,b,skew) { r += skew; g += skew; b += skew; } +#define SKEW4(r,g,b,a,skew) { r += skew; g += skew; b += skew; a+= skew; } + +#define A1 (((uint32)0xffL)<<24) +#define PACK(r,g,b) \ + ((uint32)(r)|((uint32)(g)<<8)|((uint32)(b)<<16)|A1) +#define PACK4(r,g,b,a) \ + ((uint32)(r)|((uint32)(g)<<8)|((uint32)(b)<<16)|((uint32)(a)<<24)) +#define W2B(v) (((v)>>8)&0xff) +/* TODO: PACKW should have be made redundant in favor of Bitdepth16To8 LUT */ +#define PACKW(r,g,b) \ + ((uint32)W2B(r)|((uint32)W2B(g)<<8)|((uint32)W2B(b)<<16)|A1) +#define PACKW4(r,g,b,a) \ + ((uint32)W2B(r)|((uint32)W2B(g)<<8)|((uint32)W2B(b)<<16)|((uint32)W2B(a)<<24)) + +#define DECLAREContigPutFunc(name) \ +static void name(\ + TIFFRGBAImage* img, \ + uint32* cp, \ + uint32 x, uint32 y, \ + uint32 w, uint32 h, \ + int32 fromskew, int32 toskew, \ + unsigned char* pp \ +) + +/* + * 8-bit palette => colormap/RGB + */ +DECLAREContigPutFunc(put8bitcmaptile) +{ + uint32** PALmap = img->PALmap; + int samplesperpixel = img->samplesperpixel; + + (void) y; + while (h-- > 0) { + for (x = w; x-- > 0;) + { + *cp++ = PALmap[*pp][0]; + pp += samplesperpixel; + } + cp += toskew; + pp += fromskew; + } +} + +/* + * 4-bit palette => colormap/RGB + */ +DECLAREContigPutFunc(put4bitcmaptile) +{ + uint32** PALmap = img->PALmap; + + (void) x; (void) y; + fromskew /= 2; + while (h-- > 0) { + uint32* bw; + UNROLL2(w, bw = PALmap[*pp++], *cp++ = *bw++); + cp += toskew; + pp += fromskew; + } +} + +/* + * 2-bit palette => colormap/RGB + */ +DECLAREContigPutFunc(put2bitcmaptile) +{ + uint32** PALmap = img->PALmap; + + (void) x; (void) y; + fromskew /= 4; + while (h-- > 0) { + uint32* bw; + UNROLL4(w, bw = PALmap[*pp++], *cp++ = *bw++); + cp += toskew; + pp += fromskew; + } +} + +/* + * 1-bit palette => colormap/RGB + */ +DECLAREContigPutFunc(put1bitcmaptile) +{ + uint32** PALmap = img->PALmap; + + (void) x; (void) y; + fromskew /= 8; + while (h-- > 0) { + uint32* bw; + UNROLL8(w, bw = PALmap[*pp++], *cp++ = *bw++); + cp += toskew; + pp += fromskew; + } +} + +/* + * 8-bit greyscale => colormap/RGB + */ +DECLAREContigPutFunc(putgreytile) +{ + int samplesperpixel = img->samplesperpixel; + uint32** BWmap = img->BWmap; + + (void) y; + while (h-- > 0) { + for (x = w; x-- > 0;) + { + *cp++ = BWmap[*pp][0]; + pp += samplesperpixel; + } + cp += toskew; + pp += fromskew; + } +} + +/* + * 8-bit greyscale with associated alpha => colormap/RGBA + */ +DECLAREContigPutFunc(putagreytile) +{ + int samplesperpixel = img->samplesperpixel; + uint32** BWmap = img->BWmap; + + (void) y; + while (h-- > 0) { + for (x = w; x-- > 0;) + { + *cp++ = BWmap[*pp][0] & (*(pp+1) << 24 | ~A1); + pp += samplesperpixel; + } + cp += toskew; + pp += fromskew; + } +} + +/* + * 16-bit greyscale => colormap/RGB + */ +DECLAREContigPutFunc(put16bitbwtile) +{ + int samplesperpixel = img->samplesperpixel; + uint32** BWmap = img->BWmap; + + (void) y; + while (h-- > 0) { + uint16 *wp = (uint16 *) pp; + + for (x = w; x-- > 0;) + { + /* use high order byte of 16bit value */ + + *cp++ = BWmap[*wp >> 8][0]; + pp += 2 * samplesperpixel; + wp += samplesperpixel; + } + cp += toskew; + pp += fromskew; + } +} + +/* + * 1-bit bilevel => colormap/RGB + */ +DECLAREContigPutFunc(put1bitbwtile) +{ + uint32** BWmap = img->BWmap; + + (void) x; (void) y; + fromskew /= 8; + while (h-- > 0) { + uint32* bw; + UNROLL8(w, bw = BWmap[*pp++], *cp++ = *bw++); + cp += toskew; + pp += fromskew; + } +} + +/* + * 2-bit greyscale => colormap/RGB + */ +DECLAREContigPutFunc(put2bitbwtile) +{ + uint32** BWmap = img->BWmap; + + (void) x; (void) y; + fromskew /= 4; + while (h-- > 0) { + uint32* bw; + UNROLL4(w, bw = BWmap[*pp++], *cp++ = *bw++); + cp += toskew; + pp += fromskew; + } +} + +/* + * 4-bit greyscale => colormap/RGB + */ +DECLAREContigPutFunc(put4bitbwtile) +{ + uint32** BWmap = img->BWmap; + + (void) x; (void) y; + fromskew /= 2; + while (h-- > 0) { + uint32* bw; + UNROLL2(w, bw = BWmap[*pp++], *cp++ = *bw++); + cp += toskew; + pp += fromskew; + } +} + +/* + * 8-bit packed samples, no Map => RGB + */ +DECLAREContigPutFunc(putRGBcontig8bittile) +{ + int samplesperpixel = img->samplesperpixel; + + (void) x; (void) y; + fromskew *= samplesperpixel; + while (h-- > 0) { + UNROLL8(w, NOP, + *cp++ = PACK(pp[0], pp[1], pp[2]); + pp += samplesperpixel); + cp += toskew; + pp += fromskew; + } +} + +/* + * 8-bit packed samples => RGBA w/ associated alpha + * (known to have Map == NULL) + */ +DECLAREContigPutFunc(putRGBAAcontig8bittile) +{ + int samplesperpixel = img->samplesperpixel; + + (void) x; (void) y; + fromskew *= samplesperpixel; + while (h-- > 0) { + UNROLL8(w, NOP, + *cp++ = PACK4(pp[0], pp[1], pp[2], pp[3]); + pp += samplesperpixel); + cp += toskew; + pp += fromskew; + } +} + +/* + * 8-bit packed samples => RGBA w/ unassociated alpha + * (known to have Map == NULL) + */ +DECLAREContigPutFunc(putRGBUAcontig8bittile) +{ + int samplesperpixel = img->samplesperpixel; + (void) y; + fromskew *= samplesperpixel; + while (h-- > 0) { + uint32 r, g, b, a; + uint8* m; + for (x = w; x-- > 0;) { + a = pp[3]; + m = img->UaToAa+(a<<8); + r = m[pp[0]]; + g = m[pp[1]]; + b = m[pp[2]]; + *cp++ = PACK4(r,g,b,a); + pp += samplesperpixel; + } + cp += toskew; + pp += fromskew; + } +} + +/* + * 16-bit packed samples => RGB + */ +DECLAREContigPutFunc(putRGBcontig16bittile) +{ + int samplesperpixel = img->samplesperpixel; + uint16 *wp = (uint16 *)pp; + (void) y; + fromskew *= samplesperpixel; + while (h-- > 0) { + for (x = w; x-- > 0;) { + *cp++ = PACK(img->Bitdepth16To8[wp[0]], + img->Bitdepth16To8[wp[1]], + img->Bitdepth16To8[wp[2]]); + wp += samplesperpixel; + } + cp += toskew; + wp += fromskew; + } +} + +/* + * 16-bit packed samples => RGBA w/ associated alpha + * (known to have Map == NULL) + */ +DECLAREContigPutFunc(putRGBAAcontig16bittile) +{ + int samplesperpixel = img->samplesperpixel; + uint16 *wp = (uint16 *)pp; + (void) y; + fromskew *= samplesperpixel; + while (h-- > 0) { + for (x = w; x-- > 0;) { + *cp++ = PACK4(img->Bitdepth16To8[wp[0]], + img->Bitdepth16To8[wp[1]], + img->Bitdepth16To8[wp[2]], + img->Bitdepth16To8[wp[3]]); + wp += samplesperpixel; + } + cp += toskew; + wp += fromskew; + } +} + +/* + * 16-bit packed samples => RGBA w/ unassociated alpha + * (known to have Map == NULL) + */ +DECLAREContigPutFunc(putRGBUAcontig16bittile) +{ + int samplesperpixel = img->samplesperpixel; + uint16 *wp = (uint16 *)pp; + (void) y; + fromskew *= samplesperpixel; + while (h-- > 0) { + uint32 r,g,b,a; + uint8* m; + for (x = w; x-- > 0;) { + a = img->Bitdepth16To8[wp[3]]; + m = img->UaToAa+(a<<8); + r = m[img->Bitdepth16To8[wp[0]]]; + g = m[img->Bitdepth16To8[wp[1]]]; + b = m[img->Bitdepth16To8[wp[2]]]; + *cp++ = PACK4(r,g,b,a); + wp += samplesperpixel; + } + cp += toskew; + wp += fromskew; + } +} + +/* + * 8-bit packed CMYK samples w/o Map => RGB + * + * NB: The conversion of CMYK->RGB is *very* crude. + */ +DECLAREContigPutFunc(putRGBcontig8bitCMYKtile) +{ + int samplesperpixel = img->samplesperpixel; + uint16 r, g, b, k; + + (void) x; (void) y; + fromskew *= samplesperpixel; + while (h-- > 0) { + UNROLL8(w, NOP, + k = 255 - pp[3]; + r = (k*(255-pp[0]))/255; + g = (k*(255-pp[1]))/255; + b = (k*(255-pp[2]))/255; + *cp++ = PACK(r, g, b); + pp += samplesperpixel); + cp += toskew; + pp += fromskew; + } +} + +/* + * 8-bit packed CMYK samples w/Map => RGB + * + * NB: The conversion of CMYK->RGB is *very* crude. + */ +DECLAREContigPutFunc(putRGBcontig8bitCMYKMaptile) +{ + int samplesperpixel = img->samplesperpixel; + TIFFRGBValue* Map = img->Map; + uint16 r, g, b, k; + + (void) y; + fromskew *= samplesperpixel; + while (h-- > 0) { + for (x = w; x-- > 0;) { + k = 255 - pp[3]; + r = (k*(255-pp[0]))/255; + g = (k*(255-pp[1]))/255; + b = (k*(255-pp[2]))/255; + *cp++ = PACK(Map[r], Map[g], Map[b]); + pp += samplesperpixel; + } + pp += fromskew; + cp += toskew; + } +} + +#define DECLARESepPutFunc(name) \ +static void name(\ + TIFFRGBAImage* img,\ + uint32* cp,\ + uint32 x, uint32 y, \ + uint32 w, uint32 h,\ + int32 fromskew, int32 toskew,\ + unsigned char* r, unsigned char* g, unsigned char* b, unsigned char* a\ +) + +/* + * 8-bit unpacked samples => RGB + */ +DECLARESepPutFunc(putRGBseparate8bittile) +{ + (void) img; (void) x; (void) y; (void) a; + while (h-- > 0) { + UNROLL8(w, NOP, *cp++ = PACK(*r++, *g++, *b++)); + SKEW(r, g, b, fromskew); + cp += toskew; + } +} + +/* + * 8-bit unpacked samples => RGBA w/ associated alpha + */ +DECLARESepPutFunc(putRGBAAseparate8bittile) +{ + (void) img; (void) x; (void) y; + while (h-- > 0) { + UNROLL8(w, NOP, *cp++ = PACK4(*r++, *g++, *b++, *a++)); + SKEW4(r, g, b, a, fromskew); + cp += toskew; + } +} + +/* + * 8-bit unpacked CMYK samples => RGBA + */ +DECLARESepPutFunc(putCMYKseparate8bittile) +{ + (void) img; (void) y; + while (h-- > 0) { + uint32 rv, gv, bv, kv; + for (x = w; x-- > 0;) { + kv = 255 - *a++; + rv = (kv*(255-*r++))/255; + gv = (kv*(255-*g++))/255; + bv = (kv*(255-*b++))/255; + *cp++ = PACK4(rv,gv,bv,255); + } + SKEW4(r, g, b, a, fromskew); + cp += toskew; + } +} + +/* + * 8-bit unpacked samples => RGBA w/ unassociated alpha + */ +DECLARESepPutFunc(putRGBUAseparate8bittile) +{ + (void) img; (void) y; + while (h-- > 0) { + uint32 rv, gv, bv, av; + uint8* m; + for (x = w; x-- > 0;) { + av = *a++; + m = img->UaToAa+(av<<8); + rv = m[*r++]; + gv = m[*g++]; + bv = m[*b++]; + *cp++ = PACK4(rv,gv,bv,av); + } + SKEW4(r, g, b, a, fromskew); + cp += toskew; + } +} + +/* + * 16-bit unpacked samples => RGB + */ +DECLARESepPutFunc(putRGBseparate16bittile) +{ + uint16 *wr = (uint16*) r; + uint16 *wg = (uint16*) g; + uint16 *wb = (uint16*) b; + (void) img; (void) y; (void) a; + while (h-- > 0) { + for (x = 0; x < w; x++) + *cp++ = PACK(img->Bitdepth16To8[*wr++], + img->Bitdepth16To8[*wg++], + img->Bitdepth16To8[*wb++]); + SKEW(wr, wg, wb, fromskew); + cp += toskew; + } +} + +/* + * 16-bit unpacked samples => RGBA w/ associated alpha + */ +DECLARESepPutFunc(putRGBAAseparate16bittile) +{ + uint16 *wr = (uint16*) r; + uint16 *wg = (uint16*) g; + uint16 *wb = (uint16*) b; + uint16 *wa = (uint16*) a; + (void) img; (void) y; + while (h-- > 0) { + for (x = 0; x < w; x++) + *cp++ = PACK4(img->Bitdepth16To8[*wr++], + img->Bitdepth16To8[*wg++], + img->Bitdepth16To8[*wb++], + img->Bitdepth16To8[*wa++]); + SKEW4(wr, wg, wb, wa, fromskew); + cp += toskew; + } +} + +/* + * 16-bit unpacked samples => RGBA w/ unassociated alpha + */ +DECLARESepPutFunc(putRGBUAseparate16bittile) +{ + uint16 *wr = (uint16*) r; + uint16 *wg = (uint16*) g; + uint16 *wb = (uint16*) b; + uint16 *wa = (uint16*) a; + (void) img; (void) y; + while (h-- > 0) { + uint32 r,g,b,a; + uint8* m; + for (x = w; x-- > 0;) { + a = img->Bitdepth16To8[*wa++]; + m = img->UaToAa+(a<<8); + r = m[img->Bitdepth16To8[*wr++]]; + g = m[img->Bitdepth16To8[*wg++]]; + b = m[img->Bitdepth16To8[*wb++]]; + *cp++ = PACK4(r,g,b,a); + } + SKEW4(wr, wg, wb, wa, fromskew); + cp += toskew; + } +} + +/* + * 8-bit packed CIE L*a*b 1976 samples => RGB + */ +DECLAREContigPutFunc(putcontig8bitCIELab) +{ + float X, Y, Z; + uint32 r, g, b; + (void) y; + fromskew *= 3; + while (h-- > 0) { + for (x = w; x-- > 0;) { + TIFFCIELabToXYZ(img->cielab, + (unsigned char)pp[0], + (signed char)pp[1], + (signed char)pp[2], + &X, &Y, &Z); + TIFFXYZToRGB(img->cielab, X, Y, Z, &r, &g, &b); + *cp++ = PACK(r, g, b); + pp += 3; + } + cp += toskew; + pp += fromskew; + } +} + +/* + * YCbCr -> RGB conversion and packing routines. + */ + +#define YCbCrtoRGB(dst, Y) { \ + uint32 r, g, b; \ + TIFFYCbCrtoRGB(img->ycbcr, (Y), Cb, Cr, &r, &g, &b); \ + dst = PACK(r, g, b); \ +} + +/* + * 8-bit packed YCbCr samples => RGB + * This function is generic for different sampling sizes, + * and can handle blocks sizes that aren't multiples of the + * sampling size. However, it is substantially less optimized + * than the specific sampling cases. It is used as a fallback + * for difficult blocks. + */ +#ifdef notdef +static void putcontig8bitYCbCrGenericTile( + TIFFRGBAImage* img, + uint32* cp, + uint32 x, uint32 y, + uint32 w, uint32 h, + int32 fromskew, int32 toskew, + unsigned char* pp, + int h_group, + int v_group ) + +{ + uint32* cp1 = cp+w+toskew; + uint32* cp2 = cp1+w+toskew; + uint32* cp3 = cp2+w+toskew; + int32 incr = 3*w+4*toskew; + int32 Cb, Cr; + int group_size = v_group * h_group + 2; + + (void) y; + fromskew = (fromskew * group_size) / h_group; + + for( yy = 0; yy < h; yy++ ) + { + unsigned char *pp_line; + int y_line_group = yy / v_group; + int y_remainder = yy - y_line_group * v_group; + + pp_line = pp + v_line_group * + + + for( xx = 0; xx < w; xx++ ) + { + Cb = pp + } + } + for (; h >= 4; h -= 4) { + x = w>>2; + do { + Cb = pp[16]; + Cr = pp[17]; + + YCbCrtoRGB(cp [0], pp[ 0]); + YCbCrtoRGB(cp [1], pp[ 1]); + YCbCrtoRGB(cp [2], pp[ 2]); + YCbCrtoRGB(cp [3], pp[ 3]); + YCbCrtoRGB(cp1[0], pp[ 4]); + YCbCrtoRGB(cp1[1], pp[ 5]); + YCbCrtoRGB(cp1[2], pp[ 6]); + YCbCrtoRGB(cp1[3], pp[ 7]); + YCbCrtoRGB(cp2[0], pp[ 8]); + YCbCrtoRGB(cp2[1], pp[ 9]); + YCbCrtoRGB(cp2[2], pp[10]); + YCbCrtoRGB(cp2[3], pp[11]); + YCbCrtoRGB(cp3[0], pp[12]); + YCbCrtoRGB(cp3[1], pp[13]); + YCbCrtoRGB(cp3[2], pp[14]); + YCbCrtoRGB(cp3[3], pp[15]); + + cp += 4, cp1 += 4, cp2 += 4, cp3 += 4; + pp += 18; + } while (--x); + cp += incr, cp1 += incr, cp2 += incr, cp3 += incr; + pp += fromskew; + } +} +#endif + +/* + * 8-bit packed YCbCr samples w/ 4,4 subsampling => RGB + */ +DECLAREContigPutFunc(putcontig8bitYCbCr44tile) +{ + uint32* cp1 = cp+w+toskew; + uint32* cp2 = cp1+w+toskew; + uint32* cp3 = cp2+w+toskew; + int32 incr = 3*w+4*toskew; + + (void) y; + /* adjust fromskew */ + fromskew = (fromskew * 18) / 4; + if ((h & 3) == 0 && (w & 3) == 0) { + for (; h >= 4; h -= 4) { + x = w>>2; + do { + int32 Cb = pp[16]; + int32 Cr = pp[17]; + + YCbCrtoRGB(cp [0], pp[ 0]); + YCbCrtoRGB(cp [1], pp[ 1]); + YCbCrtoRGB(cp [2], pp[ 2]); + YCbCrtoRGB(cp [3], pp[ 3]); + YCbCrtoRGB(cp1[0], pp[ 4]); + YCbCrtoRGB(cp1[1], pp[ 5]); + YCbCrtoRGB(cp1[2], pp[ 6]); + YCbCrtoRGB(cp1[3], pp[ 7]); + YCbCrtoRGB(cp2[0], pp[ 8]); + YCbCrtoRGB(cp2[1], pp[ 9]); + YCbCrtoRGB(cp2[2], pp[10]); + YCbCrtoRGB(cp2[3], pp[11]); + YCbCrtoRGB(cp3[0], pp[12]); + YCbCrtoRGB(cp3[1], pp[13]); + YCbCrtoRGB(cp3[2], pp[14]); + YCbCrtoRGB(cp3[3], pp[15]); + + cp += 4, cp1 += 4, cp2 += 4, cp3 += 4; + pp += 18; + } while (--x); + cp += incr, cp1 += incr, cp2 += incr, cp3 += incr; + pp += fromskew; + } + } else { + while (h > 0) { + for (x = w; x > 0;) { + int32 Cb = pp[16]; + int32 Cr = pp[17]; + switch (x) { + default: + switch (h) { + default: YCbCrtoRGB(cp3[3], pp[15]); /* FALLTHROUGH */ + case 3: YCbCrtoRGB(cp2[3], pp[11]); /* FALLTHROUGH */ + case 2: YCbCrtoRGB(cp1[3], pp[ 7]); /* FALLTHROUGH */ + case 1: YCbCrtoRGB(cp [3], pp[ 3]); /* FALLTHROUGH */ + } /* FALLTHROUGH */ + case 3: + switch (h) { + default: YCbCrtoRGB(cp3[2], pp[14]); /* FALLTHROUGH */ + case 3: YCbCrtoRGB(cp2[2], pp[10]); /* FALLTHROUGH */ + case 2: YCbCrtoRGB(cp1[2], pp[ 6]); /* FALLTHROUGH */ + case 1: YCbCrtoRGB(cp [2], pp[ 2]); /* FALLTHROUGH */ + } /* FALLTHROUGH */ + case 2: + switch (h) { + default: YCbCrtoRGB(cp3[1], pp[13]); /* FALLTHROUGH */ + case 3: YCbCrtoRGB(cp2[1], pp[ 9]); /* FALLTHROUGH */ + case 2: YCbCrtoRGB(cp1[1], pp[ 5]); /* FALLTHROUGH */ + case 1: YCbCrtoRGB(cp [1], pp[ 1]); /* FALLTHROUGH */ + } /* FALLTHROUGH */ + case 1: + switch (h) { + default: YCbCrtoRGB(cp3[0], pp[12]); /* FALLTHROUGH */ + case 3: YCbCrtoRGB(cp2[0], pp[ 8]); /* FALLTHROUGH */ + case 2: YCbCrtoRGB(cp1[0], pp[ 4]); /* FALLTHROUGH */ + case 1: YCbCrtoRGB(cp [0], pp[ 0]); /* FALLTHROUGH */ + } /* FALLTHROUGH */ + } + if (x < 4) { + cp += x; cp1 += x; cp2 += x; cp3 += x; + x = 0; + } + else { + cp += 4; cp1 += 4; cp2 += 4; cp3 += 4; + x -= 4; + } + pp += 18; + } + if (h <= 4) + break; + h -= 4; + cp += incr, cp1 += incr, cp2 += incr, cp3 += incr; + pp += fromskew; + } + } +} + +/* + * 8-bit packed YCbCr samples w/ 4,2 subsampling => RGB + */ +DECLAREContigPutFunc(putcontig8bitYCbCr42tile) +{ + uint32* cp1 = cp+w+toskew; + int32 incr = 2*toskew+w; + + (void) y; + fromskew = (fromskew * 10) / 4; + if ((h & 3) == 0 && (w & 1) == 0) { + for (; h >= 2; h -= 2) { + x = w>>2; + do { + int32 Cb = pp[8]; + int32 Cr = pp[9]; + + YCbCrtoRGB(cp [0], pp[0]); + YCbCrtoRGB(cp [1], pp[1]); + YCbCrtoRGB(cp [2], pp[2]); + YCbCrtoRGB(cp [3], pp[3]); + YCbCrtoRGB(cp1[0], pp[4]); + YCbCrtoRGB(cp1[1], pp[5]); + YCbCrtoRGB(cp1[2], pp[6]); + YCbCrtoRGB(cp1[3], pp[7]); + + cp += 4, cp1 += 4; + pp += 10; + } while (--x); + cp += incr, cp1 += incr; + pp += fromskew; + } + } else { + while (h > 0) { + for (x = w; x > 0;) { + int32 Cb = pp[8]; + int32 Cr = pp[9]; + switch (x) { + default: + switch (h) { + default: YCbCrtoRGB(cp1[3], pp[ 7]); /* FALLTHROUGH */ + case 1: YCbCrtoRGB(cp [3], pp[ 3]); /* FALLTHROUGH */ + } /* FALLTHROUGH */ + case 3: + switch (h) { + default: YCbCrtoRGB(cp1[2], pp[ 6]); /* FALLTHROUGH */ + case 1: YCbCrtoRGB(cp [2], pp[ 2]); /* FALLTHROUGH */ + } /* FALLTHROUGH */ + case 2: + switch (h) { + default: YCbCrtoRGB(cp1[1], pp[ 5]); /* FALLTHROUGH */ + case 1: YCbCrtoRGB(cp [1], pp[ 1]); /* FALLTHROUGH */ + } /* FALLTHROUGH */ + case 1: + switch (h) { + default: YCbCrtoRGB(cp1[0], pp[ 4]); /* FALLTHROUGH */ + case 1: YCbCrtoRGB(cp [0], pp[ 0]); /* FALLTHROUGH */ + } /* FALLTHROUGH */ + } + if (x < 4) { + cp += x; cp1 += x; + x = 0; + } + else { + cp += 4; cp1 += 4; + x -= 4; + } + pp += 10; + } + if (h <= 2) + break; + h -= 2; + cp += incr, cp1 += incr; + pp += fromskew; + } + } +} + +/* + * 8-bit packed YCbCr samples w/ 4,1 subsampling => RGB + */ +DECLAREContigPutFunc(putcontig8bitYCbCr41tile) +{ + (void) y; + /* XXX adjust fromskew */ + do { + x = w>>2; + do { + int32 Cb = pp[4]; + int32 Cr = pp[5]; + + YCbCrtoRGB(cp [0], pp[0]); + YCbCrtoRGB(cp [1], pp[1]); + YCbCrtoRGB(cp [2], pp[2]); + YCbCrtoRGB(cp [3], pp[3]); + + cp += 4; + pp += 6; + } while (--x); + + if( (w&3) != 0 ) + { + int32 Cb = pp[4]; + int32 Cr = pp[5]; + + switch( (w&3) ) { + case 3: YCbCrtoRGB(cp [2], pp[2]); + case 2: YCbCrtoRGB(cp [1], pp[1]); + case 1: YCbCrtoRGB(cp [0], pp[0]); + case 0: break; + } + + cp += (w&3); + pp += 6; + } + + cp += toskew; + pp += fromskew; + } while (--h); + +} + +/* + * 8-bit packed YCbCr samples w/ 2,2 subsampling => RGB + */ +DECLAREContigPutFunc(putcontig8bitYCbCr22tile) +{ + uint32* cp2; + int32 incr = 2*toskew+w; + (void) y; + fromskew = (fromskew / 2) * 6; + cp2 = cp+w+toskew; + while (h>=2) { + x = w; + while (x>=2) { + uint32 Cb = pp[4]; + uint32 Cr = pp[5]; + YCbCrtoRGB(cp[0], pp[0]); + YCbCrtoRGB(cp[1], pp[1]); + YCbCrtoRGB(cp2[0], pp[2]); + YCbCrtoRGB(cp2[1], pp[3]); + cp += 2; + cp2 += 2; + pp += 6; + x -= 2; + } + if (x==1) { + uint32 Cb = pp[4]; + uint32 Cr = pp[5]; + YCbCrtoRGB(cp[0], pp[0]); + YCbCrtoRGB(cp2[0], pp[2]); + cp ++ ; + cp2 ++ ; + pp += 6; + } + cp += incr; + cp2 += incr; + pp += fromskew; + h-=2; + } + if (h==1) { + x = w; + while (x>=2) { + uint32 Cb = pp[4]; + uint32 Cr = pp[5]; + YCbCrtoRGB(cp[0], pp[0]); + YCbCrtoRGB(cp[1], pp[1]); + cp += 2; + cp2 += 2; + pp += 6; + x -= 2; + } + if (x==1) { + uint32 Cb = pp[4]; + uint32 Cr = pp[5]; + YCbCrtoRGB(cp[0], pp[0]); + } + } +} + +/* + * 8-bit packed YCbCr samples w/ 2,1 subsampling => RGB + */ +DECLAREContigPutFunc(putcontig8bitYCbCr21tile) +{ + (void) y; + fromskew = (fromskew * 4) / 2; + do { + x = w>>1; + do { + int32 Cb = pp[2]; + int32 Cr = pp[3]; + + YCbCrtoRGB(cp[0], pp[0]); + YCbCrtoRGB(cp[1], pp[1]); + + cp += 2; + pp += 4; + } while (--x); + + if( (w&1) != 0 ) + { + int32 Cb = pp[2]; + int32 Cr = pp[3]; + + YCbCrtoRGB(cp[0], pp[0]); + + cp += 1; + pp += 4; + } + + cp += toskew; + pp += fromskew; + } while (--h); +} + +/* + * 8-bit packed YCbCr samples w/ 1,2 subsampling => RGB + */ +DECLAREContigPutFunc(putcontig8bitYCbCr12tile) +{ + uint32* cp2; + int32 incr = 2*toskew+w; + (void) y; + fromskew = (fromskew / 2) * 4; + cp2 = cp+w+toskew; + while (h>=2) { + x = w; + do { + uint32 Cb = pp[2]; + uint32 Cr = pp[3]; + YCbCrtoRGB(cp[0], pp[0]); + YCbCrtoRGB(cp2[0], pp[1]); + cp ++; + cp2 ++; + pp += 4; + } while (--x); + cp += incr; + cp2 += incr; + pp += fromskew; + h-=2; + } + if (h==1) { + x = w; + do { + uint32 Cb = pp[2]; + uint32 Cr = pp[3]; + YCbCrtoRGB(cp[0], pp[0]); + cp ++; + pp += 4; + } while (--x); + } +} + +/* + * 8-bit packed YCbCr samples w/ no subsampling => RGB + */ +DECLAREContigPutFunc(putcontig8bitYCbCr11tile) +{ + (void) y; + fromskew *= 3; + do { + x = w; /* was x = w>>1; patched 2000/09/25 warmerda@home.com */ + do { + int32 Cb = pp[1]; + int32 Cr = pp[2]; + + YCbCrtoRGB(*cp++, pp[0]); + + pp += 3; + } while (--x); + cp += toskew; + pp += fromskew; + } while (--h); +} + +/* + * 8-bit packed YCbCr samples w/ no subsampling => RGB + */ +DECLARESepPutFunc(putseparate8bitYCbCr11tile) +{ + (void) y; + (void) a; + /* TODO: naming of input vars is still off, change obfuscating declaration inside define, or resolve obfuscation */ + while (h-- > 0) { + x = w; + do { + uint32 dr, dg, db; + TIFFYCbCrtoRGB(img->ycbcr,*r++,*g++,*b++,&dr,&dg,&db); + *cp++ = PACK(dr,dg,db); + } while (--x); + SKEW(r, g, b, fromskew); + cp += toskew; + } +} +#undef YCbCrtoRGB + +static int +initYCbCrConversion(TIFFRGBAImage* img) +{ + static const char module[] = "initYCbCrConversion"; + + float *luma, *refBlackWhite; + + if (img->ycbcr == NULL) { + img->ycbcr = (TIFFYCbCrToRGB*) _TIFFmalloc( + TIFFroundup_32(sizeof (TIFFYCbCrToRGB), sizeof (long)) + + 4*256*sizeof (TIFFRGBValue) + + 2*256*sizeof (int) + + 3*256*sizeof (int32) + ); + if (img->ycbcr == NULL) { + TIFFErrorExt(img->tif->tif_clientdata, module, + "No space for YCbCr->RGB conversion state"); + return (0); + } + } + + TIFFGetFieldDefaulted(img->tif, TIFFTAG_YCBCRCOEFFICIENTS, &luma); + TIFFGetFieldDefaulted(img->tif, TIFFTAG_REFERENCEBLACKWHITE, + &refBlackWhite); + if (TIFFYCbCrToRGBInit(img->ycbcr, luma, refBlackWhite) < 0) + return(0); + return (1); +} + +static tileContigRoutine +initCIELabConversion(TIFFRGBAImage* img) +{ + static const char module[] = "initCIELabConversion"; + + float *whitePoint; + float refWhite[3]; + + if (!img->cielab) { + img->cielab = (TIFFCIELabToRGB *) + _TIFFmalloc(sizeof(TIFFCIELabToRGB)); + if (!img->cielab) { + TIFFErrorExt(img->tif->tif_clientdata, module, + "No space for CIE L*a*b*->RGB conversion state."); + return NULL; + } + } + + TIFFGetFieldDefaulted(img->tif, TIFFTAG_WHITEPOINT, &whitePoint); + refWhite[1] = 100.0F; + refWhite[0] = whitePoint[0] / whitePoint[1] * refWhite[1]; + refWhite[2] = (1.0F - whitePoint[0] - whitePoint[1]) + / whitePoint[1] * refWhite[1]; + if (TIFFCIELabToRGBInit(img->cielab, &display_sRGB, refWhite) < 0) { + TIFFErrorExt(img->tif->tif_clientdata, module, + "Failed to initialize CIE L*a*b*->RGB conversion state."); + _TIFFfree(img->cielab); + return NULL; + } + + return putcontig8bitCIELab; +} + +/* + * Greyscale images with less than 8 bits/sample are handled + * with a table to avoid lots of shifts and masks. The table + * is setup so that put*bwtile (below) can retrieve 8/bitspersample + * pixel values simply by indexing into the table with one + * number. + */ +static int +makebwmap(TIFFRGBAImage* img) +{ + TIFFRGBValue* Map = img->Map; + int bitspersample = img->bitspersample; + int nsamples = 8 / bitspersample; + int i; + uint32* p; + + if( nsamples == 0 ) + nsamples = 1; + + img->BWmap = (uint32**) _TIFFmalloc( + 256*sizeof (uint32 *)+(256*nsamples*sizeof(uint32))); + if (img->BWmap == NULL) { + TIFFErrorExt(img->tif->tif_clientdata, TIFFFileName(img->tif), "No space for B&W mapping table"); + return (0); + } + p = (uint32*)(img->BWmap + 256); + for (i = 0; i < 256; i++) { + TIFFRGBValue c; + img->BWmap[i] = p; + switch (bitspersample) { +#define GREY(x) c = Map[x]; *p++ = PACK(c,c,c); + case 1: + GREY(i>>7); + GREY((i>>6)&1); + GREY((i>>5)&1); + GREY((i>>4)&1); + GREY((i>>3)&1); + GREY((i>>2)&1); + GREY((i>>1)&1); + GREY(i&1); + break; + case 2: + GREY(i>>6); + GREY((i>>4)&3); + GREY((i>>2)&3); + GREY(i&3); + break; + case 4: + GREY(i>>4); + GREY(i&0xf); + break; + case 8: + case 16: + GREY(i); + break; + } +#undef GREY + } + return (1); +} + +/* + * Construct a mapping table to convert from the range + * of the data samples to [0,255] --for display. This + * process also handles inverting B&W images when needed. + */ +static int +setupMap(TIFFRGBAImage* img) +{ + int32 x, range; + + range = (int32)((1L<bitspersample)-1); + + /* treat 16 bit the same as eight bit */ + if( img->bitspersample == 16 ) + range = (int32) 255; + + img->Map = (TIFFRGBValue*) _TIFFmalloc((range+1) * sizeof (TIFFRGBValue)); + if (img->Map == NULL) { + TIFFErrorExt(img->tif->tif_clientdata, TIFFFileName(img->tif), + "No space for photometric conversion table"); + return (0); + } + if (img->photometric == PHOTOMETRIC_MINISWHITE) { + for (x = 0; x <= range; x++) + img->Map[x] = (TIFFRGBValue) (((range - x) * 255) / range); + } else { + for (x = 0; x <= range; x++) + img->Map[x] = (TIFFRGBValue) ((x * 255) / range); + } + if (img->bitspersample <= 16 && + (img->photometric == PHOTOMETRIC_MINISBLACK || + img->photometric == PHOTOMETRIC_MINISWHITE)) { + /* + * Use photometric mapping table to construct + * unpacking tables for samples <= 8 bits. + */ + if (!makebwmap(img)) + return (0); + /* no longer need Map, free it */ + _TIFFfree(img->Map), img->Map = NULL; + } + return (1); +} + +static int +checkcmap(TIFFRGBAImage* img) +{ + uint16* r = img->redcmap; + uint16* g = img->greencmap; + uint16* b = img->bluecmap; + long n = 1L<bitspersample; + + while (n-- > 0) + if (*r++ >= 256 || *g++ >= 256 || *b++ >= 256) + return (16); + return (8); +} + +static void +cvtcmap(TIFFRGBAImage* img) +{ + uint16* r = img->redcmap; + uint16* g = img->greencmap; + uint16* b = img->bluecmap; + long i; + + for (i = (1L<bitspersample)-1; i >= 0; i--) { +#define CVT(x) ((uint16)((x)>>8)) + r[i] = CVT(r[i]); + g[i] = CVT(g[i]); + b[i] = CVT(b[i]); +#undef CVT + } +} + +/* + * Palette images with <= 8 bits/sample are handled + * with a table to avoid lots of shifts and masks. The table + * is setup so that put*cmaptile (below) can retrieve 8/bitspersample + * pixel values simply by indexing into the table with one + * number. + */ +static int +makecmap(TIFFRGBAImage* img) +{ + int bitspersample = img->bitspersample; + int nsamples = 8 / bitspersample; + uint16* r = img->redcmap; + uint16* g = img->greencmap; + uint16* b = img->bluecmap; + uint32 *p; + int i; + + img->PALmap = (uint32**) _TIFFmalloc( + 256*sizeof (uint32 *)+(256*nsamples*sizeof(uint32))); + if (img->PALmap == NULL) { + TIFFErrorExt(img->tif->tif_clientdata, TIFFFileName(img->tif), "No space for Palette mapping table"); + return (0); + } + p = (uint32*)(img->PALmap + 256); + for (i = 0; i < 256; i++) { + TIFFRGBValue c; + img->PALmap[i] = p; +#define CMAP(x) c = (TIFFRGBValue) x; *p++ = PACK(r[c]&0xff, g[c]&0xff, b[c]&0xff); + switch (bitspersample) { + case 1: + CMAP(i>>7); + CMAP((i>>6)&1); + CMAP((i>>5)&1); + CMAP((i>>4)&1); + CMAP((i>>3)&1); + CMAP((i>>2)&1); + CMAP((i>>1)&1); + CMAP(i&1); + break; + case 2: + CMAP(i>>6); + CMAP((i>>4)&3); + CMAP((i>>2)&3); + CMAP(i&3); + break; + case 4: + CMAP(i>>4); + CMAP(i&0xf); + break; + case 8: + CMAP(i); + break; + } +#undef CMAP + } + return (1); +} + +/* + * Construct any mapping table used + * by the associated put routine. + */ +static int +buildMap(TIFFRGBAImage* img) +{ + switch (img->photometric) { + case PHOTOMETRIC_RGB: + case PHOTOMETRIC_YCBCR: + case PHOTOMETRIC_SEPARATED: + if (img->bitspersample == 8) + break; + /* fall thru... */ + case PHOTOMETRIC_MINISBLACK: + case PHOTOMETRIC_MINISWHITE: + if (!setupMap(img)) + return (0); + break; + case PHOTOMETRIC_PALETTE: + /* + * Convert 16-bit colormap to 8-bit (unless it looks + * like an old-style 8-bit colormap). + */ + if (checkcmap(img) == 16) + cvtcmap(img); + else + TIFFWarningExt(img->tif->tif_clientdata, TIFFFileName(img->tif), "Assuming 8-bit colormap"); + /* + * Use mapping table and colormap to construct + * unpacking tables for samples < 8 bits. + */ + if (img->bitspersample <= 8 && !makecmap(img)) + return (0); + break; + } + return (1); +} + +/* + * Select the appropriate conversion routine for packed data. + */ +static int +PickContigCase(TIFFRGBAImage* img) +{ + img->get = TIFFIsTiled(img->tif) ? gtTileContig : gtStripContig; + img->put.contig = NULL; + switch (img->photometric) { + case PHOTOMETRIC_RGB: + switch (img->bitspersample) { + case 8: + if (img->alpha == EXTRASAMPLE_ASSOCALPHA) + img->put.contig = putRGBAAcontig8bittile; + else if (img->alpha == EXTRASAMPLE_UNASSALPHA) + { + if (BuildMapUaToAa(img)) + img->put.contig = putRGBUAcontig8bittile; + } + else + img->put.contig = putRGBcontig8bittile; + break; + case 16: + if (img->alpha == EXTRASAMPLE_ASSOCALPHA) + { + if (BuildMapBitdepth16To8(img)) + img->put.contig = putRGBAAcontig16bittile; + } + else if (img->alpha == EXTRASAMPLE_UNASSALPHA) + { + if (BuildMapBitdepth16To8(img) && + BuildMapUaToAa(img)) + img->put.contig = putRGBUAcontig16bittile; + } + else + { + if (BuildMapBitdepth16To8(img)) + img->put.contig = putRGBcontig16bittile; + } + break; + } + break; + case PHOTOMETRIC_SEPARATED: + if (buildMap(img)) { + if (img->bitspersample == 8) { + if (!img->Map) + img->put.contig = putRGBcontig8bitCMYKtile; + else + img->put.contig = putRGBcontig8bitCMYKMaptile; + } + } + break; + case PHOTOMETRIC_PALETTE: + if (buildMap(img)) { + switch (img->bitspersample) { + case 8: + img->put.contig = put8bitcmaptile; + break; + case 4: + img->put.contig = put4bitcmaptile; + break; + case 2: + img->put.contig = put2bitcmaptile; + break; + case 1: + img->put.contig = put1bitcmaptile; + break; + } + } + break; + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + if (buildMap(img)) { + switch (img->bitspersample) { + case 16: + img->put.contig = put16bitbwtile; + break; + case 8: + if (img->alpha && img->samplesperpixel == 2) + img->put.contig = putagreytile; + else + img->put.contig = putgreytile; + break; + case 4: + img->put.contig = put4bitbwtile; + break; + case 2: + img->put.contig = put2bitbwtile; + break; + case 1: + img->put.contig = put1bitbwtile; + break; + } + } + break; + case PHOTOMETRIC_YCBCR: + if ((img->bitspersample==8) && (img->samplesperpixel==3)) + { + if (initYCbCrConversion(img)!=0) + { + /* + * The 6.0 spec says that subsampling must be + * one of 1, 2, or 4, and that vertical subsampling + * must always be <= horizontal subsampling; so + * there are only a few possibilities and we just + * enumerate the cases. + * Joris: added support for the [1,2] case, nonetheless, to accomodate + * some OJPEG files + */ + uint16 SubsamplingHor; + uint16 SubsamplingVer; + TIFFGetFieldDefaulted(img->tif, TIFFTAG_YCBCRSUBSAMPLING, &SubsamplingHor, &SubsamplingVer); + switch ((SubsamplingHor<<4)|SubsamplingVer) { + case 0x44: + img->put.contig = putcontig8bitYCbCr44tile; + break; + case 0x42: + img->put.contig = putcontig8bitYCbCr42tile; + break; + case 0x41: + img->put.contig = putcontig8bitYCbCr41tile; + break; + case 0x22: + img->put.contig = putcontig8bitYCbCr22tile; + break; + case 0x21: + img->put.contig = putcontig8bitYCbCr21tile; + break; + case 0x12: + img->put.contig = putcontig8bitYCbCr12tile; + break; + case 0x11: + img->put.contig = putcontig8bitYCbCr11tile; + break; + } + } + } + break; + case PHOTOMETRIC_CIELAB: + if (buildMap(img)) { + if (img->bitspersample == 8) + img->put.contig = initCIELabConversion(img); + break; + } + } + return ((img->get!=NULL) && (img->put.contig!=NULL)); +} + +/* + * Select the appropriate conversion routine for unpacked data. + * + * NB: we assume that unpacked single channel data is directed + * to the "packed routines. + */ +static int +PickSeparateCase(TIFFRGBAImage* img) +{ + img->get = TIFFIsTiled(img->tif) ? gtTileSeparate : gtStripSeparate; + img->put.separate = NULL; + switch (img->photometric) { + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + /* greyscale images processed pretty much as RGB by gtTileSeparate */ + case PHOTOMETRIC_RGB: + switch (img->bitspersample) { + case 8: + if (img->alpha == EXTRASAMPLE_ASSOCALPHA) + img->put.separate = putRGBAAseparate8bittile; + else if (img->alpha == EXTRASAMPLE_UNASSALPHA) + { + if (BuildMapUaToAa(img)) + img->put.separate = putRGBUAseparate8bittile; + } + else + img->put.separate = putRGBseparate8bittile; + break; + case 16: + if (img->alpha == EXTRASAMPLE_ASSOCALPHA) + { + if (BuildMapBitdepth16To8(img)) + img->put.separate = putRGBAAseparate16bittile; + } + else if (img->alpha == EXTRASAMPLE_UNASSALPHA) + { + if (BuildMapBitdepth16To8(img) && + BuildMapUaToAa(img)) + img->put.separate = putRGBUAseparate16bittile; + } + else + { + if (BuildMapBitdepth16To8(img)) + img->put.separate = putRGBseparate16bittile; + } + break; + } + break; + case PHOTOMETRIC_SEPARATED: + if (img->bitspersample == 8 && img->samplesperpixel == 4) + { + img->alpha = 1; // Not alpha, but seems like the only way to get 4th band + img->put.separate = putCMYKseparate8bittile; + } + break; + case PHOTOMETRIC_YCBCR: + if ((img->bitspersample==8) && (img->samplesperpixel==3)) + { + if (initYCbCrConversion(img)!=0) + { + uint16 hs, vs; + TIFFGetFieldDefaulted(img->tif, TIFFTAG_YCBCRSUBSAMPLING, &hs, &vs); + switch ((hs<<4)|vs) { + case 0x11: + img->put.separate = putseparate8bitYCbCr11tile; + break; + /* TODO: add other cases here */ + } + } + } + break; + } + return ((img->get!=NULL) && (img->put.separate!=NULL)); +} + +static int +BuildMapUaToAa(TIFFRGBAImage* img) +{ + static const char module[]="BuildMapUaToAa"; + uint8* m; + uint16 na,nv; + assert(img->UaToAa==NULL); + img->UaToAa=_TIFFmalloc(65536); + if (img->UaToAa==NULL) + { + TIFFErrorExt(img->tif->tif_clientdata,module,"Out of memory"); + return(0); + } + m=img->UaToAa; + for (na=0; na<256; na++) + { + for (nv=0; nv<256; nv++) + *m++=(nv*na+127)/255; + } + return(1); +} + +static int +BuildMapBitdepth16To8(TIFFRGBAImage* img) +{ + static const char module[]="BuildMapBitdepth16To8"; + uint8* m; + uint32 n; + assert(img->Bitdepth16To8==NULL); + img->Bitdepth16To8=_TIFFmalloc(65536); + if (img->Bitdepth16To8==NULL) + { + TIFFErrorExt(img->tif->tif_clientdata,module,"Out of memory"); + return(0); + } + m=img->Bitdepth16To8; + for (n=0; n<65536; n++) + *m++=(n+128)/257; + return(1); +} + + +/* + * Read a whole strip off data from the file, and convert to RGBA form. + * If this is the last strip, then it will only contain the portion of + * the strip that is actually within the image space. The result is + * organized in bottom to top form. + */ + + +int +TIFFReadRGBAStrip(TIFF* tif, uint32 row, uint32 * raster ) + +{ + char emsg[1024] = ""; + TIFFRGBAImage img; + int ok; + uint32 rowsperstrip, rows_to_read; + + if( TIFFIsTiled( tif ) ) + { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), + "Can't use TIFFReadRGBAStrip() with tiled file."); + return (0); + } + + TIFFGetFieldDefaulted(tif, TIFFTAG_ROWSPERSTRIP, &rowsperstrip); + if( (row % rowsperstrip) != 0 ) + { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), + "Row passed to TIFFReadRGBAStrip() must be first in a strip."); + return (0); + } + + if (TIFFRGBAImageOK(tif, emsg) && TIFFRGBAImageBegin(&img, tif, 0, emsg)) { + + img.row_offset = row; + img.col_offset = 0; + + if( row + rowsperstrip > img.height ) + rows_to_read = img.height - row; + else + rows_to_read = rowsperstrip; + + ok = TIFFRGBAImageGet(&img, raster, img.width, rows_to_read ); + + TIFFRGBAImageEnd(&img); + } else { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "%s", emsg); + ok = 0; + } + + return (ok); +} + +/* + * Read a whole tile off data from the file, and convert to RGBA form. + * The returned RGBA data is organized from bottom to top of tile, + * and may include zeroed areas if the tile extends off the image. + */ + +int +TIFFReadRGBATile(TIFF* tif, uint32 col, uint32 row, uint32 * raster) + +{ + char emsg[1024] = ""; + TIFFRGBAImage img; + int ok; + uint32 tile_xsize, tile_ysize; + uint32 read_xsize, read_ysize; + uint32 i_row; + + /* + * Verify that our request is legal - on a tile file, and on a + * tile boundary. + */ + + if( !TIFFIsTiled( tif ) ) + { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), + "Can't use TIFFReadRGBATile() with stripped file."); + return (0); + } + + TIFFGetFieldDefaulted(tif, TIFFTAG_TILEWIDTH, &tile_xsize); + TIFFGetFieldDefaulted(tif, TIFFTAG_TILELENGTH, &tile_ysize); + if( (col % tile_xsize) != 0 || (row % tile_ysize) != 0 ) + { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), + "Row/col passed to TIFFReadRGBATile() must be top" + "left corner of a tile."); + return (0); + } + + /* + * Setup the RGBA reader. + */ + + if (!TIFFRGBAImageOK(tif, emsg) + || !TIFFRGBAImageBegin(&img, tif, 0, emsg)) { + TIFFErrorExt(tif->tif_clientdata, TIFFFileName(tif), "%s", emsg); + return( 0 ); + } + + /* + * The TIFFRGBAImageGet() function doesn't allow us to get off the + * edge of the image, even to fill an otherwise valid tile. So we + * figure out how much we can read, and fix up the tile buffer to + * a full tile configuration afterwards. + */ + + if( row + tile_ysize > img.height ) + read_ysize = img.height - row; + else + read_ysize = tile_ysize; + + if( col + tile_xsize > img.width ) + read_xsize = img.width - col; + else + read_xsize = tile_xsize; + + /* + * Read the chunk of imagery. + */ + + img.row_offset = row; + img.col_offset = col; + + ok = TIFFRGBAImageGet(&img, raster, read_xsize, read_ysize ); + + TIFFRGBAImageEnd(&img); + + /* + * If our read was incomplete we will need to fix up the tile by + * shifting the data around as if a full tile of data is being returned. + * + * This is all the more complicated because the image is organized in + * bottom to top format. + */ + + if( read_xsize == tile_xsize && read_ysize == tile_ysize ) + return( ok ); + + for( i_row = 0; i_row < read_ysize; i_row++ ) { + memmove( raster + (tile_ysize - i_row - 1) * tile_xsize, + raster + (read_ysize - i_row - 1) * read_xsize, + read_xsize * sizeof(uint32) ); + _TIFFmemset( raster + (tile_ysize - i_row - 1) * tile_xsize+read_xsize, + 0, sizeof(uint32) * (tile_xsize - read_xsize) ); + } + + for( i_row = read_ysize; i_row < tile_ysize; i_row++ ) { + _TIFFmemset( raster + (tile_ysize - i_row - 1) * tile_xsize, + 0, sizeof(uint32) * tile_xsize ); + } + + return (ok); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_jbig.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_jbig.c new file mode 100644 index 000000000..37878f6e7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_jbig.c @@ -0,0 +1,213 @@ +/* $Id: tif_jbig.c,v 1.15 2010-03-10 18:56:48 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * JBIG Compression Algorithm Support. + * Contributed by Lee Howard + * + */ + +#include "tiffiop.h" + +#ifdef JBIG_SUPPORT +#include "jbig.h" + +static int JBIGSetupDecode(TIFF* tif) +{ + if (TIFFNumberOfStrips(tif) != 1) + { + TIFFErrorExt(tif->tif_clientdata, "JBIG", "Multistrip images not supported in decoder"); + return 0; + } + + return 1; +} + +static int JBIGDecode(TIFF* tif, uint8* buffer, tmsize_t size, uint16 s) +{ + struct jbg_dec_state decoder; + int decodeStatus = 0; + unsigned char* pImage = NULL; + (void) size, (void) s; + + if (isFillOrder(tif, tif->tif_dir.td_fillorder)) + { + TIFFReverseBits(tif->tif_rawdata, tif->tif_rawdatasize); + } + + jbg_dec_init(&decoder); + +#if defined(HAVE_JBG_NEWLEN) + jbg_newlen(tif->tif_rawdata, (size_t)tif->tif_rawdatasize); + /* + * I do not check the return status of jbg_newlen because even if this + * function fails it does not necessarily mean that decoding the image + * will fail. It is generally only needed for received fax images + * that do not contain the actual length of the image in the BIE + * header. I do not log when an error occurs because that will cause + * problems when converting JBIG encoded TIFF's to + * PostScript. As long as the actual image length is contained in the + * BIE header jbg_dec_in should succeed. + */ +#endif /* HAVE_JBG_NEWLEN */ + + decodeStatus = jbg_dec_in(&decoder, (unsigned char*)tif->tif_rawdata, + (size_t)tif->tif_rawdatasize, NULL); + if (JBG_EOK != decodeStatus) + { + /* + * XXX: JBG_EN constant was defined in pre-2.0 releases of the + * JBIG-KIT. Since the 2.0 the error reporting functions were + * changed. We will handle both cases here. + */ + TIFFErrorExt(tif->tif_clientdata, + "JBIG", "Error (%d) decoding: %s", + decodeStatus, +#if defined(JBG_EN) + jbg_strerror(decodeStatus, JBG_EN) +#else + jbg_strerror(decodeStatus) +#endif + ); + return 0; + } + + pImage = jbg_dec_getimage(&decoder, 0); + _TIFFmemcpy(buffer, pImage, jbg_dec_getsize(&decoder)); + jbg_dec_free(&decoder); + return 1; +} + +static int JBIGSetupEncode(TIFF* tif) +{ + if (TIFFNumberOfStrips(tif) != 1) + { + TIFFErrorExt(tif->tif_clientdata, "JBIG", "Multistrip images not supported in encoder"); + return 0; + } + + return 1; +} + +static int JBIGCopyEncodedData(TIFF* tif, unsigned char* pp, size_t cc, uint16 s) +{ + (void) s; + while (cc > 0) + { + tmsize_t n = (tmsize_t)cc; + + if (tif->tif_rawcc + n > tif->tif_rawdatasize) + { + n = tif->tif_rawdatasize - tif->tif_rawcc; + } + + assert(n > 0); + _TIFFmemcpy(tif->tif_rawcp, pp, n); + tif->tif_rawcp += n; + tif->tif_rawcc += n; + pp += n; + cc -= (size_t)n; + if (tif->tif_rawcc >= tif->tif_rawdatasize && + !TIFFFlushData1(tif)) + { + return (-1); + } + } + + return (1); +} + +static void JBIGOutputBie(unsigned char* buffer, size_t len, void* userData) +{ + TIFF* tif = (TIFF*)userData; + + if (isFillOrder(tif, tif->tif_dir.td_fillorder)) + { + TIFFReverseBits(buffer, (tmsize_t)len); + } + + JBIGCopyEncodedData(tif, buffer, len, 0); +} + +static int JBIGEncode(TIFF* tif, uint8* buffer, tmsize_t size, uint16 s) +{ + TIFFDirectory* dir = &tif->tif_dir; + struct jbg_enc_state encoder; + + (void) size, (void) s; + + jbg_enc_init(&encoder, + dir->td_imagewidth, + dir->td_imagelength, + 1, + &buffer, + JBIGOutputBie, + tif); + /* + * jbg_enc_out does the "real" encoding. As data is encoded, + * JBIGOutputBie is called, which writes the data to the directory. + */ + jbg_enc_out(&encoder); + jbg_enc_free(&encoder); + + return 1; +} + +int TIFFInitJBIG(TIFF* tif, int scheme) +{ + assert(scheme == COMPRESSION_JBIG); + + /* + * These flags are set so the JBIG Codec can control when to reverse + * bits and when not to and to allow the jbig decoder and bit reverser + * to write to memory when necessary. + */ + tif->tif_flags |= TIFF_NOBITREV; + tif->tif_flags &= ~TIFF_MAPPED; + + /* Setup the function pointers for encode, decode, and cleanup. */ + tif->tif_setupdecode = JBIGSetupDecode; + tif->tif_decodestrip = JBIGDecode; + + tif->tif_setupencode = JBIGSetupEncode; + tif->tif_encodestrip = JBIGEncode; + + return 1; +} + +#endif /* JBIG_SUPPORT */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_jpeg.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_jpeg.c new file mode 100644 index 000000000..b61b91b0d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_jpeg.c @@ -0,0 +1,2304 @@ +/* $Id: tif_jpeg.c,v 1.111 2012-07-06 18:48:04 bfriesen Exp $ */ + +/* + * Copyright (c) 1994-1997 Sam Leffler + * Copyright (c) 1994-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#define WIN32_LEAN_AND_MEAN +#define VC_EXTRALEAN + +#include "tiffiop.h" +#ifdef JPEG_SUPPORT + +/* + * TIFF Library + * + * JPEG Compression support per TIFF Technical Note #2 + * (*not* per the original TIFF 6.0 spec). + * + * This file is simply an interface to the libjpeg library written by + * the Independent JPEG Group. You need release 5 or later of the IJG + * code, which you can find on the Internet at ftp.uu.net:/graphics/jpeg/. + * + * Contributed by Tom Lane . + */ +#include + +int TIFFFillStrip(TIFF* tif, uint32 strip); +int TIFFFillTile(TIFF* tif, uint32 tile); +int TIFFReInitJPEG_12( TIFF *tif, int scheme, int is_encode ); + +/* We undefine FAR to avoid conflict with JPEG definition */ + +#ifdef FAR +#undef FAR +#endif + +/* + Libjpeg's jmorecfg.h defines INT16 and INT32, but only if XMD_H is + not defined. Unfortunately, the MinGW and Borland compilers include + a typedef for INT32, which causes a conflict. MSVC does not include + a conficting typedef given the headers which are included. +*/ +#if defined(__BORLANDC__) || defined(__MINGW32__) +# define XMD_H 1 +#endif + +/* + The windows RPCNDR.H file defines boolean, but defines it with the + unsigned char size. You should compile JPEG library using appropriate + definitions in jconfig.h header, but many users compile library in wrong + way. That causes errors of the following type: + + "JPEGLib: JPEG parameter struct mismatch: library thinks size is 432, + caller expects 464" + + For such users we wil fix the problem here. See install.doc file from + the JPEG library distribution for details. +*/ + +/* Define "boolean" as unsigned char, not int, per Windows custom. */ +#if defined(__WIN32__) && !defined(__MINGW32__) +# ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ + typedef unsigned char boolean; +# endif +# define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +#endif + +#include "jpeglib.h" +#include "jerror.h" + +/* + * Do we want to do special processing suitable for when JSAMPLE is a + * 16bit value? + */ + +#if defined(JPEG_LIB_MK1) +# define JPEG_LIB_MK1_OR_12BIT 1 +#elif BITS_IN_JSAMPLE == 12 +# define JPEG_LIB_MK1_OR_12BIT 1 +#endif + +/* + * We are using width_in_blocks which is supposed to be private to + * libjpeg. Unfortunately, the libjpeg delivered with Cygwin has + * renamed this member to width_in_data_units. Since the header has + * also renamed a define, use that unique define name in order to + * detect the problem header and adjust to suit. + */ +#if defined(D_MAX_DATA_UNITS_IN_MCU) +#define width_in_blocks width_in_data_units +#endif + +/* + * On some machines it may be worthwhile to use _setjmp or sigsetjmp + * in place of plain setjmp. These macros will make it easier. + */ +#define SETJMP(jbuf) setjmp(jbuf) +#define LONGJMP(jbuf,code) longjmp(jbuf,code) +#define JMP_BUF jmp_buf + +typedef struct jpeg_destination_mgr jpeg_destination_mgr; +typedef struct jpeg_source_mgr jpeg_source_mgr; +typedef struct jpeg_error_mgr jpeg_error_mgr; + +/* + * State block for each open TIFF file using + * libjpeg to do JPEG compression/decompression. + * + * libjpeg's visible state is either a jpeg_compress_struct + * or jpeg_decompress_struct depending on which way we + * are going. comm can be used to refer to the fields + * which are common to both. + * + * NB: cinfo is required to be the first member of JPEGState, + * so we can safely cast JPEGState* -> jpeg_xxx_struct* + * and vice versa! + */ +typedef struct { + union { + struct jpeg_compress_struct c; + struct jpeg_decompress_struct d; + struct jpeg_common_struct comm; + } cinfo; /* NB: must be first */ + int cinfo_initialized; + + jpeg_error_mgr err; /* libjpeg error manager */ + JMP_BUF exit_jmpbuf; /* for catching libjpeg failures */ + /* + * The following two members could be a union, but + * they're small enough that it's not worth the effort. + */ + jpeg_destination_mgr dest; /* data dest for compression */ + jpeg_source_mgr src; /* data source for decompression */ + /* private state */ + TIFF* tif; /* back link needed by some code */ + uint16 photometric; /* copy of PhotometricInterpretation */ + uint16 h_sampling; /* luminance sampling factors */ + uint16 v_sampling; + tmsize_t bytesperline; /* decompressed bytes per scanline */ + /* pointers to intermediate buffers when processing downsampled data */ + JSAMPARRAY ds_buffer[MAX_COMPONENTS]; + int scancount; /* number of "scanlines" accumulated */ + int samplesperclump; + + TIFFVGetMethod vgetparent; /* super-class method */ + TIFFVSetMethod vsetparent; /* super-class method */ + TIFFPrintMethod printdir; /* super-class method */ + TIFFStripMethod defsparent; /* super-class method */ + TIFFTileMethod deftparent; /* super-class method */ + /* pseudo-tag fields */ + void* jpegtables; /* JPEGTables tag value, or NULL */ + uint32 jpegtables_length; /* number of bytes in same */ + int jpegquality; /* Compression quality level */ + int jpegcolormode; /* Auto RGB<=>YCbCr convert? */ + int jpegtablesmode; /* What to put in JPEGTables */ + + int ycbcrsampling_fetched; +} JPEGState; + +#define JState(tif) ((JPEGState*)(tif)->tif_data) + +static int JPEGDecode(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s); +static int JPEGDecodeRaw(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s); +static int JPEGEncode(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s); +static int JPEGEncodeRaw(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s); +static int JPEGInitializeLibJPEG(TIFF * tif, int decode ); +static int DecodeRowError(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s); + +#define FIELD_JPEGTABLES (FIELD_CODEC+0) + +static const TIFFField jpegFields[] = { + { TIFFTAG_JPEGTABLES, -3, -3, TIFF_UNDEFINED, 0, TIFF_SETGET_C32_UINT8, TIFF_SETGET_C32_UINT8, FIELD_JPEGTABLES, FALSE, TRUE, "JPEGTables", NULL }, + { TIFFTAG_JPEGQUALITY, 0, 0, TIFF_ANY, 0, TIFF_SETGET_INT, TIFF_SETGET_UNDEFINED, FIELD_PSEUDO, TRUE, FALSE, "", NULL }, + { TIFFTAG_JPEGCOLORMODE, 0, 0, TIFF_ANY, 0, TIFF_SETGET_INT, TIFF_SETGET_UNDEFINED, FIELD_PSEUDO, FALSE, FALSE, "", NULL }, + { TIFFTAG_JPEGTABLESMODE, 0, 0, TIFF_ANY, 0, TIFF_SETGET_INT, TIFF_SETGET_UNDEFINED, FIELD_PSEUDO, FALSE, FALSE, "", NULL } +}; + +/* + * libjpeg interface layer. + * + * We use setjmp/longjmp to return control to libtiff + * when a fatal error is encountered within the JPEG + * library. We also direct libjpeg error and warning + * messages through the appropriate libtiff handlers. + */ + +/* + * Error handling routines (these replace corresponding + * IJG routines from jerror.c). These are used for both + * compression and decompression. + */ +static void +TIFFjpeg_error_exit(j_common_ptr cinfo) +{ + JPEGState *sp = (JPEGState *) cinfo; /* NB: cinfo assumed first */ + char buffer[JMSG_LENGTH_MAX]; + + (*cinfo->err->format_message) (cinfo, buffer); + TIFFErrorExt(sp->tif->tif_clientdata, "JPEGLib", "%s", buffer); /* display the error message */ + jpeg_abort(cinfo); /* clean up libjpeg state */ + LONGJMP(sp->exit_jmpbuf, 1); /* return to libtiff caller */ +} + +/* + * This routine is invoked only for warning messages, + * since error_exit does its own thing and trace_level + * is never set > 0. + */ +static void +TIFFjpeg_output_message(j_common_ptr cinfo) +{ + char buffer[JMSG_LENGTH_MAX]; + + (*cinfo->err->format_message) (cinfo, buffer); + TIFFWarningExt(((JPEGState *) cinfo)->tif->tif_clientdata, "JPEGLib", "%s", buffer); +} + +/* + * Interface routines. This layer of routines exists + * primarily to limit side-effects from using setjmp. + * Also, normal/error returns are converted into return + * values per libtiff practice. + */ +#define CALLJPEG(sp, fail, op) (SETJMP((sp)->exit_jmpbuf) ? (fail) : (op)) +#define CALLVJPEG(sp, op) CALLJPEG(sp, 0, ((op),1)) + +static int +TIFFjpeg_create_compress(JPEGState* sp) +{ + /* initialize JPEG error handling */ + sp->cinfo.c.err = jpeg_std_error(&sp->err); + sp->err.error_exit = TIFFjpeg_error_exit; + sp->err.output_message = TIFFjpeg_output_message; + + return CALLVJPEG(sp, jpeg_create_compress(&sp->cinfo.c)); +} + +static int +TIFFjpeg_create_decompress(JPEGState* sp) +{ + /* initialize JPEG error handling */ + sp->cinfo.d.err = jpeg_std_error(&sp->err); + sp->err.error_exit = TIFFjpeg_error_exit; + sp->err.output_message = TIFFjpeg_output_message; + + return CALLVJPEG(sp, jpeg_create_decompress(&sp->cinfo.d)); +} + +static int +TIFFjpeg_set_defaults(JPEGState* sp) +{ + return CALLVJPEG(sp, jpeg_set_defaults(&sp->cinfo.c)); +} + +static int +TIFFjpeg_set_colorspace(JPEGState* sp, J_COLOR_SPACE colorspace) +{ + return CALLVJPEG(sp, jpeg_set_colorspace(&sp->cinfo.c, colorspace)); +} + +static int +TIFFjpeg_set_quality(JPEGState* sp, int quality, boolean force_baseline) +{ + return CALLVJPEG(sp, + jpeg_set_quality(&sp->cinfo.c, quality, force_baseline)); +} + +static int +TIFFjpeg_suppress_tables(JPEGState* sp, boolean suppress) +{ + return CALLVJPEG(sp, jpeg_suppress_tables(&sp->cinfo.c, suppress)); +} + +static int +TIFFjpeg_start_compress(JPEGState* sp, boolean write_all_tables) +{ + return CALLVJPEG(sp, + jpeg_start_compress(&sp->cinfo.c, write_all_tables)); +} + +static int +TIFFjpeg_write_scanlines(JPEGState* sp, JSAMPARRAY scanlines, int num_lines) +{ + return CALLJPEG(sp, -1, (int) jpeg_write_scanlines(&sp->cinfo.c, + scanlines, (JDIMENSION) num_lines)); +} + +static int +TIFFjpeg_write_raw_data(JPEGState* sp, JSAMPIMAGE data, int num_lines) +{ + return CALLJPEG(sp, -1, (int) jpeg_write_raw_data(&sp->cinfo.c, + data, (JDIMENSION) num_lines)); +} + +static int +TIFFjpeg_finish_compress(JPEGState* sp) +{ + return CALLVJPEG(sp, jpeg_finish_compress(&sp->cinfo.c)); +} + +static int +TIFFjpeg_write_tables(JPEGState* sp) +{ + return CALLVJPEG(sp, jpeg_write_tables(&sp->cinfo.c)); +} + +static int +TIFFjpeg_read_header(JPEGState* sp, boolean require_image) +{ + return CALLJPEG(sp, -1, jpeg_read_header(&sp->cinfo.d, require_image)); +} + +static int +TIFFjpeg_start_decompress(JPEGState* sp) +{ + return CALLVJPEG(sp, jpeg_start_decompress(&sp->cinfo.d)); +} + +static int +TIFFjpeg_read_scanlines(JPEGState* sp, JSAMPARRAY scanlines, int max_lines) +{ + return CALLJPEG(sp, -1, (int) jpeg_read_scanlines(&sp->cinfo.d, + scanlines, (JDIMENSION) max_lines)); +} + +static int +TIFFjpeg_read_raw_data(JPEGState* sp, JSAMPIMAGE data, int max_lines) +{ + return CALLJPEG(sp, -1, (int) jpeg_read_raw_data(&sp->cinfo.d, + data, (JDIMENSION) max_lines)); +} + +static int +TIFFjpeg_finish_decompress(JPEGState* sp) +{ + return CALLJPEG(sp, -1, (int) jpeg_finish_decompress(&sp->cinfo.d)); +} + +static int +TIFFjpeg_abort(JPEGState* sp) +{ + return CALLVJPEG(sp, jpeg_abort(&sp->cinfo.comm)); +} + +static int +TIFFjpeg_destroy(JPEGState* sp) +{ + return CALLVJPEG(sp, jpeg_destroy(&sp->cinfo.comm)); +} + +static JSAMPARRAY +TIFFjpeg_alloc_sarray(JPEGState* sp, int pool_id, + JDIMENSION samplesperrow, JDIMENSION numrows) +{ + return CALLJPEG(sp, (JSAMPARRAY) NULL, + (*sp->cinfo.comm.mem->alloc_sarray) + (&sp->cinfo.comm, pool_id, samplesperrow, numrows)); +} + +/* + * JPEG library destination data manager. + * These routines direct compressed data from libjpeg into the + * libtiff output buffer. + */ + +static void +std_init_destination(j_compress_ptr cinfo) +{ + JPEGState* sp = (JPEGState*) cinfo; + TIFF* tif = sp->tif; + + sp->dest.next_output_byte = (JOCTET*) tif->tif_rawdata; + sp->dest.free_in_buffer = (size_t) tif->tif_rawdatasize; +} + +static boolean +std_empty_output_buffer(j_compress_ptr cinfo) +{ + JPEGState* sp = (JPEGState*) cinfo; + TIFF* tif = sp->tif; + + /* the entire buffer has been filled */ + tif->tif_rawcc = tif->tif_rawdatasize; + +#ifdef IPPJ_HUFF + /* + * The Intel IPP performance library does not necessarily fill up + * the whole output buffer on each pass, so only dump out the parts + * that have been filled. + * http://trac.osgeo.org/gdal/wiki/JpegIPP + */ + if ( sp->dest.free_in_buffer >= 0 ) { + tif->tif_rawcc = tif->tif_rawdatasize - sp->dest.free_in_buffer; + } +#endif + + TIFFFlushData1(tif); + sp->dest.next_output_byte = (JOCTET*) tif->tif_rawdata; + sp->dest.free_in_buffer = (size_t) tif->tif_rawdatasize; + + return (TRUE); +} + +static void +std_term_destination(j_compress_ptr cinfo) +{ + JPEGState* sp = (JPEGState*) cinfo; + TIFF* tif = sp->tif; + + tif->tif_rawcp = (uint8*) sp->dest.next_output_byte; + tif->tif_rawcc = + tif->tif_rawdatasize - (tmsize_t) sp->dest.free_in_buffer; + /* NB: libtiff does the final buffer flush */ +} + +static void +TIFFjpeg_data_dest(JPEGState* sp, TIFF* tif) +{ + (void) tif; + sp->cinfo.c.dest = &sp->dest; + sp->dest.init_destination = std_init_destination; + sp->dest.empty_output_buffer = std_empty_output_buffer; + sp->dest.term_destination = std_term_destination; +} + +/* + * Alternate destination manager for outputting to JPEGTables field. + */ + +static void +tables_init_destination(j_compress_ptr cinfo) +{ + JPEGState* sp = (JPEGState*) cinfo; + + /* while building, jpegtables_length is allocated buffer size */ + sp->dest.next_output_byte = (JOCTET*) sp->jpegtables; + sp->dest.free_in_buffer = (size_t) sp->jpegtables_length; +} + +static boolean +tables_empty_output_buffer(j_compress_ptr cinfo) +{ + JPEGState* sp = (JPEGState*) cinfo; + void* newbuf; + + /* the entire buffer has been filled; enlarge it by 1000 bytes */ + newbuf = _TIFFrealloc((void*) sp->jpegtables, + (tmsize_t) (sp->jpegtables_length + 1000)); + if (newbuf == NULL) + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 100); + sp->dest.next_output_byte = (JOCTET*) newbuf + sp->jpegtables_length; + sp->dest.free_in_buffer = (size_t) 1000; + sp->jpegtables = newbuf; + sp->jpegtables_length += 1000; + return (TRUE); +} + +static void +tables_term_destination(j_compress_ptr cinfo) +{ + JPEGState* sp = (JPEGState*) cinfo; + + /* set tables length to number of bytes actually emitted */ + sp->jpegtables_length -= (uint32) sp->dest.free_in_buffer; +} + +static int +TIFFjpeg_tables_dest(JPEGState* sp, TIFF* tif) +{ + (void) tif; + /* + * Allocate a working buffer for building tables. + * Initial size is 1000 bytes, which is usually adequate. + */ + if (sp->jpegtables) + _TIFFfree(sp->jpegtables); + sp->jpegtables_length = 1000; + sp->jpegtables = (void*) _TIFFmalloc((tmsize_t) sp->jpegtables_length); + if (sp->jpegtables == NULL) { + sp->jpegtables_length = 0; + TIFFErrorExt(sp->tif->tif_clientdata, "TIFFjpeg_tables_dest", "No space for JPEGTables"); + return (0); + } + sp->cinfo.c.dest = &sp->dest; + sp->dest.init_destination = tables_init_destination; + sp->dest.empty_output_buffer = tables_empty_output_buffer; + sp->dest.term_destination = tables_term_destination; + return (1); +} + +/* + * JPEG library source data manager. + * These routines supply compressed data to libjpeg. + */ + +static void +std_init_source(j_decompress_ptr cinfo) +{ + JPEGState* sp = (JPEGState*) cinfo; + TIFF* tif = sp->tif; + + sp->src.next_input_byte = (const JOCTET*) tif->tif_rawdata; + sp->src.bytes_in_buffer = (size_t) tif->tif_rawcc; +} + +static boolean +std_fill_input_buffer(j_decompress_ptr cinfo) +{ + JPEGState* sp = (JPEGState* ) cinfo; + static const JOCTET dummy_EOI[2] = { 0xFF, JPEG_EOI }; + +#ifdef IPPJ_HUFF + /* + * The Intel IPP performance library does not necessarily read the whole + * input buffer in one pass, so it is possible to get here with data + * yet to read. + * + * We just return without doing anything, until the entire buffer has + * been read. + * http://trac.osgeo.org/gdal/wiki/JpegIPP + */ + if( sp->src.bytes_in_buffer > 0 ) { + return (TRUE); + } +#endif + + /* + * Normally the whole strip/tile is read and so we don't need to do + * a fill. In the case of CHUNKY_STRIP_READ_SUPPORT we might not have + * all the data, but the rawdata is refreshed between scanlines and + * we push this into the io machinery in JPEGDecode(). + * http://trac.osgeo.org/gdal/ticket/3894 + */ + + WARNMS(cinfo, JWRN_JPEG_EOF); + /* insert a fake EOI marker */ + sp->src.next_input_byte = dummy_EOI; + sp->src.bytes_in_buffer = 2; + return (TRUE); +} + +static void +std_skip_input_data(j_decompress_ptr cinfo, long num_bytes) +{ + JPEGState* sp = (JPEGState*) cinfo; + + if (num_bytes > 0) { + if ((size_t)num_bytes > sp->src.bytes_in_buffer) { + /* oops, buffer overrun */ + (void) std_fill_input_buffer(cinfo); + } else { + sp->src.next_input_byte += (size_t) num_bytes; + sp->src.bytes_in_buffer -= (size_t) num_bytes; + } + } +} + +static void +std_term_source(j_decompress_ptr cinfo) +{ + /* No work necessary here */ + (void) cinfo; +} + +static void +TIFFjpeg_data_src(JPEGState* sp, TIFF* tif) +{ + (void) tif; + sp->cinfo.d.src = &sp->src; + sp->src.init_source = std_init_source; + sp->src.fill_input_buffer = std_fill_input_buffer; + sp->src.skip_input_data = std_skip_input_data; + sp->src.resync_to_restart = jpeg_resync_to_restart; + sp->src.term_source = std_term_source; + sp->src.bytes_in_buffer = 0; /* for safety */ + sp->src.next_input_byte = NULL; +} + +/* + * Alternate source manager for reading from JPEGTables. + * We can share all the code except for the init routine. + */ + +static void +tables_init_source(j_decompress_ptr cinfo) +{ + JPEGState* sp = (JPEGState*) cinfo; + + sp->src.next_input_byte = (const JOCTET*) sp->jpegtables; + sp->src.bytes_in_buffer = (size_t) sp->jpegtables_length; +} + +static void +TIFFjpeg_tables_src(JPEGState* sp, TIFF* tif) +{ + TIFFjpeg_data_src(sp, tif); + sp->src.init_source = tables_init_source; +} + +/* + * Allocate downsampled-data buffers needed for downsampled I/O. + * We use values computed in jpeg_start_compress or jpeg_start_decompress. + * We use libjpeg's allocator so that buffers will be released automatically + * when done with strip/tile. + * This is also a handy place to compute samplesperclump, bytesperline. + */ +static int +alloc_downsampled_buffers(TIFF* tif, jpeg_component_info* comp_info, + int num_components) +{ + JPEGState* sp = JState(tif); + int ci; + jpeg_component_info* compptr; + JSAMPARRAY buf; + int samples_per_clump = 0; + + for (ci = 0, compptr = comp_info; ci < num_components; + ci++, compptr++) { + samples_per_clump += compptr->h_samp_factor * + compptr->v_samp_factor; + buf = TIFFjpeg_alloc_sarray(sp, JPOOL_IMAGE, + compptr->width_in_blocks * DCTSIZE, + (JDIMENSION) (compptr->v_samp_factor*DCTSIZE)); + if (buf == NULL) + return (0); + sp->ds_buffer[ci] = buf; + } + sp->samplesperclump = samples_per_clump; + return (1); +} + + +/* + * JPEG Decoding. + */ + +#ifdef CHECK_JPEG_YCBCR_SUBSAMPLING + +#define JPEG_MARKER_SOF0 0xC0 +#define JPEG_MARKER_SOF1 0xC1 +#define JPEG_MARKER_SOF3 0xC3 +#define JPEG_MARKER_DHT 0xC4 +#define JPEG_MARKER_SOI 0xD8 +#define JPEG_MARKER_SOS 0xDA +#define JPEG_MARKER_DQT 0xDB +#define JPEG_MARKER_DRI 0xDD +#define JPEG_MARKER_APP0 0xE0 +#define JPEG_MARKER_COM 0xFE +struct JPEGFixupTagsSubsamplingData +{ + TIFF* tif; + void* buffer; + uint32 buffersize; + uint8* buffercurrentbyte; + uint32 bufferbytesleft; + uint64 fileoffset; + uint64 filebytesleft; + uint8 filepositioned; +}; +static void JPEGFixupTagsSubsampling(TIFF* tif); +static int JPEGFixupTagsSubsamplingSec(struct JPEGFixupTagsSubsamplingData* data); +static int JPEGFixupTagsSubsamplingReadByte(struct JPEGFixupTagsSubsamplingData* data, uint8* result); +static int JPEGFixupTagsSubsamplingReadWord(struct JPEGFixupTagsSubsamplingData* data, uint16* result); +static void JPEGFixupTagsSubsamplingSkip(struct JPEGFixupTagsSubsamplingData* data, uint16 skiplength); + +#endif + +static int +JPEGFixupTags(TIFF* tif) +{ +#ifdef CHECK_JPEG_YCBCR_SUBSAMPLING + if ((tif->tif_dir.td_photometric==PHOTOMETRIC_YCBCR)&& + (tif->tif_dir.td_planarconfig==PLANARCONFIG_CONTIG)&& + (tif->tif_dir.td_samplesperpixel==3)) + JPEGFixupTagsSubsampling(tif); +#endif + + return(1); +} + +#ifdef CHECK_JPEG_YCBCR_SUBSAMPLING + +static void +JPEGFixupTagsSubsampling(TIFF* tif) +{ + /* + * Some JPEG-in-TIFF produces do not emit the YCBCRSUBSAMPLING values in + * the TIFF tags, but still use non-default (2,2) values within the jpeg + * data stream itself. In order for TIFF applications to work properly + * - for instance to get the strip buffer size right - it is imperative + * that the subsampling be available before we start reading the image + * data normally. This function will attempt to analyze the first strip in + * order to get the sampling values from the jpeg data stream. + * + * Note that JPEGPreDeocode() will produce a fairly loud warning when the + * discovered sampling does not match the default sampling (2,2) or whatever + * was actually in the tiff tags. + * + * See the bug in bugzilla for details: + * + * http://bugzilla.remotesensing.org/show_bug.cgi?id=168 + * + * Frank Warmerdam, July 2002 + * Joris Van Damme, May 2007 + */ + static const char module[] = "JPEGFixupTagsSubsampling"; + struct JPEGFixupTagsSubsamplingData m; + + _TIFFFillStriles( tif ); + + if( tif->tif_dir.td_stripbytecount == NULL + || tif->tif_dir.td_stripbytecount[0] == 0 ) + { + /* Do not even try to check if the first strip/tile does not + yet exist, as occurs when GDAL has created a new NULL file + for instance. */ + return; + } + + m.tif=tif; + m.buffersize=2048; + m.buffer=_TIFFmalloc(m.buffersize); + if (m.buffer==NULL) + { + TIFFWarningExt(tif->tif_clientdata,module, + "Unable to allocate memory for auto-correcting of subsampling values; auto-correcting skipped"); + return; + } + m.buffercurrentbyte=NULL; + m.bufferbytesleft=0; + m.fileoffset=tif->tif_dir.td_stripoffset[0]; + m.filepositioned=0; + m.filebytesleft=tif->tif_dir.td_stripbytecount[0]; + if (!JPEGFixupTagsSubsamplingSec(&m)) + TIFFWarningExt(tif->tif_clientdata,module, + "Unable to auto-correct subsampling values, likely corrupt JPEG compressed data in first strip/tile; auto-correcting skipped"); + _TIFFfree(m.buffer); +} + +static int +JPEGFixupTagsSubsamplingSec(struct JPEGFixupTagsSubsamplingData* data) +{ + static const char module[] = "JPEGFixupTagsSubsamplingSec"; + uint8 m; + while (1) + { + while (1) + { + if (!JPEGFixupTagsSubsamplingReadByte(data,&m)) + return(0); + if (m==255) + break; + } + while (1) + { + if (!JPEGFixupTagsSubsamplingReadByte(data,&m)) + return(0); + if (m!=255) + break; + } + switch (m) + { + case JPEG_MARKER_SOI: + /* this type of marker has no data and should be skipped */ + break; + case JPEG_MARKER_COM: + case JPEG_MARKER_APP0: + case JPEG_MARKER_APP0+1: + case JPEG_MARKER_APP0+2: + case JPEG_MARKER_APP0+3: + case JPEG_MARKER_APP0+4: + case JPEG_MARKER_APP0+5: + case JPEG_MARKER_APP0+6: + case JPEG_MARKER_APP0+7: + case JPEG_MARKER_APP0+8: + case JPEG_MARKER_APP0+9: + case JPEG_MARKER_APP0+10: + case JPEG_MARKER_APP0+11: + case JPEG_MARKER_APP0+12: + case JPEG_MARKER_APP0+13: + case JPEG_MARKER_APP0+14: + case JPEG_MARKER_APP0+15: + case JPEG_MARKER_DQT: + case JPEG_MARKER_SOS: + case JPEG_MARKER_DHT: + case JPEG_MARKER_DRI: + /* this type of marker has data, but it has no use to us and should be skipped */ + { + uint16 n; + if (!JPEGFixupTagsSubsamplingReadWord(data,&n)) + return(0); + if (n<2) + return(0); + n-=2; + if (n>0) + JPEGFixupTagsSubsamplingSkip(data,n); + } + break; + case JPEG_MARKER_SOF0: + case JPEG_MARKER_SOF1: + /* this marker contains the subsampling factors we're scanning for */ + { + uint16 n; + uint16 o; + uint8 p; + uint8 ph,pv; + if (!JPEGFixupTagsSubsamplingReadWord(data,&n)) + return(0); + if (n!=8+data->tif->tif_dir.td_samplesperpixel*3) + return(0); + JPEGFixupTagsSubsamplingSkip(data,7); + if (!JPEGFixupTagsSubsamplingReadByte(data,&p)) + return(0); + ph=(p>>4); + pv=(p&15); + JPEGFixupTagsSubsamplingSkip(data,1); + for (o=1; otif->tif_dir.td_samplesperpixel; o++) + { + JPEGFixupTagsSubsamplingSkip(data,1); + if (!JPEGFixupTagsSubsamplingReadByte(data,&p)) + return(0); + if (p!=0x11) + { + TIFFWarningExt(data->tif->tif_clientdata,module, + "Subsampling values inside JPEG compressed data have no TIFF equivalent, auto-correction of TIFF subsampling values failed"); + return(1); + } + JPEGFixupTagsSubsamplingSkip(data,1); + } + if (((ph!=1)&&(ph!=2)&&(ph!=4))||((pv!=1)&&(pv!=2)&&(pv!=4))) + { + TIFFWarningExt(data->tif->tif_clientdata,module, + "Subsampling values inside JPEG compressed data have no TIFF equivalent, auto-correction of TIFF subsampling values failed"); + return(1); + } + if ((ph!=data->tif->tif_dir.td_ycbcrsubsampling[0])||(pv!=data->tif->tif_dir.td_ycbcrsubsampling[1])) + { + TIFFWarningExt(data->tif->tif_clientdata,module, + "Auto-corrected former TIFF subsampling values [%d,%d] to match subsampling values inside JPEG compressed data [%d,%d]", + (int)data->tif->tif_dir.td_ycbcrsubsampling[0], + (int)data->tif->tif_dir.td_ycbcrsubsampling[1], + (int)ph,(int)pv); + data->tif->tif_dir.td_ycbcrsubsampling[0]=ph; + data->tif->tif_dir.td_ycbcrsubsampling[1]=pv; + } + } + return(1); + default: + return(0); + } + } +} + +static int +JPEGFixupTagsSubsamplingReadByte(struct JPEGFixupTagsSubsamplingData* data, uint8* result) +{ + if (data->bufferbytesleft==0) + { + uint32 m; + if (data->filebytesleft==0) + return(0); + if (!data->filepositioned) + { + TIFFSeekFile(data->tif,data->fileoffset,SEEK_SET); + data->filepositioned=1; + } + m=data->buffersize; + if ((uint64)m>data->filebytesleft) + m=(uint32)data->filebytesleft; + assert(m<0x80000000UL); + if (TIFFReadFile(data->tif,data->buffer,(tmsize_t)m)!=(tmsize_t)m) + return(0); + data->buffercurrentbyte=data->buffer; + data->bufferbytesleft=m; + data->fileoffset+=m; + data->filebytesleft-=m; + } + *result=*data->buffercurrentbyte; + data->buffercurrentbyte++; + data->bufferbytesleft--; + return(1); +} + +static int +JPEGFixupTagsSubsamplingReadWord(struct JPEGFixupTagsSubsamplingData* data, uint16* result) +{ + uint8 ma; + uint8 mb; + if (!JPEGFixupTagsSubsamplingReadByte(data,&ma)) + return(0); + if (!JPEGFixupTagsSubsamplingReadByte(data,&mb)) + return(0); + *result=(ma<<8)|mb; + return(1); +} + +static void +JPEGFixupTagsSubsamplingSkip(struct JPEGFixupTagsSubsamplingData* data, uint16 skiplength) +{ + if ((uint32)skiplength<=data->bufferbytesleft) + { + data->buffercurrentbyte+=skiplength; + data->bufferbytesleft-=skiplength; + } + else + { + uint16 m; + m=skiplength-data->bufferbytesleft; + if (m<=data->filebytesleft) + { + data->bufferbytesleft=0; + data->fileoffset+=m; + data->filebytesleft-=m; + data->filepositioned=0; + } + else + { + data->bufferbytesleft=0; + data->filebytesleft=0; + } + } +} + +#endif + + +static int +JPEGSetupDecode(TIFF* tif) +{ + JPEGState* sp = JState(tif); + TIFFDirectory *td = &tif->tif_dir; + +#if defined(JPEG_DUAL_MODE_8_12) && !defined(TIFFInitJPEG) + if( tif->tif_dir.td_bitspersample == 12 ) + return TIFFReInitJPEG_12( tif, COMPRESSION_JPEG, 0 ); +#endif + + JPEGInitializeLibJPEG( tif, TRUE ); + + assert(sp != NULL); + assert(sp->cinfo.comm.is_decompressor); + + /* Read JPEGTables if it is present */ + if (TIFFFieldSet(tif,FIELD_JPEGTABLES)) { + TIFFjpeg_tables_src(sp, tif); + if(TIFFjpeg_read_header(sp,FALSE) != JPEG_HEADER_TABLES_ONLY) { + TIFFErrorExt(tif->tif_clientdata, "JPEGSetupDecode", "Bogus JPEGTables field"); + return (0); + } + } + + /* Grab parameters that are same for all strips/tiles */ + sp->photometric = td->td_photometric; + switch (sp->photometric) { + case PHOTOMETRIC_YCBCR: + sp->h_sampling = td->td_ycbcrsubsampling[0]; + sp->v_sampling = td->td_ycbcrsubsampling[1]; + break; + default: + /* TIFF 6.0 forbids subsampling of all other color spaces */ + sp->h_sampling = 1; + sp->v_sampling = 1; + break; + } + + /* Set up for reading normal data */ + TIFFjpeg_data_src(sp, tif); + tif->tif_postdecode = _TIFFNoPostDecode; /* override byte swapping */ + return (1); +} + +/* + * Set up for decoding a strip or tile. + */ +static int +JPEGPreDecode(TIFF* tif, uint16 s) +{ + JPEGState *sp = JState(tif); + TIFFDirectory *td = &tif->tif_dir; + static const char module[] = "JPEGPreDecode"; + uint32 segment_width, segment_height; + int downsampled_output; + int ci; + + assert(sp != NULL); + + if (sp->cinfo.comm.is_decompressor == 0) + { + tif->tif_setupdecode( tif ); + } + + assert(sp->cinfo.comm.is_decompressor); + /* + * Reset decoder state from any previous strip/tile, + * in case application didn't read the whole strip. + */ + if (!TIFFjpeg_abort(sp)) + return (0); + /* + * Read the header for this strip/tile. + */ + + if (TIFFjpeg_read_header(sp, TRUE) != JPEG_HEADER_OK) + return (0); + + tif->tif_rawcp = (uint8*) sp->src.next_input_byte; + tif->tif_rawcc = sp->src.bytes_in_buffer; + + /* + * Check image parameters and set decompression parameters. + */ + segment_width = td->td_imagewidth; + segment_height = td->td_imagelength - tif->tif_row; + if (isTiled(tif)) { + segment_width = td->td_tilewidth; + segment_height = td->td_tilelength; + sp->bytesperline = TIFFTileRowSize(tif); + } else { + if (segment_height > td->td_rowsperstrip) + segment_height = td->td_rowsperstrip; + sp->bytesperline = TIFFScanlineSize(tif); + } + if (td->td_planarconfig == PLANARCONFIG_SEPARATE && s > 0) { + /* + * For PC 2, scale down the expected strip/tile size + * to match a downsampled component + */ + segment_width = TIFFhowmany_32(segment_width, sp->h_sampling); + segment_height = TIFFhowmany_32(segment_height, sp->v_sampling); + } + if (sp->cinfo.d.image_width < segment_width || + sp->cinfo.d.image_height < segment_height) { + TIFFWarningExt(tif->tif_clientdata, module, + "Improper JPEG strip/tile size, " + "expected %dx%d, got %dx%d", + segment_width, segment_height, + sp->cinfo.d.image_width, + sp->cinfo.d.image_height); + } + if (sp->cinfo.d.image_width > segment_width || + sp->cinfo.d.image_height > segment_height) { + /* + * This case could be dangerous, if the strip or tile size has + * been reported as less than the amount of data jpeg will + * return, some potential security issues arise. Catch this + * case and error out. + */ + TIFFErrorExt(tif->tif_clientdata, module, + "JPEG strip/tile size exceeds expected dimensions," + " expected %dx%d, got %dx%d", + segment_width, segment_height, + sp->cinfo.d.image_width, sp->cinfo.d.image_height); + return (0); + } + if (sp->cinfo.d.num_components != + (td->td_planarconfig == PLANARCONFIG_CONTIG ? + td->td_samplesperpixel : 1)) { + TIFFErrorExt(tif->tif_clientdata, module, "Improper JPEG component count"); + return (0); + } +#ifdef JPEG_LIB_MK1 + if (12 != td->td_bitspersample && 8 != td->td_bitspersample) { + TIFFErrorExt(tif->tif_clientdata, module, "Improper JPEG data precision"); + return (0); + } + sp->cinfo.d.data_precision = td->td_bitspersample; + sp->cinfo.d.bits_in_jsample = td->td_bitspersample; +#else + if (sp->cinfo.d.data_precision != td->td_bitspersample) { + TIFFErrorExt(tif->tif_clientdata, module, "Improper JPEG data precision"); + return (0); + } +#endif + if (td->td_planarconfig == PLANARCONFIG_CONTIG) { + /* Component 0 should have expected sampling factors */ + if (sp->cinfo.d.comp_info[0].h_samp_factor != sp->h_sampling || + sp->cinfo.d.comp_info[0].v_samp_factor != sp->v_sampling) { + TIFFErrorExt(tif->tif_clientdata, module, + "Improper JPEG sampling factors %d,%d\n" + "Apparently should be %d,%d.", + sp->cinfo.d.comp_info[0].h_samp_factor, + sp->cinfo.d.comp_info[0].v_samp_factor, + sp->h_sampling, sp->v_sampling); + return (0); + } + /* Rest should have sampling factors 1,1 */ + for (ci = 1; ci < sp->cinfo.d.num_components; ci++) { + if (sp->cinfo.d.comp_info[ci].h_samp_factor != 1 || + sp->cinfo.d.comp_info[ci].v_samp_factor != 1) { + TIFFErrorExt(tif->tif_clientdata, module, "Improper JPEG sampling factors"); + return (0); + } + } + } else { + /* PC 2's single component should have sampling factors 1,1 */ + if (sp->cinfo.d.comp_info[0].h_samp_factor != 1 || + sp->cinfo.d.comp_info[0].v_samp_factor != 1) { + TIFFErrorExt(tif->tif_clientdata, module, "Improper JPEG sampling factors"); + return (0); + } + } + downsampled_output = FALSE; + if (td->td_planarconfig == PLANARCONFIG_CONTIG && + sp->photometric == PHOTOMETRIC_YCBCR && + sp->jpegcolormode == JPEGCOLORMODE_RGB) { + /* Convert YCbCr to RGB */ + sp->cinfo.d.jpeg_color_space = JCS_YCbCr; + sp->cinfo.d.out_color_space = JCS_RGB; + } else { + /* Suppress colorspace handling */ + sp->cinfo.d.jpeg_color_space = JCS_UNKNOWN; + sp->cinfo.d.out_color_space = JCS_UNKNOWN; + if (td->td_planarconfig == PLANARCONFIG_CONTIG && + (sp->h_sampling != 1 || sp->v_sampling != 1)) + downsampled_output = TRUE; + /* XXX what about up-sampling? */ + } + if (downsampled_output) { + /* Need to use raw-data interface to libjpeg */ + sp->cinfo.d.raw_data_out = TRUE; +#if JPEG_LIB_VERSION >= 70 + sp->cinfo.d.do_fancy_upsampling = FALSE; +#endif /* JPEG_LIB_VERSION >= 70 */ + tif->tif_decoderow = DecodeRowError; + tif->tif_decodestrip = JPEGDecodeRaw; + tif->tif_decodetile = JPEGDecodeRaw; + } else { + /* Use normal interface to libjpeg */ + sp->cinfo.d.raw_data_out = FALSE; + tif->tif_decoderow = JPEGDecode; + tif->tif_decodestrip = JPEGDecode; + tif->tif_decodetile = JPEGDecode; + } + /* Start JPEG decompressor */ + if (!TIFFjpeg_start_decompress(sp)) + return (0); + /* Allocate downsampled-data buffers if needed */ + if (downsampled_output) { + if (!alloc_downsampled_buffers(tif, sp->cinfo.d.comp_info, + sp->cinfo.d.num_components)) + return (0); + sp->scancount = DCTSIZE; /* mark buffer empty */ + } + return (1); +} + +/* + * Decode a chunk of pixels. + * "Standard" case: returned data is not downsampled. + */ +/*ARGSUSED*/ static int +JPEGDecode(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s) +{ + JPEGState *sp = JState(tif); + tmsize_t nrows; + (void) s; + + /* + ** Update available information, buffer may have been refilled + ** between decode requests + */ + sp->src.next_input_byte = (const JOCTET*) tif->tif_rawcp; + sp->src.bytes_in_buffer = (size_t) tif->tif_rawcc; + + if( sp->bytesperline == 0 ) + return 0; + + nrows = cc / sp->bytesperline; + if (cc % sp->bytesperline) + TIFFWarningExt(tif->tif_clientdata, tif->tif_name, "fractional scanline not read"); + + if( nrows > (tmsize_t) sp->cinfo.d.image_height ) + nrows = sp->cinfo.d.image_height; + + /* data is expected to be read in multiples of a scanline */ + if (nrows) + { + JSAMPROW line_work_buf = NULL; + + /* + * For 6B, only use temporary buffer for 12 bit imagery. + * For Mk1 always use it. + */ +#if !defined(JPEG_LIB_MK1) + if( sp->cinfo.d.data_precision == 12 ) +#endif + { + line_work_buf = (JSAMPROW) + _TIFFmalloc(sizeof(short) * sp->cinfo.d.output_width + * sp->cinfo.d.num_components ); + } + + do { + if( line_work_buf != NULL ) + { + /* + * In the MK1 case, we aways read into a 16bit buffer, and then + * pack down to 12bit or 8bit. In 6B case we only read into 16 + * bit buffer for 12bit data, which we need to repack. + */ + if (TIFFjpeg_read_scanlines(sp, &line_work_buf, 1) != 1) + return (0); + + if( sp->cinfo.d.data_precision == 12 ) + { + int value_pairs = (sp->cinfo.d.output_width + * sp->cinfo.d.num_components) / 2; + int iPair; + + for( iPair = 0; iPair < value_pairs; iPair++ ) + { + unsigned char *out_ptr = + ((unsigned char *) buf) + iPair * 3; + JSAMPLE *in_ptr = line_work_buf + iPair * 2; + + out_ptr[0] = (in_ptr[0] & 0xff0) >> 4; + out_ptr[1] = ((in_ptr[0] & 0xf) << 4) + | ((in_ptr[1] & 0xf00) >> 8); + out_ptr[2] = ((in_ptr[1] & 0xff) >> 0); + } + } + else if( sp->cinfo.d.data_precision == 8 ) + { + int value_count = (sp->cinfo.d.output_width + * sp->cinfo.d.num_components); + int iValue; + + for( iValue = 0; iValue < value_count; iValue++ ) + { + ((unsigned char *) buf)[iValue] = + line_work_buf[iValue] & 0xff; + } + } + } + else + { + /* + * In the libjpeg6b 8bit case. We read directly into the + * TIFF buffer. + */ + JSAMPROW bufptr = (JSAMPROW)buf; + + if (TIFFjpeg_read_scanlines(sp, &bufptr, 1) != 1) + return (0); + } + + ++tif->tif_row; + buf += sp->bytesperline; + cc -= sp->bytesperline; + } while (--nrows > 0); + + if( line_work_buf != NULL ) + _TIFFfree( line_work_buf ); + } + + /* Update information on consumed data */ + tif->tif_rawcp = (uint8*) sp->src.next_input_byte; + tif->tif_rawcc = sp->src.bytes_in_buffer; + + /* Close down the decompressor if we've finished the strip or tile. */ + return sp->cinfo.d.output_scanline < sp->cinfo.d.output_height + || TIFFjpeg_finish_decompress(sp); +} + +/*ARGSUSED*/ static int +DecodeRowError(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s) + +{ + (void) buf; + (void) cc; + (void) s; + + TIFFErrorExt(tif->tif_clientdata, "TIFFReadScanline", + "scanline oriented access is not supported for downsampled JPEG compressed images, consider enabling TIFF_JPEGCOLORMODE as JPEGCOLORMODE_RGB." ); + return 0; +} + +/* + * Decode a chunk of pixels. + * Returned data is downsampled per sampling factors. + */ +/*ARGSUSED*/ static int +JPEGDecodeRaw(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s) +{ + JPEGState *sp = JState(tif); + tmsize_t nrows; + (void) s; + + /* data is expected to be read in multiples of a scanline */ + if ( (nrows = sp->cinfo.d.image_height) ) { + + /* Cb,Cr both have sampling factors 1, so this is correct */ + JDIMENSION clumps_per_line = sp->cinfo.d.comp_info[1].downsampled_width; + int samples_per_clump = sp->samplesperclump; + +#if defined(JPEG_LIB_MK1_OR_12BIT) + unsigned short* tmpbuf = _TIFFmalloc(sizeof(unsigned short) * + sp->cinfo.d.output_width * + sp->cinfo.d.num_components); + if(tmpbuf==NULL) { + TIFFErrorExt(tif->tif_clientdata, "JPEGDecodeRaw", + "Out of memory"); + return 0; + } +#endif + + do { + jpeg_component_info *compptr; + int ci, clumpoffset; + + if( cc < sp->bytesperline ) { + TIFFErrorExt(tif->tif_clientdata, "JPEGDecodeRaw", + "application buffer not large enough for all data."); + return 0; + } + + /* Reload downsampled-data buffer if needed */ + if (sp->scancount >= DCTSIZE) { + int n = sp->cinfo.d.max_v_samp_factor * DCTSIZE; + if (TIFFjpeg_read_raw_data(sp, sp->ds_buffer, n) != n) + return (0); + sp->scancount = 0; + } + /* + * Fastest way to unseparate data is to make one pass + * over the scanline for each row of each component. + */ + clumpoffset = 0; /* first sample in clump */ + for (ci = 0, compptr = sp->cinfo.d.comp_info; + ci < sp->cinfo.d.num_components; + ci++, compptr++) { + int hsamp = compptr->h_samp_factor; + int vsamp = compptr->v_samp_factor; + int ypos; + + for (ypos = 0; ypos < vsamp; ypos++) { + JSAMPLE *inptr = sp->ds_buffer[ci][sp->scancount*vsamp + ypos]; + JDIMENSION nclump; +#if defined(JPEG_LIB_MK1_OR_12BIT) + JSAMPLE *outptr = (JSAMPLE*)tmpbuf + clumpoffset; +#else + JSAMPLE *outptr = (JSAMPLE*)buf + clumpoffset; + if (cc < (tmsize_t) (clumpoffset + samples_per_clump*(clumps_per_line-1) + hsamp)) { + TIFFErrorExt(tif->tif_clientdata, "JPEGDecodeRaw", + "application buffer not large enough for all data, possible subsampling issue"); + return 0; + } +#endif + + if (hsamp == 1) { + /* fast path for at least Cb and Cr */ + for (nclump = clumps_per_line; nclump-- > 0; ) { + outptr[0] = *inptr++; + outptr += samples_per_clump; + } + } else { + int xpos; + + /* general case */ + for (nclump = clumps_per_line; nclump-- > 0; ) { + for (xpos = 0; xpos < hsamp; xpos++) + outptr[xpos] = *inptr++; + outptr += samples_per_clump; + } + } + clumpoffset += hsamp; + } + } + +#if defined(JPEG_LIB_MK1_OR_12BIT) + { + if (sp->cinfo.d.data_precision == 8) + { + int i=0; + int len = sp->cinfo.d.output_width * sp->cinfo.d.num_components; + for (i=0; icinfo.d.output_width + * sp->cinfo.d.num_components) / 2; + int iPair; + for( iPair = 0; iPair < value_pairs; iPair++ ) + { + unsigned char *out_ptr = ((unsigned char *) buf) + iPair * 3; + JSAMPLE *in_ptr = (JSAMPLE *) (tmpbuf + iPair * 2); + out_ptr[0] = (in_ptr[0] & 0xff0) >> 4; + out_ptr[1] = ((in_ptr[0] & 0xf) << 4) + | ((in_ptr[1] & 0xf00) >> 8); + out_ptr[2] = ((in_ptr[1] & 0xff) >> 0); + } + } + } +#endif + + sp->scancount ++; + tif->tif_row += sp->v_sampling; + + buf += sp->bytesperline; + cc -= sp->bytesperline; + + nrows -= sp->v_sampling; + } while (nrows > 0); + +#if defined(JPEG_LIB_MK1_OR_12BIT) + _TIFFfree(tmpbuf); +#endif + + } + + /* Close down the decompressor if done. */ + return sp->cinfo.d.output_scanline < sp->cinfo.d.output_height + || TIFFjpeg_finish_decompress(sp); +} + + +/* + * JPEG Encoding. + */ + +static void +unsuppress_quant_table (JPEGState* sp, int tblno) +{ + JQUANT_TBL* qtbl; + + if ((qtbl = sp->cinfo.c.quant_tbl_ptrs[tblno]) != NULL) + qtbl->sent_table = FALSE; +} + +static void +unsuppress_huff_table (JPEGState* sp, int tblno) +{ + JHUFF_TBL* htbl; + + if ((htbl = sp->cinfo.c.dc_huff_tbl_ptrs[tblno]) != NULL) + htbl->sent_table = FALSE; + if ((htbl = sp->cinfo.c.ac_huff_tbl_ptrs[tblno]) != NULL) + htbl->sent_table = FALSE; +} + +static int +prepare_JPEGTables(TIFF* tif) +{ + JPEGState* sp = JState(tif); + + /* Initialize quant tables for current quality setting */ + if (!TIFFjpeg_set_quality(sp, sp->jpegquality, FALSE)) + return (0); + /* Mark only the tables we want for output */ + /* NB: chrominance tables are currently used only with YCbCr */ + if (!TIFFjpeg_suppress_tables(sp, TRUE)) + return (0); + if (sp->jpegtablesmode & JPEGTABLESMODE_QUANT) { + unsuppress_quant_table(sp, 0); + if (sp->photometric == PHOTOMETRIC_YCBCR) + unsuppress_quant_table(sp, 1); + } + if (sp->jpegtablesmode & JPEGTABLESMODE_HUFF) { + unsuppress_huff_table(sp, 0); + if (sp->photometric == PHOTOMETRIC_YCBCR) + unsuppress_huff_table(sp, 1); + } + /* Direct libjpeg output into jpegtables */ + if (!TIFFjpeg_tables_dest(sp, tif)) + return (0); + /* Emit tables-only datastream */ + if (!TIFFjpeg_write_tables(sp)) + return (0); + + return (1); +} + +static int +JPEGSetupEncode(TIFF* tif) +{ + JPEGState* sp = JState(tif); + TIFFDirectory *td = &tif->tif_dir; + static const char module[] = "JPEGSetupEncode"; + +#if defined(JPEG_DUAL_MODE_8_12) && !defined(TIFFInitJPEG) + if( tif->tif_dir.td_bitspersample == 12 ) + return TIFFReInitJPEG_12( tif, COMPRESSION_JPEG, 1 ); +#endif + + JPEGInitializeLibJPEG( tif, FALSE ); + + assert(sp != NULL); + assert(!sp->cinfo.comm.is_decompressor); + + /* + * Initialize all JPEG parameters to default values. + * Note that jpeg_set_defaults needs legal values for + * in_color_space and input_components. + */ + sp->cinfo.c.in_color_space = JCS_UNKNOWN; + sp->cinfo.c.input_components = 1; + if (!TIFFjpeg_set_defaults(sp)) + return (0); + /* Set per-file parameters */ + sp->photometric = td->td_photometric; + switch (sp->photometric) { + case PHOTOMETRIC_YCBCR: + sp->h_sampling = td->td_ycbcrsubsampling[0]; + sp->v_sampling = td->td_ycbcrsubsampling[1]; + /* + * A ReferenceBlackWhite field *must* be present since the + * default value is inappropriate for YCbCr. Fill in the + * proper value if application didn't set it. + */ + { + float *ref; + if (!TIFFGetField(tif, TIFFTAG_REFERENCEBLACKWHITE, + &ref)) { + float refbw[6]; + long top = 1L << td->td_bitspersample; + refbw[0] = 0; + refbw[1] = (float)(top-1L); + refbw[2] = (float)(top>>1); + refbw[3] = refbw[1]; + refbw[4] = refbw[2]; + refbw[5] = refbw[1]; + TIFFSetField(tif, TIFFTAG_REFERENCEBLACKWHITE, + refbw); + } + } + break; + case PHOTOMETRIC_PALETTE: /* disallowed by Tech Note */ + case PHOTOMETRIC_MASK: + TIFFErrorExt(tif->tif_clientdata, module, + "PhotometricInterpretation %d not allowed for JPEG", + (int) sp->photometric); + return (0); + default: + /* TIFF 6.0 forbids subsampling of all other color spaces */ + sp->h_sampling = 1; + sp->v_sampling = 1; + break; + } + + /* Verify miscellaneous parameters */ + + /* + * This would need work if libtiff ever supports different + * depths for different components, or if libjpeg ever supports + * run-time selection of depth. Neither is imminent. + */ +#ifdef JPEG_LIB_MK1 + /* BITS_IN_JSAMPLE now permits 8 and 12 --- dgilbert */ + if (td->td_bitspersample != 8 && td->td_bitspersample != 12) +#else + if (td->td_bitspersample != BITS_IN_JSAMPLE ) +#endif + { + TIFFErrorExt(tif->tif_clientdata, module, "BitsPerSample %d not allowed for JPEG", + (int) td->td_bitspersample); + return (0); + } + sp->cinfo.c.data_precision = td->td_bitspersample; +#ifdef JPEG_LIB_MK1 + sp->cinfo.c.bits_in_jsample = td->td_bitspersample; +#endif + if (isTiled(tif)) { + if ((td->td_tilelength % (sp->v_sampling * DCTSIZE)) != 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "JPEG tile height must be multiple of %d", + sp->v_sampling * DCTSIZE); + return (0); + } + if ((td->td_tilewidth % (sp->h_sampling * DCTSIZE)) != 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "JPEG tile width must be multiple of %d", + sp->h_sampling * DCTSIZE); + return (0); + } + } else { + if (td->td_rowsperstrip < td->td_imagelength && + (td->td_rowsperstrip % (sp->v_sampling * DCTSIZE)) != 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "RowsPerStrip must be multiple of %d for JPEG", + sp->v_sampling * DCTSIZE); + return (0); + } + } + + /* Create a JPEGTables field if appropriate */ + if (sp->jpegtablesmode & (JPEGTABLESMODE_QUANT|JPEGTABLESMODE_HUFF)) { + if( sp->jpegtables == NULL + || memcmp(sp->jpegtables,"\0\0\0\0\0\0\0\0\0",8) == 0 ) + { + if (!prepare_JPEGTables(tif)) + return (0); + /* Mark the field present */ + /* Can't use TIFFSetField since BEENWRITING is already set! */ + tif->tif_flags |= TIFF_DIRTYDIRECT; + TIFFSetFieldBit(tif, FIELD_JPEGTABLES); + } + } else { + /* We do not support application-supplied JPEGTables, */ + /* so mark the field not present */ + TIFFClrFieldBit(tif, FIELD_JPEGTABLES); + } + + /* Direct libjpeg output to libtiff's output buffer */ + TIFFjpeg_data_dest(sp, tif); + + return (1); +} + +/* + * Set encoding state at the start of a strip or tile. + */ +static int +JPEGPreEncode(TIFF* tif, uint16 s) +{ + JPEGState *sp = JState(tif); + TIFFDirectory *td = &tif->tif_dir; + static const char module[] = "JPEGPreEncode"; + uint32 segment_width, segment_height; + int downsampled_input; + + assert(sp != NULL); + + if (sp->cinfo.comm.is_decompressor == 1) + { + tif->tif_setupencode( tif ); + } + + assert(!sp->cinfo.comm.is_decompressor); + /* + * Set encoding parameters for this strip/tile. + */ + if (isTiled(tif)) { + segment_width = td->td_tilewidth; + segment_height = td->td_tilelength; + sp->bytesperline = TIFFTileRowSize(tif); + } else { + segment_width = td->td_imagewidth; + segment_height = td->td_imagelength - tif->tif_row; + if (segment_height > td->td_rowsperstrip) + segment_height = td->td_rowsperstrip; + sp->bytesperline = TIFFScanlineSize(tif); + } + if (td->td_planarconfig == PLANARCONFIG_SEPARATE && s > 0) { + /* for PC 2, scale down the strip/tile size + * to match a downsampled component + */ + segment_width = TIFFhowmany_32(segment_width, sp->h_sampling); + segment_height = TIFFhowmany_32(segment_height, sp->v_sampling); + } + if (segment_width > 65535 || segment_height > 65535) { + TIFFErrorExt(tif->tif_clientdata, module, "Strip/tile too large for JPEG"); + return (0); + } + sp->cinfo.c.image_width = segment_width; + sp->cinfo.c.image_height = segment_height; + downsampled_input = FALSE; + if (td->td_planarconfig == PLANARCONFIG_CONTIG) { + sp->cinfo.c.input_components = td->td_samplesperpixel; + if (sp->photometric == PHOTOMETRIC_YCBCR) { + if (sp->jpegcolormode == JPEGCOLORMODE_RGB) { + sp->cinfo.c.in_color_space = JCS_RGB; + } else { + sp->cinfo.c.in_color_space = JCS_YCbCr; + if (sp->h_sampling != 1 || sp->v_sampling != 1) + downsampled_input = TRUE; + } + if (!TIFFjpeg_set_colorspace(sp, JCS_YCbCr)) + return (0); + /* + * Set Y sampling factors; + * we assume jpeg_set_colorspace() set the rest to 1 + */ + sp->cinfo.c.comp_info[0].h_samp_factor = sp->h_sampling; + sp->cinfo.c.comp_info[0].v_samp_factor = sp->v_sampling; + } else { + if ((td->td_photometric == PHOTOMETRIC_MINISWHITE || td->td_photometric == PHOTOMETRIC_MINISBLACK) && td->td_samplesperpixel == 1) + sp->cinfo.c.in_color_space = JCS_GRAYSCALE; + else if (td->td_photometric == PHOTOMETRIC_RGB && td->td_samplesperpixel == 3) + sp->cinfo.c.in_color_space = JCS_RGB; + else if (td->td_photometric == PHOTOMETRIC_SEPARATED && td->td_samplesperpixel == 4) + sp->cinfo.c.in_color_space = JCS_CMYK; + else + sp->cinfo.c.in_color_space = JCS_UNKNOWN; + if (!TIFFjpeg_set_colorspace(sp, sp->cinfo.c.in_color_space)) + return (0); + /* jpeg_set_colorspace set all sampling factors to 1 */ + } + } else { + sp->cinfo.c.input_components = 1; + sp->cinfo.c.in_color_space = JCS_UNKNOWN; + if (!TIFFjpeg_set_colorspace(sp, JCS_UNKNOWN)) + return (0); + sp->cinfo.c.comp_info[0].component_id = s; + /* jpeg_set_colorspace() set sampling factors to 1 */ + if (sp->photometric == PHOTOMETRIC_YCBCR && s > 0) { + sp->cinfo.c.comp_info[0].quant_tbl_no = 1; + sp->cinfo.c.comp_info[0].dc_tbl_no = 1; + sp->cinfo.c.comp_info[0].ac_tbl_no = 1; + } + } + /* ensure libjpeg won't write any extraneous markers */ + sp->cinfo.c.write_JFIF_header = FALSE; + sp->cinfo.c.write_Adobe_marker = FALSE; + /* set up table handling correctly */ + if (!TIFFjpeg_set_quality(sp, sp->jpegquality, FALSE)) + return (0); + if (! (sp->jpegtablesmode & JPEGTABLESMODE_QUANT)) { + unsuppress_quant_table(sp, 0); + unsuppress_quant_table(sp, 1); + } + if (sp->jpegtablesmode & JPEGTABLESMODE_HUFF) + sp->cinfo.c.optimize_coding = FALSE; + else + sp->cinfo.c.optimize_coding = TRUE; + if (downsampled_input) { + /* Need to use raw-data interface to libjpeg */ + sp->cinfo.c.raw_data_in = TRUE; + tif->tif_encoderow = JPEGEncodeRaw; + tif->tif_encodestrip = JPEGEncodeRaw; + tif->tif_encodetile = JPEGEncodeRaw; + } else { + /* Use normal interface to libjpeg */ + sp->cinfo.c.raw_data_in = FALSE; + tif->tif_encoderow = JPEGEncode; + tif->tif_encodestrip = JPEGEncode; + tif->tif_encodetile = JPEGEncode; + } + /* Start JPEG compressor */ + if (!TIFFjpeg_start_compress(sp, FALSE)) + return (0); + /* Allocate downsampled-data buffers if needed */ + if (downsampled_input) { + if (!alloc_downsampled_buffers(tif, sp->cinfo.c.comp_info, + sp->cinfo.c.num_components)) + return (0); + } + sp->scancount = 0; + + return (1); +} + +/* + * Encode a chunk of pixels. + * "Standard" case: incoming data is not downsampled. + */ +static int +JPEGEncode(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s) +{ + JPEGState *sp = JState(tif); + tmsize_t nrows; + JSAMPROW bufptr[1]; + short *line16 = NULL; + int line16_count = 0; + + (void) s; + assert(sp != NULL); + /* data is expected to be supplied in multiples of a scanline */ + nrows = cc / sp->bytesperline; + if (cc % sp->bytesperline) + TIFFWarningExt(tif->tif_clientdata, tif->tif_name, + "fractional scanline discarded"); + + /* The last strip will be limited to image size */ + if( !isTiled(tif) && tif->tif_row+nrows > tif->tif_dir.td_imagelength ) + nrows = tif->tif_dir.td_imagelength - tif->tif_row; + + if( sp->cinfo.c.data_precision == 12 ) + { + line16_count = (sp->bytesperline * 2) / 3; + line16 = (short *) _TIFFmalloc(sizeof(short) * line16_count); + // FIXME: undiagnosed malloc failure + } + + while (nrows-- > 0) { + + if( sp->cinfo.c.data_precision == 12 ) + { + + int value_pairs = line16_count / 2; + int iPair; + + bufptr[0] = (JSAMPROW) line16; + + for( iPair = 0; iPair < value_pairs; iPair++ ) + { + unsigned char *in_ptr = + ((unsigned char *) buf) + iPair * 3; + JSAMPLE *out_ptr = (JSAMPLE *) (line16 + iPair * 2); + + out_ptr[0] = (in_ptr[0] << 4) | ((in_ptr[1] & 0xf0) >> 4); + out_ptr[1] = ((in_ptr[1] & 0x0f) << 8) | in_ptr[2]; + } + } + else + { + bufptr[0] = (JSAMPROW) buf; + } + if (TIFFjpeg_write_scanlines(sp, bufptr, 1) != 1) + return (0); + if (nrows > 0) + tif->tif_row++; + buf += sp->bytesperline; + } + + if( sp->cinfo.c.data_precision == 12 ) + { + _TIFFfree( line16 ); + } + + return (1); +} + +/* + * Encode a chunk of pixels. + * Incoming data is expected to be downsampled per sampling factors. + */ +static int +JPEGEncodeRaw(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s) +{ + JPEGState *sp = JState(tif); + JSAMPLE* inptr; + JSAMPLE* outptr; + tmsize_t nrows; + JDIMENSION clumps_per_line, nclump; + int clumpoffset, ci, xpos, ypos; + jpeg_component_info* compptr; + int samples_per_clump = sp->samplesperclump; + tmsize_t bytesperclumpline; + + (void) s; + assert(sp != NULL); + /* data is expected to be supplied in multiples of a clumpline */ + /* a clumpline is equivalent to v_sampling desubsampled scanlines */ + /* TODO: the following calculation of bytesperclumpline, should substitute calculation of sp->bytesperline, except that it is per v_sampling lines */ + bytesperclumpline = (((sp->cinfo.c.image_width+sp->h_sampling-1)/sp->h_sampling) + *(sp->h_sampling*sp->v_sampling+2)*sp->cinfo.c.data_precision+7) + /8; + + nrows = ( cc / bytesperclumpline ) * sp->v_sampling; + if (cc % bytesperclumpline) + TIFFWarningExt(tif->tif_clientdata, tif->tif_name, "fractional scanline discarded"); + + /* Cb,Cr both have sampling factors 1, so this is correct */ + clumps_per_line = sp->cinfo.c.comp_info[1].downsampled_width; + + while (nrows > 0) { + /* + * Fastest way to separate the data is to make one pass + * over the scanline for each row of each component. + */ + clumpoffset = 0; /* first sample in clump */ + for (ci = 0, compptr = sp->cinfo.c.comp_info; + ci < sp->cinfo.c.num_components; + ci++, compptr++) { + int hsamp = compptr->h_samp_factor; + int vsamp = compptr->v_samp_factor; + int padding = (int) (compptr->width_in_blocks * DCTSIZE - + clumps_per_line * hsamp); + for (ypos = 0; ypos < vsamp; ypos++) { + inptr = ((JSAMPLE*) buf) + clumpoffset; + outptr = sp->ds_buffer[ci][sp->scancount*vsamp + ypos]; + if (hsamp == 1) { + /* fast path for at least Cb and Cr */ + for (nclump = clumps_per_line; nclump-- > 0; ) { + *outptr++ = inptr[0]; + inptr += samples_per_clump; + } + } else { + /* general case */ + for (nclump = clumps_per_line; nclump-- > 0; ) { + for (xpos = 0; xpos < hsamp; xpos++) + *outptr++ = inptr[xpos]; + inptr += samples_per_clump; + } + } + /* pad each scanline as needed */ + for (xpos = 0; xpos < padding; xpos++) { + *outptr = outptr[-1]; + outptr++; + } + clumpoffset += hsamp; + } + } + sp->scancount++; + if (sp->scancount >= DCTSIZE) { + int n = sp->cinfo.c.max_v_samp_factor * DCTSIZE; + if (TIFFjpeg_write_raw_data(sp, sp->ds_buffer, n) != n) + return (0); + sp->scancount = 0; + } + tif->tif_row += sp->v_sampling; + buf += bytesperclumpline; + nrows -= sp->v_sampling; + } + return (1); +} + +/* + * Finish up at the end of a strip or tile. + */ +static int +JPEGPostEncode(TIFF* tif) +{ + JPEGState *sp = JState(tif); + + if (sp->scancount > 0) { + /* + * Need to emit a partial bufferload of downsampled data. + * Pad the data vertically. + */ + int ci, ypos, n; + jpeg_component_info* compptr; + + for (ci = 0, compptr = sp->cinfo.c.comp_info; + ci < sp->cinfo.c.num_components; + ci++, compptr++) { + int vsamp = compptr->v_samp_factor; + tmsize_t row_width = compptr->width_in_blocks * DCTSIZE + * sizeof(JSAMPLE); + for (ypos = sp->scancount * vsamp; + ypos < DCTSIZE * vsamp; ypos++) { + _TIFFmemcpy((void*)sp->ds_buffer[ci][ypos], + (void*)sp->ds_buffer[ci][ypos-1], + row_width); + + } + } + n = sp->cinfo.c.max_v_samp_factor * DCTSIZE; + if (TIFFjpeg_write_raw_data(sp, sp->ds_buffer, n) != n) + return (0); + } + + return (TIFFjpeg_finish_compress(JState(tif))); +} + +static void +JPEGCleanup(TIFF* tif) +{ + JPEGState *sp = JState(tif); + + assert(sp != 0); + + tif->tif_tagmethods.vgetfield = sp->vgetparent; + tif->tif_tagmethods.vsetfield = sp->vsetparent; + tif->tif_tagmethods.printdir = sp->printdir; + + if( sp != NULL ) { + if( sp->cinfo_initialized ) + TIFFjpeg_destroy(sp); /* release libjpeg resources */ + if (sp->jpegtables) /* tag value */ + _TIFFfree(sp->jpegtables); + } + _TIFFfree(tif->tif_data); /* release local state */ + tif->tif_data = NULL; + + _TIFFSetDefaultCompressionState(tif); +} + +static void +JPEGResetUpsampled( TIFF* tif ) +{ + JPEGState* sp = JState(tif); + TIFFDirectory* td = &tif->tif_dir; + + /* + * Mark whether returned data is up-sampled or not so TIFFStripSize + * and TIFFTileSize return values that reflect the true amount of + * data. + */ + tif->tif_flags &= ~TIFF_UPSAMPLED; + if (td->td_planarconfig == PLANARCONFIG_CONTIG) { + if (td->td_photometric == PHOTOMETRIC_YCBCR && + sp->jpegcolormode == JPEGCOLORMODE_RGB) { + tif->tif_flags |= TIFF_UPSAMPLED; + } else { +#ifdef notdef + if (td->td_ycbcrsubsampling[0] != 1 || + td->td_ycbcrsubsampling[1] != 1) + ; /* XXX what about up-sampling? */ +#endif + } + } + + /* + * Must recalculate cached tile size in case sampling state changed. + * Should we really be doing this now if image size isn't set? + */ + if( tif->tif_tilesize > 0 ) + tif->tif_tilesize = isTiled(tif) ? TIFFTileSize(tif) : (tmsize_t)(-1); + if( tif->tif_scanlinesize > 0 ) + tif->tif_scanlinesize = TIFFScanlineSize(tif); +} + +static int +JPEGVSetField(TIFF* tif, uint32 tag, va_list ap) +{ + JPEGState* sp = JState(tif); + const TIFFField* fip; + uint32 v32; + + assert(sp != NULL); + + switch (tag) { + case TIFFTAG_JPEGTABLES: + v32 = (uint32) va_arg(ap, uint32); + if (v32 == 0) { + /* XXX */ + return (0); + } + _TIFFsetByteArray(&sp->jpegtables, va_arg(ap, void*), + (long) v32); + sp->jpegtables_length = v32; + TIFFSetFieldBit(tif, FIELD_JPEGTABLES); + break; + case TIFFTAG_JPEGQUALITY: + sp->jpegquality = (int) va_arg(ap, int); + return (1); /* pseudo tag */ + case TIFFTAG_JPEGCOLORMODE: + sp->jpegcolormode = (int) va_arg(ap, int); + JPEGResetUpsampled( tif ); + return (1); /* pseudo tag */ + case TIFFTAG_PHOTOMETRIC: + { + int ret_value = (*sp->vsetparent)(tif, tag, ap); + JPEGResetUpsampled( tif ); + return ret_value; + } + case TIFFTAG_JPEGTABLESMODE: + sp->jpegtablesmode = (int) va_arg(ap, int); + return (1); /* pseudo tag */ + case TIFFTAG_YCBCRSUBSAMPLING: + /* mark the fact that we have a real ycbcrsubsampling! */ + sp->ycbcrsampling_fetched = 1; + /* should we be recomputing upsampling info here? */ + return (*sp->vsetparent)(tif, tag, ap); + default: + return (*sp->vsetparent)(tif, tag, ap); + } + + if ((fip = TIFFFieldWithTag(tif, tag))) { + TIFFSetFieldBit(tif, fip->field_bit); + } else { + return (0); + } + + tif->tif_flags |= TIFF_DIRTYDIRECT; + return (1); +} + +static int +JPEGVGetField(TIFF* tif, uint32 tag, va_list ap) +{ + JPEGState* sp = JState(tif); + + assert(sp != NULL); + + switch (tag) { + case TIFFTAG_JPEGTABLES: + *va_arg(ap, uint32*) = sp->jpegtables_length; + *va_arg(ap, void**) = sp->jpegtables; + break; + case TIFFTAG_JPEGQUALITY: + *va_arg(ap, int*) = sp->jpegquality; + break; + case TIFFTAG_JPEGCOLORMODE: + *va_arg(ap, int*) = sp->jpegcolormode; + break; + case TIFFTAG_JPEGTABLESMODE: + *va_arg(ap, int*) = sp->jpegtablesmode; + break; + default: + return (*sp->vgetparent)(tif, tag, ap); + } + return (1); +} + +static void +JPEGPrintDir(TIFF* tif, FILE* fd, long flags) +{ + JPEGState* sp = JState(tif); + + assert(sp != NULL); + (void) flags; + + if( sp != NULL ) { + if (TIFFFieldSet(tif,FIELD_JPEGTABLES)) + fprintf(fd, " JPEG Tables: (%lu bytes)\n", + (unsigned long) sp->jpegtables_length); + if (sp->printdir) + (*sp->printdir)(tif, fd, flags); + } +} + +static uint32 +JPEGDefaultStripSize(TIFF* tif, uint32 s) +{ + JPEGState* sp = JState(tif); + TIFFDirectory *td = &tif->tif_dir; + + s = (*sp->defsparent)(tif, s); + if (s < td->td_imagelength) + s = TIFFroundup_32(s, td->td_ycbcrsubsampling[1] * DCTSIZE); + return (s); +} + +static void +JPEGDefaultTileSize(TIFF* tif, uint32* tw, uint32* th) +{ + JPEGState* sp = JState(tif); + TIFFDirectory *td = &tif->tif_dir; + + (*sp->deftparent)(tif, tw, th); + *tw = TIFFroundup_32(*tw, td->td_ycbcrsubsampling[0] * DCTSIZE); + *th = TIFFroundup_32(*th, td->td_ycbcrsubsampling[1] * DCTSIZE); +} + +/* + * The JPEG library initialized used to be done in TIFFInitJPEG(), but + * now that we allow a TIFF file to be opened in update mode it is necessary + * to have some way of deciding whether compression or decompression is + * desired other than looking at tif->tif_mode. We accomplish this by + * examining {TILE/STRIP}BYTECOUNTS to see if there is a non-zero entry. + * If so, we assume decompression is desired. + * + * This is tricky, because TIFFInitJPEG() is called while the directory is + * being read, and generally speaking the BYTECOUNTS tag won't have been read + * at that point. So we try to defer jpeg library initialization till we + * do have that tag ... basically any access that might require the compressor + * or decompressor that occurs after the reading of the directory. + * + * In an ideal world compressors or decompressors would be setup + * at the point where a single tile or strip was accessed (for read or write) + * so that stuff like update of missing tiles, or replacement of tiles could + * be done. However, we aren't trying to crack that nut just yet ... + * + * NFW, Feb 3rd, 2003. + */ + +static int JPEGInitializeLibJPEG( TIFF * tif, int decompress ) +{ + JPEGState* sp = JState(tif); + + if(sp->cinfo_initialized) + { + if( !decompress && sp->cinfo.comm.is_decompressor ) + TIFFjpeg_destroy( sp ); + else if( decompress && !sp->cinfo.comm.is_decompressor ) + TIFFjpeg_destroy( sp ); + else + return 1; + + sp->cinfo_initialized = 0; + } + + /* + * Initialize libjpeg. + */ + if ( decompress ) { + if (!TIFFjpeg_create_decompress(sp)) + return (0); + } else { + if (!TIFFjpeg_create_compress(sp)) + return (0); + } + + sp->cinfo_initialized = TRUE; + + return 1; +} + +int +TIFFInitJPEG(TIFF* tif, int scheme) +{ + JPEGState* sp; + + assert(scheme == COMPRESSION_JPEG); + + /* + * Merge codec-specific tag information. + */ + if (!_TIFFMergeFields(tif, jpegFields, TIFFArrayCount(jpegFields))) { + TIFFErrorExt(tif->tif_clientdata, + "TIFFInitJPEG", + "Merging JPEG codec-specific tags failed"); + return 0; + } + + /* + * Allocate state block so tag methods have storage to record values. + */ + tif->tif_data = (uint8*) _TIFFmalloc(sizeof (JPEGState)); + + if (tif->tif_data == NULL) { + TIFFErrorExt(tif->tif_clientdata, + "TIFFInitJPEG", "No space for JPEG state block"); + return 0; + } + _TIFFmemset(tif->tif_data, 0, sizeof(JPEGState)); + + sp = JState(tif); + sp->tif = tif; /* back link */ + + /* + * Override parent get/set field methods. + */ + sp->vgetparent = tif->tif_tagmethods.vgetfield; + tif->tif_tagmethods.vgetfield = JPEGVGetField; /* hook for codec tags */ + sp->vsetparent = tif->tif_tagmethods.vsetfield; + tif->tif_tagmethods.vsetfield = JPEGVSetField; /* hook for codec tags */ + sp->printdir = tif->tif_tagmethods.printdir; + tif->tif_tagmethods.printdir = JPEGPrintDir; /* hook for codec tags */ + + /* Default values for codec-specific fields */ + sp->jpegtables = NULL; + sp->jpegtables_length = 0; + sp->jpegquality = 75; /* Default IJG quality */ + sp->jpegcolormode = JPEGCOLORMODE_RAW; + sp->jpegtablesmode = JPEGTABLESMODE_QUANT | JPEGTABLESMODE_HUFF; + sp->ycbcrsampling_fetched = 0; + + /* + * Install codec methods. + */ + tif->tif_fixuptags = JPEGFixupTags; + tif->tif_setupdecode = JPEGSetupDecode; + tif->tif_predecode = JPEGPreDecode; + tif->tif_decoderow = JPEGDecode; + tif->tif_decodestrip = JPEGDecode; + tif->tif_decodetile = JPEGDecode; + tif->tif_setupencode = JPEGSetupEncode; + tif->tif_preencode = JPEGPreEncode; + tif->tif_postencode = JPEGPostEncode; + tif->tif_encoderow = JPEGEncode; + tif->tif_encodestrip = JPEGEncode; + tif->tif_encodetile = JPEGEncode; + tif->tif_cleanup = JPEGCleanup; + sp->defsparent = tif->tif_defstripsize; + tif->tif_defstripsize = JPEGDefaultStripSize; + sp->deftparent = tif->tif_deftilesize; + tif->tif_deftilesize = JPEGDefaultTileSize; + tif->tif_flags |= TIFF_NOBITREV; /* no bit reversal, please */ + + sp->cinfo_initialized = FALSE; + + /* + ** Create a JPEGTables field if no directory has yet been created. + ** We do this just to ensure that sufficient space is reserved for + ** the JPEGTables field. It will be properly created the right + ** size later. + */ + if( tif->tif_diroff == 0 ) + { +#define SIZE_OF_JPEGTABLES 2000 +/* +The following line assumes incorrectly that all JPEG-in-TIFF files will have +a JPEGTABLES tag generated and causes null-filled JPEGTABLES tags to be written +when the JPEG data is placed with TIFFWriteRawStrip. The field bit should be +set, anyway, later when actual JPEGTABLES header is generated, so removing it +here hopefully is harmless. + TIFFSetFieldBit(tif, FIELD_JPEGTABLES); +*/ + sp->jpegtables_length = SIZE_OF_JPEGTABLES; + sp->jpegtables = (void *) _TIFFmalloc(sp->jpegtables_length); + // FIXME: NULL-deref after malloc failure + _TIFFmemset(sp->jpegtables, 0, SIZE_OF_JPEGTABLES); +#undef SIZE_OF_JPEGTABLES + } + + return 1; +} +#endif /* JPEG_SUPPORT */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_jpeg_12.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_jpeg_12.c new file mode 100644 index 000000000..87aaa19e0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_jpeg_12.c @@ -0,0 +1,65 @@ + +#include "tiffiop.h" + +#if defined(JPEG_DUAL_MODE_8_12) + +# define TIFFInitJPEG TIFFInitJPEG_12 + +# include LIBJPEG_12_PATH + +# include "tif_jpeg.c" + +int TIFFReInitJPEG_12( TIFF *tif, int scheme, int is_encode ) + +{ + JPEGState* sp; + + assert(scheme == COMPRESSION_JPEG); + + sp = JState(tif); + sp->tif = tif; /* back link */ + + /* + * Override parent get/set field methods. + */ + tif->tif_tagmethods.vgetfield = JPEGVGetField; /* hook for codec tags */ + tif->tif_tagmethods.vsetfield = JPEGVSetField; /* hook for codec tags */ + tif->tif_tagmethods.printdir = JPEGPrintDir; /* hook for codec tags */ + + /* + * Install codec methods. + */ + tif->tif_fixuptags = JPEGFixupTags; + tif->tif_setupdecode = JPEGSetupDecode; + tif->tif_predecode = JPEGPreDecode; + tif->tif_decoderow = JPEGDecode; + tif->tif_decodestrip = JPEGDecode; + tif->tif_decodetile = JPEGDecode; + tif->tif_setupencode = JPEGSetupEncode; + tif->tif_preencode = JPEGPreEncode; + tif->tif_postencode = JPEGPostEncode; + tif->tif_encoderow = JPEGEncode; + tif->tif_encodestrip = JPEGEncode; + tif->tif_encodetile = JPEGEncode; + tif->tif_cleanup = JPEGCleanup; + tif->tif_defstripsize = JPEGDefaultStripSize; + tif->tif_deftilesize = JPEGDefaultTileSize; + tif->tif_flags |= TIFF_NOBITREV; /* no bit reversal, please */ + + sp->cinfo_initialized = FALSE; + + if( is_encode ) + return JPEGSetupEncode(tif); + else + return JPEGSetupDecode(tif); +} + +#endif /* defined(JPEG_DUAL_MODE_8_12) */ + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_luv.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_luv.c new file mode 100644 index 000000000..eba6c08eb --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_luv.c @@ -0,0 +1,1683 @@ +/* $Id: tif_luv.c,v 1.35 2011-04-02 20:54:09 bfriesen Exp $ */ + +/* + * Copyright (c) 1997 Greg Ward Larson + * Copyright (c) 1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler, Greg Larson and Silicon Graphics may not be used in any + * advertising or publicity relating to the software without the specific, + * prior written permission of Sam Leffler, Greg Larson and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER, GREG LARSON OR SILICON GRAPHICS BE LIABLE + * FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tiffiop.h" +#ifdef LOGLUV_SUPPORT + +/* + * TIFF Library. + * LogLuv compression support for high dynamic range images. + * + * Contributed by Greg Larson. + * + * LogLuv image support uses the TIFF library to store 16 or 10-bit + * log luminance values with 8 bits each of u and v or a 14-bit index. + * + * The codec can take as input and produce as output 32-bit IEEE float values + * as well as 16-bit integer values. A 16-bit luminance is interpreted + * as a sign bit followed by a 15-bit integer that is converted + * to and from a linear magnitude using the transformation: + * + * L = 2^( (Le+.5)/256 - 64 ) # real from 15-bit + * + * Le = floor( 256*(log2(L) + 64) ) # 15-bit from real + * + * The actual conversion to world luminance units in candelas per sq. meter + * requires an additional multiplier, which is stored in the TIFFTAG_STONITS. + * This value is usually set such that a reasonable exposure comes from + * clamping decoded luminances above 1 to 1 in the displayed image. + * + * The 16-bit values for u and v may be converted to real values by dividing + * each by 32768. (This allows for negative values, which aren't useful as + * far as we know, but are left in case of future improvements in human + * color vision.) + * + * Conversion from (u,v), which is actually the CIE (u',v') system for + * you color scientists, is accomplished by the following transformation: + * + * u = 4*x / (-2*x + 12*y + 3) + * v = 9*y / (-2*x + 12*y + 3) + * + * x = 9*u / (6*u - 16*v + 12) + * y = 4*v / (6*u - 16*v + 12) + * + * This process is greatly simplified by passing 32-bit IEEE floats + * for each of three CIE XYZ coordinates. The codec then takes care + * of conversion to and from LogLuv, though the application is still + * responsible for interpreting the TIFFTAG_STONITS calibration factor. + * + * By definition, a CIE XYZ vector of [1 1 1] corresponds to a neutral white + * point of (x,y)=(1/3,1/3). However, most color systems assume some other + * white point, such as D65, and an absolute color conversion to XYZ then + * to another color space with a different white point may introduce an + * unwanted color cast to the image. It is often desirable, therefore, to + * perform a white point conversion that maps the input white to [1 1 1] + * in XYZ, then record the original white point using the TIFFTAG_WHITEPOINT + * tag value. A decoder that demands absolute color calibration may use + * this white point tag to get back the original colors, but usually it + * will be ignored and the new white point will be used instead that + * matches the output color space. + * + * Pixel information is compressed into one of two basic encodings, depending + * on the setting of the compression tag, which is one of COMPRESSION_SGILOG + * or COMPRESSION_SGILOG24. For COMPRESSION_SGILOG, greyscale data is + * stored as: + * + * 1 15 + * |-+---------------| + * + * COMPRESSION_SGILOG color data is stored as: + * + * 1 15 8 8 + * |-+---------------|--------+--------| + * S Le ue ve + * + * For the 24-bit COMPRESSION_SGILOG24 color format, the data is stored as: + * + * 10 14 + * |----------|--------------| + * Le' Ce + * + * There is no sign bit in the 24-bit case, and the (u,v) chromaticity is + * encoded as an index for optimal color resolution. The 10 log bits are + * defined by the following conversions: + * + * L = 2^((Le'+.5)/64 - 12) # real from 10-bit + * + * Le' = floor( 64*(log2(L) + 12) ) # 10-bit from real + * + * The 10 bits of the smaller format may be converted into the 15 bits of + * the larger format by multiplying by 4 and adding 13314. Obviously, + * a smaller range of magnitudes is covered (about 5 orders of magnitude + * instead of 38), and the lack of a sign bit means that negative luminances + * are not allowed. (Well, they aren't allowed in the real world, either, + * but they are useful for certain types of image processing.) + * + * The desired user format is controlled by the setting the internal + * pseudo tag TIFFTAG_SGILOGDATAFMT to one of: + * SGILOGDATAFMT_FLOAT = IEEE 32-bit float XYZ values + * SGILOGDATAFMT_16BIT = 16-bit integer encodings of logL, u and v + * Raw data i/o is also possible using: + * SGILOGDATAFMT_RAW = 32-bit unsigned integer with encoded pixel + * In addition, the following decoding is provided for ease of display: + * SGILOGDATAFMT_8BIT = 8-bit default RGB gamma-corrected values + * + * For grayscale images, we provide the following data formats: + * SGILOGDATAFMT_FLOAT = IEEE 32-bit float Y values + * SGILOGDATAFMT_16BIT = 16-bit integer w/ encoded luminance + * SGILOGDATAFMT_8BIT = 8-bit gray monitor values + * + * Note that the COMPRESSION_SGILOG applies a simple run-length encoding + * scheme by separating the logL, u and v bytes for each row and applying + * a PackBits type of compression. Since the 24-bit encoding is not + * adaptive, the 32-bit color format takes less space in many cases. + * + * Further control is provided over the conversion from higher-resolution + * formats to final encoded values through the pseudo tag + * TIFFTAG_SGILOGENCODE: + * SGILOGENCODE_NODITHER = do not dither encoded values + * SGILOGENCODE_RANDITHER = apply random dithering during encoding + * + * The default value of this tag is SGILOGENCODE_NODITHER for + * COMPRESSION_SGILOG to maximize run-length encoding and + * SGILOGENCODE_RANDITHER for COMPRESSION_SGILOG24 to turn + * quantization errors into noise. + */ + +#include +#include +#include + +/* + * State block for each open TIFF + * file using LogLuv compression/decompression. + */ +typedef struct logLuvState LogLuvState; + +struct logLuvState { + int user_datafmt; /* user data format */ + int encode_meth; /* encoding method */ + int pixel_size; /* bytes per pixel */ + + uint8* tbuf; /* translation buffer */ + tmsize_t tbuflen; /* buffer length */ + void (*tfunc)(LogLuvState*, uint8*, tmsize_t); + + TIFFVSetMethod vgetparent; /* super-class method */ + TIFFVSetMethod vsetparent; /* super-class method */ +}; + +#define DecoderState(tif) ((LogLuvState*) (tif)->tif_data) +#define EncoderState(tif) ((LogLuvState*) (tif)->tif_data) + +#define SGILOGDATAFMT_UNKNOWN -1 + +#define MINRUN 4 /* minimum run length */ + +/* + * Decode a string of 16-bit gray pixels. + */ +static int +LogL16Decode(TIFF* tif, uint8* op, tmsize_t occ, uint16 s) +{ + static const char module[] = "LogL16Decode"; + LogLuvState* sp = DecoderState(tif); + int shft; + tmsize_t i; + tmsize_t npixels; + unsigned char* bp; + int16* tp; + int16 b; + tmsize_t cc; + int rc; + + assert(s == 0); + assert(sp != NULL); + + npixels = occ / sp->pixel_size; + + if (sp->user_datafmt == SGILOGDATAFMT_16BIT) + tp = (int16*) op; + else { + assert(sp->tbuflen >= npixels); + tp = (int16*) sp->tbuf; + } + _TIFFmemset((void*) tp, 0, npixels*sizeof (tp[0])); + + bp = (unsigned char*) tif->tif_rawcp; + cc = tif->tif_rawcc; + /* get each byte string */ + for (shft = 2*8; (shft -= 8) >= 0; ) { + for (i = 0; i < npixels && cc > 0; ) + if (*bp >= 128) { /* run */ + rc = *bp++ + (2-128); /* TODO: potential input buffer overrun when decoding corrupt or truncated data */ + b = (int16)(*bp++ << shft); + cc -= 2; + while (rc-- && i < npixels) + tp[i++] |= b; + } else { /* non-run */ + rc = *bp++; /* nul is noop */ + while (--cc && rc-- && i < npixels) + tp[i++] |= (int16)*bp++ << shft; + } + if (i != npixels) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at row %lu (short %I64d pixels)", + (unsigned long) tif->tif_row, + (unsigned __int64) (npixels - i)); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at row %lu (short %llu pixels)", + (unsigned long) tif->tif_row, + (unsigned long long) (npixels - i)); +#endif + tif->tif_rawcp = (uint8*) bp; + tif->tif_rawcc = cc; + return (0); + } + } + (*sp->tfunc)(sp, op, npixels); + tif->tif_rawcp = (uint8*) bp; + tif->tif_rawcc = cc; + return (1); +} + +/* + * Decode a string of 24-bit pixels. + */ +static int +LogLuvDecode24(TIFF* tif, uint8* op, tmsize_t occ, uint16 s) +{ + static const char module[] = "LogLuvDecode24"; + LogLuvState* sp = DecoderState(tif); + tmsize_t cc; + tmsize_t i; + tmsize_t npixels; + unsigned char* bp; + uint32* tp; + + assert(s == 0); + assert(sp != NULL); + + npixels = occ / sp->pixel_size; + + if (sp->user_datafmt == SGILOGDATAFMT_RAW) + tp = (uint32 *)op; + else { + assert(sp->tbuflen >= npixels); + tp = (uint32 *) sp->tbuf; + } + /* copy to array of uint32 */ + bp = (unsigned char*) tif->tif_rawcp; + cc = tif->tif_rawcc; + for (i = 0; i < npixels && cc > 0; i++) { + tp[i] = bp[0] << 16 | bp[1] << 8 | bp[2]; + bp += 3; + cc -= 3; + } + tif->tif_rawcp = (uint8*) bp; + tif->tif_rawcc = cc; + if (i != npixels) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at row %lu (short %I64d pixels)", + (unsigned long) tif->tif_row, + (unsigned __int64) (npixels - i)); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at row %lu (short %llu pixels)", + (unsigned long) tif->tif_row, + (unsigned long long) (npixels - i)); +#endif + return (0); + } + (*sp->tfunc)(sp, op, npixels); + return (1); +} + +/* + * Decode a string of 32-bit pixels. + */ +static int +LogLuvDecode32(TIFF* tif, uint8* op, tmsize_t occ, uint16 s) +{ + static const char module[] = "LogLuvDecode32"; + LogLuvState* sp; + int shft; + tmsize_t i; + tmsize_t npixels; + unsigned char* bp; + uint32* tp; + uint32 b; + tmsize_t cc; + int rc; + + assert(s == 0); + sp = DecoderState(tif); + assert(sp != NULL); + + npixels = occ / sp->pixel_size; + + if (sp->user_datafmt == SGILOGDATAFMT_RAW) + tp = (uint32*) op; + else { + assert(sp->tbuflen >= npixels); + tp = (uint32*) sp->tbuf; + } + _TIFFmemset((void*) tp, 0, npixels*sizeof (tp[0])); + + bp = (unsigned char*) tif->tif_rawcp; + cc = tif->tif_rawcc; + /* get each byte string */ + for (shft = 4*8; (shft -= 8) >= 0; ) { + for (i = 0; i < npixels && cc > 0; ) + if (*bp >= 128) { /* run */ + rc = *bp++ + (2-128); + b = (uint32)*bp++ << shft; + cc -= 2; /* TODO: potential input buffer overrun when decoding corrupt or truncated data */ + while (rc-- && i < npixels) + tp[i++] |= b; + } else { /* non-run */ + rc = *bp++; /* nul is noop */ + while (--cc && rc-- && i < npixels) + tp[i++] |= (uint32)*bp++ << shft; + } + if (i != npixels) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at row %lu (short %I64d pixels)", + (unsigned long) tif->tif_row, + (unsigned __int64) (npixels - i)); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at row %lu (short %llu pixels)", + (unsigned long) tif->tif_row, + (unsigned long long) (npixels - i)); +#endif + tif->tif_rawcp = (uint8*) bp; + tif->tif_rawcc = cc; + return (0); + } + } + (*sp->tfunc)(sp, op, npixels); + tif->tif_rawcp = (uint8*) bp; + tif->tif_rawcc = cc; + return (1); +} + +/* + * Decode a strip of pixels. We break it into rows to + * maintain synchrony with the encode algorithm, which + * is row by row. + */ +static int +LogLuvDecodeStrip(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + tmsize_t rowlen = TIFFScanlineSize(tif); + + assert(cc%rowlen == 0); + while (cc && (*tif->tif_decoderow)(tif, bp, rowlen, s)) + bp += rowlen, cc -= rowlen; + return (cc == 0); +} + +/* + * Decode a tile of pixels. We break it into rows to + * maintain synchrony with the encode algorithm, which + * is row by row. + */ +static int +LogLuvDecodeTile(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + tmsize_t rowlen = TIFFTileRowSize(tif); + + assert(cc%rowlen == 0); + while (cc && (*tif->tif_decoderow)(tif, bp, rowlen, s)) + bp += rowlen, cc -= rowlen; + return (cc == 0); +} + +/* + * Encode a row of 16-bit pixels. + */ +static int +LogL16Encode(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + LogLuvState* sp = EncoderState(tif); + int shft; + tmsize_t i; + tmsize_t j; + tmsize_t npixels; + uint8* op; + int16* tp; + int16 b; + tmsize_t occ; + int rc=0, mask; + tmsize_t beg; + + assert(s == 0); + assert(sp != NULL); + npixels = cc / sp->pixel_size; + + if (sp->user_datafmt == SGILOGDATAFMT_16BIT) + tp = (int16*) bp; + else { + tp = (int16*) sp->tbuf; + assert(sp->tbuflen >= npixels); + (*sp->tfunc)(sp, bp, npixels); + } + /* compress each byte string */ + op = tif->tif_rawcp; + occ = tif->tif_rawdatasize - tif->tif_rawcc; + for (shft = 2*8; (shft -= 8) >= 0; ) + for (i = 0; i < npixels; i += rc) { + if (occ < 4) { + tif->tif_rawcp = op; + tif->tif_rawcc = tif->tif_rawdatasize - occ; + if (!TIFFFlushData1(tif)) + return (-1); + op = tif->tif_rawcp; + occ = tif->tif_rawdatasize - tif->tif_rawcc; + } + mask = 0xff << shft; /* find next run */ + for (beg = i; beg < npixels; beg += rc) { + b = (int16) (tp[beg] & mask); + rc = 1; + while (rc < 127+2 && beg+rc < npixels && + (tp[beg+rc] & mask) == b) + rc++; + if (rc >= MINRUN) + break; /* long enough */ + } + if (beg-i > 1 && beg-i < MINRUN) { + b = (int16) (tp[i] & mask);/*check short run */ + j = i+1; + while ((tp[j++] & mask) == b) + if (j == beg) { + *op++ = (uint8)(128-2+j-i); + *op++ = (uint8)(b >> shft); + occ -= 2; + i = beg; + break; + } + } + while (i < beg) { /* write out non-run */ + if ((j = beg-i) > 127) j = 127; + if (occ < j+3) { + tif->tif_rawcp = op; + tif->tif_rawcc = tif->tif_rawdatasize - occ; + if (!TIFFFlushData1(tif)) + return (-1); + op = tif->tif_rawcp; + occ = tif->tif_rawdatasize - tif->tif_rawcc; + } + *op++ = (uint8) j; occ--; + while (j--) { + *op++ = (uint8) (tp[i++] >> shft & 0xff); + occ--; + } + } + if (rc >= MINRUN) { /* write out run */ + *op++ = (uint8) (128-2+rc); + *op++ = (uint8) (tp[beg] >> shft & 0xff); + occ -= 2; + } else + rc = 0; + } + tif->tif_rawcp = op; + tif->tif_rawcc = tif->tif_rawdatasize - occ; + + return (1); +} + +/* + * Encode a row of 24-bit pixels. + */ +static int +LogLuvEncode24(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + LogLuvState* sp = EncoderState(tif); + tmsize_t i; + tmsize_t npixels; + tmsize_t occ; + uint8* op; + uint32* tp; + + assert(s == 0); + assert(sp != NULL); + npixels = cc / sp->pixel_size; + + if (sp->user_datafmt == SGILOGDATAFMT_RAW) + tp = (uint32*) bp; + else { + tp = (uint32*) sp->tbuf; + assert(sp->tbuflen >= npixels); + (*sp->tfunc)(sp, bp, npixels); + } + /* write out encoded pixels */ + op = tif->tif_rawcp; + occ = tif->tif_rawdatasize - tif->tif_rawcc; + for (i = npixels; i--; ) { + if (occ < 3) { + tif->tif_rawcp = op; + tif->tif_rawcc = tif->tif_rawdatasize - occ; + if (!TIFFFlushData1(tif)) + return (-1); + op = tif->tif_rawcp; + occ = tif->tif_rawdatasize - tif->tif_rawcc; + } + *op++ = (uint8)(*tp >> 16); + *op++ = (uint8)(*tp >> 8 & 0xff); + *op++ = (uint8)(*tp++ & 0xff); + occ -= 3; + } + tif->tif_rawcp = op; + tif->tif_rawcc = tif->tif_rawdatasize - occ; + + return (1); +} + +/* + * Encode a row of 32-bit pixels. + */ +static int +LogLuvEncode32(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + LogLuvState* sp = EncoderState(tif); + int shft; + tmsize_t i; + tmsize_t j; + tmsize_t npixels; + uint8* op; + uint32* tp; + uint32 b; + tmsize_t occ; + int rc=0, mask; + tmsize_t beg; + + assert(s == 0); + assert(sp != NULL); + + npixels = cc / sp->pixel_size; + + if (sp->user_datafmt == SGILOGDATAFMT_RAW) + tp = (uint32*) bp; + else { + tp = (uint32*) sp->tbuf; + assert(sp->tbuflen >= npixels); + (*sp->tfunc)(sp, bp, npixels); + } + /* compress each byte string */ + op = tif->tif_rawcp; + occ = tif->tif_rawdatasize - tif->tif_rawcc; + for (shft = 4*8; (shft -= 8) >= 0; ) + for (i = 0; i < npixels; i += rc) { + if (occ < 4) { + tif->tif_rawcp = op; + tif->tif_rawcc = tif->tif_rawdatasize - occ; + if (!TIFFFlushData1(tif)) + return (-1); + op = tif->tif_rawcp; + occ = tif->tif_rawdatasize - tif->tif_rawcc; + } + mask = 0xff << shft; /* find next run */ + for (beg = i; beg < npixels; beg += rc) { + b = tp[beg] & mask; + rc = 1; + while (rc < 127+2 && beg+rc < npixels && + (tp[beg+rc] & mask) == b) + rc++; + if (rc >= MINRUN) + break; /* long enough */ + } + if (beg-i > 1 && beg-i < MINRUN) { + b = tp[i] & mask; /* check short run */ + j = i+1; + while ((tp[j++] & mask) == b) + if (j == beg) { + *op++ = (uint8)(128-2+j-i); + *op++ = (uint8)(b >> shft); + occ -= 2; + i = beg; + break; + } + } + while (i < beg) { /* write out non-run */ + if ((j = beg-i) > 127) j = 127; + if (occ < j+3) { + tif->tif_rawcp = op; + tif->tif_rawcc = tif->tif_rawdatasize - occ; + if (!TIFFFlushData1(tif)) + return (-1); + op = tif->tif_rawcp; + occ = tif->tif_rawdatasize - tif->tif_rawcc; + } + *op++ = (uint8) j; occ--; + while (j--) { + *op++ = (uint8)(tp[i++] >> shft & 0xff); + occ--; + } + } + if (rc >= MINRUN) { /* write out run */ + *op++ = (uint8) (128-2+rc); + *op++ = (uint8)(tp[beg] >> shft & 0xff); + occ -= 2; + } else + rc = 0; + } + tif->tif_rawcp = op; + tif->tif_rawcc = tif->tif_rawdatasize - occ; + + return (1); +} + +/* + * Encode a strip of pixels. We break it into rows to + * avoid encoding runs across row boundaries. + */ +static int +LogLuvEncodeStrip(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + tmsize_t rowlen = TIFFScanlineSize(tif); + + assert(cc%rowlen == 0); + while (cc && (*tif->tif_encoderow)(tif, bp, rowlen, s) == 1) + bp += rowlen, cc -= rowlen; + return (cc == 0); +} + +/* + * Encode a tile of pixels. We break it into rows to + * avoid encoding runs across row boundaries. + */ +static int +LogLuvEncodeTile(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + tmsize_t rowlen = TIFFTileRowSize(tif); + + assert(cc%rowlen == 0); + while (cc && (*tif->tif_encoderow)(tif, bp, rowlen, s) == 1) + bp += rowlen, cc -= rowlen; + return (cc == 0); +} + +/* + * Encode/Decode functions for converting to and from user formats. + */ + +#include "uvcode.h" + +#ifndef UVSCALE +#define U_NEU 0.210526316 +#define V_NEU 0.473684211 +#define UVSCALE 410. +#endif + +#ifndef M_LN2 +#define M_LN2 0.69314718055994530942 +#endif +#ifndef M_PI +#define M_PI 3.14159265358979323846 +#endif +#define log2(x) ((1./M_LN2)*log(x)) +#define exp2(x) exp(M_LN2*(x)) + +#define itrunc(x,m) ((m)==SGILOGENCODE_NODITHER ? \ + (int)(x) : \ + (int)((x) + rand()*(1./RAND_MAX) - .5)) + +#if !LOGLUV_PUBLIC +static +#endif +double +LogL16toY(int p16) /* compute luminance from 16-bit LogL */ +{ + int Le = p16 & 0x7fff; + double Y; + + if (!Le) + return (0.); + Y = exp(M_LN2/256.*(Le+.5) - M_LN2*64.); + return (!(p16 & 0x8000) ? Y : -Y); +} + +#if !LOGLUV_PUBLIC +static +#endif +int +LogL16fromY(double Y, int em) /* get 16-bit LogL from Y */ +{ + if (Y >= 1.8371976e19) + return (0x7fff); + if (Y <= -1.8371976e19) + return (0xffff); + if (Y > 5.4136769e-20) + return itrunc(256.*(log2(Y) + 64.), em); + if (Y < -5.4136769e-20) + return (~0x7fff | itrunc(256.*(log2(-Y) + 64.), em)); + return (0); +} + +static void +L16toY(LogLuvState* sp, uint8* op, tmsize_t n) +{ + int16* l16 = (int16*) sp->tbuf; + float* yp = (float*) op; + + while (n-- > 0) + *yp++ = (float)LogL16toY(*l16++); +} + +static void +L16toGry(LogLuvState* sp, uint8* op, tmsize_t n) +{ + int16* l16 = (int16*) sp->tbuf; + uint8* gp = (uint8*) op; + + while (n-- > 0) { + double Y = LogL16toY(*l16++); + *gp++ = (uint8) ((Y <= 0.) ? 0 : (Y >= 1.) ? 255 : (int)(256.*sqrt(Y))); + } +} + +static void +L16fromY(LogLuvState* sp, uint8* op, tmsize_t n) +{ + int16* l16 = (int16*) sp->tbuf; + float* yp = (float*) op; + + while (n-- > 0) + *l16++ = (int16) (LogL16fromY(*yp++, sp->encode_meth)); +} + +#if !LOGLUV_PUBLIC +static +#endif +void +XYZtoRGB24(float xyz[3], uint8 rgb[3]) +{ + double r, g, b; + /* assume CCIR-709 primaries */ + r = 2.690*xyz[0] + -1.276*xyz[1] + -0.414*xyz[2]; + g = -1.022*xyz[0] + 1.978*xyz[1] + 0.044*xyz[2]; + b = 0.061*xyz[0] + -0.224*xyz[1] + 1.163*xyz[2]; + /* assume 2.0 gamma for speed */ + /* could use integer sqrt approx., but this is probably faster */ + rgb[0] = (uint8)((r<=0.) ? 0 : (r >= 1.) ? 255 : (int)(256.*sqrt(r))); + rgb[1] = (uint8)((g<=0.) ? 0 : (g >= 1.) ? 255 : (int)(256.*sqrt(g))); + rgb[2] = (uint8)((b<=0.) ? 0 : (b >= 1.) ? 255 : (int)(256.*sqrt(b))); +} + +#if !LOGLUV_PUBLIC +static +#endif +double +LogL10toY(int p10) /* compute luminance from 10-bit LogL */ +{ + if (p10 == 0) + return (0.); + return (exp(M_LN2/64.*(p10+.5) - M_LN2*12.)); +} + +#if !LOGLUV_PUBLIC +static +#endif +int +LogL10fromY(double Y, int em) /* get 10-bit LogL from Y */ +{ + if (Y >= 15.742) + return (0x3ff); + else if (Y <= .00024283) + return (0); + else + return itrunc(64.*(log2(Y) + 12.), em); +} + +#define NANGLES 100 +#define uv2ang(u, v) ( (NANGLES*.499999999/M_PI) \ + * atan2((v)-V_NEU,(u)-U_NEU) + .5*NANGLES ) + +static int +oog_encode(double u, double v) /* encode out-of-gamut chroma */ +{ + static int oog_table[NANGLES]; + static int initialized = 0; + register int i; + + if (!initialized) { /* set up perimeter table */ + double eps[NANGLES], ua, va, ang, epsa; + int ui, vi, ustep; + for (i = NANGLES; i--; ) + eps[i] = 2.; + for (vi = UV_NVS; vi--; ) { + va = UV_VSTART + (vi+.5)*UV_SQSIZ; + ustep = uv_row[vi].nus-1; + if (vi == UV_NVS-1 || vi == 0 || ustep <= 0) + ustep = 1; + for (ui = uv_row[vi].nus-1; ui >= 0; ui -= ustep) { + ua = uv_row[vi].ustart + (ui+.5)*UV_SQSIZ; + ang = uv2ang(ua, va); + i = (int) ang; + epsa = fabs(ang - (i+.5)); + if (epsa < eps[i]) { + oog_table[i] = uv_row[vi].ncum + ui; + eps[i] = epsa; + } + } + } + for (i = NANGLES; i--; ) /* fill any holes */ + if (eps[i] > 1.5) { + int i1, i2; + for (i1 = 1; i1 < NANGLES/2; i1++) + if (eps[(i+i1)%NANGLES] < 1.5) + break; + for (i2 = 1; i2 < NANGLES/2; i2++) + if (eps[(i+NANGLES-i2)%NANGLES] < 1.5) + break; + if (i1 < i2) + oog_table[i] = + oog_table[(i+i1)%NANGLES]; + else + oog_table[i] = + oog_table[(i+NANGLES-i2)%NANGLES]; + } + initialized = 1; + } + i = (int) uv2ang(u, v); /* look up hue angle */ + return (oog_table[i]); +} + +#undef uv2ang +#undef NANGLES + +#if !LOGLUV_PUBLIC +static +#endif +int +uv_encode(double u, double v, int em) /* encode (u',v') coordinates */ +{ + register int vi, ui; + + if (v < UV_VSTART) + return oog_encode(u, v); + vi = itrunc((v - UV_VSTART)*(1./UV_SQSIZ), em); + if (vi >= UV_NVS) + return oog_encode(u, v); + if (u < uv_row[vi].ustart) + return oog_encode(u, v); + ui = itrunc((u - uv_row[vi].ustart)*(1./UV_SQSIZ), em); + if (ui >= uv_row[vi].nus) + return oog_encode(u, v); + + return (uv_row[vi].ncum + ui); +} + +#if !LOGLUV_PUBLIC +static +#endif +int +uv_decode(double *up, double *vp, int c) /* decode (u',v') index */ +{ + int upper, lower; + register int ui, vi; + + if (c < 0 || c >= UV_NDIVS) + return (-1); + lower = 0; /* binary search */ + upper = UV_NVS; + while (upper - lower > 1) { + vi = (lower + upper) >> 1; + ui = c - uv_row[vi].ncum; + if (ui > 0) + lower = vi; + else if (ui < 0) + upper = vi; + else { + lower = vi; + break; + } + } + vi = lower; + ui = c - uv_row[vi].ncum; + *up = uv_row[vi].ustart + (ui+.5)*UV_SQSIZ; + *vp = UV_VSTART + (vi+.5)*UV_SQSIZ; + return (0); +} + +#if !LOGLUV_PUBLIC +static +#endif +void +LogLuv24toXYZ(uint32 p, float XYZ[3]) +{ + int Ce; + double L, u, v, s, x, y; + /* decode luminance */ + L = LogL10toY(p>>14 & 0x3ff); + if (L <= 0.) { + XYZ[0] = XYZ[1] = XYZ[2] = 0.; + return; + } + /* decode color */ + Ce = p & 0x3fff; + if (uv_decode(&u, &v, Ce) < 0) { + u = U_NEU; v = V_NEU; + } + s = 1./(6.*u - 16.*v + 12.); + x = 9.*u * s; + y = 4.*v * s; + /* convert to XYZ */ + XYZ[0] = (float)(x/y * L); + XYZ[1] = (float)L; + XYZ[2] = (float)((1.-x-y)/y * L); +} + +#if !LOGLUV_PUBLIC +static +#endif +uint32 +LogLuv24fromXYZ(float XYZ[3], int em) +{ + int Le, Ce; + double u, v, s; + /* encode luminance */ + Le = LogL10fromY(XYZ[1], em); + /* encode color */ + s = XYZ[0] + 15.*XYZ[1] + 3.*XYZ[2]; + if (!Le || s <= 0.) { + u = U_NEU; + v = V_NEU; + } else { + u = 4.*XYZ[0] / s; + v = 9.*XYZ[1] / s; + } + Ce = uv_encode(u, v, em); + if (Ce < 0) /* never happens */ + Ce = uv_encode(U_NEU, V_NEU, SGILOGENCODE_NODITHER); + /* combine encodings */ + return (Le << 14 | Ce); +} + +static void +Luv24toXYZ(LogLuvState* sp, uint8* op, tmsize_t n) +{ + uint32* luv = (uint32*) sp->tbuf; + float* xyz = (float*) op; + + while (n-- > 0) { + LogLuv24toXYZ(*luv, xyz); + xyz += 3; + luv++; + } +} + +static void +Luv24toLuv48(LogLuvState* sp, uint8* op, tmsize_t n) +{ + uint32* luv = (uint32*) sp->tbuf; + int16* luv3 = (int16*) op; + + while (n-- > 0) { + double u, v; + + *luv3++ = (int16)((*luv >> 12 & 0xffd) + 13314); + if (uv_decode(&u, &v, *luv&0x3fff) < 0) { + u = U_NEU; + v = V_NEU; + } + *luv3++ = (int16)(u * (1L<<15)); + *luv3++ = (int16)(v * (1L<<15)); + luv++; + } +} + +static void +Luv24toRGB(LogLuvState* sp, uint8* op, tmsize_t n) +{ + uint32* luv = (uint32*) sp->tbuf; + uint8* rgb = (uint8*) op; + + while (n-- > 0) { + float xyz[3]; + + LogLuv24toXYZ(*luv++, xyz); + XYZtoRGB24(xyz, rgb); + rgb += 3; + } +} + +static void +Luv24fromXYZ(LogLuvState* sp, uint8* op, tmsize_t n) +{ + uint32* luv = (uint32*) sp->tbuf; + float* xyz = (float*) op; + + while (n-- > 0) { + *luv++ = LogLuv24fromXYZ(xyz, sp->encode_meth); + xyz += 3; + } +} + +static void +Luv24fromLuv48(LogLuvState* sp, uint8* op, tmsize_t n) +{ + uint32* luv = (uint32*) sp->tbuf; + int16* luv3 = (int16*) op; + + while (n-- > 0) { + int Le, Ce; + + if (luv3[0] <= 0) + Le = 0; + else if (luv3[0] >= (1<<12)+3314) + Le = (1<<10) - 1; + else if (sp->encode_meth == SGILOGENCODE_NODITHER) + Le = (luv3[0]-3314) >> 2; + else + Le = itrunc(.25*(luv3[0]-3314.), sp->encode_meth); + + Ce = uv_encode((luv3[1]+.5)/(1<<15), (luv3[2]+.5)/(1<<15), + sp->encode_meth); + if (Ce < 0) /* never happens */ + Ce = uv_encode(U_NEU, V_NEU, SGILOGENCODE_NODITHER); + *luv++ = (uint32)Le << 14 | Ce; + luv3 += 3; + } +} + +#if !LOGLUV_PUBLIC +static +#endif +void +LogLuv32toXYZ(uint32 p, float XYZ[3]) +{ + double L, u, v, s, x, y; + /* decode luminance */ + L = LogL16toY((int)p >> 16); + if (L <= 0.) { + XYZ[0] = XYZ[1] = XYZ[2] = 0.; + return; + } + /* decode color */ + u = 1./UVSCALE * ((p>>8 & 0xff) + .5); + v = 1./UVSCALE * ((p & 0xff) + .5); + s = 1./(6.*u - 16.*v + 12.); + x = 9.*u * s; + y = 4.*v * s; + /* convert to XYZ */ + XYZ[0] = (float)(x/y * L); + XYZ[1] = (float)L; + XYZ[2] = (float)((1.-x-y)/y * L); +} + +#if !LOGLUV_PUBLIC +static +#endif +uint32 +LogLuv32fromXYZ(float XYZ[3], int em) +{ + unsigned int Le, ue, ve; + double u, v, s; + /* encode luminance */ + Le = (unsigned int)LogL16fromY(XYZ[1], em); + /* encode color */ + s = XYZ[0] + 15.*XYZ[1] + 3.*XYZ[2]; + if (!Le || s <= 0.) { + u = U_NEU; + v = V_NEU; + } else { + u = 4.*XYZ[0] / s; + v = 9.*XYZ[1] / s; + } + if (u <= 0.) ue = 0; + else ue = itrunc(UVSCALE*u, em); + if (ue > 255) ue = 255; + if (v <= 0.) ve = 0; + else ve = itrunc(UVSCALE*v, em); + if (ve > 255) ve = 255; + /* combine encodings */ + return (Le << 16 | ue << 8 | ve); +} + +static void +Luv32toXYZ(LogLuvState* sp, uint8* op, tmsize_t n) +{ + uint32* luv = (uint32*) sp->tbuf; + float* xyz = (float*) op; + + while (n-- > 0) { + LogLuv32toXYZ(*luv++, xyz); + xyz += 3; + } +} + +static void +Luv32toLuv48(LogLuvState* sp, uint8* op, tmsize_t n) +{ + uint32* luv = (uint32*) sp->tbuf; + int16* luv3 = (int16*) op; + + while (n-- > 0) { + double u, v; + + *luv3++ = (int16)(*luv >> 16); + u = 1./UVSCALE * ((*luv>>8 & 0xff) + .5); + v = 1./UVSCALE * ((*luv & 0xff) + .5); + *luv3++ = (int16)(u * (1L<<15)); + *luv3++ = (int16)(v * (1L<<15)); + luv++; + } +} + +static void +Luv32toRGB(LogLuvState* sp, uint8* op, tmsize_t n) +{ + uint32* luv = (uint32*) sp->tbuf; + uint8* rgb = (uint8*) op; + + while (n-- > 0) { + float xyz[3]; + + LogLuv32toXYZ(*luv++, xyz); + XYZtoRGB24(xyz, rgb); + rgb += 3; + } +} + +static void +Luv32fromXYZ(LogLuvState* sp, uint8* op, tmsize_t n) +{ + uint32* luv = (uint32*) sp->tbuf; + float* xyz = (float*) op; + + while (n-- > 0) { + *luv++ = LogLuv32fromXYZ(xyz, sp->encode_meth); + xyz += 3; + } +} + +static void +Luv32fromLuv48(LogLuvState* sp, uint8* op, tmsize_t n) +{ + uint32* luv = (uint32*) sp->tbuf; + int16* luv3 = (int16*) op; + + if (sp->encode_meth == SGILOGENCODE_NODITHER) { + while (n-- > 0) { + *luv++ = (uint32)luv3[0] << 16 | + (luv3[1]*(uint32)(UVSCALE+.5) >> 7 & 0xff00) | + (luv3[2]*(uint32)(UVSCALE+.5) >> 15 & 0xff); + luv3 += 3; + } + return; + } + while (n-- > 0) { + *luv++ = (uint32)luv3[0] << 16 | + (itrunc(luv3[1]*(UVSCALE/(1<<15)), sp->encode_meth) << 8 & 0xff00) | + (itrunc(luv3[2]*(UVSCALE/(1<<15)), sp->encode_meth) & 0xff); + luv3 += 3; + } +} + +static void +_logLuvNop(LogLuvState* sp, uint8* op, tmsize_t n) +{ + (void) sp; (void) op; (void) n; +} + +static int +LogL16GuessDataFmt(TIFFDirectory *td) +{ +#define PACK(s,b,f) (((b)<<6)|((s)<<3)|(f)) + switch (PACK(td->td_samplesperpixel, td->td_bitspersample, td->td_sampleformat)) { + case PACK(1, 32, SAMPLEFORMAT_IEEEFP): + return (SGILOGDATAFMT_FLOAT); + case PACK(1, 16, SAMPLEFORMAT_VOID): + case PACK(1, 16, SAMPLEFORMAT_INT): + case PACK(1, 16, SAMPLEFORMAT_UINT): + return (SGILOGDATAFMT_16BIT); + case PACK(1, 8, SAMPLEFORMAT_VOID): + case PACK(1, 8, SAMPLEFORMAT_UINT): + return (SGILOGDATAFMT_8BIT); + } +#undef PACK + return (SGILOGDATAFMT_UNKNOWN); +} + +static tmsize_t +multiply_ms(tmsize_t m1, tmsize_t m2) +{ + tmsize_t bytes = m1 * m2; + + if (m1 && bytes / m1 != m2) + bytes = 0; + + return bytes; +} + +static int +LogL16InitState(TIFF* tif) +{ + static const char module[] = "LogL16InitState"; + TIFFDirectory *td = &tif->tif_dir; + LogLuvState* sp = DecoderState(tif); + + assert(sp != NULL); + assert(td->td_photometric == PHOTOMETRIC_LOGL); + + /* for some reason, we can't do this in TIFFInitLogL16 */ + if (sp->user_datafmt == SGILOGDATAFMT_UNKNOWN) + sp->user_datafmt = LogL16GuessDataFmt(td); + switch (sp->user_datafmt) { + case SGILOGDATAFMT_FLOAT: + sp->pixel_size = sizeof (float); + break; + case SGILOGDATAFMT_16BIT: + sp->pixel_size = sizeof (int16); + break; + case SGILOGDATAFMT_8BIT: + sp->pixel_size = sizeof (uint8); + break; + default: + TIFFErrorExt(tif->tif_clientdata, module, + "No support for converting user data format to LogL"); + return (0); + } + if( isTiled(tif) ) + sp->tbuflen = multiply_ms(td->td_tilewidth, td->td_tilelength); + else + sp->tbuflen = multiply_ms(td->td_imagewidth, td->td_rowsperstrip); + if (multiply_ms(sp->tbuflen, sizeof (int16)) == 0 || + (sp->tbuf = (uint8*) _TIFFmalloc(sp->tbuflen * sizeof (int16))) == NULL) { + TIFFErrorExt(tif->tif_clientdata, module, "No space for SGILog translation buffer"); + return (0); + } + return (1); +} + +static int +LogLuvGuessDataFmt(TIFFDirectory *td) +{ + int guess; + + /* + * If the user didn't tell us their datafmt, + * take our best guess from the bitspersample. + */ +#define PACK(a,b) (((a)<<3)|(b)) + switch (PACK(td->td_bitspersample, td->td_sampleformat)) { + case PACK(32, SAMPLEFORMAT_IEEEFP): + guess = SGILOGDATAFMT_FLOAT; + break; + case PACK(32, SAMPLEFORMAT_VOID): + case PACK(32, SAMPLEFORMAT_UINT): + case PACK(32, SAMPLEFORMAT_INT): + guess = SGILOGDATAFMT_RAW; + break; + case PACK(16, SAMPLEFORMAT_VOID): + case PACK(16, SAMPLEFORMAT_INT): + case PACK(16, SAMPLEFORMAT_UINT): + guess = SGILOGDATAFMT_16BIT; + break; + case PACK( 8, SAMPLEFORMAT_VOID): + case PACK( 8, SAMPLEFORMAT_UINT): + guess = SGILOGDATAFMT_8BIT; + break; + default: + guess = SGILOGDATAFMT_UNKNOWN; + break; +#undef PACK + } + /* + * Double-check samples per pixel. + */ + switch (td->td_samplesperpixel) { + case 1: + if (guess != SGILOGDATAFMT_RAW) + guess = SGILOGDATAFMT_UNKNOWN; + break; + case 3: + if (guess == SGILOGDATAFMT_RAW) + guess = SGILOGDATAFMT_UNKNOWN; + break; + default: + guess = SGILOGDATAFMT_UNKNOWN; + break; + } + return (guess); +} + +static int +LogLuvInitState(TIFF* tif) +{ + static const char module[] = "LogLuvInitState"; + TIFFDirectory* td = &tif->tif_dir; + LogLuvState* sp = DecoderState(tif); + + assert(sp != NULL); + assert(td->td_photometric == PHOTOMETRIC_LOGLUV); + + /* for some reason, we can't do this in TIFFInitLogLuv */ + if (td->td_planarconfig != PLANARCONFIG_CONTIG) { + TIFFErrorExt(tif->tif_clientdata, module, + "SGILog compression cannot handle non-contiguous data"); + return (0); + } + if (sp->user_datafmt == SGILOGDATAFMT_UNKNOWN) + sp->user_datafmt = LogLuvGuessDataFmt(td); + switch (sp->user_datafmt) { + case SGILOGDATAFMT_FLOAT: + sp->pixel_size = 3*sizeof (float); + break; + case SGILOGDATAFMT_16BIT: + sp->pixel_size = 3*sizeof (int16); + break; + case SGILOGDATAFMT_RAW: + sp->pixel_size = sizeof (uint32); + break; + case SGILOGDATAFMT_8BIT: + sp->pixel_size = 3*sizeof (uint8); + break; + default: + TIFFErrorExt(tif->tif_clientdata, module, + "No support for converting user data format to LogLuv"); + return (0); + } + if( isTiled(tif) ) + sp->tbuflen = multiply_ms(td->td_tilewidth, td->td_tilelength); + else + sp->tbuflen = multiply_ms(td->td_imagewidth, td->td_rowsperstrip); + if (multiply_ms(sp->tbuflen, sizeof (uint32)) == 0 || + (sp->tbuf = (uint8*) _TIFFmalloc(sp->tbuflen * sizeof (uint32))) == NULL) { + TIFFErrorExt(tif->tif_clientdata, module, "No space for SGILog translation buffer"); + return (0); + } + return (1); +} + +static int +LogLuvFixupTags(TIFF* tif) +{ + (void) tif; + return (1); +} + +static int +LogLuvSetupDecode(TIFF* tif) +{ + static const char module[] = "LogLuvSetupDecode"; + LogLuvState* sp = DecoderState(tif); + TIFFDirectory* td = &tif->tif_dir; + + tif->tif_postdecode = _TIFFNoPostDecode; + switch (td->td_photometric) { + case PHOTOMETRIC_LOGLUV: + if (!LogLuvInitState(tif)) + break; + if (td->td_compression == COMPRESSION_SGILOG24) { + tif->tif_decoderow = LogLuvDecode24; + switch (sp->user_datafmt) { + case SGILOGDATAFMT_FLOAT: + sp->tfunc = Luv24toXYZ; + break; + case SGILOGDATAFMT_16BIT: + sp->tfunc = Luv24toLuv48; + break; + case SGILOGDATAFMT_8BIT: + sp->tfunc = Luv24toRGB; + break; + } + } else { + tif->tif_decoderow = LogLuvDecode32; + switch (sp->user_datafmt) { + case SGILOGDATAFMT_FLOAT: + sp->tfunc = Luv32toXYZ; + break; + case SGILOGDATAFMT_16BIT: + sp->tfunc = Luv32toLuv48; + break; + case SGILOGDATAFMT_8BIT: + sp->tfunc = Luv32toRGB; + break; + } + } + return (1); + case PHOTOMETRIC_LOGL: + if (!LogL16InitState(tif)) + break; + tif->tif_decoderow = LogL16Decode; + switch (sp->user_datafmt) { + case SGILOGDATAFMT_FLOAT: + sp->tfunc = L16toY; + break; + case SGILOGDATAFMT_8BIT: + sp->tfunc = L16toGry; + break; + } + return (1); + default: + TIFFErrorExt(tif->tif_clientdata, module, + "Inappropriate photometric interpretation %d for SGILog compression; %s", + td->td_photometric, "must be either LogLUV or LogL"); + break; + } + return (0); +} + +static int +LogLuvSetupEncode(TIFF* tif) +{ + static const char module[] = "LogLuvSetupEncode"; + LogLuvState* sp = EncoderState(tif); + TIFFDirectory* td = &tif->tif_dir; + + switch (td->td_photometric) { + case PHOTOMETRIC_LOGLUV: + if (!LogLuvInitState(tif)) + break; + if (td->td_compression == COMPRESSION_SGILOG24) { + tif->tif_encoderow = LogLuvEncode24; + switch (sp->user_datafmt) { + case SGILOGDATAFMT_FLOAT: + sp->tfunc = Luv24fromXYZ; + break; + case SGILOGDATAFMT_16BIT: + sp->tfunc = Luv24fromLuv48; + break; + case SGILOGDATAFMT_RAW: + break; + default: + goto notsupported; + } + } else { + tif->tif_encoderow = LogLuvEncode32; + switch (sp->user_datafmt) { + case SGILOGDATAFMT_FLOAT: + sp->tfunc = Luv32fromXYZ; + break; + case SGILOGDATAFMT_16BIT: + sp->tfunc = Luv32fromLuv48; + break; + case SGILOGDATAFMT_RAW: + break; + default: + goto notsupported; + } + } + break; + case PHOTOMETRIC_LOGL: + if (!LogL16InitState(tif)) + break; + tif->tif_encoderow = LogL16Encode; + switch (sp->user_datafmt) { + case SGILOGDATAFMT_FLOAT: + sp->tfunc = L16fromY; + break; + case SGILOGDATAFMT_16BIT: + break; + default: + goto notsupported; + } + break; + default: + TIFFErrorExt(tif->tif_clientdata, module, + "Inappropriate photometric interpretation %d for SGILog compression; %s", + td->td_photometric, "must be either LogLUV or LogL"); + break; + } + return (1); +notsupported: + TIFFErrorExt(tif->tif_clientdata, module, + "SGILog compression supported only for %s, or raw data", + td->td_photometric == PHOTOMETRIC_LOGL ? "Y, L" : "XYZ, Luv"); + return (0); +} + +static void +LogLuvClose(TIFF* tif) +{ + TIFFDirectory *td = &tif->tif_dir; + + /* + * For consistency, we always want to write out the same + * bitspersample and sampleformat for our TIFF file, + * regardless of the data format being used by the application. + * Since this routine is called after tags have been set but + * before they have been recorded in the file, we reset them here. + */ + td->td_samplesperpixel = + (td->td_photometric == PHOTOMETRIC_LOGL) ? 1 : 3; + td->td_bitspersample = 16; + td->td_sampleformat = SAMPLEFORMAT_INT; +} + +static void +LogLuvCleanup(TIFF* tif) +{ + LogLuvState* sp = (LogLuvState *)tif->tif_data; + + assert(sp != 0); + + tif->tif_tagmethods.vgetfield = sp->vgetparent; + tif->tif_tagmethods.vsetfield = sp->vsetparent; + + if (sp->tbuf) + _TIFFfree(sp->tbuf); + _TIFFfree(sp); + tif->tif_data = NULL; + + _TIFFSetDefaultCompressionState(tif); +} + +static int +LogLuvVSetField(TIFF* tif, uint32 tag, va_list ap) +{ + static const char module[] = "LogLuvVSetField"; + LogLuvState* sp = DecoderState(tif); + int bps, fmt; + + switch (tag) { + case TIFFTAG_SGILOGDATAFMT: + sp->user_datafmt = (int) va_arg(ap, int); + /* + * Tweak the TIFF header so that the rest of libtiff knows what + * size of data will be passed between app and library, and + * assume that the app knows what it is doing and is not + * confused by these header manipulations... + */ + switch (sp->user_datafmt) { + case SGILOGDATAFMT_FLOAT: + bps = 32, fmt = SAMPLEFORMAT_IEEEFP; + break; + case SGILOGDATAFMT_16BIT: + bps = 16, fmt = SAMPLEFORMAT_INT; + break; + case SGILOGDATAFMT_RAW: + bps = 32, fmt = SAMPLEFORMAT_UINT; + TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, 1); + break; + case SGILOGDATAFMT_8BIT: + bps = 8, fmt = SAMPLEFORMAT_UINT; + break; + default: + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "Unknown data format %d for LogLuv compression", + sp->user_datafmt); + return (0); + } + TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, bps); + TIFFSetField(tif, TIFFTAG_SAMPLEFORMAT, fmt); + /* + * Must recalculate sizes should bits/sample change. + */ + tif->tif_tilesize = isTiled(tif) ? TIFFTileSize(tif) : (tmsize_t) -1; + tif->tif_scanlinesize = TIFFScanlineSize(tif); + return (1); + case TIFFTAG_SGILOGENCODE: + sp->encode_meth = (int) va_arg(ap, int); + if (sp->encode_meth != SGILOGENCODE_NODITHER && + sp->encode_meth != SGILOGENCODE_RANDITHER) { + TIFFErrorExt(tif->tif_clientdata, module, + "Unknown encoding %d for LogLuv compression", + sp->encode_meth); + return (0); + } + return (1); + default: + return (*sp->vsetparent)(tif, tag, ap); + } +} + +static int +LogLuvVGetField(TIFF* tif, uint32 tag, va_list ap) +{ + LogLuvState *sp = (LogLuvState *)tif->tif_data; + + switch (tag) { + case TIFFTAG_SGILOGDATAFMT: + *va_arg(ap, int*) = sp->user_datafmt; + return (1); + default: + return (*sp->vgetparent)(tif, tag, ap); + } +} + +static const TIFFField LogLuvFields[] = { + { TIFFTAG_SGILOGDATAFMT, 0, 0, TIFF_SHORT, 0, TIFF_SETGET_INT, TIFF_SETGET_UNDEFINED, FIELD_PSEUDO, TRUE, FALSE, "SGILogDataFmt", NULL}, + { TIFFTAG_SGILOGENCODE, 0, 0, TIFF_SHORT, 0, TIFF_SETGET_INT, TIFF_SETGET_UNDEFINED, FIELD_PSEUDO, TRUE, FALSE, "SGILogEncode", NULL} +}; + +int +TIFFInitSGILog(TIFF* tif, int scheme) +{ + static const char module[] = "TIFFInitSGILog"; + LogLuvState* sp; + + assert(scheme == COMPRESSION_SGILOG24 || scheme == COMPRESSION_SGILOG); + + /* + * Merge codec-specific tag information. + */ + if (!_TIFFMergeFields(tif, LogLuvFields, + TIFFArrayCount(LogLuvFields))) { + TIFFErrorExt(tif->tif_clientdata, module, + "Merging SGILog codec-specific tags failed"); + return 0; + } + + /* + * Allocate state block so tag methods have storage to record values. + */ + tif->tif_data = (uint8*) _TIFFmalloc(sizeof (LogLuvState)); + if (tif->tif_data == NULL) + goto bad; + sp = (LogLuvState*) tif->tif_data; + _TIFFmemset((void*)sp, 0, sizeof (*sp)); + sp->user_datafmt = SGILOGDATAFMT_UNKNOWN; + sp->encode_meth = (scheme == COMPRESSION_SGILOG24) ? + SGILOGENCODE_RANDITHER : SGILOGENCODE_NODITHER; + sp->tfunc = _logLuvNop; + + /* + * Install codec methods. + * NB: tif_decoderow & tif_encoderow are filled + * in at setup time. + */ + tif->tif_fixuptags = LogLuvFixupTags; + tif->tif_setupdecode = LogLuvSetupDecode; + tif->tif_decodestrip = LogLuvDecodeStrip; + tif->tif_decodetile = LogLuvDecodeTile; + tif->tif_setupencode = LogLuvSetupEncode; + tif->tif_encodestrip = LogLuvEncodeStrip; + tif->tif_encodetile = LogLuvEncodeTile; + tif->tif_close = LogLuvClose; + tif->tif_cleanup = LogLuvCleanup; + + /* + * Override parent get/set field methods. + */ + sp->vgetparent = tif->tif_tagmethods.vgetfield; + tif->tif_tagmethods.vgetfield = LogLuvVGetField; /* hook for codec tags */ + sp->vsetparent = tif->tif_tagmethods.vsetfield; + tif->tif_tagmethods.vsetfield = LogLuvVSetField; /* hook for codec tags */ + + return (1); +bad: + TIFFErrorExt(tif->tif_clientdata, module, + "%s: No space for LogLuv state block", tif->tif_name); + return (0); +} +#endif /* LOGLUV_SUPPORT */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_lzma.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_lzma.c new file mode 100644 index 000000000..dedf1d948 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_lzma.c @@ -0,0 +1,495 @@ +/* $Id: tif_lzma.c,v 1.4 2011-12-22 00:29:29 bfriesen Exp $ */ + +/* + * Copyright (c) 2010, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tiffiop.h" +#ifdef LZMA_SUPPORT +/* + * TIFF Library. + * + * LZMA2 Compression Support + * + * You need an LZMA2 SDK to link with. See http://tukaani.org/xz/ for details. + * + * The codec is derived from ZLIB codec (tif_zip.c). + */ + +#include "tif_predict.h" +#include "lzma.h" + +#include + +/* + * State block for each open TIFF file using LZMA2 compression/decompression. + */ +typedef struct { + TIFFPredictorState predict; + lzma_stream stream; + lzma_filter filters[LZMA_FILTERS_MAX + 1]; + lzma_options_delta opt_delta; /* delta filter options */ + lzma_options_lzma opt_lzma; /* LZMA2 filter options */ + int preset; /* compression level */ + lzma_check check; /* type of the integrity check */ + int state; /* state flags */ +#define LSTATE_INIT_DECODE 0x01 +#define LSTATE_INIT_ENCODE 0x02 + + TIFFVGetMethod vgetparent; /* super-class method */ + TIFFVSetMethod vsetparent; /* super-class method */ +} LZMAState; + +#define LState(tif) ((LZMAState*) (tif)->tif_data) +#define DecoderState(tif) LState(tif) +#define EncoderState(tif) LState(tif) + +static int LZMAEncode(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s); +static int LZMADecode(TIFF* tif, uint8* op, tmsize_t occ, uint16 s); + +static const char * +LZMAStrerror(lzma_ret ret) +{ + switch (ret) { + case LZMA_OK: + return "operation completed successfully"; + case LZMA_STREAM_END: + return "end of stream was reached"; + case LZMA_NO_CHECK: + return "input stream has no integrity check"; + case LZMA_UNSUPPORTED_CHECK: + return "cannot calculate the integrity check"; + case LZMA_GET_CHECK: + return "integrity check type is now available"; + case LZMA_MEM_ERROR: + return "cannot allocate memory"; + case LZMA_MEMLIMIT_ERROR: + return "memory usage limit was reached"; + case LZMA_FORMAT_ERROR: + return "file format not recognized"; + case LZMA_OPTIONS_ERROR: + return "invalid or unsupported options"; + case LZMA_DATA_ERROR: + return "data is corrupt"; + case LZMA_BUF_ERROR: + return "no progress is possible (stream is truncated or corrupt)"; + case LZMA_PROG_ERROR: + return "programming error"; + default: + return "unindentified liblzma error"; + } +} + +static int +LZMAFixupTags(TIFF* tif) +{ + (void) tif; + return 1; +} + +static int +LZMASetupDecode(TIFF* tif) +{ + LZMAState* sp = DecoderState(tif); + + assert(sp != NULL); + + /* if we were last encoding, terminate this mode */ + if (sp->state & LSTATE_INIT_ENCODE) { + lzma_end(&sp->stream); + sp->state = 0; + } + + sp->state |= LSTATE_INIT_DECODE; + return 1; +} + +/* + * Setup state for decoding a strip. + */ +static int +LZMAPreDecode(TIFF* tif, uint16 s) +{ + static const char module[] = "LZMAPreDecode"; + LZMAState* sp = DecoderState(tif); + lzma_ret ret; + + (void) s; + assert(sp != NULL); + + if( (sp->state & LSTATE_INIT_DECODE) == 0 ) + tif->tif_setupdecode(tif); + + sp->stream.next_in = tif->tif_rawdata; + sp->stream.avail_in = (size_t) tif->tif_rawcc; + if ((tmsize_t)sp->stream.avail_in != tif->tif_rawcc) { + TIFFErrorExt(tif->tif_clientdata, module, + "Liblzma cannot deal with buffers this size"); + return 0; + } + + /* + * Disable memory limit when decoding. UINT64_MAX is a flag to disable + * the limit, we are passing (uint64_t)-1 which should be the same. + */ + ret = lzma_stream_decoder(&sp->stream, (uint64_t)-1, 0); + if (ret != LZMA_OK) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error initializing the stream decoder, %s", + LZMAStrerror(ret)); + return 0; + } + return 1; +} + +static int +LZMADecode(TIFF* tif, uint8* op, tmsize_t occ, uint16 s) +{ + static const char module[] = "LZMADecode"; + LZMAState* sp = DecoderState(tif); + + (void) s; + assert(sp != NULL); + assert(sp->state == LSTATE_INIT_DECODE); + + sp->stream.next_in = tif->tif_rawcp; + sp->stream.avail_in = (size_t) tif->tif_rawcc; + + sp->stream.next_out = op; + sp->stream.avail_out = (size_t) occ; + if ((tmsize_t)sp->stream.avail_out != occ) { + TIFFErrorExt(tif->tif_clientdata, module, + "Liblzma cannot deal with buffers this size"); + return 0; + } + + do { + /* + * Save the current stream state to properly recover from the + * decoding errors later. + */ + const uint8_t *next_in = sp->stream.next_in; + size_t avail_in = sp->stream.avail_in; + + lzma_ret ret = lzma_code(&sp->stream, LZMA_RUN); + if (ret == LZMA_STREAM_END) + break; + if (ret == LZMA_MEMLIMIT_ERROR) { + lzma_ret r = lzma_stream_decoder(&sp->stream, + lzma_memusage(&sp->stream), 0); + if (r != LZMA_OK) { + TIFFErrorExt(tif->tif_clientdata, module, + "Error initializing the stream decoder, %s", + LZMAStrerror(r)); + break; + } + sp->stream.next_in = next_in; + sp->stream.avail_in = avail_in; + continue; + } + if (ret != LZMA_OK) { + TIFFErrorExt(tif->tif_clientdata, module, + "Decoding error at scanline %lu, %s", + (unsigned long) tif->tif_row, LZMAStrerror(ret)); + break; + } + } while (sp->stream.avail_out > 0); + if (sp->stream.avail_out != 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at scanline %lu (short %lu bytes)", + (unsigned long) tif->tif_row, (unsigned long) sp->stream.avail_out); + return 0; + } + + tif->tif_rawcp = (uint8 *)sp->stream.next_in; /* cast away const */ + tif->tif_rawcc = sp->stream.avail_in; + + return 1; +} + +static int +LZMASetupEncode(TIFF* tif) +{ + LZMAState* sp = EncoderState(tif); + + assert(sp != NULL); + if (sp->state & LSTATE_INIT_DECODE) { + lzma_end(&sp->stream); + sp->state = 0; + } + + sp->state |= LSTATE_INIT_ENCODE; + return 1; +} + +/* + * Reset encoding state at the start of a strip. + */ +static int +LZMAPreEncode(TIFF* tif, uint16 s) +{ + static const char module[] = "LZMAPreEncode"; + LZMAState *sp = EncoderState(tif); + + (void) s; + assert(sp != NULL); + if( sp->state != LSTATE_INIT_ENCODE ) + tif->tif_setupencode(tif); + + sp->stream.next_out = tif->tif_rawdata; + sp->stream.avail_out = (size_t)tif->tif_rawdatasize; + if ((tmsize_t)sp->stream.avail_out != tif->tif_rawdatasize) { + TIFFErrorExt(tif->tif_clientdata, module, + "Liblzma cannot deal with buffers this size"); + return 0; + } + return (lzma_stream_encoder(&sp->stream, sp->filters, sp->check) == LZMA_OK); +} + +/* + * Encode a chunk of pixels. + */ +static int +LZMAEncode(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + static const char module[] = "LZMAEncode"; + LZMAState *sp = EncoderState(tif); + + assert(sp != NULL); + assert(sp->state == LSTATE_INIT_ENCODE); + + (void) s; + sp->stream.next_in = bp; + sp->stream.avail_in = (size_t) cc; + if ((tmsize_t)sp->stream.avail_in != cc) { + TIFFErrorExt(tif->tif_clientdata, module, + "Liblzma cannot deal with buffers this size"); + return 0; + } + do { + lzma_ret ret = lzma_code(&sp->stream, LZMA_RUN); + if (ret != LZMA_OK) { + TIFFErrorExt(tif->tif_clientdata, module, + "Encoding error at scanline %lu, %s", + (unsigned long) tif->tif_row, LZMAStrerror(ret)); + return 0; + } + if (sp->stream.avail_out == 0) { + tif->tif_rawcc = tif->tif_rawdatasize; + TIFFFlushData1(tif); + sp->stream.next_out = tif->tif_rawdata; + sp->stream.avail_out = (size_t)tif->tif_rawdatasize; /* this is a safe typecast, as check is made already in LZMAPreEncode */ + } + } while (sp->stream.avail_in > 0); + return 1; +} + +/* + * Finish off an encoded strip by flushing the last + * string and tacking on an End Of Information code. + */ +static int +LZMAPostEncode(TIFF* tif) +{ + static const char module[] = "LZMAPostEncode"; + LZMAState *sp = EncoderState(tif); + lzma_ret ret; + + sp->stream.avail_in = 0; + do { + ret = lzma_code(&sp->stream, LZMA_FINISH); + switch (ret) { + case LZMA_STREAM_END: + case LZMA_OK: + if ((tmsize_t)sp->stream.avail_out != tif->tif_rawdatasize) { + tif->tif_rawcc = + tif->tif_rawdatasize - sp->stream.avail_out; + TIFFFlushData1(tif); + sp->stream.next_out = tif->tif_rawdata; + sp->stream.avail_out = (size_t)tif->tif_rawdatasize; /* this is a safe typecast, as check is made already in ZIPPreEncode */ + } + break; + default: + TIFFErrorExt(tif->tif_clientdata, module, "Liblzma error: %s", + LZMAStrerror(ret)); + return 0; + } + } while (ret != LZMA_STREAM_END); + return 1; +} + +static void +LZMACleanup(TIFF* tif) +{ + LZMAState* sp = LState(tif); + + assert(sp != 0); + + (void)TIFFPredictorCleanup(tif); + + tif->tif_tagmethods.vgetfield = sp->vgetparent; + tif->tif_tagmethods.vsetfield = sp->vsetparent; + + if (sp->state) { + lzma_end(&sp->stream); + sp->state = 0; + } + _TIFFfree(sp); + tif->tif_data = NULL; + + _TIFFSetDefaultCompressionState(tif); +} + +static int +LZMAVSetField(TIFF* tif, uint32 tag, va_list ap) +{ + static const char module[] = "LZMAVSetField"; + LZMAState* sp = LState(tif); + + switch (tag) { + case TIFFTAG_LZMAPRESET: + sp->preset = (int) va_arg(ap, int); + lzma_lzma_preset(&sp->opt_lzma, sp->preset); + if (sp->state & LSTATE_INIT_ENCODE) { + lzma_ret ret = lzma_stream_encoder(&sp->stream, + sp->filters, + sp->check); + if (ret != LZMA_OK) { + TIFFErrorExt(tif->tif_clientdata, module, + "Liblzma error: %s", + LZMAStrerror(ret)); + } + } + return 1; + default: + return (*sp->vsetparent)(tif, tag, ap); + } + /*NOTREACHED*/ +} + +static int +LZMAVGetField(TIFF* tif, uint32 tag, va_list ap) +{ + LZMAState* sp = LState(tif); + + switch (tag) { + case TIFFTAG_LZMAPRESET: + *va_arg(ap, int*) = sp->preset; + break; + default: + return (*sp->vgetparent)(tif, tag, ap); + } + return 1; +} + +static const TIFFField lzmaFields[] = { + { TIFFTAG_LZMAPRESET, 0, 0, TIFF_ANY, 0, TIFF_SETGET_INT, TIFF_SETGET_UNDEFINED, + FIELD_PSEUDO, TRUE, FALSE, "LZMA2 Compression Preset", NULL }, +}; + +int +TIFFInitLZMA(TIFF* tif, int scheme) +{ + static const char module[] = "TIFFInitLZMA"; + LZMAState* sp; + lzma_stream tmp_stream = LZMA_STREAM_INIT; + + assert( scheme == COMPRESSION_LZMA ); + + /* + * Merge codec-specific tag information. + */ + if (!_TIFFMergeFields(tif, lzmaFields, TIFFArrayCount(lzmaFields))) { + TIFFErrorExt(tif->tif_clientdata, module, + "Merging LZMA2 codec-specific tags failed"); + return 0; + } + + /* + * Allocate state block so tag methods have storage to record values. + */ + tif->tif_data = (uint8*) _TIFFmalloc(sizeof(LZMAState)); + if (tif->tif_data == NULL) + goto bad; + sp = LState(tif); + memcpy(&sp->stream, &tmp_stream, sizeof(lzma_stream)); + + /* + * Override parent get/set field methods. + */ + sp->vgetparent = tif->tif_tagmethods.vgetfield; + tif->tif_tagmethods.vgetfield = LZMAVGetField; /* hook for codec tags */ + sp->vsetparent = tif->tif_tagmethods.vsetfield; + tif->tif_tagmethods.vsetfield = LZMAVSetField; /* hook for codec tags */ + + /* Default values for codec-specific fields */ + sp->preset = LZMA_PRESET_DEFAULT; /* default comp. level */ + sp->check = LZMA_CHECK_NONE; + sp->state = 0; + + /* Data filters. So far we are using delta and LZMA2 filters only. */ + sp->opt_delta.type = LZMA_DELTA_TYPE_BYTE; + /* + * The sample size in bytes seems to be reasonable distance for delta + * filter. + */ + sp->opt_delta.dist = (tif->tif_dir.td_bitspersample % 8) ? + 1 : tif->tif_dir.td_bitspersample / 8; + sp->filters[0].id = LZMA_FILTER_DELTA; + sp->filters[0].options = &sp->opt_delta; + + lzma_lzma_preset(&sp->opt_lzma, sp->preset); + sp->filters[1].id = LZMA_FILTER_LZMA2; + sp->filters[1].options = &sp->opt_lzma; + + sp->filters[2].id = LZMA_VLI_UNKNOWN; + sp->filters[2].options = NULL; + + /* + * Install codec methods. + */ + tif->tif_fixuptags = LZMAFixupTags; + tif->tif_setupdecode = LZMASetupDecode; + tif->tif_predecode = LZMAPreDecode; + tif->tif_decoderow = LZMADecode; + tif->tif_decodestrip = LZMADecode; + tif->tif_decodetile = LZMADecode; + tif->tif_setupencode = LZMASetupEncode; + tif->tif_preencode = LZMAPreEncode; + tif->tif_postencode = LZMAPostEncode; + tif->tif_encoderow = LZMAEncode; + tif->tif_encodestrip = LZMAEncode; + tif->tif_encodetile = LZMAEncode; + tif->tif_cleanup = LZMACleanup; + /* + * Setup predictor setup. + */ + (void) TIFFPredictorInit(tif); + return 1; +bad: + TIFFErrorExt(tif->tif_clientdata, module, + "No space for LZMA2 state block"); + return 0; +} +#endif /* LZMA_SUPORT */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_lzw.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_lzw.c new file mode 100644 index 000000000..fd9c7a0a7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_lzw.c @@ -0,0 +1,1167 @@ +/* $Id: tif_lzw.c,v 1.45 2011-04-02 20:54:09 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tiffiop.h" +#ifdef LZW_SUPPORT +/* + * TIFF Library. + * Rev 5.0 Lempel-Ziv & Welch Compression Support + * + * This code is derived from the compress program whose code is + * derived from software contributed to Berkeley by James A. Woods, + * derived from original work by Spencer Thomas and Joseph Orost. + * + * The original Berkeley copyright notice appears below in its entirety. + */ +#include "tif_predict.h" + +#include + +/* + * NB: The 5.0 spec describes a different algorithm than Aldus + * implements. Specifically, Aldus does code length transitions + * one code earlier than should be done (for real LZW). + * Earlier versions of this library implemented the correct + * LZW algorithm, but emitted codes in a bit order opposite + * to the TIFF spec. Thus, to maintain compatibility w/ Aldus + * we interpret MSB-LSB ordered codes to be images written w/ + * old versions of this library, but otherwise adhere to the + * Aldus "off by one" algorithm. + * + * Future revisions to the TIFF spec are expected to "clarify this issue". + */ +#define LZW_COMPAT /* include backwards compatibility code */ +/* + * Each strip of data is supposed to be terminated by a CODE_EOI. + * If the following #define is included, the decoder will also + * check for end-of-strip w/o seeing this code. This makes the + * library more robust, but also slower. + */ +#define LZW_CHECKEOS /* include checks for strips w/o EOI code */ + +#define MAXCODE(n) ((1L<<(n))-1) +/* + * The TIFF spec specifies that encoded bit + * strings range from 9 to 12 bits. + */ +#define BITS_MIN 9 /* start with 9 bits */ +#define BITS_MAX 12 /* max of 12 bit strings */ +/* predefined codes */ +#define CODE_CLEAR 256 /* code to clear string table */ +#define CODE_EOI 257 /* end-of-information code */ +#define CODE_FIRST 258 /* first free code entry */ +#define CODE_MAX MAXCODE(BITS_MAX) +#define HSIZE 9001L /* 91% occupancy */ +#define HSHIFT (13-8) +#ifdef LZW_COMPAT +/* NB: +1024 is for compatibility with old files */ +#define CSIZE (MAXCODE(BITS_MAX)+1024L) +#else +#define CSIZE (MAXCODE(BITS_MAX)+1L) +#endif + +/* + * State block for each open TIFF file using LZW + * compression/decompression. Note that the predictor + * state block must be first in this data structure. + */ +typedef struct { + TIFFPredictorState predict; /* predictor super class */ + + unsigned short nbits; /* # of bits/code */ + unsigned short maxcode; /* maximum code for lzw_nbits */ + unsigned short free_ent; /* next free entry in hash table */ + long nextdata; /* next bits of i/o */ + long nextbits; /* # of valid bits in lzw_nextdata */ + + int rw_mode; /* preserve rw_mode from init */ +} LZWBaseState; + +#define lzw_nbits base.nbits +#define lzw_maxcode base.maxcode +#define lzw_free_ent base.free_ent +#define lzw_nextdata base.nextdata +#define lzw_nextbits base.nextbits + +/* + * Encoding-specific state. + */ +typedef uint16 hcode_t; /* codes fit in 16 bits */ +typedef struct { + long hash; + hcode_t code; +} hash_t; + +/* + * Decoding-specific state. + */ +typedef struct code_ent { + struct code_ent *next; + unsigned short length; /* string len, including this token */ + unsigned char value; /* data value */ + unsigned char firstchar; /* first token of string */ +} code_t; + +typedef int (*decodeFunc)(TIFF*, uint8*, tmsize_t, uint16); + +typedef struct { + LZWBaseState base; + + /* Decoding specific data */ + long dec_nbitsmask; /* lzw_nbits 1 bits, right adjusted */ + long dec_restart; /* restart count */ +#ifdef LZW_CHECKEOS + uint64 dec_bitsleft; /* available bits in raw data */ +#endif + decodeFunc dec_decode; /* regular or backwards compatible */ + code_t* dec_codep; /* current recognized code */ + code_t* dec_oldcodep; /* previously recognized code */ + code_t* dec_free_entp; /* next free entry */ + code_t* dec_maxcodep; /* max available entry */ + code_t* dec_codetab; /* kept separate for small machines */ + + /* Encoding specific data */ + int enc_oldcode; /* last code encountered */ + long enc_checkpoint; /* point at which to clear table */ +#define CHECK_GAP 10000 /* enc_ratio check interval */ + long enc_ratio; /* current compression ratio */ + long enc_incount; /* (input) data bytes encoded */ + long enc_outcount; /* encoded (output) bytes */ + uint8* enc_rawlimit; /* bound on tif_rawdata buffer */ + hash_t* enc_hashtab; /* kept separate for small machines */ +} LZWCodecState; + +#define LZWState(tif) ((LZWBaseState*) (tif)->tif_data) +#define DecoderState(tif) ((LZWCodecState*) LZWState(tif)) +#define EncoderState(tif) ((LZWCodecState*) LZWState(tif)) + +static int LZWDecode(TIFF* tif, uint8* op0, tmsize_t occ0, uint16 s); +#ifdef LZW_COMPAT +static int LZWDecodeCompat(TIFF* tif, uint8* op0, tmsize_t occ0, uint16 s); +#endif +static void cl_hash(LZWCodecState*); + +/* + * LZW Decoder. + */ + +#ifdef LZW_CHECKEOS +/* + * This check shouldn't be necessary because each + * strip is suppose to be terminated with CODE_EOI. + */ +#define NextCode(_tif, _sp, _bp, _code, _get) { \ + if ((_sp)->dec_bitsleft < (uint64)nbits) { \ + TIFFWarningExt(_tif->tif_clientdata, module, \ + "LZWDecode: Strip %d not terminated with EOI code", \ + _tif->tif_curstrip); \ + _code = CODE_EOI; \ + } else { \ + _get(_sp,_bp,_code); \ + (_sp)->dec_bitsleft -= nbits; \ + } \ +} +#else +#define NextCode(tif, sp, bp, code, get) get(sp, bp, code) +#endif + +static int +LZWFixupTags(TIFF* tif) +{ + (void) tif; + return (1); +} + +static int +LZWSetupDecode(TIFF* tif) +{ + static const char module[] = "LZWSetupDecode"; + LZWCodecState* sp = DecoderState(tif); + int code; + + if( sp == NULL ) + { + /* + * Allocate state block so tag methods have storage to record + * values. + */ + tif->tif_data = (uint8*) _TIFFmalloc(sizeof(LZWCodecState)); + if (tif->tif_data == NULL) + { + TIFFErrorExt(tif->tif_clientdata, module, "No space for LZW state block"); + return (0); + } + + DecoderState(tif)->dec_codetab = NULL; + DecoderState(tif)->dec_decode = NULL; + + /* + * Setup predictor setup. + */ + (void) TIFFPredictorInit(tif); + + sp = DecoderState(tif); + } + + assert(sp != NULL); + + if (sp->dec_codetab == NULL) { + sp->dec_codetab = (code_t*)_TIFFmalloc(CSIZE*sizeof (code_t)); + if (sp->dec_codetab == NULL) { + TIFFErrorExt(tif->tif_clientdata, module, + "No space for LZW code table"); + return (0); + } + /* + * Pre-load the table. + */ + code = 255; + do { + sp->dec_codetab[code].value = code; + sp->dec_codetab[code].firstchar = code; + sp->dec_codetab[code].length = 1; + sp->dec_codetab[code].next = NULL; + } while (code--); + /* + * Zero-out the unused entries + */ + _TIFFmemset(&sp->dec_codetab[CODE_CLEAR], 0, + (CODE_FIRST - CODE_CLEAR) * sizeof (code_t)); + } + return (1); +} + +/* + * Setup state for decoding a strip. + */ +static int +LZWPreDecode(TIFF* tif, uint16 s) +{ + static const char module[] = "LZWPreDecode"; + LZWCodecState *sp = DecoderState(tif); + + (void) s; + assert(sp != NULL); + if( sp->dec_codetab == NULL ) + { + tif->tif_setupdecode( tif ); + } + + /* + * Check for old bit-reversed codes. + */ + if (tif->tif_rawdata[0] == 0 && (tif->tif_rawdata[1] & 0x1)) { +#ifdef LZW_COMPAT + if (!sp->dec_decode) { + TIFFWarningExt(tif->tif_clientdata, module, + "Old-style LZW codes, convert file"); + /* + * Override default decoding methods with + * ones that deal with the old coding. + * Otherwise the predictor versions set + * above will call the compatibility routines + * through the dec_decode method. + */ + tif->tif_decoderow = LZWDecodeCompat; + tif->tif_decodestrip = LZWDecodeCompat; + tif->tif_decodetile = LZWDecodeCompat; + /* + * If doing horizontal differencing, must + * re-setup the predictor logic since we + * switched the basic decoder methods... + */ + (*tif->tif_setupdecode)(tif); + sp->dec_decode = LZWDecodeCompat; + } + sp->lzw_maxcode = MAXCODE(BITS_MIN); +#else /* !LZW_COMPAT */ + if (!sp->dec_decode) { + TIFFErrorExt(tif->tif_clientdata, module, + "Old-style LZW codes not supported"); + sp->dec_decode = LZWDecode; + } + return (0); +#endif/* !LZW_COMPAT */ + } else { + sp->lzw_maxcode = MAXCODE(BITS_MIN)-1; + sp->dec_decode = LZWDecode; + } + sp->lzw_nbits = BITS_MIN; + sp->lzw_nextbits = 0; + sp->lzw_nextdata = 0; + + sp->dec_restart = 0; + sp->dec_nbitsmask = MAXCODE(BITS_MIN); +#ifdef LZW_CHECKEOS + sp->dec_bitsleft = ((uint64)tif->tif_rawcc) << 3; +#endif + sp->dec_free_entp = sp->dec_codetab + CODE_FIRST; + /* + * Zero entries that are not yet filled in. We do + * this to guard against bogus input data that causes + * us to index into undefined entries. If you can + * come up with a way to safely bounds-check input codes + * while decoding then you can remove this operation. + */ + _TIFFmemset(sp->dec_free_entp, 0, (CSIZE-CODE_FIRST)*sizeof (code_t)); + sp->dec_oldcodep = &sp->dec_codetab[-1]; + sp->dec_maxcodep = &sp->dec_codetab[sp->dec_nbitsmask-1]; + return (1); +} + +/* + * Decode a "hunk of data". + */ +#define GetNextCode(sp, bp, code) { \ + nextdata = (nextdata<<8) | *(bp)++; \ + nextbits += 8; \ + if (nextbits < nbits) { \ + nextdata = (nextdata<<8) | *(bp)++; \ + nextbits += 8; \ + } \ + code = (hcode_t)((nextdata >> (nextbits-nbits)) & nbitsmask); \ + nextbits -= nbits; \ +} + +static void +codeLoop(TIFF* tif, const char* module) +{ + TIFFErrorExt(tif->tif_clientdata, module, + "Bogus encoding, loop in the code table; scanline %d", + tif->tif_row); +} + +static int +LZWDecode(TIFF* tif, uint8* op0, tmsize_t occ0, uint16 s) +{ + static const char module[] = "LZWDecode"; + LZWCodecState *sp = DecoderState(tif); + char *op = (char*) op0; + long occ = (long) occ0; + char *tp; + unsigned char *bp; + hcode_t code; + int len; + long nbits, nextbits, nextdata, nbitsmask; + code_t *codep, *free_entp, *maxcodep, *oldcodep; + + (void) s; + assert(sp != NULL); + assert(sp->dec_codetab != NULL); + + /* + Fail if value does not fit in long. + */ + if ((tmsize_t) occ != occ0) + return (0); + /* + * Restart interrupted output operation. + */ + if (sp->dec_restart) { + long residue; + + codep = sp->dec_codep; + residue = codep->length - sp->dec_restart; + if (residue > occ) { + /* + * Residue from previous decode is sufficient + * to satisfy decode request. Skip to the + * start of the decoded string, place decoded + * values in the output buffer, and return. + */ + sp->dec_restart += occ; + do { + codep = codep->next; + } while (--residue > occ && codep); + if (codep) { + tp = op + occ; + do { + *--tp = codep->value; + codep = codep->next; + } while (--occ && codep); + } + return (1); + } + /* + * Residue satisfies only part of the decode request. + */ + op += residue, occ -= residue; + tp = op; + do { + int t; + --tp; + t = codep->value; + codep = codep->next; + *tp = t; + } while (--residue && codep); + sp->dec_restart = 0; + } + + bp = (unsigned char *)tif->tif_rawcp; + nbits = sp->lzw_nbits; + nextdata = sp->lzw_nextdata; + nextbits = sp->lzw_nextbits; + nbitsmask = sp->dec_nbitsmask; + oldcodep = sp->dec_oldcodep; + free_entp = sp->dec_free_entp; + maxcodep = sp->dec_maxcodep; + + while (occ > 0) { + NextCode(tif, sp, bp, code, GetNextCode); + if (code == CODE_EOI) + break; + if (code == CODE_CLEAR) { + free_entp = sp->dec_codetab + CODE_FIRST; + _TIFFmemset(free_entp, 0, + (CSIZE - CODE_FIRST) * sizeof (code_t)); + nbits = BITS_MIN; + nbitsmask = MAXCODE(BITS_MIN); + maxcodep = sp->dec_codetab + nbitsmask-1; + NextCode(tif, sp, bp, code, GetNextCode); + if (code == CODE_EOI) + break; + if (code >= CODE_CLEAR) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "LZWDecode: Corrupted LZW table at scanline %d", + tif->tif_row); + return (0); + } + *op++ = (char)code, occ--; + oldcodep = sp->dec_codetab + code; + continue; + } + codep = sp->dec_codetab + code; + + /* + * Add the new entry to the code table. + */ + if (free_entp < &sp->dec_codetab[0] || + free_entp >= &sp->dec_codetab[CSIZE]) { + TIFFErrorExt(tif->tif_clientdata, module, + "Corrupted LZW table at scanline %d", + tif->tif_row); + return (0); + } + + free_entp->next = oldcodep; + if (free_entp->next < &sp->dec_codetab[0] || + free_entp->next >= &sp->dec_codetab[CSIZE]) { + TIFFErrorExt(tif->tif_clientdata, module, + "Corrupted LZW table at scanline %d", + tif->tif_row); + return (0); + } + free_entp->firstchar = free_entp->next->firstchar; + free_entp->length = free_entp->next->length+1; + free_entp->value = (codep < free_entp) ? + codep->firstchar : free_entp->firstchar; + if (++free_entp > maxcodep) { + if (++nbits > BITS_MAX) /* should not happen */ + nbits = BITS_MAX; + nbitsmask = MAXCODE(nbits); + maxcodep = sp->dec_codetab + nbitsmask-1; + } + oldcodep = codep; + if (code >= 256) { + /* + * Code maps to a string, copy string + * value to output (written in reverse). + */ + if(codep->length == 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "Wrong length of decoded string: " + "data probably corrupted at scanline %d", + tif->tif_row); + return (0); + } + if (codep->length > occ) { + /* + * String is too long for decode buffer, + * locate portion that will fit, copy to + * the decode buffer, and setup restart + * logic for the next decoding call. + */ + sp->dec_codep = codep; + do { + codep = codep->next; + } while (codep && codep->length > occ); + if (codep) { + sp->dec_restart = (long)occ; + tp = op + occ; + do { + *--tp = codep->value; + codep = codep->next; + } while (--occ && codep); + if (codep) + codeLoop(tif, module); + } + break; + } + len = codep->length; + tp = op + len; + do { + int t; + --tp; + t = codep->value; + codep = codep->next; + *tp = t; + } while (codep && tp > op); + if (codep) { + codeLoop(tif, module); + break; + } + assert(occ >= len); + op += len, occ -= len; + } else + *op++ = (char)code, occ--; + } + + tif->tif_rawcp = (uint8*) bp; + sp->lzw_nbits = (unsigned short) nbits; + sp->lzw_nextdata = nextdata; + sp->lzw_nextbits = nextbits; + sp->dec_nbitsmask = nbitsmask; + sp->dec_oldcodep = oldcodep; + sp->dec_free_entp = free_entp; + sp->dec_maxcodep = maxcodep; + + if (occ > 0) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at scanline %d (short %I64d bytes)", + tif->tif_row, (unsigned __int64) occ); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at scanline %d (short %llu bytes)", + tif->tif_row, (unsigned long long) occ); +#endif + return (0); + } + return (1); +} + +#ifdef LZW_COMPAT +/* + * Decode a "hunk of data" for old images. + */ +#define GetNextCodeCompat(sp, bp, code) { \ + nextdata |= (unsigned long) *(bp)++ << nextbits; \ + nextbits += 8; \ + if (nextbits < nbits) { \ + nextdata |= (unsigned long) *(bp)++ << nextbits;\ + nextbits += 8; \ + } \ + code = (hcode_t)(nextdata & nbitsmask); \ + nextdata >>= nbits; \ + nextbits -= nbits; \ +} + +static int +LZWDecodeCompat(TIFF* tif, uint8* op0, tmsize_t occ0, uint16 s) +{ + static const char module[] = "LZWDecodeCompat"; + LZWCodecState *sp = DecoderState(tif); + char *op = (char*) op0; + long occ = (long) occ0; + char *tp; + unsigned char *bp; + int code, nbits; + long nextbits, nextdata, nbitsmask; + code_t *codep, *free_entp, *maxcodep, *oldcodep; + + (void) s; + assert(sp != NULL); + + /* + Fail if value does not fit in long. + */ + if ((tmsize_t) occ != occ0) + return (0); + + /* + * Restart interrupted output operation. + */ + if (sp->dec_restart) { + long residue; + + codep = sp->dec_codep; + residue = codep->length - sp->dec_restart; + if (residue > occ) { + /* + * Residue from previous decode is sufficient + * to satisfy decode request. Skip to the + * start of the decoded string, place decoded + * values in the output buffer, and return. + */ + sp->dec_restart += occ; + do { + codep = codep->next; + } while (--residue > occ); + tp = op + occ; + do { + *--tp = codep->value; + codep = codep->next; + } while (--occ); + return (1); + } + /* + * Residue satisfies only part of the decode request. + */ + op += residue, occ -= residue; + tp = op; + do { + *--tp = codep->value; + codep = codep->next; + } while (--residue); + sp->dec_restart = 0; + } + + bp = (unsigned char *)tif->tif_rawcp; + nbits = sp->lzw_nbits; + nextdata = sp->lzw_nextdata; + nextbits = sp->lzw_nextbits; + nbitsmask = sp->dec_nbitsmask; + oldcodep = sp->dec_oldcodep; + free_entp = sp->dec_free_entp; + maxcodep = sp->dec_maxcodep; + + while (occ > 0) { + NextCode(tif, sp, bp, code, GetNextCodeCompat); + if (code == CODE_EOI) + break; + if (code == CODE_CLEAR) { + free_entp = sp->dec_codetab + CODE_FIRST; + _TIFFmemset(free_entp, 0, + (CSIZE - CODE_FIRST) * sizeof (code_t)); + nbits = BITS_MIN; + nbitsmask = MAXCODE(BITS_MIN); + maxcodep = sp->dec_codetab + nbitsmask; + NextCode(tif, sp, bp, code, GetNextCodeCompat); + if (code == CODE_EOI) + break; + if (code >= CODE_CLEAR) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "LZWDecode: Corrupted LZW table at scanline %d", + tif->tif_row); + return (0); + } + *op++ = code, occ--; + oldcodep = sp->dec_codetab + code; + continue; + } + codep = sp->dec_codetab + code; + + /* + * Add the new entry to the code table. + */ + if (free_entp < &sp->dec_codetab[0] || + free_entp >= &sp->dec_codetab[CSIZE]) { + TIFFErrorExt(tif->tif_clientdata, module, + "Corrupted LZW table at scanline %d", tif->tif_row); + return (0); + } + + free_entp->next = oldcodep; + if (free_entp->next < &sp->dec_codetab[0] || + free_entp->next >= &sp->dec_codetab[CSIZE]) { + TIFFErrorExt(tif->tif_clientdata, module, + "Corrupted LZW table at scanline %d", tif->tif_row); + return (0); + } + free_entp->firstchar = free_entp->next->firstchar; + free_entp->length = free_entp->next->length+1; + free_entp->value = (codep < free_entp) ? + codep->firstchar : free_entp->firstchar; + if (++free_entp > maxcodep) { + if (++nbits > BITS_MAX) /* should not happen */ + nbits = BITS_MAX; + nbitsmask = MAXCODE(nbits); + maxcodep = sp->dec_codetab + nbitsmask; + } + oldcodep = codep; + if (code >= 256) { + /* + * Code maps to a string, copy string + * value to output (written in reverse). + */ + if(codep->length == 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "Wrong length of decoded " + "string: data probably corrupted at scanline %d", + tif->tif_row); + return (0); + } + if (codep->length > occ) { + /* + * String is too long for decode buffer, + * locate portion that will fit, copy to + * the decode buffer, and setup restart + * logic for the next decoding call. + */ + sp->dec_codep = codep; + do { + codep = codep->next; + } while (codep->length > occ); + sp->dec_restart = occ; + tp = op + occ; + do { + *--tp = codep->value; + codep = codep->next; + } while (--occ); + break; + } + assert(occ >= codep->length); + op += codep->length, occ -= codep->length; + tp = op; + do { + *--tp = codep->value; + } while( (codep = codep->next) != NULL ); + } else + *op++ = code, occ--; + } + + tif->tif_rawcp = (uint8*) bp; + sp->lzw_nbits = nbits; + sp->lzw_nextdata = nextdata; + sp->lzw_nextbits = nextbits; + sp->dec_nbitsmask = nbitsmask; + sp->dec_oldcodep = oldcodep; + sp->dec_free_entp = free_entp; + sp->dec_maxcodep = maxcodep; + + if (occ > 0) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at scanline %d (short %I64d bytes)", + tif->tif_row, (unsigned __int64) occ); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at scanline %d (short %llu bytes)", + tif->tif_row, (unsigned long long) occ); +#endif + return (0); + } + return (1); +} +#endif /* LZW_COMPAT */ + +/* + * LZW Encoding. + */ + +static int +LZWSetupEncode(TIFF* tif) +{ + static const char module[] = "LZWSetupEncode"; + LZWCodecState* sp = EncoderState(tif); + + assert(sp != NULL); + sp->enc_hashtab = (hash_t*) _TIFFmalloc(HSIZE*sizeof (hash_t)); + if (sp->enc_hashtab == NULL) { + TIFFErrorExt(tif->tif_clientdata, module, + "No space for LZW hash table"); + return (0); + } + return (1); +} + +/* + * Reset encoding state at the start of a strip. + */ +static int +LZWPreEncode(TIFF* tif, uint16 s) +{ + LZWCodecState *sp = EncoderState(tif); + + (void) s; + assert(sp != NULL); + + if( sp->enc_hashtab == NULL ) + { + tif->tif_setupencode( tif ); + } + + sp->lzw_nbits = BITS_MIN; + sp->lzw_maxcode = MAXCODE(BITS_MIN); + sp->lzw_free_ent = CODE_FIRST; + sp->lzw_nextbits = 0; + sp->lzw_nextdata = 0; + sp->enc_checkpoint = CHECK_GAP; + sp->enc_ratio = 0; + sp->enc_incount = 0; + sp->enc_outcount = 0; + /* + * The 4 here insures there is space for 2 max-sized + * codes in LZWEncode and LZWPostDecode. + */ + sp->enc_rawlimit = tif->tif_rawdata + tif->tif_rawdatasize-1 - 4; + cl_hash(sp); /* clear hash table */ + sp->enc_oldcode = (hcode_t) -1; /* generates CODE_CLEAR in LZWEncode */ + return (1); +} + +#define CALCRATIO(sp, rat) { \ + if (incount > 0x007fffff) { /* NB: shift will overflow */\ + rat = outcount >> 8; \ + rat = (rat == 0 ? 0x7fffffff : incount/rat); \ + } else \ + rat = (incount<<8) / outcount; \ +} +#define PutNextCode(op, c) { \ + nextdata = (nextdata << nbits) | c; \ + nextbits += nbits; \ + *op++ = (unsigned char)(nextdata >> (nextbits-8)); \ + nextbits -= 8; \ + if (nextbits >= 8) { \ + *op++ = (unsigned char)(nextdata >> (nextbits-8)); \ + nextbits -= 8; \ + } \ + outcount += nbits; \ +} + +/* + * Encode a chunk of pixels. + * + * Uses an open addressing double hashing (no chaining) on the + * prefix code/next character combination. We do a variant of + * Knuth's algorithm D (vol. 3, sec. 6.4) along with G. Knott's + * relatively-prime secondary probe. Here, the modular division + * first probe is gives way to a faster exclusive-or manipulation. + * Also do block compression with an adaptive reset, whereby the + * code table is cleared when the compression ratio decreases, + * but after the table fills. The variable-length output codes + * are re-sized at this point, and a CODE_CLEAR is generated + * for the decoder. + */ +static int +LZWEncode(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + register LZWCodecState *sp = EncoderState(tif); + register long fcode; + register hash_t *hp; + register int h, c; + hcode_t ent; + long disp; + long incount, outcount, checkpoint; + long nextdata, nextbits; + int free_ent, maxcode, nbits; + uint8* op; + uint8* limit; + + (void) s; + if (sp == NULL) + return (0); + + assert(sp->enc_hashtab != NULL); + + /* + * Load local state. + */ + incount = sp->enc_incount; + outcount = sp->enc_outcount; + checkpoint = sp->enc_checkpoint; + nextdata = sp->lzw_nextdata; + nextbits = sp->lzw_nextbits; + free_ent = sp->lzw_free_ent; + maxcode = sp->lzw_maxcode; + nbits = sp->lzw_nbits; + op = tif->tif_rawcp; + limit = sp->enc_rawlimit; + ent = sp->enc_oldcode; + + if (ent == (hcode_t) -1 && cc > 0) { + /* + * NB: This is safe because it can only happen + * at the start of a strip where we know there + * is space in the data buffer. + */ + PutNextCode(op, CODE_CLEAR); + ent = *bp++; cc--; incount++; + } + while (cc > 0) { + c = *bp++; cc--; incount++; + fcode = ((long)c << BITS_MAX) + ent; + h = (c << HSHIFT) ^ ent; /* xor hashing */ +#ifdef _WINDOWS + /* + * Check hash index for an overflow. + */ + if (h >= HSIZE) + h -= HSIZE; +#endif + hp = &sp->enc_hashtab[h]; + if (hp->hash == fcode) { + ent = hp->code; + continue; + } + if (hp->hash >= 0) { + /* + * Primary hash failed, check secondary hash. + */ + disp = HSIZE - h; + if (h == 0) + disp = 1; + do { + /* + * Avoid pointer arithmetic 'cuz of + * wraparound problems with segments. + */ + if ((h -= disp) < 0) + h += HSIZE; + hp = &sp->enc_hashtab[h]; + if (hp->hash == fcode) { + ent = hp->code; + goto hit; + } + } while (hp->hash >= 0); + } + /* + * New entry, emit code and add to table. + */ + /* + * Verify there is space in the buffer for the code + * and any potential Clear code that might be emitted + * below. The value of limit is setup so that there + * are at least 4 bytes free--room for 2 codes. + */ + if (op > limit) { + tif->tif_rawcc = (tmsize_t)(op - tif->tif_rawdata); + TIFFFlushData1(tif); + op = tif->tif_rawdata; + } + PutNextCode(op, ent); + ent = c; + hp->code = free_ent++; + hp->hash = fcode; + if (free_ent == CODE_MAX-1) { + /* table is full, emit clear code and reset */ + cl_hash(sp); + sp->enc_ratio = 0; + incount = 0; + outcount = 0; + free_ent = CODE_FIRST; + PutNextCode(op, CODE_CLEAR); + nbits = BITS_MIN; + maxcode = MAXCODE(BITS_MIN); + } else { + /* + * If the next entry is going to be too big for + * the code size, then increase it, if possible. + */ + if (free_ent > maxcode) { + nbits++; + assert(nbits <= BITS_MAX); + maxcode = (int) MAXCODE(nbits); + } else if (incount >= checkpoint) { + long rat; + /* + * Check compression ratio and, if things seem + * to be slipping, clear the hash table and + * reset state. The compression ratio is a + * 24+8-bit fractional number. + */ + checkpoint = incount+CHECK_GAP; + CALCRATIO(sp, rat); + if (rat <= sp->enc_ratio) { + cl_hash(sp); + sp->enc_ratio = 0; + incount = 0; + outcount = 0; + free_ent = CODE_FIRST; + PutNextCode(op, CODE_CLEAR); + nbits = BITS_MIN; + maxcode = MAXCODE(BITS_MIN); + } else + sp->enc_ratio = rat; + } + } + hit: + ; + } + + /* + * Restore global state. + */ + sp->enc_incount = incount; + sp->enc_outcount = outcount; + sp->enc_checkpoint = checkpoint; + sp->enc_oldcode = ent; + sp->lzw_nextdata = nextdata; + sp->lzw_nextbits = nextbits; + sp->lzw_free_ent = free_ent; + sp->lzw_maxcode = maxcode; + sp->lzw_nbits = nbits; + tif->tif_rawcp = op; + return (1); +} + +/* + * Finish off an encoded strip by flushing the last + * string and tacking on an End Of Information code. + */ +static int +LZWPostEncode(TIFF* tif) +{ + register LZWCodecState *sp = EncoderState(tif); + uint8* op = tif->tif_rawcp; + long nextbits = sp->lzw_nextbits; + long nextdata = sp->lzw_nextdata; + long outcount = sp->enc_outcount; + int nbits = sp->lzw_nbits; + + if (op > sp->enc_rawlimit) { + tif->tif_rawcc = (tmsize_t)(op - tif->tif_rawdata); + TIFFFlushData1(tif); + op = tif->tif_rawdata; + } + if (sp->enc_oldcode != (hcode_t) -1) { + PutNextCode(op, sp->enc_oldcode); + sp->enc_oldcode = (hcode_t) -1; + } + PutNextCode(op, CODE_EOI); + if (nextbits > 0) + *op++ = (unsigned char)(nextdata << (8-nextbits)); + tif->tif_rawcc = (tmsize_t)(op - tif->tif_rawdata); + return (1); +} + +/* + * Reset encoding hash table. + */ +static void +cl_hash(LZWCodecState* sp) +{ + register hash_t *hp = &sp->enc_hashtab[HSIZE-1]; + register long i = HSIZE-8; + + do { + i -= 8; + hp[-7].hash = -1; + hp[-6].hash = -1; + hp[-5].hash = -1; + hp[-4].hash = -1; + hp[-3].hash = -1; + hp[-2].hash = -1; + hp[-1].hash = -1; + hp[ 0].hash = -1; + hp -= 8; + } while (i >= 0); + for (i += 8; i > 0; i--, hp--) + hp->hash = -1; +} + +static void +LZWCleanup(TIFF* tif) +{ + (void)TIFFPredictorCleanup(tif); + + assert(tif->tif_data != 0); + + if (DecoderState(tif)->dec_codetab) + _TIFFfree(DecoderState(tif)->dec_codetab); + + if (EncoderState(tif)->enc_hashtab) + _TIFFfree(EncoderState(tif)->enc_hashtab); + + _TIFFfree(tif->tif_data); + tif->tif_data = NULL; + + _TIFFSetDefaultCompressionState(tif); +} + +int +TIFFInitLZW(TIFF* tif, int scheme) +{ + static const char module[] = "TIFFInitLZW"; + assert(scheme == COMPRESSION_LZW); + /* + * Allocate state block so tag methods have storage to record values. + */ + tif->tif_data = (uint8*) _TIFFmalloc(sizeof (LZWCodecState)); + if (tif->tif_data == NULL) + goto bad; + DecoderState(tif)->dec_codetab = NULL; + DecoderState(tif)->dec_decode = NULL; + EncoderState(tif)->enc_hashtab = NULL; + LZWState(tif)->rw_mode = tif->tif_mode; + + /* + * Install codec methods. + */ + tif->tif_fixuptags = LZWFixupTags; + tif->tif_setupdecode = LZWSetupDecode; + tif->tif_predecode = LZWPreDecode; + tif->tif_decoderow = LZWDecode; + tif->tif_decodestrip = LZWDecode; + tif->tif_decodetile = LZWDecode; + tif->tif_setupencode = LZWSetupEncode; + tif->tif_preencode = LZWPreEncode; + tif->tif_postencode = LZWPostEncode; + tif->tif_encoderow = LZWEncode; + tif->tif_encodestrip = LZWEncode; + tif->tif_encodetile = LZWEncode; + tif->tif_cleanup = LZWCleanup; + /* + * Setup predictor setup. + */ + (void) TIFFPredictorInit(tif); + return (1); +bad: + TIFFErrorExt(tif->tif_clientdata, module, + "No space for LZW state block"); + return (0); +} + +/* + * Copyright (c) 1985, 1986 The Regents of the University of California. + * All rights reserved. + * + * This code is derived from software contributed to Berkeley by + * James A. Woods, derived from original work by Spencer Thomas + * and Joseph Orost. + * + * Redistribution and use in source and binary forms are permitted + * provided that the above copyright notice and this paragraph are + * duplicated in all such forms and that any documentation, + * advertising materials, and other materials related to such + * distribution and use acknowledge that the software was developed + * by the University of California, Berkeley. The name of the + * University may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ +#endif /* LZW_SUPPORT */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_next.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_next.c new file mode 100644 index 000000000..524e127c1 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_next.c @@ -0,0 +1,160 @@ +/* $Id: tif_next.c,v 1.13 2010-03-10 18:56:48 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tiffiop.h" +#ifdef NEXT_SUPPORT +/* + * TIFF Library. + * + * NeXT 2-bit Grey Scale Compression Algorithm Support + */ + +#define SETPIXEL(op, v) { \ + switch (npixels++ & 3) { \ + case 0: op[0] = (unsigned char) ((v) << 6); break; \ + case 1: op[0] |= (v) << 4; break; \ + case 2: op[0] |= (v) << 2; break; \ + case 3: *op++ |= (v); break; \ + } \ +} + +#define LITERALROW 0x00 +#define LITERALSPAN 0x40 +#define WHITE ((1<<2)-1) + +static int +NeXTDecode(TIFF* tif, uint8* buf, tmsize_t occ, uint16 s) +{ + static const char module[] = "NeXTDecode"; + unsigned char *bp, *op; + tmsize_t cc; + uint8* row; + tmsize_t scanline, n; + + (void) s; + /* + * Each scanline is assumed to start off as all + * white (we assume a PhotometricInterpretation + * of ``min-is-black''). + */ + for (op = (unsigned char*) buf, cc = occ; cc-- > 0;) + *op++ = 0xff; + + bp = (unsigned char *)tif->tif_rawcp; + cc = tif->tif_rawcc; + scanline = tif->tif_scanlinesize; + if (occ % scanline) + { + TIFFErrorExt(tif->tif_clientdata, module, "Fractional scanlines cannot be read"); + return (0); + } + for (row = buf; occ > 0; occ -= scanline, row += scanline) { + n = *bp++, cc--; + switch (n) { + case LITERALROW: + /* + * The entire scanline is given as literal values. + */ + if (cc < scanline) + goto bad; + _TIFFmemcpy(row, bp, scanline); + bp += scanline; + cc -= scanline; + break; + case LITERALSPAN: { + tmsize_t off; + /* + * The scanline has a literal span that begins at some + * offset. + */ + off = (bp[0] * 256) + bp[1]; + n = (bp[2] * 256) + bp[3]; + if (cc < 4+n || off+n > scanline) + goto bad; + _TIFFmemcpy(row+off, bp+4, n); + bp += 4+n; + cc -= 4+n; + break; + } + default: { + uint32 npixels = 0, grey; + uint32 imagewidth = tif->tif_dir.td_imagewidth; + + /* + * The scanline is composed of a sequence of constant + * color ``runs''. We shift into ``run mode'' and + * interpret bytes as codes of the form + * until we've filled the scanline. + */ + op = row; + for (;;) { + grey = (uint32)((n>>6) & 0x3); + n &= 0x3f; + /* + * Ensure the run does not exceed the scanline + * bounds, potentially resulting in a security + * issue. + */ + while (n-- > 0 && npixels < imagewidth) + SETPIXEL(op, grey); + if (npixels >= imagewidth) + break; + if (cc == 0) + goto bad; + n = *bp++, cc--; + } + break; + } + } + } + tif->tif_rawcp = (uint8*) bp; + tif->tif_rawcc = cc; + return (1); +bad: + TIFFErrorExt(tif->tif_clientdata, module, "Not enough data for scanline %ld", + (long) tif->tif_row); + return (0); +} + +int +TIFFInitNeXT(TIFF* tif, int scheme) +{ + (void) scheme; + tif->tif_decoderow = NeXTDecode; + tif->tif_decodestrip = NeXTDecode; + tif->tif_decodetile = NeXTDecode; + return (1); +} +#endif /* NEXT_SUPPORT */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_ojpeg.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_ojpeg.c new file mode 100644 index 000000000..6ea3c38ba --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_ojpeg.c @@ -0,0 +1,2496 @@ +/* $Id: tif_ojpeg.c,v 1.56 2012-05-24 03:15:18 fwarmerdam Exp $ */ + +/* WARNING: The type of JPEG encapsulation defined by the TIFF Version 6.0 + specification is now totally obsolete and deprecated for new applications and + images. This file was was created solely in order to read unconverted images + still present on some users' computer systems. It will never be extended + to write such files. Writing new-style JPEG compressed TIFFs is implemented + in tif_jpeg.c. + + The code is carefully crafted to robustly read all gathered JPEG-in-TIFF + testfiles, and anticipate as much as possible all other... But still, it may + fail on some. If you encounter problems, please report them on the TIFF + mailing list and/or to Joris Van Damme . + + Please read the file called "TIFF Technical Note #2" if you need to be + convinced this compression scheme is bad and breaks TIFF. That document + is linked to from the LibTiff site + and from AWare Systems' TIFF section + . It is also absorbed + in Adobe's specification supplements, marked "draft" up to this day, but + supported by the TIFF community. + + This file interfaces with Release 6B of the JPEG Library written by the + Independent JPEG Group. Previous versions of this file required a hack inside + the LibJpeg library. This version no longer requires that. Remember to + remove the hack if you update from the old version. + + Copyright (c) Joris Van Damme + Copyright (c) AWare Systems + + The licence agreement for this file is the same as the rest of the LibTiff + library. + + IN NO EVENT SHALL JORIS VAN DAMME OR AWARE SYSTEMS BE LIABLE FOR + ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + OF THIS SOFTWARE. + + Joris Van Damme and/or AWare Systems may be available for custom + developement. If you like what you see, and need anything similar or related, + contact . +*/ + +/* What is what, and what is not? + + This decoder starts with an input stream, that is essentially the JpegInterchangeFormat + stream, if any, followed by the strile data, if any. This stream is read in + OJPEGReadByte and related functions. + + It analyzes the start of this stream, until it encounters non-marker data, i.e. + compressed image data. Some of the header markers it sees have no actual content, + like the SOI marker, and APP/COM markers that really shouldn't even be there. Some + other markers do have content, and the valuable bits and pieces of information + in these markers are saved, checking all to verify that the stream is more or + less within expected bounds. This happens inside the OJPEGReadHeaderInfoSecStreamXxx + functions. + + Some OJPEG imagery contains no valid JPEG header markers. This situation is picked + up on if we've seen no SOF marker when we're at the start of the compressed image + data. In this case, the tables are read from JpegXxxTables tags, and the other + bits and pieces of information is initialized to its most basic value. This is + implemented in the OJPEGReadHeaderInfoSecTablesXxx functions. + + When this is complete, a good and valid JPEG header can be assembled, and this is + passed through to LibJpeg. When that's done, the remainder of the input stream, i.e. + the compressed image data, can be passed through unchanged. This is done in + OJPEGWriteStream functions. + + LibTiff rightly expects to know the subsampling values before decompression. Just like + in new-style JPEG-in-TIFF, though, or even more so, actually, the YCbCrsubsampling + tag is notoriously unreliable. To correct these tag values with the ones inside + the JPEG stream, the first part of the input stream is pre-scanned in + OJPEGSubsamplingCorrect, making no note of any other data, reporting no warnings + or errors, up to the point where either these values are read, or it's clear they + aren't there. This means that some of the data is read twice, but we feel speed + in correcting these values is important enough to warrant this sacrifice. Allthough + there is currently no define or other configuration mechanism to disable this behaviour, + the actual header scanning is build to robustly respond with error report if it + should encounter an uncorrected mismatch of subsampling values. See + OJPEGReadHeaderInfoSecStreamSof. + + The restart interval and restart markers are the most tricky part... The restart + interval can be specified in a tag. It can also be set inside the input JPEG stream. + It can be used inside the input JPEG stream. If reading from strile data, we've + consistenly discovered the need to insert restart markers in between the different + striles, as is also probably the most likely interpretation of the original TIFF 6.0 + specification. With all this setting of interval, and actual use of markers that is not + predictable at the time of valid JPEG header assembly, the restart thing may turn + out the Achilles heel of this implementation. Fortunately, most OJPEG writer vendors + succeed in reading back what they write, which may be the reason why we've been able + to discover ways that seem to work. + + Some special provision is made for planarconfig separate OJPEG files. These seem + to consistently contain header info, a SOS marker, a plane, SOS marker, plane, SOS, + and plane. This may or may not be a valid JPEG configuration, we don't know and don't + care. We want LibTiff to be able to access the planes individually, without huge + buffering inside LibJpeg, anyway. So we compose headers to feed to LibJpeg, in this + case, that allow us to pass a single plane such that LibJpeg sees a valid + single-channel JPEG stream. Locating subsequent SOS markers, and thus subsequent + planes, is done inside OJPEGReadSecondarySos. + + The benefit of the scheme is... that it works, basically. We know of no other that + does. It works without checking software tag, or otherwise going about things in an + OJPEG flavor specific manner. Instead, it is a single scheme, that covers the cases + with and without JpegInterchangeFormat, with and without striles, with part of + the header in JpegInterchangeFormat and remainder in first strile, etc. It is forgiving + and robust, may likely work with OJPEG flavors we've not seen yet, and makes most out + of the data. + + Another nice side-effect is that a complete JPEG single valid stream is build if + planarconfig is not separate (vast majority). We may one day use that to build + converters to JPEG, and/or to new-style JPEG compression inside TIFF. + + A dissadvantage is the lack of random access to the individual striles. This is the + reason for much of the complicated restart-and-position stuff inside OJPEGPreDecode. + Applications would do well accessing all striles in order, as this will result in + a single sequential scan of the input stream, and no restarting of LibJpeg decoding + session. +*/ + +#define WIN32_LEAN_AND_MEAN +#define VC_EXTRALEAN + +#include "tiffiop.h" +#ifdef OJPEG_SUPPORT + +/* Configuration defines here are: + * JPEG_ENCAP_EXTERNAL: The normal way to call libjpeg, uses longjump. In some environments, + * like eg LibTiffDelphi, this is not possible. For this reason, the actual calls to + * libjpeg, with longjump stuff, are encapsulated in dedicated functions. When + * JPEG_ENCAP_EXTERNAL is defined, these encapsulating functions are declared external + * to this unit, and can be defined elsewhere to use stuff other then longjump. + * The default mode, without JPEG_ENCAP_EXTERNAL, implements the call encapsulators + * here, internally, with normal longjump. + * SETJMP, LONGJMP, JMP_BUF: On some machines/environments a longjump equivalent is + * conviniently available, but still it may be worthwhile to use _setjmp or sigsetjmp + * in place of plain setjmp. These macros will make it easier. It is useless + * to fiddle with these if you define JPEG_ENCAP_EXTERNAL. + * OJPEG_BUFFER: Define the size of the desired buffer here. Should be small enough so as to guarantee + * instant processing, optimal streaming and optimal use of processor cache, but also big + * enough so as to not result in significant call overhead. It should be at least a few + * bytes to accomodate some structures (this is verified in asserts), but it would not be + * sensible to make it this small anyway, and it should be at most 64K since it is indexed + * with uint16. We recommend 2K. + * EGYPTIANWALK: You could also define EGYPTIANWALK here, but it is not used anywhere and has + * absolutely no effect. That is why most people insist the EGYPTIANWALK is a bit silly. + */ + +/* define LIBJPEG_ENCAP_EXTERNAL */ +#define SETJMP(jbuf) setjmp(jbuf) +#define LONGJMP(jbuf,code) longjmp(jbuf,code) +#define JMP_BUF jmp_buf +#define OJPEG_BUFFER 2048 +/* define EGYPTIANWALK */ + +#define JPEG_MARKER_SOF0 0xC0 +#define JPEG_MARKER_SOF1 0xC1 +#define JPEG_MARKER_SOF3 0xC3 +#define JPEG_MARKER_DHT 0xC4 +#define JPEG_MARKER_RST0 0XD0 +#define JPEG_MARKER_SOI 0xD8 +#define JPEG_MARKER_EOI 0xD9 +#define JPEG_MARKER_SOS 0xDA +#define JPEG_MARKER_DQT 0xDB +#define JPEG_MARKER_DRI 0xDD +#define JPEG_MARKER_APP0 0xE0 +#define JPEG_MARKER_COM 0xFE + +#define FIELD_OJPEG_JPEGINTERCHANGEFORMAT (FIELD_CODEC+0) +#define FIELD_OJPEG_JPEGINTERCHANGEFORMATLENGTH (FIELD_CODEC+1) +#define FIELD_OJPEG_JPEGQTABLES (FIELD_CODEC+2) +#define FIELD_OJPEG_JPEGDCTABLES (FIELD_CODEC+3) +#define FIELD_OJPEG_JPEGACTABLES (FIELD_CODEC+4) +#define FIELD_OJPEG_JPEGPROC (FIELD_CODEC+5) +#define FIELD_OJPEG_JPEGRESTARTINTERVAL (FIELD_CODEC+6) + +static const TIFFField ojpegFields[] = { + {TIFFTAG_JPEGIFOFFSET,1,1,TIFF_LONG8,0,TIFF_SETGET_UINT64,TIFF_SETGET_UNDEFINED,FIELD_OJPEG_JPEGINTERCHANGEFORMAT,TRUE,FALSE,"JpegInterchangeFormat",NULL}, + {TIFFTAG_JPEGIFBYTECOUNT,1,1,TIFF_LONG8,0,TIFF_SETGET_UINT64,TIFF_SETGET_UNDEFINED,FIELD_OJPEG_JPEGINTERCHANGEFORMATLENGTH,TRUE,FALSE,"JpegInterchangeFormatLength",NULL}, + {TIFFTAG_JPEGQTABLES,TIFF_VARIABLE2,TIFF_VARIABLE2,TIFF_LONG8,0,TIFF_SETGET_C32_UINT64,TIFF_SETGET_UNDEFINED,FIELD_OJPEG_JPEGQTABLES,FALSE,TRUE,"JpegQTables",NULL}, + {TIFFTAG_JPEGDCTABLES,TIFF_VARIABLE2,TIFF_VARIABLE2,TIFF_LONG8,0,TIFF_SETGET_C32_UINT64,TIFF_SETGET_UNDEFINED,FIELD_OJPEG_JPEGDCTABLES,FALSE,TRUE,"JpegDcTables",NULL}, + {TIFFTAG_JPEGACTABLES,TIFF_VARIABLE2,TIFF_VARIABLE2,TIFF_LONG8,0,TIFF_SETGET_C32_UINT64,TIFF_SETGET_UNDEFINED,FIELD_OJPEG_JPEGACTABLES,FALSE,TRUE,"JpegAcTables",NULL}, + {TIFFTAG_JPEGPROC,1,1,TIFF_SHORT,0,TIFF_SETGET_UINT16,TIFF_SETGET_UNDEFINED,FIELD_OJPEG_JPEGPROC,FALSE,FALSE,"JpegProc",NULL}, + {TIFFTAG_JPEGRESTARTINTERVAL,1,1,TIFF_SHORT,0,TIFF_SETGET_UINT16,TIFF_SETGET_UNDEFINED,FIELD_OJPEG_JPEGRESTARTINTERVAL,FALSE,FALSE,"JpegRestartInterval",NULL}, +}; + +#ifndef LIBJPEG_ENCAP_EXTERNAL +#include +#endif + +/* We undefine FAR to avoid conflict with JPEG definition */ + +#ifdef FAR +#undef FAR +#endif + +/* + Libjpeg's jmorecfg.h defines INT16 and INT32, but only if XMD_H is + not defined. Unfortunately, the MinGW and Borland compilers include + a typedef for INT32, which causes a conflict. MSVC does not include + a conficting typedef given the headers which are included. +*/ +#if defined(__BORLANDC__) || defined(__MINGW32__) +# define XMD_H 1 +#endif + +/* Define "boolean" as unsigned char, not int, per Windows custom. */ +#if defined(__WIN32__) && !defined(__MINGW32__) +# ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ + typedef unsigned char boolean; +# endif +# define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +#endif + +#include "jpeglib.h" +#include "jerror.h" + +typedef struct jpeg_error_mgr jpeg_error_mgr; +typedef struct jpeg_common_struct jpeg_common_struct; +typedef struct jpeg_decompress_struct jpeg_decompress_struct; +typedef struct jpeg_source_mgr jpeg_source_mgr; + +typedef enum { + osibsNotSetYet, + osibsJpegInterchangeFormat, + osibsStrile, + osibsEof +} OJPEGStateInBufferSource; + +typedef enum { + ososSoi, + ososQTable0,ososQTable1,ososQTable2,ososQTable3, + ososDcTable0,ososDcTable1,ososDcTable2,ososDcTable3, + ososAcTable0,ososAcTable1,ososAcTable2,ososAcTable3, + ososDri, + ososSof, + ososSos, + ososCompressed, + ososRst, + ososEoi +} OJPEGStateOutState; + +typedef struct { + TIFF* tif; + #ifndef LIBJPEG_ENCAP_EXTERNAL + JMP_BUF exit_jmpbuf; + #endif + TIFFVGetMethod vgetparent; + TIFFVSetMethod vsetparent; + TIFFPrintMethod printdir; + uint64 file_size; + uint32 image_width; + uint32 image_length; + uint32 strile_width; + uint32 strile_length; + uint32 strile_length_total; + uint8 samples_per_pixel; + uint8 plane_sample_offset; + uint8 samples_per_pixel_per_plane; + uint64 jpeg_interchange_format; + uint64 jpeg_interchange_format_length; + uint8 jpeg_proc; + uint8 subsamplingcorrect; + uint8 subsamplingcorrect_done; + uint8 subsampling_tag; + uint8 subsampling_hor; + uint8 subsampling_ver; + uint8 subsampling_force_desubsampling_inside_decompression; + uint8 qtable_offset_count; + uint8 dctable_offset_count; + uint8 actable_offset_count; + uint64 qtable_offset[3]; + uint64 dctable_offset[3]; + uint64 actable_offset[3]; + uint8* qtable[4]; + uint8* dctable[4]; + uint8* actable[4]; + uint16 restart_interval; + uint8 restart_index; + uint8 sof_log; + uint8 sof_marker_id; + uint32 sof_x; + uint32 sof_y; + uint8 sof_c[3]; + uint8 sof_hv[3]; + uint8 sof_tq[3]; + uint8 sos_cs[3]; + uint8 sos_tda[3]; + struct { + uint8 log; + OJPEGStateInBufferSource in_buffer_source; + uint32 in_buffer_next_strile; + uint64 in_buffer_file_pos; + uint64 in_buffer_file_togo; + } sos_end[3]; + uint8 readheader_done; + uint8 writeheader_done; + uint16 write_cursample; + uint32 write_curstrile; + uint8 libjpeg_session_active; + uint8 libjpeg_jpeg_query_style; + jpeg_error_mgr libjpeg_jpeg_error_mgr; + jpeg_decompress_struct libjpeg_jpeg_decompress_struct; + jpeg_source_mgr libjpeg_jpeg_source_mgr; + uint8 subsampling_convert_log; + uint32 subsampling_convert_ylinelen; + uint32 subsampling_convert_ylines; + uint32 subsampling_convert_clinelen; + uint32 subsampling_convert_clines; + uint32 subsampling_convert_ybuflen; + uint32 subsampling_convert_cbuflen; + uint32 subsampling_convert_ycbcrbuflen; + uint8* subsampling_convert_ycbcrbuf; + uint8* subsampling_convert_ybuf; + uint8* subsampling_convert_cbbuf; + uint8* subsampling_convert_crbuf; + uint32 subsampling_convert_ycbcrimagelen; + uint8** subsampling_convert_ycbcrimage; + uint32 subsampling_convert_clinelenout; + uint32 subsampling_convert_state; + uint32 bytes_per_line; /* if the codec outputs subsampled data, a 'line' in bytes_per_line */ + uint32 lines_per_strile; /* and lines_per_strile means subsampling_ver desubsampled rows */ + OJPEGStateInBufferSource in_buffer_source; + uint32 in_buffer_next_strile; + uint32 in_buffer_strile_count; + uint64 in_buffer_file_pos; + uint8 in_buffer_file_pos_log; + uint64 in_buffer_file_togo; + uint16 in_buffer_togo; + uint8* in_buffer_cur; + uint8 in_buffer[OJPEG_BUFFER]; + OJPEGStateOutState out_state; + uint8 out_buffer[OJPEG_BUFFER]; + uint8* skip_buffer; +} OJPEGState; + +static int OJPEGVGetField(TIFF* tif, uint32 tag, va_list ap); +static int OJPEGVSetField(TIFF* tif, uint32 tag, va_list ap); +static void OJPEGPrintDir(TIFF* tif, FILE* fd, long flags); + +static int OJPEGFixupTags(TIFF* tif); +static int OJPEGSetupDecode(TIFF* tif); +static int OJPEGPreDecode(TIFF* tif, uint16 s); +static int OJPEGPreDecodeSkipRaw(TIFF* tif); +static int OJPEGPreDecodeSkipScanlines(TIFF* tif); +static int OJPEGDecode(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s); +static int OJPEGDecodeRaw(TIFF* tif, uint8* buf, tmsize_t cc); +static int OJPEGDecodeScanlines(TIFF* tif, uint8* buf, tmsize_t cc); +static void OJPEGPostDecode(TIFF* tif, uint8* buf, tmsize_t cc); +static int OJPEGSetupEncode(TIFF* tif); +static int OJPEGPreEncode(TIFF* tif, uint16 s); +static int OJPEGEncode(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s); +static int OJPEGPostEncode(TIFF* tif); +static void OJPEGCleanup(TIFF* tif); + +static void OJPEGSubsamplingCorrect(TIFF* tif); +static int OJPEGReadHeaderInfo(TIFF* tif); +static int OJPEGReadSecondarySos(TIFF* tif, uint16 s); +static int OJPEGWriteHeaderInfo(TIFF* tif); +static void OJPEGLibjpegSessionAbort(TIFF* tif); + +static int OJPEGReadHeaderInfoSec(TIFF* tif); +static int OJPEGReadHeaderInfoSecStreamDri(TIFF* tif); +static int OJPEGReadHeaderInfoSecStreamDqt(TIFF* tif); +static int OJPEGReadHeaderInfoSecStreamDht(TIFF* tif); +static int OJPEGReadHeaderInfoSecStreamSof(TIFF* tif, uint8 marker_id); +static int OJPEGReadHeaderInfoSecStreamSos(TIFF* tif); +static int OJPEGReadHeaderInfoSecTablesQTable(TIFF* tif); +static int OJPEGReadHeaderInfoSecTablesDcTable(TIFF* tif); +static int OJPEGReadHeaderInfoSecTablesAcTable(TIFF* tif); + +static int OJPEGReadBufferFill(OJPEGState* sp); +static int OJPEGReadByte(OJPEGState* sp, uint8* byte); +static int OJPEGReadBytePeek(OJPEGState* sp, uint8* byte); +static void OJPEGReadByteAdvance(OJPEGState* sp); +static int OJPEGReadWord(OJPEGState* sp, uint16* word); +static int OJPEGReadBlock(OJPEGState* sp, uint16 len, void* mem); +static void OJPEGReadSkip(OJPEGState* sp, uint16 len); + +static int OJPEGWriteStream(TIFF* tif, void** mem, uint32* len); +static void OJPEGWriteStreamSoi(TIFF* tif, void** mem, uint32* len); +static void OJPEGWriteStreamQTable(TIFF* tif, uint8 table_index, void** mem, uint32* len); +static void OJPEGWriteStreamDcTable(TIFF* tif, uint8 table_index, void** mem, uint32* len); +static void OJPEGWriteStreamAcTable(TIFF* tif, uint8 table_index, void** mem, uint32* len); +static void OJPEGWriteStreamDri(TIFF* tif, void** mem, uint32* len); +static void OJPEGWriteStreamSof(TIFF* tif, void** mem, uint32* len); +static void OJPEGWriteStreamSos(TIFF* tif, void** mem, uint32* len); +static int OJPEGWriteStreamCompressed(TIFF* tif, void** mem, uint32* len); +static void OJPEGWriteStreamRst(TIFF* tif, void** mem, uint32* len); +static void OJPEGWriteStreamEoi(TIFF* tif, void** mem, uint32* len); + +#ifdef LIBJPEG_ENCAP_EXTERNAL +extern int jpeg_create_decompress_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo); +extern int jpeg_read_header_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo, uint8 require_image); +extern int jpeg_start_decompress_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo); +extern int jpeg_read_scanlines_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo, void* scanlines, uint32 max_lines); +extern int jpeg_read_raw_data_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo, void* data, uint32 max_lines); +extern void jpeg_encap_unwind(TIFF* tif); +#else +static int jpeg_create_decompress_encap(OJPEGState* sp, jpeg_decompress_struct* j); +static int jpeg_read_header_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo, uint8 require_image); +static int jpeg_start_decompress_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo); +static int jpeg_read_scanlines_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo, void* scanlines, uint32 max_lines); +static int jpeg_read_raw_data_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo, void* data, uint32 max_lines); +static void jpeg_encap_unwind(TIFF* tif); +#endif + +static void OJPEGLibjpegJpegErrorMgrOutputMessage(jpeg_common_struct* cinfo); +static void OJPEGLibjpegJpegErrorMgrErrorExit(jpeg_common_struct* cinfo); +static void OJPEGLibjpegJpegSourceMgrInitSource(jpeg_decompress_struct* cinfo); +static boolean OJPEGLibjpegJpegSourceMgrFillInputBuffer(jpeg_decompress_struct* cinfo); +static void OJPEGLibjpegJpegSourceMgrSkipInputData(jpeg_decompress_struct* cinfo, long num_bytes); +static boolean OJPEGLibjpegJpegSourceMgrResyncToRestart(jpeg_decompress_struct* cinfo, int desired); +static void OJPEGLibjpegJpegSourceMgrTermSource(jpeg_decompress_struct* cinfo); + +int +TIFFInitOJPEG(TIFF* tif, int scheme) +{ + static const char module[]="TIFFInitOJPEG"; + OJPEGState* sp; + + assert(scheme==COMPRESSION_OJPEG); + + /* + * Merge codec-specific tag information. + */ + if (!_TIFFMergeFields(tif, ojpegFields, TIFFArrayCount(ojpegFields))) { + TIFFErrorExt(tif->tif_clientdata, module, + "Merging Old JPEG codec-specific tags failed"); + return 0; + } + + /* state block */ + sp=_TIFFmalloc(sizeof(OJPEGState)); + if (sp==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"No space for OJPEG state block"); + return(0); + } + _TIFFmemset(sp,0,sizeof(OJPEGState)); + sp->tif=tif; + sp->jpeg_proc=1; + sp->subsampling_hor=2; + sp->subsampling_ver=2; + TIFFSetField(tif,TIFFTAG_YCBCRSUBSAMPLING,2,2); + /* tif codec methods */ + tif->tif_fixuptags=OJPEGFixupTags; + tif->tif_setupdecode=OJPEGSetupDecode; + tif->tif_predecode=OJPEGPreDecode; + tif->tif_postdecode=OJPEGPostDecode; + tif->tif_decoderow=OJPEGDecode; + tif->tif_decodestrip=OJPEGDecode; + tif->tif_decodetile=OJPEGDecode; + tif->tif_setupencode=OJPEGSetupEncode; + tif->tif_preencode=OJPEGPreEncode; + tif->tif_postencode=OJPEGPostEncode; + tif->tif_encoderow=OJPEGEncode; + tif->tif_encodestrip=OJPEGEncode; + tif->tif_encodetile=OJPEGEncode; + tif->tif_cleanup=OJPEGCleanup; + tif->tif_data=(uint8*)sp; + /* tif tag methods */ + sp->vgetparent=tif->tif_tagmethods.vgetfield; + tif->tif_tagmethods.vgetfield=OJPEGVGetField; + sp->vsetparent=tif->tif_tagmethods.vsetfield; + tif->tif_tagmethods.vsetfield=OJPEGVSetField; + sp->printdir=tif->tif_tagmethods.printdir; + tif->tif_tagmethods.printdir=OJPEGPrintDir; + /* Some OJPEG files don't have strip or tile offsets or bytecounts tags. + Some others do, but have totally meaningless or corrupt values + in these tags. In these cases, the JpegInterchangeFormat stream is + reliable. In any case, this decoder reads the compressed data itself, + from the most reliable locations, and we need to notify encapsulating + LibTiff not to read raw strips or tiles for us. */ + tif->tif_flags|=TIFF_NOREADRAW; + return(1); +} + +static int +OJPEGVGetField(TIFF* tif, uint32 tag, va_list ap) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + switch(tag) + { + case TIFFTAG_JPEGIFOFFSET: + *va_arg(ap,uint64*)=(uint64)sp->jpeg_interchange_format; + break; + case TIFFTAG_JPEGIFBYTECOUNT: + *va_arg(ap,uint64*)=(uint64)sp->jpeg_interchange_format_length; + break; + case TIFFTAG_YCBCRSUBSAMPLING: + if (sp->subsamplingcorrect_done==0) + OJPEGSubsamplingCorrect(tif); + *va_arg(ap,uint16*)=(uint16)sp->subsampling_hor; + *va_arg(ap,uint16*)=(uint16)sp->subsampling_ver; + break; + case TIFFTAG_JPEGQTABLES: + *va_arg(ap,uint32*)=(uint32)sp->qtable_offset_count; + *va_arg(ap,void**)=(void*)sp->qtable_offset; + break; + case TIFFTAG_JPEGDCTABLES: + *va_arg(ap,uint32*)=(uint32)sp->dctable_offset_count; + *va_arg(ap,void**)=(void*)sp->dctable_offset; + break; + case TIFFTAG_JPEGACTABLES: + *va_arg(ap,uint32*)=(uint32)sp->actable_offset_count; + *va_arg(ap,void**)=(void*)sp->actable_offset; + break; + case TIFFTAG_JPEGPROC: + *va_arg(ap,uint16*)=(uint16)sp->jpeg_proc; + break; + case TIFFTAG_JPEGRESTARTINTERVAL: + *va_arg(ap,uint16*)=sp->restart_interval; + break; + default: + return (*sp->vgetparent)(tif,tag,ap); + } + return (1); +} + +static int +OJPEGVSetField(TIFF* tif, uint32 tag, va_list ap) +{ + static const char module[]="OJPEGVSetField"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint32 ma; + uint64* mb; + uint32 n; + switch(tag) + { + case TIFFTAG_JPEGIFOFFSET: + sp->jpeg_interchange_format=(uint64)va_arg(ap,uint64); + break; + case TIFFTAG_JPEGIFBYTECOUNT: + sp->jpeg_interchange_format_length=(uint64)va_arg(ap,uint64); + break; + case TIFFTAG_YCBCRSUBSAMPLING: + sp->subsampling_tag=1; + sp->subsampling_hor=(uint8)va_arg(ap,uint16_vap); + sp->subsampling_ver=(uint8)va_arg(ap,uint16_vap); + tif->tif_dir.td_ycbcrsubsampling[0]=sp->subsampling_hor; + tif->tif_dir.td_ycbcrsubsampling[1]=sp->subsampling_ver; + break; + case TIFFTAG_JPEGQTABLES: + ma=(uint32)va_arg(ap,uint32); + if (ma!=0) + { + if (ma>3) + { + TIFFErrorExt(tif->tif_clientdata,module,"JpegQTables tag has incorrect count"); + return(0); + } + sp->qtable_offset_count=(uint8)ma; + mb=(uint64*)va_arg(ap,uint64*); + for (n=0; nqtable_offset[n]=mb[n]; + } + break; + case TIFFTAG_JPEGDCTABLES: + ma=(uint32)va_arg(ap,uint32); + if (ma!=0) + { + if (ma>3) + { + TIFFErrorExt(tif->tif_clientdata,module,"JpegDcTables tag has incorrect count"); + return(0); + } + sp->dctable_offset_count=(uint8)ma; + mb=(uint64*)va_arg(ap,uint64*); + for (n=0; ndctable_offset[n]=mb[n]; + } + break; + case TIFFTAG_JPEGACTABLES: + ma=(uint32)va_arg(ap,uint32); + if (ma!=0) + { + if (ma>3) + { + TIFFErrorExt(tif->tif_clientdata,module,"JpegAcTables tag has incorrect count"); + return(0); + } + sp->actable_offset_count=(uint8)ma; + mb=(uint64*)va_arg(ap,uint64*); + for (n=0; nactable_offset[n]=mb[n]; + } + break; + case TIFFTAG_JPEGPROC: + sp->jpeg_proc=(uint8)va_arg(ap,uint16_vap); + break; + case TIFFTAG_JPEGRESTARTINTERVAL: + sp->restart_interval=(uint16)va_arg(ap,uint16_vap); + break; + default: + return (*sp->vsetparent)(tif,tag,ap); + } + TIFFSetFieldBit(tif,TIFFFieldWithTag(tif,tag)->field_bit); + tif->tif_flags|=TIFF_DIRTYDIRECT; + return(1); +} + +static void +OJPEGPrintDir(TIFF* tif, FILE* fd, long flags) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8 m; + (void)flags; + assert(sp!=NULL); + if (TIFFFieldSet(tif,FIELD_OJPEG_JPEGINTERCHANGEFORMAT)) + fprintf(fd," JpegInterchangeFormat: " TIFF_UINT64_FORMAT "\n",(TIFF_UINT64_T)sp->jpeg_interchange_format); + if (TIFFFieldSet(tif,FIELD_OJPEG_JPEGINTERCHANGEFORMATLENGTH)) + fprintf(fd," JpegInterchangeFormatLength: " TIFF_UINT64_FORMAT "\n",(TIFF_UINT64_T)sp->jpeg_interchange_format_length); + if (TIFFFieldSet(tif,FIELD_OJPEG_JPEGQTABLES)) + { + fprintf(fd," JpegQTables:"); + for (m=0; mqtable_offset_count; m++) + fprintf(fd," " TIFF_UINT64_FORMAT,(TIFF_UINT64_T)sp->qtable_offset[m]); + fprintf(fd,"\n"); + } + if (TIFFFieldSet(tif,FIELD_OJPEG_JPEGDCTABLES)) + { + fprintf(fd," JpegDcTables:"); + for (m=0; mdctable_offset_count; m++) + fprintf(fd," " TIFF_UINT64_FORMAT,(TIFF_UINT64_T)sp->dctable_offset[m]); + fprintf(fd,"\n"); + } + if (TIFFFieldSet(tif,FIELD_OJPEG_JPEGACTABLES)) + { + fprintf(fd," JpegAcTables:"); + for (m=0; mactable_offset_count; m++) + fprintf(fd," " TIFF_UINT64_FORMAT,(TIFF_UINT64_T)sp->actable_offset[m]); + fprintf(fd,"\n"); + } + if (TIFFFieldSet(tif,FIELD_OJPEG_JPEGPROC)) + fprintf(fd," JpegProc: %u\n",(unsigned int)sp->jpeg_proc); + if (TIFFFieldSet(tif,FIELD_OJPEG_JPEGRESTARTINTERVAL)) + fprintf(fd," JpegRestartInterval: %u\n",(unsigned int)sp->restart_interval); + if (sp->printdir) + (*sp->printdir)(tif, fd, flags); +} + +static int +OJPEGFixupTags(TIFF* tif) +{ + (void) tif; + return(1); +} + +static int +OJPEGSetupDecode(TIFF* tif) +{ + static const char module[]="OJPEGSetupDecode"; + TIFFWarningExt(tif->tif_clientdata,module,"Depreciated and troublesome old-style JPEG compression mode, please convert to new-style JPEG compression and notify vendor of writing software"); + return(1); +} + +static int +OJPEGPreDecode(TIFF* tif, uint16 s) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint32 m; + if (sp->subsamplingcorrect_done==0) + OJPEGSubsamplingCorrect(tif); + if (sp->readheader_done==0) + { + if (OJPEGReadHeaderInfo(tif)==0) + return(0); + } + if (sp->sos_end[s].log==0) + { + if (OJPEGReadSecondarySos(tif,s)==0) + return(0); + } + if isTiled(tif) + m=tif->tif_curtile; + else + m=tif->tif_curstrip; + if ((sp->writeheader_done!=0) && ((sp->write_cursample!=s) || (sp->write_curstrile>m))) + { + if (sp->libjpeg_session_active!=0) + OJPEGLibjpegSessionAbort(tif); + sp->writeheader_done=0; + } + if (sp->writeheader_done==0) + { + sp->plane_sample_offset=(uint8)s; + sp->write_cursample=s; + sp->write_curstrile=s*tif->tif_dir.td_stripsperimage; + if ((sp->in_buffer_file_pos_log==0) || + (sp->in_buffer_file_pos-sp->in_buffer_togo!=sp->sos_end[s].in_buffer_file_pos)) + { + sp->in_buffer_source=sp->sos_end[s].in_buffer_source; + sp->in_buffer_next_strile=sp->sos_end[s].in_buffer_next_strile; + sp->in_buffer_file_pos=sp->sos_end[s].in_buffer_file_pos; + sp->in_buffer_file_pos_log=0; + sp->in_buffer_file_togo=sp->sos_end[s].in_buffer_file_togo; + sp->in_buffer_togo=0; + sp->in_buffer_cur=0; + } + if (OJPEGWriteHeaderInfo(tif)==0) + return(0); + } + while (sp->write_curstrilelibjpeg_jpeg_query_style==0) + { + if (OJPEGPreDecodeSkipRaw(tif)==0) + return(0); + } + else + { + if (OJPEGPreDecodeSkipScanlines(tif)==0) + return(0); + } + sp->write_curstrile++; + } + return(1); +} + +static int +OJPEGPreDecodeSkipRaw(TIFF* tif) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint32 m; + m=sp->lines_per_strile; + if (sp->subsampling_convert_state!=0) + { + if (sp->subsampling_convert_clines-sp->subsampling_convert_state>=m) + { + sp->subsampling_convert_state+=m; + if (sp->subsampling_convert_state==sp->subsampling_convert_clines) + sp->subsampling_convert_state=0; + return(1); + } + m-=sp->subsampling_convert_clines-sp->subsampling_convert_state; + sp->subsampling_convert_state=0; + } + while (m>=sp->subsampling_convert_clines) + { + if (jpeg_read_raw_data_encap(sp,&(sp->libjpeg_jpeg_decompress_struct),sp->subsampling_convert_ycbcrimage,sp->subsampling_ver*8)==0) + return(0); + m-=sp->subsampling_convert_clines; + } + if (m>0) + { + if (jpeg_read_raw_data_encap(sp,&(sp->libjpeg_jpeg_decompress_struct),sp->subsampling_convert_ycbcrimage,sp->subsampling_ver*8)==0) + return(0); + sp->subsampling_convert_state=m; + } + return(1); +} + +static int +OJPEGPreDecodeSkipScanlines(TIFF* tif) +{ + static const char module[]="OJPEGPreDecodeSkipScanlines"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint32 m; + if (sp->skip_buffer==NULL) + { + sp->skip_buffer=_TIFFmalloc(sp->bytes_per_line); + if (sp->skip_buffer==NULL) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + } + for (m=0; mlines_per_strile; m++) + { + if (jpeg_read_scanlines_encap(sp,&(sp->libjpeg_jpeg_decompress_struct),&sp->skip_buffer,1)==0) + return(0); + } + return(1); +} + +static int +OJPEGDecode(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + (void)s; + if (sp->libjpeg_jpeg_query_style==0) + { + if (OJPEGDecodeRaw(tif,buf,cc)==0) + return(0); + } + else + { + if (OJPEGDecodeScanlines(tif,buf,cc)==0) + return(0); + } + return(1); +} + +static int +OJPEGDecodeRaw(TIFF* tif, uint8* buf, tmsize_t cc) +{ + static const char module[]="OJPEGDecodeRaw"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8* m; + tmsize_t n; + uint8* oy; + uint8* ocb; + uint8* ocr; + uint8* p; + uint32 q; + uint8* r; + uint8 sx,sy; + if (cc%sp->bytes_per_line!=0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Fractional scanline not read"); + return(0); + } + assert(cc>0); + m=buf; + n=cc; + do + { + if (sp->subsampling_convert_state==0) + { + if (jpeg_read_raw_data_encap(sp,&(sp->libjpeg_jpeg_decompress_struct),sp->subsampling_convert_ycbcrimage,sp->subsampling_ver*8)==0) + return(0); + } + oy=sp->subsampling_convert_ybuf+sp->subsampling_convert_state*sp->subsampling_ver*sp->subsampling_convert_ylinelen; + ocb=sp->subsampling_convert_cbbuf+sp->subsampling_convert_state*sp->subsampling_convert_clinelen; + ocr=sp->subsampling_convert_crbuf+sp->subsampling_convert_state*sp->subsampling_convert_clinelen; + p=m; + for (q=0; qsubsampling_convert_clinelenout; q++) + { + r=oy; + for (sy=0; sysubsampling_ver; sy++) + { + for (sx=0; sxsubsampling_hor; sx++) + *p++=*r++; + r+=sp->subsampling_convert_ylinelen-sp->subsampling_hor; + } + oy+=sp->subsampling_hor; + *p++=*ocb++; + *p++=*ocr++; + } + sp->subsampling_convert_state++; + if (sp->subsampling_convert_state==sp->subsampling_convert_clines) + sp->subsampling_convert_state=0; + m+=sp->bytes_per_line; + n-=sp->bytes_per_line; + } while(n>0); + return(1); +} + +static int +OJPEGDecodeScanlines(TIFF* tif, uint8* buf, tmsize_t cc) +{ + static const char module[]="OJPEGDecodeScanlines"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8* m; + tmsize_t n; + if (cc%sp->bytes_per_line!=0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Fractional scanline not read"); + return(0); + } + assert(cc>0); + m=buf; + n=cc; + do + { + if (jpeg_read_scanlines_encap(sp,&(sp->libjpeg_jpeg_decompress_struct),&m,1)==0) + return(0); + m+=sp->bytes_per_line; + n-=sp->bytes_per_line; + } while(n>0); + return(1); +} + +static void +OJPEGPostDecode(TIFF* tif, uint8* buf, tmsize_t cc) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + (void)buf; + (void)cc; + sp->write_curstrile++; + if (sp->write_curstrile%tif->tif_dir.td_stripsperimage==0) + { + assert(sp->libjpeg_session_active!=0); + OJPEGLibjpegSessionAbort(tif); + sp->writeheader_done=0; + } +} + +static int +OJPEGSetupEncode(TIFF* tif) +{ + static const char module[]="OJPEGSetupEncode"; + TIFFErrorExt(tif->tif_clientdata,module,"OJPEG encoding not supported; use new-style JPEG compression instead"); + return(0); +} + +static int +OJPEGPreEncode(TIFF* tif, uint16 s) +{ + static const char module[]="OJPEGPreEncode"; + (void)s; + TIFFErrorExt(tif->tif_clientdata,module,"OJPEG encoding not supported; use new-style JPEG compression instead"); + return(0); +} + +static int +OJPEGEncode(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s) +{ + static const char module[]="OJPEGEncode"; + (void)buf; + (void)cc; + (void)s; + TIFFErrorExt(tif->tif_clientdata,module,"OJPEG encoding not supported; use new-style JPEG compression instead"); + return(0); +} + +static int +OJPEGPostEncode(TIFF* tif) +{ + static const char module[]="OJPEGPostEncode"; + TIFFErrorExt(tif->tif_clientdata,module,"OJPEG encoding not supported; use new-style JPEG compression instead"); + return(0); +} + +static void +OJPEGCleanup(TIFF* tif) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + if (sp!=0) + { + tif->tif_tagmethods.vgetfield=sp->vgetparent; + tif->tif_tagmethods.vsetfield=sp->vsetparent; + tif->tif_tagmethods.printdir=sp->printdir; + if (sp->qtable[0]!=0) + _TIFFfree(sp->qtable[0]); + if (sp->qtable[1]!=0) + _TIFFfree(sp->qtable[1]); + if (sp->qtable[2]!=0) + _TIFFfree(sp->qtable[2]); + if (sp->qtable[3]!=0) + _TIFFfree(sp->qtable[3]); + if (sp->dctable[0]!=0) + _TIFFfree(sp->dctable[0]); + if (sp->dctable[1]!=0) + _TIFFfree(sp->dctable[1]); + if (sp->dctable[2]!=0) + _TIFFfree(sp->dctable[2]); + if (sp->dctable[3]!=0) + _TIFFfree(sp->dctable[3]); + if (sp->actable[0]!=0) + _TIFFfree(sp->actable[0]); + if (sp->actable[1]!=0) + _TIFFfree(sp->actable[1]); + if (sp->actable[2]!=0) + _TIFFfree(sp->actable[2]); + if (sp->actable[3]!=0) + _TIFFfree(sp->actable[3]); + if (sp->libjpeg_session_active!=0) + OJPEGLibjpegSessionAbort(tif); + if (sp->subsampling_convert_ycbcrbuf!=0) + _TIFFfree(sp->subsampling_convert_ycbcrbuf); + if (sp->subsampling_convert_ycbcrimage!=0) + _TIFFfree(sp->subsampling_convert_ycbcrimage); + if (sp->skip_buffer!=0) + _TIFFfree(sp->skip_buffer); + _TIFFfree(sp); + tif->tif_data=NULL; + _TIFFSetDefaultCompressionState(tif); + } +} + +static void +OJPEGSubsamplingCorrect(TIFF* tif) +{ + static const char module[]="OJPEGSubsamplingCorrect"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8 mh; + uint8 mv; + _TIFFFillStriles( tif ); + + assert(sp->subsamplingcorrect_done==0); + if ((tif->tif_dir.td_samplesperpixel!=3) || ((tif->tif_dir.td_photometric!=PHOTOMETRIC_YCBCR) && + (tif->tif_dir.td_photometric!=PHOTOMETRIC_ITULAB))) + { + if (sp->subsampling_tag!=0) + TIFFWarningExt(tif->tif_clientdata,module,"Subsampling tag not appropriate for this Photometric and/or SamplesPerPixel"); + sp->subsampling_hor=1; + sp->subsampling_ver=1; + sp->subsampling_force_desubsampling_inside_decompression=0; + } + else + { + sp->subsamplingcorrect_done=1; + mh=sp->subsampling_hor; + mv=sp->subsampling_ver; + sp->subsamplingcorrect=1; + OJPEGReadHeaderInfoSec(tif); + if (sp->subsampling_force_desubsampling_inside_decompression!=0) + { + sp->subsampling_hor=1; + sp->subsampling_ver=1; + } + sp->subsamplingcorrect=0; + if (((sp->subsampling_hor!=mh) || (sp->subsampling_ver!=mv)) && (sp->subsampling_force_desubsampling_inside_decompression==0)) + { + if (sp->subsampling_tag==0) + TIFFWarningExt(tif->tif_clientdata,module,"Subsampling tag is not set, yet subsampling inside JPEG data [%d,%d] does not match default values [2,2]; assuming subsampling inside JPEG data is correct",sp->subsampling_hor,sp->subsampling_ver); + else + TIFFWarningExt(tif->tif_clientdata,module,"Subsampling inside JPEG data [%d,%d] does not match subsampling tag values [%d,%d]; assuming subsampling inside JPEG data is correct",sp->subsampling_hor,sp->subsampling_ver,mh,mv); + } + if (sp->subsampling_force_desubsampling_inside_decompression!=0) + { + if (sp->subsampling_tag==0) + TIFFWarningExt(tif->tif_clientdata,module,"Subsampling tag is not set, yet subsampling inside JPEG data does not match default values [2,2] (nor any other values allowed in TIFF); assuming subsampling inside JPEG data is correct and desubsampling inside JPEG decompression"); + else + TIFFWarningExt(tif->tif_clientdata,module,"Subsampling inside JPEG data does not match subsampling tag values [%d,%d] (nor any other values allowed in TIFF); assuming subsampling inside JPEG data is correct and desubsampling inside JPEG decompression",mh,mv); + } + if (sp->subsampling_force_desubsampling_inside_decompression==0) + { + if (sp->subsampling_horsubsampling_ver) + TIFFWarningExt(tif->tif_clientdata,module,"Subsampling values [%d,%d] are not allowed in TIFF",sp->subsampling_hor,sp->subsampling_ver); + } + } + sp->subsamplingcorrect_done=1; +} + +static int +OJPEGReadHeaderInfo(TIFF* tif) +{ + static const char module[]="OJPEGReadHeaderInfo"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + assert(sp->readheader_done==0); + sp->image_width=tif->tif_dir.td_imagewidth; + sp->image_length=tif->tif_dir.td_imagelength; + if isTiled(tif) + { + sp->strile_width=tif->tif_dir.td_tilewidth; + sp->strile_length=tif->tif_dir.td_tilelength; + sp->strile_length_total=((sp->image_length+sp->strile_length-1)/sp->strile_length)*sp->strile_length; + } + else + { + sp->strile_width=sp->image_width; + sp->strile_length=tif->tif_dir.td_rowsperstrip; + sp->strile_length_total=sp->image_length; + } + if (tif->tif_dir.td_samplesperpixel==1) + { + sp->samples_per_pixel=1; + sp->plane_sample_offset=0; + sp->samples_per_pixel_per_plane=sp->samples_per_pixel; + sp->subsampling_hor=1; + sp->subsampling_ver=1; + } + else + { + if (tif->tif_dir.td_samplesperpixel!=3) + { + TIFFErrorExt(tif->tif_clientdata,module,"SamplesPerPixel %d not supported for this compression scheme",sp->samples_per_pixel); + return(0); + } + sp->samples_per_pixel=3; + sp->plane_sample_offset=0; + if (tif->tif_dir.td_planarconfig==PLANARCONFIG_CONTIG) + sp->samples_per_pixel_per_plane=3; + else + sp->samples_per_pixel_per_plane=1; + } + if (sp->strile_lengthimage_length) + { + if (sp->strile_length%(sp->subsampling_ver*8)!=0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Incompatible vertical subsampling and image strip/tile length"); + return(0); + } + sp->restart_interval=((sp->strile_width+sp->subsampling_hor*8-1)/(sp->subsampling_hor*8))*(sp->strile_length/(sp->subsampling_ver*8)); + } + if (OJPEGReadHeaderInfoSec(tif)==0) + return(0); + sp->sos_end[0].log=1; + sp->sos_end[0].in_buffer_source=sp->in_buffer_source; + sp->sos_end[0].in_buffer_next_strile=sp->in_buffer_next_strile; + sp->sos_end[0].in_buffer_file_pos=sp->in_buffer_file_pos-sp->in_buffer_togo; + sp->sos_end[0].in_buffer_file_togo=sp->in_buffer_file_togo+sp->in_buffer_togo; + sp->readheader_done=1; + return(1); +} + +static int +OJPEGReadSecondarySos(TIFF* tif, uint16 s) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8 m; + assert(s>0); + assert(s<3); + assert(sp->sos_end[0].log!=0); + assert(sp->sos_end[s].log==0); + sp->plane_sample_offset=s-1; + while(sp->sos_end[sp->plane_sample_offset].log==0) + sp->plane_sample_offset--; + sp->in_buffer_source=sp->sos_end[sp->plane_sample_offset].in_buffer_source; + sp->in_buffer_next_strile=sp->sos_end[sp->plane_sample_offset].in_buffer_next_strile; + sp->in_buffer_file_pos=sp->sos_end[sp->plane_sample_offset].in_buffer_file_pos; + sp->in_buffer_file_pos_log=0; + sp->in_buffer_file_togo=sp->sos_end[sp->plane_sample_offset].in_buffer_file_togo; + sp->in_buffer_togo=0; + sp->in_buffer_cur=0; + while(sp->plane_sample_offsetplane_sample_offset++; + if (OJPEGReadHeaderInfoSecStreamSos(tif)==0) + return(0); + sp->sos_end[sp->plane_sample_offset].log=1; + sp->sos_end[sp->plane_sample_offset].in_buffer_source=sp->in_buffer_source; + sp->sos_end[sp->plane_sample_offset].in_buffer_next_strile=sp->in_buffer_next_strile; + sp->sos_end[sp->plane_sample_offset].in_buffer_file_pos=sp->in_buffer_file_pos-sp->in_buffer_togo; + sp->sos_end[sp->plane_sample_offset].in_buffer_file_togo=sp->in_buffer_file_togo+sp->in_buffer_togo; + } + return(1); +} + +static int +OJPEGWriteHeaderInfo(TIFF* tif) +{ + static const char module[]="OJPEGWriteHeaderInfo"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8** m; + uint32 n; + /* if a previous attempt failed, don't try again */ + if (sp->libjpeg_session_active != 0) + return 0; + sp->out_state=ososSoi; + sp->restart_index=0; + jpeg_std_error(&(sp->libjpeg_jpeg_error_mgr)); + sp->libjpeg_jpeg_error_mgr.output_message=OJPEGLibjpegJpegErrorMgrOutputMessage; + sp->libjpeg_jpeg_error_mgr.error_exit=OJPEGLibjpegJpegErrorMgrErrorExit; + sp->libjpeg_jpeg_decompress_struct.err=&(sp->libjpeg_jpeg_error_mgr); + sp->libjpeg_jpeg_decompress_struct.client_data=(void*)tif; + if (jpeg_create_decompress_encap(sp,&(sp->libjpeg_jpeg_decompress_struct))==0) + return(0); + sp->libjpeg_session_active=1; + sp->libjpeg_jpeg_source_mgr.bytes_in_buffer=0; + sp->libjpeg_jpeg_source_mgr.init_source=OJPEGLibjpegJpegSourceMgrInitSource; + sp->libjpeg_jpeg_source_mgr.fill_input_buffer=OJPEGLibjpegJpegSourceMgrFillInputBuffer; + sp->libjpeg_jpeg_source_mgr.skip_input_data=OJPEGLibjpegJpegSourceMgrSkipInputData; + sp->libjpeg_jpeg_source_mgr.resync_to_restart=OJPEGLibjpegJpegSourceMgrResyncToRestart; + sp->libjpeg_jpeg_source_mgr.term_source=OJPEGLibjpegJpegSourceMgrTermSource; + sp->libjpeg_jpeg_decompress_struct.src=&(sp->libjpeg_jpeg_source_mgr); + if (jpeg_read_header_encap(sp,&(sp->libjpeg_jpeg_decompress_struct),1)==0) + return(0); + if ((sp->subsampling_force_desubsampling_inside_decompression==0) && (sp->samples_per_pixel_per_plane>1)) + { + sp->libjpeg_jpeg_decompress_struct.raw_data_out=1; +#if JPEG_LIB_VERSION >= 70 + sp->libjpeg_jpeg_decompress_struct.do_fancy_upsampling=FALSE; +#endif + sp->libjpeg_jpeg_query_style=0; + if (sp->subsampling_convert_log==0) + { + assert(sp->subsampling_convert_ycbcrbuf==0); + assert(sp->subsampling_convert_ycbcrimage==0); + sp->subsampling_convert_ylinelen=((sp->strile_width+sp->subsampling_hor*8-1)/(sp->subsampling_hor*8)*sp->subsampling_hor*8); + sp->subsampling_convert_ylines=sp->subsampling_ver*8; + sp->subsampling_convert_clinelen=sp->subsampling_convert_ylinelen/sp->subsampling_hor; + sp->subsampling_convert_clines=8; + sp->subsampling_convert_ybuflen=sp->subsampling_convert_ylinelen*sp->subsampling_convert_ylines; + sp->subsampling_convert_cbuflen=sp->subsampling_convert_clinelen*sp->subsampling_convert_clines; + sp->subsampling_convert_ycbcrbuflen=sp->subsampling_convert_ybuflen+2*sp->subsampling_convert_cbuflen; + sp->subsampling_convert_ycbcrbuf=_TIFFmalloc(sp->subsampling_convert_ycbcrbuflen); + if (sp->subsampling_convert_ycbcrbuf==0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + sp->subsampling_convert_ybuf=sp->subsampling_convert_ycbcrbuf; + sp->subsampling_convert_cbbuf=sp->subsampling_convert_ybuf+sp->subsampling_convert_ybuflen; + sp->subsampling_convert_crbuf=sp->subsampling_convert_cbbuf+sp->subsampling_convert_cbuflen; + sp->subsampling_convert_ycbcrimagelen=3+sp->subsampling_convert_ylines+2*sp->subsampling_convert_clines; + sp->subsampling_convert_ycbcrimage=_TIFFmalloc(sp->subsampling_convert_ycbcrimagelen*sizeof(uint8*)); + if (sp->subsampling_convert_ycbcrimage==0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + m=sp->subsampling_convert_ycbcrimage; + *m++=(uint8*)(sp->subsampling_convert_ycbcrimage+3); + *m++=(uint8*)(sp->subsampling_convert_ycbcrimage+3+sp->subsampling_convert_ylines); + *m++=(uint8*)(sp->subsampling_convert_ycbcrimage+3+sp->subsampling_convert_ylines+sp->subsampling_convert_clines); + for (n=0; nsubsampling_convert_ylines; n++) + *m++=sp->subsampling_convert_ybuf+n*sp->subsampling_convert_ylinelen; + for (n=0; nsubsampling_convert_clines; n++) + *m++=sp->subsampling_convert_cbbuf+n*sp->subsampling_convert_clinelen; + for (n=0; nsubsampling_convert_clines; n++) + *m++=sp->subsampling_convert_crbuf+n*sp->subsampling_convert_clinelen; + sp->subsampling_convert_clinelenout=((sp->strile_width+sp->subsampling_hor-1)/sp->subsampling_hor); + sp->subsampling_convert_state=0; + sp->bytes_per_line=sp->subsampling_convert_clinelenout*(sp->subsampling_ver*sp->subsampling_hor+2); + sp->lines_per_strile=((sp->strile_length+sp->subsampling_ver-1)/sp->subsampling_ver); + sp->subsampling_convert_log=1; + } + } + else + { + sp->libjpeg_jpeg_decompress_struct.jpeg_color_space=JCS_UNKNOWN; + sp->libjpeg_jpeg_decompress_struct.out_color_space=JCS_UNKNOWN; + sp->libjpeg_jpeg_query_style=1; + sp->bytes_per_line=sp->samples_per_pixel_per_plane*sp->strile_width; + sp->lines_per_strile=sp->strile_length; + } + if (jpeg_start_decompress_encap(sp,&(sp->libjpeg_jpeg_decompress_struct))==0) + return(0); + sp->writeheader_done=1; + return(1); +} + +static void +OJPEGLibjpegSessionAbort(TIFF* tif) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + assert(sp->libjpeg_session_active!=0); + jpeg_destroy((jpeg_common_struct*)(&(sp->libjpeg_jpeg_decompress_struct))); + sp->libjpeg_session_active=0; +} + +static int +OJPEGReadHeaderInfoSec(TIFF* tif) +{ + static const char module[]="OJPEGReadHeaderInfoSec"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8 m; + uint16 n; + uint8 o; + if (sp->file_size==0) + sp->file_size=TIFFGetFileSize(tif); + if (sp->jpeg_interchange_format!=0) + { + if (sp->jpeg_interchange_format>=sp->file_size) + { + sp->jpeg_interchange_format=0; + sp->jpeg_interchange_format_length=0; + } + else + { + if ((sp->jpeg_interchange_format_length==0) || (sp->jpeg_interchange_format+sp->jpeg_interchange_format_length>sp->file_size)) + sp->jpeg_interchange_format_length=sp->file_size-sp->jpeg_interchange_format; + } + } + sp->in_buffer_source=osibsNotSetYet; + sp->in_buffer_next_strile=0; + sp->in_buffer_strile_count=tif->tif_dir.td_nstrips; + sp->in_buffer_file_togo=0; + sp->in_buffer_togo=0; + do + { + if (OJPEGReadBytePeek(sp,&m)==0) + return(0); + if (m!=255) + break; + OJPEGReadByteAdvance(sp); + do + { + if (OJPEGReadByte(sp,&m)==0) + return(0); + } while(m==255); + switch(m) + { + case JPEG_MARKER_SOI: + /* this type of marker has no data, and should be skipped */ + break; + case JPEG_MARKER_COM: + case JPEG_MARKER_APP0: + case JPEG_MARKER_APP0+1: + case JPEG_MARKER_APP0+2: + case JPEG_MARKER_APP0+3: + case JPEG_MARKER_APP0+4: + case JPEG_MARKER_APP0+5: + case JPEG_MARKER_APP0+6: + case JPEG_MARKER_APP0+7: + case JPEG_MARKER_APP0+8: + case JPEG_MARKER_APP0+9: + case JPEG_MARKER_APP0+10: + case JPEG_MARKER_APP0+11: + case JPEG_MARKER_APP0+12: + case JPEG_MARKER_APP0+13: + case JPEG_MARKER_APP0+14: + case JPEG_MARKER_APP0+15: + /* this type of marker has data, but it has no use to us (and no place here) and should be skipped */ + if (OJPEGReadWord(sp,&n)==0) + return(0); + if (n<2) + { + if (sp->subsamplingcorrect==0) + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt JPEG data"); + return(0); + } + if (n>2) + OJPEGReadSkip(sp,n-2); + break; + case JPEG_MARKER_DRI: + if (OJPEGReadHeaderInfoSecStreamDri(tif)==0) + return(0); + break; + case JPEG_MARKER_DQT: + if (OJPEGReadHeaderInfoSecStreamDqt(tif)==0) + return(0); + break; + case JPEG_MARKER_DHT: + if (OJPEGReadHeaderInfoSecStreamDht(tif)==0) + return(0); + break; + case JPEG_MARKER_SOF0: + case JPEG_MARKER_SOF1: + case JPEG_MARKER_SOF3: + if (OJPEGReadHeaderInfoSecStreamSof(tif,m)==0) + return(0); + if (sp->subsamplingcorrect!=0) + return(1); + break; + case JPEG_MARKER_SOS: + if (sp->subsamplingcorrect!=0) + return(1); + assert(sp->plane_sample_offset==0); + if (OJPEGReadHeaderInfoSecStreamSos(tif)==0) + return(0); + break; + default: + TIFFErrorExt(tif->tif_clientdata,module,"Unknown marker type %d in JPEG data",m); + return(0); + } + } while(m!=JPEG_MARKER_SOS); + if (sp->subsamplingcorrect) + return(1); + if (sp->sof_log==0) + { + if (OJPEGReadHeaderInfoSecTablesQTable(tif)==0) + return(0); + sp->sof_marker_id=JPEG_MARKER_SOF0; + for (o=0; osamples_per_pixel; o++) + sp->sof_c[o]=o; + sp->sof_hv[0]=((sp->subsampling_hor<<4)|sp->subsampling_ver); + for (o=1; osamples_per_pixel; o++) + sp->sof_hv[o]=17; + sp->sof_x=sp->strile_width; + sp->sof_y=sp->strile_length_total; + sp->sof_log=1; + if (OJPEGReadHeaderInfoSecTablesDcTable(tif)==0) + return(0); + if (OJPEGReadHeaderInfoSecTablesAcTable(tif)==0) + return(0); + for (o=1; osamples_per_pixel; o++) + sp->sos_cs[o]=o; + } + return(1); +} + +static int +OJPEGReadHeaderInfoSecStreamDri(TIFF* tif) +{ + /* this could easilly cause trouble in some cases... but no such cases have occured sofar */ + static const char module[]="OJPEGReadHeaderInfoSecStreamDri"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint16 m; + if (OJPEGReadWord(sp,&m)==0) + return(0); + if (m!=4) + { + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt DRI marker in JPEG data"); + return(0); + } + if (OJPEGReadWord(sp,&m)==0) + return(0); + sp->restart_interval=m; + return(1); +} + +static int +OJPEGReadHeaderInfoSecStreamDqt(TIFF* tif) +{ + /* this is a table marker, and it is to be saved as a whole for exact pushing on the jpeg stream later on */ + static const char module[]="OJPEGReadHeaderInfoSecStreamDqt"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint16 m; + uint32 na; + uint8* nb; + uint8 o; + if (OJPEGReadWord(sp,&m)==0) + return(0); + if (m<=2) + { + if (sp->subsamplingcorrect==0) + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt DQT marker in JPEG data"); + return(0); + } + if (sp->subsamplingcorrect!=0) + OJPEGReadSkip(sp,m-2); + else + { + m-=2; + do + { + if (m<65) + { + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt DQT marker in JPEG data"); + return(0); + } + na=sizeof(uint32)+69; + nb=_TIFFmalloc(na); + if (nb==0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + *(uint32*)nb=na; + nb[sizeof(uint32)]=255; + nb[sizeof(uint32)+1]=JPEG_MARKER_DQT; + nb[sizeof(uint32)+2]=0; + nb[sizeof(uint32)+3]=67; + if (OJPEGReadBlock(sp,65,&nb[sizeof(uint32)+4])==0) { + _TIFFfree(nb); + return(0); + } + o=nb[sizeof(uint32)+4]&15; + if (3tif_clientdata,module,"Corrupt DQT marker in JPEG data"); + _TIFFfree(nb); + return(0); + } + if (sp->qtable[o]!=0) + _TIFFfree(sp->qtable[o]); + sp->qtable[o]=nb; + m-=65; + } while(m>0); + } + return(1); +} + +static int +OJPEGReadHeaderInfoSecStreamDht(TIFF* tif) +{ + /* this is a table marker, and it is to be saved as a whole for exact pushing on the jpeg stream later on */ + /* TODO: the following assumes there is only one table in this marker... but i'm not quite sure that assumption is guaranteed correct */ + static const char module[]="OJPEGReadHeaderInfoSecStreamDht"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint16 m; + uint32 na; + uint8* nb; + uint8 o; + if (OJPEGReadWord(sp,&m)==0) + return(0); + if (m<=2) + { + if (sp->subsamplingcorrect==0) + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt DHT marker in JPEG data"); + return(0); + } + if (sp->subsamplingcorrect!=0) + { + OJPEGReadSkip(sp,m-2); + } + else + { + na=sizeof(uint32)+2+m; + nb=_TIFFmalloc(na); + if (nb==0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + *(uint32*)nb=na; + nb[sizeof(uint32)]=255; + nb[sizeof(uint32)+1]=JPEG_MARKER_DHT; + nb[sizeof(uint32)+2]=(m>>8); + nb[sizeof(uint32)+3]=(m&255); + if (OJPEGReadBlock(sp,m-2,&nb[sizeof(uint32)+4])==0) + return(0); + o=nb[sizeof(uint32)+4]; + if ((o&240)==0) + { + if (3tif_clientdata,module,"Corrupt DHT marker in JPEG data"); + return(0); + } + if (sp->dctable[o]!=0) + _TIFFfree(sp->dctable[o]); + sp->dctable[o]=nb; + } + else + { + if ((o&240)!=16) + { + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt DHT marker in JPEG data"); + return(0); + } + o&=15; + if (3tif_clientdata,module,"Corrupt DHT marker in JPEG data"); + return(0); + } + if (sp->actable[o]!=0) + _TIFFfree(sp->actable[o]); + sp->actable[o]=nb; + } + } + return(1); +} + +static int +OJPEGReadHeaderInfoSecStreamSof(TIFF* tif, uint8 marker_id) +{ + /* this marker needs to be checked, and part of its data needs to be saved for regeneration later on */ + static const char module[]="OJPEGReadHeaderInfoSecStreamSof"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint16 m; + uint16 n; + uint8 o; + uint16 p; + uint16 q; + if (sp->sof_log!=0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt JPEG data"); + return(0); + } + if (sp->subsamplingcorrect==0) + sp->sof_marker_id=marker_id; + /* Lf: data length */ + if (OJPEGReadWord(sp,&m)==0) + return(0); + if (m<11) + { + if (sp->subsamplingcorrect==0) + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt SOF marker in JPEG data"); + return(0); + } + m-=8; + if (m%3!=0) + { + if (sp->subsamplingcorrect==0) + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt SOF marker in JPEG data"); + return(0); + } + n=m/3; + if (sp->subsamplingcorrect==0) + { + if (n!=sp->samples_per_pixel) + { + TIFFErrorExt(tif->tif_clientdata,module,"JPEG compressed data indicates unexpected number of samples"); + return(0); + } + } + /* P: Sample precision */ + if (OJPEGReadByte(sp,&o)==0) + return(0); + if (o!=8) + { + if (sp->subsamplingcorrect==0) + TIFFErrorExt(tif->tif_clientdata,module,"JPEG compressed data indicates unexpected number of bits per sample"); + return(0); + } + /* Y: Number of lines, X: Number of samples per line */ + if (sp->subsamplingcorrect) + OJPEGReadSkip(sp,4); + else + { + /* Y: Number of lines */ + if (OJPEGReadWord(sp,&p)==0) + return(0); + if (((uint32)pimage_length) && ((uint32)pstrile_length_total)) + { + TIFFErrorExt(tif->tif_clientdata,module,"JPEG compressed data indicates unexpected height"); + return(0); + } + sp->sof_y=p; + /* X: Number of samples per line */ + if (OJPEGReadWord(sp,&p)==0) + return(0); + if (((uint32)pimage_width) && ((uint32)pstrile_width)) + { + TIFFErrorExt(tif->tif_clientdata,module,"JPEG compressed data indicates unexpected width"); + return(0); + } + if ((uint32)p>sp->strile_width) + { + TIFFErrorExt(tif->tif_clientdata,module,"JPEG compressed data image width exceeds expected image width"); + return(0); + } + sp->sof_x=p; + } + /* Nf: Number of image components in frame */ + if (OJPEGReadByte(sp,&o)==0) + return(0); + if (o!=n) + { + if (sp->subsamplingcorrect==0) + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt SOF marker in JPEG data"); + return(0); + } + /* per component stuff */ + /* TODO: double-check that flow implies that n cannot be as big as to make us overflow sof_c, sof_hv and sof_tq arrays */ + for (q=0; qsubsamplingcorrect==0) + sp->sof_c[q]=o; + /* H: Horizontal sampling factor, and V: Vertical sampling factor */ + if (OJPEGReadByte(sp,&o)==0) + return(0); + if (sp->subsamplingcorrect!=0) + { + if (q==0) + { + sp->subsampling_hor=(o>>4); + sp->subsampling_ver=(o&15); + if (((sp->subsampling_hor!=1) && (sp->subsampling_hor!=2) && (sp->subsampling_hor!=4)) || + ((sp->subsampling_ver!=1) && (sp->subsampling_ver!=2) && (sp->subsampling_ver!=4))) + sp->subsampling_force_desubsampling_inside_decompression=1; + } + else + { + if (o!=17) + sp->subsampling_force_desubsampling_inside_decompression=1; + } + } + else + { + sp->sof_hv[q]=o; + if (sp->subsampling_force_desubsampling_inside_decompression==0) + { + if (q==0) + { + if (o!=((sp->subsampling_hor<<4)|sp->subsampling_ver)) + { + TIFFErrorExt(tif->tif_clientdata,module,"JPEG compressed data indicates unexpected subsampling values"); + return(0); + } + } + else + { + if (o!=17) + { + TIFFErrorExt(tif->tif_clientdata,module,"JPEG compressed data indicates unexpected subsampling values"); + return(0); + } + } + } + } + /* Tq: Quantization table destination selector */ + if (OJPEGReadByte(sp,&o)==0) + return(0); + if (sp->subsamplingcorrect==0) + sp->sof_tq[q]=o; + } + if (sp->subsamplingcorrect==0) + sp->sof_log=1; + return(1); +} + +static int +OJPEGReadHeaderInfoSecStreamSos(TIFF* tif) +{ + /* this marker needs to be checked, and part of its data needs to be saved for regeneration later on */ + static const char module[]="OJPEGReadHeaderInfoSecStreamSos"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint16 m; + uint8 n; + uint8 o; + assert(sp->subsamplingcorrect==0); + if (sp->sof_log==0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt SOS marker in JPEG data"); + return(0); + } + /* Ls */ + if (OJPEGReadWord(sp,&m)==0) + return(0); + if (m!=6+sp->samples_per_pixel_per_plane*2) + { + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt SOS marker in JPEG data"); + return(0); + } + /* Ns */ + if (OJPEGReadByte(sp,&n)==0) + return(0); + if (n!=sp->samples_per_pixel_per_plane) + { + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt SOS marker in JPEG data"); + return(0); + } + /* Cs, Td, and Ta */ + for (o=0; osamples_per_pixel_per_plane; o++) + { + /* Cs */ + if (OJPEGReadByte(sp,&n)==0) + return(0); + sp->sos_cs[sp->plane_sample_offset+o]=n; + /* Td and Ta */ + if (OJPEGReadByte(sp,&n)==0) + return(0); + sp->sos_tda[sp->plane_sample_offset+o]=n; + } + /* skip Ss, Se, Ah, en Al -> no check, as per Tom Lane recommendation, as per LibJpeg source */ + OJPEGReadSkip(sp,3); + return(1); +} + +static int +OJPEGReadHeaderInfoSecTablesQTable(TIFF* tif) +{ + static const char module[]="OJPEGReadHeaderInfoSecTablesQTable"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8 m; + uint8 n; + uint32 oa; + uint8* ob; + uint32 p; + if (sp->qtable_offset[0]==0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Missing JPEG tables"); + return(0); + } + sp->in_buffer_file_pos_log=0; + for (m=0; msamples_per_pixel; m++) + { + if ((sp->qtable_offset[m]!=0) && ((m==0) || (sp->qtable_offset[m]!=sp->qtable_offset[m-1]))) + { + for (n=0; nqtable_offset[m]==sp->qtable_offset[n]) + { + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt JpegQTables tag value"); + return(0); + } + } + oa=sizeof(uint32)+69; + ob=_TIFFmalloc(oa); + if (ob==0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + *(uint32*)ob=oa; + ob[sizeof(uint32)]=255; + ob[sizeof(uint32)+1]=JPEG_MARKER_DQT; + ob[sizeof(uint32)+2]=0; + ob[sizeof(uint32)+3]=67; + ob[sizeof(uint32)+4]=m; + TIFFSeekFile(tif,sp->qtable_offset[m],SEEK_SET); + p=TIFFReadFile(tif,&ob[sizeof(uint32)+5],64); + if (p!=64) + return(0); + sp->qtable[m]=ob; + sp->sof_tq[m]=m; + } + else + sp->sof_tq[m]=sp->sof_tq[m-1]; + } + return(1); +} + +static int +OJPEGReadHeaderInfoSecTablesDcTable(TIFF* tif) +{ + static const char module[]="OJPEGReadHeaderInfoSecTablesDcTable"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8 m; + uint8 n; + uint8 o[16]; + uint32 p; + uint32 q; + uint32 ra; + uint8* rb; + if (sp->dctable_offset[0]==0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Missing JPEG tables"); + return(0); + } + sp->in_buffer_file_pos_log=0; + for (m=0; msamples_per_pixel; m++) + { + if ((sp->dctable_offset[m]!=0) && ((m==0) || (sp->dctable_offset[m]!=sp->dctable_offset[m-1]))) + { + for (n=0; ndctable_offset[m]==sp->dctable_offset[n]) + { + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt JpegDcTables tag value"); + return(0); + } + } + TIFFSeekFile(tif,sp->dctable_offset[m],SEEK_SET); + p=TIFFReadFile(tif,o,16); + if (p!=16) + return(0); + q=0; + for (n=0; n<16; n++) + q+=o[n]; + ra=sizeof(uint32)+21+q; + rb=_TIFFmalloc(ra); + if (rb==0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + *(uint32*)rb=ra; + rb[sizeof(uint32)]=255; + rb[sizeof(uint32)+1]=JPEG_MARKER_DHT; + rb[sizeof(uint32)+2]=((19+q)>>8); + rb[sizeof(uint32)+3]=((19+q)&255); + rb[sizeof(uint32)+4]=m; + for (n=0; n<16; n++) + rb[sizeof(uint32)+5+n]=o[n]; + p=TIFFReadFile(tif,&(rb[sizeof(uint32)+21]),q); + if (p!=q) + return(0); + sp->dctable[m]=rb; + sp->sos_tda[m]=(m<<4); + } + else + sp->sos_tda[m]=sp->sos_tda[m-1]; + } + return(1); +} + +static int +OJPEGReadHeaderInfoSecTablesAcTable(TIFF* tif) +{ + static const char module[]="OJPEGReadHeaderInfoSecTablesAcTable"; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8 m; + uint8 n; + uint8 o[16]; + uint32 p; + uint32 q; + uint32 ra; + uint8* rb; + if (sp->actable_offset[0]==0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Missing JPEG tables"); + return(0); + } + sp->in_buffer_file_pos_log=0; + for (m=0; msamples_per_pixel; m++) + { + if ((sp->actable_offset[m]!=0) && ((m==0) || (sp->actable_offset[m]!=sp->actable_offset[m-1]))) + { + for (n=0; nactable_offset[m]==sp->actable_offset[n]) + { + TIFFErrorExt(tif->tif_clientdata,module,"Corrupt JpegAcTables tag value"); + return(0); + } + } + TIFFSeekFile(tif,sp->actable_offset[m],SEEK_SET); + p=TIFFReadFile(tif,o,16); + if (p!=16) + return(0); + q=0; + for (n=0; n<16; n++) + q+=o[n]; + ra=sizeof(uint32)+21+q; + rb=_TIFFmalloc(ra); + if (rb==0) + { + TIFFErrorExt(tif->tif_clientdata,module,"Out of memory"); + return(0); + } + *(uint32*)rb=ra; + rb[sizeof(uint32)]=255; + rb[sizeof(uint32)+1]=JPEG_MARKER_DHT; + rb[sizeof(uint32)+2]=((19+q)>>8); + rb[sizeof(uint32)+3]=((19+q)&255); + rb[sizeof(uint32)+4]=(16|m); + for (n=0; n<16; n++) + rb[sizeof(uint32)+5+n]=o[n]; + p=TIFFReadFile(tif,&(rb[sizeof(uint32)+21]),q); + if (p!=q) + return(0); + sp->actable[m]=rb; + sp->sos_tda[m]=(sp->sos_tda[m]|m); + } + else + sp->sos_tda[m]=(sp->sos_tda[m]|(sp->sos_tda[m-1]&15)); + } + return(1); +} + +static int +OJPEGReadBufferFill(OJPEGState* sp) +{ + uint16 m; + tmsize_t n; + /* TODO: double-check: when subsamplingcorrect is set, no call to TIFFErrorExt or TIFFWarningExt should be made + * in any other case, seek or read errors should be passed through */ + do + { + if (sp->in_buffer_file_togo!=0) + { + if (sp->in_buffer_file_pos_log==0) + { + TIFFSeekFile(sp->tif,sp->in_buffer_file_pos,SEEK_SET); + sp->in_buffer_file_pos_log=1; + } + m=OJPEG_BUFFER; + if ((uint64)m>sp->in_buffer_file_togo) + m=(uint16)sp->in_buffer_file_togo; + n=TIFFReadFile(sp->tif,sp->in_buffer,(tmsize_t)m); + if (n==0) + return(0); + assert(n>0); + assert(n<=OJPEG_BUFFER); + assert(n<65536); + assert((uint64)n<=sp->in_buffer_file_togo); + m=(uint16)n; + sp->in_buffer_togo=m; + sp->in_buffer_cur=sp->in_buffer; + sp->in_buffer_file_togo-=m; + sp->in_buffer_file_pos+=m; + break; + } + sp->in_buffer_file_pos_log=0; + switch(sp->in_buffer_source) + { + case osibsNotSetYet: + if (sp->jpeg_interchange_format!=0) + { + sp->in_buffer_file_pos=sp->jpeg_interchange_format; + sp->in_buffer_file_togo=sp->jpeg_interchange_format_length; + } + sp->in_buffer_source=osibsJpegInterchangeFormat; + break; + case osibsJpegInterchangeFormat: + sp->in_buffer_source=osibsStrile; + case osibsStrile: + if (!_TIFFFillStriles( sp->tif ) + || sp->tif->tif_dir.td_stripoffset == NULL + || sp->tif->tif_dir.td_stripbytecount == NULL) + return 0; + + if (sp->in_buffer_next_strile==sp->in_buffer_strile_count) + sp->in_buffer_source=osibsEof; + else + { + sp->in_buffer_file_pos=sp->tif->tif_dir.td_stripoffset[sp->in_buffer_next_strile]; + if (sp->in_buffer_file_pos!=0) + { + if (sp->in_buffer_file_pos>=sp->file_size) + sp->in_buffer_file_pos=0; + else if (sp->tif->tif_dir.td_stripbytecount==NULL) + sp->in_buffer_file_togo=sp->file_size-sp->in_buffer_file_pos; + else + { + if (sp->tif->tif_dir.td_stripbytecount == 0) { + TIFFErrorExt(sp->tif->tif_clientdata,sp->tif->tif_name,"Strip byte counts are missing"); + return(0); + } + sp->in_buffer_file_togo=sp->tif->tif_dir.td_stripbytecount[sp->in_buffer_next_strile]; + if (sp->in_buffer_file_togo==0) + sp->in_buffer_file_pos=0; + else if (sp->in_buffer_file_pos+sp->in_buffer_file_togo>sp->file_size) + sp->in_buffer_file_togo=sp->file_size-sp->in_buffer_file_pos; + } + } + sp->in_buffer_next_strile++; + } + break; + default: + return(0); + } + } while (1); + return(1); +} + +static int +OJPEGReadByte(OJPEGState* sp, uint8* byte) +{ + if (sp->in_buffer_togo==0) + { + if (OJPEGReadBufferFill(sp)==0) + return(0); + assert(sp->in_buffer_togo>0); + } + *byte=*(sp->in_buffer_cur); + sp->in_buffer_cur++; + sp->in_buffer_togo--; + return(1); +} + +static int +OJPEGReadBytePeek(OJPEGState* sp, uint8* byte) +{ + if (sp->in_buffer_togo==0) + { + if (OJPEGReadBufferFill(sp)==0) + return(0); + assert(sp->in_buffer_togo>0); + } + *byte=*(sp->in_buffer_cur); + return(1); +} + +static void +OJPEGReadByteAdvance(OJPEGState* sp) +{ + assert(sp->in_buffer_togo>0); + sp->in_buffer_cur++; + sp->in_buffer_togo--; +} + +static int +OJPEGReadWord(OJPEGState* sp, uint16* word) +{ + uint8 m; + if (OJPEGReadByte(sp,&m)==0) + return(0); + *word=(m<<8); + if (OJPEGReadByte(sp,&m)==0) + return(0); + *word|=m; + return(1); +} + +static int +OJPEGReadBlock(OJPEGState* sp, uint16 len, void* mem) +{ + uint16 mlen; + uint8* mmem; + uint16 n; + assert(len>0); + mlen=len; + mmem=mem; + do + { + if (sp->in_buffer_togo==0) + { + if (OJPEGReadBufferFill(sp)==0) + return(0); + assert(sp->in_buffer_togo>0); + } + n=mlen; + if (n>sp->in_buffer_togo) + n=sp->in_buffer_togo; + _TIFFmemcpy(mmem,sp->in_buffer_cur,n); + sp->in_buffer_cur+=n; + sp->in_buffer_togo-=n; + mlen-=n; + mmem+=n; + } while(mlen>0); + return(1); +} + +static void +OJPEGReadSkip(OJPEGState* sp, uint16 len) +{ + uint16 m; + uint16 n; + m=len; + n=m; + if (n>sp->in_buffer_togo) + n=sp->in_buffer_togo; + sp->in_buffer_cur+=n; + sp->in_buffer_togo-=n; + m-=n; + if (m>0) + { + assert(sp->in_buffer_togo==0); + n=m; + if ((uint64)n>sp->in_buffer_file_togo) + n=(uint16)sp->in_buffer_file_togo; + sp->in_buffer_file_pos+=n; + sp->in_buffer_file_togo-=n; + sp->in_buffer_file_pos_log=0; + /* we don't skip past jpeginterchangeformat/strile block... + * if that is asked from us, we're dealing with totally bazurk + * data anyway, and we've not seen this happening on any + * testfile, so we might as well likely cause some other + * meaningless error to be passed at some later time + */ + } +} + +static int +OJPEGWriteStream(TIFF* tif, void** mem, uint32* len) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + *len=0; + do + { + assert(sp->out_state<=ososEoi); + switch(sp->out_state) + { + case ososSoi: + OJPEGWriteStreamSoi(tif,mem,len); + break; + case ososQTable0: + OJPEGWriteStreamQTable(tif,0,mem,len); + break; + case ososQTable1: + OJPEGWriteStreamQTable(tif,1,mem,len); + break; + case ososQTable2: + OJPEGWriteStreamQTable(tif,2,mem,len); + break; + case ososQTable3: + OJPEGWriteStreamQTable(tif,3,mem,len); + break; + case ososDcTable0: + OJPEGWriteStreamDcTable(tif,0,mem,len); + break; + case ososDcTable1: + OJPEGWriteStreamDcTable(tif,1,mem,len); + break; + case ososDcTable2: + OJPEGWriteStreamDcTable(tif,2,mem,len); + break; + case ososDcTable3: + OJPEGWriteStreamDcTable(tif,3,mem,len); + break; + case ososAcTable0: + OJPEGWriteStreamAcTable(tif,0,mem,len); + break; + case ososAcTable1: + OJPEGWriteStreamAcTable(tif,1,mem,len); + break; + case ososAcTable2: + OJPEGWriteStreamAcTable(tif,2,mem,len); + break; + case ososAcTable3: + OJPEGWriteStreamAcTable(tif,3,mem,len); + break; + case ososDri: + OJPEGWriteStreamDri(tif,mem,len); + break; + case ososSof: + OJPEGWriteStreamSof(tif,mem,len); + break; + case ososSos: + OJPEGWriteStreamSos(tif,mem,len); + break; + case ososCompressed: + if (OJPEGWriteStreamCompressed(tif,mem,len)==0) + return(0); + break; + case ososRst: + OJPEGWriteStreamRst(tif,mem,len); + break; + case ososEoi: + OJPEGWriteStreamEoi(tif,mem,len); + break; + } + } while (*len==0); + return(1); +} + +static void +OJPEGWriteStreamSoi(TIFF* tif, void** mem, uint32* len) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + assert(OJPEG_BUFFER>=2); + sp->out_buffer[0]=255; + sp->out_buffer[1]=JPEG_MARKER_SOI; + *len=2; + *mem=(void*)sp->out_buffer; + sp->out_state++; +} + +static void +OJPEGWriteStreamQTable(TIFF* tif, uint8 table_index, void** mem, uint32* len) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + if (sp->qtable[table_index]!=0) + { + *mem=(void*)(sp->qtable[table_index]+sizeof(uint32)); + *len=*((uint32*)sp->qtable[table_index])-sizeof(uint32); + } + sp->out_state++; +} + +static void +OJPEGWriteStreamDcTable(TIFF* tif, uint8 table_index, void** mem, uint32* len) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + if (sp->dctable[table_index]!=0) + { + *mem=(void*)(sp->dctable[table_index]+sizeof(uint32)); + *len=*((uint32*)sp->dctable[table_index])-sizeof(uint32); + } + sp->out_state++; +} + +static void +OJPEGWriteStreamAcTable(TIFF* tif, uint8 table_index, void** mem, uint32* len) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + if (sp->actable[table_index]!=0) + { + *mem=(void*)(sp->actable[table_index]+sizeof(uint32)); + *len=*((uint32*)sp->actable[table_index])-sizeof(uint32); + } + sp->out_state++; +} + +static void +OJPEGWriteStreamDri(TIFF* tif, void** mem, uint32* len) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + assert(OJPEG_BUFFER>=6); + if (sp->restart_interval!=0) + { + sp->out_buffer[0]=255; + sp->out_buffer[1]=JPEG_MARKER_DRI; + sp->out_buffer[2]=0; + sp->out_buffer[3]=4; + sp->out_buffer[4]=(sp->restart_interval>>8); + sp->out_buffer[5]=(sp->restart_interval&255); + *len=6; + *mem=(void*)sp->out_buffer; + } + sp->out_state++; +} + +static void +OJPEGWriteStreamSof(TIFF* tif, void** mem, uint32* len) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8 m; + assert(OJPEG_BUFFER>=2+8+sp->samples_per_pixel_per_plane*3); + assert(255>=8+sp->samples_per_pixel_per_plane*3); + sp->out_buffer[0]=255; + sp->out_buffer[1]=sp->sof_marker_id; + /* Lf */ + sp->out_buffer[2]=0; + sp->out_buffer[3]=8+sp->samples_per_pixel_per_plane*3; + /* P */ + sp->out_buffer[4]=8; + /* Y */ + sp->out_buffer[5]=(sp->sof_y>>8); + sp->out_buffer[6]=(sp->sof_y&255); + /* X */ + sp->out_buffer[7]=(sp->sof_x>>8); + sp->out_buffer[8]=(sp->sof_x&255); + /* Nf */ + sp->out_buffer[9]=sp->samples_per_pixel_per_plane; + for (m=0; msamples_per_pixel_per_plane; m++) + { + /* C */ + sp->out_buffer[10+m*3]=sp->sof_c[sp->plane_sample_offset+m]; + /* H and V */ + sp->out_buffer[10+m*3+1]=sp->sof_hv[sp->plane_sample_offset+m]; + /* Tq */ + sp->out_buffer[10+m*3+2]=sp->sof_tq[sp->plane_sample_offset+m]; + } + *len=10+sp->samples_per_pixel_per_plane*3; + *mem=(void*)sp->out_buffer; + sp->out_state++; +} + +static void +OJPEGWriteStreamSos(TIFF* tif, void** mem, uint32* len) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + uint8 m; + assert(OJPEG_BUFFER>=2+6+sp->samples_per_pixel_per_plane*2); + assert(255>=6+sp->samples_per_pixel_per_plane*2); + sp->out_buffer[0]=255; + sp->out_buffer[1]=JPEG_MARKER_SOS; + /* Ls */ + sp->out_buffer[2]=0; + sp->out_buffer[3]=6+sp->samples_per_pixel_per_plane*2; + /* Ns */ + sp->out_buffer[4]=sp->samples_per_pixel_per_plane; + for (m=0; msamples_per_pixel_per_plane; m++) + { + /* Cs */ + sp->out_buffer[5+m*2]=sp->sos_cs[sp->plane_sample_offset+m]; + /* Td and Ta */ + sp->out_buffer[5+m*2+1]=sp->sos_tda[sp->plane_sample_offset+m]; + } + /* Ss */ + sp->out_buffer[5+sp->samples_per_pixel_per_plane*2]=0; + /* Se */ + sp->out_buffer[5+sp->samples_per_pixel_per_plane*2+1]=63; + /* Ah and Al */ + sp->out_buffer[5+sp->samples_per_pixel_per_plane*2+2]=0; + *len=8+sp->samples_per_pixel_per_plane*2; + *mem=(void*)sp->out_buffer; + sp->out_state++; +} + +static int +OJPEGWriteStreamCompressed(TIFF* tif, void** mem, uint32* len) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + if (sp->in_buffer_togo==0) + { + if (OJPEGReadBufferFill(sp)==0) + return(0); + assert(sp->in_buffer_togo>0); + } + *len=sp->in_buffer_togo; + *mem=(void*)sp->in_buffer_cur; + sp->in_buffer_togo=0; + if (sp->in_buffer_file_togo==0) + { + switch(sp->in_buffer_source) + { + case osibsStrile: + if (sp->in_buffer_next_strilein_buffer_strile_count) + sp->out_state=ososRst; + else + sp->out_state=ososEoi; + break; + case osibsEof: + sp->out_state=ososEoi; + break; + default: + break; + } + } + return(1); +} + +static void +OJPEGWriteStreamRst(TIFF* tif, void** mem, uint32* len) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + assert(OJPEG_BUFFER>=2); + sp->out_buffer[0]=255; + sp->out_buffer[1]=JPEG_MARKER_RST0+sp->restart_index; + sp->restart_index++; + if (sp->restart_index==8) + sp->restart_index=0; + *len=2; + *mem=(void*)sp->out_buffer; + sp->out_state=ososCompressed; +} + +static void +OJPEGWriteStreamEoi(TIFF* tif, void** mem, uint32* len) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + assert(OJPEG_BUFFER>=2); + sp->out_buffer[0]=255; + sp->out_buffer[1]=JPEG_MARKER_EOI; + *len=2; + *mem=(void*)sp->out_buffer; +} + +#ifndef LIBJPEG_ENCAP_EXTERNAL +static int +jpeg_create_decompress_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo) +{ + return(SETJMP(sp->exit_jmpbuf)?0:(jpeg_create_decompress(cinfo),1)); +} +#endif + +#ifndef LIBJPEG_ENCAP_EXTERNAL +static int +jpeg_read_header_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo, uint8 require_image) +{ + return(SETJMP(sp->exit_jmpbuf)?0:(jpeg_read_header(cinfo,require_image),1)); +} +#endif + +#ifndef LIBJPEG_ENCAP_EXTERNAL +static int +jpeg_start_decompress_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo) +{ + return(SETJMP(sp->exit_jmpbuf)?0:(jpeg_start_decompress(cinfo),1)); +} +#endif + +#ifndef LIBJPEG_ENCAP_EXTERNAL +static int +jpeg_read_scanlines_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo, void* scanlines, uint32 max_lines) +{ + return(SETJMP(sp->exit_jmpbuf)?0:(jpeg_read_scanlines(cinfo,scanlines,max_lines),1)); +} +#endif + +#ifndef LIBJPEG_ENCAP_EXTERNAL +static int +jpeg_read_raw_data_encap(OJPEGState* sp, jpeg_decompress_struct* cinfo, void* data, uint32 max_lines) +{ + return(SETJMP(sp->exit_jmpbuf)?0:(jpeg_read_raw_data(cinfo,data,max_lines),1)); +} +#endif + +#ifndef LIBJPEG_ENCAP_EXTERNAL +static void +jpeg_encap_unwind(TIFF* tif) +{ + OJPEGState* sp=(OJPEGState*)tif->tif_data; + LONGJMP(sp->exit_jmpbuf,1); +} +#endif + +static void +OJPEGLibjpegJpegErrorMgrOutputMessage(jpeg_common_struct* cinfo) +{ + char buffer[JMSG_LENGTH_MAX]; + (*cinfo->err->format_message)(cinfo,buffer); + TIFFWarningExt(((TIFF*)(cinfo->client_data))->tif_clientdata,"LibJpeg","%s",buffer); +} + +static void +OJPEGLibjpegJpegErrorMgrErrorExit(jpeg_common_struct* cinfo) +{ + char buffer[JMSG_LENGTH_MAX]; + (*cinfo->err->format_message)(cinfo,buffer); + TIFFErrorExt(((TIFF*)(cinfo->client_data))->tif_clientdata,"LibJpeg","%s",buffer); + jpeg_encap_unwind((TIFF*)(cinfo->client_data)); +} + +static void +OJPEGLibjpegJpegSourceMgrInitSource(jpeg_decompress_struct* cinfo) +{ + (void)cinfo; +} + +static boolean +OJPEGLibjpegJpegSourceMgrFillInputBuffer(jpeg_decompress_struct* cinfo) +{ + TIFF* tif=(TIFF*)cinfo->client_data; + OJPEGState* sp=(OJPEGState*)tif->tif_data; + void* mem=0; + uint32 len=0U; + if (OJPEGWriteStream(tif,&mem,&len)==0) + { + TIFFErrorExt(tif->tif_clientdata,"LibJpeg","Premature end of JPEG data"); + jpeg_encap_unwind(tif); + } + sp->libjpeg_jpeg_source_mgr.bytes_in_buffer=len; + sp->libjpeg_jpeg_source_mgr.next_input_byte=mem; + return(1); +} + +static void +OJPEGLibjpegJpegSourceMgrSkipInputData(jpeg_decompress_struct* cinfo, long num_bytes) +{ + TIFF* tif=(TIFF*)cinfo->client_data; + (void)num_bytes; + TIFFErrorExt(tif->tif_clientdata,"LibJpeg","Unexpected error"); + jpeg_encap_unwind(tif); +} + +static boolean +OJPEGLibjpegJpegSourceMgrResyncToRestart(jpeg_decompress_struct* cinfo, int desired) +{ + TIFF* tif=(TIFF*)cinfo->client_data; + (void)desired; + TIFFErrorExt(tif->tif_clientdata,"LibJpeg","Unexpected error"); + jpeg_encap_unwind(tif); + return(0); +} + +static void +OJPEGLibjpegJpegSourceMgrTermSource(jpeg_decompress_struct* cinfo) +{ + (void)cinfo; +} + +#endif + + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_open.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_open.c new file mode 100644 index 000000000..8c88328cf --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_open.c @@ -0,0 +1,725 @@ +/* $Id: tif_open.c,v 1.46 2010-12-06 16:54:54 faxguy Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + */ +#include "tiffiop.h" + +/* + * Dummy functions to fill the omitted client procedures. + */ +static int +_tiffDummyMapProc(thandle_t fd, void** pbase, toff_t* psize) +{ + (void) fd; (void) pbase; (void) psize; + return (0); +} + +static void +_tiffDummyUnmapProc(thandle_t fd, void* base, toff_t size) +{ + (void) fd; (void) base; (void) size; +} + +int +_TIFFgetMode(const char* mode, const char* module) +{ + int m = -1; + + switch (mode[0]) { + case 'r': + m = O_RDONLY; + if (mode[1] == '+') + m = O_RDWR; + break; + case 'w': + case 'a': + m = O_RDWR|O_CREAT; + if (mode[0] == 'w') + m |= O_TRUNC; + break; + default: + TIFFErrorExt(0, module, "\"%s\": Bad mode", mode); + break; + } + return (m); +} + +TIFF* +TIFFClientOpen( + const char* name, const char* mode, + thandle_t clientdata, + TIFFReadWriteProc readproc, + TIFFReadWriteProc writeproc, + TIFFSeekProc seekproc, + TIFFCloseProc closeproc, + TIFFSizeProc sizeproc, + TIFFMapFileProc mapproc, + TIFFUnmapFileProc unmapproc +) +{ + static const char module[] = "TIFFClientOpen"; + TIFF *tif; + int m; + const char* cp; + + /* The following are configuration checks. They should be redundant, but should not + * compile to any actual code in an optimised release build anyway. If any of them + * fail, (makefile-based or other) configuration is not correct */ + assert(sizeof(uint8)==1); + assert(sizeof(int8)==1); + assert(sizeof(uint16)==2); + assert(sizeof(int16)==2); + assert(sizeof(uint32)==4); + assert(sizeof(int32)==4); + assert(sizeof(uint64)==8); + assert(sizeof(int64)==8); + assert(sizeof(tmsize_t)==sizeof(void*)); + { + union{ + uint8 a8[2]; + uint16 a16; + } n; + n.a8[0]=1; + n.a8[1]=0; + #ifdef WORDS_BIGENDIAN + assert(n.a16==256); + #else + assert(n.a16==1); + #endif + } + + m = _TIFFgetMode(mode, module); + if (m == -1) + goto bad2; + tif = (TIFF *)_TIFFmalloc((tmsize_t)(sizeof (TIFF) + strlen(name) + 1)); + if (tif == NULL) { + TIFFErrorExt(clientdata, module, "%s: Out of memory (TIFF structure)", name); + goto bad2; + } + _TIFFmemset(tif, 0, sizeof (*tif)); + tif->tif_name = (char *)tif + sizeof (TIFF); + strcpy(tif->tif_name, name); + tif->tif_mode = m &~ (O_CREAT|O_TRUNC); + tif->tif_curdir = (uint16) -1; /* non-existent directory */ + tif->tif_curoff = 0; + tif->tif_curstrip = (uint32) -1; /* invalid strip */ + tif->tif_row = (uint32) -1; /* read/write pre-increment */ + tif->tif_clientdata = clientdata; + if (!readproc || !writeproc || !seekproc || !closeproc || !sizeproc) { + TIFFErrorExt(clientdata, module, + "One of the client procedures is NULL pointer."); + goto bad2; + } + tif->tif_readproc = readproc; + tif->tif_writeproc = writeproc; + tif->tif_seekproc = seekproc; + tif->tif_closeproc = closeproc; + tif->tif_sizeproc = sizeproc; + if (mapproc) + tif->tif_mapproc = mapproc; + else + tif->tif_mapproc = _tiffDummyMapProc; + if (unmapproc) + tif->tif_unmapproc = unmapproc; + else + tif->tif_unmapproc = _tiffDummyUnmapProc; + _TIFFSetDefaultCompressionState(tif); /* setup default state */ + /* + * Default is to return data MSB2LSB and enable the + * use of memory-mapped files and strip chopping when + * a file is opened read-only. + */ + tif->tif_flags = FILLORDER_MSB2LSB; + if (m == O_RDONLY ) + tif->tif_flags |= TIFF_MAPPED; + + #ifdef STRIPCHOP_DEFAULT + if (m == O_RDONLY || m == O_RDWR) + tif->tif_flags |= STRIPCHOP_DEFAULT; + #endif + + /* + * Process library-specific flags in the open mode string. + * The following flags may be used to control intrinsic library + * behaviour that may or may not be desirable (usually for + * compatibility with some application that claims to support + * TIFF but only supports some braindead idea of what the + * vendor thinks TIFF is): + * + * 'l' use little-endian byte order for creating a file + * 'b' use big-endian byte order for creating a file + * 'L' read/write information using LSB2MSB bit order + * 'B' read/write information using MSB2LSB bit order + * 'H' read/write information using host bit order + * 'M' enable use of memory-mapped files when supported + * 'm' disable use of memory-mapped files + * 'C' enable strip chopping support when reading + * 'c' disable strip chopping support + * 'h' read TIFF header only, do not load the first IFD + * '4' ClassicTIFF for creating a file (default) + * '8' BigTIFF for creating a file + * + * The use of the 'l' and 'b' flags is strongly discouraged. + * These flags are provided solely because numerous vendors, + * typically on the PC, do not correctly support TIFF; they + * only support the Intel little-endian byte order. This + * support is not configured by default because it supports + * the violation of the TIFF spec that says that readers *MUST* + * support both byte orders. It is strongly recommended that + * you not use this feature except to deal with busted apps + * that write invalid TIFF. And even in those cases you should + * bang on the vendors to fix their software. + * + * The 'L', 'B', and 'H' flags are intended for applications + * that can optimize operations on data by using a particular + * bit order. By default the library returns data in MSB2LSB + * bit order for compatibiltiy with older versions of this + * library. Returning data in the bit order of the native cpu + * makes the most sense but also requires applications to check + * the value of the FillOrder tag; something they probably do + * not do right now. + * + * The 'M' and 'm' flags are provided because some virtual memory + * systems exhibit poor behaviour when large images are mapped. + * These options permit clients to control the use of memory-mapped + * files on a per-file basis. + * + * The 'C' and 'c' flags are provided because the library support + * for chopping up large strips into multiple smaller strips is not + * application-transparent and as such can cause problems. The 'c' + * option permits applications that only want to look at the tags, + * for example, to get the unadulterated TIFF tag information. + */ + for (cp = mode; *cp; cp++) + switch (*cp) { + case 'b': + #ifndef WORDS_BIGENDIAN + if (m&O_CREAT) + tif->tif_flags |= TIFF_SWAB; + #endif + break; + case 'l': + #ifdef WORDS_BIGENDIAN + if ((m&O_CREAT)) + tif->tif_flags |= TIFF_SWAB; + #endif + break; + case 'B': + tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) | + FILLORDER_MSB2LSB; + break; + case 'L': + tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) | + FILLORDER_LSB2MSB; + break; + case 'H': + tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) | + HOST_FILLORDER; + break; + case 'M': + if (m == O_RDONLY) + tif->tif_flags |= TIFF_MAPPED; + break; + case 'm': + if (m == O_RDONLY) + tif->tif_flags &= ~TIFF_MAPPED; + break; + case 'C': + if (m == O_RDONLY) + tif->tif_flags |= TIFF_STRIPCHOP; + break; + case 'c': + if (m == O_RDONLY) + tif->tif_flags &= ~TIFF_STRIPCHOP; + break; + case 'h': + tif->tif_flags |= TIFF_HEADERONLY; + break; + case '8': + if (m&O_CREAT) + tif->tif_flags |= TIFF_BIGTIFF; + break; + } + /* + * Read in TIFF header. + */ + if ((m & O_TRUNC) || + !ReadOK(tif, &tif->tif_header, sizeof (TIFFHeaderClassic))) { + if (tif->tif_mode == O_RDONLY) { + TIFFErrorExt(tif->tif_clientdata, name, + "Cannot read TIFF header"); + goto bad; + } + /* + * Setup header and write. + */ + #ifdef WORDS_BIGENDIAN + tif->tif_header.common.tiff_magic = tif->tif_flags & TIFF_SWAB + ? TIFF_LITTLEENDIAN : TIFF_BIGENDIAN; + #else + tif->tif_header.common.tiff_magic = tif->tif_flags & TIFF_SWAB + ? TIFF_BIGENDIAN : TIFF_LITTLEENDIAN; + #endif + if (!(tif->tif_flags&TIFF_BIGTIFF)) + { + tif->tif_header.common.tiff_version = TIFF_VERSION_CLASSIC; + tif->tif_header.classic.tiff_diroff = 0; + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabShort(&tif->tif_header.common.tiff_version); + tif->tif_header_size = sizeof(TIFFHeaderClassic); + } + else + { + tif->tif_header.common.tiff_version = TIFF_VERSION_BIG; + tif->tif_header.big.tiff_offsetsize = 8; + tif->tif_header.big.tiff_unused = 0; + tif->tif_header.big.tiff_diroff = 0; + if (tif->tif_flags & TIFF_SWAB) + { + TIFFSwabShort(&tif->tif_header.common.tiff_version); + TIFFSwabShort(&tif->tif_header.big.tiff_offsetsize); + } + tif->tif_header_size = sizeof (TIFFHeaderBig); + } + /* + * The doc for "fopen" for some STD_C_LIBs says that if you + * open a file for modify ("+"), then you must fseek (or + * fflush?) between any freads and fwrites. This is not + * necessary on most systems, but has been shown to be needed + * on Solaris. + */ + TIFFSeekFile( tif, 0, SEEK_SET ); + if (!WriteOK(tif, &tif->tif_header, (tmsize_t)(tif->tif_header_size))) { + TIFFErrorExt(tif->tif_clientdata, name, + "Error writing TIFF header"); + goto bad; + } + /* + * Setup the byte order handling. + */ + if (tif->tif_header.common.tiff_magic == TIFF_BIGENDIAN) { + #ifndef WORDS_BIGENDIAN + tif->tif_flags |= TIFF_SWAB; + #endif + } else { + #ifdef WORDS_BIGENDIAN + tif->tif_flags |= TIFF_SWAB; + #endif + } + /* + * Setup default directory. + */ + if (!TIFFDefaultDirectory(tif)) + goto bad; + tif->tif_diroff = 0; + tif->tif_dirlist = NULL; + tif->tif_dirlistsize = 0; + tif->tif_dirnumber = 0; + return (tif); + } + /* + * Setup the byte order handling. + */ + if (tif->tif_header.common.tiff_magic != TIFF_BIGENDIAN && + tif->tif_header.common.tiff_magic != TIFF_LITTLEENDIAN + #if MDI_SUPPORT + && + #if HOST_BIGENDIAN + tif->tif_header.common.tiff_magic != MDI_BIGENDIAN + #else + tif->tif_header.common.tiff_magic != MDI_LITTLEENDIAN + #endif + ) { + TIFFErrorExt(tif->tif_clientdata, name, + "Not a TIFF or MDI file, bad magic number %d (0x%x)", + #else + ) { + TIFFErrorExt(tif->tif_clientdata, name, + "Not a TIFF file, bad magic number %d (0x%x)", + #endif + tif->tif_header.common.tiff_magic, + tif->tif_header.common.tiff_magic); + goto bad; + } + if (tif->tif_header.common.tiff_magic == TIFF_BIGENDIAN) { + #ifndef WORDS_BIGENDIAN + tif->tif_flags |= TIFF_SWAB; + #endif + } else { + #ifdef WORDS_BIGENDIAN + tif->tif_flags |= TIFF_SWAB; + #endif + } + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabShort(&tif->tif_header.common.tiff_version); + if ((tif->tif_header.common.tiff_version != TIFF_VERSION_CLASSIC)&& + (tif->tif_header.common.tiff_version != TIFF_VERSION_BIG)) { + TIFFErrorExt(tif->tif_clientdata, name, + "Not a TIFF file, bad version number %d (0x%x)", + tif->tif_header.common.tiff_version, + tif->tif_header.common.tiff_version); + goto bad; + } + if (tif->tif_header.common.tiff_version == TIFF_VERSION_CLASSIC) + { + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabLong(&tif->tif_header.classic.tiff_diroff); + tif->tif_header_size = sizeof(TIFFHeaderClassic); + } + else + { + if (!ReadOK(tif, ((uint8*)(&tif->tif_header) + sizeof(TIFFHeaderClassic)), (sizeof(TIFFHeaderBig)-sizeof(TIFFHeaderClassic)))) + { + TIFFErrorExt(tif->tif_clientdata, name, + "Cannot read TIFF header"); + goto bad; + } + if (tif->tif_flags & TIFF_SWAB) + { + TIFFSwabShort(&tif->tif_header.big.tiff_offsetsize); + TIFFSwabLong8(&tif->tif_header.big.tiff_diroff); + } + if (tif->tif_header.big.tiff_offsetsize != 8) + { + TIFFErrorExt(tif->tif_clientdata, name, + "Not a TIFF file, bad BigTIFF offsetsize %d (0x%x)", + tif->tif_header.big.tiff_offsetsize, + tif->tif_header.big.tiff_offsetsize); + goto bad; + } + if (tif->tif_header.big.tiff_unused != 0) + { + TIFFErrorExt(tif->tif_clientdata, name, + "Not a TIFF file, bad BigTIFF unused %d (0x%x)", + tif->tif_header.big.tiff_unused, + tif->tif_header.big.tiff_unused); + goto bad; + } + tif->tif_header_size = sizeof(TIFFHeaderBig); + tif->tif_flags |= TIFF_BIGTIFF; + } + tif->tif_flags |= TIFF_MYBUFFER; + tif->tif_rawcp = tif->tif_rawdata = 0; + tif->tif_rawdatasize = 0; + tif->tif_rawdataoff = 0; + tif->tif_rawdataloaded = 0; + + switch (mode[0]) { + case 'r': + if (!(tif->tif_flags&TIFF_BIGTIFF)) + tif->tif_nextdiroff = tif->tif_header.classic.tiff_diroff; + else + tif->tif_nextdiroff = tif->tif_header.big.tiff_diroff; + /* + * Try to use a memory-mapped file if the client + * has not explicitly suppressed usage with the + * 'm' flag in the open mode (see above). + */ + if (tif->tif_flags & TIFF_MAPPED) + { + toff_t n; + if (TIFFMapFileContents(tif,(void**)(&tif->tif_base),&n)) + { + tif->tif_size=(tmsize_t)n; + assert((toff_t)tif->tif_size==n); + } + else + tif->tif_flags &= ~TIFF_MAPPED; + } + /* + * Sometimes we do not want to read the first directory (for example, + * it may be broken) and want to proceed to other directories. I this + * case we use the TIFF_HEADERONLY flag to open file and return + * immediately after reading TIFF header. + */ + if (tif->tif_flags & TIFF_HEADERONLY) + return (tif); + + /* + * Setup initial directory. + */ + if (TIFFReadDirectory(tif)) { + tif->tif_rawcc = (tmsize_t)-1; + tif->tif_flags |= TIFF_BUFFERSETUP; + return (tif); + } + break; + case 'a': + /* + * New directories are automatically append + * to the end of the directory chain when they + * are written out (see TIFFWriteDirectory). + */ + if (!TIFFDefaultDirectory(tif)) + goto bad; + return (tif); + } +bad: + tif->tif_mode = O_RDONLY; /* XXX avoid flush */ + TIFFCleanup(tif); +bad2: + return ((TIFF*)0); +} + +/* + * Query functions to access private data. + */ + +/* + * Return open file's name. + */ +const char * +TIFFFileName(TIFF* tif) +{ + return (tif->tif_name); +} + +/* + * Set the file name. + */ +const char * +TIFFSetFileName(TIFF* tif, const char *name) +{ + const char* old_name = tif->tif_name; + tif->tif_name = (char *)name; + return (old_name); +} + +/* + * Return open file's I/O descriptor. + */ +int +TIFFFileno(TIFF* tif) +{ + return (tif->tif_fd); +} + +/* + * Set open file's I/O descriptor, and return previous value. + */ +int +TIFFSetFileno(TIFF* tif, int fd) +{ + int old_fd = tif->tif_fd; + tif->tif_fd = fd; + return old_fd; +} + +/* + * Return open file's clientdata. + */ +thandle_t +TIFFClientdata(TIFF* tif) +{ + return (tif->tif_clientdata); +} + +/* + * Set open file's clientdata, and return previous value. + */ +thandle_t +TIFFSetClientdata(TIFF* tif, thandle_t newvalue) +{ + thandle_t m = tif->tif_clientdata; + tif->tif_clientdata = newvalue; + return m; +} + +/* + * Return read/write mode. + */ +int +TIFFGetMode(TIFF* tif) +{ + return (tif->tif_mode); +} + +/* + * Return read/write mode. + */ +int +TIFFSetMode(TIFF* tif, int mode) +{ + int old_mode = tif->tif_mode; + tif->tif_mode = mode; + return (old_mode); +} + +/* + * Return nonzero if file is organized in + * tiles; zero if organized as strips. + */ +int +TIFFIsTiled(TIFF* tif) +{ + return (isTiled(tif)); +} + +/* + * Return current row being read/written. + */ +uint32 +TIFFCurrentRow(TIFF* tif) +{ + return (tif->tif_row); +} + +/* + * Return index of the current directory. + */ +uint16 +TIFFCurrentDirectory(TIFF* tif) +{ + return (tif->tif_curdir); +} + +/* + * Return current strip. + */ +uint32 +TIFFCurrentStrip(TIFF* tif) +{ + return (tif->tif_curstrip); +} + +/* + * Return current tile. + */ +uint32 +TIFFCurrentTile(TIFF* tif) +{ + return (tif->tif_curtile); +} + +/* + * Return nonzero if the file has byte-swapped data. + */ +int +TIFFIsByteSwapped(TIFF* tif) +{ + return ((tif->tif_flags & TIFF_SWAB) != 0); +} + +/* + * Return nonzero if the data is returned up-sampled. + */ +int +TIFFIsUpSampled(TIFF* tif) +{ + return (isUpSampled(tif)); +} + +/* + * Return nonzero if the data is returned in MSB-to-LSB bit order. + */ +int +TIFFIsMSB2LSB(TIFF* tif) +{ + return (isFillOrder(tif, FILLORDER_MSB2LSB)); +} + +/* + * Return nonzero if given file was written in big-endian order. + */ +int +TIFFIsBigEndian(TIFF* tif) +{ + return (tif->tif_header.common.tiff_magic == TIFF_BIGENDIAN); +} + +/* + * Return pointer to file read method. + */ +TIFFReadWriteProc +TIFFGetReadProc(TIFF* tif) +{ + return (tif->tif_readproc); +} + +/* + * Return pointer to file write method. + */ +TIFFReadWriteProc +TIFFGetWriteProc(TIFF* tif) +{ + return (tif->tif_writeproc); +} + +/* + * Return pointer to file seek method. + */ +TIFFSeekProc +TIFFGetSeekProc(TIFF* tif) +{ + return (tif->tif_seekproc); +} + +/* + * Return pointer to file close method. + */ +TIFFCloseProc +TIFFGetCloseProc(TIFF* tif) +{ + return (tif->tif_closeproc); +} + +/* + * Return pointer to file size requesting method. + */ +TIFFSizeProc +TIFFGetSizeProc(TIFF* tif) +{ + return (tif->tif_sizeproc); +} + +/* + * Return pointer to memory mapping method. + */ +TIFFMapFileProc +TIFFGetMapFileProc(TIFF* tif) +{ + return (tif->tif_mapproc); +} + +/* + * Return pointer to memory unmapping method. + */ +TIFFUnmapFileProc +TIFFGetUnmapFileProc(TIFF* tif) +{ + return (tif->tif_unmapproc); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_packbits.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_packbits.c new file mode 100644 index 000000000..9e7719013 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_packbits.c @@ -0,0 +1,300 @@ +/* $Id: tif_packbits.c,v 1.22 2012-06-20 05:25:33 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tiffiop.h" +#ifdef PACKBITS_SUPPORT +/* + * TIFF Library. + * + * PackBits Compression Algorithm Support + */ +#include + +static int +PackBitsPreEncode(TIFF* tif, uint16 s) +{ + (void) s; + + if (!(tif->tif_data = (uint8*)_TIFFmalloc(sizeof(tmsize_t)))) + return (0); + /* + * Calculate the scanline/tile-width size in bytes. + */ + if (isTiled(tif)) + *(tmsize_t*)tif->tif_data = TIFFTileRowSize(tif); + else + *(tmsize_t*)tif->tif_data = TIFFScanlineSize(tif); + return (1); +} + +static int +PackBitsPostEncode(TIFF* tif) +{ + if (tif->tif_data) + _TIFFfree(tif->tif_data); + return (1); +} + +/* + * Encode a run of pixels. + */ +static int +PackBitsEncode(TIFF* tif, uint8* buf, tmsize_t cc, uint16 s) +{ + unsigned char* bp = (unsigned char*) buf; + uint8* op; + uint8* ep; + uint8* lastliteral; + long n, slop; + int b; + enum { BASE, LITERAL, RUN, LITERAL_RUN } state; + + (void) s; + op = tif->tif_rawcp; + ep = tif->tif_rawdata + tif->tif_rawdatasize; + state = BASE; + lastliteral = 0; + while (cc > 0) { + /* + * Find the longest string of identical bytes. + */ + b = *bp++, cc--, n = 1; + for (; cc > 0 && b == *bp; cc--, bp++) + n++; + again: + if (op + 2 >= ep) { /* insure space for new data */ + /* + * Be careful about writing the last + * literal. Must write up to that point + * and then copy the remainder to the + * front of the buffer. + */ + if (state == LITERAL || state == LITERAL_RUN) { + slop = (long)(op - lastliteral); + tif->tif_rawcc += (tmsize_t)(lastliteral - tif->tif_rawcp); + if (!TIFFFlushData1(tif)) + return (-1); + op = tif->tif_rawcp; + while (slop-- > 0) + *op++ = *lastliteral++; + lastliteral = tif->tif_rawcp; + } else { + tif->tif_rawcc += (tmsize_t)(op - tif->tif_rawcp); + if (!TIFFFlushData1(tif)) + return (-1); + op = tif->tif_rawcp; + } + } + switch (state) { + case BASE: /* initial state, set run/literal */ + if (n > 1) { + state = RUN; + if (n > 128) { + *op++ = (uint8) -127; + *op++ = (uint8) b; + n -= 128; + goto again; + } + *op++ = (uint8)(-(n-1)); + *op++ = (uint8) b; + } else { + lastliteral = op; + *op++ = 0; + *op++ = (uint8) b; + state = LITERAL; + } + break; + case LITERAL: /* last object was literal string */ + if (n > 1) { + state = LITERAL_RUN; + if (n > 128) { + *op++ = (uint8) -127; + *op++ = (uint8) b; + n -= 128; + goto again; + } + *op++ = (uint8)(-(n-1)); /* encode run */ + *op++ = (uint8) b; + } else { /* extend literal */ + if (++(*lastliteral) == 127) + state = BASE; + *op++ = (uint8) b; + } + break; + case RUN: /* last object was run */ + if (n > 1) { + if (n > 128) { + *op++ = (uint8) -127; + *op++ = (uint8) b; + n -= 128; + goto again; + } + *op++ = (uint8)(-(n-1)); + *op++ = (uint8) b; + } else { + lastliteral = op; + *op++ = 0; + *op++ = (uint8) b; + state = LITERAL; + } + break; + case LITERAL_RUN: /* literal followed by a run */ + /* + * Check to see if previous run should + * be converted to a literal, in which + * case we convert literal-run-literal + * to a single literal. + */ + if (n == 1 && op[-2] == (uint8) -1 && + *lastliteral < 126) { + state = (((*lastliteral) += 2) == 127 ? + BASE : LITERAL); + op[-2] = op[-1]; /* replicate */ + } else + state = RUN; + goto again; + } + } + tif->tif_rawcc += (tmsize_t)(op - tif->tif_rawcp); + tif->tif_rawcp = op; + return (1); +} + +/* + * Encode a rectangular chunk of pixels. We break it up + * into row-sized pieces to insure that encoded runs do + * not span rows. Otherwise, there can be problems with + * the decoder if data is read, for example, by scanlines + * when it was encoded by strips. + */ +static int +PackBitsEncodeChunk(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + tmsize_t rowsize = *(tmsize_t*)tif->tif_data; + + while (cc > 0) { + tmsize_t chunk = rowsize; + + if( cc < chunk ) + chunk = cc; + + if (PackBitsEncode(tif, bp, chunk, s) < 0) + return (-1); + bp += chunk; + cc -= chunk; + } + return (1); +} + +static int +PackBitsDecode(TIFF* tif, uint8* op, tmsize_t occ, uint16 s) +{ + static const char module[] = "PackBitsDecode"; + char *bp; + tmsize_t cc; + long n; + int b; + + (void) s; + bp = (char*) tif->tif_rawcp; + cc = tif->tif_rawcc; + while (cc > 0 && occ > 0) { + n = (long) *bp++, cc--; + /* + * Watch out for compilers that + * don't sign extend chars... + */ + if (n >= 128) + n -= 256; + if (n < 0) { /* replicate next byte -n+1 times */ + if (n == -128) /* nop */ + continue; + n = -n + 1; + if( occ < (tmsize_t)n ) + { + TIFFWarningExt(tif->tif_clientdata, module, + "Discarding %lu bytes to avoid buffer overrun", + (unsigned long) ((tmsize_t)n - occ)); + n = (long)occ; + } + occ -= n; + b = *bp++, cc--; + while (n-- > 0) + *op++ = (uint8) b; + } else { /* copy next n+1 bytes literally */ + if (occ < (tmsize_t)(n + 1)) + { + TIFFWarningExt(tif->tif_clientdata, module, + "Discarding %lu bytes to avoid buffer overrun", + (unsigned long) ((tmsize_t)n - occ + 1)); + n = (long)occ - 1; + } + if (cc < (tmsize_t) (n+1)) + { + TIFFWarningExt(tif->tif_clientdata, module, + "Terminating PackBitsDecode due to lack of data."); + break; + } + _TIFFmemcpy(op, bp, ++n); + op += n; occ -= n; + bp += n; cc -= n; + } + } + tif->tif_rawcp = (uint8*) bp; + tif->tif_rawcc = cc; + if (occ > 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data for scanline %lu", + (unsigned long) tif->tif_row); + return (0); + } + return (1); +} + +int +TIFFInitPackBits(TIFF* tif, int scheme) +{ + (void) scheme; + tif->tif_decoderow = PackBitsDecode; + tif->tif_decodestrip = PackBitsDecode; + tif->tif_decodetile = PackBitsDecode; + tif->tif_preencode = PackBitsPreEncode; + tif->tif_postencode = PackBitsPostEncode; + tif->tif_encoderow = PackBitsEncode; + tif->tif_encodestrip = PackBitsEncodeChunk; + tif->tif_encodetile = PackBitsEncodeChunk; + return (1); +} +#endif /* PACKBITS_SUPPORT */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_pixarlog.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_pixarlog.c new file mode 100644 index 000000000..e58311704 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_pixarlog.c @@ -0,0 +1,1426 @@ +/* $Id: tif_pixarlog.c,v 1.38 2012-06-21 01:01:53 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1996-1997 Sam Leffler + * Copyright (c) 1996 Pixar + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Pixar, Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Pixar, Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL PIXAR, SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tiffiop.h" +#ifdef PIXARLOG_SUPPORT + +/* + * TIFF Library. + * PixarLog Compression Support + * + * Contributed by Dan McCoy. + * + * PixarLog film support uses the TIFF library to store companded + * 11 bit values into a tiff file, which are compressed using the + * zip compressor. + * + * The codec can take as input and produce as output 32-bit IEEE float values + * as well as 16-bit or 8-bit unsigned integer values. + * + * On writing any of the above are converted into the internal + * 11-bit log format. In the case of 8 and 16 bit values, the + * input is assumed to be unsigned linear color values that represent + * the range 0-1. In the case of IEEE values, the 0-1 range is assumed to + * be the normal linear color range, in addition over 1 values are + * accepted up to a value of about 25.0 to encode "hot" hightlights and such. + * The encoding is lossless for 8-bit values, slightly lossy for the + * other bit depths. The actual color precision should be better + * than the human eye can perceive with extra room to allow for + * error introduced by further image computation. As with any quantized + * color format, it is possible to perform image calculations which + * expose the quantization error. This format should certainly be less + * susceptable to such errors than standard 8-bit encodings, but more + * susceptable than straight 16-bit or 32-bit encodings. + * + * On reading the internal format is converted to the desired output format. + * The program can request which format it desires by setting the internal + * pseudo tag TIFFTAG_PIXARLOGDATAFMT to one of these possible values: + * PIXARLOGDATAFMT_FLOAT = provide IEEE float values. + * PIXARLOGDATAFMT_16BIT = provide unsigned 16-bit integer values + * PIXARLOGDATAFMT_8BIT = provide unsigned 8-bit integer values + * + * alternately PIXARLOGDATAFMT_8BITABGR provides unsigned 8-bit integer + * values with the difference that if there are exactly three or four channels + * (rgb or rgba) it swaps the channel order (bgr or abgr). + * + * PIXARLOGDATAFMT_11BITLOG provides the internal encoding directly + * packed in 16-bit values. However no tools are supplied for interpreting + * these values. + * + * "hot" (over 1.0) areas written in floating point get clamped to + * 1.0 in the integer data types. + * + * When the file is closed after writing, the bit depth and sample format + * are set always to appear as if 8-bit data has been written into it. + * That way a naive program unaware of the particulars of the encoding + * gets the format it is most likely able to handle. + * + * The codec does it's own horizontal differencing step on the coded + * values so the libraries predictor stuff should be turned off. + * The codec also handle byte swapping the encoded values as necessary + * since the library does not have the information necessary + * to know the bit depth of the raw unencoded buffer. + * + * NOTE: This decoder does not appear to update tif_rawcp, and tif_rawcc. + * This can cause problems with the implementation of CHUNKY_STRIP_READ_SUPPORT + * as noted in http://trac.osgeo.org/gdal/ticket/3894. FrankW - Jan'11 + */ + +#include "tif_predict.h" +#include "zlib.h" + +#include +#include +#include + +/* Tables for converting to/from 11 bit coded values */ + +#define TSIZE 2048 /* decode table size (11-bit tokens) */ +#define TSIZEP1 2049 /* Plus one for slop */ +#define ONE 1250 /* token value of 1.0 exactly */ +#define RATIO 1.004 /* nominal ratio for log part */ + +#define CODE_MASK 0x7ff /* 11 bits. */ + +static float Fltsize; +static float LogK1, LogK2; + +#define REPEAT(n, op) { int i; i=n; do { i--; op; } while (i>0); } + +static void +horizontalAccumulateF(uint16 *wp, int n, int stride, float *op, + float *ToLinearF) +{ + register unsigned int cr, cg, cb, ca, mask; + register float t0, t1, t2, t3; + + if (n >= stride) { + mask = CODE_MASK; + if (stride == 3) { + t0 = ToLinearF[cr = (wp[0] & mask)]; + t1 = ToLinearF[cg = (wp[1] & mask)]; + t2 = ToLinearF[cb = (wp[2] & mask)]; + op[0] = t0; + op[1] = t1; + op[2] = t2; + n -= 3; + while (n > 0) { + wp += 3; + op += 3; + n -= 3; + t0 = ToLinearF[(cr += wp[0]) & mask]; + t1 = ToLinearF[(cg += wp[1]) & mask]; + t2 = ToLinearF[(cb += wp[2]) & mask]; + op[0] = t0; + op[1] = t1; + op[2] = t2; + } + } else if (stride == 4) { + t0 = ToLinearF[cr = (wp[0] & mask)]; + t1 = ToLinearF[cg = (wp[1] & mask)]; + t2 = ToLinearF[cb = (wp[2] & mask)]; + t3 = ToLinearF[ca = (wp[3] & mask)]; + op[0] = t0; + op[1] = t1; + op[2] = t2; + op[3] = t3; + n -= 4; + while (n > 0) { + wp += 4; + op += 4; + n -= 4; + t0 = ToLinearF[(cr += wp[0]) & mask]; + t1 = ToLinearF[(cg += wp[1]) & mask]; + t2 = ToLinearF[(cb += wp[2]) & mask]; + t3 = ToLinearF[(ca += wp[3]) & mask]; + op[0] = t0; + op[1] = t1; + op[2] = t2; + op[3] = t3; + } + } else { + REPEAT(stride, *op = ToLinearF[*wp&mask]; wp++; op++) + n -= stride; + while (n > 0) { + REPEAT(stride, + wp[stride] += *wp; *op = ToLinearF[*wp&mask]; wp++; op++) + n -= stride; + } + } + } +} + +static void +horizontalAccumulate12(uint16 *wp, int n, int stride, int16 *op, + float *ToLinearF) +{ + register unsigned int cr, cg, cb, ca, mask; + register float t0, t1, t2, t3; + +#define SCALE12 2048.0F +#define CLAMP12(t) (((t) < 3071) ? (uint16) (t) : 3071) + + if (n >= stride) { + mask = CODE_MASK; + if (stride == 3) { + t0 = ToLinearF[cr = (wp[0] & mask)] * SCALE12; + t1 = ToLinearF[cg = (wp[1] & mask)] * SCALE12; + t2 = ToLinearF[cb = (wp[2] & mask)] * SCALE12; + op[0] = CLAMP12(t0); + op[1] = CLAMP12(t1); + op[2] = CLAMP12(t2); + n -= 3; + while (n > 0) { + wp += 3; + op += 3; + n -= 3; + t0 = ToLinearF[(cr += wp[0]) & mask] * SCALE12; + t1 = ToLinearF[(cg += wp[1]) & mask] * SCALE12; + t2 = ToLinearF[(cb += wp[2]) & mask] * SCALE12; + op[0] = CLAMP12(t0); + op[1] = CLAMP12(t1); + op[2] = CLAMP12(t2); + } + } else if (stride == 4) { + t0 = ToLinearF[cr = (wp[0] & mask)] * SCALE12; + t1 = ToLinearF[cg = (wp[1] & mask)] * SCALE12; + t2 = ToLinearF[cb = (wp[2] & mask)] * SCALE12; + t3 = ToLinearF[ca = (wp[3] & mask)] * SCALE12; + op[0] = CLAMP12(t0); + op[1] = CLAMP12(t1); + op[2] = CLAMP12(t2); + op[3] = CLAMP12(t3); + n -= 4; + while (n > 0) { + wp += 4; + op += 4; + n -= 4; + t0 = ToLinearF[(cr += wp[0]) & mask] * SCALE12; + t1 = ToLinearF[(cg += wp[1]) & mask] * SCALE12; + t2 = ToLinearF[(cb += wp[2]) & mask] * SCALE12; + t3 = ToLinearF[(ca += wp[3]) & mask] * SCALE12; + op[0] = CLAMP12(t0); + op[1] = CLAMP12(t1); + op[2] = CLAMP12(t2); + op[3] = CLAMP12(t3); + } + } else { + REPEAT(stride, t0 = ToLinearF[*wp&mask] * SCALE12; + *op = CLAMP12(t0); wp++; op++) + n -= stride; + while (n > 0) { + REPEAT(stride, + wp[stride] += *wp; t0 = ToLinearF[wp[stride]&mask]*SCALE12; + *op = CLAMP12(t0); wp++; op++) + n -= stride; + } + } + } +} + +static void +horizontalAccumulate16(uint16 *wp, int n, int stride, uint16 *op, + uint16 *ToLinear16) +{ + register unsigned int cr, cg, cb, ca, mask; + + if (n >= stride) { + mask = CODE_MASK; + if (stride == 3) { + op[0] = ToLinear16[cr = (wp[0] & mask)]; + op[1] = ToLinear16[cg = (wp[1] & mask)]; + op[2] = ToLinear16[cb = (wp[2] & mask)]; + n -= 3; + while (n > 0) { + wp += 3; + op += 3; + n -= 3; + op[0] = ToLinear16[(cr += wp[0]) & mask]; + op[1] = ToLinear16[(cg += wp[1]) & mask]; + op[2] = ToLinear16[(cb += wp[2]) & mask]; + } + } else if (stride == 4) { + op[0] = ToLinear16[cr = (wp[0] & mask)]; + op[1] = ToLinear16[cg = (wp[1] & mask)]; + op[2] = ToLinear16[cb = (wp[2] & mask)]; + op[3] = ToLinear16[ca = (wp[3] & mask)]; + n -= 4; + while (n > 0) { + wp += 4; + op += 4; + n -= 4; + op[0] = ToLinear16[(cr += wp[0]) & mask]; + op[1] = ToLinear16[(cg += wp[1]) & mask]; + op[2] = ToLinear16[(cb += wp[2]) & mask]; + op[3] = ToLinear16[(ca += wp[3]) & mask]; + } + } else { + REPEAT(stride, *op = ToLinear16[*wp&mask]; wp++; op++) + n -= stride; + while (n > 0) { + REPEAT(stride, + wp[stride] += *wp; *op = ToLinear16[*wp&mask]; wp++; op++) + n -= stride; + } + } + } +} + +/* + * Returns the log encoded 11-bit values with the horizontal + * differencing undone. + */ +static void +horizontalAccumulate11(uint16 *wp, int n, int stride, uint16 *op) +{ + register unsigned int cr, cg, cb, ca, mask; + + if (n >= stride) { + mask = CODE_MASK; + if (stride == 3) { + op[0] = cr = wp[0]; op[1] = cg = wp[1]; op[2] = cb = wp[2]; + n -= 3; + while (n > 0) { + wp += 3; + op += 3; + n -= 3; + op[0] = (cr += wp[0]) & mask; + op[1] = (cg += wp[1]) & mask; + op[2] = (cb += wp[2]) & mask; + } + } else if (stride == 4) { + op[0] = cr = wp[0]; op[1] = cg = wp[1]; + op[2] = cb = wp[2]; op[3] = ca = wp[3]; + n -= 4; + while (n > 0) { + wp += 4; + op += 4; + n -= 4; + op[0] = (cr += wp[0]) & mask; + op[1] = (cg += wp[1]) & mask; + op[2] = (cb += wp[2]) & mask; + op[3] = (ca += wp[3]) & mask; + } + } else { + REPEAT(stride, *op = *wp&mask; wp++; op++) + n -= stride; + while (n > 0) { + REPEAT(stride, + wp[stride] += *wp; *op = *wp&mask; wp++; op++) + n -= stride; + } + } + } +} + +static void +horizontalAccumulate8(uint16 *wp, int n, int stride, unsigned char *op, + unsigned char *ToLinear8) +{ + register unsigned int cr, cg, cb, ca, mask; + + if (n >= stride) { + mask = CODE_MASK; + if (stride == 3) { + op[0] = ToLinear8[cr = (wp[0] & mask)]; + op[1] = ToLinear8[cg = (wp[1] & mask)]; + op[2] = ToLinear8[cb = (wp[2] & mask)]; + n -= 3; + while (n > 0) { + n -= 3; + wp += 3; + op += 3; + op[0] = ToLinear8[(cr += wp[0]) & mask]; + op[1] = ToLinear8[(cg += wp[1]) & mask]; + op[2] = ToLinear8[(cb += wp[2]) & mask]; + } + } else if (stride == 4) { + op[0] = ToLinear8[cr = (wp[0] & mask)]; + op[1] = ToLinear8[cg = (wp[1] & mask)]; + op[2] = ToLinear8[cb = (wp[2] & mask)]; + op[3] = ToLinear8[ca = (wp[3] & mask)]; + n -= 4; + while (n > 0) { + n -= 4; + wp += 4; + op += 4; + op[0] = ToLinear8[(cr += wp[0]) & mask]; + op[1] = ToLinear8[(cg += wp[1]) & mask]; + op[2] = ToLinear8[(cb += wp[2]) & mask]; + op[3] = ToLinear8[(ca += wp[3]) & mask]; + } + } else { + REPEAT(stride, *op = ToLinear8[*wp&mask]; wp++; op++) + n -= stride; + while (n > 0) { + REPEAT(stride, + wp[stride] += *wp; *op = ToLinear8[*wp&mask]; wp++; op++) + n -= stride; + } + } + } +} + + +static void +horizontalAccumulate8abgr(uint16 *wp, int n, int stride, unsigned char *op, + unsigned char *ToLinear8) +{ + register unsigned int cr, cg, cb, ca, mask; + register unsigned char t0, t1, t2, t3; + + if (n >= stride) { + mask = CODE_MASK; + if (stride == 3) { + op[0] = 0; + t1 = ToLinear8[cb = (wp[2] & mask)]; + t2 = ToLinear8[cg = (wp[1] & mask)]; + t3 = ToLinear8[cr = (wp[0] & mask)]; + op[1] = t1; + op[2] = t2; + op[3] = t3; + n -= 3; + while (n > 0) { + n -= 3; + wp += 3; + op += 4; + op[0] = 0; + t1 = ToLinear8[(cb += wp[2]) & mask]; + t2 = ToLinear8[(cg += wp[1]) & mask]; + t3 = ToLinear8[(cr += wp[0]) & mask]; + op[1] = t1; + op[2] = t2; + op[3] = t3; + } + } else if (stride == 4) { + t0 = ToLinear8[ca = (wp[3] & mask)]; + t1 = ToLinear8[cb = (wp[2] & mask)]; + t2 = ToLinear8[cg = (wp[1] & mask)]; + t3 = ToLinear8[cr = (wp[0] & mask)]; + op[0] = t0; + op[1] = t1; + op[2] = t2; + op[3] = t3; + n -= 4; + while (n > 0) { + n -= 4; + wp += 4; + op += 4; + t0 = ToLinear8[(ca += wp[3]) & mask]; + t1 = ToLinear8[(cb += wp[2]) & mask]; + t2 = ToLinear8[(cg += wp[1]) & mask]; + t3 = ToLinear8[(cr += wp[0]) & mask]; + op[0] = t0; + op[1] = t1; + op[2] = t2; + op[3] = t3; + } + } else { + REPEAT(stride, *op = ToLinear8[*wp&mask]; wp++; op++) + n -= stride; + while (n > 0) { + REPEAT(stride, + wp[stride] += *wp; *op = ToLinear8[*wp&mask]; wp++; op++) + n -= stride; + } + } + } +} + +/* + * State block for each open TIFF + * file using PixarLog compression/decompression. + */ +typedef struct { + TIFFPredictorState predict; + z_stream stream; + uint16 *tbuf; + uint16 stride; + int state; + int user_datafmt; + int quality; +#define PLSTATE_INIT 1 + + TIFFVSetMethod vgetparent; /* super-class method */ + TIFFVSetMethod vsetparent; /* super-class method */ + + float *ToLinearF; + uint16 *ToLinear16; + unsigned char *ToLinear8; + uint16 *FromLT2; + uint16 *From14; /* Really for 16-bit data, but we shift down 2 */ + uint16 *From8; + +} PixarLogState; + +static int +PixarLogMakeTables(PixarLogState *sp) +{ + +/* + * We make several tables here to convert between various external + * representations (float, 16-bit, and 8-bit) and the internal + * 11-bit companded representation. The 11-bit representation has two + * distinct regions. A linear bottom end up through .018316 in steps + * of about .000073, and a region of constant ratio up to about 25. + * These floating point numbers are stored in the main table ToLinearF. + * All other tables are derived from this one. The tables (and the + * ratios) are continuous at the internal seam. + */ + + int nlin, lt2size; + int i, j; + double b, c, linstep, v; + float *ToLinearF; + uint16 *ToLinear16; + unsigned char *ToLinear8; + uint16 *FromLT2; + uint16 *From14; /* Really for 16-bit data, but we shift down 2 */ + uint16 *From8; + + c = log(RATIO); + nlin = (int)(1./c); /* nlin must be an integer */ + c = 1./nlin; + b = exp(-c*ONE); /* multiplicative scale factor [b*exp(c*ONE) = 1] */ + linstep = b*c*exp(1.); + + LogK1 = (float)(1./c); /* if (v >= 2) token = k1*log(v*k2) */ + LogK2 = (float)(1./b); + lt2size = (int)(2./linstep) + 1; + FromLT2 = (uint16 *)_TIFFmalloc(lt2size*sizeof(uint16)); + From14 = (uint16 *)_TIFFmalloc(16384*sizeof(uint16)); + From8 = (uint16 *)_TIFFmalloc(256*sizeof(uint16)); + ToLinearF = (float *)_TIFFmalloc(TSIZEP1 * sizeof(float)); + ToLinear16 = (uint16 *)_TIFFmalloc(TSIZEP1 * sizeof(uint16)); + ToLinear8 = (unsigned char *)_TIFFmalloc(TSIZEP1 * sizeof(unsigned char)); + if (FromLT2 == NULL || From14 == NULL || From8 == NULL || + ToLinearF == NULL || ToLinear16 == NULL || ToLinear8 == NULL) { + if (FromLT2) _TIFFfree(FromLT2); + if (From14) _TIFFfree(From14); + if (From8) _TIFFfree(From8); + if (ToLinearF) _TIFFfree(ToLinearF); + if (ToLinear16) _TIFFfree(ToLinear16); + if (ToLinear8) _TIFFfree(ToLinear8); + sp->FromLT2 = NULL; + sp->From14 = NULL; + sp->From8 = NULL; + sp->ToLinearF = NULL; + sp->ToLinear16 = NULL; + sp->ToLinear8 = NULL; + return 0; + } + + j = 0; + + for (i = 0; i < nlin; i++) { + v = i * linstep; + ToLinearF[j++] = (float)v; + } + + for (i = nlin; i < TSIZE; i++) + ToLinearF[j++] = (float)(b*exp(c*i)); + + ToLinearF[2048] = ToLinearF[2047]; + + for (i = 0; i < TSIZEP1; i++) { + v = ToLinearF[i]*65535.0 + 0.5; + ToLinear16[i] = (v > 65535.0) ? 65535 : (uint16)v; + v = ToLinearF[i]*255.0 + 0.5; + ToLinear8[i] = (v > 255.0) ? 255 : (unsigned char)v; + } + + j = 0; + for (i = 0; i < lt2size; i++) { + if ((i*linstep)*(i*linstep) > ToLinearF[j]*ToLinearF[j+1]) + j++; + FromLT2[i] = j; + } + + /* + * Since we lose info anyway on 16-bit data, we set up a 14-bit + * table and shift 16-bit values down two bits on input. + * saves a little table space. + */ + j = 0; + for (i = 0; i < 16384; i++) { + while ((i/16383.)*(i/16383.) > ToLinearF[j]*ToLinearF[j+1]) + j++; + From14[i] = j; + } + + j = 0; + for (i = 0; i < 256; i++) { + while ((i/255.)*(i/255.) > ToLinearF[j]*ToLinearF[j+1]) + j++; + From8[i] = j; + } + + Fltsize = (float)(lt2size/2); + + sp->ToLinearF = ToLinearF; + sp->ToLinear16 = ToLinear16; + sp->ToLinear8 = ToLinear8; + sp->FromLT2 = FromLT2; + sp->From14 = From14; + sp->From8 = From8; + + return 1; +} + +#define DecoderState(tif) ((PixarLogState*) (tif)->tif_data) +#define EncoderState(tif) ((PixarLogState*) (tif)->tif_data) + +static int PixarLogEncode(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s); +static int PixarLogDecode(TIFF* tif, uint8* op, tmsize_t occ, uint16 s); + +#define PIXARLOGDATAFMT_UNKNOWN -1 + +static int +PixarLogGuessDataFmt(TIFFDirectory *td) +{ + int guess = PIXARLOGDATAFMT_UNKNOWN; + int format = td->td_sampleformat; + + /* If the user didn't tell us his datafmt, + * take our best guess from the bitspersample. + */ + switch (td->td_bitspersample) { + case 32: + if (format == SAMPLEFORMAT_IEEEFP) + guess = PIXARLOGDATAFMT_FLOAT; + break; + case 16: + if (format == SAMPLEFORMAT_VOID || format == SAMPLEFORMAT_UINT) + guess = PIXARLOGDATAFMT_16BIT; + break; + case 12: + if (format == SAMPLEFORMAT_VOID || format == SAMPLEFORMAT_INT) + guess = PIXARLOGDATAFMT_12BITPICIO; + break; + case 11: + if (format == SAMPLEFORMAT_VOID || format == SAMPLEFORMAT_UINT) + guess = PIXARLOGDATAFMT_11BITLOG; + break; + case 8: + if (format == SAMPLEFORMAT_VOID || format == SAMPLEFORMAT_UINT) + guess = PIXARLOGDATAFMT_8BIT; + break; + } + + return guess; +} + +static tmsize_t +multiply_ms(tmsize_t m1, tmsize_t m2) +{ + tmsize_t bytes = m1 * m2; + + if (m1 && bytes / m1 != m2) + bytes = 0; + + return bytes; +} + +static int +PixarLogFixupTags(TIFF* tif) +{ + (void) tif; + return (1); +} + +static int +PixarLogSetupDecode(TIFF* tif) +{ + static const char module[] = "PixarLogSetupDecode"; + TIFFDirectory *td = &tif->tif_dir; + PixarLogState* sp = DecoderState(tif); + tmsize_t tbuf_size; + + assert(sp != NULL); + + /* Make sure no byte swapping happens on the data + * after decompression. */ + tif->tif_postdecode = _TIFFNoPostDecode; + + /* for some reason, we can't do this in TIFFInitPixarLog */ + + sp->stride = (td->td_planarconfig == PLANARCONFIG_CONTIG ? + td->td_samplesperpixel : 1); + tbuf_size = multiply_ms(multiply_ms(multiply_ms(sp->stride, td->td_imagewidth), + td->td_rowsperstrip), sizeof(uint16)); + if (tbuf_size == 0) + return (0); /* TODO: this is an error return without error report through TIFFErrorExt */ + sp->tbuf = (uint16 *) _TIFFmalloc(tbuf_size+sizeof(uint16)*sp->stride); + if (sp->tbuf == NULL) + return (0); + if (sp->user_datafmt == PIXARLOGDATAFMT_UNKNOWN) + sp->user_datafmt = PixarLogGuessDataFmt(td); + if (sp->user_datafmt == PIXARLOGDATAFMT_UNKNOWN) { + TIFFErrorExt(tif->tif_clientdata, module, + "PixarLog compression can't handle bits depth/data format combination (depth: %d)", + td->td_bitspersample); + return (0); + } + + if (inflateInit(&sp->stream) != Z_OK) { + TIFFErrorExt(tif->tif_clientdata, module, "%s", sp->stream.msg); + return (0); + } else { + sp->state |= PLSTATE_INIT; + return (1); + } +} + +/* + * Setup state for decoding a strip. + */ +static int +PixarLogPreDecode(TIFF* tif, uint16 s) +{ + static const char module[] = "PixarLogPreDecode"; + PixarLogState* sp = DecoderState(tif); + + (void) s; + assert(sp != NULL); + sp->stream.next_in = tif->tif_rawdata; + assert(sizeof(sp->stream.avail_in)==4); /* if this assert gets raised, + we need to simplify this code to reflect a ZLib that is likely updated + to deal with 8byte memory sizes, though this code will respond + apropriately even before we simplify it */ + sp->stream.avail_in = (uInt) tif->tif_rawcc; + if ((tmsize_t)sp->stream.avail_in != tif->tif_rawcc) + { + TIFFErrorExt(tif->tif_clientdata, module, "ZLib cannot deal with buffers this size"); + return (0); + } + return (inflateReset(&sp->stream) == Z_OK); +} + +static int +PixarLogDecode(TIFF* tif, uint8* op, tmsize_t occ, uint16 s) +{ + static const char module[] = "PixarLogDecode"; + TIFFDirectory *td = &tif->tif_dir; + PixarLogState* sp = DecoderState(tif); + tmsize_t i; + tmsize_t nsamples; + int llen; + uint16 *up; + + switch (sp->user_datafmt) { + case PIXARLOGDATAFMT_FLOAT: + nsamples = occ / sizeof(float); /* XXX float == 32 bits */ + break; + case PIXARLOGDATAFMT_16BIT: + case PIXARLOGDATAFMT_12BITPICIO: + case PIXARLOGDATAFMT_11BITLOG: + nsamples = occ / sizeof(uint16); /* XXX uint16 == 16 bits */ + break; + case PIXARLOGDATAFMT_8BIT: + case PIXARLOGDATAFMT_8BITABGR: + nsamples = occ; + break; + default: + TIFFErrorExt(tif->tif_clientdata, module, + "%d bit input not supported in PixarLog", + td->td_bitspersample); + return 0; + } + + llen = sp->stride * td->td_imagewidth; + + (void) s; + assert(sp != NULL); + sp->stream.next_out = (unsigned char *) sp->tbuf; + assert(sizeof(sp->stream.avail_out)==4); /* if this assert gets raised, + we need to simplify this code to reflect a ZLib that is likely updated + to deal with 8byte memory sizes, though this code will respond + apropriately even before we simplify it */ + sp->stream.avail_out = (uInt) (nsamples * sizeof(uint16)); + if (sp->stream.avail_out != nsamples * sizeof(uint16)) + { + TIFFErrorExt(tif->tif_clientdata, module, "ZLib cannot deal with buffers this size"); + return (0); + } + do { + int state = inflate(&sp->stream, Z_PARTIAL_FLUSH); + if (state == Z_STREAM_END) { + break; /* XXX */ + } + if (state == Z_DATA_ERROR) { + TIFFErrorExt(tif->tif_clientdata, module, + "Decoding error at scanline %lu, %s", + (unsigned long) tif->tif_row, sp->stream.msg); + if (inflateSync(&sp->stream) != Z_OK) + return (0); + continue; + } + if (state != Z_OK) { + TIFFErrorExt(tif->tif_clientdata, module, "ZLib error: %s", + sp->stream.msg); + return (0); + } + } while (sp->stream.avail_out > 0); + + /* hopefully, we got all the bytes we needed */ + if (sp->stream.avail_out != 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at scanline %lu (short " TIFF_UINT64_FORMAT " bytes)", + (unsigned long) tif->tif_row, (TIFF_UINT64_T) sp->stream.avail_out); + return (0); + } + + up = sp->tbuf; + /* Swap bytes in the data if from a different endian machine. */ + if (tif->tif_flags & TIFF_SWAB) + TIFFSwabArrayOfShort(up, nsamples); + + /* + * if llen is not an exact multiple of nsamples, the decode operation + * may overflow the output buffer, so truncate it enough to prevent + * that but still salvage as much data as possible. + */ + if (nsamples % llen) { + TIFFWarningExt(tif->tif_clientdata, module, + "stride %lu is not a multiple of sample count, " + "%lu, data truncated.", (unsigned long) llen, (unsigned long) nsamples); + nsamples -= nsamples % llen; + } + + for (i = 0; i < nsamples; i += llen, up += llen) { + switch (sp->user_datafmt) { + case PIXARLOGDATAFMT_FLOAT: + horizontalAccumulateF(up, llen, sp->stride, + (float *)op, sp->ToLinearF); + op += llen * sizeof(float); + break; + case PIXARLOGDATAFMT_16BIT: + horizontalAccumulate16(up, llen, sp->stride, + (uint16 *)op, sp->ToLinear16); + op += llen * sizeof(uint16); + break; + case PIXARLOGDATAFMT_12BITPICIO: + horizontalAccumulate12(up, llen, sp->stride, + (int16 *)op, sp->ToLinearF); + op += llen * sizeof(int16); + break; + case PIXARLOGDATAFMT_11BITLOG: + horizontalAccumulate11(up, llen, sp->stride, + (uint16 *)op); + op += llen * sizeof(uint16); + break; + case PIXARLOGDATAFMT_8BIT: + horizontalAccumulate8(up, llen, sp->stride, + (unsigned char *)op, sp->ToLinear8); + op += llen * sizeof(unsigned char); + break; + case PIXARLOGDATAFMT_8BITABGR: + horizontalAccumulate8abgr(up, llen, sp->stride, + (unsigned char *)op, sp->ToLinear8); + op += llen * sizeof(unsigned char); + break; + default: + TIFFErrorExt(tif->tif_clientdata, module, + "Unsupported bits/sample: %d", + td->td_bitspersample); + return (0); + } + } + + return (1); +} + +static int +PixarLogSetupEncode(TIFF* tif) +{ + static const char module[] = "PixarLogSetupEncode"; + TIFFDirectory *td = &tif->tif_dir; + PixarLogState* sp = EncoderState(tif); + tmsize_t tbuf_size; + + assert(sp != NULL); + + /* for some reason, we can't do this in TIFFInitPixarLog */ + + sp->stride = (td->td_planarconfig == PLANARCONFIG_CONTIG ? + td->td_samplesperpixel : 1); + tbuf_size = multiply_ms(multiply_ms(multiply_ms(sp->stride, td->td_imagewidth), + td->td_rowsperstrip), sizeof(uint16)); + if (tbuf_size == 0) + return (0); /* TODO: this is an error return without error report through TIFFErrorExt */ + sp->tbuf = (uint16 *) _TIFFmalloc(tbuf_size); + if (sp->tbuf == NULL) + return (0); + if (sp->user_datafmt == PIXARLOGDATAFMT_UNKNOWN) + sp->user_datafmt = PixarLogGuessDataFmt(td); + if (sp->user_datafmt == PIXARLOGDATAFMT_UNKNOWN) { + TIFFErrorExt(tif->tif_clientdata, module, "PixarLog compression can't handle %d bit linear encodings", td->td_bitspersample); + return (0); + } + + if (deflateInit(&sp->stream, sp->quality) != Z_OK) { + TIFFErrorExt(tif->tif_clientdata, module, "%s", sp->stream.msg); + return (0); + } else { + sp->state |= PLSTATE_INIT; + return (1); + } +} + +/* + * Reset encoding state at the start of a strip. + */ +static int +PixarLogPreEncode(TIFF* tif, uint16 s) +{ + static const char module[] = "PixarLogPreEncode"; + PixarLogState *sp = EncoderState(tif); + + (void) s; + assert(sp != NULL); + sp->stream.next_out = tif->tif_rawdata; + assert(sizeof(sp->stream.avail_out)==4); /* if this assert gets raised, + we need to simplify this code to reflect a ZLib that is likely updated + to deal with 8byte memory sizes, though this code will respond + apropriately even before we simplify it */ + sp->stream.avail_out = tif->tif_rawdatasize; + if ((tmsize_t)sp->stream.avail_out != tif->tif_rawdatasize) + { + TIFFErrorExt(tif->tif_clientdata, module, "ZLib cannot deal with buffers this size"); + return (0); + } + return (deflateReset(&sp->stream) == Z_OK); +} + +static void +horizontalDifferenceF(float *ip, int n, int stride, uint16 *wp, uint16 *FromLT2) +{ + int32 r1, g1, b1, a1, r2, g2, b2, a2, mask; + float fltsize = Fltsize; + +#define CLAMP(v) ( (v<(float)0.) ? 0 \ + : (v<(float)2.) ? FromLT2[(int)(v*fltsize)] \ + : (v>(float)24.2) ? 2047 \ + : LogK1*log(v*LogK2) + 0.5 ) + + mask = CODE_MASK; + if (n >= stride) { + if (stride == 3) { + r2 = wp[0] = (uint16) CLAMP(ip[0]); + g2 = wp[1] = (uint16) CLAMP(ip[1]); + b2 = wp[2] = (uint16) CLAMP(ip[2]); + n -= 3; + while (n > 0) { + n -= 3; + wp += 3; + ip += 3; + r1 = (int32) CLAMP(ip[0]); wp[0] = (r1-r2) & mask; r2 = r1; + g1 = (int32) CLAMP(ip[1]); wp[1] = (g1-g2) & mask; g2 = g1; + b1 = (int32) CLAMP(ip[2]); wp[2] = (b1-b2) & mask; b2 = b1; + } + } else if (stride == 4) { + r2 = wp[0] = (uint16) CLAMP(ip[0]); + g2 = wp[1] = (uint16) CLAMP(ip[1]); + b2 = wp[2] = (uint16) CLAMP(ip[2]); + a2 = wp[3] = (uint16) CLAMP(ip[3]); + n -= 4; + while (n > 0) { + n -= 4; + wp += 4; + ip += 4; + r1 = (int32) CLAMP(ip[0]); wp[0] = (r1-r2) & mask; r2 = r1; + g1 = (int32) CLAMP(ip[1]); wp[1] = (g1-g2) & mask; g2 = g1; + b1 = (int32) CLAMP(ip[2]); wp[2] = (b1-b2) & mask; b2 = b1; + a1 = (int32) CLAMP(ip[3]); wp[3] = (a1-a2) & mask; a2 = a1; + } + } else { + ip += n - 1; /* point to last one */ + wp += n - 1; /* point to last one */ + n -= stride; + while (n > 0) { + REPEAT(stride, wp[0] = (uint16) CLAMP(ip[0]); + wp[stride] -= wp[0]; + wp[stride] &= mask; + wp--; ip--) + n -= stride; + } + REPEAT(stride, wp[0] = (uint16) CLAMP(ip[0]); wp--; ip--) + } + } +} + +static void +horizontalDifference16(unsigned short *ip, int n, int stride, + unsigned short *wp, uint16 *From14) +{ + register int r1, g1, b1, a1, r2, g2, b2, a2, mask; + +/* assumption is unsigned pixel values */ +#undef CLAMP +#define CLAMP(v) From14[(v) >> 2] + + mask = CODE_MASK; + if (n >= stride) { + if (stride == 3) { + r2 = wp[0] = CLAMP(ip[0]); g2 = wp[1] = CLAMP(ip[1]); + b2 = wp[2] = CLAMP(ip[2]); + n -= 3; + while (n > 0) { + n -= 3; + wp += 3; + ip += 3; + r1 = CLAMP(ip[0]); wp[0] = (r1-r2) & mask; r2 = r1; + g1 = CLAMP(ip[1]); wp[1] = (g1-g2) & mask; g2 = g1; + b1 = CLAMP(ip[2]); wp[2] = (b1-b2) & mask; b2 = b1; + } + } else if (stride == 4) { + r2 = wp[0] = CLAMP(ip[0]); g2 = wp[1] = CLAMP(ip[1]); + b2 = wp[2] = CLAMP(ip[2]); a2 = wp[3] = CLAMP(ip[3]); + n -= 4; + while (n > 0) { + n -= 4; + wp += 4; + ip += 4; + r1 = CLAMP(ip[0]); wp[0] = (r1-r2) & mask; r2 = r1; + g1 = CLAMP(ip[1]); wp[1] = (g1-g2) & mask; g2 = g1; + b1 = CLAMP(ip[2]); wp[2] = (b1-b2) & mask; b2 = b1; + a1 = CLAMP(ip[3]); wp[3] = (a1-a2) & mask; a2 = a1; + } + } else { + ip += n - 1; /* point to last one */ + wp += n - 1; /* point to last one */ + n -= stride; + while (n > 0) { + REPEAT(stride, wp[0] = CLAMP(ip[0]); + wp[stride] -= wp[0]; + wp[stride] &= mask; + wp--; ip--) + n -= stride; + } + REPEAT(stride, wp[0] = CLAMP(ip[0]); wp--; ip--) + } + } +} + + +static void +horizontalDifference8(unsigned char *ip, int n, int stride, + unsigned short *wp, uint16 *From8) +{ + register int r1, g1, b1, a1, r2, g2, b2, a2, mask; + +#undef CLAMP +#define CLAMP(v) (From8[(v)]) + + mask = CODE_MASK; + if (n >= stride) { + if (stride == 3) { + r2 = wp[0] = CLAMP(ip[0]); g2 = wp[1] = CLAMP(ip[1]); + b2 = wp[2] = CLAMP(ip[2]); + n -= 3; + while (n > 0) { + n -= 3; + r1 = CLAMP(ip[3]); wp[3] = (r1-r2) & mask; r2 = r1; + g1 = CLAMP(ip[4]); wp[4] = (g1-g2) & mask; g2 = g1; + b1 = CLAMP(ip[5]); wp[5] = (b1-b2) & mask; b2 = b1; + wp += 3; + ip += 3; + } + } else if (stride == 4) { + r2 = wp[0] = CLAMP(ip[0]); g2 = wp[1] = CLAMP(ip[1]); + b2 = wp[2] = CLAMP(ip[2]); a2 = wp[3] = CLAMP(ip[3]); + n -= 4; + while (n > 0) { + n -= 4; + r1 = CLAMP(ip[4]); wp[4] = (r1-r2) & mask; r2 = r1; + g1 = CLAMP(ip[5]); wp[5] = (g1-g2) & mask; g2 = g1; + b1 = CLAMP(ip[6]); wp[6] = (b1-b2) & mask; b2 = b1; + a1 = CLAMP(ip[7]); wp[7] = (a1-a2) & mask; a2 = a1; + wp += 4; + ip += 4; + } + } else { + wp += n + stride - 1; /* point to last one */ + ip += n + stride - 1; /* point to last one */ + n -= stride; + while (n > 0) { + REPEAT(stride, wp[0] = CLAMP(ip[0]); + wp[stride] -= wp[0]; + wp[stride] &= mask; + wp--; ip--) + n -= stride; + } + REPEAT(stride, wp[0] = CLAMP(ip[0]); wp--; ip--) + } + } +} + +/* + * Encode a chunk of pixels. + */ +static int +PixarLogEncode(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + static const char module[] = "PixarLogEncode"; + TIFFDirectory *td = &tif->tif_dir; + PixarLogState *sp = EncoderState(tif); + tmsize_t i; + tmsize_t n; + int llen; + unsigned short * up; + + (void) s; + + switch (sp->user_datafmt) { + case PIXARLOGDATAFMT_FLOAT: + n = cc / sizeof(float); /* XXX float == 32 bits */ + break; + case PIXARLOGDATAFMT_16BIT: + case PIXARLOGDATAFMT_12BITPICIO: + case PIXARLOGDATAFMT_11BITLOG: + n = cc / sizeof(uint16); /* XXX uint16 == 16 bits */ + break; + case PIXARLOGDATAFMT_8BIT: + case PIXARLOGDATAFMT_8BITABGR: + n = cc; + break; + default: + TIFFErrorExt(tif->tif_clientdata, module, + "%d bit input not supported in PixarLog", + td->td_bitspersample); + return 0; + } + + llen = sp->stride * td->td_imagewidth; + + for (i = 0, up = sp->tbuf; i < n; i += llen, up += llen) { + switch (sp->user_datafmt) { + case PIXARLOGDATAFMT_FLOAT: + horizontalDifferenceF((float *)bp, llen, + sp->stride, up, sp->FromLT2); + bp += llen * sizeof(float); + break; + case PIXARLOGDATAFMT_16BIT: + horizontalDifference16((uint16 *)bp, llen, + sp->stride, up, sp->From14); + bp += llen * sizeof(uint16); + break; + case PIXARLOGDATAFMT_8BIT: + horizontalDifference8((unsigned char *)bp, llen, + sp->stride, up, sp->From8); + bp += llen * sizeof(unsigned char); + break; + default: + TIFFErrorExt(tif->tif_clientdata, module, + "%d bit input not supported in PixarLog", + td->td_bitspersample); + return 0; + } + } + + sp->stream.next_in = (unsigned char *) sp->tbuf; + assert(sizeof(sp->stream.avail_in)==4); /* if this assert gets raised, + we need to simplify this code to reflect a ZLib that is likely updated + to deal with 8byte memory sizes, though this code will respond + apropriately even before we simplify it */ + sp->stream.avail_in = (uInt) (n * sizeof(uint16)); + if ((sp->stream.avail_in / sizeof(uint16)) != (uInt) n) + { + TIFFErrorExt(tif->tif_clientdata, module, + "ZLib cannot deal with buffers this size"); + return (0); + } + + do { + if (deflate(&sp->stream, Z_NO_FLUSH) != Z_OK) { + TIFFErrorExt(tif->tif_clientdata, module, "Encoder error: %s", + sp->stream.msg); + return (0); + } + if (sp->stream.avail_out == 0) { + tif->tif_rawcc = tif->tif_rawdatasize; + TIFFFlushData1(tif); + sp->stream.next_out = tif->tif_rawdata; + sp->stream.avail_out = (uInt) tif->tif_rawdatasize; /* this is a safe typecast, as check is made already in PixarLogPreEncode */ + } + } while (sp->stream.avail_in > 0); + return (1); +} + +/* + * Finish off an encoded strip by flushing the last + * string and tacking on an End Of Information code. + */ + +static int +PixarLogPostEncode(TIFF* tif) +{ + static const char module[] = "PixarLogPostEncode"; + PixarLogState *sp = EncoderState(tif); + int state; + + sp->stream.avail_in = 0; + + do { + state = deflate(&sp->stream, Z_FINISH); + switch (state) { + case Z_STREAM_END: + case Z_OK: + if ((tmsize_t)sp->stream.avail_out != tif->tif_rawdatasize) { + tif->tif_rawcc = + tif->tif_rawdatasize - sp->stream.avail_out; + TIFFFlushData1(tif); + sp->stream.next_out = tif->tif_rawdata; + sp->stream.avail_out = (uInt) tif->tif_rawdatasize; /* this is a safe typecast, as check is made already in PixarLogPreEncode */ + } + break; + default: + TIFFErrorExt(tif->tif_clientdata, module, "ZLib error: %s", + sp->stream.msg); + return (0); + } + } while (state != Z_STREAM_END); + return (1); +} + +static void +PixarLogClose(TIFF* tif) +{ + TIFFDirectory *td = &tif->tif_dir; + + /* In a really sneaky (and really incorrect, and untruthfull, and + * troublesome, and error-prone) maneuver that completely goes against + * the spirit of TIFF, and breaks TIFF, on close, we covertly + * modify both bitspersample and sampleformat in the directory to + * indicate 8-bit linear. This way, the decode "just works" even for + * readers that don't know about PixarLog, or how to set + * the PIXARLOGDATFMT pseudo-tag. + */ + td->td_bitspersample = 8; + td->td_sampleformat = SAMPLEFORMAT_UINT; +} + +static void +PixarLogCleanup(TIFF* tif) +{ + PixarLogState* sp = (PixarLogState*) tif->tif_data; + + assert(sp != 0); + + (void)TIFFPredictorCleanup(tif); + + tif->tif_tagmethods.vgetfield = sp->vgetparent; + tif->tif_tagmethods.vsetfield = sp->vsetparent; + + if (sp->FromLT2) _TIFFfree(sp->FromLT2); + if (sp->From14) _TIFFfree(sp->From14); + if (sp->From8) _TIFFfree(sp->From8); + if (sp->ToLinearF) _TIFFfree(sp->ToLinearF); + if (sp->ToLinear16) _TIFFfree(sp->ToLinear16); + if (sp->ToLinear8) _TIFFfree(sp->ToLinear8); + if (sp->state&PLSTATE_INIT) { + if (tif->tif_mode == O_RDONLY) + inflateEnd(&sp->stream); + else + deflateEnd(&sp->stream); + } + if (sp->tbuf) + _TIFFfree(sp->tbuf); + _TIFFfree(sp); + tif->tif_data = NULL; + + _TIFFSetDefaultCompressionState(tif); +} + +static int +PixarLogVSetField(TIFF* tif, uint32 tag, va_list ap) +{ + static const char module[] = "PixarLogVSetField"; + PixarLogState *sp = (PixarLogState *)tif->tif_data; + int result; + + switch (tag) { + case TIFFTAG_PIXARLOGQUALITY: + sp->quality = (int) va_arg(ap, int); + if (tif->tif_mode != O_RDONLY && (sp->state&PLSTATE_INIT)) { + if (deflateParams(&sp->stream, + sp->quality, Z_DEFAULT_STRATEGY) != Z_OK) { + TIFFErrorExt(tif->tif_clientdata, module, "ZLib error: %s", + sp->stream.msg); + return (0); + } + } + return (1); + case TIFFTAG_PIXARLOGDATAFMT: + sp->user_datafmt = (int) va_arg(ap, int); + /* Tweak the TIFF header so that the rest of libtiff knows what + * size of data will be passed between app and library, and + * assume that the app knows what it is doing and is not + * confused by these header manipulations... + */ + switch (sp->user_datafmt) { + case PIXARLOGDATAFMT_8BIT: + case PIXARLOGDATAFMT_8BITABGR: + TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 8); + TIFFSetField(tif, TIFFTAG_SAMPLEFORMAT, SAMPLEFORMAT_UINT); + break; + case PIXARLOGDATAFMT_11BITLOG: + TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 16); + TIFFSetField(tif, TIFFTAG_SAMPLEFORMAT, SAMPLEFORMAT_UINT); + break; + case PIXARLOGDATAFMT_12BITPICIO: + TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 16); + TIFFSetField(tif, TIFFTAG_SAMPLEFORMAT, SAMPLEFORMAT_INT); + break; + case PIXARLOGDATAFMT_16BIT: + TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 16); + TIFFSetField(tif, TIFFTAG_SAMPLEFORMAT, SAMPLEFORMAT_UINT); + break; + case PIXARLOGDATAFMT_FLOAT: + TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 32); + TIFFSetField(tif, TIFFTAG_SAMPLEFORMAT, SAMPLEFORMAT_IEEEFP); + break; + } + /* + * Must recalculate sizes should bits/sample change. + */ + tif->tif_tilesize = isTiled(tif) ? TIFFTileSize(tif) : (tmsize_t)(-1); + tif->tif_scanlinesize = TIFFScanlineSize(tif); + result = 1; /* NB: pseudo tag */ + break; + default: + result = (*sp->vsetparent)(tif, tag, ap); + } + return (result); +} + +static int +PixarLogVGetField(TIFF* tif, uint32 tag, va_list ap) +{ + PixarLogState *sp = (PixarLogState *)tif->tif_data; + + switch (tag) { + case TIFFTAG_PIXARLOGQUALITY: + *va_arg(ap, int*) = sp->quality; + break; + case TIFFTAG_PIXARLOGDATAFMT: + *va_arg(ap, int*) = sp->user_datafmt; + break; + default: + return (*sp->vgetparent)(tif, tag, ap); + } + return (1); +} + +static const TIFFField pixarlogFields[] = { + {TIFFTAG_PIXARLOGDATAFMT, 0, 0, TIFF_ANY, 0, TIFF_SETGET_INT, TIFF_SETGET_UNDEFINED, FIELD_PSEUDO, FALSE, FALSE, "", NULL}, + {TIFFTAG_PIXARLOGQUALITY, 0, 0, TIFF_ANY, 0, TIFF_SETGET_INT, TIFF_SETGET_UNDEFINED, FIELD_PSEUDO, FALSE, FALSE, "", NULL} +}; + +int +TIFFInitPixarLog(TIFF* tif, int scheme) +{ + static const char module[] = "TIFFInitPixarLog"; + + PixarLogState* sp; + + assert(scheme == COMPRESSION_PIXARLOG); + + /* + * Merge codec-specific tag information. + */ + if (!_TIFFMergeFields(tif, pixarlogFields, + TIFFArrayCount(pixarlogFields))) { + TIFFErrorExt(tif->tif_clientdata, module, + "Merging PixarLog codec-specific tags failed"); + return 0; + } + + /* + * Allocate state block so tag methods have storage to record values. + */ + tif->tif_data = (uint8*) _TIFFmalloc(sizeof (PixarLogState)); + if (tif->tif_data == NULL) + goto bad; + sp = (PixarLogState*) tif->tif_data; + _TIFFmemset(sp, 0, sizeof (*sp)); + sp->stream.data_type = Z_BINARY; + sp->user_datafmt = PIXARLOGDATAFMT_UNKNOWN; + + /* + * Install codec methods. + */ + tif->tif_fixuptags = PixarLogFixupTags; + tif->tif_setupdecode = PixarLogSetupDecode; + tif->tif_predecode = PixarLogPreDecode; + tif->tif_decoderow = PixarLogDecode; + tif->tif_decodestrip = PixarLogDecode; + tif->tif_decodetile = PixarLogDecode; + tif->tif_setupencode = PixarLogSetupEncode; + tif->tif_preencode = PixarLogPreEncode; + tif->tif_postencode = PixarLogPostEncode; + tif->tif_encoderow = PixarLogEncode; + tif->tif_encodestrip = PixarLogEncode; + tif->tif_encodetile = PixarLogEncode; + tif->tif_close = PixarLogClose; + tif->tif_cleanup = PixarLogCleanup; + + /* Override SetField so we can handle our private pseudo-tag */ + sp->vgetparent = tif->tif_tagmethods.vgetfield; + tif->tif_tagmethods.vgetfield = PixarLogVGetField; /* hook for codec tags */ + sp->vsetparent = tif->tif_tagmethods.vsetfield; + tif->tif_tagmethods.vsetfield = PixarLogVSetField; /* hook for codec tags */ + + /* Default values for codec-specific fields */ + sp->quality = Z_DEFAULT_COMPRESSION; /* default comp. level */ + sp->state = 0; + + /* we don't wish to use the predictor, + * the default is none, which predictor value 1 + */ + (void) TIFFPredictorInit(tif); + + /* + * build the companding tables + */ + PixarLogMakeTables(sp); + + return (1); +bad: + TIFFErrorExt(tif->tif_clientdata, module, + "No space for PixarLog state block"); + return (0); +} +#endif /* PIXARLOG_SUPPORT */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_predict.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_predict.c new file mode 100644 index 000000000..f93c6645f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_predict.c @@ -0,0 +1,764 @@ +/* $Id: tif_predict.c,v 1.32 2010-03-10 18:56:49 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * Predictor Tag Support (used by multiple codecs). + */ +#include "tiffiop.h" +#include "tif_predict.h" + +#define PredictorState(tif) ((TIFFPredictorState*) (tif)->tif_data) + +static void horAcc8(TIFF* tif, uint8* cp0, tmsize_t cc); +static void horAcc16(TIFF* tif, uint8* cp0, tmsize_t cc); +static void horAcc32(TIFF* tif, uint8* cp0, tmsize_t cc); +static void swabHorAcc16(TIFF* tif, uint8* cp0, tmsize_t cc); +static void swabHorAcc32(TIFF* tif, uint8* cp0, tmsize_t cc); +static void horDiff8(TIFF* tif, uint8* cp0, tmsize_t cc); +static void horDiff16(TIFF* tif, uint8* cp0, tmsize_t cc); +static void horDiff32(TIFF* tif, uint8* cp0, tmsize_t cc); +static void fpAcc(TIFF* tif, uint8* cp0, tmsize_t cc); +static void fpDiff(TIFF* tif, uint8* cp0, tmsize_t cc); +static int PredictorDecodeRow(TIFF* tif, uint8* op0, tmsize_t occ0, uint16 s); +static int PredictorDecodeTile(TIFF* tif, uint8* op0, tmsize_t occ0, uint16 s); +static int PredictorEncodeRow(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s); +static int PredictorEncodeTile(TIFF* tif, uint8* bp0, tmsize_t cc0, uint16 s); + +static int +PredictorSetup(TIFF* tif) +{ + static const char module[] = "PredictorSetup"; + + TIFFPredictorState* sp = PredictorState(tif); + TIFFDirectory* td = &tif->tif_dir; + + switch (sp->predictor) /* no differencing */ + { + case PREDICTOR_NONE: + return 1; + case PREDICTOR_HORIZONTAL: + if (td->td_bitspersample != 8 + && td->td_bitspersample != 16 + && td->td_bitspersample != 32) { + TIFFErrorExt(tif->tif_clientdata, module, + "Horizontal differencing \"Predictor\" not supported with %d-bit samples", + td->td_bitspersample); + return 0; + } + break; + case PREDICTOR_FLOATINGPOINT: + if (td->td_sampleformat != SAMPLEFORMAT_IEEEFP) { + TIFFErrorExt(tif->tif_clientdata, module, + "Floating point \"Predictor\" not supported with %d data format", + td->td_sampleformat); + return 0; + } + break; + default: + TIFFErrorExt(tif->tif_clientdata, module, + "\"Predictor\" value %d not supported", + sp->predictor); + return 0; + } + sp->stride = (td->td_planarconfig == PLANARCONFIG_CONTIG ? + td->td_samplesperpixel : 1); + /* + * Calculate the scanline/tile-width size in bytes. + */ + if (isTiled(tif)) + sp->rowsize = TIFFTileRowSize(tif); + else + sp->rowsize = TIFFScanlineSize(tif); + if (sp->rowsize == 0) + return 0; + + return 1; +} + +static int +PredictorSetupDecode(TIFF* tif) +{ + TIFFPredictorState* sp = PredictorState(tif); + TIFFDirectory* td = &tif->tif_dir; + + if (!(*sp->setupdecode)(tif) || !PredictorSetup(tif)) + return 0; + + if (sp->predictor == 2) { + switch (td->td_bitspersample) { + case 8: sp->decodepfunc = horAcc8; break; + case 16: sp->decodepfunc = horAcc16; break; + case 32: sp->decodepfunc = horAcc32; break; + } + /* + * Override default decoding method with one that does the + * predictor stuff. + */ + if( tif->tif_decoderow != PredictorDecodeRow ) + { + sp->decoderow = tif->tif_decoderow; + tif->tif_decoderow = PredictorDecodeRow; + sp->decodestrip = tif->tif_decodestrip; + tif->tif_decodestrip = PredictorDecodeTile; + sp->decodetile = tif->tif_decodetile; + tif->tif_decodetile = PredictorDecodeTile; + } + + /* + * If the data is horizontally differenced 16-bit data that + * requires byte-swapping, then it must be byte swapped before + * the accumulation step. We do this with a special-purpose + * routine and override the normal post decoding logic that + * the library setup when the directory was read. + */ + if (tif->tif_flags & TIFF_SWAB) { + if (sp->decodepfunc == horAcc16) { + sp->decodepfunc = swabHorAcc16; + tif->tif_postdecode = _TIFFNoPostDecode; + } else if (sp->decodepfunc == horAcc32) { + sp->decodepfunc = swabHorAcc32; + tif->tif_postdecode = _TIFFNoPostDecode; + } + } + } + + else if (sp->predictor == 3) { + sp->decodepfunc = fpAcc; + /* + * Override default decoding method with one that does the + * predictor stuff. + */ + if( tif->tif_decoderow != PredictorDecodeRow ) + { + sp->decoderow = tif->tif_decoderow; + tif->tif_decoderow = PredictorDecodeRow; + sp->decodestrip = tif->tif_decodestrip; + tif->tif_decodestrip = PredictorDecodeTile; + sp->decodetile = tif->tif_decodetile; + tif->tif_decodetile = PredictorDecodeTile; + } + /* + * The data should not be swapped outside of the floating + * point predictor, the accumulation routine should return + * byres in the native order. + */ + if (tif->tif_flags & TIFF_SWAB) { + tif->tif_postdecode = _TIFFNoPostDecode; + } + /* + * Allocate buffer to keep the decoded bytes before + * rearranging in the ight order + */ + } + + return 1; +} + +static int +PredictorSetupEncode(TIFF* tif) +{ + TIFFPredictorState* sp = PredictorState(tif); + TIFFDirectory* td = &tif->tif_dir; + + if (!(*sp->setupencode)(tif) || !PredictorSetup(tif)) + return 0; + + if (sp->predictor == 2) { + switch (td->td_bitspersample) { + case 8: sp->encodepfunc = horDiff8; break; + case 16: sp->encodepfunc = horDiff16; break; + case 32: sp->encodepfunc = horDiff32; break; + } + /* + * Override default encoding method with one that does the + * predictor stuff. + */ + if( tif->tif_encoderow != PredictorEncodeRow ) + { + sp->encoderow = tif->tif_encoderow; + tif->tif_encoderow = PredictorEncodeRow; + sp->encodestrip = tif->tif_encodestrip; + tif->tif_encodestrip = PredictorEncodeTile; + sp->encodetile = tif->tif_encodetile; + tif->tif_encodetile = PredictorEncodeTile; + } + } + + else if (sp->predictor == 3) { + sp->encodepfunc = fpDiff; + /* + * Override default encoding method with one that does the + * predictor stuff. + */ + if( tif->tif_encoderow != PredictorEncodeRow ) + { + sp->encoderow = tif->tif_encoderow; + tif->tif_encoderow = PredictorEncodeRow; + sp->encodestrip = tif->tif_encodestrip; + tif->tif_encodestrip = PredictorEncodeTile; + sp->encodetile = tif->tif_encodetile; + tif->tif_encodetile = PredictorEncodeTile; + } + } + + return 1; +} + +#define REPEAT4(n, op) \ + switch (n) { \ + default: { tmsize_t i; for (i = n-4; i > 0; i--) { op; } } \ + case 4: op; \ + case 3: op; \ + case 2: op; \ + case 1: op; \ + case 0: ; \ + } + +static void +horAcc8(TIFF* tif, uint8* cp0, tmsize_t cc) +{ + tmsize_t stride = PredictorState(tif)->stride; + + char* cp = (char*) cp0; + assert((cc%stride)==0); + if (cc > stride) { + /* + * Pipeline the most common cases. + */ + if (stride == 3) { + unsigned int cr = cp[0]; + unsigned int cg = cp[1]; + unsigned int cb = cp[2]; + cc -= 3; + cp += 3; + while (cc>0) { + cp[0] = (char) (cr += cp[0]); + cp[1] = (char) (cg += cp[1]); + cp[2] = (char) (cb += cp[2]); + cc -= 3; + cp += 3; + } + } else if (stride == 4) { + unsigned int cr = cp[0]; + unsigned int cg = cp[1]; + unsigned int cb = cp[2]; + unsigned int ca = cp[3]; + cc -= 4; + cp += 4; + while (cc>0) { + cp[0] = (char) (cr += cp[0]); + cp[1] = (char) (cg += cp[1]); + cp[2] = (char) (cb += cp[2]); + cp[3] = (char) (ca += cp[3]); + cc -= 4; + cp += 4; + } + } else { + cc -= stride; + do { + REPEAT4(stride, cp[stride] = + (char) (cp[stride] + *cp); cp++) + cc -= stride; + } while (cc>0); + } + } +} + +static void +swabHorAcc16(TIFF* tif, uint8* cp0, tmsize_t cc) +{ + tmsize_t stride = PredictorState(tif)->stride; + uint16* wp = (uint16*) cp0; + tmsize_t wc = cc / 2; + + assert((cc%(2*stride))==0); + + if (wc > stride) { + TIFFSwabArrayOfShort(wp, wc); + wc -= stride; + do { + REPEAT4(stride, wp[stride] += wp[0]; wp++) + wc -= stride; + } while (wc > 0); + } +} + +static void +horAcc16(TIFF* tif, uint8* cp0, tmsize_t cc) +{ + tmsize_t stride = PredictorState(tif)->stride; + uint16* wp = (uint16*) cp0; + tmsize_t wc = cc / 2; + + assert((cc%(2*stride))==0); + + if (wc > stride) { + wc -= stride; + do { + REPEAT4(stride, wp[stride] += wp[0]; wp++) + wc -= stride; + } while (wc > 0); + } +} + +static void +swabHorAcc32(TIFF* tif, uint8* cp0, tmsize_t cc) +{ + tmsize_t stride = PredictorState(tif)->stride; + uint32* wp = (uint32*) cp0; + tmsize_t wc = cc / 4; + + assert((cc%(4*stride))==0); + + if (wc > stride) { + TIFFSwabArrayOfLong(wp, wc); + wc -= stride; + do { + REPEAT4(stride, wp[stride] += wp[0]; wp++) + wc -= stride; + } while (wc > 0); + } +} + +static void +horAcc32(TIFF* tif, uint8* cp0, tmsize_t cc) +{ + tmsize_t stride = PredictorState(tif)->stride; + uint32* wp = (uint32*) cp0; + tmsize_t wc = cc / 4; + + assert((cc%(4*stride))==0); + + if (wc > stride) { + wc -= stride; + do { + REPEAT4(stride, wp[stride] += wp[0]; wp++) + wc -= stride; + } while (wc > 0); + } +} + +/* + * Floating point predictor accumulation routine. + */ +static void +fpAcc(TIFF* tif, uint8* cp0, tmsize_t cc) +{ + tmsize_t stride = PredictorState(tif)->stride; + uint32 bps = tif->tif_dir.td_bitspersample / 8; + tmsize_t wc = cc / bps; + tmsize_t count = cc; + uint8 *cp = (uint8 *) cp0; + uint8 *tmp = (uint8 *)_TIFFmalloc(cc); + + assert((cc%(bps*stride))==0); + + if (!tmp) + return; + + while (count > stride) { + REPEAT4(stride, cp[stride] += cp[0]; cp++) + count -= stride; + } + + _TIFFmemcpy(tmp, cp0, cc); + cp = (uint8 *) cp0; + for (count = 0; count < wc; count++) { + uint32 byte; + for (byte = 0; byte < bps; byte++) { + #if WORDS_BIGENDIAN + cp[bps * count + byte] = tmp[byte * wc + count]; + #else + cp[bps * count + byte] = + tmp[(bps - byte - 1) * wc + count]; + #endif + } + } + _TIFFfree(tmp); +} + +/* + * Decode a scanline and apply the predictor routine. + */ +static int +PredictorDecodeRow(TIFF* tif, uint8* op0, tmsize_t occ0, uint16 s) +{ + TIFFPredictorState *sp = PredictorState(tif); + + assert(sp != NULL); + assert(sp->decoderow != NULL); + assert(sp->decodepfunc != NULL); + + if ((*sp->decoderow)(tif, op0, occ0, s)) { + (*sp->decodepfunc)(tif, op0, occ0); + return 1; + } else + return 0; +} + +/* + * Decode a tile/strip and apply the predictor routine. + * Note that horizontal differencing must be done on a + * row-by-row basis. The width of a "row" has already + * been calculated at pre-decode time according to the + * strip/tile dimensions. + */ +static int +PredictorDecodeTile(TIFF* tif, uint8* op0, tmsize_t occ0, uint16 s) +{ + TIFFPredictorState *sp = PredictorState(tif); + + assert(sp != NULL); + assert(sp->decodetile != NULL); + + if ((*sp->decodetile)(tif, op0, occ0, s)) { + tmsize_t rowsize = sp->rowsize; + assert(rowsize > 0); + assert((occ0%rowsize)==0); + assert(sp->decodepfunc != NULL); + while (occ0 > 0) { + (*sp->decodepfunc)(tif, op0, rowsize); + occ0 -= rowsize; + op0 += rowsize; + } + return 1; + } else + return 0; +} + +static void +horDiff8(TIFF* tif, uint8* cp0, tmsize_t cc) +{ + TIFFPredictorState* sp = PredictorState(tif); + tmsize_t stride = sp->stride; + char* cp = (char*) cp0; + + assert((cc%stride)==0); + + if (cc > stride) { + cc -= stride; + /* + * Pipeline the most common cases. + */ + if (stride == 3) { + int r1, g1, b1; + int r2 = cp[0]; + int g2 = cp[1]; + int b2 = cp[2]; + do { + r1 = cp[3]; cp[3] = r1-r2; r2 = r1; + g1 = cp[4]; cp[4] = g1-g2; g2 = g1; + b1 = cp[5]; cp[5] = b1-b2; b2 = b1; + cp += 3; + } while ((cc -= 3) > 0); + } else if (stride == 4) { + int r1, g1, b1, a1; + int r2 = cp[0]; + int g2 = cp[1]; + int b2 = cp[2]; + int a2 = cp[3]; + do { + r1 = cp[4]; cp[4] = r1-r2; r2 = r1; + g1 = cp[5]; cp[5] = g1-g2; g2 = g1; + b1 = cp[6]; cp[6] = b1-b2; b2 = b1; + a1 = cp[7]; cp[7] = a1-a2; a2 = a1; + cp += 4; + } while ((cc -= 4) > 0); + } else { + cp += cc - 1; + do { + REPEAT4(stride, cp[stride] -= cp[0]; cp--) + } while ((cc -= stride) > 0); + } + } +} + +static void +horDiff16(TIFF* tif, uint8* cp0, tmsize_t cc) +{ + TIFFPredictorState* sp = PredictorState(tif); + tmsize_t stride = sp->stride; + int16 *wp = (int16*) cp0; + tmsize_t wc = cc/2; + + assert((cc%(2*stride))==0); + + if (wc > stride) { + wc -= stride; + wp += wc - 1; + do { + REPEAT4(stride, wp[stride] -= wp[0]; wp--) + wc -= stride; + } while (wc > 0); + } +} + +static void +horDiff32(TIFF* tif, uint8* cp0, tmsize_t cc) +{ + TIFFPredictorState* sp = PredictorState(tif); + tmsize_t stride = sp->stride; + int32 *wp = (int32*) cp0; + tmsize_t wc = cc/4; + + assert((cc%(4*stride))==0); + + if (wc > stride) { + wc -= stride; + wp += wc - 1; + do { + REPEAT4(stride, wp[stride] -= wp[0]; wp--) + wc -= stride; + } while (wc > 0); + } +} + +/* + * Floating point predictor differencing routine. + */ +static void +fpDiff(TIFF* tif, uint8* cp0, tmsize_t cc) +{ + tmsize_t stride = PredictorState(tif)->stride; + uint32 bps = tif->tif_dir.td_bitspersample / 8; + tmsize_t wc = cc / bps; + tmsize_t count; + uint8 *cp = (uint8 *) cp0; + uint8 *tmp = (uint8 *)_TIFFmalloc(cc); + + assert((cc%(bps*stride))==0); + + if (!tmp) + return; + + _TIFFmemcpy(tmp, cp0, cc); + for (count = 0; count < wc; count++) { + uint32 byte; + for (byte = 0; byte < bps; byte++) { + #if WORDS_BIGENDIAN + cp[byte * wc + count] = tmp[bps * count + byte]; + #else + cp[(bps - byte - 1) * wc + count] = + tmp[bps * count + byte]; + #endif + } + } + _TIFFfree(tmp); + + cp = (uint8 *) cp0; + cp += cc - stride - 1; + for (count = cc; count > stride; count -= stride) + REPEAT4(stride, cp[stride] -= cp[0]; cp--) +} + +static int +PredictorEncodeRow(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + TIFFPredictorState *sp = PredictorState(tif); + + assert(sp != NULL); + assert(sp->encodepfunc != NULL); + assert(sp->encoderow != NULL); + + /* XXX horizontal differencing alters user's data XXX */ + (*sp->encodepfunc)(tif, bp, cc); + return (*sp->encoderow)(tif, bp, cc, s); +} + +static int +PredictorEncodeTile(TIFF* tif, uint8* bp0, tmsize_t cc0, uint16 s) +{ + static const char module[] = "PredictorEncodeTile"; + TIFFPredictorState *sp = PredictorState(tif); + uint8 *working_copy; + tmsize_t cc = cc0, rowsize; + unsigned char* bp; + int result_code; + + assert(sp != NULL); + assert(sp->encodepfunc != NULL); + assert(sp->encodetile != NULL); + + /* + * Do predictor manipulation in a working buffer to avoid altering + * the callers buffer. http://trac.osgeo.org/gdal/ticket/1965 + */ + working_copy = (uint8*) _TIFFmalloc(cc0); + if( working_copy == NULL ) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Out of memory allocating " TIFF_SSIZE_FORMAT " byte temp buffer.", + cc0 ); + return 0; + } + memcpy( working_copy, bp0, cc0 ); + bp = working_copy; + + rowsize = sp->rowsize; + assert(rowsize > 0); + assert((cc0%rowsize)==0); + while (cc > 0) { + (*sp->encodepfunc)(tif, bp, rowsize); + cc -= rowsize; + bp += rowsize; + } + result_code = (*sp->encodetile)(tif, working_copy, cc0, s); + + _TIFFfree( working_copy ); + + return result_code; +} + +#define FIELD_PREDICTOR (FIELD_CODEC+0) /* XXX */ + +static const TIFFField predictFields[] = { + { TIFFTAG_PREDICTOR, 1, 1, TIFF_SHORT, 0, TIFF_SETGET_UINT16, TIFF_SETGET_UINT16, FIELD_PREDICTOR, FALSE, FALSE, "Predictor", NULL }, +}; + +static int +PredictorVSetField(TIFF* tif, uint32 tag, va_list ap) +{ + TIFFPredictorState *sp = PredictorState(tif); + + assert(sp != NULL); + assert(sp->vsetparent != NULL); + + switch (tag) { + case TIFFTAG_PREDICTOR: + sp->predictor = (uint16) va_arg(ap, uint16_vap); + TIFFSetFieldBit(tif, FIELD_PREDICTOR); + break; + default: + return (*sp->vsetparent)(tif, tag, ap); + } + tif->tif_flags |= TIFF_DIRTYDIRECT; + return 1; +} + +static int +PredictorVGetField(TIFF* tif, uint32 tag, va_list ap) +{ + TIFFPredictorState *sp = PredictorState(tif); + + assert(sp != NULL); + assert(sp->vgetparent != NULL); + + switch (tag) { + case TIFFTAG_PREDICTOR: + *va_arg(ap, uint16*) = sp->predictor; + break; + default: + return (*sp->vgetparent)(tif, tag, ap); + } + return 1; +} + +static void +PredictorPrintDir(TIFF* tif, FILE* fd, long flags) +{ + TIFFPredictorState* sp = PredictorState(tif); + + (void) flags; + if (TIFFFieldSet(tif,FIELD_PREDICTOR)) { + fprintf(fd, " Predictor: "); + switch (sp->predictor) { + case 1: fprintf(fd, "none "); break; + case 2: fprintf(fd, "horizontal differencing "); break; + case 3: fprintf(fd, "floating point predictor "); break; + } + fprintf(fd, "%u (0x%x)\n", sp->predictor, sp->predictor); + } + if (sp->printdir) + (*sp->printdir)(tif, fd, flags); +} + +int +TIFFPredictorInit(TIFF* tif) +{ + TIFFPredictorState* sp = PredictorState(tif); + + assert(sp != 0); + + /* + * Merge codec-specific tag information. + */ + if (!_TIFFMergeFields(tif, predictFields, + TIFFArrayCount(predictFields))) { + TIFFErrorExt(tif->tif_clientdata, "TIFFPredictorInit", + "Merging Predictor codec-specific tags failed"); + return 0; + } + + /* + * Override parent get/set field methods. + */ + sp->vgetparent = tif->tif_tagmethods.vgetfield; + tif->tif_tagmethods.vgetfield = + PredictorVGetField;/* hook for predictor tag */ + sp->vsetparent = tif->tif_tagmethods.vsetfield; + tif->tif_tagmethods.vsetfield = + PredictorVSetField;/* hook for predictor tag */ + sp->printdir = tif->tif_tagmethods.printdir; + tif->tif_tagmethods.printdir = + PredictorPrintDir; /* hook for predictor tag */ + + sp->setupdecode = tif->tif_setupdecode; + tif->tif_setupdecode = PredictorSetupDecode; + sp->setupencode = tif->tif_setupencode; + tif->tif_setupencode = PredictorSetupEncode; + + sp->predictor = 1; /* default value */ + sp->encodepfunc = NULL; /* no predictor routine */ + sp->decodepfunc = NULL; /* no predictor routine */ + return 1; +} + +int +TIFFPredictorCleanup(TIFF* tif) +{ + TIFFPredictorState* sp = PredictorState(tif); + + assert(sp != 0); + + tif->tif_tagmethods.vgetfield = sp->vgetparent; + tif->tif_tagmethods.vsetfield = sp->vsetparent; + tif->tif_tagmethods.printdir = sp->printdir; + tif->tif_setupdecode = sp->setupdecode; + tif->tif_setupencode = sp->setupencode; + + return 1; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_predict.h b/src/SDL2/external/tiff-4.0.3/libtiff/tif_predict.h new file mode 100644 index 000000000..dc7144c69 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_predict.h @@ -0,0 +1,77 @@ +/* $Id: tif_predict.h,v 1.8 2010-03-10 18:56:49 bfriesen Exp $ */ + +/* + * Copyright (c) 1995-1997 Sam Leffler + * Copyright (c) 1995-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _TIFFPREDICT_ +#define _TIFFPREDICT_ +/* + * ``Library-private'' Support for the Predictor Tag + */ + +/* + * Codecs that want to support the Predictor tag must place + * this structure first in their private state block so that + * the predictor code can cast tif_data to find its state. + */ +typedef struct { + int predictor; /* predictor tag value */ + tmsize_t stride; /* sample stride over data */ + tmsize_t rowsize; /* tile/strip row size */ + + TIFFCodeMethod encoderow; /* parent codec encode/decode row */ + TIFFCodeMethod encodestrip; /* parent codec encode/decode strip */ + TIFFCodeMethod encodetile; /* parent codec encode/decode tile */ + TIFFPostMethod encodepfunc; /* horizontal differencer */ + + TIFFCodeMethod decoderow; /* parent codec encode/decode row */ + TIFFCodeMethod decodestrip; /* parent codec encode/decode strip */ + TIFFCodeMethod decodetile; /* parent codec encode/decode tile */ + TIFFPostMethod decodepfunc; /* horizontal accumulator */ + + TIFFVGetMethod vgetparent; /* super-class method */ + TIFFVSetMethod vsetparent; /* super-class method */ + TIFFPrintMethod printdir; /* super-class method */ + TIFFBoolMethod setupdecode; /* super-class method */ + TIFFBoolMethod setupencode; /* super-class method */ +} TIFFPredictorState; + +#if defined(__cplusplus) +extern "C" { +#endif +extern int TIFFPredictorInit(TIFF*); +extern int TIFFPredictorCleanup(TIFF*); +#if defined(__cplusplus) +} +#endif +#endif /* _TIFFPREDICT_ */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_print.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_print.c new file mode 100644 index 000000000..402666d7f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_print.c @@ -0,0 +1,716 @@ +/* $Id: tif_print.c,v 1.60 2012-08-19 16:56:35 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * Directory Printing Support + */ +#include "tiffiop.h" +#include + +#include + +static void +_TIFFprintAsciiBounded(FILE* fd, const char* cp, int max_chars); + +static const char *photoNames[] = { + "min-is-white", /* PHOTOMETRIC_MINISWHITE */ + "min-is-black", /* PHOTOMETRIC_MINISBLACK */ + "RGB color", /* PHOTOMETRIC_RGB */ + "palette color (RGB from colormap)", /* PHOTOMETRIC_PALETTE */ + "transparency mask", /* PHOTOMETRIC_MASK */ + "separated", /* PHOTOMETRIC_SEPARATED */ + "YCbCr", /* PHOTOMETRIC_YCBCR */ + "7 (0x7)", + "CIE L*a*b*", /* PHOTOMETRIC_CIELAB */ + "ICC L*a*b*", /* PHOTOMETRIC_ICCLAB */ + "ITU L*a*b*" /* PHOTOMETRIC_ITULAB */ +}; +#define NPHOTONAMES (sizeof (photoNames) / sizeof (photoNames[0])) + +static const char *orientNames[] = { + "0 (0x0)", + "row 0 top, col 0 lhs", /* ORIENTATION_TOPLEFT */ + "row 0 top, col 0 rhs", /* ORIENTATION_TOPRIGHT */ + "row 0 bottom, col 0 rhs", /* ORIENTATION_BOTRIGHT */ + "row 0 bottom, col 0 lhs", /* ORIENTATION_BOTLEFT */ + "row 0 lhs, col 0 top", /* ORIENTATION_LEFTTOP */ + "row 0 rhs, col 0 top", /* ORIENTATION_RIGHTTOP */ + "row 0 rhs, col 0 bottom", /* ORIENTATION_RIGHTBOT */ + "row 0 lhs, col 0 bottom", /* ORIENTATION_LEFTBOT */ +}; +#define NORIENTNAMES (sizeof (orientNames) / sizeof (orientNames[0])) + +static void +_TIFFPrintField(FILE* fd, const TIFFField *fip, + uint32 value_count, void *raw_data) +{ + uint32 j; + + fprintf(fd, " %s: ", fip->field_name); + + for(j = 0; j < value_count; j++) { + if(fip->field_type == TIFF_BYTE) + fprintf(fd, "%u", ((uint8 *) raw_data)[j]); + else if(fip->field_type == TIFF_UNDEFINED) + fprintf(fd, "0x%x", + (unsigned int) ((unsigned char *) raw_data)[j]); + else if(fip->field_type == TIFF_SBYTE) + fprintf(fd, "%d", ((int8 *) raw_data)[j]); + else if(fip->field_type == TIFF_SHORT) + fprintf(fd, "%u", ((uint16 *) raw_data)[j]); + else if(fip->field_type == TIFF_SSHORT) + fprintf(fd, "%d", ((int16 *) raw_data)[j]); + else if(fip->field_type == TIFF_LONG) + fprintf(fd, "%lu", + (unsigned long)((uint32 *) raw_data)[j]); + else if(fip->field_type == TIFF_SLONG) + fprintf(fd, "%ld", (long)((int32 *) raw_data)[j]); + else if(fip->field_type == TIFF_IFD) + fprintf(fd, "0x%lx", + (unsigned long)((uint32 *) raw_data)[j]); + else if(fip->field_type == TIFF_RATIONAL + || fip->field_type == TIFF_SRATIONAL + || fip->field_type == TIFF_FLOAT) + fprintf(fd, "%f", ((float *) raw_data)[j]); + else if(fip->field_type == TIFF_LONG8) +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + fprintf(fd, "%I64u", + (unsigned __int64)((uint64 *) raw_data)[j]); +#else + fprintf(fd, "%llu", + (unsigned long long)((uint64 *) raw_data)[j]); +#endif + else if(fip->field_type == TIFF_SLONG8) +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + fprintf(fd, "%I64d", (__int64)((int64 *) raw_data)[j]); +#else + fprintf(fd, "%lld", (long long)((int64 *) raw_data)[j]); +#endif + else if(fip->field_type == TIFF_IFD8) +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + fprintf(fd, "0x%I64x", + (unsigned __int64)((uint64 *) raw_data)[j]); +#else + fprintf(fd, "0x%llx", + (unsigned long long)((uint64 *) raw_data)[j]); +#endif + else if(fip->field_type == TIFF_FLOAT) + fprintf(fd, "%f", ((float *)raw_data)[j]); + else if(fip->field_type == TIFF_DOUBLE) + fprintf(fd, "%f", ((double *) raw_data)[j]); + else if(fip->field_type == TIFF_ASCII) { + fprintf(fd, "%s", (char *) raw_data); + break; + } + else { + fprintf(fd, ""); + break; + } + + if(j < value_count - 1) + fprintf(fd, ","); + } + + fprintf(fd, "\n"); +} + +static int +_TIFFPrettyPrintField(TIFF* tif, const TIFFField *fip, FILE* fd, uint32 tag, + uint32 value_count, void *raw_data) +{ + (void) tif; + + /* do not try to pretty print auto-defined fields */ + if (strncmp(fip->field_name,"Tag ", 4) == 0) { + return 0; + } + + switch (tag) + { + case TIFFTAG_INKSET: + if (value_count == 2 && fip->field_type == TIFF_SHORT) { + fprintf(fd, " Ink Set: "); + switch (*((uint16*)raw_data)) { + case INKSET_CMYK: + fprintf(fd, "CMYK\n"); + break; + default: + fprintf(fd, "%u (0x%x)\n", + *((uint16*)raw_data), + *((uint16*)raw_data)); + break; + } + return 1; + } + return 0; + + case TIFFTAG_DOTRANGE: + if (value_count == 2 && fip->field_type == TIFF_SHORT) { + fprintf(fd, " Dot Range: %u-%u\n", + ((uint16*)raw_data)[0], ((uint16*)raw_data)[1]); + return 1; + } + return 0; + + case TIFFTAG_WHITEPOINT: + if (value_count == 2 && fip->field_type == TIFF_RATIONAL) { + fprintf(fd, " White Point: %g-%g\n", + ((float *)raw_data)[0], ((float *)raw_data)[1]); + return 1; + } + return 0; + + case TIFFTAG_XMLPACKET: + { + uint32 i; + + fprintf(fd, " XMLPacket (XMP Metadata):\n" ); + for(i = 0; i < value_count; i++) + fputc(((char *)raw_data)[i], fd); + fprintf( fd, "\n" ); + return 1; + } + case TIFFTAG_RICHTIFFIPTC: + /* + * XXX: for some weird reason RichTIFFIPTC tag + * defined as array of LONG values. + */ + fprintf(fd, + " RichTIFFIPTC Data: , %lu bytes\n", + (unsigned long) value_count * 4); + return 1; + + case TIFFTAG_PHOTOSHOP: + fprintf(fd, " Photoshop Data: , %lu bytes\n", + (unsigned long) value_count); + return 1; + + case TIFFTAG_ICCPROFILE: + fprintf(fd, " ICC Profile: , %lu bytes\n", + (unsigned long) value_count); + return 1; + + case TIFFTAG_STONITS: + if (value_count == 1 && fip->field_type == TIFF_DOUBLE) { + fprintf(fd, + " Sample to Nits conversion factor: %.4e\n", + *((double*)raw_data)); + return 1; + } + return 0; + } + + return 0; +} + +/* + * Print the contents of the current directory + * to the specified stdio file stream. + */ +void +TIFFPrintDirectory(TIFF* tif, FILE* fd, long flags) +{ + TIFFDirectory *td = &tif->tif_dir; + char *sep; + uint16 i; + long l, n; + +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + fprintf(fd, "TIFF Directory at offset 0x%I64x (%I64u)\n", + (unsigned __int64) tif->tif_diroff, + (unsigned __int64) tif->tif_diroff); +#else + fprintf(fd, "TIFF Directory at offset 0x%llx (%llu)\n", + (unsigned long long) tif->tif_diroff, + (unsigned long long) tif->tif_diroff); +#endif + if (TIFFFieldSet(tif,FIELD_SUBFILETYPE)) { + fprintf(fd, " Subfile Type:"); + sep = " "; + if (td->td_subfiletype & FILETYPE_REDUCEDIMAGE) { + fprintf(fd, "%sreduced-resolution image", sep); + sep = "/"; + } + if (td->td_subfiletype & FILETYPE_PAGE) { + fprintf(fd, "%smulti-page document", sep); + sep = "/"; + } + if (td->td_subfiletype & FILETYPE_MASK) + fprintf(fd, "%stransparency mask", sep); + fprintf(fd, " (%lu = 0x%lx)\n", + (long) td->td_subfiletype, (long) td->td_subfiletype); + } + if (TIFFFieldSet(tif,FIELD_IMAGEDIMENSIONS)) { + fprintf(fd, " Image Width: %lu Image Length: %lu", + (unsigned long) td->td_imagewidth, (unsigned long) td->td_imagelength); + if (TIFFFieldSet(tif,FIELD_IMAGEDEPTH)) + fprintf(fd, " Image Depth: %lu", + (unsigned long) td->td_imagedepth); + fprintf(fd, "\n"); + } + if (TIFFFieldSet(tif,FIELD_TILEDIMENSIONS)) { + fprintf(fd, " Tile Width: %lu Tile Length: %lu", + (unsigned long) td->td_tilewidth, (unsigned long) td->td_tilelength); + if (TIFFFieldSet(tif,FIELD_TILEDEPTH)) + fprintf(fd, " Tile Depth: %lu", + (unsigned long) td->td_tiledepth); + fprintf(fd, "\n"); + } + if (TIFFFieldSet(tif,FIELD_RESOLUTION)) { + fprintf(fd, " Resolution: %g, %g", + td->td_xresolution, td->td_yresolution); + if (TIFFFieldSet(tif,FIELD_RESOLUTIONUNIT)) { + switch (td->td_resolutionunit) { + case RESUNIT_NONE: + fprintf(fd, " (unitless)"); + break; + case RESUNIT_INCH: + fprintf(fd, " pixels/inch"); + break; + case RESUNIT_CENTIMETER: + fprintf(fd, " pixels/cm"); + break; + default: + fprintf(fd, " (unit %u = 0x%x)", + td->td_resolutionunit, + td->td_resolutionunit); + break; + } + } + fprintf(fd, "\n"); + } + if (TIFFFieldSet(tif,FIELD_POSITION)) + fprintf(fd, " Position: %g, %g\n", + td->td_xposition, td->td_yposition); + if (TIFFFieldSet(tif,FIELD_BITSPERSAMPLE)) + fprintf(fd, " Bits/Sample: %u\n", td->td_bitspersample); + if (TIFFFieldSet(tif,FIELD_SAMPLEFORMAT)) { + fprintf(fd, " Sample Format: "); + switch (td->td_sampleformat) { + case SAMPLEFORMAT_VOID: + fprintf(fd, "void\n"); + break; + case SAMPLEFORMAT_INT: + fprintf(fd, "signed integer\n"); + break; + case SAMPLEFORMAT_UINT: + fprintf(fd, "unsigned integer\n"); + break; + case SAMPLEFORMAT_IEEEFP: + fprintf(fd, "IEEE floating point\n"); + break; + case SAMPLEFORMAT_COMPLEXINT: + fprintf(fd, "complex signed integer\n"); + break; + case SAMPLEFORMAT_COMPLEXIEEEFP: + fprintf(fd, "complex IEEE floating point\n"); + break; + default: + fprintf(fd, "%u (0x%x)\n", + td->td_sampleformat, td->td_sampleformat); + break; + } + } + if (TIFFFieldSet(tif,FIELD_COMPRESSION)) { + const TIFFCodec* c = TIFFFindCODEC(td->td_compression); + fprintf(fd, " Compression Scheme: "); + if (c) + fprintf(fd, "%s\n", c->name); + else + fprintf(fd, "%u (0x%x)\n", + td->td_compression, td->td_compression); + } + if (TIFFFieldSet(tif,FIELD_PHOTOMETRIC)) { + fprintf(fd, " Photometric Interpretation: "); + if (td->td_photometric < NPHOTONAMES) + fprintf(fd, "%s\n", photoNames[td->td_photometric]); + else { + switch (td->td_photometric) { + case PHOTOMETRIC_LOGL: + fprintf(fd, "CIE Log2(L)\n"); + break; + case PHOTOMETRIC_LOGLUV: + fprintf(fd, "CIE Log2(L) (u',v')\n"); + break; + default: + fprintf(fd, "%u (0x%x)\n", + td->td_photometric, td->td_photometric); + break; + } + } + } + if (TIFFFieldSet(tif,FIELD_EXTRASAMPLES) && td->td_extrasamples) { + fprintf(fd, " Extra Samples: %u<", td->td_extrasamples); + sep = ""; + for (i = 0; i < td->td_extrasamples; i++) { + switch (td->td_sampleinfo[i]) { + case EXTRASAMPLE_UNSPECIFIED: + fprintf(fd, "%sunspecified", sep); + break; + case EXTRASAMPLE_ASSOCALPHA: + fprintf(fd, "%sassoc-alpha", sep); + break; + case EXTRASAMPLE_UNASSALPHA: + fprintf(fd, "%sunassoc-alpha", sep); + break; + default: + fprintf(fd, "%s%u (0x%x)", sep, + td->td_sampleinfo[i], td->td_sampleinfo[i]); + break; + } + sep = ", "; + } + fprintf(fd, ">\n"); + } + if (TIFFFieldSet(tif,FIELD_INKNAMES)) { + char* cp; + fprintf(fd, " Ink Names: "); + i = td->td_samplesperpixel; + sep = ""; + for (cp = td->td_inknames; + i > 0 && cp < td->td_inknames + td->td_inknameslen; + cp = strchr(cp,'\0')+1, i--) { + int max_chars = + td->td_inknameslen - (cp - td->td_inknames); + fputs(sep, fd); + _TIFFprintAsciiBounded(fd, cp, max_chars); + sep = ", "; + } + fputs("\n", fd); + } + if (TIFFFieldSet(tif,FIELD_THRESHHOLDING)) { + fprintf(fd, " Thresholding: "); + switch (td->td_threshholding) { + case THRESHHOLD_BILEVEL: + fprintf(fd, "bilevel art scan\n"); + break; + case THRESHHOLD_HALFTONE: + fprintf(fd, "halftone or dithered scan\n"); + break; + case THRESHHOLD_ERRORDIFFUSE: + fprintf(fd, "error diffused\n"); + break; + default: + fprintf(fd, "%u (0x%x)\n", + td->td_threshholding, td->td_threshholding); + break; + } + } + if (TIFFFieldSet(tif,FIELD_FILLORDER)) { + fprintf(fd, " FillOrder: "); + switch (td->td_fillorder) { + case FILLORDER_MSB2LSB: + fprintf(fd, "msb-to-lsb\n"); + break; + case FILLORDER_LSB2MSB: + fprintf(fd, "lsb-to-msb\n"); + break; + default: + fprintf(fd, "%u (0x%x)\n", + td->td_fillorder, td->td_fillorder); + break; + } + } + if (TIFFFieldSet(tif,FIELD_YCBCRSUBSAMPLING)) + { + fprintf(fd, " YCbCr Subsampling: %u, %u\n", + td->td_ycbcrsubsampling[0], td->td_ycbcrsubsampling[1] ); + } + if (TIFFFieldSet(tif,FIELD_YCBCRPOSITIONING)) { + fprintf(fd, " YCbCr Positioning: "); + switch (td->td_ycbcrpositioning) { + case YCBCRPOSITION_CENTERED: + fprintf(fd, "centered\n"); + break; + case YCBCRPOSITION_COSITED: + fprintf(fd, "cosited\n"); + break; + default: + fprintf(fd, "%u (0x%x)\n", + td->td_ycbcrpositioning, td->td_ycbcrpositioning); + break; + } + } + if (TIFFFieldSet(tif,FIELD_HALFTONEHINTS)) + fprintf(fd, " Halftone Hints: light %u dark %u\n", + td->td_halftonehints[0], td->td_halftonehints[1]); + if (TIFFFieldSet(tif,FIELD_ORIENTATION)) { + fprintf(fd, " Orientation: "); + if (td->td_orientation < NORIENTNAMES) + fprintf(fd, "%s\n", orientNames[td->td_orientation]); + else + fprintf(fd, "%u (0x%x)\n", + td->td_orientation, td->td_orientation); + } + if (TIFFFieldSet(tif,FIELD_SAMPLESPERPIXEL)) + fprintf(fd, " Samples/Pixel: %u\n", td->td_samplesperpixel); + if (TIFFFieldSet(tif,FIELD_ROWSPERSTRIP)) { + fprintf(fd, " Rows/Strip: "); + if (td->td_rowsperstrip == (uint32) -1) + fprintf(fd, "(infinite)\n"); + else + fprintf(fd, "%lu\n", (unsigned long) td->td_rowsperstrip); + } + if (TIFFFieldSet(tif,FIELD_MINSAMPLEVALUE)) + fprintf(fd, " Min Sample Value: %u\n", td->td_minsamplevalue); + if (TIFFFieldSet(tif,FIELD_MAXSAMPLEVALUE)) + fprintf(fd, " Max Sample Value: %u\n", td->td_maxsamplevalue); + if (TIFFFieldSet(tif,FIELD_SMINSAMPLEVALUE)) { + int count = (tif->tif_flags & TIFF_PERSAMPLE) ? td->td_samplesperpixel : 1; + fprintf(fd, " SMin Sample Value:"); + for (i = 0; i < count; ++i) + fprintf(fd, " %g", td->td_sminsamplevalue[i]); + fprintf(fd, "\n"); + } + if (TIFFFieldSet(tif,FIELD_SMAXSAMPLEVALUE)) { + int count = (tif->tif_flags & TIFF_PERSAMPLE) ? td->td_samplesperpixel : 1; + fprintf(fd, " SMax Sample Value:"); + for (i = 0; i < count; ++i) + fprintf(fd, " %g", td->td_smaxsamplevalue[i]); + fprintf(fd, "\n"); + } + if (TIFFFieldSet(tif,FIELD_PLANARCONFIG)) { + fprintf(fd, " Planar Configuration: "); + switch (td->td_planarconfig) { + case PLANARCONFIG_CONTIG: + fprintf(fd, "single image plane\n"); + break; + case PLANARCONFIG_SEPARATE: + fprintf(fd, "separate image planes\n"); + break; + default: + fprintf(fd, "%u (0x%x)\n", + td->td_planarconfig, td->td_planarconfig); + break; + } + } + if (TIFFFieldSet(tif,FIELD_PAGENUMBER)) + fprintf(fd, " Page Number: %u-%u\n", + td->td_pagenumber[0], td->td_pagenumber[1]); + if (TIFFFieldSet(tif,FIELD_COLORMAP)) { + fprintf(fd, " Color Map: "); + if (flags & TIFFPRINT_COLORMAP) { + fprintf(fd, "\n"); + n = 1L<td_bitspersample; + for (l = 0; l < n; l++) + fprintf(fd, " %5lu: %5u %5u %5u\n", + l, + td->td_colormap[0][l], + td->td_colormap[1][l], + td->td_colormap[2][l]); + } else + fprintf(fd, "(present)\n"); + } + if (TIFFFieldSet(tif,FIELD_REFBLACKWHITE)) { + fprintf(fd, " Reference Black/White:\n"); + for (i = 0; i < 3; i++) + fprintf(fd, " %2d: %5g %5g\n", i, + td->td_refblackwhite[2*i+0], + td->td_refblackwhite[2*i+1]); + } + if (TIFFFieldSet(tif,FIELD_TRANSFERFUNCTION)) { + fprintf(fd, " Transfer Function: "); + if (flags & TIFFPRINT_CURVES) { + fprintf(fd, "\n"); + n = 1L<td_bitspersample; + for (l = 0; l < n; l++) { + fprintf(fd, " %2lu: %5u", + l, td->td_transferfunction[0][l]); + for (i = 1; i < td->td_samplesperpixel; i++) + fprintf(fd, " %5u", + td->td_transferfunction[i][l]); + fputc('\n', fd); + } + } else + fprintf(fd, "(present)\n"); + } + if (TIFFFieldSet(tif, FIELD_SUBIFD) && (td->td_subifd)) { + fprintf(fd, " SubIFD Offsets:"); + for (i = 0; i < td->td_nsubifd; i++) +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + fprintf(fd, " %5I64u", + (unsigned __int64) td->td_subifd[i]); +#else + fprintf(fd, " %5llu", + (unsigned long long) td->td_subifd[i]); +#endif + fputc('\n', fd); + } + + /* + ** Custom tag support. + */ + { + int i; + short count; + + count = (short) TIFFGetTagListCount(tif); + for(i = 0; i < count; i++) { + uint32 tag = TIFFGetTagListEntry(tif, i); + const TIFFField *fip; + uint32 value_count; + int mem_alloc = 0; + void *raw_data; + + fip = TIFFFieldWithTag(tif, tag); + if(fip == NULL) + continue; + + if(fip->field_passcount) { + if (fip->field_readcount == TIFF_VARIABLE ) { + if(TIFFGetField(tif, tag, &value_count, &raw_data) != 1) + continue; + } else if (fip->field_readcount == TIFF_VARIABLE2 ) { + uint16 small_value_count; + if(TIFFGetField(tif, tag, &small_value_count, &raw_data) != 1) + continue; + value_count = small_value_count; + } else { + assert (fip->field_readcount == TIFF_VARIABLE + || fip->field_readcount == TIFF_VARIABLE2); + continue; + } + } else { + if (fip->field_readcount == TIFF_VARIABLE + || fip->field_readcount == TIFF_VARIABLE2) + value_count = 1; + else if (fip->field_readcount == TIFF_SPP) + value_count = td->td_samplesperpixel; + else + value_count = fip->field_readcount; + if (fip->field_tag == TIFFTAG_DOTRANGE + && strcmp(fip->field_name,"DotRange") == 0) { + /* TODO: This is an evil exception and should not have been + handled this way ... likely best if we move it into + the directory structure with an explicit field in + libtiff 4.1 and assign it a FIELD_ value */ + static uint16 dotrange[2]; + raw_data = dotrange; + TIFFGetField(tif, tag, dotrange+0, dotrange+1); + } else if (fip->field_type == TIFF_ASCII + || fip->field_readcount == TIFF_VARIABLE + || fip->field_readcount == TIFF_VARIABLE2 + || fip->field_readcount == TIFF_SPP + || value_count > 1) { + if(TIFFGetField(tif, tag, &raw_data) != 1) + continue; + } else { + raw_data = _TIFFmalloc( + _TIFFDataSize(fip->field_type) + * value_count); + mem_alloc = 1; + if(TIFFGetField(tif, tag, raw_data) != 1) { + _TIFFfree(raw_data); + continue; + } + } + } + + /* + * Catch the tags which needs to be specially handled + * and pretty print them. If tag not handled in + * _TIFFPrettyPrintField() fall down and print it as + * any other tag. + */ + if (!_TIFFPrettyPrintField(tif, fip, fd, tag, value_count, raw_data)) + _TIFFPrintField(fd, fip, value_count, raw_data); + + if(mem_alloc) + _TIFFfree(raw_data); + } + } + + if (tif->tif_tagmethods.printdir) + (*tif->tif_tagmethods.printdir)(tif, fd, flags); + + _TIFFFillStriles( tif ); + + if ((flags & TIFFPRINT_STRIPS) && + TIFFFieldSet(tif,FIELD_STRIPOFFSETS)) { + uint32 s; + + fprintf(fd, " %lu %s:\n", + (long) td->td_nstrips, + isTiled(tif) ? "Tiles" : "Strips"); + for (s = 0; s < td->td_nstrips; s++) +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + fprintf(fd, " %3lu: [%8I64u, %8I64u]\n", + (unsigned long) s, + (unsigned __int64) td->td_stripoffset[s], + (unsigned __int64) td->td_stripbytecount[s]); +#else + fprintf(fd, " %3lu: [%8llu, %8llu]\n", + (unsigned long) s, + (unsigned long long) td->td_stripoffset[s], + (unsigned long long) td->td_stripbytecount[s]); +#endif + } +} + +void +_TIFFprintAscii(FILE* fd, const char* cp) +{ + _TIFFprintAsciiBounded( fd, cp, strlen(cp)); +} + +static void +_TIFFprintAsciiBounded(FILE* fd, const char* cp, int max_chars) +{ + for (; max_chars > 0 && *cp != '\0'; cp++, max_chars--) { + const char* tp; + + if (isprint((int)*cp)) { + fputc(*cp, fd); + continue; + } + for (tp = "\tt\bb\rr\nn\vv"; *tp; tp++) + if (*tp++ == *cp) + break; + if (*tp) + fprintf(fd, "\\%c", *tp); + else + fprintf(fd, "\\%03o", *cp & 0xff); + } +} + +void +_TIFFprintAsciiTag(FILE* fd, const char* name, const char* value) +{ + fprintf(fd, " %s: \"", name); + _TIFFprintAscii(fd, value); + fprintf(fd, "\"\n"); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_read.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_read.c new file mode 100644 index 000000000..fe36e683c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_read.c @@ -0,0 +1,1083 @@ +/* $Id: tif_read.c,v 1.41 2012-07-06 19:22:58 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * Scanline-oriented Read Support + */ +#include "tiffiop.h" +#include + +int TIFFFillStrip(TIFF* tif, uint32 strip); +int TIFFFillTile(TIFF* tif, uint32 tile); +static int TIFFStartStrip(TIFF* tif, uint32 strip); +static int TIFFStartTile(TIFF* tif, uint32 tile); +static int TIFFCheckRead(TIFF*, int); +static tmsize_t +TIFFReadRawStrip1(TIFF* tif, uint32 strip, void* buf, tmsize_t size,const char* module); + +#define NOSTRIP ((uint32)(-1)) /* undefined state */ +#define NOTILE ((uint32)(-1)) /* undefined state */ + +static int +TIFFFillStripPartial( TIFF *tif, int strip, tmsize_t read_ahead, int restart ) +{ + static const char module[] = "TIFFFillStripPartial"; + register TIFFDirectory *td = &tif->tif_dir; + uint64 unused_data; + uint64 read_offset; + tmsize_t cc, to_read; + /* tmsize_t bytecountm; */ + + if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) + return 0; + + /* + * Expand raw data buffer, if needed, to hold data + * strip coming from file (perhaps should set upper + * bound on the size of a buffer we'll use?). + */ + + /* bytecountm=(tmsize_t) td->td_stripbytecount[strip]; */ + if (read_ahead*2 > tif->tif_rawdatasize) { + assert( restart ); + + tif->tif_curstrip = NOSTRIP; + if ((tif->tif_flags & TIFF_MYBUFFER) == 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "Data buffer too small to hold part of strip %lu", + (unsigned long) strip); + return (0); + } + if (!TIFFReadBufferSetup(tif, 0, read_ahead*2)) + return (0); + } + + if( restart ) + { + tif->tif_rawdataloaded = 0; + tif->tif_rawdataoff = 0; + } + + /* + ** If we are reading more data, move any unused data to the + ** start of the buffer. + */ + if( tif->tif_rawdataloaded > 0 ) + unused_data = tif->tif_rawdataloaded - (tif->tif_rawcp - tif->tif_rawdata); + else + unused_data = 0; + + if( unused_data > 0 ) + { + assert((tif->tif_flags&TIFF_BUFFERMMAP)==0); + memmove( tif->tif_rawdata, tif->tif_rawcp, unused_data ); + } + + /* + ** Seek to the point in the file where more data should be read. + */ + read_offset = td->td_stripoffset[strip] + + tif->tif_rawdataoff + tif->tif_rawdataloaded; + + if (!SeekOK(tif, read_offset)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Seek error at scanline %lu, strip %lu", + (unsigned long) tif->tif_row, (unsigned long) strip); + return 0; + } + + /* + ** How much do we want to read? + */ + to_read = tif->tif_rawdatasize - unused_data; + if( (uint64) to_read > td->td_stripbytecount[strip] + - tif->tif_rawdataoff - tif->tif_rawdataloaded ) + { + to_read = td->td_stripbytecount[strip] + - tif->tif_rawdataoff - tif->tif_rawdataloaded; + } + + assert((tif->tif_flags&TIFF_BUFFERMMAP)==0); + cc = TIFFReadFile(tif, tif->tif_rawdata + unused_data, to_read); + + if (cc != to_read) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "Read error at scanline %lu; got %I64u bytes, expected %I64u", + (unsigned long) tif->tif_row, + (unsigned __int64) cc, + (unsigned __int64) to_read); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "Read error at scanline %lu; got %llu bytes, expected %llu", + (unsigned long) tif->tif_row, + (unsigned long long) cc, + (unsigned long long) to_read); +#endif + return 0; + } + + tif->tif_rawdataoff = tif->tif_rawdataoff + tif->tif_rawdataloaded - unused_data ; + tif->tif_rawdataloaded = unused_data + to_read; + + tif->tif_rawcp = tif->tif_rawdata; + + if (!isFillOrder(tif, td->td_fillorder) && + (tif->tif_flags & TIFF_NOBITREV) == 0) { + assert((tif->tif_flags&TIFF_BUFFERMMAP)==0); + TIFFReverseBits(tif->tif_rawdata + unused_data, to_read ); + } + + /* + ** When starting a strip from the beginning we need to + ** restart the decoder. + */ + if( restart ) + return TIFFStartStrip(tif, strip); + else + return 1; +} + +/* + * Seek to a random row+sample in a file. + * + * Only used by TIFFReadScanline, and is only used on + * strip organized files. We do some tricky stuff to try + * and avoid reading the whole compressed raw data for big + * strips. + */ +static int +TIFFSeek(TIFF* tif, uint32 row, uint16 sample ) +{ + register TIFFDirectory *td = &tif->tif_dir; + uint32 strip; + int whole_strip; + tmsize_t read_ahead = 0; + + /* + ** Establish what strip we are working from. + */ + if (row >= td->td_imagelength) { /* out of range */ + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "%lu: Row out of range, max %lu", + (unsigned long) row, + (unsigned long) td->td_imagelength); + return (0); + } + if (td->td_planarconfig == PLANARCONFIG_SEPARATE) { + if (sample >= td->td_samplesperpixel) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "%lu: Sample out of range, max %lu", + (unsigned long) sample, (unsigned long) td->td_samplesperpixel); + return (0); + } + strip = (uint32)sample*td->td_stripsperimage + row/td->td_rowsperstrip; + } else + strip = row / td->td_rowsperstrip; + + /* + * Do we want to treat this strip as one whole chunk or + * read it a few lines at a time? + */ +#if defined(CHUNKY_STRIP_READ_SUPPORT) + if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) + return 0; + whole_strip = tif->tif_dir.td_stripbytecount[strip] < 10 + || isMapped(tif); +#else + whole_strip = 1; +#endif + + if( !whole_strip ) + { + read_ahead = tif->tif_scanlinesize * 16 + 5000; + } + + /* + * If we haven't loaded this strip, do so now, possibly + * only reading the first part. + */ + if (strip != tif->tif_curstrip) { /* different strip, refill */ + + if( whole_strip ) + { + if (!TIFFFillStrip(tif, strip)) + return (0); + } + else + { + if( !TIFFFillStripPartial(tif,strip,read_ahead,1) ) + return 0; + } + } + + /* + ** If we already have some data loaded, do we need to read some more? + */ + else if( !whole_strip ) + { + if( ((tif->tif_rawdata + tif->tif_rawdataloaded) - tif->tif_rawcp) < read_ahead + && (uint64) tif->tif_rawdataoff+tif->tif_rawdataloaded < td->td_stripbytecount[strip] ) + { + if( !TIFFFillStripPartial(tif,strip,read_ahead,0) ) + return 0; + } + } + + if (row < tif->tif_row) { + /* + * Moving backwards within the same strip: backup + * to the start and then decode forward (below). + * + * NB: If you're planning on lots of random access within a + * strip, it's better to just read and decode the entire + * strip, and then access the decoded data in a random fashion. + */ + + if( tif->tif_rawdataoff != 0 ) + { + if( !TIFFFillStripPartial(tif,strip,read_ahead,1) ) + return 0; + } + else + { + if (!TIFFStartStrip(tif, strip)) + return (0); + } + } + + if (row != tif->tif_row) { + /* + * Seek forward to the desired row. + */ + + /* TODO: Will this really work with partial buffers? */ + + if (!(*tif->tif_seek)(tif, row - tif->tif_row)) + return (0); + tif->tif_row = row; + } + + return (1); +} + +int +TIFFReadScanline(TIFF* tif, void* buf, uint32 row, uint16 sample) +{ + int e; + + if (!TIFFCheckRead(tif, 0)) + return (-1); + if( (e = TIFFSeek(tif, row, sample)) != 0) { + /* + * Decompress desired row into user buffer. + */ + e = (*tif->tif_decoderow) + (tif, (uint8*) buf, tif->tif_scanlinesize, sample); + + /* we are now poised at the beginning of the next row */ + tif->tif_row = row + 1; + + if (e) + (*tif->tif_postdecode)(tif, (uint8*) buf, + tif->tif_scanlinesize); + } + return (e > 0 ? 1 : -1); +} + +/* + * Read a strip of data and decompress the specified + * amount into the user-supplied buffer. + */ +tmsize_t +TIFFReadEncodedStrip(TIFF* tif, uint32 strip, void* buf, tmsize_t size) +{ + static const char module[] = "TIFFReadEncodedStrip"; + TIFFDirectory *td = &tif->tif_dir; + uint32 rowsperstrip; + uint32 stripsperplane; + uint32 stripinplane; + uint16 plane; + uint32 rows; + tmsize_t stripsize; + if (!TIFFCheckRead(tif,0)) + return((tmsize_t)(-1)); + if (strip>=td->td_nstrips) + { + TIFFErrorExt(tif->tif_clientdata,module, + "%lu: Strip out of range, max %lu",(unsigned long)strip, + (unsigned long)td->td_nstrips); + return((tmsize_t)(-1)); + } + /* + * Calculate the strip size according to the number of + * rows in the strip (check for truncated last strip on any + * of the separations). + */ + rowsperstrip=td->td_rowsperstrip; + if (rowsperstrip>td->td_imagelength) + rowsperstrip=td->td_imagelength; + stripsperplane=((td->td_imagelength+rowsperstrip-1)/rowsperstrip); + stripinplane=(strip%stripsperplane); + plane=(strip/stripsperplane); + rows=td->td_imagelength-stripinplane*rowsperstrip; + if (rows>rowsperstrip) + rows=rowsperstrip; + stripsize=TIFFVStripSize(tif,rows); + if (stripsize==0) + return((tmsize_t)(-1)); + if ((size!=(tmsize_t)(-1))&&(sizetif_decodestrip)(tif,buf,stripsize,plane)<=0) + return((tmsize_t)(-1)); + (*tif->tif_postdecode)(tif,buf,stripsize); + return(stripsize); +} + +static tmsize_t +TIFFReadRawStrip1(TIFF* tif, uint32 strip, void* buf, tmsize_t size, + const char* module) +{ + TIFFDirectory *td = &tif->tif_dir; + + if (!_TIFFFillStriles( tif )) + return ((tmsize_t)(-1)); + + assert((tif->tif_flags&TIFF_NOREADRAW)==0); + if (!isMapped(tif)) { + tmsize_t cc; + + if (!SeekOK(tif, td->td_stripoffset[strip])) { + TIFFErrorExt(tif->tif_clientdata, module, + "Seek error at scanline %lu, strip %lu", + (unsigned long) tif->tif_row, (unsigned long) strip); + return ((tmsize_t)(-1)); + } + cc = TIFFReadFile(tif, buf, size); + if (cc != size) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "Read error at scanline %lu; got %I64u bytes, expected %I64u", + (unsigned long) tif->tif_row, + (unsigned __int64) cc, + (unsigned __int64) size); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "Read error at scanline %lu; got %llu bytes, expected %llu", + (unsigned long) tif->tif_row, + (unsigned long long) cc, + (unsigned long long) size); +#endif + return ((tmsize_t)(-1)); + } + } else { + tmsize_t ma,mb; + tmsize_t n; + ma=(tmsize_t)td->td_stripoffset[strip]; + mb=ma+size; + if (((uint64)ma!=td->td_stripoffset[strip])||(ma>tif->tif_size)) + n=0; + else if ((mbtif->tif_size)) + n=tif->tif_size-ma; + else + n=size; + if (n!=size) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "Read error at scanline %lu, strip %lu; got %I64u bytes, expected %I64u", + (unsigned long) tif->tif_row, + (unsigned long) strip, + (unsigned __int64) n, + (unsigned __int64) size); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "Read error at scanline %lu, strip %lu; got %llu bytes, expected %llu", + (unsigned long) tif->tif_row, + (unsigned long) strip, + (unsigned long long) n, + (unsigned long long) size); +#endif + return ((tmsize_t)(-1)); + } + _TIFFmemcpy(buf, tif->tif_base + ma, + size); + } + return (size); +} + +/* + * Read a strip of data from the file. + */ +tmsize_t +TIFFReadRawStrip(TIFF* tif, uint32 strip, void* buf, tmsize_t size) +{ + static const char module[] = "TIFFReadRawStrip"; + TIFFDirectory *td = &tif->tif_dir; + uint64 bytecount; + tmsize_t bytecountm; + + if (!TIFFCheckRead(tif, 0)) + return ((tmsize_t)(-1)); + if (strip >= td->td_nstrips) { + TIFFErrorExt(tif->tif_clientdata, module, + "%lu: Strip out of range, max %lu", + (unsigned long) strip, + (unsigned long) td->td_nstrips); + return ((tmsize_t)(-1)); + } + if (tif->tif_flags&TIFF_NOREADRAW) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Compression scheme does not support access to raw uncompressed data"); + return ((tmsize_t)(-1)); + } + bytecount = td->td_stripbytecount[strip]; + if (bytecount <= 0) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "%I64u: Invalid strip byte count, strip %lu", + (unsigned __int64) bytecount, + (unsigned long) strip); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "%llu: Invalid strip byte count, strip %lu", + (unsigned long long) bytecount, + (unsigned long) strip); +#endif + return ((tmsize_t)(-1)); + } + bytecountm = (tmsize_t)bytecount; + if ((uint64)bytecountm!=bytecount) { + TIFFErrorExt(tif->tif_clientdata, module, "Integer overflow"); + return ((tmsize_t)(-1)); + } + if (size != (tmsize_t)(-1) && size < bytecountm) + bytecountm = size; + return (TIFFReadRawStrip1(tif, strip, buf, bytecountm, module)); +} + +/* + * Read the specified strip and setup for decoding. The data buffer is + * expanded, as necessary, to hold the strip's data. + */ +int +TIFFFillStrip(TIFF* tif, uint32 strip) +{ + static const char module[] = "TIFFFillStrip"; + TIFFDirectory *td = &tif->tif_dir; + + if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) + return 0; + + if ((tif->tif_flags&TIFF_NOREADRAW)==0) + { + uint64 bytecount = td->td_stripbytecount[strip]; + if (bytecount <= 0) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "Invalid strip byte count %I64u, strip %lu", + (unsigned __int64) bytecount, + (unsigned long) strip); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "Invalid strip byte count %llu, strip %lu", + (unsigned long long) bytecount, + (unsigned long) strip); +#endif + return (0); + } + if (isMapped(tif) && + (isFillOrder(tif, td->td_fillorder) + || (tif->tif_flags & TIFF_NOBITREV))) { + /* + * The image is mapped into memory and we either don't + * need to flip bits or the compression routine is + * going to handle this operation itself. In this + * case, avoid copying the raw data and instead just + * reference the data from the memory mapped file + * image. This assumes that the decompression + * routines do not modify the contents of the raw data + * buffer (if they try to, the application will get a + * fault since the file is mapped read-only). + */ + if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) { + _TIFFfree(tif->tif_rawdata); + tif->tif_rawdata = NULL; + tif->tif_rawdatasize = 0; + } + tif->tif_flags &= ~TIFF_MYBUFFER; + /* + * We must check for overflow, potentially causing + * an OOB read. Instead of simple + * + * td->td_stripoffset[strip]+bytecount > tif->tif_size + * + * comparison (which can overflow) we do the following + * two comparisons: + */ + if (bytecount > (uint64)tif->tif_size || + td->td_stripoffset[strip] > (uint64)tif->tif_size - bytecount) { + /* + * This error message might seem strange, but + * it's what would happen if a read were done + * instead. + */ +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + + "Read error on strip %lu; " + "got %I64u bytes, expected %I64u", + (unsigned long) strip, + (unsigned __int64) tif->tif_size - td->td_stripoffset[strip], + (unsigned __int64) bytecount); +#else + TIFFErrorExt(tif->tif_clientdata, module, + + "Read error on strip %lu; " + "got %llu bytes, expected %llu", + (unsigned long) strip, + (unsigned long long) tif->tif_size - td->td_stripoffset[strip], + (unsigned long long) bytecount); +#endif + tif->tif_curstrip = NOSTRIP; + return (0); + } + tif->tif_rawdatasize = (tmsize_t)bytecount; + tif->tif_rawdata = tif->tif_base + (tmsize_t)td->td_stripoffset[strip]; + tif->tif_rawdataoff = 0; + tif->tif_rawdataloaded = (tmsize_t) bytecount; + + /* + * When we have tif_rawdata reference directly into the memory mapped file + * we need to be pretty careful about how we use the rawdata. It is not + * a general purpose working buffer as it normally otherwise is. So we + * keep track of this fact to avoid using it improperly. + */ + tif->tif_flags |= TIFF_BUFFERMMAP; + } else { + /* + * Expand raw data buffer, if needed, to hold data + * strip coming from file (perhaps should set upper + * bound on the size of a buffer we'll use?). + */ + tmsize_t bytecountm; + bytecountm=(tmsize_t)bytecount; + if ((uint64)bytecountm!=bytecount) + { + TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); + return(0); + } + if (bytecountm > tif->tif_rawdatasize) { + tif->tif_curstrip = NOSTRIP; + if ((tif->tif_flags & TIFF_MYBUFFER) == 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "Data buffer too small to hold strip %lu", + (unsigned long) strip); + return (0); + } + if (!TIFFReadBufferSetup(tif, 0, bytecountm)) + return (0); + } + if (tif->tif_flags&TIFF_BUFFERMMAP) { + tif->tif_curstrip = NOSTRIP; + if (!TIFFReadBufferSetup(tif, 0, bytecountm)) + return (0); + } + if (TIFFReadRawStrip1(tif, strip, tif->tif_rawdata, + bytecountm, module) != bytecountm) + return (0); + + tif->tif_rawdataoff = 0; + tif->tif_rawdataloaded = bytecountm; + + if (!isFillOrder(tif, td->td_fillorder) && + (tif->tif_flags & TIFF_NOBITREV) == 0) + TIFFReverseBits(tif->tif_rawdata, bytecountm); + } + } + return (TIFFStartStrip(tif, strip)); +} + +/* + * Tile-oriented Read Support + * Contributed by Nancy Cam (Silicon Graphics). + */ + +/* + * Read and decompress a tile of data. The + * tile is selected by the (x,y,z,s) coordinates. + */ +tmsize_t +TIFFReadTile(TIFF* tif, void* buf, uint32 x, uint32 y, uint32 z, uint16 s) +{ + if (!TIFFCheckRead(tif, 1) || !TIFFCheckTile(tif, x, y, z, s)) + return ((tmsize_t)(-1)); + return (TIFFReadEncodedTile(tif, + TIFFComputeTile(tif, x, y, z, s), buf, (tmsize_t)(-1))); +} + +/* + * Read a tile of data and decompress the specified + * amount into the user-supplied buffer. + */ +tmsize_t +TIFFReadEncodedTile(TIFF* tif, uint32 tile, void* buf, tmsize_t size) +{ + static const char module[] = "TIFFReadEncodedTile"; + TIFFDirectory *td = &tif->tif_dir; + tmsize_t tilesize = tif->tif_tilesize; + + if (!TIFFCheckRead(tif, 1)) + return ((tmsize_t)(-1)); + if (tile >= td->td_nstrips) { + TIFFErrorExt(tif->tif_clientdata, module, + "%lu: Tile out of range, max %lu", + (unsigned long) tile, (unsigned long) td->td_nstrips); + return ((tmsize_t)(-1)); + } + if (size == (tmsize_t)(-1)) + size = tilesize; + else if (size > tilesize) + size = tilesize; + if (TIFFFillTile(tif, tile) && (*tif->tif_decodetile)(tif, + (uint8*) buf, size, (uint16)(tile/td->td_stripsperimage))) { + (*tif->tif_postdecode)(tif, (uint8*) buf, size); + return (size); + } else + return ((tmsize_t)(-1)); +} + +static tmsize_t +TIFFReadRawTile1(TIFF* tif, uint32 tile, void* buf, tmsize_t size, const char* module) +{ + TIFFDirectory *td = &tif->tif_dir; + + if (!_TIFFFillStriles( tif )) + return ((tmsize_t)(-1)); + + assert((tif->tif_flags&TIFF_NOREADRAW)==0); + if (!isMapped(tif)) { + tmsize_t cc; + + if (!SeekOK(tif, td->td_stripoffset[tile])) { + TIFFErrorExt(tif->tif_clientdata, module, + "Seek error at row %lu, col %lu, tile %lu", + (unsigned long) tif->tif_row, + (unsigned long) tif->tif_col, + (unsigned long) tile); + return ((tmsize_t)(-1)); + } + cc = TIFFReadFile(tif, buf, size); + if (cc != size) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "Read error at row %lu, col %lu; got %I64u bytes, expected %I64u", + (unsigned long) tif->tif_row, + (unsigned long) tif->tif_col, + (unsigned __int64) cc, + (unsigned __int64) size); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "Read error at row %lu, col %lu; got %llu bytes, expected %llu", + (unsigned long) tif->tif_row, + (unsigned long) tif->tif_col, + (unsigned long long) cc, + (unsigned long long) size); +#endif + return ((tmsize_t)(-1)); + } + } else { + tmsize_t ma,mb; + tmsize_t n; + ma=(tmsize_t)td->td_stripoffset[tile]; + mb=ma+size; + if (((uint64)ma!=td->td_stripoffset[tile])||(ma>tif->tif_size)) + n=0; + else if ((mbtif->tif_size)) + n=tif->tif_size-ma; + else + n=size; + if (n!=size) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, +"Read error at row %lu, col %lu, tile %lu; got %I64u bytes, expected %I64u", + (unsigned long) tif->tif_row, + (unsigned long) tif->tif_col, + (unsigned long) tile, + (unsigned __int64) n, + (unsigned __int64) size); +#else + TIFFErrorExt(tif->tif_clientdata, module, +"Read error at row %lu, col %lu, tile %lu; got %llu bytes, expected %llu", + (unsigned long) tif->tif_row, + (unsigned long) tif->tif_col, + (unsigned long) tile, + (unsigned long long) n, + (unsigned long long) size); +#endif + return ((tmsize_t)(-1)); + } + _TIFFmemcpy(buf, tif->tif_base + ma, size); + } + return (size); +} + +/* + * Read a tile of data from the file. + */ +tmsize_t +TIFFReadRawTile(TIFF* tif, uint32 tile, void* buf, tmsize_t size) +{ + static const char module[] = "TIFFReadRawTile"; + TIFFDirectory *td = &tif->tif_dir; + uint64 bytecount64; + tmsize_t bytecountm; + + if (!TIFFCheckRead(tif, 1)) + return ((tmsize_t)(-1)); + if (tile >= td->td_nstrips) { + TIFFErrorExt(tif->tif_clientdata, module, + "%lu: Tile out of range, max %lu", + (unsigned long) tile, (unsigned long) td->td_nstrips); + return ((tmsize_t)(-1)); + } + if (tif->tif_flags&TIFF_NOREADRAW) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Compression scheme does not support access to raw uncompressed data"); + return ((tmsize_t)(-1)); + } + bytecount64 = td->td_stripbytecount[tile]; + if (size != (tmsize_t)(-1) && (uint64)size < bytecount64) + bytecount64 = (uint64)size; + bytecountm = (tmsize_t)bytecount64; + if ((uint64)bytecountm!=bytecount64) + { + TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); + return ((tmsize_t)(-1)); + } + return (TIFFReadRawTile1(tif, tile, buf, bytecountm, module)); +} + +/* + * Read the specified tile and setup for decoding. The data buffer is + * expanded, as necessary, to hold the tile's data. + */ +int +TIFFFillTile(TIFF* tif, uint32 tile) +{ + static const char module[] = "TIFFFillTile"; + TIFFDirectory *td = &tif->tif_dir; + + if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) + return 0; + + if ((tif->tif_flags&TIFF_NOREADRAW)==0) + { + uint64 bytecount = td->td_stripbytecount[tile]; + if (bytecount <= 0) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "%I64u: Invalid tile byte count, tile %lu", + (unsigned __int64) bytecount, + (unsigned long) tile); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "%llu: Invalid tile byte count, tile %lu", + (unsigned long long) bytecount, + (unsigned long) tile); +#endif + return (0); + } + if (isMapped(tif) && + (isFillOrder(tif, td->td_fillorder) + || (tif->tif_flags & TIFF_NOBITREV))) { + /* + * The image is mapped into memory and we either don't + * need to flip bits or the compression routine is + * going to handle this operation itself. In this + * case, avoid copying the raw data and instead just + * reference the data from the memory mapped file + * image. This assumes that the decompression + * routines do not modify the contents of the raw data + * buffer (if they try to, the application will get a + * fault since the file is mapped read-only). + */ + if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) { + _TIFFfree(tif->tif_rawdata); + tif->tif_rawdata = NULL; + tif->tif_rawdatasize = 0; + } + tif->tif_flags &= ~TIFF_MYBUFFER; + /* + * We must check for overflow, potentially causing + * an OOB read. Instead of simple + * + * td->td_stripoffset[tile]+bytecount > tif->tif_size + * + * comparison (which can overflow) we do the following + * two comparisons: + */ + if (bytecount > (uint64)tif->tif_size || + td->td_stripoffset[tile] > (uint64)tif->tif_size - bytecount) { + tif->tif_curtile = NOTILE; + return (0); + } + tif->tif_rawdatasize = (tmsize_t)bytecount; + tif->tif_rawdata = + tif->tif_base + (tmsize_t)td->td_stripoffset[tile]; + tif->tif_rawdataoff = 0; + tif->tif_rawdataloaded = (tmsize_t) bytecount; + tif->tif_flags |= TIFF_BUFFERMMAP; + } else { + /* + * Expand raw data buffer, if needed, to hold data + * tile coming from file (perhaps should set upper + * bound on the size of a buffer we'll use?). + */ + tmsize_t bytecountm; + bytecountm=(tmsize_t)bytecount; + if ((uint64)bytecountm!=bytecount) + { + TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); + return(0); + } + if (bytecountm > tif->tif_rawdatasize) { + tif->tif_curtile = NOTILE; + if ((tif->tif_flags & TIFF_MYBUFFER) == 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "Data buffer too small to hold tile %lu", + (unsigned long) tile); + return (0); + } + if (!TIFFReadBufferSetup(tif, 0, bytecountm)) + return (0); + } + if (tif->tif_flags&TIFF_BUFFERMMAP) { + tif->tif_curtile = NOTILE; + if (!TIFFReadBufferSetup(tif, 0, bytecountm)) + return (0); + } + + if (TIFFReadRawTile1(tif, tile, tif->tif_rawdata, + bytecountm, module) != bytecountm) + return (0); + + tif->tif_rawdataoff = 0; + tif->tif_rawdataloaded = bytecountm; + + if (!isFillOrder(tif, td->td_fillorder) && + (tif->tif_flags & TIFF_NOBITREV) == 0) + TIFFReverseBits(tif->tif_rawdata, + tif->tif_rawdataloaded); + } + } + return (TIFFStartTile(tif, tile)); +} + +/* + * Setup the raw data buffer in preparation for + * reading a strip of raw data. If the buffer + * is specified as zero, then a buffer of appropriate + * size is allocated by the library. Otherwise, + * the client must guarantee that the buffer is + * large enough to hold any individual strip of + * raw data. + */ +int +TIFFReadBufferSetup(TIFF* tif, void* bp, tmsize_t size) +{ + static const char module[] = "TIFFReadBufferSetup"; + + assert((tif->tif_flags&TIFF_NOREADRAW)==0); + tif->tif_flags &= ~TIFF_BUFFERMMAP; + + if (tif->tif_rawdata) { + if (tif->tif_flags & TIFF_MYBUFFER) + _TIFFfree(tif->tif_rawdata); + tif->tif_rawdata = NULL; + tif->tif_rawdatasize = 0; + } + if (bp) { + tif->tif_rawdatasize = size; + tif->tif_rawdata = (uint8*) bp; + tif->tif_flags &= ~TIFF_MYBUFFER; + } else { + tif->tif_rawdatasize = (tmsize_t)TIFFroundup_64((uint64)size, 1024); + if (tif->tif_rawdatasize==0) + tif->tif_rawdatasize=(tmsize_t)(-1); + tif->tif_rawdata = (uint8*) _TIFFmalloc(tif->tif_rawdatasize); + tif->tif_flags |= TIFF_MYBUFFER; + } + if (tif->tif_rawdata == NULL) { + TIFFErrorExt(tif->tif_clientdata, module, + "No space for data buffer at scanline %lu", + (unsigned long) tif->tif_row); + tif->tif_rawdatasize = 0; + return (0); + } + return (1); +} + +/* + * Set state to appear as if a + * strip has just been read in. + */ +static int +TIFFStartStrip(TIFF* tif, uint32 strip) +{ + TIFFDirectory *td = &tif->tif_dir; + + if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) + return 0; + + if ((tif->tif_flags & TIFF_CODERSETUP) == 0) { + if (!(*tif->tif_setupdecode)(tif)) + return (0); + tif->tif_flags |= TIFF_CODERSETUP; + } + tif->tif_curstrip = strip; + tif->tif_row = (strip % td->td_stripsperimage) * td->td_rowsperstrip; + tif->tif_flags &= ~TIFF_BUF4WRITE; + + if (tif->tif_flags&TIFF_NOREADRAW) + { + tif->tif_rawcp = NULL; + tif->tif_rawcc = 0; + } + else + { + tif->tif_rawcp = tif->tif_rawdata; + tif->tif_rawcc = (tmsize_t)td->td_stripbytecount[strip]; + } + return ((*tif->tif_predecode)(tif, + (uint16)(strip / td->td_stripsperimage))); +} + +/* + * Set state to appear as if a + * tile has just been read in. + */ +static int +TIFFStartTile(TIFF* tif, uint32 tile) +{ + TIFFDirectory *td = &tif->tif_dir; + + if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) + return 0; + + if ((tif->tif_flags & TIFF_CODERSETUP) == 0) { + if (!(*tif->tif_setupdecode)(tif)) + return (0); + tif->tif_flags |= TIFF_CODERSETUP; + } + tif->tif_curtile = tile; + tif->tif_row = + (tile % TIFFhowmany_32(td->td_imagewidth, td->td_tilewidth)) * + td->td_tilelength; + tif->tif_col = + (tile % TIFFhowmany_32(td->td_imagelength, td->td_tilelength)) * + td->td_tilewidth; + tif->tif_flags &= ~TIFF_BUF4WRITE; + if (tif->tif_flags&TIFF_NOREADRAW) + { + tif->tif_rawcp = NULL; + tif->tif_rawcc = 0; + } + else + { + tif->tif_rawcp = tif->tif_rawdata; + tif->tif_rawcc = (tmsize_t)td->td_stripbytecount[tile]; + } + return ((*tif->tif_predecode)(tif, + (uint16)(tile/td->td_stripsperimage))); +} + +static int +TIFFCheckRead(TIFF* tif, int tiles) +{ + if (tif->tif_mode == O_WRONLY) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, "File not open for reading"); + return (0); + } + if (tiles ^ isTiled(tif)) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, tiles ? + "Can not read tiles from a stripped image" : + "Can not read scanlines from a tiled image"); + return (0); + } + return (1); +} + +void +_TIFFNoPostDecode(TIFF* tif, uint8* buf, tmsize_t cc) +{ + (void) tif; (void) buf; (void) cc; +} + +void +_TIFFSwab16BitData(TIFF* tif, uint8* buf, tmsize_t cc) +{ + (void) tif; + assert((cc & 1) == 0); + TIFFSwabArrayOfShort((uint16*) buf, cc/2); +} + +void +_TIFFSwab24BitData(TIFF* tif, uint8* buf, tmsize_t cc) +{ + (void) tif; + assert((cc % 3) == 0); + TIFFSwabArrayOfTriples((uint8*) buf, cc/3); +} + +void +_TIFFSwab32BitData(TIFF* tif, uint8* buf, tmsize_t cc) +{ + (void) tif; + assert((cc & 3) == 0); + TIFFSwabArrayOfLong((uint32*) buf, cc/4); +} + +void +_TIFFSwab64BitData(TIFF* tif, uint8* buf, tmsize_t cc) +{ + (void) tif; + assert((cc & 7) == 0); + TIFFSwabArrayOfDouble((double*) buf, cc/8); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_stream.cxx b/src/SDL2/external/tiff-4.0.3/libtiff/tif_stream.cxx new file mode 100644 index 000000000..163447ebd --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_stream.cxx @@ -0,0 +1,425 @@ +/* $Id: tif_stream.cxx,v 1.11 2010-12-11 23:12:29 faxguy Exp $ */ + +/* + * Copyright (c) 1988-1996 Sam Leffler + * Copyright (c) 1991-1996 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library UNIX-specific Routines. + */ +#include "tiffiop.h" +#include + +#ifndef __VMS +using namespace std; +#endif + +/* + ISO C++ uses a 'std::streamsize' type to define counts. This makes + it similar to, (but perhaps not the same as) size_t. + + The std::ios::pos_type is used to represent stream positions as used + by tellg(), tellp(), seekg(), and seekp(). This makes it similar to + (but perhaps not the same as) 'off_t'. The std::ios::streampos type + is used for character streams, but is documented to not be an + integral type anymore, so it should *not* be assigned to an integral + type. + + The std::ios::off_type is used to specify relative offsets needed by + the variants of seekg() and seekp() which accept a relative offset + argument. + + Useful prototype knowledge: + + Obtain read position + ios::pos_type basic_istream::tellg() + + Set read position + basic_istream& basic_istream::seekg(ios::pos_type) + basic_istream& basic_istream::seekg(ios::off_type, ios_base::seekdir) + + Read data + basic_istream& istream::read(char *str, streamsize count) + + Number of characters read in last unformatted read + streamsize istream::gcount(); + + Obtain write position + ios::pos_type basic_ostream::tellp() + + Set write position + basic_ostream& basic_ostream::seekp(ios::pos_type) + basic_ostream& basic_ostream::seekp(ios::off_type, ios_base::seekdir) + + Write data + basic_ostream& ostream::write(const char *str, streamsize count) +*/ + +struct tiffis_data; +struct tiffos_data; + +extern "C" { + + static tmsize_t _tiffosReadProc(thandle_t, void*, tmsize_t); + static tmsize_t _tiffisReadProc(thandle_t fd, void* buf, tmsize_t size); + static tmsize_t _tiffosWriteProc(thandle_t fd, void* buf, tmsize_t size); + static tmsize_t _tiffisWriteProc(thandle_t, void*, tmsize_t); + static uint64 _tiffosSeekProc(thandle_t fd, uint64 off, int whence); + static uint64 _tiffisSeekProc(thandle_t fd, uint64 off, int whence); + static uint64 _tiffosSizeProc(thandle_t fd); + static uint64 _tiffisSizeProc(thandle_t fd); + static int _tiffosCloseProc(thandle_t fd); + static int _tiffisCloseProc(thandle_t fd); + static int _tiffDummyMapProc(thandle_t , void** base, toff_t* size ); + static void _tiffDummyUnmapProc(thandle_t , void* base, toff_t size ); + static TIFF* _tiffStreamOpen(const char* name, const char* mode, void *fd); + +struct tiffis_data +{ + istream *stream; + ios::pos_type start_pos; +}; + +struct tiffos_data +{ + ostream *stream; + ios::pos_type start_pos; +}; + +static tmsize_t +_tiffosReadProc(thandle_t, void*, tmsize_t) +{ + return 0; +} + +static tmsize_t +_tiffisReadProc(thandle_t fd, void* buf, tmsize_t size) +{ + tiffis_data *data = reinterpret_cast(fd); + + // Verify that type does not overflow. + streamsize request_size = size; + if (static_cast(request_size) != size) + return static_cast(-1); + + data->stream->read((char *) buf, request_size); + + return static_cast(data->stream->gcount()); +} + +static tmsize_t +_tiffosWriteProc(thandle_t fd, void* buf, tmsize_t size) +{ + tiffos_data *data = reinterpret_cast(fd); + ostream *os = data->stream; + ios::pos_type pos = os->tellp(); + + // Verify that type does not overflow. + streamsize request_size = size; + if (static_cast(request_size) != size) + return static_cast(-1); + + os->write(reinterpret_cast(buf), request_size); + + return static_cast(os->tellp() - pos); +} + +static tmsize_t +_tiffisWriteProc(thandle_t, void*, tmsize_t) +{ + return 0; +} + +static uint64 +_tiffosSeekProc(thandle_t fd, uint64 off, int whence) +{ + tiffos_data *data = reinterpret_cast(fd); + ostream *os = data->stream; + + // if the stream has already failed, don't do anything + if( os->fail() ) + return static_cast(-1); + + switch(whence) { + case SEEK_SET: + { + // Compute 64-bit offset + uint64 new_offset = static_cast(data->start_pos) + off; + + // Verify that value does not overflow + ios::off_type offset = static_cast(new_offset); + if (static_cast(offset) != new_offset) + return static_cast(-1); + + os->seekp(offset, ios::beg); + break; + } + case SEEK_CUR: + { + // Verify that value does not overflow + ios::off_type offset = static_cast(off); + if (static_cast(offset) != off) + return static_cast(-1); + + os->seekp(offset, ios::cur); + break; + } + case SEEK_END: + { + // Verify that value does not overflow + ios::off_type offset = static_cast(off); + if (static_cast(offset) != off) + return static_cast(-1); + + os->seekp(offset, ios::end); + break; + } + } + + // Attempt to workaround problems with seeking past the end of the + // stream. ofstream doesn't have a problem with this but + // ostrstream/ostringstream does. In that situation, add intermediate + // '\0' characters. + if( os->fail() ) { +#ifdef __VMS + int old_state; +#else + ios::iostate old_state; +#endif + ios::pos_type origin; + + old_state = os->rdstate(); + // reset the fail bit or else tellp() won't work below + os->clear(os->rdstate() & ~ios::failbit); + switch( whence ) { + case SEEK_SET: + default: + origin = data->start_pos; + break; + case SEEK_CUR: + origin = os->tellp(); + break; + case SEEK_END: + os->seekp(0, ios::end); + origin = os->tellp(); + break; + } + // restore original stream state + os->clear(old_state); + + // only do something if desired seek position is valid + if( (static_cast(origin) + off) > static_cast(data->start_pos) ) { + uint64 num_fill; + + // clear the fail bit + os->clear(os->rdstate() & ~ios::failbit); + + // extend the stream to the expected size + os->seekp(0, ios::end); + num_fill = (static_cast(origin)) + off - os->tellp(); + for( uint64 i = 0; i < num_fill; i++ ) + os->put('\0'); + + // retry the seek + os->seekp(static_cast(static_cast(origin) + off), ios::beg); + } + } + + return static_cast(os->tellp()); +} + +static uint64 +_tiffisSeekProc(thandle_t fd, uint64 off, int whence) +{ + tiffis_data *data = reinterpret_cast(fd); + + switch(whence) { + case SEEK_SET: + { + // Compute 64-bit offset + uint64 new_offset = static_cast(data->start_pos) + off; + + // Verify that value does not overflow + ios::off_type offset = static_cast(new_offset); + if (static_cast(offset) != new_offset) + return static_cast(-1); + + data->stream->seekg(offset, ios::beg); + break; + } + case SEEK_CUR: + { + // Verify that value does not overflow + ios::off_type offset = static_cast(off); + if (static_cast(offset) != off) + return static_cast(-1); + + data->stream->seekg(offset, ios::cur); + break; + } + case SEEK_END: + { + // Verify that value does not overflow + ios::off_type offset = static_cast(off); + if (static_cast(offset) != off) + return static_cast(-1); + + data->stream->seekg(offset, ios::end); + break; + } + } + + return (uint64) (data->stream->tellg() - data->start_pos); +} + +static uint64 +_tiffosSizeProc(thandle_t fd) +{ + tiffos_data *data = reinterpret_cast(fd); + ostream *os = data->stream; + ios::pos_type pos = os->tellp(); + ios::pos_type len; + + os->seekp(0, ios::end); + len = os->tellp(); + os->seekp(pos); + + return (uint64) len; +} + +static uint64 +_tiffisSizeProc(thandle_t fd) +{ + tiffis_data *data = reinterpret_cast(fd); + ios::pos_type pos = data->stream->tellg(); + ios::pos_type len; + + data->stream->seekg(0, ios::end); + len = data->stream->tellg(); + data->stream->seekg(pos); + + return (uint64) len; +} + +static int +_tiffosCloseProc(thandle_t fd) +{ + // Our stream was not allocated by us, so it shouldn't be closed by us. + delete reinterpret_cast(fd); + return 0; +} + +static int +_tiffisCloseProc(thandle_t fd) +{ + // Our stream was not allocated by us, so it shouldn't be closed by us. + delete reinterpret_cast(fd); + return 0; +} + +static int +_tiffDummyMapProc(thandle_t , void** base, toff_t* size ) +{ + return (0); +} + +static void +_tiffDummyUnmapProc(thandle_t , void* base, toff_t size ) +{ +} + +/* + * Open a TIFF file descriptor for read/writing. + */ +static TIFF* +_tiffStreamOpen(const char* name, const char* mode, void *fd) +{ + TIFF* tif; + + if( strchr(mode, 'w') ) { + tiffos_data *data = new tiffos_data; + data->stream = reinterpret_cast(fd); + data->start_pos = data->stream->tellp(); + + // Open for writing. + tif = TIFFClientOpen(name, mode, + reinterpret_cast(data), + _tiffosReadProc, + _tiffosWriteProc, + _tiffosSeekProc, + _tiffosCloseProc, + _tiffosSizeProc, + _tiffDummyMapProc, + _tiffDummyUnmapProc); + } else { + tiffis_data *data = new tiffis_data; + data->stream = reinterpret_cast(fd); + data->start_pos = data->stream->tellg(); + // Open for reading. + tif = TIFFClientOpen(name, mode, + reinterpret_cast(data), + _tiffisReadProc, + _tiffisWriteProc, + _tiffisSeekProc, + _tiffisCloseProc, + _tiffisSizeProc, + _tiffDummyMapProc, + _tiffDummyUnmapProc); + } + + return (tif); +} + +} /* extern "C" */ + +TIFF* +TIFFStreamOpen(const char* name, ostream *os) +{ + // If os is either a ostrstream or ostringstream, and has no data + // written to it yet, then tellp() will return -1 which will break us. + // We workaround this by writing out a dummy character and + // then seek back to the beginning. + if( !os->fail() && static_cast(os->tellp()) < 0 ) { + *os << '\0'; + os->seekp(0); + } + + // NB: We don't support mapped files with streams so add 'm' + return _tiffStreamOpen(name, "wm", os); +} + +TIFF* +TIFFStreamOpen(const char* name, istream *is) +{ + // NB: We don't support mapped files with streams so add 'm' + return _tiffStreamOpen(name, "rm", is); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + Local Variables: + mode: c + indent-tabs-mode: true + c-basic-offset: 8 + End: +*/ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_strip.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_strip.c new file mode 100644 index 000000000..568e4898d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_strip.c @@ -0,0 +1,383 @@ +/* $Id: tif_strip.c,v 1.35 2012-06-06 05:33:55 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1991-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * Strip-organized Image Support Routines. + */ +#include "tiffiop.h" + +/* + * Compute which strip a (row,sample) value is in. + */ +uint32 +TIFFComputeStrip(TIFF* tif, uint32 row, uint16 sample) +{ + static const char module[] = "TIFFComputeStrip"; + TIFFDirectory *td = &tif->tif_dir; + uint32 strip; + + strip = row / td->td_rowsperstrip; + if (td->td_planarconfig == PLANARCONFIG_SEPARATE) { + if (sample >= td->td_samplesperpixel) { + TIFFErrorExt(tif->tif_clientdata, module, + "%lu: Sample out of range, max %lu", + (unsigned long) sample, (unsigned long) td->td_samplesperpixel); + return (0); + } + strip += (uint32)sample*td->td_stripsperimage; + } + return (strip); +} + +/* + * Compute how many strips are in an image. + */ +uint32 +TIFFNumberOfStrips(TIFF* tif) +{ + TIFFDirectory *td = &tif->tif_dir; + uint32 nstrips; + + nstrips = (td->td_rowsperstrip == (uint32) -1 ? 1 : + TIFFhowmany_32(td->td_imagelength, td->td_rowsperstrip)); + if (td->td_planarconfig == PLANARCONFIG_SEPARATE) + nstrips = _TIFFMultiply32(tif, nstrips, (uint32)td->td_samplesperpixel, + "TIFFNumberOfStrips"); + return (nstrips); +} + +/* + * Compute the # bytes in a variable height, row-aligned strip. + */ +uint64 +TIFFVStripSize64(TIFF* tif, uint32 nrows) +{ + static const char module[] = "TIFFVStripSize64"; + TIFFDirectory *td = &tif->tif_dir; + if (nrows==(uint32)(-1)) + nrows=td->td_imagelength; + if ((td->td_planarconfig==PLANARCONFIG_CONTIG)&& + (td->td_photometric == PHOTOMETRIC_YCBCR)&& + (!isUpSampled(tif))) + { + /* + * Packed YCbCr data contain one Cb+Cr for every + * HorizontalSampling*VerticalSampling Y values. + * Must also roundup width and height when calculating + * since images that are not a multiple of the + * horizontal/vertical subsampling area include + * YCbCr data for the extended image. + */ + uint16 ycbcrsubsampling[2]; + uint16 samplingblock_samples; + uint32 samplingblocks_hor; + uint32 samplingblocks_ver; + uint64 samplingrow_samples; + uint64 samplingrow_size; + if(td->td_samplesperpixel!=3) + { + TIFFErrorExt(tif->tif_clientdata,module, + "Invalid td_samplesperpixel value"); + return 0; + } + TIFFGetFieldDefaulted(tif,TIFFTAG_YCBCRSUBSAMPLING,ycbcrsubsampling+0, + ycbcrsubsampling+1); + if ((ycbcrsubsampling[0] != 1 && ycbcrsubsampling[0] != 2 && ycbcrsubsampling[0] != 4) + ||(ycbcrsubsampling[1] != 1 && ycbcrsubsampling[1] != 2 && ycbcrsubsampling[1] != 4)) + { + TIFFErrorExt(tif->tif_clientdata,module, + "Invalid YCbCr subsampling (%dx%d)", + ycbcrsubsampling[0], + ycbcrsubsampling[1] ); + return 0; + } + samplingblock_samples=ycbcrsubsampling[0]*ycbcrsubsampling[1]+2; + samplingblocks_hor=TIFFhowmany_32(td->td_imagewidth,ycbcrsubsampling[0]); + samplingblocks_ver=TIFFhowmany_32(nrows,ycbcrsubsampling[1]); + samplingrow_samples=_TIFFMultiply64(tif,samplingblocks_hor,samplingblock_samples,module); + samplingrow_size=TIFFhowmany8_64(_TIFFMultiply64(tif,samplingrow_samples,td->td_bitspersample,module)); + return(_TIFFMultiply64(tif,samplingrow_size,samplingblocks_ver,module)); + } + else + return(_TIFFMultiply64(tif,nrows,TIFFScanlineSize64(tif),module)); +} +tmsize_t +TIFFVStripSize(TIFF* tif, uint32 nrows) +{ + static const char module[] = "TIFFVStripSize"; + uint64 m; + tmsize_t n; + m=TIFFVStripSize64(tif,nrows); + n=(tmsize_t)m; + if ((uint64)n!=m) + { + TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); + n=0; + } + return(n); +} + +/* + * Compute the # bytes in a raw strip. + */ +uint64 +TIFFRawStripSize64(TIFF* tif, uint32 strip) +{ + static const char module[] = "TIFFRawStripSize64"; + TIFFDirectory* td = &tif->tif_dir; + uint64 bytecount = td->td_stripbytecount[strip]; + + if (bytecount == 0) + { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "%I64u: Invalid strip byte count, strip %lu", + (unsigned __int64) bytecount, + (unsigned long) strip); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "%llu: Invalid strip byte count, strip %lu", + (unsigned long long) bytecount, + (unsigned long) strip); +#endif + bytecount = (uint64) -1; + } + + return bytecount; +} +tmsize_t +TIFFRawStripSize(TIFF* tif, uint32 strip) +{ + static const char module[] = "TIFFRawStripSize"; + uint64 m; + tmsize_t n; + m=TIFFRawStripSize64(tif,strip); + if (m==(uint64)(-1)) + n=(tmsize_t)(-1); + else + { + n=(tmsize_t)m; + if ((uint64)n!=m) + { + TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); + n=0; + } + } + return(n); +} + +/* + * Compute the # bytes in a (row-aligned) strip. + * + * Note that if RowsPerStrip is larger than the + * recorded ImageLength, then the strip size is + * truncated to reflect the actual space required + * to hold the strip. + */ +uint64 +TIFFStripSize64(TIFF* tif) +{ + TIFFDirectory* td = &tif->tif_dir; + uint32 rps = td->td_rowsperstrip; + if (rps > td->td_imagelength) + rps = td->td_imagelength; + return (TIFFVStripSize64(tif, rps)); +} +tmsize_t +TIFFStripSize(TIFF* tif) +{ + static const char module[] = "TIFFStripSize"; + uint64 m; + tmsize_t n; + m=TIFFStripSize64(tif); + n=(tmsize_t)m; + if ((uint64)n!=m) + { + TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); + n=0; + } + return(n); +} + +/* + * Compute a default strip size based on the image + * characteristics and a requested value. If the + * request is <1 then we choose a strip size according + * to certain heuristics. + */ +uint32 +TIFFDefaultStripSize(TIFF* tif, uint32 request) +{ + return (*tif->tif_defstripsize)(tif, request); +} + +uint32 +_TIFFDefaultStripSize(TIFF* tif, uint32 s) +{ + if ((int32) s < 1) { + /* + * If RowsPerStrip is unspecified, try to break the + * image up into strips that are approximately + * STRIP_SIZE_DEFAULT bytes long. + */ + uint64 scanlinesize; + uint64 rows; + scanlinesize=TIFFScanlineSize64(tif); + if (scanlinesize==0) + scanlinesize=1; + rows=(uint64)STRIP_SIZE_DEFAULT/scanlinesize; + if (rows==0) + rows=1; + else if (rows>0xFFFFFFFF) + rows=0xFFFFFFFF; + s=(uint32)rows; + } + return (s); +} + +/* + * Return the number of bytes to read/write in a call to + * one of the scanline-oriented i/o routines. Note that + * this number may be 1/samples-per-pixel if data is + * stored as separate planes. + * The ScanlineSize in case of YCbCrSubsampling is defined as the + * strip size divided by the strip height, i.e. the size of a pack of vertical + * subsampling lines divided by vertical subsampling. It should thus make + * sense when multiplied by a multiple of vertical subsampling. + */ +uint64 +TIFFScanlineSize64(TIFF* tif) +{ + static const char module[] = "TIFFScanlineSize64"; + TIFFDirectory *td = &tif->tif_dir; + uint64 scanline_size; + if (td->td_planarconfig==PLANARCONFIG_CONTIG) + { + if ((td->td_photometric==PHOTOMETRIC_YCBCR)&& + (td->td_samplesperpixel==3)&& + (!isUpSampled(tif))) + { + uint16 ycbcrsubsampling[2]; + uint16 samplingblock_samples; + uint32 samplingblocks_hor; + uint64 samplingrow_samples; + uint64 samplingrow_size; + if(td->td_samplesperpixel!=3) + { + TIFFErrorExt(tif->tif_clientdata,module, + "Invalid td_samplesperpixel value"); + return 0; + } + TIFFGetFieldDefaulted(tif,TIFFTAG_YCBCRSUBSAMPLING, + ycbcrsubsampling+0, + ycbcrsubsampling+1); + if (((ycbcrsubsampling[0]!=1)&&(ycbcrsubsampling[0]!=2)&&(ycbcrsubsampling[0]!=4)) || + ((ycbcrsubsampling[1]!=1)&&(ycbcrsubsampling[1]!=2)&&(ycbcrsubsampling[1]!=4))) + { + TIFFErrorExt(tif->tif_clientdata,module, + "Invalid YCbCr subsampling"); + return 0; + } + samplingblock_samples = ycbcrsubsampling[0]*ycbcrsubsampling[1]+2; + samplingblocks_hor = TIFFhowmany_32(td->td_imagewidth,ycbcrsubsampling[0]); + samplingrow_samples = _TIFFMultiply64(tif,samplingblocks_hor,samplingblock_samples,module); + samplingrow_size = TIFFhowmany_64(_TIFFMultiply64(tif,samplingrow_samples,td->td_bitspersample,module),8); + scanline_size = (samplingrow_size/ycbcrsubsampling[1]); + } + else + { + uint64 scanline_samples; + scanline_samples=_TIFFMultiply64(tif,td->td_imagewidth,td->td_samplesperpixel,module); + scanline_size=TIFFhowmany_64(_TIFFMultiply64(tif,scanline_samples,td->td_bitspersample,module),8); + } + } + else + scanline_size=TIFFhowmany_64(_TIFFMultiply64(tif,td->td_imagewidth,td->td_bitspersample,module),8); + return(scanline_size); +} +tmsize_t +TIFFScanlineSize(TIFF* tif) +{ + static const char module[] = "TIFFScanlineSize"; + uint64 m; + tmsize_t n; + m=TIFFScanlineSize64(tif); + n=(tmsize_t)m; + if ((uint64)n!=m) + { + TIFFErrorExt(tif->tif_clientdata,module,"Integer arithmetic overflow"); + n=0; + } + return(n); +} + +/* + * Return the number of bytes required to store a complete + * decoded and packed raster scanline (as opposed to the + * I/O size returned by TIFFScanlineSize which may be less + * if data is store as separate planes). + */ +uint64 +TIFFRasterScanlineSize64(TIFF* tif) +{ + static const char module[] = "TIFFRasterScanlineSize64"; + TIFFDirectory *td = &tif->tif_dir; + uint64 scanline; + + scanline = _TIFFMultiply64(tif, td->td_bitspersample, td->td_imagewidth, module); + if (td->td_planarconfig == PLANARCONFIG_CONTIG) { + scanline = _TIFFMultiply64(tif, scanline, td->td_samplesperpixel, module); + return (TIFFhowmany8_64(scanline)); + } else + return (_TIFFMultiply64(tif, TIFFhowmany8_64(scanline), + td->td_samplesperpixel, module)); +} +tmsize_t +TIFFRasterScanlineSize(TIFF* tif) +{ + static const char module[] = "TIFFRasterScanlineSize"; + uint64 m; + tmsize_t n; + m=TIFFRasterScanlineSize64(tif); + n=(tmsize_t)m; + if ((uint64)n!=m) + { + TIFFErrorExt(tif->tif_clientdata,module,"Integer arithmetic overflow"); + n=0; + } + return(n); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_swab.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_swab.c new file mode 100644 index 000000000..f37e33f1c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_swab.c @@ -0,0 +1,310 @@ +/* $Id: tif_swab.c,v 1.13 2010-03-10 18:56:49 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library Bit & Byte Swapping Support. + * + * XXX We assume short = 16-bits and long = 32-bits XXX + */ +#include "tiffiop.h" + +#ifndef TIFFSwabShort +void +TIFFSwabShort(uint16* wp) +{ + register unsigned char* cp = (unsigned char*) wp; + unsigned char t; + assert(sizeof(uint16)==2); + t = cp[1]; cp[1] = cp[0]; cp[0] = t; +} +#endif + +#ifndef TIFFSwabLong +void +TIFFSwabLong(uint32* lp) +{ + register unsigned char* cp = (unsigned char*) lp; + unsigned char t; + assert(sizeof(uint32)==4); + t = cp[3]; cp[3] = cp[0]; cp[0] = t; + t = cp[2]; cp[2] = cp[1]; cp[1] = t; +} +#endif + +#ifndef TIFFSwabLong8 +void +TIFFSwabLong8(uint64* lp) +{ + register unsigned char* cp = (unsigned char*) lp; + unsigned char t; + assert(sizeof(uint64)==8); + t = cp[7]; cp[7] = cp[0]; cp[0] = t; + t = cp[6]; cp[6] = cp[1]; cp[1] = t; + t = cp[5]; cp[5] = cp[2]; cp[2] = t; + t = cp[4]; cp[4] = cp[3]; cp[3] = t; +} +#endif + +#ifndef TIFFSwabArrayOfShort +void +TIFFSwabArrayOfShort(register uint16* wp, tmsize_t n) +{ + register unsigned char* cp; + register unsigned char t; + assert(sizeof(uint16)==2); + /* XXX unroll loop some */ + while (n-- > 0) { + cp = (unsigned char*) wp; + t = cp[1]; cp[1] = cp[0]; cp[0] = t; + wp++; + } +} +#endif + +#ifndef TIFFSwabArrayOfTriples +void +TIFFSwabArrayOfTriples(register uint8* tp, tmsize_t n) +{ + unsigned char* cp; + unsigned char t; + + /* XXX unroll loop some */ + while (n-- > 0) { + cp = (unsigned char*) tp; + t = cp[2]; cp[2] = cp[0]; cp[0] = t; + tp += 3; + } +} +#endif + +#ifndef TIFFSwabArrayOfLong +void +TIFFSwabArrayOfLong(register uint32* lp, tmsize_t n) +{ + register unsigned char *cp; + register unsigned char t; + assert(sizeof(uint32)==4); + /* XXX unroll loop some */ + while (n-- > 0) { + cp = (unsigned char *)lp; + t = cp[3]; cp[3] = cp[0]; cp[0] = t; + t = cp[2]; cp[2] = cp[1]; cp[1] = t; + lp++; + } +} +#endif + +#ifndef TIFFSwabArrayOfLong8 +void +TIFFSwabArrayOfLong8(register uint64* lp, tmsize_t n) +{ + register unsigned char *cp; + register unsigned char t; + assert(sizeof(uint64)==8); + /* XXX unroll loop some */ + while (n-- > 0) { + cp = (unsigned char *)lp; + t = cp[7]; cp[7] = cp[0]; cp[0] = t; + t = cp[6]; cp[6] = cp[1]; cp[1] = t; + t = cp[5]; cp[5] = cp[2]; cp[2] = t; + t = cp[4]; cp[4] = cp[3]; cp[3] = t; + lp++; + } +} +#endif + +#ifndef TIFFSwabFloat +void +TIFFSwabFloat(float* fp) +{ + register unsigned char* cp = (unsigned char*) fp; + unsigned char t; + assert(sizeof(float)==4); + t = cp[3]; cp[3] = cp[0]; cp[0] = t; + t = cp[2]; cp[2] = cp[1]; cp[1] = t; +} +#endif + +#ifndef TIFFSwabArrayOfFloat +void +TIFFSwabArrayOfFloat(register float* fp, tmsize_t n) +{ + register unsigned char *cp; + register unsigned char t; + assert(sizeof(float)==4); + /* XXX unroll loop some */ + while (n-- > 0) { + cp = (unsigned char *)fp; + t = cp[3]; cp[3] = cp[0]; cp[0] = t; + t = cp[2]; cp[2] = cp[1]; cp[1] = t; + fp++; + } +} +#endif + +#ifndef TIFFSwabDouble +void +TIFFSwabDouble(double *dp) +{ + register unsigned char* cp = (unsigned char*) dp; + unsigned char t; + assert(sizeof(double)==8); + t = cp[7]; cp[7] = cp[0]; cp[0] = t; + t = cp[6]; cp[6] = cp[1]; cp[1] = t; + t = cp[5]; cp[5] = cp[2]; cp[2] = t; + t = cp[4]; cp[4] = cp[3]; cp[3] = t; +} +#endif + +#ifndef TIFFSwabArrayOfDouble +void +TIFFSwabArrayOfDouble(double* dp, tmsize_t n) +{ + register unsigned char *cp; + register unsigned char t; + assert(sizeof(double)==8); + /* XXX unroll loop some */ + while (n-- > 0) { + cp = (unsigned char *)dp; + t = cp[7]; cp[7] = cp[0]; cp[0] = t; + t = cp[6]; cp[6] = cp[1]; cp[1] = t; + t = cp[5]; cp[5] = cp[2]; cp[2] = t; + t = cp[4]; cp[4] = cp[3]; cp[3] = t; + dp++; + } +} +#endif + +/* + * Bit reversal tables. TIFFBitRevTable[] gives + * the bit reversed value of . Used in various + * places in the library when the FillOrder requires + * bit reversal of byte values (e.g. CCITT Fax 3 + * encoding/decoding). TIFFNoBitRevTable is provided + * for algorithms that want an equivalent table that + * do not reverse bit values. + */ +static const unsigned char TIFFBitRevTable[256] = { + 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, + 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0, + 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8, + 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, + 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, + 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4, + 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec, + 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, + 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, + 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2, + 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea, + 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, + 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6, + 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6, + 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, + 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, + 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1, + 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1, + 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, + 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, + 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5, + 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5, + 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, + 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, + 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3, + 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, + 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, + 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb, + 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7, + 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, + 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, + 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff +}; +static const unsigned char TIFFNoBitRevTable[256] = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, + 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, + 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, + 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, + 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, + 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, + 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, + 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, + 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, + 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, + 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f, + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, + 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, + 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, + 0xb8, 0xb9, 0xba, 0xbb, 0xbc, 0xbd, 0xbe, 0xbf, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, + 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, + 0xd8, 0xd9, 0xda, 0xdb, 0xdc, 0xdd, 0xde, 0xdf, + 0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, + 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef, + 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, + 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff, +}; + +const unsigned char* +TIFFGetBitRevTable(int reversed) +{ + return (reversed ? TIFFBitRevTable : TIFFNoBitRevTable); +} + +void +TIFFReverseBits(uint8* cp, tmsize_t n) +{ + for (; n > 8; n -= 8) { + cp[0] = TIFFBitRevTable[cp[0]]; + cp[1] = TIFFBitRevTable[cp[1]]; + cp[2] = TIFFBitRevTable[cp[2]]; + cp[3] = TIFFBitRevTable[cp[3]]; + cp[4] = TIFFBitRevTable[cp[4]]; + cp[5] = TIFFBitRevTable[cp[5]]; + cp[6] = TIFFBitRevTable[cp[6]]; + cp[7] = TIFFBitRevTable[cp[7]]; + cp += 8; + } + while (n-- > 0) + *cp = TIFFBitRevTable[*cp], cp++; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_thunder.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_thunder.c new file mode 100644 index 000000000..390891c98 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_thunder.c @@ -0,0 +1,207 @@ +/* $Id: tif_thunder.c,v 1.12 2011-04-02 20:54:09 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tiffiop.h" +#include +#ifdef THUNDER_SUPPORT +/* + * TIFF Library. + * + * ThunderScan 4-bit Compression Algorithm Support + */ + +/* + * ThunderScan uses an encoding scheme designed for + * 4-bit pixel values. Data is encoded in bytes, with + * each byte split into a 2-bit code word and a 6-bit + * data value. The encoding gives raw data, runs of + * pixels, or pixel values encoded as a delta from the + * previous pixel value. For the latter, either 2-bit + * or 3-bit delta values are used, with the deltas packed + * into a single byte. + */ +#define THUNDER_DATA 0x3f /* mask for 6-bit data */ +#define THUNDER_CODE 0xc0 /* mask for 2-bit code word */ +/* code values */ +#define THUNDER_RUN 0x00 /* run of pixels w/ encoded count */ +#define THUNDER_2BITDELTAS 0x40 /* 3 pixels w/ encoded 2-bit deltas */ +#define DELTA2_SKIP 2 /* skip code for 2-bit deltas */ +#define THUNDER_3BITDELTAS 0x80 /* 2 pixels w/ encoded 3-bit deltas */ +#define DELTA3_SKIP 4 /* skip code for 3-bit deltas */ +#define THUNDER_RAW 0xc0 /* raw data encoded */ + +static const int twobitdeltas[4] = { 0, 1, 0, -1 }; +static const int threebitdeltas[8] = { 0, 1, 2, 3, 0, -3, -2, -1 }; + +#define SETPIXEL(op, v) { \ + lastpixel = (v) & 0xf; \ + if ( npixels < maxpixels ) \ + { \ + if (npixels++ & 1) \ + *op++ |= lastpixel; \ + else \ + op[0] = (uint8) (lastpixel << 4); \ + } \ +} + +static int +ThunderSetupDecode(TIFF* tif) +{ + static const char module[] = "ThunderSetupDecode"; + + if( tif->tif_dir.td_bitspersample != 4 ) + { + TIFFErrorExt(tif->tif_clientdata, module, + "Wrong bitspersample value (%d), Thunder decoder only supports 4bits per sample.", + (int) tif->tif_dir.td_bitspersample ); + return 0; + } + + + return (1); +} + +static int +ThunderDecode(TIFF* tif, uint8* op, tmsize_t maxpixels) +{ + static const char module[] = "ThunderDecode"; + register unsigned char *bp; + register tmsize_t cc; + unsigned int lastpixel; + tmsize_t npixels; + + bp = (unsigned char *)tif->tif_rawcp; + cc = tif->tif_rawcc; + lastpixel = 0; + npixels = 0; + while (cc > 0 && npixels < maxpixels) { + int n, delta; + + n = *bp++, cc--; + switch (n & THUNDER_CODE) { + case THUNDER_RUN: /* pixel run */ + /* + * Replicate the last pixel n times, + * where n is the lower-order 6 bits. + */ + if (npixels & 1) { + op[0] |= lastpixel; + lastpixel = *op++; npixels++; n--; + } else + lastpixel |= lastpixel << 4; + npixels += n; + if (npixels < maxpixels) { + for (; n > 0; n -= 2) + *op++ = (uint8) lastpixel; + } + if (n == -1) + *--op &= 0xf0; + lastpixel &= 0xf; + break; + case THUNDER_2BITDELTAS: /* 2-bit deltas */ + if ((delta = ((n >> 4) & 3)) != DELTA2_SKIP) + SETPIXEL(op, lastpixel + twobitdeltas[delta]); + if ((delta = ((n >> 2) & 3)) != DELTA2_SKIP) + SETPIXEL(op, lastpixel + twobitdeltas[delta]); + if ((delta = (n & 3)) != DELTA2_SKIP) + SETPIXEL(op, lastpixel + twobitdeltas[delta]); + break; + case THUNDER_3BITDELTAS: /* 3-bit deltas */ + if ((delta = ((n >> 3) & 7)) != DELTA3_SKIP) + SETPIXEL(op, lastpixel + threebitdeltas[delta]); + if ((delta = (n & 7)) != DELTA3_SKIP) + SETPIXEL(op, lastpixel + threebitdeltas[delta]); + break; + case THUNDER_RAW: /* raw data */ + SETPIXEL(op, n); + break; + } + } + tif->tif_rawcp = (uint8*) bp; + tif->tif_rawcc = cc; + if (npixels != maxpixels) { +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + TIFFErrorExt(tif->tif_clientdata, module, + "%s data at scanline %lu (%I64u != %I64u)", + npixels < maxpixels ? "Not enough" : "Too much", + (unsigned long) tif->tif_row, + (unsigned __int64) npixels, + (unsigned __int64) maxpixels); +#else + TIFFErrorExt(tif->tif_clientdata, module, + "%s data at scanline %lu (%llu != %llu)", + npixels < maxpixels ? "Not enough" : "Too much", + (unsigned long) tif->tif_row, + (unsigned long long) npixels, + (unsigned long long) maxpixels); +#endif + return (0); + } + + return (1); +} + +static int +ThunderDecodeRow(TIFF* tif, uint8* buf, tmsize_t occ, uint16 s) +{ + static const char module[] = "ThunderDecodeRow"; + uint8* row = buf; + + (void) s; + if (occ % tif->tif_scanlinesize) + { + TIFFErrorExt(tif->tif_clientdata, module, "Fractional scanlines cannot be read"); + return (0); + } + while (occ > 0) { + if (!ThunderDecode(tif, row, tif->tif_dir.td_imagewidth)) + return (0); + occ -= tif->tif_scanlinesize; + row += tif->tif_scanlinesize; + } + return (1); +} + +int +TIFFInitThunderScan(TIFF* tif, int scheme) +{ + (void) scheme; + + tif->tif_setupdecode = ThunderSetupDecode; + tif->tif_decoderow = ThunderDecodeRow; + tif->tif_decodestrip = ThunderDecodeRow; + return (1); +} +#endif /* THUNDER_SUPPORT */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_tile.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_tile.c new file mode 100644 index 000000000..0ff7e8535 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_tile.c @@ -0,0 +1,299 @@ +/* $Id: tif_tile.c,v 1.23 2012-06-06 05:33:55 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1991-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * Tiled Image Support Routines. + */ +#include "tiffiop.h" + +/* + * Compute which tile an (x,y,z,s) value is in. + */ +uint32 +TIFFComputeTile(TIFF* tif, uint32 x, uint32 y, uint32 z, uint16 s) +{ + TIFFDirectory *td = &tif->tif_dir; + uint32 dx = td->td_tilewidth; + uint32 dy = td->td_tilelength; + uint32 dz = td->td_tiledepth; + uint32 tile = 1; + + if (td->td_imagedepth == 1) + z = 0; + if (dx == (uint32) -1) + dx = td->td_imagewidth; + if (dy == (uint32) -1) + dy = td->td_imagelength; + if (dz == (uint32) -1) + dz = td->td_imagedepth; + if (dx != 0 && dy != 0 && dz != 0) { + uint32 xpt = TIFFhowmany_32(td->td_imagewidth, dx); + uint32 ypt = TIFFhowmany_32(td->td_imagelength, dy); + uint32 zpt = TIFFhowmany_32(td->td_imagedepth, dz); + + if (td->td_planarconfig == PLANARCONFIG_SEPARATE) + tile = (xpt*ypt*zpt)*s + + (xpt*ypt)*(z/dz) + + xpt*(y/dy) + + x/dx; + else + tile = (xpt*ypt)*(z/dz) + xpt*(y/dy) + x/dx; + } + return (tile); +} + +/* + * Check an (x,y,z,s) coordinate + * against the image bounds. + */ +int +TIFFCheckTile(TIFF* tif, uint32 x, uint32 y, uint32 z, uint16 s) +{ + TIFFDirectory *td = &tif->tif_dir; + + if (x >= td->td_imagewidth) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "%lu: Col out of range, max %lu", + (unsigned long) x, + (unsigned long) (td->td_imagewidth - 1)); + return (0); + } + if (y >= td->td_imagelength) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "%lu: Row out of range, max %lu", + (unsigned long) y, + (unsigned long) (td->td_imagelength - 1)); + return (0); + } + if (z >= td->td_imagedepth) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "%lu: Depth out of range, max %lu", + (unsigned long) z, + (unsigned long) (td->td_imagedepth - 1)); + return (0); + } + if (td->td_planarconfig == PLANARCONFIG_SEPARATE && + s >= td->td_samplesperpixel) { + TIFFErrorExt(tif->tif_clientdata, tif->tif_name, + "%lu: Sample out of range, max %lu", + (unsigned long) s, + (unsigned long) (td->td_samplesperpixel - 1)); + return (0); + } + return (1); +} + +/* + * Compute how many tiles are in an image. + */ +uint32 +TIFFNumberOfTiles(TIFF* tif) +{ + TIFFDirectory *td = &tif->tif_dir; + uint32 dx = td->td_tilewidth; + uint32 dy = td->td_tilelength; + uint32 dz = td->td_tiledepth; + uint32 ntiles; + + if (dx == (uint32) -1) + dx = td->td_imagewidth; + if (dy == (uint32) -1) + dy = td->td_imagelength; + if (dz == (uint32) -1) + dz = td->td_imagedepth; + ntiles = (dx == 0 || dy == 0 || dz == 0) ? 0 : + _TIFFMultiply32(tif, _TIFFMultiply32(tif, TIFFhowmany_32(td->td_imagewidth, dx), + TIFFhowmany_32(td->td_imagelength, dy), + "TIFFNumberOfTiles"), + TIFFhowmany_32(td->td_imagedepth, dz), "TIFFNumberOfTiles"); + if (td->td_planarconfig == PLANARCONFIG_SEPARATE) + ntiles = _TIFFMultiply32(tif, ntiles, td->td_samplesperpixel, + "TIFFNumberOfTiles"); + return (ntiles); +} + +/* + * Compute the # bytes in each row of a tile. + */ +uint64 +TIFFTileRowSize64(TIFF* tif) +{ + TIFFDirectory *td = &tif->tif_dir; + uint64 rowsize; + + if (td->td_tilelength == 0 || td->td_tilewidth == 0) + return (0); + rowsize = _TIFFMultiply64(tif, td->td_bitspersample, td->td_tilewidth, + "TIFFTileRowSize"); + if (td->td_planarconfig == PLANARCONFIG_CONTIG) + rowsize = _TIFFMultiply64(tif, rowsize, td->td_samplesperpixel, + "TIFFTileRowSize"); + return (TIFFhowmany8_64(rowsize)); +} +tmsize_t +TIFFTileRowSize(TIFF* tif) +{ + static const char module[] = "TIFFTileRowSize"; + uint64 m; + tmsize_t n; + m=TIFFTileRowSize64(tif); + n=(tmsize_t)m; + if ((uint64)n!=m) + { + TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); + n=0; + } + return(n); +} + +/* + * Compute the # bytes in a variable length, row-aligned tile. + */ +uint64 +TIFFVTileSize64(TIFF* tif, uint32 nrows) +{ + static const char module[] = "TIFFVTileSize64"; + TIFFDirectory *td = &tif->tif_dir; + if (td->td_tilelength == 0 || td->td_tilewidth == 0 || + td->td_tiledepth == 0) + return (0); + if ((td->td_planarconfig==PLANARCONFIG_CONTIG)&& + (td->td_photometric==PHOTOMETRIC_YCBCR)&& + (td->td_samplesperpixel==3)&& + (!isUpSampled(tif))) + { + /* + * Packed YCbCr data contain one Cb+Cr for every + * HorizontalSampling*VerticalSampling Y values. + * Must also roundup width and height when calculating + * since images that are not a multiple of the + * horizontal/vertical subsampling area include + * YCbCr data for the extended image. + */ + uint16 ycbcrsubsampling[2]; + uint16 samplingblock_samples; + uint32 samplingblocks_hor; + uint32 samplingblocks_ver; + uint64 samplingrow_samples; + uint64 samplingrow_size; + TIFFGetFieldDefaulted(tif,TIFFTAG_YCBCRSUBSAMPLING,ycbcrsubsampling+0, + ycbcrsubsampling+1); + if ((ycbcrsubsampling[0] != 1 && ycbcrsubsampling[0] != 2 && ycbcrsubsampling[0] != 4) + ||(ycbcrsubsampling[1] != 1 && ycbcrsubsampling[1] != 2 && ycbcrsubsampling[1] != 4)) + { + TIFFErrorExt(tif->tif_clientdata,module, + "Invalid YCbCr subsampling (%dx%d)", + ycbcrsubsampling[0], + ycbcrsubsampling[1] ); + return 0; + } + samplingblock_samples=ycbcrsubsampling[0]*ycbcrsubsampling[1]+2; + samplingblocks_hor=TIFFhowmany_32(td->td_tilewidth,ycbcrsubsampling[0]); + samplingblocks_ver=TIFFhowmany_32(nrows,ycbcrsubsampling[1]); + samplingrow_samples=_TIFFMultiply64(tif,samplingblocks_hor,samplingblock_samples,module); + samplingrow_size=TIFFhowmany8_64(_TIFFMultiply64(tif,samplingrow_samples,td->td_bitspersample,module)); + return(_TIFFMultiply64(tif,samplingrow_size,samplingblocks_ver,module)); + } + else + return(_TIFFMultiply64(tif,nrows,TIFFTileRowSize64(tif),module)); +} +tmsize_t +TIFFVTileSize(TIFF* tif, uint32 nrows) +{ + static const char module[] = "TIFFVTileSize"; + uint64 m; + tmsize_t n; + m=TIFFVTileSize64(tif,nrows); + n=(tmsize_t)m; + if ((uint64)n!=m) + { + TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); + n=0; + } + return(n); +} + +/* + * Compute the # bytes in a row-aligned tile. + */ +uint64 +TIFFTileSize64(TIFF* tif) +{ + return (TIFFVTileSize64(tif, tif->tif_dir.td_tilelength)); +} +tmsize_t +TIFFTileSize(TIFF* tif) +{ + static const char module[] = "TIFFTileSize"; + uint64 m; + tmsize_t n; + m=TIFFTileSize64(tif); + n=(tmsize_t)m; + if ((uint64)n!=m) + { + TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); + n=0; + } + return(n); +} + +/* + * Compute a default tile size based on the image + * characteristics and a requested value. If a + * request is <1 then we choose a size according + * to certain heuristics. + */ +void +TIFFDefaultTileSize(TIFF* tif, uint32* tw, uint32* th) +{ + (*tif->tif_deftilesize)(tif, tw, th); +} + +void +_TIFFDefaultTileSize(TIFF* tif, uint32* tw, uint32* th) +{ + (void) tif; + if (*(int32*) tw < 1) + *tw = 256; + if (*(int32*) th < 1) + *th = 256; + /* roundup to a multiple of 16 per the spec */ + if (*tw & 0xf) + *tw = TIFFroundup_32(*tw, 16); + if (*th & 0xf) + *th = TIFFroundup_32(*th, 16); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_unix.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_unix.c new file mode 100644 index 000000000..1387558fb --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_unix.c @@ -0,0 +1,322 @@ +/* $Id: tif_unix.c,v 1.23 2012-06-01 21:40:59 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library UNIX-specific Routines. These are should also work with the + * Windows Common RunTime Library. + */ + +#include "tif_config.h" + +#ifdef HAVE_SYS_TYPES_H +# include +#endif + +#include + +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef HAVE_FCNTL_H +# include +#endif + +#ifdef HAVE_IO_H +# include +#endif + +#include "tiffiop.h" + +static tmsize_t +_tiffReadProc(thandle_t fd, void* buf, tmsize_t size) +{ + size_t size_io = (size_t) size; + if ((tmsize_t) size_io != size) + { + errno=EINVAL; + return (tmsize_t) -1; + } + return ((tmsize_t) read((int) fd, buf, size_io)); +} + +static tmsize_t +_tiffWriteProc(thandle_t fd, void* buf, tmsize_t size) +{ + size_t size_io = (size_t) size; + if ((tmsize_t) size_io != size) + { + errno=EINVAL; + return (tmsize_t) -1; + } + return ((tmsize_t) write((int) fd, buf, size_io)); +} + +static uint64 +_tiffSeekProc(thandle_t fd, uint64 off, int whence) +{ + off_t off_io = (off_t) off; + if ((uint64) off_io != off) + { + errno=EINVAL; + return (uint64) -1; /* this is really gross */ + } + return((uint64)lseek((int)fd,off_io,whence)); +} + +static int +_tiffCloseProc(thandle_t fd) +{ + return(close((int)fd)); +} + +static uint64 +_tiffSizeProc(thandle_t fd) +{ + struct stat sb; + if (fstat((int)fd,&sb)<0) + return(0); + else + return((uint64)sb.st_size); +} + +#ifdef HAVE_MMAP +#include + +static int +_tiffMapProc(thandle_t fd, void** pbase, toff_t* psize) +{ + uint64 size64 = _tiffSizeProc(fd); + tmsize_t sizem = (tmsize_t)size64; + if ((uint64)sizem==size64) { + *pbase = (void*) + mmap(0, (size_t)sizem, PROT_READ, MAP_SHARED, (int) fd, 0); + if (*pbase != (void*) -1) { + *psize = (tmsize_t)sizem; + return (1); + } + } + return (0); +} + +static void +_tiffUnmapProc(thandle_t fd, void* base, toff_t size) +{ + (void) fd; + (void) munmap(base, (off_t) size); +} +#else /* !HAVE_MMAP */ +static int +_tiffMapProc(thandle_t fd, void** pbase, toff_t* psize) +{ + (void) fd; (void) pbase; (void) psize; + return (0); +} + +static void +_tiffUnmapProc(thandle_t fd, void* base, toff_t size) +{ + (void) fd; (void) base; (void) size; +} +#endif /* !HAVE_MMAP */ + +/* + * Open a TIFF file descriptor for read/writing. + */ +TIFF* +TIFFFdOpen(int fd, const char* name, const char* mode) +{ + TIFF* tif; + + tif = TIFFClientOpen(name, mode, + (thandle_t) fd, + _tiffReadProc, _tiffWriteProc, + _tiffSeekProc, _tiffCloseProc, _tiffSizeProc, + _tiffMapProc, _tiffUnmapProc); + if (tif) + tif->tif_fd = fd; + return (tif); +} + +/* + * Open a TIFF file for read/writing. + */ +TIFF* +TIFFOpen(const char* name, const char* mode) +{ + static const char module[] = "TIFFOpen"; + int m, fd; + TIFF* tif; + + m = _TIFFgetMode(mode, module); + if (m == -1) + return ((TIFF*)0); + +/* for cygwin and mingw */ +#ifdef O_BINARY + m |= O_BINARY; +#endif + + fd = open(name, m, 0666); + if (fd < 0) { + if (errno > 0 && strerror(errno) != NULL ) { + TIFFErrorExt(0, module, "%s: %s", name, strerror(errno) ); + } else { + TIFFErrorExt(0, module, "%s: Cannot open", name); + } + return ((TIFF *)0); + } + + tif = TIFFFdOpen((int)fd, name, mode); + if(!tif) + close(fd); + return tif; +} + +#ifdef __WIN32__ +#include +/* + * Open a TIFF file with a Unicode filename, for read/writing. + */ +TIFF* +TIFFOpenW(const wchar_t* name, const char* mode) +{ + static const char module[] = "TIFFOpenW"; + int m, fd; + int mbsize; + char *mbname; + TIFF* tif; + + m = _TIFFgetMode(mode, module); + if (m == -1) + return ((TIFF*)0); + +/* for cygwin and mingw */ +#ifdef O_BINARY + m |= O_BINARY; +#endif + + fd = _wopen(name, m, 0666); + if (fd < 0) { + TIFFErrorExt(0, module, "%s: Cannot open", name); + return ((TIFF *)0); + } + + mbname = NULL; + mbsize = WideCharToMultiByte(CP_ACP, 0, name, -1, NULL, 0, NULL, NULL); + if (mbsize > 0) { + mbname = _TIFFmalloc(mbsize); + if (!mbname) { + TIFFErrorExt(0, module, + "Can't allocate space for filename conversion buffer"); + return ((TIFF*)0); + } + + WideCharToMultiByte(CP_ACP, 0, name, -1, mbname, mbsize, + NULL, NULL); + } + + tif = TIFFFdOpen((int)fd, (mbname != NULL) ? mbname : "", + mode); + + _TIFFfree(mbname); + + if(!tif) + close(fd); + return tif; +} +#endif + +void* +_TIFFmalloc(tmsize_t s) +{ + return (malloc((size_t) s)); +} + +void +_TIFFfree(void* p) +{ + free(p); +} + +void* +_TIFFrealloc(void* p, tmsize_t s) +{ + return (realloc(p, (size_t) s)); +} + +void +_TIFFmemset(void* p, int v, tmsize_t c) +{ + memset(p, v, (size_t) c); +} + +void +_TIFFmemcpy(void* d, const void* s, tmsize_t c) +{ + memcpy(d, s, (size_t) c); +} + +int +_TIFFmemcmp(const void* p1, const void* p2, tmsize_t c) +{ + return (memcmp(p1, p2, (size_t) c)); +} + +static void +unixWarningHandler(const char* module, const char* fmt, va_list ap) +{ + if (module != NULL) + fprintf(stderr, "%s: ", module); + fprintf(stderr, "Warning, "); + vfprintf(stderr, fmt, ap); + fprintf(stderr, ".\n"); +} +TIFFErrorHandler _TIFFwarningHandler = unixWarningHandler; + +static void +unixErrorHandler(const char* module, const char* fmt, va_list ap) +{ + if (module != NULL) + fprintf(stderr, "%s: ", module); + vfprintf(stderr, fmt, ap); + fprintf(stderr, ".\n"); +} +TIFFErrorHandler _TIFFerrorHandler = unixErrorHandler; + +/* vim: set ts=8 sts=8 sw=8 noet: */ + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_version.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_version.c new file mode 100644 index 000000000..f92c843d8 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_version.c @@ -0,0 +1,40 @@ +/* $Header: /cvs/maptools/cvsroot/libtiff/libtiff/tif_version.c,v 1.3 2010-03-10 18:56:49 bfriesen Exp $ */ +/* + * Copyright (c) 1992-1997 Sam Leffler + * Copyright (c) 1992-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ +#include "tiffiop.h" + +static const char TIFFVersion[] = TIFFLIB_VERSION_STR; + +const char* +TIFFGetVersion(void) +{ + return (TIFFVersion); +} +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_warning.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_warning.c new file mode 100644 index 000000000..423b636e6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_warning.c @@ -0,0 +1,81 @@ +/* $Header: /cvs/maptools/cvsroot/libtiff/libtiff/tif_warning.c,v 1.3 2010-03-10 18:56:49 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + */ +#include "tiffiop.h" + +TIFFErrorHandlerExt _TIFFwarningHandlerExt = NULL; + +TIFFErrorHandler +TIFFSetWarningHandler(TIFFErrorHandler handler) +{ + TIFFErrorHandler prev = _TIFFwarningHandler; + _TIFFwarningHandler = handler; + return (prev); +} + +TIFFErrorHandlerExt +TIFFSetWarningHandlerExt(TIFFErrorHandlerExt handler) +{ + TIFFErrorHandlerExt prev = _TIFFwarningHandlerExt; + _TIFFwarningHandlerExt = handler; + return (prev); +} + +void +TIFFWarning(const char* module, const char* fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + if (_TIFFwarningHandler) + (*_TIFFwarningHandler)(module, fmt, ap); + if (_TIFFwarningHandlerExt) + (*_TIFFwarningHandlerExt)(0, module, fmt, ap); + va_end(ap); +} + +void +TIFFWarningExt(thandle_t fd, const char* module, const char* fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + if (_TIFFwarningHandler) + (*_TIFFwarningHandler)(module, fmt, ap); + if (_TIFFwarningHandlerExt) + (*_TIFFwarningHandlerExt)(fd, module, fmt, ap); + va_end(ap); +} + + +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_win32.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_win32.c new file mode 100644 index 000000000..2cf1de93f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_win32.c @@ -0,0 +1,440 @@ +/* $Id: tif_win32.c,v 1.39 2011-12-22 17:07:57 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library Win32-specific Routines. Adapted from tif_unix.c 4/5/95 by + * Scott Wagner (wagner@itek.com), Itek Graphix, Rochester, NY USA + */ +#include "tiffiop.h" + +#include + +static tmsize_t +_tiffReadProc(thandle_t fd, void* buf, tmsize_t size) +{ + /* tmsize_t is 64bit on 64bit systems, but the WinAPI ReadFile takes + * 32bit sizes, so we loop through the data in suitable 32bit sized + * chunks */ + uint8* ma; + uint64 mb; + DWORD n; + DWORD o; + tmsize_t p; + ma=(uint8*)buf; + mb=size; + p=0; + while (mb>0) + { + n=0x80000000UL; + if ((uint64)n>mb) + n=(DWORD)mb; + if (!ReadFile(fd,(LPVOID)ma,n,&o,NULL)) + return(0); + ma+=o; + mb-=o; + p+=o; + if (o!=n) + break; + } + return(p); +} + +static tmsize_t +_tiffWriteProc(thandle_t fd, void* buf, tmsize_t size) +{ + /* tmsize_t is 64bit on 64bit systems, but the WinAPI WriteFile takes + * 32bit sizes, so we loop through the data in suitable 32bit sized + * chunks */ + uint8* ma; + uint64 mb; + DWORD n; + DWORD o; + tmsize_t p; + ma=(uint8*)buf; + mb=size; + p=0; + while (mb>0) + { + n=0x80000000UL; + if ((uint64)n>mb) + n=(DWORD)mb; + if (!WriteFile(fd,(LPVOID)ma,n,&o,NULL)) + return(0); + ma+=o; + mb-=o; + p+=o; + if (o!=n) + break; + } + return(p); +} + +static uint64 +_tiffSeekProc(thandle_t fd, uint64 off, int whence) +{ + LARGE_INTEGER offli; + DWORD dwMoveMethod; + offli.QuadPart = off; + switch(whence) + { + case SEEK_SET: + dwMoveMethod = FILE_BEGIN; + break; + case SEEK_CUR: + dwMoveMethod = FILE_CURRENT; + break; + case SEEK_END: + dwMoveMethod = FILE_END; + break; + default: + dwMoveMethod = FILE_BEGIN; + break; + } + offli.LowPart=SetFilePointer(fd,offli.LowPart,&offli.HighPart,dwMoveMethod); + if ((offli.LowPart==INVALID_SET_FILE_POINTER)&&(GetLastError()!=NO_ERROR)) + offli.QuadPart=0; + return(offli.QuadPart); +} + +static int +_tiffCloseProc(thandle_t fd) +{ + return (CloseHandle(fd) ? 0 : -1); +} + +static uint64 +_tiffSizeProc(thandle_t fd) +{ + ULARGE_INTEGER m; + m.LowPart=GetFileSize(fd,&m.HighPart); + return(m.QuadPart); +} + +static int +_tiffDummyMapProc(thandle_t fd, void** pbase, toff_t* psize) +{ + (void) fd; + (void) pbase; + (void) psize; + return (0); +} + +/* + * From "Hermann Josef Hill" : + * + * Windows uses both a handle and a pointer for file mapping, + * but according to the SDK documentation and Richter's book + * "Advanced Windows Programming" it is safe to free the handle + * after obtaining the file mapping pointer + * + * This removes a nasty OS dependency and cures a problem + * with Visual C++ 5.0 + */ +static int +_tiffMapProc(thandle_t fd, void** pbase, toff_t* psize) +{ + uint64 size; + tmsize_t sizem; + HANDLE hMapFile; + + size = _tiffSizeProc(fd); + sizem = (tmsize_t)size; + if ((uint64)sizem!=size) + return (0); + + /* By passing in 0 for the maximum file size, it specifies that we + create a file mapping object for the full file size. */ + hMapFile = CreateFileMapping(fd, NULL, PAGE_READONLY, 0, 0, NULL); + if (hMapFile == NULL) + return (0); + *pbase = MapViewOfFile(hMapFile, FILE_MAP_READ, 0, 0, 0); + CloseHandle(hMapFile); + if (*pbase == NULL) + return (0); + *psize = size; + return(1); +} + +static void +_tiffDummyUnmapProc(thandle_t fd, void* base, toff_t size) +{ + (void) fd; + (void) base; + (void) size; +} + +static void +_tiffUnmapProc(thandle_t fd, void* base, toff_t size) +{ + (void) fd; + (void) size; + UnmapViewOfFile(base); +} + +/* + * Open a TIFF file descriptor for read/writing. + * Note that TIFFFdOpen and TIFFOpen recognise the character 'u' in the mode + * string, which forces the file to be opened unmapped. + */ +TIFF* +TIFFFdOpen(int ifd, const char* name, const char* mode) +{ + TIFF* tif; + int fSuppressMap; + int m; + fSuppressMap=0; + for (m=0; mode[m]!=0; m++) + { + if (mode[m]=='u') + { + fSuppressMap=1; + break; + } + } + tif = TIFFClientOpen(name, mode, (thandle_t)ifd, + _tiffReadProc, _tiffWriteProc, + _tiffSeekProc, _tiffCloseProc, _tiffSizeProc, + fSuppressMap ? _tiffDummyMapProc : _tiffMapProc, + fSuppressMap ? _tiffDummyUnmapProc : _tiffUnmapProc); + if (tif) + tif->tif_fd = ifd; + return (tif); +} + +#ifndef _WIN32_WCE + +/* + * Open a TIFF file for read/writing. + */ +TIFF* +TIFFOpen(const char* name, const char* mode) +{ + static const char module[] = "TIFFOpen"; + thandle_t fd; + int m; + DWORD dwMode; + TIFF* tif; + + m = _TIFFgetMode(mode, module); + + switch(m) { + case O_RDONLY: dwMode = OPEN_EXISTING; break; + case O_RDWR: dwMode = OPEN_ALWAYS; break; + case O_RDWR|O_CREAT: dwMode = OPEN_ALWAYS; break; + case O_RDWR|O_TRUNC: dwMode = CREATE_ALWAYS; break; + case O_RDWR|O_CREAT|O_TRUNC: dwMode = CREATE_ALWAYS; break; + default: return ((TIFF*)0); + } + + fd = (thandle_t)CreateFileA(name, + (m == O_RDONLY)?GENERIC_READ:(GENERIC_READ | GENERIC_WRITE), + FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, dwMode, + (m == O_RDONLY)?FILE_ATTRIBUTE_READONLY:FILE_ATTRIBUTE_NORMAL, + NULL); + if (fd == INVALID_HANDLE_VALUE) { + TIFFErrorExt(0, module, "%s: Cannot open", name); + return ((TIFF *)0); + } + + tif = TIFFFdOpen((int)fd, name, mode); + if(!tif) + CloseHandle(fd); + return tif; +} + +/* + * Open a TIFF file with a Unicode filename, for read/writing. + */ +TIFF* +TIFFOpenW(const wchar_t* name, const char* mode) +{ + static const char module[] = "TIFFOpenW"; + thandle_t fd; + int m; + DWORD dwMode; + int mbsize; + char *mbname; + TIFF *tif; + + m = _TIFFgetMode(mode, module); + + switch(m) { + case O_RDONLY: dwMode = OPEN_EXISTING; break; + case O_RDWR: dwMode = OPEN_ALWAYS; break; + case O_RDWR|O_CREAT: dwMode = OPEN_ALWAYS; break; + case O_RDWR|O_TRUNC: dwMode = CREATE_ALWAYS; break; + case O_RDWR|O_CREAT|O_TRUNC: dwMode = CREATE_ALWAYS; break; + default: return ((TIFF*)0); + } + + fd = (thandle_t)CreateFileW(name, + (m == O_RDONLY)?GENERIC_READ:(GENERIC_READ|GENERIC_WRITE), + FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, dwMode, + (m == O_RDONLY)?FILE_ATTRIBUTE_READONLY:FILE_ATTRIBUTE_NORMAL, + NULL); + if (fd == INVALID_HANDLE_VALUE) { + TIFFErrorExt(0, module, "%S: Cannot open", name); + return ((TIFF *)0); + } + + mbname = NULL; + mbsize = WideCharToMultiByte(CP_ACP, 0, name, -1, NULL, 0, NULL, NULL); + if (mbsize > 0) { + mbname = (char *)_TIFFmalloc(mbsize); + if (!mbname) { + TIFFErrorExt(0, module, + "Can't allocate space for filename conversion buffer"); + return ((TIFF*)0); + } + + WideCharToMultiByte(CP_ACP, 0, name, -1, mbname, mbsize, + NULL, NULL); + } + + tif = TIFFFdOpen((int)fd, + (mbname != NULL) ? mbname : "", mode); + if(!tif) + CloseHandle(fd); + + _TIFFfree(mbname); + + return tif; +} + +#endif /* ndef _WIN32_WCE */ + +void* +_TIFFmalloc(tmsize_t s) +{ + return (malloc((size_t) s)); +} + +void +_TIFFfree(void* p) +{ + free(p); +} + +void* +_TIFFrealloc(void* p, tmsize_t s) +{ + return (realloc(p, (size_t) s)); +} + +void +_TIFFmemset(void* p, int v, tmsize_t c) +{ + memset(p, v, (size_t) c); +} + +void +_TIFFmemcpy(void* d, const void* s, tmsize_t c) +{ + memcpy(d, s, (size_t) c); +} + +int +_TIFFmemcmp(const void* p1, const void* p2, tmsize_t c) +{ + return (memcmp(p1, p2, (size_t) c)); +} + +#ifndef _WIN32_WCE + +#if (_MSC_VER < 1500) +# define vsnprintf _vsnprintf +#endif + +static void +Win32WarningHandler(const char* module, const char* fmt, va_list ap) +{ +#ifndef TIF_PLATFORM_CONSOLE + LPTSTR szTitle; + LPTSTR szTmp; + LPCTSTR szTitleText = "%s Warning"; + LPCTSTR szDefaultModule = "LIBTIFF"; + LPCTSTR szTmpModule = (module == NULL) ? szDefaultModule : module; + SIZE_T nBufSize = (strlen(szTmpModule) + + strlen(szTitleText) + strlen(fmt) + 256)*sizeof(char); + + if ((szTitle = (LPTSTR)LocalAlloc(LMEM_FIXED, nBufSize)) == NULL) + return; + sprintf(szTitle, szTitleText, szTmpModule); + szTmp = szTitle + (strlen(szTitle)+2)*sizeof(char); + vsnprintf(szTmp, nBufSize-(strlen(szTitle)+2)*sizeof(char), fmt, ap); + MessageBoxA(GetFocus(), szTmp, szTitle, MB_OK | MB_ICONINFORMATION); + LocalFree(szTitle); + + return; +#else + if (module != NULL) + fprintf(stderr, "%s: ", module); + fprintf(stderr, "Warning, "); + vfprintf(stderr, fmt, ap); + fprintf(stderr, ".\n"); +#endif +} +TIFFErrorHandler _TIFFwarningHandler = Win32WarningHandler; + +static void +Win32ErrorHandler(const char* module, const char* fmt, va_list ap) +{ +#ifndef TIF_PLATFORM_CONSOLE + LPTSTR szTitle; + LPTSTR szTmp; + LPCTSTR szTitleText = "%s Error"; + LPCTSTR szDefaultModule = "LIBTIFF"; + LPCTSTR szTmpModule = (module == NULL) ? szDefaultModule : module; + SIZE_T nBufSize = (strlen(szTmpModule) + + strlen(szTitleText) + strlen(fmt) + 256)*sizeof(char); + + if ((szTitle = (LPTSTR)LocalAlloc(LMEM_FIXED, nBufSize)) == NULL) + return; + sprintf(szTitle, szTitleText, szTmpModule); + szTmp = szTitle + (strlen(szTitle)+2)*sizeof(char); + vsnprintf(szTmp, nBufSize-(strlen(szTitle)+2)*sizeof(char), fmt, ap); + MessageBoxA(GetFocus(), szTmp, szTitle, MB_OK | MB_ICONEXCLAMATION); + LocalFree(szTitle); + return; +#else + if (module != NULL) + fprintf(stderr, "%s: ", module); + vfprintf(stderr, fmt, ap); + fprintf(stderr, ".\n"); +#endif +} +TIFFErrorHandler _TIFFerrorHandler = Win32ErrorHandler; + +#endif /* ndef _WIN32_WCE */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_write.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_write.c new file mode 100644 index 000000000..8792123ca --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_write.c @@ -0,0 +1,771 @@ +/* $Id: tif_write.c,v 1.37 2012-08-13 22:10:17 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library. + * + * Scanline-oriented Write Support + */ +#include "tiffiop.h" +#include + +#define STRIPINCR 20 /* expansion factor on strip array */ + +#define WRITECHECKSTRIPS(tif, module) \ + (((tif)->tif_flags&TIFF_BEENWRITING) || TIFFWriteCheck((tif),0,module)) +#define WRITECHECKTILES(tif, module) \ + (((tif)->tif_flags&TIFF_BEENWRITING) || TIFFWriteCheck((tif),1,module)) +#define BUFFERCHECK(tif) \ + ((((tif)->tif_flags & TIFF_BUFFERSETUP) && tif->tif_rawdata) || \ + TIFFWriteBufferSetup((tif), NULL, (tmsize_t) -1)) + +static int TIFFGrowStrips(TIFF* tif, uint32 delta, const char* module); +static int TIFFAppendToStrip(TIFF* tif, uint32 strip, uint8* data, tmsize_t cc); + +int +TIFFWriteScanline(TIFF* tif, void* buf, uint32 row, uint16 sample) +{ + static const char module[] = "TIFFWriteScanline"; + register TIFFDirectory *td; + int status, imagegrew = 0; + uint32 strip; + + if (!WRITECHECKSTRIPS(tif, module)) + return (-1); + /* + * Handle delayed allocation of data buffer. This + * permits it to be sized more intelligently (using + * directory information). + */ + if (!BUFFERCHECK(tif)) + return (-1); + tif->tif_flags |= TIFF_BUF4WRITE; /* not strictly sure this is right*/ + + td = &tif->tif_dir; + /* + * Extend image length if needed + * (but only for PlanarConfig=1). + */ + if (row >= td->td_imagelength) { /* extend image */ + if (td->td_planarconfig == PLANARCONFIG_SEPARATE) { + TIFFErrorExt(tif->tif_clientdata, module, + "Can not change \"ImageLength\" when using separate planes"); + return (-1); + } + td->td_imagelength = row+1; + imagegrew = 1; + } + /* + * Calculate strip and check for crossings. + */ + if (td->td_planarconfig == PLANARCONFIG_SEPARATE) { + if (sample >= td->td_samplesperpixel) { + TIFFErrorExt(tif->tif_clientdata, module, + "%lu: Sample out of range, max %lu", + (unsigned long) sample, (unsigned long) td->td_samplesperpixel); + return (-1); + } + strip = sample*td->td_stripsperimage + row/td->td_rowsperstrip; + } else + strip = row / td->td_rowsperstrip; + /* + * Check strip array to make sure there's space. We don't support + * dynamically growing files that have data organized in separate + * bitplanes because it's too painful. In that case we require that + * the imagelength be set properly before the first write (so that the + * strips array will be fully allocated above). + */ + if (strip >= td->td_nstrips && !TIFFGrowStrips(tif, 1, module)) + return (-1); + if (strip != tif->tif_curstrip) { + /* + * Changing strips -- flush any data present. + */ + if (!TIFFFlushData(tif)) + return (-1); + tif->tif_curstrip = strip; + /* + * Watch out for a growing image. The value of strips/image + * will initially be 1 (since it can't be deduced until the + * imagelength is known). + */ + if (strip >= td->td_stripsperimage && imagegrew) + td->td_stripsperimage = + TIFFhowmany_32(td->td_imagelength,td->td_rowsperstrip); + tif->tif_row = + (strip % td->td_stripsperimage) * td->td_rowsperstrip; + if ((tif->tif_flags & TIFF_CODERSETUP) == 0) { + if (!(*tif->tif_setupencode)(tif)) + return (-1); + tif->tif_flags |= TIFF_CODERSETUP; + } + + tif->tif_rawcc = 0; + tif->tif_rawcp = tif->tif_rawdata; + + if( td->td_stripbytecount[strip] > 0 ) + { + /* if we are writing over existing tiles, zero length */ + td->td_stripbytecount[strip] = 0; + + /* this forces TIFFAppendToStrip() to do a seek */ + tif->tif_curoff = 0; + } + + if (!(*tif->tif_preencode)(tif, sample)) + return (-1); + tif->tif_flags |= TIFF_POSTENCODE; + } + /* + * Ensure the write is either sequential or at the + * beginning of a strip (or that we can randomly + * access the data -- i.e. no encoding). + */ + if (row != tif->tif_row) { + if (row < tif->tif_row) { + /* + * Moving backwards within the same strip: + * backup to the start and then decode + * forward (below). + */ + tif->tif_row = (strip % td->td_stripsperimage) * + td->td_rowsperstrip; + tif->tif_rawcp = tif->tif_rawdata; + } + /* + * Seek forward to the desired row. + */ + if (!(*tif->tif_seek)(tif, row - tif->tif_row)) + return (-1); + tif->tif_row = row; + } + + /* swab if needed - note that source buffer will be altered */ + tif->tif_postdecode( tif, (uint8*) buf, tif->tif_scanlinesize ); + + status = (*tif->tif_encoderow)(tif, (uint8*) buf, + tif->tif_scanlinesize, sample); + + /* we are now poised at the beginning of the next row */ + tif->tif_row = row + 1; + return (status); +} + +/* + * Encode the supplied data and write it to the + * specified strip. + * + * NB: Image length must be setup before writing. + */ +tmsize_t +TIFFWriteEncodedStrip(TIFF* tif, uint32 strip, void* data, tmsize_t cc) +{ + static const char module[] = "TIFFWriteEncodedStrip"; + TIFFDirectory *td = &tif->tif_dir; + uint16 sample; + + if (!WRITECHECKSTRIPS(tif, module)) + return ((tmsize_t) -1); + /* + * Check strip array to make sure there's space. + * We don't support dynamically growing files that + * have data organized in separate bitplanes because + * it's too painful. In that case we require that + * the imagelength be set properly before the first + * write (so that the strips array will be fully + * allocated above). + */ + if (strip >= td->td_nstrips) { + if (td->td_planarconfig == PLANARCONFIG_SEPARATE) { + TIFFErrorExt(tif->tif_clientdata, module, + "Can not grow image by strips when using separate planes"); + return ((tmsize_t) -1); + } + if (!TIFFGrowStrips(tif, 1, module)) + return ((tmsize_t) -1); + td->td_stripsperimage = + TIFFhowmany_32(td->td_imagelength, td->td_rowsperstrip); + } + /* + * Handle delayed allocation of data buffer. This + * permits it to be sized according to the directory + * info. + */ + if (!BUFFERCHECK(tif)) + return ((tmsize_t) -1); + + tif->tif_flags |= TIFF_BUF4WRITE; + tif->tif_curstrip = strip; + + tif->tif_row = (strip % td->td_stripsperimage) * td->td_rowsperstrip; + if ((tif->tif_flags & TIFF_CODERSETUP) == 0) { + if (!(*tif->tif_setupencode)(tif)) + return ((tmsize_t) -1); + tif->tif_flags |= TIFF_CODERSETUP; + } + + if( td->td_stripbytecount[strip] > 0 ) + { + /* Make sure that at the first attempt of rewriting the tile, we will have */ + /* more bytes available in the output buffer than the previous byte count, */ + /* so that TIFFAppendToStrip() will detect the overflow when it is called the first */ + /* time if the new compressed tile is bigger than the older one. (GDAL #4771) */ + if( tif->tif_rawdatasize <= td->td_stripbytecount[strip] ) + { + if( !(TIFFWriteBufferSetup(tif, NULL, + (tmsize_t)TIFFroundup_64((uint64)(td->td_stripbytecount[strip] + 1), 1024))) ) + return ((tmsize_t)(-1)); + } + + /* Force TIFFAppendToStrip() to consider placing data at end + of file. */ + tif->tif_curoff = 0; + } + + tif->tif_rawcc = 0; + tif->tif_rawcp = tif->tif_rawdata; + + tif->tif_flags &= ~TIFF_POSTENCODE; + sample = (uint16)(strip / td->td_stripsperimage); + if (!(*tif->tif_preencode)(tif, sample)) + return ((tmsize_t) -1); + + /* swab if needed - note that source buffer will be altered */ + tif->tif_postdecode( tif, (uint8*) data, cc ); + + if (!(*tif->tif_encodestrip)(tif, (uint8*) data, cc, sample)) + return (0); + if (!(*tif->tif_postencode)(tif)) + return ((tmsize_t) -1); + if (!isFillOrder(tif, td->td_fillorder) && + (tif->tif_flags & TIFF_NOBITREV) == 0) + TIFFReverseBits(tif->tif_rawdata, tif->tif_rawcc); + if (tif->tif_rawcc > 0 && + !TIFFAppendToStrip(tif, strip, tif->tif_rawdata, tif->tif_rawcc)) + return ((tmsize_t) -1); + tif->tif_rawcc = 0; + tif->tif_rawcp = tif->tif_rawdata; + return (cc); +} + +/* + * Write the supplied data to the specified strip. + * + * NB: Image length must be setup before writing. + */ +tmsize_t +TIFFWriteRawStrip(TIFF* tif, uint32 strip, void* data, tmsize_t cc) +{ + static const char module[] = "TIFFWriteRawStrip"; + TIFFDirectory *td = &tif->tif_dir; + + if (!WRITECHECKSTRIPS(tif, module)) + return ((tmsize_t) -1); + /* + * Check strip array to make sure there's space. + * We don't support dynamically growing files that + * have data organized in separate bitplanes because + * it's too painful. In that case we require that + * the imagelength be set properly before the first + * write (so that the strips array will be fully + * allocated above). + */ + if (strip >= td->td_nstrips) { + if (td->td_planarconfig == PLANARCONFIG_SEPARATE) { + TIFFErrorExt(tif->tif_clientdata, module, + "Can not grow image by strips when using separate planes"); + return ((tmsize_t) -1); + } + /* + * Watch out for a growing image. The value of + * strips/image will initially be 1 (since it + * can't be deduced until the imagelength is known). + */ + if (strip >= td->td_stripsperimage) + td->td_stripsperimage = + TIFFhowmany_32(td->td_imagelength,td->td_rowsperstrip); + if (!TIFFGrowStrips(tif, 1, module)) + return ((tmsize_t) -1); + } + tif->tif_curstrip = strip; + tif->tif_row = (strip % td->td_stripsperimage) * td->td_rowsperstrip; + return (TIFFAppendToStrip(tif, strip, (uint8*) data, cc) ? + cc : (tmsize_t) -1); +} + +/* + * Write and compress a tile of data. The + * tile is selected by the (x,y,z,s) coordinates. + */ +tmsize_t +TIFFWriteTile(TIFF* tif, void* buf, uint32 x, uint32 y, uint32 z, uint16 s) +{ + if (!TIFFCheckTile(tif, x, y, z, s)) + return ((tmsize_t)(-1)); + /* + * NB: A tile size of -1 is used instead of tif_tilesize knowing + * that TIFFWriteEncodedTile will clamp this to the tile size. + * This is done because the tile size may not be defined until + * after the output buffer is setup in TIFFWriteBufferSetup. + */ + return (TIFFWriteEncodedTile(tif, + TIFFComputeTile(tif, x, y, z, s), buf, (tmsize_t)(-1))); +} + +/* + * Encode the supplied data and write it to the + * specified tile. There must be space for the + * data. The function clamps individual writes + * to a tile to the tile size, but does not (and + * can not) check that multiple writes to the same + * tile do not write more than tile size data. + * + * NB: Image length must be setup before writing; this + * interface does not support automatically growing + * the image on each write (as TIFFWriteScanline does). + */ +tmsize_t +TIFFWriteEncodedTile(TIFF* tif, uint32 tile, void* data, tmsize_t cc) +{ + static const char module[] = "TIFFWriteEncodedTile"; + TIFFDirectory *td; + uint16 sample; + + if (!WRITECHECKTILES(tif, module)) + return ((tmsize_t)(-1)); + td = &tif->tif_dir; + if (tile >= td->td_nstrips) { + TIFFErrorExt(tif->tif_clientdata, module, "Tile %lu out of range, max %lu", + (unsigned long) tile, (unsigned long) td->td_nstrips); + return ((tmsize_t)(-1)); + } + /* + * Handle delayed allocation of data buffer. This + * permits it to be sized more intelligently (using + * directory information). + */ + if (!BUFFERCHECK(tif)) + return ((tmsize_t)(-1)); + + tif->tif_flags |= TIFF_BUF4WRITE; + tif->tif_curtile = tile; + + if( td->td_stripbytecount[tile] > 0 ) + { + /* Make sure that at the first attempt of rewriting the tile, we will have */ + /* more bytes available in the output buffer than the previous byte count, */ + /* so that TIFFAppendToStrip() will detect the overflow when it is called the first */ + /* time if the new compressed tile is bigger than the older one. (GDAL #4771) */ + if( tif->tif_rawdatasize <= td->td_stripbytecount[tile] ) + { + if( !(TIFFWriteBufferSetup(tif, NULL, + (tmsize_t)TIFFroundup_64((uint64)(td->td_stripbytecount[tile] + 1), 1024))) ) + return ((tmsize_t)(-1)); + } + + /* Force TIFFAppendToStrip() to consider placing data at end + of file. */ + tif->tif_curoff = 0; + } + + tif->tif_rawcc = 0; + tif->tif_rawcp = tif->tif_rawdata; + + /* + * Compute tiles per row & per column to compute + * current row and column + */ + tif->tif_row = (tile % TIFFhowmany_32(td->td_imagelength, td->td_tilelength)) + * td->td_tilelength; + tif->tif_col = (tile % TIFFhowmany_32(td->td_imagewidth, td->td_tilewidth)) + * td->td_tilewidth; + + if ((tif->tif_flags & TIFF_CODERSETUP) == 0) { + if (!(*tif->tif_setupencode)(tif)) + return ((tmsize_t)(-1)); + tif->tif_flags |= TIFF_CODERSETUP; + } + tif->tif_flags &= ~TIFF_POSTENCODE; + sample = (uint16)(tile/td->td_stripsperimage); + if (!(*tif->tif_preencode)(tif, sample)) + return ((tmsize_t)(-1)); + /* + * Clamp write amount to the tile size. This is mostly + * done so that callers can pass in some large number + * (e.g. -1) and have the tile size used instead. + */ + if ( cc < 1 || cc > tif->tif_tilesize) + cc = tif->tif_tilesize; + + /* swab if needed - note that source buffer will be altered */ + tif->tif_postdecode( tif, (uint8*) data, cc ); + + if (!(*tif->tif_encodetile)(tif, (uint8*) data, cc, sample)) + return (0); + if (!(*tif->tif_postencode)(tif)) + return ((tmsize_t)(-1)); + if (!isFillOrder(tif, td->td_fillorder) && + (tif->tif_flags & TIFF_NOBITREV) == 0) + TIFFReverseBits((uint8*)tif->tif_rawdata, tif->tif_rawcc); + if (tif->tif_rawcc > 0 && !TIFFAppendToStrip(tif, tile, + tif->tif_rawdata, tif->tif_rawcc)) + return ((tmsize_t)(-1)); + tif->tif_rawcc = 0; + tif->tif_rawcp = tif->tif_rawdata; + return (cc); +} + +/* + * Write the supplied data to the specified strip. + * There must be space for the data; we don't check + * if strips overlap! + * + * NB: Image length must be setup before writing; this + * interface does not support automatically growing + * the image on each write (as TIFFWriteScanline does). + */ +tmsize_t +TIFFWriteRawTile(TIFF* tif, uint32 tile, void* data, tmsize_t cc) +{ + static const char module[] = "TIFFWriteRawTile"; + + if (!WRITECHECKTILES(tif, module)) + return ((tmsize_t)(-1)); + if (tile >= tif->tif_dir.td_nstrips) { + TIFFErrorExt(tif->tif_clientdata, module, "Tile %lu out of range, max %lu", + (unsigned long) tile, + (unsigned long) tif->tif_dir.td_nstrips); + return ((tmsize_t)(-1)); + } + return (TIFFAppendToStrip(tif, tile, (uint8*) data, cc) ? + cc : (tmsize_t)(-1)); +} + +#define isUnspecified(tif, f) \ + (TIFFFieldSet(tif,f) && (tif)->tif_dir.td_imagelength == 0) + +int +TIFFSetupStrips(TIFF* tif) +{ + TIFFDirectory* td = &tif->tif_dir; + + if (isTiled(tif)) + td->td_stripsperimage = + isUnspecified(tif, FIELD_TILEDIMENSIONS) ? + td->td_samplesperpixel : TIFFNumberOfTiles(tif); + else + td->td_stripsperimage = + isUnspecified(tif, FIELD_ROWSPERSTRIP) ? + td->td_samplesperpixel : TIFFNumberOfStrips(tif); + td->td_nstrips = td->td_stripsperimage; + if (td->td_planarconfig == PLANARCONFIG_SEPARATE) + td->td_stripsperimage /= td->td_samplesperpixel; + td->td_stripoffset = (uint64 *) + _TIFFmalloc(td->td_nstrips * sizeof (uint64)); + td->td_stripbytecount = (uint64 *) + _TIFFmalloc(td->td_nstrips * sizeof (uint64)); + if (td->td_stripoffset == NULL || td->td_stripbytecount == NULL) + return (0); + /* + * Place data at the end-of-file + * (by setting offsets to zero). + */ + _TIFFmemset(td->td_stripoffset, 0, td->td_nstrips*sizeof (uint64)); + _TIFFmemset(td->td_stripbytecount, 0, td->td_nstrips*sizeof (uint64)); + TIFFSetFieldBit(tif, FIELD_STRIPOFFSETS); + TIFFSetFieldBit(tif, FIELD_STRIPBYTECOUNTS); + return (1); +} +#undef isUnspecified + +/* + * Verify file is writable and that the directory + * information is setup properly. In doing the latter + * we also "freeze" the state of the directory so + * that important information is not changed. + */ +int +TIFFWriteCheck(TIFF* tif, int tiles, const char* module) +{ + if (tif->tif_mode == O_RDONLY) { + TIFFErrorExt(tif->tif_clientdata, module, "File not open for writing"); + return (0); + } + if (tiles ^ isTiled(tif)) { + TIFFErrorExt(tif->tif_clientdata, module, tiles ? + "Can not write tiles to a stripped image" : + "Can not write scanlines to a tiled image"); + return (0); + } + + _TIFFFillStriles( tif ); + + /* + * On the first write verify all the required information + * has been setup and initialize any data structures that + * had to wait until directory information was set. + * Note that a lot of our work is assumed to remain valid + * because we disallow any of the important parameters + * from changing after we start writing (i.e. once + * TIFF_BEENWRITING is set, TIFFSetField will only allow + * the image's length to be changed). + */ + if (!TIFFFieldSet(tif, FIELD_IMAGEDIMENSIONS)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Must set \"ImageWidth\" before writing data"); + return (0); + } + if (tif->tif_dir.td_samplesperpixel == 1) { + /* + * Planarconfiguration is irrelevant in case of single band + * images and need not be included. We will set it anyway, + * because this field is used in other parts of library even + * in the single band case. + */ + if (!TIFFFieldSet(tif, FIELD_PLANARCONFIG)) + tif->tif_dir.td_planarconfig = PLANARCONFIG_CONTIG; + } else { + if (!TIFFFieldSet(tif, FIELD_PLANARCONFIG)) { + TIFFErrorExt(tif->tif_clientdata, module, + "Must set \"PlanarConfiguration\" before writing data"); + return (0); + } + } + if (tif->tif_dir.td_stripoffset == NULL && !TIFFSetupStrips(tif)) { + tif->tif_dir.td_nstrips = 0; + TIFFErrorExt(tif->tif_clientdata, module, "No space for %s arrays", + isTiled(tif) ? "tile" : "strip"); + return (0); + } + if (isTiled(tif)) + { + tif->tif_tilesize = TIFFTileSize(tif); + if (tif->tif_tilesize == 0) + return (0); + } + else + tif->tif_tilesize = (tmsize_t)(-1); + tif->tif_scanlinesize = TIFFScanlineSize(tif); + if (tif->tif_scanlinesize == 0) + return (0); + tif->tif_flags |= TIFF_BEENWRITING; + return (1); +} + +/* + * Setup the raw data buffer used for encoding. + */ +int +TIFFWriteBufferSetup(TIFF* tif, void* bp, tmsize_t size) +{ + static const char module[] = "TIFFWriteBufferSetup"; + + if (tif->tif_rawdata) { + if (tif->tif_flags & TIFF_MYBUFFER) { + _TIFFfree(tif->tif_rawdata); + tif->tif_flags &= ~TIFF_MYBUFFER; + } + tif->tif_rawdata = NULL; + } + if (size == (tmsize_t)(-1)) { + size = (isTiled(tif) ? + tif->tif_tilesize : TIFFStripSize(tif)); + /* + * Make raw data buffer at least 8K + */ + if (size < 8*1024) + size = 8*1024; + bp = NULL; /* NB: force malloc */ + } + if (bp == NULL) { + bp = _TIFFmalloc(size); + if (bp == NULL) { + TIFFErrorExt(tif->tif_clientdata, module, "No space for output buffer"); + return (0); + } + tif->tif_flags |= TIFF_MYBUFFER; + } else + tif->tif_flags &= ~TIFF_MYBUFFER; + tif->tif_rawdata = (uint8*) bp; + tif->tif_rawdatasize = size; + tif->tif_rawcc = 0; + tif->tif_rawcp = tif->tif_rawdata; + tif->tif_flags |= TIFF_BUFFERSETUP; + return (1); +} + +/* + * Grow the strip data structures by delta strips. + */ +static int +TIFFGrowStrips(TIFF* tif, uint32 delta, const char* module) +{ + TIFFDirectory *td = &tif->tif_dir; + uint64* new_stripoffset; + uint64* new_stripbytecount; + + assert(td->td_planarconfig == PLANARCONFIG_CONTIG); + new_stripoffset = (uint64*)_TIFFrealloc(td->td_stripoffset, + (td->td_nstrips + delta) * sizeof (uint64)); + new_stripbytecount = (uint64*)_TIFFrealloc(td->td_stripbytecount, + (td->td_nstrips + delta) * sizeof (uint64)); + if (new_stripoffset == NULL || new_stripbytecount == NULL) { + if (new_stripoffset) + _TIFFfree(new_stripoffset); + if (new_stripbytecount) + _TIFFfree(new_stripbytecount); + td->td_nstrips = 0; + TIFFErrorExt(tif->tif_clientdata, module, "No space to expand strip arrays"); + return (0); + } + td->td_stripoffset = new_stripoffset; + td->td_stripbytecount = new_stripbytecount; + _TIFFmemset(td->td_stripoffset + td->td_nstrips, + 0, delta*sizeof (uint64)); + _TIFFmemset(td->td_stripbytecount + td->td_nstrips, + 0, delta*sizeof (uint64)); + td->td_nstrips += delta; + tif->tif_flags |= TIFF_DIRTYDIRECT; + + return (1); +} + +/* + * Append the data to the specified strip. + */ +static int +TIFFAppendToStrip(TIFF* tif, uint32 strip, uint8* data, tmsize_t cc) +{ + static const char module[] = "TIFFAppendToStrip"; + TIFFDirectory *td = &tif->tif_dir; + uint64 m; + int64 old_byte_count = -1; + + if (td->td_stripoffset[strip] == 0 || tif->tif_curoff == 0) { + assert(td->td_nstrips > 0); + + if( td->td_stripbytecount[strip] != 0 + && td->td_stripoffset[strip] != 0 + && td->td_stripbytecount[strip] >= (uint64) cc ) + { + /* + * There is already tile data on disk, and the new tile + * data we have will fit in the same space. The only + * aspect of this that is risky is that there could be + * more data to append to this strip before we are done + * depending on how we are getting called. + */ + if (!SeekOK(tif, td->td_stripoffset[strip])) { + TIFFErrorExt(tif->tif_clientdata, module, + "Seek error at scanline %lu", + (unsigned long)tif->tif_row); + return (0); + } + } + else + { + /* + * Seek to end of file, and set that as our location to + * write this strip. + */ + td->td_stripoffset[strip] = TIFFSeekFile(tif, 0, SEEK_END); + tif->tif_flags |= TIFF_DIRTYSTRIP; + } + + tif->tif_curoff = td->td_stripoffset[strip]; + + /* + * We are starting a fresh strip/tile, so set the size to zero. + */ + old_byte_count = td->td_stripbytecount[strip]; + td->td_stripbytecount[strip] = 0; + } + + m = tif->tif_curoff+cc; + if (!(tif->tif_flags&TIFF_BIGTIFF)) + m = (uint32)m; + if ((mtif_curoff)||(m<(uint64)cc)) + { + TIFFErrorExt(tif->tif_clientdata, module, "Maximum TIFF file size exceeded"); + return (0); + } + if (!WriteOK(tif, data, cc)) { + TIFFErrorExt(tif->tif_clientdata, module, "Write error at scanline %lu", + (unsigned long) tif->tif_row); + return (0); + } + tif->tif_curoff = m; + td->td_stripbytecount[strip] += cc; + + if( (int64) td->td_stripbytecount[strip] != old_byte_count ) + tif->tif_flags |= TIFF_DIRTYSTRIP; + + return (1); +} + +/* + * Internal version of TIFFFlushData that can be + * called by ``encodestrip routines'' w/o concern + * for infinite recursion. + */ +int +TIFFFlushData1(TIFF* tif) +{ + if (tif->tif_rawcc > 0 && tif->tif_flags & TIFF_BUF4WRITE ) { + if (!isFillOrder(tif, tif->tif_dir.td_fillorder) && + (tif->tif_flags & TIFF_NOBITREV) == 0) + TIFFReverseBits((uint8*)tif->tif_rawdata, + tif->tif_rawcc); + if (!TIFFAppendToStrip(tif, + isTiled(tif) ? tif->tif_curtile : tif->tif_curstrip, + tif->tif_rawdata, tif->tif_rawcc)) + return (0); + tif->tif_rawcc = 0; + tif->tif_rawcp = tif->tif_rawdata; + } + return (1); +} + +/* + * Set the current write offset. This should only be + * used to set the offset to a known previous location + * (very carefully), or to 0 so that the next write gets + * appended to the end of the file. + */ +void +TIFFSetWriteOffset(TIFF* tif, toff_t off) +{ + tif->tif_curoff = off; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tif_zip.c b/src/SDL2/external/tiff-4.0.3/libtiff/tif_zip.c new file mode 100644 index 000000000..f5aa2a964 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tif_zip.c @@ -0,0 +1,469 @@ +/* $Id: tif_zip.c,v 1.31 2011-01-06 16:00:23 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1995-1997 Sam Leffler + * Copyright (c) 1995-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tiffiop.h" +#ifdef ZIP_SUPPORT +/* + * TIFF Library. + * + * ZIP (aka Deflate) Compression Support + * + * This file is simply an interface to the zlib library written by + * Jean-loup Gailly and Mark Adler. You must use version 1.0 or later + * of the library: this code assumes the 1.0 API and also depends on + * the ability to write the zlib header multiple times (one per strip) + * which was not possible with versions prior to 0.95. Note also that + * older versions of this codec avoided this bug by supressing the header + * entirely. This means that files written with the old library cannot + * be read; they should be converted to a different compression scheme + * and then reconverted. + * + * The data format used by the zlib library is described in the files + * zlib-3.1.doc, deflate-1.1.doc and gzip-4.1.doc, available in the + * directory ftp://ftp.uu.net/pub/archiving/zip/doc. The library was + * last found at ftp://ftp.uu.net/pub/archiving/zip/zlib/zlib-0.99.tar.gz. + */ +#include "tif_predict.h" +#include "zlib.h" + +#include + +/* + * Sigh, ZLIB_VERSION is defined as a string so there's no + * way to do a proper check here. Instead we guess based + * on the presence of #defines that were added between the + * 0.95 and 1.0 distributions. + */ +#if !defined(Z_NO_COMPRESSION) || !defined(Z_DEFLATED) +#error "Antiquated ZLIB software; you must use version 1.0 or later" +#endif + +/* + * State block for each open TIFF + * file using ZIP compression/decompression. + */ +typedef struct { + TIFFPredictorState predict; + z_stream stream; + int zipquality; /* compression level */ + int state; /* state flags */ +#define ZSTATE_INIT_DECODE 0x01 +#define ZSTATE_INIT_ENCODE 0x02 + + TIFFVGetMethod vgetparent; /* super-class method */ + TIFFVSetMethod vsetparent; /* super-class method */ +} ZIPState; + +#define ZState(tif) ((ZIPState*) (tif)->tif_data) +#define DecoderState(tif) ZState(tif) +#define EncoderState(tif) ZState(tif) + +static int ZIPEncode(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s); +static int ZIPDecode(TIFF* tif, uint8* op, tmsize_t occ, uint16 s); + +static int +ZIPFixupTags(TIFF* tif) +{ + (void) tif; + return (1); +} + +static int +ZIPSetupDecode(TIFF* tif) +{ + static const char module[] = "ZIPSetupDecode"; + ZIPState* sp = DecoderState(tif); + + assert(sp != NULL); + + /* if we were last encoding, terminate this mode */ + if (sp->state & ZSTATE_INIT_ENCODE) { + deflateEnd(&sp->stream); + sp->state = 0; + } + + if (inflateInit(&sp->stream) != Z_OK) { + TIFFErrorExt(tif->tif_clientdata, module, "%s", sp->stream.msg); + return (0); + } else { + sp->state |= ZSTATE_INIT_DECODE; + return (1); + } +} + +/* + * Setup state for decoding a strip. + */ +static int +ZIPPreDecode(TIFF* tif, uint16 s) +{ + static const char module[] = "ZIPPreDecode"; + ZIPState* sp = DecoderState(tif); + + (void) s; + assert(sp != NULL); + + if( (sp->state & ZSTATE_INIT_DECODE) == 0 ) + tif->tif_setupdecode( tif ); + + sp->stream.next_in = tif->tif_rawdata; + assert(sizeof(sp->stream.avail_in)==4); /* if this assert gets raised, + we need to simplify this code to reflect a ZLib that is likely updated + to deal with 8byte memory sizes, though this code will respond + apropriately even before we simplify it */ + sp->stream.avail_in = (uInt) tif->tif_rawcc; + if ((tmsize_t)sp->stream.avail_in != tif->tif_rawcc) + { + TIFFErrorExt(tif->tif_clientdata, module, "ZLib cannot deal with buffers this size"); + return (0); + } + return (inflateReset(&sp->stream) == Z_OK); +} + +static int +ZIPDecode(TIFF* tif, uint8* op, tmsize_t occ, uint16 s) +{ + static const char module[] = "ZIPDecode"; + ZIPState* sp = DecoderState(tif); + + (void) s; + assert(sp != NULL); + assert(sp->state == ZSTATE_INIT_DECODE); + + sp->stream.next_in = tif->tif_rawcp; + sp->stream.avail_in = (uInt) tif->tif_rawcc; + + sp->stream.next_out = op; + assert(sizeof(sp->stream.avail_out)==4); /* if this assert gets raised, + we need to simplify this code to reflect a ZLib that is likely updated + to deal with 8byte memory sizes, though this code will respond + apropriately even before we simplify it */ + sp->stream.avail_out = (uInt) occ; + if ((tmsize_t)sp->stream.avail_out != occ) + { + TIFFErrorExt(tif->tif_clientdata, module, "ZLib cannot deal with buffers this size"); + return (0); + } + do { + int state = inflate(&sp->stream, Z_PARTIAL_FLUSH); + if (state == Z_STREAM_END) + break; + if (state == Z_DATA_ERROR) { + TIFFErrorExt(tif->tif_clientdata, module, + "Decoding error at scanline %lu, %s", + (unsigned long) tif->tif_row, sp->stream.msg); + if (inflateSync(&sp->stream) != Z_OK) + return (0); + continue; + } + if (state != Z_OK) { + TIFFErrorExt(tif->tif_clientdata, module, "ZLib error: %s", + sp->stream.msg); + return (0); + } + } while (sp->stream.avail_out > 0); + if (sp->stream.avail_out != 0) { + TIFFErrorExt(tif->tif_clientdata, module, + "Not enough data at scanline %lu (short " TIFF_UINT64_FORMAT " bytes)", + (unsigned long) tif->tif_row, (TIFF_UINT64_T) sp->stream.avail_out); + return (0); + } + + tif->tif_rawcp = sp->stream.next_in; + tif->tif_rawcc = sp->stream.avail_in; + + return (1); +} + +static int +ZIPSetupEncode(TIFF* tif) +{ + static const char module[] = "ZIPSetupEncode"; + ZIPState* sp = EncoderState(tif); + + assert(sp != NULL); + if (sp->state & ZSTATE_INIT_DECODE) { + inflateEnd(&sp->stream); + sp->state = 0; + } + + if (deflateInit(&sp->stream, sp->zipquality) != Z_OK) { + TIFFErrorExt(tif->tif_clientdata, module, "%s", sp->stream.msg); + return (0); + } else { + sp->state |= ZSTATE_INIT_ENCODE; + return (1); + } +} + +/* + * Reset encoding state at the start of a strip. + */ +static int +ZIPPreEncode(TIFF* tif, uint16 s) +{ + static const char module[] = "ZIPPreEncode"; + ZIPState *sp = EncoderState(tif); + + (void) s; + assert(sp != NULL); + if( sp->state != ZSTATE_INIT_ENCODE ) + tif->tif_setupencode( tif ); + + sp->stream.next_out = tif->tif_rawdata; + assert(sizeof(sp->stream.avail_out)==4); /* if this assert gets raised, + we need to simplify this code to reflect a ZLib that is likely updated + to deal with 8byte memory sizes, though this code will respond + apropriately even before we simplify it */ + sp->stream.avail_out = tif->tif_rawdatasize; + if ((tmsize_t)sp->stream.avail_out != tif->tif_rawdatasize) + { + TIFFErrorExt(tif->tif_clientdata, module, "ZLib cannot deal with buffers this size"); + return (0); + } + return (deflateReset(&sp->stream) == Z_OK); +} + +/* + * Encode a chunk of pixels. + */ +static int +ZIPEncode(TIFF* tif, uint8* bp, tmsize_t cc, uint16 s) +{ + static const char module[] = "ZIPEncode"; + ZIPState *sp = EncoderState(tif); + + assert(sp != NULL); + assert(sp->state == ZSTATE_INIT_ENCODE); + + (void) s; + sp->stream.next_in = bp; + assert(sizeof(sp->stream.avail_in)==4); /* if this assert gets raised, + we need to simplify this code to reflect a ZLib that is likely updated + to deal with 8byte memory sizes, though this code will respond + apropriately even before we simplify it */ + sp->stream.avail_in = (uInt) cc; + if ((tmsize_t)sp->stream.avail_in != cc) + { + TIFFErrorExt(tif->tif_clientdata, module, "ZLib cannot deal with buffers this size"); + return (0); + } + do { + if (deflate(&sp->stream, Z_NO_FLUSH) != Z_OK) { + TIFFErrorExt(tif->tif_clientdata, module, "Encoder error: %s", + sp->stream.msg); + return (0); + } + if (sp->stream.avail_out == 0) { + tif->tif_rawcc = tif->tif_rawdatasize; + TIFFFlushData1(tif); + sp->stream.next_out = tif->tif_rawdata; + sp->stream.avail_out = (uInt) tif->tif_rawdatasize; /* this is a safe typecast, as check is made already in ZIPPreEncode */ + } + } while (sp->stream.avail_in > 0); + return (1); +} + +/* + * Finish off an encoded strip by flushing the last + * string and tacking on an End Of Information code. + */ +static int +ZIPPostEncode(TIFF* tif) +{ + static const char module[] = "ZIPPostEncode"; + ZIPState *sp = EncoderState(tif); + int state; + + sp->stream.avail_in = 0; + do { + state = deflate(&sp->stream, Z_FINISH); + switch (state) { + case Z_STREAM_END: + case Z_OK: + if ((tmsize_t)sp->stream.avail_out != tif->tif_rawdatasize) + { + tif->tif_rawcc = tif->tif_rawdatasize - sp->stream.avail_out; + TIFFFlushData1(tif); + sp->stream.next_out = tif->tif_rawdata; + sp->stream.avail_out = (uInt) tif->tif_rawdatasize; /* this is a safe typecast, as check is made already in ZIPPreEncode */ + } + break; + default: + TIFFErrorExt(tif->tif_clientdata, module, "ZLib error: %s", + sp->stream.msg); + return (0); + } + } while (state != Z_STREAM_END); + return (1); +} + +static void +ZIPCleanup(TIFF* tif) +{ + ZIPState* sp = ZState(tif); + + assert(sp != 0); + + (void)TIFFPredictorCleanup(tif); + + tif->tif_tagmethods.vgetfield = sp->vgetparent; + tif->tif_tagmethods.vsetfield = sp->vsetparent; + + if (sp->state & ZSTATE_INIT_ENCODE) { + deflateEnd(&sp->stream); + sp->state = 0; + } else if( sp->state & ZSTATE_INIT_DECODE) { + inflateEnd(&sp->stream); + sp->state = 0; + } + _TIFFfree(sp); + tif->tif_data = NULL; + + _TIFFSetDefaultCompressionState(tif); +} + +static int +ZIPVSetField(TIFF* tif, uint32 tag, va_list ap) +{ + static const char module[] = "ZIPVSetField"; + ZIPState* sp = ZState(tif); + + switch (tag) { + case TIFFTAG_ZIPQUALITY: + sp->zipquality = (int) va_arg(ap, int); + if ( sp->state&ZSTATE_INIT_ENCODE ) { + if (deflateParams(&sp->stream, + sp->zipquality, Z_DEFAULT_STRATEGY) != Z_OK) { + TIFFErrorExt(tif->tif_clientdata, module, "ZLib error: %s", + sp->stream.msg); + return (0); + } + } + return (1); + default: + return (*sp->vsetparent)(tif, tag, ap); + } + /*NOTREACHED*/ +} + +static int +ZIPVGetField(TIFF* tif, uint32 tag, va_list ap) +{ + ZIPState* sp = ZState(tif); + + switch (tag) { + case TIFFTAG_ZIPQUALITY: + *va_arg(ap, int*) = sp->zipquality; + break; + default: + return (*sp->vgetparent)(tif, tag, ap); + } + return (1); +} + +static const TIFFField zipFields[] = { + { TIFFTAG_ZIPQUALITY, 0, 0, TIFF_ANY, 0, TIFF_SETGET_INT, TIFF_SETGET_UNDEFINED, FIELD_PSEUDO, TRUE, FALSE, "", NULL }, +}; + +int +TIFFInitZIP(TIFF* tif, int scheme) +{ + static const char module[] = "TIFFInitZIP"; + ZIPState* sp; + + assert( (scheme == COMPRESSION_DEFLATE) + || (scheme == COMPRESSION_ADOBE_DEFLATE)); + + /* + * Merge codec-specific tag information. + */ + if (!_TIFFMergeFields(tif, zipFields, TIFFArrayCount(zipFields))) { + TIFFErrorExt(tif->tif_clientdata, module, + "Merging Deflate codec-specific tags failed"); + return 0; + } + + /* + * Allocate state block so tag methods have storage to record values. + */ + tif->tif_data = (uint8*) _TIFFmalloc(sizeof (ZIPState)); + if (tif->tif_data == NULL) + goto bad; + sp = ZState(tif); + sp->stream.zalloc = NULL; + sp->stream.zfree = NULL; + sp->stream.opaque = NULL; + sp->stream.data_type = Z_BINARY; + + /* + * Override parent get/set field methods. + */ + sp->vgetparent = tif->tif_tagmethods.vgetfield; + tif->tif_tagmethods.vgetfield = ZIPVGetField; /* hook for codec tags */ + sp->vsetparent = tif->tif_tagmethods.vsetfield; + tif->tif_tagmethods.vsetfield = ZIPVSetField; /* hook for codec tags */ + + /* Default values for codec-specific fields */ + sp->zipquality = Z_DEFAULT_COMPRESSION; /* default comp. level */ + sp->state = 0; + + /* + * Install codec methods. + */ + tif->tif_fixuptags = ZIPFixupTags; + tif->tif_setupdecode = ZIPSetupDecode; + tif->tif_predecode = ZIPPreDecode; + tif->tif_decoderow = ZIPDecode; + tif->tif_decodestrip = ZIPDecode; + tif->tif_decodetile = ZIPDecode; + tif->tif_setupencode = ZIPSetupEncode; + tif->tif_preencode = ZIPPreEncode; + tif->tif_postencode = ZIPPostEncode; + tif->tif_encoderow = ZIPEncode; + tif->tif_encodestrip = ZIPEncode; + tif->tif_encodetile = ZIPEncode; + tif->tif_cleanup = ZIPCleanup; + /* + * Setup predictor setup. + */ + (void) TIFFPredictorInit(tif); + return (1); +bad: + TIFFErrorExt(tif->tif_clientdata, module, + "No space for ZIP state block"); + return (0); +} +#endif /* ZIP_SUPORT */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tiff.h b/src/SDL2/external/tiff-4.0.3/libtiff/tiff.h new file mode 100644 index 000000000..19b4e7976 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tiff.h @@ -0,0 +1,678 @@ +/* $Id: tiff.h,v 1.68 2012-08-19 16:56:35 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _TIFF_ +#define _TIFF_ + +#include "tiffconf.h" + +/* + * Tag Image File Format (TIFF) + * + * Based on Rev 6.0 from: + * Developer's Desk + * Aldus Corporation + * 411 First Ave. South + * Suite 200 + * Seattle, WA 98104 + * 206-622-5500 + * + * (http://partners.adobe.com/asn/developer/PDFS/TN/TIFF6.pdf) + * + * For BigTIFF design notes see the following links + * http://www.remotesensing.org/libtiff/bigtiffdesign.html + * http://www.awaresystems.be/imaging/tiff/bigtiff.html + */ + +#define TIFF_VERSION_CLASSIC 42 +#define TIFF_VERSION_BIG 43 + +#define TIFF_BIGENDIAN 0x4d4d +#define TIFF_LITTLEENDIAN 0x4949 +#define MDI_LITTLEENDIAN 0x5045 +#define MDI_BIGENDIAN 0x4550 + +/* + * Intrinsic data types required by the file format: + * + * 8-bit quantities int8/uint8 + * 16-bit quantities int16/uint16 + * 32-bit quantities int32/uint32 + * 64-bit quantities int64/uint64 + * strings unsigned char* + */ + +typedef TIFF_INT8_T int8; +typedef TIFF_UINT8_T uint8; + +typedef TIFF_INT16_T int16; +typedef TIFF_UINT16_T uint16; + +typedef TIFF_INT32_T int32; +typedef TIFF_UINT32_T uint32; + +typedef TIFF_INT64_T int64; +typedef TIFF_UINT64_T uint64; + +/* + * Some types as promoted in a variable argument list + * We use uint16_vap rather then directly using int, because this way + * we document the type we actually want to pass through, conceptually, + * rather then confusing the issue by merely stating the type it gets + * promoted to + */ + +typedef int uint16_vap; + +/* + * TIFF header. + */ +typedef struct { + uint16 tiff_magic; /* magic number (defines byte order) */ + uint16 tiff_version; /* TIFF version number */ +} TIFFHeaderCommon; +typedef struct { + uint16 tiff_magic; /* magic number (defines byte order) */ + uint16 tiff_version; /* TIFF version number */ + uint32 tiff_diroff; /* byte offset to first directory */ +} TIFFHeaderClassic; +typedef struct { + uint16 tiff_magic; /* magic number (defines byte order) */ + uint16 tiff_version; /* TIFF version number */ + uint16 tiff_offsetsize; /* size of offsets, should be 8 */ + uint16 tiff_unused; /* unused word, should be 0 */ + uint64 tiff_diroff; /* byte offset to first directory */ +} TIFFHeaderBig; + + +/* + * NB: In the comments below, + * - items marked with a + are obsoleted by revision 5.0, + * - items marked with a ! are introduced in revision 6.0. + * - items marked with a % are introduced post revision 6.0. + * - items marked with a $ are obsoleted by revision 6.0. + * - items marked with a & are introduced by Adobe DNG specification. + */ + +/* + * Tag data type information. + * + * Note: RATIONALs are the ratio of two 32-bit integer values. + */ +typedef enum { + TIFF_NOTYPE = 0, /* placeholder */ + TIFF_BYTE = 1, /* 8-bit unsigned integer */ + TIFF_ASCII = 2, /* 8-bit bytes w/ last byte null */ + TIFF_SHORT = 3, /* 16-bit unsigned integer */ + TIFF_LONG = 4, /* 32-bit unsigned integer */ + TIFF_RATIONAL = 5, /* 64-bit unsigned fraction */ + TIFF_SBYTE = 6, /* !8-bit signed integer */ + TIFF_UNDEFINED = 7, /* !8-bit untyped data */ + TIFF_SSHORT = 8, /* !16-bit signed integer */ + TIFF_SLONG = 9, /* !32-bit signed integer */ + TIFF_SRATIONAL = 10, /* !64-bit signed fraction */ + TIFF_FLOAT = 11, /* !32-bit IEEE floating point */ + TIFF_DOUBLE = 12, /* !64-bit IEEE floating point */ + TIFF_IFD = 13, /* %32-bit unsigned integer (offset) */ + TIFF_LONG8 = 16, /* BigTIFF 64-bit unsigned integer */ + TIFF_SLONG8 = 17, /* BigTIFF 64-bit signed integer */ + TIFF_IFD8 = 18 /* BigTIFF 64-bit unsigned integer (offset) */ +} TIFFDataType; + +/* + * TIFF Tag Definitions. + */ +#define TIFFTAG_SUBFILETYPE 254 /* subfile data descriptor */ +#define FILETYPE_REDUCEDIMAGE 0x1 /* reduced resolution version */ +#define FILETYPE_PAGE 0x2 /* one page of many */ +#define FILETYPE_MASK 0x4 /* transparency mask */ +#define TIFFTAG_OSUBFILETYPE 255 /* +kind of data in subfile */ +#define OFILETYPE_IMAGE 1 /* full resolution image data */ +#define OFILETYPE_REDUCEDIMAGE 2 /* reduced size image data */ +#define OFILETYPE_PAGE 3 /* one page of many */ +#define TIFFTAG_IMAGEWIDTH 256 /* image width in pixels */ +#define TIFFTAG_IMAGELENGTH 257 /* image height in pixels */ +#define TIFFTAG_BITSPERSAMPLE 258 /* bits per channel (sample) */ +#define TIFFTAG_COMPRESSION 259 /* data compression technique */ +#define COMPRESSION_NONE 1 /* dump mode */ +#define COMPRESSION_CCITTRLE 2 /* CCITT modified Huffman RLE */ +#define COMPRESSION_CCITTFAX3 3 /* CCITT Group 3 fax encoding */ +#define COMPRESSION_CCITT_T4 3 /* CCITT T.4 (TIFF 6 name) */ +#define COMPRESSION_CCITTFAX4 4 /* CCITT Group 4 fax encoding */ +#define COMPRESSION_CCITT_T6 4 /* CCITT T.6 (TIFF 6 name) */ +#define COMPRESSION_LZW 5 /* Lempel-Ziv & Welch */ +#define COMPRESSION_OJPEG 6 /* !6.0 JPEG */ +#define COMPRESSION_JPEG 7 /* %JPEG DCT compression */ +#define COMPRESSION_T85 9 /* !TIFF/FX T.85 JBIG compression */ +#define COMPRESSION_T43 10 /* !TIFF/FX T.43 colour by layered JBIG compression */ +#define COMPRESSION_NEXT 32766 /* NeXT 2-bit RLE */ +#define COMPRESSION_CCITTRLEW 32771 /* #1 w/ word alignment */ +#define COMPRESSION_PACKBITS 32773 /* Macintosh RLE */ +#define COMPRESSION_THUNDERSCAN 32809 /* ThunderScan RLE */ +/* codes 32895-32898 are reserved for ANSI IT8 TIFF/IT */ +#define COMPRESSION_DCS 32947 /* Kodak DCS encoding */ +#define COMPRESSION_JBIG 34661 /* ISO JBIG */ +#define COMPRESSION_SGILOG 34676 /* SGI Log Luminance RLE */ +#define COMPRESSION_SGILOG24 34677 /* SGI Log 24-bit packed */ +#define COMPRESSION_JP2000 34712 /* Leadtools JPEG2000 */ +#define COMPRESSION_LZMA 34925 /* LZMA2 */ +#define TIFFTAG_PHOTOMETRIC 262 /* photometric interpretation */ +#define PHOTOMETRIC_MINISWHITE 0 /* min value is white */ +#define PHOTOMETRIC_MINISBLACK 1 /* min value is black */ +#define PHOTOMETRIC_RGB 2 /* RGB color model */ +#define PHOTOMETRIC_PALETTE 3 /* color map indexed */ +#define PHOTOMETRIC_MASK 4 /* $holdout mask */ +#define PHOTOMETRIC_SEPARATED 5 /* !color separations */ +#define PHOTOMETRIC_YCBCR 6 /* !CCIR 601 */ +#define PHOTOMETRIC_CIELAB 8 /* !1976 CIE L*a*b* */ +#define PHOTOMETRIC_ICCLAB 9 /* ICC L*a*b* [Adobe TIFF Technote 4] */ +#define PHOTOMETRIC_ITULAB 10 /* ITU L*a*b* */ +#define PHOTOMETRIC_LOGL 32844 /* CIE Log2(L) */ +#define PHOTOMETRIC_LOGLUV 32845 /* CIE Log2(L) (u',v') */ +#define TIFFTAG_THRESHHOLDING 263 /* +thresholding used on data */ +#define THRESHHOLD_BILEVEL 1 /* b&w art scan */ +#define THRESHHOLD_HALFTONE 2 /* or dithered scan */ +#define THRESHHOLD_ERRORDIFFUSE 3 /* usually floyd-steinberg */ +#define TIFFTAG_CELLWIDTH 264 /* +dithering matrix width */ +#define TIFFTAG_CELLLENGTH 265 /* +dithering matrix height */ +#define TIFFTAG_FILLORDER 266 /* data order within a byte */ +#define FILLORDER_MSB2LSB 1 /* most significant -> least */ +#define FILLORDER_LSB2MSB 2 /* least significant -> most */ +#define TIFFTAG_DOCUMENTNAME 269 /* name of doc. image is from */ +#define TIFFTAG_IMAGEDESCRIPTION 270 /* info about image */ +#define TIFFTAG_MAKE 271 /* scanner manufacturer name */ +#define TIFFTAG_MODEL 272 /* scanner model name/number */ +#define TIFFTAG_STRIPOFFSETS 273 /* offsets to data strips */ +#define TIFFTAG_ORIENTATION 274 /* +image orientation */ +#define ORIENTATION_TOPLEFT 1 /* row 0 top, col 0 lhs */ +#define ORIENTATION_TOPRIGHT 2 /* row 0 top, col 0 rhs */ +#define ORIENTATION_BOTRIGHT 3 /* row 0 bottom, col 0 rhs */ +#define ORIENTATION_BOTLEFT 4 /* row 0 bottom, col 0 lhs */ +#define ORIENTATION_LEFTTOP 5 /* row 0 lhs, col 0 top */ +#define ORIENTATION_RIGHTTOP 6 /* row 0 rhs, col 0 top */ +#define ORIENTATION_RIGHTBOT 7 /* row 0 rhs, col 0 bottom */ +#define ORIENTATION_LEFTBOT 8 /* row 0 lhs, col 0 bottom */ +#define TIFFTAG_SAMPLESPERPIXEL 277 /* samples per pixel */ +#define TIFFTAG_ROWSPERSTRIP 278 /* rows per strip of data */ +#define TIFFTAG_STRIPBYTECOUNTS 279 /* bytes counts for strips */ +#define TIFFTAG_MINSAMPLEVALUE 280 /* +minimum sample value */ +#define TIFFTAG_MAXSAMPLEVALUE 281 /* +maximum sample value */ +#define TIFFTAG_XRESOLUTION 282 /* pixels/resolution in x */ +#define TIFFTAG_YRESOLUTION 283 /* pixels/resolution in y */ +#define TIFFTAG_PLANARCONFIG 284 /* storage organization */ +#define PLANARCONFIG_CONTIG 1 /* single image plane */ +#define PLANARCONFIG_SEPARATE 2 /* separate planes of data */ +#define TIFFTAG_PAGENAME 285 /* page name image is from */ +#define TIFFTAG_XPOSITION 286 /* x page offset of image lhs */ +#define TIFFTAG_YPOSITION 287 /* y page offset of image lhs */ +#define TIFFTAG_FREEOFFSETS 288 /* +byte offset to free block */ +#define TIFFTAG_FREEBYTECOUNTS 289 /* +sizes of free blocks */ +#define TIFFTAG_GRAYRESPONSEUNIT 290 /* $gray scale curve accuracy */ +#define GRAYRESPONSEUNIT_10S 1 /* tenths of a unit */ +#define GRAYRESPONSEUNIT_100S 2 /* hundredths of a unit */ +#define GRAYRESPONSEUNIT_1000S 3 /* thousandths of a unit */ +#define GRAYRESPONSEUNIT_10000S 4 /* ten-thousandths of a unit */ +#define GRAYRESPONSEUNIT_100000S 5 /* hundred-thousandths */ +#define TIFFTAG_GRAYRESPONSECURVE 291 /* $gray scale response curve */ +#define TIFFTAG_GROUP3OPTIONS 292 /* 32 flag bits */ +#define TIFFTAG_T4OPTIONS 292 /* TIFF 6.0 proper name alias */ +#define GROUP3OPT_2DENCODING 0x1 /* 2-dimensional coding */ +#define GROUP3OPT_UNCOMPRESSED 0x2 /* data not compressed */ +#define GROUP3OPT_FILLBITS 0x4 /* fill to byte boundary */ +#define TIFFTAG_GROUP4OPTIONS 293 /* 32 flag bits */ +#define TIFFTAG_T6OPTIONS 293 /* TIFF 6.0 proper name */ +#define GROUP4OPT_UNCOMPRESSED 0x2 /* data not compressed */ +#define TIFFTAG_RESOLUTIONUNIT 296 /* units of resolutions */ +#define RESUNIT_NONE 1 /* no meaningful units */ +#define RESUNIT_INCH 2 /* english */ +#define RESUNIT_CENTIMETER 3 /* metric */ +#define TIFFTAG_PAGENUMBER 297 /* page numbers of multi-page */ +#define TIFFTAG_COLORRESPONSEUNIT 300 /* $color curve accuracy */ +#define COLORRESPONSEUNIT_10S 1 /* tenths of a unit */ +#define COLORRESPONSEUNIT_100S 2 /* hundredths of a unit */ +#define COLORRESPONSEUNIT_1000S 3 /* thousandths of a unit */ +#define COLORRESPONSEUNIT_10000S 4 /* ten-thousandths of a unit */ +#define COLORRESPONSEUNIT_100000S 5 /* hundred-thousandths */ +#define TIFFTAG_TRANSFERFUNCTION 301 /* !colorimetry info */ +#define TIFFTAG_SOFTWARE 305 /* name & release */ +#define TIFFTAG_DATETIME 306 /* creation date and time */ +#define TIFFTAG_ARTIST 315 /* creator of image */ +#define TIFFTAG_HOSTCOMPUTER 316 /* machine where created */ +#define TIFFTAG_PREDICTOR 317 /* prediction scheme w/ LZW */ +#define PREDICTOR_NONE 1 /* no prediction scheme used */ +#define PREDICTOR_HORIZONTAL 2 /* horizontal differencing */ +#define PREDICTOR_FLOATINGPOINT 3 /* floating point predictor */ +#define TIFFTAG_WHITEPOINT 318 /* image white point */ +#define TIFFTAG_PRIMARYCHROMATICITIES 319 /* !primary chromaticities */ +#define TIFFTAG_COLORMAP 320 /* RGB map for pallette image */ +#define TIFFTAG_HALFTONEHINTS 321 /* !highlight+shadow info */ +#define TIFFTAG_TILEWIDTH 322 /* !tile width in pixels */ +#define TIFFTAG_TILELENGTH 323 /* !tile height in pixels */ +#define TIFFTAG_TILEOFFSETS 324 /* !offsets to data tiles */ +#define TIFFTAG_TILEBYTECOUNTS 325 /* !byte counts for tiles */ +#define TIFFTAG_BADFAXLINES 326 /* lines w/ wrong pixel count */ +#define TIFFTAG_CLEANFAXDATA 327 /* regenerated line info */ +#define CLEANFAXDATA_CLEAN 0 /* no errors detected */ +#define CLEANFAXDATA_REGENERATED 1 /* receiver regenerated lines */ +#define CLEANFAXDATA_UNCLEAN 2 /* uncorrected errors exist */ +#define TIFFTAG_CONSECUTIVEBADFAXLINES 328 /* max consecutive bad lines */ +#define TIFFTAG_SUBIFD 330 /* subimage descriptors */ +#define TIFFTAG_INKSET 332 /* !inks in separated image */ +#define INKSET_CMYK 1 /* !cyan-magenta-yellow-black color */ +#define INKSET_MULTIINK 2 /* !multi-ink or hi-fi color */ +#define TIFFTAG_INKNAMES 333 /* !ascii names of inks */ +#define TIFFTAG_NUMBEROFINKS 334 /* !number of inks */ +#define TIFFTAG_DOTRANGE 336 /* !0% and 100% dot codes */ +#define TIFFTAG_TARGETPRINTER 337 /* !separation target */ +#define TIFFTAG_EXTRASAMPLES 338 /* !info about extra samples */ +#define EXTRASAMPLE_UNSPECIFIED 0 /* !unspecified data */ +#define EXTRASAMPLE_ASSOCALPHA 1 /* !associated alpha data */ +#define EXTRASAMPLE_UNASSALPHA 2 /* !unassociated alpha data */ +#define TIFFTAG_SAMPLEFORMAT 339 /* !data sample format */ +#define SAMPLEFORMAT_UINT 1 /* !unsigned integer data */ +#define SAMPLEFORMAT_INT 2 /* !signed integer data */ +#define SAMPLEFORMAT_IEEEFP 3 /* !IEEE floating point data */ +#define SAMPLEFORMAT_VOID 4 /* !untyped data */ +#define SAMPLEFORMAT_COMPLEXINT 5 /* !complex signed int */ +#define SAMPLEFORMAT_COMPLEXIEEEFP 6 /* !complex ieee floating */ +#define TIFFTAG_SMINSAMPLEVALUE 340 /* !variable MinSampleValue */ +#define TIFFTAG_SMAXSAMPLEVALUE 341 /* !variable MaxSampleValue */ +#define TIFFTAG_CLIPPATH 343 /* %ClipPath + [Adobe TIFF technote 2] */ +#define TIFFTAG_XCLIPPATHUNITS 344 /* %XClipPathUnits + [Adobe TIFF technote 2] */ +#define TIFFTAG_YCLIPPATHUNITS 345 /* %YClipPathUnits + [Adobe TIFF technote 2] */ +#define TIFFTAG_INDEXED 346 /* %Indexed + [Adobe TIFF Technote 3] */ +#define TIFFTAG_JPEGTABLES 347 /* %JPEG table stream */ +#define TIFFTAG_OPIPROXY 351 /* %OPI Proxy [Adobe TIFF technote] */ +/* Tags 400-435 are from the TIFF/FX spec */ +#define TIFFTAG_GLOBALPARAMETERSIFD 400 /* ! */ +#define TIFFTAG_PROFILETYPE 401 /* ! */ +#define PROFILETYPE_UNSPECIFIED 0 /* ! */ +#define PROFILETYPE_G3_FAX 1 /* ! */ +#define TIFFTAG_FAXPROFILE 402 /* ! */ +#define FAXPROFILE_S 1 /* !TIFF/FX FAX profile S */ +#define FAXPROFILE_F 2 /* !TIFF/FX FAX profile F */ +#define FAXPROFILE_J 3 /* !TIFF/FX FAX profile J */ +#define FAXPROFILE_C 4 /* !TIFF/FX FAX profile C */ +#define FAXPROFILE_L 5 /* !TIFF/FX FAX profile L */ +#define FAXPROFILE_M 6 /* !TIFF/FX FAX profile LM */ +#define TIFFTAG_CODINGMETHODS 403 /* !TIFF/FX coding methods */ +#define CODINGMETHODS_T4_1D (1 << 1) /* !T.4 1D */ +#define CODINGMETHODS_T4_2D (1 << 2) /* !T.4 2D */ +#define CODINGMETHODS_T6 (1 << 3) /* !T.6 */ +#define CODINGMETHODS_T85 (1 << 4) /* !T.85 JBIG */ +#define CODINGMETHODS_T42 (1 << 5) /* !T.42 JPEG */ +#define CODINGMETHODS_T43 (1 << 6) /* !T.43 colour by layered JBIG */ +#define TIFFTAG_VERSIONYEAR 404 /* !TIFF/FX version year */ +#define TIFFTAG_MODENUMBER 405 /* !TIFF/FX mode number */ +#define TIFFTAG_DECODE 433 /* !TIFF/FX decode */ +#define TIFFTAG_IMAGEBASECOLOR 434 /* !TIFF/FX image base colour */ +#define TIFFTAG_T82OPTIONS 435 /* !TIFF/FX T.82 options */ +/* + * Tags 512-521 are obsoleted by Technical Note #2 which specifies a + * revised JPEG-in-TIFF scheme. + */ +#define TIFFTAG_JPEGPROC 512 /* !JPEG processing algorithm */ +#define JPEGPROC_BASELINE 1 /* !baseline sequential */ +#define JPEGPROC_LOSSLESS 14 /* !Huffman coded lossless */ +#define TIFFTAG_JPEGIFOFFSET 513 /* !pointer to SOI marker */ +#define TIFFTAG_JPEGIFBYTECOUNT 514 /* !JFIF stream length */ +#define TIFFTAG_JPEGRESTARTINTERVAL 515 /* !restart interval length */ +#define TIFFTAG_JPEGLOSSLESSPREDICTORS 517 /* !lossless proc predictor */ +#define TIFFTAG_JPEGPOINTTRANSFORM 518 /* !lossless point transform */ +#define TIFFTAG_JPEGQTABLES 519 /* !Q matrice offsets */ +#define TIFFTAG_JPEGDCTABLES 520 /* !DCT table offsets */ +#define TIFFTAG_JPEGACTABLES 521 /* !AC coefficient offsets */ +#define TIFFTAG_YCBCRCOEFFICIENTS 529 /* !RGB -> YCbCr transform */ +#define TIFFTAG_YCBCRSUBSAMPLING 530 /* !YCbCr subsampling factors */ +#define TIFFTAG_YCBCRPOSITIONING 531 /* !subsample positioning */ +#define YCBCRPOSITION_CENTERED 1 /* !as in PostScript Level 2 */ +#define YCBCRPOSITION_COSITED 2 /* !as in CCIR 601-1 */ +#define TIFFTAG_REFERENCEBLACKWHITE 532 /* !colorimetry info */ +#define TIFFTAG_STRIPROWCOUNTS 559 /* !TIFF/FX strip row counts */ +#define TIFFTAG_XMLPACKET 700 /* %XML packet + [Adobe XMP Specification, + January 2004 */ +#define TIFFTAG_OPIIMAGEID 32781 /* %OPI ImageID + [Adobe TIFF technote] */ +/* tags 32952-32956 are private tags registered to Island Graphics */ +#define TIFFTAG_REFPTS 32953 /* image reference points */ +#define TIFFTAG_REGIONTACKPOINT 32954 /* region-xform tack point */ +#define TIFFTAG_REGIONWARPCORNERS 32955 /* warp quadrilateral */ +#define TIFFTAG_REGIONAFFINE 32956 /* affine transformation mat */ +/* tags 32995-32999 are private tags registered to SGI */ +#define TIFFTAG_MATTEING 32995 /* $use ExtraSamples */ +#define TIFFTAG_DATATYPE 32996 /* $use SampleFormat */ +#define TIFFTAG_IMAGEDEPTH 32997 /* z depth of image */ +#define TIFFTAG_TILEDEPTH 32998 /* z depth/data tile */ +/* tags 33300-33309 are private tags registered to Pixar */ +/* + * TIFFTAG_PIXAR_IMAGEFULLWIDTH and TIFFTAG_PIXAR_IMAGEFULLLENGTH + * are set when an image has been cropped out of a larger image. + * They reflect the size of the original uncropped image. + * The TIFFTAG_XPOSITION and TIFFTAG_YPOSITION can be used + * to determine the position of the smaller image in the larger one. + */ +#define TIFFTAG_PIXAR_IMAGEFULLWIDTH 33300 /* full image size in x */ +#define TIFFTAG_PIXAR_IMAGEFULLLENGTH 33301 /* full image size in y */ + /* Tags 33302-33306 are used to identify special image modes and data + * used by Pixar's texture formats. + */ +#define TIFFTAG_PIXAR_TEXTUREFORMAT 33302 /* texture map format */ +#define TIFFTAG_PIXAR_WRAPMODES 33303 /* s & t wrap modes */ +#define TIFFTAG_PIXAR_FOVCOT 33304 /* cotan(fov) for env. maps */ +#define TIFFTAG_PIXAR_MATRIX_WORLDTOSCREEN 33305 +#define TIFFTAG_PIXAR_MATRIX_WORLDTOCAMERA 33306 +/* tag 33405 is a private tag registered to Eastman Kodak */ +#define TIFFTAG_WRITERSERIALNUMBER 33405 /* device serial number */ +/* tag 33432 is listed in the 6.0 spec w/ unknown ownership */ +#define TIFFTAG_COPYRIGHT 33432 /* copyright string */ +/* IPTC TAG from RichTIFF specifications */ +#define TIFFTAG_RICHTIFFIPTC 33723 +/* 34016-34029 are reserved for ANSI IT8 TIFF/IT */ +#define TIFFTAG_STONITS 37439 /* Sample value to Nits */ +/* tag 34929 is a private tag registered to FedEx */ +#define TIFFTAG_FEDEX_EDR 34929 /* unknown use */ +#define TIFFTAG_INTEROPERABILITYIFD 40965 /* Pointer to Interoperability private directory */ +/* Adobe Digital Negative (DNG) format tags */ +#define TIFFTAG_DNGVERSION 50706 /* &DNG version number */ +#define TIFFTAG_DNGBACKWARDVERSION 50707 /* &DNG compatibility version */ +#define TIFFTAG_UNIQUECAMERAMODEL 50708 /* &name for the camera model */ +#define TIFFTAG_LOCALIZEDCAMERAMODEL 50709 /* &localized camera model + name */ +#define TIFFTAG_CFAPLANECOLOR 50710 /* &CFAPattern->LinearRaw space + mapping */ +#define TIFFTAG_CFALAYOUT 50711 /* &spatial layout of the CFA */ +#define TIFFTAG_LINEARIZATIONTABLE 50712 /* &lookup table description */ +#define TIFFTAG_BLACKLEVELREPEATDIM 50713 /* &repeat pattern size for + the BlackLevel tag */ +#define TIFFTAG_BLACKLEVEL 50714 /* &zero light encoding level */ +#define TIFFTAG_BLACKLEVELDELTAH 50715 /* &zero light encoding level + differences (columns) */ +#define TIFFTAG_BLACKLEVELDELTAV 50716 /* &zero light encoding level + differences (rows) */ +#define TIFFTAG_WHITELEVEL 50717 /* &fully saturated encoding + level */ +#define TIFFTAG_DEFAULTSCALE 50718 /* &default scale factors */ +#define TIFFTAG_DEFAULTCROPORIGIN 50719 /* &origin of the final image + area */ +#define TIFFTAG_DEFAULTCROPSIZE 50720 /* &size of the final image + area */ +#define TIFFTAG_COLORMATRIX1 50721 /* &XYZ->reference color space + transformation matrix 1 */ +#define TIFFTAG_COLORMATRIX2 50722 /* &XYZ->reference color space + transformation matrix 2 */ +#define TIFFTAG_CAMERACALIBRATION1 50723 /* &calibration matrix 1 */ +#define TIFFTAG_CAMERACALIBRATION2 50724 /* &calibration matrix 2 */ +#define TIFFTAG_REDUCTIONMATRIX1 50725 /* &dimensionality reduction + matrix 1 */ +#define TIFFTAG_REDUCTIONMATRIX2 50726 /* &dimensionality reduction + matrix 2 */ +#define TIFFTAG_ANALOGBALANCE 50727 /* &gain applied the stored raw + values*/ +#define TIFFTAG_ASSHOTNEUTRAL 50728 /* &selected white balance in + linear reference space */ +#define TIFFTAG_ASSHOTWHITEXY 50729 /* &selected white balance in + x-y chromaticity + coordinates */ +#define TIFFTAG_BASELINEEXPOSURE 50730 /* &how much to move the zero + point */ +#define TIFFTAG_BASELINENOISE 50731 /* &relative noise level */ +#define TIFFTAG_BASELINESHARPNESS 50732 /* &relative amount of + sharpening */ +#define TIFFTAG_BAYERGREENSPLIT 50733 /* &how closely the values of + the green pixels in the + blue/green rows track the + values of the green pixels + in the red/green rows */ +#define TIFFTAG_LINEARRESPONSELIMIT 50734 /* &non-linear encoding range */ +#define TIFFTAG_CAMERASERIALNUMBER 50735 /* &camera's serial number */ +#define TIFFTAG_LENSINFO 50736 /* info about the lens */ +#define TIFFTAG_CHROMABLURRADIUS 50737 /* &chroma blur radius */ +#define TIFFTAG_ANTIALIASSTRENGTH 50738 /* &relative strength of the + camera's anti-alias filter */ +#define TIFFTAG_SHADOWSCALE 50739 /* &used by Adobe Camera Raw */ +#define TIFFTAG_DNGPRIVATEDATA 50740 /* &manufacturer's private data */ +#define TIFFTAG_MAKERNOTESAFETY 50741 /* &whether the EXIF MakerNote + tag is safe to preserve + along with the rest of the + EXIF data */ +#define TIFFTAG_CALIBRATIONILLUMINANT1 50778 /* &illuminant 1 */ +#define TIFFTAG_CALIBRATIONILLUMINANT2 50779 /* &illuminant 2 */ +#define TIFFTAG_BESTQUALITYSCALE 50780 /* &best quality multiplier */ +#define TIFFTAG_RAWDATAUNIQUEID 50781 /* &unique identifier for + the raw image data */ +#define TIFFTAG_ORIGINALRAWFILENAME 50827 /* &file name of the original + raw file */ +#define TIFFTAG_ORIGINALRAWFILEDATA 50828 /* &contents of the original + raw file */ +#define TIFFTAG_ACTIVEAREA 50829 /* &active (non-masked) pixels + of the sensor */ +#define TIFFTAG_MASKEDAREAS 50830 /* &list of coordinates + of fully masked pixels */ +#define TIFFTAG_ASSHOTICCPROFILE 50831 /* &these two tags used to */ +#define TIFFTAG_ASSHOTPREPROFILEMATRIX 50832 /* map cameras's color space + into ICC profile space */ +#define TIFFTAG_CURRENTICCPROFILE 50833 /* & */ +#define TIFFTAG_CURRENTPREPROFILEMATRIX 50834 /* & */ +/* tag 65535 is an undefined tag used by Eastman Kodak */ +#define TIFFTAG_DCSHUESHIFTVALUES 65535 /* hue shift correction data */ + +/* + * The following are ``pseudo tags'' that can be used to control + * codec-specific functionality. These tags are not written to file. + * Note that these values start at 0xffff+1 so that they'll never + * collide with Aldus-assigned tags. + * + * If you want your private pseudo tags ``registered'' (i.e. added to + * this file), please post a bug report via the tracking system at + * http://www.remotesensing.org/libtiff/bugs.html with the appropriate + * C definitions to add. + */ +#define TIFFTAG_FAXMODE 65536 /* Group 3/4 format control */ +#define FAXMODE_CLASSIC 0x0000 /* default, include RTC */ +#define FAXMODE_NORTC 0x0001 /* no RTC at end of data */ +#define FAXMODE_NOEOL 0x0002 /* no EOL code at end of row */ +#define FAXMODE_BYTEALIGN 0x0004 /* byte align row */ +#define FAXMODE_WORDALIGN 0x0008 /* word align row */ +#define FAXMODE_CLASSF FAXMODE_NORTC /* TIFF Class F */ +#define TIFFTAG_JPEGQUALITY 65537 /* Compression quality level */ +/* Note: quality level is on the IJG 0-100 scale. Default value is 75 */ +#define TIFFTAG_JPEGCOLORMODE 65538 /* Auto RGB<=>YCbCr convert? */ +#define JPEGCOLORMODE_RAW 0x0000 /* no conversion (default) */ +#define JPEGCOLORMODE_RGB 0x0001 /* do auto conversion */ +#define TIFFTAG_JPEGTABLESMODE 65539 /* What to put in JPEGTables */ +#define JPEGTABLESMODE_QUANT 0x0001 /* include quantization tbls */ +#define JPEGTABLESMODE_HUFF 0x0002 /* include Huffman tbls */ +/* Note: default is JPEGTABLESMODE_QUANT | JPEGTABLESMODE_HUFF */ +#define TIFFTAG_FAXFILLFUNC 65540 /* G3/G4 fill function */ +#define TIFFTAG_PIXARLOGDATAFMT 65549 /* PixarLogCodec I/O data sz */ +#define PIXARLOGDATAFMT_8BIT 0 /* regular u_char samples */ +#define PIXARLOGDATAFMT_8BITABGR 1 /* ABGR-order u_chars */ +#define PIXARLOGDATAFMT_11BITLOG 2 /* 11-bit log-encoded (raw) */ +#define PIXARLOGDATAFMT_12BITPICIO 3 /* as per PICIO (1.0==2048) */ +#define PIXARLOGDATAFMT_16BIT 4 /* signed short samples */ +#define PIXARLOGDATAFMT_FLOAT 5 /* IEEE float samples */ +/* 65550-65556 are allocated to Oceana Matrix */ +#define TIFFTAG_DCSIMAGERTYPE 65550 /* imager model & filter */ +#define DCSIMAGERMODEL_M3 0 /* M3 chip (1280 x 1024) */ +#define DCSIMAGERMODEL_M5 1 /* M5 chip (1536 x 1024) */ +#define DCSIMAGERMODEL_M6 2 /* M6 chip (3072 x 2048) */ +#define DCSIMAGERFILTER_IR 0 /* infrared filter */ +#define DCSIMAGERFILTER_MONO 1 /* monochrome filter */ +#define DCSIMAGERFILTER_CFA 2 /* color filter array */ +#define DCSIMAGERFILTER_OTHER 3 /* other filter */ +#define TIFFTAG_DCSINTERPMODE 65551 /* interpolation mode */ +#define DCSINTERPMODE_NORMAL 0x0 /* whole image, default */ +#define DCSINTERPMODE_PREVIEW 0x1 /* preview of image (384x256) */ +#define TIFFTAG_DCSBALANCEARRAY 65552 /* color balance values */ +#define TIFFTAG_DCSCORRECTMATRIX 65553 /* color correction values */ +#define TIFFTAG_DCSGAMMA 65554 /* gamma value */ +#define TIFFTAG_DCSTOESHOULDERPTS 65555 /* toe & shoulder points */ +#define TIFFTAG_DCSCALIBRATIONFD 65556 /* calibration file desc */ +/* Note: quality level is on the ZLIB 1-9 scale. Default value is -1 */ +#define TIFFTAG_ZIPQUALITY 65557 /* compression quality level */ +#define TIFFTAG_PIXARLOGQUALITY 65558 /* PixarLog uses same scale */ +/* 65559 is allocated to Oceana Matrix */ +#define TIFFTAG_DCSCLIPRECTANGLE 65559 /* area of image to acquire */ +#define TIFFTAG_SGILOGDATAFMT 65560 /* SGILog user data format */ +#define SGILOGDATAFMT_FLOAT 0 /* IEEE float samples */ +#define SGILOGDATAFMT_16BIT 1 /* 16-bit samples */ +#define SGILOGDATAFMT_RAW 2 /* uninterpreted data */ +#define SGILOGDATAFMT_8BIT 3 /* 8-bit RGB monitor values */ +#define TIFFTAG_SGILOGENCODE 65561 /* SGILog data encoding control*/ +#define SGILOGENCODE_NODITHER 0 /* do not dither encoded values*/ +#define SGILOGENCODE_RANDITHER 1 /* randomly dither encd values */ +#define TIFFTAG_LZMAPRESET 65562 /* LZMA2 preset (compression level) */ +#define TIFFTAG_PERSAMPLE 65563 /* interface for per sample tags */ +#define PERSAMPLE_MERGED 0 /* present as a single value */ +#define PERSAMPLE_MULTI 1 /* present as multiple values */ + +/* + * EXIF tags + */ +#define EXIFTAG_EXPOSURETIME 33434 /* Exposure time */ +#define EXIFTAG_FNUMBER 33437 /* F number */ +#define EXIFTAG_EXPOSUREPROGRAM 34850 /* Exposure program */ +#define EXIFTAG_SPECTRALSENSITIVITY 34852 /* Spectral sensitivity */ +#define EXIFTAG_ISOSPEEDRATINGS 34855 /* ISO speed rating */ +#define EXIFTAG_OECF 34856 /* Optoelectric conversion + factor */ +#define EXIFTAG_EXIFVERSION 36864 /* Exif version */ +#define EXIFTAG_DATETIMEORIGINAL 36867 /* Date and time of original + data generation */ +#define EXIFTAG_DATETIMEDIGITIZED 36868 /* Date and time of digital + data generation */ +#define EXIFTAG_COMPONENTSCONFIGURATION 37121 /* Meaning of each component */ +#define EXIFTAG_COMPRESSEDBITSPERPIXEL 37122 /* Image compression mode */ +#define EXIFTAG_SHUTTERSPEEDVALUE 37377 /* Shutter speed */ +#define EXIFTAG_APERTUREVALUE 37378 /* Aperture */ +#define EXIFTAG_BRIGHTNESSVALUE 37379 /* Brightness */ +#define EXIFTAG_EXPOSUREBIASVALUE 37380 /* Exposure bias */ +#define EXIFTAG_MAXAPERTUREVALUE 37381 /* Maximum lens aperture */ +#define EXIFTAG_SUBJECTDISTANCE 37382 /* Subject distance */ +#define EXIFTAG_METERINGMODE 37383 /* Metering mode */ +#define EXIFTAG_LIGHTSOURCE 37384 /* Light source */ +#define EXIFTAG_FLASH 37385 /* Flash */ +#define EXIFTAG_FOCALLENGTH 37386 /* Lens focal length */ +#define EXIFTAG_SUBJECTAREA 37396 /* Subject area */ +#define EXIFTAG_MAKERNOTE 37500 /* Manufacturer notes */ +#define EXIFTAG_USERCOMMENT 37510 /* User comments */ +#define EXIFTAG_SUBSECTIME 37520 /* DateTime subseconds */ +#define EXIFTAG_SUBSECTIMEORIGINAL 37521 /* DateTimeOriginal subseconds */ +#define EXIFTAG_SUBSECTIMEDIGITIZED 37522 /* DateTimeDigitized subseconds */ +#define EXIFTAG_FLASHPIXVERSION 40960 /* Supported Flashpix version */ +#define EXIFTAG_COLORSPACE 40961 /* Color space information */ +#define EXIFTAG_PIXELXDIMENSION 40962 /* Valid image width */ +#define EXIFTAG_PIXELYDIMENSION 40963 /* Valid image height */ +#define EXIFTAG_RELATEDSOUNDFILE 40964 /* Related audio file */ +#define EXIFTAG_FLASHENERGY 41483 /* Flash energy */ +#define EXIFTAG_SPATIALFREQUENCYRESPONSE 41484 /* Spatial frequency response */ +#define EXIFTAG_FOCALPLANEXRESOLUTION 41486 /* Focal plane X resolution */ +#define EXIFTAG_FOCALPLANEYRESOLUTION 41487 /* Focal plane Y resolution */ +#define EXIFTAG_FOCALPLANERESOLUTIONUNIT 41488 /* Focal plane resolution unit */ +#define EXIFTAG_SUBJECTLOCATION 41492 /* Subject location */ +#define EXIFTAG_EXPOSUREINDEX 41493 /* Exposure index */ +#define EXIFTAG_SENSINGMETHOD 41495 /* Sensing method */ +#define EXIFTAG_FILESOURCE 41728 /* File source */ +#define EXIFTAG_SCENETYPE 41729 /* Scene type */ +#define EXIFTAG_CFAPATTERN 41730 /* CFA pattern */ +#define EXIFTAG_CUSTOMRENDERED 41985 /* Custom image processing */ +#define EXIFTAG_EXPOSUREMODE 41986 /* Exposure mode */ +#define EXIFTAG_WHITEBALANCE 41987 /* White balance */ +#define EXIFTAG_DIGITALZOOMRATIO 41988 /* Digital zoom ratio */ +#define EXIFTAG_FOCALLENGTHIN35MMFILM 41989 /* Focal length in 35 mm film */ +#define EXIFTAG_SCENECAPTURETYPE 41990 /* Scene capture type */ +#define EXIFTAG_GAINCONTROL 41991 /* Gain control */ +#define EXIFTAG_CONTRAST 41992 /* Contrast */ +#define EXIFTAG_SATURATION 41993 /* Saturation */ +#define EXIFTAG_SHARPNESS 41994 /* Sharpness */ +#define EXIFTAG_DEVICESETTINGDESCRIPTION 41995 /* Device settings description */ +#define EXIFTAG_SUBJECTDISTANCERANGE 41996 /* Subject distance range */ +#define EXIFTAG_GAINCONTROL 41991 /* Gain control */ +#define EXIFTAG_GAINCONTROL 41991 /* Gain control */ +#define EXIFTAG_IMAGEUNIQUEID 42016 /* Unique image ID */ + +#endif /* _TIFF_ */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.h.in b/src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.h.in new file mode 100644 index 000000000..6da9c5a65 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.h.in @@ -0,0 +1,127 @@ +/* + Configuration defines for installed libtiff. + This file maintained for backward compatibility. Do not use definitions + from this file in your programs. +*/ + +#ifndef _TIFFCONF_ +#define _TIFFCONF_ + +/* Signed 16-bit type */ +#undef TIFF_INT16_T + +/* Signed 32-bit type */ +#undef TIFF_INT32_T + +/* Signed 64-bit type */ +#undef TIFF_INT64_T + +/* Signed 8-bit type */ +#undef TIFF_INT8_T + +/* Unsigned 16-bit type */ +#undef TIFF_UINT16_T + +/* Unsigned 32-bit type */ +#undef TIFF_UINT32_T + +/* Unsigned 64-bit type */ +#undef TIFF_UINT64_T + +/* Unsigned 8-bit type */ +#undef TIFF_UINT8_T + +/* Signed size type */ +#undef TIFF_SSIZE_T + +/* Pointer difference type */ +#undef TIFF_PTRDIFF_T + +/* Define to 1 if the system has the type `int16'. */ +#undef HAVE_INT16 + +/* Define to 1 if the system has the type `int32'. */ +#undef HAVE_INT32 + +/* Define to 1 if the system has the type `int8'. */ +#undef HAVE_INT8 + +/* Compatibility stuff. */ + +/* Define as 0 or 1 according to the floating point format suported by the + machine */ +#undef HAVE_IEEEFP + +/* Set the native cpu bit order (FILLORDER_LSB2MSB or FILLORDER_MSB2LSB) */ +#undef HOST_FILLORDER + +/* Native cpu byte order: 1 if big-endian (Motorola) or 0 if little-endian + (Intel) */ +#undef HOST_BIGENDIAN + +/* Support CCITT Group 3 & 4 algorithms */ +#undef CCITT_SUPPORT + +/* Support JPEG compression (requires IJG JPEG library) */ +#undef JPEG_SUPPORT + +/* Support JBIG compression (requires JBIG-KIT library) */ +#undef JBIG_SUPPORT + +/* Support LogLuv high dynamic range encoding */ +#undef LOGLUV_SUPPORT + +/* Support LZW algorithm */ +#undef LZW_SUPPORT + +/* Support NeXT 2-bit RLE algorithm */ +#undef NEXT_SUPPORT + +/* Support Old JPEG compresson (read contrib/ojpeg/README first! Compilation + fails with unpatched IJG JPEG library) */ +#undef OJPEG_SUPPORT + +/* Support Macintosh PackBits algorithm */ +#undef PACKBITS_SUPPORT + +/* Support Pixar log-format algorithm (requires Zlib) */ +#undef PIXARLOG_SUPPORT + +/* Support ThunderScan 4-bit RLE algorithm */ +#undef THUNDER_SUPPORT + +/* Support Deflate compression */ +#undef ZIP_SUPPORT + +/* Support strip chopping (whether or not to convert single-strip uncompressed + images to mutiple strips of ~8Kb to reduce memory usage) */ +#undef STRIPCHOP_DEFAULT + +/* Enable SubIFD tag (330) support */ +#undef SUBIFD_SUPPORT + +/* Treat extra sample as alpha (default enabled). The RGBA interface will + treat a fourth sample with no EXTRASAMPLE_ value as being ASSOCALPHA. Many + packages produce RGBA files but don't mark the alpha properly. */ +#undef DEFAULT_EXTRASAMPLE_AS_ALPHA + +/* Pick up YCbCr subsampling info from the JPEG data stream to support files + lacking the tag (default enabled). */ +#undef CHECK_JPEG_YCBCR_SUBSAMPLING + +/* Support MS MDI magic number files as TIFF */ +#undef MDI_SUPPORT + +/* + * Feature support definitions. + * XXX: These macros are obsoleted. Don't use them in your apps! + * Macros stays here for backward compatibility and should be always defined. + */ +#define COLORIMETRY_SUPPORT +#define YCBCR_SUPPORT +#define CMYK_SUPPORT +#define ICC_SUPPORT +#define PHOTOSHOP_SUPPORT +#define IPTC_SUPPORT + +#endif /* _TIFFCONF_ */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.vc.h b/src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.vc.h new file mode 100644 index 000000000..680f839f1 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.vc.h @@ -0,0 +1,160 @@ +/* + Configuration defines for installed libtiff. + This file maintained for backward compatibility. Do not use definitions + from this file in your programs. +*/ + +#ifndef _TIFFCONF_ +#define _TIFFCONF_ + +/* Define to 1 if the system has the type `int16'. */ +/* #undef HAVE_INT16 */ + +/* Define to 1 if the system has the type `int32'. */ +/* #undef HAVE_INT32 */ + +/* Define to 1 if the system has the type `int8'. */ +/* #undef HAVE_INT8 */ + +/* The size of a `int', as computed by sizeof. */ +#define SIZEOF_INT 4 + +/* Signed 8-bit type */ +#define TIFF_INT8_T signed char + +/* Unsigned 8-bit type */ +#define TIFF_UINT8_T unsigned char + +/* Signed 16-bit type */ +#define TIFF_INT16_T signed short + +/* Unsigned 16-bit type */ +#define TIFF_UINT16_T unsigned short + +/* Signed 32-bit type formatter */ +#define TIFF_INT32_FORMAT "%d" + +/* Signed 32-bit type */ +#define TIFF_INT32_T signed int + +/* Unsigned 32-bit type formatter */ +#define TIFF_UINT32_FORMAT "%u" + +/* Unsigned 32-bit type */ +#define TIFF_UINT32_T unsigned int + +/* Signed 64-bit type formatter */ +#define TIFF_INT64_FORMAT "%I64d" + +/* Signed 64-bit type */ +#define TIFF_INT64_T signed __int64 + +/* Unsigned 64-bit type formatter */ +#define TIFF_UINT64_FORMAT "%I64u" + +/* Unsigned 64-bit type */ +#define TIFF_UINT64_T unsigned __int64 + +/* Signed size type */ +#if defined(_WIN64) +#define TIFF_SSIZE_T signed __int64 +#else +#define TIFF_SSIZE_T signed int +#endif + +/* Signed size type formatter */ +#if defined(_WIN64) +#define TIFF_SSIZE_FORMAT "%I64d" +#else +#define TIFF_SSIZE_FORMAT "%ld" +#endif + +/* Pointer difference type */ +#define TIFF_PTRDIFF_T long + +/* Compatibility stuff. */ + +/* Define as 0 or 1 according to the floating point format suported by the + machine */ +#define HAVE_IEEEFP 1 + +/* Set the native cpu bit order (FILLORDER_LSB2MSB or FILLORDER_MSB2LSB) */ +#define HOST_FILLORDER FILLORDER_LSB2MSB + +/* Native cpu byte order: 1 if big-endian (Motorola) or 0 if little-endian + (Intel) */ +#define HOST_BIGENDIAN 0 + +/* Support CCITT Group 3 & 4 algorithms */ +#define CCITT_SUPPORT 1 + +/* Support JPEG compression (requires IJG JPEG library) */ +/* #undef JPEG_SUPPORT */ + +/* Support JBIG compression (requires JBIG-KIT library) */ +/* #undef JBIG_SUPPORT */ + +/* Support LogLuv high dynamic range encoding */ +#define LOGLUV_SUPPORT 1 + +/* Support LZW algorithm */ +#define LZW_SUPPORT 1 + +/* Support NeXT 2-bit RLE algorithm */ +#define NEXT_SUPPORT 1 + +/* Support Old JPEG compresson (read contrib/ojpeg/README first! Compilation + fails with unpatched IJG JPEG library) */ +/* #undef OJPEG_SUPPORT */ + +/* Support Macintosh PackBits algorithm */ +#define PACKBITS_SUPPORT 1 + +/* Support Pixar log-format algorithm (requires Zlib) */ +/* #undef PIXARLOG_SUPPORT */ + +/* Support ThunderScan 4-bit RLE algorithm */ +#define THUNDER_SUPPORT 1 + +/* Support Deflate compression */ +/* #undef ZIP_SUPPORT */ + +/* Support strip chopping (whether or not to convert single-strip uncompressed + images to mutiple strips of ~8Kb to reduce memory usage) */ +#define STRIPCHOP_DEFAULT TIFF_STRIPCHOP + +/* Enable SubIFD tag (330) support */ +#define SUBIFD_SUPPORT 1 + +/* Treat extra sample as alpha (default enabled). The RGBA interface will + treat a fourth sample with no EXTRASAMPLE_ value as being ASSOCALPHA. Many + packages produce RGBA files but don't mark the alpha properly. */ +#define DEFAULT_EXTRASAMPLE_AS_ALPHA 1 + +/* Pick up YCbCr subsampling info from the JPEG data stream to support files + lacking the tag (default enabled). */ +#define CHECK_JPEG_YCBCR_SUBSAMPLING 1 + +/* Support MS MDI magic number files as TIFF */ +/* #undef MDI_SUPPORT */ + +/* + * Feature support definitions. + * XXX: These macros are obsoleted. Don't use them in your apps! + * Macros stays here for backward compatibility and should be always defined. + */ +#define COLORIMETRY_SUPPORT +#define YCBCR_SUPPORT +#define CMYK_SUPPORT +#define ICC_SUPPORT +#define PHOTOSHOP_SUPPORT +#define IPTC_SUPPORT + +#endif /* _TIFFCONF_ */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.wince.h b/src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.wince.h new file mode 100644 index 000000000..2ef3958a0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tiffconf.wince.h @@ -0,0 +1,121 @@ +/* $Id: tiffconf.wince.h,v 1.3 2010-03-10 18:56:49 bfriesen Exp $ */ + +/* + * Windows CE platform tiffconf.wince.h + * Created by Mateusz Loskot (mateusz@loskot.net) + * + * NOTE: Requires WCELIBCEX library with wceex_* functions, + * It's an extension to C library on Windows CE platform. + * For example, HAVE_STDIO_H definition indicates there are + * following files available: + * stdio.h - from Windows CE / Windows Mobile SDK + * wce_stdio.h - from WCELIBCEX library + */ + + +/* + Configuration defines for installed libtiff. + This file maintained for backward compatibility. Do not use definitions + from this file in your programs. +*/ + +#ifndef _WIN32_WCE +# error This version of tif_config.h header is dedicated for Windows CE platform! +#endif + + +#ifndef _TIFFCONF_ +#define _TIFFCONF_ + +/* Define to 1 if the system has the type `int16'. */ +/* #undef HAVE_INT16 */ + +/* Define to 1 if the system has the type `int32'. */ +/* #undef HAVE_INT32 */ + +/* Define to 1 if the system has the type `int8'. */ +/* #undef HAVE_INT8 */ + +/* The size of a `int', as computed by sizeof. */ +#define SIZEOF_INT 4 + +/* Compatibility stuff. */ + +/* Define as 0 or 1 according to the floating point format suported by the + machine */ +#define HAVE_IEEEFP 1 + +/* Set the native cpu bit order (FILLORDER_LSB2MSB or FILLORDER_MSB2LSB) */ +#define HOST_FILLORDER FILLORDER_LSB2MSB + +/* Native cpu byte order: 1 if big-endian (Motorola) or 0 if little-endian + (Intel) */ +#define HOST_BIGENDIAN 0 + +/* Support CCITT Group 3 & 4 algorithms */ +#define CCITT_SUPPORT 1 + +/* Support JPEG compression (requires IJG JPEG library) */ +/* #undef JPEG_SUPPORT */ + +/* Support LogLuv high dynamic range encoding */ +#define LOGLUV_SUPPORT 1 + +/* Support LZW algorithm */ +#define LZW_SUPPORT 1 + +/* Support NeXT 2-bit RLE algorithm */ +#define NEXT_SUPPORT 1 + +/* Support Old JPEG compresson (read contrib/ojpeg/README first! Compilation + fails with unpatched IJG JPEG library) */ +/* #undef OJPEG_SUPPORT */ + +/* Support Macintosh PackBits algorithm */ +#define PACKBITS_SUPPORT 1 + +/* Support Pixar log-format algorithm (requires Zlib) */ +/* #undef PIXARLOG_SUPPORT */ + +/* Support ThunderScan 4-bit RLE algorithm */ +#define THUNDER_SUPPORT 1 + +/* Support Deflate compression */ +/* #undef ZIP_SUPPORT */ + +/* Support strip chopping (whether or not to convert single-strip uncompressed + images to mutiple strips of ~8Kb to reduce memory usage) */ +#define STRIPCHOP_DEFAULT TIFF_STRIPCHOP + +/* Enable SubIFD tag (330) support */ +#define SUBIFD_SUPPORT 1 + +/* Treat extra sample as alpha (default enabled). The RGBA interface will + treat a fourth sample with no EXTRASAMPLE_ value as being ASSOCALPHA. Many + packages produce RGBA files but don't mark the alpha properly. */ +#define DEFAULT_EXTRASAMPLE_AS_ALPHA 1 + +/* Pick up YCbCr subsampling info from the JPEG data stream to support files + lacking the tag (default enabled). */ +#define CHECK_JPEG_YCBCR_SUBSAMPLING 1 + +/* + * Feature support definitions. + * XXX: These macros are obsoleted. Don't use them in your apps! + * Macros stays here for backward compatibility and should be always defined. + */ +#define COLORIMETRY_SUPPORT +#define YCBCR_SUPPORT +#define CMYK_SUPPORT +#define ICC_SUPPORT +#define PHOTOSHOP_SUPPORT +#define IPTC_SUPPORT + +#endif /* _TIFFCONF_ */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tiffio.h b/src/SDL2/external/tiff-4.0.3/libtiff/tiffio.h new file mode 100644 index 000000000..038b67013 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tiffio.h @@ -0,0 +1,557 @@ +/* $Id: tiffio.h,v 1.91 2012-07-29 15:45:29 tgl Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _TIFFIO_ +#define _TIFFIO_ + +/* + * TIFF I/O Library Definitions. + */ +#include "tiff.h" +#include "tiffvers.h" + +/* + * TIFF is defined as an incomplete type to hide the + * library's internal data structures from clients. + */ +typedef struct tiff TIFF; + +/* + * The following typedefs define the intrinsic size of + * data types used in the *exported* interfaces. These + * definitions depend on the proper definition of types + * in tiff.h. Note also that the varargs interface used + * to pass tag types and values uses the types defined in + * tiff.h directly. + * + * NB: ttag_t is unsigned int and not unsigned short because + * ANSI C requires that the type before the ellipsis be a + * promoted type (i.e. one of int, unsigned int, pointer, + * or double) and because we defined pseudo-tags that are + * outside the range of legal Aldus-assigned tags. + * NB: tsize_t is int32 and not uint32 because some functions + * return -1. + * NB: toff_t is not off_t for many reasons; TIFFs max out at + * 32-bit file offsets, and BigTIFF maxes out at 64-bit + * offsets being the most important, and to ensure use of + * a consistently unsigned type across architectures. + * Prior to libtiff 4.0, this was an unsigned 32 bit type. + */ +/* + * this is the machine addressing size type, only it's signed, so make it + * int32 on 32bit machines, int64 on 64bit machines + */ +typedef TIFF_SSIZE_T tmsize_t; +typedef uint64 toff_t; /* file offset */ +/* the following are deprecated and should be replaced by their defining + counterparts */ +typedef uint32 ttag_t; /* directory tag */ +typedef uint16 tdir_t; /* directory index */ +typedef uint16 tsample_t; /* sample number */ +typedef uint32 tstrile_t; /* strip or tile number */ +typedef tstrile_t tstrip_t; /* strip number */ +typedef tstrile_t ttile_t; /* tile number */ +typedef tmsize_t tsize_t; /* i/o size in bytes */ +typedef void* tdata_t; /* image data ref */ + +#if !defined(__WIN32__) && (defined(_WIN32) || defined(WIN32)) +#define __WIN32__ +#endif + +/* + * On windows you should define USE_WIN32_FILEIO if you are using tif_win32.c + * or AVOID_WIN32_FILEIO if you are using something else (like tif_unix.c). + * + * By default tif_unix.c is assumed. + */ + +#if defined(_WINDOWS) || defined(__WIN32__) || defined(_Windows) +# if !defined(__CYGWIN) && !defined(AVOID_WIN32_FILEIO) && !defined(USE_WIN32_FILEIO) +# define AVOID_WIN32_FILEIO +# endif +#endif + +#if defined(USE_WIN32_FILEIO) +# define VC_EXTRALEAN +# include +# ifdef __WIN32__ +DECLARE_HANDLE(thandle_t); /* Win32 file handle */ +# else +typedef HFILE thandle_t; /* client data handle */ +# endif /* __WIN32__ */ +#else +typedef void* thandle_t; /* client data handle */ +#endif /* USE_WIN32_FILEIO */ + +/* + * Flags to pass to TIFFPrintDirectory to control + * printing of data structures that are potentially + * very large. Bit-or these flags to enable printing + * multiple items. + */ +#define TIFFPRINT_NONE 0x0 /* no extra info */ +#define TIFFPRINT_STRIPS 0x1 /* strips/tiles info */ +#define TIFFPRINT_CURVES 0x2 /* color/gray response curves */ +#define TIFFPRINT_COLORMAP 0x4 /* colormap */ +#define TIFFPRINT_JPEGQTABLES 0x100 /* JPEG Q matrices */ +#define TIFFPRINT_JPEGACTABLES 0x200 /* JPEG AC tables */ +#define TIFFPRINT_JPEGDCTABLES 0x200 /* JPEG DC tables */ + +/* + * Colour conversion stuff + */ + +/* reference white */ +#define D65_X0 (95.0470F) +#define D65_Y0 (100.0F) +#define D65_Z0 (108.8827F) + +#define D50_X0 (96.4250F) +#define D50_Y0 (100.0F) +#define D50_Z0 (82.4680F) + +/* Structure for holding information about a display device. */ + +typedef unsigned char TIFFRGBValue; /* 8-bit samples */ + +typedef struct { + float d_mat[3][3]; /* XYZ -> luminance matrix */ + float d_YCR; /* Light o/p for reference white */ + float d_YCG; + float d_YCB; + uint32 d_Vrwr; /* Pixel values for ref. white */ + uint32 d_Vrwg; + uint32 d_Vrwb; + float d_Y0R; /* Residual light for black pixel */ + float d_Y0G; + float d_Y0B; + float d_gammaR; /* Gamma values for the three guns */ + float d_gammaG; + float d_gammaB; +} TIFFDisplay; + +typedef struct { /* YCbCr->RGB support */ + TIFFRGBValue* clamptab; /* range clamping table */ + int* Cr_r_tab; + int* Cb_b_tab; + int32* Cr_g_tab; + int32* Cb_g_tab; + int32* Y_tab; +} TIFFYCbCrToRGB; + +typedef struct { /* CIE Lab 1976->RGB support */ + int range; /* Size of conversion table */ +#define CIELABTORGB_TABLE_RANGE 1500 + float rstep, gstep, bstep; + float X0, Y0, Z0; /* Reference white point */ + TIFFDisplay display; + float Yr2r[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yr to r */ + float Yg2g[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yg to g */ + float Yb2b[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yb to b */ +} TIFFCIELabToRGB; + +/* + * RGBA-style image support. + */ +typedef struct _TIFFRGBAImage TIFFRGBAImage; +/* + * The image reading and conversion routines invoke + * ``put routines'' to copy/image/whatever tiles of + * raw image data. A default set of routines are + * provided to convert/copy raw image data to 8-bit + * packed ABGR format rasters. Applications can supply + * alternate routines that unpack the data into a + * different format or, for example, unpack the data + * and draw the unpacked raster on the display. + */ +typedef void (*tileContigRoutine) + (TIFFRGBAImage*, uint32*, uint32, uint32, uint32, uint32, int32, int32, + unsigned char*); +typedef void (*tileSeparateRoutine) + (TIFFRGBAImage*, uint32*, uint32, uint32, uint32, uint32, int32, int32, + unsigned char*, unsigned char*, unsigned char*, unsigned char*); +/* + * RGBA-reader state. + */ +struct _TIFFRGBAImage { + TIFF* tif; /* image handle */ + int stoponerr; /* stop on read error */ + int isContig; /* data is packed/separate */ + int alpha; /* type of alpha data present */ + uint32 width; /* image width */ + uint32 height; /* image height */ + uint16 bitspersample; /* image bits/sample */ + uint16 samplesperpixel; /* image samples/pixel */ + uint16 orientation; /* image orientation */ + uint16 req_orientation; /* requested orientation */ + uint16 photometric; /* image photometric interp */ + uint16* redcmap; /* colormap pallete */ + uint16* greencmap; + uint16* bluecmap; + /* get image data routine */ + int (*get)(TIFFRGBAImage*, uint32*, uint32, uint32); + /* put decoded strip/tile */ + union { + void (*any)(TIFFRGBAImage*); + tileContigRoutine contig; + tileSeparateRoutine separate; + } put; + TIFFRGBValue* Map; /* sample mapping array */ + uint32** BWmap; /* black&white map */ + uint32** PALmap; /* palette image map */ + TIFFYCbCrToRGB* ycbcr; /* YCbCr conversion state */ + TIFFCIELabToRGB* cielab; /* CIE L*a*b conversion state */ + + uint8* UaToAa; /* Unassociated alpha to associated alpha convertion LUT */ + uint8* Bitdepth16To8; /* LUT for conversion from 16bit to 8bit values */ + + int row_offset; + int col_offset; +}; + +/* + * Macros for extracting components from the + * packed ABGR form returned by TIFFReadRGBAImage. + */ +#define TIFFGetR(abgr) ((abgr) & 0xff) +#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff) +#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff) +#define TIFFGetA(abgr) (((abgr) >> 24) & 0xff) + +/* + * A CODEC is a software package that implements decoding, + * encoding, or decoding+encoding of a compression algorithm. + * The library provides a collection of builtin codecs. + * More codecs may be registered through calls to the library + * and/or the builtin implementations may be overridden. + */ +typedef int (*TIFFInitMethod)(TIFF*, int); +typedef struct { + char* name; + uint16 scheme; + TIFFInitMethod init; +} TIFFCodec; + +#include +#include + +/* share internal LogLuv conversion routines? */ +#ifndef LOGLUV_PUBLIC +#define LOGLUV_PUBLIC 1 +#endif + +#if !defined(__GNUC__) && !defined(__attribute__) +# define __attribute__(x) /*nothing*/ +#endif + +#if defined(c_plusplus) || defined(__cplusplus) +extern "C" { +#endif +typedef void (*TIFFErrorHandler)(const char*, const char*, va_list); +typedef void (*TIFFErrorHandlerExt)(thandle_t, const char*, const char*, va_list); +typedef tmsize_t (*TIFFReadWriteProc)(thandle_t, void*, tmsize_t); +typedef toff_t (*TIFFSeekProc)(thandle_t, toff_t, int); +typedef int (*TIFFCloseProc)(thandle_t); +typedef toff_t (*TIFFSizeProc)(thandle_t); +typedef int (*TIFFMapFileProc)(thandle_t, void** base, toff_t* size); +typedef void (*TIFFUnmapFileProc)(thandle_t, void* base, toff_t size); +typedef void (*TIFFExtendProc)(TIFF*); + +extern const char* TIFFGetVersion(void); + +extern const TIFFCodec* TIFFFindCODEC(uint16); +extern TIFFCodec* TIFFRegisterCODEC(uint16, const char*, TIFFInitMethod); +extern void TIFFUnRegisterCODEC(TIFFCodec*); +extern int TIFFIsCODECConfigured(uint16); +extern TIFFCodec* TIFFGetConfiguredCODECs(void); + +/* + * Auxiliary functions. + */ + +extern void* _TIFFmalloc(tmsize_t s); +extern void* _TIFFrealloc(void* p, tmsize_t s); +extern void _TIFFmemset(void* p, int v, tmsize_t c); +extern void _TIFFmemcpy(void* d, const void* s, tmsize_t c); +extern int _TIFFmemcmp(const void* p1, const void* p2, tmsize_t c); +extern void _TIFFfree(void* p); + +/* +** Stuff, related to tag handling and creating custom tags. +*/ +extern int TIFFGetTagListCount( TIFF * ); +extern uint32 TIFFGetTagListEntry( TIFF *, int tag_index ); + +#define TIFF_ANY TIFF_NOTYPE /* for field descriptor searching */ +#define TIFF_VARIABLE -1 /* marker for variable length tags */ +#define TIFF_SPP -2 /* marker for SamplesPerPixel tags */ +#define TIFF_VARIABLE2 -3 /* marker for uint32 var-length tags */ + +#define FIELD_CUSTOM 65 + +typedef struct _TIFFField TIFFField; +typedef struct _TIFFFieldArray TIFFFieldArray; + +extern const TIFFField* TIFFFindField(TIFF *, uint32, TIFFDataType); +extern const TIFFField* TIFFFieldWithTag(TIFF*, uint32); +extern const TIFFField* TIFFFieldWithName(TIFF*, const char *); + +extern uint32 TIFFFieldTag(const TIFFField*); +extern const char* TIFFFieldName(const TIFFField*); +extern TIFFDataType TIFFFieldDataType(const TIFFField*); +extern int TIFFFieldPassCount(const TIFFField*); +extern int TIFFFieldReadCount(const TIFFField*); +extern int TIFFFieldWriteCount(const TIFFField*); + +typedef int (*TIFFVSetMethod)(TIFF*, uint32, va_list); +typedef int (*TIFFVGetMethod)(TIFF*, uint32, va_list); +typedef void (*TIFFPrintMethod)(TIFF*, FILE*, long); + +typedef struct { + TIFFVSetMethod vsetfield; /* tag set routine */ + TIFFVGetMethod vgetfield; /* tag get routine */ + TIFFPrintMethod printdir; /* directory print routine */ +} TIFFTagMethods; + +extern TIFFTagMethods *TIFFAccessTagMethods(TIFF *); +extern void *TIFFGetClientInfo(TIFF *, const char *); +extern void TIFFSetClientInfo(TIFF *, void *, const char *); + +extern void TIFFCleanup(TIFF* tif); +extern void TIFFClose(TIFF* tif); +extern int TIFFFlush(TIFF* tif); +extern int TIFFFlushData(TIFF* tif); +extern int TIFFGetField(TIFF* tif, uint32 tag, ...); +extern int TIFFVGetField(TIFF* tif, uint32 tag, va_list ap); +extern int TIFFGetFieldDefaulted(TIFF* tif, uint32 tag, ...); +extern int TIFFVGetFieldDefaulted(TIFF* tif, uint32 tag, va_list ap); +extern int TIFFReadDirectory(TIFF* tif); +extern int TIFFReadCustomDirectory(TIFF* tif, toff_t diroff, const TIFFFieldArray* infoarray); +extern int TIFFReadEXIFDirectory(TIFF* tif, toff_t diroff); +extern uint64 TIFFScanlineSize64(TIFF* tif); +extern tmsize_t TIFFScanlineSize(TIFF* tif); +extern uint64 TIFFRasterScanlineSize64(TIFF* tif); +extern tmsize_t TIFFRasterScanlineSize(TIFF* tif); +extern uint64 TIFFStripSize64(TIFF* tif); +extern tmsize_t TIFFStripSize(TIFF* tif); +extern uint64 TIFFRawStripSize64(TIFF* tif, uint32 strip); +extern tmsize_t TIFFRawStripSize(TIFF* tif, uint32 strip); +extern uint64 TIFFVStripSize64(TIFF* tif, uint32 nrows); +extern tmsize_t TIFFVStripSize(TIFF* tif, uint32 nrows); +extern uint64 TIFFTileRowSize64(TIFF* tif); +extern tmsize_t TIFFTileRowSize(TIFF* tif); +extern uint64 TIFFTileSize64(TIFF* tif); +extern tmsize_t TIFFTileSize(TIFF* tif); +extern uint64 TIFFVTileSize64(TIFF* tif, uint32 nrows); +extern tmsize_t TIFFVTileSize(TIFF* tif, uint32 nrows); +extern uint32 TIFFDefaultStripSize(TIFF* tif, uint32 request); +extern void TIFFDefaultTileSize(TIFF*, uint32*, uint32*); +extern int TIFFFileno(TIFF*); +extern int TIFFSetFileno(TIFF*, int); +extern thandle_t TIFFClientdata(TIFF*); +extern thandle_t TIFFSetClientdata(TIFF*, thandle_t); +extern int TIFFGetMode(TIFF*); +extern int TIFFSetMode(TIFF*, int); +extern int TIFFIsTiled(TIFF*); +extern int TIFFIsByteSwapped(TIFF*); +extern int TIFFIsUpSampled(TIFF*); +extern int TIFFIsMSB2LSB(TIFF*); +extern int TIFFIsBigEndian(TIFF*); +extern TIFFReadWriteProc TIFFGetReadProc(TIFF*); +extern TIFFReadWriteProc TIFFGetWriteProc(TIFF*); +extern TIFFSeekProc TIFFGetSeekProc(TIFF*); +extern TIFFCloseProc TIFFGetCloseProc(TIFF*); +extern TIFFSizeProc TIFFGetSizeProc(TIFF*); +extern TIFFMapFileProc TIFFGetMapFileProc(TIFF*); +extern TIFFUnmapFileProc TIFFGetUnmapFileProc(TIFF*); +extern uint32 TIFFCurrentRow(TIFF*); +extern uint16 TIFFCurrentDirectory(TIFF*); +extern uint16 TIFFNumberOfDirectories(TIFF*); +extern uint64 TIFFCurrentDirOffset(TIFF*); +extern uint32 TIFFCurrentStrip(TIFF*); +extern uint32 TIFFCurrentTile(TIFF* tif); +extern int TIFFReadBufferSetup(TIFF* tif, void* bp, tmsize_t size); +extern int TIFFWriteBufferSetup(TIFF* tif, void* bp, tmsize_t size); +extern int TIFFSetupStrips(TIFF *); +extern int TIFFWriteCheck(TIFF*, int, const char *); +extern void TIFFFreeDirectory(TIFF*); +extern int TIFFCreateDirectory(TIFF*); +extern int TIFFCreateCustomDirectory(TIFF*,const TIFFFieldArray*); +extern int TIFFCreateEXIFDirectory(TIFF*); +extern int TIFFLastDirectory(TIFF*); +extern int TIFFSetDirectory(TIFF*, uint16); +extern int TIFFSetSubDirectory(TIFF*, uint64); +extern int TIFFUnlinkDirectory(TIFF*, uint16); +extern int TIFFSetField(TIFF*, uint32, ...); +extern int TIFFVSetField(TIFF*, uint32, va_list); +extern int TIFFUnsetField(TIFF*, uint32); +extern int TIFFWriteDirectory(TIFF *); +extern int TIFFWriteCustomDirectory(TIFF *, uint64 *); +extern int TIFFCheckpointDirectory(TIFF *); +extern int TIFFRewriteDirectory(TIFF *); + +#if defined(c_plusplus) || defined(__cplusplus) +extern void TIFFPrintDirectory(TIFF*, FILE*, long = 0); +extern int TIFFReadScanline(TIFF* tif, void* buf, uint32 row, uint16 sample = 0); +extern int TIFFWriteScanline(TIFF* tif, void* buf, uint32 row, uint16 sample = 0); +extern int TIFFReadRGBAImage(TIFF*, uint32, uint32, uint32*, int = 0); +extern int TIFFReadRGBAImageOriented(TIFF*, uint32, uint32, uint32*, + int = ORIENTATION_BOTLEFT, int = 0); +#else +extern void TIFFPrintDirectory(TIFF*, FILE*, long); +extern int TIFFReadScanline(TIFF* tif, void* buf, uint32 row, uint16 sample); +extern int TIFFWriteScanline(TIFF* tif, void* buf, uint32 row, uint16 sample); +extern int TIFFReadRGBAImage(TIFF*, uint32, uint32, uint32*, int); +extern int TIFFReadRGBAImageOriented(TIFF*, uint32, uint32, uint32*, int, int); +#endif + +extern int TIFFReadRGBAStrip(TIFF*, uint32, uint32 * ); +extern int TIFFReadRGBATile(TIFF*, uint32, uint32, uint32 * ); +extern int TIFFRGBAImageOK(TIFF*, char [1024]); +extern int TIFFRGBAImageBegin(TIFFRGBAImage*, TIFF*, int, char [1024]); +extern int TIFFRGBAImageGet(TIFFRGBAImage*, uint32*, uint32, uint32); +extern void TIFFRGBAImageEnd(TIFFRGBAImage*); +extern TIFF* TIFFOpen(const char*, const char*); +# ifdef __WIN32__ +extern TIFF* TIFFOpenW(const wchar_t*, const char*); +# endif /* __WIN32__ */ +extern TIFF* TIFFFdOpen(int, const char*, const char*); +extern TIFF* TIFFClientOpen(const char*, const char*, + thandle_t, + TIFFReadWriteProc, TIFFReadWriteProc, + TIFFSeekProc, TIFFCloseProc, + TIFFSizeProc, + TIFFMapFileProc, TIFFUnmapFileProc); +extern const char* TIFFFileName(TIFF*); +extern const char* TIFFSetFileName(TIFF*, const char *); +extern void TIFFError(const char*, const char*, ...) __attribute__((__format__ (__printf__,2,3))); +extern void TIFFErrorExt(thandle_t, const char*, const char*, ...) __attribute__((__format__ (__printf__,3,4))); +extern void TIFFWarning(const char*, const char*, ...) __attribute__((__format__ (__printf__,2,3))); +extern void TIFFWarningExt(thandle_t, const char*, const char*, ...) __attribute__((__format__ (__printf__,3,4))); +extern TIFFErrorHandler TIFFSetErrorHandler(TIFFErrorHandler); +extern TIFFErrorHandlerExt TIFFSetErrorHandlerExt(TIFFErrorHandlerExt); +extern TIFFErrorHandler TIFFSetWarningHandler(TIFFErrorHandler); +extern TIFFErrorHandlerExt TIFFSetWarningHandlerExt(TIFFErrorHandlerExt); +extern TIFFExtendProc TIFFSetTagExtender(TIFFExtendProc); +extern uint32 TIFFComputeTile(TIFF* tif, uint32 x, uint32 y, uint32 z, uint16 s); +extern int TIFFCheckTile(TIFF* tif, uint32 x, uint32 y, uint32 z, uint16 s); +extern uint32 TIFFNumberOfTiles(TIFF*); +extern tmsize_t TIFFReadTile(TIFF* tif, void* buf, uint32 x, uint32 y, uint32 z, uint16 s); +extern tmsize_t TIFFWriteTile(TIFF* tif, void* buf, uint32 x, uint32 y, uint32 z, uint16 s); +extern uint32 TIFFComputeStrip(TIFF*, uint32, uint16); +extern uint32 TIFFNumberOfStrips(TIFF*); +extern tmsize_t TIFFReadEncodedStrip(TIFF* tif, uint32 strip, void* buf, tmsize_t size); +extern tmsize_t TIFFReadRawStrip(TIFF* tif, uint32 strip, void* buf, tmsize_t size); +extern tmsize_t TIFFReadEncodedTile(TIFF* tif, uint32 tile, void* buf, tmsize_t size); +extern tmsize_t TIFFReadRawTile(TIFF* tif, uint32 tile, void* buf, tmsize_t size); +extern tmsize_t TIFFWriteEncodedStrip(TIFF* tif, uint32 strip, void* data, tmsize_t cc); +extern tmsize_t TIFFWriteRawStrip(TIFF* tif, uint32 strip, void* data, tmsize_t cc); +extern tmsize_t TIFFWriteEncodedTile(TIFF* tif, uint32 tile, void* data, tmsize_t cc); +extern tmsize_t TIFFWriteRawTile(TIFF* tif, uint32 tile, void* data, tmsize_t cc); +extern int TIFFDataWidth(TIFFDataType); /* table of tag datatype widths */ +extern void TIFFSetWriteOffset(TIFF* tif, toff_t off); +extern void TIFFSwabShort(uint16*); +extern void TIFFSwabLong(uint32*); +extern void TIFFSwabLong8(uint64*); +extern void TIFFSwabFloat(float*); +extern void TIFFSwabDouble(double*); +extern void TIFFSwabArrayOfShort(uint16* wp, tmsize_t n); +extern void TIFFSwabArrayOfTriples(uint8* tp, tmsize_t n); +extern void TIFFSwabArrayOfLong(uint32* lp, tmsize_t n); +extern void TIFFSwabArrayOfLong8(uint64* lp, tmsize_t n); +extern void TIFFSwabArrayOfFloat(float* fp, tmsize_t n); +extern void TIFFSwabArrayOfDouble(double* dp, tmsize_t n); +extern void TIFFReverseBits(uint8* cp, tmsize_t n); +extern const unsigned char* TIFFGetBitRevTable(int); + +#ifdef LOGLUV_PUBLIC +#define U_NEU 0.210526316 +#define V_NEU 0.473684211 +#define UVSCALE 410. +extern double LogL16toY(int); +extern double LogL10toY(int); +extern void XYZtoRGB24(float*, uint8*); +extern int uv_decode(double*, double*, int); +extern void LogLuv24toXYZ(uint32, float*); +extern void LogLuv32toXYZ(uint32, float*); +#if defined(c_plusplus) || defined(__cplusplus) +extern int LogL16fromY(double, int = SGILOGENCODE_NODITHER); +extern int LogL10fromY(double, int = SGILOGENCODE_NODITHER); +extern int uv_encode(double, double, int = SGILOGENCODE_NODITHER); +extern uint32 LogLuv24fromXYZ(float*, int = SGILOGENCODE_NODITHER); +extern uint32 LogLuv32fromXYZ(float*, int = SGILOGENCODE_NODITHER); +#else +extern int LogL16fromY(double, int); +extern int LogL10fromY(double, int); +extern int uv_encode(double, double, int); +extern uint32 LogLuv24fromXYZ(float*, int); +extern uint32 LogLuv32fromXYZ(float*, int); +#endif +#endif /* LOGLUV_PUBLIC */ + +extern int TIFFCIELabToRGBInit(TIFFCIELabToRGB*, const TIFFDisplay *, float*); +extern void TIFFCIELabToXYZ(TIFFCIELabToRGB *, uint32, int32, int32, + float *, float *, float *); +extern void TIFFXYZToRGB(TIFFCIELabToRGB *, float, float, float, + uint32 *, uint32 *, uint32 *); + +extern int TIFFYCbCrToRGBInit(TIFFYCbCrToRGB*, float*, float*); +extern void TIFFYCbCrtoRGB(TIFFYCbCrToRGB *, uint32, int32, int32, + uint32 *, uint32 *, uint32 *); + +/**************************************************************************** + * O B S O L E T E D I N T E R F A C E S + * + * Don't use this stuff in your applications, it may be removed in the future + * libtiff versions. + ****************************************************************************/ +typedef struct { + ttag_t field_tag; /* field's tag */ + short field_readcount; /* read count/TIFF_VARIABLE/TIFF_SPP */ + short field_writecount; /* write count/TIFF_VARIABLE */ + TIFFDataType field_type; /* type of associated data */ + unsigned short field_bit; /* bit in fieldsset bit vector */ + unsigned char field_oktochange; /* if true, can change while writing */ + unsigned char field_passcount; /* if true, pass dir count on set */ + char *field_name; /* ASCII name */ +} TIFFFieldInfo; + +extern int TIFFMergeFieldInfo(TIFF*, const TIFFFieldInfo[], uint32); + +#if defined(c_plusplus) || defined(__cplusplus) +} +#endif + +#endif /* _TIFFIO_ */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tiffio.hxx b/src/SDL2/external/tiff-4.0.3/libtiff/tiffio.hxx new file mode 100644 index 000000000..ed994f115 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tiffio.hxx @@ -0,0 +1,49 @@ +/* $Id: tiffio.hxx,v 1.3 2010-06-08 18:55:15 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _TIFFIO_HXX_ +#define _TIFFIO_HXX_ + +/* + * TIFF I/O library definitions which provide C++ streams API. + */ + +#include +#include "tiff.h" + +extern TIFF* TIFFStreamOpen(const char*, std::ostream *); +extern TIFF* TIFFStreamOpen(const char*, std::istream *); + +#endif /* _TIFFIO_HXX_ */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c++ + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tiffiop.h b/src/SDL2/external/tiff-4.0.3/libtiff/tiffiop.h new file mode 100644 index 000000000..53357d852 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tiffiop.h @@ -0,0 +1,367 @@ +/* $Id: tiffiop.h,v 1.84 2012-05-30 01:50:17 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _TIFFIOP_ +#define _TIFFIOP_ +/* + * ``Library-private'' definitions. + */ + +#include "tif_config.h" + +#ifdef HAVE_FCNTL_H +# include +#endif + +#ifdef HAVE_SYS_TYPES_H +# include +#endif + +#ifdef HAVE_STRING_H +# include +#endif + +#ifdef HAVE_ASSERT_H +# include +#else +# define assert(x) +#endif + +#ifdef HAVE_SEARCH_H +# include +#else +extern void *lfind(const void *, const void *, size_t *, size_t, + int (*)(const void *, const void *)); +#endif + +#include "tiffio.h" + +#include "tif_dir.h" + +#ifndef STRIP_SIZE_DEFAULT +# define STRIP_SIZE_DEFAULT 8192 +#endif + +#define streq(a,b) (strcmp(a,b) == 0) + +#ifndef TRUE +#define TRUE 1 +#define FALSE 0 +#endif + +typedef struct client_info { + struct client_info *next; + void *data; + char *name; +} TIFFClientInfoLink; + +/* + * Typedefs for ``method pointers'' used internally. + * these are depriciated and provided only for backwards compatibility + */ +typedef unsigned char tidataval_t; /* internal image data value type */ +typedef tidataval_t* tidata_t; /* reference to internal image data */ + +typedef void (*TIFFVoidMethod)(TIFF*); +typedef int (*TIFFBoolMethod)(TIFF*); +typedef int (*TIFFPreMethod)(TIFF*, uint16); +typedef int (*TIFFCodeMethod)(TIFF* tif, uint8* buf, tmsize_t size, uint16 sample); +typedef int (*TIFFSeekMethod)(TIFF*, uint32); +typedef void (*TIFFPostMethod)(TIFF* tif, uint8* buf, tmsize_t size); +typedef uint32 (*TIFFStripMethod)(TIFF*, uint32); +typedef void (*TIFFTileMethod)(TIFF*, uint32*, uint32*); + +struct tiff { + char* tif_name; /* name of open file */ + int tif_fd; /* open file descriptor */ + int tif_mode; /* open mode (O_*) */ + uint32 tif_flags; + #define TIFF_FILLORDER 0x00003 /* natural bit fill order for machine */ + #define TIFF_DIRTYHEADER 0x00004 /* header must be written on close */ + #define TIFF_DIRTYDIRECT 0x00008 /* current directory must be written */ + #define TIFF_BUFFERSETUP 0x00010 /* data buffers setup */ + #define TIFF_CODERSETUP 0x00020 /* encoder/decoder setup done */ + #define TIFF_BEENWRITING 0x00040 /* written 1+ scanlines to file */ + #define TIFF_SWAB 0x00080 /* byte swap file information */ + #define TIFF_NOBITREV 0x00100 /* inhibit bit reversal logic */ + #define TIFF_MYBUFFER 0x00200 /* my raw data buffer; free on close */ + #define TIFF_ISTILED 0x00400 /* file is tile, not strip- based */ + #define TIFF_MAPPED 0x00800 /* file is mapped into memory */ + #define TIFF_POSTENCODE 0x01000 /* need call to postencode routine */ + #define TIFF_INSUBIFD 0x02000 /* currently writing a subifd */ + #define TIFF_UPSAMPLED 0x04000 /* library is doing data up-sampling */ + #define TIFF_STRIPCHOP 0x08000 /* enable strip chopping support */ + #define TIFF_HEADERONLY 0x10000 /* read header only, do not process the first directory */ + #define TIFF_NOREADRAW 0x20000 /* skip reading of raw uncompressed image data */ + #define TIFF_INCUSTOMIFD 0x40000 /* currently writing a custom IFD */ + #define TIFF_BIGTIFF 0x80000 /* read/write bigtiff */ + #define TIFF_BUF4WRITE 0x100000 /* rawcc bytes are for writing */ + #define TIFF_DIRTYSTRIP 0x200000 /* stripoffsets/stripbytecount dirty*/ + #define TIFF_PERSAMPLE 0x400000 /* get/set per sample tags as arrays */ + #define TIFF_BUFFERMMAP 0x800000 /* read buffer (tif_rawdata) points into mmap() memory */ + uint64 tif_diroff; /* file offset of current directory */ + uint64 tif_nextdiroff; /* file offset of following directory */ + uint64* tif_dirlist; /* list of offsets to already seen directories to prevent IFD looping */ + uint16 tif_dirlistsize; /* number of entires in offset list */ + uint16 tif_dirnumber; /* number of already seen directories */ + TIFFDirectory tif_dir; /* internal rep of current directory */ + TIFFDirectory tif_customdir; /* custom IFDs are separated from the main ones */ + union { + TIFFHeaderCommon common; + TIFFHeaderClassic classic; + TIFFHeaderBig big; + } tif_header; + uint16 tif_header_size; /* file's header block and its length */ + uint32 tif_row; /* current scanline */ + uint16 tif_curdir; /* current directory (index) */ + uint32 tif_curstrip; /* current strip for read/write */ + uint64 tif_curoff; /* current offset for read/write */ + uint64 tif_dataoff; /* current offset for writing dir */ + /* SubIFD support */ + uint16 tif_nsubifd; /* remaining subifds to write */ + uint64 tif_subifdoff; /* offset for patching SubIFD link */ + /* tiling support */ + uint32 tif_col; /* current column (offset by row too) */ + uint32 tif_curtile; /* current tile for read/write */ + tmsize_t tif_tilesize; /* # of bytes in a tile */ + /* compression scheme hooks */ + int tif_decodestatus; + TIFFBoolMethod tif_fixuptags; /* called in TIFFReadDirectory */ + TIFFBoolMethod tif_setupdecode; /* called once before predecode */ + TIFFPreMethod tif_predecode; /* pre- row/strip/tile decoding */ + TIFFBoolMethod tif_setupencode; /* called once before preencode */ + int tif_encodestatus; + TIFFPreMethod tif_preencode; /* pre- row/strip/tile encoding */ + TIFFBoolMethod tif_postencode; /* post- row/strip/tile encoding */ + TIFFCodeMethod tif_decoderow; /* scanline decoding routine */ + TIFFCodeMethod tif_encoderow; /* scanline encoding routine */ + TIFFCodeMethod tif_decodestrip; /* strip decoding routine */ + TIFFCodeMethod tif_encodestrip; /* strip encoding routine */ + TIFFCodeMethod tif_decodetile; /* tile decoding routine */ + TIFFCodeMethod tif_encodetile; /* tile encoding routine */ + TIFFVoidMethod tif_close; /* cleanup-on-close routine */ + TIFFSeekMethod tif_seek; /* position within a strip routine */ + TIFFVoidMethod tif_cleanup; /* cleanup state routine */ + TIFFStripMethod tif_defstripsize; /* calculate/constrain strip size */ + TIFFTileMethod tif_deftilesize; /* calculate/constrain tile size */ + uint8* tif_data; /* compression scheme private data */ + /* input/output buffering */ + tmsize_t tif_scanlinesize; /* # of bytes in a scanline */ + tmsize_t tif_scanlineskew; /* scanline skew for reading strips */ + uint8* tif_rawdata; /* raw data buffer */ + tmsize_t tif_rawdatasize; /* # of bytes in raw data buffer */ + tmsize_t tif_rawdataoff; /* rawdata offset within strip */ + tmsize_t tif_rawdataloaded;/* amount of data in rawdata */ + uint8* tif_rawcp; /* current spot in raw buffer */ + tmsize_t tif_rawcc; /* bytes unread from raw buffer */ + /* memory-mapped file support */ + uint8* tif_base; /* base of mapped file */ + tmsize_t tif_size; /* size of mapped file region (bytes, thus tmsize_t) */ + TIFFMapFileProc tif_mapproc; /* map file method */ + TIFFUnmapFileProc tif_unmapproc; /* unmap file method */ + /* input/output callback methods */ + thandle_t tif_clientdata; /* callback parameter */ + TIFFReadWriteProc tif_readproc; /* read method */ + TIFFReadWriteProc tif_writeproc; /* write method */ + TIFFSeekProc tif_seekproc; /* lseek method */ + TIFFCloseProc tif_closeproc; /* close method */ + TIFFSizeProc tif_sizeproc; /* filesize method */ + /* post-decoding support */ + TIFFPostMethod tif_postdecode; /* post decoding routine */ + /* tag support */ + TIFFField** tif_fields; /* sorted table of registered tags */ + size_t tif_nfields; /* # entries in registered tag table */ + const TIFFField* tif_foundfield; /* cached pointer to already found tag */ + TIFFTagMethods tif_tagmethods; /* tag get/set/print routines */ + TIFFClientInfoLink* tif_clientinfo; /* extra client information. */ + /* Backward compatibility stuff. We need these two fields for + * setting up an old tag extension scheme. */ + TIFFFieldArray* tif_fieldscompat; + size_t tif_nfieldscompat; +}; + +#define isPseudoTag(t) (t > 0xffff) /* is tag value normal or pseudo */ + +#define isTiled(tif) (((tif)->tif_flags & TIFF_ISTILED) != 0) +#define isMapped(tif) (((tif)->tif_flags & TIFF_MAPPED) != 0) +#define isFillOrder(tif, o) (((tif)->tif_flags & (o)) != 0) +#define isUpSampled(tif) (((tif)->tif_flags & TIFF_UPSAMPLED) != 0) +#define TIFFReadFile(tif, buf, size) \ + ((*(tif)->tif_readproc)((tif)->tif_clientdata,(buf),(size))) +#define TIFFWriteFile(tif, buf, size) \ + ((*(tif)->tif_writeproc)((tif)->tif_clientdata,(buf),(size))) +#define TIFFSeekFile(tif, off, whence) \ + ((*(tif)->tif_seekproc)((tif)->tif_clientdata,(off),(whence))) +#define TIFFCloseFile(tif) \ + ((*(tif)->tif_closeproc)((tif)->tif_clientdata)) +#define TIFFGetFileSize(tif) \ + ((*(tif)->tif_sizeproc)((tif)->tif_clientdata)) +#define TIFFMapFileContents(tif, paddr, psize) \ + ((*(tif)->tif_mapproc)((tif)->tif_clientdata,(paddr),(psize))) +#define TIFFUnmapFileContents(tif, addr, size) \ + ((*(tif)->tif_unmapproc)((tif)->tif_clientdata,(addr),(size))) + +/* + * Default Read/Seek/Write definitions. + */ +#ifndef ReadOK +#define ReadOK(tif, buf, size) \ + (TIFFReadFile((tif),(buf),(size))==(size)) +#endif +#ifndef SeekOK +#define SeekOK(tif, off) \ + (TIFFSeekFile((tif),(off),SEEK_SET)==(off)) +#endif +#ifndef WriteOK +#define WriteOK(tif, buf, size) \ + (TIFFWriteFile((tif),(buf),(size))==(size)) +#endif + +/* NB: the uint32 casts are to silence certain ANSI-C compilers */ +#define TIFFhowmany_32(x, y) (((uint32)x < (0xffffffff - (uint32)(y-1))) ? \ + ((((uint32)(x))+(((uint32)(y))-1))/((uint32)(y))) : \ + 0U) +#define TIFFhowmany8_32(x) (((x)&0x07)?((uint32)(x)>>3)+1:(uint32)(x)>>3) +#define TIFFroundup_32(x, y) (TIFFhowmany_32(x,y)*(y)) +#define TIFFhowmany_64(x, y) ((((uint64)(x))+(((uint64)(y))-1))/((uint64)(y))) +#define TIFFhowmany8_64(x) (((x)&0x07)?((uint64)(x)>>3)+1:(uint64)(x)>>3) +#define TIFFroundup_64(x, y) (TIFFhowmany_64(x,y)*(y)) + +/* Safe multiply which returns zero if there is an integer overflow */ +#define TIFFSafeMultiply(t,v,m) ((((t)(m) != (t)0) && (((t)(((v)*(m))/(m))) == (t)(v))) ? (t)((v)*(m)) : (t)0) + +#define TIFFmax(A,B) ((A)>(B)?(A):(B)) +#define TIFFmin(A,B) ((A)<(B)?(A):(B)) + +#define TIFFArrayCount(a) (sizeof (a) / sizeof ((a)[0])) + +#if defined(__cplusplus) +extern "C" { +#endif +extern int _TIFFgetMode(const char* mode, const char* module); +extern int _TIFFNoRowEncode(TIFF* tif, uint8* pp, tmsize_t cc, uint16 s); +extern int _TIFFNoStripEncode(TIFF* tif, uint8* pp, tmsize_t cc, uint16 s); +extern int _TIFFNoTileEncode(TIFF*, uint8* pp, tmsize_t cc, uint16 s); +extern int _TIFFNoRowDecode(TIFF* tif, uint8* pp, tmsize_t cc, uint16 s); +extern int _TIFFNoStripDecode(TIFF* tif, uint8* pp, tmsize_t cc, uint16 s); +extern int _TIFFNoTileDecode(TIFF*, uint8* pp, tmsize_t cc, uint16 s); +extern void _TIFFNoPostDecode(TIFF* tif, uint8* buf, tmsize_t cc); +extern int _TIFFNoPreCode(TIFF* tif, uint16 s); +extern int _TIFFNoSeek(TIFF* tif, uint32 off); +extern void _TIFFSwab16BitData(TIFF* tif, uint8* buf, tmsize_t cc); +extern void _TIFFSwab24BitData(TIFF* tif, uint8* buf, tmsize_t cc); +extern void _TIFFSwab32BitData(TIFF* tif, uint8* buf, tmsize_t cc); +extern void _TIFFSwab64BitData(TIFF* tif, uint8* buf, tmsize_t cc); +extern int TIFFFlushData1(TIFF* tif); +extern int TIFFDefaultDirectory(TIFF* tif); +extern void _TIFFSetDefaultCompressionState(TIFF* tif); +extern int _TIFFRewriteField(TIFF *, uint16, TIFFDataType, tmsize_t, void *); +extern int TIFFSetCompressionScheme(TIFF* tif, int scheme); +extern int TIFFSetDefaultCompressionState(TIFF* tif); +extern uint32 _TIFFDefaultStripSize(TIFF* tif, uint32 s); +extern void _TIFFDefaultTileSize(TIFF* tif, uint32* tw, uint32* th); +extern int _TIFFDataSize(TIFFDataType type); + +extern void _TIFFsetByteArray(void**, void*, uint32); +extern void _TIFFsetString(char**, char*); +extern void _TIFFsetShortArray(uint16**, uint16*, uint32); +extern void _TIFFsetLongArray(uint32**, uint32*, uint32); +extern void _TIFFsetFloatArray(float**, float*, uint32); +extern void _TIFFsetDoubleArray(double**, double*, uint32); + +extern void _TIFFprintAscii(FILE*, const char*); +extern void _TIFFprintAsciiTag(FILE*, const char*, const char*); + +extern TIFFErrorHandler _TIFFwarningHandler; +extern TIFFErrorHandler _TIFFerrorHandler; +extern TIFFErrorHandlerExt _TIFFwarningHandlerExt; +extern TIFFErrorHandlerExt _TIFFerrorHandlerExt; + +extern uint32 _TIFFMultiply32(TIFF*, uint32, uint32, const char*); +extern uint64 _TIFFMultiply64(TIFF*, uint64, uint64, const char*); +extern void* _TIFFCheckMalloc(TIFF*, tmsize_t, tmsize_t, const char*); +extern void* _TIFFCheckRealloc(TIFF*, void*, tmsize_t, tmsize_t, const char*); + +extern double _TIFFUInt64ToDouble(uint64); +extern float _TIFFUInt64ToFloat(uint64); + +extern int TIFFInitDumpMode(TIFF*, int); +#ifdef PACKBITS_SUPPORT +extern int TIFFInitPackBits(TIFF*, int); +#endif +#ifdef CCITT_SUPPORT +extern int TIFFInitCCITTRLE(TIFF*, int), TIFFInitCCITTRLEW(TIFF*, int); +extern int TIFFInitCCITTFax3(TIFF*, int), TIFFInitCCITTFax4(TIFF*, int); +#endif +#ifdef THUNDER_SUPPORT +extern int TIFFInitThunderScan(TIFF*, int); +#endif +#ifdef NEXT_SUPPORT +extern int TIFFInitNeXT(TIFF*, int); +#endif +#ifdef LZW_SUPPORT +extern int TIFFInitLZW(TIFF*, int); +#endif +#ifdef OJPEG_SUPPORT +extern int TIFFInitOJPEG(TIFF*, int); +#endif +#ifdef JPEG_SUPPORT +extern int TIFFInitJPEG(TIFF*, int); +#endif +#ifdef JBIG_SUPPORT +extern int TIFFInitJBIG(TIFF*, int); +#endif +#ifdef ZIP_SUPPORT +extern int TIFFInitZIP(TIFF*, int); +#endif +#ifdef PIXARLOG_SUPPORT +extern int TIFFInitPixarLog(TIFF*, int); +#endif +#ifdef LOGLUV_SUPPORT +extern int TIFFInitSGILog(TIFF*, int); +#endif +#ifdef LZMA_SUPPORT +extern int TIFFInitLZMA(TIFF*, int); +#endif +#ifdef VMS +extern const TIFFCodec _TIFFBuiltinCODECS[]; +#else +extern TIFFCodec _TIFFBuiltinCODECS[]; +#endif + +#if defined(__cplusplus) +} +#endif +#endif /* _TIFFIOP_ */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/tiffvers.h b/src/SDL2/external/tiff-4.0.3/libtiff/tiffvers.h new file mode 100644 index 000000000..40edc813d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/tiffvers.h @@ -0,0 +1,9 @@ +#define TIFFLIB_VERSION_STR "LIBTIFF, Version 4.0.3\nCopyright (c) 1988-1996 Sam Leffler\nCopyright (c) 1991-1996 Silicon Graphics, Inc." +/* + * This define can be used in code that requires + * compilation-related definitions specific to a + * version or versions of the library. Runtime + * version checking should be done based on the + * string returned by TIFFGetVersion. + */ +#define TIFFLIB_VERSION 20120922 diff --git a/src/SDL2/external/tiff-4.0.3/libtiff/uvcode.h b/src/SDL2/external/tiff-4.0.3/libtiff/uvcode.h new file mode 100644 index 000000000..50f11d7e0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/libtiff/uvcode.h @@ -0,0 +1,180 @@ +/* Version 1.0 generated April 7, 1997 by Greg Ward Larson, SGI */ +#define UV_SQSIZ (float)0.003500 +#define UV_NDIVS 16289 +#define UV_VSTART (float)0.016940 +#define UV_NVS 163 +static struct { + float ustart; + short nus, ncum; +} uv_row[UV_NVS] = { + { (float)0.247663, 4, 0 }, + { (float)0.243779, 6, 4 }, + { (float)0.241684, 7, 10 }, + { (float)0.237874, 9, 17 }, + { (float)0.235906, 10, 26 }, + { (float)0.232153, 12, 36 }, + { (float)0.228352, 14, 48 }, + { (float)0.226259, 15, 62 }, + { (float)0.222371, 17, 77 }, + { (float)0.220410, 18, 94 }, + { (float)0.214710, 21, 112 }, + { (float)0.212714, 22, 133 }, + { (float)0.210721, 23, 155 }, + { (float)0.204976, 26, 178 }, + { (float)0.202986, 27, 204 }, + { (float)0.199245, 29, 231 }, + { (float)0.195525, 31, 260 }, + { (float)0.193560, 32, 291 }, + { (float)0.189878, 34, 323 }, + { (float)0.186216, 36, 357 }, + { (float)0.186216, 36, 393 }, + { (float)0.182592, 38, 429 }, + { (float)0.179003, 40, 467 }, + { (float)0.175466, 42, 507 }, + { (float)0.172001, 44, 549 }, + { (float)0.172001, 44, 593 }, + { (float)0.168612, 46, 637 }, + { (float)0.168612, 46, 683 }, + { (float)0.163575, 49, 729 }, + { (float)0.158642, 52, 778 }, + { (float)0.158642, 52, 830 }, + { (float)0.158642, 52, 882 }, + { (float)0.153815, 55, 934 }, + { (float)0.153815, 55, 989 }, + { (float)0.149097, 58, 1044 }, + { (float)0.149097, 58, 1102 }, + { (float)0.142746, 62, 1160 }, + { (float)0.142746, 62, 1222 }, + { (float)0.142746, 62, 1284 }, + { (float)0.138270, 65, 1346 }, + { (float)0.138270, 65, 1411 }, + { (float)0.138270, 65, 1476 }, + { (float)0.132166, 69, 1541 }, + { (float)0.132166, 69, 1610 }, + { (float)0.126204, 73, 1679 }, + { (float)0.126204, 73, 1752 }, + { (float)0.126204, 73, 1825 }, + { (float)0.120381, 77, 1898 }, + { (float)0.120381, 77, 1975 }, + { (float)0.120381, 77, 2052 }, + { (float)0.120381, 77, 2129 }, + { (float)0.112962, 82, 2206 }, + { (float)0.112962, 82, 2288 }, + { (float)0.112962, 82, 2370 }, + { (float)0.107450, 86, 2452 }, + { (float)0.107450, 86, 2538 }, + { (float)0.107450, 86, 2624 }, + { (float)0.107450, 86, 2710 }, + { (float)0.100343, 91, 2796 }, + { (float)0.100343, 91, 2887 }, + { (float)0.100343, 91, 2978 }, + { (float)0.095126, 95, 3069 }, + { (float)0.095126, 95, 3164 }, + { (float)0.095126, 95, 3259 }, + { (float)0.095126, 95, 3354 }, + { (float)0.088276, 100, 3449 }, + { (float)0.088276, 100, 3549 }, + { (float)0.088276, 100, 3649 }, + { (float)0.088276, 100, 3749 }, + { (float)0.081523, 105, 3849 }, + { (float)0.081523, 105, 3954 }, + { (float)0.081523, 105, 4059 }, + { (float)0.081523, 105, 4164 }, + { (float)0.074861, 110, 4269 }, + { (float)0.074861, 110, 4379 }, + { (float)0.074861, 110, 4489 }, + { (float)0.074861, 110, 4599 }, + { (float)0.068290, 115, 4709 }, + { (float)0.068290, 115, 4824 }, + { (float)0.068290, 115, 4939 }, + { (float)0.068290, 115, 5054 }, + { (float)0.063573, 119, 5169 }, + { (float)0.063573, 119, 5288 }, + { (float)0.063573, 119, 5407 }, + { (float)0.063573, 119, 5526 }, + { (float)0.057219, 124, 5645 }, + { (float)0.057219, 124, 5769 }, + { (float)0.057219, 124, 5893 }, + { (float)0.057219, 124, 6017 }, + { (float)0.050985, 129, 6141 }, + { (float)0.050985, 129, 6270 }, + { (float)0.050985, 129, 6399 }, + { (float)0.050985, 129, 6528 }, + { (float)0.050985, 129, 6657 }, + { (float)0.044859, 134, 6786 }, + { (float)0.044859, 134, 6920 }, + { (float)0.044859, 134, 7054 }, + { (float)0.044859, 134, 7188 }, + { (float)0.040571, 138, 7322 }, + { (float)0.040571, 138, 7460 }, + { (float)0.040571, 138, 7598 }, + { (float)0.040571, 138, 7736 }, + { (float)0.036339, 142, 7874 }, + { (float)0.036339, 142, 8016 }, + { (float)0.036339, 142, 8158 }, + { (float)0.036339, 142, 8300 }, + { (float)0.032139, 146, 8442 }, + { (float)0.032139, 146, 8588 }, + { (float)0.032139, 146, 8734 }, + { (float)0.032139, 146, 8880 }, + { (float)0.027947, 150, 9026 }, + { (float)0.027947, 150, 9176 }, + { (float)0.027947, 150, 9326 }, + { (float)0.023739, 154, 9476 }, + { (float)0.023739, 154, 9630 }, + { (float)0.023739, 154, 9784 }, + { (float)0.023739, 154, 9938 }, + { (float)0.019504, 158, 10092 }, + { (float)0.019504, 158, 10250 }, + { (float)0.019504, 158, 10408 }, + { (float)0.016976, 161, 10566 }, + { (float)0.016976, 161, 10727 }, + { (float)0.016976, 161, 10888 }, + { (float)0.016976, 161, 11049 }, + { (float)0.012639, 165, 11210 }, + { (float)0.012639, 165, 11375 }, + { (float)0.012639, 165, 11540 }, + { (float)0.009991, 168, 11705 }, + { (float)0.009991, 168, 11873 }, + { (float)0.009991, 168, 12041 }, + { (float)0.009016, 170, 12209 }, + { (float)0.009016, 170, 12379 }, + { (float)0.009016, 170, 12549 }, + { (float)0.006217, 173, 12719 }, + { (float)0.006217, 173, 12892 }, + { (float)0.005097, 175, 13065 }, + { (float)0.005097, 175, 13240 }, + { (float)0.005097, 175, 13415 }, + { (float)0.003909, 177, 13590 }, + { (float)0.003909, 177, 13767 }, + { (float)0.002340, 177, 13944 }, + { (float)0.002389, 170, 14121 }, + { (float)0.001068, 164, 14291 }, + { (float)0.001653, 157, 14455 }, + { (float)0.000717, 150, 14612 }, + { (float)0.001614, 143, 14762 }, + { (float)0.000270, 136, 14905 }, + { (float)0.000484, 129, 15041 }, + { (float)0.001103, 123, 15170 }, + { (float)0.001242, 115, 15293 }, + { (float)0.001188, 109, 15408 }, + { (float)0.001011, 103, 15517 }, + { (float)0.000709, 97, 15620 }, + { (float)0.000301, 89, 15717 }, + { (float)0.002416, 82, 15806 }, + { (float)0.003251, 76, 15888 }, + { (float)0.003246, 69, 15964 }, + { (float)0.004141, 62, 16033 }, + { (float)0.005963, 55, 16095 }, + { (float)0.008839, 47, 16150 }, + { (float)0.010490, 40, 16197 }, + { (float)0.016994, 31, 16237 }, + { (float)0.023659, 21, 16268 }, +}; +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/m4/acinclude.m4 b/src/SDL2/external/tiff-4.0.3/m4/acinclude.m4 new file mode 100644 index 000000000..b54feb706 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/m4/acinclude.m4 @@ -0,0 +1,851 @@ +dnl --------------------------------------------------------------------------- +dnl Message output +dnl --------------------------------------------------------------------------- +AC_DEFUN([LOC_MSG],[echo "$1"]) + +dnl --------------------------------------------------------------------------- +dnl Available from the GNU Autoconf Macro Archive at: +dnl http://www.gnu.org/software/ac-archive/vl_prog_cc_warnings.html +dnl --------------------------------------------------------------------------- + +dnl @synopsis VL_PROG_CC_WARNINGS([ANSI]) +dnl +dnl Enables a reasonable set of warnings for the C compiler. +dnl Optionally, if the first argument is nonempty, turns on flags which +dnl enforce and/or enable proper ANSI C if such are known with the +dnl compiler used. +dnl +dnl Currently this macro knows about GCC, Solaris C compiler, Digital +dnl Unix C compiler, C for AIX Compiler, HP-UX C compiler, IRIX C +dnl compiler, NEC SX-5 (Super-UX 10) C compiler, and Cray J90 (Unicos +dnl 10.0.0.8) C compiler. +dnl +dnl @category C +dnl @author Ville Laurikari +dnl @version 2002-04-04 +dnl @license AllPermissive + +AC_DEFUN([VL_PROG_CC_WARNINGS], [ + ansi=$1 + if test -z "$ansi"; then + msg="for C compiler warning flags" + else + msg="for C compiler warning and ANSI conformance flags" + fi + AC_CACHE_CHECK($msg, vl_cv_prog_cc_warnings, [ + if test -n "$CC"; then + cat > conftest.c <&1 | grep -i "WorkShop" > /dev/null 2>&1 && + $CC -c -v -Xc conftest.c > /dev/null 2>&1 && + test -f conftest.o; then + if test -z "$ansi"; then + vl_cv_prog_cc_warnings="-v" + else + vl_cv_prog_cc_warnings="-v -Xc" + fi + + dnl Digital Unix C compiler + elif $CC -V 2>&1 | grep -i "Digital UNIX Compiler" > /dev/null 2>&1 && + $CC -c -verbose -w0 -warnprotos -std1 conftest.c > /dev/null 2>&1 && + test -f conftest.o; then + if test -z "$ansi"; then + vl_cv_prog_cc_warnings="-verbose -w0 -warnprotos" + else + vl_cv_prog_cc_warnings="-verbose -w0 -warnprotos -std1" + fi + + dnl C for AIX Compiler + elif $CC 2>&1 | grep -i "C for AIX Compiler" > /dev/null 2>&1 && + $CC -c -qlanglvl=ansi -qinfo=all conftest.c > /dev/null 2>&1 && + test -f conftest.o; then + if test -z "$ansi"; then + vl_cv_prog_cc_warnings="-qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" + else + vl_cv_prog_cc_warnings="-qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd -qlanglvl=ansi" + fi + + dnl IRIX C compiler + elif $CC -version 2>&1 | grep -i "MIPSpro Compilers" > /dev/null 2>&1 && + $CC -c -fullwarn -ansi -ansiE conftest.c > /dev/null 2>&1 && + test -f conftest.o; then + if test -z "$ansi"; then + vl_cv_prog_cc_warnings="-fullwarn" + else + vl_cv_prog_cc_warnings="-fullwarn -ansi -ansiE" + fi + + dnl HP-UX C compiler + elif what $CC 2>&1 | grep -i "HP C Compiler" > /dev/null 2>&1 && + $CC -c -Aa +w1 conftest.c > /dev/null 2>&1 && + test -f conftest.o; then + if test -z "$ansi"; then + vl_cv_prog_cc_warnings="+w1" + else + vl_cv_prog_cc_warnings="+w1 -Aa" + fi + + dnl The NEC SX-5 (Super-UX 10) C compiler + elif $CC -V 2>&1 | grep "/SX" > /dev/null 2>&1 && + $CC -c -pvctl[,]fullmsg -Xc conftest.c > /dev/null 2>&1 && + test -f conftest.o; then + if test -z "$ansi"; then + vl_cv_prog_cc_warnings="-pvctl[,]fullmsg" + else + vl_cv_prog_cc_warnings="-pvctl[,]fullmsg -Xc" + fi + + dnl The Cray C compiler (Unicos) + elif $CC -V 2>&1 | grep -i "Cray" > /dev/null 2>&1 && + $CC -c -h msglevel 2 conftest.c > /dev/null 2>&1 && + test -f conftest.o; then + if test -z "$ansi"; then + vl_cv_prog_cc_warnings="-h msglevel 2" + else + vl_cv_prog_cc_warnings="-h msglevel 2 -h conform" + fi + + fi + rm -f conftest.* + fi + if test -n "$vl_cv_prog_cc_warnings"; then + CFLAGS="$CFLAGS $vl_cv_prog_cc_warnings" + else + vl_cv_prog_cc_warnings="unknown" + fi + ]) +])dnl + +dnl --------------------------------------------------------------------------- +dnl Available from the GNU Autoconf Macro Archive at: +dnl http://autoconf-archive.cryp.to/ax_lang_compiler_ms.html +dnl --------------------------------------------------------------------------- + +dnl @synopsis AX_LANG_COMPILER_MS +dnl +dnl Check whether the compiler for the current language is Microsoft. +dnl +dnl This macro is modeled after _AC_LANG_COMPILER_GNU in the GNU +dnl Autoconf implementation. +dnl +dnl @category InstalledPackages +dnl @author Braden McDaniel +dnl @version 2004-11-15 +dnl @license AllPermissive + +AC_DEFUN([AX_LANG_COMPILER_MS], +[AC_CACHE_CHECK([whether we are using the Microsoft _AC_LANG compiler], + [ax_cv_[]_AC_LANG_ABBREV[]_compiler_ms], +[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [[#ifndef _MSC_VER + choke me +#endif +]])], + [ax_compiler_ms=yes], + [ax_compiler_ms=no]) +ax_cv_[]_AC_LANG_ABBREV[]_compiler_ms=$ax_compiler_ms +])]) + +dnl --------------------------------------------------------------------------- +dnl Available from the GNU Autoconf Macro Archive at: +dnl http://www.gnu.org/software/ac-archive/ax_check_gl.html +dnl --------------------------------------------------------------------------- + +dnl SYNOPSIS +dnl +dnl AX_CHECK_GL +dnl +dnl DESCRIPTION +dnl +dnl Check for an OpenGL implementation. If GL is found, the required +dnl compiler and linker flags are included in the output variables +dnl "GL_CFLAGS" and "GL_LIBS", respectively. If no usable GL implementation +dnl is found, "no_gl" is set to "yes". +dnl +dnl If the header "GL/gl.h" is found, "HAVE_GL_GL_H" is defined. If the +dnl header "OpenGL/gl.h" is found, HAVE_OPENGL_GL_H is defined. These +dnl preprocessor definitions may not be mutually exclusive. +dnl +dnl LICENSE +dnl +dnl Copyright (c) 2009 Braden McDaniel +dnl +dnl This program is free software; you can redistribute it and/or modify it +dnl under the terms of the GNU General Public License as published by the +dnl Free Software Foundation; either version 2 of the License, or (at your +dnl option) any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but +dnl WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +dnl Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License along +dnl with this program. If not, see . +dnl +dnl As a special exception, the respective Autoconf Macro's copyright owner +dnl gives unlimited permission to copy, distribute and modify the configure +dnl scripts that are the output of Autoconf when processing the Macro. You +dnl need not follow the terms of the GNU General Public License when using +dnl or distributing such scripts, even though portions of the text of the +dnl Macro appear in them. The GNU General Public License (GPL) does govern +dnl all other use of the material that constitutes the Autoconf Macro. +dnl +dnl This special exception to the GPL applies to versions of the Autoconf +dnl Macro released by the Autoconf Archive. When you make and distribute a +dnl modified version of the Autoconf Macro, you may extend this special +dnl exception to the GPL to apply to your modified version as well. + +AC_DEFUN([AX_CHECK_GL], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PATH_X])dnl +AC_REQUIRE([AX_PTHREAD])dnl + +AC_LANG_PUSH([C]) +AX_LANG_COMPILER_MS +AS_IF([test X$ax_compiler_ms = Xno], + [GL_CFLAGS="${PTHREAD_CFLAGS}"; GL_LIBS="${PTHREAD_LIBS} -lm"]) + +dnl +dnl Use x_includes and x_libraries if they have been set (presumably by +dnl AC_PATH_X). +dnl +AS_IF([test "X$no_x" != "Xyes"], + [AS_IF([test -n "$x_includes"], + [GL_CFLAGS="-I${x_includes} ${GL_CFLAGS}"])] + AS_IF([test -n "$x_libraries"], + [GL_LIBS="-L${x_libraries} -lX11 ${GL_LIBS}"])) + +ax_save_CPPFLAGS="${CPPFLAGS}" +CPPFLAGS="${GL_CFLAGS} ${CPPFLAGS}" +AC_CHECK_HEADERS([GL/gl.h OpenGL/gl.h]) +CPPFLAGS="${ax_save_CPPFLAGS}" + +AC_CHECK_HEADERS([windows.h]) + +m4_define([AX_CHECK_GL_PROGRAM], + [AC_LANG_PROGRAM([[ +# if defined(HAVE_WINDOWS_H) && defined(_WIN32) +# include +# endif +# ifdef HAVE_GL_GL_H +# include +# elif defined(HAVE_OPENGL_GL_H) +# include +# else +# error no gl.h +# endif]], + [[glBegin(0)]])]) + +AC_CACHE_CHECK([for OpenGL library], [ax_cv_check_gl_libgl], +[ax_cv_check_gl_libgl="no" +case $host_cpu in + x86_64) ax_check_gl_libdir=lib64 ;; + *) ax_check_gl_libdir=lib ;; +esac +ax_save_CPPFLAGS="${CPPFLAGS}" +CPPFLAGS="${GL_CFLAGS} ${CPPFLAGS}" +ax_save_LIBS="${LIBS}" +LIBS="" +ax_check_libs="-lopengl32 -lGL" +for ax_lib in ${ax_check_libs}; do + AS_IF([test X$ax_compiler_ms = Xyes], + [ax_try_lib=`echo $ax_lib | sed -e 's/^-l//' -e 's/$/.lib/'`], + [ax_try_lib="${ax_lib}"]) + LIBS="${ax_try_lib} ${GL_LIBS} ${ax_save_LIBS}" +AC_LINK_IFELSE([AX_CHECK_GL_PROGRAM], + [ax_cv_check_gl_libgl="${ax_try_lib}"; break], + [ax_check_gl_nvidia_flags="-L/usr/${ax_check_gl_libdir}/nvidia" LIBS="${ax_try_lib} ${ax_check_gl_nvidia_flags} ${GL_LIBS} ${ax_save_LIBS}" +AC_LINK_IFELSE([AX_CHECK_GL_PROGRAM], + [ax_cv_check_gl_libgl="${ax_try_lib} ${ax_check_gl_nvidia_flags}"; break], + [ax_check_gl_dylib_flag='-dylib_file /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib:/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib' LIBS="${ax_try_lib} ${ax_check_gl_dylib_flag} ${GL_LIBS} ${ax_save_LIBS}" +AC_LINK_IFELSE([AX_CHECK_GL_PROGRAM], + [ax_cv_check_gl_libgl="${ax_try_lib} ${ax_check_gl_dylib_flag}"; break])])]) +done + +AS_IF([test "X$ax_cv_check_gl_libgl" = Xno -a "X$no_x" = Xyes], +[LIBS='-framework OpenGL' +AC_LINK_IFELSE([AX_CHECK_GL_PROGRAM], + [ax_cv_check_gl_libgl="$LIBS"])]) + +LIBS=${ax_save_LIBS} +CPPFLAGS=${ax_save_CPPFLAGS}]) + +AS_IF([test "X$ax_cv_check_gl_libgl" = Xno], + [no_gl=yes; GL_CFLAGS=""; GL_LIBS=""], + [GL_LIBS="${ax_cv_check_gl_libgl} ${GL_LIBS}"]) +AC_LANG_POP([C]) + +AC_SUBST([GL_CFLAGS]) +AC_SUBST([GL_LIBS]) +])dnl + +dnl --------------------------------------------------------------------------- +dnl Available from the GNU Autoconf Macro Archive at: +dnl http://www.gnu.org/software/ac-archive/ax_check_glu.html +dnl --------------------------------------------------------------------------- + +dnl SYNOPSIS +dnl +dnl AX_CHECK_GLU +dnl +dnl DESCRIPTION +dnl +dnl Check for GLU. If GLU is found, the required preprocessor and linker +dnl flags are included in the output variables "GLU_CFLAGS" and "GLU_LIBS", +dnl respectively. If no GLU implementation is found, "no_glu" is set to +dnl "yes". +dnl +dnl If the header "GL/glu.h" is found, "HAVE_GL_GLU_H" is defined. If the +dnl header "OpenGL/glu.h" is found, HAVE_OPENGL_GLU_H is defined. These +dnl preprocessor definitions may not be mutually exclusive. +dnl +dnl Some implementations (in particular, some versions of Mac OS X) are +dnl known to treat the GLU tesselator callback function type as "GLvoid +dnl (*)(...)" rather than the standard "GLvoid (*)()". If the former +dnl condition is detected, this macro defines "HAVE_VARARGS_GLU_TESSCB". +dnl +dnl LICENSE +dnl +dnl Copyright (c) 2009 Braden McDaniel +dnl +dnl This program is free software; you can redistribute it and/or modify it +dnl under the terms of the GNU General Public License as published by the +dnl Free Software Foundation; either version 2 of the License, or (at your +dnl option) any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but +dnl WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +dnl Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License along +dnl with this program. If not, see . +dnl +dnl As a special exception, the respective Autoconf Macro's copyright owner +dnl gives unlimited permission to copy, distribute and modify the configure +dnl scripts that are the output of Autoconf when processing the Macro. You +dnl need not follow the terms of the GNU General Public License when using +dnl or distributing such scripts, even though portions of the text of the +dnl Macro appear in them. The GNU General Public License (GPL) does govern +dnl all other use of the material that constitutes the Autoconf Macro. +dnl +dnl This special exception to the GPL applies to versions of the Autoconf +dnl Macro released by the Autoconf Archive. When you make and distribute a +dnl modified version of the Autoconf Macro, you may extend this special +dnl exception to the GPL to apply to your modified version as well. + +AC_DEFUN([AX_CHECK_GLU], +[AC_REQUIRE([AX_CHECK_GL])dnl +AC_REQUIRE([AC_PROG_CXX])dnl +GLU_CFLAGS="${GL_CFLAGS}" + +ax_save_CPPFLAGS="${CPPFLAGS}" +CPPFLAGS="${GL_CFLAGS} ${CPPFLAGS}" +AC_CHECK_HEADERS([GL/glu.h OpenGL/glu.h]) +CPPFLAGS="${ax_save_CPPFLAGS}" + +m4_define([AX_CHECK_GLU_PROGRAM], + [AC_LANG_PROGRAM([[ +# if defined(HAVE_WINDOWS_H) && defined(_WIN32) +# include +# endif +# ifdef HAVE_GL_GLU_H +# include +# elif defined(HAVE_OPENGL_GLU_H) +# include +# else +# error no glu.h +# endif]], + [[gluBeginCurve(0)]])]) + +AC_CACHE_CHECK([for OpenGL Utility library], [ax_cv_check_glu_libglu], +[ax_cv_check_glu_libglu="no" +ax_save_CPPFLAGS="${CPPFLAGS}" +CPPFLAGS="${GL_CFLAGS} ${CPPFLAGS}" +ax_save_LIBS="${LIBS}" + +dnl +dnl First, check for the possibility that everything we need is already in +dnl GL_LIBS. +dnl +LIBS="${GL_LIBS} ${ax_save_LIBS}" +dnl +dnl libGLU typically links with libstdc++ on POSIX platforms. +dnl However, setting the language to C++ means that test program +dnl source is named "conftest.cc"; and Microsoft cl doesn't know what +dnl to do with such a file. +dnl +AC_LANG_PUSH([C++]) +AS_IF([test X$ax_compiler_ms = Xyes], + [AC_LANG_PUSH([C])]) +AC_LINK_IFELSE( +[AX_CHECK_GLU_PROGRAM], +[ax_cv_check_glu_libglu=yes], +[LIBS="" +ax_check_libs="-lglu32 -lGLU" +for ax_lib in ${ax_check_libs}; do + AS_IF([test X$ax_compiler_ms = Xyes], + [ax_try_lib=`echo $ax_lib | sed -e 's/^-l//' -e 's/$/.lib/'`], + [ax_try_lib="${ax_lib}"]) + LIBS="${ax_try_lib} ${GL_LIBS} ${ax_save_LIBS}" + AC_LINK_IFELSE([AX_CHECK_GLU_PROGRAM], + [ax_cv_check_glu_libglu="${ax_try_lib}"; break]) +done +]) +AS_IF([test X$ax_compiler_ms = Xyes], + [AC_LANG_POP([C])]) +AC_LANG_POP([C++]) + +LIBS=${ax_save_LIBS} +CPPFLAGS=${ax_save_CPPFLAGS}]) +AS_IF([test "X$ax_cv_check_glu_libglu" = Xno], + [no_glu=yes; GLU_CFLAGS=""; GLU_LIBS=""], + [AS_IF([test "X$ax_cv_check_glu_libglu" = Xyes], + [GLU_LIBS="$GL_LIBS"], + [GLU_LIBS="${ax_cv_check_glu_libglu} ${GL_LIBS}"])]) +AC_SUBST([GLU_CFLAGS]) +AC_SUBST([GLU_LIBS]) + +dnl +dnl Some versions of Mac OS X include a broken interpretation of the GLU +dnl tesselation callback function signature. +dnl +AS_IF([test "X$ax_cv_check_glu_libglu" != Xno], +[AC_CACHE_CHECK([for varargs GLU tesselator callback function type], + [ax_cv_varargs_glu_tesscb], +[ax_cv_varargs_glu_tesscb=no +ax_save_CFLAGS="$CFLAGS" +CFLAGS="$GL_CFLAGS $CFLAGS" +AC_COMPILE_IFELSE( +[AC_LANG_PROGRAM([[ +# ifdef HAVE_GL_GLU_H +# include +# else +# include +# endif]], + [[GLvoid (*func)(...); gluTessCallback(0, 0, func)]])], +[ax_cv_varargs_glu_tesscb=yes]) +CFLAGS="$ax_save_CFLAGS"]) +AS_IF([test X$ax_cv_varargs_glu_tesscb = Xyes], + [AC_DEFINE([HAVE_VARARGS_GLU_TESSCB], [1], + [Use nonstandard varargs form for the GLU tesselator callback])])]) +]) + +dnl --------------------------------------------------------------------------- +dnl Available from the GNU Autoconf Macro Archive at: +dnl http://www.gnu.org/software/ac-archive/ax_check_glut.html +dnl --------------------------------------------------------------------------- + +dnl +dnl SYNOPSIS +dnl +dnl AX_CHECK_GLUT +dnl +dnl DESCRIPTION +dnl +dnl Check for GLUT. If GLUT is found, the required compiler and linker flags +dnl are included in the output variables "GLUT_CFLAGS" and "GLUT_LIBS", +dnl respectively. If GLUT is not found, "no_glut" is set to "yes". +dnl +dnl If the header "GL/glut.h" is found, "HAVE_GL_GLUT_H" is defined. If the +dnl header "GLUT/glut.h" is found, HAVE_GLUT_GLUT_H is defined. These +dnl preprocessor definitions may not be mutually exclusive. +dnl +dnl LICENSE +dnl +dnl Copyright (c) 2009 Braden McDaniel +dnl +dnl This program is free software; you can redistribute it and/or modify it +dnl under the terms of the GNU General Public License as published by the +dnl Free Software Foundation; either version 2 of the License, or (at your +dnl option) any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but +dnl WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +dnl Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License along +dnl with this program. If not, see . +dnl +dnl As a special exception, the respective Autoconf Macro's copyright owner +dnl gives unlimited permission to copy, distribute and modify the configure +dnl scripts that are the output of Autoconf when processing the Macro. You +dnl need not follow the terms of the GNU General Public License when using +dnl or distributing such scripts, even though portions of the text of the +dnl Macro appear in them. The GNU General Public License (GPL) does govern +dnl all other use of the material that constitutes the Autoconf Macro. +dnl +dnl This special exception to the GPL applies to versions of the Autoconf +dnl Macro released by the Autoconf Archive. When you make and distribute a +dnl modified version of the Autoconf Macro, you may extend this special +dnl exception to the GPL to apply to your modified version as well. + +AC_DEFUN([AX_CHECK_GLUT], +[AC_REQUIRE([AX_CHECK_GLU])dnl +AC_REQUIRE([AC_PATH_XTRA])dnl + +ax_save_CPPFLAGS="${CPPFLAGS}" +CPPFLAGS="${GLU_CFLAGS} ${CPPFLAGS}" +AC_CHECK_HEADERS([GL/glut.h GLUT/glut.h]) +CPPFLAGS="${ax_save_CPPFLAGS}" + +GLUT_CFLAGS=${GLU_CFLAGS} +GLUT_LIBS=${GLU_LIBS} + +m4_define([AX_CHECK_GLUT_PROGRAM], + [AC_LANG_PROGRAM([[ +# if HAVE_WINDOWS_H && defined(_WIN32) +# include +# endif +# ifdef HAVE_GL_GLUT_H +# include +# elif defined(HAVE_GLUT_GLUT_H) +# include +# else +# error no glut.h +# endif]], + [[glutMainLoop()]])]) + +dnl +dnl If X is present, assume GLUT depends on it. +dnl +AS_IF([test X$no_x != Xyes], + [GLUT_LIBS="${X_PRE_LIBS} -lXi ${X_EXTRA_LIBS} ${GLUT_LIBS}"]) + +AC_CACHE_CHECK([for GLUT library], [ax_cv_check_glut_libglut], +[ax_cv_check_glut_libglut="no" +AC_LANG_PUSH(C) +ax_save_CPPFLAGS="${CPPFLAGS}" +CPPFLAGS="${GLUT_CFLAGS} ${CPPFLAGS}" +ax_save_LIBS="${LIBS}" +LIBS="" +ax_check_libs="-lglut32 -lglut" +for ax_lib in ${ax_check_libs}; do + AS_IF([test X$ax_compiler_ms = Xyes], + [ax_try_lib=`echo $ax_lib | sed -e 's/^-l//' -e 's/$/.lib/'`], + [ax_try_lib="${ax_lib}"]) + LIBS="${ax_try_lib} ${GLUT_LIBS} ${ax_save_LIBS}" + AC_LINK_IFELSE([AX_CHECK_GLUT_PROGRAM], + [ax_cv_check_glut_libglut="${ax_try_lib}"; break]) +done + +AS_IF([test "X$ax_cv_check_glut_libglut" = Xno -a "X$no_x" = Xyes], +[LIBS='-framework GLUT' +AC_LINK_IFELSE([AX_CHECK_GLUT_PROGRAM], + [ax_cv_check_glut_libglut="$LIBS"])]) + +CPPFLAGS="${ax_save_CPPFLAGS}" +LIBS="${ax_save_LIBS}" +AC_LANG_POP(C)]) + +AS_IF([test "X$ax_cv_check_glut_libglut" = Xno], + [no_glut="yes"; GLUT_CFLAGS=""; GLUT_LIBS=""], + [GLUT_LIBS="${ax_cv_check_glut_libglut} ${GLUT_LIBS}"]) + +AC_SUBST([GLUT_CFLAGS]) +AC_SUBST([GLUT_LIBS]) +])dnl + +dnl --------------------------------------------------------------------------- +dnl Available from the GNU Autoconf Macro Archive at: +dnl http://www.gnu.org/software/autoconf-archive/ax_pthread.html +dnl --------------------------------------------------------------------------- + +dnl SYNOPSIS +dnl +dnl AX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]]) +dnl +dnl DESCRIPTION +dnl +dnl This macro figures out how to build C programs using POSIX threads. It +dnl sets the PTHREAD_LIBS output variable to the threads library and linker +dnl flags, and the PTHREAD_CFLAGS output variable to any special C compiler +dnl flags that are needed. (The user can also force certain compiler +dnl flags/libs to be tested by setting these environment variables.) +dnl +dnl Also sets PTHREAD_CC to any special C compiler that is needed for +dnl multi-threaded programs (defaults to the value of CC otherwise). (This +dnl is necessary on AIX to use the special cc_r compiler alias.) +dnl +dnl NOTE: You are assumed to not only compile your program with these flags, +dnl but also link it with them as well. e.g. you should link with +dnl $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS +dnl +dnl If you are only building threads programs, you may wish to use these +dnl variables in your default LIBS, CFLAGS, and CC: +dnl +dnl LIBS="$PTHREAD_LIBS $LIBS" +dnl CFLAGS="$CFLAGS $PTHREAD_CFLAGS" +dnl CC="$PTHREAD_CC" +dnl +dnl In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant +dnl has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to that name +dnl (e.g. PTHREAD_CREATE_UNDETACHED on AIX). +dnl +dnl ACTION-IF-FOUND is a list of shell commands to run if a threads library +dnl is found, and ACTION-IF-NOT-FOUND is a list of commands to run it if it +dnl is not found. If ACTION-IF-FOUND is not specified, the default action +dnl will define HAVE_PTHREAD. +dnl +dnl Please let the authors know if this macro fails on any platform, or if +dnl you have any other suggestions or comments. This macro was based on work +dnl by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) (with help +dnl from M. Frigo), as well as ac_pthread and hb_pthread macros posted by +dnl Alejandro Forero Cuervo to the autoconf macro repository. We are also +dnl grateful for the helpful feedback of numerous users. +dnl +dnl LICENSE +dnl +dnl Copyright (c) 2008 Steven G. Johnson +dnl +dnl This program is free software: you can redistribute it and/or modify it +dnl under the terms of the GNU General Public License as published by the +dnl Free Software Foundation, either version 3 of the License, or (at your +dnl option) any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but +dnl WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +dnl Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License along +dnl with this program. If not, see . +dnl +dnl As a special exception, the respective Autoconf Macro's copyright owner +dnl gives unlimited permission to copy, distribute and modify the configure +dnl scripts that are the output of Autoconf when processing the Macro. You +dnl need not follow the terms of the GNU General Public License when using +dnl or distributing such scripts, even though portions of the text of the +dnl Macro appear in them. The GNU General Public License (GPL) does govern +dnl all other use of the material that constitutes the Autoconf Macro. +dnl +dnl This special exception to the GPL applies to versions of the Autoconf +dnl Macro released by the Autoconf Archive. When you make and distribute a +dnl modified version of the Autoconf Macro, you may extend this special +dnl exception to the GPL to apply to your modified version as well. + +AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD]) +AC_DEFUN([AX_PTHREAD], [ +AC_REQUIRE([AC_CANONICAL_HOST]) +AC_LANG_SAVE +AC_LANG_C +ax_pthread_ok=no + +dnl We used to check for pthread.h first, but this fails if pthread.h +dnl requires special compiler flags (e.g. on True64 or Sequent). +dnl It gets checked for in the link test anyway. + +dnl First of all, check if the user has set any of the PTHREAD_LIBS, +dnl etcetera environment variables, and if threads linking works using +dnl them: +if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + save_LIBS="$LIBS" + LIBS="$PTHREAD_LIBS $LIBS" + AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS]) + AC_TRY_LINK_FUNC(pthread_join, ax_pthread_ok=yes) + AC_MSG_RESULT($ax_pthread_ok) + if test x"$ax_pthread_ok" = xno; then + PTHREAD_LIBS="" + PTHREAD_CFLAGS="" + fi + LIBS="$save_LIBS" + CFLAGS="$save_CFLAGS" +fi + +dnl We must check for the threads library under a number of different +dnl names; the ordering is very important because some systems +dnl (e.g. DEC) have both -lpthread and -lpthreads, where one of the +dnl libraries is broken (non-POSIX). + +dnl Create a list of thread flags to try. Items starting with a "-" are +dnl C compiler flags, and other items are library names, except for "none" +dnl which indicates that we try without any flags at all, and "pthread-config" +dnl which is a program returning the flags for the Pth emulation library. + +ax_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config" + +dnl The ordering *is* (sometimes) important. Some notes on the +dnl individual items follow: + +dnl pthreads: AIX (must check this before -lpthread) +dnl none: in case threads are in libc; should be tried before -Kthread and +dnl other compiler flags to prevent continual compiler warnings +dnl -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h) +dnl -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able) +dnl lthread: LinuxThreads port on FreeBSD (also preferred to -pthread) +dnl -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads) +dnl -pthreads: Solaris/gcc +dnl -mthreads: Mingw32/gcc, Lynx/gcc +dnl -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it +dnl doesn't hurt to check since this sometimes defines pthreads too; +dnl also defines -D_REENTRANT) +dnl ... -mt is also the pthreads flag for HP/aCC +dnl pthread: Linux, etcetera +dnl --thread-safe: KAI C++ +dnl pthread-config: use pthread-config program (for GNU Pth library) + +case "${host_cpu}-${host_os}" in + *solaris*) + + dnl On Solaris (at least, for some versions), libc contains stubbed + dnl (non-functional) versions of the pthreads routines, so link-based + dnl tests will erroneously succeed. (We need to link with -pthreads/-mt/ + dnl -lpthread.) (The stubs are missing pthread_cleanup_push, or rather + dnl a function called by this macro, so we could check for that, but + dnl who knows whether they'll stub that too in a future libc.) So, + dnl we'll just look for -pthreads and -lpthread first: + + ax_pthread_flags="-pthreads pthread -mt -pthread $ax_pthread_flags" + ;; + + *-darwin*) + ax_pthread_flags="-pthread $ax_pthread_flags" + ;; +esac + +if test x"$ax_pthread_ok" = xno; then +for flag in $ax_pthread_flags; do + + case $flag in + none) + AC_MSG_CHECKING([whether pthreads work without any flags]) + ;; + + -*) + AC_MSG_CHECKING([whether pthreads work with $flag]) + PTHREAD_CFLAGS="$flag" + ;; + + pthread-config) + AC_CHECK_PROG(ax_pthread_config, pthread-config, yes, no) + if test x"$ax_pthread_config" = xno; then continue; fi + PTHREAD_CFLAGS="`pthread-config --cflags`" + PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`" + ;; + + *) + AC_MSG_CHECKING([for the pthreads library -l$flag]) + PTHREAD_LIBS="-l$flag" + ;; + esac + + save_LIBS="$LIBS" + save_CFLAGS="$CFLAGS" + LIBS="$PTHREAD_LIBS $LIBS" + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + + dnl Check for various functions. We must include pthread.h, + dnl since some functions may be macros. (On the Sequent, we + dnl need a special flag -Kthread to make this header compile.) + dnl We check for pthread_join because it is in -lpthread on IRIX + dnl while pthread_create is in libc. We check for pthread_attr_init + dnl due to DEC craziness with -lpthreads. We check for + dnl pthread_cleanup_push because it is one of the few pthread + dnl functions on Solaris that doesn't have a non-functional libc stub. + dnl We try pthread_create on general principles. + AC_TRY_LINK([#include + static void routine(void* a) {a=0;} + static void* start_routine(void* a) {return a;}], + [pthread_t th; pthread_attr_t attr; + pthread_create(&th,0,start_routine,0); + pthread_join(th, 0); + pthread_attr_init(&attr); + pthread_cleanup_push(routine, 0); + pthread_cleanup_pop(0); ], + [ax_pthread_ok=yes]) + + LIBS="$save_LIBS" + CFLAGS="$save_CFLAGS" + + AC_MSG_RESULT($ax_pthread_ok) + if test "x$ax_pthread_ok" = xyes; then + break; + fi + + PTHREAD_LIBS="" + PTHREAD_CFLAGS="" +done +fi + +dnl Various other checks: +if test "x$ax_pthread_ok" = xyes; then + save_LIBS="$LIBS" + LIBS="$PTHREAD_LIBS $LIBS" + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + + dnl Detect AIX lossage: JOINABLE attribute is called UNDETACHED. + AC_MSG_CHECKING([for joinable pthread attribute]) + attr_name=unknown + for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do + AC_TRY_LINK([#include ], [int attr=$attr; return attr;], + [attr_name=$attr; break]) + done + AC_MSG_RESULT($attr_name) + if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then + AC_DEFINE_UNQUOTED(PTHREAD_CREATE_JOINABLE, $attr_name, + [Define to necessary symbol if this constant + uses a non-standard name on your system.]) + fi + + AC_MSG_CHECKING([if more special flags are required for pthreads]) + flag=no + case "${host_cpu}-${host_os}" in + *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";; + *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";; + esac + AC_MSG_RESULT(${flag}) + if test "x$flag" != xno; then + PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS" + fi + + LIBS="$save_LIBS" + CFLAGS="$save_CFLAGS" + + dnl More AIX lossage: must compile with xlc_r or cc_r + if test x"$GCC" != xyes; then + AC_CHECK_PROGS(PTHREAD_CC, xlc_r cc_r, ${CC}) + else + PTHREAD_CC=$CC + fi +else + PTHREAD_CC="$CC" +fi + +AC_SUBST(PTHREAD_LIBS) +AC_SUBST(PTHREAD_CFLAGS) +AC_SUBST(PTHREAD_CC) + +dnl Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND: +if test x"$ax_pthread_ok" = xyes; then + ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1]) + : +else + ax_pthread_ok=no + $2 +fi +AC_LANG_RESTORE +])dnl AX_PTHREAD diff --git a/src/SDL2/external/tiff-4.0.3/m4/libtool.m4 b/src/SDL2/external/tiff-4.0.3/m4/libtool.m4 new file mode 100644 index 000000000..49216cbc8 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/m4/libtool.m4 @@ -0,0 +1,7982 @@ +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +]) + +# serial 57 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +_LT_SETUP + +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +m4_defun([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl + +_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl +dnl +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_WITH_SYSROOT])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR + +m4_require([_LT_TAG_COMPILER])dnl + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + _LT_PATH_MAGIC + fi + ;; +esac + +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + + +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from `configure', and `config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# `config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain="$ac_aux_dir/ltmain.sh" +])# _LT_PROG_LTMAIN + + +## ------------------------------------- ## +## Accumulate code for creating libtool. ## +## ------------------------------------- ## + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the `libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + +## ------------------------ ## +## FIXME: Eliminate VARNAME ## +## ------------------------ ## + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to `config.status' so that its +# declaration there will have the same value as in `configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags="_LT_TAGS"dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# `#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test $lt_write_fail = 0 && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to ." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2011 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test $[#] != 0 +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try \`$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try \`$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +_LT_COPYING +_LT_LIBTOOL_TAGS + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + _LT_PROG_REPLACE_SHELLFNS + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Go], [_LT_LANG(GO)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +m4_ifndef([AC_PROG_GO], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_GO. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ +m4_defun([AC_PROG_GO], +[AC_LANG_PUSH(Go)dnl +AC_ARG_VAR([GOC], [Go compiler command])dnl +AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl +_AC_ARG_VAR_LDFLAGS()dnl +AC_CHECK_TOOL(GOC, gccgo) +if test -z "$GOC"; then + if test -n "$ac_tool_prefix"; then + AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) + fi +fi +if test -z "$GOC"; then + AC_CHECK_PROG(GOC, gccgo, gccgo, false) +fi +])#m4_defun +])#m4_ifndef + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([AC_PROG_GO], + [LT_LANG(GO)], + [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS="$save_LDFLAGS" + ]) + + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[[012]]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES([TAG]) +# --------------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], + [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + m4_if([$1], [CXX], +[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) +# ---------------------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +# Store the results from the different compilers for each TAGNAME. +# Allow to override them for all tags through lt_cv_aix_libpath. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], + [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ + lt_aix_libpath_sed='[ + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }]' + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" + fi + ]) + aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) +fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script which will find a shell with a builtin +# printf (which we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +case "$ECHO" in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac + +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_WITH_SYSROOT +# ---------------- +AC_DEFUN([_LT_WITH_SYSROOT], +[AC_MSG_CHECKING([for sysroot]) +AC_ARG_WITH([sysroot], +[ --with-sysroot[=DIR] Search for dependent libraries within DIR + (or the compiler's sysroot if not specified).], +[], [with_sysroot=no]) + +dnl lt_sysroot will always be passed unquoted. We quote it here +dnl in case the user passed a directory name. +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + AC_MSG_RESULT([${with_sysroot}]) + AC_MSG_ERROR([The sysroot must be an absolute path.]) + ;; +esac + + AC_MSG_RESULT([${lt_sysroot:-no}]) +_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl +[dependent libraries, and in which our libraries should be installed.])]) + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*|x86_64-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" +])# _LT_ENABLE_LOCK + + +# _LT_PROG_AR +# ----------- +m4_defun([_LT_PROG_AR], +[AC_CHECK_TOOLS(AR, [ar], false) +: ${AR=ar} +: ${AR_FLAGS=cru} +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], + [lt_cv_ar_at_file=no + AC_COMPILE_IFELSE([AC_LANG_PROGRAM], + [echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + ]) + ]) + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi +_LT_DECL([], [archiver_list_spec], [1], + [How to feed a file listing to the archiver]) +])# _LT_PROG_AR + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[_LT_PROG_AR + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test x"[$]$2" = xyes; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links="nottested" +if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || + test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[[4-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[23]].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], + [Run-time system search path for libraries]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program which can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program which can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method = "file_magic"]) +_LT_DECL([], [file_magic_glob], [1], + [How to find potential files when deplibs_check_method = "file_magic"]) +_LT_DECL([], [want_nocaseglob], [1], + [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi]) +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + +# _LT_CHECK_SHAREDLIB_FROM_LINKLIB +# -------------------------------- +# how to determine the name of the shared library +# associated with a specific link library. +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +m4_require([_LT_DECL_DLLTOOL]) +AC_CACHE_CHECK([how to associate runtime and link libraries], +lt_cv_sharedlib_from_linklib_cmd, +[lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac +]) +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + +_LT_DECL([], [sharedlib_from_linklib_cmd], [1], + [Command to associate shared and link libraries]) +])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB + + +# _LT_PATH_MANIFEST_TOOL +# ---------------------- +# locate the manifest tool +m4_defun([_LT_PATH_MANIFEST_TOOL], +[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&AS_MESSAGE_LOG_FD + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest*]) +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi +_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl +])# _LT_PATH_MANIFEST_TOOL + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT@&t@_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT@&t@_DLSYM_CONST +#else +# define LT@&t@_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT@&t@_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([], [nm_file_list_spec], [1], + [Specify filename containing input files for $NM]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ F* | *Sun*Fortran*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + *Intel*\ [[CF]]*Compiler*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + *Portland\ Group*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac + +AC_CACHE_CHECK([for $compiler option to produce PIC], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + ;; + esac + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + esac + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], + [lt_cv_irix_exported_symbol], + [save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE( + [AC_LANG_SOURCE( + [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], + [C++], [[int foo (void) { return 0; }]], + [Fortran 77], [[ + subroutine foo + end]], + [Fortran], [[ + subroutine foo + end]])])], + [lt_cv_irix_exported_symbol=yes], + [lt_cv_irix_exported_symbol=no]) + LDFLAGS="$save_LDFLAGS"]) + if test "$lt_cv_irix_exported_symbol" = yes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting ${shlibpath_var} if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [postlink_cmds], [2], + [Commands necessary for finishing linking programs]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC="$lt_save_CC" +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + gnu*) + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + + _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_FUNC_STRIPNAME_CNF +# ---------------------- +# func_stripname_cnf prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# +# This function is identical to the (non-XSI) version of func_stripname, +# except this one can be used by m4 code that may be executed by configure, +# rather than the libtool script. +m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl +AC_REQUIRE([_LT_DECL_SED]) +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) +func_stripname_cnf () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname_cnf +])# _LT_FUNC_STRIPNAME_CNF + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF +package foo +func foo() { +} +_LT_EOF +]) + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac + +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)="$p" + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)="$p" + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_F77" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} + CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$G77" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" + CFLAGS="$lt_save_CFLAGS" +fi # test "$_lt_disable_F77" != yes + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test "$_lt_disable_FC" != yes + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +CFLAGS=$GCJFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_GO_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Go compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GO_CONFIG], +[AC_REQUIRE([LT_PROG_GO])dnl +AC_LANG_SAVE + +# Source file extension for Go test sources. +ac_ext=go + +# Object file extension for compiled Go test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="package main; func main() { }" + +# Code to be used in simple link tests +lt_simple_link_test_code='package main; func main() { }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GOC-"gccgo"} +CFLAGS=$GOFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# Go did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GO_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_GO +# ---------- +AC_DEFUN([LT_PROG_GO], +[AC_CHECK_TOOL(GOC, gccgo,) +]) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + +# _LT_DECL_DLLTOOL +# ---------------- +# Ensure DLLTOOL variable is set. +m4_defun([_LT_DECL_DLLTOOL], +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) +AC_SUBST([DLLTOOL]) +]) + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +AC_MSG_RESULT([$xsi_shell]) +_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +AC_MSG_CHECKING([whether the shell understands "+="]) +lt_shell_append=no +( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +AC_MSG_RESULT([$lt_shell_append]) +_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) +# ------------------------------------------------------ +# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and +# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. +m4_defun([_LT_PROG_FUNCTION_REPLACE], +[dnl { +sed -e '/^$1 ()$/,/^} # $1 /c\ +$1 ()\ +{\ +m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) +} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: +]) + + +# _LT_PROG_REPLACE_SHELLFNS +# ------------------------- +# Replace existing portable implementations of several shell functions with +# equivalent extended shell implementations where those features are available.. +m4_defun([_LT_PROG_REPLACE_SHELLFNS], +[if test x"$xsi_shell" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl + func_split_long_opt_name=${1%%=*} + func_split_long_opt_arg=${1#*=}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) + + _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) + + _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) + + _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) +fi + +if test x"$lt_shell_append" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) + + _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl + func_quote_for_eval "${2}" +dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ + eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) +fi +]) + +# _LT_PATH_CONVERSION_FUNCTIONS +# ----------------------------- +# Determine which file name conversion functions should be used by +# func_to_host_file (and, implicitly, by func_to_host_path). These are needed +# for certain cross-compile configurations and native mingw. +m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_MSG_CHECKING([how to convert $build file names to $host format]) +AC_CACHE_VAL(lt_cv_to_host_file_cmd, +[case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +]) +to_host_file_cmd=$lt_cv_to_host_file_cmd +AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) +_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], + [0], [convert $build file names to $host format])dnl + +AC_MSG_CHECKING([how to convert $build file names to toolchain format]) +AC_CACHE_VAL(lt_cv_to_tool_file_cmd, +[#assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac +]) +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) +_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], + [0], [convert $build files to toolchain format])dnl +])# _LT_PATH_CONVERSION_FUNCTIONS diff --git a/src/SDL2/external/tiff-4.0.3/m4/ltoptions.m4 b/src/SDL2/external/tiff-4.0.3/m4/ltoptions.m4 new file mode 100644 index 000000000..5d9acd8e2 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/m4/ltoptions.m4 @@ -0,0 +1,384 @@ +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 7 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option `$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + ]) +])# _LT_SET_OPTIONS + + +## --------------------------------- ## +## Macros to handle LT_INIT options. ## +## --------------------------------- ## + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [pic_mode=default]) + +test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + +## ----------------- ## +## LTDL_INIT Options ## +## ----------------- ## + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) diff --git a/src/SDL2/external/tiff-4.0.3/m4/ltsugar.m4 b/src/SDL2/external/tiff-4.0.3/m4/ltsugar.m4 new file mode 100644 index 000000000..9000a057d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/m4/ltsugar.m4 @@ -0,0 +1,123 @@ +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) diff --git a/src/SDL2/external/tiff-4.0.3/m4/ltversion.m4 b/src/SDL2/external/tiff-4.0.3/m4/ltversion.m4 new file mode 100644 index 000000000..07a8602d4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/m4/ltversion.m4 @@ -0,0 +1,23 @@ +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# @configure_input@ + +# serial 3337 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.4.2]) +m4_define([LT_PACKAGE_REVISION], [1.3337]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.4.2' +macro_revision='1.3337' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) diff --git a/src/SDL2/external/tiff-4.0.3/m4/lt~obsolete.m4 b/src/SDL2/external/tiff-4.0.3/m4/lt~obsolete.m4 new file mode 100644 index 000000000..c573da90c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/m4/lt~obsolete.m4 @@ -0,0 +1,98 @@ +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) diff --git a/src/SDL2/external/tiff-4.0.3/man/Makefile.am b/src/SDL2/external/tiff-4.0.3/man/Makefile.am new file mode 100644 index 000000000..bcad9ba70 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/Makefile.am @@ -0,0 +1,98 @@ +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +dist_man1_MANS = \ + bmp2tiff.1 \ + fax2ps.1 \ + fax2tiff.1 \ + gif2tiff.1 \ + pal2rgb.1 \ + ppm2tiff.1 \ + ras2tiff.1 \ + raw2tiff.1 \ + rgb2ycbcr.1 \ + sgi2tiff.1 \ + thumbnail.1 \ + tiff2bw.1 \ + tiff2pdf.1 \ + tiff2ps.1 \ + tiff2rgba.1 \ + tiffcmp.1 \ + tiffcp.1 \ + tiffcrop.1 \ + tiffdither.1 \ + tiffdump.1 \ + tiffgt.1 \ + tiffinfo.1 \ + tiffmedian.1 \ + tiffset.1 \ + tiffsplit.1 \ + tiffsv.1 + +dist_man3_MANS = \ + libtiff.3tiff \ + TIFFbuffer.3tiff \ + TIFFClose.3tiff \ + TIFFcodec.3tiff \ + TIFFcolor.3tiff \ + TIFFDataWidth.3tiff \ + TIFFError.3tiff \ + TIFFFieldDataType.3tiff \ + TIFFFieldName.3tiff \ + TIFFFieldPassCount.3tiff \ + TIFFFieldReadCount.3tiff \ + TIFFFieldTag.3tiff \ + TIFFFieldWriteCount.3tiff \ + TIFFFlush.3tiff \ + TIFFGetField.3tiff \ + TIFFmemory.3tiff \ + TIFFOpen.3tiff \ + TIFFPrintDirectory.3tiff \ + TIFFquery.3tiff \ + TIFFReadDirectory.3tiff \ + TIFFReadEncodedStrip.3tiff \ + TIFFReadEncodedTile.3tiff \ + TIFFReadRawStrip.3tiff \ + TIFFReadRawTile.3tiff \ + TIFFReadRGBAImage.3tiff \ + TIFFReadRGBAStrip.3tiff \ + TIFFReadRGBATile.3tiff \ + TIFFReadScanline.3tiff \ + TIFFReadTile.3tiff \ + TIFFRGBAImage.3tiff \ + TIFFSetDirectory.3tiff \ + TIFFSetField.3tiff \ + TIFFsize.3tiff \ + TIFFstrip.3tiff \ + TIFFswab.3tiff \ + TIFFtile.3tiff \ + TIFFWarning.3tiff \ + TIFFWriteDirectory.3tiff \ + TIFFWriteEncodedStrip.3tiff \ + TIFFWriteEncodedTile.3tiff \ + TIFFWriteRawStrip.3tiff \ + TIFFWriteRawTile.3tiff \ + TIFFWriteScanline.3tiff \ + TIFFWriteTile.3tiff diff --git a/src/SDL2/external/tiff-4.0.3/man/Makefile.in b/src/SDL2/external/tiff-4.0.3/man/Makefile.in new file mode 100644 index 000000000..ff60f6f39 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/Makefile.in @@ -0,0 +1,661 @@ +# Makefile.in generated by automake 1.12.4 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = man +DIST_COMMON = $(dist_man1_MANS) $(dist_man3_MANS) \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/mkinstalldirs +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/libtiff/tif_config.h \ + $(top_builddir)/libtiff/tiffconf.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +man1dir = $(mandir)/man1 +am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man3dir)" +man3dir = $(mandir)/man3 +NROFF = nroff +MANS = $(dist_man1_MANS) $(dist_man3_MANS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GLUT_CFLAGS = @GLUT_CFLAGS@ +GLUT_LIBS = @GLUT_LIBS@ +GLU_CFLAGS = @GLU_CFLAGS@ +GLU_LIBS = @GLU_LIBS@ +GL_CFLAGS = @GL_CFLAGS@ +GL_LIBS = @GL_LIBS@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBDIR = @LIBDIR@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTIFF_ALPHA_VERSION = @LIBTIFF_ALPHA_VERSION@ +LIBTIFF_DOCDIR = @LIBTIFF_DOCDIR@ +LIBTIFF_MAJOR_VERSION = @LIBTIFF_MAJOR_VERSION@ +LIBTIFF_MICRO_VERSION = @LIBTIFF_MICRO_VERSION@ +LIBTIFF_MINOR_VERSION = @LIBTIFF_MINOR_VERSION@ +LIBTIFF_RELEASE_DATE = @LIBTIFF_RELEASE_DATE@ +LIBTIFF_VERSION = @LIBTIFF_VERSION@ +LIBTIFF_VERSION_INFO = @LIBTIFF_VERSION_INFO@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +tiff_libs_private = @tiff_libs_private@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +dist_man1_MANS = \ + bmp2tiff.1 \ + fax2ps.1 \ + fax2tiff.1 \ + gif2tiff.1 \ + pal2rgb.1 \ + ppm2tiff.1 \ + ras2tiff.1 \ + raw2tiff.1 \ + rgb2ycbcr.1 \ + sgi2tiff.1 \ + thumbnail.1 \ + tiff2bw.1 \ + tiff2pdf.1 \ + tiff2ps.1 \ + tiff2rgba.1 \ + tiffcmp.1 \ + tiffcp.1 \ + tiffcrop.1 \ + tiffdither.1 \ + tiffdump.1 \ + tiffgt.1 \ + tiffinfo.1 \ + tiffmedian.1 \ + tiffset.1 \ + tiffsplit.1 \ + tiffsv.1 + +dist_man3_MANS = \ + libtiff.3tiff \ + TIFFbuffer.3tiff \ + TIFFClose.3tiff \ + TIFFcodec.3tiff \ + TIFFcolor.3tiff \ + TIFFDataWidth.3tiff \ + TIFFError.3tiff \ + TIFFFieldDataType.3tiff \ + TIFFFieldName.3tiff \ + TIFFFieldPassCount.3tiff \ + TIFFFieldReadCount.3tiff \ + TIFFFieldTag.3tiff \ + TIFFFieldWriteCount.3tiff \ + TIFFFlush.3tiff \ + TIFFGetField.3tiff \ + TIFFmemory.3tiff \ + TIFFOpen.3tiff \ + TIFFPrintDirectory.3tiff \ + TIFFquery.3tiff \ + TIFFReadDirectory.3tiff \ + TIFFReadEncodedStrip.3tiff \ + TIFFReadEncodedTile.3tiff \ + TIFFReadRawStrip.3tiff \ + TIFFReadRawTile.3tiff \ + TIFFReadRGBAImage.3tiff \ + TIFFReadRGBAStrip.3tiff \ + TIFFReadRGBATile.3tiff \ + TIFFReadScanline.3tiff \ + TIFFReadTile.3tiff \ + TIFFRGBAImage.3tiff \ + TIFFSetDirectory.3tiff \ + TIFFSetField.3tiff \ + TIFFsize.3tiff \ + TIFFstrip.3tiff \ + TIFFswab.3tiff \ + TIFFtile.3tiff \ + TIFFWarning.3tiff \ + TIFFWriteDirectory.3tiff \ + TIFFWriteEncodedStrip.3tiff \ + TIFFWriteEncodedTile.3tiff \ + TIFFWriteRawStrip.3tiff \ + TIFFWriteRawTile.3tiff \ + TIFFWriteScanline.3tiff \ + TIFFWriteTile.3tiff + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign man/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-man1: $(dist_man1_MANS) + @$(NORMAL_INSTALL) + @list1='$(dist_man1_MANS)'; \ + list2=''; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) +install-man3: $(dist_man3_MANS) + @$(NORMAL_INSTALL) + @list1='$(dist_man3_MANS)'; \ + list2=''; \ + test -n "$(man3dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.3[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ + done; } + +uninstall-man3: + @$(NORMAL_UNINSTALL) + @list='$(dist_man3_MANS)'; test -n "$(man3dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir) +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically 'make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(MANS) +installdirs: + for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man3dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-man + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man1 install-man3 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-man + +uninstall-man: uninstall-man1 uninstall-man3 + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-man1 \ + install-man3 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am uninstall uninstall-am uninstall-man uninstall-man1 \ + uninstall-man3 + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFClose.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFClose.3tiff new file mode 100644 index 000000000..bcb760443 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFClose.3tiff @@ -0,0 +1,53 @@ +.\" $Id: TIFFClose.3tiff,v 1.3 2009-08-24 19:13:40 bfriesen Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFClose 3TIFF "November 2, 2005" "libtiff" +.SH NAME +TIFFClose \- close a previously opened +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "void TIFFClose(TIFF *" tif ")" +.SH DESCRIPTION +.IR TIFFClose +closes a file that was previously opened with +.BR TIFFOpen (3TIFF). +Any buffered data are flushed to the file, including the contents of the +current directory (if modified); and all resources are reclaimed. +.SH DIAGNOSTICS +All error messages are directed to the +.BR TIFFError (3TIFF) +routine. +Likewise, warning messages are directed to the +.BR TIFFWarning (3TIFF) +routine. +.SH "SEE ALSO" +.BR libtiff (3TIFF), +.BR TIFFOpen (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFDataWidth.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFDataWidth.3tiff new file mode 100644 index 000000000..cb274d891 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFDataWidth.3tiff @@ -0,0 +1,74 @@ +.\" $Id: TIFFDataWidth.3tiff,v 1.3 2006-03-23 14:54:02 dron Exp $ +.\" +.\" Copyright (c) 2002, Andrey Kiselev +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFDataWidth 3TIFF "September 12, 2002" "libtiff" +.SH NAME +TIFFDataWidth \- Get the size of TIFF data types +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFDataWidth(TIFFDataType " type ")" +.SH DESCRIPTION +.I TIFFDataWidth +returns a size of +.I type +in bytes. +Currently following data types are supported: +.br +.I TIFF_BYTE +.br +.I TIFF_ASCII +.br +.I TIFF_SBYTE +.br +.I TIFF_UNDEFINED +.br +.I TIFF_SHORT +.br +.I TIFF_SSHORT +.br +.I TIFF_LONG +.br +.I TIFF_SLONG +.br +.I TIFF_FLOAT +.br +.I TIFF_IFD +.br +.I TIFF_RATIONAL +.br +.I TIFF_SRATIONAL +.br +.I TIFF_DOUBLE +.br +.SH "RETURN VALUES" +.br +.IR TIFFDataWidth +returns a number of bytes occupied by the item of given type. 0 returned when +uknown data type supplied. +.SH "SEE ALSO" +.BR libtiff (3TIFF), +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFError.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFError.3tiff new file mode 100644 index 000000000..761ff08c4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFError.3tiff @@ -0,0 +1,69 @@ +.\" $Id: TIFFError.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFError 3TIFF "October 15, 1995" "libtiff" +.SH NAME +TIFFError, TIFFSetErrorHandler \- library error handling interface +.SH SYNOPSIS +.B "#include " +.sp +.BI "void TIFFError(const char *" module ", const char *" fmt ", " ... ")" +.sp +.B "#include " +.sp +.BI "typedef void (*TIFFErrorHandler)(const char *" module ", const char *" fmt ", va_list " ap ");" +.br +.B "TIFFErrorHandler TIFFSetErrorHandler(TIFFErrorHandler handler);" +.SH DESCRIPTION +.I TIFFError +invokes the library-wide error handling function to (normally) write an error +message to the +.BR stderr . +The +.I fmt +parameter is a +.IR printf (3S) +format string, and any number arguments can be supplied. The +.I module +parameter, if non-zero, is printed before the message; it typically is used to +identify the software module in which an error is detected. +.PP +Applications that desire to capture control in the event of an error should +use +.IR TIFFSetErrorHandler +to override the default error handler. +A +.SM NULL +(0) error handling function may be installed to suppress error messages. +.SH "RETURN VALUES" +.IR TIFFSetErrorHandler +returns a reference to the previous error handling function. +.SH "SEE ALSO" +.BR TIFFWarning (3TIFF), +.BR libtiff (3TIFF), +.BR printf (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFFieldDataType.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldDataType.3tiff new file mode 100644 index 000000000..3efe6974b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldDataType.3tiff @@ -0,0 +1,53 @@ +.\" $Id: TIFFFieldDataType.3tiff,v 1.1 2012-07-29 15:45:29 tgl Exp $ +.\" +.\" Copyright (c) 2012, Tom Lane +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFFieldDataType 3TIFF "July 26, 2012" "libtiff" +.SH NAME +TIFFFieldDataType \- Get TIFF data type from field information +.SH SYNOPSIS +.B "#include " +.sp +.BI "TIFFDataType TIFFFieldDataType(const TIFFField* " fip ")" +.SH DESCRIPTION +.BR TIFFFieldDataType +returns the data type stored in a TIFF field. +.P +.I fip +is a field information pointer previously returned by +.BR TIFFFindField , +.BR TIFFFieldWithTag , +or +.BR TIFFFieldWithName . +.br +.SH "RETURN VALUES" +.br +.BR TIFFFieldDataType +returns a member of the enum type +.BR TIFFDataType . +.br +.SH "SEE ALSO" +.BR libtiff (3TIFF), +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFFieldName.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldName.3tiff new file mode 100644 index 000000000..2755d1818 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldName.3tiff @@ -0,0 +1,52 @@ +.\" $Id: TIFFFieldName.3tiff,v 1.1 2012-07-29 15:45:29 tgl Exp $ +.\" +.\" Copyright (c) 2012, Tom Lane +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFFieldName 3TIFF "July 26, 2012" "libtiff" +.SH NAME +TIFFFieldName \- Get TIFF field name from field information +.SH SYNOPSIS +.B "#include " +.sp +.BI "const char* TIFFFieldName(const TIFFField* " fip ")" +.SH DESCRIPTION +.BR TIFFFieldName +returns the textual name for a TIFF field. +.P +.I fip +is a field information pointer previously returned by +.BR TIFFFindField , +.BR TIFFFieldWithTag , +or +.BR TIFFFieldWithName . +.br +.SH "RETURN VALUES" +.br +.BR TIFFFieldName +returns a constant C string. +.br +.SH "SEE ALSO" +.BR libtiff (3TIFF), +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFFieldPassCount.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldPassCount.3tiff new file mode 100644 index 000000000..8f3c5d0db --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldPassCount.3tiff @@ -0,0 +1,73 @@ +.\" $Id: TIFFFieldPassCount.3tiff,v 1.1 2012-07-29 15:45:29 tgl Exp $ +.\" +.\" Copyright (c) 2012, Tom Lane +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFFieldPassCount 3TIFF "July 26, 2012" "libtiff" +.SH NAME +TIFFFieldPassCount \- Get whether to pass a count to TIFFGet/SetField +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFFieldPassCount(const TIFFField* " fip ")" +.SH DESCRIPTION +.BR TIFFFieldPassCount +returns true (nonzero) if +.BR TIFFGetField +and +.BR TIFFSetField +expect a +.I count +value to be passed before the actual data pointer. +.P +.I fip +is a field information pointer previously returned by +.BR TIFFFindField , +.BR TIFFFieldWithTag , +or +.BR TIFFFieldWithName . +.P +When a +.I count +is required, it will be of type +.BR uint32 +when +.BR TIFFFieldReadCount +reports +.BR TIFF_VARIABLE2 , +and of type +.BR uint16 +otherwise. (This distinction is critical for use of +.BR TIFFGetField , +but normally not so for use of +.BR TIFFSetField .) +.br +.SH "RETURN VALUES" +.br +.BR TIFFFieldPassCount +returns an integer that is always 1 (true) or 0 (false). +.br +.SH "SEE ALSO" +.BR libtiff (3TIFF), +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFFieldReadCount.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldReadCount.3tiff new file mode 100644 index 000000000..cdb5858aa --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldReadCount.3tiff @@ -0,0 +1,77 @@ +.\" $Id: TIFFFieldReadCount.3tiff,v 1.1 2012-07-29 15:45:30 tgl Exp $ +.\" +.\" Copyright (c) 2012, Tom Lane +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFFieldReadCount 3TIFF "July 26, 2012" "libtiff" +.SH NAME +TIFFFieldReadCount \- Get number of values to be read from field +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFFieldReadCount(const TIFFField* " fip ")" +.SH DESCRIPTION +.BR TIFFFieldReadCount +returns the number of values available to be read from the specified +TIFF field; that is, the number of arguments that should be supplied to +.BR TIFFGetField . +For most field types this is a small positive integer, typically 1 or 2, +but there are some special values: +.br +.BR TIFF_VARIABLE +indicates that a variable number of values is possible; then, a +.BR uint16 +.I count +argument and a pointer +.I data +argument must be supplied to +.BR TIFFGetField . +.br +.BR TIFF_VARIABLE2 +is the same as +.BR TIFF_VARIABLE +except that the +.I count +argument must have type +.BR uint32 . +.br +.BR TIFF_SPP +indicates that the number of arguments is equal to the image's +number of samples per pixel. +.P +.I fip +is a field information pointer previously returned by +.BR TIFFFindField , +.BR TIFFFieldWithTag , +or +.BR TIFFFieldWithName . +.br +.SH "RETURN VALUES" +.br +.BR TIFFFieldReadCount +returns an integer. +.br +.SH "SEE ALSO" +.BR libtiff (3TIFF), +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFFieldTag.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldTag.3tiff new file mode 100644 index 000000000..bf8174e23 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldTag.3tiff @@ -0,0 +1,56 @@ +.\" $Id: TIFFFieldTag.3tiff,v 1.1 2012-07-29 15:45:30 tgl Exp $ +.\" +.\" Copyright (c) 2012, Tom Lane +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFFieldTag 3TIFF "July 26, 2012" "libtiff" +.SH NAME +TIFFFieldTag \- Get TIFF field tag value from field information +.SH SYNOPSIS +.B "#include " +.sp +.BI "uint32 TIFFFieldTag(const TIFFField* " fip ")" +.SH DESCRIPTION +.BR TIFFFieldTag +returns the numeric tag value for a TIFF field. +This can be compared to various constants exported by the +.BR libtiff +header files, such as +.BR TIFFTAG_IMAGEWIDTH . +.P +.I fip +is a field information pointer previously returned by +.BR TIFFFindField , +.BR TIFFFieldWithTag , +or +.BR TIFFFieldWithName . +.br +.SH "RETURN VALUES" +.br +.BR TIFFFieldTag +returns an integer tag value. +.br +.SH "SEE ALSO" +.BR libtiff (3TIFF), +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFFieldWriteCount.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldWriteCount.3tiff new file mode 100644 index 000000000..63305320d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFFieldWriteCount.3tiff @@ -0,0 +1,88 @@ +.\" $Id: TIFFFieldWriteCount.3tiff,v 1.1 2012-07-29 15:45:30 tgl Exp $ +.\" +.\" Copyright (c) 2012, Tom Lane +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFFieldWriteCount 3TIFF "July 26, 2012" "libtiff" +.SH NAME +TIFFFieldWriteCount \- Get number of values to be written to field +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFFieldWriteCount(const TIFFField* " fip ")" +.SH DESCRIPTION +.BR TIFFFieldWriteCount +returns the number of values to be written into the specified +TIFF field; that is, the number of arguments that should be supplied to +.BR TIFFSetField . +For most field types this is a small positive integer, typically 1 or 2, +but there are some special values: +.br +.BR TIFF_VARIABLE +indicates that a variable number of values is possible; then, a +.BR uint16 +.I count +argument and a pointer +.I data +argument must be supplied to +.BR TIFFSetField . +.br +.BR TIFF_VARIABLE2 +is the same as +.BR TIFF_VARIABLE +except that the +.I count +argument must have type +.BR uint32 . +(On most modern machines, this makes no practical difference, and the +.I count +argument can simply be an +.BR int +in either case.) +.br +.BR TIFF_SPP +indicates that the number of arguments must be equal to the image's +number of samples per pixel. +.P +.I fip +is a field information pointer previously returned by +.BR TIFFFindField , +.BR TIFFFieldWithTag , +or +.BR TIFFFieldWithName . +.P +For most field types, +.BR TIFFFieldWriteCount +returns the same value as +.BR TIFFFieldReadCount , +but there are some exceptions. +.br +.SH "RETURN VALUES" +.br +.BR TIFFFieldWriteCount +returns an integer. +.br +.SH "SEE ALSO" +.BR libtiff (3TIFF), +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFFlush.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFFlush.3tiff new file mode 100644 index 000000000..af3235036 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFFlush.3tiff @@ -0,0 +1,64 @@ +.\" $Id: TIFFFlush.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFFlush 3TIFF "December 16, 1991" "libtiff" +.SH NAME +TIFFFlush, TIFFFlushData \- flush pending writes to an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFFlush(TIFF *" tif ")" +.br +.BI "int TIFFFlushData(TIFF *" tif ")" +.SH DESCRIPTION +.IR TIFFFlush +causes any pending writes for the specified file (including writes for the +current directory) to be done. In normal operation this call is never needed \- +the library automatically does any flushing required. +.PP +.IR TIFFFlushData +flushes any pending image data for the specified file to be written out; +directory-related data are not flushed. In normal operation this call is never +needed \- the library automatically does any flushing required. +.SH "RETURN VALUES" +0 is returned if an error is encountered, otherwise 1 is returned. +.SH DIAGNOSTICS +All error messages are directed to the +.BR TIFFError (3TIFF) +routine. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFWriteEncodedStrip (3TIFF), +.BR TIFFWriteEncodedTile (3TIFF), +.BR TIFFWriteRawStrip (3TIFF), +.BR TIFFWriteRawTile (3TIFF), +.BR TIFFWriteScanline (3TIFF), +.BR TIFFWriteTile (3TIFF) +.BR libtiff (3TIFF), +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFGetField.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFGetField.3tiff new file mode 100644 index 000000000..0624ee9bf --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFGetField.3tiff @@ -0,0 +1,229 @@ +.\" $Id: TIFFGetField.3tiff,v 1.6 2012-05-19 23:15:22 bfriesen Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFGetField 3TIFF "March 18, 2005" "libtiff" +.SH NAME +TIFFGetField, TIFFVGetField \- get the value(s) of a tag in an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFGetField(TIFF *" tif ", ttag_t " tag ", " ... ")" +.sp +.B "#include " +.sp +.BI "int TIFFVGetField(TIFF *" tif ", ttag_t " tag ", va_list " ap ")" +.br +.BI "int TIFFGetFieldDefaulted(TIFF *" tif ", ttag_t " tag ", " ... ")" +.br +.BI "int TIFFVGetFieldDefaulted(TIFF *" tif ", ttag_t " tag ", va_list " ap ")" +.SH DESCRIPTION +.IR TIFFGetField +returns the value of a tag or pseudo-tag associated with the the current +directory of the opened +.SM TIFF +file +.IR tif . +(A +.I pseudo-tag +is a parameter that is used to control the operation of the +.SM TIFF +library but whose value is not read or written to the underlying file.) The +file must have been previously opened with +.IR TIFFOpen (3TIFF). +The tag is identified by +.IR tag , +one of the values defined in the include file +.B tiff.h +(see also the table below). The type and number of values returned is +dependent on the tag being requested. The programming interface uses a +variable argument list as prescribed by the +.IR stdarg (3) +interface. The returned values should only be interpreted if +.IR TIFFGetField +returns 1. +.PP +.IR TIFFVGetField +is functionally equivalent to +.IR TIFFGetField +except that it takes a pointer to a variable argument list. +.I TIFFVGetField +is useful for layering interfaces on top of the functionality provided by +.IR TIFFGetField . +.PP +.IR TIFFGetFieldDefaulted +and +.IR TIFFVGetFieldDefaulted +are identical to +.IR TIFFGetField +and +.IR TIFFVGetField , +except that if a tag is not defined in the current directory and it has a +default value, then the default value is returned. +.PP +The tags understood by +.IR libtiff(3TIFF), +the number of parameter values, and the types for the returned values are +shown below. The data types are specified as in C and correspond to the types +used to specify tag values to +.IR TIFFSetField (3TIFF). +Remember that +.IR TIFFGetField +returns parameter values, so all the listed data types are pointers to storage +where values should be returned. +Consult the +.SM TIFF +specification (or relevant industry specification) for information on the +meaning of each tag and their possible values. +.PP +.nf +.ta \w'TIFFTAG_CONSECUTIVEBADFAXLINES'u+2n +\w'Count'u+2n +\w'TIFFFaxFillFunc*'u+2n +\fITag Name\fP \fICount\fP \fITypes\fP \fINotes\fP +.sp 5p +TIFFTAG_ARTIST 1 char** +TIFFTAG_BADFAXLINES 1 uint32* +TIFFTAG_BITSPERSAMPLE 1 uint16* +TIFFTAG_CLEANFAXDATA 1 uint16* +TIFFTAG_COLORMAP 3 uint16** 1<" +.sp +.BI "TIFF* TIFFOpen(const char *" filename ", const char *" mode ")" +.br +.BI "TIFF* TIFFFdOpen(const int " fd ", const char *" filename ", const char *" mode ")" +.sp +.B "typedef tsize_t (*TIFFReadWriteProc)(thandle_t, tdata_t, tsize_t);" +.br +.B "typedef toff_t (*TIFFSeekProc)(thandle_t, toff_t, int);" +.br +.B "typedef int (*TIFFCloseProc)(thandle_t);" +.br +.B "typedef toff_t (*TIFFSizeProc)(thandle_t);" +.br +.B "typedef int (*TIFFMapFileProc)(thandle_t, tdata_t*, toff_t*);" +.br +.B "typedef void (*TIFFUnmapFileProc)(thandle_t, tdata_t, toff_t);" +.sp +.BI "TIFF* TIFFClientOpen(const char *" filename ", const char *" mode ", thandle_t " clientdata ", TIFFReadWriteProc " readproc ", TIFFReadWriteProc " writeproc ", TIFFSeekProc " seekproc ", TIFFCloseProc " closeproc ", TIFFSizeProc " sizeproc ", TIFFMapFileProc " mapproc ", TIFFUnmapFileProc " unmapproc ")" +.SH DESCRIPTION +.IR TIFFOpen +opens a +.SM TIFF +file whose name is +.I filename +and returns a handle to be used in subsequent calls to routines in +.IR libtiff . +If the open operation fails, then zero is returned. +The +.I mode +parameter specifies if the file is to be opened for reading (``r''), +writing (``w''), or appending (``a'') and, optionally, whether +to override certain default aspects of library operation (see below). +When a file is opened for appending, existing data will not +be touched; instead new data will be written as additional subfiles. +If an existing file is opened for writing, all previous data is +overwritten. +.PP +If a file is opened for reading, the first +.SM TIFF +directory in the file is automatically read +(also see +.IR TIFFSetDirectory (3TIFF) +for reading directories other than the first). +If a file is opened for writing or appending, a default directory +is automatically created for writing subsequent data. +This directory has all the default values specified in +.SM TIFF +Revision 6.0: +.IR BitsPerSample =1, +.IR ThreshHolding "=bilevel art scan," +.IR FillOrder =1 +(most significant bit of each data byte is filled first), +.IR Orientation =1 +(the 0th row represents the visual top of the image, and the 0th +column represents the visual left hand side), +.IR SamplesPerPixel =1, +.IR RowsPerStrip =infinity, +.IR ResolutionUnit =2 +(inches), and +.IR Compression =1 +(no compression). +To alter these values, or to define values for additional fields, +.IR TIFFSetField (3TIFF) +must be used. +.PP +.IR TIFFFdOpen +is like +.IR TIFFOpen +except that it opens a +.SM TIFF +file given an open file descriptor +.IR fd . +The file's name and mode must reflect that of the open descriptor. +The object associated with the file descriptor +.BR "must support random access" . +.PP +.IR TIFFClientOpen +is like +.IR TIFFOpen +except that the caller supplies a collection of functions that the +library will use to do \s-1UNIX\s+1-like I/O operations. +The +.I readproc +and +.I writeproc +are called to read and write data at the current file position. +.I seekproc +is called to change the current file position a la +.IR lseek (2). +.I closeproc +is invoked to release any resources associated with an open file. +.I sizeproc +is invoked to obtain the size in bytes of a file. +.I mapproc +and +.I unmapproc +are called to map and unmap a file's contents in memory; c.f. +.IR mmap (2) +and +.IR munmap (2). +The +.I clientdata +parameter is an opaque ``handle'' passed to the client-specified +routines passed as parameters to +.IR TIFFClientOpen . +.SH OPTIONS +The open mode parameter can include the following flags in +addition to the ``r'', ``w'', and ``a'' flags. +Note however that option flags must follow the read-write-append +specification. +.TP +.B l +When creating a new file force information be written with +Little-Endian byte order (but see below). +By default the library will create new files using the native +.SM CPU +byte order. +.TP +.B b +When creating a new file force information be written with +Big-Endian byte order (but see below). +By default the library will create new files using the native +.SM CPU +byte order. +.TP +.B L +Force image data that is read or written to be treated with +bits filled from Least Significant Bit (\s-1LSB\s+1) to +Most Significant Bit (\s-1MSB\s+1). +Note that this is the opposite to the way the library has +worked from its inception. +.TP +.B B +Force image data that is read or written to be treated with +bits filled from Most Significant Bit (\s-1MSB\s+1) to +Least Significant Bit (\s-1LSB\s+1); this is the default. +.TP +.B H +Force image data that is read or written to be treated with +bits filled in the same order as the native +.SM CPU. +.TP +.B M +Enable the use of memory-mapped files for images opened read-only. +If the underlying system does not support memory-mapped files +or if the specific image being opened cannot be memory-mapped +then the library will fallback to using the normal system interface +for reading information. +By default the library will attempt to use memory-mapped files. +.TP +.B m +Disable the use of memory-mapped files. +.TP +.B C +Enable the use of ``strip chopping'' when reading images +that are comprised of a single strip or tile of uncompressed data. +Strip chopping is a mechanism by which the library will automatically +convert the single-strip image to multiple strips, +each of which has about 8 Kilobytes of data. +This facility can be useful in reducing the amount of memory used +to read an image because the library normally reads each strip +in its entirety. +Strip chopping does however alter the apparent contents of the +image because when an image is divided into multiple strips it +looks as though the underlying file contains multiple separate +strips. +Finally, note that default handling of strip chopping is a compile-time +configuration parameter. +The default behaviour, for backwards compatibility, is to enable +strip chopping. +.TP +.B c +Disable the use of strip chopping when reading images. +.TP +.B h +Read TIFF header only, do not load the first image directory. That could be +useful in case of the broken first directory. We can open the file and proceed +to the other directories. +.SH "BYTE ORDER" +The +.SM TIFF +specification (\fBall versions\fP) states that compliant readers +.IR "must be capable of reading images written in either byte order" . +Nonetheless some software that claims to support the reading of +.SM TIFF +images is incapable of reading images in anything but the native +.SM CPU +byte order on which the software was written. +(Especially notorious +are applications written to run on Intel-based machines.) +By default the library will create new files with the native +byte-order of the +.SM CPU +on which the application is run. +This ensures optimal performance and is portable to any application +that conforms to the TIFF specification. +To force the library to use a specific byte-order when creating +a new file the ``b'' and ``l'' option flags may be included in +the call to open a file; for example, ``wb'' or ``wl''. +.SH "RETURN VALUES" +Upon successful completion +.IR TIFFOpen , +.IR TIFFFdOpen , +and +.IR TIFFClientOpen +return a +.SM TIFF +pointer. +Otherwise, NULL is returned. +.SH DIAGNOSTICS +All error messages are directed to the +.IR TIFFError (3TIFF) +routine. +Likewise, warning messages are directed to the +.IR TIFFWarning (3TIFF) +routine. +.PP +\fB"%s": Bad mode\fP. +The specified +.I mode +parameter was not one of ``r'' (read), ``w'' (write), or ``a'' (append). +.PP +.BR "%s: Cannot open" . +.IR TIFFOpen () +was unable to open the specified filename for read/writing. +.PP +.BR "Cannot read TIFF header" . +An error occurred while attempting to read the header information. +.PP +.BR "Error writing TIFF header" . +An error occurred while writing the default header information +for a new file. +.PP +.BR "Not a TIFF file, bad magic number %d (0x%x)" . +The magic number in the header was not (hex) +0x4d4d or (hex) 0x4949. +.PP +.BR "Not a TIFF file, bad version number %d (0x%x)" . +The version field in the header was not 42 (decimal). +.PP +.BR "Cannot append to file that has opposite byte ordering" . +A file with a byte ordering opposite to the native byte +ordering of the current machine was opened for appending (``a''). +This is a limitation of the library. +.SH "SEE ALSO" +.IR libtiff (3TIFF), +.IR TIFFClose (3TIFF) diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFPrintDirectory.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFPrintDirectory.3tiff new file mode 100644 index 000000000..437b09e2c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFPrintDirectory.3tiff @@ -0,0 +1,70 @@ +.\" $Id: TIFFPrintDirectory.3tiff,v 1.1 2004-11-11 14:39:16 dron Exp $ +.\" +.\" Copyright (c) 1991-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFPrintDirectory 3TIFF "December 12, 1991" "libtiff" +.SH NAME +TIFFPrintDirectory \- print a description of a +.SM TIFF +directory +.SH SYNOPSIS +.B "#include " +.sp +.BI "void TIFFPrintDirectory(TIFF *" tif ", FILE *" fd ", long " flags ")" +.SH DESCRIPTION +.I TIFFPrintDirectory +prints a description of the current directory in the specified +.SM TIFF +file to the standard I/O output stream +.IR fd . +The +.I flags +parameter is used to control the +.I "level of detail" +of the printed information; it is a bit-or of the flags defined in +.BR tiffio.h : +.sp .5 +.nf +.ta \w'#define 'u +\w'TIFFPRINT_JPEGDCTABLES 'u +\w'0x200 'u +#define TIFFPRINT_NONE 0x0 /* no extra info */ +#define TIFFPRINT_STRIPS 0x1 /* strips/tiles info */ +#define TIFFPRINT_CURVES 0x2 /* color/gray response curves */ +#define TIFFPRINT_COLORMAP 0x4 /* colormap */ +#define TIFFPRINT_JPEGQTABLES 0x100 /* JPEG Q matrices */ +#define TIFFPRINT_JPEGACTABLES 0x200 /* JPEG AC tables */ +#define TIFFPRINT_JPEGDCTABLES 0x200 /* JPEG DC tables */ +.fi +.SH NOTES +In C++ the +.I flags +parameter defaults to 0. +.SH "RETURN VALUES" +None. +.SH DIAGNOSTICS +None. +.SH "SEE ALSO" +.IR libtiff (3TIFF), +.IR TIFFOpen (3TIFF), +.IR TIFFReadDirectory (3TIFF), +.IR TIFFSetDirectory (3TIFF) diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFRGBAImage.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFRGBAImage.3tiff new file mode 100644 index 000000000..ef1a85cb4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFRGBAImage.3tiff @@ -0,0 +1,286 @@ +.\" $Id: TIFFRGBAImage.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1991-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFRGBAImage 3TIFF "October 29, 2004" "libtiff" +.SH NAME +TIFFRGBAImageOK, TIFFRGBAImageBegin, TIFFRGBAImageGet, TIFFRGBAImageEnd +\- read and decode an image into a raster +.SH SYNOPSIS +.B "#include " +.sp +.B "typedef unsigned char TIFFRGBValue;" +.B "typedef struct _TIFFRGBAImage TIFFRGBAImage;" +.sp +.BI "int TIFFRGBAImageOK(TIFF *" tif ", char " emsg[1024] ")" +.br +.BI "int TIFFRGBAImageBegin(TIFFRGBAImage *" img ", TIFF* " tif ", int " stopOnError ", char " emsg[1024] ")" +.br +.BI "int TIFFRGBAImageGet(TIFFRGBAImage *" img ", uint32* " raster ", uint32 " width " , uint32 " height ")" +.br +.BI "void TIFFRGBAImageEnd(TIFFRGBAImage *" img ")" +.br +.SH DESCRIPTION +The routines described here provide a high-level interface +through which +.SM TIFF +images may be read into memory. +Images may be strip- or tile-based and have a variety of different +characteristics: bits/sample, samples/pixel, photometric, etc. +Decoding state is encapsulated in a +.I TIFFRGBAImage +structure making it possible to capture state for multiple images +and quickly switch between them. +The target raster format can be customized to a particular application's +needs by installing custom routines that manipulate image data +according to application requirements. +.PP +The default usage for these routines is: check if an image can +be processed using +.IR TIFFRGBAImageOK , +construct a decoder state block using +.IR TIFFRGBAImageBegin , +read and decode an image into a target raster using +.IR TIFFRGBAImageGet , +and then +release resources using +.IR TIFFRGBAImageEnd . +.I TIFFRGBAImageGet +can be called multiple times to decode an image using different +state parameters. +If multiple images are to be displayed and there is not enough +space for each of the decoded rasters, multiple state blocks can +be managed and then calls can be made to +.I TIFFRGBAImageGet +as needed to display an image. +.PP +The generated raster is assumed to be an array of +.I width +times +.I height +32-bit entries, where +.I width +must be less than or equal to the width of the image (\c +.I height +may be any non-zero size). +If the raster dimensions are smaller than the image, the image data +is cropped to the raster bounds. +If the raster height is greater than that of the image, then the +image data are placed in the lower part of the raster. +(Note that the raster is assume to be organized such that the pixel +at location (\fIx\fP,\fIy\fP) is \fIraster\fP[\fIy\fP*\fIwidth\fP+\fIx\fP]; +with the raster origin in the +.B lower-left +hand corner.) +.PP +Raster pixels are 8-bit packed red, green, blue, alpha samples. +The macros +.IR TIFFGetR , +.IR TIFFGetG , +.IR TIFFGetB , +and +.I TIFFGetA +should be used to access individual samples. +Images without Associated Alpha matting information have a constant +Alpha of 1.0 (255). +.PP +.I TIFFRGBAImageGet +converts non-8-bit images by scaling sample values. +Palette, grayscale, bilevel, +.SM CMYK\c +, and YCbCr images are converted to +.SM RGB +transparently. +Raster pixels are returned uncorrected by any colorimetry information +present in the directory. +.PP +The parameter +.I stopOnError +specifies how to act if an error is encountered while reading +the image. +If +.I stopOnError +is non-zero, then an error will terminate the operation; otherwise +.I TIFFRGBAImageGet +will continue processing data until all the possible data in the +image have been requested. +.SH "ALTERNATE RASTER FORMATS" +To use the core support for reading and processing +.SM TIFF +images, but write the resulting raster data in a different format +one need only override the ``\fIput methods\fP'' used to store raster data. +These methods are are defined in the +.I TIFFRGBAImage +structure and initially setup by +.I TIFFRGBAImageBegin +to point to routines that pack raster data in the default +.SM ABGR +pixel format. +Two different routines are used according to the physical organization +of the image data in the file: +.IR PlanarConfiguration =1 +(packed samples), +and +.IR PlanarConfiguration =2 +(separated samples). +Note that this mechanism can be used to transform the data before +storing it in the raster. +For example one can convert data +to colormap indices for display on a colormap display. +.SH "SIMULTANEOUS RASTER STORE AND DISPLAY" +It is simple to display an image as it is being read into memory +by overriding the put methods as described above for supporting +alternate raster formats. +Simply keep a reference to the default put methods setup by +.I TIFFRGBAImageBegin +and then invoke them before or after each display operation. +For example, the +.IR tiffgt (1) +utility uses the following put method to update the display as +the raster is being filled: +.sp +.nf +.ft C +static void +putContigAndDraw(TIFFRGBAImage* img, uint32* raster, + uint32 x, uint32 y, uint32 w, uint32 h, + int32 fromskew, int32 toskew, + unsigned char* cp) +{ + (*putContig)(img, raster, x, y, w, h, fromskew, toskew, cp); + if (x+w == width) { + w = width; + if (img->orientation == ORIENTATION_TOPLEFT) + lrectwrite(0, y-(h-1), w-1, y, raster-x-(h-1)*w); + else + lrectwrite(0, y, w-1, y+h-1, raster); + } +} +.ft R +.fi +.sp +(the original routine provided by the library is saved in the +variable +.IR putContig .) +.SH "SUPPORTING ADDITIONAL TIFF FORMATS" +The +.I TIFFRGBAImage +routines support the most commonly encountered flavors of +.SM TIFF. +It is possible to extend this support by overriding the ``\fIget method\fP'' +invoked by +.I TIFFRGBAImageGet +to read +.SM TIFF +image data. +Details of doing this are a bit involved, it is best to make a copy +of an existing get method and modify it to suit the needs of an +application. +.SH NOTES +Samples must be either 1, 2, 4, 8, or 16 bits. +Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. +.I SamplesPerPixel +minus +.IR ExtraSamples ). +.PP +Palette image colormaps that appear to be incorrectly written +as 8-bit values are automatically scaled to 16-bits. +.SH "RETURN VALUES" +All routines return +1 if the operation was successful. +Otherwise, 0 is returned if an error was encountered and +.I stopOnError +is zero. +.SH DIAGNOSTICS +All error messages are directed to the +.IR TIFFError (3TIFF) +routine. +.PP +.BR "Sorry, can not handle %d-bit pictures" . +The image had +.I BitsPerSample +other than 1, 2, 4, 8, or 16. +.PP +.BR "Sorry, can not handle %d-channel images" . +The image had +.I SamplesPerPixel +other than 1, 3, or 4. +.PP +\fBMissing needed "PhotometricInterpretation" tag\fP. +The image did not have a tag that describes how to display +the data. +.PP +\fBNo "PhotometricInterpretation" tag, assuming RGB\fP. +The image was missing a tag that describes how to display it, +but because it has 3 or 4 samples/pixel, it is assumed to be +.SM RGB. +.PP +\fBNo "PhotometricInterpretation" tag, assuming min-is-black\fP. +The image was missing a tag that describes how to display it, +but because it has 1 sample/pixel, it is assumed to be a grayscale +or bilevel image. +.PP +.BR "No space for photometric conversion table" . +There was insufficient memory for a table used to convert +image samples to 8-bit +.SM RGB. +.PP +\fBMissing required "Colormap" tag\fP. +A Palette image did not have a required +.I Colormap +tag. +.PP +.BR "No space for tile buffer" . +There was insufficient memory to allocate an i/o buffer. +.PP +.BR "No space for strip buffer" . +There was insufficient memory to allocate an i/o buffer. +.PP +.BR "Can not handle format" . +The image has a format (combination of +.IR BitsPerSample , +.IR SamplesPerPixel , +and +.IR PhotometricInterpretation ) +that can not be handled. +.PP +.BR "No space for B&W mapping table" . +There was insufficient memory to allocate a table used to map +grayscale data to +.SM RGB. +.PP +.BR "No space for Palette mapping table" . +There was insufficient memory to allocate a table used to map +data to 8-bit +.SM RGB. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFReadRGBAImage (3TIFF), +.BR TIFFReadRGBAImageOriented (3TIFF), +.BR TIFFReadRGBAStrip (3TIFF), +.BR TIFFReadRGBATile (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFReadDirectory.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFReadDirectory.3tiff new file mode 100644 index 000000000..000bf0ae0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFReadDirectory.3tiff @@ -0,0 +1,164 @@ +.\" $Id: TIFFReadDirectory.3tiff,v 1.3 2010-12-12 01:45:35 faxguy Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFReadDirectory 3TIFF "October 15, 1995" "libtiff" +.SH NAME +TIFFReadDirectory \- get the contents of the next directory in an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFReadDirectory(TIFF *" tif ")" +.SH DESCRIPTION +Read the next directory in the specified file and make it the current +directory. Applications only need to call +.I TIFFReadDirectory +to read multiple subfiles in a single +.SM TIFF +file\(em +the first directory in a file is automatically read when +.IR TIFFOpen +is called. +.SH NOTES +If the library is compiled with +.SM STRIPCHOP_SUPPORT +enabled, then images that have a single uncompressed strip or tile of data are +automatically treated as if they were made up of multiple strips or tiles of +approximately 8 kilobytes each. This operation is done only in-memory; it does +not alter the contents of the file. However, the construction of the ``chopped +strips'' is visible to the application through the number of strips [tiles] +returned by +.I TIFFNumberOfStrips +[\c +.IR TIFFNumberOfTiles ]. +.SH "RETURN VALUES" +If the next directory was successfully read, 1 is returned. Otherwise, 0 is +returned if an error was encountered, or if there are no more directories to +be read. +.SH DIAGNOSTICS +All error messages are directed to the +.IR TIFFError (3TIFF) +routine. +All warning messages are directed to the +.IR TIFFWarning (3TIFF) +routine. +.PP +\fBSeek error accessing TIFF directory\fP. +An error occurred while positioning to the location of the +directory. +.PP +\fBWrong data type %d for field "%s"\fP. +The tag entry in the directory had an incorrect data type. +For example, an +.I ImageDescription +tag with a +.SM SHORT +data type. +.PP +\fBTIFF directory is missing required "%s" field\fP. +The specified tag is required to be present by the +.SM TIFF +5.0 specification, but is missing. +The directory is (usually) unusable. +.PP +\fB%s: Rational with zero denominator\fP. +A directory tag has a +.SM RATIONAL +value whose denominator is zero. +.PP +\fBIncorrect count %d for field "%s" (%lu, expecting %lu); tag ignored\fP. +The specified tag's count field is bad. +For example, a count other than 1 for a +.I SubFileType +tag. +.PP +\fBCannot handle different per-sample values for field "%s"\fP. +The tag has +.I SamplesPerPixel +values and they are not all the same; e.g. +.IR BitsPerSample . +The library is unable to handle images of this sort. +.PP +\fBCount mismatch for field "%s"; expecting %d, got %d\fP. +The count field in a +tag does not agree with the number expected by the library. +This should never happen, so if it does, the library refuses to +read the directory. +.PP +\fBInvalid TIFF directory; tags are not sorted in ascending order\fP. +The directory tags are not properly sorted as specified +in the +.SM TIFF +5.0 specification. +This error is not fatal. +.PP +\fBIgnoring unknown field with tag %d (0x%x)\fP. +An unknown tag was encountered in the directory; +the library ignores all such tags. +.PP +\fBTIFF directory is missing required "ImageLength" field\fP. +The image violates the specification by not having a necessary field. +There is no way for the library to recover from this error. +.PP +\fBTIFF directory is missing required "PlanarConfig" field\fP. +The image violates the specification by not having a necessary field. +There is no way for the library to recover from this error. +.PP +\fBTIFF directory is missing required "StripOffsets" field\fP. +The image has multiple strips, but is missing the tag that +specifies the file offset to each strip of data. +There is no way for the library to recover from this error. +.PP +\fBTIFF directory is missing required "TileOffsets" field\fP. +The image has multiple tiles, but is missing the tag that +specifies the file offset to each tile of data. +There is no way for the library to recover from this error. +.PP +\fBTIFF directory is missing required "StripByteCounts" field\fP. +The image has multiple strips, but is missing the tag that +specifies the size of each strip of data. +There is no way for the library to recover from this error. +.PP +\fBTIFF directory is missing required "StripByteCounts" field, calculating from imagelength\fP. +The image violates the specification by not having a necessary field. +However, when the image is comprised of only one strip or tile, the +library will estimate the missing value based on the file size. +.PP +\fBBogus "StripByteCounts" field, ignoring and calculating from imagelength\fP. +Certain vendors violate the specification by writing zero for +the StripByteCounts tag when they want to leave the value +unspecified. +If the image has a single strip, the library will estimate +the missing value based on the file size. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFWriteDirectory (3TIFF), +.BR TIFFSetDirectory (3TIFF), +.BR TIFFSetSubDirectory (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFReadEncodedStrip.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFReadEncodedStrip.3tiff new file mode 100644 index 000000000..d2d7b6746 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFReadEncodedStrip.3tiff @@ -0,0 +1,78 @@ +.\" $Id: TIFFReadEncodedStrip.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFReadEncodedStrip 3TIFF "October 15, 1995" "libtiff" +.SH NAME +TIFFReadEncodedStrip \- read and decode a strip of data from an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "tsize_t TIFFReadEncodedStrip(TIFF *" tif ", tstrip_t " strip ", tdata_t " buf ", tsize_t " size ")" +.SH DESCRIPTION +Read the specified strip of data and place up to +.I size +bytes of decompressed information in the (user supplied) data buffer. +.SH NOTES +The value of +.I strip +is a ``raw strip number.'' +That is, the caller must take into account whether or not the data are +organized in separate planes (\c +.IR PlanarConfiguration =2). +To read a full strip of data the data buffer should typically be at least as +large as the number returned by +.BR TIFFStripSize (3TIFF). +If the -1 passed in +.I size +parameter, the whole strip will be read. You should be sure you have enough +space allocated for the buffer. +.PP +The library attempts to hide bit- and byte-ordering differences between the +image and the native machine by converting data to the native machine order. +Bit reversal is done if the +.I FillOrder +tag is opposite to the native machine bit order. 16- and 32-bit samples are +automatically byte-swapped if the file was written with a byte order opposite +to the native machine byte order, +.SH "RETURN VALUES" +The actual number of bytes of data that were placed in +.I buf +is returned; +.IR TIFFReadEncodedStrip +returns \-1 if an error was encountered. +.SH DIAGNOSTICS +All error messages are directed to the +.BR TIFFError (3TIFF) +routine. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFReadRawStrip (3TIFF), +.BR TIFFReadScanline (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFReadEncodedTile.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFReadEncodedTile.3tiff new file mode 100644 index 000000000..5f6d90089 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFReadEncodedTile.3tiff @@ -0,0 +1,76 @@ +.\" $Id: TIFFReadEncodedTile.3tiff,v 1.3 2006-10-13 07:22:01 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFReadEncodedTile 3TIFF "October 13, 2006" "libtiff" +.SH NAME +TIFFReadEncodedTile \- read and decode a tile of data from an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFReadEncodedTile(TIFF *" tif ", ttile_t " tile ", tdata_t " buf ", tsize_t " size ")" +.SH DESCRIPTION +Read the specified tile of data and place up to +.I size +bytes of decompressed information in the (user supplied) data buffer. +.SH NOTES +The value of +.I tile +is a ``raw tile number.'' +That is, the caller must take into account whether or not the data are +organized in separate planes (\c +.IR PlanarConfiguration =2). +.IR TIFFComputeTile +automatically does this when converting an (x,y,z,sample) coordinate quadruple +to a tile number. To read a full tile of data the data buffer should be at +least as large as the value returned by +.IR TIFFTileSize . +.PP +The library attempts to hide bit- and byte-ordering differences between the +image and the native machine by converting data to the native machine order. +Bit reversal is done if the +.I FillOrder +tag is opposite to the native machine bit order. 16- and 32-bit samples are +automatically byte-swapped if the file was written with a byte order opposite +to the native machine byte order, +.SH "RETURN VALUES" +The actual number of bytes of data that were placed in +.I buf +is returned; +.IR TIFFReadEncodedTile +returns \-1 if an error was encountered. +.SH DIAGNOSTICS +All error messages are directed to the +.BR TIFFError (3TIFF) +routine. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFReadRawTile (3TIFF), +.BR TIFFReadTile (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBAImage.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBAImage.3tiff new file mode 100644 index 000000000..5d43ce396 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBAImage.3tiff @@ -0,0 +1,218 @@ +.\" $Id: TIFFReadRGBAImage.3tiff,v 1.4 2006-10-13 07:22:01 dron Exp $ +.\" +.\" Copyright (c) 1991-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFReadRGBAImage 3TIFF "October 13, 2006" "libtiff" +.SH NAME +TIFFReadRGBAImage, TIFFReadRGBAImageOriented \- read and decode an image +into a fixed-format raster +.SH SYNOPSIS +.B "#include " +.sp +.B "#define TIFFGetR(abgr) ((abgr) & 0xff)" +.br +.B "#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff)" +.br +.B "#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff)" +.br +.B "#define TIFFGetA(abgr) (((abgr) >> 24) & 0xff)" +.sp +.BI "int TIFFReadRGBAImage(TIFF *" tif ", uint32 " width ", uint32 " height ", uint32 *" raster ", int " stopOnError ")" +.br +.BI "int TIFFReadRGBAImageOriented(TIFF *" tif ", uint32 " width ", uint32 " height ", uint32 *" raster ", int " orientation ", int " stopOnError ")" +.br +.SH DESCRIPTION +.IR TIFFReadRGBAImage +reads a strip- or tile-based image into memory, storing the +result in the user supplied +.IR raster . +The raster is assumed to be an array of +.I width +times +.I height +32-bit entries, where +.I width +must be less than or equal to the width of the image (\c +.I height +may be any non-zero size). +If the raster dimensions are smaller than the image, the image data +is cropped to the raster bounds. +If the raster height is greater than that of the image, then the +image data are placed in the lower part of the raster. +(Note that the raster is assume to be organized such that the pixel +at location (\fIx\fP,\fIy\fP) is \fIraster\fP[\fIy\fP*\fIwidth\fP+\fIx\fP]; +with the raster origin in the lower-left hand corner.) +.PP +.IR TIFFReadRGBAImageOriented +works like +.IR TIFFReadRGBAImage +with except of that user can specify the raster origin position with the +.I orientation +parameter. Four orientations supported: +.TP +.B ORIENTATION_TOPLEFT +origin in top-left corner, +.TP +.B ORIENTATION_TOPRIGHT +origin in top-right corner, +.TP +.B ORIENTATION_BOTLEFT +origin in bottom-left corner +and +.TP +.B ORIENTATION_BOTRIGHT +origin in bottom-right corner. +.LP +If you choose +.B ORIENTATION_BOTLEFT +result will be the same as returned by the +.IR TIFFReadRGBAImage. +.PP +Raster pixels are 8-bit packed red, green, blue, alpha samples. +The macros +.IR TIFFGetR , +.IR TIFFGetG , +.IR TIFFGetB , +and +.I TIFFGetA +should be used to access individual samples. +Images without Associated Alpha matting information have a constant +Alpha of 1.0 (255). +.PP +.I TIFFReadRGBAImage +converts non-8-bit images by scaling sample values. +Palette, grayscale, bilevel, +.SM CMYK\c +, and YCbCr images are converted to +.SM RGB +transparently. +Raster pixels are returned uncorrected by any colorimetry information +present in the directory. +.PP +The paramater +.I stopOnError +specifies how to act if an error is encountered while reading +the image. +If +.I stopOnError +is non-zero, then an error will terminate the operation; otherwise +.I TIFFReadRGBAImage +will continue processing data until all the possible data in the +image have been requested. +.SH NOTES +In C++ the +.I stopOnError +parameter defaults to 0. +.PP +Samples must be either 1, 2, 4, 8, or 16 bits. +Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. +.I SamplesPerPixel +minus +.IR ExtraSamples ). +.PP +Palettte image colormaps that appear to be incorrectly written +as 8-bit values are automatically scaled to 16-bits. +.PP +.I TIFFReadRGBAImage +is just a wrapper around the more general +.IR TIFFRGBAImage (3TIFF) +facilities. +.SH "RETURN VALUES" +1 is returned if the image was successfully read and converted. +Otherwise, 0 is returned if an error was encountered and +.I stopOnError +is zero. +.SH DIAGNOSTICS +All error messages are directed to the +.IR TIFFError (3TIFF) +routine. +.PP +.BR "Sorry, can not handle %d-bit pictures" . +The image had +.I BitsPerSample +other than 1, 2, 4, 8, or 16. +.PP +.BR "Sorry, can not handle %d-channel images" . +The image had +.I SamplesPerPixel +other than 1, 3, or 4. +.PP +\fBMissing needed "PhotometricInterpretation" tag\fP. +The image did not have a tag that describes how to display +the data. +.PP +\fBNo "PhotometricInterpretation" tag, assuming RGB\fP. +The image was missing a tag that describes how to display it, +but because it has 3 or 4 samples/pixel, it is assumed to be +.SM RGB. +.PP +\fBNo "PhotometricInterpretation" tag, assuming min-is-black\fP. +The image was missing a tag that describes how to display it, +but because it has 1 sample/pixel, it is assumed to be a grayscale +or bilevel image. +.PP +.BR "No space for photometric conversion table" . +There was insufficient memory for a table used to convert +image samples to 8-bit +.SM RGB. +.PP +\fBMissing required "Colormap" tag\fP. +A Palette image did not have a required +.I Colormap +tag. +.PP +.BR "No space for tile buffer" . +There was insufficient memory to allocate an i/o buffer. +.PP +.BR "No space for strip buffer" . +There was insufficient memory to allocate an i/o buffer. +.PP +.BR "Can not handle format" . +The image has a format (combination of +.IR BitsPerSample , +.IR SamplesPerPixel , +and +.IR PhotometricInterpretation ) +that +.I TIFFReadRGBAImage +can not handle. +.PP +.BR "No space for B&W mapping table" . +There was insufficient memory to allocate a table used to map +grayscale data to +.SM RGB. +.PP +.BR "No space for Palette mapping table" . +There was insufficient memory to allocate a table used to map +data to 8-bit +.SM RGB. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFRGBAImage (3TIFF), +.BR TIFFReadRGBAStrip (3TIFF), +.BR TIFFReadRGBATile (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBAStrip.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBAStrip.3tiff new file mode 100644 index 000000000..a8bb18995 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBAStrip.3tiff @@ -0,0 +1,170 @@ +.\" $Id: TIFFReadRGBAStrip.3tiff,v 1.3 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1991-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFReadRGBAStrip 3TIFF "December 10, 1998" "libtiff" +.SH NAME +TIFFReadRGBAStrip \- read and decode an image strip into a fixed-format raster +.SH SYNOPSIS +.B "#include " +.sp +.B "#define TIFFGetR(abgr) ((abgr) & 0xff)" +.br +.B "#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff)" +.br +.B "#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff)" +.br +.B "#define TIFFGetA(abgr) (((abgr) >> 24) & 0xff)" +.sp +.BI "int TIFFReadRGBAStrip(TIFF *" tif ", uint32 " row ", uint32 *" raster ")" +.SH DESCRIPTION +.IR TIFFReadRGBAStrip +reads a single strip of a strip-based image into memory, storing the result in +the user supplied RGBA +.IR raster . +The raster is assumed to be an array of width times rowsperstrip 32-bit +entries, where width is the width of the image (TIFFTAG_IMAGEWIDTH) and +rowsperstrip is the maximum lines in a strip (TIFFTAG_ROWSPERSTRIP). + +.PP +The +.IR row +value should be the row of the first row in the strip (strip * rowsperstrip, +zero based). + +.PP +Note that the raster is assume to be organized such that the pixel at location +(\fIx\fP,\fIy\fP) is \fIraster\fP[\fIy\fP*\fIwidth\fP+\fIx\fP]; with the +raster origin in the +.I lower-left hand corner +of the strip. That is bottom to top organization. When reading a partial last +strip in the file the last line of the image will begin at the beginning of +the buffer. + +.PP +Raster pixels are 8-bit packed red, green, blue, alpha samples. The macros +.IR TIFFGetR , +.IR TIFFGetG , +.IR TIFFGetB , +and +.I TIFFGetA +should be used to access individual samples. Images without Associated Alpha +matting information have a constant Alpha of 1.0 (255). +.PP +See the +.IR TIFFRGBAImage (3TIFF) +page for more details on how various image types are converted to RGBA values. +.SH NOTES +Samples must be either 1, 2, 4, 8, or 16 bits. Colorimetric samples/pixel must +be either 1, 3, or 4 (i.e. +.I SamplesPerPixel +minus +.IR ExtraSamples ). +.PP +Palette image colormaps that appear to be incorrectly written as 8-bit values +are automatically scaled to 16-bits. +.PP +.I TIFFReadRGBAStrip +is just a wrapper around the more general +.IR TIFFRGBAImage (3TIFF) +facilities. It's main advantage over the similar +.IR TIFFReadRGBAImage() +function is that for large images a single buffer capable of holding the whole +image doesn't need to be allocated, only enough for one strip. The +.IR TIFFReadRGBATile() +function does a similar operation for tiled images. +.SH "RETURN VALUES" +1 is returned if the image was successfully read and converted. +Otherwise, 0 is returned if an error was encountered. +.SH DIAGNOSTICS +All error messages are directed to the +.IR TIFFError (3TIFF) +routine. +.PP +.BR "Sorry, can not handle %d-bit pictures" . +The image had +.I BitsPerSample +other than 1, 2, 4, 8, or 16. +.PP +.BR "Sorry, can not handle %d-channel images" . +The image had +.I SamplesPerPixel +other than 1, 3, or 4. +.PP +\fBMissing needed "PhotometricInterpretation" tag\fP. +The image did not have a tag that describes how to display the data. +.PP +\fBNo "PhotometricInterpretation" tag, assuming RGB\fP. +The image was missing a tag that describes how to display it, but because it +has 3 or 4 samples/pixel, it is assumed to be +.SM RGB. +.PP +\fBNo "PhotometricInterpretation" tag, assuming min-is-black\fP. The image was +missing a tag that describes how to display it, but because it has 1 +sample/pixel, it is assumed to be a grayscale or bilevel image. +.PP +.BR "No space for photometric conversion table" . +There was insufficient memory for a table used to convert image samples to +8-bit +.SM RGB. +.PP +\fBMissing required "Colormap" tag\fP. +A Palette image did not have a required +.I Colormap +tag. +.PP +.BR "No space for tile buffer" . +There was insufficient memory to allocate an i/o buffer. +.PP +.BR "No space for strip buffer" . +There was insufficient memory to allocate an i/o buffer. +.PP +.BR "Can not handle format" . +The image has a format (combination of +.IR BitsPerSample , +.IR SamplesPerPixel , +and +.IR PhotometricInterpretation ) +that +.I TIFFReadRGBAImage +can not handle. +.PP +.BR "No space for B&W mapping table" . +There was insufficient memory to allocate a table used to map grayscale data +to +.SM RGB. +.PP +.BR "No space for Palette mapping table" . +There was insufficient memory to allocate a table used to map data to 8-bit +.SM RGB. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFRGBAImage (3TIFF), +.BR TIFFReadRGBAImage (3TIFF), +.BR TIFFReadRGBATile (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ + diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBATile.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBATile.3tiff new file mode 100644 index 000000000..dfae1a9a2 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFReadRGBATile.3tiff @@ -0,0 +1,171 @@ +.\" $Id: TIFFReadRGBATile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1991-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFReadRGBATile 3TIFF "December 10, 1998" "libtiff" +.SH NAME +TIFFReadRGBATile \- read and decode an image tile into a fixed-format raster +.SH SYNOPSIS +.B "#include " +.sp +.B "#define TIFFGetR(abgr) ((abgr) & 0xff)" +.br +.B "#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff)" +.br +.B "#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff)" +.br +.B "#define TIFFGetA(abgr) (((abgr) >> 24) & 0xff)" +.sp +.BI "int TIFFReadRGBATile(TIFF *" tif ", uint32 " x ", uint32 " y ", uint32 *" raster ")" +.SH DESCRIPTION +.IR TIFFReadRGBATile +reads a single tile of a tile-based image into memory, storing the result in +the user supplied RGBA +.IR raster . +The raster is assumed to be an array of width times length 32-bit entries, +where width is the width of a tile (TIFFTAG_TILEWIDTH) and length is the +height of a tile (TIFFTAG_TILELENGTH). + +.PP +The +.IR x +and +.IR y +values are the offsets from the top left corner to the top left corner of the +tile to be read. They must be an exact multiple of the tile width and length. + +.PP +Note that the raster is assume to be organized such that the pixel at location +(\fIx\fP,\fIy\fP) is \fIraster\fP[\fIy\fP*\fIwidth\fP+\fIx\fP]; with the +raster origin in the +.I lower-left hand corner +of the tile. That is bottom to top organization. Edge tiles which partly fall +off the image will be filled out with appropriate zeroed areas. + +.PP +Raster pixels are 8-bit packed red, green, blue, alpha samples. The macros +.IR TIFFGetR , +.IR TIFFGetG , +.IR TIFFGetB , +and +.I TIFFGetA +should be used to access individual samples. Images without Associated Alpha +matting information have a constant Alpha of 1.0 (255). +.PP +See the +.IR TIFFRGBAImage (3TIFF) +page for more details on how various image types are converted to RGBA values. +.SH NOTES +Samples must be either 1, 2, 4, 8, or 16 bits. Colorimetric samples/pixel must +be either 1, 3, or 4 (i.e. +.I SamplesPerPixel +minus +.IR ExtraSamples ). +.PP +Palette image colormaps that appear to be incorrectly written as 8-bit values +are automatically scaled to 16-bits. +.PP +.I TIFFReadRGBATile +is just a wrapper around the more general +.IR TIFFRGBAImage (3TIFF) +facilities. It's main advantage over the similar +.IR TIFFReadRGBAImage() +function is that for large images a single buffer capable of holding the whole +image doesn't need to be allocated, only enough for one tile. The +.IR TIFFReadRGBAStrip() +function does a similar operation for stripped images. +.SH "RETURN VALUES" +1 is returned if the image was successfully read and converted. +Otherwise, 0 is returned if an error was encountered. +.SH DIAGNOSTICS +All error messages are directed to the +.IR TIFFError (3TIFF) +routine. +.PP +.BR "Sorry, can not handle %d-bit pictures" . +The image had +.I BitsPerSample +other than 1, 2, 4, 8, or 16. +.PP +.BR "Sorry, can not handle %d-channel images" . +The image had +.I SamplesPerPixel +other than 1, 3, or 4. +.PP +\fBMissing needed "PhotometricInterpretation" tag\fP. +The image did not have a tag that describes how to display the data. +.PP +\fBNo "PhotometricInterpretation" tag, assuming RGB\fP. +The image was missing a tag that describes how to display it, but because it +has 3 or 4 samples/pixel, it is assumed to be +.SM RGB. +.PP +\fBNo "PhotometricInterpretation" tag, assuming min-is-black\fP. +The image was missing a tag that describes how to display it, +but because it has 1 sample/pixel, it is assumed to be a grayscale +or bilevel image. +.PP +.BR "No space for photometric conversion table" . +There was insufficient memory for a table used to convert +image samples to 8-bit +.SM RGB. +.PP +\fBMissing required "Colormap" tag\fP. +A Palette image did not have a required +.I Colormap +tag. +.PP +.BR "No space for tile buffer" . +There was insufficient memory to allocate an i/o buffer. +.PP +.BR "No space for strip buffer" . +There was insufficient memory to allocate an i/o buffer. +.PP +.BR "Can not handle format" . +The image has a format (combination of +.IR BitsPerSample , +.IR SamplesPerPixel , +and +.IR PhotometricInterpretation ) +that +.I TIFFReadRGBAImage +can not handle. +.PP +.BR "No space for B&W mapping table" . +There was insufficient memory to allocate a table used to map +grayscale data to +.SM RGB. +.PP +.BR "No space for Palette mapping table" . +There was insufficient memory to allocate a table used to map data to 8-bit +.SM RGB. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFRGBAImage (3TIFF), +.BR TIFFReadRGBAImage (3TIFF), +.BR TIFFReadRGBAStrip (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFReadRawStrip.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFReadRawStrip.3tiff new file mode 100644 index 000000000..1f2d1d1eb --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFReadRawStrip.3tiff @@ -0,0 +1,64 @@ +.\" $Id: TIFFReadRawStrip.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFReadRawStrip 3TIFF "October 15, 1995" "libtiff" +.SH NAME +TIFFReadRawStrip \- return the undecoded contents of a strip of data from an +open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "tsize_t TIFFReadRawStrip(TIFF *" tif ", tstrip_t " strip ", tdata_t " buf ", tsize_t " size ")" +.SH DESCRIPTION +Read the contents of the specified strip into the (user supplied) data buffer. +Note that the value of +.I strip +is a ``raw strip number.'' That is, the caller must take into account whether +or not the data is organized in separate planes (\c +.IR PlanarConfiguration =2). +To read a full strip of data the data buffer should typically be at least as +large as the number returned by +.IR TIFFStripSize . +.SH "RETURN VALUES" +The actual number of bytes of data that were placed in +.I buf +is returned; +.IR TIFFReadEncodedStrip +returns \-1 if an error was encountered. +.SH DIAGNOSTICS +All error messages are directed to the +.BR TIFFError (3TIFF) +routine. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFReadEncodedStrip (3TIFF), +.BR TIFFReadScanline (3TIFF), +.BR TIFFStripSize (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFReadRawTile.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFReadRawTile.3tiff new file mode 100644 index 000000000..3945dd904 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFReadRawTile.3tiff @@ -0,0 +1,65 @@ +.\" $Id: TIFFReadRawTile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFReadRawTile 3TIFF "October 15, 1995" "libtiff" +.SH NAME +TIFFReadRawTile \- return an undecoded tile of data from an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "tsize_t TIFFReadRawTile(TIFF *" tif ", ttile_t " tile ", tdata_t " buf ", tsize_t " size ")" +.SH DESCRIPTION +Read the contents of the specified tile into the (user supplied) data buffer. +Note that the value of +.I tile +is a ``raw tile number.'' That is, the caller must take into account whether +or not the data is organized in separate planes (\c +.IR PlanarConfiguration =2). +.I TIFFComputeTile +automatically does this when converting an (x,y,z,sample) coordinate quadruple +to a tile number. To read a full tile of data the data buffer should typically +be at least as large as the value returned by +.IR TIFFTileSize . +.SH "RETURN VALUES" +The actual number of bytes of data that were placed in +.I buf +is returned; +.IR TIFFReadEncodedTile +returns \-1 if an error was encountered. +.SH DIAGNOSTICS +All error messages are directed to the +.BR TIFFError (3TIFF) +routine. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFReadEncodedTile (3TIFF), +.BR TIFFReadTile (3TIFF), +.BR TIFFTileSize (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFReadScanline.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFReadScanline.3tiff new file mode 100644 index 000000000..7baf65199 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFReadScanline.3tiff @@ -0,0 +1,94 @@ +.\" $Id: TIFFReadScanline.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFReadScanline 3TIFF "October 15, 1995" "libtiff" +.SH NAME +TIFFReadScanline \- read and decode a scanline of data from an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFReadScanline(TIFF *" tif ", tdata_t " buf ", uint32 " row ", tsample_t " sample ")" +.SH DESCRIPTION +Read the data for the specified row into the (user supplied) data buffer +.IR buf . +The data are returned decompressed and, in the native byte- and bit-ordering, +but are otherwise packed (see further below). The buffer must be large enough +to hold an entire scanline of data. Applications should call the routine +.IR TIFFScanlineSize +to find out the size (in bytes) of a scanline buffer. +The +.I row +parameter is always used by +.IR TIFFReadScanline ; +the +.I sample +parameter is used only if data are organized in separate planes (\c +.IR PlanarConfiguration =2). +.SH NOTES +The library attempts to hide bit- and byte-ordering differences between the +image and the native machine by converting data to the native machine order. +Bit reversal is done if the +.I FillOrder +tag is opposite to the native machine bit order. 16- and 32-bit samples are +automatically byte-swapped if the file was written with a byte order opposite +to the native machine byte order, +.PP +In C++ the +.I sample +parameter defaults to 0. +.SH "RETURN VALUES" +.IR TIFFReadScanline +returns \-1 if it detects an error; otherwise 1 is returned. +.SH DIAGNOSTICS +All error messages are directed to the +.IR TIFFError (3TIFF) +routine. +.PP +.BR "Compression algorithm does not support random access" . +Data was requested in a non-sequential order from a file that uses a +compression algorithm and that has +.I RowsPerStrip +greater than one. +That is, data in the image is stored in a compressed form, and with multiple +rows packed into a strip. In this case, the library does not support random +access to the data. The data should either be accessed sequentially, or the +file should be converted so that each strip is made up of one row of data. +.SH BUGS +Reading subsampled YCbCR data does not work correctly because, for +.IR PlanarConfiguration =2 +the size of a scanline is not calculated on a per-sample basis, and for +.IR PlanarConfiguration =1 +the library does not unpack the block-interleaved samples; use the strip- and +tile-based interfaces to read these formats. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFReadEncodedStrip (3TIFF), +.BR TIFFReadRawStrip (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFReadTile.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFReadTile.3tiff new file mode 100644 index 000000000..4a9b20d58 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFReadTile.3tiff @@ -0,0 +1,84 @@ +.\" $Id: TIFFReadTile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFReadTile 3TIFF "December 16, 1991" "libtiff" +.SH NAME +TIFFReadTile \- read and decode a tile of data from an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "tsize_t TIFFReadTile(TIFF *" tif ", tdata_t " buf ", uint32 " x ", uint32 " y ", uint32 " z ", tsample_t " sample ")" +.SH DESCRIPTION +Return the data for the tile +.I containing +the specified coordinates. The data placed in +.I buf +are returned decompressed and, typically, in the native byte- and +bit-ordering, but are otherwise packed (see further below). The buffer must be +large enough to hold an entire tile of data. Applications should call the +routine +.IR TIFFTileSize +to find out the size (in bytes) of a tile buffer. The +.I x +and +.I y +parameters are always used by +.IR TIFFReadTile . +The +.I z +parameter is used if the image is deeper than 1 slice (\c +.IR ImageDepth >1). +The +.I sample +parameter is used only if data are organized in separate planes (\c +.IR PlanarConfiguration =2). +.SH NOTES +The library attempts to hide bit- and byte-ordering differences between the +image and the native machine by converting data to the native machine order. +Bit reversal is done if the +.I FillOrder +tag is opposite to the native machine bit order. 16- and 32-bit samples are +automatically byte-swapped if the file was written with a byte order opposite +to the native machine byte order, +.SH "RETURN VALUES" +.IR TIFFReadTile +returns \-1 if it detects an error; otherwise the number of bytes in the +decoded tile is returned. +.SH DIAGNOSTICS +All error messages are directed to the +.BR TIFFError (3TIFF) +routine. +.SH "SEE ALSO" +.BR TIFFCheckTile (3TIFF), +.BR TIFFComputeTile (3TIFF), +.BR TIFFOpen (3TIFF), +.BR TIFFReadEncodedTile (3TIFF), +.BR TIFFReadRawTile (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFSetDirectory.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFSetDirectory.3tiff new file mode 100644 index 000000000..162d3107d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFSetDirectory.3tiff @@ -0,0 +1,79 @@ +.\" $Id: TIFFSetDirectory.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFSetDirectory 3TIFF "October 15, 1995" "libtiff" +.SH NAME +TIFFSetDirectory, TIFFSetSubDirectory \- set the current directory for an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFSetDirectory(TIFF *" tif ", tdir_t " dirnum ")" +.br +.BI "int TIFFSetSubDirectory(TIFF *" tif ", uint32 " diroff ")" +.SH DESCRIPTION +.I TIFFSetDirectory +changes the current directory and reads its contents with +.IR TIFFReadDirectory . +The parameter +.I dirnum +specifies the subfile/directory as an integer number, with the first directory +numbered zero. +.PP +.I TIFFSetSubDirectory +acts like +.IR TIFFSetDirectory , +except the directory is specified as a file offset instead of an index; this +is required for accessing subdirectories linked through a +.I SubIFD +tag. +.SH "RETURN VALUES" +On successful return 1 is returned. Otherwise, 0 is returned if +.I dirnum +or +.I diroff +specifies a non-existent directory, or if an error was encountered while +reading the directory's contents. +.SH DIAGNOSTICS +All error messages are directed to the +.IR TIFFError (3TIFF) +routine. +.PP +.BR "%s: Error fetching directory count" . +An error was encountered while reading the ``directory count'' field. +.PP +.BR "%s: Error fetching directory link" . +An error was encountered while reading the ``link value'' that points to the +next directory in a file. +.SH "SEE ALSO" +.IR TIFFCurrentDirectory (3TIFF), +.IR TIFFOpen (3TIFF), +.IR TIFFReadDirectory (3TIFF), +.IR TIFFWriteDirectory (3TIFF), +.IR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFSetField.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFSetField.3tiff new file mode 100644 index 000000000..33e94717f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFSetField.3tiff @@ -0,0 +1,217 @@ +.\" $Id: TIFFSetField.3tiff,v 1.5 2010-05-06 02:54:46 olivier Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFSetField 3TIFF "October 29, 2004" "libtiff" +.SH NAME +TIFFSetField, TIFFVSetField \- set the value(s) of a tag in a +.SM TIFF +file open for writing +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFSetField(TIFF *" tif ", ttag_t " tag ", " ... ")" +.sp +.B "#include " +.sp +.BI "int TIFFVSetField(TIFF *" tif ", ttag_t " tag ", va_list " ap ")" +.SH DESCRIPTION +.IR TIFFSetField +sets the value of a field +or pseudo-tag in the current directory associated with +the open +.SM TIFF +file +.IR tif . +(A +.I pseudo-tag +is a parameter that is used to control the operation of the +.SM TIFF +library but whose value is not read or written to the underlying file.) +To set the value of a field +the file must have been previously opened for writing with +.IR TIFFOpen (3TIFF); +pseudo-tags can be set whether the file was opened for reading +or writing. +The field is identified by +.IR tag , +one of the values defined in the include file +.B tiff.h +(see also the table below). +The actual value is specified using a variable argument list, +as prescribed by the +.IR stdarg (3) +interface (\c +or, on some machines, the +.IR varargs (3) +interface.) +.PP +.IR TIFFVSetField +is functionally equivalent to +.IR TIFFSetField +except that it takes a pointer to a variable +argument list. +.I TIFFVSetField +is useful for writing routines that are layered +on top of the functionality provided by +.IR TIFFSetField . +.PP +The tags understood by +.IR libtiff , +the number of parameter values, and the +expected types for the parameter values are shown below. +The data types are: +.I char* +is null-terminated string and corresponds to the +.SM ASCII +data type; +.I uint16 +is an unsigned 16-bit value; +.I uint32 +is an unsigned 32-bit value; +.I uint16* +is an array of unsigned 16-bit values. +.I void* +is an array of data values of unspecified type. + +Consult the +.SM TIFF +specification for information on the meaning of each tag. +.PP +.nf +.ta \w'TIFFTAG_CONSECUTIVEBADFAXLINES'u+2n +\w'Count'u+2n +\w'TIFFFaxFillFunc \(dg'u+2n +\fITag Name\fP \fICount\fP \fITypes\fP \fINotes\fP +.sp 5p +TIFFTAG_ARTIST 1 char* +TIFFTAG_BADFAXLINES 1 uint32 +TIFFTAG_BITSPERSAMPLE 1 uint16 \(dg +TIFFTAG_CLEANFAXDATA 1 uint16 +TIFFTAG_COLORMAP 3 uint16* 1< 0 +TIFFTAG_SAMPLEFORMAT 1 uint16 \(dg +TIFFTAG_SAMPLESPERPIXEL 1 uint16 \(dg value must be <= 4 +TIFFTAG_SMAXSAMPLEVALUE 1 double +TIFFTAG_SMINSAMPLEVALUE 1 double +TIFFTAG_SOFTWARE 1 char* +TIFFTAG_STONITS 1 double \(dg +TIFFTAG_SUBFILETYPE 1 uint32 +TIFFTAG_SUBIFD 2 uint16,uint32* count & offsets array +TIFFTAG_TARGETPRINTER 1 char* +TIFFTAG_THRESHHOLDING 1 uint16 +TIFFTAG_TILEDEPTH 1 uint32 \(dg +TIFFTAG_TILELENGTH 1 uint32 \(dg must be a multiple of 8 +TIFFTAG_TILEWIDTH 1 uint32 \(dg must be a multiple of 8 +TIFFTAG_TRANSFERFUNCTION 1 or 3\(dd uint16* 1<" +.sp +.BI "void TIFFWarning(const char *" module ", const char *" fmt ", " ... ")" +.sp +.B "#include " +.sp +.BI "typedef void (*TIFFWarningHandler)(const char *" module ", const char *" fmt ", va_list " ap ");" +.sp +.BI "TIFFWarningHandler TIFFSetWarningHandler(TIFFWarningHandler " handler ");" +.SH DESCRIPTION +.I TIFFWarning +invokes the library-wide warning handler function to (normally) write a +warning message to the +.BR stderr . +The +.I fmt +parameter is a +.IR printf (3S) +format string, and any number arguments can be supplied. The +.I module +parameter is interpreted as a string that, if non-zero, should be printed +before the message; it typically is used to identify the software module in +which a warning is detected. +.PP +Applications that desire to capture control in the event of a warning should +use +.IR TIFFSetWarningHandler +to override the default warning handler. +A +.SM NULL +(0) warning handler function may be installed to suppress error messages. +.SH "RETURN VALUES" +.IR TIFFSetWarningHandler +returns a reference to the previous error handling function. +.SH "SEE ALSO" +.BR TIFFError (3TIFF), +.BR libtiff (3TIFF), +.BR printf (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFWriteDirectory.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteDirectory.3tiff new file mode 100644 index 000000000..b8de6bf58 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteDirectory.3tiff @@ -0,0 +1,138 @@ +.\" $Id: TIFFWriteDirectory.3tiff,v 1.3 2010-12-12 01:45:35 faxguy Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFWriteDirectory 3TIFF "September 26, 2001" "libtiff" +.SH NAME +TIFFWriteDirectory, TIFFRewriteDirectory, TIFFCheckpointDirectory \- write the +current directory in an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFWriteDirectory(TIFF *" tif ")" +.br +.BI "int TIFFRewriteDirectory(TIFF *" tif ")" +.br +.BI "int TIFFCheckpointDirectory(TIFF *" tif ")" +.SH DESCRIPTION +.IR TIFFWriteDirectory +will write the contents of the current directory to the file and setup to +create a new subfile in the same file. Applications only need to call +.IR TIFFWriteDirectory +when writing multiple subfiles to a single +.SM TIFF +file. +.IR TIFFWriteDirectory +is automatically called by +.IR TIFFClose +and +.IR TIFFFlush +to write a modified directory if the file is open for writing. +.PP +The +.IR TIFFRewriteDirectory +function operates similarly to +.IR TIFFWriteDirectory, +but can be called with directories previously read or written that already +have an established location in the file. It will rewrite the directory, +but instead of place it at it's old location (as +.IR TIFFWriteDirectory +would) it will place them at the end of the file, correcting the pointer from +the preceding directory or file header to point to it's new location. This +is particularly important in cases where the size of the directory and +pointed to data has grown, so it won't fit in the space available at the +old location. +.PP +The +.IR TIFFCheckpointDirectory +writes the current state of the tiff directory into the file to make what +is currently in the file readable. Unlike +.IR TIFFWriteDirectory, +.IR TIFFCheckpointDirectory +does not free up the directory data structures in memory, so they can be +updated (as strips/tiles are written) and written again. Reading such +a partial file you will at worst get a tiff read error for the first +strip/tile encountered that is incomplete, but you will at least get +all the valid data in the file before that. When the file is complete, +just use +.IR TIFFWriteDirectory +as usual to finish it off cleanly. +.SH "RETURN VALUES" +1 is returned when the contents are successfully written to the file. +Otherwise, 0 is returned if an error was encountered when writing +the directory contents. +.SH DIAGNOSTICS +All error messages are directed to the +.IR TIFFError (3TIFF) +routine. +.PP +.BR "Error post-encoding before directory write" . +Before writing the contents of the current directory, any pending data are +flushed. This message indicates that an error occurred while doing this. +.PP +.BR "Error flushing data before directory write" . +Before writing the contents of the current directory, any pending data are +flushed. This message indicates that an error occurred while doing this. +.PP +.BR "Cannot write directory, out of space" . +There was not enough space to allocate a temporary area for the directory that +was to be written. +.PP +.BR "Error writing directory count" . +A write error occurred when writing the count of fields in the directory. +.PP +.BR "Error writing directory contents" . +A write error occurred when writing the directory fields. +.PP +.BR "Error writing directory link" . +A write error occurred when writing the link to the next directory. +.PP +\fBError writing data for field "%s"\fP. +A write error occurred when writing indirect data for the specified field. +.PP +.BR "Error writing TIFF header" . +A write error occurred when re-writing header at the front of the file. +.PP +.BR "Error fetching directory count" . +A read error occurred when fetching the directory count field for +a previous directory. +This can occur when setting up a link to the directory that is being +written. +.PP +.BR "Error fetching directory link" . +A read error occurred when fetching the directory link field for +a previous directory. +This can occur when setting up a link to the directory that is being +written. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFError (3TIFF), +.BR TIFFReadDirectory (3TIFF), +.BR TIFFSetDirectory (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFWriteEncodedStrip.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteEncodedStrip.3tiff new file mode 100644 index 000000000..41306343c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteEncodedStrip.3tiff @@ -0,0 +1,102 @@ +.\" $Id: TIFFWriteEncodedStrip.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFWriteEncodedStrip 3TIFF "October 15, 1995" "libtiff" +.SH NAME +TIFFWritedEncodedStrip \- compress and write a strip of data to an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "tsize_t TIFFWriteEncodedStrip(TIFF *" tif ", tstrip_t " strip ", tdata_t " buf ", tsize_t " size ")" +.SH DESCRIPTION +Compress +.I size +bytes of raw data from +.I buf +and write the result to the specified strip; replacing any previously written +data. Note that the value of +.I strip +is a ``raw strip number.'' That is, the caller must take into account whether +or not the data are organized in separate planes (\c +.IR PlanarConfiguration =2). +.SH NOTES +The library writes encoded data using the native machine byte order. Correctly +implemented +.SM TIFF +readers are expected to do any necessary byte-swapping to correctly process +image data with BitsPerSample greater than 8. +.PP +The strip number must be valid according to the current settings of the +.I ImageLength +and +.I RowsPerStrip +tags. +An image may be dynamically grown by increasing the value of +.I ImageLength +prior to each call to +.IR TIFFWriteEncodedStrip . +.SH "RETURN VALUES" +\-1 is returned if an error was encountered. Otherwise, the value of +.IR size +is returned. +.SH DIAGNOSTICS +All error messages are directed to the +.IR TIFFError (3TIFF) +routine. +.PP +\fB%s: File not open for writing\fP. The file was opened for reading, not +writing. +.PP +\fBCan not write scanlines to a tiled image\fP. The image is assumed to be +organized in tiles because the +.I TileWidth +and +.I TileLength +tags have been set with +.IR TIFFSetField (3TIFF). +.PP +\fB%s: Must set "ImageWidth" before writing data\fP. +The image's width has not be set before the first write. See +.IR TIFFSetField (3TIFF) +for information on how to do this. +.PP +\fB%s: Must set "PlanarConfiguration" before writing data\fP. +The organization of data has not be defined before the first write. See +.IR TIFFSetField (3TIFF) +for information on how to do this. +.PP +\fB%s: No space for strip arrays"\fP. +There was not enough space for the arrays that hold strip offsets and byte +counts. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFWriteScanline (3TIFF), +.BR TIFFWriteRawStrip (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFWriteEncodedTile.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteEncodedTile.3tiff new file mode 100644 index 000000000..4bb471f8c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteEncodedTile.3tiff @@ -0,0 +1,96 @@ +.\" $Id: TIFFWriteEncodedTile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFWriteEncodedTile 3TIFF "December 16, 1991" "libtiff" +.SH NAME +TIFFWritedEncodedTile \- compress and write a tile of data to an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "tsize_t TIFFWriteEncodedTile(TIFF *" tif ", ttile_t " tile ", tdata_t " buf ", tsize_t " size ")" +.SH DESCRIPTION +Compress +.I size +bytes of raw data from +.I buf +and +.B append +the result to the end of the specified tile. Note that the value of +.I tile +is a ``raw tile number.'' That is, the caller must take into account whether +or not the data are organized in separate places (\c +.IR PlanarConfiguration =2). +.IR TIFFComputeTile +automatically does this when converting an (x,y,z,sample) coordinate quadruple +to a tile number. +.SH NOTES +The library writes encoded data using the native machine byte order. Correctly +implemented +.SM TIFF +readers are expected to do any necessary byte-swapping to correctly process +image data with BitsPerSample greater than 8. +.SH "RETURN VALUES" +\-1 is returned if an error was encountered. Otherwise, the value of +.IR size +is returned. +.SH DIAGNOSTICS +All error messages are directed to the +.BR TIFFError (3TIFF) +routine. +.PP +\fB%s: File not open for writing\fP. +The file was opened for reading, not writing. +.PP +\fBCan not write tiles to a stripped image\fP. +The image is assumed to be organized in strips because neither of the +.I TileWidth +or +.I TileLength +tags have been set with +.BR TIFFSetField (3TIFF). +.PP +\fB%s: Must set "ImageWidth" before writing data\fP. The image's width has not +be set before the first write. See +.BR TIFFSetField (3TIFF) +for information on how to do this. +.PP +\fB%s: Must set "PlanarConfiguration" before writing data\fP. The organization +of data has not be defined before the first write. See +.BR TIFFSetField (3TIFF) +for information on how to do this. +.PP +\fB%s: No space for tile arrays"\fP. +There was not enough space for the arrays that hold tile offsets and byte +counts. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFWriteTile (3TIFF), +.BR TIFFWriteRawTile (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFWriteRawStrip.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteRawStrip.3tiff new file mode 100644 index 000000000..0fed3aa37 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteRawStrip.3tiff @@ -0,0 +1,96 @@ +.\" $Id: TIFFWriteRawStrip.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFWriteRawstrip 3TIFF "October 15, 1995" "libtiff" +.SH NAME +TIFFWriteRawStrip \- write a strip of raw data to an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "tsize_t TIFFWriteRawStrip(TIFF *" tif ", tstrip_t " strip ", tdata_t " buf ", tsize_t " size ")" +.SH DESCRIPTION +Append +.I size +bytes of raw data to the specified strip. +.SH NOTES +The strip number must be valid according to the current settings of the +.I ImageLength +and +.I RowsPerStrip +tags. +An image may be dynamically grown by increasing the value of +.I ImageLength +prior to each call to +.IR TIFFWriteRawStrip . +.SH "RETURN VALUES" +\-1 is returned if an error occurred. +Otherwise, the value of +.IR size +is returned. +.SH DIAGNOSTICS +All error messages are directed to the +.BR TIFFError (3TIFF) +routine. +.PP +\fB%s: File not open for writing\fP. +The file was opened for reading, not writing. +.PP +\fBCan not write scanlines to a tiled image\fP. The image is assumed to be +organized in tiles because the +.I TileWidth +and +.I TileLength +tags have been set with +.BR TIFFSetField (3TIFF). +.PP +\fB%s: Must set "ImageWidth" before writing data\fP. +The image's width has not be set before the first write. +See +.BR TIFFSetField (3TIFF) +for information on how to do this. +.PP +\fB%s: Must set "PlanarConfiguration" before writing data\fP. +The organization of data has not be defined before the first write. +See +.BR TIFFSetField (3TIFF) +for information on how to do this. +.PP +\fB%s: No space for strip arrays"\fP. +There was not enough space for the arrays that hold strip +offsets and byte counts. +.PP +\fB%s: Strip %d out of range, max %d\fP. +The specified strip is not a valid strip according to the +currently specified image dimensions. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFWriteEncodedStrip (3TIFF), +.BR TIFFWriteScanline (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFWriteRawTile.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteRawTile.3tiff new file mode 100644 index 000000000..d422e588c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteRawTile.3tiff @@ -0,0 +1,84 @@ +.\" $Id: TIFFWriteRawTile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFWriteRawtile 3TIFF "December 16, 1991" "libtiff" +.SH NAME +TIFFWriteRawTile \- write a tile of raw data to an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "tsize_t TIFFWriteRawTile(TIFF *" tif ", ttile_t " tile ", tdata_t " buf ", tsize_t " size ")" +.SH DESCRIPTION +Append +.I size +bytes of raw data to the specified tile. +.SH "RETURN VALUES" +\-1 is returned if an error occurred. Otherwise, the value of +.IR size +is returned. +.SH DIAGNOSTICS +All error messages are directed to the +.BR TIFFError (3TIFF) +routine. +.PP +\fB%s: File not open for writing\fP. +The file was opened for reading, not writing. +.PP +\fBCan not write tiles to a stripped image\fP. +The image is assumed to be organized in strips because neither of the +.I TileWidth +or +.I TileLength +tags have been set with +.BR TIFFSetField (3TIFF). +.PP +\fB%s: Must set "ImageWidth" before writing data\fP. +The image's width has not be set before the first write. +See +.BR TIFFSetField (3TIFF) +for information on how to do this. +.PP +\fB%s: Must set "PlanarConfiguration" before writing data\fP. The organization +of data has not be defined before the first write. See +.BR TIFFSetField (3TIFF) +for information on how to do this. +.PP +\fB%s: No space for tile arrays"\fP. +There was not enough space for the arrays that hold tile offsets and byte +counts. +.PP +\fB%s: Specified tile %d out of range, max %d\fP. +The specified tile is not valid according to the currently specified image +dimensions. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFWriteEncodedTile (3TIFF), +.BR TIFFWriteScanline (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFWriteScanline.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteScanline.3tiff new file mode 100644 index 000000000..0dd35f51b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteScanline.3tiff @@ -0,0 +1,154 @@ +.\" $Id: TIFFWriteScanline.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFWriteScanline 3TIFF "December 16, 1991" "libtiff" +.SH NAME +TIFFWriteScanline \- write a scanline to an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFWriteScanline(TIFF *" tif ", tdata_t " buf ", uint32 " row ", tsample_t " sample ")" +.SH DESCRIPTION +Write data to a file at the specified row. The +.I sample +parameter is used only if data are organized in separate planes (\c +.IR PlanarConfiguration =2). +The data are assumed to be uncompressed and in the native bit- and byte-order +of the host machine. The data written to the file is compressed according to +the compression scheme of the current +.SM TIFF +directory (see further below). If the current scanline is past the end of the +current subfile, the +.I ImageLength +field is automatically increased to include the scanline (except +for +.IR PlanarConfiguration =2, +where the +.I ImageLength +cannot be changed once the first data are written). If the +.I ImageLength +is increased, the +.I StripOffsets +and +.I StripByteCounts +fields are similarly enlarged to reflect data written past the previous end of +image. +.SH NOTES +The library writes encoded data using the native machine byte order. Correctly +implemented +.SM TIFF +readers are expected to do any necessary byte-swapping to correctly process +image data with BitsPerSample greater than 8. The library attempts to hide +bit-ordering differences between the image and the native machine by +converting data from the native machine order. +.PP +In C++ the +.I sample +parameter defaults to 0. +.PP +Once data are written to a file for the current directory, the values of +certain tags may not be altered; see +.IR TIFFSetField (3TIFF) +for more information. +.PP +It is not possible to write scanlines to a file that uses a tiled +organization. The routine +.IR TIFFIsTiled +can be used to determine if the file is organized as tiles or strips. +.SH "RETURN VALUES" +.IR TIFFWriteScanline +returns \-1 if it immediately detects an error and 1 for a successful write. +.SH DIAGNOSTICS +All error messages are directed to the +.IR TIFFError (3TIFF) +routine. +.PP +.BR "%s: File not open for writing . +The file was opened for reading, not writing. +.PP +.BR "Can not write scanlines to a tiled image" . +An attempt was made to write a scanline to a tiled image. The image is assumed +to be organized in tiles because the +.I TileWidth +and +.I TileLength +tags have been set with +.IR TIFFSetField (3TIFF). +.PP +.BR "Compression algorithm does not support random access" . +Data was written in a non-sequential order to a file that uses a compression +algorithm and that has +.I RowsPerStrip +greater than one. That is, data in the image is to be stored in a compressed +form, and with multiple rows packed into a strip. In this case, the library +does not support random access to the data. The data should either be written +as entire strips, sequentially by rows, or the value of +.I RowsPerStrip +should be set to one. +.PP +\fB%s: Must set "ImageWidth" before writing data\fP. +The image's width has not be set before the first write. +See +.BR TIFFSetField (3TIFF) +for information on how to do this. +.PP +\fB%s: Must set "PlanarConfiguration" before writing data\fP. +The organization of data has not be defined before the first write. +See +.BR TIFFSetField (3TIFF) +for information on how to do this. +.PP +\fBCan not change "ImageLength" when using separate planes\fP. Separate image +planes are being used (\c +.IR PlanarConfiguration =2), +but the number of rows has not been specified before the first write. The +library supports the dynamic growth of an image only when data are organized +in a contiguous manner (\c +.IR PlanarConfiguration =1). +.PP +.BR "%d: Sample out of range, max %d" . +The +.I sample +parameter was greater than the value of the SamplesPerPixel tag. +.PP +.BR "%s: No space for strip arrays . +There was not enough space for the arrays that hold strip offsets and byte +counts. +.SH BUGS +Writing subsampled YCbCR data does not work correctly because, for +.IR PlanarConfiguration =2 +the size of a scanline is not calculated on a per-sample basis, and for +.IR PlanarConfiguration =1 +the library does not pack the block-interleaved samples. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFWriteEncodedStrip (3TIFF), +.BR TIFFWriteRawStrip (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFWriteTile.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteTile.3tiff new file mode 100644 index 000000000..08250f7ce --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFWriteTile.3tiff @@ -0,0 +1,77 @@ +.\" $Id: TIFFWriteTile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFWriteTile 3TIFF "November 29, 1999" "libtiff" +.SH NAME +TIFFWriteTile \- encode and write a tile of data to an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "tsize_t TIFFWriteTile(TIFF *" tif ", tdata_t " buf ", uint32 " x ", uint32 " y ", uint32 " z ", tsample_t " sample ")" +.SH DESCRIPTION +Write the data for the tile +.I containing +the specified coordinates. The data in +.I buf +are is (potentially) compressed, and written to the indicated file, normally +being appended to the end of the file. The buffer must be contain an entire +tile of data. Applications should call the routine +.IR TIFFTileSize +to find out the size (in bytes) of a tile buffer. The +.I x +and +.I y +parameters are always used by +.IR TIFFWriteTile . +The +.I z +parameter is used if the image is deeper than 1 slice (\c +.IR ImageDepth >1). +The +.I sample +parameter is used only if data are organized in separate planes (\c +.IR PlanarConfiguration =2). +.SH "RETURN VALUES" +.IR TIFFWriteTile +returns \-1 if it detects an error; otherwise the number of bytes in the tile +is returned. +.SH DIAGNOSTICS +All error messages are directed to the +.BR TIFFError (3TIFF) +routine. +.SH "SEE ALSO" +.BR TIFFCheckTile (3TIFF), +.BR TIFFComputeTile (3TIFF), +.BR TIFFOpen (3TIFF), +.BR TIFFReadTile (3TIFF), +.BR TIFFWriteScanline (3TIFF), +.BR TIFFWriteEncodedTile (3TIFF), +.BR TIFFWriteRawTile (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFbuffer.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFbuffer.3tiff new file mode 100644 index 000000000..a4446cd96 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFbuffer.3tiff @@ -0,0 +1,77 @@ +.\" $Id: TIFFbuffer.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1995 Sam Leffler +.\" Copyright (c) 1995 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFBUFFER 3TIFF "November 1, 2005" "libtiff" +.SH NAME +TIFFReadBufferSetup, TIFFWriteBufferSetup \- I/O buffering control routines +.SH SYNOPSIS +.nf +.B "#include " +.sp +.BI "int TIFFReadBufferSetup(TIFF *" tif ", tdata_t " buffer ", tsize_t " size ");" +.BI "int TIFFWriteBufferSetup(TIFF *" tif ", tdata_t " buffer ", tsize_t " size ");" +.fi +.SH DESCRIPTION +The following routines are provided for client-control of the I/O buffers used +by the library. Applications need never use these routines; they are provided +only for ``intelligent clients'' that wish to optimize memory usage and/or +eliminate potential copy operations that can occur when working with images +that have data stored without compression. +.PP +.I TIFFReadBufferSetup +sets up the data buffer used to read raw (encoded) data from a file. If the +specified pointer is +.SM NULL +(zero), then a buffer of the appropriate size is allocated. Otherwise the +caller must guarantee that the buffer is large enough to hold any individual +strip of raw data. +.I TIFFReadBufferSetup +returns a non-zero value if the setup was successful and zero otherwise. +.PP +.I TIFFWriteBufferSetup +sets up the data buffer used to write raw (encoded) data to a file. If the +specified +.I size +is \-1 then the buffer size is selected to hold a complete tile or strip, or +at least 8 kilobytes, whichever is greater. If the specified +.I buffer +is +.SM NULL +(zero), then a buffer of the appropriate size is dynamically allocated. +.I TIFFWriteBufferSetup +returns a non-zero value if the setup was successful and zero otherwise. +.SH DIAGNOSTICS +.BR "%s: No space for data buffer at scanline %ld" . +.I TIFFReadBufferSetup +was unable to dynamically allocate space for a data buffer. +.PP +.BR "%s: No space for output buffer" . +.I TIFFWriteBufferSetup +was unable to dynamically allocate space for a data buffer. +.SH "SEE ALSO" +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFcodec.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFcodec.3tiff new file mode 100644 index 000000000..78a0f02e9 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFcodec.3tiff @@ -0,0 +1,82 @@ +.\" $Id: TIFFcodec.3tiff,v 1.3 2011-08-02 14:09:43 bfriesen Exp $ +.\" +.\" Copyright (c) 1995 Sam Leffler +.\" Copyright (c) 1995 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH CODEC 3TIFF "October 29, 2004" "libtiff" +.SH NAME +TIFFFindCODEC, TIFFRegisterCODEC, TIFFUnRegisterCODEC, TIFFIsCODECConfigured +\- codec-related utility routines +.SH SYNOPSIS +.B "#include " +.sp +.BI "const TIFFCodec* TIFFFindCODEC(uint16 " scheme ");" +.br +.BI "TIFFCodec* TIFFRegisterCODEC(uint16 " scheme ", const char *" method ", TIFFInitMethod " init ");" +.br +.BI "void TIFFUnRegisterCODEC(TIFFCodec *" codec ");" +.br +.BI "int TIFFIsCODECConfigured(uint16 " scheme ");" +.SH DESCRIPTION +.I libtiff +supports a variety of compression schemes implemented by software +.IR codecs . +Each codec adheres to a modular interface that provides for +the decoding and encoding of image data; as well as some other +methods for initialization, setup, cleanup, and the control +of default strip and tile sizes. +Codecs are identified by the associated value of the +.SM TIFF +.I Compression +tag; e.g. 5 for +.SM LZW +compression. +.PP +The +.I TIFFRegisterCODEC +routine can be used to +augment or override the set of codecs available to an application. +If the specified +.I scheme +already has a registered codec then it is +.I overridden +and any images with data encoded with this +compression scheme will be decoded using the supplied codec. +.PP +.I TIFFIsCODECConfigured +returns 1 if the codec is configured and working. Otherwise 0 will be returned. +.SH DIAGNOSTICS +.BR "No space to register compression scheme %s" . +.I TIFFRegisterCODEC +was unable to allocate memory for the data structures needed +to register a codec. +.PP +.BR "Cannot remove compression scheme %s; not registered" . +.I TIFFUnRegisterCODEC +did not locate the specified codec in the table of registered +compression schemes. +.SH "SEE ALSO" +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFcolor.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFcolor.3tiff new file mode 100644 index 000000000..e5d27270e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFcolor.3tiff @@ -0,0 +1,268 @@ +.\" $Id: TIFFcolor.3tiff,v 1.4 2009-11-30 12:22:26 fwarmerdam Exp $ +.\" +.\" Copyright (c) 2003, Andrey Kiselev +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH COLOR 3TIFF "December 21, 2003" "libtiff" +.SH NAME +TIFFYCbCrToRGBInit, TIFFYCbCrtoRGB, TIFFCIELabToRGBInit, TIFFCIELabToXYZ, +TIFFXYZToRGB \- color conversion routines. +.SH SYNOPSIS +.B "#include " +.sp +.BI "int TIFFYCbCrToRGBInit(TIFFYCbCrToRGB *" ycbcr ", float *" luma ", float *"refBlackWhite" );" +.br +.BI "void TIFFYCbCrtoRGB(TIFFYCbCrToRGB *" ycbcr ", uint32 " Y ", int32 " Cb ", int32 " Cr ", uint32 *" R ", uint32 *" G ", uint32 *" B " );" +.sp +.BI "int TIFFCIELabToRGBInit(TIFFCIELabToRGB *" cielab ", const TIFFDisplay *" display ", float *" refWhite ");" +.br +.BI "void TIFFCIELabToXYZ(TIFFCIELabToRGB *" cielab ", uint32 " L ", int32 " a ", int32 " b ", float *" X ", float *" Y ", float *" Z ");" +.br +.BI "void TIFFXYZToRGB(TIFFCIELabToRGB *" cielab ", float " X ", float " Y ", float " Z" , uint32 *" R ", uint32 *" G ", uint32 *" B ");" +.SH DESCRIPTION +TIFF supports several color spaces for images stored in that format. There is +usually a problem of application to handle the data properly and convert +between different colorspaces for displaying and printing purposes. To +simplify this task libtiff implements several color conversion routines +itself. In particular, these routines used in +.B TIFFRGBAImage(3TIFF) +interface. +.PP +.B TIFFYCbCrToRGBInit() +used to initialize +.I YCbCr +to +.I RGB +conversion state. Allocating and freeing of the +.I ycbcr +structure belongs to programmer. +.I TIFFYCbCrToRGB +defined in +.B tiffio.h +as +.PP +.RS +.nf +typedef struct { /* YCbCr->RGB support */ + TIFFRGBValue* clamptab; /* range clamping table */ + int* Cr_r_tab; + int* Cb_b_tab; + int32* Cr_g_tab; + int32* Cb_g_tab; + int32* Y_tab; +} TIFFYCbCrToRGB; +.fi +.RE +.PP +.I luma +is a float array of three values representing proportions of the red, green +and blue in luminance, Y (see section 21 of the TIFF 6.0 specification, where +the YCbCr images discussed). +.I TIFFTAG_YCBCRCOEFFICIENTS +holds that values in TIFF file. +.I refBlackWhite +is a float array of 6 values which specifies a pair of headroom and footroom +image data values (codes) for each image component (see section 20 of the +TIFF 6.0 specification where the colorinmetry fields discussed). +.I TIFFTAG_REFERENCEBLACKWHITE +is responsible for storing these values in TIFF file. Following code snippet +should helps to understand the the technique: +.PP +.RS +.nf +float *luma, *refBlackWhite; +uint16 hs, vs; + +/* Initialize structures */ +ycbcr = (TIFFYCbCrToRGB*) + _TIFFmalloc(TIFFroundup(sizeof(TIFFYCbCrToRGB), sizeof(long)) + + 4*256*sizeof(TIFFRGBValue) + + 2*256*sizeof(int) + + 3*256*sizeof(int32)); +if (ycbcr == NULL) { + TIFFError("YCbCr->RGB", + "No space for YCbCr->RGB conversion state"); + exit(0); +} + +TIFFGetFieldDefaulted(tif, TIFFTAG_YCBCRCOEFFICIENTS, &luma); +TIFFGetFieldDefaulted(tif, TIFFTAG_REFERENCEBLACKWHITE, &refBlackWhite); +if (TIFFYCbCrToRGBInit(ycbcr, luma, refBlackWhite) < 0) + exit(0); + +/* Start conversion */ +uint32 r, g, b; +uint32 Y; +int32 Cb, Cr; + +for each pixel in image + TIFFYCbCrtoRGB(img->ycbcr, Y, Cb, Cr, &r, &g, &b); + +/* Free state structure */ +_TIFFfree(ycbcr); +.fi +.RE +.PP + +.PP +.B TIFFCIELabToRGBInit() +initializes the +.I CIE L*a*b* 1976 +to +.I RGB +conversion state. +.B TIFFCIELabToRGB +defined as +.PP +.RS +.nf +#define CIELABTORGB_TABLE_RANGE 1500 + +typedef struct { /* CIE Lab 1976->RGB support */ + int range; /* Size of conversion table */ + float rstep, gstep, bstep; + float X0, Y0, Z0; /* Reference white point */ + TIFFDisplay display; + float Yr2r[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yr to r */ + float Yg2g[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yg to g */ + float Yb2b[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yb to b */ +} TIFFCIELabToRGB; +.fi +.RE +.PP +.I display +is a display device description, declared as +.PP +.RS +.nf +typedef struct { + float d_mat[3][3]; /* XYZ -> luminance matrix */ + float d_YCR; /* Light o/p for reference white */ + float d_YCG; + float d_YCB; + uint32 d_Vrwr; /* Pixel values for ref. white */ + uint32 d_Vrwg; + uint32 d_Vrwb; + float d_Y0R; /* Residual light for black pixel */ + float d_Y0G; + float d_Y0B; + float d_gammaR; /* Gamma values for the three guns */ + float d_gammaG; + float d_gammaB; +} TIFFDisplay; +.fi +.RE +.PP +For example, the one can use sRGB device, which has the following parameters: +.PP +.RS +.nf +TIFFDisplay display_sRGB = { + { /* XYZ -> luminance matrix */ + { 3.2410F, -1.5374F, -0.4986F }, + { -0.9692F, 1.8760F, 0.0416F }, + { 0.0556F, -0.2040F, 1.0570F } + }, + 100.0F, 100.0F, 100.0F, /* Light o/p for reference white */ + 255, 255, 255, /* Pixel values for ref. white */ + 1.0F, 1.0F, 1.0F, /* Residual light o/p for black pixel */ + 2.4F, 2.4F, 2.4F, /* Gamma values for the three guns */ +}; +.fi +.RE +.PP +.I refWhite +is a color temperature of the reference white. The +.I TIFFTAG_WHITEPOINT +contains the chromaticity of the white point of the image from where the +reference white can be calculated using following formulae: +.PP +.RS +refWhite_Y = 100.0 +.br +refWhite_X = whitePoint_x / whitePoint_y * refWhite_Y +.br +refWhite_Z = (1.0 - whitePoint_x - whitePoint_y) / whitePoint_y * refWhite_X +.br +.RE +.PP +The conversion itself performed in two steps: at the first one we will convert +.I CIE L*a*b* 1976 +to +.I CIE XYZ +using +.B TIFFCIELabToXYZ() +routine, and at the second step we will convert +.I CIE XYZ +to +.I RGB +using +.B TIFFXYZToRGB(). +Look at the code sample below: +.PP +.RS +.nf +float *whitePoint; +float refWhite[3]; + +/* Initialize structures */ +img->cielab = (TIFFCIELabToRGB *) + _TIFFmalloc(sizeof(TIFFCIELabToRGB)); +if (!cielab) { + TIFFError("CIE L*a*b*->RGB", + "No space for CIE L*a*b*->RGB conversion state."); + exit(0); +} + +TIFFGetFieldDefaulted(tif, TIFFTAG_WHITEPOINT, &whitePoint); +refWhite[1] = 100.0F; +refWhite[0] = whitePoint[0] / whitePoint[1] * refWhite[1]; +refWhite[2] = (1.0F - whitePoint[0] - whitePoint[1]) + / whitePoint[1] * refWhite[1]; +if (TIFFCIELabToRGBInit(cielab, &display_sRGB, refWhite) < 0) { + TIFFError("CIE L*a*b*->RGB", + "Failed to initialize CIE L*a*b*->RGB conversion state."); + _TIFFfree(cielab); + exit(0); +} + +/* Now we can start to convert */ +uint32 r, g, b; +uint32 L; +int32 a, b; +float X, Y, Z; + +for each pixel in image + TIFFCIELabToXYZ(cielab, L, a, b, &X, &Y, &Z); + TIFFXYZToRGB(cielab, X, Y, Z, &r, &g, &b); + +/* Don't forget to free the state structure */ +_TIFFfree(cielab); +.fi +.RE +.PP +.SH "SEE ALSO" +.BR TIFFRGBAImage (3TIFF) +.BR libtiff (3TIFF), +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFmemory.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFmemory.3tiff new file mode 100644 index 000000000..55f446b44 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFmemory.3tiff @@ -0,0 +1,90 @@ +.\" $Id: TIFFmemory.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1995 Sam Leffler +.\" Copyright (c) 1995 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH MEMORY 3TIFF "October 15, 1995" "libtiff" +.SH NAME +_TIFFmalloc, \c +_TIFFrealloc, \c +_TIFFfree, \c +_TIFFmemset, \c +_TIFFmemcpy, \c +_TIFFmemcmp, \c +\- memory management-related functions for use with +.SM TIFF +files +.SH SYNOPSIS +.B "#include " +.sp +.BI "tdata_t _TIFFmalloc(tsize_t " size ");" +.br +.BI "tdata_t _TIFFrealloc(tdata_t " buffer ", tsize_t " size ");" +.br +.BI "void _TIFFfree(tdata_t " buffer ");" +.br +.BI "void _TIFFmemset(tdata_t " s ", int " c ", tsize_t " n ");" +.br +.BI "void _TIFFmemcpy(tdata_t " dest ", const tdata_t " src ", tsize_t " n ");" +.br +.BI "int _TIFFmemcmp(const tdata_t " s1 ", const tdata_t "s2 ", tsize_t " n ");" +.SH DESCRIPTION +These routines are provided for writing portable software that uses +.IR libtiff ; +they hide any memory-management related issues, such as dealing with segmented +architectures found on 16-bit machines. +.PP +.I _TIFFmalloc +and +.I _TIFFrealloc +are used to dynamically allocate and reallocate memory used by +.IR libtiff ; +such as memory passed into the I/O routines. Memory allocated through these +interfaces is released back to the system using the +.I _TIFFfree +routine. +.PP +Memory allocated through one of the above interfaces can be set to a known +value using +.IR _TIFFmemset , +copied to another memory location using +.IR _TIFFmemcpy , +or compared for equality using +.IR _TIFFmemcmp . +These routines conform to the equivalent +.SM ANSI +C routines: +.IR memset , +.IR memcpy , +and +.IR memcmp , +repsectively. +.SH DIAGNOSTICS +None. +.SH "SEE ALSO" +.BR malloc (3), +.BR memory (3), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFquery.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFquery.3tiff new file mode 100644 index 000000000..8bddc889f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFquery.3tiff @@ -0,0 +1,142 @@ +.\" $Id: TIFFquery.3tiff,v 1.1 2004-11-11 14:39:16 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH QUERY 3TIFF "October 29, 2004" "libtiff" +.SH NAME +TIFFCurrentRow, +TIFFCurrentStrip, +TIFFCurrentTile, +TIFFCurrentDirectory, +TIFFLastDirectory, +TIFFFileno, +TIFFFileName, +TIFFGetMode, +TIFFIsTiled, +TIFFIsByteSwapped, +TIFFIsUpSampled, +TIFFIsMSB2LSB, +TIFFGetVersion +\- query routines +.SH SYNOPSIS +.B "#include " +.sp +.BI "uint32 TIFFCurrentRow(TIFF* " tif ")" +.br +.BI "tstrip_t TIFFCurrentStrip(TIFF* " tif ")" +.br +.BI "ttile_t TIFFCurrentTile(TIFF* " tif ")" +.br +.BI "tdir_t TIFFCurrentDirectory(TIFF* " tif ")" +.br +.BI "int TIFFLastDirectory(TIFF* " tif ")" +.br +.BI "int TIFFFileno(TIFF* " tif ")" +.br +.BI "char* TIFFFileName(TIFF* " tif ")" +.br +.BI "int TIFFGetMode(TIFF* " tif ")" +.br +.BI "int TIFFIsTiled(TIFF* " tif ")" +.br +.BI "int TIFFIsByteSwapped(TIFF* " tif ")" +.br +.BI "int TIFFIsUpSampled(TIFF* " tif ")" +.br +.BI "int TIFFIsMSB2LSB(TIFF* " tif ")" +.br +.BI "const char* TIFFGetVersion(void)" +.SH DESCRIPTION +The following routines return status information about an open +.SM TIFF +file. +.PP +.IR TIFFCurrentDirectory +returns the index of the current directory (directories are numbered starting +at 0). This number is suitable for use with the +.IR TIFFSetDirectory +routine. +.PP +.IR TIFFLastDirectory +returns a non-zero value if the current directory is the last directory in the +file; otherwise zero is returned. +.PP +.IR TIFFCurrentRow , +.IR TIFFCurrentStrip , +and +.IR TIFFCurrentTile , +return the current row, strip, and tile, respectively, that is being read or +written. These values are updated each time a read or write is done. +.PP +.IR TIFFFileno +returns the underlying file descriptor used to access the +.SM TIFF +image in the filesystem. +.PP +.IR TIFFFileName +returns the pathname argument passed to +.IR TIFFOpen +or +.IR TIFFFdOpen . +.PP +.IR TIFFGetMode +returns the mode with which the underlying file was opened. On +.SM UNIX +systems, this is the value passed to the +.IR open (2) +system call. +.PP +.IR TIFFIsTiled +returns a non-zero value if the image data has a tiled organization. Zero is +returned if the image data is organized in strips. +.PP +.IR TIFFIsByteSwapped +returns a non-zero value if the image data was in a different byte-order than +the host machine. Zero is returned if the TIFF file and local host byte-orders +are the same. Note that TIFFReadTile(), TIFFReadStrip() and +TIFFReadScanline() functions already normally perform byte swapping to local +host order if needed. +.PP +.I TIFFIsUpSampled +returns a non-zero value if image data returned through the read interface +routines is being up-sampled. This can be useful to applications that want to +calculate I/O buffer sizes to reflect this usage (though the usual strip and +tile size routines already do this). +.PP +.I TIFFIsMSB2LSB +returns a non-zero value if the image data is being returned with bit 0 as the +most significant bit. +.PP +.IR TIFFGetVersion +returns an +.SM ASCII +string that has a version stamp for the +.SM TIFF +library software. +.SH DIAGNOSTICS +None. +.SH "SEE ALSO" +.IR libtiff (3TIFF), +.IR TIFFOpen (3TIFF), +.IR TIFFFdOpen (3TIFF) diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFsize.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFsize.3tiff new file mode 100644 index 000000000..6de9084ad --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFsize.3tiff @@ -0,0 +1,59 @@ +.\" $Id: TIFFsize.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFSIZE 3TIFF "October 15, 1995" "libtiff" +.SH NAME +TIFFScanlineSize, TIFFRasterScanlineSize, +\- return the size of various items associated with an open +.SM TIFF +file +.SH SYNOPSIS +.B "#include " +.sp +.BI "tsize_t TIFFRasterScanlineSize(TIFF *" tif ")" +.br +.BI "tsize_t TIFFScanlineSize(TIFF *" tif ")" +.SH DESCRIPTION +.I TIFFScanlineSize +returns the size in bytes of a row of data as it would be returned in a call +to +.IR TIFFReadScanline , +or as it would be expected in a call to +.IR TIFFWriteScanline . +.PP +.I TIFFRasterScanlineSize +returns the size in bytes of a complete decoded and packed raster scanline. +Note that this value may be different from the value returned by +.I TIFFScanlineSize +if data is stored as separate planes. +.SH DIAGNOSTICS +None. +.SH "SEE ALSO" +.BR TIFFOpen (3TIFF), +.BR TIFFReadScanline (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFstrip.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFstrip.3tiff new file mode 100644 index 000000000..bb9658e50 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFstrip.3tiff @@ -0,0 +1,99 @@ +.\" $Id: TIFFstrip.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1992-1997 Sam Leffler +.\" Copyright (c) 1992-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFSTRIP 3TIFF "October 15, 1995" "libtiff" +.SH NAME +TIFFDefaultStripSize, TIFFStripSize, TIFFVStripSize, TIFFRawStripSize, +TIFFComputeStrip, TIFFNumberOfStrips \- strip-related utility routines +.SH SYNOPSIS +.B "#include " +.sp +.BI "uint32 TIFFDefaultStripSize(TIFF *" tif ", uint32 " estimate ")" +.br +.BI "tsize_t TIFFStripSize(TIFF *" tif ")" +.br +.BI "tsize_t TIFFVStripSize(TIFF *" tif ", uint32 " nrows ")" +.br +.BI "tsize_t TIFFRawStripSize(TIFF *" tif ", tstrip_t " strip ")" +.br +.BI "tstrip_t TIFFComputeStrip(TIFF *" tif ", uint32 " row ", tsample_t " sample ")" +.br +.BI "tstrip_t TIFFNumberOfStrips(TIFF *" tif ")" +.SH DESCRIPTION +.I TIFFDefaultStripSize +returns the number of rows for a reasonable-sized strip according to the +current settings of the +.IR ImageWidth , +.IR BitsPerSample , +.IR SamplesPerPixel , +tags and any compression-specific requirements. If the +.I estimate +parameter, if non-zero, then it is taken as an estimate of the desired strip +size and adjusted according to any compression-specific requirements. The +value returned by this function is typically used to define the +.I RowsPerStrip +tag. In lieu of any unusual requirements +.I TIFFDefaultStripSize +tries to create strips that have approximately +8 kilobytes of uncompressed data. +.PP +.IR TIFFStripSize +returns the equivalent size for a strip of data as it would be returned in a +call to +.IR TIFFReadEncodedStrip +or as it would be expected in a call to +.IR TIFFWriteEncodedStrip . +.PP +.I TIFFVStripSize +returns the number of bytes in a strip with +.I nrows +rows of data. +.PP +.I TIFFRawStripSize +returns the number of bytes in a raw strip (i.e. not decoded). +.PP +.IR TIFFComputeStrip +returns the strip that contains the specified coordinates. A valid strip is +always returned; out-of-range coordinate values are clamped to the bounds of +the image. The +.I row +parameter is always used in calculating a strip. The +.I sample +parameter is used only if data are organized in separate planes (\c +.IR PlanarConfiguration =2). +.PP +.IR TIFFNumberOfStrips +returns the number of strips in the image. +.SH DIAGNOSTICS +None. +.SH "SEE ALSO" +.BR TIFFReadEncodedStrip (3TIFF), +.BR TIFFReadRawStrip (3TIFF), +.BR TIFFWriteEncodedStrip (3TIFF), +.BR TIFFWriteRawStrip (3TIFF), +.BR libtiff (3TIFF), +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFswab.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFswab.3tiff new file mode 100644 index 000000000..d6432fa52 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFswab.3tiff @@ -0,0 +1,80 @@ +.\" $Id: TIFFswab.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH SWAB 3TIFF "November 04, 2004" "libtiff" +.SH NAME +TIFFGetBitRevTable, TIFFReverseBits, TIFFSwabShort, TIFFSwabLong, +TIFFSwabArrayOfShort, TIFFSwabArrayOfLong \- byte- and bit-swapping routines +.SH SYNOPSIS +.B "#include " +.sp +.BI "const unsigned char* TIFFGetBitRevTable(int " reversed ")" +.br +.BI "void TIFFReverseBits(u_char *" data ", unsigned long " nbytes ")" +.br +.BI "void TIFFSwabShort(uint16 *" data ")" +.br +.BI "void TIFFSwabLong(uint32 *" data ")" +.br +.BI "void TIFFSwabArrayOfShort(uint16 *" data ", unsigned long " nshorts ")" +.br +.BI "void TIFFSwabArrayOfLong(uint32 *" data ", unsigned long " nlongs ")" +.SH DESCRIPTION +The following routines are used by the library to swap +16- and 32-bit data and to reverse the order of bits in bytes. +.PP +.IR TIFFSwabShort +and +.IR TIFFSwabLong +swap the bytes in a single 16-bit and 32-bit item, respectively. +.IR TIFFSwabArrayOfShort +and +.IR TIFFSwabArrayOfLong +swap the bytes in an array of 16-bit and 32-bit items, respectively. +.PP +.IR TIFFReverseBits +replaces each byte in +.I data +with the equivalent bit-reversed value. This operation is performed with a +lookup table, which is returned using the +.IR TIFFGetBitRevTable +function. +.I reversed +parameter specifies which table should be returned. Supply +.I 1 +if you want bit reversal table. Supply +.I 0 +to get the table that do not reverse bit values. It is a lookup table that can +be used as an +.IR "identity function" ; +i.e. +.IR "TIFFNoBitRevTable[n] == n" . +.SH DIAGNOSTICS +None. +.SH "SEE ALSO" +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/TIFFtile.3tiff b/src/SDL2/external/tiff-4.0.3/man/TIFFtile.3tiff new file mode 100644 index 000000000..5431f31a8 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/TIFFtile.3tiff @@ -0,0 +1,131 @@ +.\" $Id: TIFFtile.3tiff,v 1.2 2005-11-02 11:07:19 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFTILE 3TIFF "February 14, 1992" "libtiff" +.SH NAME +TIFFTileSize, TIFFTileRowSize, TIFFVTileSize, TIFFDefaultTileSize, +TIFFComputeTile, TIFFCheckTile, TIFFNumberOfTiles \- tile-related utility +routines +.SH SYNOPSIS +.B "#include " +.sp +.BI "void TIFFDefaultTileSize(TIFF *" tif ", uint32 *" tw ", uint32 *" th ")" +.br +.BI "tsize_t TIFFTileSize(TIFF *" tif ")" +.br +.BI "tsize_t TIFFTileRowSize(TIFF *" tif ")" +.br +.BI "tsize_t TIFFVTileSize(TIFF *" tif ", uint32 " nrows ")" +.br +.BI "ttile_t TIFFComputeTile(TIFF *" tif ", uint32 " x ", uint32 " y ", uint32 " z ", tsample_t " sample ")" +.br +.BI "int TIFFCheckTile(TIFF *" tif ", uint32 " x ", uint32 " y ", uint32 " z ", tsample_t " sample ")" +.br +.BI "ttile_t TIFFNumberOfTiles(TIFF *" tif ")" +.br +.SH DESCRIPTION +.I TIFFDefaultTileSize +returns the pixel width and height of a reasonable-sized tile; suitable for +setting up the +.I TileWidth +and +.I TileLength +tags. +If the +.I tw +and +.I th +values passed in are non-zero, then they are adjusted to reflect any +compression-specific requirements. The returned width and height are +constrained to be a multiple of 16 pixels to conform with the +.SM TIFF +specification. +.PP +.I TIFFTileSize +returns the equivalent size for a tile of data as it would be returned in a +call to +.I TIFFReadTile +or as it would be expected in a call to +.IR TIFFWriteTile . +.PP +.I TIFFVTileSize +returns the number of bytes in a row-aligned tile with +.I nrows +of data. +.PP +.I TIFFTileRowSize +returns the number of bytes of a row of data in a tile. +.PP +.IR TIFFComputeTile +returns the tile that contains the specified coordinates. A valid tile is +always returned; out-of-range coordinate values are clamped to the bounds of +the image. The +.I x +and +.I y +parameters are always used in calculating a tile. The +.I z +parameter is used if the image is deeper than 1 slice (\c +.IR ImageDepth >1). +The +.I sample +parameter is used only if data are organized in separate planes (\c +.IR PlanarConfiguration =2). +.PP +.IR TIFFCheckTile +returns a non-zero value if the supplied coordinates are within the bounds of +the image and zero otherwise. The +.I x +parameter is checked against the value of the +.I ImageWidth +tag. The +.I y +parameter is checked against the value of the +.I ImageLength +tag. The +.I z +parameter is checked against the value of the +.I ImageDepth +tag (if defined). The +.I sample +parameter is checked against the value of the +.I SamplesPerPixel +parameter if the data are organized in separate planes. +.PP +.IR TIFFNumberOfTiles +returns the number of tiles in the image. +.SH DIAGNOSTICS +None. +.SH "SEE ALSO" +.BR TIFFReadEncodedTile (3TIFF), +.BR TIFFReadRawTile (3TIFF), +.BR TIFFReadTile (3TIFF), +.BR TIFFWriteEncodedTile (3TIFF), +.BR TIFFWriteRawTile (3TIFF), +.BR TIFFWriteTile (3TIFF), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/bmp2tiff.1 b/src/SDL2/external/tiff-4.0.3/man/bmp2tiff.1 new file mode 100644 index 000000000..f5d68ce01 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/bmp2tiff.1 @@ -0,0 +1,85 @@ +.\" $Id: bmp2tiff.1,v 1.7 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 2004, Andrey Kiselev +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH BMP2TIFF 1 "15 October, 2004" "libtiff" +.SH NAME +bmp2tiff \- create a +.SM TIFF +file from a Microsoft Windows Device Independent Bitmap image file +.SH SYNOPSIS +.B bmp2tiff +[ +.I options +] +.I input.bmp +[ +.I input2.bmp ...\& +] +.I output.tiff +.SH DESCRIPTION +.I bmp2tiff +converts a Microsoft Windows Device Independent Bitmap image file to +.SM TIFF. +If several input BMP files are being specified the multipage +.SM TIFF +output file will be created. By default, the +.SM TIFF +image is created with data samples packed (\c +.IR PlanarConfiguration =1), +compressed with the PackBits algorithm (\c +.IR Compression =32773), +and with each strip no more than 8 kilobytes. +These characteristics can overridden, or explicitly specified +with the options described below. +.SH OPTIONS +.TP +.B \-c +Specify a compression scheme to use when writing image data: +.B "\-c none" +for no compression, +.B "\-c packbits" +for the PackBits compression algorithm (the default), +.B "\-c jpeg" +for the baseline JPEG compression algorithm, +.B "\-c zip" +for the Deflate compression algorithm, +and +.B "\-c lzw" +for Lempel-Ziv & Welch. +.TP +.BI \-r " number" +Write data with a specified number of rows per strip; +by default the number of rows/strip is selected so that each strip +is approximately 8 kilobytes. +.SH "SEE ALSO" +.BR gif2tiff (1), +.BR pal2rgb (1), +.BR ppm2tiff (1), +.BR raw2tiff (1), +.BR ras2tiff (1), +.BR sgi2tiff (1), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/fax2ps.1 b/src/SDL2/external/tiff-4.0.3/man/fax2ps.1 new file mode 100644 index 000000000..9525f20b0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/fax2ps.1 @@ -0,0 +1,159 @@ +.\" $Id: fax2ps.1,v 1.4 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 1991-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.ds Ps PostScript +.if n .po 0 +.TH FAX2PS 1 "November 2, 2005" "libtiff" +.SH NAME +fax2ps \- convert a +.SM TIFF +facsimile to compressed \*(Ps\(tm +.SH SYNOPSIS +.B fax2ps +[ +.I options +] [ +.I file ...\& +] +.SH DESCRIPTION +.I fax2ps +reads one or more +.SM TIFF +facsimile image files and prints a compressed form of +\*(Ps on the standard output that is suitable for printing. +.PP +By default, each page is scaled to reflect the +image dimensions and resolutions stored in the file. +The +.B \-x +and +.B \-y +options can be used to specify the horizontal and vertical +image resolutions (lines/inch), respectively. +If the +.B \-S +option is specified, each page is scaled to fill an output page. +The default output page is 8.5 by 11 inches. +Alternate page dimensions can be specified in inches with the +.B \-W +and +.B \-H +options. +.PP +By default +.I fax2ps +generates \*(Ps for all pages in the file. +The +.B \-p +option can be used to select one or more pages from +a multi-page document. +.PP +.I fax2ps +generates a compressed form of \*(Ps that is +optimized for sending pages of text to a \*(Ps +printer attached to a host through a low-speed link (such +as a serial line). +Each output page is filled with white and then only +the black areas are drawn. +The \*(Ps specification of the black drawing operations +is optimized by using a special font that encodes the +move-draw operations required to fill +the black regions on the page. +This compression scheme typically results in a substantially +reduced \*(Ps description, relative to the straightforward +imaging of the page with a \*(Ps +.I image +operator. +This algorithm can, however, be ineffective +for continuous-tone and white-on-black images. +For these images, it sometimes is more efficient to send +the raster bitmap image directly; see +.BR tiff2ps (1). +.SH OPTIONS +.TP 10 +.BI \-p " number" +Print only the indicated page. +Multiple pages may be printed by specifying +this option more than once. +.TP 10 +.BI \-x " resolution" +Use +.I resolution +as the horizontal resolution, in dots/inch, of the image data. +By default this value is taken from the file. +.TP 10 +.BI \-y " resolution" +Use +.I resolution +as the vertical resolution, in lines/inch, of the image data. +By default this value is taken from the file. +.TP 10 +.B \-S +Scale each page of image data to fill the output page dimensions. +By default images are presented according to the dimension +information recorded in the +.SM TIFF +file. +.TP 10 +.BI \-W " width" +Use +.I width +as the width, in inches, of the output page. +.TP 10 +.BI \-H " height" +Use +.I height +as the height, in inches, of the output page. +.SH DIAGNOSTICS +Some messages about malformed +.SM TIFF +images come from the +.SM TIFF +library. +.PP +Various messages about badly formatted facsimile images +may be generated due to transmission errors in received +facsimile. +.I fax2ps +attempts to recover from such data errors by resynchronizing +decoding at the end of the current scanline. +This can result in long horizontal black lines in the resultant +\*(Ps image. +.SH NOTES +If the destination printer supports \*(Ps Level II then +it is always faster to just send the encoded bitmap generated +by the +.BR tiff2ps (1) +program. +.SH BUGS +.I fax2ps +should probably figure out when it is doing a poor +job of compressing the output and just generate +\*(Ps to image the bitmap raster instead. +.SH "SEE ALSO" +.BR tiff2ps (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/fax2tiff.1 b/src/SDL2/external/tiff-4.0.3/man/fax2tiff.1 new file mode 100644 index 000000000..873cab176 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/fax2tiff.1 @@ -0,0 +1,286 @@ +.\" $Id: fax2tiff.1,v 1.7 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 1990-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH FAX2TIFF 1 "November 2, 2005" "libtiff" +.SH NAME +fax2tiff \- create a +.SM TIFF +Class F fax file from raw fax data +.SH SYNOPSIS +.B fax2tiff +[ +.I options +] [ +.B \-o +.I output.tif +] +.I input.raw +.SH DESCRIPTION +.I Fax2tiff +creates a +.SM TIFF +file containing +.SM CCITT +Group 3 or Group 4 encoded data from one or more files containing ``raw'' +Group 3 or Group 4 encoded data (typically obtained directly from a fax modem). +By default, each row of data in the resultant +.SM TIFF +file is 1-dimensionally encoded and +padded or truncated to 1728 pixels, as needed. +The resultant image is a set of low resolution (98 lines/inch) +or medium resolution (196 lines/inch) +pages, each of which is a single strip of data. +The generated file conforms to the +.SM TIFF +Class F (\c +.SM FAX\c +) specification for storing facsimile data. +This means, in particular, that each page of the data does +.B not +include the trailing +.I "return to control" +(\c +.SM RTC\c +) code; as required +for transmission by the +.SM CCITT +Group 3 specifications. +The old, ``classic'', format is created if the +.B \-c +option is used. +(The Class F format can also be requested with the +.B \-f +option.) +.PP +The default name of the output image is +.IR fax.tif ; +this can be changed with the +.B \-o +option. +Each input file is assumed to be a separate page of facsimile data +from the same document. +The order in which input files are specified on the command +line is the order in which the resultant pages appear in the +output file. +.SH OPTIONS +Options that affect the interpretation of input data are: +.TP +.B \-3 +Assume input data is +.SM CCITT +Group 3 encoded (default). +.TP +.B \-4 +Assume input data is +.SM CCITT +Group 4 encoded. +.TP +.B \-U +Assume input data is uncompressed (Group 3 or Group 4). +.TP +.B \-1 +Assume input data is encoded with the 1-dimensional version of the +.SM CCITT +Group 3 Huffman encoding algorithm (default). +.TP +.B \-2 +Assume input data is 2-dimensional version of the +.SM CCITT +Group 3 Huffman encoding algorithm. +.TP +.B \-P +Assume input data is +.B not +EOL-aligned (default). This option has effect with Group 3 encoded input only. +.TP +.B \-A +Assume input data is EOL-aligned. This option has effect with Group 3 +encoded input only. +.TP +.B \-M +Treat input data as having bits filled from most significant bit (\c +.SM MSB\c +) to most least bit (\c +.SM LSB\c +). +.TP +.B \-L +Treat input data as having bits filled from least significant bit (\c +.SM LSB\c +) to most significant bit (\c +.SM MSB\c +) (default). +.TP +.B \-B +Assume input data was encoded with black as 0 and white as 1. +.TP +.B \-W +Assume input data was encoded with black as 1 and white as 0 (default). +.TP +.B \-R +Specify the vertical resolution, in lines/inch, of the input images. +By default input are assumed to have a vertical resolution of 196 lines/inch. +If images are low resolution facsimile, a value of 98 lines/inch should +be specified. +.TP +.B \-X +Specify the width, in pixels, of the input images. +By default input are assumed to have a width of 1728 pixels. +.PP +Options that affect the output file format are: +.TP +.B \-o +Specify the name of the output file. +.TP +.B \-7 +Force output to be compressed with the +.SM CCITT +Group 3 Huffman encoding algorithm (default). +.TP +.B \-8 +Force output to be compressed with the +.SM CCITT +Group 4 Huffman encoding. +.TP +.B \-u +Force output to be uncompressed (Group 3 or Group 4). +.TP +.B \-5 +Force output to be encoded with the 1-dimensional version of the +.SM CCITT +Group 3 Huffman encoding algorithm. +.TP +.B \-6 +Force output to be encoded with the 2-dimensional version of the +.SM CCITT +Group 3 Huffman encoding algorithm (default). +.TP +.B \-a +Force the last bit of each +.I "End Of Line" +(\c +.SM EOL\c +) code to land on a byte boundary (default). This ``zero padding'' will +be reflected in the contents of the +.I Group3Options +tag of the resultant +.SM TIFF +file. This option has effect with Group 3 encoded output only. +.TP +.B \-p +Do not EOL-align output. This option has effect with Group 3 encoded +output only. +.TP +.B \-c +Generate "classic" Group 3 TIFF format. +.TP +.B \-f +Generate TIFF Class F (TIFF/F) format (default). +.TP +.B \-m +Force output data to have bits filled from most significant bit (\c +.SM MSB\c +) to most least bit (\c +.SM LSB\c +). +.TP +.B \-l +Force output data to have bits filled from least significant bit (\c +.SM LSB\c +) to most significant bit (\c +.SM MSB\c +) (default). +.TP +.B \-r +Specify the number of rows (scanlines) in each strip of data +written to the output file. +By default (or when value +.B 0 +is specified), +.I tiffcp +attempts to set the rows/strip +that no more than 8 kilobytes of data appear in a strip (with except of G3/G4 +compression schemes). If you specify special value +.B \-1 +it will results in infinite number of the rows per strip. The entire image +will be the one strip in that case. This is default in case of G3/G4 output +compression schemes. +.TP +.B \-s +Stretch the input image vertically by writing each input row of +data twice to the output file. +.TP +.B \-v +Force +.I fax2tiff +to print the number of rows of data it retrieved from the input file. +.TP +.B \-z +Force output to be compressed with the LZW encoding. +.SH DIAGNOSTICS +The following warnings and errors come from the decoding +routines in the library. +.PP +.BR "Warning, %s: Premature EOL at scanline %d (x %d).\en" . +The input data had a row that was shorter than the expected width. +The row is padded with white. +.PP +.BR "%s: Premature EOF at scanline %d (x %d).\en" . +The decoder ran out of data in the middle of a scanline. +The resultant row is padded with white. +.PP +.BR "%s: Bad code word at row %d, x %d\en" . +An invalid Group 3 +.I code +was encountered while decoding the input file. +The row number and horizontal position is given. +The remainder of the input row is discarded, while +the corresponding output row is padded with white. +.PP +.BR "%s: Bad 2D code word at scanline %d.\en" . +An invalid Group 4 or 2D Group 3 +.I code +was encountered while decoding the input file. +The row number and horizontal position is given. +The remainder of the input row is discarded, while +the corresponding output row is padded with white. +.SH BUGS +Input data are assumed to have a a ``top left'' orientation; +it should be possible to override this assumption +from the command line. +.SH "SEE ALSO" +.BR "\s-1CCITT\s+1 Recommendation T.4" +(Standardization of Group 3 Facsimile Apparatus for Document Transmission). +.PP +.BR "The Spirit of TIFF Class F", +an appendix to the TIFF 5.0 specification prepared by Cygnet Technologies. +.PP +.BR tiffinfo (1), +.BR tiffdither (1), +.BR tiffgt (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/gif2tiff.1 b/src/SDL2/external/tiff-4.0.3/man/gif2tiff.1 new file mode 100644 index 000000000..5f01d8dcd --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/gif2tiff.1 @@ -0,0 +1,81 @@ +.\" $Id: gif2tiff.1,v 1.4 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 1991-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH GIF2TIFF 1 "November 2, 2005" "libtiff" +.SH NAME +gif2tiff \- create a +.SM TIFF +file from a GIF87 format image file +.SH SYNOPSIS +.B gif2tiff +[ +.I options +] +.I input.gif +.I output.tif +.SH DESCRIPTION +.I Gif2tiff +converts a file in the GIF87 format to +.SM TIFF. +The +.SM TIFF +image is created as a palette image, with samples +compressed with the Lempel-Ziv & Welch algorithm (\c +.IR Compression =5). +These characteristics can overridden, or explicitly specified +with the options described below. +.SH OPTIONS +.TP +.B \-c +Specify a compression scheme to use when writing image data: +.B "\-c none" +for no compression, +.B "\-c packbits" +for the PackBits compression algorithm, +.B "\-c zip" +for the Deflate compression algorithm, +and +.B "\-c lzw" +for Lempel-Ziv & Welch (the default). +.TP +.B \-r +Write data with a specified number of rows per strip; +by default the number of rows/strip is selected so that each strip +is approximately 8 kilobytes. +.SH NOTES +The program is based on Paul Haeberli's +.I fromgif +program which, in turn, is based on Marcel J.E. Mol's GIF reader. +.SH BUGS +Should have more options to control output format. +.SH "SEE ALSO" +.BR pal2rgb (1), +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiffmedian (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/libtiff.3tiff b/src/SDL2/external/tiff-4.0.3/man/libtiff.3tiff new file mode 100644 index 000000000..59895d620 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/libtiff.3tiff @@ -0,0 +1,545 @@ +.\" $Id: libtiff.3tiff,v 1.4 2012-07-29 15:45:30 tgl Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH INTRO 3TIFF "November 2, 2005" "libtiff" +.SH NAME +libtiff \- introduction to +.IR libtiff , +a library for reading and writing +.SM TIFF +files +.SH SYNOPSIS +.B "#include " +.sp +cc file.c +.B -ltiff +.SH DESCRIPTION +.I libtiff +is a library for reading and writing data files encoded with the +.I "Tag Image File" +format, Revision 6.0 (or revision 5.0 or revision 4.0). This file format is +suitable for archiving multi-color and monochromatic image data. +.PP +The library supports several compression algorithms, as indicated by the +.I Compression +field, including: +no compression (1), +.SM CCITT +1D Huffman compression (2), +.SM CCITT +Group 3 Facsimile compression (3), +.SM CCITT +Group 4 Facsimile compression (4), +Lempel-Ziv & Welch compression (5), +baseline JPEG compression (7), +word-aligned 1D Huffman compression (32771), +and +PackBits compression (32773). +In addition, several nonstandard compression algorithms are supported: the +4-bit compression algorithm used by the +.I ThunderScan +program (32809) (decompression only), NeXT's 2-bit compression algorithm +(32766) (decompression only), an experimental LZ-style algorithm known as +Deflate (32946), and an experimental CIE LogLuv compression scheme designed +for images with high dynamic range (32845 for LogL and 32845 for LogLuv). +Directory information may be in either little- or big-endian byte order\-byte +swapping is automatically done by the library. Data bit ordering may be either +Most Significant Bit (\c +.SM MSB\c +) to Least Significant Bit (\c +.SM LSB\c +) or +.SM LSB +to +.SM MSB. +Finally, the library does not support files in which the +.IR BitsPerSample , +.IR Compression , +.IR MinSampleValue , +or +.IR MaxSampleValue +fields are defined differently on a per-sample basis +(in Rev. 6.0 the +.I Compression +tag is not defined on a per-sample basis, so this is immaterial). +.SH "DATA TYPES" +The library makes extensive use of C typedefs to promote portability. +Two sets of typedefs are used, one for communication with clients +of the library and one for internal data structures and parsing of the +.SM TIFF +format. +The following typedefs are exposed to users either through function +definitions or through parameters passed through the varargs interfaces. +.in +.5i +.sp 5p +.ta +\w'typedef unsigned <\fIthing\fP> uint32; 'u +.nf +typedef unsigned short uint16; 16-bit unsigned integer +typedef unsigned <\fIthing\fP> uint32; 32-bit unsigned integer +.sp 5p +typedef unsigned int ttag_t; directory tag +typedef uint16 tdir_t; directory index +typedef uint16 tsample_t; sample number +typedef uint32 tstrip_t; strip number +typedef uint32 ttile_t; tile number +typedef int32 tsize_t; i/o size in bytes +typedef void* tdata_t; image data ref +typedef void* thandle_t; client data handle +typedef int32 toff_t; file offset +.fi +.sp 5p +.in -.5i +Note that +.IR tstrip_t , +.IR ttile_t , +and +.I tsize_t +are constrained to be no more than 32-bit quantities by 32-bit fields they are +stored in in the +.SM TIFF +image. +Likewise +.I tsample_t +is limited by the 16-bit field used to store the +.I SamplesPerPixel +tag. +.I tdir_t +constrains the maximum number of +.SM IFDs +that may appear in an image and may be an arbitrary size (w/o penalty). +.I ttag_t +must be either int, unsigned int, pointer, or double because the library uses +a varargs interface and +.SM "ANSI C" +restricts the type of the parameter before an ellipsis to be a promoted type. +.I toff_t +is defined as int32 because TIFF file offsets are (unsigned) 32-bit +quantities. A signed value is used because some interfaces return \-1 on +error. Finally, note that user-specified data references are passed as opaque +handles and only cast at the lowest layers where their type is presumed. +.SH "LIST OF ROUTINES" +The following routines are part of the library. Consult specific manual pages +for details on their operation; on most systems doing ``man function-name'' +will work. +.sp +.nf +.ta \w'TIFFCheckpointDirectory'u+2n +\fIName\fP \fIDescription\fP +.sp 5p +TIFFCheckpointDirectory writes the current state of the directory +TIFFCheckTile very x,y,z,sample is within image +TIFFCIELabToRGBInit initialize CIE L*a*b* 1976 to RGB conversion state +TIFFCIELabToXYZ perform CIE L*a*b* 1976 to CIE XYZ conversion +TIFFClientOpen open a file for reading or writing +TIFFClose close an open file +TIFFComputeStrip return strip containing y,sample +TIFFComputeTile return tile containing x,y,z,sample +TIFFCurrentDirectory return index of current directory +TIFFCurrentRow return index of current scanline +TIFFCurrentStrip return index of current strip +TIFFCurrentTile return index of current tile +TIFFDataWidth return the size of TIFF data types +TIFFError library error handler +TIFFFdOpen open a file for reading or writing +TIFFFieldDataType get data type from field information +TIFFFieldName get field name from field information +TIFFFieldPassCount get whether to pass a value count to Get/SetField +TIFFFieldReadCount get number of values to be read from field +TIFFFieldTag get tag value from field information +TIFFFieldWithName get field information given field name +TIFFFieldWithTag get field information given tag +TIFFFieldWriteCount get number of values to be written to field +TIFFFileName return name of open file +TIFFFileno return open file descriptor +TIFFFindCODEC find standard codec for the specific scheme +TIFFFindField get field information given tag and data type +TIFFFlush flush all pending writes +TIFFFlushData flush pending data writes +TIFFGetBitRevTable return bit reversal table +TIFFGetField return tag value in current directory +TIFFGetFieldDefaulted return tag value in current directory +TIFFGetMode return open file mode +TIFFGetVersion return library version string +TIFFIsCODECConfigured check, whether we have working codec +TIFFIsMSB2LSB return true if image data is being returned + with bit 0 as the most significant bit +TIFFIsTiled return true if image data is tiled +TIFFIsByteSwapped return true if image data is byte-swapped +TIFFNumberOfStrips return number of strips in an image +TIFFNumberOfTiles return number of tiles in an image +TIFFOpen open a file for reading or writing +TIFFPrintDirectory print description of the current directory +TIFFReadBufferSetup specify i/o buffer for reading +TIFFReadDirectory read the next directory +TIFFReadEncodedStrip read and decode a strip of data +TIFFReadEncodedTile read and decode a tile of data +TIFFReadRawStrip read a raw strip of data +TIFFReadRawTile read a raw tile of data +TIFFReadRGBAImage read an image into a fixed format raster +TIFFReadScanline read and decode a row of data +TIFFReadTile read and decode a tile of data +TIFFRegisterCODEC override standard codec for the specific scheme +TIFFReverseBits reverse bits in an array of bytes +TIFFRGBAImageBegin setup decoder state for TIFFRGBAImageGet +TIFFRGBAImageEnd release TIFFRGBAImage decoder state +TIFFRGBAImageGet read and decode an image +TIFFRGBAImageOK is image readable by TIFFRGBAImageGet +TIFFScanlineSize return size of a scanline +TIFFSetDirectory set the current directory +TIFFSetSubDirectory set the current directory +TIFFSetErrorHandler set error handler function +TIFFSetField set a tag's value in the current directory +TIFFSetWarningHandler set warning handler function +TIFFStripSize returns size of a strip +TIFFRawStripSize returns the number of bytes in a raw strip +TIFFSwabShort swap bytes of short +TIFFSwabLong swap bytes of long +TIFFSwabArrayOfShort swap bytes of an array of shorts +TIFFSwabArrayOfLong swap bytes of an array of longs +TIFFTileRowSize return size of a row in a tile +TIFFTileSize return size of a tile +TIFFUnRegisterCODEC unregisters the codec +TIFFVGetField return tag value in current directory +TIFFVGetFieldDefaulted return tag value in current directory +TIFFVSetField set a tag's value in the current directory +TIFFVStripSize returns the number of bytes in a strip +TIFFWarning library warning handler +TIFFWriteDirectory write the current directory +TIFFWriteEncodedStrip compress and write a strip of data +TIFFWriteEncodedTile compress and write a tile of data +TIFFWriteRawStrip write a raw strip of data +TIFFWriteRawTile write a raw tile of data +TIFFWriteScanline write a scanline of data +TIFFWriteTile compress and write a tile of data +TIFFXYZToRGB perform CIE XYZ to RGB conversion +TIFFYCbCrToRGBInit initialize YCbCr to RGB conversion state +TIFFYCbCrtoRGB perform YCbCr to RGB conversion +.sp +Auxiliary functions: +_TIFFfree free memory buffer +_TIFFmalloc dynamically allocate memory buffer +_TIFFmemcmp compare contents of the memory buffers +_TIFFmemcpy copy contents of the one buffer to another +_TIFFmemset fill memory buffer with a constant byte +_TIFFrealloc dynamically reallocate memory buffer + +.fi +.SH "TAG USAGE" +The table below lists the +.SM TIFF +tags that are recognized and handled by the library. +If no use is indicated in the table, then the library +reads and writes the tag, but does not use it internally. +Note that some tags are meaningful only when a particular +compression scheme is being used; e.g. +.I Group3Options +is only useful if +.I Compression +is set to +.SM CCITT +Group 3 encoding. +Tags of this sort are considered +.I codec-specific +tags and the library does not recognize them except when the +.I Compression +tag has been previously set to the relevant compression scheme. +.sp +.nf +.ta \w'TIFFTAG_JPEGTABLESMODE'u+2n +\w'Value'u+2n +\w'R/W'u+2n +\fITag Name\fP \fIValue\fP \fIR/W\fP \fILibrary Use/Notes\fP +.sp 5p +.nf +Artist 315 R/W +BadFaxLines 326 R/W +BitsPerSample 258 R/W lots +CellLength 265 parsed but ignored +CellWidth 264 parsed but ignored +CleanFaxData 327 R/W +ColorMap 320 R/W +ColorResponseUnit 300 parsed but ignored +Compression 259 R/W choosing codec +ConsecutiveBadFaxLines 328 R/W +Copyright 33432 R/W +DataType 32996 R obsoleted by SampleFormat tag +DateTime 306 R/W +DocumentName 269 R/W +DotRange 336 R/W +ExtraSamples 338 R/W lots +FaxRecvParams 34908 R/W +FaxSubAddress 34909 R/W +FaxRecvTime 34910 R/W +FillOrder 266 R/W control bit order +FreeByteCounts 289 parsed but ignored +FreeOffsets 288 parsed but ignored +GrayResponseCurve 291 parsed but ignored +GrayResponseUnit 290 parsed but ignored +Group3Options 292 R/W used by Group 3 codec +Group4Options 293 R/W +HostComputer 316 R/W +ImageDepth 32997 R/W tile/strip calculations +ImageDescription 270 R/W +ImageLength 257 R/W lots +ImageWidth 256 R/W lots +InkNames 333 R/W +InkSet 332 R/W +JPEGTables 347 R/W used by JPEG codec +Make 271 R/W +Matteing 32995 R obsoleted by ExtraSamples tag +MaxSampleValue 281 R/W +MinSampleValue 280 R/W +Model 272 R/W +NewSubFileType 254 R/W called SubFileType in spec +NumberOfInks 334 R/W +Orientation 274 R/W +PageName 285 R/W +PageNumber 297 R/W +PhotometricInterpretation 262 R/W used by Group 3 and JPEG codecs +PlanarConfiguration 284 R/W data i/o +Predictor 317 R/W used by LZW and Deflate codecs +PrimaryChromacities 319 R/W +ReferenceBlackWhite 532 R/W +ResolutionUnit 296 R/W used by Group 3 codec +RowsPerStrip 278 R/W data i/o +SampleFormat 339 R/W +SamplesPerPixel 277 R/W lots +SMinSampleValue 340 R/W +SMaxSampleValue 341 R/W +Software 305 R/W +StoNits 37439 R/W +StripByteCounts 279 R/W data i/o +StripOffsets 273 R/W data i/o +SubFileType 255 R/W called OSubFileType in spec +TargetPrinter 337 R/W +Thresholding 263 R/W +TileByteCounts 324 R/W data i/o +TileDepth 32998 R/W tile/strip calculations +TileLength 323 R/W data i/o +TileOffsets 324 R/W data i/o +TileWidth 322 R/W data i/o +TransferFunction 301 R/W +WhitePoint 318 R/W +XPosition 286 R/W +XResolution 282 R/W +YCbCrCoefficients 529 R/W used by TIFFRGBAImage support +YCbCrPositioning 531 R/W tile/strip size calulcations +YCbCrSubsampling 530 R/W +YPosition 286 R/W +YResolution 283 R/W used by Group 3 codec +.SH "PSEUDO TAGS" +In addition to the normal +.SM TIFF +tags the library supports a collection of +tags whose values lie in a range outside the valid range of +.SM TIFF +tags. +These tags are termed +.I pseud-tags +and are used to control various codec-specific functions within the library. +The table below summarizes the defined pseudo-tags. +.sp +.nf +.ta \w'TIFFTAG_JPEGTABLESMODE'u+2n +\w'Codec'u+2n +\w'R/W'u+2n +\fITag Name\fP \fICodec\fP \fIR/W\fP \fILibrary Use/Notes\fP +.sp 5p +.nf +TIFFTAG_FAXMODE G3 R/W general codec operation +TIFFTAG_FAXFILLFUNC G3/G4 R/W bitmap fill function +TIFFTAG_JPEGQUALITY JPEG R/W compression quality control +TIFFTAG_JPEGCOLORMODE JPEG R/W control colorspace conversions +TIFFTAG_JPEGTABLESMODE JPEG R/W control contents of \fIJPEGTables\fP tag +TIFFTAG_ZIPQUALITY Deflate R/W compression quality level +TIFFTAG_PIXARLOGDATAFMT PixarLog R/W user data format +TIFFTAG_PIXARLOGQUALITY PixarLog R/W compression quality level +TIFFTAG_SGILOGDATAFMT SGILog R/W user data format +.fi +.TP +.B TIFFTAG_FAXMODE +Control the operation of the Group 3 codec. +Possible values (independent bits that can be combined by +or'ing them together) are: +FAXMODE_CLASSIC +(enable old-style format in which the +.SM RTC +is written at the end of the last strip), +FAXMODE_NORTC +(opposite of +FAXMODE_CLASSIC; +also called +FAXMODE_CLASSF), +FAXMODE_NOEOL +(do not write +.SM EOL +codes at the start of each row of data), +FAXMODE_BYTEALIGN +(align each encoded row to an 8-bit boundary), +FAXMODE_WORDALIGN +(align each encoded row to an 16-bit boundary), +The default value is dependent on the compression scheme; this +pseudo-tag is used by the various G3 and G4 codecs to share code. +.TP +.B TIFFTAG_FAXFILLFUNC +Control the function used to convert arrays of black and white +runs to packed bit arrays. +This hook can be used to image decoded scanlines in multi-bit +depth rasters (e.g. for display in colormap mode) +or for other purposes. +The default value is a pointer to a builtin function that images +packed bilevel data. +.TP +.B TIFFTAG_IPTCNEWSPHOTO +Tag contaings image metadata per the IPTC newsphoto spec: Headline, +captioning, credit, etc... Used by most wire services. +.TP +.B TIFFTAG_PHOTOSHOP +Tag contains Photoshop captioning information and metadata. Photoshop +uses in parallel and redundantly alongside IPTCNEWSPHOTO information. +.TP +.B TIFFTAG_JPEGQUALITY +Control the compression quality level used in the baseline algorithm. +Note that quality levels are in the range 0-100 with a default value of 75. +.TP +.B TIFFTAG_JPEGCOLORMODE +Control whether or not conversion is done between +RGB and YCbCr colorspaces. +Possible values are: +JPEGCOLORMODE_RAW +(do not convert), and +JPEGCOLORMODE_RGB +(convert to/from RGB) +The default value is JPEGCOLORMODE_RAW. +.TP +.B TIFFTAG_JPEGTABLESMODE +Control the information written in the +.I JPEGTables +tag. +Possible values (independent bits that can be combined by +or'ing them together) are: +JPEGTABLESMODE_QUANT +(include quantization tables), +and +JPEGTABLESMODE_HUFF +(include Huffman encoding tables). +The default value is JPEGTABLESMODE_QUANT|JPEGTABLESMODE_HUFF. +.TP +.B TIFFTAG_ZIPQUALITY +Control the compression technique used by the Deflate codec. +Quality levels are in the range 1-9 with larger numbers yielding better +compression at the cost of more computation. +The default quality level is 6 which yields a good time-space tradeoff. +.TP +.B TIFFTAG_PIXARLOGDATAFMT +Control the format of user data passed +.I in +to the PixarLog codec when encoding and passed +.I out +from when decoding. +Possible values are: +PIXARLOGDATAFMT_8BIT +for 8-bit unsigned pixels, +PIXARLOGDATAFMT_8BITABGR +for 8-bit unsigned ABGR-ordered pixels, +PIXARLOGDATAFMT_11BITLOG +for 11-bit log-encoded raw data, +PIXARLOGDATAFMT_12BITPICIO +for 12-bit PICIO-compatible data, +PIXARLOGDATAFMT_16BIT +for 16-bit signed samples, +and +PIXARLOGDATAFMT_FLOAT +for 32-bit IEEE floating point samples. +.TP +.B TIFFTAG_PIXARLOGQUALITY +Control the compression technique used by the PixarLog codec. +This value is treated identically to TIFFTAG_ZIPQUALITY; see the +above description. +.TP +.B TIFFTAG_SGILOGDATAFMT +Control the format of client data passed +.I in +to the SGILog codec when encoding and passed +.I out +from when decoding. +Possible values are: +SGILOGDATAFMT_FLTXYZ +for converting between LogLuv and 32-bit IEEE floating valued XYZ pixels, +SGILOGDATAFMT_16BITLUV +for 16-bit encoded Luv pixels, +SGILOGDATAFMT_32BITRAW and SGILOGDATAFMT_24BITRAW +for no conversion of data, +SGILOGDATAFMT_8BITRGB +for returning 8-bit RGB data (valid only when decoding LogLuv-encoded data), +SGILOGDATAFMT_FLTY +for converting between LogL and 32-bit IEEE floating valued Y pixels, +SGILOGDATAFMT_16BITL +for 16-bit encoded L pixels, +and +SGILOGDATAFMT_8BITGRY +for returning 8-bit greyscale data +(valid only when decoding LogL-encoded data). +.SH DIAGNOSTICS +All error messages are directed through the +.IR TIFFError +routine. +By default messages are directed to +.B stderr +in the form: +.IR "module: message\en." +Warning messages are likewise directed through the +.IR TIFFWarning +routine. +.SH "SEE ALSO" +.BR fax2tiff (1), +.BR gif2tiff (1), +.BR pal2rgb (1), +.BR ppm2tiff (1), +.BR rgb2ycbcr (1), +.BR ras2tiff (1), +.BR raw2tiff (1), +.BR sgi2tiff (1), +.BR tiff2bw (1), +.BR tiffdither (1), +.BR tiffdump (1), +.BR tiffcp (1), +.BR tiffcmp (1), +.BR tiffgt (1), +.BR tiffinfo (1), +.BR tiffmedian (1), +.BR tiffsplit (1), +.BR tiffsv (1). +.PP +.BR "Tag Image File Format Specification \(em Revision 6.0" , +an Aldus Technical Memorandum. +.PP +.BR "The Spirit of TIFF Class F" , +an appendix to the TIFF 5.0 specification prepared by Cygnet Technologies. +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ +.SH BUGS +The library does not support multi-sample images +where some samples have different bits/sample. +.PP +The library does not support random access to compressed data +that is organized with more than one row per tile or strip. diff --git a/src/SDL2/external/tiff-4.0.3/man/pal2rgb.1 b/src/SDL2/external/tiff-4.0.3/man/pal2rgb.1 new file mode 100644 index 000000000..0ac2e5af4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/pal2rgb.1 @@ -0,0 +1,111 @@ +.\" $Id: pal2rgb.1,v 1.3 2005-11-02 11:07:19 dron Exp $ +.\" +.\" Copyright (c) 1990-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH PAL2RGB 1 "September 20, 2005" "libtiff" +.SH NAME +pal2rgb \- convert a palette color +.SM TIFF +image to a full color image +.SH SYNOPSIS +.B pal2rgb +[ +.I options +] +.I input.tif +.I output.tif +.SH DESCRIPTION +.I Pal2rgb +converts a palette color +.SM TIFF +image to a full color image by +applying the colormap of the palette image to each sample +to generate a full color +.SM RGB +image. +.SH OPTIONS +Options that affect the interpretation of input data are: +.TP +.B \-C +This option overrides the default behavior of +.I pal2rgb +in determining whether or not +colormap entries contain 16-bit or 8-bit values. +By default the colormap is inspected and +if no colormap entry greater than 255 is found, +the colormap is assumed to have only 8-bit values; otherwise +16-bit values (as required by the +.SM TIFF +specification) are assumed. +The +.B \-C +option can be used to explicitly specify the number of +bits for colormap entries: +.B "\-C 8" +for 8-bit values, +.B "\-C 16" +for 16-bit values. +.PP +Options that affect the output file format are: +.TP +.B \-p +Explicitly select the planar configuration used in organizing +data samples in the output image: +.B "\-p contig" +for samples packed contiguously, and +.B "\-p separate" +for samples stored separately. +By default samples are packed. +.TP +.B \-c +Use the specific compression algorithm to encoded image data +in the output file: +.B "\-c packbits" +for Macintosh Packbits, +.B "\-c lzw" +for Lempel-Ziv & Welch, +.B "\-c zip" +for Deflate, +.B "\-c none" +for no compression. +If no compression-related option is specified, the input +file's compression algorithm is used. +.TP +.B \-r +Explicitly specify the number of rows in each strip of the +output file. +If the +.B \-r +option is not specified, a number is selected such that each +output strip has approximately 8 kilobytes of data in it. +.SH BUGS +Only 8-bit images are handled. +.SH "SEE ALSO" +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiffmedian (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/ppm2tiff.1 b/src/SDL2/external/tiff-4.0.3/man/ppm2tiff.1 new file mode 100644 index 000000000..882fd0451 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/ppm2tiff.1 @@ -0,0 +1,105 @@ +.\" $Id: ppm2tiff.1,v 1.5 2006-03-01 11:20:33 dron Exp $ +.\" +.\" Copyright (c) 1991-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH PPM2TIFF 1 "March 1, 2006" "libtiff" +.SH NAME +ppm2tiff \- create a +.SM TIFF +file from +.SM PPM, PGM +and +.SM PBM +image files +.SH SYNOPSIS +.B ppm2tiff +[ +.I options +] [ +.I input.ppm +] +.I output.tif +.SH DESCRIPTION +.I ppm2tiff +converts a file in the +.SM PPM, PGM +and +.SM PBM +image formats to +.SM TIFF. +By default, the +.SM TIFF +image is created with data samples packed (\c +.IR PlanarConfiguration =1), +compressed with the Packbits algorithm (\c +.IR Compression =32773), +and with each strip no more than 8 kilobytes. These characteristics can be +overridden, or explicitly specified with the options described below +.PP +If the +.SM PPM +file contains greyscale data, then the +.I PhotometricInterpretation +tag is set to 1 (min-is-black), otherwise it is set to 2 (RGB). +.PP +If no +.SM PPM +file is specified on the command line, +.I ppm2tiff +will read from the standard input. +.SH OPTIONS +.TP +.B \-c +Specify a compression scheme to use when writing image data: +.B none +for no compression, +.B packbits +for PackBits compression (will be used by default), +.B lzw +for Lempel-Ziv & Welch compression, +.B jpeg +for baseline JPEG compression, +.B zip +for Deflate compression, +.B g3 +for CCITT Group 3 (T.4) compression, +and +.B g4 +for CCITT Group 4 (T.6) compression. +.TP +.B \-r +Write data with a specified number of rows per strip; by default the number of +rows/strip is selected so that each strip is approximately 8 kilobytes. +.TP +.B \-R +Mark the resultant image to have the specified X and Y resolution (in +dots/inch). +.SH "SEE ALSO" +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiffmedian (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/ras2tiff.1 b/src/SDL2/external/tiff-4.0.3/man/ras2tiff.1 new file mode 100644 index 000000000..0c78ddb62 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/ras2tiff.1 @@ -0,0 +1,96 @@ +.\" $Id: ras2tiff.1,v 1.4 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 1990-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH RAS2TIFF 1 "November 2, 2005" "libtiff" +.SH NAME +ras2tiff \- create a +.SM TIFF +file from a Sun rasterfile +.SH SYNOPSIS +.B ras2tiff +[ +.I options +] +.I input.ras +.I output.tif +.SH DESCRIPTION +.I ras2tiff +converts a file in the Sun rasterfile format to +.SM TIFF. +By default, the +.SM TIFF +image is created with data samples packed (\c +.IR PlanarConfiguration =1), +compressed with the Lempel-Ziv & Welch algorithm (\c +.IR Compression =5), +and with each strip no more than 8 kilobytes. +These characteristics can overridden, or explicitly specified +with the options described below. +.PP +Any colormap information in the rasterfile is carried over to the +.SM TIFF +file by including a +.I Colormap +tag in the output file. +If the rasterfile has a colormap, the +.I PhotometricInterpretation +tag is set to 3 (palette); +otherwise it is set to 2 (RGB) if the depth +is 24 or 1 (min-is-black) if the depth is not 24. +.SH OPTIONS +.TP +.B \-c +Specify a compression scheme to use when writing image data: +.B "\-c none" +for no compression, +.B "\-c packbits" +for the PackBits compression algorithm, +.B "\-c jpeg" +for the baseline JPEG compression algorithm, +.B "\-c zip +for the Deflate compression algorithm, +and +.B "\-c lzw" +for Lempel-Ziv & Welch (the default). +.TP +.B \-r +Write data with a specified number of rows per strip; +by default the number of rows/strip is selected so that each strip +is approximately 8 kilobytes. +.SH BUGS +Does not handle all possible rasterfiles. +In particular, +.I ras2tiff +does not handle run-length encoded images. +.SH "SEE ALSO" +.BR pal2rgb (1), +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiffmedian (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ + diff --git a/src/SDL2/external/tiff-4.0.3/man/raw2tiff.1 b/src/SDL2/external/tiff-4.0.3/man/raw2tiff.1 new file mode 100644 index 000000000..3e832df28 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/raw2tiff.1 @@ -0,0 +1,196 @@ +.\" $Id: raw2tiff.1,v 1.7 2009-08-24 19:13:40 bfriesen Exp $ +.\" +.\" Copyright (c) 1990-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH RAW2TIFF 1 "November 2, 2005" "libtiff" +.SH NAME +raw2tiff \- create a +.SM TIFF +file from a raw data +.SH SYNOPSIS +.B raw2tiff +[ +.I options +] +.I input.raw +.I output.tif +.SH DESCRIPTION +.I raw2tiff +converts a raw byte sequence into +.SM TIFF. +By default, the +.SM TIFF +image is created with data samples packed (\c +.IR PlanarConfiguration =1), +compressed with the PackBits algorithm (\c +.IR Compression =32773), +and with each strip no more than 8 kilobytes. +These characteristics can overridden, or explicitly specified +with the options described below. +.SH OPTIONS +.TP +.BI \-H " number" +size of input image file header in bytes (0 by default). This amount of data +just will be skipped from the start of file while reading. +.TP +.BI \-w " number" +width of input image in pixels (can be guessed, see +.SM +.B "GUESSING THE IMAGE GEOMETRY" +below). +.TP +.BI \-l " number" +length of input image in lines (can be guessed, see +.SM +.B "GUESSING THE IMAGE GEOMETRY" +below). +.TP +.BI \-b " number" +number of bands in input image (1 by default). +.TP +.BI \-d " data_type" +type of samples in input image, where +.I data_type +may be: +.ta \w'\fBdouble \fR'u +.br +.B byte\t +8-bit unsigned integer (default), +.br +.B short\t +16-bit unsigned integer, +.br +.B long\t +32-bit unsigned integer, +.br +.B sbyte\t +8-bit signed integer, +.br +.B sshort\t +16-bit signed integer, +.br +.B slong\t +32-bit signed integer, +.br +.B float\t +32-bit IEEE floating point, +.br +.B double\t +64-bit IEEE floating point. +.TP +.BI \-i " config" +type of samples interleaving in input image, where +.I config +may be: +.ta \w'\fBpixel \fR'u +.br +.B pixel\t +pixel interleaved data (default), +.br +.B band\t +band interleaved data. +.TP +.BI \-p " photo" +photometric interpretation (color space) of the input image, where +.I photo +may be: +.ta \w'\fBminiswhite \fR'u +.br +.B miniswhite\t +white color represented with 0 value, +.br +.B minisblack\t +black color represented with 0 value (default), +.br +.B rgb\t +image has RGB color model, +.br +.B cmyk\t +image has CMYK (separated) color model, +.br +.B ycbcr\t +image has YCbCr color model, +.br +.B cielab\t +image has CIE L*a*b color model, +.br +.B icclab\t +image has ICC L*a*b color model, +.br +.B itulab\t +image has ITU L*a*b color model. +.TP +.B \-s +swap bytes fetched from the input file. +.TP +.B \-L +input data has LSB2MSB bit order (default). +.TP +.B \-M +input data has MSB2LSB bit order. +.TP +.B \-c +Specify a compression scheme to use when writing image data: +.B "\-c none" +for no compression, +.B "\-c packbits" +for the PackBits compression algorithm (the default), +.B "\-c jpeg" +for the baseline JPEG compression algorithm, +.B "\-c zip" +for the Deflate compression algorithm, +and +.B "\-c lzw" +for Lempel-Ziv & Welch. +.TP +.BI \-r " number" +Write data with a specified number of rows per strip; +by default the number of rows/strip is selected so that each strip +is approximately 8 kilobytes. +.SH GUESSING THE IMAGE GEOMETRY +.I raw2tiff +can guess image width and height in case one or both of these parameters are +not specified. If you omit one of those parameters, the complementary one will +be calculated based on the file size (taking into account header size, number +of bands and data type). If you omit both parameters, the statistical approach +will be used. Utility will compute correlation coefficient between two lines +at the image center using several appropriate line sizes and the highest +absolute value of the coefficient will indicate the right line size. That is +why you should be cautious with the very large images, because guessing +process may take a while (depending on your system performance). Of course, the +utility can't guess the header size, number of bands and data type, so it +should be specified manually. If you don't know anything about your image, +just try with the several combinations of those options. +.P +There is no magic, it is just a mathematical statistics, so it can be wrong +in some cases. But for most ordinary images guessing method will work fine. +.SH "SEE ALSO" +.BR pal2rgb (1), +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiffmedian (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/rgb2ycbcr.1 b/src/SDL2/external/tiff-4.0.3/man/rgb2ycbcr.1 new file mode 100644 index 000000000..01a332ca0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/rgb2ycbcr.1 @@ -0,0 +1,99 @@ +.\" $Header: /cvs/maptools/cvsroot/libtiff/man/rgb2ycbcr.1,v 1.4 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 1991-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH RGB2YCBCR 1 "November 2, 2005" "libtiff" +.SH NAME +rgb2ycbcr \- convert non-YCbCr +.SM TIFF +images to a YCbCr +.SM TIFF +image +.SH SYNOPSIS +.B rgb2ycbcr +[ +.I options +] +.I "src1.tif src2.tif ... dst.tif" +.SH DESCRIPTION +.I rgb2ycbcr +converts +.SM RGB +color, greyscale, or bi-level +.SM TIFF +images to YCbCr images by transforming and sampling pixel data. If multiple +files are specified on the command line each source file is converted to a +separate directory in the destination file. +.PP +By default, chrominance samples are created by sampling +2 by 2 blocks of luminance values; this can be changed with the +.B \-h +and +.B \-v +options. +Output data are compressed with the +.SM PackBits +compression scheme, by default; an alternate scheme can be selected with the +.B \-c +option. +By default, output data are compressed in strips with +the number of rows in each strip selected so that the +size of a strip is never more than 8 kilobytes; +the +.B \-r +option can be used to explicitly set the number of +rows per strip. +.SH OPTIONS +.TP +.B \-c +Specify a compression scheme to use when writing image data: +.B "\-c none" +for no compression, +.B "\-c packbits" +for the PackBits compression algorithm (the default), +.B "\-c jpeg" +for the JPEG compression algorithm, +.B "\-c zip" +for the deflate compression algorithm, +and +.B "\-c lzw" +for Lempel-Ziv & Welch. +.TP +.B \-h +Set the horizontal sampling dimension to one of: 1, 2 (default), or 4. +.TP +.B \-r +Write data with a specified number of rows per strip; +by default the number of rows/strip is selected so that each strip +is approximately 8 kilobytes. +.TP +.B \-v +Set the vertical sampling dimension to one of: 1, 2 (default), or 4. +.SH "SEE ALSO" +.BR tiffinfo (1), +.BR tiffcp (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff diff --git a/src/SDL2/external/tiff-4.0.3/man/sgi2tiff.1 b/src/SDL2/external/tiff-4.0.3/man/sgi2tiff.1 new file mode 100644 index 000000000..650adb3cc --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/sgi2tiff.1 @@ -0,0 +1,93 @@ +.\" $Id: sgi2tiff.1,v 1.4 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 1991-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH SGI2TIFF 1 "November 2, 2005" "libtiff" +.SH NAME +sgi2tiff \- create a +.SM TIFF +file from an +.SM SGI +image file +.SH SYNOPSIS +.B sgi2tiff +[ +.I options +] +.I input.rgb +.I output.tif +.SH DESCRIPTION +.I sgi2tiff +converts a file in the +.SM SGI +image format to +.SM TIFF. +By default, the +.SM TIFF +image is created with data samples packed (\c +.IR PlanarConfiguration =1), +compressed with the Lempel-Ziv & Welch algorithm (\c +.IR Compression =5), +and with each strip no more than 8 kilobytes. +These characteristics can overridden, or explicitly specified +with the options described below. +.SH OPTIONS +.TP +.B \-c +Specify a compression scheme to use when writing image data: +.B "\-c none" +for no compression, +.B "\-c packbits" +for the PackBits compression algorithm), +.B "\-c jpeg" +for the baseline JPEG compression algorithm, +.B "\-c zip +for the Deflate compression algorithm, +and +.B "\-c lzw" +for Lempel-Ziv & Welch (the default). +.TP +.B \-p +Explicitly select the planar configuration used in organizing +data samples in the output image: +.B "\-p contig" +for samples packed contiguously, and +.B "\-p separate" +for samples stored separately. +By default samples are packed. +.TP +.B \-r +Write data with a specified number of rows per strip; +by default the number of rows/strip is selected so that each strip +is approximately 8 kilobytes. +.SH BUGS +Does not record colormap information. +.SH "SEE ALSO" +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiffmedian (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/thumbnail.1 b/src/SDL2/external/tiff-4.0.3/man/thumbnail.1 new file mode 100644 index 000000000..f4172bb6f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/thumbnail.1 @@ -0,0 +1,90 @@ +.\" $Id: thumbnail.1,v 1.2 2005-11-02 11:07:19 dron Exp $ +.\" +.\" Copyright (c) 1994-1997 Sam Leffler +.\" Copyright (c) 1994-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH THUMBNAIL 1 "November 2, 2005" "libtiff" +.SH NAME +thumbnail \- create a +.SM TIFF +file with thumbnail images +.SH SYNOPSIS +.B thumbnail +[ +.I options +] +.I input.tif +.I output.tif +.SH DESCRIPTION +.I thumbnail +is a program written to show how one might use the +SubIFD tag (#330) to store thumbnail images. +.I thumbnail +copies a +.SM TIFF +Class F facsimile file to the output file +and for each image an 8-bit greyscale +.IR "thumbnail sketch" . +The output file contains the thumbnail image with the associated +full-resolution page linked below with the SubIFD tag. +.PP +By default, thumbnail images are 216 pixels wide by 274 pixels high. +Pixels are calculated by sampling and filtering the input image +with each pixel value passed through a contrast curve. +.SH OPTIONS +.TP +.B \-w +Specify the width of thumbnail images in pixels. +.TP +.B \-h +Specify the height of thumbnail images in pixels. +.TP +.B \-c +Specify a contrast curve to apply in generating the thumbnail images. +By default pixels values are passed through a linear contrast curve +that simply maps the pixel value ranges. +Alternative curves are: +.B exp50 +for a 50% exponential curve, +.B exp60 +for a 60% exponential curve, +.B exp70 +for a 70% exponential curve, +.B exp80 +for a 80% exponential curve, +.B exp90 +for a 90% exponential curve, +.B exp +for a pure exponential curve, +.B linear +for a linear curve. +.SH BUGS +There are no options to control the format of the saved thumbnail images. +.SH "SEE ALSO" +.BR tiffdump (1), +.BR tiffgt (1), +.BR tiffinfo (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiff2bw.1 b/src/SDL2/external/tiff-4.0.3/man/tiff2bw.1 new file mode 100644 index 000000000..ccbe7e8fa --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiff2bw.1 @@ -0,0 +1,94 @@ +.\" $Id: tiff2bw.1,v 1.3 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFF2BW 1 "November 2, 2005" "libtiff" +.SH NAME +tiff2bw \- convert a color +.SM TIFF +image to greyscale +.SH SYNOPSIS +.B tiff2bw +[ +.I options +] +.I input.tif +.I output.tif +.SH DESCRIPTION +.I Tiff2bw +converts an +.SM RGB +or Palette color +.SM TIFF +image to a greyscale image by +combining percentages of the red, green, and blue channels. +By default, output samples are created by taking +28% of the red channel, 59% of the green channel, and 11% of +the blue channel. +To alter these percentages, the +.BR \-R , +.BR \-G , +and +.BR \-B +options may be used. +.SH OPTIONS +.TP +.B \-c +Specify a compression scheme to use when writing image data: +.B "\-c none" +for no compression, +.B "\-c packbits" +for the PackBits compression algorithm, +.B "\-c zip +for the Deflate compression algorithm, +.B "\-c g3 +for the CCITT Group 3 compression algorithm, +.B "\-c g4 +for the CCITT Group 4 compression algorithm, +and +.B "\-c lzw" +for Lempel-Ziv & Welch (the default). +.TP +.B \-r +Write data with a specified number of rows per strip; +by default the number of rows/strip is selected so that each strip +is approximately 8 kilobytes. +.TP +.B \-R +Specify the percentage of the red channel to use (default 28). +.TP +.B \-G +Specify the percentage of the green channel to use (default 59). +.TP +.B \-B +Specify the percentage of the blue channel to use (default 11). +.SH "SEE ALSO" +.BR pal2rgb (1), +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiffmedian (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiff2pdf.1 b/src/SDL2/external/tiff-4.0.3/man/tiff2pdf.1 new file mode 100644 index 000000000..ba670cfba --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiff2pdf.1 @@ -0,0 +1,254 @@ +.\" $Id: tiff2pdf.1,v 1.7 2010-12-11 22:47:49 faxguy Exp $ +.\" +.\" Copyright (c) 2003 Ross Finlayson +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the name of +.\" Ross Finlayson may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Ross Finlayson. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL ROSS FINLAYSON BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.\" Process this file with +.\" groff -man -Tascii tiff2pdf.1 +.\" +.TH TIFF2PDF 1 "April 20, 2006" "libtiff" +.SH NAME +tiff2pdf \- convert a TIFF image to a PDF document +.SH SYNOPSIS +.B tiff2pdf +[ +.I options +] +.I input.tiff +.SH DESCRIPTION +.I tiff2pdf +opens a TIFF image and writes a PDF document to standard output. +.PP +The program converts one TIFF file to one PDF file, including multiple page +TIFF files, tiled TIFF files, black and white. grayscale, and color TIFF +files that contain data of TIFF photometric interpretations of bilevel, +grayscale, RGB, YCbCr, CMYK separation, and ICC L*a*b* as supported by +.I libtiff +and PDF. +.PP +If you have multiple TIFF files to convert into one PDF file then use +.I tiffcp +or other program to concatenate the files into a multiple page TIFF file. +If the input TIFF file is of huge dimensions (greater than 10000 pixels height +or width) convert the input image to a tiled TIFF if it is not already. +.PP +The standard output is standard output. Set the output file name with the +.BI \-o " output.pdf" +option. +.PP +All black and white files are compressed into a single strip CCITT G4 Fax +compressed PDF, unless tiled, where tiled black and white images are +compressed into tiled CCITT G4 Fax compressed PDF, +.I libtiff +CCITT support is assumed. +.PP +Color and grayscale data can be compressed using either JPEG compression, +ITU-T T.81, or Zip/Deflate LZ77 compression. Set the compression type using +the +.B \-j +or +.B \-z +options. JPEG compression support +requires that +.I libtiff +be configured with JPEG support, and Zip/Deflate compression support requires +that +.I libtiff +be configured with Zip support, in tiffconf.h. Use only one or the other of +.B \-j +and +.B \-z. +.PP +If the input TIFF contains single strip CCITT G4 Fax compressed information, +then that is written to the PDF file without transcoding, unless the options +of no compression and no passthrough are set, +.B \-d +and +.B \-n. +.PP +If the input TIFF contains JPEG or single strip Zip/Deflate compressed +information, and they are configured, then that is written to the PDF file +without transcoding, unless the options of no compression and no passthrough +are set. +.PP +The default page size upon which the TIFF image is placed is determined by +the resolution and extent of the image data. Default values for the TIFF +image resolution can be set using the +.B \-x +and +.B \-y +options. The page size can be set using the +.B \-p +option for paper size, or +.B \-w +and +.B \-l +for paper width and length, then each page of the TIFF image is centered on +its page. The distance unit for default resolution and page width and +length can be set by the +.B \-u +option, the default unit is inch. +.PP +Various items of the output document information can be set with the +.BR \-e , +.BR \-c , +.BR \-a , +.BR \-t , +.BR \-s , +and +.B \-k +options. Setting the argument of the option to "" for these +tags causes the relevant document information field to be not written. Some +of the document information values otherwise get their information from the +input TIFF image, the software, author, document name, and image description. +.PP +The Portable Document Format (PDF) specification is copyrighted by Adobe +Systems, Incorporated. +.SH OPTIONS +.TP +.BI \-o " output-file" +Set the output to go to file. +.I output-file +.TP +.B \-j +Compress with JPEG (requires +.I libjpeg +configured with +.IR libtiff ). +.TP +.B \-z +Compress with Zip/Deflate (requires +.I zlib +configured with +.IR libtiff ). +.TP +.BI \-q " quality" +Set the compression quality, 1-100 for JPEG. +.TP +.B \-n +Do not allow data to be converted without uncompressing, no compressed +data passthrough. +.TP +.BI \-b +Set PDF ``Interpolate'' user preference. +.TP +.B \-d +Do not compress (decompress). +.TP +.B \-i +Invert colors. +.TP +.BI \-p " paper-size" +Set paper size, e.g., +.BR letter , +.BR legal , +.BR A4 . +.TP +.B \-F +Cause the tiff to fill the PDF page. +.TP +.BR \-u " [" i | m ] +Set distance unit, +.B i +for inch, +.B m +for centimeter. +.TP +.BI \-w " width" +Set width in units. +.TP +.BI \-l " length" +Set length in units. +.TP +.BI \-x " xres" +Set x/width resolution default. +.TP +.BI \-y " yres" +Set y/length resolution default. +.TP +.BR \-r " [" d | o ] +Set +.B d +for resolution default for images without resolution, +.B o +for resolution override for all images. +.TP +.BI \-f +Set PDF ``Fit Window'' user preference. +.TP +.BI \-e " YYYYMMDDHHMMSS" +Set document information date, overrides image or current date/time default, +.I YYYYMMDDHHMMSS. +.TP +.BI \-c " creator" +Set document information creator, overrides image software default. +.TP +.BI \-a " author" +Set document information author, overrides image artist default. +.TP +.BI \-t " title" +Set document information title, overrides image document name default. +.TP +.BI \-s " subject" +Set document information subject, overrides image image description default. +.TP +.BI \-k " keywords" +Set document information keywords. +.TP +.B \-h +List usage reminder to stderr and exit. +.SH EXAMPLES +.TP +The following example would generate the file output.pdf from input.tiff. +.RS +.nf +tiff2pdf \-o output.pdf input.tiff +.fi +.RE +.PP +The following example would generate PDF output from input.tiff and write it +to standard output. +.RS +.nf +tiff2pdf input.tiff +.fi +.RE +.PP +The following example would generate the file output.pdf from input.tiff, +putting the image pages on a letter sized page, compressing the output +with JPEG, with JPEG quality 75, setting the title to ``Document'', and setting +the ``Fit Window'' option. +.RS +.nf +tiff2pdf \-p letter \-j \-q 75 \-t "Document" \-f \-o output.pdf input.tiff +.fi +.RE +.SH BUGS +Please report bugs via the web interface at +.IP +\%http://bugzilla.remotesensing.org/enter_bug.cgi?product=libtiff +.SH "SEE ALSO" +.BR libtiff (3), +.BR tiffcp (1), +.BR tiff2ps (1) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiff2ps.1 b/src/SDL2/external/tiff-4.0.3/man/tiff2ps.1 new file mode 100644 index 000000000..c3a9bacf6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiff2ps.1 @@ -0,0 +1,273 @@ +.\" $Id: tiff2ps.1,v 1.10 2009-01-12 02:05:19 bfriesen Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.ds Ps PostScript +.if n .po 0 +.TH TIFF2PS 1 "November 2, 2005" "libtiff" +.SH NAME +tiff2ps \- convert a +.SM TIFF +image to \*(Ps\*(Tm +.SH SYNOPSIS +.B tiff2ps +[ +.I options +] +.I "input.tif ..." +.SH DESCRIPTION +.I tiff2ps +reads +.SM TIFF +images and writes \*(Ps or Encapsulated \*(Ps (EPS) +on the standard output. +By default, +.I tiff2ps +writes Encapsulated \*(Ps for the first image in the specified +.SM TIFF +image file. +.PP +By default, +.I tiff2ps +will generate \*(Ps that fills a printed area specified +by the +.SM TIFF +tags in the input file. +If the file does not contain +.I XResolution +or +.I YResolution +tags, then the printed area is set according to the image dimensions. +The +.B \-w +and +.B \-h +options (see below) +can be used to set the dimensions of the printed area in inches; +overriding any relevant +.SM TIFF +tags. +.PP +The \*(Ps generated for +.SM RGB, +palette, and +.SM CMYK +images uses the +.I colorimage +operator. +The \*(Ps generated for +greyscale and bilevel images +uses the +.I image +operator. +When the +.I colorimage +operator is used, \*(Ps code to emulate this operator +on older \*(Ps printers is also generated. +Note that this emulation code can be very slow. +.PP +Color images with associated alpha data are composited over +a white background. +.SH OPTIONS +.TP +.B \-1 +Generate \*(Ps Level 1 (the default). +.TP +.B \-2 +Generate \*(Ps Level 2. +.TP +.B \-3 +Generate \*(Ps Level 3. It basically allows one to use the /flateDecode +filter for ZIP compressed TIFF images. +.TP +.B \-a +Generate output for all IFDs (pages) in the input file. +.TP +.B \-b +Specify the bottom margin for the output (in inches). This does not affect +the height of the printed image. +.TP +.B \-c +Center the image in the output. This option only shows an effect if both +the +.B \-w +and the +.B \-h +option are given. +.TP +.B \-d +Set the initial +.SM TIFF +directory to the specified directory number. +(NB: Directories are numbered starting at zero.) +This option is useful for selecting individual pages in a +multi-page (e.g. facsimile) file. +.TP +.B \-e +Force the generation of Encapsulated \*(Ps (implies +.BR \-z ). +.TP +.B \-h +Specify the vertical size of the printed area (in inches). +.TP +.B \-H +Specify the maximum height of image (in inches). Images with larger sizes will +be split in several pages. Option +.B \-L +may be used for specifying size of split images overlapping. +.TP +.B \-W +Specify the maximum width of image (in inches). Images with larger sizes will +be split in several pages. Options +.B \-L +and +.B \-W +are mutually exclusive. +.B \-i +Enable/disable pixel interpolation. This option requires a +single numeric value: zero to disable pixel interpolation and +non-zero to enable. The default is enabled. +.TP +.B \-L +Specify the size of overlapping for split images (in inches). Used in +conjunction with +.B \-H +option and +.B \-W +option. +.TP +.B \-l +Specify the left margin for the output (in inches). This does not affect +the width of the printed image. +.TP +.B \-m +Where possible render using the +.I imagemask +\*(Ps operator instead of the +.I image +operator. When this option is specified +.I tiff2ps +will use +.I imagemask +for rendering 1 bit deep images. If this option is not specified +or if the image depth is greater than 1 then the +.I image +operator is used. +.TP +.B \-o +Set the initial +.SM TIFF +directory to the +.SM IFD +at the specified file offset. +This option is useful for selecting thumbnail images and the +like which are hidden using the +.I SubIFD +tag. +.TP +.B \-p +Force the generation of (non-Encapsulated) \*(Ps. +.TP +.B \-r 90|180|270|auto +Rotate image by 90, 180, 270 degrees or auto. Auto picks the best +fit for the image on the specified paper size (eg portrait +or landscape) if -h or -w is specified. Rotation is in degrees +counterclockwise. Auto rotates 90 degrees ccw to produce landscape. +.TP +.B \-s +Generate output for a single IFD (page) in the input file. +.TP +.B \-w +Specify the horizontal size of the printed area (in inches). +.TP +.B \-x +Override resolution units specified in the TIFF as centimeters. +.TP +.B \-y +Override resolution units specified in the TIFF as inches. +.TP +.B \-z +When generating \*(Ps Level 2, data is scaled so that it does not +image into the +.I deadzone +on a page (the outer margin that the printing device is unable to mark). +This option suppresses this behavior. +When \*(Ps Level 1 is generated, data is imaged to the entire printed +page and this option has no affect. +.SH EXAMPLES +The following generates \*(Ps Level 2 for all pages of a facsimile: +.RS +.nf +tiff2ps \-a2 fax.tif | lpr +.fi +.RE +Note also that if you have version 2.6.1 or newer of Ghostscript then you +can efficiently preview facsimile generated with the above command. +.PP +To generate Encapsulated \*(Ps for a the image at directory 2 +of an image use: +.RS +.nf +tiff2ps \-d 1 foo.tif +.fi +.RE +(Notice that directories are numbered starting at zero.) +.PP +If you have a long image, it may be split in several pages: +.RS +.nf +tiff2ps \-h11 \-w8.5 \-H14 \-L.5 foo.tif > foo.ps +.fi +.RE +The page size is set to 8.5x11 by +.B \-w +and +.B \-h +options. We will accept a small amount of vertical compression, so +.B \-H +set to 14. Any pages between 11 and 14 inches will be fit onto one page. +Pages longer than 14 inches are cut off at 11 and continued on the next +page. The +.B \-L.5 +option says to repeat a half inch on the next page (to improve readability). +.SH BUGS +Because \*(Ps does not support the notion of a colormap, +8-bit palette images produce 24-bit \*(Ps images. +This conversion results in output that is six times +bigger than the original image and which takes a long time +to send to a printer over a serial line. +Matters are even worse for 4-, 2-, and 1-bit palette images. +.PP +Does not handle tiled images when generating \*(Ps Level I output. +.SH "SEE ALSO" +.BR pal2rgb (1), +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiffgt (1), +.BR tiffmedian (1), +.BR tiff2bw (1), +.BR tiffsv (1), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiff2rgba.1 b/src/SDL2/external/tiff-4.0.3/man/tiff2rgba.1 new file mode 100644 index 000000000..c55165638 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiff2rgba.1 @@ -0,0 +1,97 @@ +.\" $Id: tiff2rgba.1,v 1.4 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFF2RGBA 1 "November 2, 2005" "libtiff" +.SH NAME +tiff2rgba \- convert a +.SM TIFF +image to RGBA color space +.SH SYNOPSIS +.B tiff2rgba +[ +.I options +] +.I input.tif +.I output.tif +.SH DESCRIPTION +.I Tiff2rgba +converts a wide variety of TIFF images into an RGBA TIFF image. This +includes the ability to translate different color spaces and photometric +interpretation into RGBA, support for alpha blending, and translation +of many different bit depths into a 32bit RGBA image. +.P +Internally this program is implemented using the +.I TIFFReadRGBAImage() +function, and it suffers any limitations of that image. This includes +limited support for > 8 BitsPerSample images, and flaws with some +esoteric combinations of BitsPerSample, photometric interpretation, +block organization and planar configuration. +.P +The generated images are stripped images with four samples per pixel +(red, green, blue and alpha) or if the +.B \-n +flag is used, three samples +per pixel (red, green, and blue). The resulting images are always planar +configuration contiguous. For this reason, this program is a useful utility +for transform exotic TIFF files into a form ingestible by almost any TIFF +supporting software. +.SH OPTIONS +.TP +.B \-c +Specify a compression scheme to use when writing image data: +.B "\-c none" +for no compression (the default), +.B "\-c packbits" +for the PackBits compression algorithm, +.B "\-c zip" +for the Deflate compression algorithm, +.B "\-c jpeg" +for the JPEG compression algorithm, +and +.B "\-c lzw" +for Lempel-Ziv & Welch. +.TP +.B \-r +Write data with a specified number of rows per strip; +by default the number of rows/strip is selected so that each strip +is approximately 8 kilobytes. +.TP +.B \-b +Process the image one block (strip/tile) at a time instead of by reading +the whole image into memory at once. This may be necessary for very large +images on systems with limited RAM. +.TP +.B \-n +Drop the alpha component from the output file, producing a pure RGB file. +Currently this does not work if the +.B \-b +flag is also in effect. +.SH "SEE ALSO" +.BR tiff2bw (1), +.BR TIFFReadRGBAImage (3t), +.BR libtiff (3) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiffcmp.1 b/src/SDL2/external/tiff-4.0.3/man/tiffcmp.1 new file mode 100644 index 000000000..961d81223 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiffcmp.1 @@ -0,0 +1,87 @@ +.\" $Id: tiffcmp.1,v 1.6 2009-08-24 19:13:40 bfriesen Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFCMP 1 "November 2, 2005" "libtiff" +.SH NAME +tiffcmp \- compare two +.SM TIFF +files +.SH SYNOPSIS +.B tiffcmp +[ +.I options +] +.I "file1.tif file2.tif" +.SH DESCRIPTION +.I Tiffcmp +compares the tags and data in two files created according +to the Tagged Image File Format, Revision 6.0. +The schemes used for compressing data in each file +are immaterial when data are compared\-data are compared on +a scanline-by-scanline basis after decompression. +Most directory tags are checked; notable exceptions are: +.IR GrayResponseCurve , +.IR ColorResponseCurve , +and +.IR ColorMap +tags. +Data will not be compared if any of the +.IR BitsPerSample , +.IR SamplesPerPixel , +or +.I ImageWidth +values are not equal. +By default, +.I tiffcmp +will terminate if it encounters any difference. +.SH OPTIONS +.TP +.B \-l +List each byte of image data that differs between the files. +.TP +.BI \-z " number" +List specified number of image data bytes that differs between the files. +.TP +.B \-t +Ignore any differences in directory tags. +.SH BUGS +Tags that are not recognized by the library are not +compared; they may also generate spurious diagnostics. +.PP +The image data of tiled files is not compared, since the +.I TIFFReadScanline() +function is used. An error will be reported for tiled files. +.PP +The pixel and/or sample number reported in differences may be off +in some exotic cases. +.SH "SEE ALSO" +.BR pal2rgb (1), +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiffmedian (1), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiffcp.1 b/src/SDL2/external/tiff-4.0.3/man/tiffcp.1 new file mode 100644 index 000000000..5fdcc474d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiffcp.1 @@ -0,0 +1,306 @@ +.\" $Id: tiffcp.1,v 1.12 2010-12-23 13:38:47 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFCP 1 "February 24, 2007" "libtiff" +.SH NAME +tiffcp \- copy (and possibly convert) a +.SM TIFF +file +.SH SYNOPSIS +.B tiffcp +[ +.I options +] +.I "src1.tif ... srcN.tif dst.tif" +.SH DESCRIPTION +.I tiffcp +combines one or more files created according +to the Tag Image File Format, Revision 6.0 +into a single +.SM TIFF +file. +Because the output file may be compressed using a different +algorithm than the input files, +.I tiffcp +is most often used to convert between different compression +schemes. +.PP +By default, +.I tiffcp +will copy all the understood tags in a +.SM TIFF +directory of an input +file to the associated directory in the output file. +.PP +.I tiffcp +can be used to reorganize the storage characteristics of data +in a file, but it is explicitly intended to not alter or convert +the image data content in any way. +.SH OPTIONS +.TP +.BI \-b " image" +subtract the following monochrome image from all others +processed. This can be used to remove a noise bias +from a set of images. This bias image is typically an +image of noise the camera saw with its shutter closed. +.TP +.B \-B +Force output to be written with Big-Endian byte order. +This option only has an effect when the output file is created or +overwritten and not when it is appended to. +.TP +.B \-C +Suppress the use of ``strip chopping'' when reading images +that have a single strip/tile of uncompressed data. +.TP +.B \-c +Specify the compression to use for data written to the output file: +.B none +for no compression, +.B packbits +for PackBits compression, +.B lzw +for Lempel-Ziv & Welch compression, +.B zip +for Deflate compression, +.B lzma +for LZMA2 compression, +.B jpeg +for baseline JPEG compression, +.B g3 +for CCITT Group 3 (T.4) compression, +and +.B g4 +for CCITT Group 4 (T.6) compression. +By default +.I tiffcp +will compress data according to the value of the +.I Compression +tag found in the source file. +.IP +The +.SM CCITT +Group 3 and Group 4 compression algorithms can only +be used with bilevel data. +.IP +Group 3 compression can be specified together with several +T.4-specific options: +.B 1d +for 1-dimensional encoding, +.B 2d +for 2-dimensional encoding, +and +.B fill +to force each encoded scanline to be zero-filled so that the +terminating EOL code lies on a byte boundary. +Group 3-specific options are specified by appending a ``:''-separated +list to the ``g3'' option; e.g. +.B "\-c g3:2d:fill" +to get 2D-encoded data with byte-aligned EOL codes. +.IP +.SM LZW, Deflate +and +.SM LZMA2 +compression can be specified together with a +.I predictor +value. A predictor value of 2 causes each scanline of the output image to +undergo horizontal differencing before it is encoded; a value of 1 forces each +scanline to be encoded without differencing. A value 3 is for floating point +predictor which you can use if the encoded data are in floating point format. +LZW-specific options are specified by appending a ``:''-separated list to the +``lzw'' option; e.g. +.B "\-c lzw:2" +for +.SM LZW +compression with horizontal differencing. +.IP +.SM Deflate +and +.SM LZMA2 +encoders support various compression levels (or encoder presets) set as +character ``p'' and a preset number. ``p1'' is the fastest one with the worst +compression ratio and ``p9'' is the slowest but with the best possible ratio; +e.g. +.B "\-c zip:3:p9" +for +.SM Deflate +encoding with maximum compression level and floating point predictor. +.TP +.B \-f +Specify the bit fill order to use in writing output data. +By default, +.I tiffcp +will create a new file with the same fill order as the original. +Specifying +.B "\-f lsb2msb" +will force data to be written with the FillOrder tag set to +.SM LSB2MSB, +while +.B "\-f msb2lsb" +will force data to be written with the FillOrder tag set to +.SM MSB2LSB. +.TP +.B \-i +Ignore non-fatal read errors and continue processing of the input file. +.TP +.B \-l +Specify the length of a tile (in pixels). +.I tiffcp +attempts to set the tile dimensions so +that no more than 8 kilobytes of data appear in a tile. +.TP +.B \-L +Force output to be written with Little-Endian byte order. +This option only has an effect when the output file is created or +overwritten and not when it is appended to. +.TP +.B \-M +Suppress the use of memory-mapped files when reading images. +.TP +.B \-p +Specify the planar configuration to use in writing image data +that has one 8-bit sample per pixel. +By default, +.I tiffcp +will create a new file with the same planar configuration as +the original. +Specifying +.B "\-p contig" +will force data to be written with multi-sample data packed +together, while +.B "\-p separate" +will force samples to be written in separate planes. +.TP +.B \-r +Specify the number of rows (scanlines) in each strip of data +written to the output file. +By default (or when value +.B 0 +is specified), +.I tiffcp +attempts to set the rows/strip +that no more than 8 kilobytes of data appear in a strip. If you specify +special value +.B \-1 +it will results in infinite number of the rows per strip. The entire image +will be the one strip in that case. +.TP +.B \-s +Force the output file to be written with data organized in strips +(rather than tiles). +.TP +.B \-t +Force the output file to be written with data organized in tiles (rather than +strips). options can be used to force the resultant image to be written as +strips or tiles of data, respectively. +.TP +.B \-w +Specify the width of a tile (in pixels). +.I tiffcp +attempts to set the tile dimensions so that no more than 8 kilobytes of data +appear in a tile. +.I tiffcp +attempts to set the tile dimensions so that no more than 8 kilobytes of data +appear in a tile. +.TP +.B \-x +Force the output file to be written with PAGENUMBER value in sequence. +.TP +.BI \-,= character +substitute +.I character +for `,' in parsing image directory indices +in files. This is necessary if filenames contain commas. +Note that +.B \-,= +with whitespace immediately following will disable +the special meaning of the `,' entirely. See examples. +.SH EXAMPLES +The following concatenates two files and writes the result using +.SM LZW +encoding: +.RS +.nf +tiffcp \-c lzw a.tif b.tif result.tif +.fi +.RE +.PP +To convert a G3 1d-encoded +.SM TIFF +to a single strip of G4-encoded data the following might be used: +.RS +.nf +tiffcp \-c g4 \-r 10000 g3.tif g4.tif +.fi +.RE +(1000 is just a number that is larger than the number of rows in +the source file.) + +To extract a selected set of images from a multi-image TIFF file, the file +name may be immediately followed by a `,' separated list of image directory +indices. The first image is always in directory 0. Thus, to copy the 1st and +3rd images of image file ``album.tif'' to ``result.tif'': +.RS +.nf +tiffcp album.tif,0,2 result.tif +.fi +.RE + +A trailing comma denotes remaining images in sequence. The following command +will copy all image with except the first one: +.RS +.nf +tiffcp album.tif,1, result.tif +.fi +.RE + +Given file ``CCD.tif'' whose first image is a noise bias +followed by images which include that bias, +subtract the noise from all those images following it +(while decompressing) with the command: +.RS +.nf +tiffcp \-c none \-b CCD.tif CCD.tif,1, result.tif +.fi +.RE + +If the file above were named ``CCD,X.tif'', the +.B \-,= +option would +be required to correctly parse this filename with image numbers, +as follows: +.RS +.nf +tiffcp \-c none \-,=% \-b CCD,X.tif CCD,X%1%.tif result.tif +.SH "SEE ALSO" +.BR pal2rgb (1), +.BR tiffinfo (1), +.BR tiffcmp (1), +.BR tiffmedian (1), +.BR tiffsplit (1), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiffcrop.1 b/src/SDL2/external/tiff-4.0.3/man/tiffcrop.1 new file mode 100644 index 000000000..0423fb2f5 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiffcrop.1 @@ -0,0 +1,571 @@ +.\" $Id: tiffcrop.1,v 1.7 2010-12-12 01:45:35 faxguy Exp $ +.\" tiffcrop -- a port of tiffcp.c extended to include extended processing of images +.\" +.\" Original code: +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.\" Additional code Copyright (c) 2006-2009 Richard Nolde +.\" Lasted Updated 9/2009 +.\" .if n .po 0 +.TH "TIFFCROP" "1" "December, 2008" "libtiff" "" +.SH "NAME" +tiffcrop \- select, copy, crop, convert, extract, and/or process one or more +.SM TIFF +files. +.SH "SYNOPSIS" +.B tiffcrop +[ +.I options +] +.I "src1.tif ... srcN.tif dst.tif" +.SH "DESCRIPTION" +.I Tiffcrop +processes one or more files created according +to the Tag Image File Format, Revision 6.0, specification +into one or more +.SM TIFF +file(s). +.I Tiffcrop +is most often used to extract portions of an image for processing +with bar code recognizer or OCR software when that software cannot +restrict the region of interest to a specific portion of the image +or to improve efficiency when the regions of interest must be rotated. +It can also be used to subdivide all or part of a processed image into +smaller sections and export individual images or sections of images +as separate files or separate images within one or more files derived +from the original input image or images. +.PP +The available functions can be grouped broadly into three classes: +.IP +Those that select individual images or sections of images from the input files. +The options \-N for sequences or lists of individual images in the input files, +\-Z for zones, \-z for regions, \-X and \-Y for fixed sized selections, +\-m for margins, \-U for units, and \-E for edge reference provide a variety of +ways to specify portions of the input image. +.IP +Those that allow the individual images or selections to be exported to one or +more output files in different groupings and control the organization of the +data in the output images. The options \-P for page size grouping, \-S for +subdivision into columns and rows and \-e for export mode options that produce +one or more files from each input image. The options \-r, \-s, \-t, \-w control +strip and tile format and sizes while \-B \-L \-c \-f modify the endian addressing +scheme, the compression options, and the bit fill sequence of images as they +are written. +.IP +Those that perform some action on each image that is selected from the input file. +The options include \-R for rotate, \-I for inversion of the photometric +interpretation and/or data values, and \-F to flip (mirror) the image horizontally +or vertically. +.PP + +Functions are applied to the input image(s) in the following order: +cropping, fixed area extraction, zone and region extraction, +inversion, mirroring, rotation. +.PP +Functions are applied to the output image(s) in the following order: +export mode options for grouping zones, regions, or images into +one or more files, +.I or +row and column divisions with output margins, +.I or +page size divisions with page orientation options. +.PP +Finally, strip, tile, byte order, output resolution, and compression options are +applied to all output images. +.PP +The output file(s) may be organized and compressed using a different +algorithm from the input files. +By default, +.I tiffcrop +will copy all the understood tags in a +.SM TIFF +directory of an input file to the associated directory in the output file. +Options can be used to force the resultant image to be written as strips +or tiles of data, respectively. +.PP +.I Tiffcrop +can be used to reorganize the storage characteristics of data +in a file, and to reorganize, extract, rotate, and otherwise +process the image data as specified at the same time whereas +tiffcp does not alter the image data within the file. +.PP +Using the options for selecting individual input images and the +options for exporting images and/or segments defined as zones or +regions of each input image, +.I tiffcrop +can perform the functions of tiffcp and tiffsplit in a single pass +while applying multiple operations to individual selections or images. +.PP +.SH "OPTIONS" +.TP +.B \-h +Display the syntax summary for tiffcrop. +.TP +.B \-v +Report the current version and last modification date for tiffcrop. +.TP +.B \-N odd|even|#,#\-#,#|last +Specify one or more series or range(s) of images within each file to process. +The words +.B odd +or +.B even +may be used to specify all odd or even numbered images counting from one. +Note that internally, TIFF images are numbered from zero rather than one +but since this convention is not obvious to most users, tiffcrop used 1 +to specifiy the first image in a multipage file. The word +.B last +may be used in place of a number in the sequence to indicate the +final image in the file without knowing how many images there are. +Ranges of images may be specified with a dash and multiple sets +can be indicated by joining them in a comma\-separated list. eg. use +.B \-N 1,5\-7,last +to process the 1st, 5th through 7th, and final image in the file. +.TP +.B \-E top|bottom|left|right +Specify the top, bottom, left, or right edge as the reference from +which to calcuate the width and length of crop regions or sequence +of postions for zones. When used with the \-e option for exporting +zones or regions, the reference edge determines how composite images +are arranged. Using \-E left or right causes successive zones or +regions to be merged horizontally whereas using \-E top or bottom +causes successive zones or regions to be arranged vertically. This +option has no effect on export layout when multiple zones or regions +are not being exported to composite images. Edges may be abbreviated +to the first letter. +.TP +.B \-e combined|divided|image|multiple|separate +Specify the export mode for images and selections from input images. +The final filename on the command line is considered to be the +destination file or filename stem for automatically generated +sequences of files. Modes may be abbreviated to the first letter. +.IP +combined All images and selections are written to a single file with +multiple selections from one image combined into a single image (default) +.IP +divided All images and selections are written to a single file +with each selection from one image written to a new image +.IP +image Each input image is written to a new file (numeric filename sequence) +with multiple selections from the image combined into one image +.IP +multiple Each input image is written to a new file (numeric filename sequence) +with each selection from the image written to a new image +.IP +separate Individual selections from each image are written to separate files +.TP +.B \-U in|cm|px +Specify the type of units to apply to dimensions for margins and +crop regions for input and output images. Inches or centimeters +are converted to pixels using the resolution unit specified in the +TIFF file (which defaults to inches if not specified in the IFD). +.TP +.B \-m #,#,#,# +Specify margins to be removed from the input image. The order must +be top, left, bottom, right with only commas separating the elements +of the list. Margins are scaled according to the current units and +removed before any other extractions are computed.. +.TP +.B \-X # +Set the horizontal (X\-axis) dimension of a region to extract relative to +the specified origin reference. If the origin is the top or bottom +edge, the X axis value will be assumed to start at the left edge. +.TP +.B \-Y # +Set the vertical (Y\-axis) dimension of a region to extract relative to +the specified origin reference. If the origin is the left or right +edge, the Y axis value will be assumed to start at the top. +.TP +.B \-Z #:#,#:# +Specify zones of the image designated as position X of Y equal sized portions +measured from the reference edge, eg 1:3 would be first third of the +image starting from the reference edge minus any margins specified +for the confining edges. Multiple zones can be specified as a comma +separated list but they must reference the same edge. To extract the +top quarter and the bottom third of an image you would use +.B \-Z 1:4,3:3. +.TP +.B \-z x1,y1,x2,y2: ... :xN,yN,xN+1,yN+1 +Specify a series of coordinates to define regions for processing and exporting. +The coordinates represent the top left and lower right corners of each region +in the current units, eg inch, cm, or pixels. Pixels are counted from one to +width or height and inches or cm are calculated from image resolution data. + +Each colon delimited series of four values represents the horizontal and vertical +offsets from the top and left edges of the image, regardless of the edge specified +with the \-E option. The first and third values represent the horizontal offsets of +the corner points from the left edge while the second and fourth values represent +the vertical offsets from the top edge. +.TP +.B \-F horiz|vert +Flip, ie mirror, the image or extracted region horizontally or vertically. +.TP +.B \-R 90|180|270 +Rotate the image or extracted region 90, 180, or 270 degrees clockwise. +.TP +.B \\-I [black|white|data|both] +Invert color space, eg dark to light for bilevel and grayscale images. +This can be used to modify negative images to positive or to correct +images that have the PHOTOMETRIC_INTERPRETATIN tag set incorrectly. +If the value is black or white, the PHOTOMETRIC_INTERPRETATION tag is set to +MinIsBlack or MinIsWhite, without altering the image data. If the argument +is data or both, the data values of the image are modified. Specifying both +inverts the data and the PHOTOMETRIC_INTERPRETATION tag, whereas using data +inverts the data but not the PHOTOMETRIC_INTERPRETATION tag. +No support for modifying the color space of color images in this release. +.TP +.B \-H # +Set the horizontal resolution of output images to # +expressed in the current units. +.TP +.B \-V # +Set the vertical resolution of the output images to # +expressed in the current units. +.TP +.B \-J # +Set the horizontal margin of an output page size to # +expressed in the current units when sectioning image into columns x rows +subimages using the \-S cols:rows option. +.TP +.B \-K # +Set the vertical margin of an output page size to # +expressed in the current units when sectioning image into columns x rows +submiages using the \-S cols:rows option. +.TP +.B \-O portrait|landscape|auto +Set the output orientation of the pages or sections. +Auto will use the arrangement that requires the fewest pages. +This option is only meaningful in conjunction with the -P +option to format an image to fit on a specific paper size. +.TP +.B \-P page +Format the output images to fit on page size paper. Use +\-P list to show the supported page sizes and dimensions. +You can define a custom page size by entering the width and length of the +page in the current units with the following format #.#x#.#. +.TP +.B \-S cols:rows +Divide each image into cols across and rows down equal sections. +.TP +.B \-B +Force output to be written with Big\-Endian byte order. +This option only has an effect when the output file is created or +overwritten and not when it is appended to. +.TP +.B \-C +Suppress the use of ``strip chopping'' when reading images +that have a single strip/tile of uncompressed data. +.TP +.B \-c +Specify the compression to use for data written to the output file: +.B none +for no compression, +.B packbits +for PackBits compression, +.B lzw +for Lempel\-Ziv & Welch compression, +.B jpeg +for baseline JPEG compression. +.B zip +for Deflate compression, +.B g3 +for CCITT Group 3 (T.4) compression, +and +.B g4 +for CCITT Group 4 (T.6) compression. +By default +.I tiffcrop +will compress data according to the value of the +.I Compression +tag found in the source file. +.IP +The +.SM CCITT +Group 3 and Group 4 compression algorithms can only +be used with bilevel data. +.IP +Group 3 compression can be specified together with several +T.4\-specific options: +.B 1d +for 1\-dimensional encoding, +.B 2d +for 2\-dimensional encoding, +and +.B fill +to force each encoded scanline to be zero\-filled so that the +terminating EOL code lies on a byte boundary. +Group 3\-specific options are specified by appending a ``:''\-separated +list to the ``g3'' option; e.g. +.B "\-c g3:2d:fill" +to get 2D\-encoded data with byte\-aligned EOL codes. +.IP +.SM LZW +compression can be specified together with a +.I predictor +value. +A predictor value of 2 causes +each scanline of the output image to undergo horizontal +differencing before it is encoded; a value +of 1 forces each scanline to be encoded without differencing. +LZW\-specific options are specified by appending a ``:''\-separated +list to the ``lzw'' option; e.g. +.B "\-c lzw:2" +for +.SM LZW +compression with horizontal differencing. +.TP +.B \-f +Specify the bit fill order to use in writing output data. +By default, +.I tiffcrop +will create a new file with the same fill order as the original. +Specifying +.B "\-f lsb2msb" +will force data to be written with the FillOrder tag set to +.SM LSB2MSB, +while +.B "\-f msb2lsb" +will force data to be written with the FillOrder tag set to +.SM MSB2LSB. +.TP +.B \-i +Ignore non\-fatal read errors and continue processing of the input file. +.TP +.B \-l +Specify the length of a tile (in pixels). +.I Tiffcrop +attempts to set the tile dimensions so +that no more than 8 kilobytes of data appear in a tile. +.TP +.B \-L +Force output to be written with Little\-Endian byte order. +This option only has an effect when the output file is created or +overwritten and not when it is appended to. +.TP +.B \-M +Suppress the use of memory\-mapped files when reading images. +.TP +.B \-p +Specify the planar configuration to use in writing image data +that has more than one sample per pixel. +By default, +.I tiffcrop +will create a new file with the same planar configuration as +the original. +Specifying +.B "\-p contig" +will force data to be written with multi\-sample data packed +together, while +.B "\-p separate" +will force samples to be written in separate planes. +.TP +.B \-r +Specify the number of rows (scanlines) in each strip of data +written to the output file. +By default (or when value +.B 0 +is specified), +.I tiffcrop +attempts to set the rows/strip that no more than 8 kilobytes of +data appear in a strip. If you specify the special value +.B \-1 +it will results in infinite number of the rows per strip. The entire image +will be the one strip in that case. +.TP +.B \-s +Force the output file to be written with data organized in strips +(rather than tiles). +.TP +.B \-t +Force the output file to be written with data organized in tiles +(rather than strips). +.TP +.B \-w +Specify the width of a tile (in pixels). +.I tiffcrop +attempts to set the tile dimensions so +that no more than 8 kilobytes of data appear in a tile. +.I tiffcrop +attempts to set the tile dimensions so +that no more than 8 kilobytes of data appear in a tile. +.TP +Debug and dump facility +.B \-D opt1:value1,opt2:value2,opt3:value3:opt4:value4 +Display program progress and/or dump raw data to non\-TIFF files. +Options include the following and must be joined as a comma +separated list. The use of this option is generally limited to +program debugging and development of future options. An equal sign +may be substituted for the colon in option:value pairs. +.IP +debug:N Display limited program progress indicators where larger N +increase the level of detail. +.IP +format:txt|raw Format any logged data as ASCII text or raw binary +values. ASCII text dumps include strings of ones and zeroes representing +the binary values in the image data plus identifying headers. +.IP +level:N Specify the level of detail presented in the dump files. +This can vary from dumps of the entire input or output image data to dumps +of data processed by specific functions. Current range of levels is 1 to 3. +.IP +input:full\-path\-to\-directory/input\-dumpname +.IP +output:full\-path\-to\-directory/output\-dumpname +.IP +When dump files are being written, each image will be written to a separate +file with the name built by adding a numeric sequence value to the dumpname +and an extension of .txt for ASCII dumps or .bin for binary dumps. + +The four debug/dump options are independent, though it makes little sense to +specify a dump file without specifying a detail level. +.IP +Note: Tiffcrop may be compiled with -DDEVELMODE to enable additional very + low level debug reporting. +.SH "EXAMPLES" +The following concatenates two files and writes the result using +.SM LZW +encoding: +.RS +.nf +tiffcrop \-c lzw a.tif b.tif result.tif +.fi +.RE +.PP +To convert a G3 1d\-encoded +.SM TIFF +to a single strip of G4\-encoded data the following might be used: +.RS +.nf +tiffcrop \-c g4 \-r 10000 g3.tif g4.tif +.fi +.RE +(1000 is just a number that is larger than the number of rows in +the source file.) + +To extract a selected set of images from a multi\-image TIFF file +use the \-N option described above. Thus, to copy the 1st and 3rd +images of image file "album.tif" to "result.tif": +.RS +.nf +tiffcrop \-N 1,3 album.tif result.tif +.fi +.RE +.PP +Invert a bilevel image scan of a microfilmed document and crop off margins of +0.25 inches on the left and right, 0.5 inch on the top, and 0.75 inch on the +bottom. From the remaining portion of the image, select the second and third +quarters, ie, one half of the area left from the center to each margin. +.RS +tiffcrop \-U in \-m 0.5,0.25,0.75,0.25 \-E left \-Z 2:4,3:4 \-I both MicrofilmNegative.tif MicrofilmPostiveCenter.tif +.fi +.RE +.PP +Extract only the final image of a large Architectural E sized +multipage TIFF file and rotate it 90 degrees clockwise while +reformatting the output to fit on tabloid sized sheets with one +quarter of an inch on each side: +.RS +tiffcrop \-N last \-R 90 \-O auto \-P tabloid \-U in \-J 0.25 \-K 0.25 \-H 300 \-V 300 Big\-PlatMap.tif BigPlatMap\-Tabloid.tif +.fi +.RE +The output images will have a specified resolution of 300 dpi in both +directions. The orientation of each page will be determined by whichever +choice requires the fewest pages. To specify a specific orientation, use +the portrait or landscape option. The paper size option does not resample +the image. It breaks each original image into a series of smaller images +that will fit on the target paper size at the specified resolution. +.fi +.RE +.PP +Extract two regions 2048 pixels wide by 2048 pixels high from each page of +a multi\-page input file and write each region to a separate output file. +.RS +tiffcrop \-U px \-z 1,1,2048,2048:1,2049,2048,4097 \-e separate CheckScans.tiff Check +.fi +.RE +The output file names will use the stem Check with a numeric suffix which is +incremented for each region of each image, eg Check\-001.tiff, Check\-002.tiff ... +Check\-NNN.tiff. To produce a unique file for each page of the input image +with one new image for each region of the input image on that page, change +the export option to \-e multiple. + +.SH "NOTES" +.PP +In general, bilevel, grayscale, palette and RGB(A) data with bit depths +from 1 to 32 bits should work in both interleaved and separate plane +formats. Unlike tiffcp, tiffcrop can read and write tiled images with +bits per sample that are not a multiple of 8 in both interleaved and +separate planar format. Floating point data types are supported at +bit depts of 16, 24, 32 and 64 bits per sample. +.PP +Not all images can be converted from one compression scheme to another. +Data with some photometric interpretations and/or bit depths are tied to +specific compression schemes and vice-versa, e.g. Group 3/4 compression +is only usable for bilevel data. JPEG compression is only usable on 8 +bit per sample data (or 12 bit if +.I LibTIFF +was compiled with 12 bit JPEG support). Support for OJPEG compressed +images is problematic at best. Since OJPEG compression is no longer +supported for writing images with LibTIFF, these images will be updated +to the newer JPEG compression when they are copied or processed. This +may cause the image to appear color shifted or distorted after conversion. +In some cases, it is possible to remove the original compression from +image data using the option -cnone. +.PP +Tiffcrop does not currently provide options to up or downsample data to +different bit depths or convert data from one photometric interpretation +to another, e.g. 16 bits per sample to 8 bits per sample or RGB to grayscale. +.PP +Tiffcrop is very loosely derived from code in +.I tiffcp +with extensive modifications and additions to support the selection of input +images and regions and the exporting of them to one or more output files in +various groupings. The image manipulation routines are entirely new and +additional ones may be added in the future. It will handle tiled images with +bit depths that are not a multiple of eight that tiffcp may refuse to read. +.PP +.I Tiffcrop +was designed to handle large files containing many moderate sized images +with memory usage that is independent of the number of images in the file. +In order to support compression modes that are not based on individual +scanlines, e.g. JPEG, it now reads images by strip or tile rather than by +indvidual scanlines. In addition to the memory required by the input and +output buffers associated with +.I LibTIFF +one or more buffers at least as large as the largest image to be read are +required. The design favors large volume document processing uses over +scientific or graphical manipulation of large datasets as might be found +in research or remote sensing scenarios. +.SH "SEE ALSO" +.BR pal2rgb (1), +.BR tiffinfo (1), +.BR tiffcmp (1), +.BR tiffcp (1), +.BR tiffmedian (1), +.BR tiffsplit (1), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ + diff --git a/src/SDL2/external/tiff-4.0.3/man/tiffdither.1 b/src/SDL2/external/tiff-4.0.3/man/tiffdither.1 new file mode 100644 index 000000000..ab0d32a78 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiffdither.1 @@ -0,0 +1,132 @@ +.\" $Id: tiffdither.1,v 1.4 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 1990-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFDITHER 1 "September 20, 2005" "libtiff" +.SH NAME +tiffdither \- convert a greyscale image to bilevel using dithering +.SH SYNOPSIS +.B tiffdither +[ +.I options +] +.I input.tif +.I output.tif +.SH DESCRIPTION +.I tiffdither +converts a single channel 8-bit greyscale image to a bilevel image +using Floyd-Steinberg error propagation with thresholding. +.SH OPTIONS +.TP +.B \-c +Specify the compression to use for data written to the output file: +.B none +for no compression, +.B packbits +for PackBits compression, +.B lzw +for Lempel-Ziv & Welch compression, +.B zip +for Deflate compression, +.B g3 +for CCITT Group 3 (T.4) compression, +and +.B g4 +for CCITT Group 4 (T.6) compression. +By default +.I tiffdither +will compress data according to the value of the +.I Compression +tag found in the source file. +.IP +The +.SM CCITT +Group 3 and Group 4 compression algorithms can only +be used with bilevel data. +.IP +Group 3 compression can be specified together with several +T.4-specific options: +.B 1d +for 1-dimensional encoding, +.B 2d +for 2-dimensional encoding, +and +.B fill +to force each encoded scanline to be zero-filled so that the +terminating EOL code lies on a byte boundary. +Group 3-specific options are specified by appending a ``:''-separated +list to the ``g3'' option; e.g. +.B "\-c g3:2d:fill" +to get 2D-encoded data with byte-aligned EOL codes. +.IP +.SM LZW +compression can be specified together with a +.I predictor +value. +A predictor value of 2 causes +each scanline of the output image to undergo horizontal +differencing before it is encoded; a value +of 1 forces each scanline to be encoded without differencing. +LZW-specific options are specified by appending a ``:''-separated +list to the ``lzw'' option; e.g. +.B "\-c lzw:2" +for +.SM LZW +compression with horizontal differencing. +.TP +.B \-f +Specify the bit fill order to use in writing output data. +By default, +.I tiffdither +will create a new file with the same fill order as the original. +Specifying +.B "\-f lsb2msb" +will force data to be written with the +.I Fill\%Order +tag set to +.SM LSB2MSB , +while +.B "\-f msb2lsb" +will force data to be written with the +.I Fill\%Order +tag set to +.SM MSB2LSB . +.TP +.B \-t +Set the threshold value for dithering. +By default the threshold value is 128. +.SH NOTES +The dither algorithm is taken from the +.BR tiffmedian (1) +program (written by Paul Heckbert). +.SH "SEE ALSO" +.BR pal2rgb (1), +.BR fax2tiff (1), +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiff2bw (1), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiffdump.1 b/src/SDL2/external/tiff-4.0.3/man/tiffdump.1 new file mode 100644 index 000000000..076f9ffee --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiffdump.1 @@ -0,0 +1,81 @@ +.\" $Id: tiffdump.1,v 1.5 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFDUMP 1 "October 23, 2005" "libtiff" +.SH NAME +tiffdump \- print verbatim information about +.SM TIFF +files +.SH SYNOPSIS +.B tiffdump +[ +.I options +] +.I "name \&..." +.SH DESCRIPTION +.I tiffdump +displays directory information from files created according +to the Tag Image File Format, Revision 6.0. +The header of each +.SM TIFF +file (magic number, version, and first directory offset) +is displayed, followed by the tag contents of each directory in the file. +For each tag, the name, data type, count, and value(s) is displayed. +When the symbolic name for a tag or data type is known, the symbolic +name is displayed followed by it's numeric (decimal) value. +Tag values are displayed enclosed in ``<>'' characters immediately +preceded by the value of the count field. +For example, an +.I ImageWidth +tag might be displayed as ``ImageWidth (256) SHORT (3) 1<800>''. +.PP +.I tiffdump +is particularly useful for investigating the contents of +.SM TIFF +files that +.I libtiff +does not understand. +.SH OPTIONS +.TP +.B \-h +Force numeric data to be printed in hexadecimal rather than the +default decimal. +.TP +.BI \-m " items" +Change the number of indirect data items that are printed. By default, this +will be 24. +.TP +.BI \-o " offset" +Dump the contents of the +.SM IFD +at the a particular file offset. +The file offset may be specified using the usual C-style syntax; +i.e. a leading ``0x'' for hexadecimal and a leading ``0'' for octal. +.SH "SEE ALSO" +.BR tiffinfo (1), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiffgt.1 b/src/SDL2/external/tiff-4.0.3/man/tiffgt.1 new file mode 100644 index 000000000..680a49a04 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiffgt.1 @@ -0,0 +1,245 @@ +.\" $Id: tiffgt.1,v 1.4 2006-04-20 12:17:19 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFGT 1 "September 20, 2005" "libtiff" +.SH NAME +tiffgt \- display an image stored in a +.SM TIFF +file (Silicon Graphics version) +.SH SYNOPSIS +.B tiffgt +[ +.I options +] +.I "input.tif ..." +.SH DESCRIPTION +.I tiffgt +displays one or more images stored using the +Tag Image File Format, Revision 6.0. +Each image is placed in a fixed size window that the +user must position on the display (unless configured +otherwise through X defaults). +If the display has fewer than 24 bitplanes, or if the +image does not warrant full color, then +.SM RGB +color values are mapped to the closest values that exist in +the colormap (this is done using the +.I rgbi +routine found in the graphics utility library +.BR \-lgutil .) +.PP +.I tiffgt +correctly handles files with any of the following characteristics: +.sp .5 +.in +0.5i +.ta \w'\fIPhotometricInterpretation\fP 'u +.nf +\fIBitsPerSample\fP 1, 2, 4, 8, 16 +\fISamplesPerPixel\fP 1, 3, 4 (the 4th sample is ignored) +\fIPhotometricInterpretation\fP 0 (min-is-white), 1 (min-is-black), 2 (RGB), 3 (palette), 6 (YCbCr) +\fIPlanarConfiguration\fP 1 (contiguous), 2 (separate) +\fIOrientation\fP 1 (top-left), 4 (bottom-left) +.fi +.in -0.5i +.sp .5 +Data may be organized as strips or tiles and may be +compressed with any of the compression algorithms supported +by the +.IR libtiff (3) +library. +.PP +For palette images (\c +.IR PhotometricInterpretation =3), +.I tiffgt +inspects the colormap values and assumes either 16-bit +or 8-bit values according to the maximum value. +That is, if no colormap entry greater than 255 is found, +.I tiffgt +assumes the colormap has only 8-bit values; otherwise +it assumes 16-bit values. +This inspection is done to handle old images written by +previous (incorrect) versions of +.IR libtiff . +.PP +.I tiffgt +can be used to display multiple images one-at-a-time. +The left mouse button switches the display to the first image in the +.I next +file in the list of files specified on the command line. +The right mouse button switches to the first image in the +.I previous +file in the list. +The middle mouse button causes the first image in the first file +specified on the command line to be displayed. +In addition the following keyboard commands are recognized: +.TP +.B b +Use a +.I PhotometricInterpretation +of MinIsBlack in displaying the current image. +.TP +.B l +Use a +.I FillOrder +of lsb-to-msb in decoding the current image. +.TP +.B m +Use a +.I FillOrder +of msb-to-lsb in decoding the current image. +.TP +.B c +Use a colormap visual to display the current image. +.TP +.B r +Use a true color (24-bit RGB) visual to display the current image. +.TP +.B w +Use a +.I PhotometricInterpretation +of MinIsWhite in displaying the current image. +.TP +.B W +Toggle (enable/disable) display of warning messages from the +.SM TIFF +library when decoding images. +.TP +.B E +Toggle (enable/disable) display of error messages from the +.SM TIFF +library when decoding images. +.TP +.B z +Reset all parameters to their default settings (\c +.IR FillOrder , +.IR PhotometricInterpretation , +handling of warnings and errors). +.TP +.B PageUp +Display the previous image in the current file or the last +image in the previous file. +.TP +.B PageDown +Display the next image in the current file or the first image +in the next file. +.TP +.B Home +Display the first image in the current file. +.TP +.B End +Display the last image in the current file (unimplemented). +.SH OPTIONS +.TP +.B \-c +Force image display in a colormap window. +.TP +.B \-d +Specify an image to display by directory number. +By default the first image in the file is displayed. +Directories are numbered starting at zero. +.TP +.B \-e +Enable reporting of error messages from the +.SM TIFF +library. +By default +.I tiffgt +silently ignores images that cannot be read. +.TP +.B \-f +Force +.I tiffgt +to run as a foreground process. +By default +.I tiffgt +will place itself in the background once it has opened the +requested image file. +.TP +.B \-l +Force the presumed bit ordering to be +.SM LSB +to +.SM MSB. +.TP +.B \-m +Force the presumed bit ordering to be +.SM MSB +to +.SM LSB. +.TP +.B \-o +Specify an image to display by directory offset. +By default the first image in the file is displayed. +Directories offsets may be specified using C-style syntax; +i.e. a leading ``0x'' for hexadecimal and a leading ``0'' for octal. +.TP +.B \-p +Override the value of the +.I PhotometricInterpretation +tag; the parameter may be one of: +.BR miniswhite , +.BR minisblack , +.BR rgb , +.BR palette , +.BR mask , +.BR separated , +.BR ycbcr , +and +.BR cielab . +.TP +.B \-r +Force image display in a full color window. +.TP +.B \-s +Stop on the first read error. +By default all errors in the input data are ignored and +.I tiffgt +does it's best to display as much of an image as possible. +.TP +.B \-w +Enable reporting of warning messages from the +.SM TIFF +library. +By default +.I tiffgt +ignores warning messages generated when reading an image. +.TP +.B \-v +Place information in the title bar describing +what type of window (full color or colormap) is being +used, the name of the input file, and the directory +index of the image (if non-zero). +By default, the window type is not shown in the title bar. +.SH BUGS +Images wider and taller than the display are silently truncated to avoid +crashing old versions of the window manager. +.SH "SEE ALSO" +.BR tiffdump (1), +.BR tiffinfo (1), +.BR tiffcp (1), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiffinfo.1 b/src/SDL2/external/tiff-4.0.3/man/tiffinfo.1 new file mode 100644 index 000000000..2d5737520 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiffinfo.1 @@ -0,0 +1,88 @@ +.\" $Id: tiffinfo.1,v 1.2 2005-11-02 11:07:19 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFINFO 1 "November 2, 2005" "libtiff" +.SH NAME +tiffinfo \- print information about +.SM TIFF +files +.SH SYNOPSIS +.B tiffinfo +[ +.I options +] +.I "input.tif \&..." +.SH DESCRIPTION +.I Tiffinfo +displays information about files created according +to the Tag Image File Format, Revision 6.0. +By default, the contents of each +.SM TIFF +directory in each file +is displayed, with the value of each tag shown symbolically +(where sensible). +.SH OPTIONS +.TP +.B \-c +Display the colormap and color/gray response curves, if present. +.TP +.B \-D +In addition to displaying the directory tags, +read and decompress all the data in each image (but not display it). +.TP +.B \-d +In addition to displaying the directory tags, +print each byte of decompressed data in hexadecimal. +.TP +.B \-j +Display any \s-2JPEG\s0-related tags that are present. +.TP +.B \-o +Set the initial +.SM TIFF +directory according to the specified file offset. +The file offset may be specified using the usual C-style syntax; +i.e. a leading ``0x'' for hexadecimal and a leading ``0'' for octal. +.TP +.B \-s +Display the offsets and byte counts for each data strip in a directory. +.TP +.B \-z +Enable strip chopping when reading image data. +.TP +.B \-# +Set the initial +.SM TIFF +directory to +.IR # . +.SH "SEE ALSO" +.BR pal2rgb (1), +.BR tiffcp (1), +.BR tiffcmp (1), +.BR tiffmedian (1), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiffmedian.1 b/src/SDL2/external/tiff-4.0.3/man/tiffmedian.1 new file mode 100644 index 000000000..c584b97fe --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiffmedian.1 @@ -0,0 +1,112 @@ +.\" $Id: tiffmedian.1,v 1.3 2005-11-02 11:07:19 dron Exp $ +.\" +.\" Copyright (c) 1990-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFMEDIAN 1 "November 2, 2005" "libtiff" +.SH NAME +tiffmedian \- apply the median cut algorithm to data in a +.SM TIFF +file +.SH SYNOPSIS +.B tiffmedian +[ +.I options +] +.I input.tif +.I output.tif +.SH DESCRIPTION +.I tiffmedian +applies the median cut algorithm to an +.SM RGB +image in +.I input.tif +to generate a palette image that is written to +.IR output.tif . +The generated colormap has, by default, 256 entries. +The image data is quantized by mapping each +pixel to the closest color values in the colormap. +.SH OPTIONS +.TP +.B \-c +Specify the compression to use for data written to the output file: +.B none +for no compression, +.B packbits +for PackBits compression, +.B lzw +for Lempel-Ziv & Welch compression, +and +.B zip +for Deflate compression. +By default +.I tiffmedian +will compress data according to the value of the +.I Compression +tag found in the source file. +.IP +.SM LZW +compression can be specified together with a +.I predictor +value. +A predictor value of 2 causes +each scanline of the output image to undergo horizontal +differencing before it is encoded; a value +of 1 forces each scanline to be encoded without differencing. +LZW-specific options are specified by appending a ``:''-separated +list to the ``lzw'' option; e.g. +.B "\-c lzw:2" +for +.SM LZW +compression with horizontal differencing. +.TP +.B \-C +Specify the number of entries to use in the generated colormap. +By default all 256 entries/colors are used. +.TP +.B \-f +Apply Floyd-Steinberg dithering before selecting a colormap entry. +.TP +.B \-r +Specify the number of rows (scanlines) in each strip of data +written to the output file. +By default, +.I tiffmedian +attempts to set the rows/strip +that no more than 8 kilobytes of data appear in a strip. +.SH NOTES +This program is derived from Paul Heckbert's +.I median +program. +.SH "SEE ALSO" +.BR pal2rgb (1), +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiffcmp (1), +.BR libtiff (3TIFF) +.PP +.BR "Color Image Quantization for Frame Buffer Display", +Paul Heckbert, SIGGRAPH proceedings, 1982, pp. 297-307. +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiffset.1 b/src/SDL2/external/tiff-4.0.3/man/tiffset.1 new file mode 100644 index 000000000..ed0d12fb0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiffset.1 @@ -0,0 +1,96 @@ +.\" $Id: tiffset.1,v 1.5 2011-03-26 12:07:20 fwarmerdam Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFSET 1 "November 21, 2004" "libtiff" +.SH NAME +tiffset \- set a field in a +.SM TIFF +header +.SH SYNOPSIS +.B tiffset +[ +.I options +] +.I filename.tif +.SH DESCRIPTION +.I Tiffset +sets the value of a +.SM TIFF +header to a specified value. +.SH OPTIONS +.TP +.BI \-d " dirnumber" +change the current directory (starting at 0). +.TP +.BI \-s " tagnumber" "\fR [\fP" " count" "\fR ]\fP" " value ..." +Set the value of the named tag to the value or values specified. +.TP +.BI \-sd " diroffset" +change the current directory by offset. +.TP +.BI \-sf " tagnumber filename" +Set the value of the tag to the contents of filename. This option is +supported for ASCII tags only. +.SH EXAMPLES +The following example sets the image description tag (270) of a.tif to +the contents of the file descrip: +.RS +.nf +tiffset \-sf 270 descrip a.tif +.fi +.RE +.PP +The following example sets the artist tag (315) of a.tif to the string +``Anonymous'': +.RS +.nf +tiffset \-s 315 Anonymous a.tif +.fi +.RE +.PP +This example sets the resolution of the file a.tif to 300 dpi: +.RS +.nf +tiffset \-s 296 2 a.tif +tiffset \-s 282 300.0 a.tif +tiffset \-s 283 300.0 a.tif +.fi +.RE +.PP +Set the photometric interpretation of the third page of a.tif to +min-is-black (ie. inverts it): +.RS +.nf +tiffset -d 2 -s 262 1 a.tif +.fi +.RE +.SH "SEE ALSO" +.BR tiffdump (1), +.BR tiffinfo (1), +.BR tiffcp (1), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiffsplit.1 b/src/SDL2/external/tiff-4.0.3/man/tiffsplit.1 new file mode 100644 index 000000000..411ebf488 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiffsplit.1 @@ -0,0 +1,69 @@ +.\" $Id: tiffsplit.1,v 1.6 2009-08-24 19:13:40 bfriesen Exp $ +.\" +.\" Copyright (c) 1992-1997 Sam Leffler +.\" Copyright (c) 1992-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFSPLIT 1 "September 20, 2005" "libtiff" +.SH NAME +tiffsplit \- split a multi-image +.SM TIFF +into single-image +.SM TIFF +files +.SH SYNOPSIS +.B tiffsplit +.I src.tif +[ +.I prefix +] +.SH DESCRIPTION +.I tiffsplit +takes a multi-directory (page) +.SM TIFF +file and creates one or more single-directory (page) +.SM TIFF +files from it. +The output files are given names created by concatenating +a prefix, a lexically ordered +suffix in the range [\fIaaa\fP-\fIzzz\fP], the suffix +.I .tif +(e.g. +.IR xaaa.tif , +.IR xaab.tif , +.IR ... , +.IR xzzz.tif ). +If a prefix is not specified on the command line, +the default prefix of +.I x +is used. +.SH OPTIONS +None. +.SH BUGS +Only a select set of ``known tags'' is copied when splitting. +.SH "SEE ALSO" +.BR tiffcp (1), +.BR tiffinfo (1), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/man/tiffsv.1 b/src/SDL2/external/tiff-4.0.3/man/tiffsv.1 new file mode 100644 index 000000000..206df5676 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/man/tiffsv.1 @@ -0,0 +1,142 @@ +.\" $Id: tiffsv.1,v 1.3 2005-11-02 11:07:19 dron Exp $ +.\" +.\" Copyright (c) 1988-1997 Sam Leffler +.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and +.\" its documentation for any purpose is hereby granted without fee, provided +.\" that (i) the above copyright notices and this permission notice appear in +.\" all copies of the software and related documentation, and (ii) the names of +.\" Sam Leffler and Silicon Graphics may not be used in any advertising or +.\" publicity relating to the software without the specific, prior written +.\" permission of Sam Leffler and Silicon Graphics. +.\" +.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.\" +.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +.\" OF THIS SOFTWARE. +.\" +.if n .po 0 +.TH TIFFSV 1 "September 20, 2005" "libtiff" +.SH NAME +tiffsv \- save an image from the framebuffer in a +.SM TIFF +file (Silicon Graphics version) +.SH SYNOPSIS +.B tiffsv +[ +.I options +] +.I output.tif +[ +.I "x1 x2 y1 y2" +] +.SH DESCRIPTION +.I tiffsv +saves all or part of the framebuffer in a file using the +Tag Image File Format, Revision 6.0. +By default, the image is saved with data samples packed (\c +.IR PlanarConfiguration =1), +compressed with the Lempel-Ziv & Welch algorithm (\c +.IR Compression =5), +and with each strip no more than 8 kilobytes. +These characteristics can be overridden, or explicitly specified +with the options described below. +.SH OPTIONS +.TP +.B \-b +Save the image as a greyscale image +as if it were processed by +.IR tiff2bw (1). +This option is included for compatibility with the standard +.IR scrsave (6D) +program. +.TP +.B \-c +Specify the compression to use for data written to the output file: +.B none +for no compression, +.B packbits +for PackBits compression, +.B jpeg +for baseline JPEG compression, +.B zip +for Deflate compression, +and +.B lzw +for Lempel-Ziv & Welch compression (default). +.IP +.SM LZW +compression can be specified together with a +.I predictor +value. +A predictor value of 2 causes +each scanline of the output image to undergo horizontal +differencing before it is encoded; a value +of 1 forces each scanline to be encoded without differencing. +LZW-specific options are specified by appending a ``:''-separated +list to the ``lzw'' option; e.g. +.B "\-c lzw:2" +for +.SM LZW +compression with horizontal differencing. +.TP +.B \-p +Specify the planar configuration to use in writing image data. +By default, +.I tiffsv +will create a new file with the data samples packed contiguously. +Specifying +.B "\-p contig" +will force data to be written with multi-sample data packed +together, while +.B "\-p separate" +will force samples to be written in separate planes. +.TP +.B \-r +Specify the number of rows (scanlines) in each strip of data +written to the output file. +By default, +.I tiffsv +attempts to set the rows/strip +that no more than 8 kilobytes of data appear in a strip. +.SH NOTE +Except for the use of +.SM TIFF, +this program is equivalent to the standard +.I scrsave +program. +This means, for example, that you can use it in conjunction with +the standard +.IR icut +program simply by creating a link called +.IR scrsave , +or by creating a shell script called +.I scrsave +that invokes +.I tiffgt +with the appropriate options. +.SH BUGS +If data are saved compressed and in separate planes, then the +rows in each strip is silently set to one to avoid limitations +in the +.BR libtiff (3TIFF) +library. +.SH "SEE ALSO" +.BR scrsave (6D) +.BR pal2rgb (1), +.BR tiffdump (1), +.BR tiffgt (1), +.BR tiffinfo (1), +.BR tiffcp (1), +.BR tiffmedian (1), +.BR libtiff (3TIFF) +.PP +Libtiff library home page: +.BR http://www.remotesensing.org/libtiff/ diff --git a/src/SDL2/external/tiff-4.0.3/nmake.opt b/src/SDL2/external/tiff-4.0.3/nmake.opt new file mode 100644 index 000000000..7e882d2d4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/nmake.opt @@ -0,0 +1,218 @@ +# $Id: nmake.opt,v 1.18 2006/06/07 16:33:45 dron Exp $ +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Compile time parameters for MS Visual C++ compiler. +# You may edit this file to specify building options. + +# +###### Edit the following lines to choose a feature set you need. ####### +# + +# +# Select WINMODE_CONSOLE to build a library which reports errors to stderr, or +# WINMODE_WINDOWED to build such that errors are reported via MessageBox(). +# +WINMODE_CONSOLE = 1 +#WINMODE_WINDOWED = 1 + +# +# Comment out the following lines to disable internal codecs. +# +# Support for CCITT Group 3 & 4 algorithms +CCITT_SUPPORT = 1 +# Support for Macintosh PackBits algorithm +PACKBITS_SUPPORT = 1 +# Support for LZW algorithm +LZW_SUPPORT = 1 +# Support for ThunderScan 4-bit RLE algorithm +THUNDER_SUPPORT = 1 +# Support for NeXT 2-bit RLE algorithm +NEXT_SUPPORT = 1 +# Support for LogLuv high dynamic range encoding +LOGLUV_SUPPORT = 1 + +# +# Uncomment and edit following lines to enable JPEG support. +# +#JPEG_SUPPORT = 1 +#JPEGDIR = d:/projects/jpeg-6b +#JPEG_INCLUDE = -I$(JPEGDIR) +#JPEG_LIB = $(JPEGDIR)/Release/jpeg.lib + +# +# Uncomment and edit following lines to enable ZIP support +# (required for Deflate compression and Pixar log-format) +# +#ZIP_SUPPORT = 1 +#ZLIBDIR = d:/projects/zlib-1.2.1 +#ZLIB_INCLUDE = -I$(ZLIBDIR) +#ZLIB_LIB = $(ZLIBDIR)/zlib.lib + +# +# Uncomment and edit following lines to enable ISO JBIG support +# +#JBIG_SUPPORT = 1 +#JBIGDIR = d:/projects/jbigkit +#JBIG_INCLUDE = -I$(JBIGDIR)/libjbig +#JBIG_LIB = $(JBIGDIR)/libjbig/jbig.lib + +# +# Uncomment following line to enable Pixar log-format algorithm +# (Zlib required). +# +#PIXARLOG_SUPPORT = 1 + +# +# Comment out the following lines to disable strip chopping +# (whether or not to convert single-strip uncompressed images to mutiple +# strips of specified size to reduce memory usage). Default strip size +# is 8192 bytes, it can be configured via the STRIP_SIZE_DEFAULT parameter +# +STRIPCHOP_SUPPORT = 1 +STRIP_SIZE_DEFAULT = 8192 + +# +# Comment out the following lines to disable treating the fourth sample with +# no EXTRASAMPLE_ value as being ASSOCALPHA. Many packages produce RGBA +# files but don't mark the alpha properly. +# +EXTRASAMPLE_AS_ALPHA_SUPPORT = 1 + +# +# Comment out the following lines to disable picking up YCbCr subsampling +# info from the JPEG data stream to support files lacking the tag. +# See Bug 168 in Bugzilla, and JPEGFixupTestSubsampling() for details. +# +CHECK_JPEG_YCBCR_SUBSAMPLING = 1 + +# +####################### Compiler related options. ####################### +# + +# +# Pick debug or optimized build flags. We default to an optimized build +# with no debugging information. +# NOTE: /EHsc option required if you want to build the C++ stream API +# +OPTFLAGS = /Ox /MD /EHsc /W3 /D_CRT_SECURE_NO_DEPRECATE +#OPTFLAGS = /Zi + +# +# Uncomment following line to enable using Windows Common RunTime Library +# instead of Windows specific system calls. See notes on top of tif_unix.c +# module for details. +# +USE_WIN_CRT_LIB = 1 + +# Compiler specific options. You may probably want to adjust compilation +# parameters in CFLAGS variable. Refer to your compiler documentation +# for the option reference. +# +MAKE = nmake /nologo +CC = cl /nologo +CXX = cl /nologo +AR = lib /nologo +LD = link /nologo + +CFLAGS = $(OPTFLAGS) $(INCL) $(EXTRAFLAGS) +CXXFLAGS = $(OPTFLAGS) $(INCL) $(EXTRAFLAGS) +EXTRAFLAGS = +LIBS = + +# Name of the output shared library +DLLNAME = libtiff.dll + +# +########### There is nothing to edit below this line normally. ########### +# + +# Set the native cpu bit order +EXTRAFLAGS = -DFILLODER_LSB2MSB $(EXTRAFLAGS) + +!IFDEF WINMODE_WINDOWED +EXTRAFLAGS = -DTIF_PLATFORM_WINDOWED $(EXTRAFLAGS) +LIBS = user32.lib $(LIBS) +!ELSE +EXTRAFLAGS = -DTIF_PLATFORM_CONSOLE $(EXTRAFLAGS) +!ENDIF + +# Codec stuff +!IFDEF CCITT_SUPPORT +EXTRAFLAGS = -DCCITT_SUPPORT $(EXTRAFLAGS) +!ENDIF + +!IFDEF PACKBITS_SUPPORT +EXTRAFLAGS = -DPACKBITS_SUPPORT $(EXTRAFLAGS) +!ENDIF + +!IFDEF LZW_SUPPORT +EXTRAFLAGS = -DLZW_SUPPORT $(EXTRAFLAGS) +!ENDIF + +!IFDEF THUNDER_SUPPORT +EXTRAFLAGS = -DTHUNDER_SUPPORT $(EXTRAFLAGS) +!ENDIF + +!IFDEF NEXT_SUPPORT +EXTRAFLAGS = -DNEXT_SUPPORT $(EXTRAFLAGS) +!ENDIF + +!IFDEF LOGLUV_SUPPORT +EXTRAFLAGS = -DLOGLUV_SUPPORT $(EXTRAFLAGS) +!ENDIF + +!IFDEF JPEG_SUPPORT +LIBS = $(LIBS) $(JPEG_LIB) +EXTRAFLAGS = -DJPEG_SUPPORT -DOJPEG_SUPPORT $(EXTRAFLAGS) +!ENDIF + +!IFDEF ZIP_SUPPORT +LIBS = $(LIBS) $(ZLIB_LIB) +EXTRAFLAGS = -DZIP_SUPPORT $(EXTRAFLAGS) +!IFDEF PIXARLOG_SUPPORT +EXTRAFLAGS = -DPIXARLOG_SUPPORT $(EXTRAFLAGS) +!ENDIF +!ENDIF + +!IFDEF JBIG_SUPPORT +LIBS = $(LIBS) $(JBIG_LIB) +EXTRAFLAGS = -DJBIG_SUPPORT $(EXTRAFLAGS) +!ENDIF + +!IFDEF STRIPCHOP_SUPPORT +EXTRAFLAGS = -DSTRIPCHOP_DEFAULT=TIFF_STRIPCHOP -DSTRIP_SIZE_DEFAULT=$(STRIP_SIZE_DEFAULT) $(EXTRAFLAGS) +!ENDIF + +!IFDEF EXTRASAMPLE_AS_ALPHA_SUPPORT +EXTRAFLAGS = -DDEFAULT_EXTRASAMPLE_AS_ALPHA $(EXTRAFLAGS) +!ENDIF + +!IFDEF CHECK_JPEG_YCBCR_SUBSAMPLING +EXTRAFLAGS = -DCHECK_JPEG_YCBCR_SUBSAMPLING $(EXTRAFLAGS) +!ENDIF + +!IFDEF USE_WIN_CRT_LIB +EXTRAFLAGS = -DAVOID_WIN32_FILEIO $(EXTRAFLAGS) +!ELSE +EXTRAFLAGS = -DUSE_WIN32_FILEIO $(EXTRAFLAGS) +!ENDIF diff --git a/src/SDL2/external/tiff-4.0.3/port/Makefile.am b/src/SDL2/external/tiff-4.0.3/port/Makefile.am new file mode 100644 index 000000000..94504fd80 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/port/Makefile.am @@ -0,0 +1,31 @@ +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +EXTRA_DIST = Makefile.vc libport.h + +noinst_LTLIBRARIES = libport.la +libport_la_SOURCES = dummy.c libport.h +libport_la_LIBADD = @LTLIBOBJS@ + diff --git a/src/SDL2/external/tiff-4.0.3/port/Makefile.in b/src/SDL2/external/tiff-4.0.3/port/Makefile.in new file mode 100644 index 000000000..f268a9c4e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/port/Makefile.in @@ -0,0 +1,605 @@ +# Makefile.in generated by automake 1.12.4 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = port +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp \ + $(top_srcdir)/config/mkinstalldirs getopt.c lfind.c \ + strcasecmp.c strtoul.c strtoull.c +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/libtiff/tif_config.h \ + $(top_builddir)/libtiff/tiffconf.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +LTLIBRARIES = $(noinst_LTLIBRARIES) +libport_la_DEPENDENCIES = @LTLIBOBJS@ +am_libport_la_OBJECTS = dummy.lo +libport_la_OBJECTS = $(am_libport_la_OBJECTS) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/libtiff +depcomp = $(SHELL) $(top_srcdir)/config/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(libport_la_SOURCES) +DIST_SOURCES = $(libport_la_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GLUT_CFLAGS = @GLUT_CFLAGS@ +GLUT_LIBS = @GLUT_LIBS@ +GLU_CFLAGS = @GLU_CFLAGS@ +GLU_LIBS = @GLU_LIBS@ +GL_CFLAGS = @GL_CFLAGS@ +GL_LIBS = @GL_LIBS@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBDIR = @LIBDIR@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTIFF_ALPHA_VERSION = @LIBTIFF_ALPHA_VERSION@ +LIBTIFF_DOCDIR = @LIBTIFF_DOCDIR@ +LIBTIFF_MAJOR_VERSION = @LIBTIFF_MAJOR_VERSION@ +LIBTIFF_MICRO_VERSION = @LIBTIFF_MICRO_VERSION@ +LIBTIFF_MINOR_VERSION = @LIBTIFF_MINOR_VERSION@ +LIBTIFF_RELEASE_DATE = @LIBTIFF_RELEASE_DATE@ +LIBTIFF_VERSION = @LIBTIFF_VERSION@ +LIBTIFF_VERSION_INFO = @LIBTIFF_VERSION_INFO@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +tiff_libs_private = @tiff_libs_private@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +EXTRA_DIST = Makefile.vc libport.h +noinst_LTLIBRARIES = libport.la +libport_la_SOURCES = dummy.c libport.h +libport_la_LIBADD = @LTLIBOBJS@ +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign port/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign port/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +clean-noinstLTLIBRARIES: + -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) + @list='$(noinst_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } +libport.la: $(libport_la_OBJECTS) $(libport_la_DEPENDENCIES) $(EXTRA_libport_la_DEPENDENCIES) + $(AM_V_CCLD)$(LINK) $(libport_la_OBJECTS) $(libport_la_LIBADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/getopt.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/lfind.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strcasecmp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strtoul.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strtoull.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dummy.Plo@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(LTLIBRARIES) +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ + mostlyclean-am + +distclean: distclean-am + -rm -rf $(DEPDIR) ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf $(DEPDIR) ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-noinstLTLIBRARIES cscopelist ctags \ + distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/SDL2/external/tiff-4.0.3/port/Makefile.vc b/src/SDL2/external/tiff-4.0.3/port/Makefile.vc new file mode 100644 index 000000000..f5c85c6ba --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/port/Makefile.vc @@ -0,0 +1,43 @@ +# $Id: Makefile.vc,v 1.4 2006/03/23 14:54:02 dron Exp $ +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. +# +# Makefile for MS Visual C and Watcom C compilers. +# +# To build: +# C:\libtiff\port> nmake /f makefile.vc + +!INCLUDE ..\nmake.opt + +OBJ = \ + strcasecmp.obj \ + getopt.obj + +all: libport.lib + +libport.lib: $(OBJ) + $(AR) /out:libport.lib $(OBJ) + +clean: + -del *.obj + -del *.lib + diff --git a/src/SDL2/external/tiff-4.0.3/port/dummy.c b/src/SDL2/external/tiff-4.0.3/port/dummy.c new file mode 100644 index 000000000..46f93bccc --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/port/dummy.c @@ -0,0 +1,12 @@ +/* $Id: dummy.c,v 1.3 2007/03/21 14:54:16 dron Exp $ */ + +/* + * Dummy function, just to be ensure that the library always will be created. + */ + +void +libport_dummy_function() +{ + return; +} + diff --git a/src/SDL2/external/tiff-4.0.3/port/getopt.c b/src/SDL2/external/tiff-4.0.3/port/getopt.c new file mode 100644 index 000000000..6eff8ee52 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/port/getopt.c @@ -0,0 +1,125 @@ +/* $Id: getopt.c,v 1.3 2009-01-22 20:53:07 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1987, 1993, 1994 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#if 0 +static char sccsid[] = "@(#)getopt.c 8.3 (Berkeley) 4/27/95"; +__RCSID("$NetBSD: getopt.c,v 1.26 2003/08/07 16:43:40 agc Exp $"); +#endif + +#include +#include +#include "libport.h" + +int opterr = 1, /* if error message should be printed */ + optind = 1, /* index into parent argv vector */ + optopt, /* character checked for validity */ + optreset; /* reset getopt */ +char *optarg; /* argument associated with option */ + +#define BADCH (int)'?' +#define BADARG (int)':' +#define EMSG "" + +/* + * getopt -- + * Parse argc/argv argument vector. + */ +int +getopt(int argc, char * const argv[], const char *optstring) +{ + static char *place = EMSG; /* option letter processing */ + char *oli; /* option letter list index */ + + if (optreset || *place == 0) { /* update scanning pointer */ + optreset = 0; + place = argv[optind]; + if (optind >= argc || *place++ != '-') { + /* Argument is absent or is not an option */ + place = EMSG; + return (-1); + } + optopt = *place++; + if (optopt == '-' && *place == 0) { + /* "--" => end of options */ + ++optind; + place = EMSG; + return (-1); + } + if (optopt == 0) { + /* Solitary '-', treat as a '-' option + if the program (eg su) is looking for it. */ + place = EMSG; + if (strchr(optstring, '-') == NULL) + return -1; + optopt = '-'; + } + } else + optopt = *place++; + + /* See if option letter is one the caller wanted... */ + if (optopt == ':' || (oli = strchr(optstring, optopt)) == NULL) { + if (*place == 0) + ++optind; + if (opterr && *optstring != ':') + (void)fprintf(stderr, + "unknown option -- %c\n", optopt); + return (BADCH); + } + + /* Does this option need an argument? */ + if (oli[1] != ':') { + /* don't need argument */ + optarg = NULL; + if (*place == 0) + ++optind; + } else { + /* Option-argument is either the rest of this argument or the + entire next argument. */ + if (*place) + optarg = place; + else if (argc > ++optind) + optarg = argv[optind]; + else { + /* option-argument absent */ + place = EMSG; + if (*optstring == ':') + return (BADARG); + if (opterr) + (void)fprintf(stderr, + "option requires an argument -- %c\n", + optopt); + return (BADCH); + } + place = EMSG; + ++optind; + } + return (optopt); /* return option letter */ +} diff --git a/src/SDL2/external/tiff-4.0.3/port/lfind.c b/src/SDL2/external/tiff-4.0.3/port/lfind.c new file mode 100644 index 000000000..64b261ca3 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/port/lfind.c @@ -0,0 +1,62 @@ +/* $Id: lfind.c,v 1.4 2007/01/15 18:40:39 mloskot Exp $ */ + +/* + * Copyright (c) 1989, 1993 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from software contributed to Berkeley by + * Roger L. Snyder. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#if 0 +static char sccsid[] = "@(#)lsearch.c 8.1 (Berkeley) 6/4/93"; +__RCSID("$NetBSD: lsearch.c,v 1.2 2005/07/06 15:47:15 drochner Exp $"); +#endif + +#ifdef _WIN32_WCE +# include +#else +# include +#endif + +#ifndef NULL +# define NULL 0 +#endif + +void * +lfind(const void *key, const void *base, size_t *nmemb, size_t size, + int(*compar)(const void *, const void *)) +{ + char *element, *end; + + end = (char *)base + *nmemb * size; + for (element = (char *)base; element < end; element += size) + if (!compar(element, key)) /* key found */ + return element; + + return NULL; +} diff --git a/src/SDL2/external/tiff-4.0.3/port/libport.h b/src/SDL2/external/tiff-4.0.3/port/libport.h new file mode 100644 index 000000000..802f478bd --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/port/libport.h @@ -0,0 +1,51 @@ +/* $Id: libport.h,v 1.2 2009-11-02 14:44:13 bfriesen Exp $ */ + +/* + * Copyright (c) 2009 Frank Warmerdam + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _LIBPORT_ +#define _LIBPORT_ + +int getopt(int argc, char * const argv[], const char *optstring); +extern char *optarg; +extern int opterr; +extern int optind; +extern int optopt; + +int strcasecmp(const char *s1, const char *s2); + +#ifndef HAVE_GETOPT +# define HAVE_GETOPT 1 +#endif + +#if 0 +unsigned long strtoul(const char *nptr, char **endptr, int base); +#endif + +#if 0 +void * +lfind(const void *key, const void *base, size_t *nmemb, size_t size, + int(*compar)(const void *, const void *)); +#endif + +#endif /* ndef _LIBPORT_ */ diff --git a/src/SDL2/external/tiff-4.0.3/port/strcasecmp.c b/src/SDL2/external/tiff-4.0.3/port/strcasecmp.c new file mode 100644 index 000000000..1ff4312b9 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/port/strcasecmp.c @@ -0,0 +1,51 @@ +/* $Id: strcasecmp.c,v 1.3 2009-01-22 20:53:07 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1987, 1993 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#if 0 +static char sccsid[] = "@(#)strcasecmp.c 8.1 (Berkeley) 6/4/93"; +__RCSID("$NetBSD: strcasecmp.c,v 1.16 2003/08/07 16:43:49 agc Exp $"); +#endif + +#include +#include +#include "libport.h" + +int +strcasecmp(const char *s1, const char *s2) +{ + const unsigned char *us1 = (const unsigned char *)s1, + *us2 = (const unsigned char *)s2; + + while (tolower(*us1) == tolower(*us2++)) + if (*us1++ == '\0') + return (0); + return (tolower(*us1) - tolower(*--us2)); +} diff --git a/src/SDL2/external/tiff-4.0.3/port/strtoul.c b/src/SDL2/external/tiff-4.0.3/port/strtoul.c new file mode 100644 index 000000000..f7a9a1a56 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/port/strtoul.c @@ -0,0 +1,109 @@ +/* $Id: strtoul.c,v 1.2 2005/07/07 16:34:06 dron Exp $ */ + +/* + * Copyright (c) 1990, 1993 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#if 0 +static char sccsid[] = "@(#)strtoul.c 8.1 (Berkeley) 6/4/93"; +__RCSID("$NetBSD: strtoul.c,v 1.16 2003/08/07 16:43:45 agc Exp $"); +#endif + +#include +#include +#include +#include + +/* + * Convert a string to an unsigned long integer. + * + * Ignores `locale' stuff. Assumes that the upper and lower case + * alphabets and digits are each contiguous. + */ +unsigned long +strtoul(const char *nptr, char **endptr, int base) +{ + const char *s; + unsigned long acc, cutoff; + int c; + int neg, any, cutlim; + + /* + * See strtol for comments as to the logic used. + */ + s = nptr; + do { + c = (unsigned char) *s++; + } while (isspace(c)); + if (c == '-') { + neg = 1; + c = *s++; + } else { + neg = 0; + if (c == '+') + c = *s++; + } + if ((base == 0 || base == 16) && + c == '0' && (*s == 'x' || *s == 'X')) { + c = s[1]; + s += 2; + base = 16; + } + if (base == 0) + base = c == '0' ? 8 : 10; + + cutoff = ULONG_MAX / (unsigned long)base; + cutlim = (int)(ULONG_MAX % (unsigned long)base); + for (acc = 0, any = 0;; c = (unsigned char) *s++) { + if (isdigit(c)) + c -= '0'; + else if (isalpha(c)) + c -= isupper(c) ? 'A' - 10 : 'a' - 10; + else + break; + if (c >= base) + break; + if (any < 0) + continue; + if (acc > cutoff || (acc == cutoff && c > cutlim)) { + any = -1; + acc = ULONG_MAX; + errno = ERANGE; + } else { + any = 1; + acc *= (unsigned long)base; + acc += c; + } + } + if (neg && any > 0) + acc = -acc; + if (endptr != 0) + /* LINTED interface specification */ + *endptr = (char *)(any ? s - 1 : nptr); + return (acc); +} diff --git a/src/SDL2/external/tiff-4.0.3/port/strtoull.c b/src/SDL2/external/tiff-4.0.3/port/strtoull.c new file mode 100644 index 000000000..fb7739cc5 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/port/strtoull.c @@ -0,0 +1,116 @@ +/*- + * Copyright (c) 1992, 1993 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include +#include +#include +#include + +/* + * Convert a string to an unsigned long long integer. + * + * Assumes that the upper and lower case + * alphabets and digits are each contiguous. + */ +unsigned long long +strtoull(const char *nptr, char **endptr, int base) +{ + const char *s; + unsigned long long acc; + char c; + unsigned long long cutoff; + int neg, any, cutlim; + + /* + * See strtoq for comments as to the logic used. + */ + s = nptr; + do { + c = *s++; + } while (isspace((unsigned char)c)); + if (c == '-') { + neg = 1; + c = *s++; + } else { + neg = 0; + if (c == '+') + c = *s++; + } + if ((base == 0 || base == 16) && + c == '0' && (*s == 'x' || *s == 'X') && + ((s[1] >= '0' && s[1] <= '9') || + (s[1] >= 'A' && s[1] <= 'F') || + (s[1] >= 'a' && s[1] <= 'f'))) { + c = s[1]; + s += 2; + base = 16; + } + if (base == 0) + base = c == '0' ? 8 : 10; + acc = any = 0; + if (base < 2 || base > 36) + goto noconv; + + cutoff = ULLONG_MAX / base; + cutlim = ULLONG_MAX % base; + for ( ; ; c = *s++) { + if (c >= '0' && c <= '9') + c -= '0'; + else if (c >= 'A' && c <= 'Z') + c -= 'A' - 10; + else if (c >= 'a' && c <= 'z') + c -= 'a' - 10; + else + break; + if (c >= base) + break; + if (any < 0 || acc > cutoff || (acc == cutoff && c > cutlim)) + any = -1; + else { + any = 1; + acc *= base; + acc += c; + } + } + if (any < 0) { + acc = ULLONG_MAX; + errno = ERANGE; + } else if (!any) { +noconv: + errno = EINVAL; + } else if (neg) + acc = -acc; + if (endptr != NULL) + *endptr = (char *)(any ? s - 1 : nptr); + return (acc); +} diff --git a/src/SDL2/external/tiff-4.0.3/test/Makefile.am b/src/SDL2/external/tiff-4.0.3/test/Makefile.am new file mode 100644 index 000000000..4e115c95e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/Makefile.am @@ -0,0 +1,292 @@ +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +AUTOMAKE_OPTIONS = 1.12 color-tests parallel-tests foreign + +LIBTIFF = $(top_builddir)/libtiff/libtiff.la + +# Environment parameters to be used during tests +TESTS_ENVIRONMENT = \ + MAKE="$(MAKE)" \ + MAKEFLAGS="$(MAKEFLAGS)" \ + MEMCHECK="$(MEMCHECK)" + +EXTRA_DIST = \ + $(TESTSCRIPTS) \ + $(IMAGES_EXTRA_DIST) \ + common.sh + +# All of the tests to execute via 'make check' +TESTS = $(check_PROGRAMS) $(TESTSCRIPTS) + +# Tests which are expected to fail +XFAIL_TESTS = + +# Extra files which should be cleaned by 'make clean' +CLEANFILES = test_packbits.tif o-* + +# Executable programs which need to be built in order to support tests +check_PROGRAMS = ascii_tag long_tag short_tag strip_rw rewrite raw_decode custom_dir + +# Test scripts to execute +TESTSCRIPTS = \ + bmp2tiff_palette.sh \ + bmp2tiff_rgb.sh \ + gif2tiff.sh \ + ppm2tiff_pbm.sh \ + ppm2tiff_pgm.sh \ + ppm2tiff_ppm.sh \ + tiffcp-g3.sh \ + tiffcp-g3-1d.sh \ + tiffcp-g3-1d-fill.sh \ + tiffcp-g3-2d.sh \ + tiffcp-g3-2d-fill.sh \ + tiffcp-g4.sh \ + tiffcp-logluv.sh \ + tiffcp-thumbnail.sh \ + tiffdump.sh \ + tiffinfo.sh \ + tiffcp-split.sh \ + tiffcp-split-join.sh \ + tiff2ps-PS1.sh \ + tiff2ps-PS2.sh \ + tiff2ps-PS3.sh \ + tiff2ps-EPS1.sh \ + tiff2pdf.sh \ + tiffcrop-doubleflip-logluv-3c-16b.sh \ + tiffcrop-doubleflip-minisblack-1c-16b.sh \ + tiffcrop-doubleflip-minisblack-1c-8b.sh \ + tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh \ + tiffcrop-doubleflip-miniswhite-1c-1b.sh \ + tiffcrop-doubleflip-palette-1c-1b.sh \ + tiffcrop-doubleflip-palette-1c-4b.sh \ + tiffcrop-doubleflip-palette-1c-8b.sh \ + tiffcrop-doubleflip-rgb-3c-16b.sh \ + tiffcrop-doubleflip-rgb-3c-8b.sh \ + tiffcrop-extract-logluv-3c-16b.sh \ + tiffcrop-extract-minisblack-1c-16b.sh \ + tiffcrop-extract-minisblack-1c-8b.sh \ + tiffcrop-extract-minisblack-2c-8b-alpha.sh \ + tiffcrop-extract-miniswhite-1c-1b.sh \ + tiffcrop-extract-palette-1c-1b.sh \ + tiffcrop-extract-palette-1c-4b.sh \ + tiffcrop-extract-palette-1c-8b.sh \ + tiffcrop-extract-rgb-3c-16b.sh \ + tiffcrop-extract-rgb-3c-8b.sh \ + tiffcrop-extractz14-logluv-3c-16b.sh \ + tiffcrop-extractz14-minisblack-1c-16b.sh \ + tiffcrop-extractz14-minisblack-1c-8b.sh \ + tiffcrop-extractz14-minisblack-2c-8b-alpha.sh \ + tiffcrop-extractz14-miniswhite-1c-1b.sh \ + tiffcrop-extractz14-palette-1c-1b.sh \ + tiffcrop-extractz14-palette-1c-4b.sh \ + tiffcrop-extractz14-palette-1c-8b.sh \ + tiffcrop-extractz14-rgb-3c-16b.sh \ + tiffcrop-extractz14-rgb-3c-8b.sh \ + tiffcrop-R90-logluv-3c-16b.sh \ + tiffcrop-R90-minisblack-1c-16b.sh \ + tiffcrop-R90-minisblack-1c-8b.sh \ + tiffcrop-R90-minisblack-2c-8b-alpha.sh \ + tiffcrop-R90-miniswhite-1c-1b.sh \ + tiffcrop-R90-palette-1c-1b.sh \ + tiffcrop-R90-palette-1c-4b.sh \ + tiffcrop-R90-palette-1c-8b.sh \ + tiffcrop-R90-rgb-3c-16b.sh \ + tiffcrop-R90-rgb-3c-8b.sh \ + tiff2rgba-logluv-3c-16b.sh \ + tiff2rgba-minisblack-1c-16b.sh \ + tiff2rgba-minisblack-1c-8b.sh \ + tiff2rgba-minisblack-2c-8b-alpha.sh \ + tiff2rgba-miniswhite-1c-1b.sh \ + tiff2rgba-palette-1c-1b.sh \ + tiff2rgba-palette-1c-4b.sh \ + tiff2rgba-palette-1c-8b.sh \ + tiff2rgba-rgb-3c-16b.sh \ + tiff2rgba-rgb-3c-8b.sh \ + tiff2rgba-quad-tile.jpg.sh + +# This list should contain all of the TIFF files in the 'images' +# subdirectory which are intended to be used as input images for +# tests. All of these files should use the extension ".tiff". +TIFFIMAGES = \ + images/logluv-3c-16b.tiff \ + images/minisblack-1c-16b.tiff \ + images/minisblack-1c-8b.tiff \ + images/minisblack-2c-8b-alpha.tiff \ + images/miniswhite-1c-1b.tiff \ + images/palette-1c-1b.tiff \ + images/palette-1c-4b.tiff \ + images/palette-1c-8b.tiff \ + images/rgb-3c-16b.tiff \ + images/rgb-3c-8b.tiff \ + images/quad-tile.jpg.tiff + +BMPIMAGES = \ + images/palette-1c-8b.bmp \ + images/rgb-3c-8b.bmp + +GIFIMAGES = \ + images/palette-1c-8b.gif + +PNMIMAGES = \ + images/minisblack-1c-8b.pgm \ + images/miniswhite-1c-1b.pbm \ + images/rgb-3c-8b.ppm + +# This list should include all of the files in the 'images' +# subdirectory which are intended to be distributed. This may include +# files which are not currently used by the tests. +IMAGES_EXTRA_DIST = \ + images/README.txt \ + $(BMPIMAGES) \ + $(GIFIMAGES) \ + $(PNMIMAGES) \ + $(TIFFIMAGES) + +noinst_HEADERS = tifftest.h + +ascii_tag_SOURCES = ascii_tag.c +ascii_tag_LDADD = $(LIBTIFF) +long_tag_SOURCES = long_tag.c check_tag.c +long_tag_LDADD = $(LIBTIFF) +short_tag_SOURCES = short_tag.c check_tag.c +short_tag_LDADD = $(LIBTIFF) +strip_rw_SOURCES = strip_rw.c strip.c test_arrays.c test_arrays.h +strip_rw_LDADD = $(LIBTIFF) +rewrite_SOURCES = rewrite_tag.c +rewrite_LDADD = $(LIBTIFF) +raw_decode_SOURCES = raw_decode.c +raw_decode_LDADD = $(LIBTIFF) +custom_dir_SOURCES = custom_dir.c +custom_dir_LDADD = $(LIBTIFF) + +AM_CPPFLAGS = -I$(top_srcdir)/libtiff + +# memcheck: valgrind's memory access checker +memcheck: + $(MAKE) MEMCHECK='valgrind --tool=memcheck --leak-check=full --read-var-info=yes --track-origins=yes --num-callers=12 --quiet $(VALGRIND_EXTRA_OPTS)' check + +# ptrcheck: valgrind's experimental pointer checking tool. +ptrcheck: + $(MAKE) MEMCHECK='valgrind --tool=exp-ptrcheck --quiet $(VALGRIND_EXTRA_OPTS)' check + +generate-tiff2rgba-tests: + for file in $(TIFFIMAGES) ; \ + do \ + base=`basename $$file .tiff` ; \ + testscript=$(srcdir)/tiff2rgba-$$base.sh ; \ + ( \ + echo "#!/bin/sh" ; \ + echo "# Generated file, master is Makefile.am" ; \ + echo ". \$${srcdir:-.}/common.sh" ; \ + echo "infile=\"\$$srcdir/$$file\"" ; \ + echo "outfile=\"o-tiff2rgba-$$base.tiff\"" ; \ + echo "f_test_convert \"\$$TIFF2RGBA\" \$$infile \$$outfile" ; \ + echo "f_tiffinfo_validate \$$outfile" ; \ + ) > $$testscript ; \ + chmod +x $$testscript ; \ + done + +# Test rotations +generate-tiffcrop-R90-tests: + for file in $(TIFFIMAGES) ; \ + do \ + base=`basename $$file .tiff` ; \ + testscript=$(srcdir)/tiffcrop-R90-$$base.sh ; \ + ( \ + echo "#!/bin/sh" ; \ + echo "# Generated file, master is Makefile.am" ; \ + echo ". \$${srcdir:-.}/common.sh" ; \ + echo "infile=\"\$$srcdir/$$file\"" ; \ + echo "outfile=\"o-tiffcrop-R90-$$base.tiff\"" ; \ + echo "f_test_convert \"\$$TIFFCROP -R90\" \$$infile \$$outfile" ; \ + echo "f_tiffinfo_validate \$$outfile" ; \ + ) > $$testscript ; \ + chmod +x $$testscript ; \ + done + +# Test flip (mirror) +generate-tiffcrop-doubleflip-tests: + for file in $(TIFFIMAGES) ; \ + do \ + base=`basename $$file .tiff` ; \ + testscript=$(srcdir)/tiffcrop-doubleflip-$$base.sh ; \ + ( \ + echo "#!/bin/sh" ; \ + echo "# Generated file, master is Makefile.am" ; \ + echo ". \$${srcdir:-.}/common.sh" ; \ + echo "infile=\"\$$srcdir/$$file\"" ; \ + echo "outfile=\"o-tiffcrop-doubleflip-$$base.tiff\"" ; \ + echo "f_test_convert \"\$$TIFFCROP -F both\" \$$infile \$$outfile" ; \ + echo "f_tiffinfo_validate \$$outfile" ; \ + ) > $$testscript ; \ + chmod +x $$testscript ; \ + done + +# Test extracting a section 100 pixels wide and 100 pixels high +generate-tiffcrop-extract-tests: + for file in $(TIFFIMAGES) ; \ + do \ + base=`basename $$file .tiff` ; \ + testscript=$(srcdir)/tiffcrop-extract-$$base.sh ; \ + ( \ + echo "#!/bin/sh" ; \ + echo "# Generated file, master is Makefile.am" ; \ + echo ". \$${srcdir:-.}/common.sh" ; \ + echo "infile=\"\$$srcdir/$$file\"" ; \ + echo "outfile=\"o-tiffcrop-extract-$$base.tiff\"" ; \ + echo "f_test_convert \"\$$TIFFCROP -U px -E top -X 60 -Y 60\" \$$infile \$$outfile" ; \ + echo "f_tiffinfo_validate \$$outfile" ; \ + ) > $$testscript ; \ + chmod +x $$testscript ; \ + done + +# Test extracting the first and fourth quarters from the left side. +generate-tiffcrop-extractz14-tests: + for file in $(TIFFIMAGES) ; \ + do \ + base=`basename $$file .tiff` ; \ + testscript=$(srcdir)/tiffcrop-extractz14-$$base.sh ; \ + ( \ + echo "#!/bin/sh" ; \ + echo "# Generated file, master is Makefile.am" ; \ + echo ". \$${srcdir:-.}/common.sh" ; \ + echo "infile=\"\$$srcdir/$$file\"" ; \ + echo "outfile=\"o-tiffcrop-extractz14-$$base.tiff\"" ; \ + echo "f_test_convert \"\$$TIFFCROP -E left -Z1:4,2:4\" \$$infile \$$outfile" ; \ + echo "f_tiffinfo_validate \$$outfile" ; \ + ) > $$testscript ; \ + chmod +x $$testscript ; \ + done + +generate-tiffcrop-tests: \ + generate-tiffcrop-R90-tests \ + generate-tiffcrop-doubleflip-tests \ + generate-tiffcrop-extract-tests \ + generate-tiffcrop-extractz14-tests + +generate-tests: \ + generate-tiff2rgba-tests \ + generate-tiffcrop-tests diff --git a/src/SDL2/external/tiff-4.0.3/test/Makefile.in b/src/SDL2/external/tiff-4.0.3/test/Makefile.in new file mode 100644 index 000000000..0e40087cb --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/Makefile.in @@ -0,0 +1,1843 @@ +# Makefile.in generated by automake 1.12.4 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +XFAIL_TESTS = +check_PROGRAMS = ascii_tag$(EXEEXT) long_tag$(EXEEXT) \ + short_tag$(EXEEXT) strip_rw$(EXEEXT) rewrite$(EXEEXT) \ + raw_decode$(EXEEXT) custom_dir$(EXEEXT) +subdir = test +DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(top_srcdir)/config/depcomp \ + $(top_srcdir)/config/mkinstalldirs \ + $(top_srcdir)/config/test-driver +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/libtiff/tif_config.h \ + $(top_builddir)/libtiff/tiffconf.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am_ascii_tag_OBJECTS = ascii_tag.$(OBJEXT) +ascii_tag_OBJECTS = $(am_ascii_tag_OBJECTS) +ascii_tag_DEPENDENCIES = $(LIBTIFF) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +am_custom_dir_OBJECTS = custom_dir.$(OBJEXT) +custom_dir_OBJECTS = $(am_custom_dir_OBJECTS) +custom_dir_DEPENDENCIES = $(LIBTIFF) +am_long_tag_OBJECTS = long_tag.$(OBJEXT) check_tag.$(OBJEXT) +long_tag_OBJECTS = $(am_long_tag_OBJECTS) +long_tag_DEPENDENCIES = $(LIBTIFF) +am_raw_decode_OBJECTS = raw_decode.$(OBJEXT) +raw_decode_OBJECTS = $(am_raw_decode_OBJECTS) +raw_decode_DEPENDENCIES = $(LIBTIFF) +am_rewrite_OBJECTS = rewrite_tag.$(OBJEXT) +rewrite_OBJECTS = $(am_rewrite_OBJECTS) +rewrite_DEPENDENCIES = $(LIBTIFF) +am_short_tag_OBJECTS = short_tag.$(OBJEXT) check_tag.$(OBJEXT) +short_tag_OBJECTS = $(am_short_tag_OBJECTS) +short_tag_DEPENDENCIES = $(LIBTIFF) +am_strip_rw_OBJECTS = strip_rw.$(OBJEXT) strip.$(OBJEXT) \ + test_arrays.$(OBJEXT) +strip_rw_OBJECTS = $(am_strip_rw_OBJECTS) +strip_rw_DEPENDENCIES = $(LIBTIFF) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/libtiff +depcomp = $(SHELL) $(top_srcdir)/config/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(ascii_tag_SOURCES) $(custom_dir_SOURCES) \ + $(long_tag_SOURCES) $(raw_decode_SOURCES) $(rewrite_SOURCES) \ + $(short_tag_SOURCES) $(strip_rw_SOURCES) +DIST_SOURCES = $(ascii_tag_SOURCES) $(custom_dir_SOURCES) \ + $(long_tag_SOURCES) $(raw_decode_SOURCES) $(rewrite_SOURCES) \ + $(short_tag_SOURCES) $(strip_rw_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +HEADERS = $(noinst_HEADERS) +ETAGS = etags +CTAGS = ctags +am__tty_colors_dummy = \ + mgn= red= grn= lgn= blu= brg= std=; \ + am__color_tests=no +am__tty_colors = { \ + $(am__tty_colors_dummy); \ + if test "X$(AM_COLOR_TESTS)" = Xno; then \ + am__color_tests=no; \ + elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ + am__color_tests=yes; \ + elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ + am__color_tests=yes; \ + fi; \ + if test $$am__color_tests = yes; then \ + red=''; \ + grn=''; \ + lgn=''; \ + blu=''; \ + mgn=''; \ + brg=''; \ + std=''; \ + fi; \ +} +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__recheck_rx = ^[ ]*:recheck:[ ]* +am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* +am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* +# A command that, given a newline-separated list of test names on the +# standard input, print the name of the tests that are to be re-run +# upon "make recheck". +am__list_recheck_tests = $(AWK) '{ \ + recheck = 1; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + { \ + if ((getline line2 < ($$0 ".log")) < 0) \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ + { \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ + { \ + break; \ + } \ + }; \ + if (recheck) \ + print $$0; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# A command that, given a newline-separated list of test names on the +# standard input, create the global log from their .trs and .log files. +am__create_global_log = $(AWK) ' \ +function fatal(msg) \ +{ \ + print "fatal: making $@: " msg | "cat >&2"; \ + exit 1; \ +} \ +function rst_section(header) \ +{ \ + print header; \ + len = length(header); \ + for (i = 1; i <= len; i = i + 1) \ + printf "="; \ + printf "\n\n"; \ +} \ +{ \ + copy_in_global_log = 1; \ + global_test_result = "RUN"; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".trs"); \ + if (line ~ /$(am__global_test_result_rx)/) \ + { \ + sub("$(am__global_test_result_rx)", "", line); \ + sub("[ ]*$$", "", line); \ + global_test_result = line; \ + } \ + else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ + copy_in_global_log = 0; \ + }; \ + if (copy_in_global_log) \ + { \ + rst_section(global_test_result ": " $$0); \ + while ((rc = (getline line < ($$0 ".log"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".log"); \ + print line; \ + }; \ + printf "\n"; \ + }; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# Restructured Text title. +am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } +# Solaris 10 'make', and several other traditional 'make' implementations, +# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it +# by disabling -e (using the XSI extension "set +e") if it's set. +am__sh_e_setup = case $$- in *e*) set +e;; esac +# Default flags passed to test drivers. +am__common_driver_flags = \ + --color-tests "$$am__color_tests" \ + --enable-hard-errors "$$am__enable_hard_errors" \ + --expect-failure "$$am__expect_failure" +# To be inserted before the command running the test. Creates the +# directory for the log if needed. Stores in $dir the directory +# containing $f, in $tst the test, in $log the log. Executes the +# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# passes TESTS_ENVIRONMENT. Set up options for the wrapper that +# will run the test scripts (or their associated LOG_COMPILER, if +# thy have one). +am__check_pre = \ +$(am__sh_e_setup); \ +$(am__vpath_adj_setup) $(am__vpath_adj) \ +$(am__tty_colors); \ +srcdir=$(srcdir); export srcdir; \ +case "$@" in \ + */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ + *) am__odir=.;; \ +esac; \ +test "x$$am__odir" = x"." || test -d "$$am__odir" \ + || $(MKDIR_P) "$$am__odir" || exit $$?; \ +if test -f "./$$f"; then dir=./; \ +elif test -f "$$f"; then dir=; \ +else dir="$(srcdir)/"; fi; \ +tst=$$dir$$f; log='$@'; \ +if test -n '$(DISABLE_HARD_ERRORS)'; then \ + am__enable_hard_errors=no; \ +else \ + am__enable_hard_errors=yes; \ +fi; \ +case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ + am__expect_failure=yes;; \ + *) \ + am__expect_failure=no;; \ +esac; \ +$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) +# A shell command to get the names of the tests scripts with any registered +# extension removed (i.e., equivalently, the names of the test logs, with +# the '.log' extension removed). The result is saved in the shell variable +# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, +# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", +# since that might cause problem with VPATH rewrites for suffix-less tests. +# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. +am__set_TESTS_bases = \ + bases='$(TEST_LOGS)'; \ + bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ + bases=`echo $$bases` +RECHECK_LOGS = $(TEST_LOGS) +AM_RECURSIVE_TARGETS = check recheck +TEST_SUITE_LOG = test-suite.log +TEST_EXTENSIONS = @EXEEXT@ .test +LOG_DRIVER = $(SHELL) $(top_srcdir)/config/test-driver +LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) +am__set_b = \ + case '$@' in \ + */*) \ + case '$*' in \ + */*) b='$*';; \ + *) b=`echo '$@' | sed 's/\.log$$//'`; \ + esac;; \ + *) \ + b='$*';; \ + esac +am__test_logs1 = $(TESTS:=.log) +am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) +TEST_LOGS = $(am__test_logs2:.test.log=.log) +TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/config/test-driver +TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ + $(TEST_LOG_FLAGS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GLUT_CFLAGS = @GLUT_CFLAGS@ +GLUT_LIBS = @GLUT_LIBS@ +GLU_CFLAGS = @GLU_CFLAGS@ +GLU_LIBS = @GLU_LIBS@ +GL_CFLAGS = @GL_CFLAGS@ +GL_LIBS = @GL_LIBS@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBDIR = @LIBDIR@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTIFF_ALPHA_VERSION = @LIBTIFF_ALPHA_VERSION@ +LIBTIFF_DOCDIR = @LIBTIFF_DOCDIR@ +LIBTIFF_MAJOR_VERSION = @LIBTIFF_MAJOR_VERSION@ +LIBTIFF_MICRO_VERSION = @LIBTIFF_MICRO_VERSION@ +LIBTIFF_MINOR_VERSION = @LIBTIFF_MINOR_VERSION@ +LIBTIFF_RELEASE_DATE = @LIBTIFF_RELEASE_DATE@ +LIBTIFF_VERSION = @LIBTIFF_VERSION@ +LIBTIFF_VERSION_INFO = @LIBTIFF_VERSION_INFO@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +tiff_libs_private = @tiff_libs_private@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +AUTOMAKE_OPTIONS = 1.12 color-tests parallel-tests foreign +LIBTIFF = $(top_builddir)/libtiff/libtiff.la + +# Environment parameters to be used during tests +TESTS_ENVIRONMENT = \ + MAKE="$(MAKE)" \ + MAKEFLAGS="$(MAKEFLAGS)" \ + MEMCHECK="$(MEMCHECK)" + +EXTRA_DIST = \ + $(TESTSCRIPTS) \ + $(IMAGES_EXTRA_DIST) \ + common.sh + + +# All of the tests to execute via 'make check' +TESTS = $(check_PROGRAMS) $(TESTSCRIPTS) + +# Extra files which should be cleaned by 'make clean' +CLEANFILES = test_packbits.tif o-* + +# Test scripts to execute +TESTSCRIPTS = \ + bmp2tiff_palette.sh \ + bmp2tiff_rgb.sh \ + gif2tiff.sh \ + ppm2tiff_pbm.sh \ + ppm2tiff_pgm.sh \ + ppm2tiff_ppm.sh \ + tiffcp-g3.sh \ + tiffcp-g3-1d.sh \ + tiffcp-g3-1d-fill.sh \ + tiffcp-g3-2d.sh \ + tiffcp-g3-2d-fill.sh \ + tiffcp-g4.sh \ + tiffcp-logluv.sh \ + tiffcp-thumbnail.sh \ + tiffdump.sh \ + tiffinfo.sh \ + tiffcp-split.sh \ + tiffcp-split-join.sh \ + tiff2ps-PS1.sh \ + tiff2ps-PS2.sh \ + tiff2ps-PS3.sh \ + tiff2ps-EPS1.sh \ + tiff2pdf.sh \ + tiffcrop-doubleflip-logluv-3c-16b.sh \ + tiffcrop-doubleflip-minisblack-1c-16b.sh \ + tiffcrop-doubleflip-minisblack-1c-8b.sh \ + tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh \ + tiffcrop-doubleflip-miniswhite-1c-1b.sh \ + tiffcrop-doubleflip-palette-1c-1b.sh \ + tiffcrop-doubleflip-palette-1c-4b.sh \ + tiffcrop-doubleflip-palette-1c-8b.sh \ + tiffcrop-doubleflip-rgb-3c-16b.sh \ + tiffcrop-doubleflip-rgb-3c-8b.sh \ + tiffcrop-extract-logluv-3c-16b.sh \ + tiffcrop-extract-minisblack-1c-16b.sh \ + tiffcrop-extract-minisblack-1c-8b.sh \ + tiffcrop-extract-minisblack-2c-8b-alpha.sh \ + tiffcrop-extract-miniswhite-1c-1b.sh \ + tiffcrop-extract-palette-1c-1b.sh \ + tiffcrop-extract-palette-1c-4b.sh \ + tiffcrop-extract-palette-1c-8b.sh \ + tiffcrop-extract-rgb-3c-16b.sh \ + tiffcrop-extract-rgb-3c-8b.sh \ + tiffcrop-extractz14-logluv-3c-16b.sh \ + tiffcrop-extractz14-minisblack-1c-16b.sh \ + tiffcrop-extractz14-minisblack-1c-8b.sh \ + tiffcrop-extractz14-minisblack-2c-8b-alpha.sh \ + tiffcrop-extractz14-miniswhite-1c-1b.sh \ + tiffcrop-extractz14-palette-1c-1b.sh \ + tiffcrop-extractz14-palette-1c-4b.sh \ + tiffcrop-extractz14-palette-1c-8b.sh \ + tiffcrop-extractz14-rgb-3c-16b.sh \ + tiffcrop-extractz14-rgb-3c-8b.sh \ + tiffcrop-R90-logluv-3c-16b.sh \ + tiffcrop-R90-minisblack-1c-16b.sh \ + tiffcrop-R90-minisblack-1c-8b.sh \ + tiffcrop-R90-minisblack-2c-8b-alpha.sh \ + tiffcrop-R90-miniswhite-1c-1b.sh \ + tiffcrop-R90-palette-1c-1b.sh \ + tiffcrop-R90-palette-1c-4b.sh \ + tiffcrop-R90-palette-1c-8b.sh \ + tiffcrop-R90-rgb-3c-16b.sh \ + tiffcrop-R90-rgb-3c-8b.sh \ + tiff2rgba-logluv-3c-16b.sh \ + tiff2rgba-minisblack-1c-16b.sh \ + tiff2rgba-minisblack-1c-8b.sh \ + tiff2rgba-minisblack-2c-8b-alpha.sh \ + tiff2rgba-miniswhite-1c-1b.sh \ + tiff2rgba-palette-1c-1b.sh \ + tiff2rgba-palette-1c-4b.sh \ + tiff2rgba-palette-1c-8b.sh \ + tiff2rgba-rgb-3c-16b.sh \ + tiff2rgba-rgb-3c-8b.sh \ + tiff2rgba-quad-tile.jpg.sh + + +# This list should contain all of the TIFF files in the 'images' +# subdirectory which are intended to be used as input images for +# tests. All of these files should use the extension ".tiff". +TIFFIMAGES = \ + images/logluv-3c-16b.tiff \ + images/minisblack-1c-16b.tiff \ + images/minisblack-1c-8b.tiff \ + images/minisblack-2c-8b-alpha.tiff \ + images/miniswhite-1c-1b.tiff \ + images/palette-1c-1b.tiff \ + images/palette-1c-4b.tiff \ + images/palette-1c-8b.tiff \ + images/rgb-3c-16b.tiff \ + images/rgb-3c-8b.tiff \ + images/quad-tile.jpg.tiff + +BMPIMAGES = \ + images/palette-1c-8b.bmp \ + images/rgb-3c-8b.bmp + +GIFIMAGES = \ + images/palette-1c-8b.gif + +PNMIMAGES = \ + images/minisblack-1c-8b.pgm \ + images/miniswhite-1c-1b.pbm \ + images/rgb-3c-8b.ppm + + +# This list should include all of the files in the 'images' +# subdirectory which are intended to be distributed. This may include +# files which are not currently used by the tests. +IMAGES_EXTRA_DIST = \ + images/README.txt \ + $(BMPIMAGES) \ + $(GIFIMAGES) \ + $(PNMIMAGES) \ + $(TIFFIMAGES) + +noinst_HEADERS = tifftest.h +ascii_tag_SOURCES = ascii_tag.c +ascii_tag_LDADD = $(LIBTIFF) +long_tag_SOURCES = long_tag.c check_tag.c +long_tag_LDADD = $(LIBTIFF) +short_tag_SOURCES = short_tag.c check_tag.c +short_tag_LDADD = $(LIBTIFF) +strip_rw_SOURCES = strip_rw.c strip.c test_arrays.c test_arrays.h +strip_rw_LDADD = $(LIBTIFF) +rewrite_SOURCES = rewrite_tag.c +rewrite_LDADD = $(LIBTIFF) +raw_decode_SOURCES = raw_decode.c +raw_decode_LDADD = $(LIBTIFF) +custom_dir_SOURCES = custom_dir.c +custom_dir_LDADD = $(LIBTIFF) +AM_CPPFLAGS = -I$(top_srcdir)/libtiff +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign test/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +clean-checkPROGRAMS: + @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +ascii_tag$(EXEEXT): $(ascii_tag_OBJECTS) $(ascii_tag_DEPENDENCIES) $(EXTRA_ascii_tag_DEPENDENCIES) + @rm -f ascii_tag$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(ascii_tag_OBJECTS) $(ascii_tag_LDADD) $(LIBS) +custom_dir$(EXEEXT): $(custom_dir_OBJECTS) $(custom_dir_DEPENDENCIES) $(EXTRA_custom_dir_DEPENDENCIES) + @rm -f custom_dir$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(custom_dir_OBJECTS) $(custom_dir_LDADD) $(LIBS) +long_tag$(EXEEXT): $(long_tag_OBJECTS) $(long_tag_DEPENDENCIES) $(EXTRA_long_tag_DEPENDENCIES) + @rm -f long_tag$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(long_tag_OBJECTS) $(long_tag_LDADD) $(LIBS) +raw_decode$(EXEEXT): $(raw_decode_OBJECTS) $(raw_decode_DEPENDENCIES) $(EXTRA_raw_decode_DEPENDENCIES) + @rm -f raw_decode$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(raw_decode_OBJECTS) $(raw_decode_LDADD) $(LIBS) +rewrite$(EXEEXT): $(rewrite_OBJECTS) $(rewrite_DEPENDENCIES) $(EXTRA_rewrite_DEPENDENCIES) + @rm -f rewrite$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(rewrite_OBJECTS) $(rewrite_LDADD) $(LIBS) +short_tag$(EXEEXT): $(short_tag_OBJECTS) $(short_tag_DEPENDENCIES) $(EXTRA_short_tag_DEPENDENCIES) + @rm -f short_tag$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(short_tag_OBJECTS) $(short_tag_LDADD) $(LIBS) +strip_rw$(EXEEXT): $(strip_rw_OBJECTS) $(strip_rw_DEPENDENCIES) $(EXTRA_strip_rw_DEPENDENCIES) + @rm -f strip_rw$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(strip_rw_OBJECTS) $(strip_rw_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ascii_tag.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/check_tag.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/custom_dir.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/long_tag.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/raw_decode.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rewrite_tag.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/short_tag.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strip.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strip_rw.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_arrays.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +# Recover from deleted '.trs' file; this should ensure that +# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create +# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells +# to avoid problems with "make -n". +.log.trs: + rm -f $< $@ + $(MAKE) $(AM_MAKEFLAGS) $< + +# Leading 'am--fnord' is there to ensure the list of targets does not +# exand to empty, as could happen e.g. with make check TESTS=''. +am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) +am--force-recheck: + @: + +$(TEST_SUITE_LOG): $(TEST_LOGS) + @$(am__set_TESTS_bases); \ + am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ + redo_bases=`for i in $$bases; do \ + am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ + done`; \ + if test -n "$$redo_bases"; then \ + redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ + redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ + if $(am__make_dryrun); then :; else \ + rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ + fi; \ + fi; \ + if test -n "$$am__remaking_logs"; then \ + echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ + "recursion detected" >&2; \ + else \ + am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ + fi; \ + if $(am__make_dryrun); then :; else \ + st=0; \ + errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ + for i in $$redo_bases; do \ + test -f $$i.trs && test -r $$i.trs \ + || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ + test -f $$i.log && test -r $$i.log \ + || { echo "$$errmsg $$i.log" >&2; st=1; }; \ + done; \ + test $$st -eq 0 || exit 1; \ + fi + @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ + ws='[ ]'; \ + results=`for b in $$bases; do echo $$b.trs; done`; \ + test -n "$$results" || results=/dev/null; \ + all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ + pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ + fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ + skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ + xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ + xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ + error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ + if test `expr $$fail + $$xpass + $$error` -eq 0; then \ + success=true; \ + else \ + success=false; \ + fi; \ + br='==================='; br=$$br$$br$$br$$br; \ + result_count () \ + { \ + if test x"$$1" = x"--maybe-color"; then \ + maybe_colorize=yes; \ + elif test x"$$1" = x"--no-color"; then \ + maybe_colorize=no; \ + else \ + echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + fi; \ + shift; \ + desc=$$1 count=$$2; \ + if test $$maybe_colorize = yes && test $$count -gt 0; then \ + color_start=$$3 color_end=$$std; \ + else \ + color_start= color_end=; \ + fi; \ + echo "$${color_start}# $$desc $$count$${color_end}"; \ + }; \ + create_testsuite_report () \ + { \ + result_count $$1 "TOTAL:" $$all "$$brg"; \ + result_count $$1 "PASS: " $$pass "$$grn"; \ + result_count $$1 "SKIP: " $$skip "$$blu"; \ + result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ + result_count $$1 "FAIL: " $$fail "$$red"; \ + result_count $$1 "XPASS:" $$xpass "$$red"; \ + result_count $$1 "ERROR:" $$error "$$mgn"; \ + }; \ + { \ + echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ + $(am__rst_title); \ + create_testsuite_report --no-color; \ + echo; \ + echo ".. contents:: :depth: 2"; \ + echo; \ + for b in $$bases; do echo $$b; done \ + | $(am__create_global_log); \ + } >$(TEST_SUITE_LOG).tmp || exit 1; \ + mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ + if $$success; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ + fi; \ + echo "$${col}$$br$${std}"; \ + echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ + echo "$${col}$$br$${std}"; \ + create_testsuite_report --maybe-color; \ + echo "$$col$$br$$std"; \ + if $$success; then :; else \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + if test -n "$(PACKAGE_BUGREPORT)"; then \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + fi; \ + echo "$$col$$br$$std"; \ + fi; \ + $$success || exit 1 + +check-TESTS: + @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list + @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + trs_list=`for i in $$bases; do echo $$i.trs; done`; \ + log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ + exit $$?; +recheck: all $(check_PROGRAMS) + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + bases=`for i in $$bases; do echo $$i; done \ + | $(am__list_recheck_tests)` || exit 1; \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + log_list=`echo $$log_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ + am__force_recheck=am--force-recheck \ + TEST_LOGS="$$log_list"; \ + exit $$? +ascii_tag.log: ascii_tag$(EXEEXT) + @p='ascii_tag$(EXEEXT)'; \ + b='ascii_tag'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +long_tag.log: long_tag$(EXEEXT) + @p='long_tag$(EXEEXT)'; \ + b='long_tag'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +short_tag.log: short_tag$(EXEEXT) + @p='short_tag$(EXEEXT)'; \ + b='short_tag'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +strip_rw.log: strip_rw$(EXEEXT) + @p='strip_rw$(EXEEXT)'; \ + b='strip_rw'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +rewrite.log: rewrite$(EXEEXT) + @p='rewrite$(EXEEXT)'; \ + b='rewrite'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +raw_decode.log: raw_decode$(EXEEXT) + @p='raw_decode$(EXEEXT)'; \ + b='raw_decode'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +custom_dir.log: custom_dir$(EXEEXT) + @p='custom_dir$(EXEEXT)'; \ + b='custom_dir'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +bmp2tiff_palette.sh.log: bmp2tiff_palette.sh + @p='bmp2tiff_palette.sh'; \ + b='bmp2tiff_palette.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +bmp2tiff_rgb.sh.log: bmp2tiff_rgb.sh + @p='bmp2tiff_rgb.sh'; \ + b='bmp2tiff_rgb.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +gif2tiff.sh.log: gif2tiff.sh + @p='gif2tiff.sh'; \ + b='gif2tiff.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +ppm2tiff_pbm.sh.log: ppm2tiff_pbm.sh + @p='ppm2tiff_pbm.sh'; \ + b='ppm2tiff_pbm.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +ppm2tiff_pgm.sh.log: ppm2tiff_pgm.sh + @p='ppm2tiff_pgm.sh'; \ + b='ppm2tiff_pgm.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +ppm2tiff_ppm.sh.log: ppm2tiff_ppm.sh + @p='ppm2tiff_ppm.sh'; \ + b='ppm2tiff_ppm.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcp-g3.sh.log: tiffcp-g3.sh + @p='tiffcp-g3.sh'; \ + b='tiffcp-g3.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcp-g3-1d.sh.log: tiffcp-g3-1d.sh + @p='tiffcp-g3-1d.sh'; \ + b='tiffcp-g3-1d.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcp-g3-1d-fill.sh.log: tiffcp-g3-1d-fill.sh + @p='tiffcp-g3-1d-fill.sh'; \ + b='tiffcp-g3-1d-fill.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcp-g3-2d.sh.log: tiffcp-g3-2d.sh + @p='tiffcp-g3-2d.sh'; \ + b='tiffcp-g3-2d.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcp-g3-2d-fill.sh.log: tiffcp-g3-2d-fill.sh + @p='tiffcp-g3-2d-fill.sh'; \ + b='tiffcp-g3-2d-fill.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcp-g4.sh.log: tiffcp-g4.sh + @p='tiffcp-g4.sh'; \ + b='tiffcp-g4.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcp-logluv.sh.log: tiffcp-logluv.sh + @p='tiffcp-logluv.sh'; \ + b='tiffcp-logluv.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcp-thumbnail.sh.log: tiffcp-thumbnail.sh + @p='tiffcp-thumbnail.sh'; \ + b='tiffcp-thumbnail.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffdump.sh.log: tiffdump.sh + @p='tiffdump.sh'; \ + b='tiffdump.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffinfo.sh.log: tiffinfo.sh + @p='tiffinfo.sh'; \ + b='tiffinfo.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcp-split.sh.log: tiffcp-split.sh + @p='tiffcp-split.sh'; \ + b='tiffcp-split.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcp-split-join.sh.log: tiffcp-split-join.sh + @p='tiffcp-split-join.sh'; \ + b='tiffcp-split-join.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2ps-PS1.sh.log: tiff2ps-PS1.sh + @p='tiff2ps-PS1.sh'; \ + b='tiff2ps-PS1.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2ps-PS2.sh.log: tiff2ps-PS2.sh + @p='tiff2ps-PS2.sh'; \ + b='tiff2ps-PS2.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2ps-PS3.sh.log: tiff2ps-PS3.sh + @p='tiff2ps-PS3.sh'; \ + b='tiff2ps-PS3.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2ps-EPS1.sh.log: tiff2ps-EPS1.sh + @p='tiff2ps-EPS1.sh'; \ + b='tiff2ps-EPS1.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2pdf.sh.log: tiff2pdf.sh + @p='tiff2pdf.sh'; \ + b='tiff2pdf.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-doubleflip-logluv-3c-16b.sh.log: tiffcrop-doubleflip-logluv-3c-16b.sh + @p='tiffcrop-doubleflip-logluv-3c-16b.sh'; \ + b='tiffcrop-doubleflip-logluv-3c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-doubleflip-minisblack-1c-16b.sh.log: tiffcrop-doubleflip-minisblack-1c-16b.sh + @p='tiffcrop-doubleflip-minisblack-1c-16b.sh'; \ + b='tiffcrop-doubleflip-minisblack-1c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-doubleflip-minisblack-1c-8b.sh.log: tiffcrop-doubleflip-minisblack-1c-8b.sh + @p='tiffcrop-doubleflip-minisblack-1c-8b.sh'; \ + b='tiffcrop-doubleflip-minisblack-1c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh.log: tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh + @p='tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh'; \ + b='tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-doubleflip-miniswhite-1c-1b.sh.log: tiffcrop-doubleflip-miniswhite-1c-1b.sh + @p='tiffcrop-doubleflip-miniswhite-1c-1b.sh'; \ + b='tiffcrop-doubleflip-miniswhite-1c-1b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-doubleflip-palette-1c-1b.sh.log: tiffcrop-doubleflip-palette-1c-1b.sh + @p='tiffcrop-doubleflip-palette-1c-1b.sh'; \ + b='tiffcrop-doubleflip-palette-1c-1b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-doubleflip-palette-1c-4b.sh.log: tiffcrop-doubleflip-palette-1c-4b.sh + @p='tiffcrop-doubleflip-palette-1c-4b.sh'; \ + b='tiffcrop-doubleflip-palette-1c-4b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-doubleflip-palette-1c-8b.sh.log: tiffcrop-doubleflip-palette-1c-8b.sh + @p='tiffcrop-doubleflip-palette-1c-8b.sh'; \ + b='tiffcrop-doubleflip-palette-1c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-doubleflip-rgb-3c-16b.sh.log: tiffcrop-doubleflip-rgb-3c-16b.sh + @p='tiffcrop-doubleflip-rgb-3c-16b.sh'; \ + b='tiffcrop-doubleflip-rgb-3c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-doubleflip-rgb-3c-8b.sh.log: tiffcrop-doubleflip-rgb-3c-8b.sh + @p='tiffcrop-doubleflip-rgb-3c-8b.sh'; \ + b='tiffcrop-doubleflip-rgb-3c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extract-logluv-3c-16b.sh.log: tiffcrop-extract-logluv-3c-16b.sh + @p='tiffcrop-extract-logluv-3c-16b.sh'; \ + b='tiffcrop-extract-logluv-3c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extract-minisblack-1c-16b.sh.log: tiffcrop-extract-minisblack-1c-16b.sh + @p='tiffcrop-extract-minisblack-1c-16b.sh'; \ + b='tiffcrop-extract-minisblack-1c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extract-minisblack-1c-8b.sh.log: tiffcrop-extract-minisblack-1c-8b.sh + @p='tiffcrop-extract-minisblack-1c-8b.sh'; \ + b='tiffcrop-extract-minisblack-1c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extract-minisblack-2c-8b-alpha.sh.log: tiffcrop-extract-minisblack-2c-8b-alpha.sh + @p='tiffcrop-extract-minisblack-2c-8b-alpha.sh'; \ + b='tiffcrop-extract-minisblack-2c-8b-alpha.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extract-miniswhite-1c-1b.sh.log: tiffcrop-extract-miniswhite-1c-1b.sh + @p='tiffcrop-extract-miniswhite-1c-1b.sh'; \ + b='tiffcrop-extract-miniswhite-1c-1b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extract-palette-1c-1b.sh.log: tiffcrop-extract-palette-1c-1b.sh + @p='tiffcrop-extract-palette-1c-1b.sh'; \ + b='tiffcrop-extract-palette-1c-1b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extract-palette-1c-4b.sh.log: tiffcrop-extract-palette-1c-4b.sh + @p='tiffcrop-extract-palette-1c-4b.sh'; \ + b='tiffcrop-extract-palette-1c-4b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extract-palette-1c-8b.sh.log: tiffcrop-extract-palette-1c-8b.sh + @p='tiffcrop-extract-palette-1c-8b.sh'; \ + b='tiffcrop-extract-palette-1c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extract-rgb-3c-16b.sh.log: tiffcrop-extract-rgb-3c-16b.sh + @p='tiffcrop-extract-rgb-3c-16b.sh'; \ + b='tiffcrop-extract-rgb-3c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extract-rgb-3c-8b.sh.log: tiffcrop-extract-rgb-3c-8b.sh + @p='tiffcrop-extract-rgb-3c-8b.sh'; \ + b='tiffcrop-extract-rgb-3c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extractz14-logluv-3c-16b.sh.log: tiffcrop-extractz14-logluv-3c-16b.sh + @p='tiffcrop-extractz14-logluv-3c-16b.sh'; \ + b='tiffcrop-extractz14-logluv-3c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extractz14-minisblack-1c-16b.sh.log: tiffcrop-extractz14-minisblack-1c-16b.sh + @p='tiffcrop-extractz14-minisblack-1c-16b.sh'; \ + b='tiffcrop-extractz14-minisblack-1c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extractz14-minisblack-1c-8b.sh.log: tiffcrop-extractz14-minisblack-1c-8b.sh + @p='tiffcrop-extractz14-minisblack-1c-8b.sh'; \ + b='tiffcrop-extractz14-minisblack-1c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extractz14-minisblack-2c-8b-alpha.sh.log: tiffcrop-extractz14-minisblack-2c-8b-alpha.sh + @p='tiffcrop-extractz14-minisblack-2c-8b-alpha.sh'; \ + b='tiffcrop-extractz14-minisblack-2c-8b-alpha.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extractz14-miniswhite-1c-1b.sh.log: tiffcrop-extractz14-miniswhite-1c-1b.sh + @p='tiffcrop-extractz14-miniswhite-1c-1b.sh'; \ + b='tiffcrop-extractz14-miniswhite-1c-1b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extractz14-palette-1c-1b.sh.log: tiffcrop-extractz14-palette-1c-1b.sh + @p='tiffcrop-extractz14-palette-1c-1b.sh'; \ + b='tiffcrop-extractz14-palette-1c-1b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extractz14-palette-1c-4b.sh.log: tiffcrop-extractz14-palette-1c-4b.sh + @p='tiffcrop-extractz14-palette-1c-4b.sh'; \ + b='tiffcrop-extractz14-palette-1c-4b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extractz14-palette-1c-8b.sh.log: tiffcrop-extractz14-palette-1c-8b.sh + @p='tiffcrop-extractz14-palette-1c-8b.sh'; \ + b='tiffcrop-extractz14-palette-1c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extractz14-rgb-3c-16b.sh.log: tiffcrop-extractz14-rgb-3c-16b.sh + @p='tiffcrop-extractz14-rgb-3c-16b.sh'; \ + b='tiffcrop-extractz14-rgb-3c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-extractz14-rgb-3c-8b.sh.log: tiffcrop-extractz14-rgb-3c-8b.sh + @p='tiffcrop-extractz14-rgb-3c-8b.sh'; \ + b='tiffcrop-extractz14-rgb-3c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-R90-logluv-3c-16b.sh.log: tiffcrop-R90-logluv-3c-16b.sh + @p='tiffcrop-R90-logluv-3c-16b.sh'; \ + b='tiffcrop-R90-logluv-3c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-R90-minisblack-1c-16b.sh.log: tiffcrop-R90-minisblack-1c-16b.sh + @p='tiffcrop-R90-minisblack-1c-16b.sh'; \ + b='tiffcrop-R90-minisblack-1c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-R90-minisblack-1c-8b.sh.log: tiffcrop-R90-minisblack-1c-8b.sh + @p='tiffcrop-R90-minisblack-1c-8b.sh'; \ + b='tiffcrop-R90-minisblack-1c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-R90-minisblack-2c-8b-alpha.sh.log: tiffcrop-R90-minisblack-2c-8b-alpha.sh + @p='tiffcrop-R90-minisblack-2c-8b-alpha.sh'; \ + b='tiffcrop-R90-minisblack-2c-8b-alpha.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-R90-miniswhite-1c-1b.sh.log: tiffcrop-R90-miniswhite-1c-1b.sh + @p='tiffcrop-R90-miniswhite-1c-1b.sh'; \ + b='tiffcrop-R90-miniswhite-1c-1b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-R90-palette-1c-1b.sh.log: tiffcrop-R90-palette-1c-1b.sh + @p='tiffcrop-R90-palette-1c-1b.sh'; \ + b='tiffcrop-R90-palette-1c-1b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-R90-palette-1c-4b.sh.log: tiffcrop-R90-palette-1c-4b.sh + @p='tiffcrop-R90-palette-1c-4b.sh'; \ + b='tiffcrop-R90-palette-1c-4b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-R90-palette-1c-8b.sh.log: tiffcrop-R90-palette-1c-8b.sh + @p='tiffcrop-R90-palette-1c-8b.sh'; \ + b='tiffcrop-R90-palette-1c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-R90-rgb-3c-16b.sh.log: tiffcrop-R90-rgb-3c-16b.sh + @p='tiffcrop-R90-rgb-3c-16b.sh'; \ + b='tiffcrop-R90-rgb-3c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiffcrop-R90-rgb-3c-8b.sh.log: tiffcrop-R90-rgb-3c-8b.sh + @p='tiffcrop-R90-rgb-3c-8b.sh'; \ + b='tiffcrop-R90-rgb-3c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2rgba-logluv-3c-16b.sh.log: tiff2rgba-logluv-3c-16b.sh + @p='tiff2rgba-logluv-3c-16b.sh'; \ + b='tiff2rgba-logluv-3c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2rgba-minisblack-1c-16b.sh.log: tiff2rgba-minisblack-1c-16b.sh + @p='tiff2rgba-minisblack-1c-16b.sh'; \ + b='tiff2rgba-minisblack-1c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2rgba-minisblack-1c-8b.sh.log: tiff2rgba-minisblack-1c-8b.sh + @p='tiff2rgba-minisblack-1c-8b.sh'; \ + b='tiff2rgba-minisblack-1c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2rgba-minisblack-2c-8b-alpha.sh.log: tiff2rgba-minisblack-2c-8b-alpha.sh + @p='tiff2rgba-minisblack-2c-8b-alpha.sh'; \ + b='tiff2rgba-minisblack-2c-8b-alpha.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2rgba-miniswhite-1c-1b.sh.log: tiff2rgba-miniswhite-1c-1b.sh + @p='tiff2rgba-miniswhite-1c-1b.sh'; \ + b='tiff2rgba-miniswhite-1c-1b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2rgba-palette-1c-1b.sh.log: tiff2rgba-palette-1c-1b.sh + @p='tiff2rgba-palette-1c-1b.sh'; \ + b='tiff2rgba-palette-1c-1b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2rgba-palette-1c-4b.sh.log: tiff2rgba-palette-1c-4b.sh + @p='tiff2rgba-palette-1c-4b.sh'; \ + b='tiff2rgba-palette-1c-4b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2rgba-palette-1c-8b.sh.log: tiff2rgba-palette-1c-8b.sh + @p='tiff2rgba-palette-1c-8b.sh'; \ + b='tiff2rgba-palette-1c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2rgba-rgb-3c-16b.sh.log: tiff2rgba-rgb-3c-16b.sh + @p='tiff2rgba-rgb-3c-16b.sh'; \ + b='tiff2rgba-rgb-3c-16b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2rgba-rgb-3c-8b.sh.log: tiff2rgba-rgb-3c-8b.sh + @p='tiff2rgba-rgb-3c-8b.sh'; \ + b='tiff2rgba-rgb-3c-8b.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tiff2rgba-quad-tile.jpg.sh.log: tiff2rgba-quad-tile.jpg.sh + @p='tiff2rgba-quad-tile.jpg.sh'; \ + b='tiff2rgba-quad-tile.jpg.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +.test.log: + @p='$<'; \ + $(am__set_b); \ + $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +@am__EXEEXT_TRUE@.test$(EXEEXT).log: +@am__EXEEXT_TRUE@ @p='$<'; \ +@am__EXEEXT_TRUE@ $(am__set_b); \ +@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ +@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ +@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ +@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-am +all-am: Makefile $(HEADERS) +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: check-am install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \ + clean-checkPROGRAMS clean-generic clean-libtool cscopelist \ + ctags distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + recheck tags uninstall uninstall-am + + +# memcheck: valgrind's memory access checker +memcheck: + $(MAKE) MEMCHECK='valgrind --tool=memcheck --leak-check=full --read-var-info=yes --track-origins=yes --num-callers=12 --quiet $(VALGRIND_EXTRA_OPTS)' check + +# ptrcheck: valgrind's experimental pointer checking tool. +ptrcheck: + $(MAKE) MEMCHECK='valgrind --tool=exp-ptrcheck --quiet $(VALGRIND_EXTRA_OPTS)' check + +generate-tiff2rgba-tests: + for file in $(TIFFIMAGES) ; \ + do \ + base=`basename $$file .tiff` ; \ + testscript=$(srcdir)/tiff2rgba-$$base.sh ; \ + ( \ + echo "#!/bin/sh" ; \ + echo "# Generated file, master is Makefile.am" ; \ + echo ". \$${srcdir:-.}/common.sh" ; \ + echo "infile=\"\$$srcdir/$$file\"" ; \ + echo "outfile=\"o-tiff2rgba-$$base.tiff\"" ; \ + echo "f_test_convert \"\$$TIFF2RGBA\" \$$infile \$$outfile" ; \ + echo "f_tiffinfo_validate \$$outfile" ; \ + ) > $$testscript ; \ + chmod +x $$testscript ; \ + done + +# Test rotations +generate-tiffcrop-R90-tests: + for file in $(TIFFIMAGES) ; \ + do \ + base=`basename $$file .tiff` ; \ + testscript=$(srcdir)/tiffcrop-R90-$$base.sh ; \ + ( \ + echo "#!/bin/sh" ; \ + echo "# Generated file, master is Makefile.am" ; \ + echo ". \$${srcdir:-.}/common.sh" ; \ + echo "infile=\"\$$srcdir/$$file\"" ; \ + echo "outfile=\"o-tiffcrop-R90-$$base.tiff\"" ; \ + echo "f_test_convert \"\$$TIFFCROP -R90\" \$$infile \$$outfile" ; \ + echo "f_tiffinfo_validate \$$outfile" ; \ + ) > $$testscript ; \ + chmod +x $$testscript ; \ + done + +# Test flip (mirror) +generate-tiffcrop-doubleflip-tests: + for file in $(TIFFIMAGES) ; \ + do \ + base=`basename $$file .tiff` ; \ + testscript=$(srcdir)/tiffcrop-doubleflip-$$base.sh ; \ + ( \ + echo "#!/bin/sh" ; \ + echo "# Generated file, master is Makefile.am" ; \ + echo ". \$${srcdir:-.}/common.sh" ; \ + echo "infile=\"\$$srcdir/$$file\"" ; \ + echo "outfile=\"o-tiffcrop-doubleflip-$$base.tiff\"" ; \ + echo "f_test_convert \"\$$TIFFCROP -F both\" \$$infile \$$outfile" ; \ + echo "f_tiffinfo_validate \$$outfile" ; \ + ) > $$testscript ; \ + chmod +x $$testscript ; \ + done + +# Test extracting a section 100 pixels wide and 100 pixels high +generate-tiffcrop-extract-tests: + for file in $(TIFFIMAGES) ; \ + do \ + base=`basename $$file .tiff` ; \ + testscript=$(srcdir)/tiffcrop-extract-$$base.sh ; \ + ( \ + echo "#!/bin/sh" ; \ + echo "# Generated file, master is Makefile.am" ; \ + echo ". \$${srcdir:-.}/common.sh" ; \ + echo "infile=\"\$$srcdir/$$file\"" ; \ + echo "outfile=\"o-tiffcrop-extract-$$base.tiff\"" ; \ + echo "f_test_convert \"\$$TIFFCROP -U px -E top -X 60 -Y 60\" \$$infile \$$outfile" ; \ + echo "f_tiffinfo_validate \$$outfile" ; \ + ) > $$testscript ; \ + chmod +x $$testscript ; \ + done + +# Test extracting the first and fourth quarters from the left side. +generate-tiffcrop-extractz14-tests: + for file in $(TIFFIMAGES) ; \ + do \ + base=`basename $$file .tiff` ; \ + testscript=$(srcdir)/tiffcrop-extractz14-$$base.sh ; \ + ( \ + echo "#!/bin/sh" ; \ + echo "# Generated file, master is Makefile.am" ; \ + echo ". \$${srcdir:-.}/common.sh" ; \ + echo "infile=\"\$$srcdir/$$file\"" ; \ + echo "outfile=\"o-tiffcrop-extractz14-$$base.tiff\"" ; \ + echo "f_test_convert \"\$$TIFFCROP -E left -Z1:4,2:4\" \$$infile \$$outfile" ; \ + echo "f_tiffinfo_validate \$$outfile" ; \ + ) > $$testscript ; \ + chmod +x $$testscript ; \ + done + +generate-tiffcrop-tests: \ + generate-tiffcrop-R90-tests \ + generate-tiffcrop-doubleflip-tests \ + generate-tiffcrop-extract-tests \ + generate-tiffcrop-extractz14-tests + +generate-tests: \ + generate-tiff2rgba-tests \ + generate-tiffcrop-tests + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/SDL2/external/tiff-4.0.3/test/ascii_tag.c b/src/SDL2/external/tiff-4.0.3/test/ascii_tag.c new file mode 100644 index 000000000..58f02ebf1 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/ascii_tag.c @@ -0,0 +1,177 @@ +/* $Id: ascii_tag.c,v 1.7 2008/04/15 13:32:12 dron Exp $ */ + +/* + * Copyright (c) 2004, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Module to test ASCII tags read/write functions. + */ + +#include "tif_config.h" + +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#include "tiffio.h" + +static const char filename[] = "ascii_test.tiff"; + +static const struct { + ttag_t tag; + const char *value; +} ascii_tags[] = { + { TIFFTAG_DOCUMENTNAME, "Test TIFF image" }, + { TIFFTAG_IMAGEDESCRIPTION, "Temporary test image" }, + { TIFFTAG_MAKE, "This is not scanned image" }, + { TIFFTAG_MODEL, "No scanner" }, + { TIFFTAG_PAGENAME, "Test page" }, + { TIFFTAG_SOFTWARE, "Libtiff library" }, + { TIFFTAG_DATETIME, "2004:09:10 16:09:00" }, + { TIFFTAG_ARTIST, "Andrey V. Kiselev" }, + { TIFFTAG_HOSTCOMPUTER, "Debian GNU/Linux (Sarge)" }, + { TIFFTAG_TARGETPRINTER, "No printer" }, + { TIFFTAG_COPYRIGHT, "Copyright (c) 2004, Andrey Kiselev" }, + { TIFFTAG_FAXSUBADDRESS, "Fax subaddress" }, + /* DGN tags */ + { TIFFTAG_UNIQUECAMERAMODEL, "No camera" }, + { TIFFTAG_CAMERASERIALNUMBER, "1234567890" } +}; +#define NTAGS (sizeof (ascii_tags) / sizeof (ascii_tags[0])) + +static const char ink_names[] = "Red\0Green\0Blue"; +const int ink_names_size = 15; + +int +main() +{ + TIFF *tif; + size_t i; + unsigned char buf[] = { 0, 127, 255 }; + char *value; + + /* Test whether we can write tags. */ + tif = TIFFOpen(filename, "w"); + if (!tif) { + fprintf (stderr, "Can't create test TIFF file %s.\n", filename); + return 1; + } + + if (!TIFFSetField(tif, TIFFTAG_IMAGEWIDTH, 1)) { + fprintf (stderr, "Can't set ImageWidth tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_IMAGELENGTH, 1)) { + fprintf (stderr, "Can't set ImageLength tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 8)) { + fprintf (stderr, "Can't set BitsPerSample tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, sizeof(buf))) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG)) { + fprintf (stderr, "Can't set PlanarConfiguration tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_RGB)) { + fprintf (stderr, "Can't set PhotometricInterpretation tag.\n"); + goto failure; + } + + for (i = 0; i < NTAGS; i++) { + if (!TIFFSetField(tif, ascii_tags[i].tag, + ascii_tags[i].value)) { + fprintf(stderr, "Can't set tag %lu.\n", + (unsigned long)ascii_tags[i].tag); + goto failure; + } + } + + /* InkNames tag has special form, so we handle it separately. */ + if (!TIFFSetField(tif, TIFFTAG_NUMBEROFINKS, 3)) { + fprintf (stderr, "Can't set tag %d (NUMBEROFINKS).\n", + TIFFTAG_NUMBEROFINKS); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_INKNAMES, ink_names_size, ink_names)) { + fprintf (stderr, "Can't set tag %d (INKNAMES).\n", + TIFFTAG_INKNAMES); + goto failure; + } + + /* Write dummy pixel data. */ + if (!TIFFWriteScanline(tif, buf, 0, 0) < 0) { + fprintf (stderr, "Can't write image data.\n"); + goto failure; + } + + TIFFClose(tif); + + /* Ok, now test whether we can read written values. */ + tif = TIFFOpen(filename, "r"); + if (!tif) { + fprintf (stderr, "Can't open test TIFF file %s.\n", filename); + return 1; + } + + for (i = 0; i < NTAGS; i++) { + if (!TIFFGetField(tif, ascii_tags[i].tag, &value) + || strcmp(value, ascii_tags[i].value)) { + fprintf(stderr, "Can't get tag %lu.\n", + (unsigned long)ascii_tags[i].tag); + goto failure; + } + } + + if (!TIFFGetField(tif, TIFFTAG_INKNAMES, &value) + || memcmp(value, ink_names, ink_names_size)) { + fprintf (stderr, "Can't get tag %d (INKNAMES).\n", + TIFFTAG_INKNAMES); + goto failure; + } + + TIFFClose(tif); + + /* All tests passed; delete file and exit with success status. */ + unlink(filename); + return 0; + +failure: + /* + * Something goes wrong; close file and return unsuccessful status. + * Do not remove the file for further manual investigation. + */ + TIFFClose(tif); + return 1; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ diff --git a/src/SDL2/external/tiff-4.0.3/test/bmp2tiff_palette.sh b/src/SDL2/external/tiff-4.0.3/test/bmp2tiff_palette.sh new file mode 100755 index 000000000..1992623e1 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/bmp2tiff_palette.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$IMG_PALETTE_1C_8B_BMP" +outfile="o-bmp2tiff_palette.tiff" +f_test_convert "$BMP2TIFF" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/bmp2tiff_rgb.sh b/src/SDL2/external/tiff-4.0.3/test/bmp2tiff_rgb.sh new file mode 100755 index 000000000..2e940ce43 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/bmp2tiff_rgb.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$IMG_RGB_3C_8B_BMP" +outfile="o-bmp2tiff_rgb.tiff" +f_test_convert "$BMP2TIFF" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/check_tag.c b/src/SDL2/external/tiff-4.0.3/test/check_tag.c new file mode 100644 index 000000000..43011800c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/check_tag.c @@ -0,0 +1,91 @@ +/* $Id: check_tag.c,v 1.3 2008/04/15 14:19:37 dron Exp $ */ + +/* + * Copyright (c) 2004, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Helper testing routines. + */ + +#include "tiffio.h" + +int +CheckShortField(TIFF *tif, const ttag_t field, const uint16 value) +{ + uint16 tmp = 123; + + if (!TIFFGetField(tif, field, &tmp)) { + fprintf (stderr, "Problem fetching tag %lu.\n", + (unsigned long) field); + return -1; + } + if (tmp != value) { + fprintf (stderr, "Wrong SHORT value fetched for tag %lu.\n", + (unsigned long) field); + return -1; + } + + return 0; +} + +int +CheckShortPairedField(TIFF *tif, const ttag_t field, const uint16 *values) +{ + uint16 tmp[2] = { 123, 456 }; + + if (!TIFFGetField(tif, field, tmp, tmp + 1)) { + fprintf (stderr, "Problem fetching tag %lu.\n", + (unsigned long) field); + return -1; + } + if (tmp[0] != values[0] || tmp[1] != values[1]) { + fprintf (stderr, "Wrong SHORT PAIR fetched for tag %lu.\n", + (unsigned long) field); + return -1; + } + + return 0; +} + +int +CheckLongField(TIFF *tif, const ttag_t field, const uint32 value) +{ + uint32 tmp = 123; + + if (!TIFFGetField(tif, field, &tmp)) { + fprintf (stderr, "Problem fetching tag %lu.\n", + (unsigned long) field); + return -1; + } + if (tmp != value) { + fprintf (stderr, "Wrong LONG value fetched for tag %lu.\n", + (unsigned long) field); + return -1; + } + + return 0; +} + + diff --git a/src/SDL2/external/tiff-4.0.3/test/common.sh b/src/SDL2/external/tiff-4.0.3/test/common.sh new file mode 100644 index 000000000..643104b27 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/common.sh @@ -0,0 +1,129 @@ +# Common code fragment for tests +# +srcdir=${srcdir:-.} +BUILDDIR=`pwd` +SRCDIR=`dirname $0` +SRCDIR=`cd $SRCDIR && pwd` +TOPSRCDIR=`cd $srcdir/.. && pwd` +TOOLS=`cd ../tools && pwd` +IMAGES="${SRCDIR}/images" + +# Aliases for built tools +BMP2TIFF=${TOOLS}/bmp2tiff +FAX2PS=${TOOLS}/fax2ps +FAX2TIFF=${TOOLS}/fax2tiff +GIF2TIFF=${TOOLS}/gif2tiff +PAL2RGB=${TOOLS}/pal2rgb +PPM2TIFF=${TOOLS}/ppm2tiff +RAS2TIFF=${TOOLS}/ras2tiff +RAW2TIFF=${TOOLS}/raw2tiff +RGB2YCBCR=${TOOLS}/rgb2ycbcr +THUMBNAIL=${TOOLS}/thumbnail +TIFF2BW=${TOOLS}/tiff2bw +TIFF2PDF=${TOOLS}/tiff2pdf +TIFF2PS=${TOOLS}/tiff2ps +TIFF2RGBA=${TOOLS}/tiff2rgba +TIFFCMP=${TOOLS}/tiffcmp +TIFFCP=${TOOLS}/tiffcp +TIFFCROP=${TOOLS}/tiffcrop +TIFFDITHER=${TOOLS}/tiffdither +TIFFDUMP=${TOOLS}/tiffdump +TIFFINFO=${TOOLS}/tiffinfo +TIFFMEDIAN=${TOOLS}/tiffmedian +TIFFSET=${TOOLS}/tiffset +TIFFSPLIT=${TOOLS}/tiffsplit + +# Aliases for input test files +IMG_MINISBLACK_1C_16B=${IMAGES}/minisblack-1c-16b.tiff +IMG_MINISBLACK_1C_8B=${IMAGES}/minisblack-1c-8b.tiff +IMG_MINISWHITE_1C_1B=${IMAGES}/miniswhite-1c-1b.tiff +IMG_PALETTE_1C_1B=${IMAGES}/palette-1c-1b.tiff +IMG_PALETTE_1C_4B=${IMAGES}/palette-1c-4b.tiff +IMG_PALETTE_1C_8B=${IMAGES}/palette-1c-8b.tiff +IMG_RGB_3C_16B=${IMAGES}/rgb-3c-16b.tiff +IMG_RGB_3C_8B=${IMAGES}/rgb-3c-8b.tiff +IMG_MINISBLACK_2C_8B_ALPHA=${IMAGES}/minisblack-2c-8b-alpha.tiff + +IMG_PALETTE_1C_8B_BMP=${IMAGES}/palette-1c-8b.bmp +IMG_RGB_3C_8B_BMP=${IMAGES}/rgb-3c-8b.bmp + +IMG_PALETTE_1C_8B_GIF=${IMAGES}/palette-1c-8b.gif + +IMG_MINISWHITE_1C_1B_PBM=${IMAGES}/miniswhite-1c-1b.pbm +IMG_MINISBLACK_1C_8B_PGM=${IMAGES}/minisblack-1c-8b.pgm +IMG_RGB_3C_8B_PPM=${IMAGES}/rgb-3c-8b.ppm + +# All uncompressed image files +IMG_UNCOMPRESSED="${IMG_MINISBLACK_1C_16B} ${IMG_MINISBLACK_1C_8B} ${IMG_MINISWHITE_1C_1B} ${IMG_PALETTE_1C_1B} ${IMG_PALETTE_1C_4B} ${IMG_PALETTE_1C_4B} ${IMG_PALETTE_1C_8B} ${IMG_RGB_3C_8B}" + +# +# Test a simple convert-like command. +# +# f_test_convert command infile outfile +f_test_convert () +{ + command=$1 + infile=$2 + outfile=$3 + rm -f $outfile + echo "$MEMCHECK $command $infile $outfile" + eval $MEMCHECK $command $infile $outfile + status=$? + if [ $status != 0 ] ; then + echo "Returned failed status $status!" + echo "Output (if any) is in \"${outfile}\"." + exit $status + fi +} + +# +# Test a simple command which sends output to stdout +# +# f_test_stdout command infile outfile +f_test_stdout () +{ + command=$1 + infile=$2 + outfile=$3 + rm -f $outfile + echo "$MEMCHECK $command $infile > $outfile" + eval $MEMCHECK $command $infile > $outfile + status=$? + if [ $status != 0 ] ; then + echo "Returned failed status $status!" + echo "Output (if any) is in \"${outfile}\"." + exit $status + fi +} + +# +# Execute a simple command (e.g. tiffinfo) with one input file +# +# f_test_exec command infile +f_test_reader () +{ + command=$1 + infile=$2 + echo "$MEMCHECK $command $infile" + eval $MEMCHECK $command $infile + status=$? + if [ $status != 0 ] ; then + echo "Returned failed status $status!" + exit $status + fi +} + +# +# Execute tiffinfo on a specified file to validate it +# +# f_tiffinfo_validate infile +f_tiffinfo_validate () +{ + f_test_reader "$TIFFINFO -D" $1 +} + +if test "$VERBOSE" = TRUE +then + set -x +fi + diff --git a/src/SDL2/external/tiff-4.0.3/test/custom_dir.c b/src/SDL2/external/tiff-4.0.3/test/custom_dir.c new file mode 100644 index 000000000..8e4483063 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/custom_dir.c @@ -0,0 +1,247 @@ +/* $Id: custom_dir.c,v 1.2 2012-06-06 05:26:37 fwarmerdam Exp $ */ + +/* + * Copyright (c) 2012, Frank Warmerdam + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Module to handling of custom directories like EXIF. + */ + +#include "tif_config.h" +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#include "tiffio.h" +#include "tif_dir.h" +#include "tifftest.h" + +static const char filename[] = "custom_dir.tif"; + +#define SPP 3 /* Samples per pixel */ +const uint16 width = 1; +const uint16 length = 1; +const uint16 bps = 8; +const uint16 photometric = PHOTOMETRIC_RGB; +const uint16 rows_per_strip = 1; +const uint16 planarconfig = PLANARCONFIG_CONTIG; + +static TIFFField +customFields[] = { + { TIFFTAG_IMAGEWIDTH, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "Custom1", NULL }, + { TIFFTAG_DOTRANGE, -1, -1, TIFF_ASCII, 0, TIFF_SETGET_ASCII, TIFF_SETGET_UNDEFINED, FIELD_CUSTOM, 1, 0, "Custom2", NULL }, +}; + +static TIFFFieldArray customFieldArray = { tfiatOther, 0, 2, customFields }; + +int +main() +{ + TIFF *tif; + unsigned char buf[SPP] = { 0, 127, 255 }; + uint64 dir_offset = 0, dir_offset2 = 0; + uint64 read_dir_offset = 0, read_dir_offset2 = 0; + uint64 *dir_offset2_ptr = NULL; + char *ascii_value; + uint16 count16 = 0; + + + /* We write the main directory as a simple image. */ + tif = TIFFOpen(filename, "w+"); + if (!tif) { + fprintf (stderr, "Can't create test TIFF file %s.\n", filename); + return 1; + } + + if (!TIFFSetField(tif, TIFFTAG_IMAGEWIDTH, width)) { + fprintf (stderr, "Can't set ImageWidth tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_IMAGELENGTH, length)) { + fprintf (stderr, "Can't set ImageLength tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, bps)) { + fprintf (stderr, "Can't set BitsPerSample tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, SPP)) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_ROWSPERSTRIP, rows_per_strip)) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PLANARCONFIG, planarconfig)) { + fprintf (stderr, "Can't set PlanarConfiguration tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, photometric)) { + fprintf (stderr, "Can't set PhotometricInterpretation tag.\n"); + goto failure; + } + + /* Write dummy pixel data. */ + if (!TIFFWriteScanline(tif, buf, 0, 0) < 0) { + fprintf (stderr, "Can't write image data.\n"); + goto failure; + } + + if (!TIFFWriteDirectory( tif )) { + fprintf (stderr, "TIFFWriteDirectory() failed.\n"); + goto failure; + } + + /* + * Now create an EXIF directory. + */ + if (TIFFCreateEXIFDirectory(tif) != 0) { + fprintf (stderr, "TIFFCreateEXIFDirectory() failed.\n" ); + goto failure; + } + + if (!TIFFSetField( tif, EXIFTAG_SPECTRALSENSITIVITY, "EXIF Spectral Sensitivity")) { + fprintf (stderr, "Can't write SPECTRALSENSITIVITY\n" ); + goto failure; + } + + if (!TIFFWriteCustomDirectory( tif, &dir_offset )) { + fprintf (stderr, "TIFFWriteCustomDirectory() with EXIF failed.\n"); + goto failure; + } + + /* + * Now create a custom directory with tags that conflict with mainline + * TIFF tags. + */ + + TIFFFreeDirectory( tif ); + if (TIFFCreateCustomDirectory(tif, &customFieldArray) != 0) { + fprintf (stderr, "TIFFCreateEXIFDirectory() failed.\n" ); + goto failure; + } + + if (!TIFFSetField( tif, TIFFTAG_IMAGEWIDTH, "*Custom1")) { /* not really IMAGEWIDTH */ + fprintf (stderr, "Can't write pseudo-IMAGEWIDTH.\n" ); + goto failure; + } + + if (!TIFFSetField( tif, TIFFTAG_DOTRANGE, "*Custom2")) { /* not really DOTWIDTH */ + fprintf (stderr, "Can't write pseudo-DOTWIDTH.\n" ); + goto failure; + } + + if (!TIFFWriteCustomDirectory( tif, &dir_offset2 )) { + fprintf (stderr, "TIFFWriteCustomDirectory() with EXIF failed.\n"); + goto failure; + } + + /* + * Go back to the first directory, and add the EXIFIFD pointer. + */ + TIFFSetDirectory(tif, 0); + TIFFSetField(tif, TIFFTAG_EXIFIFD, dir_offset ); + TIFFSetField(tif, TIFFTAG_SUBIFD, 1, &dir_offset2 ); + + TIFFClose(tif); + + /* Ok, now test whether we can read written values in the EXIF directory. */ + tif = TIFFOpen(filename, "r"); + + TIFFGetField(tif, TIFFTAG_EXIFIFD, &read_dir_offset ); + if( read_dir_offset != dir_offset ) { + fprintf (stderr, "Did not get expected EXIFIFD.\n" ); + goto failure; + } + + TIFFGetField(tif, TIFFTAG_SUBIFD, &count16, &dir_offset2_ptr ); + read_dir_offset2 = dir_offset2_ptr[0]; + if( read_dir_offset2 != dir_offset2 || count16 != 1) { + fprintf (stderr, "Did not get expected SUBIFD.\n" ); + goto failure; + } + + if( !TIFFReadEXIFDirectory(tif, read_dir_offset) ) { + fprintf (stderr, "TIFFReadEXIFDirectory() failed.\n" ); + goto failure; + } + + if (!TIFFGetField( tif, EXIFTAG_SPECTRALSENSITIVITY, &ascii_value) ) { + fprintf (stderr, "reading SPECTRALSENSITIVITY failed.\n" ); + goto failure; + } + + if( strcmp(ascii_value,"EXIF Spectral Sensitivity") != 0) { + fprintf (stderr, "got wrong SPECTRALSENSITIVITY value.\n" ); + goto failure; + } + + /* Try reading the Custom directory */ + + if( !TIFFReadCustomDirectory(tif, read_dir_offset2, &customFieldArray) ) { + fprintf (stderr, "TIFFReadCustomDirectory() failed.\n" ); + goto failure; + } + + if (!TIFFGetField( tif, TIFFTAG_IMAGEWIDTH, &ascii_value) ) { + fprintf (stderr, "reading pseudo-IMAGEWIDTH failed.\n" ); + goto failure; + } + + if( strcmp(ascii_value,"*Custom1") != 0) { + fprintf (stderr, "got wrong pseudo-IMAGEWIDTH value.\n" ); + goto failure; + } + + if (!TIFFGetField( tif, TIFFTAG_DOTRANGE, &ascii_value) ) { + fprintf (stderr, "reading pseudo-DOTRANGE failed.\n" ); + goto failure; + } + + if( strcmp(ascii_value,"*Custom2") != 0) { + fprintf (stderr, "got wrong pseudo-DOTRANGE value.\n" ); + goto failure; + } + + TIFFClose(tif); + + /* All tests passed; delete file and exit with success status. */ + unlink(filename); + return 0; + +failure: + /* + * Something goes wrong; close file and return unsuccessful status. + * Do not remove the file for further manual investigation. + */ + TIFFClose(tif); + return 1; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ diff --git a/src/SDL2/external/tiff-4.0.3/test/gif2tiff.sh b/src/SDL2/external/tiff-4.0.3/test/gif2tiff.sh new file mode 100755 index 000000000..6bf9a1241 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/gif2tiff.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$IMG_PALETTE_1C_8B_GIF" +outfile="o-gif2tiff.tiff" +f_test_convert "$GIF2TIFF" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/images/README.txt b/src/SDL2/external/tiff-4.0.3/test/images/README.txt new file mode 100644 index 000000000..17f6292ec --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/images/README.txt @@ -0,0 +1,29 @@ +The test files in this directory mostly have dimension 157x151. +The naming convention is + + photometric-channels-bits.tiff + +minisblack-1c-16b.tiff +minisblack-1c-8b.tiff +miniswhite-1c-1b.tiff +palette-1c-1b.tiff +palette-1c-4b.tiff +palette-1c-8b.tiff +rgb-3c-16b.tiff +rgb-3c-8b.tiff + +logluv-3c-16b.tiff: logluv compression/photometric interp +minisblack-2c-8b-alpha.tiff: grey+alpha + +BMP files (anchient BMPv2 since v3 does not work): + + palette-1c-8b.bmp + rgb-3c-8b.bmp + +GIF files (anchient GIF '87 since modern GIF does not work): + palette-1c-8b.gif + +PNM files: + minisblack-1c-8b.pgm + miniswhite-1c-1b.pbm + rgb-3c-8b.ppm diff --git a/src/SDL2/external/tiff-4.0.3/test/images/logluv-3c-16b.tiff b/src/SDL2/external/tiff-4.0.3/test/images/logluv-3c-16b.tiff new file mode 100644 index 0000000000000000000000000000000000000000..d43680f9ee954fca6bfbb7ce5d359e77047848ce GIT binary patch literal 166 zcmebD)M5}|U|?Vb!7#={+(0HXkPQ+6Vk9;bkj)Gfn+3$oQ1Oy>1_m}L+qZ#%L6DIJ std9ezMieRz(jx|CuVP|g5JyrY0~H6^6%1s9)Gh#G5D)-ECI%1$0G=lX`2YX_ literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/test/images/minisblack-1c-16b.tiff b/src/SDL2/external/tiff-4.0.3/test/images/minisblack-1c-16b.tiff new file mode 100644 index 0000000000000000000000000000000000000000..a8dbae7f27c29a3fc59c64d69fdc0f60eb5067bb GIT binary patch literal 47733 zcmWh!bzGDG_q7WHF|ZYEMNvO?fQ5m?#yX$c2BW1zx;wVP#>RjR28@m+-JOzRcNbr~ ze*FI0zk9u(d+#~-oO3NLXYHFcOJjoLv7Uh|n4XMF%qW&WtB5IK9Ak8_jO}3NdZZe8 z!f;2jAv)AT-wr$k>wr zw;^a{j45xP&^R+Fqf*eDwm9h^Xz3|+Cb?EQFLZw4u+iZ#JBw|@{^y|Y(Bcs6(CM7& zOm_O^(9c%b+uK>&tzs?#5|Ps}lU2VuupM`^9sp0T^3HrVKN{AMY7`q%WZOpS{;%ih zK-SR5k^Q$#hSm?R8VK(H+TYY`*twypUA?!+gO{C-#7S znSRb8uOrIBrotM-EQ8E^cRDu(4aoP^zHM%ALwb%5h7X?~I53bkh#Gt_Xg_2$7&J6E zl02?>G}O~`&CGHlW>#xM&G)+UE=ZZ+_l!N?7DTGR%`_sIfQlubgnvT+Lq0%-PKAE# z;37_DUSH|Os{6I_hT9G2>#2<)Ehk%sTVA$k8lB}LU$dLV0kE$r^wMQG;&);^w}XEu z-6LaP&dWk{b&W=;NmdRiVoR)v18&zHS2*!p?m6n)FLN-mYq6u*1+nE0%?=OQ5+|lZ znByh3G24S(<#5J+DN_!!VF-TfE6&HZPWO1!l!{LHOT&3N0u^_~}PRn>`U#FRa<_0_!Au%_r+{b&+SNbn+Olh#m7X((D9r~*mA zeRwxyNw1;*1hS#k$lu7=YHFWX?~iVH(5UZQ&#%6UftLf<2QkC91`qX~?KSWD(tE6{ z+`)+95Ll5vzi+yurpdL=tLhv7cNJWHTGX4lu%svUBR%ALB{~Y%iOu)?73q^2nb9j* zP{1s%D~+$Jsotpy(a>wywLj~AHx@L!Z5XciQP1Y)yX!Iz6Ye{h`OWin^79SpOs*7` zNLCh}sc^6ItVHDd3eU-0(Pj1)wo1nl=Q}Qt$AsU%&?VvHp=-SC8P9-wP>=0mw!&7( zc5~3!#n|(l10B^)?;R=}ma=P@m8`4?uVRDdcb)bfJlUg=l&FWfPPGeK_q0>`&x|p~ z7L9Ul+YaUrZ5gW>np4%9W|a1`gjRE~AtYn)O+}g?LLEoOfxbuf_#CUVpNxFRot?Qqt2nQ% z=yXYH#jC10icVFL@~|4xOxB4SI8Bts=mxL4`$dax1rXO+@3S8W-f_!0_*xQ2bU1gp zyr9CVYNX1f!l1OVa98eXxGVK=!mkuH-y{RdnJRRxpj8!A1(rtezc`zbd7vrdB4Y*J z9h?R0GsU(iZRa!AGK-nn$YEwH(o2G2dHAMmr08+-L$9hpl-#JkwIi-~g)%5L!h5fS zfRRYIgql2f5uX!Ua~IcjG&dFuG5Rjwz`Un_r%1@N$e*ay)HVu2kEHJgH-Z6B4pa@= zgLTkbcoY3Ol!buMVq&*lW&XuGd+$b$S>7fL?ie^Wi0-fMxzzHq&a-xzpo@_n@I4?s zIjm?+pS0&<=cb7exmd8c;G`nArdQTnc%{m|>a#Y*=iPaA=$~Z$v{GS2mTA6aQFMj8 zx?LHnF;!J6iq%HikF~$*^Xj`AMjMLjWu=xrM6={8flhr<+r#7IPVkRrv+|uwx0n4Y zsVQ4hN-7;Jx*$yt-J^I@R9W)2^k|7$c~{kvYQFNPYO%^r8=3#W+0uqh)FT|nzr$3c zy0I+ke9}e2H{u4uQ^F$RA{>k0i66tw!Q#=&@o${i{;zTm)$OW17Ro_6ngw2ovx-C? zz(ANmRGL*V_O;`aFq)qZB?3s(@d-xMHHxw|bK* zMa5D3Yt6KJHNJIU8+SEk*Y{~RQ=V;Dp_6QDXTP^91_{pFxsPc90aLlN2INMfIREDHF6=bOodjWkGMjU*J|~A;Lmd z!Y`0jNIr6n(Z)PP-pw$QiSDc&GwB)W&~L1%d0rTlwT*Mmejh&2dL?T*(;;QAxWD{T zu|W1OZKxLRzf|EYUs%4Nak}wiqoBb?w}-cK!bGOI75UHPH;V>Jwv~P;E3BHW z#%jv6Nj10XwDk|_2z6U39|`HG($)Mc*uZM;{*+(Q_mZFROGM1f)1s$o-_z%(b@33v zGSRw-cujlN|CBeCuIi2IH;NY361A=tr|qgW)#|H;yx3-QuEk#cpW_L(mkYSy!A2S{OA*CaIBTvoi=8(90X-V7%>9a(kkvr-R zs|>XMHNR`^>i)LPYlFJh_kZjvYYC~duQ!SCzWDV*-Ia5G2L*EOxtQTtLh4oS6<$a* z&$$hgaVh0$gn8Dr*X&dFz1PQlRpC71cI!cu6Lu@!7Y`Dr3CHjtX)dXR@CF--yN4Si zwv$rv5Af}zU&N=Bekytf9d6Qu)St9HG&H~m^#4J(0TDP2$^Z%Y1}Xpv z2%g14K9gG<*5%*Va3o8Up4nYt7Tr1&`o*sq)D6OvWTc-f!I#|2epGXy|9xX>`?f$Ky*r}@#sIT@}Af5QdQ5lQIeYf0*4bZR~Cjc``hX7SaiPYp*jg1W)_ z1C7q@(?jyXE2BTgKXz@ef1oK=Jn?h6C_CRq_!ossN{V$#Ih*!Q=$f@Xt0Zenwr8rl z-SzW!rqa`$W}mN|0qx@EgD23ZF@~sV>@mCvK8{Er-X#i&yYNbk52n$k2(u6CV6)Zc zJtiM_he#qDk?s&P$U0<85{Dc~eoZZ-@1-xHy#v@#!VE*X1MPs10aM^7x*zx$NC0CH z9JCTK1e2Hpu>!XK<)daMoS*5IiHx9O8sbYTB`1I4UaFI16{dgC==BQ*@AQS%c-8!` z{bhf{_~dv>e_iwE8a?eh(W!VTuSukqgyb8`b1T*>Q`NWBOVxYSO4XQVp5|{^QvRm2 zL#)_Ux;r1ooJ+qixFV9I3t~B;VX=agW69@}&+%KuhPihNn0XF~e;Xy*^oAV`0S#Tv z%Njp5oM~aSudQFL5~+fOETZS>b}KOCZqj({bmAF7a;7Hhq_i$?VQ!$TGmn%-Vcy+* zLr=K~-m@cSdqfp>5_JLBg*u0}#jYWoCv+25;UD2mv5weeyeIaYO*nofb_}!E<_vB( z5hksprjqWHzEb*0QNO-YM3kcAg)NGs*d=?-g4(U{he>fzRq!Pz6| zAzF8F>&u2q+LNUNoJ}H$6q8phH!WLTeM}vyQD}~7H)*=mM1`yxQ}j36BEi)re0l15 zWh$7S#>Zvs<|hjVxt;OuiI%Bm+zKHrr=h^Qs7cP_tZ8A_UaH$#XH@gEW=@^BWo^4) zP%x;i-=`Rk{CnW|k(Hj<_+RnF6ovpVnv+!`{g@|_dF5}Av1Ic64gu=`by3wK82g3O z>!HAe*xbf_!e!Y!x4BEWM>vI5Vy$rcHvO0;%unn^>@`d?+Sl62MurW-H{ke0A(cVd zL!2Uyk^LyaIT=FR2Ic>ks%VV=vbplFWUfS<8 zjKGDzTT++1pWl-}Okr{p(#OO#x!a2N6z)vuZ2GSGS#v|PUX4*@HR|2IG-5QKKeDl9 zL&-YVj2+Ku#oRp!K}q##4>LO@mQqz-Yo07GG52(Co2)hGeyW$*3xmKDze111b~;aB ztZkNJDX66w1@0HV2v>$r!aEZh2&q^OCJ>{Kor`{nx#pDWatW=E^CNsF+#@@Y^+*zO zBl$Y{3%!aOLEeu2jc=jkQOv+WdL!ru-Gin;JzzVS4$$c7fR+XT(||8H3>(`DJPU&9 zcAdyZzzN}mwAsImyPR!R$S7edAJ+Y-t*_PVFunb3%6RJJSZuFZOK`(j^XxW!{jlbH ziD6D|{#^OSigCqq%^K~UnpIj*JEA6*PZinagPDnuC>(a(-1T=|@A8(V&E`6$y-8<@ ztg|;{G$wtHx92#gJr$2i9u;3G+8^WAbWh!{ZPT99(zVmt_>R#5&(5nYFKStdo;Ma> zwF}yq_$o=8eo@GCJEe-mrZiLK6gSFekPEY* z^YllAOuVVh8|*K#h_a1#mJWez7@=ut?`JlQMO0mCFvW!Oll%>si-^DghQI;kguoq+ z0Uk0h!_+(3*#)shu@$B2_&QnR%Fe05oYAwRy#u@2;O5N6ZB4$d^PAjjz)AzzsJvai zsoYaxrP0(h)fCqFXeSi23t#4nGScH&cKti^7j89N<~PRO&9mkDrhOC8_#A$ipfq_Z zrY9K@uFkQ_dsS9bni=h_u4G7F|m>1 z&GF}O&A2sa*e04_Pu_w1>e`>(*o2dbEL8pHV;57}VI-va|NJ@@C1Y(uvYtWnZf% z)hZ2C^PuLWcC2E3?y3xvgkP?9|GijFUJ$-7G@Ql#oF2x#%~{P`m=PyX30@?Lqw`X< z!avfdh0|rRCA%XmwA%8X>SBdiHBkAgdUN$Ng<)j`FODHNL&c0nvS&V{)y%ecS|XK< zO0SBc;+T=H$1M-^OBi8ZnC+`G^_=ZBDVyVGyBp9vuy-&TtO#RnbKcqjU5d%WWTPW& zVr=%13@D$8Kk4Yi^}-!3DRo0(k@zHX1@Srl9G;0sffWolBp22PGbtZQZ^=>V-|*=HG4FMv3NgiFetLDqIz)&{zG|9M+_2 zv(>Y6-*In6J#%#aPoe|soLsQz;PaRtJg0OUo-sEqb(5e^kdyh1`!KGHyG_W=HkQ3F z>o09!b%*@&eHpzyeQ%+Y0;tNZ7_K}foNZTq-u3Jf4@UH{*riF`{1Z8uIbm4@k&)zM zcizK_M{l%|!7GTbHr35cS_SgHx_ zB7L0pot^@eKqp`ics~6%J)Kre!&8IkS#%!Nkd_220LAp9)E*$$;eBMNXj;sbnUr=Y zH)++{91T%pp|PmNHRv_wHENp58}Bs#X}#I(pnX>2P{LQXE5a0J>VcX*?WC%$|xgVK3$6E++m)&z}$l&{E4ZH*cz9_J)GH?6Dl?niz_@j&F-DN_o!UY zE#gM&R^3I0hFb&O!ml9a_;=tp@4>G29Dt;0@F^nv&iy^R8XMc>tknfqg(F&5AXVWSd<(}abd@F=LnTj1 zQ|KsfYG`$o`n!!04UL@EEv4|a38e0AGH9lHg) z78xwgnhS5S3n%eDrZ@8n(-tPrO$!hdW%`K~f;DMZM47o**a}DB_j#6oRQyHVtt(I84NQ+DMm$K=7u?T&lBp8Z=iL|r9*&OP&v9mspF`F@UNW-y z2XxuvFY4GOHQA1OpR@`Wi#>=%Vb9vUL#;)-ph~UhSeRKpqh^CvuIjjFssAdf+fBu_ z#MQV;LKc3E+DFYH<0;1E_k`WJHI!S#X5tc}KCzydMw}wi$sft%wDa^%_!aU3N=9ZQ zL9hfC+di}tGJ=8s5H|c_$+>-Z=D4LT{RTX0nLE2l=_;3WcWbZDI$`*+{i2ROil;K(e!w`?bi6 z14NivM2scg!cSvw%`mqe*d+8_^e&rA=+!nWQHkVg_94F&fg^>(>c`5>KBFi*LOkI# znMHXu!aR%|0eDm%&<)lDTsjX}Op5`lpyi|y7QgUi$yg!3d`CrMg@s~8bz(J7^|0nj z?E>wN+Pns@#>I7q)iRZ#!c5aubGF`Dds4Mnfe-q=V%hwzMK=~cTv)j{dkKE=*`+@0 z*W4~1DJ_M&J9RR8ZB$y?N0CwHHi3@NBHy$GQypK$br0q2<^_sA3!aNZC2dk#fl%(9 zxt!GDB#r2dXiI&RK~4jbzHnzr7H1p8MtYcAZrN_6YrEWV&W9W4oi3P9UNbUxW=%4S zsXBxloGUiMW&{(B8AdBmG|L^<5!NQw0vlaFrpNJ^WmP0aNVX%1kHZrdkQb8?;23>A z|_ml#E^r)bH^bO<_(G$BcdF{1!^hunobnELQM z#y-#qXayl?JG2n^0$v3U(#FA^P$YHIURLBuY$JcTj zch$eD7uMvc1FFxfOX?K$xpn5MfXYm=;q03W(Tgh==`IEr2^Z%sU9)5D4yG}zGBMjG5R(39~MLEAn+(ww8oj~{@KIR zMMNQ!21)KSD!>iu7TR|D3TnvAMthX{o0>$c0IgsI8iX%1b>Rc>L*xx(0(=VgL$5(5 zSP1w6Wza3~0DJ_@h9(e%d4Ou~eZ8utg&qvs=ZY^Rr#8!W`l6yt=Y7CB2&NzL~4#L}i@HG!jo{N6P&3)AK0>_NkX$8iHrVN53Yb3r}ob;}s1_ZAPtAaWdO8?njv+xC;DXJT$YFwxfe> zB2oWYbz1$k5L?o40e)!5)YRw_|0-hQZk!m$#4_>6h*yc#)aNt<>IvEdUtKX{b z(s;I?X*R3htEm(j8VY8uTrjjidW9?|&riSCqKCRwu&J7k-VTpJBz6V4E z>PDJJReMg-o*7G48E<{F|B=NG_rkE)6#vwqlrWA%>OktN)Z&x}u{(VegFN}cX{wBR z*`=~Q>L}%FmUYa>#O-Mt1s?=oW+olApeD~Frz#`SKRQw;$6&nd{#hmH{maU5U$b8N za_O>pI_kOq_AN~{aM=w|Nv^mjq&UhnCKbOJ8-jpVUaTX`K=>Zh z4)OLe5Zno zStcRrG+nbvmLl*-*qemeyvynMj736~P%qO`Bu!6F@{RQ2UdWi6VUc&Lbe>A07_oa0 z)0Tkd4hq&}yv-_;K9>ziY%-4u{DKz5ewLfoKg+)4e${-=_PpgQm(?#d)2UlXp5KF` zMNB(~({1qAY$|MCU=E@}t%oo?n`z7thKn)5w9DPZpu$2>xRU>s4Gtx7E8tWSl#iU39WTAv1ij0QRYO!7Ir4{;9B zhhR=9rzBIIs6uKH{Q)4EnNsIqGpZxei~5;*9=Hsl!6VQ{m<`dvDkKqE0kMHj$O6V9 zQ!FV$LSk7>jAmpVa}BZ=ae&>y`|v^VExZMYhqcUh)-z^3yTw^RVI}V@JT4U#Fv<^V z2^9v3VZH}_bDihdFSh&T=;EgDe#t*8{A)^Q+A`r0QAZXi{*e7wM$LK|&rfXSPYBCJ zE!m;@OA4OkLwWWx+w3oy)9H7Ut5Z#~*X9)!mKTqBEaRSuKEoMLJD%Q{Ih{=uPYPyp zUfFD2x#`?9$e4EHOqPE3a%A};og5v*#r(ORw%Otl=!D}O;Qfrk8;DLq&9NG{TxBtB z>5hJG!$Xx|R@nrjzgu@&cVDftGY%Vx+M3&5E2wWxSxUyh2Y?D-U-y4nf?L|T zYG7^0it|g4=(H|jEeq4}URVdRwa;U=;BvwFBwvg>dJam1nuoTsv9#*2+Ky_%XwZMq zQ78p^1O=hzSaZU$(S5u!d8dL>>k&3UTm{bqa70Ujn4lm=5D$`mQATOj^ncJO^2=ji z*omaK;g#SB!JN#ZdIRR56TK9eQ8j^IGaPs$bP31;SwIBC2?>J>7_XRpjLwYR;9&3vxSaM0n1Z4~Zv>ARFdnh&?Y7x*ZHtf?7=V7w zFp?|ws~Ekk@627S`F5x6mcaQlis)gQt}7O2wqtmg_4dx=W0&es<3J#^8a(3g#=ALW zD%KLaqk# zV}^3Po6_q!)v4_B&=aN`_=5rw1?1T@3GD)P0qq3f02x8`wkI7&oz1QTgUjQjo1-Jsw=$B}7kVQ_rK_?^u{vY!K5LBx6avpS5ek>w5=E^Db;bFe`o|X9>>`( z$j%7MGLz1p;bXP(AM)UmuO&`}NWqSxpA~o2{`DK%6}_~s$W~8PY{^LZwqkVt+`_@! z|8j1M&oEM>U6PK*K>3u;CSIeP3k@;8plhdpbKPEjaLwhl7uP-95U}yV`hT1HZ?#t7 z^Giiej{7XktQMh{V%#yS(U;K=(B3FZ>ob-dYc^^js@WQi9!6s<<}k(*^pf6*wia18 zXLfATE^?j^JhDB^44~d4dy~c}C7>Do8|4vr9zip_kRBu+SdT39*`IOR)dAf*(+tMu!Y(r};{%O?KWX{UxZNOh2EV5II8O zG|l+J3V}b`@tDoXHhLfZJ2U;Xs}5@8_M@%Wp3!arGON$PS0{?~bgaD}UGLH?^tC@_VG?xmMCc z(3>cu$ebEeSDI|ty}4_1%(f)`Y3y;iX-R+toBr3c z%W9Ri5_KJ2h}nP{LvOUUL~XXpvc{lRqwCSTtcuagtnRv$$G-8g<38i(DC67z*WuP` z6q7{mXRQQ_DE?H0+(PjJ0%+d!H2@4JAunN9mIV?HZA4}}Ir5T`ulSSX9J_JMwQO zx^*j5CZ%oV^D1Pe7jwM?j?w>+explkKdg^4nA{w-zd9wT;zRyxVJ1ft6@#)tdtf5a zpHL0xP@ApRTP(j@Z$$-L+oQ^?vrvC++~Etc74eCoGSMdC`pTI0_FhycUA}7u0S{1D zQ#?tph{F^-?SCW!l@5%6V?Y>EVS60ufE=KAbeo8M(TB15Tw3sqAvgXq$V%MK{~9+MF@j9`$=ga?wO$JNpXs-GP;VIrgR9 z5nw0Xnf}hv$#hf)v!1#8^wHU-YtYlA1J1KO%R)}Xa8mlxvV^B|-sP9%7Z(~X|4C=%8fVk;JQ}9PZcRnpd)M1uW-hy(Uz7G%#R2wX=A?JUuTwy*sgqdy91XMlWtI<`{Y} zs?GYhwPc3R?Y5#?rl7}cGBK&wwtBpc9lZ5CWnJFsobBav+cyl%>fT*{nmtK!qe_VG zL}$`65}mr9;z0`r+QG^hzcj$sn5lxhkX3*_)W$ObG#C+O2USMX(DVUgWFcb>tY!RQ z3`36aPGli#JL?w`;dipba5R7L)4=6Q3(29z(VkV^FM1|Q-I6JejXy~) z(<*B=Xnv{BRGrB;=g*CIu@AZIvU7`JVC>D}%3LR@Px|E~!;BQR*JVGOZ5S@P3AMwz z*{a$y!P3KWC+f?!eVFG~AxG8+mnWA;88a3=fP;kL0dg`C?kXcGNvgN5!(YwY`&6jkc}yCDTY8gXarFa72_DP z6S)l^hW{cO_7A(;j?1*`C&|MVx4k>P)cij7*t?1P$wNJ7le%rk7!85kDo=hw@_O%J z#`ugby2XC`fi*fK8*B`W5BpqMiWGY|`(KVY6&IKKOmK?-T5?57%TrfO)EsU*+O?>z zscK!>A=#_amu)KsB$c~FM%?>pzPY+}IwKpW_S~D>->Im``z>N|S9a{FcWJDw`(CH6 zyIC7k^Pq0AwoakR-v=wGrt}tGBRVE9UAI#Y(`j~btp@efGD*aNb`6OmJdIC*F zxmvlKr=fD;x7I7qJVQPL_fAjw#<;j%zL=oH&q?22v{akX(xw_OSzJisJKMDp>am@; zizE!CmnNs`QdR>-P%7-mxa<1bGubQ64huBdwIzL{P_R$Pe&k8Yn;Dnd7;T7$3M<$T5jiXS9ey`p5hC3T4;)jn24Ounp(WDGHkh(4Uq+1_b z0WE~SI`6dHweJe?|8=^ zWmi$2oLzAzA1>V9?ZDS08VR~`o2$~>b%uSK$~a}7TU^3|COJzw3hHk(Q5w$Gx7Mp_ z(KU0lBPwp`q&PXo$%RTZx-z++=eVu(Rqp3ZH*QOcOYFJmjJzPm#S3E?5!%7}J?855 zAaYLN;NlUfp9`qRb-HMnzG2U4HrU) zr}WdfG|`O8WC3geA0iu^K7{W{J?6$o_EO`6&EX3uGI4}hL5ZRs0Rtg#|s5Inf(F>IDEfiPeU*^3>S5wMH)(`*?BA4wsr_6R(OU6To~m$>@^>e{|HGj9Ku`@( zC@-uj*!qCm+*=pYZY7|Sucgh7YY4h6iV~*=Rz#JSzfn&Vq6%;Vb;B#|df_lGX8-r<^0H%{8G{S@dQ0zk3fZvlkN;20GK?L!yV@c~U^Ap; zdb8*6Zq~KiW_&p33LgEKJrVLIRyRH^)hB&kW`X#!Y(l=M=2hR_;kUPK`z;#`3#al2 zWw})sOa6*amUeb{Dz{0jB3g)FuB>Kvh6g7v;t?}-IOJ|o6R&w`i)$0AzOn9R&6xUs zWrXbPIEf<`B|n?BOJd*~?^hC?Q!SX_eu_UAFcDA8IbP@p^_!4vbgiCSwF%S}hT_%f z9sV2Gr&9PrT;f#3wa8P#Te%^Ami|A>j>_9|v9)ehRwX}*UrI@(`?R0fD=pedN@^Sx zq28JC1P_9*Y>&Hr^T($G$xCj=L7S^KEgrgW|8Gjir z?9N-FWI@%NM#;d1QAzhc>7DGW?dg31!zaexj(H4cHgpwymhF_h zEBRB*6pCWkD#yAcfqr-|;Gw%i#Fu1%Th4!lb60;jcJ5!8<=lX0(YR=kUdMDNXT$+WS`Ic~ls`I&yJRt0C z*jTtE#*CAY{y09_Ul|4D+N6{wl(kwm(8@wvhx=C4k}E%{zm?Lor;2xD|HDL*LdkXj zk-imp2W?;;^Li9(C%nt~=w`$6rH-?g(2cQkiP>ZtEg2}C!H8sd#=3<;u5_|^r~5*xsfgQyXJ7+Q{wm?Y@y$WdJ$vfD)I<;3r^ZE_r7*x zhQ+vc)JXCKdE)T+kA_#WJ9&1pcW*u=*|Mauzlq#9S;wonUR|0e4T4C} znSMj69)IDH!`U)-`I8*u%<>fP(9r}@#&lju;p*}`(8IIGSxEldLMvfWRAcb9=x6b@ zywxIuY(-wI)GLk0n@Eu-D5{x_!40jArOnOFc@0n#sS+^U1L>*q_dKadd$gh;P@+y*7`ZFra!g+0k_>A} zTy}2m!R!k%atTMaSo*g#w7{{DSC}W;DqmkVS-Gylx;kI8w(x&AEQvq~q?G~RU?ww- z-4JrKA?kL|;I-1XuH#5H=m$>O;7G2daAE;+7}oAZb7l^XFg}6E^vmp ziK%H3h;O0K7GHCZz3wj+S zQHyufA{NefVdUOKQZhNiSGYd&PyXGSL;Z8d56v)}_d}l=_Z7a%zman*N1h(WT#hRv z{z6~IyWN@)XGjeb7IQ=bR@SRr3U8`Mzu|UcZBu7cQoT@JEq6{4(BVV1>z*&yUEZMg zXITyHetDuyos}sx;RW$)vLEGevof+;i+ajjT$w4!($ie$$in!Ci7s)qJol`H;tjcB z`9}F`O03J-nx5LVm50lHEB`5)RW~Y6t2Su+Yp*KYm8G?XwzDyB$o8~r^qufoW}JO+ z#Df;v|NZe<=fKS+vCy=^Z?Z@H0b z_f@pCHDk&=(<-!wYr?-Go}XjMTi400CDvma{xtR0(Mx9xL`tI}u;j(^mwFpl9a{5L z|Gj5V#p>KZ!K2h%4k|NT+$I_pLD@ukV%0n8yo8sT)m%m5ljLojqBI{tuGk{8Pxhej zf_!r+vx2AjRWnwVQcbOLRQomFY6@vgoXI%e(Ris2w)=R*+F~$HvTV zSvvOOZrDg<#vnTt^rZa%pMr2Z$fl%8N&!tplY#MI1T-7m2^%t4w*D@QJWt=OalYhb z=XcTlk1NX2*zT(>n<;d70wmMT=q7+Ivav&IT}(sa5E6ihU^(Ba4Yl~x#K=Jeyz4) zbltsu6ZcB1-PX>eU0n&57-QUN@={_qWh>2`8cA~k&Vi3$0&EPAAfa~8oW)MB9VItQ z+#Wfg?e4OS5f$8HchA;@x^8A$-Ay;SsiO*-EPQ@LwcU0Tr!@)0mafd!4?h%QaSO<2 zd=0RUzmu>!X;~UsoSgkr9;SHHcw;DfGILThxLor(?_>5&DYf8?`wvo8)Tfp+V-N3T z-u^3m5yXpe&vctotdsf?z26&-|7spjarbnlY@^~0&e;5-xkTnIOA2R z`=lwN65;Y_PAW&5Aa}1@OMKu*W%G-;N zSACngshF)gSb4nst#WRA+T^;sUx&Qgh8p8)<7>m~vuu;_I!HHb2Xd7W1r2&wbB4-a z4Jq$N-A%7Q6fyxd(QgyK+c;s&h|eg4WJfAYeMQ?reMsK|Ekn*QBrFu`t=)Y#-O1d5nLm(Q2o3JH?VGu=xDBkNV8FtNIW5t5PTXs&W-gE3z%)K`p$U&e zzIvENE>1X*IKeH;BrxxRJrSn$O0?w`#s>u+k#)XEf6+DWnqdBm`X%^7o$8fR|Y!Sb7Z ztM073pEa;K$&{%AKH%TmIA9}Z@?di*exz%(0&)PQ64Zm7q1i~Qtr<(gp6hVV-j5|@ zu4COm-ZAtTkL*eTfcgTopsk~7k>BZy2a@kZ49N=jI)4Zp@i}YyW0~Hjz5^G}F12Vy z5BHKw6mt`x_*=ww&y8zxS~DoP(Rg ztH9M!;$#z^uHdUwn@3`q#mYi5ecuI`_kc z*qX_2qlQ^K?9VaG$>Eq~*npX9lvNa6;y3cA|5pfrlk_Tj0%MYOit#@?mc3-=Dx#XX ziP^$D!nS4S(eF|^p+!J2&6+aoVpv%^-Z*aB*ONl9L%SL}l8tZZcx`!lP;GMM`X0id zYrg-(;0+;OebR}_zDta!fS>n< z5KjDf@(JFNOv{|sytA->ctB!q(t!6XFLdCS$nt29WN%Jed|BiU5~P23;hrrfoXu}7t|I3K`8Oa5F@m|4*$SY@i9#}kFzN-vX>)2S` zU|RoPt5@1m(xU+DZEId?RW%lM7d0PLJG3O_2%`wQ9KHg42PHFp;T8Mqw>%}x=J!K? z#tu)UR>@qOkuIvt<`{Zl<}%<90YeHRj*)W60Ih?TN7scfutr(i>`vOhw#VA~vS+dD zZU5O0Lvd6z$YE>)TxnP6?<4BkpO5|-eycY39Aq}L0>P$DKFhakJ$mHu#p_pEtRY*1 zXTNuTfF?|5CT)|Psmz<3lc;{ye`?_DphfGAy7hd6Q0t0-?q?&hW7nKVtX!P)d~gxR zV)w*J)Ba}d$yVm!$@%{JIrCfp6BB%vdz}w_9Bvzvm#`>y#Fui~Tc>K#&}zGYlSO(w zYRrqY-5Ii!_SmPXDJi@pC(c&x-(-Bqjo4DDxX$wRjM_IYj@Q=nL*ZHnmP5;eu36oX4t)8#$#v$zS`+}WO8;_uWnt} zThtq07Ugx@mI>b{9<+3{5E03gR`M{>kGP63NWMeM0;HfVOUC-jI?b-LUv8gcf7;d= z3Z>@)YB-XifJ{4+>R~FZ+?EFGUEXr;2*$+g@{~mnw9R4V z&BLCb0=7iVi-}8b7RLy$ly`UT==#z6r@6lj3<;GGnqR!tBz_5n!+v9zqrJC;j?v(tX*=U7 zyn$4mxWJe@aZRzk5mQl~(Wuz(QS=Cd#0l~LBr7wC8A6F(E=JBTWtHHSWDQnxt!BN- zy4;}nP-T1dE_J&0M9miM7fpwDv3hF*F7X$-jjo}$fR^A*C>P0ae;2hY*)@G8t0z6m zz3X+{wt{6sR$675KfLOTuO%%eTp{>lsJL;;C7KcVm@$lWGZwJ+vhd7jGitIMU_gHc z49z%*qi`U6+@~?ip?SgoF?1GwO} zN5g_fP*T!vQPkINf9kt`;rZOp9p_xv_uTMdBotR9eTjG*Y#N0H3JctqT$CBmS~hOA zRJW@0SP$+(pMx)RG-@09D^ z{#JWHRjSX_$JPJWaI{vt{9lPtu}X1sfk$~kQ(lcML;}^@{s9AQ`+z-3I7*)BF79h# z_A@I7)JFtHM~3js*F*Com~kW4E=!$f4z!LNkNHk1qY4~{{3Ce&G$W)ubU#8nzB!v* zLd>lzo~c7uU(YQ|wzT^Hc!E`%}Qhu#cf5VM5`>VX!T~@+kCA=!39|uwN0HVfx80NX~P|RySD}At~vOajK!O1C>Jl$|VRM7uS{=yOOKD zYuIeAY&Yfzb>0a4n_v>Rkv5QjBkx|xg;Iy+rN+tFoG|_BQ>2yaw>J&9M>Yz&?)5lQ zG)oBnU7@}?cdM>6dBZ300>oN7w%?%NScpg@KHVT*z-KnlI-tk4R#y17BF(SjgFK-s}NsN1A6TG z!n)i09x)S!lg9pynhn(q^^N4P4!BY5bF5{K5KCkH`qWx`h&{}=KhQk5H+VOQ9cmF5 zn`)99pQDz?D$_1B&3>5nIc_|nz`xyn#iPaZbNp=K_wrB*v3bo~&|@Wl5qv2a8JrSQ z8*(PZF}yc|70HO)k5~;aO-PPCQu}O*fBDJkO#g7@ViGQFGsrk7$x}ztQ-CTieu{K4 zRMj5v5-b6}4V*OavRXBcH2tTiX)O_!miEGER?p0#Ki-*g3opl5UAeqfzs=ot->_Mk zSZ~_PoB6NdOp<>Ir@;Q4;%6MQ{5KPWQ% zY2@=n>+~1tUvt89CUd7!kx7>#_miW_`jAE)Z#xpZLb-8Ekv#76Ud%t63tmCqAps#l zmjb;*KZHex_C|$Ae2IJ;0S?d2zD$@OB1|72+e5~s_DABw-vkMVPMDtI<2#}(>L}?d z1G%KD7@>SyjjYl^#UoxtIa+t_mxxo)64wM_+}}8gr4YNWV5!^d+PUI<13D z7wEd#E!M+gW(>)W2TasXK3FK79_F;Ml*hH%#S;ds^JAObC}^v>y|;t!6wkqV5jY>X z8{!{Ek1>xah|fzxr&nhkO+KEio~V(nTeMcTP+(sm41>&&7O%{qSKG-l=HBiPym|v? zc>U|Uq0ho_A#0&m!kFRhQQwn~G_{O%P5vGaK?Y}26MUj>hWZBSh9B0yY+)aU5sVl4 zBb9x!|Kxp{!#L|N-I|2te`urg3S_h2@z=W08UT+{cHN@9DAaaT=O(Q6-eMApeG zDQodJA1)Kx z<6?xE=Ym12-0Rb~h*2~pOusQiMi$JZ@q-8njoonGs1g8{UV ztKrMxSrOt90^z|C)sc!32MHA!dW}PUR1Sm+FI7ps81cWb#h_zBN&fYD`2$`d?MMB^ zRKy>OX^BEk=AMK|m5RL*G(I=e@t9@Ka$})7Sz`}5N;sWf;_$i7j^&Lt(2Dlf*X0X~ zDf9c+JvSf9Ojg)X=%3hezDI%G!{fuQ<71;MtUo*#{qUIe*wL3-f@`bvQ1%#tFi)yJuOXCL>XNh?g~VEJLt@KkE?NMg-njo9^1J zW2{x7C8p-9Of&0=hDRZNH*A`8-|M{47}c~;zHS`Yehr(6*n&b@QEeHmTW#mj7@Rio zELDfjWgP9E?M)hLAE{=^&52EiadbGcY|f+_SD)?3jvpOj^JR#bZn$y0(tXE#g}e=X z{shd2;=`Wuh$Q{!`eeKGkra`Hg!qHlTVYL)$5fBDci zk#i!i#CnDA3Lh296RkYqE8$rGZQ$MT^^uV=&&g+Vfj63$TdsF%V^KpxH_kW|(v4<*!AkDeoP{XxCc^1A(8foH(`1nrG6ogV@bKhF) zU3;gB)g)?ct6njPi8P6O7Q*L%1tnYqa%yiRo>+^iz zJlHNs){`9x)Mt3m1#B3{wov*6(c2zrO0+ z#K$KrC7dI)a6<0HKOqSbxImTCAodm0V$f=6W$fd0;`Q@O3pX$~w{CPV2`-&n9$XLK zc)j&(dv-@=TX4H$`}GcR`^|mtq4rQ}{(Px_<^}lC27&r1$ngrhsD}orMaAtc>HJ=m zrsY5<&GKu8D)CBwZa)&M0&VSo7}Ws|t|e$$Xew*e%B6W#5hE}dY$_rT_7`~v*@hB8 zwV~HKHb@&309CB>12cW(*@PYYC%bggo%5Ze%h{UzJ{2)lHu-M^I?U%UX>rc^jyvAX z++Er;+UJY^ZlG|`8t=d?3$u?vM16{>OKeOOiC>71i)IEo`m~nM71q=)arkaN9zA!P z(TFe96>TGmzxH^v@&JFu7Oe4N95fJyp?0=$vv!2(3 zGo#LQ@ZT3QJzgYu=fnjOxCqbh0w|L1cPsUm4F-*@O-3#(EuCNLS^9PT=ym-Y#jErU z)mzrv7kBU7HoR@N+q$!{^L}gLVO!THA5t#1_(`5N?jZu*Os*VAZwq@+)!bm1d@&%! z;etUbpj&5O3$2j>?)7!{{q0n0#ML^`3f4&1$<^Xh%e?qAO02ycgX$>8DYqiwKjBe` z-{{|HJM34=F^V|RvisfOqjB@`r>qKY`IIX+g3aM1bDgJ{Qyk9kp+5s6ZcOuCdpT!A zcWtj&uM}TQfJA^%@MuU@C?h;JnjU8tZ<8{XbSD89ofQ@pc-2Lt=x@PJ>ErH|Rh6-` zvp?7+R#dzDF5aFqeq#QUfe|5D;RPXyJYGOJ*eXOR%q*-U(j%Ukypy2nl`VQ8ID1~^ zYDny-utO)y4`-ZsE(jLXKk-{A=7UZrW+4&+SU z!e(#d9xnWgQIo@W_c*WfUU7b=zF&9@kDt$PU$W1JuNQ9x+C`iXn~oj}l8|}NpCFpnoX+nDlW^A+N(Dpi;^XRfN9S4IIdr2$_P-rp$bpeKCJy!Rv;> z^4f;;X6iO>w{`Eu9&zvE9^dw}t;8pdP0}X&;b!S6h4uJF#B;P+v34w_Hm~Swc((_` z=CFQ*&Nr<9%@J)P*vv)TdDXZ9_!AHSRsn2iC2O~89jHB1Q)vk0b+0L;db$kZR~rnT zj5ywE-kOQ}gzdupBMh=^Cx>|-_KQOj?dd_RvO9N zkfx_^UvJ`ok2`2OliZ9vwEbm6onq9|>ysDbc9M@JrG$xi^0|Tio&8}K~>e1Ue7)<>TUo#oE}rr-;RH>e)=8Z!c!=pl`Brj*!%P3Gc$VTH;_J3z z{#oA#GytdpTI(5G3fPO9mx5MxJb+lhFCaf4S;JV%RS5`q-nvE!r({!ZQ8Mv+_y_1t z#B|FkL>Fqcy$PR2cj(RUV+;qeLRiL}3{F2=fUU(*;^Nri6ZsR&Q3;B?ag_nY!o)Jf zrqt=Q6UwW}j~o>lm>mcXHV;(~QxCfl+~oSrJ16aA{;8V#&@c+5M!xP6#JS>cSJq~4 zPvN{2%fvLty28fYI^J_DGCb`^<&Bc)g6DNFTR(R>^bwFg=^xx#G8H0ziXTFwkoh>3 z4q=iCL8;>e#=2>w&@%A#`O)$^4 zes7;-m*;rK{ej;XAFgkQFT}^hyVCKZL6;Rc4qy4V?jqtW_9aPLr=&lf@{C&2Z$bp2pd%Fj z4d;kQ<9^~e#6(79&nUBQ6f!Qw%HY^={3c_jdDce7`HkSG3pREOqjsvF6UnNu)KQB9gxS*bP4AA!nl}p#_UR9k&FE5^% zkL~)in@h>FzwNRT@IEp$XD)9oa4)1J!Jz&I;S6d49fxzKCNph@%Cmbclrk=~^kH=f zql7xDEEP;55iBr|A(VUx4;#tr;yD%St$*8UF_s-dwBhcn%!Hwgkuz5_+c(%Qk6^B-Ew`Wq!-<$SY2k@{}{-0QIyi)L!X0 z0(5mXbq)a$`i1%tV17`KZZXghcw1*uTSQAhOICJ1N(uj!=gl9bFOe0AKtgCoOh;Dx zDpm(SMChVucVFlo84MVk9gSzja^2YINnfrZdzfp-W=+`*a=6>&0+;%)RcO5d9@0Lf zO$DCUnbVY3-Bq5wrf3)ie5I^l0*hRz<%ile;+j+1q$u8970iLkzFJQCjT%cfZ1HT* zizVXqmjR+~j{{<2Z{?fBz4ccLtW1}INH!6X^~C$+E@B`lkCry*iHBxJRHE8ri7zSr zv@hg*az5b~5sWfy2ueG9?WUl6+&%a=I1zaXyV-%Gz&p2kZV%oWksi-xTXH=n-^{Eo z#ja&;W^Jx*#%vy1Uw@#T_Lq0(rFhFG@p)Y-bjYm8{GICRFKKV7N6=l;PEhA){nMGz zyr^{zC<@vH`hgR5&9(n%D*;kqR)?D6L%K?OCTarfQMD6=`@Q)2+hfNk ztM=aKZ<`DTkdk^+m;qsdoT&0bdT~d?I_5n=o+w6sOCRZe*ZHX5rmMOtr};Hukp}2- z?L6Q4m41|3-to3|zr4X&U+{)4tJ%FZ0iA%2!^INysqeZ9yAub*hmMR%jz4D^aBt1^ z-8jG8xqM_9f75>1VQxy7&r-N6dG@Vp9s1Pykl8Pw3h&EEYTnfRu6aQ< z7hDG3Hz4Y%fsX2Y0u%wbI`;vxT4b#$&3b@Kvm5bLk5*R^HI48Tf0f`z_=>xWSLk>` zil)8p{nL*hfQ}_hXitc6J2|NwHx`qVIQeyIajJ^DGDMwh^=KA5eJ=d`1Gz5>epgQF z6xl}xJd4||9YpX_9;O)*NCoTwMW*wh zFM>%NoZygYui8hNnjV}5hXA>*Q->nlvjEiE655-G+#@SF!oq#FYn_8Oc2b#&6U$wdb z=0Ib;OQ3iivW|!LoOYy^n&zH%wbp$#qU|WgkbHs1n=CR?Nj`YLjv}G}0Z*tSs#D%} zHujke0EW0@b*#n-+$5CC;wZCHIN?+0rhiW6a+xD`!}X3Cnr}e-fC?=)K&U%k6fXT% z0lxHIg=7&X`IPsb%|f_m>owTta%K&!)DX8b^m0sKHWvQ4D86Mb|1vyi2suSznJ(R1 zJ&0u3kZM-TH*KH!e~qVR(9760$#pg88cHJVWM9}QX!QHATW`!@Tz4;Ki|jfu6xwtUBc<&qUu|ms`C6xSQVc zI*3i19yk)kam`7UFUzg8s(KH5+3rp8>9ZKl9vL3q@6Dp_5qyYiG+pZLp48!6-m4L;5r!jCodL!ZX&!yI!G@592-)U?wh+R?Xzz_Tx8`^A zwneu=qnBXpSgxq2^eLOFX!-PkQklx;YX53#9iicU?Vs|_!k~PW!qozoIB3LpP9kQU zco_30Io&yvys+{XKv>v79veI)26a2N~*y#P7_oOIiOzrdN`DG&nG z4gLuF0n7oxbqjQh0aJ>V$$2;_s&W^B{*x+1_9f?%a*1Z729h6RK&GG|ePQqk-VT?qcO4vISOh+&CvEh= z^orpxeI3vM&`T>?DL11OeXo>dNkF>oZ_}81f&FVtcUE zCuXL^Cx3BeIBDFynYHP~>4EX9xZCFQvOpcaw8u4FkPpq9aA=ourviyih^8b_14xfL zoXKU(AJ{w2>`Mt&UiQluuuFgi?I>&s`Lfphje-Cs?7YiVO2*4&_yso?c2FL`Qt1k*3 z1;yw+0_EsD&|<3`$vTDQqhvDP(59$blw=B(VnE)esnE}LyLYpDRr`a7!bg3^+2f`Y zKc_;cBsfbP;VF+<;~CoQsey>%UvjTczV@1_aH`FL@gbav9I70RK__(O(?n>1PIC9+ z(0Q&o*T5C-VB%(>&Zlr$qA4b^(Yv10rh=(QeM66Sz8dzN0^Q=SHQjWX`ZRYB?jClo z$E#(~n;iA5bcMvpm()3D{??)1>uD4!zoQxhxzyT-`GR{#s-)x)599Qyd^evwU7dZ8 zO-06le;-zt_@k}scAJ+zrVtPsXb_OG;buPU!Q-cU1|i-Ucvot8D9#dnLp7Al63dKYz%gWN#cz;<9TxWVv~UZw#}uL-mV zsscsn&~@CjgH%m&?J&QH#q^WZP_hH@Khh$ph9XG6&>h=j)2r3jGZZmWJif$w$I@jt zPFYTZIQ?APY2u90w9K3#Bh34bc%#a0R%GRedJeo6$t2_us;FW#fv!lNa}Vp!8?0sf zubjjv_{QO1lR@(H#xaSog zVDMslx?lb4vMg;=vk#7)uF8JjvWlys8qvr<`0pM4)NT52`UIV4MAMy#7nZ**yvLo! z=GZ76O%pA=eBHF(xx#7J5$UPnSZvj3_Q9l4mui&iuHk;gxx{(cHp(I0HNY#+6Xx^F zkL1Vir|QKp{^y$R^vY4(w$En9s@meadA4yXXk2$t*A?&uIBnQqe8Lo>{|59K`~y@1 zJgmD1yrA;|aJq09Mwn8*A*LtR*esSJ?-r-Q zvE!<7t0rfruv0nnCm;=~c%fW3jq0qr*H9${0MphHLul`?q1>h0bS4hyj9{6HROLEQ zvFgk;8;hwh$vZ85u{ZY?Os0Jwf3>?Avw@u@KNyXk{PjruBUt#wlG9Q)Jn=&Rx;K%V< z79G7H-X!f0C^myx&RL1sidoJW?dkbz`D<&~O4#D;v}~}p{f^IEu6QZ?(0Cch5BwT^ z%l&J-E%a-g-|>uIj#H++sV$#Xo7FwD_lAQ&Ss(#)4|vhY#yrb9AZu~u?WwZCD%&fjXkmQ&1QOfc;u^?uLWe(S-<%f}arx%+*D8RV8ZZX-_(8%{e3 zO^4-FpEtZ5Xb_#8D3xrLVqD@_Y1lZ83?bYg^HYktkW3@yLf0e}-X%{IZ5wZWq4(hM zh@`ZPqS`d@tkD(Izb1o*72qe8qG8g$@Aaf0RG8qeLFQMd7D>@4Uq$=hg=_hC@fqCU~ojdx8_gxy5zjJmLy* zpH1gXFHIK=oz|B-mY|fK{{$w|`m&YKYTkCZxe&5mH`1hxKEThDjfrd2%S=4+tKJhq zsmK$IQD#{WhOFiPqSAmOLcd>+hfNX8`n?AUoR1qCE164oSal=6YE@z8eb;(tItx3$ zvtxs?wuD4%3Nt;h@LaJ-@u#}ih*NkW!Uu{D-I)HT`%1sjU{03=`47DmAyAK1KXmMe z=v&Fs3%4{Qbh`jtz`7Nrgy4wkMGZtGqwUhPpbDdp9vo~e}O=N z_YK`i7h}6n%MXsiF2|fmb_AN~>(uwux3v5&%i&=Vxo?HmGg>iz&^{#=lo zlQ*ZHPP?I`uy&jw`H}hp;72oGyoyhqJnU1CAYWZNYrh{kG_{9s43Dya2SAJ zRa-p!Y29^<2K~?w-vAnMD(NobW3R)Y3iE7#%EbJX=*B<%Ox%a!{Ss=Y#?tt#WBD)T zQtA4r$^37H*R$VcwPtnJc)-@sx?}-r7_GZ6pV`*$+0X2E@BP}TPk)XN&*?l*6+9(U zE!uwOg4}CmltzpeSpMTB8^B%TG1J2~sdhh|SKMK)=B{7dnQk&3Ywifoc~7{{Qs5Jx zP5{_`$tKhIhuJyD66Z5^Ppl>FSL}uC1Wlw3zZn{vJ$IP5E;i@^KhpEi`wzGTT+z`~ z$+f7c`-p9!f27Bdj*y;_j!?*yr_^VRH$9wzgrU{ZPF^D3C3YK&!%>^`oIJ-p#ckuJ zP0n*>#@^?pivE(i%=8g;1UCiyF=Xno``|LZ}= zfU9=5Y>!zOm|e8&v4cANvwLfI-66?}V*1KJ6#U-U&E~xsL$6f-tzHf2jP8=w7tM9~ zUoJJx`slsxz|PAg6Y?7AJ4Kb!K^te3_tp=>MzCX96GwSD@9>GMEKe?cvXJ|dd!8G{ zRU5lX+w%`NvJcoSHE8uG{3H&LQaYjuK}czMAo3(~5~G@|mu>m)nAci3a)o39mKK_lDxMp8KIon4KiuG7qx(O_=lbm=5)G`PQ#;nkZOgA_uXxFO0f z@>}eiWb(<^r}iZ)WCiSU>?G{oT0^Y!?Twv{T{qqNy*OSK9`8J-y=%Q5dmH-x3{Of3 z0r8nHS!~%ET7b-KtN_+WZO80|9M0M0n%~xcq91XQ zLm#qv1+;NQ#pPrD6!v1rReT5W4fYuP3$(434~c3WYTa$|u5+qrD1nt+DUGg`LWUr< zP%*8aG1S(%mhHB4?M1CHYyokYCfhLTAuWnLZ|9+(XO^vy>zfbGzt-S}`Ay(MUhR0_ z$sv8{C?L!d`%w>3ZS5TF0bw6+L~`$9_8&|@XEGMCbEn4YnDdOI{WjTZg8zh!g|7>H zh<1xU5&JHlBu=pmbX9g7w};!?I>DTsUCrG-c%Ae<<@Lu$%=^Gw+3SzzFJI>b>0B&0 z-tvNhk(rDMze$lP-9pe}(XzN${2SYbb$F=RS5pUycQ^rfk&HM0h>Kk?u z_lsbMTO!(0y~%p`j~$srYhnfEP*2E2JhOUAVzK82g-aQD%J|x&T0;@Z;BhqHgbjs% z3mp^wF8EfL$8=lU*t9#`an^Qz>0IRM#)Ym3>p%{U5)PG=U zrq^q54*b=y$~eGq+X7%wZ{=j(YvN)QW3UWj*6 zMV;mDC#^wsY2}OxoLAFotyxn*qX3K#sR`$AnQD!O--Iqfze684zlGzWI?z270O^4e zL49d=z(LwsSl+M>9@`j2e9^tpQ(7z`(OEF!(LlA_C8gXEJpZF{!Z1W zTph$}LvW8uQ@g}5hzgx(zc z-=zqjAbW(hzfFY0kjpivFYYW}HdlbBTcD=DWXmYsUT-NAxB1 zAL(lv;`P_Sy~ft&edgcIR7|Z+!}R10y7m0^y!5re80`QJ0ku2I(hBD;2xZPUqv&eA z+2kowKN&}^B%h0&AQg zYMsu#1I3fmi5Ad*wU_I5ArlQI@DB(r=()z*b(U3ktMAr$@N6hL#H79nxs7x{w6qK2 z!DR7{#tsrrlYk?&QZbB}&X3e)WTp?VG@UP=4=P;bd1n>SF_b7lgRDTN6Xh8ER2ca^ z^-&k17t#Bni`4bDbAevo^LgUlwDGLoq8z($C~j<#fy5*$<{v#JtR$2uEGO74zF}=` ztzi1l;y+t!$13M$w_?{Ak2fCwJe>ntg3kus3VIi46MiG(Jj4I`yTu73S&MkRFM8bu zBPLM>|LNNqhnw!0Up0jp-7%WbAJTWwTL8TW_5n3D9n}t0=9S7WY{`Ev?1Z|~+TL6BjZ|Z^mym!%)|~ylhrvfJ|;K#i$a0EiL+AC6&|*D zUu4(V-5$}F1EDmWZ`f~$g5aCvXsNknhOM zh%4*o%;1J8 zHKv(Jn>AQTJLJ3Eaane0@DlPwdS>|Y`Q-%Z1|Wjp#h{wNb9>tlw_kv?tcnZ^3`R{6 zhNEDAKrb-Jc-!opag`C)(AdCM&mZ(pw^Y|ir}o{T3{?`G zR7^Qc+M#OG_j;83@&`nQ_eWn&c{0cC5Vd#?jkD>fLng?TQGmaan}q|J>9H z#cG~5cUKuz`q$3XWY+IA8PtW;KWc!~j90VkTpJk8;>|5hn$TvXLR&TL95fB3gVnx~|^b zezhaFTfC>dC%W}*`R=H8@00#7Z1tJ@oOt%@;V-;3cNWLd{(9t=$WtL5ffQAD`#nQl zV=>ctb6e|24q9$#FI%rcPlShwccCxa--KtADaB5tS9eM-%iMwQDe4bfvyI}6Ce5@A z{s41zl9ZIx>WuY_gN)qt!$8kLJ=)K-CN#D+wXeCV$|@8qE1Whq?QFi$+(fft_)?U} zS>#uwDe8HKMo(^U(ZI`*s?ovm{RzhC`Ozg7cEWb7Y9yln6WO;VG6Q42bH-De=oeUM zSFu^AT9s1GXmF@|UB6aWQ>zXE)pga9YLD0BAW@L zceM8r(x|s)Si63A0e923X*ZuEBEo*A7v-v!u2!?EIhBsh?(Na|7_u_?2Tgur@J8g_ zhzEW5KHrnLBenZuLy?o(cZhjr)N)05@1o*})$G?;KqhO+8_AZp#c|k_uka z-!)D$CR^UMt8_E-n)A8l&G0nzrSp=cLIT5rt@D&&C&x+aA@_#1?}KM7{}>6GyfPjz zLKEU}Mk-bl2KZ>bZDWZdo3BVNd4N*+*i!u0>6Ep^nt5?xPfW z5`!vD6{dba!i1_-2U(MEZwKGIwK8vrwK_2TYtU;- zFex*eGIY^ArGmeJ)_7+iub-md1b|$zm(i8zkdaka17JW-DyNRghbXkH?{UTPe-o5(;P@0va%hhk-a{i`V8tcMem$xXk=UyvQIXmD z1s{sgRq74!`pJ5+de?@G#y9o0)rTNNh+(a6?a?}s2HWOI_*UC6${cZkc!?=Pyns2O zNF=2`&P3nBx2=P{?!ATEU+%Au{|(wp;uhY`cgssGI9z$8y02-zH49%%HS0GS5uZ+8 zjoY+*bP;c^F(WJ@<#tiqpcs4vY@vVO z)WD+Dve~ZI@x43V?|%Vo-v+;Ce-bZ2l@Lse(yg9n&#wNtcX)4!O)wF+VVXQLjWgCX z*|aUONYMGL_McqZX=f!b%`d8Sh35*1hDY4n{0)5LGi_5%!9IdP@yj(o5s4kl&Lbok zxteyKrql`S9`32@u^4zW^lIqg=zk+FL)4LLLuviYUN@RNs;sUoyUauFs+5?L#!}d! zjI{i+(%d@fhQRtewFQj~*smsL?YmlNU3Yzd4XUoP;b@Z(4A@eR%tj=`^r0^h2?#E# zuU)#UfeoDm%p0wEZRYPN?s)EHO>z^?M6$9X(jI0^=EjuBRk+u;Hi@A^@usAeo`jJU z_WbPO1@rlvY+~;^Bfsl>rviPyN2kAc(53H9pC)aJ^aS@p`Q33ovB;|nyn61ML6OlD z^JlgKwhx{7T|_)g{I~(+0B_$rKD5BxpvLeUaRkT{_T*aO7Hk=b;u?imJu$=>eKRDO zR$0edT-80$xT4@MvnJ}HR$^rny5v`2Y-#Y#4Ht0T?B=OkCrV|y$_*h6$XCQ4)SrY~ zq|cNd>Z4BO?w>tky#WLJ!#*P_BhQBCnM;GIL+|_hyZK3{kv>(m=>;w?l-XkIy3HZf zZ0Ee;3QT=QgEu6-Nf#;)HH1u8-LC#q(^O|uH(Br0XaTi??l<2>z@fGfD5M(h+IAD~ zLNe_)VI5+ba;}b#bAhw;rTJCU$*eNx@OO!rRCp3A>syX#A+!8=-DnF5fos`7_ft>N z3i@@1Z3jMfpJoiw(|TqY-juA)3*DN%O0M)fci&Cz(3Z-cs&-Ua0`D(+1K}S|EF-oSQ_-2}wD(+CqqK`!_O)L82u%U%TOb=X-zkwG1r{-yZ%k^gmuq$yWc3LBHN?iZ5;s4yhbVdFc4~a*+5Ty{%B6 zbV4q&w5UD}>fCe~#)i!{|7$9*PpYe}h1TfT2-kSlw={=A%b-}OPu-1*$hxr>Ym5&r zl^WW~WPIxD?&UCydo9OcQ@3HNBMWvM=G~Ts z`GPH=cGCG7qx4&}Ao@4jE%F}Y8m)lQOv|Nwq*&5EKrkmG1wNfhyf&$pbd92Y)4p_ox) zsFKv+t_!^@-S2vR2HCu{ZT8^xz9Zc)`+hSK-E2}A`dd?F$zbBLE9UZBiE@xvuuZa7 z#>Lzlu9qO%{!Mm0neS&1YMj5S?gC z+%E1PCV}Wnd`UB;4fhQ9{Ozxs9XrhMp!z#XT5RZF;MBb24Fs>Ph`W!P7;k zzI5l#cfH+xXZjWg-w$3KQXf?5jq3^Q;q#(W>UksoL6V=c@R+keWAzAB*=J4O$uz!^lB2 z0jrH(#T~+~5aS37WHs^)QXy`>2AtR#o*sQ99+sk-XPqNexLfI4IamjTe1@1o4O*r! zhwvXrX!0868m}&KoLq`8@8~8cQRWC6q(~x^9+@w|qpkBUqm@Nf^t592%}hZL_=)QaarQNVSrxHCl>`M|m>;!=HQulS%^a#~Etv9u_L62p^9Vi>_%`|t`Pv68g|gz5%Kngj7&L5s>G$v(yfe4s+CP0`y$`^@+NIhD+JXv2 z0FLjd=E0?Z!Uy4L(VFrPi;+nO>gnd`po24?uHKS)8fDaihkMXS3*P}z z|4Wlkt;#4&JyE1zwp)rR`&o0bT(5kl0#N2(p-|mh!77C1eJ>`I*Fn6YP0)vkROFS` z^Ke;sM$0DrV%sBB4zjB@Fdvha9D|Gh6@Mz@AgeMxG5c^Kq~d-Bu2Q}(py7LqP+J<- zoRCSJ!QCJU5uXq&+JB*&@OnfOk`if)FhsfG(VDznmEY>Jy7nLsqi3dfEPmKM zb2ax~^6v6|mKL^Yb;+gS3RYR z4m0<1yxM)S5u8iV@{Q4kzTx_L84@!IP?O^;ZF3A)Zx^) z^wiYF#O)Zz1ZLWw>?4K8^P}=~a=zvs&$yqRk)E2hS*%mSUtU^)sVS~`51EHq zBdEx~=!5nH{5!k|K@cs}_KAQaZsKN%1DKEw4a+X!I}+s=C~E2&Ux5pTLS{dB59TWl zXg5voOJ3sMIX*eOnE}5;@S(Jr+M4rtVL}{PsOUuSfvTtopH2l_&h`dEWYkxg+uZqeeaW&k{@M)&Cdku#J)-> zP39*0MTv(wMI(5-)Q=2Uwn)miw4IcqjKb_+S%q13X+^n#`Bw^F6v0Xz>*RT}xW6L1 zQIW03pr)|?W&lhYdcJP1oLPX(+)jI!D3X(v=a_RPQz3V$G^!L=W>(c!i)aXe3c_2E znAQ&D66zini&MZtT7R_t!)FoYa3`_#m`})kl{aFFCr@0stz4>(0zNZ{G@7vpu{mP@ z!xhAvST^H*$4A8PbwFLnsZe5MNFfIPt39=$CUVJtz#HX$+W4jOA#1SlrrtFpTLZSn zsv1pxP9p6j)}5R6)y{NbeO+_s*v}iQ)8%i~0n(oqt z?(OUS%tSFO`+f|P`-JH0oiTko-7A!D*xRjqEt!z6^6)e*138&BskxJRddB`PiBg$z zX_B#^@WIfPpuo@{vB=bt)W7kNc*TUNgyBR)(!F$n6xVdgwC?=jqUF+GRqoA5gd5xn zF%2zm_}K6U`U7DAw`okPj4a;GJDI(drdV{Nlvb3N`8(%M@!uk!qDSSN8s*vxjp9)2 zR*4oIY#u>H1MwZ`JFUx@c^na^iT{rvKu~LVe)^cWphWYzdsoK*`ub-Ld<|zT6>Wan zKOqI)-`uv`)X~VoE}or|zX~BVJ2tjd9xgP<^~`*nb0hO-US-~+tc;xh^6CrUl%PspRwUFOsA61)rDh$<$jb<>TMb76Kw45QcFkF>tWIg#J8CTH4MmAT z>Am0ok}1aIXVM1h`sTYtNJ#1^&6g2DvBQNS_IN%vfA#g$xNAx$8B*C2cjRB#=7*^z z<5GK4zQhhiql5JVo<$iZ^C$d?X^EtVONY0{0aLLVh3T28rCCE6&Up< zHp~r*YhHj$H&r$D*S)I<%DIsROMjTzmZ_VYSsb2!xgfC6uSmSqFi)pAtY)J@rG5>f z34I5*gbO0wPKL`VzVbn}QWX3U+K{yPt@V$dY26xp)<>^U6rm7-p(ug|kVp z_i*-d%XDjT?{e?<>F}NM{}SvR0gYWrnv5?E`|bD3L&n+Nszg;#!$OCl`v@2b`lEwa zrOSiWz5}FHZmBWAxtE`N-i+^w)hI})QT9r-sw72t#p5y9#x$Z)*0ES z-Vb0lFjJU%%>Vjo=uxCn>SNj-Wrfs)FKV5J)-~)`=f|8t_B+`Tg>=+7j4( z*yko{i!Aj2Wu0YETT%D!sX%cF5P}A8p}4yT2@ps~AcDI~aCdjt;BJB762(hfDzv4v z)ZM+Mdh_0S=idLF`{88P`}dU8|*5;mg>wPT)^Qtwn3ZkvRw1LYXPKu;S%%sS2Sw^XkSb@p6-jk9DTa^3COSBaO4ov}Sy(b2DZ@JVKuB z37}ns0F*uZRNL7M18KEtf>5EcE-9`xZglu_crBCI@X_N7uAfN=%=ZxtxEbK=%jR*_ zCEb3(j3A*T7o+k)T}$KH`Ijo0iUi3~QKz$h=N3dRPKQe52Egr>OpS-&z+}F-4`~nn95tQfoa~vJC8f-8k)BK@4kdR3dye}KdaZj|I`*1u z8WJlX7j+}C(k_6j0&u~7!ET96YeyHN$9(8@d=)+;4iP~PJH{_2X~b$UH4P^NHKO-Y zpJrXi5>JtiCr4#Qe!^c%U`yvNJYOzd`n@`!Vwy?xsi=}F{*X)${~Gi<^hVTPbZatq z#$mcrW_5vgzE@5`mVTaI!EupiseF+-Q&0b2C11&6d0(wyy+mzei+k(qR^<*sCf6~+ z!Tc1SyGGDM04;h?_ls$~6^~6EB-%#FQPEWcap;C&^73R5x+q`wUW_`{o5`5%d7<@;~EM;Qq=@7d!w1<&bK&rgbLXI&^hwMQuf*el6rJ^px_rhMcS{ zKiKzf8@Af2^~Atsrk>)?K>bkRh!K%@^3C*X(#-UeDfoog;N4!iKJg**KB=B{0>0&L zQ*_nK!ZgR55>^5$0Ghyt(09O|_5*t=^gh-n>iP(HhT44aZYLb3MQKhD5O> z4Q7Ee?c>M0(a z)t1qev7c+6Bbc+6Q=7Y7tXvph^e6wQq_WbaqOA;3@v8Qy=6l0n+fFM-hb|$f%d%_K zYWide&l>;=IL{ZY5otPR{te=6Z*M1N&*fa}@)drF*mWC286i2*>F6i!-KaMnVVDa{ zvhO1Yp!Io^haffqAb$p*DeqnONCAFX7NtOqHSHkX6}?yIp^7{vLgveAeR8jruAluW zRu8I44sJhLTi$$q&}5`;Fk;}%u-C|6q94(Hx`^~*hLa>bEjlY^n&V8DgPqfo zh02-~aJ9UsztQw!U}kh_D0Sfb$jxyOv5`oercKRG;Yg8F>O&8EEQd}Gc#K#MiFcW` zS~7`YY3c6`B!tfKM+4vjRRW_xE#M#B2lkVWBQTiX$>{u4U;-?R8ormDAGvfLmN#T(M%GrGNo?f3mJ542>9e>{M-4!v=KYTnEI=bJB zCkQup)u$#cs_y~z_@4vh0M!5uzyZI{SzS9N#}Su)q-@~%1eVyYV53m^gs5a_#IRqE z4@Xo<+N;dv^z|(D^qAPOsEZN#aW9gcGW!c;%abdui(i*sFSwlaGqjPZ3Zd*<#8iIW z4)Tjtj{FmP82SZo8h?=ZA;T``OwQkYi?aBV!74;0v&O7eyd{aLsVUq}>9Qkq^#gn1 z-MeOor;Y$({88dqFc$|xDAcfvDR94K-|n~v3w23#5p-FFySaf7PY~0{4WzSM5Ioui z1M`PQTZtN9F*MSBXc}x0XVYp1*E9t`ViIqvB#fmD!7d6^Svf^kkQ1+{gobTcfD$S} zt;eLCsY!C9hS2=0|LXAKFmlLjOo3T5=P}hVJvRM!nwywAuG06U$8q5H7-oWPETq@G zUA5_H6E5tzqALFb0ZBj`U|8s%V1WR?+_2f4oq%%@qQ!eAqAiLegwu~J!ZYDaJT=hK z>s2^wVseIJT6l&;rdZl~>~Y{un0@r~)TY$TLO^M2@o{-$$zl4Fu$x{8??nHWzzabo z;Q|TKNu%*9VNJ132~9~qGP<+A<{KBA7R(lR)Do*!EAh4B&1r36Z85E`o#F($o^#y- zy(s(GQ;qzld|9A#(r@_eIM0B5O@EXSfb-gM?sfa*MBfR7z+#l zEwt6NN;Pvfax$>dT(k6ZOoHKE*&L_L`BVjg;@nq&Xz_U|PU$TN9z39 zIqou>4g#cEv1YLa(sy!DZ!oC;&+ylYTSTSl(Z`{@Q^?=Za|Fp@tWG!Z%p8e19Q z=vZk5H!XXjB>ecE3Q_^t04_n0U?2anXn|&owGd;$A9i)|sqtSywWv6U-vgBDJGA6KqnJvziNhi(vJ`mBRVwV?GDy`6T*517m_a zV+@j>rBo&cMjghQCve2=Cg!G%Wc|&v%%fLEHmX*WYD^l0TX$Qf+b_1O5yrdnyNWso zy6?eAtUY`Z!gk`b@+u#Cex3Sc7vT3=0D~bvf-je{{@n_yH-k zZZ+dDQ85iNsx_R{ATsk6fsPzFEb^O!t;LifSU!$#2XIMLM|51I6BsM(DRwC9qySR> zEaB&SuScszqZHm$*~s`4<<*Zk4ef?Po_90dIo>=?2N8V6DLb2P~*dc zce-A;Yu5Wa+Y5>D-v?|1(0~j8JKzW~B4Tjvy}6d-CCq88Y*<&q`*5^hrC)dW$HbsS z>tGG^LO@5FSyovJsEaQ*NE?V!3Uc?I@C*(% zjk8TRNkJwBC1qp=rNt(-!~+wQQXMmFaz%>Ilo^!IR$i_#Xq9Sz(3;X-(($zo+rHaz zy@wrY%!(1H1`J3t)Gn%si1q;JT-5*`HL9H~;updke#WWWMHY4e+5v5Gcn&$VbT@W3 zBbYT?t6SpCP^Kp|{q5GBVlfs`7NG$2bEts*N1Gn)Yociav%6NT1a1S~2$SU;jUiSv#H?p^z_aLYF_S@UK{_#hNuhYn zsAs-UJnscJ#%ZRbGmdjkB_HCu!p`}<2@g#4%{VA1E*q&huADA}rhE+P4_sq%5B~%= zMU#_jQ~J_rxrg~z@@?}jXEL&zb6ypFD%vmEFL_&mtZS`(&?wP%spUp1kf7Z8w}YcY zsPl={-P2M0AB6rYzp`93e55QaDaJp?z08RMTC4oFPIek{4tAV`zP6XQNw#1$mN$Z# z5KMoVE!#HQ08GM+aT@zZ%7#OBKT#jNhkQP{fNg8-6Cosn81NpiIxm{<2=Gs$Rr-a@ zRmpnEkGYmTg#=jjiH_o4nXY?X_Xk8qhlyt6o%Ps|A~rLJC_EgQ$r*3F?wGQ^T` zw!R}mSXWTqwh|YgsL*MEB7Ym8Ll7c(AoxnK3T&ZkV)g~f<*n|E3^)wA5cM#EBWgX- z0B;h}?pf&e+($0#IH@x|Jk2l3Gd3nXErdHNIL;y?q+p~>xiY-UwDNRDaj<4kT2QFp z1^=U1g@p4-uE}aS6@`exvHZNkvcfOfqD5Qf17+5gnU%k5AJ-W+c(;)Wp`F-{y96ZR zZ&zWbff3>~mVZU`gPM&~5|qtM==>DmDwC!e$1%X+&3_qGD6^uxuf3q#p|@z*Vf4tj z#6;8huQ`|*!^^SYG?asW@i}tqgM#henx&fdn}Ln^^!?53O+~aU#W=aX@mv*17mgHh z68|lXlkce}bcS{YSI4!lc6Ib^_ZbeBk8u)#L{<`fx_Ig$@nAG#Kw)@y`WI`osSgXeNbG_0qep4=|jw$~P4; zS2R5~{b&j^erBR)DPzTs-AQ;J{=gsZ%Z5cFuR5ogR%sQg$*Pts4oF6FUpW1kU6H4c z|BoP*t3zv$iedVKQ6X!QViAb?5XxjhXd zMG+&1lY4>)8ZHjJFZuHU7X_mP>jgXjcLW!OFAFIMIh~iWx^83OcH}D+78<-B^ej?3 zGBr*!)hn8SQ$fDMHU`{{kxWicnoQqMObO2oDfjsr92fgNb1$EmcQ;o#lAuodz40af`5#ka4aExq@X7kp7AI#F>Js~9W~@7 z7uC1x~MA%Z*1-~W}bl{W%sj9tN0czgO2aPl6OC;+P3 zwb%)0?h&8c9p81YCAY%6qp0gmPj6r7kjY5e7-^hAbf3C1ZAY9Ny*eT=&M~Dn`*o(9 z=rg%AVm^2!E=l}6?;C+P{J#V>0lI)jVIL6@;c1{VDD&(ei*(4UYd)&c`&B@dx0t_X zY*=DROuFx5R3W+q8Sdo}Fcj094o($MvW>D2>S3zjZp9s^-pd?H8%n;KIPd)$@fdX< zUF5wNsuv>@yPvq0=9%+1_c-@v@lH9cETa}$b+!6&Eu*fx4qwNVk#2VG$?R_K{L*&Z z=Gs)+xtb)$eu_hq^BFfA*F4`#@j?ZJN^%m9c;*=_U$Z#NISmbp&R63@iyJoKkjId- zw$awBmftMGEOO1R7*Ctn8sqSDO;0OrD&YB#GsO~WqpO3{{XhD^Fq-Z$m?vm9B-V8s zw(Y!T`^Dx|?tIUMt|!&{l|r2+or%3{y`lZ;qpv1>ChrrAiEpOFC!dVxkNlWqBk|7? zXIQ3eCt3!YI#0o5cq{me1XKm`0YtzxK#gz=@VrPHNKqtAhSfOTqSy(FB6^hJEYX@c zzTl^LmhdmQ`!F-lOdl`wo6vcDP`YetK-}dB!+`8y`_O-JACn6+>@uX%aY;^oyYPRg z9qdU=Ll7j|DcS?SoIa7^nzdf2T3A?OThv)zQ`S(jT3u4x)1XwhR?FR_(sqNHuQhDv zX~orZ^_u%SpSZx~%F)Sj#C4L(kvAV8!Q&6!6Zv*#obQ8Fuku$NyitLff)%&@S4VXR zKf6>2w{?|emPwBZ$*9US!c;g*ek8whp`)$kTXj|uK4&r+7k@g`Fyyk&Pn((T zaDyU>?0sEisua7jIu(k;YOfGfI`aCA`s4>(#>^+8h^tc`Q;(+_Ca;d=jHypq%?QoC znK?NfH}QRlQZ=PD%@x6a%pVEx7nlWP3I7o$i1>o?#WTcTNl9vooAE*x;h#~q9^qJb zzk9*U@%Iyc2ON9M`f&!{3dzRvr$?mor0B+(hND9c122W0h+Rr}mW9k=Nz0Cw!n-aJ3!=#zBY>%M&U8geKC*}Nis#ML1Ok?i!sA8)O8;Iz#|GH z;^P&v8Y7j|9GQ!Y@>UO#k7SS5O-{&&%fuy7<4=V>h&&yAJAOFjUv_a?cG3)!54MN? z;}h*oMhAP#`9BI^jo6JBPNb(aX2LR_g(Sesj=REDd3*kD4iZTm|Y zY*T5KYb-1C20dZJagTF;<1*o9@Yryl;e5gk;yZ)c3T!=@{*z;c_Te>DBKt94p8!J`D)>n73s6x6Az~)32c}9zNQsO8P$)LgGcQLh;^eU_ zsGHbpLG!W7__yK8-rE?tfZ?!`=+tDZO!us@c)cj@XqCtdvF=Im%)!jF8tNH)nF6gJKmsevDeq_A&OD#$AFCMn-CfdA*@UT8DCaE=N%;`Y z<1L2Nak6%_gv6z4R=;TMD()z5>ZopOY<<(Q+y@@IKG8gNo0;4HN1{$HkIPLN&C1Uc z=aCB&^C>gGCU&}ywOZNl0#pFi!ZN^45q_Y(*gLUD%sv+>L6Ny9`$(=>!^o7yA>IRq z`-pmq)elUG@k@*eRbmpu2?4ZNBwjmFFpDkEEZs3aA|8yNPgY5JlEs$mle!3Hi-#!pP^ZDT+!|K ze6eG(d^VQYK2=b0USvRk8z?SZ0lEY_6i*gAA>k;sA?YJkEcs1_O|DMS^W46np5>y; z78c-s0o&vEFf=c|D2fLgffEXBi-?WuO1zgfm7SROF}W>4JLX=jTJncQW;+W&y;keBez*)dqEy1RFp!?nIh1IeR ztBs||Qmqnju)1uHTrhY>CS7h@E70^7 zWYvY}nvL@htO^y0A5Y5nUPM{>dSX4`g+ zHltR7X3qwEnuq~N_?iBo<7Zb**F4ykIYn6$Xu zR-P6`Hhz|`%;8oT>j7(+wX~h8eU76Pl&Aif?!MTw$T}}MH!#ynY#x^AFYN@k4pko& zXQz>3tO7)seQqgKyt1g~b!lBeLhDS&bZd3{X6Ihd(r6*^J4ta?eb$-ukU7e&&tT@Q z7SAuPF0js}%sd#oVN%V#3Dgp)7u%K8lyniVlK@KYO5Xw7gIVR$We;V8<<_OQ&RZKi zwg%hpLhW6TytzVkV}HdT`6at^qosm1!at>$XZPZt3}2-MW(I z>ZbS2@0y!Swsdkq{Ro;rDU{3qhp%-=L-0*sZ!DX=n*xJd^5pANg=ao<+KOI3@1mP# zY-1W@`poQ!<+wEyQ2@DRb=P*>nc#?WRdQ}<)L1WCkzC2@{5F(gpOpMq@E-}>XOWTNiJ}pG!_h( zSJq=UbFk~TQGq#ldjwQR|B8(dy6fSO{^Y+J#usOtrCI_n{E|;h$xE1t_fOYK|C}_G zd_UPW=sjlDzSAny`X*$}Iu6olM|4Z|bP3`2xy^jeAn_=tHRpMub20PyLfLRdQq57F zb@Qu+nY#T_x+M!R5*mdBqE!Qp!{wrZF;`-W!W)BDg9*O7t^@j#paIqwr+7F+#p6_- z=rN4FjAtxBmZjE}5LP=YJ1>VcXNI$_OC+?gC4Vc38oBXx+i6{U&6LJ6(=&qa3+;GR z|FV25_iFe@oC&nk;ZoL#3ZpW$oZ?d5_G^u!%|5Mt9rb-;Bljj{Nm(=0+4Hjv(@w;< zvsrTm3!sIx#p!vCrI?U1u0WATpaanou`KZtu%x7p_^gz>l&jPOFa@k9aZjcmoGQgF z_5OU6v5du`jS(yYJ?%#d`Nd?Uk9q97WqJk&;GEe(5`4LmL%$R`{zg4cyWxEmw8+ZzaohFl8U2?1VM45DDZe?ouM)gEP zP*Y#MK{d+7jE!47*n;5J<$W=MoOMuSU-YuPttc%mJ4z_n%?znS-zrxvy;>I8ZqFb&GUs{(AGq#d)(y(O%o; z@LEKQW0(c{goB&zFQjYAzf4@lm5imzbF~vybMUo($qFU}>;D$m@X zb(kMobX+~TOj@|Mgf0F6P!?u8AAzhG=4AgwfwFHtm_ln@?!JwYda zDQ4Ck=Mrq^Zs?lx+j77T$_14suBfPp->?R5UmASJF!-E8^-s z8WbvfLPkNv6E^aJ@b8dYh<~1$(dOl{9kU~)#QmxF0|D)0WmT#Bu>}12NYxOv(4bJ> zU|F~G27PiQg(lrc7Qr??4iZip&N;4Lt~&4)=&7F2!)yCK2dG=f1DhMJoBneeqb}V( zP3A=p!?Cy*&c>#uN?vxU;r+=QiD#1e%2%pRl%!WR)oV1p=|+t=6W@^JW|n7@W@2Ws zvo4Dc%jQdCOMZ)@bDGd6Tx-A`;Gwv;Buxq|RRER&KLmG5M1c(?*QErd(j;(_o09*e z10)rseoJ#{o;DMN{Ba2NgocL4y^aaP0$ofTbY11JP@mUfFT;g`4wAIKA@LN}ElQgn8PV8QE>KUIR&!gWs7 z*~MI55dHzC>fYDz65ki5UtMqDtWzyJYe)CSlIBX+zHNNUJAa%dP!~9jn*`+G!WK# zuWBdhc0e{F(;TK^1*$Rtc{B!o@k$BE%sVQG&C4wst9;#1*VR2{LPSlw&#(~xkalOx z=L8nNEeS1-EXpqm)Kft&LWUp+Xh+mr(oa%Wa#vDX;+m9}l%Ld+6u;DMi4}=lFht^? z#DR2}c#x#5qP5O<>$A{LUME9)6ZG)5UNUfTrx@opw>Rhu-tu1JxK5E(P*O-^ zuvU-?ZpJad@~qlNRpfa^&A&QCJ!fqeT}iz^=18kgR`2b0-B*29q9?N(vhXRzc#8XJZfFpaUg`H5}=f3!Kx8rKmUF1FN^?8Z~DXariajklg z(Abb%wo|kaH6E51uv7?*=MT0D_m7ff)_D|`QX4P!Sd7^bC5f672@?}j z4YQXQ_7=X(-=6iD@rO%td>2y#jf;}Shs8F<(c(8GDkYvvos-m%3=wyhNEVNljFPYx zuMqnQ#z+i_evu70udSD6OmXW90>)g7dFS5_AAq?zJ+tR_ZG&UnEYV8nCG6#Z`argz ziHJ6wK61`dPZN5!0Nin|NI6A4SM!ZViTa82U79H-dYW6h9OjiaBnN+&6bJzRGA6U) z{boGtlDcX=#1}8>^kfX z85EsZo?f57Ik!9$Hg~H?26#<4M%W5eBdQ8o5_u1@0d0zEf|NvqKnbEBMYY5v#j#>` z;w14S31^7~X@qFD*t$GP!@y9;<^yIVWH}-+Sj}a^ZpG%%_OAU$`va#xurA~e!~#mu zXVKfn&)#d<6)TMbKNlAkot6g3-8svn@lj<#Jzp*0?CRM;`3v$<=WZ+Hi_7wcNmStX zXhuwOUCnKc1L#GYq4tJRY`T}TFAHkd?*X%xaIE^M&thtvUUUU>2*3O4@b(e%X6d!+ zTVsbeZ@xSXxvPFX^UnOOU)?DUbGgaEC^wSby6F?+Dyun5$0q2u6(whtsi40wJ@spJ zd_cSZU}AUCfV#OBL|>-Aq=D$6)EAT!lmnXgS`@vEYQfN>lc)rW&JydK)2#j!%YZ;v zNLOU4eH3vZS%?G=MeuoW_%(Y0#ySpP*nyA(Tjm*hV6 zYA%|oH4?D$bGdVsXH|X)zqGSBvXs5#wbZ=Kx)MSrtX^D6B%fg_D;uv2uRNgy(~js5 zXz}FPrML->@$Pq2Vgmck?OP4H@cq z>niw){SCvr%XiP-r9Tk8pKxifNGLNfF)x3td^oJqFA#Sh*{?^eyG<8Z4w`*5?K~^E z^lr6vsd~kpoJP(f-zDdh)hH88?Kq{?MY23o7dw~ylc{2EGURid+KS0LzH&gW{!1lvy;o_2;yURnN*hsp{wu^gfu~gxs<3g~>Wo zoyVX*jCK{Ci|q4V;Pc=!;{V61&6fje1UZN3czx&0nEX@IsmI^WmkG2KR=)!}o}Rq?S4OV$_oP zD*N2+8Q8M_cJ}3nee;{->;IO93+7@^#S8=}2K@}X>o@MJf#R)vy8M%PemGv{$rAnk)@V8>T#^_D~6A&D9&^$K-XgEJcmN!_;hfNS-DWDF3J-)J__hLLrB) zYLi`=`b$5Uo>eQ?mg1H?7CM(sEYB6KyZ+Ph`C56hzj%<>II&b2vB&ds4tf;jsWMM4N?DP@C@?Bt`DjY4X{x+ z&Q}Wu7w|6do#i{^ui>Tf8gkq5g80gX-U=Us)`c5{x%o-_P6ChkmHA9~^0^*!8nHuJ zSXh3Xe#>&2h2=y$Zy2X3&wyf$*oYRz`^f)c1O(rWCnmBdixiDEo$MzK`%fjz(^m;} z;A--U%oh2|nTtu=0auFYu+ofl-rzf!k2rmwe||mz!x(7U5~-m3et*`|7L#StK{ld! z(iZ3wv>jR>U66W$8bn!GtzHdZT_-D2kmNUH6ct6&rN+^$Y39^h)KuzY+G+A1axz6~ z^%GM;sD;u*{!YF_xk*(emr!_>8lN^50^JqxhbC*>Wm+=@RqzxDeoa8 zy4Vp%FAs~*x@ak=252B$1xOX30IEf+C1GL%K$y@gP^sKqjcY~<)~OD!Z3d0n&c6iq z3mgf<1%C@D^HKS$d7kt9;I85g;;-g?#xKJ+$ZN|7;624B&UJ_LA?GuWW_H>cAC3)9 zmotRZ&173A=}zLvPmnck!2(dwSittU834ktjX8O zpD8cN?lx4ZH`i1u9CMP?9s&Gy7nI(e#(QCVl{%6CM(l z5;+gF184{;0iu|d1E&R$y!Jeiye2$9dCqcIb7Q$)aG&Lf;o#wT#(Cz<*y%r~%s2!k zysi2CMMG`}F9*E!D)1zFp2hNF8*zG`6mJ&aKrbIG4b9AIpqyQAI3Vnh4M)lg*dc->Kdj1+KL!A17>P9=FC6dd@J*!RB#~W;`Ma|1T zN@@=L1g;?we{lm5U!iQie*iDxYEUaULYk~>qNb>P>)e{$X_;cVPjdBAD`F9%bD%h( z2EKj%dEQ_AgZvaeU49EeZvL};wmd$({5)Me_FTgpo1DAs=By(CzVpA#3*3bQ`f$-6 zwak28rQ2InGr|b5hm=F6psYL=(eK=Kac-f_+2*UQi7o!k)s4+H z3PX*-O>3bmP-E#5^h@+`>KbjH@r<5K*JCU&5~;)V5ZXE|m%+m%pm)>z*9z84*IL)K z>7&%|G&0R_U1>{u8-0Ot;qTV3&GZe)4fBo2jc@ClYhG*7>#x^fS+~K-QMN8fT`-%S+Ym(zpB%SBf`DSQq3N`1lfLoripj$tH5?~xi7z}RLYPO_b zs(I?%nCx4zO%WO4eEuok>)gIv^PEl`DQDVGeP{LKyQQpb)doknin%r+peRX?D0dCF zJvVLl3kWg{fk=0K=9Z7hcKhV22?xMi;cpOos0UkZEL+7*!7niVOz*8+zxQ7f8)`H)|xD% ziD5`vqeapv3_*Gd^#a|6zQkx|FgA}iO{fiP(hMx~i$>FrnLLWiTVHmRw^p_(8y55& z26>}z>*6lkrF(nlE`PloemVAX&0hLt#a-gX?MvtjE<1#6uT7p!!;M??4Tk#q;*R>} zOvZrxH&v|Gq;Z~cj#-A)D8$%W&+4h23{1nd4#9$uLRp~S`bPL9`&aqo`6B~)0`UH3 zzM{AxbSCrd@7d=VU)C^HeW59;fl`mvAAvkYbfT`<``Y}4ZX?gQLz!Xs98`e2wrdPR z3|{XN44Za-j2wl3Hi&oFb@~mpcXV>T?V{&W2`hACK}I51kWBum$4^f?ZzsPGp+gbs z$tOpi(0^`v%@2>%jqb}9nYB6dF?q0fn|#~-mdt+9jpOTpeZ*eN#g#3WZR73cZI9i1mjbV1 zmn$LO`rnvQqZ`gF@ECN5!!y%jNT}ls?3s(2%X7F6l7d)53Zpzd-g%T_T(RdpL0CbI zAa;p)N~X}K&~wUL4QGSa_Hf6B`=DaZ<dw_$$GEshx~QNt(4*Ki+yZ*T{SMFNJ-MIy*fpG^@4rlrl!^VRWt+Y>rSn zuXghnT*3G&%gK0aSsG_spK@+T4Pg^J*}c2bGpMWRIE*pI6T6Np#F)9aVRt-m?yZOy z@NU-&t``wkJt94=0#qVgQY%Xn>Qg3c>18{Eq!q$nF9pk6jv_DtR}kD5Y3AmQO7P&r zRCrX_S0jG3uGY7~zqo6oHr$7?0az!`G;e$CR~)yuov(wpPY5FBb^6&s)z0S^mKnDe z{!Z6ZgD-RkzlZ^~(0Z;6ASeywBib=NlD0^DM)zBfUQ44F(kJNYR3Igk@_-V-oLf^V z7)md#Y#q9;wbr4ANBnXF zyNzOsd`Tfok)a9Ag-5ObNStM2abG7xyDhuP)nQJRwjUkSoU&XmIOoC|;gj%OcXkUh z>Rl14^J5yH>#B#C#}Cvel%yLc`U9@QOWJGF+s5-aU@^uu`D`J&JL}>i`CAX$){AZ6 zTI8m-e>J`;H(|1Mj6mjPu3>Le&1oW3T^i4N_nHWum9foGr$cDB=+4Ypb(gs+0n(i| zb~n(B$#tg z*@3Rhc(F!X?^*x1_2PoU?h!NKL)>ZEdd-~4wYGmF{bnp{%%J6i@0xYD(~ct?=IerhLtMIDe_QIQ&f)_` zBMMC6ACZqy!-xYo28KtpxF>qRuvK0WUI||R!hb~j$2(W=_mu9IUKJvp+>G7n-I}6C zu<$aGe5aT@loKoj=Ff@$+RaS+QF!UBH7!eV}fg~exR8s%| literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/test/images/minisblack-1c-8b.pgm b/src/SDL2/external/tiff-4.0.3/test/images/minisblack-1c-8b.pgm new file mode 100644 index 0000000000000000000000000000000000000000..0faca40f04121eb769510d9221033341fefee8fd GIT binary patch literal 23722 zcmX85hg;icvNpV%Y}~-u;2!r9+i}BSdhfl107;-Op@QhWHv#HhsP_s;^xkpr-A=Nb z_ndRR@ArRv^Yc;cY%cHam0_MK_uO-jio%bCghyTp2@g3E8XkTGMZ;6cR2q#+rci4r zWHN24@W#4^jX~z-BbXHU6AZK`ZsIQ~0 z-?O>@Slo-NtILbim5nTRJ=jC9p)*)4MlFj)XE2xyDv3zybUt~t zuIp&!3Ht3@kDtDJ`{Bd8*RNl_e6~F^A+}6yKJO{WDXyqMm6w;6R#u`gL_*WT1< z)T6`Jwf*O>-hKG;$DiNcy?(NwlsFb1@AedFHWI7Qm6d2LrV0;+;qW9fk%%R6pM8J#?$by3AAWlO>e=I$ z22z7y;r;VhpWZq(5Tc%?>5kjs%u%`C)C$xdP&;GqEr)GI6~Xj zo|}?Zio>EYRaICVW35JYwyW&>pLRF;-7mHm<`>u2me*_}e1+cP znwpz~f9uNH+B&@J_L`IaFtb%87?K@ zmzk55o}QDNomW&?T3T46bGPOem7*%)8Nuw*y!_I#ax?~AiKzzHRpAiNLBxS+WDDS)-$sU54gH$9FghlF3;4o&o{ray0*T#y}3EB zEjpReCzp;()H=OhrBW%>I?md{($dQ668r?~8*3}AX<3;pIfsCu(Qx?*i79E>nWUOr zmaeO)q_nIOU4h1;E5K)!6{t!Kx~d8T?^=yV97iA!Ai=>pB7sam_w2vlS#m4Js4e(= zlqCUg)c*SI-ixJW``nw?PxsfCaOEX)1V-&dlx{sVFQeEiZ?c1Ov-Z zs7iEsIl2;yMOT6As_=LmBrJ}ICxHKmcoL0_VY*f=;u>oAP#3;$S~cx8ufN-Q`u?3` z_T87yFSb|bMM|~SV0BFT78c;mR#)dI4PCd-wohm^!jUnNSS*$)wMN6(_UhKw&a)5i zzkY}R(^6+jQpKp4D}jJD8BNlfq{Nu?bOH}wR06LGF;-atMXjWythfXo8I6WtXz*Tj zbu|Q*=68WZSV)gBZH|rbE-hTh~c7J_cCs67wPS5Pp z3i4T9^Es8Ypx?$P)cOhD5Kkf&s||LSU9_{dy}h%yyS@K(Yk65)8B;JQ<_XmXqs?w} z+KtqUL5FUQbIJ-)g~g@ikS(aPvhvarR9Q)JS!HDv8lD-0#UNQ*4c0+1A%J-l3W-du z#T-IS4fl26NCxSc!=+NZe6qT^_4xhg4=JyOx^XM5q1KvR4LUHR-0NNkxxM9b_@5`)>l`S zcRqdo_IZE0;YPJwAXXVHHiyG*vpX%)^sAABygKkxAv`N|s)~xT(vs5R5_Vk?s-gk| zuZqUts?cTSSPb}#NQCf%l3b04;Hzovr<3sHK_<`So?hPC+<5l+ufM*&-rv~+*GoU$|L8Wc*oN~JSt#eA8{Xq}oI-&OrgfBw((P|3+4ri9;Ajl^1UK{3QyNpU5%vRbI!-x@B* zRKiOWC{WrUEh;Lo)zw%mJnawjpb8@Xt0uLM4RaM{mv?!6b7y;RcV}mFYj^+2&f4@0 zRDL8MR_yYz+DCqV2Oe<2IE7RL2#+tag1#Ws&|#S><;QD=Sm zU;ne#UwPq|6p>QM!l1yol45wz;(`(k2Hl~Udp<>ihEY*oQcfV@p%_C=sf1op4S7K# z;&4#@a5!u=j!<2NXL0lfhi_?ZZFO~ZV|!<3cX$8s-um?P^5P;mZe>>9QFYhvfZxw| zdGZN`Qmob(3>3J1N#ubQiW}^ zx}c=3E-gW)-vsma_Vzaxe9+AyS(luRX;=IX96J2-rD5fSQYlty^hUK(Z*xvfl6fMD zR4P^&$C59_^l>;sjoF~FfB3I&W@`NDBZmnsg{hdTN+b3 zs;Zy_m;ZnXNZUm+0{Ry;SW*q0f+GW7`Cs!YYiu(BgJ$Lz7nhcybZzhMZY<9)K_0Fy zFX<8k4<9&q@X&!%tx!r7BEC$kH)#ycsf8JqP^OyDn$0FN<06GWBvk5k6KdnqmI!t4 zgx?ViJ1eD<3eB{v6jGuH`3pnu?DMQHbre;UL*Q3p!E30B$_nTe6;O(CMDh>o$RsKS zo*RY{cwzzpP4jr&Gqbac3kxgI!r^f@SC$t6j;t*&_6PiO=-|P_M-KZl6i`cKV`D0v zUafUbFU&W~6nc%p3Vzq4*&L2cqZG?6CT?@y_2U6Q<<#b6=Fq6v3g`%s3`Kc`1%<_( z&ExZnCNv6Q39cFoIJg>lRHRV=fWp8~0muaTO(a7ngKmol2NJ88lhfY0g~j>#m5q%R zWOP_xSyqB$n;2Md4uF!Pg1myf9CCN>)b?Ckaak$23c|gm9+CkIu&x@K z8G=zrL?Q*Amhz)vKnOzDC6XysZ41-$3rq6|2wB_M-QL++TUyx$Lp`xSA3k)%-|z6@ zpB@bhWeTxmWLU1(=^Qgl3rz|c1fa>`bh@PV{d~S^?caN{=9u$Gj~=|xMl2~r(VD0z zR5|2oNnt@jUOuX`RysW|gn|c;31F@o2YtU1T?KX_{lB^z2l+q-&%tjZBm-g``~eha z(Y$wVZf0%?@Ebhq?$*}o>eIcgRo%6J9Psz|3%nSXUpvGVNJZkIwlUp=#xc9H$P|k- zI-SMgaXVG@160)@tK%}jcIzPV+<<=cCYpKQ;Ix_Wy# zW3AP}CobR3Z620LB{KL(xt)CzDy_q}vP|U)l~DF9Zo5U(%`t!bd#OGDPEdfq-_O5G z>u_ik8e57ggMtB3S6Eb3P(I$ToLw3LJO{3W{}PHW;1C=dg9o1>4+*#gY$KDA37tfQ z&IUMzMEWt1w5fdV>1p4>>iYJRy(On|C@+oC*flueG7eUy(|U&m3YA8u1r#je$Tb?f zcX^4<6)4n5&{_2AKAvaW)RcWa;Hbaf!Cz3EI`CXc2>^A-hLX~f{DS;UHdo|Wo2kQK z0Ca-qpt6Bq@HliOxDK2MP#9hnf{s>0rBNwh7UDHPDNVIxaxH^DW%o=ktnTc3m7|@_ z3>>w#lf#!Qv~HWQrB|fZYqS6&%~qXEq|n;ja|`uCu1uvi+bst50Cq^tuS>gh+~3dt zfL~=}GaX$5Wj8;ss05&8S!rQGe!=jFZf)B^zynIE1fYZrH((vHsuHHKA21Up34okL zGL1y0Q2;uT5#Pb%f~|}?tk`XJ&8*D|J3846dTnD<_lQ)f)f#=JM9j$ zVL~D`IXu(N@-ev*_zt65UK|)tsER!k0P%MC=Ncn{g@=Y(Sdf>OUt9wA6&Ds})(nr@ zH?}2cA|8rvB}^1p!01#Kn^O6|O&`nxbHJBWG6^^h3X&WMLI!L=rqJkBIHk$qlQ)wq zD=D3Qt<7y537~cGl?$MTM4>e}-EPmc%WSslRSKQe-Ygsi<8+z{W#8Q+{wGc!^Y=S) z)bAi+eH?{HmlhQj78MudL*qi~Z&Bg!xN>rFW4MBdLuwlshg99>A@K+x6u?VJcEE55 zr56GYl7faj?EhvjnO4K1;Hs%=X;WEBLQD?5r;S0`?T5n-+xe|p+E$5Gyp9(s9i(EiwdD@)R3UG)R*13 zc|9Vv2z~%o`yf|3p$25@^mwK`Zkv5-W$)?Z%_XnXX)`;FdVP&hBvI;>yg_!z>C-_0 z0RhJYPaO-hFHN=}01jrE!UE{_h=qkk1p|Ft^X}FHok%5ME78>eir^h-wd^*H5>o-D zLa#>(8@{@VR13jJp)l!G$X!N#J&ge@8`3SRFhPMgV>1h@O3|$D5xz{LF~Sfw>G4jx zVai_Fdiwgs<7F?*xgML@Kp7K_JD)2XtAmf9IeX^R>9fC{KX;*L)}>?R!fS%-AnNi9 z3yTVii*qRgv2Jqj*%}*9qgG+iSb)5Eq*dWa?V9>xBmkl8L2rO^N2C*oRC+B1D2Ul3PmvHSzMEo)4ti6sVN`;R+pc=++5z;TXxxO zR^lj!`{Xr;RT+Nw*4bl$zh1m}BjL{;zmiy* zU4*M`1T&YD)90>U zyepY=>EvTY#n9@DAsq_fMGK2ch&;iNPCNJP^>Yt_0P{3(5tRt+Ku|iddSt8&Mja@7 zKTLz1AX6w^zQ<2ojl&kl>f)4$PGmZHH8>ouHqr0gtw#yPmF(65u2cmxpbJXc^3uH5 zy}Z5Xwc1Sfov(lW{o3brDW7g`BA9P=d3nxb?N7LL>0H&6$37vFSLT+LAkmheR{*u7 zG_!@*Be9!jp1ymz#Xwgf_zep+n1CbEs3a1OsKA#(mqh>_#2RD)l}7G-_T|I7Im_;= zSFgR|S|ZzL=%?dxHB~20Uc4Ea%V_Bs6iO5@6ga1rwjZy|_?+{vHasS^!n*$T@4w&8 z`n;+qFtcsKfVQ?W@0{Q>({5bjPTQ<1k%o~5t}BFygDRX^S`acI;mF)B*UpE%^_~43pc4#qTBPekePhsBYkz$F^nB&bx9@+v64y}r<|oAM09Y9J z{C>R}l1^^!LY`G^u{!3~pS;+b_c?t}-p%P0O55h=zy9-f(V>$++uGTJu^J3qa!UG0 zc@Huj95ZQVDXRn2&5jsaW0=ZIa zu}&^Mef{Ry@}y_Z>3*peYV7k*Kkmv~>icESwsyC-w_rkB_8G?ODl+b}e0IG;!X3Ah zlaawb8#97!?QZWG7!bGhH4Ru7md(25NhKy9^<&&ZMpgE(w24&JPb`8l0t-EY3N4FB zW-x~rpMU@U=IP$s&!6_WwDzv9wq^#EK&ruzgzG< zfB(kUO7A2S$*g*?n@YcR{7OhhF=G(mo62BtdN$sE`t)|&<8sV<4Zdef7EWb4V_2-v z%U5^-k%y%P)G%@l6~tfFv{8&@Z9 z1lLuULU}uq3G5Nms+N~O^(f4RHAySux&zF_Y|$6gCM7~+^T8ze(Qpb%z> zu~e5^H`YHcQ0UBdt5PWyE&weLKg{l&b7vqI>M%f#n(mn=OG7LinOIs`fut+6R~nhb z>XSH@wkJ7V3bnAeiP2V9U4?LDBtm0P{_(3}F~zk#<9vx$XSFW8{QAcqUw44kau`M% zt6>zO_W~Pcwkuu$&%V38zBnnUia&q!_`!@Rk6EVxBE@Q*RVIwPtP;)$SE#X=Z6?RG z!{&9l-44&p-0Z@t2gz4JYK(#HPw#yVfQ_J-z#rjA0NC+FM*FB-E*t4=?`Upns-yQ( ztE*`Zu8zVS#)*-7Kf`5yxywC5A>A= zUXIMEBzKMoWNMw+v-R%VAK%}t*zHcMj9HXR*FFAAKO~RDd|X+>+=oB@-&~JWt+UjL1@Z~CTrkLtJA3r_*|S&2JO(9CVKM8C z*2#IJNUK&zrD~(WF+DTwonKv>nOWF*|NZ0B?Tyu^jm1R3y5uJQ`j`Lw;cFxi%1g?i z<-&}J(1=h>>ev9q0XC6IbQ&yEsvDO7`2Ut^a#2~}nTL6JN{>JwQX0&jrJWCd{PBLx zVY0fK(PR7H{_|Pak1P(Y1@-KPrk0+8QK4)E|LD^B2U4qEJ1(;tbSArJPRfyKRdU6I z*)}yhI|X#w^4#pw(?9<6;pxuC##RlAOohq5Sw8#W-~ZkkB;qPdN`Rk$0s}k%AYmGv zUdv)o!8RzoFyInK_W%6PTqA!hKj7EkWE8oXBM>R{_DSE&lW%{0+L+e34ArXbPygp> z8@W>e)UTa1($n4DIXEVkN>%cX$iPUs)vO(rsf7xI#p8u?XVJ+OYLm+g3m@3-tiz|muUaR-+L@p@0eJjvDvA-!Oot} z!BM_KE)lhb9=s*e8kBsYL;@Aa<{InfS}hX_jlt%fpIqGA-CdiXUDt*z(y&O}4nM+}ST5k8&m6oYH_OBb zWg%Bh=#AWN4)|IFMQ(b=2lNYY^xj2Sj;?RQ3Tv5CicEn-Mz>}ENE&9n)ogYyj(qxdL8CjNhS?J(CKqQY+<2r6MqKU|3|eB6P*{ zf*5>LA&@sqDXmw?EyQ=_f!{cjOWDAd9zxK7!NEP{c5OlB}gHAz!sR7w5*8pV# z11z4{=y>&Zc8o!!7WfBU3Qb7MBQP6Udq%hu2JP(gmrwS6gO=Ub|DK4)u{-)k`4f7x z9YtY@<}KZAJ;P)DWoM2YJd05&`AR8|%ja=M$9SV7BBMpGwb)<+Sz29PU!IwoUw}0k zFz_qeqGFgCU?^=K1qR-#Xsw}Q3UV@G2~|;w!c+lS40};3&^gFpK_Ye-_g=XA*yL(z z_`#raAqlDJr8rh&PyYafyM1|oXNoIWdGr1oE;7HE+SU>kD9+S0r6pr%MFx2W`W#OHffd%P2@Y^e3+S+k5} zj&{`65YgpnX+?#31=w=fsw1-mGEyLQg-~bNf4jzSq!Y0CYln`XxEUIkj4UXbK$mp( z^^1jc0>}F7up8X3KYjlE{`I?W zd%W6yo>*`GJ+~k;IU*_|^xoOShmZIlI9DfDjE)WWbg=O`Q8(FYsL^tz64qpsusa5J z4Ys#HoB{#3zOtpxKp`YpHHpG%YHDlmXsD&I2bE@%XY={|QcVV`99Ag6lmLh)ky=gj zJ1fct3aN^a_>X@D1f9F`+wFUIAKtlqG*&q2?I;;pdg9rA_wnPqH*dCP-~QK9*YLPX zf9qbzy(^clT?`61eDKIm|M=y0Z9`2lehgq|*zY$kw5p{7rBbC@!piy>a(w}ym|BP%e&WaUp@c$>F>Fw5t;Jbg&UVn zod^u@I}E0s%OjP=UORn_(nBmtj*JMtHLQ|IR2sE<0*a0Uwxcs^uwC5V1acDAw;SB# zQg99ehT&gNXVurTnN&29LhqVXi=R4EE3iN~A=3n-VUQ=%$cO65glZghV*cUJ$BrF63Y<~EKdKfN zR$#faxx75-djIU{>nBflUVi!V_0xYm^ie@}+TFl^{^P)*pZ=KvbM&K-hxcwL)2Nl1 z;g5nJ-cHa0vV-M-N&`j5<(irX0l_|W)r~DkiKX?Xq+%2-)GLsohD2jG)v=g#R$WmA zqjmbt##2`&s`3YYO{FtiINWj0P%{H4C>%w-5%bRrbD* ze)r+S$4{TYxWATah6Nq!v5t!1WB)kaW$Q?PaQ9*Gomeshmm3-U@WI_1$vT|^_7n(# zXSKTRE-!2mHsJ#(Yinb1wI;2oxD4h7KyZM~8TGX+Hk(?6qGtvF0E!yutfL2S>1XB^R(75~fAQ+Yb3|A3`STa}_2tXI=Luc? z%`zU3KSYh~)i$D%A|5{Y{Z?@;HYYypK}c}$HI!MalS@@9*fN@}HoIqL36@pJ5WWqc z#RYUq0Wdvf2>S|g2Q+XkC}n8ailLtIjaN(Gg|UUD<>+cy&cSR;LmrsGWHFKhTDi?< ze)0o;|LD=5A6X}Tb4y!KpFe-`^y!N?i2CU}%(`Dc{XJRH(br*6h)0@;93C5+6C3s@ zBsi*~GCw{fB>2(8dzUF%jY$tn6@^Bvhb`w6qO$;*1x(=E+nWos#VOhO#h^yOV31Nw zqciH+EE*A8(AzyQ^=5g0Jw3ay4B#D}1bQ6=;*ptkOjN+3^LOZklRqChbm)lRzruiG z^38ATfpyQGzk2=t)0c05{`m(a#DD9H8`^q|N|}h!AZ#qpPYw?a4GYVtEKG?AeH8jA zAR!_wGAtxCCl0SVa~?`0YRZqsnu8ryS8>wr)crL^Rp;2r=X|=ji)u$ zG1zQEX%QN8`N$m{Pot7@Sg44gU;KWGFj&C41yF)*!xr}CThPIM{f3C9{;NKQ+R&|? z7{Lt;*Wrp&Vj{yLqEoX|A|FMBg@*-)+zM0LKqFx^Y7|nKa1BmSZLNU_1$x&e&{9jb zgxHj{OjzomDX__bVuvd#Z|EEo+eXLv!=8^*kJpkiGBe7^jU#>CT&2gWY$`c-^f!W1 zZ?YIo8c}!E)k8nskm{^9$L#VtNQQPFKY#u9#6^B#VUD{z>$7ma^I6Xcx zGCU$GHX$Y=GW^k_(1#CyOV&Bu9-9ev1A1gb>zo3q#TqbDn>$d3S62*?u}LWzIoY`- zKU6y9xv^=Ck#V`+Vi{G4Y;V>VKi8%uW@GF6T50rN0Ic?DZLvf9lP!cok{ zpU+ElMl;B~VCl56x%>FZONcr!?#rJqf-hxN3<S741zNM{`U78pXa_>=CSZG8{4C25D2)~CHDMqu)WrYFOq|+Hq z0Gj4jmcVmRfj8H;=eGv0JOJfqD3t5Fx9`VA+)AX3iGkz=_1nn!(CGTJ>F3Wd#aMbL zP>qdzkBF!JfelE!D=;`CwL7H4lw{%=uI{tm=LYn_TKZiAK~-(QG5FMTBF$pA{(D) zL~L?Qxjjz1Sviz{C`$xtFTL5}0SV0V>e?3cidU~*zS<8<_3SrSwRd(9po)Y%diXH- zZd6okR0MeN(W8)%hhZW!5U?iDt-_mHoL=AT^6DxSIb_kiy*0m8dhGm#Yd3y-l!GNx zn02%cgM3`(a2a)uInlUc$N<~?udd`uJP}=4-_<2hOu#fZJ2&HV!T#RkotfWo>O_>& zSL%kO6AHD#YI9Emm|X{X>HhB4x{UvAtu6!C)5|E!Oo|A7c>m$Ukg$lTNJs|A2B;)i z8tatDWr6h%ET`;l@9e_z+A8!1Fm88ib8#W>VMJI+STVJ!dtj)SU7kr)NQcJy4GYVA z@*Y{IY<_#~#al||*iaUR**rKpuC_V6OUnz>a{!Q>v)eDE_d7v3zkdYh{9u@)~3ws3V0IwPn9P;o68h%2%-3Kc{EP%>4IyA#R75yLT^O{7kkA_}qkYl^mBb1Rlfw;U#PZta+Rip&+urW_k}y0b zJg1j8E&&yd(x4Iy)n%74PiGEwa`XdSg;e0&-{1H&Ei^R`4$`PYe5qm5tq}~tnourQ znU-FD`1<+tl9V2BCX?FKKf)R1^2dj|JA1kqdXm)#1sSsYG?5=0iY4sc{+3kbaxZ|$A1tX{5Ataod*I#`uzCG^PX z+ZbF%B(-0p7V|BOulCtv& z?Xc9dBAYYs>^w4cLC4?N0@croA?0Fdx#y-};Oy!iL`9X+ zw33WsSjv>5O7hCGGcrVNii%BY_MLyIw>CBvffb8|B@K=+oHo?BQ9x&l;raslXC zQ&Usoq7d66qT-@s!HY=B-fh>Kogj&|!paeB^UlMwuEErg#N5ultNi%yEh9Y8xf$)S zQwCwd`fE+4u`}{aFo!P{>Es&6{L}Yu-#%H}WeiJuoxFk2xd9|28YW9%0ct% zr+Qt+F9BDR3i9(x^U{+O!{cF{Rgjfiget25fixLGnMlIAb60-Cfrtp1#~6(HSPS zdfU?OySKYLkDrJe7IdSHH6gjBcxDGj0By`O1yiuqF}-Zmr~PvLY*=zyT4q{&bVx{M zR#qm!urfqNQ;9*vz&bTQJ2O2!IW8RXAU-8IJ}MkCBRnFm+W@7}3X)k^PC?OJSVbBG zv{j@AZ{v@jVR59OSyhOo$Qs_}5I(##y1Q)U#699jXJ(uZh=W&8w!FKa3>`X$Si*_L z(pc=ezG0!#WVLx_W+&|)^Mo?`=b&@U>tk^-0aLpAGp;eQ347T34qQv zS}pb&OY|YKduGat8Me82QloEf^Zn}=YfEDiuh;Ea$7R*lH+J{-apmxnI0668d2CKO z@7{rcpi2+Kp~Bw18JCorn^RZ}dN@SIg~pbL7i6d97UXBAL*&Ir$0cW_CxnMbLGT4f zbM#iY%K-JJ1L_E(uS8ggEttHvcXlSO9|#{-O{mpsIh1#u!Qu8TZa*RX6w=1kIOk{O zY{fKmsiipb7P zNlMGk&CbqEPl}03$V`roiH-;ld3e20q?vSEY*rgQ!t~rCKnBn-ZvL=t*@^jASib_f zZ-Eg623s+IWMH7LLuhlkod#j&xY?u=b*m>9H$B2Z*QBtXZLiBhvHOO3Qjk^~AmWxb zcea*%uIU=kVjMjdbn;Zth3qUSYT5ZkFfxJi9fFR;j7Uk%N=Z&j&&tlpPKk+%g?xba z6?*s9uVrGL#|g0n>jBTy9AH76J|$LYHU(MVp2+KT4n}Rk(h*p$msBp;NNeZCrHfG(7hZsfMEbs z;Z;F#3A<0&FPa;F4ZsWSE~7@mmxv@Pl|Ulqi)3=p9;+s#Kwv=ow$6I<{&5ygbn5%X zGChb!3`PU2sF1rM+tljJ_Oln8bMC1zU_$);kN6)7ugu8I%`Ye@ECb>egG_6%laQ306dxZ02p}T-;l1B)UAo>Qc1(fL8hR%Xa|@t)TY=*Q zP=LUT!wRwdp{$zNpx01LULMeVPPSpDX5{bxEkT(FJB_k<6@Jb zu|^~$CB(-;Uxmi?;Lgokzuq4eJ6#|%vf5o!-dQAB!8rImKdB!=T?{Jf9utoYkB{<% za0@jCld4E81VTz8hLBfl^w#A!pI&ZF_u%T=hqxl4Ol^Ub-+Tk)*0*n;UoUxQ*7r6x z7FS$`(0_q)>TXVKJThfMGL)6Ta<96Y-sFDu$G4b_`1qvQh)1{X#V5qW^gZ2~hg-;*3?=oO0$Yx_fwhWR%C{jgRrU<6}I&Kq!(cRWd2u zTWDZ!zx(yiKR>^c6Tx$%qril%QB~a`S$X%@m#DP3#Dw_R@Q2qPB*w+Y0*t$K?fRv&zaA?RiS3hM8kFEE z-|XTF7`D2#yg27pk5V2TyH?fO-##pA_aLu1tL)MFSp5!C}}n$n`M5%su(?=O5obzkM{Wi_V>SD$05&}m>d`U`=#KRn3%Ae=K{~&3yZvc00&Th5=?_O=$!)N;BH}cZDD50 zDCtArJ$i@I+TA{rv6QAOBvhX7_Yj{~O zN%4tUsgLemJALcn-5WPzOVE|g^-+hIV{)?_1S#OSsi`?QZCjjQoS&I?OpLdc{C+H$ z(A3pG4(ke`R5U)$<$-NN35*9439Rw7p7pKAuRnhI@@t@by-Z3DZtt!I!c1I@49;aix4E6-_{%{@7dDCX2x4g}tR z@E|HK1!2=bln+1&HuLSq?PpJ{^u+X}_}JLQ_^>+{Pllq3QDLXghU8oeJaTP}ud}-B zpjepndXbrKVHVa9(>8-_q(1NJv1oi#M?Y6A1X;U~J3bCojwb@^xIvc^p zgHV}|XVfuUTHE{J`GJ_%>Kslts0^Jp_?rW+d;}*Co_cWaL1=6WRJnXmSAb#=#2wt3 z_1&p9OhR%}QbJs8Wa!PSRj8<-+c;ua0ygH#i9|k6Z*jos8h|+B&hRjY_X+Xld&odh7R)n4}aq)hk6~VO?8=r+4e;X7p?vIy5dWJ~loo@^)(Ftuvv0gouzc!4bcm z__abRwZa?%O$cn8o124NfV*IuMha?x%rhqq@Dg@%UQ2&;T}#h*mI-p9V55_#s%If@KO8Hdwqo1BIQF*7%h zXe!-ijg&XQN)HP9y_C*oH#ami*Y^w#42}*C4Gj#94)=8S4e`Yixl)1XxF;r5V_glf z5N>X5Z0#8yhO#Jy<0A|38%CWPxFM^_UU4Yk(#?C}k?~2X*@ehGUL_hwWQ^OjDlo3> z0racj2Y12=Wp^(B-uUR=&;Xtkc{v7nGldJrQK%$87IO1*KBwK~G$;fkJ&f3(jU+!+hLGPxI=X@CxgxDxODq|L~ML& zMou9#FBoe;snsLb@+g?{;)MM4gsAw~V3^cTmb8{9kz3pFSnQ2^!(ufgJlv&uU}T-~ z&4EnFHwD5vh`ENCb0)#Mp3mdrNyuXJ<=$XHS3s&=_DC ziC6|&cxb_DwN|6=J9aGS*N2hO2?;6LIfaMkV_mcnM$ zfD)75(A?C}+5{;9LJNS!GNFh&)ZW_E(%jzL+11_C-_bh;n=CkaP^#hHQLWbLl;+kW zfhW$~c@&qBn4Xza0IKN{s3p~8I-5yEmlUMm34R2V{-e9s?>+kcUewhxW=+>9DytbU z5Ga7pu-kw$M2zz~p{j!PALc9$?PgHW@zarIHFZsObqo@{6?Sd}GNZn|r2!(ZYiMu` z$p(p3$n9-pvzyww2f91@2Kssi09YYDg~hx|2IxhtvNI0^ojDD<-1L<6902Gr7M37l zOB|VmuPDq)xN!Ym@WZ?JZeBch>-L#PH=^?rN(k}yGAL4^+zH*w=>f~2%z5oUZX*p4 zb7Q0%K|v=1@8w}A4Gp!mRC;S$9T^VyT6%g~8(SLNdqMrnm&zqF0jHBqqt({8cXxL7 z_4W4-KrmN^(XX*oIuwfCL{lF8Io#?8Fm+=PqBl za_Rh;)7LMb4$ewR&&r6san7$;CsDcGkgSjovvY8%?t}wGiv_lH!qKuTL4hYuTu3df zpf@!&uoz9P^`JDY>+I`oZ)Vpvfx?!@6#)(qj<wgy&nM-#n@P}|nq z+u8zO@X!R~7DT>C#2slS9CJ?smhmK$U{UOBO-QQvpA6)^Ge}s z70OEC2o5-$q-&SY1%dkD%x|~v2Zx3v*HncbxqkcFwPCef<(PCjJOD-JpnJ`@fJk&Z zji9FMjy!ohC@}E!>2PR=gu0IAy5{Z<7NMrCtE;oKk-@HS1TY2B#UJfu6L4e}oz~dc z(%RMCF)%zd2CvHF31RoGG3tT9ivB6U|4fj7a9nz3UJlIEaO7K70=I*3Q-pv3VJ%!3>Zfjxyrt9e&0^}kU2|x{^Q5yhMS+agU ze(da(V~5YiWoPH*AsT%k=!)|5^K;VS7A7hr87$6CxOdwB^!bZduAMu1`r@Tq{%LwJ z4(12g+xWn5$d^pGffk1TrB-1t96N!e>+y3TDLEx*8ku6yk?W3!2a7dsK16QloX${c5%mu$3J9YlXnE<~t30e8bSqQMh zdHK27z!k>E$3#EO%Fn@+WhF)3I2Ls7+?ms-e!X_%&IN*bLJXRNA7n7th9v9ctap0K zY0}E_AmoCAz*}eLy4FTEp^Dbf)zjbJL?=Q)9s!H>+x|u zw0*T6veKg< z@{R>vxN`O4#R0Qkq_dbnQ|j~1&MvNQE=(;f&OzkqjYGHLRgVXqfY0UdgzRcOxrWVT z12U>A#WC7o6;say5YRos6$k}Apr0d>>YH2J21YnT91dvq;ExeLMQ_j}oLJ1ij-Pvw zmmPmM2szU{e)j4eC}`0!v9YlU$tj6ZIr!4-%!K&(=*Wb)&~tuA15ceff9i(VU=V?3 z4*7BiA3%~BkKGMG9bVUHVx2kqzpr}oZqwgfhibpmjl&EuYeLN`0>b-29XIp)K{qY713LuWR@*AER2bGR@`!j-60EK$L1 zqk*r^7z;Y+=NEV_EN-CxUq}5rOTNJ9{+P#{DT$dN+ zCN`T)6MUTs+9?zeA3W=%dunEJ-sf{W8_x#>LPi9gLT$|`>P`NgC_Ck*0N>G)!n!1M8&Vj+fF&{5(^A{h+r-NJwO{6uqkShq3n#QiK_69}`h2GH8+uy~;z_*BCiOkx%p5DG8 z7{0jNQ86$CAW+t7;X5L9VLw40`1|=Cg^Sw5fj1vTC8U9EIcce>NpaEf@o}6*kK1BU z$#}zUjVubjq7qe^gH!4?qe>m%Es&BR$?8Ms!^Qap?_~SgqX0-wo;-E-+@*_`F5Hey zE-J1-p02GHzCeq`ZtL!WUd5_|ajUD1N~*-;DnY}DdCNGFse&)bJ9D+%CRw>2AEyfG!&9~-_#6z%g-`g z1DZn*A>nrV^sm33yL92|wd)V#vdgg`W~ytcAz;b%jV&N3Z35|QNAEx<3tyC3QUP1Z zvT6*mh6SZ>e2mKz0M^r+VPuu{hW`voQMg$>eE6^*Y;vvxos*fBou8GGl#q~+1mBS+ z+g@6npLJVJaL6p^VG&D<(y}=c6-R({7%N;Q&cJ;;vie$CS@6y9&m2E}>g?I`=Ptmb zUc7Ss=IyBDLNo}L>CLqm3;P(E_xd`NggN@{9qS|V7Nl$@EJCfiwt@0;*BohG>0 z7-?moOViLW0SrntN|he=Krlbd&HS)!d2x1ue)QCtGryky_18<6E?mBL{qoi8q4DX3 zMOX?zIvkWai2R|x&en#;W(dC4Msx8zo|8WetpLeD?CiAJ5v$ysW%JL7MeKhSdl6KHaBVw8YEp^-lM!S^KD8Z1-9 zsV&O}SRs2`*Q;n=i4zqC#i`O5dCu+obv5@(3rb7ND(;l##RcMH0{Eg(X=0*0FCRtX z{p!a0)mmSM*=~t_K8SniMPw4HtE2K;*-ILQ>S# z-f%BBF_c@>&`?!F^su_ItP_){3t`;!?99~6Q)^`BR2q}PU^1CDXBaG7mcy0nyg*T6 zdR_sp8dTQz>S`X{DJd$yTY9@x9v6bC6;NW4vdm=Ex46R42WxBvKB%pMO%_DPq$8`( z&jATR>`6Ix)P#QC6J6GTz@T6rUnC3{Jl8Mj3=pTAc;EM`y|FSUUckTC*zmBv3(&DH zL@PWu`DqNwPBXL9bBYtz6e^95FtxF3^%R^iDP)s{WpSY%U+8 znZ%6Z^26BxqP4B9RYo#8eIYKRuoA=1S1pxyZe(UEGGl%0t*GZbeAyhJEy1l7z593X z=Z_!Xb<-nnp0(c2is4_0#Ccf(feCaB-rx*Dt9lZ#ifQ3ooyBP~mC9h!Su7@#MW?}U zEC$QRZa#hm8I%65$7KbDxtR)uTyoXk@d`T#RU%m2{NDX-z)N>@Q$szSwb?SE z-#K2+?UK^Q=DL=)XFVSd17Z?rNJ865aDt3NgIG}5giVK?XAApqhw)`ug?VvdA>nb! z+1VM%nK?!I*@{G|z|Y;y)7`@hvjnbCBG0>9UEkdDw52w|{0KQG#ZMf6=k@ULlt!FhU z6(E>4JKIjNq)?~`1ttSq4z@8^42CV8>Eyu?BxDsACWs;Z1`!DvQerunL9$Tx#S1Qg zy}5gM`g1tE=;XWy_mCH43P`8?i%Mcb#Ay$nzv`P?`*!fp_r>w9rYEo3AJ^W@P7e?8 z4~l_;P%{T~?GFoeAy3?$Nc){r!Xe-JP9ptE#Qd52ICbnV5|+oiMo50O-^l z@H8FO=%Q63allmRJ!%_tSX;ohd(-pg-N^XN^u%-x*$US^#Twotej#cP?X;!R9Nex3 z#VK;-;XKsF1fT|KC)8=gwk#TzW$)y6{?f&>XB`}z9qDF_qUFE$e(tRgbfBd#O)Yx( zq;E{Qwg312-@AYQ*#EJA@cpm7o{op|NS>b$C!o`SvHc9-G5sU6%W5UGu$Cb?1v)N- z)fVS~0_^YZMtgI3pw;P!$!|tTZ!D}}pf!;*5yuLZZbPNmpZ5%wWu*%PI3YoTQ1FSN zX%-T6$-<0eNn<$JIXOGn+t5(yl8$>TX1DZ9bMqrzxpAr3p!rpu9~U*>clZ9<`vGM2 z{=xP?hH8|4C5cg7pDP{OFLTr5D6k08p9M^Oq3i@&7XYmUSa}iFewm*d9~&8}jezQ$ zz~B8W-2z6MfeC_Cm_{QrZ0%??=D90@5#heS|BlWxPY?=Zp3v9vv^iP>me`+;EE`)U zlZ@vR7O~3piO(Z5(aU#SiK_2BwrC8vu#8b8v9*-+wo1DsDY$%uba>dA2F% zac5$V27>@-0VEUX44`ff|G+a~kPzD;Ky&!I1j_oSf%e-mUUZXV#^x4e3YiQyvS<{W zb8hI}I$XfSn~S?tB=B~$CXqDi!AR%P7@L9jLZrD=RmuC{=i1gUU z}EHNJr=K_)=j)+Z2Ns!_lNm$PP#FuJ-!tsJQt&*?> z2<0WHb>Rhbz|6#Zuu26iB;LS(L4zMuEn^?RiObrB=SdgMPgv8fElG%DmaWSL7iYUO z_6ScZ#S#l^ZcZ|{z>2~^&8ES@&bDSB@4}JK;7Mq;di{zXp9l{T6mV=om0GV` zBA!)BwP8hX&?;40!`cQEg*P@fH`dm_uC5q#I-N?TS5xh{ z{eIZacktaPbpA9Nt&Z>r;kspLA`t7TTG7Ks_)nu-UpH)QeBJzW=jYzukKLWUpMYTO ze&60)*BcCm^{?ONxn69pFd~-k#|;HqN(^B$;8vj;0_Y_eIthu;>4;CttE_+8mKPmH zgh4EX_Rz+ZKu3lrM5`MA1_)OSHB+)~+-e>8(7rj=8+3o5sS8^STj|g;*aV@j|Hm$v z9av(eYIS{OZDW0Ndw+j-Q@=Qk6lxv}c32Ez#m*K^rVY(#OfcKikzwzJ999TqBLr)4 z#md0zhZv%i5GE2!VpH;K8`_3Hb*A$mSqB(ev;@2{vE)TmSOgSgqhk;uP<%+0-+le& zr@C}(X{NZTudb6Yj@apkyPtsX5s|9YXjaxWOKK=^eqS}LZf>nBr-t734GiPNJUmi} zdjtf8nHdxrV;@I{d#dBkodJ|UB#oCPVPgX#0vq5mLV5~gqqLl|`nHeCm5J900Rkkt zkex&WBt-I}9e6&7JHox->?URAm%r;?RnG!jpP2`G=pq2!SU@6LaibFF1|(Gxllm16 z;#i|w(pmMEwG2T!(($m`_3=S2FMVQ1%+0vTsGBFl33Pg73up!egt?pT0>@^tF zy0oH)Bg60%ap=N0HQ_wS>MkjDTH*t-`4$&u=TV^zq02drlo)cSUzD&|O9)ef=BC#h zR*0_%DeT(KjpgStm}5y3(iK^0IKzN8BlccG8afnpUE`~hFMEfF|40cGqEC*sW?v{A bdIWqGv?y^B6I5)_J)iWheH+)U=$HNn62M+o literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/test/images/minisblack-1c-8b.tiff b/src/SDL2/external/tiff-4.0.3/test/images/minisblack-1c-8b.tiff new file mode 100644 index 0000000000000000000000000000000000000000..ea0f9ac312a6459b25f4deaece5b8bb843422093 GIT binary patch literal 24001 zcmX85g?KySFp5_q^wv z>wUlf<6FO;Ognq7?!B*BtY^u+?sc!^=l^i~haal!C>owhrqXCsGKE@0A(JU&0wI*()*HCOrn#gu!I7m<(z;cc8P0 z(JD1ttUA5HU@)4@W{b_~nJ!OjR86>@>Z-yD433B{Y;LKlEGx!V(>jO81tO`&ppYwM zd?pG@Bo~!3n_AmD`^FVoy;h?X;ak}a>^dfsL1!>oELI(x&0;WXYAARTcj4(X6FxIG zdsxbyeEj0o+Yg^UzJK@j?VDH6_Esj9D*NseOFNE0rn8zl2RXyTLwy}}{hrPJ$1mS~ zc>DI%ks+4V}SaF=|;XI)lMvP)S5mr}Od4bzMg*Ptb4Q zdi3PwoA>YEzIyfY#nbJX39)5r^I1C^ZBsi&0YxK4dc(EC#)XN@N>$U%Ys{q#hl%uI)d2 z`S$(iKmYpr_SNGBrNpuDXt$>rRe`C*R8^4a5!8EZAFvt4E1|G2x+?|#0$Fu%CAw!CH=;VbkO*VNn`{99Mn z*4E)&x7VEX2brxR!MI#!w%P4gi^XOcUi8k+fZG(C;tUy&_&{b6!c-Lw?;y40<00|D(5eZ}hx@Z60&XQX(Ms300r7Q_}qxM&C z_MR^-+vi@tda}R1BUN>jmubY^zvNJU{$X?Z!kBp6tRLRF&6%h8os zEV>F@SB1ypAYpMtJOTVi#FJ=b4AZr05!X<=hq~~6)2eB&dHwCqlXq_&vu{6tdcM6n zFH)+t2CHMzx3BpO!jP zk}5{UTnPlM$!L<+BqheArxSSiq7ryjh_T8FC~74oWyK}%$Y?bDLWB3JtE-`yKu+KZ zU?zbCe^Gh#)HJzD*k9e@mB=?u6RU6Dzh2*X`sUl$H~Z`BI)PGeae8K#R*=u?n$M}E z1^qTYq1I3EhIkUOSZ%Po?4q5u?d_et-R=D+Tg%JZ%9w&dF;A#A7;Sc&({7|*3_5gk zoKseaDl9H7hipNWm6ey4pvp>$%PK3Y(D2L{EC$KiYOoH92?5NbP)KBIE#?qvYPhch zM>0sq94?jO#pBh@tw--Zy?^m|d(9`)TOCk@!D(x2D~k(LCP7I+l2kRJnb0WsLa74E z;FL$Uzp=TwvA((gYE0YT(T>G6^ovZB9>?1H?#qv#KfZkm z?P`75Y<5h}&M&R5udc2v&Uu~6j<6GWrAn!uu-eoDiF^V&w_CWkw!XTuyz}wX*H8P? z4L7Rg0SKb?dp4>EZs_w@4C=El=cfB*gE)&9;NxNaIAb#8HWeSK|x zWp>i3=aii}*Pu|!RVtlHE9T2oM(fn%_}=O|RGPJCZ=XHd5awj|iNq?M(Q3EaW)>VK zReNk?jbWswq^PV2-V#y)1#W}CwFzWncz9E66&4E-hO0o8K+A-pLW1zaVXNS+abyC8 zSxc&IX_c8>ld~(EJI~*J{`~gw-p=l$-Ss)=q-SPvZDW0XebHmn@aexDyxJvK$W`iz z35|p+)|wqNUf%xN#wye}s3wbQTtFQFU*wWSJArjdzQa4C|yILKPC4E`MKuELWT!ySd-3Y! zqitvhyZf6<(?0JEgdA8mYtsnp9|jz_J*-eEWD1Q&BOaGR5A#irtj{hiF3c}1F3u?^ zv85aySFX2Ot%j*j|MP#Qhe}QcF(v$_Y9!W*3yLAuN{TD7mDNJ+{?>3grV?J7K!MT* zX;D#ut**vm;c35{2UQU9Up1+9Y?!MsyS&Tmn>*WkyE{9ZTf6&@ch;t7pzlr# zq==M476t{zl@!B!78jIYFz61&+_NbXG>nS!l5zqG55*X2N+tA)YRC%`5r>2Fhr?m3 zafIqBJd2|@IDAWMYpbiP8{0cOySw|3_SUDTmlqeoaVxX(j;cF;2mF4z!;?=alw!5U zU{J`QNV`4Q_RjvHQO%@RPD#F1!5!ht4Q7LJ_St{_nQ6+sbm(gDFsYn?2G5m3r7JEf zDnj9K&0Nc~mG0sS6dF@rhAP1jz->?hE3r`R06l&06vV1(9N32dmMUzU)deMOb!iDY z{U(^Vx3|Bs;Dc@s$-3lhOuOQD;LzcpE)6RuluEHuqc^IRdYf}#yot{)HhF{d^sGlxdSRzOF9WGKojEGR7QY#yIqG@(%d zOK{a#z`@nXqauw002Bs>3P2{vZz35w8FX7bIFMMyoSgQ~EiBH@uWW3rAfvjY`dF}W={(grK|M+lNC{u_f zBg1mNPUo0eT4++pAOKAcr_&{^@8|PXYyaMpHOHJkdi3ChHeyL3iq=F$p~@jwO9~4L z^72ugwbJQ%Arw4#OaOD$IOzM8=qj)a>HpQ$ILHSwcn*FOAsGG zfZyO*cel1ySD)-{t?I7*aKPW+FYsbme(exfAQg#++QxJf8prI)B2z5V=yVo`$L&gw&~jI~w=pSXM{ zw|Q71mB`>D<#zT>sI(5>$}*KJR6^Oaxa}5AH^=<-pQZNv+d%>Ten0&ot;3;FXlyB} z3A`jtLxj3_m-T>p}aIkW7pt>%Q#q-PU{^OC{!Aq7ErK=BiCr`-sL4aSD;WM zL1)pc`*@yhQ&aZ!fTR9?2Y*3v>cDd)B>>bR8%jz`@(c1a*<6uhZKe)`0niDagUSYe z!Q;@C;5u+3Kw)@Q2s&B~l}4q2S%}vFr8L!&$+Zmrl-)DEu)4GBRgQKxGjP<}P7YtL z(7J8HmR^xsuh9aCG+T8tkwR;8&n?soxiXd7Y_}NH1K1%ozb@_4aeqJm1Adi_&2)4L zl->Niq7s0XWu=7$`31uxy0vWw0S_pt5`Ypi+<HM2G=?C4}O=(UYa-6K+^R&O+#9VUSYW(Skg?X)}0h6#z(d$Vv9jMHf*lzn%O_@6j^%-`?GQNM$P^>Gv) zU0PIBSX5k)4~+|{zeR<^*#W~LlwJrpND3PA zu>YIAWLgc2f~%&grA=ii2{AeJo;GG}w{Svhu)q*F<#M=eYQ1&R3m9a|=>YrmYQ2TQ zM`>nqJwlxi5l z0BB-ilBTuw3H9};Y7BT0%!3#MtO=<=g21EKK+2Lx3^0>gQ$vE%QeSrC_v;aJr=tL?3TZyg)Pz3Ktt7W%ol$Z)I6?#2V*zna= zq*@3*3WZ6hLhdr^>uC&N*^q8gg$WA$JvOtjsua!Y9^uP08Y2v0lOFH18>Z})ttYRZ zKU(&}oa?cf4U{p_xbvB^u{!wpnX_k3oj&{P`EwU~W?ec~F1#kV4x%oUr%7_0rR)kGL4{93V-kZD0%h z`w6641sR1**vNzk!wnDskOa+EbuWwDAsn4BdxmPrRB;<1Jre%x@hgd?*+sb8R`48@ zF^Ahd>783z@OoC)7U$i**@gYrAKq_x?6&d6$?45y-^{GnrXDBXJ$>%##XFKYmrg!b zR1B@Y7}B8tUbL{Ngvb*N>9liCUp?~>2ry3r7g3484g{qWt4GGlVAO%K_uVwe2{MJ! z<$Ltl)i`W%tS(N8=tQQISA)ahY7_m=-F%o(T*+=7;7V061G=E3EicV`-OJmHUaQSy z-}&U^TMTp+g5R)Eg9$hijY=ZnhzfiubXf$@L99U*P-*1Or=Q=yowMw|eEG^Nt|hX4 zhJHF8S5tN3EIM@Zr&~K)Fjj+sOHN52Der!!!(-Mf zg|e~KoDwK+1vy2ef><&>rn5d(pjJ(;JzAM|PtYsM$^e!Fej}174Xtf8c)A$jQ^8sy z1u8JOua?%a{_)$F&re@{{p;HYEsY`eNXMEO1R^`n|LnD}G(zVHM<7>fE!N4UC$C;V zU7qyJIo&VRLXCa?$%kEeOMSoW>DKP{_7+TN%Ra++T}8$nmd~zNNVwy6axya5XJbaN zt=;WC0|Vl=zNP`|!m?SnJgLOwqrQ(@$f(L5mNt>9`iVs_Mqr^wP@!cJ$qeT3;UL>%)^xJkLKM0h8B_@rM!T?&RzAYCKMMGXl4x)U395dG{Vu^I=g+7wvBo3wAH&#&qDwv zAaPn#msH$HsA2(G0SFIi{ZQ;Ej2_9t&fCu~Y^Eo#A1mq_nn`#HjS2r9y)n}NYIJ5k zdzcGM7qE2G+aJDu`LN@5SiMs^?(*~Aa(oj<3}8w53g)yuFm7c^(^Zjp_1HD-v{@(V zZxDW6~x*esZwb)%U|s7@9yqyt}od8(6QHo4u&`;%?8Pk5GaIMVl36=){XU# z3luuD-Ktbdg$qE-!w<7N=iC{{g*pt7qo#Z2@zM|rM<$k5Rv_sL?UhC*vHB#ArR_;h zmqIPOt}qkQ!rP`{O%b17IU4Ch$i%5&(8Qk|$766}5vS6l=5w*ZP~U-~Rfr<8hiTDhjHysJzEu70A^loAMGpVM*EZ%C=2v!hcQ&?Gm!Gth;7CXf9^e1^?@w9=AeGWG zD8yhGjH^USO3U{oj@!9Too{=U?z*N)4q2A#?7nUiv4T9sTeVYW@p&Q1ZH zwmdhx^yJU~ynnK@v9VQyB2!_qZm);=jiRpg9_Umu2DfqTQ0rUrpoir>Gx5JMxCYB30=rac|$;~n`LRrXF6M7@J zn*+YqK#`lC@d5n;9KClDmZR&Nu)9VXlDJ5#x90WY466tJF$)QmF_`92gc^tq5H)JvqO=y|uYI z19S|s5L#VX-R>#?+wl0B7TLn1SFe0+G*U%=9t0h%$DmUXU}`}2$~8clzyOOUHacFu znH^&gsRjN)mqHWL@(9d^)}9gWgh4y|?8W1K-=Jmp)xRg=aqN!1QT~M9Y)4U8qIpYq zThH)Vf7zKM2hUnSXp>yW?(@&5B&BDn6|dEygiYJL98P&+xk2DxT77lHAHlI zT3S(IUIDfow(7_%fs7PLT_Mz2_TQ}W8|efr{@S7ACw>o&OGXxyOrT3T`})N~I)P(- z`r*^N$thbu2H!p+1pYT0N;;*HQGvx~T>y5`?>bQ?>>c5b40QF3^f&Y?1b}KLlxmB8 z$_pvKumTL*;`-(~(37h>+MG&={AxVCzP+t;pu4RRNr}=jX3wBaj4FjbhET!?K!HYE zGrs-m^~?wxxZ={FgU3%@z7rN16%m`BkQ9|pY>bc2W!MewS06updiUz>*F9csKToVT z|B+jenH&)n5qkIR;loG#51gwLD@MnLdpg+ooT%T~YN*k2r4rU;ldwAmb`7?-K%4>r zxW2Nb&Ojj~ST%{lYHDh0?`Wu{um_c9lV|hU{8CK@svK4*z?1-pCy`oB^E)fb1`4T) zkod#T0YT@k{C4Z^od>rsAB`1GdOJ!+mL7X{-+uV;_Vw$n**E{S)HOV=(%-xra`(!m zYZrq84j(-7;}5^ws%@w##*YE)4Ey88g;upxpj4{VO10Su!{rRDZnq!rz+QG8_6M7i z6xe8$!%Hj|1bQs`ZiPxdyRqKdJ&@01wOh^!`|cf;OaPli{;bk5>`Id=S5z{!&*jvYF0 zhWPcYZ0M&K+^^oe`tvZ{*Ue zP^n>|VYfqNYKa&&7ZYl&+2*iAPAqIZ+6B}MyXEzz_1?HbWa)~o2II&ztXg(0gGqp5 zLK)wBvG}nwwE_!-6EaOO8U}eHjeMw{OsK|DC*~jgbnMvCqre#j{7|*Huma1S&E@4u z*Sn`rUOj%Y^WyX8FCYKop^pl()9wWR>xTn}e*9Mk%+U`+9^Ac^Orut2hCd8`a4SIz z$PShRDh(7JmuqSo1O)rgRX4UEC6?Bkl8RBVP_ICS8WN4&RL5e{S#?DfjMnMb8&6!B zsLJp3HI>e6;c&+}L(L4Jpl}rRM$Esyo8}jAB#<`;tBLLX=P#dZtUr17>h1gYA3lBr z?sfe&uVqsU0&EC zY{Can*4D=2YE4>EaT&}FfZza|GwN$uY&NqNhwAFmJbAYL4xd$yaAZ({X{^?k<~nGy zMBvzCL{AHT0E!yutfL2S>SyK_R(75|d;aqIGelSO>CS|g2Q+XkC}n8ailLtIjh9Q`gt3LC<>+cy&cSR;LmrsGWHFKhTDi?3TjyO$|ijY$tn6@^Bvhb`w6qO$;*1x(=E+nWos#VOhO#h^yOV31NwqciH+EE*A8 z(AzyQ^?G@KJw3ay4B#D}1bQ6=;*ptkOjN+3^S9}QlRq6fbm)lR&tX6@`Q|tFz`Cc; zUcP$w@$=We{`wOV;=lF94Q)L}rA)+V5H^gJQ433L zsT5=s$V>tJ8N4YBL-4GiaBycPX5|$io&&H>q#zxVO}kH~zmno}OUhuk z2y0nrx7EOL(yGq==zj;GR$9=(e;qjN_fw?Z4vXT|Z5RPTpz-S6hfiO=ef{?J^T+=d zCK4Naj0$xxeXN&Mnh^u(5E@lbkPs0T85R;6a`z6;sDk5gjg4){ z)J*`wOV0Gfbm&0EFz4fefS^#Q)M_k*U0b`TQ?&Tb`AHO+Q&3cb#?zYW7;HA7v4d~#$d__c4|5YDDZRplcjNk@_>u|*> zF_B>r(W%)fkq;xn!oz|?ZiXpspph^dH3}(AxCSSvw$?y|0=;V!XsIPzLTpM}CMY*QRNOe}5V|IBRBtyH8p1peW;nU|YU%k+kIe+T0X?#zbxwiQVhtFn%^fJit1E`c*rb$A1>u6uxXX({P(VJWP>LB87Tnj7GbXr4Zr z{9?-~#FE=PtME*o5p1&0%(ta9$#f>8-EK8%1)U{9$A_SZnw*m`a6*;Z*?;mHDJGvk z{9_F~buolh-_q8}E=`OGx%)6IEHok}2612ngx`aU6ryQ08Mi%OW--E zz?HiHeGiiU1Ej zd>9h)AWUQi0@eh&Rd`d2)9agEUR{MEhb)@6x8}D>kDb48?Z$5pbFgFzvyRqbkdMn8 zE~CydCmL4_8DN|L#g$x%C!#CsySfC537F<)=Vp8^*x!4+GxHlxorrS!O5KojLZLQT zZSH9Rv+E!)-QV3>m+`-@)n(v%dKqPzNfDtB?mc)A5*85^3CRH20F@+5W1aH2EU^B8 z<&@p+on2U7TZR4r#_euxE-vIfhzJV_E2cJe4-ECP%QJ}z>CjleVPSbs-XrUj&2O(g ze?!R}8_L2kn+He7)i#HBX?bCK4givKcKgNKJ)5d4_-JlJ2TuwOQfo5X?QWlMadBbB z;aGnpEYHg#4>aQoGLmD$!$QDgVGki4;8jC{Lmu2f!%t|pn_>TB0!-re`anRlwhf(i z6JdVlEs3#7VX4gCQBeB|^|D?nwtAxFkK|#iZ%f$9@8dWgZ$AD@R_&an7S#_7gM!rN z1@+3b!)S3hrWT&RfB$aR$Sd#CB-{j(&ivkP4jp`x_spg{J1gK^k?4FEvcMHG&~n6UxOZ)6$FgUp{?W zlF|dtWKx^@M>wNg{`gRLXHOS{+@>{a>q^RtOL8jM#PY(l7{~)K3hG=`WF-6(_%H0Y zI=$WFvRlD6i^B;~g2BoxEw=<00k=x%1x z8MN{|%HU9Q4YCI;%`PLO^3oGxq9Y@tBO{`tqv9f?;uGWGpF?goYuqlU9hQ1lWOL@7 zokylF==d93p!!)cq+ASb921CT9=8?5c2<*hR$p)>?ZyfJ8-t@VgIsFzy#UehhA5M3 zGVUu=l}k;qvzi}crmSlLWi{-g#a>@!dwiUR+3Q+OPNws zNnTlYMn+0XVoXGMSY$**cuZtebQBo+FyvN?&IYSlXka#na}va#pmtmNZX8IG_GbI8 zokR_dN#szpoF0e6JvG0%S(HSAZ%{E&yF?YHCVc6k=OM zR9ti{co9k2JMCJt6C|-#SUG}i-g$V|HJJL5nA_QRl^_43WrPPhH=`YP${;LQf2FB3 zc1E5F=J2H=om}IXfAa3lo5yRrjA3c7lQ$5WoL7i$9T5W0;BdJ>IcR?MM6b*ECE#jO zL4ICoUV3t3cs#7L3bJyGP-PV$kVYjG<>zK)rl+PPAaNEE7oP;agMWnf3gjm^4xZKG z04?zh6cQ-EU>gE8AMx+_6>+#?xdu8fNd9LRXYAv>yX%_7)0aCWI>V$^Z(G`Z`(}6N z(PMGLf^M|2CM35M&+Om`ppAK^U<$T6rk9QSv|o;&4NFc-%S?-p4hhN3%E|;7R)(l( zDlw=SSf}P^XQrno$Av>4#HS?3M}De1rY5GR zr$$FaMny%3M-LlJcDn=8!R~?XumBJpjDrt=o1OXS12?-QNXkIgCP-8~Qxbm>7j zRMnydar>(VhRI0YxL459;@p;`YL;Hn8M+44WyA>RA{YqFuVrF&$$X7rN zS5j71QB@I^lbMi|2gc=OXC=hNCFf?uMny+QM1=m4%GJ4?NIKY|0wa!tDhJ#qxNduM zr6b@(g-~xqR25L!;dOOplhJL*C6`j08z`d9S@+7brwbPQ_C%Z3zSPC+K5#UJ2I|sI znNkDf0q9&;mS*AYDM5$*1A`d5*BO;bE*!y9sBC<16lG3tsv$J#4 zlVYM0GLxfYq9ejX9$YUJX(rtko7D!7Fg>>jkO4G|o8PTlc4B@G>sKK6Eii(>U@PX2 z3=H&j2yHI6(;(~|H=A^#ZuP|CrbjsFniSTv?R8lwcHb~h3esu=MBLKm&eoF8HC+Q* zjHAbbPM!+7kevlZEjzymMkY|cL(q|!5hZ#|11t#q2mo|I!Yf{JVbR)kc z;6h0UoYZvkv__@bV>Ov9>Io3G7%Y=Bt3anL&$@iAhy48g0|Jg6Kb}^Ymy?|j5;#Z( z&`LuwVRl5N#wH~sCZ(jNWoAGXiAhL^j1CV8{^RC(g2X%x-OFJE7zRKUUKJFVu=|Al zqPg+c0KCxdGHN7ziAbVS2_#~^NG1pEv1&pJ1O~Kk>#R5LhqG{^Q{OL^=|MDNFdAS* zh1?Cv5>F68+3KiNLv>KSSAWUH3nppy={yHqq<>wB-?C*Er zN<|JBSC9|sPzvf}U|^~`JWB~F5Myx=Y$+*8Nl8($(a>K*@87+7{bGyQ3Hx;T*kP|U z_uaU4n7me(XAQlPM;>%YtY*m=Fv)VcSUAoZ9UT?$c`BtG#QG-Kuz(#NyRw|w+1bMx zkxUq^HnYoagI?nGOnRKtYdd>S*XLJUn%{l_<nJ{L;H3+bd)zw&1lk4fz zxYX$A*u>bFgrwx8`1lw=01@F2?*4J}()Av(V+w@U&^v*cTL9JD3LGbZ0(9Okq5t8Z z+9TAe1UxqO%eblGAbv3kxAlK@E+?)d(Mb{v44W7n=l)H6kG?AwCZJ zDm1S9w|~F+>%CF2(*-gktKBu_okfxrjDz3vllmdl#h{|@G4aUo_$W^Zw@_m+sfxrx zAfzN>2zj+eZ(V-<@x|7353as_h$|Ax)D}qj&DTI~ef|3B)slB+eQ#r9am8f_{TY-~ zcXDFmktq|Bp{xX!d)3wSCilxfzs6+5$0x-`JiK`~J|P|^uh0ALH=_LXljll1bs-LIZpI-7kOr z_35RY2%Z}q9fr*d%+9ON|N76r|Armhh8KcveQ|cqZjAUP;K=#p#3;zbwCp0}h79P7 zs_G8O%G3F)lV1VBDo^*Dsy@^;nTeY@YQ z#W}Znl=AS{wW`+s{^4=HfH%(P@;F?fKm-U9DaaEl5P_N}_rCn~_qYE{SGRNz4#TcN zu7?3;?(yfp{`~ss&Eq-XN7h$nyk3(j^g!Uzu*AsN_=Kd4++tW0fQlB4C2;1qzy19x z4tdtZEX7xp5=51YOx&A9aX1CO5l5kOGdInwo>tw#E6y`I%|Q#CTiDAIE|TOJl}>ci*HU$>Z)md57xz9F6v_{XWmjXkI!UY7?HU%ok? z*J(A}I&|!IM0jj`3IdhDI9UHwRg)M35KO#O$EU}|$0cQ?gx|k$F5qrD0i6(Aj7>gu zQ*EPzeVIF~CBBZW@DmrWQf zKHz&+H}{^s-Wnj)Hn3aUdIq^N(EQpRzJ)os@|_IYVorVKK;XUm_oL!c5H<}& z`2dt)Gv999e)`x-PfSmWkBv=?54(NwWGJc_6?Xb;NY1suBiF|GI;+bLiiJt97n$i6 zW?>C6Z8OM5>hrE1i^ex~^mD~RkhKfBhW>uF3KbP}3r7q~z{XrTk;v!iEe<$c126|fHEhqlQ@)ugi$>UATXZ!rvYOr0 zF(lwa-x3OWBjpXS z(u0EjD5bO6%?%CB^*w_FgQJ5(Ljyyj!#$mSLwvDBu2dj8?uiN2SXToqgqvF%TYH9w zp)5+__{akMhEb;mZpdn~R~!ns^!wfL$oQnx>_X%ouM&+TGREy%6&P1`ANp1B{oCP$ zvfG#cXnc5gXaG-&yc`3(nZgC*C{&W~3%U6@pVRJg8We(&9!6}?@k_b1hWf^aS{kdd zwY#&Uy#t7ZHuzgl-!NYyRzRnair^QwyOGKGZd`BQ;PB{}0MH-w4}(z++f;)^V@mT6 zymU7>A~rcC9T^DAL6(Xq)QlR8)*f6%NlaEkbXe%^tmHqg1foXLGHYAA>obEd1a*pK zPLC5lQ{Ro7^?`cV?J&qC+@ZRdlR@W_t6^Egq7Z0QW^-$OV|_Es2aWBW-MyeK600U) zCKDma+uhR0YU^lg?&u#FfQw|Y4AwzvyG9Sm62FVbQU1sW97=!37ek5>KUc$+&g+^5WviWCV=F zJdBGwdm|@1{b6xyC$SrM`N6nY<#O1Nkrf7|x!Kuipd^5DQcC$l4Iw8_1l=vAHZ(L) zDX=|a(c$EVR@+eD+}PUI(aRAa#gE4YVr;m(y`{aSv$LhWv!}m*XbdonL@Wa>JhWi7 zTC36b9Xl5E>x0PXgoKproI*qaUr}CNO={|IBEb!C?!E9RpdTLIy&3ZRiRg%=5<*LJ z6PFbB045P2N~|^)_zm{w&;}gkV_mcnM$fD)75(A?C} z+5{;9LJNS!GNFh&)ZW_E(%jzL+11_C-_bh;n=CkaP^#hHQLWbLl;+kWfhW$~ei)aK zn4Xza0IKN{s3p~8I-5yEmlUMm4t@xe{=+-h?>_wFZq(H>W=+>9DytbU5Ga7pu-kw$ zM2zz~p{j!PALc9$?f0OdKG(?E9~3|WJY~^O9Mn+*U;b?k_{56klWkH zW;eBU4|I3*4fOR40I))Q3X6G_4A6^OWoI4;I&&Iyx#=nCIRMaMEG$99mN+sAUs0Hq zaN+vh;0Jf^{(kY?&0A+4-iXdiC?Uk(&7eqyawl{zrw1&9GUv5_zl}6N%#D$51O=T4 zyqkxiG&I!KQt7R2b!0f)Yw77}ZER_5?*;WQUn-Z#1e{JbjaFOV-rd>R*Vo@W0L@q= z5(v0rr9z@WYM}#jAn@Grs}ZrODajdmU>kBx0}_1LxZo>`vJ+1Pp1XYI%BAyXPG7%# zIyfsOJu4&j#yP)YokZn!L$X3X%+A53x)Tl%Ef(0)2}jGW1O=WraUr#^g5K2Bz+yDD z)`QZpuCuSVy_sFx1PWUoR|GgfIM&Xj(%E%wJzc%SLj%2oBb;##AOw)~0VdUeIL)5* zlRp>`9uKo=DiU*W(TFOC28*q#LV@Q_oIM`k?|Ko<^4vxYxJh0~q4Xhyzmc*a@kDm6w93PhgYoM%LFs~H8R-vpEj^Kd9 zNxF9VTo9-a&ir=kUT|nga!pm}k?XgvT^m-*RgOug!vj!c4!YNj3y4Iw(+Fz1?#PqJ zg8~CjpALt1NT};*u50e@U=eECy1F_$8yW2SMgUU~UHs8rHUURw(P@p1Ev;SM9RtHd zWALgxo)C858lxTvtmq#D{LcjW2gjvn=HF~+uv<&!3k$XJ2NP^QrxO2!!j*SkFPfAM&xf~F1;nL;buKjj4;6ero zbw5t6l1$ivuLh(E*$T}IPCF*2CoNi)lJWcTz@VU$CyrlF$jC3jv1(}qW^*&SngLC= zyQiyxLa*!W9N~`f$GaJzqo+_A&23E#z;r!*Lx5bQA_1sDG-?BYDofT+$B&)8a_sQg zxa{n_JVc`p1YJ>netu3m+`>eKB!k7d33pHXpFV%_%C&PRPhY%r(?3lQ#=-mmdmA74 z4f&D@H_*b+ztk%1g<~g>bUl79BqgT=O=HtY%-YrlES}ZT+t=6I%wn;dJ0QN~f}wg6 zsEBEGZ5=IaqyIST=HI4?gp8@R&Q z_?YMiS@}7bvaF=28^?mqojY^-)UVfW+`d3CPl!Qt@SO|>+mK|Pob^smIZaww9)w&_ z5IFD5t%Tf4G^2$MFab|>|X+dF5bU$F32zNeg@oe}8hGl=`BOK<27?GRbI6xF_yCg3 zchQWo6YI>;|9#byC(qqW$;6VGAcwDO?yN(XVrY$ROeqFS%h-~Txv@J4DyVdiOn(7+r&ed%6AM083V*aIVB zQZlB6NyMYe^5aAA-TVEb|Idex9zWq13O|J?WG_y?SOSXeNWc;M)ffM0I}$0WogCMBjNBqYWsrp6ai;Zz$A35&AR z6Jh%h5*is3{dd528$H zs0}o9Ng1Be*wN8i%OnxtT?cwv8C9sN8alHHzJ6$Mn8Srh60St0Vu=c78x4GQ##qon zKfl0hVQ~ZfKOgl!4RX1dc=#R?FfSnq;w~E7RbS79Z&9d*Yximra$R1Oo7ikJP4IOl zXs1v>eDJK3?x~r@d7sbiY&;(j2pJJ{3b_%xnUoIK>Evo+eQP}dRasU=uI~clK;_!l z*$X*}D?wG_YU&zVI|l{_$9P2VkL4HQ+pv5E-7+^|**~%G?CWaLarcCY8tz`+8Y=(6naBTZ+{mX1K%QoB{FO4dV2eYVEE#4N5#Mp zfIwNRh3|;ah5ZP5;P2;m6fSBH2mbyrDj^MQ%SlU3O^S<-kB{RldfXO+O2!**Yh+RI z6_u#U9Gp_G8CB{4Z-JBqNmd_1A1=->cqiM>9tA*h^5m(r=Pq5mbm3NPa#3*w@^o#r z@C8~dc3XE3^eR>zj9Xo8R8l1#R|y&>R#R(7PtOpC&*$ zNBxcf+wT|nTUaEttGvwgjMP-%3PH2NUGqVOFl&{f;ocS&30q!ToWW9PgdBqbWc7%i z0cowi8BlF3F8bW4L&u<0pE!Ny%=ycgE}s7_G7*>|6oy*g#K2XO82~K%nrhj#^{u_V zJ0Xr+4j=n{H)t* zfNQG* zm~`+L*xwxd`Ny9Sf%1_f=R?91Qc_b>(-OhDq~y%(G}+EFeBXr6=`_K`#z-pzU7Ci5 z31CpFQL6N?2ZH%wZsxmf%ZsxM^rNTFocZzA)y4~^_i_5X?|B~@&olGP z%++<@*L`2h_xje<)I+$IyASUFa<`+(*VZ>2O|yZnlwCV^o0*wfx_F)9q7WAp2oZUq zFpUn?)D(0#{Nm}O`?ngZ3$w%_%GTS>*Y7|41vwXV0*#H04ihjaB+|!To!&>WLzgM+ zl*6_MR>+a#b`r@eajLSoEK{1G$gjN8SbwFWxT2!!(uIn`q+onakT5b_nwqL8EJBcY zrLLvv_BPP6$(t(4Qf8$qbJCN-ocHb6xyPL5hWu;5nV?`)lR_iIqa!=DXyn6uf>YGp z(R{feHJo4C++15vArKlOdb~yi7ona>%I27fa5`DqZn5#Bq-iY z4Eb76=`;o%wqVcUz;AYNX0u&<19_r&aKkBN(XmOn6;-vD5c;1lsko2_h-#ou0GBUB zX(lzhta`gP0Bdb;zbzx19&k^}E~!EB^I==fg|j(1%A7=hM_bwv@6%i!(3a?}jeP#+ z=C`k3KkFxk9^buPnVTRy5sUTm5(p-cF?ftM1gYvV*ea@p(~Z^#C^Qcnx+lYR*2fjiAc-$-lc&E}T& zj+;uViBk+;l5+0GL(rH!>%LJ{TvCvuR4ODV9i2~bLl7mRi(A;YwGMdchJJjYx2qvf z77=hnkY8C|(Q>n~t^IEAt8IfA0~(Uxb`tHSAkZKN6f$AbVdillANDYzEVraEDJm>F zDLpSQJ3S}Av?x!RDisBI9ry9__C+m$A0bf`UaV`n*>u3joH1I#!#S#%1W2%>O^Cw#j80mt&f+h;v(6>>@7QL1l3cB;JgdQHR4j^05; z)C3C{>SIJk?z)84?Au&oXe9( z2c6~#!$lE-2TK}_>ix{bn`d2>iF|J-TXR=lRFpuGceV@=)joK_uK}@|nwlIN6`Rqi zm~jjS6H73Q!DO(Q7+NOH!Oh1%HoK@OD+U{*7`#o1$!KsXNRH!r9%j3^0`2DE=IQV0 z9T*~v4v8sh9eD9zWTrz_njW76?!%tp<+ZJ??^|CsHa;z>Kd!wRu2smyT$Je|Lc5HB zPE7+((^-csS`8crRFz&Lwn2uq4c&H+dmld^8kw9Jov5eSV!Nl>L3_jxtae*Y4vp?~ z{A5UyvOp0nKx|9^YT$N)okq-I(`jtSL&uLE^EiCi$;ri;VaY6A_`nvV~^KYBIo!1nxf&hPBP?r&9`$@oKo()YcXjI_BS^(t~ z+HpawHa86v;Ip0{q&ElqZyzF=?>2>dV{Hoo?FgTVSXO8Zdm7d8s86UYR~`|>3kwm2 zqn{X@W?>=6tS!klbf%NTAr~h{dpaUr@*Y3s)JMbo^vqCqK~g3rXi;s~>pAV`FPpz@ zeg(36>-+j2#yW(4<*9Le{}Y|M_tO(22(Sp!pIKCV!R&;#E&y5yu<{(FeLpik@@8nD zAqK2-qCl_13~LB!iB1r>!gM-?$#J05Sw~I;$3&n0`DbLF1)^{u^CC_=AFx7dzy|Zv znQhNuu_(CSYn`ZC8GSc&QIKAcC6CQ0EW6s+**~sAvjLEZ8{fZw|Lf1y`b+1px8!BY z;(XdwGuSgxM}t5Bv;dL`bOum2+kbEk7$nGc2+$lJ=h3qMw!fn?!Ixpa%goA}LZwik zMmC*lf8;oFw@&V;c=NHBMvDBL?Z{-Zl_eSa#S~@I57<$xEU>!yxzhdQ0_uKm-;h9Q z$>rMSj?S0EBPf~9PK?eNSJ%I+PuF4oD)KVZ<8HnielZG+4O(z<0N(|H=C*&g(OwG> zi@+~IsVD|xK>^ZOt<}!HtcyQtv)9zz3OH`fx;W$7} zt0H6pLU|r+T{s{PIy3Pcq*4P5i6`)1(Bek*0_FjfxS*T8m*!!$*N$OlLxvr*Ij-)m zE)EABVV*Rq4F=ZAifm<#5ru&8drf!kcMFutK|_U#2$5w)Tc_h}-9iT2m3qGm&vR-LF~D=(Ku+!JyY`pcd6UAqJKcNCF{2LV#WcEz}ATwFcwTvQe+o>GV2{ zMyJ6`I^B3%3=_@(c3X!-D8~Rxz~u&uB4eWjXMB&lIMD5Ek$2u}ZnkIVF0v~RU{OSD z(pX8n1iL#BU$~BufXOZ~1wy7I%g|kMuJy%>uJ)V$ekDWi&?lkO84QaCd?PeOw18s@ zsx=1vJaMg7X^e{oqfVvP8JAbVD7?D5wz|CXVQJB**Xz}4?V|pYle?F{{~2Bg4{jp9 zEG{tv-7N%b8RE@YahN{=;6CQdmq@V^f^RBOD#cw$$i>B+6h;VogGD=Ws;)emdGZhYI^{Q6~M z^BW)-Up}v|tr(0(8^>Jo8`of2e z0J0H;wb){1=<5d=qLd&e5=#;@iW-{R2j6zd1)!`03@u)QzA>@neq2-x7-ZuUU?E_9 z$W&Z>^!S^m;?4YIS?iO=Et zAXd!nC56~W(10*Gi6G<6>*2xPx}+lq0VRl(Cd<+=u>lc*3{V+CJ%zGSR(@4e`)k$W z=%bV%5gc96P9gykCb{1MJRis%pKkr%6OaWV;Q;7D^IRLsbfP}STMUvk^`iw@6KCATF&>%ELEV>X*Lnsfly7MZ%j`%`MzPZ_{8ANCU$a0RrB?jH;dle+s z5yX^eb2Au>i^L;L3bS@?b>UtD>R8egxiU8kYZ%aG#N12CLWZKTdt_EbJu`>~`rRJL0{^K6Xk8^Ll*Y3afl$$XBanF(M zbKvaGXUK5_SyyPwSRCY#{Di;% z`uiVqT~L}?oSP>vi_BE!$qP819$uXDg{2C_Q)P;5PK>7yC%3%3*zee}%F0TQ|G(Lz Js8o53^dHkAhY$b& literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/test/images/minisblack-2c-8b-alpha.tiff b/src/SDL2/external/tiff-4.0.3/test/images/minisblack-2c-8b-alpha.tiff new file mode 100644 index 0000000000000000000000000000000000000000..5fe8f5835b119e7e41e1ac85867fba20169317bd GIT binary patch literal 4068 zcmb`Kd2Afj9mi*9ZO7P&?Krk$Cr-R}NMj)6at@M^1Cnqh2sepBYzNzG?|OH3XLe?G z_TJe!-<#RB9VacPTJZ-$LRI;Ls-mh&k!Y(HK>=|erO-mTL&8-c5XHOwy%$HNf1yhF z{C#&n`{vE>_kF)N@5UQ1XC@mMW)Z`9yo`ronBDN}`A*D2%))E6@a>&@z1m=ynz@*K zroqE9t?<7Y#6nLMzy{14&(eC^>yCFn~^ zK5@e5_woKfAQ)$uYXag}(AOUp6QU9pCEuPyeZE_{SU^lG%!YOAwr*Rue%po(zV#co zZQ8u8Z!2>sA&y4_oHEXQ$+UIfCJVfr(QR~MMj94#s%GfAVO3DYuEwsL*w_3i^A*$W z{m}?;@tkQ}lO=IP%Bz~L>852{mhBWBX=fwBn&zz@ks_gJS~qo!VxzKJDO5DZm^J5F z2(akp`2=gJ?;DFpg5i{ITgZs`<61#g3$sQoK(32JYij8=8@2|M(NHXJmnL0xVmv`9 zLpMy@aUBN-d#ec6v2e$PG7*TWR%xcBh9*+FRw!tOX4tsmRva%HU*Vy1Yq>TQ8};*9 z4NsQ}d?ahm>RwYf(X8Wjtx?}6FqW_VdM-8^kW>v#I;tq-EWC8 z4n!nwB9YA*Ge0SWgo0@r8vIxlT(PU1l6rV49c|(}W!nfl znOoW^)pb;gaj{I^n7-?HhLd#DFd!{9aLBO4kdv3L#1pZxQeB-Yu-7YR(K_A&)jpj9u5>x5y9-tI)o7c z&5<4t;e2h^h0_uz<9N^-7G+Dqicb!ZJ!ccF7 zuno0>f};FDCxM!l9pvLeEMqvwZ=aIKq9(356)x;|@yV=Fn#QT|PyyyO zAKVWqaokeL9QK_Cs-=B@R2Cvh)tEYYT;sR`6dU2PQ|m&}i%#LlGD7*5+#<+4mnz`t zlQX6u7?dKuK;TE5?O#f%&O@TiM>9H}oSHPnmsn7U-!M&{6=MlS5R-Y`a8P_g)XUJy>WOhm@W++*HdD;oJCTri zDXju##saccMrFH<<`qc`61F!`Xx>@^$r!bq%3v8?OpwQ$josYt5U9^4T(KupwvUUcrtfZWT+g z?&h6bE+Zxjq!A<|vAjhHm_9--v0SLfLoi?4^?W8JXLaaM1u4j@B&9ZF29v2dw!iCR zLUr`VQpvaqea{cVJ5=^o9+V~Pr6X^AnvVqp_zMe_#z z*o(w{i#}$)WxCl*gBei(4r!`5I-ar-tt+`pC;$?6H4&_}YIQghjQu?5?utR#`mPRmQdaJpiW zTkyh7I%V5y270R~ws4n_;A1JxLTWx9j%El}fr3I69H^J>?_mk&YuU>y(P+v-x|)|@ zqcTnCinO;tMXkbM*D0Xd7Vj5RVl=KAuz$&fvLGWE5?q5IbNO343FTYbFQ?@QpUCAe zP{;*$lhI7#@!Y{Bgj%%xu$&abAzqFrlYD^Bqmt{KC!T~hl|0Z+m>O6naXuKRgermB zP#_?x7A`_FsD0@a3zT$i^C{*Wv)J1k zNXpTPP-yhl!I7~@mZl#(29t-@VhdL{5UhLN+CV~%hPlZ2(D2AeFlksOX;BvJO)hq< z=%zY?HPvqlr6evaNTI=j!J$ybf^EmChmylmLf8zisi9cojtI1WPK-xJjt&fkvS!6N z?_5F}5W-|HA&{^6+9*KLcp?@Y95}}1VPhh@11vXi2G;!D9|6@2J4sRq3(1to4G$fQ zs21#-U~F=u(9H_Bby2G0CN3TcNtu)w@ed7gd056}y9!njw#zP?KiWwsUuVB4hr>!f zB}B%C2DrQiZljifZsxd|A9oO{wd+Vy;h^EAglJ%BFrwtlRoGXD>2nvmVBlp?FZ9>Z_nJemgL-;THC2n1f4*Pw&i-W!eGFnd&39p#bC0Yi zPaka0iBq7yd~h{YtM2_2)Tj5ZqH6VnUxGSyvWKd5zx@`}dsZjeqP?Cif1U;TRuUd! zzGm3!Jx{|GUk}lz5Vo%W1yC;!ETHc-4!;WOx&5_NweW9%`s*$)RqffgVQ%ODxS4MJ z>~i-581(GJYsr4guDJ6ws4pJ4oT|(2{~Xkrdsb4l=2u^X`f%DuRo|oMK)s_aCHt3` z-Tnm4l+;QjTXVy+aK+cg=(fwwKk^c&myXcgm0cM48>nY*sG(%5^beR#`HAgxA7qzm z@4%?%9_=H$59^!$5Y$%>T}jo-pM3)Av-^6fy5blA2KDjnE2vucn{PmU;4CM7+Uwc; zCtAh~Y+~OqtatZQaK$$wi>Ru-`FT*U9HZL}+c5MBsON94rSB~Y{~gp*yS-Gkr{0>& z6qU=+dvFcN6zREa&reAeAyZWK-uD?O$P`sqKJ*o+52t)oZTS6Mrbq+xvRfY~ReV!w zC6cY)_Y7PSGDTJW;TJ)@c(|Ubrm@#RJ+rTxs@B+>#8Z!NrHznXlK&SBbMBE1q_wbJ zB~nH36jdwlIRgqjMb+gGd;#jzi5{xfK71C`yC!Xc?501EM1iHq0>9{Y@D!1Aeg{uc zb;0l8DXPHlq;5~{^ioL;&z^s5BUx*6en0!`HB?>j`{(yxM%4wspT2ViRTupJfxDcl z^}i#2ht>Dd4|M{)qw&8d&}oRj?*xi~xp)FiKz#88szUsIC(vI4bMXZFIK&rEpsz#x a|C~U7ehI@&dl_a7j-|73g#DpUp#K3&1Vz9A literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/test/images/miniswhite-1c-1b.pbm b/src/SDL2/external/tiff-4.0.3/test/images/miniswhite-1c-1b.pbm new file mode 100644 index 0000000000000000000000000000000000000000..6cff9292bdbb67a5311e1823bead6ef123c82017 GIT binary patch literal 3031 zcmYk83v3kE6^763*xtnj#vl}2OqmTO#X^mYqXyg-G9whfwOoPZiqw_!qf)3QiWj9Y5YKm#&uq&O8`920vNgo}%@cZ0p&$2?BYon1n& ztd;kh|3CNKbI-lA6+g%?eRi?G^x4vU+r0meaiB33piGPofpQv7Y*H>q0JzjvVny|S zC|2R(+Kv8V054hq3pqyxu?$9?zE}=`aO*A$pa4u(A(VUZB_BZ1$N)eE%%-@TLG|{d z&jY9{2568EFh`~6nAjyHG0{iQ!9!61RL(?8!jXQAfWbme)%*Yn-NH^&*}j9n!`O2x ziN#9L!SFCn%hYy#6xH~-lW2M79 z_fukGN(1#rfKk+<7(US!V$3QAt#B14!rgWitq+;kDuAw89O-VGj&19&tHjI#fE+KS z5pim3H--|#lw>(*lSNeURUGK=yX0t)Cq>Gk$tOikm0^PnOGBAif##U%bswC6--mc(1KPiCVATm=s)>Ok3K{Q zG_-Ua%v07kjKm_p#JHb9Z%o3N_hz&s-V5t7rDm8;c{%Y*!5a7lx@`5M$3szbj3 zKMN-T{663w>eRPkI~|^1eT|*nP_I8!A&+|X&R%soh`ZL`(;yh7Id*CwT=f?EV5-rmN4T_}rbZ>5 z!RHr%5DQGSpZk6^4LL~}6vH!@p2WoA4>wpP)E?a$;8ocVFvWNpo%1ix9|X=&RpnEe za`M)Qje(x8N>ae7@-^My2u?AI5-BBFGR{hW*h^YUG$KaLb=?BZo3H)#)S#!3=BN{# z^H@`2tMDB-;5EM6OiUAW^Jq+(P@xR=1h2D}&5Pxl+ftjW?Q&Qo-_|eBBVFDF!3?8@ zPOonX+zt=5`YD&uOHS%FL%}7F7lIu$~g&IqxBy%IV(%sY@2!nH0dn@2i7G5g~>p(EUj>TFhxo45^t|pOd1(toIye02 zlbYB9kSrk`=>@c!`3JCBP)SGYaN}W&=lWIfc2Tc|5o0Tu?h0_7tQ!FegTyGVXs12U zO1l42E`dxuv8CY({80m-f+Y2fZq5thAUpv_Al+a3h)MEl3l>dLIjbs^Wb^s}8mZf$ zRNn_?Aly!j&G9C9(<(1f>(TctdrQrYflqPwf_aBzx@g(oB*$fsyc7PiT>wkFnb)0z z;ypYrOapks)jf(g4&ElH8IhT;H#{7-s5v;0T*%^x_&DC`ztGeqkW<8BUzo$Gh5q6w5GuVrn7a%47wPPFQ*e5cXbx^J+=_*nXwIE1JmIS#y%xhk@t#EjW<)y=2wi7 zclGEOzcaXPb2(Z^dl@l`BHr~)n-1|8o+LKDm6%4i{H6Pqgo`KGPPR5Jp1jrr;hlkmG2W{@s#NKz&k6q$bQmUNyMWRPf8_jluzH*w%?05 zMvNT^$+UY8{HE`QkKT2C!~#tK2h;DJjLbUm)EBRkhUuu{di?6G4JZE40?X-5T<3ao zL~J;5%saSX3&jgF-DX+`etc`k;-9_gX?D=&zp6eZ$`18s) z+O+Jv?23@^=FZCZ`rcVK^YOeA*4H=Y4bRKTdM)xI4s^6u)&2gJ>>Ml?#7~sU4?^$4 zOnOmLezu>n(bq3l^_QQf^&*|ij4oQ%r2Jvyl4{rL_Ai3t;hF2hcG>mPLBMI}i; zY*Y|QCj}@WonjFaoVzZII`p79$J=+-l~dHEkhgf^b2B#^j7>R~##NIHB)SZ9)F(1*?!9Jo=ng+kCN%Quy&qHje zQPOD)(H$DRbE;NJbE*gL$pbG$nq;!2@L(^;DJoo!*MmeU!{T;RUB5y8O0WkOfF+CA z;n)C=OzRNr{zClqKV+KBqqh0e5K$rBzgHtEE?raWOkQ7|aYNjePb8nBREpW=wkK+Y zZ9Sru<8+M^ZE8#E+Bug=V45ePa^THGbs`ETrC%iSgyes*H92M5)?6@o2#E=h%xvAk zyOfZr|I%e`;u}tb(WK0-lR@@=WBk0lZwNu9Hfwx^cZ?;J_WYLhJL2DnMZ#G z7RczN-A9~YJ;AYqE!~1yGfAJakW;Zvy8`oLVQUpq$L$hy7fi>tjZGSuSxA)UMHq3X zu5M*_3QSEeB7JOtRbI<|y*(!!oeGrrB5L$036tfmNJFe5PX3+I+q9SRloUIST%CDu z_;0N=JCsMH&s1$@uVW@S%%|mh9$qcc#V|+M%1@kM)iN0A@t-avyFb?M!zt{ng_mlmr_+RWaV)d0Y}CpBv3H7(#zz~BxHM{vqEMlW z%3})2pA3(*9{ovTl=9LcQlp;fc#{kaytTqALV0xR#2<%(MB}2f**W&a-Tfp*HBJ2} zgqXZFfrfC`mqi(pw9qF;R013qotnz1>7pT#`n_Ig5okP+Fdy&qW85+NUk~+rreKVE zzjKUhifoO3K)b!sA8rTJ{f4tE=rrG%s|)I5`8lg7^Jq zjCFR-`R=C+u}jTC#B$|?lc|cT{8doanY;HQ7H`|eA)6)CrA8s@kWtbVFp zf(nZig?`Lbf{0*)4YtUgHu0Kx7Qm;nd4%AwVIr*^Aog%4SR3p)p2pIeZ z>`@OjL-$|A63+SyG;KXaf6|GNkhGE2-SKFkpKhalG}>EyohhLu7R?){NmfO7T8!%> zYCyG7vGEd_;aDq}7~^^Jj%u=k(!+C(y`beM$)~z&A#5*&aL|h1Eso2s+l~ZFYKi7| z3R`y!_`7<*KY{2uS9jgt5P2J^W-ugl=W=5t3*~d<8P&l|VH?+oqL0iZ+L6YMkc}md zbew#0wS`q!Gm4@{ABoxLg-w78s^3=_1mT%owegPIe)Hg z-^iaAJlCS<#uZ0|!e=*@z1H*cgOhKJtMHaB4Fv-;@^ZEoY?=Gonk(x6@MLZb5exH& zYT29Juh3*%l!(s`3U+1F@rvF>hcREqzRcC~9 zHT95)B|qnH>yMW6<=qZ~!H&&@TwPytgkLGPqk_p`BGUc+24BA0p$M3NWQxnU9k>1- zhZd`8eAs9dfKCY`AOpU@{LV#}B^;WjUY~FSDs)>)G zEJF=t+cg_UYOCu{EPA#%rIddz$3)bknXKo=z`dG9?mv>3ZAuRII%;7&$HX$B*_?U- z9}>C7{B;(OQ1k}FLLm>>_Bb@MjWJ()4_6PSNxRM(0Xw{Kki5Z&R~l)VKWmHL#FW2t zCm5IFdl|Qp3 O=KQ~SPW3YtMf5+U>KHfx literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/test/images/palette-1c-1b.tiff b/src/SDL2/external/tiff-4.0.3/test/images/palette-1c-1b.tiff new file mode 100644 index 0000000000000000000000000000000000000000..25a1a3244377b66bfe11de1d4e181cb5dc582a7d GIT binary patch literal 3312 zcmZ9O4RBP|701u}$nGWqcN2o4p|CHJ2pdNtwS@wO_ma{=92u4h5g*HS0y9-JwoIrLcd4=9FpvinbCbNh({tZ$D(#*9 zxchtmbMCqKo^$WcpARJf*?$w|(Lc#XYBv$jBt!XVE@4X#nX|))u5UlFo}CHoHrTx5 zhZEh13?#(QT*1KP8I~gy2L}=D31hhf6Y;jeA_Mc@?nCU!Ekta`ugLE~X0RgY8$!@b z6?MFWc-dg+LSUEWhd}W`G;oN#ATwMUBnxtjAdD(^c~ifD7|2ndy%6@d{GJ?0WKhC(JJt3oXym6+>)p5aj3`5{PG1EMH>M$F0XuE!)g z0McbBg62BTd_zqAN_XnTd}~r*5(J5{pw8BwHf#-omH>wYT0*q^ci7XXF}YpI{-aqg zFZw;Pq)%tYpAbTzhd^0c5#dbgX8M&*2q>juE6oqMt<=k=eeIHNyex>K_NqZlrZpI3 z6h>HRZay3d5HtN9OuwB36W)ZvqT)G%j{R1+gEjP7AsL(0pMCdeU(!Nblc?;mv8*ce1X8VF4|RFNAkwjb_AS}O}ID7VEI z1JInIbFj zt>xMR{GH-QOxWm-)F^KiQHg}{w^~6;7fz0P0t2rrv?|Adr^gr^m{mLb1~z6F%?n~n z)Q32<8d>;c{R!;32g*uur#8~SeunnAdgD4KcO4z0V>Co#?5RY12D{RSH`PWh>}F^g zl&GXrojbi~2VWi)<}Z4TAy=CqweFQk%xTQ~C4C zf}txkMw2Zpgxy`Df&XNinfi}y#B^Jep9xx-2A*MCqf>dx_6G;#eZGS&Vh5h<9Iws3 zNV@(7wyb~-!o|(oG(XE3 zKN+B{sYmScn5{enVmyv4ve$2C#9Fz|t|r|V+=tL^D^w%IuGU*14078-zpXT<%H|^J z62!zuo9yzC$GV;%_ARkcU>_5-kzRS-2B1A9UD-4?zCN5Jo91=IC|_;z>O`DrC+WF4 zk8E8kQK}m!=Sw|Vg9u%u<70rd%^8IUZG&_)56>S29k<9pMrYO-1t9o7*Udt=jE;>k z`H2!EzezD;2&+kVFO_vHQIg;Wa^FaBC-s_v2>*0bPRax1!EwHeI`vJ)$-$X(DK)}g2%M9 zE;Dgv7vkyCVI7~_$Yu5o#FsqXu)l1oc-);E=Q<^A8|-x^;!uW8j2~tYHW1bKx)Hbf z=|)J!5~k&t{nXqV>k>UA)3iS)JoMq6n-9=nlv9*fJiVOo{_B*}bllVLAJd!SWz*gF zb?5Ck_ZR3SR!X{AkH5sv|9DlPrWQ|;)|zK||At+Pw6eOu!` zh8Pb(mdu`#K=o>Y~PLRnDy?L#Ijq6>6Bh`Mz?ir zKC%FB08C8l%&8Y2QQzBn${<~n2@s7_ss-f5|GHGUDnY3{ni%(Ih8D)wpL!#nAe}_$ z8S-cO0uOXt-&e7P<}iYoR}!*VviXCKpko71y$6 zOgOT1MGbyHH?c_!aWDxxmOjM_&c8wa6hd&2<^hjRc~I#U6jN2GZ$!$j$ZyCJ6S%bn$hE}|> zESj~yy_2&om43=70AJ4WwuLvgc5#M>{B*ri=jDab5sPbhUI3mWTVi5k*;#qj6>kl2 zlTYVNxc_(*o{T3w-PMtl_S9=!9E1E`%VVxz=S)0&tWt&(flhR2iqEPb5PLBjobeG)4}B-!X*4n%{wk z%GJA=^;0M%2JH-je3p^VLxSdUAN6~L$G+2(4r;5`t=P0_ z#e-9pKRD&t$(z=!TuEo%hN{}tYnE@EU$tt@^0ms8$v;pwuivm@-HNJ>E2@=+Q>H4b dH*Kn&QCeD8S2y{8#gl6`tSaSxc}1n({{h@2^>F|I literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/test/images/palette-1c-4b.tiff b/src/SDL2/external/tiff-4.0.3/test/images/palette-1c-4b.tiff new file mode 100644 index 0000000000000000000000000000000000000000..38ba3253f08d390e9f3af28008afc23825e1cae0 GIT binary patch literal 12322 zcmZ8{4Nx2DnPv-*=QgRjTeZlD8&|4=T9K(Rn;C-;RH(W$F|FDwseJN)y10_rHG*{` zvZ>r41_XqyOg0xGU8PcUn=KjL5;9|?IMb5j**SSSogeN%lWwvEF@X|=z0I&@BRAXMXr$~h%xcSdJ zk;vTKcqB68$*8JYP~T2obDkGPC8NF;U%0lgoJ>X%Q}Knw%)RQJMW=R;;b|pxb43nC zL$O#azPZWX+tm;GfAe9^cYH&hoR6ddpsG7N`DEDHBYKp4{>{nd`MF4JIi6fth%O`+ z?^W{a2HHU>qrL|uw&JV%3{Kboab~lss>jNaJSlk;pkdwrMcD50dop?DwS|>y*RaBOR1w4%1#zy%@xYIAH zD#2-YG)=p+JT;k!#3HfD#k^BH(2~)GYd7DI8c1>cSze~E&?_Z}^!@67rl_j7&jeCU zc00Fiv!XYjQ}Y8$0K;05WqEFLZW892-MC9Iq2x+577B&%G){nVpjFlD9RYPecT!h( z)HJk3x>I*H-s1a3G3QO?UNg|NcP1z2fJm!jbp=<)V$mqz*fTt=#A9n9r(PEV9yM1{ zH!3^%fTAdQ!c(ueh@$8fQ-MoOc6a5;EvX{{v`E`WO$=Z)#l;)TvDlwgOItIx=K_I^ z&59S$X-`UF;^u}<1CH=s8wEXG*EH*-B8lk^z)cwB06}2D#3E^9ajg^?7A{}TZ&a#9 zU03rd11?v)1UNqcJp(|4lC?YXtmIe3^t5dKToVo+7a|l|D7GChnvmkxKP6{T81 zgj7@y!R-`PvHjDc=o7sjFEa(${g*Z=;K{+*=9VYqfCV(;m*D2{pbU-7N*PECEAOZ< z1sTHY<`BG%nwZKwf&1zroYGrVQv4U1aEx0hL<%I1wBoVFNMvL*qwWy7jh)+u-{ssK z6z8jn0S|*iv_}IeF_$~ZyRF}OhnWCZPu^M~q&OUg*#c6>mLm~ODQ*C*qN<8lRUxYT z68T9kC#LeR8IE#yIUUG(i`CmhPoFo~f!Eh>{u4kAtK#o`l)UBIY(P;fyVc4Df{J;a zS8C?~hvkK^Wim!|HV^(;;AZlPQgb)EGk0K-h3>+Dk*9m8ruOLt(G%N0MJ(CMd`BFt5*lP)^%bOLt0wCc%S{HSM0q6dyHvDWbJJ18*mcGHQD8q zHyx6sYIALpq~sp!e`n(iSt-f=>A$D^M3x9enHw8uv6#kSp3rl*H{ra9;Q>b=5YU2c zX}99j4~Mu@2>=N8pk>e6oZYeTH4)YKGZhhq1gwaGz$T@TjjzX(WarNlJ-z$;O$Y zQL+TN#)FUmom-hBD`P0d6mqY{(vWwxh)0!C-otY`_~9hd_E>e z1hzMZeXvlQ1xdBE8iFqmQg= zdBWRJB}tSx6M@n45BP{spXgz1hEjRQNM@*-G=NXmvNi8Y^C zGvFjKa62uzUj$l9lN=zv)?fKvlN%9wA}=?8Bnep)ylRa`0|`_e@JpUl z8ZJWQenMBX6dd|fu|fi3#ghcVv_=Y~Hz958wj{JjLk`wL!p114T!8eZm1!X;82xYZ!54!lMY>~?Rrn|L$NTa@2rqJ|*u zfA(xt7Mk>8-$Y>0f{dibB&5fGy~106C^)$S1%S%P8y99U2i-rtE!eMjqp5w zQ-QEiDz4G5iK$BU9m*_hB|(_k0FA}nwY3My_ydG7$6ExZyT)FlQNcf5uf3U7HBBv- z<{+yQ2(hc>Xitx_QT<;A8t8qKQ6rmv6Fsi3uf*?yp4nu9VPT1rO1*K|5CPYCQ`5?u zYM~Sfp2^=<5T#JuJs`~!Mb?yo9n1l~Up0h<395~H18&!l!~qSu zE0_K%61<#C2l8?(^lj%c+82N2=EeK}M0jx+HVOOCiYE=-5i-F^lHcb8++GfNkGlQh z!1g}KX(QA8vIa57k~)JU?Zwyh2XGRo z5r}{rhZi@{{_NF|`|Nn}5Iseqe23>+inmf8MVmZU(1et-imGMH1r2a3fS}-`6<zFfEc;vs~^r5ehFsWp#^rewB`sS;&NC;wvU=2hyDn!ZzwP;o|P0C_Z#(qoX5cj&D0&_b7^{9V-C^Vr~>Rb-kcc z23donfn12%*%iu81iO9k4ZsQH#bCGRJ90eMA3=A>F_M(F@n=dku+pUd^|VsZ)E$D; z%OoMeHHB^F6~Mt^V2W8ug#SL)4;vSJ`cEZaZGge~rS?yh);&_GG;#|vLv)OkRst54Vd<%5vUwGQ5ucp?v}WZD@y-XR@qXH+19A4ZdP{+ z8qnxcG__NSW&;HInLZH}{J0CsBX*B6`ro-wBOf~a5EiBU<6G;;qg&aLepsTQ?(V4S zKEls11=vv@WFcqxAUO|$Y#cej=X<=nC+_OQU|M_VxadX!k+`Sw{Yqdood#T{P~O=n zlqvXdF=_?D$%*I`O9KoKvc|@^pvCTlF-|In-rd7fU@AToq?(&bSxZ(41f zNeav=&|Lv=NHhiQ2e=mcM?S*dREFsI#UgSsc$dW@xFomO`1DN}_Ysu$&@m(p38=G{ z0KlXXDVPaOWhO3C;ST^nfCz@;lj?h+dE@mOB^kh>pmHD2h0pIGZYzyF zuxoGU2#ss&IQxbiX(NVWz;36QgLAs@6s+i=`m99#7c1{EbYn|! z#$ZQvdUt2HO7&Nl24tnrKQD%WHcDG!bz-F>lr0;o1#{QSs`l)a7c8NH5X?5{>P8M zi&@Y$8e6<#a)@pUb%NW3WoiA?erd6^@QWz0Agmk=e&Uv*lqkES_TqDz)jCOgKC~K` ziijs0e=m!1sJTs1Qb?2B;#O8wH@6wyKb$(Z7)fIO#K?i;7xH;UfhVI20>46m zz68dQtxj()EuK{Vw?&AAXO&Fe+?GzIQlOVrN{DU4Q9fvCU!3{~{zmMqK{?oY5t35S zQhF+=C9)7!aH?PQy^F5uL!_jRMa7eO*Aeh|Q|V!DX(^j2>=zijA97se8te*k^kC%| zVG1m&mJqjG;DdY+zgA~TRBNJluObK?!mKBkD!Kz1F(RSJ{10=oTc8w_eZtQ@Nb#ZtqkUvsB=9cuPy+ zrG*714LlgC3kL2V6CBILAomu~czY!BN9(>K?Lzi;-x37sV2ihkISgg@#7i&Gk>fl1BH_u2$z{-rjfFyFS%xWt z-A*Q(hvCVMHSM+;nyb|tCnx`K3d4w;Sl`umF64y3i_-`VvF<&oHn^7YnaEtPjJg?$ zMPFfPq&)JzHWXP3SSk}(gC@x8yH#xL{_LpzDX=R7?p?pn%}<6USgn@R#dDk`I2{Z= z3pC`4F*zEI0?CMsNeYTmmW?l=yn)jghn#@RMK{U?3+oWWBX-fIab@|82aZxI7+$R1#)LG7NcDMY`EL7g&rY$jx8c6{uEc>I z=B~v?h2S`X0|?E*m}Lz-WTFV70(GaUyW5cq~(K{B!{35yjayYgrR99ifNjUpD>?bqRIIk8qGdmuPGHJ_VvxQ1b1FD8j%t^&B* zV8@*zj2N~u@mE42mhBD+avgM%IA4>nwo1ka049c73{HrW+DKzy6C_^ zz%wIWL62X=+?&A4Dw06j{FE;R90rMLiI-BS9eue74{U&3u~Mnz0Qa;kClX9|`V%+` z3&3TRJPH#NHZPfxI&iJ%u08UDT}?dMYa9Ws=2IKHkM%tja3m~|W7RwkxF$Cg3oAcL z>8`-su232RoWDo(4IcS1W&*6QqBjQ7s>9xB=CEZyshrf|#=#&(KU#xt8tj<*tX7^+ zXG$ds3Urj^lEB&7nTBuBjmZ#nhslP1giakfi&~s&y|Pn;uq|K&#lfy?`Uh69100-= z=i8_k%fpL7u#~o$>^(gYcd*g8LeoA2j&={eIFpDa3nV(I2beq zZ7ryaD8gX33Aio}PT>;=;k{R`Kv@<9cRS+NrW23-WC? z9&l}eOi6>V&>gYkoUTFG;L(xq$`vv!03SDyn#l7ov8w|xN9=gn7}R5b@Cu-EAX3Q?v}UaMtXu{ z7>0d7*%(RPW*WkV$mGCGf&8wlmbL;T?IvN^b^iQO&(RUVAp>}heMdmUFc)!#EZ`M= zw>ci{rYK;O4*-W~2)3D9rY~5`W(SHQ_G3sUB`rP6Ls+cyJ>nzRk&6hSZn%dqjb++{ zlcb8d3xES7suRhzB!ms})-eAJFA2Q4Gs9#p7nDN!Mz`5yCphQuu*)R@u9gGhAW|nY zE|Oji{2(kfBni+Xc4XNgZ+6&bhiqn?_m$9i;@CD{Qm)%ft#+rtActw!3P1>LEDU$N zfcMr0zz&6ngpIGQpw3bz;RKt#yMrIime5?Gi7jK!aGmEY_HH3;cLLFY*hH@)G z!hD^CWWKOD25y~Y;C+{G*Cj3Rkgg9P2aeVITsAk?d2y4rf?!jyQ)M zgaDxl&fzCRL)cn7$83R0fxw8%V;BU$5rKy>FzOEN5elUOwmz?$IkOe?IwO4@t`Ud} zfOY7S$YIeu8;jtui%F0lV|GJuCfbVdy!mvR#h3=&l@#T591~b4npasJ~8X=ZD#$bYZN@yyMy{|lm(FMoL$WR>rOd7cuC9#}`7fWFi4K@UqbEZ#_ zh5xvXlvwY0d;&2z{U@ z^z{!9Ii0EgK%XE8LrBP2DbgK;K}w9NK&-M9_$2iDulJ+d*Qp*-U+Kb)-gRz zVMcHP_+1uF0FEQU4xhoBtwMKSAL633vs>sJOoN>RhUj;vk?kq}f!%l)eQ=@|s+$-S z!r^fkmgCGO%y&vEVm6NrsB)eB#BA!q_8O)ToU!?})-bqpanr^S@$#&#Pm3f~1d zYTYN0o6K#I>A48CJ3$=wP@i2Wpe4)aUxydtOA%)F8Rxh#GdwH^{r!DmAVXMC^LSET zAK01r^CW98w(DRQiA1j9=Ag*r+|^6~=@_1Z`B+(b2_HnpYwZ#`W@apu@yc(#WTbS_^OP8e6&pz{p(Nw0u=bm$oQ-<_l`3)Q*N6fR@$?frPd9_d(b| zcNmUBmZgk>49YrfVhAi+V@ui{0M5-#PCEip32GzDf*s6dhD-5hg|mIIg3}r9?r;rv z!%+y2z|eB%9+JTT2c#(kMen&RT4CVfPM$?2JBsb1nkW6e4c9TzNnxwS-Z9f*cS^$! zSLbkt#Rfd2Ct|1MP%7BsyJRvf*by4Z+ZJ2|8cacMS5{$IGX>r$2s;smbp!Tp=dd%} zfheO4fB_WF*gcmFI1|i@6=ZPQmIiSrXK^Z%#l(R&$K}@{0on|NMJwsfDBpqWf(1Vv zf+OJf;Qp1=dV3QN#jJOtcfx?v?uRRUWmJ&=>lv(1!aXj%AP`%IVMJiqSj z?^};pf;LOFO7tsNlT+!=oab7s9a#OGI3$r zz8RwDbfWTDES6R~ru8U2eo=aQp6&%CJc_bjd1`EXlLpSCcjm6b*+;V!5up1vauet= zj;-=UFB*aM*;(fd!tv}`7>D_>yZvdPtpX1T6B99Hy|Ha{_vCrO*~O(2#z`b>q5Kwe zIz!qnXLq+{qQ7Stab~meHmehGX*eEke~2e>Do}K9xoNznmO!qWzvBDS*WIWN`&Yca#S2c|e3}Tc#p*sdg?Am6RmbL;& z?l?xFtjHGP42Kfm3fnC9urSiyCj@yLMugLa2wyqyMSiK8@vBuU^T`S#~ zgVu!z;(}&vq`D`5LXlya=(7baXN7QwU^7U!fZvtI&IKW~unKl;J&4C(3azk@AX_3{ zY@yO>Z1K;c!Cu8B zgqOsgc8p&9Y8gan%maTppfhiT2b>QKZC3tQI1CKw1Y35T7ZN6JjX*YdWeHfu*#v~2U|Zkb z)^N79Q@8`0;Fr|LXg)!-;*2#E!u|xu4d4h#VT-Z3PvUBJCPpYsaT;!9pi#uO4u;#B zHVq^QJ07&oVP?>zXr)0NMr#;{MH6x&mW-|>wdAWZNlS~(0Jlj(AXN#Dt!-WZ?`(RA z2#?{WS~Qt5A`L*Hc>qR9QtY9o5;R6R_`sTlwzdzp;Tk|HAHa<^n@GR>gRKk&IBu#1 zAv(yz228^=F_9oFfMEkFCu3_59{i81TVMv|!ID@ytZAU^AH4qrw=jnm2DM-=8k(P< zT#kZRe0BBi90W~-qKm*>NhEOl#@attKA0txCkr&$!GnIFsrT+3Z0_sZ_qMga`Dg9t z=-=k1=Az5dxn&t=dGX}-!8=Gu(A*0@k519%J-)hDt$ZLnfug?$`#SyN*~aG1HV$yW z@%>75cUyn|=eT%zYIzOXDwp;!7{2 z-dSBOT`!jsU&^#^d@B1}Tc7;0yX8IW$HuF3_t)P`{LuE<(U-fP{SW`{&+nCP{N=y> x+pquV@BiW#roT4d>^krM%8QxLJKGmtc=(xfgTF2P&hH-$pI-gZZR@N4{|7D}>+%2q literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/test/images/palette-1c-8b.bmp b/src/SDL2/external/tiff-4.0.3/test/images/palette-1c-8b.bmp new file mode 100644 index 0000000000000000000000000000000000000000..215f4c50dabf91c65e4c6f07c449c7d67fbef359 GIT binary patch literal 24954 zcmYkE2UwKX7OpW=b27kyA_{0kdIy0hMLI}VutdcM7TOGnbVVb*iijvhaE1Y90Hs$! zQJPqy#_lm*R6sxz^@tjK?)}z}Ip=O*g5?RX->Q4>^^c?X?yX|XnkOzM_8q<}6Dt&( zAtr(*iHWhq#5BZa=!<`=H)F=)88d98XD*#N+gw4{TFYw5qUFmZB$i7{uK8}( z+F8m!$|`!z(Ox&(#9PDCUs`hK?0Gw9O2*Amif7A3%+uaE*EmvhNto7>m_>Trg{sjW zOT$&&*6ObGw~SwB9PY2?@so~QnBLkDUAGwhH8JMvV$J+H`a44`gTt1@hU)K#{vkNV zDlXa}`e)Uh8=Yf+blel`63f{b6tX0JgH_&!r5V9iM}n==qiv4H7^H?-*Z%C9x4|Vd z#I-PZ&9P9I^feYCzuYCk zDb}$mCJ~49mbaU`cN(p1GU3!OSX1j7eZbwX&4=5%b^CEOl>v?Uee<=>YZ>(G84hS^ zU(j1Tpl^Oz+w!8h5iq_Ju}~{=09CF_kZN>f6I?^YiIQB zAGhAOF3ebRAkS8K*y2#Fb#0?-ak^(gF1H|ixhQi@ZJI}C`i~uHZq-LuojBszR=lRY zXh&B@On3Uut|Jjmhun|UbMx!HPKj2X61sP_`8L*vb(~z&m$T-4k?;8PsDKuAlb4erCs|>ex%w+i#xOaj7%*QhV^7*4SI^ zu{UeOA2%+^{ne`Tg73jgKOea6*>aK7aLKm+qQ`{`YcCJ|cw@-xw_kT&J|A;sV8_k# z(Km;Fd2%PC>)@f1QwLh>Dk_hs4;396$~|$lF#Tdj`t8o5JE!ulp6t9;Q+?-D$G^L3 zuGKb=bY1wp^Xl(y*B+kAEWVb1@;71om8#?Y8CM4LZw`v?4RqccY`%E4ZS?%Hk)fgA zhi(s_zjXKdh0zQ5MlRkSzdky7ZJ?&g*sQ4G^7R`xZ{50a)_e)db)k9%H#0S6#75(E)d&43);Spg(2gJO*L%&YEJUKo-IS#&_4YnQ@FzVL8hMMTWkKYlVC|HUV? zj>zO@=H*?xGV%7o*eLM@7S$CUWBBgg1>?<|w;8-!x9$RP>h0Yd_wL+z{pL0B-n{?x z>EoN%V~?8#Vdcl8Q=_ln{Pq6*n>Qcczkb}bZQEAmxw3K#wr&Go5PmkH;e%P=10gpf z4}e#%U5X73<#IV3#;6e-os$s}VPO%($c^A~QZh3ST|4>dWx|6855PA^Q10-+%b<;XT&J4_VR3j%|PY(Y>E=)!+yxCjtl#pPyjx&H`wD4q*CEONi;6&y_e|Esq3*dTNw*_s3|NR`E77-iE&CSaLNqA^bfXdvtN=nLs z;o;juw}*y9J;=uaB8RgTYz$x+hs%lhiIbL@k(bx>a`eT?Yh>S06~?^N^4+|JK&Ex~ z){VP2Z{NLl3$V8lEO!tgcW#4oYU=Iy6yh46uU4c6fv)F8T`33X0Ze6f7 za2sR{3RG5Bnk&mLI(!l$v;#P!AW_mH4e#8;e{Ns9M!B*vYM!(NLkAil%CO`X z%%86$%aW0imX?u{mX;>rART?;#{uvgF;-w~R#tji8cdHBOH2`*;NXzp;9z3T439|T zq;NQi;ly|S*yS5H&R!=z;1C}XGC2^&rc^z>AR=RFWNT*Ky?P=havna~?8v2GT3`SZYC$r)^;=eI)qoMIcjE({eX8UT^ zY1x#ph@39NAS`n$4D#W3$;THe69k zTypXGk&X*3HVX}mqawqpmR-8^>(zTxQ^-|s|N8Rz%jduUKxh;c9LUMxP|JMc?f@ie zXlQI`xPJX6V^&h{#!d1(Af9QgIM!H)Rm>J=e%@C(QG_H2euR+deSh>7_+Q3+9z zYC3AFI#{~8dXahw+jQnDK{+{cOnC)Wc?AVk&4mlqEtfyIUpst(Z(th9iH(POue~L{ z4}X04`0?ZThxfm~IGS@HV#}7`uteg!_L^C*z*n++S76{AmWrmarg2eGQDI?m9q`U{ z^_)3#w&z?=PZ`MpHiG*~2tJl9@ZfP#QE)mPeSJMWJ;)aor5B~A20)6Nd2mZr6-{je zBWr8xC5trFB_-8Ot+drR8Nj=A>)ppMUp`K~xKgn1%8`8qd5DWGTelz={u~Ux2Y-F~ z^#0Scw*w8uB_)x&b_LGSG&3tQD=sc7DlR@&2fm&&U3dXsHv}X=e8|emGYW!_Evq!2 zA|fF{Pe&DaCMG7vCMMAdCQ*8kYAS$RFb_dZb~gl`yPcQU3Tq9?Z)O@9D|5JcSFc{a z_44i8m%kp$JA}?OFE^VLv~??k7sBZG`=?Kz(36b!oH=%^BxcX9z`2@5May7X7`KAa z?@V_O*4dt(0eIlFh5u_`#=7&trx#@r1+IPJU|gnsvZI zmpNNFo0>*jSXjWo3jn7=Ua4zrWn*pYWov8awE|09Qd~-j8p2DLE?>F?yo{`@?1%t( z%j|%y8j3E12xUc;2)N0uP}H^G3qH`ufHumd-A2ZqB9_&XCYFN>>ezr=qH=qibSp zY-VHYV&`IO=i=q%>*MV*ixq@E6}@O4=yF1pSu?&7mz^6x&Ii7qgTsO&f{5=XYTKEH zs|^h#U(B98+fA>gsPI@lNLQ50i!bwyG2 z03DJFn?jiJK7AdXs3_9}JuN*WxSt!$Yia6W<7|@qk&Wsa~ZmyrwO4T!*}zyGru8r89!J6r*-f zZaLG949(zmmrZw~Bp@vW$o%<;3iw^LiN2npsfB}!o3n+5sgX05g^8}FrjC{>>W28KqE&kMeXPo6+1DChH>6=yIlAuz?jCm}zb_kx3`38(pruK(6> z8GsbKyCadHcWnzaF6I>%HP#{jQG)4$|8+A0_SDzw{I}(!%*qRC+N9pRD zAUvGikp7H}5FpS`52X&4H8z9u0ngEeiC;^|5Gyu4D zBSDgWmydnLgLr#(g@?n!k;RpK=vPry1wIG}y!v{^!op}4Iy$DeqS8z9F*OYZ!<0$~ z1upo^OidZSC|y19K|3oOD`!VXCogxX2L<{3av0dxWhQiE=p-a$BxU9<*t!L9!27Bo z@fCg54saA4yLN>K2C5a83rh>DfJgR)erOT8db(lg?y`Ak*U>0ZqM?@Ldz3V|UsO~A z{LjP?`aw2BLqj7|7lbkN)7LgMf_TmjF0{Ou{O9E(5D0t)KE8?!9}!APipk6dAEg%T zL$++$i0`TY+rwD41kyn`iVj+Z!b%>xgGK;CK&6?&#CME`^rZzUw@6r&&`;8x<>1>vxE?b<^hv4PDqs;M>5YzG?GrWc1UV7A}zTijuPOJbWq7)~pg%6;{+&Rn-Hqfov)rnmb{y|9vrU~Ig}#*|$QEiKVXnM6mUewdg#Ta?+DnCKds zmN}P}T3G7n8yFcFSsB?lxDcY3s~7b1_7(^LC}?ixBS55N=Ig7L&7wFV15=9rc?%Q0 z)B2Iysi>$ZtEencX2BIuA6V?ds!Co(MI$9ZFVg2B%o_CH8C(VGIe%waVxXX(>25|mMsGx2?#=FdHa49@LMqn8F^KG z)$dsn+|As%z+K0N&tGUsG>y6LhQ; zmdOE+A!M-^%vaSj)Q5gi7AUs*dX~TgpCQsqscRYE)!ER*&;a^b*&y{ze|i;q@w|P! z1tMR8pGcr62IoVOmY0!$E6T8Dqr{Po5x@8%`zmRw?23t^xK*awCCx(rK6`d_c{%TE z{XmOfKlr#w*gMcfX09rm59RRhkdcvLQFs_yB48n36pCDwvvaA1shP2%jkAkuDZk9w z%mB;C#>$4|b8towqX6?MN_>6&e0>EA#U!EMe0jEvxVVh`7932lXb}d`(=8Rrn+i01Mm6er)E%RdQUh3uIjrib;_yRw{LU9=+DR~)WXXRj= zVFicb90rICUofMeiV9`DIV>2Tb`~raUZoeJ!WGvcJgC5th2enp-Szc#l@%3wIH;lp z`OsPEn;4l;dQQ;QHMJ-$qo6f~_c@ok@Ll15dd9}k&&JBg%*M>d%GS}=i%0cWz=sEl z{F>FpCGpQ>Nr=mAMZbq*R1Op*L>PD4zRCg6Zmz7P6w%F|&61W?G1iqs0Q2B~_4q)1 zpumx3>jxU^D=K*=^2A5ci{?q+(8Lma(FukICSaqaM^(ha#kCB0mQ;KV%$C`hnVBxL zvVwW7kzKsJ;C|jB5c;VjK4jQ3VyvyfI59_08itKWSO|`?$o)t^q!pYXii^w6fnDb+ zYs#?{bX34s0Y3O!J&|v9iak^^Un$n-ntQd z=!2yZJ1o%6S+A@Tr8`dob(L*P-5>1RSO+{982S+&(hjd|!PoGGe(L&0Fla(if+;p` zglA!5WNL(DQs&KfEp@hlerBZIGBl?)))XYjFz$#D*jFHGYx|cN(z3MV+^sMv_&}G! z3Bl1H9jd|$!AFNZ5@OQ8Tfcd;9I_2<`B|)G6@}0b7OtlT6#~|ix$7G%D|lt9bQZ

    W@u#LKzN4KTY0s%dD)idvig93O*MXRA65}K^x)& z9hQuQEaH`#79fU9;{lPn1mcsC1R&&FziE@Qf~?#;6)iahwv+*nS5c1!p}xMM;Y?3` zPd#E8pJ=*D-Be}C|6~-gvjOa{(^812~?ot+g#O zHj`e+|GfEpG%&;`DI+a~j2A=~Hl$k$Cn7N=F)|sj_OYp(bOs4saKA*_z1EXAU>B@F7(X+Ak%3Qi|~ikQ|DP*_n` zT3TizPx{T*H-YDwTB0?Gq6Wc)YMYU>4R)B|TfP$Vc{>{!EwNf+?P$H!(b3ixzUSgi z;fws@?akx+dW($2rDdei6$BxEaT!PIC8wli=HQAU1vv)(M|7Jvub(qlNscvd-Yjk7 z=xCclVdm z=IuK-VQmhW$C6W9sH&h7ZDU-hE31eNT$2#~*9hA-^fbT$>zlv}zA_8&$;fLVrCA!9 z;G{1K(Q9gAX<_ML)Y`=w?&reep~FIU@%9n${d@%u z5)#t1D-YO$_?X7yz`BQz9zKwWD+l5W-M(q_rp@b>WTja;Hrgu2Hm1h9x^i+w#iUvX8J5X>S!pzFmKF|%hQ^2tlw37F%^M{aJ|C&s+m|YcFaKLKbaNr#CUQWm z6f$qt;Uia$X6K}aK)*SR_syZA%VL`;u$`Ut3>8@OB#n!Ug-wXq`bL~?bT#1Yg}kv5 z0g_-cUs{T-N>HZww6JhrSjgxX5D*j)7R2!7aMQE0aYFw5a87C>_?Y-uzkZIAjuKnKz?ki9DnCm>MxKR3 zqWT)dFNy~I4<)1vS~7g4CThqoI1OEdkodvK4a?Qd$qk=QPSDTY+mo^jnQ^7a$$p8( z5{;#_+#TKBY3Eie64l~^>?`tZ)0U86W81NT8Y+@6B{excC;RC0D@Pz;GWp-;Knmc% z^(qih(Z*nw0!v{YTUur@`YRF)_GLP(9`rD1pDTEcz* zFt5$e;c=)01s{tWQ+a?sW zwKDh;`Jb!WIU``77K(~D}0N2l%t-DKsC1(5=;H3e_ycxgwcl| zja66I_SMvM)O2)oirV-y#bu`L%Oq%u4+sbY?uEc6S6ew#59uzvk))|?IK6I65} zbxflb#LS9{E9+rmYWt{(#syMO7s^OQp{ce!_{_0ITkZ;@5*h?tzT9KEzrVjH>9>6&?2A;hY4aR(T1v|EkzkPjz}MYK7c>I{eS_T%^;JA)eR-*G z4IR)&@m-xG;D9ji`kkA0ZX`d%LesB_ z2B8JJB6I~fK0S*IhMvJmG%{5cE`|zHYz^=^xw?9JxUO`CdH^K#{Qdm^2)_GIK79E6 z;m`krzvk!!?_1&P_wfD$D2f4QK)j!W=p9%xO+P~d7#?5dQk53K&Dyg>AA|ob2TLN^MCXV7?0dE?Cl-hJ=}eL zu^GBQ`HblPc>ip&x^s9EfDhZ66~!dQ#pVVD;MRy~5CE8(l7kfZ99P1OeUY4ZZrTVR zBr|Vj_^6+r9bF=90$&|%+!}BR(bLmEfLpkpE+Nm5Ew#`QrQQR5ya#UFAXH z;pw;9)35E}!$Rkv5S58r>-UfnSa zzR8D=I(@&z*}a6A6!0j1nU#}94gTThFP|~?g?`(&?*trP0k<7^%!b6cko2pBjnSG? z{yW&5aL=3n51Oq@Ys_l!^3SI z4hRpLyO5IJ5>AI}(+LA;=^UxyyNH^~ z%uMS|)wPYH%SwyAe0aFxeWMuI^IV~ZY=7y|ny=46t7K-&*CEb_nLU?xa5ZrrjVpr}d+1EY%;)^{TV zf{(0w<4j0n^JyrN2jlmZ|87d=h(X!`^PW3<4t(8;lHb~U;26Ny%iG13Ux}`6xOSGf zM$4&=T0_USYHYzfItRx`$H#_UygE8-+WHM<(FL%rqnA&)pc&b)v$K75hmSkzhZI|B zfzpBn^0TSL(fJ0`=jTlGZQ36a61p9PI~lH>6d-UvLX55|hyPUy89owl;Os>L#JYLb zP)cTz`wAZji2XJ;6}8pN6=&KF4cEHP`j?A$=cyV&%cp9WLm+^0JBNqwFSi~UK0ZrwrZqN?9oRqijZHiq zyD&1wU(zRXGBs3C)6q3s=HlfqYHsW3=x7%qikp4aXGloXM4p-&_>@tCDTWi1;eTKC z3)>M!A+mGxMy9rXEx{DQF%{&0(|nCgkAL*GKr|Bt$ld-;iD(_ z)kSWKGK!8~$c4TFQQ!EpiKn9%9vj*69ot-N6;*a^+ZA0}>O*}!mPj};>9ZCmyzKdE z-*2OZ0oE{XSlD)ECzqO%O8cWwcprmDrI#@)lV1?Pb7Crm9i&}lBSi?dapZnC@p%(3 zEiP=9`YLyH%e4qlY&OuHJW^NHS7b{Xx_H6tzNoQJpN)?V@ip4K)lFOkHuF@}c16Y% zmO|b(O9GEzmlbT5S z#UGAH<`5tH==IZ%N3R<;Y@B0O^$(s9eKe*d&Y^-JcHw~}VAPxdRRFFKb)uRvz3C6L z6xq6l3;(sq(ZkQ%y}5H@^4WM>t)fPGsWE;>#JADajf^ZgQQ_s~;obQZ?e(O{+LW z$f~f^&;Z8@qV_gHX;D#0MFr2N8NT`X&p#ioFc-&3PIOUODIGkOB>-}FysK6IqPc$}NjYA_te35(i#c_g}Gb}XrjA=K5Z9RIJz=|4d1ciKf zU?sw&j!xN_4u;`7-MvdWKv{W#mbv*4IDN6ySJkWJySX|GhleLu+I!fq=mg(W!&$Cn z3w6!t0NPhnjgG#v?Nmp3b92Y!lRut_yc`sz)S`;Y$|@=q=3z$iIDfrMs`A04?aJ+J)MN`ue)KO~;*wsJ-(71Z?y1X>M*o2PpDg zp)r#UyowVQU~6ouZ|WJibMM~J?ZLB^WmDJkh;Q4z!+ZBe>>waUHYPTx!$JpBg!~7- zDgvy82i7xP^jE;{(^1Tg9d>(j7X*ccE2~9Wx_XONdiu4uJGr|%c8m{?JuRE1ZEC8A z*&$mmoTjz4x3_h+yLgqiwlp`l2?Rcl>f#GwPyFApOB`qz7#O%SH2Ut{$ke-git0_b zcY|+F{64rKA{c^g-hdoK-PJVY9KG_IT1G$s!VM9^=enWYd8Uu)K3#-?AFQp)%FGGH z+yzl(Wh-&@+&S!m!?fY2ZR6wGTDm6ACb&8*E#(Vw;L?6dWMx|p`_l4pw^S61!W>!! z6?nk)3=9m7V4U+Wd|J$q(TM_IQAzyXeMchzh&~@|lxhOVy4ZtgqCrK6MefH~xDJD; z=wNOlhI`JPJAFb410mS><7gIl6+r>Y+Y%Bi(9BeKI(j(zj!(9IYFenJYiv=Z8);ky zjRZI|aGtfSxV#(&Zuar%W-wKum_M0KS-GMdADQ?LEv1 z+Z3>QLjXD~Kr-eL(*~YC z*VRbJ?zE}qa#PY$b22j0IpMn#%J?ED4{yhgXPx7t%7K9kc11>&#l)1HXll9=$6-m$ z*5g%`WBK?vXv`F!!7gdU5nj^(;D+vuFnDi1O@Q!|`o9(}Ve~7hh@lwf1P35MHUxxm zkgN%i0;C3jLR`gRSfZ*z$RwBnN--!RXU{YSGV(#YwDc@yW#lC1#YHAKc-wmnPqaP# zB_KQu&-uj0#^uH5#$_gkq-4s9%j*`F`*^vVsVmBeiO*0xfobcyu7RP!!J#4GjXwn% z*2E`^S&PgWKFsaz+P!aYMA(+iL=}v07z4uriv)to8Ue4gg2$_@s=~A){+-ywF$t!p zyAjWkF?-h3q^zu*tgQUp+}vzT8wNW#Irxq}>3kCzi05U(!$Y}g$;nAcNti@Dkiq&! zLQz-SaG?x6C?GDTaJ8|q0sq?(X2JR1(75iWzn=Yl{9oqw4BxThqL@8!!H6)53+0Uw zKZW7AgVr2f9^h69uL;7t7`4)?!5pDGx-m398Y|BA}k&Lhcm^4x!Jh~b8|Bzo$O)Wu}_hK z+|XD?y4>8n-27a|MYEDriZ7^tL)%_)9BiRWjj$1_7f)j~@^8P$P|0y$>gfIL}VaNzY1$^O5^yN9d@V zFLE54=zO|wGoHv}7UJemLBW-Rqxo4$SxIS?9T;oEvor)aL+9%CrW*r;kNXBYgil9D z$I+CH1M&Um`-_~&zO0#SHpYQ4A1LU&QB?@-S+`*jHH9 z)ph>y=qN0F8b=9ddiKG-NPW}R&CZ5-vvc(q;hL~>d~)n{U}!9cwc@#6wG&aad7a$;o11_ffO9m0)p??7cT(_`(|VWe1}^jnvcTIl@U`sb7!Qf zvbLk9uYdIE__L<~9DVxNmk0JZ3nRXTSc-~@3W{W8aq*c(yb9YwTia;nX%I7%4l*$G ztD_;$?t#9(J}Pktk)E?Ba8{C&m63|f0=oQs+$!hoJ6T)Xgya=Q{8$T)bFAW0}$7 z#fulR0Vu&X;Fa1EppA85QA|-KW{r83{BmYewywK-ptl!Y>Ul&5b|EJ?+_aq3jEwAq z(|8B7vywwN;d}S}^7~0VcZuiQko(BS8CkhmM_;`C_=18sDM@MuPF$1}X5m9sah9UG zhQllcEt6V7$0#z()7S5wKKaqy33$Y(sj+y8Z>J00@~8t)Tuuu^RHe3FfW$~mX=!08 z@c5`6T~M#Sx33#>s3ac_v(A=;ane(>(z9|89zL9Z^yp!PCpRK!E5@k8@E|Y1{xL6; znxDUX`vMV?m6RbTCM7M0r$)52)D4Ul(FvxL_eyiUQsL;cPZPL!a>J?mDx7r^-(rnr zUJt9SaS3l{tu7-jCZk=+he-kE1r-a+3V8x*p-DgLF?!KOcO!hkcjoM`96E_j&pLP% z7q(Z9!2h^mL3r+t%fWM%Ng25yq^}HAHdMg;E4UJZfEihv#idzF^iYW5B1;S=;Le1O zrXQA;c0Qf>WcV+2RE|}v{QcK3eAc4L)k|^xZf9p_ttcfXY133u%E$OFoUWKxfoCmh zL^wRFJ5$#^h}`nHw~o4K)ZlYx&h8FD-a}%}KXUEG+qW;E4R-(ZASFK1GPt?9hzl$b z!U2=ug7`~E@olJtl&q4un0b6m)}V{dx@k0*aTdRSC5GV!VQUmEybc%T2Yes*@= zOP4JJosYY%hP3!hUSrvDJ|DVa#ICB)rjTD#DVWx8aP;xm`2X|18*ckg) zuY2^zAAdZ0RBO{Q{^>7sM!r>RzUpUZz0`V{-7-5o)M96)D6UvoS$VvSUj{r>jG}0- z+G?CnA$+ktcsx4xxVN_tNpx@!?Lk90%`zZ($@M>eJc1|w=)u`!Bpq60Su_NU?`05S zQvQpNAKw0YKTyXF=LE*jy>+K9~gcAVf^u(o*TEhxC*7dh4{V@ zUuwv-bYxyi%BXi(gb5D>;T8NfWa<1(QY@u;YEh;RF7DobxcGVqz7OE@cjk{h`7~;7 zz6$pBT;osqW!aKt%a$&)wYDp^HBge3l`E^Mtu5u(R+d-c>8;`-el1w}h!3n2wAw_^N(NtetDE0MWucP+JO&T=mv9mL31#~*+H`RJklx@zr}51)M+#U#k8)&8s3fX~bhPofm#fteVEnKXea zTZn^XH-0T{2GQ>|mckdohwm|_-Ox=pm_3j2K-K8r?SWVE9HZA{`v1KSp@~5(z5fwhharuk)QuC zqT@5n>%V5r!&Mp@&YcsVz6{%YdNTS|+&h2w;@z8PyGnM=rO|qpaZ8N|qSXooNXdK3 zYLAz?c%eriK=h}By*Mi$Xrj$(&z(5B?EcF4@h~!BGA9k6@ICsU)dpTGSN2BxwyF@2T{<Z_aC4yNOfgy(St&M7B?Vr#R;4waCwA`Gzwg0)J_JOURa#V9#q*jR>l=OjxNofK z{8cU|BQ<9~6_BIPj~vX-$xh?o1IndmWK!-se1(~EIC|yfHFQ?!O~FUyH#a{>N>*7# zGuqb6%hPx5YSF`Ie_|Nm(VDjQ)$Jau?9IPJ1)-ZpKj>F^4<|K#0_me+5+!Qx2%RZ-0f6i4F^SF#uE6Dr#nh?s(R*ZS88LzrR2H`J{dI>dtmQ zr$i;V4-5t6E2ZX<4qZtW6@RgSr+Pbu#+=+{(ki_5bySef4V1$dKufWm0 zX0p0^<&!af+1?NurNJlkJ9y-1R%-U)Q0&y3sc4$n+F|O%cWoOS5cT89y7p5S)~$K?`FHC&kRG_B|&o|;Z zkSN%fXXj;G6SpHZF)=aZr(fu)PX{+gZwE&!N73+DtzfLCG9ob%lW-WdKmk5@^vJ=i z)T0rh$*66a8JXEYL|2%bPfteU;aOC_mjwvhuNvltBF`!jpF4``T0hYmhHu@vb{Kfw zBY*$ZZL3$QYuK+KzKXlIZ=S_N@MobQBcQS>Ze@79LZ33+6(*8`A#rN6%nfHbST1z; z<#&#a_I1?q_hOD3;*oqgNF)ccaUqX`j$|ai^z_`!>6SE~+J=v?@t2PuuViHvJU?>u zARI6^6f?u~FbQdA4M6Be3Hr|`kJh!fx3BrrpBmFgPjLpj)REB-Xt)`NeS7MPiz5SN zWqF-7ExbbCxE;8pBLV4ao0cMO@V#3EHDeQFj}sy|i5Rm@$;qJd%dFIbqakU@X~~c; zlcEFl4f+9$EIg&|xIr6^DEGB#b^!DRlZ(pEqe*5ux0Wu(xO?F07ZU&wplAEV#L}OXd zZ}sZ-cFawzyZCVRLo`{)(d!<8@7ZuiC-{m^*L4jJbYY0Iv9Ty}HpaAP%R#_OUfB+! zg9kGD;oFGgrLF=#E?q{OxS0_tDTz5bC?Aww@PfM_KFIlVzI$C%RL^iswMz9;v!N5_F&`RAOhsoj2 z$A&LPdq9TlbMO+NcZrM0%*4hLcuYmW_VUP)oKWIRgNZXye$z7OfpXM1oCh*# zZ@N>(FOo8(q~Ls-+S=Mn$iBpfx&{H;RwHf^8c#??B%9SDiVxa(*b$)JViq0*VU~oH z&OqO8qQjE}|681pxKbCv*jRsjT0|x@$c3#riI;!$`BC%*7>)xR)PsCDkwFng-%NPe zf-tYx$R*`!eyhkI1tQ9s~>)0_~J5ilv~(%RNmpJfJ%7aLev<4AzwmjQ%^E1=|>hwIioe28CQXoX)+ z{`Zf4%bR^{DVEI^;;mi8@lHm%d50N5D#2J_rT><>l@E{AM`Y%3m^r=FbSQ|0I)ag| zOtjNzUEqMgOG{&Rz6@b5cIdQQO1e}IzSFICORX0zq9Y4?azM-+tzNyBc0>S!FX9&% z3Mm(~w*EIhT3cJoi+z^aHIIp`7P1KtH(y5&WD*%xPU26*2hzREc{O9banpF1MQ0A~ zi7*YhB{PMxA4M>U$2i}#ey}YXgWTLpt>vw)r%qqI*y3YnWwl6S(IWd*G?&`8dd1SE zo*<=I#`v432ftj{(%tfpeyuQYYq{N0JJIJ)V>Sec!z{TY2Q!gF4lsNSCSEvYPJD7e zW zgYY!Z%En=p-BLqE7F%v1Kp`b9cY8-)Z|HY=n$M@aytTNzwW`%_nYEX@|D(^7d^1Hj zq1a5kiA~}GEC@vYmzaoInbZU$@21WZiK)p+h>$F%MNLaaG$XyFtoOkbj9TO%`4J>@aF7Np zE@NNrw1P<0NqIeBYdr_Zi!kqb$anhm`TqV>&5GYJBa}Ff#$<{Q9>H*TT!E*Pnp;kP z^}lkvassTw;G6MZ*LDr zFM+S$KlU}Vv!m;}@~ZL}*~mg$0G9jsqDl5v$1}NNkq1I{{&awGKgPfyOv(Jkxn{C+ z-+t^aGm?{%bCQ#BB!pa@jQ#};7F7=lVj?6pQ8UN|uXeYReaW<^`oRb5c7wD3)G1p@ z9DFl?Mk{=MJbm0TZi%6!uknGLhm#>3a+GYItx{y`=DaM@4yyM;vM;lYf0n?BLX__mU!=P;ILuSpq~TOb_1 zpdg^8?b{8;-u}}*3#G)r!CQ9CkhH?QnU9CN586z=pc#La@*h1OWQ+FzytHTgoLz;s zG+rhU3_tt)Y1l@K#_$s&A{g_grtVMLzaP`TnK^q)YoGMN12IUAAs@Wo92qzn@0mt) zRNt5jH*RjyG$D56$6Aps$g&i=7lww;4}tb{Z_nxe{+4E=S!~=Lh|QSk=;^z{8>7;A zvdfne4Al>VqGg50j{WxA<;$01HwDBLy7>5%HZ1;(qE@ zF_@PVk@E|Gc)W>AfDkSdWtYb0@#qG+7j)2>Xs_vP9LLY0WZvA}$ExaDdf{sqPn|x0 z;R5JD*wTXA3h?!}_*iS;4ohstw-`IZtvcBJ@OT#lB)*d0{#lnVWo+72RB8(k1mOJ- ze}Cz8)RvMm;~zgvxrJ70(teCK<|L<;iJpw@BR&oXW$i#t3VM5zFNF&M>EIq4IWDd) zftY`&1m|O|Exi}|#x7jEc;VuOAqY4`#y$n}B7y~c7c0DzgqR{6504fC4MT+(l40~K z{_VG0*DwF}8{XCIw@X>uV~WVa02Ds_^TU{r?JSmB+3~~K`}b$<&)E+LOijX9YHGZ9 z?UUa#$l;PxG7r#>2&A}%OG9wL@qk7zkTCbqrI;8zD&7JRZt*u>E%Z*1gxS?%p~SilI|43g?!p=7$e!$^};Q zH%8X(JFp)sXMZX#ndvJjiId=Z{}(bZ*%Wwm@<-bvF4UvAWf<{I-k!+F=$PWF*6ve% zBV$h|{`~ZGbd2Qd?{01ZGvN`Sz{O~$INN^33U41@%shJIA^P&^{8xha`n&$yZ@1sP z|MK?U<-FOuFug^9&CNn#GeTK)j&d1}_8{K={Saj$3an2!;|JkfBe5cuA(d=Wc;rLco;aun}|-`zV+LsJpqAb z{6a>-s@9hB$|yAb?BhohNj_TtHF0PXa!OhfG9II04pK`7Z7p$r#S~uzv6S}xGG|j= zVF0szJTFWkf8|4Z!Q1`e9a!JIzH{r=p}?S^=*mjeIUinGO!%hl zVPWx++Y$;=8TAmvFfnYKiVF>rE-3@<$DEfkd6{-@sJ^)w8L?Lf8cQNgoLy{mZ99Bg zTFUz;#zrUJ)O1dK_;Y-O(}uXi&t;uZ3+sDEGvuD!MNqNO?YZEEC_rtm50Fx^|JP3v%>^&DB!pmoFtSAk_~HG zJ|=cE4&A|9-qx33Zd_N9%yVlZl zsnbTVuh?ikQV^7G{(Q zw4#a{Z{H~h#cAsP{UQ7JC*|$lmj)G)RPeMUotQGxF(PK>a=C}5zI?))^^Q*sHq~ou z6&3NShMo>xuyLqN%jd$++``U@!d6}8HdHYI)7ls<+w`1%E zofGjfC*pV^M@)uzct^pBiHSGkj~@?Knt-o$bbS0%O*x(^Yi;g3)$gEK$m287f$%`v z0P(1%G$*L3M!BGYLT7;0-NM9gVCU`Yd|i3Rsg7tlcA=jk!1F_B2wQeXV%F2y(W@N2 zJvC!Yf3Ph+b`PUgJU2ETSoFcH*x2xxilM2IkwHAvU5WHKg|~bD_~p&px38{M@M?NT z?(9R!(_7Iym^f@GAY8rQU&%Kcmn#vx>3p{Xq z{LQDbg$gbsqcuW1-;SEf%6P`PcSRQ2tndLH^gG=@KxMdB7!x0_XXM~SZ$U+yOIVod z8;KSV!xAF2%ge(Tv2r6y`iDkNMj*))Rg~2a!n~Mld<`2^mCa(8lfBo+GefuI!T|7K}eEiVdqnTy=FMMy@-k*N@>F@!1`H8;$y7r#@{XZvv zruEA&znuKf|JIBDJb!-j`N>~SUb%AZ+La@}V)OuCCx0#2x9{*zznpyj`|tnfzw7^E zeXsh%ef-An^uPM)C;adBMf|kw=O2EsbX&gscvLNEb0GDkwUk zS2ZXiDr!JfEaSwEWq3cn`v=Z`&OT?IwbxqLKhTf9F8MTY68P~yKo0;&0H6W@rT}0K z0j#hvM+n3N0&&HloHQ}+mg;mj^YsBH0dRN>0u@Wb$B{`P8iY+2YeH$7kuIh?5U3qG znt2G!0j)K=Rn>M_=L{rAe{*17Tg<^Lfq7lAnU_QNHE+-BPR+TJmDIBFP=DIN{=9>-%?B@@I5@y7 zz^WAC)kRv`RVwP$B&}maLbZ-bG1<7xR=3v7w9LV*Wexe7wqA>>Mzg-@O?~4l7W!>w z=IzeZZcFnXC(AA;r*4<Qn+1b7Og$Tur$~2 zYD8eyuCO!PlLvM6`wdKo%?$=@%m;0)MlH+-9jzvutjAm|#$22p&@CUjIo`3gz31jL z<83|b?{ase!vx1k5$QA?891F4@i2GCljJzjNq2E6{aCYSdxf*K-Myg3uk3hm@$p@S zEdlxMF$LX0`Pbu4wE9<_kE*#ETzxG@bR)Ik=Dw;MJ1Q>i?yL&ztlZVo6Vluhb@fJI zr*vb-^_?aCG1bE{Rl^%a1L*}r`%ey~pB&y_H?{pje`xz~Y|Dd$tAnA}$D@0vVs1@^ zwvMN^j_*JJV0-s?>b3FxT{CIdruVl$*e{*WoGhb{cDs$2Z=5RKGj=6-{9@MFfamCF z(8xsW$o;rUdC2g@j=?+oh99JkJjk7S^;h`~QBQ5fg|5;wjpwRI3d%+*PToC#eXOAS zVL{JKb;n(C+jMu&OzVxu*W2&4-B`HX{dDx|)4M${?%k^?ly_9#xz;>zrfKMoXy`%Z z;B3p#Z1>%<%fm0Pjx3xSc{(!u{NdE2@zIx~V+*rWuOHr9dfC)AXalT%|9=+%^a}9! zYu^J@Szll&zP|?EBIz$c{+2#LmPgkWulZlvHpInqBjw7uzMYTCqQ^FL)H)yf-m%Fn z)#_AV=5Ud=*@mO!hRo|(3D?gu_$#`PrzLR@$MgzWJl<)VkVy zeT|WKD%xw4Xr=EK+v7YA{CNHN%DR8g?3i2-K@NSxL|LUw*S$@STqc-$R-}x~oI{lx z#tmteJMP%^+~fHz#|Kv)?M^II52?gxXx%6~<9guZ=wolcGCh|gKiHo?nM`+V>MdFM zv`}U9Sjv9A`Ry2gZ&-{ef8ex`EBsaB=u~gdI^1Ic`Cnj7upzY+@X^aaDGKZZWz_C z@GvQBdb_;uZvHaqr_t`0@=s8UHgsSZ{kkAK*sej8jkDM*GD7NRPwxpduMrqGSKkzC zpRpg&+geg9{c1mgwVRf}h)hQES(}6Jdd`v$Z@-Sps`Y6oNILW?naULs&}4I!VUsW` z=Nw*w$H@cx%00hjx|FXy2WA(ibS%!d7uymR_HJguR`VWRQEcZXVbAjP2L+tVjWySk^EEN>oG=dbk7#2vficzy{I zXk18#78=%8^Cs=3i{bgYmpXOcQ!bTFz8lTgbNH!$Z}!T)^)!w2F#0?L3p1}i%$(Tu z`opmxYMa8iWVV0NA%v)r7!gl>a^JzAhUH&6xiCE1?~l@xhYN^-a|d4RzcOl#GoR`> z?cyZ2(Fk?AyJ(+(LQ!zBNjFnG#l^%8M3g!oZ{6cZ0SC|e{o(b#E--4xE)2KX=`atx zHhnPn$}YD1hA-3LzqCyilSbt!gZ-KoG|0R4;YC{;Uy?^>`)r4e$`U^qllvL@wEXZQ z0~&YdtuOkvNBfG|N@l3SZTP^pWEh$wL7rtZ)obM)XPn<}Ub!q6e4D=J`EgIV%GLm5 z?bkA7dZ`zlO&lQ4(0pAwxbf6#m?axh=v3`RbgZo~mc@x&0ArPO)r1gJ(7$SK z)&X0c=|0_kYCJ`qXOUAGhX~V>Dg}5Ji?;@ZruS6~EzdB@_Ojk;jZjdoZllE!qP^!l~CXmY0i2o@tpM0aSkpnfC`UhtO@RJQ{3!GcMN&^D+;B%!B zsz;SmVY6J7B;FR31Feyg#8QD2?s)$H`?o5$}1P!+5Mu#$Xk2qN;- zi90RAt5Y`AO8lH!?Mqi;_z|C5k=v>+p{9?1SKk+^W1FgmjgZ$vP!tB-BN?-d(X73K z*t)_tMeE)QCkB5zTa4^O1C@?yi})I&%e4=E82u_pI@iU`OF(W^AextbR7pMIdrM&2 zl|HD6={~P*@~WM<&71>SE#{ujn4}OQ1VUy{{RC66aSYz+JaW-*WJS~OXU_vYeabWF zChFQ!a78~mEp}7)V^XtHhf1LV&<=@uIXUA`QP8lYpGs_T%P8>rVDBZWCK`C>xDIL0 z>20ry-oMS;BFamkgLg#a$_CAPQyYj4FZDjKN8F~l1jE9Y9=(o3)#JbAiA!(X!(^Kw z0hF`F>mj)R$)K7ark&TmSu;6%K7Zm@xN4>iOkGnvKnr0!|!axANB*TOP$26KHrIyv%>q|}}Y*!45 zZ%uw&qx(fP;vCD z{dS`b@_wl|!}NGE$~`fK)UzUp{>S)ZsSVe@e2D+~ajQZUii zS}&ZEdJh*dH%d+0eqCw7`{a2Msuez}=4)}!(@hLlmQZ#A4irXaASJ*-E)9g!!N*Yt z=ZDd|r!g%o!lD8th%x!#M=zD31#;sxqd5f(^gxpR`fVglFbx2J0f2@W4!#Mx6A|aJnEJa9`g9NGloT_2%w?Q| zN|GUlTf*-SxVK6OKi3dEIZzcEKmr5Lv$!Qh^wzk8&8W0=M*eOY`Y!uXq0HXj9RuzN=ta$`CYJ%T+3BPkW?lSwh14GBM^p1t%2WM&{Y74H(RXDQ#v{1fjs~S@@0Xw5*E-pC&cII17J8rok0ofdxnUq6 zSef-cFr@!%O213)-o%3DQs9|y;YapkTV(L{M5r1YfD?gjQgqsJq$V{VhDQITeOjnM z`K++v&lM_CIg(353uR~#t+GU3A`+JdJ<7@I$_Xt%#|)*s96a=Lu;wBy$*<6`jO-j4 zX-=pzG-XvuAM-uvt8??wU^zULxFtkc9wFcTavl~Y#)K(hw|Z>5I2aFFZouMg?{pcbZrkr)`Wlzrjr8D$w zSL^Rq`<)n@)-moMj}j|z=K^suV(l2iAn5Jcmk#(I3QmJjg>VCMT>uTKb3>~nP;R#o zz;2XruE_L{`Qsilaky`=^R3>I0O1cvkbo5`j0Ox1Gt%8)opENxHvV*46#B3N8cM`< zOR>#AjFX-G-ngE*{N~KZO(~t~4i}8io_vY^dcd^^MAx_D>s^yp0&6259Dh~cRL?5U zy;gxDLNwS=I{<$5Ej$Q7Fxlt-x8!^UD8Di0u64tO+Qvya}Sd8L~(DXogdH7^DJ9lYrKrszruKE%YlhgKV7ReO>OHKsvbWzt|4qJ;ssB0}j5 zL<;UwEC&%xK|}+Wyk*-D^y6R$#AF>TX zyaf(4Luh~{fI)vcX}=N=a)ZIs9C$r&vQvqCd#!t6(`p51xAUFYw1V}gvZ`@i4OoXb z#PPtJR`tcvd5!o|;aT`inA9CgSN?tNmo)V^JS_ncOS_iv^k$6w=B=IAFi)IQvc(*0 z7q}}7&Ddzek?Q{Jm11C04%)^IOsDtTVb82BLiy9+xyAVNtFX+uk^=X;--RxgHgFY4 zlT8lmZw`1^hSlHb@%w$djCez=d!xMpA4@S0Q^0I!Fh?2GO$z&8F-(C%Y@fIpEtTE+ zEyey(*(63djmU_nn)8hNv@(WO8NkYZVA2&pD0}Z)6(`2lo;0 zj4LY(>9;-N2TrgshfgKE{hmX8UAlMB>Wpr?cxR|EE%e8`o-!#W#|>sggQ&BiCUV$? zVwgK1i0zQ|$ZuX{U)%I&NC6PG)FEPs6VWWglIY$YiG4)m2>VwD5`+#?N^NT|91RAu zDCg=}@CHiYfW%(0^NM33+I8YwB?WUrPB(>-1H|FF zl^p=q7SdgTJ;(s_<}O>-B99W`Dn*1v7CsNSy|JaUKpg7Zi!N89t5_?T5->q4F69uq z%Xn*asLqX9(MS+s-r-p9r#06yC?5IP$k`Y!uj9<*e zC0b+0i?Oc&ES&~JotGy*0|+b#K>_4a@NE?ALD0`8xF11|%44rW`f2yu{7jGTlWfb{AM0?0?21A^YS-9t7MCt7KmQ2L&UP1$s z5W}vkmfm7~U{@|E`PJo@K4HoAHqwyC~*>lB<%XJ6^F=ItScp<)bo}(fI@VAw?K?eS| z;&rD4cY%#ckvt`cp;49C$0+Pds$e8TC2boU7S4euy|sBQcAQhDvG6^0+{#GL{$`zR<~F(gNf-L8@pB8Rnc{xK|T;3!enY?u!N?!|#KHX? z9Y|;wPey-6!tx$1PCP16qJ?$eg>1}jFu^FVrhPrb_t3jk*MG#I<0AF#~$&2mBnU@`!_< zkt|Q#{cQI)M3aN*rfsfg7yGhtK;OHNT1Gm0*MohFXsSs_ElKUO&vCJ7o4lT>*`(*n zI{mBBC`zPeQemQLdoXIOvVmD_-j?n-Dz5hyWm+)>UlvV*K0g2UzUAKLn+JcryUOnh zs5EXa)3a1J9eoRfsX1j*jaG$MQ`QNOo`?yp?%emYm#j|?#n^4z)N$Av)rr+q$ETTw zf370A?3|Tq-}LLKy%>9e_Soo3JyQ_e9dhK?*K-AG(QV2)3_MN6dRIF`ZDr4=z-bF( zUuF#!I(W(@dNJn8nP~h*ikGRcgQsO%M3a9p*}2Fyjc8n3NYZcb38*j$yfgREI{xA& z$E9!8f&FC(?#3;N1p2JBo?j9iSk2%@ybr3{z3snO-aF3+X(nE4#6x0tp;gowt*lKc zMP}b`AZeMRntbw>gJXjP*Flb?Jt88|mt=lW&OH{z+4KtU2z=t}W-;a)3ycqfB^n`g z%U2raawGrhJ+CqT%fr;{xVk1j)2MzELKrM?&|P{M_% zrztneEE|{Lr*=XekCW36a)IJ|Rw2V_o6beQgf-8yXpi~9cM;*w;Md$#!JRW4T48}4~$>2J{U{YlWf11+f^=I9hC-mN+wWi&Gw zUt}{H|K?V%tgrvX{-IQcKrR01o8w*Qr72ZAkN!lE*?)$7%1~&E3`EXcHz7xdeM-=b z2+L|Z8R}Q@x5g;L_3ED3AUi)gsj(R7ZzT^Y5%w#CeLW}ap*d@dwOLm6dh=4Fz

    zuH?9e?`YY++2p&CUFS~k<6O`#63<-IlW+;EGLx_LiAI=_&@zvI;LqsDmu5xhZn+Td zBO7x4KBc;QHaIIr+^6brY0xZbL4BW?0iAvXpy&$qX5}PvWw`rSA5Y`RmFaee??rvL zQr7fShwYN)i#ZAt!)3C+eY;ml-eSGV&GAyRIeWJwvX^Qlj0jzhxd@-i3DiyW`RB4D zvz6gXteic!VXj`32Du2)PBVH~EfMs}rJk?i{MX+&fzU}cLa%aR*YB594~dy*pthgj zt$^t*%TTULFV%gLK?A7_8hw~y5wTK_jb;ZOt)~u|zdMNu0s9>#aaEQs-?14V7r_2m zp|vQv>~L?m!3c}x{E>#1+xuEprHw58`BYX#=~u~M@pTv5uHdu9?&CeDv;Fce_ysi> zF!mIfG&dm~HnCxQ1H2v{2R#yORB>-p3LZ6!5m9v%?CvKcbRIypib}@Lo$6EFN4u~0 zN7h(FYtuMLfwXS#*BrEAk{!c~Lhv8et&Po{Hq6^^7EftHO#SJX155UFPp!5oe{Ey9 z$~s~L_x1GFaGpb-FUeTt^PpAbyYypE3TX*r?2%8uc_9?wQ@;up}#aF{?*O-(IDc2;=(nK%emO1w-YSy=oqpLrp z5x-17Hrl;FBG{qSQjRPdlrjs6sUSe0rJ+~~s0Jn(9VFVWbz+CsK999HpJlkKAWu~W zO-6giK{Y3AtBpWJIk@ zva*&uPtCU{c1gDQyd-4N1%Z0Ab=6~&`oY?8-5Iu5U2^W3(QNqs+RJ*EpoMA;8sk$0 zFX;-}XAQy@%_Isaa5Fhk^QkS4F002H%=PPae9-X!-&Q+o>3&oT!(Wr*8gZ;B2Z{t3 zkUU~>IJ<~+c4_T42X|};Jv>=L=ln2V6`25z#i|S%FlAZ^( zE22U5auVTcOWyzkHZ&}Uhc-)L79NzrPH5bWs$x2}BU_3yFMr>bea+>X;}2YD2V_7< zzng7fUl9cNAUi*bFRd3xLH{0~cZ}<0bz9 z9+$o8BkamRg@_v_#cd=94LyhP3tHQ6(~xT~+uq*Nu>#$ZPbmy#8Q*;T%}*Nuu ze=5oj%$exFl0jAS0m?t?DeyO{eemhETntI_2q4P7U{KU2H%AupuDX(#we^WJnb6*4^YBlD9v$8*4dN-R|d?5#dlYD z`fn`?_=4GAeZoId;79}qPc@)L02%}_VlQYl7$&K5V?e^t$UWVNY#J)xy-;VX613)ALfRa~0004o!KC~3(Ud<#^C*GTQoXIvYz8WaR**%6sU2@=e`)2< z&L_=PUSz`U*q{~}fYJfD(nmW4fCC_A39*w{5XY%b2tXv0^Y;Xx_Oc3Mb8KU~3XUrB z8Jl>>06^OVYx-=x`@gmb3Z)=2CMEMIZ))A zCa{l#FnWZ08G}302Gs{KEiyuSg&=@9m>DkcBqDaBxndu~uC9Kl9KJ)0+#*6m)(vf? zBjb7sjHV}Ubrl?Gb>Ce*ZYC3i%HSbX?sp9kuHdIG@ts9}wxVG>QAo>6o^3bqUoW5v z2&dT4orBdSmWX&s51WynqVz-fgt||{vPq5ld#q~ZSDHgipM(fp$xuojk1$u@O62dq z0h?bS_=5ssimBHu7{WlR<$3)m{yP*7qB+Qn@w%8R4VfWs2hrw^#? z)-~?z=C61%K?z$v3|re8IMTZUIxoT0zCb6sLLBR0GHn$=Pq_9=b;W_YWR|>J`|K9c zso4}5TC-8zQNW~j9&5eRLWVn#p+%H}93?WBEnLgEo_Ema{1u94Yxovw{*B4-14NWbFX|Ah;P5PJ<94&dOQ@_RRVyh!bQYd^neX}ks{N$% z=sjCG6u-n<2lAb}BW&*6C&g(lb4$X3naEGorEi6k6*Q%`p&WKL#f)!H?sBQR!K7mL zLiL}7!|^&WeGO=WBGib)w+CDHXIq?kEIGdy9t;DKd4M*^g|edt-#cU2$c%>O6j}Iz z(eORp1s_-DCU!v|9+9B_VhKg=4@2be8&j~@tl_otXs5K{@#$#CL3lV#iq&?Bo(dec z)E@ohx7*{v&Zmet3ZKS_IjhmgRJ3ev(^@rp78raAnMYZYXUh-=fhoUj{JK&LZ(>=i zXq`_Q+$Rly$ofcht`-^+jt6W?Vt0UuxIAGJs25lNB;+*e5c&SbZ&6|2P#fa_hHG>v z8R0JR+>pn2Veo5@N7sJsvHp)2cPk`4ii|yg-wB_IAR{6rJ(E3k2;V!Ol1cUej7Ht$ zRf%~#NAM%V17v(x1)q`zE&rOow^f+446`F%QrpUR?}mAR0uK({BS65T2v&SJAOr+S z-2&FCXB`05CUP;vA?rFY8jO#lXs2*A4?PPzuynU1u}PuXpd$hH4+_E=8(oyJAaRHb z6-Ir=Te}2xisL&-L%N&p;iTY3Is)4!Ui1D+Hae9z*w+u zJA7+}=c+C>;U;{a0X6DI)) za?hKK5zp%q*DC-O2A3q^-{nEZVKXpXel!{a%L5D)lPs~&{RF}Sg-D|z+|ev)~joeXeLz}B~N%>iK~1Cgk> zBodFr&lbd?AsU=|9hrbsT^m;20Sy)=$PmU7z_4|zg>0)u+GZm?oM#sd0!m&Wf z#HIYLvV3jGM&%-M%SthTndN(MqGPl8!AS}ERnP5a7j-qbIGDrWyZ)L;Fz5j;*wMt->P~ZgNUyd zuDEw1igKYwL@or)jb^>c+_fW)df|5In?19!KEwHMiiH_+mzvO10J#j&yC4qNB^_y`m;C= z(t{>)A@k|8?_2`-#PXzHIXN1CeeG`IN376=ajoLiox(^vA;e~8OTa>0Crw#{+@cVM z0qJ%$2t`&L7SB_j;eBaXwVENi43J2H8k|C#rSZ%Hpqsjbvz1%Sly8F-0xdSANcQhk zOho{4W+QP&GU$7hUc4KG>W~3A^|PD&d*#5s%r`K1a;j%F%rg$LgM|zrHqPquJ=lKJ zZx`+8eBXlo8rLTsj&m{f3FT7<K%E8l_vhUFT6bL?I;r zfQkXw%+Ir^gX^ndE0TLK2MXUq4)a`2Jf>;7;|NSGI7h>9Da7ETBfxi1W`&gbxi7<` zCl6jQyz{@e2$LA`-w0%eG%Z{KVx?f$7M?jn_@jas&v?z^pDBM2qFejn6rSmFkvWTJ zEgD%R9(##M78+tMnKe{E^Z~?1G*?M6aJfb*(nMHr-nx1fSOh>3WDuzUNGymOjlC8w za?N}#Hge3rqaTnZ@7Ofk%#yfdJgK&ie7#V!R_A8Uix8}PG71`H^|+iw$tzkH_-C(!_-sOx0hycv_SwiSGwW~ zIfl1TBU5<9K*cBAfz7>x_w8=U118sw&5`uZyIo}iP!m&#P$S76g6(Xl z2(juKrpf{P=dCGl1dcQXx9e#%9=GX%N1mYfiJFQC4fx-I7V3>k9?ni7gG{3L)&(r zr-A2gd@fq+9Jp13ElMTsH8WQ^c#uJNkG#T8311+-IuwlMmBM_@`g8rt}fk$Lcer~eBk`zp$r`|sU zW+BSh;H7Zy(-VI+EQw_RjL6Z0YcT*W%#ibGWmEl5ajAAH7vA84%syG~_w;G3(+}k_n|;I34IHT5 zU;&n{?PO@lxH)~X_)08nY* z&0+Zf(N#dyJ~--4?h~y)Ja0_7+@wvZ%Ad}ek2wDrO1r)qn2eIZ&yj~RGq0$hSca0F ze-5pAQ=pNACXh5JAi7fQ_r}Ky6D+DD9cK%S^^DNIR4DcHeF3CsXZBq$p#|YMs7~xl zb6514F}<+In?HgIB$oYGLmF5#%LRKA)gy8J_^jwF#uEVPeZ=~D!M1fq_ zSQ>r|M0sRb#;r{=JzUMK2nfD0i(Sncwt*ei?E1=>-mVmTePrmlp5h217rKJ1W)N$^ zqDZG?v>&ih7uNxQMYU*+6lKL;q&$t3^lNp~eMvbJ2^3Q61)3`# z+!`HG6my(srg1Jj^e}fz+R^YetNB#iVG@rsA5<4g>le!t6-Jcgt5GawL=86P$;^W8 z!zrXzGXti+L_ss-{waWLD}D!>SRtcFviq2XP~O(5Yhoc33Os{wlJPFD=eIW()T`L1 z5Pdra-M{t`WR+{iWPj2!B5W(a*lIzm8Ro&k^AXE6-C9qV@3{yw6eSg{ zlY0@eSq1xJtz`+0G^8D8epo&Cl{dOiaW&G<#!SPVLmD>IPC%-dJ#u+3;E|n7-!I zf2l>B=8h^4v=2?HR!zA}B|{zuh@ht`l!`HL_a_^BdZxbgmF*%W&AL*?3!0QFSsZWu z5A|OHjlE?XU^j$rk`o}!~4ZpbMYqu@p{9O#~uS(QD zC&?fxX&{0o;i5<&qGnX^V)1=ZjC}tZX=`q&$fzV`)aTJzN?Jwv(vpJ8~bf%>))%8sZ;<$WFR>Zq&xx5 z^D0aCGyd=#W7TgAo?bug?MQs=ziIGEH2D8%T2Y@~2Z&4qYdH*9o|buU{I*c-AEA>& zYGI1ye(SD5Du=034VH%(sa8MWI`_StdT~hwVrTG_qhzV<4xWmlm?~)6hFcBmQM+YCj_B=_hA>bS01{ne1Z zVzh>s^7Z(+RARpom1!Ks6yNf8_vojT4EtqGKT(Usj`n%3m*Hkj5RKrfy$BJ=%o3Su zH{d_|`mGo9+eQcNXpx7n8mq|wY``nh4TiV+Q``H7|2Zew>2NRGR*T6)Bnflvla=j} zb+eIF2&M$UwAMSm21wPWtGo5TRy?9;rsAu=tzKV(GXo*m`j1*l^StR3iNe&0@BZhE znGMv0Go6N>d0Zt%I?3RJfNB>5J18?_$^QS1r_WPm@FU@RM;`jb#y^fd!L-hX;yE&y z6Nu~p{^>qDHhtD2%}Bjvm;MwyQ& zU*nA9n2ufEj&VGj3#ETue&P`iGAmhdq8FY4AXX==Mb_5j7cT&jRt!L7X1~W&MpD0TCQW@Y zEeYi1y({VjnH2!b_INn2luY{9PfAxbH~0X2+?a=mJEkp+B3?C8m_?B z6>_v>xWpG*haLsV`V~t|^~(Z&zomr|vKpma+35$MXhhhM?8*#7WjS4ioa8E8UE3=g zjmhBlH=J3lL3r&;(S$bF6FZW{nZoWgs|X3cv*b;j5KwVt(C0$D=BlYRf@@HLgHdo7I)uHn zdAS)y0mrgs1<%uQtpH92PRxK;c&)#G&eb&3cIBhp8Bs)8bix6hxa^Nj1t*G^JLgr#?|Tvz>IQr=DtQlGePhW@F8uq-3w*bz8(-5+FfgJ9mKvZ+c<10z{){#JoUxz*#U z+jyRFo#N3ZrU{Knyya!vG~9OtvgY_}SPlanVuPKAs5-@9=`wiKD=I^)_O{R3R?DHd zn%^CR_IsEX(+oms;^}^HYL>CO9oR`OR?c0%#=y%!h0C@*ziP&!%DQP@gDn&scahJ|SsvYjPIPCAnWiBd5Hoo;Gex0}U%nGeE$^Vd~yF6Kn+3XV z$i{VcsVKQBHv|NUazdnY6O=^%o^XS0U(N8P=UX4MIh zlIx%c`-5PDm!--2s(l}CN7_m=p;OMlu+h1`klUhRyUVZcs&_Y3vn;>*!@>1LO<{IVfNT_T#Qr~(||!Dp^3 zchrLmQC)+PdyFIm@kkVFnF)*Yt2`D zot!FPQ+tCaov9spve~*j>iO+(3kf(Ic9~ZV>=_1eG8?=S5~HP7@TtqmY3{5MM@5Dqe; zLvnvP~HjGK;#!9kPWDJ~?ab2&}`iG406*PcwRMS4$Ts+_WPDm0l z(IRzdZ!$SbKmu8K&`H3Dx0U)y@2ZlaHAmi zH^7UuSDn6gxT{R-*yqtd`)vR0nkq%5S+_ zWk|UfHjTma0ZM+zsEJ#uwr{sK{VeGBsd|>*f#FyjmhBAtZ0Q9C7Xy1E7$#quBe*gSjh)^n` zWqwjrk}cF#%@9#4q-eR`ci#6OIOjRfbDqyR-_NG|RbA3tA(J_G&ZF(Wm$;jCFWC`= zZbo##NE2XEW7S)Dm$loKhhJe}@dnE{E+5~!WS*N^YkK8~GtfCOaCm;n-pXUG;IH!t}^0%?>xB4F*k$e zFDY$p-XR@7a+;mLKr#1ubWz9kj+AuS5jlBTpE-GWp!TUHI*&OfNjm{K&Xal=+7+@rj6@Eux0Wj9wDfHCab$%?0i4 zGUCqu*8frCq*Hy1$2Mk(y7+qG=`cjHtfRA4quoi5Yg69C!-Ai0--iVpNvTikx;xgY z{;N|X;TBE_R9|322G(TE!syQjJKWEkXUkxk!p^sa7`8B70_pm#g}756yYbq3vbIt~ zVULn{=w9gB5&k;YsxOOoj*^Epz|M)yiDlEvvA5m0Bj?Qs2ya47<54$Nj}DWvfEPc1 zsRyOR=r%dGeT#bHbkf@luYZFP<1Xx_0;c<{58(qNb5U}9?8-hfO<=uQR3w<=L7!TdQwj*t42B4&mDM%_;f|R>B%U-8~}`%mU`VqW)FqTHlFdhzIO?5 zVlRx>Lg?*M!RtBa7?_jNy-ug&DumHi#E}xC0P`GmU`+yptI?f#*+NhTI}MID@>@w5 zF?anR)%(#i5bE5zx3>wc{5&cKuSVs@$@nT4a4Dr$5B3K&1Yg{FXXxwYGflf56rgh{ z=Aq`hn!<{#p3gx8h`o4v6hV=uiZk8W*aD>C&eM*8HKEcjPwYLL2w4+ z)ntGo%LKY+aa?@SV;{>6-$%MPll?FKlU*FYWdsRB(T*X}03ZTjKDKp*ighTlMQ0x- zEwF&B+C6el{4-vUJ&r>gB0h^NxYYVm-T6S-?R`;_71jnx{P9<^k{ zy{uVqwDUrD$rLI|@{qi1=iqDZ+i~|d$2Z&=dE?X#y5nrSp|_|*H#}N z&3kwKd|T|ZQ>1b^m{XwJ8J@V95qrw}lvSOS)?#&Q*YTsdE~SeN?B;X+nSveB0#L+d zL>h8h&aE{+9nE4T$9YK&#KsX(aaBCp{{Bd|$b+=PFo7X!Gp!5Cz-DWVPx*_Q56vq# zriQMfwJxOjxb3)nE8ulzr)k68obl(E!(Ln@W52n2_k`;&P}1=s1T2oMZ-d@T3x z{CB?_{#QhrEM;SsPa$0MQVwoWuC?LAe1x{w(gW4gkvaKnBbPhzGBlz`giGJQKI*bN zW~Y7a1Hcf)HN&jV7N){4vQ*3oZ}57NLD))szZJ0ZRWNgiBpW z15c6Otd-L>9VICo1aRz|m8$CqJ1ZhpgsnY_q(#RZ9e?p}K)dXQPk znVL0f56ItP=S(M`+4Lx?4mN#5S>Nu@6-a`-t%>>JJa^H}KS0C^XuAQNBt^G^CUv`= zXKb3ak98Ly`^ddFf}R1K&5G~>N|mDoZD|_^7+h2l?@>{x4W$BN*HZYo3YdzytbCRA z&cT4QNUr8)7`p*E+Xw>Z=!X7l zY)4@fPi$6QI@@6lvJYI0m*ny~AtZ{~omi6UMbzxXAM~ z<^rmb2^+}=uCZLG5u}rGXe0Z{cL$j8gycvpobqydRZ}85i=iw4tlsPYj zsxRo~dfpF0+w-smaYzoKQO$!If#IQLF#v15P-~#yXeP>!*ho~_2g8kgl?Ky6L{&)16o*zV?cgvc;BQNqW?jjzz z+_+3K%+ia~P_^am(5!)>&X)3Lau(7!%e*I~6t{gjJP|67kByB(7|;QT`WN7|OxTvTwjK7EPX<217dVIywCwKQ&z_y$!D&W;mJxv#+l(IOw5PgU9v zpTx&i?)n(qnnH-nRrP^YbqMENS2y%Uh__Q2*Hij!T?eu$+rly=~`qr3~&e2~DY*md&%UeN~!#jtssRd@;tCKxq4hVZ~ z2{F*#C6?2y$oN(t(%6TtZe*-9wSj;g(uwrg@1d1518vi~gP5C)(B|$Ep?ltT?H9V! zUbo~Q?{j93*=D`!t6S@Q9VtPIW$F0r3bdA8hAH#>qUy;-egrsqXv{^u;496(ZPmUv zbnT&@?XynP z;e>27n2>;8HKWGN-lo~x|Udfzk73~o?xMtxPz9P(SN48{;_4Z#+jJ`5jK=Jk7E8TIcRwImm$LgbiuMc z-Mg|6&JeC7Z$lXH5QZ^pEe}+dVpQWmq!$mVY_9NNp%UasM+uf7opLUqed05JNSVug z#)MSI7{Z^Gl70zEECG=!z`j>W4BtnY1av1Mn)0K2_riejW20*tK(w2uEv(npWY$VL zTim1F^?3U+XnE=JoOM3TKiUE}fIxY>#y0~FviG$BomCEmE3a5w%9qW(|;+dH8vG-fhorP^uLoaJ*ehwg$B9FFU%{RfwAo)ogZnxX|&C z+nl@}Sm$>wA|G*JZwALNe+Gu+NamK~E-tmC9J@$Evw#R5eV(oN31alIDLmkha3Qwe z2XD;&JRxP64lRiqS2g?O{O%cZ9;iIrCAKteBPBJ)- zb+*<7&y=M6@Jvw$l>{#J6QAA<=%g#BeKu;X)(6**AsMhgUt=?7`Q(@a)P4fS=!mhQuQN8NvWW@HwNTLf~k#xuc;)-JIcJEBKI`v9bzcuZ-HQ z&?*#YC9{yBa+O&SH!jDfKb;aoIxT$0TLI%e-}a-FxeD3-C(ttn)RJ0>R1xu|OlUmR zR>N-_7-AKDv0z$p^q1_h*ErKdw89d0Q6L3%uJXRjgC;JPKWY>@lS?{k*BP@)kJm@# z#&{M)API=+aoBitdnMZv8&9hXq|t{sdI4-*D+j){gT@l22GXu!Yh_CFGbZ!-Af-G|^`?43PR9Ba#9awumR>e%SHfkngsL<2r4JzuBh zx?2@QYgFjGRWSB``C%*|kwgSF5s^`fjo(i$hgc^C>;N`}#IYM;*9&NMQjYtG zn}*f4z{8vT7ipD%(>op_aSsid?i;VuxXTVzCEFSxTJiHO+x&Mlh<3=DB3~hiKgZaDkELpaa#$g7(!} z{>A^wtUdB^fC{UtTaGLINWegZKJ)O8{n*#A#rH>lfkuljS;T;0f-_|iF2a73h^!T~ ze~!?a*n(!k*6HhPy97rQ5@jkNBBXT3l?3z^HpAMMkppc(4{f<(y`w=unc?{((1mn4 zz~VXI@-}GyaH!58K>w>h8n(;aX6iOLH6j1*xcyJ!GwiSDL2F6n;Yr`H@5{nZ21l_4 zc5F6rR4MC#2wQHn6nV&7Y=1!&-wKTW+hQBdwBEFeaE$K(CyX* zbVZHHqTYb}$N+Ay4bgs#Xe{_#Q%brk*O&*R8*Bxw3R=JzSkD&JABp);x~V~G(x64T zs)%^UX3R(r_6QjL0F!l^F)L*(2$G)(ypM!1UY8$i72#`V5WkEty}XnjA*NR@niOI& z3hXC2Zi4j`_N;H5hgH&JQ3msl>%ei|+F?qF9=Unnm;^g%XTNTx-@xuft`_d4jGu-j zMJV(hLVBSJ9ZO#HBQ^IcqtUI37=gAfCYVOBwVYPyakMCQqdy+y;zAB`H6@Ay&%+udaxq#<3$;1E(p(z5|Et`iYrabvSIi=l1Yd ztP`JCPJ~RJ_()k)lM-AhPs?xWA;pXdKr6GJ!i5ruH;eQ5VeLB`whl>0CQa)o;_>Cg*a=9nb& zkT{d+g?*TG>`C5~KOA;?3Fu^UI@L%8uwObV3Ep*CKqo zqU@ub1VW8+BAQTsH_vw2LfOu(9LkV#YJILyC=FWI27(`7y6kD#G68#WU;TUA|*+56GdS z(htw0?wkoHLqX3Ed@eYn+bf{=2})uQN3+EtyUwsRtbC1vm3Q8IN|3iPIBA1ccQmo$ z7F({cmpDWW#kAcUhZJ?p+BB)v*npWFBGEp0eYyNUwUUb$Dgxy z+3lPrIW!1%zqncL)JQW8qFMeBZ+uzsh)?Z;=v`6<^5x~h(WGImn!#<&Dra>QLz?f4 zC^KM+!}CvmHdXJoS2ClfI##m&6yQ~&goR=RJ3bX zl#;P;;Wd7tQZbgXFEQW$b${}{-|zqaoO3$m(B-<<=YH$tqCzS~!KhT)@eIXe%L?A#f@r@nt+cw}ts z?b|WDe0=-v!?zI)4fj8Kdx!gCc1G=pi`*3$85y=~$F72_wU}mxl>nGET|f|cPJ=`6P}b9!bwR<;v|KqhVSgYH#|HxJ`QB# zp6GsT#q1j#|~XXTYGm$ zcaPG>rp~6O&QpOqKpOq`cZ3s(@pLf~7Z(;=Ht=S6xWBxlqXO$%eQy$-@m?A z#;xiZzO#n|M2U%MX=$mcc&4Rh#2vae{O0Y`w{OSaz5DcT{2llki8d;(8Xp^d+*;b& z&gZulNBR4QMaJY87M7lZbOPV`^8*9t&z-B^9i?YzX0go9i{IGTN$48=<931MT|0Lc z9oh-)#t}I12ZW$;M?vkt>)|T1lKTGF(Cf#KAKpW?-DSMia|0)Lq^5=^fw`n40!R4v z?@vuT^!nq+ch8JFzn-Jv}>TPm$olK>dy_;c2O0EfvrJ3-qP!Pu-7i@G^m>A9hZv<{XgwR3K zv%|v=z4S1Ox;|h57pj_;2}rpQapNly#UP6T=H#z!9a)z=?4)z&cLaZ7ue z1fHYgtyQf9qoc#^rz;$}T*l&n@7x*U?%eryzPhBkv#Yy{hi56jl<&#)@bDp*tn=CzwwZ|7_b2#qQ!iPDaZib53G417DH0%OZ_L0U$}-i*D88Q?4>F)<`HH8DJm zlL)1Lr;VX6H7z_XJUs2towtu0YKuyY&2;4T+Z@@B6(7fk$3}+)z2i^DhA(t-ZAu}h zDu_Lz?p)8gM*ErK3%oo%T^v2Q9-eFu53Z+2!S(CcZ`{85`ZZ$2o!hq$`3D5Vl$TrE z;15e;!!~XS4F$M_ycB=~yuDcw zhw%8NYYJ{(zkT!8Yq<6Tv73E;{nd0&ChsHGh&zymz{Uwl z3<-f!Q%SXqa>-YTLULRpZ~viKWtDPXNwJPq6Swe!ptR@dv#|>oMxK4093SpE$F*Us z4*q~3clumUQ={ji=|8UY@bvU_wQ~hJ55AzOvFP@V+qZ7r8blx)ynX%RE?@r=UOt1Z z;#5;+Vr-g?@h)Xt_>zPq~EPhOrL9z364m%Dqg`K1gv zpo76dt?ve}9-6Hf%OzJTg|7$%{3f1^sF>c7gQQWYlw4wOV#q!Y2dYivB!aZW)THp_ zq@?5|;*FsWnF4x+V}zAdJD9~r>BJP|^P2=!y%#3NpFjWW*~IYh@VTDSQUOKa9#~s@ zJ0gdNt^D)_Zp7TL|MTlgB#9~JZr{Ff{rcd$Pv73(yOg64S;k-kIDw$CvD8ClmQu-) z%#1AJje(Yu63j^qPT8?Lg_FnuG8kQY7NSa4_;ge#m@cGl7rKgZUp;J7XS{wO}T9T3$9&9fU51;!!uI?Tl{L-dVu(|6u;1c)V zzP@|=P>6p4m(gicMdQPVRi%6jwGC0#dkzq^EXLj#ohEV;obLb5m|JpkYI=HlDhCpt zoEp9#-U`-Wbnw}1;0Aa0@A}u9VNE5Ib&JdMd z=H(_7JxCDSVu3o>Gu_d;^8kCkcmI@v||2*npJ(Hzcay&Pa zan!wg_obvH;+c}NgI)dPPlPyJ$>|4xE-eX(7U>H%#{df0;bQ-`IRd59GGe(#mK5e0yxI#S)##<(@c@m9;Nx-`;)uQuc9z z_hm(7{mvU2YX~QB$o%Q)S?S5?NlM{x($kX>R+3VQI&xWD zP%h;$GP^Y3%Q;3-1N9@7Z|6bW`2mz2r+c~)eVZB$XUd9B6A_s0Q1=c7E;G)83-<}CgN1jIB2fo|w{1TF zozlffaB}+Z4pkFvd-igYQqqzVld_=Nq;OD}1m+m-Qq$6LWdm6_7=&K&l6|%FR1>NY zQ1=JIF3LBmmw>aq-I`PilM@j&ghRM_xWM$NC;`_?0nVoM6w+LUMvNV>d3dpfLieTf zWW~j%1!e{Z2Or2Ho7=aS(Ba#ZJq}JoL-m|}Nhw)rSy@>r>1m`@L=5b5M`t(wdLJu3lcIs5V zm9>qHyZilz4}}(lO+@D4zTkcP4jlL|ZCimZ-psjbq7@d01d)=Gm63ZeIT<*Ulhcy{ zjkron%|>xT%rQX^UotY%5_7si+o`jl?~l_{YDIw#Uu~5C0lY!PMCI+=J>1!B7dtOc zo+m93Yi?L zyDR`iumdhUvf!;qt^{w2JD_AFBP}ECBB_=1N&!CMF>(uW7i<#l^$b z%Wjzq-xH;JH>1{48zQc>bg7NY{pVlD92d$-h~aPS&do{*K5$^)fqjh0B{N#xZEnFE zYK>3f>`TF-D=Q-_BPAmvD+T!X@6Sq2XV7H>8+_uwO2v1H85!A^=(kM4J9qvM=#^_> zWxLX5iGe&zR(jr&m2O^cjJPbb^JGt{6|QP?iqMtXEU^)OogB3yl};BGkv?)TJvl22 z(Ej5Lc*iNR=e1qflaiE7i6SK{B?GWvc=WPA9g!p*Wm9@aYFZ|vR-!E%4w0Rmk&$@# zVh4UrJL44RPoMIzR9BzB1ejI{9dzd{Ub%9mo7gA%yy&@jAV-|pqys?nbKELy6<3$pfSKnPiCR`PztVpL5CB=g(ifc=0m$=NdOp?^UbT5OILE8qZa0+}zlu z{8OhGY@n{u#%7_UyuQ9X3)TtVjO+I^*n)wHLAQ^yZ{OB3Xli=jhN+ySlm7I*g z3*Is^4;(#m^Za}YhJzBeV?dsL5S9$aK@X-IDTZoFB;tl*%T)VG#CutHM`oF>njxToP zkB*+(ks6Us4v~~b{*ZC_@X;4XIjM*xz{Yq5);k%{EeN9+N3fVz$`;ugKg!F>&(ze{ z*I&HE5?Uo)u4-Ssy1BU-u%17C@@VZNpj)-tn_oKR5H>cJOQl&X@Fp%U&SJ^c_gC!% zs{as10HNF9J+|)riP8S}2$Ywwv;8SVNJi$tgGY{Jg(PJqXCZ$9AFXn7DDq}xXOcHC z_C}w?H;HND;?i?8G_)b3Jv}EGP=GEA*oeF%xhVv0e=_+h^-SQc zPE^ z$+-2>h4Rv%jwL0fpdh8)R3+fWPU-W%oWbtaKL6|aUyoJ`g$1W;I{N!M>T2rh>kFb3SS$qvX>MCpIk#jhp@U11uhKK( zc(D^7;KoN9!qX#?lTk(?ry@mU62_xPQc#tolDkg11YqR8eEow-0wd3#rTb`!s9 zbbR!2LIh_YDUlQlm6D|79Sx@S4q`AxIs%t{_~o}RU*5lZ{{>&b+~Jo;jvPkN%bq34 zl2TMLU219L;#F#z6oiAf|E_25;9%=)$F{Yz zutSkt%^$5Qk3bMa+Jag$vJM_Saxf$1Xau?^;o+bzlbAz>IQ;Vcw{P!>x-YNt5Dp>a z5!oSdJVj**G?l$PdOJGPwMM!fC&^S-k)&&i$bXy?hdbE%rBtX%PAlvlDlI2pVVbqI7vj%K7} z=7w-+5kV@YEAwF9%U9pNeR=uf{g?MIaxw`R<$n|a(&Dmn2prVv2Ig8Aa8K5@v|m`e z`r(sDt5z=fX_1Son`imGJNNFLzuPz1T~|{O8>p-x3vgVnjkQyCRXlo`p(h_y^BfGh ze6E9IslayG(EaMsq5Jo%oBHGTF_k8MW#-`{M-FCY9iTNB`kd(*$gP<$xhwG2FYm8h zdH??XOv|t(P03WyV zdw0*@z1MfEue+--Hqu{8T($ygb+@)Cu4+56ZR_4W5AO4dtsSko+~R`b3amdd8IjNB_%;HX!QUU_xx%HfQ|;0(}^BC-z$ zh)XFcYs8@Y3gT7?A3l5j`Rmt5tD)5v*Oki_{j^}wvXwq=KHeqw?%wUYcen3mSAA^c zTqy}r`KqdN9?zkeS5;dRw=MPlgK9^s;$m)DMMXs!msk8?pnrIHpnssD;mpph=6%LV`cjYCb$KlI)c`&xa&?xh1fD4h3o};8;YUP3kg!gKn zhkyO`&p&@nAi}NkUb$?+0uZ+hHSwxdC+{&1ai*)TC`y?nE-p5&r%G7OW0zM~Rdg0@ zJ8{3d7{qb86%{oVHJt)MXGaaBqpP#CyB>=}DmF8Z!Yf}K%*aaTaKcdlFrCiS{n>|) z=3U7<%J>0n4JMZb<2;NdHo&nIHKL5H9NoRVy}e;_&%gfj7e(P!Zi^Ny_(^@){Ys{~ zD}%xParf4lj-trfz$VTzYN`?*=kclq{ECi_T_x4WiyhsIfvtit_4W7Ec6RnPz`MJ< z@5G~Mq7V#l-@fD`)h3}Q26Rk+GYt_Y@9;rjJBTtfBl{pKr;H=-Umb+ohD*pQsYV%D z*txp_+*m8=U0zT3JKh53c_d4p6M!xlok_1LBfjdsTKlTb$MAu zP1muq>hcmUmj|WR)YNu#^*`?G?&yDv%A~)$Z#W*r{RiAPH1U#>!T=4Sj#=6uw*uGU z!`V>if8@p2f39TY<%LK{A@>_OI=Xuby?urN?km9gtX}7r@M@L;}Z+~Z9_v25WKaKPc_PyT0fx*F7 zkG=$Re;>@EE?sycnoLvZ5b3f3?mIAQ!ykV6<)4=sm-E6UShE4n%H7q~&D)1!@MoxX zt+&rw+XYUelan9H?cl6FtLH6UymaZ3rPh`mH0tLQp49 zwGx~m5y|%3x0l&@heN~>grjt<99^N;mbH(5gN$iy2@wO>V-Dw zGA%*fgm#XHwH!;au(rC|5r7IS3OhRT3yQ0&d0ehQ&{5Y>+y8jDuKyn2iy8*&Jv_I`LD zf$llQL zc(_=)!V0%{1w$wwN>lb z zGt|LZ*J>)iV#av{w@(M)cj?UViUSx)@ z?rs9teWoasvmeDUTrxNJ@X@2WaLn+C0KbUP(9j5`uNh9zNXYI`5x+bNb`#U2MZ_hf z6#-6DUEgrN#j<5~_Usjlbc+Qe&nCz3-@oq+t6S-|(r4|wg$oxfSZcU%;lg>qCL$)Q z&jqf0K(ov*h%G2DfPTw)rDSs*HAoIUJ)Pa%=TD#QM&v#L?PaB)ayv+g;P63&jig{s z*zP^Q|9KMpQPY}%$5fu=H7_Y1Cnkzd6GuTOHxrkN{7iZE1-3KgG>xnIts@9=Pv3rg z`sCL|_Ed99&x6Rz%gf25v4kex3`1@iVT(bDqNHHTErX6BaMzAnaM#z{+Y8?Cz;z;s zlbn@-m33z36uQjxoINM2s~bk2jE+VHg@wdTQ3u{&a4%oI%p>A5w*4SNxky%4Mn+y% zR!qL6p&>@QxM#R^bnNN)_{i93!^G!DWOZw$Jd~V$TlF zhFP-|OnF=sOQmJlk{5tGH0S$ANBRjIEsKf*5H+xp&f1T~A>bj+9(HiFwRInzm>B!h zKMWChN~>^;%fN=hiP}!SKN*OMNk~dc;`d65$amctZYZyAt?E5D@^tLk)3LFUk*6QN zJ)okAHA7Zb0ttV*h{zAqW@to(ZBk$<#OFqYZeG7(-K+v07fGL6#w30L?C$*Ik&*ts zGpDf}>gwLJIh0mhsf^2JW@gi+H-FJ0+qSWZ(YO8~ab#_~P!$8*(QCj)#3iN0w(Fzg zfo3LZpy`sAZua%p_FgD&=xrK#Ix-1t!%shanw(s|%yp&MwCSSMDg?IaS|@TguA8MW zD3P^ zpWaPA`!g_TXxC3$78A*Zmb}pk&hn}6>6hJ;PMIYk|_(;YUv8BZ(Gk$;_ ziNFWtF4kSG>+T;Jc{B0`Lr@<-Jo`NP83EjV9!&{3NX;10v^(T__F zvbDE`UfbT$*b*cp9CHfTc8A*@NMrpVCaJ5;f zvak2wjJXqVmjs(*BrPi`Cq62{mc7h%XuSF9@4jK7peg-@kz6p^A{DA9V-aileaq}Y|BR9^_w;X zg>FF*A!zGnDRP0WieHX2L5ihC*J%bBV({s+9rb>`n*#`4ID#EE!qWD0!geN<@PziR zY`fNHZDS)!{{C|#qoPY!kX><}Z#VYy#;ST-amapajxHHkhd`)C@5%i zfUigag)6X}YO!~5 zv1=V08hu(aQ_I9e7mGk^cfOF1)^BrL3uci{H8nOi^Z6cj>Z0>boG8P;USC^}MGA2@ z^6?{-drw}yVQ^r8Cv1uX~!QLotUhir)8k0r(u&k~i0K0-|>BiRT1u+(g*ctz#6r zfuV5yI{&h&UV!5X$mnWeaTH0Q)~V!mx-(MAS4nBE=AuQv*gHF$>#69L^PHU=1VcmU zO1dudYMa0yiNQ>#l6g9&7M6~Vp2EtZp`o_s_EwDhv`#$v>xt0aR$d&VkR>H>m$G^Q ztgWl%>29i3 z_TB8OvS^vBy{oHzLt+XYT)m?UTJ0lyJA3x_nKPYy6$M3Lb7NOl3%#3#l|J_${i-gjDk~{A z!vUi;Y}Yl|PZ=NU<;`>F^KGmwc*p0V)f$Cx%;RA)!=rf&;5=P^6lJMs>qbXKV-7Pc zDljl0EG~x=6v_$WVEiY9vvup1EnC1Fz)>LiPox95azU#Ao&Z0Guhx-T5rOfzMZ`JE zveZ|)xVZ_dt1H_oEAQWb^yHDcik`gebOUs@AkA%~7&aUo;4Nros~bD=t>!4JMn=Wv z7qdP2&9J{wuWrkx@8-w63lI3R7~hL6;xomDcb1@myR&~3%ZjVp zxwvAe7aUYowG9p3Uv4=(bbRLY8J3`?6+<<>qvKCUFAR_J7WWG6O$_8zwRKFFI=cG^ z8=G5OTU&(9Z9|Qo>eIv|)YMcVbLY-gLKzVRonoK{lEv9bGrwE5Zrw`gK-{(<`pW1x zrlJ(!;Hs2eItkmEKN#YOIs&c2K$Odh{E_Kwm#muCR%Jd@-Q3*VfIHeM92yzxtrm_RUj}E!r1dn>dGq!4jbh5Ue13ClTiejX zhe&13^RYlg3tvh~hNZMQi2M}Lu&V`=+n1HTju_iU#072LvT?(fpdhAbLXGZUR?#r! z5Dm3;U8v-c_DQdJbT?^<{kRg-VnD~nlm(m3Ep~7yF)1m>e@E!#;8-p6WZUsQ+J>um zj>3i#QuGF?nuLV_j93IMh(TM^(eV9CKO zQdZXPP2i2V!`NQ%Hbh{U9MwzclW3Ho)`ZnD%ypkdlp}Cdp?7xj9&oGqZCdvJs&u_TdaDM#94}_m+~C`}g0Qw$R#P z)23}(f`E@%LI54GDa005H3(|!vD7E#s0Ka<=0IU*g~Lp7d0Td+kZtb-!k|ZNu~X%Q z&NxstuK_w?WlNiIg}ULgWy@SvVn}oqrG?6t%9f$~4_hi*QHjFn9<_P?h^C;JhnSNI361m3+}SAaBK#TT&A3r$MV2T_A7WhyV<|N{P?*kJ6ii_J#@# zr5BVT%AtExQ(Fgc$ops+)YX=k6`N_w0-TktqZ6CGoB?OgAoN+`gLs147~miiPoDkt zX!!yH2cbzh@5;)dN28UM)mU)?U2B`LnKwgJa`tQ`Kfmw9(Zpa@R%R|Ux)8Ss%#kNR ztx}5Gnp$$0o>P?-7oU+2aG;H_kwbKKc6HQtqGm5HHdB!mlQS^4wQ~Zt<5TG15kAXT zxZ1CDg;HBE2aSyw#0`L>y&()OxnP;bUa`WvvZ}Hg%n50Eg6xMNEWtE0z*{KO{!Yd| zY5I{DuU@@4m_&(z*aJA7NI90Yk(S&{9XVNvdHMO!X*v2+^>s{%UI%2|we@Ai4#wKD z5^@HH=C<}k+=}HZmOGJRp# zfQ`y^XHgNB!fZ5LHiuG_V|w$L+QwMLD~yaGvr;I5R*hoju;fjw40KHLXG)0AE6Xpd zMI3>})zo%%gE@+KwH0N>#l|YqtT}pywzg0#eBn6RoD;=5C;MggC{k8X{;Fi;SNp{a zaFJROPY{j0!4{wikz<<${N`o{QBm0`wIX>%BuC&-#eM|2D=%IiIhd8aX_G&oZSr5I ztRu~mx6+>}$C8^PD`)@Z5;{+BA6zT!7ca)3GQ@Hvyn^kDx)ji=DgQSMn}w^emxFeT5&{WnH9Q$- zP*StfF%5X-Xcj7Af`+iGsI4d~rf($cU?MY9PEv+tl#fVKTMyMTnY9ZRhqv`*B><-? zAt9q_U^w60(EJxeXNZ$Cx+V6`_V#F1yRhA0TgbO;-U^}pGGdNFhprfUik?_*02>A{ z08i-ItR*H!%&kXiW!7A9i2YfZ@VRmXT1}co*k;XAHUe?7rgE|l4!Q<%tU1$-3JV1d zNc*+*$Xy)>B-Acpz$F-~Nr=m;pyD+*!NbhV+1bq2!I>e_&K8@yt}B2GbqdNAC)>sF zh$TxFFSc6(+>V&p=b`h-!!9W_3;yPbi%Wqx-vHmx0LrV$S>gLLGO>O80)z4UHX^rz zIb~&ODVA2g<~$Pi5j+$S!RXq&? zoM0{~F;5cIcPFAsh)ChN9f@r#u{?;`6*c`L@_QWPvy&2>1g8XJ$~$ zY62(>*^Z7JIo9n5SpjJv3bb64z?CcEf!l?S}eg>O1UjVNVlWuroh!Egx5UR_Wv2GroY6oZR(WhAhelTp<(HUwR|(J?V*;Lp&c*df8p z%!CvRbA!h^IXajlKPVXn?2#;NT9m*wZYp#Yk9jiMA9m zC#$BZXJ}$*W^SC2kN~$Zc5rY2b;xQCs6p9IPN2@r(7@CXi$iJ&Tie229bKG2AC&9P z_W(Mfx`?QxIEyx0LP@PKJ1W$X#Im+WU~hvZIUPINECs5BmE@!_BC9DaCo8Ux4X@go zdaNH%l5``f*3gD)1@;VzomB`NOH%G<6+J*P0k{}r9o;E#CWeMou27B4b9OW{HqZw+ z3u|j@OKS&W&Kh>dSRRay@6DelGF?(a97PFjQ!yTq%!#101QEf(1P&YRVj>a>vu45e zq@@w>AS~8WIK)&fN4+o1xzv_XVONj*Rf6mVkC2qXT!@~zl^HBA0sd-;NbCSKhK6Pi zY|zFlb}BYAGSW9SHC?)NDVEljnEbSZ-MN!ZdU|^En+cq#n538#)EYz=HA;d}snbe= zz)?kxlOv!G@RXFJb>@g+T0+*ktgx^G7FSlp%2 zLP3IwuCWR9if^E5#JUogT(N_hj*bz)nJit30U9gl7UJ&if;|c7l#eyfzi0&^F@3fl zE%uon4u+!%9S4oN&3-7RW=pX|MWrx!Fl)AwhBQk~TUlDZkg++q1T3x&#MRW4G3d(5 zN@8Rr8E{0Mo}Ph;iGguUjIps61J1z&M4CA`@JgJE9bt+(`a1ghriP{niWXLO)|T$p z5B0ZNfDM`5H&UF0%^fP2qT*}`}rv$&1(CR>ysS)@#SkYU$x;J2#1nvvPDsG+n;FKSpjZ<_ zkXY=<13Fz@fHSnRvM@BYGPOeM(Apir1YIz4RiSsIy6AK?Hd$h#l768<5g3BvP#26g zAveQ={S^KERW%~Po)k@N(s2!_SHY-)i?haXPbQLd*7d;T`q1vLttc;1Wwa^|a58ED zXJBTm3+l`mhcyFp(5srbY%FyGSD$+t7wx_%DO^O z3}`gtN=oe?=xylfY3M*HEGUtNRvE>zWap}>=o;vm8%IZ*B^c}I>6%jtGcksfI21dT zAh#MI(CIV2;OJ<_Jlyl$xoq4+K!`AhCAEk+IlUUr(xMe6iRFYJ7TAEcc>@`p1}rWT z0F{)L=PI!IZEu~=|cesNhX1-cF_AHbNPqO+@~vkT>>HdKl;SX2HAqcboE zbIATNy4re(b!H`2#>P4ZCYTT`HZ#}O(>DZjlr;#RJ5Da}ki7UB znHbO!LrqM`Hvh)(M$GMsB<^teD=R7~&B0SiL8C%Yfy57gAfxNR>ITl*Q-?4tD3PJ* zG6@!%xM+f_{H(1D=FE^@jrFu)fQWHshQPU_orKN@ZWr%8th(pSUAec~%PQ*D< z>rh-)PVM+{G&fmO%dqdPfjGa&U5rFV?xHIWH`fXC_cav=d9b;Pa$q|K?mDQ~)K`n8 zt00C3*r8MgoeX&dNi-6eo{qKwg*Y=rWmD`;il*cD=I45RkUl0K=N8hz5wH{g~+S)v=sr`KuO|3X1b-@QblI zjLl&yxSQ!ml*}P)bmWib8f9frndpH$L}6n<1aSn;z`(%J1Zp+W)z;C|GB7kXv~pk+ z>xjHcf+JceN<2Jq-vdU(#4ubasenlkv^RgFl)rfc-uo3@I(BIa-%j9*#0{My{i6!Y zdHFPh!;F!3;p_ukf|{Bg&?@|yl**FD^Z_xastt6AbSCslY1Pcc#1yfFP)6(M>ged` z8yH$xSvX)}=8nZ7suC3HrI;@Bbc8=ZFi9sShA=!E;27SR7)P2dxN*JiJGxyvqoP1v zpuZ84S3!MEAtDK~7uH@tN7ztuGQLW*VbeucN>)})?Pp!6H7X${T1U^=7|b~X9F= zkVhtm@mnmuzGnzp>!YW0VeG#bgjh{%dfg;Gm*g*SoHFeMc7? zOGSWkeqmWYo~Y<*x~SIdtYwJn=;$n=6i2L0iHr>V6?GFbR}5?p0mRnPnf%od#DO^- z4GnEg6%7qdElneEhguWhZ1O$$I1I%tHU=sbxxd@W0E`9Jq-4nGzW%O`BTt(rrV;JY_IC~a0$BdMqUm^$Mrbt5t4c>rm z?$0Qk5a`U1Aq)($FvJ#}iJ6s&LkZF?(x!^CCaBZZf!SGDVBPO-BP>PAJIMeFGq!6O`K&#N9iWevGK|?VZV}80`t#E#ocHfG8I9T1!+87Lp)`e@p=t@wno0!C) zKG9WGn>$BMO<7e%TU*D-0_!h#Yik=E;q&s+nl37?7@n4M=;Fmo7cU;lp(EIt5x)4Z zD_}2&QR?>Kh(9qPi32}l-SAlQ2mjd`1qDkBV0KV!4Ju7AM>@r>S6{(@9F=xaz6-KH zPBy6OLao}`Nd3kpB?xqkXltv^nLAr?4)CdHYUt=&S=i#P8n~~Am&^R=(`IM}hK9#o zym;~IwJVo_E+;2EBP}P?PeEZW=@m;HPS69oTioQc_kDGkdPNNOpQT}HT3}j;@!`Tk zoL_>UQaGV)>P`*D9WXNoU~p9k(uAxOPBvg{1v~(eCmJ2X6ZD^##3D3ED_0nw|NPGo&48ZJ64)&Uuco)2H^EFKRL0*%|?L?59 z#ZuNV(lEkgGn|59t^?g_=5R&{LmU;#%(3wA;1E^jr~zDbbd)xe%5-%x{sSdPL#v9? zijX;SbKn;msGg`*H-CZp^y%s*7Fw#DG-&nW?T=q@(DcpAD|vga9NCkXlbIEYViRWf zThNKu_g>$@L?Xa3Cm^IGrIj@_l%t}JOrhIC=oML?Hqkq~K^y^s{8z1%V4>JKYTD5W z(NU_}WL>Z?9dzvy0=0n+0(9ikGIDY%8uR9~Wkp3LMfJ!M zDAf^1x?yosnd`qEOTn0VDk?J5huSJ|O-)TzxGmjh>t|V_8t7zXq@}5Zk;TT4$?%7# zA3uy$@wD`f!oqWQ=3Tr>=ZC-j^JVheU0cWGb$(Skj7f)M!)+b3d5; zfg=Rssj4W!Bw|@v&?hU4T1H%ay1Z%c$Kl}%y*;HS+B%WpIXQ#8)5ZGXW+N#RZ%+P}b3Iw8!B}?E$r!PD|+ryjgd%`({Jm)jmKSygPWcNJoZQO?*d()FF+{0vOgD6@oTb5%)a-b*Lj5 zQvhqsccL^ej~hhc4>5z2o|<;}Fxb0%`7+?$xpVE!M-ccbFBf-z$V$%)E4p#)(#@M^ zZeU`MK?lZe+_-(4Oz-CHTer#breqNR16=SPf(L+CPsB#eVbMYi0&ARtNiiAVfLs!7 ze4H0yFftr6#T(sM>xXI6S&BHkhRvi1I@-zM;ErOrEo#o5yvrx9T)UE&mzjj2oUDkV zV@1b^w(kOk0ve$MJVHB2n5T40knRlLxpU_pzCa0g@qK;t9H?&!7vPCYvS58`ic%~r zA0?)mDhxoT7N-LmbV7>dABO{nbTcy&+~bzRL0=!OrK!Y_9u|T7ig7sm!glT4Rdkmy z+=T!k_<~BObb1T7LS)Dy!hq`Dojb4bfb`$F(?>9Yb?`(KXkyp{Iw@&ppi4$phMGcH zdo$`JjY4ojN@SY2;zpcRlZH6}>11e$-_n&<~_U6qSdX*?zD;KT@7MT~!9il|?d!LIGxB!)(=*(<@%^WF@5f=gZ(qN8 z{2D<2oq$CrMlSsV{Q?651H;083rmf_y|0|Wh(W+N8+(Wo!r z;dl#!jR6@Fh6~^j)=(i`j0*xhq7Gz5aI{ZSOEV%2CP#*c+bSKpc5?Dn!h;77V)N?@ zipc0lw{VENgA_x^AqMXO+&$3t=G~{aZ-DOY>jp-88y-J+^X9>0T(A3IzwDp-X+y)w z<3Gzv&7BKyFdxkOhD9*!L8}DqJ8{<@zqxiXjOHKlABX@THNE2}2^b!@MQ}uVczRCG zwJYQAAB>KS8JV7_KZaCFLg)}Sfb2H>6V=L_kFQ~HuVHZThKBljzb#iQM0^kbjF5S2ZCxsi_1#u+A8$}GbBv2vj zUcGtqJG94-M|&TSJ$^qjHa7Nt>@DsZjJs(A=G&362XE>9bXxcBWp#B!&xtr@bQEe;lllEY0wPMy~V&Jz+kbzVRZ1;t@Kk7pq=|%M8xJgzK%{kRc<*)`fU#i4v1p=Z3_+v{n^CO z^yirH$Sq-8{Gzr5{=CA({O6$P=)fAmKbCZU%2yM5vPLYL{AHS9(y4o zD5fmz)|z0S_iKlIzHEOHwmL*NHZjgBZg;pz@SmY$A+KUr##zSx9BH>9VXb3a8Rub$ z<@&Vs3BfwSTCpN=R$+4@71q}V-w1jb(h+|!b~5gVnD&@8AwHpwoL%t_@l`uN?bycA ziDSptMIYJtYFE`R`(07H9Cj_=elgbARst*SXW@ zFZXTepL5|tf9vHn7eg*8-d=NO@T%SQ>boxgK6!2N<@Cpg27em7J~;MgXIkkYpWJ&V z)ElDG#IxUK9#6ly-#=~Tey4o5qw~9QRthsdHqVgYZ0|OVtu6Ufk)XyErxR8Ih_+Va#d(Cz3?t;G$`s6=u9ceG`&^ z^`XPIqwB=VPGMVTOKSVzwXZiiua@=&oS$)iZvWZy&R1^?1YX#8;n?~Ax%tx{^Z&Sa zv-{e&iqj%VB0(b3BE!?>|5!CGVp{HuQwo~8suq4OQet`2H_seZx-Y*;%icK3{ORkxhZi%CF^NRO7{^l%pz3Tk;nl9(hYuM{pKIz+D2J6O) zZv8!YW_)?9-L|N>-xD0;;sX`;|8poPUGAv<{#*I8Q;wYA9@0tgF0d>%*#E9j;h0&b zL!pO&Q+4jtap8`tJE!cL%NkpS+uC)S9t%&On|V&V$FJVBFY(9Bp9~b!SPy4Dmf19C zxza;}Ga4HB{9?D_Y}~S%{9wqWVP<=GEFgu6w=xf|BDNY}Z;|@2a*U zfOC2E`j}21<%qRgzAC>~`$cn5U*BMs|lyi+67p-x#{I{*u&f zgG<7TkM4XNJaBvKu+_oE?OSt#v$vcot9#X#{73ucKW;v_k$AcH%H7)mw|9*l>v(vq zpgE%a>4g~=RIZL)oN*`c?%8WQ2b1oW-VeWib)?`y>!0I~><4!rZn~#AdUWK{*t@45Rj)*rix?of{4UZY+B9w9w7(^aW`xNFYF?RN zEjA%h`&0AG7gF9zQVRDMe35vp@Xw6Pvnpi6=UB|H)Htl!Ilp(Fx9h)EG<0&!i;ecG z{;Z>-drGHR@9`pQ(|3B!=B|qi^re3}X{o7yOhwxv)ZWxdYs2})_Wxf1jsbE0I=(sb zJ0v=}JUlG;JN8EEMVv=CR{lk?N4rRKpZM;wU zX(xF+U5}Q)gMAJK5`h{C6A2bo4%H)SBKjM+B-bVL7%?2x6B#6@B1;|YCTS=}Cm1QE zG@McKNpl?eEN(cBJ4!H!D*81OE?Y3;A5%v~N$5_?Vi_I;B$OWICPON7CdevnD@-TL zG`}hFGkPtQL}e@XHt{lVG@3LyN&-^~XYE+_rI#f^+akWe?ZFN1L9kFl{ZH`t^A8Nk(D6#I_{|6f@C&C9>mHwKA|iuVBC!QO!;nw|g`Wha~z z1OB;=ro6Zi_Os_L@iGLn!^;mxe$nX8SFYX}9eV``Ub~oz`U{rkAvFforjL9%PF}M% zAIl0*Bnz`|`-Tud`f0$|f%yYO=`tkgNlNi|vp|o>A`jWFtj^%75In;-)9GEpqh;cy z3b7D=&5qa8b8+_o$%(+%K$efKQ^~5qN$h`ybsN8rf!Eq}ZP|iOJ$F`qN8C1o z?s!VO4-a13Xy5Td9eo~*geV~cG-HbUX}^4!X03$yptSp0rFK;Jq4$7iVBStBejR#9 z0DAM0Q|GX^BRZPAI~D;=tbP>~&`VP~A!JQt^`d}q!&leam&CUcE%W>MnmwoW?V(&0 zXLnLw3bK5*`y%g?&4`yw(8gy(4mSModD0DX^0{o-71J=n^DgTPLSrn;?~PP&nb{xF zUASfKXG_sU_KSM&Dw=yNC5z^RGt(U;mQv zK?oaSyd$EZoF}_Pi#{zUyzJL(gH5DVu>_-y0);_;Ru-5VwMubXY-|BX*rn)q8=171i|eLB`Q&!F#VUwMkxOm zbNkQl0nQNdRWftm9e>)n{W6(((4S~MKOGxSft2UOPS*D|vHzd<|t)Ou=<608NzN#d^bI?ZYxD-`9u z;Hpt<{$<}m8>HK(_d@xM`lIpJ8e7@fLWS9CrahA+ezq!Qn3V$XW6!*aNzh-Hz>oI; zf@R14T{L=bbgw(VAg$e}^5oR4qZ+4ql5d!clvdEHGJ4`GQ6I{Q_x2D>Wy(`f5SkAx zh2^g$H-R4X8|%TOdmi*2THFbB^*VXo1Ej|xf2&MWf-EwHilWPZe?9kHPYk|Du6Ow! zwwqrxm&zU>S5{&*MryB?p{-aWYIOC*ayYs}w@OlHrTt*4kVaB84i#IC<3>Pq7a=JuNf@wnbh#J)nJ@vByLtZYZcEFt7nN%^b1X7qheR>!(IyXMQ-oxi%m0`^;Dwa)u_K!M|VLg_|MZ`#Hx0w|1A@|Hi#QF z0SYvd@3-1yN)`}tm$gDR{8|cPn*}+T>??{ue`Ch4f{k3f|8`=RRe`Uv4iTBQWgKf1 z*5~V&kT^p2JXky=;tHfTd)eD5Sj16=+QtJlXX@MoW6IwhS8cfJL;r(DrFmEQ8#u$UKa1tSMm zX`rh;(CsPbtl3Q0tN4AK;fuTn&5Kce>!{n@O0kKR>WCG{{mlQ5YX1Wzlj)4VW}Q7z zFUP@~ei2ecbtp5c6asc#MO+rDZkzl_xs7~qocsyONSjT!Oo-nU55#iXYJ_L|VPL8oSc)-UFflCUs(lR`6; z@sV;CqXwbzyfWc8BVqP8sBbP>Q{gRmGyboO=JprXP5aX;qL+UUY0BF%Xi-%0w__Ix ztqZ~9I$1xC1d%z52{jdX>u9!Otr0rV9I!3Q$li&qb`Kc6$+osB7i z|8`iDuIqHkq+EUHELI;CyMbWM9BnSDqagso;nlQw^N3nZsQIB*MehO0QJ^c!#&<(T z(Mb1l@0al3ZR8`l>H-UlHbs|gdgBuVWbk?BX0ds^#(O|GIGrg(mYTUx=zu?M(_drh zQs}$c_7ElaD>v9z-inJ0^lfvrzB%rJ)=k@Q6wGYir|7mfQA<5uBuX(>fpbfx680lD zC*4eTgYwgh#k*@R-S_aPJsK7hS^X`q6%K0?J{11_sJu@7TseF{;FTo7@qpn_&Ad*L zSWKsjS&G$)UM**eX0rJeie~2$a<;SOYNT6$-`8`jad<4sUk(>el8W7);)^W)!5JI` zXn#;`X|z$=tdZNFD`G+7ysdQF?I2r&r@Kq9?x(X-7{M4*6AeQ7@0W&;jj*i?!0K=nPnn z@R}kNrf1=blZwJLJw7E`Y3nei3%;$TK<2FyijkcsWjF=>86*c*>oSozf!I^^oab#6 zv-t;MHIL>=;>p?BD$LWbt&R{B2!RrH1ErYs5#5p#?mWZ^!LGwSAfUkbjqmrKz}%?S zlIqcMaonOal6ydQjjx!Rje5z65>%vr1^wF-C?r4|myo6hO}ogCYS>@4arcFEPHB~? z;Qs=D#Gc>Rxh3*_nY)g7c}Rke=C}u#WL+8j?3dOtPyI-pZgBO`;itv1(ttTx_8aM^ z_FJjH;^?yU71++6BMe3T-o0~YFE}lf=9EA3SD2Uy#|e3E<_qOkI(hhGWFM!|mnYEn z&-ks3%EciNj&qaee`ifM)F$lMGrs~?w2yYs&$ZuyF}-s)RYaMD7p-uERVF^v3dqZ4 z$y2cVbgz-1&7$KWx|KVkNVGGe2x-WY1GGn&h0D zRXHcvKlSdv3>-Bso03Tv7bA~kL*hlcX`7`9=v+`s}~YiGRZ=35O=A)%q?^ymO1)_|M4GZ08?yRjPIBR z(FEfsawSgp`DkjJZLX8(;U~An0WUmk?5C$?_7Ou_LjLCWfcRh+jQ6eX^!n@!{#rH; zK#BuF*R=bA!p{(~PdR^3R>*Y`7x+bIwG*5~T@SYUUmCd{D9-P2Zz4IC8wA@aeMc`VIS!(P;wo+dRPM2)|~H&7Bh``Gh`@7Vw6vV ziOOXd)A`}nlB8;0rl9u67=8zlVMaXcNeIcBf+aH7JAGFGMW)~(uEb8ajDzlucuQO_ zB}03XcF?JJUfv|?lBma-_6bu4l!bm9KfKLuMsi#A_9Hfg1E{i4(4MB9&}5;|r6yjU zsZGsK8yX92Bd!pWK)pJSzA}RP&&4kr8TC|J$H~TKY+ot8Jfm1VJ>AhfVjEc&R&X%a zAGaPwaF1P6Cgnbrt9A8Vjaqt|X6z$h{`=^63j=kC4C&jPM(0c0k*`r+^;Z1x-D)Z- zQ#|&x`TNBqQfFN$WUr|bD^=FNm#wsuK^A4gIWs8?9*k?*yE=x4H!| z8kYGKTH1U$QS1PWVWZ~e9(gc`uk?EmQ5;o&l8Ws1ANR52j@dm=D4Vf}%XQf&CJJB| z%H+_kn1GAYtXQ*MA-{QFyfIbk=Jm^Kc6;qcTOIaBvrJUxJK#=e&kChdtWN5XZBeM7 zR&DwB_tN&zZDOOx&TPMKW0;uPXTHZWa$NaiXj(>v_`4+^@BoYdW50?$lf_)`+3 z@_aM)~Zk5yH&aUUV>r)WrW%xB#6n~ zctMNOYj}V}7i4|_;T#L6^~h?fbBk|%Mq%ZXT9MZ9Aoy|*D5BU1A6H@;%cmN-jCk7$lt;&$bZs`|NU3^?+tr!Ut1r?!7{_HH&r~$y{Bxlad3oqZLk@*Qc@V;OwzXt>xd`7Zz zZkHrAG7^6{i2TG3NC*;81Lppi4X87&i44(|KELK=yRxj2MD;21Xk^b|%`hYe(xg zUjIU&lvhENY%xzO+ZyYP1B_-KlV3r$H=ttrCdYYXvh-&-UJuH>eNVY=6c6z47}|ax z@{@0794urcd72Sa%s9Cf)~~m@fyPTf>sPdEPrq!!M6KvxiUhe63BhJXz+$^ue@d;4 zQm*K0Sl%5=f?4eI%AfJu!zBFh0ic=_ZyzvU%u17VNM$n(+VZ}FO`q@sXH?CT;vIcU zV8#*K*z&;nYMiNJ!*VAa{Q^dzJst**RJyV41q8fezQZ*cYSS{DHSfOFcs0ddWS? zk85{xu?L*KKlY8@lU|y#4!~g@0`hDQ*VtIqk2xt8{48RjS;1mq7|upRV0ItA;^n)X zQ;pjpRb8;wocn$GPK9Qt|ITcWZcq}69Le==fHbsDOSkosxP9pf5^^QrSxcYf#Yzqd z*6snzyyI4%aOxo*vbS%3s;$;fi5P>~=4A=~ELn}L;vFL%ypxna)sn7-2}Dy?iV>n( z$02UgZX5l>8CGH}6HMP8;RJb0pC%fNvBXy_)p@z9`Yg_Fa7F$mlV3(M*NXwSl6{A2 z;gpxgWLPPYS*egNKVcq$WhijMKRb)sD*wjHh`9E-xFBc2tUvYr2Lt729B$%K$ck7QQiA4U;`4ef1t1FMtX(3& zXKh(3{>0gi{Rhc^zf|WxrvC}2jD+(Gqi3e)-?lBvOF*QP$|SK?+{RU9F79ORI9oQ5 z8gEARH2+mN0|U76@_p|CTAkf~V@~_`fDoUNUbhy~6Axr)v%&}bbme*`*SGJL?*TtH zDohzg*th#Ti_3oj&s?f-+)D#&IvPJ#Q4Z{gt}|JfM2p{2yK>Pip>DqfY!)bUepU1z zR`9qJJe2AUx4wBxw=tfvBu3v8Kz9u~_90lxplA55P8M2?LAW9o_IyAE;DPcImJ#12 z#Hc~;(DwRsF)_ZXjYU?wj&choMN6&Lk6r{#!4qFzOJ_fkd~p7!0o`q*Ic^-{HO-zA z^_qY^CrG+JoD`)W{}g3rm5tUs*0Pv#NYfTQSptxsnc=NN^Sy)_1rHZaEpjK}xhx+_ z_tr`GPAr>T2wFr+1NSr@Qom4OJ5acWt7SdU@s?%aRG4r-*VMnB4iR{i=VM@>RT7F~t%=wl$f3aJBWs7} zEiMHO{TvJA5FZka!|PCUB|GV7)yTC5RqsU^E?h5|VSvkQbLT2|wEe8Z7C<@WOZ~Pe z^YP|MNv7gomJ6l2s2{hXuKF&LKbx}f&@u_eTpop0o%XM+V?@0es*KH3G zGBC>@u2<6eiN5az6hGLzglVkU_wTS|Eyx8ys@)6&pV?9F&;0R^Z&Ld4>Ezn#IKL)3 z2@g0{tRO3xKuBy`G_+7<=V7PuZUqg!oDfN#eO@lS-KbaHb=0!@SZQ@45cr_y73$5E zQHP%8sT7)9wCWr3ju>^}EHxbA7)@ry<-|o5edBmDaJkW(pg($WDsfRc;Q+%&R;-b3 zKU#w32hdqweB8VR62@JGJM$lCdslUwOS6xqP3;N4X?rP%bt1o*JK-C94~Q#MNr*Ou zYAs!*G&P*y0=@Ld_T3${S2dbUtK`--a*4bANQbn4EZKF>WNPJ8{c|42~@)2 zowLO`lhX!q?=;B#CWuRZ)hW)IhbGi&S~+#OTn8Jr(K?Y2j=u;OL7#|}FOlqA=~Or5 zRJDX`d*MGOdl4@N@{sM5`G$}>Qfy+2M8EbZ617%xs9^Sx2f0IZ_SJlVbVcT=4ptH3 zh1tY<&24gjL)Y`6kk z<_$hRkKF*KQ7+Iu4mArSC`pLR!ivtm*|({ZqVNtG*Bf6Tf7~5tJ6D`#e%IncI|$

    bpeCLD>70tceK(=`ZAI<8MWm=qrt2R@r5Ytdt_4Q8g@33+4ZJyq?DlHf zLEA45W&|H#VnW7yn|IGHrdu(|c0M4aWpL%;#6VhR;H=ibTqhJN)dSp!Ugz#hF!MN+4tg?8%l zSesYIMZcKS;HF3VQA)$egiJ#fepkSgI0{a)uq4ch5p{>4lwswBFj_J%CKT){OBxnaFTtVu0^m z5HfS>XH#ik>0h6G6}iw)S_zrCXf}w^>g00(^tN~Dj6 zwM@&Rq7m8+@-C4tlNOMRL`-_k`Fh28q5j>H&Njt8K*vyd!lp!tPK7S>GrKaqo`Xi0 z=d7*+{o^Xr)iC;E&^h$eX$sF148h}{d%ANuNt>ixcTi>2(AD5$TjEpk zXOAU%zdQ5G3k^55oT&LDqI7c#d(ZZVaco+%*2CL;5Tn*sq3>9YJ!I2s;m;a;xnS>% z1iW16jbnSzcYKr9rWMt~==WDzC-(s8$BO4L<1ddB`j3D6R#jL+$hAg|bno7ghiHD2#T1+K zfo?@mlX>bLED4h|5CT27Roa0T)J(CDu1YGYA?Jq3fEOu?Wt`CX&)fF^?lv0ME0ENv zsS*^;a|b-q8_LP1bj=cga*g{e5g@0t{MuK zDn>M9y;9Jr9+ksN)_vvc_+HRl`e&~Hz9GVq=1bpmeU_|0rLq_)Jm`RVuH(=uwhDfs zbcerQt)*b^7Dk~T8}otZKt%L*!d%b~)``B>Pb^X?onUSv_f*_S_{jYN$xPN44%y%VjL_*U0osOH>$IR!5p@x7JR`@aP-b<7#HB8~SpJKKnBD`BPtiM7FYf`KS!WZcZhD_8Fo3(yj2DE|eaRlSE#O8R|`W#)^aGdJkXkb%u6b76_YaTXvdv$9MJ@&3> zeQq1M1xKr1W!yeGEqm6e;i$FlDRQb!oXIr&Oxxv>pw>S2vutg>*>bSV=3z-s%O{Bz z7Ii9>7=jv0@v<6my*Jkxf;`z0)>$j| z_g?#0ZD|_6XhJ$}>Cbge8_JWrtl6u@_{*6qZ zn)65T<;^W$nmqdB>k5_q-YP}!qHdoKf6K$Pvoy>SU=68A3wp~#2Ec7-JfS1)uhQg1 ziq(u29}Bvi9z)44^;aH^&=o=guJ+ z=|Tl_qPRYz(HydzvN$0UQ7Y_ML(HurO~T?IHqsR+L;~9X*%kh=qa#|yfL|5B>eZ-SLZ!jjFCK(C!x?Rn&r0(bFho#FWZOZ7Nj?xUwRWMD zt;&}v9r2+tCc}HdjcRG;PLKVFIGx0BfOJMP>#oLyLf^G?X8g9!(4XHt5>se?S;eK$ zdiC!a=)WFJopT|A3~Y0EVN4-9p>f<5P}FEzgOt;G%Fj1U3P)tk2gn{C}ZMB zH|c93)Qtr!Sf#9rx-hs=B>OLh{U4V7-wfE4f2n_?73K({Jm2eYicV(y;j5#vQEjUW z=TWiW?Z|18UH(ew(fQ@Mll~{j3tguI!yffH+j{_T2u#a;CdIpJk1}&$Mh*B47`OM# zu5fgm@z=kXA(g)exFhKf*RpuEXjU)$A%FE|hAzOr;Ka)H8N3AL-VK^x8}-rJHoa-z z35yp2fCpXx;=laGHSm=ns_xkl0DyNBKytk`nd#top;M|naV8x))e_0Z#bUWKf2Dsx z=x67cH$%2|Ar&!I3qKXr#Fn6;8=)sTDmkATo$X+bcA39moBD~c3@3PE04u%VyYgp3 z=onl+Va=@ep2K+`d!uOUCt)Yp_^40nJbL2Pz?{Va%+UIWvL-IcCA(wkJ9W=uMBJUw zR~HBF>U37Qg1YRo*6fDb*llw9(AeI3>6$)cT>O$wMduZPOEohX^iYhJ(>RiG*7M6X z0%8=^9G>QB^LhMhm9RgDwNs&YPRG>FLn_yIjL~xOSl8e1R?R8`o|pvj;mMkD*tnh> z)Lv-aUVbp7+9p;yM&$6E+Dw#Mwv9vl9v^+ta}^8`;GaIUGtJ$qlvLw%No31y-Nbco z0Y7({sypK{-21>kOxSf7n@8J`;Q`OqJm0Bab@%Pf?vzUA@ z!qrNr;Va1Z|B}y7X#)4Wr)zGe{A)kLQbu_$;*>4nRd&QvozovuRZzvx;^aQvKbrQdGGDMndape5Mdqnkmu z?kS0(^-iN2*P?t|n%J+`HBJ#q3H!)Y@5j)~H=5*AB6oVIv4Gj*qpWV}Tv7c&-UZ%? zE58*eIx)a}hw3g$MOEqK#WF;f=6a>f-&D^$Qbe8|H#@QdyJ#*J0^p*OZy+9wtVYxeGUPuiD4XXBfhH!zIMj|Z(k4_Uw3-4Tz$|6+AF zRsqB*=_1iX{&UMM>^p(X<>M7eu=k+bUjvZUAIK@;q8dOMy{W1YdEH~Uy3Q44`%11$ z_gh@W)hONVEHS8WRqsnv`{7RHk$v6n4)~#0qG|62t`bO_Yvg4X=+fMb3mA(afptcH z9Ms4l2D}&W*@H!lHA9TCnk9T6;rRG$ZgUNB{cL3vV)be`H$1N86udjw9)5i}{GfX^ z(SuFUuxBsJbg(&)fGfDR-p_DKcUv5)h0+%yl5>!g;Fb3I=;sGvbB|UANIb!k3VK$g zpO_G$zrZNJ9e4s`Gj(udn0WSPn4#A>fYW}Bd*8Yy!Cx(O-c!bCwhsB!8E4zdNmD?k zr=^&BTFuB;aJF;fNm`8>Xvuz5lXboN`<&zl*j%`+-+=8&qxUa{y2nU!Ne92o)-lSK z(FFMHr*9@du8bqDucs6o&F!bgULEGpcs>3QP0)#;0`~3k;`wDs#heFDHacEl0=Xgf z^;GL)Th`4cB=2`=KTsLX zO^*R!v+V7E4~GAF|Gyvd#k1iPaILO$@(;Ns!Bx~V%bX%R`=d*zF{w#h(7%di z)8X(yIy3vNI@;)-{)KYA2OCNtjb*gkDMDo|klI^+gd@Ihe;xwt%DW3Cyw+98`Ldxu zR6dbE;Mc~y+0V6IqJev9M%}?1aoR)k=R=K>O!@X#13r}WOAr;Ii6U2HtYRImBN?AY_II&E{Jwxs?M!v7_Pmj%`gZS!4;!~}PuI~r~1 zC+QXhcC>VjCG2ccHRfXo=|TCPx))2nsbBS*w%lr*wCjx3e)Z`AOe{h$dB5p9T*mc)3!A(u)$W%n-;3HKfypzNGidQbLVcE4b?y5e5QRPeJN9VXc|)uZN77AVDn z0@)H2m9NL|K@rVrwO%IDXsFACww!l~JviQdR_YVkB#6%3aG+qDO4tB^4_~*;0B zy35Il6-iczp{Qyg_~G@ug=$qe#QiTV;Z{<#QHG^#FQeu1I}-C{nM2M^f3fAJofyTb zV{iZTHy;c?*r|{87qDR?WTzTiax^z=rZn@#huFEIk6I&~mJcXQ-WdtfITs&=i!qUo zz|b2Fv!lowLys2M1I?r_f^SqpXMEYw54prMUrvxEFY9#=9XmL~Gx0iUQzC8f?Wo^X zg{NNXVTv?!lC50b%>0ZvFzHprk8N&52DN!}Am&LZY>e^H}6=JGe~bf@7!(uq%0`ppPo~E!)l=*dj8-C_Yhb+IfBu=Wm+OC0@fL+{AsR`Y8(`90uiz-vsYZ;l3IkqEhx|1RVBm1P{3t+u_=x@xs& zKvnt0u^`z84=dlbx6bVpl*H5G`pKUQB9I}W_{jAhRz%B$kXUk{=5RLk{fES+&#ZMU?18rO4HMFVajje@saqft$7 zF6|T6LQ_6?e(Or}_$>Sdx={F7=}5%w3hA&!WKX_frz2{pN);jLcm^`N2V~_t*9nmI z6kZL}M{Nz3nI6KBh;*5Qx;%53BGGrm;j0>f%!hV`qru zFrCc`5}g5QR^zK{_xB_)fw9oj9?0u!g9K!`ck2phuO6=Y^xNzDY{_rRdzS_Yf9L2V zQ1IcWbfJ3_fk}=ggV+ABqs~GZ^Dcz`C+=1x1c&;!7hP+n1`0!^g2K7^H_b(5c=uPY zVFg!#9{IF^WA<#>kwv>GF*+)zhQ4C?6CL%L=OyH3F-8{2?-z z*Onf@BmX#FSPF@h)2Kjw!uB!F$ALCA5kh-uZox()$6QWbv`mw&v6IUW5 zPcLc4Jh7$K`2(K7qhgY&vR?7OGYanCuaFzqRbHS>y*M$1N;2>3P#k#f{I$A;p#j%a z&Ck-g;Hg$ua%uI}&0!E}0q<&hd%;6s%xg?@<9pBsL}k;l40cAkhBH9BXLEOa&h|IM z24&!{=W>pqv>#i4BcjcjwDrmo3msJY?F|kwn)bjLgc1F7<|VWn>}?bn3V#3$>)@y^l(1f}+~u%vG=p$T^q@`Yml zEOjqJp^OOjRa-ooo4lJqF}SMLSo86-~3Qv zf^0zuzdP5lmdA)p<0%OzNj(nsK^j~E7<@dmFh4o!p;gd7I*4EQ4L!YGFx8mySv*3H zhWZ1a7>)t9!Remaj=E?}XqUPX+ZLpK$}PGsI5hvjt=DbG2P}?CBF&uUEM$py1|S|L ztm1vmQ#7wODq_Y;#;6HB-lYtxJusHZq~w!#jUNJONSkYzsecg$o0NB|IeL>khl`Xb zQ&$ZlsmT5;J&YUpCjKE~!d=U>cP!uGLD}@Swh_q-^bz?*fOL{dRK0GJn47}(^90PU z-4wDExYq+|^cG?-(=UiU-*_69T5&LZQg*qz-*R@r@RCarwuKslE0`2-BkiS+vo47w z!CpU{x1`R;k~!0*q6{-1Ik{DlUGXV%^#0CoK(!+zN_6ZEQV8^ozYxF(LW3Y!df-^N zf=G7f_to4emvw!Wd%!>JLEJ{zf50C6leYY0{{>T*|5%(Ru^9^_NAVS>Z>H_tgv?PL z5)SW}()vpsE`yFSlUOkxtj8doaI%!@ABCThAGxrmWQv zxkqSXC6ozOWGnf$5hi+)c;_s%63B@vp#>jrNh%OO(7~F@j*leu1xplvZZAf(gvX~< zL%(G*a?pwa<0g`*7=KLO z+eEJF^a!<>?J@VoCVuvuI<(lb!~v;EPM2gMhPgHBM3mt{PEK!Kvd0|)DTU9c*WVUyIL-)V4>AT-fRl2yJMyS&gBZSXsO!3X~ik*`fo(%Fu`r(kdJ_Ty*1;`9ZlJ@hI}f9 zU)}HyjNDFoPOq#V$JO5~aU?HaF$Z?8vVzvgV`PJ1-ZM~=uW;%L5wpGmm_c#T(&ad! z(`~yT?#e)#2gXc%dx`p+eexC8Ec9ZvATT_6)~Wy~Vn00L5hL+7Chh!~+F7tBeM3fJ z8$z%g{#@HLw)FgvKQT?&Bx)OI%@icNP2|6KB=Sm)s%z05zjE=&e-hwK@7x|3affSm zkbfCJV4Aiqp}E?}Y!^s~C}e23OWMeyttFItLDn>g2>we=bC;Fx)loXpk};Wjs<%}W z5uaA2ZbnP!^t5cYpO54xR`z7e@r6;{6#t+PY|Hol`}vh| zdISH-qaeKLth;iA`k`Vmb7NYE5cH4_Zi)6eJqipcqk9**wq(VH*o z&2Jl=J<2>CjI%qe(6v5c?LBe}lFk5)HJ|SJ!(%ZVXWc1zGu9?*^6tl-4P4cC8G%U^79KW54CQ1AR?pdXE`5>tp9hOOlyxQ1 zj+VP?$q@zK61^nuJ3n_^4|raMuQ!I?PTd1Q!*g^i2A$rEVjh{az*s%pf;!ot)h4W& zmVm$(4}abzu-$U(fvzWKr|VqyTy4_qhxkDH#(3@*}RUipz+ubnc9r{O|mV3#nBneCQxFm)XgMuhh=|tUO6*hFkSY z^Hg&~zII*Bam9vB(u-BxNqhUtK$L@r9!XFYM`XgBDD&BaMz@!>b%ZRR`ko2vB`$@U zFnEZ6{Mi_-iqlJ_!iRaDlY_jjk%8n?yA1hv^>Di&dt&(_UvmlvBeCvz>i@-I~j1?0D}!glWxXg@piCz)v-DFTQ$b2zIo#x%XUWW6bA@Hz};F zib`K{XqXO_Oag1Pf2<%l)$cSkb~b#d!(zWyvx}gL67u|Cjelq+9fIePDuj5+y-Gpi zga%)3UQNMDj?7=zgv*adHzrMM>phbzx8nuT^2r_ONiF9ua4JO%91#dXv(bkyb(+# z#YqPtwX1^u{lY!hs3Z{Q>UXiAjU!Rfa zWo^%%^BseQKOSUJ2&msYi&=y0=fs0^N1A!hr?rnyE8FMutU?wyM-23UH7yx|rp+9* z*X%oIX9zHE`~(6h4o&7gkQ`LBQP0R=DnrgYmtQ(*rzC%|WUS-^{n#jD3uEm);2Bky z3BznG1Un{^UPAlYea?KB2`MG_04{o7egt=E8$vMi9`M7k{63cOj3mUCgp{6 zQPz&}u05sDL}hbBiJwgOJs{Pk8+qsSdl^HxpwSm0nBR@hy%fK_BKnLb9@ADkk3<-4 zQ668qRJ#IVa%Slm=n9>N(^kn}MQLXW(g=fN{+sE*8{_{j%@QJjB zR8O02(Kv*-P396Wbbe0N#)G?hr}kY&E+QKb2=pcCg5z{c8cpEeG`P@T?yhE|U-d2@ zm<5=H(Za?Eltz|Zw7NB8-ktsJJHt?yHR8ht75aBw3E>~$c0c$v51#ie5} zo7aBO+GYVY{Nwl@+s$E6fbL4`N|FJmmffk+FTJuNy~Gc-PA6gpLZ(9=y`59q^arT{ zp(NWJGRwen$10P1z+crnicDq7ic`u9(OMzGv{UM4j(i@Gyh^Jw6o1wLu)rbLE_wR6 z^gWLIN44G)$Es5^(Iy!w zgjQc|?;>i%e%87>to?TWDDjVg?m6?;E158F+_S`45A?YgVXdu6E{O|j&s@H{+XvY# zg-7zR;eqpI)GFf-fB2OPW;)yZooF5Q*z&wrMVF)`EMX3LM{@PAF?;0;rJ_qt1t%h7 zcFAn#fY=oX+~d(?k2j^}EU8vT-XO^u$yr&WFakmnS;LNCUJ_(CCfAuv(JHpKFOJdS z(rZ>;S7FV!PckYl(e0o7eDs`5Y3Ni-!8>BdI-QWigK*2i0wfvz&;@gFL6{#fEWH zJ6Yc?|5g8qZh!EJPMoA=GA70%{%O3s3BG9`=pWgb zAw`T-X*%Ix*we-nF}N{O%Lzfs9SgmM>yZ|F*fX*m<&*W-VD9uVPV4YafN4p4m89us z@{|<4wxPlu=Dr;fPb)CZ3Mv?PSg!|v{TzFASjZwuCw>^9ytm6$g|8w6RwVOOLVced z%azj!X;KQX0W;JzJIgm&#mE(&K0x$T|DJgAXpJ$+g0dCnuJNZ>t|F?LlW;oB7L$b}5w`u*wYg1e-oMpVkfowFhexO28nK1w561#Cbql|O6pEJ)~^ZY{RW?S4eFROB9 zLSDSDZ%wG^P0UK&JVkIFQMS0ONST=`Zm{Qg0dOMU10Ld;6#(2!-la{LQmJ2fHP)%$ z1D>~0KoQHOJR&3K;#&>_GAX~hUf9jDtAq?}Dkv#ZEw`jmnK_)K$9)M3= zgAwau{!dcRUd#io?~F5>xf|q)JnFq zrD>n^&(;YbBUXCYC?(iKm26?vpyfur%CdZPc5sOlQ?Sua8T;`$Q{r!IR%^3 z*=Ykd9ziH_I@2`0O$w2zZ(48hh+N2N@N?hV#ANVxB6&DN^-nc2GZyVNer9gPF z#7@J4oL>?3BGl)d7NH5)L1Vh52J@q{<|ft)^DV-eN5%{~tH-OPFynZd`H=+pY~^_m zwDggxtrl@$_Ukg4OlDMFVFTEXe^<~Hq=x_>%QVF8Su6l;^O=f%;gC*`8Hic@<8c)% z%LgIKTevS=sw-dE3Jf~qwRq^Kee&cd##T|nw0w^E85AV1C-kb#%yN0%nSBHvk>=IR zcYIZDaA`R2k(u4O(rugJZ28ExRSz#HJ}|dXVjd_eQIQ;OayqRPo#M=kDd8s9o}>;) z9#fQa*&waKTk$Tt=rkj&8?#Xz=*1i|vJL>T*i6_IUEE3_<={F!^T?#gLAL&tOlWY= z#@SAHhxD$w!`;aS-E`m(#O2}MqHZbX{D7snv=9XN%_z7rL_Eo(;oB2GhMt0vmxw*p zT~TTI*X|L>kwBRdPnCdY1Ee8#6=QE=f?|n6zH@wF0|FZdjGe zvRL`K#MI%S(0rlXib*GK|H`|`ChYkDBDafK@a+0X%2#Cl_0&xKw|b_~5E4zWi6SA% zce!!>6eZ;5{C=*sd+qf4R*6XM-;Y^@7j#LOR0(cQ7?~|8WvE?PI=bDXqO#SJOF`Sx zihf^#y%P#W0;l@Lkp!`$jg9{(J6qsZ0!Qv=jnURDuckqru*p*~O19)gR2ilrykN`6 zFsgc0`kI0TXt+I}q%Uh$fb`%GmFhG4skl+hrMoqc>^11x3Up)7lDy2lQyj9oYr`Dq zGBV`RN>fQWOQ8|m`ssJ?Rp9qBr=E5an(cZ(;APf`ftSq_s9KG}O$h(||1Pj&smZ0%p6H-YgiXh2?V?{`cqcrYb=fll?b zP0|iKD)erljIT<)*pPGo@WQU@YG?^!a@;rgsG#H&sQ#8==mWoe3dDnUb-R0r{+azq zdgZa3m3^2sg%g9uRUw6Kis7(PC8@`V#4!)C0h_|ZSii_2WB)6zc7pba6pC)!4h{^N zy}2ZXF|Im4npVF~St8!;sH!S_LL}~)zO#rN5;_F^;hFg7`sQCS_|~WBa$?m>X5~(b z=4LeXxjGCCr;TEN4Bj;Cia{IMIJAY39t4pgkmNeeai3dK4_}K#Sg>o$AJA%~i9Qb5 zG#E>T(=y&KdJx#Ip@|A9Lw9gbIm4f-h)6VcU4sksM#wRL7K5izCd}zadhw3VQ>oq* z^ktbVKg!rgaI8~Z32rC}lCATjCv|^Y9z6o-5Ml>156O=y`6%W4DO;H9*6l*_Sk&=%kME z&-+%2j?8{J8_}V&IV&BY*x}HO;eRTSvzIkuR>i<{u|8g3(rje`&kH9`6}_D zvMLw>3l@(g+3&BqIaT7T={C`sJI;->nMZVT0@pagVLO&db4zocnl9T%NUZLe6JLWv z;&t1{XL^oK9`}FZ@9TYd6Y;28*?sGWMZaJlrI9*7Smek=nLo-sRyz4Y@?ckNuD?R| ztz&my%ANOSeP!v1XMn|UZTYsab_@**SvLlw}(@~UVH!_gSL2%pi4OUwI*YdVc} zjOJ?6{?xixA!}cirbK_BXZ&Y~ugS56y0H!L>*-xCvpAkZy__sg%`!d()}Y{%ER;%{ z$({@&M$I|*wG!_mZ!j9!P=@6e4o}i>Y}ae~eVn4tlw>-k$hAaPVo491jGAWM zoGMNVVbcenk_V_JG&H$#VaD=^uLN@<6NtF{CZX)k7sM%WcECQ-iC;(h6Di(*+K?ko zOu~Ctt++69?MG@iQCpgT&36F98gSUZle>nlqjR>oULE2|Gk1Xpate5a9QoyFvMY%* z2faa5>><_l?P?>V0wnG>7OR{LPFAZVB%$*=cyrj<>B3D~;)B{(d!8p;kDb+Oqh`0V z5v-!KK0x|yKFOCO&85ujYRVwZyCuF$*|NJz{Y<{KE;2xyf_uwwWCX`+iM|gRWwmB~ z7P4%nIF3Z&((fV5HU`&Ag+M7)lcQXuuu23@@tItaf)C|( zP*Me_02P5H`{!@5h;?{jzx;=>=L{=VW8T(MB~{jYcD1#2h%oKksUIEr`yoCLd}@Gz zIj;_Py7UFj!s}9nHtrpJ4A&eXd;v2MvV%(+I)MmzgZ9JzPXCRp`PQMk^26?t+sb&> zp3n7j z*n@*PVrHCBcbt3lpGj7~P+L`)RdwqH2p&p$?9z~mftM(ctX?t2N-+kHS=$jMz;<&@akgSL^ypy zKQ6-ikCEaL{Mq;wzVWedC8XSz^|cP~@EHh(mtUURfLGAa5*KrZ}Y9T(lPqJEMo%zIOCerMy%}a z;*uE7D~;^_BtjAuule9k``#J(0G8|BviYW_{KwrjxHG|Q@&2NUuEMrHb{UC-6*H@> z4n61+H4BLWug`iHV=k0C?lU$ciN^#+8 zdG1vMop4Wk6JvmKF}dL?&hp^kvEEJ|vbeGk1yEl9T@!k!+z60_aA@8E%2X*?p_gnpNzZ|9Yw zX{{ho!793^1-^Mo1x~5K)oH$?R*-ZD4Ao@IkFlaD`w3Dp##Mngq$;afBwa2ysu5u| zg3uT5FYUXjv&v$fgW~i1d@*QYEvI-FLJ63B3g$eX>%@;WubUKpK3%dLAQjr5NJbE@}d{$;uaZWz7P^_B`#+bb40szr<<*dE#%W<7t&PMb9w9zaMFH_WV$CS zc<5VUM-rt6!82QVLu9VqXlD;NAA}342ix-N&SA+~R7*m?NBMPbrt3&(!7kw6oM;WZ zO3;PjF)y&i3*IBP8j&zC$AAukGAN}O)6}<#C61;>UE}G5nG7c`t=?*Azu=oPt{cLi zb8au1Fk=e!$6Jqfgs#I)OL}w7kQEF~bMr*}i;J|Y1~(1fO@O^`e2!~5p!_bgfz?cG zkrJtL@_b<4P5LsAW6F&Rm_pp-oFG^JLUmG4jtf_sEJdn1T0R$VdWOe0!j$5Td>ln- z+P!a1jC2}%=ZLb_b9FRjQ!Lp`CGTlR2LX7fE9tk%h4bb@j&zFsVU$1GY3^+fbITH{ z)o9!!F>GSOKf!m<(;a3%Hx~Vnie3hA){rCw} z*(m3r%r80i+`_B%G1p(m?V?yA6Fzes8<U$$JObwrj%SW>}WS4;d7Y`SFbY3S9{0yepQ(u$~?^@p1q0bEldk?gk6A zbdb40%uG~eB{+UvU)R1uS1}u0epGxIoWx==tGF(FHmpKvW8Mn1UT&x!GkIlrS4FpS zNGyNv>31iT82SnChY91hk%T1GxdS1pLZnoXPE zirdsSx%z&Zwv5vx6GxPqcZCr>RD`azR4b1%#~+fk!abPlJSx;+){`^)#3d4HjHKXG zDqBPP*u5IfV0)nCdcU4$k6cW?e8`)&F*JwX@QNPa@a?!XYHZFkviAHEq`D{>I3Y0w z@piqS+k7L6PrvTm19BjYsWAoCQdurL%t=f02vvg)Y_l&!wGJDNPMmBVigg}*JZB_B zOKzoFRh{eIm(2*rJdAqG`5wL*|86^T`Fi}u3iq>JZwSv1WEPuW z7p;t3EtYCbTC(DrpC!R+eC2vhS6^PdLGQTXvxWZ9_StO`QRtn2q=HpJe@_|71t&gz zotef#RYGKD`Te`-Vx+(r)S&x zdoMaZ$hvhtNWxQ=LrmFyo6>6P3wN;xr!^RS5e3Gp5Ot&RV;o|XQ*Gni*zSsdK1qZh zlNx#f5(R^)B5V0axe#O%3w7=Vb#;(Ce8G<7$VlsIsl2u?R=40`0yf6{OTO{9F61)< zymEQ;57#9_AGBJ$GGRDpn=w{(K{78*3pe$V*H~qVeiuiVU5tS0BgY54PmLBp1#kgR zJt7dg6swS1vO$`rf>LQnKNeF#7?g6%(L!yx_f`;$^gaD$SPe62(hPhA6`oMtq!kCJ zkW7~CDd4grx^HAz{Z?ziW@%-c_9zxKo(?k{j#}F;4gDOKS;JN_b_#fD z!c8g);~Q2KtUttarU*WEse!!}Hwa#LZ@;A8gANCJ>eh?zE-`z7{@W)JbI|o}%Mw$Q zWyd2#|5_*7+Hi9yem=s8t6Y7-09`C57HvwVhpn@_tn+MP&>sJa7cFIIINu`yVq7E~KUxFo6HsJ1obi{us_3hSbZ1lM++?)ER+xsbG8a?ym6rS%Hf zv+Zo;gnVi;715~U$4Xp?feY((Mwta^E>5-w)w*?J!9}qz(mY9~!Ra32~tT<=eBi-m^mqb5g!VZYh0=dc;7J03Q zdv`Z*v*w;yD36GDBIBp~_1)$cqRnV0?cb+d?;hw|JcysUlzr8d8H`J^s!2KEr?p7u z9V0VzW5yRUNyrVpxyEzb!eG`so|85=VU4sWZ`9^OCN!J4GY-qHe8Kcn_PV;iO^I%SC+#+07)6zyGSNw3$Hu(Y4;*_{?rXwRAU+vB>8Nf^Sdy9jykXDuWC*>4Ej7e&PTStNr|* zN)YSf5CU+pzu!Pifs1$6b#TK4C~*lu^#Hg$KKlRwqTklv@hNb&5`md9u*wKI05nnq zKokrB;8y^k`8oi+xdQ-PVgT@68UXGq1HhIR0Q7@(Pe8F3!G@h+ngQnDfoTPpPY1U& z5IceCXJP<&24ei*)_ble5cH*Jp0-UT@xd`}q3# zhlYhmL`Hpxj!8~QO-s+nL}h(0C@d;2DJ?7iR$Eu!(Ad=6(%sYB*FP{gG(0(lnVy-Q zn_s}LZ)|RD@9ggFAAsG4;edDMujO~i{z0ybpj^24_;~n)XL8|yKDS_ni}(aAJm)CH zRS1n7E?wq*MMQZ&Bq_g!n3Yd;4QlMzMMA}Pdy;+qOtjx5`{x9E{ih`RZ^8a1*U*_H zIKPQA0bV)gGj!qi^pErZGl$7d|2&5&!M49ROb6nBg~QBX{a+k@2;yHHehK1V9QFqB zA91+O{I^r^7l*_p hhvh;1M;!LG{@>y-4)_Gc`S2sMZEIprFt%c=scrl3e;>}neLCx|v)A5d zpL30k_aXNkKw(=C%jnB~7|zu0Hr(y)S2?buJ3g7P2|&eMn=zug+>lK$VOs8u z?H7`n{6RY_Vx^qA&9iAKS-edEeoyv-jp6hQ39{|cnS)ZrwyD$2G9A_qGl!)ymONaE zc!)*$;89aYJ7}Lk-pR=HnXh#v`2~cr`qt{$Dd!m5BunfU=zSA@JO5mUHlZU#;FxYf zN9`4o?y>derMM-NU_XtsljYi!!sG*J6HcgsbQ+Fqtex|XtJ%yg$G~afRfoKA^-edSS zY_{go0_vmdLa0{tI;96GO4Vw)8l0-Xqi^kT zKqU#GLkr*v{GEcOv(2Mnxl5;;1%n4>(+cPO{%{|q>-m4-HfA33|2c~-_#UV<=UI%u zqcg8nE*pGgPP4rG_D{ZR>5o7wF23+XpcH2{TgS(RMM?4Z{=qm9R_fM9q5JGQ+fm?- zN)Fycka>iiK8~tAY&|&spTkMVE!=jxb%+#Rq6(h%Y`UoGZ{f`3l^Xx@tXgvYg{snu z+$PgHQmt3RU_(RoXyemHcr~~2a*KcMxu)Qb#JZo2xn0-(-PU$;nyxnGbjmlnH_P?x zZxm>GI}+P8+i{H$(>m5A!6@jY^bAn7L#Fh@Y-T;KU=-C{f`=nW&ad(u8WS@8OWf;& z3ZvS$y7rIUYY%BJ9SCXjFOMy@uXI;evd*iJLTQ?r)gP7>wA5|8g<+b9_b)2Mm|UE4 zl*gNcup81>OwJY3(DyYJn@@Qhcl3%_1 zy{2nVTYh~*phh>a$ue3$*QqfvDk96SQ8^lztJ`=tc0Bt+gHdFA*87s#(1ctIr&wo~ zyvK@?X3ZtG>Z7(Y6{-5p4sI1^4Er6HqY9PHtgXB#28V4Fyr=HCdcN`g8h7(nyT4UJ z>Yby0#AJhz+1raLM}wTB9n;-{U9;lz>0$30qszGw)!j8UBT=vV>+5F2p}j#h@Srcf z=c^n;^xH2~{O~7~YL?mi-|M}ky#|;i09{hV^QN<{q7b6EA^QgiPn@pxb6DtPxvekw z2=2JK74+=b8}n{t+t>xORLK6(TGJm;oAFh%OOWRiE#}%V<%v3rV+iv}N3%TS)k#0| zqlm{dP)nScGZA4Sh+3Y~w5$;$;CN_?*oZ8jcyE}37{|5g zh{LfX&sF&lTEC9oFGy-bLcvRg>UIa7f^#~KwY`&AJ#~Nca^9JKhqg!$ zE9~XnlVsA$W`*TiZ)ybC5c;E6|HDvsb&rva>Zi4njknPBrMi!uDJWA&nSY#SyXbfTD z%T1GEhbg)CO2|}dx0j-5Kdm4bE?&TpjR-;mX|F?{qVH0S!y2TmKGXyA3tkxZQNx}{?5~J-Bp96v*S3Hy$I;9hmdJPmsf+w4!% z+WX#VK&L&J9X`rrJia!QHhcJO@LWCZ!P?c%JqYX?ZL z8j#ry))*G1wz2g80!9kD6~Eu;DbOj<2)5bF z?E#EZsFye()*2mEs)EUh6CQY}ajJksUDd6risXTfbDLZju9~Iw-CaLx>pLjDx#CP3 zh~2bt24h9GqMQqQly-yEj!)v=S`ub72 zLn$Wm@&Aqbnsvrlj?EcJ#8GfFMltEhq;ivpoFq2S;zixuVwL?!>+`kuw#qG-b%KpX zQ{VCj>*;3KMS!hpe!-lcIkqcVNlHYI_|5i{IB-hAtW30Uf^3y2syunjb`>>*J7N9> z6*w_!!b0*Vs?Fw+VdFq!3zW#%TO%*gPq-*UCs7veo6#Gwrb(u0EP4jlZx$lai*q%y zlsY_JZDu9=W5(Y2qKpjgtEqv!)F-N@0wb4-I2 z$pO;_N7u`3VzoO5)Ilc0ODC<2^DrX?_K5cbQ zBEOz_eSW9}!>U@&Y<$GIwW>B;%{{l?H~pD2x&Cl!hfP>D9i1$xCWq6rCDJt!C-AeId+B8G}8z=TLqh%Sf< zSr=&lL6fBr8Iaq=TaXWsUg8AQ9U4jpqL{EX8VaS4uqA(lOTfVtWppz9DXB&IgeY_7 zKV>57)tINt9m$>P81hfMPsF3kxv?qJ(wrY@HPhSk$@!3($YpTD3sUI@WU88oU3-rE zjn`U!+TJ!3v3#!m8a{93V1F3_z7{jufzMcbF@YlS)&g*`WaRq8Q6r-5%DbLzLcpp| z4}-A1mO7|QkXfA{t!Djv{FjES0v44!-gbs)cw8emO391exSWJ2uTsB1{AK-DQN{4c zLRx)IZ35lh$G?(~U$mKx{9LzRZQ^dxxRI?&l_t^Cceli2G|5w`_)#y|O0G$=G12;2 z(^30J3j6DrvRS}C?e2;V;2T|+)hxiT+K95lB66K3H}#=@ZHsE&pwj9P*K>%8?8LNp za*GL(#h;b5Vxv0-wO!Nm$1M#pCFUf!F|kUV_QT>`y%by3%A|wKue7__LEzUrGgNk;mIS^>Pws`tO>!W{Km}%;k%xiObf5bt}w8drp%LE7uO!vdukVzuFYe zK4Q1hoXnE2TPzNt%UN~QuvN~2N~h1-+(rEu?J&9sD;rBQFM+y@Mwm)UogC^n;=r#B z7aF>PLq_O^dhmb|qP_wYH=1W$052NtRP#k7jo|g)z}qHInVX3z;sQ*RL_^074aX!5 zr^d`2q;KJNO?+kC#w%Y`He&i344lW+R^NtZkzQ?DUGXdG(n>P&n6nhpx~7mU9o52AB2aJf5G=iG2)&OJmn#p28A%lQXtqh)@3O{ zSR`Xdt_iZH5c556O2SPqV7!9FQKYOlckXA9jUwG|YpIlIez@;4aHX zBRZIGm4gvE^poKmH^*pAGuPcYRHZ$Y%qq%>?WF4Qepb`>0r`z@cpn19(!S!Vjo>NalLqFPIy-7! zU_m*qL|DJKOu~pS`moqXY(j9Rfh40NSli;IU?Ln}(xoaU(vq4LuP9}Z5?Yb1Vwo!5 z4b@T0V2_FG-YQg|@iL4qze!~q*VJS&yUn-i`D|0O{x&ZEnboxpe}0uU5c_c6(XO%Y z+roxDrk}a2;xszQT<-QfFz{x@E5K$*Z~bU++fdQkty?w2-D{8l&7o5(&Vk&H^9zAq zs5WK|*6`NEnB!O3kFD2CMA5}Tf2}Ty58hG_ACQ-e8BQNj8S#2ocuIB6&9CIW+C9JS znnbOT7*Q%6L*}{jPQ}_8Ta#4l5`m?&@V$>A8b^gfyoS;Yd(aRj{VSo zDfVi3)1*MQbF|l>PKt@sF$zSZrVLEw(f+txgG5P>$ywta@qWTS^IvE@!Ni1u{)^vd z9xu6ny3wRm;_qakiR3>NzcP$PS5EF}^TnX;_2z4$fz=PPW0h{UO%q?+mybSOe-@cB zy}qTA6*S|xDU~i>=P^0zo|twj|DYNu%dE8AAgm*P_>A2)p_g57Cy;(|?nSyhD`~+g z>mt{3YoaJ<&iJu>UBhhnqkHvfvr-RaJNIVqZc7gTna^2SA6Mr8-MoSQ!~Ol>{-_g^ zb?q!e)C!cnOJa^BPbdPMh#mARXthcNwZ0fK?A1H-D{(0_Rh=I+FSR1{qa=hjaC34bOCJVVag^-)J?r|ML^RXLkk)Wz4&&(R*2 zF<#2onwc9L=#ZK!puB&BMJCOU=W~|F)mSJa%U6{Y-Sk~P= zi?IkA9rB=p`|ba$B?(p>)HO&s=KoeM}FkzKzT+&pq+^;@v&h}}xU?Ulaq)hPe6 zx(k%+jzQS(A$rPs6%}e4;;-)<(19b5CB6<6m66Oe&pxRd7xbj?lIjzGpUTe~0g>a~ zod(HiX%ix*^?8XzA)BPKcl0*9!TP&Al;f|~8Qw$ZgY9pBNkp@VQG zo-%Byo;yN{F`vt?u)QsIVn!>kOpP>&%H~VSOgk3-5Q`%TRCS0okT2IdN$_cd?Pb#D zjP${IIZ0ObOuJ$XJA>Gw+{wN`Jf~{FM2!z>&XMWm?{D52du`J!db&qV$qQCH@J)Re zRW*Bpav}LYj{LT4 z0-kP6Q1acF(#!p1bZQ*#c}c+nr)2t65 zc&K@_>u_PUYFO3L$p@CFx{TILLVE@)w@yXqjm!+2IcoRr8Q{f!biNUw3VfMpMAm`i zDE1fuQ4(cP5(Pg%4HXxIU8QbHtU++J2U1{Y4gIR*OBkC`D*h1W&gzxk50_)rN!h}a zxqH$Jhzy>Fj2PlCR{>*;qVW!4;t<~4av5!88~Z0l1P)+-kXL}sadqSns7U5r={2M# zt4{6-(uOUiXpSP#8|6h&&E$TuMc`}VZ@n%!iGHem$X%ZM;KjAROpeiW8;&C*e$Scv zoiei-SiE_O4dQ=a8>iU9q6@Ma_cPK?~qLnN^BfDKD}jJ_OO=6QI#d)FEwrj$372ELEE zZv;0TVIF@RPmOO_!I%3!NbwxDvXCn-Ch@(`Hh$#N;+wHqb4F>MWw|7>S$}CBRoBU* zDV_rizFg1di{BDyHeS>B`xbdN!%oS`LRHmIASsnsw5E`suGgBcC!6ZjFKXtO`D#qu zfRkG^1=0&Hc|d6}ldrtbylLjyT+KUc`KTjj*5Bqvck!IRopN96Jm1B$J9XaJMXDod zw%ci;8@q7T`CuEYjPaJVge(VsS0F(aGj889m)T6;EnCn!blaycTn83%sNF?hHA!hC z%ji#5(sa6Icu^t6!>+yBn|~7hVN(^V={`?OhufNERU6mYmp9T`;Xs{eb4?q9V6Gp zdPs~=V6*DU1Z7wDIocmpN9HCiQk&1ZM9bDY&z5KV={hqMiOkj#b;ZNNi{>{ zum|N5;7|JnWrShhyT>pfXj@mYxt?aSV|92p$8(_lPf0- z+3MDi_kkvK`^f8q*Lt4I+CjFu`sI%ybg-(@_E3pIkaQqCcu-%;1@^b&my8tjOZ8oa z-_Y{pIyFbwczBi>32`*JH;65X$gWGKE6nxn41g^>N&9#?K0%Z*R=_QN3hWL_b$W~n zH54uyi@S76Ko;M9K2zWaQ|wx?U_Dnx@VsCU?}&(r;Ct?_$eeHik9R%%h7UVMp#SSZ@5P*C2?tBQ`Om(2H=0>pcYqSPM1j*=HFr+$DZym+7@aZdZgquGCzaX*+{ zNp;$~F};sGyCsA3z(=gB3^vYatbkhWr++Pp71Jjkao)u|9Q;Y__RwrgA3E%~7g*@3 zB9-EwWwi?>X1_@Ck;_cmN_>q`FRxNSXLZJTc$7x?Km7qId3Rt|36N%LaP3s}{8VXv!w zN{dr2DZR;ySl7eQ)A|MCQRP2N6?7iol6YSwnu(eez`SLb;N|5USXXC`Vq92r_$vxj_E}<%Jdq_$D7q=b zbf6qkhcf@t*qWD_GxQq0FU)Lui9rGj!uVhy$l-A64LMA&`fjynostTwV8@!vFc9c+ zT{-+3fZULavK4+%4M6XL>nlC<#>8Qb2(^o-;<_SHO%X^{3rtVQruHVH7vNsG274)- zTJar}FLa{P8Uz%gH!xw^fXucASf+?$s~xBYnAds}p$aVRG8aWd6?=!__aG&W$1pIs zRmxMXBk-m)ITa_cNA4rHMoB=sUgsfG#`ylB?=I@hPFt&+r^$i>&jb}o+kjjEpWzJ( z12k}&!CruIz5px-bc-_tw*XJ^(J&6^1Ah`h23K=?;B%k}ZZFIo^o9k3y#{;J!oV~@ z17YBLsIVAOKrm2fgSZME1>B-s_?M?OB@%gEWQF!ftO|62P8a_S{YeWIgTf?9yW$BD zf9e?85&DA(kcx&qVf;bIz~bolCC@>Z8Tx1mNHmi#35T|@o=Z!@Fhs>62vc#W1J7z==kis20z@Bc}U`DUC|@PGRA}$D~U`c;>UP!=Zn4 zG=yZMRs83X%LO&VLiXd?;MRBA$t8!!7WFq;YiK`wc(o+DutQdf4)L6OK;pyz$d2Cy zTnI})H2r+bdy3xjih0iOQbj-6#OqbP4{Ol<{&3m~HXc0SzBpI%yT5u7SCY~HVDUq` zN0-T*P~^i7-B}HnGvy;A{zk@;yH&j!qj!-#K%@3-f$@KKeDNqz#`s6sBTAFmxM#xm3ek!0c*#c*0{%}SoF3k@k;Hcx(DVP+=qH;3wT#t@5GXZYhQoK zlCH6>>nf-mcWAdWY( z%A4KaOWT!rH*cHkSIT7{H#nMq*IE$8Nw{WFfv~tc;VmigCacx;v-oZi*YuaDX!$)! z7R0$)@CyCLqe^7~uNw-rem7hMPuDt$I0>mVmw>i`4;l@DiopJMWrK2w?XpG3bJ9Io zlQMFEza>4M49W2J>9!*d*=&L%QU5r5`o^5_6DkLERpc^l5`wlHY5+bXVGyl=Zi>I?N8lamd-M^=`F}i{4UMBbla7E@QIno`F}+%E)9PRr%|3^Y92hP?n4O%ypDMh=Q=46{Zn+tOiAS+le@hEfC`3dt^puN`%M3wzG~xi|p+t{h2HD)_lTswZjAxUzMfq>1FPy)H>f#J*O)utP!3t`3$VVXZm?h)7YJ*J`eUR6BABX=$h8IF`M1s8bW zKCJ(nYqfn~5wlLV_;4=dzAi19!8+Y<>1E7?`%YSIC69MaXsv%BoEX_$CAT*Z2d(ty z-NnW)6oe0Uo6aUVn`UHVQ*?(T^jmh6J95m&r*tE8Z_LOU*A}=EAjZe?JMpdho<*FQ z7Y6%^X(SmFr?PrljHzA~osntbR)3IfVQtWg;H%kBb#%-(JALe~U7)+}^nG6r@%YpK zdl~Ja-7~t_DiJ2eGI|{e8_V<=n z3JUBanH`DShdXX*AN^n?#!BpVPupSR7eTSD=X42?!@ZA<#S^`UT1^e&HU@`H#^Q7b zH%))Vob1~$-HKi7cQ@fC*$y@ut0&s_-!yhgQ5={uLEp`pOfYMyH_rWza+=TOx~c~= zY4oS6w^)|!SzR6WXAal!3P+0bz<7{7&*3;<igDpc$q6bt2*w57fYUMc$ORc zSjfuOa^!NM~BsY3285&(N4oz6heevnez6u=WSKJeM}gXE*;Z2KPRz^vPnF(6?6 z=a`$i=ZRK#7}o9cXTgooJ@Ty3hR8?iZQ)p<4aN&lB%q1y26+Nf;=F}`fs(TyVPQb0 zITSb<(8$vT2Lj!B-S9D>C$ApS1&U$*g#Q4I(8eLRMOqjt&Vj_D4U3jWIEj)385m3z^GEWA=y)5HZM{`iJpawkqZna*~}Y6M^Vr z6J?y>JDgl8Z=^i$KTIStgiDk@kFey5%H|^$8TaKp5c}yx7&KynX)2eDXrg~rNJ7}q zAIUi(4seAOGLYdsK@~Y<1{<#=ihRis6W;?Jrq3DZK?UjBos*8qI0QQ=u%kzz|D=(8 zS7ymK6;R0ympPPfguBlx*}rk(8BO}iZ4&*8|wG`T14LJA!zKR4de|?&g)lHjz+ImHud5! z?-&t;$!S}S<8P{~CTl&l8#8FExQglOopaMRRLDKWB~_C8?)+>qE@VBnr*x3Mw3Zmz z1DQv9^E)G0JU3LrdV7tQcPeNgUGsTL`$(DosjT&p6$7nY0o;Zjqp%zQ&gfFfbMmYS zqSA?R()>&PO?J5LVmpDi>EPRblb_@;-ex(Q?V{B2XP)Hx4lA;-&-F+TXrAc-#R@O* zd>~D7JY~=5G6Yl1Q6eRKGR_9>$IAbvYpyH@U|oKXNWXCB$Wzzzg)3^^QMmEDR@#Ye z6L}Wl3E|^ptDbP*&V6Psw-9wtbqj-@H9yur9r>xt&*X5tZ0BubQruX_Tcg3~s_t;( zs|ilnuO=dQ|24=a*z|?b{pQQLn-k*}-;+;H4_c9V5u z;uZw<1s=^Ngne~Rzy-#+vxrNU<&JE&j0mw)*6SuNa+L1r(l)sTdv|y}oJ)(H<-MH0 z+zw}59*?1?Q!;ml@JUOI@Y)9=p;mKLu;s?3B0b^GYtzLknk~q~1zY)F%%js0O^KHE zaovq2TH3MAJv~~1N&ALx>j`9dkDu31&e@!lHMyE|U@FceHoJeaz*I3$cB<8cQAlc0 z(}Pvx?8~KWN}u1r3BrpIg5}q_IVM-f1)2-25zPY18Tw+wH}daZwDZLj_IRXNc|7Ia zmV73)#>f-iFCxM;0XP5|M8Z8v_0B%Kp zDCdhz;fyK_AUl~_a+`>o^djZ|kYL7&Trm6$H%TQG5<*jpf2%+#EO&b)j*iNcjuMay zdLh>1ZjVK;o=x2vkeu%b z6dBZCXmNj?j~QM!6^<5bZ&2?`IzFhSH=lzTduiBJ(1))wJX&f?$utS78l?-FyESKW zmaId&uFaitiN`k0i+ikeljqO7Z*&3|j6EH?_bt@9BNmUjAH*^jb-lLh z5bP^1U-B80#}3J{^+UcEPOd*gu?j|_^T%e6_#@U}fB&oZOXxUa@FwQY=(dG>eAL*i z`SZkElOL^~$G#r{S$zyX()!sr#lNveQhzOk-ty7JJlYEzXNHVnb+L@LqMvpf83iQ& z7;ZH6&J4hXS;!Y_6X4b_D*ljFYy`5csRfqLusS6TGHjmOf{?KuoyLhUEMwWs8CkBd zn&#wfGFSn#UmTCH*XEzP!&rN>qu%-qB)91{hMqoao}S0NG$&UU%lg1N8-!-}QfUJ|N6+X=XJc_#-OAk8la7W;#r=2>(=(-|1dKVLgpQ}0t(SZzEnD^FSCjeXutNU$ zqN#0iiMya|qfyfFh9g{g;(^@#O-O}(|Bn9E>l5et^UVv*U7UEc{s z9oQAhTQn8EM-D_Q!Vgf?#pa;3R424Nj^ned>@p2bYQ9OdI z0m6`%AQOV}o4q3ME~>}*j`@p}<%G*sqB__J%z04`^Ct#}pwa_mk)#0xNj8#VBu^ZrAh>nZFTb-inp4kc}-Mp=zzjONV2rk|6kShp=~}|tFdPK zX<|W2VZpq~i6ls_q^98A!Mn{$RWX7Nuf?1~TfAB&6!NZ3NSb)1Q99^4$b?(9-&Iaj z`Qx>0oGW*Ut_}|~s`}pO!!qZwSUus%`VB+u__)AoR3)P8F+VeI63dy-$(8F7pC^!kXG;EctbPUyBn13ssA>^+Wz7u*HklZkH{{KM0ED~ElhZ9H=SqP za@`dl|hWdj?c2`Q!3WX z$gk}V#y71yZJ&u#k@5!t2T5vSIzIrw(2Reol@qTyl5J`e?>RbX+7SP0oMxGrC^>3r zLW^}A+=}Q5dDDTY7!I;&8SwiQvD6u5^d#1`hi9A=AKgzfIiAWITQK{Rr#QW1i7R_d zX4+kTIHq~vDgDVFXJ4xCa>H?gk{JTF&<(y zv&Rg}Sz4TamoWMy_g=vpy7sJi>v6Ws+EaonZ(;4qlpNQWDSK;gR+5O)W^r@E-=mRX z7ylDDx#v|WG;vO%I5G6QTzNXZepw$9=hN~->t;Nn$5t~Wg)!=+@0#8}p=BVQ8#N_i zgf2dXe{I@Z+(8mG_b)9X_S=BU4w4{tipB1vN}IOA=am1fHH&j=o3cHs+PW zFD?|rp8vn1#GL;hef2Cj=yTW)MXr9MYx@m!jJ?_S0fHh4OmRSi@Dct#;1c*DUj zl4d^@IWH2&JtTY?Xu^|(Zh>xa)uCoUJUbt_0XoF40NMh+Fvr1JzR)k!Qpd_z{sMsu{u_ zL?k_dGl6f(&qcQ&qs$J8Iz%^X};F$8-=sg{61 z$BB=T5zr$fs^}4z5OqcJ68siLLE;eX3QJYG6zRk+lbJ@P@@!;}Bd_v|Wg-y_Ua@Q% zYKRjf8-zN{9>wsG((Gl~bD}B?C)ppUV9J#AYlI>7xLgi0ib0T@L>aL>6gyDII8T(h zqB5)vg%E@n{fWFGWSkkVcoR{w5U(CA=HLDSlO`ONFH&S?M$C)u`EYAA37cbTz)RIi z`ljCbB;oKZl#d1UR}%h$lY@qe>@bnPeBs&E;=2p4K>BB0O$oURPT{E^<+< z5g|#t11p=S*e*|d`uLX<#Ic=oPve$)GndqAHAes2Xe5r{xw`?gt)$XDrIl9v?5^YD zvB|j|RVrq)LGHI)Xbs};vjcRYXEmM2y1&emyoGuOmmGcdyRsMh{PjDB z7k7NdIvN*#duFvfo85C8XgJ1`cd@GoVB?%l7llyHIMgL(4Fp;s13u;aR`bz)gH92+ zg>gT8?vRo$Wj3%mE1-Z0DGhTvLx>ip?&SAOo$lp2g`V|@~ma@*su-Er;oChMz! z^A&%ZmGr$6AuYpt4YA|hSG0WZIu6lvHO|(I-B&&@1AR z)H8)5kd?HE1(RlNe2p!i9k6nA}@d^ zd9@%5&>-&|_y@3xrvo4(^%KGYcmh%)jPU;yD(~y2mu04Y(AHxEUhBo& zCfW(9VjPzsz}gsT=n+H^ zMJ++tGk&NEh(1mZ_8QtS`3Z@Io*`1v1o#8$LkUyFSJq>+7BY}|LD~^v!ts%*MSbIB z%5{jD&_tx05T9v|GFRclv<5kA_*-&_oF&4ZuqAT>c8pjg;{xeWC#64#U4N0+nx|w%BX3yRa5sm=YP9#S+kii~gFtYN;%Cx3jmCVwc)FxCqFun^H!tq!XQ9dFhDTGL5tH(RWAqgmM)H}N>;t^(Z)v)Q-5^aU)$ zqyT%}7ne$bL!UQV`{Sl^cbCbb&bSUq{&f$}p00Th{}=xzsw%!UeddeL{fm3Wm!$mNv1ZFa&p*u-bGB}dWd$^f zZD;-wVw9a!s@fFm56PaxL|%Dwr_02{BYdkQMk42zy5U3=1MH2YsYLh z^uLw_y^WZhuD{0RY41i8Ep+pQrwuKSmIM*=t$w!%GN0RgDF4a3WSd;$UbZV)x3azH zpsmjN$zrJ$@(~GzTdiBrU+2TVef!Cg+hQlKd*n)29yL`fU1+iKN~Nth zqf97kdgx7AOYUpH8_+3s5b!k6g~I}}zyb_{@V1B|{jZ1_;1Ru9ganM_Xb6u8YjXm@ z&q3eWa7Zc$&*p=JL5_@c2n=XPEC6N#M#&DK0ALht8v%h2ziXE_9FcLg6udelb8T1*yC`5O6{AGAT3Tv;wKR&GQlJ zWxiN&zeIn5P<57^~K~wlj-g68NbnVgZzB+;?xe zw#;Jq+4`$a>bUFHsh%e|=k1jKfC<5^Pdy$(t!oF$F7^Ld_DcHJZ@3&AJvqQz_Kbpz z%&mAwqQ;6=SRvmg1lDfFnh!cI?Z0)YSByVwUsv~wam(gJ<4IORwN#2k-7T2Atn#xKB#$KKR_Z173%k?Dc)Z3P&!R zo5mE5Vk}G}9}n4^1&5mr{59E&I67Qt_As^>ch1H$QEN=m>P(XSsJ0zAe6!oYyyf=C z7L4JsC{E99^MEwnv3pie@_Pv;Hn8%0w8M6;&6~^#o6qIu>^HV?HO4sD|pHzBuWI$~4!P6so{s0SLn?C9E;hNwprf6{%QLo}ELQ(EQHDPWPz? za)0D?$z+inG!_Bdm4z1wm(ojL-<%OlFH0}TlS@v4)X_B;q8>KaX*4CO^vmf0Qr}Hl zn{4KV;$N9ro=_(hi zH>uZ0PP?A$Pn+KzH|`taH&smcC&ixAOl9=KUWv5P9mJJk>(tMp`(OrS5CRGLNTear z5G#V69Z+iEj9`8!*>DA9loZ)qj8q(^lpZhPFX~Rt5En*_Q1Zox zks2gHQG2)p@uw&bK1H2ItH4)Sa*}e$2TTVkHDm%qU7`ySPWz13gwa_||1i72z99P& zRmdXBr=r-jFBlNAn>;0_3U4E_WqqK(h!IkEz!wN^(snTOnX^)Vp--nxB*&p&@m$$4 z#3;d2CLXp+Sd;k(ktLQ$9{`^qKa%k{F^>CM?RhRv(_JW@ zwW~RnG5gr7t9xMKtj{Ox$byNFdvEk&fVXD*B=a_jt^fEyhrjE_c~80K1nVpT_o z=87>%gHGo6W7Y>k&4Qy7de;qGldg@Gneh_!$4*~CvEj4+L(R8y$3MaT?NM@E~uAdEh zP@f|(dSN7|_WItxPtG4hEk!j`@YQ5xbS%2@lg4T^5PMh4Ai-{Qz(^o_AD(V5mGgaO z$}BD8>a?Hvk+hxhIP=v^_GCb$&ydUdA=cH|>KEeo3>K_kS+8+=!JL=^p@^#`ekut* z?;KW<{#qwaYaJmVj{jeWSgorW3C^VIwjS11&sOQ~H(P5_EqrXTIsZlN(anUp+pq+Q zSl(q|A)L$=5dlMjSRVlIAx{`q00H28#v(uiXh&-m=>%=jcR(Y+zbqsq8&pcGhY`V> zq!z#mFbZ!k>?RURUIhj~RydX@1X_!hC+;8~&VG!D5C^tC3XC%Rout^?WG7kMNEI%z zAA7yB(GTjmi^~i!qn=fELq4Y^LuWvlv>zyC*b9apat?~2tRp`|5M*0q73{>6Hta6= zF}_k%1b%?iCjCw3EniP&0n^WGL$6>YS>+OG5^!3ygdJj*mMO+Ve5EFcIsK2MtBh)^ zYr28DyHPCefrJP_ihF5scXxM(A}wAj6ezUC-Q7c62|?>_PhF|^OW*I$th>(1k9*IW z$(@|-A#nV=>(REiOLGv}*%D@MqAMcsjMWz>aD4u7u@r$_P(j793aA&yYx-h=_&- zirb7TkowHW2~+s220=%c4(y`#V7_Tj)%q0Bs^WlaK`CsoqhtXQ zfo*#so(nc;J0uD4Detgd5PJ@Gdo9`c2lQ#KYz>F>MXw%-TkrjEH7S1Y;KP-M#HhjX zmCdoOBfHnqV=s;(Zz`prhGkZsC#QFnFaGDgt-67I*>Sz9lg)D7-W)GRdx)A|ij+OO zoAZTp?rR-^3uuqRu6v8*Kwif;$#Q^e%drJL&-XRa0yFoq)Qep~mTe(hi~4lVdx!b@ ztCSe^fwTAYfahej0S^wZ0<-{!fnKt3!0)52|2$BWg_PaNdk^yGAVRR3V zr*|sYY{~mRqUq>bSTgb2ey(VGdYj#Ul}5C;4xuG0?00S>9yk4Mfi1op%JuOEffvt* zsR=^wSH7g&3I9;jp(#n0x%xwEYqfjF2fgUAJ0liVkS>qeR`NncGG=2cuUKA9 zmX|wpA%1$x=`BV@c(a{~4aNPH_L@K9Zdb4CoQhp(n%BRUvec_&{2+gI^tWYY;p53X z>)CU*qb{dj7R-)T+O1SpFbhi7yK`4i3=5w7`a znx-i-&9?9Qv859A?%yftwjF_On@N9HggbGywjozlpU`Y>p``MA5UBDQ4O&2|77=%d z>R~G?Ozsd6Ddp+ODd!?&cx>Pym@LNvv<|Wq1kMp7+5`h6SP_RH46y&gm}eqBv|4<@&iqt?yTROy?Z@cNgi0q{AJ1B1f*`cnCJYSP zO+#ZR;C8bCn0iF{>U4jtJy;ie>Y0id{p|B#F zI)#MTNhc67&{$Rzu>-EpvLT&=kF$T04#3{91BsE)Z!8h%AYwCXinxz(gq=z_2o2#q z$8A=&6%@OiM%0eVCGNL%hqewE6SGMhETAy^@bkdEM5_Q9-;e&dR0efuTrwy~$%44g0Ll^IODm03OSDck=sa!=TyOwkF^&Z%^1M~O2j+t>HEa>U-U6i9 z;30RwPJo6S4&VfUE0oIU1Hum<0muMkv2Dk>a`>8(Js|6ZNZ338 zwpvZR-7mI!6LYF_k7aI3Vt?zY_0)plr#2dyg7I(%gPfVMdv2ukg9BEsNoiMmU2H9K z`-X4Y>6gsU9Ja4JUq?IXu(P_GiFbHf`kqteY#fM+s0FV^d~Maz+MPVyzDv6#XLHk~PPR77+nPotJ%~XsH@66iRS1Vw4@{qYj z(OLTRrSQiiy$|f!eL|yGpKd*!ee?AB-1myM{*U3`1CddV7+WWM%ElwEI?J0+Z#aX_ z`WL5gjLb$r$eHtwr!}gkm0Sw6lV_pI`oNr_U;8#G9Adkm`U%d`zxgnNsxTUM6z9i3 z2BIQkxDS=v5u=<2;23;_69#0!z1Rx%N;hJ%ayjnsaX_aAj`hb2{vG&Co_o!@2%es9>bv*-AX4c!k=5iyi zxvurHqYJ%D%5Dm0RKPca4Ot(N$H7QeF}w!4g;%Dc2A|;ctBfLIISH8aP%NhsYmabX zgsL2auTTBPSi@u{o+7Wq@yu4-LsUQG2-+FBfA$Ur1K%*qz}$lzp{Zhb!I^Uv=+9C# z=LzN#teumJHPV~d&NR2=LljHO2ZlbSF z?;8~tFm{0rRbqy1SJMUYy2HJOAxWS6`L@F4tdO*>KT97YJi4h%Yk}YUPOWH%QHQ>- zz7O*rj$O5gxX=q)a`IVhc_;qjq}r%1pgTJ^JrhlPFgrRHf!=$%+a+sW>768rzo&Bh z9*K`PtcfFj=R>(sv2e^oE?;HX)au^p8#)okg7E>HHUel$jsN`Za10;@V0HM5v`RgG z?DW4Cxz~W(0CTzjWq0V>T|Kf)-wWsdXkLy@8Vt0_h(9-Y#pZ5Y&VaS;ulUgZZ8o6j zh7PjjdQ5TiMbrEQPWRzcu=J3Topy|D+0hl3nSAi*q&G3|L_gU+_w3k+zO7z`2W{Fh zvbu(aa`0&p3N|>ys$jw(r<|DaI58q8e7$R0M>f&A_mI9u#^FIxp$CFK!%63oGnK$Mw1?r>feB5P=WGl*Rox2eeMY7ehru$;u zu8eEO#pSmCF_g~;>ECN&m7g)6)_pDQoZg?WgM1!Par3 zfx?N+5 z_yNOVpIA|#XoM-}3g{tZ8@&&>1vEFOpxgwyPHzBqf%h;DDtUqZXJ3QDA+{V7lA{-X{=nFp|k?+K$*j) z7+}<0xYgtxR2xilIvx`SN6s!_(-45UAQTH0OE<-wL~LbJv2utZ=3|Tx0z9XSz6_6I znyBnX!k8WS08|)j7Vn1q&F)omMZDvGCM%-13Xf5t*c-wl)I%6UK8>;sGbk{kJVIyl z8Pq$NS?+J@F?2ESy=DN)jMqlJir74l)%=TMi`F%Y(RTbN>OW8$ncd_rSP=ahVG=50 z+mP-dW|^ay-a&`o*?`NX+^i2-gA zI-C$g*Xg*PXbVt{i1Wbu;pIjK#YXGu7rvcCe9d2BrSn8hk8skl;`+CRP{;9W-U~pd z^=nTTaE@0SaEnErgDnNih+tk@@8}--)nJoa%W6uC+z@B5`e{rg;B7L9A0IvX&0ZPhB z(z?|M3Xtsw0K9{fZB_5aLi%smdc@QF%dCZoK?Ap~Gh@elMfR<+gFQQKJ%b|}EKd4` z{I18FT}e(JFtahud@#D*;X(G1kra#GB_ZCQYF z+)}4A|K2$_?L^vbOiawkz`X9h)bIUlz1rN8u?HsKasr0O3>41#k3TjJD(#ZeW#H$> zr&wk;u2|1qwT!*&$s${s6uljGGwDmeY~2JZ%fv^!V|-#hU)3?l2>*HQy3VGg#vVH( zO18=HoY|eUsD4!oSiF1(&RjL&P0w+=f!wF#cOz=@ua7SKE+jeMc%#=9@*!_rZL5c= zWrCue*^`5ut#agafImPTb6rMP26eRb-&y4bs`X&b-otADRR25u^_cgu?E@d>;*UNZ z_BmdzT*-IPl+oKNdQU0S*(6RxB2;Jiy^wMonzsjZ0*z)1K(2^XR*AADJd1e@WC=$z z7Qv|yCmIUa2^pT21L}hhO&n7w2aZnPRk8y&PJCAO0*6lVln;PS81BkD;Y+=tfxj&> z;_A|Qxw&b7{3ddDrq|8t!!3xg4D%{7(zw68toHf$oE>hZL}R7!=Hd ztBigLHxhium!n)nYd9x#8J~k$LR{vLV85ekL=SN`m?EJQ5rjkW{P8_Vndw=~I&yM` zg)v5I(m$hjz@ZFB^f7pvlmV55+Q5LS_#*q5T$OqBMaD_&Pt+^g0}L8*Z7x8i5a~d7 zRjoz7p3_tDN8I745Nc3{{I?`!43zhadJ{9t=TWsVO8hBx4%$L6sZoe2<~3>zqUgeO zY8v7vFN3-TIVSAUJc{})P$B<9f`pqj&`2LHgd7NiGQW|B;0jzX5+8Abw})~Vmc*|n zE5K5DFNx`JQ*JfsFLaXcujUHfz}-s72aoaENwJU$K?ivpa-X+T^%BTMv|wZnflMR~ zuNZe#KI0`=ovq2^6x;gNR*LYBk=HB5=1xO5E-(1HQ0k`UeVl!2C&iTxF%4Zyrf#w= zuU4M=zi+#_91?W1rDV~~bx#+5`M1x}zNf3dLU?^~D``QieK{*<{2z25Um9{>Z=)@I zasAV9S)}fw-||9|xle( zsQjO&9h8x|Cqq(-1tb8la%}(@;Gj~NG&W`BV*yZrydn_r3y=hgl%19-hbziL0Kcu* z-G(4h!Ph$PpL!L2uIuG#VZ6=2upJ=5u4mSMJt?;Lmc4a!Qu_%@*>KHkn@niQMqMDQ zW0`+Pk2=U^j*K34BW7|37u|2>z8@a3ODp?IOSbo_*};78Xw;ECzu9TAesGcKR-N=N zD@nCG>C4zdgZMPZ!8+a4Gv*U6rhz&9k>5tng*6jjjn9^Q&fv|>F09iYpL|rQMc0r@ z6;SE>EE~>$qV=6l&4pG+Yw0IHJWC{AiJ7e1u5S=~pb4t;FnzEOWq2s*Q`bkMhM2C_ z7q-p?dShSnBQKS*va2hu^l}GFhw{hAH+dHXv=!VSZF1MrOI5Tnso7b(?YNp0mjM89 zsxsa(d*nj@U7s$MTaj~J)iyw!u%aD2`bd7`M6d!|DSv$Pv0$Z*>@8Rv@z1=mMWf}* z`A^#NhCtC7<`o|ol8hSS<#Q- zm(b0OI5i^bHM@kYgF47HR-ZwA;y$9dpwDob>S%PC@VmwodQl)EkD*Ki8tS=-R^F(F z82O1`r1=mP$gLy0BPrYnayEj(O;NuB-^$jdsKKV#%M=3qB8N%}g1U0miLc@N1tH`^ zh)m%_H3>u_oTOl&-GYszIH>--BiR)6O}s{V134~o)KY}Z&39vMl&cmFI4vUTdm4Cq zEOIYTaG%<}ymmtr=%je<&ip4=|N5Vj!*0`87sSd=*Xp#zGWH&g)WsLh%FPd!A#U^z z&E-;GRNLFd2X2|2K`Z87e*G_QdIxv)Rjt+s<@LQ?eHS9`tzJ#{3GW=Ns?Q>=N7=BFdi4%Kf!$+#T3 zv7uOoFLw=a8lVP(0%`#sa4O&?AP$-Vu#whc8~^zv=J!8~IRDQYW~tgAIu$HiyW40X zdVkwii-EX;UXnE=zN)X)`fO}?2ifLN^n91AE!LlQqsn-~4|r{x>9hE?o?e^c%v+=H z-2$^N3?Fjw%#j_@vXzvi(`xM(YFoJGuE6%YqD&{VT0O~W2T2Sjt6fDBzjeq)cSp*x z-Um9+%qOE4^}pxokGmOF<#Q+fjTQ^TrY;*Uo@dTATd*%S%-ufu_JZBqy5-OX7GsB% zX{Jm2AH!0g`#Bl}_rNbz^4jc}oK|`L@tEo6c*BQDl%4}&-)eLC5xt)oq8F;S-gO?9 zh?=Z2d)o@Ey`ucH{Yggl9YobbD8tMh*v&*$*uQ6oFUVY%*#`^-90NFM=I^8IVRB#C znVqzk+{0I@ZfEEK8)03uZxt_q3R%gJQ)n?iShH8Re;#>K#r%zkOOa?*^Hf3Bm@b|N z_&6qqvkqRx?PJ4~rqH8IuCfo}GJ~OnhiNiefd-I8+Ev9{kb5*=gT_O6t2H7E2O2--r*`{_I9Fj)wJ+X^w)0Z!gX^+ zwl@?D>7M%x-wUapvxaR4vFJ^RO3;4xPoz5ZGJ6mu1KZC3iPJ)g1YdB9$fp7*)(l}R zgsA{go&02iDe@0*I|d0G5gftYK{oM0s&z=SIZsR(Jder6bRj^TcHBM8IDH2$GNY553bGfAf-YFSgT}z_!50ujShLqG9vXMUb0_PE#RZP98x5NDcDc>02K?* zkPTo5#XBgY;3jc_dJA+-_?&bE8azKwW<$#7_o*s?=-eYYqr|~#^Mxwg%Ia2bm_uq^ zl<=<8&zcI+cl*~@D8dqlQ?(KEI9uior-f&(v?k$FsoUX})};Z@*>=qpn1@2g$V!Jt zY0s{;&%WRLa@Y8QPx?b|Z3~#_b6Oejz1$PGdfMkjYn9}t`_}rFRk)kuK-8m@fMflB zcgB5tJ0@;!@YB9gy{hHKKkGO6!pcqe=8@Q)U0`Wm3jlx}|5=ngU=jdDcm2D@{%=KF zUW)JUG$ikK*p_Vl0=?c{7=CwZ^@tc1G=J={dP0p{=vu zDlB%Tt<}0Fdb~r$&eiY1)xV}$?te>3`fnpQ+%Pm9$|@daI$ut&?8|eu&AL1I(Z;j1 zn3nC>SJ%Rib*b-+6IVOi)OATx9DG7xNxxwFG31{88ewrKx?q~iSvN;VPTb3O8n@SX z&z&B3)O%O_W2Vi3Q(;5LnW|hl$2w!Ce|a}!!qWacoZf%(Z^rWhgwe9QZ(a+2XW*Zj zeH!XfJxw^nzBAvYaKgo*kN27uLIq*3b#Ev3lNO&f7$tW|TOk53lut86=G1eb^R7s( zrcJFI;Fx28BLDy_9*_j^f;P&i$?S$q$m|6mn$Fq(H1E29*Y1OPjldCiOGTR#247ktE;}DoI!Q>FAxRw|JId7irx(2T{c7aBqVISS!|FP!;Ac zOBK9TIwST(`86z$#R6}E!{tp)D)od>aWdC8v6&$o;LnK*}%p@_25;Ejqo8jmSzJ9 zh6FMq;13~VOliD9mst=b5Z1-Nj^ZGbrFkz2NuOt_xFgoY_PCoUuvmzP`Qrv;~A>`#N~1K5pcL) z+@q?6D!=*OBsMOd<3#GheP_qw+tKNqe&QOM&XSeR$=WgdNSWvWb}12$&gO2REMT+QC9@x)F0>ofeob^ev!98;lt1K zmdStN(%~6(efSH0v|0`>i@#ZY9-hYQAislt;=2$9kbF@VSq`>ev`8jFJVnivVCaH~ zNt}hLEow_uK`a&xGy~v&mM-d@gfM9jdcNsqRRsx0t+!v^$mZFmRo&;M+U%`5A~3Tv zzw$|N#y0iprTH;?kA^Kv*3Qk1ge6&bhZd97BW`t_fotWiSGtef{LklV|BKttgKUN) z?rroR8lJrOE6Bg+$ITS4!RrXo3unz-M17OdzT}C51np5&Fuk%U-`W9s9kDU|c{PvprR+=n8?nfNV zT0IdP5?eE8+7LO|eaZGks7!yiomN42?b*z%iM*s?0 z2lxv(35Lp)1HK<^0_Xw&ws}YY?lZshG2X?;RFZC#p{FR?sp3gQa+?ufG1HtO@FeOB zHyKf<@*gh~{ZsW1Js)fiD`6PHc3`&AoguR53|0-~6>f}kUHK1&#@PcFpfkCSU%%0I1T{8+Lt?h`*mstu*fwI(&8OSz?#H&V_&R|AHBQ^xg;p&ZCR#K{eU5x5Op$6++>qisNk{^ZOYTDa<~F5we}TfZkcW3<(J&Iwx*R6 zLW1q3nx%zT4)iAc3fT2e^Y_&q9+6#&w+20v2NNHXeTlsr?uPm-*WX@v?My!Zi#B3= zIOBEim6IQWNLO7AW-Ki2oDq+Wm(2B`2OYxF;Tj?bRAH;muxsT-u_46Q^JE6eJd#<0gV5OevlCd8=^R?g2AwBoQ!0_pW^Ur4X*xaeLWLrC)?=BM!JKd-s zkN_PFgK_bp@RZO!ZKo)oqw_lVQC=ps3^r=;GaE)0wexa-qrdgw=iW|UHQ<)roJ}wa zxbSE$#$2U%efqC)NACLgtYLk|r(p~8wm`ir6V$NCk1f?F)XI@_dC}b++r+U~u9TV# z;({IqZ^_jovpg=D`pfH>bsQ?%nxe+}mtCOm$!rE-pgUxD19pQi%Gd++9ddnm(@OvW(C2f?7*0GDAhQ+Ndm z^u<($q7IlcZJ>|EiI%;Ag5u&4|-{2C(sz+0uFSNv$AY6G`~HIR8ck zQykQ6djx~|2d@uL*p)!8!*BA&6Ka0=iJv60tUrhkn$y(#MbH@RMO&6jU|kU#75f~ zyGi^-qY*_~_@L#6E}sw8GDo%uXEjZbN&;;%0I^wcMExD&w$MV|8o7<%K)wnG36GMi zpuNH$>Vc5|1V6}!Ag=@^q+IaI{Bd8 z-g-sT{bk45yFuQcIs@*_`lwZE@-{mDkoHLwPyLFry$&#J4lFAR(fsN4>#VniziV!) z6QSLvCPIV@aa@UCCl0ygXFgEB?h7t&($NahxV~yK6YA5NX4xEP(93m1#JTjPy6j1O zK4$1;o1M+M67G_@L?7_0k3QW(vb*oJy(Hft#RXBLXsqWS*n8dDCR~1;;W`vEJuUIx z9ces1=pl@Xnwax=n5a6F5x5xtXSzEeAoF^xX(C6)PYuvDGEz4W_i3(W_>6qj3p)p$Mw$}K0W`KrU-9CMmvL2o>iDG5 z%M8M>tr002S$To7+dVBXRvr;Ws{yL@Qx?VHR;*? zW=kREKY+TlA~*rK0XPG*0PF+Ef#zlJ00NFG$XEleL%TL4$lznKc6NvaKEw(}qKPkA z8XF%H=W0!A+~tO%a?oM)cF+a*HTtabVQ@V?MF|ha%<&Zcp;ff$<79~4>~6Ug&;-3l z@jYY@>$%cn#5nVg(r@HWRuwQAG0%|)KSF(B?*YZ39t@NHMhl4xPDf<{m_zK$;pn2{#mD2b71uX zY&vUD?F=E9)sBwEaT#XtV8k5rBNBk@XKzHVNOjUaA~hiQ=(8vn=mh5gZUgcRe;B)r zh!woSj=@8PZ?Oo3?)(##3&>DkNJ<2Nt{Q8@IH|~qum63YAOXX_2wUAfix;jva^l3ifJ#K{5HpR5zrf;5_v#+(y_)F^1m|Vo1uc ztVM8lX>IHC_WiOpo zxYv@esUzZ=C=#<97{~lvpsxDk!fEzKGeVKmZ1Sn5vL@C+tH?^Q$i|`LhRRJ<_qb{c zQM|*}c%L>4<2>Ih<)<}90*;rNXeWC1W$hu?cqFADNp7yhi zb+izusqg*pLX2Ttz{>Tr#+xHQ_HI7Ki834F*pEbipGR%1T>xLqen!S;q;6(0^FruSVmFNvs2o!>W9+vxNPB$F zdskpWFWzM$F~4KYF00sUEY2EMo<6(TKIigB`eWNK75n+&_UVb18J9^GajXGnsH5&2?S|{F0Ix-0Wtv> zVd8)NaBwgn50E5(T9yZBKc4+>H<}zqAr6lgTt8>w>1i$bG1U2?1 zkO^ut{T&bn-^|EUT7&GIJE%Af%BDdTaGyR#v3zMzzu%Hx+n_Za3%9f&-} ztnxIRNqeEB1v6ln0+Wyz<~9MZBBy6vfdWK^v|Hr^^_cyw=m^c8-f*BS5BXg>)4Bth26bbFqrXA}d4I7s&@=pAtUr8@!rSk|qsw2oGwi^Br zrif#yVv8E*A0oJ6PH?vn^KmWQR5dK_A~%VMR^jv5r0uFZdEZHs*h@Sf(EiX z;!!$iKJ|U{_3?uD{2yDt)V7`mW8dK5d;wvD*YBuu^t30z zvjPh8dg##sd*XwQx{eWt|1Or(@(g=%AyJ>|<5#p_Tf@t^P?1XYbS&{W(GnPPW7sr5 z(zR#1Ra3mdsEmVuY{3M?4HkcE+RLjqxp?NIr)@Huw%yMq;RXFkNJw@KYc0Aden#rCKhmd3w?mt{;l?FF!7bZJ&9Qd}^K}#xYlmX> zS*flgP5SPcuf`chT^V*GE2gvz#i5f1Ka!M(attUj0T*J(akkGDBs++xe<+oP>X&~J zr$O4VD)U;$aWg_@UG2@k74-N&3yTB<07#%FX|4;vBmsN@s*q9H9RMzb^lvxulZO)u z*x@N2ie-#GNS8Nj=X67NfM8s0wKI54E)#JP*T*aYCLk{|Y82C;Kk3^QZ$gLY!wL=H zKlEf}Ly!-B6zB<|)BTQ5f@kKg%l(4L%$-tvB2_xl2DZQ|85@-2q2HO86jx!Oxh17d zP_5bPpfIq*T$$nsq@I32$qO1hXR7c4WO4mL*1^-R@%w6_w&F}mcbgU95|8E|9#K!= z&SYF~mO_P5#UtMn2zp0pGU$`&Q05rrFYz8zooI-^O}~SRLz%Dw5V9x|>m$Mvafn-p zn1mr1I;gkMX;wLA1ZKo{#$Jb-2|94^5wap@)f7~Mq+e|_>hAIrVj(v9)NI~<~VC=o;U_KM@@n|!F{YYh$9O2QVywN1^SdpTodmyiGlgcxkDsN_14BorYI;k zPwfw~nOmj#8r{fWqh_KsrSC^AWPs?ph8L<{?5L@MtQ4zKR}jR7b6N`M#Caxl9o@-) zM7o2-376F6;n&4yDN*oU;&uuZ9xxw39s#$Bh2&i5Gf4_%17bk3m*NjUycj{DBDO8d zkY2znR{v0q;qJ?OHQyraR<-nQA>oop^|R1EUN+GVq%GA|J_`COd9Cpu$iC;mwKOT|T7w<-#2A5hjlmc(j;22QT_QNzBI8N6eKQ zYZ?cR7P8eF-MrFP2|rz;vMq^1pLZ7?=(I-dY0oi}ByAd2vVEI!c{IggCMkMK-kqEJ zA1%@MQF9M+M9dmc_6+B4 z;pH@M=J(Xksq)N$*jMRw?9K81@zJ#7VTy@kwEaQ16OK(-`+vYH&+Jy$W5V54$2 zcc#|rWvF-j4)insQyrB$UBN!>Y7~R$4SjN2F^M~dHtB9jdNgue-zj-@wA2_EU)kO?#X7kvn6k5kycwbd(%y7HoriQ)*-q5|m z$^+UddC@;2Uci;vZa^DkI?GyF4{gC9DAvIrvuqWA!XueR3b7C}T~*NwOrjwbqoD_B zoDWuCF+EYy5xg|luc!~%J1eh0oCQGN_9WVkB+fH=>5RuVvc z8D7VYft?dv{cFS*8HMNWS@^_%uPZo-FFHLo>X6)m6KyC`Y-tuN<@>cniS9-CO@4Lh zr|{@h!d?{(R;lJ~@|=|Kw?TE4DT{uKk!Q&v&Z3Rk!Khfob?!6tDJh4RBb`IP!3n}D z!CC~Nm?AhptgE(!f{8z?O`w+~1Gr^`*S1q-2<{yn3>nzT@jHUMK@=1 z=h7Ay4Go{4+&43YbOYjP3B>=9*O?Mu? z!4t#e9#wP0Z4+vcZemXePm-;%ulUzVP}F}sC1N0|i47vK5Z2r};xr;&@R>A*^b*>r zJwz1DAEDGDZ_US3HlaYGUm7Whw~`i36{PZVf#w73&ZTJW4cPAs#@e2kqK3FBZ-ecGjVil9Ln{}|E2K)%MP|;51^Qc$(>Je~ zn;(0>`HRKtgK69JoG+k54xjTW*F34{9N={7Fs$BZEJ&*Q7!(~CjKu_a2VOvacOzsf z5{%vD%NMk+`nc7R_2c|4+S1I;q#FDh*3(f*V!Ecl8 znBHN!spTBM2+iz#?w#n=Tp3PM?A6@=cyVzD^A2$XBNXz(*aaa@XEx5oduODbV9EyL za_@1?vu>47&I_8VYn4{y$L}@q)=0CUM!-tvwDY9`iD+QG=&5LHYj6HhF1*|$^A#g4 zMK^7p!AjKWJU&WqSG%n|L2gK%k4bb(OD~t$eyTtBqdbb zbyIh5{FTm9jU#andpA%;DHHuO#_ux8qgo!YWZi*O=P=4(YN!PD8>o>H< zl>}yQtv25wLzH=C43w<`^lK1g!T{SIhe27b*@SGW#! zV6YUj!Rd^>in8Dux{cBUsPZgIi3{zceN#k1e$2vvo5A%A(s66h;RcuFj?)Jt;>&F; zo8qmm`&oDt<%}P2v+e4TjMTPD6$W%msygSG)Y#MG1alv?NAx196X6{5lJ+jD1#_Bw z51+(=V+L`_>|Y28DxPx!O-71ER#;bDr$`xl52?-Tz;fa5g!i%UkhldWRawOJ;v;+s z^6b(&o`$Nq89-sF?z$~Gu}r>lyH;V-%hnS!w~k0ZJo9x;KADvKn)L)@fGM2C zVX`4|%nVFEvVr*#`vmR6yoC$EeC4F8{K2Jiz=S8*|5)CtTyzrC9iIl$j%dk(=bvcoWA%JgsXicDREdQoV%8TeROj+%CC; zq0X9rz;fYwraRy}B7VASVTXbd)@d+9|0%Zzh(=HM^Z^3Wcm3jCjg;=5t0vJe(}9*4LCmX|aPvQyzc31OAVpmYnSeS6$2ULI5++!7Ftj5h5G~);j0!hR zN2I6r$gHkRH>7Xtsj#kdxNnXBF=hPYG|icWOf1orUKbo zz^KtFz*j(yxdlKGu;;WuMo)Ii;Wi*oX5BeTCSTUY@skV=z;jO6w6sAsUz{7PiEj*L zo(zkt`7j0z%PBA#oONiumgT;pVlmSz=c0IFI!u8CYGG(7u0j)7sz5!&Z#GEz0McQu zS*Z-Z#yG0%Ddi&tE8T+0(OxMg!Cunt%CEw9%|;$S4k6Q06|$jtriuJCq)fCxJR7fg1Y&O~( zN9JrtwV?-u>Zk$SE^#^DP0IA!gZD=#b62sS;Xf91@te^*7FUQv7{XE_*$7jxs;gFl zbzWIjgX7!k;9%Q0?x zHYO{nzVlw;w~%`0$O|iF}<$W40Fbl~b=?gSia#qWQ9J#zf-57(C*pde!>htre zY_KnXquM6ugVjKa1U7xvN-k>uI`+;#uQOZSa&4n`fFbbOp{#gwY7^*dijSig9+m9x zwhPx0plx9Q5qbRy4#HG>nPxVrz4GFfjcd>YjyGx=t_1SB*Gd7MCEz$GD1$Dy~5Lr^DCSc_$IEEAm?q9 z_=PV;n7FBeM4o>X{hSr2J*u_XMp#z0Udk4gHBOiE=RjjcLez zG_x@rTjV^o%dI$cPf#xWXJp%rQmtRny4SB!x??DfX4*>~`pZ>=)CrZFDTCh<6|2`y z-1hvP@fB6!6X>}ga=^9)`+Ls?$8E>wcKmY9+F!G++oEej(uU)@*8fgYANs<((CG(mpF1gPIwu3R9ppmW`qX0?RtB+=l32nSv}~vutgJE07Gj zj(jnsnBJ$51ZB+amEQp|qIF7fnFt0`{wGv{UZ-pcZI~-i`UpKvQE(^CmLZ4E!AuyL_>PNCzq1kjHC9pe1^k=o?n9#G=2pYewxyA_ zXI<{M#)_T}j%GSo%FcMJx?(ReKAiYY&Sk}t58$_P{4i|XN!BBk?b2?~5V{wI5rm+* zh~fDO)z64gzL&}@qC$8~r5*WZK1+2L87o;)yNS8BY)BMi53Fn?)YYill&+#W3PI>ZeQl}#;WfAxAbz<@=okB`wDnLr)yL0IBP8VZ|QF;7a%P*(cVLzSP+T z`?kI^I>eFN+c1N)`q0Vi1D#xK3~peVm{tE*hS9*E&2@VS#|7;@xNp~I>nqaZq}fYz zV3~=)KeB(e()|1Z*EU-F0S~Qib1vB4Xmhf#?lo&YF}Koaq9h`z)Uy|8H<&Zse$xzF z@u9@eB5@K68dA2TKT&!JxyUR8@}=Efo>DmiNN-m>1N}q)rj!Glp{oF4&}rH}g=(<+ ztl{yW;0lI;ye@E_j#r!lzoGFJI=~fk_DU+yblSYaH?V+lRj~^q5vVAzKtbIP4Yw25 zGJC7yT?^B zTgN~+J5aue8Q})Zcf@b;VZ1CVdHyOP8M{>sSGkJ~U4|14ab`C!QeyDR=hbw{%zB8-yZbD`pjG!H}rPpn8~a z0vGdvn@JR5wsW5m_u$^}$|*LgYrII(BraAMOhKqfcwfk;Fa)jvnTyuor;vUjA97hl z8DxjF!rg%oO3cVbsGE`j^>)ma#YYr<#L!JGhvpLnlCB2ZvfIKBv|9sNLNxus*eUV3 z%GgV|g=c1qrVp2#ebXJB7mt)YD2Nn4zBF1mG9TZ+_lDYhb*Jm~4#~^9@w2aPe~W^8 z|GD*7^C(8VtgdDPk&~<%Y)1cCRH{tMyKp-@XejXd>H_r%es%t|>MvL`k1w6k^XA=G zqk|6I>CoE=^(+0Yy!${Q?$N(!wZv_xmI-xE*nelItM^Ax?4jp=tAr-`BcWlIW^k-$ ztcNvD%j0yGfE?(;Eq$Po=c!ibZD``3-^w$I2s_#Dda^hwd?dQtS6n|8v} zIBy5@Wx!&tJL6UO(3!og`uHQoT0--}4`mJ!?t%wJbqmQM9QnI%8Gw_?ou{J83_i}2f1%ZI%F{@Vtu(&9Q!Ye8+nb=uX4;Sw5c zTkxg!4b`m{CQQp)`~5%9{F>kIzI|q!h~av5e1-GJ!FDo(_sTJ3s!@>Z5jb(3NAmbJ zewBO4Gi@}QbI^TZlf|kUI>c3Vo6sCo~_B8g2z-{{4?I^`?09A^TNrJjH0GC1FIro z<0FTKkx~K+zBv2&n6g4V>m}FO-&a$n|t=qytoqDMkmly#; z5(w_@?(XjH?(Xhd+?|kMfp~(1ptaq0*L~Md-t*=80qc6kTGyO&%yBPg@?u16uupmZ z5l+UI@pK3^p!2v_1#e>S+!quOS#sy@5t2i1akC5DUcJP}6uGd@$wvhIJ3S1#2azj? zgVF?iBP0^MOk87cH(s;14NfcU)ir2?VAhOW^JrC8m_I)2D^>v>^QfN zEqvaOp39k5+z)9Hnr9$F0EETgV({q?9cmlL=^*V$H0$$?<8;g3Z$3vhX z{8~Na5Td`~FQzJ9x%pFc1sYG37bk(9lgcGiMT5zl@Oo$iSyVzDno9qLI3=dH7ml)# z+}Synwt&6f>P4tQcjz|AHc>QfLwp0|OuLL=0Oz+mv&mis`>hGZys5L zSwKXPes1Zl9Ffwf$*WlM+3uFcr?e|2@yRr@)&eWNg=k8!UK}Lu;TIN<$PWmYu!_|2 zR26la!BPy8li3g?-=^nYO(W9Mqc~zy2y&x0Fi!TkqBQnD%a*+VOLHe4e-BDfwn= zdcNdlUN$241KvJ)HsfUFj-O)1Cf+FHZ~xPM^aiT>Cpl=cAkAvUq68LuZT@@M@8F)P zWzY2h@9|I0d+~aU-{QKe+Q~l#Oc&2R=G+bS;DlX34^t@cIGCO6ZpS?Li(_cvT z>rzzpN+XRUEslED%w45;r@e1@-&VoE1xUcAWr|=w_`-@Z-w04)d4;D!L}B?2kBJ~1 zu z+ZobVeoOybOl5bK9b33lO}2$pf?;2T394cXE9O8ewZlGe$}4wT(se!8?@n{5WMIq> z@zZu=PnMs>nt$7|U0X3jGRvj3-JIgSkm>VP%kEx*?3^uHRuG^~KNa<)cz02nSHv z48)V&X9zUx&5i;x5Z1VzC*1&5qke>71=8v9UI*p{gbn+32MoGYq=(OaDOI8s{0ti` z&H%nyX@U&`e=qaH*gy$unNp(ATWj-DAE9*{snTI$F!EWHump}6A@fQ6B_1U6TQmS~ zEvF9wZsyB40G|_TWvW4T)Fsv&)|=6z@JwQTt4--H& z-N0~~`c(Kic${lz|Bxp?L zJMX;zrk@3r*OQ*ZE#>W~XYUG2Lx$M%?$1jijd9cEs^QD3C)kVgJKP8erYhEkf7n+r41mp!j$ zPmQzLa<{#%Yu2}3d%m~eBZBQDRkxIh=Lkx;Hr=E4ZpP8w6GYt42S`V6M@bTw;Knw%B!rNZg|pcD(P*xZ81WaY?Q z6wHeFcx{HOKiE&<>Ftu5;n}CIM-AcgQ$cg3)X5dwzQUz(UPJ$!s{TrCx73=p4VCUh zQ2&N5xrFjqfb>wIC22v?9)z3FcZ>rF5vK)g)XSc-<8k(4H};TT~TASBql7dl(*oC6Kaw5ugqj19@`z;5mQ=)uujg`!M4hPh>_>>9a4hzf_%Be} z3a5k(;KwpRQWdnnx+(desQKC;GEFpYQ(0OC$|Oz5>`Ua5GUfGP8YDB+C(-{1?@_wo zyQFQFFG7ge%wkQ3QhQ``AS!#Rs_HQPogZ@PVD{Yy78FHYDs)n(+JwBgi@_98Ku6AG z2w7#{ldwloWO8lxQ5dTq#(b&wNtdSDD31ge%;Bskiz$en`{=U5KSsAt+n363tgtCVO z2<}mIq`nD(_LnpefUd3<@Q*uG$#4HttNO{g1@=*E)r<6txBTk)2)Cs|Pf68sH%7HO zKLx)GY01w){0ts!^j4DbD`=HeZ}UIjr>e6VGBtMDcrZkI@~_E{NbkAtHjffHFs81* zk{L_Ko<7-LtB(?^%UI0cHvgXDUCxC^qpEw^IL4R*({tnCq14V7%tD1O(Y@hu?%0|~ z+>g9dYg{33s@*puW6JZw(cH0oxh6~R(rylD?AxLH!+wv+hs$_5^uM=(hu@gabNQOW z`g6kN%VP1K#ZP-Bm@K8BORrO&@LvNxj;s>HD9XUp8Iy*iI>ZP&w59YUQxz z%Vv6=vBA~#(7o`0hNT&jug3>$3JvL9v!p^Y~GDvmN<>3+S&${)P>4UDvV`n3y%V##bpcbY2$@W6SpM~1kwIs zS3loyh_wsdgjzM(tegq#tH_-(@xEUuH4ZlC$^iC{XSD3u*Afe^EJk7!{S2S7K`|g<7o723dXkGDX zM1Dtie2v$jzn}wH+Bj@K`L~W+v|+ZT{?ky=EOzzO(BJ}P{ac}~Wqk(e9^G}~T1rt~ zJ$aVXfms>Rda~XVmC{-tU5~SFt57`u)~#u1zeuYZR4A#^1}0v#+$<% z(*h^t?8%+R830*s;jhK7N?XkFrg5E}ghY(x~k^9$}I&T}-a93)k=@8|l% zScl0TY3kR@5HOox0QCp5Z9Hb4A9;i5Dg zjM6nIb|m;h7+q*Judjsm5Y1@ElG`Y(@M$V|cYbY*8nFXiPudb+GU%~8xEx?+w7qjz zP8N82kIVeLlsePWT3_zt0hi?`MUlNkQ$3lWeTZI+%*S14B@T&TIz}!LY)08dGzvzM zZDno?yr!orJrSx|MoX^pep5{4&}M(5%yCAEo!#Qb1)p<#{(^kEx6VdIpiFqq#yvI> z5xE_;pO_|58986yEzcYDZ`WH5e0b&H89kGbgOPSat`M7XHDl%IYjfuucj7x2gq)4j z7qDf1YFX3Ej`2YiJA`u`;{A%d&sX@T`j~G>@EOem6Vl40!ht8*wlDBG&b&gnEw_hV=x)#@=}z#)9X8 zUXOCra83R{)9scv+&*~UP3O_&H|($o6+1G?4Eig>?ig0|ON-s_-)<>m|AePA-nO2N z59-tmGI9UzXNA$w�aLz8G`5SO8&3h{6asMEg+&eNz{olYKoL7BomY9_MG6_z%t* z)BkO(*(OcMtb8}s>U}o_($;JkYCEm?xuP@snq*z6v2C7+Rer7P6#+=%V}W*FKDU?G zu5qrVzAiYDebe}4<#zB?Isf#1=j_5)BOi@)GB5SHslHCK?pjuj2!C0#E*~6wwdq(d zsO&DLI&!AtN@<_Fz(e${(K{Klzj(U%2-s?VFW^_S4nIa@b20T!HNV}g3HXT^*Tb-; zzJ!3fIdov*!$fdqkd;zwPWFtBWxiOqmg97yM~jyQCE-FhrwKF~JDOlN5SG+=S-;o& ze2swmWYX*m!uon9WU9<1!S`wT2W@&tR*Ru#OWoPEp2Sma|82-M9+VF*AmcmA66f5K z^ODYwbbE7mt&kZ*)cysWZ+Tb&bu`7uqf)==xd~;`)abHK)}kKYV__`z7+4|n3>OP2 z0FDr?S(*HHgh7dFVACc}JQFlWd;`k^>r$H}zJX%tb+A8>y`2eZX|dz|m$Kg_@%xL$ zS5?{=s8CIJ3C6gskh$}2ij1LzE;SVDFZ7UFsP{KMCHV5R~OhM{{g7Ivh61;5DuRzV*hiz8U z)t_lIuhKRsa*Ju(ulsp&`?v0NbY*N&18{f7dFXu9Hgp@khGaN@dRM;nQ?}Q>qLHPP z=1#TZq3DIZUdtnyw_9=22mp;`ADFc>MJiKti#f>lMu?i{pt-)PU%Xv6E?7E_$Anx_dZ$=Zr}C@pORkY%Zj4t ztnhseQw;q8;SaT_(Uh|YBy|>Ob@@p=v@jeBzCN;NxDwhwIbiuAc4Xe&5giL$U|po? z2g`LqnYm`m)`?m5K(gO}$M|>V9zh*_=Ad<3VBz!O?)I~Bm3>=sWHWYaQj$T}^uyn37T@f=7o;+%l%o zhv1#rf-*QVmiCyCKBcH`>@UV=x|jr2-uG~8<~APoof#xsaR!TwZ(F;@UYM(M;%ls{ z>owb2BOX}9x-2bImqYw9_h<)!U$K|AI6@aO>C~V=61t9T<}JH;fmGvOHXlmVb@87A zZF1Yu#&pqC6OnGtp;xNctNSZ`WTy&BeMH6J89Pc-!g}!&f-~H~-jbYZSDH;Et}@u? zvN9T7HE%V%!eByvmTphA+6CrS4hI_+WkUNkwB!<0+x}5a3JxiYmGw;EY8f%osAR1m zdQH{4&h>^^^oMKYBS(fVT(;rjTM^}t0LWmgxfccIXIJ>W1y%ZbtJfk18_zDaRNXK2 z@4po-nUC)I=0uNn&CyZ$>!TiiNfwm3-zlx{no~5!X_lI<*;;OJko>y>t)3k%ShuHM zoxw4|G&L-VpFgm#_v0uuRu}VlROYHFTgB=?XE#=Q&i$9CTWC4+UnsJdo#^C5t+%I__jHXB1}c&PoSsqUt~W+_sRWIRHz_fReBnNB{@omLZ%3XasW|V z(rvk8h!PEgVnCF(u}WEDW=FhMQ!4DtlZav`(JkJG{l!-(sD=3M-;@?=#u5j0nt5>p zMmOBF9x>e4D5V8E?B*3+3*@8kuV4n$w`56&6As%w%e*}{O!)*8$ELkTEp70J-FLd~ zutVmCK`eZMwut;IGE2S&mlnRVg=eLUZ*EP?y#)5|oG4pE)3%O~J>aYK4g>^nhDwm; z6TwjjRSHGKPlmNE0nalg@625XA?n$T*w}1@E=iwx5KIFvUJC0<3vo%i3k z^zdGZ(df@L#fqmxirc-k>q9mAQw-BX$A%k>PeO_&7R}sK3en$O29jfzvRsSOt1w)F zB6&|%7V}n`wP{}CbFq67$tu`C;i!d+Tj##DrnS!7O&BgIg&A9dZaCVSvsg+}d+$PS4$A>oKc#rLJhWWVm zACFo@i{W92o?M-^S6+;kw0l|WZ)1w@o539$n}GT8MBAD0x~X1=vZ$IFPA9wO(1v51 zJ2>D`N?ZW;ER8d$3=5!B{r|;s&<%s%Vi#%t!A(n(WQuRf;u~VK%kPCq(peX$nS~8Y z+m5k^b8!8*j{VLIC0x~uxLw%kBD`j#&|K1Wp!)qE_W9?x&u1z9Zvrc&A$Vuz^vjBn zfd-SgCRvPqFtx;F;-k}KZpi3Q>&E1ZJvBPWu(K5|@<##ldG}?VlN&n(O+n@CBjRqh z4Vx>sLS768mW~+obk|)S;X0n9aBK4SVSR5ca9a$%k1n)mYF@|YRX5g%j3}p-PA0tl-*u6}fols>|wf$$9lX8bbNHUGdsWWkJ0J-FHQ=Ywb1C({s}o6}K~# zs_v^VG#E_hm>Oorbf)Ro#@n{9>;E0?p#RtUe&jVVr?#gp52G9IUzY=vqJmUkbsOG{oWn-M!b6CV$`y6nxFf|0b|4PQ zqCg+WH{?JN0^M85P^@$xZ+}IVy8kO?(fQwPtCpcG3%c)gcXJ4xi!?XoM^7b0jydg4 zw-A#n4#a%jbW?VJ=RWX$vullZYn){8kGw6i+FvNV?Z>yjY4KL>n31K@3<^0=H429- z@10k5mHb1QK?DltQM6#Yg1+?Ah)t0Ny0G+Vzyms6ss?CEe=Y3*@}$a0Hi{r9hlna+ zZc2b!E2#V^&6G{7qtOade190;$?~#tSaVzipVtXm=8wMxjhRP0=Vptzs6pi)jjM{( zljMsvuMt-D3M*;n)cX-~tN)x)Q3z&C#v&r7Z~D0{BS~+8-_awP8%_3CNq#*)?I)WX zu{=~<+;e+}ur!K>AEUOh>lP>QgNC)x6ZeC>l?RVF58YarG~k$j`ZcUzj7rkt@<7m+ zRH+q>;F$E5C3COH{QlLyNfN#yohB~NogP;Wnte4Z&1q4ev8BZ0H0AZ5dkP@Sj8S0} zS$;F)^p7eEHk>sM#!ddR!!x$eLNvxT?LP;EPL?_7M_*lBbB~VqT9R?U)gaMu&MI{S zzdsovuq;Jw@r_yz*t+WHk6EPZ`$k|7sT%%a7+osK#~bZWnsrH?&m*GjN2ai=f6Sx% zpN*GkPF7=5R}f;kWPKOGgy=s)U+y+JKR@@06RMcYmdMI%DPz-SIZy1Nlb1&7&~uqK zz4gV5H$qIyg2s2BaTyrRE-BYrMPX0>?r ziWox4h_X-0Se>m#X6nZlX$?$XLGO;{PHF!LLjOXI!Gw$SQtHTKeDFOv<@b%3LBXJoDnh zIci&m{EQd*C{A#iMB7aqAGBW5jJ(`2Gcn?nKJ$1t$F6CHJzPm9aq2SfJ)Y@R6LDjJ z=LT9_9~4B^hV_c7ki`&I5I6D$d<*=X)`A!oo!+yNVQtXw3tQ4PZCP^-OsO$>8(T01 zrxf;0bp73V;e6MngQ>1amdYTXgDC*h$n_{k$v2z)QXpxU+1KDp0_&{$9V7B<;k&pj zKwz0E-V5f!-IEd&^~QOycvUHQh*S=XY!xka0&OGip+q2ff|(Qnr>>*hp{EVM96H;PQIx$weKQFa#=NqkFqx@m!Y7l% zkkIfz;fZwEkl-8QPjM~58QKkm0ib%zUTR2Go*pMzFYZeRAT&g$Y1~rIB8K!$xUC?X z{z3n*#D6F6tluE7_YQ#??{mtvvOQqCVoTsuI-ehm;JJCDCZq!(d`~dON&B9lRSb7n zq{O4hyM@tm8{rBqeL6TlY|lHRg<#X6YLng=u9*OP#fa_MAa|}r7RN9|A&Ih>9xYwc zyW!C4ITXwoS$TzhdD65iuwnNo>yQnX|7h><2IkI5!Jb6R5e+eVDVYPS7u%J>yJ{Z# zH0k5YuMm^u=H;J3-LaDMi5`4jA=~1`Jw!eBhe~-@G@azv#sU z`p9$|t|b9gb)4#|FPZ!kBr*iC!G>ZcqHG_8R!z=0B*YJ+bv+|f)R(XOoo=KzEL%6> zB$?BplNfLEM^9xe2aVzFk2#`7ddFb3sB=DOv@vDXTX-RsfO9;Vd9yZPiXTawi_+m} znXE9EmM^R{78N#+MFCB2G}e4pz%C&-O#ChwT>IZM$ME?wkKK{DUoY zxmD}1kQd@tqBB14`K&-;=+Fb0d8+5w?p!jVt;vc~5Hfhjg`@P>*dK5C>c9z_YeVD3 z$voq4J;}Ia!?B4oRnHW5`n|69UB~xKWQu5WH(#6_ixH|R9gdDF%emOPVWyulQkATt zldxGes7gwSYk;U(X5MHS)T}Q%9=xG*tKo1`(4e&b)!4D#*;e}0d0njroiTA;`Bv50 zOGZY$Ow6otNt61_fTeD|{-lZnp;rgvXb))py^vyn=@?%WGAQh#FEDlfwi9Niwe@=@ z7s_?R2Hz|z8hH#f z^$qa|pc}zgq7*bw-jP%h<)x(|o{4Vmlt}lBZ|#fAQ6!Iat=R?=#q?@G6lX6dNa2xX)iLnpa`n~ z;1;sQ8$gYiGB^T!X~hJg3ej5oifjV^gMY;0LcUoaLN0+Q>wn=9K>GSS*%MIqnxfP@ z;46~3lo{~Vj*H?6?Bc<7Qz7{=rnrx!;Ry3a+$ooUy}$AMj!pZTF~>GGhkhOzEbz8~ zMT5LI^QGyi9OLkj*DL1CAejfbFK3ea(c+y^^rYOXFXI4pHM3!-2*RQcb z^O7@zju3@mn*yK7eiAl@Rj6y7Rk_{ge0#3 z(WS7}9D4`0nA+to7kGt-j?M9Wd;lp|h%++{4;h1x2pM z`k=oDwnz71lf1}*H*Yd_v=qZ-aXUE?U2I61%T(U*9LWnt8tiH#8!{kYEu zuOgnH`>7G0(P$O=8Lv1@KRwT@5wk?+_iA38qcpo_&P{B5vNUNc z!h0?(=^F5jyDv59u@6N!nSrh~T&YDEP1UInbH{k+F0_xjK1%VaB6JBXUn#&_D z7bc8wW3KS2Q2dtv=UHDOryp}lY5j@m)}#$C!r{Vv-)2$djaeD3WF*g0oyb?A#Pw=c zws0oiPQnYcOSF^7fK*Ut5s#sXTPY}M$=l2lgH9-t+W6rd^$G3% zNhiaNny~J>^mvEIa>p3AeJu46GES^Q$b%Y*Iuf5me`0R3QcnwJ>!EXiTWEXnMqmmS zEO7&L9!;0{3~XFUL#9H)*B>Gk!1T>8QcaNjjfXP9qQ7u2ku=cF^ER1HsyCjtag<&-igt+6LsOzO{7q0 ztiVSS34TNPGUX%8LMUoqK&BLYxcwmXma{LZo|u9CL-UxpG09EyQ%_bfqtW4)c%pY| zUEit>9sab(D}I{fg@U;qz8@BoA%9kg7N2g?173-db7zX; zLhSQ1-=Rg#6ALv8YXxvbnm{Nbj}1woF*dN&GmgLP2TG6GYT2^2zp^%Q#*H1>C)mbPG7_^T8O>SiQU1(w z%GC9chFs@<2d}dkfgM|Rni*PM8nzOJI>X(b<)tIT&7LAW z2|d`wG@Z23$qi0D-{HAIUClGq>s1aqX=TR!?*l=(9G&eB@>wsMPnqDeg4(k6a5+U? zL?i8j(q0dvzvVOisX7;HIfsAhKdzn|?l73>{5k{E`_er75aL zIDQpr95jyIj0syCcih}hyF1jirsEhtGPIszLmS~(8?q`NgKl2+KbTA=eyuc|&?W|S zNKXTZh7})X#PR8ov{@PAp9syl>zlext<&W7uMY7`ZrfYg<_loET{$=OzOW77K4Ay; z6HKA!A|phf(4yhDAy4Q$Qg_6pcJyU9U{cI1`DSF<-fh2RiwpD@ONuO*qQ|~4;T>)I zF@o`i#=C6%e}g zn8lquL32sG09h`cAZ~+9F~5P8p3)cQ`nf$ zW#WY7vQQjRNn%nUo(`Ap1tyWd)PKz2q}=`I)?PoY`StP(x$THF_IT`8J?!lL?(LZH ze=QadQ+>}G@lM!76&{>cyu{wdu5PM*T7%<5upkeS%Oie49wg9}{M5_}@+q;@M@zgX z@@&ylwVD{~R+Ro;IA1THaaiQ5F|y^mM8nyC++N39&c5;$19VD0AG#}fkM z^)hN-2X{O_LTVFDirk~jgAvzWggbD-%iCf4! z;t^Zdq+P_>=x-4{&}{M=(ge!fIwj==JvscLEhYb#2@HI0w?v1Iuhb^d>=`d{ZM5f4 zTo@0iv4;lRzVsU{9o5r&liGaBc@$2B9i)B5U4|cgJijmIEKHx+frty0umb7(M82VW zVCR6((Kp5WMVuCY!%cyPSR~>Ee2DdjcYxkw>X9p;GplA&9pIt$43r?Gb>oJtET|P9 zf?5J~5!7THL7&LYG60|wJweF@s>i@-AmC-Y!Wy!$YR0fCucRUKo=zO%)q#pGYp%W* zt=uaL+f7%z0urZxmFob+&~{KB!l|q&jEsmq!&Si+Tut{^kOQB?ZNaVybP!A7g+gKk zPsv4r0hUwxmq6Ecu`WBRf}A(JUAIWNcRWO&pa;KeeLk{l*7u~Le>YR!LSS~cGC{z; z{x~$u*DPyXRs0EeoBV%lK5T6IIqW`cfBYDCXRp6Xkd^-}3`^Rw`3}>Lw)OlWksSHH z@TziA40rpCVRUd?_qqu^*!tmHv)=HKv2^>zcowVOhnWPKcMev}d4w&?Ix26#KWN)- zmZhU6%BS8PZBgJj!lR;t-Sx0XpN{n>KOeZ$+$;Z(6o!&gpi8EyqVbuFn%*OcGK+6x zgOi06KY}e+Nf*mMZF2?mc0y8sb0yo4et)F7)`~fKy3U ze}qS_r%g3VZ^Vn%$!%F5d~K}2*(Q8%=9gDobl?o$S0qjeqZ74eQD*s$@05p5db((z zTR^H6RKtBX69@@#70CGrd+D-~e<&3dxL>9!$kMxI|*;IK>I9LicV5g>x3;T8!{u+9W`(p8iePi8N8>8hRkp)$Ql`)4^PRF*f zM>wuf$nX!`iv+Qu_qg-n9z#!825qH>6_;;Vs*Jr{zvJFKr$%S*u*Xp!2h!1`@TdDs z*Ohboa@fd)IvTvbZlQtvJqEu(CPAGN=O2-zT_Q0L2!DbEXP@f)3n8qY0jvR>Xdvmc zV!yUHWez2-(Y_#`i$Q3QQ1+q|TRW1SP~p9|`kC^igP@pbHzfUamva6uTI^OJ22C%1 zti2OROMHBO{~ColB|C!HopXw?qL8eE{ZS<#TjEKY{ zp9CKucF71{25MMXmed4qF8x7pfD2X};UORuYzkrtUk?RH}A~!Vm_`D43I5TidjWr`5at3|QC2l2#^D?}FITo>eGB z|LIehXOf0kUo5ca{v)aXvED8l#-BOM5$zLs_wqGZEH^Zi*C-`G_a*RUBD<@vL|{aA z@>i5sqnEvtKDQR>|Sq=iA4C75fj_UILZv4&)bZP=)_3rJoaUo?4}~_)pr&D z7PzcZo9_3h?;sZ%mg^o}W}M#Se{$zUXm0pOd>dVRn>;eNT8}4}=16j{CpPM4&u?2+#Rr6C&gq;o zt3UcC}_xnXuwUY_{K=QBY*{0YT#qy8BQp;*fp3n%vAUC{Foi6&!I zw{L6ZH%TY2jmk%GCC~hdCBzkv^W`@r--IsL;1FK%+>HS;uTuoNSLA);%lo_4Jfac{+uV9=52bWhl9KVf9u6_0`nm$jvUazv2_XxS6v@!7b z9DW_$utV&7F?UQ=&5xX$CmRJ#&DY>f%*_`R$)R@UOWc?u2f}!eyeW`#g(x;7DoL@E z{wtnDi$(E>ou>UlbVGKxG^A*v{@W@@JF&OSmuimEd`#{@OH1bV^-kfuVp=juYkH90 zeXK*#qi0d>g_aGB~dcody(4l!NaI@r)-!Qvr|X z*3{35VmC0F_*)N(xx^d;8b$u1&;(heuPeDjW44=B9*dhX;*`RnBirJ#Zz0WeKbawr zC!Is?J4k_g6ZH-RC4ZOY2Iy@W%7lvqF+vq?gTb3eNJXJ6JSR*@u!wpMZYd&9Qj)kW zAWx8yh!F6l_ei&a>gbXwJi*4~=QJed8Xa&-&rsbi+^M_~9+(5Z!hJ1fQIP;hOBQpkmWT^~ znEG7aC^WuwU+sDD+s4m&%^`2wMvdJ>isQtSwcaL@*+|-tBzB+E=8L(1WotF&M*yrsUk& z(wOALrHpV5?F`XYI}>c52cx#UeSC$HJgT&*{ECxUIvqr5DE;j6Gqyu<)1*1oR+HN< zw5H4);Aqz6WFznKW!T=qKcHajt&3;K==75J!=&}4yb#Sq4Xk;rp2Km}7x3v&YWF=^ zV?W;duc&J0j!JJySC8--FL;P+cg0nNv;V1vB$QV`Z(FE>QTSL-q2irbi_!P$MNy8U zC7QgUrbCk2=c8UebX6w@c;(chl=b&Sn{U(tidi>ajtU2V!TH-o0!?RCC+evW1x#e? zzV|(JB9yeWb+{F0Jg-Z)ypvhoP-rWe_qTb~w6E}9o3KVsNkNx_Dx=bSFj~{HI%C{X z$Em4#dRo`MEokAo!Q~RUGJV;&^ukO{>B7XkCRg?DGSkUK|KBB%XumI|3B z4`t19`ELd(PzuVHMvhZ@- zvhMYy4e?uS?;IETdT`v_3E_hSeD2bQj`88VDA~#86uM+y$?RwE6Zn6uoTzNE0pK8o z50xqYg|vZ8f`Unl@P`mLk}{G6nW4)g14T>rvgCFVu6u7i@Fw=#iuFdR7igDPlLueW zb(r^Y(_8jO%CsJu{_Zg;dK;BnlcKhBMkyUON@1eH#DlS75|JRQ32X3I;oUJZvKz(MpL#TwC+9inoin94SS}%r43Y1Vz5UnE7Bw2Wr@ShEaWP?C2 zksv0+f3U@?H7V^zQR?}pI-Rhg ze>gxZ%ZPmmsk^Cl)gBtiO5_VO&A3o}?wjYz-P<=Fg&IR%ao>!2j+z#kiB2@(hI$3Z z$9KvL1!fmrQvVvTSZSk~;Kx(*R=3Dcqpi_oHSld;piRP2-uaN3%6-B4l~tiV6Q;pOje{~f&g}M$Fd&(NQX&1SQ|M2Ij_LaIFdbcG=ZawHsN0H*Ku$x0y)LJ4T zqZo~ZV6NUi&FjH|&1Y3B95-DO!Ac5F=f9t>5Efyn^&0HMy^J$yg`mz!JjSA97L)sW zG`?1~4QuK0)Toce>3k?1s0dKn$XZI@m99%$s8W<&EyxB>>#!Q zn{*?(uyzcLiKokyhI}_hGb_96F;wTU9u2I!ncBcVxKJLGD zl|Jc5tn~f5phYfm`aW+)XfyYiHP{$1_L(mrN|{G4om-tT{W+AT8wpKE*8xg}Whm0D z{QO6xHMjuSg>o700|_JDm0E_{(=3tqAcA`z6cpj9hc7Mvsy*A&DxM4*-iD)}w9RaL zY{3_%wmbGr*2}j=4yp)G82VjZRZ&b{tz4;Xdb|`ybbnnOrVXANk%Cl;Tz`m!;y_(v z<1jK9JT)f%3ur#|MS=?~Fe@sV38qhjB@@9xvsd88K#2vsqzc#${Z$IfqUUfRvw?A| zuMmF#dYj2INU#SvRIwSB9yEh|~x0E#W`gr=*oZ+AOtB3-J)@V0Q(c z(Zj`eg+Feod%d&rCyTEIjg`@om{&JpThF#xGh@cqP-IES-g~2QnX2tjSw2A5POGdU z*qi(>0tuWos62o6Y^S6S+ikXBGwutdb4UKK?mON}j`bJ2$@?S{DSch=c_h2~3Gi(Y zGmuB>MLWes+HoefA z0!?h0V^3JD&L_O;RU7L#sM~ls20Z*qyf7Yh^peEcVYq#=&|4v~MIThmv*`i&;?nbq zGF4<-jMx4K6K6P?dA$-?)#IH_bKLvKC)0r;Q_=j&qM9FU#l$=u!c%5dRU9rA_vtx# zRJ7bO@%4%B#8~)wHS|1Zxec#PY`J`kHd{ahe2&*#2nxOwSBbSw5q27N4-uq#U94CY z=gN$jg?Y1VDm$MCt1~pm&c{f&#FRXcyXTHCpu_$B9IJ21@cI`wC(7OP=kKml4h@^? zRaU_Vf9(9L8RAJVHj&RV{v#c6+g9xV6D0V)vebG@e2vqWV=AR3`;+3i-rF+)Ue0xA zTkjc+XLnTJ(*K@s(_LuursUKB-Fz$WMMsXhWNLd8MEO;&e^;XV*BoreXN|v^JMDt% zyan*iryA|~13e_|(6YY9Hcd>9Wd1#Qk95n@cXE%@{%a?zbCr^(zIxS^i%;fyUMyM} z!r8JF{~EHg46U`92)C?kSD*1Q3>u6>8yKYaF&1IEJ)?{@eT(mtbNHDErC~U=x_s*o|E-bPDPIgq1LUG1#;YvRoN_g3Gd@jo0JPn9oj~5Du)J zXO79IU4GAvkQ=O+a{+`clg1e-yrapN#iq?Vk9k7Z2rECqREg6+BP?harsDuJ{gYS6?jL@Kt2U! z?ndZHsc=&dD=o9WQa%#y%*t;Ekh3QY_ToBY(h-NzKB{`@3?W4imV3k*DIwy@w2;0J zdO!FBu*_2f{a==*pxiz723BuV>HNF1V86Q$25t^U7K1);&xboB(u9#=U{wg9-!H`D z3-XiOQjC{^v|B}LzPf?4ao&#Rs2i~YtrP9}v{~QS+RLVsW}zO67{B1Jli)n<9rj=3 z(Bx!DRpE_w&ARD603&Qkwcna~ZuM0A(XQkoUoD>5JT_gry)s?&JzFndTE(O0=Qzyi z*KjfYu%u_EiplDOY^=R>CLpTet-e9LD)MT>_mSo${$FJJZH7|XRi|xd%FgSaIDV}C zZgAFZv3=Xj-y^Q~#Ohk`<0*DmOvJg_mn^lWE&L3d3@KYx&l2-cu<7BcwQ-I90w{33 zoY)C|5hdPLV4Ym;v^H1^$TFTviqG-d~!76leV-I_{~6 zd%4s;P#JVgu!9O`%Vu9VI8`ld#a79t#1qLn$#ZgM7Y)yR3KF%$i#S$%>EtsTDL>y% zvwoS8)nIJ2Tu|HHW+s`-)uE%`nIYMTRjEx*Z+NEmGHs#BQN1|rQlq(=bxL8CjnZK% zp@v(fB#lukqWq&!p?Y53F#o9Rfrds7qBKmgFI%W}MD=g+@_3^4^KzF-cGr(3^22!h z+M=LA2aE0M)rmeEv1X$wUX%G=;e}d*qQP4jyuRZ@fu$#=*C#IHG#wKrA~s+8d>d2P zTna{vY2n@CSB9c-d!gmM^kuYtXSd(d7enmuleH34>ge?P57W)5QbMzZzzmkCZws6C zCv93kobw}XnzzoT6KhPVvmwOyX4#8z8)b%-3+~(ZEiC8Lvuf4mXKh5>g*nz05M*#M zK|@jwa+ah6uNIXdiXg_p;}lE82S_LVg%kj)%&gK&QaE*#=UHU*`k*iZZ!NN4lDz6X zwNJ>t=KhrVqogim`q(#S&@JGI)8I&MW!FLWM0}hUCnqG9uw)Kv1MNL515Sx7*Smsp zLFH9WB8vdj$U{jx5N5hb@(9E+xhp{go{WjYVZd`^LZS?zh8ZaIgV3`jUAU@9)QTG7 znUE#!G0GBfcax^j1TrC%$lU`zBwEY<1nHAq75uN-_ zdBBp@3Tdc_F|GocA@mxLK_W%;DfQB?0Fks~6dz!RVlQ1PoI%N#N(21bMw&g+RoMEK zXPX>O30*WCa-mz|kmKJO&uSv$W0)QGi^{KdrZv8b%hAuEV1NVSzpzGON2ZGOdC+ij z39CK@3OxQ_il*E>4s*6t{if4{9It#)54^diBK5%056CeRFgBr{Ks3ruPiosn(zHpD+O}=m?zUTP zx3+EDPST_{Q=4o2*5;di|2cE#%*ma(nfuH+_lwWdqJ8PDSre(N9(>&U$UZ%ErN6>O zFPL|r%gsF*IQt(CZ1H283|IMAc{VoKTXlYR+_I2szmS{_Ov|erv^q`eZlu*oXzSP# zjemvOx%k~rfr-0(h8kEkyxX6rbK~}mQwxyiQg9d8(tTy!BOak8>54D;!-OxkO7Vpq zb>XzOk8?zwgz=(RR~O7yC)jLQ&FyX2#|Z%+&$wFDb%^!S(>#cwc=w$)To1Z8pBRtU!q|in>@!6&(>+6r}QB zWKPk(viCjv+&9usA8rsx$D|ECdPre)J4IG;tfSk98H245P5+sh`q@-*X&*=#@km7W}1pG&K*^&B&m*q6c%t4CO26>#1*ux z|C9KYuyYxV?>i`_oQqga;`c`YfOZvF+Oek$@b#dLV+L^TUg>3es|ujiP@c zOfxMK_ds{cK?($dfF%;SAR(efEqQYxt7R31MyTkrs60f_0XI?#@~_y+stG<=>65jC zFt1f8a6!yhdt?{DjvH_pSJ39By-c-${w}_>A{e}zBTE1l-Q$on01qBIX=lm`9h?_j zC2wHA%}ftE?>21f%_SVR59c(noj(X^u}M2u)*ps*A3s+50(HasNFu@VYxl$w`9pU< ziQflx*`<>&lG1TM!d1$#O4$M?ffTCjKx*JG2RfQPsw%HcE+h+i;FVAYU$S?F3^Tv8 zCxND_;DDc|HV4$i%f;Xritwy)ua$i6dl7vjXXd6BYbF`tF_0D^7w6tyGNm5q_@nfh z29IlDwV@%0@6U=7WBW*zE?>vngqMxUES((bLAI?sHwX4De3qR)#K=Ls8_-JL6`+VQitE2CW`5k?VdL$ z|Dnwv?_?0fb|A!v|IUdu3MB~erA%X#Z1J3oc`Zq4H{?zSc6ONYwTBqlRr(HqUt8}P z6tXL-6H(U_xPpuSX_Nam@CJ~~@dhvq2!{;<_yFVvrVIvTu%KEWHc{_fc$d$t{@}F}zpUP@6>85ngJvtOcHYB$>;0BBNXZ>(n`cv_*h}Xc zgwW1o+pWoNEX?W?@;BDO?i`iB^~7=#9k=0Q3Z8m!q-z_9+^-$ipXz$ZC&T{>0}^c! zLN8Q^Umz6ihkl-{ zfOrXg7+n?mCF0y1BMDM)=sPqm(oY%-^fR|U?fw`|=pZ#--we!|Yg)^zh&-rummiU! znUH|t^N&t}q#MEXGlQ})fs^@rGRY9CSuKz*v4Quum$fehEe;D5f5U=LJ^c0UlJ^Ty zL@lekb(=*<$36QU5tPRQyvYD+t2rcZOhRFcFPvv zBn*4c)#6Aj*vbQU)P$??bb8PzKLxoub!LO(&aesv>1x7x-`|%B>X&b*>YXqPsK~Dx4RhSAW}2>WKSlan zmSH zu1hG-|9>}R_9{GIKo}axgl}RQwXtdWLi+E~$-4!*XX%f&6T5vKM?w^=VGSluio_}w4)Vs9E zXAT;`TaLGSJLItD7#qZkj`?bav%R%z%fH{o;dfl?5UVLt?8 zW_96kXvtEV#5vBL{GJ3J^mxM+=L>1Mx&R*#`ni2BBP{afkW(g6B<|c##b4_C`I{v}LG>!fbV?3-1vG~#e7FqP+LS6h&sSrYG}%YV3X62FDH|Bd|3xo_ zh#E4E1{Q-oKX-?AR0jK2>kh_wch)+hE$_MX@NK2mlaHt!JwP6}{+@NNs_Q?Wf!4fg zjWv6%vETTcAD{W{P!4>FuXijE{)NX936dcM&&?3YFoP}UZY34LJ$Jqe#T%DuH)yupsr-Jc}j7x``vX@v_hM5oqNDxT{ZsObNMwFQXpgXG-Y2&b!G~!S zT8tdlRRJc0Al-gIYNRT1xFRY*y>ik}BT)Q!oPu9Zpud8Slz_n?l>@j)eHEPnpe3*L z!g=KY@g5{UAeY$94ISVzH^?ApPtyOECf@Ww^Du9+S6PQOPqxQfACWiSo2@@xtkTD9 zB#_;X?@013e{(F-V|(2^6_vA|U{;FE-1o6j9j+)C(p;=4<+SII8W$BUgc45Oim5=u z=R+m@U{*^dVslWyDi}^I6t^4%Z-(XK?47M(?K_%M(!$~gpXGnSyN^ZXdqw?DLX;ng z^`2|1vq~~twCklwC0x227RfDM@~b<+`!2H7n8i#;;y;b0`-v`bk$l?0E1J}#2T{uMA@4U(CK8m|h=r3*@|49eJp z4p*9G=D>IB338-hrFIH^vG1V32{GL|mQn#Ju11T$`o>_c&bTGzep0V z^ODJeyjJ}URVPV^{1ehg_+L2x?{99!BWFq1fO(2}VlKZ}wa*n9gfYYZPMaLaK-l=2 zm;TrD$C^^tTVZ_)#ubVI4+OwwHZ9$Z5Q* zPhFP_0XKfDCsW#2e5gRA$AxS^Kic!^b5{~d_mZh98|ifxQ}SY=@tO=3z7Tz#ho0T} z`~rYgXk468sVB9e&-GGoc8_g3v3wa4IXLPn>ehtH@&BvqOXLIeRQ^I+3%t>nX2~Mt z(qyHTBM?)85Uc|LGDieiz%c0=U^Y+@j$@7DI^h1rjsQG{080QP2O6&&=taHuZ-)Bq zzfqWuQJpw3ghg9~tF6A&Tn>zAi|ra*{^;#Ijm$>(l7{c;<`pPGUMpKRXD6DZ#V>N2o^j`b$OrSY+Z~p?3Sx(R8;%lq%5$7%L z5Q))}ot}K3$+=yc+F$75{njdWWcRLARMb@4&R6Go+p%0?Kjqahy-k>^<$LN zPKebRqIBcR0w1}!s$jT<6xl7c`7_LtTA?;q(~I-(U>S`TCWV49^00Zq$c1{i0nB&t zG5k~*yqqgu3+-KnNg$vvH#H9+c3vD&4Je5%KL)5H{Io*3#{yH z$umI`vCn0X1-~9c)H+07oWKlYWMSt4;r$i@$Jedgi6=*O6P*>gCst+balxnmIX~7G zJ0aH1hbQl^$O6FUSW@Xikluz8+>!Uwinl~C=*b$b2p?Z~HRfKbyjD5+c9d79yNG{~ z;Ab9|e{YlsH;#W;Eir+&2`Cra1ttJOMJoa0z*&VXf(AS_xh28{;F2U4kstnV(M`Nh zKorOr_oE=mF-8!v_|$Xp4C|S?HagAa2gS5ouHeNM)-KI4S@WR?FW=S+Pt9JQ4e+3tFD+UV=SXg-S9B0b zXIDLEC%|Ik$&iyD`K}A>SNXketDo-#W*e7HZr;zhFN|ELEu^n)J!0HM zN7mKQxKmsGDuU|}`Gxm*I~cnOPpG**m0(j~C}%4&>_vas$%YF95hx2j%B~>ml{Djf6`v3@%6TPqQ`;D-9m4Xc^5( ztTsrpf|#X~Mu;S+o$omiT#zFJWeJstkzwitg`^kF=K_&JP=ugflDfgrOZiTD>A_!O z#uBM5R&2F=)A_$Cxfrn7MC3R0+qrJkQqr8#b7 z%u!!HX>9ViK^67F=yBsFlG6CN(_)(2)T3K;{?6RKhhcHTGHOs`1?dPMiQQ(1Wkc%i z>z7iZ9`8bulM%0XUU>hVGRJ})1}7c2)vdmu?(g#3Mx*m~ z_SJ```jc_kht?&7G!cSIQWe<@(cH!TQIHnF_b7hoGr{~BKO6;-Xs$(65qf{#LgcxS z!D56+vEcAJ9{d&T^(GKU@0Y<&ND;&OuxrvZP}2hq=`)znDLc;L@$vaR6(9KG#jI)y zT=d*s!w`oYCQo4U zBp#3GvrEpLUAS%=?484dg01$><|7Mi6;3~=5qQ;}wZ<*E+n+VKbsPLVDblfkXYAR@ zI`ez&ib^_w2sUcODfs=jrs2;(wo6_boRET&*sd35#?=YiVqqZVV$ox!ADoT2>IeWF zfTsp@hpXb*1ID3fzzf_v%m(BK=7^Hv2?IJIjer3FrywnErLo{GffU{dj z?+PZox(zb5;iFd*G)?H-jrnl%wQCJ=dD2(TGV$glxhxXxd4AL7F#hsDrZHiB{$R6J zc(4L%U;Yivcq-Z$xpHvZfI_dx-I`2ath~R|pPyb7ym~ozu|50j{Z4!>-Q;SHzNykf z5xE&}SS!@r)irv6&2}gOu8_unv~tnj?L{(BZmp?@Qb^S_a~ z9Eb&y&%rr`t70{||T+HQO{Q>wWY)(jg)p|du{T`MpbA%mP2N?N+nl;>3Pw3|sk zslL(HKNul#rfiH^CCsAyQq9cfD4;pKRz&{TQ$?BPdiG$+O(6;G6I_gETlH70d`) z8>gI&AGX+_6-@3rd}q^5o^&zH$C*+On5|?xoDQz6Zo8WgHEte8>>w!i5QTDKSh~HsKcH=&bFrI2qpIlCVu``!v~&v)vfzWGV82g3nY#@ ziBdI$cOQAGYKX5N#VOH>`CU9!L5nS4YG~9*JgJ`%XNR=7UpmsmjqK9myfu?tIP>Dv z_e%Aa$wN+&#pfT!qGidoxd_N^WSZ!r-~MwtC_spgU_x@&$V8~DU>vE^F&ZJuWr)Cb5DqfC> zZ$61@7$V+Ui)}?39DmNHK%-A-3qDLgyojmWoSC~4?hToDx_mdmIA3--j^doxyXu%u zUhugVoZ4LsxS^X8Tp_;YLH95Jy49awSxmg@SO{Hz@|0mCtH)#heMyJiY3z(tfZu4H zuZgXDZGWugbZJPOx3FkKLT8=QOoe1IffOqHWm3B^DniowKEICfH-TH41Hmz(0s?iC zqklSu?$XT@4OB$k_tN3R)>bx$k}O&}1e>X~9dd^71f>>{rBWov`;*L3?xw#ZZ>A1P zJtvo<0VdKC`%>5ykuuS9c1)J4<*HYX0}Z(JB1R~bqGTyM=|HRy;e1irH_WNYyW}x+ z+^NeHM|8&N{3Ja%rN8A?@he^$y(;dg?92zs{dIU`Y>4wc* zTCkj-?d#goMYr9Sdfy5=+Iw}QieGjn8+l}BZULf+Cw^?B!da%iVwFAI zFoIYI`*)c7T?HEvH22OAt5i(=o|vutwElsm6BMnwTjqF#QQ0}Nfg-4uTg}*zh)qH3 zPpyYm58-@`7!C*ioT2Z6fsm)8%!1AW&rs?@zaXe-Ip|Np-I+%sc#y8S6|r>a!op9f zJ=pQ8tYiqZdedI=1d84s6K{ebc0rPrg5C$8a5aRir@~5ABCvBUZG?E|S(4f~{O#$r znxL5VshdWN_{GT|4JUDigV(Cz@QR};O<7T+jXQAw43ZJ2p)Lz_Z7ZQQHFAqCPBJ=8 zSRPNZRTx@6&8)W@`Ex8WwAVqj&rVNjwEJhyBp^+b?#^_TRSAOntfS}mx${aqm(M>@?=9EE8eGip$a*q^bO z-bt#Tha0a-_MCVby%f(pJlC}orQCb3FoFBF9g}$nYTqxBX#&^ptw?DIs2n=WaYCl| zAQBUhz5Oupb`Ug#L2!bGCdt43P^YKo<0JeB6_%rxd_r-wxDFiL*VzZW3*d$TEfBY> zf=Yn?03JSK+;k{EA)p;-1?mTA<96G}z-qt`t{hzSgHGR>{VDnJ%tYNEb=X|)l$ik# zeLC~l%oF)#LBR@!Ok7oTBSK~F>cnzQogdyS{)zc`^sLT(8gfEk&obkAs?!iMBXshk z!hbsQL?ZvwG|`D&!PpGtIi^Noj_1m@b8*h->Uso!k?)3hdUPr0T4T8q*KJ3(qO%Zt z?XU!0620M{yIFd1%YbQLI==Ze`((NBI(*S*ljWJtc3qeFY;{4m+57N831-)V5>9f?wtDvTxESl~m=PlEV#DrBO0c)x?>(l7p#J9@T<-J`Y3} z*?2dM;Ll(M~}qI=E}NuCh`k|6{?z@_~A{5;%xs>4*Q1GS3L-0 z+qB`%7#-7mx}H7#*21H1GJWIH58aXa#D#i&sRkkWD+4>miscF8F;=2gE0fNa77aQG zn9;lDcawh%=Q^%14kmyB=%Se!=Wyj(s8i}_`$m_4?C7Jd!Dt}j{x*vza>jHw#NH9z zjeT$P6!QhEVit_f+4Z(;o|f8Iv&)*E+*fnBz`*uDJ6TLu?sM2BOd72!nq49I7h5f( zTKH9Ngg9%&I7#^y`v4F_0r}ydP%FsWkrl|TK+Z6Zz#<5kJcY(U5>XDKr$YHNFX6jT z<~cSAC8)(pngo+j$7Y&@GLDz{MS=^;vQsQM3B~O9Nr%8>4jSc(MQo4A6hcKlpSG)| zi*ucMs=C2PPeoPYL^O|gRSZQtu;of&(3JUa;xVx7vUBB^iqwH|RX~dvFTs)^!=a$} zEk(xUt)=_?X|KmGPn8k)jUnsRSrjw-FR5om`v}q?A=>#Ub}K60mP(OhFrcqM>>0oJ zC`w!g)QtKez7Lk0=9Xm?xSJ)AycUR=o5EEnL03Bzgkafg&*Vac9(U6Rg4im*eoQNRzISy5tDP!(Vm&>?j#V*4dC+FF(fn9C$QCBx3?2GX?0yA)yifyLVmM8;auih z^KQ}qd7{Rr&G)pZNA6_iB;I$1@k?LYsZyz4CQ49x z)7_LP&`hx>j@*ME$nuX2iXX}vbgzKjpv>h(%-3x0*(T&Ebb*YF=LR9s#iWTW^S< zGP$Xx8rL+a>!qLWF&-cOyc}d!J|Vur;IuIQY(v9?eoT3*%`Xy7u=B%1e~x4~-dP>< z5R2;>M%QC0&Gs=eSUoE!+Ie@^288*r@9OdlQ+}Z3*nv*jU9^-M{k%e9{%(?g=E`cT z@;{kWut%*AhXSun+b@0^Fv*|?$W7qOSczc1K;1;B@DB*{R4r5v@?}~?lwa_8egrNh z2w0GT8$p^^i6lLRO1E6aUkf#FBPAwJIdItxOsL zmfL(SE&&2<4oOn*ecrN>k>|JHiIt89{kKac|9~HLh)_Ef@;jl^UJ%v0K&yxgK1Dad ziaAS!?eHz}>ex1cvOuVA7`X)Dh3!0x8co|hKnQ`DQiQm>nV619EJYMa7Bw@#7N^-q zcnClqOB*l|FvO-0Xaz{{E&~mK61*ThWnei6!Qn~ht=yP4cBTc5cTJC52AxwAg^ zS|_<9-OpQoar0+&YnkR&d(MAJ=bCgb25a_Od-tSDszWvoZEWM9C<=4vNnO{WwB#@G zGXmCeB?yW9=nCuSQ?YM(&`hL2)|ghGA@{c~xB7$Zhl<~>#88_tkj<(N9D__G^c6;4 zTm3R38V12F#hQ9-1zZFf8;IE=*jMsUG#a!)IjNNQXsom2DJrPja;~Ud=(KVkQI#{o zJ7_p=Awq~%F_5J0@HprzG^=@(^@=06@BxiDV^qN#(mcAJ0#foOx{54)3S;`_EDNea zMu{8`((iQW3?d?Jn!AV)d_SVh9K$RZxtQ#n$xyq!9NwW0`}@TLhz*~{Qei}|w_Nsl zKh}aUv$kDZXEe{PHA3rG@w1Lz-P%Hl_DA}a#dBR#`Uz!3{Wpf6s|Uu4%s1=$Ci6@( z8?zP1IXF$^IxZ z%db(~#SzCR)ePc$4JPia5C{;s=#LhF3CN7b3QmCEBl=+c0{NI>kv53yya(JsC}^b= z{#yvSDGOf^6vaZNIRqbJpGXc01?&mPZorfdJCwJ?Y|ix6K8jynLR9+1ZqL?L6U5Sv ziB(TT0sC0cxX@q7%tye8(%EzT&j*FTi$;H!MrVgWN9K7k{iIe#7J1HB#h5f-fjwC z7hvs^74L&^4BCiGf`Fsj(uSbt$PV!)@C}Ai;(>t4%y%&Z(EP$EES|4&ISl5{o4c$5 z<>7T-K8F6}!C(6q zKgPni^6#2c8E^nl<0A*o00r3>{>?bh3MVpV&E9mC=n;<@47@Th8Xg+UGGZMuKo*)T zP0Y_3n17voxRK=c9z~3uy;qB--+h`IKc%)?o3b^9zaNwmi{3ey&3uURIHJn^f@wU{ zDSSC=bDmdqybyf#wB^5ghmDO@huiYasMYs(vg__E z<#)PE&Wn$4zRdP5{JnZKdxFjRFAwXP>s7Jl7p_jFc_x@;{$F^iN|J?6u8?kgjZT6F z9MG}b&#SuGqR^PDNZVr35vT0YEEAtE_G6gE=$AYhX5e1BODdYl=hplj5uy^KBs6{_ zL?V*WI>Q~pU0E#77|QS?Gk^w3m6NGL5lcm!Ax9oW6O{If>J?pY5gQ#Nliz?k*hJWG zFcwTJ$Y0ON7|5npNJO*2(2%o0H9(Ka@24kbX2`9hW~VpL5+iq~Jqtq?nl9?sg5GHWe4L2h2k;(hjY zUcE*Lmn)w_YYblssH{5+)C6iCk_7XBLlJ0!Dey1`BU%9An57qWhg2_t#3Y4*o4OJL z(3TxAF8UgeqyH%irQnF!ywJS8JGl~=>HbGqTUg;?zMLd%Yu`d%3Yxkh4ex`D&pm}d z6$)4s*4vR5N61(TNjKLkxEU)J7mh|=YJ&n-v!u08!XEa>*~GeM7cv_Wg}&>3V{}n{ zu$7WRG`P4^O*fTsJf|@SU8J@ zxH7>Rku>}NsV3Y7cnyH}Ohq`c5?bYoOfYyNE1K(cbqCb@e(Ht}u#P;?&+Gp>!D+NG zh>!9%Lk*`d{dCS9%imlN8k>B-%@v(6j^1jycZaaRHbm{AqW0S2qo!K+N0U0HBo3ct zbj)0zQI-CjSGXK*3YjasvhSc+D8JDjD_eSZBRuQ8d~*w0c(l5HXR%naTywj+@Nz}x z&U?Ob@#XE}touUt)zL6C~Z^+Jk3$N-aQ2Q!MhhYl{w2enMgt9pBqnFL*)Xz|Ja@W!mV=WMT z=yl5l>r1wYa$|aDhPdKhS_Zn*{3)Fd)n8pG5m+$s7X zwgNanB^g=G(M9c#K8iH8&i!2LAeDNc#fFe>ox=Zv&eXQ@wYDVr` zofJCttC(IC*|p0WrWHY(t_^;cTDK+Xv{cM=gAJ%Ek^N12c~up|?FMh!w-KMrbo(b~ zj!g{ujOJ@hpd-br78d4{*ljll$_evrKc^A2*-nxJ27}lsvRgncZ#UVjPAP8(+mWHq zcIfP0qx*Lq93rRicfgiwlX2UX7WfmLJF*tLeR^93HrqppfqG-<6b8N`PJ`^fEI+un zs)V_;`JPnMa1Zc{HRADE@CJ0L3nYR12Sh-QpjKoOtO(LN$0S-VNH}+_9tr!kL@6#U zc)pq;7A4TJaV^dQvBcgJuMjHUK}${v$zxlj424Wq!z9fh8Dl&U5fD))g)~@nqTR^# zhZ?+E=3a$rMK)O}gCQ*^GGBjpS@Gk?#xo7tr{qjODvKYTMIYt9k7f_!5%6K>nftX~&!R}`g= z^?-VEi;1WZGK*7Xa`oVDnMF^BqlL3*s&Zm2VoAsXEW!am<$-m3Cx1rO2R+w)8%&M=b-JZ>{ zukzpJ&F-uW-o2gGTSneGEDdb__dIY`(BZ_2Pqw;mV8AN6sWv0}QN6k5l)&POpanFYzzz5iMEC^3M8nTk6#}Z}PG#ZOGrir^<2Y+GwNgGcwJT zq1STy!i2A%Z~hsM0OPwVV>UIpv-!x97eTbGY5y6szZ+qDg%;YnuzP?E+*)w#LO;Up zIjv0x?~8ieOjYkTIAkOCw|7lNC*yVwEtV$Mw%e_|dtI<4_NRmAZ7l{r69d^EG54ph za42xil~8js@yL|ha4qrNHO%v>@wGNLfYu?ot@(T(`0KlMLH_(dM{S@Y5L=|7qy_{R z7!_`Uc+YT(3JE04dWiT6IAL6cA3$;@vqdch{&WZnXz)GFr)HkyHpu=U2o~tgk8zz+ zNh@5=X)s*Mm@R*2Y?u17OT<rx=dK@!K-j3ne;5NOgrW3bfY*|+4R%}&n~gj^mA{lXj{Ho>aM(4<&%~$ zBUC+0m#FbVjn$yAd02h)q?PmSpfYOA?Rj58BZrNLrI<<-KfdJBKealc*_COv6AMzt zqy}wNpYSDuIjrzH+#O+@*;h0+Q=+CZfCsQFeCC! zcd(vN_>YFC>h_*b+*n}Gl%CUkqZ(l*`FCgOP`V&Ozuu z;J7TFUHAls>ySBdcZTqYI5}_b&)Hak)WX@dLDT+H?k#8pw1m1-o4QyDy_=bOyApku zgb7^Pd4!MlTW+}hh@n_pd-8EbU`GB>r|niXOjMI{Utx#AkK(}Qhi;P47wcO$W~r^3 zpP5P$Jgv$lGBVh5Sbg979H6{GCmGlCoytHg|JJm2cItI~FFIq;%-qJFf8^(!RS$Zng_WCjU z6Bd^;1obxtt^8~1ZU*K&1L_C{wHz(75&D_z9twL})wBm>m(;Hcnkje~@G|kp$!W`y zPDuo5WFvk92nb)tTBtu|r7tQPyw-nQ!aRA;`(>2?`dR3+DtYwx0E&v&6HYFN<>4ba zHm4Q8M{+G|s{}@Qt-UMlhK_A6%k2hxEek7!2G{HxD!vV#TAAU)N5Rg(Sy(E|WzGXC`;SwW$F|IfqnaY-_9?}H`SEH zU(Nrk^%E~6Z+qhjCpULW%{8Y57hB^fcR!CsK_BZjhiO78Bb=Q$9gXv|V=I{U7*;CD z9!iZdBzRC&kfJ{y)7nC5QIs$@GUJ?_Nrd$Dy3A9W{TAw7ue==cuqEI_#e}|B;Paz5zs)7iPEu0h@CeU}?O3x4fT zEnPh!?)%3!<|4##uRV1{pCvm#@KdtSyq83+@IC=uU~=E zK~#+m1=#eIfO-VYS_;?uYD|v`M~D0ExJ%wn6?*=uV_sDQ21+CECfX)!@IG|4T*7lgUC>j1^u^^q!av>`9UeRIMpXw^L|o;%j2p zwXS{Awy)dP2G9CP5}xam(Yobl9upJ4 zR}Z|jkUpDu{%Oc>+ps{%sdnsb)bnY|z3T+a8UCZ>l;ruR7k-sAiv`zOeTU0Bw?|{Y zmjrGv$ETKu?&c7r%i4FT6A}xoH~15PO~%)b3$2aF{?Pjv5G92eKu+A3jF;R;L69bq z@xbt-z&4n$n$SHBvfZ!e_&|vq>F9va8=H)Gxzu@t5ODu)qA`_dic~co{SEVl-ftac zU}4iK)})%Ho5+?V7onO?T_t))QJ6L#5<4CD6h{*`xA{lTD0A+(3TX$9qE zxszt4?>L3kW<}!2vc-DU_^6;2UZweHv`t|N-++z{d8yujm-UN^CqoC;+trK1GZuIa z;}ZuKz1~54dbZH`!!YyGs0A}3b3?^Ec##4VI;o)fWDPs`T>TSn@KZ{gKnSkenK!^7vph?0mFZ+A_?^jG|Vrf z>}dB`euNHDq8Ofs6OfS6BjP2=bD5+|514e>EppoFqL_XLp-2Vjcj7SuOrVb$ubj+e zrgLIS>J5HmRW(5^CSz_}2dwcThPrueGNLI)U7Sd=r!WD2e+#+hm+r+>aV~#<;2T0x z3osV)%Wlgv{_6j@hS`WI2->2q>CwuHO(-H8B|Wm}w=ey&L=paCwD+{Ri)za7fTvm2 zZ_8;>R6L~5FcU&}kJ;vf==X^I;8E#_*nsq7HFO*{5F)D{8EF#;BaSh#QxevXZ@V8N z7oBllC$57|`_MFE2+XePp|Bz=9+~uX_AM4eesK55Nk!(np)wYxasw!{4rVukLQArC z%0gB%-i^omWCrr4E-6RcSEvq>U&|^TTQrc%Q^AOvNatzJX`2@m3@@Zxrep=r4qB09 zA!he1DpK7rW9IKNo?`;6i4yR~IgK;Iaykg~;=EoYYb#&teE{Dw-SCP4kO0oqIzK@% zs`@YW8G1<-J59H`^i>~P7xa=F#(Q3yYBUZF6_|Z(jUMy0{@!zqw6T@zhogVl9ge~m zavgt<>n?4$)KC0cEA%o!R&0)YpP`PoCj*Qy)jPF8@tEm7%ss_f_Y>{h_4%=jmNt#0 z#+!~_`o*f->^_+#jhmL<$|bIwkuLr@#8q3D{}$hW&xZ}8tYS5E!l-fG^#FjB8c9BF zUbLi9y9BZje4KHG6{;C93WXDb!72N zs$g1ZITf`BeM)%%#RffIX&EgZgJxb3^+S59yfN}VI#Bj!azA>fd{@dfI*I&viYx}s zTr3$O&HExR@^^Gr`QxN$y1IJ>cO}z@Yg8+_{IVo zDJ+BcDG9&$dL!RvWd^G2<1T$=@#6ib z+H;~w{mI@&hW0=ODC=$*lLL{cL1g7UJDJ`n{1}8HAfnn%NwhmE%>fJ>k2Lew7dc4q z&w8q&9CMfdN!=}>t4Z0wA)9dMsoj3g!34QWbT&US#sicQkC_V6$(Ee+h3UWo~2i;3^r)R#oU1okqdsuyrcN>PAybH*xf$J{VcbJ)j7a;Th6cLD4 zwd5RWS}lvxWvi}iNzrAk|JzZmpHr{eYhs*P$KNk%n%wwx*wOr9C&xI6HCD;3uUIO<3+RRV_nPp*#f%t!;iH z#SePfoPDxj+Pcg@iU3;8oDC8h`og#s=61^BLemB*jp0Jdi65?=)seFuQ6$x0F|Wdx zE7}n!e$J(xqooeTr2)e&HtZF$BVR1calFL$=ASBC205(_E5SqDmM?4KMx`t*YhH|p zT2VExBOR@My7%T>tT_kI=M79wMp75vn59fkuUA@L;s6c5Y&IueZ+@|3MVswz*r%fB zv3xdAv;&Oa=ohDcUTXG&tVS+!THqI-g(v*t64Mg5l5WisJQ+jle3R@M| zUW}LAS5d~KuVz)UzUlf72MSKvaSpfg!-aV6Zi+>fswH(?gaJgr|l zFI;GHmRhx4mZETpXp1MYzj~FNqVxEsmx2ij_h@ROqu0RhirX(z&h5b3+KMlpX% zj@F<#3{l{Yc-N19&TW7H$I)5FMfJRG90UdFExKWM2@#MGR8Ua5*`m9da^EGc)&G*Y&kYP5wLP=n4z|)1qmWpZ$T};6B}TX`83i zs_*QMP!oK}d$+AAb*}8O_QFaRHxZC^2Vr7zT*@=}i))D5vk*Q1!ZSC+tb-c#))I|S zQ7S(1(kNavv4meK>3Y!E&t>Drm?%^w!}v_PNcWy~Oc7Hs+NcobY)SaEW>8_} z^|?n$Z|k%c-)0nHcUHU8K4AAY0#gC?*j1yX`?bBR_?VkD!n1Ngf?21>J8e61ztUUn zo|m1T`GhE{`?+)+g=$(}74!*didms15t=$zMT-WzCboOK63Q3ZzaoBR?^Ayu9AmkM zWbNhM&~dx^DD6@KFP8_I#lo=DZG}6>;IQk>CdGU;g z{nXcWdeCvE_Rhzc&ohgA;M7;MV%Pi<+h-yB-{aKSdwWVTt*qd!tq3wZe=W?9-2N8N za!jaBt^a|#cD?mkOHS(k59SZ=f%$evV@=t{C}maUzrEsD!1~1u|3IR%9bF_i2mPIP z!#da4m{O+Jq~=L@CiO`U(uEW?kW8(k3kiW8s>yt8!K%_^es#gnB3T|Q!PL^klN*A2 z#nt@rLSKrW3UrEGt2P#x1Yqi4c4PCtdnNVy z#(j4gM$Mj&=PpxecfkeB;N9NBV5Z%-M4Ue`vv%^GuCa&q4bgyE&I6FEAG3L14jsgZ z-l>|6we?Ml@j*(t7b#T^ z^5tdhK*!Iuwey0`v(4FSo00tk_jcj!8k6cbY?$Y$4R?gMf(HKXT_TE=Ml+s9u4E)l z66{L?V{5stz)alL2of;u9*%Slj$|vNRK@j*hR6oPs50C1KEsikL+rOJ7WMDi?^%jt zE4z|yB$`Tl9$SYr`}d95xOW5&@;N5-0SI3mM*Dw^un{MRG>A&h*;iMH+D^9!(bPtS z)#Na%4n-mB80~GPyy6yOjUHoWafCj6LE5R%*v^G?#i-b z)b(p3TMc0n%X8UX#w)aQnoiJU+6@^kC34FNm^SpkzBkr97YvzmVV5w4bb`x>`5b-z zoVe~PQ9(%(h8wMvJSFqJH$W^(;#_V{@~w?K{cj6__J|uDMx)Qkat7R`Fh? zWkl-=WHuEz3bO%;62f6)`dZNA0rX@k zqgO#-ET45yAXm4Evrf=nZwj&_j5#=l`5mi0IOT?nu^mWpds8?#X%qP7$F+~4AVE}>!thI)3X6|pI1J)Evro#bn8TqcHJ8FWX=`kra#v~~_T>?*KGFS|4A z>YFv%aCq4NbL6q2!4mO#%UX8L^>$0o1JAl(8I2p2C2U%VQ-}S^PQb@x zd=OYqG?d>~1{M()pEjcto$$6{!}xkqKF-19bnNriDszq$?C>e)Gns$MA%23T$C(!4 zb@j@Nc3JbdvJJ8Pf30&HhuMGH4>kr9VsY0N;i2WVVCJN6e90Is+_k;r{xsclu@W>J zfHC5yk+rc;4`-Ia{j>0CXm_k*J#F$-Lj?;kzaOPp>*Q0qN{Q>^8!2szTL>9azll)pK2~)_ z$ZEP%gI`mhTq9ozTN>?>l$XtFtAhlHU8<7f&laAkjS);0?ynjV%n){{x^yyL*tV)x z$Os@@Wh_`H;#yfGxC^+5Jth(kd{)0Klm^sqs1RraMq;lCr~n-rmxZ)JcW{{k8DL=J znUmiE12udnw}mg)8t}yd1uHH2oJ9=F=zLDVdsVJ{qayz@bUBJnauog!t5FMSAd@xi zxUf1?=YmXH9<$nG-s65vV?%Zu_h~QPD;xDm?kL%&XOnN7En4l#1Be#<5j_W;jDJD2 zLml}v$=jHQ?p3O}^XmccsSamNLIGREQG7ITHs8*dys~t`9!rl~z2SIyN@eR3CVy&a zJIMC|jc3!#jlq)Mf9`9+ir-sxWiUK;ASg-Z_Rc=y+|1~;&(4Ok_`|atv!_aygli z7=~>RI5@-wvHBi5ri5>eK6N#Wg-;;7zD9i+m-Q5lEt-_`#3dw-2l$5-c#`?TL1{bV zrvori+`S*X?*??>7u{05__O^i_}%Kv_tXc&be%)hCz1-H#Ek@W{rRkqKlTv0a#G19 z8QQR574Ofg9yU7+t?hVYy;2ZHLiojpA2jJ(*oUz!^zV=fZ$vAXvCXS)^TL<*}&Tog|)@PI+^v_mxEU_(;Pj}Ir)~M$er*S)oSwXW``=aD>AUx?FF%?ueK5Q~I3sYcbg!DF zf6w;jzm}erulVjrr3r8QB@c4)`nfrHE7#j&Xd@Zk#1l8e^)BQow&#NUjC3mU6%s2A zZkMo2#4cSt@>3H{v#Xz1u}r0^GpcP(-__r*C778uVd_iF?=~{39j*j7>J<8z#5W{n z#9d%FT~4k)uhRTF_2$K{4w1xDMl$$4w?REw+#Tn5ZHvB%2mymWx@Aj>IeAgFgJk(} z6RKIkhyIY3pk#F5bmR*MM{j=a{I zO1zEv*7=gAf?DZmq1{Go4IF0-A#6qtXN4VEqc`R|984(pmd6~N=pVSki;U@DHC>bNSzzw(wP0Q`-tTZA^_k{7kDYGJ9^d=y5IKiA(8hSoDju+1 zp3jLL${^NA?9KZq$yTN1=N>h=sEF9J=5b`cAb?@vF+i9YFoyelI27p9-{fuu3E}Hk zx1S1a8E$mON9c{ZIQM3%QsVD_=mPhDBoftbdn8GREW15X*dxssJ;*#by;%Hk z>rNYiy3ZITXEf93$mHNVwIs7nt-ByMfrlD(|LZt;Q52&fs<{UC3tELaX(2}`&Bd28 zeqUfzaAvh$cv~@?QEQZ3nVy6>S617XGI>54i%;`4nr$eK0vdj+{q0+)pIu+)sieE! zEbj4Dm)JD#5_9H3!+#gOPx(|uX$Pr(?tg4otg*`0h?&<9o?nVFIa|Sg=KAN16!DR* zlt$>0l0gqvPDa5Lpo^47xIHwB>ZR-pubf>_{sbGqABVTA7!Av5U4xI#NnWVaail!Z z2!z*9Y%5gA-XR=F6p7b%O@htAuW%{AF%Ss5377+hHqwNwh1VM$gtmp%aiV~IU@nd# zbOq4V5GL3pQjZ-1d5V!}#RKj`Zfn3QqxNq}3D#9h_pIWGm9yKw4 z+PuX299WFI&kzc~((FBz7ogh=q@VM&!rh_pq1^BkatX>8|C^kFRBR=X=;*%o4Dx#y zSa&P!DS|oJ%CJQw4jk1S0yc7D*4QCyVq)IKQIo8)$a46Pw!GouI7+{~_11lr@^f>` zGoO~W1xCiQjQ3G4*H~HmQZ60LkX;#+AuD=^YJZ)byGOPAJ)d)!`OI*dJpwx4uRab2s^0-5b``gpQ)YY2C=7?1(ATkk17V*#c3ZLT>i8*r$0qjI;zs zw(1mT+`Amy)J8G1VtvtR0Ft#gR$Ly5ggXsuds(drOACsmvovoj>)OSFP{NEeA5Nrm z=W9Gaa-(nFTzyNr<~R)`han(WMW0ZYF`o&YIbL-sIk3+V*KT>WM-fUlRF0${ld8S;S z|U)PCfag=ZVaRx^-e;=y3{k}o8^n$56kah zue$9*`Y&W2Ol2W0qm%lpZAFdJR4$30hk-auIdmi#V^@ov}as7mx&)f2B%Loetm)r>mj>f|;ES?!(r*l@>6K`Wr~ z^cB<7i*+ybJXG#ATs!Rxdpja%_(H9PIbgM^G04g{8&rQWX{n|N`_>mFqo_=~8miF` zvm%-*S3${?K%r7l~X37}b^w6NP`)W(Z3F{#NG+c>#QyJ_D!0FB*dd+rcLqzYE8M_M6TDu0lrf zcLlK!&!cO%VK5p81aLr1u{=T{kkr~IeCa?`MZ!r2fSvZ?IEiPYtRwmGba(?{Y|$#Z z@fdy2!=ZVVaX0jFi~bb9Zzuj4?WWt;RwL>H+P57_y@-0=euu(=-tGjE_R(tHzo^GC zBfV|3NM!WYB4(wt>d+@jKWN`n^^HG1pVQEAE*?ojimd3kV|G|M%Z^S#nR-iu69)DP;FF%%F$I;Y8Hrs0a!Z z&6r%k_?4cdUkVMc`9^0)zo_A3SjDwft+VRmDypq#4^y*?Pq3pBn8mH^=!D|3t=ZnJ z*OjHSU1jz4+KaFIzPF#*ET6jF`e@si)P&STL>u_}iJ8~KgQEXg5Vc>~?aSASelou% zIxVE2tAG467ukO!?uTA%ie_)5-TNp|-xF(*^xg@77su>MQkwf>`T{8d^E;E9oQ--` z)v!<*64+L^wwYl+_-*%Ia{)Wx-aKn%O8O3d`UcJPCV9wvLU%8#Sccqjqa(|rl-xby znT0ZrC918~*DvJ;WoNVw%6MTg!d^)lm*V&)db!yNShw?>n&~~OS0fzN zhqGE;#eI&_TB}9#cH!EoCC2tHS~lf${#|max0X-2PHkM#7{V{=nnOqY=g4k zL$ood3VeR%f$AFEf9``CMTIi=8MX*NzZ4E#fT=U@sJ&CMZNDL@EZ$G~PYI$VG0`XU zMLuoxn~b~Mzfn~QLn+UZDA5-27sK0P_7c~wwuoI2ALxE0as{~1a#2`Am|brwP$m@7 zpeQ^i+|+nXC_%&lOBXsWB;R--@Lp)L$ym4>xZN28Gy(0kr3fy81zOJneuG~$hY5cJ zTQ|KI{0J&((h=+c+ct&?p#k`s-~8Mn5;Y(Av;g(h2fW)Lt!(ZSZ}}Rk;?m7eFJe7M zzFWL$_)0-yL~!V7u^=i=o38779S@~syM#C2AcIlITFppX7{1m}(nF+Jr!+Ynxz?9U zJB276a%8+fsuP|vot)ngZnOS4$BgOBLhMsXCd*v5Aku@?2?q)4)FuESMa$UMbmgO- z+A?)}Gc~#$iwR-h-%mtMvJdu9&i*Xa&Z6TRmdEaW$IyA*Yc%Jm`P>5=Y7V`2D$Ci`R?6bUzPzdHp75C-$zRWHeN3CGffj#HraqRH| zq*)SzXzG$u7)tB$J6!~z4g0KCo?@N~F0J-tybmwMYRsg@pzB%}NU2GU&lWG_kg*pQ zOiHaAwHCu#y4s{RdkHxsW%q^{DHRfZafMOteV*I~2IU;&1}}@Kr4ncBdRy|DQdtv& zPbdEzZ@WCI&Mibp48ccR{faN`ZMU~f92psO){GIkdegZzdyH!1*_(tJ-9+wZ=8`i| z7b{F=H2pSPV%Nme&rK*?@9h1^6u!I7jF{5BlR`&L8{Fk4_mI^No?*v_zHM(Ma!;bJ zRpj;t(h@$Mf1K#rOgbl9jOv!exJ7!_gxdKQo?A2ydY8DF{ZBG|c{(H3uw4>Hjs!YMRGhan{*43-bz0#k|u%E9Yf@ zxL~Em$i02eU3DzG)-XhMpnUG)s(Ne@QLj%mqhLcl2fCk6fXON^7Az}lDV<8G7Uz-e zFJ6#2E#EM#cuQ)=MfO@H zLlkJ_UD*VM^6@=sf2sD-Y3VBxts_ek91?z4C&lF?UtdiYbr!4ZJqdgaHo)l#@cjkQ7IR#sUpbbEwB7kCRB`6cD+-nUe78B~f36_;O-l7e#2NUtwBY%xs zbEnWN(Cq{vQBnQ!sxp@KvKBZxm3o8Y_?>qFwhqM^O7hvb zbH7G5wH#g6+&SGHcmXd-TX7$6aiTnM0pJ6VcE9)*Tharx+|h~k5puun90~8-(j!I< za$X`FV;Uf9#`f76h}WZHGyP626B=_)b}z|qmqTrVbg`pq1x{Vv*hLLZ0k^`v_h`R1 z9o@2-3)`zG!|G(fOteT6H}1l-)Jl&>b=McML7rIzikORPULlo*?yhWM zmbgjuM6bV1wH(vi7pt>p4Bd^SE;IY?e3;xH{jj%yHJxz3=8^N0c=|eT#WLx};cP>G z0ig4tE6y8T1UQq|#lJogU0s|sRugd;k>CE(zCIS6dDD;(^E|Rl`yR>_1_taWHyV9W zeWLFd+17>pDO2CmNrC8-Nr29(M${Wm|Dnz*AT((*zylY`g z^#t5%rA+k(46?#jdjvbboTxejv)L$CD}qh1>eMQsa}8l&1#lYkom{-U#gvzljiUAx zOzDH-f8=WlSL6(deljakxx}L|dFhwqKgBd8-%n_XZAfH}c!9jdUiSiozk*)ll=z2* z>zecUe+b>cg$d;fm*Q&p!2oR6LqNZ%=+GzdC&}wWAaJdeTURF#Aqv6$5-I^2U=;;o zffn`0`8NRHYwrqn0)96h6Zj7LRc9|)3;fb(EwBNx#61Du7mKMOW|8#;8e1nxR-U!@ zCqFw@V+(2Ko}ZiE(w@54;N~fxFdMjEL?7gRd@w~FE!}#7h$c>P9v`k z3$q*$O@zrAN$0;~{PVY*{t|N++Z^UdcURPHqUh|64yV}Z58Hj77pL~NfBC$h*4V1_ z%w#F=;81Ax?A|8wE2Dh(xSbW_$*z{8A1h&J#*sYRy5Hv%KWl#NH!A!nHDUxUPrZHU zJS%GCr_<+*)c$IFnOx<;OAb+mu%TZlrQ)UGZ*Iq{!Y0eSb1J3D@T0D7Io&&Q zrv^Kvl<+>UyHzJh-@H<#S8nA@yG#mqVZzr|n#nTZ?JbGq>E4L-*1VTh%T$jz-;^fo zBex8DTZ1`8@}=WCD&n)zLv2mgr&DM{caguEvzHO^%J|UL*MTxsUuSi^`m0OX6&|X% zbBiv4ac$hofPmgU%VkJZGDGcVZ~qMv^SUE;VC?P=f1!E1)WY8&*4Waaei39Q`0;(qhPqLKj7*m9AD^?ikMu`F*^SmFv0+wiL^Ji6l)f!5Vrtq%G1{fD zbn2$7LynsP%KZGQ}I;>5&FEB+l8RCHCc9QY^QrtshRJ^7nZBf2e|1ofn1p<~d^X?}PPe3rea0)~ao z;@~duf3sgyc;U~NeAKGoz`1!XPnF75A5}cOnW?OGUWHb!BRU60GE3!cB@SeHjKn1mL&C{J5;>l&soluGkOx))6mJHOc(82%$QWVO*cU z0N_Wny}(zXGVYwvBFLoKS7-=qgR2sG1J-Y(@k@a5wFzKd&|@rr>3svy#?47_>qIO+ z>8e1xVv8Gdx|W^;OgO&6LNca zZbllVOL#J?gOZ!bSn#o{rGzZU*gmD|uZi0=P1$Y;B3Bq5+evPP)3}`{Ze5Jh9e(tG ztcyD%&YNt%T?Ho^vwJt)af;Qk%j?X+=Gsee;+so5;Bm5>tGt$nu3b6LL{QpT{yrTg8FO9Vj?Te@xM`Gt>1rnF+IpKiNPqUf~ zMmfiA4QV)CNqpNI?VypI)4pYUGn3Nw05MxRO-OXZ)NxKY`w+1_6jA`XPK7)Zpi;x2 zvtlywV~g@RmG%7NI@wISkGiEAkCi(9H|sn+61Jglv8dTcE`6dA)BwIteJE9qr^3(9WTo1TsLNO;%HZNr<|H`ML8S=vlxyS{IAT#Sy6 z={m7u9jiCexXVm~&d%IBlK(NGcey*z^nvS#Jtcj(ty?8G+r8HQ786oBTI}qjvswqL z9Z+r73x**-o7xs^;%Djw*}?G%RXa-rPxo%xb#^c~#Ko^%o6{%pN}60u0x`Z{MnYNcV?4SNP+Df|3y+|(nubUBL8;*K?QVeAC>rUhR4h)K_g`-Qxg zca%9DY$#_WCm2nT){u0ID3D}H_XVy4+(f_lKj1Tf0IH|Nx8=^@H6_&)&b5D*%2TK& zbSP{qmyh|%YboYXwUxoj67)aNT4gVml`8S*9BK-?2EWX_1$Tf~%uB0|s1W8d;V)JE zmw+nWDvK-Ka2QN^<$=19iq4Ls+H=){=?ka&RP2fZK#4#$`;MHGY&VG{^-*G-@J>Pw zvPBP(0m{iv=_>fizh!`A_2jjvJdz7iA1AJe=}47P*2SO84iQU5^JNl;mPLyt?{;c| zc_Fms?;@7qzinTEGZ68fD zCJY1DG?)u1f@CWL&vm{>m70v9Ts53_MxG}O%?P2y zMqkf8LD~>S7tT8r)5KTK+kc#*Y-%`RrcJkeT(}sqJKnBO=!9(t%-d<6Egbq2^X>LG zByuKs_l6UY9lQO&(S!YLw-2wk&B+fCsQr`=yx^$#67dR=}e zhUQmR`TrY%%WAq;B!BxQckbA@r4A62Q6XtML>-rabOKq<4U;iWy5;gY;{s_ELy5_s zc!%kTO&Pt6(M>5BHOFAnAB<|cZ50|2FL~5gR8Ho2{cFshD)f)T>oK!~I6J)O%Hqm; z16EBk(+3|P1e6<%fNyfQ9Se{OD7V&8{PDlJXFRN9Ba)B|%lmrvXWk!tiW$CCa!l3j zZ~4mngxhda?Y3snRe_l??b#7Cc zzn8(?y0gHOWOOxjeWm!>1b8>F(2Uvm@XUC6tr9^uQ`h}Q0G8>w^+XrPmU026wHv*{gl*!-T`4*9 z+fNTGxcn^2w6S_sFzI<+=1O*|UoCSbJ*&Eoyi$>pQd_fpBVM)q`ustpQ{}{LNeH&^ z7R}LBC%B;8>cTs{LQpfGog(3Az_?&5T+$rRwV)h%9CDZ2xsM;0L|O^n6g=?k0vrIx z0xybV#mHfH68d77-7oVKg!f!7@o)=QXZ-{%Nzc`7N#rTaG@FV?DzFCc$hgV34)e-u zE0&J#!OklkP^?wTprMpTM_&)P@d&eSs@a-BfCT$*>imdvNiY4#k)7umyYN zQTWD!opKM%Z}}7amWuz*iu!<>`_#Y@r~6BO2G9y5Ld%inmbx~Ik!q3h?LZ-6>|c3hYOW+w&VV>BY9RfEOpxxD*CxM`5>ybK7?kFfMR(hQO~sNr zwt-TjZtcGT4?qD|Q^D6H%_uE0a!QQx0kM~I&%0EGU5`9;YJy+DCz~oo&O+`reglj^ z1{z8P`@!V;GeU`AwXz|B25?Q`EQhn8b%Bn$vFL6CroQRI-@3;W(zX|xv!<7W$D607 zmV(QVsH`B5C(Zek%NTMqomA<9X!}QTcIWEgr1-k&_k>gCQK^H&^mC{t!XIWeDthAn zycTkre7I!c;7q%<8tbS#ZL_ z7wnlj_p%CiZJo}tig!IxcC5}_J0yVpd|%%={V0_bgw`D{*a3Q6Off37xY(?ldko64 zaB81li+k7s?_aH(7W&(o31|0YMYKVmjL)qb{d=)G0E=d=cj9m%yDSyh)j62q| zxjvGtpQDiz;lPvlF53Q_an63$ke`OM*pZ_uS~c$|N0h^I+We37ec#}CUR`2{ROq~x zL8Ok~5A|P3UjqTBJ4#PwYw3K&wsc`Hs}vU!E?J1@u*tg)=;B+98yMHh@3Y^0b8B-K z<3grzE~}BTnt1(nVA>I{WfNKgY_8k9&|HWEufM|THB_$hXO-2zUbRSAEW^&)gkLGS zH+wwbp(icQMz=>({Djf5aYb$pK@JXB*)d*@F)bI4VGir_NgNHwoUZgA+veqS?mk{G zFpn{&l5CJmoBSpnE*DPnmHDj*A59nMl4&ELGpE9HwH#krUo)@6=xSqHS@*d3wMZ3c`> zfp2iDWF9vp{xa3eMZ7hatd7=d`$@j#>e2p(V(QY-mq!`H5C>5-Ix1uI7|R>gPfT0j zLu*st9w`jL^rf{C`|#Hu{%`M96Mt# z1^I;)vZslJvPO4`Q9R7z-5I0=gLn5G%9{9e-34>dq|UOzX#3fE4QNK5F8<%Tc79tw zQGCmb-C|_>Cpme16vJBtrNjLMi#(?KL++RSopK91UT8s!4ByNXqJ0XbS+9WAfEH!Oz9mTaBoaf9rQ(RWY~1p*(+rEH}qRMr*~C-v((MDsB|*h z%g-wznMvkETpKYYFXOjg+0I#0$_B|6Awdpvt`>~ zxp~D5me8z4(!^VO9Vs>WB%#plGBl+<=wShwc-uQIW3}f6k`%388Dpka`f%j0D>++y z;=u7n2WWjfqhpw`bCB2HhMV$>zfiK#qK(o`j%he)YF-;V6B!sa@QvyfuUW^$y|Q|j z^dh-iry&IuPt#fNH=JDYuuU3DIBl$hiM7muPWmlk5;TirKPSF7j4CuQ7B=;(P^bvH z@}xoxXKN-_ezPb2N?zvuzBcQJ8PVfo4$m{+5JwQ7^Y!UY7_m}2c7W%ts_P5Qp+Zd~ zt4?u|ZHF7-g_=EDyG<=QeHwdd!)-mZoti?;ha?lYw+-- zVBeTF!!EVs9C!{P#j70i9N|!F?%-oV>fxOEoF~o%@ObBbMR>2O)SG#QKl995I}Hu%k8gM^Y8YRp6SxYVmYh{U4U z``%75V+f2OBxwfD9IKKr6(dpvBn6IE%*#?M(t*@x(&BPE~NSb_b2tyZk&P}kP(X)d4n zmSXa#i#L9d1VyWKcv9>zo1KT$<1V!w(iCf#gT7MgDrW3z$y5VcY$S^rjff($7h(`l zTG2{_Ghy0et-&76=-aYzrcOWDLZcU{_>CQ8F0FUV5Y3*(Z~3{LVgBB^h|FQ0+##bv zn4n!GVv8ZUO>yd{Rc@&vVI=!aL-gMP+xZ3L)qLOX|LoT6e``lc15f=wzrgmptBlI^ zaG8FnV^8*Z^0t3ZNgMT82%>P3;u?5Zd}1m+^ly$d`I5hDg45`P=jBM=kqFnoxRVpl z+@B^5Pd2+LBq>jLx&BUEo|tq?PkcrwLG#6%8SXV1{*2x~gQorEq!f#d%NmdB|nHpj!D26rP=)338~=Wo#sxXKv#Y1J1jdqY8Bv6=rzB z$E>v&VuF0;;pR>!{YjEv1D&|}cV{1(PBSI_)ZdLiatu>mvPv$!U8K_;TC@%-|w zCZ(JCHnnhEb(GccoPmn5+3bjdn&0bP5sXM? zL5S%exoFPwNBP6t95o#KikjTVIA`H#jt3mE+7JHs*VR7HahAhO4|GJS=+rCai#i`I1upm^-`=E=+i#l&-uscuWzeX%X_CYB}89sSkDMTrs>;Uyp z7NeblRYTPoC8`c^rI{BhCaODJ zKJ?Fuk4muWi37Y*x$zZNk~Z zmA6iO)8{v|98XNoY@a}4=(w#|S2U$?Q@~A$Ub}VQSDwwktK&Vwn%e`pkfvRB9MG64 z?QLrWlO}w`W|bpLZdxGhMvPa)k*kf>p#1;(zp)kJ2E)VmMFI87LM8Yk|M9XvY|SR{b^kAxXgt9Mm|=^+zurZr@bUR<@BJ1YbM6>%!mxv8T;TWw zf+M4!M)nOW_{HuIYDu|Fo_4FxilE(gKgiyiQu2_@KA8UKrJuDn1@Me2;AF;o@|3#F zns{>-Jz$^qY|rDJKIIx(*fmXZ%P0(Hyzr1JR$^4S$Cut_dHd`&q%Dj@KJWRlnN$|p zn7tyBUNZpR^TcYM>OTciG1Nf6i3pmCErskZM0%X7Q^AK-FsQrUu0)imNs~SBg7B%vPvF-=cN#y7JQta0qXXL@ zUR@!epWvk~Z@>*;+Avz|BqVnvRWus%-_Uo7x01)N@`)Bm;QL2_YmnHkpMZZ5@fHCf zMl7KIJ0KE*#?=T{LmoHxgSJH_>vI7jkQX&DL0iDPiY5MJKt%5A6LZ3(%tHPE5$?qM z$KiZkDOTJO0=fQ74)C$Ke3`Ics!T^tM zdl97&so(LG(u^GK_)alHu65{9;t}!#(oLIhMix`*UuGfUKkH>H1-KNC(<|G;qNFhg}O*`&7UWg_P8n_Ndy&XtEJV_WILb_Z} zeL42teK|FKxD|s)8X}-wI#Z0sIb9wmn2+hWI>m(ydtln)BZpqP97G=y%3Xz`90-CK zqqygzd!FdXi-c;|8{u4|E3S{?3FKa%nCNZNhF4U~3}x6iGr^ML>;KIEiBC@e z&5-N&o;rpaQUUt5H^Pl(Y_kj?#sa};Ov zRwkOh=~i0AKX=Kew&2waug9l+5eBcjX$gX@?{li8Xr{pbcOh^_F0dzs_!UbKI!;HN)|QQSEE8)K49gTmN+>)p;z>7w^_bEh-i0l+kD9BcyW22CuuF z(0B?g=3O}=4j(qfAuuj=*9AL_SH&21+k zmYwA{nXNIkVAgAraQ{o(UvUdC;V7B#95}PV1Y99R!FGV(h*&lffbAf^mPpW|s0Hpl zP!*z&s}ha}WcQeY0H8ZpwZ-^E%dVD+ofnfG5QTI>{`D7u(;>L-Z=x7cleRWN1JGQD znaFujDZG|23Pi&n2>k{TTE>J~5MWcPa653j;(+g^2&~AKw@-LI=MFEgkXT9{_cA|U ztj)2M6Ip&Qj~GMKWe&+0O)jih>#GY*trJt-UMW2>?3}QBZ8ymqXp>f7(l6w{)(r{~ zVbE?ye(xOLc8hF>(Cgx&)*>bcRHz@3(u91L8`5(UJa*)lg&HN)(Y{+>}SdP-^c{A z3<9f?eWr5)uB0t84+45}U$gkbZWo5JlM@ch4QG5)Gb+!|eMtx}b!2^sc$RT*KB7YzDc!WS2%rKYeURCeX6l>7K?#NU6~HDzTbPqts}yB#vu;>63`Y&H0Waf>pG4WWIh%;aH27bW~*$`%C0&tlYxI_|#sbZ9pMn zIDbzX-#W~-@7DixJmIj0c&amg3*6n0y|rptGzOzlRbiqqSBkyzZ)MUnL**p2ig_BY3tOBn zQmKX=%+j=_)U1};&y1)ytY>RJQtMyi*LtRQdF_!#l)CReK*v~HeD9b|hgshGt(FT_ zYa5VOBQ3qax(0hhNZ$P&CzKX?(d-wK37DZ#*C=gz7b;m;x0le3`AmR`5YNm>; zLgsNek!Z+kT$tcvkbk|gkQwN2En7$n^rxJQR{@}z^Y^GuEmME+aPhe&-}*n2&N3{q z?|b`LV|VwM*xlW&Ahy_IqJoHm-QC>?Vz(kJhi^~Cr@I}}gc!C-QkGXfXX8sp}owu#2rR$?>t2eBk zW2CzU!Qxr4$%3HWjNhZ&oKDb`v3n?Y{+yIbCogX`FZb#vD+ul}i=DPCGS&p6JA zm_CRP5BQzIX8zH`DmFsxWx(&kJahh#i83?mqKJT|S;yc=1|kdSTWsCn6Sw*p=g}6> zO8n+z3dADy-+U|dJlA8z3U*PPvi3RZafQj+YTV~?fpt&p*9Q6R*jl%yTicvOnhkt{IUa7r`xa&YNneW7lI{^aR0lmOo$b^oYpT5Zcpt$Vk213l9e zvI$6V?>Rd9S4}gReCk9jADTK%BUTXojPmigXS*n3XT=QgrXu5$`9X{ zCXVu6+{z-`|9f^4j5M2o3)xA)7GPNRJpfL{BC`(=2mH#37rHHs#=nrtllojuFZ7=n zsOFPUp?G3bv@rhar;cRNJCa-jNs=Sd5tDAx1G0ltyHb&|x@2l;5gFDwqI?IiY#uLX zaYj^9H*LO32oi#D$g$IYg6URyQ?;u0T`2Z^(~%%l$W zn;g{~8r8p8R5_59PuaJ*)H-hQ?s4OKb$C;FzY}Y?#dv<<@H`3JV)!!7aL(1XU!1nw z-pwBDtvpqYTWqe}VGS>tzH`!6y0J-eLCSYon7L$&2d}(lMQ65Np=An1Kci!!r$Xn@ z-DZ}!%&Lqu!O&>YNk*>P$CZ-CLA6%x@61h1(HUjp4tWb_IgfVbA2)>wczimH#W5-0{J?TuqF?dnEJW(+__;UZs&uG z#Vl!WAF?{*exT~PM`pg};`3lq_8OJ%*>vH)m*39p^ZjAZ#Oam25ZA|K&TA$R^n}i4 zrR&E&?j=vqNd4E*0T-%tg&GH&A24kXa}9o*1?C0T3w=&%G}SeCLCBfLyZ|!!v60O<_flv@K9l>6)aqrt7x!a(e3GdyFl1{o_c;1R1?Reh#Ju{(^Nofnd7-k$kTd zvizZqBT}XOr8kr31Nebvte-{BQ!@jYT3LcMIWn-N3*;NqNqpi)j*A+I^i+>}Hl*x) z5BY5T7Pt$WNKx=g$j)6l2<|HuS}B0vFNLlOBPS~h)`9s2#3%c*Bbe!#n=dwdmJjbo zo))kCcc130{8FRpdmgtw{$TmK;yU;t&lzs{#c;A^zBDDd|m&#N!q>U z>P<;3wmbN+sx)92a4ON!-JN0vSEw&WHe>j zSMB5|z}QU#g=?~c+vZBNz|Gxc^&+|J`zESq^5D}dBT*fd6A6d=mR}EMS{_$I_d>6I zUUNO#x%c;MaUJ~N{dHjJbAeynA*0Q?+Fds`h4Nv*y>Y%mqxQbf}pu9s0_uu^(d;JrA@luw1h{%Dw7?Wq&-O zDaW2Bxv`zv@c~+=S;^@qa;r7kLoO+(W5b&qpMmdnzlT~SBzRb$kvLW_B}8v~Jd`Ri z1V0$C6Yr1X57I(DZfg&siOFuC2%3)5C1?k&#ysds3FVKc?>r2xjZN;kh|qyE^*xH{ zL4=GP!CxlOk26ISq9iBP!r`&OV_gA(F|ng>eC{HLDY*gciJY@~LHwvsGo+A+gm)BD zFcHH$JsmEU{%JNo#yX#NVJz!Ix6Sd58UMAH_aC2E?c9Cja658`@v+ox@CwU4g$u?J zLGC_YlTs^EA6(n5UXqy#_lQ!slA!Q(~H;$Kc1Dek@Di|o-UYb*6mNQyzmM6(M zEbhr(lclV)DcZ|buDwuNl=-=pb;$tT*wsyWmMn z{PMNtljmFfM>~%+uHRq#eJ|)ptmGH(M;@PN>eDm2*+**lYlDM$BuuzOI%{?a*3lx;A^irSQRI#-Fwl|_`e%CpHk+P29Z$NRL+jB|wh zYRduFCiiG<44W(ED}P#T7l&xIlI@p9ovpchw|8*UX$ZromhGAjw&W z-2qqD*|+-!zIK$ydz#Rvq_Ev3Z|m{>9kaxFGWCu;o}QAr6Y9M~cG~s;w~Ur=T)6EL zkLN+)&(%tUOwJ`)*^MVwVzD_}b zhp65f6DzyKz-k|x{KVb5Pp)f88f|(WUobE6dY&hV&Rs|kXu?B$p@$vvQYh`OiEhAG zho&USx5fDnVujm&1?I+wHO2<0$Je#52JK$H;kF0y#U*xWgy^BpyVk;Fka0Z_7+oB` zcROMb`EDdNMlFdl@hxT?F-dBOI6z*X5DE2&FC)DU3PIkU`su%q2%nnwD~|p)ehc~{ zp=lZd8^Tsjzm4k4NSytG1r@(u4sBrRt2z#x6I+KoK%89P;d|6{D{E)=vB{mG&5Z}% zx6O9Y&$u7eHHyt_5*I)%v6-5}AzFofcJ$$}DmoB9T&uAV~dcYsMhQd9&wh zR1X*r8FpBouwJj;_IvdFJb3-}!}^ot<$?PNhk0|5TmGBAW6dWSQ^HLN8x=Kx$~Q|v zsMvb{mEHtiobl#GVnToGL2|KsSH`vY5=@KGCTDVTJ!*X~rKujbPLr}&@Rjm7bf(B^ zx+377^$S%aJ{74i|I4K6wzL$g5;ZD-D!@7w%BLytqC!QCMtn5q4c{*jzv6wt3h|Q4 zQ9*lg={jkF8{*y#!@`dxl!zkY{SxVe%u)?fY7+?gE}7niM~c1juUG1nT;<1BgD)%L z{*`fHkIa{~NVz=OrY$3-OrXrx55-2{>z&WajB=evTpE)~DJKV!{+@07b}F)jY?$U7;%@8vDALP^Z#3i2;&f>+=Y7YKh8q>U!n=ce z%s0s2*5$`mO=GLp*=HcS{ zS6|6}i(8>wi;aN`ocx}uih(uo#pO=SvI@AoC3(&tsGeM*#5~~K=9Y-PDrzJ!6nZRM zBuMAm%d5!RB)@$58Ll|1P!ma?W>wrNpvz#d%Zv@kyT5pT-1X-OVrkUv%E<5eM5k+{hihWaJTo#|80TMe zqPt}9wb`_5c^(TCvAu?XX_Dc!m7p$?{LX!ZE-7$_EhCe3b2G?2Xsl!PIT+s0vvlAV z+*m@Ya{gMfKxDPsO&2JOF!PDw@cN@62)QS0EnuX%czMlUw%@N>aWBBS;u`g+B3~3n znUN6W@k)pa0vu0BFJhxv(;th;?#K$co4|+Pg2l!)w95oG$CS3e33Q1C;Fdz(#&&g@h0Mh> z^{&CH6R<;;(YG;>u`PIEVmwJa$^w-)mKn?$51deiK1rmTfdt6J{x@milNrrEIsu(Z z2qd4vSTauL$CK16ir2`E2CV_t&IT8Tz0Qml7?<4d!w%NgS08bluBL&nt_!lMfz{IM+%`tN&UqKFUH@_ zw%lx5W?mk>_ij6J(e1AB_RcKV?c$9;WSI-`#W%fx{f^T(^HwEuuCH=PYE=M0SAo`v`Y}X~(SY$ZpISIi+%F3wU?Ymiq3|1uvlmFKF$;4|Q@r7xEFBxPIm5*|Sy--zq`SAl2HEM;c=e9bHsxGG&QD*M=eFCMu(`aAr zSZ!(IaOGj|b??)+w_oq!Hf-k|ap%q71;e;HM*2ir_^|{Lej_fPjs-yw`+SEKuM<}a zp2%0u2OD-2Il20$S6e_(WUXw7^$j~)PBMc4(_G9JwGExM6Y=uD${2gV$jbPjWR7uz z-8h$z_KeLE^9%rByAlz30y5Go5g|o`LwF>%Ob&#%2v+Nd5k~t)m*fJaEUylDwf`OF? zlap^;$X&6NHBfs`GDXE1-+wp@1^EtD&OZac897^Eb48CnUEp&PnY_6!?o=@Ke$&ty zH+8Y`)#V-K_s$#0J(9_Gub1Rl(iVfa;>78;tq=Y9=@tq+I@-DN%Jts}=aLdAlBhV% z=(<(&dZ5dGAz!N*Z@!WEIs2#4<0v$UPk95lWJ>Dd9;FNqbG1<5s&u3`2HXW~7%v*dv>{9LB6%PN7 z{YnsuypvSiVj9Gll-B$*peJFk?I0*CzO5r8*gl@Um7eS#s|iQfIKk(^04M;W4TC9scN5B-f48Zz+bK+q3Ic)mb%Oh`i?#?_L9{V-@l zvO8=CyG3q~sVw@rQd5R0`B7d}LPY+6|Lh_z~`+2BFN;On<&la!l*8&jz6CV};>gu|-Lg*tdyvFtn- ztgBRe65uan6fG^qmJdt^L;~29E2+<@pABYV}J!%h^0?BCNW2D4onui;td}XyqZe6kh?PrUC20)tCKgxWHE$e)$Daw3n ze^iB)2y4!l?n&FLvI>Vl{auJkh1}{syGoTJ%TbCpr%Lkq3nP?{@repbF{p2UjWSJ8 z-v4!cwAg<%d$F)la(@3>&DhxHgW|97>rKu4SWer)d0}=#VeC5~VBsOL6 z?sHdmJieTTXzz~`UJ`Tf4i=aYF|Hb7YvD2}?qx7%3W^V>VWs^FQKh;;t!XfLxn}{0 zL-zOVbS1&^d!oJh9^Qh=1DFm-yYe3y{GCo=CfyB>JV7|<4lH=|m zSA6GWo=Yw99eKfJp}UJ>?(}(}Wab>yKcY5|c6A?$jiCUBdDUcF;VE75KO17q{i5Dgrj z1c5}?r1uhRqx0lyab|d|REo5bb}XaqOQjl*Ox`J8Go7u=pI+smt*|7d1^X3-(HxAa z%D-c}7Wbj}#Nq>*P+#W)PK?CaL30zYcT_LkuAZI{tlyzU34`cMRzT1#nu?`dVUJVJgsfq#7+Q_tusZ$?x}pv!l)%q?|f2t)kzoIL||!g#&~f(3sok41+SZwO~lYdJSN zr*G>Kw+@$o`!{|`{+PC5-VVOel4tA-oXn{==$|lB!7kO-G&8O_m+KQ4*VVV2Gg+@3 zn50JH_MIjqEFy9}1c95-ztWo`ai$-stJoy0=V^|ZvCxNCJp@b<|BU}C=!4#0s^@$( ze$v!Zt0?pWJOI2#dO}G0%+iti+lD4pqRoCLCT&JT>sAz;7Wto>YiHH$h3_T-LkR}I z>SdYsb?NWgq$oO#^kh;Xjxxh;^CK?LM#s3~^$54-LA%v8*Q8-HDzKmDZVx zcFXE9Q;10^`eY>#PhIoIK@r1=)Aq_q>F9bD$b!`&JPx{R_?9Hix>hV)8f`PDvG+a{%nZrgS4 z9wI(CnkOL%;|D*PiRPF2AiG20f})FewhGYh^TJiqh%*V+)Hm?R(;|2p1XXace_X3>AChk?)3Oyu>k` z;~zuHQP$ zIhy+!=UtIFTOIzqUUCr>saDOnun_*WW_y`GvY`CWl1unuxzU1S*i`BIyg<~gVuO{} zQLoaUbld<7s!%b_(rAeT|Ceiw3uwb=UZ8$+I&=FV9N2F124McM)(TW)oO99%8dcol zdn-KB8YvuLBuJlw_QwJEvFW0%Ye_uPE*)q;G{QtICJ2 zIjL03>8uti=PPJ#j$d-L${b6Y@)yRkEv zC!I^GBZu3JbFt+v_h+u_O%d#@?5m|3td49TEQvOqZaQF?(Up#rIpf~0Se~hAZzNwE z8YTaY`=@37WuT&SyT(7p*%^O3AYHuy85?S%j_|OPyD12TGU!xDd_t~y4{G%UhAPhs zU)YawAQ`WiQd8SgLA|*RpYv*!RkspNQp)w3wT*RJ)JB$V*4tSpx!mOmHPfcv!=10l zNg%miVRE(eO!w6(b*HWF)hRX?hIH}X9K2MNpjZk2tjOA6rshW=YAckdZJSWWi~8S+UZj+CTn$ge;@jdvUt<2Wcn6Xb`C8DSv`L4}K>^%}QO)oCW)ce8S3_Xhr%O zq%fl*VKu5^x>R(jvCgaP&yr#N9po;4HYDA%61%Ft>h>S@rv{6=M7pPj7KA^2UhTCv zx@cI7;72Jx*Ik1?t9)x%AEeR7Y=I2xCO)-kjf(93=I|lv@jx`VDGoGT=^+ls4z@zp z5ZEC(&vCTc7{cE%ooV7Q$T4@Ef`$2&2hS_UysC*@Vn}qUx;3|zFj$G1QA2#I=9o!_&3 z7O9iiRwL?o6NsW^yks%^0oVYvRxr9{I#IYk6C+y-JcTiZ1D8_7`AJYEQ=9v#uxTZU zFJIKZT~jz#!oB;Uw1#Z=0IOuJjOo}bX(t&3*%7ED^I)k^iKGy@CZQ6f;JUG=4pb~& zn^QIdzTA{omIvTJf?Jb}s@k_;Lcgfapy& zf%x?No2CKX>iRO(>|EIQkFw$-KOi#u(e+}Kc5wwFJ%(740xOTRF0VUjPKIsRfqN#M z*XhA3lNuX1*RoN{`ggCD{_5pbw|o8QrB3kjfYp+;JA44OxaSG&m6<+)sNgn7!<>fe zFS_5@QA&zhkv1z?RV8)i(9~z~BSwtKrzRXqC7uIJ@0q~X3IJCs(;zVg2~l+f$X82! zHd;Dy$bcH2Ues!NC+1G^u~lH~-LgTu#`t?pO5nzX?#8b^DoMf(jnEKGXKOX=Q%VZ{ zUsO!83r-*smNL^e9yXsO(lQj1kto#?6&jAb+QJd+j+$u%L5mSwjoJP*$UCjiLSDso zw*2$MMjy2L_*x?daJK_g@8yX`<}V6#aWHU`+Y=7j5P&r zqABBRFmy7*q;=Tc6d#Iu)aPUr=|{wyG#q6lvM$4a3KFH7yEIFWL}lKXiAE&ntz8dhOEQWF?z`IIf_NU)^<(2to!P%vvln1^VC8KkWK|Z;k=Vak21;*

    D;8uFU*nIdY{joBcyqr zhs3_qYQs0i$yUeAiQ%|k$<2-7h)NZr6JVH4R#9^jX-InFCMP%MEz7;Zde8a^LkrDq z$2}!7_nqX?avgJQY;f8VQ7)ta3tmR_~4gjXhOgezoS=P#X7lu{puZt9tQ&tJWd zXQUt>dLEPCxL|tAXKsV6hXAv~AofwtMJh0EBw-l|Iv8(V;Q=p`->vC6bxo?Qw>Ya# zzFHS^bs#xz^txq?aIBF$+WJ+NjUfiT{R;<>s=oV+3tkKTp7W)ig9JF)405mO$w0ZI zLUj>=X!BpOPdl?MSGI5^yR|6xN*tSBJA$AuEthKRK_hr2-GT)WL){pt3+xaWM}G6I z&{U0Sj(=?E8w1P+T1-Wx=3X-C5$imM)P2he-fn?6L>SFrWF@-jEQXO364gsG#vSUPI%O)4?RXrHN1uL zA=g{1ebF(WS_-@lVxw>aegwE-o2)x`$XSi715ZFveV5(Ka1DY6xF)7{u-Ypgr8eRf z5P=LCn)X-2q>n!cHO7KSA0i4c?IZ+jE_GzG5w@7JP5KsEeOZf!z>-tFrx?SvQm4p? zp?cZels!007C%Wa#w;OgKr|c%`_o7T%JO}f%c!gAE|)s3&I-}XP|`zeq!;9i53Sm{H4bx0f$>jpm=%~K32NY72ahW-}5YAYBIQ1b~ zzD#8DL+E_ojR_q;{`{{`nqro@XxK$I{|qT2D!*~1 zG2AAGEzVQFNZR^;IRbbNcn)xYPBVHlT?sd5-eUvB{$h9Gtj=`e&f?oHM)9r+oi}@l zEQ;H--4bageyjL9_Uvk0X}Urdin%9 z0mzilKW>~Y2YnH3T1Ld=>O@_*b}H%0OM)_0RK zHadA=WIG`HHQGHkJ>DVyLyfGE!cx($9$GLoogn~R$qX=P7+tLo#M&r zYtb&#lgJIMTjX%rlCm3p&*0DandNQFQHPkn5!Ge{MR zh=~g_)PujozBDF>UrEK7K%y;k;1+|i@#*G9aqz+9d(Ky5RP49f{7#Ax4(q?hj3L(*nABj*lbNcc=zfuzrdjV(Q_ig0 z0#&S7(nT-!zD2gP89@uhX>)UdR|~V|pTaEj6K61iw~H&63PN&% z*r6t>h6-Glvk*$kOjI_2x9%$RJ4|Y@Gv*Txe7qk!6VJ!=FT7boVTIg0=0eLA--S3N zX6u)QaT2$1eIm10ReA;`ZcC3(7|8kq8Rn{$pmNU^OBG@js8^A zu1UQDWPkAU-k2$2(9J>OOoc1m=)2{2klSO=mYJLZ6P(LWoJGgqttL4uP3o`5f?iH0 zZ`^b98)sXO@O&`Xw0zq)2>)W%46@XIciPkS5%K-ZjHg?-)byhJfB4*?e=ffpO*&H@ z)yq>_AvQdPZPlt4uDMeA=jKtV52Lva|G=f?#3cGnFWt0hjCAf?u3fei!!^d$yk>{KgWFZ;4ZXp<3K)kNhC59?`Pa()r}p~u1v ziB28(;9G+B?$hzRohmt^30=-S7*PrMo?Ja>0WHCH_J8nh#;*4rK&dcs-M2i7l0OYd zdZUuV`U3riu#R01{Phw-aBscJBD|`8Tfu^6@?rYD0iaYXt!VF@w0~OHy$&+aYX1e= zl%#6=1vXW9>w5bmik@lT4dAMf(D@ujYLqddi8yO`V>TXjw^hlCEh?lq zhlG|kOm>DG<$oLb;2V-xJwoxwDN3fC2KJWh&3XlX%)3i5ggz=_pZyg=&iP2<^6o9F zoC)+pdiYq1Tz#f~^)j`F=v<@fp$hcOyV6AeAzqoyn_~}4VE@Rcn-|EFDNHWg7GxBu zs{18oeU-JTS5)unQM>ciIw|Vz3Yn`iD-*52X`sezvf`Y);oL`gNqN+~iK4rF-$Its zn4HAg2jzRfjdcZ8F}ZI$99lqy+lK-gM#{fV?i%K*4c_z!zwd!QA1b!Pu%9KCzQ*?6 zh^W*^cerWdrQ-rPOjkuKQEzU`y90L@JY|w)XX~4}Yq?TKr9^*;c;Q_5e)Ci|OmLNQ z`c($A>9bRnc(atUNu`EeX<+fe6zJQCJcydVJa#n*_{by7Jm#9fe2uBdG!yWdW;_Pw zHYi2TnX36>jtz@9*pq09B$^yZzRR>isA&?gdRYlZT9~KB2j*WAd6MI`M&Noz16Kos zZi-m&nmXn&WH8C90vWuim{NNR%Qb?kMR1XpuC?!oEas00*QR@XAYE3o_kxtWwvR&nbKm!`}ZWb#B4KhV%X4!*RW(dGOn@^TnGk0u!vuc;_&Z%&N7E;KU^a z22wV`zvd5qKYX&P>fYarSrYW+>{y#M_aNX4r*}NBcfFW}1V|GmC{8}xxTnMP5O||H zVa|S{#=9ffmaFuA{VSWOVyCh?%ayD~#H0~_1dp7hB$tIhV2|#b;UeHB9oFK6-kR}t zB#l<8^bAtdk5~U`%rOFLjEIIM#u&OsQ>SzqzljE8#0~V~sG^c|J|cmk%<9mjpokQ` zJgiw5N?#Te8mFp%9kZYE)M5c;m*wIJj00kS*_b1`QomUuVx^N4EP|pIvYy%gh1(Pa z*#w2(C=jzTg%uaPv#Sg}&i1yPgzcBk+ddB;t&p?P47*tkwoQn@)N0v@MZ9Y?ao|D@ z;zz)2iBrU2cdz7%p37mJj0YpaexbSXBcTBTX{ezZKQr`dzna&3wD2IiUklo@_l0MF zQc-`4cO!bW_r1SLd{alL&$XDO#&s|%RKKRk+9&XDiK1~s(Cz%Ux@$g5S#=s-;ofDe z1~!rG6;E{?Le49|+7dxhCAr!NSXAXrT~t^>tC>+XT(rr;)HE)=(cYXnmKqmigFuE8 zeC-m^Fe1jW9{aIR56qO2Juu}qobzwE-fcXWIQSC6oZmUr>=sktGu#{CRP=p^z|{_ky_($(tZZepsFxvr|G3J^lqj5PM-*;Fmti5pzpKk^C;xh@@9y*mof@; zh!$4K3H~Sgu*FfdN1~(S;Z>qkQy)R{omBcnj;yNe+1w|EUAfN-Qi^?YvWvqCQ}Wx( zUlbrf;<~DGI`G|=fyyFqagR;COmXVywfc-A@g!0wNlorz!|RSi-_0A?(J1Q+mV99R z_1oO=&;HpbZ*^=n-FCbbPvx(zy8<5py{GZANep0Og;M%EH!?#uma|rI9*hBZkTwo3jW`D>&m{X`zT=f zKZxFh&<2->3B9J$kqdHX606`xR54eaOxUP`Xt4TMXp!_H zVMnt6Nn#R#Zbdq$sGj&T6Jk6(v%$<7elOj~j3=rHd8QW=YaZUJaUU%iNYE0*e)J00 zoJU-xY zmx>)?_f1Rb9Kb>6FovBseNy6`o9;TZMyJ<(w(yK#EFU*9i;yibFzgQaUZ9|bi>|Ak zHr0<&X-qZSifpVm*WU`RD5cXug>{ra(-9BbZAvx16Omd6G4qaWuFE!;jFE47Xx@RG z!(G@h$M1JMw^PS@cCk9Mr-1qdK*m|=LpQ)p>6hG9h97;!%>@R&OGVb8};wRlV9&rPrSrR8T&kNDru6`i>m z7@Z-E%LS{bqFDxMinY1{-PFfAmQ>v|#*i*rhATG^#w-O~i77XEYXwg8ECkcVOG{`3 zUWh@;{}Z$q^KW?|wjg1RtC2jE*6&f2XqBoT6_b$whE6dm*2#UFZj&#Pi=786UXhQP zzc2qEaC;$9J{DNB8m)8%7;=qH^HjNM|Bt~F)!Ab)onIO<7ZM&&Tg_YX7|$@9i(l|Y zKe~%%OJn1=N5ZNgHR+92psW1AvazJZrMCT+98%7`_8q4SD{E)BAQO*M2OsZau1%aS zk2aTPOAgOtZjaV=t|hMFrVXxC&b%s1CMH4sOpUAPt8k=}98}21`s)=@x^Ay5_8_K{ zxOH=Ov30nV*!h85_Z5E1pfbk9PR z(Wj*6(0i)a-HD94OsYpl8RtgjIs&OG#)!TVBJeak!L zCf~b}2!j*n;B8_jiOS{O0AOkgY%y|w{=jXN6u$f&bV`y~I(Md;Ag*A*RFhh3*(NY? z=*BBuDt6)3FFH2u4N81k<*YyEIakbC-pIkA^o-JinMFScb6JG~G->;d2C4k0*Y!uJ z@@Q7QYlS2PQHXRWOLbP{i-=DKSK|#*g-q?^bW%4>L9wZ6tmYr!Ph&=Pj?kLno!W<3 zHeX&HnhaX6+d6mCoC4K!4br~HsvFE=3!;t;FVJ)$^E%}TZ=*%@-z0pF$<}v@YlFk| znPZO=kBv3rCR2ILGh*^m+srIuWU`yA-bJ=$<(Q>K>J(mB2t?W!_nRd}|11eL-+{la z;j#IeXwq!%bSGsLzi~N2o6wWtE0J2;$L_frK~imvor=ub_#TTNNa0Y}D_PSyNpYwus;8SGazeg3x++i;^tbcC4+FI|zOb>S@+pSSLUhycY;EPZ{nlaxqLt4JbfXGg|t3y_T}8 zM_i!~a}LM(eX!}!QH1AshX07Vr*`&}@d5}j%b3LD@jU$-$Ee8b#F38Jw z%V8I}l+Ddx$kZ0+!O4itTTyVqkla_T zTwaXh*SB8XgE zr5^>etMD=!jPR|WvKWpmu9P#Pfl1Zs8;6C1Y7NXh!V>G=nF+;U>;GEOMg1+CFdBnv z)t*@xpmW;m9H7ZC{5Siel=~g6_PNO~2#%oSEUq3QuyE$h{@1QmnNkBXV4Ymo!B^gI z^BhOdyhC!*Mn1T+!RzG; zLjGb)Roy~c;`P+>r z2Ftd|WX|!(%E?|?X;e6s3tDASGLS!B-&9Fc2-zJ~t5q&KO4a_M)^+M+1kuU7o@x18pWpcbp>t?vggpDhtKBe7-J>~n&tP^!joRNFN zFPhhwJ>TC-@CNI*s8pF4!QVDFx#7%7kzd_jNFx%<5EEKXNkQ;MHDVfj;R}6KL0mo5 z^c_0Mh^`M72eK~|C>TSWM*HMp~FlKjm%yYuSwYv(><$nQCdl0wJRz*X;rf}$$e4>w7H%f6wYLn<@tk)$jxN(0>DhYYJ>zd zQ041(0OF`#n@!N3(M5zw%f^V};y*d*XzV1=!o&5BkO!E5MnKfFv}2>Ys5Z>8!Fv2L zmeB};k%iCbzfZvgzS3mNV2|wA3CzEXZ8H6le=||oJU-hvZqSG-y*h+dFFc9p|61n` zdJ5LA%b2JhyQ4RQ2}znTeu{mXEnwx7yqrd`)WGm3eK%D{&!m@_=fwZanYRQYzvPh2 zs1WL<4p#07@9S2aZ^iT1Cp&*f`?SltT}d_R) zXBofV`v^!)uIXY_aC5XpT)1MLj-grbS~b>)=hD5H-J&^mq~W8vM{Il@hq)7yQWb6N zhfr$hvv`&Cv~AZmCOHq^>d>A1n()%mB@N&2=x&?I(52vdCB?Gqh0|uzQKyxIE{3}6 z(6KJ{^MJW4OZNAXVo$B?m{Aq4+bQdVeE*N6vyMvSd;jv-eODCq6f6hTG#<&c*3s zFQ*)X*``2N_Lr$|f#?$NZGlMdxJ^0-u33f6LjyqL7RUogsbvV~FYYXhB91Z+orFfd zW}z!NTL-(Ov}*~{_vC-IMJXLpiEFtn=d66Yf1GNQ*3Q3ubQ$Vc@eUe0_$UPANF zUsjt!_bjxca*+Eg-UtPx%jyqQ7#q`W&DLN&w4A&kH_dD)#)b-;%`bNX4Q<8_ntSGL>LIJGoZ1e89gnUB7e_dr%P3`*vzECo=( zDKI~V!1ar(Jk9ukBELuOTY*IWlLh++b_6oB(7Ydc{4xpr{Jd{y;hY^DbrDn`6GRYJ zpjyCM07VqR+v^`BUc!IMI*_v;ycc&@;hESQuQ{PrA?xsXb!Vwga=FzmVmXGSo2d{= zQ^fNtAItn1+>Ej!&1twu5<^#|wgj6Q^+v+VUTI+LAiAQ`r+3HZL;3AaQOlKD*MT(a zw>|Gyj(VRMbXZaGp6Wlcu;`8-@?Yw8-yQz5OmbZuon75@>zno2d>Cx9NZq&zX30W_z#N6E{ZN67+h(&RS%-nRYbJ<6S=Ya4ynZzVw}33UKRT zONHyYpXh5^(C|#?kei5c%dffHU+R3MBDv2Cf1vzW8_T|==y(In;cX@%glHPzSugZM zR2$n2SV4l!+<_j@#9Ro}gV^Ij*+YQkGc7A6F_BVWm9BL&748S>J||s?+cJDb{+dy5 z?nVBZPRHFL<7o(NKbcIujuS|OL}!{wXDG*A!h9-FPG7{i6n#v;YF?Yim-5|QHa#*t z+C-FI8q|)lqMwXVGQLVFPoZP()7M$oEY!26N`mas*?Gl#4u`XbvtHVsV&UtU^Kk^5}uX9+;4*j=F1>I^hd9lDTgL{J2qoFS`WpyyX*c`sIZtIa z^|?B6Goal+oa)mzhOQAObNwbty>+t(CgQwC(tnM(c|fw&CK%p>dGj-0ybN-bX50gT zT^qgu?8QI#iW1ua0g+ zEiAxL@6d-AThaTf9IFM0ZB)S#BNZ-q<2F|13gX+Y4*C=N+5Vqf?tY zP_^)r9eV!S=TFz`ll6p8!StT#`5ej80yL2eV{mshr(t;|4s>>dptLjG$vTKV!vH!N z(5D=_&Pkjc&_(|SuAkg9p$S|)oX?^hp<|G%p#dbxR&pz-7W4xj@SCOpcjXKfUaM#{CLB?DSJn+!^eBp?DXoBhJV?99&lP~ z^UNE9um18_9@<}e?>;xovvks}ZAfA1g-oJ3lne8Deud9F~>T#9{K$3Nn4%q(rZnaeL_&^RGCkA+3HQ3zsRm?ub90` zOzgff8{mGnJ%3z|aH?)#P!XR|Ei~Zb1I1os9zs$uSNghY@y@i5ymGblxA)R zl!7l!4*_Vv(TX3SfgF~{fDkCZGn!Y4M}-urw~T5{d2ZLM^(^_Nm#wx*iV3L;V?v3~ zYPB$;=w+LmJ)wrD*IJS3PARz-KIsC949uBAGR*+nR%*g*v{=sXNIiT#48z5{cC=eX&gPa zeqXYz2V?^6au5Ulfj4vNyDfeGV@WiX5y=es{2be(DK9AMCO6`)lR9;2F`2Y2-QMWk zY?uKMRg)uPAeLxTCS}SOce>6Trxo+5X5Z`x>3dBX_6wuDSg1Ol>b8H<2wnG_b(oNDF=vJJ{JzJ| z$0%N1H(Y|~Z+pMGP|_ZbIuJH9o{r6WK{J67oX4+R%uKM)eD3eLRNs57*Rx##|K-aq zhWc$6jjn!(K5!)k5TA)VMte-7Y`KtD3C`sWa+Os}angpA-z09tfmow}Z zxXE`x^9;u*hl18ufSm)V{!beMu1@~fBb&qj+Q=Iq9ZE=chOTlR%se&U-vYu8CJ6M!_9ILrKcrNd;1mrg-^_)S?s%EY zMhkccd{IJ*m=F^LZ}G-q*>pJoi1CgeMQGFvPI21rAByOv+T=GJ9erR&?$KG!CHD8# zE;o3o4d^ZIxjpPNSUTk9GWcdWmH2&RVb#LjZMtOZlH0`m#AdEDebH*S9Di(KVDEzK z#O&wY|JeGEd^_Jf+s6hsGd&#poK{BM$empCH(Y8v-Y?Qz4-By}*o3WKley1?V_kn{ z8{96mUYq#pX5OSfyn-)lSR4c#krg|gm9~(={#qsblGH#;d2|ASz~#$(7Bd4lg7xM$ zKoKa1Sq3n`3F{xAC?pY!265o6&@-@E1tvw`^nk{-*j?*MRmb@CfG(XANh0KL81IyX z?7vt9%_{$i)l)h>EyXIIflsl-?&K9R6>*^@N3wRTJBsMkM4WEUhnNWi3S-spl2#ja zCv;lZn}Mgen!2YmbE>RDGmjnevP;dCEV*l&otB<`#x{iUmlb90NY17nHq}YyrTdu1 zkkrym%vw_JuolgCQekD@mQ&=_hQF?2=~-RRz47#fR%dsEw1Uo8UdHJ^dbfQ;bBcQp z_&&^A>QV9u&Mt4=^Hk2zZx|qSQQBEmHvUPx@iIp6#6J;FH6O)0r#Ndrk4~pP(A|vp z$XwBziNBGLFm$72)e2y&Q+%t%F<(=;sy>;$q2I6jjjN=#*F~GVQM&4{QDp1dX!0NYj)71OSRhD$ui~I&fBGsKeTLHt1^yvPTQf?IN>Ge7~ zerKE+2yha~QXe_vR+t_!V&K7-Z8O2=6m;8gyh zm5GSrBGRgE;4K$5+YLp6EZgS*0IG8k2M}tEh15W%EE+ggd0@IWpdTnpJ0o&de4{Kx zj-f1HeL?Q7Qe(%eLMObXdl~i&@uG`E=`Z|9U$>G2ykm@nkVlQpsv=dK+k;}Vzsx_#O z+k=|(8j)+dYPo823z2MCe97pL0x$ATXR%B+0#bKVLP{yyEg4|vUYQU6dvc?9fGJxS zPZJUfXsb^^@*q#-U~J}_zR5kn7LZDif|^3JXn{Om`0Mks4tx=|ELjvv6^bp_7XB%6 z^-z##l*qRj0g+2WXzw95>C}W&gpQGyqKv3NQgRGSkSQ0<_q-~6hxfg|lqBXrqc1}2 zy&%r6i>I55iW}s;06m(1u#iXhM?G>f$8o%}rFYy)v{7m##cH9qeEEx8;n3uopjW}b zi6v`dD4QGf!woVLu;NVU94%ifAy`h|*fw*ko7db@b>Uw+w^QU)wiLT(M1amO?`sn^ zr-t^j{l}&{b`5U=5eYmS>NmeDJgm0m_J@G^|euQ zA~}26JR!M1SI8VgQ?5Sd@Hr3J$M7o8Qt$lbgU&1JKH@Qv|9ODJ^JT0oY6(L~yNsmH z+|rRw2`;#3Ae*{Rb%ye+D{Slc}TKU!5lCKYO>G zTC%D~)jf(b9*>iJJ+iwd^t`n424>Cudvdep1%fFhFV_$uH%m`$_(rJb{kPl_Sy;TY zo)>)7<*&tAITb~AHV%71x(We+FY2PeE0As}!pYCIulj-gajFlFC!SBP!dvEs633yx z(nU%M%^&6U;ZEI;6=V?Po(`Bf66h~cx`}u(@L16X@on_BG6p3z*$6+5*qM6*PevrI zSR!H&#MQs(IAqWIh{|zv-sVkolUl&W8I9-Ynj^AkX_WI32C@yoxtXb6j6A#X9Bq%j zzh;8EgHBrDRWVWdI+mlbgyiZImUTnew+Bisz=EP_Tqn5vgN!+=IOK`q5F+@=tO3*m z)3htt&x}M(v03F@iq(J#fG2PQ+Mqd^$}!I=O#i?w$!pBw;lIiME04*4_dtIEw@{df zQr3fmCq-PSZ**d06S5d_mb%YagI;ACEupS3ykw=$`G4=nBTgvyz@~4wSl2;wLX0p& z0BNNyxyD_Tccku(i9_A)n4sg^n$`Xkn+FYl)4EPh_7a*JpN}x{ zA8YytemaF7itB&mc)mcrz|f{B-bm@Dwv5FrsLlDuhzU3WFU=BxY={Gfz}8ZEZ<-8j z0f%q|4lkZsJ3eSGw@H{iB2hLWb`v+PHW=SyeN^poEXFZVy(aNf6hYsY8x_x3zl<|pQ#l+JG54>jB+uNWm3ZM z%`3OK%JeCzwG&DER(#8j#dIrTT7O`w7ZuolOp{~&wN6MWOF4rnWo3RLep7iKYoVBF(*V z!S)sHOUIal5(L&Sa^#1Ri!gb_m(gL^LuB_v6C92FFb9K+AeEL0sEa7Ul~zP9!eK)QZHWA^ zwy)}?D!I;&IDo3yAgXSlzAT?Y*P=eGsHpZK%h!@rk0MK!ebKwlflIkN^Pwg6t~$%v3L^EVMcCC+A^a8Im0IHji``lt2BzHm#cb9^YHWN9i^( z>GXZ;6Dsn7R9T`h-c^Eojq9wxi;DiibP5Zi0x=OUS5FjNjO){dF|>GN~XW;>3Ut771?8Xewc_pLL-`YYcA1U z`J2zqZn!#ik1sE|GX`0!H#{k$@$0cZB@^PSKHidj!L!w_0<8vEFE&qZd-K%`1cUO^flzQ%z-0qA4)6o7#ga|mDs7Gs_OhagVa5MUNsZ~Bhy zaVqo96cZGtCURq<)h;I4SZQgtUYPO31OWz2;_jaHM5!|e6bsQ|4XQ=9R$=#4cy zrd#&Yt~kxJ)Y3LDGyTwzooF_y@REHa1H+s)|3KEIuVVSBr&GU~PB0MZ&&*qyL3!I& z4jJH~(>4^AP3@FpSN>L8ty@GPvLn`mKj&c6E0-gMj?E|W&IJQC_70ty*IB2n-ekg~Uq*w~Z2#{7O{VrNdQ+Kbwb;uhj|I5GkkY8?1s-?OKwp zZ_qP)4IGphu3fX%3M}Ei&ra3pqXTkIo0;eV6{iW-{UIm9N+Efwz{k0Gd4}%$rug2h zhhIwJ#d%+UgHpAnpFuN)O-ovV17%4Y_oJ~z*6XnN-okHdk(ZDNoC(JXYnK`i!(g)=l>!Bv1)6vxskq+Y1%QA*9}FIdU5-0pb7<6c1bh?nkJB91#DoU8pOEVbVUg9ItWYCYJ^0Wa2b;7yo6qA~qTL ziYeRg#$HdcoFmZ0)J0Q-EH0xWLP1@dvEn+7)CozI`y!a{fx>tSS=EY znO;8PMjO>xFYw_S`?KK?#5=LG`pFyKbA9%=t4u@xL?Pa)T7LK`{(I%Q;g`;J*_Yx~ zOuKx8h2Mzu7`z5|fNkUVKo}Uuu5UE}znYx{K0$w-lc0=uoxW?AIvmKEg_P+<}_JSps8uP5X%uan0B)?-0o8P zi6Xe|xwPA*HufT!{iP}P%~`UA^|mYY@HBsmR8n+YrHMAVgoMO2r2JvtGXKbUSai{9 zh&EjO(eiF)euE-DKR3HYl^Bpy++^-nQe@Ujaa%6vZVJVp%hoFTXgiZ7mcV5ykj~*J zqV zQt#_LONC{<)UzeO${*7gOeidSZ}=ruq$(QwAeB{XXGNmLG&x#7rpb2f*kzFKwGCK& zr8{+ewC&Fd8!>mcOqU;wb!|>F?Z4_Wn!P#nod7TJo6PavE9jiH2@EM1nT-!v%Bh=O z_kUK1Un&WCmG^o{G)%k5dG&9!ZvKZ=-RRfF;08VHi>rmpHH4aC+`o~jvj7YFLXmb`@NN)Ix*4;Tu; z9WlTz)J^jr83S5 zg?&3Eqz8hl&(SNpY=)``x23(Hk*Z~OfgF|IF%yH*q3UQM=c{vm|SPHyu$JzMbGsm6QE zr|qE$`!l!pLL|P(f(CdUIwS-WlAbJ14E=fr(_v7P-GbPCchXGEEltDjLU^u*6Zos6%lq3 zS*Pl(@O>=DhCElP;;8=35K_Ko`&&OLmO)j8J2mYYt z^Vq1E6rZDGI6d)yzh zI0pTll30d=Gx(>hH)Hd}mxa$~Onl$vZOn)UB8n2`x&u$?lFH4BT#eY2t(bs#T$V>P7Ghv`v{%!aeMVQeqWZLkbnw#a~7K+87z|SZFKo@Ya3+DL2Rb7RWy(n+oRj4w7JU6O^c&-Xe=%~Xr5+;tI zEYx@=n-Fox%}EXT0i^7-1{{qNoBYjgFHb;~pCWsvwqY-jzLUpPKB9F-r0EHv%vE-PC2jgm?rTwsdpi7Y;T^k2@RtSW^g9*p3+j==G9fv4WVv91ogPJ&1uyrtp?VkWxV9bXPjDn0Om4n~7 zc*(~(V4N!%Jv`<7_6ZAdjfq~pyc{at;0`GWKAtlP{? z)Q*l%!PK+uKwslA+f5h08=b6Gy5H3n^@XqQxdSB|t-dCcg}bhyu4DUK0)ai_?6P-X zo$<>Xw>>)tRF@0ggIb+tiEbb3eJ8Zs3#x;A|HEfc-7Tr=&A3ePDm27^0D%A(%{_p4 zaNIna?N?XELV+@f1cn!=fO2D}fk)sea|w3uyzC1hRL<@Yq==ZPXaY^k1-_R|vz*d6 zPWtP0%itKP!B^P8le|J|$4oNPS-Mtc^u6Rdv(3z$p!0^0GbVyV4bSHaCGeZ5=ATdd zV=-DZ#=L=jo_##B&oG5N?FG?JWvWE-=tnb4C}*&$nW#KZt8*C{MHlRTXWNwAV@Gzx zi$@*$nK|h?R^n7tI>KC+7EehwKAJ*J$uP#GzRtd2X2)4hO=74z%hdRAR}H7Q)zA}a z9dWl(u4w*B^30hr;G~Y0SDNu8I~`Io9Z8lhK7%17yBDuwp3?LxO>j@h0_6(k+9`*N z0?h^E@%b;zEaTFPoH6amNr#**pC@Zny~1^qV&nI@~w^fGdv%ciS_4zbYFPD$Q#t4= z)vA#lxE)$`f{wh1a+|`k?f2p6o>Bwy>fj;eOf)dq1S6pgdnocpRsOU|NVh1LRNoLg z3L~~~Nf^LtT0jXs7_IBIjJk?)hn-ZK^2IJwk=KfAwPcB_FlLOg{B!<;+2TeT62*B| zW}Y(8q9s>bWxvYOI3w-H6$xQ?H18e`apXtJ6rD4um*Xh;pxYqFe<%c9E&qe5CYd7c zgxBK0bCEHg0GoYiJp*n*Tr9T$1mJ~>V|!h=9R%5aX7iW_98WlflAO3}csAo>IPo0b zG3t;m&axN-;46@qy_xl1v!V9xas}acMf`Zan_m&Dhue-+j~M-C-_fNtXNDi|37rXX z_UPH28M3DhxGzsTDUN;F@^g2d6x{wwn4huST6F>!g7*ep6z9JmH6&KdIqvrdw#~>K z6-fFxIdx1WmpXJ~8&CP#HNINr?>9EFTN_(ES-AI!ls$20`&4B2A`hv$y zSNFn{$GxV9Q)})OjZ!m_9v2TcwhiHzl8jaVz-F-kAPRiJK7)8e(y=D&{nArCBcKAP zGpYvZU@k_5ZNJOLJzynd6AJ?okU;B?kVMWl@6H1SLRm3ms+U!8i6Z*CstQT>UCgwD z$Q=F+M*1Y(nDeI3Nmgn1&9}%>X>ykJX_`@&Ozx&9M=lv(F8-XHV`fnbXD(W)7B5i3 z&60`)k~WRuS$6{K_3kk{ec$Rxr6tDXu+x{{(s^)wSv*D8ZRlA`CEfOCastbtPO_Ph z+y?6=`qzv)zs8Dvc6sdB0NXEB|a{4N}ZJ`NV=et z8-G4)QvYEpuB6H&DJitv%v3O0v`QM+M!#2g-FATav(d$7idom-Vuxh#H^A*~r@*RL ztr?VvS`iy5Y6UyTDV#}eyK2k9eBBmr^OE_oGuJLV{d&i~ooWWYcfm0^yJytc?N3I_ z$VZPqtl0@~PyPJ6vk!x-b2MgjLgsREXLSO;=H)Dv1%J#-UAYyZ&r)3a5x}luSkej> zDb8Mg?)TWu&IYA)9@h2GTJ_8!Z@>lfMks^hKOeGGxRib(QkRUr7o(24rrhmkDtL8KIX zc6?dcOu2KE1=B{UjF`wfB8_`|WQSC^Tco72VDBrV#P28_Is8OiSs}H0MPf_&SJOT5 zVc2r3p#-Ru(L1c5jzD%L$|fQ98()YfD~lYKm-tU)D_22q44M7@N*gdU5Rf%ZadB5na* z5E*|erx~D||Fufj;BUi`B|Y~GHFY!Y-u$Jz-Cp+Et;Unt_VV5R^L$R1x-6$F@a^5v zGX{3H{V_{i&NU;B>!;jrPZ@9b5f-N#H}mn1>~rg;Yv1g#-SfowIn!fVfx2_IPL8C^ z&VD_kkY73c{V0_&*vGMXBD{H`bN@%O?o{Ma&J@W>!QFyL&&jjf625|?5l1i{OPqidte+QXs8ObK!dR7 zfk22F?mW;Aw%|HI0#qCehm=F_SnL5g(9>>nylX;0L?!GA>{Y^=W)Sj7{Ao*GH3B&| z$jwkUk1x{(Rxa0ymnx&am z4tFBU)QY*~b5~EBYJ@+b-om^eFkl#-?wiPob;yihd0R(jn-+=MzRVTNx3RvNU7C%z zxJf_H^uw*uyi+QSN>jZO{~BUwKdEnwZ&EWen$7U()Up^WOm<@38K>EtrPdbrA9;?Q z>s|-*ce-@E4;E~-H3s0b;l-*>M9R(hI{m6tsrY66bE#Dc^4c#Gw_*W}E73iPM>Jm~ zmS>+gyiU4Opl5J8(Y)l6sZj#5EZHocvQ(#UyGNIA{^Yz#D{A@VY)FZ0if|TVpqe=d zd(^M3arm>O`*ld`So+zvNA@)t-8~oWW!Q}6KlZS!+P)cw;*6>RPG_&2%wc~*LFS9m zLbuWEg7F{3)`H`+RY5MrnG2-gtA(GJD4|F4ek_>=wiVVdvV!{aBbL7emK1$i2@cLE zo?nLe$~d4g5E-2Ev47TT0DxD3w{`;DQQW`$1mwA-S)^SnaZQOtPn@6D<(LdDBg6&Y zSg8S75mPS+l;f=Gd$!-kNLd!lgRCfgU^7E>6dKqRGG47&=oL;w2OP&kj;@d%?jl}A zN-f`>=x)A>(0c{*;`hQ1O2vitqDzX0%2UOjEB-tLNG8KR*QSe2DHhi6ibX2juRkh! zLK)fWCb6dYw8Md&*!H=zN4iAiX2)sqx61FTDi8ipQly7ixJ!%M-}@t$ z-VfWuSN4ftdLFK)d3R0R+Y<~Oo*dkJ7bZF3y`vW*H)*z`=TkU7w&_g_>K+Wa{n1G#V61Li;tEM9;op!2q0xm5YU;9=<-GQ3GA^kH}2J&(ScH z3`Souy+>UpO_@8>6?+Ct+OkEaFAXF@+#$12a?N#eiZimcp~cEF+6Vle)ACXp|x0rM! z-_*c`bSBTkz&5$L^gR}!-LHwU49m!AK{~k8!RBBaL;8hABZtI{_0|I}u(Xi&K9{z1 zjkZ&cAL*rSE6)5(^=@s)w@lt1wBw0PrT%ZOt&E5PdzZmX+2MOGV|1-ith+>J=eQ10 zDPLo*JjkMWa9KSHRuZ_T678Esn0E~n$UZpF?{y`AXBp?;oHw~-8UPgiw;1Yk8-vtb z6FskZ>7TW#e}Vv@iitGv0TSU(6>$}jPFOU;qb#Yf++lihsbO|m+NG)6CgEB|wzt3& z0+nhyZ0`gYi~xj!e98tu1~>)31iC>u49;z z!x3t5^xu1s+Wgn5{EIaMhX1@w0FJGl!QL(ZUsM`<;omjktcEdPNBz0EX#36jsOje} zM`|W!Bz%lYCptE5?c0JURqVSvsIzKrqMeTx+==hIqnDOFt`9n|DtfpNORr12@lOEbQB+_YF$1MVuljI?b$MJ`U_H1eWI zh8@+=rc@`S>WMI0(?U$+vhJ6ix29)~*U2~$vsbGBIMn3as`%n?J+mb5itVLzxwwa> zPZ@)LN;(rMSA9h^PLqI$J?)spXv(Div-mrtGX3D_`wWuNM!ZbErKw1KUG_1fW|CLg zvc1A$seH<$+kNvoCm@W zvC}!r9*k)Yft(TC`Js5&n!Go)%J!{RV2ZBY0kyP(__AYReL<>v1Y;s3=Qmydgz8 z9WLB#C2fL0w1DD5hLKGcN+B9j&8H+I6;oPdB%)y6Eli1HD&-w+BKH&>TTej)jist3Jj&ZWnhXLn7NkUbwv%3_jGTcr>I{x|aj)CcW|)pAx_>TwAg*^~=bPMN-PVgX?iz!$8vs#p=;Jzquse2i^QcSe zbnR9yo-(7p{mS{xbp39vOVbQ=uYqVa#l0Kr?>9);o(!7lqORQbBJ}sHaTA-z&TlDs zuTLlMoedP2y|UNlA3b$(d)o8H#K7h^kAWWSio9o96KVOn=iO>TJHgpKuu-8|;)Vu0 zLI;|e+CT)ra~J|R1KMC}Kwb_VoD1LyHM24S@f^N391s!COICRBBIgg=AjoNs1Sdmi zAlHA6M2>#mg1{ZQzq0O>MWad0h~yzt4h=1`qWxdZdo*fLqw!XW{C6oW`?Ns|4-n8TZR*R;gLEEFmk|%-Z-NOkGBy zZ@wlgk?iq6?RaWMP`<{i)G|`29y&3OQlq~Z|BPW|fF+IR?ikVI!GcOmNa9MxkhLi# ztuf3ln3B>UX&X!9Xm+UNU3gC<1J`%SJDhp9N8j^ST5E5E=ZVbE!@qpa zrUSzdebdu<#vl5OWst@q-GM=I_@`-Uy`>>Bf@|G`xOeoCf=8#4*<&G zSNmfilru4Tho}7DU4|xKyTs?b@dG!d9#wcsq$zmT8c0sV78)WXYv3z&Q_`1_r`sZA zkE_(S3`^C)Ubcux|5C;_U6%@jOEe}+&cYtHsz})>=QJvapcGph_{2(8{A-aCAK*n5 zonj`636%%jAToY41EgPwKcoMJb10q|Qw_hYC^|G5a9*)<5aU;>RMlJNmZpU6j(1T~ zoa%x&^(!LU9@_iK>$UaT5fzTLzq8&|Q0kg=d=K;Jqq|C@+&b-SE-QcQ;xrFX3ht;g zeXTsxM#G|E{EcsoG!<)VM|Ex~su$i>{vcVJH=9n^9;}sJ9QItSJ2?9*#g4je1FAri^?R@t`o~Tbs=(=Q`xkVDG}%xg<(zBw zg&aJ*N?s^&G4YDzFIt8u$K)4A{^~VkAG;wvcbcZlh`tM@JE+0fm|_scG)ZFK^m|}P zOScKxH^%2KQPi-#Meb=Z++JQ`>Wb-J7A)|wKAdVvz-kK7pA(z4jZ?N=`?Xsrn4VJ#wFzgm<)5%F%($N2VNp*@34CezE+yT?Qte>U zdk+pxgQPD$hcs1_nBiEh!uVbCkp7`0;Y<+28UG?j&*Xc&Wr?79N&MBrb=I3y!MX_h z+ti+hgLaOTjfP@dUK+Xmsq2ZfjBcF!Q~IrL2ys7ae<;x#o%VT9%snXm+fbg{k<6Bn z!^FVM_^})}YL@nxFyUavy|Dtf&zW2k#%@n?b*9+>$+GlSLfCX!(DJ)5rJ_44G64## z_{B=!2RS+OHU5;0qqDrkBYAvlhy5%_{DsSw)-Wr!F4X~fTc8Obsk{Sh09n*|HoyI{ zaxBCJ7}c)>et`$@!(6*OV%|YQpTvEAgypEB-mKq@xj=KXj|V~z%q#w528!vO1R}u- zPdNC1S2~5tJtnr4bxp8RTB~S9xJAylPFw7l;_rqUS#AWj~US05+|7gssi zh4jTJMRYKUcVWcVn=Yr7QyVVXRVWhcJgo5wjK(%QHmbe>Ws?Lu-4J8mp>Van&Ujo2 zS9jj9NcKXVl>TY?)~YbIc-gNdUTTLV152=n_YIZmtCzaGgzJd2cS3cFMY|VV;T1RA zFJOn;?@#@-C$$l#%>K z{yUG`yXUzz{bfhSV|-M1>z1cS_tH|QcX895X=V4T)SuS&XhlP|9s%${FA{B#!diPkW3sLI0!K`I|a-_f^2p`M-G(j2?!6g!S)V^ET^4AHgu44&Tab=7BD7wu(vOIc-4IGWnWiqfRBo-t~^&x0EX$5Cdm&xc6CeSDJzQd4nao zkaxYlZ1!}Nt4VrJK3y1hHcK-x*sPCk?u*pzOAxgGqt=xq8&s_iPq7b;Hq1;^^M&h~ zke!nuSOrRYmZGIBBdz3y-G9u>g=ThxG|3D%OCHK8GHBY7dM)~!{&CW|Br!ccnn3c3 z{uE<2W89=Hoo&vTu8hLcRBJ-o;W9Dn&5Zcs2iB~tC)vFg2F%$|5u*?i7ybmAoLo&@ z(uhtT@@v3CX(ZesS%_-+9DApR} zrW$@59qK^KGskE$vTfS&1XZKcob%`oEwrT3S5GfwVrE4o|%lFPkPJrq^KdvH zP$1a~=t-T*=@N-ms4OX$JfY%U#gzV`BG<^0vqj1Fl3)R9nBi_^sG8h>FiZpWpv%0Y0O#&-kdi?BXc-i_qqxwND5j>ES})IDVQ1^=BuZ7rt3WAEgiy0& zUZSezy4w6V^VS9Gkh!te0;%8Bzx^qSMHjg&1LIV}Gw6g2u^O<)pDX&8BB z#rmt5HpR^vbM^ajyoI05%@m|dBf7S%hiYCfK)eXm;R zI$(dHrEubn^H`U_!UF=VD{7(Fb+h;N(q$LDvGI*Te9)xJR;&|k8o3+b)Hiiu_mL~_ zROnu^J7!XU_n7Cq3COmhxBH;A(?ds-y|2$RPq=u0pV!^j z^zfNEwTE=q8Z+JoJW-tk>nc9YwTmtHo%2FvVXl&Zwh4Rg1q=>A1i@$eiC`6|ZmI}g zhKQQ!uswvv=HcwjLsMG^u!{4vEe8m2aX9RNyWHDO#!ywR1^j!i1fKi&GOjKDpU!-I zlY&12WfU*Teu|UOd~g7ms%M9S$~d-jqx}3BwtC4FbQI2r0rVy zrVEvb*)=gVO6Kk7GH7|3*7a!{Oa%*jib+Zt=1Zzj(ld4m)KEg7adh&f)EvWOsqCsd zGZR{FuD00~rd-7X`vBTZwT$yR^?1n%hY|W`DhtO$&+vY(d!8)sGNGzS8ugslh)F?v zebb<%Vgf#?$0z=cxvCwSaEN}{u!Af>-!lkE7RWqd@R8wC{s2cz`IP*bueqw3U&IE=RM@O~KtG3Y{0zd_U!%oj>UNUt!<8j5jOSYc|72A-8qAHw#B*23>4t{2zWVwKD zKpydvZN>VU|1$B;X)c12AgH6oz6R9pu$wSN82|@F8aD!k9BHvI-t~iFSqUPaOu;mAF?zt+D1BD2eNWeA65bS{`+GvRLQ8`(VU&AW9W&@p zI)J)5xDgWwKiP*4iB;L_&hm6nPVVw`z6S@}K3K-Wy4!ABRl-8rrm!aztJ)(iYhaLi z4J}aiURi?IH5Gc*myu}O>YC(P9?#oVp5w1PB})PtIk9(}9}j%8!ngl7_S7EM#+;aP zkZhBl7jz|cpIcrhcnwysCAun(OK$17A*RfC$MHV1-TT(gkEa{1~r|G56S$=LR?p{s$UW{jfkw(%vrcw7y?iQ+~ z95k^l_>pnc{Bw3-a;X^)#m_gwK!NfraMM7S77%Z5non&Z)38qD>-1J!GsB8aFh-|Q z%TjE?EYs3D`^xOQ*)x{z=>i!!*j}nN>4NcXsv)J-*qDq@(=&1YA4gXm*3{dE&&KEw zkZu@bjPC9MBL=KsG=d09$LLNG1woK*1nDk8q}L-2EbR7YcYgEx=f2Lx^y; z``nQnpPOeDn^IY#jtt3Qo}s(BWh9m4J65H7=Kpe_r$dghj2(0OgD#nz&v=cwq^*%| z5NM|JH|<#fhwk(EI`3&jVw^~bq;6^~ERvuv9$Oa~r`HlcLeerxi&-rItiW-fi(RZJ zF$brf*dUSlWnJqo_F54+Tx}=?IGP!z=yX@rU4vt{|E2mD?dC#Bz7nKuwW^-y9uTbth zb_^R^4j%b~amn@{?Z#TOaFsOmW$%I5KxPx@DP>Q3wo^fuK#_N5B!1iM-Rwd+^VpH!eA}X% zSxhlO1?b7~!;T824aKs_s;~mt5>0UsfJxS>?_Y47i$6$2+@qjU7jFTWk&b zN3^Pa^dbh@3Kq3jFG{BuX?S&GVk|W-w30)1)k2!CV&B688{AMm(C+g`?d_B!Y9Coc z6-v()Tl6VTpC)Q;$Z(gKN878{SDx(`cW|rvHKORAP+T{bUqQSA1c+d0W73;^`)hCW@jJRcw?XCUx z_&M6QF^YXP_+^8exZY1#r4yNh9BWWqxXN9w0Q%r(u9rcD9LHQVK_i?mF(8g9UWRuX&tZXOf;iV7J}++==L5b%&rZ%4 zJR`(5VJ_jvM~BpAmE5BLXn%s0l4@OIbzUYNCh8alB}@Bo7%C>zvB$96=?MI3Lt=sZ zkrcCpB1VFW)r}&H6eX*J0^;#>6Djs2#nx~+seo`)_Ylb;T*-JkDKqwsWqhJ!D#q3# zk-ON$@g=G348O~C+T@u$*R@p9ECq*ei71kRwOZo4RCPANF{khf z5<==f^WE7eP4e^=_H5*AMmU?E&2$N{FhHk%z?x`lrziS<)rDvJ z1svDWO|8K~|EX_lAqSTbOWLRbhze9Qu-6KDRCA+aO<@53wYf||OZ7sFjC7yM z^Li;6epTt}r{b4X9###BWGa!)g^3}Rvg*)c*Hn&n(q-83&Ta4H-@&Fj3K~_j20e0}RhRW4 zatftqwJjuxrB?Yk1LT?Vj^B3Fs;hmx$nfI#^|@A8%W!o_3+Wb%VKJAGru=~g)WwEh z1NF|e&Eg||&Y1SE(`{(A9`AXam(0k(62pUUTwz_xgJ)7?{et`8M9kU^wCULB#*X*5 zi%-{_eQxzWU*^U~4<)Q)aElWI6eezS#)=k9?3=Np(utXK`}F^?`E&dePyBjB2fj0cFE9f_cSN3IA0M(4 z4e-Y(e303TYSfs5cEm?pSt8yi8(?bnHc9t=QcX4z&Uu*{c&0qUKQyq)b_f+V?I>_h z5VN8eC#6?gzsU`W$TB%ix)Ks$d^NGem!UV17;-Gl)F4?beZa;f$tmlOokQZ?{5l8A z)ZjCYF62yX)d+eb{e5W;ibld@qmXf_30V)VaiphNdp3e;bp^Awn@K|@cby~C;is!m zW0};my6&gaj}()gP$}mUj$5^+@&~3GGZKeT=QIyRKeviknoX2+gK9M-`(hik7h*kJ z1Yx)0!dw^B?cy67T8eL{y0cTsCHN+SKuG5Gx5^LbhP^7c;d43C*sbhq#9w9 zS_`*KVo5rc=5~%Gn}$Z0=V`*NVd#d`mev86K+1l?p&MzEo>s>d5C2eJ}gubg|?&rQc1R za?Q}z4pC)&cyrgHQWBz~S6Vq55!Lfd?WxX2*H@)V&DfSI8EsXu1}Paltg}H$(oR{S zUQhxB&2QWkpH)e1X_g9C{?&Cx`aJAc@0h}8_|*=QQX2bf{zUDX`S*?eZ5STCYQG`i zF0lM@{g$i45^TlXbz<@Cm2vk&v#{woC(2~^sH4@(@y>xzi{8<-UU9R7{=TL8Gl{nGtN~qg!^1F)`q3t5tbuAp)vj%X5?A$cv-gUZ&X}sBW!iFV%`Qnd zmwDETndwyA>FjVwICrA|s#9f2{dobasIy|tB^Emk?}t7jcN#4RV2;tvXZn4;p28Q5O0G&_$$e8BJ4C

    Q;VNM(N9=M3BhyN8Jg|ks0!~ZIGn!w)xasFDtY{H~y+F?iUKjQk5 z1rf4p2g=VA1a!UC9w%rx1?r_Hzs7$z?oSr?vSYJ zl8r*npV&{9Uy_JE+y?d}S)Z%A-ibmH|CxS|k4;Lm+DX{Tim`V}{81q1Y@Di5;p2KC zwV+bieJ*{xln*sY8Y_Z0rlh*$2-(9^2&pBujtRz@7FHq29>tICBh$vpI_+9A9nTm$ zr{q2^IgPxQeKftrCM-|*1k_?DMak=nmPovpb(gYMLY0e&>I_NSBND+8GvK%e4>(?C zFQTFm^V&g8MIzSR(MV-GA}(VVK2@DNhJ<|qAB}w)*rXYepq3b5@IDcivv1-~ zI(vG+CX)nIpGAr#N;i0+LgED*pCR$2!OmF6FR8aW9=pt?9_{|-{4Le_LbO9ux?az1 z=h&ReA!)Dm)0{I5;@;`4NhbD0S3|%UtZbxfWERKvp$A) zSq86-p=amY7LTAw(;buX$iC^T6WtEVlLiCFt&N5=Ix!YCLzay-=5pO<&J~$dcAhNN z(L2&Am0+VG*3=L@u6FX=uuG}3Wp$(tuae%$49yAY%Nb7z^D4&07n`H4B2QU$F4?D^ zJlF1TuaVPJ{l@C(+4iop_ObQdLl2N@=UXpI+w(WY_U79cwErEJcUb8|Y6Jo9uL4Sba(upr1_Da>UJ9XnUUJv-^J3=(Y=u3s8;6dINgh#B=u$E`p{8X3 zmyZ5u>ZJKI{)MxamU`k3=NPRs*`2sQx={tt5K-gp!vBumG(B5nklJK

    9XSwEmN> z^J4Zay9VCLLy%n-+h{5%nkaztb^pB3am~eRNJ1tXv;$ znO0i#*5zqhQtmqPeDd`SY1>E1>RARhH3?mL9d_$U6~!NH=15=5cb)EJmX`f+a?Ih# zDYDznpC$cglanrv3)OiMZDJV&?T!jE>rxhoZ?^ahOO9K%|EUhdnAte1l@>IJVL0ovK=FDz*cTPZGkS)NaR91Jw{e(oVZ4Mh<@_{LNU1X-Jh91rtimSQHq z;sQ#JPEc^!MJwZPF)zyWhEqL!3S|cO(V{u=#nqO%-ZXZc-&L#E+&FISye8={;zd1S zYV*qcql@Zilo!Tg)alCEeX1J#%GDL(iso{Dq3fb7kray!t~uT!sT%e(P$R^q2D1k? zJ^xUS1q=YA3NL|Rpiqv<{vZgp$t&jaB~l{wM4O84X1@){q;cu$K2)%BN9#zTZZ~&>;u}S2b~;IofRX$96h>BCvzOX4>eyt z>MAfEyGnC68Sfw)qTQ#?QZ_t;CVx@oz2qk>$eLK>z}gx=Ze`eejRVg+@tHh=*`0$@ ze`4NT!q6WPnDcKK`uLBtlXM=u|I|sE6z=f|FE!B*)BEvCy6;d3UH_v*rnwsXJi)^W z4|>O8?O_JQgB^)hfCHDi&lV(tbCq}lVhg!NOaaMrZTQT9&AEsDVmRt}2tk@$vI4Gt zCpql}PWz~G&G5GeA$S?WiNRo=bs>zag|*gMi0bz-)DMb{jk;uc5a*v%Xep2sSweJFPSvS6_CPGoqNNZ6$2oH(h6^vc)HH?_CU*Uv7r zD=id{%eF-4=z2ZWDUB&N7KO&d=o!hX9Eo{uOoTp*i8S$4iHp`X3|06OQ(*f;*(`Ar z83(h9dV?%hQH#;U*&!~ac>CQj;Y%_Pe5mb{=zF44?^j|$I@b7NoKY6iBr$gQB*=Ur z9$xXlx*(2HKVaJ$9aiUHZ5Ib`)j@tHed+0O)+GgYvh1E^H}*HW4rKQYK5<3o4o*NY zb%m^v`m|eqUiJJyys>?NfQWJfqAI8Br)t&3uHq+kApPds#G$6nch>^+CFYW z*H~pKo2eianD$17@JClcR_uhhs}>e@n$*oogSQC#wO;Kz>gDZqs=|t|18am5g$eLP zV4lNR_+Kvug#P?P>7zgefKW04egPlQ=@2eXi)3s5c@eApF)?k~$x}&EjY_kXpQN=_ z@HHNigDRKLw@7ZPUTP#sYiR*Z=j7F4mMz|LhOqut4Mi`wQB$^TuiA(1DtS7rY4NcU|d$nxjUUQ1xSU#YYhb}Gq(5%9(mqgc*!G)Kf zt^*;ummzDj5w4d)*ZAY(rXA=1^Ol^vFlFczKEXF!ZreGy*HdAecCo4jW&W$1S;1qp z)MAo@);DYX9-5^7u13(K2%ddP!03{qV6LBmu5?^>UFLxmq4A6D^+LgO zx@IvYD(4aAI}PUtogLE}o($|bA8$hsOSy;sHX%$t>N!5Py0L*(8MwN78jBp3XKT_o#|y|*+}vy-4UCh+VI%U(`<}Xdzo~`;U401F2YCBn5`G}?=n*>tBKLGFfGze#9J`3o*#W-B9f?v z^VMEVvLtBh>LwQ-g&K7v{D^~F9EumsqS#esD4#ZWvC1`XsPz)eQLKH6(aGvPmyJH1 z5>lLv6iAt3yO=&pk;v|`HDx=-)H@ZVe=iF{UQNH3N4CG08J~aC;cWpv2Vy&!6B_p0 zv?bdJqo{Y4^v&!hEIUraKm+O!f6nj*v@qeK$(9N#`jT;y@}1~U<~+)Gmr__mvT94%I)Bpc zS;DK9oAxD14jp#3=w!9FE}NstVHX^bk5j=tuN>_%LI$eb)U#X$KfBpxy`Buh|4zR; zri#f=Z5;lN70+&I9dr8Q_uA4|X2jtQ#})4Nj(W8e<<>btjTqIgg)cg<)m~F9tkyJ{ z3^ON)M*n7+8;8cTZF#hk#_!E{?%%ZhSo4n68o14LE3CTf)uR>+_|v^pdUrIC(>pMx zYGz@l#H#c|BsZ59-;{LFznVSd^$(TmK_}P=u!lj*92see0>&ceicQ41r3q)|C9@S6 zRm0-n6lKnj%P2rqn-Zl9)e>4N<)WbNt)ucUV7EKQ6e|#j&NxMHgv&)QB_FuK=#a`U zgvq$AGD&@O$_ko?(CNvCiot==^7{Nx!kX2!rc;_r2)h5t-4*$5$+m)(OFJ8}Q*<*1?xBj%gG&}R2?3U-I8QoW^VvHf3 znFUAnfo8!F7$UcJ&t(`&sWjD_SGbU$X7XHiuJBs9fx+o=a4VN(W$Ck~W45S*%F1?Q z$I~A5HkL_^^241dv-4p+`$(yVrHg6~XId`zEh8seo)2#z)w^V;EIcX){4Rst^+w&7 zo85m-3#`9E-yyJ2D&g=5&ju&KV?=!og?T>tg))izF{4AhjWL)x zOV{-=o;^b^_O_kvU`gXnOtsN;d~+ufHnorZ%+Ze6Gk9Zml>PQ|xjq3)aXj$64}x%B zC)@?pKu99{w4bBWTMwMh>F?jk3Gk--M}kFPrlico-kh*f zC#eL+^y+57Goum4LkNLnnEekOL`IcYp8j@$jQ?39!IFDnUM7s=ty5J(Xt)PMdbf>(8&$XHnYEz`!{vSE;MI8 z5M}C~6W|!DWt)#4p;$jk`9}OnV`JE%BtJ6@tUd{6*$RD_ znuXGbd8J?pMVenzS_6VL{Sw3dL$unHQjT}%`^Jss#F%^~-8lub=t@(mskKu|-D*4O zlAm;_tqMD`*bNU0qc&LdOO6Z$^5m1aUliJrR|YZJXVc!td| z#j`PSY%mKQ9Ta-YC9MQ8dsj`50F=PnUQqP!u)PXxSL?t|0r^;`fyZLD?l6>RfJ=2REc=s&} zztMU-hQ7EiwJ*Jzu_V0tt~YE>VwD&tFljV5=yiC+Y;3~*#=uZ-qs>HjS>rRao%Y<4 zW&^V(Qrs~uo!SJSVOUv}q}@H`kiuum%M#QKhW%UF=HljxBqL(!$hlVYfs)hbSQgWT zm{Z@4J*u8GJ+>-otiC9R?5*?boV2;tu-$`m{M5oRknCjIrZ=+dxYF}{<}gNV{PWUR zG<`yKb==Kh`hYCr8b2LOmh!+)B~ds$S0*(n`?!^{>tsU$Wz1mp3#M!OI#mU;Kc_-h z#(B-JvJ3;{7mQi?K0jtZGb6lp##`yJzVC*h%QnRIz+R1qVojE0_UtI1d_XUGNoP0#~wF+VuR3+{@*0x+4+Ffb9c&->Cpm*W%Pn@~>3O}>gC zX|4tV9wGoK<7N5k@nD3M13vHu3*QKe4CFhc3!oyTXOpC zQ${Fnl5x>d$B^W(ycXNfsaol+Ry=8T`I^?v+2_-KnYZUsa+Ymo^Uvhh+lQs6MZL1j zPwDm+F_j~!TFoL9Pdr43D!xdSLeP{OVjPvPNWDv(Q-7pnKw@cKR6aserr5$p%gL|e>&<_zlsUrT}TIiIThz#AU3D5G|OgfTePd~8mPi(Gov^GnU zZ6?}}rAYNyI3klGdcvG6leD{uj*)5cy)KSH$@hBuoDLFj1Ml1elX%9?c=;soOmKSP z6RJl2-Ijyg!s9e5GPn%^!G3$c63e3rWO0 z14g*4;-vUCMNbrNh^)w(pP7`NPzgG(Bui0KY}l8#fZe=Mq3jKRKS+iqtG7?yR>@W8 zn+;P7)uhcVsTOL9EUYNct6%7AhbzGM$Ax-!D?c++UWe^uQ~Mvh-SnZJefW6$H+AOz z?X5j3^?u*>CRyf=J6(AxWGnT;lS{NU)QSC>$^}KjtETn%|{G_K7denVU z+`VPeVb#r5epZhBz_oXlLa9O%XJn}ly>=!QDVJ~t6Eoy}Z;Po-iaPen>@yk}^K5pG zvEz-pOxVH@X$x(e0r=Uw-J3780y z{pnJR;_wIwb(Z3@sBij1FoC!&W2!nhO~&q;mTnQsdtP6noEDyI&VRBpA;bKBNnpec zrT6OLyz0WnZ{O4DeI}B*3k*=m`vU2 zq+du=y{&{dromb%(Ja*}CA+vT1%#| zwA5Ur6X*OP(Gy>|7DSW_Qx1QWCD+Q!zET=%%uzfB&F?v-w5pam2va$Sh#xCbiH2XC zE>$(t@SRFgJ*lBFZ>{Qwz;qvh#;JJ@-0k8lNn=Dm-Q9>IcOINudqR_V*vHVJ7Cs22 zC({BSVi;YNzJqF7?$XC?i5|zfAFFi{E|ZdT2JUOa+k=nnS$!>S`Ie1cPfw-m2{hV; zJb@wV6kPvP+^Wr{CnmM0X;9m+`~stXB=-jG*M>-;m$rE6v2&r}}W`%V29T79GQ$tZDhS z0yUggK~tbkt{X?9Kzy9vj&y)}IhR9@fq!t9A8F!H;}Z(}4r$_L5}Uy$JVpVfkPv>f z?*hjc9OG*G>maDczg16=xGaBSy95aRbXi% zJMYyaV-e@9>z0IY4AN|gg;+Pkfw&u}K22o82_L$FYw}L8n6YN|{S!~jP??s|A0OuRO_N2y!dH8N3_DZ@JMpr|G_e7qKh zml22x(9~3f#%St2gFcB5GM8078?9^Z2$PI`;_yVRBHGwX5}_Imj;S^Bh(cslnzTgc zRyA5bj_PlRI#8pbJyniyl3#z8V{~%MAlm6xvfLQl%`bj$DAglA>TXwvqnVFX)N2G* zJ((vBWFo>=9kcnpIYI$k2T@6+C6nU`#$m<=nz;;Ui5%y&f?69?Yq8PL4j#H{7y45F zHwD*{XXCd;8lv0fZxs#ywtdPtwU85}Mc1GXHOJ917~W&@l&jR=lj3x;BtZDCd-8{OGH_Q;AOt>lcEg~{ce;+M8l3U8cJiiCabc7VET@C^7vW8smb z!Ad1?x6#kgVRg|<=BkI_m0i3lMd~)|^=-JgNDApu`hYNb^Ttkp*v5bRv3RoGrK<7%ei!q2`_y$_vng_-<|Q_4+)dkjavL2<{&|T4YiIIn1@m#~UfMP+sM{gnyggVkxa0l`Vss6`rKs}PWgL@QT zrq>_KQhspeW`&aBwKIp#63mX3byPx4&Yu2z?w7es^>*_c%QJOF7f?1$?UCacC)n`2 z%YR))Co5OfU2>)b*KW9doEF@;fo>k{UcK$LIH5;&!bnZTksn~NGZ4xfY}A4S<22rS z-hfHKL*^(<1N{2z6-K4E)p!Yu;TO;}(XNc@a5Uxq2qrnd25Nx?&j-LWP$BL%o5y0| z4Pie5*pNCP5i%VT3)n*>L*hZMkmLS5;5AOAKm(8hr%i}HXr2on5)1mwB@@)d0pq6o z`*Gamy6CK)63z+{l>=^{F#SHROR~0dkb@#tBdC=;Tib(RLOZ95Y z*mU!qqF$VUzGjA+qlBhH(krkoRMB{TBl!`Ay@h}B0Hxh zrPjyY;7vT!!kC*RTbQPF0Ls85U6hCY`(5P27-D5fk@81YBWN|OKhz9PRYHm*eBzHHtx z8-+#5s*ta$*QKgMA#e$quE+tsGs-=&8wPh_snHjW9xG)We`a$CDi+^{H-h)Zy$t=U zWgGoI>#BivoZR^p%j6TzbwXBA$G=qQnS2dgC}Wy55`*#>M$*1ZX)tp?uRYHSt!_jd zrv%p@XoR2wuepnzgDA8&HZ$+Hby5th_`Bto<9~f7bXE%98W_NzO&O_8tM;wrTkmU7 z*G@#AF%f6-p3Spt*s-oVW8ttP&{1pNzx91_${7;NlI|?xRPy6Id=! zSMJ?rjPKvsw4}~nIoGL4y+2%6MWBDKL`79Fk!jlA59mrc^4^n_v1+@xKI&#s$WaSw zC}|)7K|P4g2yohzMBzd__H^YZYDZ^8n&!OyD1o<+WM5j3+otEZtaESg z<*BZ&Y*JH~mopfbVt+0!Q@6r17t7a{{4kfI7GLAMCM?Fckth4HZ8GL^&08s!2&;3N zs2Vx7lOkkGC6R_{6?t`EEbr7&d-ZJg zx+s&f_Fki&m*<>ck9}C_al1bzy3+3Peemuw3NtWtd|3e}Fj~1*gk78ECV#Yzz^6OzhYmXt1-KK}O~VgtY)U~McG@C98a__Cc_ zSiT(~Rfs3sMOg_H9l%}zy6)e^_KRo_AhPuu?}NfYLL7+TCD0GfyTLucB7{Ha9(x*V zMEnf02T%JZgF7L*-o+p?x31qDxQo}=yAS+^M;*J(F~XyO>E#IJ9wUx$HS%*|Cpqo; zxLw^igSfAG7YM`(h6SgKUlU!8+*PTTt%*)iZ&&8dv_fIDXHR+sCYjRDeva}t&92;w zS~Wj)GTIMhn4KkuyrPvuO0n0~{+!fghtdSayIEMPTafyleyA@cJw;7v0x2@Cg<2Og z2E6dv^vo8o%Q{LqQP@}7%;MjH!Ui2Bp8~}UzZ83fd@{Isx-z`U@^*2$C)~g_2ZGAf zm5=k(>sAUn<|dbY_)oxrs3HF++!;O}?z2I*q7{cigL%bgg~Y-grRT*h!^7piOUE23 zmOCzk4jhtKKI}xam(e;bNQ9{@%bYmIug$M$69`eF$dm@a;ZUiLFpN=++|y&HEP0i% zVf&8dibX*#*kr{O!Y`*PsSTnh@jA>p$~g0rgJ)rAlT7$-^X*HQ3V*kDP0XKKs%pOY zCw;LydL_HmuVZ_+H*>I1secV?7kLmouOXB+mep+{bXpkqMo;n*Oy?);&Z;!>o|gQw zLl8#ahSr!|ZXC1uq3F8>ZtG!Vl+6pK;&`98BeQw8r)Qp_at$>*#oT;IzN*4ZejszB zi)HYLa?6BS{ovy*J?hTg=Ua5@>RrjLNM^&WMdokDvuj!8Da!B7z$<d<^! z*C_EtrSHNSStTfGNK9cERx-AvRHpW;d0Dv~o<4A`@s|51+M9j%q?xs5*7<0o^-$Ky zXwn)Fef?O@iVnp;fa{9W+H-I91*gSOjP<1I*j1-L1AHy!<`JFGPXhXkj-C{8?b!>4 zq#m7xE|D~dUQ^FZZkeG_Z%f&h$;F<9GwG(^FUVDdnIMNn8>7t$(f_m1v{0Q=u9gZ0x6+;y`} z+16iLWqVk*E}i`&7LKe7vXf@0-FEBo?~dvnV$+H)Qr+U0RNX(02rpZDR8DHF2Y3d~ zRnQFZ+cPuNN}SGAJQ?LxGYVrcd_t?V&eF{9I_`4&fIA(AAfljoI~xu+&?z((Tm~xl zB!CmZduSXuk7L`T3FHRkc|8M|K)>fB&;hXHrzACg6)D{~TKIyd`#8ILASX zzmn6?@EzL`^pE+ps3+%UQb%rsN!t+aT6Jk9{lnWsW1Hm4mrVmd$$GDHhUn|^uapO0 z&Yrv%)nQU=enm7=tk|i)6~A?i6-3a1o+vx=SYsip#s58<85?SNLF4!m+3FXfYFXb` z*FcnVGFru$9mHH9XlAy>-*MP(i4ifi=dD9)piZ6)WAyI(OqR1=JS^F6W8HdUcQcRW z^f2j$_h!Ho={t?|6L$x8nyI!o?^E8;Ki-?%8e)8URD4Z`K5}5b<4=!z7=GK7-v7Aq zV2fIKD}=dE&wh0O;5Hq8k9Jj*jyvBPRln(5G!mam|({|zcuOkZPRQ!9v8eRxS8oiW!z`(c=#}RS;jat1GY8n z?Zg81u6gg!CwHEEThJOePxx>$kUP+zX2$&Xj$b+b$0n30L@Qug_!8G2Qbe!~%Y|z= zuaSkm)eY~B8Pt_?grb4NQ@m~ux}ry{-Q_#MqwT007Yrv~x%BkG=WN~I4{t3dpsx(N zU5@c;?VgxVK`S<#ZE-~^d;O8v7C5aL&aO4U{QoXAdjI%KfD!Z`TB`j+lOzAo?C(EB z{-2rVGz6Lj02d#KI*1F^0Dc9EKpTS(0gpT(z!p&GvdZSC0WMG3%L!iTY>qL_%NisO zf_RAl=fMQbC-70wBg_L11SAt%$>GK=;w1O{8oZSd+Ga{U!`}VL^b&clhszV8l zx3H-+K%6~~DD`&WA8rrHDF_-+>R$Rk02Z{{S#AkoCk5E68 z`v+;R*^qb5?X@VH?ntPBF<>tVr#cf1j3g-#bc*_e)^4<3tJ#!(QV(5D(bhhz@uF8L)(Z@3uRqnW02X(rWA* z9iP5*MrS5&wdo;$bL@P{&6RT33Bj$=Q||}5>3XHQ0|l(LJbJ@_*qn$N+j#~{RT=ii~ouGjwFNjz;tt$*>JCp z+01x+@PfI>Al=6^FEe5fUTrTjo;}pQ@qu~cQT5%6wDMbjc9dDwPmew9q7~5g=l!T1 zae&JS`u#fpINA=VB>srqwtuQ)pvQKTr-ADYmaO(4t?NraVHKM1ddy|7s!7zSiK#1p zEf78|q)<5y)VJD;QPi#<9MxNEXC?-vE!ENxzCl-_*Ip4Jm(!L?@wXS`uW;f9m)BNx ze1zA}kzZl)Cf*8M{EWp!j-

    ^Ib z^fU54h2Z5u`9?8!A0t~(h}d3A2_+o6OhwTZJnm3OSPGaGYB-|`cZ8};o5gHW>KU~@ zu~Z>OJN66Z8_fkvqSVs^F@4lRx)Am*^&$)K^`oJ-L__;%l3Npzbm}!$S40E3i6Iku zWX+$V7AUdkvo=F~Jzu@l;kP!ce`TG>IYGJn3^z9Xa-QHN)!I|GV{eeI>cXcQN@{mI z3^mN0aqot*Qfa6VHO=@8+oy_`BaRqKN#73fQ=Skj!N*I?3)wlp;}hqOv2ABhU6V}w z|21%jyZuZ5(DDb{L+_GpD|i;#NFenMDgy9W ze-2T0R}zMla(KGB11(@v+&pI;C*bpqmy=(TAS8$o;zi-OH+kIA>YP6yoS1BG4A)q| zV=*h?nkcN&u9Q;BxZb4laPAccnuc2TUE8A?mt$Wb_LWvbca;;Q>A_73HJ``@X}0pA@6_~!&&e)uw?)Sy#hjwIl$LJa^_^PCUC(%5-bRocB$gW zaJIUU1(Uhuand}OxwU;_MfLcAFmsM?*rcl*G)b=&!o*K zcB{8E{{!CSpqjFPVSvy09!MLw3sVBs0!cdecpq_Op0EkjQXo$>-aK()cj?(Z)amLT zBDEnZtB-3pE;*ywmOKZ*Im8w)NGFi^o6r^R@?`L+>Fr51yTT5JvgE^Nlhr^osT zke!%MeSTA1n4v@{Rl~RounYcBo3S);DM~P(~1kx!9tb$+^#fQ!cU{ahJlYVB@1eRK0Ev=N5b#!^- zEaPy*HF6CTbi9k4#!wG>L?+Wd_-c|do3_3IRNL(i{|w4g=A!Q->I>H6fJkaL^FiPf z$|rhni15Z^%C&%Jt9vUfzscp&`5E7~OFhHIKAraMy!s~01kHt$G(j#*bf;r~_h zo&?OPjUUU+W!(C&X0Tkqd&)Y#(#` zah%r^0jC2f{UG28prw}rN?|7yKjiQP8EQL%RDl#jH6RI4b`0loA-l$n#RZS->5({>lee!FGt!lviF zCU+v|p7@z;6)Yx)@oZ`=iG)WmZB}o_Mbp1ta*J7Js7&ibBN)U*+dNGMfz{kgX87%0 zo$q9n-;N?1vJ~!Sv&`xETkG^<26if}H-Ag)_%!x9%h~m#ZPd~QO_b@0F{F(!P2E4x&oOU!wb53Xxws;lC*u!h zlD@&hdl}Ncvpg}Dv^FLf`-zTX&R`+5TTFLcGi{i0gD_9i-{khWNtf6(A*#_YY-$oI z^pwp(e`zX)mElLHK4GN$+@oBjXAn%NaK>?84+@T<8*rN4{ig##y;4DiIv?2#RlL>}9dh&je<-U}2B#RF1R9 zdG#fq0{IuhO?IEyE{H|u|5tzL|9{G0$X0&Aj6 zg28+T?jBsvxf;b$Hg1~?}`rox4d*=f>6L?K%Pc#i3 z0omeZtMbL7rGz#{j8IzHRI2%^CZ1vI9HD(;i{W)w-)gH6qo;S1tfGO=Fb~_)5@%?%YVB>wrk^l67zQE ze4nD)nB!KR#(JwM+S8iV8`e6}nhX}kAY4msE74G0r|&A#C|?&g_RN?^M|Vu|6o-Dw zirliSv*V1-fVY{{?8@knS;DF}O^JY87i7i+i;~M&=H5HxK~^h9lp?SaZgE)(ZYBQ(_B?w_^xww&Cv6eYYh2 z(rE)*=X{%K^IKRSYx?2Mw*+B2c{9@YJWXm79&&=l%T)DMqr#ZZ-ey!T=4rn>6nBQI z?>tqKp%5TWxx#Yue@!8<5(5xq4Q6W4J{x6%C&;0!!jM8rHuGIr*~U8k#Zm4J0!!;? z>FNR9^(ET3ASrK3Gr3MvZE7lo*OG%;#JP5npys-dWP6J{-L{mDRx(a zJvJ-Z!4!WtFc@^+=?C;Z^s++(%mbEc^Fg6I4mK8w{yXN|{)VVRb@u*N=C3GlPgKXN z47;scv7n50DuPZZ$2shW&O*Um%PaT_XhE;F>KdBiPI|K&P9{YmT=gw7Bgu*IjKgEr z`_W4|7f4mc_mis-KXq#YMH`c}ckReuu}h`R>;PbA$WC%Q>?WiX7YKzx4&y&TJR#wzUkcjK@kX|tI;6|U8mgJ;SxmuHmzfA}Ji#H~$IZ}}P3y3gbPDMf)^wr|KZCzJeweZn zcaGs>wiU;wX=8mcrK9tRFx0NGDC8bw%Sb!X9uqPGBWhqijYL^G8DW z7d9uli}qw$`6wFV#TdFU1l_im$fDV&SU5(?q+o=YLrgKI7j=)LsDHp55bq&c;I{Rt znf-;E>^NCCjCnY5Z`j=~wmYDF3EMElYZF_TvmqiufCiJte{i6c{aMuM-^%TjWC!56 z;ZlNM6%Zkd2$})k%Dn?a!5aCdfFhpxoI}tD-U`|Kkmr0g>GA<8-%q;!z;m!b_{q%> zoDl4DW%4ZrB`$yS1;S0PulR3-N8DEmTtx1B z9XKZ>c%KEoiDLbJgHGc00h++DXfdFa>nD^390FoQb|Ek@Lb58-0GJjThCBxPh4Vq( zT)vpfd9ob4iFu^I+`}{76$_YYHD^M6wtndJc-+AUd1f z%+V3lr2DbY3$CP(v3hyylI>@obLV2`m@hbzC?4C0hmTzg)QSFydkel3BjP9dDk4fO zn_a^k3%@?PyY-521t++FrQ+LoIXc)ni_vaUA^IuMmgAL3cO5C+a$po6< za9DW@G|}-n41iki=z_e5v~RP3C@ZY9ilWD^r7H#2pmfcN25V7XZ}SGif!*9*w*se> z?m|<`RZ$8+Y6oep%p5f#8Q{``u*$~I5{_Xc1{RTBdeJ(od~;WYtxVc|M7>|-@s7b2 z+A0TjJXT6lp0PWk{0N$4H>LVSX^&-*+AU>AOHG&%I&A9)qd9x7L2pc1Rxi zsluQ4An#TB2#dn*hCYF*q35AzAf8xHg-@%C4^ZfGI)(?yfxJh5R#blnqRkbzn1=kK zpvtI9MO<4${{%#VfwZ+wQTGkq8V-$tC~u8c*m3ek5hNWFq4n_3Gg;&OhZ-n$@gUlJ zIO@OD!7@*zWYdGu2K&qCc%kc#FW4>Ok9Mwj1kb@H79YrZNBNA7Vy05GFs+j(OdWA! zA@JiD(K1_k7aaEFTv!v0%}I-#ig*Q%yuMIxGSRzZgaoF9M3DNo3$X z$L1{VKSA#}C~%#+E&w_2%G{y>a>+#6nm6#$P7*t`qtb zCWPLPCKm9!Ln_9##;>Vqh`Cftir-3YK?Xyx;Wm3=8E)FV{AXl;d)d^kG{#k+pPB(kA{t|o?AQy zLRunBHv?I7!cZ^PJHdTF7S~Dw58ex0ll4S@1>eh$1aAPda7_G9L<|@!*&O}>v=b*rIdC6|v;%K(uM77FpXKfsJqZ8J zC5hz%rlUG>p#0_P!?EB)pqC(CM$(ECr?CWAu{&9A<$m_@>c9cNr zU@qI1FG{<_5en#8mh4GEZPps*UN9j;(Mb#3e(2#$7jP@xh*cqUN}T|fWM48z*cZ5s zNyHvfU6xnkiIf9l!*y&Gp0OfV{2i+ukb3X{XPSaTvk*xw5-z<38`ddNoVE(lnMdvjV-eXS8d>S~m`DW(Lk} zFw|)X+O=-Q`t80-nigyOytivqt=Z`xrped3abRg>+nS7hY3gyBa@PjsAFAR#!7FN1 zKI|$~ex;tZvlW`D6MfW#L00Df+0MK zHcEoRmxjY}T1bsy28M<78@YntiMTg(8x2Dw50|2knUoJNVw+3~M(Z&W#5>v^tOF9q z5E68d7suBVb1+e~e%xL(ay*yv73V$aU^z;_OspmSz!2$P6gaV+af6aUxJOGjE5Yxh ztB}U=ml&P|UHpxaVX`mLd<02xB<7EHD*V_BqbG@{u z^d&hHp3VLwOGry>FY+gX4xs3*izo0MoVOB=^G!379r^{MhoA0q=6v>z+;)boXXQyo zcKn9_!cJT*!1w9M8!q5JZ+>@Jh(xWm9)VG>pF>xt^bqitfHiD<~c2QaUd-9h-rUF%2 zypKpQD$Vxo6Ie?;yeNVtX}m`hpD4!eYvF&CJn>HAU6plv3wgh!a6ebjKzvZ4<7tv} z{si7x*;I%hN`7iexYW4hY3Xsh7AjV(lOpa7-c&I|!7By&_J4?&34S zP`Mv<>Vr=ANIavYh{qP|LX7F+65o6L%lzPgsgekTXoC7c8DAMI~BC!{%b zU)VJg$%RJtBQdkwkv%D{uV~;r7X7G-;)IF&&-2;7;(;@p**uX)Q9C40gE zH<)hFi-=oOv-(~@y9WQS6RrU&S}JBvSxNy)C5~HRdmzi!?h1u-H2;Ix03nzDq4@ti zUd(^7Gi2bngt9=OhljC9cx`tM+8I&aor0-Fp6S_(IflvT zzlXkwbQzezSYiZ&`Gl=Fr=bfZf86__c>D_-eCPw^CXq7s%_5xS$#AgpCrwVQBi+GW zo4iUqW@I3vw3I659Cf3)>=#`1A8yBY6DRa$>+?ewyrPKruf;=I$5AbCa(0z6V~E^!c;_ zza+o?GI`Z9KYul_N}3-q%UdPh=(`34q$+_30FdqobK!YN--Yc5+oVHLQ$Vgf|M+zv zPI|dyC6_6p23vv0Wj4_*z$3}0SS@g`WNmaGSS%imYy}F$t5XWOx(%j`kDhrAR}H3;S|bNH@36)iizh{m~VuJh3?D^LQbh--&<^cg*v-WqSaN$ zB+HwJOj(G96ZD6yy^E}=0M_4&%Z#CU@IH=vY4I>q0nv7kAI%zVTize*Ok+ zk-bA6M*Wu~nqvXittAFNB`fsPjHtyY;J1;(Wx=QlgjwlIM2(SJSqyxKQO5-oVhVA% zUK@W2Jzh^CFQ5vWHAt_J!j`o}4I;lg41eFYgj!B{hqIi3+I%5oF(zy_;vY{~Z-0ez zpjX?rpuMNwZ;QozVH<2KzOgR`reD$$T9@tuLw9*Vbxn%4pF3cU^Mw=!PZjRcZM3dFwVD zd7;bRaO?sa!P~OXRY#aHd@|5PVjDZRW*8jRUwh;GmO|aA?sCJrtp|s=cum8)kpaRL zxOlXe*oi0{&mufP_0Za|M#!HuYuqC8;NX7b8WY;^ca(~WeCRUr4dS06j!CPDbDt^v z2wd3fZ{msgp|G=0khCFf)GI{6IXkUS+QN3I!9OPAHUmT`GNyHn(Mr@{yQcAO#Kx`@ z@NCrP&K8s_Qrb~~-i&VRDS=0#@qK?|Phx6@#<8C<;^8RlDQwJ07d8nqPjAIF5qc-o zuo(0H85Ifw_m$OanoaQGdRQ{Zu|nd`zbG4p(T+b&4-3ovQ^-d_pBCq=K){C`epM(m z20vfd;WSYpbw_}gEnVsLY*PErH1nJ)2xP^TqkZs0t5Q1>#)7;~^|cRebTye-J^sS# zIB-mA?QH_&NcRSO1LX3`@H{|1ryS!86v_XIQ3XHE+a;{$WzVx=q@$F5LbN+~vgGKQ0~u>K-l1egoSc zm5P?R;>Rfh3ODyr4xj~SJv3((0lg0zS#|s!kMb39Cdp$(9UlMaqg2ry-uMH6uLEe_ z1KH)gH4j#C(gEAL3UtX-0bE}4SX zwdb*h=2WRSnE3h02~*~|yZsDf7Js_r*mAKhZd?ym*t2n77g7Gepv~au`5JhI5xwpU zPJlSjbd;QlSiG^yrW(_CaTtp*Q9E(fU_^KLoD*EzT zbj6|)u{;=P{S#d{Ofy?X{TLiD%g4l0cUs&>ogPWIFh%W|WLn{nRnxz%o*`({`DSO} z*JnPOzd=eE_s#Yqjxqd*H;rG@w-8>L9Gv)z5(!@f&}IdwPjgLs;P|S=u$UflqfBxT zX5JyTDz2u8xg)13R*}=Y_dmhA4L>FBhS&6JBWsORhM!V;5a`i&K+eP;@ zizaNKFB2QE*3<+-3mP%76YYjv=vfc1MFqC$n!JM3+qM~7!b7@pP@PEBKow>TmC$Pe zkAx33hoEnuzI6%_3<|8}=T@;X(D}i*1$nc5l?fF-))@#NMS1qvAjeTVd)6S&p*{}; zAupryhECzru{%eV@V&UzW0S->>`z)OHUZ}_c?9zsgPv~17h=v$ZzS5_u&hGMl|*OW zR|hTfE5VmNK4cqF*nuzRbl%g#nSGh8_^UO?t}*A^-HY$`RaKfq5@*$K71A@9T74DA zlgIO}zK(P#S&ysMrkD4ZsGF^AV~hoOHq_s)cD9M@|ErB?x(ZBDtT+9+?&2+eBfvYU zUML^zlET7Ez+3W#;1+(+oKM6fnt@je(HQ5@hC&-0cD{C|V?l2YG!o}W11x1853>GOZ9kSq?= z0cS;*B1!>!(X)heK!LO-n+t4}Z@icf1k4S0T;$XXKV(L6GDYU0p`3lfdzog65%!_u z9AgnGubNXN-`uf@^Gg10B!k0~6*V_n- zz>X)$qO*L}r*V87ux9Dj%mQo8?IT0slL}qE_GUDims)vwV8hJKlf8ox(;xEMhrp?K z*?g+glu6#TF<-Xt$@LQ=FtO~)#Bct}bN4163b$2H%mj*NFY7W@B;T%>v;7uqJMVJy z?vciK^Ux3Y)1Sc3r7ZR*AmV-(GnMOg8#D482)geuYYF~ZI?llXUJtfTbhF)V@p>|6 z=Oy~(Nes^D-uSTdN)9PxYMBPw33sAohoKauQMgb0qM>v2l3KF%Iln?^mFAuhm?lxZ zDo;~aS;x0B3ccM}W!K0?X)OIf9P+rLZa^tR#@G@xD9@^#3Jej@+`igZ3j-9 z*P?Cu@+f9#y}_NPY}A^*C^HYl!@&^J6%+fOYWx->rX(LGG) z^TZ!EE9`7RCLj!Z?xH`T^LxBdnrM38N1Pf4=x@gTi|wKs5yd#;;c8MB@ynRd!j!aP zbijO;czDc`oJkm^KOsqRV^e%nTcXaCnyDLJ%*wI)O&sDMvh%`Q@)=Mv7lc?3~_B6nz$C{htiB}rz2$`#%w82N_hB0K84gTGl; zAE3(HEmsbugRHswXcBltrXJc0UXbVoMFO3Y$>2-e5-B$H1>htc3||74gjanrK#P#& z`I+-oaM{ZVun<~!)N%bq49_-TQdH~{2QG=T0|tS2LZ{Gg+z(>4gj7&lLOgtk8zMcI z=fa(luc&zgKAXGW@(Mso)bb8+Iz*n~O6(`%j{Gxh6;bdhM|QQuxyqNj@3zON8;HA8 z&iu})kgK-Xu}QLPwVLdXdC#lU?4;YVgTDZ?JF5n)*=H7yx4jb)D<~0Lbwe@ zmg74(U`ZmQnZr6>Gj@r&BDZa9{p?t-?FfHreX4wLkl_|nLw(3N6w@)pU|(d+{BnTx@h*^g{j8)t+jd&6!`z*F@8A2);vDAoz&&#{oLj%1l{e10f5MuEQSU9WR7OjC_ffv1l&Db_Qq*_q0NDcZ zv45Fj1kdhO#viAQ1WzzjZKtCmjXZmHp|}WK_bBEBdTn1P0g4VDKw!%;sUt49 z7|gR#G9d~VL_1IVhfp!7Om4y-&)-1#NYIS;c0XnD?cDcP`;;5QZDk*meh>VM4p%@B z=Mu6AmLmjQ9q#UEDBd0ad01?A4=Wjknac1s^l@`N;(Pj5D?bu%3}GrIts5&ggA!ga zZd>vR|4vJ+ZV+u|9nENjdC+U;8d8ezi5r1@P#h8JO&R2WYWx~+$9jFSF&&|Zjs8sy zVE^JqG?S@!rk-9ZYwntyJ&&XI@c*v+F@AH=x5ww`h4`IF^r4!Zv-rSfL34xS-M+%k z1N+r!-}{=4ncIDm>(BX@cJb@LJj#Fau)d z&PP862jy-NV?4N|Blx3YEqObq2U>;e{Gs3$q1X=&t`%-mWIcTl z{@U*WZWEvK#&TIA1D_~vrEq7^-<(!qR;nsDPYTIB491F|<+^a+i+AOH<+Mw`Ubx8J zFW+(H2`5?n@+3~NWAiPwj~yibk|$uNh;mPyVzb5GMco@n+(q@VPPS4hcPx+j{n+v- zYSt#Fc*J0)J=bC6CF@+_8=4Dnpg4D2hhKkId3>u7QCZ1&Dy~15KE5Q?yqGp=Ep5LT zKN%&vS95q;ym+@ZpB;P0y#6kG@=iis!ZTmi!{jj}nnO@|r zZ;FJT&CstgI9*$gKLh`I17^M-!ylNkMiW_MpLST2)fr3nRFZtGVLO(zhFWL+1+O|p zw>pXM8ML!T;C~M=c3vec3Vb2L3glL0|8GZ<&Ei>5CyBM@Dq&;OF4I zo#TWvaKo-d!aI|u-gf+PlkuJ(iZy2Ku&4QYlfx4{yHunt^UQPq) z?;$y8)xPbdCR|&_89dFXGfud_+RCTGw-g!otuCi?XL@RnQKGk#Uf&OtH&Utp6IqX_ zHguBQgZM9QiOo<%b0 z<@g5keMI_fo829XjK^|wHyz-=3{W-wA<|4`+q?ir>S+6QxJB~p(MHa*N#$0%amz-h zxM#Fcx#{4Ku}Ha?`hv<4AM3g?#+UtUyLc2E;R7GfoymPkQLE@KOEDiA8=znHwU{D} z8ryx~9T60|1aPr}(*bg>v#>6h1;mMa_g~@#NVmF|00PlRpI_WC$vs~;PZ=Zz=ux5;CT{8bK|hv7?^l`xvdII-r~UKLgMqU{1t$kv+4Lf_ z{?D9W#Rmo#xChHN57lw0MPEm9d7kB(j66X{wd433QGU(0iE&Y0z5V1Nv0KB_iI3vO zCe9Q~7S-l5)jLn<2Br%ZUiM2S=NByow5FaeeCscmJ|SoKs7)rxp0xW;4$0OuubLW@ z*4?n3s+HHY!>2vxmT&w!{c+CV#+|8Z+09nm#D4ku>(3?$GEPgvI8OY%dH48$_`&sn zNll4MW6NZb1amJlQSnB>yI7E%{~{<4j! zka?G87gWPelr)UMW^WH=R^4yf+%%qHf5ERW@yPRQh7-pVKDBOPq{NWv<25f`rbhPc zXu7+6HV$7~vg5Ed{c)NT?9E2q0tXt-i}oy9vMftF)QChIcZSuB#x zS)$#eW)HbGZbwYNf}jtQ^g!^l@E?11P}E3uJ^@^xTi1r+5f;m4-i~UHC7+z8KAdyz zaimqwj}BK*OBW`)lZLwacGqGcf51|e6x-%dh$6!k3jH7cl7ff*$16c#IDbXwm;WuJ z5QZvx)cz+AQ}8Pl(QHN7S|Jk()%p{wS0JpyaH&x3|B+EhLO1*muRxfB>ii!WI#l=n zniKsW|7R{Jl>FbE_7E6e1?v6ZxZ*qD6_H29Yt5e{GcFQu8iglYL=v(RV*d*ODCXA7 zQN#dWKp_795Xd1w0RyYZlj(1VKtvlMkk_RUsMUa|Zjo1T$7K}ll^(Y9G zb{PU)RD(c2h5h|ZXtm2*O5k#m-WKxB*qHW?uya!$rMfepsS1cS**j=nKUZ`b6;DlyH)rw>=kg~;d6VH(VmK|+p5D{Q zvy{h$DtVsrI7=zdlOJVntmiB(l*$%rcb4l8mz$1O+D=xx6{|g}m44M)k816ic4I)l z``)-eV%-01Iv6t@OkW%={5V|sd9?ELaQWxa!sXGo%Y%uFgRkd@-!2cQejH7GKc2cg zoVeVdyf~OR+Z#XI8$CN1195&Z`u%X~-%iK=P`=O}Rtzi!M!vvd`tXD|B+4+|cbXBj zMvvHI#_cf^_Gl41j`uh?0tKV0sVFZU`JpPA9FK2dMH)B&ysBc_AVv!jXgqi^Sjvw-CV z;I#ivzuT|a>NwqMIN5AG-e^DF>``w&*X_MB?7cSay#wEHelU1>F!cNJr#}=Q|4WGjfj+xrN(j!)Bp=@D*b4pCqP%{k78UtrQT`f~_TXs{cdg`_pGbT3@ z$BsEImni(SC+dqgb{d77#ZzW+gl{;)9Fe$6B&<=HOK4h6VEUs+k6%>J4#$)(;EBt0 z<_eXyMy1Qh^koutk;dAf`))JLM0c6~2MoVGpO6!Fik6+N53VxuKWa8FRZ|D5N1ylB zF1Ob&x8_Xi)0f*2S^6w+^l{?iV!-oHJ|l~Kqc+p1&O6iGJJV!dXtOVLg_qj<-!+97 z8t@|EU3ji4GN=Jjo&?L4c_iuSoCu|^%L25njW~w z2wL&stWo`zC_ZyE-zBpD64iH=8n{dfS|Rx_5_}ek{xUpJDr*HpTSQYA(3Dv;Wgbmk z#xS>V>|+8)MUL0f^NoypV@SWIa$faTt^9nhdnD6`4qlQ%mOb2uym4RAW~D9=$qOXf z5}C3>rfyK_n{?(jjkQYiY4J~eR5|sg{K-0=v`VM1QK=g=+9t(!gT~%u`0g?TcNpv~ zI*5QhM&L2s_k=V3QUhi_0b7+J@Z{%V^kIzmEbBhD4UJSnM>uych$s&YWll!?WaQa<8XGp&DB*r|6xj<$w1D2$KWpdyu-hYkc zze4g`A^I#4*sFNoB`k9lMO{FV7ci7LGQAP9$wQJ#wy8go5`{28}r9h-uDt_(@0q&dOf`6^dUvjV zU{c*bQW_5V_<|5Ba)hx+tSwdOCK;a_^wUpn2NTJR7k|J0uRp;7;vdiSSF_FXxCb~<@} zI)8Th?d(+c{dE6_eD~kv9Y+dxYLB~fySMjqH0~{)`Vr6iLJt0lArH8FcVV%w3DiL% z?K7S>hNn%?X_JxESt4zY!ki_u<_Ufacys*X8njCE-5~p}0?88nHV6TS_`qYF?-9Z8 z1n;|tVeDe*J2;k!+#-=Q!NSjBJiih!b2#ibB5syQSojqy6xtdEXqT}~ zrEHVP2V~k2g>l62KV?PgSP2HdOe42l*D-q9`|b4Z%cY&aopdb8?|#{XZaBTWb^AT7 z`c>@yc7je_aG@&vu6g)FQ~E<){F|oicWwDkZPnlOr9buee$(Ckq0hP0=UnKrE_4Fm zs?Ic7farx5)Zk2$`3j_5c%i+2uIao~_nxcsjH(A0nqp9)L1H&)DotvMK~)b5?WJn$ zLiz4OHF}|ZV^XvkPWuh=5tDrG>}2gyzWdwh;m_0E-xWJQ6B}FgzH@D2?Pr^71-I-fogAcI z-p$^gZD_Av0__1rqjCLs{96)jgvc5pFee!FNe*qE>La5E@6&?zsA2mg&JH>B zh!U!xgq%`1a#HXi!G9a)vyNdbqG{9axDjWM?psb3x9qBJJJi@aR@}C)a&&KW!@ot* z=P=9_Pwy#rw<%B5Jc=sA(KqmnO(K1dK;9-$x3TzDEMWsrSi@pvINTB*yGWpH;E8Jv zw_antzY*}$MAQ@x^NoO;BLI6voFU=N!X;B=6v{f8vO%Zr_>uRitYbR+log<2g&Ww> z23EE~GO78ZP>*X3!!o7ltEOs30Xfk|U8$e!2z9}-jqFQp-np48Fu*{a_kU{2erl?J zY9Ia7Kl)97|A!&>yFTMWFFe=t&h%;L2CfOv)eA1P!gHO_WR`3`kn)-4&Y7m&eV5J>O7OC=uB5+)D#<3r6yI~nX3Iv)o`Y2G%3YKRk=YSGM?5OxI9 z#VN?xGvAdT&y_&j&rHgfCdDh0>a9r$oOX{<*=q#JR?%xvwCGM7b@CR&N%MuW@j_d^ zf0FUy8!fuY)-u(?A_HlWV`(9@wiZ|-`Buo3>(|rmZsgk8-FI`ZLV49ytUMJTUN5|?LH}BeB$+5IdMj&D#coYN$L69E= zu^@;BL1YLbK#(^CIf7mT4*6cYR_Ww6>Oqou;nuwgYbf#>mb!^&Y~!fgc+wVuyhfmH zNdtKmjFW3u-I71~Os*7s z2S!(scLqeJ&b!p+f7jf*RNpmMS#5zi*#drA-kB!ds7*8IQqS}$Mt!P5mwcwVqi!`R8jT8xUQw+FR~5JsY2;GPNwwy<%5W;a)Rd_d{NV+5 zW~YODE*y%6APyWJk3jO^utW$J2|)o66bgr8t&nk7ZMj#k@Esg-T%GSYIp*5i<=S1% zym=-4*46Br*D|l#aIKKZmKF&%$QT4H0)he|DEQZJ_x}ab2ZFI7WB>&7fglioC>4Sz zzix04s*z0q0YV3=3Hv>%v`mZ7rM-IU9wS=tk)#zb;$;Oib0=f)W;ijsRnJjNzXNC1fT^n zYO_IK`>UzVH=3aq0D}!e4;~s-flgIuQ03}XMS5kiLGjS2C^aZcj4E)gGAP7)1waKt zWK`4x1sefNrAV(R*PcF9%kQgBi?xbJCUuEP`_QN>k}EQ%H#rq=T&efrP&fp!fs$bG zNEjjphKz#20buZA2)H8PNl17s912EQgjrZ8-E_$I#)>iIYHxC>qsP5#*M*ig@s<|h zNJKac8G^71L0SjE;QlZ;2Z9GdupkJ|f+JXP7zKinAUFW|KQbjj5C|YvA_RGvxx#)0 zm;p1u4+Pa`pXz%+^*;b5fbPFb z11uTaz*|viYebN-y=E}(vpA1Myw@Vuc@FCZO79W|vxddXaD)vqW0&c-%M3WBuuh4@ zV+!$vj61=j_X#K^kum|X`j=ymjss>l0++S~nv(+kX{JHRH7Ik=Rr%+toC}TcT%CEY z&N|nER+VScq!@K+I!&@po1)Wl_1YApHp!^v=>btaK$~vVfrbZg%`^eStj#uR?*N0X z*MOclN3YJ-sd9DdT)-6o)+-D3$~y+-J%j3=PI2F$xUZEz)XIx>ry$C;C*>M>iRQFe zbyBR67weVx&$RbVrkp)h((r0X!zW5+moxQ&m1WW|Jpp(za6~E$o(hA-!a=Hp0i6ZG zpim2BqNPnL(jplNi-p0WkQOmlZt)yF?s(zLaI6|qP#uQZ;Eu0waLxr>E#SULD}SUV z8wLlD2piypU_g<8A`u3sz`_55+zV%dFTo%NxQCg)1YQJavF3nzKrk@&ae~2JVQ_E{ zGV=|ye34|^8wvJq)oAj20??2 z)PN2D#Py&gnSbg|aPDr@gZ;$Xlbqg@J1-RvKPv0T)unH>84_dCg9{c%PbSMj5Xq-x znu^LWQQ1q7&&#D`-D%w3ewb`4{`ja+rvUGDxAF07+DC7S|HpU5MY9#(+ITcES)+}r^?f+3U$hS zog!CzDpbj{RC1x>IA3{uM|FG$T$M+6G$;3Tr=><^$(geFQd@jsxU14;EboPPO%PLC zZh8n2(Ense@P>kSKLmz|fWraZGzdz8!4u)IR5&6ULWBXmA}zVsujgOAm1TP^3sgs& zt0^}e1h+j4T=9>v{xyUE2_din1d3Vbj;nESzI(-%3&H3R3@~FuFkc7)2+dF-hz>!% z2qXux2t!y$z!4EJplp~g34hz8if<**~{m-yXSZ1mm<|=)zL-e;rR>W z+4S$G=}W_uLAUEFDl&_Izg16qF6zWw%Fo@8r1o~g&2%RQPr%u&r(*Z5Lny1t74H`f? zRi{bOs`=nWohDtU29X8kRzQ~q6~GCUnr~3wH)tN}6eW6PflisFRe^+`d#29TgDkB9 zUoF(C^VG_m6M6Q|QRc#S^82}<+V@0WgCix^@=ENl3im(i34~xAkZIwFL>Md%f+ry0 zDIn7#5J|RIQY|e~;P7Ni8~!!>LOYidXH=E5$0K{^J6CUH-gL`#Lf>`4Jo2Jc;e92f z04XV~kr2{K2x%b%H+bTzuiX+NtimCAES0KXT^hGrj>bPXSZaAG)e;_0R39!;-l&Un9Dp{rG ztCW0|DpjingC{_drvbWD@pWpxM$H4?tW{?lfD_g{0%K%@rbwsE1L~CT=N#?`4>!~I z*V1+tBlhcNwSwxD^fz9uC1k z)r^Cn1PGQ2L+}yEG&q!qv`D{VExdM3U~Lr-Qm&;H@1}j8vv(dDdVjD&V_R5Ov&R&A(zNw7HgY1)#l|WNVvbZ43VBFa)T<=D(gF1j8b1=$?5crGHy}_UBQV z`m5yP+XLlCPH($gOd?8(!qHy*YX-Z~>&iA3oujYGD@Astf%Z%;w z2DRy_!SL2(82xTo_`81jZ~DdG4cmVjjQ?%=@t=m@|I7I2|9$o!|CdR1p)RUW#@*3H z@J$Ji&V-^%|FAO_5GzGT!5@0s^+M4@OQnC)-ZPvQ=;Q_3lN{xt;9xg-eLG=kJ!)|) ze)}**p#*j}>r$TyTAFi18YrS?My}DAYS8ly`V5mU^SdGA0!$w@1?RdP(C`>_prGgnXDf^4uy}9I_$*7SJR~@;(EG2kr%ysLR{{$?7 z5sijGMMNgR;NVG5hM-h4OLK5xFu*bm2InCWJS%_}o`ygQY^^e^k%<<_1lz0Gx10;y z(T~u+^|Z8J-@;eE+0U^-ohXI~#jeD0YEXXFgpgWNNF6y$LWyo6Mz&C*+Gt7bw8T!l zf1|gr#Lgoh2Ff!Wp`r|NvlOhNtU{DrgXQ)9ngzy62u_@74AzZ=j0%V7Eso&Ha~IsRRD_NVUmzx4n3 zm*M;m&0qg**wJbdD%Dkkx;s7RdD64Q)H5p0K*1g1+`gjh-+J10K*_^%;@`Dp26?#w zxJ`Mk>Nw-{fV;mNyRsHEGRx{4r`3+pYbTj?<34Ru{{2${&!+sJPX-MwgwL)gu5G2P zZN<&3CeE&=&a9+N&Bu;RMt&HJ{O~Ds_z3-3~+@*8E}XXg9(sufd!Od zfe=_B`Id-GE2O~2GS?E3WQk0>ay{F@^}Z{%673^pB=`CjyzsyGDj@GEC9IVgScCHw z;R8fCj))LiN{Xx|M%U1i>dEo-)T9P>W;a979VqN!^Lt6*?Kam_tgodYtrK8Yan@J4 z);BV*+hyCk72k5nw{yQ^=UNEr^fkxy>$mtew|O_51UK!|EUtitifv&R6bq@A0E6D%yiT8i^)Z$tlVZYm|TV&v9gZ*%2a_J#)vPbjCEa~ zTC?`M?(8q)-~P+^^Do1{{g?6lA6oU_)uumnKmMgZ|EKnkzqJ4SPp#qa>VN)A`~6RC z*`T(#-N-Mx3=FuSqEGN1(-_AA)a|!urwOe4J1FzxM#~?nmb25g^V2%xNu}=Sf#x7v zzRy3{j$U02{5(Ud9dVC;<3R1Z>DXe6sQUFT2V8N=cVLS=qw2k4YF$IBNX2dRvNn26 zGrg&U-P6r^|2%B!edO9i+}={s@k;9PGVf@f4?@1gS8ejNI|AL7K)WGSt!8NEy%WSB zkHO)5*e`fUST+m-kqZKXP!fWxwo@N6qsrVTvD8lGv5;9DVhww75o z7JMs<#A{bG?Hmf-(2u-{<+S+5fc(CI(pN!cFWK3B)aWK!L@hZ&Obo6f#@3SK#ni-F z8n= ze2;OP#Cgu+y;lgR5vcO>>FmE$Ge1?|epgQat^hIho4ikdlyk5hyRsTGv*h>o8(uW- znK|SZ^4bp5YkflmgYmDE?t7%yVM?T4g<@231N-^&z?aYbU-SpPea0Di6E-;*voe~n zznE~mmUJphQLc04OI+nDPqoTdZ=~yX)Ac(7{dR_KE61=BKl%}FWv-eqv!_i5&kYi~ zV-DCI3wVwNEYA{FXbHPxg($E@2Ic=arPxBs1I!PReqDql1C-Q?&7Qn;8LAz>udGWoSWIrVH|gHNWEnp*9X(-8Qm z!>_2r_d$EW{pP^JP9JV3DYyYmlQ=j(xaD;Bmi=8v_lIttC2pQoPM!~(v3FeYMJVPY zoKK~lpK2OS1#wg)CUiq2YorecW^d&VL13*|HpqC|NL)*@o&1Z1NEx~P1y@w zW}QB>MO*b+b+1d4TdU5k)cD66*-3V~K8*98!g((cycP)FGCXP& z>KUI?{I~A(pGw_d8ts3m!Bz85)z`D5;*;&y#*zp6lPg!ajvhtc^hbFAYEqEIhua-=_i>2m zaZqJ1gWpJrslkUgCqwI#pkl>o84+iU&`Toy z6pNYia(wJ=-{bAlkMkZTVI~NeS%UWx0kcfNY!lJr(95Zn^Z!?G{7ZfQFZJ2KgV1RI zP5ISySSsJi*xiU;T;hD0@&7PImwdwIfAorZ=gxX^%elohRm$vc_v`QQ>u>k%>kj+) zGUCg-@Xs%!C*H+O4Mxv=h+P{`-d{>MSxZ!Hrl_{KnhgLo!_0M^r`gKTZ)KVG(v7=9 z-R2$RYUIlS7%UWKZcLMr5FY`hBcMDhpj3FK4dTu*_GHLEOJ zOM$JW@QRht#wz97)f6yT@FEstS!D#jDr!U>GqWr3!P6koW50(z%{b_Ms*o) zG{JQyM&3C+#YE?tDDgUKgoY9U##P^G!6rO)$=Rv*hQ-5MmZfgDJH6fBVZ4U$-d{=R zIRbi_j9n*VWhCql9y0+w`Ld<{msK;h#$FABvOTPp3?Wl_y(iK(8x{VN-K~ z!xKKeqtwb_obVkg;*}$+%Pq3e_jymy+rHqpy?#$RLq5Kao*oJtAB_1r6f-*#v-Fv} zF_m((ns~CBsN6_ZuBQQ+s@F1rBYI>m|2y6Wp$D54Y7T-Nv~Vt`x|1qB;oC1 zPJ=YGy)LM}C9JhAvZI4jR_~u7C5A}6h@~i!)EQOoO{_stYrTEyF@cTfP$?m{j+7#$ z=1Lh4rT!hF;Ab@`P8vM(rcXT)$lIZQ_ly`TqQ zl33er?mgG91A_i~iufcDML=GjVe@dU-MY+f2ZxufDG)nH^)K!jG7Q0Z--& zH~)5@CtaLRPr`@${9bl)-an077>b%2h?*XXp7|8D_$gI3p0qcce6*CJSm!D?cq*Ad zy(UmB^5l!@DjAS(rgkGkyP0m-%+|sTtf=3TIXK3=HIYRy>6Rg@0^1smJk>fM87gxq?pBRWaoDH z-|Y=7@A13aLg!1U$s$^o)bBw}aIG}1uQ}y?JNJEi;*;j6uKI{hX;@QTRBvN=PeWu! zYh-h4L|t1zUMn@G1eg`c>lsYcQM|TwEO`qn45fxQbXMV*i$^;Qre1 zcXbJ$>ta6FL`_JdrW!y*Pu3;P)Tb>q@>d(v78_FLYP@;i!9|0ymz(e9FRg57Y=s{T&P`%a2C5krk6-!roBcQQkTLXF(ImT!Ro=L#q|6lY_3-{EG9 zhvO4(m)B_L0j&E+g69OmeTwKkPsA*d(W@l%ItjfCFhkt;3*|o)cQwcNHAjV~hlQv6 z#qzx>`F6(cdaP_Md|@^G>wM72wD0ptR?7(S?l2+st*39l3#*mU)Drr!H+;A^@J(mX zKu^rvhq$?+=-JOPGovv}U*csG@w;=t45uh%DeCn!V48qfPv-ci3+bvAzGgEWaMf+` zwVRnLS%H2j>C=1jtOp81KuItt1p)Dq@N{crmK9uR0nf5VWZS^AZ4p^lEHkg$Mb!b_H6d@M5d)&gPonTIHDROT=t*(( zlr(X+A#uJ*u-435Zs0A}#eQyaznU`4HhKpmDttB`UbTJQ^VcrOs@YdBj7yE8cr{|syuQ9HJc$Z;}`v}hCGs$ZV z1i^cngkB<|R!A5b9{m-H9#}5AP~@nN(p5*PiX*P#KybXz-P?)YSc?FD_}da^d?8@) zE9=Q5z5WyN;V@1x zNxqV-TmeZqO)cXoSJUNl>GB1ha?M;~b=v~nt^i0@BgTEP2uhJ zVLc7eeJv5~?GY{QoT^Sbw*}){fo7Lu{3_7?<(}*^RCon0x&|FxM&g(I<grplnc%Fq{8;UB6(2g{;ARmM)$MvO}mXIc{HTX?H&yrnL|a%b9dcl2F~C3$I|Ek&TTcr4P6_@_@-Y%=axcv2&FlFH^I5`82)h1@tG5L*<<=Fkn|+73 zb3fYUCEDpN)@hL9GKBLO#<`CWyguRGhH)MfM9d=2V-1hqA>d{p&bt-ixq_!SNl_jr zpB|^kk5cw`qSw|VS2sdt*Mi3u0*B`P-%K!j$4J$m@P)&ugty+IuU#m8=#0jYk3Es& z{Sl*&L*BGTj=zdp_z*EY7&$c@weTet z3;LXGfp&|hkqJ(h@-z#qM;&0^1P)|?Uf~ee0+wM3&j3{x2@}{@WZ5Eft|0kWtpqo0 zv#;Cc*;)y2Ugg{0;Cp-C!Ba~p0p*m~YHC~!BfZ71up{7p7pJZ(w5gMwQ%~hq`xaFP zi7F!MtK<9Y5}($kylzT<(v;9$AKg|L-XIBU5=XR)!g|E9PitfPn<83U!fHF{>Gc>+ znRj3*F1VTyS%nTO_YSE>N7Z0sD+&BcJgZy%*Q6KqE8v0%w@ktyv zA&H)>j~EB3xSqSxmM-f}U+dwmcBd{pPM+`N^t8CqGp(#b99-JH@n2EIWpj|exqCgo zWp~%c5*$N;W4>#@jt$(+XMd18I4!toQ|)}c)5GB@+HC;sHjH&1B6@tpx(;KVK+pOS z3smbif^q#qbf3a|%n-bm2&gG2XkaD%OqrxONl+Xo9v>zh?8k0whAgcG&#nYcE&C47 z_`jP9cstH$9wpu#!t#c_!e4s@zIG)(a|vt-c=tGJ>_zPCn~;It;Eyk(7l3IRivIR7 zdhv6@#(2u^OybE(^66@ld^H(}Rk@rExE{@=E0%a_nLx8C1PzaFN1$BipDbl5XW|A1 zkd|O-69Na4g~hrmb#ar@s7YzuR6TdTHEZ)JU-pc* z+@CtvpEC0#aiYiXP9p?ie)02ynNM(mp8^Q&e&GZ}y+9cT3m7m6)KqYTu|aa3Z#BB# z?!vgf#(2CZdJU31K2qHQ+D{ml_XM{O7?&Xc814KK>--r^od{lYSdY(;|GP2%nJQU+ z5GOy3JvfNo+6i4<51v~Km|9_fTJ#y5XTA8welkOmjNuDDVv>hEL*Kdkymn{4cB1w9 zwD(4gJ&XSKI^=y%(BR{Qg^~EV;kenMxW$jj>tE7#zNQ>4rknz_Yk+R1a#<+X$Di$Jcm= zlv5K$G`<)YUqMW)#3oi_`Bk(#mDK!))CX0ps!CsJm4BBw;)Nt(NRsl&Y@Oo9YvaZn zVkIHJD+j< zkC^xmsE7g2kO8mYH!jqt#Il~KnU~3nuVY60gWmPUEq;k#{2V<$61O;#xG~1v|CV+< zpLDvCq*zToUEwR1vJ~@K@)=NN(-ezB^;)iGBOT;nFoDvnr=QGc?v0UB>dZ%;FwpIR zVLBN7he1#j97;gIfKQIML2$2HXPP@#iwtXvw3|1wyz%#Ov~qevEn8UQlPPAUiP(br zz@mh6%*F29lvcCM73A@;j3;Z%ylq@tK^QNpv@#Ao$UP0|pFC|C*{a&>59byQbP z-1FM_XLX5>o1&WP1Bx4bavN#9I(lwBJ+F}{sH5i9(eBqW9!h+~wLqrq8WB)xK(8e9 zxj24MlK7z}?sHwdS*+FZU#0QW4YA{r*fD9`M7?0KD|h30#@Z|X>dUmnCrPvY{H4ys z=2qZuAsGJu-?%_SFrZ*iQ^70X3IdEW%mIV^Zdl*zzc!6;prV_u=Nb?l*ECn+~ z@EpT>enh*B0M()$-gw`7?QQ=CZ9j;09mjc$Li8t}V@?#I8wVllyFqhX{$Dp(pH^A# z7pcz{C>;xg$|-E|G^TI@o&E)rG>VECK}C*ug^YMdjJVO>VKVw-W?l(aU#Bm;3>oYL zW2V^oPe81xvX5!oV=22+X-D(P@}*x~m${1NO!-3A$z1y3bn5YpK(U;qTF+3grz>Tk z^T{}#7an~HYkX>H8T;!Tn*+f@Ay^1F*g-&1Feug%o@|XswY5sO0om9p-PS7A-XRl1 zdW2_{GGipnq;h6@6+5HaFRw1}L0e!|cW6_0aAgZStA?E?4l0p^)JVdlHIbdtXpnFF znA_eabUeDq)i;%BTahV7}EnRvDB})-oK!g%4?+O)iZMINtxA*!b;}D z3g)9qe@Qi`qavicD)dQ35|?q?y))uT8Pz(uA*# z{Q0&_*;DSyv-I`n{N*Ryr6;_lX70y!>l@(N_4ox3>{{S{F$NnpfF%G7uHbZ%0fX=s zP@tV{k>~AZ&)bi|$dH2hN+--xF|$O^uUPkSjMo>m%Q)8k6UOPi*X<$C+wVOASC_z=3j=RdvfJGt&VDr3H0B6cs4z-L7&=CH-Hn4B+|>{0L3kEpm|bmRxmh(T}8 zAS&p+SMY!v<+VphPt=#kg7r6ftFIzIbViK7iCg-Zv^bQyF`BwQn!GiUyg#3Kw3sMg zPB~rX0>^Z^m~p%yIGo}gd`p)vg3O$$k)FzNPP2K{qJ>z z)b@onbOhY3XQqqTcSQlk;=r<+$cFmZzJ|ERQgbs?*AQG?6If9lP*&zAstj(b=Cs$w zJ+Di8RU7|U5-O3hGNr^65mit{&8VW}Rx=)!`$@}ur6S+vim+$Wh-dW?uO(4~^|2o$ z$)CiDpT((Tl7tCK{Fmyqnfjz}%}G=BDbsZ+vkknZmaL8LELm5ktS57|J!7?lFKf!& z>~Qpn0bF5l02O3opjUI&{gr#EF!NzP;0o%lClU&{W%JP8t{G+b6ze=d09_4gf{dCb zqrT!$GZ@!NV3#m%qd1rM-VOtvx89;125?Squ+A?btmrNKqm1@)f%bfn(mqeBo5hw* zVT!(b3rA7>Pw147Ua^CoQE#!a?@`eMo}mNY0q@-W-g&U!x{+Txk^6jK^a(cK6|TKa z8S4%C^gM3)Q}Qy<>nMoi&9T(|*@UCTToUI-Ly9#+WG zPgc^8XEQg)c*`FMQ4+8k0fYO%VE%Bp9~{^y^EM#|35!O+V=Ry{7KnH&coK;OPs|skW z@N29L=q!zVQ5pG69QC>;VOWwdB1-!#P8q4;PShq()Fh0FQoq%4XPfv7&D{A$?rgna zxdlMY+33z*?-s6iX0ElT%r|Ep_Oc$`gCI8;{C{eyHv|JW04)Ov1FIK)SFa`6SOahD z0fX4rklD^xD?RPnF;0&`lLNF!MvaqD-w3F$c+W|k+c?JUGtTLgm))?J{d+IFcNoWa z;3NQYO?!c>TJb8H^SnFfmHW**d&-+T?v?z-D{<5#Zp1To#53v>D&Y$uWda@j**kO; z9rVeY^U=%iy%+PX6S{}d&?(q>1Gr|*Jq!EPAHVRCyE4LG9p!F}rtM6o?R`r;oJ%@f z1W=PtSGcDu87GSw`&0bA$@Ie+p?o1ldQ zMSwL4hy!dC0v2U~046!c0v>IHjB~IT5a^W@|4N@&5j#Z^kS`8=P~(?fA5hp3QqvJu z-xDP2^vP?crivMSDI>MoFGn1BUlLX)j_YlR>u8Q@uMZMSeM?2`3bDUP%xM-!^wvc` zZHNYH?y3uKZSu>Lkdmuu{0geDf?ia?t|<*_Di3Tc4ecw5dQlqpRvbGZi5?KAevx@H-zSZ{a`eoDK~xw#2<$B&VZjI}3<-;{fJa%tB9ZVIkcw@P32yFr zG=DKQu#y%h3dom)RMrNUN&*Y(IOUz8HGScd-Y{`z(7g^8zn+pT0$c+MMd8)eVU4xX zT}|t`DHV*>3&tCSGtF5u4Z?*6?p!1HTVvX6 zqhPtUXzTIAo&JKYo~-rO?DdYUo$jo?zJ%cxgf%FrphE>RC4$YHn>SKDF@>Jw((L|D zNoN=E$#57R1`#Y^aks219c`t~*E&5NpP@jSbsE6CyaSyp%6S;=GK6vdfN~l{I}dx= z4PxvEu#RuM?4LuPITAwsGgN86XF-ogPOm$!+cmDwmD6QMth?b{bJM=;s(qR5m11zR z{cF_&bj{%T0&5>;rwV#aTWVU|+Ca+6yUdk0F`xT^X-ZrD#9tpx-}=JenF3tXjuw)R z090U!SJO|IGmq!94<^&MKk>FlGmqx7PnYxLOWEf7x|FdyAy^+uUm76B)WE=I6AYBt zU^o$iyAz-VUxv6_8@=Ih@P0C_EaE*-h4dH+Ii{-UNteG*9&p8Q7y)LkzI02N;1;sf=}If$igA7E zefu@WWdP^$!Own(;{D#sX$a*wgmE15vipQ~`iS@XfOUBVIfd7H3ZFX1^g0E$+4;BG zk!x=grS^nIJ5Xrv@`)>(NRf>vZ%w7`&!!zOC7mp%oyx!l4EJ<7Lq4B*Fv;H;$=n;ibGmp( zu~=}jAUs**AI_)mjAg72WNf?*Ea|pF#Dj(hh6n^n7!+3+6a=oI&>~US!`B{qdIL3C%o5gc9@RzE*T=Ru zL^d?Vbhm^xh}fl7KE-7|)gpg!1vu3KeQokUWAb2Y>OgDSySA{}21cHgQYdDYi|LgW z^y*Tdh7#Y-3g3<@PJd;@>)QCCrl=3K@q^Oj;ii;N^$8;li6hd4FLhupkqSE3uhNv6 zChlx4Z@xKit@Hj?--F%0Tv>C5tR-iwD`&G)xY2u?2HJEl7>ojk0_^N~1phJ?SHg&` zrU#0y!howH!ypvk3Ws6APAeFj+raakuZg{HcYE7CM%zEbp`ZCUydXG!@OFNKb{s@G zzC+y}K;It3I}d|l1$4!|_!g$_Hdf>kRO^-8PRi<_WOsOlb+|D*y?i=7DSghaZ8p}K zzjmO3Ndwzi;c$2^0`UNjD1k%wAd4K|mtDNg!HktRv0wUQ7l#vNW68^-F)Lq^HYa)e zGiI)b%c&oTm>DQE5;O;jiss+3Fj#e();wafw(8n zZruhCtRD;kSb{w43)~Y790|a{@*fAt_qq)ig}R5Qm65|see-Jki>iYkm4{SRg;zHP zm$h*!I>Q>ef+bx+$irg4-1?BRhN#x2n4XrX&i3$@*04IMf3?J~ygEQq%W0BC z^fx5FYvB#I3r0IKM!Rx8b|?0>uuH}4(rQMji2AUcR$lDaTJGCb75KP}(_b3%R-80c zn>bvX_`W9X13)W@dRrAYB8?qyiXE$upKM9`+LZRKjXT@SUuex+?JijFy|dYqx7nG$ z(UZ5`S+LzJ-0E`;0(%6&3A3%NVqDy_s1a54ureI|p{p}k_W{UBa2N^>d4jM&(2>YE z8>_1#3v3;b(Y8^&}_hAAnQi_O22Uy$cNTe&>K^??uT z!)jZidz<4Pw9tIF6drGbyD1D}?My{w3NCygGgj~S?s9gs%7u8Mk76ZuXOJyI9_ zu|D>5eaz>^gb84VThnKo(ihqa*18H;+HzOh3pP9M?sVjCwdQZOWpDR-M}fT`6mb4X zM5wc~kjN@S6N+6NvaZ-Bz|9M`U?_pML`FE;m15AZ2!shNZWfJRz@uit5E$(?hH@VA zc6j0G@B;1l8s+f8+hG{zIe~K&SCj}bP$vWjJN2QzJ~aho3O<(sdY%vqc-(Ef0xZ3Z8d2$+QROSF z3a+Y&XszQ^g85&wUqMqqX?u7>S4e%Y-~Co_LdU*W#}U^@b~MHIHpM?~iSKKQXs8cq z5C_yq0;;Pyt)i%YY21sZgf|WRkrv)iTi!%p#&B1BS4)tnf%&kGS|ldlDWO%Du-nUn zpGktAR0Q{#BkYAFE%8v>8kjlfO3dzBLM0x(nBO z3RXJuWLH#+T|n4{xzttAkeN~(9WRY8AUn1 zfo{5%IZ&J20z1*cJ*be!UhL;CsK+<1)gd5rg@eFpC@dQeFR-$>bHx_e)JzBhqxob6 ztk43Hf8|CIc+(wX1qmzf~F6VGTus6@$m`q(9N}hY0`0X_-quJI9JVqexM*y5a zy8tl4yekuEZ4u|@QAG4Dp@ajyR5X-&|hTE9ZzcRB*gyJG5lVye3sSyEP^ zIH*Pv-3gT19@pOy*AK2O5sfXuH8lZZNuacb(<+VXu8V!vko>kKWuUe2Yj4)4PTtGb zh}s7B-8yi{O21o6FA*`S%Gu48{=GH9{nY_oHNMRyel3;$?GnGXO8=g!;Af)9*OG`q z3Fm_(exj8(-;p@gnmpYKhD}*3J-I8Ld22m6vd*H7?z>yPMLS*hw>t{=JMig3V0vLN zx&=Jk)+)jNChsaT9Gu>OX`&@E*2C>39y1C);7kSobOHE$G;R@xS;S+P3D_mPS+&dH zARUXI!=a|J?h{}%fpQ%5vLC=WzV*H}fVO`E-EwJiz_vIM+dN5qE~uUxw;QZ1@_%h< zgFhf24!es4n`2fL7MA~qq_=Qtd+oYFDNw^9!CfL)(NZYxP&`6Hg1d#d;O_1YA;Fyx zB{PKFGzwdrC_s_VSb7y|Ta2PtB)0O=^d#}CL`W5NI*$c8>Sdl)=unvR+st%pP zGqA}ue3=ouI~u<^8Y}FN+MG&}iwG*1WY#j2tGLsxw2R%ui=$V63E0waj_}YrUG0(1 zHZtV%$Jru*gAykxM$nB2f}u5V6lU}e)wZbvw$<7FYwC#NQe#tv%~#C8i} zI%?r-Tz7p;M}0V-^P-&glEw_>(<3{15nY_5iTaG0dl5z2Y)8^mdrW6TU`4$bNpMdK z7jmDKvE3^fUaT7bHpcT#rf&<~n_cPKK=*B9KJTpz8KOsyGNPu~v5V~Rd1lNaCvCGn zWlfO0%1_y7B<{7r{Yp7%&yqCf%G>kgt;HuDC91ak(@s<}d~of-$OS{{lSh#Tx}dZL z`=#?E?KnHj0kpFa?Xm)j7OcxQ8nf%-yyxO{k1N_?59P3jK^?kc4p7eb4+gd4;<$yf zhlzH^*?ip5WW*8Ct)XvRZfHs~FsU&xq(6EL>lC;|fqjOdimatYfBLZMi55*?7pjMY zwB$KO)f!n-A3aVsb|#~fSRk}S*yrnDUxkbM5_ZO8R)%2znxYU9)ay8iw zEVL(2H@%u^j~{7|Y^r}zUgt&Txe__<`7HN5j%!(^S9O(dJ>9#u!h;DLy6WdG)dB5Q z0bNz0gUskLX5<7bYK9)S!i`+!CW;#qS8EfYby{yC?zfW;yU0gf9C7{6VXmn3*33npFEA#(}5+Ai?(K{m3cSHVG8B2fOcF#J8xp0571~R(*qRh z2n|9;v;!jYp44v>#Hz7V+Q#bSTjA z!ZHD9juf~)pFZa5>Ne`@wwM^UnHV=%d$WDY>OBZe=Jyn?x4t3H7)jDIN_}h|5jftO zust3v9u41^NL7f4>dg$rTAF+{^<*pkbT=8!;mhO1YkBIGB;)ER^X4e?dIxv1l5{+u zsuX9)R*A|jqHH5|Z#ijmDsgQzVYN59t?ijZ`NIcLpaC%9K;s6L`b0bIu~v*VD$gyf z%q^0d4HyK2BgiH>js3Vw@Q}&5fC2$1QT=SGdv3f;drK(h4_8 z#7bG?lJ=X3+YQ9MW{RXaPtlnzZ>u=(t5kOsp0``Rgkc68l^)<^dGsjaoaB8+(U zz&zM3q3p$I=Pi`O)_tSovWs$-pfL&*3cT*8SXVX1MU8Pi#bCh$56=k}s{m-xPDd`b zVi$Ahr$#jH9TWGxNq~l?r{=wB7k0dXT3QvlPuNEKEry2OCPsZGh+adJ5Q(MmXhV|FbSa8+)moNT3C9wuEJ zCtfL1Zsh5=(yW_(()E72a^=@K8iO((65#EbjmhdR9c7>_j* z{<>M=2nhxA8uS;|21(v8YOs;z?g?c+l&Y8P>aZ48R4Y4@#|dWEM+@2`1#LmqjRE-_ z-+Wpy`+flz)d9O2esmi*x``7En{XN}fKeXWSQXMtiyvVVL@mUndYrHozuK0$)`eSY z&X{YCA8HJ5Zt^b{co(zWOBl~sHC|kX7oXdqK8`5x;m|9 zW;5odlSoUhv30(I5n0ceVvZ`a52QPUu=K3)CJvOR2H>9wMpcx=?T0+{MF;%gidc2Z$w44gt_|2(! zkRLA&#Eo`f!|6{Sfj04epY#6@T5zJ+Ip%o;GF_v}yeSngnN`7!HIZ%XNIo~Dh8xCf zjcVu)Wp((MHa{cteDc^qOzyp^w6{K{yE=2u=In;FEZ4i?Zto9Gce^yEnv@53y+mWKFs|1go|kTJCm56zZM)@Swdi0r4!A~XYk6yFzk2*A z>*1q3O|7B_T5!xl>y!>Iw#Sdk9zM+0(uy&*$#)Fo**>py45Yb)(3}DprtXzGMnvt$ z(3kt!lCu)_Cu3FyV>ZX}C#$%VbqIt?yMNZxPPTC8Kut)J?^|MN#;ufaE6Kdv#;b%W zlG)_r#Wd+khGaSYNSL}apR_ifxH=rO*c&_E?w!ar)WQ7)Doi-QCPqAYnuzhGJ&UD# z;b}oNHDL|R;09)7Ei0VPd08b0VYi3#LF3=%pIz@u6+AEIgmT$Y9sKydhJ@a_*j9d2 zJuigA2;o(Rw^W9=RmJtw(x+MYWnRV-hrC)#7V;^p_0-j-%;n~csm7RAZXlEH1E6wB z{TfRAnu-H^DnrN0gGWn4U|^l*MNR|nPlw?(c9Ic4$4s1O#V>PX7MO|4{KRG6D{*b| zGBa7kP2CdUcj|DPb(x3FBuNY9sEI6VEjj5dy6AODf|9TX7EcRkH7%b<+DX=?%?{Rm z4tC?tpmDKZaJHRC!Tubxhk;l=LpwJ4mi`vaq?do>w=5gibaf@}ob@zPp%=^~I z=gQMf<>q{ZwOexvDhEAI!aWn5S43bvek6? zdWvE*?PNRq;wa@(mV7Boxsheu9OG_|2p8L_a$)lELNY7~fR>Vr@lsLR?!qha=qpiw z++2VBL}yS=9l{X*7t;jViF>}u%qsI)B;AKZe_mb_TE~Q52{aF(Z05@n{>$>(u-dlJ z+D=fwyeJU7%;vr*;J&1@!kW0TT`;pY#xwwT$PaJign}BTiKj?SP+oc8;C+a zb)zVnKqaK2gZc*r+A!HWPLmGd639yAAlGR?1;h zHk`(irqZiUpF-$T9W}MRA3p-ckH5|ns*PETomIDs!-R|Nl%vfg%5l-fWec(rG1y}) zMvBGCFesIa(;3S75{tcd^SpI?_TJ6wgO~4nAHR>jz8^e1&p`5zwcl{DoX~jkv`$B_ zMc=Sn-*Cv#aKs2PWMt5*^Q1vrvqsmf7-3goXqv5WnQe)x&_%?#;LH8#T<#27;5aiiyZBNzIk*T$$P!Yl=VdJk=yRFtCHPCY+NIX`}N53Mxq>M-LP zwyitqDp87TAw{_Yoiko0#7W>BUQ7^ACJ6gu=6d4B+e1nOCMKDh8ez~3Ls$GzJHi%S z?3=_4tYig)!l8lnlFtg^GlQylzIn9)<&EKj&PYyYa7{~KL1RD;FQAwcNaKX^crh)4 zsD|1w9xt+y1J`YM8zZK#CS`)1GQq$tuqhjLlnp3TUJiV-+K{!{Ok8OsEYv0ru)~@w zU(}WPHx>nSmIU?}g^!j-&6Ed^mjsU#L`_yiPSGOAX`#a~;nc)0@Lny~Cau)sHyhH$ zP07#Qq`7H``i{Iy=lc*~~gQ&bpw4D9kPf4aF)&W29&oC0wE?lp5=H<>qzk?)}!?>%Euv zN56nOKmRX&J|8_@FWnrJXxnXP^GS`TPdW^YhKx+cj7=ttjmAujM~wCRbe^>6Jf)f0 z78@9oG&N$79)(se#WsO?Zpk$79R7>i)<8k?OF>iAbdPs#gOz=mo_j*%%1GqWK=j%; zRlPz{092y1V`2I+5EMHZ=lf}wl9Wqn>ZJr)V%!bj3Pi-({r#$3fyXDP*}eB zx)+6@RcnZ>YziqA1eY+M7cyTI(O)vE;5VayQL1N#*H=fiG9sF3k-aquBlN^^ZrWTe zX|;j8)l6QmC$85LSL?_dE$O1h3{fL~zBXl?AJtVI+FALcy)3Z1B&at(WUwe|vNU+8 zJanumVyq;5q9l5kM`P!Dqlel#tx3RkH&t zYeKlR$hw+{`s$e0s)&~I$nLU;-m=Kv%DB<0n^V^7pbaK%G*S0jvku!b_hHUy#2wy?C5X^E$zbMbr7D^ehS(a~ zAa?Nq1p&l{nIl-17R}(%u(cYqw;FS>nR9j)J3DQn(MM<)W1tOoJw;*8FdpX^w{v%& z*PdPo?$QDTrRNAa;(d`2Eu&7#zkUgyN)ymM8}b)b7sg% zW1V(WV_3UV{~9ymUEuU<;kn}&cF&8wN?5^7wZUy%&wPe^rof%hpktV&YmW;W>5N($ ziQ1f|0SI&?!)ak>=hbtCO$H|^{wP(blp8_uqe;=?3U6UwL#XIF>wO2hc2k#$9}twm8y1u^Y;k?nc0LnQ!e!UQdO zhLyQio4wUU*{Y{*H2R$Z2empsFWny3sLEDi20_3z9L8?TI* zstTGY59lj+K3EbuT@o=~76ItaRmCqc;-O0t^HVo!Vd0vw)sV5-K-y`{+V9Mj^-vDm z2|KNXqfW9MBom$4%1+p^=c(G#78|wnyda`Y>p{RHZ5-6Ag=w9=WxJh4ubt(fqurc~ z)1tHE8W4wAcNx}I;p+C+%nDHJ;C%AM{Mas zji`qj!A~DYx%ig_QR$&I)xn&K(7K8sUPV9!&8LtaSjG)3;Rn%ppbvf3%#0P#qU-5V zg6jB|inz|o*v`^~uHxvHqWJ#e*um2Hk&^havc##fG$Df^;*tT{y`~(X`apBE$;sYk zXKt{`o4o7|PSz4LeY!e!v@odBV$zw5G;Ye; zZ8dTRLio9s*2~8a$%eXBNCS?IX`8J@pRMJvqwTD-!?Lr}2GlDS5OqI=&`XTlCC2jx z^X!eg&qsHkuU-M)UXgw)7yQBO_${aEZ+-#aUESYdFgF;qLPJNl&B$m>-(b|hV8lSD zOIN4m>63aBYc4jo&M}Q+Y?`C1o1$-*_`Hs9fhHTdB!rJP#SGO3Af>3W)MJzcqtyF5q+)x_md^3_q=%`qOrC2kHW zm)o#Q&rmE9Rbqm2HFbCS)yh=t+(6VwcVuT6?S{eZcdhu?NRlyaEZ~@$u zRS}J};5tSqixpW4lPfRseqqi{>f)z%a#A}PuR3a8bDgEUM-6aWqW$}Z> zvBPizSENiAq%4-;*JzY&PWA?yx>uLG*G%26C2t8Rn*!n*kGxfzy&=e6<&&0JF(aix z9r^xsIsOe~??%$|-rN_1dCz-t0tRzJr%EEG%A)5g66ed4m*{Emtg;Ckb)@ZP@?J~s zepkUkPswqAp`@?yxSz7$N!;(qQ*`I4`hZF-Jn1G&+Om~B4pFd20VP+!W3Z7KFw6`E z*2s1nivfGP2?yI5Cx-=;%PIzQQqBdzsbaO#0WWVWHfA~*Jr5TtFPbnNP~~C1tW^U)Vk!U zE@T7vyOvk_l=5{=6Cwr#;Y_}TEz#j+F5vp`aX7*Xr~Nn%O{0Nc9c%j48*>Aei`d^cSU1Fi_x07TVB`XTU$bMY&~ zF*7}peI0=eF6uesUjCvHg0#SSr2tc36Dp_*t1F3Wtq5tLCD&Hb_|>rjdRi}+Jj^8z zvB)DF>J&d~lt~_A635wu5f)*BiJN0(PSKJ^%A$u#5+}-%=Spzv)ub&Jb(@*9$Iaj8 z=k5upJACT4fDF$LKNp(S{pQl0M(Scs+(c$^-QsuDB z>CRR66rFbEDS=At^`hk6OT!;{=sd<7=@ugm7*?i@R>&?#%OOYWNe7!H7svJcdi6Mg zVs-Vn#5}u1dt6}vSMQIWes}(%Ke8%+Ynk}Q?flMe{E5&0!`uI>tLJ+(_Dn;^px4-R z&d7Y)$ZXyaIcsD#XJkAM)6SEJbvE7tERLs-AZa~`MR+7d4%B)TRoi-I*g4~L9)_Da z63j4p2FMJ^x_PJ&MT z1nD<`tAu#HmvOO)JKG?gZDy)BaZ=$c@PMq0#4Ys147CK(_}D=DBQ3CUL|R~SeJPA! zW_46cRd{<@WP4RqcTHj!4cE&cjPkQ*Ym4S<^JZ)F=6Lz@bp~tt*k$6-w(X6)jbg z=8`RT+Ej5s8^yaG|GY8dc?T(IG&^`KJ7^>~e5N>Zp&&+B_)1h3zfzIDR!!JqW$kft zBn>6uVWxqDu?J-c%CxIo`Sd+Fx+*3m{a(+Dnr+Wbr_{WxtBvSuvI@wBbUBE)u}UPxu1v+Gv~zxtba|M5F9bi%xIHG_9^k>2bG}J9-^x7S z%22K+?=K~+O~%djM)tJ;-|G>|(9y|!pb=y1n&*>M6U42E?x~9DtxgyKs)$LRW>crQ z#dG`$VO`mxpk$%0aE@Cv%gLXmQ>R$jQ#FP2jO;mD)?8)I5}mkMlQ>qKFkOJ#tj^x2 zWzOt5OZnRD*QoFika5 zt{lph_U0)1vrmQ#PKUA-eR(H+RVVEgH=XgFoWC3#PET|*_4UdP^vlgn__mhq4mM*> zHq$8B=Yakjwdv|E^?Y{W?tSSBRIvLc*7LQS_d9p*JHL>hN#vir-fx2&UkAkBnO(oV zi2mvJ?2D_%t%e~|gfw48n2QlG?I2f-5lbeBIYWbK1O2{-+Jc8qbKMEet_e*D*CL33 zH8#ilU9kP_1MWZ7z} zYz?Q{$v8WJM6T4cePEr^fGB=_OuRkBUvA&ydI{3C1A=-d1zfY+Q?X0E5d)2ZO#ZVt zx}hPE;~_S#RR6rn(7LjSwzAm1^7KgtRmjg>=9Vn;D@6^}!upCOLFrOm(YzpUmR~r_ z$(iA0&vFVE*@Yrb;VL^{%+3)r)91@mmrL+F)ue-(oI_^$F|S5Z&s5Y`OKLf)R<5$W z{GB%krLCl+*FPfPy7#a3Gd0elhQ4H2`V}~N=#1_Zo8VsS##)WF28Lq1pYvDk3 z3#A(wq-kowHrVa4RdDcRf7r}$%tWKlB=uI2 z`dXRxMgfW^ShHtbZ<9ch2xJAE)lzZt{%oRnFlwwNm{aEwNi)`ibyI+?CpDlDcwMO1 z>clYyX_1$^T9?1VFB3J>M2$3IUByxz6mH=hr(l+wKf}tMVdl*;^A_1i&wWp0wpgEgjgn*lTHr zB8*w41~nG?d`qJyYqKGkUtJuRF_<+pddCH|hsG-1+^<|c-(a5sgLnlc>+$^4v*&lu zU;fIe{xQ7vWm)!R>-(-$g{d+zKnq))3^l~(LCH!|V6pRBk@7~F{#Je;I&rf{0;?SuWG@dg z)Y~}8QvCX8#CUsfE#D))+SC*}#sDiff?r8-cxQD~Z%yh1hq}n2E^#SBZh=rxC9J2d z)Kx6<^C#K4)9n0NR^9?LZ=RFCz{wZ#OV`*%>)fI>PU$Wuce{qXQI6ZJBpp@fNZFOj z2L4I&^v&SLhsBML3!9&WYaix!KMUpGHZFc0y!%sna<`N_S>ne_dD%(`>dFde&kP!( zgbq_9rgEc%Iq@5%xI;Sih(X7gc%sU%pos4rXXKAMs zr6+@>7ZX)iQ`OgV)mLLxm!p*@{pII9S$jP?7T`g$*VOhw8r2|;Smp*i8?#P(^C6%T zU7VNEs0}o{3;-iRq1BK<>*o2|)$=vh?KQ^jt()&hFTbzeFMh`3e$)+o6{|l>-rQ|n zf8z}Q@jUXqhKc2@xy_!5xzNyZ8CWMXGogdcu8qaIf&PHblh%it)gTpq`jlq)w9i1h zO<#kr_o&R=tr`Z2QjA2c=`u{w^E%;u;>X%aY!SMG&Q zz!igV;&cbP;-pjXU`bP6%Tr%N#DoIelB72WijjDYfju#S?jUS`55n>f#>EDAE0_@sGuv5;RSt}hqD3Czo#<>fE1^Ou-; zbBw%2X2BA>NX#nS;FfK2D))Is`>gC8dgg8o^@yG=sVSDStEGbe%bxvDi-&hBitpQ3 ze@fr|>-5uqF24Tz^0)t7t3HY1>L`I6VpMNlNLO}nA2nn&J9;)hVYwh-v+UIljdEOD zs%U1NboO2iExer-e-!P0*_D1jkbd72e-!s#PSl=`aL&i+XOop@i&&Zo7mwrRvpJ_?oO~Hpu&D}hDy(;u>lx7Tp6?~A_mi)W z?~C>Q3Gss}_oF=jgQVuYr0E@`03AaL5dLB_MKYBj>Wk=a@F7)MSOczp2#5F=HN_EK z6vm-xj(DA}6a#p=SP>cSOT@dl%E zhh25ZE0=Kc4_HuPIZ95}F^zgqQ6yt=)lE~^gF7GRPJirv{@3~U|K9xi@AV)5dGqi8 z=l#)ZVL(+zRC8A9Xi@w~e#B^Q#6(W~a$%ylIC+OgKIE1tTIxuePRP2Q61<*fT#lBUbmvNY zOgth%CZVYv@bqbhy>*AJMYElGo2_M+qurpB-L$jg6v}bc#d#Nlk-I&+aPztc)zuRY zoR`Ro<&lTiL+MgHmh>!)A;x%>F{A4}?64Wwxw(sCE(921Kr6Vqh`u*8Tt zWBoA$-EM8oDm|SxQ>54wv4Ak1N0`hR8I0-c^*nya(|S<&P^X3ZmwiU%6m_gRJ- z@ixg-;q&9+%fp$<`TVmLoO~fwx|9lotPHeHs~M^d-04m_P)^s9)He!9NzD3mLWO{? z_Y&^Aqvdx}@;iC@TPgnae!5zmvON+#-SWJgW{U<%dY~RM)~`4xysIo`lodC^$(Z00 z=ee27e4>~`SY~H0GK!WtIrH4S1%A#HBY%;ZCuS9hYl>G{MQil3jhd=GMzw@jCV|0* zk$=q0ku$R8P_>oC3U-B3z&~l6yy!joy7B$rH-G;3-QWM`-QWKG`oI78POO^prKQDp z7o-lCq)k;O&6h<_<;97L65#}f4~MFre%9W4(KmcKynHip^7Y{E-`BtX_ubF`dHd}@ zw|D=#c>U*z?AyWU?KJazm~}b9d9&E_d9(L}xc2pI-R(r(%_NurauwZXUSOVZexU6G zA|wm5I(yqe8?!ch%U*lSVS9^lN9!p^dyzA|e8m;miN8iz*DDm}5{(jRS!}ouF{`H@4=ihHN5ElJrR{Mr9wwf;9cg4sVASgio^7J7`N2kFI zxnznIB9RLwCNn1bGbRR8M!Ey~x_$ajyA5X%229w|?lW+pAvCeN@5a||-L*n~`ikd?W} zrYz8Ng`B)aM&1J8TAeSX6^g5iM2ymPTG?i0)qYLcA*=M5nR`&3bx;ks=BYS^N>+iK zU83YwsTx~OJCxs6fByRhGDH9NKkt6~=jE5*_u9k_ek@#cM_$}Oe%f?NhOjJkr8HqB zKV`3qqU7hFG*+J8Pee`X-u3s(7e9}G{qI`{A^rRRe*D}2eE99ZZ@&NM_Wj?~>z~9; zHxu=@vu*EICckWteOhaKx7_-Aw)4$w`B`tavctj`WcPLtw7|>k^7Qd5C;MSX`yM;9 zPFwSS2kRjR%P|+b1s90P!@^5CV3~7{b-h5NVcNMtdE8(C+Gp>vUUvzEAC>&C!sGXE zzQbSr<;y>BG>nkFNUI$q(^&)4X{4DLVX|msG-;$aYGOEyFkLn^T}L8B2;`En@iM}A z0ckjcFqk&dnKCgLGSMB>f7Gkkd?hq zL!AdAf{`bp<*soGH){$uDvP#hg%W1Il$o_xow-*DxE7pni`2XV1*1^TDOJ|9)h(;< zXW#!R`~Hvfx4#|AJ`3kB`$&UjepQ*_ZPeKQqO`d(yttaUMN8SKNIznbH!j^PSmxixLn=X18%ErjX zT<>Z^L|1NXe__&0X_}}Eze7vgugW-PQq}dvmu(d{JvG;Zf}4S{x09l`GplcAc0UNE zU$)iX_fNm=TzubKdnatZ8sXebuwGA(d|elP-xht}UHT##|2QZ9EMi{{QWV_?S73E) zG_)LG7Yo4ypzyV}YISxN+F6aYZ$j{SNGRg zulKGV?>)Uf`v-q3V||leefa$QmmmMU(m-0wAgxvnfFDLqB21>t5Oby`GscF~2osT+ z*`~SqCX}oxa?Q+4gwS6!Gg?9z&LRxvkcRUnhEqm51BOpJ@1fNeJko?Map5ywZ^*(# zu4rKulO>7P!BcPErjio8#ff;$=Y^F6MF zI~DG;BJ+cke6y2!I2F^=VDAaKcwck(*r@(e{6;NZ)mx$LCT?+YOLX!IjU;B_#Wj>Y z9%WZRfo;qhAYF-DDkCgake17dD@B>W25(dl)=LT`?3`md^|(4;#V$|_%FbJh&KgV3 z8j4PM#b~vzNSWzYh_!+!bG-wy5d4eRW6ehOL#z6whRy0<%lQi#Is!- zP>DB(sgMK%xtDh*0NPqMr_1@-GG;R`$`_|FhzDSl zpOv*!owZ+?FJ;-Ifs9?E;1{0=idCHA`>N%XoIoGcR-+xB5;=Ih$Qk3GeYJ>lJQ_nXo7TbN?|vNl_vm;f&U^$IL8 zXz`u?66M?I>fqdb51d@Yj`qtg_97JMOi>3eAP~m_v~skw0t>kModZYV>iHI`*46cc ztLsM(_s<#lyOH@%>&NFBCZ@gSR%^z{DKm>@xKNQ6^QPu2rsiAb=G*4xyS7#mTZ;n= zGk%sX7w29uRv2K^KPMeN)qne!c4ej0aw*3>2wQ!d5F7(v|4%EN5EALxMqEl<=-juzMhl6oo52BcPjjy z0{02hVs>%T$}JLXXLtFm^g?tda<6)8FS@>;62 zq3pDa`(dK?cET?WoNmZRMqWPUMgA4#0sOq+PEzb#Ug{1VcgQSIG?boqP-J|nvXQE4 z&QUk#sG71*+jB2_a?ZQ5PFg7^oz&9~s=6!xte18(-up>h|8{cj+q&%cJ@xNLt6zm( z@5bqugVk>bQs?*@4BW~g|fEfc=;bX+byH)ML;N`!Ls3U1fqTy zXV6Z7#OVUAShOo_0)V5qc6EJ=#k@mfKKOWjq)@&!c3x;0BYTh*>*kgl*0%fRmaC@b zVrZkxE%&V~Wj59_duxTAmCW398)-aeVmNDNv}kFzW??Ku8jqV8j3V?05xV_m`dvnk z8}%P@G&M@?lIo-8r&9Mv%g^TXPZr41IpCg1vL&)yNR};;6sttlCjN962dc!kiq!Wf zxXe?85(Q{&+@{&Y;ZSx*tQS^L00v@ z_ms#wD^y*D(&p@acGhk+^@y2u#LGJ5QjWO99d7C}D|w2QI7&|(W+e^tQfKS3c3LUB z&DkIa+^@?&ZpzsgkaplhP@f}ffJdE4wCMkwuC5*pmEqaP)n1`qNCyyRquaf$9$jN{3O_+1cEVr$#WOlZ4dn>uUjl{|J*w%c{!gSRXa5b2< zL@Ybn?AXAKYczv2nKm_^G}WIlH5f8}I$)yH`Blvges#m_7Pf|KWRGY|L$%Fc2X;M!BA=qOi$Ta8UVq-7m5s1i7h1%wT5%5r_; zL}UC=ee6I}Oix>Ab94IaV2)(DP(5F9F-B95mL2s`mYNcK80qu1701J+vfjMo4uZHL zW}qf(uNT598$K+xecfTH76@}aQRBRlixHN5BXMTTkI(aC^Qn@xP&N;hK=L9L2635D zT^%v~{V~)1F{1ugtBq*~^>|5RCg6JBQ+_kVd^g?kadGaeX#3mh#uxF}#~H!f@ye@# zs`rCIjMBfV(@9es1;%wP4PVgJf+znWsP!I%=siw#MlCu!i9o&PV6*OEyL#`yaRSx9 z41F*Bzi>rgVo(_Jt+2M`(rR%UO0U}`8t=+BwLeQZ31)E`G0j3M><^ffxo z+}lIO$CD1n%G5JuC$rhoDUxi4bUaIuErNoHC>Ifxo5a&y!u1h^5~saW!ch#RN&b97 zzLOKbs0m*$aNo|;zn&4k09*|$=6qf0WD+;fyfIV(R zJq@A@QdU}fzHC)}m?^&PZNFPs{QLg$ACks*OBKrg($m3_@9ULY9pMA{75m*xbwBTe zIJLR?WevBWsYM$k-I}g8aS8sc0`H14_rmID#XP^Jo+#mD+)h`Ttc7&iU2rv6emlZ= zH(mE(w)@lE%%_=&kJC->#yRiCD=+(sFMIr%Ihv2aX5pxz35T#ZIFX)c#^^o78R)?4 zfJhIu;!KTL&UUko;B$4{wRhNcu-kA3HwOl^iE`9^SA2qUIYXf?&@R^))HND)1E;Y& z_VaT;HPmaTo&ANSwbayd*Um=i;HUyzt*zwN=7)9`a$7Tr6*N$YWw=?PrLr+yb+$Ti zu-Gv}2#s|o5jvAd=$sA4;W0IwG=4N-V%;7*Fp+vVk)xO_J)O%wna@lY!WVZz{-(!BT0R$$oQm!<2UPznslek{OcS}|8|l7^XmUXq% z@J`(Kb93R3-NfP|=t_+I!d|rTVrSbZ`#qHF{))RP`o~GiM(fMw9P&QD@n*CIn7^9^ z?#)8?hs}wq%YVC?3vY2@S0%#R#`aDUp1 zp2~nuntum9bha^Jt1(^DN;&N-IPWjG9H70O;Jup^yd78^?Ils4R3ccG0ri!C^omOFw~_OJ|fv5nj9_1?%nBNQ+L>QM(?Ar zviru^MS(^uQO+l57-yX>FfKP}7r^zcoBJ1cPn8DJtk2%z)ZXsc(NXDWe`05SY;SdJ zV}4+5u?x^zBKDDn%O(bMCi>IH`m>hC>vm=b4(5ASX1hiP3&wggCVKZw1=3&!+9;&% z6aqQ&qIcre(G*TPk)xW*QBG4-bA;nrl60OTo6nR9392o?6&9|Ln3()VmhxT>G!x}c zP5F9~`9+QUa+dKG>h(0^>sdM!?$4{tA6KMbXO#CFmVQ7KyBj$N#7|H%_89mh9^r_K zJA|*b>07K+F*kV$l6D%ib_VkgM~h?=MY2(bYNX|MuK8fh(;qB|&L~bc`D&v4?Lyhx zVTNqfKc_HxuB!B`hozo)wZci?s?AdL(r@P(Z-upAcX$4Ix%7`y(QnG0yVdRwi>Y&v z&D2zWv%tQYW}lB`zaA?6P2^ozW*?L9%jN_$R0e=+eTW`9S`$855iMfI9n|8K9a$$G z`S(q7f8|ww_3aSr-8lclH0>5PIqhZVBWe5mgjG5M9d+L;X}N1@zR=T2wy?>wbtt#9 zFSW9v+gMeb8J8e+itH_h9j#^^tw9#ET4EhuXS*+_d+^<;dYZUq| z*8QEU+ZWKyXdsc}4)$kG&MJ899c9+G5*tg26(DMUXpY!L7>W&brww#xVAF1_J8fpX zVujqcMsAs!2u%zC)Cpr<7U<2$C71 zY&P?F9xq)YD8#@fLRu395vScslHN))KB}_s)cIddaz39Bznl@iT_k^11GMRY@%KyO z&r9O>vz%WF@1hELcc-?#Pf$Z{@=9sO9t$tw~g+pI7PMSQ5~h7dcrGvsjV4#>hOZC7*QWo_B(dsp4j&=G`>w-E_@0tYCYp zuZMFK18Gu0s)TPH7adz5vwAny8z_MM5LdoGMMq@58m`e<_PHwNU-q#q{cUbRJ4O5F*M<=zTgTm2H zW^Hq5X|r!>v1etmWp1{KG!Yx?PaEk?=)oF5f5g~e9Eq4WGZtGQ*P%T|=m9}7i_{0w zaT3mC6WuA3C-D8SPxDyZ;Y_A{s`zAH8;Li^-E+B;M zFzJmf^_`OVNtO3mMfs#8+`+Yak@Dp%{p)$gHz?Ul!uL!3kMpcQFJ3Kl8ry?*;-yO_ z>6NfNWvv{ySB*d5-6uAjbW)UE*^1thlhN|iv6_pq`q%UQ@0NzHX4~aMMbmJ~ps+L|rzD7hUY$(k}Df#-Bk@KH4SeP8hpwd5bC z6W{h*ejE<`CK>-F%@VfzcIMJQ2&?zIQkSZO8t?PEj8R0#P(CWY&Lg|lo52m}=0wfZ z#))fd_8ar09XaO%B{w4#ug9xkT75fFb30V5?k+kTU|r4jd|bkxw&2zEPI2%*1-$>W zhmRv|?8}@zcqnfH%Bv3R(~NO%c6MrTvK3gHGHek%)V-Wo?BuxSXt(BMzkcsvcb0-g z4R&@I>@CXmE!yoZ8pMchA5m^+8WvVdPEK+M+e3TXeQV1-3*aKmcPz{|O^if_hI0mb zV}^#~Mh24x`jZBFQ@}AHpn=j~KpM~AbH)18Nc|~egGnQu5o4VZ#FJs2M@`S_2IKc8 zGG(w#o-R;MlV!7jYo-*6bsj|hc*QFIbPETg&iO7x03|_0JcQH&`+ujPe3p~$RK)Ml zI>8kSpq}A=T;qSjbCLP`b=JkSH#z@-Mzn!LZ1f;0O<0hzQHnocktN&$MMu7(v+Q)B z>U4;HF(J4aYq_23xtW;1o!t4fp#JA>$7+9IHZ@1u_o}pi zdfSn_!VMXzH*!z1@}WBhwK;`$xTLoG3cABayP{WGQx00PlpT3$AS-%GuKUZb;6m*y zJMSyK7^W(Qj(=Bg|F(};H4#th(24hV!~;z?J%dyiPlj7av+K)N*Pv$i@P60lT`2bs z7gW2mV~3r&z`?c~>#>b;I{^6v3bp6r02uG0Q1A|D6>I`9uD7o4u;IBuL%q7GH0+%B z(XJ{7n?q|Wm|qXf%r`B}H%t+$#zqSOr=i}2q237icEFNl43EJOj5i4VNrd5jCv2)e zht!)fHJUaxm@v^9HGbOv_+i~MeqZ9j1XVRzaXMR|nxiP^G8OYg`65sgL@6*8A~=dO zPB$|kCH`U;QfxCI?*F}%^iiJu@t6ox?Dunk77w`Io!_6sziu*rUgLhdCcRyY9T4c< z+imgQRC3C4ZmOt)xK~4x&?}TZbkzt;Ji75K!{%^Xq;%;K~j`afqCrHJ{7Yc$efJ@vR5`Y$3-6E{Qk9~Nf5ZJz)0T>W>| z)*p(lZ-+zh82G88g7iFyIQ6BNEH>Rb<%qhp-o9z_XgpTd@$mt7c z91I=niGv)d{RWD(DHn8y>U;XB@T8q0?JiPHZ2Y1AzyJ5g_P1T4vN1yLuq<)X6KG(obSKnTD-#!=5ZVYx9>$i#Zkzl=nc-nEY z0V-+-1MXOq;;%s#rXA>tK~Qm~f$`q<3%SC0%IzGFEG&1C$Q6Xiw2ASgp}~})!K4W+ z0}N)2^v4m#z#c>Q3q<1rLLVx1-VCv1VJb2Q-VwNB_)WNLpA02>7R>I{v1LrWTcQU05B-tV!yjE)1#crfs?!s;dG;HY~mDD?B&SyE{vx5Bn3?9PQ z)6_3#Dc{aCFY!MwNuLjiN5c*Qr4JvJnA?`cbWt+IMHyQa#QieL0h50=#W@?J zophC}nrP=8%nR6{wX#%AT_-K;w*!6qO+FcTeZxc-uX;m7iuNNAWO*9d1|^R1lUB+J z`^+3=b0*a59*cU?&U`nq{ijUvH|5FSlv{r)1mCuBOPwxBsnJ3%S=p1VYJ=?lpe|PA zKxICtN9S7Y6AJD9YaIRg&Y>NcgaMDDsgVA;n3d_Y-CnW`G{ddAiuP=23;wXNP&u^o zoAQtU`|$Vw+^&7y#H$*U*63zfaBZWW=*GJQRC}d!{PWrZiaPvrAuhhpKX=eCbJQEhn#|(+{IaLX|Zi&JZEG$VW>X|h#DJC!YJ2^B5O^@!l8?qpl#|S}xvG;HXo-pPId}k9f@F?#JWm8eyHbQx zucu$`rNY1iZzBAtBH!Z*l#??5#~JC{8U72j#HVTBFG)YI$bjpwE5c`K_S^Xv)h)(4 zEHmQ{mtcCrRDSAO8E(4*w^vmxZ{S@HfciII&M%YKS19Vsq=HImE&I5RvssnO&a?GN zw)Vv%ER)@EjehwRs5rc3U_=l%D}K5dwr{z|_4qAL$|^lu-QDzYQSyg!^~dhj-_?u1 zBN<1J^l8-Z(xxJxbA=7B`6zWN6YjO-tZwab;|Wl z1sy?iNJCdhQ-5f~z)S8xuwXRw|0C(GpW(sS-bMHR^>-6D$iS0p0%hxYgSVMaCWLa1z-1z=RGf;_NqSW zR({k5URE&JQG48|^0?)pQVA;MyBoPHp5B$k9!z3@nO%?HMz=Sq7rd_l8w36TS}@)L z<5>EPCuh+eKnn!dHbs3 z{kyt1YTx0uNsiqyo--+4(+NQ=U5(&b__xL zB%7z_-+!#HWf$twmG96N>pGeovr+BTlj=2{6tt4>x0p|u$p%b9|H;yfVx>y)R~lRfn#`LTOq<(m z28QiMCmg2Qou?{2*D49j`U1)D+!bl>hN<`|kl%1GZrB6DL65aG(}J+Of5HELXs&6V zf{(5={`$?TuHLq_!KSs%wzbus*y-5OW8d0iQ`2o;(rH@IV^!2|o;RW&GN9|zXPi3i zI6!kA-FEC0;yeWqCn;+EtzqLAR>%t!l(KSPKMctH5##3utXVSEN`~W}tQawaBuv#y!&a|}7p4jHpOLXk*avJP$ z86I#SA0~_qyNrxF4-GpH4m*!eI!(+wPb@l(&D(X)I`qtXEs!GF{NO1e)}5vCi3HJH zhr@wROt+Gu-K2LsGa!*>=}JSP0BgAP{`DB(1)n``d-kOM*@N%T9@T?gCzYqQs!v-1 z*Z)eT`;{{B#gi7b$8E|_n$@1xD?h1Ieq68oxLNgSo$|egH+tV)7Q137otfN$G=eIiGOB(Q{fU(`QH+KoFv3UcD{{u>>n0AXR;DlwY|KF9+ zTgviRaDtC{0ScCnf*B;558Gda8dttiE(Rz2uU=NXepdD2ZJwS>hGkm3LsgtxYoZ4+ z$FnofvnA6pKh4l58EKw~k1PxxCq_6o30aCE*e(a5qEn3Jn&3}s)z@mDuu6wVLGIsgN;v>t7T_~2SrA~vw29)r&W3J&$ zk7$~E1k=Eb4%J*&e?6`CtW)_>vnq(iCv{IBH9mV%^XOqIXmZq)dta#xgAwdYCkPpzerr=cYqP$TrC`Qt2zNbz2UJ5T@du178LLRn`+CI7 zKH_D`xoHx1%s$6!V8p+(wc_8Wk?bQKkdqCFX<|J@R^5iaf z1J|pAP5(m@Xk`5*%s?qUP)Y;ku`d|M%IQIJYJi;Kx4#f|v7sGb^_P4*tgq4QLl!cM67^{qP|hrJrvWQQ=gX?>AN+vRIi&{uZ-d z61tRmraR93t*3DOD9G|bC2 zEy&dg%s~VDvZNe~`VyO#0@u;fptbsl&Bkb2eJbmFF0Vd!rzKO+lDFTMwcYG6kZU(r z;=!o%=C}Co_5^Mb!?xR_`HfNBCO>AK$6B#de+twK=!U@6tx_F3#~jD|T&9QJ7lu5S z2EErt{m3(cw8a3%QV4H7OhAg-qeKd6ar=x6F|$I!>Nw?fUJAM{cpaC5mUBVV6~9u> zeXnnYc5+K3uS5$k4HBl5;L&|%p-avoG{*>vdoQ2ExMKzNEeYQjh;K(SNzaf33%Rz2Ap2;>DhG2ejh$n)dwp{pa0TzH zgb^ucgvf6fp#0?w9~sT(nC&B63_n}3_}2gEUgS%a+?Ov3U%x4TrB?Jxt>oRysy8o6 z->T-me3tp*Vb<#>#UEaGzE*2|@hA-fEinwOb?s>I8Lju5EC`s(2_=0^Vl{jfw3hAm zx(%eePbLxilkLV++oTgqC#3A{&e?O)*bze~ED1))&sXENd_y>e7)@`FqBSHlYSVc284_Xwxz?gO#iXymgYVzha`3hQnxph9g zdT-V@KUS?fxx{%o%c3&wH590hY3L+YgSXRhtjBq>&tqZ4YjxCrV7)#R-X-oNiJpsX zfopBCjE=P3!IZ-hhpJpH%Rt?VY}@&7u9RALX00cy+K1od!*BEi(6XvLDHZlJxt1-- zI^Ho4{>I&T2sN$gcN!gani_PO8F60*dPj3XKpBa*61lw=vr7V?CLhvL#PmEFqeQ{3 zI^pzO36_3rk$>%M{@SMg-q{4-Pl4cn4hxq?m7Z!nd93?N#RLK)D4~mn%;qPswL?hz z8TSZ!ST2(g#x%93BjMzaA7@{`=>ZBcFIC!Z`&ZQ#0PQ=q{`YF*uT=YAD0jS427PUd z%Ckn5+xN9qfMz_x?b6|marvq1D% z>Tq4{bzAH8piQ}R7Tkf)hDpS2w$j_qxvxd9U<`Q--4GD*+>mnwGbx3928$^uLuk ztTs8U)e|VS9<1*koF-p>qZj)-fn4k~muoYUjgE|ct^&?CUf)+UuSPgp0|L^3|Oc4@24Q@EAQVxh2!_M;2S#nGggsPR$u#EJL-KWD-sxO z;FR5CGC5!}+jTT1eXDKz2d9MBJ$ODp$YH*QSA2#OHBc>DsCuMLlWtIpVS2k&eUDj1 zuR-CEN#l%t-%8y2X2BXeq={!7z|}yK@7x}!={$ZCiwvo7ns0U_b-2)4y*PEA%xW)A zr5nA-Wg*L^Ek!3L`uQ8cF?|AFgOA_aT6e5EPR+ZnF1V9sy~%T-{M7^@IrET`c1X#R z&_I}el`+eX*^Or$;+3H9S^#n{_2&-f*ADmhF7MYa@An?}AG_P&kN+jY_=dd0+nZ&F zSyhH8VN3e0mS#*x#x16SY2=u(+gij|mUjZv%#x~&*!=u?^5v`c=PI?&o`MebyV~=b z*J^DT=rRx~dH-tYrAq6I=Z&w`T3#rFs<`gO(>k>$^(udVd-yEZy01B!))u_l6iaE3 zXY>Y=iG+m~hpASFsWyjcBDjEd0*djg-GudS58$-JTl4{WcyA+8Oo@|HBBiuQIXeJk zV+q({V}?lCVG5R?jP54}ZSJz?`q~#bIMXL;egccN6A%bs(N>`_8cc@`2gkqIZItdI z%1DAVkfRKa(8db1(Gl9{7-g)0;|`EGzP|I8fe+Oza>zcn&7m$eU_Oh`8tt~2StaV< zx?*OsTWSAhrq#_oc~|oVF|382grOH8*m!uIm+!izT*0IlwLp6&(H+>-qQX$;Nx7 zyI`&9^-FC(r!kt-(z46?vfJje7kwpsXD#h;BVSDYD%#AGQj6vE3I(I~gwc7y9lhpH z-|#km3b;Rawtnqy{T6Qh+Ts7+<^I~{-v~tiD{;-s{bXiunHOYN6Rf0NGHAIpYce)& zJTzj|KZuIxaR}H*C}k1+=vdqu95(;q{jjPEsGAxv=IP!3-V>kwkF$aB*n2UI+*pX|9Eawv6i#l#s1f>u@CX3dgB-L z02DU`(_PfkU4a;EKy_&_Jr)GZ)kF(4&^sE)ozJLU4c&c+u|&f}Y=jpP^p7Ao;r$0r ze@s6yDjEb#XeK%|1-RO2n#DZ0_h(P|)(`a6?SlUuu!i{I6(-nemgl;%LD*RHpsjoJ zz!e(htCapt&ip20Q~^YfSWPGNwhLC@C3pIVVEw0n{d0Tw*WTgpy~AI7`@eZW5<36>P1kLVKB-fESo`v6lj>s-uT}Sz^5HR6 zUh9oPt96m&c2HTkEYv&AG&xPSIZwB{EOihTiQa1+e$)XEu+&c;aAz+7H|MZ}&FF*8 zB+*8+lo=-D1>KI;nYS%0z*WHxJ!1LDnBKslkV}CY_JTPxL~{xTM9~o&Fw7<#+^%S| z;W$1VCqUx&kh&s_o*1n!#h4u7%+7FTmwNVBdNu&sGmM!GX|#vLb2M>74sBV^?LeF$ zF=eNnc17tCjt-p7jB!}6P)(oULmKEAE$kYA6QWOt>2pxV9JJXM%y1i`zXvrCLUcu% zdWTwuB8Y)R%S48>KGtzKLs(p?qnUUA0v>bk?>});c^imL&%;J#KYR+7gq4-c6#_ET&c{n8YJ?_X(%tl-+g0>OKXaa)z%s zvp0P5&n*zF;-7n`;Ew3`f#UbR5TxQ?JG>v;^8b+*PxopEyE{~e5QsiXs2rl{$dEx- zFTShCpko+c*N2Fyey5W_NMFuqI`9l2K}-tzomjmqN&m4^)~kG?-tD*i|)_ojA)tk(pSfTeA<<4ldqLbJtd_hN{cVK%ZJkEMja+l$K6>oo?FXd!nNcB(pS+&te6@s;{<@MiQBD2CK&I8{J|Cc za(fEBMMYSSgR@^4d=UtJ!r&x0avf-WB6a9U92cd>L+b7#^}ypQLg6K71BJHnk+$gx z&iWi@b)ju}u48$MGMA!t1*R5VKE0^~VyxSET8(0YdcIk=Kf?V#-1O?j=O0=i+T&W- zMTjm4QwGeC4a0L0`aHDB9@2Op3e2-jB`8xl%uu3bAc7i*A%VHVX`b}zm90ez4Fa!XV4#tge z47d&DqxFHX(H;ta2-g)O@G_+CF~%sDSCq;YP=BJvl^Ip@K+voGvf_#{$v^m~N=vxeGSGff*>+ z`M$L}x?N}j&?U7vAz3qd;5og|8tuKg7w$V){hZ@Y@7L%3fPBOvntiJnt?)~NdYo9gq5XAjGt-7kQ> z?{l=HSlUtabV<-plb{iL0VIPS)u=tJf2vfY3N80oX%E@>PMEK?nW%S|Yj$32cAjr^ zU1;`PZuVVo_1px?;=}HY2>_}GciMwL8?w6`C0xxBt+vXkMc^Jw!U&Ks0YMQcX9dcb z0k=m0Ot6~jC!rZcFKE0SKpI7?c0^V9Z+iN&(7#9+4R}^H^6rQouv2jHkIGh=~oUfatzkv5^>Mm>P zQDFu=q~Q+2L0aa~qv^L5zZxQskXmOHjz4!$_^a{>B*9uMn8qfdXdm z79(nxmM5XtD;R@ktnmwW&oQ%Dv{58ltv{o+p0kFo*b6t@%^N=bn$N!BGk*veKew2_ zb_L+O**f_5L5E;ozbMFKFv)ibtXtnMn12A<^h$Tow||N5fcyYTHQ*+!dFS?@KfA9A z$3^73R&w>+cHg`kR{p!<$-TS>_fsC-%S6J)ZJepbCTn`wRn7O~FK^fX>t8-^RQ~JR z)7OQr6Rm-3)y~s3HWLlbbM-DuO^$Od?h7q$%PsCJZEob=+oFjv>`oi?WY2gD=6tv2 zLv~jR#p@jkT9u3uFQtV@8K7qkl+nS<>T`=L9jvDMODSgAE1zF>Bj8J5;RC4+;N*c5 zZiMz08n>^FKSblDC?I2GaD*{F$5~!tt*&%!FL5>?10U;{Uul~&wQaL?JiQGggUoV* z?Z&g( z2UrY(w-)?QhTpvh^5Uz{{uNFvu|J;`wa1Lup=TaYDny$N2c+WN;sTc=mG1oQ zbVt?V{#)mJsLO4 z*K=VHl(GyQNv^Sc3rn&tV*bM1#Y8o69oM zb)my`k?6GC;&X%sd$_9FT}2y8rFU zI2GL4c^^^ml4&f-nLhdum8H^Ul63n>g#rK4OX09S-ID8qs!EHyU}U~P&CaqfzpYv*zUT}078~P?saE^NS*ay&w6s_Jhzqt zcbAh6*7FZm+QsXGN3=2-4KzI9@Y!EP3Y1a2MKo_QP^AEiZ8W>qH7)gSqz)N{Wuo=? zNbEKey9cz5&_FX=UxG6^)-gH7TAb-wU+Ozw856E?HrKi~S2&9s)A(ikhGM6-5~t=g zyY@J+Gu$g*B^{Bc7v78&Cr_%$N%^+CmxbA&mDRhPzPk8STT3 zL?{!5w%vJP&PC74@f7W-d-Wu)?83nF5@me~H&HEp#T5dlI)t zBI&(llEqlb{PYcd;hHh`gDw0ipx-c-u4uDAn7!BZjtd(7hk*4%ApLLY5NFh;(cgD0 zI$|{=nI5I|;BBC~TZp=M=sRcsx0ZpbSg+T5KCiI8DhQwF8gBQWnBGEr7u+m>n`%&+ zt3P;dh%ZUC1KYE+P38lori0}cT_tACUyUoOa0wl7kKRwZ%`e`4yZu5At+O72rCWVHKq77}`t2-73s*Dumve>7S;Fe26$s1DZ^)<5p+a%?xjLLk0Q`C6poA01HrnF)CDc+p0%Q1qX1YK@B)iJRf1S12^7-863jQMKDtl+(ZU7lEU;A<{lTt4QHKm ziV4P1=gM(Z>6NzA1;qFWZX|)=_Mv+6SL(n#;Snf+fo0>JyGHjP*a30aXD_^-e{g%L z?(;(3>owF%?UTy`RUiVd^V-PAwWlX}b0vXBGAV9Cxn?`I)+Ha#HJy{gdHr?AD@#9E zOi(oa;E`_FGuJGTkgH{@IXh#kHw@YTl}-pIeA*(tMq>P@65`i$bJ=N1ukDhw;sPP@ z0b1#S@Vrobb%I_&EHo+zo)7{}4Eo^ee^1%^_B8YM>%^y8PVI`L_4lZ~zejb_b7 zW<90W!xa`irIsB9hD~`Utzey?!nnQxo!wy8@ZEj7#j2lZHPq-lUF*JB@3GkEIp5&E z)Z%`dghxF%3k3d>J7*3^bNOs9MC>gm9IPkpFU9UI1nsW)?ym)ar6(C95F}wKB}hv5 z71KQqn1Lq@mq9u>F+=LGkh%gC9%NvE>n_@0PuKj^(BZ<;^Tyoc%F^fBKJ2HZ|BZ?J z4}HfQ(8Xd5B|x$a38!cyH%#@$Ts)Wj6E}jt&Nq&cbDPI>O$M}3n-Bxg)o@^je7GSO zZp?!l@!*DANE0CfBw@2dP!A)F#h}kYIEc|^$3aQw6LbabP)3)?o5oL_Vy{qk=TLpQ z7FMK%Jyb`s{<;TpFQ`EAcmJ|}@WfN)b@+SD==bQ5Pw3Duh>$P15Qs&zx?#wB3%|F9 zE)Z82{ft1ns@PBZq3>}18n&q>X$2{peW9e5Xm;Q54Q=}ePxu3nO zh&F7E(*G8w=^y$)?a!^j9e^wJ>02Kyj}*tQDv!|y+nzE2s?BJr%}BX*f4Ny_iB)^9 zWm~pId#*uKo^@L#0VwNrG+GVUc&s!8thV?rw|Ihjc(vVgy@x;bJEV zurr^qx0o(mj@n)H-C6M2C3)|Yd=EE6#Ncj+>MOY|gFO#v9zv$yG1IXJc*QIsv7lQO zBK3qQ{XLZaA;v(8H$OLbzp@YhVc~UU6LRI5eB&PX!_4zW&+1ag^aRjMC_O4h7Z`$d zLN&YKh!r?&4O}7Wz~>B%*1?1TqQ`-o>>!M{ktSOxQ}7Fj)E$J;F3e~bZX$#lfoyyL z3S+2&3<~OAyxh>?xT^Jdg(KsMWy5R70U4KAmrIoS85A$o!UEz#{^&{2?c;iT_h|WC zCHT#!I89`#mO(tiHU?#%h;og^N5>lHC*lhujjLm9I-+elLtXnK-MbS*XLBM(O0B^e zK~#%}ugfUdl>~C1>Ol`=qP9zxTIXbond5^_}E+)jTC#N$C zDg

    Orxvf*@pBRN(a2zMY;D%6GH&WWAOcqwZLXkwmM>RO`NYNO1U{mjJY1>L4>i zL(+Ywx&kLVJO*pLXPOC<_144HwnG(m!{2O&sw}%Jt$VAi`o7uqHro@MEP$BscrCaY zjo$1CU2F4OZV4p!dI3;ba|Aw6IGqpQBPSh@frL}Z0V!L!5-ON?=goNUta$?|wnIwL z?O_&(R0g=v@)6VBg>1iLmTfIl3ra`gcacC|Sx=0_0}4Wl(LXYCz3_;?3CO#OthkJ= zz07LAj4AwK>UIO3TWu3L0>_2I=Mjhj7_=Lqy9U>#!m$*XE=dbb(!$W7dR#617Su?H zFh78s93o6a2y+R_Oo}v>!A-<)BO%maTMIBv`T$xf43tRVr-9Vj=eWG#c!ez`?s-kMQC{(g$Ro78WSnq+`62^`cVE^OLM95*^!< z9eNWS`{RNa)5DiCqn6VOd6k3W&XtS7iHp8^L8D)9jpIm7iD+u+nnAx|f$G;fHWFrP ztn2TDkFYZ1wkyNXh6zjPhhv`hS*7(Vjq(eV5y8CqYnF z*-h8mPu1H_e7B!&a++&$8167@tTQEkvz`2wKqba)b_A`q`meP4ll$C(DH3Pdg$>?R zQZA_M#q>%MrS_0qzP}P7nDyk(`tL3W?XCD8Yy^s^Q4)H9gaJegybfrd`(Po4Ym`LR z)S#pA`)Irf6iO&v5mHZ#Gd(eNy^1KfuA4s_;+-yvPFD|48%HlqJ+9Curx-&q0t@!y zXJPP3gzhF%pNZ6Cz;QGfjsnM0VR$CY0Oa0n7w$l z1>EoeiU$nh-Ywr`bfje<*U*z7^kr5~r?p*j`k{<0IsP_v?wWXwv;ZM12e_)kR{k`Q zCVxNldif#wBjPIrp98bb){jduD~PeHig9R+aPErn905Al@hKZwIngSDPGemGL(PFh-vcM>U1yqY#v5#BTI?3u?HAgdS9_dEy_TIs z!|Ga-?r;7pO}UJo2oS7G09T?fxd(8EUYx~1-l`{mrR0#@DyFuGHi@E*@4}Tx{){(& zHeqkMO0tn7A}5F_$)e2&3Cs5okP>uX5z~8{i*Z?jz&L>ZMe2%CdQyx52wAzF`Gu|j zO-|eS1oxPAbi8|hEV?@Go;fpcyZ~$>mmYY5Cd61M@@p&)dqNL@M-gsdL;$wnD) z;rap?eg_GPpbUe3v-6j!jml`_iaL_PagB+(5?{9}W4GP!)znLOKI)l!|g zJ34nk+yB9*{uWy1XK4pHSXYL*wuO3)#`#Sr`OhUpZDypg@-tY)75ri)M1GjbOt#Tr zvTj$TUT++}Gumh{#e6)?d^XpPRA|5c)o~@uZa&|rK2;43e79f^zgXD}w|LGEMl1}( zOtky;*8~lI_a1GuA8)pqZgW`fa^C21p^Xq&<0iy5!q#_gUWlcS|K57*}F7)jCk09P?eA5i=Xyy>}D+(qTU@yfP*??NHJITD}AD;kb* zmM1z!G6a?nL6YH^4J3|&z%c-p2rL7MX9E5Kp~poV3Xld{fGZ zQq8Wc=T^?`cZjaYN542nKbc$S^OU2$HsLqt)&j@jx<yozrukGh$g5C7WQH3JXXvbpSb;av;#Nzw1jfaZOW-DwL zOKev19XE;{H}Xsy)8C*X?kG7tha~`0tFVoMwAJ3E`F8hSU?)@^KG*6rQfoWg?6ltN zL>Y8p&$w>QS@pJ?)YiI>RAj7o#Vt2`&(?U)efL>v_9J)rvc|whI048^bJxAuE2aA& z2~%1R$W{BK$gQRD?Um%+^#M6m_-p6jw{Y=<(423^{VVIf-G7PhUz%h~f zEEJxFz_L)FNyTyCx;%{G7TRbRVX%)hIYgVwz+eDlsnD@L##o-AOpX!83WTWwFcL6h zDb)A~X?CWif1rsyfa=LKbZ$cyVW`NcQ1IkZ`47d`k-V(`4C8QN9Dbqi`TMmx5s*Ch zA9$#}iT;2{hglS2Bg@UIa)EWX>u{#$L>7>_jU^Z6Fe}U0HMQ*8c7DUsVUOgRdi8tf z>?fChIv}kJ% z8E;ISCx*_|`^?sO%+>lVHu;geJ*h+P>_vCM2CzwTW37a5ld|?UN`z}Ud#gdf_*bwR zySp)|U?_eIFa9a!Uv3S^S%p$ogqR&AW~GaGC}#!?wykX-*D*fA=mTm=fz~}XBV0rm zTs2J}@s8vtzZI9iq))iPM7$S~F z^P0}~oXZYg%SoaY=W(j*1Pxs~EyFuatdrTZUxJ_i*gw8uY)bmNwrdlpIn`Tb#iVcA zF$tkF&Gkp~pf(o%kGT7o?({v)G~dmwGbm&(DV~y@Nc)<~C@tWZC?WF;4JMoMBTYs# zMDxWC%cV~9*%srGdVE_ACbjalZq)s!Kp@u;xUAn%0*1oA_n!KjbvMMahmu!_Q8V?P z1C=4ub!i(N(WGubeL1f8IZ=n4*>i5Y8%~SU&I29Mi>=Y~P5v|W?o;30rfa+xn{S(( zwLSuMlE7YbTuwC93rbiGX1ymoDQD+D~E~p$EpKsOt6`b;U&1U)l86r|n5~C!8Sys!h zpE&3wD@LR@)T>{@AHR3ySCkcTcO|zX5u{d5Y1LM_MO`!|G{Lp2y6a?R`yX4v|8uzX zdpB;e&9x^EFcJ}@j0Ada55ivvS!L?(NEW3tez87ysyb-8I)1e|Zk6c2(&4u_q~c4gpnfwj9Z^0+kdyTTK$v>h*zHUQmo9piI| z@d?)Y41yPF;>23IA`PqvZm6gpl%D@v`d|MeFR40yk3I6sJ$6sJevbirPv&>;dA(52 z&@e4Q`Bdm6mf5!E5ylEU=W_fvzQ!<06B)%RjFKur{i39Q=W6ZbC+FtZ-u2Jzqbu_4 zVP_7jD2-QCEGQ}8s_>hO*UNF%4i2>|$f?*KCI4XW{%c40{~nibk2v-Rg{-8;Q9;P& z=WvUZ{DwyJu7&Y3PJ#k_Jn%(J*@62E2gZv2(8w3B*5|LY@7{9(8(FtbFLwc-Y5gTU zH-2|4lir;~YKdBD2%h^Mwa}12B1Ug?`H(=})JNdX0`F~j_=-p0V8LpC^kjo`cZJJH z6=A&6akSiVzR{V~2R7CSl<`|==@TB@MUSnOgu~5z5x{jJaBCrGXC+*?mH;-M1S?T{ zNT_ zED(t|$#Qc$xw@{xCi=u8^yVXa^UfWU2akQ&!`voH4Iq`X80KT*a{lJOIyobW@I z_YU2Ov1Zsg2JvWl1uwk+x5w>7?{?Uv{n8;Ml0THm>We40#jZ95&(#EsS41v1C2SC* zH+wvROXS|Hc@J4tdC{?Eu3&Q{f3??pyw1A2(x#`>cCf->tj1}%!wo3Wg2<+fJCg=I z=wqI|c|Y24*ycb8Z_bT1?#7-1kF*nQ(uFk#ZYjNiDDl>6&<;6FydJa)%%5m*^fp{) z4}m>I=}N%>N5}9)*YuJQaWT!19h}I73h~gW+|2P5X>bHs3tjwy7MudrWx{YQgboX# z$3x-&;A#Xmp>_eN2$May0T`Z(0j_3VSMG@yQAHQwB^N=3mrillW_}l@-j`Z$2W{fP?t` z2VO7L)3hv#fQvagq13oO$6+X&Fq`YXoEc8dkEMQ1U=~#Is#nB)2UjG3>(#H_o8No# zYx=5UtYW+R>vlytw=jWU5JpWmFLu$5x7ACv#fIDK#kzR4$5pR>FC@2mE+hwTB!y9P z;#g&A{4%A0!NJ_i{bZRS-yN#M#*$uDuO^}4tyaO~2a$gq zyWvkUEXq5vPu&)tsN3ir^SIV&cY=`SioBL!fVW^>+w^SjcR!cXlr1Tm& zqZ*u}NNHsXS{`>ff;<&+N;l4-sjE|9I@<`HTdxtY?1KC=n*-_5!T+*-QcmGZXBMSV z5vK+g7jT?J*GOWhzpsH{fM*p7iYA>cwEiB_U=IW<=5_)Ph@nHI)jnW=5k_LH^@&}` zbx7`YVb@vn(rGXKv~=*oHR00C|01a5Dx&h*J?q9OAa3QU{xoX2uJ=2E;? zGJuqE3_UNCTbj=<9}~83pRJt!1o0{aA$$Ilw=N$m;+JP{S7dINXKYo(G7CdT6I{Lr z8D$XklH3dv-Hg**ZOYuedLn{W(u2s^VU+B6PD!$$0>tY`(am0loS&-TXM#`8PnL3{ zM4U)5D_BS;Fi4hDQ`q7jEr-_k@Un*wffJ$Sy*GAVOF-doIAXIckW}w93z*?-lZG^} z$%^Q;j;yUAH{$XO<(V%ZnIB*A{R&ok`J>;~dPAohY&*-WI?HXli|qz0oTeLH=85)w ztrpeQcHPxp)Iq{j4Pml){Aj&jwEmSh-hE7&x!~1`R`YhIx`orF%$aBj$!mlC1+%Gn zYbp+O0S^#32@pa@V&zCZImY13!u>iT^|b7}Jh$-J*6B>o@C>RWGB%fC^|rNu1}NAR zzg>U=r7!sQ0I1pqBBbFV*snn93lYX(04LG5RM>=EMiyRuA3GkQDkx$F=}=KIcIuLJ zl~{i^%sFjYKTB@DH1)egSfA;6TY^pau%K!4bmn2&yXs19pV1RNL$3 zJ!%Muu>yOXS6?zd;0wRl=i>5;ZF<4dK@Lz`^dn^j(+a~`Whvb9WM)O1pq_g&d;EiQ z^>g>?=g#%7Es}h!fd4H+P@cI}nZT_s+i8lLO7iK6u&ej6FA3I!$nb2DUnM1htAxv9@#7PjK;?)KF zY3IgH*G|5dNd?DAc}EsbXBb^M47+b(Ek|IOP&6Bc;UckMYkU`h7ozp|F`!j7kf6YV zi=h~8a)>e&qm1O*md92BH{p4gtqVu9EGbte6<)~J_7xe#%e0o$rL7~fJPSFNCo=Md%+x^#H~)s5RJz`KkJ*2F!ErKMj1Nm8EV}^vSvy zn_Fz&Ti`U2<-VBZxti^>nH9yYjOLc7@v0lQ8p-kz#WmyVX8ZDo;N+S?mW`Ee)nour zIh8=rt9+*+hFTOnl{kFZO}<|6?To|6IhkgiVABnNM#g;8?DY57WS{X;pI z!W0=dO~Ff(ag(K-*jrp#k%#nPA>`0ln7$4HD?SclkYZy0u(kOeZ5@XU_mAN$> zN$qf7Z?RdZv6(3|>&tZ=Dg4SK#t zo4rQ5oZUAepV?YK3lO!3)Dgh}A)vF51PnV?hQcYd!4qq8W$keplXd1BbcQuP)xyZ| zmNEw?@fR&ROq&Njkc44i!T5Fu>OkA*5Mw097>fb4f7+Wvq>)71;@HgnG9dk|V^Ogv zknUf~F8-xpOXUrVCpA+?8+$U2Ou-Z@YR69vJT6fdC&vEgFoPp4yaHx;tPPqXhfBCV z;1?Ad`f`Y=Ow020u`chCzrN_8zg*auKriXoY2cktPad`> z@rvC>6Aj`#FrF4xW!|16vHmN`f#i&EMxhd+e>ClUH%`n=l=I`I+(Zc{Ny3g5u_6wc z5r>Q*AYhtjCIMh6^)j zon{UzFI31d%`Nz+ZHT%6qPg|yB@eH|Nhp~z3{7#a$RX6`+X2_drYyIPEQkI$|JkoD z)#;91iPqnv?FZtcnT?IR!wvfrxf@NPB!NzBW=A?1FIX4=*yJ63u`C93Cp##CEnpjrY5}45Gqoe3-T~R7jO}L zw9z)kXivvbtYacY8;Oznhe!j^s13hvys zxO3m~!6V<7pHn^>eT8@yW6SbQ2fy0SWVkNpx~*k-Y-ENr@*`L!$^7bKLG9#W*Vfsh z_>v;NqDihc=cIjwJ2g2wwHdqZ6$jl>l&t2xrdd%}&U#k-Mn(d&FmmBLn zpPJg;*t=f3xt-%p&X72nu9X-hWHeR)0bAob0vL7+p(_AR$7uZ>jNv}kSd23RyZ>Ua zK#DMy{8@03f%P_o>8XX^Y0svNcPf$GNJW=`(3g^SWE8RN;7TU@3Hm4*APdvJT|!Jx zV3wx=`NtIlXOa0A{z>OX&X?eC2EbLzKnkV&a zkke4btLI!U<&bg$m*S(SIXT?Qwgckq#oYRTHb)f;$y1dMbum`e!4BOiN-ljXvF89$ zUYLXvCT538*b#@U=mTc-Av1EH5h0`n2{v6Q3s%!Z=H0!RsLoHQ8s!Ixe?1L$=&#A< z^~cdV{plTqz#TX$$x+ zX&yW^JC_6pTOyTQi4`}J;~Ob=UmBZxiZnZc0K2Jh1=xnksyK_!Ik)vZLm4TwZZ7~t zP|Ncts+pkg|LeZ%lP7*}KE{1A&Oj%p8q~#`5)*C55}oE!2xUM#m9;F`s+ z>fCQ$kn}T;X9Z_VtFpn4!`6!ZrnIf<{JoCV)A_w08xwm#A}}v}BQ0Vxy@*q`ARiF_ zW?cMJc=BID^6&KuX;&PlIcTF!$#q~p{$e{!!VML3{K3HF0Hj|QV0I#f^zc1u*d8TN zKyqcy*^?&?D+b;{Djwd6d~g@&o`q|MXC(`Ib65jFYszi0$!@wlV5$kOM^S&rLuu_I zGysI#&`$!8inY}F8Xq|t@A+CExnDkTA)mKlpLbDkss^UXs{~l26uPuz`pgxEvfBda zO&L3blP4s`C42Oe`t6Wv=)%(021`slByt;#1d3C;DAfPg(t9|yfoJKW*gexTeP?HP zQct(rHYn!=5+Y|XIS3FrW0C=rvxz2{Y`}oYIf)!ZR?b->Id}JLczgG4)vJ2{!9DWc zs$Z#OS9h7JkCVRhopTg4s+vLulhu>$4In_I(2ZcP_D=5^>^qtW^D|gh zs0)mpjDVEm?W~~Uz+{nts~G)IgnT4J+gdTk+DYIOV+*FNWBKhQzisBuz6c+wh(GL% zI_#)c&8*%W@!ws({dADOcSLnRcW{=_84?;*P9?*}DLDyzFHKJ%!AT%JiD3dS^%ww}V)lG$nq zu0*Dqz|xc07K*cl;B@U7_kM8Eav(9B%Jgr>OhLhxxa{lB{;Qr*^ZdSXe$)7B_A0aF z6UFr-;7azr>KMDq%l~Naa))CWtzA5(7VG`#uXY1qtoObN`=`Goevit0=|`qgCRmbpD(0-FBDf6OW;=v6Y}6%L%p$0z!d9DKL+fm`749Bv20} z*vDebBRLi!#Q?OA#2BOy^+@c?JxChu4186Pz-x-yZ+W3xSi9kGT%YuQ*a~YpqB4YR zPdUR;L8GW>G$o0wCcxcVsBP$4xEljS4uyF|Vcn4Jp~(uZn_H5V8MtQo-IUh9^K?=p z$U-7jPJ-VFhJr#@QXI52wwB6*r(>|8aSNr6i3n9JOGAKRS>Py~OeEJ^m#}v&gEtLr zrj$gJ2dF047XO&L#41Z%{!LZ$b@PCwYw9{O?IYRMnhfJyu5v4HgCgExAO~jXF%DJ% z6q2R==C`n@)b%(26#bA=P6&K~@GgcmLDZ+Y%*ITo{#4)joKRkF#6d~id1=B$d9t`R zM-Hs}%je3Mm8$kSO?R_?pvyeeYUoG(1tYWSezYuf_?shmkFQ|R-sKU7K z@Bk-_A#iN&McCYjWeBjzFXaBc$a^+%_wOaz+>5{e+eFuwokjAcqSL9kqfUD2tnE)i z)MEhzQ36syv{T~kpwzKuPdHl%_K^hhQ1n00g0Z3>NihI0QiS@ujO~9EH`N}yQXh5H zSuP%1xY}8|J8IT#xx^gN*%D_jg@cEJPFK;$Dl$n$C4u{e!6~R;H6(@^WK9(IHI;cs zbGV~0bl`-&qCS+gz7G$uAW;$mMGhA$C^Qw7rl#6!$@UrwQv-AaB*Ro^n99-v>x8#g zflPwvtHHx}mI=Hu&HcvR$HD^7>}aI8f;7THcfE0sz4DE_^$EV^B;RCY-?Du^;Muo0 z*BfA$*zPbha)V)8&_GZ)XmL(=fBC5k2-n~IF8F(74$7sH5no43uEm7pQ1UaF&FQX# z8UAoSb~`V8Kbw16oP1fDBC5)k)E6sSpQ}3xH0>3dS2enxT4P_Op{G>SS*m(9q3>Nb z49pt`mdwMmhM|M^%V(dqwywuE4SnZVW0ISxE&Xd~_>_xZ6bai?E_-Z_Q7(VzsbgnY_tY^lu)oROg({Z#zPm@1#q&^ylyBSS40pDvp}o_G~um- z$BpBYTQ~oA_RcqC_xA))y0~6pU9JcYW*h^CICLnc7C1$Oy~x@ix$pel-?$H`Pf>2q zaDheCl;=23J|QK?zA?>pB-?i(CwMC-il5KDC`rC3$rM-Q%W8@hFG@A7McTGD8@2S&9zWZLO*HN|aac#g!o!@?y%f@q;wL(O4=Dqv=@FT+5(AU#0 zAW1}6mEvEog4^7KHUJ9~Q=P3ksZ_6d=ke{33LHU3L@LP$1>P1)Sn$JuD^xpTNRk0> zEM&zHWdTlGk<}sFf;C%lW%*u&b~lC2RK=b4^cYq*YQ#{NBCnJ_^ z#IdY1RYb=ty5|jKyd;-f0{f2Od_!=*#kpHe78>kmmJUVJ<3et2gIm9S==1G^knjE$ z`gd}oty>l@JcpE*Maj!2=H)mvCA+^)@tw&GUVq9tcouhBns{E4B`PhDRTau>i&YI} zn$`-{%L+|3LJqQD@|7yNzRG^^@&F$JKn#!wTP{8sFpkfb-^{lSaRzM))Ipxa<#)VbTvq z?HKpIak=-c7qDVq&%EHQTj^n1>pmcjA*R+;n0Uc2PEi<@JyT61sEJ6(n;<2IL`jOW z`dcabp%nd-1aB+BA(d9={54xfqpT(ic%vRmBAe%9rYj@2n~KGwP3ncx+g0zX6Ea!M za+2G#Gm2L{9x7x8Iz6%WRs(YWJOdBNfX&kO>zOgNe^ry(JE*%!8|0{1%~pV z&2GRsnea{~G#damfltOc!93&@&hZBC0^Ri+g3le+*@9weP!1}T>y_)=j`vPAy|o0L zob;1d{7>wp9~|P*foZgwY`4MZ&OLb!FH%@7NnRsa!5bwp{F=Cv`qaysY;i-DxG_gk zTO_Zk(zHKUv=k^_6e!xVBrQp&rKy67LP^6bMeDe#ZN|_&rt6(F^z^7(8x#!{^7=|; zW1+Y*UtE)OUX{4t%sJ|Yr4}}hP1R2hDjimfJPxWokLtXS>jExY1BD$ym+gVaFZ}nb zk=#_9-?IM2Ee4aHhsu2RH)hgreh)KZFog%QQ$QD{JU}o0kX2Y3J$FK4>D~Pd4j}wQ zDRD>{+D`U0jS{0E?*1e~Jrn|2fk%K(mJpF())E3zgtZmJd;C{{OUMCtxF%$(B2_TZ zZ{RiDtq1q-!;~D;N#y`iVUnB(#!66OiE1oSi6vWc#Q`-z)5Crc0{zO~>BimTy&tq$ z*d{btP6U_BP?G2>Ypw)ou!EWo=(50SfkD*LoPk7yH53{k5v}rL4?WQtFf))n%w%^^ zGa2x1Kvw8*&QRLI7X!{wi*bbMbRCwh$Ff1jb`9uaoh&$zKDk-2URP*_8o@9)j)+1; zZ4t7b7}M~Rod)~P0&-~vCOr+8mO&}abnh+p87^|~$#UsV_v}jxTF8TbPTWal@_9vu zpejvNmo2V)CaW$}w&siLa%BxqCCxGW1qsLbDVJqW1(nsZ)&|+j7mC&w@{U$@XSt&7 znYb=rRP#($neYr z>8&mQ6pYv3`vyyhEq9F6 z285YhVIZ8O#-pTYh^gRv!4E$KXhq5=kQgRVYTmiBjJEYb(T0V6*M@ohnEov3fOawAStcqAn(#V`vyKJqNFrM{o%8YZ5sSGo>ndko~To6{ZZ(j4oOm`$lpuae!mll_M? z1Lkrgc1yT?2(e{Jm(}Tl`Yb_hwx~W&(VThN7`c%jwUe88Rsy(YUY6$y>&v7ss}*f! z^490F#zJ{>uDB*!Se|hX8<_KAH*2C!d%2>)7}*$CJ7j~e%y(LU=CoPndRXgm((HZO z>UYr{AQ}voi~zL$=j|cgmRW=jI~@BO z2e$j<3hRC6(5MbojYo?6qm*xAG$V=T$<*70%+I{cFPrh2v537!|2dG?=ec%eIMgT8 zo=3B);+>mQJYQ!8&KHEQJ&W6`NZhMPKdmWJwLXk${ZC|L!Q!DHK~E^Z)n(+V(?VgO|s=bE6(pc@)5rzYx z!hv?Wmh7k|IjN~G8nVk*8?~0LW{SHR^i4z;@W~niTLS`r0{CIJm1V>Nx&W#Z01N|I zX2_NySAxnFd@?cihCQeWSIhgqL@6D*6- z;-RqJCcmjXLTo4|_=)R_IIkYA-<#y1>8wE+3l8>Kf@Crlc3b=EpXi_bK9!$JZbSgYw@`a|8i;P*-P^m z{>T5;Ene>jzo|oKrT-Bb@y%~x4uA{}**al=4->*&4vGDl4%ffYDm+rbqU$_e42}*u z21!drYiMXK6{Vq|lq8e_hfv~C@FXYz^|26Rdx>~(=@+*X-d5q$mXopjvO~9&b1}z$ zBEn;pc)SdQ5o5lh3oRWYNlT;wJ7EM|!CuJ>3vf@Mogh$vhf=`cItdC^I^;?kn!TD1 zR_myxIjYDob_Ze!wu0;^Co`24Cp8F$Nv?V_>=-^pcjjGg7<$Br7;0lFj)-< z+pH@>9F17Wq*w-sta!I8jL)_At|UtTHbynd(M-hX-ooP=rxLFhQ?8d%?pBlEZDxJg z&iizb^M#-H^Kr)e-2~&D|KdxJ&N{FD3ZJ3kz?qWZ*)so^#jN!F?=g|TvGM!;|BCt3 zPl=eoY|obBps8mu+ac^y@H?$!C8GzXlu2V8XeUv`H|hQg$8!llEJvJrn?lS6Bk z$J;#LwQ~QJ@}ixZJ?-?z|CBFVHaY9fjx8nMGr8aX0cu(L*Bu7PfBCapSd4~le+79H z%2rIqD7@XYA)!WhXm(l=)lkuDGDKNmqwM4uqzwGC-D5G_@IgO@RjOwMyeO<<+@~go zyV_hWo+{H%1ov!Xuu2S0io!~e1SuR8fxL+bzc&zEsnD>4;T$cF4AE3aWN7ge37!H4 zD_FCP!cb5dO85@mm};*i0gni>CZ?RgQjncBBp9!A(Sm`3$%4PN=0~pZH#&kV%%#JW zl>*OJVwh3_d~s1>9AOoKHEBXSfi&D?T_V9Yfvkzurj9XB#Hl9}3^QEgBv(HkW1LR5 z%qL&3q+hS4-fpDbZf3vV$$Ph#`(Z!(b}#F0C*^7_`ED`i9|zf=_Ost_X57t39d-TF z4?yRE!-EI)Bp31nkWokDhgdIiQ1~>tXIVH%7Uh!`u3*= z%|A~(Zb{f{j6Q0KheN^I*#y&OoMqOA(Om0yR_lG(5Om%aaMJeVq9<557$zABm5zl= z-$aUs+$UbLy6Svq%DtcmzSkJAT^qAr-f`ABp?EW(ew%sL$?D3r^-1~epCFTB!iX*e z+Mj-k^z^-Z_#*&zZu{VjMOB7}8vWc&bfSTR)lxA!5=w)&QxQ;dELs5s1;SPch@x#T z5Rc9fKb|}LoJO^_1oxK~OU6e{n!yS-=c_OtGGQ?Is?jH?-z zmAt#%{F}|(8(!AcVuEt;2e*)W-+X`X8yJ>_GzAJsymjW-T5dp$BYe;B517smT`!H= zt>o-gMf1v|x5}Q(=LF4WNAFgpoHi%%TVjq|x#GSg^-R2h7iXEap}c7DIxP1&Xb3!O z_dRZXa^4jz7zh>&g-gaG6{CUtUKFR1QVLO_+;gtjf2TJ1xFux2A(&SgyHoxAygmE0 z(`TW^q2rltcjM+)<$v&WYo9|(W^=@9Xd@9nDfbTTpsCMrftMrjBr z6&{ESlpKQwlNF)R>KS(8T>FsOQLEiG$R$LBA8mI2#FLCjwHjAWJIcrNS8tVN&>LSu&V%8u}NV{ z$GV0BhGku}WO$GjyMpfp(V8`;f*eUqIo{iI2&i0Nxojnxm(M>*+{xt&AiV&;Q9lzfO_c-h*1>J`R(@ ziP$QL+%AhbtmN)i#qQOFZIlJh7DaB=a!;C*PnuJYnq!aKx#Gb%#bkn!mvXgeL#QnG z+%ERntqwSB^f_vI!fy{c?|*XsI`C{D!?^A4XYz#v;?FEhXi|7piwGdEl>yv3Wy6k83qLy3n^rktEWD!Y$9Z^tnzZ~t$L~4 zFz=efN7_knWD%Aq1?4aiJS|y?g^HG{CeRc(5{P4DIMOAaBEW;>1x`Rwq(BaXPsWoa z1RCrrkQ40{1SV*PbyR0P1s*hWAThS0YqeCo3w%P`&S+f}!j@atHaS{N7Uu}la~d>L zgR)mcJ`7bXf}+BD>O*#<9Q71OHWsIyPSj7u!!yq(m}le7bLm%$1vjfj*XvnVyxg1Z zg4=`q+rzAzT`Q=j^(4behJ}}Xwf*d7Kl6&0ZCcK-OnD8L!zwT9o~3)R%Hw|?@OrTL z!4Ap|Mr~%yemQ5qigQ@a-K&V%sR&yv2wr%`IjD;}X-+$Ci92ZG9KDPa4{?=KaXR={ zW^B;UbKTaSdu-HsZ`FD2)c9;Q_^!Y3;dT4$&p33he~%dX?ftyJpz7EyZ@ee!eP@e& zH!8yUP0^Q~k!LSMk6MZauav(WfBbK~^gqPK2g8(-+#lHS-&koW*cya)jeF^lBtRlW zkN(7WASvz11{xM93oQYm!6PB7QXvs4K+B3NLX5N(As(IE*E*7q z49F(u-|fY(tzgJfG){&lC^0}h(ZLU^u#hEDRd|{V3vd!IpczMigHIGOnj*$i#9*d4 zt6LV6Xx5Ip6Sc*RSY$8p)p4WEjs<5z!chP%TV+SoAbbo#tHMOhOpIibt65AmF2?J?O6FqCOEIR!IP-F6WPdhmmJrO6bVo$pI(Q+hGi~wknA_P)Mz$ok; zRQ7ajaKdTacuUc7@9Fhnvwp?x*%1;U1riaBmxCk`XEjp^j&O-5pJNFpRH~c_`(UVY zJXwgLh_GZ4AWEQ!2vm?E$_e(ct3YjKA(+r@1ug=rSPh^{vX(k(YheR1l_|x+AS_#q zW&Y2OH3iN(psob4?U@R!y%GTxbE3{`^Egs8$rVo}sR7ir4D)7+X(iRP6mMGMnpYF9 zHuG<`%Wk(T@Aiss56bV3%HADUygN?2-c8Ui$E&APjjQRV^%Ubql7*Lby_Id*$bkP> zI^f)vZ|fKHyYC@^g0T9%71VpMckl1N`-$p1Qy8~j9e+?Cbx;*`P!qmc7O`K)Id0&d zH7B37B_F(q-hB}RepuMg1!(1y3911ba$yB)pq^Ro#yfp82bnYwC`CRI}E>ynf z8rGNw9W46mgXzCM?4gv6xJ|VA&ei#E)Px?sh!VVty6A~I@8Iy;t4_OA@AiKFFT>q` zoBK7Jo@<%ZUWV+*93J zk$JP&%*!`zWLehJ&AgoJ?V{T~Konl}?NJ51cgJ<_PwMXYDc7*bXfjDTk!D&+H>{-U zSJKS9ysPb;tIc%tYN~EBe5=8$w}76V`7h`IoBNO$|J}yA8}r9M5!^ynij#Lsk`8O5 z_NqDifNOcQ_272{_q-+LteLx0%h{}pKkndO^u!8!<0NA#s(u^$o(V6d+4(}{A=Y?` z^e!T;r$FT`Qu&J1ej>Hcxt7(ZL;8xo|LfRej}fQ-5x?nH-}#z=?Z$}Hmr;V=NI_q? zU?Ae8r&Bz9`^)9O{lAvm|81xdPk2p~U}7`B`K`zOZ&{8d716L_;x!0Gb@n6+9;pRO z#iCSbqylB91jZkrMFYTAw=6?IIg66OJ!uM64JY&%Olj=+VA??&-@HAh-}bB9Mt~Eh zfl&hMB*u~;OA;`cIybi7jjeHIY1v@1u+GWqd!hL%vOWfQU=_(hNu(?A05IfDj%qS2 zQgf6OoWx+DXjm7*6yO{#aQ5d!M**HCz_MU;T8M#ZJ4Y$RT}sR~tIWi#KX4u$^npD^ zN8>S~$ppo0zG1!E#A~teIOM&s{Isde}yVcsq~kqy@fi~Ydym4;z#r>y=1~?vfq2A zAz0;q$iiv3JTnnK%#^wv=~Q#V5!7m)Lu#3 zk&E@!yv|b-ulZz?S$^CN%z(+Tg>@yOj? z^Yu>c^>+33Zq?0U+09Yi-Era7ZlZpZtC&tu&c-Qc5;QZZx|KZBMmE^`)pnj`JNtSg zMLQEC7~~wZhb`B+H5PnN3IDo75%DLqckoo|yQE8g5)hiz~omaYI zlP*T3W3=dgMDrffI~`vR1+sTkX9b;4olm>~`U@>Y8 zT8+jj5f}*qBSm4P7@PtHwGB?_TRP5}Z)_YJE~tQ(kqQG@E=`GrbeFDxz71F;oi1ZD z)y^y(+d)TX$|1O7$rm{M36^vQYhb`Llc11g0@%nlB1?rIRj4RgN(W^@1=oY{%8~gSJ`BmX1>_4(Q4ir zzS`V=zc2oBrukK@`xTZ_o=@Bz^xf{ZT<_N39yZ*aRNV5jExTL|9QPXG%Ex16W2vgS zEd5G>$?As-uD0^8HUZak<9xhqBwpATbJ!NTT#! zRUQh}Go4EGQKR^%mH%Qm`DCcj>%8{$*jVXzzb!(g5=8)5_u*?1^ z_(c;9#fV-f2m#%JIN<DpBDhG2u5z-M-Z4cG)G)(-+Qvw2CdYO$lDdLA`)D~m-s7-_^-YRo zG)pm2Y*?=VJ-)jurs0vvvgV-Fo*TgyPiWc;7<5|(pH>yBR;6iF13LMlK`wZwKD*NwDYXGY1HDrFhd-77+4iYZ`Rkw= z*k)Pp$7={aYzsc_2tDhG6ubs#xx(Ri(MX)=b*yBND;?x)_x;t5^OZfJ(xY?p2YKPa zcL;>W7OBLb^k|eGVW&aaYEd{H3a3S()JT*Xg;63=GBietBwQkKA_PuiixbWHEsugYU457zBt`Ilon(rh`ob zB)0nNB3lIvtCO6hWG4m5RYh?JHc^drhNU4&s*l-@y%IIpSG3t1(%tOQ+{UgRA%u5> zI*D1)>eSukGuzMM52cDHGei?<=i@K*n+>Lo$*WD_`$NMQ!Obrs%NK$4^V!O~{l44% zrn}>oyOVtLR=Qy${A?inycekdXvKJpc0OLem}*#iY63(z^UZ6yS8Lgpl?>xzs%|D( zJ(?sLi`&+4hAAoTJjH!`jHhD$a3T^ikdF(Tl^wrU_m}&}v2KMnlB* zi>STUsFUtk!C<^}GDh**hBdqqX4Zvj5n`f zbj)b|_PelqAfvG%{rO=~>Ofy=z8-_p*nu7qrL(n@+S(})NG%epLtqU^i~)twqcBJLt#FEQ42ku$I0J@oBv^(N zXLZgBsBNqU>Ih;s=(z%42&Jlq0s;wO8(4CplalPFCAk@(!%B2hlReZF-&?FRjH@yk z@##$$v*816zCBHDEiKffTKd!Sh~wUX)pn1m7jc*4Ny71`NPOGjCvdmk_in)Nzrtp*YNWnn3cqkIQv3dr|o=nq5 zo_QnJyq;s($hPn@&1>n##dO1bvSN&T)*ZH7O^fG#^9>34#5-cQJo2C+67HEEzlb<& ztlFy^TPe$5EDl?(3g4^?-)Vr^wU~?Ec*&bM*;K4@$c8>J8E7yBsuj_CRh&+pYE-va zGzTBF$M4kgpEbH)w4)YHidOqXq4yIS={drOk0*Yz8zlO@=JXH5%(eT^Hu!IXLv9M@ zcZ8qzM4WX;oOVZ?^#(2sIwXSZbmZaV!3RHfKOpu$qIR$onzLGY4)!{0d_^j4krD)2 zg+%KSXd?<|MB)u-ybgueA#fTbMvA~n>@Z>!R)oR}ZLycO_zOF{08JF)$x<8@u#{pc zQY_3-!K2EsREW4%EJ25c1ttMTm03{3SS^+42v|ZF-8u{j_DTXtjgx}Fmcb_!uYfMm zO^$a`Vm-AkFJ!cg!3WHm$4<{P<^~ei`Xgq#yt`i#<6p2l>e4i$LCfu)ysqNwUGC9q zpS`X!!^Yv~3&9t``X^z7VF#AWzI}Hr{B(ZvtK#Zc`O&A#m$ygHOgow8-H3xepXHjM z-KJ1}cgW>Hgk+c_f6LX*ry0Q;ZveXBgfq?SDW;7K%lcCbFHJp_B<+vht9L0+|MvHk zKjDcXa8LfImcws|J!_0Ts1IK%37#m3SS*X&s0mxI3tO+XPQjdXas{us;;|U%D;sj} zw2#*0rBFW6s6w=wa4n#y=`?6Y^r|JZ;_OzvXjWGmw9#5^xYo$57C%CaKDK>hiy8N< z9ZBX5#4h*x%r^KgRt9V~JlTeuB3-`21CBXwa86UU59e%=3ux3T8o6vAxywwPN7;8h zsqN>M2yqw_!d3$IibN|R4F(%U;f+X)5dtlWphFXNXo3oXl_78nBvy$gD^L`r9Z`lL z0+*!3LGj9v;q3uSIhLWsG37XWIi8^cSs_RatqN}|SqSbIq~2;+iD^~3IDpk^VbdY3 z2(bbQOAxJ~YDpeI4y#c#1vXfbye2PHpM-AnJcifEX+w^=l|h~LA^oi$Z7rm9xKP!Q zs~ij6X-`s2W+)~@PG1*UHg`S?#!UP3w}*nym&YH)S*LFsDHvz{KwOSE4T^O|RJRFV&uQr6iTdxi0y@=Rp z<{WlJANR(bx7d)nXWbPhSFzGvruLMnd=+XxrTU3P87@^u%M=+3MW#ZLs8UBO)Zr2x zHS_E-V)8L&<`H&^nK>G@Fckc1j2zoXjDA6X+CoczMTvZkwI6--!`nv>#vVPIv_(v! z(DNwNEInkIne+z9dS#zIoV2tOl&rRUq_#srawM~wEZ&47m{2%9ieSW&jVPi4A}*S! zK~dx=q7*}sqR0{?QG}vMFm$j^Sjz*+j@4MP;DoLIRskAdf`gU-mpGsq4x|!vPXS1f z@UuYb4KiRo{0#(ASOHFUR}x%dMX8MBZbkPoUFw!Aex*|^{37YnpB2iF;Nq0`+`Lc! zsB>Pqdt)slt@59d5tO2WCjC_Cd}HKXt=~*}uxNPfm-D^Pm;F}JyS?<*=q+ASF zC>Qx3PX+Ifmv0YyZ}uzA8!3kMz>QA##md0r?(mDAFhPItCA`-WqM-=cn`p(`ST)eg ziz%knbn|-F^>*g<4kS}Kru7Wda-wuNVzCnC=KZ_hQJML1k=w;FP~IHWhA$NdEm^Dwj*Ovrz30)PzLo zD^~@{l_7Fvuu>JO(R$A)F)php+yoLoWk;UDFy2yw#>if?2+EW#{wcQXy@(<%;wWoa!WO}Cmf+Wh@qEe1=#5-mPTl9b$0=cw2k1j2T7iV(6|ct- zzJ3z*XaZ!#S`1zVsM|dh*gh6Q0)@m&5JU;e>VXw_iVSOwsZzXy5)UTJP+;i_90Q>J zI+Ot@vUPYiej!q!z=Ko&Y{$*wAztCHfXBD$-op0IsMjPVr|EGQ2DQz!UW#qOO5 zZVh%DPs_DuamQN`TMLP^L(Gy29H-1Spqx}tlej++u=FaJKa?w9Op;G!3WpMQn%d24 z=N~Wfl#5TrW0|VyhMWCi%g&HxyZvgX+PIc#SbKcMJpx8Qm=T{joYZ>4dg|JUys1b^<6H~CR} zRh-T0kcH==8?})KEz!p>qfgqSPuk#kd(>W2*ltVYc5}pjd*n%rjaTPzs8H*ABy&7b zGEY>Fe6`cL#s#1itGwju0GTQfo?7k0Q_|uOunr3Zrwu%F8|S!zwqHZjR(Cedjf$J`(=ckvFpIOZzOKovRZSsw7^| zC3ZOegTEa;_{-(vpOlXuX&)nWb_m_0hx&&PtfdYuLg-t?ch5P&IS8Ss#ZaYSvRJYZ z9?sgg5q?dVWOy)QdtiVSur(Z9u62kCMs7gA0yYYH6Zm1MS%KmQXkDP;s)W1==^*hg zk&Ie&hX3EF{#AAUQF`)Gvit6G@#bRa>Y`42k}2Fv-dl1=E5yYXI5l;%o7zJ*`hzbf zYCat9{HwI-=Ag#B={#0cAR3;0fA;cfw@|y3s$I;}t<)RW8w~5E`jx!vbJES>)ED_G|LvW0ielKaJy4}yI+2LP<*qW zYvCnH2HcBF9wE7S_d>V2m!XSop)2J9*?aPdie@lhc7Bs~5o+=P)Y^I5Cz zxJ-8(y*x|Lt#IvXcj{^jSnA+Nr)Pe?+2Qf=u24Ude>d;eQT4!!r%)n?C^Wj5inI0v|Ji?&=hmt zl>n@v`fZ|iDnT^?3Yd7+RHAw^PB9iO?y|9U86id<_TQpD{QBMudRDxui#&+lQYr zLeD7yXB5t|+pCF0(Q@_sqppt^?H?{OPp7>4UWSZxCG4*}R}0!r@-DM#@S}G6-;LA% zW?1`&;oy^je{14>FdY6vH~+ILU3wI}IKf@-E0D~TSa=mz{HIfAF5FAHtCR@LEi4m; zJ}XUxqe~!%!a>KzK~8j3!m%sJo2=V=m?}I-nV<~^swL1xK!=>F!nrBE>t$^g?Z$tq zw?E2`KT4!uB(l#E@z0XWk7B9ykJ8hRlFd8e!u93rtMi_Z(zKOjdUmB_b%XDGOR;wD z_={lcj=%HaSogDN@ry7)G!k>rmMa}ilfbsm?iATjp=BCa3y=EVKm0lUpC4BebNW2S z+Je`+!uj37XMK^P;c&%7v}!6wyA-EejyJ3&n|KL^jbt+q?A7XoZ}&^z9hBUGy&e?Y zZYN8o+)H^h?=fP)bLO)quUDO31J8ZO^F!9FBahqTguMy!H_5u`6#Y_?b~!;apQxIO zmW*>my*6l%NpjpdKJ*aBIkJy9#E0!+LiY(Fhq$0aLii!k`;ZWPNR2wBgrCqu`OK&@ zR>Y}eB%c}1cZfc-&d-FL*+-niCnNZr7IH#;azgeypl3~oY|WP6@%ulB`#*}>?#?Pz zTM6sK{v)0K{jZ{S*9ugCt8DN}Iew$ry3-xM*GWF>HUBVZ{$Z5;s=vHd?_H_7&GK~d zMexFO#A0Xq#b}XcrS&}=lTifZ0$*{Ap&VnV7Z`h3-6OIVtpAfbL9PqS(}4bU2Du>s z3?nzzwOiJL$6e)7DbKu+b^Rip_#|1n6(4?*?tGB&-ii3{g=e2c7azo;4-(O5>Dfo| z&O69v#T)NL8}Gz3w-WZVCQ?p~dw*TY>D&F!=UaD&gI9Z~tq5Omn~Og~kip9?){ zk2-BFluiW?jZ(r!9#daGX3g5UEFe6G9U5MGjJG7kwidLx16M1j05qobTnGlXM=EEqsEIUQD>Cc6LS11nR7yl zI3`6MlfwCwFg_*pgc^3rh&-c5o!Ez+I7Xeb!Y-Tv+K^*=E2!s=Vdu<{a|i!Zn)fNy z`-Bv*?^H1pe>UH8cRu=2+^RfJo7wRzTJk6v3mxkTAMf|>?B?!nR%=B4M){CQId`qv zztvp4)1JTA@Nd=o*Q)Is<;JyQ=}IwXmR0E_+{^Qzg@xd`zNF(f1)`aH^IrS4#xoBZ z0|!XEUD&pTqh8`DLM%~)C5f#a9;^_DgBn*(B+KvwAS)ykHxb$W!anUNL2_PyEo|4G z_nF`d&BfV!(dj$k^3CP)^~Lth<>8&+_}%5no%ry*7&fSG-U@c_gon2R*?*{$UyuLf zoAS^p$!E0b_4|Wq^FgkBGEOk=JyjjYZ^;vmXB`g3Yz}c}=bRJgP>$1R*JX_N8p3fI z=dp_RUM8l!b!va*HuNH3wJrpze9=&}d^|=y9j{+a(yu04+p!x@En9h4dqr2<(2Xy; z*?nf&&c9lX+g)^fy5*A0caC3oN~rOyd+OI)5;#>BI$s{TP!Y6L6|vnIb<*`!hB%#| znoHC!CO{&lnva#gwm}AL($WOP*mGjy37&g`jz7f$v>ZMr>IfHkh>bkPM;#M6$Hb^p zc+{8+GDk>_IRgtOhMkil&Pbsr#LyE$zzNpt5F51ZG60>5<)+W4y&ujqm$s>)lMnHu zKYTy(BV*93w=Zb^wa43D?gg*zR^0bqHu6C}_gTUFS+V=8YV#M>+85=*XT|gv#pGwj z*k{GyCt2frY2LLkMtu=-u?shqB6nL8FW=-{U&h}Wy%v?!96s8A1L=E+4&Y-$&vB8L zqyz~iTS_aD(JK{;|FFc!Z@T4ozdN4!bhiCP%==Zg z^jW(6MY;j+XDM8yS^ZfKw{us2mF>gr+<#XZ|3Aaho&0Y;`G0#-%ARhm{<8PnvQ>G# z-Sz1*Uw%xlo+T#E5Mr0G5lhIR6+7Q`WbpDM*8x;WKR#+26S9g9*+K;I@EP;erUCYF zjn8gw3v`6LP(Tajt?mCtl2%2ioB5=HbKd%J-xbozOm7vEf zndvLfDi`xA=4%J|uO~#4)1uiK(aOApHz!%2l`PFkSLbERbMmEm`O=(XaaJ)kEgPPe z_Pmw67!%dMl~;71=2T7=b?%i9X-dY-6$@9T^H=$UhJtooL8tcFfZ_R&vE+@Zc+~i8 zME`71oAXMW)2hm-P^9EalaeIy93eO0G&zx9+J5?K{BrQ^`J0K;@#(4QxzX9#$=SJy zh1rRfxyiNJ>9yIp)wwy|{OrNvtYBqcv9=`LT#E}X^JZtJR+VkHEHA%) zv&8itiz1Ikv!*%hrEr&>DCe_q2c9ouFgbHRE@}S>>(GbE^Jh)?J9USIwnQc6ClqC5 zwio6NR_DEGN`2d&GS!_vJ@9O1sb+4ydbX!#wyS=&r+Vg9`S7dMl%6P;zBr$uq~Ot{ z(9u};8gB5@?B_W}^*PTQ^UGTDi(89J+G{HMyQ)TKYbMt#rnjF@Y?h917K|+yj11fS EACx+>(EtDd literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/test/images/rgb-3c-8b.ppm b/src/SDL2/external/tiff-4.0.3/test/images/rgb-3c-8b.ppm new file mode 100644 index 0000000000000000000000000000000000000000..6eca0354c56bb7bdd07146994fa4d80c3b5c00e5 GIT binary patch literal 71136 zcmXWChf~~Vwk-|H1pveN~^n`gJ2!QChv$UVH7`k*q(^m~0r0N&AB%llg~526Nv( zWXt{8kyrSMYqZccO5_Gktk5<3%q8~1g(Gz32t7FhmpCCiPQZ>AvE#wR88c46;G9$9 z&K={=zym$zm>j(u5x>=2eKFlHn0;yTROayq zYDJT8MKe>P**VF=ie#QEnOm36FUb~G<@3w(g(b!Ol45RAHZv`q8J4{35skl+zpFp# zuAHjM+3PIU3{{xN%dGD!tqbLb!F*kNfwr^2Fi>b5Dm9Ik8OKWWBZb<*LhYLzRcnr- zGDDi1B1uXTM#Z1_bNGqLC++1I6K~Gm4W3MnPR~q?&Cg8D%}vhFP0qcanqQfjTbl=G zesykvJGXeSup(GmQ><-DUj)Tvvb@S)ruNQt4$Ta#tnrqYca}!qj(c&&2$3_4=p|Ov zj&s?`+keR%n6vtycV@Sd%!f6cYB$9L%iaQO*ABTX0JNC!&Jki^M z=-C11WnJpYr>3(Hz1vHfQz4`==*h_UKMYcT?CbS>yAas>&YgSC5ntEI?)u~(Miigs z6+d%TzwWAj*;IaBQ+#@__&lTdG^O}7F8eqry=xR+=AEl!cF%+R*PpfSMvPu0UR>rG zuj7@Ap8Oorh98pW1LylA&qB}_5g17VUYbpmm5~)y6nOWwX2EXqB~2l`~#d>p|6fVGX>p&TFpswYTS* zyEFAQUv;^!yxLY=ZYZovGV{1Z_www5^ZtEc-+a*MQPQlaV9#8yxoj8ac^n`SyAJRp z2zf!m2#FXG4lTx`#W=JOjTT}sasnhH;3QZ`LdA+)iRW&F!!+8NBtdvtf2M6eH}#!g z&WY|$g|{acSIg&@%NJMMf*an&?UDHASbWD5UT+GnH-$I5f@_}oKV=hdlT&nUd#D2;!=zy;}Hj6T-Y9Ue?fN%={c@KGA80iCA_)u6d!BnXpxN%(55q zT^jC9JNwm;Yu&1U2S0d76gDA`o>9lF>f=}SNvp=>4O9A-<@ug9Z`)eDeO0o1RlIE} zT(#ye?#69BcjYHLug5#pB(R^?d6f0~zL*ZESO}?nAM$c3uyH%Q>o{^q#FC4_d%VD;bZ6NE1F{7U8_Q0caiIVgn=IsQRgI-kcJYG(NZc}LBptMkdlp6v2ZFT zq;|ro*mxBktENM02Bc%+RBkwVmAmXbQ~FDn)ED4R!t7RuHWt5N!i(_ecsL1o^_CG?tHJVXyXM= z>kH@g1?|TnttXMw(xS1Uppj7GTaw)z!|uJa!>|YJb%SH;m`B^Xf9GMqzW?_yBiO1EXvpVugl_Nikwi|@s^@jF+vHT#?K{%5a?06hXISmIm(oVz3 zf+(sWoO%&OJqxFtgwf7IsHgtK?q59B&kKjr^vT7bzID#5q=0KF<6A3F zr=MSNoTV-li6c%#g~TMZh>Vd?Fftk>r(oocSS5guj#JXHN(NR%hg1wm%f{)P32HW8 z!y>3i7^N#lR_~>?w5k7VLw3I{xj&M8mP$U!BtMJA_ZO0TsT91tKM~$+UR=IEv%Zzy z_bjiZRb^8es+lbdKJ(fV!RI6X&DIh4Jp8N^eqJ0ACA1yHj7f9HC28F!K|`{X8B5Wm zBCEIFJ^gRrR@wczF9+8)?%uT?)Xfj;I}I8ZMNBHfrd82P+L&cs+?pYtYf9cQByi2i zo0hb_tDODo!h_rLgPXF0tCH>Of@w)Ix7=;qi(KlDYbvC7zVR#_@XVj^sa_9mKZ@uT z#*NAoW^~C*`jlmD(t;*oT9r5`@BxN9nS_yqIV?m6h*d7SM0G==PqiY zn_B3p;l>_nIA%wF`OFtvX^@Kux3n|6=wqa=y0LUq-m`Pe8IfW#BbTNaF;7mr6PwkXP+Okh2M55<(P+m9J#z{(DRFzcq?q zbdt|<@yAoa{kia?KzM(2al3hHes`p6J<`3HTaK>GrL=dsv~{sNmi%X=Q5QeYp5E;q z-pwojLppbn*Sa4yBz``xeYIh19}!0mOH<}GWwZLCg`51B9j;NHk6*uaZeI*&+m7ry z4DLM*9F{~(C?gkiF)Ienx-ovsl(ue4T`{C=m{Yf{89P_ccdrX~t}6GhDi5wp_OA0s zHK|?op0zY|ku$oZh|w|XTRiPwz8u(e5ZZMXGbl-Tr%s&KCQhmnW>tyPs`x2&;8TZl$PQhU$4u2RUCn1|&e&?9vr6oymV2sX{wi63S{6mxUm{u>SDiYgT zO6_iS-rk88>2f8iB1x$yALDTNkH;5(f2{n;PW#kO2Ls1J|KzFq@e>&uE(|C0U-}&9 zxCtFG5)@2ILP>}SAps4JfQS*2Kf8<&IF|k0SL9k5iTk7(pkog|F1#yt6F-0Cb>VpxZOR!T0FN79c%0Mgqcfw z$wg_71+kd!CU$!htA8VS@;r$5p+@>|I|o-yo93G0ai?KX!Rg)9uJ!ejwrEkCx}wWl zH`cEk8dmh>>z8?xCsB=K?hOlp&0FD}N5Op;VWZN>Nk!CqUF@BU0#jg@24u`+{BOV#BjI*3D=dLB`04kocjbVw8@Mk_suP7zG8bqGHsJ z08pHs37`b33uzcw4S06OX`BfFQ^{|2Y#qhD-wGd^OROxTzlg$A_}kYM;0N{--z@nL@q-rSxzqBbAz^0IPQseG z{rvuHQJFU`emY-HbNZGwecPJ#pu<;%yVl~}%Yu1bdMiIRnnR}k?hhP4Z2su8 zmwS=bn^C3jgKIZJS`HqNZ9k4~JC1JLi)q@6Y}pNM-i~PB4{te+nCr%y6mCkfi(2NU zl6j~VK5C_}Qu0hG4O7UX6^aanB2%qOR4bx&lCaZE(iF^Y7G*b$ema&(A9^1-{wAm| zmhdVX*Yce5CY}5?f;dJ)zx(0o_~WNjPoGY~>=%%TIRs)km@=9~f5U(eXVX@elGMq8 z>ZcAegaZIhg@lC?LO5 zIwYlIWn{FRf_}gh@RSB=fezEZkQ7jrjn^_EJp*fC;0_yn>CDQtZUJt_s~7$uI9u^<9VZqRnH@!o1g5zjsBRQ*EPLRT?!M{^x>X;pqa?d}y6Y#E=_pf?4%vI}# zl+KNSsztZ%qkx|Cuzo>k|3%Q-i=ZJ<_^2%WodQ_m*hPKfswrjNoW6aTwR4%dX~|tT zrhNX#Bi{W0b2+}v-#O2dVwj=6~V`>j#N|wS(7XzxdLL2wO8}`EM_abV+kG8{` zc0(Jt!&-O4T23NodI=`2w^HG$(mc~>gEiVPjW$JN=v3)P6y_!M^{Lvts5Mk+wb4dx zn7Eog275YcZ#RLmAF1^i;3oGj$2QD)S1tN9Z2C8EKkM3jHZbfnn!}uCW9FaOzlYne zB9O~)mFf6~evffwZu?Hilp<+Lk@5BZ#EZO6CmAn*+@sOKbbP!KXK2^&{L&8Xv7^hwM5 zq$NY@swsWLoW?a}ZkTiCb=f1zq_z`Iet&=~{GYh*ew#MvRl|>II*NXE6kE9(Su_(+ z`aZCFEv#V`oY30!&{y2B=AG~kUR3W3Ms)mU1z9}d*F zN1C7I+Fx`U%a~T1qE|dK3Vnq+lu5fMgAPBv^~DYJN43w#G|c(cZ~8Uu2XyekFC5l= z8s2>p-g_E8_V(Q)Ld-Jso*?jIlb;~saAo;D}2xUE?_nxn!Vri3FTaC<;iJrZt2 z!i*S%0fOrwqz*!8Ffb_!EUH~}=aY!ivk^{n$F;XHL5LN~> znS@c0(7-q;s8}WFXdKZhM+`8-ps&#}a6pH(OrnlOd;pq-moorK@iG<`+!{b$Hcsve zu!giAXxS_0!3=T@{c$PVZeTv6e=V_VHvDzB*QjJ?jjcb3En5mJm<)Qc7+$jxQMdj8YwLbQ=W*0q0cTvyc_WS47-s0q zp>j=#${3?E#;J@+8gqu)@LZuSmK!>h#u2ruL@f)_Oa1httaWF2_v0V>S@6M*fcAx$ zSM%QWtKRLrXWhpEy(hs#7vUp<$YF5AvHgf9v$f7H?w{_~dVW1F8D_ zR1E?pad6NfkbtcU2YW3XrbELGXqW+1SQG*XGraeQ@azceTaKbXu6F}dOUURys2#!+WT;-7WrpCzXsmQQXv z4y-S?%vtk_eyxdLsi`{=dGJ_H!L|^OZJ*MbJ3W-U`QWV zBzK>3s+U7K@nrm0UwJ))SL}v297HtmB3>QEH1fjh_FleN882DPf4Lf3w;9&36ZV=P z2`tm7Bz{^JH>8Z+8+FoMMya)-YF!vODs7lb9iq~t$#nyA!=n0DpuaiQDvJ$5e{B_| z;;-L6xBuJQ3Um07W~4Zs9_;zL=^v46gMb|9Rz*xc2tzZ zcaV(@$;Ku(n!+8-zX=M{zyMY4^$3(6fz&v_wDu2`REt5V5#Yd;D1;0Fm!gmtSonie z!ob8Bdm++ZY!4G7VL}Kd#UaI5goKDzQgBKV&}6iXf|Zg%>k3K87!k;t9#k3&o>f4T z83aJshr=XjfHDJQ8AJt>Afe-=Y(QJ!qwrccA}G5GC$!Q9XZ9woupIgZBYQWCo4bSC zn%zgLS>0jS+GKKTCB3Vg-9P6&#E+U1r%sA8CeG3}^{+Ne4V%^}-knhJ*&zDmO7Pio z`boNfyRv`XcXZQqeABXJ&fhSk51fYeo`nsGqbC&63)+}Pef*jMc;M%o*4#C7{+cy+ z#ge^f%$U`sj;WIeB}q*?QH4ET0o2E=uYZ$JL@Pgxs^vw#TZBD;?x2L-WH()hQEnE6pBqd8oq3e;!yXHYl8S_D zQD`k1p@EQUEc}73D7Xj(6N5GfG$u%^9;u9K)fLG+BAGpvevH%zmdKnvrqQTu6B z&$Mc9o!UpE3RYh>Yd);#terYjiB1)xYoT(HKXy`{483NyF9g=F1vT!6wH}AOIRnBH zJ|v8IdlAupkvuNznpTeVU*z|mM1#Lj+T~h+douRNe~u@zhPR3ZWr^2pH;n@V)K(1w zA#<>k!{I6vQiFhLfOkTn)ku^QgM4UF9}Yr+K}jHl5QCa1_i0>+8Xj*vt}IZ2;z&d( z0X>Om1qIYo9FSibg`%djbPOk*BTG)FhzRI&0{R%joZ``1p?8 zl#PwoKflc!@+sv-RUJfB>;uk**B?dJA4WFtVp|V5b?cEY-UrsLhqVKgFp4r$|6QA^q zhmX8}E>8)+p)z%Fgc^>}Adm_Nm;wfu!w?z=2Mr1dEHSthz#}2xVkAP2#V83_H43wx zXj0Y>d_! zYw^Ng7f?kV&Xd`MzH&v&Psdy$p9;Z^&Q^~Z6IhcQjO z_^S1&lJ~(i+^E<5*nRy}|0U@zN$Y4k% z9I1jMWiYq|0h1sQS}aaYBC2tqMWqf-#I_xzZJYVq`tj{LUj+n{lfi%n0`nSBNdW0bEwm@JdI#f`XG%LClC#GYKjuf}DvLv#}y3 zM(BtX&;eC3XEclez|DY!3^aIC;)s%h_|X})sQGAycB5IYq*{ zA)jli=2}{|E<1NFoA$4pcdy&_u4?zLD|aqS_pMdD>)NB+%9Fds!>gA&=9Fng!kjv3 zNtd*!OIg#UagEP6%(+~1&Zg!0iY0SU5Z|~JQ8^owQ^yV<|A?`%f!o@^ZEU>pe=k@G ztvZOV<3-l(M%C>^)^3F~9Yz9J+mGXFcR1zCVGUbR?T4}5ryx#@pI0T0>XIvq2<-!m z<_>cAICEji>Fm%|C-Tu>Uhdth4FCPJ`G0OUHT_jX9=S<)-#`5pYhx4ZW!JX&?9E2x`@v|l zm%9<7=nz;f46TNv6)*&7a{#6aBtnHo${>^oj<|3Du%b11s*Ft5;7ChFAx)d{)6yaS z^)~moKuPC zpy3n@oWcCx>Qgf3wk{>vnl?_zaSsk z{1d?X$mT~I8&~XKOICu*c9Uy)Nr0_2`%x9Z`hsTXD7NK{(|no&kgeN{>Ntw;0a>CT zc3cwIuS!XK4$m5-<-MgBO|VO*U2A7tCpW!MkNgxzUh;m*Nr3(2lkZ=C^G#2nec!li z)s$!DickISv(A&Sp7W?T$6($UJ1+0vzLshJ*S+??jq~Ex7fp^?f%bua`UW&LUO)W4 zvBzWfwf9Oeg-5}gsdNK|qK0ENFh~PK1J26f4l;X~90><0q8J7f!QnzUOo0MwNz+nj zCka6<6LGyq#k|Xt6@Bwzp{o=Im*LTJ2&n*t74$WD%mo&6Mu3j7XgP_bb)?HlL?HnZ z5mBJLib>!BD*|qcf&ZCPe;-)!c#gwvSN?kI=ubMfV z)`ab={O#)(09g>%AKp|P-M#?e?p~&Wjt1lptH#uIkUSVuxR#`?%d8Dc_L3=MKpLOl z<`m;=@AdsRfT!Qv*!*N;V`uvSF6pOlie`PP_v7jh;$I#_)*M8>*bJ-N4{tb%YCh$( zohH9JNPe{&-F_6)FXRk~IaBhu0aZe7DYA6UwQj?`Zp*7?$FpI}`_;NnH`jZ1-+R5& zaRl~#-lMPU5Pu(SVbxE170>xpZum4kRMqI$rx7iOfU_k>zbN(pb1(i+>F_~GZW%G2 z^@HbczarS!K(;oo<6Hzu?jjhR|JSEVyrY3Y)1%2+1Wp6Psve{mQUTR908l5Q{-K8jP?B^`BrThuV-t)X zM6(CM;0#PMBy-2gSSYn4O34C%f}9znWne%~rJ*BKED&ir7`$P^)xcRz;*=z2QNvj@ zCQj+%=Zy(V=GaA3%(6Ld$&$K$RR{*++gEve*G2r>BK}S3?q$}RIetl(xME1#v}S;L z4aoL4EEy~2%ms652R|~x^D*r=HV!rqP=fRL3$oxQ{OM74w`(OY`Xw*A>L8|SKk5ZH ztYRgwdOHjxPAw-%9VZ#>`_+DMj3xF5#U%p`r>~vh7j5>)punZ#ndC=RfN| z3w(R_Y~VCt;4HW!7oYj)(c469&tyQwJJ+gp-$oE99Y?)B4sYUxG#d{+YSBsDP=?_0`|KkS{-cje|u0xY_09F)10|&5T6bP&e zgc2|WfK>|A*a0ab!wBBUbY zlmwg-k5-ewU=AzAV`O;f0*?`ZDFB%40Es37tBh4VfD7P$z!c~(7{%(Cc)b(p3$jE2 zsMeXNaUy74LE;1%UGYX20+{v4Ss1A!S_#<7f>cb5#u25VBh@s7j)~MUQ7R%#?}3)? z1W&7@#${16+PGjK_&{_YhZX7aiT zz?#Ih09dm@q|dcxE}OEaEg2QVp6K6xLDTjDP;h`*0)-WzjCy2~Sxc?hk9i5Y8(vi9 z9;b3AreHC&@O@C-K~(c`T+2~f(?Q(pLogzYn^tl*baAt$#D-VI3Z7@ffp`09KRSxv{%W}<|QmOx10fmH;I zngHo(cq5shC1SNC@Ichlff>dMi8v7vC;I|1D6gQ%DkuaQ2@hy10nV9$cJypQ6FH@dnK8uAn-UhxiF3xpSySB7W%Alh&c;>#sx@irI&=TF5KK<@u5-38 zQvtGzhQu{X`p#9}&UMk|b-}VFW6YeEl!XJr`<<;Vz!AtVxS!hC*xT439@%0Z*+iwF z3bw*uY)4e_VqWfYYW8AZY=joi1=MauG#_)CkCU4ZQ`?VX2Y~`B;<(0yMQciJGqv{A zw}I!?b{5!n?B8?#Y)}|9A_*OrhKx!O+Xwvd_aJs7+uDNPD&nV~ZhSn%KR!9Lb2xo$uOu;yAz>yrUjvS! zMH6)o$l_HF09LF5iIzH`g!Zsgdmz8a)2FbrA7LlnPA#pG<^ABJRkCRsn^lz^WwPa< z@*3Z`3G2&7cD6>ri57&XX!Fw^(uu6=y{p4d7W`^ zSFm@J55V2M$=b4}t{Rh8EE&5ud7D@H+^gJ0Yu2DLA=veY@4vGB;j4%LJp`yO2=3}4sQ~%C$|LzOFAql`VbXXcTB8zC^`en5`=Dl;TSo5h^ z@vGS>p3&~f|LcC!vfR8LRo24f(7*Tl_P3OWVrmO?!}V`}(ZqyWX%rb8Beq8YU09g|oX>vjv7-$m}C4K zb?WAI+Rk0}-fiCghuppE?46seHEYV^P4dCNa`r!FZ{B4u++=heMtc45N2HAnI5<#D zzhtd$HnzTh{(Thw`?L_KsK%veGO&0ltZXf$dMmPW9hBGD=QDw+{XV4&fh|Xgje7|# zhtd7w_&IITrYT|05?4@*d9mYCx#ik&?9p-xkoE2p`VL70CKQ2Vvaq+((53_b)DCLi zlymvA-|N#({%5o9fA04$7wblY(zB4^@ISeI{a}#5M+}N!R7jix z4(TWigR_Uuk*UQ~HAs>cN!B1pN(51Xz$;-GB?6KlAh82NXa~QrM_oLI?Zo+3wuR-i zdB5JxSkiUOpXZ34v6N^?20>yJ3N%4-2(7?kw0NA6j5AWOCNj=M!&#^V6BTa+%PkM} z6sw^U)MUH{#1wS0nnqSrDOx63#Uv|f1Qmmz08u{^Y{GyYCn6ZK1MM}s5=;P4XPge` zurn}GUvkcNfUGEfGqWo1PWQ@w&ypeUve|$a zb3rAq{qoZp5vcEdZGIE;huJbFC@v7)*Xa3j5mB_pA&TamN!+F9evorY&hEJ;ov$RHd5RE9=MF`&p|R0K#%#OaA& zV09#zX#}$)K~Kf&CL zahgHaf;wzi5jmlb8P`Nl=wqfWam&}qt2b#|AJTchX6=5;TC^m9oF7cO^QL`6VzJMH zP;swZI6a=pqrO=)ftCE!c12P9advZGSb36TL;#Xg%gP-0Pk$efwH;Z)k1Ib)s60)q zJWnmZNU6HWd~uOcdX!wm%_x`;Y1rbt-j8eNMGOg}XO!{VhJ-~6C%+0RTxY-7WY_Xs znvdOEPrSO%eFsJUBa)y#;j{KLzb1Zg?mOqQRrf*33$E#1KQBN3H7hOfY0&q-1I3hJ z`(V`orvJCl&pJatXGNL)J@sUY28mTVV3aVl9FCCymurtwz_AJkoEnCg!vR%sG6Yr% zM_<^XFYJ*5JEY({yUjS?`sswmrJ%RxdCP|01x219%1K3_$%!O696W;1Vw73%ivKBXj(G90}1%?>{1s903mW2V@Yj8s8fetf~Mkln{8FL-N zyzwSqvH+|Y>oe%a3$1Q+oKS`Iiz7yrkt3RzDRbicYp~Rvx%oMBToVu07|Q1T@&;Tp zx?Ga$9ivOh@h=%E%}!ZwJqi{A3fICa_u?w|5^GMphAYmR$S zPb%K>DOqK`@1_jx+y8zF+w`D>d(F`4qiwQ!r$k9f=9AK`+6>k7V)(NEjp!kASC`iu+`!f$z zH87AyP*NQcW){log1K?QTsvW|JfX`#tbqVmbW(?vfjy$|K}F=aA#UL=b<)78T7Q;3 z=#n$wp5Dw#t79hBF;ko9$#2-n-L9F#e!27hWxL^Je9nvW=vAgf-K-K@xK zyvWSoh{)ZEEIUnnagkDSky$UyeJy>_rl@X}zi5<|Hp`1@#JLs1?7Xv#yxpXl&Dh?P z$UzYpCBzJAIn_fcA^PS4RQW`+lh$IOA)Z7}vk# z<)aES5lQraxc}}qv@c~HU<#`I(?>Q>Y;4Ml7{~L`dayg>>!znUDiJtfnLsNlu}6sQ z5W=4j09N4>(41mrFi7%XmT(d{P6Wq_0qFKh_(>5g(d=u&YiETsNonG^(&`GAAblOG6crC_hvv^#gVTMu6o%Slc^g2|2&P?Z7< z71)a)s~yQ|Iz__(MHUbi1QB02%YImi(bI8ycf1K;%EFr6305~?kFk2!2exXRFu+O~ zzylNbVbIzj0ds-yUb;XQHpaq6g9>YL#acblYAVt|g^5O(ZKB{FS@^IireWt^Q-HM03vwGapyPebeJo4TLmhMDW9miFkCBGD8)QQsS#M#xd!dB&r zI&pr3EVo(mykI{j|0n^#S|xbiDyx1iYiL!x>X5(cRJXP%D(b|AHKP1lSz);#r-Ywg zzZ2JW7&UMn)hmvzZe$j1Kg(ZbR`NV*4t?s6e3}7Cj{_SIeZk8Y!>ky)ZviW*Ha5;* z*?Rug_Ca|6FG;`HZ=k?ncvO>$$ zV*M2F_(NI%GP{OcI_R3$YfHgL%qDRQCU?b2F%TW zd6v_>pV)mE)g_E9tRg(;dggDi%lF)>4?Sy-eCm$dAV@y|L%{>+t*Ev(3>%y37}T*Udre)%&+}4%j28^l;5Y@0AhU-Q_K@5T1+@2} zi-7}8MoS+9tO1lrkv)JLEwe`f5tcoHpZhSHxa7_v+?5B#%En(i<8N5lD<|x=8}`Z#1MHLD5usxs^<>0#Fs3!g z-uuaKgCGAkXeW)jlT-la+_h&m-pK;gXviQ{K8|&iXuG4=Ox}DnE%UJ4-AV zWxbRY)XIw*R3)vN7q3;7?V8GVbxDV^piPq5AkS}Cx4bnj&s?9a+=`a21)~;TuVKAI zJ=iR(dnK>0msHjXOPXb6O=r(L50lzYBFf5fMcbY)H=V0?o$C*tH65qc9y}{sbIqS+ zK5s!MA%7QSYwQ2W#@W^ebfy#=TX2J_>H>OXTN_^+n>5s4*A5~M6or%Gysd0!DcoKH zi0Ocq!vL~4IUFm8p#X@oC!ok;0H88EwA>Ed;N=6LfT|)G_$hp`F1&OwtZF`_=QMfC zGP_~v-;!5=@Ayca9p!G$au!WRB&)D^6#-`;kqsoA22@oN&P>5x(r{Na{2iNe@4>qF za{3tN@u98cwzf`5B#MY&B^9S25fo&g#$=TvNkJvZX`rMMwM;->url$m(gs!*wctBD zAt0)P%q*;l1zDVN!0TRllC8i;foBHV!o*%P30Llp*Uy-@ey&$ev^zJ#wKLZ00$H8W zW=E`r3g&}IEgfMXBSbWq^A|2~{_*?gq{oG>h~fZDX$mPn3X_w9O>3lOkGSN#_sQ7` z%I8OxopZ|0lPkrUHM0Cy3V>;Oo3^-3UD2hh>D0YwRTsZj6m@8-y7dEZjjQ9A2dlT| zdmp9T58}m}vq95hyK3OI_FbD|xJlaFuBdJjmvjJRk2&Rq=z>+Zmz(Y-YxHixtDPJ0 zCn~;=6jy`@fqw62V-sa#6K-o0_{hfJ#wHjfNVbpSY-|&4AI00+B!2y<^R>&8ymE|ntu$zA~Fr}ki$3T!Y=;s61?eb88YjN~a=^aLaiX!%nVAgS~zU@Mr!p=AF= z9Qv`^r{n5ZVml8b$Hf&p*7t`uOIy0;!x(1?i=yy!Qn)*+C=?ZetiluYc#;ViAsPW7 zYo_8a8N^E#@rF*iaU|=gL@R^vA=2}%wanrlCPBbKEDX%mLn1*YX+ft0{uP}F*lJ*r zjUX8Y1067=qd{QpU*iK76d@A>vbYeg+{hMhHv^ktWD?B4Bm-i)P^__T*Kt1ALEcx% zQP`Q>c~XYYrVoN&r7l3$8a>LuB&ijod>X}hN2ji$0kSJP*#?J-n! zYRccJ%6s*b1BT@R3p-Tl9q z0_~MJpu|s+LJ%=MMI3N^I>(X<-UKvp6I%8o-|JrSuhxz)H?}_X9yWyvsU*1vOTnZ9 zwkpYFH36?9V2xC)79@uhoRNyN(ur3L;x&zM!zN$T304~Zl1{ktW!%=6tJxkx0{9}p zgA^;MBqfCi?9)Tv3j8nwAPbsVyopHw3JeyUOf;;4g)_0S*Dm26`+Z({r`FB7lw<1U+DS_Yagr@QXcBJNxWmrM-kUazZiZ^HvE43wUV(mA5cAV6lo zpMCum(6s13{-%QXk_Oo*qd~&%VWe4HqXK@wh3AN(n7J1HV zWzlP8X}hYbTT?fnZyqvty)`wz(N%Y-ipI_3!{&`X!%VM!yj9-Xq3P+;4fp7$=WkAT z@3kkNuZ}-nO_;aZ6?N^R;=YULll`7tUHqyrbWI$^*Vph=dE4TsJuzob8ow)y+}aCW zS_+sNaPCTh^1k~MU@phTHt*5zp4*U3E@FHhb z)rVKB7q|R_kM9om^3U8z5+_Fql_DpRNl_@2o=Q$_VI>W? zq|N%}tOpeBhn5{hy*x{36sNT-a$n0!+7wm2`kq1E_>f_C$T&8j@95Ijg9(i}tsD|o9wRMu}YGGM}q69z7^X?mdm0R+JuGFA46?j_>D>b!`_xED?z$b|lJiI0f#(GATeV zK_Y9x@Q#c%&(8p@;$=W_@yBNM=a1PJ*RVB`wi zuQOTeOfj&CMvyXrN!-JCcCg?(9YB6BU5I8j`X=7VtXwyK&>Ju12D99_I%^qhHePV` zI)OneH0mVgh0)up%sVd%fYtJhZdn?*@2I&?ioJBF>ggE0BmBx8C8xtYZEd|C*@pf8 z>%_nQImiAVr9SrgRg8>ox6~oGv^n4Wt>A+FkTQN)?Ri3zB)dtH+a@dRR5cA5re>{& z%U9>4#)TeDXScSwT~;uvZQr_APZ;^FvccMmin8OJqQmrhVg0yiOYpBN!+-u_{Li0{ zKC0fTyGKBKg23=U`7K9D_%&y-(Auy_Mixcy1oB>j)&-=64_&I6g}-&9 zT)N||zIfB&gz*=H@mgiP(Hc}|#{GGdQDFFJG=8?4K3|zMqMOR>YggPA8)Z!mu&$5X zHkaR3cI5*DXIly`X&L%P(GAq3zW zGKGdLfj;wGpDr+Dp6ODL6p7rUz=>J+x3Af~@%TJcx0Qn2chN{4AFU zro;0Azubmr!2!ssm0<97gT}q6F-ggWw*TZ4p0vxVd?|%+hDS-sV67A* zrC}8`0zei-Oa>>4!If%Y6ZD{k0XZQXGCSk%ys0-X*qc~)Gk@H8BQ||D8t?U{4;r)L zz-%}&f7F_PF`GYGESIwTw&H6S)Qtz`sygm=s`*28`dvQfK9GG47A@!q6BBvwi&??_ z0CF4OZ*1ef{kG8IpXJP_)#MR~%=wh$@D(gXb9lqtg!R5oD&nNv~u5n6U2jz`E%k1#Vneyv7 z&zx2EENZ%Yd6lh)$;;~gccP;4_py8iMf}r4&JV^nIs$+dZzMrFB4j4wEM)v8m2l%o z`s~TP&kX-iRrn#m%fciWNyz_?q_=#Eduz8vAuCxiT;fEaX~Esyp=rh4H8=#<;7;T2 zE)8@y?T$;+fALHu-MiJzzQ_~;CdBV!9=$D0F*0d!<%@dY=v;TPddF9i|=G& z5nHyiEalCdirJFOUCG7X8E@h4EBe9~dX2Zd3AVcna=6CY-1^yEIvUG>HNaf^)cT9e zNk?e<(eaVI(-ZlC=TFl=X?(N(P>O*RRv3R9vCEqG$Y1lz+3?RMqYIf)W$fr$L0W^b zwD)*s`#fx>j#SOc8U3*!5M^!o0*w+2F-jju#&AcpfQZXyJasTUg zethzGA5@?rHp@Dy!!vyzQ%(;X9r8c8&ErYZ`LYb2B!eqXcCbrS zuhA*T-UidIFx^(0FBM-t#;d%jX|o;M&hDngv~Qy7mR&36UGoR+i^u&4{BJXa_+`!4 zV1X|94C8**<-GpPKo~5Imko2<%j<$l8hu*kqsk`&%jPjfoA|t0Wb%M}B|W%~8k^SR zoipJ%v|B!XFxJB^BQUEfHj?MX>#O_SZJX%caqJe#hw}*{1lCtQ*ohJ1*cf&Qu2++X z=~ZT;cVT6CXKQ+kcDc%lzX}bwv@w<#=t!K*Mc$qaozHxLDKM}b!S_s{!1ww<1zQ`6 z0Jt{5b@i}D2g^7>N1Qtv-lFWUGJ|C+-D2U2!`XF&$4OPY=UjsB&v5ad6=2K;$cBlRNwv#X4Nmu&)Ula1*5#au9d>p z#puFDmy|r4`dMTX3IBc4zpB^0aM&H#f;!m|X>D$a1dl#pV=t?@jghl>GBCMQH^i^# z=Qi|^^Tv0gsYf|1Uvrk$2Ov8H3-n_{*oh$&%s66mIB0;cZ47^S+uR0tpBJTqv-ir| zQEF;%XbhFQII;}j9DQA&1_#oYJs?3ehXZ;4v8@3ZO97@L04rF}f%T2G-noe(sfT)1#k7Ip1~xbii*@izlx#i^OjnKcv; z#h1=t+Jei>bis@xanb$d4Xt~v3h34lg(o>WuS=}8N?ksd<{K9cIOI%w=d7S|*D*O; z_-bBkB`>a)pV6}2GA^Ysf5>+3?}R^ZnLjQjC6v1D^6KrZYHo7ZeqQr#WeF`lWj3tu zcx?FxC9x;KJJB4KZ5Pt)nJ@(~4b32j6Y+E&h z?cRtR-OgDf_|Ge=vp#$lXnr6T1x^SC1~$Go&qY-9xK;Kzm-e|;jkveWc@vg=I|e;! zYaMI*+(&5Gx>;oD407{qYV%}hivNvz-p9Y0Uq5M>-7T0q=$mJilTPC}WbBr~XAV?* zS08NBVPJq2J*;mKQZvMrrNIxBzKtWjQ9a}!|5+H&AxUPUl671kkZS`bMhPUCacf~R1ll3y%xJ*Qq9g{96tL{>L zubNUWxnozG?YC`dw}Ez7F7P|F*|n>w*c`AB+A?!pnWgTTCF~6B3ruw-<~m|G_&wHe zRPUXcoLunBXIY;$i_PEXdweb}Fex5z&71biUP0%O0*mQk73`==UV0TPtx4FqaKYpL zJm33uxBKgE`}dDYDe1eQs8X0!y`5dlOK#n*NS%$1?#JVs+{4N|kck%PJR4lCbI1TD zeIqQJ9FegVQOHdw<;9PT1Rvh!3ngj7vvfZADf!Bmq;N&Ctdj`ZZon$pbD+ko8L3^Q z^Csr$3&($`U|$1;VP@zsC!0Wt@7Ro}nZp$Ix_uwVbgo1VQ&T3Gv1>aRq8DWSnL5qO zc$`u)N@?v_NvjxgFYa=#9`dM}@Mu}`By9K%Q2fUj=rO8a_ku^~ykEl%s(BQ-%CDtK zs!pTE~{u(#0ioS;ZQ!V3rcixD2P~*-*8#c8s70MxYJW2a1SOGlbM!|Jugr zHpo*t(Gc8Ghf)PnG-t4Y zdzf)9T#SE&yZ^`!zv?Z%Ty48#4BU*A-zNLr1liw}h5o3HzRyAZ2)DjQ8ecg+eGsoKe{+{v!m z&MIalBu_+y*83u}to>8X{8Oy_GHg&4uF?J2Ok!v*B{Y{BS;kGO5~huTYQ4$jixUO1 z6oCYMsa$a~`#6fRi`!s&Pxe@~qanpGP4wSSKvQS(=)uw$?x`^Xo&Ti0R;)BmzEw1^Uf4K=tL}3t?{}>lajTp3>|XO8 z-SQtH`%Y1PMo2!B4D=EoGe!>_-ilo0hflHnXF2}!9G@Aw_afVuC`1!?aqHVy%5LbU zD3Y}vN(UNIeIQtR7;wafn1Wy~ zmZ>h=1j;so^UdH7LN(xyv<5$c77?~@3kPCvktOWH(fAH)f0Kf`DTxIq?QL=Bk3{dA zK>J&q-966!7HN5dG`;mTy7th!aMHaF_mJ8doS1w8qNZzW{cA6KXF!AQ`)cp^-Tt3@#t-SFY`u1;s%qz3F)y=7keo@2^euI8OEPu)YUUAT?3-Yg*oCcM zukD}|r!8Yr$)G)stY9Zr2r?!{0}p-_a3x7xSu+2hk0S;XYY36)IX-I9f&HBOO3C-} zBQSqG?B*WH0~Rqq>ht7YQXeC`os`;4jICb`YhI2ekdk}JalIt`AlYYuha~fSiBYhT zLG;jiQS(e(Ri97IxNr3ovU0+!Wyx!h9`T;7dZ z-VPz|hHe~0k@u5{!WhbaEcN&+<0PHBkK5XhU>z1Pyv%vJAb9}x4~3{FF$c7;$&J1F zO%htdUy_0Wi&# z*uJ^$i6s=kdhKO?8DxJO<9QS8cm;68+1y}lZ!uQ4z82RWCO2*d*DmmDd)-S9!*d@i zk-?W!Qyqzk&aDmNJSRqUB9v0Lr0xzfQ>}|Q*ZT;^E&UI+^6~*Mo@RZ1S8S(KhD8)5 z=x4XsX8Oiw7`WYr66Mer(-JdqwjVypk$GUbV2K zRFIRg5rM9Da*sAZ;$iXmj%{l|UOsyGUk6R=`O%Y}nWWHcYD_URshF2BKJK&gBY`Cj z=14<$ve50bP@Xu1%tem%S+<}*ML&BARyGEYE+^;xK=sR2SD23PeeI#_g|@9H5!MsCi9vnqJ|kq$MUD^Yz;9#CW1!E6u$s{{8__V1t)KF1nn$%QqI*`n z2RD!d>;3@K1(yFJ%YTiJTHnD?4)e%IHN@ShjlIx~-C)w;*DX;m+ThYo>iyz1&5|_o4QW( z>aPZ|rmt)io`4qJ`C*kKA0Q_mr0}@8&wiAXKp>_y&Bs;`V;bkeyU7`Sq`2-4%;2Wi zD9szdO5XFITk-B5_UTxOYh8+Knh&aTD{_0HsFwvfQZ)7jQs0q zgxur!_X>nb_hCwO*GhW(a%%N}U*mMh042S5J+c@07s#HIbRTdnuJ8GejJmXSI<`!O z6P8k%79;8w@C}RT))jmoC2*96S>d3_LKI1WCbIoWJK(&{**GX$-_Kj$4qX=plJ^pr zvYCTFGSPqBY~Kpl(qXo^m?Mg2i(>gFnM@zO9Vpm{8J^h~$t(@H;erj$;lqFZV&0z*o^Cbl^ybl$E4FLD zlS-504cq1;md=`ZKY616IbfXkWz>877utpP_@^$0=Teit(NoHqU&{nVQQ7e9G3&HG z)8sz0q+YXxZqwXB^U_h9ss;P96}Lj7Ybn{Qfb5moVi&FV+EY$G8LC8>bsHu}4yHb+> zs>Ie1xa3#{Pzqd|Yyf4Mz}XfEwz(eL7|yZO!~b(a6BA-f z9I@3N;RE={xsb&5$P9994n3ukmt8I>jx2=d&fBJqSjY65CJvaz^_ZuRSZ7Q*V zv!CoUPWPQ+BRdJUwRKh%WA22lubq^v#+AUjrGVD800J2|MnkUfQJdRwt1Q3GoixU2 zH(k`dB^uf|tXtVhTHc8u9^_F^2icd)ob%x=Q3>-j8w^~`0}Sglgv-J&0Z*|ZkQf<> zEc8WYdLUB^T(Z}8<~NDh^Wkdg4pDZqe|9gGUWv||t1g^OB-Td2eM3P&$ObT~34&?z zP_0Z5F<}lo=`c{dLMwe>bOq)|ksU(h0CX=183=xHHavGghyhIjq)kARW(z%YhMzlu z{5{B?$rp*at_WDJOuw8Mem?WE5-;{k??h*}N9Q1rsVMBqUiZq|=+4P7M?)DHE^yDE zCcRe6(R*KPty_dK$S$+XYhfm{}*RrgIe#_qZ&qKlORBX02Cd)Rm%`a{ko3;>|N({{=#e4&$ z%E_(b7sqEpzD`(vTR?rAi;nBCjcYeb@3+XAu*;lr$R)ZJkUX-MJhH}Jqhb*b&mIE_ zlgZmBZF9cU#NggZ@3zt4`q7Z4nUJ=5zvd~|_IbCiW%tfykN$O^0g?})$El&#>U*DU zD>0~_ncuk)-LV=-0KZcLrU0y5>^eV$D8NvT%V?sGt&?{034wS}KQD+`5a8DKlgXzw zl#@K_N%Gc78v8VwbsWF|u$~0)c5p;r0}v=72ABeoFo4z4Kx&S-aR38_+jVE&IdA&> zjD3E+cYb$rHQ#sRWhnz1eiOuo9%RV?PBuYMjbJn*IKvb{Get1WU;tvCrJnG?#0mv6 ziBm_o*!~|_T>!F(b9-w$Cl0%-UhfR6*R4=^=@oP%8+&@X{fHG-Ta2cPbeq&J7> z7o00%=MCEC+y;7K3+OMH|I@!s|AF=EJ56v17g%Z+xWlqCEHi4|l3U!8dVEudktyT& zytTMeYW{b2RRy!W|74MLcSyQFA^#N3T(Eo2)|wa6YTKPB_Oj_Wi-Mnr2Y+Zeg-)KK zhLP1S5uJXC6WG+bz~sfCtgYBWc19^Xt5i@GouHl6YgorfnZI1CB^AYX+9tG_rS)5X z9k)%Ncg|aM$)58}>afRHy#f;}aB>;FcvRi!ut-lDn)Gk%N4Cs|cCH1q%(&HzIXBI@ zH_dv~PrJ3wd9*HicaM2Cw%C6s*nOXIBhZq&w-P(nLpzBPa=_xPf?Bxgd;Q5Mb8!f{6Q}b26h&VxHD2;ZFHcr3kJoP}TJF$xmw+3zGGG|P7ogA? z7<9`N&ayx-%@A}GP`pr@F^pvn6<9)dtYEv=&|_zq*byPI*ONKxpE>KDxfq-~8^|1h z)A?Zt0%j{97(TOxNr4pH?2E(#e(CKj?QM`8GtN&b*R$V$r1)Jq0(wOE#u841YJpM( zGBE73zti4pe1m_;Gl%55K+_W~;*0F#Yuuw-JmY(PlEyJfa{)Qz^fFrBH)>AX-th7j zZ{=oZ=8`jXLndr@G_<%3lB3tpy689Lga1D6pUiZ2dl&H4CbZf$jNltJgp8lTCoTm6 z2U)v$-^bi*M%}9WoN5MKz7IOL4Y;=w zJQ}+k8>U=4$syfaah)3x?Q4Mpl#p>Mc9HGBCO|Inv6THN%26umFpG3lMm)$}5=PAP zQ5(BB(msv~D)c0jAqruNz%Mw42+uh{vCjip4Q>oDw}O~iQ-lb3G|WL=JcycZ{Os?O z(02vFw^cE>4GFhhIX{cz@BIO+Mp9ct5c#qM(;bGx`*fijrf`}mjA{%cnLHx|Xm^ct3kjG^W8fM*naHT$&s-Q9}D6m$EEurUlpY!HQ zF^4GIr(6$|-b6TGco=~{6`4Q)tW~eofY;3SksR{zqty561&H@W#yXkSkTk5p*I2XE zLWh(p=d>=bqVjt4!88w1RTnNtCh|SqbDrIJ73Mv&h2!{?{X|?wXE)RX&XVdbUW0IIX4s0?d!qqYXNP`n67mUm~qCb z$VE`F0`$5Nx3(R)v>Uv#pS*UExw03#ycpYOz@3pF<1D4|;aOuDd0mS+LsFDn>9n9}g4nM;@?y!z`;jZ^-n4gKLdyM_9v)P56 z5ip+9%=Few4SKX8z1q4&IBWw7Th)Oq!i+YpEvZHz8w9dz3)`{zC+HGnA=Ra@2HV*i4qb2d}Hi3EBMye_{u>~Y_5A?tRppr zguZ+Z&NmA=c_(>!AdpD>`1&hCJIPWf-VL7Op_kyNmk?*3QfL!XY#v{06W8q;(c>C3 z=$F!m%3Ak{uU-BfbCg*&#A@o{rreU*2#3fNZ~GQMXe;t5sfyZB?&RbCXSTu6}*9 zefu1WFy!1a>fA8r)3kzWSwS~1VcJ(wgH+T6-G7;jUKIdvQOiQy@(zA&KYH^hdG#=L zc`tzo7>PpwWiV3`MH7cm#eoblDBA$m5t?}s!Wi*g(AHraA%r04!(0#KRqmOBEO#(k zn%;O?-D8~Y&<;QFPQM~O?t`3uqHOQIEUxTLPOS`tMtW2jf{ZYnG_za9_>xnCmcE5i zCR--k@`r6r!C=d@gmA5(0xKvF1cTVXKnB;g6%1so0mk^)9(HQ?pzwciZFmA9vHo>x zsEjc!Ii^cb8JAP7cM0Ct?s{OMb7HJ>Y^=jZXqi3!>$SWb*xjw$RvPh_LkFfX{Wb*c_+n1sY+rh2$c2dM3 zCystU#{an^{CTkbi^u&v&%Phz{~p@=_vZTPa#??2K#f=206KjxBz-leh?bSbFAI6| zG~8b+0;d(^^ESlk4c1r{Z}uv{SQ8Id@&BR(j$9!2e*Z{L>yg}-zvRIoY^C({Ynl0X zpj=w;EgyEM9I-3wb^O+5UsGk%ooq6IhP9b~{Qg!w|Jjp@JfrqibjP@R^Qd#{99XmZ zv@e3suX6qqkLPoLmkzQC$0`oCAgYiVG$)Ump+d_StW zt3Cx@Z@l%Z{(e8=RvL+(+*)dz>!;V);k9_2M!9Ys;ztqB8`(cs`9E3wpB&CTiTz`q zb+@oCsh!--W8SZe|Bqx^I33f8j~~YZQX+pdDT9+Art!oNqJY#>^?@jOs{QSu{KQN1 zg{R_E%O`S%@(%+3S0K&cFL_ltIq(6iqu&R`)>Ol`Y=gE~c&+<~0W@UwyYoiAE7i@E zq66)Frtw`~xlrz9qMUqXg;~oQwtm*PcEY`F*|T-Yw{6+CYX#Z7?AN~L57Lb$Sf~XK zW`ToV1jufKHYsHDD3y3rxGCzQpN-HZ6%26X%l% zHhYwHdS|qGCw94)EMeEB1C%q;hIEendu3~^rT2^4vhioK@fVJzF3$!ELbo2MMH>*N z_mB{B2%O7+g96$Zcf*^!kaJ@H8GZI*z3-+X@fKrw>7pmIg^4U6`=$?jy6^8_dHU#P zB$|VB7<8Mqe?7AQ>#@y~zZ_pYaZ`Wh_3EXo(lgMpfJzClQR8s1+p;{iq;8Ft+_N0n zPe~cyNf}_otejRXohC5u=a@g1IX@SLzYdu94Eo(F>*oUF#{m7NTlkY9{K*#ow|Ig( z8r0$%HyMz%9v#a_^Zr}jQB~gO%@a4($BvKXtRBl-%FBZZ8h9~)FXO`_d1W~{@abzl z&Gh&C&wkY>Bzf}9jY3gO0S!qsueta(%kOc zu!^sr@ot`W?*yB;HQ(-KKf(&Y)Vpibe~=0a)_O|2GPVpjMG5cF^;j1q)UP~YF&oke+C}C#Mt*Zn=yK~3d?j5h z5GC{T;#PrZbIeX>%|MG`r6aHgqBXsL=tRVkE%eY<_t^ITXPMxaE{0b~tJ_@M)pW(h zR^L@m$xW2UmA8ouc-1W-Mb6m!6SLIM{>sUaz=9Uc8?#~ zJdrp1`!AzM@}Ofe*L=#FbK2Ptp&x#wALK94qnC~fL53}0V#oOzvwI~Y{6NP2DC@@> z zt{b*C>&9kN@3h+$HJVJ=<1%T9$m;mi^k+Fddr#eOq9`ikW7jrda4X9(qB5UfT;_KZspF z$)ia-m}0;zMX*52bQ;8#0$9QH8q5Oy@Bs$2#LID(!*9N1~3-D7sLyI zU;zsQpmsO~LT*dMg^m85o5{Vm`Hj2jm9xo(v+0Gs@ee2CA8ux2Ca}10lh6|Ps8-kR z-7NYYdH#5K>2{Ja(>MfEUo+LFnd$H?p&*U`tN;!{3GfVkIQT5Q;anc`ac2tlY!y(`x|YBYEIW1LX;9`wvkJ z0MozZ!3AgV_g};&>m3%7B@AJ1htc<98K(tISrhwegmW{+I`1c+l&+tY(65@<*BzX@ zQQrNs;C@T+gCV%*2!FD+e*suod%uO-_rjxpA1w*HLrW}DN6>Mr0o^4AWAhGuT^7w% z2Dw2xD5whj@5j%8C0Xt7z9LWYK-P9RW>)KS?F)s{XNvVNm1|!rmp@hL)YPK7xKez5 zHXW?ybzp6(uWMea)hejfJyWfCs#-4hvdBoiV*^)54sTpS*G&S6i$~X@PbUz%%=>jL zqq|ACL2AG-6*I>~P15`TvP%LCaX)^Bx$c$) z6eO2|fF?jH9)RS3pgVma{Pizg4R0{!w5-uL}W?x+i&>C5I}8NvYiehfoW z%sMAg-!JfgZf^hL?EKu_`L!qfxwG?2u=|_6`oVgJJG+F5->=`kJ0=AkvPvrt!-mA4kAfM zY2=e{G*JRq62_7QbHrGdB!D9e<;cR>XA$5R>OPjX9WdntANruZ0)uYq!ARgI0!Gt= zF^s^QM_@1WFzg(g0UtU7=wSeDcxGdGVP^;~*&An*YbV1?CnLb*gCw6`N4u{B_yhtn zW6FP8R=0Ic8$WF1{cqk%ZD#v>r71(mim?va6v8ys<$!s|9LfheihpACz<>krm4YA< zkUwClBeK*LSwTQZ$e9b`!cG5&o&J!P2FT8;s4{LCa{E?gWuW$44TLQH^+4u;ArV|~ z2zhx>zu;61fvX8;JlGUp78A_^$nJ*FPYc**9h{3H&gC%ovY&n4&bnyjT=(#PObC81 z2p(YN?)?(){{}nRv%OzOyT5mKe+zc*g`)o!&rs?y2}ZH)K4HV?{$l<46{o3jyU`)5 z!Dh4WY=c28f|r966eeup+(}ku^E%M(SDG!#>P^ZjwMt6mifROv_nRhGo2J%Fx`^J_ z@0wn!HNI47c&6H_pwaX~wdQY?Lb)e3@vxRnY~y-p7bT{1Bcy5Bw{_mTbH=-C&Zm3T zm#~8D-oOphz=jSzOz~Uhpf-20TSt*wM{(qnR8XpXNhDhm$`WJQ;sBO3h$D*zu!0+w zyoaOm0tc*ghd+Fo)rJruP%<34WdLRB!8jnb66p3p1}QMqJg`p&fHXd{H2@Rqt-Z;e zhZ*Raz?My7Z?OLmBa9d|(a!1gOziSW8Sv@aO{d<`Cl31OuZG#&$yPnhQP{_M{VyBF zI&=_AYXRX}K)E)0+xGe(U~S(50@AlmOo59^`@~8IWWPvkbe6Za4-5em)-1(UiM`l_jZtbHzv4W*#1S?{l(k=B|7|bdGzP@@Q-Zo_W`KZ zou7R1|40YsN>O2k;kBN40&=9xaADPHYSMOm)MjMJx<6Wv9PG(1Pi6!nH%yF|ps=xb z@7q*Vn-x`>6qH+()moG^=RUybM&_Fky{We!I#e_}o~yM3WEIpKl{A~5tJVLllKa=+ z&5btA)X?Vjur7LXH!ZPw4c9p9)jI7#nD_3O^Cf_?T|*9$aSvV7mj4PDz44%qh^C!p zZi&;tT*H$kfJ2ydif4-hSr3PBG#ixaDOdsE*SGM^hB|}~+LPLlc_?%h3MIjHX&}?` z;k6?WEPyyRfr~BR5_7OT1&&nX8y8b>pMpd9(%I=x3&w#M^6IJbnsN(ZC;p zHVKq1Ko)eWVFsG~1#dFZZ-b27q@$^P9Q7!cA^ygaerHO)Gi5dGvj)aREBmICcRMKj zIVb$Jx$}#&|9fx$&+-26;aa?h%8ch%ok6uu z%{fk%8E^R8u)jsKl5sRA`z^TP%%@LXni>r%N(~C&VpXYAQtMQEwWe!8guq5M-*u>H zv?!^!tG#MfR&RW%3Xlbr`~7c~e8p#NgD#!)xK;owHDQ36M4*JUFC#lkwT!^q>9sLt;O$zJiF4hn5L6!!jHFGXSo&z6?w& z;DH7c#I}zG4R1LbW8azY@wL%2XDK+Y1DU{&_}U zXIUS*WDHrc)7^B1Q~dN_(A~Giaj1EpQo$3mDQ;rmTv2(ZIXu5&W3o-veaHpkVjF1B-vQcYkm1{Sg3I zh4+Hf|9g^O;OAlgF|@!btj>L~%xG%Sd1B6CtkGo2#gLsI!paI`V_lgxmSm{j^xJp6 z>KX)9wRRC;hr-y!sb?2UZ`1YIAhV8V|K1KyB{h zXriz!pe;NNXP<^LMZru_2>69131^-LP(|SBRs70H@Wz^djkZ?vn@s%o7o8eo2DS5@m))f`fL zJEit+NL902S-neHvt3EOMNy?qL8aq`YSVL-hLNC57~?2NRa@-K*$65cLUc%aFuFMm%sX75 z^frXD!P49aItSHmd;O^y25pOR>TE$a^r31Of}2Q@t-wIEm6<%_TMQJoi`ZsPH2sb` zC+ZzNF5mvmu1$5$w)~WC@+rpwQXFJZnPb)1;8<5;U7KKBpJdclYcnwAKe~V#B7%D) zipYpv84t!gX#@H<^1W)scZ=3_&!!E}1}d_ijc(QNf)B$Iafl`YL>17t611UK#A z$>5#en>&A4dk-Ib|6i=#KkUPQ?{Uv(osAUjG!%lp5kWB)!wsg>1glvWeMY!9D>sar z7{K)a$1iO5)!SheHG+~dK~=q5Rc%mB17O;tqB*Sgc1-J2YdtDdRk$vr7{ebcq>OQ0qVu(Jo)Y5iN#y_>=Pn*jr)p#F{EUSdH1dRYH@ zz`#0sh=QGCU{<;Q#BD6~08cv#0^BcXlfaeAmPWFq@f>LcQxeLQfW`@MPys8lu=x?6 zOf}V-x9?luX?1`6+^hAu=Yw|tC+(5XpT~5xCv1*_;ONI13j^opEbH$o!;;JbrzL2=2uCjPc|2{2I>? zC!O3X)9*`e;H|(07OIwwX%*mG1o%cCriP8LqGIyrJ<{5p;&DbMe?QfICO=eXH!n;w3N~Pw8A{|wZtTR6_Ts4r3H0MMhA17BEk{-ckQLtbZ~t7~{Y}~Vy|w#? zw)M}?MGkhAhuYY| z(T;GGBP{JSm?H@SECf>;!;pqE#eqy|5M6@joa0vx@WiXAq3@0{kDuqOXcVh!RK9*y zqNZ7ZLDV^}KrDqV_7|xq6u{q#?qpx!bR40$(%}n70`G zjTF($PVEqW8`!JJ9QIFrcmWFeb;^BO+)27v?b*o%Pbz?C1XCl8vXIb%V57WD%i?;M z(sb+mV7HeZHm#@s89c-*WirL_%eE89Xm}9 zTBZlDvO`J22nyhx9*|99ihx8UgCi~AU9}4CX24Or{d)!c-1)Tt=Gl|~yOCe)1)6P( zXR6=)%{r2-M{JC^2`FZmJ0skOiSwqJ8LfZ(JglrvP*el0Z_RUsCIzKdMdij93e7K+ z2}-KH%IdueYCS5TRMpyEsx`k<2cWkpXtX|8>3pfy{#@47FysT=)=>cIIEV%=)6*b^ID{?^ zp@{;S;sAy;fF=!PN`sdV1IahBHA#j(a(~4>dl~oqMcmUDaeqILd;B8lFU1sjg-nH4 zRUba~>VBCug)NvsbKk!&w9u=HwlA#quAB_4UJ3tBNh#ZmPhX9wq^GoR=XdUuWQ=1o zXHi*`*tk9y!d~wB#nkw5!=j{r```SkYGkPG+w3r-`~s`|BD=g0qk=H~yi~)oCdZ<7 z*YXL!rj5`R;6kFu)w91g@$=hv^V@~loreW&J30Boo@I;fjZAdA0N1}4MA#1L+KFrt z#I^Eb8(D#+8|d^Q?=Y+`pb)=0Yfbie4NiHD&H0WlqefOS6C1dBO5h4TWR)4b$qy$9 zBdPnb^n)1YVIoVE#g^f)vt8pW`;+|<^cd!^L_kb17%uBh7hQmN&+LfuQn@@LQcmDL86)y7mb2b96Z zs?qsUwL?**RY{}crD~gkddmyd1_jj?P${n!JI35Ps4;`Q{2@+mKRu;~6yCiN)JMV% zfR7jmj^CjNOarFqK}-C=bpd*F8%sL``j%ko3E&CC0Gq@T2Qfupx(VRQg1BcPoU;&? zEO6;Cm~tMQiPp7~dxU=c694#l)N{p@zm-y-s(*d=vCzh_3Ts^#Zr2oU+YxI&9A`ff zXfm1YFtZTVG96toiZ5A?Y~^Nj@-nMw>BUT;5CqQ)L=+TTeqrBnaSkmWlb=+v?q35Q-Qx#z?*Q&;upE$P;6EiOId-UD;U{%PdU9BO<8GrJMEuz_Et2COr~HhJL`elT?>f_aq0 zmgMlICH%8*{Igu1G>3DV!99#0AI5g{1YQ2S>WmX3#2EEKAT#b(tRx&gC7AB#w56xF z`u^kOt9RW>8l5i`n_eo`KUHjct_Z+w08NpCDgiXZDw+h)DZNzhd;zLexk&+V5z0+3 zl-ph?H!7$$KUS_cd)>R@+e3{X=4B6YGKN?weOqDOoA`cmz#u5tjlkjcz+qCrI5l97 z8MMm7k%j)`T`;fV>7oeQNjOUy#Re_YDG<5#zWO2b>FI3S8+z=Nb=H8U|e zz4($rY)!LI+h)|@amCmnVg7una_(#7pnJh;a8$QP9{7tLl`KjoW<|{u@I>$3W@f5& zxaWt8zOd$oh$Pp~xnZ!pT$9vVyX=0KyfIJku23Z@yosIO%*`R}mW`Y=jGk5voRkvw zGX{^ddUlekx6mzIEJ27LJjz^T-A0dka=Ag^t>7nYPVk zwq1Q50Nmb5zy2A&!8zpk0(N#4GrxvkB7qOLLd9=#g2NdWIGn13F^Jqx6XaWf~O6C`{E^kdVz4+O2xb*gXDEg^}8j!C_KiBq`b znZWeLketP^?D_Ee&CIfexb!YmY_@YoxJ7Z8ao=osaS77!pJ8Q_dgBdZro3kWo zEt(F)65P`l0%8aKQYXDz_;G8O^9!eg#Pj9d|2pg%i;7A%Y~!YkA0!qfS%3tdyi)Um zUZ=tVm)sH0;$>U~C9aA6wR@*>;J9}5q-y*)e{d(QiyhZQ3u|IVwecfbg#rBs__34x z&1)j_=K=G_3GMD=MzU2$OUjt{3&b0OnJ8RKqc+5}G108C+^&=0K^XAv9q{TO@g5%Y z9h*XpO(G}8eZl=ZHsUig<+C*Hy)x~yH0iz2=f2SINm|AVI57vaVQiE!>EoA8Z3r6% z>x0AQJ#DumkZdnUrhzf#Gl2EusOIbTm&yRj4n^hm=gJ*QD(zr|QB>_!QR`7s>rqha zQ&0mf(}03{A3*lGa@PyhwihZbV1|96QYQDTK3%Vu;@`_i8sX#&GE@8M5q;!9aQu!? z0*1-K!=#|Gt&nLdex89_;bMRYd}|j?Kg2xf&`#q3temr0jx-D~{2U3McaGynwu z?fjf(Vrc8IZ*!|dXPe#Fup^{msb1 zaK;8Yvd9kh*CU5#f2TWWSI3!u|7O$F=-k}l*4g3O(c#uZ@aXUM>hJLAt8?usbLcO! z8!B-gFK`$Rw;05m&V99^4}0xQ_#E_j2{9&2T?j`HM%C5j=;{t3pwo87d%mu02Md-y zf~o^qe)D!%Ri#&1rB6|LP)W5atA@nL8GJIQ50PSu2BGM$is{y!SQ7n!FdS(JXCNIKoJFw>_=8-Sm(V^ty6uK zZ4Zg<_eq&Ur!C{Zu7SsD6WjQOrCUiw)Yvj=N*OJ!n37Tgz$NE@T`Y*nNBf&<1(?0} zf2&@B*Gr2v5Af1;v3VQz%{FnsJ98rOzr7#ljs zZzN{>xqgUGHfrJF>jpgYlJv5>o%5Fh3RmN*Hq)wC!@pJA6-B_SvAQi-XkVoMc&**a zg!kBtR~2{@c>!IpfGSxH?cXV3|Do^whgA3ryzY9pDkGND15*f|Ch7`6I}xp|S&cTS zO0{e#cWAA2Xe)PY`({Tdw(l!(?8&qx#94JmS`0>741}8XIvcc`BIZ$s+#IXzY-?Va zDH&-f`FKrZwM;sl6Ui*634G1MP9!Gu5KUPaBF1y4Jjg zxJiSo^g%|#AU$$$3t;*H>nJ4{l$g5^HwC&7S5?carroPIGWyTPcy0Y2dkHP;*TP>BMZr{`? zWG*qViXQci7@W5jSj&v)J;>dx@e1*7|Zr(3qr7Y z7tXxL*Pz$Oq|e=`+Y;Vu1YNb&WBVF%JoPsb&{-|Wq9K$7(cRM3WkI1_UD%E;Y+Vmd z)cMFjKsP>oCcb;W{`U3a>sJe}-^{9Oj;g5kDXH{6+_1{sDym(|%3aE;9ZISLY8rit z0AKZfRn1{V%|Qi?0Ts<&B~8K$wbtjVrB9x=6dCod`}Q#+hS+JtjJRQX_y{d{j2bk) z6+8ii-_(#9THqoZx6H<^^8ATHBxx5%ImA+rL&(RGG*J*&2K<;o9MA)wV)-)M_C=8J zJXm;%pW6>9Zu7(`DFn#Lg+`b}PoUDK(OGLj*`$yrdRiAFyOWjI!N~(hVgt9Jkz3Hh zuWaMDbnniMoiImF$pHa2abB=&Z&TFgS6;7_ES~(8kY@>OYngMtWg8(?@N^sBBR>$i3$>?pUii2Ki#4uFu1!W1Q-TqaCb{c0)YhA0C6WsaCdh?f;%CC`?$~A z-{pPp{T{cox9X`WYHMX`d-~Vir%#{bhuU>_m%w(?6>*I4P$9r^&*R<;1p-HJ5J*@+ zFWXuxU0shHoDUqF_HFF;EUkB~Y__bdCB~-nMn>Z=3@3~rZQ)HeoPJ>lGtP>s*&<}C ziTSLN`3%I@08-UtRL>YH?8q~-mM3~c!dH{~DU*u4ne*zI)3P~5{+t}YAkTx^x+2G~ zsc_quxIIYKYwW>o_Q~4}`TJ}&X81K<`Gt7)RUOltA6VG5Uj4w_|AM{$6?gM1?*5Ow znVW*re7^(@%_L_-!can)7+t-Y!#c!qW%-?|vMyEW;APG5W&Pw0ef&W%{n$GB&^z_G zu=sg*@1GX~Yn`OR(0+LlttUM*z%lf>Zi1H~XD*E`&EoFm(6<5nfo#P$%kcv@{X)xdq#z+FxMExG@?X5^-NSVg+{+n| z_7U#;2!zzxeb2=e-rh4Wk831|qJti+tn2R()|}fPkg)jcUvM{nE$CWI&vY^Y9R@<4J6W7gUeBWJ zV|j2zaN;p8y;462xcm3CZo6i(z*MkvwycH zJJLP)+4CTqXH`Q{{O#;Ec|oVLaQv~VML}p+Ys}+;YYa$QxFY>FS!gqPESa~Yx%q(B zDK8nkE*gEPns`$?{#ZZxu73ED)^kxgcvUfX$6Ef>+j@y>yuf89yFyrB>1f71)va-| z=e=|j_#uS82$4TZLze-Wmwqp%p8_n5mFbobr;ulN0$vJ*L^p4xtseH3XJwV z9#J0PBlFG+38MF(z`Dx|F=1{F9yDieuJ9>boMaAmG8_9NE88P0n>{ltsgc=?zR|3{ z;SAJSeUnua%N=vuZF4&@RM9~5>F`0UyMx~}+Sj?JRjkW|&%hJYVm`PR9%qeMB zNtl)4=M=dMCwa?q9K66gSGc_!?7>5h40f#VGR{8bTzoA&|5kebrReG#q$>X6d*&sC z^_%(;zWo(;=((!jifSwTLbNpf4Rnf|!m3v@S^GJB8Lml=Yg6Pk@8>kGXSHskJ9qFs zy9GnXC4=&c;Zy498K-@rDjDSz;Gn}E`C2b+KQ*pIRiH!B)hNHZ$^Zc&s;=b$h(TCcZ_q3V! ztWgkOx*?C;QwBk|8GMsv*~y`Hu+0h7(M)`zTWV=WadhA!TpLlY0+b8i)s5%iL^HK# znc4wuV9CLG)x~wk)os(><;WRv3Jnqhaqi)9O@VN8%(}!;bJQ{Yo^$;JbN4Ie?w7o)-w2x@h}b|I zxG4y6GbT=^F!pnJYR@%1?+Dv)jAw0QxYBI?a%S@?ZfLh)?5K27Q8A{d7(HXmKemn^ zin4-yAR`Jnh{?PB#dqY9cQs=QMtMD^*>!P0aCTL?xt+l{ zA;2tM?Km$7z4yItKdhxB`R1GUZ zSn)SMFxTHO>Zka7?#)ktBXZAvBMt9h60G#WmMcEUwp^Ui0OrxM{6={}lRO_<9mX+% zxt}Kh7Ue#%Q&u>5Ts(DFF?U(De8-Z$Z`%5`fA24g6_sgV@)aFu%xiz$K9|&cKpeOy zPJgYP`b2NrBo>Ln0Y4mjXr6!Dy7=iJ z-F5g|Pty=F$jijvSgVxjS34X>9gV8%eNF8Op?3x~&qXzFr?$y3{g=dn>$1VyGLQ_N z0z~nhVC-GX_&WipW(_=0hHlASs{ES%$Y3))_>Cd8)#B<2I=VOmgCY~tN^7fH8!Mu| z5#fnZi<$knjmxaH%NEpDXV(Lyn*xPUxVx*=c4*}! zHi94(dTe2^%Wuugce{f<=%Y9Uqip7&elI6rk~i0@3}kQNc_&2AT5oT z`a0-}AnJBbtE#Z$w5;v4wC$|A<*bscAaPHKtP>(fM&uunL`S5)L&7K=(#nb_WW{60 zWs7I52_>_pG$b$DwE`PZTNhK`8c%JEz(~r-}hL#__gEU?@O}3tSrB8 z9yqNXx~$&#Ioi2hS2`Heb5J{Q!IXaFiA334T6k+qnVp6Xa70s+?aNp}HMM?}a&KPc ztKOEtDRF%FZgQ&v-E&C*aAWk5JoBD0_fa_ixo7tC?98XhiT5oN@1aqz>%FZkVg|i> zq6K>#@CO9SeT0TqqSiC4?u$Gn6hiI@sZ9mQHy)GJtcl$ka z=~JiV`~2FE9qG5t*-zsW?*xN)bweNOs~KUy9ENN~=xBLsY6fU%M`~!rYHBBG=tgR4 zWj}qfgm43fz^04ahP^Y;dbge3PF!7KL_LKJMImpIo;L`O8xU^wKs~@{gG7M&_)q_U z>(uyObCV5g^GzG80|&b`8!M@m#jdUSfsK{I##Uixud;Je*gAqVrMmT1uWu~ZEp5am z))OY?0Q&LZdJTIM>=g*(O#7Yn=^VMNh z5w^}CTX823Sk*hYlghsMg1z_xiyJ&#JHl(Mj^?*qbwIxY0S0&SId9_u-!93@_O}Dl zS7tt{ZXMI2sOVMJbSbL3&uT^Ta`r(XWv_sFOyV6EaE}VO$3*UKE^8&5HJwQxOJj|s z@kTO)bJ=aX1)@D-%Tb~5ps?knRB%wl-z792<+mt`;Gb<)mUmuM4P0`X=PC+v16`hJ z`C01KVVoMh^47M^uFAyW){E(x@VTP? zq3*kCYr>KaV1M|)tOV|5!Zfr-+}#d5kZ`IA=Ye}pu7_^!GB-Cl!c7IK>WREXdETHr zVO+iTQrFgd59Awn#5)w~*Qn?#Qf{Ax>AJ1ew7JQOwdIP1*@CtCs+GmImBo&g)t;4= z%+}%1+F{+?dcoLy(!d-lti;rM#oP+m5zr%zy)XqvL^~k-I(j^v7u6b?tt9v9#h591 z?(z*~<*aB?Nmx|i#7Y8S5z7kf+F9=QCE@56Cx65$-(&uKf$^tb@)e(bE@gQN~xC{4;j%9ezrV zuOK#`l0;`D(M3_qSy9JjVef5m_jOU*ISgFH&P!7F1*z|> zu!4=6^^Lf?dVHN16&hOYb)J)pu`|j-@lEZ@DQQ^+RTa0Qz{3Y&-GEKpRqoL(_DH>8 z%?8~7;1>QF)#SB(c3O)!*A#l4{UZTmY9RAr-#&ZN0kl7 zm5jwzE+*G(XRsA{O=rZeyVA~^!uAVd&vi-9O-1KTRmUa#P&IT{)pK3ZeOV5$Qrl^9 z&v`}vRn^>E&hp3h_3yL$zZ~xWqFVVX9(&s}{@BrfTi>=-;A8p>2*d8$>QJhCr#~s; zSUvs2057S#>xz?$#L0cf6>*3_K(;DTNF_8&Zpd>K>N?O1w6DQ8*~J&qIUG{KW!x96{A1qkL;mzp zc2jR+o{v+2hDMUNRrNr8!zQlpjNWrv%LS=~Wh`|ypCu*Gq&VI_QLsm3ZxWg7`E`<9 z5ZS0*#*j!~NG8CFYs)&)7|;yz>Rv}o@tadF#obw74PDiKI%fG<1{ zmmUySH(xO`UoX9{c zO7*oyS_5YnBA0+>a7|uT;T9E`B_(F*1OqXZp5k^caQhI}TeMQWjLSazh=$yhe2X#w}uv-l(rlaS!)=!IF~6Q z&?UL_bsT#G$Clu^QUYVOfILsAo5wLFg>(tAZnLO-~hvyT+QR7Q-^B2S=b-#pLkYkq>IV)<+5VLU# z@P6*mH5Rru%6D0(07QHSMnsc9>2-iyhcwQWHpT?SK$4V z^$kL`G;w(^tHu&(D_Q&vENvm9b{%5>z}9l!(rC%T7zUhK zbF&d+;~pa;j_&g&J-uafOR>4dqPh93sp+hNdd)hhZ``kM(DU4&OV6DhVWyCNO7G8x}Lz zvzd%}Ja;9ZDaNzJc=l2reUZo!7c-Vh7>gy8rBbT6lp-x>NGhls)pc7nw1axqQ4RB? znsQi7IV^y%a?VOvr{!#A8Sk{J`K-S4vUTmp>BGN&{qWzvz5k!T-Tw3U{Xf1nN!zik zz>>~{(m^maM%RGm#%gxyYHIy{7Ki{hpO#LXSf1JAv@py|EwL;;Ej5C zi2#k(53kfFw!h$0zw_%poQOaEeEaRczd!u*Tfc?*o{jm8mGQDQq^IeUIh0qk@juCF z^;$aZdM~69Rx^tQ6SH|!czfXz$AG8%v|LlWPFt6z^|V&wNuh=&QA0BYNOYO@6ALjT zD=`bFd8=2Yi%RUWJbP7{Em2_Bl$cGRLtJ8yZ!og^EY;g=kPA5fT%h_yl6@c?zvs%| zuPEQ=%im!R-r%Gcn9-fA)|mtMRtg%GSXfk&)hr5u=U&-T0 zbJ;6+#!?|?rGmRq#9u67OcybiN?FnpnzW3yR!Lv4pl#ML_Um~v3SCyiI4);`f}FC5 zrYx*GCb3nOg45dObAI2=)aLi|hkyTk|KGp9{~u7^{@eTi``_s^DViEk){{~-l3h2A zu35+^nNFyXBv)^yF^;i~(EVP~`)}GtZbv2`Rt~?P-~apT`~Usz-T%Or{Kw6|zMlW} z&EXHl%;VU|HFNTowe*&=^`%$(v2X58!{noI>Ot78s_0P_C;3{!fa9;DHt!Q!S`Rrm zwOiWv**J~ZI89hPO@sTMlgo~q+p#C&3cN*Ldfs_@+cs#)Yeofxz z?WvC!J750!^T&UFd;EDlZE3b;Z#ivcGGzggwOEG5jg<}T%7H;DeDb_pQ>WEHf6mlw z(#&+yOwAo_(0o>+p_vH9PV))H#Ejx#U4gVFS{OiEPAzwxU5=fQ#>_z_y)0T$!rPlI zRb{WAW^bILw=Qz_VHtOk37oXkw^`>OFlQfgm7j`bA4}DuOz&GxKoaC0vvmVp;;ep2 zYSTb$J;5JqXAM;O6lb$a+G}!mEPW`JJ($X!$`vdZaF_Eq%XrpuA#1skFRo@SmD6X7 z_{-%iaV1Tiv&EFviw#38(jOz$N?@>XR>2RnK2Te19S1KPy*1f4~0vpWlA@`=`f? zM32Mr9{p6OAvbTc7d&!6`{H)_{05|O{0$6g@t#g&cHdV!eCn=9eX6|)yhnaib&`4Z+* z346JWC9U9YmUFghcn5W?g9`d?A#E>@eoUgt3fb~Xft=ENJFxWmVD;S;!T06E ztC#A?dZ}GSKELw%7WC@3$dDh*($6aKm+x2Ket-P!1lNk%M z6)USPJI6I^dtmkVJ=0@o>*Q!^!IqP5WZ38F&`I#&V|^<8?drX31W6wJ+*jlv#~2+g zfPeyxwYr8wMrUKDHbK8M7l8eRBeeJ=TdK%jQ)WU~_b+k|FVM2fOa(l`Z?Yg^;Radu z4z~}I5s!r9H-y7m?9N5bvJ4Byk{uJV{Dufh%FA2}3kWOT%eJyAkkS=H>x<`1W^KX*oPbzvZczqDWhn~526EkmyMs7u8 zSGWl%0A$a7e|_!u3pVBZpzzCu z^y^#MkNfSvjBq~01+T(@V`nM0GGDeZnKy++x#^OX)uM%Ezmaj{Q?Lls&e71Wa5ia8 zbE9Rt)Zjfx?)EWShDqA`Bxh@Slo#62I6zwq#4aLipAJk#jLb$a>?OjWx_S;P8_b4E z9n*DX`rbwM!8PXSI!kt)p?b_dg;afuma7%`aiF!ecSksS$UC^gO6BOegUlgmTI+bc zkP|_Tdx?Hw0%0ZjIMkJg)V9V@dJ`DqX}l$ZaIKiXS}Ky%G)t&LF;%!+%b&00%$IZL z%2>0d%-Le*TnQTzcCCi9Uc+6lVr`b!ujZF8VXD`2s7JY6RcWJ&+I875aMRIu-97R! zI&weQchx<7J2CfRUHVP7`c*#nS;i2Pvso|mn}Z5EgL7N`iU&f9hr&ps(Z%yIqgU1AH{_w~ z>cPvZ0r1hdt8HFE`{-#ySfg~bSte#QLkqrvb&Ijhuq7;5omX7k*F8LTkw~CJoWi=? z+v}~5CqNK)>fnNvFc`kP`Yk;87fR8$^^tFim2cPEzb|(D6&>@=$3tRnv}R=vJ+Q>u zY}MR!+010#3|6Q{{RRLs=oUZM72&;GQavj?%@Q=Ua8@SFVt;zMKOSX63~^!P2bK8P zr5Qhq*3u+ISPU*i56(u;9V9QF;KZtYi9CBlp0%dPT!#zRGwk72&i-ZQf%@h;3utL4 zZ?H#?xjVPGE%2RGbNlmlFYv3ftm&Q9zU8Fm!B{>sl%D)5)5s_i!s=;XR}xesjH+pm zCHE&WrZ9XliMvwFU#V)6)HRAJg5_G_ax~%NGDD68h?LH%S-PUl&GCXwDSImjJx^>SD z>p`Ev#HPi}Zp6}I(ar@h!);f@kvl@}fw+DNm=f5Pdf)qaynzPTN9`)|A3>g}Vo;P z*~$#4M4BgS>0rGqI4z;v_HcTgKP?N{APjHmk1Y# zC?KrZ4HbG#k+r4D+CI-YxXwAeMjzc~oIGMq9?&O`Ifsvgtv|!MeU0C~&V#{r`5Ll6wg%yPgNPFm`D0Nf z)3N2^)N*l38GwSduxldj^pehsJ-@pOKd=uD{53!0M<4I|=Fm^+;P2hcUlU$`154AFo_&UT z^A;vB;4D}g&zT#|TN+Q87!R8n3w56f{OoyH6v50O>6v!MOS6W-I7)?Yj*kP@%`rw- z5AR}G;$fL%ZWyJhmGDBhw9t8UHDP=;S}f06Rpzgq=53y0Hx$_$XOODd2Ui#n!8^Le zDBv{XAyfW~{L-YI5&la_ev+pBhRJMWtvziPO+3 z_ONCU11QW0*pt?D#MF1h(R$*k-D!+IEPo8&Fjv^HP|*M_(|n0=p_DgU#+oLwr%CWD zV~$9fBT$wL>lSe3V`;@xsa0YOWe3*o#q_;GcscneHGElR<4GmdN1?nDn8uCrayZfv z$?DnLRh83dVtWX#(J!Ytn9vzqI2Kko9#K3RRyi9}wis6~POOon*RG~e)-kMYJZHZE zPAq$rRRgNpLHLy90eRh!vUWgT(Robj1cs!lXz-%E_q3?@yt4JQrt7w*ghhP$6$&wDAG0U7sIO z!M~Pbe~dN%m~a2t!~d-a3mp^~@Ll_$T7Z6LVLD-M3@AkZ3*$ZmqizEOzQz-(gP9=5 zqsq<#tN$FZyE?KbzuG_5LSLYM9%FJHtc$~)N#2$*Pj#`jX30-=C{*P5YTSe*PI8Ko zoEEJr^R`r&HCe{`N#@=;2=eC~TxK6$XUXr;C%2jM`|OiP9FPw;E-;dF(8nWep5?9_ zVdl3oMpjdLXA?X7y-;hb+Q|W>v zZXcRElFu5>=Zxm_r%BAQ0_J!=dm@)Lif2yZ;pCh;omVrOQ8k=UGnrO3pGn!kvbG7# z9TIoHh<{Kj*e~Yqk_0>O<@0y*n-7ac2j$JX)wCs2*=TZcXGE?rFs~&T-x63b_?kEz zTG;!#Wbk$AbaeG{V%1Vw)p8m|nn_>7@OE;W4oO|d<$a2ZA!SXUta3zAJFKi3keBrw z6T6OZT}o2VS!wS@arb3K=V=LWoJxqkFc`kn)WAK}tJF7U7@9X**mj%S4%@g)frGLu?t75m2e1)A zA=~x!#sMufG#E8B?A9}E)zfc$_MB^HDlA5E&@M$5CRzIWX^sYbVQ@auI@R5{Wh|y) zIFVi)La*|LuqGQnEBAKv0+(La%c<3bX=$9~EO+g^T&l?3P{KhUWg2jsBR>$#Zk$ip}SCqu>&fs)qGrF>Ao$2)MbZTD) zZ7`cWkX6-_TGO9eIh0Zd2O49bDP~3Z1HgHnaFDoB7DepQUb{^#Rs7m_JN;)C9=jH9P{NB^T+<0do zMTBT-<~@1JFfNfcJ2COtdq90&k%>EsIItD!WrFS`#VkjSAuU?&u`f;Y~L?x+$C|g2<)9g_GTV$E1$Dj$XqU<%wWpLl1lobO1oYcv<6fS zgx3teE*}ai=?ktLd0jOhSvM0yn~tR{CDX;JY)OV-6Wy|dYv03l?B;as;=1;VdXLLM z&7k+Vq;-$bae(gur^QoJr-IO?C~1+C+V%=!+>C=k1yNf&U-xOfz7Yp>1ug9RtsO>e z9OfKcR-D~nfezUU8gZB2pep8h>!l9sTgX;_@9+NJKSF$eC#3&HK>odx`M3I_pCN(o zfhz3bp+b5rTA9h*?Kd1O7p%-DOiku3%%{vPJM>KIOe{$HdJ$?%BTZ(8JFhjAf%UEo zc4SrgHnc==+anmIK7u^&CcJlnksj7bziTvXbUA)zD}MEiBvuhuig;_???v@mZeug0y*4wRTwsOsBa$^n^5Zd?jOWE~#rUwuK!{ zM!8@#pG0YDhw417Lb`HrAuMJzLlj%z6jRFxrBny7O9BOiz(!(713A2r9mCc^6)lc}uP%!c*6mhHmEZDKQ|>IQ)+ z#WAH={#LGVmnhsO@gxO|+044h`0AnP>b{8LuAsV!==$kc@?=<9e@N9(aMesy%|tAD zBDQ`$jvV?^Scy;uG7L! zRZ;s{N%Iog_l0(lhE|BCHdf~e?S-k(!n(u8sn6PR$i{Kr(PhciecikE(jS4HDO{Pv4)`) z&|uR!bF&42^i54h^lVz3o#`msq$j!rBRyKIV_mFEU8rlJyDc{bDQb*p?2O=)`8Rb( z@<_h;=Xx2Qh6B@4gDVM>n@Ou@1;8_0g{x#4Mk34JR-z9sak5*qO#KL>Pwvr24?q&m z+q@wxpAweO^VY9OYo|mY{I48jPfJtBR-hA3>KIOFV@8%b*d}V|0IMfVQ#;?*hMwWa zs0m{TW2o>BH^$XdLfF;8{DRn2LLpf-YC9>T5-V^hLtb)i&lBuyAcX^gFJ zOC-0(*7U^H^u^Zo#X)2_vzbCMzInZ%aWlVhjlh@Yu~u_f;vB&$TDX=YT*Y&y(3Ih% z+WzRup2(_!$g;lBn&B|=P-IQd>&l@p_0JRGl*u^SWF&nyk+YP-T})~ar!`75L>t+{ zjjX0^Y|AF0ZJ*SBRM2z)Oy=CSBdkc4+bqi!DTr+{fTu|8;Z!djHOnPbQ!`WNDa*`C zWNp)D=`aqO7`9F@w@TgAyBo+>6$%!t5Kz>WdeQ-wiwAf{fAsbF9_asTddwe%S-+*l z{Rj-cMZLOl_foo{Hr!F2&z=t(8;+YAPnw#jZ*5FW`wd`=sz-gUSLt9$FfmNj&?UI5^7J)^x_x!wKcpJ2|`;0;k`5QO~rmSPPVDuFGg462AAU|))Q7QND>uM0$i69 zwDbhCt3tzQ17VflX31`|!OsZ7x_66(nmQ&<8(2u_ znn)C}B1&v5lQguWHMAl$v@=ajsNtT>($_3*G@~Jg)(}gfhf?c9S;P<_E}*gebrU_Z zr7liT9m%YUV3r5dD_++#!r|{^G{-X=<0*|X3~01Ov9!K8`e-V5BCTN_-Lys!ZRa;` z3Ch$6I$9ARxuP=Jrz$Lj;I)qsv3{2 znv9`LCDaZ^)=k857SjddG~seugBUGZM~k*|TDH;cyZIf5`E3Wd_QTwci&qomL^z-=^?DsP=u6SJVN_^iP>ZlhHq$5L+`051ZoOY)PgvJv z3?~~=7vnI@2;-I@`W6xf7URa(6U67FHC4g760@d2OXTRCv#g`*?33#(#cjI$HuLBX zeRQ9*dkdg3W>Jx~dYUCU#fpI#Bf~E3XHQ8}2gIqp^NAf3$%3lLJX2GMX(Xs;YiP#m z=vE>fm>B`Ax=;o`g4Gns;)gT&k-Yk_hLV70a!8jTri&BTN{eVN3*{Asa4JJM)KDHT zO3<3v&=k+(MRS_tnCx$-}s;-cVfzax)81gJwoJ5q3M$}HlQ>Wvo6LE}@DB5&9Z!x7|CB0!a zqiGA*BE>YUW%5?jcxxGr+nBcf+|~nva0l12j}<|}!gUES;tq-3x8-C`H0*9(YiY&m zK8?}QsnatOnOKk6ILte{0dhD8!bAx7JrBe&(nIcrf>Xy+cjUPT>H?OnUZ_W3uXldl zA3$5o&-ZIc;J2W_PyT_oo<66}UONuRDJwUkre@WXCwv3_)))F61}_?)KNIRdXY1;e zYiMR`YY@$z7g*@W>uQo6&GAM?W!~1zI7GF-BRk!-vB-n=(yGMTkQeOAuR#q-5(buH z!O&{;EO-4h7h<{r_8F?I9Vo0fg$g)NzRd)D>Es~?TBe;FyjYpNc#+%=gZEDFOJnE}BvLPHbY;b;xbJX=e8+$%c4pGFR53Zs~UXa+ly z$&TVzg+py^Z;0+{h-#%r3d&w{3&Xi(uUYhPZcB7icT#hAN>fuJUjUJfVKzolyW{A? zX^e??5&<5&}k+?gc)at2SFDO}5LmSzj2>5Y<9t~jk>Ge@+CZ{EW< zY~?iV<+dH;T8@aKlfo8Rao1gSLAgILg#C215}rH_($pk9(*xy%9$UvrXZL9b_bIr} za6xRlyB~Xbo}fJB9w-G0b%yY`0DSj?dweY`%r@=}vt0(?IO`hN@vxbk@^clX+K zLQUGZ$HTu_TPIydyWq*wk|(+q+FHfhnuTCF3ad9*)<1b#sH>Z(tzBww!V7h&3wEG} zx=LXB4FY z)Jlz5$W{&QwCB&L0Uq?ES5%xYjTXjiie@%Nuo~hx^cX>Xcn3SOhac0rZZPExspu5cD8UAC)|Qm&1(f`>SJP?BERdrs_&*EC&L|1 zAc1fgs;%v>t(l?oL}X#tZ|6MW=)CCQw&>)x;NZ6IhS>M;03p^BFBGV-s;Q*z$O})e zOE1s6mw+aDJ$j?w`hfoVt2=-HGcTWGH?Ivx)P#)-Y)*q;==tdA0KXatjqoJ^&p}h0 zqOIGer$1|HIb~tRwJ|TXGs!nLB$~XaL0Hj4omi31IJ*}_XVV$@G-5f%vbe*oa&yYW6$)I1l$L(C_NKVmETS3PX)&Z+0*(=BB z`Tgwat&FMll)*HB@?Wt_{JG39fhexAFGXPL6K#LQaE8$K?J=e ziryQ`oXTui!E@%&f@NHTgdkcaw2AYY=dle_*{qg?dU9}mxeuAW#ppcq*VN>gTJ+kxjM_UdIl7Bo5X;W) z5@+`vcaLLO;-EZEJ>1Vd5I}voLZYsGyl#9@KoY)#g&i!`eO>~0LXPm*c0exKx=&a- zqhWmj6R~>br{S%o1$3!U4UJlDZT2($Rs%KrrQg^TnEzF#M!BX&H1J*Wb}qFw!x=x% zw=&2xH%xl=B>K6wpu>M+KXq6VJGB+JdWzmW$FD1M)|A;>r`g-*Sw|4on+(-mno(tC!tXFf zQ!`XkC&SQ=_S%mehpI{St|$6a*x{_!Xm(pXho{DnI|K>sg1BZ%7^gIZS{guSM?f)U zb;k2M6S(aOoR$PSBZ5i|Au~eio1>_rNcLz-s|4S;oZBYGwy)v3*YiZnSkZh=Gn@m6 zVg!{ztV%ydl{by`iox}z@_lI?fsDRjYF`L-Ae=TD!yJlY4n)z%qB%2(?739>R3d#Q zj=PW`T+86DWwFI+TuB~7ae?ThsOP-6_p+=_RndJ>lo?|WyBpY31DFHE z9)O#2pXm+QI`!K)&pNn^9S{&%sWW2T39$oGE$)aDIJ$uoITZ534RwR^x&r74jx~_( z*WSo06bj0&+|6yr5h1ZdELgihVI}G6V6-$L7l3yG_$2(dvS3!#(d9mU-mI_Rs&CM4 zWZGn6%J#EstnmjM=wcTuz(%k}1_X1HY~vTPR!`d|LML`o$D}ae#7I=xTNkxyYgqYj;*Klt);fN zCyWSlyCbcYJTIVp$ zicejGql^56qL=LU5KeytcOaD3 z8^)Z7h1$xVhA}6ZyP6_cNf1ilhYXe^gS(#9azJR>$rbJAie$ttRY|+Du>ZQY^P;Zf zx;!!5#uku6ElqeKW1l>Et*HYv37)apn3dDAqr21zvF(Q3c1CQwAotvnGB<<@x+VnT z62b~Ith;)EJ%tqZM4o%X1cZ`7QoACh4(_v7?xPmYWD^6bg%Qov5EkVHPoKp8$v_5L zV?M0TwYBSYpHsD;HR>C1p6c;z%p2leNp{9yhnMeW!pcC_2RWBInWdxj`Xw5xb2I) zy)(SzICE}4eR4BxNSfLyjH-k2*vm57kdGLarWjJWl`oAXU#jJb^VKM5k6>~$~3h~wRI>@pI1E5t$(VI*3f|`I!9NV5o#wa^X6qC zi|q|_!i~oElE$`D2E<9zTk#TQ*7_NK{S2njoNW*jxPeYM?c^>U7B`@l277aW4FTI< zQ0C05=T`LgMegn;Y5yFSt(jAM=_6Yi!&~XiG(Kc5=fzIWfHQa9WW+n;Ir)ju!MJHFPGz zuZ=y)jh%@cehlbnF{$BneiW}Oj?*36IGG`u%@IwbJLk|H(-}=&iH)_P0)j7(^pacd z!>)P7sDr22m(d=?>kC4E!sluI>TLiB3%XpoqAkscm_r(8rmR-k`8IBsad3@RigWp zq^F+?zX8y-2EiFk?LuwcQX_q+dblKu>7&%)o#g)2gvsp$$w``2g#ikaRFSm_T$h{d z<6Fqqj1#cNhUw-WdvJ$axggA`fX0U1zJ~UxVDGwM_W~zXplA29#&eo$Dd(^20&AdB5G(R>pm-WupSDZU8NSrKKt^pilN-gU32Q74ZY77c*N1lU z6Wi&DT!JsF*q_Y|Yivsp^(43UCX0HLo8W7RWirFrtk+C#D7QI+*AXumNNO6-Xr9dM zS}Sf_Bs33W1e{o2Ss=IQ6{qYKgZ!$V=1Xl1WWoh&Z#c94HMuc}+7!$dg-~09X`LaA zfpGR{9D6F3JrmI^Non21G_R*MZ)CLW=5!tr+K%Armeh7q(4i>pQkAuzmA0N%v|bkH zVUduYU|AKTrJMRx4`XZ|qw~T~LlZEHB%LS2b`Hz%2qRE?UN84OJYhYz4?%QC0+zVv ziac~d9=M@)K>yqYA+dK~wsV`ZbeS}F8n<+tG;!`TcdfP469rp!MA$Wl*>_^xJCocy z0-ZV#wjw*rQoR>}8d@=b+T3F_buwYZfImx6*)_E&nopqk3ZLoMYG`rGT&9)jBRha3 z#7^xdEXguf<>?Yx+L|hJ`zq()2C#@!CA7f+8{Xv|-sbIG=P#Y*&jQQzGH?IBc=v|1 zdzH6$gH*}D>TFF|vMW$wTuiUAzFKPH7 zT3!&77S3yqiBbzINnK)lwc_5z^A#9Bkb|p3SqzJoH_<~rL zAd<~|O{c$RG)HiIvIWawq)tSjtE=V=9)rkkq)G)UcY|u$IxViRn1X>y#C@ z9u>8pklGc+pmZTpklGZbJ?90uOgG5QU_hBPbyD?=NOtx_E88U97vWH3p_kCqW*b|G zoe=xpuMWJt4^W=lkhVyV0|au%8M*H2vF_p_1|2*b*HLqqSxfb|V(YqS?YeC0G-l~i z<)GgbY}p!N)0OEuRO35P>NA*v=nAsy@we+kIqzEC;HE@R_nln{EV!t zQ>CR_rJ>Q>hmt`5^qx99IHVuWYl}QKo16 zXB@3~E!|uLqiRpLx&Ra`W7TS(x~C-9e& z8kQ0pB&p5YXdxiOd)RhaQOi-W=$P25ENVR~YgQ3kl!aZV`PuQ#07nF9X+~-5C2DC^YHO4KUrle})%Jq5jgkbfQz$NRHzc^b6WpOfDGmuP z#anvnEu}?DarfX(+=KM=%$#@T%$%9`y?5R3uJ!#5-%jV=wf6e0G;Jy6$@XXOjY2*! zKxP>kbiHx^w4L;REw%4k_~3H*m>_y|HTK(D*yMK19FRy)p?e-9ID?FpyCKaMD5^Hp zU2~H9iIe+F0I{TUS@>Y(G=2UE#yXM*R=E8e$uD0-(30Qb$*<)H!8NIB{qq57r^to3_pD*u2SnZb>SOHWs5MB2b2q1VH}Ba_dW5$f20|u;L70h2 zhJ$To5Un(T@tA?nu(9(-8bZEyjZmd-D% z(eEvt`z>Ai?_vh;Igi+4Ms2ZQtuSxyIM)VR|B~+18)oy=%lawDqLyM&N4ncYv}{CM z@SX2A6Kqaml8Ha39F*SMPcgXQQGhxcl;o2SyZqrE?7FtTLymGF&A3u zuxI$gR%-VXuSk>$cy=$8J`9F<2~-uH{s#Ic)V|61UPK z*Xks;NJ=?Gt#|_@^He8fydUa=lTkoPj0lqeb&-O%q zmeb1yVqXcmC(o%j%dtDj;aP-Tm#X*%w{*~mKFcQZA0Uu)@1R_Z9+)?mZg6zg0 zVHk)qgm?UqM%nkQ%U#K(9^}e6c6p(9WuOW*l;>7b=~h(7dD7`s(#ENH5m5CekpCf+{~?V3Ihy|^w()BMNZnXM z(^OLHO!CvYl;)YZrwd7~%TNKmx2#{Yya@ml)n@yJr3Jp3@sU?7O=z{kGW8 zw)iiW9s@4aFV@aKeJggv!g*7h=>PhU{SG)aQG3mia!b@$cmacJcx`9(Xr!+10Vss(5B~J_JaCwM_xdU7<~# zk@Zi5`Fx+MYVVqdu9Xj5>l(eAp9i*mh;Dro-rN`5(h}5C;?tZ#FH5FW=h9%UmLAzU zP*n~r6E1rd%!4{`KVTZc8%(SlO|F|vYZyyu98YPPOK+UZXk1EfT1ae~O>CM^Xj@Hr zzEjw@_ZV8|ZJQY#o0;8v8P5(fS_h-3rYOi;p+o>~)D3A6f9rNW)~STz)Y+HW)yan- znSekNA@WBURlurt^Lw2)Yyj5x*64m~+(%o&kUe(L2K~hr^VtUb$r?RqgZX3u1{wSQ z9`2Q;^Xmk=wMzU#q4UChr`c@h=}edLM3--|&ZE)J!x4_d;Z7qVPT!)?6LG|^p_oyB zml1Ewkgv;thw}%Pa}UP4vyu6J3r=R_zg)=Z8wnU%iUczMC@kUMN}SwF09Y4}qnD3k zR?p(sM6qjdr1dOy`Y?6!fID}byd+Ftm*xt@5FSIT4&F>1K1l1W_Kh+zW9dtU2*_J~ z!JqyNhC{&iqKv|T<%k4FW0qoRRly)uaH!ScuKYMRUan`&Bd>-`kH&n@jvBw7hJem$ z@0J`_UOcUi%LG_?Sswg{UcCB%#@>jQj);c#kUE}sb%{H#+>KYw;kEeI_Xaio5?c2> zw7v^8I*^~^Q58!r=hDm5Y2}5Ck{Y+NX77@xUQeF+m%I+)eTd-qhx7VF`6Ka--;(OS zK_@7+aXP7KCb4CX+q{t2vJel?=B32;)#N^)rR^55xS>$81t+yD~|nQSt`tjff)^`>p_ZHEuwN$v1o9SEb2 z#Bm4Qgd=X;4m)fM;S+Ay8uQ5-^WGBu!3z7*8uOtVCm3>DdP84+MPF>E&exNtOL0?$ z*wJ*C5iWWt4)ZD8`9p})Ksc^H6y5Ld^wHDhqlf(mH^(;=`)3sEXRqBqZtG#~9gBMf zbLguPL#wf)f_RXzZSbw}%O_DQXR#}1@qp|KoIyWLojpmJK1^CXNm&)AZ^+Vsg1B~; zJbwz~>S+)O^FxSWdO%b!!RT&%+M$jWfYDyiNA5HjEF5`kSl^% zHSw-hT=(iUe}0mCZJKM_L$7v-drN(5)7d2vl(Jmc$^wtlbl2)~UtSB;62lw1!}(2t zylU_2BDcyiC|S7GH+wa9`ZPZeY3vJWdKS{!7SNE-sfZ<2aA_5p^r{R>WhtY)$+M!# zqomWb;&m|ZWpK^A5U2xJ4@dF7Ce#ea)lMYVOvF}?Mb*#7H-k%E;x;WNHq0lsuBLPe zGP<|2x;HaBH`9S2(XtrVdz|s0m<@G)I4KC&fhl(Rd3PRyQYaz9e?R8NbstkR03EQ- zG`vx9-KO2b>A5xbjVoyPoS#a z=zbsPcU1cxKgZ|aLf&ttyj{=fguOlEK|?DMUzTG=x8g@P<0p1v7Y}2XPoh_a(W@dj ziINE8HbCH?K2Dhh+ORNrRgxx<1FXsGqQr&MXKUJZ@GP#ms%9?{eh(pVo@Q{_`t?p0dqSyAm#)$CK-?pyyVqV{bJ z|9NB`-@h)6T^&cNOo7yxR+UXHd(4EhQ`L3usU{17H~VZ)52W!cU^Hv z2#WOdZ@3o;K?@jUm}a8?EY3s71SZ!QuD#S}-xPhLwaF#K1oIH05zf9SbW^Bq*VQNDlg-|N> z+e!K_O#$J?#`+aZfF^`V2z{3@!~hiz1`25$k1|a*F;6ivOE$R{Z(^QiWm!zdmaqx@ zFjiR%t1_8YmFiZXV z;;Q(Z@($n1Zol#u{=C=06>q{TKSx&$$2N>7)K13n#-nQ|qub_Unx~@b#>1PYqM*?9 ziy-agTH>qCl7b}S^D@pA`iL6_u04sP^@S%X_f3ghtC4dW0_+W#;&H*n2qe63w zmb*^R?>c?9$4z0W^F+oxmNw-?0wes*89Q!^8F9c3SYyB3bso6u^vTj`*cMvwgweNb zsUqg^Fzo0k{Af4$VBK$P-fL~bV|mzh`5kM%lRnc(nJA-tEg%eW@t-5H{Xyt{Kd1LT z&cD!XdrC=f=0e^r$M%heJ^SeWZ8_rWa^&!0=p}g@i@@oATtvv*fXZwE8$QnQZwg?-{t zm+i(&W$+(*@G5+(fdthZR{Jul;bnAPbBLZjT{!=-<`8il~1X+59{jh^dW5 zo=w@V^-1)GY(`TKqdtWM#o^kAbpB&zEzh;8+O@jIt-6iF@Ac%p^5=hwtoaPnUJNEmx8i~wZ!c0xDT{WlhT)}}p|N8A=axz4_3&%JOP z<5P$72w!5cAN`%)xjMXKIXt6V_qMx2!SLN|XwQJ(^H1KxOHqRhkzeK`Kw-aa#!l@e zET2I18@C~fT^GfI$(7*;R6Pd_^>=DjHYG#Z?s0ALr64AJHl**_Czf zye2Fq(UM$A-%*HhT z5+2WRu+@i22=J<)tzc~71}L~!@U#CB&|eVHT&MySnB8o*u>Zx{Wyk^h4NaVIAy1>p z(*(wZ3w78I``Hfv+1h2`9(K?Q18vrETl|a@@tX@_t>0UsOFk3FoQk84PoocyVz#%! zH&*=C=6zPDz2*kpr$2JWKX{I|Fu&X<4JP5<1vs2SQpj0J<)WS(gB;$&12FIA*jWhU1TLdMssEnZBn? z-IS!j!1A0VqrX2Q*w_$q;cx^JBHjc9G9HOcK^i9`j8agh8AjJqVDQKITB_0YY?JHR z*KVX*+)cBxE+U|-n1rfu7C*&Pm7mV6e(YJv^Q&$S zuIUJ`dlg;(Iu>B9?Fy@F4XUjVtZMS(^?-2>YI+&*v^TV+G2rPFpV~xfr9Zkl6334x zm4^|Z1Yyd9(dD6->O_1=3bC9^tjMM6)wYdO`!awJ)R)hZm4l(RV_{H^sGE$an+$1~ zj%Zs<{AD}irGVSFn$))t|6(q#XCk_(zyt7t3IHHTHbB6~*x}~^&>KH5n8TZ(yZ|>` zmegx86yy!fn(o+i-F0|phaGUlesU%aIg-CP&_*0dpr=rI_+pD4u*MD9V7}VmW*i9% z&cv^dxV4YI;`8(~anh+I?oj*FvG|!%g`M3G{xk4CRD}EZ>F1=bFbg#-m)xka(O}{lzCFC!l^Y8wAN&1N4`hb zL(i^y-_B7{-vwCh4;5b&o=CG!q{%1Z_#<)R;c3bqjE!%F zuCE2H%=#^j`%ZoGoP5C^X)7TZIz7;&58eqS? zifR3l(D5;@<(Ft+I_V1$PXil(;?e^g#nATlp!U|F&Pw0bL`Jzgw#*Gv?tv}iU`pMb z$^+3gq4?5JOc|G4o8?iHORp|r)iiiiG;=DRc~`#nulyWX`pLgyB(!!qoIf7aIv3r# z7!6x7yH=7qS5vxI6FLV&lc@KgXT3(nz@>Fv00o{ZH{z8a`O1f?aU~1sq*1JM?#oM;|z^>*Y0#!+V|POF+|JHTzlFFTdrKaoE?7Uds`@(+YXyTZ!N{nQOX`1(@d;#A73 zH`}wX%)6`Fr{$qXbut~=bNmPH)fL{AEl_iaZ2O$h+Mn3+KCZSqq^>Qnwlx5f*~aIg zfHLGh9j$?_4?J5ES+!pH3O2UN4O`8@lzE`bfO6^U!i&W(}rsU%L>L$u|Oehk`p` z5Tt%oWf(;hP0__tw6Qcby!Inq`4BHzlr222>z-|hu{pqc3y?(^q$5!EaCy_x_La5M zJ1eJ8cGy8%!mtDOD?~@mWRMvb;tGbmh9(KH_z3*7@{8ab#^nCtA{q0Eg zZC^34eOk1>9lg97IyW0QHR3t>)_tslHIz^8kHWrYIkj`_yI#1y81a1uu)gv5Wx)5# zQbhlB$d{Rrk-5;3WiZ0=^9M02C%`t0gVn(T>CZJ0`kB@wNN2X>iCc=aZAI#~8Wu5S zu4@WgAG?C8Mk7%PV0#S^83w3SDEu0lWh2be5r#P^(;VcrOe6CQ;~S~Qw^9smWSd^+ zn%;~zy%lGEGt0*E2?oa!B6Xh+HyQw!)WzxI6jkD!^Bjx z(N!L}8ZUf}FSb4cUztF@#V>PZ0V-MhEWGtyOk-apzbj1NyJ_^T zZ})F)@P67B(9sdxQ0iNk%HjKwN=VLiWONzYriSEFOG7ufx-@xV>-;hG;l#Q)a$Pp9 z?lH5vgH!X;r{=9+%}{XdRA|jqSj|LO{d5?ACcJ7Pwq`Z4YCW-fB_{U~g<`CakvN9N zWtJBEEP^C}tV*KmO4*msz0W`RXh!`t0|6JUobxBH7nw|51XUGCQU*{i{Argyj9oUl z$H6}P+D%9bl3?`M+@kA_{VQ8czdinoBiv;m0*(Rge-m@AK$>=Kf|V;N!QTH(vukPK17%4*NV8I=&IUau~aD7PT#n-jT+EdTvOe-K*- zE21gYDRh3eTWv9?u{E%zC#V^Srci~b^=^Slv0C4!js7i7esy*J)k#cV2&>wYR)%w_ zbh0b9yI163Ta0(CAlmX+&Q)yZDo-3g6kiiXs7@eOm(Z$uJWs>$Qxqpx;8SiO;? zST9kIK9Ijp)z#0Z-}Q+B@lOZH$g~+WXHwABTKi^?Sb`_8%Dc zhjP=m^~mKTV5UU_Gi@8(t2Aj{4=Z?5?yfR6>)Qpbfih0ZW6$-tASN~c2kb7B02aNcT6)na_he(SBOh%c zTb;&Kq`FF@Ton;)T@drqp9y2j(^%Z|d(J(U4t=&RgD&_9EO{PFTyY_;Vu`z0;y8vR z`dT6V*Sz${oaDDz@ozIA!e6IPRL^#gvewtaSLXa?KX{B+6TYN5z4Np0#adL~GKJgj z56L&{lO5}xV0rn@jYa5JuiRd~@#=fcdHDg5_5Cy%FuE4Dd>FNH8YK|LY)ardRpPoN z5q4^A$+-K<HN1CP^n-Mcj7;7F2)8Iqu=CWTFaNbw> zysPl;=CT??DZD^3KZsHr!>r}98nRp))7|RQT&v<~jajZ8#a>{m+aI~NJoM~@)?T7( zqYs%+$2_vJx^I2wzU7_A4)>lo*;hK*KXS4zz}XZM?21|F3RgVvX`lFGs*;J7_i1G< z?21pmPd@oQdBw@?<7BkEW!8HqCeX-6#@HKXk-^xCcK@;--zVvePFJFUfIIc42+KTF zZ+y=``J8|A)*U@iUrefgJJS67clH1Lq5O+Rb~GkmdaHb0s;W;@w5CblRm!^_$ZE6Y z71^3d&Sikxg$H933mtPD6!r%lh|@0kB@kz#z=b%9CTtC*Nq=t@=~_kSPtP>gz9izm>s;X(&zTgruPhdas?*e<&+O<$C! z@}gYe3v!W2t^p#|0GWv}%>21T5%wr%BMkBosC+=yz%UPClz~8IA`R0JCRs?cG^8mP zWtxOC$uKtO8kt2KnWSC6k#A*DjIl2xxim%6pXGYKE%AI)>isO!tvQrd8${;?Q7U~% zwc#XQB&9Z*)|5zZPNcVT={-5Fy*X~(1+Fh2`F6*wfM>OXg7rShN&3$)=A|ICrVa~Z+=hSeU^bCASb4cgl zqv5@-uNyDk%{ES)_KsaNcg`mj=aU;+Jbp=L?lSOaq12OHww&*w?e@`q2~e%2sxGFL z-?!C&Ua9{1L;bJ6s$l!#-?g&8X;pt!tG-KQnj^7jP5P@+aVeKgyq8Z8=!z09J((H` za}!4!u%Qmz!%W&^7oG5HE`(t;abYl4@f%O5E)}WEgo>h5Y4(vQb^kDNV=a7s*n9jL zd#si|S<4u&XH7qKo$ljIzx14Z#aa5|y*VGavk|?s5w|`Uu|6NYHW$A*9XB}~KK40y z z!9gyt!$?#-!XOcp7h#ZqgiJ@TzdxUVJ2C}7M?T45OG`a89bVdRLCVckx$K$pw++poI?aFoMg8Xw zSaz!T+qvwoGUXpy)xW+g{(cVIQx*UIyX>!O#lQZp_~T0PsZ`TmbXmx~@bo&v(4fB5 ze-HcNE_%Wm^U(pf@+DO9mlBcsfl!%urpP;%WbGfN>~6+xu0-uDhaB%lO2lyrEmw7! zp*l}fpQos_2^w9pMw6&g$E(y_r8ZT4m8Q5zm21+J=XuKWETtx0uF4QgxhKNJePP+c0GjNvpNB&d?_Gyc1#f*VMZeq$s!TAQ0hvyyzAj-9 zWr&DGLhnXDyBGCSe!`7N0P+tKkpzqTP$mgTREi-g)xDD%2`p3R+Nj6;Jv zrZ<89HsAeKrhBJ1u9}Iia6{Ml;;TH+wSL5UKQcdn(i%!_4JJJep|;1+JEQ4M;FsN9 zavd#zl|j?9vVmi75NTo*ZEli!`+DjP^K^^rY4>iX+_@2FaU<%+wJ2jVSY8CIIS-&4 z{jB1~c;4exFlLoaXMYau{pH2F_QkxScV6B8Mf%|NT2gH_r#_k5p2Hdqpq+Y=BoTCF zJVRURdfw-)TjFX&RVr1V=J!p_-%mCFkgEUtT=`F}>JJr&@*gVYA3D{azp4NAH~H`9 z>i_vuuGo`RL@7U2p7#{!>T-1P(P}#F1W%o^$A7RycUU;BeGZcTcpy~e9m_M1MCk{| zDf>ssr)Oy*DOaN4N);(md6GntCRL;3&R0TR0x!UHVEmQ8@j4(F=3KKvK{V6~kth6t}AP|WNMd*pj05NDZ7llYL z1nM#}*~l>6^coxniZn5eg?Sh-=Hk2&8>)yf*x>R;5_ z59+H?)nAuXe_2)kwygeRSNlI2^}oMs{`)uG|NV#d|N5uwLMkaQR2D>Nxk0+(sLSef zT>wYx%2rYt#{_CGz}oL6zRVEH(~gDlM@Mm|rwKx7wn&*HlygOjG>JN0s!EsXpJ_5x zid>y0R|1F$3T3<;poDjnNpdw;u1b_E<7J9Cxsoearsz@D|89m zD_1`hD<4Z#PbA7bsUkz7$&~4`WvWcMCI^03rpTAba)f7DCwrN@OKA%Ou>-Zb>x5#=sfSx0rwGGC&M=I~s+IKp>)!`fN7_1ci#fW*%o`91CvR%sAij#uHnMO0-R} zqfLR0W!kOl+4i^ZW2}p@wv|+8zB{4LliUqA(hfkI28RgZU@^^{)Z)(L~6-vRh_6b)V z9e5GxtMa0$d|8(Pt}1uduXNfPowoAERiunPJc!s41e}~kik0~ib%8{kEY)U6&-0|` z*)m<0OqV7G$j(<6UAkb z`l3i7y??NpI?)x_8c#}hyd7i!BOCgkJQ!_g_XMF3F-T+rlrr>1DnvYxolwXCltC!) zU5yQMZ{Ezfb3NmRIh1$euA6~R%yYV1Ot7or;P{@zMlZe8v(Pnohx;~GkSH+_226zh zD+7%RtOR_DpzjH7eXy~lnau1#cX6Itq1mO7KItLA9?f;FQl z=M(AYtC{Ef*_Xomm(uEslgjhs3Z3S)_O}`J<&082t^Tp8IUUzkW}Ih6s{Gu~U~-v3 zRl8EPu8b>p#+o~0wU2#z623L>xwGPRCQlKm@+4|d(nRTbmh?PVevu^uK+n?@=NWPh zSFTM`YCt7HTVoZ<~yhu>FHc*$WdHo%P+GOSMVZFc>zIDnp_hLs;X4QsMN74b(~5Q zt<*#+Abip$%hic8H9(mGu*$SqQczV*u3UFtrpc3mnN{UT)u6C>Qgyym1+W&1)kR{> zV~M&%s(AuWvAR;M;)&FiAYx6mNYfzJG)PocVpX*WP?kLwNgs+8MKW!%Li&vkNpp!cQBZ3`QctPzW&5psj&F5r-$3=y0SV3QlOi~&|4A^RC3{7g`uriO4-)c2=vg`Pg(%SOSmFeDi+5FzzILz5JU z4gcXbfEt4B)wjYCda?Pbp|^j&8D(bHN3`7zCaVJ}IzO7ihc1RT4V!Z0Mmu0rKn`7L zM*uO0cId;{=P>qN>AOt&E}gnTr>zr6bI!PV2kbJmW}FENHn;_6+zJj4hpQm%g)?*e zOv=6oOXSHCv8ksdxOPN6!&4411PQd-sig5d=k;33NUZ(Zq^s;IPYgeKU5@PHk>WB( zew8b`e4x0x52C!xQ=Dfj&eP?(B!wnfsZLPo;#HbBr8-`zi-k~Gp-TsmooCB+S@0+2 z+B~VQP@>D1oj(9%<+?(-_JK?TdYUWM7D_dbB$_8uZG}WzE!OZQTAoP56RPTj>Zf8& zn@H0x)^>}veG+ZAMAs$Owuv=OVijMks*>uTe4)JhOkQ^?uYwPN{E{b@mM#r)JJZ~< z9jstGF4UGIk;o*7rVz+r{V1iLYY`4JS%xNw=GVE`u4h?U71-DTfjry7GVQuW^0nKU z*YBj=xSeQrJ=V}9%E&m(&@4zlou`k?;jcsF2A&<9EZAF5Lj%{J4i}IGe+pqdyZ|P{ ze;5wd2)%lGpirfEZhp42-lJh%Y;Rvge?kji%t-b2%BWw78SQmA?#9# z2Xx{Ald?-A9RSLn^g|Y9kIme7W$e1s_gM6OI(>`H+;U}ZyVACq)O`l~fI>ZFP>)y) zA)6&;(`CMNWjI4w9ipmFkf!^Ky;$>j>L}fMgl1PywAd2(C@w)s0nL2*)f4&mNAe#J ze^Lw-yl3P+Wj|=E-#h za@`ZTwoO=8gFL zi|ArZaycitnvvLHe>GEOly9Bt0b2 zekxS=3AMv#x&`6ohUnLQ(T`*CZ~NjOd(vNbq`&S-e;i1^?};xrrB@r$?;GOF1)XAmS8PkI&_K^tB z3FtmN<^zE+OeYVsNfRvMB!js~_Z7J6E#ZMT{V;&G=Sx2Er-=QjB0s9omwN0&-sKQC zUGd9I>#BC4>0vv7yk6*?Swy4An65-t)t63M^3;~D@q**L}0Va{* zx;=@!geR|3DFP~GlSlyMA;sgAO%u5>q@HYbAX^>k2C)QWE|);L?9WTtpIX_!RMJ0XvVV$Xe~6TS z%2oeTEC19g{!q&PCRY3*k^g=s`!AXF$G+rBAkvMC&L>5>MUie+bR`geKNSAgzWAi0 zhvv`@ha_BFKHxD!G{QGFVakWnPr-J%IK0E*KGBF@>7+3_VS-MWq%-De!3%WKJd3)> zrYw07mplmT9)t}JVcna&?X^B^9$6ZVnF&h1p<4@3A=zL&f@U;X=S2b)`%of*ljv>mr32F(qNnA3G8@bQbio5GMKH7 zVr$Yolrzh zy4O!z1SbuGjym}}H(+Z)KE?0V^?rQdN>nogmdD zK}xI7Yt;FGsa#hlJ#Us?4k*4)$#l&UO@Txo^E?yl-onpc{<}zWIVryQBL4nO{MQZH z?`z^8lSk?o+o$}Mtp{`Kg;OgJrUXT^yH%^ljT@&eTf&ZA>8m~2yM5XFJt@fBJ#pWj ztZ!fTd{5H7FYP{%_U=nMcZAJ5XHDD3l^gp-oBKtA{Sv`u#nw)>V6A3xvf_Qu{c3JV zw1Z=Y>77Ok`z{BUR~Xy~jWFX*S@vSAc{4YBT~|D43$D}^clrv4vhGe>^`fnLlL6vo zXt;1l0ybfdjbEl?muQ%IDrS+2S*2liSlClHywsPdh@@z88JY&Byw6X%SRs*pP@aEP z35qX2`LFr`OVDu&?=nZiERhIH6w(Tvyhf#L(J0#t+AfQ+&Zf7z(u?Cc@24v^UzDwb z|79??XtZsJl-#M?ZuEV3=AIX8$Bnt;#yId~oO&_O+!^vfmL`_1&2v?a7K{66Sl39OoCsZ+=kBd|D>VuF921mLANPVm*85E`$nwkk3jLdf z()0T=b%9I`X>7W_=%i0(lckzesX9lZu8^KL$#qRKZHwgMqx5oEAIEAc#kv-;rc0vj z5njBN{yHW;e+zN1L{oRFsdf#q8nv*uLuHj<|0})UkcmxOLjJEo$GD^&BW)9jM

    =)mukK7Rfb10YaKFs+k$D!5cR$aVZ zdpEnI&!fH1qx-S@tD%7RUxHqJ4tzfm`e7>U<80{odie5T?D|>MwlsQ28VBOJE`@q) z>ZTMTnj}E;U&{fvmFa7mg8o;*{zxPcM}bbmgC=D?tmquT7iCm{HqAp_%R=7HLYZY7 zUE!gPd7ze!uR-*h4#)UPoUv)#)oa-{mPKUeQVzb-gH#_x?@D7oyYKa++Pmk0M@uGK z5KXIyrdFpg1lex2#oWf$z?Pn%W+0kE7NXX>1v0_H)%jN^vG^hEYEOC@ z-lfvXuGr41$icRl;8;Pj<+GiuIL=j`ctI$kCW=^{K&mdGSM_?9_4$>*^Q)POXj+YK znhL8O59UvY*Fqw6HL-Lts-T|1zG-3!1uy&SCGpf=8fJq^ICdwC6X>cYkBj%d+PPr$ zdXi$TL^*m_{x(%x?{l8R(#A2hiA-fAO&&y72hqOy(X~E|Wje9f+U9}bjS{0;<(!;LX#iH`6QMI3Wa}}|@lhM}3>}aRI{pj<4$md1B_uFCr zfpLFGH+@-)Tsi_~S~M`zw!yqglh*XGf+gkcDwFrssr#ywJ$1^aDt%d=_b}8EsAv%= z6qIo@5r%n4qe7%1oC1__A=)e#Bot+mV{iq8Hydr3VQ7+KV3KG8F|0|3$(1A{(?qi? ziC3-^I$9MoU8=Z5fj6Z)(e=q4?4h)###e+8OB2YYMgCYTTBuf$X>#FvhTrj=62CdgZm zHM(w8TFb4v!+C_W-z4G=-AHG5IMU$&?P8F2DNwnetB?)Jl`As&x?*QU)swF-57plH z(H3&lX)Hymt2D}05y8;~u`c~t(6&5$Z(o_br%K*crGU${s?Hi3jSMwL0YxeSsue&iL?8+f2Koa%ASlBeq+veN zr~qk{hX#MxC<~k@v~fDhB;Cj~$;c$tz$6P2iH0VLMrK(zZ`{XP^V!%2A96R3^Sprj zw#w&Cg?BfP-55&c2T}w<)Y=$UEsx!h<=U9;R+r{l6;E%>a_uPg0$tsH-@WCYXD5{Q z5?vd8C;|rdzK!J_>sxm$Zar|Ydgx?d>12Q3$+`ezaH@AAb2Dn{#FgI~fF~>t6KRn7bBH3$QOrgn@{s6!Ko((;hcwJUqB2niX-MNNlxZ5u zgoidsLK|lonehxwqYaJIu3pQxG%v>5myunXA{mc!Jztl2zAE*8oaxpaO0NxK@Pnw8 zKIGbPGCz`98%=LYWHcu-T6v6~9M|3)x9$Sh=l6ZP<6T=LnH6l8`wq8r%&#Py8Rwec z$g{kD&(`w3gKeRMU9RKpbUX8OtlfRObB>E$HqqveyF-zW%iS>NT%L1kxJ`Nnp`%l8W;w4J{tel3BYcxbzQbe{rLtEsAs zDdqQV^`GBV|M;Q)=U-JYeerj#>~C7tU)8Gb5}D>mELxTRqEuYUWfO1ZQv;TkVSNjb**ebANr8`z*(^Er3?zMXq)yRC^MueF-K0q^e*_O(?k` zhS3m7ZH%FJr@3{fuzJ$HdUvnxEXxK5T+P;n;Y^UaTmTnR{rm+lK*vH@;?_v|8rsc zk1y|!9(2#96y-8X3aKsGoLM*Oi67-8gCi~V&~$idzXT~aQ{}S9%3s$tf9f><^%wP@ zKVaCY;&11&zsi(zx*jw@s|>j`mRu!cc#cYmSpW8rR;9TZZ1ddEQK8JMoPqS3N24{ znV~vQQ=g}(v=u~5~Xakcd1H;U#W_dQZim?t2 z?%3W0#_N3d7n$yz-uP-3ros(V<4dUWz|{JY>isB!0BUO}tu>hZD1_D?!|04=G=W`q zcgb}$2UZ4M&&mdlJtETBFxt#G_2$*oYi8-@SJSMnr`)<0XMQc}+Lb6HQy5+ZtT_*$ z8~x1U#&}xsE0{CNrn5hX_Wts8P5X3C(L1MZ|0KQpay6;8np>YtYtLbi2GCEv$dU+# zGM=d|bv^I%)-CchqAHcDPxITR=J!+0-=*sRI#>QftNKF)NBMV^@(-Qr&tKL5{G0r@ zbM=4!DOc>tDx#DhD$jcgbagqp_-HkQenOyqwI{r@z;u{9t$qxW{y+G+ru+lS&h0(pZUXkS5~~88i(GB|*mRPRG;@T0VcQrn|gEg{rqUveeIA@#PYhk>4g!a*Y3Q9!&w1fx(i&*wy~GM*W}PHUIUi?tl41`#=66yO2uC3zY>CT3(Q@IO?)G zT^GRBx^k2><}s1h3$XTki7zvR^0Z@N{LxX|>1l#cnk`c12<1GHB2A)Bm#Wfb`fHj@ zl_FQC$&~Y+rLCskxfG?_A8woH{N*W|!gWr}=>EJt{jb+VVayO=gV5Ia!o-Izqq zrdfqwF#^tjzQp`fmH}eW+tFxL1QHpA(nq^7aM0-ZD`s(qMzLU~O^xy`u06Chuf*6C zJK7Z3Sft&!nr(mc4%WIDXIn{g7Pu4ZJSj~9lr}$7s~@S+hg3yyO22gtGF>dd6h2Ex z1oWITkb0R7GeUu!SfSi4S8kRn4<9Mj)5>pq%HJgFzo`{}RVX*6v=4de z=)j9eUzHbK<;%Vda8t|DdZ;X%aCM!?Bwq*$3RQ5Q(m$x>~G^gK^` zo-Na5$#iM*^K_XeRjy4{XjAkcs$vytxF*Y0NeXqs&wHK%?)8s=LQYrcPliI1B~xd~ zL5dZCb%q{aMUF(7FIMJ?6xl*)x=@;NDo#I@79d>)QPUZ)_8KdI8V^F9BNM-1gRLFQBJE2hlXhbOR zU5yNKuV2r&bv5If8KigOu9|{P%yYV3Oth=v;su_hMlb!TXJcvz4tH!UAy8r>5iF$s zm4QYDS^_>rQ1^tgKIm9q12l{Q3^G9np;6!o0LjxGcy#b%{NK+6X>~;EQ@9pCj~xPG zg+SawARuC;q4cio0ri@@{6FJ&MwmOxq&gAH-x!S&9&1lN` zMEdzk=J|g1rSQ(BwEE(t^8C0$r+KOUby|HntyE8`e{5<_$90t%=b4czKld}}TxQbL zt~9MH^P4+!)t$N0$2mO--S@t@Ur-)Q}5;X{EqVzmVdY&u4$dUn|=V^-b47r9U z*Cr`7Ad(=hu?l6JLY1h{#3?i}0Io_6W;a=>NmgjHCvHG4+0q228Sp?@yQ6`j^iR2H@q(wq`kwjIb(B0E& z?@14`)&^rn8vVM`X!q$hF-FE9DFAL5sAV)1@{mvf3PGWKka~L!Y?){S!+298(9Ge$ zT?F9*6@BYUfumI^(Yc00sQ0EcvT@}^2gqhXhp9WtkPFTAMh1Gy4SaH7{TcG#$kI?q z4hp50Vm+4(Oal_`p%@BRsCq-q6b@i&heTK-5Oye}BMNDS)TeU+S*ig#>V{dBy~O|( zJI5w%xKWSY=|>#;z8h_iO*>>T4)pi*T^e_s~XUHyc6qniZ%Phq=xXDvqfK!wv*TjOTDpfHmb*xGqr_w|# zHIWK%pR~zxb)rlSP-XzEGHsR=L{*b3*WHn6@?@Z9RXI{M2yC8Ioi9}Ztc7BAky!IU zqArnY9>P_ut`w{IB6TGkv8Gz2X%K4~B&sU0s#*jn%N~fN_r!`KnYLJ=eW=tt5DN>p zr&HgS``)A51tL)JZUdCTC}bEK2`U<-HSj0ma0L||jxvA-fdE5vjEP~UxtTG%O24QD6fRN)I#?NrBk# zFKz>fA?RLxDIBRkHa{iw=FbPCOilYpw%frJbs$yeM_2eT#89T;P>b2DhPXF&D=hV zy6?djd9pFkf>mNE2W-m5e_|B2F8hIS9w>iW?5Pm*w_JqJlotN?W%e5m7AGY zZ>3$knP_@7*1$N*&?wBnG)Ui_r}xa^+re`K%ML~s^sT1>!u6-Y1!TdVf*TJvz-0Ir z!@(M<7f%l~y7bodk9O93beznWeBw$xU=Vg$FldyxMI~)9h#O?$CI!Dm!*5fGyEM`P zgLJ^6?$XHzfU+m!kWJm=u=ZV>HcCb_8fsW%CH`x+triIw>Eqfmms8oX1@H}L;3gn@*nr) zKS~ups#HIURlgLgzu!}R%T`^as?O6@x+L{^f>N8PI!{qtq$mMyEg+tuxB&6Ylj{oP zx`%RYrBn;1xj?4(hjWyGtfo+^E|O|Xq`G>ku3f5YlxUlz8opRvCel<3)eS<;EAja! z(Z!hLa#r$fR&qWhK7TLKJ{N0WNwu#f+IM2@Gl`~0tmzf&o{QDJB4w)(q6u}Y{||XWuZtXKr5UU|;KuX~E#TF_>-~ zrW;S_#p0ika35&+Q9ALf8|5x$kwhojLUD7{Vqlz%E= zJ*J?9!JYz|U`$~oTE(?%qxRMt6vs`1^E%08or>9}<9AuaT{>ZhLR_bkb{V8iGI0Zo zTcMJcC@|}TxJ3rI2@4eB0+qB#rLIz71_*VHL0@On*BP`8SJp0vFb^Zx;t9l%zJNrW8n6!*Hw(&!*H20N_vr} zhxPjd+4mCpFGY%90oF3rUn*5UN|e9cReissy3A5uz{yaYr^t1w@^gSPLw=s6(1Kf) zB|pzsT;$8o@5wGZW#_$8O^*EHzWlsMuDh?7R&9k;4YJuFy?iaX7?WPSmt2gBwQoi0 zM?!Umx>rI~--w}z!49YNvJi#VSGFb}@-wjv2COq(F90t($d?_dXRIxuzz9$TGQ)K{5pxafyXZs2upb47LBw{Cce34Ipcz#CIYd6JcA?5Lnkt9 zw6v)J1)QWM*#-RLb zwRpC&5n3L`?7EM72h8!z85QhR4ISCr%A%69t_ET|PE)H+-_z!f_X9jtUL7ZR^CmGB+dhk4hJjbRj zaHxwOq(u+nng?;6OI-7&Y`K%y+^HK}@|Fkr*pqbXMLcmQoOzHA+==@v+#VBu=t_{e zlfOkWeiU&o_#WC`SLsu)lVrvg3ufz_Sa8P$n!+bS0~&&jx>WO=)09k`m;(RgTQVxXuB-hE{zV;EKgv@3yUV=vXsFb zbreUF=Amp)6peO>W_p)j-8uWqo^ZM2;LDv}y5);rHyEQd((kh}?JC#kLmLn}`FWw@ zTdwlk9TnKt?+@hP3gsZka4vK8U)ANx!O?|yN0%uFtEvUV3O8AD%^jJxM0VaFyL>ML zEvl)JX!7+}b)7`h0;*N|ZA%Jhew!BmSQmZYko>v_NXh?Gqx>(W?C)oyzpfu&j&Cbo zuby?UowjV8G;AEV?1;OL&~s%f*m^(zYY4F&gsLL8;yC+MUZ z26@(vwBSxzU{My?lodDX5|^^#Nm=uv0<5cC%Blxt*_FKJMp||!uCeipbj%_ZGf%_K zQL(EOD6wI8*?5sRS&>N52-vDdH`QZb#d55CO@?6Apu3<|hI zn+)nYi?&81uTUs!OzMUkeVs^Z4P&l+s9R>Z&yfgA6v`qD5TH?4=(G(MZIjK~^o z#C?0RzJ1w~JxTYzwEIBXyD#b75jO9fHEkbPuJ0FZ?iX$BmuzfSZ0%HUtkx_{R=n-G zQ_TyBc5uuvxz%WH-{s))0*fD^6Q|v&OJ2-XZ`Qi6>#_%Z-j%lO&RFJB*WBqVUi4LO z3P8LB1s5)PgF{^95SAFYMLKqlhFzdxSLoOsHty7oAoV3FBB`2Orlx@<@AH!`R7hm+ zl;@vS8^xC&{8#*dCFuB-;4(|bE|Q6hRPr)|vPz?F(W%=^`YxNf#$mL&GK%B5Z>K6Y zpO&qG{be$@==5#yl-z0CZj60*)}9x8$Bnh)#ys$3o_ev)+?nz~wkDRN&2v?a7K{6< zq~{wF>BQ#Az~u4U4b{-$kHywvQe7isaw2qjj<>h$t<)swV@wc6z26H8S#LK%ArRp4sx4HyQm}J$e`zUob~$Td^X~Fq`O0y_im-D@(z_~sz9#M4 zl0Ds5zBCzo?a7c+KZ$=E5&t%Hr0V}V-0-d_@u{z8w=?mDv&$z2;j0IA&5N}g zz&;3O@A$Jeyy+WWj5Rnx%yoapiZ^r3gR<<IP`E7=(Ey9?lX2zr-YLy5o=hNTM)` zJesUdrK@Y$vVLFbM%8|6VozoK(r*3MWa{Zy^ku8>G!gR!<1~$TnImB4Xv7&3VIC$K z!pI#Gd6`YGVPK1syk9-OOMED2j76Ia>Hbq;-lNnc@7m*|u&4rAAyxyxnkb2&#` z_JIfM%+FO3=cdYZ(^UG%hj`MetRgrC;_Zx7e&(Z5}6kKp8~nINUnV#hu~D34k4;U zTPnHe5uf*oHJ#wE3UzOV=O2Zdry_N;NG%X4N`>;fr;-ezH2+kRBa~#E2y-^K(iWGq z7B@;(_G(v->sL>j*UlcTiMv;&J?qlGb!pF*;`zR+|4=hHUom@;Ge_uTL zv3mSt_2kFO$>rkF<;>9q!2R|3a^~dw)akdW=KbY%^>m_gfs{HzVfuMn;nbIQEL?Z zDwDjypun8NWeRzLNLr&%HbGIdX?w2pJuZODKHzf1k?ztsH$@6t-5#VEjgWntR{S{I z-s#@_wz&I!bK{qVb>$fF7Lf=98i7C{5uf3L{P+DwxJUiGM5kdV94 z{}~M5_&<;-KOcvm!5ZRz_|HWDi(h<~;dYPVb(dLN^5DV0A4fPteJ5Z5fynzE23kPc zXQT{)I9Nv@e)~TVi2pMP5(JU||G(`ABl&l#AC}w`#NR0{xmV`GVY<51Rq~6RzpJr^Z)x~W);5}>JsoS!ms}eTcP0Y literal 0 HcmV?d00001 diff --git a/src/SDL2/external/tiff-4.0.3/test/long_tag.c b/src/SDL2/external/tiff-4.0.3/test/long_tag.c new file mode 100644 index 000000000..e20b15bb4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/long_tag.c @@ -0,0 +1,156 @@ +/* $Id: long_tag.c,v 1.4 2008/03/28 01:42:06 bfriesen Exp $ */ + +/* + * Copyright (c) 2004, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Module to test LONG tags read/write functions. + */ + +#include "tif_config.h" + +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#include "tiffio.h" + +extern int CheckLongField(TIFF *, ttag_t, uint32); + +const char *filename = "long_test.tiff"; + +static struct Tags { + ttag_t tag; + short count; + uint32 value; +} long_tags[] = { + { TIFFTAG_SUBFILETYPE, 1, FILETYPE_REDUCEDIMAGE|FILETYPE_PAGE|FILETYPE_MASK } +}; +#define NTAGS (sizeof (long_tags) / sizeof (long_tags[0])) + +const uint32 width = 1; +const uint32 length = 1; +const uint32 rows_per_strip = 1; + +int +main(int argc, char **argv) +{ + TIFF *tif; + unsigned int i; + unsigned char buf[3] = { 0, 127, 255 }; + (void) argc; + (void) argv; + + /* Test whether we can write tags. */ + tif = TIFFOpen(filename, "w"); + if (!tif) { + fprintf (stderr, "Can't create test TIFF file %s.\n", filename); + return 1; + } + + if (!TIFFSetField(tif, TIFFTAG_IMAGEWIDTH, width)) { + fprintf (stderr, "Can't set ImageWidth tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_IMAGELENGTH, length)) { + fprintf (stderr, "Can't set ImageLength tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 8)) { + fprintf (stderr, "Can't set BitsPerSample tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, 3)) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_ROWSPERSTRIP, rows_per_strip)) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG)) { + fprintf (stderr, "Can't set PlanarConfiguration tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_RGB)) { + fprintf (stderr, "Can't set PhotometricInterpretation tag.\n"); + goto failure; + } + + for (i = 0; i < NTAGS; i++) { + if (!TIFFSetField(tif, long_tags[i].tag, + long_tags[i].value)) { + fprintf(stderr, "Can't set tag %d.\n", + (int)long_tags[i].tag); + goto failure; + } + } + + /* Write dummy pixel data. */ + if (!TIFFWriteScanline(tif, buf, 0, 0) < 0) { + fprintf (stderr, "Can't write image data.\n"); + goto failure; + } + + TIFFClose(tif); + + /* Ok, now test whether we can read written values. */ + tif = TIFFOpen(filename, "r"); + if (!tif) { + fprintf (stderr, "Can't open test TIFF file %s.\n", filename); + return 1; + } + + if (CheckLongField(tif, TIFFTAG_IMAGEWIDTH, width) < 0) + goto failure; + + if (CheckLongField(tif, TIFFTAG_IMAGELENGTH, length) < 0) + goto failure; + + if (CheckLongField(tif, TIFFTAG_ROWSPERSTRIP, rows_per_strip) < 0) + goto failure; + + for (i = 0; i < NTAGS; i++) { + if (CheckLongField(tif, long_tags[i].tag, + long_tags[i].value) < 0) + goto failure; + } + + TIFFClose(tif); + + /* All tests passed; delete file and exit with success status. */ + unlink(filename); + return 0; + +failure: + /* Something goes wrong; close file and return unsuccessful status. */ + TIFFClose(tif); + unlink(filename); + return 1; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ diff --git a/src/SDL2/external/tiff-4.0.3/test/ppm2tiff_pbm.sh b/src/SDL2/external/tiff-4.0.3/test/ppm2tiff_pbm.sh new file mode 100755 index 000000000..68d9e4590 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/ppm2tiff_pbm.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$IMG_MINISWHITE_1C_1B_PBM" +outfile="o-ppm2tiff_pbm.tiff" +f_test_convert "$PPM2TIFF" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/ppm2tiff_pgm.sh b/src/SDL2/external/tiff-4.0.3/test/ppm2tiff_pgm.sh new file mode 100755 index 000000000..001ec7064 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/ppm2tiff_pgm.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$IMG_MINISBLACK_1C_8B_PGM" +outfile="o-ppm2tiff_pgm.tiff" +f_test_convert "$PPM2TIFF" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/ppm2tiff_ppm.sh b/src/SDL2/external/tiff-4.0.3/test/ppm2tiff_ppm.sh new file mode 100755 index 000000000..8a81527bc --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/ppm2tiff_ppm.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$IMG_RGB_3C_8B_PPM" +outfile="o-ppm2tiff_ppm.tiff" +f_test_convert "$PPM2TIFF" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/raw_decode.c b/src/SDL2/external/tiff-4.0.3/test/raw_decode.c new file mode 100644 index 000000000..ec5c19044 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/raw_decode.c @@ -0,0 +1,254 @@ +/* $Id: raw_decode.c,v 1.4 2012-07-06 17:05:16 bfriesen Exp $ */ + +/* + * Copyright (c) 2012, Frank Warmerdam + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * The objective of this test suite is to test the JPEGRawDecode() + * interface via TIFReadEncodedTile(). This function with YCbCr subsampling + * is a frequent source of bugs. + */ + +#include "tif_config.h" + +#include +#include +#include +#ifdef HAVE_UNISTD_H +# include +#endif + +#include "tiffio.h" + +#include "jpeglib.h" /* Needed for JPEG_LIB_VERSION */ + +static unsigned char cluster_0[] = { 0, 0, 2, 0, 138, 139 }; +static unsigned char cluster_64[] = { 0, 0, 9, 6, 134, 119 }; +static unsigned char cluster_128[] = { 44, 40, 63, 59, 230, 95 }; + +static int check_cluster( int cluster, unsigned char *buffer, unsigned char *expected_cluster ) { + unsigned char *target = buffer + cluster*6; + + if (memcmp(target, expected_cluster, 6) == 0) { + return 0; + } + + fprintf( stderr, "Cluster %d did not match expected results.\n", cluster ); + fprintf( stderr, + "Expect: %3d %3d %3d %3d\n" + " %3d %3d\n", + expected_cluster[0], expected_cluster[1], + expected_cluster[4], expected_cluster[5], + expected_cluster[2], expected_cluster[3] ); + fprintf( stderr, + " Got: %3d %3d %3d %3d\n" + " %3d %3d\n", + target[0], target[1], + target[4], target[5], + target[2], target[3] ); + return 1; +} + +static int check_rgb_pixel( int pixel, int red, int green, int blue, unsigned char *buffer ) { + unsigned char *rgb = buffer + 3 * pixel; + + if( rgb[0] == red && rgb[1] == green && rgb[2] == blue ) { + return 0; + } + + fprintf( stderr, "Pixel %d did not match expected results.\n", pixel ); + fprintf( stderr, "Expect: %3d %3d %3d\n", red, green, blue ); + fprintf( stderr, " Got: %3d %3d %3d\n", rgb[0], rgb[1], rgb[2] ); + return 1; +} + +static int check_rgba_pixel( int pixel, int red, int green, int blue, int alpha, uint32 *buffer ) { + /* RGBA images are upside down - adjust for normal ordering */ + int adjusted_pixel = pixel % 128 + (127 - (pixel/128)) * 128; + uint32 rgba = buffer[adjusted_pixel]; + + if( TIFFGetR(rgba) == (uint32) red && TIFFGetG(rgba) == (uint32) green && + TIFFGetB(rgba) == (uint32) blue && TIFFGetA(rgba) == (uint32) alpha ) { + return 0; + } + + fprintf( stderr, "Pixel %d did not match expected results.\n", pixel ); + fprintf( stderr, "Expect: %3d %3d %3d %3d\n", red, green, blue, alpha ); + fprintf( stderr, " Got: %3d %3d %3d %3d\n", + TIFFGetR(rgba), TIFFGetG(rgba), TIFFGetB(rgba), TIFFGetA(rgba) ); + return 1; +} + +int +main(int argc, char **argv) +{ + TIFF *tif; + static const char *srcfilerel = "images/quad-tile.jpg.tiff"; + char *srcdir = NULL; + char srcfile[1024]; + unsigned short h, v; + int status; + unsigned char *buffer; + uint32 *rgba_buffer; + tsize_t sz, szout; + unsigned int pixel_status = 0; + + (void) argc; + (void) argv; + + if ((srcdir = getenv("srcdir")) == NULL) { + srcdir = "."; + } + if ((strlen(srcdir) + 1 + strlen(srcfilerel)) >= sizeof(srcfile)) { + fprintf( stderr, "srcdir too long %s\n", srcdir); + exit( 1 ); + } + strcpy(srcfile,srcdir); + strcat(srcfile,"/"); + strcat(srcfile,srcfilerel); + + tif = TIFFOpen(srcfile,"r"); + if ( tif == NULL ) { + fprintf( stderr, "Could not open %s\n", srcfile); + exit( 1 ); + } + + status = TIFFGetField(tif,TIFFTAG_YCBCRSUBSAMPLING, &h, &v); + if ( status == 0 || h != 2 || v != 2) { + fprintf( stderr, "Could not retrieve subsampling tag.\n" ); + exit(1); + } + + /* + * What is the appropriate size of a YCbCr encoded tile? + */ + sz = TIFFTileSize(tif); + if( sz != 24576) { + fprintf(stderr, "tiles are %d bytes\n", (int)sz); + exit(1); + } + + buffer = (unsigned char *) malloc(sz); + + /* + * Read a tile in decompressed form, but still YCbCr subsampled. + */ + szout = TIFFReadEncodedTile(tif,9,buffer,sz); + if (szout != sz) { + fprintf( stderr, + "Did not get expected result code from TIFFReadEncodedTile()(%d instead of %d)\n", + (int) szout, (int) sz ); + return 1; + } + + if( check_cluster( 0, buffer, cluster_0 ) + || check_cluster( 64, buffer, cluster_64 ) + || check_cluster( 128, buffer, cluster_128 ) ) { + exit(1); + } + free(buffer); + + /* + * Read a tile using the built-in conversion to RGB format provided by the JPEG library. + */ + TIFFSetField(tif, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RGB); + + sz = TIFFTileSize(tif); + if( sz != 128*128*3) { + fprintf(stderr, "tiles are %d bytes\n", (int)sz); + exit(1); + } + + buffer = (unsigned char *) malloc(sz); + + szout = TIFFReadEncodedTile(tif,9,buffer,sz); + if (szout != sz) { + fprintf( stderr, + "Did not get expected result code from TIFFReadEncodedTile()(%d instead of %d)\n", + (int) szout, (int) sz ); + return 1; + } + +#if JPEG_LIB_VERSION >= 70 + pixel_status |= check_rgb_pixel( 0, 18, 0, 41, buffer ); + pixel_status |= check_rgb_pixel( 64, 0, 0, 0, buffer ); + pixel_status |= check_rgb_pixel( 512, 5, 34, 196, buffer ); +#else + pixel_status |= check_rgb_pixel( 0, 15, 0, 18, buffer ); + pixel_status |= check_rgb_pixel( 64, 0, 0, 2, buffer ); + pixel_status |= check_rgb_pixel( 512, 6, 36, 182, buffer ); +#endif + + free( buffer ); + + TIFFClose(tif); + + /* + * Reopen and test reading using the RGBA interface. + */ + tif = TIFFOpen(srcfile,"r"); + + sz = 128 * 128 * sizeof(uint32); + rgba_buffer = (uint32 *) malloc(sz); + + if (!TIFFReadRGBATile( tif, 1*128, 2*128, rgba_buffer )) { + fprintf( stderr, "TIFFReadRGBATile() returned failure code.\n" ); + return 1; + } + + /* + * Currently TIFFReadRGBATile() just uses JPEGCOLORMODE_RGB so this + * trivally matches the last results. Eventually we should actually + * accomplish it from the YCbCr subsampled buffer ourselves in which + * case the results may be subtly different but similar. + */ +#if JPEG_LIB_VERSION >= 70 + pixel_status |= check_rgba_pixel( 0, 18, 0, 41, 255, rgba_buffer ); + pixel_status |= check_rgba_pixel( 64, 0, 0, 0, 255, rgba_buffer ); + pixel_status |= check_rgba_pixel( 512, 5, 34, 196, 255, rgba_buffer ); +#else + pixel_status |= check_rgba_pixel( 0, 15, 0, 18, 255, rgba_buffer ); + pixel_status |= check_rgba_pixel( 64, 0, 0, 2, 255, rgba_buffer ); + pixel_status |= check_rgba_pixel( 512, 6, 36, 182, 255, rgba_buffer ); +#endif + + free( rgba_buffer ); + TIFFClose(tif); + + if (pixel_status) { + exit(1); + } + + exit( 0 ); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/test/rewrite_tag.c b/src/SDL2/external/tiff-4.0.3/test/rewrite_tag.c new file mode 100644 index 000000000..1023f1668 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/rewrite_tag.c @@ -0,0 +1,346 @@ +/* $Id: rewrite_tag.c,v 1.5 2012-06-13 04:38:55 fwarmerdam Exp $ */ + +/* + * Copyright (c) 2007, Frank Warmerdam + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Module to test _TIFFRewriteField(). + */ + +#include "tif_config.h" + +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#include "tiffio.h" +#include "tiffiop.h" + +const uint32 width = 10; +const uint32 length = 40; +const uint32 rows_per_strip = 1; + +int test_packbits() + +{ + TIFF *tif; + int i; + unsigned char buf[10] = {0,0,0,0,0,0,0,0,0,0}; + + int length = 20; + const char *filename = "test_packbits.tif"; + + /* Test whether we can write tags. */ + tif = TIFFOpen(filename, "w"); + + if (!tif) { + fprintf (stderr, "Can't create test TIFF file %s.\n", filename); + return 1; + } + + if (!TIFFSetField(tif, TIFFTAG_COMPRESSION, COMPRESSION_PACKBITS)) { + fprintf (stderr, "Can't set Compression tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_IMAGEWIDTH, width)) { + fprintf (stderr, "Can't set ImageWidth tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_IMAGELENGTH, length)) { + fprintf (stderr, "Can't set ImageLength tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 8)) { + fprintf (stderr, "Can't set BitsPerSample tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, 1)) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_ROWSPERSTRIP, rows_per_strip)) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG)) { + fprintf (stderr, "Can't set PlanarConfiguration tag.\n"); + goto failure; + } + + for (i = 0; i < length; i++ ) + { + if( !TIFFWriteEncodedStrip( tif, i, buf, 10 ) ) + { + fprintf (stderr, "Can't write image data.\n"); + goto failure; + } + } + + TIFFClose(tif); + + /* Test whether we can write tags. */ + + tif = TIFFOpen(filename, "r+"); + + if (!tif) { + fprintf (stderr, "Can't create test TIFF file %s.\n", filename); + return 1; + } + + buf[3] = 17; + buf[6] = 12; + + if( !TIFFWriteEncodedStrip( tif, 6, buf, 10 ) ) + { + fprintf (stderr, "Can't write image data.\n"); + goto failure; + } + + TIFFClose(tif); + + unlink(filename); + + return 0; + + failure: + /* Something goes wrong; close file and return unsuccessful status. */ + TIFFClose(tif); + /* unlink(filename); */ + + return 1; + +} + +/************************************************************************/ +/* rewrite_test() */ +/************************************************************************/ +int rewrite_test( const char *filename, int length, int bigtiff, + uint64 base_value ) + +{ + TIFF *tif; + int i; + unsigned char buf[10] = {5,6,7,8,9,10,11,12,13,14}; + uint64 *rowoffset, *rowbytes; + uint64 *upd_rowoffset; + uint64 *upd_bytecount; + + /* Test whether we can write tags. */ + if( bigtiff ) + tif = TIFFOpen(filename, "w8"); + else + tif = TIFFOpen(filename, "w4"); + + if (!tif) { + fprintf (stderr, "Can't create test TIFF file %s.\n", filename); + return 1; + } + + if (!TIFFSetField(tif, TIFFTAG_COMPRESSION, COMPRESSION_PACKBITS)) { + fprintf (stderr, "Can't set Compression tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_IMAGEWIDTH, width)) { + fprintf (stderr, "Can't set ImageWidth tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_IMAGELENGTH, length)) { + fprintf (stderr, "Can't set ImageLength tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 8)) { + fprintf (stderr, "Can't set BitsPerSample tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, 1)) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_ROWSPERSTRIP, rows_per_strip)) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG)) { + fprintf (stderr, "Can't set PlanarConfiguration tag.\n"); + goto failure; + } + + for (i = 0; i < length; i++ ) + { + if( !TIFFWriteScanline( tif, buf, i, 0 ) ) + { + fprintf (stderr, "Can't write image data.\n"); + goto failure; + } + } + + TIFFClose(tif); + + /* Ok, now test whether we can read written values. */ + tif = TIFFOpen(filename, "r+"); + if (!tif) { + fprintf (stderr, "Can't open test TIFF file %s.\n", filename); + return 1; + } + + if( !TIFFGetField( tif, TIFFTAG_STRIPOFFSETS, &rowoffset ) ) + { + fprintf (stderr, "Can't fetch STRIPOFFSETS.\n"); + goto failure; + } + + if( !TIFFGetField( tif, TIFFTAG_STRIPBYTECOUNTS, &rowbytes ) ) + { + fprintf (stderr, "Can't fetch STRIPBYTECOUNTS.\n"); + goto failure; + } + + upd_rowoffset = (uint64 *) _TIFFmalloc(sizeof(uint64) * length); + for( i = 0; i < length; i++ ) + upd_rowoffset[i] = base_value + i*10; + + if( !_TIFFRewriteField( tif, TIFFTAG_STRIPOFFSETS, TIFF_LONG8, + length, upd_rowoffset ) ) + { + fprintf (stderr, "Can't rewrite STRIPOFFSETS.\n"); + goto failure; + } + + _TIFFfree( upd_rowoffset ); + + upd_bytecount = (uint64 *) _TIFFmalloc(sizeof(uint64) * length); + for( i = 0; i < length; i++ ) + upd_bytecount[i] = 100 + i*10; + + if( !_TIFFRewriteField( tif, TIFFTAG_STRIPBYTECOUNTS, TIFF_LONG8, + length, upd_bytecount ) ) + { + fprintf (stderr, "Can't rewrite STRIPBYTECOUNTS.\n"); + goto failure; + } + + _TIFFfree( upd_bytecount ); + + TIFFClose(tif); + + /* Reopen file and read back to verify contents */ + + tif = TIFFOpen(filename, "r"); + if (!tif) { + fprintf (stderr, "Can't open test TIFF file %s.\n", filename); + return 1; + } + + if( !TIFFGetField( tif, TIFFTAG_STRIPOFFSETS, &rowoffset ) ) + { + fprintf (stderr, "Can't fetch STRIPOFFSETS.\n"); + goto failure; + } + + for( i = 0; i < length; i++ ) + { + uint64 expect = base_value + i*10; + + if( rowoffset[i] != expect ) + { + fprintf( stderr, + "%s:STRIPOFFSETS[%d]: Got %X:%08X instead of %X:%08X.\n", + filename, i, + (int) (rowoffset[i] >> 32), + (int) (rowoffset[i]&0xFFFFFFFF), + (int) (expect >> 32), + (int) (expect & 0xFFFFFFFF) ); + goto failure; + } + } + + if( !TIFFGetField( tif, TIFFTAG_STRIPBYTECOUNTS, &rowbytes ) ) + { + fprintf (stderr, "Can't fetch STRIPBYTECOUNTS.\n"); + goto failure; + } + + for( i = 0; i < length; i++ ) + { + uint64 expect = 100 + i*10; + + if( rowbytes[i] != expect ) + { + fprintf( stderr, + "%s:STRIPBYTECOUNTS[%d]: Got %X:%08X instead of %X:%08X.\n", + filename, i, + (int) (rowbytes[i] >> 32), + (int) (rowbytes[i] & 0xFFFFFFFF), + (int) (expect >> 32), + (int) (expect & 0xFFFFFFFF) ); + goto failure; + } + } + + TIFFClose( tif ); + + /* All tests passed; delete file and exit with success status. */ + unlink(filename); + return 0; + + failure: + /* Something goes wrong; close file and return unsuccessful status. */ + TIFFClose(tif); + /* unlink(filename); */ + + return 1; + +} + +/************************************************************************/ +/* main() */ +/************************************************************************/ +int +main(int argc, char **argv) +{ + (void) argc; + (void) argv; + int failure = 0; + + failure |= test_packbits(); + + /* test fairly normal use */ + failure |= rewrite_test( "rewrite1.tif", 10, 0, 100 ); + failure |= rewrite_test( "rewrite2.tif", 10, 1, 100 ); + + /* test case of fitting all in directory entry */ + failure |= rewrite_test( "rewrite3.tif", 1, 0, 100 ); + failure |= rewrite_test( "rewrite4.tif", 1, 1, 100 ); + + /* test with very large values that don't fit in 4bytes (bigtiff only) */ + failure |= rewrite_test( "rewrite5.tif", 1000, 1, 0x6000000000ULL ); + failure |= rewrite_test( "rewrite6.tif", 1, 1, 0x6000000000ULL ); + + return failure; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ diff --git a/src/SDL2/external/tiff-4.0.3/test/short_tag.c b/src/SDL2/external/tiff-4.0.3/test/short_tag.c new file mode 100644 index 000000000..7d5a07cca --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/short_tag.c @@ -0,0 +1,205 @@ +/* $Id: short_tag.c,v 1.8 2008/04/15 14:20:30 dron Exp $ */ + +/* + * Copyright (c) 2004, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Module to test SHORT tags read/write functions. + */ + +#include "tif_config.h" + +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#include "tiffio.h" +#include "tifftest.h" + +static const char filename[] = "short_test.tiff"; + +#define SPP 3 /* Samples per pixel */ +const uint16 width = 1; +const uint16 length = 1; +const uint16 bps = 8; +const uint16 photometric = PHOTOMETRIC_RGB; +const uint16 rows_per_strip = 1; +const uint16 planarconfig = PLANARCONFIG_CONTIG; + +static const struct { + const ttag_t tag; + const uint16 value; +} short_single_tags[] = { + { TIFFTAG_COMPRESSION, COMPRESSION_NONE }, + { TIFFTAG_FILLORDER, FILLORDER_MSB2LSB }, + { TIFFTAG_ORIENTATION, ORIENTATION_BOTRIGHT }, + { TIFFTAG_RESOLUTIONUNIT, RESUNIT_INCH }, + { TIFFTAG_MINSAMPLEVALUE, 23 }, + { TIFFTAG_MAXSAMPLEVALUE, 241 }, + { TIFFTAG_INKSET, INKSET_MULTIINK }, + { TIFFTAG_NUMBEROFINKS, SPP }, + { TIFFTAG_SAMPLEFORMAT, SAMPLEFORMAT_UINT } +}; +#define NSINGLETAGS (sizeof(short_single_tags) / sizeof(short_single_tags[0])) + +static const struct { + const ttag_t tag; + const uint16 values[2]; +} short_paired_tags[] = { + { TIFFTAG_PAGENUMBER, {1, 1} }, + { TIFFTAG_HALFTONEHINTS, {0, 255} }, + { TIFFTAG_DOTRANGE, {8, 16} }, + { TIFFTAG_YCBCRSUBSAMPLING, {2, 1} } +}; +#define NPAIREDTAGS (sizeof(short_paired_tags) / sizeof(short_paired_tags[0])) + +int +main() +{ + TIFF *tif; + size_t i; + unsigned char buf[SPP] = { 0, 127, 255 }; + + /* Test whether we can write tags. */ + tif = TIFFOpen(filename, "w"); + if (!tif) { + fprintf (stderr, "Can't create test TIFF file %s.\n", filename); + return 1; + } + + if (!TIFFSetField(tif, TIFFTAG_IMAGEWIDTH, width)) { + fprintf (stderr, "Can't set ImageWidth tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_IMAGELENGTH, length)) { + fprintf (stderr, "Can't set ImageLength tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, bps)) { + fprintf (stderr, "Can't set BitsPerSample tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, SPP)) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_ROWSPERSTRIP, rows_per_strip)) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PLANARCONFIG, planarconfig)) { + fprintf (stderr, "Can't set PlanarConfiguration tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, photometric)) { + fprintf (stderr, "Can't set PhotometricInterpretation tag.\n"); + goto failure; + } + + for (i = 0; i < NSINGLETAGS; i++) { + if (!TIFFSetField(tif, short_single_tags[i].tag, + short_single_tags[i].value)) { + fprintf(stderr, "Can't set tag %lu.\n", + (unsigned long)short_single_tags[i].tag); + goto failure; + } + } + + for (i = 0; i < NPAIREDTAGS; i++) { + if (!TIFFSetField(tif, short_paired_tags[i].tag, + short_paired_tags[i].values[0], + short_paired_tags[i].values[1])) { + fprintf(stderr, "Can't set tag %lu.\n", + (unsigned long)short_paired_tags[i].tag); + goto failure; + } + } + + /* Write dummy pixel data. */ + if (!TIFFWriteScanline(tif, buf, 0, 0) < 0) { + fprintf (stderr, "Can't write image data.\n"); + goto failure; + } + + TIFFClose(tif); + + /* Ok, now test whether we can read written values. */ + tif = TIFFOpen(filename, "r"); + if (!tif) { + fprintf (stderr, "Can't open test TIFF file %s.\n", filename); + return 1; + } + + if (CheckLongField(tif, TIFFTAG_IMAGEWIDTH, width) < 0) + goto failure; + + if (CheckLongField(tif, TIFFTAG_IMAGELENGTH, length) < 0) + goto failure; + + if (CheckShortField(tif, TIFFTAG_BITSPERSAMPLE, bps) < 0) + goto failure; + + if (CheckShortField(tif, TIFFTAG_PHOTOMETRIC, photometric) < 0) + goto failure; + + if (CheckShortField(tif, TIFFTAG_SAMPLESPERPIXEL, SPP) < 0) + goto failure; + + if (CheckLongField(tif, TIFFTAG_ROWSPERSTRIP, rows_per_strip) < 0) + goto failure; + + if (CheckShortField(tif, TIFFTAG_PLANARCONFIG, planarconfig) < 0) + goto failure; + + for (i = 0; i < NSINGLETAGS; i++) { + if (CheckShortField(tif, short_single_tags[i].tag, + short_single_tags[i].value) < 0) + goto failure; + } + + for (i = 0; i < NPAIREDTAGS; i++) { + if (CheckShortPairedField(tif, short_paired_tags[i].tag, + short_paired_tags[i].values) < 0) + goto failure; + } + + TIFFClose(tif); + + /* All tests passed; delete file and exit with success status. */ + unlink(filename); + return 0; + +failure: + /* + * Something goes wrong; close file and return unsuccessful status. + * Do not remove the file for further manual investigation. + */ + TIFFClose(tif); + return 1; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ diff --git a/src/SDL2/external/tiff-4.0.3/test/strip.c b/src/SDL2/external/tiff-4.0.3/test/strip.c new file mode 100644 index 000000000..447cb49f8 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/strip.c @@ -0,0 +1,290 @@ +/* $Id: strip.c,v 1.4 2008/03/28 01:42:06 bfriesen Exp $ */ + +/* + * Copyright (c) 2004, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Functions to test strip interface of libtiff. + */ + +#include +#include + +#include "tiffio.h" + +int +write_strips(TIFF *tif, const tdata_t array, const tsize_t size) +{ + tstrip_t strip, nstrips; + tsize_t stripsize, offset; + + stripsize = TIFFStripSize(tif); + if (!stripsize) { + fprintf (stderr, "Wrong size of strip.\n"); + return -1; + } + + nstrips = TIFFNumberOfStrips(tif); + for (offset = 0, strip = 0; + offset < size && strip < nstrips; + offset+=stripsize, strip++) { + /* + * Properly write last strip. + */ + tsize_t bufsize = size - offset; + if (bufsize > stripsize) + bufsize = stripsize; + + if (TIFFWriteEncodedStrip(tif, strip, (char *)array + offset, + bufsize) != bufsize) { + fprintf (stderr, "Can't write strip %lu.\n", + (unsigned long)strip); + return -1; + } + } + + return 0; +} + +int +read_strips(TIFF *tif, const tdata_t array, const tsize_t size) +{ + tstrip_t strip, nstrips; + tsize_t stripsize, offset; + tdata_t buf = NULL; + + stripsize = TIFFStripSize(tif); + if (!stripsize) { + fprintf (stderr, "Wrong size of strip.\n"); + return -1; + } + + buf = _TIFFmalloc(stripsize); + if (!buf) { + fprintf (stderr, "Can't allocate space for strip buffer.\n"); + return -1; + } + + nstrips = TIFFNumberOfStrips(tif); + for (offset = 0, strip = 0; + offset < size && strip < nstrips; + offset+=stripsize, strip++) { + /* + * Properly read last strip. + */ + tsize_t bufsize = size - offset; + if (bufsize > stripsize) + bufsize = stripsize; + + if (TIFFReadEncodedStrip(tif, strip, buf, -1) != bufsize) { + fprintf (stderr, "Can't read strip %lu.\n", + (unsigned long)strip); + return -1; + } + if (memcmp(buf, (char *)array + offset, bufsize) != 0) { + fprintf (stderr, "Wrong data read for strip %lu.\n", + (unsigned long)strip); + _TIFFfree(buf); + return -1; + } + } + + _TIFFfree(buf); + + return 0; +} + +int +create_image_striped(const char *name, uint32 width, uint32 length, + uint32 rowsperstrip, uint16 compression, + uint16 spp, uint16 bps, uint16 photometric, + uint16 sampleformat, uint16 planarconfig, + const tdata_t array, const tsize_t size) +{ + TIFF *tif; + + /* Test whether we can write tags. */ + tif = TIFFOpen(name, "w"); + if (!tif) + goto openfailure; + + if (!TIFFSetField(tif, TIFFTAG_IMAGEWIDTH, width)) { + fprintf (stderr, "Can't set ImageWidth tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_IMAGELENGTH, length)) { + fprintf (stderr, "Can't set ImageLength tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, bps)) { + fprintf (stderr, "Can't set BitsPerSample tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, spp)) { + fprintf (stderr, "Can't set SamplesPerPixel tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_ROWSPERSTRIP, rowsperstrip)) { + fprintf (stderr, "Can't set RowsPerStrip tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PLANARCONFIG, planarconfig)) { + fprintf (stderr, "Can't set PlanarConfiguration tag.\n"); + goto failure; + } + if (!TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, photometric)) { + fprintf (stderr, "Can't set PhotometricInterpretation tag.\n"); + goto failure; + } + + if (write_strips(tif, array, size) < 0) { + fprintf (stderr, "Can't write image data.\n"); + goto failure; + } + + TIFFClose(tif); + return 0; + +failure: + TIFFClose(tif); +openfailure: + fprintf (stderr, "Can't create test TIFF file %s:\n" +" ImageWidth=%ld, ImageLength=%ld, RowsPerStrip=%ld, Compression=%d,\n" +" BitsPerSample=%d, SamplesPerPixel=%d, SampleFormat=%d,\n" +" PlanarConfiguration=%d, PhotometricInterpretation=%d.\n", + name, (long) width, (long) length, (long) rowsperstrip, + compression, bps, spp, sampleformat, planarconfig, + photometric); + return -1; +} + +int +read_image_striped(const char *name, uint32 width, uint32 length, + uint32 rowsperstrip, uint16 compression, + uint16 spp, uint16 bps, uint16 photometric, + uint16 sampleformat, uint16 planarconfig, + const tdata_t array, const tsize_t size) +{ + TIFF *tif; + uint16 value_u16; + uint32 value_u32; + + /* Test whether we can read written values. */ + tif = TIFFOpen(name, "r"); + if (!tif) + goto openfailure; + + if (TIFFIsTiled(tif)) { + fprintf (stderr, "Can't read image %s, it is tiled.\n", + name); + goto failure; + } + if (!TIFFGetField(tif, TIFFTAG_IMAGEWIDTH, &value_u32) + || value_u32 != width) { + fprintf (stderr, "Can't get tag %d.\n", TIFFTAG_IMAGEWIDTH); + goto failure; + } + if (!TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &value_u32) + || value_u32 != length) { + fprintf (stderr, "Can't get tag %d.\n", TIFFTAG_IMAGELENGTH); + goto failure; + } + if (!TIFFGetField(tif, TIFFTAG_BITSPERSAMPLE, &value_u16) + || value_u16 != bps) { + fprintf (stderr, "Can't get tag %d.\n", TIFFTAG_BITSPERSAMPLE); + goto failure; + } + if (!TIFFGetField(tif, TIFFTAG_PHOTOMETRIC, &value_u16) + || value_u16 != photometric) { + fprintf (stderr, "Can't get tag %d.\n", TIFFTAG_PHOTOMETRIC); + goto failure; + } + if (!TIFFGetField(tif, TIFFTAG_SAMPLESPERPIXEL, &value_u16) + || value_u16 != spp) { + fprintf (stderr, "Can't get tag %d.\n", TIFFTAG_SAMPLESPERPIXEL); + goto failure; + } + if (!TIFFGetField(tif, TIFFTAG_ROWSPERSTRIP, &value_u32) + || value_u32 != rowsperstrip) { + fprintf (stderr, "Can't get tag %d.\n", TIFFTAG_ROWSPERSTRIP); + goto failure; + } + if (!TIFFGetField(tif, TIFFTAG_PLANARCONFIG, &value_u16) + || value_u16 != planarconfig) { + fprintf (stderr, "Can't get tag %d.\n", TIFFTAG_PLANARCONFIG); + goto failure; + } + + if (read_strips(tif, array, size) < 0) { + fprintf (stderr, "Can't read image data.\n"); + goto failure; + } + + TIFFClose(tif); + return 0; + +failure: + TIFFClose(tif); +openfailure: + fprintf (stderr, "Can't read test TIFF file %s:\n" +" ImageWidth=%ld, ImageLength=%ld, RowsPerStrip=%ld, Compression=%d,\n" +" BitsPerSample=%d, SamplesPerPixel=%d, SampleFormat=%d,\n" +" PlanarConfiguration=%d, PhotometricInterpretation=%d.\n", + name, (long) width, (long) length, (long) rowsperstrip, + compression, bps, spp, sampleformat, planarconfig, + photometric); + return -1; +} + +int +write_scanlines(TIFF *tif, const tdata_t array, const tsize_t size) +{ + uint32 length, row; + tsize_t scanlinesize, offset; + (void) size; + + if (!TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &length)) { + fprintf (stderr, "Can't get tag %d.\n", TIFFTAG_IMAGELENGTH); + return -1; + } + + scanlinesize = TIFFScanlineSize(tif); + if (!scanlinesize) { + fprintf (stderr, "Wrong size of scanline.\n"); + return -1; + } + + for (offset = 0, row = 0; row < length; offset+=scanlinesize, row++) { + if (TIFFWriteScanline(tif, (char *)array + offset, row, 0) < 0) { + fprintf (stderr, + "Can't write image data at row %lu.\n", (long) row); + return -1; + } + } + + return 0; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ diff --git a/src/SDL2/external/tiff-4.0.3/test/strip_rw.c b/src/SDL2/external/tiff-4.0.3/test/strip_rw.c new file mode 100644 index 000000000..5247c0b3f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/strip_rw.c @@ -0,0 +1,157 @@ +/* $Id: strip_rw.c,v 1.6 2008/03/28 01:42:07 bfriesen Exp $ */ + +/* + * Copyright (c) 2004, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Test libtiff input/output routines. + */ + +#include "tif_config.h" + +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#include "tiffio.h" +#include "test_arrays.h" + +extern int +create_image_striped(const char *, uint32, uint32, uint32, uint16, uint16, + uint16, uint16, uint16, uint16, const tdata_t, + const tsize_t); +extern int +read_image_striped(const char *, uint32, uint32, uint32, uint16, uint16, + uint16, uint16, uint16, uint16, const tdata_t, + const tsize_t); + +const char *filename = "strip_test.tiff"; + +int +main(int argc, char **argv) +{ + uint32 rowsperstrip; + uint16 compression; + uint16 spp, bps, photometric, sampleformat, planarconfig; + (void) argc; + (void) argv; + + /* + * Test two special cases: image consisting from single line and image + * consisting from single column. + */ + rowsperstrip = 1; + compression = COMPRESSION_NONE; + spp = 1; + bps = 8; + photometric = PHOTOMETRIC_MINISBLACK; + sampleformat = SAMPLEFORMAT_UINT; + planarconfig = PLANARCONFIG_CONTIG; + + if (create_image_striped(filename, XSIZE * YSIZE, 1, rowsperstrip, + compression, spp, bps, photometric, + sampleformat, planarconfig, + (const tdata_t) byte_array1, byte_array1_size) < 0) { + fprintf (stderr, "Can't create TIFF file %s.\n", filename); + goto failure; + } + if (read_image_striped(filename, XSIZE * YSIZE, 1, rowsperstrip, + compression, spp, bps, photometric, + sampleformat, planarconfig, + (const tdata_t) byte_array1, byte_array1_size) < 0) { + fprintf (stderr, "Can't read TIFF file %s.\n", filename); + goto failure; + } + unlink(filename); + + if (create_image_striped(filename, 1, XSIZE * YSIZE, rowsperstrip, + compression, spp, bps, photometric, + sampleformat, planarconfig, + (const tdata_t) byte_array1, byte_array1_size) < 0) { + fprintf (stderr, "Can't create TIFF file %s.\n", filename); + goto failure; + } + if (read_image_striped(filename, 1, XSIZE * YSIZE, rowsperstrip, + compression, spp, bps, photometric, + sampleformat, planarconfig, + (const tdata_t) byte_array1, byte_array1_size) < 0) { + fprintf (stderr, "Can't read TIFF file %s.\n", filename); + goto failure; + } + unlink(filename); + + /* + * Test one-channel image with different parameters. + */ + rowsperstrip = 1; + spp = 1; + bps = 8; + photometric = PHOTOMETRIC_MINISBLACK; + sampleformat = SAMPLEFORMAT_UINT; + planarconfig = PLANARCONFIG_CONTIG; + + if (create_image_striped(filename, XSIZE, YSIZE, rowsperstrip, + compression, spp, bps, photometric, + sampleformat, planarconfig, + (const tdata_t) byte_array1, byte_array1_size) < 0) { + fprintf (stderr, "Can't create TIFF file %s.\n", filename); + goto failure; + } + if (read_image_striped(filename, XSIZE, YSIZE, rowsperstrip, + compression, spp, bps, photometric, + sampleformat, planarconfig, + (const tdata_t) byte_array1, byte_array1_size) < 0) { + fprintf (stderr, "Can't read TIFF file %s.\n", filename); + goto failure; + } + unlink(filename); + + rowsperstrip = YSIZE; + if (create_image_striped(filename, XSIZE, YSIZE, rowsperstrip, + compression, spp, bps, photometric, + sampleformat, planarconfig, + (const tdata_t) byte_array1, byte_array1_size) < 0) { + fprintf (stderr, "Can't create TIFF file %s.\n", filename); + goto failure; + } + if (read_image_striped(filename, XSIZE, YSIZE, rowsperstrip, + compression, spp, bps, photometric, + sampleformat, planarconfig, + (const tdata_t) byte_array1, byte_array1_size) < 0) { + fprintf (stderr, "Can't read TIFF file %s.\n", filename); + goto failure; + } + unlink(filename); + + return 0; + +failure: + unlink(filename); + return 1; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ diff --git a/src/SDL2/external/tiff-4.0.3/test/test_arrays.c b/src/SDL2/external/tiff-4.0.3/test/test_arrays.c new file mode 100644 index 000000000..83767662b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/test_arrays.c @@ -0,0 +1,829 @@ +/* $Id: test_arrays.c,v 1.3 2006/03/23 14:54:02 dron Exp $ */ + +/* + * Copyright (c) 2004, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Numerical arrays used to test libtiff's read/write functions. + */ + +#include + +#include "test_arrays.h" + +const unsigned char byte_array1[XSIZE * YSIZE]= +{ +86, 84, 86, 90, 89, 85, 90, 78, 77, 79, 75, 77, 79, 86, +87, 83, 82, 87, 89, 88, 86, 87, 88, 87, 81, 84, 85, 85, +84, 86, 88, 91, 96, 95, 97, 95, 89, +85, 82, 81, 88, 89, 85, 89, 83, 74, 79, 76, 77, 80, 87, +87, 84, 84, 88, 90, 89, 87, 85, 87, 88, 83, 80, 82, 84, +85, 87, 90, 95, 96, 95, 95, 92, 90, +85, 81, 79, 84, 90, 87, 88, 88, 73, 79, 75, 76, 79, 88, +88, 87, 85, 90, 92, 89, 88, 88, 87, 86, 84, 82, 82, 83, +87, 89, 93, 94, 93, 93, 92, 92, 96, +85, 82, 76, 80, 88, 89, 88, 89, 73, 80, 75, 75, 77, 89, +92, 93, 91, 89, 94, 92, 90, 89, 88, 84, 84, 82, 82, 85, +88, 91, 94, 93, 93, 89, 90, 96, 96, +87, 83, 75, 77, 83, 89, 90, 90, 74, 78, 76, 76, 76, 84, +94, 100, 89, 92, 94, 92, 90, 89, 90, 85, 84, 83, 83, 87, +91, 92, 88, 92, 91, 88, 90, 97, 95, +89, 83, 74, 77, 82, 84, 90, 92, 78, 72, 76, 75, 75, 81, +95, 101, 95, 92, 95, 93, 90, 89, 90, 87, 86, 84, 86, 88, +90, 90, 87, 90, 89, 90, 89, 98, 98, +92, 84, 75, 76, 81, 81, 86, 91, 81, 72, 74, 74, 75, 81, +104, 108, 93, 92, 95, 94, 88, 87, 89, 87, 85, 85, 88, 89, +93, 91, 88, 88, 91, 88, 91, 106, 108, +93, 89, 78, 75, 77, 80, 85, 86, 85, 73, 72, 73, 74, 79, +102, 101, 88, 92, 93, 91, 87, 87, 86, 87, 85, 86, 88, 89, +94, 94, 90, 88, 85, 86, 98, 109, 113, +92, 93, 83, 76, 74, 79, 84, 85, 81, 75, 72, 73, 74, 79, +105, 86, 86, 92, 96, 98, 104, 86, 85, 85, 85, 88, 90, 90, +93, 92, 88, 87, 86, 89, 97, 110, 109, +92, 93, 89, 78, 79, 78, 89, 84, 75, 76, 73, 72, 73, 78, +105, 83, 82, 88, 83, 107, 95, 84, 85, 84, 86, 87, 90, 91, +92, 90, 88, 87, 89, 90, 91, 99, 107, +96, 94, 91, 82, 84, 86, 91, 87, 75, 74, 73, 73, 73, 77, +101, 86, 83, 89, 92, 99, 98, 86, 86, 87, 83, 84, 89, 89, +92, 92, 92, 96, 96, 87, 91, 90, 98, +96, 97, 94, 87, 88, 89, 92, 90, 79, 72, 73, 73, 74, 77, +100, 92, 84, 86, 98, 100, 92, 87, 88, 88, 84, 83, 87, 89, +91, 94, 94, 96, 93, 87, 87, 84, 109, +93, 92, 95, 92, 94, 93, 92, 91, 82, 72, 73, 74, 74, 76, +95, 89, 85, 84, 102, 89, 85, 88, 94, 86, 82, 83, 82, 91, +94, 97, 90, 92, 85, 90, 85, 79, 125, +89, 96, 94, 90, 94, 95, 91, 91, 85, 76, 72, 73, 74, 75, +88, 100, 83, 84, 84, 83, 85, 88, 90, 85, 84, 83, 84, 88, +92, 93, 90, 89, 84, 90, 94, 79, 139, +93, 97, 97, 93, 92, 95, 91, 90, 87, 81, 74, 73, 73, 74, +85, 97, 95, 95, 89, 86, 86, 92, 87, 85, 84, 90, 86, 85, +91, 87, 87, 86, 93, 124, 140, 106, 143, +101, 95, 97, 97, 96, 95, 84, 88, 87, 82, 78, 73, 73, 74, +82, 92, 104, 95, 88, 89, 87, 89, 86, 85, 86, 87, 87, 81, +81, 83, 91, 106, 131, 153, 151, 123, 133, +99, 101, 102, 99, 96, 90, 83, 82, 85, 84, 79, 76, 74, 74, +78, 81, 89, 96, 90, 93, 88, 88, 86, 88, 89, 95, 89, 82, +81, 85, 104, 118, 141, 160, 129, 137, 147, +103, 104, 98, 99, 90, 88, 81, 76, 81, 83, 79, 77, 75, 75, +75, 76, 80, 90, 94, 87, 86, 87, 92, 85, 85, 85, 87, 87, +89, 91, 112, 115, 145, 154, 145, 141, 147, +106, 103, 100, 99, 92, 82, 78, 75, 78, 81, 79, 77, 77, 78, +78, 76, 77, 81, 89, 87, 84, 84, 90, 86, 85, 84, 80, 85, +97, 104, 119, 119, 149, 147, 144, 146, 152, +107, 105, 103, 100, 93, 83, 78, 74, 74, 79, 78, 77, 76, 78, +80, 79, 76, 78, 83, 84, 81, 81, 84, 83, 82, 78, 78, 85, +86, 97, 105, 114, 145, 146, 148, 147, 150, +107, 105, 103, 97, 92, 84, 72, 72, 75, 77, 76, 75, 76, 79, +80, 80, 77, 76, 82, 81, 80, 81, 80, 80, 80, 77, 74, 74, +73, 77, 91, 110, 132, 141, 152, 152, 145, +107, 105, 103, 96, 92, 86, 73, 71, 73, 75, 75, 76, 76, 78, +80, 80, 80, 98, 80, 80, 82, 82, 80, 78, 76, 73, 71, 72, +71, 74, 80, 108, 119, 136, 158, 142, 137, +107, 104, 101, 97, 85, 87, 75, 70, 70, 74, 74, 75, 77, 78, +80, 82, 110, 117, 110, 78, 81, 83, 81, 78, 76, 73, 71, 69, +68, 71, 74, 95, 120, 138, 148, 143, 139 +}; + +const size_t byte_array1_size = sizeof(byte_array1); + +const unsigned char byte_array2[YSIZE * XSIZE] = +{ +77, 73, 76, 80, 79, 75, 82, 65, 62, 64, 59, 59, 61, 72, +70, 67, 65, 70, 71, 70, 68, 66, 65, 67, 66, 66, 66, 66, +66, 66, 66, 66, 66, 65, 63, 63, 62, +75, 71, 71, 79, 81, 75, 81, 73, 59, 65, 60, 60, 64, 73, +73, 68, 66, 70, 72, 71, 68, 66, 66, 67, 66, 66, 66, 67, +67, 67, 66, 67, 66, 64, 63, 63, 63, +76, 71, 66, 73, 81, 78, 80, 79, 59, 66, 60, 59, 62, 74, +74, 71, 67, 70, 73, 71, 68, 66, 65, 65, 66, 66, 67, 67, +67, 67, 67, 67, 66, 64, 64, 64, 64, +76, 72, 64, 68, 79, 81, 80, 80, 59, 68, 60, 59, 60, 75, +75, 73, 67, 68, 73, 72, 68, 66, 65, 63, 67, 67, 67, 67, +68, 67, 67, 66, 65, 64, 65, 65, 65, +79, 72, 63, 66, 73, 80, 83, 82, 60, 65, 61, 61, 60, 66, +75, 75, 65, 70, 73, 72, 68, 66, 65, 64, 68, 67, 68, 68, +68, 67, 67, 66, 65, 65, 65, 66, 65, +81, 73, 62, 65, 72, 74, 82, 85, 66, 59, 62, 60, 60, 63, +75, 76, 68, 69, 72, 72, 68, 66, 66, 65, 67, 68, 68, 68, +68, 68, 66, 66, 64, 66, 65, 66, 66, +84, 74, 64, 64, 70, 71, 78, 84, 70, 58, 60, 59, 59, 63, +75, 80, 73, 67, 72, 72, 68, 66, 66, 65, 66, 68, 68, 68, +68, 68, 66, 65, 65, 65, 66, 67, 68, +87, 81, 66, 63, 65, 68, 76, 76, 75, 59, 58, 59, 59, 60, +71, 92, 65, 64, 74, 72, 69, 67, 65, 65, 65, 68, 69, 68, +69, 67, 65, 65, 65, 65, 67, 68, 69, +86, 86, 73, 64, 62, 67, 75, 76, 70, 61, 58, 58, 59, 60, +81, 68, 59, 63, 74, 90, 99, 67, 65, 65, 64, 67, 68, 68, +68, 67, 65, 65, 66, 65, 66, 68, 68, +85, 85, 80, 66, 67, 67, 81, 74, 62, 63, 59, 58, 58, 60, +93, 61, 59, 59, 68, 115, 76, 67, 66, 64, 64, 66, 68, 68, +68, 66, 65, 65, 66, 65, 64, 65, 69, +90, 87, 83, 71, 74, 77, 83, 79, 63, 60, 59, 59, 58, 58, +90, 61, 59, 59, 67, 80, 71, 68, 66, 64, 63, 63, 68, 68, +68, 66, 65, 66, 67, 65, 64, 62, 87, +91, 92, 86, 76, 78, 81, 85, 82, 67, 59, 59, 59, 59, 60, +88, 72, 59, 60, 74, 80, 70, 67, 66, 64, 62, 60, 65, 68, +67, 66, 65, 67, 66, 64, 62, 59, 111, +84, 84, 87, 85, 87, 85, 84, 84, 72, 59, 59, 59, 59, 59, +73, 71, 62, 59, 100, 70, 70, 67, 66, 64, 60, 58, 58, 67, +68, 66, 65, 66, 64, 63, 59, 56, 131, +80, 90, 87, 83, 88, 89, 84, 83, 76, 64, 59, 59, 59, 58, +59, 97, 64, 62, 71, 68, 70, 73, 66, 63, 61, 58, 58, 62, +67, 66, 64, 65, 63, 63, 61, 57, 149, +86, 91, 92, 87, 85, 88, 83, 81, 78, 69, 61, 59, 59, 59, +59, 61, 83, 72, 67, 67, 69, 69, 66, 64, 61, 72, 56, 57, +64, 64, 64, 64, 65, 115, 150, 93, 151, +97, 89, 91, 92, 89, 88, 74, 80, 78, 71, 65, 59, 58, 59, +58, 59, 71, 72, 67, 70, 70, 69, 67, 64, 63, 66, 56, 54, +57, 59, 64, 87, 139, 162, 160, 128, 141, +94, 96, 97, 94, 89, 82, 71, 70, 76, 73, 67, 61, 59, 59, +58, 59, 61, 71, 67, 75, 70, 68, 70, 65, 63, 63, 59, 56, +54, 55, 90, 121, 149, 168, 138, 144, 157, +99, 100, 93, 93, 82, 80, 70, 62, 70, 72, 67, 63, 60, 60, +58, 58, 60, 68, 70, 70, 69, 68, 79, 68, 64, 62, 60, 59, +57, 57, 88, 120, 151, 162, 154, 149, 155, +103, 99, 95, 94, 84, 73, 67, 62, 65, 69, 67, 64, 63, 64, +63, 59, 60, 65, 71, 69, 69, 67, 78, 65, 63, 61, 59, 61, +60, 68, 100, 128, 155, 155, 152, 155, 164, +104, 102, 99, 95, 86, 74, 67, 61, 61, 66, 65, 63, 63, 64, +65, 63, 60, 63, 70, 69, 67, 67, 67, 65, 62, 60, 58, 57, +62, 58, 71, 117, 150, 154, 157, 155, 163, +104, 101, 99, 91, 84, 74, 59, 59, 62, 64, 63, 61, 62, 64, +64, 64, 61, 60, 69, 68, 67, 69, 67, 65, 62, 59, 58, 57, +57, 56, 59, 104, 137, 147, 159, 161, 158, +104, 101, 99, 90, 85, 77, 60, 57, 60, 62, 62, 62, 63, 64, +65, 65, 66, 100, 67, 67, 69, 69, 67, 65, 63, 60, 58, 56, +54, 55, 56, 77, 122, 142, 166, 157, 150, +104, 101, 97, 92, 77, 79, 64, 57, 57, 62, 62, 62, 64, 65, +66, 65, 115, 138, 129, 64, 68, 70, 68, 66, 64, 60, 58, 56, +53, 53, 56, 62, 115, 143, 157, 156, 159 +}; + +const size_t byte_array2_size = sizeof(byte_array2); + +const unsigned char byte_array3[YSIZE * XSIZE] = +{ +211, 221, 216, 201, 205, 216, 195, 236, 244, 237, 250, 250, 248, 218, +223, 232, 236, 224, 221, 221, 227, 231, 232, 227, 229, 227, 227, 225, +227, 225, 226, 226, 226, 228, 234, 234, 234, 216, 226, 228, 205, 200, +214, 198, 215, 250, 233, 247, 250, 242, 219, 220, 229, 235, 225, 217, +220, 227, 232, 230, 228, 229, 228, 227, 224, 225, 223, 226, 225, 226, +230, 233, 233, 234, 213, 227, 237, 220, 200, 204, 202, 201, 248, 231, +246, 250, 245, 214, 215, 223, 232, 225, 218, 218, 225, 230, 232, 231, +229, 227, 225, 224, 223, 226, 224, 225, 228, 229, 230, 232, 231, 215, +223, 242, 233, 206, 200, 201, 197, 250, 227, 250, 249, 248, 211, 212, +216, 233, 229, 216, 218, 225, 230, 232, 237, 226, 224, 224, 223, 225, +225, 224, 225, 228, 229, 231, 229, 231, 208, 220, 247, 238, 221, 202, +194, 194, 245, 237, 247, 247, 249, 234, 210, 212, 237, 222, 219, 217, +226, 229, 232, 235, 222, 222, 223, 223, 223, 224, 224, 227, 226, 229, +229, 228, 231, 200, 221, 247, 239, 224, 217, 196, 189, 229, 248, 245, +248, 250, 241, 210, 210, 230, 225, 218, 218, 224, 230, 230, 229, 224, +222, 222, 222, 222, 223, 225, 226, 231, 226, 228, 229, 230, 191, 216, +246, 245, 226, 228, 207, 191, 221, 251, 248, 249, 251, 245, 214, 214, +233, 229, 217, 217, 224, 229, 230, 229, 225, 220, 223, 221, 222, 224, +224, 227, 230, 227, 226, 229, 230, 187, 199, 238, 248, 242, 231, 213, +211, 209, 246, 248, 251, 251, 250, 226, 215, 236, 237, 217, 215, 222, +226, 229, 229, 227, 222, 222, 223, 222, 225, 227, 228, 226, 227, 228, +228, 230, 188, 189, 221, 243, 247, 237, 215, 209, 223, 241, 248, 248, +250, 248, 228, 234, 251, 239, 219, 210, 205, 224, 229, 228, 230, 221, +223, 223, 222, 226, 229, 228, 224, 227, 229, 230, 232, 190, 190, 201, +235, 236, 238, 198, 214, 243, 238, 248, 248, 250, 249, 215, 244, 250, +250, 240, 168, 220, 224, 228, 230, 231, 226, 221, 224, 223, 226, 230, +227, 226, 226, 230, 233, 234, 179, 185, 195, 224, 215, 210, 195, 204, +239, 245, 250, 250, 252, 254, 216, 243, 249, 249, 233, 210, 215, 223, +227, 230, 234, 234, 224, 223, 223, 227, 230, 226, 226, 228, 231, 235, +212, 178, 174, 190, 211, 207, 199, 189, 194, 230, 250, 250, 250, 253, +253, 222, 225, 250, 248, 218, 216, 217, 225, 226, 232, 239, 242, 229, +223, 224, 229, 230, 225, 228, 230, 236, 241, 183, 194, 194, 185, 190, +185, 190, 191, 191, 219, 250, 251, 250, 253, 254, 241, 225, 246, 249, +198, 217, 220, 224, 225, 234, 241, 242, 246, 224, 223, 227, 229, 227, +228, 234, 237, 245, 149, 203, 178, 182, 193, 185, 179, 191, 194, 211, +236, 252, 252, 254, 254, 253, 192, 240, 244, 235, 224, 220, 229, 224, +236, 239, 243, 244, 236, 224, 229, 230, 229, 231, 230, 233, 244, 128, +188, 177, 171, 184, 191, 182, 196, 197, 208, 224, 247, 253, 255, 252, +250, 248, 226, 216, 228, 230, 220, 220, 227, 234, 237, 231, 247, 244, +231, 231, 229, 228, 229, 182, 128, 196, 118, 160, 182, 174, 172, 179, +183, 216, 203, 206, 220, 236, 253, 254, 253, 253, 249, 225, 219, 232, +230, 220, 224, 227, 233, 237, 234, 244, 250, 245, 240, 224, 212, 174, +123, 124, 176, 127, 171, 163, 161, 167, 177, 198, 221, 228, 212, 215, +233, 245, 252, 255, 253, 252, 251, 223, 231, 216, 222, 227, 231, 231, +234, 227, 238, 245, 249, 244, 210, 177, 124, 129, 134, 124, 113, 156, +155, 172, 168, 197, 201, 224, 247, 224, 219, 233, 242, 249, 250, 252, +254, 252, 230, 230, 224, 224, 225, 225, 227, 232, 232, 235, 239, 239, +241, 213, 178, 131, 128, 128, 120, 114, 149, 157, 165, 168, 191, 218, +231, 246, 237, 226, 234, 241, 243, 239, 244, 252, 249, 237, 225, 226, +224, 227, 220, 229, 235, 235, 239, 238, 236, 230, 204, 177, 125, 131, +127, 117, 111, 146, 151, 158, 166, 187, 215, 230, 246, 246, 231, 238, +243, 246, 243, 241, 244, 253, 245, 226, 226, 229, 229, 229, 231, 236, +238, 241, 240, 241, 235, 224, 188, 134, 123, 127, 116, 116, 144, 151, +158, 173, 190, 214, 251, 250, 243, 236, 242, 249, 246, 241, 241, 244, +251, 251, 228, 230, 230, 226, 232, 231, 236, 241, 243, 244, 243, 243, +235, 200, 150, 128, 122, 119, 117, 144, 151, 156, 176, 190, 207, 246, +253, 244, 239, 244, 246, 244, 242, 240, 243, 249, 198, 239, 234, 226, +226, 228, 234, 238, 241, 244, 245, 247, 250, 244, 219, 182, 138, 118, +118, 116, 143, 150, 162, 173, 208, 205, 238, 253, 251, 241, 244, 244, +242, 243, 238, 246, 193, 146, 173, 246, 231, 223, 230, 232, 236, 240, +245, 247, 252, 252, 245, 233, 195, 138, 114, 118, 108 +}; + +const size_t byte_array3_size = sizeof(byte_array3); + +const float array_float1[YSIZE * XSIZE] = +{ +234.866, 229.404, 234.866, 245.790, 243.059, 232.135, 245.790, 213.018, +210.287, 215.749, 204.825, 210.287, 215.749, 234.866, 237.597, 226.673, +223.942, 237.597, 243.059, 240.328, 234.866, 237.597, 240.328, 237.597, +221.211, 229.404, 232.135, 232.135, 229.404, 234.866, 240.328, 248.521, +262.176, 259.445, 264.907, 259.445, 243.059, +232.135, 223.942, 221.211, 240.328, 243.059, 232.135, 243.059, 226.673, +202.094, 215.749, 207.556, 210.287, 218.480, 237.597, 237.597, 229.404, +229.404, 240.328, 245.790, 243.059, 237.597, 232.135, 237.597, 240.328, +226.673, 218.480, 223.942, 229.404, 232.135, 237.597, 245.790, 259.445, +262.176, 259.445, 259.445, 251.252, 245.790, +232.135, 221.211, 215.749, 229.404, 245.790, 237.597, 240.328, 240.328, +199.363, 215.749, 204.825, 207.556, 215.749, 240.328, 240.328, 237.597, +232.135, 245.790, 251.252, 243.059, 240.328, 240.328, 237.597, 234.866, +229.404, 223.942, 223.942, 226.673, 237.597, 243.059, 253.983, 256.714, +253.983, 253.983, 251.252, 251.252, 262.176, +232.135, 223.942, 207.556, 218.480, 240.328, 243.059, 240.328, 243.059, +199.363, 218.480, 204.825, 204.825, 210.287, 243.059, 251.252, 253.983, +248.521, 243.059, 256.714, 251.252, 245.790, 243.059, 240.328, 229.404, +229.404, 223.942, 223.942, 232.135, 240.328, 248.521, 256.714, 253.983, +253.983, 243.059, 245.790, 262.176, 262.176, +237.597, 226.673, 204.825, 210.287, 226.673, 243.059, 245.790, 245.790, +202.094, 213.018, 207.556, 207.556, 207.556, 229.404, 256.714, 273.100, +243.059, 251.252, 256.714, 251.252, 245.790, 243.059, 245.790, 232.135, +229.404, 226.673, 226.673, 237.597, 248.521, 251.252, 240.328, 251.252, +248.521, 240.328, 245.790, 264.907, 259.445, +243.059, 226.673, 202.094, 210.287, 223.942, 229.404, 245.790, 251.252, +213.018, 196.632, 207.556, 204.825, 204.825, 221.211, 259.445, 275.831, +259.445, 251.252, 259.445, 253.983, 245.790, 243.059, 245.790, 237.597, +234.866, 229.404, 234.866, 240.328, 245.790, 245.790, 237.597, 245.790, +243.059, 245.790, 243.059, 267.638, 267.638, +251.252, 229.404, 204.825, 207.556, 221.211, 221.211, 234.866, 248.521, +221.211, 196.632, 202.094, 202.094, 204.825, 221.211, 284.024, 294.948, +253.983, 251.252, 259.445, 256.714, 240.328, 237.597, 243.059, 237.597, +232.135, 232.135, 240.328, 243.059, 253.983, 248.521, 240.328, 240.328, +248.521, 240.328, 248.521, 289.486, 294.948, +253.983, 243.059, 213.018, 204.825, 210.287, 218.480, 232.135, 234.866, +232.135, 199.363, 196.632, 199.363, 202.094, 215.749, 278.562, 275.831, +240.328, 251.252, 253.983, 248.521, 237.597, 237.597, 234.866, 237.597, +232.135, 234.866, 240.328, 243.059, 256.714, 256.714, 245.790, 240.328, +232.135, 234.866, 267.638, 297.679, 308.603, +251.252, 253.983, 226.673, 207.556, 202.094, 215.749, 229.404, 232.135, +221.211, 204.825, 196.632, 199.363, 202.094, 215.749, 286.755, 234.866, +234.866, 251.252, 262.176, 267.638, 284.024, 234.866, 232.135, 232.135, +232.135, 240.328, 245.790, 245.790, 253.983, 251.252, 240.328, 237.597, +234.866, 243.059, 264.907, 300.410, 297.679, +251.252, 253.983, 243.059, 213.018, 215.749, 213.018, 243.059, 229.404, +204.825, 207.556, 199.363, 196.632, 199.363, 213.018, 286.755, 226.673, +223.942, 240.328, 226.673, 292.217, 259.445, 229.404, 232.135, 229.404, +234.866, 237.597, 245.790, 248.521, 251.252, 245.790, 240.328, 237.597, +243.059, 245.790, 248.521, 270.369, 292.217, +262.176, 256.714, 248.521, 223.942, 229.404, 234.866, 248.521, 237.597, +204.825, 202.094, 199.363, 199.363, 199.363, 210.287, 275.831, 234.866, +226.673, 243.059, 251.252, 270.369, 267.638, 234.866, 234.866, 237.597, +226.673, 229.404, 243.059, 243.059, 251.252, 251.252, 251.252, 262.176, +262.176, 237.597, 248.521, 245.790, 267.638, +262.176, 264.907, 256.714, 237.597, 240.328, 243.059, 251.252, 245.790, +215.749, 196.632, 199.363, 199.363, 202.094, 210.287, 273.100, 251.252, +229.404, 234.866, 267.638, 273.100, 251.252, 237.597, 240.328, 240.328, +229.404, 226.673, 237.597, 243.059, 248.521, 256.714, 256.714, 262.176, +253.983, 237.597, 237.597, 229.404, 297.679, +253.983, 251.252, 259.445, 251.252, 256.714, 253.983, 251.252, 248.521, +223.942, 196.632, 199.363, 202.094, 202.094, 207.556, 259.445, 243.059, +232.135, 229.404, 278.562, 243.059, 232.135, 240.328, 256.714, 234.866, +223.942, 226.673, 223.942, 248.521, 256.714, 264.907, 245.790, 251.252, +232.135, 245.790, 232.135, 215.749, 341.375, +243.059, 262.176, 256.714, 245.790, 256.714, 259.445, 248.521, 248.521, +232.135, 207.556, 196.632, 199.363, 202.094, 204.825, 240.328, 273.100, +226.673, 229.404, 229.404, 226.673, 232.135, 240.328, 245.790, 232.135, +229.404, 226.673, 229.404, 240.328, 251.252, 253.983, 245.790, 243.059, +229.404, 245.790, 256.714, 215.749, 379.609, +253.983, 264.907, 264.907, 253.983, 251.252, 259.445, 248.521, 245.790, +237.597, 221.211, 202.094, 199.363, 199.363, 202.094, 232.135, 264.907, +259.445, 259.445, 243.059, 234.866, 234.866, 251.252, 237.597, 232.135, +229.404, 245.790, 234.866, 232.135, 248.521, 237.597, 237.597, 234.866, +253.983, 338.644, 382.340, 289.486, 390.533, +275.831, 259.445, 264.907, 264.907, 262.176, 259.445, 229.404, 240.328, +237.597, 223.942, 213.018, 199.363, 199.363, 202.094, 223.942, 251.252, +284.024, 259.445, 240.328, 243.059, 237.597, 243.059, 234.866, 232.135, +234.866, 237.597, 237.597, 221.211, 221.211, 226.673, 248.521, 289.486, +357.761, 417.843, 412.381, 335.913, 363.223, +270.369, 275.831, 278.562, 270.369, 262.176, 245.790, 226.673, 223.942, +232.135, 229.404, 215.749, 207.556, 202.094, 202.094, 213.018, 221.211, +243.059, 262.176, 245.790, 253.983, 240.328, 240.328, 234.866, 240.328, +243.059, 259.445, 243.059, 223.942, 221.211, 232.135, 284.024, 322.258, +385.071, 436.960, 352.299, 374.147, 401.457, +281.293, 284.024, 267.638, 270.369, 245.790, 240.328, 221.211, 207.556, +221.211, 226.673, 215.749, 210.287, 204.825, 204.825, 204.825, 207.556, +218.480, 245.790, 256.714, 237.597, 234.866, 237.597, 251.252, 232.135, +232.135, 232.135, 237.597, 237.597, 243.059, 248.521, 305.872, 314.065, +395.995, 420.574, 395.995, 385.071, 401.457, +289.486, 281.293, 273.100, 270.369, 251.252, 223.942, 213.018, 204.825, +213.018, 221.211, 215.749, 210.287, 210.287, 213.018, 213.018, 207.556, +210.287, 221.211, 243.059, 237.597, 229.404, 229.404, 245.790, 234.866, +232.135, 229.404, 218.480, 232.135, 264.907, 284.024, 324.989, 324.989, +406.919, 401.457, 393.264, 398.726, 415.112, +292.217, 286.755, 281.293, 273.100, 253.983, 226.673, 213.018, 202.094, +202.094, 215.749, 213.018, 210.287, 207.556, 213.018, 218.480, 215.749, +207.556, 213.018, 226.673, 229.404, 221.211, 221.211, 229.404, 226.673, +223.942, 213.018, 213.018, 232.135, 234.866, 264.907, 286.755, 311.334, +395.995, 398.726, 404.188, 401.457, 409.650, +292.217, 286.755, 281.293, 264.907, 251.252, 229.404, 196.632, 196.632, +204.825, 210.287, 207.556, 204.825, 207.556, 215.749, 218.480, 218.480, +210.287, 207.556, 223.942, 221.211, 218.480, 221.211, 218.480, 218.480, +218.480, 210.287, 202.094, 202.094, 199.363, 210.287, 248.521, 300.410, +360.492, 385.071, 415.112, 415.112, 395.995, +292.217, 286.755, 281.293, 262.176, 251.252, 234.866, 199.363, 193.901, +199.363, 204.825, 204.825, 207.556, 207.556, 213.018, 218.480, 218.480, +218.480, 267.638, 218.480, 218.480, 223.942, 223.942, 218.480, 213.018, +207.556, 199.363, 193.901, 196.632, 193.901, 202.094, 218.480, 294.948, +324.989, 371.416, 431.498, 387.802, 374.147, +292.217, 284.024, 275.831, 264.907, 232.135, 237.597, 204.825, 191.170, +191.170, 202.094, 202.094, 204.825, 210.287, 213.018, 218.480, 223.942, +300.410, 319.527, 300.410, 213.018, 221.211, 226.673, 221.211, 213.018, +207.556, 199.363, 193.901, 188.439, 185.708, 193.901, 202.094, 259.445, +327.720, 376.878, 404.188, 390.533, 379.609 +}; + +const size_t array_float1_size = sizeof(array_float1); + +const float array_float2[YSIZE * XSIZE] = +{ +210.287, 199.363, 207.556, 218.480, 215.749, 204.825, 223.942, 177.515, +169.322, 174.784, 161.129, 161.129, 166.591, 196.632, 191.170, 182.977, +177.515, 191.170, 193.901, 191.170, 185.708, 180.246, 177.515, 182.977, +180.246, 180.246, 180.246, 180.246, 180.246, 180.246, 180.246, 180.246, +180.246, 177.515, 172.053, 172.053, 169.322, +204.825, 193.901, 193.901, 215.749, 221.211, 204.825, 221.211, 199.363, +161.129, 177.515, 163.860, 163.860, 174.784, 199.363, 199.363, 185.708, +180.246, 191.170, 196.632, 193.901, 185.708, 180.246, 180.246, 182.977, +180.246, 180.246, 180.246, 182.977, 182.977, 182.977, 180.246, 182.977, +180.246, 174.784, 172.053, 172.053, 172.053, +207.556, 193.901, 180.246, 199.363, 221.211, 213.018, 218.480, 215.749, +161.129, 180.246, 163.860, 161.129, 169.322, 202.094, 202.094, 193.901, +182.977, 191.170, 199.363, 193.901, 185.708, 180.246, 177.515, 177.515, +180.246, 180.246, 182.977, 182.977, 182.977, 182.977, 182.977, 182.977, +180.246, 174.784, 174.784, 174.784, 174.784, +207.556, 196.632, 174.784, 185.708, 215.749, 221.211, 218.480, 218.480, +161.129, 185.708, 163.860, 161.129, 163.860, 204.825, 204.825, 199.363, +182.977, 185.708, 199.363, 196.632, 185.708, 180.246, 177.515, 172.053, +182.977, 182.977, 182.977, 182.977, 185.708, 182.977, 182.977, 180.246, +177.515, 174.784, 177.515, 177.515, 177.515, +215.749, 196.632, 172.053, 180.246, 199.363, 218.480, 226.673, 223.942, +163.860, 177.515, 166.591, 166.591, 163.860, 180.246, 204.825, 204.825, +177.515, 191.170, 199.363, 196.632, 185.708, 180.246, 177.515, 174.784, +185.708, 182.977, 185.708, 185.708, 185.708, 182.977, 182.977, 180.246, +177.515, 177.515, 177.515, 180.246, 177.515, +221.211, 199.363, 169.322, 177.515, 196.632, 202.094, 223.942, 232.135, +180.246, 161.129, 169.322, 163.860, 163.860, 172.053, 204.825, 207.556, +185.708, 188.439, 196.632, 196.632, 185.708, 180.246, 180.246, 177.515, +182.977, 185.708, 185.708, 185.708, 185.708, 185.708, 180.246, 180.246, +174.784, 180.246, 177.515, 180.246, 180.246, +229.404, 202.094, 174.784, 174.784, 191.170, 193.901, 213.018, 229.404, +191.170, 158.398, 163.860, 161.129, 161.129, 172.053, 204.825, 218.480, +199.363, 182.977, 196.632, 196.632, 185.708, 180.246, 180.246, 177.515, +180.246, 185.708, 185.708, 185.708, 185.708, 185.708, 180.246, 177.515, +177.515, 177.515, 180.246, 182.977, 185.708, +237.597, 221.211, 180.246, 172.053, 177.515, 185.708, 207.556, 207.556, +204.825, 161.129, 158.398, 161.129, 161.129, 163.860, 193.901, 251.252, +177.515, 174.784, 202.094, 196.632, 188.439, 182.977, 177.515, 177.515, +177.515, 185.708, 188.439, 185.708, 188.439, 182.977, 177.515, 177.515, +177.515, 177.515, 182.977, 185.708, 188.439, +234.866, 234.866, 199.363, 174.784, 169.322, 182.977, 204.825, 207.556, +191.170, 166.591, 158.398, 158.398, 161.129, 163.860, 221.211, 185.708, +161.129, 172.053, 202.094, 245.790, 270.369, 182.977, 177.515, 177.515, +174.784, 182.977, 185.708, 185.708, 185.708, 182.977, 177.515, 177.515, +180.246, 177.515, 180.246, 185.708, 185.708, +232.135, 232.135, 218.480, 180.246, 182.977, 182.977, 221.211, 202.094, +169.322, 172.053, 161.129, 158.398, 158.398, 163.860, 253.983, 166.591, +161.129, 161.129, 185.708, 314.065, 207.556, 182.977, 180.246, 174.784, +174.784, 180.246, 185.708, 185.708, 185.708, 180.246, 177.515, 177.515, +180.246, 177.515, 174.784, 177.515, 188.439, +245.790, 237.597, 226.673, 193.901, 202.094, 210.287, 226.673, 215.749, +172.053, 163.860, 161.129, 161.129, 158.398, 158.398, 245.790, 166.591, +161.129, 161.129, 182.977, 218.480, 193.901, 185.708, 180.246, 174.784, +172.053, 172.053, 185.708, 185.708, 185.708, 180.246, 177.515, 180.246, +182.977, 177.515, 174.784, 169.322, 237.597, +248.521, 251.252, 234.866, 207.556, 213.018, 221.211, 232.135, 223.942, +182.977, 161.129, 161.129, 161.129, 161.129, 163.860, 240.328, 196.632, +161.129, 163.860, 202.094, 218.480, 191.170, 182.977, 180.246, 174.784, +169.322, 163.860, 177.515, 185.708, 182.977, 180.246, 177.515, 182.977, +180.246, 174.784, 169.322, 161.129, 303.141, +229.404, 229.404, 237.597, 232.135, 237.597, 232.135, 229.404, 229.404, +196.632, 161.129, 161.129, 161.129, 161.129, 161.129, 199.363, 193.901, +169.322, 161.129, 273.100, 191.170, 191.170, 182.977, 180.246, 174.784, +163.860, 158.398, 158.398, 182.977, 185.708, 180.246, 177.515, 180.246, +174.784, 172.053, 161.129, 152.936, 357.761, +218.480, 245.790, 237.597, 226.673, 240.328, 243.059, 229.404, 226.673, +207.556, 174.784, 161.129, 161.129, 161.129, 158.398, 161.129, 264.907, +174.784, 169.322, 193.901, 185.708, 191.170, 199.363, 180.246, 172.053, +166.591, 158.398, 158.398, 169.322, 182.977, 180.246, 174.784, 177.515, +172.053, 172.053, 166.591, 155.667, 406.919, +234.866, 248.521, 251.252, 237.597, 232.135, 240.328, 226.673, 221.211, +213.018, 188.439, 166.591, 161.129, 161.129, 161.129, 161.129, 166.591, +226.673, 196.632, 182.977, 182.977, 188.439, 188.439, 180.246, 174.784, +166.591, 196.632, 152.936, 155.667, 174.784, 174.784, 174.784, 174.784, +177.515, 314.065, 409.650, 253.983, 412.381, +264.907, 243.059, 248.521, 251.252, 243.059, 240.328, 202.094, 218.480, +213.018, 193.901, 177.515, 161.129, 158.398, 161.129, 158.398, 161.129, +193.901, 196.632, 182.977, 191.170, 191.170, 188.439, 182.977, 174.784, +172.053, 180.246, 152.936, 147.474, 155.667, 161.129, 174.784, 237.597, +379.609, 442.422, 436.960, 349.568, 385.071, +256.714, 262.176, 264.907, 256.714, 243.059, 223.942, 193.901, 191.170, +207.556, 199.363, 182.977, 166.591, 161.129, 161.129, 158.398, 161.129, +166.591, 193.901, 182.977, 204.825, 191.170, 185.708, 191.170, 177.515, +172.053, 172.053, 161.129, 152.936, 147.474, 150.205, 245.790, 330.451, +406.919, 458.808, 376.878, 393.264, 428.767, +270.369, 273.100, 253.983, 253.983, 223.942, 218.480, 191.170, 169.322, +191.170, 196.632, 182.977, 172.053, 163.860, 163.860, 158.398, 158.398, +163.860, 185.708, 191.170, 191.170, 188.439, 185.708, 215.749, 185.708, +174.784, 169.322, 163.860, 161.129, 155.667, 155.667, 240.328, 327.720, +412.381, 442.422, 420.574, 406.919, 423.305, +281.293, 270.369, 259.445, 256.714, 229.404, 199.363, 182.977, 169.322, +177.515, 188.439, 182.977, 174.784, 172.053, 174.784, 172.053, 161.129, +163.860, 177.515, 193.901, 188.439, 188.439, 182.977, 213.018, 177.515, +172.053, 166.591, 161.129, 166.591, 163.860, 185.708, 273.100, 349.568, +423.305, 423.305, 415.112, 423.305, 447.884, +284.024, 278.562, 270.369, 259.445, 234.866, 202.094, 182.977, 166.591, +166.591, 180.246, 177.515, 172.053, 172.053, 174.784, 177.515, 172.053, +163.860, 172.053, 191.170, 188.439, 182.977, 182.977, 182.977, 177.515, +169.322, 163.860, 158.398, 155.667, 169.322, 158.398, 193.901, 319.527, +409.650, 420.574, 428.767, 423.305, 445.153, +284.024, 275.831, 270.369, 248.521, 229.404, 202.094, 161.129, 161.129, +169.322, 174.784, 172.053, 166.591, 169.322, 174.784, 174.784, 174.784, +166.591, 163.860, 188.439, 185.708, 182.977, 188.439, 182.977, 177.515, +169.322, 161.129, 158.398, 155.667, 155.667, 152.936, 161.129, 284.024, +374.147, 401.457, 434.229, 439.691, 431.498, +284.024, 275.831, 270.369, 245.790, 232.135, 210.287, 163.860, 155.667, +163.860, 169.322, 169.322, 169.322, 172.053, 174.784, 177.515, 177.515, +180.246, 273.100, 182.977, 182.977, 188.439, 188.439, 182.977, 177.515, +172.053, 163.860, 158.398, 152.936, 147.474, 150.205, 152.936, 210.287, +333.182, 387.802, 453.346, 428.767, 409.650, +284.024, 275.831, 264.907, 251.252, 210.287, 215.749, 174.784, 155.667, +155.667, 169.322, 169.322, 169.322, 174.784, 177.515, 180.246, 177.515, +314.065, 376.878, 352.299, 174.784, 185.708, 191.170, 185.708, 180.246, +174.784, 163.860, 158.398, 152.936, 144.743, 144.743, 152.936, 169.322, +314.065, 390.533, 428.767, 426.036, 434.229 +}; + +const size_t array_float2_size = sizeof(array_float2); + +const double array_double1[YSIZE * XSIZE] = +{ +148.914762, 145.451628, 148.914762, 155.841030, 154.109463, 147.183195, +155.841030, 135.062226, 133.330659, 136.793793, 129.867525, 133.330659, +136.793793, 148.914762, 150.646329, 143.720061, 141.988494, 150.646329, +154.109463, 152.377896, 148.914762, 150.646329, 152.377896, 150.646329, +140.256927, 145.451628, 147.183195, 147.183195, 145.451628, 148.914762, +152.377896, 157.572597, 166.230432, 164.498865, 167.961999, 164.498865, +154.109463, +147.183195, 141.988494, 140.256927, 152.377896, 154.109463, 147.183195, +154.109463, 143.720061, 128.135958, 136.793793, 131.599092, 133.330659, +138.525360, 150.646329, 150.646329, 145.451628, 145.451628, 152.377896, +155.841030, 154.109463, 150.646329, 147.183195, 150.646329, 152.377896, +143.720061, 138.525360, 141.988494, 145.451628, 147.183195, 150.646329, +155.841030, 164.498865, 166.230432, 164.498865, 164.498865, 159.304164, +155.841030, +147.183195, 140.256927, 136.793793, 145.451628, 155.841030, 150.646329, +152.377896, 152.377896, 126.404391, 136.793793, 129.867525, 131.599092, +136.793793, 152.377896, 152.377896, 150.646329, 147.183195, 155.841030, +159.304164, 154.109463, 152.377896, 152.377896, 150.646329, 148.914762, +145.451628, 141.988494, 141.988494, 143.720061, 150.646329, 154.109463, +161.035731, 162.767298, 161.035731, 161.035731, 159.304164, 159.304164, +166.230432, +147.183195, 141.988494, 131.599092, 138.525360, 152.377896, 154.109463, +152.377896, 154.109463, 126.404391, 138.525360, 129.867525, 129.867525, +133.330659, 154.109463, 159.304164, 161.035731, 157.572597, 154.109463, +162.767298, 159.304164, 155.841030, 154.109463, 152.377896, 145.451628, +145.451628, 141.988494, 141.988494, 147.183195, 152.377896, 157.572597, +162.767298, 161.035731, 161.035731, 154.109463, 155.841030, 166.230432, +166.230432, +150.646329, 143.720061, 129.867525, 133.330659, 143.720061, 154.109463, +155.841030, 155.841030, 128.135958, 135.062226, 131.599092, 131.599092, +131.599092, 145.451628, 162.767298, 173.156700, 154.109463, 159.304164, +162.767298, 159.304164, 155.841030, 154.109463, 155.841030, 147.183195, +145.451628, 143.720061, 143.720061, 150.646329, 157.572597, 159.304164, +152.377896, 159.304164, 157.572597, 152.377896, 155.841030, 167.961999, +164.498865, +154.109463, 143.720061, 128.135958, 133.330659, 141.988494, 145.451628, +155.841030, 159.304164, 135.062226, 124.672824, 131.599092, 129.867525, +129.867525, 140.256927, 164.498865, 174.888267, 164.498865, 159.304164, +164.498865, 161.035731, 155.841030, 154.109463, 155.841030, 150.646329, +148.914762, 145.451628, 148.914762, 152.377896, 155.841030, 155.841030, +150.646329, 155.841030, 154.109463, 155.841030, 154.109463, 169.693566, +169.693566, +159.304164, 145.451628, 129.867525, 131.599092, 140.256927, 140.256927, +148.914762, 157.572597, 140.256927, 124.672824, 128.135958, 128.135958, +129.867525, 140.256927, 180.082968, 187.009236, 161.035731, 159.304164, +164.498865, 162.767298, 152.377896, 150.646329, 154.109463, 150.646329, +147.183195, 147.183195, 152.377896, 154.109463, 161.035731, 157.572597, +152.377896, 152.377896, 157.572597, 152.377896, 157.572597, 183.546102, +187.009236, +161.035731, 154.109463, 135.062226, 129.867525, 133.330659, 138.525360, +147.183195, 148.914762, 147.183195, 126.404391, 124.672824, 126.404391, +128.135958, 136.793793, 176.619834, 174.888267, 152.377896, 159.304164, +161.035731, 157.572597, 150.646329, 150.646329, 148.914762, 150.646329, +147.183195, 148.914762, 152.377896, 154.109463, 162.767298, 162.767298, +155.841030, 152.377896, 147.183195, 148.914762, 169.693566, 188.740803, +195.667071, +159.304164, 161.035731, 143.720061, 131.599092, 128.135958, 136.793793, +145.451628, 147.183195, 140.256927, 129.867525, 124.672824, 126.404391, +128.135958, 136.793793, 181.814535, 148.914762, 148.914762, 159.304164, +166.230432, 169.693566, 180.082968, 148.914762, 147.183195, 147.183195, +147.183195, 152.377896, 155.841030, 155.841030, 161.035731, 159.304164, +152.377896, 150.646329, 148.914762, 154.109463, 167.961999, 190.472370, +188.740803, +159.304164, 161.035731, 154.109463, 135.062226, 136.793793, 135.062226, +154.109463, 145.451628, 129.867525, 131.599092, 126.404391, 124.672824, +126.404391, 135.062226, 181.814535, 143.720061, 141.988494, 152.377896, +143.720061, 185.277669, 164.498865, 145.451628, 147.183195, 145.451628, +148.914762, 150.646329, 155.841030, 157.572597, 159.304164, 155.841030, +152.377896, 150.646329, 154.109463, 155.841030, 157.572597, 171.425133, +185.277669, +166.230432, 162.767298, 157.572597, 141.988494, 145.451628, 148.914762, +157.572597, 150.646329, 129.867525, 128.135958, 126.404391, 126.404391, +126.404391, 133.330659, 174.888267, 148.914762, 143.720061, 154.109463, +159.304164, 171.425133, 169.693566, 148.914762, 148.914762, 150.646329, +143.720061, 145.451628, 154.109463, 154.109463, 159.304164, 159.304164, +159.304164, 166.230432, 166.230432, 150.646329, 157.572597, 155.841030, +169.693566, +166.230432, 167.961999, 162.767298, 150.646329, 152.377896, 154.109463, +159.304164, 155.841030, 136.793793, 124.672824, 126.404391, 126.404391, +128.135958, 133.330659, 173.156700, 159.304164, 145.451628, 148.914762, +169.693566, 173.156700, 159.304164, 150.646329, 152.377896, 152.377896, +145.451628, 143.720061, 150.646329, 154.109463, 157.572597, 162.767298, +162.767298, 166.230432, 161.035731, 150.646329, 150.646329, 145.451628, +188.740803, +161.035731, 159.304164, 164.498865, 159.304164, 162.767298, 161.035731, +159.304164, 157.572597, 141.988494, 124.672824, 126.404391, 128.135958, +128.135958, 131.599092, 164.498865, 154.109463, 147.183195, 145.451628, +176.619834, 154.109463, 147.183195, 152.377896, 162.767298, 148.914762, +141.988494, 143.720061, 141.988494, 157.572597, 162.767298, 167.961999, +155.841030, 159.304164, 147.183195, 155.841030, 147.183195, 136.793793, +216.445875, +154.109463, 166.230432, 162.767298, 155.841030, 162.767298, 164.498865, +157.572597, 157.572597, 147.183195, 131.599092, 124.672824, 126.404391, +128.135958, 129.867525, 152.377896, 173.156700, 143.720061, 145.451628, +145.451628, 143.720061, 147.183195, 152.377896, 155.841030, 147.183195, +145.451628, 143.720061, 145.451628, 152.377896, 159.304164, 161.035731, +155.841030, 154.109463, 145.451628, 155.841030, 162.767298, 136.793793, +240.687813, +161.035731, 167.961999, 167.961999, 161.035731, 159.304164, 164.498865, +157.572597, 155.841030, 150.646329, 140.256927, 128.135958, 126.404391, +126.404391, 128.135958, 147.183195, 167.961999, 164.498865, 164.498865, +154.109463, 148.914762, 148.914762, 159.304164, 150.646329, 147.183195, +145.451628, 155.841030, 148.914762, 147.183195, 157.572597, 150.646329, +150.646329, 148.914762, 161.035731, 214.714308, 242.419380, 183.546102, +247.614081, +174.888267, 164.498865, 167.961999, 167.961999, 166.230432, 164.498865, +145.451628, 152.377896, 150.646329, 141.988494, 135.062226, 126.404391, +126.404391, 128.135958, 141.988494, 159.304164, 180.082968, 164.498865, +152.377896, 154.109463, 150.646329, 154.109463, 148.914762, 147.183195, +148.914762, 150.646329, 150.646329, 140.256927, 140.256927, 143.720061, +157.572597, 183.546102, 226.835277, 264.929751, 261.466617, 212.982741, +230.298411, +171.425133, 174.888267, 176.619834, 171.425133, 166.230432, 155.841030, +143.720061, 141.988494, 147.183195, 145.451628, 136.793793, 131.599092, +128.135958, 128.135958, 135.062226, 140.256927, 154.109463, 166.230432, +155.841030, 161.035731, 152.377896, 152.377896, 148.914762, 152.377896, +154.109463, 164.498865, 154.109463, 141.988494, 140.256927, 147.183195, +180.082968, 204.324906, 244.150947, 277.050720, 223.372143, 237.224679, +254.540349, +178.351401, 180.082968, 169.693566, 171.425133, 155.841030, 152.377896, +140.256927, 131.599092, 140.256927, 143.720061, 136.793793, 133.330659, +129.867525, 129.867525, 129.867525, 131.599092, 138.525360, 155.841030, +162.767298, 150.646329, 148.914762, 150.646329, 159.304164, 147.183195, +147.183195, 147.183195, 150.646329, 150.646329, 154.109463, 157.572597, +193.935504, 199.130205, 251.077215, 266.661318, 251.077215, 244.150947, +254.540349, +183.546102, 178.351401, 173.156700, 171.425133, 159.304164, 141.988494, +135.062226, 129.867525, 135.062226, 140.256927, 136.793793, 133.330659, +133.330659, 135.062226, 135.062226, 131.599092, 133.330659, 140.256927, +154.109463, 150.646329, 145.451628, 145.451628, 155.841030, 148.914762, +147.183195, 145.451628, 138.525360, 147.183195, 167.961999, 180.082968, +206.056473, 206.056473, 258.003483, 254.540349, 249.345648, 252.808782, +263.198184, +185.277669, 181.814535, 178.351401, 173.156700, 161.035731, 143.720061, +135.062226, 128.135958, 128.135958, 136.793793, 135.062226, 133.330659, +131.599092, 135.062226, 138.525360, 136.793793, 131.599092, 135.062226, +143.720061, 145.451628, 140.256927, 140.256927, 145.451628, 143.720061, +141.988494, 135.062226, 135.062226, 147.183195, 148.914762, 167.961999, +181.814535, 197.398638, 251.077215, 252.808782, 256.271916, 254.540349, +259.735050, +185.277669, 181.814535, 178.351401, 167.961999, 159.304164, 145.451628, +124.672824, 124.672824, 129.867525, 133.330659, 131.599092, 129.867525, +131.599092, 136.793793, 138.525360, 138.525360, 133.330659, 131.599092, +141.988494, 140.256927, 138.525360, 140.256927, 138.525360, 138.525360, +138.525360, 133.330659, 128.135958, 128.135958, 126.404391, 133.330659, +157.572597, 190.472370, 228.566844, 244.150947, 263.198184, 263.198184, +251.077215, +185.277669, 181.814535, 178.351401, 166.230432, 159.304164, 148.914762, +126.404391, 122.941257, 126.404391, 129.867525, 129.867525, 131.599092, +131.599092, 135.062226, 138.525360, 138.525360, 138.525360, 169.693566, +138.525360, 138.525360, 141.988494, 141.988494, 138.525360, 135.062226, +131.599092, 126.404391, 122.941257, 124.672824, 122.941257, 128.135958, +138.525360, 187.009236, 206.056473, 235.493112, 273.587586, 245.882514, +237.224679, +185.277669, 180.082968, 174.888267, 167.961999, 147.183195, 150.646329, +129.867525, 121.209690, 121.209690, 128.135958, 128.135958, 129.867525, +133.330659, 135.062226, 138.525360, 141.988494, 190.472370, 202.593339, +190.472370, 135.062226, 140.256927, 143.720061, 140.256927, 135.062226, +131.599092, 126.404391, 122.941257, 119.478123, 117.746556, 122.941257, +128.135958, 164.498865, 207.788040, 238.956246, 256.271916, 247.614081, +240.687813 +}; + +const size_t array_double1_size = sizeof(array_double1); + +const double array_double2[YSIZE * XSIZE] = +{ +133.330659, 126.404391, 131.599092, 138.525360, 136.793793, 129.867525, +141.988494, 112.551855, 107.357154, 110.820288, 102.162453, 102.162453, +105.625587, 124.672824, 121.209690, 116.014989, 112.551855, 121.209690, +122.941257, 121.209690, 117.746556, 114.283422, 112.551855, 116.014989, +114.283422, 114.283422, 114.283422, 114.283422, 114.283422, 114.283422, +114.283422, 114.283422, 114.283422, 112.551855, 109.088721, 109.088721, +107.357154, +129.867525, 122.941257, 122.941257, 136.793793, 140.256927, 129.867525, +140.256927, 126.404391, 102.162453, 112.551855, 103.894020, 103.894020, +110.820288, 126.404391, 126.404391, 117.746556, 114.283422, 121.209690, +124.672824, 122.941257, 117.746556, 114.283422, 114.283422, 116.014989, +114.283422, 114.283422, 114.283422, 116.014989, 116.014989, 116.014989, +114.283422, 116.014989, 114.283422, 110.820288, 109.088721, 109.088721, +109.088721, +131.599092, 122.941257, 114.283422, 126.404391, 140.256927, 135.062226, +138.525360, 136.793793, 102.162453, 114.283422, 103.894020, 102.162453, +107.357154, 128.135958, 128.135958, 122.941257, 116.014989, 121.209690, +126.404391, 122.941257, 117.746556, 114.283422, 112.551855, 112.551855, +114.283422, 114.283422, 116.014989, 116.014989, 116.014989, 116.014989, +116.014989, 116.014989, 114.283422, 110.820288, 110.820288, 110.820288, +110.820288, +131.599092, 124.672824, 110.820288, 117.746556, 136.793793, 140.256927, +138.525360, 138.525360, 102.162453, 117.746556, 103.894020, 102.162453, +103.894020, 129.867525, 129.867525, 126.404391, 116.014989, 117.746556, +126.404391, 124.672824, 117.746556, 114.283422, 112.551855, 109.088721, +116.014989, 116.014989, 116.014989, 116.014989, 117.746556, 116.014989, +116.014989, 114.283422, 112.551855, 110.820288, 112.551855, 112.551855, +112.551855, +136.793793, 124.672824, 109.088721, 114.283422, 126.404391, 138.525360, +143.720061, 141.988494, 103.894020, 112.551855, 105.625587, 105.625587, +103.894020, 114.283422, 129.867525, 129.867525, 112.551855, 121.209690, +126.404391, 124.672824, 117.746556, 114.283422, 112.551855, 110.820288, +117.746556, 116.014989, 117.746556, 117.746556, 117.746556, 116.014989, +116.014989, 114.283422, 112.551855, 112.551855, 112.551855, 114.283422, +112.551855, +140.256927, 126.404391, 107.357154, 112.551855, 124.672824, 128.135958, +141.988494, 147.183195, 114.283422, 102.162453, 107.357154, 103.894020, +103.894020, 109.088721, 129.867525, 131.599092, 117.746556, 119.478123, +124.672824, 124.672824, 117.746556, 114.283422, 114.283422, 112.551855, +116.014989, 117.746556, 117.746556, 117.746556, 117.746556, 117.746556, +114.283422, 114.283422, 110.820288, 114.283422, 112.551855, 114.283422, +114.283422, +145.451628, 128.135958, 110.820288, 110.820288, 121.209690, 122.941257, +135.062226, 145.451628, 121.209690, 100.430886, 103.894020, 102.162453, +102.162453, 109.088721, 129.867525, 138.525360, 126.404391, 116.014989, +124.672824, 124.672824, 117.746556, 114.283422, 114.283422, 112.551855, +114.283422, 117.746556, 117.746556, 117.746556, 117.746556, 117.746556, +114.283422, 112.551855, 112.551855, 112.551855, 114.283422, 116.014989, +117.746556, +150.646329, 140.256927, 114.283422, 109.088721, 112.551855, 117.746556, +131.599092, 131.599092, 129.867525, 102.162453, 100.430886, 102.162453, +102.162453, 103.894020, 122.941257, 159.304164, 112.551855, 110.820288, +128.135958, 124.672824, 119.478123, 116.014989, 112.551855, 112.551855, +112.551855, 117.746556, 119.478123, 117.746556, 119.478123, 116.014989, +112.551855, 112.551855, 112.551855, 112.551855, 116.014989, 117.746556, +119.478123, +148.914762, 148.914762, 126.404391, 110.820288, 107.357154, 116.014989, +129.867525, 131.599092, 121.209690, 105.625587, 100.430886, 100.430886, +102.162453, 103.894020, 140.256927, 117.746556, 102.162453, 109.088721, +128.135958, 155.841030, 171.425133, 116.014989, 112.551855, 112.551855, +110.820288, 116.014989, 117.746556, 117.746556, 117.746556, 116.014989, +112.551855, 112.551855, 114.283422, 112.551855, 114.283422, 117.746556, +117.746556, +147.183195, 147.183195, 138.525360, 114.283422, 116.014989, 116.014989, +140.256927, 128.135958, 107.357154, 109.088721, 102.162453, 100.430886, +100.430886, 103.894020, 161.035731, 105.625587, 102.162453, 102.162453, +117.746556, 199.130205, 131.599092, 116.014989, 114.283422, 110.820288, +110.820288, 114.283422, 117.746556, 117.746556, 117.746556, 114.283422, +112.551855, 112.551855, 114.283422, 112.551855, 110.820288, 112.551855, +119.478123, +155.841030, 150.646329, 143.720061, 122.941257, 128.135958, 133.330659, +143.720061, 136.793793, 109.088721, 103.894020, 102.162453, 102.162453, +100.430886, 100.430886, 155.841030, 105.625587, 102.162453, 102.162453, +116.014989, 138.525360, 122.941257, 117.746556, 114.283422, 110.820288, +109.088721, 109.088721, 117.746556, 117.746556, 117.746556, 114.283422, +112.551855, 114.283422, 116.014989, 112.551855, 110.820288, 107.357154, +150.646329, +157.572597, 159.304164, 148.914762, 131.599092, 135.062226, 140.256927, +147.183195, 141.988494, 116.014989, 102.162453, 102.162453, 102.162453, +102.162453, 103.894020, 152.377896, 124.672824, 102.162453, 103.894020, +128.135958, 138.525360, 121.209690, 116.014989, 114.283422, 110.820288, +107.357154, 103.894020, 112.551855, 117.746556, 116.014989, 114.283422, +112.551855, 116.014989, 114.283422, 110.820288, 107.357154, 102.162453, +192.203937, +145.451628, 145.451628, 150.646329, 147.183195, 150.646329, 147.183195, +145.451628, 145.451628, 124.672824, 102.162453, 102.162453, 102.162453, +102.162453, 102.162453, 126.404391, 122.941257, 107.357154, 102.162453, +173.156700, 121.209690, 121.209690, 116.014989, 114.283422, 110.820288, +103.894020, 100.430886, 100.430886, 116.014989, 117.746556, 114.283422, +112.551855, 114.283422, 110.820288, 109.088721, 102.162453, 96.967752, +226.835277, +138.525360, 155.841030, 150.646329, 143.720061, 152.377896, 154.109463, +145.451628, 143.720061, 131.599092, 110.820288, 102.162453, 102.162453, +102.162453, 100.430886, 102.162453, 167.961999, 110.820288, 107.357154, +122.941257, 117.746556, 121.209690, 126.404391, 114.283422, 109.088721, +105.625587, 100.430886, 100.430886, 107.357154, 116.014989, 114.283422, +110.820288, 112.551855, 109.088721, 109.088721, 105.625587, 98.699319, +258.003483, +148.914762, 157.572597, 159.304164, 150.646329, 147.183195, 152.377896, +143.720061, 140.256927, 135.062226, 119.478123, 105.625587, 102.162453, +102.162453, 102.162453, 102.162453, 105.625587, 143.720061, 124.672824, +116.014989, 116.014989, 119.478123, 119.478123, 114.283422, 110.820288, +105.625587, 124.672824, 96.967752, 98.699319, 110.820288, 110.820288, +110.820288, 110.820288, 112.551855, 199.130205, 259.735050, 161.035731, +261.466617, +167.961999, 154.109463, 157.572597, 159.304164, 154.109463, 152.377896, +128.135958, 138.525360, 135.062226, 122.941257, 112.551855, 102.162453, +100.430886, 102.162453, 100.430886, 102.162453, 122.941257, 124.672824, +116.014989, 121.209690, 121.209690, 119.478123, 116.014989, 110.820288, +109.088721, 114.283422, 96.967752, 93.504618, 98.699319, 102.162453, +110.820288, 150.646329, 240.687813, 280.513854, 277.050720, 221.640576, +244.150947, +162.767298, 166.230432, 167.961999, 162.767298, 154.109463, 141.988494, +122.941257, 121.209690, 131.599092, 126.404391, 116.014989, 105.625587, +102.162453, 102.162453, 100.430886, 102.162453, 105.625587, 122.941257, +116.014989, 129.867525, 121.209690, 117.746556, 121.209690, 112.551855, +109.088721, 109.088721, 102.162453, 96.967752, 93.504618, 95.236185, +155.841030, 209.519607, 258.003483, 290.903256, 238.956246, 249.345648, +271.856019, +171.425133, 173.156700, 161.035731, 161.035731, 141.988494, 138.525360, +121.209690, 107.357154, 121.209690, 124.672824, 116.014989, 109.088721, +103.894020, 103.894020, 100.430886, 100.430886, 103.894020, 117.746556, +121.209690, 121.209690, 119.478123, 117.746556, 136.793793, 117.746556, +110.820288, 107.357154, 103.894020, 102.162453, 98.699319, 98.699319, +152.377896, 207.788040, 261.466617, 280.513854, 266.661318, 258.003483, +268.392885, +178.351401, 171.425133, 164.498865, 162.767298, 145.451628, 126.404391, +116.014989, 107.357154, 112.551855, 119.478123, 116.014989, 110.820288, +109.088721, 110.820288, 109.088721, 102.162453, 103.894020, 112.551855, +122.941257, 119.478123, 119.478123, 116.014989, 135.062226, 112.551855, +109.088721, 105.625587, 102.162453, 105.625587, 103.894020, 117.746556, +173.156700, 221.640576, 268.392885, 268.392885, 263.198184, 268.392885, +283.976988, +180.082968, 176.619834, 171.425133, 164.498865, 148.914762, 128.135958, +116.014989, 105.625587, 105.625587, 114.283422, 112.551855, 109.088721, +109.088721, 110.820288, 112.551855, 109.088721, 103.894020, 109.088721, +121.209690, 119.478123, 116.014989, 116.014989, 116.014989, 112.551855, +107.357154, 103.894020, 100.430886, 98.699319, 107.357154, 100.430886, +122.941257, 202.593339, 259.735050, 266.661318, 271.856019, 268.392885, +282.245421, +180.082968, 174.888267, 171.425133, 157.572597, 145.451628, 128.135958, +102.162453, 102.162453, 107.357154, 110.820288, 109.088721, 105.625587, +107.357154, 110.820288, 110.820288, 110.820288, 105.625587, 103.894020, +119.478123, 117.746556, 116.014989, 119.478123, 116.014989, 112.551855, +107.357154, 102.162453, 100.430886, 98.699319, 98.699319, 96.967752, +102.162453, 180.082968, 237.224679, 254.540349, 275.319153, 278.782287, +273.587586, +180.082968, 174.888267, 171.425133, 155.841030, 147.183195, 133.330659, +103.894020, 98.699319, 103.894020, 107.357154, 107.357154, 107.357154, +109.088721, 110.820288, 112.551855, 112.551855, 114.283422, 173.156700, +116.014989, 116.014989, 119.478123, 119.478123, 116.014989, 112.551855, +109.088721, 103.894020, 100.430886, 96.967752, 93.504618, 95.236185, +96.967752, 133.330659, 211.251174, 245.882514, 287.440122, 271.856019, +259.735050, +180.082968, 174.888267, 167.961999, 159.304164, 133.330659, 136.793793, +110.820288, 98.699319, 98.699319, 107.357154, 107.357154, 107.357154, +110.820288, 112.551855, 114.283422, 112.551855, 199.130205, 238.956246, +223.372143, 110.820288, 117.746556, 121.209690, 117.746556, 114.283422, +110.820288, 103.894020, 100.430886, 96.967752, 91.773051, 91.773051, +96.967752, 107.357154, 199.130205, 247.614081, 271.856019, 270.124452, +275.319153 +}; + +const size_t array_double2_size = sizeof(array_double2); + +/* vim: set ts=8 sts=8 sw=8 noet: */ diff --git a/src/SDL2/external/tiff-4.0.3/test/test_arrays.h b/src/SDL2/external/tiff-4.0.3/test/test_arrays.h new file mode 100644 index 000000000..5131b2310 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/test_arrays.h @@ -0,0 +1,63 @@ +/* $Id: test_arrays.h,v 1.3 2006/03/23 14:54:02 dron Exp $ */ + +/* + * Copyright (c) 2004, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * TIFF Library + * + * Few declarations for the test numerical arrays. + */ + +#ifndef _TEST_ARRAYS_ +#define _TEST_ARRAYS_ + +#include + +#define XSIZE 37 +#define YSIZE 23 + +extern const unsigned char byte_array1[]; +extern const size_t byte_array1_size; + +extern const unsigned char byte_array2[]; +extern const size_t byte_array2_size; + +extern const unsigned char byte_array3[]; +extern const size_t byte_array3_size; + +extern const float array_float1[]; +extern const size_t array_float1_size; + +extern const float array_float2[]; +extern const size_t array_float2_size; + +extern const double array_double1[]; +extern const size_t array_double1_size; + +extern const double array_double2[]; +extern const size_t array_double2_size; + +#endif /* _TEST_ARRAYS_ */ + +/* vim: set ts=8 sts=8 sw=8 noet: */ diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2pdf.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2pdf.sh new file mode 100755 index 000000000..76699895c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2pdf.sh @@ -0,0 +1,6 @@ +#!/bin/sh +# +# Basic sanity check for tiff2pdf +# +. ${srcdir:-.}/common.sh +f_test_stdout "${TIFF2PDF}" "${IMG_MINISWHITE_1C_1B}" "o-tiff2pdf.pdf" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2ps-EPS1.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2ps-EPS1.sh new file mode 100755 index 000000000..ebe6f04b6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2ps-EPS1.sh @@ -0,0 +1,6 @@ +#!/bin/sh +# +# Basic sanity check for tiffps with PostScript Level 1 encapsulated output +# +. ${srcdir:-.}/common.sh +f_test_stdout "${TIFF2PS} -e -1" "${IMG_MINISWHITE_1C_1B}" "o-tiff2ps-EPS1.ps" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS1.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS1.sh new file mode 100755 index 000000000..659215977 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS1.sh @@ -0,0 +1,6 @@ +#!/bin/sh +# +# Basic sanity check for tiffps with PostScript Level 1 output +# +. ${srcdir:-.}/common.sh +f_test_stdout "${TIFF2PS} -a -p -1" "${IMG_MINISWHITE_1C_1B}" "o-tiff2ps-PS1.ps" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS2.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS2.sh new file mode 100755 index 000000000..2a2160697 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS2.sh @@ -0,0 +1,6 @@ +#!/bin/sh +# +# Basic sanity check for tiffps with PostScript Level 2 output +# +. ${srcdir:-.}/common.sh +f_test_stdout "${TIFF2PS} -a -p -2" "${IMG_MINISWHITE_1C_1B}" "o-tiff2ps-PS2.ps" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS3.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS3.sh new file mode 100755 index 000000000..f9f34b668 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2ps-PS3.sh @@ -0,0 +1,6 @@ +#!/bin/sh +# +# Basic sanity check for tiffps with PostScript Level 3 output +# +. ${srcdir:-.}/common.sh +f_test_stdout "${TIFF2PS} -a -p -3" "${IMG_MINISWHITE_1C_1B}" "o-tiff2ps-PS3.ps" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-logluv-3c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-logluv-3c-16b.sh new file mode 100755 index 000000000..bc9b31181 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-logluv-3c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/logluv-3c-16b.tiff" +outfile="o-tiff2rgba-logluv-3c-16b.tiff" +f_test_convert "$TIFF2RGBA" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-1c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-1c-16b.sh new file mode 100755 index 000000000..5be7e65b6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-1c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-1c-16b.tiff" +outfile="o-tiff2rgba-minisblack-1c-16b.tiff" +f_test_convert "$TIFF2RGBA" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-1c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-1c-8b.sh new file mode 100755 index 000000000..ce0507bcb --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-1c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-1c-8b.tiff" +outfile="o-tiff2rgba-minisblack-1c-8b.tiff" +f_test_convert "$TIFF2RGBA" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-2c-8b-alpha.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-2c-8b-alpha.sh new file mode 100755 index 000000000..2cbe81d5e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-minisblack-2c-8b-alpha.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-2c-8b-alpha.tiff" +outfile="o-tiff2rgba-minisblack-2c-8b-alpha.tiff" +f_test_convert "$TIFF2RGBA" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-miniswhite-1c-1b.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-miniswhite-1c-1b.sh new file mode 100755 index 000000000..360150281 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-miniswhite-1c-1b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/miniswhite-1c-1b.tiff" +outfile="o-tiff2rgba-miniswhite-1c-1b.tiff" +f_test_convert "$TIFF2RGBA" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-1b.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-1b.sh new file mode 100755 index 000000000..091d79883 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-1b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-1b.tiff" +outfile="o-tiff2rgba-palette-1c-1b.tiff" +f_test_convert "$TIFF2RGBA" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-4b.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-4b.sh new file mode 100755 index 000000000..ee3898eb4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-4b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-4b.tiff" +outfile="o-tiff2rgba-palette-1c-4b.tiff" +f_test_convert "$TIFF2RGBA" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-8b.sh new file mode 100755 index 000000000..b1db606f5 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-palette-1c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-8b.tiff" +outfile="o-tiff2rgba-palette-1c-8b.tiff" +f_test_convert "$TIFF2RGBA" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-quad-tile.jpg.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-quad-tile.jpg.sh new file mode 100755 index 000000000..e921b9730 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-quad-tile.jpg.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/quad-tile.jpg.tiff" +outfile="o-tiff2rgba-quad-tile.jpg.tiff" +f_test_convert "$TIFF2RGBA" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-rgb-3c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-rgb-3c-16b.sh new file mode 100755 index 000000000..954eb4fda --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-rgb-3c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/rgb-3c-16b.tiff" +outfile="o-tiff2rgba-rgb-3c-16b.tiff" +f_test_convert "$TIFF2RGBA" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-rgb-3c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-rgb-3c-8b.sh new file mode 100755 index 000000000..24f5cb036 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiff2rgba-rgb-3c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/rgb-3c-8b.tiff" +outfile="o-tiff2rgba-rgb-3c-8b.tiff" +f_test_convert "$TIFF2RGBA" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-1d-fill.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-1d-fill.sh new file mode 100755 index 000000000..ee1249836 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-1d-fill.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# +# Basic sanity check for tiffcp with G3 compression, 1 dimensional +# encoding, and zero-filled boundaries. +# +. ${srcdir:-.}/common.sh +f_test_convert "${TIFFCP} -c g3:1d:fill" "${IMG_MINISWHITE_1C_1B}" "o-tiffcp-g3-1d-fill.tiff" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-1d.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-1d.sh new file mode 100755 index 000000000..c11ef97f0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-1d.sh @@ -0,0 +1,6 @@ +#!/bin/sh +# +# Basic sanity check for tiffcp with G3 compression and 1 dimensional encoding. +# +. ${srcdir:-.}/common.sh +f_test_convert "${TIFFCP} -c g3:1d" "${IMG_MINISWHITE_1C_1B}" "o-tiffcp-g3-1d.tiff" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-2d-fill.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-2d-fill.sh new file mode 100755 index 000000000..c25825dab --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-2d-fill.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# +# Basic sanity check for tiffcp with G3 compression, 2 dimensional +# encoding, and zero-filled boundaries. +# +. ${srcdir:-.}/common.sh +f_test_convert "${TIFFCP} -c g3:2d:fill" "${IMG_MINISWHITE_1C_1B}" "o-tiffcp-g3-2d-fill.tiff" diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-2d.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-2d.sh new file mode 100755 index 000000000..5a59dd2b7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3-2d.sh @@ -0,0 +1,6 @@ +#!/bin/sh +# +# Basic sanity check for tiffcp with G3 compression and 2 dimensional encoding. +# +. ${srcdir:-.}/common.sh +f_test_convert "${TIFFCP} -c g3:2d" "${IMG_MINISWHITE_1C_1B}" "o-tiffcp-g3-2d.tiff" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3.sh new file mode 100755 index 000000000..d7a0107a8 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g3.sh @@ -0,0 +1,6 @@ +#!/bin/sh +# +# Basic sanity check for tiffcp with G3 compression +# +. ${srcdir:-.}/common.sh +f_test_convert "${TIFFCP} -c g3" "${IMG_MINISWHITE_1C_1B}" "o-tiffcp-g3.tiff" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcp-g4.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g4.sh new file mode 100755 index 000000000..fb8967afb --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcp-g4.sh @@ -0,0 +1,6 @@ +#!/bin/sh +# +# Basic sanity check for tiffcp with G4 compression +# +. ${srcdir:-.}/common.sh +f_test_convert "${TIFFCP} -c g4" "${IMG_MINISWHITE_1C_1B}" "o-tiffcp-g4.tiff" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcp-logluv.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcp-logluv.sh new file mode 100755 index 000000000..3f62f57b6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcp-logluv.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# +# Basic sanity check for tiffcp with logluv compression +# +. ${srcdir:-.}/common.sh +f_test_convert "${TIFFCP} -c none" "${srcdir}/images/logluv-3c-16b.tiff" "o-tiffcp-logluv-raw.tiff" +f_test_convert "${TIFFCP} -c sgilog" "o-tiffcp-logluv-raw.tiff" "o-tiffcp-logluv-sgilog.tiff" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcp-split-join.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcp-split-join.sh new file mode 100755 index 000000000..d1e407c92 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcp-split-join.sh @@ -0,0 +1,16 @@ +#!/bin/sh +# +# Basic sanity check for tiffcp + tiffsplit + tiffcp +# +# First we use tiffcp to join our test files into a multi-frame TIFF +# then we use tiffsplit to split them out again, and then we use +# tiffcp to recombine again. + +. ${srcdir:-.}/common.sh +conjoined=o-tiffcp-split-join-conjoined.tif +reconjoined=o-tiffcp-split-join-reconjoined.tif +splitfile=o-tiffcp-split-join-split- + +f_test_convert "${TIFFCP}" "${IMG_UNCOMPRESSED}" "${conjoined}" +f_test_convert "${TIFFSPLIT}" "${conjoined}" "${splitfile}" +f_test_convert "${TIFFCP}" "${splitfile}*" "${reconjoined}" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcp-split.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcp-split.sh new file mode 100755 index 000000000..a2f98e33e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcp-split.sh @@ -0,0 +1,13 @@ +#!/bin/sh +# +# Basic sanity check for tiffcp + tiffsplit +# +# First we use tiffcp to join our test files into a multi-frame TIFF +# and then we use tiffsplit to split them out again. +# +. ${srcdir:-.}/common.sh +conjoined=o-tiffcp-split-conjoined.tif +splitfile=o-tiffcp-split-split- + +f_test_convert "${TIFFCP}" "${IMG_UNCOMPRESSED}" "${conjoined}" +f_test_convert "${TIFFSPLIT}" "${conjoined}" "${splitfile}" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcp-thumbnail.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcp-thumbnail.sh new file mode 100755 index 000000000..789cd802b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcp-thumbnail.sh @@ -0,0 +1,10 @@ +#!/bin/sh +# +# Basic sanity check for thumbnail +# +. ${srcdir:-.}/common.sh + +outfile1=o-tiffcp-thumbnail-in.tif +outfile2=o-tiffcp-thumbnail-out.tif +f_test_convert "${TIFFCP} -c g3:1d" "${IMG_MINISWHITE_1C_1B}" "${outfile1}" +f_test_convert "${THUMBNAIL}" "${outfile1}" "${outfile2}" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-logluv-3c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-logluv-3c-16b.sh new file mode 100755 index 000000000..9ed219e32 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-logluv-3c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/logluv-3c-16b.tiff" +outfile="o-tiffcrop-R90-logluv-3c-16b.tiff" +f_test_convert "$TIFFCROP -R90" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-1c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-1c-16b.sh new file mode 100755 index 000000000..faee731e9 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-1c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-1c-16b.tiff" +outfile="o-tiffcrop-R90-minisblack-1c-16b.tiff" +f_test_convert "$TIFFCROP -R90" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-1c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-1c-8b.sh new file mode 100755 index 000000000..7acd5e79f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-1c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-1c-8b.tiff" +outfile="o-tiffcrop-R90-minisblack-1c-8b.tiff" +f_test_convert "$TIFFCROP -R90" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-2c-8b-alpha.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-2c-8b-alpha.sh new file mode 100755 index 000000000..2ef903916 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-minisblack-2c-8b-alpha.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-2c-8b-alpha.tiff" +outfile="o-tiffcrop-R90-minisblack-2c-8b-alpha.tiff" +f_test_convert "$TIFFCROP -R90" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-miniswhite-1c-1b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-miniswhite-1c-1b.sh new file mode 100755 index 000000000..cae85f221 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-miniswhite-1c-1b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/miniswhite-1c-1b.tiff" +outfile="o-tiffcrop-R90-miniswhite-1c-1b.tiff" +f_test_convert "$TIFFCROP -R90" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-1b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-1b.sh new file mode 100755 index 000000000..ca68b88db --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-1b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-1b.tiff" +outfile="o-tiffcrop-R90-palette-1c-1b.tiff" +f_test_convert "$TIFFCROP -R90" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-4b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-4b.sh new file mode 100755 index 000000000..3cd96ebf1 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-4b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-4b.tiff" +outfile="o-tiffcrop-R90-palette-1c-4b.tiff" +f_test_convert "$TIFFCROP -R90" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-8b.sh new file mode 100755 index 000000000..daccfd3f3 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-palette-1c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-8b.tiff" +outfile="o-tiffcrop-R90-palette-1c-8b.tiff" +f_test_convert "$TIFFCROP -R90" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-rgb-3c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-rgb-3c-16b.sh new file mode 100755 index 000000000..b1dddc308 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-rgb-3c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/rgb-3c-16b.tiff" +outfile="o-tiffcrop-R90-rgb-3c-16b.tiff" +f_test_convert "$TIFFCROP -R90" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-rgb-3c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-rgb-3c-8b.sh new file mode 100755 index 000000000..0a502c8c8 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-R90-rgb-3c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/rgb-3c-8b.tiff" +outfile="o-tiffcrop-R90-rgb-3c-8b.tiff" +f_test_convert "$TIFFCROP -R90" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-logluv-3c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-logluv-3c-16b.sh new file mode 100755 index 000000000..c1b19b992 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-logluv-3c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/logluv-3c-16b.tiff" +outfile="o-tiffcrop-doubleflip-logluv-3c-16b.tiff" +f_test_convert "$TIFFCROP -F both" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-1c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-1c-16b.sh new file mode 100755 index 000000000..1e2c4c96b --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-1c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-1c-16b.tiff" +outfile="o-tiffcrop-doubleflip-minisblack-1c-16b.tiff" +f_test_convert "$TIFFCROP -F both" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-1c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-1c-8b.sh new file mode 100755 index 000000000..77798d92c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-1c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-1c-8b.tiff" +outfile="o-tiffcrop-doubleflip-minisblack-1c-8b.tiff" +f_test_convert "$TIFFCROP -F both" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh new file mode 100755 index 000000000..b5b9db684 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-minisblack-2c-8b-alpha.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-2c-8b-alpha.tiff" +outfile="o-tiffcrop-doubleflip-minisblack-2c-8b-alpha.tiff" +f_test_convert "$TIFFCROP -F both" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-miniswhite-1c-1b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-miniswhite-1c-1b.sh new file mode 100755 index 000000000..07aab91f7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-miniswhite-1c-1b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/miniswhite-1c-1b.tiff" +outfile="o-tiffcrop-doubleflip-miniswhite-1c-1b.tiff" +f_test_convert "$TIFFCROP -F both" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-1b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-1b.sh new file mode 100755 index 000000000..581f7eb62 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-1b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-1b.tiff" +outfile="o-tiffcrop-doubleflip-palette-1c-1b.tiff" +f_test_convert "$TIFFCROP -F both" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-4b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-4b.sh new file mode 100755 index 000000000..d09b2aa5e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-4b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-4b.tiff" +outfile="o-tiffcrop-doubleflip-palette-1c-4b.tiff" +f_test_convert "$TIFFCROP -F both" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-8b.sh new file mode 100755 index 000000000..53a08aef7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-palette-1c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-8b.tiff" +outfile="o-tiffcrop-doubleflip-palette-1c-8b.tiff" +f_test_convert "$TIFFCROP -F both" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-rgb-3c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-rgb-3c-16b.sh new file mode 100755 index 000000000..7165ad52d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-rgb-3c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/rgb-3c-16b.tiff" +outfile="o-tiffcrop-doubleflip-rgb-3c-16b.tiff" +f_test_convert "$TIFFCROP -F both" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-rgb-3c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-rgb-3c-8b.sh new file mode 100755 index 000000000..6bfa06700 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-doubleflip-rgb-3c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/rgb-3c-8b.tiff" +outfile="o-tiffcrop-doubleflip-rgb-3c-8b.tiff" +f_test_convert "$TIFFCROP -F both" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-logluv-3c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-logluv-3c-16b.sh new file mode 100755 index 000000000..821694bd6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-logluv-3c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/logluv-3c-16b.tiff" +outfile="o-tiffcrop-extract-logluv-3c-16b.tiff" +f_test_convert "$TIFFCROP -U px -E top -X 60 -Y 60" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-1c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-1c-16b.sh new file mode 100755 index 000000000..603fc1ccd --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-1c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-1c-16b.tiff" +outfile="o-tiffcrop-extract-minisblack-1c-16b.tiff" +f_test_convert "$TIFFCROP -U px -E top -X 60 -Y 60" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-1c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-1c-8b.sh new file mode 100755 index 000000000..6e473c5c9 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-1c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-1c-8b.tiff" +outfile="o-tiffcrop-extract-minisblack-1c-8b.tiff" +f_test_convert "$TIFFCROP -U px -E top -X 60 -Y 60" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-2c-8b-alpha.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-2c-8b-alpha.sh new file mode 100755 index 000000000..976e888e6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-minisblack-2c-8b-alpha.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-2c-8b-alpha.tiff" +outfile="o-tiffcrop-extract-minisblack-2c-8b-alpha.tiff" +f_test_convert "$TIFFCROP -U px -E top -X 60 -Y 60" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-miniswhite-1c-1b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-miniswhite-1c-1b.sh new file mode 100755 index 000000000..ca2b63cc7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-miniswhite-1c-1b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/miniswhite-1c-1b.tiff" +outfile="o-tiffcrop-extract-miniswhite-1c-1b.tiff" +f_test_convert "$TIFFCROP -U px -E top -X 60 -Y 60" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-1b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-1b.sh new file mode 100755 index 000000000..e4aca8e53 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-1b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-1b.tiff" +outfile="o-tiffcrop-extract-palette-1c-1b.tiff" +f_test_convert "$TIFFCROP -U px -E top -X 60 -Y 60" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-4b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-4b.sh new file mode 100755 index 000000000..18884e45e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-4b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-4b.tiff" +outfile="o-tiffcrop-extract-palette-1c-4b.tiff" +f_test_convert "$TIFFCROP -U px -E top -X 60 -Y 60" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-8b.sh new file mode 100755 index 000000000..cd418e0ec --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-palette-1c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-8b.tiff" +outfile="o-tiffcrop-extract-palette-1c-8b.tiff" +f_test_convert "$TIFFCROP -U px -E top -X 60 -Y 60" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-rgb-3c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-rgb-3c-16b.sh new file mode 100755 index 000000000..a3899d398 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-rgb-3c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/rgb-3c-16b.tiff" +outfile="o-tiffcrop-extract-rgb-3c-16b.tiff" +f_test_convert "$TIFFCROP -U px -E top -X 60 -Y 60" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-rgb-3c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-rgb-3c-8b.sh new file mode 100755 index 000000000..c03b03755 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extract-rgb-3c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/rgb-3c-8b.tiff" +outfile="o-tiffcrop-extract-rgb-3c-8b.tiff" +f_test_convert "$TIFFCROP -U px -E top -X 60 -Y 60" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-logluv-3c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-logluv-3c-16b.sh new file mode 100755 index 000000000..a617ad9d7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-logluv-3c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/logluv-3c-16b.tiff" +outfile="o-tiffcrop-extractz14-logluv-3c-16b.tiff" +f_test_convert "$TIFFCROP -E left -Z1:4,2:4" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-1c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-1c-16b.sh new file mode 100755 index 000000000..320fd5ac2 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-1c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-1c-16b.tiff" +outfile="o-tiffcrop-extractz14-minisblack-1c-16b.tiff" +f_test_convert "$TIFFCROP -E left -Z1:4,2:4" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-1c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-1c-8b.sh new file mode 100755 index 000000000..8df857838 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-1c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-1c-8b.tiff" +outfile="o-tiffcrop-extractz14-minisblack-1c-8b.tiff" +f_test_convert "$TIFFCROP -E left -Z1:4,2:4" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-2c-8b-alpha.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-2c-8b-alpha.sh new file mode 100755 index 000000000..3e8ee1571 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-minisblack-2c-8b-alpha.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/minisblack-2c-8b-alpha.tiff" +outfile="o-tiffcrop-extractz14-minisblack-2c-8b-alpha.tiff" +f_test_convert "$TIFFCROP -E left -Z1:4,2:4" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-miniswhite-1c-1b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-miniswhite-1c-1b.sh new file mode 100755 index 000000000..2cbffaad0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-miniswhite-1c-1b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/miniswhite-1c-1b.tiff" +outfile="o-tiffcrop-extractz14-miniswhite-1c-1b.tiff" +f_test_convert "$TIFFCROP -E left -Z1:4,2:4" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-1b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-1b.sh new file mode 100755 index 000000000..e0b305f42 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-1b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-1b.tiff" +outfile="o-tiffcrop-extractz14-palette-1c-1b.tiff" +f_test_convert "$TIFFCROP -E left -Z1:4,2:4" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-4b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-4b.sh new file mode 100755 index 000000000..980b2bb37 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-4b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-4b.tiff" +outfile="o-tiffcrop-extractz14-palette-1c-4b.tiff" +f_test_convert "$TIFFCROP -E left -Z1:4,2:4" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-8b.sh new file mode 100755 index 000000000..af2e04ccc --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-palette-1c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/palette-1c-8b.tiff" +outfile="o-tiffcrop-extractz14-palette-1c-8b.tiff" +f_test_convert "$TIFFCROP -E left -Z1:4,2:4" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-rgb-3c-16b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-rgb-3c-16b.sh new file mode 100755 index 000000000..9bc76e358 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-rgb-3c-16b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/rgb-3c-16b.tiff" +outfile="o-tiffcrop-extractz14-rgb-3c-16b.tiff" +f_test_convert "$TIFFCROP -E left -Z1:4,2:4" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-rgb-3c-8b.sh b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-rgb-3c-8b.sh new file mode 100755 index 000000000..21f76b828 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffcrop-extractz14-rgb-3c-8b.sh @@ -0,0 +1,7 @@ +#!/bin/sh +# Generated file, master is Makefile.am +. ${srcdir:-.}/common.sh +infile="$srcdir/images/rgb-3c-8b.tiff" +outfile="o-tiffcrop-extractz14-rgb-3c-8b.tiff" +f_test_convert "$TIFFCROP -E left -Z1:4,2:4" $infile $outfile +f_tiffinfo_validate $outfile diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffdump.sh b/src/SDL2/external/tiff-4.0.3/test/tiffdump.sh new file mode 100755 index 000000000..3cd7c10b6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffdump.sh @@ -0,0 +1,6 @@ +#!/bin/sh +# +# Basic sanity check for tiffdump +# +. ${srcdir:-.}/common.sh +f_test_reader "${TIFFDUMP}" "${IMG_MINISWHITE_1C_1B}" \ No newline at end of file diff --git a/src/SDL2/external/tiff-4.0.3/test/tiffinfo.sh b/src/SDL2/external/tiff-4.0.3/test/tiffinfo.sh new file mode 100755 index 000000000..cb572483c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tiffinfo.sh @@ -0,0 +1,6 @@ +#!/bin/sh +# +# Basic sanity check for tiffinfo. +# +. ${srcdir:-.}/common.sh +f_test_reader "${TIFFINFO} -c -D -d -j -s " "${IMG_MINISBLACK_1C_16B}" diff --git a/src/SDL2/external/tiff-4.0.3/test/tifftest.h b/src/SDL2/external/tiff-4.0.3/test/tifftest.h new file mode 100644 index 000000000..33052064d --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/test/tifftest.h @@ -0,0 +1,42 @@ +/* $Id: tifftest.h,v 1.1 2008/04/15 14:18:36 dron Exp $ */ + +/* + * Copyright (c) 2008, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _TIFFTEST_ +#define _TIFFTEST_ + +/* + * TIFF Library + * + * Header file for helper testing routines. + */ + +#include "tiffio.h" + +int CheckShortField(TIFF *, const ttag_t, const uint16); +int CheckShortPairedField(TIFF *, const ttag_t, const uint16*); +int CheckLongField(TIFF *, const ttag_t, const uint32); + +#endif /* _TIFFTEST_ */ + diff --git a/src/SDL2/external/tiff-4.0.3/tools/Makefile.am b/src/SDL2/external/tiff-4.0.3/tools/Makefile.am new file mode 100644 index 000000000..6497f2dca --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/Makefile.am @@ -0,0 +1,145 @@ +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +LIBPORT = $(top_builddir)/port/libport.la +LIBTIFF = $(top_builddir)/libtiff/libtiff.la + +EXTRA_DIST = Makefile.vc + +bin_PROGRAMS = \ + bmp2tiff \ + fax2ps \ + fax2tiff \ + gif2tiff \ + pal2rgb \ + ppm2tiff \ + ras2tiff \ + raw2tiff \ + rgb2ycbcr \ + thumbnail \ + tiff2bw \ + tiff2pdf \ + tiff2ps \ + tiff2rgba \ + tiffcmp \ + tiffcp \ + tiffcrop \ + tiffdither \ + tiffdump \ + tiffinfo \ + tiffmedian \ + tiffset \ + tiffsplit +if HAVE_OPENGL +bin_PROGRAMS += tiffgt +endif + +EXTRA_PROGRAMS = sgi2tiff sgisv ycbcr + +if HAVE_RPATH +AM_LDFLAGS = $(LIBDIR) +endif + +bmp2tiff_SOURCES = bmp2tiff.c +bmp2tiff_LDADD = $(LIBTIFF) $(LIBPORT) + +fax2ps_SOURCES = fax2ps.c +fax2ps_LDADD = $(LIBTIFF) $(LIBPORT) + +fax2tiff_SOURCES = fax2tiff.c +fax2tiff_LDADD = $(LIBTIFF) $(LIBPORT) + +gif2tiff_SOURCES = gif2tiff.c +gif2tiff_LDADD = $(LIBTIFF) $(LIBPORT) + +pal2rgb_SOURCES = pal2rgb.c +pal2rgb_LDADD = $(LIBTIFF) $(LIBPORT) + +ppm2tiff_SOURCES = ppm2tiff.c +ppm2tiff_LDADD = $(LIBTIFF) $(LIBPORT) + +ras2tiff_SOURCES = ras2tiff.c rasterfile.h +ras2tiff_LDADD = $(LIBTIFF) $(LIBPORT) + +raw2tiff_SOURCES = raw2tiff.c +raw2tiff_LDADD = $(LIBTIFF) $(LIBPORT) + +rgb2ycbcr_SOURCES = rgb2ycbcr.c +rgb2ycbcr_LDADD = $(LIBTIFF) $(LIBPORT) + +thumbnail_SOURCES = thumbnail.c +thumbnail_LDADD = $(LIBTIFF) $(LIBPORT) + +tiff2bw_SOURCES = tiff2bw.c +tiff2bw_LDADD = $(LIBTIFF) $(LIBPORT) + +tiff2pdf_SOURCES = tiff2pdf.c +tiff2pdf_LDADD = $(LIBTIFF) $(LIBPORT) + +tiff2ps_SOURCES = tiff2ps.c +tiff2ps_LDADD = $(LIBTIFF) $(LIBPORT) + +tiff2rgba_SOURCES = tiff2rgba.c +tiff2rgba_LDADD = $(LIBTIFF) $(LIBPORT) + +tiffcmp_SOURCES = tiffcmp.c +tiffcmp_LDADD = $(LIBTIFF) $(LIBPORT) + +tiffcp_SOURCES = tiffcp.c +tiffcp_LDADD = $(LIBTIFF) $(LIBPORT) + +tiffcrop_SOURCES = tiffcrop.c +tiffcrop_LDADD = $(LIBTIFF) $(LIBPORT) + +tiffdither_SOURCES = tiffdither.c +tiffdither_LDADD = $(LIBTIFF) $(LIBPORT) + +tiffdump_SOURCES = tiffdump.c +tiffdump_LDADD = $(LIBTIFF) $(LIBPORT) + +tiffinfo_SOURCES = tiffinfo.c +tiffinfo_LDADD = $(LIBTIFF) $(LIBPORT) + +tiffmedian_SOURCES = tiffmedian.c +tiffmedian_LDADD = $(LIBTIFF) $(LIBPORT) + +tiffset_SOURCES = tiffset.c +tiffset_LDADD = $(LIBTIFF) $(LIBPORT) + +tiffsplit_SOURCES = tiffsplit.c +tiffsplit_LDADD = $(LIBTIFF) $(LIBPORT) + +tiffgt_SOURCES = tiffgt.c +tiffgt_CFLAGS = $(CFLAGS) $(GLUT_CFLAGS) $(AM_CFLAGS) +tiffgt_LDADD = $(LIBTIFF) $(LIBPORT) $(X_LIBS) $(GLUT_LIBS) + +AM_CPPFLAGS = -I$(top_srcdir)/libtiff + +echo: + (echo $(CFLAGS)) + (echo $(tiffgt_CFLAGS)) + (echo $(GL_CFLAGS)) + (echo $(GLU_CFLAGS)) + (echo $(GLUT_CFLAGS)) diff --git a/src/SDL2/external/tiff-4.0.3/tools/Makefile.in b/src/SDL2/external/tiff-4.0.3/tools/Makefile.in new file mode 100644 index 000000000..b49b1f15a --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/Makefile.in @@ -0,0 +1,923 @@ +# Makefile.in generated by automake 1.12.4 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Tag Image File Format (TIFF) Software +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. + +# Process this file with automake to produce Makefile.in. + +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +bin_PROGRAMS = bmp2tiff$(EXEEXT) fax2ps$(EXEEXT) fax2tiff$(EXEEXT) \ + gif2tiff$(EXEEXT) pal2rgb$(EXEEXT) ppm2tiff$(EXEEXT) \ + ras2tiff$(EXEEXT) raw2tiff$(EXEEXT) rgb2ycbcr$(EXEEXT) \ + thumbnail$(EXEEXT) tiff2bw$(EXEEXT) tiff2pdf$(EXEEXT) \ + tiff2ps$(EXEEXT) tiff2rgba$(EXEEXT) tiffcmp$(EXEEXT) \ + tiffcp$(EXEEXT) tiffcrop$(EXEEXT) tiffdither$(EXEEXT) \ + tiffdump$(EXEEXT) tiffinfo$(EXEEXT) tiffmedian$(EXEEXT) \ + tiffset$(EXEEXT) tiffsplit$(EXEEXT) $(am__EXEEXT_1) +@HAVE_OPENGL_TRUE@am__append_1 = tiffgt +EXTRA_PROGRAMS = sgi2tiff$(EXEEXT) sgisv$(EXEEXT) ycbcr$(EXEEXT) +subdir = tools +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp \ + $(top_srcdir)/config/mkinstalldirs +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/libtiff/tif_config.h \ + $(top_builddir)/libtiff/tiffconf.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +@HAVE_OPENGL_TRUE@am__EXEEXT_1 = tiffgt$(EXEEXT) +am__installdirs = "$(DESTDIR)$(bindir)" +PROGRAMS = $(bin_PROGRAMS) +am_bmp2tiff_OBJECTS = bmp2tiff.$(OBJEXT) +bmp2tiff_OBJECTS = $(am_bmp2tiff_OBJECTS) +bmp2tiff_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +am_fax2ps_OBJECTS = fax2ps.$(OBJEXT) +fax2ps_OBJECTS = $(am_fax2ps_OBJECTS) +fax2ps_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_fax2tiff_OBJECTS = fax2tiff.$(OBJEXT) +fax2tiff_OBJECTS = $(am_fax2tiff_OBJECTS) +fax2tiff_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_gif2tiff_OBJECTS = gif2tiff.$(OBJEXT) +gif2tiff_OBJECTS = $(am_gif2tiff_OBJECTS) +gif2tiff_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_pal2rgb_OBJECTS = pal2rgb.$(OBJEXT) +pal2rgb_OBJECTS = $(am_pal2rgb_OBJECTS) +pal2rgb_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_ppm2tiff_OBJECTS = ppm2tiff.$(OBJEXT) +ppm2tiff_OBJECTS = $(am_ppm2tiff_OBJECTS) +ppm2tiff_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_ras2tiff_OBJECTS = ras2tiff.$(OBJEXT) +ras2tiff_OBJECTS = $(am_ras2tiff_OBJECTS) +ras2tiff_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_raw2tiff_OBJECTS = raw2tiff.$(OBJEXT) +raw2tiff_OBJECTS = $(am_raw2tiff_OBJECTS) +raw2tiff_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_rgb2ycbcr_OBJECTS = rgb2ycbcr.$(OBJEXT) +rgb2ycbcr_OBJECTS = $(am_rgb2ycbcr_OBJECTS) +rgb2ycbcr_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +sgi2tiff_SOURCES = sgi2tiff.c +sgi2tiff_OBJECTS = sgi2tiff.$(OBJEXT) +sgi2tiff_LDADD = $(LDADD) +sgisv_SOURCES = sgisv.c +sgisv_OBJECTS = sgisv.$(OBJEXT) +sgisv_LDADD = $(LDADD) +am_thumbnail_OBJECTS = thumbnail.$(OBJEXT) +thumbnail_OBJECTS = $(am_thumbnail_OBJECTS) +thumbnail_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiff2bw_OBJECTS = tiff2bw.$(OBJEXT) +tiff2bw_OBJECTS = $(am_tiff2bw_OBJECTS) +tiff2bw_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiff2pdf_OBJECTS = tiff2pdf.$(OBJEXT) +tiff2pdf_OBJECTS = $(am_tiff2pdf_OBJECTS) +tiff2pdf_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiff2ps_OBJECTS = tiff2ps.$(OBJEXT) +tiff2ps_OBJECTS = $(am_tiff2ps_OBJECTS) +tiff2ps_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiff2rgba_OBJECTS = tiff2rgba.$(OBJEXT) +tiff2rgba_OBJECTS = $(am_tiff2rgba_OBJECTS) +tiff2rgba_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiffcmp_OBJECTS = tiffcmp.$(OBJEXT) +tiffcmp_OBJECTS = $(am_tiffcmp_OBJECTS) +tiffcmp_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiffcp_OBJECTS = tiffcp.$(OBJEXT) +tiffcp_OBJECTS = $(am_tiffcp_OBJECTS) +tiffcp_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiffcrop_OBJECTS = tiffcrop.$(OBJEXT) +tiffcrop_OBJECTS = $(am_tiffcrop_OBJECTS) +tiffcrop_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiffdither_OBJECTS = tiffdither.$(OBJEXT) +tiffdither_OBJECTS = $(am_tiffdither_OBJECTS) +tiffdither_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiffdump_OBJECTS = tiffdump.$(OBJEXT) +tiffdump_OBJECTS = $(am_tiffdump_OBJECTS) +tiffdump_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiffgt_OBJECTS = tiffgt-tiffgt.$(OBJEXT) +tiffgt_OBJECTS = $(am_tiffgt_OBJECTS) +am__DEPENDENCIES_1 = +tiffgt_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) +tiffgt_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(tiffgt_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +am_tiffinfo_OBJECTS = tiffinfo.$(OBJEXT) +tiffinfo_OBJECTS = $(am_tiffinfo_OBJECTS) +tiffinfo_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiffmedian_OBJECTS = tiffmedian.$(OBJEXT) +tiffmedian_OBJECTS = $(am_tiffmedian_OBJECTS) +tiffmedian_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiffset_OBJECTS = tiffset.$(OBJEXT) +tiffset_OBJECTS = $(am_tiffset_OBJECTS) +tiffset_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +am_tiffsplit_OBJECTS = tiffsplit.$(OBJEXT) +tiffsplit_OBJECTS = $(am_tiffsplit_OBJECTS) +tiffsplit_DEPENDENCIES = $(LIBTIFF) $(LIBPORT) +ycbcr_SOURCES = ycbcr.c +ycbcr_OBJECTS = ycbcr.$(OBJEXT) +ycbcr_LDADD = $(LDADD) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/libtiff +depcomp = $(SHELL) $(top_srcdir)/config/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(bmp2tiff_SOURCES) $(fax2ps_SOURCES) $(fax2tiff_SOURCES) \ + $(gif2tiff_SOURCES) $(pal2rgb_SOURCES) $(ppm2tiff_SOURCES) \ + $(ras2tiff_SOURCES) $(raw2tiff_SOURCES) $(rgb2ycbcr_SOURCES) \ + sgi2tiff.c sgisv.c $(thumbnail_SOURCES) $(tiff2bw_SOURCES) \ + $(tiff2pdf_SOURCES) $(tiff2ps_SOURCES) $(tiff2rgba_SOURCES) \ + $(tiffcmp_SOURCES) $(tiffcp_SOURCES) $(tiffcrop_SOURCES) \ + $(tiffdither_SOURCES) $(tiffdump_SOURCES) $(tiffgt_SOURCES) \ + $(tiffinfo_SOURCES) $(tiffmedian_SOURCES) $(tiffset_SOURCES) \ + $(tiffsplit_SOURCES) ycbcr.c +DIST_SOURCES = $(bmp2tiff_SOURCES) $(fax2ps_SOURCES) \ + $(fax2tiff_SOURCES) $(gif2tiff_SOURCES) $(pal2rgb_SOURCES) \ + $(ppm2tiff_SOURCES) $(ras2tiff_SOURCES) $(raw2tiff_SOURCES) \ + $(rgb2ycbcr_SOURCES) sgi2tiff.c sgisv.c $(thumbnail_SOURCES) \ + $(tiff2bw_SOURCES) $(tiff2pdf_SOURCES) $(tiff2ps_SOURCES) \ + $(tiff2rgba_SOURCES) $(tiffcmp_SOURCES) $(tiffcp_SOURCES) \ + $(tiffcrop_SOURCES) $(tiffdither_SOURCES) $(tiffdump_SOURCES) \ + $(tiffgt_SOURCES) $(tiffinfo_SOURCES) $(tiffmedian_SOURCES) \ + $(tiffset_SOURCES) $(tiffsplit_SOURCES) ycbcr.c +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GLUT_CFLAGS = @GLUT_CFLAGS@ +GLUT_LIBS = @GLUT_LIBS@ +GLU_CFLAGS = @GLU_CFLAGS@ +GLU_LIBS = @GLU_LIBS@ +GL_CFLAGS = @GL_CFLAGS@ +GL_LIBS = @GL_LIBS@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBDIR = @LIBDIR@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTIFF_ALPHA_VERSION = @LIBTIFF_ALPHA_VERSION@ +LIBTIFF_DOCDIR = @LIBTIFF_DOCDIR@ +LIBTIFF_MAJOR_VERSION = @LIBTIFF_MAJOR_VERSION@ +LIBTIFF_MICRO_VERSION = @LIBTIFF_MICRO_VERSION@ +LIBTIFF_MINOR_VERSION = @LIBTIFF_MINOR_VERSION@ +LIBTIFF_RELEASE_DATE = @LIBTIFF_RELEASE_DATE@ +LIBTIFF_VERSION = @LIBTIFF_VERSION@ +LIBTIFF_VERSION_INFO = @LIBTIFF_VERSION_INFO@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +tiff_libs_private = @tiff_libs_private@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +LIBPORT = $(top_builddir)/port/libport.la +LIBTIFF = $(top_builddir)/libtiff/libtiff.la +EXTRA_DIST = Makefile.vc +@HAVE_RPATH_TRUE@AM_LDFLAGS = $(LIBDIR) +bmp2tiff_SOURCES = bmp2tiff.c +bmp2tiff_LDADD = $(LIBTIFF) $(LIBPORT) +fax2ps_SOURCES = fax2ps.c +fax2ps_LDADD = $(LIBTIFF) $(LIBPORT) +fax2tiff_SOURCES = fax2tiff.c +fax2tiff_LDADD = $(LIBTIFF) $(LIBPORT) +gif2tiff_SOURCES = gif2tiff.c +gif2tiff_LDADD = $(LIBTIFF) $(LIBPORT) +pal2rgb_SOURCES = pal2rgb.c +pal2rgb_LDADD = $(LIBTIFF) $(LIBPORT) +ppm2tiff_SOURCES = ppm2tiff.c +ppm2tiff_LDADD = $(LIBTIFF) $(LIBPORT) +ras2tiff_SOURCES = ras2tiff.c rasterfile.h +ras2tiff_LDADD = $(LIBTIFF) $(LIBPORT) +raw2tiff_SOURCES = raw2tiff.c +raw2tiff_LDADD = $(LIBTIFF) $(LIBPORT) +rgb2ycbcr_SOURCES = rgb2ycbcr.c +rgb2ycbcr_LDADD = $(LIBTIFF) $(LIBPORT) +thumbnail_SOURCES = thumbnail.c +thumbnail_LDADD = $(LIBTIFF) $(LIBPORT) +tiff2bw_SOURCES = tiff2bw.c +tiff2bw_LDADD = $(LIBTIFF) $(LIBPORT) +tiff2pdf_SOURCES = tiff2pdf.c +tiff2pdf_LDADD = $(LIBTIFF) $(LIBPORT) +tiff2ps_SOURCES = tiff2ps.c +tiff2ps_LDADD = $(LIBTIFF) $(LIBPORT) +tiff2rgba_SOURCES = tiff2rgba.c +tiff2rgba_LDADD = $(LIBTIFF) $(LIBPORT) +tiffcmp_SOURCES = tiffcmp.c +tiffcmp_LDADD = $(LIBTIFF) $(LIBPORT) +tiffcp_SOURCES = tiffcp.c +tiffcp_LDADD = $(LIBTIFF) $(LIBPORT) +tiffcrop_SOURCES = tiffcrop.c +tiffcrop_LDADD = $(LIBTIFF) $(LIBPORT) +tiffdither_SOURCES = tiffdither.c +tiffdither_LDADD = $(LIBTIFF) $(LIBPORT) +tiffdump_SOURCES = tiffdump.c +tiffdump_LDADD = $(LIBTIFF) $(LIBPORT) +tiffinfo_SOURCES = tiffinfo.c +tiffinfo_LDADD = $(LIBTIFF) $(LIBPORT) +tiffmedian_SOURCES = tiffmedian.c +tiffmedian_LDADD = $(LIBTIFF) $(LIBPORT) +tiffset_SOURCES = tiffset.c +tiffset_LDADD = $(LIBTIFF) $(LIBPORT) +tiffsplit_SOURCES = tiffsplit.c +tiffsplit_LDADD = $(LIBTIFF) $(LIBPORT) +tiffgt_SOURCES = tiffgt.c +tiffgt_CFLAGS = $(CFLAGS) $(GLUT_CFLAGS) $(AM_CFLAGS) +tiffgt_LDADD = $(LIBTIFF) $(LIBPORT) $(X_LIBS) $(GLUT_LIBS) +AM_CPPFLAGS = -I$(top_srcdir)/libtiff +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign tools/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +bmp2tiff$(EXEEXT): $(bmp2tiff_OBJECTS) $(bmp2tiff_DEPENDENCIES) $(EXTRA_bmp2tiff_DEPENDENCIES) + @rm -f bmp2tiff$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(bmp2tiff_OBJECTS) $(bmp2tiff_LDADD) $(LIBS) +fax2ps$(EXEEXT): $(fax2ps_OBJECTS) $(fax2ps_DEPENDENCIES) $(EXTRA_fax2ps_DEPENDENCIES) + @rm -f fax2ps$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(fax2ps_OBJECTS) $(fax2ps_LDADD) $(LIBS) +fax2tiff$(EXEEXT): $(fax2tiff_OBJECTS) $(fax2tiff_DEPENDENCIES) $(EXTRA_fax2tiff_DEPENDENCIES) + @rm -f fax2tiff$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(fax2tiff_OBJECTS) $(fax2tiff_LDADD) $(LIBS) +gif2tiff$(EXEEXT): $(gif2tiff_OBJECTS) $(gif2tiff_DEPENDENCIES) $(EXTRA_gif2tiff_DEPENDENCIES) + @rm -f gif2tiff$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(gif2tiff_OBJECTS) $(gif2tiff_LDADD) $(LIBS) +pal2rgb$(EXEEXT): $(pal2rgb_OBJECTS) $(pal2rgb_DEPENDENCIES) $(EXTRA_pal2rgb_DEPENDENCIES) + @rm -f pal2rgb$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pal2rgb_OBJECTS) $(pal2rgb_LDADD) $(LIBS) +ppm2tiff$(EXEEXT): $(ppm2tiff_OBJECTS) $(ppm2tiff_DEPENDENCIES) $(EXTRA_ppm2tiff_DEPENDENCIES) + @rm -f ppm2tiff$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(ppm2tiff_OBJECTS) $(ppm2tiff_LDADD) $(LIBS) +ras2tiff$(EXEEXT): $(ras2tiff_OBJECTS) $(ras2tiff_DEPENDENCIES) $(EXTRA_ras2tiff_DEPENDENCIES) + @rm -f ras2tiff$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(ras2tiff_OBJECTS) $(ras2tiff_LDADD) $(LIBS) +raw2tiff$(EXEEXT): $(raw2tiff_OBJECTS) $(raw2tiff_DEPENDENCIES) $(EXTRA_raw2tiff_DEPENDENCIES) + @rm -f raw2tiff$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(raw2tiff_OBJECTS) $(raw2tiff_LDADD) $(LIBS) +rgb2ycbcr$(EXEEXT): $(rgb2ycbcr_OBJECTS) $(rgb2ycbcr_DEPENDENCIES) $(EXTRA_rgb2ycbcr_DEPENDENCIES) + @rm -f rgb2ycbcr$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(rgb2ycbcr_OBJECTS) $(rgb2ycbcr_LDADD) $(LIBS) +sgi2tiff$(EXEEXT): $(sgi2tiff_OBJECTS) $(sgi2tiff_DEPENDENCIES) $(EXTRA_sgi2tiff_DEPENDENCIES) + @rm -f sgi2tiff$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(sgi2tiff_OBJECTS) $(sgi2tiff_LDADD) $(LIBS) +sgisv$(EXEEXT): $(sgisv_OBJECTS) $(sgisv_DEPENDENCIES) $(EXTRA_sgisv_DEPENDENCIES) + @rm -f sgisv$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(sgisv_OBJECTS) $(sgisv_LDADD) $(LIBS) +thumbnail$(EXEEXT): $(thumbnail_OBJECTS) $(thumbnail_DEPENDENCIES) $(EXTRA_thumbnail_DEPENDENCIES) + @rm -f thumbnail$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(thumbnail_OBJECTS) $(thumbnail_LDADD) $(LIBS) +tiff2bw$(EXEEXT): $(tiff2bw_OBJECTS) $(tiff2bw_DEPENDENCIES) $(EXTRA_tiff2bw_DEPENDENCIES) + @rm -f tiff2bw$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiff2bw_OBJECTS) $(tiff2bw_LDADD) $(LIBS) +tiff2pdf$(EXEEXT): $(tiff2pdf_OBJECTS) $(tiff2pdf_DEPENDENCIES) $(EXTRA_tiff2pdf_DEPENDENCIES) + @rm -f tiff2pdf$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiff2pdf_OBJECTS) $(tiff2pdf_LDADD) $(LIBS) +tiff2ps$(EXEEXT): $(tiff2ps_OBJECTS) $(tiff2ps_DEPENDENCIES) $(EXTRA_tiff2ps_DEPENDENCIES) + @rm -f tiff2ps$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiff2ps_OBJECTS) $(tiff2ps_LDADD) $(LIBS) +tiff2rgba$(EXEEXT): $(tiff2rgba_OBJECTS) $(tiff2rgba_DEPENDENCIES) $(EXTRA_tiff2rgba_DEPENDENCIES) + @rm -f tiff2rgba$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiff2rgba_OBJECTS) $(tiff2rgba_LDADD) $(LIBS) +tiffcmp$(EXEEXT): $(tiffcmp_OBJECTS) $(tiffcmp_DEPENDENCIES) $(EXTRA_tiffcmp_DEPENDENCIES) + @rm -f tiffcmp$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiffcmp_OBJECTS) $(tiffcmp_LDADD) $(LIBS) +tiffcp$(EXEEXT): $(tiffcp_OBJECTS) $(tiffcp_DEPENDENCIES) $(EXTRA_tiffcp_DEPENDENCIES) + @rm -f tiffcp$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiffcp_OBJECTS) $(tiffcp_LDADD) $(LIBS) +tiffcrop$(EXEEXT): $(tiffcrop_OBJECTS) $(tiffcrop_DEPENDENCIES) $(EXTRA_tiffcrop_DEPENDENCIES) + @rm -f tiffcrop$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiffcrop_OBJECTS) $(tiffcrop_LDADD) $(LIBS) +tiffdither$(EXEEXT): $(tiffdither_OBJECTS) $(tiffdither_DEPENDENCIES) $(EXTRA_tiffdither_DEPENDENCIES) + @rm -f tiffdither$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiffdither_OBJECTS) $(tiffdither_LDADD) $(LIBS) +tiffdump$(EXEEXT): $(tiffdump_OBJECTS) $(tiffdump_DEPENDENCIES) $(EXTRA_tiffdump_DEPENDENCIES) + @rm -f tiffdump$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiffdump_OBJECTS) $(tiffdump_LDADD) $(LIBS) +tiffgt$(EXEEXT): $(tiffgt_OBJECTS) $(tiffgt_DEPENDENCIES) $(EXTRA_tiffgt_DEPENDENCIES) + @rm -f tiffgt$(EXEEXT) + $(AM_V_CCLD)$(tiffgt_LINK) $(tiffgt_OBJECTS) $(tiffgt_LDADD) $(LIBS) +tiffinfo$(EXEEXT): $(tiffinfo_OBJECTS) $(tiffinfo_DEPENDENCIES) $(EXTRA_tiffinfo_DEPENDENCIES) + @rm -f tiffinfo$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiffinfo_OBJECTS) $(tiffinfo_LDADD) $(LIBS) +tiffmedian$(EXEEXT): $(tiffmedian_OBJECTS) $(tiffmedian_DEPENDENCIES) $(EXTRA_tiffmedian_DEPENDENCIES) + @rm -f tiffmedian$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiffmedian_OBJECTS) $(tiffmedian_LDADD) $(LIBS) +tiffset$(EXEEXT): $(tiffset_OBJECTS) $(tiffset_DEPENDENCIES) $(EXTRA_tiffset_DEPENDENCIES) + @rm -f tiffset$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiffset_OBJECTS) $(tiffset_LDADD) $(LIBS) +tiffsplit$(EXEEXT): $(tiffsplit_OBJECTS) $(tiffsplit_DEPENDENCIES) $(EXTRA_tiffsplit_DEPENDENCIES) + @rm -f tiffsplit$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(tiffsplit_OBJECTS) $(tiffsplit_LDADD) $(LIBS) +ycbcr$(EXEEXT): $(ycbcr_OBJECTS) $(ycbcr_DEPENDENCIES) $(EXTRA_ycbcr_DEPENDENCIES) + @rm -f ycbcr$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(ycbcr_OBJECTS) $(ycbcr_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bmp2tiff.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fax2ps.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fax2tiff.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gif2tiff.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pal2rgb.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ppm2tiff.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ras2tiff.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/raw2tiff.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rgb2ycbcr.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sgi2tiff.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sgisv.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/thumbnail.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiff2bw.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiff2pdf.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiff2ps.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiff2rgba.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiffcmp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiffcp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiffcrop.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiffdither.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiffdump.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiffgt-tiffgt.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiffinfo.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiffmedian.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiffset.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tiffsplit.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ycbcr.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +tiffgt-tiffgt.o: tiffgt.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(tiffgt_CFLAGS) $(CFLAGS) -MT tiffgt-tiffgt.o -MD -MP -MF $(DEPDIR)/tiffgt-tiffgt.Tpo -c -o tiffgt-tiffgt.o `test -f 'tiffgt.c' || echo '$(srcdir)/'`tiffgt.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/tiffgt-tiffgt.Tpo $(DEPDIR)/tiffgt-tiffgt.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='tiffgt.c' object='tiffgt-tiffgt.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(tiffgt_CFLAGS) $(CFLAGS) -c -o tiffgt-tiffgt.o `test -f 'tiffgt.c' || echo '$(srcdir)/'`tiffgt.c + +tiffgt-tiffgt.obj: tiffgt.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(tiffgt_CFLAGS) $(CFLAGS) -MT tiffgt-tiffgt.obj -MD -MP -MF $(DEPDIR)/tiffgt-tiffgt.Tpo -c -o tiffgt-tiffgt.obj `if test -f 'tiffgt.c'; then $(CYGPATH_W) 'tiffgt.c'; else $(CYGPATH_W) '$(srcdir)/tiffgt.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/tiffgt-tiffgt.Tpo $(DEPDIR)/tiffgt-tiffgt.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='tiffgt.c' object='tiffgt-tiffgt.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(tiffgt_CFLAGS) $(CFLAGS) -c -o tiffgt-tiffgt.obj `if test -f 'tiffgt.c'; then $(CYGPATH_W) 'tiffgt.c'; else $(CYGPATH_W) '$(srcdir)/tiffgt.c'; fi` + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) +installdirs: + for dir in "$(DESTDIR)$(bindir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ + clean-generic clean-libtool cscopelist ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-binPROGRAMS install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-binPROGRAMS + + +echo: + (echo $(CFLAGS)) + (echo $(tiffgt_CFLAGS)) + (echo $(GL_CFLAGS)) + (echo $(GLU_CFLAGS)) + (echo $(GLUT_CFLAGS)) + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/SDL2/external/tiff-4.0.3/tools/Makefile.vc b/src/SDL2/external/tiff-4.0.3/tools/Makefile.vc new file mode 100644 index 000000000..c8d69cddf --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/Makefile.vc @@ -0,0 +1,52 @@ +# $Id: Makefile.vc,v 1.15 2009-01-22 20:53:07 fwarmerdam Exp $ +# +# Copyright (C) 2004, Andrey Kiselev +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. +# +# Makefile for MS Visual C and Watcom C compilers. +# +# To build: +# C:\libtiff\tools> nmake /f makefile.vc + +!INCLUDE ..\nmake.opt + +TARGETS = bmp2tiff.exe tiffinfo.exe tiffdump.exe fax2tiff.exe \ + fax2ps.exe gif2tiff.exe pal2rgb.exe ppm2tiff.exe \ + rgb2ycbcr.exe thumbnail.exe ras2tiff.exe raw2tiff.exe \ + tiff2bw.exe tiff2rgba.exe tiff2pdf.exe tiff2ps.exe \ + tiffcmp.exe tiffcp.exe tiffcrop.exe tiffdither.exe \ + tiffmedian.exe tiffset.exe tiffsplit.exe + +INCL = -I..\libtiff -I..\port -DNEED_LIBPORT +LIBS = $(LIBS) ..\port\libport.lib ..\libtiff\libtiff.lib + +default: $(TARGETS) + +.c.exe: + $(CC) $(CFLAGS) $*.c $(EXTRA_OBJ) $(LIBS) + +tiffgt.exe: + $(CC) $(CFLAGS) tiffgt.c $(EXTRA_OBJ) $(LIBS) + +clean: + -del *.exe + -del *.exe.manifest + -del *.obj diff --git a/src/SDL2/external/tiff-4.0.3/tools/bmp2tiff.c b/src/SDL2/external/tiff-4.0.3/tools/bmp2tiff.c new file mode 100644 index 000000000..c66a8d217 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/bmp2tiff.c @@ -0,0 +1,854 @@ +/* $Id: bmp2tiff.c,v 1.23 2010-03-10 18:56:49 bfriesen Exp $ + * + * Project: libtiff tools + * Purpose: Convert Windows BMP files in TIFF. + * Author: Andrey Kiselev, dron@ak4719.spb.edu + * + ****************************************************************************** + * Copyright (c) 2004, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#if HAVE_FCNTL_H +# include +#endif + +#if HAVE_SYS_TYPES_H +# include +#endif + +#if HAVE_IO_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +#ifndef O_BINARY +# define O_BINARY 0 +#endif + +enum BMPType +{ + BMPT_WIN4, /* BMP used in Windows 3.0/NT 3.51/95 */ + BMPT_WIN5, /* BMP used in Windows NT 4.0/98/Me/2000/XP */ + BMPT_OS21, /* BMP used in OS/2 PM 1.x */ + BMPT_OS22 /* BMP used in OS/2 PM 2.x */ +}; + +/* + * Bitmap file consists of a BMPFileHeader structure followed by a + * BMPInfoHeader structure. An array of BMPColorEntry structures (also called + * a colour table) follows the bitmap information header structure. The colour + * table is followed by a second array of indexes into the colour table (the + * actual bitmap data). Data may be comressed, for 4-bpp and 8-bpp used RLE + * compression. + * + * +---------------------+ + * | BMPFileHeader | + * +---------------------+ + * | BMPInfoHeader | + * +---------------------+ + * | BMPColorEntry array | + * +---------------------+ + * | Colour-index array | + * +---------------------+ + * + * All numbers stored in Intel order with least significant byte first. + */ + +enum BMPComprMethod +{ + BMPC_RGB = 0L, /* Uncompressed */ + BMPC_RLE8 = 1L, /* RLE for 8 bpp images */ + BMPC_RLE4 = 2L, /* RLE for 4 bpp images */ + BMPC_BITFIELDS = 3L, /* Bitmap is not compressed and the colour table + * consists of three DWORD color masks that specify + * the red, green, and blue components of each + * pixel. This is valid when used with + * 16- and 32-bpp bitmaps. */ + BMPC_JPEG = 4L, /* Indicates that the image is a JPEG image. */ + BMPC_PNG = 5L /* Indicates that the image is a PNG image. */ +}; + +enum BMPLCSType /* Type of logical color space. */ +{ + BMPLT_CALIBRATED_RGB = 0, /* This value indicates that endpoints and + * gamma values are given in the appropriate + * fields. */ + BMPLT_DEVICE_RGB = 1, + BMPLT_DEVICE_CMYK = 2 +}; + +typedef struct +{ + int32 iCIEX; + int32 iCIEY; + int32 iCIEZ; +} BMPCIEXYZ; + +typedef struct /* This structure contains the x, y, and z */ +{ /* coordinates of the three colors that */ + /* correspond */ + BMPCIEXYZ iCIERed; /* to the red, green, and blue endpoints for */ + BMPCIEXYZ iCIEGreen; /* a specified logical color space. */ + BMPCIEXYZ iCIEBlue; +} BMPCIEXYZTriple; + +typedef struct +{ + char bType[2]; /* Signature "BM" */ + uint32 iSize; /* Size in bytes of the bitmap file. Should + * always be ignored while reading because + * of error in Windows 3.0 SDK's description + * of this field */ + uint16 iReserved1; /* Reserved, set as 0 */ + uint16 iReserved2; /* Reserved, set as 0 */ + uint32 iOffBits; /* Offset of the image from file start in bytes */ +} BMPFileHeader; + +/* File header size in bytes: */ +const int BFH_SIZE = 14; + +typedef struct +{ + uint32 iSize; /* Size of BMPInfoHeader structure in bytes. + * Should be used to determine start of the + * colour table */ + int32 iWidth; /* Image width */ + int32 iHeight; /* Image height. If positive, image has bottom + * left origin, if negative --- top left. */ + int16 iPlanes; /* Number of image planes (must be set to 1) */ + int16 iBitCount; /* Number of bits per pixel (1, 4, 8, 16, 24 + * or 32). If 0 then the number of bits per + * pixel is specified or is implied by the + * JPEG or PNG format. */ + uint32 iCompression; /* Compression method */ + uint32 iSizeImage; /* Size of uncomressed image in bytes. May + * be 0 for BMPC_RGB bitmaps. If iCompression + * is BI_JPEG or BI_PNG, iSizeImage indicates + * the size of the JPEG or PNG image buffer. */ + int32 iXPelsPerMeter; /* X resolution, pixels per meter (0 if not used) */ + int32 iYPelsPerMeter; /* Y resolution, pixels per meter (0 if not used) */ + uint32 iClrUsed; /* Size of colour table. If 0, iBitCount should + * be used to calculate this value + * (1< 0) ? info_hdr.iHeight : -info_hdr.iHeight; + + switch (info_hdr.iBitCount) + { + case 1: + case 4: + case 8: + nbands = 1; + depth = info_hdr.iBitCount; + photometric = PHOTOMETRIC_PALETTE; + /* Allocate memory for colour table and read it. */ + if (info_hdr.iClrUsed) + clr_tbl_size = + ((uint32)(1< 0) + offset = file_hdr.iOffBits+(length-row-1)*size; + else + offset = file_hdr.iOffBits + row * size; + if (lseek(fd, offset, SEEK_SET) == (off_t)-1) { + TIFFError(infilename, + "scanline %lu: Seek error", + (unsigned long) row); + break; + } + + if (read(fd, scanbuf, size) < 0) { + TIFFError(infilename, + "scanline %lu: Read error", + (unsigned long) row); + break; + } + + rearrangePixels(scanbuf, width, info_hdr.iBitCount); + + if (TIFFWriteScanline(out, scanbuf, row, 0)<0) { + TIFFError(infilename, + "scanline %lu: Write error", + (unsigned long) row); + break; + } + } + + _TIFFfree(scanbuf); + +/* -------------------------------------------------------------------- */ +/* Read compressed image data. */ +/* -------------------------------------------------------------------- */ + + } else if ( info_hdr.iCompression == BMPC_RLE8 + || info_hdr.iCompression == BMPC_RLE4 ) { + uint32 i, j, k, runlength; + uint32 compr_size, uncompr_size; + unsigned char *comprbuf; + unsigned char *uncomprbuf; + + compr_size = file_hdr.iSize - file_hdr.iOffBits; + uncompr_size = width * length; + comprbuf = (unsigned char *) _TIFFmalloc( compr_size ); + if (!comprbuf) { + TIFFError(infilename, + "Can't allocate space for compressed scanline buffer"); + goto bad3; + } + uncomprbuf = (unsigned char *)_TIFFmalloc(uncompr_size); + if (!uncomprbuf) { + TIFFError(infilename, + "Can't allocate space for uncompressed scanline buffer"); + goto bad3; + } + + lseek(fd, file_hdr.iOffBits, SEEK_SET); + read(fd, comprbuf, compr_size); + i = 0; + j = 0; + if (info_hdr.iBitCount == 8) { /* RLE8 */ + while(j < uncompr_size && i < compr_size) { + if ( comprbuf[i] ) { + runlength = comprbuf[i++]; + while( runlength > 0 + && j < uncompr_size + && i < compr_size ) { + uncomprbuf[j++] = comprbuf[i]; + runlength--; + } + i++; + } else { + i++; + if (comprbuf[i] == 0) /* Next scanline */ + i++; + else if (comprbuf[i] == 1) /* End of image */ + break; + else if (comprbuf[i] == 2) { /* Move to... */ + i++; + if (i < compr_size - 1) { + j+=comprbuf[i]+comprbuf[i+1]*width; + i += 2; + } + else + break; + } else { /* Absolute mode */ + runlength = comprbuf[i++]; + for (k = 0; k < runlength && j < uncompr_size && i < compr_size; k++) + uncomprbuf[j++] = comprbuf[i++]; + if ( k & 0x01 ) + i++; + } + } + } + } + else { /* RLE4 */ + while( j < uncompr_size && i < compr_size ) { + if ( comprbuf[i] ) { + runlength = comprbuf[i++]; + while( runlength > 0 && j < uncompr_size && i < compr_size ) { + if ( runlength & 0x01 ) + uncomprbuf[j++] = (comprbuf[i] & 0xF0) >> 4; + else + uncomprbuf[j++] = comprbuf[i] & 0x0F; + runlength--; + } + i++; + } else { + i++; + if (comprbuf[i] == 0) /* Next scanline */ + i++; + else if (comprbuf[i] == 1) /* End of image */ + break; + else if (comprbuf[i] == 2) { /* Move to... */ + i++; + if (i < compr_size - 1) { + j+=comprbuf[i]+comprbuf[i+1]*width; + i += 2; + } + else + break; + } else { /* Absolute mode */ + runlength = comprbuf[i++]; + for (k = 0; k < runlength && j < uncompr_size && i < compr_size; k++) { + if (k & 0x01) + uncomprbuf[j++] = comprbuf[i++] & 0x0F; + else + uncomprbuf[j++] = (comprbuf[i] & 0xF0) >> 4; + } + if (k & 0x01) + i++; + } + } + } + } + + _TIFFfree(comprbuf); + + for (row = 0; row < length; row++) { + if (TIFFWriteScanline(out, + uncomprbuf + (length - row - 1) * width, + row, 0) < 0) { + TIFFError(infilename, + "scanline %lu: Write error.\n", + (unsigned long) row); + } + } + + _TIFFfree(uncomprbuf); + } + TIFFWriteDirectory(out); + if (blue_tbl) { + _TIFFfree(blue_tbl); + blue_tbl=NULL; + } + if (green_tbl) { + _TIFFfree(green_tbl); + green_tbl=NULL; + } + if (red_tbl) { + _TIFFfree(red_tbl); + red_tbl=NULL; + } + } + +bad3: + if (blue_tbl) + _TIFFfree(blue_tbl); +bad2: + if (green_tbl) + _TIFFfree(green_tbl); +bad1: + if (red_tbl) + _TIFFfree(red_tbl); +bad: + close(fd); + + if (out) + TIFFClose(out); + return 0; +} + +/* + * Image data in BMP file stored in BGR (or ABGR) format. We should rearrange + * pixels to RGB (RGBA) format. + */ +static void +rearrangePixels(char *buf, uint32 width, uint32 bit_count) +{ + char tmp; + uint32 i; + + switch(bit_count) { + case 16: /* FIXME: need a sample file */ + break; + case 24: + for (i = 0; i < width; i++, buf += 3) { + tmp = *buf; + *buf = *(buf + 2); + *(buf + 2) = tmp; + } + break; + case 32: + { + char *buf1 = buf; + + for (i = 0; i < width; i++, buf += 4) { + tmp = *buf; + *buf1++ = *(buf + 2); + *buf1++ = *(buf + 1); + *buf1++ = tmp; + } + } + break; + default: + break; + } +} + +static int +processCompressOptions(char* opt) +{ + if (strcmp(opt, "none") == 0) + compression = COMPRESSION_NONE; + else if (strcmp(opt, "packbits") == 0) + compression = COMPRESSION_PACKBITS; + else if (strncmp(opt, "jpeg", 4) == 0) { + char* cp = strchr(opt, ':'); + + compression = COMPRESSION_JPEG; + while( cp ) + { + if (isdigit((int)cp[1])) + quality = atoi(cp+1); + else if (cp[1] == 'r' ) + jpegcolormode = JPEGCOLORMODE_RAW; + else + usage(); + + cp = strchr(cp+1,':'); + } + } else if (strncmp(opt, "lzw", 3) == 0) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_LZW; + } else if (strncmp(opt, "zip", 3) == 0) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_DEFLATE; + } else + return (0); + return (1); +} + +static char* stuff[] = { +"bmp2tiff --- convert Windows BMP files to TIFF", +"usage: bmp2tiff [options] input.bmp [input2.bmp ...] output.tif", +"where options are:", +" -r # make each strip have no more than # rows", +"", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] compress output with deflate encoding", +" -c jpeg[:opts]compress output with JPEG encoding", +" -c packbits compress output with packbits encoding", +" -c none use no compression algorithm on output", +"", +"JPEG options:", +" # set compression quality level (0-100, default 75)", +" r output color image as RGB rather than YCbCr", +"For example, -c jpeg:r:50 to get JPEG-encoded RGB data with 50% comp. quality", +"", +"LZW and deflate options:", +" # set predictor value", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +" -o out.tif write output to out.tif", +" -h this help message", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/fax2ps.c b/src/SDL2/external/tiff-4.0.3/tools/fax2ps.c new file mode 100644 index 000000000..b8cdf89f6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/fax2ps.c @@ -0,0 +1,449 @@ +/* $Id: fax2ps.c,v 1.27 2011-04-02 19:30:20 bfriesen Exp $" */ + +/* + * Copyright (c) 1991-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ +#include "tif_config.h" + +#include +#include +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef HAVE_FCNTL_H +# include +#endif + +#ifdef HAVE_IO_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +float defxres = 204.; /* default x resolution (pixels/inch) */ +float defyres = 98.; /* default y resolution (lines/inch) */ +const float half = 0.5; +const float points = 72.0; +float pageWidth = 0; /* image page width (inches) */ +float pageHeight = 0; /* image page length (inches) */ +int scaleToPage = 0; /* if true, scale raster to page dimensions */ +int totalPages = 0; /* total # pages printed */ +int row; /* current output row */ +int maxline = 512; /* max output line of PostScript */ + +/* + * Turn a bit-mapped scanline into the appropriate sequence + * of PostScript characters to be rendered. + * + * Original version written by Bret D. Whissel, + * Florida State University Meteorology Department + * March 13-15, 1995. + */ +static void +printruns(unsigned char* buf, uint32* runs, uint32* erun, uint32 lastx) +{ + static struct { + char white, black; + unsigned short width; + } WBarr[] = { + { 'd', 'n', 512 }, { 'e', 'o', 256 }, { 'f', 'p', 128 }, + { 'g', 'q', 64 }, { 'h', 'r', 32 }, { 'i', 's', 16 }, + { 'j', 't', 8 }, { 'k', 'u', 4 }, { 'l', 'v', 2 }, + { 'm', 'w', 1 } + }; + static char* svalue = + " !\"#$&'*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abc"; + int colormode = 1; /* 0 for white, 1 for black */ + uint32 runlength = 0; + int n = maxline; + uint32 x = 0; + int l; + + (void) buf; + printf("%d m(", row++); + while (runs < erun) { + if (runlength <= 0) { + colormode ^= 1; + runlength = *runs++; + if (x+runlength > lastx) + runlength = runs[-1] = lastx-x; + x += runlength; + if (!colormode && runs == erun) + break; /* don't bother printing the final white run */ + } + /* + * If a runlength is greater than 6 pixels, then spit out + * black or white characters until the runlength drops to + * 6 or less. Once a runlength is <= 6, then combine black + * and white runlengths until a 6-pixel pattern is obtained. + * Then write out the special character. Six-pixel patterns + * were selected since 64 patterns is the largest power of + * two less than the 92 "easily printable" PostScript + * characters (i.e., no escape codes or octal chars). + */ + l = 0; + while (runlength > 6) { /* Run is greater than six... */ + if (runlength >= WBarr[l].width) { + if (n == 0) { + putchar('\n'); + n = maxline; + } + putchar(colormode ? WBarr[l].black : WBarr[l].white), n--; + runlength -= WBarr[l].width; + } else + l++; + } + while (runlength > 0 && runlength <= 6) { + uint32 bitsleft = 6; + int t = 0; + while (bitsleft) { + if (runlength <= bitsleft) { + if (colormode) + t |= ((1 << runlength)-1) << (bitsleft-runlength); + bitsleft -= runlength; + runlength = 0; + if (bitsleft) { + if (runs >= erun) + break; + colormode ^= 1; + runlength = *runs++; + if (x+runlength > lastx) + runlength = runs[-1] = lastx-x; + x += runlength; + } + } else { /* runlength exceeds bits left */ + if (colormode) + t |= ((1 << bitsleft)-1); + runlength -= bitsleft; + bitsleft = 0; + } + } + if (n == 0) { + putchar('\n'); + n = maxline; + } + putchar(svalue[t]), n--; + } + } + printf(")s\n"); +} + +/* + * Create a special PostScript font for printing FAX documents. By taking + * advantage of the font-cacheing mechanism, a substantial speed-up in + * rendering time is realized. + */ +static void +emitFont(FILE* fd) +{ + static const char* fontPrologue[] = { + "/newfont 10 dict def newfont begin /FontType 3 def /FontMatrix [1", + "0 0 1 0 0] def /FontBBox [0 0 512 1] def /Encoding 256 array def", + "0 1 31{Encoding exch /255 put}for 120 1 255{Encoding exch /255", + "put}for Encoding 37 /255 put Encoding 40 /255 put Encoding 41 /255", + "put Encoding 92 /255 put /count 0 def /ls{Encoding exch count 3", + "string cvs cvn put /count count 1 add def}def 32 1 36{ls}for", + "38 1 39{ls}for 42 1 91{ls}for 93 1 99{ls}for /count 100", + "def 100 1 119{ls}for /CharDict 5 dict def CharDict begin /white", + "{dup 255 eq{pop}{1 dict begin 100 sub neg 512 exch bitshift", + "/cw exch def cw 0 0 0 cw 1 setcachedevice end}ifelse}def /black", + "{dup 255 eq{pop}{1 dict begin 110 sub neg 512 exch bitshift", + "/cw exch def cw 0 0 0 cw 1 setcachedevice 0 0 moveto cw 0 rlineto", + "0 1 rlineto cw neg 0 rlineto closepath fill end}ifelse}def /numbuild", + "{dup 255 eq{pop}{6 0 0 0 6 1 setcachedevice 0 1 5{0 moveto", + "dup 32 and 32 eq{1 0 rlineto 0 1 rlineto -1 0 rlineto closepath", + "fill newpath}if 1 bitshift}for pop}ifelse}def /.notdef {}", + "def /255 {}def end /BuildChar{exch begin dup 110 ge{Encoding", + "exch get 3 string cvs cvi CharDict /black get}{dup 100 ge {Encoding", + "exch get 3 string cvs cvi CharDict /white get}{Encoding exch get", + "3 string cvs cvi CharDict /numbuild get}ifelse}ifelse exec end", + "}def end /Bitfont newfont definefont 1 scalefont setfont", + NULL + }; + int i; + for (i = 0; fontPrologue[i] != NULL; i++) + fprintf(fd, "%s\n", fontPrologue[i]); +} + +void +printTIF(TIFF* tif, uint16 pageNumber) +{ + uint32 w, h; + uint16 unit, compression; + float xres, yres, scale = 1.0; + tstrip_t s, ns; + time_t creation_time; + + TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &h); + TIFFGetField(tif, TIFFTAG_IMAGEWIDTH, &w); + if (!TIFFGetField(tif, TIFFTAG_COMPRESSION, &compression) + || compression < COMPRESSION_CCITTRLE + || compression > COMPRESSION_CCITT_T6) + return; + if (!TIFFGetField(tif, TIFFTAG_XRESOLUTION, &xres) || !xres) { + TIFFWarning(TIFFFileName(tif), + "No x-resolution, assuming %g dpi", defxres); + xres = defxres; + } + if (!TIFFGetField(tif, TIFFTAG_YRESOLUTION, &yres) || !yres) { + TIFFWarning(TIFFFileName(tif), + "No y-resolution, assuming %g lpi", defyres); + yres = defyres; /* XXX */ + } + if (TIFFGetField(tif, TIFFTAG_RESOLUTIONUNIT, &unit) && + unit == RESUNIT_CENTIMETER) { + xres *= 2.54F; + yres *= 2.54F; + } + if (pageWidth == 0) + pageWidth = w / xres; + if (pageHeight == 0) + pageHeight = h / yres; + + printf("%%!PS-Adobe-3.0\n"); + printf("%%%%Creator: fax2ps\n"); +#ifdef notdef + printf("%%%%Title: %s\n", file); +#endif + creation_time = time(0); + printf("%%%%CreationDate: %s", ctime(&creation_time)); + printf("%%%%Origin: 0 0\n"); + printf("%%%%BoundingBox: 0 0 %u %u\n", + (int)(pageWidth * points), (int)(pageHeight * points)); /* XXX */ + printf("%%%%Pages: (atend)\n"); + printf("%%%%EndComments\n"); + printf("%%%%BeginProlog\n"); + emitFont(stdout); + printf("/d{bind def}def\n"); /* bind and def proc */ + printf("/m{0 exch moveto}d\n"); + printf("/s{show}d\n"); + printf("/p{showpage}d \n"); /* end page */ + printf("%%%%EndProlog\n"); + printf("%%%%Page: \"%u\" %u\n", pageNumber, pageNumber); + printf("/$pageTop save def gsave\n"); + if (scaleToPage) + scale = pageHeight / (h/yres) < pageWidth / (w/xres) ? + pageHeight / (h/yres) : pageWidth / (w/xres); + printf("%g %g translate\n", + points * (pageWidth - scale*w/xres) * half, + points * (scale*h/yres + (pageHeight - scale*h/yres) * half)); + printf("%g %g scale\n", points/xres*scale, -points/yres*scale); + printf("0 setgray\n"); + TIFFSetField(tif, TIFFTAG_FAXFILLFUNC, printruns); + ns = TIFFNumberOfStrips(tif); + row = 0; + for (s = 0; s < ns; s++) + (void) TIFFReadEncodedStrip(tif, s, (tdata_t) NULL, (tsize_t) -1); + printf("p\n"); + printf("grestore $pageTop restore\n"); + totalPages++; +} + +#define GetPageNumber(tif) \ +TIFFGetField(tif, TIFFTAG_PAGENUMBER, &pn, &ptotal) + +int +findPage(TIFF* tif, uint16 pageNumber) +{ + uint16 pn = (uint16) -1; + uint16 ptotal = (uint16) -1; + if (GetPageNumber(tif)) { + while (pn != (pageNumber-1) && TIFFReadDirectory(tif) && GetPageNumber(tif)) + ; + return (pn == (pageNumber-1)); + } else + return (TIFFSetDirectory(tif, (tdir_t)(pageNumber-1))); +} + +void +fax2ps(TIFF* tif, uint16 npages, uint16* pages, char* filename) +{ + if (npages > 0) { + uint16 pn, ptotal; + int i; + + if (!GetPageNumber(tif)) + fprintf(stderr, "%s: No page numbers, counting directories.\n", + filename); + for (i = 0; i < npages; i++) { + if (findPage(tif, pages[i])) + printTIF(tif, pages[i]); + else + fprintf(stderr, "%s: No page number %d\n", filename, pages[i]); + } + } else { + uint16 pageNumber = 0; + do + printTIF(tif, pageNumber++); + while (TIFFReadDirectory(tif)); + } +} + +#undef GetPageNumber + +static int +pcompar(const void* va, const void* vb) +{ + const int* pa = (const int*) va; + const int* pb = (const int*) vb; + return (*pa - *pb); +} + +static void usage(int code); + +int +main(int argc, char** argv) +{ + extern int optind; + extern char* optarg; + uint16 *pages = NULL, npages = 0, pageNumber; + int c, dowarnings = 0; /* if 1, enable library warnings */ + TIFF* tif; + + while ((c = getopt(argc, argv, "l:p:x:y:W:H:wS")) != -1) + switch (c) { + case 'H': /* page height */ + pageHeight = (float)atof(optarg); + break; + case 'S': /* scale to page */ + scaleToPage = 1; + break; + case 'W': /* page width */ + pageWidth = (float)atof(optarg); + break; + case 'p': /* print specific page */ + pageNumber = (uint16)atoi(optarg); + if (pages) + pages = (uint16*) realloc(pages, (npages+1)*sizeof(uint16)); + else + pages = (uint16*) malloc(sizeof(uint16)); + pages[npages++] = pageNumber; + break; + case 'w': + dowarnings = 1; + break; + case 'x': + defxres = (float)atof(optarg); + break; + case 'y': + defyres = (float)atof(optarg); + break; + case 'l': + maxline = atoi(optarg); + break; + case '?': + usage(-1); + } + if (npages > 0) + qsort(pages, npages, sizeof(uint16), pcompar); + if (!dowarnings) + TIFFSetWarningHandler(0); + if (optind < argc) { + do { + tif = TIFFOpen(argv[optind], "r"); + if (tif) { + fax2ps(tif, npages, pages, argv[optind]); + TIFFClose(tif); + } else + fprintf(stderr, "%s: Can not open, or not a TIFF file.\n", + argv[optind]); + } while (++optind < argc); + } else { + int n; + FILE* fd; + char buf[16*1024]; + + fd = tmpfile(); + if (fd == NULL) { + fprintf(stderr, "Could not obtain temporary file.\n"); + exit(-2); + } +#if defined(HAVE_SETMODE) && defined(O_BINARY) + setmode(fileno(stdin), O_BINARY); +#endif + while ((n = read(fileno(stdin), buf, sizeof (buf))) > 0) + write(fileno(fd), buf, n); + lseek(fileno(fd), 0, SEEK_SET); +#if defined(_WIN32) && defined(USE_WIN32_FILEIO) + tif = TIFFFdOpen(_get_osfhandle(fileno(fd)), "temp", "r"); +#else + tif = TIFFFdOpen(fileno(fd), "temp", "r"); +#endif + if (tif) { + fax2ps(tif, npages, pages, ""); + TIFFClose(tif); + } else + fprintf(stderr, "Can not open, or not a TIFF file.\n"); + fclose(fd); + } + printf("%%%%Trailer\n"); + printf("%%%%Pages: %u\n", totalPages); + printf("%%%%EOF\n"); + + return (0); +} + +char* stuff[] = { +"usage: fax2ps [options] [input.tif ...]", +"where options are:", +" -w suppress warning messages", +" -l chars set maximum output line length for generated PostScript", +" -p page# select page to print (can use multiple times)", +" -x xres set default horizontal resolution of input data (dpi)", +" -y yres set default vertical resolution of input data (lpi)", +" -S scale output to page size", +" -W width set output page width (inches), default is 8.5", +" -H height set output page height (inches), default is 11", +NULL +}; + +static void +usage(int code) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(code); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/fax2tiff.c b/src/SDL2/external/tiff-4.0.3/tools/fax2tiff.c new file mode 100644 index 000000000..8881e5fc7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/fax2tiff.c @@ -0,0 +1,469 @@ +/* $Id: fax2tiff.c,v 1.22 2010-03-10 18:56:49 bfriesen Exp $ */ + +/* + * Copyright (c) 1990-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * Convert a CCITT Group 3 or 4 FAX file to TIFF Group 3 or 4 format. + */ +#include "tif_config.h" + +#include +#include /* should have atof & getopt */ + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef HAVE_FCNTL_H +# include +#endif + +#ifdef HAVE_IO_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffiop.h" + +#ifndef EXIT_SUCCESS +# define EXIT_SUCCESS 0 +#endif +#ifndef EXIT_FAILURE +# define EXIT_FAILURE 1 +#endif + +#define TIFFhowmany8(x) (((x)&0x07)?((uint32)(x)>>3)+1:(uint32)(x)>>3) + +TIFF *faxTIFF; +char *rowbuf; +char *refbuf; + +uint32 xsize = 1728; +int verbose; +int stretch; +uint16 badfaxrun; +uint32 badfaxlines; + +int copyFaxFile(TIFF* tifin, TIFF* tifout); +static void usage(void); + +int +main(int argc, char* argv[]) +{ + FILE *in; + TIFF *out = NULL; + TIFFErrorHandler whandler = NULL; + int compression_in = COMPRESSION_CCITTFAX3; + int compression_out = COMPRESSION_CCITTFAX3; + int fillorder_in = FILLORDER_LSB2MSB; + int fillorder_out = FILLORDER_LSB2MSB; + uint32 group3options_in = 0; /* 1d-encoded */ + uint32 group3options_out = 0; /* 1d-encoded */ + uint32 group4options_in = 0; /* compressed */ + uint32 group4options_out = 0; /* compressed */ + uint32 defrowsperstrip = (uint32) 0; + uint32 rowsperstrip; + int photometric_in = PHOTOMETRIC_MINISWHITE; + int photometric_out = PHOTOMETRIC_MINISWHITE; + int mode = FAXMODE_CLASSF; + int rows; + int c; + int pn, npages; + float resY = 196.0; + extern int optind; + extern char* optarg; + + + while ((c = getopt(argc, argv, "R:X:o:1234ABLMPUW5678abcflmprsuvwz?")) != -1) + switch (c) { + /* input-related options */ + case '3': /* input is g3-encoded */ + compression_in = COMPRESSION_CCITTFAX3; + break; + case '4': /* input is g4-encoded */ + compression_in = COMPRESSION_CCITTFAX4; + break; + case 'U': /* input is uncompressed (g3 and g4) */ + group3options_in |= GROUP3OPT_UNCOMPRESSED; + group4options_in |= GROUP4OPT_UNCOMPRESSED; + break; + case '1': /* input is 1d-encoded (g3 only) */ + group3options_in &= ~GROUP3OPT_2DENCODING; + break; + case '2': /* input is 2d-encoded (g3 only) */ + group3options_in |= GROUP3OPT_2DENCODING; + break; + case 'P': /* input has not-aligned EOL (g3 only) */ + group3options_in &= ~GROUP3OPT_FILLBITS; + break; + case 'A': /* input has aligned EOL (g3 only) */ + group3options_in |= GROUP3OPT_FILLBITS; + break; + case 'W': /* input has 0 mean white */ + photometric_in = PHOTOMETRIC_MINISWHITE; + break; + case 'B': /* input has 0 mean black */ + photometric_in = PHOTOMETRIC_MINISBLACK; + break; + case 'L': /* input has lsb-to-msb fillorder */ + fillorder_in = FILLORDER_LSB2MSB; + break; + case 'M': /* input has msb-to-lsb fillorder */ + fillorder_in = FILLORDER_MSB2LSB; + break; + case 'R': /* input resolution */ + resY = (float) atof(optarg); + break; + case 'X': /* input width */ + xsize = (uint32) atoi(optarg); + break; + + /* output-related options */ + case '7': /* generate g3-encoded output */ + compression_out = COMPRESSION_CCITTFAX3; + break; + case '8': /* generate g4-encoded output */ + compression_out = COMPRESSION_CCITTFAX4; + break; + case 'u': /* generate uncompressed output (g3 and g4) */ + group3options_out |= GROUP3OPT_UNCOMPRESSED; + group4options_out |= GROUP4OPT_UNCOMPRESSED; + break; + case '5': /* generate 1d-encoded output (g3 only) */ + group3options_out &= ~GROUP3OPT_2DENCODING; + break; + case '6': /* generate 2d-encoded output (g3 only) */ + group3options_out |= GROUP3OPT_2DENCODING; + break; + case 'c': /* generate "classic" g3 format */ + mode = FAXMODE_CLASSIC; + break; + case 'f': /* generate Class F format */ + mode = FAXMODE_CLASSF; + break; + case 'm': /* output's fillorder is msb-to-lsb */ + fillorder_out = FILLORDER_MSB2LSB; + break; + case 'l': /* output's fillorder is lsb-to-msb */ + fillorder_out = FILLORDER_LSB2MSB; + break; + case 'o': + out = TIFFOpen(optarg, "w"); + if (out == NULL) { + fprintf(stderr, + "%s: Can not create or open %s\n", + argv[0], optarg); + return EXIT_FAILURE; + } + break; + case 'a': /* generate EOL-aligned output (g3 only) */ + group3options_out |= GROUP3OPT_FILLBITS; + break; + case 'p': /* generate not EOL-aligned output (g3 only) */ + group3options_out &= ~GROUP3OPT_FILLBITS; + break; + case 'r': /* rows/strip */ + defrowsperstrip = atol(optarg); + break; + case 's': /* stretch image by dup'ng scanlines */ + stretch = 1; + break; + case 'w': /* undocumented -- for testing */ + photometric_out = PHOTOMETRIC_MINISWHITE; + break; + case 'b': /* undocumented -- for testing */ + photometric_out = PHOTOMETRIC_MINISBLACK; + break; + case 'z': /* undocumented -- for testing */ + compression_out = COMPRESSION_LZW; + break; + case 'v': /* -v for info */ + verbose++; + break; + case '?': + usage(); + /*NOTREACHED*/ + } + npages = argc - optind; + if (npages < 1) + usage(); + + rowbuf = _TIFFmalloc(TIFFhowmany8(xsize)); + refbuf = _TIFFmalloc(TIFFhowmany8(xsize)); + if (rowbuf == NULL || refbuf == NULL) { + fprintf(stderr, "%s: Not enough memory\n", argv[0]); + return (EXIT_FAILURE); + } + + if (out == NULL) { + out = TIFFOpen("fax.tif", "w"); + if (out == NULL) { + fprintf(stderr, "%s: Can not create fax.tif\n", + argv[0]); + return (EXIT_FAILURE); + } + } + + faxTIFF = TIFFClientOpen("(FakeInput)", "w", + /* TIFFClientOpen() fails if we don't set existing value here */ + TIFFClientdata(out), + TIFFGetReadProc(out), TIFFGetWriteProc(out), + TIFFGetSeekProc(out), TIFFGetCloseProc(out), + TIFFGetSizeProc(out), TIFFGetMapFileProc(out), + TIFFGetUnmapFileProc(out)); + if (faxTIFF == NULL) { + fprintf(stderr, "%s: Can not create fake input file\n", + argv[0]); + return (EXIT_FAILURE); + } + TIFFSetMode(faxTIFF, O_RDONLY); + TIFFSetField(faxTIFF, TIFFTAG_IMAGEWIDTH, xsize); + TIFFSetField(faxTIFF, TIFFTAG_SAMPLESPERPIXEL, 1); + TIFFSetField(faxTIFF, TIFFTAG_BITSPERSAMPLE, 1); + TIFFSetField(faxTIFF, TIFFTAG_FILLORDER, fillorder_in); + TIFFSetField(faxTIFF, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + TIFFSetField(faxTIFF, TIFFTAG_PHOTOMETRIC, photometric_in); + TIFFSetField(faxTIFF, TIFFTAG_YRESOLUTION, resY); + TIFFSetField(faxTIFF, TIFFTAG_RESOLUTIONUNIT, RESUNIT_INCH); + + /* NB: this must be done after directory info is setup */ + TIFFSetField(faxTIFF, TIFFTAG_COMPRESSION, compression_in); + if (compression_in == COMPRESSION_CCITTFAX3) + TIFFSetField(faxTIFF, TIFFTAG_GROUP3OPTIONS, group3options_in); + else if (compression_in == COMPRESSION_CCITTFAX4) + TIFFSetField(faxTIFF, TIFFTAG_GROUP4OPTIONS, group4options_in); + for (pn = 0; optind < argc; pn++, optind++) { + in = fopen(argv[optind], "rb"); + if (in == NULL) { + fprintf(stderr, + "%s: %s: Can not open\n", argv[0], argv[optind]); + continue; + } +#if defined(_WIN32) && defined(USE_WIN32_FILEIO) + TIFFSetClientdata(faxTIFF, (thandle_t)_get_osfhandle(fileno(in))); +#else + TIFFSetClientdata(faxTIFF, (thandle_t)fileno(in)); +#endif + TIFFSetFileName(faxTIFF, (const char*)argv[optind]); + TIFFSetField(out, TIFFTAG_IMAGEWIDTH, xsize); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, 1); + TIFFSetField(out, TIFFTAG_COMPRESSION, compression_out); + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, photometric_out); + TIFFSetField(out, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, 1); + switch (compression_out) { + /* g3 */ + case COMPRESSION_CCITTFAX3: + TIFFSetField(out, TIFFTAG_GROUP3OPTIONS, + group3options_out); + TIFFSetField(out, TIFFTAG_FAXMODE, mode); + rowsperstrip = + (defrowsperstrip)?defrowsperstrip:(uint32)-1L; + break; + + /* g4 */ + case COMPRESSION_CCITTFAX4: + TIFFSetField(out, TIFFTAG_GROUP4OPTIONS, + group4options_out); + TIFFSetField(out, TIFFTAG_FAXMODE, mode); + rowsperstrip = + (defrowsperstrip)?defrowsperstrip:(uint32)-1L; + break; + + default: + rowsperstrip = (defrowsperstrip) ? + defrowsperstrip : TIFFDefaultStripSize(out, 0); + } + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, rowsperstrip); + TIFFSetField(out, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + TIFFSetField(out, TIFFTAG_FILLORDER, fillorder_out); + TIFFSetField(out, TIFFTAG_SOFTWARE, "fax2tiff"); + TIFFSetField(out, TIFFTAG_XRESOLUTION, 204.0); + if (!stretch) { + TIFFGetField(faxTIFF, TIFFTAG_YRESOLUTION, &resY); + TIFFSetField(out, TIFFTAG_YRESOLUTION, resY); + } else + TIFFSetField(out, TIFFTAG_YRESOLUTION, 196.); + TIFFSetField(out, TIFFTAG_RESOLUTIONUNIT, RESUNIT_INCH); + TIFFSetField(out, TIFFTAG_PAGENUMBER, pn, npages); + + if (!verbose) + whandler = TIFFSetWarningHandler(NULL); + rows = copyFaxFile(faxTIFF, out); + fclose(in); + if (!verbose) + (void) TIFFSetWarningHandler(whandler); + + TIFFSetField(out, TIFFTAG_IMAGELENGTH, rows); + + if (verbose) { + fprintf(stderr, "%s:\n", argv[optind]); + fprintf(stderr, "%d rows in input\n", rows); + fprintf(stderr, "%ld total bad rows\n", + (long) badfaxlines); + fprintf(stderr, "%d max consecutive bad rows\n", badfaxrun); + } + if (compression_out == COMPRESSION_CCITTFAX3 && + mode == FAXMODE_CLASSF) { + TIFFSetField(out, TIFFTAG_BADFAXLINES, badfaxlines); + TIFFSetField(out, TIFFTAG_CLEANFAXDATA, badfaxlines ? + CLEANFAXDATA_REGENERATED : CLEANFAXDATA_CLEAN); + TIFFSetField(out, TIFFTAG_CONSECUTIVEBADFAXLINES, badfaxrun); + } + TIFFWriteDirectory(out); + } + TIFFClose(out); + _TIFFfree(rowbuf); + _TIFFfree(refbuf); + return (EXIT_SUCCESS); +} + +int +copyFaxFile(TIFF* tifin, TIFF* tifout) +{ + uint32 row; + uint32 linesize = TIFFhowmany8(xsize); + uint16 badrun; + int ok; + + tifin->tif_rawdatasize = (tmsize_t)TIFFGetFileSize(tifin); + tifin->tif_rawdata = _TIFFmalloc(tifin->tif_rawdatasize); + if (tifin->tif_rawdata == NULL) { + TIFFError(tifin->tif_name, "Not enough memory"); + return (0); + } + if (!ReadOK(tifin, tifin->tif_rawdata, tifin->tif_rawdatasize)) { + TIFFError(tifin->tif_name, "Read error at scanline 0"); + return (0); + } + tifin->tif_rawcp = tifin->tif_rawdata; + tifin->tif_rawcc = tifin->tif_rawdatasize; + + (*tifin->tif_setupdecode)(tifin); + (*tifin->tif_predecode)(tifin, (tsample_t) 0); + tifin->tif_row = 0; + badfaxlines = 0; + badfaxrun = 0; + + _TIFFmemset(refbuf, 0, linesize); + row = 0; + badrun = 0; /* current run of bad lines */ + while (tifin->tif_rawcc > 0) { + ok = (*tifin->tif_decoderow)(tifin, (tdata_t) rowbuf, + linesize, 0); + if (!ok) { + badfaxlines++; + badrun++; + /* regenerate line from previous good line */ + _TIFFmemcpy(rowbuf, refbuf, linesize); + } else { + if (badrun > badfaxrun) + badfaxrun = badrun; + badrun = 0; + _TIFFmemcpy(refbuf, rowbuf, linesize); + } + tifin->tif_row++; + + if (TIFFWriteScanline(tifout, rowbuf, row, 0) < 0) { + fprintf(stderr, "%s: Write error at row %ld.\n", + tifout->tif_name, (long) row); + break; + } + row++; + if (stretch) { + if (TIFFWriteScanline(tifout, rowbuf, row, 0) < 0) { + fprintf(stderr, "%s: Write error at row %ld.\n", + tifout->tif_name, (long) row); + break; + } + row++; + } + } + if (badrun > badfaxrun) + badfaxrun = badrun; + _TIFFfree(tifin->tif_rawdata); + return (row); +} + +char* stuff[] = { +"usage: fax2tiff [options] input.raw...", +"where options are:", +" -3 input data is G3-encoded [default]", +" -4 input data is G4-encoded", +" -U input data is uncompressed (G3 or G4)", +" -1 input data is 1D-encoded (G3 only) [default]", +" -2 input data is 2D-encoded (G3 only)", +" -P input is not EOL-aligned (G3 only) [default]", +" -A input is EOL-aligned (G3 only)", +" -M input data has MSB2LSB bit order", +" -L input data has LSB2MSB bit order [default]", +" -B input data has min 0 means black", +" -W input data has min 0 means white [default]", +" -R # input data has # resolution (lines/inch) [default is 196]", +" -X # input data has # width [default is 1728]", +"", +" -o out.tif write output to out.tif", +" -7 generate G3-encoded output [default]", +" -8 generate G4-encoded output", +" -u generate uncompressed output (G3 or G4)", +" -5 generate 1D-encoded output (G3 only)", +" -6 generate 2D-encoded output (G3 only) [default]", +" -p generate not EOL-aligned output (G3 only)", +" -a generate EOL-aligned output (G3 only) [default]", +" -c generate \"classic\" TIFF format", +" -f generate TIFF Class F (TIFF/F) format [default]", +" -m output fill order is MSB2LSB", +" -l output fill order is LSB2MSB [default]", +" -r # make each strip have no more than # rows", +" -s stretch image by duplicating scanlines", +" -v print information about conversion work", +" -z generate LZW compressed output", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(EXIT_FAILURE); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/gif2tiff.c b/src/SDL2/external/tiff-4.0.3/tools/gif2tiff.c new file mode 100644 index 000000000..17f7a19e6 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/gif2tiff.c @@ -0,0 +1,530 @@ +/* $Id: gif2tiff.c,v 1.12 2010-12-15 00:22:44 faxguy Exp $ */ + +/* + * Copyright (c) 1990-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +/* + * convert a GIF file into a TIFF file. + * based on Paul Haeberli's fromgif program which in turn is + * based on a GIF file reader by Marcel J.E. Mol March 23 1989 + * + * if input is 320 by 200 pixel aspect is probably 1.2 + * if input is 640 350 pixel aspect is probably 1.37 + * + */ +#include "tif_config.h" + +#include +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +#define GIFGAMMA (1.5) /* smaller makes output img brighter */ +#define IMAX 0xffff /* max intensity value */ +#define EXTRAFUDGE 128 /* some people write BAD .gif files */ + +#define streq(a,b) (strcmp(a,b) == 0) +#define strneq(a,b,n) (strncmp(a,b,n) == 0) + +unsigned short gamtab[256]; + +void +makegamtab(float gam) +{ + int i; + + for(i=0; i<256; i++) + gamtab[i] = (unsigned short) (IMAX*pow(i/255.0,gam)+0.5); +} + +char* stuff[] = { +"usage: gif2tiff [options] input.gif output.tif", +"where options are:", +" -r # make each strip have no more than # rows", +"", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] compress output with deflate encoding", +" -c packbits compress output with packbits encoding", +" -c none use no compression algorithm on output", +"", +"LZW and deflate options:", +" # set predictor value", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +#define COLSIZE 256 + +unsigned char *stackp; +unsigned int prefix[4096]; +unsigned char suffix[4096]; +unsigned char stack[4096]; +int datasize,codesize,codemask; /* Decoder working variables */ +int clear,eoi; /* Special code values */ +int avail, oldcode; + +FILE *infile; +int global; /* Is there a global color map? */ +int globalbits; /* Number of bits of global colors */ +unsigned char globalmap[COLSIZE][3];/* RGB values for global color map */ +unsigned char *raster; /* Decoded image data */ +unsigned long width, height; +unsigned short red[COLSIZE]; +unsigned short green[COLSIZE]; +unsigned short blue[COLSIZE]; +char *filename, *imagename; + +static uint16 compression = COMPRESSION_PACKBITS; +static uint16 predictor = 0; +static uint32 rowsperstrip = (uint32) -1; +static int processCompressOptions(char*); + +int convert(void); +int checksignature(void); +void readscreen(void); +int readgifimage(char*); +void readextension(void); +int readraster(void); +int process(int, unsigned char**); +void initcolors(unsigned char [COLSIZE][3], int); +void rasterize(int, char*); + +int +main(int argc, char* argv[]) +{ + extern int optind; + extern char *optarg; + int c, status; + + while ((c = getopt(argc, argv, "c:r:")) != -1) + switch (c) { + case 'c': /* compression scheme */ + if (!processCompressOptions(optarg)) + usage(); + break; + case 'r': /* rows/strip */ + rowsperstrip = atoi(optarg); + break; + case '?': + usage(); + /*NOTREACHED*/ + } + if (argc - optind != 2) + usage(); + + makegamtab(GIFGAMMA); + filename = argv[optind]; + imagename = argv[optind+1]; + if ((infile = fopen(imagename, "rb")) != NULL) { + int c; + fclose(infile); + printf("overwrite %s? ", imagename); fflush(stdout); + c = getc(stdin); + if (c != 'y' && c != 'Y') + return (1); + } + if ((infile = fopen(filename, "rb")) == NULL) { + perror(filename); + return (1); + } + status = convert(); + fclose(infile); + return (status); +} + +static int +processCompressOptions(char* opt) +{ + if (streq(opt, "none")) + compression = COMPRESSION_NONE; + else if (streq(opt, "packbits")) + compression = COMPRESSION_PACKBITS; + else if (strneq(opt, "lzw", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_LZW; + } else if (strneq(opt, "zip", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_DEFLATE; + } else + return (0); + return (1); +} + +int +convert(void) +{ + int ch; + char* mode = "w"; + + if (!checksignature()) + return (-1); + readscreen(); + while ((ch = getc(infile)) != ';' && ch != EOF) { + switch (ch) { + case '\0': break; /* this kludge for non-standard files */ + case ',': if (!readgifimage(mode)) + return (-1); + mode = "a"; /* subsequent images append */ + break; + case '!': readextension(); + break; + default: fprintf(stderr, "illegal GIF block type\n"); + return (-1); + } + } + return (0); +} + +int +checksignature(void) +{ + char buf[6]; + + fread(buf,1,6,infile); + if (strncmp(buf,"GIF",3)) { + fprintf(stderr, "file is not a GIF file\n"); + return 0; + } + if (strncmp(&buf[3],"87a",3)) { + fprintf(stderr, "unknown GIF version number\n"); + return 0; + } + return 1; +} + +/* + * readscreen - + * Get information which is global to all the images stored + * in the file + */ +void +readscreen(void) +{ + unsigned char buf[7]; + + fread(buf,1,7,infile); + global = buf[4] & 0x80; + if (global) { + globalbits = (buf[4] & 0x07) + 1; + fread(globalmap,3,((size_t)1)< 0; count = getc(infile)) { + fread(buf,1,count,infile); + for (ch=buf; count-- > 0; ch++) { + datum += (unsigned long) *ch << bits; + bits += 8; + while (bits >= codesize) { + code = datum & codemask; + datum >>= codesize; + bits -= codesize; + if (code == eoi) { /* This kludge put in */ + goto exitloop; /* because some GIF files*/ + } /* aren't standard */ + if (!process(code, &fill)) { + status = 0; + goto exitloop; + } + } + } + if (fill >= raster + width*height) { + fprintf(stderr, "raster full before eoi code\n"); + break; + } + } +exitloop: + if (fill != raster + width*height) { + fprintf(stderr, "warning: wrong rastersize: %ld bytes\n", + (long) (fill-raster)); + fprintf(stderr, " instead of %ld bytes\n", + (long) width*height); + } + return status; +} + +/* + * process - + * Process a compression code. "clear" resets the code table. + * Otherwise make a new code table entry, and output the bytes + * associated with the code. + */ +int +process(register int code, unsigned char** fill) +{ + int incode; + static unsigned char firstchar; + + if (code == clear) { + codesize = datasize + 1; + codemask = (1 << codesize) - 1; + avail = clear + 2; + oldcode = -1; + return 1; + } + + if (oldcode == -1) { + *(*fill)++ = suffix[code]; + firstchar = oldcode = code; + return 1; + } + if (code > avail) { + fprintf(stderr, "code %d too large for %d\n", code, avail); + return 0; + } + + incode = code; + if (code == avail) { /* the first code is always < avail */ + *stackp++ = firstchar; + code = oldcode; + } + while (code > clear) { + *stackp++ = suffix[code]; + code = prefix[code]; + } + + *stackp++ = firstchar = suffix[code]; + prefix[avail] = oldcode; + suffix[avail] = firstchar; + avail++; + + if (((avail & codemask) == 0) && (avail < 4096)) { + codesize++; + codemask += avail; + } + oldcode = incode; + do { + *(*fill)++ = *--stackp; + } while (stackp > stack); + return 1; +} + +/* + * initcolors - + * Convert a color map (local or global) to arrays with R, G and B + * values. + * + */ +void +initcolors(unsigned char colormap[COLSIZE][3], int ncolors) +{ + register int i; + + for (i = 0; i < ncolors; i++) { + red[i] = gamtab[colormap[i][0]]; + green[i] = gamtab[colormap[i][1]]; + blue[i] = gamtab[colormap[i][2]]; + } +} + +void +rasterize(int interleaved, char* mode) +{ + register unsigned long row; + unsigned char *newras; + unsigned char *ras; + TIFF *tif; + tstrip_t strip; + tsize_t stripsize; + + if ((newras = (unsigned char*) _TIFFmalloc(width*height+EXTRAFUDGE)) == NULL) { + fprintf(stderr, "not enough memory for image\n"); + return; + } +#define DRAWSEGMENT(offset, step) { \ + for (row = offset; row < height; row += step) { \ + _TIFFmemcpy(newras + row*width, ras, width);\ + ras += width; \ + } \ + } + ras = raster; + if (interleaved) { + DRAWSEGMENT(0, 8); + DRAWSEGMENT(4, 8); + DRAWSEGMENT(2, 4); + DRAWSEGMENT(1, 2); + } else + DRAWSEGMENT(0, 1); +#undef DRAWSEGMENT + + tif = TIFFOpen(imagename, mode); + if (!tif) { + TIFFError(imagename,"Can not open output image"); + exit(-1); + } + TIFFSetField(tif, TIFFTAG_IMAGEWIDTH, (uint32) width); + TIFFSetField(tif, TIFFTAG_IMAGELENGTH, (uint32) height); + TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_PALETTE); + TIFFSetField(tif, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, 1); + TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 8); + TIFFSetField(tif, TIFFTAG_ROWSPERSTRIP, + rowsperstrip = TIFFDefaultStripSize(tif, rowsperstrip)); + TIFFSetField(tif, TIFFTAG_COMPRESSION, compression); + switch (compression) { + case COMPRESSION_LZW: + case COMPRESSION_DEFLATE: + if (predictor != 0) + TIFFSetField(tif, TIFFTAG_PREDICTOR, predictor); + break; + } + TIFFSetField(tif, TIFFTAG_COLORMAP, red, green, blue); + TIFFSetField(tif, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT); + strip = 0; + stripsize = TIFFStripSize(tif); + for (row=0; row height-row) { + rowsperstrip = height-row; + stripsize = TIFFVStripSize(tif, rowsperstrip); + } + if (TIFFWriteEncodedStrip(tif, strip, newras+row*width, stripsize) < 0) + break; + strip++; + } + TIFFClose(tif); + + _TIFFfree(newras); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/pal2rgb.c b/src/SDL2/external/tiff-4.0.3/tools/pal2rgb.c new file mode 100644 index 000000000..8608aad1e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/pal2rgb.c @@ -0,0 +1,435 @@ +/* $Id: pal2rgb.c,v 1.13 2010-07-02 12:02:56 dron Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +#define streq(a,b) (strcmp(a,b) == 0) +#define strneq(a,b,n) (strncmp(a,b,n) == 0) + +static void usage(void); +static void cpTags(TIFF* in, TIFF* out); + +static int +checkcmap(int n, uint16* r, uint16* g, uint16* b) +{ + while (n-- > 0) + if (*r++ >= 256 || *g++ >= 256 || *b++ >= 256) + return (16); + fprintf(stderr, "Warning, assuming 8-bit colormap.\n"); + return (8); +} + +#define CopyField(tag, v) \ + if (TIFFGetField(in, tag, &v)) TIFFSetField(out, tag, v) +#define CopyField3(tag, v1, v2, v3) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3)) TIFFSetField(out, tag, v1, v2, v3) + +static uint16 compression = (uint16) -1; +static uint16 predictor = 0; +static int quality = 75; /* JPEG quality */ +static int jpegcolormode = JPEGCOLORMODE_RGB; +static int processCompressOptions(char*); + +int +main(int argc, char* argv[]) +{ + uint16 bitspersample, shortv; + uint32 imagewidth, imagelength; + uint16 config = PLANARCONFIG_CONTIG; + uint32 rowsperstrip = (uint32) -1; + uint16 photometric = PHOTOMETRIC_RGB; + uint16 *rmap, *gmap, *bmap; + uint32 row; + int cmap = -1; + TIFF *in, *out; + int c; + extern int optind; + extern char* optarg; + + while ((c = getopt(argc, argv, "C:c:p:r:")) != -1) + switch (c) { + case 'C': /* force colormap interpretation */ + cmap = atoi(optarg); + break; + case 'c': /* compression scheme */ + if (!processCompressOptions(optarg)) + usage(); + break; + case 'p': /* planar configuration */ + if (streq(optarg, "separate")) + config = PLANARCONFIG_SEPARATE; + else if (streq(optarg, "contig")) + config = PLANARCONFIG_CONTIG; + else + usage(); + break; + case 'r': /* rows/strip */ + rowsperstrip = atoi(optarg); + break; + case '?': + usage(); + /*NOTREACHED*/ + } + if (argc - optind != 2) + usage(); + in = TIFFOpen(argv[optind], "r"); + if (in == NULL) + return (-1); + if (!TIFFGetField(in, TIFFTAG_PHOTOMETRIC, &shortv) || + shortv != PHOTOMETRIC_PALETTE) { + fprintf(stderr, "%s: Expecting a palette image.\n", + argv[optind]); + return (-1); + } + if (!TIFFGetField(in, TIFFTAG_COLORMAP, &rmap, &gmap, &bmap)) { + fprintf(stderr, + "%s: No colormap (not a valid palette image).\n", + argv[optind]); + return (-1); + } + bitspersample = 0; + TIFFGetField(in, TIFFTAG_BITSPERSAMPLE, &bitspersample); + if (bitspersample != 8) { + fprintf(stderr, "%s: Sorry, can only handle 8-bit images.\n", + argv[optind]); + return (-1); + } + out = TIFFOpen(argv[optind+1], "w"); + if (out == NULL) + return (-2); + cpTags(in, out); + TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &imagewidth); + TIFFGetField(in, TIFFTAG_IMAGELENGTH, &imagelength); + if (compression != (uint16)-1) + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + else + TIFFGetField(in, TIFFTAG_COMPRESSION, &compression); + switch (compression) { + case COMPRESSION_JPEG: + if (jpegcolormode == JPEGCOLORMODE_RGB) + photometric = PHOTOMETRIC_YCBCR; + else + photometric = PHOTOMETRIC_RGB; + TIFFSetField(out, TIFFTAG_JPEGQUALITY, quality); + TIFFSetField(out, TIFFTAG_JPEGCOLORMODE, jpegcolormode); + break; + case COMPRESSION_LZW: + case COMPRESSION_DEFLATE: + if (predictor != 0) + TIFFSetField(out, TIFFTAG_PREDICTOR, predictor); + break; + } + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, photometric); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, 3); + TIFFSetField(out, TIFFTAG_PLANARCONFIG, config); + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, + rowsperstrip = TIFFDefaultStripSize(out, rowsperstrip)); + (void) TIFFGetField(in, TIFFTAG_PLANARCONFIG, &shortv); + if (cmap == -1) + cmap = checkcmap(1<= 0; i--) { +#define CVT(x) (((x) * 255) / ((1L<<16)-1)) + rmap[i] = CVT(rmap[i]); + gmap[i] = CVT(gmap[i]); + bmap[i] = CVT(bmap[i]); + } + } + { unsigned char *ibuf, *obuf; + register unsigned char* pp; + register uint32 x; + ibuf = (unsigned char*)_TIFFmalloc(TIFFScanlineSize(in)); + obuf = (unsigned char*)_TIFFmalloc(TIFFScanlineSize(out)); + switch (config) { + case PLANARCONFIG_CONTIG: + for (row = 0; row < imagelength; row++) { + if (!TIFFReadScanline(in, ibuf, row, 0)) + goto done; + pp = obuf; + for (x = 0; x < imagewidth; x++) { + *pp++ = (unsigned char) rmap[ibuf[x]]; + *pp++ = (unsigned char) gmap[ibuf[x]]; + *pp++ = (unsigned char) bmap[ibuf[x]]; + } + if (!TIFFWriteScanline(out, obuf, row, 0)) + goto done; + } + break; + case PLANARCONFIG_SEPARATE: + for (row = 0; row < imagelength; row++) { + if (!TIFFReadScanline(in, ibuf, row, 0)) + goto done; + for (pp = obuf, x = 0; x < imagewidth; x++) + *pp++ = (unsigned char) rmap[ibuf[x]]; + if (!TIFFWriteScanline(out, obuf, row, 0)) + goto done; + for (pp = obuf, x = 0; x < imagewidth; x++) + *pp++ = (unsigned char) gmap[ibuf[x]]; + if (!TIFFWriteScanline(out, obuf, row, 0)) + goto done; + for (pp = obuf, x = 0; x < imagewidth; x++) + *pp++ = (unsigned char) bmap[ibuf[x]]; + if (!TIFFWriteScanline(out, obuf, row, 0)) + goto done; + } + break; + } + _TIFFfree(ibuf); + _TIFFfree(obuf); + } +done: + (void) TIFFClose(in); + (void) TIFFClose(out); + return (0); +} + +static int +processCompressOptions(char* opt) +{ + if (streq(opt, "none")) + compression = COMPRESSION_NONE; + else if (streq(opt, "packbits")) + compression = COMPRESSION_PACKBITS; + else if (strneq(opt, "jpeg", 4)) { + char* cp = strchr(opt, ':'); + + compression = COMPRESSION_JPEG; + while( cp ) + { + if (isdigit((int)cp[1])) + quality = atoi(cp+1); + else if (cp[1] == 'r' ) + jpegcolormode = JPEGCOLORMODE_RAW; + else + usage(); + + cp = strchr(cp+1,':'); + } + } else if (strneq(opt, "lzw", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_LZW; + } else if (strneq(opt, "zip", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_DEFLATE; + } else + return (0); + return (1); +} + +#define CopyField(tag, v) \ + if (TIFFGetField(in, tag, &v)) TIFFSetField(out, tag, v) +#define CopyField2(tag, v1, v2) \ + if (TIFFGetField(in, tag, &v1, &v2)) TIFFSetField(out, tag, v1, v2) +#define CopyField3(tag, v1, v2, v3) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3)) TIFFSetField(out, tag, v1, v2, v3) +#define CopyField4(tag, v1, v2, v3, v4) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3, &v4)) TIFFSetField(out, tag, v1, v2, v3, v4) + +static void +cpTag(TIFF* in, TIFF* out, uint16 tag, uint16 count, TIFFDataType type) +{ + switch (type) { + case TIFF_SHORT: + if (count == 1) { + uint16 shortv; + CopyField(tag, shortv); + } else if (count == 2) { + uint16 shortv1, shortv2; + CopyField2(tag, shortv1, shortv2); + } else if (count == 4) { + uint16 *tr, *tg, *tb, *ta; + CopyField4(tag, tr, tg, tb, ta); + } else if (count == (uint16) -1) { + uint16 shortv1; + uint16* shortav; + CopyField2(tag, shortv1, shortav); + } + break; + case TIFF_LONG: + { uint32 longv; + CopyField(tag, longv); + } + break; + case TIFF_RATIONAL: + if (count == 1) { + float floatv; + CopyField(tag, floatv); + } else if (count == (uint16) -1) { + float* floatav; + CopyField(tag, floatav); + } + break; + case TIFF_ASCII: + { char* stringv; + CopyField(tag, stringv); + } + break; + case TIFF_DOUBLE: + if (count == 1) { + double doublev; + CopyField(tag, doublev); + } else if (count == (uint16) -1) { + double* doubleav; + CopyField(tag, doubleav); + } + break; + default: + TIFFError(TIFFFileName(in), + "Data type %d is not supported, tag %d skipped.", + tag, type); + } +} + +#undef CopyField4 +#undef CopyField3 +#undef CopyField2 +#undef CopyField + +static struct cpTag { + uint16 tag; + uint16 count; + TIFFDataType type; +} tags[] = { + { TIFFTAG_IMAGEWIDTH, 1, TIFF_LONG }, + { TIFFTAG_IMAGELENGTH, 1, TIFF_LONG }, + { TIFFTAG_BITSPERSAMPLE, 1, TIFF_SHORT }, + { TIFFTAG_COMPRESSION, 1, TIFF_SHORT }, + { TIFFTAG_FILLORDER, 1, TIFF_SHORT }, + { TIFFTAG_ROWSPERSTRIP, 1, TIFF_LONG }, + { TIFFTAG_GROUP3OPTIONS, 1, TIFF_LONG }, + { TIFFTAG_SUBFILETYPE, 1, TIFF_LONG }, + { TIFFTAG_THRESHHOLDING, 1, TIFF_SHORT }, + { TIFFTAG_DOCUMENTNAME, 1, TIFF_ASCII }, + { TIFFTAG_IMAGEDESCRIPTION, 1, TIFF_ASCII }, + { TIFFTAG_MAKE, 1, TIFF_ASCII }, + { TIFFTAG_MODEL, 1, TIFF_ASCII }, + { TIFFTAG_ORIENTATION, 1, TIFF_SHORT }, + { TIFFTAG_MINSAMPLEVALUE, 1, TIFF_SHORT }, + { TIFFTAG_MAXSAMPLEVALUE, 1, TIFF_SHORT }, + { TIFFTAG_XRESOLUTION, 1, TIFF_RATIONAL }, + { TIFFTAG_YRESOLUTION, 1, TIFF_RATIONAL }, + { TIFFTAG_PAGENAME, 1, TIFF_ASCII }, + { TIFFTAG_XPOSITION, 1, TIFF_RATIONAL }, + { TIFFTAG_YPOSITION, 1, TIFF_RATIONAL }, + { TIFFTAG_GROUP4OPTIONS, 1, TIFF_LONG }, + { TIFFTAG_RESOLUTIONUNIT, 1, TIFF_SHORT }, + { TIFFTAG_PAGENUMBER, 2, TIFF_SHORT }, + { TIFFTAG_SOFTWARE, 1, TIFF_ASCII }, + { TIFFTAG_DATETIME, 1, TIFF_ASCII }, + { TIFFTAG_ARTIST, 1, TIFF_ASCII }, + { TIFFTAG_HOSTCOMPUTER, 1, TIFF_ASCII }, + { TIFFTAG_WHITEPOINT, 2, TIFF_RATIONAL }, + { TIFFTAG_PRIMARYCHROMATICITIES, (uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_HALFTONEHINTS, 2, TIFF_SHORT }, + { TIFFTAG_BADFAXLINES, 1, TIFF_LONG }, + { TIFFTAG_CLEANFAXDATA, 1, TIFF_SHORT }, + { TIFFTAG_CONSECUTIVEBADFAXLINES, 1, TIFF_LONG }, + { TIFFTAG_INKSET, 1, TIFF_SHORT }, + { TIFFTAG_INKNAMES, 1, TIFF_ASCII }, + { TIFFTAG_DOTRANGE, 2, TIFF_SHORT }, + { TIFFTAG_TARGETPRINTER, 1, TIFF_ASCII }, + { TIFFTAG_SAMPLEFORMAT, 1, TIFF_SHORT }, + { TIFFTAG_YCBCRCOEFFICIENTS, (uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_YCBCRSUBSAMPLING, 2, TIFF_SHORT }, + { TIFFTAG_YCBCRPOSITIONING, 1, TIFF_SHORT }, + { TIFFTAG_REFERENCEBLACKWHITE, (uint16) -1,TIFF_RATIONAL }, +}; +#define NTAGS (sizeof (tags) / sizeof (tags[0])) + +static void +cpTags(TIFF* in, TIFF* out) +{ + struct cpTag *p; + for (p = tags; p < &tags[NTAGS]; p++) + cpTag(in, out, p->tag, p->count, p->type); +} +#undef NTAGS + +char* stuff[] = { +"usage: pal2rgb [options] input.tif output.tif", +"where options are:", +" -p contig pack samples contiguously (e.g. RGBRGB...)", +" -p separate store samples separately (e.g. RRR...GGG...BBB...)", +" -r # make each strip have no more than # rows", +" -C 8 assume 8-bit colormap values (instead of 16-bit)", +" -C 16 assume 16-bit colormap values", +"", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] compress output with deflate encoding", +" -c packbits compress output with packbits encoding", +" -c none use no compression algorithm on output", +"", +"LZW and deflate options:", +" # set predictor value", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/ppm2tiff.c b/src/SDL2/external/tiff-4.0.3/tools/ppm2tiff.c new file mode 100644 index 000000000..f78d5d4ec --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/ppm2tiff.c @@ -0,0 +1,366 @@ +/* $Id: ppm2tiff.c,v 1.16 2010-04-10 19:22:34 bfriesen Exp $ */ + +/* + * Copyright (c) 1991-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef HAVE_FCNTL_H +# include +#endif + +#ifdef HAVE_IO_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +#ifndef HAVE_GETOPT +extern int getopt(int, char**, char*); +#endif + +#define streq(a,b) (strcmp(a,b) == 0) +#define strneq(a,b,n) (strncmp(a,b,n) == 0) + +static uint16 compression = COMPRESSION_PACKBITS; +static uint16 predictor = 0; +static int quality = 75; /* JPEG quality */ +static int jpegcolormode = JPEGCOLORMODE_RGB; +static uint32 g3opts; + +static void usage(void); +static int processCompressOptions(char*); + +static void +BadPPM(char* file) +{ + fprintf(stderr, "%s: Not a PPM file.\n", file); + exit(-2); +} + +int +main(int argc, char* argv[]) +{ + uint16 photometric = 0; + uint32 rowsperstrip = (uint32) -1; + double resolution = -1; + unsigned char *buf = NULL; + tsize_t linebytes = 0; + uint16 spp = 1; + uint16 bpp = 8; + TIFF *out; + FILE *in; + unsigned int w, h, prec, row; + char *infile; + int c; + extern int optind; + extern char* optarg; + + if (argc < 2) { + fprintf(stderr, "%s: Too few arguments\n", argv[0]); + usage(); + } + while ((c = getopt(argc, argv, "c:r:R:")) != -1) + switch (c) { + case 'c': /* compression scheme */ + if (!processCompressOptions(optarg)) + usage(); + break; + case 'r': /* rows/strip */ + rowsperstrip = atoi(optarg); + break; + case 'R': /* resolution */ + resolution = atof(optarg); + break; + case '?': + usage(); + /*NOTREACHED*/ + } + + if (optind + 2 < argc) { + fprintf(stderr, "%s: Too many arguments\n", argv[0]); + usage(); + } + + /* + * If only one file is specified, read input from + * stdin; otherwise usage is: ppm2tiff input output. + */ + if (argc - optind > 1) { + infile = argv[optind++]; + in = fopen(infile, "rb"); + if (in == NULL) { + fprintf(stderr, "%s: Can not open.\n", infile); + return (-1); + } + } else { + infile = ""; + in = stdin; +#if defined(HAVE_SETMODE) && defined(O_BINARY) + setmode(fileno(stdin), O_BINARY); +#endif + } + + if (fgetc(in) != 'P') + BadPPM(infile); + switch (fgetc(in)) { + case '4': /* it's a PBM file */ + bpp = 1; + spp = 1; + photometric = PHOTOMETRIC_MINISWHITE; + break; + case '5': /* it's a PGM file */ + bpp = 8; + spp = 1; + photometric = PHOTOMETRIC_MINISBLACK; + break; + case '6': /* it's a PPM file */ + bpp = 8; + spp = 3; + photometric = PHOTOMETRIC_RGB; + if (compression == COMPRESSION_JPEG && + jpegcolormode == JPEGCOLORMODE_RGB) + photometric = PHOTOMETRIC_YCBCR; + break; + default: + BadPPM(infile); + } + + /* Parse header */ + while(1) { + if (feof(in)) + BadPPM(infile); + c = fgetc(in); + /* Skip whitespaces (blanks, TABs, CRs, LFs) */ + if (strchr(" \t\r\n", c)) + continue; + + /* Check for comment line */ + if (c == '#') { + do { + c = fgetc(in); + } while(!(strchr("\r\n", c) || feof(in))); + continue; + } + + ungetc(c, in); + break; + } + switch (bpp) { + case 1: + if (fscanf(in, " %u %u", &w, &h) != 2) + BadPPM(infile); + if (fgetc(in) != '\n') + BadPPM(infile); + break; + case 8: + if (fscanf(in, " %u %u %u", &w, &h, &prec) != 3) + BadPPM(infile); + if (fgetc(in) != '\n' || prec != 255) + BadPPM(infile); + break; + } + out = TIFFOpen(argv[optind], "w"); + if (out == NULL) + return (-4); + TIFFSetField(out, TIFFTAG_IMAGEWIDTH, (uint32) w); + TIFFSetField(out, TIFFTAG_IMAGELENGTH, (uint32) h); + TIFFSetField(out, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, spp); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, bpp); + TIFFSetField(out, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, photometric); + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + switch (compression) { + case COMPRESSION_JPEG: + TIFFSetField(out, TIFFTAG_JPEGQUALITY, quality); + TIFFSetField(out, TIFFTAG_JPEGCOLORMODE, jpegcolormode); + break; + case COMPRESSION_LZW: + case COMPRESSION_DEFLATE: + if (predictor != 0) + TIFFSetField(out, TIFFTAG_PREDICTOR, predictor); + break; + case COMPRESSION_CCITTFAX3: + TIFFSetField(out, TIFFTAG_GROUP3OPTIONS, g3opts); + break; + } + switch (bpp) { + case 1: + linebytes = (spp * w + (8 - 1)) / 8; + if (rowsperstrip == (uint32) -1) { + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, h); + } else { + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, + TIFFDefaultStripSize(out, rowsperstrip)); + } + break; + case 8: + linebytes = spp * w; + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, + TIFFDefaultStripSize(out, rowsperstrip)); + break; + } + if (TIFFScanlineSize(out) > linebytes) + buf = (unsigned char *)_TIFFmalloc(linebytes); + else + buf = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(out)); + if (resolution > 0) { + TIFFSetField(out, TIFFTAG_XRESOLUTION, resolution); + TIFFSetField(out, TIFFTAG_YRESOLUTION, resolution); + TIFFSetField(out, TIFFTAG_RESOLUTIONUNIT, RESUNIT_INCH); + } + for (row = 0; row < h; row++) { + if (fread(buf, linebytes, 1, in) != 1) { + fprintf(stderr, "%s: scanline %lu: Read error.\n", + infile, (unsigned long) row); + break; + } + if (TIFFWriteScanline(out, buf, row, 0) < 0) + break; + } + (void) TIFFClose(out); + if (buf) + _TIFFfree(buf); + return (0); +} + +static void +processG3Options(char* cp) +{ + g3opts = 0; + if( (cp = strchr(cp, ':')) ) { + do { + cp++; + if (strneq(cp, "1d", 2)) + g3opts &= ~GROUP3OPT_2DENCODING; + else if (strneq(cp, "2d", 2)) + g3opts |= GROUP3OPT_2DENCODING; + else if (strneq(cp, "fill", 4)) + g3opts |= GROUP3OPT_FILLBITS; + else + usage(); + } while( (cp = strchr(cp, ':')) ); + } +} + +static int +processCompressOptions(char* opt) +{ + if (streq(opt, "none")) + compression = COMPRESSION_NONE; + else if (streq(opt, "packbits")) + compression = COMPRESSION_PACKBITS; + else if (strneq(opt, "jpeg", 4)) { + char* cp = strchr(opt, ':'); + + compression = COMPRESSION_JPEG; + while (cp) + { + if (isdigit((int)cp[1])) + quality = atoi(cp+1); + else if (cp[1] == 'r' ) + jpegcolormode = JPEGCOLORMODE_RAW; + else + usage(); + + cp = strchr(cp+1,':'); + } + } else if (strneq(opt, "g3", 2)) { + processG3Options(opt); + compression = COMPRESSION_CCITTFAX3; + } else if (streq(opt, "g4")) { + compression = COMPRESSION_CCITTFAX4; + } else if (strneq(opt, "lzw", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_LZW; + } else if (strneq(opt, "zip", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_DEFLATE; + } else + return (0); + return (1); +} + +char* stuff[] = { +"usage: ppm2tiff [options] input.ppm output.tif", +"where options are:", +" -r # make each strip have no more than # rows", +" -R # set x&y resolution (dpi)", +"", +" -c jpeg[:opts] compress output with JPEG encoding", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] compress output with deflate encoding", +" -c packbits compress output with packbits encoding (the default)", +" -c g3[:opts] compress output with CCITT Group 3 encoding", +" -c g4 compress output with CCITT Group 4 encoding", +" -c none use no compression algorithm on output", +"", +"JPEG options:", +" # set compression quality level (0-100, default 75)", +" r output color image as RGB rather than YCbCr", +"LZW and deflate options:", +" # set predictor value", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/ras2tiff.c b/src/SDL2/external/tiff-4.0.3/tools/ras2tiff.c new file mode 100644 index 000000000..ec8a07125 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/ras2tiff.c @@ -0,0 +1,316 @@ +/* $Id: ras2tiff.c,v 1.18 2010-03-10 18:56:49 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "rasterfile.h" +#include "tiffio.h" + +#ifndef howmany +#define howmany(x, y) (((x)+((y)-1))/(y)) +#endif +#define streq(a,b) (strcmp(a,b) == 0) +#define strneq(a,b,n) (strncmp(a,b,n) == 0) + +static uint16 compression = (uint16) -1; +static int jpegcolormode = JPEGCOLORMODE_RGB; +static int quality = 75; /* JPEG quality */ +static uint16 predictor = 0; + +static void usage(void); +static int processCompressOptions(char*); + +int +main(int argc, char* argv[]) +{ + unsigned char* buf; + long row; + tsize_t linebytes, scanline; + TIFF *out; + FILE *in; + struct rasterfile h; + uint16 photometric; + uint16 config = PLANARCONFIG_CONTIG; + uint32 rowsperstrip = (uint32) -1; + int c; + extern int optind; + extern char* optarg; + + while ((c = getopt(argc, argv, "c:r:h")) != -1) + switch (c) { + case 'c': /* compression scheme */ + if (!processCompressOptions(optarg)) + usage(); + break; + case 'r': /* rows/strip */ + rowsperstrip = atoi(optarg); + break; + case 'h': + usage(); + /*NOTREACHED*/ + } + if (argc - optind != 2) + usage(); + in = fopen(argv[optind], "rb"); + if (in == NULL) { + fprintf(stderr, "%s: Can not open.\n", argv[optind]); + return (-1); + } + if (fread(&h, sizeof (h), 1, in) != 1) { + fprintf(stderr, "%s: Can not read header.\n", argv[optind]); + fclose(in); + return (-2); + } + if (strcmp(h.ras_magic, RAS_MAGIC) == 0) { +#ifndef WORDS_BIGENDIAN + TIFFSwabLong((uint32 *)&h.ras_width); + TIFFSwabLong((uint32 *)&h.ras_height); + TIFFSwabLong((uint32 *)&h.ras_depth); + TIFFSwabLong((uint32 *)&h.ras_length); + TIFFSwabLong((uint32 *)&h.ras_type); + TIFFSwabLong((uint32 *)&h.ras_maptype); + TIFFSwabLong((uint32 *)&h.ras_maplength); +#endif + } else if (strcmp(h.ras_magic, RAS_MAGIC_INV) == 0) { +#ifdef WORDS_BIGENDIAN + TIFFSwabLong((uint32 *)&h.ras_width); + TIFFSwabLong((uint32 *)&h.ras_height); + TIFFSwabLong((uint32 *)&h.ras_depth); + TIFFSwabLong((uint32 *)&h.ras_length); + TIFFSwabLong((uint32 *)&h.ras_type); + TIFFSwabLong((uint32 *)&h.ras_maptype); + TIFFSwabLong((uint32 *)&h.ras_maplength); +#endif + } else { + fprintf(stderr, "%s: Not a rasterfile.\n", argv[optind]); + fclose(in); + return (-3); + } + out = TIFFOpen(argv[optind+1], "w"); + if (out == NULL) + { + fclose(in); + return (-4); + } + TIFFSetField(out, TIFFTAG_IMAGEWIDTH, (uint32) h.ras_width); + TIFFSetField(out, TIFFTAG_IMAGELENGTH, (uint32) h.ras_height); + TIFFSetField(out, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, h.ras_depth > 8 ? 3 : 1); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, h.ras_depth > 1 ? 8 : 1); + TIFFSetField(out, TIFFTAG_PLANARCONFIG, config); + if (h.ras_maptype != RMT_NONE) { + uint16* red; + register uint16* map; + register int i, j; + int mapsize; + + buf = (unsigned char *)_TIFFmalloc(h.ras_maplength); + if (buf == NULL) { + fprintf(stderr, "No space to read in colormap.\n"); + return (-5); + } + if (fread(buf, h.ras_maplength, 1, in) != 1) { + fprintf(stderr, "%s: Read error on colormap.\n", + argv[optind]); + return (-6); + } + mapsize = 1< mapsize*3) { + fprintf(stderr, + "%s: Huh, %ld colormap entries, should be %d?\n", + argv[optind], h.ras_maplength, mapsize*3); + return (-7); + } + red = (uint16*)_TIFFmalloc(mapsize * 3 * sizeof (uint16)); + if (red == NULL) { + fprintf(stderr, "No space for colormap.\n"); + return (-8); + } + map = red; + for (j = 0; j < 3; j++) { +#define SCALE(x) (((x)*((1L<<16)-1))/255) + for (i = h.ras_maplength/3; i-- > 0;) + *map++ = SCALE(*buf++); + if ((i = h.ras_maplength/3) < mapsize) { + i = mapsize - i; + _TIFFmemset(map, 0, i*sizeof (uint16)); + map += i; + } + } + TIFFSetField(out, TIFFTAG_COLORMAP, + red, red + mapsize, red + 2*mapsize); + photometric = PHOTOMETRIC_PALETTE; + if (compression == (uint16) -1) + compression = COMPRESSION_PACKBITS; + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + } else { + /* XXX this is bogus... */ + photometric = h.ras_depth == 24 ? + PHOTOMETRIC_RGB : PHOTOMETRIC_MINISBLACK; + if (compression == (uint16) -1) + compression = COMPRESSION_LZW; + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + } + switch (compression) { + case COMPRESSION_JPEG: + if (photometric == PHOTOMETRIC_RGB && jpegcolormode == JPEGCOLORMODE_RGB) + photometric = PHOTOMETRIC_YCBCR; + TIFFSetField(out, TIFFTAG_JPEGQUALITY, quality); + TIFFSetField(out, TIFFTAG_JPEGCOLORMODE, jpegcolormode); + break; + case COMPRESSION_LZW: + case COMPRESSION_DEFLATE: + if (predictor != 0) + TIFFSetField(out, TIFFTAG_PREDICTOR, predictor); + break; + } + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, photometric); + linebytes = ((h.ras_depth*h.ras_width+15) >> 3) &~ 1; + scanline = TIFFScanlineSize(out); + if (scanline > linebytes) { + buf = (unsigned char *)_TIFFmalloc(scanline); + _TIFFmemset(buf+linebytes, 0, scanline-linebytes); + } else + buf = (unsigned char *)_TIFFmalloc(linebytes); + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, + TIFFDefaultStripSize(out, rowsperstrip)); + for (row = 0; row < h.ras_height; row++) { + if (fread(buf, linebytes, 1, in) != 1) { + fprintf(stderr, "%s: scanline %ld: Read error.\n", + argv[optind], row); + break; + } + if (h.ras_type == RT_STANDARD && h.ras_depth == 24) { + tsize_t cc = h.ras_width; + unsigned char* cp = buf; +#define SWAP(a,b) { unsigned char t = (a); (a) = (b); (b) = t; } + do { + SWAP(cp[0], cp[2]); + cp += 3; + } while (--cc); + } + if (TIFFWriteScanline(out, buf, row, 0) < 0) + break; + } + (void) TIFFClose(out); + fclose(in); + return (0); +} + +static int +processCompressOptions(char* opt) +{ + if (streq(opt, "none")) + compression = COMPRESSION_NONE; + else if (streq(opt, "packbits")) + compression = COMPRESSION_PACKBITS; + else if (strneq(opt, "jpeg", 4)) { + char* cp = strchr(opt, ':'); + + compression = COMPRESSION_JPEG; + while( cp ) + { + if (isdigit((int)cp[1])) + quality = atoi(cp+1); + else if (cp[1] == 'r' ) + jpegcolormode = JPEGCOLORMODE_RAW; + else + usage(); + + cp = strchr(cp+1,':'); + } + } else if (strneq(opt, "lzw", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_LZW; + } else if (strneq(opt, "zip", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_DEFLATE; + } else + return (0); + return (1); +} + +char* stuff[] = { +"usage: ras2tiff [options] input.ras output.tif", +"where options are:", +" -r # make each strip have no more than # rows", +"", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] compress output with deflate encoding", +" -c jpeg[:opts] compress output with JPEG encoding", +" -c packbits compress output with packbits encoding", +" -c none use no compression algorithm on output", +"", +"JPEG options:", +" # set compression quality level (0-100, default 75)", +" r output color image as RGB rather than YCbCr", +"For example, -c jpeg:r:50 to get JPEG-encoded RGB data with 50% comp. quality", +"", +"LZW and deflate options:", +" # set predictor value", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +" -h this help message", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/rasterfile.h b/src/SDL2/external/tiff-4.0.3/tools/rasterfile.h new file mode 100644 index 000000000..833e095c7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/rasterfile.h @@ -0,0 +1,42 @@ +/* $Header: /cvs/libtiff/tools/rasterfile.h,v 1.3 2003/11/12 19:14:33 dron Exp $ */ + +/* + * Description of header for files containing raster images + */ +struct rasterfile { + char ras_magic[4]; /* magic number */ + long ras_width; /* width (pixels) of image */ + long ras_height; /* height (pixels) of image */ + long ras_depth; /* depth (1, 8, or 24 bits) of pixel */ + long ras_length; /* length (bytes) of image */ + long ras_type; /* type of file; see RT_* below */ + long ras_maptype; /* type of colormap; see RMT_* below */ + long ras_maplength; /* length (bytes) of following map */ + /* color map follows for ras_maplength bytes, followed by image */ +}; +#define RAS_MAGIC "\x59\xa6\x6a\x95" +#define RAS_MAGIC_INV "\x95\x6a\xa6\x59" + + /* Sun supported ras_type's */ +#define RT_OLD 0 /* Raw pixrect image in 68000 byte order */ +#define RT_STANDARD 1 /* Raw pixrect image in 68000 byte order */ +#define RT_BYTE_ENCODED 2 /* Run-length compression of bytes */ +#define RT_EXPERIMENTAL 0xffff /* Reserved for testing */ + + /* Sun registered ras_maptype's */ +#define RMT_RAW 2 + /* Sun supported ras_maptype's */ +#define RMT_NONE 0 /* ras_maplength is expected to be 0 */ +#define RMT_EQUAL_RGB 1 /* red[ras_maplength/3],green[],blue[] */ + +/* + * NOTES: + * Each line of the image is rounded out to a multiple of 16 bits. + * This corresponds to the rounding convention used by the memory pixrect + * package (/usr/include/pixrect/memvar.h) of the SunWindows system. + * The ras_encoding field (always set to 0 by Sun's supported software) + * was renamed to ras_length in release 2.0. As a result, rasterfiles + * of type 0 generated by the old software claim to have 0 length; for + * compatibility, code reading rasterfiles must be prepared to compute the + * true length from the width, height, and depth fields. + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/raw2tiff.c b/src/SDL2/external/tiff-4.0.3/tools/raw2tiff.c new file mode 100644 index 000000000..9ab980e51 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/raw2tiff.c @@ -0,0 +1,651 @@ +/* $Id: raw2tiff.c,v 1.25 2010-03-10 18:56:49 bfriesen Exp $ + * + * Project: libtiff tools + * Purpose: Convert raw byte sequences in TIFF images + * Author: Andrey Kiselev, dron@ak4719.spb.edu + * + ****************************************************************************** + * Copyright (c) 2002, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include +#include +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#if HAVE_FCNTL_H +# include +#endif + +#if HAVE_SYS_TYPES_H +# include +#endif + +#if HAVE_IO_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +#ifndef HAVE_GETOPT +extern int getopt(int, char**, char*); +#endif + +#ifndef O_BINARY +# define O_BINARY 0 +#endif + +typedef enum { + PIXEL, + BAND +} InterleavingType; + +static uint16 compression = (uint16) -1; +static int jpegcolormode = JPEGCOLORMODE_RGB; +static int quality = 75; /* JPEG quality */ +static uint16 predictor = 0; + +static void swapBytesInScanline(void *, uint32, TIFFDataType); +static int guessSize(int, TIFFDataType, off_t, uint32, int, + uint32 *, uint32 *); +static double correlation(void *, void *, uint32, TIFFDataType); +static void usage(void); +static int processCompressOptions(char*); + +int +main(int argc, char* argv[]) +{ + uint32 width = 0, length = 0, linebytes, bufsize; + uint32 nbands = 1; /* number of bands in input image*/ + off_t hdr_size = 0; /* size of the header to skip */ + TIFFDataType dtype = TIFF_BYTE; + int16 depth = 1; /* bytes per pixel in input image */ + int swab = 0; /* byte swapping flag */ + InterleavingType interleaving = 0; /* interleaving type flag */ + uint32 rowsperstrip = (uint32) -1; + uint16 photometric = PHOTOMETRIC_MINISBLACK; + uint16 config = PLANARCONFIG_CONTIG; + uint16 fillorder = FILLORDER_LSB2MSB; + int fd; + char *outfilename = NULL; + TIFF *out; + + uint32 row, col, band; + int c; + unsigned char *buf = NULL, *buf1 = NULL; + extern int optind; + extern char* optarg; + + while ((c = getopt(argc, argv, "c:r:H:w:l:b:d:LMp:si:o:h")) != -1) { + switch (c) { + case 'c': /* compression scheme */ + if (!processCompressOptions(optarg)) + usage(); + break; + case 'r': /* rows/strip */ + rowsperstrip = atoi(optarg); + break; + case 'H': /* size of input image file header */ + hdr_size = atoi(optarg); + break; + case 'w': /* input image width */ + width = atoi(optarg); + break; + case 'l': /* input image length */ + length = atoi(optarg); + break; + case 'b': /* number of bands in input image */ + nbands = atoi(optarg); + break; + case 'd': /* type of samples in input image */ + if (strncmp(optarg, "byte", 4) == 0) + dtype = TIFF_BYTE; + else if (strncmp(optarg, "short", 5) == 0) + dtype = TIFF_SHORT; + else if (strncmp(optarg, "long", 4) == 0) + dtype = TIFF_LONG; + else if (strncmp(optarg, "sbyte", 5) == 0) + dtype = TIFF_SBYTE; + else if (strncmp(optarg, "sshort", 6) == 0) + dtype = TIFF_SSHORT; + else if (strncmp(optarg, "slong", 5) == 0) + dtype = TIFF_SLONG; + else if (strncmp(optarg, "float", 5) == 0) + dtype = TIFF_FLOAT; + else if (strncmp(optarg, "double", 6) == 0) + dtype = TIFF_DOUBLE; + else + dtype = TIFF_BYTE; + depth = TIFFDataWidth(dtype); + break; + case 'L': /* input has lsb-to-msb fillorder */ + fillorder = FILLORDER_LSB2MSB; + break; + case 'M': /* input has msb-to-lsb fillorder */ + fillorder = FILLORDER_MSB2LSB; + break; + case 'p': /* photometric interpretation */ + if (strncmp(optarg, "miniswhite", 10) == 0) + photometric = PHOTOMETRIC_MINISWHITE; + else if (strncmp(optarg, "minisblack", 10) == 0) + photometric = PHOTOMETRIC_MINISBLACK; + else if (strncmp(optarg, "rgb", 3) == 0) + photometric = PHOTOMETRIC_RGB; + else if (strncmp(optarg, "cmyk", 4) == 0) + photometric = PHOTOMETRIC_SEPARATED; + else if (strncmp(optarg, "ycbcr", 5) == 0) + photometric = PHOTOMETRIC_YCBCR; + else if (strncmp(optarg, "cielab", 6) == 0) + photometric = PHOTOMETRIC_CIELAB; + else if (strncmp(optarg, "icclab", 6) == 0) + photometric = PHOTOMETRIC_ICCLAB; + else if (strncmp(optarg, "itulab", 6) == 0) + photometric = PHOTOMETRIC_ITULAB; + else + photometric = PHOTOMETRIC_MINISBLACK; + break; + case 's': /* do we need to swap bytes? */ + swab = 1; + break; + case 'i': /* type of interleaving */ + if (strncmp(optarg, "pixel", 4) == 0) + interleaving = PIXEL; + else if (strncmp(optarg, "band", 6) == 0) + interleaving = BAND; + else + interleaving = 0; + break; + case 'o': + outfilename = optarg; + break; + case 'h': + usage(); + default: + break; + } + } + + if (argc - optind < 2) + usage(); + + fd = open(argv[optind], O_RDONLY|O_BINARY, 0); + if (fd < 0) { + fprintf(stderr, "%s: %s: Cannot open input file.\n", + argv[0], argv[optind]); + return (-1); + } + + if (guessSize(fd, dtype, hdr_size, nbands, swab, &width, &length) < 0) + return 1; + + if (outfilename == NULL) + outfilename = argv[optind+1]; + out = TIFFOpen(outfilename, "w"); + if (out == NULL) { + fprintf(stderr, "%s: %s: Cannot open file for output.\n", + argv[0], outfilename); + return (-1); + } + TIFFSetField(out, TIFFTAG_IMAGEWIDTH, width); + TIFFSetField(out, TIFFTAG_IMAGELENGTH, length); + TIFFSetField(out, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, nbands); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, depth * 8); + TIFFSetField(out, TIFFTAG_FILLORDER, fillorder); + TIFFSetField(out, TIFFTAG_PLANARCONFIG, config); + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, photometric); + switch (dtype) { + case TIFF_BYTE: + case TIFF_SHORT: + case TIFF_LONG: + TIFFSetField(out, TIFFTAG_SAMPLEFORMAT, SAMPLEFORMAT_UINT); + break; + case TIFF_SBYTE: + case TIFF_SSHORT: + case TIFF_SLONG: + TIFFSetField(out, TIFFTAG_SAMPLEFORMAT, SAMPLEFORMAT_INT); + break; + case TIFF_FLOAT: + case TIFF_DOUBLE: + TIFFSetField(out, TIFFTAG_SAMPLEFORMAT, SAMPLEFORMAT_IEEEFP); + break; + default: + TIFFSetField(out, TIFFTAG_SAMPLEFORMAT, SAMPLEFORMAT_VOID); + break; + } + if (compression == (uint16) -1) + compression = COMPRESSION_PACKBITS; + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + switch (compression) { + case COMPRESSION_JPEG: + if (photometric == PHOTOMETRIC_RGB + && jpegcolormode == JPEGCOLORMODE_RGB) + photometric = PHOTOMETRIC_YCBCR; + TIFFSetField(out, TIFFTAG_JPEGQUALITY, quality); + TIFFSetField(out, TIFFTAG_JPEGCOLORMODE, jpegcolormode); + break; + case COMPRESSION_LZW: + case COMPRESSION_DEFLATE: + if (predictor != 0) + TIFFSetField(out, TIFFTAG_PREDICTOR, predictor); + break; + } + switch(interleaving) { + case BAND: /* band interleaved data */ + linebytes = width * depth; + buf = (unsigned char *)_TIFFmalloc(linebytes); + break; + case PIXEL: /* pixel interleaved data */ + default: + linebytes = width * nbands * depth; + break; + } + bufsize = width * nbands * depth; + buf1 = (unsigned char *)_TIFFmalloc(bufsize); + + rowsperstrip = TIFFDefaultStripSize(out, rowsperstrip); + if (rowsperstrip > length) { + rowsperstrip = length; + } + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, rowsperstrip ); + + lseek(fd, hdr_size, SEEK_SET); /* Skip the file header */ + for (row = 0; row < length; row++) { + switch(interleaving) { + case BAND: /* band interleaved data */ + for (band = 0; band < nbands; band++) { + lseek(fd, + hdr_size + (length*band+row)*linebytes, + SEEK_SET); + if (read(fd, buf, linebytes) < 0) { + fprintf(stderr, + "%s: %s: scanline %lu: Read error.\n", + argv[0], argv[optind], + (unsigned long) row); + break; + } + if (swab) /* Swap bytes if needed */ + swapBytesInScanline(buf, width, dtype); + for (col = 0; col < width; col++) + memcpy(buf1 + (col*nbands+band)*depth, + buf + col * depth, depth); + } + break; + case PIXEL: /* pixel interleaved data */ + default: + if (read(fd, buf1, bufsize) < 0) { + fprintf(stderr, + "%s: %s: scanline %lu: Read error.\n", + argv[0], argv[optind], + (unsigned long) row); + break; + } + if (swab) /* Swap bytes if needed */ + swapBytesInScanline(buf1, width, dtype); + break; + } + + if (TIFFWriteScanline(out, buf1, row, 0) < 0) { + fprintf(stderr, "%s: %s: scanline %lu: Write error.\n", + argv[0], outfilename, (unsigned long) row); + break; + } + } + if (buf) + _TIFFfree(buf); + if (buf1) + _TIFFfree(buf1); + TIFFClose(out); + return (0); +} + +static void +swapBytesInScanline(void *buf, uint32 width, TIFFDataType dtype) +{ + switch (dtype) { + case TIFF_SHORT: + case TIFF_SSHORT: + TIFFSwabArrayOfShort((uint16*)buf, + (unsigned long)width); + break; + case TIFF_LONG: + case TIFF_SLONG: + TIFFSwabArrayOfLong((uint32*)buf, + (unsigned long)width); + break; + /* case TIFF_FLOAT: */ /* FIXME */ + case TIFF_DOUBLE: + TIFFSwabArrayOfDouble((double*)buf, + (unsigned long)width); + break; + default: + break; + } +} + +static int +guessSize(int fd, TIFFDataType dtype, off_t hdr_size, uint32 nbands, + int swab, uint32 *width, uint32 *length) +{ + const float longt = 40.0; /* maximum possible height/width ratio */ + char *buf1, *buf2; + struct stat filestat; + uint32 w, h, scanlinesize, imagesize; + uint32 depth = TIFFDataWidth(dtype); + float cor_coef = 0, tmp; + + fstat(fd, &filestat); + + if (filestat.st_size < hdr_size) { + fprintf(stderr, "Too large header size specified.\n"); + return -1; + } + + imagesize = (filestat.st_size - hdr_size) / nbands / depth; + + if (*width != 0 && *length == 0) { + fprintf(stderr, "Image height is not specified.\n"); + + *length = imagesize / *width; + + fprintf(stderr, "Height is guessed as %lu.\n", + (unsigned long)*length); + + return 1; + } else if (*width == 0 && *length != 0) { + fprintf(stderr, "Image width is not specified.\n"); + + *width = imagesize / *length; + + fprintf(stderr, "Width is guessed as %lu.\n", + (unsigned long)*width); + + return 1; + } else if (*width == 0 && *length == 0) { + fprintf(stderr, "Image width and height are not specified.\n"); + + for (w = (uint32) sqrt(imagesize / longt); + w < sqrt(imagesize * longt); + w++) { + if (imagesize % w == 0) { + scanlinesize = w * depth; + buf1 = _TIFFmalloc(scanlinesize); + buf2 = _TIFFmalloc(scanlinesize); + h = imagesize / w; + lseek(fd, hdr_size + (int)(h/2)*scanlinesize, + SEEK_SET); + read(fd, buf1, scanlinesize); + read(fd, buf2, scanlinesize); + if (swab) { + swapBytesInScanline(buf1, w, dtype); + swapBytesInScanline(buf2, w, dtype); + } + tmp = (float) fabs(correlation(buf1, buf2, + w, dtype)); + if (tmp > cor_coef) { + cor_coef = tmp; + *width = w, *length = h; + } + + _TIFFfree(buf1); + _TIFFfree(buf2); + } + } + + fprintf(stderr, + "Width is guessed as %lu, height is guessed as %lu.\n", + (unsigned long)*width, (unsigned long)*length); + + return 1; + } else { + if (filestat.st_size<(off_t)(hdr_size+(*width)*(*length)*nbands*depth)) { + fprintf(stderr, "Input file too small.\n"); + return -1; + } + } + + return 1; +} + +/* Calculate correlation coefficient between two numeric vectors */ +static double +correlation(void *buf1, void *buf2, uint32 n_elem, TIFFDataType dtype) +{ + double X, Y, M1 = 0.0, M2 = 0.0, D1 = 0.0, D2 = 0.0, K = 0.0; + uint32 i; + + switch (dtype) { + case TIFF_BYTE: + default: + for (i = 0; i < n_elem; i++) { + X = ((unsigned char *)buf1)[i]; + Y = ((unsigned char *)buf2)[i]; + M1 += X, M2 += Y; + D1 += X * X, D2 += Y * Y; + K += X * Y; + } + break; + case TIFF_SBYTE: + for (i = 0; i < n_elem; i++) { + X = ((signed char *)buf1)[i]; + Y = ((signed char *)buf2)[i]; + M1 += X, M2 += Y; + D1 += X * X, D2 += Y * Y; + K += X * Y; + } + break; + case TIFF_SHORT: + for (i = 0; i < n_elem; i++) { + X = ((uint16 *)buf1)[i]; + Y = ((uint16 *)buf2)[i]; + M1 += X, M2 += Y; + D1 += X * X, D2 += Y * Y; + K += X * Y; + } + break; + case TIFF_SSHORT: + for (i = 0; i < n_elem; i++) { + X = ((int16 *)buf1)[i]; + Y = ((int16 *)buf2)[i]; + M1 += X, M2 += Y; + D1 += X * X, D2 += Y * Y; + K += X * Y; + } + break; + case TIFF_LONG: + for (i = 0; i < n_elem; i++) { + X = ((uint32 *)buf1)[i]; + Y = ((uint32 *)buf2)[i]; + M1 += X, M2 += Y; + D1 += X * X, D2 += Y * Y; + K += X * Y; + } + break; + case TIFF_SLONG: + for (i = 0; i < n_elem; i++) { + X = ((int32 *)buf1)[i]; + Y = ((int32 *)buf2)[i]; + M1 += X, M2 += Y; + D1 += X * X, D2 += Y * Y; + K += X * Y; + } + break; + case TIFF_FLOAT: + for (i = 0; i < n_elem; i++) { + X = ((float *)buf1)[i]; + Y = ((float *)buf2)[i]; + M1 += X, M2 += Y; + D1 += X * X, D2 += Y * Y; + K += X * Y; + } + break; + case TIFF_DOUBLE: + for (i = 0; i < n_elem; i++) { + X = ((double *)buf1)[i]; + Y = ((double *)buf2)[i]; + M1 += X, M2 += Y; + D1 += X * X, D2 += Y * Y; + K += X * Y; + } + break; + } + + M1 /= n_elem; + M2 /= n_elem; + D1 -= M1 * M1 * n_elem; + D2 -= M2 * M2 * n_elem; + K = (K - M1 * M2 * n_elem) / sqrt(D1 * D2); + + return K; +} + +static int +processCompressOptions(char* opt) +{ + if (strcmp(opt, "none") == 0) + compression = COMPRESSION_NONE; + else if (strcmp(opt, "packbits") == 0) + compression = COMPRESSION_PACKBITS; + else if (strncmp(opt, "jpeg", 4) == 0) { + char* cp = strchr(opt, ':'); + + compression = COMPRESSION_JPEG; + while( cp ) + { + if (isdigit((int)cp[1])) + quality = atoi(cp+1); + else if (cp[1] == 'r' ) + jpegcolormode = JPEGCOLORMODE_RAW; + else + usage(); + + cp = strchr(cp+1,':'); + } + } else if (strncmp(opt, "lzw", 3) == 0) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_LZW; + } else if (strncmp(opt, "zip", 3) == 0) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_DEFLATE; + } else + return (0); + return (1); +} + +static char* stuff[] = { +"raw2tiff --- tool for converting raw byte sequences in TIFF images", +"usage: raw2tiff [options] input.raw output.tif", +"where options are:", +" -L input data has LSB2MSB bit order (default)", +" -M input data has MSB2LSB bit order", +" -r # make each strip have no more than # rows", +" -H # size of input image file header in bytes (0 by default)", +" -w # width of input image in pixels", +" -l # length of input image in lines", +" -b # number of bands in input image (1 by default)", +"", +" -d data_type type of samples in input image", +"where data_type may be:", +" byte 8-bit unsigned integer (default)", +" short 16-bit unsigned integer", +" long 32-bit unsigned integer", +" sbyte 8-bit signed integer", +" sshort 16-bit signed integer", +" slong 32-bit signed integer", +" float 32-bit IEEE floating point", +" double 64-bit IEEE floating point", +"", +" -p photo photometric interpretation (color space) of the input image", +"where photo may be:", +" miniswhite white color represented with 0 value", +" minisblack black color represented with 0 value (default)", +" rgb image has RGB color model", +" cmyk image has CMYK (separated) color model", +" ycbcr image has YCbCr color model", +" cielab image has CIE L*a*b color model", +" icclab image has ICC L*a*b color model", +" itulab image has ITU L*a*b color model", +"", +" -s swap bytes fetched from input file", +"", +" -i config type of samples interleaving in input image", +"where config may be:", +" pixel pixel interleaved data (default)", +" band band interleaved data", +"", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] compress output with deflate encoding", +" -c jpeg[:opts] compress output with JPEG encoding", +" -c packbits compress output with packbits encoding", +" -c none use no compression algorithm on output", +"", +"JPEG options:", +" # set compression quality level (0-100, default 75)", +" r output color image as RGB rather than YCbCr", +"For example, -c jpeg:r:50 to get JPEG-encoded RGB data with 50% comp. quality", +"", +"LZW and deflate options:", +" # set predictor value", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +" -o out.tif write output to out.tif", +" -h this help message", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/rgb2ycbcr.c b/src/SDL2/external/tiff-4.0.3/tools/rgb2ycbcr.c new file mode 100644 index 000000000..162aac10e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/rgb2ycbcr.c @@ -0,0 +1,390 @@ +/* $Id: rgb2ycbcr.c,v 1.14 2011-05-31 17:03:16 bfriesen Exp $ */ + +/* + * Copyright (c) 1991-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffiop.h" +#include "tiffio.h" + +#define streq(a,b) (strcmp(a,b) == 0) +#define CopyField(tag, v) \ + if (TIFFGetField(in, tag, &v)) TIFFSetField(out, tag, v) + +#ifndef howmany +#define howmany(x, y) (((x)+((y)-1))/(y)) +#endif +#define roundup(x, y) (howmany(x,y)*((uint32)(y))) + +#define LumaRed ycbcrCoeffs[0] +#define LumaGreen ycbcrCoeffs[1] +#define LumaBlue ycbcrCoeffs[2] + +uint16 compression = COMPRESSION_PACKBITS; +uint32 rowsperstrip = (uint32) -1; + +uint16 horizSubSampling = 2; /* YCbCr horizontal subsampling */ +uint16 vertSubSampling = 2; /* YCbCr vertical subsampling */ +float ycbcrCoeffs[3] = { .299F, .587F, .114F }; +/* default coding range is CCIR Rec 601-1 with no headroom/footroom */ +float refBlackWhite[6] = { 0.F, 255.F, 128.F, 255.F, 128.F, 255.F }; + +static int tiffcvt(TIFF* in, TIFF* out); +static void usage(int code); +static void setupLumaTables(void); + +int +main(int argc, char* argv[]) +{ + TIFF *in, *out; + int c; + extern int optind; + extern char *optarg; + + while ((c = getopt(argc, argv, "c:h:r:v:z")) != -1) + switch (c) { + case 'c': + if (streq(optarg, "none")) + compression = COMPRESSION_NONE; + else if (streq(optarg, "packbits")) + compression = COMPRESSION_PACKBITS; + else if (streq(optarg, "lzw")) + compression = COMPRESSION_LZW; + else if (streq(optarg, "jpeg")) + compression = COMPRESSION_JPEG; + else if (streq(optarg, "zip")) + compression = COMPRESSION_ADOBE_DEFLATE; + else + usage(-1); + break; + case 'h': + horizSubSampling = atoi(optarg); + break; + case 'v': + vertSubSampling = atoi(optarg); + break; + case 'r': + rowsperstrip = atoi(optarg); + break; + case 'z': /* CCIR Rec 601-1 w/ headroom/footroom */ + refBlackWhite[0] = 16.; + refBlackWhite[1] = 235.; + refBlackWhite[2] = 128.; + refBlackWhite[3] = 240.; + refBlackWhite[4] = 128.; + refBlackWhite[5] = 240.; + break; + case '?': + usage(0); + /*NOTREACHED*/ + } + if (argc - optind < 2) + usage(-1); + out = TIFFOpen(argv[argc-1], "w"); + if (out == NULL) + return (-2); + setupLumaTables(); + for (; optind < argc-1; optind++) { + in = TIFFOpen(argv[optind], "r"); + if (in != NULL) { + do { + if (!tiffcvt(in, out) || + !TIFFWriteDirectory(out)) { + (void) TIFFClose(out); + return (1); + } + } while (TIFFReadDirectory(in)); + (void) TIFFClose(in); + } + } + (void) TIFFClose(out); + return (0); +} + +float *lumaRed; +float *lumaGreen; +float *lumaBlue; +float D1, D2; +int Yzero; + +static float* +setupLuma(float c) +{ + float *v = (float *)_TIFFmalloc(256 * sizeof (float)); + int i; + for (i = 0; i < 256; i++) + v[i] = c * i; + return (v); +} + +static unsigned +V2Code(float f, float RB, float RW, int CR) +{ + unsigned int c = (unsigned int)((((f)*(RW-RB)/CR)+RB)+.5); + return (c > 255 ? 255 : c); +} + +static void +setupLumaTables(void) +{ + lumaRed = setupLuma(LumaRed); + lumaGreen = setupLuma(LumaGreen); + lumaBlue = setupLuma(LumaBlue); + D1 = 1.F/(2.F - 2.F*LumaBlue); + D2 = 1.F/(2.F - 2.F*LumaRed); + Yzero = V2Code(0, refBlackWhite[0], refBlackWhite[1], 255); +} + +static void +cvtClump(unsigned char* op, uint32* raster, uint32 ch, uint32 cw, uint32 w) +{ + float Y, Cb = 0, Cr = 0; + uint32 j, k; + /* + * Convert ch-by-cw block of RGB + * to YCbCr and sample accordingly. + */ + for (k = 0; k < ch; k++) { + for (j = 0; j < cw; j++) { + uint32 RGB = (raster - k*w)[j]; + Y = lumaRed[TIFFGetR(RGB)] + + lumaGreen[TIFFGetG(RGB)] + + lumaBlue[TIFFGetB(RGB)]; + /* accumulate chrominance */ + Cb += (TIFFGetB(RGB) - Y) * D1; + Cr += (TIFFGetR(RGB) - Y) * D2; + /* emit luminence */ + *op++ = V2Code(Y, + refBlackWhite[0], refBlackWhite[1], 255); + } + for (; j < horizSubSampling; j++) + *op++ = Yzero; + } + for (; k < vertSubSampling; k++) { + for (j = 0; j < horizSubSampling; j++) + *op++ = Yzero; + } + /* emit sampled chrominance values */ + *op++ = V2Code(Cb / (ch*cw), refBlackWhite[2], refBlackWhite[3], 127); + *op++ = V2Code(Cr / (ch*cw), refBlackWhite[4], refBlackWhite[5], 127); +} +#undef LumaRed +#undef LumaGreen +#undef LumaBlue +#undef V2Code + +/* + * Convert a strip of RGB data to YCbCr and + * sample to generate the output data. + */ +static void +cvtStrip(unsigned char* op, uint32* raster, uint32 nrows, uint32 width) +{ + uint32 x; + int clumpSize = vertSubSampling * horizSubSampling + 2; + uint32 *tp; + + for (; nrows >= vertSubSampling; nrows -= vertSubSampling) { + tp = raster; + for (x = width; x >= horizSubSampling; x -= horizSubSampling) { + cvtClump(op, tp, + vertSubSampling, horizSubSampling, width); + op += clumpSize; + tp += horizSubSampling; + } + if (x > 0) { + cvtClump(op, tp, vertSubSampling, x, width); + op += clumpSize; + } + raster -= vertSubSampling*width; + } + if (nrows > 0) { + tp = raster; + for (x = width; x >= horizSubSampling; x -= horizSubSampling) { + cvtClump(op, tp, nrows, horizSubSampling, width); + op += clumpSize; + tp += horizSubSampling; + } + if (x > 0) + cvtClump(op, tp, nrows, x, width); + } +} + +static int +cvtRaster(TIFF* tif, uint32* raster, uint32 width, uint32 height) +{ + uint32 y; + tstrip_t strip = 0; + tsize_t cc, acc; + unsigned char* buf; + uint32 rwidth = roundup(width, horizSubSampling); + uint32 rheight = roundup(height, vertSubSampling); + uint32 nrows = (rowsperstrip > rheight ? rheight : rowsperstrip); + uint32 rnrows = roundup(nrows,vertSubSampling); + + cc = rnrows*rwidth + + 2*((rnrows*rwidth) / (horizSubSampling*vertSubSampling)); + buf = (unsigned char*)_TIFFmalloc(cc); + // FIXME unchecked malloc + for (y = height; (int32) y > 0; y -= nrows) { + uint32 nr = (y > nrows ? nrows : y); + cvtStrip(buf, raster + (y-1)*width, nr, width); + nr = roundup(nr, vertSubSampling); + acc = nr*rwidth + + 2*((nr*rwidth)/(horizSubSampling*vertSubSampling)); + if (!TIFFWriteEncodedStrip(tif, strip++, buf, acc)) { + _TIFFfree(buf); + return (0); + } + } + _TIFFfree(buf); + return (1); +} + +static int +tiffcvt(TIFF* in, TIFF* out) +{ + uint32 width, height; /* image width & height */ + uint32* raster; /* retrieve RGBA image */ + uint16 shortv; + float floatv; + char *stringv; + uint32 longv; + int result; + size_t pixel_count; + + TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &width); + TIFFGetField(in, TIFFTAG_IMAGELENGTH, &height); + pixel_count = width * height; + + /* XXX: Check the integer overflow. */ + if (!width || !height || pixel_count / width != height) { + TIFFError(TIFFFileName(in), + "Malformed input file; " + "can't allocate buffer for raster of %lux%lu size", + (unsigned long)width, (unsigned long)height); + return 0; + } + + raster = (uint32*)_TIFFCheckMalloc(in, pixel_count, sizeof(uint32), + "raster buffer"); + if (raster == 0) { + TIFFError(TIFFFileName(in), + "Failed to allocate buffer (%lu elements of %lu each)", + (unsigned long)pixel_count, + (unsigned long)sizeof(uint32)); + return (0); + } + + if (!TIFFReadRGBAImage(in, width, height, raster, 0)) { + _TIFFfree(raster); + return (0); + } + + CopyField(TIFFTAG_SUBFILETYPE, longv); + TIFFSetField(out, TIFFTAG_IMAGEWIDTH, width); + TIFFSetField(out, TIFFTAG_IMAGELENGTH, height); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, 8); + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_YCBCR); + if (compression == COMPRESSION_JPEG) + TIFFSetField(out, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RAW); + CopyField(TIFFTAG_FILLORDER, shortv); + TIFFSetField(out, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, 3); + CopyField(TIFFTAG_XRESOLUTION, floatv); + CopyField(TIFFTAG_YRESOLUTION, floatv); + CopyField(TIFFTAG_RESOLUTIONUNIT, shortv); + TIFFSetField(out, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + { char buf[2048]; + char *cp = strrchr(TIFFFileName(in), '/'); + sprintf(buf, "YCbCr conversion of %s", cp ? cp+1 : TIFFFileName(in)); + TIFFSetField(out, TIFFTAG_IMAGEDESCRIPTION, buf); + } + TIFFSetField(out, TIFFTAG_SOFTWARE, TIFFGetVersion()); + CopyField(TIFFTAG_DOCUMENTNAME, stringv); + + TIFFSetField(out, TIFFTAG_REFERENCEBLACKWHITE, refBlackWhite); + TIFFSetField(out, TIFFTAG_YCBCRSUBSAMPLING, + horizSubSampling, vertSubSampling); + TIFFSetField(out, TIFFTAG_YCBCRPOSITIONING, YCBCRPOSITION_CENTERED); + TIFFSetField(out, TIFFTAG_YCBCRCOEFFICIENTS, ycbcrCoeffs); + rowsperstrip = TIFFDefaultStripSize(out, rowsperstrip); + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, rowsperstrip); + + result = cvtRaster(out, raster, width, height); + _TIFFfree(raster); + return result; +} + +char* stuff[] = { + "usage: rgb2ycbcr [-c comp] [-r rows] [-h N] [-v N] input... output\n", + "where comp is one of the following compression algorithms:\n", + " jpeg\t\tJPEG encoding\n", + " lzw\t\tLempel-Ziv & Welch encoding\n", + " zip\t\tdeflate encoding\n", + " packbits\tPackBits encoding (default)\n", + " none\t\tno compression\n", + "and the other options are:\n", + " -r\trows/strip\n", + " -h\thorizontal sampling factor (1,2,4)\n", + " -v\tvertical sampling factor (1,2,4)\n", + NULL +}; + +static void +usage(int code) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(code); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/sgi2tiff.c b/src/SDL2/external/tiff-4.0.3/tools/sgi2tiff.c new file mode 100644 index 000000000..227e62107 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/sgi2tiff.c @@ -0,0 +1,335 @@ +/* $Id: sgi2tiff.c,v 1.6 2010-03-10 18:56:49 bfriesen Exp $ */ + +/* + * Copyright (c) 1991-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include + +#include "tiffio.h" + +#define streq(a,b) (strcmp(a,b) == 0) +#define strneq(a,b,n) (strncmp(a,b,n) == 0) + +static short config = PLANARCONFIG_CONTIG; +static uint16 compression = COMPRESSION_PACKBITS; +static uint16 predictor = 0; +static uint16 fillorder = 0; +static uint32 rowsperstrip = (uint32) -1; +static int jpegcolormode = JPEGCOLORMODE_RGB; +static int quality = 75; /* JPEG quality */ +static uint16 photometric; + +static void usage(void); +static int cpContig(IMAGE*, TIFF*); +static int cpSeparate(IMAGE*, TIFF*); +static int processCompressOptions(char*); + +/* XXX image library has no prototypes */ +extern IMAGE* iopen(const char*, const char*); +extern void iclose(IMAGE*); +extern void getrow(IMAGE*, short*, int, int); + +int +main(int argc, char* argv[]) +{ + IMAGE *in; + TIFF *out; + int c; + extern int optind; + extern char* optarg; + + while ((c = getopt(argc, argv, "c:p:r:")) != -1) + switch (c) { + case 'c': /* compression scheme */ + if (!processCompressOptions(optarg)) + usage(); + break; + case 'f': /* fill order */ + if (streq(optarg, "lsb2msb")) + fillorder = FILLORDER_LSB2MSB; + else if (streq(optarg, "msb2lsb")) + fillorder = FILLORDER_MSB2LSB; + else + usage(); + break; + case 'p': /* planar configuration */ + if (streq(optarg, "separate")) + config = PLANARCONFIG_SEPARATE; + else if (streq(optarg, "contig")) + config = PLANARCONFIG_CONTIG; + else + usage(); + break; + case 'r': /* rows/strip */ + rowsperstrip = atoi(optarg); + break; + case '?': + usage(); + /*NOTREACHED*/ + } + if (argc - optind != 2) + usage(); + in = iopen(argv[optind], "r"); + if (in == NULL) + return (-1); + out = TIFFOpen(argv[optind+1], "w"); + if (out == NULL) + return (-2); + TIFFSetField(out, TIFFTAG_IMAGEWIDTH, (uint32) in->xsize); + TIFFSetField(out, TIFFTAG_IMAGELENGTH, (uint32) in->ysize); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, 8); + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + if (in->zsize == 1) + photometric = PHOTOMETRIC_MINISBLACK; + else + photometric = PHOTOMETRIC_RGB; + switch (compression) { + case COMPRESSION_JPEG: + if (photometric == PHOTOMETRIC_RGB && jpegcolormode == JPEGCOLORMODE_RGB) + photometric = PHOTOMETRIC_YCBCR; + TIFFSetField(out, TIFFTAG_JPEGQUALITY, quality); + TIFFSetField(out, TIFFTAG_JPEGCOLORMODE, jpegcolormode); + break; + case COMPRESSION_LZW: + case COMPRESSION_DEFLATE: + if (predictor != 0) + TIFFSetField(out, TIFFTAG_PREDICTOR, predictor); + break; + } + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, photometric); + if (fillorder != 0) + TIFFSetField(out, TIFFTAG_FILLORDER, fillorder); + TIFFSetField(out, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, in->zsize); + if (in->zsize > 3) { + uint16 v[1]; + v[0] = EXTRASAMPLE_UNASSALPHA; + TIFFSetField(out, TIFFTAG_EXTRASAMPLES, 1, v); + } + TIFFSetField(out, TIFFTAG_MINSAMPLEVALUE, (uint16) in->min); + TIFFSetField(out, TIFFTAG_MAXSAMPLEVALUE, (uint16) in->max); + TIFFSetField(out, TIFFTAG_PLANARCONFIG, config); + if (config != PLANARCONFIG_SEPARATE) + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, + TIFFDefaultStripSize(out, rowsperstrip)); + else /* force 1 row/strip for library limitation */ + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, 1L); + if (in->name[0] != '\0') + TIFFSetField(out, TIFFTAG_IMAGEDESCRIPTION, in->name); + if (config == PLANARCONFIG_CONTIG) + cpContig(in, out); + else + cpSeparate(in, out); + (void) iclose(in); + (void) TIFFClose(out); + return (0); +} + +static int +processCompressOptions(char* opt) +{ + if (streq(opt, "none")) + compression = COMPRESSION_NONE; + else if (streq(opt, "packbits")) + compression = COMPRESSION_PACKBITS; + else if (strneq(opt, "jpeg", 4)) { + char* cp = strchr(opt, ':'); + + defcompression = COMPRESSION_JPEG; + while( cp ) + { + if (isdigit((int)cp[1])) + quality = atoi(cp+1); + else if (cp[1] == 'r' ) + jpegcolormode = JPEGCOLORMODE_RAW; + else + usage(); + + cp = strchr(cp+1,':'); + } + } else if (strneq(opt, "lzw", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_LZW; + } else if (strneq(opt, "zip", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_DEFLATE; + } else + return (0); + return (1); +} + +static int +cpContig(IMAGE* in, TIFF* out) +{ + tdata_t buf = _TIFFmalloc(TIFFScanlineSize(out)); + short *r = NULL; + int x, y; + + if (in->zsize == 3) { + short *g, *b; + + r = (short *)_TIFFmalloc(3 * in->xsize * sizeof (short)); + g = r + in->xsize; + b = g + in->xsize; + for (y = in->ysize-1; y >= 0; y--) { + uint8* pp = (uint8*) buf; + + getrow(in, r, y, 0); + getrow(in, g, y, 1); + getrow(in, b, y, 2); + for (x = 0; x < in->xsize; x++) { + pp[0] = r[x]; + pp[1] = g[x]; + pp[2] = b[x]; + pp += 3; + } + if (TIFFWriteScanline(out, buf, in->ysize-y-1, 0) < 0) + goto bad; + } + } else if (in->zsize == 4) { + short *g, *b, *a; + + r = (short *)_TIFFmalloc(4 * in->xsize * sizeof (short)); + g = r + in->xsize; + b = g + in->xsize; + a = b + in->xsize; + for (y = in->ysize-1; y >= 0; y--) { + uint8* pp = (uint8*) buf; + + getrow(in, r, y, 0); + getrow(in, g, y, 1); + getrow(in, b, y, 2); + getrow(in, a, y, 3); + for (x = 0; x < in->xsize; x++) { + pp[0] = r[x]; + pp[1] = g[x]; + pp[2] = b[x]; + pp[3] = a[x]; + pp += 4; + } + if (TIFFWriteScanline(out, buf, in->ysize-y-1, 0) < 0) + goto bad; + } + } else { + uint8* pp = (uint8*) buf; + + r = (short *)_TIFFmalloc(in->xsize * sizeof (short)); + for (y = in->ysize-1; y >= 0; y--) { + getrow(in, r, y, 0); + for (x = in->xsize-1; x >= 0; x--) + pp[x] = r[x]; + if (TIFFWriteScanline(out, buf, in->ysize-y-1, 0) < 0) + goto bad; + } + } + if (r) + _TIFFfree(r); + _TIFFfree(buf); + return (1); +bad: + if (r) + _TIFFfree(r); + _TIFFfree(buf); + return (0); +} + +static int +cpSeparate(IMAGE* in, TIFF* out) +{ + tdata_t buf = _TIFFmalloc(TIFFScanlineSize(out)); + short *r = (short *)_TIFFmalloc(in->xsize * sizeof (short)); + uint8* pp = (uint8*) buf; + int x, y, z; + + for (z = 0; z < in->zsize; z++) { + for (y = in->ysize-1; y >= 0; y--) { + getrow(in, r, y, z); + for (x = 0; x < in->xsize; x++) + pp[x] = r[x]; + if (TIFFWriteScanline(out, buf, in->ysize-y-1, z) < 0) + goto bad; + } + } + _TIFFfree(r); + _TIFFfree(buf); + return (1); +bad: + _TIFFfree(r); + _TIFFfree(buf); + return (0); +} + +char* stuff[] = { +"usage: sgi2tiff [options] input.rgb output.tif", +"where options are:", +" -r # make each strip have no more than # rows", +"", +" -p contig pack samples contiguously (e.g. RGBRGB...)", +" -p separate store samples separately (e.g. RRR...GGG...BBB...)", +"", +" -f lsb2msb force lsb-to-msb FillOrder for output", +" -f msb2lsb force msb-to-lsb FillOrder for output", +"", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] compress output with deflate encoding", +" -c jpeg[:opts]compress output with JPEG encoding", +" -c packbits compress output with packbits encoding", +" -c none use no compression algorithm on output", +"", +"JPEG options:", +" # set compression quality level (0-100, default 75)", +" r output color image as RGB rather than YCbCr", +"", +"LZW and deflate options:", +" # set predictor value", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/sgisv.c b/src/SDL2/external/tiff-4.0.3/tools/sgisv.c new file mode 100644 index 000000000..e0d91e06f --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/sgisv.c @@ -0,0 +1,316 @@ +/* $Id: sgisv.c,v 1.6 2010-03-10 18:56:49 bfriesen Exp $ */ + +/* + * Copyright (c) 1990-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include +#include +#include + +#include +#include + +#include "tiffio.h" + +typedef unsigned char unsigned char; +typedef unsigned long uint32; + +#define streq(a,b) (strcmp(a,b) == 0) +#define strneq(a,b,n) (strncmp(a,b,n) == 0) + +uint32 rowsperstrip = (uint32) -1; +uint16 compression = COMPRESSION_PACKBITS; +uint16 config = PLANARCONFIG_CONTIG; +uint16 predictor = 0; +int xmaxscreen; +int ymaxscreen; +uint16 photometric = PHOTOMETRIC_RGB; +int jpegcolormode = JPEGCOLORMODE_RGB; +int quality = 75; /* JPEG quality */ + +static void usage(void); +static void tiffsv(char*, int, int, int, int); + +int +main(int argc, char* argv[]) +{ + int c; + extern int optind; + extern char* optarg; + + while ((c = getopt(argc, argv, "c:p:r:")) != -1) + switch (c) { + case 'b': /* save as b&w */ + photometric = PHOTOMETRIC_MINISBLACK; + break; + case 'c': /* compression scheme */ + if (streq(optarg, "none")) + compression = COMPRESSION_NONE; + else if (streq(optarg, "packbits")) + compression = COMPRESSION_PACKBITS; + else if (strneq(optarg, "jpeg", 4)) { + char* cp = strchr(optarg, ':'); + if (cp && isdigit(cp[1])) + quality = atoi(cp+1); + if (cp && strchr(cp, 'r')) + jpegcolormode = JPEGCOLORMODE_RAW; + compression = COMPRESSION_JPEG; + } else if (strneq(optarg, "lzw", 3)) { + char* cp = strchr(optarg, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_LZW; + } else + usage(); + break; + case 'p': /* planar configuration */ + if (streq(optarg, "separate")) + config = PLANARCONFIG_SEPARATE; + else if (streq(optarg, "contig")) + config = PLANARCONFIG_CONTIG; + else + usage(); + break; + case 'r': /* rows/strip */ + rowsperstrip = atoi(optarg); + break; + case '?': + usage(); + /*NOTREACHED*/ + } + if (argc - optind != 1 && argc - optind != 5) + usage(); + xmaxscreen = getgdesc(GD_XPMAX)-1; + ymaxscreen = getgdesc(GD_YPMAX)-1; + foreground(); + noport(); + winopen("tiffsv"); + if (argc - optind == 5) + tiffsv(argv[optind], + atoi(argv[optind+1]), atoi(argv[optind+2]), + atoi(argv[optind+3]), atoi(argv[optind+4])); + else + tiffsv(argv[optind], 0, xmaxscreen, 0, ymaxscreen); + return (0); +} + +char* stuff[] = { +"usage: tiffsv [options] outimage.tif [x1 x2 y1 y2] [-b]", +"where options are:", +" -p contig pack samples contiguously (e.g. RGBRGB...)", +" -p separate store samples separately (e.g. RRR...GGG...BBB...)", +"", +" -r # make each strip have no more than # rows", +"", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c jpeg[:opts]compress output with JPEG encoding", +" -c packbits compress output with packbits encoding", +" -c none use no compression algorithm on output", +"", +"JPEG options:", +" # set compression quality level (0-100, default 75)", +" r output color image as RGB rather than YCbCr", +"", +"LZW options:", +" # set predictor value for Lempel-Ziv & Welch encoding", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +static void +svRGBSeparate(TIFF* tif, uint32* ss, int xsize, int ysize) +{ + tsize_t stripsize = TIFFStripSize(tif); + unsigned char *rbuf = (unsigned char *)_TIFFmalloc(3*stripsize); + unsigned char *gbuf = rbuf + stripsize; + unsigned char *bbuf = gbuf + stripsize; + register int y; + + for (y = 0; y <= ysize; y += rowsperstrip) { + unsigned char *rp, *gp, *bp; + register int x; + register uint32 n; + + n = rowsperstrip; + if (n > ysize-y+1) + n = ysize-y+1; + rp = rbuf; gp = gbuf; bp = bbuf; + do { + for (x = 0; x <= xsize; x++) { + uint32 v = ss[x]; + rp[x] = v; + gp[x] = v >> 8; + bp[x] = v >> 16; + } + rp += xsize+1, gp += xsize+1, bp += xsize+1; + ss += xsize+1; + } while (--n); + if (TIFFWriteEncodedStrip(tif, TIFFComputeStrip(tif,y,0), + rbuf, stripsize) < 0) + break; + if (TIFFWriteEncodedStrip(tif, TIFFComputeStrip(tif,y,1), + gbuf, stripsize) < 0) + break; + if (TIFFWriteEncodedStrip(tif, TIFFComputeStrip(tif,y,2), + bbuf, stripsize) < 0) + break; + } + _TIFFfree(rbuf); +} + +static void +svRGBContig(TIFF* tif, uint32* ss, int xsize, int ysize) +{ + register int x, y; + tsize_t stripsize = TIFFStripSize(tif); + unsigned char *strip = (unsigned char *)_TIFFmalloc(stripsize); + + for (y = 0; y <= ysize; y += rowsperstrip) { + register unsigned char *pp = strip; + register uint32 n; + + n = rowsperstrip; + if (n > ysize-y+1) + n = ysize-y+1; + do { + for (x = 0; x <= xsize; x++) { + uint32 v = ss[x]; + pp[0] = v; + pp[1] = v >> 8; + pp[2] = v >> 16; + pp += 3; + } + ss += xsize+1; + } while (--n); + if (TIFFWriteEncodedStrip(tif, TIFFComputeStrip(tif,y,0), + strip, stripsize) < 0) + break; + } + _TIFFfree(strip); +} + +#undef RED +#undef GREEN +#undef BLUE +#define CVT(x) (((x)*255)/100) +#define RED CVT(28) /* 28% */ +#define GREEN CVT(59) /* 59% */ +#define BLUE CVT(11) /* 11% */ + +static void +svGrey(TIFF* tif, uint32* ss, int xsize, int ysize) +{ + register int x, y; + unsigned char *buf = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(tif)); + + for (y = 0; y <= ysize; y++) { + for (x = 0; x <= xsize; x++) { + unsigned char *cp = (unsigned char *)&ss[x]; + buf[x] = (RED*cp[3] + GREEN*cp[2] + BLUE*cp[1]) >> 8; + } + if (TIFFWriteScanline(tif, buf, (uint32) y, 0) < 0) + break; + ss += xsize+1; + } + _TIFFfree(buf); +} + +#define MIN(a,b) ((a)<(b)?(a):(b)) +#define ABS(x) ((x)<0?-(x):(x)) + +static void +tiffsv(char* name, int x1, int x2, int y1, int y2) +{ + TIFF *tif; + int xsize, ysize; + int xorg, yorg; + uint32 *scrbuf; + + xorg = MIN(x1,x2); + yorg = MIN(y1,y2); + if (xorg<0) + xorg = 0; + if (yorg<0) + yorg = 0; + xsize = ABS(x2-x1); + ysize = ABS(y2-y1); + if (xorg+xsize > xmaxscreen) + xsize = xmaxscreen-xorg; + if (yorg+ysize > ymaxscreen) + ysize = ymaxscreen-yorg; + tif = TIFFOpen(name, "w"); + TIFFSetField(tif, TIFFTAG_IMAGEWIDTH, (uint32) (xsize+1)); + TIFFSetField(tif, TIFFTAG_IMAGELENGTH, (uint32) (ysize+1)); + TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 8); + TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, + photometric == PHOTOMETRIC_RGB ? 3 : 1); + TIFFSetField(tif, TIFFTAG_PLANARCONFIG, config); + TIFFSetField(tif, TIFFTAG_COMPRESSION, compression); + switch (compression) { + case COMPRESSION_JPEG: + if (photometric == PHOTOMETRIC_RGB && jpegcolormode == JPEGCOLORMODE_RGB) + photometric = PHOTOMETRIC_YCBCR; + TIFFSetField(tif, TIFFTAG_JPEGQUALITY, quality); + TIFFSetField(tif, TIFFTAG_JPEGCOLORMODE, jpegcolormode); + break; + case COMPRESSION_LZW: + if (predictor != 0) + TIFFSetField(tif, TIFFTAG_PREDICTOR, predictor); + break; + } + TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, photometric); + TIFFSetField(tif, TIFFTAG_ORIENTATION, ORIENTATION_BOTLEFT); + rowsperstrip = TIFFDefaultStripSize(tif, rowsperstrip); + TIFFSetField(tif, TIFFTAG_ROWSPERSTRIP, rowsperstrip); + scrbuf = (uint32 *)_TIFFmalloc((xsize+1)*(ysize+1)*sizeof (uint32)); + readdisplay(xorg, yorg, xorg+xsize, yorg+ysize, scrbuf, RD_FREEZE); + if (photometric == PHOTOMETRIC_RGB) { + if (config == PLANARCONFIG_SEPARATE) + svRGBSeparate(tif, scrbuf, xsize, ysize); + else + svRGBContig(tif, scrbuf, xsize, ysize); + } else + svGrey(tif, scrbuf, xsize, ysize); + (void) TIFFClose(tif); + _TIFFfree((char *)scrbuf); +} +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/thumbnail.c b/src/SDL2/external/tiff-4.0.3/tools/thumbnail.c new file mode 100644 index 000000000..fd1cba575 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/thumbnail.c @@ -0,0 +1,659 @@ +/* $Id: thumbnail.c,v 1.16 2010-07-02 12:02:56 dron Exp $ */ + +/* + * Copyright (c) 1994-1997 Sam Leffler + * Copyright (c) 1994-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +#ifndef HAVE_GETOPT +extern int getopt(int, char**, char*); +#endif + +#define streq(a,b) (strcmp(a,b) == 0) + +#ifndef TIFFhowmany8 +# define TIFFhowmany8(x) (((x)&0x07)?((uint32)(x)>>3)+1:(uint32)(x)>>3) +#endif + +typedef enum { + EXP50, + EXP60, + EXP70, + EXP80, + EXP90, + EXP, + LINEAR +} Contrast; + +static uint32 tnw = 216; /* thumbnail width */ +static uint32 tnh = 274; /* thumbnail height */ +static Contrast contrast = LINEAR; /* current contrast */ +static uint8* thumbnail; + +static int cpIFD(TIFF*, TIFF*); +static int generateThumbnail(TIFF*, TIFF*); +static void initScale(); +static void usage(void); + +extern char* optarg; +extern int optind; + +int +main(int argc, char* argv[]) +{ + TIFF* in; + TIFF* out; + int c; + + while ((c = getopt(argc, argv, "w:h:c:")) != -1) { + switch (c) { + case 'w': tnw = strtoul(optarg, NULL, 0); break; + case 'h': tnh = strtoul(optarg, NULL, 0); break; + case 'c': contrast = streq(optarg, "exp50") ? EXP50 : + streq(optarg, "exp60") ? EXP60 : + streq(optarg, "exp70") ? EXP70 : + streq(optarg, "exp80") ? EXP80 : + streq(optarg, "exp90") ? EXP90 : + streq(optarg, "exp") ? EXP : + streq(optarg, "linear")? LINEAR : + EXP; + break; + default: usage(); + } + } + if (argc-optind != 2) + usage(); + + out = TIFFOpen(argv[optind+1], "w"); + if (out == NULL) + return 2; + in = TIFFOpen(argv[optind], "r"); + if( in == NULL ) + return 2; + + thumbnail = (uint8*) _TIFFmalloc(tnw * tnh); + if (!thumbnail) { + TIFFError(TIFFFileName(in), + "Can't allocate space for thumbnail buffer."); + return 1; + } + + if (in != NULL) { + initScale(); + do { + if (!generateThumbnail(in, out)) + goto bad; + if (!cpIFD(in, out) || !TIFFWriteDirectory(out)) + goto bad; + } while (TIFFReadDirectory(in)); + (void) TIFFClose(in); + } + (void) TIFFClose(out); + return 0; +bad: + (void) TIFFClose(out); + return 1; +} + +#define CopyField(tag, v) \ + if (TIFFGetField(in, tag, &v)) TIFFSetField(out, tag, v) +#define CopyField2(tag, v1, v2) \ + if (TIFFGetField(in, tag, &v1, &v2)) TIFFSetField(out, tag, v1, v2) +#define CopyField3(tag, v1, v2, v3) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3)) TIFFSetField(out, tag, v1, v2, v3) +#define CopyField4(tag, v1, v2, v3, v4) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3, &v4)) TIFFSetField(out, tag, v1, v2, v3, v4) + +static void +cpTag(TIFF* in, TIFF* out, uint16 tag, uint16 count, TIFFDataType type) +{ + switch (type) { + case TIFF_SHORT: + if (count == 1) { + uint16 shortv; + CopyField(tag, shortv); + } else if (count == 2) { + uint16 shortv1, shortv2; + CopyField2(tag, shortv1, shortv2); + } else if (count == 4) { + uint16 *tr, *tg, *tb, *ta; + CopyField4(tag, tr, tg, tb, ta); + } else if (count == (uint16) -1) { + uint16 shortv1; + uint16* shortav; + CopyField2(tag, shortv1, shortav); + } + break; + case TIFF_LONG: + { uint32 longv; + CopyField(tag, longv); + } + break; + case TIFF_LONG8: + { uint64 longv8; + CopyField(tag, longv8); + } + break; + case TIFF_SLONG8: + { int64 longv8; + CopyField(tag, longv8); + } + break; + case TIFF_RATIONAL: + if (count == 1) { + float floatv; + CopyField(tag, floatv); + } else if (count == (uint16) -1) { + float* floatav; + CopyField(tag, floatav); + } + break; + case TIFF_ASCII: + { char* stringv; + CopyField(tag, stringv); + } + break; + case TIFF_DOUBLE: + if (count == 1) { + double doublev; + CopyField(tag, doublev); + } else if (count == (uint16) -1) { + double* doubleav; + CopyField(tag, doubleav); + } + break; + case TIFF_IFD8: + { toff_t ifd8; + CopyField(tag, ifd8); + } + break; default: + TIFFError(TIFFFileName(in), + "Data type %d is not supported, tag %d skipped.", + tag, type); + } +} + +#undef CopyField4 +#undef CopyField3 +#undef CopyField2 +#undef CopyField + +static struct cpTag { + uint16 tag; + uint16 count; + TIFFDataType type; +} tags[] = { + { TIFFTAG_IMAGEWIDTH, 1, TIFF_LONG }, + { TIFFTAG_IMAGELENGTH, 1, TIFF_LONG }, + { TIFFTAG_BITSPERSAMPLE, 1, TIFF_SHORT }, + { TIFFTAG_COMPRESSION, 1, TIFF_SHORT }, + { TIFFTAG_FILLORDER, 1, TIFF_SHORT }, + { TIFFTAG_SAMPLESPERPIXEL, 1, TIFF_SHORT }, + { TIFFTAG_ROWSPERSTRIP, 1, TIFF_LONG }, + { TIFFTAG_PLANARCONFIG, 1, TIFF_SHORT }, + { TIFFTAG_GROUP3OPTIONS, 1, TIFF_LONG }, + { TIFFTAG_SUBFILETYPE, 1, TIFF_LONG }, + { TIFFTAG_PHOTOMETRIC, 1, TIFF_SHORT }, + { TIFFTAG_THRESHHOLDING, 1, TIFF_SHORT }, + { TIFFTAG_DOCUMENTNAME, 1, TIFF_ASCII }, + { TIFFTAG_IMAGEDESCRIPTION, 1, TIFF_ASCII }, + { TIFFTAG_MAKE, 1, TIFF_ASCII }, + { TIFFTAG_MODEL, 1, TIFF_ASCII }, + { TIFFTAG_ORIENTATION, 1, TIFF_SHORT }, + { TIFFTAG_MINSAMPLEVALUE, 1, TIFF_SHORT }, + { TIFFTAG_MAXSAMPLEVALUE, 1, TIFF_SHORT }, + { TIFFTAG_XRESOLUTION, 1, TIFF_RATIONAL }, + { TIFFTAG_YRESOLUTION, 1, TIFF_RATIONAL }, + { TIFFTAG_PAGENAME, 1, TIFF_ASCII }, + { TIFFTAG_XPOSITION, 1, TIFF_RATIONAL }, + { TIFFTAG_YPOSITION, 1, TIFF_RATIONAL }, + { TIFFTAG_GROUP4OPTIONS, 1, TIFF_LONG }, + { TIFFTAG_RESOLUTIONUNIT, 1, TIFF_SHORT }, + { TIFFTAG_PAGENUMBER, 2, TIFF_SHORT }, + { TIFFTAG_SOFTWARE, 1, TIFF_ASCII }, + { TIFFTAG_DATETIME, 1, TIFF_ASCII }, + { TIFFTAG_ARTIST, 1, TIFF_ASCII }, + { TIFFTAG_HOSTCOMPUTER, 1, TIFF_ASCII }, + { TIFFTAG_WHITEPOINT, 2, TIFF_RATIONAL }, + { TIFFTAG_PRIMARYCHROMATICITIES, (uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_HALFTONEHINTS, 2, TIFF_SHORT }, + { TIFFTAG_BADFAXLINES, 1, TIFF_LONG }, + { TIFFTAG_CLEANFAXDATA, 1, TIFF_SHORT }, + { TIFFTAG_CONSECUTIVEBADFAXLINES, 1, TIFF_LONG }, + { TIFFTAG_INKSET, 1, TIFF_SHORT }, + { TIFFTAG_INKNAMES, 1, TIFF_ASCII }, + { TIFFTAG_DOTRANGE, 2, TIFF_SHORT }, + { TIFFTAG_TARGETPRINTER, 1, TIFF_ASCII }, + { TIFFTAG_SAMPLEFORMAT, 1, TIFF_SHORT }, + { TIFFTAG_YCBCRCOEFFICIENTS, (uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_YCBCRSUBSAMPLING, 2, TIFF_SHORT }, + { TIFFTAG_YCBCRPOSITIONING, 1, TIFF_SHORT }, + { TIFFTAG_REFERENCEBLACKWHITE, (uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_EXTRASAMPLES, (uint16) -1, TIFF_SHORT }, +}; +#define NTAGS (sizeof (tags) / sizeof (tags[0])) + +static void +cpTags(TIFF* in, TIFF* out) +{ + struct cpTag *p; + for (p = tags; p < &tags[NTAGS]; p++) + cpTag(in, out, p->tag, p->count, p->type); +} +#undef NTAGS + +static int +cpStrips(TIFF* in, TIFF* out) +{ + tsize_t bufsize = TIFFStripSize(in); + unsigned char *buf = (unsigned char *)_TIFFmalloc(bufsize); + + if (buf) { + tstrip_t s, ns = TIFFNumberOfStrips(in); + uint64 *bytecounts; + + TIFFGetField(in, TIFFTAG_STRIPBYTECOUNTS, &bytecounts); + for (s = 0; s < ns; s++) { + if (bytecounts[s] > (uint64) bufsize) { + buf = (unsigned char *)_TIFFrealloc(buf, (tmsize_t)bytecounts[s]); + if (!buf) + goto bad; + bufsize = (tmsize_t)bytecounts[s]; + } + if (TIFFReadRawStrip(in, s, buf, (tmsize_t)bytecounts[s]) < 0 || + TIFFWriteRawStrip(out, s, buf, (tmsize_t)bytecounts[s]) < 0) { + _TIFFfree(buf); + return 0; + } + } + _TIFFfree(buf); + return 1; + } + +bad: + TIFFError(TIFFFileName(in), + "Can't allocate space for strip buffer."); + return 0; +} + +static int +cpTiles(TIFF* in, TIFF* out) +{ + tsize_t bufsize = TIFFTileSize(in); + unsigned char *buf = (unsigned char *)_TIFFmalloc(bufsize); + + if (buf) { + ttile_t t, nt = TIFFNumberOfTiles(in); + uint64 *bytecounts; + + TIFFGetField(in, TIFFTAG_TILEBYTECOUNTS, &bytecounts); + for (t = 0; t < nt; t++) { + if (bytecounts[t] > (uint64) bufsize) { + buf = (unsigned char *)_TIFFrealloc(buf, (tmsize_t)bytecounts[t]); + if (!buf) + goto bad; + bufsize = (tmsize_t)bytecounts[t]; + } + if (TIFFReadRawTile(in, t, buf, (tmsize_t)bytecounts[t]) < 0 || + TIFFWriteRawTile(out, t, buf, (tmsize_t)bytecounts[t]) < 0) { + _TIFFfree(buf); + return 0; + } + } + _TIFFfree(buf); + return 1; + } + +bad: + TIFFError(TIFFFileName(in), + "Can't allocate space for tile buffer."); + return (0); +} + +static int +cpIFD(TIFF* in, TIFF* out) +{ + cpTags(in, out); + if (TIFFIsTiled(in)) { + if (!cpTiles(in, out)) + return (0); + } else { + if (!cpStrips(in, out)) + return (0); + } + return (1); +} + +static uint16 photometric; /* current photometric of raster */ +static uint16 filterWidth; /* filter width in pixels */ +static uint32 stepSrcWidth; /* src image stepping width */ +static uint32 stepDstWidth; /* dest stepping width */ +static uint8* src0; /* horizontal bit stepping (start) */ +static uint8* src1; /* horizontal bit stepping (middle) */ +static uint8* src2; /* horizontal bit stepping (end) */ +static uint32* rowoff; /* row offset for stepping */ +static uint8 cmap[256]; /* colormap indexes */ +static uint8 bits[256]; /* count of bits set */ + +static void +setupBitsTables() +{ + int i; + for (i = 0; i < 256; i++) { + int n = 0; + if (i&0x01) n++; + if (i&0x02) n++; + if (i&0x04) n++; + if (i&0x08) n++; + if (i&0x10) n++; + if (i&0x20) n++; + if (i&0x40) n++; + if (i&0x80) n++; + bits[i] = n; + } +} + +static int clamp(float v, int low, int high) + { return (v < low ? low : v > high ? high : (int)v); } + +#ifndef M_E +#define M_E 2.7182818284590452354 +#endif + +static void +expFill(float pct[], uint32 p, uint32 n) +{ + uint32 i; + uint32 c = (p * n) / 100; + for (i = 1; i < c; i++) + pct[i] = (float) (1-exp(i/((double)(n-1)))/ M_E); + for (; i < n; i++) + pct[i] = 0.; +} + +static void +setupCmap() +{ + float pct[256]; /* known to be large enough */ + uint32 i; + pct[0] = 1; /* force white */ + switch (contrast) { + case EXP50: expFill(pct, 50, 256); break; + case EXP60: expFill(pct, 60, 256); break; + case EXP70: expFill(pct, 70, 256); break; + case EXP80: expFill(pct, 80, 256); break; + case EXP90: expFill(pct, 90, 256); break; + case EXP: expFill(pct, 100, 256); break; + case LINEAR: + for (i = 1; i < 256; i++) + pct[i] = 1-((float)i)/(256-1); + break; + } + switch (photometric) { + case PHOTOMETRIC_MINISWHITE: + for (i = 0; i < 256; i++) + cmap[i] = clamp(255*pct[(256-1)-i], 0, 255); + break; + case PHOTOMETRIC_MINISBLACK: + for (i = 0; i < 256; i++) + cmap[i] = clamp(255*pct[i], 0, 255); + break; + } +} + +static void +initScale() +{ + src0 = (uint8*) _TIFFmalloc(sizeof (uint8) * tnw); + src1 = (uint8*) _TIFFmalloc(sizeof (uint8) * tnw); + src2 = (uint8*) _TIFFmalloc(sizeof (uint8) * tnw); + rowoff = (uint32*) _TIFFmalloc(sizeof (uint32) * tnw); + filterWidth = 0; + stepDstWidth = stepSrcWidth = 0; + setupBitsTables(); +} + +/* + * Calculate the horizontal accumulation parameteres + * according to the widths of the src and dst images. + */ +static void +setupStepTables(uint32 sw) +{ + if (stepSrcWidth != sw || stepDstWidth != tnw) { + int step = sw; + int limit = tnw; + int err = 0; + uint32 sx = 0; + uint32 x; + int fw; + uint8 b; + for (x = 0; x < tnw; x++) { + uint32 sx0 = sx; + err += step; + while (err >= limit) { + err -= limit; + sx++; + } + rowoff[x] = sx0 >> 3; + fw = sx - sx0; /* width */ + b = (fw < 8) ? 0xff<<(8-fw) : 0xff; + src0[x] = b >> (sx0&7); + fw -= 8 - (sx0&7); + if (fw < 0) + fw = 0; + src1[x] = fw >> 3; + fw -= (fw>>3)<<3; + src2[x] = 0xff << (8-fw); + } + stepSrcWidth = sw; + stepDstWidth = tnw; + } +} + +static void +setrow(uint8* row, uint32 nrows, const uint8* rows[]) +{ + uint32 x; + uint32 area = nrows * filterWidth; + for (x = 0; x < tnw; x++) { + uint32 mask0 = src0[x]; + uint32 fw = src1[x]; + uint32 mask1 = src1[x]; + uint32 off = rowoff[x]; + uint32 acc = 0; + uint32 y, i; + for (y = 0; y < nrows; y++) { + const uint8* src = rows[y] + off; + acc += bits[*src++ & mask0]; + switch (fw) { + default: + for (i = fw; i > 8; i--) + acc += bits[*src++]; + /* fall thru... */ + case 8: acc += bits[*src++]; + case 7: acc += bits[*src++]; + case 6: acc += bits[*src++]; + case 5: acc += bits[*src++]; + case 4: acc += bits[*src++]; + case 3: acc += bits[*src++]; + case 2: acc += bits[*src++]; + case 1: acc += bits[*src++]; + case 0: break; + } + acc += bits[*src & mask1]; + } + *row++ = cmap[(255*acc)/area]; + } +} + +/* + * Install the specified image. The + * image is resized to fit the display page using + * a box filter. The resultant pixels are mapped + * with a user-selectable contrast curve. + */ +static void +setImage1(const uint8* br, uint32 rw, uint32 rh) +{ + int step = rh; + int limit = tnh; + int err = 0; + int bpr = TIFFhowmany8(rw); + int sy = 0; + uint8* row = thumbnail; + uint32 dy; + for (dy = 0; dy < tnh; dy++) { + const uint8* rows[256]; + uint32 nrows = 1; + fprintf(stderr, "bpr=%d, sy=%d, bpr*sy=%d\n", bpr, sy, bpr*sy); + rows[0] = br + bpr*sy; + err += step; + while (err >= limit) { + err -= limit; + sy++; + if (err >= limit) + rows[nrows++] = br + bpr*sy; + } + setrow(row, nrows, rows); + row += tnw; + } +} + +static void +setImage(const uint8* br, uint32 rw, uint32 rh) +{ + filterWidth = (uint16) ceil((double) rw / (double) tnw); + setupStepTables(rw); + setImage1(br, rw, rh); +} + +static int +generateThumbnail(TIFF* in, TIFF* out) +{ + unsigned char* raster; + unsigned char* rp; + uint32 sw, sh, rps; + uint16 bps, spp; + tsize_t rowsize, rastersize; + tstrip_t s, ns = TIFFNumberOfStrips(in); + toff_t diroff[1]; + + TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &sw); + TIFFGetField(in, TIFFTAG_IMAGELENGTH, &sh); + TIFFGetFieldDefaulted(in, TIFFTAG_BITSPERSAMPLE, &bps); + TIFFGetFieldDefaulted(in, TIFFTAG_SAMPLESPERPIXEL, &spp); + TIFFGetFieldDefaulted(in, TIFFTAG_ROWSPERSTRIP, &rps); + if (spp != 1 || bps != 1) + return 0; + rowsize = TIFFScanlineSize(in); + rastersize = sh * rowsize; + fprintf(stderr, "rastersize=%u\n", (unsigned int)rastersize); + raster = (unsigned char*)_TIFFmalloc(rastersize); + if (!raster) { + TIFFError(TIFFFileName(in), + "Can't allocate space for raster buffer."); + return 0; + } + rp = raster; + for (s = 0; s < ns; s++) { + (void) TIFFReadEncodedStrip(in, s, rp, -1); + rp += rps * rowsize; + } + TIFFGetField(in, TIFFTAG_PHOTOMETRIC, &photometric); + setupCmap(); + setImage(raster, sw, sh); + _TIFFfree(raster); + + TIFFSetField(out, TIFFTAG_SUBFILETYPE, FILETYPE_REDUCEDIMAGE); + TIFFSetField(out, TIFFTAG_IMAGEWIDTH, (uint32) tnw); + TIFFSetField(out, TIFFTAG_IMAGELENGTH, (uint32) tnh); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, (uint16) 8); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, (uint16) 1); + TIFFSetField(out, TIFFTAG_COMPRESSION, COMPRESSION_PACKBITS); + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_MINISWHITE); + TIFFSetField(out, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + TIFFSetField(out, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT); + cpTag(in, out, TIFFTAG_SOFTWARE, (uint16) -1, TIFF_ASCII); + cpTag(in, out, TIFFTAG_IMAGEDESCRIPTION, (uint16) -1, TIFF_ASCII); + cpTag(in, out, TIFFTAG_DATETIME, (uint16) -1, TIFF_ASCII); + cpTag(in, out, TIFFTAG_HOSTCOMPUTER, (uint16) -1, TIFF_ASCII); + diroff[0] = 0UL; + TIFFSetField(out, TIFFTAG_SUBIFD, 1, diroff); + return (TIFFWriteEncodedStrip(out, 0, thumbnail, tnw*tnh) != -1 && + TIFFWriteDirectory(out) != -1); +} + +char* stuff[] = { +"usage: thumbnail [options] input.tif output.tif", +"where options are:", +" -h # specify thumbnail image height (default is 274)", +" -w # specify thumbnail image width (default is 216)", +"", +" -c linear use linear contrast curve", +" -c exp50 use 50% exponential contrast curve", +" -c exp60 use 60% exponential contrast curve", +" -c exp70 use 70% exponential contrast curve", +" -c exp80 use 80% exponential contrast curve", +" -c exp90 use 90% exponential contrast curve", +" -c exp use pure exponential contrast curve", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiff2bw.c b/src/SDL2/external/tiff-4.0.3/tools/tiff2bw.c new file mode 100644 index 000000000..bda754a0a --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiff2bw.c @@ -0,0 +1,471 @@ +/* $Id: tiff2bw.c,v 1.15 2010-07-02 12:02:56 dron Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +#define streq(a,b) (strcmp((a),(b)) == 0) +#define strneq(a,b,n) (strncmp(a,b,n) == 0) + +/* x% weighting -> fraction of full color */ +#define PCT(x) (((x)*255+127)/100) +int RED = PCT(30); /* 30% */ +int GREEN = PCT(59); /* 59% */ +int BLUE = PCT(11); /* 11% */ + +static void usage(void); +static int processCompressOptions(char*); + +static void +compresscontig(unsigned char* out, unsigned char* rgb, uint32 n) +{ + register int v, red = RED, green = GREEN, blue = BLUE; + + while (n-- > 0) { + v = red*(*rgb++); + v += green*(*rgb++); + v += blue*(*rgb++); + *out++ = v>>8; + } +} + +static void +compresssep(unsigned char* out, + unsigned char* r, unsigned char* g, unsigned char* b, uint32 n) +{ + register uint32 red = RED, green = GREEN, blue = BLUE; + + while (n-- > 0) + *out++ = (unsigned char) + ((red*(*r++) + green*(*g++) + blue*(*b++)) >> 8); +} + +static int +checkcmap(TIFF* tif, int n, uint16* r, uint16* g, uint16* b) +{ + while (n-- > 0) + if (*r++ >= 256 || *g++ >= 256 || *b++ >= 256) + return (16); + TIFFWarning(TIFFFileName(tif), "Assuming 8-bit colormap"); + return (8); +} + +static void +compresspalette(unsigned char* out, unsigned char* data, uint32 n, uint16* rmap, uint16* gmap, uint16* bmap) +{ + register int v, red = RED, green = GREEN, blue = BLUE; + + while (n-- > 0) { + unsigned int ix = *data++; + v = red*rmap[ix]; + v += green*gmap[ix]; + v += blue*bmap[ix]; + *out++ = v>>8; + } +} + +static uint16 compression = (uint16) -1; +static uint16 predictor = 0; +static int jpegcolormode = JPEGCOLORMODE_RGB; +static int quality = 75; /* JPEG quality */ + +static void cpTags(TIFF* in, TIFF* out); + +int +main(int argc, char* argv[]) +{ + uint32 rowsperstrip = (uint32) -1; + TIFF *in, *out; + uint32 w, h; + uint16 samplesperpixel; + uint16 bitspersample; + uint16 config; + uint16 photometric; + uint16* red; + uint16* green; + uint16* blue; + tsize_t rowsize; + register uint32 row; + register tsample_t s; + unsigned char *inbuf, *outbuf; + char thing[1024]; + int c; + extern int optind; + extern char *optarg; + + while ((c = getopt(argc, argv, "c:r:R:G:B:")) != -1) + switch (c) { + case 'c': /* compression scheme */ + if (!processCompressOptions(optarg)) + usage(); + break; + case 'r': /* rows/strip */ + rowsperstrip = atoi(optarg); + break; + case 'R': + RED = PCT(atoi(optarg)); + break; + case 'G': + GREEN = PCT(atoi(optarg)); + break; + case 'B': + BLUE = PCT(atoi(optarg)); + break; + case '?': + usage(); + /*NOTREACHED*/ + } + if (argc - optind < 2) + usage(); + in = TIFFOpen(argv[optind], "r"); + if (in == NULL) + return (-1); + photometric = 0; + TIFFGetField(in, TIFFTAG_PHOTOMETRIC, &photometric); + if (photometric != PHOTOMETRIC_RGB && photometric != PHOTOMETRIC_PALETTE ) { + fprintf(stderr, + "%s: Bad photometric; can only handle RGB and Palette images.\n", + argv[optind]); + return (-1); + } + TIFFGetField(in, TIFFTAG_SAMPLESPERPIXEL, &samplesperpixel); + if (samplesperpixel != 1 && samplesperpixel != 3) { + fprintf(stderr, "%s: Bad samples/pixel %u.\n", + argv[optind], samplesperpixel); + return (-1); + } + TIFFGetField(in, TIFFTAG_BITSPERSAMPLE, &bitspersample); + if (bitspersample != 8) { + fprintf(stderr, + " %s: Sorry, only handle 8-bit samples.\n", argv[optind]); + return (-1); + } + TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &w); + TIFFGetField(in, TIFFTAG_IMAGELENGTH, &h); + TIFFGetField(in, TIFFTAG_PLANARCONFIG, &config); + + out = TIFFOpen(argv[optind+1], "w"); + if (out == NULL) + return (-1); + TIFFSetField(out, TIFFTAG_IMAGEWIDTH, w); + TIFFSetField(out, TIFFTAG_IMAGELENGTH, h); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, 8); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, 1); + TIFFSetField(out, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + cpTags(in, out); + if (compression != (uint16) -1) { + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + switch (compression) { + case COMPRESSION_JPEG: + TIFFSetField(out, TIFFTAG_JPEGQUALITY, quality); + TIFFSetField(out, TIFFTAG_JPEGCOLORMODE, jpegcolormode); + break; + case COMPRESSION_LZW: + case COMPRESSION_DEFLATE: + if (predictor != 0) + TIFFSetField(out, TIFFTAG_PREDICTOR, predictor); + break; + } + } + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_MINISBLACK); + sprintf(thing, "B&W version of %s", argv[optind]); + TIFFSetField(out, TIFFTAG_IMAGEDESCRIPTION, thing); + TIFFSetField(out, TIFFTAG_SOFTWARE, "tiff2bw"); + outbuf = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(out)); + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, + TIFFDefaultStripSize(out, rowsperstrip)); + +#define pack(a,b) ((a)<<8 | (b)) + switch (pack(photometric, config)) { + case pack(PHOTOMETRIC_PALETTE, PLANARCONFIG_CONTIG): + case pack(PHOTOMETRIC_PALETTE, PLANARCONFIG_SEPARATE): + TIFFGetField(in, TIFFTAG_COLORMAP, &red, &green, &blue); + /* + * Convert 16-bit colormap to 8-bit (unless it looks + * like an old-style 8-bit colormap). + */ + if (checkcmap(in, 1<= 0; i--) { + red[i] = CVT(red[i]); + green[i] = CVT(green[i]); + blue[i] = CVT(blue[i]); + } +#undef CVT + } + inbuf = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(in)); + for (row = 0; row < h; row++) { + if (TIFFReadScanline(in, inbuf, row, 0) < 0) + break; + compresspalette(outbuf, inbuf, w, red, green, blue); + if (TIFFWriteScanline(out, outbuf, row, 0) < 0) + break; + } + break; + case pack(PHOTOMETRIC_RGB, PLANARCONFIG_CONTIG): + inbuf = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(in)); + for (row = 0; row < h; row++) { + if (TIFFReadScanline(in, inbuf, row, 0) < 0) + break; + compresscontig(outbuf, inbuf, w); + if (TIFFWriteScanline(out, outbuf, row, 0) < 0) + break; + } + break; + case pack(PHOTOMETRIC_RGB, PLANARCONFIG_SEPARATE): + rowsize = TIFFScanlineSize(in); + inbuf = (unsigned char *)_TIFFmalloc(3*rowsize); + for (row = 0; row < h; row++) { + for (s = 0; s < 3; s++) + if (TIFFReadScanline(in, + inbuf+s*rowsize, row, s) < 0) + return (-1); + compresssep(outbuf, + inbuf, inbuf+rowsize, inbuf+2*rowsize, w); + if (TIFFWriteScanline(out, outbuf, row, 0) < 0) + break; + } + break; + } +#undef pack + TIFFClose(out); + return (0); +} + +static int +processCompressOptions(char* opt) +{ + if (streq(opt, "none")) + compression = COMPRESSION_NONE; + else if (streq(opt, "packbits")) + compression = COMPRESSION_PACKBITS; + else if (strneq(opt, "jpeg", 4)) { + char* cp = strchr(opt, ':'); + + compression = COMPRESSION_JPEG; + while( cp ) + { + if (isdigit((int)cp[1])) + quality = atoi(cp+1); + else if (cp[1] == 'r' ) + jpegcolormode = JPEGCOLORMODE_RAW; + else + usage(); + + cp = strchr(cp+1,':'); + } + } else if (strneq(opt, "lzw", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_LZW; + } else if (strneq(opt, "zip", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_DEFLATE; + } else + return (0); + return (1); +} + +#define CopyField(tag, v) \ + if (TIFFGetField(in, tag, &v)) TIFFSetField(out, tag, v) +#define CopyField2(tag, v1, v2) \ + if (TIFFGetField(in, tag, &v1, &v2)) TIFFSetField(out, tag, v1, v2) +#define CopyField3(tag, v1, v2, v3) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3)) TIFFSetField(out, tag, v1, v2, v3) +#define CopyField4(tag, v1, v2, v3, v4) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3, &v4)) TIFFSetField(out, tag, v1, v2, v3, v4) + +static void +cpTag(TIFF* in, TIFF* out, uint16 tag, uint16 count, TIFFDataType type) +{ + switch (type) { + case TIFF_SHORT: + if (count == 1) { + uint16 shortv; + CopyField(tag, shortv); + } else if (count == 2) { + uint16 shortv1, shortv2; + CopyField2(tag, shortv1, shortv2); + } else if (count == 4) { + uint16 *tr, *tg, *tb, *ta; + CopyField4(tag, tr, tg, tb, ta); + } else if (count == (uint16) -1) { + uint16 shortv1; + uint16* shortav; + CopyField2(tag, shortv1, shortav); + } + break; + case TIFF_LONG: + { uint32 longv; + CopyField(tag, longv); + } + break; + case TIFF_RATIONAL: + if (count == 1) { + float floatv; + CopyField(tag, floatv); + } else if (count == (uint16) -1) { + float* floatav; + CopyField(tag, floatav); + } + break; + case TIFF_ASCII: + { char* stringv; + CopyField(tag, stringv); + } + break; + case TIFF_DOUBLE: + if (count == 1) { + double doublev; + CopyField(tag, doublev); + } else if (count == (uint16) -1) { + double* doubleav; + CopyField(tag, doubleav); + } + break; + default: + TIFFError(TIFFFileName(in), + "Data type %d is not supported, tag %d skipped.", + tag, type); + } +} + +#undef CopyField4 +#undef CopyField3 +#undef CopyField2 +#undef CopyField + +static struct cpTag { + uint16 tag; + uint16 count; + TIFFDataType type; +} tags[] = { + { TIFFTAG_SUBFILETYPE, 1, TIFF_LONG }, + { TIFFTAG_THRESHHOLDING, 1, TIFF_SHORT }, + { TIFFTAG_DOCUMENTNAME, 1, TIFF_ASCII }, + { TIFFTAG_IMAGEDESCRIPTION, 1, TIFF_ASCII }, + { TIFFTAG_MAKE, 1, TIFF_ASCII }, + { TIFFTAG_MODEL, 1, TIFF_ASCII }, + { TIFFTAG_MINSAMPLEVALUE, 1, TIFF_SHORT }, + { TIFFTAG_MAXSAMPLEVALUE, 1, TIFF_SHORT }, + { TIFFTAG_XRESOLUTION, 1, TIFF_RATIONAL }, + { TIFFTAG_YRESOLUTION, 1, TIFF_RATIONAL }, + { TIFFTAG_PAGENAME, 1, TIFF_ASCII }, + { TIFFTAG_XPOSITION, 1, TIFF_RATIONAL }, + { TIFFTAG_YPOSITION, 1, TIFF_RATIONAL }, + { TIFFTAG_RESOLUTIONUNIT, 1, TIFF_SHORT }, + { TIFFTAG_SOFTWARE, 1, TIFF_ASCII }, + { TIFFTAG_DATETIME, 1, TIFF_ASCII }, + { TIFFTAG_ARTIST, 1, TIFF_ASCII }, + { TIFFTAG_HOSTCOMPUTER, 1, TIFF_ASCII }, + { TIFFTAG_WHITEPOINT, 2, TIFF_RATIONAL }, + { TIFFTAG_PRIMARYCHROMATICITIES,(uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_HALFTONEHINTS, 2, TIFF_SHORT }, + { TIFFTAG_INKSET, 1, TIFF_SHORT }, + { TIFFTAG_DOTRANGE, 2, TIFF_SHORT }, + { TIFFTAG_TARGETPRINTER, 1, TIFF_ASCII }, + { TIFFTAG_SAMPLEFORMAT, 1, TIFF_SHORT }, + { TIFFTAG_YCBCRCOEFFICIENTS, (uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_YCBCRSUBSAMPLING, 2, TIFF_SHORT }, + { TIFFTAG_YCBCRPOSITIONING, 1, TIFF_SHORT }, + { TIFFTAG_REFERENCEBLACKWHITE, (uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_EXTRASAMPLES, (uint16) -1, TIFF_SHORT }, + { TIFFTAG_SMINSAMPLEVALUE, 1, TIFF_DOUBLE }, + { TIFFTAG_SMAXSAMPLEVALUE, 1, TIFF_DOUBLE }, + { TIFFTAG_STONITS, 1, TIFF_DOUBLE }, +}; +#define NTAGS (sizeof (tags) / sizeof (tags[0])) + +static void +cpTags(TIFF* in, TIFF* out) +{ + struct cpTag *p; + for (p = tags; p < &tags[NTAGS]; p++) + cpTag(in, out, p->tag, p->count, p->type); +} +#undef NTAGS + +char* stuff[] = { +"usage: tiff2bw [options] input.tif output.tif", +"where options are:", +" -R % use #% from red channel", +" -G % use #% from green channel", +" -B % use #% from blue channel", +"", +" -r # make each strip have no more than # rows", +"", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] compress output with deflate encoding", +" -c packbits compress output with packbits encoding", +" -c g3[:opts] compress output with CCITT Group 3 encoding", +" -c g4 compress output with CCITT Group 4 encoding", +" -c none use no compression algorithm on output", +"", +"LZW and deflate options:", +" # set predictor value", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiff2pdf.c b/src/SDL2/external/tiff-4.0.3/tools/tiff2pdf.c new file mode 100644 index 000000000..356328c17 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiff2pdf.c @@ -0,0 +1,5388 @@ +/* $Id: tiff2pdf.c,v 1.69 2012-07-19 15:43:41 tgl Exp $ + * + * tiff2pdf - converts a TIFF image to a PDF document + * + * Copyright (c) 2003 Ross Finlayson + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the name of + * Ross Finlayson may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Ross Finlayson. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL ROSS FINLAYSON BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include +#include +#include +#include + +#if HAVE_UNISTD_H +# include +#endif + +#ifdef HAVE_FCNTL_H +# include +#endif + +#ifdef HAVE_IO_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffiop.h" +#include "tiffio.h" + +#ifndef HAVE_GETOPT +extern int getopt(int, char**, char*); +#endif + +#ifndef EXIT_SUCCESS +# define EXIT_SUCCESS 0 +#endif +#ifndef EXIT_FAILURE +# define EXIT_FAILURE 1 +#endif + +#define TIFF2PDF_MODULE "tiff2pdf" + +#define PS_UNIT_SIZE 72.0F + +/* This type is of PDF color spaces. */ +typedef enum { + T2P_CS_BILEVEL = 0x01, /* Bilevel, black and white */ + T2P_CS_GRAY = 0x02, /* Single channel */ + T2P_CS_RGB = 0x04, /* Three channel tristimulus RGB */ + T2P_CS_CMYK = 0x08, /* Four channel CMYK print inkset */ + T2P_CS_LAB = 0x10, /* Three channel L*a*b* color space */ + T2P_CS_PALETTE = 0x1000,/* One of the above with a color map */ + T2P_CS_CALGRAY = 0x20, /* Calibrated single channel */ + T2P_CS_CALRGB = 0x40, /* Calibrated three channel tristimulus RGB */ + T2P_CS_ICCBASED = 0x80 /* ICC profile color specification */ +} t2p_cs_t; + +/* This type is of PDF compression types. */ +typedef enum{ + T2P_COMPRESS_NONE=0x00 +#ifdef CCITT_SUPPORT + , T2P_COMPRESS_G4=0x01 +#endif +#if defined(JPEG_SUPPORT) || defined(OJPEG_SUPPORT) + , T2P_COMPRESS_JPEG=0x02 +#endif +#ifdef ZIP_SUPPORT + , T2P_COMPRESS_ZIP=0x04 +#endif +} t2p_compress_t; + +/* This type is whether TIFF image data can be used in PDF without transcoding. */ +typedef enum{ + T2P_TRANSCODE_RAW=0x01, /* The raw data from the input can be used without recompressing */ + T2P_TRANSCODE_ENCODE=0x02 /* The data from the input is perhaps unencoded and reencoded */ +} t2p_transcode_t; + +/* This type is of information about the data samples of the input image. */ +typedef enum{ + T2P_SAMPLE_NOTHING=0x0000, /* The unencoded samples are normal for the output colorspace */ + T2P_SAMPLE_ABGR_TO_RGB=0x0001, /* The unencoded samples are the result of ReadRGBAImage */ + T2P_SAMPLE_RGBA_TO_RGB=0x0002, /* The unencoded samples are contiguous RGBA */ + T2P_SAMPLE_RGBAA_TO_RGB=0x0004, /* The unencoded samples are RGBA with premultiplied alpha */ + T2P_SAMPLE_YCBCR_TO_RGB=0x0008, + T2P_SAMPLE_YCBCR_TO_LAB=0x0010, + T2P_SAMPLE_REALIZE_PALETTE=0x0020, /* The unencoded samples are indexes into the color map */ + T2P_SAMPLE_SIGNED_TO_UNSIGNED=0x0040, /* The unencoded samples are signed instead of unsignd */ + T2P_SAMPLE_LAB_SIGNED_TO_UNSIGNED=0x0040, /* The L*a*b* samples have a* and b* signed */ + T2P_SAMPLE_PLANAR_SEPARATE_TO_CONTIG=0x0100 /* The unencoded samples are separate instead of contiguous */ +} t2p_sample_t; + +/* This type is of error status of the T2P struct. */ +typedef enum{ + T2P_ERR_OK = 0, /* This is the value of t2p->t2p_error when there is no error */ + T2P_ERR_ERROR = 1 /* This is the value of t2p->t2p_error when there was an error */ +} t2p_err_t; + +/* This struct defines a logical page of a TIFF. */ +typedef struct { + tdir_t page_directory; + uint32 page_number; + ttile_t page_tilecount; + uint32 page_extra; +} T2P_PAGE; + +/* This struct defines a PDF rectangle's coordinates. */ +typedef struct { + float x1; + float y1; + float x2; + float y2; + float mat[9]; +} T2P_BOX; + +/* This struct defines a tile of a PDF. */ +typedef struct { + T2P_BOX tile_box; +} T2P_TILE; + +/* This struct defines information about the tiles on a PDF page. */ +typedef struct { + ttile_t tiles_tilecount; + uint32 tiles_tilewidth; + uint32 tiles_tilelength; + uint32 tiles_tilecountx; + uint32 tiles_tilecounty; + uint32 tiles_edgetilewidth; + uint32 tiles_edgetilelength; + T2P_TILE* tiles_tiles; +} T2P_TILES; + +/* This struct is the context of a function to generate PDF from a TIFF. */ +typedef struct { + t2p_err_t t2p_error; + T2P_PAGE* tiff_pages; + T2P_TILES* tiff_tiles; + tdir_t tiff_pagecount; + uint16 tiff_compression; + uint16 tiff_photometric; + uint16 tiff_fillorder; + uint16 tiff_bitspersample; + uint16 tiff_samplesperpixel; + uint16 tiff_planar; + uint32 tiff_width; + uint32 tiff_length; + float tiff_xres; + float tiff_yres; + uint16 tiff_orientation; + toff_t tiff_dataoffset; + tsize_t tiff_datasize; + uint16 tiff_resunit; + uint16 pdf_centimeters; + uint16 pdf_overrideres; + uint16 pdf_overridepagesize; + float pdf_defaultxres; + float pdf_defaultyres; + float pdf_xres; + float pdf_yres; + float pdf_defaultpagewidth; + float pdf_defaultpagelength; + float pdf_pagewidth; + float pdf_pagelength; + float pdf_imagewidth; + float pdf_imagelength; + int pdf_image_fillpage; /* 0 (default: no scaling, 1:scale imagesize to pagesize */ + T2P_BOX pdf_mediabox; + T2P_BOX pdf_imagebox; + uint16 pdf_majorversion; + uint16 pdf_minorversion; + uint32 pdf_catalog; + uint32 pdf_pages; + uint32 pdf_info; + uint32 pdf_palettecs; + uint16 pdf_fitwindow; + uint32 pdf_startxref; +#define TIFF2PDF_FILEID_SIZE 33 + char pdf_fileid[TIFF2PDF_FILEID_SIZE]; +#define TIFF2PDF_DATETIME_SIZE 17 + char pdf_datetime[TIFF2PDF_DATETIME_SIZE]; +#define TIFF2PDF_CREATOR_SIZE 512 + char pdf_creator[TIFF2PDF_CREATOR_SIZE]; +#define TIFF2PDF_AUTHOR_SIZE 512 + char pdf_author[TIFF2PDF_AUTHOR_SIZE]; +#define TIFF2PDF_TITLE_SIZE 512 + char pdf_title[TIFF2PDF_TITLE_SIZE]; +#define TIFF2PDF_SUBJECT_SIZE 512 + char pdf_subject[TIFF2PDF_SUBJECT_SIZE]; +#define TIFF2PDF_KEYWORDS_SIZE 512 + char pdf_keywords[TIFF2PDF_KEYWORDS_SIZE]; + t2p_cs_t pdf_colorspace; + uint16 pdf_colorspace_invert; + uint16 pdf_switchdecode; + uint16 pdf_palettesize; + unsigned char* pdf_palette; + int pdf_labrange[4]; + t2p_compress_t pdf_defaultcompression; + uint16 pdf_defaultcompressionquality; + t2p_compress_t pdf_compression; + uint16 pdf_compressionquality; + uint16 pdf_nopassthrough; + t2p_transcode_t pdf_transcode; + t2p_sample_t pdf_sample; + uint32* pdf_xrefoffsets; + uint32 pdf_xrefcount; + tdir_t pdf_page; +#ifdef OJPEG_SUPPORT + tdata_t pdf_ojpegdata; + uint32 pdf_ojpegdatalength; + uint32 pdf_ojpegiflength; +#endif + float tiff_whitechromaticities[2]; + float tiff_primarychromaticities[6]; + float tiff_referenceblackwhite[2]; + float* tiff_transferfunction[3]; + int pdf_image_interpolate; /* 0 (default) : do not interpolate, + 1 : interpolate */ + uint16 tiff_transferfunctioncount; + uint32 pdf_icccs; + uint32 tiff_iccprofilelength; + tdata_t tiff_iccprofile; + + /* fields for custom read/write procedures */ + FILE *outputfile; + int outputdisable; + tsize_t outputwritten; +} T2P; + +/* These functions are called by main. */ + +void tiff2pdf_usage(void); +int tiff2pdf_match_paper_size(float*, float*, char*); + +/* These functions are used to generate a PDF from a TIFF. */ + +#ifdef __cplusplus +extern "C" { +#endif + +T2P* t2p_init(void); +void t2p_validate(T2P*); +tsize_t t2p_write_pdf(T2P*, TIFF*, TIFF*); +void t2p_free(T2P*); + +#ifdef __cplusplus +} +#endif + +void t2p_read_tiff_init(T2P*, TIFF*); +int t2p_cmp_t2p_page(const void*, const void*); +void t2p_read_tiff_data(T2P*, TIFF*); +void t2p_read_tiff_size(T2P*, TIFF*); +void t2p_read_tiff_size_tile(T2P*, TIFF*, ttile_t); +int t2p_tile_is_right_edge(T2P_TILES, ttile_t); +int t2p_tile_is_bottom_edge(T2P_TILES, ttile_t); +int t2p_tile_is_edge(T2P_TILES, ttile_t); +int t2p_tile_is_corner_edge(T2P_TILES, ttile_t); +tsize_t t2p_readwrite_pdf_image(T2P*, TIFF*, TIFF*); +tsize_t t2p_readwrite_pdf_image_tile(T2P*, TIFF*, TIFF*, ttile_t); +#ifdef OJPEG_SUPPORT +int t2p_process_ojpeg_tables(T2P*, TIFF*); +#endif +#ifdef JPEG_SUPPORT +int t2p_process_jpeg_strip(unsigned char*, tsize_t*, unsigned char*, tsize_t*, tstrip_t, uint32); +#endif +void t2p_tile_collapse_left(tdata_t, tsize_t, uint32, uint32, uint32); +void t2p_write_advance_directory(T2P*, TIFF*); +tsize_t t2p_sample_planar_separate_to_contig(T2P*, unsigned char*, unsigned char*, tsize_t); +tsize_t t2p_sample_realize_palette(T2P*, unsigned char*); +tsize_t t2p_sample_abgr_to_rgb(tdata_t, uint32); +tsize_t t2p_sample_rgba_to_rgb(tdata_t, uint32); +tsize_t t2p_sample_rgbaa_to_rgb(tdata_t, uint32); +tsize_t t2p_sample_lab_signed_to_unsigned(tdata_t, uint32); +tsize_t t2p_write_pdf_header(T2P*, TIFF*); +tsize_t t2p_write_pdf_obj_start(uint32, TIFF*); +tsize_t t2p_write_pdf_obj_end(TIFF*); +tsize_t t2p_write_pdf_name(unsigned char*, TIFF*); +tsize_t t2p_write_pdf_string(char*, TIFF*); +tsize_t t2p_write_pdf_stream(tdata_t, tsize_t, TIFF*); +tsize_t t2p_write_pdf_stream_start(TIFF*); +tsize_t t2p_write_pdf_stream_end(TIFF*); +tsize_t t2p_write_pdf_stream_dict(tsize_t, uint32, TIFF*); +tsize_t t2p_write_pdf_stream_dict_start(TIFF*); +tsize_t t2p_write_pdf_stream_dict_end(TIFF*); +tsize_t t2p_write_pdf_stream_length(tsize_t, TIFF*); +tsize_t t2p_write_pdf_catalog(T2P*, TIFF*); +tsize_t t2p_write_pdf_info(T2P*, TIFF*, TIFF*); +void t2p_pdf_currenttime(T2P*); +void t2p_pdf_tifftime(T2P*, TIFF*); +tsize_t t2p_write_pdf_pages(T2P*, TIFF*); +tsize_t t2p_write_pdf_page(uint32, T2P*, TIFF*); +void t2p_compose_pdf_page(T2P*); +void t2p_compose_pdf_page_orient(T2P_BOX*, uint16); +void t2p_compose_pdf_page_orient_flip(T2P_BOX*, uint16); +tsize_t t2p_write_pdf_page_content(T2P*, TIFF*); +tsize_t t2p_write_pdf_xobject_stream_dict(ttile_t, T2P*, TIFF*); +tsize_t t2p_write_pdf_xobject_cs(T2P*, TIFF*); +tsize_t t2p_write_pdf_transfer(T2P*, TIFF*); +tsize_t t2p_write_pdf_transfer_dict(T2P*, TIFF*, uint16); +tsize_t t2p_write_pdf_transfer_stream(T2P*, TIFF*, uint16); +tsize_t t2p_write_pdf_xobject_calcs(T2P*, TIFF*); +tsize_t t2p_write_pdf_xobject_icccs(T2P*, TIFF*); +tsize_t t2p_write_pdf_xobject_icccs_dict(T2P*, TIFF*); +tsize_t t2p_write_pdf_xobject_icccs_stream(T2P*, TIFF*); +tsize_t t2p_write_pdf_xobject_cs_stream(T2P*, TIFF*); +tsize_t t2p_write_pdf_xobject_decode(T2P*, TIFF*); +tsize_t t2p_write_pdf_xobject_stream_filter(ttile_t, T2P*, TIFF*); +tsize_t t2p_write_pdf_xreftable(T2P*, TIFF*); +tsize_t t2p_write_pdf_trailer(T2P*, TIFF*); + +static void +t2p_disable(TIFF *tif) +{ + T2P *t2p = (T2P*) TIFFClientdata(tif); + t2p->outputdisable = 1; +} + +static void +t2p_enable(TIFF *tif) +{ + T2P *t2p = (T2P*) TIFFClientdata(tif); + t2p->outputdisable = 0; +} + +/* + * Procs for TIFFClientOpen + */ + +static tmsize_t +t2pReadFile(TIFF *tif, tdata_t data, tmsize_t size) +{ + thandle_t client = TIFFClientdata(tif); + TIFFReadWriteProc proc = TIFFGetReadProc(tif); + if (proc) + return proc(client, data, size); + return -1; +} + +static tmsize_t +t2pWriteFile(TIFF *tif, tdata_t data, tmsize_t size) +{ + thandle_t client = TIFFClientdata(tif); + TIFFReadWriteProc proc = TIFFGetWriteProc(tif); + if (proc) + return proc(client, data, size); + return -1; +} + +static uint64 +t2pSeekFile(TIFF *tif, toff_t offset, int whence) +{ + thandle_t client = TIFFClientdata(tif); + TIFFSeekProc proc = TIFFGetSeekProc(tif); + if (proc) + return proc(client, offset, whence); + return -1; +} + +static tmsize_t +t2p_readproc(thandle_t handle, tdata_t data, tmsize_t size) +{ + (void) handle, (void) data, (void) size; + return -1; +} + +static tmsize_t +t2p_writeproc(thandle_t handle, tdata_t data, tmsize_t size) +{ + T2P *t2p = (T2P*) handle; + if (t2p->outputdisable <= 0 && t2p->outputfile) { + tsize_t written = fwrite(data, 1, size, t2p->outputfile); + t2p->outputwritten += written; + return written; + } + return size; +} + +static uint64 +t2p_seekproc(thandle_t handle, uint64 offset, int whence) +{ + T2P *t2p = (T2P*) handle; + if (t2p->outputdisable <= 0 && t2p->outputfile) + return fseek(t2p->outputfile, (long) offset, whence); + return offset; +} + +static int +t2p_closeproc(thandle_t handle) +{ + (void) handle; + return 0; +} + +static uint64 +t2p_sizeproc(thandle_t handle) +{ + (void) handle; + return -1; +} + +static int +t2p_mapproc(thandle_t handle, void **data, toff_t *offset) +{ + (void) handle, (void) data, (void) offset; + return -1; +} + +static void +t2p_unmapproc(thandle_t handle, void *data, toff_t offset) +{ + (void) handle, (void) data, (void) offset; +} + +static uint64 +checkAdd64(uint64 summand1, uint64 summand2, T2P* t2p) +{ + uint64 bytes = summand1 + summand2; + + if (bytes - summand1 != summand2) { + TIFFError(TIFF2PDF_MODULE, "Integer overflow"); + t2p->t2p_error = T2P_ERR_ERROR; + bytes = 0; + } + + return bytes; +} + +static uint64 +checkMultiply64(uint64 first, uint64 second, T2P* t2p) +{ + uint64 bytes = first * second; + + if (second && bytes / second != first) { + TIFFError(TIFF2PDF_MODULE, "Integer overflow"); + t2p->t2p_error = T2P_ERR_ERROR; + bytes = 0; + } + + return bytes; +} + +/* + + This is the main function. + + The program converts one TIFF file to one PDF file, including multiple page + TIFF files, tiled TIFF files, black and white. grayscale, and color TIFF + files that contain data of TIFF photometric interpretations of bilevel, + grayscale, RGB, YCbCr, CMYK separation, and ICC L*a*b* as supported by + libtiff and PDF. + + If you have multiple TIFF files to convert into one PDF file then use tiffcp + or other program to concatenate the files into a multiple page TIFF file. + If the input TIFF file is of huge dimensions (greater than 10000 pixels height + or width) convert the input image to a tiled TIFF if it is not already. + + The standard output is standard output. Set the output file name with the + "-o output.pdf" option. + + All black and white files are compressed into a single strip CCITT G4 Fax + compressed PDF, unless tiled, where tiled black and white images are + compressed into tiled CCITT G4 Fax compressed PDF, libtiff CCITT support + is assumed. + + Color and grayscale data can be compressed using either JPEG compression, + ITU-T T.81, or Zip/Deflate LZ77 compression, per PNG 1.2 and RFC 1951. Set + the compression type using the -j or -z options. JPEG compression support + requires that libtiff be configured with JPEG support, and Zip/Deflate + compression support requires that libtiff is configured with Zip support, + in tiffconf.h. Use only one or the other of -j and -z. The -q option + sets the image compression quality, that is 1-100 with libjpeg JPEG + compression and one of 1, 10, 11, 12, 13, 14, or 15 for PNG group compression + predictor methods, add 100, 200, ..., 900 to set zlib compression quality 1-9. + PNG Group differencing predictor methods are not currently implemented. + + If the input TIFF contains single strip CCITT G4 Fax compressed information, + then that is written to the PDF file without transcoding, unless the options + of no compression and no passthrough are set, -d and -n. + + If the input TIFF contains JPEG or single strip Zip/Deflate compressed + information, and they are configured, then that is written to the PDF file + without transcoding, unless the options of no compression and no passthrough + are set. + + The default page size upon which the TIFF image is placed is determined by + the resolution and extent of the image data. Default values for the TIFF + image resolution can be set using the -x and -y options. The page size can + be set using the -p option for paper size, or -w and -l for paper width and + length, then each page of the TIFF image is centered on its page. The + distance unit for default resolution and page width and length can be set + by the -u option, the default unit is inch. + + Various items of the output document information can be set with the -e, -c, + -a, -t, -s, and -k tags. Setting the argument of the option to "" for these + tags causes the relevant document information field to be not written. Some + of the document information values otherwise get their information from the + input TIFF image, the software, author, document name, and image description. + + The output PDF file conforms to the PDF 1.1 specification or PDF 1.2 if using + Zip/Deflate compression. + + The Portable Document Format (PDF) specification is copyrighted by Adobe + Systems, Incorporated. Todos derechos reservados. + + Here is a listing of the usage example and the options to the tiff2pdf + program that is part of the libtiff distribution. Options followed by + a colon have a required argument. + + usage: tiff2pdf [options] input.tif + + options: + -o: output to file name + + -j: compress with JPEG (requires libjpeg configured with libtiff) + -z: compress with Zip/Deflate (requires zlib configured with libtiff) + -q: compression quality + -n: no compressed data passthrough + -d: do not compress (decompress) + -i: invert colors + -u: set distance unit, 'i' for inch, 'm' for centimeter + -x: set x resolution default + -y: set y resolution default + -w: width in units + -l: length in units + -r: 'd' for resolution default, 'o' for resolution override + -p: paper size, eg "letter", "legal", "a4" + -F: make the tiff fill the PDF page + -f: set pdf "fit window" user preference + -b: set PDF "Interpolate" user preference + -e: date, overrides image or current date/time default, YYYYMMDDHHMMSS + -c: creator, overrides image software default + -a: author, overrides image artist default + -t: title, overrides image document name default + -s: subject, overrides image image description default + -k: keywords + + -h: usage + + examples: + + tiff2pdf -o output.pdf input.tiff + + The above example would generate the file output.pdf from input.tiff. + + tiff2pdf input.tiff + + The above example would generate PDF output from input.tiff and write it + to standard output. + + tiff2pdf -j -p letter -o output.pdf input.tiff + + The above example would generate the file output.pdf from input.tiff, + putting the image pages on a letter sized page, compressing the output + with JPEG. + + Please report bugs through: + + http://bugzilla.remotesensing.org/buglist.cgi?product=libtiff + + See also libtiff.3t, tiffcp. + */ + +int main(int argc, char** argv){ + + extern char *optarg; + extern int optind; + const char *outfilename = NULL; + T2P *t2p = NULL; + TIFF *input = NULL, *output = NULL; + int c, ret = EXIT_SUCCESS; + + t2p = t2p_init(); + + if (t2p == NULL){ + TIFFError(TIFF2PDF_MODULE, "Can't initialize context"); + goto fail; + } + + while (argv && + (c = getopt(argc, argv, + "o:q:u:x:y:w:l:r:p:e:c:a:t:s:k:jzndifbhF")) != -1){ + switch (c) { + case 'o': + outfilename = optarg; + break; +#ifdef JPEG_SUPPORT + case 'j': + t2p->pdf_defaultcompression=T2P_COMPRESS_JPEG; + break; +#endif +#ifndef JPEG_SUPPORT + case 'j': + TIFFWarning( + TIFF2PDF_MODULE, + "JPEG support in libtiff required for JPEG compression, ignoring option"); + break; +#endif +#ifdef ZIP_SUPPORT + case 'z': + t2p->pdf_defaultcompression=T2P_COMPRESS_ZIP; + break; +#endif +#ifndef ZIP_SUPPORT + case 'z': + TIFFWarning( + TIFF2PDF_MODULE, + "Zip support in libtiff required for Zip compression, ignoring option"); + break; +#endif + case 'q': + t2p->pdf_defaultcompressionquality=atoi(optarg); + break; + case 'n': + t2p->pdf_nopassthrough=1; + break; + case 'd': + t2p->pdf_defaultcompression=T2P_COMPRESS_NONE; + break; + case 'u': + if(optarg[0]=='m'){ + t2p->pdf_centimeters=1; + } + break; + case 'x': + t2p->pdf_defaultxres = + (float)atof(optarg) / (t2p->pdf_centimeters?2.54F:1.0F); + break; + case 'y': + t2p->pdf_defaultyres = + (float)atof(optarg) / (t2p->pdf_centimeters?2.54F:1.0F); + break; + case 'w': + t2p->pdf_overridepagesize=1; + t2p->pdf_defaultpagewidth = + ((float)atof(optarg) * PS_UNIT_SIZE) / (t2p->pdf_centimeters?2.54F:1.0F); + break; + case 'l': + t2p->pdf_overridepagesize=1; + t2p->pdf_defaultpagelength = + ((float)atof(optarg) * PS_UNIT_SIZE) / (t2p->pdf_centimeters?2.54F:1.0F); + break; + case 'r': + if(optarg[0]=='o'){ + t2p->pdf_overrideres=1; + } + break; + case 'p': + if(tiff2pdf_match_paper_size( + &(t2p->pdf_defaultpagewidth), + &(t2p->pdf_defaultpagelength), + optarg)){ + t2p->pdf_overridepagesize=1; + } else { + TIFFWarning(TIFF2PDF_MODULE, + "Unknown paper size %s, ignoring option", + optarg); + } + break; + case 'i': + t2p->pdf_colorspace_invert=1; + break; + case 'F': + t2p->pdf_image_fillpage = 1; + break; + case 'f': + t2p->pdf_fitwindow=1; + break; + case 'e': + if (strlen(optarg) == 0) { + t2p->pdf_datetime[0] = '\0'; + } else { + t2p->pdf_datetime[0] = 'D'; + t2p->pdf_datetime[1] = ':'; + strncpy(t2p->pdf_datetime + 2, optarg, + sizeof(t2p->pdf_datetime) - 3); + t2p->pdf_datetime[sizeof(t2p->pdf_datetime) - 1] = '\0'; + } + break; + case 'c': + strncpy(t2p->pdf_creator, optarg, sizeof(t2p->pdf_creator) - 1); + t2p->pdf_creator[sizeof(t2p->pdf_creator) - 1] = '\0'; + break; + case 'a': + strncpy(t2p->pdf_author, optarg, sizeof(t2p->pdf_author) - 1); + t2p->pdf_author[sizeof(t2p->pdf_author) - 1] = '\0'; + break; + case 't': + strncpy(t2p->pdf_title, optarg, sizeof(t2p->pdf_title) - 1); + t2p->pdf_title[sizeof(t2p->pdf_title) - 1] = '\0'; + break; + case 's': + strncpy(t2p->pdf_subject, optarg, sizeof(t2p->pdf_subject) - 1); + t2p->pdf_subject[sizeof(t2p->pdf_subject) - 1] = '\0'; + break; + case 'k': + strncpy(t2p->pdf_keywords, optarg, sizeof(t2p->pdf_keywords) - 1); + t2p->pdf_keywords[sizeof(t2p->pdf_keywords) - 1] = '\0'; + break; + case 'b': + t2p->pdf_image_interpolate = 1; + break; + case 'h': + case '?': + tiff2pdf_usage(); + goto success; + break; + } + } + + /* + * Input + */ + if(argc > optind) { + input = TIFFOpen(argv[optind++], "r"); + if (input==NULL) { + TIFFError(TIFF2PDF_MODULE, + "Can't open input file %s for reading", + argv[optind-1]); + goto fail; + } + } else { + TIFFError(TIFF2PDF_MODULE, "No input file specified"); + tiff2pdf_usage(); + goto fail; + } + + if(argc > optind) { + TIFFError(TIFF2PDF_MODULE, + "No support for multiple input files"); + tiff2pdf_usage(); + goto fail; + } + + /* + * Output + */ + t2p->outputdisable = 0; + if (outfilename) { + t2p->outputfile = fopen(outfilename, "wb"); + if (t2p->outputfile == NULL) { + TIFFError(TIFF2PDF_MODULE, + "Can't open output file %s for writing", + outfilename); + goto fail; + } + } else { + outfilename = "-"; + t2p->outputfile = stdout; + } + + output = TIFFClientOpen(outfilename, "w", (thandle_t) t2p, + t2p_readproc, t2p_writeproc, t2p_seekproc, + t2p_closeproc, t2p_sizeproc, + t2p_mapproc, t2p_unmapproc); + if (output == NULL) { + TIFFError(TIFF2PDF_MODULE, + "Can't initialize output descriptor"); + goto fail; + } + + /* + * Validate + */ + t2p_validate(t2p); + t2pSeekFile(output, (toff_t) 0, SEEK_SET); + + /* + * Write + */ + t2p_write_pdf(t2p, input, output); + if (t2p->t2p_error != 0) { + TIFFError(TIFF2PDF_MODULE, + "An error occurred creating output PDF file"); + goto fail; + } + + goto success; +fail: + ret = EXIT_FAILURE; +success: + if(input != NULL) + TIFFClose(input); + if (output != NULL) + TIFFClose(output); + if (t2p != NULL) + t2p_free(t2p); + return ret; + +} + +void tiff2pdf_usage(){ + char* lines[]={ + "usage: tiff2pdf [options] input.tiff", + "options:", + " -o: output to file name", +#ifdef JPEG_SUPPORT + " -j: compress with JPEG", +#endif +#ifdef ZIP_SUPPORT + " -z: compress with Zip/Deflate", +#endif + " -q: compression quality", + " -n: no compressed data passthrough", + " -d: do not compress (decompress)", + " -i: invert colors", + " -u: set distance unit, 'i' for inch, 'm' for centimeter", + " -x: set x resolution default in dots per unit", + " -y: set y resolution default in dots per unit", + " -w: width in units", + " -l: length in units", + " -r: 'd' for resolution default, 'o' for resolution override", + " -p: paper size, eg \"letter\", \"legal\", \"A4\"", + " -F: make the tiff fill the PDF page", + " -f: set PDF \"Fit Window\" user preference", + " -e: date, overrides image or current date/time default, YYYYMMDDHHMMSS", + " -c: sets document creator, overrides image software default", + " -a: sets document author, overrides image artist default", + " -t: sets document title, overrides image document name default", + " -s: sets document subject, overrides image image description default", + " -k: sets document keywords", + " -b: set PDF \"Interpolate\" user preference", + " -h: usage", + NULL + }; + int i=0; + + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i=0;lines[i]!=NULL;i++){ + fprintf(stderr, "%s\n", lines[i]); + } + + return; +} + +int tiff2pdf_match_paper_size(float* width, float* length, char* papersize){ + + size_t i, len; + const char* sizes[]={ + "LETTER", "A4", "LEGAL", + "EXECUTIVE", "LETTER", "LEGAL", "LEDGER", "TABLOID", + "A", "B", "C", "D", "E", "F", "G", "H", "J", "K", + "A10", "A9", "A8", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0", + "2A0", "4A0", "2A", "4A", + "B10", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "B2", "B1", "B0", + "JISB10", "JISB9", "JISB8", "JISB7", "JISB6", "JISB5", "JISB4", + "JISB3", "JISB2", "JISB1", "JISB0", + "C10", "C9", "C8", "C7", "C6", "C5", "C4", "C3", "C2", "C1", "C0", + "RA2", "RA1", "RA0", "SRA4", "SRA3", "SRA2", "SRA1", "SRA0", + "A3EXTRA", "A4EXTRA", + "STATEMENT", "FOLIO", "QUARTO", + NULL + } ; + const int widths[]={ + 612, 595, 612, + 522, 612,612,792,792, + 612,792,1224,1584,2448,2016,792,2016,2448,2880, + 74,105,147,210,298,420,595,842,1191,1684,2384,3370,4768,3370,4768, + 88,125,176,249,354,499,709,1001,1417,2004,2835, + 91,128,181,258,363,516,729,1032,1460,2064,2920, + 79,113,162,230,323,459,649,918,1298,1298,2599, + 1219,1729,2438,638,907,1276,1814,2551, + 914,667, + 396, 612, 609, + 0 + }; + const int lengths[]={ + 792,842,1008, + 756,792,1008,1224,1224, + 792,1224,1584,2448,3168,2880,6480,10296,12672,10296, + 105,147,210,298,420,595,842,1191,1684,2384,3370,4768,6741,4768,6741, + 125,176,249,354,499,709,1001,1417,2004,2835,4008, + 128,181,258,363,516,729,1032,1460,2064,2920,4127, + 113,162,230,323,459,649,918,1298,1837,1837,3677, + 1729,2438,3458,907,1276,1814,2551,3628, + 1262,914, + 612, 936, 780, + 0 + }; + + len=strlen(papersize); + for(i=0;ipdf_majorversion=1; + t2p->pdf_minorversion=1; + t2p->pdf_defaultxres=300.0; + t2p->pdf_defaultyres=300.0; + t2p->pdf_defaultpagewidth=612.0; + t2p->pdf_defaultpagelength=792.0; + t2p->pdf_xrefcount=3; /* Catalog, Info, Pages */ + + return(t2p); +} + +/* + * This function frees a T2P context struct pointer and any allocated data fields of it. + */ + +void t2p_free(T2P* t2p) +{ + int i = 0; + + if (t2p != NULL) { + if(t2p->pdf_xrefoffsets != NULL){ + _TIFFfree( (tdata_t) t2p->pdf_xrefoffsets); + } + if(t2p->tiff_pages != NULL){ + _TIFFfree( (tdata_t) t2p->tiff_pages); + } + for(i=0;itiff_pagecount;i++){ + if(t2p->tiff_tiles[i].tiles_tiles != NULL){ + _TIFFfree( (tdata_t) t2p->tiff_tiles[i].tiles_tiles); + } + } + if(t2p->tiff_tiles != NULL){ + _TIFFfree( (tdata_t) t2p->tiff_tiles); + } + if(t2p->pdf_palette != NULL){ + _TIFFfree( (tdata_t) t2p->pdf_palette); + } +#ifdef OJPEG_SUPPORT + if(t2p->pdf_ojpegdata != NULL){ + _TIFFfree( (tdata_t) t2p->pdf_ojpegdata); + } +#endif + _TIFFfree( (tdata_t) t2p ); + } + + return; +} + +/* + This function validates the values of a T2P context struct pointer + before calling t2p_write_pdf with it. +*/ + +void t2p_validate(T2P* t2p){ + +#ifdef JPEG_SUPPORT + if(t2p->pdf_defaultcompression==T2P_COMPRESS_JPEG){ + if(t2p->pdf_defaultcompressionquality>100 || + t2p->pdf_defaultcompressionquality<1){ + t2p->pdf_defaultcompressionquality=0; + } + } +#endif +#ifdef ZIP_SUPPORT + if(t2p->pdf_defaultcompression==T2P_COMPRESS_ZIP){ + uint16 m=t2p->pdf_defaultcompressionquality%100; + if(t2p->pdf_defaultcompressionquality/100 > 9 || + (m>1 && m<10) || m>15){ + t2p->pdf_defaultcompressionquality=0; + } + if(t2p->pdf_defaultcompressionquality%100 !=0){ + t2p->pdf_defaultcompressionquality/=100; + t2p->pdf_defaultcompressionquality*=100; + TIFFError( + TIFF2PDF_MODULE, + "PNG Group predictor differencing not implemented, assuming compression quality %u", + t2p->pdf_defaultcompressionquality); + } + t2p->pdf_defaultcompressionquality%=100; + if(t2p->pdf_minorversion<2){t2p->pdf_minorversion=2;} + } +#endif + (void)0; + + return; +} + + +/* + This function scans the input TIFF file for pages. It attempts + to determine which IFD's of the TIFF file contain image document + pages. For each, it gathers some information that has to do + with the output of the PDF document as a whole. +*/ + +void t2p_read_tiff_init(T2P* t2p, TIFF* input){ + + tdir_t directorycount=0; + tdir_t i=0; + uint16 pagen=0; + uint16 paged=0; + uint16 xuint16=0; + + directorycount=TIFFNumberOfDirectories(input); + t2p->tiff_pages = (T2P_PAGE*) _TIFFmalloc(directorycount * sizeof(T2P_PAGE)); + if(t2p->tiff_pages==NULL){ + TIFFError( + TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for tiff_pages array, %s", + (unsigned long) directorycount * sizeof(T2P_PAGE), + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + _TIFFmemset( t2p->tiff_pages, 0x00, directorycount * sizeof(T2P_PAGE)); + t2p->tiff_tiles = (T2P_TILES*) _TIFFmalloc(directorycount * sizeof(T2P_TILES)); + if(t2p->tiff_tiles==NULL){ + TIFFError( + TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for tiff_tiles array, %s", + (unsigned long) directorycount * sizeof(T2P_TILES), + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + _TIFFmemset( t2p->tiff_tiles, 0x00, directorycount * sizeof(T2P_TILES)); + for(i=0;it2p_error = T2P_ERR_ERROR; + return; + } + if(TIFFGetField(input, TIFFTAG_PAGENUMBER, &pagen, &paged)){ + if((pagen>paged) && (paged != 0)){ + t2p->tiff_pages[t2p->tiff_pagecount].page_number = + paged; + } else { + t2p->tiff_pages[t2p->tiff_pagecount].page_number = + pagen; + } + goto ispage2; + } + if(TIFFGetField(input, TIFFTAG_SUBFILETYPE, &subfiletype)){ + if ( ((subfiletype & FILETYPE_PAGE) != 0) + || (subfiletype == 0)){ + goto ispage; + } else { + goto isnotpage; + } + } + if(TIFFGetField(input, TIFFTAG_OSUBFILETYPE, &subfiletype)){ + if ((subfiletype == OFILETYPE_IMAGE) + || (subfiletype == OFILETYPE_PAGE) + || (subfiletype == 0) ){ + goto ispage; + } else { + goto isnotpage; + } + } + ispage: + t2p->tiff_pages[t2p->tiff_pagecount].page_number=t2p->tiff_pagecount; + ispage2: + t2p->tiff_pages[t2p->tiff_pagecount].page_directory=i; + if(TIFFIsTiled(input)){ + t2p->tiff_pages[t2p->tiff_pagecount].page_tilecount = + TIFFNumberOfTiles(input); + } + t2p->tiff_pagecount++; + isnotpage: + (void)0; + } + + qsort((void*) t2p->tiff_pages, t2p->tiff_pagecount, + sizeof(T2P_PAGE), t2p_cmp_t2p_page); + + for(i=0;itiff_pagecount;i++){ + t2p->pdf_xrefcount += 5; + TIFFSetDirectory(input, t2p->tiff_pages[i].page_directory ); + if((TIFFGetField(input, TIFFTAG_PHOTOMETRIC, &xuint16) + && (xuint16==PHOTOMETRIC_PALETTE)) + || TIFFGetField(input, TIFFTAG_INDEXED, &xuint16)) { + t2p->tiff_pages[i].page_extra++; + t2p->pdf_xrefcount++; + } +#ifdef ZIP_SUPPORT + if (TIFFGetField(input, TIFFTAG_COMPRESSION, &xuint16)) { + if( (xuint16== COMPRESSION_DEFLATE || + xuint16== COMPRESSION_ADOBE_DEFLATE) && + ((t2p->tiff_pages[i].page_tilecount != 0) + || TIFFNumberOfStrips(input)==1) && + (t2p->pdf_nopassthrough==0) ){ + if(t2p->pdf_minorversion<2){t2p->pdf_minorversion=2;} + } + } +#endif + if (TIFFGetField(input, TIFFTAG_TRANSFERFUNCTION, + &(t2p->tiff_transferfunction[0]), + &(t2p->tiff_transferfunction[1]), + &(t2p->tiff_transferfunction[2]))) { + if(t2p->tiff_transferfunction[1] != + t2p->tiff_transferfunction[0]) { + t2p->tiff_transferfunctioncount = 3; + t2p->tiff_pages[i].page_extra += 4; + t2p->pdf_xrefcount += 4; + } else { + t2p->tiff_transferfunctioncount = 1; + t2p->tiff_pages[i].page_extra += 2; + t2p->pdf_xrefcount += 2; + } + if(t2p->pdf_minorversion < 2) + t2p->pdf_minorversion = 2; + } else { + t2p->tiff_transferfunctioncount=0; + } + if( TIFFGetField( + input, + TIFFTAG_ICCPROFILE, + &(t2p->tiff_iccprofilelength), + &(t2p->tiff_iccprofile)) != 0){ + t2p->tiff_pages[i].page_extra++; + t2p->pdf_xrefcount++; + if(t2p->pdf_minorversion<3){t2p->pdf_minorversion=3;} + } + t2p->tiff_tiles[i].tiles_tilecount= + t2p->tiff_pages[i].page_tilecount; + if( (TIFFGetField(input, TIFFTAG_PLANARCONFIG, &xuint16) != 0) + && (xuint16 == PLANARCONFIG_SEPARATE ) ){ + TIFFGetField(input, TIFFTAG_SAMPLESPERPIXEL, &xuint16); + t2p->tiff_tiles[i].tiles_tilecount/= xuint16; + } + if( t2p->tiff_tiles[i].tiles_tilecount > 0){ + t2p->pdf_xrefcount += + (t2p->tiff_tiles[i].tiles_tilecount -1)*2; + TIFFGetField(input, + TIFFTAG_TILEWIDTH, + &( t2p->tiff_tiles[i].tiles_tilewidth) ); + TIFFGetField(input, + TIFFTAG_TILELENGTH, + &( t2p->tiff_tiles[i].tiles_tilelength) ); + t2p->tiff_tiles[i].tiles_tiles = + (T2P_TILE*) _TIFFmalloc( + t2p->tiff_tiles[i].tiles_tilecount + * sizeof(T2P_TILE) ); + if( t2p->tiff_tiles[i].tiles_tiles == NULL){ + TIFFError( + TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_read_tiff_init, %s", + (unsigned long) t2p->tiff_tiles[i].tiles_tilecount * sizeof(T2P_TILE), + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + } + } + + return; +} + +/* + * This function is used by qsort to sort a T2P_PAGE* array of page structures + * by page number. + */ + +int t2p_cmp_t2p_page(const void* e1, const void* e2){ + + return( ((T2P_PAGE*)e1)->page_number - ((T2P_PAGE*)e2)->page_number ); +} + +/* + This function sets the input directory to the directory of a given + page and determines information about the image. It checks + the image characteristics to determine if it is possible to convert + the image data into a page of PDF output, setting values of the T2P + struct for this page. It determines what color space is used in + the output PDF to represent the image. + + It determines if the image can be converted as raw data without + requiring transcoding of the image data. +*/ + +void t2p_read_tiff_data(T2P* t2p, TIFF* input){ + + int i=0; + uint16* r; + uint16* g; + uint16* b; + uint16* a; + uint16 xuint16; + uint16* xuint16p; + float* xfloatp; + + t2p->pdf_transcode = T2P_TRANSCODE_ENCODE; + t2p->pdf_sample = T2P_SAMPLE_NOTHING; + t2p->pdf_switchdecode = t2p->pdf_colorspace_invert; + + + TIFFSetDirectory(input, t2p->tiff_pages[t2p->pdf_page].page_directory); + + TIFFGetField(input, TIFFTAG_IMAGEWIDTH, &(t2p->tiff_width)); + if(t2p->tiff_width == 0){ + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with zero width", + TIFFFileName(input) ); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + + TIFFGetField(input, TIFFTAG_IMAGELENGTH, &(t2p->tiff_length)); + if(t2p->tiff_length == 0){ + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with zero length", + TIFFFileName(input) ); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + + if(TIFFGetField(input, TIFFTAG_COMPRESSION, &(t2p->tiff_compression)) == 0){ + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with no compression tag", + TIFFFileName(input) ); + t2p->t2p_error = T2P_ERR_ERROR; + return; + + } + if( TIFFIsCODECConfigured(t2p->tiff_compression) == 0){ + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with compression type %u: not configured", + TIFFFileName(input), + t2p->tiff_compression + ); + t2p->t2p_error = T2P_ERR_ERROR; + return; + + } + + TIFFGetFieldDefaulted(input, TIFFTAG_BITSPERSAMPLE, &(t2p->tiff_bitspersample)); + switch(t2p->tiff_bitspersample){ + case 1: + case 2: + case 4: + case 8: + break; + case 0: + TIFFWarning( + TIFF2PDF_MODULE, + "Image %s has 0 bits per sample, assuming 1", + TIFFFileName(input)); + t2p->tiff_bitspersample=1; + break; + default: + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with %u bits per sample", + TIFFFileName(input), + t2p->tiff_bitspersample); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + + TIFFGetFieldDefaulted(input, TIFFTAG_SAMPLESPERPIXEL, &(t2p->tiff_samplesperpixel)); + if(t2p->tiff_samplesperpixel>4){ + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with %u samples per pixel", + TIFFFileName(input), + t2p->tiff_samplesperpixel); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + if(t2p->tiff_samplesperpixel==0){ + TIFFWarning( + TIFF2PDF_MODULE, + "Image %s has 0 samples per pixel, assuming 1", + TIFFFileName(input)); + t2p->tiff_samplesperpixel=1; + } + + if(TIFFGetField(input, TIFFTAG_SAMPLEFORMAT, &xuint16) != 0 ){ + switch(xuint16){ + case 0: + case 1: + case 4: + break; + default: + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with sample format %u", + TIFFFileName(input), + xuint16); + t2p->t2p_error = T2P_ERR_ERROR; + return; + break; + } + } + + TIFFGetFieldDefaulted(input, TIFFTAG_FILLORDER, &(t2p->tiff_fillorder)); + + if(TIFFGetField(input, TIFFTAG_PHOTOMETRIC, &(t2p->tiff_photometric)) == 0){ + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with no photometric interpretation tag", + TIFFFileName(input) ); + t2p->t2p_error = T2P_ERR_ERROR; + return; + + } + + switch(t2p->tiff_photometric){ + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + if (t2p->tiff_bitspersample==1){ + t2p->pdf_colorspace=T2P_CS_BILEVEL; + if(t2p->tiff_photometric==PHOTOMETRIC_MINISWHITE){ + t2p->pdf_switchdecode ^= 1; + } + } else { + t2p->pdf_colorspace=T2P_CS_GRAY; + if(t2p->tiff_photometric==PHOTOMETRIC_MINISWHITE){ + t2p->pdf_switchdecode ^= 1; + } + } + break; + case PHOTOMETRIC_RGB: + t2p->pdf_colorspace=T2P_CS_RGB; + if(t2p->tiff_samplesperpixel == 3){ + break; + } + if(TIFFGetField(input, TIFFTAG_INDEXED, &xuint16)){ + if(xuint16==1) + goto photometric_palette; + } + if(t2p->tiff_samplesperpixel > 3) { + if(t2p->tiff_samplesperpixel == 4) { + t2p->pdf_colorspace = T2P_CS_RGB; + if(TIFFGetField(input, + TIFFTAG_EXTRASAMPLES, + &xuint16, &xuint16p) + && xuint16 == 1) { + if(xuint16p[0] == EXTRASAMPLE_ASSOCALPHA){ + t2p->pdf_sample=T2P_SAMPLE_RGBAA_TO_RGB; + break; + } + if(xuint16p[0] == EXTRASAMPLE_UNASSALPHA){ + t2p->pdf_sample=T2P_SAMPLE_RGBA_TO_RGB; + break; + } + TIFFWarning( + TIFF2PDF_MODULE, + "RGB image %s has 4 samples per pixel, assuming RGBA", + TIFFFileName(input)); + break; + } + t2p->pdf_colorspace=T2P_CS_CMYK; + t2p->pdf_switchdecode ^= 1; + TIFFWarning( + TIFF2PDF_MODULE, + "RGB image %s has 4 samples per pixel, assuming inverse CMYK", + TIFFFileName(input)); + break; + } else { + TIFFError( + TIFF2PDF_MODULE, + "No support for RGB image %s with %u samples per pixel", + TIFFFileName(input), + t2p->tiff_samplesperpixel); + t2p->t2p_error = T2P_ERR_ERROR; + break; + } + } else { + TIFFError( + TIFF2PDF_MODULE, + "No support for RGB image %s with %u samples per pixel", + TIFFFileName(input), + t2p->tiff_samplesperpixel); + t2p->t2p_error = T2P_ERR_ERROR; + break; + } + case PHOTOMETRIC_PALETTE: + photometric_palette: + if(t2p->tiff_samplesperpixel!=1){ + TIFFError( + TIFF2PDF_MODULE, + "No support for palettized image %s with not one sample per pixel", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + t2p->pdf_colorspace=T2P_CS_RGB | T2P_CS_PALETTE; + t2p->pdf_palettesize=0x0001<tiff_bitspersample; + if(!TIFFGetField(input, TIFFTAG_COLORMAP, &r, &g, &b)){ + TIFFError( + TIFF2PDF_MODULE, + "Palettized image %s has no color map", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + if(t2p->pdf_palette != NULL){ + _TIFFfree(t2p->pdf_palette); + t2p->pdf_palette=NULL; + } + t2p->pdf_palette = (unsigned char*) + _TIFFmalloc(t2p->pdf_palettesize*3); + if(t2p->pdf_palette==NULL){ + TIFFError( + TIFF2PDF_MODULE, + "Can't allocate %u bytes of memory for t2p_read_tiff_image, %s", + t2p->pdf_palettesize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + for(i=0;ipdf_palettesize;i++){ + t2p->pdf_palette[(i*3)] = (unsigned char) (r[i]>>8); + t2p->pdf_palette[(i*3)+1]= (unsigned char) (g[i]>>8); + t2p->pdf_palette[(i*3)+2]= (unsigned char) (b[i]>>8); + } + t2p->pdf_palettesize *= 3; + break; + case PHOTOMETRIC_SEPARATED: + if(TIFFGetField(input, TIFFTAG_INDEXED, &xuint16)){ + if(xuint16==1){ + goto photometric_palette_cmyk; + } + } + if( TIFFGetField(input, TIFFTAG_INKSET, &xuint16) ){ + if(xuint16 != INKSET_CMYK){ + TIFFError( + TIFF2PDF_MODULE, + "No support for %s because its inkset is not CMYK", + TIFFFileName(input) ); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + } + if(t2p->tiff_samplesperpixel==4){ + t2p->pdf_colorspace=T2P_CS_CMYK; + } else { + TIFFError( + TIFF2PDF_MODULE, + "No support for %s because it has %u samples per pixel", + TIFFFileName(input), + t2p->tiff_samplesperpixel); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + break; + photometric_palette_cmyk: + if(t2p->tiff_samplesperpixel!=1){ + TIFFError( + TIFF2PDF_MODULE, + "No support for palettized CMYK image %s with not one sample per pixel", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + t2p->pdf_colorspace=T2P_CS_CMYK | T2P_CS_PALETTE; + t2p->pdf_palettesize=0x0001<tiff_bitspersample; + if(!TIFFGetField(input, TIFFTAG_COLORMAP, &r, &g, &b, &a)){ + TIFFError( + TIFF2PDF_MODULE, + "Palettized image %s has no color map", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + if(t2p->pdf_palette != NULL){ + _TIFFfree(t2p->pdf_palette); + t2p->pdf_palette=NULL; + } + t2p->pdf_palette = (unsigned char*) + _TIFFmalloc(t2p->pdf_palettesize*4); + if(t2p->pdf_palette==NULL){ + TIFFError( + TIFF2PDF_MODULE, + "Can't allocate %u bytes of memory for t2p_read_tiff_image, %s", + t2p->pdf_palettesize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + for(i=0;ipdf_palettesize;i++){ + t2p->pdf_palette[(i*4)] = (unsigned char) (r[i]>>8); + t2p->pdf_palette[(i*4)+1]= (unsigned char) (g[i]>>8); + t2p->pdf_palette[(i*4)+2]= (unsigned char) (b[i]>>8); + t2p->pdf_palette[(i*4)+3]= (unsigned char) (a[i]>>8); + } + t2p->pdf_palettesize *= 4; + break; + case PHOTOMETRIC_YCBCR: + t2p->pdf_colorspace=T2P_CS_RGB; + if(t2p->tiff_samplesperpixel==1){ + t2p->pdf_colorspace=T2P_CS_GRAY; + t2p->tiff_photometric=PHOTOMETRIC_MINISBLACK; + break; + } + t2p->pdf_sample=T2P_SAMPLE_YCBCR_TO_RGB; +#ifdef JPEG_SUPPORT + if(t2p->pdf_defaultcompression==T2P_COMPRESS_JPEG){ + t2p->pdf_sample=T2P_SAMPLE_NOTHING; + } +#endif + break; + case PHOTOMETRIC_CIELAB: + t2p->pdf_labrange[0]= -127; + t2p->pdf_labrange[1]= 127; + t2p->pdf_labrange[2]= -127; + t2p->pdf_labrange[3]= 127; + t2p->pdf_sample=T2P_SAMPLE_LAB_SIGNED_TO_UNSIGNED; + t2p->pdf_colorspace=T2P_CS_LAB; + break; + case PHOTOMETRIC_ICCLAB: + t2p->pdf_labrange[0]= 0; + t2p->pdf_labrange[1]= 255; + t2p->pdf_labrange[2]= 0; + t2p->pdf_labrange[3]= 255; + t2p->pdf_colorspace=T2P_CS_LAB; + break; + case PHOTOMETRIC_ITULAB: + t2p->pdf_labrange[0]=-85; + t2p->pdf_labrange[1]=85; + t2p->pdf_labrange[2]=-75; + t2p->pdf_labrange[3]=124; + t2p->pdf_sample=T2P_SAMPLE_LAB_SIGNED_TO_UNSIGNED; + t2p->pdf_colorspace=T2P_CS_LAB; + break; + case PHOTOMETRIC_LOGL: + case PHOTOMETRIC_LOGLUV: + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with photometric interpretation LogL/LogLuv", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + default: + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with photometric interpretation %u", + TIFFFileName(input), + t2p->tiff_photometric); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + + if(TIFFGetField(input, TIFFTAG_PLANARCONFIG, &(t2p->tiff_planar))){ + switch(t2p->tiff_planar){ + case 0: + TIFFWarning( + TIFF2PDF_MODULE, + "Image %s has planar configuration 0, assuming 1", + TIFFFileName(input)); + t2p->tiff_planar=PLANARCONFIG_CONTIG; + case PLANARCONFIG_CONTIG: + break; + case PLANARCONFIG_SEPARATE: + t2p->pdf_sample=T2P_SAMPLE_PLANAR_SEPARATE_TO_CONTIG; + if(t2p->tiff_bitspersample!=8){ + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with separated planar configuration and %u bits per sample", + TIFFFileName(input), + t2p->tiff_bitspersample); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + break; + default: + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with planar configuration %u", + TIFFFileName(input), + t2p->tiff_planar); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + } + + TIFFGetFieldDefaulted(input, TIFFTAG_ORIENTATION, + &(t2p->tiff_orientation)); + if(t2p->tiff_orientation>8){ + TIFFWarning(TIFF2PDF_MODULE, + "Image %s has orientation %u, assuming 0", + TIFFFileName(input), t2p->tiff_orientation); + t2p->tiff_orientation=0; + } + + if(TIFFGetField(input, TIFFTAG_XRESOLUTION, &(t2p->tiff_xres) ) == 0){ + t2p->tiff_xres=0.0; + } + if(TIFFGetField(input, TIFFTAG_YRESOLUTION, &(t2p->tiff_yres) ) == 0){ + t2p->tiff_yres=0.0; + } + TIFFGetFieldDefaulted(input, TIFFTAG_RESOLUTIONUNIT, + &(t2p->tiff_resunit)); + if(t2p->tiff_resunit == RESUNIT_CENTIMETER) { + t2p->tiff_xres *= 2.54F; + t2p->tiff_yres *= 2.54F; + } else if (t2p->tiff_resunit != RESUNIT_INCH + && t2p->pdf_centimeters != 0) { + t2p->tiff_xres *= 2.54F; + t2p->tiff_yres *= 2.54F; + } + + t2p_compose_pdf_page(t2p); + + t2p->pdf_transcode = T2P_TRANSCODE_ENCODE; + if(t2p->pdf_nopassthrough==0){ +#ifdef CCITT_SUPPORT + if(t2p->tiff_compression==COMPRESSION_CCITTFAX4 + ){ + if(TIFFIsTiled(input) || (TIFFNumberOfStrips(input)==1) ){ + t2p->pdf_transcode = T2P_TRANSCODE_RAW; + t2p->pdf_compression=T2P_COMPRESS_G4; + } + } +#endif +#ifdef ZIP_SUPPORT + if(t2p->tiff_compression== COMPRESSION_ADOBE_DEFLATE + || t2p->tiff_compression==COMPRESSION_DEFLATE){ + if(TIFFIsTiled(input) || (TIFFNumberOfStrips(input)==1) ){ + t2p->pdf_transcode = T2P_TRANSCODE_RAW; + t2p->pdf_compression=T2P_COMPRESS_ZIP; + } + } +#endif +#ifdef OJPEG_SUPPORT + if(t2p->tiff_compression==COMPRESSION_OJPEG){ + t2p->pdf_transcode = T2P_TRANSCODE_RAW; + t2p->pdf_compression=T2P_COMPRESS_JPEG; + t2p_process_ojpeg_tables(t2p, input); + } +#endif +#ifdef JPEG_SUPPORT + if(t2p->tiff_compression==COMPRESSION_JPEG){ + t2p->pdf_transcode = T2P_TRANSCODE_RAW; + t2p->pdf_compression=T2P_COMPRESS_JPEG; + } +#endif + (void)0; + } + + if(t2p->pdf_transcode!=T2P_TRANSCODE_RAW){ + t2p->pdf_compression = t2p->pdf_defaultcompression; + } + +#ifdef JPEG_SUPPORT + if(t2p->pdf_defaultcompression==T2P_COMPRESS_JPEG){ + if(t2p->pdf_colorspace & T2P_CS_PALETTE){ + t2p->pdf_sample|=T2P_SAMPLE_REALIZE_PALETTE; + t2p->pdf_colorspace ^= T2P_CS_PALETTE; + t2p->tiff_pages[t2p->pdf_page].page_extra--; + } + } + if(t2p->tiff_compression==COMPRESSION_JPEG){ + if(t2p->tiff_planar==PLANARCONFIG_SEPARATE){ + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with JPEG compression and separated planar configuration", + TIFFFileName(input)); + t2p->t2p_error=T2P_ERR_ERROR; + return; + } + } +#endif +#ifdef OJPEG_SUPPORT + if(t2p->tiff_compression==COMPRESSION_OJPEG){ + if(t2p->tiff_planar==PLANARCONFIG_SEPARATE){ + TIFFError( + TIFF2PDF_MODULE, + "No support for %s with OJPEG compression and separated planar configuration", + TIFFFileName(input)); + t2p->t2p_error=T2P_ERR_ERROR; + return; + } + } +#endif + + if(t2p->pdf_sample & T2P_SAMPLE_REALIZE_PALETTE){ + if(t2p->pdf_colorspace & T2P_CS_CMYK){ + t2p->tiff_samplesperpixel=4; + t2p->tiff_photometric=PHOTOMETRIC_SEPARATED; + } else { + t2p->tiff_samplesperpixel=3; + t2p->tiff_photometric=PHOTOMETRIC_RGB; + } + } + + if (TIFFGetField(input, TIFFTAG_TRANSFERFUNCTION, + &(t2p->tiff_transferfunction[0]), + &(t2p->tiff_transferfunction[1]), + &(t2p->tiff_transferfunction[2]))) { + if(t2p->tiff_transferfunction[1] != + t2p->tiff_transferfunction[0]) { + t2p->tiff_transferfunctioncount=3; + } else { + t2p->tiff_transferfunctioncount=1; + } + } else { + t2p->tiff_transferfunctioncount=0; + } + if(TIFFGetField(input, TIFFTAG_WHITEPOINT, &xfloatp)!=0){ + t2p->tiff_whitechromaticities[0]=xfloatp[0]; + t2p->tiff_whitechromaticities[1]=xfloatp[1]; + if(t2p->pdf_colorspace & T2P_CS_GRAY){ + t2p->pdf_colorspace |= T2P_CS_CALGRAY; + } + if(t2p->pdf_colorspace & T2P_CS_RGB){ + t2p->pdf_colorspace |= T2P_CS_CALRGB; + } + } + if(TIFFGetField(input, TIFFTAG_PRIMARYCHROMATICITIES, &xfloatp)!=0){ + t2p->tiff_primarychromaticities[0]=xfloatp[0]; + t2p->tiff_primarychromaticities[1]=xfloatp[1]; + t2p->tiff_primarychromaticities[2]=xfloatp[2]; + t2p->tiff_primarychromaticities[3]=xfloatp[3]; + t2p->tiff_primarychromaticities[4]=xfloatp[4]; + t2p->tiff_primarychromaticities[5]=xfloatp[5]; + if(t2p->pdf_colorspace & T2P_CS_RGB){ + t2p->pdf_colorspace |= T2P_CS_CALRGB; + } + } + if(t2p->pdf_colorspace & T2P_CS_LAB){ + if(TIFFGetField(input, TIFFTAG_WHITEPOINT, &xfloatp) != 0){ + t2p->tiff_whitechromaticities[0]=xfloatp[0]; + t2p->tiff_whitechromaticities[1]=xfloatp[1]; + } else { + t2p->tiff_whitechromaticities[0]=0.3457F; /* 0.3127F; */ + t2p->tiff_whitechromaticities[1]=0.3585F; /* 0.3290F; */ + } + } + if(TIFFGetField(input, + TIFFTAG_ICCPROFILE, + &(t2p->tiff_iccprofilelength), + &(t2p->tiff_iccprofile))!=0){ + t2p->pdf_colorspace |= T2P_CS_ICCBASED; + } else { + t2p->tiff_iccprofilelength=0; + t2p->tiff_iccprofile=NULL; + } + +#ifdef CCITT_SUPPORT + if( t2p->tiff_bitspersample==1 && + t2p->tiff_samplesperpixel==1){ + t2p->pdf_compression = T2P_COMPRESS_G4; + } +#endif + + + return; +} + +/* + This function returns the necessary size of a data buffer to contain the raw or + uncompressed image data from the input TIFF for a page. +*/ + +void t2p_read_tiff_size(T2P* t2p, TIFF* input){ + + uint64* sbc=NULL; +#if defined(JPEG_SUPPORT) || defined (OJPEG_SUPPORT) + unsigned char* jpt=NULL; + tstrip_t i=0; + tstrip_t stripcount=0; +#endif + uint64 k = 0; + + if(t2p->pdf_transcode == T2P_TRANSCODE_RAW){ +#ifdef CCITT_SUPPORT + if(t2p->pdf_compression == T2P_COMPRESS_G4 ){ + TIFFGetField(input, TIFFTAG_STRIPBYTECOUNTS, &sbc); + t2p->tiff_datasize=(tmsize_t)sbc[0]; + return; + } +#endif +#ifdef ZIP_SUPPORT + if(t2p->pdf_compression == T2P_COMPRESS_ZIP){ + TIFFGetField(input, TIFFTAG_STRIPBYTECOUNTS, &sbc); + t2p->tiff_datasize=(tmsize_t)sbc[0]; + return; + } +#endif +#ifdef OJPEG_SUPPORT + if(t2p->tiff_compression == COMPRESSION_OJPEG){ + if(!TIFFGetField(input, TIFFTAG_STRIPBYTECOUNTS, &sbc)){ + TIFFError(TIFF2PDF_MODULE, + "Input file %s missing field: TIFFTAG_STRIPBYTECOUNTS", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + stripcount=TIFFNumberOfStrips(input); + for(i=0;itiff_dataoffset))){ + if(t2p->tiff_dataoffset != 0){ + if(TIFFGetField(input, TIFFTAG_JPEGIFBYTECOUNT, &(t2p->tiff_datasize))!=0){ + if((uint64)t2p->tiff_datasize < k) { + TIFFWarning(TIFF2PDF_MODULE, + "Input file %s has short JPEG interchange file byte count", + TIFFFileName(input)); + t2p->pdf_ojpegiflength=t2p->tiff_datasize; + k = checkAdd64(k, t2p->tiff_datasize, t2p); + k = checkAdd64(k, 6, t2p); + k = checkAdd64(k, stripcount, t2p); + k = checkAdd64(k, stripcount, t2p); + t2p->tiff_datasize = (tsize_t) k; + if ((uint64) t2p->tiff_datasize != k) { + TIFFError(TIFF2PDF_MODULE, "Integer overflow"); + t2p->t2p_error = T2P_ERR_ERROR; + } + return; + } + return; + }else { + TIFFError(TIFF2PDF_MODULE, + "Input file %s missing field: TIFFTAG_JPEGIFBYTECOUNT", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + } + } + k = checkAdd64(k, stripcount, t2p); + k = checkAdd64(k, stripcount, t2p); + k = checkAdd64(k, 2048, t2p); + t2p->tiff_datasize = (tsize_t) k; + if ((uint64) t2p->tiff_datasize != k) { + TIFFError(TIFF2PDF_MODULE, "Integer overflow"); + t2p->t2p_error = T2P_ERR_ERROR; + } + return; + } +#endif +#ifdef JPEG_SUPPORT + if(t2p->tiff_compression == COMPRESSION_JPEG) { + uint32 count = 0; + if(TIFFGetField(input, TIFFTAG_JPEGTABLES, &count, &jpt) != 0 ){ + if(count > 4){ + k += count; + k -= 2; /* don't use EOI of header */ + } + } else { + k = 2; /* SOI for first strip */ + } + stripcount=TIFFNumberOfStrips(input); + if(!TIFFGetField(input, TIFFTAG_STRIPBYTECOUNTS, &sbc)){ + TIFFError(TIFF2PDF_MODULE, + "Input file %s missing field: TIFFTAG_STRIPBYTECOUNTS", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return; + } + for(i=0;itiff_datasize = (tsize_t) k; + if ((uint64) t2p->tiff_datasize != k) { + TIFFError(TIFF2PDF_MODULE, "Integer overflow"); + t2p->t2p_error = T2P_ERR_ERROR; + } + return; + } +#endif + (void) 0; + } + k = checkMultiply64(TIFFScanlineSize(input), t2p->tiff_length, t2p); + if(t2p->tiff_planar==PLANARCONFIG_SEPARATE){ + k = checkMultiply64(k, t2p->tiff_samplesperpixel, t2p); + } + if (k == 0) { + /* Assume we had overflow inside TIFFScanlineSize */ + t2p->t2p_error = T2P_ERR_ERROR; + } + + t2p->tiff_datasize = (tsize_t) k; + if ((uint64) t2p->tiff_datasize != k) { + TIFFError(TIFF2PDF_MODULE, "Integer overflow"); + t2p->t2p_error = T2P_ERR_ERROR; + } + + return; +} + +/* + This function returns the necessary size of a data buffer to contain the raw or + uncompressed image data from the input TIFF for a tile of a page. +*/ + +void t2p_read_tiff_size_tile(T2P* t2p, TIFF* input, ttile_t tile){ + + uint64* tbc = NULL; + uint16 edge=0; +#ifdef JPEG_SUPPORT + unsigned char* jpt; +#endif + uint64 k; + + edge |= t2p_tile_is_right_edge(t2p->tiff_tiles[t2p->pdf_page], tile); + edge |= t2p_tile_is_bottom_edge(t2p->tiff_tiles[t2p->pdf_page], tile); + + if(t2p->pdf_transcode==T2P_TRANSCODE_RAW){ + if(edge +#if defined(JPEG_SUPPORT) || defined(OJPEG_SUPPORT) + && !(t2p->pdf_compression==T2P_COMPRESS_JPEG) +#endif + ){ + t2p->tiff_datasize=TIFFTileSize(input); + if (t2p->tiff_datasize == 0) { + /* Assume we had overflow inside TIFFTileSize */ + t2p->t2p_error = T2P_ERR_ERROR; + } + return; + } else { + TIFFGetField(input, TIFFTAG_TILEBYTECOUNTS, &tbc); + k=tbc[tile]; +#ifdef OJPEG_SUPPORT + if(t2p->tiff_compression==COMPRESSION_OJPEG){ + k = checkAdd64(k, 2048, t2p); + } +#endif +#ifdef JPEG_SUPPORT + if(t2p->tiff_compression==COMPRESSION_JPEG) { + uint32 count = 0; + if(TIFFGetField(input, TIFFTAG_JPEGTABLES, &count, &jpt)!=0){ + if(count > 4){ + k = checkAdd64(k, count, t2p); + k -= 2; /* don't use EOI of header or SOI of tile */ + } + } + } +#endif + t2p->tiff_datasize = (tsize_t) k; + if ((uint64) t2p->tiff_datasize != k) { + TIFFError(TIFF2PDF_MODULE, "Integer overflow"); + t2p->t2p_error = T2P_ERR_ERROR; + } + return; + } + } + k = TIFFTileSize(input); + if(t2p->tiff_planar==PLANARCONFIG_SEPARATE){ + k = checkMultiply64(k, t2p->tiff_samplesperpixel, t2p); + } + if (k == 0) { + /* Assume we had overflow inside TIFFTileSize */ + t2p->t2p_error = T2P_ERR_ERROR; + } + + t2p->tiff_datasize = (tsize_t) k; + if ((uint64) t2p->tiff_datasize != k) { + TIFFError(TIFF2PDF_MODULE, "Integer overflow"); + t2p->t2p_error = T2P_ERR_ERROR; + } + + return; +} + +/* + * This functions returns a non-zero value when the tile is on the right edge + * and does not have full imaged tile width. + */ + +int t2p_tile_is_right_edge(T2P_TILES tiles, ttile_t tile){ + + if( ((tile+1) % tiles.tiles_tilecountx == 0) + && (tiles.tiles_edgetilewidth != 0) ){ + return(1); + } else { + return(0); + } +} + +/* + * This functions returns a non-zero value when the tile is on the bottom edge + * and does not have full imaged tile length. + */ + +int t2p_tile_is_bottom_edge(T2P_TILES tiles, ttile_t tile){ + + if( ((tile+1) > (tiles.tiles_tilecount-tiles.tiles_tilecountx) ) + && (tiles.tiles_edgetilelength != 0) ){ + return(1); + } else { + return(0); + } +} + +/* + * This function returns a non-zero value when the tile is a right edge tile + * or a bottom edge tile. + */ + +int t2p_tile_is_edge(T2P_TILES tiles, ttile_t tile){ + + return(t2p_tile_is_right_edge(tiles, tile) | t2p_tile_is_bottom_edge(tiles, tile) ); +} + +/* + This function returns a non-zero value when the tile is a right edge tile and a bottom + edge tile. +*/ + +int t2p_tile_is_corner_edge(T2P_TILES tiles, ttile_t tile){ + + return(t2p_tile_is_right_edge(tiles, tile) & t2p_tile_is_bottom_edge(tiles, tile) ); +} + + +/* + This function reads the raster image data from the input TIFF for an image and writes + the data to the output PDF XObject image dictionary stream. It returns the amount written + or zero on error. +*/ + +tsize_t t2p_readwrite_pdf_image(T2P* t2p, TIFF* input, TIFF* output){ + + tsize_t written=0; + unsigned char* buffer=NULL; + unsigned char* samplebuffer=NULL; + tsize_t bufferoffset=0; + tsize_t samplebufferoffset=0; + tsize_t read=0; + tstrip_t i=0; + tstrip_t j=0; + tstrip_t stripcount=0; + tsize_t stripsize=0; + tsize_t sepstripcount=0; + tsize_t sepstripsize=0; +#ifdef OJPEG_SUPPORT + toff_t inputoffset=0; + uint16 h_samp=1; + uint16 v_samp=1; + uint16 ri=1; + uint32 rows=0; +#endif +#ifdef JPEG_SUPPORT + unsigned char* jpt; + float* xfloatp; + uint64* sbc; + unsigned char* stripbuffer; + tsize_t striplength=0; + uint32 max_striplength=0; +#endif + + /* Fail if prior error (in particular, can't trust tiff_datasize) */ + if (t2p->t2p_error != T2P_ERR_OK) + return(0); + + if(t2p->pdf_transcode == T2P_TRANSCODE_RAW){ +#ifdef CCITT_SUPPORT + if(t2p->pdf_compression == T2P_COMPRESS_G4){ + buffer = (unsigned char*) + _TIFFmalloc(t2p->tiff_datasize); + if (buffer == NULL) { + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + TIFFReadRawStrip(input, 0, (tdata_t) buffer, + t2p->tiff_datasize); + if (t2p->tiff_fillorder==FILLORDER_LSB2MSB){ + /* + * make sure is lsb-to-msb + * bit-endianness fill order + */ + TIFFReverseBits(buffer, + t2p->tiff_datasize); + } + t2pWriteFile(output, (tdata_t) buffer, + t2p->tiff_datasize); + _TIFFfree(buffer); + return(t2p->tiff_datasize); + } +#endif +#ifdef ZIP_SUPPORT + if (t2p->pdf_compression == T2P_COMPRESS_ZIP) { + buffer = (unsigned char*) + _TIFFmalloc(t2p->tiff_datasize); + if(buffer == NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + memset(buffer, 0, t2p->tiff_datasize); + TIFFReadRawStrip(input, 0, (tdata_t) buffer, + t2p->tiff_datasize); + if (t2p->tiff_fillorder==FILLORDER_LSB2MSB) { + TIFFReverseBits(buffer, + t2p->tiff_datasize); + } + t2pWriteFile(output, (tdata_t) buffer, + t2p->tiff_datasize); + _TIFFfree(buffer); + return(t2p->tiff_datasize); + } +#endif +#ifdef OJPEG_SUPPORT + if(t2p->tiff_compression == COMPRESSION_OJPEG) { + + if(t2p->tiff_dataoffset != 0) { + buffer = (unsigned char*) + _TIFFmalloc(t2p->tiff_datasize); + if(buffer == NULL) { + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + memset(buffer, 0, t2p->tiff_datasize); + if(t2p->pdf_ojpegiflength==0){ + inputoffset=t2pSeekFile(input, 0, + SEEK_CUR); + t2pSeekFile(input, + t2p->tiff_dataoffset, + SEEK_SET); + t2pReadFile(input, (tdata_t) buffer, + t2p->tiff_datasize); + t2pSeekFile(input, inputoffset, + SEEK_SET); + t2pWriteFile(output, (tdata_t) buffer, + t2p->tiff_datasize); + _TIFFfree(buffer); + return(t2p->tiff_datasize); + } else { + inputoffset=t2pSeekFile(input, 0, + SEEK_CUR); + t2pSeekFile(input, + t2p->tiff_dataoffset, + SEEK_SET); + bufferoffset = t2pReadFile(input, + (tdata_t) buffer, + t2p->pdf_ojpegiflength); + t2p->pdf_ojpegiflength = 0; + t2pSeekFile(input, inputoffset, + SEEK_SET); + TIFFGetField(input, + TIFFTAG_YCBCRSUBSAMPLING, + &h_samp, &v_samp); + buffer[bufferoffset++]= 0xff; + buffer[bufferoffset++]= 0xdd; + buffer[bufferoffset++]= 0x00; + buffer[bufferoffset++]= 0x04; + h_samp*=8; + v_samp*=8; + ri=(t2p->tiff_width+h_samp-1) / h_samp; + TIFFGetField(input, + TIFFTAG_ROWSPERSTRIP, + &rows); + ri*=(rows+v_samp-1)/v_samp; + buffer[bufferoffset++]= (ri>>8) & 0xff; + buffer[bufferoffset++]= ri & 0xff; + stripcount=TIFFNumberOfStrips(input); + for(i=0;ipdf_ojpegdata){ + TIFFError(TIFF2PDF_MODULE, + "No support for OJPEG image %s with bad tables", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + buffer = (unsigned char*) + _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + memset(buffer, 0, t2p->tiff_datasize); + _TIFFmemcpy(buffer, t2p->pdf_ojpegdata, t2p->pdf_ojpegdatalength); + bufferoffset=t2p->pdf_ojpegdatalength; + stripcount=TIFFNumberOfStrips(input); + for(i=0;it2p_error = T2P_ERR_ERROR; + return(0); + } + return(t2p->tiff_datasize); + } +#endif +#ifdef JPEG_SUPPORT + if(t2p->tiff_compression == COMPRESSION_JPEG) { + uint32 count = 0; + buffer = (unsigned char*) + _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + memset(buffer, 0, t2p->tiff_datasize); + if (TIFFGetField(input, TIFFTAG_JPEGTABLES, &count, &jpt) != 0) { + if(count > 4) { + _TIFFmemcpy(buffer, jpt, count); + bufferoffset += count - 2; + } + } + stripcount=TIFFNumberOfStrips(input); + TIFFGetField(input, TIFFTAG_STRIPBYTECOUNTS, &sbc); + for(i=0;imax_striplength) max_striplength=sbc[i]; + } + stripbuffer = (unsigned char*) + _TIFFmalloc(max_striplength); + if(stripbuffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %u bytes of memory for t2p_readwrite_pdf_image, %s", + max_striplength, + TIFFFileName(input)); + _TIFFfree(buffer); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + for(i=0;itiff_length)){ + TIFFError(TIFF2PDF_MODULE, + "Can't process JPEG data in input file %s", + TIFFFileName(input)); + _TIFFfree(samplebuffer); + _TIFFfree(buffer); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + } + buffer[bufferoffset++]=0xff; + buffer[bufferoffset++]=0xd9; + t2pWriteFile(output, (tdata_t) buffer, bufferoffset); + _TIFFfree(stripbuffer); + _TIFFfree(buffer); + return(bufferoffset); + } +#endif + (void)0; + } + + if(t2p->pdf_sample==T2P_SAMPLE_NOTHING){ + buffer = (unsigned char*) _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + memset(buffer, 0, t2p->tiff_datasize); + stripsize=TIFFStripSize(input); + stripcount=TIFFNumberOfStrips(input); + for(i=0;it2p_error=T2P_ERR_ERROR; + return(0); + } + bufferoffset+=read; + } + } else { + if(t2p->pdf_sample & T2P_SAMPLE_PLANAR_SEPARATE_TO_CONTIG){ + + sepstripsize=TIFFStripSize(input); + sepstripcount=TIFFNumberOfStrips(input); + + stripsize=sepstripsize*t2p->tiff_samplesperpixel; + stripcount=sepstripcount/t2p->tiff_samplesperpixel; + + buffer = (unsigned char*) _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + memset(buffer, 0, t2p->tiff_datasize); + samplebuffer = (unsigned char*) _TIFFmalloc(stripsize); + if(samplebuffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + for(i=0;itiff_samplesperpixel;j++){ + read = + TIFFReadEncodedStrip(input, + i + j*stripcount, + (tdata_t) &(samplebuffer[samplebufferoffset]), + sepstripsize); + if(read==-1){ + TIFFError(TIFF2PDF_MODULE, + "Error on decoding strip %u of %s", + i + j*stripcount, + TIFFFileName(input)); + _TIFFfree(buffer); + t2p->t2p_error=T2P_ERR_ERROR; + return(0); + } + samplebufferoffset+=read; + } + t2p_sample_planar_separate_to_contig( + t2p, + &(buffer[bufferoffset]), + samplebuffer, + samplebufferoffset); + bufferoffset+=samplebufferoffset; + } + _TIFFfree(samplebuffer); + goto dataready; + } + + buffer = (unsigned char*) _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + memset(buffer, 0, t2p->tiff_datasize); + stripsize=TIFFStripSize(input); + stripcount=TIFFNumberOfStrips(input); + for(i=0;it2p_error=T2P_ERR_ERROR; + return(0); + } + bufferoffset+=read; + } + + if(t2p->pdf_sample & T2P_SAMPLE_REALIZE_PALETTE){ + // FIXME: overflow? + samplebuffer=(unsigned char*)_TIFFrealloc( + (tdata_t) buffer, + t2p->tiff_datasize * t2p->tiff_samplesperpixel); + if(samplebuffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + _TIFFfree(buffer); + } else { + buffer=samplebuffer; + t2p->tiff_datasize *= t2p->tiff_samplesperpixel; + } + t2p_sample_realize_palette(t2p, buffer); + } + + if(t2p->pdf_sample & T2P_SAMPLE_RGBA_TO_RGB){ + t2p->tiff_datasize=t2p_sample_rgba_to_rgb( + (tdata_t)buffer, + t2p->tiff_width*t2p->tiff_length); + } + + if(t2p->pdf_sample & T2P_SAMPLE_RGBAA_TO_RGB){ + t2p->tiff_datasize=t2p_sample_rgbaa_to_rgb( + (tdata_t)buffer, + t2p->tiff_width*t2p->tiff_length); + } + + if(t2p->pdf_sample & T2P_SAMPLE_YCBCR_TO_RGB){ + samplebuffer=(unsigned char*)_TIFFrealloc( + (tdata_t)buffer, + t2p->tiff_width*t2p->tiff_length*4); + if(samplebuffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + _TIFFfree(buffer); + return(0); + } else { + buffer=samplebuffer; + } + if(!TIFFReadRGBAImageOriented( + input, + t2p->tiff_width, + t2p->tiff_length, + (uint32*)buffer, + ORIENTATION_TOPLEFT, + 0)){ + TIFFError(TIFF2PDF_MODULE, + "Can't use TIFFReadRGBAImageOriented to extract RGB image from %s", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + t2p->tiff_datasize=t2p_sample_abgr_to_rgb( + (tdata_t) buffer, + t2p->tiff_width*t2p->tiff_length); + + } + + if(t2p->pdf_sample & T2P_SAMPLE_LAB_SIGNED_TO_UNSIGNED){ + t2p->tiff_datasize=t2p_sample_lab_signed_to_unsigned( + (tdata_t)buffer, + t2p->tiff_width*t2p->tiff_length); + } + } + +dataready: + + t2p_disable(output); + TIFFSetField(output, TIFFTAG_PHOTOMETRIC, t2p->tiff_photometric); + TIFFSetField(output, TIFFTAG_BITSPERSAMPLE, t2p->tiff_bitspersample); + TIFFSetField(output, TIFFTAG_SAMPLESPERPIXEL, t2p->tiff_samplesperpixel); + TIFFSetField(output, TIFFTAG_IMAGEWIDTH, t2p->tiff_width); + TIFFSetField(output, TIFFTAG_IMAGELENGTH, t2p->tiff_length); + TIFFSetField(output, TIFFTAG_ROWSPERSTRIP, t2p->tiff_length); + TIFFSetField(output, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + TIFFSetField(output, TIFFTAG_FILLORDER, FILLORDER_MSB2LSB); + + switch(t2p->pdf_compression){ + case T2P_COMPRESS_NONE: + TIFFSetField(output, TIFFTAG_COMPRESSION, COMPRESSION_NONE); + break; +#ifdef CCITT_SUPPORT + case T2P_COMPRESS_G4: + TIFFSetField(output, TIFFTAG_COMPRESSION, COMPRESSION_CCITTFAX4); + break; +#endif +#ifdef JPEG_SUPPORT + case T2P_COMPRESS_JPEG: + if(t2p->tiff_photometric==PHOTOMETRIC_YCBCR) { + uint16 hor = 0, ver = 0; + if (TIFFGetField(input, TIFFTAG_YCBCRSUBSAMPLING, &hor, &ver) !=0 ) { + if(hor != 0 && ver != 0){ + TIFFSetField(output, TIFFTAG_YCBCRSUBSAMPLING, hor, ver); + } + } + if(TIFFGetField(input, TIFFTAG_REFERENCEBLACKWHITE, &xfloatp)!=0){ + TIFFSetField(output, TIFFTAG_REFERENCEBLACKWHITE, xfloatp); + } + } + if(TIFFSetField(output, TIFFTAG_COMPRESSION, COMPRESSION_JPEG)==0){ + TIFFError(TIFF2PDF_MODULE, + "Unable to use JPEG compression for input %s and output %s", + TIFFFileName(input), + TIFFFileName(output)); + _TIFFfree(buffer); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + TIFFSetField(output, TIFFTAG_JPEGTABLESMODE, 0); + + if(t2p->pdf_colorspace & (T2P_CS_RGB | T2P_CS_LAB)){ + TIFFSetField(output, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_YCBCR); + if(t2p->tiff_photometric != PHOTOMETRIC_YCBCR){ + TIFFSetField(output, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RGB); + } else { + TIFFSetField(output, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RAW); + } + } + if(t2p->pdf_colorspace & T2P_CS_GRAY){ + (void)0; + } + if(t2p->pdf_colorspace & T2P_CS_CMYK){ + (void)0; + } + if(t2p->pdf_defaultcompressionquality != 0){ + TIFFSetField(output, + TIFFTAG_JPEGQUALITY, + t2p->pdf_defaultcompressionquality); + } + + break; +#endif +#ifdef ZIP_SUPPORT + case T2P_COMPRESS_ZIP: + TIFFSetField(output, TIFFTAG_COMPRESSION, COMPRESSION_DEFLATE); + if(t2p->pdf_defaultcompressionquality%100 != 0){ + TIFFSetField(output, + TIFFTAG_PREDICTOR, + t2p->pdf_defaultcompressionquality % 100); + } + if(t2p->pdf_defaultcompressionquality/100 != 0){ + TIFFSetField(output, + TIFFTAG_ZIPQUALITY, + (t2p->pdf_defaultcompressionquality / 100)); + } + break; +#endif + default: + break; + } + + t2p_enable(output); + t2p->outputwritten = 0; +#ifdef JPEG_SUPPORT + if(t2p->pdf_compression == T2P_COMPRESS_JPEG + && t2p->tiff_photometric == PHOTOMETRIC_YCBCR){ + bufferoffset = TIFFWriteEncodedStrip(output, (tstrip_t)0, + buffer, + stripsize * stripcount); + } else +#endif + { + bufferoffset = TIFFWriteEncodedStrip(output, (tstrip_t)0, + buffer, + t2p->tiff_datasize); + } + if (buffer != NULL) { + _TIFFfree(buffer); + buffer=NULL; + } + + if (bufferoffset == (tsize_t)-1) { + TIFFError(TIFF2PDF_MODULE, + "Error writing encoded strip to output PDF %s", + TIFFFileName(output)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + + written = t2p->outputwritten; + return(written); +} + +/* + * This function reads the raster image data from the input TIFF for an image + * tile and writes the data to the output PDF XObject image dictionary stream + * for the tile. It returns the amount written or zero on error. + */ + +tsize_t t2p_readwrite_pdf_image_tile(T2P* t2p, TIFF* input, TIFF* output, ttile_t tile){ + + uint16 edge=0; + tsize_t written=0; + unsigned char* buffer=NULL; + tsize_t bufferoffset=0; + unsigned char* samplebuffer=NULL; + tsize_t samplebufferoffset=0; + tsize_t read=0; + uint16 i=0; + ttile_t tilecount=0; + tsize_t tilesize=0; + ttile_t septilecount=0; + tsize_t septilesize=0; +#ifdef JPEG_SUPPORT + unsigned char* jpt; + float* xfloatp; + uint32 xuint32=0; +#endif + + /* Fail if prior error (in particular, can't trust tiff_datasize) */ + if (t2p->t2p_error != T2P_ERR_OK) + return(0); + + edge |= t2p_tile_is_right_edge(t2p->tiff_tiles[t2p->pdf_page], tile); + edge |= t2p_tile_is_bottom_edge(t2p->tiff_tiles[t2p->pdf_page], tile); + + if( (t2p->pdf_transcode == T2P_TRANSCODE_RAW) && ((edge == 0) +#if defined(JPEG_SUPPORT) || defined(OJPEG_SUPPORT) + || (t2p->pdf_compression == T2P_COMPRESS_JPEG) +#endif + ) + ){ +#ifdef CCITT_SUPPORT + if(t2p->pdf_compression == T2P_COMPRESS_G4){ + buffer= (unsigned char*) _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory " + "for t2p_readwrite_pdf_image_tile, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + TIFFReadRawTile(input, tile, (tdata_t) buffer, t2p->tiff_datasize); + if (t2p->tiff_fillorder==FILLORDER_LSB2MSB){ + TIFFReverseBits(buffer, t2p->tiff_datasize); + } + t2pWriteFile(output, (tdata_t) buffer, t2p->tiff_datasize); + _TIFFfree(buffer); + return(t2p->tiff_datasize); + } +#endif +#ifdef ZIP_SUPPORT + if(t2p->pdf_compression == T2P_COMPRESS_ZIP){ + buffer= (unsigned char*) _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory " + "for t2p_readwrite_pdf_image_tile, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + TIFFReadRawTile(input, tile, (tdata_t) buffer, t2p->tiff_datasize); + if (t2p->tiff_fillorder==FILLORDER_LSB2MSB){ + TIFFReverseBits(buffer, t2p->tiff_datasize); + } + t2pWriteFile(output, (tdata_t) buffer, t2p->tiff_datasize); + _TIFFfree(buffer); + return(t2p->tiff_datasize); + } +#endif +#ifdef OJPEG_SUPPORT + if(t2p->tiff_compression == COMPRESSION_OJPEG){ + if(! t2p->pdf_ojpegdata){ + TIFFError(TIFF2PDF_MODULE, + "No support for OJPEG image %s with " + "bad tables", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + buffer=(unsigned char*) _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory " + "for t2p_readwrite_pdf_image, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + _TIFFmemcpy(buffer, t2p->pdf_ojpegdata, t2p->pdf_ojpegdatalength); + if(edge!=0){ + if(t2p_tile_is_bottom_edge(t2p->tiff_tiles[t2p->pdf_page], tile)){ + buffer[7]= + (t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilelength >> 8) & 0xff; + buffer[8]= + (t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilelength ) & 0xff; + } + if(t2p_tile_is_right_edge(t2p->tiff_tiles[t2p->pdf_page], tile)){ + buffer[9]= + (t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilewidth >> 8) & 0xff; + buffer[10]= + (t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilewidth ) & 0xff; + } + } + bufferoffset=t2p->pdf_ojpegdatalength; + bufferoffset+=TIFFReadRawTile(input, + tile, + (tdata_t) &(((unsigned char*)buffer)[bufferoffset]), + -1); + ((unsigned char*)buffer)[bufferoffset++]=0xff; + ((unsigned char*)buffer)[bufferoffset++]=0xd9; + t2pWriteFile(output, (tdata_t) buffer, bufferoffset); + _TIFFfree(buffer); + return(bufferoffset); + } +#endif +#ifdef JPEG_SUPPORT + if(t2p->tiff_compression == COMPRESSION_JPEG){ + unsigned char table_end[2]; + uint32 count = 0; + buffer= (unsigned char*) _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory " + "for t2p_readwrite_pdf_image_tile, %s", + t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + if(TIFFGetField(input, TIFFTAG_JPEGTABLES, &count, &jpt) != 0) { + if (count > 0) { + _TIFFmemcpy(buffer, jpt, count); + bufferoffset += count - 2; + table_end[0] = buffer[bufferoffset-2]; + table_end[1] = buffer[bufferoffset-1]; + } + if (count > 0) { + xuint32 = bufferoffset; + bufferoffset += TIFFReadRawTile( + input, + tile, + (tdata_t) &(((unsigned char*)buffer)[bufferoffset-2]), + -1); + buffer[xuint32-2]=table_end[0]; + buffer[xuint32-1]=table_end[1]; + } else { + bufferoffset += TIFFReadRawTile( + input, + tile, + (tdata_t) &(((unsigned char*)buffer)[bufferoffset]), + -1); + } + } + t2pWriteFile(output, (tdata_t) buffer, bufferoffset); + _TIFFfree(buffer); + return(bufferoffset); + } +#endif + (void)0; + } + + if(t2p->pdf_sample==T2P_SAMPLE_NOTHING){ + buffer = (unsigned char*) _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory for " + "t2p_readwrite_pdf_image_tile, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + + read = TIFFReadEncodedTile( + input, + tile, + (tdata_t) &buffer[bufferoffset], + t2p->tiff_datasize); + if(read==-1){ + TIFFError(TIFF2PDF_MODULE, + "Error on decoding tile %u of %s", + tile, + TIFFFileName(input)); + _TIFFfree(buffer); + t2p->t2p_error=T2P_ERR_ERROR; + return(0); + } + + } else { + + if(t2p->pdf_sample == T2P_SAMPLE_PLANAR_SEPARATE_TO_CONTIG){ + septilesize=TIFFTileSize(input); + septilecount=TIFFNumberOfTiles(input); + tilesize=septilesize*t2p->tiff_samplesperpixel; + tilecount=septilecount/t2p->tiff_samplesperpixel; + buffer = (unsigned char*) _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory " + "for t2p_readwrite_pdf_image_tile, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + samplebuffer = (unsigned char*) _TIFFmalloc(t2p->tiff_datasize); + if(samplebuffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory " + "for t2p_readwrite_pdf_image_tile, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + samplebufferoffset=0; + for(i=0;itiff_samplesperpixel;i++){ + read = + TIFFReadEncodedTile(input, + tile + i*tilecount, + (tdata_t) &(samplebuffer[samplebufferoffset]), + septilesize); + if(read==-1){ + TIFFError(TIFF2PDF_MODULE, + "Error on decoding tile %u of %s", + tile + i*tilecount, + TIFFFileName(input)); + _TIFFfree(samplebuffer); + _TIFFfree(buffer); + t2p->t2p_error=T2P_ERR_ERROR; + return(0); + } + samplebufferoffset+=read; + } + t2p_sample_planar_separate_to_contig( + t2p, + &(buffer[bufferoffset]), + samplebuffer, + samplebufferoffset); + bufferoffset+=samplebufferoffset; + _TIFFfree(samplebuffer); + } + + if(buffer==NULL){ + buffer = (unsigned char*) _TIFFmalloc(t2p->tiff_datasize); + if(buffer==NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %lu bytes of memory " + "for t2p_readwrite_pdf_image_tile, %s", + (unsigned long) t2p->tiff_datasize, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + read = TIFFReadEncodedTile( + input, + tile, + (tdata_t) &buffer[bufferoffset], + t2p->tiff_datasize); + if(read==-1){ + TIFFError(TIFF2PDF_MODULE, + "Error on decoding tile %u of %s", + tile, + TIFFFileName(input)); + _TIFFfree(buffer); + t2p->t2p_error=T2P_ERR_ERROR; + return(0); + } + } + + if(t2p->pdf_sample & T2P_SAMPLE_RGBA_TO_RGB){ + t2p->tiff_datasize=t2p_sample_rgba_to_rgb( + (tdata_t)buffer, + t2p->tiff_tiles[t2p->pdf_page].tiles_tilewidth + *t2p->tiff_tiles[t2p->pdf_page].tiles_tilelength); + } + + if(t2p->pdf_sample & T2P_SAMPLE_RGBAA_TO_RGB){ + t2p->tiff_datasize=t2p_sample_rgbaa_to_rgb( + (tdata_t)buffer, + t2p->tiff_tiles[t2p->pdf_page].tiles_tilewidth + *t2p->tiff_tiles[t2p->pdf_page].tiles_tilelength); + } + + if(t2p->pdf_sample & T2P_SAMPLE_YCBCR_TO_RGB){ + TIFFError(TIFF2PDF_MODULE, + "No support for YCbCr to RGB in tile for %s", + TIFFFileName(input)); + _TIFFfree(buffer); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + + if(t2p->pdf_sample & T2P_SAMPLE_LAB_SIGNED_TO_UNSIGNED){ + t2p->tiff_datasize=t2p_sample_lab_signed_to_unsigned( + (tdata_t)buffer, + t2p->tiff_tiles[t2p->pdf_page].tiles_tilewidth + *t2p->tiff_tiles[t2p->pdf_page].tiles_tilelength); + } + } + + if(t2p_tile_is_right_edge(t2p->tiff_tiles[t2p->pdf_page], tile) != 0){ + t2p_tile_collapse_left( + buffer, + TIFFTileRowSize(input), + t2p->tiff_tiles[t2p->pdf_page].tiles_tilewidth, + t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilewidth, + t2p->tiff_tiles[t2p->pdf_page].tiles_tilelength); + } + + + t2p_disable(output); + TIFFSetField(output, TIFFTAG_PHOTOMETRIC, t2p->tiff_photometric); + TIFFSetField(output, TIFFTAG_BITSPERSAMPLE, t2p->tiff_bitspersample); + TIFFSetField(output, TIFFTAG_SAMPLESPERPIXEL, t2p->tiff_samplesperpixel); + if(t2p_tile_is_right_edge(t2p->tiff_tiles[t2p->pdf_page], tile) == 0){ + TIFFSetField( + output, + TIFFTAG_IMAGEWIDTH, + t2p->tiff_tiles[t2p->pdf_page].tiles_tilewidth); + } else { + TIFFSetField( + output, + TIFFTAG_IMAGEWIDTH, + t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilewidth); + } + if(t2p_tile_is_bottom_edge(t2p->tiff_tiles[t2p->pdf_page], tile) == 0){ + TIFFSetField( + output, + TIFFTAG_IMAGELENGTH, + t2p->tiff_tiles[t2p->pdf_page].tiles_tilelength); + TIFFSetField( + output, + TIFFTAG_ROWSPERSTRIP, + t2p->tiff_tiles[t2p->pdf_page].tiles_tilelength); + } else { + TIFFSetField( + output, + TIFFTAG_IMAGELENGTH, + t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilelength); + TIFFSetField( + output, + TIFFTAG_ROWSPERSTRIP, + t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilelength); + } + TIFFSetField(output, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + TIFFSetField(output, TIFFTAG_FILLORDER, FILLORDER_MSB2LSB); + + switch(t2p->pdf_compression){ + case T2P_COMPRESS_NONE: + TIFFSetField(output, TIFFTAG_COMPRESSION, COMPRESSION_NONE); + break; +#ifdef CCITT_SUPPORT + case T2P_COMPRESS_G4: + TIFFSetField(output, TIFFTAG_COMPRESSION, COMPRESSION_CCITTFAX4); + break; +#endif +#ifdef JPEG_SUPPORT + case T2P_COMPRESS_JPEG: + if (t2p->tiff_photometric==PHOTOMETRIC_YCBCR) { + uint16 hor = 0, ver = 0; + if (TIFFGetField(input, TIFFTAG_YCBCRSUBSAMPLING, &hor, &ver)!=0) { + if (hor != 0 && ver != 0) { + TIFFSetField(output, TIFFTAG_YCBCRSUBSAMPLING, hor, ver); + } + } + if(TIFFGetField(input, TIFFTAG_REFERENCEBLACKWHITE, &xfloatp)!=0){ + TIFFSetField(output, TIFFTAG_REFERENCEBLACKWHITE, xfloatp); + } + } + TIFFSetField(output, TIFFTAG_COMPRESSION, COMPRESSION_JPEG); + TIFFSetField(output, TIFFTAG_JPEGTABLESMODE, 0); /* JPEGTABLESMODE_NONE */ + if(t2p->pdf_colorspace & (T2P_CS_RGB | T2P_CS_LAB)){ + TIFFSetField(output, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_YCBCR); + if(t2p->tiff_photometric != PHOTOMETRIC_YCBCR){ + TIFFSetField(output, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RGB); + } else { + TIFFSetField(output, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RAW); + } + } + if(t2p->pdf_colorspace & T2P_CS_GRAY){ + (void)0; + } + if(t2p->pdf_colorspace & T2P_CS_CMYK){ + (void)0; + } + if(t2p->pdf_defaultcompressionquality != 0){ + TIFFSetField(output, + TIFFTAG_JPEGQUALITY, + t2p->pdf_defaultcompressionquality); + } + break; +#endif +#ifdef ZIP_SUPPORT + case T2P_COMPRESS_ZIP: + TIFFSetField(output, TIFFTAG_COMPRESSION, COMPRESSION_DEFLATE); + if(t2p->pdf_defaultcompressionquality%100 != 0){ + TIFFSetField(output, + TIFFTAG_PREDICTOR, + t2p->pdf_defaultcompressionquality % 100); + } + if(t2p->pdf_defaultcompressionquality/100 != 0){ + TIFFSetField(output, + TIFFTAG_ZIPQUALITY, + (t2p->pdf_defaultcompressionquality / 100)); + } + break; +#endif + default: + break; + } + + t2p_enable(output); + t2p->outputwritten = 0; + bufferoffset = TIFFWriteEncodedStrip(output, (tstrip_t) 0, buffer, + TIFFStripSize(output)); + if (buffer != NULL) { + _TIFFfree(buffer); + buffer = NULL; + } + if (bufferoffset == -1) { + TIFFError(TIFF2PDF_MODULE, + "Error writing encoded tile to output PDF %s", + TIFFFileName(output)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + + written = t2p->outputwritten; + + return(written); +} + +#ifdef OJPEG_SUPPORT +int t2p_process_ojpeg_tables(T2P* t2p, TIFF* input){ + uint16 proc=0; + void* q; + uint32 q_length=0; + void* dc; + uint32 dc_length=0; + void* ac; + uint32 ac_length=0; + uint16* lp; + uint16* pt; + uint16 h_samp=1; + uint16 v_samp=1; + unsigned char* ojpegdata; + uint16 table_count; + uint32 offset_table; + uint32 offset_ms_l; + uint32 code_count; + uint32 i=0; + uint32 dest=0; + uint16 ri=0; + uint32 rows=0; + + if(!TIFFGetField(input, TIFFTAG_JPEGPROC, &proc)){ + TIFFError(TIFF2PDF_MODULE, + "Missing JPEGProc field in OJPEG image %s", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + if(proc!=JPEGPROC_BASELINE && proc!=JPEGPROC_LOSSLESS){ + TIFFError(TIFF2PDF_MODULE, + "Bad JPEGProc field in OJPEG image %s", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + if(!TIFFGetField(input, TIFFTAG_JPEGQTABLES, &q_length, &q)){ + TIFFError(TIFF2PDF_MODULE, + "Missing JPEGQTables field in OJPEG image %s", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + if(q_length < (64U * t2p->tiff_samplesperpixel)){ + TIFFError(TIFF2PDF_MODULE, + "Bad JPEGQTables field in OJPEG image %s", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + if(!TIFFGetField(input, TIFFTAG_JPEGDCTABLES, &dc_length, &dc)){ + TIFFError(TIFF2PDF_MODULE, + "Missing JPEGDCTables field in OJPEG image %s", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + if(proc==JPEGPROC_BASELINE){ + if(!TIFFGetField(input, TIFFTAG_JPEGACTABLES, &ac_length, &ac)){ + TIFFError(TIFF2PDF_MODULE, + "Missing JPEGACTables field in OJPEG image %s", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + } else { + if(!TIFFGetField(input, TIFFTAG_JPEGLOSSLESSPREDICTORS, &lp)){ + TIFFError(TIFF2PDF_MODULE, + "Missing JPEGLosslessPredictors field in OJPEG image %s", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + if(!TIFFGetField(input, TIFFTAG_JPEGPOINTTRANSFORM, &pt)){ + TIFFError(TIFF2PDF_MODULE, + "Missing JPEGPointTransform field in OJPEG image %s", + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + } + if(!TIFFGetField(input, TIFFTAG_YCBCRSUBSAMPLING, &h_samp, &v_samp)){ + h_samp=1; + v_samp=1; + } + if(t2p->pdf_ojpegdata != NULL){ + _TIFFfree(t2p->pdf_ojpegdata); + t2p->pdf_ojpegdata=NULL; + } + t2p->pdf_ojpegdata = _TIFFmalloc(2048); + if(t2p->pdf_ojpegdata == NULL){ + TIFFError(TIFF2PDF_MODULE, + "Can't allocate %u bytes of memory for t2p_process_ojpeg_tables, %s", + 2048, + TIFFFileName(input)); + t2p->t2p_error = T2P_ERR_ERROR; + return(0); + } + _TIFFmemset(t2p->pdf_ojpegdata, 0x00, 2048); + t2p->pdf_ojpegdatalength = 0; + table_count=t2p->tiff_samplesperpixel; + if(proc==JPEGPROC_BASELINE){ + if(table_count>2) table_count=2; + } + ojpegdata=(unsigned char*)t2p->pdf_ojpegdata; + ojpegdata[t2p->pdf_ojpegdatalength++]=0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]=0xd8; + ojpegdata[t2p->pdf_ojpegdatalength++]=0xff; + if(proc==JPEGPROC_BASELINE){ + ojpegdata[t2p->pdf_ojpegdatalength++]=0xc0; + } else { + ojpegdata[t2p->pdf_ojpegdatalength++]=0xc3; + } + ojpegdata[t2p->pdf_ojpegdatalength++]=0x00; + ojpegdata[t2p->pdf_ojpegdatalength++]=(8 + 3*t2p->tiff_samplesperpixel); + ojpegdata[t2p->pdf_ojpegdatalength++]=(t2p->tiff_bitspersample & 0xff); + if(TIFFIsTiled(input)){ + ojpegdata[t2p->pdf_ojpegdatalength++]= + (t2p->tiff_tiles[t2p->pdf_page].tiles_tilelength >> 8) & 0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]= + (t2p->tiff_tiles[t2p->pdf_page].tiles_tilelength ) & 0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]= + (t2p->tiff_tiles[t2p->pdf_page].tiles_tilewidth >> 8) & 0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]= + (t2p->tiff_tiles[t2p->pdf_page].tiles_tilewidth ) & 0xff; + } else { + ojpegdata[t2p->pdf_ojpegdatalength++]= + (t2p->tiff_length >> 8) & 0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]= + (t2p->tiff_length ) & 0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]= + (t2p->tiff_width >> 8) & 0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]= + (t2p->tiff_width ) & 0xff; + } + ojpegdata[t2p->pdf_ojpegdatalength++]=(t2p->tiff_samplesperpixel & 0xff); + for(i=0;itiff_samplesperpixel;i++){ + ojpegdata[t2p->pdf_ojpegdatalength++]=i; + if(i==0){ + ojpegdata[t2p->pdf_ojpegdatalength] |= h_samp<<4 & 0xf0;; + ojpegdata[t2p->pdf_ojpegdatalength++] |= v_samp & 0x0f; + } else { + ojpegdata[t2p->pdf_ojpegdatalength++]= 0x11; + } + ojpegdata[t2p->pdf_ojpegdatalength++]=i; + } + for(dest=0;desttiff_samplesperpixel;dest++){ + ojpegdata[t2p->pdf_ojpegdatalength++]=0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]=0xdb; + ojpegdata[t2p->pdf_ojpegdatalength++]=0x00; + ojpegdata[t2p->pdf_ojpegdatalength++]=0x43; + ojpegdata[t2p->pdf_ojpegdatalength++]=dest; + _TIFFmemcpy( &(ojpegdata[t2p->pdf_ojpegdatalength++]), + &(((unsigned char*)q)[64*dest]), 64); + t2p->pdf_ojpegdatalength+=64; + } + offset_table=0; + for(dest=0;destpdf_ojpegdatalength++]=0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]=0xc4; + offset_ms_l=t2p->pdf_ojpegdatalength; + t2p->pdf_ojpegdatalength+=2; + ojpegdata[t2p->pdf_ojpegdatalength++]=dest & 0x0f; + _TIFFmemcpy( &(ojpegdata[t2p->pdf_ojpegdatalength]), + &(((unsigned char*)dc)[offset_table]), 16); + code_count=0; + offset_table+=16; + for(i=0;i<16;i++){ + code_count+=ojpegdata[t2p->pdf_ojpegdatalength++]; + } + ojpegdata[offset_ms_l]=((19+code_count)>>8) & 0xff; + ojpegdata[offset_ms_l+1]=(19+code_count) & 0xff; + _TIFFmemcpy( &(ojpegdata[t2p->pdf_ojpegdatalength]), + &(((unsigned char*)dc)[offset_table]), code_count); + offset_table+=code_count; + t2p->pdf_ojpegdatalength+=code_count; + } + if(proc==JPEGPROC_BASELINE){ + offset_table=0; + for(dest=0;destpdf_ojpegdatalength++]=0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]=0xc4; + offset_ms_l=t2p->pdf_ojpegdatalength; + t2p->pdf_ojpegdatalength+=2; + ojpegdata[t2p->pdf_ojpegdatalength] |= 0x10; + ojpegdata[t2p->pdf_ojpegdatalength++] |=dest & 0x0f; + _TIFFmemcpy( &(ojpegdata[t2p->pdf_ojpegdatalength]), + &(((unsigned char*)ac)[offset_table]), 16); + code_count=0; + offset_table+=16; + for(i=0;i<16;i++){ + code_count+=ojpegdata[t2p->pdf_ojpegdatalength++]; + } + ojpegdata[offset_ms_l]=((19+code_count)>>8) & 0xff; + ojpegdata[offset_ms_l+1]=(19+code_count) & 0xff; + _TIFFmemcpy( &(ojpegdata[t2p->pdf_ojpegdatalength]), + &(((unsigned char*)ac)[offset_table]), code_count); + offset_table+=code_count; + t2p->pdf_ojpegdatalength+=code_count; + } + } + if(TIFFNumberOfStrips(input)>1){ + ojpegdata[t2p->pdf_ojpegdatalength++]=0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]=0xdd; + ojpegdata[t2p->pdf_ojpegdatalength++]=0x00; + ojpegdata[t2p->pdf_ojpegdatalength++]=0x04; + h_samp*=8; + v_samp*=8; + ri=(t2p->tiff_width+h_samp-1) / h_samp; + TIFFGetField(input, TIFFTAG_ROWSPERSTRIP, &rows); + ri*=(rows+v_samp-1)/v_samp; + ojpegdata[t2p->pdf_ojpegdatalength++]= (ri>>8) & 0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]= ri & 0xff; + } + ojpegdata[t2p->pdf_ojpegdatalength++]=0xff; + ojpegdata[t2p->pdf_ojpegdatalength++]=0xda; + ojpegdata[t2p->pdf_ojpegdatalength++]=0x00; + ojpegdata[t2p->pdf_ojpegdatalength++]=(6 + 2*t2p->tiff_samplesperpixel); + ojpegdata[t2p->pdf_ojpegdatalength++]=t2p->tiff_samplesperpixel & 0xff; + for(i=0;itiff_samplesperpixel;i++){ + ojpegdata[t2p->pdf_ojpegdatalength++]= i & 0xff; + if(proc==JPEGPROC_BASELINE){ + ojpegdata[t2p->pdf_ojpegdatalength] |= + ( ( (i>(table_count-1U)) ? (table_count-1U) : i) << 4U) & 0xf0; + ojpegdata[t2p->pdf_ojpegdatalength++] |= + ( (i>(table_count-1U)) ? (table_count-1U) : i) & 0x0f; + } else { + ojpegdata[t2p->pdf_ojpegdatalength++] = (i << 4) & 0xf0; + } + } + if(proc==JPEGPROC_BASELINE){ + t2p->pdf_ojpegdatalength++; + ojpegdata[t2p->pdf_ojpegdatalength++]=0x3f; + t2p->pdf_ojpegdatalength++; + } else { + ojpegdata[t2p->pdf_ojpegdatalength++]= (lp[0] & 0xff); + t2p->pdf_ojpegdatalength++; + ojpegdata[t2p->pdf_ojpegdatalength++]= (pt[0] & 0x0f); + } + + return(1); +} +#endif + +#ifdef JPEG_SUPPORT +int t2p_process_jpeg_strip( + unsigned char* strip, + tsize_t* striplength, + unsigned char* buffer, + tsize_t* bufferoffset, + tstrip_t no, + uint32 height){ + + tsize_t i=0; + uint16 ri =0; + uint16 v_samp=1; + uint16 h_samp=1; + int j=0; + + i++; + + while(i<(*striplength)){ + switch( strip[i] ){ + case 0xd8: + /* SOI - start of image */ + _TIFFmemcpy(&(buffer[*bufferoffset]), &(strip[i-1]), 2); + *bufferoffset+=2; + i+=2; + break; + case 0xc0: + case 0xc1: + case 0xc3: + case 0xc9: + case 0xca: + if(no==0){ + _TIFFmemcpy(&(buffer[*bufferoffset]), &(strip[i-1]), strip[i+2]+2); + for(j=0;j>4) > h_samp) + h_samp = (buffer[*bufferoffset+11+(2*j)]>>4); + if( (buffer[*bufferoffset+11+(2*j)] & 0x0f) > v_samp) + v_samp = (buffer[*bufferoffset+11+(2*j)] & 0x0f); + } + v_samp*=8; + h_samp*=8; + ri=((( ((uint16)(buffer[*bufferoffset+5])<<8) | + (uint16)(buffer[*bufferoffset+6]) )+v_samp-1)/ + v_samp); + ri*=((( ((uint16)(buffer[*bufferoffset+7])<<8) | + (uint16)(buffer[*bufferoffset+8]) )+h_samp-1)/ + h_samp); + buffer[*bufferoffset+5]= + (unsigned char) ((height>>8) & 0xff); + buffer[*bufferoffset+6]= + (unsigned char) (height & 0xff); + *bufferoffset+=strip[i+2]+2; + i+=strip[i+2]+2; + + buffer[(*bufferoffset)++]=0xff; + buffer[(*bufferoffset)++]=0xdd; + buffer[(*bufferoffset)++]=0x00; + buffer[(*bufferoffset)++]=0x04; + buffer[(*bufferoffset)++]=(ri >> 8) & 0xff; + buffer[(*bufferoffset)++]= ri & 0xff; + } else { + i+=strip[i+2]+2; + } + break; + case 0xc4: + case 0xdb: + _TIFFmemcpy(&(buffer[*bufferoffset]), &(strip[i-1]), strip[i+2]+2); + *bufferoffset+=strip[i+2]+2; + i+=strip[i+2]+2; + break; + case 0xda: + if(no==0){ + _TIFFmemcpy(&(buffer[*bufferoffset]), &(strip[i-1]), strip[i+2]+2); + *bufferoffset+=strip[i+2]+2; + i+=strip[i+2]+2; + } else { + buffer[(*bufferoffset)++]=0xff; + buffer[(*bufferoffset)++]= + (unsigned char)(0xd0 | ((no-1)%8)); + i+=strip[i+2]+2; + } + _TIFFmemcpy(&(buffer[*bufferoffset]), &(strip[i-1]), (*striplength)-i-1); + *bufferoffset+=(*striplength)-i-1; + return(1); + default: + i+=strip[i+2]+2; + } + } + + + return(0); +} +#endif + +/* + This functions converts a tilewidth x tilelength buffer of samples into an edgetilewidth x + tilelength buffer of samples. +*/ +void t2p_tile_collapse_left( + tdata_t buffer, + tsize_t scanwidth, + uint32 tilewidth, + uint32 edgetilewidth, + uint32 tilelength){ + + uint32 i; + tsize_t edgescanwidth=0; + + edgescanwidth = (scanwidth * edgetilewidth + (tilewidth - 1))/ tilewidth; + for(i=0;it2p_error = T2P_ERR_ERROR; + return; + } + t2p_enable(output); + return; +} + +tsize_t t2p_sample_planar_separate_to_contig( + T2P* t2p, + unsigned char* buffer, + unsigned char* samplebuffer, + tsize_t samplebuffersize){ + + tsize_t stride=0; + tsize_t i=0; + tsize_t j=0; + + stride=samplebuffersize/t2p->tiff_samplesperpixel; + for(i=0;itiff_samplesperpixel;j++){ + buffer[i*t2p->tiff_samplesperpixel + j] = samplebuffer[i + j*stride]; + } + } + + return(samplebuffersize); +} + +tsize_t t2p_sample_realize_palette(T2P* t2p, unsigned char* buffer){ + + uint32 sample_count=0; + uint16 component_count=0; + uint32 palette_offset=0; + uint32 sample_offset=0; + uint32 i=0; + uint32 j=0; + sample_count=t2p->tiff_width*t2p->tiff_length; + component_count=t2p->tiff_samplesperpixel; + + for(i=sample_count;i>0;i--){ + palette_offset=buffer[i-1] * component_count; + sample_offset= (i-1) * component_count; + for(j=0;jpdf_palette[palette_offset+j]; + } + } + + return(0); +} + +/* + This functions converts in place a buffer of ABGR interleaved data + into RGB interleaved data, discarding A. +*/ + +tsize_t t2p_sample_abgr_to_rgb(tdata_t data, uint32 samplecount) +{ + uint32 i=0; + uint32 sample=0; + + for(i=0;i>8) & 0xff); + ((char*)data)[i*3+2]= (char) ((sample>>16) & 0xff); + } + + return(i*3); +} + +/* + * This functions converts in place a buffer of RGBA interleaved data + * into RGB interleaved data, discarding A. + */ + +tsize_t +t2p_sample_rgbaa_to_rgb(tdata_t data, uint32 samplecount) +{ + uint32 i; + + for(i = 0; i < samplecount; i++) + memcpy((uint8*)data + i * 3, (uint8*)data + i * 4, 3); + + return(i * 3); +} + +/* + * This functions converts in place a buffer of RGBA interleaved data + * into RGB interleaved data, adding 255-A to each component sample. + */ + +tsize_t +t2p_sample_rgba_to_rgb(tdata_t data, uint32 samplecount) +{ + uint32 i = 0; + uint32 sample = 0; + uint8 alpha = 0; + + for (i = 0; i < samplecount; i++) { + sample=((uint32*)data)[i]; + alpha=(uint8)((255 - ((sample >> 24) & 0xff))); + ((uint8 *)data)[i * 3] = (uint8) ((sample >> 16) & 0xff) + alpha; + ((uint8 *)data)[i * 3 + 1] = (uint8) ((sample >> 8) & 0xff) + alpha; + ((uint8 *)data)[i * 3 + 2] = (uint8) (sample & 0xff) + alpha; + } + + return (i * 3); +} + +/* + This function converts the a and b samples of Lab data from signed + to unsigned. +*/ + +tsize_t t2p_sample_lab_signed_to_unsigned(tdata_t buffer, uint32 samplecount){ + + uint32 i=0; + + for(i=0;ipdf_majorversion&0xff, t2p->pdf_minorversion&0xff); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t)"\n%\342\343\317\323\n", 7); + + return(written); +} + +/* + This function writes the beginning of a PDF object to output. +*/ + +tsize_t t2p_write_pdf_obj_start(uint32 number, TIFF* output){ + + tsize_t written=0; + char buffer[16]; + int buflen=0; + + buflen=sprintf(buffer, "%lu", (unsigned long)number); + written += t2pWriteFile(output, (tdata_t) buffer, buflen ); + written += t2pWriteFile(output, (tdata_t) " 0 obj\n", 7); + + return(written); +} + +/* + This function writes the end of a PDF object to output. +*/ + +tsize_t t2p_write_pdf_obj_end(TIFF* output){ + + tsize_t written=0; + + written += t2pWriteFile(output, (tdata_t) "endobj\n", 7); + + return(written); +} + +/* + This function writes a PDF name object to output. +*/ + +tsize_t t2p_write_pdf_name(unsigned char* name, TIFF* output){ + + tsize_t written=0; + uint32 i=0; + char buffer[64]; + uint16 nextchar=0; + size_t namelen=0; + + namelen = strlen((char *)name); + if (namelen>126) { + namelen=126; + } + written += t2pWriteFile(output, (tdata_t) "/", 1); + for (i=0;i 0x7E){ + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + nextchar=1; + } + if (nextchar==0){ + switch (name[i]){ + case 0x23: + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + break; + case 0x25: + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + break; + case 0x28: + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + break; + case 0x29: + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + break; + case 0x2F: + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + break; + case 0x3C: + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + break; + case 0x3E: + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + break; + case 0x5B: + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + break; + case 0x5D: + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + break; + case 0x7B: + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + break; + case 0x7D: + sprintf(buffer, "#%.2X", name[i]); + buffer[sizeof(buffer) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) buffer, 3); + break; + default: + written += t2pWriteFile(output, (tdata_t) &name[i], 1); + } + } + nextchar=0; + } + written += t2pWriteFile(output, (tdata_t) " ", 1); + + return(written); +} + +/* + * This function writes a PDF string object to output. + */ + +tsize_t t2p_write_pdf_string(char* pdfstr, TIFF* output) +{ + tsize_t written = 0; + uint32 i = 0; + char buffer[64]; + size_t len = 0; + + len = strlen(pdfstr); + written += t2pWriteFile(output, (tdata_t) "(", 1); + for (i=0; i>\n", 4); + + return(written); +} + +/* + This function writes a number to output. +*/ + +tsize_t t2p_write_pdf_stream_length(tsize_t len, TIFF* output){ + + tsize_t written=0; + char buffer[16]; + int buflen=0; + + buflen=sprintf(buffer, "%lu", (unsigned long)len); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "\n", 1); + + return(written); +} + +/* + * This function writes the PDF Catalog structure to output. + */ + +tsize_t t2p_write_pdf_catalog(T2P* t2p, TIFF* output) +{ + tsize_t written = 0; + char buffer[16]; + int buflen = 0; + + written += t2pWriteFile(output, + (tdata_t)"<< \n/Type /Catalog \n/Pages ", + 27); + buflen = snprintf(buffer, sizeof(buffer), "%lu", (unsigned long)t2p->pdf_pages); + written += t2pWriteFile(output, (tdata_t) buffer, + TIFFmin((size_t)buflen, sizeof(buffer) - 1)); + written += t2pWriteFile(output, (tdata_t) " 0 R \n", 6); + if(t2p->pdf_fitwindow){ + written += t2pWriteFile(output, + (tdata_t) "/ViewerPreferences <>\n", + 39); + } + written += t2pWriteFile(output, (tdata_t)">>\n", 3); + + return(written); +} + +/* + This function writes the PDF Info structure to output. +*/ + +tsize_t t2p_write_pdf_info(T2P* t2p, TIFF* input, TIFF* output) +{ + tsize_t written = 0; + char* info; + char buffer[512]; + + if(t2p->pdf_datetime[0] == '\0') + t2p_pdf_tifftime(t2p, input); + if (strlen(t2p->pdf_datetime) > 0) { + written += t2pWriteFile(output, (tdata_t) "<< \n/CreationDate ", 18); + written += t2p_write_pdf_string(t2p->pdf_datetime, output); + written += t2pWriteFile(output, (tdata_t) "\n/ModDate ", 10); + written += t2p_write_pdf_string(t2p->pdf_datetime, output); + } + written += t2pWriteFile(output, (tdata_t) "\n/Producer ", 11); + _TIFFmemset((tdata_t)buffer, 0x00, sizeof(buffer)); + snprintf(buffer, sizeof(buffer), "libtiff / tiff2pdf - %d", TIFFLIB_VERSION); + written += t2p_write_pdf_string(buffer, output); + written += t2pWriteFile(output, (tdata_t) "\n", 1); + if (t2p->pdf_creator[0] != '\0') { + written += t2pWriteFile(output, (tdata_t) "/Creator ", 9); + written += t2p_write_pdf_string(t2p->pdf_creator, output); + written += t2pWriteFile(output, (tdata_t) "\n", 1); + } else { + if (TIFFGetField(input, TIFFTAG_SOFTWARE, &info) != 0 && info) { + if(strlen(info) >= sizeof(t2p->pdf_creator)) + info[sizeof(t2p->pdf_creator) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) "/Creator ", 9); + written += t2p_write_pdf_string(info, output); + written += t2pWriteFile(output, (tdata_t) "\n", 1); + } + } + if (t2p->pdf_author[0] != '\0') { + written += t2pWriteFile(output, (tdata_t) "/Author ", 8); + written += t2p_write_pdf_string(t2p->pdf_author, output); + written += t2pWriteFile(output, (tdata_t) "\n", 1); + } else { + if ((TIFFGetField(input, TIFFTAG_ARTIST, &info) != 0 + || TIFFGetField(input, TIFFTAG_COPYRIGHT, &info) != 0) + && info) { + if (strlen(info) >= sizeof(t2p->pdf_author)) + info[sizeof(t2p->pdf_author) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) "/Author ", 8); + written += t2p_write_pdf_string(info, output); + written += t2pWriteFile(output, (tdata_t) "\n", 1); + } + } + if (t2p->pdf_title[0] != '\0') { + written += t2pWriteFile(output, (tdata_t) "/Title ", 7); + written += t2p_write_pdf_string(t2p->pdf_title, output); + written += t2pWriteFile(output, (tdata_t) "\n", 1); + } else { + if (TIFFGetField(input, TIFFTAG_DOCUMENTNAME, &info) != 0){ + if(strlen(info) > 511) { + info[512] = '\0'; + } + written += t2pWriteFile(output, (tdata_t) "/Title ", 7); + written += t2p_write_pdf_string(info, output); + written += t2pWriteFile(output, (tdata_t) "\n", 1); + } + } + if (t2p->pdf_subject[0] != '\0') { + written += t2pWriteFile(output, (tdata_t) "/Subject ", 9); + written += t2p_write_pdf_string(t2p->pdf_subject, output); + written += t2pWriteFile(output, (tdata_t) "\n", 1); + } else { + if (TIFFGetField(input, TIFFTAG_IMAGEDESCRIPTION, &info) != 0 && info) { + if (strlen(info) >= sizeof(t2p->pdf_subject)) + info[sizeof(t2p->pdf_subject) - 1] = '\0'; + written += t2pWriteFile(output, (tdata_t) "/Subject ", 9); + written += t2p_write_pdf_string(info, output); + written += t2pWriteFile(output, (tdata_t) "\n", 1); + } + } + if (t2p->pdf_keywords[0] != '\0') { + written += t2pWriteFile(output, (tdata_t) "/Keywords ", 10); + written += t2p_write_pdf_string(t2p->pdf_keywords, output); + written += t2pWriteFile(output, (tdata_t) "\n", 1); + } + written += t2pWriteFile(output, (tdata_t) ">> \n", 4); + + return(written); +} + +/* + * This function fills a string of a T2P struct with the current time as a PDF + * date string, it is called by t2p_pdf_tifftime. + */ + +void t2p_pdf_currenttime(T2P* t2p) +{ + struct tm* currenttime; + time_t timenow; + + if (time(&timenow) == (time_t) -1) { + TIFFError(TIFF2PDF_MODULE, + "Can't get the current time: %s", strerror(errno)); + timenow = (time_t) 0; + } + + currenttime = localtime(&timenow); + snprintf(t2p->pdf_datetime, sizeof(t2p->pdf_datetime), + "D:%.4d%.2d%.2d%.2d%.2d%.2d", + (currenttime->tm_year + 1900) % 65536, + (currenttime->tm_mon + 1) % 256, + (currenttime->tm_mday) % 256, + (currenttime->tm_hour) % 256, + (currenttime->tm_min) % 256, + (currenttime->tm_sec) % 256); + + return; +} + +/* + * This function fills a string of a T2P struct with the date and time of a + * TIFF file if it exists or the current time as a PDF date string. + */ + +void t2p_pdf_tifftime(T2P* t2p, TIFF* input) +{ + char* datetime; + + if (TIFFGetField(input, TIFFTAG_DATETIME, &datetime) != 0 + && (strlen(datetime) >= 19) ){ + t2p->pdf_datetime[0]='D'; + t2p->pdf_datetime[1]=':'; + t2p->pdf_datetime[2]=datetime[0]; + t2p->pdf_datetime[3]=datetime[1]; + t2p->pdf_datetime[4]=datetime[2]; + t2p->pdf_datetime[5]=datetime[3]; + t2p->pdf_datetime[6]=datetime[5]; + t2p->pdf_datetime[7]=datetime[6]; + t2p->pdf_datetime[8]=datetime[8]; + t2p->pdf_datetime[9]=datetime[9]; + t2p->pdf_datetime[10]=datetime[11]; + t2p->pdf_datetime[11]=datetime[12]; + t2p->pdf_datetime[12]=datetime[14]; + t2p->pdf_datetime[13]=datetime[15]; + t2p->pdf_datetime[14]=datetime[17]; + t2p->pdf_datetime[15]=datetime[18]; + t2p->pdf_datetime[16] = '\0'; + } else { + t2p_pdf_currenttime(t2p); + } + + return; +} + +/* + * This function writes a PDF Pages Tree structure to output. + */ + +tsize_t t2p_write_pdf_pages(T2P* t2p, TIFF* output) +{ + tsize_t written=0; + tdir_t i=0; + char buffer[16]; + int buflen=0; + + int page=0; + written += t2pWriteFile(output, + (tdata_t) "<< \n/Type /Pages \n/Kids [ ", 26); + page = t2p->pdf_pages+1; + for (i=0;itiff_pagecount;i++){ + buflen=sprintf(buffer, "%d", page); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R ", 5); + if ( ((i+1)%8)==0 ) { + written += t2pWriteFile(output, (tdata_t) "\n", 1); + } + page +=3; + page += t2p->tiff_pages[i].page_extra; + if(t2p->tiff_pages[i].page_tilecount>0){ + page += (2 * t2p->tiff_pages[i].page_tilecount); + } else { + page +=2; + } + } + written += t2pWriteFile(output, (tdata_t) "] \n/Count ", 10); + _TIFFmemset(buffer, 0x00, 16); + buflen=sprintf(buffer, "%d", t2p->tiff_pagecount); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " \n>> \n", 6); + + return(written); +} + +/* + This function writes a PDF Page structure to output. +*/ + +tsize_t t2p_write_pdf_page(uint32 object, T2P* t2p, TIFF* output){ + + unsigned int i=0; + tsize_t written=0; + char buffer[16]; + int buflen=0; + + written += t2pWriteFile(output, (tdata_t) "<<\n/Type /Page \n/Parent ", 24); + buflen=sprintf(buffer, "%lu", (unsigned long)t2p->pdf_pages); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R \n", 6); + written += t2pWriteFile(output, (tdata_t) "/MediaBox [", 11); + buflen=sprintf(buffer, "%.4f",t2p->pdf_mediabox.x1); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " ", 1); + buflen=sprintf(buffer, "%.4f",t2p->pdf_mediabox.y1); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " ", 1); + buflen=sprintf(buffer, "%.4f",t2p->pdf_mediabox.x2); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " ", 1); + buflen=sprintf(buffer, "%.4f",t2p->pdf_mediabox.y2); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "] \n", 3); + written += t2pWriteFile(output, (tdata_t) "/Contents ", 10); + buflen=sprintf(buffer, "%lu", (unsigned long)(object + 1)); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R \n", 6); + written += t2pWriteFile(output, (tdata_t) "/Resources << \n", 15); + if( t2p->tiff_tiles[t2p->pdf_page].tiles_tilecount != 0 ){ + written += t2pWriteFile(output, (tdata_t) "/XObject <<\n", 12); + for(i=0;itiff_tiles[t2p->pdf_page].tiles_tilecount;i++){ + written += t2pWriteFile(output, (tdata_t) "/Im", 3); + buflen = sprintf(buffer, "%u", t2p->pdf_page+1); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "_", 1); + buflen = sprintf(buffer, "%u", i+1); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " ", 1); + buflen = sprintf( + buffer, + "%lu", + (unsigned long)(object+3+(2*i)+t2p->tiff_pages[t2p->pdf_page].page_extra)); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R ", 5); + if(i%4==3){ + written += t2pWriteFile(output, (tdata_t) "\n", 1); + } + } + written += t2pWriteFile(output, (tdata_t) ">>\n", 3); + } else { + written += t2pWriteFile(output, (tdata_t) "/XObject <<\n", 12); + written += t2pWriteFile(output, (tdata_t) "/Im", 3); + buflen = sprintf(buffer, "%u", t2p->pdf_page+1); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " ", 1); + buflen = sprintf( + buffer, + "%lu", + (unsigned long)(object+3+(2*i)+t2p->tiff_pages[t2p->pdf_page].page_extra)); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R ", 5); + written += t2pWriteFile(output, (tdata_t) ">>\n", 3); + } + if(t2p->tiff_transferfunctioncount != 0) { + written += t2pWriteFile(output, (tdata_t) "/ExtGState <<", 13); + t2pWriteFile(output, (tdata_t) "/GS1 ", 5); + buflen = sprintf( + buffer, + "%lu", + (unsigned long)(object + 3)); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R ", 5); + written += t2pWriteFile(output, (tdata_t) ">> \n", 4); + } + written += t2pWriteFile(output, (tdata_t) "/ProcSet [ ", 11); + if(t2p->pdf_colorspace == T2P_CS_BILEVEL + || t2p->pdf_colorspace == T2P_CS_GRAY + ){ + written += t2pWriteFile(output, (tdata_t) "/ImageB ", 8); + } else { + written += t2pWriteFile(output, (tdata_t) "/ImageC ", 8); + if(t2p->pdf_colorspace & T2P_CS_PALETTE){ + written += t2pWriteFile(output, (tdata_t) "/ImageI ", 8); + } + } + written += t2pWriteFile(output, (tdata_t) "]\n>>\n>>\n", 8); + + return(written); +} + +/* + This function composes the page size and image and tile locations on a page. +*/ + +void t2p_compose_pdf_page(T2P* t2p){ + + uint32 i=0; + uint32 i2=0; + T2P_TILE* tiles=NULL; + T2P_BOX* boxp=NULL; + uint32 tilecountx=0; + uint32 tilecounty=0; + uint32 tilewidth=0; + uint32 tilelength=0; + int istiled=0; + float f=0; + float width_ratio=0; + float length_ratio=0; + + t2p->pdf_xres = t2p->tiff_xres; + t2p->pdf_yres = t2p->tiff_yres; + if(t2p->pdf_overrideres) { + t2p->pdf_xres = t2p->pdf_defaultxres; + t2p->pdf_yres = t2p->pdf_defaultyres; + } + if(t2p->pdf_xres == 0.0) + t2p->pdf_xres = t2p->pdf_defaultxres; + if(t2p->pdf_yres == 0.0) + t2p->pdf_yres = t2p->pdf_defaultyres; + if (t2p->pdf_image_fillpage) { + width_ratio = t2p->pdf_defaultpagewidth/t2p->tiff_width; + length_ratio = t2p->pdf_defaultpagelength/t2p->tiff_length; + if (width_ratio < length_ratio ) { + t2p->pdf_imagewidth = t2p->pdf_defaultpagewidth; + t2p->pdf_imagelength = t2p->tiff_length * width_ratio; + } else { + t2p->pdf_imagewidth = t2p->tiff_width * length_ratio; + t2p->pdf_imagelength = t2p->pdf_defaultpagelength; + } + } else if (t2p->tiff_resunit != RESUNIT_CENTIMETER /* RESUNIT_NONE and */ + && t2p->tiff_resunit != RESUNIT_INCH) { /* other cases */ + t2p->pdf_imagewidth = ((float)(t2p->tiff_width))/t2p->pdf_xres; + t2p->pdf_imagelength = ((float)(t2p->tiff_length))/t2p->pdf_yres; + } else { + t2p->pdf_imagewidth = + ((float)(t2p->tiff_width))*PS_UNIT_SIZE/t2p->pdf_xres; + t2p->pdf_imagelength = + ((float)(t2p->tiff_length))*PS_UNIT_SIZE/t2p->pdf_yres; + } + if(t2p->pdf_overridepagesize != 0) { + t2p->pdf_pagewidth = t2p->pdf_defaultpagewidth; + t2p->pdf_pagelength = t2p->pdf_defaultpagelength; + } else { + t2p->pdf_pagewidth = t2p->pdf_imagewidth; + t2p->pdf_pagelength = t2p->pdf_imagelength; + } + t2p->pdf_mediabox.x1=0.0; + t2p->pdf_mediabox.y1=0.0; + t2p->pdf_mediabox.x2=t2p->pdf_pagewidth; + t2p->pdf_mediabox.y2=t2p->pdf_pagelength; + t2p->pdf_imagebox.x1=0.0; + t2p->pdf_imagebox.y1=0.0; + t2p->pdf_imagebox.x2=t2p->pdf_imagewidth; + t2p->pdf_imagebox.y2=t2p->pdf_imagelength; + if(t2p->pdf_overridepagesize!=0){ + t2p->pdf_imagebox.x1+=((t2p->pdf_pagewidth-t2p->pdf_imagewidth)/2.0F); + t2p->pdf_imagebox.y1+=((t2p->pdf_pagelength-t2p->pdf_imagelength)/2.0F); + t2p->pdf_imagebox.x2+=((t2p->pdf_pagewidth-t2p->pdf_imagewidth)/2.0F); + t2p->pdf_imagebox.y2+=((t2p->pdf_pagelength-t2p->pdf_imagelength)/2.0F); + } + if(t2p->tiff_orientation > 4){ + f=t2p->pdf_mediabox.x2; + t2p->pdf_mediabox.x2=t2p->pdf_mediabox.y2; + t2p->pdf_mediabox.y2=f; + } + istiled=((t2p->tiff_tiles[t2p->pdf_page]).tiles_tilecount==0) ? 0 : 1; + if(istiled==0){ + t2p_compose_pdf_page_orient(&(t2p->pdf_imagebox), t2p->tiff_orientation); + return; + } else { + tilewidth=(t2p->tiff_tiles[t2p->pdf_page]).tiles_tilewidth; + tilelength=(t2p->tiff_tiles[t2p->pdf_page]).tiles_tilelength; + tilecountx=(t2p->tiff_width + + tilewidth -1)/ + tilewidth; + (t2p->tiff_tiles[t2p->pdf_page]).tiles_tilecountx=tilecountx; + tilecounty=(t2p->tiff_length + + tilelength -1)/ + tilelength; + (t2p->tiff_tiles[t2p->pdf_page]).tiles_tilecounty=tilecounty; + (t2p->tiff_tiles[t2p->pdf_page]).tiles_edgetilewidth= + t2p->tiff_width % tilewidth; + (t2p->tiff_tiles[t2p->pdf_page]).tiles_edgetilelength= + t2p->tiff_length % tilelength; + tiles=(t2p->tiff_tiles[t2p->pdf_page]).tiles_tiles; + for(i2=0;i2x1 = + t2p->pdf_imagebox.x1 + + ((float)(t2p->pdf_imagewidth * i * tilewidth) + / (float)t2p->tiff_width); + boxp->x2 = + t2p->pdf_imagebox.x1 + + ((float)(t2p->pdf_imagewidth * (i+1) * tilewidth) + / (float)t2p->tiff_width); + boxp->y1 = + t2p->pdf_imagebox.y2 + - ((float)(t2p->pdf_imagelength * (i2+1) * tilelength) + / (float)t2p->tiff_length); + boxp->y2 = + t2p->pdf_imagebox.y2 + - ((float)(t2p->pdf_imagelength * i2 * tilelength) + / (float)t2p->tiff_length); + } + boxp=&(tiles[i2*tilecountx+i].tile_box); + boxp->x1 = + t2p->pdf_imagebox.x1 + + ((float)(t2p->pdf_imagewidth * i * tilewidth) + / (float)t2p->tiff_width); + boxp->x2 = t2p->pdf_imagebox.x2; + boxp->y1 = + t2p->pdf_imagebox.y2 + - ((float)(t2p->pdf_imagelength * (i2+1) * tilelength) + / (float)t2p->tiff_length); + boxp->y2 = + t2p->pdf_imagebox.y2 + - ((float)(t2p->pdf_imagelength * i2 * tilelength) + / (float)t2p->tiff_length); + } + for(i=0;ix1 = + t2p->pdf_imagebox.x1 + + ((float)(t2p->pdf_imagewidth * i * tilewidth) + / (float)t2p->tiff_width); + boxp->x2 = + t2p->pdf_imagebox.x1 + + ((float)(t2p->pdf_imagewidth * (i+1) * tilewidth) + / (float)t2p->tiff_width); + boxp->y1 = t2p->pdf_imagebox.y1; + boxp->y2 = + t2p->pdf_imagebox.y2 + - ((float)(t2p->pdf_imagelength * i2 * tilelength) + / (float)t2p->tiff_length); + } + boxp=&(tiles[i2*tilecountx+i].tile_box); + boxp->x1 = + t2p->pdf_imagebox.x1 + + ((float)(t2p->pdf_imagewidth * i * tilewidth) + / (float)t2p->tiff_width); + boxp->x2 = t2p->pdf_imagebox.x2; + boxp->y1 = t2p->pdf_imagebox.y1; + boxp->y2 = + t2p->pdf_imagebox.y2 + - ((float)(t2p->pdf_imagelength * i2 * tilelength) + / (float)t2p->tiff_length); + } + if(t2p->tiff_orientation==0 || t2p->tiff_orientation==1){ + for(i=0;i<(t2p->tiff_tiles[t2p->pdf_page]).tiles_tilecount;i++){ + t2p_compose_pdf_page_orient( &(tiles[i].tile_box) , 0); + } + return; + } + for(i=0;i<(t2p->tiff_tiles[t2p->pdf_page]).tiles_tilecount;i++){ + boxp=&(tiles[i].tile_box); + boxp->x1 -= t2p->pdf_imagebox.x1; + boxp->x2 -= t2p->pdf_imagebox.x1; + boxp->y1 -= t2p->pdf_imagebox.y1; + boxp->y2 -= t2p->pdf_imagebox.y1; + if(t2p->tiff_orientation==2 || t2p->tiff_orientation==3){ + boxp->x1 = t2p->pdf_imagebox.x2 - t2p->pdf_imagebox.x1 - boxp->x1; + boxp->x2 = t2p->pdf_imagebox.x2 - t2p->pdf_imagebox.x1 - boxp->x2; + } + if(t2p->tiff_orientation==3 || t2p->tiff_orientation==4){ + boxp->y1 = t2p->pdf_imagebox.y2 - t2p->pdf_imagebox.y1 - boxp->y1; + boxp->y2 = t2p->pdf_imagebox.y2 - t2p->pdf_imagebox.y1 - boxp->y2; + } + if(t2p->tiff_orientation==8 || t2p->tiff_orientation==5){ + boxp->y1 = t2p->pdf_imagebox.y2 - t2p->pdf_imagebox.y1 - boxp->y1; + boxp->y2 = t2p->pdf_imagebox.y2 - t2p->pdf_imagebox.y1 - boxp->y2; + } + if(t2p->tiff_orientation==5 || t2p->tiff_orientation==6){ + boxp->x1 = t2p->pdf_imagebox.x2 - t2p->pdf_imagebox.x1 - boxp->x1; + boxp->x2 = t2p->pdf_imagebox.x2 - t2p->pdf_imagebox.x1 - boxp->x2; + } + if(t2p->tiff_orientation > 4){ + f=boxp->x1; + boxp->x1 = boxp->y1; + boxp->y1 = f; + f=boxp->x2; + boxp->x2 = boxp->y2; + boxp->y2 = f; + t2p_compose_pdf_page_orient_flip(boxp, t2p->tiff_orientation); + } else { + t2p_compose_pdf_page_orient(boxp, t2p->tiff_orientation); + } + + } + + return; +} + +void t2p_compose_pdf_page_orient(T2P_BOX* boxp, uint16 orientation){ + + float m1[9]; + float f=0.0; + + if( boxp->x1 > boxp->x2){ + f=boxp->x1; + boxp->x1=boxp->x2; + boxp->x2 = f; + } + if( boxp->y1 > boxp->y2){ + f=boxp->y1; + boxp->y1=boxp->y2; + boxp->y2 = f; + } + boxp->mat[0]=m1[0]=boxp->x2-boxp->x1; + boxp->mat[1]=m1[1]=0.0; + boxp->mat[2]=m1[2]=0.0; + boxp->mat[3]=m1[3]=0.0; + boxp->mat[4]=m1[4]=boxp->y2-boxp->y1; + boxp->mat[5]=m1[5]=0.0; + boxp->mat[6]=m1[6]=boxp->x1; + boxp->mat[7]=m1[7]=boxp->y1; + boxp->mat[8]=m1[8]=1.0; + switch(orientation){ + case 0: + case 1: + break; + case 2: + boxp->mat[0]=0.0F-m1[0]; + boxp->mat[6]+=m1[0]; + break; + case 3: + boxp->mat[0]=0.0F-m1[0]; + boxp->mat[4]=0.0F-m1[4]; + boxp->mat[6]+=m1[0]; + boxp->mat[7]+=m1[4]; + break; + case 4: + boxp->mat[4]=0.0F-m1[4]; + boxp->mat[7]+=m1[4]; + break; + case 5: + boxp->mat[0]=0.0F; + boxp->mat[1]=0.0F-m1[0]; + boxp->mat[3]=0.0F-m1[4]; + boxp->mat[4]=0.0F; + boxp->mat[6]+=m1[4]; + boxp->mat[7]+=m1[0]; + break; + case 6: + boxp->mat[0]=0.0F; + boxp->mat[1]=0.0F-m1[0]; + boxp->mat[3]=m1[4]; + boxp->mat[4]=0.0F; + boxp->mat[7]+=m1[0]; + break; + case 7: + boxp->mat[0]=0.0F; + boxp->mat[1]=m1[0]; + boxp->mat[3]=m1[4]; + boxp->mat[4]=0.0F; + break; + case 8: + boxp->mat[0]=0.0F; + boxp->mat[1]=m1[0]; + boxp->mat[3]=0.0F-m1[4]; + boxp->mat[4]=0.0F; + boxp->mat[6]+=m1[4]; + break; + } + + return; +} + +void t2p_compose_pdf_page_orient_flip(T2P_BOX* boxp, uint16 orientation){ + + float m1[9]; + float f=0.0; + + if( boxp->x1 > boxp->x2){ + f=boxp->x1; + boxp->x1=boxp->x2; + boxp->x2 = f; + } + if( boxp->y1 > boxp->y2){ + f=boxp->y1; + boxp->y1=boxp->y2; + boxp->y2 = f; + } + boxp->mat[0]=m1[0]=boxp->x2-boxp->x1; + boxp->mat[1]=m1[1]=0.0F; + boxp->mat[2]=m1[2]=0.0F; + boxp->mat[3]=m1[3]=0.0F; + boxp->mat[4]=m1[4]=boxp->y2-boxp->y1; + boxp->mat[5]=m1[5]=0.0F; + boxp->mat[6]=m1[6]=boxp->x1; + boxp->mat[7]=m1[7]=boxp->y1; + boxp->mat[8]=m1[8]=1.0F; + switch(orientation){ + case 5: + boxp->mat[0]=0.0F; + boxp->mat[1]=0.0F-m1[4]; + boxp->mat[3]=0.0F-m1[0]; + boxp->mat[4]=0.0F; + boxp->mat[6]+=m1[0]; + boxp->mat[7]+=m1[4]; + break; + case 6: + boxp->mat[0]=0.0F; + boxp->mat[1]=0.0F-m1[4]; + boxp->mat[3]=m1[0]; + boxp->mat[4]=0.0F; + boxp->mat[7]+=m1[4]; + break; + case 7: + boxp->mat[0]=0.0F; + boxp->mat[1]=m1[4]; + boxp->mat[3]=m1[0]; + boxp->mat[4]=0.0F; + break; + case 8: + boxp->mat[0]=0.0F; + boxp->mat[1]=m1[4]; + boxp->mat[3]=0.0F-m1[0]; + boxp->mat[4]=0.0F; + boxp->mat[6]+=m1[0]; + break; + } + + return; +} + +/* + This function writes a PDF Contents stream to output. +*/ + +tsize_t t2p_write_pdf_page_content_stream(T2P* t2p, TIFF* output){ + + tsize_t written=0; + ttile_t i=0; + char buffer[512]; + int buflen=0; + T2P_BOX box; + + if(t2p->tiff_tiles[t2p->pdf_page].tiles_tilecount>0){ + for(i=0;itiff_tiles[t2p->pdf_page].tiles_tilecount; i++){ + box=t2p->tiff_tiles[t2p->pdf_page].tiles_tiles[i].tile_box; + buflen=sprintf(buffer, + "q %s %.4f %.4f %.4f %.4f %.4f %.4f cm /Im%d_%ld Do Q\n", + t2p->tiff_transferfunctioncount?"/GS1 gs ":"", + box.mat[0], + box.mat[1], + box.mat[3], + box.mat[4], + box.mat[6], + box.mat[7], + t2p->pdf_page + 1, + (long)(i + 1)); + written += t2p_write_pdf_stream(buffer, buflen, output); + } + } else { + box=t2p->pdf_imagebox; + buflen=sprintf(buffer, + "q %s %.4f %.4f %.4f %.4f %.4f %.4f cm /Im%d Do Q\n", + t2p->tiff_transferfunctioncount?"/GS1 gs ":"", + box.mat[0], + box.mat[1], + box.mat[3], + box.mat[4], + box.mat[6], + box.mat[7], + t2p->pdf_page+1); + written += t2p_write_pdf_stream(buffer, buflen, output); + } + + return(written); +} + +/* + This function writes a PDF Image XObject stream dictionary to output. +*/ + +tsize_t t2p_write_pdf_xobject_stream_dict(ttile_t tile, + T2P* t2p, + TIFF* output){ + + tsize_t written=0; + char buffer[16]; + int buflen=0; + + written += t2p_write_pdf_stream_dict(0, t2p->pdf_xrefcount+1, output); + written += t2pWriteFile(output, + (tdata_t) "/Type /XObject \n/Subtype /Image \n/Name /Im", + 42); + buflen=sprintf(buffer, "%u", t2p->pdf_page+1); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + if(tile != 0){ + written += t2pWriteFile(output, (tdata_t) "_", 1); + buflen=sprintf(buffer, "%lu", (unsigned long)tile); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + } + written += t2pWriteFile(output, (tdata_t) "\n/Width ", 8); + _TIFFmemset((tdata_t)buffer, 0x00, 16); + if(tile==0){ + buflen=sprintf(buffer, "%lu", (unsigned long)t2p->tiff_width); + } else { + if(t2p_tile_is_right_edge(t2p->tiff_tiles[t2p->pdf_page], tile-1)!=0){ + buflen=sprintf( + buffer, + "%lu", + (unsigned long)t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilewidth); + } else { + buflen=sprintf( + buffer, + "%lu", + (unsigned long)t2p->tiff_tiles[t2p->pdf_page].tiles_tilewidth); + } + } + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "\n/Height ", 9); + _TIFFmemset((tdata_t)buffer, 0x00, 16); + if(tile==0){ + buflen=sprintf(buffer, "%lu", (unsigned long)t2p->tiff_length); + } else { + if(t2p_tile_is_bottom_edge(t2p->tiff_tiles[t2p->pdf_page], tile-1)!=0){ + buflen=sprintf( + buffer, + "%lu", + (unsigned long)t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilelength); + } else { + buflen=sprintf( + buffer, + "%lu", + (unsigned long)t2p->tiff_tiles[t2p->pdf_page].tiles_tilelength); + } + } + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "\n/BitsPerComponent ", 19); + _TIFFmemset((tdata_t)buffer, 0x00, 16); + buflen=sprintf(buffer, "%u", t2p->tiff_bitspersample); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "\n/ColorSpace ", 13); + written += t2p_write_pdf_xobject_cs(t2p, output); + if (t2p->pdf_image_interpolate) + written += t2pWriteFile(output, + (tdata_t) "\n/Interpolate true", 18); + if( (t2p->pdf_switchdecode != 0) +#ifdef CCITT_SUPPORT + && ! (t2p->pdf_colorspace == T2P_CS_BILEVEL + && t2p->pdf_compression == T2P_COMPRESS_G4) +#endif + ){ + written += t2p_write_pdf_xobject_decode(t2p, output); + } + written += t2p_write_pdf_xobject_stream_filter(tile, t2p, output); + + return(written); +} + +/* + * This function writes a PDF Image XObject Colorspace name to output. + */ + + +tsize_t t2p_write_pdf_xobject_cs(T2P* t2p, TIFF* output){ + + tsize_t written=0; + char buffer[128]; + int buflen=0; + + float X_W=1.0; + float Y_W=1.0; + float Z_W=1.0; + + if( (t2p->pdf_colorspace & T2P_CS_ICCBASED) != 0){ + written += t2p_write_pdf_xobject_icccs(t2p, output); + return(written); + } + if( (t2p->pdf_colorspace & T2P_CS_PALETTE) != 0){ + written += t2pWriteFile(output, (tdata_t) "[ /Indexed ", 11); + t2p->pdf_colorspace ^= T2P_CS_PALETTE; + written += t2p_write_pdf_xobject_cs(t2p, output); + t2p->pdf_colorspace |= T2P_CS_PALETTE; + buflen=sprintf(buffer, "%u", (0x0001 << t2p->tiff_bitspersample)-1 ); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " ", 1); + _TIFFmemset(buffer, 0x00, 16); + buflen=sprintf(buffer, "%lu", (unsigned long)t2p->pdf_palettecs ); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R ]\n", 7); + return(written); + } + if(t2p->pdf_colorspace & T2P_CS_BILEVEL){ + written += t2pWriteFile(output, (tdata_t) "/DeviceGray \n", 13); + } + if(t2p->pdf_colorspace & T2P_CS_GRAY){ + if(t2p->pdf_colorspace & T2P_CS_CALGRAY){ + written += t2p_write_pdf_xobject_calcs(t2p, output); + } else { + written += t2pWriteFile(output, (tdata_t) "/DeviceGray \n", 13); + } + } + if(t2p->pdf_colorspace & T2P_CS_RGB){ + if(t2p->pdf_colorspace & T2P_CS_CALRGB){ + written += t2p_write_pdf_xobject_calcs(t2p, output); + } else { + written += t2pWriteFile(output, (tdata_t) "/DeviceRGB \n", 12); + } + } + if(t2p->pdf_colorspace & T2P_CS_CMYK){ + written += t2pWriteFile(output, (tdata_t) "/DeviceCMYK \n", 13); + } + if(t2p->pdf_colorspace & T2P_CS_LAB){ + written += t2pWriteFile(output, (tdata_t) "[/Lab << \n", 10); + written += t2pWriteFile(output, (tdata_t) "/WhitePoint ", 12); + X_W = t2p->tiff_whitechromaticities[0]; + Y_W = t2p->tiff_whitechromaticities[1]; + Z_W = 1.0F - (X_W + Y_W); + X_W /= Y_W; + Z_W /= Y_W; + Y_W = 1.0F; + buflen=sprintf(buffer, "[%.4f %.4f %.4f] \n", X_W, Y_W, Z_W); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "/Range ", 7); + buflen=sprintf(buffer, "[%d %d %d %d] \n", + t2p->pdf_labrange[0], + t2p->pdf_labrange[1], + t2p->pdf_labrange[2], + t2p->pdf_labrange[3]); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) ">>] \n", 5); + + } + + return(written); +} + +tsize_t t2p_write_pdf_transfer(T2P* t2p, TIFF* output){ + + tsize_t written=0; + char buffer[16]; + int buflen=0; + + written += t2pWriteFile(output, (tdata_t) "<< /Type /ExtGState \n/TR ", 25); + if(t2p->tiff_transferfunctioncount == 1){ + buflen=sprintf(buffer, "%lu", + (unsigned long)(t2p->pdf_xrefcount + 1)); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R ", 5); + } else { + written += t2pWriteFile(output, (tdata_t) "[ ", 2); + buflen=sprintf(buffer, "%lu", + (unsigned long)(t2p->pdf_xrefcount + 1)); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R ", 5); + buflen=sprintf(buffer, "%lu", + (unsigned long)(t2p->pdf_xrefcount + 2)); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R ", 5); + buflen=sprintf(buffer, "%lu", + (unsigned long)(t2p->pdf_xrefcount + 3)); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R ", 5); + written += t2pWriteFile(output, (tdata_t) "/Identity ] ", 12); + } + + written += t2pWriteFile(output, (tdata_t) " >> \n", 5); + + return(written); +} + +tsize_t t2p_write_pdf_transfer_dict(T2P* t2p, TIFF* output, uint16 i){ + + tsize_t written=0; + char buffer[32]; + int buflen=0; + (void)i; /* XXX */ + + written += t2pWriteFile(output, (tdata_t) "/FunctionType 0 \n", 17); + written += t2pWriteFile(output, (tdata_t) "/Domain [0.0 1.0] \n", 19); + written += t2pWriteFile(output, (tdata_t) "/Range [0.0 1.0] \n", 18); + buflen=sprintf(buffer, "/Size [%u] \n", (1<tiff_bitspersample)); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "/BitsPerSample 16 \n", 19); + written += t2p_write_pdf_stream_dict(((tsize_t)1)<<(t2p->tiff_bitspersample+1), 0, output); + + return(written); +} + +tsize_t t2p_write_pdf_transfer_stream(T2P* t2p, TIFF* output, uint16 i){ + + tsize_t written=0; + + written += t2p_write_pdf_stream( + t2p->tiff_transferfunction[i], + (((tsize_t)1)<<(t2p->tiff_bitspersample+1)), + output); + + return(written); +} + +/* + This function writes a PDF Image XObject Colorspace array to output. +*/ + +tsize_t t2p_write_pdf_xobject_calcs(T2P* t2p, TIFF* output){ + + tsize_t written=0; + char buffer[128]; + int buflen=0; + + float X_W=0.0; + float Y_W=0.0; + float Z_W=0.0; + float X_R=0.0; + float Y_R=0.0; + float Z_R=0.0; + float X_G=0.0; + float Y_G=0.0; + float Z_G=0.0; + float X_B=0.0; + float Y_B=0.0; + float Z_B=0.0; + float x_w=0.0; + float y_w=0.0; + float z_w=0.0; + float x_r=0.0; + float y_r=0.0; + float x_g=0.0; + float y_g=0.0; + float x_b=0.0; + float y_b=0.0; + float R=1.0; + float G=1.0; + float B=1.0; + + written += t2pWriteFile(output, (tdata_t) "[", 1); + if(t2p->pdf_colorspace & T2P_CS_CALGRAY){ + written += t2pWriteFile(output, (tdata_t) "/CalGray ", 9); + X_W = t2p->tiff_whitechromaticities[0]; + Y_W = t2p->tiff_whitechromaticities[1]; + Z_W = 1.0F - (X_W + Y_W); + X_W /= Y_W; + Z_W /= Y_W; + Y_W = 1.0F; + } + if(t2p->pdf_colorspace & T2P_CS_CALRGB){ + written += t2pWriteFile(output, (tdata_t) "/CalRGB ", 8); + x_w = t2p->tiff_whitechromaticities[0]; + y_w = t2p->tiff_whitechromaticities[1]; + x_r = t2p->tiff_primarychromaticities[0]; + y_r = t2p->tiff_primarychromaticities[1]; + x_g = t2p->tiff_primarychromaticities[2]; + y_g = t2p->tiff_primarychromaticities[3]; + x_b = t2p->tiff_primarychromaticities[4]; + y_b = t2p->tiff_primarychromaticities[5]; + z_w = y_w * ((x_g - x_b)*y_r - (x_r-x_b)*y_g + (x_r-x_g)*y_b); + Y_R = (y_r/R) * ((x_g-x_b)*y_w - (x_w-x_b)*y_g + (x_w-x_g)*y_b) / z_w; + X_R = Y_R * x_r / y_r; + Z_R = Y_R * (((1-x_r)/y_r)-1); + Y_G = ((0.0F-(y_g))/G) * ((x_r-x_b)*y_w - (x_w-x_b)*y_r + (x_w-x_r)*y_b) / z_w; + X_G = Y_G * x_g / y_g; + Z_G = Y_G * (((1-x_g)/y_g)-1); + Y_B = (y_b/B) * ((x_r-x_g)*y_w - (x_w-x_g)*y_r + (x_w-x_r)*y_g) / z_w; + X_B = Y_B * x_b / y_b; + Z_B = Y_B * (((1-x_b)/y_b)-1); + X_W = (X_R * R) + (X_G * G) + (X_B * B); + Y_W = (Y_R * R) + (Y_G * G) + (Y_B * B); + Z_W = (Z_R * R) + (Z_G * G) + (Z_B * B); + X_W /= Y_W; + Z_W /= Y_W; + Y_W = 1.0; + } + written += t2pWriteFile(output, (tdata_t) "<< \n", 4); + if(t2p->pdf_colorspace & T2P_CS_CALGRAY){ + written += t2pWriteFile(output, (tdata_t) "/WhitePoint ", 12); + buflen=sprintf(buffer, "[%.4f %.4f %.4f] \n", X_W, Y_W, Z_W); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "/Gamma 2.2 \n", 12); + } + if(t2p->pdf_colorspace & T2P_CS_CALRGB){ + written += t2pWriteFile(output, (tdata_t) "/WhitePoint ", 12); + buflen=sprintf(buffer, "[%.4f %.4f %.4f] \n", X_W, Y_W, Z_W); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "/Matrix ", 8); + buflen=sprintf(buffer, "[%.4f %.4f %.4f %.4f %.4f %.4f %.4f %.4f %.4f] \n", + X_R, Y_R, Z_R, + X_G, Y_G, Z_G, + X_B, Y_B, Z_B); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "/Gamma [2.2 2.2 2.2] \n", 22); + } + written += t2pWriteFile(output, (tdata_t) ">>] \n", 5); + + return(written); +} + +/* + This function writes a PDF Image XObject Colorspace array to output. +*/ + +tsize_t t2p_write_pdf_xobject_icccs(T2P* t2p, TIFF* output){ + + tsize_t written=0; + char buffer[16]; + int buflen=0; + + written += t2pWriteFile(output, (tdata_t) "[/ICCBased ", 11); + buflen=sprintf(buffer, "%lu", (unsigned long)t2p->pdf_icccs); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " 0 R] \n", 7); + + return(written); +} + +tsize_t t2p_write_pdf_xobject_icccs_dict(T2P* t2p, TIFF* output){ + + tsize_t written=0; + char buffer[16]; + int buflen=0; + + written += t2pWriteFile(output, (tdata_t) "/N ", 3); + buflen=sprintf(buffer, "%u \n", t2p->tiff_samplesperpixel); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) "/Alternate ", 11); + t2p->pdf_colorspace ^= T2P_CS_ICCBASED; + written += t2p_write_pdf_xobject_cs(t2p, output); + t2p->pdf_colorspace |= T2P_CS_ICCBASED; + written += t2p_write_pdf_stream_dict(t2p->tiff_iccprofilelength, 0, output); + + return(written); +} + +tsize_t t2p_write_pdf_xobject_icccs_stream(T2P* t2p, TIFF* output){ + + tsize_t written=0; + + written += t2p_write_pdf_stream( + (tdata_t) t2p->tiff_iccprofile, + (tsize_t) t2p->tiff_iccprofilelength, + output); + + return(written); +} + +/* + This function writes a palette stream for an indexed color space to output. +*/ + +tsize_t t2p_write_pdf_xobject_palettecs_stream(T2P* t2p, TIFF* output){ + + tsize_t written=0; + + written += t2p_write_pdf_stream( + (tdata_t) t2p->pdf_palette, + (tsize_t) t2p->pdf_palettesize, + output); + + return(written); +} + +/* + This function writes a PDF Image XObject Decode array to output. +*/ + +tsize_t t2p_write_pdf_xobject_decode(T2P* t2p, TIFF* output){ + + tsize_t written=0; + int i=0; + + written += t2pWriteFile(output, (tdata_t) "/Decode [ ", 10); + for (i=0;itiff_samplesperpixel;i++){ + written += t2pWriteFile(output, (tdata_t) "1 0 ", 4); + } + written += t2pWriteFile(output, (tdata_t) "]\n", 2); + + return(written); +} + +/* + This function writes a PDF Image XObject stream filter name and parameters to + output. +*/ + +tsize_t t2p_write_pdf_xobject_stream_filter(ttile_t tile, T2P* t2p, TIFF* output){ + + tsize_t written=0; + char buffer[16]; + int buflen=0; + + if(t2p->pdf_compression==T2P_COMPRESS_NONE){ + return(written); + } + written += t2pWriteFile(output, (tdata_t) "/Filter ", 8); + switch(t2p->pdf_compression){ +#ifdef CCITT_SUPPORT + case T2P_COMPRESS_G4: + written += t2pWriteFile(output, (tdata_t) "/CCITTFaxDecode ", 16); + written += t2pWriteFile(output, (tdata_t) "/DecodeParms ", 13); + written += t2pWriteFile(output, (tdata_t) "<< /K -1 ", 9); + if(tile==0){ + written += t2pWriteFile(output, (tdata_t) "/Columns ", 9); + buflen=sprintf(buffer, "%lu", + (unsigned long)t2p->tiff_width); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " /Rows ", 7); + buflen=sprintf(buffer, "%lu", + (unsigned long)t2p->tiff_length); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + } else { + if(t2p_tile_is_right_edge(t2p->tiff_tiles[t2p->pdf_page], tile-1)==0){ + written += t2pWriteFile(output, (tdata_t) "/Columns ", 9); + buflen=sprintf( + buffer, + "%lu", + (unsigned long)t2p->tiff_tiles[t2p->pdf_page].tiles_tilewidth); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + } else { + written += t2pWriteFile(output, (tdata_t) "/Columns ", 9); + buflen=sprintf( + buffer, + "%lu", + (unsigned long)t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilewidth); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + } + if(t2p_tile_is_bottom_edge(t2p->tiff_tiles[t2p->pdf_page], tile-1)==0){ + written += t2pWriteFile(output, (tdata_t) " /Rows ", 7); + buflen=sprintf( + buffer, + "%lu", + (unsigned long)t2p->tiff_tiles[t2p->pdf_page].tiles_tilelength); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + } else { + written += t2pWriteFile(output, (tdata_t) " /Rows ", 7); + buflen=sprintf( + buffer, + "%lu", + (unsigned long)t2p->tiff_tiles[t2p->pdf_page].tiles_edgetilelength); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + } + } + if(t2p->pdf_switchdecode == 0){ + written += t2pWriteFile(output, (tdata_t) " /BlackIs1 true ", 16); + } + written += t2pWriteFile(output, (tdata_t) ">>\n", 3); + break; +#endif +#ifdef JPEG_SUPPORT + case T2P_COMPRESS_JPEG: + written += t2pWriteFile(output, (tdata_t) "/DCTDecode ", 11); + + if(t2p->tiff_photometric != PHOTOMETRIC_YCBCR) { + written += t2pWriteFile(output, (tdata_t) "/DecodeParms ", 13); + written += t2pWriteFile(output, (tdata_t) "<< /ColorTransform 0 >>\n", 24); + } + break; +#endif +#ifdef ZIP_SUPPORT + case T2P_COMPRESS_ZIP: + written += t2pWriteFile(output, (tdata_t) "/FlateDecode ", 13); + if(t2p->pdf_compressionquality%100){ + written += t2pWriteFile(output, (tdata_t) "/DecodeParms ", 13); + written += t2pWriteFile(output, (tdata_t) "<< /Predictor ", 14); + _TIFFmemset(buffer, 0x00, 16); + buflen=sprintf(buffer, "%u", t2p->pdf_compressionquality%100); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " /Columns ", 10); + _TIFFmemset(buffer, 0x00, 16); + buflen = sprintf(buffer, "%lu", + (unsigned long)t2p->tiff_width); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " /Colors ", 9); + _TIFFmemset(buffer, 0x00, 16); + buflen=sprintf(buffer, "%u", t2p->tiff_samplesperpixel); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " /BitsPerComponent ", 19); + _TIFFmemset(buffer, 0x00, 16); + buflen=sprintf(buffer, "%u", t2p->tiff_bitspersample); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) ">>\n", 3); + } + break; +#endif + default: + break; + } + + return(written); +} + +/* + This function writes a PDF xref table to output. +*/ + +tsize_t t2p_write_pdf_xreftable(T2P* t2p, TIFF* output){ + + tsize_t written=0; + char buffer[21]; + int buflen=0; + uint32 i=0; + + written += t2pWriteFile(output, (tdata_t) "xref\n0 ", 7); + buflen=sprintf(buffer, "%lu", (unsigned long)(t2p->pdf_xrefcount + 1)); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + written += t2pWriteFile(output, (tdata_t) " \n0000000000 65535 f \n", 22); + for (i=0;ipdf_xrefcount;i++){ + sprintf(buffer, "%.10lu 00000 n \n", + (unsigned long)t2p->pdf_xrefoffsets[i]); + written += t2pWriteFile(output, (tdata_t) buffer, 20); + } + + return(written); +} + +/* + * This function writes a PDF trailer to output. + */ + +tsize_t t2p_write_pdf_trailer(T2P* t2p, TIFF* output) +{ + + tsize_t written = 0; + char buffer[32]; + int buflen = 0; + size_t i = 0; + + for (i = 0; i < sizeof(t2p->pdf_fileid) - 8; i += 8) + snprintf(t2p->pdf_fileid + i, 9, "%.8X", rand()); + + written += t2pWriteFile(output, (tdata_t) "trailer\n<<\n/Size ", 17); + buflen = sprintf(buffer, "%lu", (unsigned long)(t2p->pdf_xrefcount+1)); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + _TIFFmemset(buffer, 0x00, 32); + written += t2pWriteFile(output, (tdata_t) "\n/Root ", 7); + buflen=sprintf(buffer, "%lu", (unsigned long)t2p->pdf_catalog); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + _TIFFmemset(buffer, 0x00, 32); + written += t2pWriteFile(output, (tdata_t) " 0 R \n/Info ", 12); + buflen=sprintf(buffer, "%lu", (unsigned long)t2p->pdf_info); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + _TIFFmemset(buffer, 0x00, 32); + written += t2pWriteFile(output, (tdata_t) " 0 R \n/ID[<", 11); + written += t2pWriteFile(output, (tdata_t) t2p->pdf_fileid, + sizeof(t2p->pdf_fileid) - 1); + written += t2pWriteFile(output, (tdata_t) "><", 2); + written += t2pWriteFile(output, (tdata_t) t2p->pdf_fileid, + sizeof(t2p->pdf_fileid) - 1); + written += t2pWriteFile(output, (tdata_t) ">]\n>>\nstartxref\n", 16); + buflen=sprintf(buffer, "%lu", (unsigned long)t2p->pdf_startxref); + written += t2pWriteFile(output, (tdata_t) buffer, buflen); + _TIFFmemset(buffer, 0x00, 32); + written += t2pWriteFile(output, (tdata_t) "\n%%EOF\n", 7); + + return(written); +} + +/* + + This function writes a PDF to a file given a pointer to a TIFF. + + The idea with using a TIFF* as output for a PDF file is that the file + can be created with TIFFClientOpen for memory-mapped use within the TIFF + library, and TIFFWriteEncodedStrip can be used to write compressed data to + the output. The output is not actually a TIFF file, it is a PDF file. + + This function uses only t2pWriteFile and TIFFWriteEncodedStrip to write to + the output TIFF file. When libtiff would otherwise be writing data to the + output file, the write procedure of the TIFF structure is replaced with an + empty implementation. + + The first argument to the function is an initialized and validated T2P + context struct pointer. + + The second argument to the function is the TIFF* that is the input that has + been opened for reading and no other functions have been called upon it. + + The third argument to the function is the TIFF* that is the output that has + been opened for writing. It has to be opened so that it hasn't written any + data to the output. If the output is seekable then it's OK to seek to the + beginning of the file. The function only writes to the output PDF and does + not seek. See the example usage in the main() function. + + TIFF* output = TIFFOpen("output.pdf", "w"); + assert(output != NULL); + + if(output->tif_seekproc != NULL){ + t2pSeekFile(output, (toff_t) 0, SEEK_SET); + } + + This function returns the file size of the output PDF file. On error it + returns zero and the t2p->t2p_error variable is set to T2P_ERR_ERROR. + + After this function completes, call t2p_free on t2p, TIFFClose on input, + and TIFFClose on output. +*/ + +tsize_t t2p_write_pdf(T2P* t2p, TIFF* input, TIFF* output){ + + tsize_t written=0; + ttile_t i2=0; + tsize_t streamlen=0; + uint16 i=0; + + t2p_read_tiff_init(t2p, input); + if(t2p->t2p_error!=T2P_ERR_OK){return(0);} + t2p->pdf_xrefoffsets= (uint32*) _TIFFmalloc(t2p->pdf_xrefcount * sizeof(uint32) ); + if(t2p->pdf_xrefoffsets==NULL){ + TIFFError( + TIFF2PDF_MODULE, + "Can't allocate %u bytes of memory for t2p_write_pdf", + (unsigned int) (t2p->pdf_xrefcount * sizeof(uint32)) ); + t2p->t2p_error = T2P_ERR_ERROR; + return(written); + } + t2p->pdf_xrefcount=0; + t2p->pdf_catalog=1; + t2p->pdf_info=2; + t2p->pdf_pages=3; + written += t2p_write_pdf_header(t2p, output); + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + t2p->pdf_catalog=t2p->pdf_xrefcount; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_catalog(t2p, output); + written += t2p_write_pdf_obj_end(output); + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + t2p->pdf_info=t2p->pdf_xrefcount; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_info(t2p, input, output); + written += t2p_write_pdf_obj_end(output); + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + t2p->pdf_pages=t2p->pdf_xrefcount; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_pages(t2p, output); + written += t2p_write_pdf_obj_end(output); + for(t2p->pdf_page=0;t2p->pdf_pagetiff_pagecount;t2p->pdf_page++){ + t2p_read_tiff_data(t2p, input); + if(t2p->t2p_error!=T2P_ERR_OK){return(0);} + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_page(t2p->pdf_xrefcount, t2p, output); + written += t2p_write_pdf_obj_end(output); + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_stream_dict_start(output); + written += t2p_write_pdf_stream_dict(0, t2p->pdf_xrefcount+1, output); + written += t2p_write_pdf_stream_dict_end(output); + written += t2p_write_pdf_stream_start(output); + streamlen=written; + written += t2p_write_pdf_page_content_stream(t2p, output); + streamlen=written-streamlen; + written += t2p_write_pdf_stream_end(output); + written += t2p_write_pdf_obj_end(output); + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_stream_length(streamlen, output); + written += t2p_write_pdf_obj_end(output); + if(t2p->tiff_transferfunctioncount != 0){ + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_transfer(t2p, output); + written += t2p_write_pdf_obj_end(output); + for(i=0; i < t2p->tiff_transferfunctioncount; i++){ + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_stream_dict_start(output); + written += t2p_write_pdf_transfer_dict(t2p, output, i); + written += t2p_write_pdf_stream_dict_end(output); + written += t2p_write_pdf_stream_start(output); + streamlen=written; + written += t2p_write_pdf_transfer_stream(t2p, output, i); + streamlen=written-streamlen; + written += t2p_write_pdf_stream_end(output); + written += t2p_write_pdf_obj_end(output); + } + } + if( (t2p->pdf_colorspace & T2P_CS_PALETTE) != 0){ + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + t2p->pdf_palettecs=t2p->pdf_xrefcount; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_stream_dict_start(output); + written += t2p_write_pdf_stream_dict(t2p->pdf_palettesize, 0, output); + written += t2p_write_pdf_stream_dict_end(output); + written += t2p_write_pdf_stream_start(output); + streamlen=written; + written += t2p_write_pdf_xobject_palettecs_stream(t2p, output); + streamlen=written-streamlen; + written += t2p_write_pdf_stream_end(output); + written += t2p_write_pdf_obj_end(output); + } + if( (t2p->pdf_colorspace & T2P_CS_ICCBASED) != 0){ + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + t2p->pdf_icccs=t2p->pdf_xrefcount; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_stream_dict_start(output); + written += t2p_write_pdf_xobject_icccs_dict(t2p, output); + written += t2p_write_pdf_stream_dict_end(output); + written += t2p_write_pdf_stream_start(output); + streamlen=written; + written += t2p_write_pdf_xobject_icccs_stream(t2p, output); + streamlen=written-streamlen; + written += t2p_write_pdf_stream_end(output); + written += t2p_write_pdf_obj_end(output); + } + if(t2p->tiff_tiles[t2p->pdf_page].tiles_tilecount !=0){ + for(i2=0;i2tiff_tiles[t2p->pdf_page].tiles_tilecount;i2++){ + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_stream_dict_start(output); + written += t2p_write_pdf_xobject_stream_dict( + i2+1, + t2p, + output); + written += t2p_write_pdf_stream_dict_end(output); + written += t2p_write_pdf_stream_start(output); + streamlen=written; + t2p_read_tiff_size_tile(t2p, input, i2); + written += t2p_readwrite_pdf_image_tile(t2p, input, output, i2); + t2p_write_advance_directory(t2p, output); + if(t2p->t2p_error!=T2P_ERR_OK){return(0);} + streamlen=written-streamlen; + written += t2p_write_pdf_stream_end(output); + written += t2p_write_pdf_obj_end(output); + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_stream_length(streamlen, output); + written += t2p_write_pdf_obj_end(output); + } + } else { + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_stream_dict_start(output); + written += t2p_write_pdf_xobject_stream_dict( + 0, + t2p, + output); + written += t2p_write_pdf_stream_dict_end(output); + written += t2p_write_pdf_stream_start(output); + streamlen=written; + t2p_read_tiff_size(t2p, input); + written += t2p_readwrite_pdf_image(t2p, input, output); + t2p_write_advance_directory(t2p, output); + if(t2p->t2p_error!=T2P_ERR_OK){return(0);} + streamlen=written-streamlen; + written += t2p_write_pdf_stream_end(output); + written += t2p_write_pdf_obj_end(output); + t2p->pdf_xrefoffsets[t2p->pdf_xrefcount++]=written; + written += t2p_write_pdf_obj_start(t2p->pdf_xrefcount, output); + written += t2p_write_pdf_stream_length(streamlen, output); + written += t2p_write_pdf_obj_end(output); + } + } + t2p->pdf_startxref = written; + written += t2p_write_pdf_xreftable(t2p, output); + written += t2p_write_pdf_trailer(t2p, output); + t2p_disable(output); + + return(written); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiff2ps.c b/src/SDL2/external/tiff-4.0.3/tools/tiff2ps.c new file mode 100644 index 000000000..372230a9a --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiff2ps.c @@ -0,0 +1,3073 @@ +/* $Id: tiff2ps.c,v 1.49 2011-05-31 17:10:18 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include /* for atof */ +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +/* + * Revision history + * + * 2010-Sep-17 + * Richard Nolde: Reinstate code from Feb 2009 that never got + * accepted into CVS with major modifications to handle -H and -W + * options. Replaced original PlaceImage function with several + * new functions that make support for multiple output pages + * from a single image easier to understand. Added additional + * warning messages for incompatible command line options. + * Add new command line options to specify PageOrientation + * Document Structuring Comment for landscape or portrait + * and code to determine the values from ouput width and height + * if not specified on the command line. + * Add new command line option to specify document creator + * as an alterntive to the string "tiff2ps" following model + * of patch submitted by Thomas Jarosch for specifiying a + * document title which is also supported now. + * + * 2009-Feb-11 + * Richard Nolde: Added support for rotations of 90, 180, 270 + * and auto using -r <90|180|270|auto>. Auto picks the best + * fit for the image on the specified paper size (eg portrait + * or landscape) if -h or -w is specified. Rotation is in + * degrees counterclockwise since that is how Postscript does + * it. The auto opption rotates the image 90 degrees ccw to + * produce landscape if that is a better fit than portait. + * + * Cleaned up code in TIFF2PS and broke into smaller functions + * to simplify rotations. + * + * Identified incompatible options and returned errors, eg + * -i for imagemask operator is only available for Level2 or + * Level3 Postscript in the current implmentation since there + * is a difference in the way the operands are called for Level1 + * and there is no function to provide the Level1 version. + * -H was not handled properly if -h and/or -w were specified. + * It should only clip the masked images if the scaled image + * exceeds the maxPageHeight specified with -H. + * + * New design allows for all of the following combinations: + * Conversion of TIFF to Postscript with optional rotations + * of 90, 180, 270, or auto degrees counterclockwise + * Conversion of TIFF to Postscript with entire image scaled + * to maximum of values spedified with -h or -w while + * maintaining aspect ratio. Same rotations apply. + * Conversion of TIFF to Postscript with clipping of output + * viewport to height specified with -H, producing multiple + * pages at this height and original width as needed. + * Same rotations apply. + * Conversion of TIFF to Postscript with image scaled to + * maximum specified by -h and -w and the resulting scaled + * image is presented in an output viewport clipped by -H height. + * The same rotations apply. + * + * Added maxPageWidth option using -W flag. MaxPageHeight and + * MaxPageWidth are mutually exclusive since the aspect ratio + * cannot be maintained if you set both. + * Rewrote PlaceImage to allow maxPageHeight and maxPageWidth + * options to work with values smaller or larger than the + * physical paper size and still preserve the aspect ratio. + * This is accomplished by creating multiple pages across + * as well as down if need be. + * + * 2001-Mar-21 + * I (Bruce A. Mallett) added this revision history comment ;) + * + * Fixed PS_Lvl2page() code which outputs non-ASCII85 raw + * data. Moved test for when to output a line break to + * *after* the output of a character. This just serves + * to fix an eye-nuisance where the first line of raw + * data was one character shorter than subsequent lines. + * + * Added an experimental ASCII85 encoder which can be used + * only when there is a single buffer of bytes to be encoded. + * This version is much faster at encoding a straight-line + * buffer of data because it can avoid a lot of the loop + * overhead of the byte-by-byte version. To use this version + * you need to define EXP_ASCII85ENCODER (experimental ...). + * + * Added bug fix given by Michael Schmidt to PS_Lvl2page() + * in which an end-of-data marker ('>') was not being output + * when producing non-ASCII85 encoded PostScript Level 2 + * data. + * + * Fixed PS_Lvl2colorspace() so that it no longer assumes that + * a TIFF having more than 2 planes is a CMYK. This routine + * no longer looks at the samples per pixel but instead looks + * at the "photometric" value. This change allows support of + * CMYK TIFFs. + * + * Modified the PostScript L2 imaging loop so as to test if + * the input stream is still open before attempting to do a + * flushfile on it. This was done because some RIPs close + * the stream after doing the image operation. + * + * Got rid of the realloc() being done inside a loop in the + * PSRawDataBW() routine. The code now walks through the + * byte-size array outside the loop to determine the largest + * size memory block that will be needed. + * + * Added "-m" switch to ask tiff2ps to, where possible, use the + * "imagemask" operator instead of the "image" operator. + * + * Added the "-i #" switch to allow interpolation to be disabled. + * + * Unrolled a loop or two to improve performance. + */ + +/* + * Define EXP_ASCII85ENCODER if you want to use an experimental + * version of the ASCII85 encoding routine. The advantage of + * using this routine is that tiff2ps will convert to ASCII85 + * encoding at between 3 and 4 times the speed as compared to + * using the old (non-experimental) encoder. The disadvantage + * is that you will be using a new (and unproven) encoding + * routine. So user beware, you have been warned! + */ + +#define EXP_ASCII85ENCODER + +/* + * NB: this code assumes uint32 works with printf's %l[ud]. + */ +#ifndef TRUE +#define TRUE 1 +#define FALSE 0 +#endif + +int ascii85 = FALSE; /* use ASCII85 encoding */ +int interpolate = TRUE; /* interpolate level2 image */ +int level2 = FALSE; /* generate PostScript level 2 */ +int level3 = FALSE; /* generate PostScript level 3 */ +int printAll = FALSE; /* print all images in file */ +int generateEPSF = TRUE; /* generate Encapsulated PostScript */ +int PSduplex = FALSE; /* enable duplex printing */ +int PStumble = FALSE; /* enable top edge binding */ +int PSavoiddeadzone = TRUE; /* enable avoiding printer deadzone */ +double maxPageHeight = 0; /* maximum height to select from image and print per page */ +double maxPageWidth = 0; /* maximum width to select from image and print per page */ +double splitOverlap = 0; /* amount for split pages to overlag */ +int rotation = 0; /* optional value for rotation angle */ +int auto_rotate = 0; /* rotate image for best fit on the page */ +char *filename = NULL; /* input filename */ +char *title = NULL; /* optional document title string */ +char *creator = NULL; /* optional document creator string */ +char pageOrientation[12]; /* set optional PageOrientation DSC to Landscape or Portrait */ +int useImagemask = FALSE; /* Use imagemask instead of image operator */ +uint16 res_unit = 0; /* Resolution units: 2 - inches, 3 - cm */ + +/* + * ASCII85 Encoding Support. + */ +unsigned char ascii85buf[10]; +int ascii85count; +int ascii85breaklen; + +int TIFF2PS(FILE*, TIFF*, double, double, double, double, int); +void PSpage(FILE*, TIFF*, uint32, uint32); +void PSColorContigPreamble(FILE*, uint32, uint32, int); +void PSColorSeparatePreamble(FILE*, uint32, uint32, int); +void PSDataColorContig(FILE*, TIFF*, uint32, uint32, int); +void PSDataColorSeparate(FILE*, TIFF*, uint32, uint32, int); +void PSDataPalette(FILE*, TIFF*, uint32, uint32); +void PSDataBW(FILE*, TIFF*, uint32, uint32); +void PSRawDataBW(FILE*, TIFF*, uint32, uint32); +void Ascii85Init(void); +void Ascii85Put(unsigned char code, FILE* fd); +void Ascii85Flush(FILE* fd); +void PSHead(FILE*, double, double, double, double); +void PSTail(FILE*, int); +int psStart(FILE *, int, int, int *, double *, double, double, double, + double, double, double, double, double, double, double); +int psPageSize(FILE *, int, double, double, double, double, double, double); +int psRotateImage(FILE *, int, double, double, double, double); +int psMaskImage(FILE *, TIFF *, int, int, int *, double, double, + double, double, double, double, double, double, double); +int psScaleImage(FILE *, double, int, int, double, double, double, double, + double, double); +int get_viewport (double, double, double, double, double *, double *, int); +int exportMaskedImage(FILE *, double, double, double, double, int, int, + double, double, double, int, int); + +#if defined( EXP_ASCII85ENCODER) +tsize_t Ascii85EncodeBlock( uint8 * ascii85_p, unsigned f_eod, const uint8 * raw_p, tsize_t raw_l ); +#endif + +static void usage(int); + +int +main(int argc, char* argv[]) +{ + int dirnum = -1, c, np = 0; + int centered = 0; + double bottommargin = 0; + double leftmargin = 0; + double pageWidth = 0; + double pageHeight = 0; + uint32 diroff = 0; + extern char *optarg; + extern int optind; + FILE* output = stdout; + + pageOrientation[0] = '\0'; + + while ((c = getopt(argc, argv, "b:d:h:H:W:L:i:w:l:o:O:P:C:r:t:acemxyzps1238DT")) != -1) + switch (c) { + case 'b': + bottommargin = atof(optarg); + break; + case 'c': + centered = 1; + break; + case 'C': + creator = optarg; + break; + case 'd': /* without -a, this only processes one image at this IFD */ + dirnum = atoi(optarg); + break; + case 'D': + PSduplex = TRUE; + break; + case 'i': + interpolate = atoi(optarg) ? TRUE:FALSE; + break; + case 'T': + PStumble = TRUE; + break; + case 'e': + PSavoiddeadzone = FALSE; + generateEPSF = TRUE; + break; + case 'h': + pageHeight = atof(optarg); + break; + case 'H': + maxPageHeight = atof(optarg); + break; + case 'W': + maxPageWidth = atof(optarg); + break; + case 'L': + splitOverlap = atof(optarg); + break; + case 'm': + useImagemask = TRUE; + break; + case 'o': + switch (optarg[0]) + { + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + case '8': + case '9': diroff = (uint32) strtoul(optarg, NULL, 0); + break; + default: TIFFError ("-o", "Offset must be a numeric value."); + exit (1); + } + break; + case 'O': /* XXX too bad -o is already taken */ + output = fopen(optarg, "w"); + if (output == NULL) { + fprintf(stderr, + "%s: %s: Cannot open output file.\n", + argv[0], optarg); + exit(-2); + } + break; + case 'P': + switch (optarg[0]) + { + case 'l': + case 'L': strcpy (pageOrientation, "Landscape"); + break; + case 'p': + case 'P': strcpy (pageOrientation, "Portrait"); + break; + default: TIFFError ("-P", "Page orientation must be Landscape or Portrait"); + exit (-1); + } + break; + case 'l': + leftmargin = atof(optarg); + break; + case 'a': /* removed fall through to generate warning below, R Nolde 09-01-2010 */ + printAll = TRUE; + break; + case 'p': + generateEPSF = FALSE; + break; + case 'r': + if (strcmp (optarg, "auto") == 0) + { + rotation = 0; + auto_rotate = TRUE; + } + else + { + rotation = atoi(optarg); + auto_rotate = FALSE; + } + switch (rotation) + { + case 0: + case 90: + case 180: + case 270: + break; + default: + fprintf (stderr, "Rotation angle must be 90, 180, 270 (degrees ccw) or auto\n"); + exit (-1); + } + break; + case 's': + printAll = FALSE; + break; + case 't': + title = optarg; + break; + case 'w': + pageWidth = atof(optarg); + break; + case 'z': + PSavoiddeadzone = FALSE; + break; + case '1': + level2 = FALSE; + level3 = FALSE; + ascii85 = FALSE; + break; + case '2': + level2 = TRUE; + ascii85 = TRUE; /* default to yes */ + break; + case '3': + level3 = TRUE; + ascii85 = TRUE; /* default to yes */ + break; + case '8': + ascii85 = FALSE; + break; + case 'x': + res_unit = RESUNIT_CENTIMETER; + break; + case 'y': + res_unit = RESUNIT_INCH; + break; + case '?': + usage(-1); + } + + if (useImagemask == TRUE) + { + if ((level2 == FALSE) && (level3 == FALSE)) + { + TIFFError ("-m "," imagemask operator requres Postscript Level2 or Level3"); + exit (1); + } + } + + if (pageWidth && (maxPageWidth > pageWidth)) + { + TIFFError ("-W", "Max viewport width cannot exceed page width"); + exit (1); + } + + if (pageHeight && (maxPageHeight > pageHeight)) + { + TIFFError ("-H", "Max viewport height cannot exceed page height"); + exit (1); + } + + /* auto rotate requires a specified page width and height */ + if (auto_rotate == TRUE) + { + if ((pageWidth == 0) || (pageHeight == 0)) + TIFFWarning ("-r auto", " requires page height and width specified with -h and -w"); + + if ((maxPageWidth > 0) || (maxPageHeight > 0)) + { + TIFFError ("-r auto", " is incompatible with maximum page width/height specified by -H or -W"); + exit (1); + } + } + if ((maxPageWidth > 0) && (maxPageHeight > 0)) + { + TIFFError ("-H and -W", " Use only one of -H or -W to define a viewport"); + exit (1); + } + + if ((generateEPSF == TRUE) && (printAll == TRUE)) + { + TIFFError(" -e and -a", "Warning: Cannot generate Encapsulated Postscript for multiple images"); + generateEPSF = FALSE; + } + + if ((generateEPSF == TRUE) && (PSduplex == TRUE)) + { + TIFFError(" -e and -D", "Warning: Encapsulated Postscript does not support Duplex option"); + PSduplex = FALSE; + } + + if ((generateEPSF == TRUE) && (PStumble == TRUE)) + { + TIFFError(" -e and -T", "Warning: Encapsulated Postscript does not support Top Edge Binding option"); + PStumble = FALSE; + } + + if ((generateEPSF == TRUE) && (PSavoiddeadzone == TRUE)) + PSavoiddeadzone = FALSE; + + for (; argc - optind > 0; optind++) { + TIFF* tif = TIFFOpen(filename = argv[optind], "r"); + if (tif != NULL) { + if (dirnum != -1 + && !TIFFSetDirectory(tif, (tdir_t)dirnum)) + return (-1); + else if (diroff != 0 && + !TIFFSetSubDirectory(tif, diroff)) + return (-1); + np = TIFF2PS(output, tif, pageWidth, pageHeight, + leftmargin, bottommargin, centered); + if (np < 0) + { + TIFFError("Error", "Unable to process %s", filename); + } + TIFFClose(tif); + } + } + if (np) + PSTail(output, np); + else + usage(-1); + if (output != stdout) + fclose(output); + return (0); +} + +static uint16 samplesperpixel; +static uint16 bitspersample; +static uint16 planarconfiguration; +static uint16 photometric; +static uint16 compression; +static uint16 extrasamples; +static int alpha; + +static int +checkImage(TIFF* tif) +{ + switch (photometric) { + case PHOTOMETRIC_YCBCR: + if ((compression == COMPRESSION_JPEG || compression == COMPRESSION_OJPEG) + && planarconfiguration == PLANARCONFIG_CONTIG) { + /* can rely on libjpeg to convert to RGB */ + TIFFSetField(tif, TIFFTAG_JPEGCOLORMODE, + JPEGCOLORMODE_RGB); + photometric = PHOTOMETRIC_RGB; + } else { + if (level2 || level3) + break; + TIFFError(filename, "Can not handle image with %s", + "PhotometricInterpretation=YCbCr"); + return (0); + } + /* fall thru... */ + case PHOTOMETRIC_RGB: + if (alpha && bitspersample != 8) { + TIFFError(filename, + "Can not handle %d-bit/sample RGB image with alpha", + bitspersample); + return (0); + } + /* fall thru... */ + case PHOTOMETRIC_SEPARATED: + case PHOTOMETRIC_PALETTE: + case PHOTOMETRIC_MINISBLACK: + case PHOTOMETRIC_MINISWHITE: + break; + case PHOTOMETRIC_LOGL: + case PHOTOMETRIC_LOGLUV: + if (compression != COMPRESSION_SGILOG && + compression != COMPRESSION_SGILOG24) { + TIFFError(filename, + "Can not handle %s data with compression other than SGILog", + (photometric == PHOTOMETRIC_LOGL) ? + "LogL" : "LogLuv" + ); + return (0); + } + /* rely on library to convert to RGB/greyscale */ + TIFFSetField(tif, TIFFTAG_SGILOGDATAFMT, SGILOGDATAFMT_8BIT); + photometric = (photometric == PHOTOMETRIC_LOGL) ? + PHOTOMETRIC_MINISBLACK : PHOTOMETRIC_RGB; + bitspersample = 8; + break; + case PHOTOMETRIC_CIELAB: + /* fall thru... */ + default: + TIFFError(filename, + "Can not handle image with PhotometricInterpretation=%d", + photometric); + return (0); + } + switch (bitspersample) { + case 1: case 2: + case 4: case 8: + case 16: + break; + default: + TIFFError(filename, "Can not handle %d-bit/sample image", + bitspersample); + return (0); + } + if (planarconfiguration == PLANARCONFIG_SEPARATE && extrasamples > 0) + TIFFWarning(filename, "Ignoring extra samples"); + return (1); +} + +#define PS_UNIT_SIZE 72.0F +#define PSUNITS(npix,res) ((npix) * (PS_UNIT_SIZE / (res))) + +static char RGBcolorimage[] = "\ +/bwproc {\n\ + rgbproc\n\ + dup length 3 idiv string 0 3 0\n\ + 5 -1 roll {\n\ + add 2 1 roll 1 sub dup 0 eq {\n\ + pop 3 idiv\n\ + 3 -1 roll\n\ + dup 4 -1 roll\n\ + dup 3 1 roll\n\ + 5 -1 roll put\n\ + 1 add 3 0\n\ + } { 2 1 roll } ifelse\n\ + } forall\n\ + pop pop pop\n\ +} def\n\ +/colorimage where {pop} {\n\ + /colorimage {pop pop /rgbproc exch def {bwproc} image} bind def\n\ +} ifelse\n\ +"; + +/* + * Adobe Photoshop requires a comment line of the form: + * + * %ImageData:

    + * <1 for binary|2 for hex> "data start" + * + * It is claimed to be part of some future revision of the EPS spec. + */ +static void +PhotoshopBanner(FILE* fd, uint32 w, uint32 h, int bs, int nc, char* startline) +{ + fprintf(fd, "%%ImageData: %ld %ld %d %d 0 %d 2 \"", + (long) w, (long) h, bitspersample, nc, bs); + fprintf(fd, startline, nc); + fprintf(fd, "\"\n"); +} + +/* Convert pixel width and height pw, ph, to points pprw, pprh + * using image resolution and resolution units from TIFF tags. + * pw : image width in pixels + * ph : image height in pixels + * pprw : image width in PS units (72 dpi) + * pprh : image height in PS units (72 dpi) + */ +static void +setupPageState(TIFF* tif, uint32* pw, uint32* ph, double* pprw, double* pprh) +{ + float xres = 0.0F, yres = 0.0F; + + TIFFGetField(tif, TIFFTAG_IMAGEWIDTH, pw); + TIFFGetField(tif, TIFFTAG_IMAGELENGTH, ph); + if (res_unit == 0) /* Not specified as command line option */ + if (!TIFFGetFieldDefaulted(tif, TIFFTAG_RESOLUTIONUNIT, &res_unit)) + res_unit = RESUNIT_INCH; + /* + * Calculate printable area. + */ + if (!TIFFGetField(tif, TIFFTAG_XRESOLUTION, &xres) + || fabs(xres) < 0.0000001) + xres = PS_UNIT_SIZE; + if (!TIFFGetField(tif, TIFFTAG_YRESOLUTION, &yres) + || fabs(yres) < 0.0000001) + yres = PS_UNIT_SIZE; + switch (res_unit) { + case RESUNIT_CENTIMETER: + xres *= 2.54F, yres *= 2.54F; + break; + case RESUNIT_INCH: + break; + case RESUNIT_NONE: /* Subsequent code assumes we have converted to inches! */ + res_unit = RESUNIT_INCH; + break; + default: /* Last ditch guess for unspecified RESUNIT case + * check that the resolution is not inches before scaling it. + * Moved to end of function with additional check, RJN, 08-31-2010 + * if (xres != PS_UNIT_SIZE || yres != PS_UNIT_SIZE) + * xres *= PS_UNIT_SIZE, yres *= PS_UNIT_SIZE; + */ + break; + } + /* This is a hack to deal with images that have no meaningful Resolution Size + * but may have x and/or y resolutions of 1 pixel per undefined unit. + */ + if ((xres > 1.0) && (xres != PS_UNIT_SIZE)) + *pprw = PSUNITS(*pw, xres); + else + *pprw = PSUNITS(*pw, PS_UNIT_SIZE); + if ((yres > 1.0) && (yres != PS_UNIT_SIZE)) + *pprh = PSUNITS(*ph, yres); + else + *pprh = PSUNITS(*ph, PS_UNIT_SIZE); +} + +static int +isCCITTCompression(TIFF* tif) +{ + uint16 compress; + TIFFGetField(tif, TIFFTAG_COMPRESSION, &compress); + return (compress == COMPRESSION_CCITTFAX3 || + compress == COMPRESSION_CCITTFAX4 || + compress == COMPRESSION_CCITTRLE || + compress == COMPRESSION_CCITTRLEW); +} + +static tsize_t tf_bytesperrow; +static tsize_t ps_bytesperrow; +static tsize_t tf_rowsperstrip; +static tsize_t tf_numberstrips; +static char *hex = "0123456789abcdef"; + +/* + * Pagewidth and pageheight are the output size in points, + * may refer to values specified with -h and -w, or to + * values read from the image if neither -h nor -w are used. + * Imagewidth and imageheight are image size in points. + * Ximages and Yimages are number of pages across and down. + * Only one of maxPageHeight or maxPageWidth can be used. + * These are global variables unfortunately. + */ +int get_subimage_count(double pagewidth, double pageheight, + double imagewidth, double imageheight, + int *ximages, int *yimages, + int rotation, double scale) +{ + int pages = 1; + double splitheight = 0; /* Requested Max Height in points */ + double splitwidth = 0; /* Requested Max Width in points */ + double overlap = 0; /* Repeated edge width in points */ + + splitheight = maxPageHeight * PS_UNIT_SIZE; + splitwidth = maxPageWidth * PS_UNIT_SIZE; + overlap = splitOverlap * PS_UNIT_SIZE; + pagewidth *= PS_UNIT_SIZE; + pageheight *= PS_UNIT_SIZE; + + if ((imagewidth < 1.0) || (imageheight < 1.0)) + { + TIFFError("get_subimage_count", "Invalid image width or height"); + return (0); + } + + switch (rotation) + { + case 0: + case 180: if (splitheight > 0) /* -H maxPageHeight */ + { + if (imageheight > splitheight) /* More than one vertical image segment */ + { + if (pagewidth) + *ximages = (int)ceil((scale * imagewidth) / (pagewidth - overlap)); + else + *ximages = 1; + *yimages = (int)ceil((scale * imageheight) / (splitheight - overlap)); /* Max vert pages needed */ + } + else + { + if (pagewidth) + *ximages = (int)ceil((scale * imagewidth) / (pagewidth - overlap)); /* Max horz pages needed */ + else + *ximages = 1; + *yimages = 1; /* Max vert pages needed */ + } + } + else + { + if (splitwidth > 0) /* -W maxPageWidth */ + { + if (imagewidth >splitwidth) + { + *ximages = (int)ceil((scale * imagewidth) / (splitwidth - overlap)); /* Max horz pages needed */ + if (pageheight) + *yimages = (int)ceil((scale * imageheight) / (pageheight - overlap)); /* Max vert pages needed */ + else + *yimages = 1; + } + else + { + *ximages = 1; /* Max vert pages needed */ + if (pageheight) + *yimages = (int)ceil((scale * imageheight) / (pageheight - overlap)); /* Max vert pages needed */ + else + *yimages = 1; + } + } + else + { + *ximages = 1; + *yimages = 1; + } + } + break; + case 90: + case 270: if (splitheight > 0) /* -H maxPageHeight */ + { + if (imagewidth > splitheight) /* More than one vertical image segment */ + { + *yimages = (int)ceil((scale * imagewidth) / (splitheight - overlap)); /* Max vert pages needed */ + if (pagewidth) + *ximages = (int)ceil((scale * imageheight) / (pagewidth - overlap)); /* Max horz pages needed */ + else + *ximages = 1; + } + else + { + *yimages = 1; /* Max vert pages needed */ + if (pagewidth) + *ximages = (int)ceil((scale * imageheight) / (pagewidth - overlap)); /* Max horz pages needed */ + else + *ximages = 1; + } + } + else + { + if (splitwidth > 0) /* -W maxPageWidth */ + { + if (imageheight > splitwidth) + { + if (pageheight) + *yimages = (int)ceil((scale * imagewidth) / (pageheight - overlap)); /* Max vert pages needed */ + else + *yimages = 1; + *ximages = (int)ceil((scale * imageheight) / (splitwidth - overlap)); /* Max horz pages needed */ + } + else + { + if (pageheight) + *yimages = (int)ceil((scale * imagewidth) / (pageheight - overlap)); /* Max horz pages needed */ + else + *yimages = 1; + *ximages = 1; /* Max vert pages needed */ + } + } + else + { + *ximages = 1; + *yimages = 1; + } + } + break; + default: *ximages = 1; + *yimages = 1; + } + pages = (*ximages) * (*yimages); + return (pages); + } + +/* New version of PlaceImage that handles only the translation and rotation + * for a single output page. + */ +int exportMaskedImage(FILE *fp, double pagewidth, double pageheight, + double imagewidth, double imageheight, + int row, int column, + double left_offset, double bott_offset, + double scale, int center, int rotation) + { + double xtran = 0.0; + double ytran = 0.0; + + double xscale = 1.0; + double yscale = 1.0; + + double splitheight = 0; /* Requested Max Height in points */ + double splitwidth = 0; /* Requested Max Width in points */ + double overlap = 0; /* Repeated edge width in points */ + double subimage_height = 0.0; + + splitheight = maxPageHeight * PS_UNIT_SIZE; + splitwidth = maxPageWidth * PS_UNIT_SIZE; + overlap = splitOverlap * PS_UNIT_SIZE; + xscale = scale * imagewidth; + yscale = scale * imageheight; + + if ((xscale < 0.0) || (yscale < 0.0)) + { + TIFFError("exportMaskedImage", "Invalid parameters."); + return (-1); + } + + /* If images are cropped to a vewport with -H or -W, the output pages are shifted to + * the top of each output page rather than the Postscript default lower edge. + */ + switch (rotation) + { + case 0: + case 180: if (splitheight > 0) /* -H maxPageHeight */ + { + if (splitheight < imageheight) /* More than one vertical image segments */ + { + xtran = -1.0 * column * (pagewidth - overlap); + subimage_height = imageheight - ((splitheight - overlap) * row); + ytran = pageheight - subimage_height * (pageheight / splitheight); + } + else /* Only one page in vertical direction */ + { + xtran = -1.0 * column * (pagewidth - overlap); + ytran = splitheight - imageheight; + } + } + else + { + if (splitwidth > 0) /* maxPageWidth */ + { + if (splitwidth < imagewidth) + { + xtran = -1.0 * column * splitwidth; + ytran = -1.0 * row * (pageheight - overlap); + } + else /* Only one page in horizontal direction */ + { + ytran = -1.0 * row * (pageheight - overlap); + xtran = 0; + } + } + else /* Simple case, no splitting */ + { + ytran = pageheight - imageheight; + xtran = 0; + } + } + bott_offset += ytran / (center ? 2 : 1); + left_offset += xtran / (center ? 2 : 1); + break; + case 90: + case 270: if (splitheight > 0) /* -H maxPageHeight */ + { + if (splitheight < imagewidth) /* More than one vertical image segments */ + { + xtran = -1.0 * column * (pageheight - overlap); + /* Commented code places image at bottom of page instead of top. + ytran = -1.0 * row * splitheight; + */ + if (row == 0) + ytran = -1.0 * (imagewidth - splitheight); + else + ytran = -1.0 * (imagewidth - (splitheight - overlap) * (row + 1)); + } + else /* Only one page in vertical direction */ + { + xtran = -1.0 * column * (pageheight - overlap); + ytran = splitheight - imagewidth; + } + } + else + { + if (splitwidth > 0) /* maxPageWidth */ + { + if (splitwidth < imageheight) + { + xtran = -1.0 * column * splitwidth; + ytran = -1.0 * row * (pagewidth - overlap); + } + else /* Only one page in horizontal direction */ + { + ytran = -1.0 * row * (pagewidth - overlap); + xtran = 0; + } + } + else /* Simple case, no splitting */ + { + ytran = pageheight - imageheight; + xtran = 0; /* pagewidth - imagewidth; */ + } + } + bott_offset += ytran / (center ? 2 : 1); + left_offset += xtran / (center ? 2 : 1); + break; + default: xtran = 0; + ytran = 0; + } + + switch (rotation) + { + case 0: fprintf(fp, "%f %f translate\n", left_offset, bott_offset); + fprintf(fp, "%f %f scale\n", xscale, yscale); + break; + case 180: fprintf(fp, "%f %f translate\n", left_offset, bott_offset); + fprintf(fp, "%f %f scale\n1 1 translate 180 rotate\n", xscale, yscale); + break; + case 90: fprintf(fp, "%f %f translate\n", left_offset, bott_offset); + fprintf(fp, "%f %f scale\n1 0 translate 90 rotate\n", yscale, xscale); + break; + case 270: fprintf(fp, "%f %f translate\n", left_offset, bott_offset); + fprintf(fp, "%f %f scale\n0 1 translate 270 rotate\n", yscale, xscale); + break; + default: TIFFError ("exportMaskedImage", "Unsupported rotation angle %d. No rotation", rotation); + fprintf( fp, "%f %f scale\n", xscale, yscale); + break; + } + + return (0); + } + +/* Rotate an image without scaling or clipping */ +int psRotateImage (FILE * fd, int rotation, double pswidth, double psheight, + double left_offset, double bottom_offset) + { + if ((left_offset != 0.0) || (bottom_offset != 0)) + fprintf (fd, "%f %f translate\n", left_offset, bottom_offset); + + /* Exchange width and height for 90/270 rotations */ + switch (rotation) + { + case 0: fprintf (fd, "%f %f scale\n", pswidth, psheight); + break; + case 90: fprintf (fd, "%f %f scale\n1 0 translate 90 rotate\n", psheight, pswidth); + break; + case 180: fprintf (fd, "%f %f scale\n1 1 translate 180 rotate\n", pswidth, psheight); + break; + case 270: fprintf (fd, "%f %f scale\n0 1 translate 270 rotate\n", psheight, pswidth); + break; + default: TIFFError ("psRotateImage", "Unsupported rotation %d.", rotation); + fprintf( fd, "%f %f scale\n", pswidth, psheight); + return (1); + } + return (0); + } + +/* Scale and rotate an image to a single output page. */ +int psScaleImage(FILE * fd, double scale, int rotation, int center, + double reqwidth, double reqheight, double pswidth, double psheight, + double left_offset, double bottom_offset) + { + double hcenter = 0.0, vcenter = 0.0; + + /* Adjust offsets for centering */ + if (center) + { + switch (rotation) + { + case 90: vcenter = (reqheight - pswidth * scale) / 2; + hcenter = (reqwidth - psheight * scale) / 2; + fprintf (fd, "%f %f translate\n", hcenter, vcenter); + fprintf (fd, "%f %f scale\n1 0 translate 90 rotate\n", psheight * scale, pswidth * scale); + break; + case 180: hcenter = (reqwidth - pswidth * scale) / 2; + vcenter = (reqheight - psheight * scale) / 2; + fprintf (fd, "%f %f translate\n", hcenter, vcenter); + fprintf (fd, "%f %f scale\n1 1 translate 180 rotate\n", pswidth * scale, psheight * scale); + break; + case 270: vcenter = (reqheight - pswidth * scale) / 2; + hcenter = (reqwidth - psheight * scale) / 2; + fprintf (fd, "%f %f translate\n", hcenter, vcenter); + fprintf (fd, "%f %f scale\n0 1 translate 270 rotate\n", psheight * scale, pswidth * scale); + break; + case 0: + default: hcenter = (reqwidth - pswidth * scale) / 2; + vcenter = (reqheight - psheight * scale) / 2; + fprintf (fd, "%f %f translate\n", hcenter, vcenter); + fprintf (fd, "%f %f scale\n", pswidth * scale, psheight * scale); + break; + } + } + else /* Not centered */ + { + switch (rotation) + { + case 0: fprintf (fd, "%f %f translate\n", left_offset ? left_offset : 0.0, + bottom_offset ? bottom_offset : reqheight - (psheight * scale)); + fprintf (fd, "%f %f scale\n", pswidth * scale, psheight * scale); + break; + case 90: fprintf (fd, "%f %f translate\n", left_offset ? left_offset : 0.0, + bottom_offset ? bottom_offset : reqheight - (pswidth * scale)); + fprintf (fd, "%f %f scale\n1 0 translate 90 rotate\n", psheight * scale, pswidth * scale); + break; + case 180: fprintf (fd, "%f %f translate\n", left_offset ? left_offset : 0.0, + bottom_offset ? bottom_offset : reqheight - (psheight * scale)); + fprintf (fd, "%f %f scale\n1 1 translate 180 rotate\n", pswidth * scale, psheight * scale); + break; + case 270: fprintf (fd, "%f %f translate\n", left_offset ? left_offset : 0.0, + bottom_offset ? bottom_offset : reqheight - (pswidth * scale)); + fprintf (fd, "%f %f scale\n0 1 translate 270 rotate\n", psheight * scale, pswidth * scale); + break; + default: TIFFError ("psScaleImage", "Unsupported rotation %d", rotation); + fprintf (fd, "%f %f scale\n", pswidth * scale, psheight * scale); + return (1); + } + } + + return (0); + } + +/* This controls the visible portion of the page which is displayed. + * N.B. Setting maxPageHeight no longer sets pageheight if not set explicitly + */ +int psPageSize (FILE * fd, int rotation, double pgwidth, double pgheight, + double reqwidth, double reqheight, double pswidth, double psheight) + { + double xscale = 1.0, yscale = 1.0, scale = 1.0; + double splitheight; + double splitwidth; + double new_width; + double new_height; + + splitheight = maxPageHeight * PS_UNIT_SIZE; + splitwidth = maxPageWidth * PS_UNIT_SIZE; + + switch (rotation) + { + case 0: + case 180: if ((splitheight > 0) || (splitwidth > 0)) + { + if (pgwidth != 0 || pgheight != 0) + { + xscale = reqwidth / (splitwidth ? splitwidth : pswidth); + yscale = reqheight / (splitheight ? splitheight : psheight); + scale = (xscale < yscale) ? xscale : yscale; + } + new_width = splitwidth ? splitwidth : scale * pswidth; + new_height = splitheight ? splitheight : scale * psheight; + if (strlen(pageOrientation)) + fprintf (fd, "%%%%PageOrientation: %s\n", pageOrientation); + else + fprintf (fd, "%%%%PageOrientation: %s\n", (new_width > new_height) ? "Landscape" : "Portrait"); + fprintf (fd, "%%%%PageBoundingBox: 0 0 %ld %ld\n", (long)new_width, (long)new_height); + fprintf (fd, "1 dict begin /PageSize [ %f %f ] def currentdict end setpagedevice\n", + new_width, new_height); + } + else /* No viewport defined with -H or -W */ + { + if ((pgwidth == 0) && (pgheight == 0)) /* Image not scaled */ + { + if (strlen(pageOrientation)) + fprintf (fd, "%%%%PageOrientation: %s\n", pageOrientation); + else + fprintf (fd, "%%%%PageOrientation: %s\n", (pswidth > psheight) ? "Landscape" : "Portrait"); + fprintf (fd, "%%%%PageBoundingBox: 0 0 %ld %ld\n", (long)pswidth, (long)psheight); + fprintf(fd, "1 dict begin /PageSize [ %f %f ] def currentdict end setpagedevice\n", + pswidth, psheight); + } + else /* Image scaled */ + { + if (strlen(pageOrientation)) + fprintf (fd, "%%%%PageOrientation: %s\n", pageOrientation); + else + fprintf (fd, "%%%%PageOrientation: %s\n", (reqwidth > reqheight) ? "Landscape" : "Portrait"); + fprintf (fd, "%%%%PageBoundingBox: 0 0 %ld %ld\n", (long)reqwidth, (long)reqheight); + fprintf(fd, "1 dict begin /PageSize [ %f %f ] def currentdict end setpagedevice\n", + reqwidth, reqheight); + } + } + break; + case 90: + case 270: if ((splitheight > 0) || (splitwidth > 0)) + { + if (pgwidth != 0 || pgheight != 0) + { + xscale = reqwidth / (splitwidth ? splitwidth : pswidth); + yscale = reqheight / (splitheight ? splitheight : psheight); + scale = (xscale < yscale) ? xscale : yscale; + } + new_width = splitwidth ? splitwidth : scale * psheight; + new_height = splitheight ? splitheight : scale * pswidth; + + if (strlen(pageOrientation)) + fprintf (fd, "%%%%PageOrientation: %s\n", pageOrientation); + else + fprintf (fd, "%%%%PageOrientation: %s\n", (new_width > new_height) ? "Landscape" : "Portrait"); + fprintf (fd, "%%%%PageBoundingBox: 0 0 %ld %ld\n", (long)new_width, (long)new_height); + fprintf (fd, "1 dict begin /PageSize [ %f %f ] def currentdict end setpagedevice\n", + new_width, new_height); + } + else + { + if ((pgwidth == 0) && (pgheight == 0)) /* Image not scaled */ + { + if (strlen(pageOrientation)) + fprintf (fd, "%%%%PageOrientation: %s\n", pageOrientation); + else + fprintf (fd, "%%%%PageOrientation: %s\n", (psheight > pswidth) ? "Landscape" : "Portrait"); + fprintf (fd, "%%%%PageBoundingBox: 0 0 %ld %ld\n", (long)psheight, (long)pswidth); + fprintf(fd, "1 dict begin /PageSize [ %f %f ] def currentdict end setpagedevice\n", + psheight, pswidth); + } + else /* Image scaled */ + { + if (strlen(pageOrientation)) + fprintf (fd, "%%%%PageOrientation: %s\n", pageOrientation); + else + fprintf (fd, "%%%%PageOrientation: %s\n", (reqwidth > reqheight) ? "Landscape" : "Portrait"); + fprintf (fd, "%%%%PageBoundingBox: 0 0 %ld %ld\n", (long)reqwidth, (long)reqheight); + fprintf(fd, "1 dict begin /PageSize [ %f %f ] def currentdict end setpagedevice\n", + reqwidth, reqheight); + } + } + break; + default: TIFFError ("psPageSize", "Invalid rotation %d", rotation); + return (1); + } + fputs("<<\n /Policies <<\n /PageSize 3\n >>\n>> setpagedevice\n", fd); + + return (0); + } /* end psPageSize */ + +/* Mask an image as a series of pages, each only showing a section defined + * by the maxPageHeight or maxPageWidth options. + */ +int psMaskImage(FILE *fd, TIFF *tif, int rotation, int center, + int *npages, double pixwidth, double pixheight, + double left_margin, double bottom_margin, + double pgwidth, double pgheight, + double pswidth, double psheight, double scale) + { + int i, j; + int ximages = 1, yimages = 1; + int pages = *npages; + double view_width = 0; + double view_height = 0; + + if (get_viewport (pgwidth, pgheight, pswidth, psheight, &view_width, &view_height, rotation)) + { + TIFFError ("get_viewport", "Unable to set image viewport"); + return (-1); + } + + if (get_subimage_count(pgwidth, pgheight, pswidth, psheight, + &ximages, &yimages, rotation, scale) < 1) + { + TIFFError("get_subimage_count", "Invalid image count: %d columns, %d rows", ximages, yimages); + return (-1); + } + + for (i = 0; i < yimages; i++) + { + for (j = 0; j < ximages; j++) + { + pages++; + *npages = pages; + fprintf(fd, "%%%%Page: %d %d\n", pages, pages); + + /* Write out the PageSize info for non EPS files */ + if (!generateEPSF && ( level2 || level3 )) + { + if (psPageSize(fd, rotation, pgwidth, pgheight, + view_width, view_height, pswidth, psheight)) + return (-1); + } + fprintf(fd, "gsave\n"); + fprintf(fd, "100 dict begin\n"); + if (exportMaskedImage(fd, view_width, view_height, pswidth, psheight, + i, j, left_margin, bottom_margin, + scale, center, rotation)) + { + TIFFError("exportMaskedImage", "Invalid image parameters."); + return (-1); + } + PSpage(fd, tif, pixwidth, pixheight); + fprintf(fd, "end\n"); + fprintf(fd, "grestore\n"); + fprintf(fd, "showpage\n"); + } + } + + return (pages); + } + +/* Compute scale factor and write out file header */ +int psStart(FILE *fd, int npages, int auto_rotate, int *rotation, double *scale, + double ox, double oy, double pgwidth, double pgheight, + double reqwidth, double reqheight, double pswidth, double psheight, + double left_offset, double bottom_offset) + { + double maxsource = 0.0; /* Used for auto rotations */ + double maxtarget = 0.0; + double xscale = 1.0, yscale = 1.0; + double splitheight; + double splitwidth; + double view_width = 0.0, view_height = 0.0; + double page_width = 0.0, page_height = 0.0; + + /* Splitheight and splitwidth are in inches */ + splitheight = maxPageHeight * PS_UNIT_SIZE; + splitwidth = maxPageWidth * PS_UNIT_SIZE; + + page_width = pgwidth * PS_UNIT_SIZE; + page_height = pgheight * PS_UNIT_SIZE; + + /* If user has specified a page width and height and requested the + * image to be auto-rotated to fit on that media, we match the + * longest dimension of the image to the longest dimension of the + * target media but we have to ignore auto rotate if user specified + * maxPageHeight since this makes life way too complicated. */ + if (auto_rotate) + { + if ((splitheight != 0) || (splitwidth != 0)) + { + TIFFError ("psStart", "Auto-rotate is incompatible with page splitting "); + return (1); + } + + /* Find longest edges in image and output media */ + maxsource = (pswidth >= psheight) ? pswidth : psheight; + maxtarget = (reqwidth >= reqheight) ? reqwidth : reqheight; + + if (((maxsource == pswidth) && (maxtarget != reqwidth)) || + ((maxsource == psheight) && (maxtarget != reqheight))) + { /* optimal orientaion does not match input orientation */ + *rotation = 90; + xscale = (reqwidth - left_offset)/psheight; + yscale = (reqheight - bottom_offset)/pswidth; + } + else /* optimal orientaion matches input orientation */ + { + xscale = (reqwidth - left_offset)/pswidth; + yscale = (reqheight - bottom_offset)/psheight; + } + *scale = (xscale < yscale) ? xscale : yscale; + + /* Do not scale image beyound original size */ + if (*scale > 1.0) + *scale = 1.0; + + /* Set the size of the displayed image to requested page size + * and optimal orientation. + */ + if (!npages) + PSHead(fd, reqwidth, reqheight, ox, oy); + + return (0); + } + + /* N.B. If pgwidth or pgheight are set from maxPageHeight/Width, + * we have a problem with the tests below under splitheight. + */ + + switch (*rotation) /* Auto rotate has NOT been specified */ + { + case 0: + case 180: if ((splitheight != 0) || (splitwidth != 0)) + { /* Viewport clipped to maxPageHeight or maxPageWidth */ + if ((page_width != 0) || (page_height != 0)) /* Image scaled */ + { + xscale = (reqwidth - left_offset) / (page_width ? page_width : pswidth); + yscale = (reqheight - bottom_offset) / (page_height ? page_height : psheight); + *scale = (xscale < yscale) ? xscale : yscale; + /* + if (*scale > 1.0) + *scale = 1.0; + */ + } + else /* Image clipped but not scaled */ + *scale = 1.0; + + view_width = splitwidth ? splitwidth : *scale * pswidth; + view_height = splitheight ? splitheight: *scale * psheight; + } + else /* Viewport not clipped to maxPageHeight or maxPageWidth */ + { + if ((page_width != 0) || (page_height != 0)) + { /* Image scaled */ + xscale = (reqwidth - left_offset) / pswidth; + yscale = (reqheight - bottom_offset) / psheight; + + view_width = reqwidth; + view_height = reqheight; + } + else + { /* Image not scaled */ + xscale = (pswidth - left_offset)/pswidth; + yscale = (psheight - bottom_offset)/psheight; + + view_width = pswidth; + view_height = psheight; + } + } + break; + case 90: + case 270: if ((splitheight != 0) || (splitwidth != 0)) + { /* Viewport clipped to maxPageHeight or maxPageWidth */ + if ((page_width != 0) || (page_height != 0)) /* Image scaled */ + { + xscale = (reqwidth - left_offset)/ psheight; + yscale = (reqheight - bottom_offset)/ pswidth; + *scale = (xscale < yscale) ? xscale : yscale; + /* + if (*scale > 1.0) + *scale = 1.0; + */ + } + else /* Image clipped but not scaled */ + *scale = 1.0; + view_width = splitwidth ? splitwidth : *scale * psheight; + view_height = splitheight ? splitheight : *scale * pswidth; + } + else /* Viewport not clipped to maxPageHeight or maxPageWidth */ + { + if ((page_width != 0) || (page_height != 0)) /* Image scaled */ + { + xscale = (reqwidth - left_offset) / psheight; + yscale = (reqheight - bottom_offset) / pswidth; + + view_width = reqwidth; + view_height = reqheight; + } + else + { + xscale = (pswidth - left_offset)/ psheight; + yscale = (psheight - bottom_offset)/ pswidth; + + view_width = psheight; + view_height = pswidth; + } + } + break; + default: TIFFError ("psPageSize", "Invalid rotation %d", *rotation); + return (1); + } + + if (!npages) + PSHead(fd, (page_width ? page_width : view_width), (page_height ? page_height : view_height), ox, oy); + + *scale = (xscale < yscale) ? xscale : yscale; + if (*scale > 1.0) + *scale = 1.0; + + return (0); + } + +int get_viewport (double pgwidth, double pgheight, double pswidth, double psheight, + double *view_width, double *view_height, int rotation) + { + /* Only one of maxPageHeight or maxPageWidth can be specified */ + if (maxPageHeight != 0) /* Clip the viewport to maxPageHeight on each page */ + { + *view_height = maxPageHeight * PS_UNIT_SIZE; + /* + * if (res_unit == RESUNIT_CENTIMETER) + * *view_height /= 2.54F; + */ + } + else + { + if (pgheight != 0) /* User has set PageHeight with -h flag */ + { + *view_height = pgheight * PS_UNIT_SIZE; /* Postscript size for Page Height in inches */ + /* if (res_unit == RESUNIT_CENTIMETER) + * *view_height /= 2.54F; + */ + } + else /* If no width or height are specified, use the original size from image */ + switch (rotation) + { + default: + case 0: + case 180: *view_height = psheight; + break; + case 90: + case 270: *view_height = pswidth; + break; + } + } + + if (maxPageWidth != 0) /* Clip the viewport to maxPageWidth on each page */ + { + *view_width = maxPageWidth * PS_UNIT_SIZE; + /* if (res_unit == RESUNIT_CENTIMETER) + * *view_width /= 2.54F; + */ + } + else + { + if (pgwidth != 0) /* User has set PageWidth with -w flag */ + { + *view_width = pgwidth * PS_UNIT_SIZE; /* Postscript size for Page Width in inches */ + /* if (res_unit == RESUNIT_CENTIMETER) + * *view_width /= 2.54F; + */ + } + else /* If no width or height are specified, use the original size from image */ + switch (rotation) + { + default: + case 0: + case 180: *view_width = pswidth; + break; + case 90: + case 270: *view_width = psheight; /* (*view_height / psheight) * psheight; */ + break; + } + } + + return (0); + } + +/* pgwidth and pgheight specify page width and height in inches from -h and -w flags + * lm and bm are the LeftMargin and BottomMargin in inches + * center causes the image to be centered on the page if the paper size is + * larger than the image size + * returns the sequence number of the page processed or -1 on error + */ + +int TIFF2PS(FILE* fd, TIFF* tif, double pgwidth, double pgheight, double lm, double bm, int center) + { + uint32 pixwidth = 0, pixheight = 0; /* Image width and height in pixels */ + double ox = 0.0, oy = 0.0; /* Offset from current Postscript origin */ + double pswidth, psheight; /* Original raw image width and height in points */ + double view_width, view_height; /* Viewport width and height in points */ + double scale = 1.0; + double left_offset = lm * PS_UNIT_SIZE; + double bottom_offset = bm * PS_UNIT_SIZE; + uint32 subfiletype; + uint16* sampleinfo; + static int npages = 0; + + if (!TIFFGetField(tif, TIFFTAG_XPOSITION, &ox)) + ox = 0; + if (!TIFFGetField(tif, TIFFTAG_YPOSITION, &oy)) + oy = 0; + + /* Consolidated all the tag information into one code segment, Richard Nolde */ + do { + tf_numberstrips = TIFFNumberOfStrips(tif); + TIFFGetFieldDefaulted(tif, TIFFTAG_ROWSPERSTRIP, &tf_rowsperstrip); + TIFFGetFieldDefaulted(tif, TIFFTAG_BITSPERSAMPLE, &bitspersample); + TIFFGetFieldDefaulted(tif, TIFFTAG_SAMPLESPERPIXEL, &samplesperpixel); + TIFFGetFieldDefaulted(tif, TIFFTAG_PLANARCONFIG, &planarconfiguration); + TIFFGetField(tif, TIFFTAG_COMPRESSION, &compression); + TIFFGetFieldDefaulted(tif, TIFFTAG_EXTRASAMPLES, &extrasamples, &sampleinfo); + alpha = (extrasamples == 1 && sampleinfo[0] == EXTRASAMPLE_ASSOCALPHA); + if (!TIFFGetField(tif, TIFFTAG_PHOTOMETRIC, &photometric)) + { + switch (samplesperpixel - extrasamples) + { + case 1: if (isCCITTCompression(tif)) + photometric = PHOTOMETRIC_MINISWHITE; + else + photometric = PHOTOMETRIC_MINISBLACK; + break; + case 3: photometric = PHOTOMETRIC_RGB; + break; + case 4: photometric = PHOTOMETRIC_SEPARATED; + break; + } + } + + /* Read image tags for width and height in pixels pixwidth, pixheight, + * and convert to points pswidth, psheight + */ + setupPageState(tif, &pixwidth, &pixheight, &pswidth, &psheight); + view_width = pswidth; + view_height = psheight; + + if (get_viewport (pgwidth, pgheight, pswidth, psheight, &view_width, &view_height, rotation)) + { + TIFFError("get_viewport", "Unable to set image viewport"); + return (1); + } + + /* Write the Postscript file header with Bounding Box and Page Size definitions */ + if (psStart(fd, npages, auto_rotate, &rotation, &scale, ox, oy, + pgwidth, pgheight, view_width, view_height, pswidth, psheight, + left_offset, bottom_offset)) + return (-1); + + if (checkImage(tif)) /* Aborts if unsupported image parameters */ + { + tf_bytesperrow = TIFFScanlineSize(tif); + + /* Set viewport clipping and scaling options */ + if ((maxPageHeight) || (maxPageWidth) || (pgwidth != 0) || (pgheight != 0)) + { + if ((maxPageHeight) || (maxPageWidth)) /* used -H or -W option */ + { + if (psMaskImage(fd, tif, rotation, center, &npages, pixwidth, pixheight, + left_offset, bottom_offset, pgwidth, pgheight, + pswidth, psheight, scale) < 0) + return (-1); + } + else /* N.B. Setting maxPageHeight no longer sets pgheight */ + { + if (pgwidth != 0 || pgheight != 0) + { + /* User did not specify a maxium page height or width using -H or -W flag + * but did use -h or -w flag to scale to a specific size page. + */ + npages++; + fprintf(fd, "%%%%Page: %d %d\n", npages, npages); + + if (!generateEPSF && ( level2 || level3 )) + { + /* Write out the PageSize info for non EPS files */ + if (psPageSize(fd, rotation, pgwidth, pgheight, + view_width, view_height, pswidth, psheight)) + return (-1); + } + fprintf(fd, "gsave\n"); + fprintf(fd, "100 dict begin\n"); + if (psScaleImage(fd, scale, rotation, center, view_width, view_height, + pswidth, psheight, left_offset, bottom_offset)) + return (-1); + + PSpage(fd, tif, pixwidth, pixheight); + fprintf(fd, "end\n"); + fprintf(fd, "grestore\n"); + fprintf(fd, "showpage\n"); + } + } + } + else /* Simple rotation: user did not use -H, -W, -h or -w */ + { + npages++; + fprintf(fd, "%%%%Page: %d %d\n", npages, npages); + + if (!generateEPSF && ( level2 || level3 )) + { + /* Write out the PageSize info for non EPS files */ + if (psPageSize(fd, rotation, pgwidth, pgheight, + view_width, view_height, pswidth, psheight)) + return (-1); + } + fprintf(fd, "gsave\n"); + fprintf(fd, "100 dict begin\n"); + if (psRotateImage(fd, rotation, pswidth, psheight, left_offset, bottom_offset)) + return (-1); + + PSpage(fd, tif, pixwidth, pixheight); + fprintf(fd, "end\n"); + fprintf(fd, "grestore\n"); + fprintf(fd, "showpage\n"); + } + } + if (generateEPSF) + break; + TIFFGetFieldDefaulted(tif, TIFFTAG_SUBFILETYPE, &subfiletype); + } while (((subfiletype & FILETYPE_PAGE) || printAll) && TIFFReadDirectory(tif)); + +return(npages); +} + +static char DuplexPreamble[] = "\ +%%BeginFeature: *Duplex True\n\ +systemdict begin\n\ + /languagelevel where { pop languagelevel } { 1 } ifelse\n\ + 2 ge { 1 dict dup /Duplex true put setpagedevice }\n\ + { statusdict /setduplex known { statusdict begin setduplex true end } if\n\ + } ifelse\n\ +end\n\ +%%EndFeature\n\ +"; + +static char TumblePreamble[] = "\ +%%BeginFeature: *Tumble True\n\ +systemdict begin\n\ + /languagelevel where { pop languagelevel } { 1 } ifelse\n\ + 2 ge { 1 dict dup /Tumble true put setpagedevice }\n\ + { statusdict /settumble known { statusdict begin true settumble end } if\n\ + } ifelse\n\ +end\n\ +%%EndFeature\n\ +"; + +static char AvoidDeadZonePreamble[] = "\ +gsave newpath clippath pathbbox grestore\n\ + 4 2 roll 2 copy translate\n\ + exch 3 1 roll sub 3 1 roll sub exch\n\ + currentpagedevice /PageSize get aload pop\n\ + exch 3 1 roll div 3 1 roll div abs exch abs\n\ + 2 copy gt { exch } if pop\n\ + dup 1 lt { dup scale } { pop } ifelse\n\ +"; + +void +PSHead(FILE *fd, double pagewidth, double pageheight, double xoff, double yoff) +{ + time_t t; + + t = time(0); + fprintf(fd, "%%!PS-Adobe-3.0%s\n", generateEPSF ? " EPSF-3.0" : ""); + fprintf(fd, "%%%%Creator: %s\n", creator ? creator : "tiff2ps"); + fprintf(fd, "%%%%Title: %s\n", title ? title : filename); + fprintf(fd, "%%%%CreationDate: %s", ctime(&t)); + fprintf(fd, "%%%%DocumentData: Clean7Bit\n"); + /* NB: should use PageBoundingBox for each page instead of BoundingBox * + * PageBoundingBox DSC added in PSPageSize function, R Nolde 09-01-2010 + */ + fprintf(fd, "%%%%Origin: %ld %ld\n", (long) xoff, (long) yoff); + fprintf(fd, "%%%%BoundingBox: 0 0 %ld %ld\n", + (long) ceil(pagewidth), (long) ceil(pageheight)); + + fprintf(fd, "%%%%LanguageLevel: %d\n", (level3 ? 3 : (level2 ? 2 : 1))); + if (generateEPSF == TRUE) + fprintf(fd, "%%%%Pages: 1 1\n"); + else + fprintf(fd, "%%%%Pages: (atend)\n"); + fprintf(fd, "%%%%EndComments\n"); + if (generateEPSF == FALSE) + { + fprintf(fd, "%%%%BeginSetup\n"); + if (PSduplex) + fprintf(fd, "%s", DuplexPreamble); + if (PStumble) + fprintf(fd, "%s", TumblePreamble); + if (PSavoiddeadzone && (level2 || level3)) + fprintf(fd, "%s", AvoidDeadZonePreamble); + fprintf(fd, "%%%%EndSetup\n"); + } +} + +void +PSTail(FILE *fd, int npages) +{ + fprintf(fd, "%%%%Trailer\n"); + if (generateEPSF == FALSE) + fprintf(fd, "%%%%Pages: %d\n", npages); + fprintf(fd, "%%%%EOF\n"); +} + +static int +checkcmap(TIFF* tif, int n, uint16* r, uint16* g, uint16* b) +{ + (void) tif; + while (n-- > 0) + if (*r++ >= 256 || *g++ >= 256 || *b++ >= 256) + return (16); + TIFFWarning(filename, "Assuming 8-bit colormap"); + return (8); +} + +static void +PS_Lvl2colorspace(FILE* fd, TIFF* tif) +{ + uint16 *rmap, *gmap, *bmap; + int i, num_colors; + const char * colorspace_p; + + switch ( photometric ) + { + case PHOTOMETRIC_SEPARATED: + colorspace_p = "CMYK"; + break; + + case PHOTOMETRIC_RGB: + colorspace_p = "RGB"; + break; + + default: + colorspace_p = "Gray"; + } + + /* + * Set up PostScript Level 2 colorspace according to + * section 4.8 in the PostScript refenence manual. + */ + fputs("% PostScript Level 2 only.\n", fd); + if (photometric != PHOTOMETRIC_PALETTE) { + if (photometric == PHOTOMETRIC_YCBCR) { + /* MORE CODE HERE */ + } + fprintf(fd, "/Device%s setcolorspace\n", colorspace_p ); + return; + } + + /* + * Set up an indexed/palette colorspace + */ + num_colors = (1 << bitspersample); + if (!TIFFGetField(tif, TIFFTAG_COLORMAP, &rmap, &gmap, &bmap)) { + TIFFError(filename, + "Palette image w/o \"Colormap\" tag"); + return; + } + if (checkcmap(tif, num_colors, rmap, gmap, bmap) == 16) { + /* + * Convert colormap to 8-bits values. + */ +#define CVT(x) (((x) * 255) / ((1L<<16)-1)) + for (i = 0; i < num_colors; i++) { + rmap[i] = CVT(rmap[i]); + gmap[i] = CVT(gmap[i]); + bmap[i] = CVT(bmap[i]); + } +#undef CVT + } + fprintf(fd, "[ /Indexed /DeviceRGB %d", num_colors - 1); + if (ascii85) { + Ascii85Init(); + fputs("\n<~", fd); + ascii85breaklen -= 2; + } else + fputs(" <", fd); + for (i = 0; i < num_colors; i++) { + if (ascii85) { + Ascii85Put((unsigned char)rmap[i], fd); + Ascii85Put((unsigned char)gmap[i], fd); + Ascii85Put((unsigned char)bmap[i], fd); + } else { + fputs((i % 8) ? " " : "\n ", fd); + fprintf(fd, "%02x%02x%02x", + rmap[i], gmap[i], bmap[i]); + } + } + if (ascii85) + Ascii85Flush(fd); + else + fputs(">\n", fd); + fputs("] setcolorspace\n", fd); +} + +static int +PS_Lvl2ImageDict(FILE* fd, TIFF* tif, uint32 w, uint32 h) +{ + int use_rawdata; + uint32 tile_width, tile_height; + uint16 predictor, minsamplevalue, maxsamplevalue; + int repeat_count; + char im_h[64], im_x[64], im_y[64]; + char * imageOp = "image"; + + if ( useImagemask && (bitspersample == 1) ) + imageOp = "imagemask"; + + (void)strcpy(im_x, "0"); + (void)sprintf(im_y, "%lu", (long) h); + (void)sprintf(im_h, "%lu", (long) h); + tile_width = w; + tile_height = h; + if (TIFFIsTiled(tif)) { + repeat_count = TIFFNumberOfTiles(tif); + TIFFGetField(tif, TIFFTAG_TILEWIDTH, &tile_width); + TIFFGetField(tif, TIFFTAG_TILELENGTH, &tile_height); + if (tile_width > w || tile_height > h || + (w % tile_width) != 0 || (h % tile_height != 0)) { + /* + * The tiles does not fit image width and height. + * Set up a clip rectangle for the image unit square. + */ + fputs("0 0 1 1 rectclip\n", fd); + } + if (tile_width < w) { + fputs("/im_x 0 def\n", fd); + (void)strcpy(im_x, "im_x neg"); + } + if (tile_height < h) { + fputs("/im_y 0 def\n", fd); + (void)sprintf(im_y, "%lu im_y sub", (unsigned long) h); + } + } else { + repeat_count = tf_numberstrips; + tile_height = tf_rowsperstrip; + if (tile_height > h) + tile_height = h; + if (repeat_count > 1) { + fputs("/im_y 0 def\n", fd); + fprintf(fd, "/im_h %lu def\n", + (unsigned long) tile_height); + (void)strcpy(im_h, "im_h"); + (void)sprintf(im_y, "%lu im_y sub", (unsigned long) h); + } + } + + /* + * Output start of exec block + */ + fputs("{ % exec\n", fd); + + if (repeat_count > 1) + fprintf(fd, "%d { %% repeat\n", repeat_count); + + /* + * Output filter options and image dictionary. + */ + if (ascii85) + fputs(" /im_stream currentfile /ASCII85Decode filter def\n", + fd); + fputs(" <<\n", fd); + fputs(" /ImageType 1\n", fd); + fprintf(fd, " /Width %lu\n", (unsigned long) tile_width); + /* + * Workaround for some software that may crash when last strip + * of image contains fewer number of scanlines than specified + * by the `/Height' variable. So for stripped images with multiple + * strips we will set `/Height' as `im_h', because one is + * recalculated for each strip - including the (smaller) final strip. + * For tiled images and images with only one strip `/Height' will + * contain number of scanlines in tile (or image height in case of + * one-stripped image). + */ + if (TIFFIsTiled(tif) || tf_numberstrips == 1) + fprintf(fd, " /Height %lu\n", (unsigned long) tile_height); + else + fprintf(fd, " /Height im_h\n"); + + if (planarconfiguration == PLANARCONFIG_SEPARATE && samplesperpixel > 1) + fputs(" /MultipleDataSources true\n", fd); + fprintf(fd, " /ImageMatrix [ %lu 0 0 %ld %s %s ]\n", + (unsigned long) w, - (long)h, im_x, im_y); + fprintf(fd, " /BitsPerComponent %d\n", bitspersample); + fprintf(fd, " /Interpolate %s\n", interpolate ? "true" : "false"); + + switch (samplesperpixel - extrasamples) { + case 1: + switch (photometric) { + case PHOTOMETRIC_MINISBLACK: + fputs(" /Decode [0 1]\n", fd); + break; + case PHOTOMETRIC_MINISWHITE: + switch (compression) { + case COMPRESSION_CCITTRLE: + case COMPRESSION_CCITTRLEW: + case COMPRESSION_CCITTFAX3: + case COMPRESSION_CCITTFAX4: + /* + * Manage inverting with /Blackis1 flag + * since there migth be uncompressed parts + */ + fputs(" /Decode [0 1]\n", fd); + break; + default: + /* + * ERROR... + */ + fputs(" /Decode [1 0]\n", fd); + break; + } + break; + case PHOTOMETRIC_PALETTE: + TIFFGetFieldDefaulted(tif, TIFFTAG_MINSAMPLEVALUE, + &minsamplevalue); + TIFFGetFieldDefaulted(tif, TIFFTAG_MAXSAMPLEVALUE, + &maxsamplevalue); + fprintf(fd, " /Decode [%u %u]\n", + minsamplevalue, maxsamplevalue); + break; + default: + /* + * ERROR ? + */ + fputs(" /Decode [0 1]\n", fd); + break; + } + break; + case 3: + switch (photometric) { + case PHOTOMETRIC_RGB: + fputs(" /Decode [0 1 0 1 0 1]\n", fd); + break; + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + default: + /* + * ERROR?? + */ + fputs(" /Decode [0 1 0 1 0 1]\n", fd); + break; + } + break; + case 4: + /* + * ERROR?? + */ + fputs(" /Decode [0 1 0 1 0 1 0 1]\n", fd); + break; + } + fputs(" /DataSource", fd); + if (planarconfiguration == PLANARCONFIG_SEPARATE && + samplesperpixel > 1) + fputs(" [", fd); + if (ascii85) + fputs(" im_stream", fd); + else + fputs(" currentfile /ASCIIHexDecode filter", fd); + + use_rawdata = TRUE; + switch (compression) { + case COMPRESSION_NONE: /* 1: uncompressed */ + break; + case COMPRESSION_CCITTRLE: /* 2: CCITT modified Huffman RLE */ + case COMPRESSION_CCITTRLEW: /* 32771: #1 w/ word alignment */ + case COMPRESSION_CCITTFAX3: /* 3: CCITT Group 3 fax encoding */ + case COMPRESSION_CCITTFAX4: /* 4: CCITT Group 4 fax encoding */ + fputs("\n\t<<\n", fd); + if (compression == COMPRESSION_CCITTFAX3) { + uint32 g3_options; + + fputs("\t /EndOfLine true\n", fd); + fputs("\t /EndOfBlock false\n", fd); + if (!TIFFGetField(tif, TIFFTAG_GROUP3OPTIONS, + &g3_options)) + g3_options = 0; + if (g3_options & GROUP3OPT_2DENCODING) + fprintf(fd, "\t /K %s\n", im_h); + if (g3_options & GROUP3OPT_UNCOMPRESSED) + fputs("\t /Uncompressed true\n", fd); + if (g3_options & GROUP3OPT_FILLBITS) + fputs("\t /EncodedByteAlign true\n", fd); + } + if (compression == COMPRESSION_CCITTFAX4) { + uint32 g4_options; + + fputs("\t /K -1\n", fd); + TIFFGetFieldDefaulted(tif, TIFFTAG_GROUP4OPTIONS, + &g4_options); + if (g4_options & GROUP4OPT_UNCOMPRESSED) + fputs("\t /Uncompressed true\n", fd); + } + if (!(tile_width == w && w == 1728U)) + fprintf(fd, "\t /Columns %lu\n", + (unsigned long) tile_width); + fprintf(fd, "\t /Rows %s\n", im_h); + if (compression == COMPRESSION_CCITTRLE || + compression == COMPRESSION_CCITTRLEW) { + fputs("\t /EncodedByteAlign true\n", fd); + fputs("\t /EndOfBlock false\n", fd); + } + if (photometric == PHOTOMETRIC_MINISBLACK) + fputs("\t /BlackIs1 true\n", fd); + fprintf(fd, "\t>> /CCITTFaxDecode filter"); + break; + case COMPRESSION_LZW: /* 5: Lempel-Ziv & Welch */ + TIFFGetFieldDefaulted(tif, TIFFTAG_PREDICTOR, &predictor); + if (predictor == 2) { + fputs("\n\t<<\n", fd); + fprintf(fd, "\t /Predictor %u\n", predictor); + fprintf(fd, "\t /Columns %lu\n", + (unsigned long) tile_width); + fprintf(fd, "\t /Colors %u\n", samplesperpixel); + fprintf(fd, "\t /BitsPerComponent %u\n", + bitspersample); + fputs("\t>>", fd); + } + fputs(" /LZWDecode filter", fd); + break; + case COMPRESSION_DEFLATE: /* 5: ZIP */ + case COMPRESSION_ADOBE_DEFLATE: + if ( level3 ) { + TIFFGetFieldDefaulted(tif, TIFFTAG_PREDICTOR, &predictor); + if (predictor > 1) { + fprintf(fd, "\t %% PostScript Level 3 only."); + fputs("\n\t<<\n", fd); + fprintf(fd, "\t /Predictor %u\n", predictor); + fprintf(fd, "\t /Columns %lu\n", + (unsigned long) tile_width); + fprintf(fd, "\t /Colors %u\n", samplesperpixel); + fprintf(fd, "\t /BitsPerComponent %u\n", + bitspersample); + fputs("\t>>", fd); + } + fputs(" /FlateDecode filter", fd); + } else { + use_rawdata = FALSE ; + } + break; + case COMPRESSION_PACKBITS: /* 32773: Macintosh RLE */ + fputs(" /RunLengthDecode filter", fd); + use_rawdata = TRUE; + break; + case COMPRESSION_OJPEG: /* 6: !6.0 JPEG */ + case COMPRESSION_JPEG: /* 7: %JPEG DCT compression */ +#ifdef notdef + /* + * Code not tested yet + */ + fputs(" /DCTDecode filter", fd); + use_rawdata = TRUE; +#else + use_rawdata = FALSE; +#endif + break; + case COMPRESSION_NEXT: /* 32766: NeXT 2-bit RLE */ + case COMPRESSION_THUNDERSCAN: /* 32809: ThunderScan RLE */ + case COMPRESSION_PIXARFILM: /* 32908: Pixar companded 10bit LZW */ + case COMPRESSION_JBIG: /* 34661: ISO JBIG */ + use_rawdata = FALSE; + break; + case COMPRESSION_SGILOG: /* 34676: SGI LogL or LogLuv */ + case COMPRESSION_SGILOG24: /* 34677: SGI 24-bit LogLuv */ + use_rawdata = FALSE; + break; + default: + /* + * ERROR... + */ + use_rawdata = FALSE; + break; + } + if (planarconfiguration == PLANARCONFIG_SEPARATE && + samplesperpixel > 1) { + uint16 i; + + /* + * NOTE: This code does not work yet... + */ + for (i = 1; i < samplesperpixel; i++) + fputs(" dup", fd); + fputs(" ]", fd); + } + + fprintf( fd, "\n >> %s\n", imageOp ); + if (ascii85) + fputs(" im_stream status { im_stream flushfile } if\n", fd); + if (repeat_count > 1) { + if (tile_width < w) { + fprintf(fd, " /im_x im_x %lu add def\n", + (unsigned long) tile_width); + if (tile_height < h) { + fprintf(fd, " im_x %lu ge {\n", + (unsigned long) w); + fputs(" /im_x 0 def\n", fd); + fprintf(fd, " /im_y im_y %lu add def\n", + (unsigned long) tile_height); + fputs(" } if\n", fd); + } + } + if (tile_height < h) { + if (tile_width >= w) { + fprintf(fd, " /im_y im_y %lu add def\n", + (unsigned long) tile_height); + if (!TIFFIsTiled(tif)) { + fprintf(fd, " /im_h %lu im_y sub", + (unsigned long) h); + fprintf(fd, " dup %lu gt { pop", + (unsigned long) tile_height); + fprintf(fd, " %lu } if def\n", + (unsigned long) tile_height); + } + } + } + fputs("} repeat\n", fd); + } + /* + * End of exec function + */ + fputs("}\n", fd); + + return(use_rawdata); +} + +/* Flip the byte order of buffers with 16 bit samples */ +static void +PS_FlipBytes(unsigned char* buf, tsize_t count) +{ + int i; + unsigned char temp; + + if (count <= 0 || bitspersample <= 8) { + return; + } + + count--; + + for (i = 0; i < count; i += 2) { + temp = buf[i]; + buf[i] = buf[i + 1]; + buf[i + 1] = temp; + } +} + +#define MAXLINE 36 + +int +PS_Lvl2page(FILE* fd, TIFF* tif, uint32 w, uint32 h) +{ + uint16 fillorder; + int use_rawdata, tiled_image, breaklen = MAXLINE; + uint32 chunk_no, num_chunks; + uint64 *bc; + unsigned char *buf_data, *cp; + tsize_t chunk_size, byte_count; + +#if defined( EXP_ASCII85ENCODER ) + tsize_t ascii85_l; /* Length, in bytes, of ascii85_p[] data */ + uint8 * ascii85_p = 0; /* Holds ASCII85 encoded data */ +#endif + + PS_Lvl2colorspace(fd, tif); + use_rawdata = PS_Lvl2ImageDict(fd, tif, w, h); + +/* See http://bugzilla.remotesensing.org/show_bug.cgi?id=80 */ +#ifdef ENABLE_BROKEN_BEGINENDDATA + fputs("%%BeginData:\n", fd); +#endif + fputs("exec\n", fd); + + tiled_image = TIFFIsTiled(tif); + if (tiled_image) { + num_chunks = TIFFNumberOfTiles(tif); + TIFFGetField(tif, TIFFTAG_TILEBYTECOUNTS, &bc); + } else { + num_chunks = TIFFNumberOfStrips(tif); + TIFFGetField(tif, TIFFTAG_STRIPBYTECOUNTS, &bc); + } + + if (use_rawdata) { + chunk_size = (tsize_t) bc[0]; + for (chunk_no = 1; chunk_no < num_chunks; chunk_no++) + if ((tsize_t) bc[chunk_no] > chunk_size) + chunk_size = (tsize_t) bc[chunk_no]; + } else { + if (tiled_image) + chunk_size = TIFFTileSize(tif); + else + chunk_size = TIFFStripSize(tif); + } + buf_data = (unsigned char *)_TIFFmalloc(chunk_size); + if (!buf_data) { + TIFFError(filename, "Can't alloc %lu bytes for %s.", + (unsigned long) chunk_size, tiled_image ? "tiles" : "strips"); + return(FALSE); + } + +#if defined( EXP_ASCII85ENCODER ) + if ( ascii85 ) { + /* + * Allocate a buffer to hold the ASCII85 encoded data. Note + * that it is allocated with sufficient room to hold the + * encoded data (5*chunk_size/4) plus the EOD marker (+8) + * and formatting line breaks. The line breaks are more + * than taken care of by using 6*chunk_size/4 rather than + * 5*chunk_size/4. + */ + + ascii85_p = _TIFFmalloc( (chunk_size+(chunk_size/2)) + 8 ); + + if ( !ascii85_p ) { + _TIFFfree( buf_data ); + + TIFFError( filename, "Cannot allocate ASCII85 encoding buffer." ); + return ( FALSE ); + } + } +#endif + + TIFFGetFieldDefaulted(tif, TIFFTAG_FILLORDER, &fillorder); + for (chunk_no = 0; chunk_no < num_chunks; chunk_no++) { + if (ascii85) + Ascii85Init(); + else + breaklen = MAXLINE; + if (use_rawdata) { + if (tiled_image) + byte_count = TIFFReadRawTile(tif, chunk_no, + buf_data, chunk_size); + else + byte_count = TIFFReadRawStrip(tif, chunk_no, + buf_data, chunk_size); + if (fillorder == FILLORDER_LSB2MSB) + TIFFReverseBits(buf_data, byte_count); + } else { + if (tiled_image) + byte_count = TIFFReadEncodedTile(tif, + chunk_no, buf_data, + chunk_size); + else + byte_count = TIFFReadEncodedStrip(tif, + chunk_no, buf_data, + chunk_size); + } + if (byte_count < 0) { + TIFFError(filename, "Can't read %s %d.", + tiled_image ? "tile" : "strip", chunk_no); + if (ascii85) + Ascii85Put('\0', fd); + } + /* + * for 16 bits, the two bytes must be most significant + * byte first + */ + if (bitspersample == 16 && !TIFFIsBigEndian(tif)) { + PS_FlipBytes(buf_data, byte_count); + } + /* + * For images with alpha, matte against a white background; + * i.e. Cback * (1 - Aimage) where Cback = 1. We will fill the + * lower part of the buffer with the modified values. + * + * XXX: needs better solution + */ + if (alpha) { + int adjust, i, j = 0; + int ncomps = samplesperpixel - extrasamples; + for (i = 0; i < byte_count; i+=samplesperpixel) { + adjust = 255 - buf_data[i + ncomps]; + switch (ncomps) { + case 1: + buf_data[j++] = buf_data[i] + adjust; + break; + case 2: + buf_data[j++] = buf_data[i] + adjust; + buf_data[j++] = buf_data[i+1] + adjust; + break; + case 3: + buf_data[j++] = buf_data[i] + adjust; + buf_data[j++] = buf_data[i+1] + adjust; + buf_data[j++] = buf_data[i+2] + adjust; + break; + } + } + byte_count -= j; + } + + if (ascii85) { +#if defined( EXP_ASCII85ENCODER ) + ascii85_l = Ascii85EncodeBlock(ascii85_p, 1, buf_data, byte_count ); + + if ( ascii85_l > 0 ) + fwrite( ascii85_p, ascii85_l, 1, fd ); +#else + for (cp = buf_data; byte_count > 0; byte_count--) + Ascii85Put(*cp++, fd); +#endif + } + else + { + for (cp = buf_data; byte_count > 0; byte_count--) { + putc(hex[((*cp)>>4)&0xf], fd); + putc(hex[(*cp)&0xf], fd); + cp++; + + if (--breaklen <= 0) { + putc('\n', fd); + breaklen = MAXLINE; + } + } + } + + if ( !ascii85 ) { + if ( level2 || level3 ) + putc( '>', fd ); + putc('\n', fd); + } +#if !defined( EXP_ASCII85ENCODER ) + else + Ascii85Flush(fd); +#endif + } + +#if defined( EXP_ASCII85ENCODER ) + if ( ascii85_p ) + _TIFFfree( ascii85_p ); +#endif + + _TIFFfree(buf_data); +#ifdef ENABLE_BROKEN_BEGINENDDATA + fputs("%%EndData\n", fd); +#endif + return(TRUE); +} + +void +PSpage(FILE* fd, TIFF* tif, uint32 w, uint32 h) +{ + char * imageOp = "image"; + + if ( useImagemask && (bitspersample == 1) ) + imageOp = "imagemask"; + + if ((level2 || level3) && PS_Lvl2page(fd, tif, w, h)) + return; + ps_bytesperrow = tf_bytesperrow - (extrasamples * bitspersample / 8)*w; + switch (photometric) { + case PHOTOMETRIC_RGB: + if (planarconfiguration == PLANARCONFIG_CONTIG) { + fprintf(fd, "%s", RGBcolorimage); + PSColorContigPreamble(fd, w, h, 3); + PSDataColorContig(fd, tif, w, h, 3); + } else { + PSColorSeparatePreamble(fd, w, h, 3); + PSDataColorSeparate(fd, tif, w, h, 3); + } + break; + case PHOTOMETRIC_SEPARATED: + /* XXX should emit CMYKcolorimage */ + if (planarconfiguration == PLANARCONFIG_CONTIG) { + PSColorContigPreamble(fd, w, h, 4); + PSDataColorContig(fd, tif, w, h, 4); + } else { + PSColorSeparatePreamble(fd, w, h, 4); + PSDataColorSeparate(fd, tif, w, h, 4); + } + break; + case PHOTOMETRIC_PALETTE: + fprintf(fd, "%s", RGBcolorimage); + PhotoshopBanner(fd, w, h, 1, 3, "false 3 colorimage"); + fprintf(fd, "/scanLine %ld string def\n", + (long) ps_bytesperrow * 3L); + fprintf(fd, "%lu %lu 8\n", + (unsigned long) w, (unsigned long) h); + fprintf(fd, "[%lu 0 0 -%lu 0 %lu]\n", + (unsigned long) w, (unsigned long) h, (unsigned long) h); + fprintf(fd, "{currentfile scanLine readhexstring pop} bind\n"); + fprintf(fd, "false 3 colorimage\n"); + PSDataPalette(fd, tif, w, h); + break; + case PHOTOMETRIC_MINISBLACK: + case PHOTOMETRIC_MINISWHITE: + PhotoshopBanner(fd, w, h, 1, 1, imageOp); + fprintf(fd, "/scanLine %ld string def\n", + (long) ps_bytesperrow); + fprintf(fd, "%lu %lu %d\n", + (unsigned long) w, (unsigned long) h, bitspersample); + fprintf(fd, "[%lu 0 0 -%lu 0 %lu]\n", + (unsigned long) w, (unsigned long) h, (unsigned long) h); + fprintf(fd, + "{currentfile scanLine readhexstring pop} bind\n"); + fprintf(fd, "%s\n", imageOp); + PSDataBW(fd, tif, w, h); + break; + } + putc('\n', fd); +} + +void +PSColorContigPreamble(FILE* fd, uint32 w, uint32 h, int nc) +{ + ps_bytesperrow = nc * (tf_bytesperrow / samplesperpixel); + PhotoshopBanner(fd, w, h, 1, nc, "false %d colorimage"); + fprintf(fd, "/line %ld string def\n", (long) ps_bytesperrow); + fprintf(fd, "%lu %lu %d\n", + (unsigned long) w, (unsigned long) h, bitspersample); + fprintf(fd, "[%lu 0 0 -%lu 0 %lu]\n", + (unsigned long) w, (unsigned long) h, (unsigned long) h); + fprintf(fd, "{currentfile line readhexstring pop} bind\n"); + fprintf(fd, "false %d colorimage\n", nc); +} + +void +PSColorSeparatePreamble(FILE* fd, uint32 w, uint32 h, int nc) +{ + int i; + + PhotoshopBanner(fd, w, h, ps_bytesperrow, nc, "true %d colorimage"); + for (i = 0; i < nc; i++) + fprintf(fd, "/line%d %ld string def\n", + i, (long) ps_bytesperrow); + fprintf(fd, "%lu %lu %d\n", + (unsigned long) w, (unsigned long) h, bitspersample); + fprintf(fd, "[%lu 0 0 -%lu 0 %lu] \n", + (unsigned long) w, (unsigned long) h, (unsigned long) h); + for (i = 0; i < nc; i++) + fprintf(fd, "{currentfile line%d readhexstring pop}bind\n", i); + fprintf(fd, "true %d colorimage\n", nc); +} + +#define DOBREAK(len, howmany, fd) \ + if (((len) -= (howmany)) <= 0) { \ + putc('\n', fd); \ + (len) = MAXLINE-(howmany); \ + } +#define PUTHEX(c,fd) putc(hex[((c)>>4)&0xf],fd); putc(hex[(c)&0xf],fd) + +void +PSDataColorContig(FILE* fd, TIFF* tif, uint32 w, uint32 h, int nc) +{ + uint32 row; + int breaklen = MAXLINE, es = samplesperpixel - nc; + tsize_t cc; + unsigned char *tf_buf; + unsigned char *cp, c; + + (void) w; + tf_buf = (unsigned char *) _TIFFmalloc(tf_bytesperrow); + if (tf_buf == NULL) { + TIFFError(filename, "No space for scanline buffer"); + return; + } + for (row = 0; row < h; row++) { + if (TIFFReadScanline(tif, tf_buf, row, 0) < 0) + break; + cp = tf_buf; + /* + * for 16 bits, the two bytes must be most significant + * byte first + */ + if (bitspersample == 16 && !HOST_BIGENDIAN) { + PS_FlipBytes(cp, tf_bytesperrow); + } + if (alpha) { + int adjust; + cc = 0; + for (; cc < tf_bytesperrow; cc += samplesperpixel) { + DOBREAK(breaklen, nc, fd); + /* + * For images with alpha, matte against + * a white background; i.e. + * Cback * (1 - Aimage) + * where Cback = 1. + */ + adjust = 255 - cp[nc]; + switch (nc) { + case 4: c = *cp++ + adjust; PUTHEX(c,fd); + case 3: c = *cp++ + adjust; PUTHEX(c,fd); + case 2: c = *cp++ + adjust; PUTHEX(c,fd); + case 1: c = *cp++ + adjust; PUTHEX(c,fd); + } + cp += es; + } + } else { + cc = 0; + for (; cc < tf_bytesperrow; cc += samplesperpixel) { + DOBREAK(breaklen, nc, fd); + switch (nc) { + case 4: c = *cp++; PUTHEX(c,fd); + case 3: c = *cp++; PUTHEX(c,fd); + case 2: c = *cp++; PUTHEX(c,fd); + case 1: c = *cp++; PUTHEX(c,fd); + } + cp += es; + } + } + } + _TIFFfree((char *) tf_buf); +} + +void +PSDataColorSeparate(FILE* fd, TIFF* tif, uint32 w, uint32 h, int nc) +{ + uint32 row; + int breaklen = MAXLINE; + tsize_t cc; + tsample_t s, maxs; + unsigned char *tf_buf; + unsigned char *cp, c; + + (void) w; + tf_buf = (unsigned char *) _TIFFmalloc(tf_bytesperrow); + if (tf_buf == NULL) { + TIFFError(filename, "No space for scanline buffer"); + return; + } + maxs = (samplesperpixel > nc ? nc : samplesperpixel); + for (row = 0; row < h; row++) { + for (s = 0; s < maxs; s++) { + if (TIFFReadScanline(tif, tf_buf, row, s) < 0) + break; + for (cp = tf_buf, cc = 0; cc < tf_bytesperrow; cc++) { + DOBREAK(breaklen, 1, fd); + c = *cp++; + PUTHEX(c,fd); + } + } + } + _TIFFfree((char *) tf_buf); +} + +#define PUTRGBHEX(c,fd) \ + PUTHEX(rmap[c],fd); PUTHEX(gmap[c],fd); PUTHEX(bmap[c],fd) + +void +PSDataPalette(FILE* fd, TIFF* tif, uint32 w, uint32 h) +{ + uint16 *rmap, *gmap, *bmap; + uint32 row; + int breaklen = MAXLINE, nc; + tsize_t cc; + unsigned char *tf_buf; + unsigned char *cp, c; + + (void) w; + if (!TIFFGetField(tif, TIFFTAG_COLORMAP, &rmap, &gmap, &bmap)) { + TIFFError(filename, "Palette image w/o \"Colormap\" tag"); + return; + } + switch (bitspersample) { + case 8: case 4: case 2: case 1: + break; + default: + TIFFError(filename, "Depth %d not supported", bitspersample); + return; + } + nc = 3 * (8 / bitspersample); + tf_buf = (unsigned char *) _TIFFmalloc(tf_bytesperrow); + if (tf_buf == NULL) { + TIFFError(filename, "No space for scanline buffer"); + return; + } + if (checkcmap(tif, 1<= 0; i--) { + rmap[i] = CVT(rmap[i]); + gmap[i] = CVT(gmap[i]); + bmap[i] = CVT(bmap[i]); + } +#undef CVT + } + for (row = 0; row < h; row++) { + if (TIFFReadScanline(tif, tf_buf, row, 0) < 0) + break; + for (cp = tf_buf, cc = 0; cc < tf_bytesperrow; cc++) { + DOBREAK(breaklen, nc, fd); + switch (bitspersample) { + case 8: + c = *cp++; PUTRGBHEX(c, fd); + break; + case 4: + c = *cp++; PUTRGBHEX(c&0xf, fd); + c >>= 4; PUTRGBHEX(c, fd); + break; + case 2: + c = *cp++; PUTRGBHEX(c&0x3, fd); + c >>= 2; PUTRGBHEX(c&0x3, fd); + c >>= 2; PUTRGBHEX(c&0x3, fd); + c >>= 2; PUTRGBHEX(c, fd); + break; + case 1: + c = *cp++; PUTRGBHEX(c&0x1, fd); + c >>= 1; PUTRGBHEX(c&0x1, fd); + c >>= 1; PUTRGBHEX(c&0x1, fd); + c >>= 1; PUTRGBHEX(c&0x1, fd); + c >>= 1; PUTRGBHEX(c&0x1, fd); + c >>= 1; PUTRGBHEX(c&0x1, fd); + c >>= 1; PUTRGBHEX(c&0x1, fd); + c >>= 1; PUTRGBHEX(c, fd); + break; + } + } + } + _TIFFfree((char *) tf_buf); +} + +void +PSDataBW(FILE* fd, TIFF* tif, uint32 w, uint32 h) +{ + int breaklen = MAXLINE; + unsigned char* tf_buf; + unsigned char* cp; + tsize_t stripsize = TIFFStripSize(tif); + tstrip_t s; + +#if defined( EXP_ASCII85ENCODER ) + tsize_t ascii85_l; /* Length, in bytes, of ascii85_p[] data */ + uint8 *ascii85_p = 0; /* Holds ASCII85 encoded data */ +#endif + + (void) w; (void) h; + tf_buf = (unsigned char *) _TIFFmalloc(stripsize); + if (tf_buf == NULL) { + TIFFError(filename, "No space for scanline buffer"); + return; + } + + // FIXME + memset(tf_buf, 0, stripsize); + +#if defined( EXP_ASCII85ENCODER ) + if ( ascii85 ) { + /* + * Allocate a buffer to hold the ASCII85 encoded data. Note + * that it is allocated with sufficient room to hold the + * encoded data (5*stripsize/4) plus the EOD marker (+8) + * and formatting line breaks. The line breaks are more + * than taken care of by using 6*stripsize/4 rather than + * 5*stripsize/4. + */ + + ascii85_p = _TIFFmalloc( (stripsize+(stripsize/2)) + 8 ); + + if ( !ascii85_p ) { + _TIFFfree( tf_buf ); + + TIFFError( filename, "Cannot allocate ASCII85 encoding buffer." ); + return; + } + } +#endif + + if (ascii85) + Ascii85Init(); + + for (s = 0; s < TIFFNumberOfStrips(tif); s++) { + tmsize_t cc = TIFFReadEncodedStrip(tif, s, tf_buf, stripsize); + if (cc < 0) { + TIFFError(filename, "Can't read strip"); + break; + } + cp = tf_buf; + if (photometric == PHOTOMETRIC_MINISWHITE) { + for (cp += cc; --cp >= tf_buf;) + *cp = ~*cp; + cp++; + } + /* + * for 16 bits, the two bytes must be most significant + * byte first + */ + if (bitspersample == 16 && !HOST_BIGENDIAN) { + PS_FlipBytes(cp, cc); + } + if (ascii85) { +#if defined( EXP_ASCII85ENCODER ) + if (alpha) { + int adjust, i; + for (i = 0; i < cc; i+=2) { + adjust = 255 - cp[i + 1]; + cp[i / 2] = cp[i] + adjust; + } + cc /= 2; + } + + ascii85_l = Ascii85EncodeBlock( ascii85_p, 1, cp, cc ); + + if ( ascii85_l > 0 ) + fwrite( ascii85_p, ascii85_l, 1, fd ); +#else + while (cc-- > 0) + Ascii85Put(*cp++, fd); +#endif /* EXP_ASCII85_ENCODER */ + } else { + unsigned char c; + + if (alpha) { + int adjust; + while (cc-- > 0) { + DOBREAK(breaklen, 1, fd); + /* + * For images with alpha, matte against + * a white background; i.e. + * Cback * (1 - Aimage) + * where Cback = 1. + */ + adjust = 255 - cp[1]; + c = *cp++ + adjust; PUTHEX(c,fd); + cp++, cc--; + } + } else { + while (cc-- > 0) { + c = *cp++; + DOBREAK(breaklen, 1, fd); + PUTHEX(c, fd); + } + } + } + } + + if ( !ascii85 ) + { + if ( level2 || level3) + fputs(">\n", fd); + } +#if !defined( EXP_ASCII85ENCODER ) + else + Ascii85Flush(fd); +#else + if ( ascii85_p ) + _TIFFfree( ascii85_p ); +#endif + + _TIFFfree(tf_buf); +} + +void +PSRawDataBW(FILE* fd, TIFF* tif, uint32 w, uint32 h) +{ + uint64 *bc; + uint32 bufsize; + int breaklen = MAXLINE; + tmsize_t cc; + uint16 fillorder; + unsigned char *tf_buf; + unsigned char *cp, c; + tstrip_t s; + +#if defined( EXP_ASCII85ENCODER ) + tsize_t ascii85_l; /* Length, in bytes, of ascii85_p[] data */ + uint8 * ascii85_p = 0; /* Holds ASCII85 encoded data */ +#endif + + (void) w; (void) h; + TIFFGetFieldDefaulted(tif, TIFFTAG_FILLORDER, &fillorder); + TIFFGetField(tif, TIFFTAG_STRIPBYTECOUNTS, &bc); + + /* + * Find largest strip: + */ + + bufsize = (uint32) bc[0]; + + for ( s = 0; ++s < (tstrip_t)tf_numberstrips; ) { + if ( bc[s] > bufsize ) + bufsize = (uint32) bc[s]; + } + + tf_buf = (unsigned char*) _TIFFmalloc(bufsize); + if (tf_buf == NULL) { + TIFFError(filename, "No space for strip buffer"); + return; + } + +#if defined( EXP_ASCII85ENCODER ) + if ( ascii85 ) { + /* + * Allocate a buffer to hold the ASCII85 encoded data. Note + * that it is allocated with sufficient room to hold the + * encoded data (5*bufsize/4) plus the EOD marker (+8) + * and formatting line breaks. The line breaks are more + * than taken care of by using 6*bufsize/4 rather than + * 5*bufsize/4. + */ + + ascii85_p = _TIFFmalloc( (bufsize+(bufsize/2)) + 8 ); + + if ( !ascii85_p ) { + _TIFFfree( tf_buf ); + + TIFFError( filename, "Cannot allocate ASCII85 encoding buffer." ); + return; + } + } +#endif + + for (s = 0; s < (tstrip_t) tf_numberstrips; s++) { + cc = TIFFReadRawStrip(tif, s, tf_buf, (tmsize_t) bc[s]); + if (cc < 0) { + TIFFError(filename, "Can't read strip"); + break; + } + if (fillorder == FILLORDER_LSB2MSB) + TIFFReverseBits(tf_buf, cc); + if (!ascii85) { + for (cp = tf_buf; cc > 0; cc--) { + DOBREAK(breaklen, 1, fd); + c = *cp++; + PUTHEX(c, fd); + } + fputs(">\n", fd); + breaklen = MAXLINE; + } else { + Ascii85Init(); +#if defined( EXP_ASCII85ENCODER ) + ascii85_l = Ascii85EncodeBlock( ascii85_p, 1, tf_buf, cc ); + + if ( ascii85_l > 0 ) + fwrite( ascii85_p, ascii85_l, 1, fd ); +#else + for (cp = tf_buf; cc > 0; cc--) + Ascii85Put(*cp++, fd); + Ascii85Flush(fd); +#endif /* EXP_ASCII85ENCODER */ + } + } + _TIFFfree((char *) tf_buf); + +#if defined( EXP_ASCII85ENCODER ) + if ( ascii85_p ) + _TIFFfree( ascii85_p ); +#endif +} + +void +Ascii85Init(void) +{ + ascii85breaklen = 2*MAXLINE; + ascii85count = 0; +} + +static char* +Ascii85Encode(unsigned char* raw) +{ + static char encoded[6]; + uint32 word; + + word = (((raw[0]<<8)+raw[1])<<16) + (raw[2]<<8) + raw[3]; + if (word != 0L) { + uint32 q; + uint16 w1; + + q = word / (85L*85*85*85); /* actually only a byte */ + encoded[0] = (char) (q + '!'); + + word -= q * (85L*85*85*85); q = word / (85L*85*85); + encoded[1] = (char) (q + '!'); + + word -= q * (85L*85*85); q = word / (85*85); + encoded[2] = (char) (q + '!'); + + w1 = (uint16) (word - q*(85L*85)); + encoded[3] = (char) ((w1 / 85) + '!'); + encoded[4] = (char) ((w1 % 85) + '!'); + encoded[5] = '\0'; + } else + encoded[0] = 'z', encoded[1] = '\0'; + return (encoded); +} + +void +Ascii85Put(unsigned char code, FILE* fd) +{ + ascii85buf[ascii85count++] = code; + if (ascii85count >= 4) { + unsigned char* p; + int n; + + for (n = ascii85count, p = ascii85buf; n >= 4; n -= 4, p += 4) { + char* cp; + for (cp = Ascii85Encode(p); *cp; cp++) { + putc(*cp, fd); + if (--ascii85breaklen == 0) { + putc('\n', fd); + ascii85breaklen = 2*MAXLINE; + } + } + } + _TIFFmemcpy(ascii85buf, p, n); + ascii85count = n; + } +} + +void +Ascii85Flush(FILE* fd) +{ + if (ascii85count > 0) { + char* res; + _TIFFmemset(&ascii85buf[ascii85count], 0, 3); + res = Ascii85Encode(ascii85buf); + fwrite(res[0] == 'z' ? "!!!!" : res, ascii85count + 1, 1, fd); + } + fputs("~>\n", fd); +} +#if defined( EXP_ASCII85ENCODER) + +#define A85BREAKCNTR ascii85breaklen +#define A85BREAKLEN (2*MAXLINE) + +/***************************************************************************** +* +* Name: Ascii85EncodeBlock( ascii85_p, f_eod, raw_p, raw_l ) +* +* Description: This routine will encode the raw data in the buffer described +* by raw_p and raw_l into ASCII85 format and store the encoding +* in the buffer given by ascii85_p. +* +* Parameters: ascii85_p - A buffer supplied by the caller which will +* contain the encoded ASCII85 data. +* f_eod - Flag: Nz means to end the encoded buffer with +* an End-Of-Data marker. +* raw_p - Pointer to the buffer of data to be encoded +* raw_l - Number of bytes in raw_p[] to be encoded +* +* Returns: (int) < 0 Error, see errno +* >= 0 Number of bytes written to ascii85_p[]. +* +* Notes: An external variable given by A85BREAKCNTR is used to +* determine when to insert newline characters into the +* encoded data. As each byte is placed into ascii85_p this +* external is decremented. If the variable is decrement to +* or past zero then a newline is inserted into ascii85_p +* and the A85BREAKCNTR is then reset to A85BREAKLEN. +* Note: for efficiency reasons the A85BREAKCNTR variable +* is not actually checked on *every* character +* placed into ascii85_p but often only for every +* 5 characters. +* +* THE CALLER IS RESPONSIBLE FOR ENSURING THAT ASCII85_P[] IS +* SUFFICIENTLY LARGE TO THE ENCODED DATA! +* You will need at least 5 * (raw_l/4) bytes plus space for +* newline characters and space for an EOD marker (if +* requested). A safe calculation is to use 6*(raw_l/4) + 8 +* to size ascii85_p. +* +*****************************************************************************/ + +tsize_t Ascii85EncodeBlock( uint8 * ascii85_p, unsigned f_eod, const uint8 * raw_p, tsize_t raw_l ) + +{ + char ascii85[5]; /* Encoded 5 tuple */ + tsize_t ascii85_l; /* Number of bytes written to ascii85_p[] */ + int rc; /* Return code */ + uint32 val32; /* Unencoded 4 tuple */ + + ascii85_l = 0; /* Nothing written yet */ + + if ( raw_p ) + { + --raw_p; /* Prepare for pre-increment fetches */ + + for ( ; raw_l > 3; raw_l -= 4 ) + { + val32 = *(++raw_p) << 24; + val32 += *(++raw_p) << 16; + val32 += *(++raw_p) << 8; + val32 += *(++raw_p); + + if ( val32 == 0 ) /* Special case */ + { + ascii85_p[ascii85_l] = 'z'; + rc = 1; + } + + else + { + ascii85[4] = (char) ((val32 % 85) + 33); + val32 /= 85; + + ascii85[3] = (char) ((val32 % 85) + 33); + val32 /= 85; + + ascii85[2] = (char) ((val32 % 85) + 33); + val32 /= 85; + + ascii85[1] = (char) ((val32 % 85) + 33); + ascii85[0] = (char) ((val32 / 85) + 33); + + _TIFFmemcpy( &ascii85_p[ascii85_l], ascii85, sizeof(ascii85) ); + rc = sizeof(ascii85); + } + + ascii85_l += rc; + + if ( (A85BREAKCNTR -= rc) <= 0 ) + { + ascii85_p[ascii85_l] = '\n'; + ++ascii85_l; + A85BREAKCNTR = A85BREAKLEN; + } + } + + /* + * Output any straggler bytes: + */ + + if ( raw_l > 0 ) + { + tsize_t len; /* Output this many bytes */ + + len = raw_l + 1; + val32 = *++raw_p << 24; /* Prime the pump */ + + if ( --raw_l > 0 ) val32 += *(++raw_p) << 16; + if ( --raw_l > 0 ) val32 += *(++raw_p) << 8; + + val32 /= 85; + + ascii85[3] = (char) ((val32 % 85) + 33); + val32 /= 85; + + ascii85[2] = (char) ((val32 % 85) + 33); + val32 /= 85; + + ascii85[1] = (char) ((val32 % 85) + 33); + ascii85[0] = (char) ((val32 / 85) + 33); + + _TIFFmemcpy( &ascii85_p[ascii85_l], ascii85, len ); + ascii85_l += len; + } + } + + /* + * If requested add an ASCII85 End Of Data marker: + */ + + if ( f_eod ) + { + ascii85_p[ascii85_l++] = '~'; + ascii85_p[ascii85_l++] = '>'; + ascii85_p[ascii85_l++] = '\n'; + } + + return ( ascii85_l ); + +} /* Ascii85EncodeBlock() */ + +#endif /* EXP_ASCII85ENCODER */ + + +char* stuff[] = { +"usage: tiff2ps [options] input.tif ...", +"where options are:", +" -1 generate PostScript Level 1 (default)", +" -2 generate PostScript Level 2", +" -3 generate PostScript Level 3", +" -8 disable use of ASCII85 encoding with PostScript Level 2/3", +" -a convert all directories in file (default is first), Not EPS", +" -b # set the bottom margin to # inches", +" -c center image (-b and -l still add to this)", +" -d # set initial directory to # counting from zero", +" -D enable duplex printing (two pages per sheet of paper)", +" -e generate Encapsulated PostScript (EPS) (implies -z)", +" -h # set printed page height to # inches (no default)", +" -w # set printed page width to # inches (no default)", +" -H # split image if height is more than # inches", +" -P L or P set optional PageOrientation DSC comment to Landscape or Portrait", +" -W # split image if width is more than # inches", +" -L # overLap split images by # inches", +" -i # enable/disable (Nz/0) pixel interpolation (default: enable)", +" -l # set the left margin to # inches", +" -m use \"imagemask\" operator instead of \"image\"", +" -o # convert directory at file offset # bytes", +" -O file write PostScript to file instead of standard output", +" -p generate regular PostScript", +" -r # or auto rotate by 90, 180, 270 degrees or auto", +" -s generate PostScript for a single image", +" -t name set postscript document title. Otherwise the filename is used", +" -T print pages for top edge binding", +" -x override resolution units as centimeters", +" -y override resolution units as inches", +" -z enable printing in the deadzone (only for PostScript Level 2/3)", +NULL +}; + +static void +usage(int code) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(code); +} + diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiff2rgba.c b/src/SDL2/external/tiff-4.0.3/tools/tiff2rgba.c new file mode 100644 index 000000000..737167c7a --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiff2rgba.c @@ -0,0 +1,541 @@ +/* $Id: tiff2rgba.c,v 1.19 2011-02-23 21:46:09 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1991-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffiop.h" +#include "tiffio.h" + +#define streq(a,b) (strcmp(a,b) == 0) +#define CopyField(tag, v) \ + if (TIFFGetField(in, tag, &v)) TIFFSetField(out, tag, v) + +#ifndef howmany +#define howmany(x, y) (((x)+((y)-1))/(y)) +#endif +#define roundup(x, y) (howmany(x,y)*((uint32)(y))) + +uint16 compression = COMPRESSION_PACKBITS; +uint32 rowsperstrip = (uint32) -1; +int process_by_block = 0; /* default is whole image at once */ +int no_alpha = 0; +int bigtiff_output = 0; + + +static int tiffcvt(TIFF* in, TIFF* out); +static void usage(int code); + +int +main(int argc, char* argv[]) +{ + TIFF *in, *out; + int c; + extern int optind; + extern char *optarg; + + while ((c = getopt(argc, argv, "c:r:t:bn8")) != -1) + switch (c) { + case 'b': + process_by_block = 1; + break; + + case 'c': + if (streq(optarg, "none")) + compression = COMPRESSION_NONE; + else if (streq(optarg, "packbits")) + compression = COMPRESSION_PACKBITS; + else if (streq(optarg, "lzw")) + compression = COMPRESSION_LZW; + else if (streq(optarg, "jpeg")) + compression = COMPRESSION_JPEG; + else if (streq(optarg, "zip")) + compression = COMPRESSION_DEFLATE; + else + usage(-1); + break; + + case 'r': + rowsperstrip = atoi(optarg); + break; + + case 't': + rowsperstrip = atoi(optarg); + break; + + case 'n': + no_alpha = 1; + break; + + case '8': + bigtiff_output = 1; + break; + + case '?': + usage(0); + /*NOTREACHED*/ + } + + if (argc - optind < 2) + usage(-1); + + out = TIFFOpen(argv[argc-1], bigtiff_output?"w8":"w"); + if (out == NULL) + return (-2); + + for (; optind < argc-1; optind++) { + in = TIFFOpen(argv[optind], "r"); + if (in != NULL) { + do { + if (!tiffcvt(in, out) || + !TIFFWriteDirectory(out)) { + (void) TIFFClose(out); + (void) TIFFClose(in); + return (1); + } + } while (TIFFReadDirectory(in)); + (void) TIFFClose(in); + } + } + (void) TIFFClose(out); + return (0); +} + +static int +cvt_by_tile( TIFF *in, TIFF *out ) + +{ + uint32* raster; /* retrieve RGBA image */ + uint32 width, height; /* image width & height */ + uint32 tile_width, tile_height; + uint32 row, col; + uint32 *wrk_line; + int ok = 1; + + TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &width); + TIFFGetField(in, TIFFTAG_IMAGELENGTH, &height); + + if( !TIFFGetField(in, TIFFTAG_TILEWIDTH, &tile_width) + || !TIFFGetField(in, TIFFTAG_TILELENGTH, &tile_height) ) { + TIFFError(TIFFFileName(in), "Source image not tiled"); + return (0); + } + + TIFFSetField(out, TIFFTAG_TILEWIDTH, tile_width ); + TIFFSetField(out, TIFFTAG_TILELENGTH, tile_height ); + + /* + * Allocate tile buffer + */ + raster = (uint32*)_TIFFmalloc(tile_width * tile_height * sizeof (uint32)); + if (raster == 0) { + TIFFError(TIFFFileName(in), "No space for raster buffer"); + return (0); + } + + /* + * Allocate a scanline buffer for swapping during the vertical + * mirroring pass. + */ + wrk_line = (uint32*)_TIFFmalloc(tile_width * sizeof (uint32)); + if (!wrk_line) { + TIFFError(TIFFFileName(in), "No space for raster scanline buffer"); + ok = 0; + } + + /* + * Loop over the tiles. + */ + for( row = 0; ok && row < height; row += tile_height ) + { + for( col = 0; ok && col < width; col += tile_width ) + { + uint32 i_row; + + /* Read the tile into an RGBA array */ + if (!TIFFReadRGBATile(in, col, row, raster)) { + ok = 0; + break; + } + + + /* + * XXX: raster array has 4-byte unsigned integer type, that is why + * we should rearrange it here. + */ +#if HOST_BIGENDIAN + TIFFSwabArrayOfLong(raster, tile_width * tile_height); +#endif + + /* + * For some reason the TIFFReadRGBATile() function chooses the + * lower left corner as the origin. Vertically mirror scanlines. + */ + for( i_row = 0; i_row < tile_height / 2; i_row++ ) + { + uint32 *top_line, *bottom_line; + + top_line = raster + tile_width * i_row; + bottom_line = raster + tile_width * (tile_height-i_row-1); + + _TIFFmemcpy(wrk_line, top_line, 4*tile_width); + _TIFFmemcpy(top_line, bottom_line, 4*tile_width); + _TIFFmemcpy(bottom_line, wrk_line, 4*tile_width); + } + + /* + * Write out the result in a tile. + */ + + if( TIFFWriteEncodedTile( out, + TIFFComputeTile( out, col, row, 0, 0), + raster, + 4 * tile_width * tile_height ) == -1 ) + { + ok = 0; + break; + } + } + } + + _TIFFfree( raster ); + _TIFFfree( wrk_line ); + + return ok; +} + +static int +cvt_by_strip( TIFF *in, TIFF *out ) + +{ + uint32* raster; /* retrieve RGBA image */ + uint32 width, height; /* image width & height */ + uint32 row; + uint32 *wrk_line; + int ok = 1; + + TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &width); + TIFFGetField(in, TIFFTAG_IMAGELENGTH, &height); + + if( !TIFFGetField(in, TIFFTAG_ROWSPERSTRIP, &rowsperstrip) ) { + TIFFError(TIFFFileName(in), "Source image not in strips"); + return (0); + } + + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, rowsperstrip); + + /* + * Allocate strip buffer + */ + raster = (uint32*)_TIFFmalloc(width * rowsperstrip * sizeof (uint32)); + if (raster == 0) { + TIFFError(TIFFFileName(in), "No space for raster buffer"); + return (0); + } + + /* + * Allocate a scanline buffer for swapping during the vertical + * mirroring pass. + */ + wrk_line = (uint32*)_TIFFmalloc(width * sizeof (uint32)); + if (!wrk_line) { + TIFFError(TIFFFileName(in), "No space for raster scanline buffer"); + ok = 0; + } + + /* + * Loop over the strips. + */ + for( row = 0; ok && row < height; row += rowsperstrip ) + { + int rows_to_write, i_row; + + /* Read the strip into an RGBA array */ + if (!TIFFReadRGBAStrip(in, row, raster)) { + ok = 0; + break; + } + + /* + * XXX: raster array has 4-byte unsigned integer type, that is why + * we should rearrange it here. + */ +#if HOST_BIGENDIAN + TIFFSwabArrayOfLong(raster, width * rowsperstrip); +#endif + + /* + * Figure out the number of scanlines actually in this strip. + */ + if( row + rowsperstrip > height ) + rows_to_write = height - row; + else + rows_to_write = rowsperstrip; + + /* + * For some reason the TIFFReadRGBAStrip() function chooses the + * lower left corner as the origin. Vertically mirror scanlines. + */ + + for( i_row = 0; i_row < rows_to_write / 2; i_row++ ) + { + uint32 *top_line, *bottom_line; + + top_line = raster + width * i_row; + bottom_line = raster + width * (rows_to_write-i_row-1); + + _TIFFmemcpy(wrk_line, top_line, 4*width); + _TIFFmemcpy(top_line, bottom_line, 4*width); + _TIFFmemcpy(bottom_line, wrk_line, 4*width); + } + + /* + * Write out the result in a strip + */ + + if( TIFFWriteEncodedStrip( out, row / rowsperstrip, raster, + 4 * rows_to_write * width ) == -1 ) + { + ok = 0; + break; + } + } + + _TIFFfree( raster ); + _TIFFfree( wrk_line ); + + return ok; +} + +/* + * cvt_whole_image() + * + * read the whole image into one big RGBA buffer and then write out + * strips from that. This is using the traditional TIFFReadRGBAImage() + * API that we trust. + */ + +static int +cvt_whole_image( TIFF *in, TIFF *out ) + +{ + uint32* raster; /* retrieve RGBA image */ + uint32 width, height; /* image width & height */ + uint32 row; + size_t pixel_count; + + TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &width); + TIFFGetField(in, TIFFTAG_IMAGELENGTH, &height); + pixel_count = width * height; + + /* XXX: Check the integer overflow. */ + if (!width || !height || pixel_count / width != height) { + TIFFError(TIFFFileName(in), + "Malformed input file; can't allocate buffer for raster of %lux%lu size", + (unsigned long)width, (unsigned long)height); + return 0; + } + + rowsperstrip = TIFFDefaultStripSize(out, rowsperstrip); + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, rowsperstrip); + + raster = (uint32*)_TIFFCheckMalloc(in, pixel_count, sizeof(uint32), "raster buffer"); + if (raster == 0) { + TIFFError(TIFFFileName(in), "Failed to allocate buffer (%lu elements of %lu each)", + (unsigned long)pixel_count, (unsigned long)sizeof(uint32)); + return (0); + } + + /* Read the image in one chunk into an RGBA array */ + if (!TIFFReadRGBAImageOriented(in, width, height, raster, + ORIENTATION_TOPLEFT, 0)) { + _TIFFfree(raster); + return (0); + } + + /* + * XXX: raster array has 4-byte unsigned integer type, that is why + * we should rearrange it here. + */ +#if HOST_BIGENDIAN + TIFFSwabArrayOfLong(raster, width * height); +#endif + + /* + * Do we want to strip away alpha components? + */ + if (no_alpha) + { + size_t count = pixel_count; + unsigned char *src, *dst; + + src = dst = (unsigned char *) raster; + while (count > 0) + { + *(dst++) = *(src++); + *(dst++) = *(src++); + *(dst++) = *(src++); + src++; + count--; + } + } + + /* + * Write out the result in strips + */ + for (row = 0; row < height; row += rowsperstrip) + { + unsigned char * raster_strip; + int rows_to_write; + int bytes_per_pixel; + + if (no_alpha) + { + raster_strip = ((unsigned char *) raster) + 3 * row * width; + bytes_per_pixel = 3; + } + else + { + raster_strip = (unsigned char *) (raster + row * width); + bytes_per_pixel = 4; + } + + if( row + rowsperstrip > height ) + rows_to_write = height - row; + else + rows_to_write = rowsperstrip; + + if( TIFFWriteEncodedStrip( out, row / rowsperstrip, raster_strip, + bytes_per_pixel * rows_to_write * width ) == -1 ) + { + _TIFFfree( raster ); + return 0; + } + } + + _TIFFfree( raster ); + + return 1; +} + + +static int +tiffcvt(TIFF* in, TIFF* out) +{ + uint32 width, height; /* image width & height */ + uint16 shortv; + float floatv; + char *stringv; + uint32 longv; + uint16 v[1]; + + TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &width); + TIFFGetField(in, TIFFTAG_IMAGELENGTH, &height); + + CopyField(TIFFTAG_SUBFILETYPE, longv); + TIFFSetField(out, TIFFTAG_IMAGEWIDTH, width); + TIFFSetField(out, TIFFTAG_IMAGELENGTH, height); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, 8); + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_RGB); + + CopyField(TIFFTAG_FILLORDER, shortv); + TIFFSetField(out, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT); + + if( no_alpha ) + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, 3); + else + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, 4); + + if( !no_alpha ) + { + v[0] = EXTRASAMPLE_ASSOCALPHA; + TIFFSetField(out, TIFFTAG_EXTRASAMPLES, 1, v); + } + + CopyField(TIFFTAG_XRESOLUTION, floatv); + CopyField(TIFFTAG_YRESOLUTION, floatv); + CopyField(TIFFTAG_RESOLUTIONUNIT, shortv); + TIFFSetField(out, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + TIFFSetField(out, TIFFTAG_SOFTWARE, TIFFGetVersion()); + CopyField(TIFFTAG_DOCUMENTNAME, stringv); + + if( process_by_block && TIFFIsTiled( in ) ) + return( cvt_by_tile( in, out ) ); + else if( process_by_block ) + return( cvt_by_strip( in, out ) ); + else + return( cvt_whole_image( in, out ) ); +} + +static char* stuff[] = { + "usage: tiff2rgba [-c comp] [-r rows] [-b] [-n] [-8] input... output", + "where comp is one of the following compression algorithms:", + " jpeg\t\tJPEG encoding", + " zip\t\tLempel-Ziv & Welch encoding", + " lzw\t\tLempel-Ziv & Welch encoding", + " packbits\tPackBits encoding", + " none\t\tno compression", + "and the other options are:", + " -r\trows/strip", + " -b (progress by block rather than as a whole image)", + " -n don't emit alpha component.", + " -8 write BigTIFF file instead of ClassicTIFF", + NULL +}; + +static void +usage(int code) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(code); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiffcmp.c b/src/SDL2/external/tiff-4.0.3/tools/tiffcmp.c new file mode 100644 index 000000000..bc7dac941 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiffcmp.c @@ -0,0 +1,644 @@ +/* $Id: tiffcmp.c,v 1.16 2010-03-10 18:56:50 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +#ifndef HAVE_GETOPT +extern int getopt(int, char**, char*); +#endif + +static int stopondiff = 1; +static int stoponfirsttag = 1; +static uint16 bitspersample = 1; +static uint16 samplesperpixel = 1; +static uint16 sampleformat = SAMPLEFORMAT_UINT; +static uint32 imagewidth; +static uint32 imagelength; + +static void usage(void); +static int tiffcmp(TIFF*, TIFF*); +static int cmptags(TIFF*, TIFF*); +static int ContigCompare(int, uint32, unsigned char*, unsigned char*, tsize_t); +static int SeparateCompare(int, int, uint32, unsigned char*, unsigned char*); +static void PrintIntDiff(uint32, int, uint32, uint32, uint32); +static void PrintFloatDiff(uint32, int, uint32, double, double); + +static void leof(const char*, uint32, int); + +int +main(int argc, char* argv[]) +{ + TIFF *tif1, *tif2; + int c, dirnum; + extern int optind; + extern char* optarg; + + while ((c = getopt(argc, argv, "ltz:")) != -1) + switch (c) { + case 'l': + stopondiff = 0; + break; + case 'z': + stopondiff = atoi(optarg); + break; + case 't': + stoponfirsttag = 0; + break; + case '?': + usage(); + /*NOTREACHED*/ + } + if (argc - optind < 2) + usage(); + tif1 = TIFFOpen(argv[optind], "r"); + if (tif1 == NULL) + return (-1); + tif2 = TIFFOpen(argv[optind+1], "r"); + if (tif2 == NULL) + return (-2); + dirnum = 0; + while (tiffcmp(tif1, tif2)) { + if (!TIFFReadDirectory(tif1)) { + if (!TIFFReadDirectory(tif2)) + break; + printf("No more directories for %s\n", + TIFFFileName(tif1)); + return (1); + } else if (!TIFFReadDirectory(tif2)) { + printf("No more directories for %s\n", + TIFFFileName(tif2)); + return (1); + } + printf("Directory %d:\n", ++dirnum); + } + + TIFFClose(tif1); + TIFFClose(tif2); + return (0); +} + +char* stuff[] = { +"usage: tiffcmp [options] file1 file2", +"where options are:", +" -l list each byte of image data that differs between the files", +" -z # list specified number of bytes that differs between the files", +" -t ignore any differences in directory tags", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +#define checkEOF(tif, row, sample) { \ + leof(TIFFFileName(tif), row, sample); \ + goto bad; \ +} + +static int CheckShortTag(TIFF*, TIFF*, int, char*); +static int CheckShort2Tag(TIFF*, TIFF*, int, char*); +static int CheckShortArrayTag(TIFF*, TIFF*, int, char*); +static int CheckLongTag(TIFF*, TIFF*, int, char*); +static int CheckFloatTag(TIFF*, TIFF*, int, char*); +static int CheckStringTag(TIFF*, TIFF*, int, char*); + +static int +tiffcmp(TIFF* tif1, TIFF* tif2) +{ + uint16 config1, config2; + tsize_t size1; + uint32 row; + tsample_t s; + unsigned char *buf1, *buf2; + + if (!CheckShortTag(tif1, tif2, TIFFTAG_BITSPERSAMPLE, "BitsPerSample")) + return (0); + if (!CheckShortTag(tif1, tif2, TIFFTAG_SAMPLESPERPIXEL, "SamplesPerPixel")) + return (0); + if (!CheckLongTag(tif1, tif2, TIFFTAG_IMAGEWIDTH, "ImageWidth")) + return (0); + if (!cmptags(tif1, tif2)) + return (1); + (void) TIFFGetField(tif1, TIFFTAG_BITSPERSAMPLE, &bitspersample); + (void) TIFFGetField(tif1, TIFFTAG_SAMPLESPERPIXEL, &samplesperpixel); + (void) TIFFGetField(tif1, TIFFTAG_SAMPLEFORMAT, &sampleformat); + (void) TIFFGetField(tif1, TIFFTAG_IMAGEWIDTH, &imagewidth); + (void) TIFFGetField(tif1, TIFFTAG_IMAGELENGTH, &imagelength); + (void) TIFFGetField(tif1, TIFFTAG_PLANARCONFIG, &config1); + (void) TIFFGetField(tif2, TIFFTAG_PLANARCONFIG, &config2); + buf1 = (unsigned char *)_TIFFmalloc(size1 = TIFFScanlineSize(tif1)); + buf2 = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(tif2)); + if (buf1 == NULL || buf2 == NULL) { + fprintf(stderr, "No space for scanline buffers\n"); + exit(-1); + } + if (config1 != config2 && bitspersample != 8 && samplesperpixel > 1) { + fprintf(stderr, +"Can't handle different planar configuration w/ different bits/sample\n"); + goto bad; + } +#define pack(a,b) ((a)<<8)|(b) + switch (pack(config1, config2)) { + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG): + for (row = 0; row < imagelength; row++) { + if (TIFFReadScanline(tif2, buf2, row, 0) < 0) + checkEOF(tif2, row, -1) + for (s = 0; s < samplesperpixel; s++) { + if (TIFFReadScanline(tif1, buf1, row, s) < 0) + checkEOF(tif1, row, s) + if (SeparateCompare(1, s, row, buf2, buf1) < 0) + goto bad1; + } + } + break; + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE): + for (row = 0; row < imagelength; row++) { + if (TIFFReadScanline(tif1, buf1, row, 0) < 0) + checkEOF(tif1, row, -1) + for (s = 0; s < samplesperpixel; s++) { + if (TIFFReadScanline(tif2, buf2, row, s) < 0) + checkEOF(tif2, row, s) + if (SeparateCompare(0, s, row, buf1, buf2) < 0) + goto bad1; + } + } + break; + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE): + for (s = 0; s < samplesperpixel; s++) + for (row = 0; row < imagelength; row++) { + if (TIFFReadScanline(tif1, buf1, row, s) < 0) + checkEOF(tif1, row, s) + if (TIFFReadScanline(tif2, buf2, row, s) < 0) + checkEOF(tif2, row, s) + if (ContigCompare(s, row, buf1, buf2, size1) < 0) + goto bad1; + } + break; + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG): + for (row = 0; row < imagelength; row++) { + if (TIFFReadScanline(tif1, buf1, row, 0) < 0) + checkEOF(tif1, row, -1) + if (TIFFReadScanline(tif2, buf2, row, 0) < 0) + checkEOF(tif2, row, -1) + if (ContigCompare(-1, row, buf1, buf2, size1) < 0) + goto bad1; + } + break; + } + if (buf1) _TIFFfree(buf1); + if (buf2) _TIFFfree(buf2); + return (1); +bad: + if (stopondiff) + exit(1); +bad1: + if (buf1) _TIFFfree(buf1); + if (buf2) _TIFFfree(buf2); + return (0); +} + +#define CmpShortField(tag, name) \ + if (!CheckShortTag(tif1, tif2, tag, name) && stoponfirsttag) return (0) +#define CmpShortField2(tag, name) \ + if (!CheckShort2Tag(tif1, tif2, tag, name) && stoponfirsttag) return (0) +#define CmpLongField(tag, name) \ + if (!CheckLongTag(tif1, tif2, tag, name) && stoponfirsttag) return (0) +#define CmpFloatField(tag, name) \ + if (!CheckFloatTag(tif1, tif2, tag, name) && stoponfirsttag) return (0) +#define CmpStringField(tag, name) \ + if (!CheckStringTag(tif1, tif2, tag, name) && stoponfirsttag) return (0) +#define CmpShortArrayField(tag, name) \ + if (!CheckShortArrayTag(tif1, tif2, tag, name) && stoponfirsttag) return (0) + +static int +cmptags(TIFF* tif1, TIFF* tif2) +{ + CmpLongField(TIFFTAG_SUBFILETYPE, "SubFileType"); + CmpLongField(TIFFTAG_IMAGEWIDTH, "ImageWidth"); + CmpLongField(TIFFTAG_IMAGELENGTH, "ImageLength"); + CmpShortField(TIFFTAG_BITSPERSAMPLE, "BitsPerSample"); + CmpShortField(TIFFTAG_COMPRESSION, "Compression"); + CmpShortField(TIFFTAG_PREDICTOR, "Predictor"); + CmpShortField(TIFFTAG_PHOTOMETRIC, "PhotometricInterpretation"); + CmpShortField(TIFFTAG_THRESHHOLDING, "Thresholding"); + CmpShortField(TIFFTAG_FILLORDER, "FillOrder"); + CmpShortField(TIFFTAG_ORIENTATION, "Orientation"); + CmpShortField(TIFFTAG_SAMPLESPERPIXEL, "SamplesPerPixel"); + CmpShortField(TIFFTAG_MINSAMPLEVALUE, "MinSampleValue"); + CmpShortField(TIFFTAG_MAXSAMPLEVALUE, "MaxSampleValue"); + CmpShortField(TIFFTAG_SAMPLEFORMAT, "SampleFormat"); + CmpFloatField(TIFFTAG_XRESOLUTION, "XResolution"); + CmpFloatField(TIFFTAG_YRESOLUTION, "YResolution"); + CmpLongField(TIFFTAG_GROUP3OPTIONS, "Group3Options"); + CmpLongField(TIFFTAG_GROUP4OPTIONS, "Group4Options"); + CmpShortField(TIFFTAG_RESOLUTIONUNIT, "ResolutionUnit"); + CmpShortField(TIFFTAG_PLANARCONFIG, "PlanarConfiguration"); + CmpLongField(TIFFTAG_ROWSPERSTRIP, "RowsPerStrip"); + CmpFloatField(TIFFTAG_XPOSITION, "XPosition"); + CmpFloatField(TIFFTAG_YPOSITION, "YPosition"); + CmpShortField(TIFFTAG_GRAYRESPONSEUNIT, "GrayResponseUnit"); + CmpShortField(TIFFTAG_COLORRESPONSEUNIT, "ColorResponseUnit"); +#ifdef notdef + { uint16 *graycurve; + CmpField(TIFFTAG_GRAYRESPONSECURVE, graycurve); + } + { uint16 *red, *green, *blue; + CmpField3(TIFFTAG_COLORRESPONSECURVE, red, green, blue); + } + { uint16 *red, *green, *blue; + CmpField3(TIFFTAG_COLORMAP, red, green, blue); + } +#endif + CmpShortField2(TIFFTAG_PAGENUMBER, "PageNumber"); + CmpStringField(TIFFTAG_ARTIST, "Artist"); + CmpStringField(TIFFTAG_IMAGEDESCRIPTION,"ImageDescription"); + CmpStringField(TIFFTAG_MAKE, "Make"); + CmpStringField(TIFFTAG_MODEL, "Model"); + CmpStringField(TIFFTAG_SOFTWARE, "Software"); + CmpStringField(TIFFTAG_DATETIME, "DateTime"); + CmpStringField(TIFFTAG_HOSTCOMPUTER, "HostComputer"); + CmpStringField(TIFFTAG_PAGENAME, "PageName"); + CmpStringField(TIFFTAG_DOCUMENTNAME, "DocumentName"); + CmpShortField(TIFFTAG_MATTEING, "Matteing"); + CmpShortArrayField(TIFFTAG_EXTRASAMPLES,"ExtraSamples"); + return (1); +} + +static int +ContigCompare(int sample, uint32 row, + unsigned char* p1, unsigned char* p2, tsize_t size) +{ + uint32 pix; + int ppb = 8 / bitspersample; + int samples_to_test; + + if (memcmp(p1, p2, size) == 0) + return 0; + + samples_to_test = (sample == -1) ? samplesperpixel : 1; + + switch (bitspersample) { + case 1: case 2: case 4: case 8: + { + unsigned char *pix1 = p1, *pix2 = p2; + + for (pix = 0; pix < imagewidth; pix += ppb) { + int s; + + for(s = 0; s < samples_to_test; s++) { + if (*pix1 != *pix2) { + if( sample == -1 ) + PrintIntDiff(row, s, pix, *pix1, *pix2); + else + PrintIntDiff(row, sample, pix, *pix1, *pix2); + } + + pix1++; + pix2++; + } + } + break; + } + case 16: + { + uint16 *pix1 = (uint16 *)p1, *pix2 = (uint16 *)p2; + + for (pix = 0; pix < imagewidth; pix++) { + int s; + + for(s = 0; s < samples_to_test; s++) { + if (*pix1 != *pix2) + PrintIntDiff(row, sample, pix, *pix1, *pix2); + + pix1++; + pix2++; + } + } + break; + } + case 32: + if (sampleformat == SAMPLEFORMAT_UINT + || sampleformat == SAMPLEFORMAT_INT) { + uint32 *pix1 = (uint32 *)p1, *pix2 = (uint32 *)p2; + + for (pix = 0; pix < imagewidth; pix++) { + int s; + + for(s = 0; s < samples_to_test; s++) { + if (*pix1 != *pix2) { + PrintIntDiff(row, sample, pix, + *pix1, *pix2); + } + + pix1++; + pix2++; + } + } + } else if (sampleformat == SAMPLEFORMAT_IEEEFP) { + float *pix1 = (float *)p1, *pix2 = (float *)p2; + + for (pix = 0; pix < imagewidth; pix++) { + int s; + + for(s = 0; s < samples_to_test; s++) { + if (fabs(*pix1 - *pix2) < 0.000000000001) { + PrintFloatDiff(row, sample, pix, + *pix1, *pix2); + } + + pix1++; + pix2++; + } + } + } else { + fprintf(stderr, "Sample format %d is not supported.\n", + sampleformat); + return -1; + } + break; + default: + fprintf(stderr, "Bit depth %d is not supported.\n", bitspersample); + return -1; + } + + return 0; +} + +static void +PrintIntDiff(uint32 row, int sample, uint32 pix, uint32 w1, uint32 w2) +{ + if (sample < 0) + sample = 0; + switch (bitspersample) { + case 1: + case 2: + case 4: + { + int32 mask1, mask2, s; + + mask1 = ~((-1) << bitspersample); + s = (8 - bitspersample); + mask2 = mask1 << s; + for (; mask2 && pix < imagewidth; + mask2 >>= bitspersample, s -= bitspersample, pix++) { + if ((w1 & mask2) ^ (w2 & mask2)) { + printf( + "Scanline %lu, pixel %lu, sample %d: %01x %01x\n", + (unsigned long) row, + (unsigned long) pix, + sample, + (unsigned int)((w1 >> s) & mask1), + (unsigned int)((w2 >> s) & mask1)); + if (--stopondiff == 0) + exit(1); + } + } + break; + } + case 8: + printf("Scanline %lu, pixel %lu, sample %d: %02x %02x\n", + (unsigned long) row, (unsigned long) pix, sample, + (unsigned int) w1, (unsigned int) w2); + if (--stopondiff == 0) + exit(1); + break; + case 16: + printf("Scanline %lu, pixel %lu, sample %d: %04x %04x\n", + (unsigned long) row, (unsigned long) pix, sample, + (unsigned int) w1, (unsigned int) w2); + if (--stopondiff == 0) + exit(1); + break; + case 32: + printf("Scanline %lu, pixel %lu, sample %d: %08x %08x\n", + (unsigned long) row, (unsigned long) pix, sample, + (unsigned int) w1, (unsigned int) w2); + if (--stopondiff == 0) + exit(1); + break; + default: + break; + } +} + +static void +PrintFloatDiff(uint32 row, int sample, uint32 pix, double w1, double w2) +{ + if (sample < 0) + sample = 0; + switch (bitspersample) { + case 32: + printf("Scanline %lu, pixel %lu, sample %d: %g %g\n", + (long) row, (long) pix, sample, w1, w2); + if (--stopondiff == 0) + exit(1); + break; + default: + break; + } +} + +static int +SeparateCompare(int reversed, int sample, uint32 row, + unsigned char* cp1, unsigned char* p2) +{ + uint32 npixels = imagewidth; + int pixel; + + cp1 += sample; + for (pixel = 0; npixels-- > 0; pixel++, cp1 += samplesperpixel, p2++) { + if (*cp1 != *p2) { + printf("Scanline %lu, pixel %lu, sample %ld: ", + (long) row, (long) pixel, (long) sample); + if (reversed) + printf("%02x %02x\n", *p2, *cp1); + else + printf("%02x %02x\n", *cp1, *p2); + if (--stopondiff == 0) + exit(1); + } + } + + return 0; +} + +static int +checkTag(TIFF* tif1, TIFF* tif2, int tag, char* name, void* p1, void* p2) +{ + + if (TIFFGetField(tif1, tag, p1)) { + if (!TIFFGetField(tif2, tag, p2)) { + printf("%s tag appears only in %s\n", + name, TIFFFileName(tif1)); + return (0); + } + return (1); + } else if (TIFFGetField(tif2, tag, p2)) { + printf("%s tag appears only in %s\n", name, TIFFFileName(tif2)); + return (0); + } + return (-1); +} + +#define CHECK(cmp, fmt) { \ + switch (checkTag(tif1,tif2,tag,name,&v1,&v2)) { \ + case 1: if (cmp) \ + case -1: return (1); \ + printf(fmt, name, v1, v2); \ + } \ + return (0); \ +} + +static int +CheckShortTag(TIFF* tif1, TIFF* tif2, int tag, char* name) +{ + uint16 v1, v2; + CHECK(v1 == v2, "%s: %u %u\n"); +} + +static int +CheckShort2Tag(TIFF* tif1, TIFF* tif2, int tag, char* name) +{ + uint16 v11, v12, v21, v22; + + if (TIFFGetField(tif1, tag, &v11, &v12)) { + if (!TIFFGetField(tif2, tag, &v21, &v22)) { + printf("%s tag appears only in %s\n", + name, TIFFFileName(tif1)); + return (0); + } + if (v11 == v21 && v12 == v22) + return (1); + printf("%s: <%u,%u> <%u,%u>\n", name, v11, v12, v21, v22); + } else if (TIFFGetField(tif2, tag, &v21, &v22)) + printf("%s tag appears only in %s\n", name, TIFFFileName(tif2)); + else + return (1); + return (0); +} + +static int +CheckShortArrayTag(TIFF* tif1, TIFF* tif2, int tag, char* name) +{ + uint16 n1, *a1; + uint16 n2, *a2; + + if (TIFFGetField(tif1, tag, &n1, &a1)) { + if (!TIFFGetField(tif2, tag, &n2, &a2)) { + printf("%s tag appears only in %s\n", + name, TIFFFileName(tif1)); + return (0); + } + if (n1 == n2) { + char* sep; + uint16 i; + + if (memcmp(a1, a2, n1 * sizeof(uint16)) == 0) + return (1); + printf("%s: value mismatch, <%u:", name, n1); + sep = ""; + for (i = 0; i < n1; i++) + printf("%s%u", sep, a1[i]), sep = ","; + printf("> and <%u: ", n2); + sep = ""; + for (i = 0; i < n2; i++) + printf("%s%u", sep, a2[i]), sep = ","; + printf(">\n"); + } else + printf("%s: %u items in %s, %u items in %s", name, + n1, TIFFFileName(tif1), + n2, TIFFFileName(tif2) + ); + } else if (TIFFGetField(tif2, tag, &n2, &a2)) + printf("%s tag appears only in %s\n", name, TIFFFileName(tif2)); + else + return (1); + return (0); +} + +static int +CheckLongTag(TIFF* tif1, TIFF* tif2, int tag, char* name) +{ + uint32 v1, v2; + CHECK(v1 == v2, "%s: %u %u\n"); +} + +static int +CheckFloatTag(TIFF* tif1, TIFF* tif2, int tag, char* name) +{ + float v1, v2; + CHECK(v1 == v2, "%s: %g %g\n"); +} + +static int +CheckStringTag(TIFF* tif1, TIFF* tif2, int tag, char* name) +{ + char *v1, *v2; + CHECK(strcmp(v1, v2) == 0, "%s: \"%s\" \"%s\"\n"); +} + +static void +leof(const char* name, uint32 row, int s) +{ + + printf("%s: EOF at scanline %lu", name, (unsigned long)row); + if (s >= 0) + printf(", sample %d", s); + printf("\n"); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiffcp.c b/src/SDL2/external/tiff-4.0.3/tools/tiffcp.c new file mode 100644 index 000000000..0f81b19d4 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiffcp.c @@ -0,0 +1,1860 @@ +/* $Id: tiffcp.c,v 1.49 2010-12-23 13:38:47 dron Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Revised: 2/18/01 BAR -- added syntax for extracting single images from + * multi-image TIFF files. + * + * New syntax is: sourceFileName,image# + * + * image# ranges from 0.. where n is the # of images in the file. + * There may be no white space between the comma and the filename or + * image number. + * + * Example: tiffcp source.tif,1 destination.tif + * + * Copies the 2nd image in source.tif to the destination. + * + ***** + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include + +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#include "tiffio.h" + +#ifndef HAVE_GETOPT +extern int getopt(int, char**, char*); +#endif + +#if defined(VMS) +# define unlink delete +#endif + +#define streq(a,b) (strcmp(a,b) == 0) +#define strneq(a,b,n) (strncmp(a,b,n) == 0) + +#define TRUE 1 +#define FALSE 0 + +static int outtiled = -1; +static uint32 tilewidth; +static uint32 tilelength; + +static uint16 config; +static uint16 compression; +static uint16 predictor; +static int preset; +static uint16 fillorder; +static uint16 orientation; +static uint32 rowsperstrip; +static uint32 g3opts; +static int ignore = FALSE; /* if true, ignore read errors */ +static uint32 defg3opts = (uint32) -1; +static int quality = 75; /* JPEG quality */ +static int jpegcolormode = JPEGCOLORMODE_RGB; +static uint16 defcompression = (uint16) -1; +static uint16 defpredictor = (uint16) -1; +static int defpreset = -1; + +static int tiffcp(TIFF*, TIFF*); +static int processCompressOptions(char*); +static void usage(void); + +static char comma = ','; /* (default) comma separator character */ +static TIFF* bias = NULL; +static int pageNum = 0; +static int pageInSeq = 0; + +static int nextSrcImage (TIFF *tif, char **imageSpec) +/* + seek to the next image specified in *imageSpec + returns 1 if success, 0 if no more images to process + *imageSpec=NULL if subsequent images should be processed in sequence +*/ +{ + if (**imageSpec == comma) { /* if not @comma, we've done all images */ + char *start = *imageSpec + 1; + tdir_t nextImage = (tdir_t)strtol(start, imageSpec, 0); + if (start == *imageSpec) nextImage = TIFFCurrentDirectory (tif); + if (**imageSpec) + { + if (**imageSpec == comma) { + /* a trailing comma denotes remaining images in sequence */ + if ((*imageSpec)[1] == '\0') *imageSpec = NULL; + }else{ + fprintf (stderr, + "Expected a %c separated image # list after %s\n", + comma, TIFFFileName (tif)); + exit (-4); /* syntax error */ + } + } + if (TIFFSetDirectory (tif, nextImage)) return 1; + fprintf (stderr, "%s%c%d not found!\n", + TIFFFileName(tif), comma, (int) nextImage); + } + return 0; +} + + +static TIFF* openSrcImage (char **imageSpec) +/* + imageSpec points to a pointer to a filename followed by optional ,image#'s + Open the TIFF file and assign *imageSpec to either NULL if there are + no images specified, or a pointer to the next image number text +*/ +{ + TIFF *tif; + char *fn = *imageSpec; + *imageSpec = strchr (fn, comma); + if (*imageSpec) { /* there is at least one image number specifier */ + **imageSpec = '\0'; + tif = TIFFOpen (fn, "r"); + /* but, ignore any single trailing comma */ + if (!(*imageSpec)[1]) {*imageSpec = NULL; return tif;} + if (tif) { + **imageSpec = comma; /* replace the comma */ + if (!nextSrcImage(tif, imageSpec)) { + TIFFClose (tif); + tif = NULL; + } + } + }else + tif = TIFFOpen (fn, "r"); + return tif; +} + +int +main(int argc, char* argv[]) +{ + uint16 defconfig = (uint16) -1; + uint16 deffillorder = 0; + uint32 deftilewidth = (uint32) -1; + uint32 deftilelength = (uint32) -1; + uint32 defrowsperstrip = (uint32) 0; + uint64 diroff = 0; + TIFF* in; + TIFF* out; + char mode[10]; + char* mp = mode; + int c; + extern int optind; + extern char* optarg; + + *mp++ = 'w'; + *mp = '\0'; + while ((c = getopt(argc, argv, ",:b:c:f:l:o:z:p:r:w:aistBLMC8x")) != -1) + switch (c) { + case ',': + if (optarg[0] != '=') usage(); + comma = optarg[1]; + break; + case 'b': /* this file is bias image subtracted from others */ + if (bias) { + fputs ("Only 1 bias image may be specified\n", stderr); + exit (-2); + } + { + uint16 samples = (uint16) -1; + char **biasFn = &optarg; + bias = openSrcImage (biasFn); + if (!bias) exit (-5); + if (TIFFIsTiled (bias)) { + fputs ("Bias image must be organized in strips\n", stderr); + exit (-7); + } + TIFFGetField(bias, TIFFTAG_SAMPLESPERPIXEL, &samples); + if (samples != 1) { + fputs ("Bias image must be monochrome\n", stderr); + exit (-7); + } + } + break; + case 'a': /* append to output */ + mode[0] = 'a'; + break; + case 'c': /* compression scheme */ + if (!processCompressOptions(optarg)) + usage(); + break; + case 'f': /* fill order */ + if (streq(optarg, "lsb2msb")) + deffillorder = FILLORDER_LSB2MSB; + else if (streq(optarg, "msb2lsb")) + deffillorder = FILLORDER_MSB2LSB; + else + usage(); + break; + case 'i': /* ignore errors */ + ignore = TRUE; + break; + case 'l': /* tile length */ + outtiled = TRUE; + deftilelength = atoi(optarg); + break; + case 'o': /* initial directory offset */ + diroff = strtoul(optarg, NULL, 0); + break; + case 'p': /* planar configuration */ + if (streq(optarg, "separate")) + defconfig = PLANARCONFIG_SEPARATE; + else if (streq(optarg, "contig")) + defconfig = PLANARCONFIG_CONTIG; + else + usage(); + break; + case 'r': /* rows/strip */ + defrowsperstrip = atol(optarg); + break; + case 's': /* generate stripped output */ + outtiled = FALSE; + break; + case 't': /* generate tiled output */ + outtiled = TRUE; + break; + case 'w': /* tile width */ + outtiled = TRUE; + deftilewidth = atoi(optarg); + break; + case 'B': + *mp++ = 'b'; *mp = '\0'; + break; + case 'L': + *mp++ = 'l'; *mp = '\0'; + break; + case 'M': + *mp++ = 'm'; *mp = '\0'; + break; + case 'C': + *mp++ = 'c'; *mp = '\0'; + break; + case '8': + *mp++ = '8'; *mp = '\0'; + break; + case 'x': + pageInSeq = 1; + break; + case '?': + usage(); + /*NOTREACHED*/ + } + if (argc - optind < 2) + usage(); + out = TIFFOpen(argv[argc-1], mode); + if (out == NULL) + return (-2); + if ((argc - optind) == 2) + pageNum = -1; + for (; optind < argc-1 ; optind++) { + char *imageCursor = argv[optind]; + in = openSrcImage (&imageCursor); + if (in == NULL) { + (void) TIFFClose(out); + return (-3); + } + if (diroff != 0 && !TIFFSetSubDirectory(in, diroff)) { + TIFFError(TIFFFileName(in), + "Error, setting subdirectory at " TIFF_UINT64_FORMAT, diroff); + (void) TIFFClose(in); + (void) TIFFClose(out); + return (1); + } + for (;;) { + config = defconfig; + compression = defcompression; + predictor = defpredictor; + preset = defpreset; + fillorder = deffillorder; + rowsperstrip = defrowsperstrip; + tilewidth = deftilewidth; + tilelength = deftilelength; + g3opts = defg3opts; + if (!tiffcp(in, out) || !TIFFWriteDirectory(out)) { + (void) TIFFClose(in); + (void) TIFFClose(out); + return (1); + } + if (imageCursor) { /* seek next image directory */ + if (!nextSrcImage(in, &imageCursor)) break; + }else + if (!TIFFReadDirectory(in)) break; + } + (void) TIFFClose(in); + } + + (void) TIFFClose(out); + return (0); +} + +static void +processZIPOptions(char* cp) +{ + if ( (cp = strchr(cp, ':')) ) { + do { + cp++; + if (isdigit((int)*cp)) + defpredictor = atoi(cp); + else if (*cp == 'p') + defpreset = atoi(++cp); + else + usage(); + } while( (cp = strchr(cp, ':')) ); + } +} + +static void +processG3Options(char* cp) +{ + if( (cp = strchr(cp, ':')) ) { + if (defg3opts == (uint32) -1) + defg3opts = 0; + do { + cp++; + if (strneq(cp, "1d", 2)) + defg3opts &= ~GROUP3OPT_2DENCODING; + else if (strneq(cp, "2d", 2)) + defg3opts |= GROUP3OPT_2DENCODING; + else if (strneq(cp, "fill", 4)) + defg3opts |= GROUP3OPT_FILLBITS; + else + usage(); + } while( (cp = strchr(cp, ':')) ); + } +} + +static int +processCompressOptions(char* opt) +{ + if (streq(opt, "none")) { + defcompression = COMPRESSION_NONE; + } else if (streq(opt, "packbits")) { + defcompression = COMPRESSION_PACKBITS; + } else if (strneq(opt, "jpeg", 4)) { + char* cp = strchr(opt, ':'); + + defcompression = COMPRESSION_JPEG; + while( cp ) + { + if (isdigit((int)cp[1])) + quality = atoi(cp+1); + else if (cp[1] == 'r' ) + jpegcolormode = JPEGCOLORMODE_RAW; + else + usage(); + + cp = strchr(cp+1,':'); + } + } else if (strneq(opt, "g3", 2)) { + processG3Options(opt); + defcompression = COMPRESSION_CCITTFAX3; + } else if (streq(opt, "g4")) { + defcompression = COMPRESSION_CCITTFAX4; + } else if (strneq(opt, "lzw", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + defpredictor = atoi(cp+1); + defcompression = COMPRESSION_LZW; + } else if (strneq(opt, "zip", 3)) { + processZIPOptions(opt); + defcompression = COMPRESSION_ADOBE_DEFLATE; + } else if (strneq(opt, "lzma", 4)) { + processZIPOptions(opt); + defcompression = COMPRESSION_LZMA; + } else if (strneq(opt, "jbig", 4)) { + defcompression = COMPRESSION_JBIG; + } else if (strneq(opt, "sgilog", 6)) { + defcompression = COMPRESSION_SGILOG; + } else + return (0); + return (1); +} + +char* stuff[] = { +"usage: tiffcp [options] input... output", +"where options are:", +" -a append to output instead of overwriting", +" -o offset set initial directory offset", +" -p contig pack samples contiguously (e.g. RGBRGB...)", +" -p separate store samples separately (e.g. RRR...GGG...BBB...)", +" -s write output in strips", +" -t write output in tiles", +" -8 write BigTIFF instead of default ClassicTIFF", +" -i ignore read errors", +" -b file[,#] bias (dark) monochrome image to be subtracted from all others", +" -,=% use % rather than , to separate image #'s (per Note below)", +"", +" -r # make each strip have no more than # rows", +" -w # set output tile width (pixels)", +" -l # set output tile length (pixels)", +"", +" -f lsb2msb force lsb-to-msb FillOrder for output", +" -f msb2lsb force msb-to-lsb FillOrder for output", +"", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] compress output with deflate encoding", +" -c lzma[:opts] compress output with LZMA2 encoding", +" -c jpeg[:opts] compress output with JPEG encoding", +" -c jbig compress output with ISO JBIG encoding", +" -c packbits compress output with packbits encoding", +" -c g3[:opts] compress output with CCITT Group 3 encoding", +" -c g4 compress output with CCITT Group 4 encoding", +" -c sgilog compress output with SGILOG encoding", +" -c none use no compression algorithm on output", +" -x force the merged tiff pages in sequence", +"", +"Group 3 options:", +" 1d use default CCITT Group 3 1D-encoding", +" 2d use optional CCITT Group 3 2D-encoding", +" fill byte-align EOL codes", +"For example, -c g3:2d:fill to get G3-2D-encoded data with byte-aligned EOLs", +"", +"JPEG options:", +" # set compression quality level (0-100, default 75)", +" r output color image as RGB rather than YCbCr", +"For example, -c jpeg:r:50 to get JPEG-encoded RGB data with 50% comp. quality", +"", +"LZW, Deflate (ZIP) and LZMA2 options:", +" # set predictor value", +" p# set compression level (preset)", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing,", +"-c zip:3:p9 for Deflate encoding with maximum compression level and floating", +"point predictor.", +"", +"Note that input filenames may be of the form filename,x,y,z", +"where x, y, and z specify image numbers in the filename to copy.", +"example: tiffcp -c none -b esp.tif,1 esp.tif,0 test.tif", +" subtract 2nd image in esp.tif from 1st yielding uncompressed result test.tif", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +#define CopyField(tag, v) \ + if (TIFFGetField(in, tag, &v)) TIFFSetField(out, tag, v) +#define CopyField2(tag, v1, v2) \ + if (TIFFGetField(in, tag, &v1, &v2)) TIFFSetField(out, tag, v1, v2) +#define CopyField3(tag, v1, v2, v3) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3)) TIFFSetField(out, tag, v1, v2, v3) +#define CopyField4(tag, v1, v2, v3, v4) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3, &v4)) TIFFSetField(out, tag, v1, v2, v3, v4) + +static void +cpTag(TIFF* in, TIFF* out, uint16 tag, uint16 count, TIFFDataType type) +{ + switch (type) { + case TIFF_SHORT: + if (count == 1) { + uint16 shortv; + CopyField(tag, shortv); + } else if (count == 2) { + uint16 shortv1, shortv2; + CopyField2(tag, shortv1, shortv2); + } else if (count == 4) { + uint16 *tr, *tg, *tb, *ta; + CopyField4(tag, tr, tg, tb, ta); + } else if (count == (uint16) -1) { + uint16 shortv1; + uint16* shortav; + CopyField2(tag, shortv1, shortav); + } + break; + case TIFF_LONG: + { uint32 longv; + CopyField(tag, longv); + } + break; + case TIFF_RATIONAL: + if (count == 1) { + float floatv; + CopyField(tag, floatv); + } else if (count == (uint16) -1) { + float* floatav; + CopyField(tag, floatav); + } + break; + case TIFF_ASCII: + { char* stringv; + CopyField(tag, stringv); + } + break; + case TIFF_DOUBLE: + if (count == 1) { + double doublev; + CopyField(tag, doublev); + } else if (count == (uint16) -1) { + double* doubleav; + CopyField(tag, doubleav); + } + break; + default: + TIFFError(TIFFFileName(in), + "Data type %d is not supported, tag %d skipped.", + tag, type); + } +} + +static struct cpTag { + uint16 tag; + uint16 count; + TIFFDataType type; +} tags[] = { + { TIFFTAG_SUBFILETYPE, 1, TIFF_LONG }, + { TIFFTAG_THRESHHOLDING, 1, TIFF_SHORT }, + { TIFFTAG_DOCUMENTNAME, 1, TIFF_ASCII }, + { TIFFTAG_IMAGEDESCRIPTION, 1, TIFF_ASCII }, + { TIFFTAG_MAKE, 1, TIFF_ASCII }, + { TIFFTAG_MODEL, 1, TIFF_ASCII }, + { TIFFTAG_MINSAMPLEVALUE, 1, TIFF_SHORT }, + { TIFFTAG_MAXSAMPLEVALUE, 1, TIFF_SHORT }, + { TIFFTAG_XRESOLUTION, 1, TIFF_RATIONAL }, + { TIFFTAG_YRESOLUTION, 1, TIFF_RATIONAL }, + { TIFFTAG_PAGENAME, 1, TIFF_ASCII }, + { TIFFTAG_XPOSITION, 1, TIFF_RATIONAL }, + { TIFFTAG_YPOSITION, 1, TIFF_RATIONAL }, + { TIFFTAG_RESOLUTIONUNIT, 1, TIFF_SHORT }, + { TIFFTAG_SOFTWARE, 1, TIFF_ASCII }, + { TIFFTAG_DATETIME, 1, TIFF_ASCII }, + { TIFFTAG_ARTIST, 1, TIFF_ASCII }, + { TIFFTAG_HOSTCOMPUTER, 1, TIFF_ASCII }, + { TIFFTAG_WHITEPOINT, (uint16) -1, TIFF_RATIONAL }, + { TIFFTAG_PRIMARYCHROMATICITIES,(uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_HALFTONEHINTS, 2, TIFF_SHORT }, + { TIFFTAG_INKSET, 1, TIFF_SHORT }, + { TIFFTAG_DOTRANGE, 2, TIFF_SHORT }, + { TIFFTAG_TARGETPRINTER, 1, TIFF_ASCII }, + { TIFFTAG_SAMPLEFORMAT, 1, TIFF_SHORT }, + { TIFFTAG_YCBCRCOEFFICIENTS, (uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_YCBCRSUBSAMPLING, 2, TIFF_SHORT }, + { TIFFTAG_YCBCRPOSITIONING, 1, TIFF_SHORT }, + { TIFFTAG_REFERENCEBLACKWHITE, (uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_EXTRASAMPLES, (uint16) -1, TIFF_SHORT }, + { TIFFTAG_SMINSAMPLEVALUE, 1, TIFF_DOUBLE }, + { TIFFTAG_SMAXSAMPLEVALUE, 1, TIFF_DOUBLE }, + { TIFFTAG_STONITS, 1, TIFF_DOUBLE }, +}; +#define NTAGS (sizeof (tags) / sizeof (tags[0])) + +#define CopyTag(tag, count, type) cpTag(in, out, tag, count, type) + +typedef int (*copyFunc) + (TIFF* in, TIFF* out, uint32 l, uint32 w, uint16 samplesperpixel); +static copyFunc pickCopyFunc(TIFF*, TIFF*, uint16, uint16); + +/* PODD */ + +static int +tiffcp(TIFF* in, TIFF* out) +{ + uint16 bitspersample, samplesperpixel; + uint16 input_compression, input_photometric; + copyFunc cf; + uint32 width, length; + struct cpTag* p; + + CopyField(TIFFTAG_IMAGEWIDTH, width); + CopyField(TIFFTAG_IMAGELENGTH, length); + CopyField(TIFFTAG_BITSPERSAMPLE, bitspersample); + CopyField(TIFFTAG_SAMPLESPERPIXEL, samplesperpixel); + if (compression != (uint16)-1) + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + else + CopyField(TIFFTAG_COMPRESSION, compression); + TIFFGetFieldDefaulted(in, TIFFTAG_COMPRESSION, &input_compression); + TIFFGetFieldDefaulted(in, TIFFTAG_PHOTOMETRIC, &input_photometric); + if (input_compression == COMPRESSION_JPEG) { + /* Force conversion to RGB */ + TIFFSetField(in, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RGB); + } else if (input_photometric == PHOTOMETRIC_YCBCR) { + /* Otherwise, can't handle subsampled input */ + uint16 subsamplinghor,subsamplingver; + + TIFFGetFieldDefaulted(in, TIFFTAG_YCBCRSUBSAMPLING, + &subsamplinghor, &subsamplingver); + if (subsamplinghor!=1 || subsamplingver!=1) { + fprintf(stderr, "tiffcp: %s: Can't copy/convert subsampled image.\n", + TIFFFileName(in)); + return FALSE; + } + } + if (compression == COMPRESSION_JPEG) { + if (input_photometric == PHOTOMETRIC_RGB && + jpegcolormode == JPEGCOLORMODE_RGB) + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_YCBCR); + else + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, input_photometric); + } + else if (compression == COMPRESSION_SGILOG + || compression == COMPRESSION_SGILOG24) + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, + samplesperpixel == 1 ? + PHOTOMETRIC_LOGL : PHOTOMETRIC_LOGLUV); + else + CopyTag(TIFFTAG_PHOTOMETRIC, 1, TIFF_SHORT); + if (fillorder != 0) + TIFFSetField(out, TIFFTAG_FILLORDER, fillorder); + else + CopyTag(TIFFTAG_FILLORDER, 1, TIFF_SHORT); + /* + * Will copy `Orientation' tag from input image + */ + TIFFGetFieldDefaulted(in, TIFFTAG_ORIENTATION, &orientation); + switch (orientation) { + case ORIENTATION_BOTRIGHT: + case ORIENTATION_RIGHTBOT: /* XXX */ + TIFFWarning(TIFFFileName(in), "using bottom-left orientation"); + orientation = ORIENTATION_BOTLEFT; + /* fall thru... */ + case ORIENTATION_LEFTBOT: /* XXX */ + case ORIENTATION_BOTLEFT: + break; + case ORIENTATION_TOPRIGHT: + case ORIENTATION_RIGHTTOP: /* XXX */ + default: + TIFFWarning(TIFFFileName(in), "using top-left orientation"); + orientation = ORIENTATION_TOPLEFT; + /* fall thru... */ + case ORIENTATION_LEFTTOP: /* XXX */ + case ORIENTATION_TOPLEFT: + break; + } + TIFFSetField(out, TIFFTAG_ORIENTATION, orientation); + /* + * Choose tiles/strip for the output image according to + * the command line arguments (-tiles, -strips) and the + * structure of the input image. + */ + if (outtiled == -1) + outtiled = TIFFIsTiled(in); + if (outtiled) { + /* + * Setup output file's tile width&height. If either + * is not specified, use either the value from the + * input image or, if nothing is defined, use the + * library default. + */ + if (tilewidth == (uint32) -1) + TIFFGetField(in, TIFFTAG_TILEWIDTH, &tilewidth); + if (tilelength == (uint32) -1) + TIFFGetField(in, TIFFTAG_TILELENGTH, &tilelength); + TIFFDefaultTileSize(out, &tilewidth, &tilelength); + TIFFSetField(out, TIFFTAG_TILEWIDTH, tilewidth); + TIFFSetField(out, TIFFTAG_TILELENGTH, tilelength); + } else { + /* + * RowsPerStrip is left unspecified: use either the + * value from the input image or, if nothing is defined, + * use the library default. + */ + if (rowsperstrip == (uint32) 0) { + if (!TIFFGetField(in, TIFFTAG_ROWSPERSTRIP, + &rowsperstrip)) { + rowsperstrip = + TIFFDefaultStripSize(out, rowsperstrip); + } + if (rowsperstrip > length && rowsperstrip != (uint32)-1) + rowsperstrip = length; + } + else if (rowsperstrip == (uint32) -1) + rowsperstrip = length; + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, rowsperstrip); + } + if (config != (uint16) -1) + TIFFSetField(out, TIFFTAG_PLANARCONFIG, config); + else + CopyField(TIFFTAG_PLANARCONFIG, config); + if (samplesperpixel <= 4) + CopyTag(TIFFTAG_TRANSFERFUNCTION, 4, TIFF_SHORT); + CopyTag(TIFFTAG_COLORMAP, 4, TIFF_SHORT); +/* SMinSampleValue & SMaxSampleValue */ + switch (compression) { + case COMPRESSION_JPEG: + TIFFSetField(out, TIFFTAG_JPEGQUALITY, quality); + TIFFSetField(out, TIFFTAG_JPEGCOLORMODE, jpegcolormode); + break; + case COMPRESSION_JBIG: + CopyTag(TIFFTAG_FAXRECVPARAMS, 1, TIFF_LONG); + CopyTag(TIFFTAG_FAXRECVTIME, 1, TIFF_LONG); + CopyTag(TIFFTAG_FAXSUBADDRESS, 1, TIFF_ASCII); + CopyTag(TIFFTAG_FAXDCS, 1, TIFF_ASCII); + break; + case COMPRESSION_LZW: + case COMPRESSION_ADOBE_DEFLATE: + case COMPRESSION_DEFLATE: + case COMPRESSION_LZMA: + if (predictor != (uint16)-1) + TIFFSetField(out, TIFFTAG_PREDICTOR, predictor); + else + CopyField(TIFFTAG_PREDICTOR, predictor); + if (preset != -1) { + if (compression == COMPRESSION_ADOBE_DEFLATE + || compression == COMPRESSION_DEFLATE) + TIFFSetField(out, TIFFTAG_ZIPQUALITY, preset); + else if (compression == COMPRESSION_LZMA) + TIFFSetField(out, TIFFTAG_LZMAPRESET, preset); + } + break; + case COMPRESSION_CCITTFAX3: + case COMPRESSION_CCITTFAX4: + if (compression == COMPRESSION_CCITTFAX3) { + if (g3opts != (uint32) -1) + TIFFSetField(out, TIFFTAG_GROUP3OPTIONS, + g3opts); + else + CopyField(TIFFTAG_GROUP3OPTIONS, g3opts); + } else + CopyTag(TIFFTAG_GROUP4OPTIONS, 1, TIFF_LONG); + CopyTag(TIFFTAG_BADFAXLINES, 1, TIFF_LONG); + CopyTag(TIFFTAG_CLEANFAXDATA, 1, TIFF_LONG); + CopyTag(TIFFTAG_CONSECUTIVEBADFAXLINES, 1, TIFF_LONG); + CopyTag(TIFFTAG_FAXRECVPARAMS, 1, TIFF_LONG); + CopyTag(TIFFTAG_FAXRECVTIME, 1, TIFF_LONG); + CopyTag(TIFFTAG_FAXSUBADDRESS, 1, TIFF_ASCII); + break; + } + { + uint32 len32; + void** data; + if (TIFFGetField(in, TIFFTAG_ICCPROFILE, &len32, &data)) + TIFFSetField(out, TIFFTAG_ICCPROFILE, len32, data); + } + { + uint16 ninks; + const char* inknames; + if (TIFFGetField(in, TIFFTAG_NUMBEROFINKS, &ninks)) { + TIFFSetField(out, TIFFTAG_NUMBEROFINKS, ninks); + if (TIFFGetField(in, TIFFTAG_INKNAMES, &inknames)) { + int inknameslen = strlen(inknames) + 1; + const char* cp = inknames; + while (ninks > 1) { + cp = strchr(cp, '\0'); + cp++; + inknameslen += (strlen(cp) + 1); + ninks--; + } + TIFFSetField(out, TIFFTAG_INKNAMES, inknameslen, inknames); + } + } + } + { + unsigned short pg0, pg1; + + if (pageInSeq == 1) { + if (pageNum < 0) /* only one input file */ { + if (TIFFGetField(in, TIFFTAG_PAGENUMBER, &pg0, &pg1)) + TIFFSetField(out, TIFFTAG_PAGENUMBER, pg0, pg1); + } else + TIFFSetField(out, TIFFTAG_PAGENUMBER, pageNum++, 0); + + } else { + if (TIFFGetField(in, TIFFTAG_PAGENUMBER, &pg0, &pg1)) { + if (pageNum < 0) /* only one input file */ + TIFFSetField(out, TIFFTAG_PAGENUMBER, pg0, pg1); + else + TIFFSetField(out, TIFFTAG_PAGENUMBER, pageNum++, 0); + } + } + } + + for (p = tags; p < &tags[NTAGS]; p++) + CopyTag(p->tag, p->count, p->type); + + cf = pickCopyFunc(in, out, bitspersample, samplesperpixel); + return (cf ? (*cf)(in, out, length, width, samplesperpixel) : FALSE); +} + +/* + * Copy Functions. + */ +#define DECLAREcpFunc(x) \ +static int x(TIFF* in, TIFF* out, \ + uint32 imagelength, uint32 imagewidth, tsample_t spp) + +#define DECLAREreadFunc(x) \ +static int x(TIFF* in, \ + uint8* buf, uint32 imagelength, uint32 imagewidth, tsample_t spp) +typedef int (*readFunc)(TIFF*, uint8*, uint32, uint32, tsample_t); + +#define DECLAREwriteFunc(x) \ +static int x(TIFF* out, \ + uint8* buf, uint32 imagelength, uint32 imagewidth, tsample_t spp) +typedef int (*writeFunc)(TIFF*, uint8*, uint32, uint32, tsample_t); + +/* + * Contig -> contig by scanline for rows/strip change. + */ +DECLAREcpFunc(cpContig2ContigByRow) +{ + tsize_t scanlinesize = TIFFScanlineSize(in); + tdata_t buf; + uint32 row; + + buf = _TIFFmalloc(scanlinesize); + if (!buf) + return 0; + _TIFFmemset(buf, 0, scanlinesize); + (void) imagewidth; (void) spp; + for (row = 0; row < imagelength; row++) { + if (TIFFReadScanline(in, buf, row, 0) < 0 && !ignore) { + TIFFError(TIFFFileName(in), + "Error, can't read scanline %lu", + (unsigned long) row); + goto bad; + } + if (TIFFWriteScanline(out, buf, row, 0) < 0) { + TIFFError(TIFFFileName(out), + "Error, can't write scanline %lu", + (unsigned long) row); + goto bad; + } + } + _TIFFfree(buf); + return 1; +bad: + _TIFFfree(buf); + return 0; +} + + +typedef void biasFn (void *image, void *bias, uint32 pixels); + +#define subtract(bits) \ +static void subtract##bits (void *i, void *b, uint32 pixels)\ +{\ + uint##bits *image = i;\ + uint##bits *bias = b;\ + while (pixels--) {\ + *image = *image > *bias ? *image-*bias : 0;\ + image++, bias++; \ + } \ +} + +subtract(8) +subtract(16) +subtract(32) + +static biasFn *lineSubtractFn (unsigned bits) +{ + switch (bits) { + case 8: return subtract8; + case 16: return subtract16; + case 32: return subtract32; + } + return NULL; +} + +/* + * Contig -> contig by scanline while subtracting a bias image. + */ +DECLAREcpFunc(cpBiasedContig2Contig) +{ + if (spp == 1) { + tsize_t biasSize = TIFFScanlineSize(bias); + tsize_t bufSize = TIFFScanlineSize(in); + tdata_t buf, biasBuf; + uint32 biasWidth = 0, biasLength = 0; + TIFFGetField(bias, TIFFTAG_IMAGEWIDTH, &biasWidth); + TIFFGetField(bias, TIFFTAG_IMAGELENGTH, &biasLength); + if (biasSize == bufSize && + imagelength == biasLength && imagewidth == biasWidth) { + uint16 sampleBits = 0; + biasFn *subtractLine; + TIFFGetField(in, TIFFTAG_BITSPERSAMPLE, &sampleBits); + subtractLine = lineSubtractFn (sampleBits); + if (subtractLine) { + uint32 row; + buf = _TIFFmalloc(bufSize); + biasBuf = _TIFFmalloc(bufSize); + for (row = 0; row < imagelength; row++) { + if (TIFFReadScanline(in, buf, row, 0) < 0 + && !ignore) { + TIFFError(TIFFFileName(in), + "Error, can't read scanline %lu", + (unsigned long) row); + goto bad; + } + if (TIFFReadScanline(bias, biasBuf, row, 0) < 0 + && !ignore) { + TIFFError(TIFFFileName(in), + "Error, can't read biased scanline %lu", + (unsigned long) row); + goto bad; + } + subtractLine (buf, biasBuf, imagewidth); + if (TIFFWriteScanline(out, buf, row, 0) < 0) { + TIFFError(TIFFFileName(out), + "Error, can't write scanline %lu", + (unsigned long) row); + goto bad; + } + } + + _TIFFfree(buf); + _TIFFfree(biasBuf); + TIFFSetDirectory(bias, + TIFFCurrentDirectory(bias)); /* rewind */ + return 1; +bad: + _TIFFfree(buf); + _TIFFfree(biasBuf); + return 0; + } else { + TIFFError(TIFFFileName(in), + "No support for biasing %d bit pixels\n", + sampleBits); + return 0; + } + } + TIFFError(TIFFFileName(in), + "Bias image %s,%d\nis not the same size as %s,%d\n", + TIFFFileName(bias), TIFFCurrentDirectory(bias), + TIFFFileName(in), TIFFCurrentDirectory(in)); + return 0; + } else { + TIFFError(TIFFFileName(in), + "Can't bias %s,%d as it has >1 Sample/Pixel\n", + TIFFFileName(in), TIFFCurrentDirectory(in)); + return 0; + } + +} + + +/* + * Strip -> strip for change in encoding. + */ +DECLAREcpFunc(cpDecodedStrips) +{ + tsize_t stripsize = TIFFStripSize(in); + tdata_t buf = _TIFFmalloc(stripsize); + + (void) imagewidth; (void) spp; + if (buf) { + tstrip_t s, ns = TIFFNumberOfStrips(in); + uint32 row = 0; + _TIFFmemset(buf, 0, stripsize); + for (s = 0; s < ns; s++) { + tsize_t cc = (row + rowsperstrip > imagelength) ? + TIFFVStripSize(in, imagelength - row) : stripsize; + if (TIFFReadEncodedStrip(in, s, buf, cc) < 0 + && !ignore) { + TIFFError(TIFFFileName(in), + "Error, can't read strip %lu", + (unsigned long) s); + goto bad; + } + if (TIFFWriteEncodedStrip(out, s, buf, cc) < 0) { + TIFFError(TIFFFileName(out), + "Error, can't write strip %lu", + (unsigned long) s); + goto bad; + } + row += rowsperstrip; + } + _TIFFfree(buf); + return 1; + } else { + TIFFError(TIFFFileName(in), + "Error, can't allocate memory buffer of size %lu " + "to read strips", (unsigned long) stripsize); + return 0; + } + +bad: + _TIFFfree(buf); + return 0; +} + +/* + * Separate -> separate by row for rows/strip change. + */ +DECLAREcpFunc(cpSeparate2SeparateByRow) +{ + tsize_t scanlinesize = TIFFScanlineSize(in); + tdata_t buf; + uint32 row; + tsample_t s; + + (void) imagewidth; + buf = _TIFFmalloc(scanlinesize); + if (!buf) + return 0; + _TIFFmemset(buf, 0, scanlinesize); + for (s = 0; s < spp; s++) { + for (row = 0; row < imagelength; row++) { + if (TIFFReadScanline(in, buf, row, s) < 0 && !ignore) { + TIFFError(TIFFFileName(in), + "Error, can't read scanline %lu", + (unsigned long) row); + goto bad; + } + if (TIFFWriteScanline(out, buf, row, s) < 0) { + TIFFError(TIFFFileName(out), + "Error, can't write scanline %lu", + (unsigned long) row); + goto bad; + } + } + } + _TIFFfree(buf); + return 1; +bad: + _TIFFfree(buf); + return 0; +} + +/* + * Contig -> separate by row. + */ +DECLAREcpFunc(cpContig2SeparateByRow) +{ + tsize_t scanlinesizein = TIFFScanlineSize(in); + tsize_t scanlinesizeout = TIFFScanlineSize(out); + tdata_t inbuf; + tdata_t outbuf; + register uint8 *inp, *outp; + register uint32 n; + uint32 row; + tsample_t s; + + inbuf = _TIFFmalloc(scanlinesizein); + outbuf = _TIFFmalloc(scanlinesizeout); + if (!inbuf || !outbuf) + return 0; + _TIFFmemset(inbuf, 0, scanlinesizein); + _TIFFmemset(outbuf, 0, scanlinesizeout); + /* unpack channels */ + for (s = 0; s < spp; s++) { + for (row = 0; row < imagelength; row++) { + if (TIFFReadScanline(in, inbuf, row, 0) < 0 + && !ignore) { + TIFFError(TIFFFileName(in), + "Error, can't read scanline %lu", + (unsigned long) row); + goto bad; + } + inp = ((uint8*)inbuf) + s; + outp = (uint8*)outbuf; + for (n = imagewidth; n-- > 0;) { + *outp++ = *inp; + inp += spp; + } + if (TIFFWriteScanline(out, outbuf, row, s) < 0) { + TIFFError(TIFFFileName(out), + "Error, can't write scanline %lu", + (unsigned long) row); + goto bad; + } + } + } + if (inbuf) _TIFFfree(inbuf); + if (outbuf) _TIFFfree(outbuf); + return 1; +bad: + if (inbuf) _TIFFfree(inbuf); + if (outbuf) _TIFFfree(outbuf); + return 0; +} + +/* + * Separate -> contig by row. + */ +DECLAREcpFunc(cpSeparate2ContigByRow) +{ + tsize_t scanlinesizein = TIFFScanlineSize(in); + tsize_t scanlinesizeout = TIFFScanlineSize(out); + tdata_t inbuf; + tdata_t outbuf; + register uint8 *inp, *outp; + register uint32 n; + uint32 row; + tsample_t s; + + inbuf = _TIFFmalloc(scanlinesizein); + outbuf = _TIFFmalloc(scanlinesizeout); + if (!inbuf || !outbuf) + return 0; + _TIFFmemset(inbuf, 0, scanlinesizein); + _TIFFmemset(outbuf, 0, scanlinesizeout); + for (row = 0; row < imagelength; row++) { + /* merge channels */ + for (s = 0; s < spp; s++) { + if (TIFFReadScanline(in, inbuf, row, s) < 0 + && !ignore) { + TIFFError(TIFFFileName(in), + "Error, can't read scanline %lu", + (unsigned long) row); + goto bad; + } + inp = (uint8*)inbuf; + outp = ((uint8*)outbuf) + s; + for (n = imagewidth; n-- > 0;) { + *outp = *inp++; + outp += spp; + } + } + if (TIFFWriteScanline(out, outbuf, row, 0) < 0) { + TIFFError(TIFFFileName(out), + "Error, can't write scanline %lu", + (unsigned long) row); + goto bad; + } + } + if (inbuf) _TIFFfree(inbuf); + if (outbuf) _TIFFfree(outbuf); + return 1; +bad: + if (inbuf) _TIFFfree(inbuf); + if (outbuf) _TIFFfree(outbuf); + return 0; +} + +static void +cpStripToTile(uint8* out, uint8* in, + uint32 rows, uint32 cols, int outskew, int inskew) +{ + while (rows-- > 0) { + uint32 j = cols; + while (j-- > 0) + *out++ = *in++; + out += outskew; + in += inskew; + } +} + +static void +cpContigBufToSeparateBuf(uint8* out, uint8* in, + uint32 rows, uint32 cols, int outskew, int inskew, tsample_t spp, + int bytes_per_sample ) +{ + while (rows-- > 0) { + uint32 j = cols; + while (j-- > 0) + { + int n = bytes_per_sample; + + while( n-- ) { + *out++ = *in++; + } + in += (spp-1) * bytes_per_sample; + } + out += outskew; + in += inskew; + } +} + +static void +cpSeparateBufToContigBuf(uint8* out, uint8* in, + uint32 rows, uint32 cols, int outskew, int inskew, tsample_t spp, + int bytes_per_sample) +{ + while (rows-- > 0) { + uint32 j = cols; + while (j-- > 0) { + int n = bytes_per_sample; + + while( n-- ) { + *out++ = *in++; + } + out += (spp-1)*bytes_per_sample; + } + out += outskew; + in += inskew; + } +} + +static int +cpImage(TIFF* in, TIFF* out, readFunc fin, writeFunc fout, + uint32 imagelength, uint32 imagewidth, tsample_t spp) +{ + int status = 0; + tdata_t buf = NULL; + tsize_t scanlinesize = TIFFRasterScanlineSize(in); + tsize_t bytes = scanlinesize * (tsize_t)imagelength; + /* + * XXX: Check for integer overflow. + */ + if (scanlinesize + && imagelength + && bytes / (tsize_t)imagelength == scanlinesize) { + buf = _TIFFmalloc(bytes); + if (buf) { + if ((*fin)(in, (uint8*)buf, imagelength, + imagewidth, spp)) { + status = (*fout)(out, (uint8*)buf, + imagelength, imagewidth, spp); + } + _TIFFfree(buf); + } else { + TIFFError(TIFFFileName(in), + "Error, can't allocate space for image buffer"); + } + } else { + TIFFError(TIFFFileName(in), "Error, no space for image buffer"); + } + + return status; +} + +DECLAREreadFunc(readContigStripsIntoBuffer) +{ + tsize_t scanlinesize = TIFFScanlineSize(in); + uint8* bufp = buf; + uint32 row; + + (void) imagewidth; (void) spp; + for (row = 0; row < imagelength; row++) { + if (TIFFReadScanline(in, (tdata_t) bufp, row, 0) < 0 + && !ignore) { + TIFFError(TIFFFileName(in), + "Error, can't read scanline %lu", + (unsigned long) row); + return 0; + } + bufp += scanlinesize; + } + + return 1; +} + +DECLAREreadFunc(readSeparateStripsIntoBuffer) +{ + int status = 1; + tsize_t scanlinesize = TIFFScanlineSize(in); + tdata_t scanline; + if (!scanlinesize) + return 0; + + scanline = _TIFFmalloc(scanlinesize); + if (!scanline) + return 0; + _TIFFmemset(scanline, 0, scanlinesize); + (void) imagewidth; + if (scanline) { + uint8* bufp = (uint8*) buf; + uint32 row; + tsample_t s; + for (row = 0; row < imagelength; row++) { + /* merge channels */ + for (s = 0; s < spp; s++) { + uint8* bp = bufp + s; + tsize_t n = scanlinesize; + uint8* sbuf = scanline; + + if (TIFFReadScanline(in, scanline, row, s) < 0 + && !ignore) { + TIFFError(TIFFFileName(in), + "Error, can't read scanline %lu", + (unsigned long) row); + status = 0; + goto done; + } + while (n-- > 0) + *bp = *sbuf++, bp += spp; + } + bufp += scanlinesize * spp; + } + } + +done: + _TIFFfree(scanline); + return status; +} + +DECLAREreadFunc(readContigTilesIntoBuffer) +{ + int status = 1; + tsize_t tilesize = TIFFTileSize(in); + tdata_t tilebuf; + uint32 imagew = TIFFScanlineSize(in); + uint32 tilew = TIFFTileRowSize(in); + int iskew = imagew - tilew; + uint8* bufp = (uint8*) buf; + uint32 tw, tl; + uint32 row; + + (void) spp; + tilebuf = _TIFFmalloc(tilesize); + if (tilebuf == 0) + return 0; + _TIFFmemset(tilebuf, 0, tilesize); + (void) TIFFGetField(in, TIFFTAG_TILEWIDTH, &tw); + (void) TIFFGetField(in, TIFFTAG_TILELENGTH, &tl); + + for (row = 0; row < imagelength; row += tl) { + uint32 nrow = (row+tl > imagelength) ? imagelength-row : tl; + uint32 colb = 0; + uint32 col; + + for (col = 0; col < imagewidth; col += tw) { + if (TIFFReadTile(in, tilebuf, col, row, 0, 0) < 0 + && !ignore) { + TIFFError(TIFFFileName(in), + "Error, can't read tile at %lu %lu", + (unsigned long) col, + (unsigned long) row); + status = 0; + goto done; + } + if (colb + tilew > imagew) { + uint32 width = imagew - colb; + uint32 oskew = tilew - width; + cpStripToTile(bufp + colb, + tilebuf, nrow, width, + oskew + iskew, oskew ); + } else + cpStripToTile(bufp + colb, + tilebuf, nrow, tilew, + iskew, 0); + colb += tilew; + } + bufp += imagew * nrow; + } +done: + _TIFFfree(tilebuf); + return status; +} + +DECLAREreadFunc(readSeparateTilesIntoBuffer) +{ + int status = 1; + uint32 imagew = TIFFRasterScanlineSize(in); + uint32 tilew = TIFFTileRowSize(in); + int iskew = imagew - tilew*spp; + tsize_t tilesize = TIFFTileSize(in); + tdata_t tilebuf; + uint8* bufp = (uint8*) buf; + uint32 tw, tl; + uint32 row; + uint16 bps, bytes_per_sample; + + tilebuf = _TIFFmalloc(tilesize); + if (tilebuf == 0) + return 0; + _TIFFmemset(tilebuf, 0, tilesize); + (void) TIFFGetField(in, TIFFTAG_TILEWIDTH, &tw); + (void) TIFFGetField(in, TIFFTAG_TILELENGTH, &tl); + (void) TIFFGetField(in, TIFFTAG_BITSPERSAMPLE, &bps); + assert( bps % 8 == 0 ); + bytes_per_sample = bps/8; + + for (row = 0; row < imagelength; row += tl) { + uint32 nrow = (row+tl > imagelength) ? imagelength-row : tl; + uint32 colb = 0; + uint32 col; + + for (col = 0; col < imagewidth; col += tw) { + tsample_t s; + + for (s = 0; s < spp; s++) { + if (TIFFReadTile(in, tilebuf, col, row, 0, s) < 0 + && !ignore) { + TIFFError(TIFFFileName(in), + "Error, can't read tile at %lu %lu, " + "sample %lu", + (unsigned long) col, + (unsigned long) row, + (unsigned long) s); + status = 0; + goto done; + } + /* + * Tile is clipped horizontally. Calculate + * visible portion and skewing factors. + */ + if (colb + tilew*spp > imagew) { + uint32 width = imagew - colb; + int oskew = tilew*spp - width; + cpSeparateBufToContigBuf( + bufp+colb+s*bytes_per_sample, + tilebuf, nrow, + width/(spp*bytes_per_sample), + oskew + iskew, + oskew/spp, spp, + bytes_per_sample); + } else + cpSeparateBufToContigBuf( + bufp+colb+s*bytes_per_sample, + tilebuf, nrow, tw, + iskew, 0, spp, + bytes_per_sample); + } + colb += tilew*spp; + } + bufp += imagew * nrow; + } +done: + _TIFFfree(tilebuf); + return status; +} + +DECLAREwriteFunc(writeBufferToContigStrips) +{ + uint32 row, rowsperstrip; + tstrip_t strip = 0; + + (void) imagewidth; (void) spp; + (void) TIFFGetFieldDefaulted(out, TIFFTAG_ROWSPERSTRIP, &rowsperstrip); + for (row = 0; row < imagelength; row += rowsperstrip) { + uint32 nrows = (row+rowsperstrip > imagelength) ? + imagelength-row : rowsperstrip; + tsize_t stripsize = TIFFVStripSize(out, nrows); + if (TIFFWriteEncodedStrip(out, strip++, buf, stripsize) < 0) { + TIFFError(TIFFFileName(out), + "Error, can't write strip %u", strip - 1); + return 0; + } + buf += stripsize; + } + return 1; +} + +DECLAREwriteFunc(writeBufferToSeparateStrips) +{ + uint32 rowsize = imagewidth * spp; + uint32 rowsperstrip; + tsize_t stripsize = TIFFStripSize(out); + tdata_t obuf; + tstrip_t strip = 0; + tsample_t s; + + obuf = _TIFFmalloc(stripsize); + if (obuf == NULL) + return (0); + _TIFFmemset(obuf, 0, stripsize); + (void) TIFFGetFieldDefaulted(out, TIFFTAG_ROWSPERSTRIP, &rowsperstrip); + for (s = 0; s < spp; s++) { + uint32 row; + for (row = 0; row < imagelength; row += rowsperstrip) { + uint32 nrows = (row+rowsperstrip > imagelength) ? + imagelength-row : rowsperstrip; + tsize_t stripsize = TIFFVStripSize(out, nrows); + + cpContigBufToSeparateBuf( + obuf, (uint8*) buf + row*rowsize + s, + nrows, imagewidth, 0, 0, spp, 1); + if (TIFFWriteEncodedStrip(out, strip++, obuf, stripsize) < 0) { + TIFFError(TIFFFileName(out), + "Error, can't write strip %u", + strip - 1); + _TIFFfree(obuf); + return 0; + } + } + } + _TIFFfree(obuf); + return 1; + +} + +DECLAREwriteFunc(writeBufferToContigTiles) +{ + uint32 imagew = TIFFScanlineSize(out); + uint32 tilew = TIFFTileRowSize(out); + int iskew = imagew - tilew; + tsize_t tilesize = TIFFTileSize(out); + tdata_t obuf; + uint8* bufp = (uint8*) buf; + uint32 tl, tw; + uint32 row; + + (void) spp; + + obuf = _TIFFmalloc(TIFFTileSize(out)); + if (obuf == NULL) + return 0; + _TIFFmemset(obuf, 0, tilesize); + (void) TIFFGetField(out, TIFFTAG_TILELENGTH, &tl); + (void) TIFFGetField(out, TIFFTAG_TILEWIDTH, &tw); + for (row = 0; row < imagelength; row += tilelength) { + uint32 nrow = (row+tl > imagelength) ? imagelength-row : tl; + uint32 colb = 0; + uint32 col; + + for (col = 0; col < imagewidth; col += tw) { + /* + * Tile is clipped horizontally. Calculate + * visible portion and skewing factors. + */ + if (colb + tilew > imagew) { + uint32 width = imagew - colb; + int oskew = tilew - width; + cpStripToTile(obuf, bufp + colb, nrow, width, + oskew, oskew + iskew); + } else + cpStripToTile(obuf, bufp + colb, nrow, tilew, + 0, iskew); + if (TIFFWriteTile(out, obuf, col, row, 0, 0) < 0) { + TIFFError(TIFFFileName(out), + "Error, can't write tile at %lu %lu", + (unsigned long) col, + (unsigned long) row); + _TIFFfree(obuf); + return 0; + } + colb += tilew; + } + bufp += nrow * imagew; + } + _TIFFfree(obuf); + return 1; +} + +DECLAREwriteFunc(writeBufferToSeparateTiles) +{ + uint32 imagew = TIFFScanlineSize(out); + tsize_t tilew = TIFFTileRowSize(out); + uint32 iimagew = TIFFRasterScanlineSize(out); + int iskew = iimagew - tilew*spp; + tsize_t tilesize = TIFFTileSize(out); + tdata_t obuf; + uint8* bufp = (uint8*) buf; + uint32 tl, tw; + uint32 row; + uint16 bps, bytes_per_sample; + + obuf = _TIFFmalloc(TIFFTileSize(out)); + if (obuf == NULL) + return 0; + _TIFFmemset(obuf, 0, tilesize); + (void) TIFFGetField(out, TIFFTAG_TILELENGTH, &tl); + (void) TIFFGetField(out, TIFFTAG_TILEWIDTH, &tw); + (void) TIFFGetField(out, TIFFTAG_BITSPERSAMPLE, &bps); + assert( bps % 8 == 0 ); + bytes_per_sample = bps/8; + + for (row = 0; row < imagelength; row += tl) { + uint32 nrow = (row+tl > imagelength) ? imagelength-row : tl; + uint32 colb = 0; + uint32 col; + + for (col = 0; col < imagewidth; col += tw) { + tsample_t s; + for (s = 0; s < spp; s++) { + /* + * Tile is clipped horizontally. Calculate + * visible portion and skewing factors. + */ + if (colb + tilew > imagew) { + uint32 width = (imagew - colb); + int oskew = tilew - width; + + cpContigBufToSeparateBuf(obuf, + bufp + (colb*spp) + s, + nrow, width/bytes_per_sample, + oskew, (oskew*spp)+iskew, spp, + bytes_per_sample); + } else + cpContigBufToSeparateBuf(obuf, + bufp + (colb*spp) + s, + nrow, tilewidth, + 0, iskew, spp, + bytes_per_sample); + if (TIFFWriteTile(out, obuf, col, row, 0, s) < 0) { + TIFFError(TIFFFileName(out), + "Error, can't write tile at %lu %lu " + "sample %lu", + (unsigned long) col, + (unsigned long) row, + (unsigned long) s); + _TIFFfree(obuf); + return 0; + } + } + colb += tilew; + } + bufp += nrow * iimagew; + } + _TIFFfree(obuf); + return 1; +} + +/* + * Contig strips -> contig tiles. + */ +DECLAREcpFunc(cpContigStrips2ContigTiles) +{ + return cpImage(in, out, + readContigStripsIntoBuffer, + writeBufferToContigTiles, + imagelength, imagewidth, spp); +} + +/* + * Contig strips -> separate tiles. + */ +DECLAREcpFunc(cpContigStrips2SeparateTiles) +{ + return cpImage(in, out, + readContigStripsIntoBuffer, + writeBufferToSeparateTiles, + imagelength, imagewidth, spp); +} + +/* + * Separate strips -> contig tiles. + */ +DECLAREcpFunc(cpSeparateStrips2ContigTiles) +{ + return cpImage(in, out, + readSeparateStripsIntoBuffer, + writeBufferToContigTiles, + imagelength, imagewidth, spp); +} + +/* + * Separate strips -> separate tiles. + */ +DECLAREcpFunc(cpSeparateStrips2SeparateTiles) +{ + return cpImage(in, out, + readSeparateStripsIntoBuffer, + writeBufferToSeparateTiles, + imagelength, imagewidth, spp); +} + +/* + * Contig strips -> contig tiles. + */ +DECLAREcpFunc(cpContigTiles2ContigTiles) +{ + return cpImage(in, out, + readContigTilesIntoBuffer, + writeBufferToContigTiles, + imagelength, imagewidth, spp); +} + +/* + * Contig tiles -> separate tiles. + */ +DECLAREcpFunc(cpContigTiles2SeparateTiles) +{ + return cpImage(in, out, + readContigTilesIntoBuffer, + writeBufferToSeparateTiles, + imagelength, imagewidth, spp); +} + +/* + * Separate tiles -> contig tiles. + */ +DECLAREcpFunc(cpSeparateTiles2ContigTiles) +{ + return cpImage(in, out, + readSeparateTilesIntoBuffer, + writeBufferToContigTiles, + imagelength, imagewidth, spp); +} + +/* + * Separate tiles -> separate tiles (tile dimension change). + */ +DECLAREcpFunc(cpSeparateTiles2SeparateTiles) +{ + return cpImage(in, out, + readSeparateTilesIntoBuffer, + writeBufferToSeparateTiles, + imagelength, imagewidth, spp); +} + +/* + * Contig tiles -> contig tiles (tile dimension change). + */ +DECLAREcpFunc(cpContigTiles2ContigStrips) +{ + return cpImage(in, out, + readContigTilesIntoBuffer, + writeBufferToContigStrips, + imagelength, imagewidth, spp); +} + +/* + * Contig tiles -> separate strips. + */ +DECLAREcpFunc(cpContigTiles2SeparateStrips) +{ + return cpImage(in, out, + readContigTilesIntoBuffer, + writeBufferToSeparateStrips, + imagelength, imagewidth, spp); +} + +/* + * Separate tiles -> contig strips. + */ +DECLAREcpFunc(cpSeparateTiles2ContigStrips) +{ + return cpImage(in, out, + readSeparateTilesIntoBuffer, + writeBufferToContigStrips, + imagelength, imagewidth, spp); +} + +/* + * Separate tiles -> separate strips. + */ +DECLAREcpFunc(cpSeparateTiles2SeparateStrips) +{ + return cpImage(in, out, + readSeparateTilesIntoBuffer, + writeBufferToSeparateStrips, + imagelength, imagewidth, spp); +} + +/* + * Select the appropriate copy function to use. + */ +static copyFunc +pickCopyFunc(TIFF* in, TIFF* out, uint16 bitspersample, uint16 samplesperpixel) +{ + uint16 shortv; + uint32 w, l, tw, tl; + int bychunk; + + (void) TIFFGetField(in, TIFFTAG_PLANARCONFIG, &shortv); + if (shortv != config && bitspersample != 8 && samplesperpixel > 1) { + fprintf(stderr, + "%s: Cannot handle different planar configuration w/ bits/sample != 8\n", + TIFFFileName(in)); + return (NULL); + } + TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &w); + TIFFGetField(in, TIFFTAG_IMAGELENGTH, &l); + if (!(TIFFIsTiled(out) || TIFFIsTiled(in))) { + uint32 irps = (uint32) -1L; + TIFFGetField(in, TIFFTAG_ROWSPERSTRIP, &irps); + /* if biased, force decoded copying to allow image subtraction */ + bychunk = !bias && (rowsperstrip == irps); + }else{ /* either in or out is tiled */ + if (bias) { + fprintf(stderr, + "%s: Cannot handle tiled configuration w/bias image\n", + TIFFFileName(in)); + return (NULL); + } + if (TIFFIsTiled(out)) { + if (!TIFFGetField(in, TIFFTAG_TILEWIDTH, &tw)) + tw = w; + if (!TIFFGetField(in, TIFFTAG_TILELENGTH, &tl)) + tl = l; + bychunk = (tw == tilewidth && tl == tilelength); + } else { /* out's not, so in must be tiled */ + TIFFGetField(in, TIFFTAG_TILEWIDTH, &tw); + TIFFGetField(in, TIFFTAG_TILELENGTH, &tl); + bychunk = (tw == w && tl == rowsperstrip); + } + } +#define T 1 +#define F 0 +#define pack(a,b,c,d,e) ((long)(((a)<<11)|((b)<<3)|((c)<<2)|((d)<<1)|(e))) + switch(pack(shortv,config,TIFFIsTiled(in),TIFFIsTiled(out),bychunk)) { + /* Strips -> Tiles */ + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, F,T,F): + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, F,T,T): + return cpContigStrips2ContigTiles; + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, F,T,F): + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, F,T,T): + return cpContigStrips2SeparateTiles; + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, F,T,F): + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, F,T,T): + return cpSeparateStrips2ContigTiles; + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, F,T,F): + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, F,T,T): + return cpSeparateStrips2SeparateTiles; + /* Tiles -> Tiles */ + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, T,T,F): + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, T,T,T): + return cpContigTiles2ContigTiles; + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, T,T,F): + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, T,T,T): + return cpContigTiles2SeparateTiles; + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, T,T,F): + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, T,T,T): + return cpSeparateTiles2ContigTiles; + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, T,T,F): + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, T,T,T): + return cpSeparateTiles2SeparateTiles; + /* Tiles -> Strips */ + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, T,F,F): + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, T,F,T): + return cpContigTiles2ContigStrips; + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, T,F,F): + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, T,F,T): + return cpContigTiles2SeparateStrips; + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, T,F,F): + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, T,F,T): + return cpSeparateTiles2ContigStrips; + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, T,F,F): + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, T,F,T): + return cpSeparateTiles2SeparateStrips; + /* Strips -> Strips */ + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, F,F,F): + return bias ? cpBiasedContig2Contig : cpContig2ContigByRow; + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_CONTIG, F,F,T): + return cpDecodedStrips; + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, F,F,F): + case pack(PLANARCONFIG_CONTIG, PLANARCONFIG_SEPARATE, F,F,T): + return cpContig2SeparateByRow; + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, F,F,F): + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_CONTIG, F,F,T): + return cpSeparate2ContigByRow; + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, F,F,F): + case pack(PLANARCONFIG_SEPARATE, PLANARCONFIG_SEPARATE, F,F,T): + return cpSeparate2SeparateByRow; + } +#undef pack +#undef F +#undef T + fprintf(stderr, "tiffcp: %s: Don't know how to copy/convert image.\n", + TIFFFileName(in)); + return (NULL); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiffcrop.c b/src/SDL2/external/tiff-4.0.3/tools/tiffcrop.c new file mode 100644 index 000000000..9cd5d86fe --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiffcrop.c @@ -0,0 +1,9066 @@ +/* $Id: tiffcrop.c,v 1.20 2010-12-14 02:03:24 faxguy Exp $ */ + +/* tiffcrop.c -- a port of tiffcp.c extended to include manipulations of + * the image data through additional options listed below + * + * Original code: + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * Additions (c) Richard Nolde 2006-2010 + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS OR ANY OTHER COPYRIGHT + * HOLDERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL + * DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND + * ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE + * OR PERFORMANCE OF THIS SOFTWARE. + * + * Some portions of the current code are derived from tiffcp, primarly in + * the areas of lowlevel reading and writing of TAGS, scanlines and tiles though + * some of the original functions have been extended to support arbitrary bit + * depths. These functions are presented at the top of this file. + * + * Add support for the options below to extract sections of image(s) + * and to modify the whole image or selected portions of each image by + * rotations, mirroring, and colorscale/colormap inversion of selected + * types of TIFF images when appropriate. Some color model dependent + * functions are restricted to bilevel or 8 bit per sample data. + * See the man page for the full explanations. + * + * New Options: + * -h Display the syntax guide. + * -v Report the version and last build date for tiffcrop and libtiff. + * -z x1,y1,x2,y2:x3,y3,x4,y4:..xN,yN,xN + 1, yN + 1 + * Specify a series of coordinates to define rectangular + * regions by the top left and lower right corners. + * -e c|d|i|m|s export mode for images and selections from input images + * combined All images and selections are written to a single file (default) + * with multiple selections from one image combined into a single image + * divided All images and selections are written to a single file + * with each selection from one image written to a new image + * image Each input image is written to a new file (numeric filename sequence) + * with multiple selections from the image combined into one image + * multiple Each input image is written to a new file (numeric filename sequence) + * with each selection from the image written to a new image + * separated Individual selections from each image are written to separate files + * -U units [in, cm, px ] inches, centimeters or pixels + * -H # Set horizontal resolution of output images to # + * -V # Set vertical resolution of output images to # + * -J # Horizontal margin of output page to # expressed in current + * units when sectioning image into columns x rows + * using the -S cols:rows option. + * -K # Vertical margin of output page to # expressed in current + * units when sectioning image into columns x rows + * using the -S cols:rows option. + * -X # Horizontal dimension of region to extract expressed in current + * units + * -Y # Vertical dimension of region to extract expressed in current + * units + * -O orient Orientation for output image, portrait, landscape, auto + * -P page Page size for output image segments, eg letter, legal, tabloid, + * etc. + * -S cols:rows Divide the image into equal sized segments using cols across + * and rows down + * -E t|l|r|b Edge to use as origin + * -m #,#,#,# Margins from edges for selection: top, left, bottom, right + * (commas separated) + * -Z #:#,#:# Zones of the image designated as zone X of Y, + * eg 1:3 would be first of three equal portions measured + * from reference edge + * -N odd|even|#,#-#,#|last + * Select sequences and/or ranges of images within file + * to process. The words odd or even may be used to specify + * all odd or even numbered images the word last may be used + * in place of a number in the sequence to indicate the final + * image in the file without knowing how many images there are. + * -R # Rotate image or crop selection by 90,180,or 270 degrees + * clockwise + * -F h|v Flip (mirror) image or crop selection horizontally + * or vertically + * -I [black|white|data|both] + * Invert color space, eg dark to light for bilevel and grayscale images + * If argument is white or black, set the PHOTOMETRIC_INTERPRETATION + * tag to MinIsBlack or MinIsWhite without altering the image data + * If the argument is data or both, the image data are modified: + * both inverts the data and the PHOTOMETRIC_INTERPRETATION tag, + * data inverts the data but not the PHOTOMETRIC_INTERPRETATION tag + * -D input:,output:,format:,level:N,debug:N + * Dump raw data for input and/or output images to individual files + * in raw (binary) format or text (ASCII) representing binary data + * as strings of 1s and 0s. The filename arguments are used as stems + * from which individual files are created for each image. Text format + * includes annotations for image parameters and scanline info. Level + * selects which functions dump data, with higher numbers selecting + * lower level, scanline level routines. Debug reports a limited set + * of messages to monitor progess without enabling dump logs. + */ + +static char tiffcrop_version_id[] = "2.4"; +static char tiffcrop_rev_date[] = "12-13-2010"; + +#include "tif_config.h" +#include "tiffiop.h" + +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef HAVE_STDINT_H +# include +#endif + +#ifndef HAVE_GETOPT +extern int getopt(int, char**, char*); +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +#if defined(VMS) +# define unlink delete +#endif + +#ifndef PATH_MAX +#define PATH_MAX 1024 +#endif + +#ifndef streq +#define streq(a,b) (strcmp((a),(b)) == 0) +#endif +#define strneq(a,b,n) (strncmp((a),(b),(n)) == 0) + +#define TRUE 1 +#define FALSE 0 + +#ifndef TIFFhowmany +#define TIFFhowmany(x, y) ((((uint32)(x))+(((uint32)(y))-1))/((uint32)(y))) +#define TIFFhowmany8(x) (((x)&0x07)?((uint32)(x)>>3)+1:(uint32)(x)>>3) +#endif + +/* + * Definitions and data structures required to support cropping and image + * manipulations. + */ + +#define EDGE_TOP 1 +#define EDGE_LEFT 2 +#define EDGE_BOTTOM 3 +#define EDGE_RIGHT 4 +#define EDGE_CENTER 5 + +#define MIRROR_HORIZ 1 +#define MIRROR_VERT 2 +#define MIRROR_BOTH 3 +#define ROTATECW_90 8 +#define ROTATECW_180 16 +#define ROTATECW_270 32 +#define ROTATE_ANY ROTATECW_90 || ROTATECW_180 || ROTATECW_270 + +#define CROP_NONE 0 +#define CROP_MARGINS 1 +#define CROP_WIDTH 2 +#define CROP_LENGTH 4 +#define CROP_ZONES 8 +#define CROP_REGIONS 16 +#define CROP_ROTATE 32 +#define CROP_MIRROR 64 +#define CROP_INVERT 128 + +/* Modes for writing out images and selections */ +#define ONE_FILE_COMPOSITE 0 /* One file, sections combined sections */ +#define ONE_FILE_SEPARATED 1 /* One file, sections to new IFDs */ +#define FILE_PER_IMAGE_COMPOSITE 2 /* One file per image, combined sections */ +#define FILE_PER_IMAGE_SEPARATED 3 /* One file per input image */ +#define FILE_PER_SELECTION 4 /* One file per selection */ + +#define COMPOSITE_IMAGES 0 /* Selections combined into one image */ +#define SEPARATED_IMAGES 1 /* Selections saved to separate images */ + +#define STRIP 1 +#define TILE 2 + +#define MAX_REGIONS 8 /* number of regions to extract from a single page */ +#define MAX_OUTBUFFS 8 /* must match larger of zones or regions */ +#define MAX_SECTIONS 32 /* number of sections per page to write to output */ +#define MAX_IMAGES 2048 /* number of images in descrete list, not in the file */ +#define MAX_SAMPLES 8 /* maximum number of samples per pixel supported */ +#define MAX_BITS_PER_SAMPLE 64 /* maximum bit depth supported */ +#define MAX_EXPORT_PAGES 999999 /* maximum number of export pages per file */ + +#define DUMP_NONE 0 +#define DUMP_TEXT 1 +#define DUMP_RAW 2 + +/* Offsets into buffer for margins and fixed width and length segments */ +struct offset { + uint32 tmargin; + uint32 lmargin; + uint32 bmargin; + uint32 rmargin; + uint32 crop_width; + uint32 crop_length; + uint32 startx; + uint32 endx; + uint32 starty; + uint32 endy; +}; + +/* Description of a zone within the image. Position 1 of 3 zones would be + * the first third of the image. These are computed after margins and + * width/length requests are applied so that you can extract multiple + * zones from within a larger region for OCR or barcode recognition. + */ + +struct buffinfo { + uint32 size; /* size of this buffer */ + unsigned char *buffer; /* address of the allocated buffer */ +}; + +struct zone { + int position; /* ordinal of segment to be extracted */ + int total; /* total equal sized divisions of crop area */ + }; + +struct pageseg { + uint32 x1; /* index of left edge */ + uint32 x2; /* index of right edge */ + uint32 y1; /* index of top edge */ + uint32 y2; /* index of bottom edge */ + int position; /* ordinal of segment to be extracted */ + int total; /* total equal sized divisions of crop area */ + uint32 buffsize; /* size of buffer needed to hold the cropped zone */ +}; + +struct coordpairs { + double X1; /* index of left edge in current units */ + double X2; /* index of right edge in current units */ + double Y1; /* index of top edge in current units */ + double Y2; /* index of bottom edge in current units */ +}; + +struct region { + uint32 x1; /* pixel offset of left edge */ + uint32 x2; /* pixel offset of right edge */ + uint32 y1; /* pixel offset of top edge */ + uint32 y2; /* picel offset of bottom edge */ + uint32 width; /* width in pixels */ + uint32 length; /* length in pixels */ + uint32 buffsize; /* size of buffer needed to hold the cropped region */ + unsigned char *buffptr; /* address of start of the region */ +}; + +/* Cropping parameters from command line and image data + * Note: This should be renamed to proc_opts and expanded to include all current globals + * if possible, but each function that accesses global variables will have to be redone. + */ +struct crop_mask { + double width; /* Selection width for master crop region in requested units */ + double length; /* Selection length for master crop region in requesed units */ + double margins[4]; /* Top, left, bottom, right margins */ + float xres; /* Horizontal resolution read from image*/ + float yres; /* Vertical resolution read from image */ + uint32 combined_width; /* Width of combined cropped zones */ + uint32 combined_length; /* Length of combined cropped zones */ + uint32 bufftotal; /* Size of buffer needed to hold all the cropped region */ + uint16 img_mode; /* Composite or separate images created from zones or regions */ + uint16 exp_mode; /* Export input images or selections to one or more files */ + uint16 crop_mode; /* Crop options to be applied */ + uint16 res_unit; /* Resolution unit for margins and selections */ + uint16 edge_ref; /* Reference edge for sections extraction and combination */ + uint16 rotation; /* Clockwise rotation of the extracted region or image */ + uint16 mirror; /* Mirror extracted region or image horizontally or vertically */ + uint16 invert; /* Invert the color map of image or region */ + uint16 photometric; /* Status of photometric interpretation for inverted image */ + uint16 selections; /* Number of regions or zones selected */ + uint16 regions; /* Number of regions delimited by corner coordinates */ + struct region regionlist[MAX_REGIONS]; /* Regions within page or master crop region */ + uint16 zones; /* Number of zones delimited by Ordinal:Total requested */ + struct zone zonelist[MAX_REGIONS]; /* Zones indices to define a region */ + struct coordpairs corners[MAX_REGIONS]; /* Coordinates of upper left and lower right corner */ +}; + +#define MAX_PAPERNAMES 49 +#define MAX_PAPERNAME_LENGTH 15 +#define DEFAULT_RESUNIT RESUNIT_INCH +#define DEFAULT_PAGE_HEIGHT 14.0 +#define DEFAULT_PAGE_WIDTH 8.5 +#define DEFAULT_RESOLUTION 300 +#define DEFAULT_PAPER_SIZE "legal" + +#define ORIENTATION_NONE 0 +#define ORIENTATION_PORTRAIT 1 +#define ORIENTATION_LANDSCAPE 2 +#define ORIENTATION_SEASCAPE 4 +#define ORIENTATION_AUTO 16 + +#define PAGE_MODE_NONE 0 +#define PAGE_MODE_RESOLUTION 1 +#define PAGE_MODE_PAPERSIZE 2 +#define PAGE_MODE_MARGINS 4 +#define PAGE_MODE_ROWSCOLS 8 + +#define INVERT_DATA_ONLY 10 +#define INVERT_DATA_AND_TAG 11 + +struct paperdef { + char name[MAX_PAPERNAME_LENGTH]; + double width; + double length; + double asratio; + }; + +/* European page sizes corrected from update sent by + * thomas . jarosch @ intra2net . com on 5/7/2010 + * Paper Size Width Length Aspect Ratio */ +struct paperdef PaperTable[MAX_PAPERNAMES] = { + {"default", 8.500, 14.000, 0.607}, + {"pa4", 8.264, 11.000, 0.751}, + {"letter", 8.500, 11.000, 0.773}, + {"legal", 8.500, 14.000, 0.607}, + {"half-letter", 8.500, 5.514, 1.542}, + {"executive", 7.264, 10.528, 0.690}, + {"tabloid", 11.000, 17.000, 0.647}, + {"11x17", 11.000, 17.000, 0.647}, + {"ledger", 17.000, 11.000, 1.545}, + {"archa", 9.000, 12.000, 0.750}, + {"archb", 12.000, 18.000, 0.667}, + {"archc", 18.000, 24.000, 0.750}, + {"archd", 24.000, 36.000, 0.667}, + {"arche", 36.000, 48.000, 0.750}, + {"csheet", 17.000, 22.000, 0.773}, + {"dsheet", 22.000, 34.000, 0.647}, + {"esheet", 34.000, 44.000, 0.773}, + {"superb", 11.708, 17.042, 0.687}, + {"commercial", 4.139, 9.528, 0.434}, + {"monarch", 3.889, 7.528, 0.517}, + {"envelope-dl", 4.333, 8.681, 0.499}, + {"envelope-c5", 6.389, 9.028, 0.708}, + {"europostcard", 4.139, 5.833, 0.710}, + {"a0", 33.110, 46.811, 0.707}, + {"a1", 23.386, 33.110, 0.706}, + {"a2", 16.535, 23.386, 0.707}, + {"a3", 11.693, 16.535, 0.707}, + {"a4", 8.268, 11.693, 0.707}, + {"a5", 5.827, 8.268, 0.705}, + {"a6", 4.134, 5.827, 0.709}, + {"a7", 2.913, 4.134, 0.705}, + {"a8", 2.047, 2.913, 0.703}, + {"a9", 1.457, 2.047, 0.712}, + {"a10", 1.024, 1.457, 0.703}, + {"b0", 39.370, 55.669, 0.707}, + {"b1", 27.835, 39.370, 0.707}, + {"b2", 19.685, 27.835, 0.707}, + {"b3", 13.898, 19.685, 0.706}, + {"b4", 9.843, 13.898, 0.708}, + {"b5", 6.929, 9.843, 0.704}, + {"b6", 4.921, 6.929, 0.710}, + {"c0", 36.102, 51.063, 0.707}, + {"c1", 25.512, 36.102, 0.707}, + {"c2", 18.031, 25.512, 0.707}, + {"c3", 12.756, 18.031, 0.707}, + {"c4", 9.016, 12.756, 0.707}, + {"c5", 6.378, 9.016, 0.707}, + {"c6", 4.488, 6.378, 0.704}, + {"", 0.000, 0.000, 1.000} +}; + +/* Structure to define input image parameters */ +struct image_data { + float xres; + float yres; + uint32 width; + uint32 length; + uint16 res_unit; + uint16 bps; + uint16 spp; + uint16 planar; + uint16 photometric; + uint16 orientation; + uint16 compression; + uint16 adjustments; +}; + +/* Structure to define the output image modifiers */ +struct pagedef { + char name[16]; + double width; /* width in pixels */ + double length; /* length in pixels */ + double hmargin; /* margins to subtract from width of sections */ + double vmargin; /* margins to subtract from height of sections */ + double hres; /* horizontal resolution for output */ + double vres; /* vertical resolution for output */ + uint32 mode; /* bitmask of modifiers to page format */ + uint16 res_unit; /* resolution unit for output image */ + unsigned int rows; /* number of section rows */ + unsigned int cols; /* number of section cols */ + unsigned int orient; /* portrait, landscape, seascape, auto */ +}; + +struct dump_opts { + int debug; + int format; + int level; + char mode[4]; + char infilename[PATH_MAX + 1]; + char outfilename[PATH_MAX + 1]; + FILE *infile; + FILE *outfile; + }; + +/* globals */ +static int outtiled = -1; +static uint32 tilewidth = 0; +static uint32 tilelength = 0; + +static uint16 config = 0; +static uint16 compression = 0; +static uint16 predictor = 0; +static uint16 fillorder = 0; +static uint32 rowsperstrip = 0; +static uint32 g3opts = 0; +static int ignore = FALSE; /* if true, ignore read errors */ +static uint32 defg3opts = (uint32) -1; +static int quality = 100; /* JPEG quality */ +/* static int jpegcolormode = -1; was JPEGCOLORMODE_RGB; */ +static int jpegcolormode = JPEGCOLORMODE_RGB; +static uint16 defcompression = (uint16) -1; +static uint16 defpredictor = (uint16) -1; +static int pageNum = 0; +static int little_endian = 1; + +/* Functions adapted from tiffcp with additions or significant modifications */ +static int readContigStripsIntoBuffer (TIFF*, uint8*); +static int readSeparateStripsIntoBuffer (TIFF*, uint8*, uint32, uint32, tsample_t, struct dump_opts *); +static int readContigTilesIntoBuffer (TIFF*, uint8*, uint32, uint32, uint32, uint32, tsample_t, uint16); +static int readSeparateTilesIntoBuffer (TIFF*, uint8*, uint32, uint32, uint32, uint32, tsample_t, uint16); +static int writeBufferToContigStrips (TIFF*, uint8*, uint32); +static int writeBufferToContigTiles (TIFF*, uint8*, uint32, uint32, tsample_t, struct dump_opts *); +static int writeBufferToSeparateStrips (TIFF*, uint8*, uint32, uint32, tsample_t, struct dump_opts *); +static int writeBufferToSeparateTiles (TIFF*, uint8*, uint32, uint32, tsample_t, struct dump_opts *); +static int extractContigSamplesToBuffer (uint8 *, uint8 *, uint32, uint32, tsample_t, + uint16, uint16, struct dump_opts *); +static int processCompressOptions(char*); +static void usage(void); + +/* All other functions by Richard Nolde, not found in tiffcp */ +static void initImageData (struct image_data *); +static void initCropMasks (struct crop_mask *); +static void initPageSetup (struct pagedef *, struct pageseg *, struct buffinfo []); +static void initDumpOptions(struct dump_opts *); + +/* Command line and file naming functions */ +void process_command_opts (int, char *[], char *, char *, uint32 *, + uint16 *, uint16 *, uint32 *, uint32 *, uint32 *, + struct crop_mask *, struct pagedef *, + struct dump_opts *, + unsigned int *, unsigned int *); +static int update_output_file (TIFF **, char *, int, char *, unsigned int *); + + +/* * High level functions for whole image manipulation */ +static int get_page_geometry (char *, struct pagedef*); +static int computeInputPixelOffsets(struct crop_mask *, struct image_data *, + struct offset *); +static int computeOutputPixelOffsets (struct crop_mask *, struct image_data *, + struct pagedef *, struct pageseg *, + struct dump_opts *); +static int loadImage(TIFF *, struct image_data *, struct dump_opts *, unsigned char **); +static int correct_orientation(struct image_data *, unsigned char **); +static int getCropOffsets(struct image_data *, struct crop_mask *, struct dump_opts *); +static int processCropSelections(struct image_data *, struct crop_mask *, + unsigned char **, struct buffinfo []); +static int writeSelections(TIFF *, TIFF **, struct crop_mask *, struct image_data *, + struct dump_opts *, struct buffinfo [], + char *, char *, unsigned int*, unsigned int); + +/* Section functions */ +static int createImageSection(uint32, unsigned char **); +static int extractImageSection(struct image_data *, struct pageseg *, + unsigned char *, unsigned char *); +static int writeSingleSection(TIFF *, TIFF *, struct image_data *, + struct dump_opts *, uint32, uint32, + double, double, unsigned char *); +static int writeImageSections(TIFF *, TIFF *, struct image_data *, + struct pagedef *, struct pageseg *, + struct dump_opts *, unsigned char *, + unsigned char **); +/* Whole image functions */ +static int createCroppedImage(struct image_data *, struct crop_mask *, + unsigned char **, unsigned char **); +static int writeCroppedImage(TIFF *, TIFF *, struct image_data *image, + struct dump_opts * dump, + uint32, uint32, unsigned char *, int, int); + +/* Image manipulation functions */ +static int rotateContigSamples8bits(uint16, uint16, uint16, uint32, + uint32, uint32, uint8 *, uint8 *); +static int rotateContigSamples16bits(uint16, uint16, uint16, uint32, + uint32, uint32, uint8 *, uint8 *); +static int rotateContigSamples24bits(uint16, uint16, uint16, uint32, + uint32, uint32, uint8 *, uint8 *); +static int rotateContigSamples32bits(uint16, uint16, uint16, uint32, + uint32, uint32, uint8 *, uint8 *); +static int rotateImage(uint16, struct image_data *, uint32 *, uint32 *, + unsigned char **); +static int mirrorImage(uint16, uint16, uint16, uint32, uint32, + unsigned char *); +static int invertImage(uint16, uint16, uint16, uint32, uint32, + unsigned char *); + +/* Functions to reverse the sequence of samples in a scanline */ +static int reverseSamples8bits (uint16, uint16, uint32, uint8 *, uint8 *); +static int reverseSamples16bits (uint16, uint16, uint32, uint8 *, uint8 *); +static int reverseSamples24bits (uint16, uint16, uint32, uint8 *, uint8 *); +static int reverseSamples32bits (uint16, uint16, uint32, uint8 *, uint8 *); +static int reverseSamplesBytes (uint16, uint16, uint32, uint8 *, uint8 *); + +/* Functions for manipulating individual samples in an image */ +static int extractSeparateRegion(struct image_data *, struct crop_mask *, + unsigned char *, unsigned char *, int); +static int extractCompositeRegions(struct image_data *, struct crop_mask *, + unsigned char *, unsigned char *); +static int extractContigSamples8bits (uint8 *, uint8 *, uint32, + tsample_t, uint16, uint16, + tsample_t, uint32, uint32); +static int extractContigSamples16bits (uint8 *, uint8 *, uint32, + tsample_t, uint16, uint16, + tsample_t, uint32, uint32); +static int extractContigSamples24bits (uint8 *, uint8 *, uint32, + tsample_t, uint16, uint16, + tsample_t, uint32, uint32); +static int extractContigSamples32bits (uint8 *, uint8 *, uint32, + tsample_t, uint16, uint16, + tsample_t, uint32, uint32); +static int extractContigSamplesBytes (uint8 *, uint8 *, uint32, + tsample_t, uint16, uint16, + tsample_t, uint32, uint32); +static int extractContigSamplesShifted8bits (uint8 *, uint8 *, uint32, + tsample_t, uint16, uint16, + tsample_t, uint32, uint32, + int); +static int extractContigSamplesShifted16bits (uint8 *, uint8 *, uint32, + tsample_t, uint16, uint16, + tsample_t, uint32, uint32, + int); +static int extractContigSamplesShifted24bits (uint8 *, uint8 *, uint32, + tsample_t, uint16, uint16, + tsample_t, uint32, uint32, + int); +static int extractContigSamplesShifted32bits (uint8 *, uint8 *, uint32, + tsample_t, uint16, uint16, + tsample_t, uint32, uint32, + int); +static int extractContigSamplesToTileBuffer(uint8 *, uint8 *, uint32, uint32, + uint32, uint32, tsample_t, uint16, + uint16, uint16, struct dump_opts *); + +/* Functions to combine separate planes into interleaved planes */ +static int combineSeparateSamples8bits (uint8 *[], uint8 *, uint32, uint32, + uint16, uint16, FILE *, int, int); +static int combineSeparateSamples16bits (uint8 *[], uint8 *, uint32, uint32, + uint16, uint16, FILE *, int, int); +static int combineSeparateSamples24bits (uint8 *[], uint8 *, uint32, uint32, + uint16, uint16, FILE *, int, int); +static int combineSeparateSamples32bits (uint8 *[], uint8 *, uint32, uint32, + uint16, uint16, FILE *, int, int); +static int combineSeparateSamplesBytes (unsigned char *[], unsigned char *, + uint32, uint32, tsample_t, uint16, + FILE *, int, int); + +static int combineSeparateTileSamples8bits (uint8 *[], uint8 *, uint32, uint32, + uint32, uint32, uint16, uint16, + FILE *, int, int); +static int combineSeparateTileSamples16bits (uint8 *[], uint8 *, uint32, uint32, + uint32, uint32, uint16, uint16, + FILE *, int, int); +static int combineSeparateTileSamples24bits (uint8 *[], uint8 *, uint32, uint32, + uint32, uint32, uint16, uint16, + FILE *, int, int); +static int combineSeparateTileSamples32bits (uint8 *[], uint8 *, uint32, uint32, + uint32, uint32, uint16, uint16, + FILE *, int, int); +static int combineSeparateTileSamplesBytes (unsigned char *[], unsigned char *, + uint32, uint32, uint32, uint32, + tsample_t, uint16, FILE *, int, int); + +/* Dump functions for debugging */ +static void dump_info (FILE *, int, char *, char *, ...); +static int dump_data (FILE *, int, char *, unsigned char *, uint32); +static int dump_byte (FILE *, int, char *, unsigned char); +static int dump_short (FILE *, int, char *, uint16); +static int dump_long (FILE *, int, char *, uint32); +static int dump_wide (FILE *, int, char *, uint64); +static int dump_buffer (FILE *, int, uint32, uint32, uint32, unsigned char *); + +/* End function declarations */ +/* Functions derived in whole or in part from tiffcp */ +/* The following functions are taken largely intact from tiffcp */ + +static char* usage_info[] = { +"usage: tiffcrop [options] source1 ... sourceN destination", +"where options are:", +" -h Print this syntax listing", +" -v Print tiffcrop version identifier and last revision date", +" ", +" -a Append to output instead of overwriting", +" -d offset Set initial directory offset, counting first image as one, not zero", +" -p contig Pack samples contiguously (e.g. RGBRGB...)", +" -p separate Store samples separately (e.g. RRR...GGG...BBB...)", +" -s Write output in strips", +" -t Write output in tiles", +" -i Ignore read errors", +" ", +" -r # Make each strip have no more than # rows", +" -w # Set output tile width (pixels)", +" -l # Set output tile length (pixels)", +" ", +" -f lsb2msb Force lsb-to-msb FillOrder for output", +" -f msb2lsb Force msb-to-lsb FillOrder for output", +"", +" -c lzw[:opts] Compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] Compress output with deflate encoding", +" -c jpeg[:opts] Compress output with JPEG encoding", +" -c packbits Compress output with packbits encoding", +" -c g3[:opts] Compress output with CCITT Group 3 encoding", +" -c g4 Compress output with CCITT Group 4 encoding", +" -c none Use no compression algorithm on output", +" ", +"Group 3 options:", +" 1d Use default CCITT Group 3 1D-encoding", +" 2d Use optional CCITT Group 3 2D-encoding", +" fill Byte-align EOL codes", +"For example, -c g3:2d:fill to get G3-2D-encoded data with byte-aligned EOLs", +" ", +"JPEG options:", +" # Set compression quality level (0-100, default 100)", +" raw Output color image as raw YCbCr", +" rgb Output color image as RGB", +"For example, -c jpeg:rgb:50 to get JPEG-encoded RGB data with 50% comp. quality", +" ", +"LZW and deflate options:", +" # Set predictor value", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +" ", +"Page and selection options:", +" -N odd|even|#,#-#,#|last sequences and ranges of images within file to process", +" The words odd or even may be used to specify all odd or even numbered images.", +" The word last may be used in place of a number in the sequence to indicate.", +" The final image in the file without knowing how many images there are.", +" Numbers are counted from one even though TIFF IFDs are counted from zero.", +" ", +" -E t|l|r|b edge to use as origin for width and length of crop region", +" -U units [in, cm, px ] inches, centimeters or pixels", +" ", +" -m #,#,#,# margins from edges for selection: top, left, bottom, right separated by commas", +" -X # horizontal dimension of region to extract expressed in current units", +" -Y # vertical dimension of region to extract expressed in current units", +" -Z #:#,#:# zones of the image designated as position X of Y,", +" eg 1:3 would be first of three equal portions measured from reference edge", +" -z x1,y1,x2,y2:...:xN,yN,xN+1,yN+1", +" regions of the image designated by upper left and lower right coordinates", +"", +"Export grouping options:", +" -e c|d|i|m|s export mode for images and selections from input images.", +" When exporting a composite image from multiple zones or regions", +" (combined and image modes), the selections must have equal sizes", +" for the axis perpendicular to the edge specified with -E.", +" c|combined All images and selections are written to a single file (default).", +" with multiple selections from one image combined into a single image.", +" d|divided All images and selections are written to a single file", +" with each selection from one image written to a new image.", +" i|image Each input image is written to a new file (numeric filename sequence)", +" with multiple selections from the image combined into one image.", +" m|multiple Each input image is written to a new file (numeric filename sequence)", +" with each selection from the image written to a new image.", +" s|separated Individual selections from each image are written to separate files.", +"", +"Output options:", +" -H # Set horizontal resolution of output images to #", +" -V # Set vertical resolution of output images to #", +" -J # Set horizontal margin of output page to # expressed in current units", +" when sectioning image into columns x rows using the -S cols:rows option", +" -K # Set verticalal margin of output page to # expressed in current units", +" when sectioning image into columns x rows using the -S cols:rows option", +" ", +" -O orient orientation for output image, portrait, landscape, auto", +" -P page page size for output image segments, eg letter, legal, tabloid, etc", +" use #.#x#.# to specify a custom page size in the currently defined units", +" where #.# represents the width and length", +" -S cols:rows Divide the image into equal sized segments using cols across and rows down.", +" ", +" -F hor|vert|both", +" flip (mirror) image or region horizontally, vertically, or both", +" -R # [90,180,or 270] degrees clockwise rotation of image or extracted region", +" -I [black|white|data|both]", +" invert color space, eg dark to light for bilevel and grayscale images", +" If argument is white or black, set the PHOTOMETRIC_INTERPRETATION ", +" tag to MinIsBlack or MinIsWhite without altering the image data", +" If the argument is data or both, the image data are modified:", +" both inverts the data and the PHOTOMETRIC_INTERPRETATION tag,", +" data inverts the data but not the PHOTOMETRIC_INTERPRETATION tag", +" ", +"-D opt1:value1,opt2:value2,opt3:value3:opt4:value4", +" Debug/dump program progress and/or data to non-TIFF files.", +" Options include the following and must be joined as a comma", +" separate list. The use of this option is generally limited to", +" program debugging and development of future options.", +" ", +" debug:N Display limited program progress indicators where larger N", +" increase the level of detail. Note: Tiffcrop may be compiled with", +" -DDEVELMODE to enable additional very low level debug reporting.", +"", +" Format:txt|raw Format any logged data as ASCII text or raw binary ", +" values. ASCII text dumps include strings of ones and zeroes", +" representing the binary values in the image data plus identifying headers.", +" ", +" level:N Specify the level of detail presented in the dump files.", +" This can vary from dumps of the entire input or output image data to dumps", +" of data processed by specific functions. Current range of levels is 1 to 3.", +" ", +" input:full-path-to-directory/input-dumpname", +" ", +" output:full-path-to-directory/output-dumpnaem", +" ", +" When dump files are being written, each image will be written to a separate", +" file with the name built by adding a numeric sequence value to the dumpname", +" and an extension of .txt for ASCII dumps or .bin for binary dumps.", +" ", +" The four debug/dump options are independent, though it makes little sense to", +" specify a dump file without specifying a detail level.", +" ", +NULL +}; + +/* This function could be modified to pass starting sample offset + * and number of samples as args to select fewer than spp + * from input image. These would then be passed to individual + * extractContigSampleXX routines. + */ +static int readContigTilesIntoBuffer (TIFF* in, uint8* buf, + uint32 imagelength, + uint32 imagewidth, + uint32 tw, uint32 tl, + tsample_t spp, uint16 bps) + { + int status = 1; + tsample_t sample = 0; + tsample_t count = spp; + uint32 row, col, trow; + uint32 nrow, ncol; + uint32 dst_rowsize, shift_width; + uint32 bytes_per_sample, bytes_per_pixel; + uint32 trailing_bits, prev_trailing_bits; + uint32 tile_rowsize = TIFFTileRowSize(in); + uint32 src_offset, dst_offset; + uint32 row_offset, col_offset; + uint8 *bufp = (uint8*) buf; + unsigned char *src = NULL; + unsigned char *dst = NULL; + tsize_t tbytes = 0, tile_buffsize = 0; + tsize_t tilesize = TIFFTileSize(in); + unsigned char *tilebuf = NULL; + + bytes_per_sample = (bps + 7) / 8; + bytes_per_pixel = ((bps * spp) + 7) / 8; + + if ((bps % 8) == 0) + shift_width = 0; + else + { + if (bytes_per_pixel < (bytes_per_sample + 1)) + shift_width = bytes_per_pixel; + else + shift_width = bytes_per_sample + 1; + } + + tile_buffsize = tilesize; + + if (tilesize < (tsize_t)(tl * tile_rowsize)) + { +#ifdef DEBUG2 + TIFFError("readContigTilesIntoBuffer", + "Tilesize %lu is too small, using alternate calculation %u", + tilesize, tl * tile_rowsize); +#endif + tile_buffsize = tl * tile_rowsize; + } + + tilebuf = _TIFFmalloc(tile_buffsize); + if (tilebuf == 0) + return 0; + + dst_rowsize = ((imagewidth * bps * spp) + 7) / 8; + for (row = 0; row < imagelength; row += tl) + { + nrow = (row + tl > imagelength) ? imagelength - row : tl; + for (col = 0; col < imagewidth; col += tw) + { + tbytes = TIFFReadTile(in, tilebuf, col, row, 0, 0); + if (tbytes < tilesize && !ignore) + { + TIFFError(TIFFFileName(in), + "Error, can't read tile at row %lu col %lu, Read %lu bytes of %lu", + (unsigned long) col, (unsigned long) row, (unsigned long)tbytes, + (unsigned long)tilesize); + status = 0; + _TIFFfree(tilebuf); + return status; + } + + row_offset = row * dst_rowsize; + col_offset = ((col * bps * spp) + 7)/ 8; + bufp = buf + row_offset + col_offset; + + if (col + tw > imagewidth) + ncol = imagewidth - col; + else + ncol = tw; + + /* Each tile scanline will start on a byte boundary but it + * has to be merged into the scanline for the entire + * image buffer and the previous segment may not have + * ended on a byte boundary + */ + /* Optimization for common bit depths, all samples */ + if (((bps % 8) == 0) && (count == spp)) + { + for (trow = 0; trow < nrow; trow++) + { + src_offset = trow * tile_rowsize; + _TIFFmemcpy (bufp, tilebuf + src_offset, (ncol * spp * bps) / 8); + bufp += (imagewidth * bps * spp) / 8; + } + } + else + { + /* Bit depths not a multiple of 8 and/or extract fewer than spp samples */ + prev_trailing_bits = trailing_bits = 0; + trailing_bits = (ncol * bps * spp) % 8; + + /* for (trow = 0; tl < nrow; trow++) */ + for (trow = 0; trow < nrow; trow++) + { + src_offset = trow * tile_rowsize; + src = tilebuf + src_offset; + dst_offset = (row + trow) * dst_rowsize; + dst = buf + dst_offset + col_offset; + switch (shift_width) + { + case 0: if (extractContigSamplesBytes (src, dst, ncol, sample, + spp, bps, count, 0, ncol)) + { + TIFFError("readContigTilesIntoBuffer", + "Unable to extract row %d from tile %lu", + row, (unsigned long)TIFFCurrentTile(in)); + return 1; + } + break; + case 1: if (bps == 1) + { + if (extractContigSamplesShifted8bits (src, dst, ncol, + sample, spp, + bps, count, + 0, ncol, + prev_trailing_bits)) + { + TIFFError("readContigTilesIntoBuffer", + "Unable to extract row %d from tile %lu", + row, (unsigned long)TIFFCurrentTile(in)); + return 1; + } + break; + } + else + if (extractContigSamplesShifted16bits (src, dst, ncol, + sample, spp, + bps, count, + 0, ncol, + prev_trailing_bits)) + { + TIFFError("readContigTilesIntoBuffer", + "Unable to extract row %d from tile %lu", + row, (unsigned long)TIFFCurrentTile(in)); + return 1; + } + break; + case 2: if (extractContigSamplesShifted24bits (src, dst, ncol, + sample, spp, + bps, count, + 0, ncol, + prev_trailing_bits)) + { + TIFFError("readContigTilesIntoBuffer", + "Unable to extract row %d from tile %lu", + row, (unsigned long)TIFFCurrentTile(in)); + return 1; + } + break; + case 3: + case 4: + case 5: if (extractContigSamplesShifted32bits (src, dst, ncol, + sample, spp, + bps, count, + 0, ncol, + prev_trailing_bits)) + { + TIFFError("readContigTilesIntoBuffer", + "Unable to extract row %d from tile %lu", + row, (unsigned long)TIFFCurrentTile(in)); + return 1; + } + break; + default: TIFFError("readContigTilesIntoBuffer", "Unsupported bit depth %d", bps); + return 1; + } + } + prev_trailing_bits += trailing_bits; + if (prev_trailing_bits > 7) + prev_trailing_bits-= 8; + } + } + } + + _TIFFfree(tilebuf); + return status; + } + +static int readSeparateTilesIntoBuffer (TIFF* in, uint8 *obuf, + uint32 imagelength, uint32 imagewidth, + uint32 tw, uint32 tl, + uint16 spp, uint16 bps) + { + int i, status = 1, sample; + int shift_width, bytes_per_pixel; + uint16 bytes_per_sample; + uint32 row, col; /* Current row and col of image */ + uint32 nrow, ncol; /* Number of rows and cols in current tile */ + uint32 row_offset, col_offset; /* Output buffer offsets */ + tsize_t tbytes = 0, tilesize = TIFFTileSize(in); + tsample_t s; + uint8* bufp = (uint8*)obuf; + unsigned char *srcbuffs[MAX_SAMPLES]; + unsigned char *tbuff = NULL; + + bytes_per_sample = (bps + 7) / 8; + + for (sample = 0; (sample < spp) && (sample < MAX_SAMPLES); sample++) + { + srcbuffs[sample] = NULL; + tbuff = (unsigned char *)_TIFFmalloc(tilesize + 8); + if (!tbuff) + { + TIFFError ("readSeparateTilesIntoBuffer", + "Unable to allocate tile read buffer for sample %d", sample); + for (i = 0; i < sample; i++) + _TIFFfree (srcbuffs[i]); + return 0; + } + srcbuffs[sample] = tbuff; + } + /* Each tile contains only the data for a single plane + * arranged in scanlines of tw * bytes_per_sample bytes. + */ + for (row = 0; row < imagelength; row += tl) + { + nrow = (row + tl > imagelength) ? imagelength - row : tl; + for (col = 0; col < imagewidth; col += tw) + { + for (s = 0; s < spp; s++) + { /* Read each plane of a tile set into srcbuffs[s] */ + tbytes = TIFFReadTile(in, srcbuffs[s], col, row, 0, s); + if (tbytes < 0 && !ignore) + { + TIFFError(TIFFFileName(in), + "Error, can't read tile for row %lu col %lu, " + "sample %lu", + (unsigned long) col, (unsigned long) row, + (unsigned long) s); + status = 0; + for (sample = 0; (sample < spp) && (sample < MAX_SAMPLES); sample++) + { + tbuff = srcbuffs[sample]; + if (tbuff != NULL) + _TIFFfree(tbuff); + } + return status; + } + } + /* Tiles on the right edge may be padded out to tw + * which must be a multiple of 16. + * Ncol represents the visible (non padding) portion. + */ + if (col + tw > imagewidth) + ncol = imagewidth - col; + else + ncol = tw; + + row_offset = row * (((imagewidth * spp * bps) + 7) / 8); + col_offset = ((col * spp * bps) + 7) / 8; + bufp = obuf + row_offset + col_offset; + + if ((bps % 8) == 0) + { + if (combineSeparateTileSamplesBytes(srcbuffs, bufp, ncol, nrow, imagewidth, + tw, spp, bps, NULL, 0, 0)) + { + status = 0; + break; + } + } + else + { + bytes_per_pixel = ((bps * spp) + 7) / 8; + if (bytes_per_pixel < (bytes_per_sample + 1)) + shift_width = bytes_per_pixel; + else + shift_width = bytes_per_sample + 1; + + switch (shift_width) + { + case 1: if (combineSeparateTileSamples8bits (srcbuffs, bufp, ncol, nrow, + imagewidth, tw, spp, bps, + NULL, 0, 0)) + { + status = 0; + break; + } + break; + case 2: if (combineSeparateTileSamples16bits (srcbuffs, bufp, ncol, nrow, + imagewidth, tw, spp, bps, + NULL, 0, 0)) + { + status = 0; + break; + } + break; + case 3: if (combineSeparateTileSamples24bits (srcbuffs, bufp, ncol, nrow, + imagewidth, tw, spp, bps, + NULL, 0, 0)) + { + status = 0; + break; + } + break; + case 4: + case 5: + case 6: + case 7: + case 8: if (combineSeparateTileSamples32bits (srcbuffs, bufp, ncol, nrow, + imagewidth, tw, spp, bps, + NULL, 0, 0)) + { + status = 0; + break; + } + break; + default: TIFFError ("readSeparateTilesIntoBuffer", "Unsupported bit depth: %d", bps); + status = 0; + break; + } + } + } + } + + for (sample = 0; (sample < spp) && (sample < MAX_SAMPLES); sample++) + { + tbuff = srcbuffs[sample]; + if (tbuff != NULL) + _TIFFfree(tbuff); + } + + return status; + } + +static int writeBufferToContigStrips(TIFF* out, uint8* buf, uint32 imagelength) + { + uint32 row, nrows, rowsperstrip; + tstrip_t strip = 0; + tsize_t stripsize; + + TIFFGetFieldDefaulted(out, TIFFTAG_ROWSPERSTRIP, &rowsperstrip); + for (row = 0; row < imagelength; row += rowsperstrip) + { + nrows = (row + rowsperstrip > imagelength) ? + imagelength - row : rowsperstrip; + stripsize = TIFFVStripSize(out, nrows); + if (TIFFWriteEncodedStrip(out, strip++, buf, stripsize) < 0) + { + TIFFError(TIFFFileName(out), "Error, can't write strip %u", strip - 1); + return 1; + } + buf += stripsize; + } + + return 0; + } + +/* Abandon plans to modify code so that plannar orientation separate images + * do not have all samples for each channel written before all samples + * for the next channel have been abandoned. + * Libtiff internals seem to depend on all data for a given sample + * being contiguous within a strip or tile when PLANAR_CONFIG is + * separate. All strips or tiles of a given plane are written + * before any strips or tiles of a different plane are stored. + */ +static int +writeBufferToSeparateStrips (TIFF* out, uint8* buf, + uint32 length, uint32 width, uint16 spp, + struct dump_opts *dump) + { + uint8 *src; + uint16 bps; + uint32 row, nrows, rowsize, rowsperstrip; + uint32 bytes_per_sample; + tsample_t s; + tstrip_t strip = 0; + tsize_t stripsize = TIFFStripSize(out); + tsize_t rowstripsize, scanlinesize = TIFFScanlineSize(out); + tsize_t total_bytes = 0; + tdata_t obuf; + + (void) TIFFGetFieldDefaulted(out, TIFFTAG_ROWSPERSTRIP, &rowsperstrip); + (void) TIFFGetField(out, TIFFTAG_BITSPERSAMPLE, &bps); + bytes_per_sample = (bps + 7) / 8; + rowsize = ((bps * spp * width) + 7) / 8; /* source has interleaved samples */ + rowstripsize = rowsperstrip * bytes_per_sample * (width + 1); + + obuf = _TIFFmalloc (rowstripsize); + if (obuf == NULL) + return 1; + + for (s = 0; s < spp; s++) + { + for (row = 0; row < length; row += rowsperstrip) + { + nrows = (row + rowsperstrip > length) ? length - row : rowsperstrip; + + stripsize = TIFFVStripSize(out, nrows); + src = buf + (row * rowsize); + total_bytes += stripsize; + memset (obuf, '\0', rowstripsize); + if (extractContigSamplesToBuffer(obuf, src, nrows, width, s, spp, bps, dump)) + { + _TIFFfree(obuf); + return 1; + } + if ((dump->outfile != NULL) && (dump->level == 1)) + { + dump_info(dump->outfile, dump->format,"", + "Sample %2d, Strip: %2d, bytes: %4d, Row %4d, bytes: %4d, Input offset: %6d", + s + 1, strip + 1, stripsize, row + 1, scanlinesize, src - buf); + dump_buffer(dump->outfile, dump->format, nrows, scanlinesize, row, obuf); + } + + if (TIFFWriteEncodedStrip(out, strip++, obuf, stripsize) < 0) + { + TIFFError(TIFFFileName(out), "Error, can't write strip %u", strip - 1); + _TIFFfree(obuf); + return 1; + } + } + } + + _TIFFfree(obuf); + return 0; +} + +/* Extract all planes from contiguous buffer into a single tile buffer + * to be written out as a tile. + */ +static int writeBufferToContigTiles (TIFF* out, uint8* buf, uint32 imagelength, + uint32 imagewidth, tsample_t spp, + struct dump_opts* dump) + { + uint16 bps; + uint32 tl, tw; + uint32 row, col, nrow, ncol; + uint32 src_rowsize, col_offset; + uint32 tile_rowsize = TIFFTileRowSize(out); + uint8* bufp = (uint8*) buf; + tsize_t tile_buffsize = 0; + tsize_t tilesize = TIFFTileSize(out); + unsigned char *tilebuf = NULL; + + TIFFGetField(out, TIFFTAG_TILELENGTH, &tl); + TIFFGetField(out, TIFFTAG_TILEWIDTH, &tw); + TIFFGetField(out, TIFFTAG_BITSPERSAMPLE, &bps); + + tile_buffsize = tilesize; + if (tilesize < (tsize_t)(tl * tile_rowsize)) + { +#ifdef DEBUG2 + TIFFError("writeBufferToContigTiles", + "Tilesize %lu is too small, using alternate calculation %u", + tilesize, tl * tile_rowsize); +#endif + tile_buffsize = tl * tile_rowsize; + } + + tilebuf = _TIFFmalloc(tile_buffsize); + if (tilebuf == 0) + return 1; + + src_rowsize = ((imagewidth * spp * bps) + 7) / 8; + for (row = 0; row < imagelength; row += tl) + { + nrow = (row + tl > imagelength) ? imagelength - row : tl; + for (col = 0; col < imagewidth; col += tw) + { + /* Calculate visible portion of tile. */ + if (col + tw > imagewidth) + ncol = imagewidth - col; + else + ncol = tw; + + col_offset = (((col * bps * spp) + 7) / 8); + bufp = buf + (row * src_rowsize) + col_offset; + if (extractContigSamplesToTileBuffer(tilebuf, bufp, nrow, ncol, imagewidth, + tw, 0, spp, spp, bps, dump) > 0) + { + TIFFError("writeBufferToContigTiles", + "Unable to extract data to tile for row %lu, col %lu", + (unsigned long) row, (unsigned long)col); + _TIFFfree(tilebuf); + return 1; + } + + if (TIFFWriteTile(out, tilebuf, col, row, 0, 0) < 0) + { + TIFFError("writeBufferToContigTiles", + "Cannot write tile at %lu %lu", + (unsigned long) col, (unsigned long) row); + _TIFFfree(tilebuf); + return 1; + } + } + } + _TIFFfree(tilebuf); + + return 0; + } /* end writeBufferToContigTiles */ + +/* Extract each plane from contiguous buffer into a single tile buffer + * to be written out as a tile. + */ +static int writeBufferToSeparateTiles (TIFF* out, uint8* buf, uint32 imagelength, + uint32 imagewidth, tsample_t spp, + struct dump_opts * dump) + { + tdata_t obuf = _TIFFmalloc(TIFFTileSize(out)); + uint32 tl, tw; + uint32 row, col, nrow, ncol; + uint32 src_rowsize, col_offset; + uint16 bps; + tsample_t s; + uint8* bufp = (uint8*) buf; + + if (obuf == NULL) + return 1; + + TIFFGetField(out, TIFFTAG_TILELENGTH, &tl); + TIFFGetField(out, TIFFTAG_TILEWIDTH, &tw); + TIFFGetField(out, TIFFTAG_BITSPERSAMPLE, &bps); + src_rowsize = ((imagewidth * spp * bps) + 7) / 8; + + for (row = 0; row < imagelength; row += tl) + { + nrow = (row + tl > imagelength) ? imagelength - row : tl; + for (col = 0; col < imagewidth; col += tw) + { + /* Calculate visible portion of tile. */ + if (col + tw > imagewidth) + ncol = imagewidth - col; + else + ncol = tw; + + col_offset = (((col * bps * spp) + 7) / 8); + bufp = buf + (row * src_rowsize) + col_offset; + + for (s = 0; s < spp; s++) + { + if (extractContigSamplesToTileBuffer(obuf, bufp, nrow, ncol, imagewidth, + tw, s, 1, spp, bps, dump) > 0) + { + TIFFError("writeBufferToSeparateTiles", + "Unable to extract data to tile for row %lu, col %lu sample %d", + (unsigned long) row, (unsigned long)col, (int)s); + _TIFFfree(obuf); + return 1; + } + + if (TIFFWriteTile(out, obuf, col, row, 0, s) < 0) + { + TIFFError("writeBufferToseparateTiles", + "Cannot write tile at %lu %lu sample %lu", + (unsigned long) col, (unsigned long) row, + (unsigned long) s); + _TIFFfree(obuf); + return 1; + } + } + } + } + _TIFFfree(obuf); + + return 0; + } /* end writeBufferToSeparateTiles */ + +static void +processG3Options(char* cp) +{ + if( (cp = strchr(cp, ':')) ) { + if (defg3opts == (uint32) -1) + defg3opts = 0; + do { + cp++; + if (strneq(cp, "1d", 2)) + defg3opts &= ~GROUP3OPT_2DENCODING; + else if (strneq(cp, "2d", 2)) + defg3opts |= GROUP3OPT_2DENCODING; + else if (strneq(cp, "fill", 4)) + defg3opts |= GROUP3OPT_FILLBITS; + else + usage(); + } while( (cp = strchr(cp, ':')) ); + } +} + +static int +processCompressOptions(char* opt) + { + char* cp = NULL; + + if (strneq(opt, "none",4)) + { + defcompression = COMPRESSION_NONE; + } + else if (streq(opt, "packbits")) + { + defcompression = COMPRESSION_PACKBITS; + } + else if (strneq(opt, "jpeg", 4)) + { + cp = strchr(opt, ':'); + defcompression = COMPRESSION_JPEG; + + while (cp) + { + if (isdigit((int)cp[1])) + quality = atoi(cp + 1); + else if (strneq(cp + 1, "raw", 3 )) + jpegcolormode = JPEGCOLORMODE_RAW; + else if (strneq(cp + 1, "rgb", 3 )) + jpegcolormode = JPEGCOLORMODE_RGB; + else + usage(); + cp = strchr(cp + 1, ':'); + } + } + else if (strneq(opt, "g3", 2)) + { + processG3Options(opt); + defcompression = COMPRESSION_CCITTFAX3; + } + else if (streq(opt, "g4")) + { + defcompression = COMPRESSION_CCITTFAX4; + } + else if (strneq(opt, "lzw", 3)) + { + cp = strchr(opt, ':'); + if (cp) + defpredictor = atoi(cp+1); + defcompression = COMPRESSION_LZW; + } + else if (strneq(opt, "zip", 3)) + { + cp = strchr(opt, ':'); + if (cp) + defpredictor = atoi(cp+1); + defcompression = COMPRESSION_ADOBE_DEFLATE; + } + else + return (0); + + return (1); + } + +static void +usage(void) + { + int i; + + fprintf(stderr, "\n%s\n", TIFFGetVersion()); + for (i = 0; usage_info[i] != NULL; i++) + fprintf(stderr, "%s\n", usage_info[i]); + exit(-1); + } + +#define CopyField(tag, v) \ + if (TIFFGetField(in, tag, &v)) TIFFSetField(out, tag, v) +#define CopyField2(tag, v1, v2) \ + if (TIFFGetField(in, tag, &v1, &v2)) TIFFSetField(out, tag, v1, v2) +#define CopyField3(tag, v1, v2, v3) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3)) TIFFSetField(out, tag, v1, v2, v3) +#define CopyField4(tag, v1, v2, v3, v4) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3, &v4)) TIFFSetField(out, tag, v1, v2, v3, v4) + +static void +cpTag(TIFF* in, TIFF* out, uint16 tag, uint16 count, TIFFDataType type) +{ + switch (type) { + case TIFF_SHORT: + if (count == 1) { + uint16 shortv; + CopyField(tag, shortv); + } else if (count == 2) { + uint16 shortv1, shortv2; + CopyField2(tag, shortv1, shortv2); + } else if (count == 4) { + uint16 *tr, *tg, *tb, *ta; + CopyField4(tag, tr, tg, tb, ta); + } else if (count == (uint16) -1) { + uint16 shortv1; + uint16* shortav; + CopyField2(tag, shortv1, shortav); + } + break; + case TIFF_LONG: + { uint32 longv; + CopyField(tag, longv); + } + break; + case TIFF_RATIONAL: + if (count == 1) { + float floatv; + CopyField(tag, floatv); + } else if (count == (uint16) -1) { + float* floatav; + CopyField(tag, floatav); + } + break; + case TIFF_ASCII: + { char* stringv; + CopyField(tag, stringv); + } + break; + case TIFF_DOUBLE: + if (count == 1) { + double doublev; + CopyField(tag, doublev); + } else if (count == (uint16) -1) { + double* doubleav; + CopyField(tag, doubleav); + } + break; + default: + TIFFError(TIFFFileName(in), + "Data type %d is not supported, tag %d skipped", + tag, type); + } +} + +static struct cpTag { + uint16 tag; + uint16 count; + TIFFDataType type; +} tags[] = { + { TIFFTAG_SUBFILETYPE, 1, TIFF_LONG }, + { TIFFTAG_THRESHHOLDING, 1, TIFF_SHORT }, + { TIFFTAG_DOCUMENTNAME, 1, TIFF_ASCII }, + { TIFFTAG_IMAGEDESCRIPTION, 1, TIFF_ASCII }, + { TIFFTAG_MAKE, 1, TIFF_ASCII }, + { TIFFTAG_MODEL, 1, TIFF_ASCII }, + { TIFFTAG_MINSAMPLEVALUE, 1, TIFF_SHORT }, + { TIFFTAG_MAXSAMPLEVALUE, 1, TIFF_SHORT }, + { TIFFTAG_XRESOLUTION, 1, TIFF_RATIONAL }, + { TIFFTAG_YRESOLUTION, 1, TIFF_RATIONAL }, + { TIFFTAG_PAGENAME, 1, TIFF_ASCII }, + { TIFFTAG_XPOSITION, 1, TIFF_RATIONAL }, + { TIFFTAG_YPOSITION, 1, TIFF_RATIONAL }, + { TIFFTAG_RESOLUTIONUNIT, 1, TIFF_SHORT }, + { TIFFTAG_SOFTWARE, 1, TIFF_ASCII }, + { TIFFTAG_DATETIME, 1, TIFF_ASCII }, + { TIFFTAG_ARTIST, 1, TIFF_ASCII }, + { TIFFTAG_HOSTCOMPUTER, 1, TIFF_ASCII }, + { TIFFTAG_WHITEPOINT, (uint16) -1, TIFF_RATIONAL }, + { TIFFTAG_PRIMARYCHROMATICITIES,(uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_HALFTONEHINTS, 2, TIFF_SHORT }, + { TIFFTAG_INKSET, 1, TIFF_SHORT }, + { TIFFTAG_DOTRANGE, 2, TIFF_SHORT }, + { TIFFTAG_TARGETPRINTER, 1, TIFF_ASCII }, + { TIFFTAG_SAMPLEFORMAT, 1, TIFF_SHORT }, + { TIFFTAG_YCBCRCOEFFICIENTS, (uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_YCBCRSUBSAMPLING, 2, TIFF_SHORT }, + { TIFFTAG_YCBCRPOSITIONING, 1, TIFF_SHORT }, + { TIFFTAG_REFERENCEBLACKWHITE, (uint16) -1,TIFF_RATIONAL }, + { TIFFTAG_EXTRASAMPLES, (uint16) -1, TIFF_SHORT }, + { TIFFTAG_SMINSAMPLEVALUE, 1, TIFF_DOUBLE }, + { TIFFTAG_SMAXSAMPLEVALUE, 1, TIFF_DOUBLE }, + { TIFFTAG_STONITS, 1, TIFF_DOUBLE }, +}; +#define NTAGS (sizeof (tags) / sizeof (tags[0])) + +#define CopyTag(tag, count, type) cpTag(in, out, tag, count, type) + +/* Functions written by Richard Nolde, with exceptions noted. */ +void process_command_opts (int argc, char *argv[], char *mp, char *mode, uint32 *dirnum, + uint16 *defconfig, uint16 *deffillorder, uint32 *deftilewidth, + uint32 *deftilelength, uint32 *defrowsperstrip, + struct crop_mask *crop_data, struct pagedef *page, + struct dump_opts *dump, + unsigned int *imagelist, unsigned int *image_count ) + { + int c, good_args = 0; + char *opt_offset = NULL; /* Position in string of value sought */ + char *opt_ptr = NULL; /* Pointer to next token in option set */ + char *sep = NULL; /* Pointer to a token separator */ + unsigned int i, j, start, end; + extern int optind; + extern char* optarg; + + *mp++ = 'w'; + *mp = '\0'; + while ((c = getopt(argc, argv, + "ac:d:e:f:hil:m:p:r:stvw:z:BCD:E:F:H:I:J:K:LMN:O:P:R:S:U:V:X:Y:Z:")) != -1) + { + good_args++; + switch (c) { + case 'a': mode[0] = 'a'; /* append to output */ + break; + case 'c': if (!processCompressOptions(optarg)) /* compression scheme */ + { + TIFFError ("Unknown compression option", "%s", optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + break; + case 'd': start = strtoul(optarg, NULL, 0); /* initial IFD offset */ + if (start == 0) + { + TIFFError ("","Directory offset must be greater than zero"); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + *dirnum = start - 1; + break; + case 'e': switch (tolower(optarg[0])) /* image export modes*/ + { + case 'c': crop_data->exp_mode = ONE_FILE_COMPOSITE; + crop_data->img_mode = COMPOSITE_IMAGES; + break; /* Composite */ + case 'd': crop_data->exp_mode = ONE_FILE_SEPARATED; + crop_data->img_mode = SEPARATED_IMAGES; + break; /* Divided */ + case 'i': crop_data->exp_mode = FILE_PER_IMAGE_COMPOSITE; + crop_data->img_mode = COMPOSITE_IMAGES; + break; /* Image */ + case 'm': crop_data->exp_mode = FILE_PER_IMAGE_SEPARATED; + crop_data->img_mode = SEPARATED_IMAGES; + break; /* Multiple */ + case 's': crop_data->exp_mode = FILE_PER_SELECTION; + crop_data->img_mode = SEPARATED_IMAGES; + break; /* Sections */ + default: TIFFError ("Unknown export mode","%s", optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + break; + case 'f': if (streq(optarg, "lsb2msb")) /* fill order */ + *deffillorder = FILLORDER_LSB2MSB; + else if (streq(optarg, "msb2lsb")) + *deffillorder = FILLORDER_MSB2LSB; + else + { + TIFFError ("Unknown fill order", "%s", optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + break; + case 'h': usage(); + break; + case 'i': ignore = TRUE; /* ignore errors */ + break; + case 'l': outtiled = TRUE; /* tile length */ + *deftilelength = atoi(optarg); + break; + case 'p': /* planar configuration */ + if (streq(optarg, "separate")) + *defconfig = PLANARCONFIG_SEPARATE; + else if (streq(optarg, "contig")) + *defconfig = PLANARCONFIG_CONTIG; + else + { + TIFFError ("Unkown planar configuration", "%s", optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + break; + case 'r': /* rows/strip */ + *defrowsperstrip = atol(optarg); + break; + case 's': /* generate stripped output */ + outtiled = FALSE; + break; + case 't': /* generate tiled output */ + outtiled = TRUE; + break; + case 'v': TIFFError("Library Release", "%s", TIFFGetVersion()); + TIFFError ("Tiffcrop version", "%s, last updated: %s", + tiffcrop_version_id, tiffcrop_rev_date); + TIFFError ("Tiffcp code", "Copyright (c) 1988-1997 Sam Leffler"); + TIFFError (" ", "Copyright (c) 1991-1997 Silicon Graphics, Inc"); + TIFFError ("Tiffcrop additions", "Copyright (c) 2007-2010 Richard Nolde"); + exit (0); + break; + case 'w': /* tile width */ + outtiled = TRUE; + *deftilewidth = atoi(optarg); + break; + case 'z': /* regions of an image specified as x1,y1,x2,y2:x3,y3,x4,y4 etc */ + crop_data->crop_mode |= CROP_REGIONS; + for (i = 0, opt_ptr = strtok (optarg, ":"); + ((opt_ptr != NULL) && (i < MAX_REGIONS)); + (opt_ptr = strtok (NULL, ":")), i++) + { + crop_data->regions++; + if (sscanf(opt_ptr, "%lf,%lf,%lf,%lf", + &crop_data->corners[i].X1, &crop_data->corners[i].Y1, + &crop_data->corners[i].X2, &crop_data->corners[i].Y2) != 4) + { + TIFFError ("Unable to parse coordinates for region", "%d %s", i, optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + } + /* check for remaining elements over MAX_REGIONS */ + if ((opt_ptr != NULL) && (i >= MAX_REGIONS)) + { + TIFFError ("Region list exceeds limit of", "%d regions %s", MAX_REGIONS, optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1);; + } + break; + /* options for file open modes */ + case 'B': *mp++ = 'b'; *mp = '\0'; + break; + case 'L': *mp++ = 'l'; *mp = '\0'; + break; + case 'M': *mp++ = 'm'; *mp = '\0'; + break; + case 'C': *mp++ = 'c'; *mp = '\0'; + break; + /* options for Debugging / data dump */ + case 'D': for (i = 0, opt_ptr = strtok (optarg, ","); + (opt_ptr != NULL); + (opt_ptr = strtok (NULL, ",")), i++) + { + opt_offset = strpbrk(opt_ptr, ":="); + if (opt_offset == NULL) + { + TIFFError("Invalid dump option", "%s", optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + + *opt_offset = '\0'; + /* convert option to lowercase */ + end = strlen (opt_ptr); + for (i = 0; i < end; i++) + *(opt_ptr + i) = tolower(*(opt_ptr + i)); + /* Look for dump format specification */ + if (strncmp(opt_ptr, "for", 3) == 0) + { + /* convert value to lowercase */ + end = strlen (opt_offset + 1); + for (i = 1; i <= end; i++) + *(opt_offset + i) = tolower(*(opt_offset + i)); + /* check dump format value */ + if (strncmp (opt_offset + 1, "txt", 3) == 0) + { + dump->format = DUMP_TEXT; + strcpy (dump->mode, "w"); + } + else + { + if (strncmp(opt_offset + 1, "raw", 3) == 0) + { + dump->format = DUMP_RAW; + strcpy (dump->mode, "wb"); + } + else + { + TIFFError("parse_command_opts", "Unknown dump format %s", opt_offset + 1); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + } + } + else + { /* Look for dump level specification */ + if (strncmp (opt_ptr, "lev", 3) == 0) + dump->level = atoi(opt_offset + 1); + /* Look for input data dump file name */ + if (strncmp (opt_ptr, "in", 2) == 0) + { + strncpy (dump->infilename, opt_offset + 1, PATH_MAX - 20); + dump->infilename[PATH_MAX - 20] = '\0'; + } + /* Look for output data dump file name */ + if (strncmp (opt_ptr, "out", 3) == 0) + { + strncpy (dump->outfilename, opt_offset + 1, PATH_MAX - 20); + dump->outfilename[PATH_MAX - 20] = '\0'; + } + if (strncmp (opt_ptr, "deb", 3) == 0) + dump->debug = atoi(opt_offset + 1); + } + } + if ((strlen(dump->infilename)) || (strlen(dump->outfilename))) + { + if (dump->level == 1) + TIFFError("","Defaulting to dump level 1, no data."); + if (dump->format == DUMP_NONE) + { + TIFFError("", "You must specify a dump format for dump files"); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + } + break; + + /* image manipulation routine options */ + case 'm': /* margins to exclude from selection, uppercase M was already used */ + /* order of values must be TOP, LEFT, BOTTOM, RIGHT */ + crop_data->crop_mode |= CROP_MARGINS; + for (i = 0, opt_ptr = strtok (optarg, ",:"); + ((opt_ptr != NULL) && (i < 4)); + (opt_ptr = strtok (NULL, ",:")), i++) + { + crop_data->margins[i] = atof(opt_ptr); + } + break; + case 'E': /* edge reference */ + switch (tolower(optarg[0])) + { + case 't': crop_data->edge_ref = EDGE_TOP; + break; + case 'b': crop_data->edge_ref = EDGE_BOTTOM; + break; + case 'l': crop_data->edge_ref = EDGE_LEFT; + break; + case 'r': crop_data->edge_ref = EDGE_RIGHT; + break; + default: TIFFError ("Edge reference must be top, bottom, left, or right", "%s", optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + break; + case 'F': /* flip eg mirror image or cropped segment, M was already used */ + crop_data->crop_mode |= CROP_MIRROR; + switch (tolower(optarg[0])) + { + case 'h': crop_data->mirror = MIRROR_HORIZ; + break; + case 'v': crop_data->mirror = MIRROR_VERT; + break; + case 'b': crop_data->mirror = MIRROR_BOTH; + break; + default: TIFFError ("Flip mode must be horiz, vert, or both", "%s", optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + break; + case 'H': /* set horizontal resolution to new value */ + page->hres = atof (optarg); + page->mode |= PAGE_MODE_RESOLUTION; + break; + case 'I': /* invert the color space, eg black to white */ + crop_data->crop_mode |= CROP_INVERT; + /* The PHOTOMETIC_INTERPRETATION tag may be updated */ + if (streq(optarg, "black")) + { + crop_data->photometric = PHOTOMETRIC_MINISBLACK; + continue; + } + if (streq(optarg, "white")) + { + crop_data->photometric = PHOTOMETRIC_MINISWHITE; + continue; + } + if (streq(optarg, "data")) + { + crop_data->photometric = INVERT_DATA_ONLY; + continue; + } + if (streq(optarg, "both")) + { + crop_data->photometric = INVERT_DATA_AND_TAG; + continue; + } + + TIFFError("Missing or unknown option for inverting PHOTOMETRIC_INTERPRETATION", "%s", optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + break; + case 'J': /* horizontal margin for sectioned ouput pages */ + page->hmargin = atof(optarg); + page->mode |= PAGE_MODE_MARGINS; + break; + case 'K': /* vertical margin for sectioned ouput pages*/ + page->vmargin = atof(optarg); + page->mode |= PAGE_MODE_MARGINS; + break; + case 'N': /* list of images to process */ + for (i = 0, opt_ptr = strtok (optarg, ","); + ((opt_ptr != NULL) && (i < MAX_IMAGES)); + (opt_ptr = strtok (NULL, ","))) + { /* We do not know how many images are in file yet + * so we build a list to include the maximum allowed + * and follow it until we hit the end of the file. + * Image count is not accurate for odd, even, last + * so page numbers won't be valid either. + */ + if (streq(opt_ptr, "odd")) + { + for (j = 1; j <= MAX_IMAGES; j += 2) + imagelist[i++] = j; + *image_count = (MAX_IMAGES - 1) / 2; + break; + } + else + { + if (streq(opt_ptr, "even")) + { + for (j = 2; j <= MAX_IMAGES; j += 2) + imagelist[i++] = j; + *image_count = MAX_IMAGES / 2; + break; + } + else + { + if (streq(opt_ptr, "last")) + imagelist[i++] = MAX_IMAGES; + else /* single value between commas */ + { + sep = strpbrk(opt_ptr, ":-"); + if (!sep) + imagelist[i++] = atoi(opt_ptr); + else + { + *sep = '\0'; + start = atoi (opt_ptr); + if (!strcmp((sep + 1), "last")) + end = MAX_IMAGES; + else + end = atoi (sep + 1); + for (j = start; j <= end && j - start + i < MAX_IMAGES; j++) + imagelist[i++] = j; + } + } + } + } + } + *image_count = i; + break; + case 'O': /* page orientation */ + switch (tolower(optarg[0])) + { + case 'a': page->orient = ORIENTATION_AUTO; + break; + case 'p': page->orient = ORIENTATION_PORTRAIT; + break; + case 'l': page->orient = ORIENTATION_LANDSCAPE; + break; + default: TIFFError ("Orientation must be portrait, landscape, or auto.", "%s", optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + break; + case 'P': /* page size selection */ + if (sscanf(optarg, "%lfx%lf", &page->width, &page->length) == 2) + { + strcpy (page->name, "Custom"); + page->mode |= PAGE_MODE_PAPERSIZE; + break; + } + if (get_page_geometry (optarg, page)) + { + if (!strcmp(optarg, "list")) + { + TIFFError("", "Name Width Length (in inches)"); + for (i = 0; i < MAX_PAPERNAMES - 1; i++) + TIFFError ("", "%-15.15s %5.2f %5.2f", + PaperTable[i].name, PaperTable[i].width, + PaperTable[i].length); + exit (-1); + } + + TIFFError ("Invalid paper size", "%s", optarg); + TIFFError ("", "Select one of:"); + TIFFError("", "Name Width Length (in inches)"); + for (i = 0; i < MAX_PAPERNAMES - 1; i++) + TIFFError ("", "%-15.15s %5.2f %5.2f", + PaperTable[i].name, PaperTable[i].width, + PaperTable[i].length); + exit (-1); + } + else + { + page->mode |= PAGE_MODE_PAPERSIZE; + } + break; + case 'R': /* rotate image or cropped segment */ + crop_data->crop_mode |= CROP_ROTATE; + switch (strtoul(optarg, NULL, 0)) + { + case 90: crop_data->rotation = (uint16)90; + break; + case 180: crop_data->rotation = (uint16)180; + break; + case 270: crop_data->rotation = (uint16)270; + break; + default: TIFFError ("Rotation must be 90, 180, or 270 degrees clockwise", "%s", optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + break; + case 'S': /* subdivide into Cols:Rows sections, eg 3:2 would be 3 across and 2 down */ + sep = strpbrk(optarg, ",:"); + if (sep) + { + *sep = '\0'; + page->cols = atoi(optarg); + page->rows = atoi(sep +1); + } + else + { + page->cols = atoi(optarg); + page->rows = atoi(optarg); + } + if ((page->cols * page->rows) > MAX_SECTIONS) + { + TIFFError ("Limit for subdivisions, ie rows x columns, exceeded", "%d", MAX_SECTIONS); + exit (-1); + } + page->mode |= PAGE_MODE_ROWSCOLS; + break; + case 'U': /* units for measurements and offsets */ + if (streq(optarg, "in")) + { + crop_data->res_unit = RESUNIT_INCH; + page->res_unit = RESUNIT_INCH; + } + else if (streq(optarg, "cm")) + { + crop_data->res_unit = RESUNIT_CENTIMETER; + page->res_unit = RESUNIT_CENTIMETER; + } + else if (streq(optarg, "px")) + { + crop_data->res_unit = RESUNIT_NONE; + page->res_unit = RESUNIT_NONE; + } + else + { + TIFFError ("Illegal unit of measure","%s", optarg); + TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + } + break; + case 'V': /* set vertical resolution to new value */ + page->vres = atof (optarg); + page->mode |= PAGE_MODE_RESOLUTION; + break; + case 'X': /* selection width */ + crop_data->crop_mode |= CROP_WIDTH; + crop_data->width = atof(optarg); + break; + case 'Y': /* selection length */ + crop_data->crop_mode |= CROP_LENGTH; + crop_data->length = atof(optarg); + break; + case 'Z': /* zones of an image X:Y read as zone X of Y */ + crop_data->crop_mode |= CROP_ZONES; + for (i = 0, opt_ptr = strtok (optarg, ","); + ((opt_ptr != NULL) && (i < MAX_REGIONS)); + (opt_ptr = strtok (NULL, ",")), i++) + { + crop_data->zones++; + opt_offset = strchr(opt_ptr, ':'); + *opt_offset = '\0'; + crop_data->zonelist[i].position = atoi(opt_ptr); + crop_data->zonelist[i].total = atoi(opt_offset + 1); + } + /* check for remaining elements over MAX_REGIONS */ + if ((opt_ptr != NULL) && (i >= MAX_REGIONS)) + { + TIFFError("Zone list exceeds region limit", "%d", MAX_REGIONS); + exit (-1); + } + break; + case '?': TIFFError ("For valid options type", "tiffcrop -h"); + exit (-1); + /*NOTREACHED*/ + } + } + } /* end process_command_opts */ + +/* Start a new output file if one has not been previously opened or + * autoindex is set to non-zero. Update page and file counters + * so TIFFTAG PAGENUM will be correct in image. + */ +static int +update_output_file (TIFF **tiffout, char *mode, int autoindex, + char *outname, unsigned int *page) + { + static int findex = 0; /* file sequence indicator */ + char *sep; + char filenum[16]; + char export_ext[16]; + char exportname[PATH_MAX]; + + if (autoindex && (*tiffout != NULL)) + { + /* Close any export file that was previously opened */ + TIFFClose (*tiffout); + *tiffout = NULL; + } + + strcpy (export_ext, ".tiff"); + memset (exportname, '\0', PATH_MAX); + + /* Leave room for page number portion of the new filename */ + strncpy (exportname, outname, PATH_MAX - 16); + if (*tiffout == NULL) /* This is a new export file */ + { + if (autoindex) + { /* create a new filename for each export */ + findex++; + if ((sep = strstr(exportname, ".tif")) || (sep = strstr(exportname, ".TIF"))) + { + strncpy (export_ext, sep, 5); + *sep = '\0'; + } + else + strncpy (export_ext, ".tiff", 5); + export_ext[5] = '\0'; + + /* MAX_EXPORT_PAGES limited to 6 digits to prevent string overflow of pathname */ + if (findex > MAX_EXPORT_PAGES) + { + TIFFError("update_output_file", "Maximum of %d pages per file exceeded", MAX_EXPORT_PAGES); + return 1; + } + + sprintf (filenum, "-%03d%s", findex, export_ext); + filenum[14] = '\0'; + strncat (exportname, filenum, 15); + } + exportname[PATH_MAX - 1] = '\0'; + + *tiffout = TIFFOpen(exportname, mode); + if (*tiffout == NULL) + { + TIFFError("update_output_file", "Unable to open output file %s", exportname); + return 1; + } + *page = 0; + + return 0; + } + else + (*page)++; + + return 0; + } /* end update_output_file */ + + +int +main(int argc, char* argv[]) + { + extern int optind; + uint16 defconfig = (uint16) -1; + uint16 deffillorder = 0; + uint32 deftilewidth = (uint32) 0; + uint32 deftilelength = (uint32) 0; + uint32 defrowsperstrip = (uint32) 0; + uint32 dirnum = 0; + + TIFF *in = NULL; + TIFF *out = NULL; + char mode[10]; + char *mp = mode; + + /** RJN additions **/ + struct image_data image; /* Image parameters for one image */ + struct crop_mask crop; /* Cropping parameters for all images */ + struct pagedef page; /* Page definition for output pages */ + struct pageseg sections[MAX_SECTIONS]; /* Sections of one output page */ + struct buffinfo seg_buffs[MAX_SECTIONS]; /* Segment buffer sizes and pointers */ + struct dump_opts dump; /* Data dump options */ + unsigned char *read_buff = NULL; /* Input image data buffer */ + unsigned char *crop_buff = NULL; /* Crop area buffer */ + unsigned char *sect_buff = NULL; /* Image section buffer */ + unsigned char *sect_src = NULL; /* Image section buffer pointer */ + unsigned int imagelist[MAX_IMAGES + 1]; /* individually specified images */ + unsigned int image_count = 0; + unsigned int dump_images = 0; + unsigned int next_image = 0; + unsigned int next_page = 0; + unsigned int total_pages = 0; + unsigned int total_images = 0; + unsigned int end_of_input = FALSE; + int seg, length; + char temp_filename[PATH_MAX + 1]; + + little_endian = *((unsigned char *)&little_endian) & '1'; + + initImageData(&image); + initCropMasks(&crop); + initPageSetup(&page, sections, seg_buffs); + initDumpOptions(&dump); + + process_command_opts (argc, argv, mp, mode, &dirnum, &defconfig, + &deffillorder, &deftilewidth, &deftilelength, &defrowsperstrip, + &crop, &page, &dump, imagelist, &image_count); + + if (argc - optind < 2) + usage(); + + if ((argc - optind) == 2) + pageNum = -1; + else + total_images = 0; + /* read multiple input files and write to output file(s) */ + while (optind < argc - 1) + { + in = TIFFOpen (argv[optind], "r"); + if (in == NULL) + return (-3); + + /* If only one input file is specified, we can use directory count */ + total_images = TIFFNumberOfDirectories(in); + if (image_count == 0) + { + dirnum = 0; + total_pages = total_images; /* Only valid with single input file */ + } + else + { + dirnum = (tdir_t)(imagelist[next_image] - 1); + next_image++; + + /* Total pages only valid for enumerated list of pages not derived + * using odd, even, or last keywords. + */ + if (image_count > total_images) + image_count = total_images; + + total_pages = image_count; + } + + /* MAX_IMAGES is used for special case "last" in selection list */ + if (dirnum == (MAX_IMAGES - 1)) + dirnum = total_images - 1; + + if (dirnum > (total_images)) + { + TIFFError (TIFFFileName(in), + "Invalid image number %d, File contains only %d images", + (int)dirnum + 1, total_images); + if (out != NULL) + (void) TIFFClose(out); + return (1); + } + + if (dirnum != 0 && !TIFFSetDirectory(in, (tdir_t)dirnum)) + { + TIFFError(TIFFFileName(in),"Error, setting subdirectory at %d", dirnum); + if (out != NULL) + (void) TIFFClose(out); + return (1); + } + + end_of_input = FALSE; + while (end_of_input == FALSE) + { + config = defconfig; + compression = defcompression; + predictor = defpredictor; + fillorder = deffillorder; + rowsperstrip = defrowsperstrip; + tilewidth = deftilewidth; + tilelength = deftilelength; + g3opts = defg3opts; + + if (dump.format != DUMP_NONE) + { + /* manage input and/or output dump files here */ + dump_images++; + length = strlen(dump.infilename); + if (length > 0) + { + if (dump.infile != NULL) + fclose (dump.infile); + + /* dump.infilename is guaranteed to be NUL termimated and have 20 bytes + fewer than PATH_MAX */ + memset (temp_filename, '\0', PATH_MAX + 1); + sprintf (temp_filename, "%s-read-%03d.%s", dump.infilename, dump_images, + (dump.format == DUMP_TEXT) ? "txt" : "raw"); + if ((dump.infile = fopen(temp_filename, dump.mode)) == NULL) + { + TIFFError ("Unable to open dump file for writing", "%s", temp_filename); + exit (-1); + } + dump_info(dump.infile, dump.format, "Reading image","%d from %s", + dump_images, TIFFFileName(in)); + } + length = strlen(dump.outfilename); + if (length > 0) + { + if (dump.outfile != NULL) + fclose (dump.outfile); + + /* dump.outfilename is guaranteed to be NUL termimated and have 20 bytes + fewer than PATH_MAX */ + memset (temp_filename, '\0', PATH_MAX + 1); + sprintf (temp_filename, "%s-write-%03d.%s", dump.outfilename, dump_images, + (dump.format == DUMP_TEXT) ? "txt" : "raw"); + if ((dump.outfile = fopen(temp_filename, dump.mode)) == NULL) + { + TIFFError ("Unable to open dump file for writing", "%s", temp_filename); + exit (-1); + } + dump_info(dump.outfile, dump.format, "Writing image","%d from %s", + dump_images, TIFFFileName(in)); + } + } + + if (dump.debug) + TIFFError("main", "Reading image %4d of %4d total pages.", dirnum + 1, total_pages); + + if (loadImage(in, &image, &dump, &read_buff)) + { + TIFFError("main", "Unable to load source image"); + exit (-1); + } + + /* Correct the image orientation if it was not ORIENTATION_TOPLEFT. + */ + if (image.adjustments != 0) + { + if (correct_orientation(&image, &read_buff)) + TIFFError("main", "Unable to correct image orientation"); + } + + if (getCropOffsets(&image, &crop, &dump)) + { + TIFFError("main", "Unable to define crop regions"); + exit (-1); + } + + if (crop.selections > 0) + { + if (processCropSelections(&image, &crop, &read_buff, seg_buffs)) + { + TIFFError("main", "Unable to process image selections"); + exit (-1); + } + } + else /* Single image segment without zones or regions */ + { + if (createCroppedImage(&image, &crop, &read_buff, &crop_buff)) + { + TIFFError("main", "Unable to create output image"); + exit (-1); + } + } + if (page.mode == PAGE_MODE_NONE) + { /* Whole image or sections not based on output page size */ + if (crop.selections > 0) + { + writeSelections(in, &out, &crop, &image, &dump, seg_buffs, + mp, argv[argc - 1], &next_page, total_pages); + } + else /* One file all images and sections */ + { + if (update_output_file (&out, mp, crop.exp_mode, argv[argc - 1], + &next_page)) + exit (1); + if (writeCroppedImage(in, out, &image, &dump,crop.combined_width, + crop.combined_length, crop_buff, next_page, total_pages)) + { + TIFFError("main", "Unable to write new image"); + exit (-1); + } + } + } + else + { + /* If we used a crop buffer, our data is there, otherwise it is + * in the read_buffer + */ + if (crop_buff != NULL) + sect_src = crop_buff; + else + sect_src = read_buff; + /* Break input image into pages or rows and columns */ + if (computeOutputPixelOffsets(&crop, &image, &page, sections, &dump)) + { + TIFFError("main", "Unable to compute output section data"); + exit (-1); + } + /* If there are multiple files on the command line, the final one is assumed + * to be the output filename into which the images are written. + */ + if (update_output_file (&out, mp, crop.exp_mode, argv[argc - 1], &next_page)) + exit (1); + + if (writeImageSections(in, out, &image, &page, sections, &dump, sect_src, §_buff)) + { + TIFFError("main", "Unable to write image sections"); + exit (-1); + } + } + + /* No image list specified, just read the next image */ + if (image_count == 0) + dirnum++; + else + { + dirnum = (tdir_t)(imagelist[next_image] - 1); + next_image++; + } + + if (dirnum == MAX_IMAGES - 1) + dirnum = TIFFNumberOfDirectories(in) - 1; + + if (!TIFFSetDirectory(in, (tdir_t)dirnum)) + end_of_input = TRUE; + } + TIFFClose(in); + optind++; + } + + /* If we did not use the read buffer as the crop buffer */ + if (read_buff) + _TIFFfree(read_buff); + + if (crop_buff) + _TIFFfree(crop_buff); + + if (sect_buff) + _TIFFfree(sect_buff); + + /* Clean up any segment buffers used for zones or regions */ + for (seg = 0; seg < crop.selections; seg++) + _TIFFfree (seg_buffs[seg].buffer); + + if (dump.format != DUMP_NONE) + { + if (dump.infile != NULL) + fclose (dump.infile); + + if (dump.outfile != NULL) + { + dump_info (dump.outfile, dump.format, "", "Completed run for %s", TIFFFileName(out)); + fclose (dump.outfile); + } + } + + TIFFClose(out); + + return (0); + } /* end main */ + + +/* Debugging functions */ +static int dump_data (FILE *dumpfile, int format, char *dump_tag, unsigned char *data, uint32 count) + { + int j, k; + uint32 i; + char dump_array[10]; + unsigned char bitset; + + if (dumpfile == NULL) + { + TIFFError ("", "Invalid FILE pointer for dump file"); + return (1); + } + + if (format == DUMP_TEXT) + { + fprintf (dumpfile," %s ", dump_tag); + for (i = 0; i < count; i++) + { + for (j = 0, k = 7; j < 8; j++, k--) + { + bitset = (*(data + i)) & (((unsigned char)1 << k)) ? 1 : 0; + sprintf(&dump_array[j], (bitset) ? "1" : "0"); + } + dump_array[8] = '\0'; + fprintf (dumpfile," %s", dump_array); + } + fprintf (dumpfile,"\n"); + } + else + { + if ((fwrite (data, 1, count, dumpfile)) != count) + { + TIFFError ("", "Unable to write binary data to dump file"); + return (1); + } + } + + return (0); + } + +static int dump_byte (FILE *dumpfile, int format, char *dump_tag, unsigned char data) + { + int j, k; + char dump_array[10]; + unsigned char bitset; + + if (dumpfile == NULL) + { + TIFFError ("", "Invalid FILE pointer for dump file"); + return (1); + } + + if (format == DUMP_TEXT) + { + fprintf (dumpfile," %s ", dump_tag); + for (j = 0, k = 7; j < 8; j++, k--) + { + bitset = data & (((unsigned char)1 << k)) ? 1 : 0; + sprintf(&dump_array[j], (bitset) ? "1" : "0"); + } + dump_array[8] = '\0'; + fprintf (dumpfile," %s\n", dump_array); + } + else + { + if ((fwrite (&data, 1, 1, dumpfile)) != 1) + { + TIFFError ("", "Unable to write binary data to dump file"); + return (1); + } + } + + return (0); + } + +static int dump_short (FILE *dumpfile, int format, char *dump_tag, uint16 data) + { + int j, k; + char dump_array[20]; + unsigned char bitset; + + if (dumpfile == NULL) + { + TIFFError ("", "Invalid FILE pointer for dump file"); + return (1); + } + + if (format == DUMP_TEXT) + { + fprintf (dumpfile," %s ", dump_tag); + for (j = 0, k = 15; k >= 0; j++, k--) + { + bitset = data & (((unsigned char)1 << k)) ? 1 : 0; + sprintf(&dump_array[j], (bitset) ? "1" : "0"); + if ((k % 8) == 0) + sprintf(&dump_array[++j], " "); + } + dump_array[17] = '\0'; + fprintf (dumpfile," %s\n", dump_array); + } + else + { + if ((fwrite (&data, 2, 1, dumpfile)) != 2) + { + TIFFError ("", "Unable to write binary data to dump file"); + return (1); + } + } + + return (0); + } + +static int dump_long (FILE *dumpfile, int format, char *dump_tag, uint32 data) + { + int j, k; + char dump_array[40]; + unsigned char bitset; + + if (dumpfile == NULL) + { + TIFFError ("", "Invalid FILE pointer for dump file"); + return (1); + } + + if (format == DUMP_TEXT) + { + fprintf (dumpfile," %s ", dump_tag); + for (j = 0, k = 31; k >= 0; j++, k--) + { + bitset = data & (((uint32)1 << k)) ? 1 : 0; + sprintf(&dump_array[j], (bitset) ? "1" : "0"); + if ((k % 8) == 0) + sprintf(&dump_array[++j], " "); + } + dump_array[35] = '\0'; + fprintf (dumpfile," %s\n", dump_array); + } + else + { + if ((fwrite (&data, 4, 1, dumpfile)) != 4) + { + TIFFError ("", "Unable to write binary data to dump file"); + return (1); + } + } + return (0); + } + +static int dump_wide (FILE *dumpfile, int format, char *dump_tag, uint64 data) + { + int j, k; + char dump_array[80]; + unsigned char bitset; + + if (dumpfile == NULL) + { + TIFFError ("", "Invalid FILE pointer for dump file"); + return (1); + } + + if (format == DUMP_TEXT) + { + fprintf (dumpfile," %s ", dump_tag); + for (j = 0, k = 63; k >= 0; j++, k--) + { + bitset = data & (((uint64)1 << k)) ? 1 : 0; + sprintf(&dump_array[j], (bitset) ? "1" : "0"); + if ((k % 8) == 0) + sprintf(&dump_array[++j], " "); + } + dump_array[71] = '\0'; + fprintf (dumpfile," %s\n", dump_array); + } + else + { + if ((fwrite (&data, 8, 1, dumpfile)) != 8) + { + TIFFError ("", "Unable to write binary data to dump file"); + return (1); + } + } + + return (0); + } + +static void dump_info(FILE *dumpfile, int format, char *prefix, char *msg, ...) + { + if (format == DUMP_TEXT) + { + va_list ap; + va_start(ap, msg); + fprintf(dumpfile, "%s ", prefix); + vfprintf(dumpfile, msg, ap); + fprintf(dumpfile, "\n"); + } + } + +static int dump_buffer (FILE* dumpfile, int format, uint32 rows, uint32 width, + uint32 row, unsigned char *buff) + { + int j, k; + uint32 i; + unsigned char * dump_ptr; + + if (dumpfile == NULL) + { + TIFFError ("", "Invalid FILE pointer for dump file"); + return (1); + } + + for (i = 0; i < rows; i++) + { + dump_ptr = buff + (i * width); + if (format == DUMP_TEXT) + dump_info (dumpfile, format, "", + "Row %4d, %d bytes at offset %d", + row + i + 1, width, row * width); + + for (j = 0, k = width; k >= 10; j += 10, k -= 10, dump_ptr += 10) + dump_data (dumpfile, format, "", dump_ptr, 10); + if (k > 0) + dump_data (dumpfile, format, "", dump_ptr, k); + } + return (0); + } + +/* Extract one or more samples from an interleaved buffer. If count == 1, + * only the sample plane indicated by sample will be extracted. If count > 1, + * count samples beginning at sample will be extracted. Portions of a + * scanline can be extracted by specifying a start and end value. + */ + +static int +extractContigSamplesBytes (uint8 *in, uint8 *out, uint32 cols, + tsample_t sample, uint16 spp, uint16 bps, + tsample_t count, uint32 start, uint32 end) + { + int i, bytes_per_sample, sindex; + uint32 col, dst_rowsize, bit_offset; + uint32 src_byte, src_bit; + uint8 *src = in; + uint8 *dst = out; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("extractContigSamplesBytes","Invalid input or output buffer"); + return (1); + } + + if ((start > end) || (start > cols)) + { + TIFFError ("extractContigSamplesBytes", + "Invalid start column value %d ignored", start); + start = 0; + } + if ((end == 0) || (end > cols)) + { + TIFFError ("extractContigSamplesBytes", + "Invalid end column value %d ignored", end); + end = cols; + } + + dst_rowsize = (bps * (end - start) * count) / 8; + + bytes_per_sample = (bps + 7) / 8; + /* Optimize case for copying all samples */ + if (count == spp) + { + src = in + (start * spp * bytes_per_sample); + _TIFFmemcpy (dst, src, dst_rowsize); + } + else + { + for (col = start; col < end; col++) + { + for (sindex = sample; (sindex < spp) && (sindex < (sample + count)); sindex++) + { + bit_offset = col * bps * spp; + if (sindex == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sindex * bps)) / 8; + src_bit = (bit_offset + (sindex * bps)) % 8; + } + src = in + src_byte; + for (i = 0; i < bytes_per_sample; i++) + *dst++ = *src++; + } + } + } + + return (0); + } /* end extractContigSamplesBytes */ + +static int +extractContigSamples8bits (uint8 *in, uint8 *out, uint32 cols, + tsample_t sample, uint16 spp, uint16 bps, + tsample_t count, uint32 start, uint32 end) + { + int ready_bits = 0, sindex = 0; + uint32 col, src_byte, src_bit, bit_offset; + uint8 maskbits = 0, matchbits = 0; + uint8 buff1 = 0, buff2 = 0; + uint8 *src = in; + uint8 *dst = out; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("extractContigSamples8bits","Invalid input or output buffer"); + return (1); + } + + if ((start > end) || (start > cols)) + { + TIFFError ("extractContigSamples8bits", + "Invalid start column value %d ignored", start); + start = 0; + } + if ((end == 0) || (end > cols)) + { + TIFFError ("extractContigSamples8bits", + "Invalid end column value %d ignored", end); + end = cols; + } + + ready_bits = 0; + maskbits = (uint8)-1 >> ( 8 - bps); + buff1 = buff2 = 0; + for (col = start; col < end; col++) + { /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps * spp; + for (sindex = sample; (sindex < spp) && (sindex < (sample + count)); sindex++) + { + if (sindex == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sindex * bps)) / 8; + src_bit = (bit_offset + (sindex * bps)) % 8; + } + + src = in + src_byte; + matchbits = maskbits << (8 - src_bit - bps); + buff1 = ((*src) & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 8) + { + *dst++ = buff2; + buff2 = buff1; + ready_bits -= 8; + } + else + buff2 = (buff2 | (buff1 >> ready_bits)); + ready_bits += bps; + } + } + + while (ready_bits > 0) + { + buff1 = (buff2 & ((unsigned int)255 << (8 - ready_bits))); + *dst++ = buff1; + ready_bits -= 8; + } + + return (0); + } /* end extractContigSamples8bits */ + +static int +extractContigSamples16bits (uint8 *in, uint8 *out, uint32 cols, + tsample_t sample, uint16 spp, uint16 bps, + tsample_t count, uint32 start, uint32 end) + { + int ready_bits = 0, sindex = 0; + uint32 col, src_byte, src_bit, bit_offset; + uint16 maskbits = 0, matchbits = 0; + uint16 buff1 = 0, buff2 = 0; + uint8 bytebuff = 0; + uint8 *src = in; + uint8 *dst = out; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("extractContigSamples16bits","Invalid input or output buffer"); + return (1); + } + + if ((start > end) || (start > cols)) + { + TIFFError ("extractContigSamples16bits", + "Invalid start column value %d ignored", start); + start = 0; + } + if ((end == 0) || (end > cols)) + { + TIFFError ("extractContigSamples16bits", + "Invalid end column value %d ignored", end); + end = cols; + } + + ready_bits = 0; + maskbits = (uint16)-1 >> (16 - bps); + + for (col = start; col < end; col++) + { /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps * spp; + for (sindex = sample; (sindex < spp) && (sindex < (sample + count)); sindex++) + { + if (sindex == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sindex * bps)) / 8; + src_bit = (bit_offset + (sindex * bps)) % 8; + } + + src = in + src_byte; + matchbits = maskbits << (16 - src_bit - bps); + + if (little_endian) + buff1 = (src[0] << 8) | src[1]; + else + buff1 = (src[1] << 8) | src[0]; + + buff1 = (buff1 & matchbits) << (src_bit); + if (ready_bits < 8) /* add another bps bits to the buffer */ + { + bytebuff = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + } + else /* If we have a full buffer's worth, write it out */ + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + ready_bits -= 8; + /* shift in new bits */ + buff2 = ((buff2 << 8) | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + + /* catch any trailing bits at the end of the line */ + while (ready_bits > 0) + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + ready_bits -= 8; + } + + return (0); + } /* end extractContigSamples16bits */ + + +static int +extractContigSamples24bits (uint8 *in, uint8 *out, uint32 cols, + tsample_t sample, uint16 spp, uint16 bps, + tsample_t count, uint32 start, uint32 end) + { + int ready_bits = 0, sindex = 0; + uint32 col, src_byte, src_bit, bit_offset; + uint32 maskbits = 0, matchbits = 0; + uint32 buff1 = 0, buff2 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0; + uint8 *src = in; + uint8 *dst = out; + + if ((in == NULL) || (out == NULL)) + { + TIFFError("extractContigSamples24bits","Invalid input or output buffer"); + return (1); + } + + if ((start > end) || (start > cols)) + { + TIFFError ("extractContigSamples24bits", + "Invalid start column value %d ignored", start); + start = 0; + } + if ((end == 0) || (end > cols)) + { + TIFFError ("extractContigSamples24bits", + "Invalid end column value %d ignored", end); + end = cols; + } + + ready_bits = 0; + maskbits = (uint32)-1 >> ( 32 - bps); + for (col = start; col < end; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps * spp; + for (sindex = sample; (sindex < spp) && (sindex < (sample + count)); sindex++) + { + if (sindex == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sindex * bps)) / 8; + src_bit = (bit_offset + (sindex * bps)) % 8; + } + + src = in + src_byte; + matchbits = maskbits << (32 - src_bit - bps); + if (little_endian) + buff1 = (src[0] << 24) | (src[1] << 16) | (src[2] << 8) | src[3]; + else + buff1 = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0]; + buff1 = (buff1 & matchbits) << (src_bit); + + if (ready_bits < 16) /* add another bps bits to the buffer */ + { + bytebuff1 = bytebuff2 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + } + else /* If we have a full buffer's worth, write it out */ + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 16); + *dst++ = bytebuff2; + ready_bits -= 16; + + /* shift in new bits */ + buff2 = ((buff2 << 16) | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + + /* catch any trailing bits at the end of the line */ + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + + buff2 = (buff2 << 8); + bytebuff2 = bytebuff1; + ready_bits -= 8; + } + + return (0); + } /* end extractContigSamples24bits */ + +static int +extractContigSamples32bits (uint8 *in, uint8 *out, uint32 cols, + tsample_t sample, uint16 spp, uint16 bps, + tsample_t count, uint32 start, uint32 end) + { + int ready_bits = 0, sindex = 0, shift_width = 0; + uint32 col, src_byte, src_bit, bit_offset; + uint32 longbuff1 = 0, longbuff2 = 0; + uint64 maskbits = 0, matchbits = 0; + uint64 buff1 = 0, buff2 = 0, buff3 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0, bytebuff3 = 0, bytebuff4 = 0; + uint8 *src = in; + uint8 *dst = out; + + if ((in == NULL) || (out == NULL)) + { + TIFFError("extractContigSamples32bits","Invalid input or output buffer"); + return (1); + } + + + if ((start > end) || (start > cols)) + { + TIFFError ("extractContigSamples32bits", + "Invalid start column value %d ignored", start); + start = 0; + } + if ((end == 0) || (end > cols)) + { + TIFFError ("extractContigSamples32bits", + "Invalid end column value %d ignored", end); + end = cols; + } + + shift_width = ((bps + 7) / 8) + 1; + ready_bits = 0; + maskbits = (uint64)-1 >> ( 64 - bps); + for (col = start; col < end; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps * spp; + for (sindex = sample; (sindex < spp) && (sindex < (sample + count)); sindex++) + { + if (sindex == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sindex * bps)) / 8; + src_bit = (bit_offset + (sindex * bps)) % 8; + } + + src = in + src_byte; + matchbits = maskbits << (64 - src_bit - bps); + if (little_endian) + { + longbuff1 = (src[0] << 24) | (src[1] << 16) | (src[2] << 8) | src[3]; + longbuff2 = longbuff1; + } + else + { + longbuff1 = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0]; + longbuff2 = longbuff1; + } + + buff3 = ((uint64)longbuff1 << 32) | longbuff2; + buff1 = (buff3 & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 32) + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 48); + *dst++ = bytebuff2; + bytebuff3 = (buff2 >> 40); + *dst++ = bytebuff3; + bytebuff4 = (buff2 >> 32); + *dst++ = bytebuff4; + ready_bits -= 32; + + /* shift in new bits */ + buff2 = ((buff2 << 32) | (buff1 >> ready_bits)); + } + else + { /* add another bps bits to the buffer */ + bytebuff1 = bytebuff2 = bytebuff3 = bytebuff4 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + buff2 = (buff2 << 8); + ready_bits -= 8; + } + + return (0); + } /* end extractContigSamples32bits */ + +static int +extractContigSamplesShifted8bits (uint8 *in, uint8 *out, uint32 cols, + tsample_t sample, uint16 spp, uint16 bps, + tsample_t count, uint32 start, uint32 end, + int shift) + { + int ready_bits = 0, sindex = 0; + uint32 col, src_byte, src_bit, bit_offset; + uint8 maskbits = 0, matchbits = 0; + uint8 buff1 = 0, buff2 = 0; + uint8 *src = in; + uint8 *dst = out; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("extractContigSamplesShifted8bits","Invalid input or output buffer"); + return (1); + } + + if ((start > end) || (start > cols)) + { + TIFFError ("extractContigSamplesShifted8bits", + "Invalid start column value %d ignored", start); + start = 0; + } + if ((end == 0) || (end > cols)) + { + TIFFError ("extractContigSamplesShifted8bits", + "Invalid end column value %d ignored", end); + end = cols; + } + + ready_bits = shift; + maskbits = (uint8)-1 >> ( 8 - bps); + buff1 = buff2 = 0; + for (col = start; col < end; col++) + { /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps * spp; + for (sindex = sample; (sindex < spp) && (sindex < (sample + count)); sindex++) + { + if (sindex == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sindex * bps)) / 8; + src_bit = (bit_offset + (sindex * bps)) % 8; + } + + src = in + src_byte; + matchbits = maskbits << (8 - src_bit - bps); + buff1 = ((*src) & matchbits) << (src_bit); + if ((col == start) && (sindex == sample)) + buff2 = *src & ((uint8)-1) << (shift); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 8) + { + *dst++ |= buff2; + buff2 = buff1; + ready_bits -= 8; + } + else + buff2 = buff2 | (buff1 >> ready_bits); + ready_bits += bps; + } + } + + while (ready_bits > 0) + { + buff1 = (buff2 & ((unsigned int)255 << (8 - ready_bits))); + *dst++ = buff1; + ready_bits -= 8; + } + + return (0); + } /* end extractContigSamplesShifted8bits */ + +static int +extractContigSamplesShifted16bits (uint8 *in, uint8 *out, uint32 cols, + tsample_t sample, uint16 spp, uint16 bps, + tsample_t count, uint32 start, uint32 end, + int shift) + { + int ready_bits = 0, sindex = 0; + uint32 col, src_byte, src_bit, bit_offset; + uint16 maskbits = 0, matchbits = 0; + uint16 buff1 = 0, buff2 = 0; + uint8 bytebuff = 0; + uint8 *src = in; + uint8 *dst = out; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("extractContigSamplesShifted16bits","Invalid input or output buffer"); + return (1); + } + + if ((start > end) || (start > cols)) + { + TIFFError ("extractContigSamplesShifted16bits", + "Invalid start column value %d ignored", start); + start = 0; + } + if ((end == 0) || (end > cols)) + { + TIFFError ("extractContigSamplesShifted16bits", + "Invalid end column value %d ignored", end); + end = cols; + } + + ready_bits = shift; + maskbits = (uint16)-1 >> (16 - bps); + for (col = start; col < end; col++) + { /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps * spp; + for (sindex = sample; (sindex < spp) && (sindex < (sample + count)); sindex++) + { + if (sindex == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sindex * bps)) / 8; + src_bit = (bit_offset + (sindex * bps)) % 8; + } + + src = in + src_byte; + matchbits = maskbits << (16 - src_bit - bps); + if (little_endian) + buff1 = (src[0] << 8) | src[1]; + else + buff1 = (src[1] << 8) | src[0]; + + if ((col == start) && (sindex == sample)) + buff2 = buff1 & ((uint16)-1) << (8 - shift); + + buff1 = (buff1 & matchbits) << (src_bit); + + if (ready_bits < 8) /* add another bps bits to the buffer */ + buff2 = buff2 | (buff1 >> ready_bits); + else /* If we have a full buffer's worth, write it out */ + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + ready_bits -= 8; + /* shift in new bits */ + buff2 = ((buff2 << 8) | (buff1 >> ready_bits)); + } + + ready_bits += bps; + } + } + + /* catch any trailing bits at the end of the line */ + while (ready_bits > 0) + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + ready_bits -= 8; + } + + return (0); + } /* end extractContigSamplesShifted16bits */ + + +static int +extractContigSamplesShifted24bits (uint8 *in, uint8 *out, uint32 cols, + tsample_t sample, uint16 spp, uint16 bps, + tsample_t count, uint32 start, uint32 end, + int shift) + { + int ready_bits = 0, sindex = 0; + uint32 col, src_byte, src_bit, bit_offset; + uint32 maskbits = 0, matchbits = 0; + uint32 buff1 = 0, buff2 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0; + uint8 *src = in; + uint8 *dst = out; + + if ((in == NULL) || (out == NULL)) + { + TIFFError("extractContigSamplesShifted24bits","Invalid input or output buffer"); + return (1); + } + + if ((start > end) || (start > cols)) + { + TIFFError ("extractContigSamplesShifted24bits", + "Invalid start column value %d ignored", start); + start = 0; + } + if ((end == 0) || (end > cols)) + { + TIFFError ("extractContigSamplesShifted24bits", + "Invalid end column value %d ignored", end); + end = cols; + } + + ready_bits = shift; + maskbits = (uint32)-1 >> ( 32 - bps); + for (col = start; col < end; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps * spp; + for (sindex = sample; (sindex < spp) && (sindex < (sample + count)); sindex++) + { + if (sindex == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sindex * bps)) / 8; + src_bit = (bit_offset + (sindex * bps)) % 8; + } + + src = in + src_byte; + matchbits = maskbits << (32 - src_bit - bps); + if (little_endian) + buff1 = (src[0] << 24) | (src[1] << 16) | (src[2] << 8) | src[3]; + else + buff1 = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0]; + + if ((col == start) && (sindex == sample)) + buff2 = buff1 & ((uint32)-1) << (16 - shift); + + buff1 = (buff1 & matchbits) << (src_bit); + + if (ready_bits < 16) /* add another bps bits to the buffer */ + { + bytebuff1 = bytebuff2 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + } + else /* If we have a full buffer's worth, write it out */ + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 16); + *dst++ = bytebuff2; + ready_bits -= 16; + + /* shift in new bits */ + buff2 = ((buff2 << 16) | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + + /* catch any trailing bits at the end of the line */ + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + + buff2 = (buff2 << 8); + bytebuff2 = bytebuff1; + ready_bits -= 8; + } + + return (0); + } /* end extractContigSamplesShifted24bits */ + +static int +extractContigSamplesShifted32bits (uint8 *in, uint8 *out, uint32 cols, + tsample_t sample, uint16 spp, uint16 bps, + tsample_t count, uint32 start, uint32 end, + int shift) + { + int ready_bits = 0, sindex = 0, shift_width = 0; + uint32 col, src_byte, src_bit, bit_offset; + uint32 longbuff1 = 0, longbuff2 = 0; + uint64 maskbits = 0, matchbits = 0; + uint64 buff1 = 0, buff2 = 0, buff3 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0, bytebuff3 = 0, bytebuff4 = 0; + uint8 *src = in; + uint8 *dst = out; + + if ((in == NULL) || (out == NULL)) + { + TIFFError("extractContigSamplesShifted32bits","Invalid input or output buffer"); + return (1); + } + + + if ((start > end) || (start > cols)) + { + TIFFError ("extractContigSamplesShifted32bits", + "Invalid start column value %d ignored", start); + start = 0; + } + if ((end == 0) || (end > cols)) + { + TIFFError ("extractContigSamplesShifted32bits", + "Invalid end column value %d ignored", end); + end = cols; + } + + shift_width = ((bps + 7) / 8) + 1; + ready_bits = shift; + maskbits = (uint64)-1 >> ( 64 - bps); + for (col = start; col < end; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps * spp; + for (sindex = sample; (sindex < spp) && (sindex < (sample + count)); sindex++) + { + if (sindex == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sindex * bps)) / 8; + src_bit = (bit_offset + (sindex * bps)) % 8; + } + + src = in + src_byte; + matchbits = maskbits << (64 - src_bit - bps); + if (little_endian) + { + longbuff1 = (src[0] << 24) | (src[1] << 16) | (src[2] << 8) | src[3]; + longbuff2 = longbuff1; + } + else + { + longbuff1 = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0]; + longbuff2 = longbuff1; + } + + buff3 = ((uint64)longbuff1 << 32) | longbuff2; + if ((col == start) && (sindex == sample)) + buff2 = buff3 & ((uint64)-1) << (32 - shift); + + buff1 = (buff3 & matchbits) << (src_bit); + + if (ready_bits < 32) + { /* add another bps bits to the buffer */ + bytebuff1 = bytebuff2 = bytebuff3 = bytebuff4 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + } + else /* If we have a full buffer's worth, write it out */ + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 48); + *dst++ = bytebuff2; + bytebuff3 = (buff2 >> 40); + *dst++ = bytebuff3; + bytebuff4 = (buff2 >> 32); + *dst++ = bytebuff4; + ready_bits -= 32; + + /* shift in new bits */ + buff2 = ((buff2 << 32) | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + buff2 = (buff2 << 8); + ready_bits -= 8; + } + + return (0); + } /* end extractContigSamplesShifted32bits */ + +static int +extractContigSamplesToBuffer(uint8 *out, uint8 *in, uint32 rows, uint32 cols, + tsample_t sample, uint16 spp, uint16 bps, + struct dump_opts *dump) + { + int shift_width, bytes_per_sample, bytes_per_pixel; + uint32 src_rowsize, src_offset, row, first_col = 0; + uint32 dst_rowsize, dst_offset; + tsample_t count = 1; + uint8 *src, *dst; + + bytes_per_sample = (bps + 7) / 8; + bytes_per_pixel = ((bps * spp) + 7) / 8; + if ((bps % 8) == 0) + shift_width = 0; + else + { + if (bytes_per_pixel < (bytes_per_sample + 1)) + shift_width = bytes_per_pixel; + else + shift_width = bytes_per_sample + 1; + } + src_rowsize = ((bps * spp * cols) + 7) / 8; + dst_rowsize = ((bps * cols) + 7) / 8; + + if ((dump->outfile != NULL) && (dump->level == 4)) + { + dump_info (dump->outfile, dump->format, "extractContigSamplesToBuffer", + "Sample %d, %d rows", sample + 1, rows + 1); + } + for (row = 0; row < rows; row++) + { + src_offset = row * src_rowsize; + dst_offset = row * dst_rowsize; + src = in + src_offset; + dst = out + dst_offset; + + /* pack the data into the scanline */ + switch (shift_width) + { + case 0: if (extractContigSamplesBytes (src, dst, cols, sample, + spp, bps, count, first_col, cols)) + return (1); + break; + case 1: if (bps == 1) + { + if (extractContigSamples8bits (src, dst, cols, sample, + spp, bps, count, first_col, cols)) + return (1); + break; + } + else + if (extractContigSamples16bits (src, dst, cols, sample, + spp, bps, count, first_col, cols)) + return (1); + break; + case 2: if (extractContigSamples24bits (src, dst, cols, sample, + spp, bps, count, first_col, cols)) + return (1); + break; + case 3: + case 4: + case 5: if (extractContigSamples32bits (src, dst, cols, sample, + spp, bps, count, first_col, cols)) + return (1); + break; + default: TIFFError ("extractContigSamplesToBuffer", "Unsupported bit depth: %d", bps); + return (1); + } + if ((dump->outfile != NULL) && (dump->level == 4)) + dump_buffer(dump->outfile, dump->format, 1, dst_rowsize, row, dst); + } + + return (0); + } /* end extractContigSamplesToBuffer */ + +static int +extractContigSamplesToTileBuffer(uint8 *out, uint8 *in, uint32 rows, uint32 cols, + uint32 imagewidth, uint32 tilewidth, tsample_t sample, + uint16 count, uint16 spp, uint16 bps, struct dump_opts *dump) + { + int shift_width, bytes_per_sample, bytes_per_pixel; + uint32 src_rowsize, src_offset, row; + uint32 dst_rowsize, dst_offset; + uint8 *src, *dst; + + bytes_per_sample = (bps + 7) / 8; + bytes_per_pixel = ((bps * spp) + 7) / 8; + if ((bps % 8) == 0) + shift_width = 0; + else + { + if (bytes_per_pixel < (bytes_per_sample + 1)) + shift_width = bytes_per_pixel; + else + shift_width = bytes_per_sample + 1; + } + + if ((dump->outfile != NULL) && (dump->level == 4)) + { + dump_info (dump->outfile, dump->format, "extractContigSamplesToTileBuffer", + "Sample %d, %d rows", sample + 1, rows + 1); + } + + src_rowsize = ((bps * spp * imagewidth) + 7) / 8; + dst_rowsize = ((bps * tilewidth * count) + 7) / 8; + + for (row = 0; row < rows; row++) + { + src_offset = row * src_rowsize; + dst_offset = row * dst_rowsize; + src = in + src_offset; + dst = out + dst_offset; + + /* pack the data into the scanline */ + switch (shift_width) + { + case 0: if (extractContigSamplesBytes (src, dst, cols, sample, + spp, bps, count, 0, cols)) + return (1); + break; + case 1: if (bps == 1) + { + if (extractContigSamples8bits (src, dst, cols, sample, + spp, bps, count, 0, cols)) + return (1); + break; + } + else + if (extractContigSamples16bits (src, dst, cols, sample, + spp, bps, count, 0, cols)) + return (1); + break; + case 2: if (extractContigSamples24bits (src, dst, cols, sample, + spp, bps, count, 0, cols)) + return (1); + break; + case 3: + case 4: + case 5: if (extractContigSamples32bits (src, dst, cols, sample, + spp, bps, count, 0, cols)) + return (1); + break; + default: TIFFError ("extractContigSamplesToTileBuffer", "Unsupported bit depth: %d", bps); + return (1); + } + if ((dump->outfile != NULL) && (dump->level == 4)) + dump_buffer(dump->outfile, dump->format, 1, dst_rowsize, row, dst); + } + + return (0); + } /* end extractContigSamplesToTileBuffer */ + +static int readContigStripsIntoBuffer (TIFF* in, uint8* buf) + { + uint8* bufp = buf; + int32 bytes_read = 0; + uint16 strip, nstrips = TIFFNumberOfStrips(in); + uint32 stripsize = TIFFStripSize(in); + uint32 rows = 0; + uint32 rps = TIFFGetFieldDefaulted(in, TIFFTAG_ROWSPERSTRIP, &rps); + tsize_t scanline_size = TIFFScanlineSize(in); + + for (strip = 0; strip < nstrips; strip++) + { + bytes_read = TIFFReadEncodedStrip (in, strip, bufp, -1); + rows = bytes_read / scanline_size; + if ((strip < (nstrips - 1)) && (bytes_read != (int32)stripsize)) + TIFFError("", "Strip %d: read %lu bytes, strip size %lu", + (int)strip + 1, (unsigned long) bytes_read, (unsigned long)stripsize); + + if (bytes_read < 0 && !ignore) + { + TIFFError("", "Error reading strip %lu after %lu rows", + (unsigned long) strip, (unsigned long)rows); + return 0; + } + bufp += bytes_read; + } + + return 1; + } /* end readContigStripsIntoBuffer */ + +static int +combineSeparateSamplesBytes (unsigned char *srcbuffs[], unsigned char *out, + uint32 cols, uint32 rows, uint16 spp, uint16 bps, + FILE *dumpfile, int format, int level) + { + int i, bytes_per_sample; + uint32 row, col, col_offset, src_rowsize, dst_rowsize, row_offset; + unsigned char *src; + unsigned char *dst; + tsample_t s; + + src = srcbuffs[0]; + dst = out; + if ((src == NULL) || (dst == NULL)) + { + TIFFError("combineSeparateSamplesBytes","Invalid buffer address"); + return (1); + } + + bytes_per_sample = (bps + 7) / 8; + + src_rowsize = ((bps * cols) + 7) / 8; + dst_rowsize = ((bps * spp * cols) + 7) / 8; + for (row = 0; row < rows; row++) + { + if ((dumpfile != NULL) && (level == 2)) + { + for (s = 0; s < spp; s++) + { + dump_info (dumpfile, format, "combineSeparateSamplesBytes","Input data, Sample %d", s); + dump_buffer(dumpfile, format, 1, cols, row, srcbuffs[s] + (row * src_rowsize)); + } + } + dst = out + (row * dst_rowsize); + row_offset = row * src_rowsize; + for (col = 0; col < cols; col++) + { + col_offset = row_offset + (col * (bps / 8)); + for (s = 0; (s < spp) && (s < MAX_SAMPLES); s++) + { + src = srcbuffs[s] + col_offset; + for (i = 0; i < bytes_per_sample; i++) + *(dst + i) = *(src + i); + src += bytes_per_sample; + dst += bytes_per_sample; + } + } + + if ((dumpfile != NULL) && (level == 2)) + { + dump_info (dumpfile, format, "combineSeparateSamplesBytes","Output data, combined samples"); + dump_buffer(dumpfile, format, 1, dst_rowsize, row, out + (row * dst_rowsize)); + } + } + + return (0); + } /* end combineSeparateSamplesBytes */ + +static int +combineSeparateSamples8bits (uint8 *in[], uint8 *out, uint32 cols, + uint32 rows, uint16 spp, uint16 bps, + FILE *dumpfile, int format, int level) + { + int ready_bits = 0; + int bytes_per_sample = 0; + uint32 src_rowsize, dst_rowsize, src_offset; + uint32 bit_offset; + uint32 row, col, src_byte = 0, src_bit = 0; + uint8 maskbits = 0, matchbits = 0; + uint8 buff1 = 0, buff2 = 0; + tsample_t s; + unsigned char *src = in[0]; + unsigned char *dst = out; + char action[32]; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("combineSeparateSamples8bits","Invalid input or output buffer"); + return (1); + } + + bytes_per_sample = (bps + 7) / 8; + src_rowsize = ((bps * cols) + 7) / 8; + dst_rowsize = ((bps * cols * spp) + 7) / 8; + maskbits = (uint8)-1 >> ( 8 - bps); + + for (row = 0; row < rows; row++) + { + ready_bits = 0; + buff1 = buff2 = 0; + dst = out + (row * dst_rowsize); + src_offset = row * src_rowsize; + for (col = 0; col < cols; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps; + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + + matchbits = maskbits << (8 - src_bit - bps); + /* load up next sample from each plane */ + for (s = 0; s < spp; s++) + { + src = in[s] + src_offset + src_byte; + buff1 = ((*src) & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 8) + { + *dst++ = buff2; + buff2 = buff1; + ready_bits -= 8; + strcpy (action, "Flush"); + } + else + { + buff2 = (buff2 | (buff1 >> ready_bits)); + strcpy (action, "Update"); + } + ready_bits += bps; + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Samples %d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, s, src_byte, src_bit, dst - out); + dump_byte (dumpfile, format, "Match bits", matchbits); + dump_byte (dumpfile, format, "Src bits", *src); + dump_byte (dumpfile, format, "Buff1 bits", buff1); + dump_byte (dumpfile, format, "Buff2 bits", buff2); + dump_info (dumpfile, format, "","%s", action); + } + } + } + + if (ready_bits > 0) + { + buff1 = (buff2 & ((unsigned int)255 << (8 - ready_bits))); + *dst++ = buff1; + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, src_byte, src_bit, dst - out); + dump_byte (dumpfile, format, "Final bits", buff1); + } + } + + if ((dumpfile != NULL) && (level >= 2)) + { + dump_info (dumpfile, format, "combineSeparateSamples8bits","Output data"); + dump_buffer(dumpfile, format, 1, dst_rowsize, row, out + (row * dst_rowsize)); + } + } + + return (0); + } /* end combineSeparateSamples8bits */ + +static int +combineSeparateSamples16bits (uint8 *in[], uint8 *out, uint32 cols, + uint32 rows, uint16 spp, uint16 bps, + FILE *dumpfile, int format, int level) + { + int ready_bits = 0, bytes_per_sample = 0; + uint32 src_rowsize, dst_rowsize; + uint32 bit_offset, src_offset; + uint32 row, col, src_byte = 0, src_bit = 0; + uint16 maskbits = 0, matchbits = 0; + uint16 buff1 = 0, buff2 = 0; + uint8 bytebuff = 0; + tsample_t s; + unsigned char *src = in[0]; + unsigned char *dst = out; + char action[8]; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("combineSeparateSamples16bits","Invalid input or output buffer"); + return (1); + } + + bytes_per_sample = (bps + 7) / 8; + src_rowsize = ((bps * cols) + 7) / 8; + dst_rowsize = ((bps * cols * spp) + 7) / 8; + maskbits = (uint16)-1 >> (16 - bps); + + for (row = 0; row < rows; row++) + { + ready_bits = 0; + buff1 = buff2 = 0; + dst = out + (row * dst_rowsize); + src_offset = row * src_rowsize; + for (col = 0; col < cols; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps; + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + + matchbits = maskbits << (16 - src_bit - bps); + for (s = 0; s < spp; s++) + { + src = in[s] + src_offset + src_byte; + if (little_endian) + buff1 = (src[0] << 8) | src[1]; + else + buff1 = (src[1] << 8) | src[0]; + + buff1 = (buff1 & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 8) + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + ready_bits -= 8; + /* shift in new bits */ + buff2 = ((buff2 << 8) | (buff1 >> ready_bits)); + strcpy (action, "Flush"); + } + else + { /* add another bps bits to the buffer */ + bytebuff = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + strcpy (action, "Update"); + } + ready_bits += bps; + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Samples %d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, s, src_byte, src_bit, dst - out); + + dump_short (dumpfile, format, "Match bits", matchbits); + dump_data (dumpfile, format, "Src bits", src, 2); + dump_short (dumpfile, format, "Buff1 bits", buff1); + dump_short (dumpfile, format, "Buff2 bits", buff2); + dump_byte (dumpfile, format, "Write byte", bytebuff); + dump_info (dumpfile, format, "","Ready bits: %d, %s", ready_bits, action); + } + } + } + + /* catch any trailing bits at the end of the line */ + if (ready_bits > 0) + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, src_byte, src_bit, dst - out); + dump_byte (dumpfile, format, "Final bits", bytebuff); + } + } + + if ((dumpfile != NULL) && (level == 2)) + { + dump_info (dumpfile, format, "combineSeparateSamples16bits","Output data"); + dump_buffer(dumpfile, format, 1, dst_rowsize, row, out + (row * dst_rowsize)); + } + } + + return (0); + } /* end combineSeparateSamples16bits */ + +static int +combineSeparateSamples24bits (uint8 *in[], uint8 *out, uint32 cols, + uint32 rows, uint16 spp, uint16 bps, + FILE *dumpfile, int format, int level) + { + int ready_bits = 0, bytes_per_sample = 0; + uint32 src_rowsize, dst_rowsize; + uint32 bit_offset, src_offset; + uint32 row, col, src_byte = 0, src_bit = 0; + uint32 maskbits = 0, matchbits = 0; + uint32 buff1 = 0, buff2 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0; + tsample_t s; + unsigned char *src = in[0]; + unsigned char *dst = out; + char action[8]; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("combineSeparateSamples24bits","Invalid input or output buffer"); + return (1); + } + + bytes_per_sample = (bps + 7) / 8; + src_rowsize = ((bps * cols) + 7) / 8; + dst_rowsize = ((bps * cols * spp) + 7) / 8; + maskbits = (uint32)-1 >> ( 32 - bps); + + for (row = 0; row < rows; row++) + { + ready_bits = 0; + buff1 = buff2 = 0; + dst = out + (row * dst_rowsize); + src_offset = row * src_rowsize; + for (col = 0; col < cols; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps; + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + + matchbits = maskbits << (32 - src_bit - bps); + for (s = 0; s < spp; s++) + { + src = in[s] + src_offset + src_byte; + if (little_endian) + buff1 = (src[0] << 24) | (src[1] << 16) | (src[2] << 8) | src[3]; + else + buff1 = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0]; + buff1 = (buff1 & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 16) + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 16); + *dst++ = bytebuff2; + ready_bits -= 16; + + /* shift in new bits */ + buff2 = ((buff2 << 16) | (buff1 >> ready_bits)); + strcpy (action, "Flush"); + } + else + { /* add another bps bits to the buffer */ + bytebuff1 = bytebuff2 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + strcpy (action, "Update"); + } + ready_bits += bps; + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Samples %d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, s, src_byte, src_bit, dst - out); + dump_long (dumpfile, format, "Match bits ", matchbits); + dump_data (dumpfile, format, "Src bits ", src, 4); + dump_long (dumpfile, format, "Buff1 bits ", buff1); + dump_long (dumpfile, format, "Buff2 bits ", buff2); + dump_byte (dumpfile, format, "Write bits1", bytebuff1); + dump_byte (dumpfile, format, "Write bits2", bytebuff2); + dump_info (dumpfile, format, "","Ready bits: %d, %s", ready_bits, action); + } + } + } + + /* catch any trailing bits at the end of the line */ + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + + buff2 = (buff2 << 8); + bytebuff2 = bytebuff1; + ready_bits -= 8; + } + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, src_byte, src_bit, dst - out); + + dump_long (dumpfile, format, "Match bits ", matchbits); + dump_data (dumpfile, format, "Src bits ", src, 4); + dump_long (dumpfile, format, "Buff1 bits ", buff1); + dump_long (dumpfile, format, "Buff2 bits ", buff2); + dump_byte (dumpfile, format, "Write bits1", bytebuff1); + dump_byte (dumpfile, format, "Write bits2", bytebuff2); + dump_info (dumpfile, format, "", "Ready bits: %2d", ready_bits); + } + + if ((dumpfile != NULL) && (level == 2)) + { + dump_info (dumpfile, format, "combineSeparateSamples24bits","Output data"); + dump_buffer(dumpfile, format, 1, dst_rowsize, row, out + (row * dst_rowsize)); + } + } + + return (0); + } /* end combineSeparateSamples24bits */ + +static int +combineSeparateSamples32bits (uint8 *in[], uint8 *out, uint32 cols, + uint32 rows, uint16 spp, uint16 bps, + FILE *dumpfile, int format, int level) + { + int ready_bits = 0, bytes_per_sample = 0, shift_width = 0; + uint32 src_rowsize, dst_rowsize, bit_offset, src_offset; + uint32 src_byte = 0, src_bit = 0; + uint32 row, col; + uint32 longbuff1 = 0, longbuff2 = 0; + uint64 maskbits = 0, matchbits = 0; + uint64 buff1 = 0, buff2 = 0, buff3 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0, bytebuff3 = 0, bytebuff4 = 0; + tsample_t s; + unsigned char *src = in[0]; + unsigned char *dst = out; + char action[8]; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("combineSeparateSamples32bits","Invalid input or output buffer"); + return (1); + } + + bytes_per_sample = (bps + 7) / 8; + src_rowsize = ((bps * cols) + 7) / 8; + dst_rowsize = ((bps * cols * spp) + 7) / 8; + maskbits = (uint64)-1 >> ( 64 - bps); + shift_width = ((bps + 7) / 8) + 1; + + for (row = 0; row < rows; row++) + { + ready_bits = 0; + buff1 = buff2 = 0; + dst = out + (row * dst_rowsize); + src_offset = row * src_rowsize; + for (col = 0; col < cols; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps; + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + + matchbits = maskbits << (64 - src_bit - bps); + for (s = 0; s < spp; s++) + { + src = in[s] + src_offset + src_byte; + if (little_endian) + { + longbuff1 = (src[0] << 24) | (src[1] << 16) | (src[2] << 8) | src[3]; + longbuff2 = longbuff1; + } + else + { + longbuff1 = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0]; + longbuff2 = longbuff1; + } + buff3 = ((uint64)longbuff1 << 32) | longbuff2; + buff1 = (buff3 & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 32) + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 48); + *dst++ = bytebuff2; + bytebuff3 = (buff2 >> 40); + *dst++ = bytebuff3; + bytebuff4 = (buff2 >> 32); + *dst++ = bytebuff4; + ready_bits -= 32; + + /* shift in new bits */ + buff2 = ((buff2 << 32) | (buff1 >> ready_bits)); + strcpy (action, "Flush"); + } + else + { /* add another bps bits to the buffer */ + bytebuff1 = bytebuff2 = bytebuff3 = bytebuff4 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + strcpy (action, "Update"); + } + ready_bits += bps; + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Sample %d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, s, src_byte, src_bit, dst - out); + dump_wide (dumpfile, format, "Match bits ", matchbits); + dump_data (dumpfile, format, "Src bits ", src, 8); + dump_wide (dumpfile, format, "Buff1 bits ", buff1); + dump_wide (dumpfile, format, "Buff2 bits ", buff2); + dump_info (dumpfile, format, "", "Ready bits: %d, %s", ready_bits, action); + } + } + } + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + buff2 = (buff2 << 8); + ready_bits -= 8; + } + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, src_byte, src_bit, dst - out); + + dump_long (dumpfile, format, "Match bits ", matchbits); + dump_data (dumpfile, format, "Src bits ", src, 4); + dump_long (dumpfile, format, "Buff1 bits ", buff1); + dump_long (dumpfile, format, "Buff2 bits ", buff2); + dump_byte (dumpfile, format, "Write bits1", bytebuff1); + dump_byte (dumpfile, format, "Write bits2", bytebuff2); + dump_info (dumpfile, format, "", "Ready bits: %2d", ready_bits); + } + + if ((dumpfile != NULL) && (level == 2)) + { + dump_info (dumpfile, format, "combineSeparateSamples32bits","Output data"); + dump_buffer(dumpfile, format, 1, dst_rowsize, row, out); + } + } + + return (0); + } /* end combineSeparateSamples32bits */ + +static int +combineSeparateTileSamplesBytes (unsigned char *srcbuffs[], unsigned char *out, + uint32 cols, uint32 rows, uint32 imagewidth, + uint32 tw, uint16 spp, uint16 bps, + FILE *dumpfile, int format, int level) + { + int i, bytes_per_sample; + uint32 row, col, col_offset, src_rowsize, dst_rowsize, src_offset; + unsigned char *src; + unsigned char *dst; + tsample_t s; + + src = srcbuffs[0]; + dst = out; + if ((src == NULL) || (dst == NULL)) + { + TIFFError("combineSeparateTileSamplesBytes","Invalid buffer address"); + return (1); + } + + bytes_per_sample = (bps + 7) / 8; + src_rowsize = ((bps * tw) + 7) / 8; + dst_rowsize = imagewidth * bytes_per_sample * spp; + for (row = 0; row < rows; row++) + { + if ((dumpfile != NULL) && (level == 2)) + { + for (s = 0; s < spp; s++) + { + dump_info (dumpfile, format, "combineSeparateTileSamplesBytes","Input data, Sample %d", s); + dump_buffer(dumpfile, format, 1, cols, row, srcbuffs[s] + (row * src_rowsize)); + } + } + dst = out + (row * dst_rowsize); + src_offset = row * src_rowsize; +#ifdef DEVELMODE + TIFFError("","Tile row %4d, Src offset %6d Dst offset %6d", + row, src_offset, dst - out); +#endif + for (col = 0; col < cols; col++) + { + col_offset = src_offset + (col * (bps / 8)); + for (s = 0; (s < spp) && (s < MAX_SAMPLES); s++) + { + src = srcbuffs[s] + col_offset; + for (i = 0; i < bytes_per_sample; i++) + *(dst + i) = *(src + i); + dst += bytes_per_sample; + } + } + + if ((dumpfile != NULL) && (level == 2)) + { + dump_info (dumpfile, format, "combineSeparateTileSamplesBytes","Output data, combined samples"); + dump_buffer(dumpfile, format, 1, dst_rowsize, row, out + (row * dst_rowsize)); + } + } + + return (0); + } /* end combineSeparateTileSamplesBytes */ + +static int +combineSeparateTileSamples8bits (uint8 *in[], uint8 *out, uint32 cols, + uint32 rows, uint32 imagewidth, + uint32 tw, uint16 spp, uint16 bps, + FILE *dumpfile, int format, int level) + { + int ready_bits = 0; + uint32 src_rowsize, dst_rowsize, src_offset; + uint32 bit_offset; + uint32 row, col, src_byte = 0, src_bit = 0; + uint8 maskbits = 0, matchbits = 0; + uint8 buff1 = 0, buff2 = 0; + tsample_t s; + unsigned char *src = in[0]; + unsigned char *dst = out; + char action[32]; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("combineSeparateTileSamples8bits","Invalid input or output buffer"); + return (1); + } + + src_rowsize = ((bps * tw) + 7) / 8; + dst_rowsize = ((imagewidth * bps * spp) + 7) / 8; + maskbits = (uint8)-1 >> ( 8 - bps); + + for (row = 0; row < rows; row++) + { + ready_bits = 0; + buff1 = buff2 = 0; + dst = out + (row * dst_rowsize); + src_offset = row * src_rowsize; + for (col = 0; col < cols; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps; + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + + matchbits = maskbits << (8 - src_bit - bps); + /* load up next sample from each plane */ + for (s = 0; s < spp; s++) + { + src = in[s] + src_offset + src_byte; + buff1 = ((*src) & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 8) + { + *dst++ = buff2; + buff2 = buff1; + ready_bits -= 8; + strcpy (action, "Flush"); + } + else + { + buff2 = (buff2 | (buff1 >> ready_bits)); + strcpy (action, "Update"); + } + ready_bits += bps; + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Samples %d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, s, src_byte, src_bit, dst - out); + dump_byte (dumpfile, format, "Match bits", matchbits); + dump_byte (dumpfile, format, "Src bits", *src); + dump_byte (dumpfile, format, "Buff1 bits", buff1); + dump_byte (dumpfile, format, "Buff2 bits", buff2); + dump_info (dumpfile, format, "","%s", action); + } + } + } + + if (ready_bits > 0) + { + buff1 = (buff2 & ((unsigned int)255 << (8 - ready_bits))); + *dst++ = buff1; + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, src_byte, src_bit, dst - out); + dump_byte (dumpfile, format, "Final bits", buff1); + } + } + + if ((dumpfile != NULL) && (level >= 2)) + { + dump_info (dumpfile, format, "combineSeparateTileSamples8bits","Output data"); + dump_buffer(dumpfile, format, 1, dst_rowsize, row, out + (row * dst_rowsize)); + } + } + + return (0); + } /* end combineSeparateTileSamples8bits */ + +static int +combineSeparateTileSamples16bits (uint8 *in[], uint8 *out, uint32 cols, + uint32 rows, uint32 imagewidth, + uint32 tw, uint16 spp, uint16 bps, + FILE *dumpfile, int format, int level) + { + int ready_bits = 0; + uint32 src_rowsize, dst_rowsize; + uint32 bit_offset, src_offset; + uint32 row, col, src_byte = 0, src_bit = 0; + uint16 maskbits = 0, matchbits = 0; + uint16 buff1 = 0, buff2 = 0; + uint8 bytebuff = 0; + tsample_t s; + unsigned char *src = in[0]; + unsigned char *dst = out; + char action[8]; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("combineSeparateTileSamples16bits","Invalid input or output buffer"); + return (1); + } + + src_rowsize = ((bps * tw) + 7) / 8; + dst_rowsize = ((imagewidth * bps * spp) + 7) / 8; + maskbits = (uint16)-1 >> (16 - bps); + + for (row = 0; row < rows; row++) + { + ready_bits = 0; + buff1 = buff2 = 0; + dst = out + (row * dst_rowsize); + src_offset = row * src_rowsize; + for (col = 0; col < cols; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps; + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + + matchbits = maskbits << (16 - src_bit - bps); + for (s = 0; s < spp; s++) + { + src = in[s] + src_offset + src_byte; + if (little_endian) + buff1 = (src[0] << 8) | src[1]; + else + buff1 = (src[1] << 8) | src[0]; + buff1 = (buff1 & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 8) + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + ready_bits -= 8; + /* shift in new bits */ + buff2 = ((buff2 << 8) | (buff1 >> ready_bits)); + strcpy (action, "Flush"); + } + else + { /* add another bps bits to the buffer */ + bytebuff = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + strcpy (action, "Update"); + } + ready_bits += bps; + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Samples %d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, s, src_byte, src_bit, dst - out); + + dump_short (dumpfile, format, "Match bits", matchbits); + dump_data (dumpfile, format, "Src bits", src, 2); + dump_short (dumpfile, format, "Buff1 bits", buff1); + dump_short (dumpfile, format, "Buff2 bits", buff2); + dump_byte (dumpfile, format, "Write byte", bytebuff); + dump_info (dumpfile, format, "","Ready bits: %d, %s", ready_bits, action); + } + } + } + + /* catch any trailing bits at the end of the line */ + if (ready_bits > 0) + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, src_byte, src_bit, dst - out); + dump_byte (dumpfile, format, "Final bits", bytebuff); + } + } + + if ((dumpfile != NULL) && (level == 2)) + { + dump_info (dumpfile, format, "combineSeparateTileSamples16bits","Output data"); + dump_buffer(dumpfile, format, 1, dst_rowsize, row, out + (row * dst_rowsize)); + } + } + + return (0); + } /* end combineSeparateTileSamples16bits */ + +static int +combineSeparateTileSamples24bits (uint8 *in[], uint8 *out, uint32 cols, + uint32 rows, uint32 imagewidth, + uint32 tw, uint16 spp, uint16 bps, + FILE *dumpfile, int format, int level) + { + int ready_bits = 0; + uint32 src_rowsize, dst_rowsize; + uint32 bit_offset, src_offset; + uint32 row, col, src_byte = 0, src_bit = 0; + uint32 maskbits = 0, matchbits = 0; + uint32 buff1 = 0, buff2 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0; + tsample_t s; + unsigned char *src = in[0]; + unsigned char *dst = out; + char action[8]; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("combineSeparateTileSamples24bits","Invalid input or output buffer"); + return (1); + } + + src_rowsize = ((bps * tw) + 7) / 8; + dst_rowsize = ((imagewidth * bps * spp) + 7) / 8; + maskbits = (uint32)-1 >> ( 32 - bps); + + for (row = 0; row < rows; row++) + { + ready_bits = 0; + buff1 = buff2 = 0; + dst = out + (row * dst_rowsize); + src_offset = row * src_rowsize; + for (col = 0; col < cols; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps; + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + + matchbits = maskbits << (32 - src_bit - bps); + for (s = 0; s < spp; s++) + { + src = in[s] + src_offset + src_byte; + if (little_endian) + buff1 = (src[0] << 24) | (src[1] << 16) | (src[2] << 8) | src[3]; + else + buff1 = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0]; + buff1 = (buff1 & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 16) + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 16); + *dst++ = bytebuff2; + ready_bits -= 16; + + /* shift in new bits */ + buff2 = ((buff2 << 16) | (buff1 >> ready_bits)); + strcpy (action, "Flush"); + } + else + { /* add another bps bits to the buffer */ + bytebuff1 = bytebuff2 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + strcpy (action, "Update"); + } + ready_bits += bps; + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Samples %d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, s, src_byte, src_bit, dst - out); + dump_long (dumpfile, format, "Match bits ", matchbits); + dump_data (dumpfile, format, "Src bits ", src, 4); + dump_long (dumpfile, format, "Buff1 bits ", buff1); + dump_long (dumpfile, format, "Buff2 bits ", buff2); + dump_byte (dumpfile, format, "Write bits1", bytebuff1); + dump_byte (dumpfile, format, "Write bits2", bytebuff2); + dump_info (dumpfile, format, "","Ready bits: %d, %s", ready_bits, action); + } + } + } + + /* catch any trailing bits at the end of the line */ + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + + buff2 = (buff2 << 8); + bytebuff2 = bytebuff1; + ready_bits -= 8; + } + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, src_byte, src_bit, dst - out); + + dump_long (dumpfile, format, "Match bits ", matchbits); + dump_data (dumpfile, format, "Src bits ", src, 4); + dump_long (dumpfile, format, "Buff1 bits ", buff1); + dump_long (dumpfile, format, "Buff2 bits ", buff2); + dump_byte (dumpfile, format, "Write bits1", bytebuff1); + dump_byte (dumpfile, format, "Write bits2", bytebuff2); + dump_info (dumpfile, format, "", "Ready bits: %2d", ready_bits); + } + + if ((dumpfile != NULL) && (level == 2)) + { + dump_info (dumpfile, format, "combineSeparateTileSamples24bits","Output data"); + dump_buffer(dumpfile, format, 1, dst_rowsize, row, out + (row * dst_rowsize)); + } + } + + return (0); + } /* end combineSeparateTileSamples24bits */ + +static int +combineSeparateTileSamples32bits (uint8 *in[], uint8 *out, uint32 cols, + uint32 rows, uint32 imagewidth, + uint32 tw, uint16 spp, uint16 bps, + FILE *dumpfile, int format, int level) + { + int ready_bits = 0, shift_width = 0; + uint32 src_rowsize, dst_rowsize, bit_offset, src_offset; + uint32 src_byte = 0, src_bit = 0; + uint32 row, col; + uint32 longbuff1 = 0, longbuff2 = 0; + uint64 maskbits = 0, matchbits = 0; + uint64 buff1 = 0, buff2 = 0, buff3 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0, bytebuff3 = 0, bytebuff4 = 0; + tsample_t s; + unsigned char *src = in[0]; + unsigned char *dst = out; + char action[8]; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("combineSeparateTileSamples32bits","Invalid input or output buffer"); + return (1); + } + + src_rowsize = ((bps * tw) + 7) / 8; + dst_rowsize = ((imagewidth * bps * spp) + 7) / 8; + maskbits = (uint64)-1 >> ( 64 - bps); + shift_width = ((bps + 7) / 8) + 1; + + for (row = 0; row < rows; row++) + { + ready_bits = 0; + buff1 = buff2 = 0; + dst = out + (row * dst_rowsize); + src_offset = row * src_rowsize; + for (col = 0; col < cols; col++) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = col * bps; + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + + matchbits = maskbits << (64 - src_bit - bps); + for (s = 0; s < spp; s++) + { + src = in[s] + src_offset + src_byte; + if (little_endian) + { + longbuff1 = (src[0] << 24) | (src[1] << 16) | (src[2] << 8) | src[3]; + longbuff2 = longbuff1; + } + else + { + longbuff1 = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0]; + longbuff2 = longbuff1; + } + + buff3 = ((uint64)longbuff1 << 32) | longbuff2; + buff1 = (buff3 & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 32) + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 48); + *dst++ = bytebuff2; + bytebuff3 = (buff2 >> 40); + *dst++ = bytebuff3; + bytebuff4 = (buff2 >> 32); + *dst++ = bytebuff4; + ready_bits -= 32; + + /* shift in new bits */ + buff2 = ((buff2 << 32) | (buff1 >> ready_bits)); + strcpy (action, "Flush"); + } + else + { /* add another bps bits to the buffer */ + bytebuff1 = bytebuff2 = bytebuff3 = bytebuff4 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + strcpy (action, "Update"); + } + ready_bits += bps; + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Sample %d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, s, src_byte, src_bit, dst - out); + dump_wide (dumpfile, format, "Match bits ", matchbits); + dump_data (dumpfile, format, "Src bits ", src, 8); + dump_wide (dumpfile, format, "Buff1 bits ", buff1); + dump_wide (dumpfile, format, "Buff2 bits ", buff2); + dump_info (dumpfile, format, "", "Ready bits: %d, %s", ready_bits, action); + } + } + } + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + buff2 = (buff2 << 8); + ready_bits -= 8; + } + + if ((dumpfile != NULL) && (level == 3)) + { + dump_info (dumpfile, format, "", + "Row %3d, Col %3d, Src byte offset %3d bit offset %2d Dst offset %3d", + row + 1, col + 1, src_byte, src_bit, dst - out); + + dump_long (dumpfile, format, "Match bits ", matchbits); + dump_data (dumpfile, format, "Src bits ", src, 4); + dump_long (dumpfile, format, "Buff1 bits ", buff1); + dump_long (dumpfile, format, "Buff2 bits ", buff2); + dump_byte (dumpfile, format, "Write bits1", bytebuff1); + dump_byte (dumpfile, format, "Write bits2", bytebuff2); + dump_info (dumpfile, format, "", "Ready bits: %2d", ready_bits); + } + + if ((dumpfile != NULL) && (level == 2)) + { + dump_info (dumpfile, format, "combineSeparateTileSamples32bits","Output data"); + dump_buffer(dumpfile, format, 1, dst_rowsize, row, out); + } + } + + return (0); + } /* end combineSeparateTileSamples32bits */ + + +static int readSeparateStripsIntoBuffer (TIFF *in, uint8 *obuf, uint32 length, + uint32 width, uint16 spp, + struct dump_opts *dump) + { + int i, j, bytes_per_sample, bytes_per_pixel, shift_width, result = 1; + int32 bytes_read = 0; + uint16 bps, nstrips, planar, strips_per_sample; + uint32 src_rowsize, dst_rowsize, rows_processed, rps; + uint32 rows_this_strip = 0; + tsample_t s; + tstrip_t strip; + tsize_t scanlinesize = TIFFScanlineSize(in); + tsize_t stripsize = TIFFStripSize(in); + unsigned char *srcbuffs[MAX_SAMPLES]; + unsigned char *buff = NULL; + unsigned char *dst = NULL; + + if (obuf == NULL) + { + TIFFError("readSeparateStripsIntoBuffer","Invalid buffer argument"); + return (0); + } + + memset (srcbuffs, '\0', sizeof(srcbuffs)); + TIFFGetField(in, TIFFTAG_BITSPERSAMPLE, &bps); + TIFFGetFieldDefaulted(in, TIFFTAG_PLANARCONFIG, &planar); + TIFFGetFieldDefaulted(in, TIFFTAG_ROWSPERSTRIP, &rps); + if (rps > length) + rps = length; + + bytes_per_sample = (bps + 7) / 8; + bytes_per_pixel = ((bps * spp) + 7) / 8; + if (bytes_per_pixel < (bytes_per_sample + 1)) + shift_width = bytes_per_pixel; + else + shift_width = bytes_per_sample + 1; + + src_rowsize = ((bps * width) + 7) / 8; + dst_rowsize = ((bps * width * spp) + 7) / 8; + dst = obuf; + + if ((dump->infile != NULL) && (dump->level == 3)) + { + dump_info (dump->infile, dump->format, "", + "Image width %d, length %d, Scanline size, %4d bytes", + width, length, scanlinesize); + dump_info (dump->infile, dump->format, "", + "Bits per sample %d, Samples per pixel %d, Shift width %d", + bps, spp, shift_width); + } + + /* Libtiff seems to assume/require that data for separate planes are + * written one complete plane after another and not interleaved in any way. + * Multiple scanlines and possibly strips of the same plane must be + * written before data for any other plane. + */ + nstrips = TIFFNumberOfStrips(in); + strips_per_sample = nstrips /spp; + + for (s = 0; (s < spp) && (s < MAX_SAMPLES); s++) + { + srcbuffs[s] = NULL; + buff = _TIFFmalloc(stripsize); + if (!buff) + { + TIFFError ("readSeparateStripsIntoBuffer", + "Unable to allocate strip read buffer for sample %d", s); + for (i = 0; i < s; i++) + _TIFFfree (srcbuffs[i]); + return 0; + } + srcbuffs[s] = buff; + } + + rows_processed = 0; + for (j = 0; (j < strips_per_sample) && (result == 1); j++) + { + for (s = 0; (s < spp) && (s < MAX_SAMPLES); s++) + { + buff = srcbuffs[s]; + strip = (s * strips_per_sample) + j; + bytes_read = TIFFReadEncodedStrip (in, strip, buff, stripsize); + rows_this_strip = bytes_read / src_rowsize; + if (bytes_read < 0 && !ignore) + { + TIFFError(TIFFFileName(in), + "Error, can't read strip %lu for sample %d", + (unsigned long) strip, s + 1); + result = 0; + break; + } +#ifdef DEVELMODE + TIFFError("", "Strip %2d, read %5d bytes for %4d scanlines, shift width %d", + strip, bytes_read, rows_this_strip, shift_width); +#endif + } + + if (rps > rows_this_strip) + rps = rows_this_strip; + dst = obuf + (dst_rowsize * rows_processed); + if ((bps % 8) == 0) + { + if (combineSeparateSamplesBytes (srcbuffs, dst, width, rps, + spp, bps, dump->infile, + dump->format, dump->level)) + { + result = 0; + break; + } + } + else + { + switch (shift_width) + { + case 1: if (combineSeparateSamples8bits (srcbuffs, dst, width, rps, + spp, bps, dump->infile, + dump->format, dump->level)) + { + result = 0; + break; + } + break; + case 2: if (combineSeparateSamples16bits (srcbuffs, dst, width, rps, + spp, bps, dump->infile, + dump->format, dump->level)) + { + result = 0; + break; + } + break; + case 3: if (combineSeparateSamples24bits (srcbuffs, dst, width, rps, + spp, bps, dump->infile, + dump->format, dump->level)) + { + result = 0; + break; + } + break; + case 4: + case 5: + case 6: + case 7: + case 8: if (combineSeparateSamples32bits (srcbuffs, dst, width, rps, + spp, bps, dump->infile, + dump->format, dump->level)) + { + result = 0; + break; + } + break; + default: TIFFError ("readSeparateStripsIntoBuffer", "Unsupported bit depth: %d", bps); + result = 0; + break; + } + } + + if ((rows_processed + rps) > length) + { + rows_processed = length; + rps = length - rows_processed; + } + else + rows_processed += rps; + } + + /* free any buffers allocated for each plane or scanline and + * any temporary buffers + */ + for (s = 0; (s < spp) && (s < MAX_SAMPLES); s++) + { + buff = srcbuffs[s]; + if (buff != NULL) + _TIFFfree(buff); + } + + return (result); + } /* end readSeparateStripsIntoBuffer */ + +static int +get_page_geometry (char *name, struct pagedef *page) + { + char *ptr; + int n; + + for (ptr = name; *ptr; ptr++) + *ptr = (char)tolower((int)*ptr); + + for (n = 0; n < MAX_PAPERNAMES; n++) + { + if (strcmp(name, PaperTable[n].name) == 0) + { + page->width = PaperTable[n].width; + page->length = PaperTable[n].length; + strncpy (page->name, PaperTable[n].name, 15); + page->name[15] = '\0'; + return (0); + } + } + + return (1); + } + + +static void +initPageSetup (struct pagedef *page, struct pageseg *pagelist, + struct buffinfo seg_buffs[]) + { + int i; + + strcpy (page->name, ""); + page->mode = PAGE_MODE_NONE; + page->res_unit = RESUNIT_NONE; + page->hres = 0.0; + page->vres = 0.0; + page->width = 0.0; + page->length = 0.0; + page->hmargin = 0.0; + page->vmargin = 0.0; + page->rows = 0; + page->cols = 0; + page->orient = ORIENTATION_NONE; + + for (i = 0; i < MAX_SECTIONS; i++) + { + pagelist[i].x1 = (uint32)0; + pagelist[i].x2 = (uint32)0; + pagelist[i].y1 = (uint32)0; + pagelist[i].y2 = (uint32)0; + pagelist[i].buffsize = (uint32)0; + pagelist[i].position = 0; + pagelist[i].total = 0; + } + + for (i = 0; i < MAX_OUTBUFFS; i++) + { + seg_buffs[i].size = 0; + seg_buffs[i].buffer = NULL; + } + } + +static void +initImageData (struct image_data *image) + { + image->xres = 0.0; + image->yres = 0.0; + image->width = 0; + image->length = 0; + image->res_unit = RESUNIT_NONE; + image->bps = 0; + image->spp = 0; + image->planar = 0; + image->photometric = 0; + image->orientation = 0; + image->compression = COMPRESSION_NONE; + image->adjustments = 0; + } + +static void +initCropMasks (struct crop_mask *cps) + { + int i; + + cps->crop_mode = CROP_NONE; + cps->res_unit = RESUNIT_NONE; + cps->edge_ref = EDGE_TOP; + cps->width = 0; + cps->length = 0; + for (i = 0; i < 4; i++) + cps->margins[i] = 0.0; + cps->bufftotal = (uint32)0; + cps->combined_width = (uint32)0; + cps->combined_length = (uint32)0; + cps->rotation = (uint16)0; + cps->photometric = INVERT_DATA_AND_TAG; + cps->mirror = (uint16)0; + cps->invert = (uint16)0; + cps->zones = (uint32)0; + cps->regions = (uint32)0; + for (i = 0; i < MAX_REGIONS; i++) + { + cps->corners[i].X1 = 0.0; + cps->corners[i].X2 = 0.0; + cps->corners[i].Y1 = 0.0; + cps->corners[i].Y2 = 0.0; + cps->regionlist[i].x1 = 0; + cps->regionlist[i].x2 = 0; + cps->regionlist[i].y1 = 0; + cps->regionlist[i].y2 = 0; + cps->regionlist[i].width = 0; + cps->regionlist[i].length = 0; + cps->regionlist[i].buffsize = 0; + cps->regionlist[i].buffptr = NULL; + cps->zonelist[i].position = 0; + cps->zonelist[i].total = 0; + } + cps->exp_mode = ONE_FILE_COMPOSITE; + cps->img_mode = COMPOSITE_IMAGES; + } + +static void initDumpOptions(struct dump_opts *dump) + { + dump->debug = 0; + dump->format = DUMP_NONE; + dump->level = 1; + sprintf (dump->mode, "w"); + memset (dump->infilename, '\0', PATH_MAX + 1); + memset (dump->outfilename, '\0',PATH_MAX + 1); + dump->infile = NULL; + dump->outfile = NULL; + } + +/* Compute pixel offsets into the image for margins and fixed regions */ +static int +computeInputPixelOffsets(struct crop_mask *crop, struct image_data *image, + struct offset *off) + { + double scale; + float xres, yres; + /* Values for these offsets are in pixels from start of image, not bytes, + * and are indexed from zero to width - 1 or length - 1 */ + uint32 tmargin, bmargin, lmargin, rmargin; + uint32 startx, endx; /* offsets of first and last columns to extract */ + uint32 starty, endy; /* offsets of first and last row to extract */ + uint32 width, length, crop_width, crop_length; + uint32 i, max_width, max_length, zwidth, zlength, buffsize; + uint32 x1, x2, y1, y2; + + if (image->res_unit != RESUNIT_INCH && image->res_unit != RESUNIT_CENTIMETER) + { + xres = 1.0; + yres = 1.0; + } + else + { + if (((image->xres == 0) || (image->yres == 0)) && + (crop->res_unit != RESUNIT_NONE) && + ((crop->crop_mode & CROP_REGIONS) || (crop->crop_mode & CROP_MARGINS) || + (crop->crop_mode & CROP_LENGTH) || (crop->crop_mode & CROP_WIDTH))) + { + TIFFError("computeInputPixelOffsets", "Cannot compute margins or fixed size sections without image resolution"); + TIFFError("computeInputPixelOffsets", "Specify units in pixels and try again"); + return (-1); + } + xres = image->xres; + yres = image->yres; + } + + /* Translate user units to image units */ + scale = 1.0; + switch (crop->res_unit) { + case RESUNIT_CENTIMETER: + if (image->res_unit == RESUNIT_INCH) + scale = 1.0/2.54; + break; + case RESUNIT_INCH: + if (image->res_unit == RESUNIT_CENTIMETER) + scale = 2.54; + break; + case RESUNIT_NONE: /* Dimensions in pixels */ + default: + break; + } + + if (crop->crop_mode & CROP_REGIONS) + { + max_width = max_length = 0; + for (i = 0; i < crop->regions; i++) + { + if ((crop->res_unit == RESUNIT_INCH) || (crop->res_unit == RESUNIT_CENTIMETER)) + { + x1 = (uint32) (crop->corners[i].X1 * scale * xres); + x2 = (uint32) (crop->corners[i].X2 * scale * xres); + y1 = (uint32) (crop->corners[i].Y1 * scale * yres); + y2 = (uint32) (crop->corners[i].Y2 * scale * yres); + } + else + { + x1 = (uint32) (crop->corners[i].X1); + x2 = (uint32) (crop->corners[i].X2); + y1 = (uint32) (crop->corners[i].Y1); + y2 = (uint32) (crop->corners[i].Y2); + } + if (x1 < 1) + crop->regionlist[i].x1 = 0; + else + crop->regionlist[i].x1 = (uint32) (x1 - 1); + + if (x2 > image->width - 1) + crop->regionlist[i].x2 = image->width - 1; + else + crop->regionlist[i].x2 = (uint32) (x2 - 1); + zwidth = crop->regionlist[i].x2 - crop->regionlist[i].x1 + 1; + + if (y1 < 1) + crop->regionlist[i].y1 = 0; + else + crop->regionlist[i].y1 = (uint32) (y1 - 1); + + if (y2 > image->length - 1) + crop->regionlist[i].y2 = image->length - 1; + else + crop->regionlist[i].y2 = (uint32) (y2 - 1); + + zlength = crop->regionlist[i].y2 - crop->regionlist[i].y1 + 1; + + if (zwidth > max_width) + max_width = zwidth; + if (zlength > max_length) + max_length = zlength; + + buffsize = (uint32) + (((zwidth * image->bps * image->spp + 7 ) / 8) * (zlength + 1)); + + crop->regionlist[i].buffsize = buffsize; + crop->bufftotal += buffsize; + if (crop->img_mode == COMPOSITE_IMAGES) + { + switch (crop->edge_ref) + { + case EDGE_LEFT: + case EDGE_RIGHT: + crop->combined_length = zlength; + crop->combined_width += zwidth; + break; + case EDGE_BOTTOM: + case EDGE_TOP: /* width from left, length from top */ + default: + crop->combined_width = zwidth; + crop->combined_length += zlength; + break; + } + } + } + return (0); + } + + /* Convert crop margins into offsets into image + * Margins are expressed as pixel rows and columns, not bytes + */ + if (crop->crop_mode & CROP_MARGINS) + { + if (crop->res_unit != RESUNIT_INCH && crop->res_unit != RESUNIT_CENTIMETER) + { /* User has specified pixels as reference unit */ + tmargin = (uint32)(crop->margins[0]); + lmargin = (uint32)(crop->margins[1]); + bmargin = (uint32)(crop->margins[2]); + rmargin = (uint32)(crop->margins[3]); + } + else + { /* inches or centimeters specified */ + tmargin = (uint32)(crop->margins[0] * scale * yres); + lmargin = (uint32)(crop->margins[1] * scale * xres); + bmargin = (uint32)(crop->margins[2] * scale * yres); + rmargin = (uint32)(crop->margins[3] * scale * xres); + } + + if ((lmargin + rmargin) > image->width) + { + TIFFError("computeInputPixelOffsets", "Combined left and right margins exceed image width"); + lmargin = (uint32) 0; + rmargin = (uint32) 0; + return (-1); + } + if ((tmargin + bmargin) > image->length) + { + TIFFError("computeInputPixelOffsets", "Combined top and bottom margins exceed image length"); + tmargin = (uint32) 0; + bmargin = (uint32) 0; + return (-1); + } + } + else + { /* no margins requested */ + tmargin = (uint32) 0; + lmargin = (uint32) 0; + bmargin = (uint32) 0; + rmargin = (uint32) 0; + } + + /* Width, height, and margins are expressed as pixel offsets into image */ + if (crop->res_unit != RESUNIT_INCH && crop->res_unit != RESUNIT_CENTIMETER) + { + if (crop->crop_mode & CROP_WIDTH) + width = (uint32)crop->width; + else + width = image->width - lmargin - rmargin; + + if (crop->crop_mode & CROP_LENGTH) + length = (uint32)crop->length; + else + length = image->length - tmargin - bmargin; + } + else + { + if (crop->crop_mode & CROP_WIDTH) + width = (uint32)(crop->width * scale * image->xres); + else + width = image->width - lmargin - rmargin; + + if (crop->crop_mode & CROP_LENGTH) + length = (uint32)(crop->length * scale * image->yres); + else + length = image->length - tmargin - bmargin; + } + + off->tmargin = tmargin; + off->bmargin = bmargin; + off->lmargin = lmargin; + off->rmargin = rmargin; + + /* Calculate regions defined by margins, width, and length. + * Coordinates expressed as 0 to imagewidth - 1, imagelength - 1, + * since they are used to compute offsets into buffers */ + switch (crop->edge_ref) { + case EDGE_BOTTOM: + startx = lmargin; + if ((startx + width) >= (image->width - rmargin)) + endx = image->width - rmargin - 1; + else + endx = startx + width - 1; + + endy = image->length - bmargin - 1; + if ((endy - length) <= tmargin) + starty = tmargin; + else + starty = endy - length + 1; + break; + case EDGE_RIGHT: + endx = image->width - rmargin - 1; + if ((endx - width) <= lmargin) + startx = lmargin; + else + startx = endx - width + 1; + + starty = tmargin; + if ((starty + length) >= (image->length - bmargin)) + endy = image->length - bmargin - 1; + else + endy = starty + length - 1; + break; + case EDGE_TOP: /* width from left, length from top */ + case EDGE_LEFT: + default: + startx = lmargin; + if ((startx + width) >= (image->width - rmargin)) + endx = image->width - rmargin - 1; + else + endx = startx + width - 1; + + starty = tmargin; + if ((starty + length) >= (image->length - bmargin)) + endy = image->length - bmargin - 1; + else + endy = starty + length - 1; + break; + } + off->startx = startx; + off->starty = starty; + off->endx = endx; + off->endy = endy; + + crop_width = endx - startx + 1; + crop_length = endy - starty + 1; + + if (crop_width <= 0) + { + TIFFError("computeInputPixelOffsets", + "Invalid left/right margins and /or image crop width requested"); + return (-1); + } + if (crop_width > image->width) + crop_width = image->width; + + if (crop_length <= 0) + { + TIFFError("computeInputPixelOffsets", + "Invalid top/bottom margins and /or image crop length requested"); + return (-1); + } + if (crop_length > image->length) + crop_length = image->length; + + off->crop_width = crop_width; + off->crop_length = crop_length; + + return (0); + } /* end computeInputPixelOffsets */ + +/* + * Translate crop options into pixel offsets for one or more regions of the image. + * Options are applied in this order: margins, specific width and length, zones, + * but all are optional. Margins are relative to each edge. Width, length and + * zones are relative to the specified reference edge. Zones are expressed as + * X:Y where X is the ordinal value in a set of Y equal sized portions. eg. + * 2:3 would indicate the middle third of the region qualified by margins and + * any explicit width and length specified. Regions are specified by coordinates + * of the top left and lower right corners with range 1 to width or height. + */ + +static int +getCropOffsets(struct image_data *image, struct crop_mask *crop, struct dump_opts *dump) + { + struct offset offsets; + int i; + int32 test; + uint32 seg, total, need_buff = 0; + uint32 buffsize; + uint32 zwidth, zlength; + + memset(&offsets, '\0', sizeof(struct offset)); + crop->bufftotal = 0; + crop->combined_width = (uint32)0; + crop->combined_length = (uint32)0; + crop->selections = 0; + + /* Compute pixel offsets if margins or fixed width or length specified */ + if ((crop->crop_mode & CROP_MARGINS) || + (crop->crop_mode & CROP_REGIONS) || + (crop->crop_mode & CROP_LENGTH) || + (crop->crop_mode & CROP_WIDTH)) + { + if (computeInputPixelOffsets(crop, image, &offsets)) + { + TIFFError ("getCropOffsets", "Unable to compute crop margins"); + return (-1); + } + need_buff = TRUE; + crop->selections = crop->regions; + /* Regions are only calculated from top and left edges with no margins */ + if (crop->crop_mode & CROP_REGIONS) + return (0); + } + else + { /* cropped area is the full image */ + offsets.tmargin = 0; + offsets.lmargin = 0; + offsets.bmargin = 0; + offsets.rmargin = 0; + offsets.crop_width = image->width; + offsets.crop_length = image->length; + offsets.startx = 0; + offsets.endx = image->width - 1; + offsets.starty = 0; + offsets.endy = image->length - 1; + need_buff = FALSE; + } + + if (dump->outfile != NULL) + { + dump_info (dump->outfile, dump->format, "", "Margins: Top: %d Left: %d Bottom: %d Right: %d", + offsets.tmargin, offsets.lmargin, offsets.bmargin, offsets.rmargin); + dump_info (dump->outfile, dump->format, "", "Crop region within margins: Adjusted Width: %6d Length: %6d", + offsets.crop_width, offsets.crop_length); + } + + if (!(crop->crop_mode & CROP_ZONES)) /* no crop zones requested */ + { + if (need_buff == FALSE) /* No margins or fixed width or length areas */ + { + crop->selections = 0; + crop->combined_width = image->width; + crop->combined_length = image->length; + return (0); + } + else + { + /* Use one region for margins and fixed width or length areas + * even though it was not formally declared as a region. + */ + crop->selections = 1; + crop->zones = 1; + crop->zonelist[0].total = 1; + crop->zonelist[0].position = 1; + } + } + else + crop->selections = crop->zones; + + for (i = 0; i < crop->zones; i++) + { + seg = crop->zonelist[i].position; + total = crop->zonelist[i].total; + + switch (crop->edge_ref) + { + case EDGE_LEFT: /* zones from left to right, length from top */ + zlength = offsets.crop_length; + crop->regionlist[i].y1 = offsets.starty; + crop->regionlist[i].y2 = offsets.endy; + + crop->regionlist[i].x1 = offsets.startx + + (uint32)(offsets.crop_width * 1.0 * (seg - 1) / total); + test = (int32)offsets.startx + + (int32)(offsets.crop_width * 1.0 * seg / total); + if (test < 1 ) + crop->regionlist[i].x2 = 0; + else + { + if (test > (int32)(image->width - 1)) + crop->regionlist[i].x2 = image->width - 1; + else + crop->regionlist[i].x2 = test - 1; + } + zwidth = crop->regionlist[i].x2 - crop->regionlist[i].x1 + 1; + + /* This is passed to extractCropZone or extractCompositeZones */ + crop->combined_length = (uint32)zlength; + if (crop->exp_mode == COMPOSITE_IMAGES) + crop->combined_width += (uint32)zwidth; + else + crop->combined_width = (uint32)zwidth; + break; + case EDGE_BOTTOM: /* width from left, zones from bottom to top */ + zwidth = offsets.crop_width; + crop->regionlist[i].x1 = offsets.startx; + crop->regionlist[i].x2 = offsets.endx; + + test = offsets.endy - (uint32)(offsets.crop_length * 1.0 * seg / total); + if (test < 1 ) + crop->regionlist[i].y1 = 0; + else + crop->regionlist[i].y1 = test + 1; + + test = offsets.endy - (offsets.crop_length * 1.0 * (seg - 1) / total); + if (test < 1 ) + crop->regionlist[i].y2 = 0; + else + { + if (test > (int32)(image->length - 1)) + crop->regionlist[i].y2 = image->length - 1; + else + crop->regionlist[i].y2 = test; + } + zlength = crop->regionlist[i].y2 - crop->regionlist[i].y1 + 1; + + /* This is passed to extractCropZone or extractCompositeZones */ + if (crop->exp_mode == COMPOSITE_IMAGES) + crop->combined_length += (uint32)zlength; + else + crop->combined_length = (uint32)zlength; + crop->combined_width = (uint32)zwidth; + break; + case EDGE_RIGHT: /* zones from right to left, length from top */ + zlength = offsets.crop_length; + crop->regionlist[i].y1 = offsets.starty; + crop->regionlist[i].y2 = offsets.endy; + + crop->regionlist[i].x1 = offsets.startx + + (uint32)(offsets.crop_width * (total - seg) * 1.0 / total); + test = offsets.startx + + (offsets.crop_width * (total - seg + 1) * 1.0 / total); + if (test < 1 ) + crop->regionlist[i].x2 = 0; + else + { + if (test > (int32)(image->width - 1)) + crop->regionlist[i].x2 = image->width - 1; + else + crop->regionlist[i].x2 = test - 1; + } + zwidth = crop->regionlist[i].x2 - crop->regionlist[i].x1 + 1; + + /* This is passed to extractCropZone or extractCompositeZones */ + crop->combined_length = (uint32)zlength; + if (crop->exp_mode == COMPOSITE_IMAGES) + crop->combined_width += (uint32)zwidth; + else + crop->combined_width = (uint32)zwidth; + break; + case EDGE_TOP: /* width from left, zones from top to bottom */ + default: + zwidth = offsets.crop_width; + crop->regionlist[i].x1 = offsets.startx; + crop->regionlist[i].x2 = offsets.endx; + + crop->regionlist[i].y1 = offsets.starty + (uint32)(offsets.crop_length * 1.0 * (seg - 1) / total); + test = offsets.starty + (uint32)(offsets.crop_length * 1.0 * seg / total); + if (test < 1 ) + crop->regionlist[i].y2 = 0; + else + { + if (test > (int32)(image->length - 1)) + crop->regionlist[i].y2 = image->length - 1; + else + crop->regionlist[i].y2 = test - 1; + } + zlength = crop->regionlist[i].y2 - crop->regionlist[i].y1 + 1; + + /* This is passed to extractCropZone or extractCompositeZones */ + if (crop->exp_mode == COMPOSITE_IMAGES) + crop->combined_length += (uint32)zlength; + else + crop->combined_length = (uint32)zlength; + crop->combined_width = (uint32)zwidth; + break; + } /* end switch statement */ + + buffsize = (uint32) + ((((zwidth * image->bps * image->spp) + 7 ) / 8) * (zlength + 1)); + crop->regionlist[i].width = (uint32) zwidth; + crop->regionlist[i].length = (uint32) zlength; + crop->regionlist[i].buffsize = buffsize; + crop->bufftotal += buffsize; + + + if (dump->outfile != NULL) + dump_info (dump->outfile, dump->format, "", "Zone %d, width: %4d, length: %4d, x1: %4d x2: %4d y1: %4d y2: %4d", + i + 1, (uint32)zwidth, (uint32)zlength, + crop->regionlist[i].x1, crop->regionlist[i].x2, + crop->regionlist[i].y1, crop->regionlist[i].y2); + } + + return (0); + } /* end getCropOffsets */ + + +static int +computeOutputPixelOffsets (struct crop_mask *crop, struct image_data *image, + struct pagedef *page, struct pageseg *sections, + struct dump_opts* dump) + { + double scale; + double pwidth, plength; /* Output page width and length in user units*/ + uint32 iwidth, ilength; /* Input image width and length in pixels*/ + uint32 owidth, olength; /* Output image width and length in pixels*/ + uint32 orows, ocols; /* rows and cols for output */ + uint32 hmargin, vmargin; /* Horizontal and vertical margins */ + uint32 x1, x2, y1, y2, line_bytes; + unsigned int orientation; + uint32 i, j, k; + + scale = 1.0; + if (page->res_unit == RESUNIT_NONE) + page->res_unit = image->res_unit; + + switch (image->res_unit) { + case RESUNIT_CENTIMETER: + if (page->res_unit == RESUNIT_INCH) + scale = 1.0/2.54; + break; + case RESUNIT_INCH: + if (page->res_unit == RESUNIT_CENTIMETER) + scale = 2.54; + break; + case RESUNIT_NONE: /* Dimensions in pixels */ + default: + break; + } + + /* get width, height, resolutions of input image selection */ + if (crop->combined_width > 0) + iwidth = crop->combined_width; + else + iwidth = image->width; + if (crop->combined_length > 0) + ilength = crop->combined_length; + else + ilength = image->length; + + if (page->hres <= 1.0) + page->hres = image->xres; + if (page->vres <= 1.0) + page->vres = image->yres; + + if ((page->hres < 1.0) || (page->vres < 1.0)) + { + TIFFError("computeOutputPixelOffsets", + "Invalid horizontal or vertical resolution specified or read from input image"); + return (1); + } + + /* If no page sizes are being specified, we just use the input image size to + * calculate maximum margins that can be taken from image. + */ + if (page->width <= 0) + pwidth = iwidth; + else + pwidth = page->width; + + if (page->length <= 0) + plength = ilength; + else + plength = page->length; + + if (dump->debug) + { + TIFFError("", "Page size: %s, Vres: %3.2f, Hres: %3.2f, " + "Hmargin: %3.2f, Vmargin: %3.2f", + page->name, page->vres, page->hres, + page->hmargin, page->vmargin); + TIFFError("", "Res_unit: %d, Scale: %3.2f, Page width: %3.2f, length: %3.2f", + page->res_unit, scale, pwidth, plength); + } + + /* compute margins at specified unit and resolution */ + if (page->mode & PAGE_MODE_MARGINS) + { + if (page->res_unit == RESUNIT_INCH || page->res_unit == RESUNIT_CENTIMETER) + { /* inches or centimeters specified */ + hmargin = (uint32)(page->hmargin * scale * page->hres * ((image->bps + 7)/ 8)); + vmargin = (uint32)(page->vmargin * scale * page->vres * ((image->bps + 7)/ 8)); + } + else + { /* Otherwise user has specified pixels as reference unit */ + hmargin = (uint32)(page->hmargin * scale * ((image->bps + 7)/ 8)); + vmargin = (uint32)(page->vmargin * scale * ((image->bps + 7)/ 8)); + } + + if ((hmargin * 2.0) > (pwidth * page->hres)) + { + TIFFError("computeOutputPixelOffsets", + "Combined left and right margins exceed page width"); + hmargin = (uint32) 0; + return (-1); + } + if ((vmargin * 2.0) > (plength * page->vres)) + { + TIFFError("computeOutputPixelOffsets", + "Combined top and bottom margins exceed page length"); + vmargin = (uint32) 0; + return (-1); + } + } + else + { + hmargin = 0; + vmargin = 0; + } + + if (page->mode & PAGE_MODE_ROWSCOLS ) + { + /* Maybe someday but not for now */ + if (page->mode & PAGE_MODE_MARGINS) + TIFFError("computeOutputPixelOffsets", + "Output margins cannot be specified with rows and columns"); + + owidth = TIFFhowmany(iwidth, page->cols); + olength = TIFFhowmany(ilength, page->rows); + } + else + { + if (page->mode & PAGE_MODE_PAPERSIZE ) + { + owidth = (uint32)((pwidth * page->hres) - (hmargin * 2)); + olength = (uint32)((plength * page->vres) - (vmargin * 2)); + } + else + { + owidth = (uint32)(iwidth - (hmargin * 2 * page->hres)); + olength = (uint32)(ilength - (vmargin * 2 * page->vres)); + } + } + + if (owidth > iwidth) + owidth = iwidth; + if (olength > ilength) + olength = ilength; + + /* Compute the number of pages required for Portrait or Landscape */ + switch (page->orient) + { + case ORIENTATION_NONE: + case ORIENTATION_PORTRAIT: + ocols = TIFFhowmany(iwidth, owidth); + orows = TIFFhowmany(ilength, olength); + orientation = ORIENTATION_PORTRAIT; + break; + + case ORIENTATION_LANDSCAPE: + ocols = TIFFhowmany(iwidth, olength); + orows = TIFFhowmany(ilength, owidth); + x1 = olength; + olength = owidth; + owidth = x1; + orientation = ORIENTATION_LANDSCAPE; + break; + + case ORIENTATION_AUTO: + default: + x1 = TIFFhowmany(iwidth, owidth); + x2 = TIFFhowmany(ilength, olength); + y1 = TIFFhowmany(iwidth, olength); + y2 = TIFFhowmany(ilength, owidth); + + if ( (x1 * x2) < (y1 * y2)) + { /* Portrait */ + ocols = x1; + orows = x2; + orientation = ORIENTATION_PORTRAIT; + } + else + { /* Landscape */ + ocols = y1; + orows = y2; + x1 = olength; + olength = owidth; + owidth = x1; + orientation = ORIENTATION_LANDSCAPE; + } + } + + if (ocols < 1) + ocols = 1; + if (orows < 1) + orows = 1; + + /* If user did not specify rows and cols, set them from calcuation */ + if (page->rows < 1) + page->rows = orows; + if (page->cols < 1) + page->cols = ocols; + + line_bytes = TIFFhowmany8(owidth * image->bps) * image->spp; + + if ((page->rows * page->cols) > MAX_SECTIONS) + { + TIFFError("computeOutputPixelOffsets", + "Rows and Columns exceed maximum sections\nIncrease resolution or reduce sections"); + return (-1); + } + + /* build the list of offsets for each output section */ + for (k = 0, i = 0 && k <= MAX_SECTIONS; i < orows; i++) + { + y1 = (uint32)(olength * i); + y2 = (uint32)(olength * (i + 1) - 1); + if (y2 >= ilength) + y2 = ilength - 1; + for (j = 0; j < ocols; j++, k++) + { + x1 = (uint32)(owidth * j); + x2 = (uint32)(owidth * (j + 1) - 1); + if (x2 >= iwidth) + x2 = iwidth - 1; + sections[k].x1 = x1; + sections[k].x2 = x2; + sections[k].y1 = y1; + sections[k].y2 = y2; + sections[k].buffsize = line_bytes * olength; + sections[k].position = k + 1; + sections[k].total = orows * ocols; + } + } + return (0); + } /* end computeOutputPixelOffsets */ + +static int +loadImage(TIFF* in, struct image_data *image, struct dump_opts *dump, unsigned char **read_ptr) + { + uint32 i; + float xres = 0.0, yres = 0.0; + uint16 nstrips = 0, ntiles = 0, planar = 0; + uint16 bps = 0, spp = 0, res_unit = 0; + uint16 orientation = 0; + uint16 input_compression = 0, input_photometric = 0; + uint16 subsampling_horiz, subsampling_vert; + uint32 width = 0, length = 0; + uint32 stsize = 0, tlsize = 0, buffsize = 0, scanlinesize = 0; + uint32 tw = 0, tl = 0; /* Tile width and length */ + uint32 tile_rowsize = 0; + unsigned char *read_buff = NULL; + unsigned char *new_buff = NULL; + int readunit = 0; + static uint32 prev_readsize = 0; + + TIFFGetFieldDefaulted(in, TIFFTAG_BITSPERSAMPLE, &bps); + TIFFGetFieldDefaulted(in, TIFFTAG_SAMPLESPERPIXEL, &spp); + TIFFGetFieldDefaulted(in, TIFFTAG_PLANARCONFIG, &planar); + TIFFGetFieldDefaulted(in, TIFFTAG_ORIENTATION, &orientation); + if (! TIFFGetFieldDefaulted(in, TIFFTAG_PHOTOMETRIC, &input_photometric)) + TIFFError("loadImage","Image lacks Photometric interpreation tag"); + if (! TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &width)) + TIFFError("loadimage","Image lacks image width tag"); + if(! TIFFGetField(in, TIFFTAG_IMAGELENGTH, &length)) + TIFFError("loadimage","Image lacks image length tag"); + TIFFGetFieldDefaulted(in, TIFFTAG_XRESOLUTION, &xres); + TIFFGetFieldDefaulted(in, TIFFTAG_YRESOLUTION, &yres); + if (!TIFFGetFieldDefaulted(in, TIFFTAG_RESOLUTIONUNIT, &res_unit)) + res_unit = RESUNIT_INCH; + if (!TIFFGetField(in, TIFFTAG_COMPRESSION, &input_compression)) + input_compression = COMPRESSION_NONE; + +#ifdef DEBUG2 + char compressionid[16]; + + switch (input_compression) + { + case COMPRESSION_NONE: /* 1 dump mode */ + strcpy (compressionid, "None/dump"); + break; + case COMPRESSION_CCITTRLE: /* 2 CCITT modified Huffman RLE */ + strcpy (compressionid, "Huffman RLE"); + break; + case COMPRESSION_CCITTFAX3: /* 3 CCITT Group 3 fax encoding */ + strcpy (compressionid, "Group3 Fax"); + break; + case COMPRESSION_CCITTFAX4: /* 4 CCITT Group 4 fax encoding */ + strcpy (compressionid, "Group4 Fax"); + break; + case COMPRESSION_LZW: /* 5 Lempel-Ziv & Welch */ + strcpy (compressionid, "LZW"); + break; + case COMPRESSION_OJPEG: /* 6 !6.0 JPEG */ + strcpy (compressionid, "Old Jpeg"); + break; + case COMPRESSION_JPEG: /* 7 %JPEG DCT compression */ + strcpy (compressionid, "New Jpeg"); + break; + case COMPRESSION_NEXT: /* 32766 NeXT 2-bit RLE */ + strcpy (compressionid, "Next RLE"); + break; + case COMPRESSION_CCITTRLEW: /* 32771 #1 w/ word alignment */ + strcpy (compressionid, "CITTRLEW"); + break; + case COMPRESSION_PACKBITS: /* 32773 Macintosh RLE */ + strcpy (compressionid, "Mac Packbits"); + break; + case COMPRESSION_THUNDERSCAN: /* 32809 ThunderScan RLE */ + strcpy (compressionid, "Thunderscan"); + break; + case COMPRESSION_IT8CTPAD: /* 32895 IT8 CT w/padding */ + strcpy (compressionid, "IT8 padded"); + break; + case COMPRESSION_IT8LW: /* 32896 IT8 Linework RLE */ + strcpy (compressionid, "IT8 RLE"); + break; + case COMPRESSION_IT8MP: /* 32897 IT8 Monochrome picture */ + strcpy (compressionid, "IT8 mono"); + break; + case COMPRESSION_IT8BL: /* 32898 IT8 Binary line art */ + strcpy (compressionid, "IT8 lineart"); + break; + case COMPRESSION_PIXARFILM: /* 32908 Pixar companded 10bit LZW */ + strcpy (compressionid, "Pixar 10 bit"); + break; + case COMPRESSION_PIXARLOG: /* 32909 Pixar companded 11bit ZIP */ + strcpy (compressionid, "Pixar 11bit"); + break; + case COMPRESSION_DEFLATE: /* 32946 Deflate compression */ + strcpy (compressionid, "Deflate"); + break; + case COMPRESSION_ADOBE_DEFLATE: /* 8 Deflate compression */ + strcpy (compressionid, "Adobe deflate"); + break; + default: + strcpy (compressionid, "None/unknown"); + break; + } + TIFFError("loadImage", "Input compression %s", compressionid); +#endif + + scanlinesize = TIFFScanlineSize(in); + image->bps = bps; + image->spp = spp; + image->planar = planar; + image->width = width; + image->length = length; + image->xres = xres; + image->yres = yres; + image->res_unit = res_unit; + image->compression = input_compression; + image->photometric = input_photometric; +#ifdef DEBUG2 + char photometricid[12]; + + switch (input_photometric) + { + case PHOTOMETRIC_MINISWHITE: + strcpy (photometricid, "MinIsWhite"); + break; + case PHOTOMETRIC_MINISBLACK: + strcpy (photometricid, "MinIsBlack"); + break; + case PHOTOMETRIC_RGB: + strcpy (photometricid, "RGB"); + break; + case PHOTOMETRIC_PALETTE: + strcpy (photometricid, "Palette"); + break; + case PHOTOMETRIC_MASK: + strcpy (photometricid, "Mask"); + break; + case PHOTOMETRIC_SEPARATED: + strcpy (photometricid, "Separated"); + break; + case PHOTOMETRIC_YCBCR: + strcpy (photometricid, "YCBCR"); + break; + case PHOTOMETRIC_CIELAB: + strcpy (photometricid, "CIELab"); + break; + case PHOTOMETRIC_ICCLAB: + strcpy (photometricid, "ICCLab"); + break; + case PHOTOMETRIC_ITULAB: + strcpy (photometricid, "ITULab"); + break; + case PHOTOMETRIC_LOGL: + strcpy (photometricid, "LogL"); + break; + case PHOTOMETRIC_LOGLUV: + strcpy (photometricid, "LOGLuv"); + break; + default: + strcpy (photometricid, "Unknown"); + break; + } + TIFFError("loadImage", "Input photometric interpretation %s", photometricid); + +#endif + image->orientation = orientation; + switch (orientation) + { + case 0: + case ORIENTATION_TOPLEFT: + image->adjustments = 0; + break; + case ORIENTATION_TOPRIGHT: + image->adjustments = MIRROR_HORIZ; + break; + case ORIENTATION_BOTRIGHT: + image->adjustments = ROTATECW_180; + break; + case ORIENTATION_BOTLEFT: + image->adjustments = MIRROR_VERT; + break; + case ORIENTATION_LEFTTOP: + image->adjustments = MIRROR_VERT | ROTATECW_90; + break; + case ORIENTATION_RIGHTTOP: + image->adjustments = ROTATECW_90; + break; + case ORIENTATION_RIGHTBOT: + image->adjustments = MIRROR_VERT | ROTATECW_270; + break; + case ORIENTATION_LEFTBOT: + image->adjustments = ROTATECW_270; + break; + default: + image->adjustments = 0; + image->orientation = ORIENTATION_TOPLEFT; + } + + if ((bps == 0) || (spp == 0)) + { + TIFFError("loadImage", "Invalid samples per pixel (%d) or bits per sample (%d)", + spp, bps); + return (-1); + } + + if (TIFFIsTiled(in)) + { + readunit = TILE; + tlsize = TIFFTileSize(in); + ntiles = TIFFNumberOfTiles(in); + TIFFGetField(in, TIFFTAG_TILEWIDTH, &tw); + TIFFGetField(in, TIFFTAG_TILELENGTH, &tl); + + tile_rowsize = TIFFTileRowSize(in); + buffsize = tlsize * ntiles; + + + if (buffsize < (uint32)(ntiles * tl * tile_rowsize)) + { + buffsize = ntiles * tl * tile_rowsize; +#ifdef DEBUG2 + TIFFError("loadImage", + "Tilesize %u is too small, using ntiles * tilelength * tilerowsize %lu", + tlsize, (unsigned long)buffsize); +#endif + } + + if (dump->infile != NULL) + dump_info (dump->infile, dump->format, "", + "Tilesize: %u, Number of Tiles: %u, Tile row size: %u", + tlsize, ntiles, tile_rowsize); + } + else + { + readunit = STRIP; + TIFFGetFieldDefaulted(in, TIFFTAG_ROWSPERSTRIP, &rowsperstrip); + stsize = TIFFStripSize(in); + nstrips = TIFFNumberOfStrips(in); + buffsize = stsize * nstrips; + + if (buffsize < (uint32) (((length * width * spp * bps) + 7) / 8)) + { + buffsize = ((length * width * spp * bps) + 7) / 8; +#ifdef DEBUG2 + TIFFError("loadImage", + "Stripsize %u is too small, using imagelength * width * spp * bps / 8 = %lu", + stsize, (unsigned long)buffsize); +#endif + } + + if (dump->infile != NULL) + dump_info (dump->infile, dump->format, "", + "Stripsize: %u, Number of Strips: %u, Rows per Strip: %u, Scanline size: %u", + stsize, nstrips, rowsperstrip, scanlinesize); + } + + if (input_compression == COMPRESSION_JPEG) + { /* Force conversion to RGB */ + jpegcolormode = JPEGCOLORMODE_RGB; + TIFFSetField(in, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RGB); + } + /* The clause up to the read statement is taken from Tom Lane's tiffcp patch */ + else + { /* Otherwise, can't handle subsampled input */ + if (input_photometric == PHOTOMETRIC_YCBCR) + { + TIFFGetFieldDefaulted(in, TIFFTAG_YCBCRSUBSAMPLING, + &subsampling_horiz, &subsampling_vert); + if (subsampling_horiz != 1 || subsampling_vert != 1) + { + TIFFError("loadImage", + "Can't copy/convert subsampled image with subsampling %d horiz %d vert", + subsampling_horiz, subsampling_vert); + return (-1); + } + } + } + + read_buff = *read_ptr; + if (!read_buff) + read_buff = (unsigned char *)_TIFFmalloc(buffsize); + else + { + if (prev_readsize < buffsize) + { + new_buff = _TIFFrealloc(read_buff, buffsize); + if (!new_buff) + { + free (read_buff); + read_buff = (unsigned char *)_TIFFmalloc(buffsize); + } + else + read_buff = new_buff; + } + } + + if (!read_buff) + { + TIFFError("loadImage", "Unable to allocate/reallocate read buffer"); + return (-1); + } + + prev_readsize = buffsize; + *read_ptr = read_buff; + + /* N.B. The read functions used copy separate plane data into a buffer as interleaved + * samples rather than separate planes so the same logic works to extract regions + * regardless of the way the data are organized in the input file. + */ + switch (readunit) { + case STRIP: + if (planar == PLANARCONFIG_CONTIG) + { + if (!(readContigStripsIntoBuffer(in, read_buff))) + { + TIFFError("loadImage", "Unable to read contiguous strips into buffer"); + return (-1); + } + } + else + { + if (!(readSeparateStripsIntoBuffer(in, read_buff, length, width, spp, dump))) + { + TIFFError("loadImage", "Unable to read separate strips into buffer"); + return (-1); + } + } + break; + + case TILE: + if (planar == PLANARCONFIG_CONTIG) + { + if (!(readContigTilesIntoBuffer(in, read_buff, length, width, tw, tl, spp, bps))) + { + TIFFError("loadImage", "Unable to read contiguous tiles into buffer"); + return (-1); + } + } + else + { + if (!(readSeparateTilesIntoBuffer(in, read_buff, length, width, tw, tl, spp, bps))) + { + TIFFError("loadImage", "Unable to read separate tiles into buffer"); + return (-1); + } + } + break; + default: TIFFError("loadImage", "Unsupported image file format"); + return (-1); + break; + } + if ((dump->infile != NULL) && (dump->level == 2)) + { + dump_info (dump->infile, dump->format, "loadImage", + "Image width %d, length %d, Raw image data, %4d bytes", + width, length, buffsize); + dump_info (dump->infile, dump->format, "", + "Bits per sample %d, Samples per pixel %d", bps, spp); + + for (i = 0; i < length; i++) + dump_buffer(dump->infile, dump->format, 1, scanlinesize, + i, read_buff + (i * scanlinesize)); + } + return (0); + } /* end loadImage */ + +static int correct_orientation(struct image_data *image, unsigned char **work_buff_ptr) + { + uint16 mirror, rotation; + unsigned char *work_buff; + + work_buff = *work_buff_ptr; + if ((image == NULL) || (work_buff == NULL)) + { + TIFFError ("correct_orientatin", "Invalid image or buffer pointer"); + return (-1); + } + + if ((image->adjustments & MIRROR_HORIZ) || (image->adjustments & MIRROR_VERT)) + { + mirror = (uint16)(image->adjustments & MIRROR_BOTH); + if (mirrorImage(image->spp, image->bps, mirror, + image->width, image->length, work_buff)) + { + TIFFError ("correct_orientation", "Unable to mirror image"); + return (-1); + } + } + + if (image->adjustments & ROTATE_ANY) + { + if (image->adjustments & ROTATECW_90) + rotation = (uint16) 90; + else + if (image->adjustments & ROTATECW_180) + rotation = (uint16) 180; + else + if (image->adjustments & ROTATECW_270) + rotation = (uint16) 270; + else + { + TIFFError ("correct_orientation", "Invalid rotation value: %d", + image->adjustments & ROTATE_ANY); + return (-1); + } + + if (rotateImage(rotation, image, &image->width, &image->length, work_buff_ptr)) + { + TIFFError ("correct_orientation", "Unable to rotate image"); + return (-1); + } + image->orientation = ORIENTATION_TOPLEFT; + } + + return (0); + } /* end correct_orientation */ + + +/* Extract multiple zones from an image and combine into a single composite image */ +static int +extractCompositeRegions(struct image_data *image, struct crop_mask *crop, + unsigned char *read_buff, unsigned char *crop_buff) + { + int shift_width, bytes_per_sample, bytes_per_pixel; + uint32 i, trailing_bits, prev_trailing_bits; + uint32 row, first_row, last_row, first_col, last_col; + uint32 src_rowsize, dst_rowsize, src_offset, dst_offset; + uint32 crop_width, crop_length, img_width, img_length; + uint32 prev_length, prev_width, composite_width; + uint16 bps, spp; + uint8 *src, *dst; + tsample_t count, sample = 0; /* Update to extract one or more samples */ + + img_width = image->width; + img_length = image->length; + bps = image->bps; + spp = image->spp; + count = spp; + + bytes_per_sample = (bps + 7) / 8; + bytes_per_pixel = ((bps * spp) + 7) / 8; + if ((bps % 8) == 0) + shift_width = 0; + else + { + if (bytes_per_pixel < (bytes_per_sample + 1)) + shift_width = bytes_per_pixel; + else + shift_width = bytes_per_sample + 1; + } + src = read_buff; + dst = crop_buff; + + /* These are setup for adding additional sections */ + prev_width = prev_length = 0; + prev_trailing_bits = trailing_bits = 0; + composite_width = crop->combined_width; + crop->combined_width = 0; + crop->combined_length = 0; + + for (i = 0; i < crop->selections; i++) + { + /* rows, columns, width, length are expressed in pixels */ + first_row = crop->regionlist[i].y1; + last_row = crop->regionlist[i].y2; + first_col = crop->regionlist[i].x1; + last_col = crop->regionlist[i].x2; + + crop_width = last_col - first_col + 1; + crop_length = last_row - first_row + 1; + + /* These should not be needed for composite images */ + crop->regionlist[i].width = crop_width; + crop->regionlist[i].length = crop_length; + crop->regionlist[i].buffptr = crop_buff; + + src_rowsize = ((img_width * bps * spp) + 7) / 8; + dst_rowsize = (((crop_width * bps * count) + 7) / 8); + + switch (crop->edge_ref) + { + default: + case EDGE_TOP: + case EDGE_BOTTOM: + if ((i > 0) && (crop_width != crop->regionlist[i - 1].width)) + { + TIFFError ("extractCompositeRegions", + "Only equal width regions can be combined for -E top or bottom"); + return (1); + } + + crop->combined_width = crop_width; + crop->combined_length += crop_length; + + for (row = first_row; row <= last_row; row++) + { + src_offset = row * src_rowsize; + dst_offset = (row - first_row) * dst_rowsize; + src = read_buff + src_offset; + dst = crop_buff + dst_offset + (prev_length * dst_rowsize); + switch (shift_width) + { + case 0: if (extractContigSamplesBytes (src, dst, img_width, sample, + spp, bps, count, first_col, + last_col + 1)) + { + TIFFError("extractCompositeRegions", + "Unable to extract row %d", row); + return (1); + } + break; + case 1: if (bps == 1) + { + if (extractContigSamplesShifted8bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractCompositeRegions", + "Unable to extract row %d", row); + return (1); + } + break; + } + else + if (extractContigSamplesShifted16bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractCompositeRegions", + "Unable to extract row %d", row); + return (1); + } + break; + case 2: if (extractContigSamplesShifted24bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractCompositeRegions", + "Unable to extract row %d", row); + return (1); + } + break; + case 3: + case 4: + case 5: if (extractContigSamplesShifted32bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractCompositeRegions", + "Unable to extract row %d", row); + return (1); + } + break; + default: TIFFError("extractCompositeRegions", "Unsupported bit depth %d", bps); + return (1); + } + } + prev_length += crop_length; + break; + case EDGE_LEFT: /* splice the pieces of each row together, side by side */ + case EDGE_RIGHT: + if ((i > 0) && (crop_length != crop->regionlist[i - 1].length)) + { + TIFFError ("extractCompositeRegions", + "Only equal length regions can be combined for -E left or right"); + return (1); + } + crop->combined_width += crop_width; + crop->combined_length = crop_length; + dst_rowsize = (((composite_width * bps * count) + 7) / 8); + trailing_bits = (crop_width * bps * count) % 8; + for (row = first_row; row <= last_row; row++) + { + src_offset = row * src_rowsize; + dst_offset = (row - first_row) * dst_rowsize; + src = read_buff + src_offset; + dst = crop_buff + dst_offset + prev_width; + + switch (shift_width) + { + case 0: if (extractContigSamplesBytes (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1)) + { + TIFFError("extractCompositeRegions", + "Unable to extract row %d", row); + return (1); + } + break; + case 1: if (bps == 1) + { + if (extractContigSamplesShifted8bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractCompositeRegions", + "Unable to extract row %d", row); + return (1); + } + break; + } + else + if (extractContigSamplesShifted16bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractCompositeRegions", + "Unable to extract row %d", row); + return (1); + } + break; + case 2: if (extractContigSamplesShifted24bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractCompositeRegions", + "Unable to extract row %d", row); + return (1); + } + break; + case 3: + case 4: + case 5: if (extractContigSamplesShifted32bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractCompositeRegions", + "Unable to extract row %d", row); + return (1); + } + break; + default: TIFFError("extractCompositeRegions", "Unsupported bit depth %d", bps); + return (1); + } + } + prev_width += (crop_width * bps * count) / 8; + prev_trailing_bits += trailing_bits; + if (prev_trailing_bits > 7) + prev_trailing_bits-= 8; + break; + } + } + if (crop->combined_width != composite_width) + TIFFError("combineSeparateRegions","Combined width does not match composite width"); + + return (0); + } /* end extractCompositeRegions */ + +/* Copy a single region of input buffer to an output buffer. + * The read functions used copy separate plane data into a buffer + * as interleaved samples rather than separate planes so the same + * logic works to extract regions regardless of the way the data + * are organized in the input file. This function can be used to + * extract one or more samples from the input image by updating the + * parameters for starting sample and number of samples to copy in the + * fifth and eighth arguments of the call to extractContigSamples. + * They would be passed as new elements of the crop_mask struct. + */ + +static int +extractSeparateRegion(struct image_data *image, struct crop_mask *crop, + unsigned char *read_buff, unsigned char *crop_buff, + int region) + { + int shift_width, prev_trailing_bits = 0; + uint32 bytes_per_sample, bytes_per_pixel; + uint32 src_rowsize, dst_rowsize; + uint32 row, first_row, last_row, first_col, last_col; + uint32 src_offset, dst_offset; + uint32 crop_width, crop_length, img_width, img_length; + uint16 bps, spp; + uint8 *src, *dst; + tsample_t count, sample = 0; /* Update to extract more or more samples */ + + img_width = image->width; + img_length = image->length; + bps = image->bps; + spp = image->spp; + count = spp; + + bytes_per_sample = (bps + 7) / 8; + bytes_per_pixel = ((bps * spp) + 7) / 8; + if ((bps % 8) == 0) + shift_width = 0; /* Byte aligned data only */ + else + { + if (bytes_per_pixel < (bytes_per_sample + 1)) + shift_width = bytes_per_pixel; + else + shift_width = bytes_per_sample + 1; + } + + /* rows, columns, width, length are expressed in pixels */ + first_row = crop->regionlist[region].y1; + last_row = crop->regionlist[region].y2; + first_col = crop->regionlist[region].x1; + last_col = crop->regionlist[region].x2; + + crop_width = last_col - first_col + 1; + crop_length = last_row - first_row + 1; + + crop->regionlist[region].width = crop_width; + crop->regionlist[region].length = crop_length; + crop->regionlist[region].buffptr = crop_buff; + + src = read_buff; + dst = crop_buff; + src_rowsize = ((img_width * bps * spp) + 7) / 8; + dst_rowsize = (((crop_width * bps * spp) + 7) / 8); + + for (row = first_row; row <= last_row; row++) + { + src_offset = row * src_rowsize; + dst_offset = (row - first_row) * dst_rowsize; + src = read_buff + src_offset; + dst = crop_buff + dst_offset; + + switch (shift_width) + { + case 0: if (extractContigSamplesBytes (src, dst, img_width, sample, + spp, bps, count, first_col, + last_col + 1)) + { + TIFFError("extractSeparateRegion", + "Unable to extract row %d", row); + return (1); + } + break; + case 1: if (bps == 1) + { + if (extractContigSamplesShifted8bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractSeparateRegion", + "Unable to extract row %d", row); + return (1); + } + break; + } + else + if (extractContigSamplesShifted16bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractSeparateRegion", + "Unable to extract row %d", row); + return (1); + } + break; + case 2: if (extractContigSamplesShifted24bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractSeparateRegion", + "Unable to extract row %d", row); + return (1); + } + break; + case 3: + case 4: + case 5: if (extractContigSamplesShifted32bits (src, dst, img_width, + sample, spp, bps, count, + first_col, last_col + 1, + prev_trailing_bits)) + { + TIFFError("extractSeparateRegion", + "Unable to extract row %d", row); + return (1); + } + break; + default: TIFFError("extractSeparateRegion", "Unsupported bit depth %d", bps); + return (1); + } + } + + return (0); + } /* end extractSeparateRegion */ + +static int +extractImageSection(struct image_data *image, struct pageseg *section, + unsigned char *src_buff, unsigned char *sect_buff) + { + unsigned char bytebuff1, bytebuff2; + unsigned char *src, *dst; + + uint32 img_width, img_length, img_rowsize; + uint32 j, shift1, shift2, trailing_bits; + uint32 row, first_row, last_row, first_col, last_col; + uint32 src_offset, dst_offset, row_offset, col_offset; + uint32 offset1, offset2, full_bytes; + uint32 sect_width, sect_length; + uint16 bps, spp; + +#ifdef DEVELMODE + int k; + unsigned char bitset; + static char *bitarray = NULL; +#endif + + img_width = image->width; + img_length = image->length; + bps = image->bps; + spp = image->spp; + + src = src_buff; + dst = sect_buff; + src_offset = 0; + dst_offset = 0; + +#ifdef DEVELMODE + if (bitarray == NULL) + { + if ((bitarray = (char *)malloc(img_width)) == NULL) + { + TIFFError ("", "DEBUG: Unable to allocate debugging bitarray"); + return (-1); + } + } +#endif + + /* rows, columns, width, length are expressed in pixels */ + first_row = section->y1; + last_row = section->y2; + first_col = section->x1; + last_col = section->x2; + + sect_width = last_col - first_col + 1; + sect_length = last_row - first_row + 1; + img_rowsize = ((img_width * bps + 7) / 8) * spp; + full_bytes = (sect_width * spp * bps) / 8; /* number of COMPLETE bytes per row in section */ + trailing_bits = (sect_width * bps) % 8; + +#ifdef DEVELMODE + TIFFError ("", "First row: %d, last row: %d, First col: %d, last col: %d\n", + first_row, last_row, first_col, last_col); + TIFFError ("", "Image width: %d, Image length: %d, bps: %d, spp: %d\n", + img_width, img_length, bps, spp); + TIFFError ("", "Sect width: %d, Sect length: %d, full bytes: %d trailing bits %d\n", + sect_width, sect_length, full_bytes, trailing_bits); +#endif + + if ((bps % 8) == 0) + { + col_offset = first_col * spp * bps / 8; + for (row = first_row; row <= last_row; row++) + { + /* row_offset = row * img_width * spp * bps / 8; */ + row_offset = row * img_rowsize; + src_offset = row_offset + col_offset; + +#ifdef DEVELMODE + TIFFError ("", "Src offset: %8d, Dst offset: %8d", src_offset, dst_offset); +#endif + _TIFFmemcpy (sect_buff + dst_offset, src_buff + src_offset, full_bytes); + dst_offset += full_bytes; + } + } + else + { /* bps != 8 */ + shift1 = spp * ((first_col * bps) % 8); + shift2 = spp * ((last_col * bps) % 8); + for (row = first_row; row <= last_row; row++) + { + /* pull out the first byte */ + row_offset = row * img_rowsize; + offset1 = row_offset + (first_col * bps / 8); + offset2 = row_offset + (last_col * bps / 8); + +#ifdef DEVELMODE + for (j = 0, k = 7; j < 8; j++, k--) + { + bitset = *(src_buff + offset1) & (((unsigned char)1 << k)) ? 1 : 0; + sprintf(&bitarray[j], (bitset) ? "1" : "0"); + } + sprintf(&bitarray[8], " "); + sprintf(&bitarray[9], " "); + for (j = 10, k = 7; j < 18; j++, k--) + { + bitset = *(src_buff + offset2) & (((unsigned char)1 << k)) ? 1 : 0; + sprintf(&bitarray[j], (bitset) ? "1" : "0"); + } + bitarray[18] = '\0'; + TIFFError ("", "Row: %3d Offset1: %d, Shift1: %d, Offset2: %d, Shift2: %d\n", + row, offset1, shift1, offset2, shift2); +#endif + + bytebuff1 = bytebuff2 = 0; + if (shift1 == 0) /* the region is byte and sample alligned */ + { + _TIFFmemcpy (sect_buff + dst_offset, src_buff + offset1, full_bytes); + +#ifdef DEVELMODE + TIFFError ("", " Alligned data src offset1: %8d, Dst offset: %8d\n", offset1, dst_offset); + sprintf(&bitarray[18], "\n"); + sprintf(&bitarray[19], "\t"); + for (j = 20, k = 7; j < 28; j++, k--) + { + bitset = *(sect_buff + dst_offset) & (((unsigned char)1 << k)) ? 1 : 0; + sprintf(&bitarray[j], (bitset) ? "1" : "0"); + } + bitarray[28] = ' '; + bitarray[29] = ' '; +#endif + dst_offset += full_bytes; + + if (trailing_bits != 0) + { + bytebuff2 = src_buff[offset2] & ((unsigned char)255 << (7 - shift2)); + sect_buff[dst_offset] = bytebuff2; +#ifdef DEVELMODE + TIFFError ("", " Trailing bits src offset: %8d, Dst offset: %8d\n", + offset2, dst_offset); + for (j = 30, k = 7; j < 38; j++, k--) + { + bitset = *(sect_buff + dst_offset) & (((unsigned char)1 << k)) ? 1 : 0; + sprintf(&bitarray[j], (bitset) ? "1" : "0"); + } + bitarray[38] = '\0'; + TIFFError ("", "\tFirst and last bytes before and after masking:\n\t%s\n\n", bitarray); +#endif + dst_offset++; + } + } + else /* each destination byte will have to be built from two source bytes*/ + { +#ifdef DEVELMODE + TIFFError ("", " Unalligned data src offset: %8d, Dst offset: %8d\n", offset1 , dst_offset); +#endif + for (j = 0; j <= full_bytes; j++) + { + bytebuff1 = src_buff[offset1 + j] & ((unsigned char)255 >> shift1); + bytebuff2 = src_buff[offset1 + j + 1] & ((unsigned char)255 << (7 - shift1)); + sect_buff[dst_offset + j] = (bytebuff1 << shift1) | (bytebuff2 >> (8 - shift1)); + } +#ifdef DEVELMODE + sprintf(&bitarray[18], "\n"); + sprintf(&bitarray[19], "\t"); + for (j = 20, k = 7; j < 28; j++, k--) + { + bitset = *(sect_buff + dst_offset) & (((unsigned char)1 << k)) ? 1 : 0; + sprintf(&bitarray[j], (bitset) ? "1" : "0"); + } + bitarray[28] = ' '; + bitarray[29] = ' '; +#endif + dst_offset += full_bytes; + + if (trailing_bits != 0) + { +#ifdef DEVELMODE + TIFFError ("", " Trailing bits src offset: %8d, Dst offset: %8d\n", offset1 + full_bytes, dst_offset); +#endif + if (shift2 > shift1) + { + bytebuff1 = src_buff[offset1 + full_bytes] & ((unsigned char)255 << (7 - shift2)); + bytebuff2 = bytebuff1 & ((unsigned char)255 << shift1); + sect_buff[dst_offset] = bytebuff2; +#ifdef DEVELMODE + TIFFError ("", " Shift2 > Shift1\n"); +#endif + } + else + { + if (shift2 < shift1) + { + bytebuff2 = ((unsigned char)255 << (shift1 - shift2 - 1)); + sect_buff[dst_offset] &= bytebuff2; +#ifdef DEVELMODE + TIFFError ("", " Shift2 < Shift1\n"); +#endif + } +#ifdef DEVELMODE + else + TIFFError ("", " Shift2 == Shift1\n"); +#endif + } + } +#ifdef DEVELMODE + sprintf(&bitarray[28], " "); + sprintf(&bitarray[29], " "); + for (j = 30, k = 7; j < 38; j++, k--) + { + bitset = *(sect_buff + dst_offset) & (((unsigned char)1 << k)) ? 1 : 0; + sprintf(&bitarray[j], (bitset) ? "1" : "0"); + } + bitarray[38] = '\0'; + TIFFError ("", "\tFirst and last bytes before and after masking:\n\t%s\n\n", bitarray); +#endif + dst_offset++; + } + } + } + + return (0); + } /* end extractImageSection */ + +static int +writeSelections(TIFF *in, TIFF **out, struct crop_mask *crop, + struct image_data *image, struct dump_opts *dump, + struct buffinfo seg_buffs[], char *mp, char *filename, + unsigned int *page, unsigned int total_pages) + { + int i, page_count; + int autoindex = 0; + unsigned char *crop_buff = NULL; + + /* Where we open a new file depends on the export mode */ + switch (crop->exp_mode) + { + case ONE_FILE_COMPOSITE: /* Regions combined into single image */ + autoindex = 0; + crop_buff = seg_buffs[0].buffer; + if (update_output_file (out, mp, autoindex, filename, page)) + return (1); + page_count = total_pages; + if (writeCroppedImage(in, *out, image, dump, + crop->combined_width, + crop->combined_length, + crop_buff, *page, total_pages)) + { + TIFFError("writeRegions", "Unable to write new image"); + return (-1); + } + break; + case ONE_FILE_SEPARATED: /* Regions as separated images */ + autoindex = 0; + if (update_output_file (out, mp, autoindex, filename, page)) + return (1); + page_count = crop->selections * total_pages; + for (i = 0; i < crop->selections; i++) + { + crop_buff = seg_buffs[i].buffer; + if (writeCroppedImage(in, *out, image, dump, + crop->regionlist[i].width, + crop->regionlist[i].length, + crop_buff, *page, page_count)) + { + TIFFError("writeRegions", "Unable to write new image"); + return (-1); + } + } + break; + case FILE_PER_IMAGE_COMPOSITE: /* Regions as composite image */ + autoindex = 1; + if (update_output_file (out, mp, autoindex, filename, page)) + return (1); + + crop_buff = seg_buffs[0].buffer; + if (writeCroppedImage(in, *out, image, dump, + crop->combined_width, + crop->combined_length, + crop_buff, *page, total_pages)) + { + TIFFError("writeRegions", "Unable to write new image"); + return (-1); + } + break; + case FILE_PER_IMAGE_SEPARATED: /* Regions as separated images */ + autoindex = 1; + page_count = crop->selections; + if (update_output_file (out, mp, autoindex, filename, page)) + return (1); + + for (i = 0; i < crop->selections; i++) + { + crop_buff = seg_buffs[i].buffer; + /* Write the current region to the current file */ + if (writeCroppedImage(in, *out, image, dump, + crop->regionlist[i].width, + crop->regionlist[i].length, + crop_buff, *page, page_count)) + { + TIFFError("writeRegions", "Unable to write new image"); + return (-1); + } + } + break; + case FILE_PER_SELECTION: + autoindex = 1; + page_count = 1; + for (i = 0; i < crop->selections; i++) + { + if (update_output_file (out, mp, autoindex, filename, page)) + return (1); + + crop_buff = seg_buffs[i].buffer; + /* Write the current region to the current file */ + if (writeCroppedImage(in, *out, image, dump, + crop->regionlist[i].width, + crop->regionlist[i].length, + crop_buff, *page, page_count)) + { + TIFFError("writeRegions", "Unable to write new image"); + return (-1); + } + } + break; + default: return (1); + } + + return (0); + } /* end writeRegions */ + +static int +writeImageSections(TIFF *in, TIFF *out, struct image_data *image, + struct pagedef *page, struct pageseg *sections, + struct dump_opts * dump, unsigned char *src_buff, + unsigned char **sect_buff_ptr) + { + double hres, vres; + uint32 i, k, width, length, sectsize; + unsigned char *sect_buff = *sect_buff_ptr; + + hres = page->hres; + vres = page->vres; + + k = page->cols * page->rows; + if ((k < 1) || (k > MAX_SECTIONS)) + { + TIFFError("writeImageSections", + "%d Rows and Columns exceed maximum sections\nIncrease resolution or reduce sections", k); + return (-1); + } + + for (i = 0; i < k; i++) + { + width = sections[i].x2 - sections[i].x1 + 1; + length = sections[i].y2 - sections[i].y1 + 1; + sectsize = (uint32) + ceil((width * image->bps + 7) / (double)8) * image->spp * length; + /* allocate a buffer if we don't have one already */ + if (createImageSection(sectsize, sect_buff_ptr)) + { + TIFFError("writeImageSections", "Unable to allocate section buffer"); + exit (-1); + } + sect_buff = *sect_buff_ptr; + + if (extractImageSection (image, §ions[i], src_buff, sect_buff)) + { + TIFFError("writeImageSections", "Unable to extract image sections"); + exit (-1); + } + + /* call the write routine here instead of outside the loop */ + if (writeSingleSection(in, out, image, dump, width, length, hres, vres, sect_buff)) + { + TIFFError("writeImageSections", "Unable to write image section"); + exit (-1); + } + } + + return (0); + } /* end writeImageSections */ + +/* Code in this function is heavily indebted to code in tiffcp + * with modifications by Richard Nolde to handle orientation correctly. + * It will have to be updated significantly if support is added to + * extract one or more samples from original image since the + * original code assumes we are always copying all samples. + */ +static int +writeSingleSection(TIFF *in, TIFF *out, struct image_data *image, + struct dump_opts *dump, uint32 width, uint32 length, + double hres, double vres, + unsigned char *sect_buff) + { + uint16 bps, spp; + uint16 input_compression, input_photometric; + uint16 input_planar; + struct cpTag* p; + + /* Calling this seems to reset the compression mode on the TIFF *in file. + TIFFGetField(in, TIFFTAG_JPEGCOLORMODE, &input_jpeg_colormode); + */ + input_compression = image->compression; + input_photometric = image->photometric; + + spp = image->spp; + bps = image->bps; + TIFFSetField(out, TIFFTAG_IMAGEWIDTH, width); + TIFFSetField(out, TIFFTAG_IMAGELENGTH, length); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, bps); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, spp); + +#ifdef DEBUG2 + TIFFError("writeSingleSection", "Input compression: %s", + (input_compression == COMPRESSION_OJPEG) ? "Old Jpeg" : + ((input_compression == COMPRESSION_JPEG) ? "New Jpeg" : "Non Jpeg")); +#endif + /* This is the global variable compression which is set + * if the user has specified a command line option for + * a compression option. Should be passed around in one + * of the parameters instead of as a global. If no user + * option specified it will still be (uint16) -1. */ + if (compression != (uint16)-1) + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + else + { /* OJPEG is no longer supported for writing so upgrade to JPEG */ + if (input_compression == COMPRESSION_OJPEG) + { + compression = COMPRESSION_JPEG; + jpegcolormode = JPEGCOLORMODE_RAW; + TIFFSetField(out, TIFFTAG_COMPRESSION, COMPRESSION_JPEG); + } + else /* Use the compression from the input file */ + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + } + + if (compression == COMPRESSION_JPEG) + { + if ((input_photometric == PHOTOMETRIC_PALETTE) || /* color map indexed */ + (input_photometric == PHOTOMETRIC_MASK)) /* holdout mask */ + { + TIFFError ("writeSingleSection", + "JPEG compression cannot be used with %s image data", + (input_photometric == PHOTOMETRIC_PALETTE) ? + "palette" : "mask"); + return (-1); + } + if ((input_photometric == PHOTOMETRIC_RGB) && + (jpegcolormode == JPEGCOLORMODE_RGB)) + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_YCBCR); + else + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, input_photometric); + } + else + { + if (compression == COMPRESSION_SGILOG || compression == COMPRESSION_SGILOG24) + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, spp == 1 ? + PHOTOMETRIC_LOGL : PHOTOMETRIC_LOGLUV); + else + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, image->photometric); + } + +#ifdef DEBUG2 + TIFFError("writeSingleSection", "Input photometric: %s", + (input_photometric == PHOTOMETRIC_RGB) ? "RGB" : + ((input_photometric == PHOTOMETRIC_YCBCR) ? "YCbCr" : "Not RGB or YCbCr")); +#endif + + if (((input_photometric == PHOTOMETRIC_LOGL) || + (input_photometric == PHOTOMETRIC_LOGLUV)) && + ((compression != COMPRESSION_SGILOG) && + (compression != COMPRESSION_SGILOG24))) + { + TIFFError("writeSingleSection", + "LogL and LogLuv source data require SGI_LOG or SGI_LOG24 compression"); + return (-1); + } + + if (fillorder != 0) + TIFFSetField(out, TIFFTAG_FILLORDER, fillorder); + else + CopyTag(TIFFTAG_FILLORDER, 1, TIFF_SHORT); + + /* The loadimage function reads input orientation and sets + * image->orientation. The correct_image_orientation function + * applies the required rotation and mirror operations to + * present the data in TOPLEFT orientation and updates + * image->orientation if any transforms are performed, + * as per EXIF standard. + */ + TIFFSetField(out, TIFFTAG_ORIENTATION, image->orientation); + + /* + * Choose tiles/strip for the output image according to + * the command line arguments (-tiles, -strips) and the + * structure of the input image. + */ + if (outtiled == -1) + outtiled = TIFFIsTiled(in); + if (outtiled) { + /* + * Setup output file's tile width&height. If either + * is not specified, use either the value from the + * input image or, if nothing is defined, use the + * library default. + */ + if (tilewidth == (uint32) 0) + TIFFGetField(in, TIFFTAG_TILEWIDTH, &tilewidth); + if (tilelength == (uint32) 0) + TIFFGetField(in, TIFFTAG_TILELENGTH, &tilelength); + + if (tilewidth == 0 || tilelength == 0) + TIFFDefaultTileSize(out, &tilewidth, &tilelength); + TIFFDefaultTileSize(out, &tilewidth, &tilelength); + TIFFSetField(out, TIFFTAG_TILEWIDTH, tilewidth); + TIFFSetField(out, TIFFTAG_TILELENGTH, tilelength); + } else { + /* + * RowsPerStrip is left unspecified: use either the + * value from the input image or, if nothing is defined, + * use the library default. + */ + if (rowsperstrip == (uint32) 0) + { + if (!TIFFGetField(in, TIFFTAG_ROWSPERSTRIP, &rowsperstrip)) + rowsperstrip = TIFFDefaultStripSize(out, rowsperstrip); + if (compression != COMPRESSION_JPEG) + { + if (rowsperstrip > length) + rowsperstrip = length; + } + } + else + if (rowsperstrip == (uint32) -1) + rowsperstrip = length; + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, rowsperstrip); + } + + TIFFGetFieldDefaulted(in, TIFFTAG_PLANARCONFIG, &input_planar); + if (config != (uint16) -1) + TIFFSetField(out, TIFFTAG_PLANARCONFIG, config); + else + CopyField(TIFFTAG_PLANARCONFIG, config); + if (spp <= 4) + CopyTag(TIFFTAG_TRANSFERFUNCTION, 4, TIFF_SHORT); + CopyTag(TIFFTAG_COLORMAP, 4, TIFF_SHORT); + +/* SMinSampleValue & SMaxSampleValue */ + switch (compression) { + /* These are references to GLOBAL variables set by defaults + * and /or the compression flag + */ + case COMPRESSION_JPEG: + if (((bps % 8) == 0) || ((bps % 12) == 0)) + { + TIFFSetField(out, TIFFTAG_JPEGQUALITY, quality); + TIFFSetField(out, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RGB); + } + else + { + TIFFError("writeSingleSection", + "JPEG compression requires 8 or 12 bits per sample"); + return (-1); + } + break; + case COMPRESSION_LZW: + case COMPRESSION_ADOBE_DEFLATE: + case COMPRESSION_DEFLATE: + if (predictor != (uint16)-1) + TIFFSetField(out, TIFFTAG_PREDICTOR, predictor); + else + CopyField(TIFFTAG_PREDICTOR, predictor); + break; + case COMPRESSION_CCITTFAX3: + case COMPRESSION_CCITTFAX4: + if (compression == COMPRESSION_CCITTFAX3) { + if (g3opts != (uint32) -1) + TIFFSetField(out, TIFFTAG_GROUP3OPTIONS, g3opts); + else + CopyField(TIFFTAG_GROUP3OPTIONS, g3opts); + } else + CopyTag(TIFFTAG_GROUP4OPTIONS, 1, TIFF_LONG); + CopyTag(TIFFTAG_BADFAXLINES, 1, TIFF_LONG); + CopyTag(TIFFTAG_CLEANFAXDATA, 1, TIFF_LONG); + CopyTag(TIFFTAG_CONSECUTIVEBADFAXLINES, 1, TIFF_LONG); + CopyTag(TIFFTAG_FAXRECVPARAMS, 1, TIFF_LONG); + CopyTag(TIFFTAG_FAXRECVTIME, 1, TIFF_LONG); + CopyTag(TIFFTAG_FAXSUBADDRESS, 1, TIFF_ASCII); + break; + } + { uint32 len32; + void** data; + if (TIFFGetField(in, TIFFTAG_ICCPROFILE, &len32, &data)) + TIFFSetField(out, TIFFTAG_ICCPROFILE, len32, data); + } + { uint16 ninks; + const char* inknames; + if (TIFFGetField(in, TIFFTAG_NUMBEROFINKS, &ninks)) { + TIFFSetField(out, TIFFTAG_NUMBEROFINKS, ninks); + if (TIFFGetField(in, TIFFTAG_INKNAMES, &inknames)) { + int inknameslen = strlen(inknames) + 1; + const char* cp = inknames; + while (ninks > 1) { + cp = strchr(cp, '\0'); + if (cp) { + cp++; + inknameslen += (strlen(cp) + 1); + } + ninks--; + } + TIFFSetField(out, TIFFTAG_INKNAMES, inknameslen, inknames); + } + } + } + { + unsigned short pg0, pg1; + if (TIFFGetField(in, TIFFTAG_PAGENUMBER, &pg0, &pg1)) { + if (pageNum < 0) /* only one input file */ + TIFFSetField(out, TIFFTAG_PAGENUMBER, pg0, pg1); + else + TIFFSetField(out, TIFFTAG_PAGENUMBER, pageNum++, 0); + } + } + + for (p = tags; p < &tags[NTAGS]; p++) + CopyTag(p->tag, p->count, p->type); + + /* Update these since they are overwritten from input res by loop above */ + TIFFSetField(out, TIFFTAG_XRESOLUTION, (float)hres); + TIFFSetField(out, TIFFTAG_YRESOLUTION, (float)vres); + + /* Compute the tile or strip dimensions and write to disk */ + if (outtiled) + { + if (config == PLANARCONFIG_CONTIG) + writeBufferToContigTiles (out, sect_buff, length, width, spp, dump); + else + writeBufferToSeparateTiles (out, sect_buff, length, width, spp, dump); + } + else + { + if (config == PLANARCONFIG_CONTIG) + writeBufferToContigStrips (out, sect_buff, length); + else + writeBufferToSeparateStrips(out, sect_buff, length, width, spp, dump); + } + + if (!TIFFWriteDirectory(out)) + { + TIFFClose(out); + return (-1); + } + + return (0); + } /* end writeSingleSection */ + + +/* Create a buffer to write one section at a time */ +static int +createImageSection(uint32 sectsize, unsigned char **sect_buff_ptr) + { + unsigned char *sect_buff = NULL; + unsigned char *new_buff = NULL; + static uint32 prev_sectsize = 0; + + sect_buff = *sect_buff_ptr; + + if (!sect_buff) + { + sect_buff = (unsigned char *)_TIFFmalloc(sectsize); + *sect_buff_ptr = sect_buff; + _TIFFmemset(sect_buff, 0, sectsize); + } + else + { + if (prev_sectsize < sectsize) + { + new_buff = _TIFFrealloc(sect_buff, sectsize); + if (!new_buff) + { + free (sect_buff); + sect_buff = (unsigned char *)_TIFFmalloc(sectsize); + } + else + sect_buff = new_buff; + + _TIFFmemset(sect_buff, 0, sectsize); + } + } + + if (!sect_buff) + { + TIFFError("createImageSection", "Unable to allocate/reallocate section buffer"); + return (-1); + } + prev_sectsize = sectsize; + *sect_buff_ptr = sect_buff; + + return (0); + } /* end createImageSection */ + + +/* Process selections defined by regions, zones, margins, or fixed sized areas */ +static int +processCropSelections(struct image_data *image, struct crop_mask *crop, + unsigned char **read_buff_ptr, struct buffinfo seg_buffs[]) + { + int i; + uint32 width, length, total_width, total_length; + tsize_t cropsize; + unsigned char *crop_buff = NULL; + unsigned char *read_buff = NULL; + unsigned char *next_buff = NULL; + tsize_t prev_cropsize = 0; + + read_buff = *read_buff_ptr; + + if (crop->img_mode == COMPOSITE_IMAGES) + { + cropsize = crop->bufftotal; + crop_buff = seg_buffs[0].buffer; + if (!crop_buff) + crop_buff = (unsigned char *)_TIFFmalloc(cropsize); + else + { + prev_cropsize = seg_buffs[0].size; + if (prev_cropsize < cropsize) + { + next_buff = _TIFFrealloc(crop_buff, cropsize); + if (! next_buff) + { + _TIFFfree (crop_buff); + crop_buff = (unsigned char *)_TIFFmalloc(cropsize); + } + else + crop_buff = next_buff; + } + } + + if (!crop_buff) + { + TIFFError("processCropSelections", "Unable to allocate/reallocate crop buffer"); + return (-1); + } + + _TIFFmemset(crop_buff, 0, cropsize); + seg_buffs[0].buffer = crop_buff; + seg_buffs[0].size = cropsize; + + /* Checks for matching width or length as required */ + if (extractCompositeRegions(image, crop, read_buff, crop_buff) != 0) + return (1); + + if (crop->crop_mode & CROP_INVERT) + { + switch (crop->photometric) + { + /* Just change the interpretation */ + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + image->photometric = crop->photometric; + break; + case INVERT_DATA_ONLY: + case INVERT_DATA_AND_TAG: + if (invertImage(image->photometric, image->spp, image->bps, + crop->combined_width, crop->combined_length, crop_buff)) + { + TIFFError("processCropSelections", + "Failed to invert colorspace for composite regions"); + return (-1); + } + if (crop->photometric == INVERT_DATA_AND_TAG) + { + switch (image->photometric) + { + case PHOTOMETRIC_MINISWHITE: + image->photometric = PHOTOMETRIC_MINISBLACK; + break; + case PHOTOMETRIC_MINISBLACK: + image->photometric = PHOTOMETRIC_MINISWHITE; + break; + default: + break; + } + } + break; + default: break; + } + } + + /* Mirror and Rotate will not work with multiple regions unless they are the same width */ + if (crop->crop_mode & CROP_MIRROR) + { + if (mirrorImage(image->spp, image->bps, crop->mirror, + crop->combined_width, crop->combined_length, crop_buff)) + { + TIFFError("processCropSelections", "Failed to mirror composite regions %s", + (crop->rotation == MIRROR_HORIZ) ? "horizontally" : "vertically"); + return (-1); + } + } + + if (crop->crop_mode & CROP_ROTATE) /* rotate should be last as it can reallocate the buffer */ + { + if (rotateImage(crop->rotation, image, &crop->combined_width, + &crop->combined_length, &crop_buff)) + { + TIFFError("processCropSelections", + "Failed to rotate composite regions by %d degrees", crop->rotation); + return (-1); + } + seg_buffs[0].buffer = crop_buff; + seg_buffs[0].size = (((crop->combined_width * image->bps + 7 ) / 8) + * image->spp) * crop->combined_length; + } + } + else /* Separated Images */ + { + total_width = total_length = 0; + for (i = 0; i < crop->selections; i++) + { + cropsize = crop->bufftotal; + crop_buff = seg_buffs[i].buffer; + if (!crop_buff) + crop_buff = (unsigned char *)_TIFFmalloc(cropsize); + else + { + prev_cropsize = seg_buffs[0].size; + if (prev_cropsize < cropsize) + { + next_buff = _TIFFrealloc(crop_buff, cropsize); + if (! next_buff) + { + _TIFFfree (crop_buff); + crop_buff = (unsigned char *)_TIFFmalloc(cropsize); + } + else + crop_buff = next_buff; + } + } + + if (!crop_buff) + { + TIFFError("processCropSelections", "Unable to allocate/reallocate crop buffer"); + return (-1); + } + + _TIFFmemset(crop_buff, 0, cropsize); + seg_buffs[i].buffer = crop_buff; + seg_buffs[i].size = cropsize; + + if (extractSeparateRegion(image, crop, read_buff, crop_buff, i)) + { + TIFFError("processCropSelections", "Unable to extract cropped region %d from image", i); + return (-1); + } + + width = crop->regionlist[i].width; + length = crop->regionlist[i].length; + + if (crop->crop_mode & CROP_INVERT) + { + switch (crop->photometric) + { + /* Just change the interpretation */ + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + image->photometric = crop->photometric; + break; + case INVERT_DATA_ONLY: + case INVERT_DATA_AND_TAG: + if (invertImage(image->photometric, image->spp, image->bps, + width, length, crop_buff)) + { + TIFFError("processCropSelections", + "Failed to invert colorspace for region"); + return (-1); + } + if (crop->photometric == INVERT_DATA_AND_TAG) + { + switch (image->photometric) + { + case PHOTOMETRIC_MINISWHITE: + image->photometric = PHOTOMETRIC_MINISBLACK; + break; + case PHOTOMETRIC_MINISBLACK: + image->photometric = PHOTOMETRIC_MINISWHITE; + break; + default: + break; + } + } + break; + default: break; + } + } + + if (crop->crop_mode & CROP_MIRROR) + { + if (mirrorImage(image->spp, image->bps, crop->mirror, + width, length, crop_buff)) + { + TIFFError("processCropSelections", "Failed to mirror crop region %s", + (crop->rotation == MIRROR_HORIZ) ? "horizontally" : "vertically"); + return (-1); + } + } + + if (crop->crop_mode & CROP_ROTATE) /* rotate should be last as it can reallocate the buffer */ + { + if (rotateImage(crop->rotation, image, &crop->regionlist[i].width, + &crop->regionlist[i].length, &crop_buff)) + { + TIFFError("processCropSelections", + "Failed to rotate crop region by %d degrees", crop->rotation); + return (-1); + } + total_width += crop->regionlist[i].width; + total_length += crop->regionlist[i].length; + crop->combined_width = total_width; + crop->combined_length = total_length; + seg_buffs[i].buffer = crop_buff; + seg_buffs[i].size = (((crop->regionlist[i].width * image->bps + 7 ) / 8) + * image->spp) * crop->regionlist[i].length; + } + } + } + return (0); + } /* end processCropSelections */ + +/* Copy the crop section of the data from the current image into a buffer + * and adjust the IFD values to reflect the new size. If no cropping is + * required, use the origial read buffer as the crop buffer. + * + * There is quite a bit of redundancy between this routine and the more + * specialized processCropSelections, but this provides + * the most optimized path when no Zones or Regions are required. + */ +static int +createCroppedImage(struct image_data *image, struct crop_mask *crop, + unsigned char **read_buff_ptr, unsigned char **crop_buff_ptr) + { + tsize_t cropsize; + unsigned char *read_buff = NULL; + unsigned char *crop_buff = NULL; + unsigned char *new_buff = NULL; + static tsize_t prev_cropsize = 0; + + read_buff = *read_buff_ptr; + + /* process full image, no crop buffer needed */ + crop_buff = read_buff; + *crop_buff_ptr = read_buff; + crop->combined_width = image->width; + crop->combined_length = image->length; + + cropsize = crop->bufftotal; + crop_buff = *crop_buff_ptr; + if (!crop_buff) + { + crop_buff = (unsigned char *)_TIFFmalloc(cropsize); + *crop_buff_ptr = crop_buff; + _TIFFmemset(crop_buff, 0, cropsize); + prev_cropsize = cropsize; + } + else + { + if (prev_cropsize < cropsize) + { + new_buff = _TIFFrealloc(crop_buff, cropsize); + if (!new_buff) + { + free (crop_buff); + crop_buff = (unsigned char *)_TIFFmalloc(cropsize); + } + else + crop_buff = new_buff; + _TIFFmemset(crop_buff, 0, cropsize); + } + } + + if (!crop_buff) + { + TIFFError("createCroppedImage", "Unable to allocate/reallocate crop buffer"); + return (-1); + } + *crop_buff_ptr = crop_buff; + + if (crop->crop_mode & CROP_INVERT) + { + switch (crop->photometric) + { + /* Just change the interpretation */ + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + image->photometric = crop->photometric; + break; + case INVERT_DATA_ONLY: + case INVERT_DATA_AND_TAG: + if (invertImage(image->photometric, image->spp, image->bps, + crop->combined_width, crop->combined_length, crop_buff)) + { + TIFFError("createCroppedImage", + "Failed to invert colorspace for image or cropped selection"); + return (-1); + } + if (crop->photometric == INVERT_DATA_AND_TAG) + { + switch (image->photometric) + { + case PHOTOMETRIC_MINISWHITE: + image->photometric = PHOTOMETRIC_MINISBLACK; + break; + case PHOTOMETRIC_MINISBLACK: + image->photometric = PHOTOMETRIC_MINISWHITE; + break; + default: + break; + } + } + break; + default: break; + } + } + + if (crop->crop_mode & CROP_MIRROR) + { + if (mirrorImage(image->spp, image->bps, crop->mirror, + crop->combined_width, crop->combined_length, crop_buff)) + { + TIFFError("createCroppedImage", "Failed to mirror image or cropped selection %s", + (crop->rotation == MIRROR_HORIZ) ? "horizontally" : "vertically"); + return (-1); + } + } + + if (crop->crop_mode & CROP_ROTATE) /* rotate should be last as it can reallocate the buffer */ + { + if (rotateImage(crop->rotation, image, &crop->combined_width, + &crop->combined_length, crop_buff_ptr)) + { + TIFFError("createCroppedImage", + "Failed to rotate image or cropped selection by %d degrees", crop->rotation); + return (-1); + } + } + + if (crop_buff == read_buff) /* we used the read buffer for the crop buffer */ + *read_buff_ptr = NULL; /* so we don't try to free it later */ + + return (0); + } /* end createCroppedImage */ + + +/* Code in this function is heavily indebted to code in tiffcp + * with modifications by Richard Nolde to handle orientation correctly. + * It will have to be updated significantly if support is added to + * extract one or more samples from original image since the + * original code assumes we are always copying all samples. + * Use of global variables for config, compression and others + * should be replaced by addition to the crop_mask struct (which + * will be renamed to proc_opts indicating that is controlls + * user supplied processing options, not just cropping) and + * then passed in as an argument. + */ +static int +writeCroppedImage(TIFF *in, TIFF *out, struct image_data *image, + struct dump_opts *dump, uint32 width, uint32 length, + unsigned char *crop_buff, int pagenum, int total_pages) + { + uint16 bps, spp; + uint16 input_compression, input_photometric; + uint16 input_planar; + struct cpTag* p; + + input_compression = image->compression; + input_photometric = image->photometric; + spp = image->spp; + bps = image->bps; + + TIFFSetField(out, TIFFTAG_IMAGEWIDTH, width); + TIFFSetField(out, TIFFTAG_IMAGELENGTH, length); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, bps); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, spp); + +#ifdef DEBUG2 + TIFFError("writeCroppedImage", "Input compression: %s", + (input_compression == COMPRESSION_OJPEG) ? "Old Jpeg" : + ((input_compression == COMPRESSION_JPEG) ? "New Jpeg" : "Non Jpeg")); +#endif + + if (compression != (uint16)-1) + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + else + { + if (input_compression == COMPRESSION_OJPEG) + { + compression = COMPRESSION_JPEG; + jpegcolormode = JPEGCOLORMODE_RAW; + TIFFSetField(out, TIFFTAG_COMPRESSION, COMPRESSION_JPEG); + } + else + CopyField(TIFFTAG_COMPRESSION, compression); + } + + if (compression == COMPRESSION_JPEG) + { + if ((input_photometric == PHOTOMETRIC_PALETTE) || /* color map indexed */ + (input_photometric == PHOTOMETRIC_MASK)) /* $holdout mask */ + { + TIFFError ("writeCroppedImage", + "JPEG compression cannot be used with %s image data", + (input_photometric == PHOTOMETRIC_PALETTE) ? + "palette" : "mask"); + return (-1); + } + if ((input_photometric == PHOTOMETRIC_RGB) && + (jpegcolormode == JPEGCOLORMODE_RGB)) + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_YCBCR); + else + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, input_photometric); + } + else + { + if (compression == COMPRESSION_SGILOG || compression == COMPRESSION_SGILOG24) + { + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, spp == 1 ? + PHOTOMETRIC_LOGL : PHOTOMETRIC_LOGLUV); + } + else + { + if (input_compression == COMPRESSION_SGILOG || + input_compression == COMPRESSION_SGILOG24) + { + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, spp == 1 ? + PHOTOMETRIC_LOGL : PHOTOMETRIC_LOGLUV); + } + else + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, image->photometric); + } + } + + if (((input_photometric == PHOTOMETRIC_LOGL) || + (input_photometric == PHOTOMETRIC_LOGLUV)) && + ((compression != COMPRESSION_SGILOG) && + (compression != COMPRESSION_SGILOG24))) + { + TIFFError("writeCroppedImage", + "LogL and LogLuv source data require SGI_LOG or SGI_LOG24 compression"); + return (-1); + } + + if (fillorder != 0) + TIFFSetField(out, TIFFTAG_FILLORDER, fillorder); + else + CopyTag(TIFFTAG_FILLORDER, 1, TIFF_SHORT); + + /* The loadimage function reads input orientation and sets + * image->orientation. The correct_image_orientation function + * applies the required rotation and mirror operations to + * present the data in TOPLEFT orientation and updates + * image->orientation if any transforms are performed, + * as per EXIF standard. + */ + TIFFSetField(out, TIFFTAG_ORIENTATION, image->orientation); + + /* + * Choose tiles/strip for the output image according to + * the command line arguments (-tiles, -strips) and the + * structure of the input image. + */ + if (outtiled == -1) + outtiled = TIFFIsTiled(in); + if (outtiled) { + /* + * Setup output file's tile width&height. If either + * is not specified, use either the value from the + * input image or, if nothing is defined, use the + * library default. + */ + if (tilewidth == (uint32) 0) + TIFFGetField(in, TIFFTAG_TILEWIDTH, &tilewidth); + if (tilelength == (uint32) 0) + TIFFGetField(in, TIFFTAG_TILELENGTH, &tilelength); + + if (tilewidth == 0 || tilelength == 0) + TIFFDefaultTileSize(out, &tilewidth, &tilelength); + TIFFSetField(out, TIFFTAG_TILEWIDTH, tilewidth); + TIFFSetField(out, TIFFTAG_TILELENGTH, tilelength); + } else { + /* + * RowsPerStrip is left unspecified: use either the + * value from the input image or, if nothing is defined, + * use the library default. + */ + if (rowsperstrip == (uint32) 0) + { + if (!TIFFGetField(in, TIFFTAG_ROWSPERSTRIP, &rowsperstrip)) + rowsperstrip = TIFFDefaultStripSize(out, rowsperstrip); + if (compression != COMPRESSION_JPEG) + { + if (rowsperstrip > length) + rowsperstrip = length; + } + } + else + if (rowsperstrip == (uint32) -1) + rowsperstrip = length; + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, rowsperstrip); + } + + TIFFGetFieldDefaulted(in, TIFFTAG_PLANARCONFIG, &input_planar); + if (config != (uint16) -1) + TIFFSetField(out, TIFFTAG_PLANARCONFIG, config); + else + CopyField(TIFFTAG_PLANARCONFIG, config); + if (spp <= 4) + CopyTag(TIFFTAG_TRANSFERFUNCTION, 4, TIFF_SHORT); + CopyTag(TIFFTAG_COLORMAP, 4, TIFF_SHORT); + +/* SMinSampleValue & SMaxSampleValue */ + switch (compression) { + case COMPRESSION_JPEG: + if (((bps % 8) == 0) || ((bps % 12) == 0)) + { + TIFFSetField(out, TIFFTAG_JPEGQUALITY, quality); + TIFFSetField(out, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RGB); + } + else + { + TIFFError("writeCroppedImage", + "JPEG compression requires 8 or 12 bits per sample"); + return (-1); + } + break; + case COMPRESSION_LZW: + case COMPRESSION_ADOBE_DEFLATE: + case COMPRESSION_DEFLATE: + if (predictor != (uint16)-1) + TIFFSetField(out, TIFFTAG_PREDICTOR, predictor); + else + CopyField(TIFFTAG_PREDICTOR, predictor); + break; + case COMPRESSION_CCITTFAX3: + case COMPRESSION_CCITTFAX4: + if (bps != 1) + { + TIFFError("writeCroppedImage", + "Group 3/4 compression is not usable with bps > 1"); + return (-1); + } + if (compression == COMPRESSION_CCITTFAX3) { + if (g3opts != (uint32) -1) + TIFFSetField(out, TIFFTAG_GROUP3OPTIONS, g3opts); + else + CopyField(TIFFTAG_GROUP3OPTIONS, g3opts); + } else + CopyTag(TIFFTAG_GROUP4OPTIONS, 1, TIFF_LONG); + CopyTag(TIFFTAG_BADFAXLINES, 1, TIFF_LONG); + CopyTag(TIFFTAG_CLEANFAXDATA, 1, TIFF_LONG); + CopyTag(TIFFTAG_CONSECUTIVEBADFAXLINES, 1, TIFF_LONG); + CopyTag(TIFFTAG_FAXRECVPARAMS, 1, TIFF_LONG); + CopyTag(TIFFTAG_FAXRECVTIME, 1, TIFF_LONG); + CopyTag(TIFFTAG_FAXSUBADDRESS, 1, TIFF_ASCII); + break; + case COMPRESSION_NONE: + break; + default: break; + } + { uint32 len32; + void** data; + if (TIFFGetField(in, TIFFTAG_ICCPROFILE, &len32, &data)) + TIFFSetField(out, TIFFTAG_ICCPROFILE, len32, data); + } + { uint16 ninks; + const char* inknames; + if (TIFFGetField(in, TIFFTAG_NUMBEROFINKS, &ninks)) { + TIFFSetField(out, TIFFTAG_NUMBEROFINKS, ninks); + if (TIFFGetField(in, TIFFTAG_INKNAMES, &inknames)) { + int inknameslen = strlen(inknames) + 1; + const char* cp = inknames; + while (ninks > 1) { + cp = strchr(cp, '\0'); + if (cp) { + cp++; + inknameslen += (strlen(cp) + 1); + } + ninks--; + } + TIFFSetField(out, TIFFTAG_INKNAMES, inknameslen, inknames); + } + } + } + { + unsigned short pg0, pg1; + if (TIFFGetField(in, TIFFTAG_PAGENUMBER, &pg0, &pg1)) { + TIFFSetField(out, TIFFTAG_PAGENUMBER, pagenum, total_pages); + } + } + + for (p = tags; p < &tags[NTAGS]; p++) + CopyTag(p->tag, p->count, p->type); + + /* Compute the tile or strip dimensions and write to disk */ + if (outtiled) + { + if (config == PLANARCONFIG_CONTIG) + { + if (writeBufferToContigTiles (out, crop_buff, length, width, spp, dump)) + TIFFError("","Unable to write contiguous tile data for page %d", pagenum); + } + else + { + if (writeBufferToSeparateTiles (out, crop_buff, length, width, spp, dump)) + TIFFError("","Unable to write separate tile data for page %d", pagenum); + } + } + else + { + if (config == PLANARCONFIG_CONTIG) + { + if (writeBufferToContigStrips (out, crop_buff, length)) + TIFFError("","Unable to write contiguous strip data for page %d", pagenum); + } + else + { + if (writeBufferToSeparateStrips(out, crop_buff, length, width, spp, dump)) + TIFFError("","Unable to write separate strip data for page %d", pagenum); + } + } + + if (!TIFFWriteDirectory(out)) + { + TIFFError("","Failed to write IFD for page number %d", pagenum); + TIFFClose(out); + return (-1); + } + + return (0); + } /* end writeCroppedImage */ + +static int +rotateContigSamples8bits(uint16 rotation, uint16 spp, uint16 bps, uint32 width, + uint32 length, uint32 col, uint8 *src, uint8 *dst) + { + int ready_bits = 0; + uint32 src_byte = 0, src_bit = 0; + uint32 row, rowsize = 0, bit_offset = 0; + uint8 matchbits = 0, maskbits = 0; + uint8 buff1 = 0, buff2 = 0; + uint8 *next; + tsample_t sample; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("rotateContigSamples8bits","Invalid src or destination buffer"); + return (1); + } + + rowsize = ((bps * spp * width) + 7) / 8; + ready_bits = 0; + maskbits = (uint8)-1 >> ( 8 - bps); + buff1 = buff2 = 0; + + for (row = 0; row < length ; row++) + { + bit_offset = col * bps * spp; + for (sample = 0; sample < spp; sample++) + { + if (sample == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sample * bps)) / 8; + src_bit = (bit_offset + (sample * bps)) % 8; + } + + switch (rotation) + { + case 90: next = src + src_byte - (row * rowsize); + break; + case 270: next = src + src_byte + (row * rowsize); + break; + default: TIFFError("rotateContigSamples8bits", "Invalid rotation %d", rotation); + return (1); + } + matchbits = maskbits << (8 - src_bit - bps); + buff1 = ((*next) & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 8) + { + *dst++ = buff2; + buff2 = buff1; + ready_bits -= 8; + } + else + { + buff2 = (buff2 | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + + if (ready_bits > 0) + { + buff1 = (buff2 & ((unsigned int)255 << (8 - ready_bits))); + *dst++ = buff1; + } + + return (0); + } /* end rotateContigSamples8bits */ + + +static int +rotateContigSamples16bits(uint16 rotation, uint16 spp, uint16 bps, uint32 width, + uint32 length, uint32 col, uint8 *src, uint8 *dst) + { + int ready_bits = 0; + uint32 row, rowsize, bit_offset; + uint32 src_byte = 0, src_bit = 0; + uint16 matchbits = 0, maskbits = 0; + uint16 buff1 = 0, buff2 = 0; + uint8 bytebuff = 0; + uint8 *next; + tsample_t sample; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("rotateContigSamples16bits","Invalid src or destination buffer"); + return (1); + } + + rowsize = ((bps * spp * width) + 7) / 8; + ready_bits = 0; + maskbits = (uint16)-1 >> (16 - bps); + buff1 = buff2 = 0; + for (row = 0; row < length; row++) + { + bit_offset = col * bps * spp; + for (sample = 0; sample < spp; sample++) + { + if (sample == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sample * bps)) / 8; + src_bit = (bit_offset + (sample * bps)) % 8; + } + + switch (rotation) + { + case 90: next = src + src_byte - (row * rowsize); + break; + case 270: next = src + src_byte + (row * rowsize); + break; + default: TIFFError("rotateContigSamples8bits", "Invalid rotation %d", rotation); + return (1); + } + matchbits = maskbits << (16 - src_bit - bps); + if (little_endian) + buff1 = (next[0] << 8) | next[1]; + else + buff1 = (next[1] << 8) | next[0]; + + buff1 = (buff1 & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 8) + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + ready_bits -= 8; + /* shift in new bits */ + buff2 = ((buff2 << 8) | (buff1 >> ready_bits)); + } + else + { /* add another bps bits to the buffer */ + bytebuff = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + + if (ready_bits > 0) + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + } + + return (0); + } /* end rotateContigSamples16bits */ + +static int +rotateContigSamples24bits(uint16 rotation, uint16 spp, uint16 bps, uint32 width, + uint32 length, uint32 col, uint8 *src, uint8 *dst) + { + int ready_bits = 0; + uint32 row, rowsize, bit_offset; + uint32 src_byte = 0, src_bit = 0; + uint32 matchbits = 0, maskbits = 0; + uint32 buff1 = 0, buff2 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0; + uint8 *next; + tsample_t sample; + + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("rotateContigSamples24bits","Invalid src or destination buffer"); + return (1); + } + + rowsize = ((bps * spp * width) + 7) / 8; + ready_bits = 0; + maskbits = (uint32)-1 >> (32 - bps); + buff1 = buff2 = 0; + for (row = 0; row < length; row++) + { + bit_offset = col * bps * spp; + for (sample = 0; sample < spp; sample++) + { + if (sample == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sample * bps)) / 8; + src_bit = (bit_offset + (sample * bps)) % 8; + } + + switch (rotation) + { + case 90: next = src + src_byte - (row * rowsize); + break; + case 270: next = src + src_byte + (row * rowsize); + break; + default: TIFFError("rotateContigSamples8bits", "Invalid rotation %d", rotation); + return (1); + } + matchbits = maskbits << (32 - src_bit - bps); + if (little_endian) + buff1 = (next[0] << 24) | (next[1] << 16) | (next[2] << 8) | next[3]; + else + buff1 = (next[3] << 24) | (next[2] << 16) | (next[1] << 8) | next[0]; + buff1 = (buff1 & matchbits) << (src_bit); + + /* If we have a full buffer's worth, write it out */ + if (ready_bits >= 16) + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 16); + *dst++ = bytebuff2; + ready_bits -= 16; + + /* shift in new bits */ + buff2 = ((buff2 << 16) | (buff1 >> ready_bits)); + } + else + { /* add another bps bits to the buffer */ + bytebuff1 = bytebuff2 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + + /* catch any trailing bits at the end of the line */ + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + + buff2 = (buff2 << 8); + bytebuff2 = bytebuff1; + ready_bits -= 8; + } + + return (0); + } /* end rotateContigSamples24bits */ + +static int +rotateContigSamples32bits(uint16 rotation, uint16 spp, uint16 bps, uint32 width, + uint32 length, uint32 col, uint8 *src, uint8 *dst) + { + int ready_bits = 0, shift_width = 0; + int bytes_per_sample, bytes_per_pixel; + uint32 row, rowsize, bit_offset; + uint32 src_byte, src_bit; + uint32 longbuff1 = 0, longbuff2 = 0; + uint64 maskbits = 0, matchbits = 0; + uint64 buff1 = 0, buff2 = 0, buff3 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0, bytebuff3 = 0, bytebuff4 = 0; + uint8 *next; + tsample_t sample; + + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("rotateContigSamples24bits","Invalid src or destination buffer"); + return (1); + } + + bytes_per_sample = (bps + 7) / 8; + bytes_per_pixel = ((bps * spp) + 7) / 8; + if (bytes_per_pixel < (bytes_per_sample + 1)) + shift_width = bytes_per_pixel; + else + shift_width = bytes_per_sample + 1; + + rowsize = ((bps * spp * width) + 7) / 8; + ready_bits = 0; + maskbits = (uint64)-1 >> (64 - bps); + buff1 = buff2 = 0; + for (row = 0; row < length; row++) + { + bit_offset = col * bps * spp; + for (sample = 0; sample < spp; sample++) + { + if (sample == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sample * bps)) / 8; + src_bit = (bit_offset + (sample * bps)) % 8; + } + + switch (rotation) + { + case 90: next = src + src_byte - (row * rowsize); + break; + case 270: next = src + src_byte + (row * rowsize); + break; + default: TIFFError("rotateContigSamples8bits", "Invalid rotation %d", rotation); + return (1); + } + matchbits = maskbits << (64 - src_bit - bps); + if (little_endian) + { + longbuff1 = (next[0] << 24) | (next[1] << 16) | (next[2] << 8) | next[3]; + longbuff2 = longbuff1; + } + else + { + longbuff1 = (next[3] << 24) | (next[2] << 16) | (next[1] << 8) | next[0]; + longbuff2 = longbuff1; + } + + buff3 = ((uint64)longbuff1 << 32) | longbuff2; + buff1 = (buff3 & matchbits) << (src_bit); + + if (ready_bits < 32) + { /* add another bps bits to the buffer */ + bytebuff1 = bytebuff2 = bytebuff3 = bytebuff4 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + } + else /* If we have a full buffer's worth, write it out */ + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 48); + *dst++ = bytebuff2; + bytebuff3 = (buff2 >> 40); + *dst++ = bytebuff3; + bytebuff4 = (buff2 >> 32); + *dst++ = bytebuff4; + ready_bits -= 32; + + /* shift in new bits */ + buff2 = ((buff2 << 32) | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + buff2 = (buff2 << 8); + ready_bits -= 8; + } + + return (0); + } /* end rotateContigSamples32bits */ + + +/* Rotate an image by a multiple of 90 degrees clockwise */ +static int +rotateImage(uint16 rotation, struct image_data *image, uint32 *img_width, + uint32 *img_length, unsigned char **ibuff_ptr) + { + int shift_width; + uint32 bytes_per_pixel, bytes_per_sample; + uint32 row, rowsize, src_offset, dst_offset; + uint32 i, col, width, length; + uint32 colsize, buffsize, col_offset, pix_offset; + unsigned char *ibuff; + unsigned char *src; + unsigned char *dst; + uint16 spp, bps; + float res_temp; + unsigned char *rbuff = NULL; + + width = *img_width; + length = *img_length; + spp = image->spp; + bps = image->bps; + + rowsize = ((bps * spp * width) + 7) / 8; + colsize = ((bps * spp * length) + 7) / 8; + if ((colsize * width) > (rowsize * length)) + buffsize = (colsize + 1) * width; + else + buffsize = (rowsize + 1) * length; + + bytes_per_sample = (bps + 7) / 8; + bytes_per_pixel = ((bps * spp) + 7) / 8; + if (bytes_per_pixel < (bytes_per_sample + 1)) + shift_width = bytes_per_pixel; + else + shift_width = bytes_per_sample + 1; + + switch (rotation) + { + case 0: + case 360: return (0); + case 90: + case 180: + case 270: break; + default: TIFFError("rotateImage", "Invalid rotation angle %d", rotation); + return (-1); + } + + if (!(rbuff = (unsigned char *)_TIFFmalloc(buffsize))) + { + TIFFError("rotateImage", "Unable to allocate rotation buffer of %1u bytes", buffsize); + return (-1); + } + _TIFFmemset(rbuff, '\0', buffsize); + + ibuff = *ibuff_ptr; + switch (rotation) + { + case 180: if ((bps % 8) == 0) /* byte alligned data */ + { + src = ibuff; + pix_offset = (spp * bps) / 8; + for (row = 0; row < length; row++) + { + dst_offset = (length - row - 1) * rowsize; + for (col = 0; col < width; col++) + { + col_offset = (width - col - 1) * pix_offset; + dst = rbuff + dst_offset + col_offset; + + for (i = 0; i < bytes_per_pixel; i++) + *dst++ = *src++; + } + } + } + else + { /* non 8 bit per sample data */ + for (row = 0; row < length; row++) + { + src_offset = row * rowsize; + dst_offset = (length - row - 1) * rowsize; + src = ibuff + src_offset; + dst = rbuff + dst_offset; + switch (shift_width) + { + case 1: if (bps == 1) + { + if (reverseSamples8bits(spp, bps, width, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + } + if (reverseSamples16bits(spp, bps, width, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + case 2: if (reverseSamples24bits(spp, bps, width, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + case 3: + case 4: + case 5: if (reverseSamples32bits(spp, bps, width, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + default: TIFFError("rotateImage","Unsupported bit depth %d", bps); + _TIFFfree(rbuff); + return (-1); + } + } + } + _TIFFfree(ibuff); + *(ibuff_ptr) = rbuff; + break; + + case 90: if ((bps % 8) == 0) /* byte aligned data */ + { + for (col = 0; col < width; col++) + { + src_offset = ((length - 1) * rowsize) + (col * bytes_per_pixel); + dst_offset = col * colsize; + src = ibuff + src_offset; + dst = rbuff + dst_offset; + for (row = length; row > 0; row--) + { + for (i = 0; i < bytes_per_pixel; i++) + *dst++ = *(src + i); + src -= rowsize; + } + } + } + else + { /* non 8 bit per sample data */ + for (col = 0; col < width; col++) + { + src_offset = (length - 1) * rowsize; + dst_offset = col * colsize; + src = ibuff + src_offset; + dst = rbuff + dst_offset; + switch (shift_width) + { + case 1: if (bps == 1) + { + if (rotateContigSamples8bits(rotation, spp, bps, width, + length, col, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + } + if (rotateContigSamples16bits(rotation, spp, bps, width, + length, col, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + case 2: if (rotateContigSamples24bits(rotation, spp, bps, width, + length, col, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + case 3: + case 4: + case 5: if (rotateContigSamples32bits(rotation, spp, bps, width, + length, col, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + default: TIFFError("rotateImage","Unsupported bit depth %d", bps); + _TIFFfree(rbuff); + return (-1); + } + } + } + _TIFFfree(ibuff); + *(ibuff_ptr) = rbuff; + + *img_width = length; + *img_length = width; + image->width = length; + image->length = width; + res_temp = image->xres; + image->xres = image->yres; + image->yres = res_temp; + break; + + case 270: if ((bps % 8) == 0) /* byte aligned data */ + { + for (col = 0; col < width; col++) + { + src_offset = col * bytes_per_pixel; + dst_offset = (width - col - 1) * colsize; + src = ibuff + src_offset; + dst = rbuff + dst_offset; + for (row = length; row > 0; row--) + { + for (i = 0; i < bytes_per_pixel; i++) + *dst++ = *(src + i); + src += rowsize; + } + } + } + else + { /* non 8 bit per sample data */ + for (col = 0; col < width; col++) + { + src_offset = 0; + dst_offset = (width - col - 1) * colsize; + src = ibuff + src_offset; + dst = rbuff + dst_offset; + switch (shift_width) + { + case 1: if (bps == 1) + { + if (rotateContigSamples8bits(rotation, spp, bps, width, + length, col, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + } + if (rotateContigSamples16bits(rotation, spp, bps, width, + length, col, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + case 2: if (rotateContigSamples24bits(rotation, spp, bps, width, + length, col, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + case 3: + case 4: + case 5: if (rotateContigSamples32bits(rotation, spp, bps, width, + length, col, src, dst)) + { + _TIFFfree(rbuff); + return (-1); + } + break; + default: TIFFError("rotateImage","Unsupported bit depth %d", bps); + _TIFFfree(rbuff); + return (-1); + } + } + } + _TIFFfree(ibuff); + *(ibuff_ptr) = rbuff; + + *img_width = length; + *img_length = width; + image->width = length; + image->length = width; + res_temp = image->xres; + image->xres = image->yres; + image->yres = res_temp; + break; + default: + break; + } + + return (0); + } /* end rotateImage */ + +static int +reverseSamples8bits (uint16 spp, uint16 bps, uint32 width, + uint8 *ibuff, uint8 *obuff) + { + int ready_bits = 0; + uint32 col; + uint32 src_byte, src_bit; + uint32 bit_offset = 0; + uint8 match_bits = 0, mask_bits = 0; + uint8 buff1 = 0, buff2 = 0; + unsigned char *src; + unsigned char *dst; + tsample_t sample; + + if ((ibuff == NULL) || (obuff == NULL)) + { + TIFFError("reverseSamples8bits","Invalid image or work buffer"); + return (1); + } + + ready_bits = 0; + mask_bits = (uint8)-1 >> ( 8 - bps); + dst = obuff; + for (col = width; col > 0; col--) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = (col - 1) * bps * spp; + for (sample = 0; sample < spp; sample++) + { + if (sample == 0) + { + src_byte = bit_offset / 8; + src_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sample * bps)) / 8; + src_bit = (bit_offset + (sample * bps)) % 8; + } + + src = ibuff + src_byte; + match_bits = mask_bits << (8 - src_bit - bps); + buff1 = ((*src) & match_bits) << (src_bit); + + if (ready_bits < 8) + buff2 = (buff2 | (buff1 >> ready_bits)); + else /* If we have a full buffer's worth, write it out */ + { + *dst++ = buff2; + buff2 = buff1; + ready_bits -= 8; + } + ready_bits += bps; + } + } + if (ready_bits > 0) + { + buff1 = (buff2 & ((unsigned int)255 << (8 - ready_bits))); + *dst++ = buff1; + } + + return (0); + } /* end reverseSamples8bits */ + + +static int +reverseSamples16bits (uint16 spp, uint16 bps, uint32 width, + uint8 *ibuff, uint8 *obuff) + { + int ready_bits = 0; + uint32 col; + uint32 src_byte = 0, high_bit = 0; + uint32 bit_offset = 0; + uint16 match_bits = 0, mask_bits = 0; + uint16 buff1 = 0, buff2 = 0; + uint8 bytebuff = 0; + unsigned char *src; + unsigned char *dst; + tsample_t sample; + + if ((ibuff == NULL) || (obuff == NULL)) + { + TIFFError("reverseSample16bits","Invalid image or work buffer"); + return (1); + } + + ready_bits = 0; + mask_bits = (uint16)-1 >> (16 - bps); + dst = obuff; + for (col = width; col > 0; col--) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = (col - 1) * bps * spp; + for (sample = 0; sample < spp; sample++) + { + if (sample == 0) + { + src_byte = bit_offset / 8; + high_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sample * bps)) / 8; + high_bit = (bit_offset + (sample * bps)) % 8; + } + + src = ibuff + src_byte; + match_bits = mask_bits << (16 - high_bit - bps); + if (little_endian) + buff1 = (src[0] << 8) | src[1]; + else + buff1 = (src[1] << 8) | src[0]; + buff1 = (buff1 & match_bits) << (high_bit); + + if (ready_bits < 8) + { /* add another bps bits to the buffer */ + bytebuff = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + } + else /* If we have a full buffer's worth, write it out */ + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + ready_bits -= 8; + /* shift in new bits */ + buff2 = ((buff2 << 8) | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + + if (ready_bits > 0) + { + bytebuff = (buff2 >> 8); + *dst++ = bytebuff; + } + + return (0); + } /* end reverseSamples16bits */ + +static int +reverseSamples24bits (uint16 spp, uint16 bps, uint32 width, + uint8 *ibuff, uint8 *obuff) + { + int ready_bits = 0; + uint32 col; + uint32 src_byte = 0, high_bit = 0; + uint32 bit_offset = 0; + uint32 match_bits = 0, mask_bits = 0; + uint32 buff1 = 0, buff2 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0; + unsigned char *src; + unsigned char *dst; + tsample_t sample; + + if ((ibuff == NULL) || (obuff == NULL)) + { + TIFFError("reverseSamples24bits","Invalid image or work buffer"); + return (1); + } + + ready_bits = 0; + mask_bits = (uint32)-1 >> (32 - bps); + dst = obuff; + for (col = width; col > 0; col--) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = (col - 1) * bps * spp; + for (sample = 0; sample < spp; sample++) + { + if (sample == 0) + { + src_byte = bit_offset / 8; + high_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sample * bps)) / 8; + high_bit = (bit_offset + (sample * bps)) % 8; + } + + src = ibuff + src_byte; + match_bits = mask_bits << (32 - high_bit - bps); + if (little_endian) + buff1 = (src[0] << 24) | (src[1] << 16) | (src[2] << 8) | src[3]; + else + buff1 = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0]; + buff1 = (buff1 & match_bits) << (high_bit); + + if (ready_bits < 16) + { /* add another bps bits to the buffer */ + bytebuff1 = bytebuff2 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + } + else /* If we have a full buffer's worth, write it out */ + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 16); + *dst++ = bytebuff2; + ready_bits -= 16; + + /* shift in new bits */ + buff2 = ((buff2 << 16) | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + + /* catch any trailing bits at the end of the line */ + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 24); + *dst++ = bytebuff1; + + buff2 = (buff2 << 8); + bytebuff2 = bytebuff1; + ready_bits -= 8; + } + + return (0); + } /* end reverseSamples24bits */ + + +static int +reverseSamples32bits (uint16 spp, uint16 bps, uint32 width, + uint8 *ibuff, uint8 *obuff) + { + int ready_bits = 0, shift_width = 0; + int bytes_per_sample, bytes_per_pixel; + uint32 bit_offset; + uint32 src_byte = 0, high_bit = 0; + uint32 col; + uint32 longbuff1 = 0, longbuff2 = 0; + uint64 mask_bits = 0, match_bits = 0; + uint64 buff1 = 0, buff2 = 0, buff3 = 0; + uint8 bytebuff1 = 0, bytebuff2 = 0, bytebuff3 = 0, bytebuff4 = 0; + unsigned char *src; + unsigned char *dst; + tsample_t sample; + + if ((ibuff == NULL) || (obuff == NULL)) + { + TIFFError("reverseSamples32bits","Invalid image or work buffer"); + return (1); + } + + ready_bits = 0; + mask_bits = (uint64)-1 >> (64 - bps); + dst = obuff; + + bytes_per_sample = (bps + 7) / 8; + bytes_per_pixel = ((bps * spp) + 7) / 8; + if (bytes_per_pixel < (bytes_per_sample + 1)) + shift_width = bytes_per_pixel; + else + shift_width = bytes_per_sample + 1; + + for (col = width; col > 0; col--) + { + /* Compute src byte(s) and bits within byte(s) */ + bit_offset = (col - 1) * bps * spp; + for (sample = 0; sample < spp; sample++) + { + if (sample == 0) + { + src_byte = bit_offset / 8; + high_bit = bit_offset % 8; + } + else + { + src_byte = (bit_offset + (sample * bps)) / 8; + high_bit = (bit_offset + (sample * bps)) % 8; + } + + src = ibuff + src_byte; + match_bits = mask_bits << (64 - high_bit - bps); + if (little_endian) + { + longbuff1 = (src[0] << 24) | (src[1] << 16) | (src[2] << 8) | src[3]; + longbuff2 = longbuff1; + } + else + { + longbuff1 = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0]; + longbuff2 = longbuff1; + } + buff3 = ((uint64)longbuff1 << 32) | longbuff2; + buff1 = (buff3 & match_bits) << (high_bit); + + if (ready_bits < 32) + { /* add another bps bits to the buffer */ + bytebuff1 = bytebuff2 = bytebuff3 = bytebuff4 = 0; + buff2 = (buff2 | (buff1 >> ready_bits)); + } + else /* If we have a full buffer's worth, write it out */ + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + bytebuff2 = (buff2 >> 48); + *dst++ = bytebuff2; + bytebuff3 = (buff2 >> 40); + *dst++ = bytebuff3; + bytebuff4 = (buff2 >> 32); + *dst++ = bytebuff4; + ready_bits -= 32; + + /* shift in new bits */ + buff2 = ((buff2 << 32) | (buff1 >> ready_bits)); + } + ready_bits += bps; + } + } + while (ready_bits > 0) + { + bytebuff1 = (buff2 >> 56); + *dst++ = bytebuff1; + buff2 = (buff2 << 8); + ready_bits -= 8; + } + + return (0); + } /* end reverseSamples32bits */ + +static int +reverseSamplesBytes (uint16 spp, uint16 bps, uint32 width, + uint8 *src, uint8 *dst) + { + int i; + uint32 col, bytes_per_pixel, col_offset; + uint8 bytebuff1; + unsigned char swapbuff[32]; + + if ((src == NULL) || (dst == NULL)) + { + TIFFError("reverseSamplesBytes","Invalid input or output buffer"); + return (1); + } + + bytes_per_pixel = ((bps * spp) + 7) / 8; + switch (bps / 8) + { + case 8: /* Use memcpy for multiple bytes per sample data */ + case 4: + case 3: + case 2: for (col = 0; col < (width / 2); col++) + { + col_offset = col * bytes_per_pixel; + _TIFFmemcpy (swapbuff, src + col_offset, bytes_per_pixel); + _TIFFmemcpy (src + col_offset, dst - col_offset - bytes_per_pixel, bytes_per_pixel); + _TIFFmemcpy (dst - col_offset - bytes_per_pixel, swapbuff, bytes_per_pixel); + } + break; + case 1: /* Use byte copy only for single byte per sample data */ + for (col = 0; col < (width / 2); col++) + { + for (i = 0; i < spp; i++) + { + bytebuff1 = *src; + *src++ = *(dst - spp + i); + *(dst - spp + i) = bytebuff1; + } + dst -= spp; + } + break; + default: TIFFError("reverseSamplesBytes","Unsupported bit depth %d", bps); + return (1); + } + return (0); + } /* end reverseSamplesBytes */ + + +/* Mirror an image horizontally or vertically */ +static int +mirrorImage(uint16 spp, uint16 bps, uint16 mirror, uint32 width, uint32 length, unsigned char *ibuff) + { + int shift_width; + uint32 bytes_per_pixel, bytes_per_sample; + uint32 row, rowsize, row_offset; + unsigned char *line_buff = NULL; + unsigned char *src; + unsigned char *dst; + + src = ibuff; + rowsize = ((width * bps * spp) + 7) / 8; + switch (mirror) + { + case MIRROR_BOTH: + case MIRROR_VERT: + line_buff = (unsigned char *)_TIFFmalloc(rowsize); + if (line_buff == NULL) + { + TIFFError ("mirrorImage", "Unable to allocate mirror line buffer of %1u bytes", rowsize); + return (-1); + } + + dst = ibuff + (rowsize * (length - 1)); + for (row = 0; row < length / 2; row++) + { + _TIFFmemcpy(line_buff, src, rowsize); + _TIFFmemcpy(src, dst, rowsize); + _TIFFmemcpy(dst, line_buff, rowsize); + src += (rowsize); + dst -= (rowsize); + } + if (line_buff) + _TIFFfree(line_buff); + if (mirror == MIRROR_VERT) + break; + case MIRROR_HORIZ : + if ((bps % 8) == 0) /* byte alligned data */ + { + for (row = 0; row < length; row++) + { + row_offset = row * rowsize; + src = ibuff + row_offset; + dst = ibuff + row_offset + rowsize; + if (reverseSamplesBytes(spp, bps, width, src, dst)) + { + return (-1); + } + } + } + else + { /* non 8 bit per sample data */ + if (!(line_buff = (unsigned char *)_TIFFmalloc(rowsize + 1))) + { + TIFFError("mirrorImage", "Unable to allocate mirror line buffer"); + return (-1); + } + bytes_per_sample = (bps + 7) / 8; + bytes_per_pixel = ((bps * spp) + 7) / 8; + if (bytes_per_pixel < (bytes_per_sample + 1)) + shift_width = bytes_per_pixel; + else + shift_width = bytes_per_sample + 1; + + for (row = 0; row < length; row++) + { + row_offset = row * rowsize; + src = ibuff + row_offset; + _TIFFmemset (line_buff, '\0', rowsize); + switch (shift_width) + { + case 1: if (reverseSamples16bits(spp, bps, width, src, line_buff)) + { + _TIFFfree(line_buff); + return (-1); + } + _TIFFmemcpy (src, line_buff, rowsize); + break; + case 2: if (reverseSamples24bits(spp, bps, width, src, line_buff)) + { + _TIFFfree(line_buff); + return (-1); + } + _TIFFmemcpy (src, line_buff, rowsize); + break; + case 3: + case 4: + case 5: if (reverseSamples32bits(spp, bps, width, src, line_buff)) + { + _TIFFfree(line_buff); + return (-1); + } + _TIFFmemcpy (src, line_buff, rowsize); + break; + default: TIFFError("mirrorImage","Unsupported bit depth %d", bps); + _TIFFfree(line_buff); + return (-1); + } + } + if (line_buff) + _TIFFfree(line_buff); + } + break; + + default: TIFFError ("mirrorImage", "Invalid mirror axis %d", mirror); + return (-1); + break; + } + + return (0); + } + +/* Invert the light and dark values for a bilevel or grayscale image */ +static int +invertImage(uint16 photometric, uint16 spp, uint16 bps, uint32 width, uint32 length, unsigned char *work_buff) + { + uint32 row, col; + unsigned char bytebuff1, bytebuff2, bytebuff3, bytebuff4; + unsigned char *src; + uint16 *src_uint16; + uint32 *src_uint32; + + if (spp != 1) + { + TIFFError("invertImage", "Image inversion not supported for more than one sample per pixel"); + return (-1); + } + + if (photometric != PHOTOMETRIC_MINISWHITE && photometric != PHOTOMETRIC_MINISBLACK) + { + TIFFError("invertImage", "Only black and white and grayscale images can be inverted"); + return (-1); + } + + src = work_buff; + if (src == NULL) + { + TIFFError ("invertImage", "Invalid crop buffer passed to invertImage"); + return (-1); + } + + switch (bps) + { + case 32: src_uint32 = (uint32 *)src; + for (row = 0; row < length; row++) + for (col = 0; col < width; col++) + { + *src_uint32 = (uint32)0xFFFFFFFF - *src_uint32; + src_uint32++; + } + break; + case 16: src_uint16 = (uint16 *)src; + for (row = 0; row < length; row++) + for (col = 0; col < width; col++) + { + *src_uint16 = (uint16)0xFFFF - *src_uint16; + src_uint16++; + } + break; + case 8: for (row = 0; row < length; row++) + for (col = 0; col < width; col++) + { + *src = (uint8)255 - *src; + src++; + } + break; + case 4: for (row = 0; row < length; row++) + for (col = 0; col < width; col++) + { + bytebuff1 = 16 - (uint8)(*src & 240 >> 4); + bytebuff2 = 16 - (*src & 15); + *src = bytebuff1 << 4 & bytebuff2; + src++; + } + break; + case 2: for (row = 0; row < length; row++) + for (col = 0; col < width; col++) + { + bytebuff1 = 4 - (uint8)(*src & 192 >> 6); + bytebuff2 = 4 - (uint8)(*src & 48 >> 4); + bytebuff3 = 4 - (uint8)(*src & 12 >> 2); + bytebuff4 = 4 - (uint8)(*src & 3); + *src = (bytebuff1 << 6) || (bytebuff2 << 4) || (bytebuff3 << 2) || bytebuff4; + src++; + } + break; + case 1: for (row = 0; row < length; row++) + for (col = 0; col < width; col += 8 /(spp * bps)) + { + *src = ~(*src); + src++; + } + break; + default: TIFFError("invertImage", "Unsupported bit depth %d", bps); + return (-1); + } + + return (0); + } + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiffdither.c b/src/SDL2/external/tiff-4.0.3/tools/tiffdither.c new file mode 100644 index 000000000..3a377ac0a --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiffdither.c @@ -0,0 +1,333 @@ +/* $Id: tiffdither.c,v 1.12 2010-03-10 18:56:50 bfriesen Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +#define streq(a,b) (strcmp(a,b) == 0) +#define strneq(a,b,n) (strncmp(a,b,n) == 0) + +#define CopyField(tag, v) \ + if (TIFFGetField(in, tag, &v)) TIFFSetField(out, tag, v) + +uint32 imagewidth; +uint32 imagelength; +int threshold = 128; + +static void usage(void); + +/* + * Floyd-Steinberg error propragation with threshold. + * This code is stolen from tiffmedian. + */ +static void +fsdither(TIFF* in, TIFF* out) +{ + unsigned char *outline, *inputline, *inptr; + short *thisline, *nextline, *tmpptr; + register unsigned char *outptr; + register short *thisptr, *nextptr; + register uint32 i, j; + uint32 imax, jmax; + int lastline, lastpixel; + int bit; + tsize_t outlinesize; + + imax = imagelength - 1; + jmax = imagewidth - 1; + inputline = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(in)); + thisline = (short *)_TIFFmalloc(imagewidth * sizeof (short)); + nextline = (short *)_TIFFmalloc(imagewidth * sizeof (short)); + outlinesize = TIFFScanlineSize(out); + outline = (unsigned char *) _TIFFmalloc(outlinesize); + + /* + * Get first line + */ + if (TIFFReadScanline(in, inputline, 0, 0) <= 0) + goto skip_on_error; + + inptr = inputline; + nextptr = nextline; + for (j = 0; j < imagewidth; ++j) + *nextptr++ = *inptr++; + for (i = 1; i < imagelength; ++i) { + tmpptr = thisline; + thisline = nextline; + nextline = tmpptr; + lastline = (i == imax); + if (TIFFReadScanline(in, inputline, i, 0) <= 0) + break; + inptr = inputline; + nextptr = nextline; + for (j = 0; j < imagewidth; ++j) + *nextptr++ = *inptr++; + thisptr = thisline; + nextptr = nextline; + _TIFFmemset(outptr = outline, 0, outlinesize); + bit = 0x80; + for (j = 0; j < imagewidth; ++j) { + register int v; + + lastpixel = (j == jmax); + v = *thisptr++; + if (v < 0) + v = 0; + else if (v > 255) + v = 255; + if (v > threshold) { + *outptr |= bit; + v -= 255; + } + bit >>= 1; + if (bit == 0) { + outptr++; + bit = 0x80; + } + if (!lastpixel) + thisptr[0] += v * 7 / 16; + if (!lastline) { + if (j != 0) + nextptr[-1] += v * 3 / 16; + *nextptr++ += v * 5 / 16; + if (!lastpixel) + nextptr[0] += v / 16; + } + } + if (TIFFWriteScanline(out, outline, i-1, 0) < 0) + break; + } + skip_on_error: + _TIFFfree(inputline); + _TIFFfree(thisline); + _TIFFfree(nextline); + _TIFFfree(outline); +} + +static uint16 compression = COMPRESSION_PACKBITS; +static uint16 predictor = 0; +static uint32 group3options = 0; + +static void +processG3Options(char* cp) +{ + if ((cp = strchr(cp, ':'))) { + do { + cp++; + if (strneq(cp, "1d", 2)) + group3options &= ~GROUP3OPT_2DENCODING; + else if (strneq(cp, "2d", 2)) + group3options |= GROUP3OPT_2DENCODING; + else if (strneq(cp, "fill", 4)) + group3options |= GROUP3OPT_FILLBITS; + else + usage(); + } while ((cp = strchr(cp, ':'))); + } +} + +static int +processCompressOptions(char* opt) +{ + if (streq(opt, "none")) + compression = COMPRESSION_NONE; + else if (streq(opt, "packbits")) + compression = COMPRESSION_PACKBITS; + else if (strneq(opt, "g3", 2)) { + processG3Options(opt); + compression = COMPRESSION_CCITTFAX3; + } else if (streq(opt, "g4")) + compression = COMPRESSION_CCITTFAX4; + else if (strneq(opt, "lzw", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_LZW; + } else if (strneq(opt, "zip", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_DEFLATE; + } else + return (0); + return (1); +} + +int +main(int argc, char* argv[]) +{ + TIFF *in, *out; + uint16 samplesperpixel, bitspersample = 1, shortv; + float floatv; + char thing[1024]; + uint32 rowsperstrip = (uint32) -1; + uint16 fillorder = 0; + int c; + extern int optind; + extern char *optarg; + + while ((c = getopt(argc, argv, "c:f:r:t:")) != -1) + switch (c) { + case 'c': /* compression scheme */ + if (!processCompressOptions(optarg)) + usage(); + break; + case 'f': /* fill order */ + if (streq(optarg, "lsb2msb")) + fillorder = FILLORDER_LSB2MSB; + else if (streq(optarg, "msb2lsb")) + fillorder = FILLORDER_MSB2LSB; + else + usage(); + break; + case 'r': /* rows/strip */ + rowsperstrip = atoi(optarg); + break; + case 't': + threshold = atoi(optarg); + if (threshold < 0) + threshold = 0; + else if (threshold > 255) + threshold = 255; + break; + case '?': + usage(); + /*NOTREACHED*/ + } + if (argc - optind < 2) + usage(); + in = TIFFOpen(argv[optind], "r"); + if (in == NULL) + return (-1); + TIFFGetField(in, TIFFTAG_SAMPLESPERPIXEL, &samplesperpixel); + if (samplesperpixel != 1) { + fprintf(stderr, "%s: Not a b&w image.\n", argv[0]); + return (-1); + } + TIFFGetField(in, TIFFTAG_BITSPERSAMPLE, &bitspersample); + if (bitspersample != 8) { + fprintf(stderr, + " %s: Sorry, only handle 8-bit samples.\n", argv[0]); + return (-1); + } + out = TIFFOpen(argv[optind+1], "w"); + if (out == NULL) + return (-1); + CopyField(TIFFTAG_IMAGEWIDTH, imagewidth); + TIFFGetField(in, TIFFTAG_IMAGELENGTH, &imagelength); + TIFFSetField(out, TIFFTAG_IMAGELENGTH, imagelength-1); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, 1); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, 1); + TIFFSetField(out, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + if (fillorder) + TIFFSetField(out, TIFFTAG_FILLORDER, fillorder); + else + CopyField(TIFFTAG_FILLORDER, shortv); + sprintf(thing, "Dithered B&W version of %s", argv[optind]); + TIFFSetField(out, TIFFTAG_IMAGEDESCRIPTION, thing); + CopyField(TIFFTAG_PHOTOMETRIC, shortv); + CopyField(TIFFTAG_ORIENTATION, shortv); + CopyField(TIFFTAG_XRESOLUTION, floatv); + CopyField(TIFFTAG_YRESOLUTION, floatv); + CopyField(TIFFTAG_RESOLUTIONUNIT, shortv); + rowsperstrip = TIFFDefaultStripSize(out, rowsperstrip); + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, rowsperstrip); + switch (compression) { + case COMPRESSION_CCITTFAX3: + TIFFSetField(out, TIFFTAG_GROUP3OPTIONS, group3options); + break; + case COMPRESSION_LZW: + case COMPRESSION_DEFLATE: + if (predictor) + TIFFSetField(out, TIFFTAG_PREDICTOR, predictor); + break; + } + fsdither(in, out); + TIFFClose(in); + TIFFClose(out); + return (0); +} + +char* stuff[] = { +"usage: tiffdither [options] input.tif output.tif", +"where options are:", +" -r # make each strip have no more than # rows", +" -f lsb2msb force lsb-to-msb FillOrder for output", +" -f msb2lsb force msb-to-lsb FillOrder for output", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] compress output with deflate encoding", +" -c packbits compress output with packbits encoding", +" -c g3[:opts] compress output with CCITT Group 3 encoding", +" -c g4 compress output with CCITT Group 4 encoding", +" -c none use no compression algorithm on output", +"", +"Group 3 options:", +" 1d use default CCITT Group 3 1D-encoding", +" 2d use optional CCITT Group 3 2D-encoding", +" fill byte-align EOL codes", +"For example, -c g3:2d:fill to get G3-2D-encoded data with byte-aligned EOLs", +"", +"LZW and deflate options:", +" # set predictor value", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiffdump.c b/src/SDL2/external/tiff-4.0.3/tools/tiffdump.c new file mode 100644 index 000000000..c1caafbc7 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiffdump.c @@ -0,0 +1,855 @@ +/* $Id: tiffdump.c,v 1.26 2012-06-15 21:51:54 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef HAVE_FCNTL_H +# include +#endif + +#ifdef HAVE_SYS_TYPES_H +# include +#endif + +#ifdef HAVE_IO_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#ifndef HAVE_GETOPT +extern int getopt(int, char**, char*); +#endif + +#include "tiffio.h" + +#ifndef O_BINARY +# define O_BINARY 0 +#endif + +static union +{ + TIFFHeaderClassic classic; + TIFFHeaderBig big; + TIFFHeaderCommon common; +} hdr; +char* appname; +char* curfile; +int swabflag; +int bigendian; +int bigtiff; +uint32 maxitems = 24; /* maximum indirect data items to print */ + +const char* bytefmt = "%s%#02x"; /* BYTE */ +const char* sbytefmt = "%s%d"; /* SBYTE */ +const char* shortfmt = "%s%u"; /* SHORT */ +const char* sshortfmt = "%s%d"; /* SSHORT */ +const char* longfmt = "%s%lu"; /* LONG */ +const char* slongfmt = "%s%ld"; /* SLONG */ +const char* ifdfmt = "%s%#04lx"; /* IFD offset */ +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) +const char* long8fmt = "%s%I64u"; /* LONG8 */ +const char* slong8fmt = "%s%I64d"; /* SLONG8 */ +const char* ifd8fmt = "%s%#08I64x"; /* IFD offset8*/ +#else +const char* long8fmt = "%s%llu"; /* LONG8 */ +const char* slong8fmt = "%s%lld"; /* SLONG8 */ +const char* ifd8fmt = "%s%#08llx"; /* IFD offset8*/ +#endif +const char* rationalfmt = "%s%g"; /* RATIONAL */ +const char* srationalfmt = "%s%g"; /* SRATIONAL */ +const char* floatfmt = "%s%g"; /* FLOAT */ +const char* doublefmt = "%s%g"; /* DOUBLE */ + +static void dump(int, uint64); +extern int optind; +extern char* optarg; + +void +usage() +{ + fprintf(stderr, "usage: %s [-h] [-o offset] [-m maxitems] file.tif ...\n", appname); + exit(-1); +} + +int +main(int argc, char* argv[]) +{ + int one = 1, fd; + int multiplefiles = (argc > 1); + int c; + uint64 diroff = 0; + bigendian = (*(char *)&one == 0); + + appname = argv[0]; + while ((c = getopt(argc, argv, "m:o:h")) != -1) { + switch (c) { + case 'h': /* print values in hex */ + shortfmt = "%s%#x"; + sshortfmt = "%s%#x"; + longfmt = "%s%#lx"; + slongfmt = "%s%#lx"; + break; + case 'o': + diroff = (uint64) strtoul(optarg, NULL, 0); + break; + case 'm': + maxitems = strtoul(optarg, NULL, 0); + break; + default: + usage(); + } + } + if (optind >= argc) + usage(); + for (; optind < argc; optind++) { + fd = open(argv[optind], O_RDONLY|O_BINARY, 0); + if (fd < 0) { + perror(argv[0]); + return (-1); + } + if (multiplefiles) + printf("%s:\n", argv[optind]); + curfile = argv[optind]; + swabflag = 0; + bigtiff = 0; + dump(fd, diroff); + close(fd); + } + return (0); +} + +#define ord(e) ((int)e) + +static uint64 ReadDirectory(int, unsigned, uint64); +static void ReadError(char*); +static void Error(const char*, ...); +static void Fatal(const char*, ...); + +static void +dump(int fd, uint64 diroff) +{ + unsigned i; + + lseek(fd, (off_t) 0, 0); + if (read(fd, (char*) &hdr, sizeof (TIFFHeaderCommon)) != sizeof (TIFFHeaderCommon)) + ReadError("TIFF header"); + if (hdr.common.tiff_magic != TIFF_BIGENDIAN + && hdr.common.tiff_magic != TIFF_LITTLEENDIAN && +#if HOST_BIGENDIAN + /* MDI is sensitive to the host byte order, unlike TIFF */ + MDI_BIGENDIAN != hdr.common.tiff_magic +#else + MDI_LITTLEENDIAN != hdr.common.tiff_magic +#endif + ) { + Fatal("Not a TIFF or MDI file, bad magic number %u (%#x)", + hdr.common.tiff_magic, hdr.common.tiff_magic); + } + if (hdr.common.tiff_magic == TIFF_BIGENDIAN + || hdr.common.tiff_magic == MDI_BIGENDIAN) + swabflag = !bigendian; + else + swabflag = bigendian; + if (swabflag) + TIFFSwabShort(&hdr.common.tiff_version); + if (hdr.common.tiff_version==42) + { + if (read(fd, (char*) &hdr.classic.tiff_diroff, 4) != 4) + ReadError("TIFF header"); + if (swabflag) + TIFFSwabLong(&hdr.classic.tiff_diroff); + printf("Magic: %#x <%s-endian> Version: %#x <%s>\n", + hdr.classic.tiff_magic, + hdr.classic.tiff_magic == TIFF_BIGENDIAN ? "big" : "little", + 42,"ClassicTIFF"); + if (diroff == 0) + diroff = hdr.classic.tiff_diroff; + } + else if (hdr.common.tiff_version==43) + { + if (read(fd, (char*) &hdr.big.tiff_offsetsize, 12) != 12) + ReadError("TIFF header"); + if (swabflag) + { + TIFFSwabShort(&hdr.big.tiff_offsetsize); + TIFFSwabShort(&hdr.big.tiff_unused); + TIFFSwabLong8(&hdr.big.tiff_diroff); + } + printf("Magic: %#x <%s-endian> Version: %#x <%s>\n", + hdr.big.tiff_magic, + hdr.big.tiff_magic == TIFF_BIGENDIAN ? "big" : "little", + 43,"BigTIFF"); + printf("OffsetSize: %#x Unused: %#x\n", + hdr.big.tiff_offsetsize,hdr.big.tiff_unused); + if (diroff == 0) + diroff = hdr.big.tiff_diroff; + bigtiff = 1; + } + else + Fatal("Not a TIFF file, bad version number %u (%#x)", + hdr.common.tiff_version, hdr.common.tiff_version); + for (i = 0; diroff != 0; i++) { + if (i > 0) + putchar('\n'); + diroff = ReadDirectory(fd, i, diroff); + } +} + +static const int datawidth[] = { + 0, /* 00 = undefined */ + 1, /* 01 = TIFF_BYTE */ + 1, /* 02 = TIFF_ASCII */ + 2, /* 03 = TIFF_SHORT */ + 4, /* 04 = TIFF_LONG */ + 8, /* 05 = TIFF_RATIONAL */ + 1, /* 06 = TIFF_SBYTE */ + 1, /* 07 = TIFF_UNDEFINED */ + 2, /* 08 = TIFF_SSHORT */ + 4, /* 09 = TIFF_SLONG */ + 8, /* 10 = TIFF_SRATIONAL */ + 4, /* 11 = TIFF_FLOAT */ + 8, /* 12 = TIFF_DOUBLE */ + 4, /* 13 = TIFF_IFD */ + 0, /* 14 = undefined */ + 0, /* 15 = undefined */ + 8, /* 16 = TIFF_LONG8 */ + 8, /* 17 = TIFF_SLONG8 */ + 8, /* 18 = TIFF_IFD8 */ +}; +#define NWIDTHS (sizeof (datawidth) / sizeof (datawidth[0])) +static void PrintTag(FILE*, uint16); +static void PrintType(FILE*, uint16); +static void PrintData(FILE*, uint16, uint32, unsigned char*); + +/* + * Read the next TIFF directory from a file + * and convert it to the internal format. + * We read directories sequentially. + */ +static uint64 +ReadDirectory(int fd, unsigned int ix, uint64 off) +{ + uint16 dircount; + uint32 direntrysize; + void* dirmem = NULL; + uint64 nextdiroff = 0; + uint32 n; + uint8* dp; + + if (off == 0) /* no more directories */ + goto done; +#if defined(__WIN32__) && defined(_MSC_VER) + if (_lseeki64(fd, (__int64)off, SEEK_SET) != (__int64)off) { +#else + if (lseek(fd, (off_t)off, SEEK_SET) != (off_t)off) { +#endif + Fatal("Seek error accessing TIFF directory"); + goto done; + } + if (!bigtiff) { + if (read(fd, (char*) &dircount, sizeof (uint16)) != sizeof (uint16)) { + ReadError("directory count"); + goto done; + } + if (swabflag) + TIFFSwabShort(&dircount); + direntrysize = 12; + } else { + uint64 dircount64 = 0; + if (read(fd, (char*) &dircount64, sizeof (uint64)) != sizeof (uint64)) { + ReadError("directory count"); + goto done; + } + if (swabflag) + TIFFSwabLong8(&dircount64); + if (dircount64>0xFFFF) { + Error("Sanity check on directory count failed"); + goto done; + } + dircount = (uint16)dircount64; + direntrysize = 20; + } + dirmem = _TIFFmalloc(dircount * direntrysize); + if (dirmem == NULL) { + Fatal("No space for TIFF directory"); + goto done; + } + n = read(fd, (char*) dirmem, dircount*direntrysize); + if (n != dircount*direntrysize) { + n /= direntrysize; + Error( +#if defined(__WIN32__) && defined(_MSC_VER) + "Could only read %lu of %u entries in directory at offset %#I64x", + (unsigned long)n, dircount, (unsigned __int64) off); +#else + "Could only read %lu of %u entries in directory at offset %#llx", + (unsigned long)n, dircount, (unsigned long long) off); +#endif + dircount = n; + nextdiroff = 0; + } else { + if (!bigtiff) { + uint32 nextdiroff32; + if (read(fd, (char*) &nextdiroff32, sizeof (uint32)) != sizeof (uint32)) + nextdiroff32 = 0; + if (swabflag) + TIFFSwabLong(&nextdiroff32); + nextdiroff = nextdiroff32; + } else { + if (read(fd, (char*) &nextdiroff, sizeof (uint64)) != sizeof (uint64)) + nextdiroff = 0; + if (swabflag) + TIFFSwabLong8(&nextdiroff); + } + } +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + printf("Directory %u: offset %I64u (%#I64x) next %I64u (%#I64x)\n", ix, + (unsigned __int64)off, (unsigned __int64)off, + (unsigned __int64)nextdiroff, (unsigned __int64)nextdiroff); +#else + printf("Directory %u: offset %llu (%#llx) next %llu (%#llx)\n", ix, + (unsigned long long)off, (unsigned long long)off, + (unsigned long long)nextdiroff, (unsigned long long)nextdiroff); +#endif + for (dp = (uint8*)dirmem, n = dircount; n > 0; n--) { + uint16 tag; + uint16 type; + uint16 typewidth; + uint64 count; + uint64 datasize; + int datafits; + void* datamem; + uint64 dataoffset; + int datatruncated; + tag = *(uint16*)dp; + if (swabflag) + TIFFSwabShort(&tag); + dp += sizeof(uint16); + type = *(uint16*)dp; + dp += sizeof(uint16); + if (swabflag) + TIFFSwabShort(&type); + PrintTag(stdout, tag); + putchar(' '); + PrintType(stdout, type); + putchar(' '); + if (!bigtiff) + { + uint32 count32; + count32 = *(uint32*)dp; + if (swabflag) + TIFFSwabLong(&count32); + dp += sizeof(uint32); + count = count32; + } + else + { + count = *(uint64*)dp; + if (swabflag) + TIFFSwabLong8(&count); + dp += sizeof(uint64); + } +#if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) + printf("%I64u<", (unsigned __int64)count); +#else + printf("%llu<", (unsigned long long)count); +#endif + if (type >= NWIDTHS) + typewidth = 0; + else + typewidth = datawidth[type]; + datasize = count*typewidth; + datafits = 1; + datamem = dp; + dataoffset = 0; + datatruncated = 0; + if (!bigtiff) + { + if (datasize>4) + { + uint32 dataoffset32; + datafits = 0; + datamem = NULL; + dataoffset32 = *(uint32*)dp; + if (swabflag) + TIFFSwabLong(&dataoffset32); + dataoffset = dataoffset32; + } + dp += sizeof(uint32); + } + else + { + if (datasize>8) + { + datafits = 0; + datamem = NULL; + dataoffset = *(uint64*)dp; + if (swabflag) + TIFFSwabLong8(&dataoffset); + } + dp += sizeof(uint64); + } + if (datasize>0x10000) + { + datatruncated = 1; + count = 0x10000/typewidth; + datasize = count*typewidth; + } + if (count>maxitems) + { + datatruncated = 1; + count = maxitems; + datasize = count*typewidth; + } + if (!datafits) + { + datamem = _TIFFmalloc((uint32)datasize); + if (datamem) { +#if defined(__WIN32__) && defined(_MSC_VER) + if (_lseeki64(fd, (__int64)dataoffset, SEEK_SET) + != (__int64)dataoffset) +#else + if (lseek(fd, (off_t)dataoffset, 0) != + (off_t)dataoffset) +#endif + { + Error( + "Seek error accessing tag %u value", tag); + _TIFFfree(datamem); + datamem = NULL; + } + if (read(fd, datamem, (size_t)datasize) != (TIFF_SSIZE_T)datasize) + { + Error( + "Read error accessing tag %u value", tag); + _TIFFfree(datamem); + datamem = NULL; + } + } else + Error("No space for data for tag %u",tag); + } + if (datamem) + { + if (swabflag) + { + switch (type) + { + case TIFF_BYTE: + case TIFF_ASCII: + case TIFF_SBYTE: + case TIFF_UNDEFINED: + break; + case TIFF_SHORT: + case TIFF_SSHORT: + TIFFSwabArrayOfShort((uint16*)datamem,(tmsize_t)count); + break; + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_FLOAT: + case TIFF_IFD: + TIFFSwabArrayOfLong((uint32*)datamem,(tmsize_t)count); + break; + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + TIFFSwabArrayOfLong((uint32*)datamem,(tmsize_t)count*2); + break; + case TIFF_DOUBLE: + case TIFF_LONG8: + case TIFF_SLONG8: + case TIFF_IFD8: + TIFFSwabArrayOfLong8((uint64*)datamem,(tmsize_t)count); + break; + } + } + PrintData(stdout,type,(uint32)count,datamem); + if (datatruncated) + printf(" ..."); + if (!datafits) + _TIFFfree(datamem); + } + printf(">\n"); + } +done: + if (dirmem) + _TIFFfree((char *)dirmem); + return (nextdiroff); +} + +static const struct tagname { + uint16 tag; + const char* name; +} tagnames[] = { + { TIFFTAG_SUBFILETYPE, "SubFileType" }, + { TIFFTAG_OSUBFILETYPE, "OldSubFileType" }, + { TIFFTAG_IMAGEWIDTH, "ImageWidth" }, + { TIFFTAG_IMAGELENGTH, "ImageLength" }, + { TIFFTAG_BITSPERSAMPLE, "BitsPerSample" }, + { TIFFTAG_COMPRESSION, "Compression" }, + { TIFFTAG_PHOTOMETRIC, "Photometric" }, + { TIFFTAG_THRESHHOLDING, "Threshholding" }, + { TIFFTAG_CELLWIDTH, "CellWidth" }, + { TIFFTAG_CELLLENGTH, "CellLength" }, + { TIFFTAG_FILLORDER, "FillOrder" }, + { TIFFTAG_DOCUMENTNAME, "DocumentName" }, + { TIFFTAG_IMAGEDESCRIPTION, "ImageDescription" }, + { TIFFTAG_MAKE, "Make" }, + { TIFFTAG_MODEL, "Model" }, + { TIFFTAG_STRIPOFFSETS, "StripOffsets" }, + { TIFFTAG_ORIENTATION, "Orientation" }, + { TIFFTAG_SAMPLESPERPIXEL, "SamplesPerPixel" }, + { TIFFTAG_ROWSPERSTRIP, "RowsPerStrip" }, + { TIFFTAG_STRIPBYTECOUNTS, "StripByteCounts" }, + { TIFFTAG_MINSAMPLEVALUE, "MinSampleValue" }, + { TIFFTAG_MAXSAMPLEVALUE, "MaxSampleValue" }, + { TIFFTAG_XRESOLUTION, "XResolution" }, + { TIFFTAG_YRESOLUTION, "YResolution" }, + { TIFFTAG_PLANARCONFIG, "PlanarConfig" }, + { TIFFTAG_PAGENAME, "PageName" }, + { TIFFTAG_XPOSITION, "XPosition" }, + { TIFFTAG_YPOSITION, "YPosition" }, + { TIFFTAG_FREEOFFSETS, "FreeOffsets" }, + { TIFFTAG_FREEBYTECOUNTS, "FreeByteCounts" }, + { TIFFTAG_GRAYRESPONSEUNIT, "GrayResponseUnit" }, + { TIFFTAG_GRAYRESPONSECURVE,"GrayResponseCurve" }, + { TIFFTAG_GROUP3OPTIONS, "Group3Options" }, + { TIFFTAG_GROUP4OPTIONS, "Group4Options" }, + { TIFFTAG_RESOLUTIONUNIT, "ResolutionUnit" }, + { TIFFTAG_PAGENUMBER, "PageNumber" }, + { TIFFTAG_COLORRESPONSEUNIT,"ColorResponseUnit" }, + { TIFFTAG_TRANSFERFUNCTION, "TransferFunction" }, + { TIFFTAG_SOFTWARE, "Software" }, + { TIFFTAG_DATETIME, "DateTime" }, + { TIFFTAG_ARTIST, "Artist" }, + { TIFFTAG_HOSTCOMPUTER, "HostComputer" }, + { TIFFTAG_PREDICTOR, "Predictor" }, + { TIFFTAG_WHITEPOINT, "Whitepoint" }, + { TIFFTAG_PRIMARYCHROMATICITIES,"PrimaryChromaticities" }, + { TIFFTAG_COLORMAP, "Colormap" }, + { TIFFTAG_HALFTONEHINTS, "HalftoneHints" }, + { TIFFTAG_TILEWIDTH, "TileWidth" }, + { TIFFTAG_TILELENGTH, "TileLength" }, + { TIFFTAG_TILEOFFSETS, "TileOffsets" }, + { TIFFTAG_TILEBYTECOUNTS, "TileByteCounts" }, + { TIFFTAG_BADFAXLINES, "BadFaxLines" }, + { TIFFTAG_CLEANFAXDATA, "CleanFaxData" }, + { TIFFTAG_CONSECUTIVEBADFAXLINES, "ConsecutiveBadFaxLines" }, + { TIFFTAG_SUBIFD, "SubIFD" }, + { TIFFTAG_INKSET, "InkSet" }, + { TIFFTAG_INKNAMES, "InkNames" }, + { TIFFTAG_NUMBEROFINKS, "NumberOfInks" }, + { TIFFTAG_DOTRANGE, "DotRange" }, + { TIFFTAG_TARGETPRINTER, "TargetPrinter" }, + { TIFFTAG_EXTRASAMPLES, "ExtraSamples" }, + { TIFFTAG_SAMPLEFORMAT, "SampleFormat" }, + { TIFFTAG_SMINSAMPLEVALUE, "SMinSampleValue" }, + { TIFFTAG_SMAXSAMPLEVALUE, "SMaxSampleValue" }, + { TIFFTAG_JPEGPROC, "JPEGProcessingMode" }, + { TIFFTAG_JPEGIFOFFSET, "JPEGInterchangeFormat" }, + { TIFFTAG_JPEGIFBYTECOUNT, "JPEGInterchangeFormatLength" }, + { TIFFTAG_JPEGRESTARTINTERVAL,"JPEGRestartInterval" }, + { TIFFTAG_JPEGLOSSLESSPREDICTORS,"JPEGLosslessPredictors" }, + { TIFFTAG_JPEGPOINTTRANSFORM,"JPEGPointTransform" }, + { TIFFTAG_JPEGTABLES, "JPEGTables" }, + { TIFFTAG_JPEGQTABLES, "JPEGQTables" }, + { TIFFTAG_JPEGDCTABLES, "JPEGDCTables" }, + { TIFFTAG_JPEGACTABLES, "JPEGACTables" }, + { TIFFTAG_YCBCRCOEFFICIENTS,"YCbCrCoefficients" }, + { TIFFTAG_YCBCRSUBSAMPLING, "YCbCrSubsampling" }, + { TIFFTAG_YCBCRPOSITIONING, "YCbCrPositioning" }, + { TIFFTAG_REFERENCEBLACKWHITE, "ReferenceBlackWhite" }, + { TIFFTAG_REFPTS, "IgReferencePoints (Island Graphics)" }, + { TIFFTAG_REGIONTACKPOINT, "IgRegionTackPoint (Island Graphics)" }, + { TIFFTAG_REGIONWARPCORNERS,"IgRegionWarpCorners (Island Graphics)" }, + { TIFFTAG_REGIONAFFINE, "IgRegionAffine (Island Graphics)" }, + { TIFFTAG_MATTEING, "OBSOLETE Matteing (Silicon Graphics)" }, + { TIFFTAG_DATATYPE, "OBSOLETE DataType (Silicon Graphics)" }, + { TIFFTAG_IMAGEDEPTH, "ImageDepth (Silicon Graphics)" }, + { TIFFTAG_TILEDEPTH, "TileDepth (Silicon Graphics)" }, + { 32768, "OLD BOGUS Matteing tag" }, + { TIFFTAG_COPYRIGHT, "Copyright" }, + { TIFFTAG_ICCPROFILE, "ICC Profile" }, + { TIFFTAG_JBIGOPTIONS, "JBIG Options" }, + { TIFFTAG_STONITS, "StoNits" }, +}; +#define NTAGS (sizeof (tagnames) / sizeof (tagnames[0])) + +static void +PrintTag(FILE* fd, uint16 tag) +{ + const struct tagname *tp; + + for (tp = tagnames; tp < &tagnames[NTAGS]; tp++) + if (tp->tag == tag) { + fprintf(fd, "%s (%u)", tp->name, tag); + return; + } + fprintf(fd, "%u (%#x)", tag, tag); +} + +static void +PrintType(FILE* fd, uint16 type) +{ + static const char *typenames[] = { + "0", + "BYTE", + "ASCII", + "SHORT", + "LONG", + "RATIONAL", + "SBYTE", + "UNDEFINED", + "SSHORT", + "SLONG", + "SRATIONAL", + "FLOAT", + "DOUBLE", + "IFD", + "14", + "15", + "LONG8", + "SLONG8", + "IFD8" + }; +#define NTYPES (sizeof (typenames) / sizeof (typenames[0])) + + if (type < NTYPES) + fprintf(fd, "%s (%u)", typenames[type], type); + else + fprintf(fd, "%u (%#x)", type, type); +} +#undef NTYPES + +#include + +static void +PrintASCII(FILE* fd, uint32 cc, const unsigned char* cp) +{ + for (; cc > 0; cc--, cp++) { + const char* tp; + + if (isprint(*cp)) { + fputc(*cp, fd); + continue; + } + for (tp = "\tt\bb\rr\nn\vv"; *tp; tp++) + if (*tp++ == *cp) + break; + if (*tp) + fprintf(fd, "\\%c", *tp); + else if (*cp) + fprintf(fd, "\\%03o", *cp); + else + fprintf(fd, "\\0"); + } +} + +static void +PrintData(FILE* fd, uint16 type, uint32 count, unsigned char* data) +{ + char* sep = ""; + + switch (type) { + case TIFF_BYTE: + while (count-- > 0) + fprintf(fd, bytefmt, sep, *data++), sep = " "; + break; + case TIFF_SBYTE: + while (count-- > 0) + fprintf(fd, sbytefmt, sep, *(char *)data++), sep = " "; + break; + case TIFF_UNDEFINED: + while (count-- > 0) + fprintf(fd, bytefmt, sep, *data++), sep = " "; + break; + case TIFF_ASCII: + PrintASCII(fd, count, data); + break; + case TIFF_SHORT: { + uint16 *wp = (uint16*)data; + while (count-- > 0) + fprintf(fd, shortfmt, sep, *wp++), sep = " "; + break; + } + case TIFF_SSHORT: { + int16 *wp = (int16*)data; + while (count-- > 0) + fprintf(fd, sshortfmt, sep, *wp++), sep = " "; + break; + } + case TIFF_LONG: { + uint32 *lp = (uint32*)data; + while (count-- > 0) { + fprintf(fd, longfmt, sep, (unsigned long) *lp++); + sep = " "; + } + break; + } + case TIFF_SLONG: { + int32 *lp = (int32*)data; + while (count-- > 0) + fprintf(fd, slongfmt, sep, (long) *lp++), sep = " "; + break; + } + case TIFF_LONG8: { + uint64 *llp = (uint64*)data; + while (count-- > 0) { +#if defined(__WIN32__) && defined(_MSC_VER) + fprintf(fd, long8fmt, sep, (unsigned __int64) *llp++); +#else + fprintf(fd, long8fmt, sep, (unsigned long long) *llp++); +#endif + sep = " "; + } + break; + } + case TIFF_SLONG8: { + int64 *llp = (int64*)data; + while (count-- > 0) +#if defined(__WIN32__) && defined(_MSC_VER) + fprintf(fd, slong8fmt, sep, (__int64) *llp++), sep = " "; +#else + fprintf(fd, slong8fmt, sep, (long long) *llp++), sep = " "; +#endif + break; + } + case TIFF_RATIONAL: { + uint32 *lp = (uint32*)data; + while (count-- > 0) { + if (lp[1] == 0) + fprintf(fd, "%sNan (%lu/%lu)", sep, + (unsigned long) lp[0], + (unsigned long) lp[1]); + else + fprintf(fd, rationalfmt, sep, + (double)lp[0] / (double)lp[1]); + sep = " "; + lp += 2; + } + break; + } + case TIFF_SRATIONAL: { + int32 *lp = (int32*)data; + while (count-- > 0) { + if (lp[1] == 0) + fprintf(fd, "%sNan (%ld/%ld)", sep, + (long) lp[0], (long) lp[1]); + else + fprintf(fd, srationalfmt, sep, + (double)lp[0] / (double)lp[1]); + sep = " "; + lp += 2; + } + break; + } + case TIFF_FLOAT: { + float *fp = (float *)data; + while (count-- > 0) + fprintf(fd, floatfmt, sep, *fp++), sep = " "; + break; + } + case TIFF_DOUBLE: { + double *dp = (double *)data; + while (count-- > 0) + fprintf(fd, doublefmt, sep, *dp++), sep = " "; + break; + } + case TIFF_IFD: { + uint32 *lp = (uint32*)data; + while (count-- > 0) { + fprintf(fd, ifdfmt, sep, (unsigned long) *lp++); + sep = " "; + } + break; + } + case TIFF_IFD8: { + uint64 *llp = (uint64*)data; + while (count-- > 0) { +#if defined(__WIN32__) && defined(_MSC_VER) + fprintf(fd, ifd8fmt, sep, (unsigned __int64) *llp++); +#else + fprintf(fd, ifd8fmt, sep, (unsigned long long) *llp++); +#endif + sep = " "; + } + break; + } + } +} + +static void +ReadError(char* what) +{ + Fatal("Error while reading %s", what); +} + +#include + +static void +vError(FILE* fd, const char* fmt, va_list ap) +{ + fprintf(fd, "%s: ", curfile); + vfprintf(fd, fmt, ap); + fprintf(fd, ".\n"); +} + +static void +Error(const char* fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + vError(stderr, fmt, ap); + va_end(ap); +} + +static void +Fatal(const char* fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + vError(stderr, fmt, ap); + va_end(ap); + exit(-1); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiffgt.c b/src/SDL2/external/tiff-4.0.3/tools/tiffgt.c new file mode 100644 index 000000000..de420396c --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiffgt.c @@ -0,0 +1,466 @@ +/* $Id: tiffgt.c,v 1.10 2010-07-01 15:56:56 dron Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * Copyright (c) 2003, Andrey Kiselev + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" +#include +#include +#include +#include + +#if HAVE_APPLE_OPENGL_FRAMEWORK +# include +# include +#else +# include +# include +#endif + +#include "tiffio.h" +#include "tiffiop.h" + +#ifndef HAVE_GETOPT +extern int getopt(int, char**, char*); +#endif + +static uint32 width = 0, height = 0; /* window width & height */ +static uint32* raster = NULL; /* displayable image */ +static TIFFRGBAImage img; +static int order0 = 0, order; +static uint16 photo0 = (uint16) -1, photo; +static int stoponerr = 0; /* stop on read error */ +static int verbose = 0; +#define TITLE_LENGTH 1024 +static char title[TITLE_LENGTH]; /* window title line */ +static uint32 xmax, ymax; +static char** filelist = NULL; +static int fileindex; +static int filenum; +static TIFFErrorHandler oerror; +static TIFFErrorHandler owarning; + +static void cleanup_and_exit(void); +static int initImage(void); +static int prevImage(void); +static int nextImage(void); +static void setWindowSize(void); +static void usage(void); +static uint16 photoArg(const char*); +static void raster_draw(void); +static void raster_reshape(int, int); +static void raster_keys(unsigned char, int, int); +static void raster_special(int, int, int); + +extern char* optarg; +extern int optind; +static TIFF* tif = NULL; + +int +main(int argc, char* argv[]) +{ + int c; + int dirnum = -1; + uint32 diroff = 0; + + oerror = TIFFSetErrorHandler(NULL); + owarning = TIFFSetWarningHandler(NULL); + while ((c = getopt(argc, argv, "d:o:p:eflmsvw?")) != -1) + switch (c) { + case 'd': + dirnum = atoi(optarg); + break; + case 'e': + oerror = TIFFSetErrorHandler(oerror); + break; + case 'l': + order0 = FILLORDER_LSB2MSB; + break; + case 'm': + order0 = FILLORDER_MSB2LSB; + break; + case 'o': + diroff = strtoul(optarg, NULL, 0); + break; + case 'p': + photo0 = photoArg(optarg); + break; + case 's': + stoponerr = 1; + break; + case 'w': + owarning = TIFFSetWarningHandler(owarning); + break; + case 'v': + verbose = 1; + break; + case '?': + usage(); + /*NOTREACHED*/ + } + filenum = argc - optind; + if ( filenum < 1) + usage(); + + glutInit(&argc, argv); + glutInitDisplayMode(GLUT_SINGLE | GLUT_RGB); + + /* + * Get the screen size + */ + xmax = glutGet(GLUT_SCREEN_WIDTH); + ymax = glutGet(GLUT_SCREEN_HEIGHT); + + /* + * Use 90% of the screen size + */ + xmax = xmax - xmax / 10.0; + ymax = ymax - ymax / 10.0; + + filelist = (char **) _TIFFmalloc(filenum * sizeof(char*)); + if (!filelist) { + TIFFError(argv[0], "Can not allocate space for the file list."); + return 1; + } + _TIFFmemcpy(filelist, argv + optind, filenum * sizeof(char*)); + fileindex = -1; + if (nextImage() < 0) { + _TIFFfree(filelist); + return 2; + } + /* + * Set initial directory if user-specified + * file was opened successfully. + */ + if (dirnum != -1 && !TIFFSetDirectory(tif, dirnum)) + TIFFError(argv[0], "Error, seeking to directory %d", dirnum); + if (diroff != 0 && !TIFFSetSubDirectory(tif, diroff)) + TIFFError(argv[0], "Error, setting subdirectory at %#x", diroff); + order = order0; + photo = photo0; + if (initImage() < 0){ + _TIFFfree(filelist); + return 3; + } + /* + * Create a new window or reconfigure an existing + * one to suit the image to be displayed. + */ + glutInitWindowSize(width, height); + snprintf(title, TITLE_LENGTH - 1, "%s [%u]", filelist[fileindex], + (unsigned int) TIFFCurrentDirectory(tif)); + glutCreateWindow(title); + glutDisplayFunc(raster_draw); + glutReshapeFunc(raster_reshape); + glutKeyboardFunc(raster_keys); + glutSpecialFunc(raster_special); + glutMainLoop(); + + cleanup_and_exit(); + return 0; +} + +static void +cleanup_and_exit(void) +{ + TIFFRGBAImageEnd(&img); + if (filelist != NULL) + _TIFFfree(filelist); + if (raster != NULL) + _TIFFfree(raster); + if (tif != NULL) + TIFFClose(tif); + exit(0); +} + +static int +initImage(void) +{ + uint32 w, h; + + if (order) + TIFFSetField(tif, TIFFTAG_FILLORDER, order); + if (photo != (uint16) -1) + TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, photo); + if (!TIFFRGBAImageBegin(&img, tif, stoponerr, title)) { + TIFFError(filelist[fileindex], "%s", title); + TIFFClose(tif); + tif = NULL; + return -1; + } + + /* + * Setup the image raster as required. + */ + h = img.height; + w = img.width; + if (h > ymax) { + w = (int)(w * ((float)ymax / h)); + h = ymax; + } + if (w > xmax) { + h = (int)(h * ((float)xmax / w)); + w = xmax; + } + + if (w != width || h != height) { + uint32 rastersize = + _TIFFMultiply32(tif, img.width, img.height, "allocating raster buffer"); + if (raster != NULL) + _TIFFfree(raster), raster = NULL; + raster = (uint32*) _TIFFCheckMalloc(tif, rastersize, sizeof (uint32), + "allocating raster buffer"); + if (raster == NULL) { + width = height = 0; + TIFFError(filelist[fileindex], "No space for raster buffer"); + cleanup_and_exit(); + } + width = w; + height = h; + } + TIFFRGBAImageGet(&img, raster, img.width, img.height); +#if HOST_BIGENDIAN + TIFFSwabArrayOfLong(raster,img.width*img.height); +#endif + return 0; +} + +static int +prevImage(void) +{ + if (fileindex > 0) + fileindex--; + else if (tif) + return fileindex; + if (tif) + TIFFClose(tif); + tif = TIFFOpen(filelist[fileindex], "r"); + if (tif == NULL) + return -1; + return fileindex; +} + +static int +nextImage(void) +{ + if (fileindex < filenum - 1) + fileindex++; + else if (tif) + return fileindex; + if (tif) + TIFFClose(tif); + tif = TIFFOpen(filelist[fileindex], "r"); + if (tif == NULL) + return -1; + return fileindex; +} + +static void +setWindowSize(void) +{ + glutReshapeWindow(width, height); +} + +static void +raster_draw(void) +{ + glDrawPixels(img.width, img.height, GL_RGBA, GL_UNSIGNED_BYTE, (const GLvoid *) raster); +} + +static void +raster_reshape(int win_w, int win_h) +{ + GLfloat xratio = (GLfloat)win_w/img.width; + GLfloat yratio = (GLfloat)win_h/img.height; + int ratio = (int)(((xratio > yratio)?xratio:yratio) * 100); + + glPixelZoom(xratio, yratio); + glViewport(0, 0, win_w, win_h); + snprintf(title, 1024, "%s [%u] %d%%", filelist[fileindex], + (unsigned int) TIFFCurrentDirectory(tif), ratio); + glutSetWindowTitle(title); +} + +static void +raster_keys(unsigned char key, int x, int y) +{ + switch (key) { + case 'b': /* photometric MinIsBlack */ + photo = PHOTOMETRIC_MINISBLACK; + initImage(); + break; + case 'l': /* lsb-to-msb FillOrder */ + order = FILLORDER_LSB2MSB; + initImage(); + break; + case 'm': /* msb-to-lsb FillOrder */ + order = FILLORDER_MSB2LSB; + initImage(); + break; + case 'w': /* photometric MinIsWhite */ + photo = PHOTOMETRIC_MINISWHITE; + initImage(); + break; + case 'W': /* toggle warnings */ + owarning = TIFFSetWarningHandler(owarning); + initImage(); + break; + case 'E': /* toggle errors */ + oerror = TIFFSetErrorHandler(oerror); + initImage(); + break; + case 'z': /* reset to defaults */ + case 'Z': + order = order0; + photo = photo0; + if (owarning == NULL) + owarning = TIFFSetWarningHandler(NULL); + if (oerror == NULL) + oerror = TIFFSetErrorHandler(NULL); + initImage(); + break; + case 'q': /* exit */ + case '\033': + cleanup_and_exit(); + } + glutPostRedisplay(); +} + +static void +raster_special(int key, int x, int y) +{ + switch (key) { + case GLUT_KEY_PAGE_UP: /* previous logical image */ + if (TIFFCurrentDirectory(tif) > 0) { + if (TIFFSetDirectory(tif, + TIFFCurrentDirectory(tif)-1)) { + initImage(); + setWindowSize(); + } + } else { + TIFFRGBAImageEnd(&img); + prevImage(); + initImage(); + setWindowSize(); + } + break; + case GLUT_KEY_PAGE_DOWN: /* next logical image */ + if (!TIFFLastDirectory(tif)) { + if (TIFFReadDirectory(tif)) { + initImage(); + setWindowSize(); + } + } else { + TIFFRGBAImageEnd(&img); + nextImage(); + initImage(); + setWindowSize(); + } + break; + case GLUT_KEY_HOME: /* 1st image in current file */ + if (TIFFSetDirectory(tif, 0)) { + TIFFRGBAImageEnd(&img); + initImage(); + setWindowSize(); + } + break; + case GLUT_KEY_END: /* last image in current file */ + TIFFRGBAImageEnd(&img); + while (!TIFFLastDirectory(tif)) + TIFFReadDirectory(tif); + initImage(); + setWindowSize(); + break; + } + glutPostRedisplay(); +} + + + +char* stuff[] = { +"usage: tiffgt [options] file.tif", +"where options are:", +" -c use colormap visual", +" -d dirnum set initial directory (default is 0)", +" -e enable display of TIFF error messages", +" -l force lsb-to-msb FillOrder", +" -m force msb-to-lsb FillOrder", +" -o offset set initial directory offset", +" -p photo override photometric interpretation", +" -r use fullcolor visual", +" -s stop decoding on first error (default is ignore errors)", +" -v enable verbose mode", +" -w enable display of TIFF warning messages", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +static uint16 +photoArg(const char* arg) +{ + if (strcmp(arg, "miniswhite") == 0) + return (PHOTOMETRIC_MINISWHITE); + else if (strcmp(arg, "minisblack") == 0) + return (PHOTOMETRIC_MINISBLACK); + else if (strcmp(arg, "rgb") == 0) + return (PHOTOMETRIC_RGB); + else if (strcmp(arg, "palette") == 0) + return (PHOTOMETRIC_PALETTE); + else if (strcmp(arg, "mask") == 0) + return (PHOTOMETRIC_MASK); + else if (strcmp(arg, "separated") == 0) + return (PHOTOMETRIC_SEPARATED); + else if (strcmp(arg, "ycbcr") == 0) + return (PHOTOMETRIC_YCBCR); + else if (strcmp(arg, "cielab") == 0) + return (PHOTOMETRIC_CIELAB); + else if (strcmp(arg, "logl") == 0) + return (PHOTOMETRIC_LOGL); + else if (strcmp(arg, "logluv") == 0) + return (PHOTOMETRIC_LOGLUV); + else + return ((uint16) -1); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiffinfo.c b/src/SDL2/external/tiff-4.0.3/tools/tiffinfo.c new file mode 100644 index 000000000..ae1a5f62e --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiffinfo.c @@ -0,0 +1,472 @@ +/* $Id: tiffinfo.c,v 1.21 2012-06-06 06:05:29 fwarmerdam Exp $ */ + +/* + * Copyright (c) 1988-1997 Sam Leffler + * Copyright (c) 1991-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include + +#ifdef HAVE_STRINGS_H +# include +#endif + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffiop.h" + +static TIFFErrorHandler old_error_handler = 0; +static int status = 0; /* exit status */ +static int showdata = 0; /* show data */ +static int rawdata = 0; /* show raw/decoded data */ +static int showwords = 0; /* show data as bytes/words */ +static int readdata = 0; /* read data in file */ +static int stoponerr = 1; /* stop on first read error */ + +static void usage(void); +static void tiffinfo(TIFF*, uint16, long, int); + +static void +PrivateErrorHandler(const char* module, const char* fmt, va_list ap) +{ + if (old_error_handler) + (*old_error_handler)(module,fmt,ap); + status = 1; +} + +int +main(int argc, char* argv[]) +{ + int dirnum = -1, multiplefiles, c; + uint16 order = 0; + TIFF* tif; + extern int optind; + extern char* optarg; + long flags = 0; + uint64 diroff = 0; + int chopstrips = 0; /* disable strip chopping */ + + while ((c = getopt(argc, argv, "f:o:cdDSjilmrsvwz0123456789")) != -1) + switch (c) { + case '0': case '1': case '2': case '3': + case '4': case '5': case '6': case '7': + case '8': case '9': + dirnum = atoi(&argv[optind-1][1]); + break; + case 'd': + showdata++; + /* fall thru... */ + case 'D': + readdata++; + break; + case 'c': + flags |= TIFFPRINT_COLORMAP | TIFFPRINT_CURVES; + break; + case 'f': /* fill order */ + if (streq(optarg, "lsb2msb")) + order = FILLORDER_LSB2MSB; + else if (streq(optarg, "msb2lsb")) + order = FILLORDER_MSB2LSB; + else + usage(); + break; + case 'i': + stoponerr = 0; + break; + case 'o': + diroff = strtoul(optarg, NULL, 0); + break; + case 'j': + flags |= TIFFPRINT_JPEGQTABLES | + TIFFPRINT_JPEGACTABLES | + TIFFPRINT_JPEGDCTABLES; + break; + case 'r': + rawdata = 1; + break; + case 's': + flags |= TIFFPRINT_STRIPS; + break; + case 'w': + showwords = 1; + break; + case 'z': + chopstrips = 1; + break; + case '?': + usage(); + /*NOTREACHED*/ + } + if (optind >= argc) + usage(); + + old_error_handler = TIFFSetErrorHandler(PrivateErrorHandler); + + multiplefiles = (argc - optind > 1); + for (; optind < argc; optind++) { + if (multiplefiles) + printf("%s:\n", argv[optind]); + tif = TIFFOpen(argv[optind], chopstrips ? "rC" : "rc"); + if (tif != NULL) { + if (dirnum != -1) { + if (TIFFSetDirectory(tif, (tdir_t) dirnum)) + tiffinfo(tif, order, flags, 1); + } else if (diroff != 0) { + if (TIFFSetSubDirectory(tif, diroff)) + tiffinfo(tif, order, flags, 1); + } else { + do { + toff_t offset; + + tiffinfo(tif, order, flags, 1); + if (TIFFGetField(tif, TIFFTAG_EXIFIFD, + &offset)) { + if (TIFFReadEXIFDirectory(tif, offset)) { + tiffinfo(tif, order, flags, 0); + } + } + } while (TIFFReadDirectory(tif)); + } + TIFFClose(tif); + } + } + return (status); +} + +char* stuff[] = { +"usage: tiffinfo [options] input...", +"where options are:", +" -D read data", +" -i ignore read errors", +" -c display data for grey/color response curve or colormap", +" -d display raw/decoded image data", +" -f lsb2msb force lsb-to-msb FillOrder for input", +" -f msb2lsb force msb-to-lsb FillOrder for input", +" -j show JPEG tables", +" -o offset set initial directory offset", +" -r read/display raw image data instead of decoded data", +" -s display strip offsets and byte counts", +" -w display raw data in words rather than bytes", +" -z enable strip chopping", +" -# set initial directory (first directory is # 0)", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +static void +ShowStrip(tstrip_t strip, unsigned char* pp, uint32 nrow, tsize_t scanline) +{ + register tsize_t cc; + + printf("Strip %lu:\n", (unsigned long) strip); + while (nrow-- > 0) { + for (cc = 0; cc < scanline; cc++) { + printf(" %02x", *pp++); + if (((cc+1) % 24) == 0) + putchar('\n'); + } + putchar('\n'); + } +} + +void +TIFFReadContigStripData(TIFF* tif) +{ + unsigned char *buf; + tsize_t scanline = TIFFScanlineSize(tif); + + buf = (unsigned char *)_TIFFmalloc(TIFFStripSize(tif)); + if (buf) { + uint32 row, h=0; + uint32 rowsperstrip = (uint32)-1; + + TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &h); + TIFFGetField(tif, TIFFTAG_ROWSPERSTRIP, &rowsperstrip); + for (row = 0; row < h; row += rowsperstrip) { + uint32 nrow = (row+rowsperstrip > h ? + h-row : rowsperstrip); + tstrip_t strip = TIFFComputeStrip(tif, row, 0); + if (TIFFReadEncodedStrip(tif, strip, buf, nrow*scanline) < 0) { + if (stoponerr) + break; + } else if (showdata) + ShowStrip(strip, buf, nrow, scanline); + } + _TIFFfree(buf); + } +} + +void +TIFFReadSeparateStripData(TIFF* tif) +{ + unsigned char *buf; + tsize_t scanline = TIFFScanlineSize(tif); + + buf = (unsigned char *)_TIFFmalloc(TIFFStripSize(tif)); + if (buf) { + uint32 row, h; + uint32 rowsperstrip = (uint32)-1; + tsample_t s, samplesperpixel; + + TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &h); + TIFFGetField(tif, TIFFTAG_ROWSPERSTRIP, &rowsperstrip); + TIFFGetField(tif, TIFFTAG_SAMPLESPERPIXEL, &samplesperpixel); + for (row = 0; row < h; row += rowsperstrip) { + for (s = 0; s < samplesperpixel; s++) { + uint32 nrow = (row+rowsperstrip > h ? + h-row : rowsperstrip); + tstrip_t strip = TIFFComputeStrip(tif, row, s); + if (TIFFReadEncodedStrip(tif, strip, buf, nrow*scanline) < 0) { + if (stoponerr) + break; + } else if (showdata) + ShowStrip(strip, buf, nrow, scanline); + } + } + _TIFFfree(buf); + } +} + +static void +ShowTile(uint32 row, uint32 col, tsample_t sample, + unsigned char* pp, uint32 nrow, tsize_t rowsize) +{ + uint32 cc; + + printf("Tile (%lu,%lu", (unsigned long) row, (unsigned long) col); + if (sample != (tsample_t) -1) + printf(",%u", sample); + printf("):\n"); + while (nrow-- > 0) { + for (cc = 0; cc < (uint32) rowsize; cc++) { + printf(" %02x", *pp++); + if (((cc+1) % 24) == 0) + putchar('\n'); + } + putchar('\n'); + } +} + +void +TIFFReadContigTileData(TIFF* tif) +{ + unsigned char *buf; + tsize_t rowsize = TIFFTileRowSize(tif); + + buf = (unsigned char *)_TIFFmalloc(TIFFTileSize(tif)); + if (buf) { + uint32 tw, th, w, h; + uint32 row, col; + + TIFFGetField(tif, TIFFTAG_IMAGEWIDTH, &w); + TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &h); + TIFFGetField(tif, TIFFTAG_TILEWIDTH, &tw); + TIFFGetField(tif, TIFFTAG_TILELENGTH, &th); + for (row = 0; row < h; row += th) { + for (col = 0; col < w; col += tw) { + if (TIFFReadTile(tif, buf, col, row, 0, 0) < 0) { + if (stoponerr) + break; + } else if (showdata) + ShowTile(row, col, (tsample_t) -1, buf, th, rowsize); + } + } + _TIFFfree(buf); + } +} + +void +TIFFReadSeparateTileData(TIFF* tif) +{ + unsigned char *buf; + tsize_t rowsize = TIFFTileRowSize(tif); + + buf = (unsigned char *)_TIFFmalloc(TIFFTileSize(tif)); + if (buf) { + uint32 tw, th, w, h; + uint32 row, col; + tsample_t s, samplesperpixel; + + TIFFGetField(tif, TIFFTAG_IMAGEWIDTH, &w); + TIFFGetField(tif, TIFFTAG_IMAGELENGTH, &h); + TIFFGetField(tif, TIFFTAG_TILEWIDTH, &tw); + TIFFGetField(tif, TIFFTAG_TILELENGTH, &th); + TIFFGetField(tif, TIFFTAG_SAMPLESPERPIXEL, &samplesperpixel); + for (row = 0; row < h; row += th) { + for (col = 0; col < w; col += tw) { + for (s = 0; s < samplesperpixel; s++) { + if (TIFFReadTile(tif, buf, col, row, 0, s) < 0) { + if (stoponerr) + break; + } else if (showdata) + ShowTile(row, col, s, buf, th, rowsize); + } + } + } + _TIFFfree(buf); + } +} + +void +TIFFReadData(TIFF* tif) +{ + uint16 config = PLANARCONFIG_CONTIG; + + TIFFGetField(tif, TIFFTAG_PLANARCONFIG, &config); + if (TIFFIsTiled(tif)) { + if (config == PLANARCONFIG_CONTIG) + TIFFReadContigTileData(tif); + else + TIFFReadSeparateTileData(tif); + } else { + if (config == PLANARCONFIG_CONTIG) + TIFFReadContigStripData(tif); + else + TIFFReadSeparateStripData(tif); + } +} + +static void +ShowRawBytes(unsigned char* pp, uint32 n) +{ + uint32 i; + + for (i = 0; i < n; i++) { + printf(" %02x", *pp++); + if (((i+1) % 24) == 0) + printf("\n "); + } + putchar('\n'); +} + +static void +ShowRawWords(uint16* pp, uint32 n) +{ + uint32 i; + + for (i = 0; i < n; i++) { + printf(" %04x", *pp++); + if (((i+1) % 15) == 0) + printf("\n "); + } + putchar('\n'); +} + +void +TIFFReadRawData(TIFF* tif, int bitrev) +{ + tstrip_t nstrips = TIFFNumberOfStrips(tif); + const char* what = TIFFIsTiled(tif) ? "Tile" : "Strip"; + uint64* stripbc; + + TIFFGetField(tif, TIFFTAG_STRIPBYTECOUNTS, &stripbc); + if (nstrips > 0) { + uint32 bufsize = (uint32) stripbc[0]; + tdata_t buf = _TIFFmalloc(bufsize); + tstrip_t s; + + for (s = 0; s < nstrips; s++) { + if (stripbc[s] > bufsize) { + buf = _TIFFrealloc(buf, (tmsize_t)stripbc[s]); + bufsize = (uint32) stripbc[s]; + } + if (buf == NULL) { + fprintf(stderr, + "Cannot allocate buffer to read strip %lu\n", + (unsigned long) s); + break; + } + if (TIFFReadRawStrip(tif, s, buf, (tmsize_t) stripbc[s]) < 0) { + fprintf(stderr, "Error reading strip %lu\n", + (unsigned long) s); + if (stoponerr) + break; + } else if (showdata) { + if (bitrev) { + TIFFReverseBits(buf, (tmsize_t)stripbc[s]); + printf("%s %lu: (bit reversed)\n ", + what, (unsigned long) s); + } else + printf("%s %lu:\n ", what, + (unsigned long) s); + if (showwords) + ShowRawWords((uint16*) buf, (uint32) stripbc[s]>>1); + else + ShowRawBytes((unsigned char*) buf, (uint32) stripbc[s]); + } + } + if (buf != NULL) + _TIFFfree(buf); + } +} + +static void +tiffinfo(TIFF* tif, uint16 order, long flags, int is_image) +{ + TIFFPrintDirectory(tif, stdout, flags); + if (!readdata || !is_image) + return; + if (rawdata) { + if (order) { + uint16 o; + TIFFGetFieldDefaulted(tif, + TIFFTAG_FILLORDER, &o); + TIFFReadRawData(tif, o != order); + } else + TIFFReadRawData(tif, 0); + } else { + if (order) + TIFFSetField(tif, TIFFTAG_FILLORDER, order); + TIFFReadData(tif); + } +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiffmedian.c b/src/SDL2/external/tiff-4.0.3/tools/tiffmedian.c new file mode 100644 index 000000000..6501494b8 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiffmedian.c @@ -0,0 +1,906 @@ +/* $Id: tiffmedian.c,v 1.10 2010-03-10 18:56:50 bfriesen Exp $ */ + +/* + * Apply median cut on an image. + * + * tiffmedian [-c n] [-f] input output + * -C n - set colortable size. Default is 256. + * -f - use Floyd-Steinberg dithering. + * -c lzw - compress output with LZW + * -c none - use no compression on output + * -c packbits - use packbits compression on output + * -r n - create output with n rows/strip of data + * (by default the compression scheme and rows/strip are taken + * from the input file) + * + * Notes: + * + * [1] Floyd-Steinberg dither: + * I should point out that the actual fractions we used were, assuming + * you are at X, moving left to right: + * + * X 7/16 + * 3/16 5/16 1/16 + * + * Note that the error goes to four neighbors, not three. I think this + * will probably do better (at least for black and white) than the + * 3/8-3/8-1/4 distribution, at the cost of greater processing. I have + * seen the 3/8-3/8-1/4 distribution described as "our" algorithm before, + * but I have no idea who the credit really belongs to. + + * Also, I should add that if you do zig-zag scanning (see my immediately + * previous message), it is sufficient (but not quite as good) to send + * half the error one pixel ahead (e.g. to the right on lines you scan + * left to right), and half one pixel straight down. Again, this is for + * black and white; I've not tried it with color. + * -- + * Lou Steinberg + * + * [2] Color Image Quantization for Frame Buffer Display, Paul Heckbert, + * Siggraph '82 proceedings, pp. 297-307 + */ + +#include "tif_config.h" + +#include +#include +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#ifdef NEED_LIBPORT +# include "libport.h" +#endif + +#include "tiffio.h" + +#define MAX_CMAP_SIZE 256 + +#define streq(a,b) (strcmp(a,b) == 0) +#define strneq(a,b,n) (strncmp(a,b,n) == 0) + +#define COLOR_DEPTH 8 +#define MAX_COLOR 256 + +#define B_DEPTH 5 /* # bits/pixel to use */ +#define B_LEN (1L< MAX_CMAP_SIZE) { + fprintf(stderr, + "-c: colormap too big, max %d\n", + MAX_CMAP_SIZE); + usage(); + } + break; + case 'f': /* dither */ + dither = 1; + break; + case 'r': /* rows/strip */ + rowsperstrip = atoi(optarg); + break; + case '?': + usage(); + /*NOTREACHED*/ + } + if (argc - optind != 2) + usage(); + in = TIFFOpen(argv[optind], "r"); + if (in == NULL) + return (-1); + TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &imagewidth); + TIFFGetField(in, TIFFTAG_IMAGELENGTH, &imagelength); + TIFFGetField(in, TIFFTAG_BITSPERSAMPLE, &bitspersample); + TIFFGetField(in, TIFFTAG_SAMPLESPERPIXEL, &samplesperpixel); + if (bitspersample != 8 && bitspersample != 16) { + fprintf(stderr, "%s: Image must have at least 8-bits/sample\n", + argv[optind]); + return (-3); + } + if (!TIFFGetField(in, TIFFTAG_PHOTOMETRIC, &photometric) || + photometric != PHOTOMETRIC_RGB || samplesperpixel < 3) { + fprintf(stderr, "%s: Image must have RGB data\n", argv[optind]); + return (-4); + } + TIFFGetField(in, TIFFTAG_PLANARCONFIG, &config); + if (config != PLANARCONFIG_CONTIG) { + fprintf(stderr, "%s: Can only handle contiguous data packing\n", + argv[optind]); + return (-5); + } + + /* + * STEP 1: create empty boxes + */ + usedboxes = NULL; + box_list = freeboxes = (Colorbox *)_TIFFmalloc(num_colors*sizeof (Colorbox)); + freeboxes[0].next = &freeboxes[1]; + freeboxes[0].prev = NULL; + for (i = 1; i < num_colors-1; ++i) { + freeboxes[i].next = &freeboxes[i+1]; + freeboxes[i].prev = &freeboxes[i-1]; + } + freeboxes[num_colors-1].next = NULL; + freeboxes[num_colors-1].prev = &freeboxes[num_colors-2]; + + /* + * STEP 2: get histogram, initialize first box + */ + ptr = freeboxes; + freeboxes = ptr->next; + if (freeboxes) + freeboxes->prev = NULL; + ptr->next = usedboxes; + usedboxes = ptr; + if (ptr->next) + ptr->next->prev = ptr; + get_histogram(in, ptr); + + /* + * STEP 3: continually subdivide boxes until no more free + * boxes remain or until all colors assigned. + */ + while (freeboxes != NULL) { + ptr = largest_box(); + if (ptr != NULL) + splitbox(ptr); + else + freeboxes = NULL; + } + + /* + * STEP 4: assign colors to all boxes + */ + for (i = 0, ptr = usedboxes; ptr != NULL; ++i, ptr = ptr->next) { + rm[i] = ((ptr->rmin + ptr->rmax) << COLOR_SHIFT) / 2; + gm[i] = ((ptr->gmin + ptr->gmax) << COLOR_SHIFT) / 2; + bm[i] = ((ptr->bmin + ptr->bmax) << COLOR_SHIFT) / 2; + } + + /* We're done with the boxes now */ + _TIFFfree(box_list); + freeboxes = usedboxes = NULL; + + /* + * STEP 5: scan histogram and map all values to closest color + */ + /* 5a: create cell list as described in Heckbert[2] */ + ColorCells = (C_cell **)_TIFFmalloc(C_LEN*C_LEN*C_LEN*sizeof (C_cell*)); + _TIFFmemset(ColorCells, 0, C_LEN*C_LEN*C_LEN*sizeof (C_cell*)); + /* 5b: create mapping from truncated pixel space to color + table entries */ + map_colortable(); + + /* + * STEP 6: scan image, match input values to table entries + */ + out = TIFFOpen(argv[optind+1], "w"); + if (out == NULL) + return (-2); + + CopyField(TIFFTAG_SUBFILETYPE, longv); + CopyField(TIFFTAG_IMAGEWIDTH, longv); + TIFFSetField(out, TIFFTAG_BITSPERSAMPLE, (short)COLOR_DEPTH); + if (compression != (uint16)-1) { + TIFFSetField(out, TIFFTAG_COMPRESSION, compression); + switch (compression) { + case COMPRESSION_LZW: + case COMPRESSION_DEFLATE: + if (predictor != 0) + TIFFSetField(out, TIFFTAG_PREDICTOR, predictor); + break; + } + } else + CopyField(TIFFTAG_COMPRESSION, compression); + TIFFSetField(out, TIFFTAG_PHOTOMETRIC, (short)PHOTOMETRIC_PALETTE); + CopyField(TIFFTAG_ORIENTATION, shortv); + TIFFSetField(out, TIFFTAG_SAMPLESPERPIXEL, (short)1); + CopyField(TIFFTAG_PLANARCONFIG, shortv); + TIFFSetField(out, TIFFTAG_ROWSPERSTRIP, + TIFFDefaultStripSize(out, rowsperstrip)); + CopyField(TIFFTAG_MINSAMPLEVALUE, shortv); + CopyField(TIFFTAG_MAXSAMPLEVALUE, shortv); + CopyField(TIFFTAG_RESOLUTIONUNIT, shortv); + CopyField(TIFFTAG_XRESOLUTION, floatv); + CopyField(TIFFTAG_YRESOLUTION, floatv); + CopyField(TIFFTAG_XPOSITION, floatv); + CopyField(TIFFTAG_YPOSITION, floatv); + + if (dither) + quant_fsdither(in, out); + else + quant(in, out); + /* + * Scale colormap to TIFF-required 16-bit values. + */ +#define SCALE(x) (((x)*((1L<<16)-1))/255) + for (i = 0; i < MAX_CMAP_SIZE; ++i) { + rm[i] = SCALE(rm[i]); + gm[i] = SCALE(gm[i]); + bm[i] = SCALE(bm[i]); + } + TIFFSetField(out, TIFFTAG_COLORMAP, rm, gm, bm); + (void) TIFFClose(out); + return (0); +} + +static int +processCompressOptions(char* opt) +{ + if (streq(opt, "none")) + compression = COMPRESSION_NONE; + else if (streq(opt, "packbits")) + compression = COMPRESSION_PACKBITS; + else if (strneq(opt, "lzw", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_LZW; + } else if (strneq(opt, "zip", 3)) { + char* cp = strchr(opt, ':'); + if (cp) + predictor = atoi(cp+1); + compression = COMPRESSION_DEFLATE; + } else + return (0); + return (1); +} + +char* stuff[] = { +"usage: tiffmedian [options] input.tif output.tif", +"where options are:", +" -r # make each strip have no more than # rows", +" -C # create a colormap with # entries", +" -f use Floyd-Steinberg dithering", +" -c lzw[:opts] compress output with Lempel-Ziv & Welch encoding", +" -c zip[:opts] compress output with deflate encoding", +" -c packbits compress output with packbits encoding", +" -c none use no compression algorithm on output", +"", +"LZW and deflate options:", +" # set predictor value", +"For example, -c lzw:2 to get LZW-encoded data with horizontal differencing", +NULL +}; + +static void +usage(void) +{ + char buf[BUFSIZ]; + int i; + + setbuf(stderr, buf); + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + for (i = 0; stuff[i] != NULL; i++) + fprintf(stderr, "%s\n", stuff[i]); + exit(-1); +} + +static void +get_histogram(TIFF* in, Colorbox* box) +{ + register unsigned char *inptr; + register int red, green, blue; + register uint32 j, i; + unsigned char *inputline; + + inputline = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(in)); + if (inputline == NULL) { + fprintf(stderr, "No space for scanline buffer\n"); + exit(-1); + } + box->rmin = box->gmin = box->bmin = 999; + box->rmax = box->gmax = box->bmax = -1; + box->total = imagewidth * imagelength; + + { register uint32 *ptr = &histogram[0][0][0]; + for (i = B_LEN*B_LEN*B_LEN; i-- > 0;) + *ptr++ = 0; + } + for (i = 0; i < imagelength; i++) { + if (TIFFReadScanline(in, inputline, i, 0) <= 0) + break; + inptr = inputline; + for (j = imagewidth; j-- > 0;) { + red = *inptr++ >> COLOR_SHIFT; + green = *inptr++ >> COLOR_SHIFT; + blue = *inptr++ >> COLOR_SHIFT; + if (red < box->rmin) + box->rmin = red; + if (red > box->rmax) + box->rmax = red; + if (green < box->gmin) + box->gmin = green; + if (green > box->gmax) + box->gmax = green; + if (blue < box->bmin) + box->bmin = blue; + if (blue > box->bmax) + box->bmax = blue; + histogram[red][green][blue]++; + } + } + _TIFFfree(inputline); +} + +static Colorbox * +largest_box(void) +{ + register Colorbox *p, *b; + register uint32 size; + + b = NULL; + size = 0; + for (p = usedboxes; p != NULL; p = p->next) + if ((p->rmax > p->rmin || p->gmax > p->gmin || + p->bmax > p->bmin) && p->total > size) + size = (b = p)->total; + return (b); +} + +static void +splitbox(Colorbox* ptr) +{ + uint32 hist2[B_LEN]; + int first=0, last=0; + register Colorbox *new; + register uint32 *iptr, *histp; + register int i, j; + register int ir,ig,ib; + register uint32 sum, sum1, sum2; + enum { RED, GREEN, BLUE } axis; + + /* + * See which axis is the largest, do a histogram along that + * axis. Split at median point. Contract both new boxes to + * fit points and return + */ + i = ptr->rmax - ptr->rmin; + if (i >= ptr->gmax - ptr->gmin && i >= ptr->bmax - ptr->bmin) + axis = RED; + else if (ptr->gmax - ptr->gmin >= ptr->bmax - ptr->bmin) + axis = GREEN; + else + axis = BLUE; + /* get histogram along longest axis */ + switch (axis) { + case RED: + histp = &hist2[ptr->rmin]; + for (ir = ptr->rmin; ir <= ptr->rmax; ++ir) { + *histp = 0; + for (ig = ptr->gmin; ig <= ptr->gmax; ++ig) { + iptr = &histogram[ir][ig][ptr->bmin]; + for (ib = ptr->bmin; ib <= ptr->bmax; ++ib) + *histp += *iptr++; + } + histp++; + } + first = ptr->rmin; + last = ptr->rmax; + break; + case GREEN: + histp = &hist2[ptr->gmin]; + for (ig = ptr->gmin; ig <= ptr->gmax; ++ig) { + *histp = 0; + for (ir = ptr->rmin; ir <= ptr->rmax; ++ir) { + iptr = &histogram[ir][ig][ptr->bmin]; + for (ib = ptr->bmin; ib <= ptr->bmax; ++ib) + *histp += *iptr++; + } + histp++; + } + first = ptr->gmin; + last = ptr->gmax; + break; + case BLUE: + histp = &hist2[ptr->bmin]; + for (ib = ptr->bmin; ib <= ptr->bmax; ++ib) { + *histp = 0; + for (ir = ptr->rmin; ir <= ptr->rmax; ++ir) { + iptr = &histogram[ir][ptr->gmin][ib]; + for (ig = ptr->gmin; ig <= ptr->gmax; ++ig) { + *histp += *iptr; + iptr += B_LEN; + } + } + histp++; + } + first = ptr->bmin; + last = ptr->bmax; + break; + } + /* find median point */ + sum2 = ptr->total / 2; + histp = &hist2[first]; + sum = 0; + for (i = first; i <= last && (sum += *histp++) < sum2; ++i) + ; + if (i == first) + i++; + + /* Create new box, re-allocate points */ + new = freeboxes; + freeboxes = new->next; + if (freeboxes) + freeboxes->prev = NULL; + if (usedboxes) + usedboxes->prev = new; + new->next = usedboxes; + usedboxes = new; + + histp = &hist2[first]; + for (sum1 = 0, j = first; j < i; j++) + sum1 += *histp++; + for (sum2 = 0, j = i; j <= last; j++) + sum2 += *histp++; + new->total = sum1; + ptr->total = sum2; + + new->rmin = ptr->rmin; + new->rmax = ptr->rmax; + new->gmin = ptr->gmin; + new->gmax = ptr->gmax; + new->bmin = ptr->bmin; + new->bmax = ptr->bmax; + switch (axis) { + case RED: + new->rmax = i-1; + ptr->rmin = i; + break; + case GREEN: + new->gmax = i-1; + ptr->gmin = i; + break; + case BLUE: + new->bmax = i-1; + ptr->bmin = i; + break; + } + shrinkbox(new); + shrinkbox(ptr); +} + +static void +shrinkbox(Colorbox* box) +{ + register uint32 *histp; + register int ir, ig, ib; + + if (box->rmax > box->rmin) { + for (ir = box->rmin; ir <= box->rmax; ++ir) + for (ig = box->gmin; ig <= box->gmax; ++ig) { + histp = &histogram[ir][ig][box->bmin]; + for (ib = box->bmin; ib <= box->bmax; ++ib) + if (*histp++ != 0) { + box->rmin = ir; + goto have_rmin; + } + } + have_rmin: + if (box->rmax > box->rmin) + for (ir = box->rmax; ir >= box->rmin; --ir) + for (ig = box->gmin; ig <= box->gmax; ++ig) { + histp = &histogram[ir][ig][box->bmin]; + ib = box->bmin; + for (; ib <= box->bmax; ++ib) + if (*histp++ != 0) { + box->rmax = ir; + goto have_rmax; + } + } + } +have_rmax: + if (box->gmax > box->gmin) { + for (ig = box->gmin; ig <= box->gmax; ++ig) + for (ir = box->rmin; ir <= box->rmax; ++ir) { + histp = &histogram[ir][ig][box->bmin]; + for (ib = box->bmin; ib <= box->bmax; ++ib) + if (*histp++ != 0) { + box->gmin = ig; + goto have_gmin; + } + } + have_gmin: + if (box->gmax > box->gmin) + for (ig = box->gmax; ig >= box->gmin; --ig) + for (ir = box->rmin; ir <= box->rmax; ++ir) { + histp = &histogram[ir][ig][box->bmin]; + ib = box->bmin; + for (; ib <= box->bmax; ++ib) + if (*histp++ != 0) { + box->gmax = ig; + goto have_gmax; + } + } + } +have_gmax: + if (box->bmax > box->bmin) { + for (ib = box->bmin; ib <= box->bmax; ++ib) + for (ir = box->rmin; ir <= box->rmax; ++ir) { + histp = &histogram[ir][box->gmin][ib]; + for (ig = box->gmin; ig <= box->gmax; ++ig) { + if (*histp != 0) { + box->bmin = ib; + goto have_bmin; + } + histp += B_LEN; + } + } + have_bmin: + if (box->bmax > box->bmin) + for (ib = box->bmax; ib >= box->bmin; --ib) + for (ir = box->rmin; ir <= box->rmax; ++ir) { + histp = &histogram[ir][box->gmin][ib]; + ig = box->gmin; + for (; ig <= box->gmax; ++ig) { + if (*histp != 0) { + box->bmax = ib; + goto have_bmax; + } + histp += B_LEN; + } + } + } +have_bmax: + ; +} + +static C_cell * +create_colorcell(int red, int green, int blue) +{ + register int ir, ig, ib, i; + register C_cell *ptr; + int mindist, next_n; + register int tmp, dist, n; + + ir = red >> (COLOR_DEPTH-C_DEPTH); + ig = green >> (COLOR_DEPTH-C_DEPTH); + ib = blue >> (COLOR_DEPTH-C_DEPTH); + ptr = (C_cell *)_TIFFmalloc(sizeof (C_cell)); + *(ColorCells + ir*C_LEN*C_LEN + ig*C_LEN + ib) = ptr; + ptr->num_ents = 0; + + /* + * Step 1: find all colors inside this cell, while we're at + * it, find distance of centermost point to furthest corner + */ + mindist = 99999999; + for (i = 0; i < num_colors; ++i) { + if (rm[i]>>(COLOR_DEPTH-C_DEPTH) != ir || + gm[i]>>(COLOR_DEPTH-C_DEPTH) != ig || + bm[i]>>(COLOR_DEPTH-C_DEPTH) != ib) + continue; + ptr->entries[ptr->num_ents][0] = i; + ptr->entries[ptr->num_ents][1] = 0; + ++ptr->num_ents; + tmp = rm[i] - red; + if (tmp < (MAX_COLOR/C_LEN/2)) + tmp = MAX_COLOR/C_LEN-1 - tmp; + dist = tmp*tmp; + tmp = gm[i] - green; + if (tmp < (MAX_COLOR/C_LEN/2)) + tmp = MAX_COLOR/C_LEN-1 - tmp; + dist += tmp*tmp; + tmp = bm[i] - blue; + if (tmp < (MAX_COLOR/C_LEN/2)) + tmp = MAX_COLOR/C_LEN-1 - tmp; + dist += tmp*tmp; + if (dist < mindist) + mindist = dist; + } + + /* + * Step 3: find all points within that distance to cell. + */ + for (i = 0; i < num_colors; ++i) { + if (rm[i] >> (COLOR_DEPTH-C_DEPTH) == ir && + gm[i] >> (COLOR_DEPTH-C_DEPTH) == ig && + bm[i] >> (COLOR_DEPTH-C_DEPTH) == ib) + continue; + dist = 0; + if ((tmp = red - rm[i]) > 0 || + (tmp = rm[i] - (red + MAX_COLOR/C_LEN-1)) > 0 ) + dist += tmp*tmp; + if ((tmp = green - gm[i]) > 0 || + (tmp = gm[i] - (green + MAX_COLOR/C_LEN-1)) > 0 ) + dist += tmp*tmp; + if ((tmp = blue - bm[i]) > 0 || + (tmp = bm[i] - (blue + MAX_COLOR/C_LEN-1)) > 0 ) + dist += tmp*tmp; + if (dist < mindist) { + ptr->entries[ptr->num_ents][0] = i; + ptr->entries[ptr->num_ents][1] = dist; + ++ptr->num_ents; + } + } + + /* + * Sort color cells by distance, use cheap exchange sort + */ + for (n = ptr->num_ents - 1; n > 0; n = next_n) { + next_n = 0; + for (i = 0; i < n; ++i) + if (ptr->entries[i][1] > ptr->entries[i+1][1]) { + tmp = ptr->entries[i][0]; + ptr->entries[i][0] = ptr->entries[i+1][0]; + ptr->entries[i+1][0] = tmp; + tmp = ptr->entries[i][1]; + ptr->entries[i][1] = ptr->entries[i+1][1]; + ptr->entries[i+1][1] = tmp; + next_n = i; + } + } + return (ptr); +} + +static void +map_colortable(void) +{ + register uint32 *histp = &histogram[0][0][0]; + register C_cell *cell; + register int j, tmp, d2, dist; + int ir, ig, ib, i; + + for (ir = 0; ir < B_LEN; ++ir) + for (ig = 0; ig < B_LEN; ++ig) + for (ib = 0; ib < B_LEN; ++ib, histp++) { + if (*histp == 0) { + *histp = -1; + continue; + } + cell = *(ColorCells + + (((ir>>(B_DEPTH-C_DEPTH)) << C_DEPTH*2) + + ((ig>>(B_DEPTH-C_DEPTH)) << C_DEPTH) + + (ib>>(B_DEPTH-C_DEPTH)))); + if (cell == NULL ) + cell = create_colorcell( + ir << COLOR_SHIFT, + ig << COLOR_SHIFT, + ib << COLOR_SHIFT); + dist = 9999999; + for (i = 0; i < cell->num_ents && + dist > cell->entries[i][1]; ++i) { + j = cell->entries[i][0]; + d2 = rm[j] - (ir << COLOR_SHIFT); + d2 *= d2; + tmp = gm[j] - (ig << COLOR_SHIFT); + d2 += tmp*tmp; + tmp = bm[j] - (ib << COLOR_SHIFT); + d2 += tmp*tmp; + if (d2 < dist) { + dist = d2; + *histp = j; + } + } + } +} + +/* + * straight quantization. Each pixel is mapped to the colors + * closest to it. Color values are rounded to the nearest color + * table entry. + */ +static void +quant(TIFF* in, TIFF* out) +{ + unsigned char *outline, *inputline; + register unsigned char *outptr, *inptr; + register uint32 i, j; + register int red, green, blue; + + inputline = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(in)); + outline = (unsigned char *)_TIFFmalloc(imagewidth); + for (i = 0; i < imagelength; i++) { + if (TIFFReadScanline(in, inputline, i, 0) <= 0) + break; + inptr = inputline; + outptr = outline; + for (j = 0; j < imagewidth; j++) { + red = *inptr++ >> COLOR_SHIFT; + green = *inptr++ >> COLOR_SHIFT; + blue = *inptr++ >> COLOR_SHIFT; + *outptr++ = (unsigned char)histogram[red][green][blue]; + } + if (TIFFWriteScanline(out, outline, i, 0) < 0) + break; + } + _TIFFfree(inputline); + _TIFFfree(outline); +} + +#define SWAP(type,a,b) { type p; p = a; a = b; b = p; } + +#define GetInputLine(tif, row, bad) \ + if (TIFFReadScanline(tif, inputline, row, 0) <= 0) \ + bad; \ + inptr = inputline; \ + nextptr = nextline; \ + for (j = 0; j < imagewidth; ++j) { \ + *nextptr++ = *inptr++; \ + *nextptr++ = *inptr++; \ + *nextptr++ = *inptr++; \ + } +#define GetComponent(raw, cshift, c) \ + cshift = raw; \ + if (cshift < 0) \ + cshift = 0; \ + else if (cshift >= MAX_COLOR) \ + cshift = MAX_COLOR-1; \ + c = cshift; \ + cshift >>= COLOR_SHIFT; + +static void +quant_fsdither(TIFF* in, TIFF* out) +{ + unsigned char *outline, *inputline, *inptr; + short *thisline, *nextline; + register unsigned char *outptr; + register short *thisptr, *nextptr; + register uint32 i, j; + uint32 imax, jmax; + int lastline, lastpixel; + + imax = imagelength - 1; + jmax = imagewidth - 1; + inputline = (unsigned char *)_TIFFmalloc(TIFFScanlineSize(in)); + thisline = (short *)_TIFFmalloc(imagewidth * 3 * sizeof (short)); + nextline = (short *)_TIFFmalloc(imagewidth * 3 * sizeof (short)); + outline = (unsigned char *) _TIFFmalloc(TIFFScanlineSize(out)); + + GetInputLine(in, 0, goto bad); /* get first line */ + for (i = 1; i <= imagelength; ++i) { + SWAP(short *, thisline, nextline); + lastline = (i >= imax); + if (i <= imax) + GetInputLine(in, i, break); + thisptr = thisline; + nextptr = nextline; + outptr = outline; + for (j = 0; j < imagewidth; ++j) { + int red, green, blue; + register int oval, r2, g2, b2; + + lastpixel = (j == jmax); + GetComponent(*thisptr++, r2, red); + GetComponent(*thisptr++, g2, green); + GetComponent(*thisptr++, b2, blue); + oval = histogram[r2][g2][b2]; + if (oval == -1) { + int ci; + register int cj, tmp, d2, dist; + register C_cell *cell; + + cell = *(ColorCells + + (((r2>>(B_DEPTH-C_DEPTH)) << C_DEPTH*2) + + ((g2>>(B_DEPTH-C_DEPTH)) << C_DEPTH ) + + (b2>>(B_DEPTH-C_DEPTH)))); + if (cell == NULL) + cell = create_colorcell(red, + green, blue); + dist = 9999999; + for (ci = 0; ci < cell->num_ents && dist > cell->entries[ci][1]; ++ci) { + cj = cell->entries[ci][0]; + d2 = (rm[cj] >> COLOR_SHIFT) - r2; + d2 *= d2; + tmp = (gm[cj] >> COLOR_SHIFT) - g2; + d2 += tmp*tmp; + tmp = (bm[cj] >> COLOR_SHIFT) - b2; + d2 += tmp*tmp; + if (d2 < dist) { + dist = d2; + oval = cj; + } + } + histogram[r2][g2][b2] = oval; + } + *outptr++ = oval; + red -= rm[oval]; + green -= gm[oval]; + blue -= bm[oval]; + if (!lastpixel) { + thisptr[0] += blue * 7 / 16; + thisptr[1] += green * 7 / 16; + thisptr[2] += red * 7 / 16; + } + if (!lastline) { + if (j != 0) { + nextptr[-3] += blue * 3 / 16; + nextptr[-2] += green * 3 / 16; + nextptr[-1] += red * 3 / 16; + } + nextptr[0] += blue * 5 / 16; + nextptr[1] += green * 5 / 16; + nextptr[2] += red * 5 / 16; + if (!lastpixel) { + nextptr[3] += blue / 16; + nextptr[4] += green / 16; + nextptr[5] += red / 16; + } + nextptr += 3; + } + } + if (TIFFWriteScanline(out, outline, i-1, 0) < 0) + break; + } +bad: + _TIFFfree(inputline); + _TIFFfree(thisline); + _TIFFfree(nextline); + _TIFFfree(outline); +} +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiffset.c b/src/SDL2/external/tiff-4.0.3/tools/tiffset.c new file mode 100644 index 000000000..3b4b9f0ed --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiffset.c @@ -0,0 +1,340 @@ +/****************************************************************************** + * $Id: tiffset.c,v 1.17 2012-07-29 15:45:30 tgl Exp $ + * + * Project: libtiff tools + * Purpose: Mainline for setting metadata in existing TIFF files. + * Author: Frank Warmerdam, warmerdam@pobox.com + * + ****************************************************************************** + * Copyright (c) 2000, Frank Warmerdam + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + ****************************************************************************** + */ + + +#include +#include +#include + +#include "tiffio.h" + +static char* usageMsg[] = { +"usage: tiffset [options] filename", +"where options are:", +" -s [count] ... set the tag value", +" -d set the directory", +" -sd set the subdirectory", +" -sf read the tag value from file (for ASCII tags only)", +NULL +}; + +static void +usage(void) +{ + int i; + for (i = 0; usageMsg[i]; i++) + fprintf(stderr, "%s\n", usageMsg[i]); + exit(-1); +} + +static const TIFFField * +GetField(TIFF *tiff, const char *tagname) +{ + const TIFFField *fip; + + if( atoi(tagname) > 0 ) + fip = TIFFFieldWithTag(tiff, (ttag_t)atoi(tagname)); + else + fip = TIFFFieldWithName(tiff, tagname); + + if (!fip) { + fprintf( stderr, "Field name \"%s\" is not recognised.\n", tagname ); + return (TIFFField *)NULL; + } + + return fip; +} + +int +main(int argc, char* argv[]) +{ + TIFF *tiff; + int arg_index; + + if (argc < 2) + usage(); + + tiff = TIFFOpen(argv[argc-1], "r+"); + if (tiff == NULL) + return 2; + + for( arg_index = 1; arg_index < argc-1; arg_index++ ) { + if (strcmp(argv[arg_index],"-d") == 0 && arg_index < argc-2) { + arg_index++; + if( TIFFSetDirectory(tiff, atoi(argv[arg_index]) ) != 1 ) + { + fprintf( stderr, "Failed to set directory=%s\n", argv[arg_index] ); + return 6; + } + arg_index++; + } + if (strcmp(argv[arg_index],"-sd") == 0 && arg_index < argc-2) { + arg_index++; + if( TIFFSetSubDirectory(tiff, atoi(argv[arg_index]) ) != 1 ) + { + fprintf( stderr, "Failed to set sub directory=%s\n", argv[arg_index] ); + return 7; + } + arg_index++; + } + if (strcmp(argv[arg_index],"-s") == 0 && arg_index < argc-3) { + const TIFFField *fip; + const char *tagname; + + arg_index++; + tagname = argv[arg_index]; + fip = GetField(tiff, tagname); + + if (!fip) + return 3; + + arg_index++; + if (TIFFFieldDataType(fip) == TIFF_ASCII) { + if (TIFFSetField(tiff, TIFFFieldTag(fip), argv[arg_index]) != 1) + fprintf( stderr, "Failed to set %s=%s\n", + TIFFFieldName(fip), argv[arg_index] ); + } else if (TIFFFieldWriteCount(fip) > 0 + || TIFFFieldWriteCount(fip) == TIFF_VARIABLE) { + int ret = 1; + short wc; + + if (TIFFFieldWriteCount(fip) == TIFF_VARIABLE) + wc = atoi(argv[arg_index++]); + else + wc = TIFFFieldWriteCount(fip); + + if (argc - arg_index < wc) { + fprintf( stderr, + "Number of tag values is not enough. " + "Expected %d values for %s tag, got %d\n", + wc, TIFFFieldName(fip), argc - arg_index); + return 4; + } + + if (wc > 1) { + int i, size; + void *array; + + switch (TIFFFieldDataType(fip)) { + /* + * XXX: We can't use TIFFDataWidth() + * to determine the space needed to store + * the value. For TIFF_RATIONAL values + * TIFFDataWidth() returns 8, but we use 4-byte + * float to represent rationals. + */ + case TIFF_BYTE: + case TIFF_ASCII: + case TIFF_SBYTE: + case TIFF_UNDEFINED: + default: + size = 1; + break; + + case TIFF_SHORT: + case TIFF_SSHORT: + size = 2; + break; + + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_FLOAT: + case TIFF_IFD: + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + size = 4; + break; + + case TIFF_DOUBLE: + size = 8; + break; + } + + array = _TIFFmalloc(wc * size); + if (!array) { + fprintf(stderr, "No space for %s tag\n", + tagname); + return 4; + } + + switch (TIFFFieldDataType(fip)) { + case TIFF_BYTE: + for (i = 0; i < wc; i++) + ((uint8 *)array)[i] = atoi(argv[arg_index+i]); + break; + case TIFF_SHORT: + for (i = 0; i < wc; i++) + ((uint16 *)array)[i] = atoi(argv[arg_index+i]); + break; + case TIFF_SBYTE: + for (i = 0; i < wc; i++) + ((int8 *)array)[i] = atoi(argv[arg_index+i]); + break; + case TIFF_SSHORT: + for (i = 0; i < wc; i++) + ((int16 *)array)[i] = atoi(argv[arg_index+i]); + break; + case TIFF_LONG: + for (i = 0; i < wc; i++) + ((uint32 *)array)[i] = atol(argv[arg_index+i]); + break; + case TIFF_SLONG: + case TIFF_IFD: + for (i = 0; i < wc; i++) + ((uint32 *)array)[i] = atol(argv[arg_index+i]); + break; + case TIFF_DOUBLE: + for (i = 0; i < wc; i++) + ((double *)array)[i] = atof(argv[arg_index+i]); + break; + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_FLOAT: + for (i = 0; i < wc; i++) + ((float *)array)[i] = (float)atof(argv[arg_index+i]); + break; + default: + break; + } + + if (TIFFFieldPassCount(fip)) { + ret = TIFFSetField(tiff, TIFFFieldTag(fip), + wc, array); + } else if (TIFFFieldTag(fip) == TIFFTAG_PAGENUMBER + || TIFFFieldTag(fip) == TIFFTAG_HALFTONEHINTS + || TIFFFieldTag(fip) == TIFFTAG_YCBCRSUBSAMPLING + || TIFFFieldTag(fip) == TIFFTAG_DOTRANGE) { + if (TIFFFieldDataType(fip) == TIFF_BYTE) { + ret = TIFFSetField(tiff, TIFFFieldTag(fip), + ((uint8 *)array)[0], ((uint8 *)array)[1]); + } else if (TIFFFieldDataType(fip) == TIFF_SHORT) { + ret = TIFFSetField(tiff, TIFFFieldTag(fip), + ((uint16 *)array)[0], ((uint16 *)array)[1]); + } + } else { + ret = TIFFSetField(tiff, TIFFFieldTag(fip), + array); + } + + _TIFFfree(array); + } else { + switch (TIFFFieldDataType(fip)) { + case TIFF_BYTE: + case TIFF_SHORT: + case TIFF_SBYTE: + case TIFF_SSHORT: + ret = TIFFSetField(tiff, TIFFFieldTag(fip), + atoi(argv[arg_index++])); + break; + case TIFF_LONG: + case TIFF_SLONG: + case TIFF_IFD: + ret = TIFFSetField(tiff, TIFFFieldTag(fip), + atol(argv[arg_index++])); + break; + case TIFF_DOUBLE: + ret = TIFFSetField(tiff, TIFFFieldTag(fip), + atof(argv[arg_index++])); + break; + case TIFF_RATIONAL: + case TIFF_SRATIONAL: + case TIFF_FLOAT: + ret = TIFFSetField(tiff, TIFFFieldTag(fip), + (float)atof(argv[arg_index++])); + break; + default: + break; + } + } + + if (ret != 1) + fprintf(stderr, "Failed to set %s\n", TIFFFieldName(fip)); + arg_index += wc; + } + } else if (strcmp(argv[arg_index],"-sf") == 0 && arg_index < argc-3) { + FILE *fp; + const TIFFField *fip; + char *text; + size_t len; + + arg_index++; + fip = GetField(tiff, argv[arg_index]); + + if (!fip) + return 3; + + if (TIFFFieldDataType(fip) != TIFF_ASCII) { + fprintf( stderr, + "Only ASCII tags can be set from file. " + "%s is not ASCII tag.\n", TIFFFieldName(fip) ); + return 5; + } + + arg_index++; + fp = fopen( argv[arg_index], "rt" ); + if(fp == NULL) { + perror( argv[arg_index] ); + continue; + } + + text = (char *) malloc(1000000); + len = fread( text, 1, 999999, fp ); + text[len] = '\0'; + + fclose( fp ); + + if(TIFFSetField( tiff, TIFFFieldTag(fip), text ) != 1) { + fprintf(stderr, "Failed to set %s from file %s\n", + TIFFFieldName(fip), argv[arg_index]); + } + + _TIFFfree( text ); + arg_index++; + } else { + fprintf(stderr, "Unrecognised option: %s\n", + argv[arg_index]); + usage(); + } + } + + TIFFRewriteDirectory(tiff); + TIFFClose(tiff); + return 0; +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/tiffsplit.c b/src/SDL2/external/tiff-4.0.3/tools/tiffsplit.c new file mode 100644 index 000000000..fa43d63fa --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/tiffsplit.c @@ -0,0 +1,303 @@ +/* $Id: tiffsplit.c,v 1.22 2011-10-22 17:03:01 bfriesen Exp $ */ + +/* + * Copyright (c) 1992-1997 Sam Leffler + * Copyright (c) 1992-1997 Silicon Graphics, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and + * its documentation for any purpose is hereby granted without fee, provided + * that (i) the above copyright notices and this permission notice appear in + * all copies of the software and related documentation, and (ii) the names of + * Sam Leffler and Silicon Graphics may not be used in any advertising or + * publicity relating to the software without the specific, prior written + * permission of Sam Leffler and Silicon Graphics. + * + * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, + * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + * + * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR + * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, + * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, + * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF + * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include "tif_config.h" + +#include +#include +#include + +#include "tiffio.h" + +#ifndef HAVE_GETOPT +extern int getopt(int, char**, char*); +#endif + +#define CopyField(tag, v) \ + if (TIFFGetField(in, tag, &v)) TIFFSetField(out, tag, v) +#define CopyField2(tag, v1, v2) \ + if (TIFFGetField(in, tag, &v1, &v2)) TIFFSetField(out, tag, v1, v2) +#define CopyField3(tag, v1, v2, v3) \ + if (TIFFGetField(in, tag, &v1, &v2, &v3)) TIFFSetField(out, tag, v1, v2, v3) + +#define PATH_LENGTH 8192 + +static const char TIFF_SUFFIX[] = ".tif"; + +static char fname[PATH_LENGTH]; + +static int tiffcp(TIFF*, TIFF*); +static void newfilename(void); +static int cpStrips(TIFF*, TIFF*); +static int cpTiles(TIFF*, TIFF*); + +int +main(int argc, char* argv[]) +{ + TIFF *in, *out; + + if (argc < 2) { + fprintf(stderr, "%s\n\n", TIFFGetVersion()); + fprintf(stderr, "usage: tiffsplit input.tif [prefix]\n"); + return (-3); + } + if (argc > 2) { + strncpy(fname, argv[2], sizeof(fname)); + fname[sizeof(fname) - 1] = '\0'; + } + in = TIFFOpen(argv[1], "r"); + if (in != NULL) { + do { + size_t path_len; + char *path; + + newfilename(); + + path_len = strlen(fname) + sizeof(TIFF_SUFFIX); + path = (char *) _TIFFmalloc(path_len); + strncpy(path, fname, path_len); + path[path_len - 1] = '\0'; + strncat(path, TIFF_SUFFIX, path_len - strlen(path) - 1); + out = TIFFOpen(path, TIFFIsBigEndian(in)?"wb":"wl"); + _TIFFfree(path); + + if (out == NULL) + return (-2); + if (!tiffcp(in, out)) + return (-1); + TIFFClose(out); + } while (TIFFReadDirectory(in)); + (void) TIFFClose(in); + } + return (0); +} + +static void +newfilename(void) +{ + static int first = 1; + static long lastTurn; + static long fnum; + static short defname; + static char *fpnt; + + if (first) { + if (fname[0]) { + fpnt = fname + strlen(fname); + defname = 0; + } else { + fname[0] = 'x'; + fpnt = fname + 1; + defname = 1; + } + first = 0; + } +#define MAXFILES 17576 + if (fnum == MAXFILES) { + if (!defname || fname[0] == 'z') { + fprintf(stderr, "tiffsplit: too many files.\n"); + exit(1); + } + fname[0]++; + fnum = 0; + } + if (fnum % 676 == 0) { + if (fnum != 0) { + /* + * advance to next letter every 676 pages + * condition for 'z'++ will be covered above + */ + fpnt[0]++; + } else { + /* + * set to 'a' if we are on the very first file + */ + fpnt[0] = 'a'; + } + /* + * set the value of the last turning point + */ + lastTurn = fnum; + } + /* + * start from 0 every 676 times (provided by lastTurn) + * this keeps us within a-z boundaries + */ + fpnt[1] = (char)((fnum - lastTurn) / 26) + 'a'; + /* + * cycle last letter every file, from a-z, then repeat + */ + fpnt[2] = (char)(fnum % 26) + 'a'; + fnum++; +} + +static int +tiffcp(TIFF* in, TIFF* out) +{ + uint16 bitspersample, samplesperpixel, compression, shortv, *shortav; + uint32 w, l; + float floatv; + char *stringv; + uint32 longv; + + CopyField(TIFFTAG_SUBFILETYPE, longv); + CopyField(TIFFTAG_TILEWIDTH, w); + CopyField(TIFFTAG_TILELENGTH, l); + CopyField(TIFFTAG_IMAGEWIDTH, w); + CopyField(TIFFTAG_IMAGELENGTH, l); + CopyField(TIFFTAG_BITSPERSAMPLE, bitspersample); + CopyField(TIFFTAG_SAMPLESPERPIXEL, samplesperpixel); + CopyField(TIFFTAG_COMPRESSION, compression); + if (compression == COMPRESSION_JPEG) { + uint32 count = 0; + void *table = NULL; + if (TIFFGetField(in, TIFFTAG_JPEGTABLES, &count, &table) + && count > 0 && table) { + TIFFSetField(out, TIFFTAG_JPEGTABLES, count, table); + } + } + CopyField(TIFFTAG_PHOTOMETRIC, shortv); + CopyField(TIFFTAG_PREDICTOR, shortv); + CopyField(TIFFTAG_THRESHHOLDING, shortv); + CopyField(TIFFTAG_FILLORDER, shortv); + CopyField(TIFFTAG_ORIENTATION, shortv); + CopyField(TIFFTAG_MINSAMPLEVALUE, shortv); + CopyField(TIFFTAG_MAXSAMPLEVALUE, shortv); + CopyField(TIFFTAG_XRESOLUTION, floatv); + CopyField(TIFFTAG_YRESOLUTION, floatv); + CopyField(TIFFTAG_GROUP3OPTIONS, longv); + CopyField(TIFFTAG_GROUP4OPTIONS, longv); + CopyField(TIFFTAG_RESOLUTIONUNIT, shortv); + CopyField(TIFFTAG_PLANARCONFIG, shortv); + CopyField(TIFFTAG_ROWSPERSTRIP, longv); + CopyField(TIFFTAG_XPOSITION, floatv); + CopyField(TIFFTAG_YPOSITION, floatv); + CopyField(TIFFTAG_IMAGEDEPTH, longv); + CopyField(TIFFTAG_TILEDEPTH, longv); + CopyField(TIFFTAG_SAMPLEFORMAT, shortv); + CopyField2(TIFFTAG_EXTRASAMPLES, shortv, shortav); + { uint16 *red, *green, *blue; + CopyField3(TIFFTAG_COLORMAP, red, green, blue); + } + { uint16 shortv2; + CopyField2(TIFFTAG_PAGENUMBER, shortv, shortv2); + } + CopyField(TIFFTAG_ARTIST, stringv); + CopyField(TIFFTAG_IMAGEDESCRIPTION, stringv); + CopyField(TIFFTAG_MAKE, stringv); + CopyField(TIFFTAG_MODEL, stringv); + CopyField(TIFFTAG_SOFTWARE, stringv); + CopyField(TIFFTAG_DATETIME, stringv); + CopyField(TIFFTAG_HOSTCOMPUTER, stringv); + CopyField(TIFFTAG_PAGENAME, stringv); + CopyField(TIFFTAG_DOCUMENTNAME, stringv); + CopyField(TIFFTAG_BADFAXLINES, longv); + CopyField(TIFFTAG_CLEANFAXDATA, longv); + CopyField(TIFFTAG_CONSECUTIVEBADFAXLINES, longv); + CopyField(TIFFTAG_FAXRECVPARAMS, longv); + CopyField(TIFFTAG_FAXRECVTIME, longv); + CopyField(TIFFTAG_FAXSUBADDRESS, stringv); + CopyField(TIFFTAG_FAXDCS, stringv); + if (TIFFIsTiled(in)) + return (cpTiles(in, out)); + else + return (cpStrips(in, out)); +} + +static int +cpStrips(TIFF* in, TIFF* out) +{ + tmsize_t bufsize = TIFFStripSize(in); + unsigned char *buf = (unsigned char *)_TIFFmalloc(bufsize); + + if (buf) { + tstrip_t s, ns = TIFFNumberOfStrips(in); + uint64 *bytecounts; + + if (!TIFFGetField(in, TIFFTAG_STRIPBYTECOUNTS, &bytecounts)) { + fprintf(stderr, "tiffsplit: strip byte counts are missing\n"); + return (0); + } + for (s = 0; s < ns; s++) { + if (bytecounts[s] > (uint64)bufsize) { + buf = (unsigned char *)_TIFFrealloc(buf, (tmsize_t)bytecounts[s]); + if (!buf) + return (0); + bufsize = (tmsize_t)bytecounts[s]; + } + if (TIFFReadRawStrip(in, s, buf, (tmsize_t)bytecounts[s]) < 0 || + TIFFWriteRawStrip(out, s, buf, (tmsize_t)bytecounts[s]) < 0) { + _TIFFfree(buf); + return (0); + } + } + _TIFFfree(buf); + return (1); + } + return (0); +} + +static int +cpTiles(TIFF* in, TIFF* out) +{ + tmsize_t bufsize = TIFFTileSize(in); + unsigned char *buf = (unsigned char *)_TIFFmalloc(bufsize); + + if (buf) { + ttile_t t, nt = TIFFNumberOfTiles(in); + uint64 *bytecounts; + + if (!TIFFGetField(in, TIFFTAG_TILEBYTECOUNTS, &bytecounts)) { + fprintf(stderr, "tiffsplit: tile byte counts are missing\n"); + return (0); + } + for (t = 0; t < nt; t++) { + if (bytecounts[t] > (uint64) bufsize) { + buf = (unsigned char *)_TIFFrealloc(buf, (tmsize_t)bytecounts[t]); + if (!buf) + return (0); + bufsize = (tmsize_t)bytecounts[t]; + } + if (TIFFReadRawTile(in, t, buf, (tmsize_t)bytecounts[t]) < 0 || + TIFFWriteRawTile(out, t, buf, (tmsize_t)bytecounts[t]) < 0) { + _TIFFfree(buf); + return (0); + } + } + _TIFFfree(buf); + return (1); + } + return (0); +} + +/* vim: set ts=8 sts=8 sw=8 noet: */ +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/tiff-4.0.3/tools/ycbcr.c b/src/SDL2/external/tiff-4.0.3/tools/ycbcr.c new file mode 100644 index 000000000..8f72447d0 --- /dev/null +++ b/src/SDL2/external/tiff-4.0.3/tools/ycbcr.c @@ -0,0 +1,168 @@ +float ycbcrCoeffs[3] = { .299, .587, .114 }; +/* default coding range is CCIR Rec 601-1 with no headroom/footroom */ +unsigned long refBlackWhite[6] = { 0, 255, 128, 255, 128, 255 }; + +#define LumaRed ycbcrCoeffs[0] +#define LumaGreen ycbcrCoeffs[1] +#define LumaBlue ycbcrCoeffs[2] + +long eRtotal = 0; +long eGtotal = 0; +long eBtotal = 0; +long preveRtotal = 0; +long preveGtotal = 0; +long preveBtotal = 0; +unsigned long AbseRtotal = 0; +unsigned long AbseGtotal = 0; +unsigned long AbseBtotal = 0; +unsigned long eCodes = 0; +unsigned long preveCodes = 0; +unsigned long eBits = 0; +unsigned long preveBits = 0; + +static void setupLumaTables(); +static int abs(int v) { return (v < 0 ? -v : v); } +static double pct(int v,double range) { return (v*100. / range); } +static void check(int R, int G, int B); + +float D1, D2; +float D3, D4; +float D5, D6; + +int +main(int argc, char** argv) +{ + int R, G, B; + + if (argc > 1) { + refBlackWhite[0] = 16; + refBlackWhite[1] = 235; + refBlackWhite[2] = 128; + refBlackWhite[3] = 240; + refBlackWhite[4] = 128; + refBlackWhite[5] = 240; + } + D3 = 2 - 2*LumaRed; + D4 = 2 - 2*LumaBlue; + D1 = 1. / D3; + D2 = 1. / D4; + D5 = D3*LumaRed / LumaGreen; + D6 = D4*LumaBlue / LumaGreen; + setupLumaTables(); + for (R = 0; R < 256; R++) { + for (G = 0; G < 256; G++) + for (B = 0; B < 256; B++) + check(R, G, B); + printf("[%3u] c %u/%u b %u/%u (R %u/%d/%u G %u/%d/%u B %u/%d/%u)\n" + , R + , eCodes - preveCodes, eCodes + , eBits - preveBits, eBits + , abs(AbseRtotal - preveRtotal), eRtotal , AbseRtotal + , abs(AbseGtotal - preveGtotal), eGtotal , AbseGtotal + , abs(AbseBtotal - preveBtotal), eBtotal , AbseBtotal + ); + preveRtotal = AbseRtotal; + preveGtotal = AbseGtotal; + preveBtotal = AbseBtotal; + preveCodes = eCodes; + preveBits = eBits; + } + printf("%u total codes\n", 256*256*256); + printf("total error: %u codes %u bits (R %d/%u G %d/%u B %d/%u)\n" + , eCodes + , eBits + , eRtotal , AbseRtotal + , eGtotal , AbseGtotal + , eBtotal , AbseBtotal + ); + return (0); +} + +float *lumaRed; +float *lumaGreen; +float *lumaBlue; + +static float* +setupLuma(float c) +{ + float *v = (float *)_TIFFmalloc(256 * sizeof (float)); + int i; + for (i = 0; i < 256; i++) + v[i] = c * i; + return (v); +} + +static void +setupLumaTables(void) +{ + lumaRed = setupLuma(LumaRed); + lumaGreen = setupLuma(LumaGreen); + lumaBlue = setupLuma(LumaBlue); +} + +static unsigned +V2Code(float f, unsigned long RB, unsigned long RW, int CR) +{ + unsigned int c = (unsigned int)((((f)*(RW-RB)/CR)+RB)+.5); + return (c > 255 ? 255 : c); +} + +#define Code2V(c, RB, RW, CR) ((((c)-(int)RB)*(float)CR)/(float)(RW-RB)) + +#define CLAMP(f,min,max) \ + (int)((f)+.5 < (min) ? (min) : (f)+.5 > (max) ? (max) : (f)+.5) + +static +void +check(int R, int G, int B) +{ + float Y, Cb, Cr; + int iY, iCb, iCr; + float rY, rCb, rCr; + float rR, rG, rB; + int eR, eG, eB; + + Y = lumaRed[R] + lumaGreen[G] + lumaBlue[B]; + Cb = (B - Y)*D2; + Cr = (R - Y)*D1; + iY = V2Code(Y, refBlackWhite[0], refBlackWhite[1], 255); + iCb = V2Code(Cb, refBlackWhite[2], refBlackWhite[3], 127); + iCr = V2Code(Cr, refBlackWhite[4], refBlackWhite[5], 127); + rCb = Code2V(iCb, refBlackWhite[2], refBlackWhite[3], 127); + rCr = Code2V(iCr, refBlackWhite[4], refBlackWhite[5], 127); + rY = Code2V(iY, refBlackWhite[0], refBlackWhite[1], 255); + rR = rY + rCr*D3; + rB = rY + rCb*D4; + rG = rY - rCb*D6 - rCr*D5; + eR = R - CLAMP(rR,0,255); + eG = G - CLAMP(rG,0,255); + eB = B - CLAMP(rB,0,255); + if (abs(eR) > 1 || abs(eG) > 1 || abs(eB) > 1) { + printf("R %u G %u B %u", R, G, B); + printf(" Y %g Cb %g Cr %g", Y, Cb, Cr); + printf(" iY %u iCb %u iCr %u", iY, iCb, iCr); + printf("\n -> Y %g Cb %g Cr %g", rY, rCb, rCr); + printf(" R %g (%u) G %g (%u) B %g (%u) E=[%d %d %d])\n" + , rR, CLAMP(rR,0,255) + , rG, CLAMP(rG,0,255) + , rB, CLAMP(rB,0,255) + , eR, eG, eB + ); + } + eRtotal += eR; + eGtotal += eG; + eBtotal += eB; + AbseRtotal += abs(eR); + AbseGtotal += abs(eG); + AbseBtotal += abs(eB); + if (eR | eG | eB) + eCodes++; + eBits += abs(eR) + abs(eG) + abs(eB); +} +/* + * Local Variables: + * mode: c + * c-basic-offset: 8 + * fill-column: 78 + * End: + */ diff --git a/src/SDL2/external/zlib-1.2.8/CMakeLists.txt b/src/SDL2/external/zlib-1.2.8/CMakeLists.txt new file mode 100644 index 000000000..0c0247cc5 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/CMakeLists.txt @@ -0,0 +1,249 @@ +cmake_minimum_required(VERSION 2.4.4) +set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON) + +project(zlib C) + +set(VERSION "1.2.8") + +option(ASM686 "Enable building i686 assembly implementation") +option(AMD64 "Enable building amd64 assembly implementation") + +set(INSTALL_BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" CACHE PATH "Installation directory for executables") +set(INSTALL_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Installation directory for libraries") +set(INSTALL_INC_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE PATH "Installation directory for headers") +set(INSTALL_MAN_DIR "${CMAKE_INSTALL_PREFIX}/share/man" CACHE PATH "Installation directory for manual pages") +set(INSTALL_PKGCONFIG_DIR "${CMAKE_INSTALL_PREFIX}/share/pkgconfig" CACHE PATH "Installation directory for pkgconfig (.pc) files") + +include(CheckTypeSize) +include(CheckFunctionExists) +include(CheckIncludeFile) +include(CheckCSourceCompiles) +enable_testing() + +check_include_file(sys/types.h HAVE_SYS_TYPES_H) +check_include_file(stdint.h HAVE_STDINT_H) +check_include_file(stddef.h HAVE_STDDEF_H) + +# +# Check to see if we have large file support +# +set(CMAKE_REQUIRED_DEFINITIONS -D_LARGEFILE64_SOURCE=1) +# We add these other definitions here because CheckTypeSize.cmake +# in CMake 2.4.x does not automatically do so and we want +# compatibility with CMake 2.4.x. +if(HAVE_SYS_TYPES_H) + list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_SYS_TYPES_H) +endif() +if(HAVE_STDINT_H) + list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDINT_H) +endif() +if(HAVE_STDDEF_H) + list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDDEF_H) +endif() +check_type_size(off64_t OFF64_T) +if(HAVE_OFF64_T) + add_definitions(-D_LARGEFILE64_SOURCE=1) +endif() +set(CMAKE_REQUIRED_DEFINITIONS) # clear variable + +# +# Check for fseeko +# +check_function_exists(fseeko HAVE_FSEEKO) +if(NOT HAVE_FSEEKO) + add_definitions(-DNO_FSEEKO) +endif() + +# +# Check for unistd.h +# +check_include_file(unistd.h Z_HAVE_UNISTD_H) + +if(MSVC) + set(CMAKE_DEBUG_POSTFIX "d") + add_definitions(-D_CRT_SECURE_NO_DEPRECATE) + add_definitions(-D_CRT_NONSTDC_NO_DEPRECATE) + include_directories(${CMAKE_CURRENT_SOURCE_DIR}) +endif() + +if(NOT CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR) + # If we're doing an out of source build and the user has a zconf.h + # in their source tree... + if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h) + message(STATUS "Renaming") + message(STATUS " ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h") + message(STATUS "to 'zconf.h.included' because this file is included with zlib") + message(STATUS "but CMake generates it automatically in the build directory.") + file(RENAME ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.included) + endif() +endif() + +set(ZLIB_PC ${CMAKE_CURRENT_BINARY_DIR}/zlib.pc) +configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/zlib.pc.cmakein + ${ZLIB_PC} @ONLY) +configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.cmakein + ${CMAKE_CURRENT_BINARY_DIR}/zconf.h @ONLY) +include_directories(${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_SOURCE_DIR}) + + +#============================================================================ +# zlib +#============================================================================ + +set(ZLIB_PUBLIC_HDRS + ${CMAKE_CURRENT_BINARY_DIR}/zconf.h + zlib.h +) +set(ZLIB_PRIVATE_HDRS + crc32.h + deflate.h + gzguts.h + inffast.h + inffixed.h + inflate.h + inftrees.h + trees.h + zutil.h +) +set(ZLIB_SRCS + adler32.c + compress.c + crc32.c + deflate.c + gzclose.c + gzlib.c + gzread.c + gzwrite.c + inflate.c + infback.c + inftrees.c + inffast.c + trees.c + uncompr.c + zutil.c +) + +if(NOT MINGW) + set(ZLIB_DLL_SRCS + win32/zlib1.rc # If present will override custom build rule below. + ) +endif() + +if(CMAKE_COMPILER_IS_GNUCC) + if(ASM686) + set(ZLIB_ASMS contrib/asm686/match.S) + elseif (AMD64) + set(ZLIB_ASMS contrib/amd64/amd64-match.S) + endif () + + if(ZLIB_ASMS) + add_definitions(-DASMV) + set_source_files_properties(${ZLIB_ASMS} PROPERTIES LANGUAGE C COMPILE_FLAGS -DNO_UNDERLINE) + endif() +endif() + +if(MSVC) + if(ASM686) + ENABLE_LANGUAGE(ASM_MASM) + set(ZLIB_ASMS + contrib/masmx86/inffas32.asm + contrib/masmx86/match686.asm + ) + elseif (AMD64) + ENABLE_LANGUAGE(ASM_MASM) + set(ZLIB_ASMS + contrib/masmx64/gvmat64.asm + contrib/masmx64/inffasx64.asm + ) + endif() + + if(ZLIB_ASMS) + add_definitions(-DASMV -DASMINF) + endif() +endif() + +# parse the full version number from zlib.h and include in ZLIB_FULL_VERSION +file(READ ${CMAKE_CURRENT_SOURCE_DIR}/zlib.h _zlib_h_contents) +string(REGEX REPLACE ".*#define[ \t]+ZLIB_VERSION[ \t]+\"([-0-9A-Za-z.]+)\".*" + "\\1" ZLIB_FULL_VERSION ${_zlib_h_contents}) + +if(MINGW) + # This gets us DLL resource information when compiling on MinGW. + if(NOT CMAKE_RC_COMPILER) + set(CMAKE_RC_COMPILER windres.exe) + endif() + + add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj + COMMAND ${CMAKE_RC_COMPILER} + -D GCC_WINDRES + -I ${CMAKE_CURRENT_SOURCE_DIR} + -I ${CMAKE_CURRENT_BINARY_DIR} + -o ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj + -i ${CMAKE_CURRENT_SOURCE_DIR}/win32/zlib1.rc) + set(ZLIB_DLL_SRCS ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj) +endif(MINGW) + +add_library(zlib SHARED ${ZLIB_SRCS} ${ZLIB_ASMS} ${ZLIB_DLL_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS}) +add_library(zlibstatic STATIC ${ZLIB_SRCS} ${ZLIB_ASMS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS}) +set_target_properties(zlib PROPERTIES DEFINE_SYMBOL ZLIB_DLL) +set_target_properties(zlib PROPERTIES SOVERSION 1) + +if(NOT CYGWIN) + # This property causes shared libraries on Linux to have the full version + # encoded into their final filename. We disable this on Cygwin because + # it causes cygz-${ZLIB_FULL_VERSION}.dll to be created when cygz.dll + # seems to be the default. + # + # This has no effect with MSVC, on that platform the version info for + # the DLL comes from the resource file win32/zlib1.rc + set_target_properties(zlib PROPERTIES VERSION ${ZLIB_FULL_VERSION}) +endif() + +if(UNIX) + # On unix-like platforms the library is almost always called libz + set_target_properties(zlib zlibstatic PROPERTIES OUTPUT_NAME z) + if(NOT APPLE) + set_target_properties(zlib PROPERTIES LINK_FLAGS "-Wl,--version-script,\"${CMAKE_CURRENT_SOURCE_DIR}/zlib.map\"") + endif() +elseif(BUILD_SHARED_LIBS AND WIN32) + # Creates zlib1.dll when building shared library version + set_target_properties(zlib PROPERTIES SUFFIX "1.dll") +endif() + +if(NOT SKIP_INSTALL_LIBRARIES AND NOT SKIP_INSTALL_ALL ) + install(TARGETS zlib zlibstatic + RUNTIME DESTINATION "${INSTALL_BIN_DIR}" + ARCHIVE DESTINATION "${INSTALL_LIB_DIR}" + LIBRARY DESTINATION "${INSTALL_LIB_DIR}" ) +endif() +if(NOT SKIP_INSTALL_HEADERS AND NOT SKIP_INSTALL_ALL ) + install(FILES ${ZLIB_PUBLIC_HDRS} DESTINATION "${INSTALL_INC_DIR}") +endif() +if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL ) + install(FILES zlib.3 DESTINATION "${INSTALL_MAN_DIR}/man3") +endif() +if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL ) + install(FILES ${ZLIB_PC} DESTINATION "${INSTALL_PKGCONFIG_DIR}") +endif() + +#============================================================================ +# Example binaries +#============================================================================ + +add_executable(example test/example.c) +target_link_libraries(example zlib) +add_test(example example) + +add_executable(minigzip test/minigzip.c) +target_link_libraries(minigzip zlib) + +if(HAVE_OFF64_T) + add_executable(example64 test/example.c) + target_link_libraries(example64 zlib) + set_target_properties(example64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64") + add_test(example64 example64) + + add_executable(minigzip64 test/minigzip.c) + target_link_libraries(minigzip64 zlib) + set_target_properties(minigzip64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64") +endif() diff --git a/src/SDL2/external/zlib-1.2.8/ChangeLog b/src/SDL2/external/zlib-1.2.8/ChangeLog new file mode 100644 index 000000000..f22aabaef --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/ChangeLog @@ -0,0 +1,1472 @@ + + ChangeLog file for zlib + +Changes in 1.2.8 (28 Apr 2013) +- Update contrib/minizip/iowin32.c for Windows RT [Vollant] +- Do not force Z_CONST for C++ +- Clean up contrib/vstudio [Ro§] +- Correct spelling error in zlib.h +- Fix mixed line endings in contrib/vstudio + +Changes in 1.2.7.3 (13 Apr 2013) +- Fix version numbers and DLL names in contrib/vstudio/*/zlib.rc + +Changes in 1.2.7.2 (13 Apr 2013) +- Change check for a four-byte type back to hexadecimal +- Fix typo in win32/Makefile.msc +- Add casts in gzwrite.c for pointer differences + +Changes in 1.2.7.1 (24 Mar 2013) +- Replace use of unsafe string functions with snprintf if available +- Avoid including stddef.h on Windows for Z_SOLO compile [Niessink] +- Fix gzgetc undefine when Z_PREFIX set [Turk] +- Eliminate use of mktemp in Makefile (not always available) +- Fix bug in 'F' mode for gzopen() +- Add inflateGetDictionary() function +- Correct comment in deflate.h +- Use _snprintf for snprintf in Microsoft C +- On Darwin, only use /usr/bin/libtool if libtool is not Apple +- Delete "--version" file if created by "ar --version" [Richard G.] +- Fix configure check for veracity of compiler error return codes +- Fix CMake compilation of static lib for MSVC2010 x64 +- Remove unused variable in infback9.c +- Fix argument checks in gzlog_compress() and gzlog_write() +- Clean up the usage of z_const and respect const usage within zlib +- Clean up examples/gzlog.[ch] comparisons of different types +- Avoid shift equal to bits in type (caused endless loop) +- Fix unintialized value bug in gzputc() introduced by const patches +- Fix memory allocation error in examples/zran.c [Nor] +- Fix bug where gzopen(), gzclose() would write an empty file +- Fix bug in gzclose() when gzwrite() runs out of memory +- Check for input buffer malloc failure in examples/gzappend.c +- Add note to contrib/blast to use binary mode in stdio +- Fix comparisons of differently signed integers in contrib/blast +- Check for invalid code length codes in contrib/puff +- Fix serious but very rare decompression bug in inftrees.c +- Update inflateBack() comments, since inflate() can be faster +- Use underscored I/O function names for WINAPI_FAMILY +- Add _tr_flush_bits to the external symbols prefixed by --zprefix +- Add contrib/vstudio/vc10 pre-build step for static only +- Quote --version-script argument in CMakeLists.txt +- Don't specify --version-script on Apple platforms in CMakeLists.txt +- Fix casting error in contrib/testzlib/testzlib.c +- Fix types in contrib/minizip to match result of get_crc_table() +- Simplify contrib/vstudio/vc10 with 'd' suffix +- Add TOP support to win32/Makefile.msc +- Suport i686 and amd64 assembler builds in CMakeLists.txt +- Fix typos in the use of _LARGEFILE64_SOURCE in zconf.h +- Add vc11 and vc12 build files to contrib/vstudio +- Add gzvprintf() as an undocumented function in zlib +- Fix configure for Sun shell +- Remove runtime check in configure for four-byte integer type +- Add casts and consts to ease user conversion to C++ +- Add man pages for minizip and miniunzip +- In Makefile uninstall, don't rm if preceding cd fails +- Do not return Z_BUF_ERROR if deflateParam() has nothing to write + +Changes in 1.2.7 (2 May 2012) +- Replace use of memmove() with a simple copy for portability +- Test for existence of strerror +- Restore gzgetc_ for backward compatibility with 1.2.6 +- Fix build with non-GNU make on Solaris +- Require gcc 4.0 or later on Mac OS X to use the hidden attribute +- Include unistd.h for Watcom C +- Use __WATCOMC__ instead of __WATCOM__ +- Do not use the visibility attribute if NO_VIZ defined +- Improve the detection of no hidden visibility attribute +- Avoid using __int64 for gcc or solo compilation +- Cast to char * in gzprintf to avoid warnings [Zinser] +- Fix make_vms.com for VAX [Zinser] +- Don't use library or built-in byte swaps +- Simplify test and use of gcc hidden attribute +- Fix bug in gzclose_w() when gzwrite() fails to allocate memory +- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen() +- Fix bug in test/minigzip.c for configure --solo +- Fix contrib/vstudio project link errors [Mohanathas] +- Add ability to choose the builder in make_vms.com [Schweda] +- Add DESTDIR support to mingw32 win32/Makefile.gcc +- Fix comments in win32/Makefile.gcc for proper usage +- Allow overriding the default install locations for cmake +- Generate and install the pkg-config file with cmake +- Build both a static and a shared version of zlib with cmake +- Include version symbols for cmake builds +- If using cmake with MSVC, add the source directory to the includes +- Remove unneeded EXTRA_CFLAGS from win32/Makefile.gcc [Truta] +- Move obsolete emx makefile to old [Truta] +- Allow the use of -Wundef when compiling or using zlib +- Avoid the use of the -u option with mktemp +- Improve inflate() documentation on the use of Z_FINISH +- Recognize clang as gcc +- Add gzopen_w() in Windows for wide character path names +- Rename zconf.h in CMakeLists.txt to move it out of the way +- Add source directory in CMakeLists.txt for building examples +- Look in build directory for zlib.pc in CMakeLists.txt +- Remove gzflags from zlibvc.def in vc9 and vc10 +- Fix contrib/minizip compilation in the MinGW environment +- Update ./configure for Solaris, support --64 [Mooney] +- Remove -R. from Solaris shared build (possible security issue) +- Avoid race condition for parallel make (-j) running example +- Fix type mismatch between get_crc_table() and crc_table +- Fix parsing of version with "-" in CMakeLists.txt [Snider, Ziegler] +- Fix the path to zlib.map in CMakeLists.txt +- Force the native libtool in Mac OS X to avoid GNU libtool [Beebe] +- Add instructions to win32/Makefile.gcc for shared install [Torri] + +Changes in 1.2.6.1 (12 Feb 2012) +- Avoid the use of the Objective-C reserved name "id" +- Include io.h in gzguts.h for Microsoft compilers +- Fix problem with ./configure --prefix and gzgetc macro +- Include gz_header definition when compiling zlib solo +- Put gzflags() functionality back in zutil.c +- Avoid library header include in crc32.c for Z_SOLO +- Use name in GCC_CLASSIC as C compiler for coverage testing, if set +- Minor cleanup in contrib/minizip/zip.c [Vollant] +- Update make_vms.com [Zinser] +- Remove unnecessary gzgetc_ function +- Use optimized byte swap operations for Microsoft and GNU [Snyder] +- Fix minor typo in zlib.h comments [Rzesniowiecki] + +Changes in 1.2.6 (29 Jan 2012) +- Update the Pascal interface in contrib/pascal +- Fix function numbers for gzgetc_ in zlibvc.def files +- Fix configure.ac for contrib/minizip [Schiffer] +- Fix large-entry detection in minizip on 64-bit systems [Schiffer] +- Have ./configure use the compiler return code for error indication +- Fix CMakeLists.txt for cross compilation [McClure] +- Fix contrib/minizip/zip.c for 64-bit architectures [Dalsnes] +- Fix compilation of contrib/minizip on FreeBSD [Marquez] +- Correct suggested usages in win32/Makefile.msc [Shachar, Horvath] +- Include io.h for Turbo C / Borland C on all platforms [Truta] +- Make version explicit in contrib/minizip/configure.ac [Bosmans] +- Avoid warning for no encryption in contrib/minizip/zip.c [Vollant] +- Minor cleanup up contrib/minizip/unzip.c [Vollant] +- Fix bug when compiling minizip with C++ [Vollant] +- Protect for long name and extra fields in contrib/minizip [Vollant] +- Avoid some warnings in contrib/minizip [Vollant] +- Add -I../.. -L../.. to CFLAGS for minizip and miniunzip +- Add missing libs to minizip linker command +- Add support for VPATH builds in contrib/minizip +- Add an --enable-demos option to contrib/minizip/configure +- Add the generation of configure.log by ./configure +- Exit when required parameters not provided to win32/Makefile.gcc +- Have gzputc return the character written instead of the argument +- Use the -m option on ldconfig for BSD systems [Tobias] +- Correct in zlib.map when deflateResetKeep was added + +Changes in 1.2.5.3 (15 Jan 2012) +- Restore gzgetc function for binary compatibility +- Do not use _lseeki64 under Borland C++ [Truta] +- Update win32/Makefile.msc to build test/*.c [Truta] +- Remove old/visualc6 given CMakefile and other alternatives +- Update AS400 build files and documentation [Monnerat] +- Update win32/Makefile.gcc to build test/*.c [Truta] +- Permit stronger flushes after Z_BLOCK flushes +- Avoid extraneous empty blocks when doing empty flushes +- Permit Z_NULL arguments to deflatePending +- Allow deflatePrime() to insert bits in the middle of a stream +- Remove second empty static block for Z_PARTIAL_FLUSH +- Write out all of the available bits when using Z_BLOCK +- Insert the first two strings in the hash table after a flush + +Changes in 1.2.5.2 (17 Dec 2011) +- fix ld error: unable to find version dependency 'ZLIB_1.2.5' +- use relative symlinks for shared libs +- Avoid searching past window for Z_RLE strategy +- Assure that high-water mark initialization is always applied in deflate +- Add assertions to fill_window() in deflate.c to match comments +- Update python link in README +- Correct spelling error in gzread.c +- Fix bug in gzgets() for a concatenated empty gzip stream +- Correct error in comment for gz_make() +- Change gzread() and related to ignore junk after gzip streams +- Allow gzread() and related to continue after gzclearerr() +- Allow gzrewind() and gzseek() after a premature end-of-file +- Simplify gzseek() now that raw after gzip is ignored +- Change gzgetc() to a macro for speed (~40% speedup in testing) +- Fix gzclose() to return the actual error last encountered +- Always add large file support for windows +- Include zconf.h for windows large file support +- Include zconf.h.cmakein for windows large file support +- Update zconf.h.cmakein on make distclean +- Merge vestigial vsnprintf determination from zutil.h to gzguts.h +- Clarify how gzopen() appends in zlib.h comments +- Correct documentation of gzdirect() since junk at end now ignored +- Add a transparent write mode to gzopen() when 'T' is in the mode +- Update python link in zlib man page +- Get inffixed.h and MAKEFIXED result to match +- Add a ./config --solo option to make zlib subset with no libary use +- Add undocumented inflateResetKeep() function for CAB file decoding +- Add --cover option to ./configure for gcc coverage testing +- Add #define ZLIB_CONST option to use const in the z_stream interface +- Add comment to gzdopen() in zlib.h to use dup() when using fileno() +- Note behavior of uncompress() to provide as much data as it can +- Add files in contrib/minizip to aid in building libminizip +- Split off AR options in Makefile.in and configure +- Change ON macro to Z_ARG to avoid application conflicts +- Facilitate compilation with Borland C++ for pragmas and vsnprintf +- Include io.h for Turbo C / Borland C++ +- Move example.c and minigzip.c to test/ +- Simplify incomplete code table filling in inflate_table() +- Remove code from inflate.c and infback.c that is impossible to execute +- Test the inflate code with full coverage +- Allow deflateSetDictionary, inflateSetDictionary at any time (in raw) +- Add deflateResetKeep and fix inflateResetKeep to retain dictionary +- Fix gzwrite.c to accommodate reduced memory zlib compilation +- Have inflate() with Z_FINISH avoid the allocation of a window +- Do not set strm->adler when doing raw inflate +- Fix gzeof() to behave just like feof() when read is not past end of file +- Fix bug in gzread.c when end-of-file is reached +- Avoid use of Z_BUF_ERROR in gz* functions except for premature EOF +- Document gzread() capability to read concurrently written files +- Remove hard-coding of resource compiler in CMakeLists.txt [Blammo] + +Changes in 1.2.5.1 (10 Sep 2011) +- Update FAQ entry on shared builds (#13) +- Avoid symbolic argument to chmod in Makefile.in +- Fix bug and add consts in contrib/puff [Oberhumer] +- Update contrib/puff/zeros.raw test file to have all block types +- Add full coverage test for puff in contrib/puff/Makefile +- Fix static-only-build install in Makefile.in +- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno] +- Add libz.a dependency to shared in Makefile.in for parallel builds +- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out +- Replace $(...) with `...` in configure for non-bash sh [Bowler] +- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen] +- Add solaris* to Linux* in configure to allow gcc use [Groffen] +- Add *bsd* to Linux* case in configure [Bar-Lev] +- Add inffast.obj to dependencies in win32/Makefile.msc +- Correct spelling error in deflate.h [Kohler] +- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc +- Add test to configure for GNU C looking for gcc in output of $cc -v +- Add zlib.pc generation to win32/Makefile.gcc [Weigelt] +- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not +- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense +- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser) +- Make stronger test in zconf.h to include unistd.h for LFS +- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack] +- Fix zlib.h LFS support when Z_PREFIX used +- Add updated as400 support (removed from old) [Monnerat] +- Avoid deflate sensitivity to volatile input data +- Avoid division in adler32_combine for NO_DIVIDE +- Clarify the use of Z_FINISH with deflateBound() amount of space +- Set binary for output file in puff.c +- Use u4 type for crc_table to avoid conversion warnings +- Apply casts in zlib.h to avoid conversion warnings +- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller] +- Improve inflateSync() documentation to note indeterminancy +- Add deflatePending() function to return the amount of pending output +- Correct the spelling of "specification" in FAQ [Randers-Pehrson] +- Add a check in configure for stdarg.h, use for gzprintf() +- Check that pointers fit in ints when gzprint() compiled old style +- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler] +- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt] +- Add debug records in assmebler code [Londer] +- Update RFC references to use http://tools.ietf.org/html/... [Li] +- Add --archs option, use of libtool to configure for Mac OS X [Borstel] + +Changes in 1.2.5 (19 Apr 2010) +- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev] +- Default to libdir as sharedlibdir in configure [Nieder] +- Update copyright dates on modified source files +- Update trees.c to be able to generate modified trees.h +- Exit configure for MinGW, suggesting win32/Makefile.gcc +- Check for NULL path in gz_open [Homurlu] + +Changes in 1.2.4.5 (18 Apr 2010) +- Set sharedlibdir in configure [Torok] +- Set LDFLAGS in Makefile.in [Bar-Lev] +- Avoid mkdir objs race condition in Makefile.in [Bowler] +- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays +- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C +- Don't use hidden attribute when it is a warning generator (e.g. Solaris) + +Changes in 1.2.4.4 (18 Apr 2010) +- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok] +- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty +- Try to use bash or ksh regardless of functionality of /bin/sh +- Fix configure incompatibility with NetBSD sh +- Remove attempt to run under bash or ksh since have better NetBSD fix +- Fix win32/Makefile.gcc for MinGW [Bar-Lev] +- Add diagnostic messages when using CROSS_PREFIX in configure +- Added --sharedlibdir option to configure [Weigelt] +- Use hidden visibility attribute when available [Frysinger] + +Changes in 1.2.4.3 (10 Apr 2010) +- Only use CROSS_PREFIX in configure for ar and ranlib if they exist +- Use CROSS_PREFIX for nm [Bar-Lev] +- Assume _LARGEFILE64_SOURCE defined is equivalent to true +- Avoid use of undefined symbols in #if with && and || +- Make *64 prototypes in gzguts.h consistent with functions +- Add -shared load option for MinGW in configure [Bowler] +- Move z_off64_t to public interface, use instead of off64_t +- Remove ! from shell test in configure (not portable to Solaris) +- Change +0 macro tests to -0 for possibly increased portability + +Changes in 1.2.4.2 (9 Apr 2010) +- Add consistent carriage returns to readme.txt's in masmx86 and masmx64 +- Really provide prototypes for *64 functions when building without LFS +- Only define unlink() in minigzip.c if unistd.h not included +- Update README to point to contrib/vstudio project files +- Move projects/vc6 to old/ and remove projects/ +- Include stdlib.h in minigzip.c for setmode() definition under WinCE +- Clean up assembler builds in win32/Makefile.msc [Rowe] +- Include sys/types.h for Microsoft for off_t definition +- Fix memory leak on error in gz_open() +- Symbolize nm as $NM in configure [Weigelt] +- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt] +- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined +- Fix bug in gzeof() to take into account unused input data +- Avoid initialization of structures with variables in puff.c +- Updated win32/README-WIN32.txt [Rowe] + +Changes in 1.2.4.1 (28 Mar 2010) +- Remove the use of [a-z] constructs for sed in configure [gentoo 310225] +- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech] +- Restore "for debugging" comment on sprintf() in gzlib.c +- Remove fdopen for MVS from gzguts.h +- Put new README-WIN32.txt in win32 [Rowe] +- Add check for shell to configure and invoke another shell if needed +- Fix big fat stinking bug in gzseek() on uncompressed files +- Remove vestigial F_OPEN64 define in zutil.h +- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE +- Avoid errors on non-LFS systems when applications define LFS macros +- Set EXE to ".exe" in configure for MINGW [Kahle] +- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill] +- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev] +- Add DLL install in win32/makefile.gcc [Bar-Lev] +- Allow Linux* or linux* from uname in configure [Bar-Lev] +- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev] +- Add cross-compilation prefixes to configure [Bar-Lev] +- Match type exactly in gz_load() invocation in gzread.c +- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func +- Provide prototypes for *64 functions when building zlib without LFS +- Don't use -lc when linking shared library on MinGW +- Remove errno.h check in configure and vestigial errno code in zutil.h + +Changes in 1.2.4 (14 Mar 2010) +- Fix VER3 extraction in configure for no fourth subversion +- Update zlib.3, add docs to Makefile.in to make .pdf out of it +- Add zlib.3.pdf to distribution +- Don't set error code in gzerror() if passed pointer is NULL +- Apply destination directory fixes to CMakeLists.txt [Lowman] +- Move #cmakedefine's to a new zconf.in.cmakein +- Restore zconf.h for builds that don't use configure or cmake +- Add distclean to dummy Makefile for convenience +- Update and improve INDEX, README, and FAQ +- Update CMakeLists.txt for the return of zconf.h [Lowman] +- Update contrib/vstudio/vc9 and vc10 [Vollant] +- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc +- Apply license and readme changes to contrib/asm686 [Raiter] +- Check file name lengths and add -c option in minigzip.c [Li] +- Update contrib/amd64 and contrib/masmx86/ [Vollant] +- Avoid use of "eof" parameter in trees.c to not shadow library variable +- Update make_vms.com for removal of zlibdefs.h [Zinser] +- Update assembler code and vstudio projects in contrib [Vollant] +- Remove outdated assembler code contrib/masm686 and contrib/asm586 +- Remove old vc7 and vc8 from contrib/vstudio +- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe] +- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open() +- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant] +- Remove *64 functions from win32/zlib.def (they're not 64-bit yet) +- Fix bug in void-returning vsprintf() case in gzwrite.c +- Fix name change from inflate.h in contrib/inflate86/inffas86.c +- Check if temporary file exists before removing in make_vms.com [Zinser] +- Fix make install and uninstall for --static option +- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta] +- Update readme.txt in contrib/masmx64 and masmx86 to assemble + +Changes in 1.2.3.9 (21 Feb 2010) +- Expunge gzio.c +- Move as400 build information to old +- Fix updates in contrib/minizip and contrib/vstudio +- Add const to vsnprintf test in configure to avoid warnings [Weigelt] +- Delete zconf.h (made by configure) [Weigelt] +- Change zconf.in.h to zconf.h.in per convention [Weigelt] +- Check for NULL buf in gzgets() +- Return empty string for gzgets() with len == 1 (like fgets()) +- Fix description of gzgets() in zlib.h for end-of-file, NULL return +- Update minizip to 1.1 [Vollant] +- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c +- Note in zlib.h that gzerror() should be used to distinguish from EOF +- Remove use of snprintf() from gzlib.c +- Fix bug in gzseek() +- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant] +- Fix zconf.h generation in CMakeLists.txt [Lowman] +- Improve comments in zconf.h where modified by configure + +Changes in 1.2.3.8 (13 Feb 2010) +- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer] +- Use z_off64_t in gz_zero() and gz_skip() to match state->skip +- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t) +- Revert to Makefile.in from 1.2.3.6 (live with the clutter) +- Fix missing error return in gzflush(), add zlib.h note +- Add *64 functions to zlib.map [Levin] +- Fix signed/unsigned comparison in gz_comp() +- Use SFLAGS when testing shared linking in configure +- Add --64 option to ./configure to use -m64 with gcc +- Fix ./configure --help to correctly name options +- Have make fail if a test fails [Levin] +- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson] +- Remove assembler object files from contrib + +Changes in 1.2.3.7 (24 Jan 2010) +- Always gzopen() with O_LARGEFILE if available +- Fix gzdirect() to work immediately after gzopen() or gzdopen() +- Make gzdirect() more precise when the state changes while reading +- Improve zlib.h documentation in many places +- Catch memory allocation failure in gz_open() +- Complete close operation if seek forward in gzclose_w() fails +- Return Z_ERRNO from gzclose_r() if close() fails +- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL +- Return zero for gzwrite() errors to match zlib.h description +- Return -1 on gzputs() error to match zlib.h description +- Add zconf.in.h to allow recovery from configure modification [Weigelt] +- Fix static library permissions in Makefile.in [Weigelt] +- Avoid warnings in configure tests that hide functionality [Weigelt] +- Add *BSD and DragonFly to Linux case in configure [gentoo 123571] +- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212] +- Avoid access of uninitialized data for first inflateReset2 call [Gomes] +- Keep object files in subdirectories to reduce the clutter somewhat +- Remove default Makefile and zlibdefs.h, add dummy Makefile +- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_ +- Remove zlibdefs.h completely -- modify zconf.h instead + +Changes in 1.2.3.6 (17 Jan 2010) +- Avoid void * arithmetic in gzread.c and gzwrite.c +- Make compilers happier with const char * for gz_error message +- Avoid unused parameter warning in inflate.c +- Avoid signed-unsigned comparison warning in inflate.c +- Indent #pragma's for traditional C +- Fix usage of strwinerror() in glib.c, change to gz_strwinerror() +- Correct email address in configure for system options +- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser] +- Update zlib.map [Brown] +- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok] +- Apply various fixes to CMakeLists.txt [Lowman] +- Add checks on len in gzread() and gzwrite() +- Add error message for no more room for gzungetc() +- Remove zlib version check in gzwrite() +- Defer compression of gzprintf() result until need to +- Use snprintf() in gzdopen() if available +- Remove USE_MMAP configuration determination (only used by minigzip) +- Remove examples/pigz.c (available separately) +- Update examples/gun.c to 1.6 + +Changes in 1.2.3.5 (8 Jan 2010) +- Add space after #if in zutil.h for some compilers +- Fix relatively harmless bug in deflate_fast() [Exarevsky] +- Fix same problem in deflate_slow() +- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown] +- Add deflate_rle() for faster Z_RLE strategy run-length encoding +- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding +- Change name of "write" variable in inffast.c to avoid library collisions +- Fix premature EOF from gzread() in gzio.c [Brown] +- Use zlib header window size if windowBits is 0 in inflateInit2() +- Remove compressBound() call in deflate.c to avoid linking compress.o +- Replace use of errno in gz* with functions, support WinCE [Alves] +- Provide alternative to perror() in minigzip.c for WinCE [Alves] +- Don't use _vsnprintf on later versions of MSVC [Lowman] +- Add CMake build script and input file [Lowman] +- Update contrib/minizip to 1.1 [Svensson, Vollant] +- Moved nintendods directory from contrib to . +- Replace gzio.c with a new set of routines with the same functionality +- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above +- Update contrib/minizip to 1.1b +- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h + +Changes in 1.2.3.4 (21 Dec 2009) +- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility +- Update comments in configure and Makefile.in for default --shared +- Fix test -z's in configure [Marquess] +- Build examplesh and minigzipsh when not testing +- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h +- Import LDFLAGS from the environment in configure +- Fix configure to populate SFLAGS with discovered CFLAGS options +- Adapt make_vms.com to the new Makefile.in [Zinser] +- Add zlib2ansi script for C++ compilation [Marquess] +- Add _FILE_OFFSET_BITS=64 test to make test (when applicable) +- Add AMD64 assembler code for longest match to contrib [Teterin] +- Include options from $SFLAGS when doing $LDSHARED +- Simplify 64-bit file support by introducing z_off64_t type +- Make shared object files in objs directory to work around old Sun cc +- Use only three-part version number for Darwin shared compiles +- Add rc option to ar in Makefile.in for when ./configure not run +- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4* +- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile +- Protect against _FILE_OFFSET_BITS being defined when compiling zlib +- Rename Makefile.in targets allstatic to static and allshared to shared +- Fix static and shared Makefile.in targets to be independent +- Correct error return bug in gz_open() by setting state [Brown] +- Put spaces before ;;'s in configure for better sh compatibility +- Add pigz.c (parallel implementation of gzip) to examples/ +- Correct constant in crc32.c to UL [Leventhal] +- Reject negative lengths in crc32_combine() +- Add inflateReset2() function to work like inflateEnd()/inflateInit2() +- Include sys/types.h for _LARGEFILE64_SOURCE [Brown] +- Correct typo in doc/algorithm.txt [Janik] +- Fix bug in adler32_combine() [Zhu] +- Catch missing-end-of-block-code error in all inflates and in puff + Assures that random input to inflate eventually results in an error +- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/ +- Update ENOUGH and its usage to reflect discovered bounds +- Fix gzerror() error report on empty input file [Brown] +- Add ush casts in trees.c to avoid pedantic runtime errors +- Fix typo in zlib.h uncompress() description [Reiss] +- Correct inflate() comments with regard to automatic header detection +- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays) +- Put new version of gzlog (2.0) in examples with interruption recovery +- Add puff compile option to permit invalid distance-too-far streams +- Add puff TEST command options, ability to read piped input +- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but + _LARGEFILE64_SOURCE not defined +- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart +- Fix deflateSetDictionary() to use all 32K for output consistency +- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h) +- Clear bytes after deflate lookahead to avoid use of uninitialized data +- Change a limit in inftrees.c to be more transparent to Coverity Prevent +- Update win32/zlib.def with exported symbols from zlib.h +- Correct spelling errors in zlib.h [Willem, Sobrado] +- Allow Z_BLOCK for deflate() to force a new block +- Allow negative bits in inflatePrime() to delete existing bit buffer +- Add Z_TREES flush option to inflate() to return at end of trees +- Add inflateMark() to return current state information for random access +- Add Makefile for NintendoDS to contrib [Costa] +- Add -w in configure compile tests to avoid spurious warnings [Beucler] +- Fix typos in zlib.h comments for deflateSetDictionary() +- Fix EOF detection in transparent gzread() [Maier] + +Changes in 1.2.3.3 (2 October 2006) +- Make --shared the default for configure, add a --static option +- Add compile option to permit invalid distance-too-far streams +- Add inflateUndermine() function which is required to enable above +- Remove use of "this" variable name for C++ compatibility [Marquess] +- Add testing of shared library in make test, if shared library built +- Use ftello() and fseeko() if available instead of ftell() and fseek() +- Provide two versions of all functions that use the z_off_t type for + binary compatibility -- a normal version and a 64-bit offset version, + per the Large File Support Extension when _LARGEFILE64_SOURCE is + defined; use the 64-bit versions by default when _FILE_OFFSET_BITS + is defined to be 64 +- Add a --uname= option to configure to perhaps help with cross-compiling + +Changes in 1.2.3.2 (3 September 2006) +- Turn off silly Borland warnings [Hay] +- Use off64_t and define _LARGEFILE64_SOURCE when present +- Fix missing dependency on inffixed.h in Makefile.in +- Rig configure --shared to build both shared and static [Teredesai, Truta] +- Remove zconf.in.h and instead create a new zlibdefs.h file +- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant] +- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt] + +Changes in 1.2.3.1 (16 August 2006) +- Add watcom directory with OpenWatcom make files [Daniel] +- Remove #undef of FAR in zconf.in.h for MVS [Fedtke] +- Update make_vms.com [Zinser] +- Use -fPIC for shared build in configure [Teredesai, Nicholson] +- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen] +- Use fdopen() (not _fdopen()) for Interix in zutil.h [BŠck] +- Add some FAQ entries about the contrib directory +- Update the MVS question in the FAQ +- Avoid extraneous reads after EOF in gzio.c [Brown] +- Correct spelling of "successfully" in gzio.c [Randers-Pehrson] +- Add comments to zlib.h about gzerror() usage [Brown] +- Set extra flags in gzip header in gzopen() like deflate() does +- Make configure options more compatible with double-dash conventions + [Weigelt] +- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen] +- Fix uninstall target in Makefile.in [Truta] +- Add pkgconfig support [Weigelt] +- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt] +- Replace set_data_type() with a more accurate detect_data_type() in + trees.c, according to the txtvsbin.txt document [Truta] +- Swap the order of #include and #include "zlib.h" in + gzio.c, example.c and minigzip.c [Truta] +- Shut up annoying VS2005 warnings about standard C deprecation [Rowe, + Truta] (where?) +- Fix target "clean" from win32/Makefile.bor [Truta] +- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe] +- Update zlib www home address in win32/DLL_FAQ.txt [Truta] +- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove] +- Enable browse info in the "Debug" and "ASM Debug" configurations in + the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta] +- Add pkgconfig support [Weigelt] +- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h, + for use in win32/zlib1.rc [Polushin, Rowe, Truta] +- Add a document that explains the new text detection scheme to + doc/txtvsbin.txt [Truta] +- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta] +- Move algorithm.txt into doc/ [Truta] +- Synchronize FAQ with website +- Fix compressBound(), was low for some pathological cases [Fearnley] +- Take into account wrapper variations in deflateBound() +- Set examples/zpipe.c input and output to binary mode for Windows +- Update examples/zlib_how.html with new zpipe.c (also web site) +- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems + that gcc became pickier in 4.0) +- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain + un-versioned, the patch adds versioning only for symbols introduced in + zlib-1.2.0 or later. It also declares as local those symbols which are + not designed to be exported." [Levin] +- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure +- Do not initialize global static by default in trees.c, add a response + NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess] +- Don't use strerror() in gzio.c under WinCE [Yakimov] +- Don't use errno.h in zutil.h under WinCE [Yakimov] +- Move arguments for AR to its usage to allow replacing ar [Marot] +- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson] +- Improve inflateInit() and inflateInit2() documentation +- Fix structure size comment in inflate.h +- Change configure help option from --h* to --help [Santos] + +Changes in 1.2.3 (18 July 2005) +- Apply security vulnerability fixes to contrib/infback9 as well +- Clean up some text files (carriage returns, trailing space) +- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant] + +Changes in 1.2.2.4 (11 July 2005) +- Add inflatePrime() function for starting inflation at bit boundary +- Avoid some Visual C warnings in deflate.c +- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit + compile +- Fix some spelling errors in comments [Betts] +- Correct inflateInit2() error return documentation in zlib.h +- Add zran.c example of compressed data random access to examples + directory, shows use of inflatePrime() +- Fix cast for assignments to strm->state in inflate.c and infback.c +- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer] +- Move declarations of gf2 functions to right place in crc32.c [Oberhumer] +- Add cast in trees.c t avoid a warning [Oberhumer] +- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer] +- Update make_vms.com [Zinser] +- Initialize state->write in inflateReset() since copied in inflate_fast() +- Be more strict on incomplete code sets in inflate_table() and increase + ENOUGH and MAXD -- this repairs a possible security vulnerability for + invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for + discovering the vulnerability and providing test cases. +- Add ia64 support to configure for HP-UX [Smith] +- Add error return to gzread() for format or i/o error [Levin] +- Use malloc.h for OS/2 [Necasek] + +Changes in 1.2.2.3 (27 May 2005) +- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile +- Typecast fread() return values in gzio.c [Vollant] +- Remove trailing space in minigzip.c outmode (VC++ can't deal with it) +- Fix crc check bug in gzread() after gzungetc() [Heiner] +- Add the deflateTune() function to adjust internal compression parameters +- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack) +- Remove an incorrect assertion in examples/zpipe.c +- Add C++ wrapper in infback9.h [Donais] +- Fix bug in inflateCopy() when decoding fixed codes +- Note in zlib.h how much deflateSetDictionary() actually uses +- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used) +- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer] +- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer] +- Add gzdirect() function to indicate transparent reads +- Update contrib/minizip [Vollant] +- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer] +- Add casts in crc32.c to avoid warnings [Oberhumer] +- Add contrib/masmx64 [Vollant] +- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant] + +Changes in 1.2.2.2 (30 December 2004) +- Replace structure assignments in deflate.c and inflate.c with zmemcpy to + avoid implicit memcpy calls (portability for no-library compilation) +- Increase sprintf() buffer size in gzdopen() to allow for large numbers +- Add INFLATE_STRICT to check distances against zlib header +- Improve WinCE errno handling and comments [Chang] +- Remove comment about no gzip header processing in FAQ +- Add Z_FIXED strategy option to deflateInit2() to force fixed trees +- Add updated make_vms.com [Coghlan], update README +- Create a new "examples" directory, move gzappend.c there, add zpipe.c, + fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html. +- Add FAQ entry and comments in deflate.c on uninitialized memory access +- Add Solaris 9 make options in configure [Gilbert] +- Allow strerror() usage in gzio.c for STDC +- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer] +- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant] +- Use z_off_t for adler32_combine() and crc32_combine() lengths +- Make adler32() much faster for small len +- Use OS_CODE in deflate() default gzip header + +Changes in 1.2.2.1 (31 October 2004) +- Allow inflateSetDictionary() call for raw inflate +- Fix inflate header crc check bug for file names and comments +- Add deflateSetHeader() and gz_header structure for custom gzip headers +- Add inflateGetheader() to retrieve gzip headers +- Add crc32_combine() and adler32_combine() functions +- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list +- Use zstreamp consistently in zlib.h (inflate_back functions) +- Remove GUNZIP condition from definition of inflate_mode in inflate.h + and in contrib/inflate86/inffast.S [Truta, Anderson] +- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson] +- Update projects/README.projects and projects/visualc6 [Truta] +- Update win32/DLL_FAQ.txt [Truta] +- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta] +- Deprecate Z_ASCII; use Z_TEXT instead [Truta] +- Use a new algorithm for setting strm->data_type in trees.c [Truta] +- Do not define an exit() prototype in zutil.c unless DEBUG defined +- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta] +- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate() +- Fix Darwin build version identification [Peterson] + +Changes in 1.2.2 (3 October 2004) +- Update zlib.h comments on gzip in-memory processing +- Set adler to 1 in inflateReset() to support Java test suite [Walles] +- Add contrib/dotzlib [Ravn] +- Update win32/DLL_FAQ.txt [Truta] +- Update contrib/minizip [Vollant] +- Move contrib/visual-basic.txt to old/ [Truta] +- Fix assembler builds in projects/visualc6/ [Truta] + +Changes in 1.2.1.2 (9 September 2004) +- Update INDEX file +- Fix trees.c to update strm->data_type (no one ever noticed!) +- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown] +- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE) +- Add limited multitasking protection to DYNAMIC_CRC_TABLE +- Add NO_vsnprintf for VMS in zutil.h [Mozilla] +- Don't declare strerror() under VMS [Mozilla] +- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize +- Update contrib/ada [Anisimkov] +- Update contrib/minizip [Vollant] +- Fix configure to not hardcode directories for Darwin [Peterson] +- Fix gzio.c to not return error on empty files [Brown] +- Fix indentation; update version in contrib/delphi/ZLib.pas and + contrib/pascal/zlibpas.pas [Truta] +- Update mkasm.bat in contrib/masmx86 [Truta] +- Update contrib/untgz [Truta] +- Add projects/README.projects [Truta] +- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta] +- Update win32/DLL_FAQ.txt [Truta] +- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta] +- Remove an unnecessary assignment to curr in inftrees.c [Truta] +- Add OS/2 to exe builds in configure [Poltorak] +- Remove err dummy parameter in zlib.h [Kientzle] + +Changes in 1.2.1.1 (9 January 2004) +- Update email address in README +- Several FAQ updates +- Fix a big fat bug in inftrees.c that prevented decoding valid + dynamic blocks with only literals and no distance codes -- + Thanks to "Hot Emu" for the bug report and sample file +- Add a note to puff.c on no distance codes case. + +Changes in 1.2.1 (17 November 2003) +- Remove a tab in contrib/gzappend/gzappend.c +- Update some interfaces in contrib for new zlib functions +- Update zlib version number in some contrib entries +- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta] +- Support shared libraries on Hurd and KFreeBSD [Brown] +- Fix error in NO_DIVIDE option of adler32.c + +Changes in 1.2.0.8 (4 November 2003) +- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas +- Add experimental NO_DIVIDE #define in adler32.c + - Possibly faster on some processors (let me know if it is) +- Correct Z_BLOCK to not return on first inflate call if no wrap +- Fix strm->data_type on inflate() return to correctly indicate EOB +- Add deflatePrime() function for appending in the middle of a byte +- Add contrib/gzappend for an example of appending to a stream +- Update win32/DLL_FAQ.txt [Truta] +- Delete Turbo C comment in README [Truta] +- Improve some indentation in zconf.h [Truta] +- Fix infinite loop on bad input in configure script [Church] +- Fix gzeof() for concatenated gzip files [Johnson] +- Add example to contrib/visual-basic.txt [Michael B.] +- Add -p to mkdir's in Makefile.in [vda] +- Fix configure to properly detect presence or lack of printf functions +- Add AS400 support [Monnerat] +- Add a little Cygwin support [Wilson] + +Changes in 1.2.0.7 (21 September 2003) +- Correct some debug formats in contrib/infback9 +- Cast a type in a debug statement in trees.c +- Change search and replace delimiter in configure from % to # [Beebe] +- Update contrib/untgz to 0.2 with various fixes [Truta] +- Add build support for Amiga [Nikl] +- Remove some directories in old that have been updated to 1.2 +- Add dylib building for Mac OS X in configure and Makefile.in +- Remove old distribution stuff from Makefile +- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X +- Update links in README + +Changes in 1.2.0.6 (13 September 2003) +- Minor FAQ updates +- Update contrib/minizip to 1.00 [Vollant] +- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta] +- Update POSTINC comment for 68060 [Nikl] +- Add contrib/infback9 with deflate64 decoding (unsupported) +- For MVS define NO_vsnprintf and undefine FAR [van Burik] +- Add pragma for fdopen on MVS [van Burik] + +Changes in 1.2.0.5 (8 September 2003) +- Add OF to inflateBackEnd() declaration in zlib.h +- Remember start when using gzdopen in the middle of a file +- Use internal off_t counters in gz* functions to properly handle seeks +- Perform more rigorous check for distance-too-far in inffast.c +- Add Z_BLOCK flush option to return from inflate at block boundary +- Set strm->data_type on return from inflate + - Indicate bits unused, if at block boundary, and if in last block +- Replace size_t with ptrdiff_t in crc32.c, and check for correct size +- Add condition so old NO_DEFLATE define still works for compatibility +- FAQ update regarding the Windows DLL [Truta] +- INDEX update: add qnx entry, remove aix entry [Truta] +- Install zlib.3 into mandir [Wilson] +- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta] +- Adapt the zlib interface to the new DLL convention guidelines [Truta] +- Introduce ZLIB_WINAPI macro to allow the export of functions using + the WINAPI calling convention, for Visual Basic [Vollant, Truta] +- Update msdos and win32 scripts and makefiles [Truta] +- Export symbols by name, not by ordinal, in win32/zlib.def [Truta] +- Add contrib/ada [Anisimkov] +- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta] +- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant] +- Add contrib/masm686 [Truta] +- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm + [Truta, Vollant] +- Update contrib/delphi; rename to contrib/pascal; add example [Truta] +- Remove contrib/delphi2; add a new contrib/delphi [Truta] +- Avoid inclusion of the nonstandard in contrib/iostream, + and fix some method prototypes [Truta] +- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip + [Truta] +- Avoid the use of backslash (\) in contrib/minizip [Vollant] +- Fix file time handling in contrib/untgz; update makefiles [Truta] +- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines + [Vollant] +- Remove contrib/vstudio/vc15_16 [Vollant] +- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta] +- Update README.contrib [Truta] +- Invert the assignment order of match_head and s->prev[...] in + INSERT_STRING [Truta] +- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings + [Truta] +- Compare function pointers with 0, not with NULL or Z_NULL [Truta] +- Fix prototype of syncsearch in inflate.c [Truta] +- Introduce ASMINF macro to be enabled when using an ASM implementation + of inflate_fast [Truta] +- Change NO_DEFLATE to NO_GZCOMPRESS [Truta] +- Modify test_gzio in example.c to take a single file name as a + parameter [Truta] +- Exit the example.c program if gzopen fails [Truta] +- Add type casts around strlen in example.c [Truta] +- Remove casting to sizeof in minigzip.c; give a proper type + to the variable compared with SUFFIX_LEN [Truta] +- Update definitions of STDC and STDC99 in zconf.h [Truta] +- Synchronize zconf.h with the new Windows DLL interface [Truta] +- Use SYS16BIT instead of __32BIT__ to distinguish between + 16- and 32-bit platforms [Truta] +- Use far memory allocators in small 16-bit memory models for + Turbo C [Truta] +- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in + zlibCompileFlags [Truta] +- Cygwin has vsnprintf [Wilson] +- In Windows16, OS_CODE is 0, as in MSDOS [Truta] +- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson] + +Changes in 1.2.0.4 (10 August 2003) +- Minor FAQ updates +- Be more strict when checking inflateInit2's windowBits parameter +- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well +- Add gzip wrapper option to deflateInit2 using windowBits +- Add updated QNX rule in configure and qnx directory [Bonnefoy] +- Make inflate distance-too-far checks more rigorous +- Clean up FAR usage in inflate +- Add casting to sizeof() in gzio.c and minigzip.c + +Changes in 1.2.0.3 (19 July 2003) +- Fix silly error in gzungetc() implementation [Vollant] +- Update contrib/minizip and contrib/vstudio [Vollant] +- Fix printf format in example.c +- Correct cdecl support in zconf.in.h [Anisimkov] +- Minor FAQ updates + +Changes in 1.2.0.2 (13 July 2003) +- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons +- Attempt to avoid warnings in crc32.c for pointer-int conversion +- Add AIX to configure, remove aix directory [Bakker] +- Add some casts to minigzip.c +- Improve checking after insecure sprintf() or vsprintf() calls +- Remove #elif's from crc32.c +- Change leave label to inf_leave in inflate.c and infback.c to avoid + library conflicts +- Remove inflate gzip decoding by default--only enable gzip decoding by + special request for stricter backward compatibility +- Add zlibCompileFlags() function to return compilation information +- More typecasting in deflate.c to avoid warnings +- Remove leading underscore from _Capital #defines [Truta] +- Fix configure to link shared library when testing +- Add some Windows CE target adjustments [Mai] +- Remove #define ZLIB_DLL in zconf.h [Vollant] +- Add zlib.3 [Rodgers] +- Update RFC URL in deflate.c and algorithm.txt [Mai] +- Add zlib_dll_FAQ.txt to contrib [Truta] +- Add UL to some constants [Truta] +- Update minizip and vstudio [Vollant] +- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h +- Expand use of NO_DUMMY_DECL to avoid all dummy structures +- Added iostream3 to contrib [Schwardt] +- Replace rewind() with fseek() for WinCE [Truta] +- Improve setting of zlib format compression level flags + - Report 0 for huffman and rle strategies and for level == 0 or 1 + - Report 2 only for level == 6 +- Only deal with 64K limit when necessary at compile time [Truta] +- Allow TOO_FAR check to be turned off at compile time [Truta] +- Add gzclearerr() function [Souza] +- Add gzungetc() function + +Changes in 1.2.0.1 (17 March 2003) +- Add Z_RLE strategy for run-length encoding [Truta] + - When Z_RLE requested, restrict matches to distance one + - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE +- Correct FASTEST compilation to allow level == 0 +- Clean up what gets compiled for FASTEST +- Incorporate changes to zconf.in.h [Vollant] + - Refine detection of Turbo C need for dummy returns + - Refine ZLIB_DLL compilation + - Include additional header file on VMS for off_t typedef +- Try to use _vsnprintf where it supplants vsprintf [Vollant] +- Add some casts in inffast.c +- Enchance comments in zlib.h on what happens if gzprintf() tries to + write more than 4095 bytes before compression +- Remove unused state from inflateBackEnd() +- Remove exit(0) from minigzip.c, example.c +- Get rid of all those darn tabs +- Add "check" target to Makefile.in that does the same thing as "test" +- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in +- Update contrib/inflate86 [Anderson] +- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant] +- Add msdos and win32 directories with makefiles [Truta] +- More additions and improvements to the FAQ + +Changes in 1.2.0 (9 March 2003) +- New and improved inflate code + - About 20% faster + - Does not allocate 32K window unless and until needed + - Automatically detects and decompresses gzip streams + - Raw inflate no longer needs an extra dummy byte at end + - Added inflateBack functions using a callback interface--even faster + than inflate, useful for file utilities (gzip, zip) + - Added inflateCopy() function to record state for random access on + externally generated deflate streams (e.g. in gzip files) + - More readable code (I hope) +- New and improved crc32() + - About 50% faster, thanks to suggestions from Rodney Brown +- Add deflateBound() and compressBound() functions +- Fix memory leak in deflateInit2() +- Permit setting dictionary for raw deflate (for parallel deflate) +- Fix const declaration for gzwrite() +- Check for some malloc() failures in gzio.c +- Fix bug in gzopen() on single-byte file 0x1f +- Fix bug in gzread() on concatenated file with 0x1f at end of buffer + and next buffer doesn't start with 0x8b +- Fix uncompress() to return Z_DATA_ERROR on truncated input +- Free memory at end of example.c +- Remove MAX #define in trees.c (conflicted with some libraries) +- Fix static const's in deflate.c, gzio.c, and zutil.[ch] +- Declare malloc() and free() in gzio.c if STDC not defined +- Use malloc() instead of calloc() in zutil.c if int big enough +- Define STDC for AIX +- Add aix/ with approach for compiling shared library on AIX +- Add HP-UX support for shared libraries in configure +- Add OpenUNIX support for shared libraries in configure +- Use $cc instead of gcc to build shared library +- Make prefix directory if needed when installing +- Correct Macintosh avoidance of typedef Byte in zconf.h +- Correct Turbo C memory allocation when under Linux +- Use libz.a instead of -lz in Makefile (assure use of compiled library) +- Update configure to check for snprintf or vsnprintf functions and their + return value, warn during make if using an insecure function +- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that + is lost when library is used--resolution is to build new zconf.h +- Documentation improvements (in zlib.h): + - Document raw deflate and inflate + - Update RFCs URL + - Point out that zlib and gzip formats are different + - Note that Z_BUF_ERROR is not fatal + - Document string limit for gzprintf() and possible buffer overflow + - Note requirement on avail_out when flushing + - Note permitted values of flush parameter of inflate() +- Add some FAQs (and even answers) to the FAQ +- Add contrib/inflate86/ for x86 faster inflate +- Add contrib/blast/ for PKWare Data Compression Library decompression +- Add contrib/puff/ simple inflate for deflate format description + +Changes in 1.1.4 (11 March 2002) +- ZFREE was repeated on same allocation on some error conditions. + This creates a security problem described in + http://www.zlib.org/advisory-2002-03-11.txt +- Returned incorrect error (Z_MEM_ERROR) on some invalid data +- Avoid accesses before window for invalid distances with inflate window + less than 32K. +- force windowBits > 8 to avoid a bug in the encoder for a window size + of 256 bytes. (A complete fix will be available in 1.1.5). + +Changes in 1.1.3 (9 July 1998) +- fix "an inflate input buffer bug that shows up on rare but persistent + occasions" (Mark) +- fix gzread and gztell for concatenated .gz files (Didier Le Botlan) +- fix gzseek(..., SEEK_SET) in write mode +- fix crc check after a gzeek (Frank Faubert) +- fix miniunzip when the last entry in a zip file is itself a zip file + (J Lillge) +- add contrib/asm586 and contrib/asm686 (Brian Raiter) + See http://www.muppetlabs.com/~breadbox/software/assembly.html +- add support for Delphi 3 in contrib/delphi (Bob Dellaca) +- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti) +- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren) +- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks) +- added a FAQ file + +- Support gzdopen on Mac with Metrowerks (Jason Linhart) +- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart) +- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young) +- avoid some warnings with Borland C (Tom Tanner) +- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant) +- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant) +- allow several arguments to configure (Tim Mooney, Frodo Looijaard) +- use libdir and includedir in Makefile.in (Tim Mooney) +- support shared libraries on OSF1 V4 (Tim Mooney) +- remove so_locations in "make clean" (Tim Mooney) +- fix maketree.c compilation error (Glenn, Mark) +- Python interface to zlib now in Python 1.5 (Jeremy Hylton) +- new Makefile.riscos (Rich Walker) +- initialize static descriptors in trees.c for embedded targets (Nick Smith) +- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith) +- add the OS/2 files in Makefile.in too (Andrew Zabolotny) +- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane) +- fix maketree.c to allow clean compilation of inffixed.h (Mark) +- fix parameter check in deflateCopy (Gunther Nikl) +- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler) +- Many portability patches by Christian Spieler: + . zutil.c, zutil.h: added "const" for zmem* + . Make_vms.com: fixed some typos + . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists + . msdos/Makefile.msc: remove "default rtl link library" info from obj files + . msdos/Makefile.*: use model-dependent name for the built zlib library + . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc: + new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT) +- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane) +- replace __far with _far for better portability (Christian Spieler, Tom Lane) +- fix test for errno.h in configure (Tim Newsham) + +Changes in 1.1.2 (19 March 98) +- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant) + See http://www.winimage.com/zLibDll/unzip.html +- preinitialize the inflate tables for fixed codes, to make the code + completely thread safe (Mark) +- some simplifications and slight speed-up to the inflate code (Mark) +- fix gzeof on non-compressed files (Allan Schrum) +- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs) +- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn) +- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny) +- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori) +- do not wrap extern "C" around system includes (Tom Lane) +- mention zlib binding for TCL in README (Andreas Kupries) +- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert) +- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson) +- allow "configure --prefix $HOME" (Tim Mooney) +- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson) +- move Makefile.sas to amiga/Makefile.sas + +Changes in 1.1.1 (27 Feb 98) +- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson) +- remove block truncation heuristic which had very marginal effect for zlib + (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the + compression ratio on some files. This also allows inlining _tr_tally for + matches in deflate_slow. +- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier) + +Changes in 1.1.0 (24 Feb 98) +- do not return STREAM_END prematurely in inflate (John Bowler) +- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler) +- compile with -DFASTEST to get compression code optimized for speed only +- in minigzip, try mmap'ing the input file first (Miguel Albrecht) +- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain + on Sun but significant on HP) + +- add a pointer to experimental unzip library in README (Gilles Vollant) +- initialize variable gcc in configure (Chris Herborth) + +Changes in 1.0.9 (17 Feb 1998) +- added gzputs and gzgets functions +- do not clear eof flag in gzseek (Mark Diekhans) +- fix gzseek for files in transparent mode (Mark Diekhans) +- do not assume that vsprintf returns the number of bytes written (Jens Krinke) +- replace EXPORT with ZEXPORT to avoid conflict with other programs +- added compress2 in zconf.h, zlib.def, zlib.dnt +- new asm code from Gilles Vollant in contrib/asm386 +- simplify the inflate code (Mark): + . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new() + . ZALLOC the length list in inflate_trees_fixed() instead of using stack + . ZALLOC the value area for huft_build() instead of using stack + . Simplify Z_FINISH check in inflate() + +- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8 +- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi) +- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with + the declaration of FAR (Gilles VOllant) +- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann) +- read_buf buf parameter of type Bytef* instead of charf* +- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout) +- do not redeclare unlink in minigzip.c for WIN32 (John Bowler) +- fix check for presence of directories in "make install" (Ian Willis) + +Changes in 1.0.8 (27 Jan 1998) +- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant) +- fix gzgetc and gzputc for big endian systems (Markus Oberhumer) +- added compress2() to allow setting the compression level +- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong) +- use constant arrays for the static trees in trees.c instead of computing + them at run time (thanks to Ken Raeburn for this suggestion). To create + trees.h, compile with GEN_TREES_H and run "make test". +- check return code of example in "make test" and display result +- pass minigzip command line options to file_compress +- simplifying code of inflateSync to avoid gcc 2.8 bug + +- support CC="gcc -Wall" in configure -s (QingLong) +- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn) +- fix test for shared library support to avoid compiler warnings +- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant) +- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit) +- do not use fdopen for Metrowerks on Mac (Brad Pettit)) +- add checks for gzputc and gzputc in example.c +- avoid warnings in gzio.c and deflate.c (Andreas Kleinert) +- use const for the CRC table (Ken Raeburn) +- fixed "make uninstall" for shared libraries +- use Tracev instead of Trace in infblock.c +- in example.c use correct compressed length for test_sync +- suppress +vnocompatwarnings in configure for HPUX (not always supported) + +Changes in 1.0.7 (20 Jan 1998) +- fix gzseek which was broken in write mode +- return error for gzseek to negative absolute position +- fix configure for Linux (Chun-Chung Chen) +- increase stack space for MSC (Tim Wegner) +- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant) +- define EXPORTVA for gzprintf (Gilles Vollant) +- added man page zlib.3 (Rick Rodgers) +- for contrib/untgz, fix makedir() and improve Makefile + +- check gzseek in write mode in example.c +- allocate extra buffer for seeks only if gzseek is actually called +- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant) +- add inflateSyncPoint in zconf.h +- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def + +Changes in 1.0.6 (19 Jan 1998) +- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and + gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code) +- Fix a deflate bug occurring only with compression level 0 (thanks to + Andy Buckler for finding this one). +- In minigzip, pass transparently also the first byte for .Z files. +- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress() +- check Z_FINISH in inflate (thanks to Marc Schluper) +- Implement deflateCopy (thanks to Adam Costello) +- make static libraries by default in configure, add --shared option. +- move MSDOS or Windows specific files to directory msdos +- suppress the notion of partial flush to simplify the interface + (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4) +- suppress history buffer provided by application to simplify the interface + (this feature was not implemented anyway in 1.0.4) +- next_in and avail_in must be initialized before calling inflateInit or + inflateInit2 +- add EXPORT in all exported functions (for Windows DLL) +- added Makefile.nt (thanks to Stephen Williams) +- added the unsupported "contrib" directory: + contrib/asm386/ by Gilles Vollant + 386 asm code replacing longest_match(). + contrib/iostream/ by Kevin Ruland + A C++ I/O streams interface to the zlib gz* functions + contrib/iostream2/ by Tyge Løvset + Another C++ I/O streams interface + contrib/untgz/ by "Pedro A. Aranda Guti\irrez" + A very simple tar.gz file extractor using zlib + contrib/visual-basic.txt by Carlos Rios + How to use compress(), uncompress() and the gz* functions from VB. +- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression + level) in minigzip (thanks to Tom Lane) + +- use const for rommable constants in deflate +- added test for gzseek and gztell in example.c +- add undocumented function inflateSyncPoint() (hack for Paul Mackerras) +- add undocumented function zError to convert error code to string + (for Tim Smithers) +- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code. +- Use default memcpy for Symantec MSDOS compiler. +- Add EXPORT keyword for check_func (needed for Windows DLL) +- add current directory to LD_LIBRARY_PATH for "make test" +- create also a link for libz.so.1 +- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura) +- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX) +- added -soname for Linux in configure (Chun-Chung Chen, +- assign numbers to the exported functions in zlib.def (for Windows DLL) +- add advice in zlib.h for best usage of deflateSetDictionary +- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn) +- allow compilation with ANSI keywords only enabled for TurboC in large model +- avoid "versionString"[0] (Borland bug) +- add NEED_DUMMY_RETURN for Borland +- use variable z_verbose for tracing in debug mode (L. Peter Deutsch). +- allow compilation with CC +- defined STDC for OS/2 (David Charlap) +- limit external names to 8 chars for MVS (Thomas Lund) +- in minigzip.c, use static buffers only for 16-bit systems +- fix suffix check for "minigzip -d foo.gz" +- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee) +- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau) +- added makelcc.bat for lcc-win32 (Tom St Denis) +- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe) +- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion. +- check for unistd.h in configure (for off_t) +- remove useless check parameter in inflate_blocks_free +- avoid useless assignment of s->check to itself in inflate_blocks_new +- do not flush twice in gzclose (thanks to Ken Raeburn) +- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h +- use NO_ERRNO_H instead of enumeration of operating systems with errno.h +- work around buggy fclose on pipes for HP/UX +- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson) +- fix configure if CC is already equal to gcc + +Changes in 1.0.5 (3 Jan 98) +- Fix inflate to terminate gracefully when fed corrupted or invalid data +- Use const for rommable constants in inflate +- Eliminate memory leaks on error conditions in inflate +- Removed some vestigial code in inflate +- Update web address in README + +Changes in 1.0.4 (24 Jul 96) +- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF + bit, so the decompressor could decompress all the correct data but went + on to attempt decompressing extra garbage data. This affected minigzip too. +- zlibVersion and gzerror return const char* (needed for DLL) +- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno) +- use z_error only for DEBUG (avoid problem with DLLs) + +Changes in 1.0.3 (2 Jul 96) +- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS + small and medium models; this makes the library incompatible with previous + versions for these models. (No effect in large model or on other systems.) +- return OK instead of BUF_ERROR if previous deflate call returned with + avail_out as zero but there is nothing to do +- added memcmp for non STDC compilers +- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly) +- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO) +- better check for 16-bit mode MSC (avoids problem with Symantec) + +Changes in 1.0.2 (23 May 96) +- added Windows DLL support +- added a function zlibVersion (for the DLL support) +- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model) +- Bytef is define's instead of typedef'd only for Borland C +- avoid reading uninitialized memory in example.c +- mention in README that the zlib format is now RFC1950 +- updated Makefile.dj2 +- added algorithm.doc + +Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion] +- fix array overlay in deflate.c which sometimes caused bad compressed data +- fix inflate bug with empty stored block +- fix MSDOS medium model which was broken in 0.99 +- fix deflateParams() which could generated bad compressed data. +- Bytef is define'd instead of typedef'ed (work around Borland bug) +- added an INDEX file +- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32), + Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas) +- speed up adler32 for modern machines without auto-increment +- added -ansi for IRIX in configure +- static_init_done in trees.c is an int +- define unlink as delete for VMS +- fix configure for QNX +- add configure branch for SCO and HPUX +- avoid many warnings (unused variables, dead assignments, etc...) +- no fdopen for BeOS +- fix the Watcom fix for 32 bit mode (define FAR as empty) +- removed redefinition of Byte for MKWERKS +- work around an MWKERKS bug (incorrect merge of all .h files) + +Changes in 0.99 (27 Jan 96) +- allow preset dictionary shared between compressor and decompressor +- allow compression level 0 (no compression) +- add deflateParams in zlib.h: allow dynamic change of compression level + and compression strategy. +- test large buffers and deflateParams in example.c +- add optional "configure" to build zlib as a shared library +- suppress Makefile.qnx, use configure instead +- fixed deflate for 64-bit systems (detected on Cray) +- fixed inflate_blocks for 64-bit systems (detected on Alpha) +- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2) +- always return Z_BUF_ERROR when deflate() has nothing to do +- deflateInit and inflateInit are now macros to allow version checking +- prefix all global functions and types with z_ with -DZ_PREFIX +- make falloc completely reentrant (inftrees.c) +- fixed very unlikely race condition in ct_static_init +- free in reverse order of allocation to help memory manager +- use zlib-1.0/* instead of zlib/* inside the tar.gz +- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith + -Wconversion -Wstrict-prototypes -Wmissing-prototypes" +- allow gzread on concatenated .gz files +- deflateEnd now returns Z_DATA_ERROR if it was premature +- deflate is finally (?) fully deterministic (no matches beyond end of input) +- Document Z_SYNC_FLUSH +- add uninstall in Makefile +- Check for __cpluplus in zlib.h +- Better test in ct_align for partial flush +- avoid harmless warnings for Borland C++ +- initialize hash_head in deflate.c +- avoid warning on fdopen (gzio.c) for HP cc -Aa +- include stdlib.h for STDC compilers +- include errno.h for Cray +- ignore error if ranlib doesn't exist +- call ranlib twice for NeXTSTEP +- use exec_prefix instead of prefix for libz.a +- renamed ct_* as _tr_* to avoid conflict with applications +- clear z->msg in inflateInit2 before any error return +- initialize opaque in example.c, gzio.c, deflate.c and inflate.c +- fixed typo in zconf.h (_GNUC__ => __GNUC__) +- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode) +- fix typo in Make_vms.com (f$trnlnm -> f$getsyi) +- in fcalloc, normalize pointer if size > 65520 bytes +- don't use special fcalloc for 32 bit Borland C++ +- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc... +- use Z_BINARY instead of BINARY +- document that gzclose after gzdopen will close the file +- allow "a" as mode in gzopen. +- fix error checking in gzread +- allow skipping .gz extra-field on pipes +- added reference to Perl interface in README +- put the crc table in FAR data (I dislike more and more the medium model :) +- added get_crc_table +- added a dimension to all arrays (Borland C can't count). +- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast +- guard against multiple inclusion of *.h (for precompiled header on Mac) +- Watcom C pretends to be Microsoft C small model even in 32 bit mode. +- don't use unsized arrays to avoid silly warnings by Visual C++: + warning C4746: 'inflate_mask' : unsized array treated as '__far' + (what's wrong with far data in far model?). +- define enum out of inflate_blocks_state to allow compilation with C++ + +Changes in 0.95 (16 Aug 95) +- fix MSDOS small and medium model (now easier to adapt to any compiler) +- inlined send_bits +- fix the final (:-) bug for deflate with flush (output was correct but + not completely flushed in rare occasions). +- default window size is same for compression and decompression + (it's now sufficient to set MAX_WBITS in zconf.h). +- voidp -> voidpf and voidnp -> voidp (for consistency with other + typedefs and because voidnp was not near in large model). + +Changes in 0.94 (13 Aug 95) +- support MSDOS medium model +- fix deflate with flush (could sometimes generate bad output) +- fix deflateReset (zlib header was incorrectly suppressed) +- added support for VMS +- allow a compression level in gzopen() +- gzflush now calls fflush +- For deflate with flush, flush even if no more input is provided. +- rename libgz.a as libz.a +- avoid complex expression in infcodes.c triggering Turbo C bug +- work around a problem with gcc on Alpha (in INSERT_STRING) +- don't use inline functions (problem with some gcc versions) +- allow renaming of Byte, uInt, etc... with #define. +- avoid warning about (unused) pointer before start of array in deflate.c +- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c +- avoid reserved word 'new' in trees.c + +Changes in 0.93 (25 June 95) +- temporarily disable inline functions +- make deflate deterministic +- give enough lookahead for PARTIAL_FLUSH +- Set binary mode for stdin/stdout in minigzip.c for OS/2 +- don't even use signed char in inflate (not portable enough) +- fix inflate memory leak for segmented architectures + +Changes in 0.92 (3 May 95) +- don't assume that char is signed (problem on SGI) +- Clear bit buffer when starting a stored block +- no memcpy on Pyramid +- suppressed inftest.c +- optimized fill_window, put longest_match inline for gcc +- optimized inflate on stored blocks. +- untabify all sources to simplify patches + +Changes in 0.91 (2 May 95) +- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h +- Document the memory requirements in zconf.h +- added "make install" +- fix sync search logic in inflateSync +- deflate(Z_FULL_FLUSH) now works even if output buffer too short +- after inflateSync, don't scare people with just "lo world" +- added support for DJGPP + +Changes in 0.9 (1 May 95) +- don't assume that zalloc clears the allocated memory (the TurboC bug + was Mark's bug after all :) +- let again gzread copy uncompressed data unchanged (was working in 0.71) +- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented +- added a test of inflateSync in example.c +- moved MAX_WBITS to zconf.h because users might want to change that. +- document explicitly that zalloc(64K) on MSDOS must return a normalized + pointer (zero offset) +- added Makefiles for Microsoft C, Turbo C, Borland C++ +- faster crc32() + +Changes in 0.8 (29 April 95) +- added fast inflate (inffast.c) +- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this + is incompatible with previous versions of zlib which returned Z_OK. +- work around a TurboC compiler bug (bad code for b << 0, see infutil.h) + (actually that was not a compiler bug, see 0.81 above) +- gzread no longer reads one extra byte in certain cases +- In gzio destroy(), don't reference a freed structure +- avoid many warnings for MSDOS +- avoid the ERROR symbol which is used by MS Windows + +Changes in 0.71 (14 April 95) +- Fixed more MSDOS compilation problems :( There is still a bug with + TurboC large model. + +Changes in 0.7 (14 April 95) +- Added full inflate support. +- Simplified the crc32() interface. The pre- and post-conditioning + (one's complement) is now done inside crc32(). WARNING: this is + incompatible with previous versions; see zlib.h for the new usage. + +Changes in 0.61 (12 April 95) +- workaround for a bug in TurboC. example and minigzip now work on MSDOS. + +Changes in 0.6 (11 April 95) +- added minigzip.c +- added gzdopen to reopen a file descriptor as gzFile +- added transparent reading of non-gziped files in gzread. +- fixed bug in gzread (don't read crc as data) +- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose). +- don't allocate big arrays in the stack (for MSDOS) +- fix some MSDOS compilation problems + +Changes in 0.5: +- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but + not yet Z_FULL_FLUSH. +- support decompression but only in a single step (forced Z_FINISH) +- added opaque object for zalloc and zfree. +- added deflateReset and inflateReset +- added a variable zlib_version for consistency checking. +- renamed the 'filter' parameter of deflateInit2 as 'strategy'. + Added Z_FILTERED and Z_HUFFMAN_ONLY constants. + +Changes in 0.4: +- avoid "zip" everywhere, use zlib instead of ziplib. +- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush + if compression method == 8. +- added adler32 and crc32 +- renamed deflateOptions as deflateInit2, call one or the other but not both +- added the method parameter for deflateInit2. +- added inflateInit2 +- simplied considerably deflateInit and inflateInit by not supporting + user-provided history buffer. This is supported only in deflateInit2 + and inflateInit2. + +Changes in 0.3: +- prefix all macro names with Z_ +- use Z_FINISH instead of deflateEnd to finish compression. +- added Z_HUFFMAN_ONLY +- added gzerror() diff --git a/src/SDL2/external/zlib-1.2.8/FAQ b/src/SDL2/external/zlib-1.2.8/FAQ new file mode 100644 index 000000000..99b7cf92e --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/FAQ @@ -0,0 +1,368 @@ + + Frequently Asked Questions about zlib + + +If your question is not there, please check the zlib home page +http://zlib.net/ which may have more recent information. +The lastest zlib FAQ is at http://zlib.net/zlib_faq.html + + + 1. Is zlib Y2K-compliant? + + Yes. zlib doesn't handle dates. + + 2. Where can I get a Windows DLL version? + + The zlib sources can be compiled without change to produce a DLL. See the + file win32/DLL_FAQ.txt in the zlib distribution. Pointers to the + precompiled DLL are found in the zlib web site at http://zlib.net/ . + + 3. Where can I get a Visual Basic interface to zlib? + + See + * http://marknelson.us/1997/01/01/zlib-engine/ + * win32/DLL_FAQ.txt in the zlib distribution + + 4. compress() returns Z_BUF_ERROR. + + Make sure that before the call of compress(), the length of the compressed + buffer is equal to the available size of the compressed buffer and not + zero. For Visual Basic, check that this parameter is passed by reference + ("as any"), not by value ("as long"). + + 5. deflate() or inflate() returns Z_BUF_ERROR. + + Before making the call, make sure that avail_in and avail_out are not zero. + When setting the parameter flush equal to Z_FINISH, also make sure that + avail_out is big enough to allow processing all pending input. Note that a + Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be + made with more input or output space. A Z_BUF_ERROR may in fact be + unavoidable depending on how the functions are used, since it is not + possible to tell whether or not there is more output pending when + strm.avail_out returns with zero. See http://zlib.net/zlib_how.html for a + heavily annotated example. + + 6. Where's the zlib documentation (man pages, etc.)? + + It's in zlib.h . Examples of zlib usage are in the files test/example.c + and test/minigzip.c, with more in examples/ . + + 7. Why don't you use GNU autoconf or libtool or ...? + + Because we would like to keep zlib as a very small and simple package. + zlib is rather portable and doesn't need much configuration. + + 8. I found a bug in zlib. + + Most of the time, such problems are due to an incorrect usage of zlib. + Please try to reproduce the problem with a small program and send the + corresponding source to us at zlib@gzip.org . Do not send multi-megabyte + data files without prior agreement. + + 9. Why do I get "undefined reference to gzputc"? + + If "make test" produces something like + + example.o(.text+0x154): undefined reference to `gzputc' + + check that you don't have old files libz.* in /usr/lib, /usr/local/lib or + /usr/X11R6/lib. Remove any old versions, then do "make install". + +10. I need a Delphi interface to zlib. + + See the contrib/delphi directory in the zlib distribution. + +11. Can zlib handle .zip archives? + + Not by itself, no. See the directory contrib/minizip in the zlib + distribution. + +12. Can zlib handle .Z files? + + No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt + the code of uncompress on your own. + +13. How can I make a Unix shared library? + + By default a shared (and a static) library is built for Unix. So: + + make distclean + ./configure + make + +14. How do I install a shared zlib library on Unix? + + After the above, then: + + make install + + However, many flavors of Unix come with a shared zlib already installed. + Before going to the trouble of compiling a shared version of zlib and + trying to install it, you may want to check if it's already there! If you + can #include , it's there. The -lz option will probably link to + it. You can check the version at the top of zlib.h or with the + ZLIB_VERSION symbol defined in zlib.h . + +15. I have a question about OttoPDF. + + We are not the authors of OttoPDF. The real author is on the OttoPDF web + site: Joel Hainley, jhainley@myndkryme.com. + +16. Can zlib decode Flate data in an Adobe PDF file? + + Yes. See http://www.pdflib.com/ . To modify PDF forms, see + http://sourceforge.net/projects/acroformtool/ . + +17. Why am I getting this "register_frame_info not found" error on Solaris? + + After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib + generates an error such as: + + ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so: + symbol __register_frame_info: referenced symbol not found + + The symbol __register_frame_info is not part of zlib, it is generated by + the C compiler (cc or gcc). You must recompile applications using zlib + which have this problem. This problem is specific to Solaris. See + http://www.sunfreeware.com for Solaris versions of zlib and applications + using zlib. + +18. Why does gzip give an error on a file I make with compress/deflate? + + The compress and deflate functions produce data in the zlib format, which + is different and incompatible with the gzip format. The gz* functions in + zlib on the other hand use the gzip format. Both the zlib and gzip formats + use the same compressed data format internally, but have different headers + and trailers around the compressed data. + +19. Ok, so why are there two different formats? + + The gzip format was designed to retain the directory information about a + single file, such as the name and last modification date. The zlib format + on the other hand was designed for in-memory and communication channel + applications, and has a much more compact header and trailer and uses a + faster integrity check than gzip. + +20. Well that's nice, but how do I make a gzip file in memory? + + You can request that deflate write the gzip format instead of the zlib + format using deflateInit2(). You can also request that inflate decode the + gzip format using inflateInit2(). Read zlib.h for more details. + +21. Is zlib thread-safe? + + Yes. However any library routines that zlib uses and any application- + provided memory allocation routines must also be thread-safe. zlib's gz* + functions use stdio library routines, and most of zlib's functions use the + library memory allocation routines by default. zlib's *Init* functions + allow for the application to provide custom memory allocation routines. + + Of course, you should only operate on any given zlib or gzip stream from a + single thread at a time. + +22. Can I use zlib in my commercial application? + + Yes. Please read the license in zlib.h. + +23. Is zlib under the GNU license? + + No. Please read the license in zlib.h. + +24. The license says that altered source versions must be "plainly marked". So + what exactly do I need to do to meet that requirement? + + You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In + particular, the final version number needs to be changed to "f", and an + identification string should be appended to ZLIB_VERSION. Version numbers + x.x.x.f are reserved for modifications to zlib by others than the zlib + maintainers. For example, if the version of the base zlib you are altering + is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and + ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also + update the version strings in deflate.c and inftrees.c. + + For altered source distributions, you should also note the origin and + nature of the changes in zlib.h, as well as in ChangeLog and README, along + with the dates of the alterations. The origin should include at least your + name (or your company's name), and an email address to contact for help or + issues with the library. + + Note that distributing a compiled zlib library along with zlib.h and + zconf.h is also a source distribution, and so you should change + ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes + in zlib.h as you would for a full source distribution. + +25. Will zlib work on a big-endian or little-endian architecture, and can I + exchange compressed data between them? + + Yes and yes. + +26. Will zlib work on a 64-bit machine? + + Yes. It has been tested on 64-bit machines, and has no dependence on any + data types being limited to 32-bits in length. If you have any + difficulties, please provide a complete problem report to zlib@gzip.org + +27. Will zlib decompress data from the PKWare Data Compression Library? + + No. The PKWare DCL uses a completely different compressed data format than + does PKZIP and zlib. However, you can look in zlib's contrib/blast + directory for a possible solution to your problem. + +28. Can I access data randomly in a compressed stream? + + No, not without some preparation. If when compressing you periodically use + Z_FULL_FLUSH, carefully write all the pending data at those points, and + keep an index of those locations, then you can start decompression at those + points. You have to be careful to not use Z_FULL_FLUSH too often, since it + can significantly degrade compression. Alternatively, you can scan a + deflate stream once to generate an index, and then use that index for + random access. See examples/zran.c . + +29. Does zlib work on MVS, OS/390, CICS, etc.? + + It has in the past, but we have not heard of any recent evidence. There + were working ports of zlib 1.1.4 to MVS, but those links no longer work. + If you know of recent, successful applications of zlib on these operating + systems, please let us know. Thanks. + +30. Is there some simpler, easier to read version of inflate I can look at to + understand the deflate format? + + First off, you should read RFC 1951. Second, yes. Look in zlib's + contrib/puff directory. + +31. Does zlib infringe on any patents? + + As far as we know, no. In fact, that was originally the whole point behind + zlib. Look here for some more information: + + http://www.gzip.org/#faq11 + +32. Can zlib work with greater than 4 GB of data? + + Yes. inflate() and deflate() will process any amount of data correctly. + Each call of inflate() or deflate() is limited to input and output chunks + of the maximum value that can be stored in the compiler's "unsigned int" + type, but there is no limit to the number of chunks. Note however that the + strm.total_in and strm_total_out counters may be limited to 4 GB. These + counters are provided as a convenience and are not used internally by + inflate() or deflate(). The application can easily set up its own counters + updated after each call of inflate() or deflate() to count beyond 4 GB. + compress() and uncompress() may be limited to 4 GB, since they operate in a + single call. gzseek() and gztell() may be limited to 4 GB depending on how + zlib is compiled. See the zlibCompileFlags() function in zlib.h. + + The word "may" appears several times above since there is a 4 GB limit only + if the compiler's "long" type is 32 bits. If the compiler's "long" type is + 64 bits, then the limit is 16 exabytes. + +33. Does zlib have any security vulnerabilities? + + The only one that we are aware of is potentially in gzprintf(). If zlib is + compiled to use sprintf() or vsprintf(), then there is no protection + against a buffer overflow of an 8K string space (or other value as set by + gzbuffer()), other than the caller of gzprintf() assuring that the output + will not exceed 8K. On the other hand, if zlib is compiled to use + snprintf() or vsnprintf(), which should normally be the case, then there is + no vulnerability. The ./configure script will display warnings if an + insecure variation of sprintf() will be used by gzprintf(). Also the + zlibCompileFlags() function will return information on what variant of + sprintf() is used by gzprintf(). + + If you don't have snprintf() or vsnprintf() and would like one, you can + find a portable implementation here: + + http://www.ijs.si/software/snprintf/ + + Note that you should be using the most recent version of zlib. Versions + 1.1.3 and before were subject to a double-free vulnerability, and versions + 1.2.1 and 1.2.2 were subject to an access exception when decompressing + invalid compressed data. + +34. Is there a Java version of zlib? + + Probably what you want is to use zlib in Java. zlib is already included + as part of the Java SDK in the java.util.zip package. If you really want + a version of zlib written in the Java language, look on the zlib home + page for links: http://zlib.net/ . + +35. I get this or that compiler or source-code scanner warning when I crank it + up to maximally-pedantic. Can't you guys write proper code? + + Many years ago, we gave up attempting to avoid warnings on every compiler + in the universe. It just got to be a waste of time, and some compilers + were downright silly as well as contradicted each other. So now, we simply + make sure that the code always works. + +36. Valgrind (or some similar memory access checker) says that deflate is + performing a conditional jump that depends on an uninitialized value. + Isn't that a bug? + + No. That is intentional for performance reasons, and the output of deflate + is not affected. This only started showing up recently since zlib 1.2.x + uses malloc() by default for allocations, whereas earlier versions used + calloc(), which zeros out the allocated memory. Even though the code was + correct, versions 1.2.4 and later was changed to not stimulate these + checkers. + +37. Will zlib read the (insert any ancient or arcane format here) compressed + data format? + + Probably not. Look in the comp.compression FAQ for pointers to various + formats and associated software. + +38. How can I encrypt/decrypt zip files with zlib? + + zlib doesn't support encryption. The original PKZIP encryption is very + weak and can be broken with freely available programs. To get strong + encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib + compression. For PKZIP compatible "encryption", look at + http://www.info-zip.org/ + +39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings? + + "gzip" is the gzip format, and "deflate" is the zlib format. They should + probably have called the second one "zlib" instead to avoid confusion with + the raw deflate compressed data format. While the HTTP 1.1 RFC 2616 + correctly points to the zlib specification in RFC 1950 for the "deflate" + transfer encoding, there have been reports of servers and browsers that + incorrectly produce or expect raw deflate data per the deflate + specification in RFC 1951, most notably Microsoft. So even though the + "deflate" transfer encoding using the zlib format would be the more + efficient approach (and in fact exactly what the zlib format was designed + for), using the "gzip" transfer encoding is probably more reliable due to + an unfortunate choice of name on the part of the HTTP 1.1 authors. + + Bottom line: use the gzip format for HTTP 1.1 encoding. + +40. Does zlib support the new "Deflate64" format introduced by PKWare? + + No. PKWare has apparently decided to keep that format proprietary, since + they have not documented it as they have previous compression formats. In + any case, the compression improvements are so modest compared to other more + modern approaches, that it's not worth the effort to implement. + +41. I'm having a problem with the zip functions in zlib, can you help? + + There are no zip functions in zlib. You are probably using minizip by + Giles Vollant, which is found in the contrib directory of zlib. It is not + part of zlib. In fact none of the stuff in contrib is part of zlib. The + files in there are not supported by the zlib authors. You need to contact + the authors of the respective contribution for help. + +42. The match.asm code in contrib is under the GNU General Public License. + Since it's part of zlib, doesn't that mean that all of zlib falls under the + GNU GPL? + + No. The files in contrib are not part of zlib. They were contributed by + other authors and are provided as a convenience to the user within the zlib + distribution. Each item in contrib has its own license. + +43. Is zlib subject to export controls? What is its ECCN? + + zlib is not subject to export controls, and so is classified as EAR99. + +44. Can you please sign these lengthy legal documents and fax them back to us + so that we can use your software in our product? + + No. Go away. Shoo. diff --git a/src/SDL2/external/zlib-1.2.8/INDEX b/src/SDL2/external/zlib-1.2.8/INDEX new file mode 100644 index 000000000..2ba064120 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/INDEX @@ -0,0 +1,68 @@ +CMakeLists.txt cmake build file +ChangeLog history of changes +FAQ Frequently Asked Questions about zlib +INDEX this file +Makefile dummy Makefile that tells you to ./configure +Makefile.in template for Unix Makefile +README guess what +configure configure script for Unix +make_vms.com makefile for VMS +test/example.c zlib usages examples for build testing +test/minigzip.c minimal gzip-like functionality for build testing +test/infcover.c inf*.c code coverage for build coverage testing +treebuild.xml XML description of source file dependencies +zconf.h.cmakein zconf.h template for cmake +zconf.h.in zconf.h template for configure +zlib.3 Man page for zlib +zlib.3.pdf Man page in PDF format +zlib.map Linux symbol information +zlib.pc.in Template for pkg-config descriptor +zlib.pc.cmakein zlib.pc template for cmake +zlib2ansi perl script to convert source files for C++ compilation + +amiga/ makefiles for Amiga SAS C +as400/ makefiles for AS/400 +doc/ documentation for formats and algorithms +msdos/ makefiles for MSDOS +nintendods/ makefile for Nintendo DS +old/ makefiles for various architectures and zlib documentation + files that have not yet been updated for zlib 1.2.x +qnx/ makefiles for QNX +watcom/ makefiles for OpenWatcom +win32/ makefiles for Windows + + zlib public header files (required for library use): +zconf.h +zlib.h + + private source files used to build the zlib library: +adler32.c +compress.c +crc32.c +crc32.h +deflate.c +deflate.h +gzclose.c +gzguts.h +gzlib.c +gzread.c +gzwrite.c +infback.c +inffast.c +inffast.h +inffixed.h +inflate.c +inflate.h +inftrees.c +inftrees.h +trees.c +trees.h +uncompr.c +zutil.c +zutil.h + + source files for sample programs +See examples/README.examples + + unsupported contributions by third parties +See contrib/README.contrib diff --git a/src/SDL2/external/zlib-1.2.8/Makefile.in b/src/SDL2/external/zlib-1.2.8/Makefile.in new file mode 100644 index 000000000..c61aa3008 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/Makefile.in @@ -0,0 +1,288 @@ +# Makefile for zlib +# Copyright (C) 1995-2013 Jean-loup Gailly, Mark Adler +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile and test, type: +# ./configure; make test +# Normally configure builds both a static and a shared library. +# If you want to build just a static library, use: ./configure --static + +# To use the asm code, type: +# cp contrib/asm?86/match.S ./match.S +# make LOC=-DASMV OBJA=match.o + +# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type: +# make install +# To install in $HOME instead of /usr/local, use: +# make install prefix=$HOME + +CC=cc + +CFLAGS=-O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-g -DDEBUG +#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ +# -Wstrict-prototypes -Wmissing-prototypes + +SFLAGS=-O +LDFLAGS= +TEST_LDFLAGS=-L. libz.a +LDSHARED=$(CC) +CPP=$(CC) -E + +STATICLIB=libz.a +SHAREDLIB=libz.so +SHAREDLIBV=libz.so.1.2.8 +SHAREDLIBM=libz.so.1 +LIBS=$(STATICLIB) $(SHAREDLIBV) + +AR=ar +ARFLAGS=rc +RANLIB=ranlib +LDCONFIG=ldconfig +LDSHAREDLIBC=-lc +TAR=tar +SHELL=/bin/sh +EXE= + +prefix = /usr/local +exec_prefix = ${prefix} +libdir = ${exec_prefix}/lib +sharedlibdir = ${libdir} +includedir = ${prefix}/include +mandir = ${prefix}/share/man +man3dir = ${mandir}/man3 +pkgconfigdir = ${libdir}/pkgconfig + +OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o +OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o +OBJC = $(OBJZ) $(OBJG) + +PIC_OBJZ = adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo +PIC_OBJG = compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo +PIC_OBJC = $(PIC_OBJZ) $(PIC_OBJG) + +# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo +OBJA = +PIC_OBJA = + +OBJS = $(OBJC) $(OBJA) + +PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA) + +all: static shared + +static: example$(EXE) minigzip$(EXE) + +shared: examplesh$(EXE) minigzipsh$(EXE) + +all64: example64$(EXE) minigzip64$(EXE) + +check: test + +test: all teststatic testshared + +teststatic: static + @TMPST=tmpst_$$; \ + if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; then \ + echo ' *** zlib test OK ***'; \ + else \ + echo ' *** zlib test FAILED ***'; false; \ + fi; \ + rm -f $$TMPST + +testshared: shared + @LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \ + LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \ + DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \ + SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \ + TMPSH=tmpsh_$$; \ + if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh $$TMPSH; then \ + echo ' *** zlib shared test OK ***'; \ + else \ + echo ' *** zlib shared test FAILED ***'; false; \ + fi; \ + rm -f $$TMPSH + +test64: all64 + @TMP64=tmp64_$$; \ + if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 $$TMP64; then \ + echo ' *** zlib 64-bit test OK ***'; \ + else \ + echo ' *** zlib 64-bit test FAILED ***'; false; \ + fi; \ + rm -f $$TMP64 + +infcover.o: test/infcover.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -c -o $@ test/infcover.c + +infcover: infcover.o libz.a + $(CC) $(CFLAGS) -o $@ infcover.o libz.a + +cover: infcover + rm -f *.gcda + ./infcover + gcov inf*.c + +libz.a: $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + -@ ($(RANLIB) $@ || true) >/dev/null 2>&1 + +match.o: match.S + $(CPP) match.S > _match.s + $(CC) -c _match.s + mv _match.o match.o + rm -f _match.s + +match.lo: match.S + $(CPP) match.S > _match.s + $(CC) -c -fPIC _match.s + mv _match.o match.lo + rm -f _match.s + +example.o: test/example.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -c -o $@ test/example.c + +minigzip.o: test/minigzip.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -c -o $@ test/minigzip.c + +example64.o: test/example.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ test/example.c + +minigzip64.o: test/minigzip.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ test/minigzip.c + +.SUFFIXES: .lo + +.c.lo: + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $< + -@mv objs/$*.o $@ + +placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a + $(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS) + rm -f $(SHAREDLIB) $(SHAREDLIBM) + ln -s $@ $(SHAREDLIB) + ln -s $@ $(SHAREDLIBM) + -@rmdir objs + +example$(EXE): example.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS) + +minigzip$(EXE): minigzip.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS) + +examplesh$(EXE): example.o $(SHAREDLIBV) + $(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV) + +minigzipsh$(EXE): minigzip.o $(SHAREDLIBV) + $(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV) + +example64$(EXE): example64.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS) + +minigzip64$(EXE): minigzip64.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS) + +install-libs: $(LIBS) + -@if [ ! -d $(DESTDIR)$(exec_prefix) ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi + -@if [ ! -d $(DESTDIR)$(libdir) ]; then mkdir -p $(DESTDIR)$(libdir); fi + -@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi + -@if [ ! -d $(DESTDIR)$(man3dir) ]; then mkdir -p $(DESTDIR)$(man3dir); fi + -@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi + cp $(STATICLIB) $(DESTDIR)$(libdir) + chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB) + -@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1 + -@if test -n "$(SHAREDLIBV)"; then \ + cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \ + echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \ + chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \ + echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \ + rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \ + ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \ + ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \ + ($(LDCONFIG) || true) >/dev/null 2>&1; \ + fi + cp zlib.3 $(DESTDIR)$(man3dir) + chmod 644 $(DESTDIR)$(man3dir)/zlib.3 + cp zlib.pc $(DESTDIR)$(pkgconfigdir) + chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc +# The ranlib in install is needed on NeXTSTEP which checks file times +# ldconfig is for Linux + +install: install-libs + -@if [ ! -d $(DESTDIR)$(includedir) ]; then mkdir -p $(DESTDIR)$(includedir); fi + cp zlib.h zconf.h $(DESTDIR)$(includedir) + chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h + +uninstall: + cd $(DESTDIR)$(includedir) && rm -f zlib.h zconf.h + cd $(DESTDIR)$(libdir) && rm -f libz.a; \ + if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \ + rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \ + fi + cd $(DESTDIR)$(man3dir) && rm -f zlib.3 + cd $(DESTDIR)$(pkgconfigdir) && rm -f zlib.pc + +docs: zlib.3.pdf + +zlib.3.pdf: zlib.3 + groff -mandoc -f H -T ps zlib.3 | ps2pdf - zlib.3.pdf + +zconf.h.cmakein: zconf.h.in + -@ TEMPFILE=zconfh_$$; \ + echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" >> $$TEMPFILE &&\ + sed -f $$TEMPFILE zconf.h.in > zconf.h.cmakein &&\ + touch -r zconf.h.in zconf.h.cmakein &&\ + rm $$TEMPFILE + +zconf: zconf.h.in + cp -p zconf.h.in zconf.h + +mostlyclean: clean +clean: + rm -f *.o *.lo *~ \ + example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \ + example64$(EXE) minigzip64$(EXE) \ + infcover \ + libz.* foo.gz so_locations \ + _match.s maketree contrib/infback9/*.o + rm -rf objs + rm -f *.gcda *.gcno *.gcov + rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov + +maintainer-clean: distclean +distclean: clean zconf zconf.h.cmakein docs + rm -f Makefile zlib.pc configure.log + -@rm -f .DS_Store + -@printf 'all:\n\t-@echo "Please use ./configure first. Thank you."\n' > Makefile + -@printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile + -@touch -r Makefile.in Makefile + +tags: + etags *.[ch] + +depend: + makedepend -- $(CFLAGS) -- *.[ch] + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +adler32.o zutil.o: zutil.h zlib.h zconf.h +gzclose.o gzlib.o gzread.o gzwrite.o: zlib.h zconf.h gzguts.h +compress.o example.o minigzip.o uncompr.o: zlib.h zconf.h +crc32.o: zutil.h zlib.h zconf.h crc32.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +infback.o inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h + +adler32.lo zutil.lo: zutil.h zlib.h zconf.h +gzclose.lo gzlib.lo gzread.lo gzwrite.lo: zlib.h zconf.h gzguts.h +compress.lo example.lo minigzip.lo uncompr.lo: zlib.h zconf.h +crc32.lo: zutil.h zlib.h zconf.h crc32.h +deflate.lo: deflate.h zutil.h zlib.h zconf.h +infback.lo inflate.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h +inffast.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.lo: zutil.h zlib.h zconf.h inftrees.h +trees.lo: deflate.h zutil.h zlib.h zconf.h trees.h diff --git a/src/SDL2/external/zlib-1.2.8/README b/src/SDL2/external/zlib-1.2.8/README new file mode 100644 index 000000000..5ca9d127e --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/README @@ -0,0 +1,115 @@ +ZLIB DATA COMPRESSION LIBRARY + +zlib 1.2.8 is a general purpose data compression library. All the code is +thread safe. The data format used by the zlib library is described by RFCs +(Request for Comments) 1950 to 1952 in the files +http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and +rfc1952 (gzip format). + +All functions of the compression library are documented in the file zlib.h +(volunteer to write man pages welcome, contact zlib@gzip.org). A usage example +of the library is given in the file test/example.c which also tests that +the library is working correctly. Another example is given in the file +test/minigzip.c. The compression library itself is composed of all source +files in the root directory. + +To compile all files and run the test program, follow the instructions given at +the top of Makefile.in. In short "./configure; make test", and if that goes +well, "make install" should work for most flavors of Unix. For Windows, use +one of the special makefiles in win32/ or contrib/vstudio/ . For VMS, use +make_vms.com. + +Questions about zlib should be sent to , or to Gilles Vollant + for the Windows DLL version. The zlib home page is +http://zlib.net/ . Before reporting a problem, please check this site to +verify that you have the latest version of zlib; otherwise get the latest +version and check whether the problem still exists or not. + +PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help. + +Mark Nelson wrote an article about zlib for the Jan. 1997 +issue of Dr. Dobb's Journal; a copy of the article is available at +http://marknelson.us/1997/01/01/zlib-engine/ . + +The changes made in version 1.2.8 are documented in the file ChangeLog. + +Unsupported third party contributions are provided in directory contrib/ . + +zlib is available in Java using the java.util.zip package, documented at +http://java.sun.com/developer/technicalArticles/Programming/compression/ . + +A Perl interface to zlib written by Paul Marquess is available +at CPAN (Comprehensive Perl Archive Network) sites, including +http://search.cpan.org/~pmqs/IO-Compress-Zlib/ . + +A Python interface to zlib written by A.M. Kuchling is +available in Python 1.5 and later versions, see +http://docs.python.org/library/zlib.html . + +zlib is built into tcl: http://wiki.tcl.tk/4610 . + +An experimental package to read and write files in .zip format, written on top +of zlib by Gilles Vollant , is available in the +contrib/minizip directory of zlib. + + +Notes for some targets: + +- For Windows DLL versions, please see win32/DLL_FAQ.txt + +- For 64-bit Irix, deflate.c must be compiled without any optimization. With + -O, one libpng test fails. The test works in 32 bit mode (with the -n32 + compiler flag). The compiler bug has been reported to SGI. + +- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works + when compiled with cc. + +- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is + necessary to get gzprintf working correctly. This is done by configure. + +- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with + other compilers. Use "make test" to check your compiler. + +- gzdopen is not supported on RISCOS or BEOS. + +- For PalmOs, see http://palmzlib.sourceforge.net/ + + +Acknowledgments: + + The deflate format used by zlib was defined by Phil Katz. The deflate and + zlib specifications were written by L. Peter Deutsch. Thanks to all the + people who reported problems and suggested various improvements in zlib; they + are too numerous to cite here. + +Copyright notice: + + (C) 1995-2013 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + +If you use the zlib library in a product, we would appreciate *not* receiving +lengthy legal documents to sign. The sources are provided for free but without +warranty of any kind. The library has been entirely written by Jean-loup +Gailly and Mark Adler; it does not include third-party code. + +If you redistribute modified sources, we would appreciate that you include in +the file ChangeLog history information documenting your changes. Please read +the FAQ for more information on the distribution of modified source versions. diff --git a/src/SDL2/external/zlib-1.2.8/adler32.c b/src/SDL2/external/zlib-1.2.8/adler32.c new file mode 100644 index 000000000..a868f073d --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/adler32.c @@ -0,0 +1,179 @@ +/* adler32.c -- compute the Adler-32 checksum of a data stream + * Copyright (C) 1995-2011 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zutil.h" + +#define local static + +local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2)); + +#define BASE 65521 /* largest prime smaller than 65536 */ +#define NMAX 5552 +/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + +#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} +#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); +#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); +#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); +#define DO16(buf) DO8(buf,0); DO8(buf,8); + +/* use NO_DIVIDE if your processor does not do division in hardware -- + try it both ways to see which is faster */ +#ifdef NO_DIVIDE +/* note that this assumes BASE is 65521, where 65536 % 65521 == 15 + (thank you to John Reiser for pointing this out) */ +# define CHOP(a) \ + do { \ + unsigned long tmp = a >> 16; \ + a &= 0xffffUL; \ + a += (tmp << 4) - tmp; \ + } while (0) +# define MOD28(a) \ + do { \ + CHOP(a); \ + if (a >= BASE) a -= BASE; \ + } while (0) +# define MOD(a) \ + do { \ + CHOP(a); \ + MOD28(a); \ + } while (0) +# define MOD63(a) \ + do { /* this assumes a is not negative */ \ + z_off64_t tmp = a >> 32; \ + a &= 0xffffffffL; \ + a += (tmp << 8) - (tmp << 5) + tmp; \ + tmp = a >> 16; \ + a &= 0xffffL; \ + a += (tmp << 4) - tmp; \ + tmp = a >> 16; \ + a &= 0xffffL; \ + a += (tmp << 4) - tmp; \ + if (a >= BASE) a -= BASE; \ + } while (0) +#else +# define MOD(a) a %= BASE +# define MOD28(a) a %= BASE +# define MOD63(a) a %= BASE +#endif + +/* ========================================================================= */ +uLong ZEXPORT adler32(adler, buf, len) + uLong adler; + const Bytef *buf; + uInt len; +{ + unsigned long sum2; + unsigned n; + + /* split Adler-32 into component sums */ + sum2 = (adler >> 16) & 0xffff; + adler &= 0xffff; + + /* in case user likes doing a byte at a time, keep it fast */ + if (len == 1) { + adler += buf[0]; + if (adler >= BASE) + adler -= BASE; + sum2 += adler; + if (sum2 >= BASE) + sum2 -= BASE; + return adler | (sum2 << 16); + } + + /* initial Adler-32 value (deferred check for len == 1 speed) */ + if (buf == Z_NULL) + return 1L; + + /* in case short lengths are provided, keep it somewhat fast */ + if (len < 16) { + while (len--) { + adler += *buf++; + sum2 += adler; + } + if (adler >= BASE) + adler -= BASE; + MOD28(sum2); /* only added so many BASE's */ + return adler | (sum2 << 16); + } + + /* do length NMAX blocks -- requires just one modulo operation */ + while (len >= NMAX) { + len -= NMAX; + n = NMAX / 16; /* NMAX is divisible by 16 */ + do { + DO16(buf); /* 16 sums unrolled */ + buf += 16; + } while (--n); + MOD(adler); + MOD(sum2); + } + + /* do remaining bytes (less than NMAX, still just one modulo) */ + if (len) { /* avoid modulos if none remaining */ + while (len >= 16) { + len -= 16; + DO16(buf); + buf += 16; + } + while (len--) { + adler += *buf++; + sum2 += adler; + } + MOD(adler); + MOD(sum2); + } + + /* return recombined sums */ + return adler | (sum2 << 16); +} + +/* ========================================================================= */ +local uLong adler32_combine_(adler1, adler2, len2) + uLong adler1; + uLong adler2; + z_off64_t len2; +{ + unsigned long sum1; + unsigned long sum2; + unsigned rem; + + /* for negative len, return invalid adler32 as a clue for debugging */ + if (len2 < 0) + return 0xffffffffUL; + + /* the derivation of this formula is left as an exercise for the reader */ + MOD63(len2); /* assumes len2 >= 0 */ + rem = (unsigned)len2; + sum1 = adler1 & 0xffff; + sum2 = rem * sum1; + MOD(sum2); + sum1 += (adler2 & 0xffff) + BASE - 1; + sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem; + if (sum1 >= BASE) sum1 -= BASE; + if (sum1 >= BASE) sum1 -= BASE; + if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1); + if (sum2 >= BASE) sum2 -= BASE; + return sum1 | (sum2 << 16); +} + +/* ========================================================================= */ +uLong ZEXPORT adler32_combine(adler1, adler2, len2) + uLong adler1; + uLong adler2; + z_off_t len2; +{ + return adler32_combine_(adler1, adler2, len2); +} + +uLong ZEXPORT adler32_combine64(adler1, adler2, len2) + uLong adler1; + uLong adler2; + z_off64_t len2; +{ + return adler32_combine_(adler1, adler2, len2); +} diff --git a/src/SDL2/external/zlib-1.2.8/amiga/Makefile.pup b/src/SDL2/external/zlib-1.2.8/amiga/Makefile.pup new file mode 100644 index 000000000..8940c120f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/amiga/Makefile.pup @@ -0,0 +1,69 @@ +# Amiga powerUP (TM) Makefile +# makefile for libpng and SAS C V6.58/7.00 PPC compiler +# Copyright (C) 1998 by Andreas R. Kleinert + +LIBNAME = libzip.a + +CC = scppc +CFLAGS = NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \ + OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8 NOVER +AR = ppc-amigaos-ar cr +RANLIB = ppc-amigaos-ranlib +LD = ppc-amigaos-ld -r +LDFLAGS = -o +LDLIBS = LIB:scppc.a LIB:end.o +RM = delete quiet + +OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \ + uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o + +TEST_OBJS = example.o minigzip.o + +all: example minigzip + +check: test +test: all + example + echo hello world | minigzip | minigzip -d + +$(LIBNAME): $(OBJS) + $(AR) $@ $(OBJS) + -$(RANLIB) $@ + +example: example.o $(LIBNAME) + $(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS) + +minigzip: minigzip.o $(LIBNAME) + $(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS) + +mostlyclean: clean +clean: + $(RM) *.o example minigzip $(LIBNAME) foo.gz + +zip: + zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \ + descrip.mms *.[ch] + +tgz: + cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \ + zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch] + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +adler32.o: zlib.h zconf.h +compress.o: zlib.h zconf.h +crc32.o: crc32.h zlib.h zconf.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +example.o: zlib.h zconf.h +gzclose.o: zlib.h zconf.h gzguts.h +gzlib.o: zlib.h zconf.h gzguts.h +gzread.o: zlib.h zconf.h gzguts.h +gzwrite.o: zlib.h zconf.h gzguts.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +minigzip.o: zlib.h zconf.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h +uncompr.o: zlib.h zconf.h +zutil.o: zutil.h zlib.h zconf.h diff --git a/src/SDL2/external/zlib-1.2.8/amiga/Makefile.sas b/src/SDL2/external/zlib-1.2.8/amiga/Makefile.sas new file mode 100644 index 000000000..749e29152 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/amiga/Makefile.sas @@ -0,0 +1,68 @@ +# SMakefile for zlib +# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly +# Osma Ahvenlampi +# Amiga, SAS/C 6.56 & Smake + +CC=sc +CFLAGS=OPT +#CFLAGS=OPT CPU=68030 +#CFLAGS=DEBUG=LINE +LDFLAGS=LIB z.lib + +SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \ + NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX \ + DEF=POSTINC + +OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \ + uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o + +TEST_OBJS = example.o minigzip.o + +all: SCOPTIONS example minigzip + +check: test +test: all + example + echo hello world | minigzip | minigzip -d + +install: z.lib + copy clone zlib.h zconf.h INCLUDE: + copy clone z.lib LIB: + +z.lib: $(OBJS) + oml z.lib r $(OBJS) + +example: example.o z.lib + $(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS) + +minigzip: minigzip.o z.lib + $(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS) + +mostlyclean: clean +clean: + -delete force quiet example minigzip *.o z.lib foo.gz *.lnk SCOPTIONS + +SCOPTIONS: Makefile.sas + copy to $@ 64K on 16-bit machine: */ + if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; +#endif + stream.next_out = dest; + stream.avail_out = (uInt)*destLen; + if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; + + stream.zalloc = (alloc_func)0; + stream.zfree = (free_func)0; + stream.opaque = (voidpf)0; + + err = deflateInit(&stream, level); + if (err != Z_OK) return err; + + err = deflate(&stream, Z_FINISH); + if (err != Z_STREAM_END) { + deflateEnd(&stream); + return err == Z_OK ? Z_BUF_ERROR : err; + } + *destLen = stream.total_out; + + err = deflateEnd(&stream); + return err; +} + +/* =========================================================================== + */ +int ZEXPORT compress (dest, destLen, source, sourceLen) + Bytef *dest; + uLongf *destLen; + const Bytef *source; + uLong sourceLen; +{ + return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION); +} + +/* =========================================================================== + If the default memLevel or windowBits for deflateInit() is changed, then + this function needs to be updated. + */ +uLong ZEXPORT compressBound (sourceLen) + uLong sourceLen; +{ + return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + + (sourceLen >> 25) + 13; +} diff --git a/src/SDL2/external/zlib-1.2.8/configure b/src/SDL2/external/zlib-1.2.8/configure new file mode 100755 index 000000000..b77a8a8cf --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/configure @@ -0,0 +1,831 @@ +#!/bin/sh +# configure script for zlib. +# +# Normally configure builds both a static and a shared library. +# If you want to build just a static library, use: ./configure --static +# +# To impose specific compiler or flags or install directory, use for example: +# prefix=$HOME CC=cc CFLAGS="-O4" ./configure +# or for csh/tcsh users: +# (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure) + +# Incorrect settings of CC or CFLAGS may prevent creating a shared library. +# If you have problems, try without defining CC and CFLAGS before reporting +# an error. + +# start off configure.log +echo -------------------- >> configure.log +echo $0 $* >> configure.log +date >> configure.log + +# set command prefix for cross-compilation +if [ -n "${CHOST}" ]; then + uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`" + CROSS_PREFIX="${CHOST}-" +fi + +# destination name for static library +STATICLIB=libz.a + +# extract zlib version numbers from zlib.h +VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h` +VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h` +VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h` +VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h` + +# establish commands for library building +if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then + AR=${AR-"${CROSS_PREFIX}ar"} + test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log +else + AR=${AR-"ar"} + test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log +fi +ARFLAGS=${ARFLAGS-"rc"} +if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then + RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"} + test -n "${CROSS_PREFIX}" && echo Using ${RANLIB} | tee -a configure.log +else + RANLIB=${RANLIB-"ranlib"} +fi +if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then + NM=${NM-"${CROSS_PREFIX}nm"} + test -n "${CROSS_PREFIX}" && echo Using ${NM} | tee -a configure.log +else + NM=${NM-"nm"} +fi + +# set defaults before processing command line options +LDCONFIG=${LDCONFIG-"ldconfig"} +LDSHAREDLIBC="${LDSHAREDLIBC--lc}" +ARCHS= +prefix=${prefix-/usr/local} +exec_prefix=${exec_prefix-'${prefix}'} +libdir=${libdir-'${exec_prefix}/lib'} +sharedlibdir=${sharedlibdir-'${libdir}'} +includedir=${includedir-'${prefix}/include'} +mandir=${mandir-'${prefix}/share/man'} +shared_ext='.so' +shared=1 +solo=0 +cover=0 +zprefix=0 +zconst=0 +build64=0 +gcc=0 +old_cc="$CC" +old_cflags="$CFLAGS" +OBJC='$(OBJZ) $(OBJG)' +PIC_OBJC='$(PIC_OBJZ) $(PIC_OBJG)' + +# leave this script, optionally in a bad way +leave() +{ + if test "$*" != "0"; then + echo "** $0 aborting." | tee -a configure.log + fi + rm -f $test.[co] $test $test$shared_ext $test.gcno ./--version + echo -------------------- >> configure.log + echo >> configure.log + echo >> configure.log + exit $1 +} + +# process command line options +while test $# -ge 1 +do +case "$1" in + -h* | --help) + echo 'usage:' | tee -a configure.log + echo ' configure [--const] [--zprefix] [--prefix=PREFIX] [--eprefix=EXPREFIX]' | tee -a configure.log + echo ' [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]' | tee -a configure.log + echo ' [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]' | tee -a configure.log + exit 0 ;; + -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;; + -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;; + -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;; + --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;; + -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;; + -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;; + -p* | --prefix) prefix="$2"; shift; shift ;; + -e* | --eprefix) exec_prefix="$2"; shift; shift ;; + -l* | --libdir) libdir="$2"; shift; shift ;; + -i* | --includedir) includedir="$2"; shift; shift ;; + -s* | --shared | --enable-shared) shared=1; shift ;; + -t | --static) shared=0; shift ;; + --solo) solo=1; shift ;; + --cover) cover=1; shift ;; + -z* | --zprefix) zprefix=1; shift ;; + -6* | --64) build64=1; shift ;; + -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;; + --sysconfdir=*) echo "ignored option: --sysconfdir" | tee -a configure.log; shift ;; + --localstatedir=*) echo "ignored option: --localstatedir" | tee -a configure.log; shift ;; + -c* | --const) zconst=1; shift ;; + *) + echo "unknown option: $1" | tee -a configure.log + echo "$0 --help for help" | tee -a configure.log + leave 1;; + esac +done + +# temporary file name +test=ztest$$ + +# put arguments in log, also put test file in log if used in arguments +show() +{ + case "$*" in + *$test.c*) + echo === $test.c === >> configure.log + cat $test.c >> configure.log + echo === >> configure.log;; + esac + echo $* >> configure.log +} + +# check for gcc vs. cc and set compile and link flags based on the system identified by uname +cat > $test.c <&1` in + *gcc*) gcc=1 ;; +esac + +show $cc -c $test.c +if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then + echo ... using gcc >> configure.log + CC="$cc" + CFLAGS="${CFLAGS--O3} ${ARCHS}" + SFLAGS="${CFLAGS--O3} -fPIC" + LDFLAGS="${LDFLAGS} ${ARCHS}" + if test $build64 -eq 1; then + CFLAGS="${CFLAGS} -m64" + SFLAGS="${SFLAGS} -m64" + fi + if test "${ZLIBGCCWARN}" = "YES"; then + if test "$zconst" -eq 1; then + CFLAGS="${CFLAGS} -Wall -Wextra -Wcast-qual -pedantic -DZLIB_CONST" + else + CFLAGS="${CFLAGS} -Wall -Wextra -pedantic" + fi + fi + if test -z "$uname"; then + uname=`(uname -s || echo unknown) 2>/dev/null` + fi + case "$uname" in + Linux* | linux* | GNU | GNU/* | solaris*) + LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;; + *BSD | *bsd* | DragonFly) + LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} + LDCONFIG="ldconfig -m" ;; + CYGWIN* | Cygwin* | cygwin* | OS/2*) + EXE='.exe' ;; + MINGW* | mingw*) +# temporary bypass + rm -f $test.[co] $test $test$shared_ext + echo "Please use win32/Makefile.gcc instead." | tee -a configure.log + leave 1 + LDSHARED=${LDSHARED-"$cc -shared"} + LDSHAREDLIBC="" + EXE='.exe' ;; + QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4 + # (alain.bonnefoy@icbt.com) + LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;; + HP-UX*) + LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"} + case `(uname -m || echo unknown) 2>/dev/null` in + ia64) + shared_ext='.so' + SHAREDLIB='libz.so' ;; + *) + shared_ext='.sl' + SHAREDLIB='libz.sl' ;; + esac ;; + Darwin* | darwin*) + shared_ext='.dylib' + SHAREDLIB=libz$shared_ext + SHAREDLIBV=libz.$VER$shared_ext + SHAREDLIBM=libz.$VER1$shared_ext + LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} + if libtool -V 2>&1 | grep Apple > /dev/null; then + AR="libtool" + else + AR="/usr/bin/libtool" + fi + ARFLAGS="-o" ;; + *) LDSHARED=${LDSHARED-"$cc -shared"} ;; + esac +else + # find system name and corresponding cc options + CC=${CC-cc} + gcc=0 + echo ... using $CC >> configure.log + if test -z "$uname"; then + uname=`(uname -sr || echo unknown) 2>/dev/null` + fi + case "$uname" in + HP-UX*) SFLAGS=${CFLAGS-"-O +z"} + CFLAGS=${CFLAGS-"-O"} +# LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"} + LDSHARED=${LDSHARED-"ld -b"} + case `(uname -m || echo unknown) 2>/dev/null` in + ia64) + shared_ext='.so' + SHAREDLIB='libz.so' ;; + *) + shared_ext='.sl' + SHAREDLIB='libz.sl' ;; + esac ;; + IRIX*) SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."} + CFLAGS=${CFLAGS-"-ansi -O2"} + LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;; + OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"} + CFLAGS=${CFLAGS-"-O -std1"} + LDFLAGS="${LDFLAGS} -Wl,-rpath,." + LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"} ;; + OSF1*) SFLAGS=${CFLAGS-"-O -std1"} + CFLAGS=${CFLAGS-"-O -std1"} + LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;; + QNX*) SFLAGS=${CFLAGS-"-4 -O"} + CFLAGS=${CFLAGS-"-4 -O"} + LDSHARED=${LDSHARED-"cc"} + RANLIB=${RANLIB-"true"} + AR="cc" + ARFLAGS="-A" ;; + SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "} + CFLAGS=${CFLAGS-"-O3"} + LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;; + SunOS\ 5* | solaris*) + LDSHARED=${LDSHARED-"cc -G -h libz$shared_ext.$VER1"} + SFLAGS=${CFLAGS-"-fast -KPIC"} + CFLAGS=${CFLAGS-"-fast"} + if test $build64 -eq 1; then + # old versions of SunPRO/Workshop/Studio don't support -m64, + # but newer ones do. Check for it. + flag64=`$CC -flags | egrep -- '^-m64'` + if test x"$flag64" != x"" ; then + CFLAGS="${CFLAGS} -m64" + SFLAGS="${SFLAGS} -m64" + else + case `(uname -m || echo unknown) 2>/dev/null` in + i86*) + SFLAGS="$SFLAGS -xarch=amd64" + CFLAGS="$CFLAGS -xarch=amd64" ;; + *) + SFLAGS="$SFLAGS -xarch=v9" + CFLAGS="$CFLAGS -xarch=v9" ;; + esac + fi + fi + ;; + SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"} + CFLAGS=${CFLAGS-"-O2"} + LDSHARED=${LDSHARED-"ld"} ;; + SunStudio\ 9*) SFLAGS=${CFLAGS-"-fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"} + CFLAGS=${CFLAGS-"-fast -xtarget=ultra3 -xarch=v9b"} + LDSHARED=${LDSHARED-"cc -xarch=v9b"} ;; + UNIX_System_V\ 4.2.0) + SFLAGS=${CFLAGS-"-KPIC -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"} ;; + UNIX_SV\ 4.2MP) + SFLAGS=${CFLAGS-"-Kconform_pic -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"} ;; + OpenUNIX\ 5) + SFLAGS=${CFLAGS-"-KPIC -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"} ;; + AIX*) # Courtesy of dbakker@arrayasolutions.com + SFLAGS=${CFLAGS-"-O -qmaxmem=8192"} + CFLAGS=${CFLAGS-"-O -qmaxmem=8192"} + LDSHARED=${LDSHARED-"xlc -G"} ;; + # send working options for other systems to zlib@gzip.org + *) SFLAGS=${CFLAGS-"-O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -shared"} ;; + esac +fi + +# destination names for shared library if not defined above +SHAREDLIB=${SHAREDLIB-"libz$shared_ext"} +SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"} +SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"} + +echo >> configure.log + +# define functions for testing compiler and library characteristics and logging the results + +cat > $test.c </dev/null; then + try() + { + show $* + test "`( $* ) 2>&1 | tee -a configure.log`" = "" + } + echo - using any output from compiler to indicate an error >> configure.log +else +try() +{ + show $* + ( $* ) >> configure.log 2>&1 + ret=$? + if test $ret -ne 0; then + echo "(exit code "$ret")" >> configure.log + fi + return $ret +} +fi + +tryboth() +{ + show $* + got=`( $* ) 2>&1` + ret=$? + printf %s "$got" >> configure.log + if test $ret -ne 0; then + return $ret + fi + test "$got" = "" +} + +cat > $test.c << EOF +int foo() { return 0; } +EOF +echo "Checking for obsessive-compulsive compiler options..." >> configure.log +if try $CC -c $CFLAGS $test.c; then + : +else + echo "Compiler error reporting is too harsh for $0 (perhaps remove -Werror)." | tee -a configure.log + leave 1 +fi + +echo >> configure.log + +# see if shared library build supported +cat > $test.c <> configure.log + show "$NM $test.o | grep _hello" + if test "`$NM $test.o | grep _hello | tee -a configure.log`" = ""; then + CPP="$CPP -DNO_UNDERLINE" + echo Checking for underline in external names... No. | tee -a configure.log + else + echo Checking for underline in external names... Yes. | tee -a configure.log + fi ;; +esac + +echo >> configure.log + +# check for large file support, and if none, check for fseeko() +cat > $test.c < +off64_t dummy = 0; +EOF +if try $CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c; then + CFLAGS="${CFLAGS} -D_LARGEFILE64_SOURCE=1" + SFLAGS="${SFLAGS} -D_LARGEFILE64_SOURCE=1" + ALL="${ALL} all64" + TEST="${TEST} test64" + echo "Checking for off64_t... Yes." | tee -a configure.log + echo "Checking for fseeko... Yes." | tee -a configure.log +else + echo "Checking for off64_t... No." | tee -a configure.log + echo >> configure.log + cat > $test.c < +int main(void) { + fseeko(NULL, 0, 0); + return 0; +} +EOF + if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for fseeko... Yes." | tee -a configure.log + else + CFLAGS="${CFLAGS} -DNO_FSEEKO" + SFLAGS="${SFLAGS} -DNO_FSEEKO" + echo "Checking for fseeko... No." | tee -a configure.log + fi +fi + +echo >> configure.log + +# check for strerror() for use by gz* functions +cat > $test.c < +#include +int main() { return strlen(strerror(errno)); } +EOF +if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for strerror... Yes." | tee -a configure.log +else + CFLAGS="${CFLAGS} -DNO_STRERROR" + SFLAGS="${SFLAGS} -DNO_STRERROR" + echo "Checking for strerror... No." | tee -a configure.log +fi + +# copy clean zconf.h for subsequent edits +cp -p zconf.h.in zconf.h + +echo >> configure.log + +# check for unistd.h and save result in zconf.h +cat > $test.c < +int main() { return 0; } +EOF +if try $CC -c $CFLAGS $test.c; then + sed < zconf.h "/^#ifdef HAVE_UNISTD_H.* may be/s/def HAVE_UNISTD_H\(.*\) may be/ 1\1 was/" > zconf.temp.h + mv zconf.temp.h zconf.h + echo "Checking for unistd.h... Yes." | tee -a configure.log +else + echo "Checking for unistd.h... No." | tee -a configure.log +fi + +echo >> configure.log + +# check for stdarg.h and save result in zconf.h +cat > $test.c < +int main() { return 0; } +EOF +if try $CC -c $CFLAGS $test.c; then + sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h + mv zconf.temp.h zconf.h + echo "Checking for stdarg.h... Yes." | tee -a configure.log +else + echo "Checking for stdarg.h... No." | tee -a configure.log +fi + +# if the z_ prefix was requested, save that in zconf.h +if test $zprefix -eq 1; then + sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h + mv zconf.temp.h zconf.h + echo >> configure.log + echo "Using z_ prefix on all symbols." | tee -a configure.log +fi + +# if --solo compilation was requested, save that in zconf.h and remove gz stuff from object lists +if test $solo -eq 1; then + sed '/#define ZCONF_H/a\ +#define Z_SOLO + +' < zconf.h > zconf.temp.h + mv zconf.temp.h zconf.h +OBJC='$(OBJZ)' +PIC_OBJC='$(PIC_OBJZ)' +fi + +# if code coverage testing was requested, use older gcc if defined, e.g. "gcc-4.2" on Mac OS X +if test $cover -eq 1; then + CFLAGS="${CFLAGS} -fprofile-arcs -ftest-coverage" + if test -n "$GCC_CLASSIC"; then + CC=$GCC_CLASSIC + fi +fi + +echo >> configure.log + +# conduct a series of tests to resolve eight possible cases of using "vs" or "s" printf functions +# (using stdarg or not), with or without "n" (proving size of buffer), and with or without a +# return value. The most secure result is vsnprintf() with a return value. snprintf() with a +# return value is secure as well, but then gzprintf() will be limited to 20 arguments. +cat > $test.c < +#include +#include "zconf.h" +int main() +{ +#ifndef STDC + choke me +#endif + return 0; +} +EOF +if try $CC -c $CFLAGS $test.c; then + echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()." | tee -a configure.log + + echo >> configure.log + cat > $test.c < +#include +int mytest(const char *fmt, ...) +{ + char buf[20]; + va_list ap; + va_start(ap, fmt); + vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + return 0; +} +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for vsnprintf() in stdio.h... Yes." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +#include +int mytest(const char *fmt, ...) +{ + int n; + char buf[20]; + va_list ap; + va_start(ap, fmt); + n = vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + return n; +} +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of vsnprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_vsnprintf_void" + SFLAGS="$SFLAGS -DHAS_vsnprintf_void" + echo "Checking for return value of vsnprintf()... No." | tee -a configure.log + echo " WARNING: apparently vsnprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + else + CFLAGS="$CFLAGS -DNO_vsnprintf" + SFLAGS="$SFLAGS -DNO_vsnprintf" + echo "Checking for vsnprintf() in stdio.h... No." | tee -a configure.log + echo " WARNING: vsnprintf() not found, falling back to vsprintf(). zlib" | tee -a configure.log + echo " can build but will be open to possible buffer-overflow security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +#include +int mytest(const char *fmt, ...) +{ + int n; + char buf[20]; + va_list ap; + va_start(ap, fmt); + n = vsprintf(buf, fmt, ap); + va_end(ap); + return n; +} +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of vsprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_vsprintf_void" + SFLAGS="$SFLAGS -DHAS_vsprintf_void" + echo "Checking for return value of vsprintf()... No." | tee -a configure.log + echo " WARNING: apparently vsprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + fi +else + echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +int mytest() +{ + char buf[20]; + snprintf(buf, sizeof(buf), "%s", "foo"); + return 0; +} +int main() +{ + return (mytest()); +} +EOF + + if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for snprintf() in stdio.h... Yes." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +int mytest() +{ + char buf[20]; + return snprintf(buf, sizeof(buf), "%s", "foo"); +} +int main() +{ + return (mytest()); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of snprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_snprintf_void" + SFLAGS="$SFLAGS -DHAS_snprintf_void" + echo "Checking for return value of snprintf()... No." | tee -a configure.log + echo " WARNING: apparently snprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + else + CFLAGS="$CFLAGS -DNO_snprintf" + SFLAGS="$SFLAGS -DNO_snprintf" + echo "Checking for snprintf() in stdio.h... No." | tee -a configure.log + echo " WARNING: snprintf() not found, falling back to sprintf(). zlib" | tee -a configure.log + echo " can build but will be open to possible buffer-overflow security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +int mytest() +{ + char buf[20]; + return sprintf(buf, "%s", "foo"); +} +int main() +{ + return (mytest()); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of sprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_sprintf_void" + SFLAGS="$SFLAGS -DHAS_sprintf_void" + echo "Checking for return value of sprintf()... No." | tee -a configure.log + echo " WARNING: apparently sprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + fi +fi + +# see if we can hide zlib internal symbols that are linked between separate source files +if test "$gcc" -eq 1; then + echo >> configure.log + cat > $test.c <> configure.log +echo ALL = $ALL >> configure.log +echo AR = $AR >> configure.log +echo ARFLAGS = $ARFLAGS >> configure.log +echo CC = $CC >> configure.log +echo CFLAGS = $CFLAGS >> configure.log +echo CPP = $CPP >> configure.log +echo EXE = $EXE >> configure.log +echo LDCONFIG = $LDCONFIG >> configure.log +echo LDFLAGS = $LDFLAGS >> configure.log +echo LDSHARED = $LDSHARED >> configure.log +echo LDSHAREDLIBC = $LDSHAREDLIBC >> configure.log +echo OBJC = $OBJC >> configure.log +echo PIC_OBJC = $PIC_OBJC >> configure.log +echo RANLIB = $RANLIB >> configure.log +echo SFLAGS = $SFLAGS >> configure.log +echo SHAREDLIB = $SHAREDLIB >> configure.log +echo SHAREDLIBM = $SHAREDLIBM >> configure.log +echo SHAREDLIBV = $SHAREDLIBV >> configure.log +echo STATICLIB = $STATICLIB >> configure.log +echo TEST = $TEST >> configure.log +echo VER = $VER >> configure.log +echo Z_U4 = $Z_U4 >> configure.log +echo exec_prefix = $exec_prefix >> configure.log +echo includedir = $includedir >> configure.log +echo libdir = $libdir >> configure.log +echo mandir = $mandir >> configure.log +echo prefix = $prefix >> configure.log +echo sharedlibdir = $sharedlibdir >> configure.log +echo uname = $uname >> configure.log + +# udpate Makefile with the configure results +sed < Makefile.in " +/^CC *=/s#=.*#=$CC# +/^CFLAGS *=/s#=.*#=$CFLAGS# +/^SFLAGS *=/s#=.*#=$SFLAGS# +/^LDFLAGS *=/s#=.*#=$LDFLAGS# +/^LDSHARED *=/s#=.*#=$LDSHARED# +/^CPP *=/s#=.*#=$CPP# +/^STATICLIB *=/s#=.*#=$STATICLIB# +/^SHAREDLIB *=/s#=.*#=$SHAREDLIB# +/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV# +/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM# +/^AR *=/s#=.*#=$AR# +/^ARFLAGS *=/s#=.*#=$ARFLAGS# +/^RANLIB *=/s#=.*#=$RANLIB# +/^LDCONFIG *=/s#=.*#=$LDCONFIG# +/^LDSHAREDLIBC *=/s#=.*#=$LDSHAREDLIBC# +/^EXE *=/s#=.*#=$EXE# +/^prefix *=/s#=.*#=$prefix# +/^exec_prefix *=/s#=.*#=$exec_prefix# +/^libdir *=/s#=.*#=$libdir# +/^sharedlibdir *=/s#=.*#=$sharedlibdir# +/^includedir *=/s#=.*#=$includedir# +/^mandir *=/s#=.*#=$mandir# +/^OBJC *=/s#=.*#= $OBJC# +/^PIC_OBJC *=/s#=.*#= $PIC_OBJC# +/^all: */s#:.*#: $ALL# +/^test: */s#:.*#: $TEST# +" > Makefile + +# create zlib.pc with the configure results +sed < zlib.pc.in " +/^CC *=/s#=.*#=$CC# +/^CFLAGS *=/s#=.*#=$CFLAGS# +/^CPP *=/s#=.*#=$CPP# +/^LDSHARED *=/s#=.*#=$LDSHARED# +/^STATICLIB *=/s#=.*#=$STATICLIB# +/^SHAREDLIB *=/s#=.*#=$SHAREDLIB# +/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV# +/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM# +/^AR *=/s#=.*#=$AR# +/^ARFLAGS *=/s#=.*#=$ARFLAGS# +/^RANLIB *=/s#=.*#=$RANLIB# +/^EXE *=/s#=.*#=$EXE# +/^prefix *=/s#=.*#=$prefix# +/^exec_prefix *=/s#=.*#=$exec_prefix# +/^libdir *=/s#=.*#=$libdir# +/^sharedlibdir *=/s#=.*#=$sharedlibdir# +/^includedir *=/s#=.*#=$includedir# +/^mandir *=/s#=.*#=$mandir# +/^LDFLAGS *=/s#=.*#=$LDFLAGS# +" | sed -e " +s/\@VERSION\@/$VER/g; +" > zlib.pc + +# done +leave 0 diff --git a/src/SDL2/external/zlib-1.2.8/contrib/README.contrib b/src/SDL2/external/zlib-1.2.8/contrib/README.contrib new file mode 100644 index 000000000..c66349b7c --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/README.contrib @@ -0,0 +1,78 @@ +All files under this contrib directory are UNSUPPORTED. There were +provided by users of zlib and were not tested by the authors of zlib. +Use at your own risk. Please contact the authors of the contributions +for help about these, not the zlib authors. Thanks. + + +ada/ by Dmitriy Anisimkov + Support for Ada + See http://zlib-ada.sourceforge.net/ + +amd64/ by Mikhail Teterin + asm code for AMD64 + See patch at http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/96393 + +asm686/ by Brian Raiter + asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax + See http://www.muppetlabs.com/~breadbox/software/assembly.html + +blast/ by Mark Adler + Decompressor for output of PKWare Data Compression Library (DCL) + +delphi/ by Cosmin Truta + Support for Delphi and C++ Builder + +dotzlib/ by Henrik Ravn + Support for Microsoft .Net and Visual C++ .Net + +gcc_gvmat64/by Gilles Vollant + GCC Version of x86 64-bit (AMD64 and Intel EM64t) code for x64 + assembler to replace longest_match() and inflate_fast() + +infback9/ by Mark Adler + Unsupported diffs to infback to decode the deflate64 format + +inflate86/ by Chris Anderson + Tuned x86 gcc asm code to replace inflate_fast() + +iostream/ by Kevin Ruland + A C++ I/O streams interface to the zlib gz* functions + +iostream2/ by Tyge Løvset + Another C++ I/O streams interface + +iostream3/ by Ludwig Schwardt + and Kevin Ruland + Yet another C++ I/O streams interface + +masmx64/ by Gilles Vollant + x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to + replace longest_match() and inflate_fast(), also masm x86 + 64-bits translation of Chris Anderson inflate_fast() + +masmx86/ by Gilles Vollant + x86 asm code to replace longest_match() and inflate_fast(), + for Visual C++ and MASM (32 bits). + Based on Brian Raiter (asm686) and Chris Anderson (inflate86) + +minizip/ by Gilles Vollant + Mini zip and unzip based on zlib + Includes Zip64 support by Mathias Svensson + See http://www.winimage.com/zLibDll/unzip.html + +pascal/ by Bob Dellaca et al. + Support for Pascal + +puff/ by Mark Adler + Small, low memory usage inflate. Also serves to provide an + unambiguous description of the deflate format. + +testzlib/ by Gilles Vollant + Example of the use of zlib + +untgz/ by Pedro A. Aranda Gutierrez + A very simple tar.gz file extractor using zlib + +vstudio/ by Gilles Vollant + Building a minizip-enhanced zlib with Microsoft Visual Studio + Includes vc11 from kreuzerkrieg and vc12 from davispuh diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/buffer_demo.adb b/src/SDL2/external/zlib-1.2.8/contrib/ada/buffer_demo.adb new file mode 100644 index 000000000..46b863810 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/buffer_demo.adb @@ -0,0 +1,106 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2004 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- +-- +-- $Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp $ + +-- This demo program provided by Dr Steve Sangwine +-- +-- Demonstration of a problem with Zlib-Ada (already fixed) when a buffer +-- of exactly the correct size is used for decompressed data, and the last +-- few bytes passed in to Zlib are checksum bytes. + +-- This program compresses a string of text, and then decompresses the +-- compressed text into a buffer of the same size as the original text. + +with Ada.Streams; use Ada.Streams; +with Ada.Text_IO; + +with ZLib; use ZLib; + +procedure Buffer_Demo is + EOL : Character renames ASCII.LF; + Text : constant String + := "Four score and seven years ago our fathers brought forth," & EOL & + "upon this continent, a new nation, conceived in liberty," & EOL & + "and dedicated to the proposition that `all men are created equal'."; + + Source : Stream_Element_Array (1 .. Text'Length); + for Source'Address use Text'Address; + +begin + Ada.Text_IO.Put (Text); + Ada.Text_IO.New_Line; + Ada.Text_IO.Put_Line + ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes"); + + declare + Compressed_Data : Stream_Element_Array (1 .. Text'Length); + L : Stream_Element_Offset; + begin + Compress : declare + Compressor : Filter_Type; + I : Stream_Element_Offset; + begin + Deflate_Init (Compressor); + + -- Compress the whole of T at once. + + Translate (Compressor, Source, I, Compressed_Data, L, Finish); + pragma Assert (I = Source'Last); + + Close (Compressor); + + Ada.Text_IO.Put_Line + ("Compressed size : " + & Stream_Element_Offset'Image (L) & " bytes"); + end Compress; + + -- Now we decompress the data, passing short blocks of data to Zlib + -- (because this demonstrates the problem - the last block passed will + -- contain checksum information and there will be no output, only a + -- check inside Zlib that the checksum is correct). + + Decompress : declare + Decompressor : Filter_Type; + + Uncompressed_Data : Stream_Element_Array (1 .. Text'Length); + + Block_Size : constant := 4; + -- This makes sure that the last block contains + -- only Adler checksum data. + + P : Stream_Element_Offset := Compressed_Data'First - 1; + O : Stream_Element_Offset; + begin + Inflate_Init (Decompressor); + + loop + Translate + (Decompressor, + Compressed_Data + (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)), + P, + Uncompressed_Data + (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last), + O, + No_Flush); + + Ada.Text_IO.Put_Line + ("Total in : " & Count'Image (Total_In (Decompressor)) & + ", out : " & Count'Image (Total_Out (Decompressor))); + + exit when P = L; + end loop; + + Ada.Text_IO.New_Line; + Ada.Text_IO.Put_Line + ("Decompressed text matches original text : " + & Boolean'Image (Uncompressed_Data = Source)); + end Decompress; + end; +end Buffer_Demo; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/mtest.adb b/src/SDL2/external/zlib-1.2.8/contrib/ada/mtest.adb new file mode 100644 index 000000000..c4dfd080f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/mtest.adb @@ -0,0 +1,156 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- +-- Continuous test for ZLib multithreading. If the test would fail +-- we should provide thread safe allocation routines for the Z_Stream. +-- +-- $Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp $ + +with ZLib; +with Ada.Streams; +with Ada.Numerics.Discrete_Random; +with Ada.Text_IO; +with Ada.Exceptions; +with Ada.Task_Identification; + +procedure MTest is + use Ada.Streams; + use ZLib; + + Stop : Boolean := False; + + pragma Atomic (Stop); + + subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#; + + package Random_Elements is + new Ada.Numerics.Discrete_Random (Visible_Symbols); + + task type Test_Task; + + task body Test_Task is + Buffer : Stream_Element_Array (1 .. 100_000); + Gen : Random_Elements.Generator; + + Buffer_First : Stream_Element_Offset; + Compare_First : Stream_Element_Offset; + + Deflate : Filter_Type; + Inflate : Filter_Type; + + procedure Further (Item : in Stream_Element_Array); + + procedure Read_Buffer + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + + ------------- + -- Further -- + ------------- + + procedure Further (Item : in Stream_Element_Array) is + + procedure Compare (Item : in Stream_Element_Array); + + ------------- + -- Compare -- + ------------- + + procedure Compare (Item : in Stream_Element_Array) is + Next_First : Stream_Element_Offset := Compare_First + Item'Length; + begin + if Buffer (Compare_First .. Next_First - 1) /= Item then + raise Program_Error; + end if; + + Compare_First := Next_First; + end Compare; + + procedure Compare_Write is new ZLib.Write (Write => Compare); + begin + Compare_Write (Inflate, Item, No_Flush); + end Further; + + ----------------- + -- Read_Buffer -- + ----------------- + + procedure Read_Buffer + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset) + is + Buff_Diff : Stream_Element_Offset := Buffer'Last - Buffer_First; + Next_First : Stream_Element_Offset; + begin + if Item'Length <= Buff_Diff then + Last := Item'Last; + + Next_First := Buffer_First + Item'Length; + + Item := Buffer (Buffer_First .. Next_First - 1); + + Buffer_First := Next_First; + else + Last := Item'First + Buff_Diff; + Item (Item'First .. Last) := Buffer (Buffer_First .. Buffer'Last); + Buffer_First := Buffer'Last + 1; + end if; + end Read_Buffer; + + procedure Translate is new Generic_Translate + (Data_In => Read_Buffer, + Data_Out => Further); + + begin + Random_Elements.Reset (Gen); + + Buffer := (others => 20); + + Main : loop + for J in Buffer'Range loop + Buffer (J) := Random_Elements.Random (Gen); + + Deflate_Init (Deflate); + Inflate_Init (Inflate); + + Buffer_First := Buffer'First; + Compare_First := Buffer'First; + + Translate (Deflate); + + if Compare_First /= Buffer'Last + 1 then + raise Program_Error; + end if; + + Ada.Text_IO.Put_Line + (Ada.Task_Identification.Image + (Ada.Task_Identification.Current_Task) + & Stream_Element_Offset'Image (J) + & ZLib.Count'Image (Total_Out (Deflate))); + + Close (Deflate); + Close (Inflate); + + exit Main when Stop; + end loop; + end loop Main; + exception + when E : others => + Ada.Text_IO.Put_Line (Ada.Exceptions.Exception_Information (E)); + Stop := True; + end Test_Task; + + Test : array (1 .. 4) of Test_Task; + + pragma Unreferenced (Test); + + Dummy : Character; + +begin + Ada.Text_IO.Get_Immediate (Dummy); + Stop := True; +end MTest; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/read.adb b/src/SDL2/external/zlib-1.2.8/contrib/ada/read.adb new file mode 100644 index 000000000..1f2efbfeb --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/read.adb @@ -0,0 +1,156 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: read.adb,v 1.8 2004/05/31 10:53:40 vagul Exp $ + +-- Test/demo program for the generic read interface. + +with Ada.Numerics.Discrete_Random; +with Ada.Streams; +with Ada.Text_IO; + +with ZLib; + +procedure Read is + + use Ada.Streams; + + ------------------------------------ + -- Test configuration parameters -- + ------------------------------------ + + File_Size : Stream_Element_Offset := 100_000; + + Continuous : constant Boolean := False; + -- If this constant is True, the test would be repeated again and again, + -- with increment File_Size for every iteration. + + Header : constant ZLib.Header_Type := ZLib.Default; + -- Do not use Header other than Default in ZLib versions 1.1.4 and older. + + Init_Random : constant := 8; + -- We are using the same random sequence, in case of we catch bug, + -- so we would be able to reproduce it. + + -- End -- + + Pack_Size : Stream_Element_Offset; + Offset : Stream_Element_Offset; + + Filter : ZLib.Filter_Type; + + subtype Visible_Symbols + is Stream_Element range 16#20# .. 16#7E#; + + package Random_Elements is new + Ada.Numerics.Discrete_Random (Visible_Symbols); + + Gen : Random_Elements.Generator; + Period : constant Stream_Element_Offset := 200; + -- Period constant variable for random generator not to be very random. + -- Bigger period, harder random. + + Read_Buffer : Stream_Element_Array (1 .. 2048); + Read_First : Stream_Element_Offset; + Read_Last : Stream_Element_Offset; + + procedure Reset; + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset); + -- this procedure is for generic instantiation of + -- ZLib.Read + -- reading data from the File_In. + + procedure Read is new ZLib.Read + (Read, + Read_Buffer, + Rest_First => Read_First, + Rest_Last => Read_Last); + + ---------- + -- Read -- + ---------- + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) is + begin + Last := Stream_Element_Offset'Min + (Item'Last, + Item'First + File_Size - Offset); + + for J in Item'First .. Last loop + if J < Item'First + Period then + Item (J) := Random_Elements.Random (Gen); + else + Item (J) := Item (J - Period); + end if; + + Offset := Offset + 1; + end loop; + end Read; + + ----------- + -- Reset -- + ----------- + + procedure Reset is + begin + Random_Elements.Reset (Gen, Init_Random); + Pack_Size := 0; + Offset := 1; + Read_First := Read_Buffer'Last + 1; + Read_Last := Read_Buffer'Last; + end Reset; + +begin + Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version); + + loop + for Level in ZLib.Compression_Level'Range loop + + Ada.Text_IO.Put ("Level =" + & ZLib.Compression_Level'Image (Level)); + + -- Deflate using generic instantiation. + + ZLib.Deflate_Init + (Filter, + Level, + Header => Header); + + Reset; + + Ada.Text_IO.Put + (Stream_Element_Offset'Image (File_Size) & " ->"); + + loop + declare + Buffer : Stream_Element_Array (1 .. 1024); + Last : Stream_Element_Offset; + begin + Read (Filter, Buffer, Last); + + Pack_Size := Pack_Size + Last - Buffer'First + 1; + + exit when Last < Buffer'Last; + end; + end loop; + + Ada.Text_IO.Put_Line (Stream_Element_Offset'Image (Pack_Size)); + + ZLib.Close (Filter); + end loop; + + exit when not Continuous; + + File_Size := File_Size + 1; + end loop; +end Read; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/readme.txt b/src/SDL2/external/zlib-1.2.8/contrib/ada/readme.txt new file mode 100644 index 000000000..ce4d2cadf --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/readme.txt @@ -0,0 +1,65 @@ + ZLib for Ada thick binding (ZLib.Ada) + Release 1.3 + +ZLib.Ada is a thick binding interface to the popular ZLib data +compression library, available at http://www.gzip.org/zlib/. +It provides Ada-style access to the ZLib C library. + + + Here are the main changes since ZLib.Ada 1.2: + +- Attension: ZLib.Read generic routine have a initialization requirement + for Read_Last parameter now. It is a bit incompartible with previous version, + but extends functionality, we could use new parameters Allow_Read_Some and + Flush now. + +- Added Is_Open routines to ZLib and ZLib.Streams packages. + +- Add pragma Assert to check Stream_Element is 8 bit. + +- Fix extraction to buffer with exact known decompressed size. Error reported by + Steve Sangwine. + +- Fix definition of ULong (changed to unsigned_long), fix regression on 64 bits + computers. Patch provided by Pascal Obry. + +- Add Status_Error exception definition. + +- Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit. + + + How to build ZLib.Ada under GNAT + +You should have the ZLib library already build on your computer, before +building ZLib.Ada. Make the directory of ZLib.Ada sources current and +issue the command: + + gnatmake test -largs -L -lz + +Or use the GNAT project file build for GNAT 3.15 or later: + + gnatmake -Pzlib.gpr -L + + + How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2 + +1. Make a project with all *.ads and *.adb files from the distribution. +2. Build the libz.a library from the ZLib C sources. +3. Rename libz.a to z.lib. +4. Add the library z.lib to the project. +5. Add the libc.lib library from the ObjectAda distribution to the project. +6. Build the executable using test.adb as a main procedure. + + + How to use ZLib.Ada + +The source files test.adb and read.adb are small demo programs that show +the main functionality of ZLib.Ada. + +The routines from the package specifications are commented. + + +Homepage: http://zlib-ada.sourceforge.net/ +Author: Dmitriy Anisimkov + +Contributors: Pascal Obry , Steve Sangwine diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/test.adb b/src/SDL2/external/zlib-1.2.8/contrib/ada/test.adb new file mode 100644 index 000000000..90773acfa --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/test.adb @@ -0,0 +1,463 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: test.adb,v 1.17 2003/08/12 12:13:30 vagul Exp $ + +-- The program has a few aims. +-- 1. Test ZLib.Ada95 thick binding functionality. +-- 2. Show the example of use main functionality of the ZLib.Ada95 binding. +-- 3. Build this program automatically compile all ZLib.Ada95 packages under +-- GNAT Ada95 compiler. + +with ZLib.Streams; +with Ada.Streams.Stream_IO; +with Ada.Numerics.Discrete_Random; + +with Ada.Text_IO; + +with Ada.Calendar; + +procedure Test is + + use Ada.Streams; + use Stream_IO; + + ------------------------------------ + -- Test configuration parameters -- + ------------------------------------ + + File_Size : Count := 100_000; + Continuous : constant Boolean := False; + + Header : constant ZLib.Header_Type := ZLib.Default; + -- ZLib.None; + -- ZLib.Auto; + -- ZLib.GZip; + -- Do not use Header other then Default in ZLib versions 1.1.4 + -- and older. + + Strategy : constant ZLib.Strategy_Type := ZLib.Default_Strategy; + Init_Random : constant := 10; + + -- End -- + + In_File_Name : constant String := "testzlib.in"; + -- Name of the input file + + Z_File_Name : constant String := "testzlib.zlb"; + -- Name of the compressed file. + + Out_File_Name : constant String := "testzlib.out"; + -- Name of the decompressed file. + + File_In : File_Type; + File_Out : File_Type; + File_Back : File_Type; + File_Z : ZLib.Streams.Stream_Type; + + Filter : ZLib.Filter_Type; + + Time_Stamp : Ada.Calendar.Time; + + procedure Generate_File; + -- Generate file of spetsified size with some random data. + -- The random data is repeatable, for the good compression. + + procedure Compare_Streams + (Left, Right : in out Root_Stream_Type'Class); + -- The procedure compearing data in 2 streams. + -- It is for compare data before and after compression/decompression. + + procedure Compare_Files (Left, Right : String); + -- Compare files. Based on the Compare_Streams. + + procedure Copy_Streams + (Source, Target : in out Root_Stream_Type'Class; + Buffer_Size : in Stream_Element_Offset := 1024); + -- Copying data from one stream to another. It is for test stream + -- interface of the library. + + procedure Data_In + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset); + -- this procedure is for generic instantiation of + -- ZLib.Generic_Translate. + -- reading data from the File_In. + + procedure Data_Out (Item : in Stream_Element_Array); + -- this procedure is for generic instantiation of + -- ZLib.Generic_Translate. + -- writing data to the File_Out. + + procedure Stamp; + -- Store the timestamp to the local variable. + + procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count); + -- Print the time statistic with the message. + + procedure Translate is new ZLib.Generic_Translate + (Data_In => Data_In, + Data_Out => Data_Out); + -- This procedure is moving data from File_In to File_Out + -- with compression or decompression, depend on initialization of + -- Filter parameter. + + ------------------- + -- Compare_Files -- + ------------------- + + procedure Compare_Files (Left, Right : String) is + Left_File, Right_File : File_Type; + begin + Open (Left_File, In_File, Left); + Open (Right_File, In_File, Right); + Compare_Streams (Stream (Left_File).all, Stream (Right_File).all); + Close (Left_File); + Close (Right_File); + end Compare_Files; + + --------------------- + -- Compare_Streams -- + --------------------- + + procedure Compare_Streams + (Left, Right : in out Ada.Streams.Root_Stream_Type'Class) + is + Left_Buffer, Right_Buffer : Stream_Element_Array (0 .. 16#FFF#); + Left_Last, Right_Last : Stream_Element_Offset; + begin + loop + Read (Left, Left_Buffer, Left_Last); + Read (Right, Right_Buffer, Right_Last); + + if Left_Last /= Right_Last then + Ada.Text_IO.Put_Line ("Compare error :" + & Stream_Element_Offset'Image (Left_Last) + & " /= " + & Stream_Element_Offset'Image (Right_Last)); + + raise Constraint_Error; + + elsif Left_Buffer (0 .. Left_Last) + /= Right_Buffer (0 .. Right_Last) + then + Ada.Text_IO.Put_Line ("ERROR: IN and OUT files is not equal."); + raise Constraint_Error; + + end if; + + exit when Left_Last < Left_Buffer'Last; + end loop; + end Compare_Streams; + + ------------------ + -- Copy_Streams -- + ------------------ + + procedure Copy_Streams + (Source, Target : in out Ada.Streams.Root_Stream_Type'Class; + Buffer_Size : in Stream_Element_Offset := 1024) + is + Buffer : Stream_Element_Array (1 .. Buffer_Size); + Last : Stream_Element_Offset; + begin + loop + Read (Source, Buffer, Last); + Write (Target, Buffer (1 .. Last)); + + exit when Last < Buffer'Last; + end loop; + end Copy_Streams; + + ------------- + -- Data_In -- + ------------- + + procedure Data_In + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) is + begin + Read (File_In, Item, Last); + end Data_In; + + -------------- + -- Data_Out -- + -------------- + + procedure Data_Out (Item : in Stream_Element_Array) is + begin + Write (File_Out, Item); + end Data_Out; + + ------------------- + -- Generate_File -- + ------------------- + + procedure Generate_File is + subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#; + + package Random_Elements is + new Ada.Numerics.Discrete_Random (Visible_Symbols); + + Gen : Random_Elements.Generator; + Buffer : Stream_Element_Array := (1 .. 77 => 16#20#) & 10; + + Buffer_Count : constant Count := File_Size / Buffer'Length; + -- Number of same buffers in the packet. + + Density : constant Count := 30; -- from 0 to Buffer'Length - 2; + + procedure Fill_Buffer (J, D : in Count); + -- Change the part of the buffer. + + ----------------- + -- Fill_Buffer -- + ----------------- + + procedure Fill_Buffer (J, D : in Count) is + begin + for K in 0 .. D loop + Buffer + (Stream_Element_Offset ((J + K) mod (Buffer'Length - 1) + 1)) + := Random_Elements.Random (Gen); + + end loop; + end Fill_Buffer; + + begin + Random_Elements.Reset (Gen, Init_Random); + + Create (File_In, Out_File, In_File_Name); + + Fill_Buffer (1, Buffer'Length - 2); + + for J in 1 .. Buffer_Count loop + Write (File_In, Buffer); + + Fill_Buffer (J, Density); + end loop; + + -- fill remain size. + + Write + (File_In, + Buffer + (1 .. Stream_Element_Offset + (File_Size - Buffer'Length * Buffer_Count))); + + Flush (File_In); + Close (File_In); + end Generate_File; + + --------------------- + -- Print_Statistic -- + --------------------- + + procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count) is + use Ada.Calendar; + use Ada.Text_IO; + + package Count_IO is new Integer_IO (ZLib.Count); + + Curr_Dur : Duration := Clock - Time_Stamp; + begin + Put (Msg); + + Set_Col (20); + Ada.Text_IO.Put ("size ="); + + Count_IO.Put + (Data_Size, + Width => Stream_IO.Count'Image (File_Size)'Length); + + Put_Line (" duration =" & Duration'Image (Curr_Dur)); + end Print_Statistic; + + ----------- + -- Stamp -- + ----------- + + procedure Stamp is + begin + Time_Stamp := Ada.Calendar.Clock; + end Stamp; + +begin + Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version); + + loop + Generate_File; + + for Level in ZLib.Compression_Level'Range loop + + Ada.Text_IO.Put_Line ("Level =" + & ZLib.Compression_Level'Image (Level)); + + -- Test generic interface. + Open (File_In, In_File, In_File_Name); + Create (File_Out, Out_File, Z_File_Name); + + Stamp; + + -- Deflate using generic instantiation. + + ZLib.Deflate_Init + (Filter => Filter, + Level => Level, + Strategy => Strategy, + Header => Header); + + Translate (Filter); + Print_Statistic ("Generic compress", ZLib.Total_Out (Filter)); + ZLib.Close (Filter); + + Close (File_In); + Close (File_Out); + + Open (File_In, In_File, Z_File_Name); + Create (File_Out, Out_File, Out_File_Name); + + Stamp; + + -- Inflate using generic instantiation. + + ZLib.Inflate_Init (Filter, Header => Header); + + Translate (Filter); + Print_Statistic ("Generic decompress", ZLib.Total_Out (Filter)); + + ZLib.Close (Filter); + + Close (File_In); + Close (File_Out); + + Compare_Files (In_File_Name, Out_File_Name); + + -- Test stream interface. + + -- Compress to the back stream. + + Open (File_In, In_File, In_File_Name); + Create (File_Back, Out_File, Z_File_Name); + + Stamp; + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.Out_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => True, + Level => Level, + Strategy => Strategy, + Header => Header); + + Copy_Streams + (Source => Stream (File_In).all, + Target => File_Z); + + -- Flushing internal buffers to the back stream. + + ZLib.Streams.Flush (File_Z, ZLib.Finish); + + Print_Statistic ("Write compress", + ZLib.Streams.Write_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + + Close (File_In); + Close (File_Back); + + -- Compare reading from original file and from + -- decompression stream. + + Open (File_In, In_File, In_File_Name); + Open (File_Back, In_File, Z_File_Name); + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.In_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => True, + Header => Header); + + Stamp; + Compare_Streams (Stream (File_In).all, File_Z); + + Print_Statistic ("Read decompress", + ZLib.Streams.Read_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + Close (File_In); + Close (File_Back); + + -- Compress by reading from compression stream. + + Open (File_Back, In_File, In_File_Name); + Create (File_Out, Out_File, Z_File_Name); + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.In_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => False, + Level => Level, + Strategy => Strategy, + Header => Header); + + Stamp; + Copy_Streams + (Source => File_Z, + Target => Stream (File_Out).all); + + Print_Statistic ("Read compress", + ZLib.Streams.Read_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + + Close (File_Out); + Close (File_Back); + + -- Decompress to decompression stream. + + Open (File_In, In_File, Z_File_Name); + Create (File_Back, Out_File, Out_File_Name); + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.Out_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => False, + Header => Header); + + Stamp; + + Copy_Streams + (Source => Stream (File_In).all, + Target => File_Z); + + Print_Statistic ("Write decompress", + ZLib.Streams.Write_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + Close (File_In); + Close (File_Back); + + Compare_Files (In_File_Name, Out_File_Name); + end loop; + + Ada.Text_IO.Put_Line (Count'Image (File_Size) & " Ok."); + + exit when not Continuous; + + File_Size := File_Size + 1; + end loop; +end Test; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-streams.adb b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-streams.adb new file mode 100644 index 000000000..b6497bae2 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-streams.adb @@ -0,0 +1,225 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: zlib-streams.adb,v 1.10 2004/05/31 10:53:40 vagul Exp $ + +with Ada.Unchecked_Deallocation; + +package body ZLib.Streams is + + ----------- + -- Close -- + ----------- + + procedure Close (Stream : in out Stream_Type) is + procedure Free is new Ada.Unchecked_Deallocation + (Stream_Element_Array, Buffer_Access); + begin + if Stream.Mode = Out_Stream or Stream.Mode = Duplex then + -- We should flush the data written by the writer. + + Flush (Stream, Finish); + + Close (Stream.Writer); + end if; + + if Stream.Mode = In_Stream or Stream.Mode = Duplex then + Close (Stream.Reader); + Free (Stream.Buffer); + end if; + end Close; + + ------------ + -- Create -- + ------------ + + procedure Create + (Stream : out Stream_Type; + Mode : in Stream_Mode; + Back : in Stream_Access; + Back_Compressed : in Boolean; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Header : in Header_Type := Default; + Read_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size; + Write_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size) + is + + subtype Buffer_Subtype is Stream_Element_Array (1 .. Read_Buffer_Size); + + procedure Init_Filter + (Filter : in out Filter_Type; + Compress : in Boolean); + + ----------------- + -- Init_Filter -- + ----------------- + + procedure Init_Filter + (Filter : in out Filter_Type; + Compress : in Boolean) is + begin + if Compress then + Deflate_Init + (Filter, Level, Strategy, Header => Header); + else + Inflate_Init (Filter, Header => Header); + end if; + end Init_Filter; + + begin + Stream.Back := Back; + Stream.Mode := Mode; + + if Mode = Out_Stream or Mode = Duplex then + Init_Filter (Stream.Writer, Back_Compressed); + Stream.Buffer_Size := Write_Buffer_Size; + else + Stream.Buffer_Size := 0; + end if; + + if Mode = In_Stream or Mode = Duplex then + Init_Filter (Stream.Reader, not Back_Compressed); + + Stream.Buffer := new Buffer_Subtype; + Stream.Rest_First := Stream.Buffer'Last + 1; + Stream.Rest_Last := Stream.Buffer'Last; + end if; + end Create; + + ----------- + -- Flush -- + ----------- + + procedure Flush + (Stream : in out Stream_Type; + Mode : in Flush_Mode := Sync_Flush) + is + Buffer : Stream_Element_Array (1 .. Stream.Buffer_Size); + Last : Stream_Element_Offset; + begin + loop + Flush (Stream.Writer, Buffer, Last, Mode); + + Ada.Streams.Write (Stream.Back.all, Buffer (1 .. Last)); + + exit when Last < Buffer'Last; + end loop; + end Flush; + + ------------- + -- Is_Open -- + ------------- + + function Is_Open (Stream : Stream_Type) return Boolean is + begin + return Is_Open (Stream.Reader) or else Is_Open (Stream.Writer); + end Is_Open; + + ---------- + -- Read -- + ---------- + + procedure Read + (Stream : in out Stream_Type; + Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) + is + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset); + + ---------- + -- Read -- + ---------- + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) is + begin + Ada.Streams.Read (Stream.Back.all, Item, Last); + end Read; + + procedure Read is new ZLib.Read + (Read => Read, + Buffer => Stream.Buffer.all, + Rest_First => Stream.Rest_First, + Rest_Last => Stream.Rest_Last); + + begin + Read (Stream.Reader, Item, Last); + end Read; + + ------------------- + -- Read_Total_In -- + ------------------- + + function Read_Total_In (Stream : in Stream_Type) return Count is + begin + return Total_In (Stream.Reader); + end Read_Total_In; + + -------------------- + -- Read_Total_Out -- + -------------------- + + function Read_Total_Out (Stream : in Stream_Type) return Count is + begin + return Total_Out (Stream.Reader); + end Read_Total_Out; + + ----------- + -- Write -- + ----------- + + procedure Write + (Stream : in out Stream_Type; + Item : in Stream_Element_Array) + is + + procedure Write (Item : in Stream_Element_Array); + + ----------- + -- Write -- + ----------- + + procedure Write (Item : in Stream_Element_Array) is + begin + Ada.Streams.Write (Stream.Back.all, Item); + end Write; + + procedure Write is new ZLib.Write + (Write => Write, + Buffer_Size => Stream.Buffer_Size); + + begin + Write (Stream.Writer, Item, No_Flush); + end Write; + + -------------------- + -- Write_Total_In -- + -------------------- + + function Write_Total_In (Stream : in Stream_Type) return Count is + begin + return Total_In (Stream.Writer); + end Write_Total_In; + + --------------------- + -- Write_Total_Out -- + --------------------- + + function Write_Total_Out (Stream : in Stream_Type) return Count is + begin + return Total_Out (Stream.Writer); + end Write_Total_Out; + +end ZLib.Streams; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-streams.ads b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-streams.ads new file mode 100644 index 000000000..f0193c6ba --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-streams.ads @@ -0,0 +1,114 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: zlib-streams.ads,v 1.12 2004/05/31 10:53:40 vagul Exp $ + +package ZLib.Streams is + + type Stream_Mode is (In_Stream, Out_Stream, Duplex); + + type Stream_Access is access all Ada.Streams.Root_Stream_Type'Class; + + type Stream_Type is + new Ada.Streams.Root_Stream_Type with private; + + procedure Read + (Stream : in out Stream_Type; + Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + + procedure Write + (Stream : in out Stream_Type; + Item : in Ada.Streams.Stream_Element_Array); + + procedure Flush + (Stream : in out Stream_Type; + Mode : in Flush_Mode := Sync_Flush); + -- Flush the written data to the back stream, + -- all data placed to the compressor is flushing to the Back stream. + -- Should not be used untill necessary, becouse it is decreasing + -- compression. + + function Read_Total_In (Stream : in Stream_Type) return Count; + pragma Inline (Read_Total_In); + -- Return total number of bytes read from back stream so far. + + function Read_Total_Out (Stream : in Stream_Type) return Count; + pragma Inline (Read_Total_Out); + -- Return total number of bytes read so far. + + function Write_Total_In (Stream : in Stream_Type) return Count; + pragma Inline (Write_Total_In); + -- Return total number of bytes written so far. + + function Write_Total_Out (Stream : in Stream_Type) return Count; + pragma Inline (Write_Total_Out); + -- Return total number of bytes written to the back stream. + + procedure Create + (Stream : out Stream_Type; + Mode : in Stream_Mode; + Back : in Stream_Access; + Back_Compressed : in Boolean; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Header : in Header_Type := Default; + Read_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size; + Write_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size); + -- Create the Comression/Decompression stream. + -- If mode is In_Stream then Write operation is disabled. + -- If mode is Out_Stream then Read operation is disabled. + + -- If Back_Compressed is true then + -- Data written to the Stream is compressing to the Back stream + -- and data read from the Stream is decompressed data from the Back stream. + + -- If Back_Compressed is false then + -- Data written to the Stream is decompressing to the Back stream + -- and data read from the Stream is compressed data from the Back stream. + + -- !!! When the Need_Header is False ZLib-Ada is using undocumented + -- ZLib 1.1.4 functionality to do not create/wait for ZLib headers. + + function Is_Open (Stream : Stream_Type) return Boolean; + + procedure Close (Stream : in out Stream_Type); + +private + + use Ada.Streams; + + type Buffer_Access is access all Stream_Element_Array; + + type Stream_Type + is new Root_Stream_Type with + record + Mode : Stream_Mode; + + Buffer : Buffer_Access; + Rest_First : Stream_Element_Offset; + Rest_Last : Stream_Element_Offset; + -- Buffer for Read operation. + -- We need to have this buffer in the record + -- becouse not all read data from back stream + -- could be processed during the read operation. + + Buffer_Size : Stream_Element_Offset; + -- Buffer size for write operation. + -- We do not need to have this buffer + -- in the record becouse all data could be + -- processed in the write operation. + + Back : Stream_Access; + Reader : Filter_Type; + Writer : Filter_Type; + end record; + +end ZLib.Streams; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-thin.adb b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-thin.adb new file mode 100644 index 000000000..0ca4a7120 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-thin.adb @@ -0,0 +1,141 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: zlib-thin.adb,v 1.8 2003/12/14 18:27:31 vagul Exp $ + +package body ZLib.Thin is + + ZLIB_VERSION : constant Chars_Ptr := zlibVersion; + + Z_Stream_Size : constant Int := Z_Stream'Size / System.Storage_Unit; + + -------------- + -- Avail_In -- + -------------- + + function Avail_In (Strm : in Z_Stream) return UInt is + begin + return Strm.Avail_In; + end Avail_In; + + --------------- + -- Avail_Out -- + --------------- + + function Avail_Out (Strm : in Z_Stream) return UInt is + begin + return Strm.Avail_Out; + end Avail_Out; + + ------------------ + -- Deflate_Init -- + ------------------ + + function Deflate_Init + (strm : Z_Streamp; + level : Int; + method : Int; + windowBits : Int; + memLevel : Int; + strategy : Int) + return Int is + begin + return deflateInit2 + (strm, + level, + method, + windowBits, + memLevel, + strategy, + ZLIB_VERSION, + Z_Stream_Size); + end Deflate_Init; + + ------------------ + -- Inflate_Init -- + ------------------ + + function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int is + begin + return inflateInit2 (strm, windowBits, ZLIB_VERSION, Z_Stream_Size); + end Inflate_Init; + + ------------------------ + -- Last_Error_Message -- + ------------------------ + + function Last_Error_Message (Strm : in Z_Stream) return String is + use Interfaces.C.Strings; + begin + if Strm.msg = Null_Ptr then + return ""; + else + return Value (Strm.msg); + end if; + end Last_Error_Message; + + ------------ + -- Set_In -- + ------------ + + procedure Set_In + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt) is + begin + Strm.Next_In := Buffer; + Strm.Avail_In := Size; + end Set_In; + + ------------------ + -- Set_Mem_Func -- + ------------------ + + procedure Set_Mem_Func + (Strm : in out Z_Stream; + Opaque : in Voidp; + Alloc : in alloc_func; + Free : in free_func) is + begin + Strm.opaque := Opaque; + Strm.zalloc := Alloc; + Strm.zfree := Free; + end Set_Mem_Func; + + ------------- + -- Set_Out -- + ------------- + + procedure Set_Out + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt) is + begin + Strm.Next_Out := Buffer; + Strm.Avail_Out := Size; + end Set_Out; + + -------------- + -- Total_In -- + -------------- + + function Total_In (Strm : in Z_Stream) return ULong is + begin + return Strm.Total_In; + end Total_In; + + --------------- + -- Total_Out -- + --------------- + + function Total_Out (Strm : in Z_Stream) return ULong is + begin + return Strm.Total_Out; + end Total_Out; + +end ZLib.Thin; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-thin.ads b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-thin.ads new file mode 100644 index 000000000..d4407eb80 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib-thin.ads @@ -0,0 +1,450 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: zlib-thin.ads,v 1.11 2004/07/23 06:33:11 vagul Exp $ + +with Interfaces.C.Strings; + +with System; + +private package ZLib.Thin is + + -- From zconf.h + + MAX_MEM_LEVEL : constant := 9; -- zconf.h:105 + -- zconf.h:105 + MAX_WBITS : constant := 15; -- zconf.h:115 + -- 32K LZ77 window + -- zconf.h:115 + SEEK_SET : constant := 8#0000#; -- zconf.h:244 + -- Seek from beginning of file. + -- zconf.h:244 + SEEK_CUR : constant := 1; -- zconf.h:245 + -- Seek from current position. + -- zconf.h:245 + SEEK_END : constant := 2; -- zconf.h:246 + -- Set file pointer to EOF plus "offset" + -- zconf.h:246 + + type Byte is new Interfaces.C.unsigned_char; -- 8 bits + -- zconf.h:214 + type UInt is new Interfaces.C.unsigned; -- 16 bits or more + -- zconf.h:216 + type Int is new Interfaces.C.int; + + type ULong is new Interfaces.C.unsigned_long; -- 32 bits or more + -- zconf.h:217 + subtype Chars_Ptr is Interfaces.C.Strings.chars_ptr; + + type ULong_Access is access ULong; + type Int_Access is access Int; + + subtype Voidp is System.Address; -- zconf.h:232 + + subtype Byte_Access is Voidp; + + Nul : constant Voidp := System.Null_Address; + -- end from zconf + + Z_NO_FLUSH : constant := 8#0000#; -- zlib.h:125 + -- zlib.h:125 + Z_PARTIAL_FLUSH : constant := 1; -- zlib.h:126 + -- will be removed, use + -- Z_SYNC_FLUSH instead + -- zlib.h:126 + Z_SYNC_FLUSH : constant := 2; -- zlib.h:127 + -- zlib.h:127 + Z_FULL_FLUSH : constant := 3; -- zlib.h:128 + -- zlib.h:128 + Z_FINISH : constant := 4; -- zlib.h:129 + -- zlib.h:129 + Z_OK : constant := 8#0000#; -- zlib.h:132 + -- zlib.h:132 + Z_STREAM_END : constant := 1; -- zlib.h:133 + -- zlib.h:133 + Z_NEED_DICT : constant := 2; -- zlib.h:134 + -- zlib.h:134 + Z_ERRNO : constant := -1; -- zlib.h:135 + -- zlib.h:135 + Z_STREAM_ERROR : constant := -2; -- zlib.h:136 + -- zlib.h:136 + Z_DATA_ERROR : constant := -3; -- zlib.h:137 + -- zlib.h:137 + Z_MEM_ERROR : constant := -4; -- zlib.h:138 + -- zlib.h:138 + Z_BUF_ERROR : constant := -5; -- zlib.h:139 + -- zlib.h:139 + Z_VERSION_ERROR : constant := -6; -- zlib.h:140 + -- zlib.h:140 + Z_NO_COMPRESSION : constant := 8#0000#; -- zlib.h:145 + -- zlib.h:145 + Z_BEST_SPEED : constant := 1; -- zlib.h:146 + -- zlib.h:146 + Z_BEST_COMPRESSION : constant := 9; -- zlib.h:147 + -- zlib.h:147 + Z_DEFAULT_COMPRESSION : constant := -1; -- zlib.h:148 + -- zlib.h:148 + Z_FILTERED : constant := 1; -- zlib.h:151 + -- zlib.h:151 + Z_HUFFMAN_ONLY : constant := 2; -- zlib.h:152 + -- zlib.h:152 + Z_DEFAULT_STRATEGY : constant := 8#0000#; -- zlib.h:153 + -- zlib.h:153 + Z_BINARY : constant := 8#0000#; -- zlib.h:156 + -- zlib.h:156 + Z_ASCII : constant := 1; -- zlib.h:157 + -- zlib.h:157 + Z_UNKNOWN : constant := 2; -- zlib.h:158 + -- zlib.h:158 + Z_DEFLATED : constant := 8; -- zlib.h:161 + -- zlib.h:161 + Z_NULL : constant := 8#0000#; -- zlib.h:164 + -- for initializing zalloc, zfree, opaque + -- zlib.h:164 + type gzFile is new Voidp; -- zlib.h:646 + + type Z_Stream is private; + + type Z_Streamp is access all Z_Stream; -- zlib.h:89 + + type alloc_func is access function + (Opaque : Voidp; + Items : UInt; + Size : UInt) + return Voidp; -- zlib.h:63 + + type free_func is access procedure (opaque : Voidp; address : Voidp); + + function zlibVersion return Chars_Ptr; + + function Deflate (strm : Z_Streamp; flush : Int) return Int; + + function DeflateEnd (strm : Z_Streamp) return Int; + + function Inflate (strm : Z_Streamp; flush : Int) return Int; + + function InflateEnd (strm : Z_Streamp) return Int; + + function deflateSetDictionary + (strm : Z_Streamp; + dictionary : Byte_Access; + dictLength : UInt) + return Int; + + function deflateCopy (dest : Z_Streamp; source : Z_Streamp) return Int; + -- zlib.h:478 + + function deflateReset (strm : Z_Streamp) return Int; -- zlib.h:495 + + function deflateParams + (strm : Z_Streamp; + level : Int; + strategy : Int) + return Int; -- zlib.h:506 + + function inflateSetDictionary + (strm : Z_Streamp; + dictionary : Byte_Access; + dictLength : UInt) + return Int; -- zlib.h:548 + + function inflateSync (strm : Z_Streamp) return Int; -- zlib.h:565 + + function inflateReset (strm : Z_Streamp) return Int; -- zlib.h:580 + + function compress + (dest : Byte_Access; + destLen : ULong_Access; + source : Byte_Access; + sourceLen : ULong) + return Int; -- zlib.h:601 + + function compress2 + (dest : Byte_Access; + destLen : ULong_Access; + source : Byte_Access; + sourceLen : ULong; + level : Int) + return Int; -- zlib.h:615 + + function uncompress + (dest : Byte_Access; + destLen : ULong_Access; + source : Byte_Access; + sourceLen : ULong) + return Int; + + function gzopen (path : Chars_Ptr; mode : Chars_Ptr) return gzFile; + + function gzdopen (fd : Int; mode : Chars_Ptr) return gzFile; + + function gzsetparams + (file : gzFile; + level : Int; + strategy : Int) + return Int; + + function gzread + (file : gzFile; + buf : Voidp; + len : UInt) + return Int; + + function gzwrite + (file : in gzFile; + buf : in Voidp; + len : in UInt) + return Int; + + function gzprintf (file : in gzFile; format : in Chars_Ptr) return Int; + + function gzputs (file : in gzFile; s : in Chars_Ptr) return Int; + + function gzgets + (file : gzFile; + buf : Chars_Ptr; + len : Int) + return Chars_Ptr; + + function gzputc (file : gzFile; char : Int) return Int; + + function gzgetc (file : gzFile) return Int; + + function gzflush (file : gzFile; flush : Int) return Int; + + function gzseek + (file : gzFile; + offset : Int; + whence : Int) + return Int; + + function gzrewind (file : gzFile) return Int; + + function gztell (file : gzFile) return Int; + + function gzeof (file : gzFile) return Int; + + function gzclose (file : gzFile) return Int; + + function gzerror (file : gzFile; errnum : Int_Access) return Chars_Ptr; + + function adler32 + (adler : ULong; + buf : Byte_Access; + len : UInt) + return ULong; + + function crc32 + (crc : ULong; + buf : Byte_Access; + len : UInt) + return ULong; + + function deflateInit + (strm : Z_Streamp; + level : Int; + version : Chars_Ptr; + stream_size : Int) + return Int; + + function deflateInit2 + (strm : Z_Streamp; + level : Int; + method : Int; + windowBits : Int; + memLevel : Int; + strategy : Int; + version : Chars_Ptr; + stream_size : Int) + return Int; + + function Deflate_Init + (strm : Z_Streamp; + level : Int; + method : Int; + windowBits : Int; + memLevel : Int; + strategy : Int) + return Int; + pragma Inline (Deflate_Init); + + function inflateInit + (strm : Z_Streamp; + version : Chars_Ptr; + stream_size : Int) + return Int; + + function inflateInit2 + (strm : in Z_Streamp; + windowBits : in Int; + version : in Chars_Ptr; + stream_size : in Int) + return Int; + + function inflateBackInit + (strm : in Z_Streamp; + windowBits : in Int; + window : in Byte_Access; + version : in Chars_Ptr; + stream_size : in Int) + return Int; + -- Size of window have to be 2**windowBits. + + function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int; + pragma Inline (Inflate_Init); + + function zError (err : Int) return Chars_Ptr; + + function inflateSyncPoint (z : Z_Streamp) return Int; + + function get_crc_table return ULong_Access; + + -- Interface to the available fields of the z_stream structure. + -- The application must update next_in and avail_in when avail_in has + -- dropped to zero. It must update next_out and avail_out when avail_out + -- has dropped to zero. The application must initialize zalloc, zfree and + -- opaque before calling the init function. + + procedure Set_In + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt); + pragma Inline (Set_In); + + procedure Set_Out + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt); + pragma Inline (Set_Out); + + procedure Set_Mem_Func + (Strm : in out Z_Stream; + Opaque : in Voidp; + Alloc : in alloc_func; + Free : in free_func); + pragma Inline (Set_Mem_Func); + + function Last_Error_Message (Strm : in Z_Stream) return String; + pragma Inline (Last_Error_Message); + + function Avail_Out (Strm : in Z_Stream) return UInt; + pragma Inline (Avail_Out); + + function Avail_In (Strm : in Z_Stream) return UInt; + pragma Inline (Avail_In); + + function Total_In (Strm : in Z_Stream) return ULong; + pragma Inline (Total_In); + + function Total_Out (Strm : in Z_Stream) return ULong; + pragma Inline (Total_Out); + + function inflateCopy + (dest : in Z_Streamp; + Source : in Z_Streamp) + return Int; + + function compressBound (Source_Len : in ULong) return ULong; + + function deflateBound + (Strm : in Z_Streamp; + Source_Len : in ULong) + return ULong; + + function gzungetc (C : in Int; File : in gzFile) return Int; + + function zlibCompileFlags return ULong; + +private + + type Z_Stream is record -- zlib.h:68 + Next_In : Voidp := Nul; -- next input byte + Avail_In : UInt := 0; -- number of bytes available at next_in + Total_In : ULong := 0; -- total nb of input bytes read so far + Next_Out : Voidp := Nul; -- next output byte should be put there + Avail_Out : UInt := 0; -- remaining free space at next_out + Total_Out : ULong := 0; -- total nb of bytes output so far + msg : Chars_Ptr; -- last error message, NULL if no error + state : Voidp; -- not visible by applications + zalloc : alloc_func := null; -- used to allocate the internal state + zfree : free_func := null; -- used to free the internal state + opaque : Voidp; -- private data object passed to + -- zalloc and zfree + data_type : Int; -- best guess about the data type: + -- ascii or binary + adler : ULong; -- adler32 value of the uncompressed + -- data + reserved : ULong; -- reserved for future use + end record; + + pragma Convention (C, Z_Stream); + + pragma Import (C, zlibVersion, "zlibVersion"); + pragma Import (C, Deflate, "deflate"); + pragma Import (C, DeflateEnd, "deflateEnd"); + pragma Import (C, Inflate, "inflate"); + pragma Import (C, InflateEnd, "inflateEnd"); + pragma Import (C, deflateSetDictionary, "deflateSetDictionary"); + pragma Import (C, deflateCopy, "deflateCopy"); + pragma Import (C, deflateReset, "deflateReset"); + pragma Import (C, deflateParams, "deflateParams"); + pragma Import (C, inflateSetDictionary, "inflateSetDictionary"); + pragma Import (C, inflateSync, "inflateSync"); + pragma Import (C, inflateReset, "inflateReset"); + pragma Import (C, compress, "compress"); + pragma Import (C, compress2, "compress2"); + pragma Import (C, uncompress, "uncompress"); + pragma Import (C, gzopen, "gzopen"); + pragma Import (C, gzdopen, "gzdopen"); + pragma Import (C, gzsetparams, "gzsetparams"); + pragma Import (C, gzread, "gzread"); + pragma Import (C, gzwrite, "gzwrite"); + pragma Import (C, gzprintf, "gzprintf"); + pragma Import (C, gzputs, "gzputs"); + pragma Import (C, gzgets, "gzgets"); + pragma Import (C, gzputc, "gzputc"); + pragma Import (C, gzgetc, "gzgetc"); + pragma Import (C, gzflush, "gzflush"); + pragma Import (C, gzseek, "gzseek"); + pragma Import (C, gzrewind, "gzrewind"); + pragma Import (C, gztell, "gztell"); + pragma Import (C, gzeof, "gzeof"); + pragma Import (C, gzclose, "gzclose"); + pragma Import (C, gzerror, "gzerror"); + pragma Import (C, adler32, "adler32"); + pragma Import (C, crc32, "crc32"); + pragma Import (C, deflateInit, "deflateInit_"); + pragma Import (C, inflateInit, "inflateInit_"); + pragma Import (C, deflateInit2, "deflateInit2_"); + pragma Import (C, inflateInit2, "inflateInit2_"); + pragma Import (C, zError, "zError"); + pragma Import (C, inflateSyncPoint, "inflateSyncPoint"); + pragma Import (C, get_crc_table, "get_crc_table"); + + -- since zlib 1.2.0: + + pragma Import (C, inflateCopy, "inflateCopy"); + pragma Import (C, compressBound, "compressBound"); + pragma Import (C, deflateBound, "deflateBound"); + pragma Import (C, gzungetc, "gzungetc"); + pragma Import (C, zlibCompileFlags, "zlibCompileFlags"); + + pragma Import (C, inflateBackInit, "inflateBackInit_"); + + -- I stopped binding the inflateBack routines, becouse realize that + -- it does not support zlib and gzip headers for now, and have no + -- symmetric deflateBack routines. + -- ZLib-Ada is symmetric regarding deflate/inflate data transformation + -- and has a similar generic callback interface for the + -- deflate/inflate transformation based on the regular Deflate/Inflate + -- routines. + + -- pragma Import (C, inflateBack, "inflateBack"); + -- pragma Import (C, inflateBackEnd, "inflateBackEnd"); + +end ZLib.Thin; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.adb b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.adb new file mode 100644 index 000000000..8b6fd686a --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.adb @@ -0,0 +1,701 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2004 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: zlib.adb,v 1.31 2004/09/06 06:53:19 vagul Exp $ + +with Ada.Exceptions; +with Ada.Unchecked_Conversion; +with Ada.Unchecked_Deallocation; + +with Interfaces.C.Strings; + +with ZLib.Thin; + +package body ZLib is + + use type Thin.Int; + + type Z_Stream is new Thin.Z_Stream; + + type Return_Code_Enum is + (OK, + STREAM_END, + NEED_DICT, + ERRNO, + STREAM_ERROR, + DATA_ERROR, + MEM_ERROR, + BUF_ERROR, + VERSION_ERROR); + + type Flate_Step_Function is access + function (Strm : in Thin.Z_Streamp; Flush : in Thin.Int) return Thin.Int; + pragma Convention (C, Flate_Step_Function); + + type Flate_End_Function is access + function (Ctrm : in Thin.Z_Streamp) return Thin.Int; + pragma Convention (C, Flate_End_Function); + + type Flate_Type is record + Step : Flate_Step_Function; + Done : Flate_End_Function; + end record; + + subtype Footer_Array is Stream_Element_Array (1 .. 8); + + Simple_GZip_Header : constant Stream_Element_Array (1 .. 10) + := (16#1f#, 16#8b#, -- Magic header + 16#08#, -- Z_DEFLATED + 16#00#, -- Flags + 16#00#, 16#00#, 16#00#, 16#00#, -- Time + 16#00#, -- XFlags + 16#03# -- OS code + ); + -- The simplest gzip header is not for informational, but just for + -- gzip format compatibility. + -- Note that some code below is using assumption + -- Simple_GZip_Header'Last > Footer_Array'Last, so do not make + -- Simple_GZip_Header'Last <= Footer_Array'Last. + + Return_Code : constant array (Thin.Int range <>) of Return_Code_Enum + := (0 => OK, + 1 => STREAM_END, + 2 => NEED_DICT, + -1 => ERRNO, + -2 => STREAM_ERROR, + -3 => DATA_ERROR, + -4 => MEM_ERROR, + -5 => BUF_ERROR, + -6 => VERSION_ERROR); + + Flate : constant array (Boolean) of Flate_Type + := (True => (Step => Thin.Deflate'Access, + Done => Thin.DeflateEnd'Access), + False => (Step => Thin.Inflate'Access, + Done => Thin.InflateEnd'Access)); + + Flush_Finish : constant array (Boolean) of Flush_Mode + := (True => Finish, False => No_Flush); + + procedure Raise_Error (Stream : in Z_Stream); + pragma Inline (Raise_Error); + + procedure Raise_Error (Message : in String); + pragma Inline (Raise_Error); + + procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int); + + procedure Free is new Ada.Unchecked_Deallocation + (Z_Stream, Z_Stream_Access); + + function To_Thin_Access is new Ada.Unchecked_Conversion + (Z_Stream_Access, Thin.Z_Streamp); + + procedure Translate_GZip + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + -- Separate translate routine for make gzip header. + + procedure Translate_Auto + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + -- translate routine without additional headers. + + ----------------- + -- Check_Error -- + ----------------- + + procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int) is + use type Thin.Int; + begin + if Code /= Thin.Z_OK then + Raise_Error + (Return_Code_Enum'Image (Return_Code (Code)) + & ": " & Last_Error_Message (Stream)); + end if; + end Check_Error; + + ----------- + -- Close -- + ----------- + + procedure Close + (Filter : in out Filter_Type; + Ignore_Error : in Boolean := False) + is + Code : Thin.Int; + begin + if not Ignore_Error and then not Is_Open (Filter) then + raise Status_Error; + end if; + + Code := Flate (Filter.Compression).Done (To_Thin_Access (Filter.Strm)); + + if Ignore_Error or else Code = Thin.Z_OK then + Free (Filter.Strm); + else + declare + Error_Message : constant String + := Last_Error_Message (Filter.Strm.all); + begin + Free (Filter.Strm); + Ada.Exceptions.Raise_Exception + (ZLib_Error'Identity, + Return_Code_Enum'Image (Return_Code (Code)) + & ": " & Error_Message); + end; + end if; + end Close; + + ----------- + -- CRC32 -- + ----------- + + function CRC32 + (CRC : in Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array) + return Unsigned_32 + is + use Thin; + begin + return Unsigned_32 (crc32 (ULong (CRC), + Data'Address, + Data'Length)); + end CRC32; + + procedure CRC32 + (CRC : in out Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array) is + begin + CRC := CRC32 (CRC, Data); + end CRC32; + + ------------------ + -- Deflate_Init -- + ------------------ + + procedure Deflate_Init + (Filter : in out Filter_Type; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Method : in Compression_Method := Deflated; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Memory_Level : in Memory_Level_Type := Default_Memory_Level; + Header : in Header_Type := Default) + is + use type Thin.Int; + Win_Bits : Thin.Int := Thin.Int (Window_Bits); + begin + if Is_Open (Filter) then + raise Status_Error; + end if; + + -- We allow ZLib to make header only in case of default header type. + -- Otherwise we would either do header by ourselfs, or do not do + -- header at all. + + if Header = None or else Header = GZip then + Win_Bits := -Win_Bits; + end if; + + -- For the GZip CRC calculation and make headers. + + if Header = GZip then + Filter.CRC := 0; + Filter.Offset := Simple_GZip_Header'First; + else + Filter.Offset := Simple_GZip_Header'Last + 1; + end if; + + Filter.Strm := new Z_Stream; + Filter.Compression := True; + Filter.Stream_End := False; + Filter.Header := Header; + + if Thin.Deflate_Init + (To_Thin_Access (Filter.Strm), + Level => Thin.Int (Level), + method => Thin.Int (Method), + windowBits => Win_Bits, + memLevel => Thin.Int (Memory_Level), + strategy => Thin.Int (Strategy)) /= Thin.Z_OK + then + Raise_Error (Filter.Strm.all); + end if; + end Deflate_Init; + + ----------- + -- Flush -- + ----------- + + procedure Flush + (Filter : in out Filter_Type; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) + is + No_Data : Stream_Element_Array := (1 .. 0 => 0); + Last : Stream_Element_Offset; + begin + Translate (Filter, No_Data, Last, Out_Data, Out_Last, Flush); + end Flush; + + ----------------------- + -- Generic_Translate -- + ----------------------- + + procedure Generic_Translate + (Filter : in out ZLib.Filter_Type; + In_Buffer_Size : in Integer := Default_Buffer_Size; + Out_Buffer_Size : in Integer := Default_Buffer_Size) + is + In_Buffer : Stream_Element_Array + (1 .. Stream_Element_Offset (In_Buffer_Size)); + Out_Buffer : Stream_Element_Array + (1 .. Stream_Element_Offset (Out_Buffer_Size)); + Last : Stream_Element_Offset; + In_Last : Stream_Element_Offset; + In_First : Stream_Element_Offset; + Out_Last : Stream_Element_Offset; + begin + Main : loop + Data_In (In_Buffer, Last); + + In_First := In_Buffer'First; + + loop + Translate + (Filter => Filter, + In_Data => In_Buffer (In_First .. Last), + In_Last => In_Last, + Out_Data => Out_Buffer, + Out_Last => Out_Last, + Flush => Flush_Finish (Last < In_Buffer'First)); + + if Out_Buffer'First <= Out_Last then + Data_Out (Out_Buffer (Out_Buffer'First .. Out_Last)); + end if; + + exit Main when Stream_End (Filter); + + -- The end of in buffer. + + exit when In_Last = Last; + + In_First := In_Last + 1; + end loop; + end loop Main; + + end Generic_Translate; + + ------------------ + -- Inflate_Init -- + ------------------ + + procedure Inflate_Init + (Filter : in out Filter_Type; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Header : in Header_Type := Default) + is + use type Thin.Int; + Win_Bits : Thin.Int := Thin.Int (Window_Bits); + + procedure Check_Version; + -- Check the latest header types compatibility. + + procedure Check_Version is + begin + if Version <= "1.1.4" then + Raise_Error + ("Inflate header type " & Header_Type'Image (Header) + & " incompatible with ZLib version " & Version); + end if; + end Check_Version; + + begin + if Is_Open (Filter) then + raise Status_Error; + end if; + + case Header is + when None => + Check_Version; + + -- Inflate data without headers determined + -- by negative Win_Bits. + + Win_Bits := -Win_Bits; + when GZip => + Check_Version; + + -- Inflate gzip data defined by flag 16. + + Win_Bits := Win_Bits + 16; + when Auto => + Check_Version; + + -- Inflate with automatic detection + -- of gzip or native header defined by flag 32. + + Win_Bits := Win_Bits + 32; + when Default => null; + end case; + + Filter.Strm := new Z_Stream; + Filter.Compression := False; + Filter.Stream_End := False; + Filter.Header := Header; + + if Thin.Inflate_Init + (To_Thin_Access (Filter.Strm), Win_Bits) /= Thin.Z_OK + then + Raise_Error (Filter.Strm.all); + end if; + end Inflate_Init; + + ------------- + -- Is_Open -- + ------------- + + function Is_Open (Filter : in Filter_Type) return Boolean is + begin + return Filter.Strm /= null; + end Is_Open; + + ----------------- + -- Raise_Error -- + ----------------- + + procedure Raise_Error (Message : in String) is + begin + Ada.Exceptions.Raise_Exception (ZLib_Error'Identity, Message); + end Raise_Error; + + procedure Raise_Error (Stream : in Z_Stream) is + begin + Raise_Error (Last_Error_Message (Stream)); + end Raise_Error; + + ---------- + -- Read -- + ---------- + + procedure Read + (Filter : in out Filter_Type; + Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode := No_Flush) + is + In_Last : Stream_Element_Offset; + Item_First : Ada.Streams.Stream_Element_Offset := Item'First; + V_Flush : Flush_Mode := Flush; + + begin + pragma Assert (Rest_First in Buffer'First .. Buffer'Last + 1); + pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last); + + loop + if Rest_Last = Buffer'First - 1 then + V_Flush := Finish; + + elsif Rest_First > Rest_Last then + Read (Buffer, Rest_Last); + Rest_First := Buffer'First; + + if Rest_Last < Buffer'First then + V_Flush := Finish; + end if; + end if; + + Translate + (Filter => Filter, + In_Data => Buffer (Rest_First .. Rest_Last), + In_Last => In_Last, + Out_Data => Item (Item_First .. Item'Last), + Out_Last => Last, + Flush => V_Flush); + + Rest_First := In_Last + 1; + + exit when Stream_End (Filter) + or else Last = Item'Last + or else (Last >= Item'First and then Allow_Read_Some); + + Item_First := Last + 1; + end loop; + end Read; + + ---------------- + -- Stream_End -- + ---------------- + + function Stream_End (Filter : in Filter_Type) return Boolean is + begin + if Filter.Header = GZip and Filter.Compression then + return Filter.Stream_End + and then Filter.Offset = Footer_Array'Last + 1; + else + return Filter.Stream_End; + end if; + end Stream_End; + + -------------- + -- Total_In -- + -------------- + + function Total_In (Filter : in Filter_Type) return Count is + begin + return Count (Thin.Total_In (To_Thin_Access (Filter.Strm).all)); + end Total_In; + + --------------- + -- Total_Out -- + --------------- + + function Total_Out (Filter : in Filter_Type) return Count is + begin + return Count (Thin.Total_Out (To_Thin_Access (Filter.Strm).all)); + end Total_Out; + + --------------- + -- Translate -- + --------------- + + procedure Translate + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) is + begin + if Filter.Header = GZip and then Filter.Compression then + Translate_GZip + (Filter => Filter, + In_Data => In_Data, + In_Last => In_Last, + Out_Data => Out_Data, + Out_Last => Out_Last, + Flush => Flush); + else + Translate_Auto + (Filter => Filter, + In_Data => In_Data, + In_Last => In_Last, + Out_Data => Out_Data, + Out_Last => Out_Last, + Flush => Flush); + end if; + end Translate; + + -------------------- + -- Translate_Auto -- + -------------------- + + procedure Translate_Auto + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) + is + use type Thin.Int; + Code : Thin.Int; + + begin + if not Is_Open (Filter) then + raise Status_Error; + end if; + + if Out_Data'Length = 0 and then In_Data'Length = 0 then + raise Constraint_Error; + end if; + + Set_Out (Filter.Strm.all, Out_Data'Address, Out_Data'Length); + Set_In (Filter.Strm.all, In_Data'Address, In_Data'Length); + + Code := Flate (Filter.Compression).Step + (To_Thin_Access (Filter.Strm), + Thin.Int (Flush)); + + if Code = Thin.Z_STREAM_END then + Filter.Stream_End := True; + else + Check_Error (Filter.Strm.all, Code); + end if; + + In_Last := In_Data'Last + - Stream_Element_Offset (Avail_In (Filter.Strm.all)); + Out_Last := Out_Data'Last + - Stream_Element_Offset (Avail_Out (Filter.Strm.all)); + end Translate_Auto; + + -------------------- + -- Translate_GZip -- + -------------------- + + procedure Translate_GZip + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) + is + Out_First : Stream_Element_Offset; + + procedure Add_Data (Data : in Stream_Element_Array); + -- Add data to stream from the Filter.Offset till necessary, + -- used for add gzip headr/footer. + + procedure Put_32 + (Item : in out Stream_Element_Array; + Data : in Unsigned_32); + pragma Inline (Put_32); + + -------------- + -- Add_Data -- + -------------- + + procedure Add_Data (Data : in Stream_Element_Array) is + Data_First : Stream_Element_Offset renames Filter.Offset; + Data_Last : Stream_Element_Offset; + Data_Len : Stream_Element_Offset; -- -1 + Out_Len : Stream_Element_Offset; -- -1 + begin + Out_First := Out_Last + 1; + + if Data_First > Data'Last then + return; + end if; + + Data_Len := Data'Last - Data_First; + Out_Len := Out_Data'Last - Out_First; + + if Data_Len <= Out_Len then + Out_Last := Out_First + Data_Len; + Data_Last := Data'Last; + else + Out_Last := Out_Data'Last; + Data_Last := Data_First + Out_Len; + end if; + + Out_Data (Out_First .. Out_Last) := Data (Data_First .. Data_Last); + + Data_First := Data_Last + 1; + Out_First := Out_Last + 1; + end Add_Data; + + ------------ + -- Put_32 -- + ------------ + + procedure Put_32 + (Item : in out Stream_Element_Array; + Data : in Unsigned_32) + is + D : Unsigned_32 := Data; + begin + for J in Item'First .. Item'First + 3 loop + Item (J) := Stream_Element (D and 16#FF#); + D := Shift_Right (D, 8); + end loop; + end Put_32; + + begin + Out_Last := Out_Data'First - 1; + + if not Filter.Stream_End then + Add_Data (Simple_GZip_Header); + + Translate_Auto + (Filter => Filter, + In_Data => In_Data, + In_Last => In_Last, + Out_Data => Out_Data (Out_First .. Out_Data'Last), + Out_Last => Out_Last, + Flush => Flush); + + CRC32 (Filter.CRC, In_Data (In_Data'First .. In_Last)); + end if; + + if Filter.Stream_End and then Out_Last <= Out_Data'Last then + -- This detection method would work only when + -- Simple_GZip_Header'Last > Footer_Array'Last + + if Filter.Offset = Simple_GZip_Header'Last + 1 then + Filter.Offset := Footer_Array'First; + end if; + + declare + Footer : Footer_Array; + begin + Put_32 (Footer, Filter.CRC); + Put_32 (Footer (Footer'First + 4 .. Footer'Last), + Unsigned_32 (Total_In (Filter))); + Add_Data (Footer); + end; + end if; + end Translate_GZip; + + ------------- + -- Version -- + ------------- + + function Version return String is + begin + return Interfaces.C.Strings.Value (Thin.zlibVersion); + end Version; + + ----------- + -- Write -- + ----------- + + procedure Write + (Filter : in out Filter_Type; + Item : in Ada.Streams.Stream_Element_Array; + Flush : in Flush_Mode := No_Flush) + is + Buffer : Stream_Element_Array (1 .. Buffer_Size); + In_Last : Stream_Element_Offset; + Out_Last : Stream_Element_Offset; + In_First : Stream_Element_Offset := Item'First; + begin + if Item'Length = 0 and Flush = No_Flush then + return; + end if; + + loop + Translate + (Filter => Filter, + In_Data => Item (In_First .. Item'Last), + In_Last => In_Last, + Out_Data => Buffer, + Out_Last => Out_Last, + Flush => Flush); + + if Out_Last >= Buffer'First then + Write (Buffer (1 .. Out_Last)); + end if; + + exit when In_Last = Item'Last or Stream_End (Filter); + + In_First := In_Last + 1; + end loop; + end Write; + +end ZLib; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.ads b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.ads new file mode 100644 index 000000000..79ffc4095 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.ads @@ -0,0 +1,328 @@ +------------------------------------------------------------------------------ +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2004 Dmitriy Anisimkov -- +-- -- +-- This library is free software; you can redistribute it and/or modify -- +-- it under the terms of the GNU General Public License as published by -- +-- the Free Software Foundation; either version 2 of the License, or (at -- +-- your option) any later version. -- +-- -- +-- This library is distributed in the hope that it will be useful, but -- +-- WITHOUT ANY WARRANTY; without even the implied warranty of -- +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -- +-- General Public License for more details. -- +-- -- +-- You should have received a copy of the GNU General Public License -- +-- along with this library; if not, write to the Free Software Foundation, -- +-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -- +-- -- +-- As a special exception, if other files instantiate generics from this -- +-- unit, or you link this unit with other files to produce an executable, -- +-- this unit does not by itself cause the resulting executable to be -- +-- covered by the GNU General Public License. This exception does not -- +-- however invalidate any other reasons why the executable file might be -- +-- covered by the GNU Public License. -- +------------------------------------------------------------------------------ + +-- $Id: zlib.ads,v 1.26 2004/09/06 06:53:19 vagul Exp $ + +with Ada.Streams; + +with Interfaces; + +package ZLib is + + ZLib_Error : exception; + Status_Error : exception; + + type Compression_Level is new Integer range -1 .. 9; + + type Flush_Mode is private; + + type Compression_Method is private; + + type Window_Bits_Type is new Integer range 8 .. 15; + + type Memory_Level_Type is new Integer range 1 .. 9; + + type Unsigned_32 is new Interfaces.Unsigned_32; + + type Strategy_Type is private; + + type Header_Type is (None, Auto, Default, GZip); + -- Header type usage have a some limitation for inflate. + -- See comment for Inflate_Init. + + subtype Count is Ada.Streams.Stream_Element_Count; + + Default_Memory_Level : constant Memory_Level_Type := 8; + Default_Window_Bits : constant Window_Bits_Type := 15; + + ---------------------------------- + -- Compression method constants -- + ---------------------------------- + + Deflated : constant Compression_Method; + -- Only one method allowed in this ZLib version + + --------------------------------- + -- Compression level constants -- + --------------------------------- + + No_Compression : constant Compression_Level := 0; + Best_Speed : constant Compression_Level := 1; + Best_Compression : constant Compression_Level := 9; + Default_Compression : constant Compression_Level := -1; + + -------------------------- + -- Flush mode constants -- + -------------------------- + + No_Flush : constant Flush_Mode; + -- Regular way for compression, no flush + + Partial_Flush : constant Flush_Mode; + -- Will be removed, use Z_SYNC_FLUSH instead + + Sync_Flush : constant Flush_Mode; + -- All pending output is flushed to the output buffer and the output + -- is aligned on a byte boundary, so that the decompressor can get all + -- input data available so far. (In particular avail_in is zero after the + -- call if enough output space has been provided before the call.) + -- Flushing may degrade compression for some compression algorithms and so + -- it should be used only when necessary. + + Block_Flush : constant Flush_Mode; + -- Z_BLOCK requests that inflate() stop + -- if and when it get to the next deflate block boundary. When decoding the + -- zlib or gzip format, this will cause inflate() to return immediately + -- after the header and before the first block. When doing a raw inflate, + -- inflate() will go ahead and process the first block, and will return + -- when it gets to the end of that block, or when it runs out of data. + + Full_Flush : constant Flush_Mode; + -- All output is flushed as with SYNC_FLUSH, and the compression state + -- is reset so that decompression can restart from this point if previous + -- compressed data has been damaged or if random access is desired. Using + -- Full_Flush too often can seriously degrade the compression. + + Finish : constant Flush_Mode; + -- Just for tell the compressor that input data is complete. + + ------------------------------------ + -- Compression strategy constants -- + ------------------------------------ + + -- RLE stategy could be used only in version 1.2.0 and later. + + Filtered : constant Strategy_Type; + Huffman_Only : constant Strategy_Type; + RLE : constant Strategy_Type; + Default_Strategy : constant Strategy_Type; + + Default_Buffer_Size : constant := 4096; + + type Filter_Type is tagged limited private; + -- The filter is for compression and for decompression. + -- The usage of the type is depend of its initialization. + + function Version return String; + pragma Inline (Version); + -- Return string representation of the ZLib version. + + procedure Deflate_Init + (Filter : in out Filter_Type; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Method : in Compression_Method := Deflated; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Memory_Level : in Memory_Level_Type := Default_Memory_Level; + Header : in Header_Type := Default); + -- Compressor initialization. + -- When Header parameter is Auto or Default, then default zlib header + -- would be provided for compressed data. + -- When Header is GZip, then gzip header would be set instead of + -- default header. + -- When Header is None, no header would be set for compressed data. + + procedure Inflate_Init + (Filter : in out Filter_Type; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Header : in Header_Type := Default); + -- Decompressor initialization. + -- Default header type mean that ZLib default header is expecting in the + -- input compressed stream. + -- Header type None mean that no header is expecting in the input stream. + -- GZip header type mean that GZip header is expecting in the + -- input compressed stream. + -- Auto header type mean that header type (GZip or Native) would be + -- detected automatically in the input stream. + -- Note that header types parameter values None, GZip and Auto are + -- supported for inflate routine only in ZLib versions 1.2.0.2 and later. + -- Deflate_Init is supporting all header types. + + function Is_Open (Filter : in Filter_Type) return Boolean; + pragma Inline (Is_Open); + -- Is the filter opened for compression or decompression. + + procedure Close + (Filter : in out Filter_Type; + Ignore_Error : in Boolean := False); + -- Closing the compression or decompressor. + -- If stream is closing before the complete and Ignore_Error is False, + -- The exception would be raised. + + generic + with procedure Data_In + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + with procedure Data_Out + (Item : in Ada.Streams.Stream_Element_Array); + procedure Generic_Translate + (Filter : in out Filter_Type; + In_Buffer_Size : in Integer := Default_Buffer_Size; + Out_Buffer_Size : in Integer := Default_Buffer_Size); + -- Compress/decompress data fetch from Data_In routine and pass the result + -- to the Data_Out routine. User should provide Data_In and Data_Out + -- for compression/decompression data flow. + -- Compression or decompression depend on Filter initialization. + + function Total_In (Filter : in Filter_Type) return Count; + pragma Inline (Total_In); + -- Returns total number of input bytes read so far + + function Total_Out (Filter : in Filter_Type) return Count; + pragma Inline (Total_Out); + -- Returns total number of bytes output so far + + function CRC32 + (CRC : in Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array) + return Unsigned_32; + pragma Inline (CRC32); + -- Compute CRC32, it could be necessary for make gzip format + + procedure CRC32 + (CRC : in out Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array); + pragma Inline (CRC32); + -- Compute CRC32, it could be necessary for make gzip format + + ------------------------------------------------- + -- Below is more complex low level routines. -- + ------------------------------------------------- + + procedure Translate + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + -- Compress/decompress the In_Data buffer and place the result into + -- Out_Data. In_Last is the index of last element from In_Data accepted by + -- the Filter. Out_Last is the last element of the received data from + -- Filter. To tell the filter that incoming data are complete put the + -- Flush parameter to Finish. + + function Stream_End (Filter : in Filter_Type) return Boolean; + pragma Inline (Stream_End); + -- Return the true when the stream is complete. + + procedure Flush + (Filter : in out Filter_Type; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + pragma Inline (Flush); + -- Flushing the data from the compressor. + + generic + with procedure Write + (Item : in Ada.Streams.Stream_Element_Array); + -- User should provide this routine for accept + -- compressed/decompressed data. + + Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size; + -- Buffer size for Write user routine. + + procedure Write + (Filter : in out Filter_Type; + Item : in Ada.Streams.Stream_Element_Array; + Flush : in Flush_Mode := No_Flush); + -- Compress/Decompress data from Item to the generic parameter procedure + -- Write. Output buffer size could be set in Buffer_Size generic parameter. + + generic + with procedure Read + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + -- User should provide data for compression/decompression + -- thru this routine. + + Buffer : in out Ada.Streams.Stream_Element_Array; + -- Buffer for keep remaining data from the previous + -- back read. + + Rest_First, Rest_Last : in out Ada.Streams.Stream_Element_Offset; + -- Rest_First have to be initialized to Buffer'Last + 1 + -- Rest_Last have to be initialized to Buffer'Last + -- before usage. + + Allow_Read_Some : in Boolean := False; + -- Is it allowed to return Last < Item'Last before end of data. + + procedure Read + (Filter : in out Filter_Type; + Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode := No_Flush); + -- Compress/Decompress data from generic parameter procedure Read to the + -- Item. User should provide Buffer and initialized Rest_First, Rest_Last + -- indicators. If Allow_Read_Some is True, Read routines could return + -- Last < Item'Last only at end of stream. + +private + + use Ada.Streams; + + pragma Assert (Ada.Streams.Stream_Element'Size = 8); + pragma Assert (Ada.Streams.Stream_Element'Modulus = 2**8); + + type Flush_Mode is new Integer range 0 .. 5; + + type Compression_Method is new Integer range 8 .. 8; + + type Strategy_Type is new Integer range 0 .. 3; + + No_Flush : constant Flush_Mode := 0; + Partial_Flush : constant Flush_Mode := 1; + Sync_Flush : constant Flush_Mode := 2; + Full_Flush : constant Flush_Mode := 3; + Finish : constant Flush_Mode := 4; + Block_Flush : constant Flush_Mode := 5; + + Filtered : constant Strategy_Type := 1; + Huffman_Only : constant Strategy_Type := 2; + RLE : constant Strategy_Type := 3; + Default_Strategy : constant Strategy_Type := 0; + + Deflated : constant Compression_Method := 8; + + type Z_Stream; + + type Z_Stream_Access is access all Z_Stream; + + type Filter_Type is tagged limited record + Strm : Z_Stream_Access; + Compression : Boolean; + Stream_End : Boolean; + Header : Header_Type; + CRC : Unsigned_32; + Offset : Stream_Element_Offset; + -- Offset for gzip header/footer output. + end record; + +end ZLib; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.gpr b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.gpr new file mode 100644 index 000000000..296b22aa9 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/ada/zlib.gpr @@ -0,0 +1,20 @@ +project Zlib is + + for Languages use ("Ada"); + for Source_Dirs use ("."); + for Object_Dir use "."; + for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo"); + + package Compiler is + for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst"); + end Compiler; + + package Linker is + for Default_Switches ("ada") use ("-lz"); + end Linker; + + package Builder is + for Default_Switches ("ada") use ("-s", "-gnatQ"); + end Builder; + +end Zlib; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/amd64/amd64-match.S b/src/SDL2/external/zlib-1.2.8/contrib/amd64/amd64-match.S new file mode 100644 index 000000000..81d4a1c94 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/amd64/amd64-match.S @@ -0,0 +1,452 @@ +/* + * match.S -- optimized version of longest_match() + * based on the similar work by Gilles Vollant, and Brian Raiter, written 1998 + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the BSD License. Use by owners of Che Guevarra + * parafernalia is prohibited, where possible, and highly discouraged + * elsewhere. + */ + +#ifndef NO_UNDERLINE +# define match_init _match_init +# define longest_match _longest_match +#endif + +#define scanend ebx +#define scanendw bx +#define chainlenwmask edx /* high word: current chain len low word: s->wmask */ +#define curmatch rsi +#define curmatchd esi +#define windowbestlen r8 +#define scanalign r9 +#define scanalignd r9d +#define window r10 +#define bestlen r11 +#define bestlend r11d +#define scanstart r12d +#define scanstartw r12w +#define scan r13 +#define nicematch r14d +#define limit r15 +#define limitd r15d +#define prev rcx + +/* + * The 258 is a "magic number, not a parameter -- changing it + * breaks the hell loose + */ +#define MAX_MATCH (258) +#define MIN_MATCH (3) +#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1) +#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7) + +/* stack frame offsets */ +#define LocalVarsSize (112) +#define _chainlenwmask ( 8-LocalVarsSize)(%rsp) +#define _windowbestlen (16-LocalVarsSize)(%rsp) +#define save_r14 (24-LocalVarsSize)(%rsp) +#define save_rsi (32-LocalVarsSize)(%rsp) +#define save_rbx (40-LocalVarsSize)(%rsp) +#define save_r12 (56-LocalVarsSize)(%rsp) +#define save_r13 (64-LocalVarsSize)(%rsp) +#define save_r15 (80-LocalVarsSize)(%rsp) + + +.globl match_init, longest_match + +/* + * On AMD64 the first argument of a function (in our case -- the pointer to + * deflate_state structure) is passed in %rdi, hence our offsets below are + * all off of that. + */ + +/* you can check the structure offset by running + +#include +#include +#include "deflate.h" + +void print_depl() +{ +deflate_state ds; +deflate_state *s=&ds; +printf("size pointer=%u\n",(int)sizeof(void*)); + +printf("#define dsWSize (%3u)(%%rdi)\n",(int)(((char*)&(s->w_size))-((char*)s))); +printf("#define dsWMask (%3u)(%%rdi)\n",(int)(((char*)&(s->w_mask))-((char*)s))); +printf("#define dsWindow (%3u)(%%rdi)\n",(int)(((char*)&(s->window))-((char*)s))); +printf("#define dsPrev (%3u)(%%rdi)\n",(int)(((char*)&(s->prev))-((char*)s))); +printf("#define dsMatchLen (%3u)(%%rdi)\n",(int)(((char*)&(s->match_length))-((char*)s))); +printf("#define dsPrevMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_match))-((char*)s))); +printf("#define dsStrStart (%3u)(%%rdi)\n",(int)(((char*)&(s->strstart))-((char*)s))); +printf("#define dsMatchStart (%3u)(%%rdi)\n",(int)(((char*)&(s->match_start))-((char*)s))); +printf("#define dsLookahead (%3u)(%%rdi)\n",(int)(((char*)&(s->lookahead))-((char*)s))); +printf("#define dsPrevLen (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_length))-((char*)s))); +printf("#define dsMaxChainLen (%3u)(%%rdi)\n",(int)(((char*)&(s->max_chain_length))-((char*)s))); +printf("#define dsGoodMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->good_match))-((char*)s))); +printf("#define dsNiceMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->nice_match))-((char*)s))); +} + +*/ + + +/* + to compile for XCode 3.2 on MacOSX x86_64 + - run "gcc -g -c -DXCODE_MAC_X64_STRUCTURE amd64-match.S" + */ + + +#ifndef CURRENT_LINX_XCODE_MAC_X64_STRUCTURE +#define dsWSize ( 68)(%rdi) +#define dsWMask ( 76)(%rdi) +#define dsWindow ( 80)(%rdi) +#define dsPrev ( 96)(%rdi) +#define dsMatchLen (144)(%rdi) +#define dsPrevMatch (148)(%rdi) +#define dsStrStart (156)(%rdi) +#define dsMatchStart (160)(%rdi) +#define dsLookahead (164)(%rdi) +#define dsPrevLen (168)(%rdi) +#define dsMaxChainLen (172)(%rdi) +#define dsGoodMatch (188)(%rdi) +#define dsNiceMatch (192)(%rdi) + +#else + +#ifndef STRUCT_OFFSET +# define STRUCT_OFFSET (0) +#endif + + +#define dsWSize ( 56 + STRUCT_OFFSET)(%rdi) +#define dsWMask ( 64 + STRUCT_OFFSET)(%rdi) +#define dsWindow ( 72 + STRUCT_OFFSET)(%rdi) +#define dsPrev ( 88 + STRUCT_OFFSET)(%rdi) +#define dsMatchLen (136 + STRUCT_OFFSET)(%rdi) +#define dsPrevMatch (140 + STRUCT_OFFSET)(%rdi) +#define dsStrStart (148 + STRUCT_OFFSET)(%rdi) +#define dsMatchStart (152 + STRUCT_OFFSET)(%rdi) +#define dsLookahead (156 + STRUCT_OFFSET)(%rdi) +#define dsPrevLen (160 + STRUCT_OFFSET)(%rdi) +#define dsMaxChainLen (164 + STRUCT_OFFSET)(%rdi) +#define dsGoodMatch (180 + STRUCT_OFFSET)(%rdi) +#define dsNiceMatch (184 + STRUCT_OFFSET)(%rdi) + +#endif + + + + +.text + +/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */ + +longest_match: +/* + * Retrieve the function arguments. %curmatch will hold cur_match + * throughout the entire function (passed via rsi on amd64). + * rdi will hold the pointer to the deflate_state (first arg on amd64) + */ + mov %rsi, save_rsi + mov %rbx, save_rbx + mov %r12, save_r12 + mov %r13, save_r13 + mov %r14, save_r14 + mov %r15, save_r15 + +/* uInt wmask = s->w_mask; */ +/* unsigned chain_length = s->max_chain_length; */ +/* if (s->prev_length >= s->good_match) { */ +/* chain_length >>= 2; */ +/* } */ + + movl dsPrevLen, %eax + movl dsGoodMatch, %ebx + cmpl %ebx, %eax + movl dsWMask, %eax + movl dsMaxChainLen, %chainlenwmask + jl LastMatchGood + shrl $2, %chainlenwmask +LastMatchGood: + +/* chainlen is decremented once beforehand so that the function can */ +/* use the sign flag instead of the zero flag for the exit test. */ +/* It is then shifted into the high word, to make room for the wmask */ +/* value, which it will always accompany. */ + + decl %chainlenwmask + shll $16, %chainlenwmask + orl %eax, %chainlenwmask + +/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */ + + movl dsNiceMatch, %eax + movl dsLookahead, %ebx + cmpl %eax, %ebx + jl LookaheadLess + movl %eax, %ebx +LookaheadLess: movl %ebx, %nicematch + +/* register Bytef *scan = s->window + s->strstart; */ + + mov dsWindow, %window + movl dsStrStart, %limitd + lea (%limit, %window), %scan + +/* Determine how many bytes the scan ptr is off from being */ +/* dword-aligned. */ + + mov %scan, %scanalign + negl %scanalignd + andl $3, %scanalignd + +/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */ +/* s->strstart - (IPos)MAX_DIST(s) : NIL; */ + + movl dsWSize, %eax + subl $MIN_LOOKAHEAD, %eax + xorl %ecx, %ecx + subl %eax, %limitd + cmovng %ecx, %limitd + +/* int best_len = s->prev_length; */ + + movl dsPrevLen, %bestlend + +/* Store the sum of s->window + best_len in %windowbestlen locally, and in memory. */ + + lea (%window, %bestlen), %windowbestlen + mov %windowbestlen, _windowbestlen + +/* register ush scan_start = *(ushf*)scan; */ +/* register ush scan_end = *(ushf*)(scan+best_len-1); */ +/* Posf *prev = s->prev; */ + + movzwl (%scan), %scanstart + movzwl -1(%scan, %bestlen), %scanend + mov dsPrev, %prev + +/* Jump into the main loop. */ + + movl %chainlenwmask, _chainlenwmask + jmp LoopEntry + +.balign 16 + +/* do { + * match = s->window + cur_match; + * if (*(ushf*)(match+best_len-1) != scan_end || + * *(ushf*)match != scan_start) continue; + * [...] + * } while ((cur_match = prev[cur_match & wmask]) > limit + * && --chain_length != 0); + * + * Here is the inner loop of the function. The function will spend the + * majority of its time in this loop, and majority of that time will + * be spent in the first ten instructions. + */ +LookupLoop: + andl %chainlenwmask, %curmatchd + movzwl (%prev, %curmatch, 2), %curmatchd + cmpl %limitd, %curmatchd + jbe LeaveNow + subl $0x00010000, %chainlenwmask + js LeaveNow +LoopEntry: cmpw -1(%windowbestlen, %curmatch), %scanendw + jne LookupLoop + cmpw %scanstartw, (%window, %curmatch) + jne LookupLoop + +/* Store the current value of chainlen. */ + movl %chainlenwmask, _chainlenwmask + +/* %scan is the string under scrutiny, and %prev to the string we */ +/* are hoping to match it up with. In actuality, %esi and %edi are */ +/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */ +/* initialized to -(MAX_MATCH_8 - scanalign). */ + + mov $(-MAX_MATCH_8), %rdx + lea (%curmatch, %window), %windowbestlen + lea MAX_MATCH_8(%windowbestlen, %scanalign), %windowbestlen + lea MAX_MATCH_8(%scan, %scanalign), %prev + +/* the prefetching below makes very little difference... */ + prefetcht1 (%windowbestlen, %rdx) + prefetcht1 (%prev, %rdx) + +/* + * Test the strings for equality, 8 bytes at a time. At the end, + * adjust %rdx so that it is offset to the exact byte that mismatched. + * + * It should be confessed that this loop usually does not represent + * much of the total running time. Replacing it with a more + * straightforward "rep cmpsb" would not drastically degrade + * performance -- unrolling it, for example, makes no difference. + */ + +#undef USE_SSE /* works, but is 6-7% slower, than non-SSE... */ + +LoopCmps: +#ifdef USE_SSE + /* Preload the SSE registers */ + movdqu (%windowbestlen, %rdx), %xmm1 + movdqu (%prev, %rdx), %xmm2 + pcmpeqb %xmm2, %xmm1 + movdqu 16(%windowbestlen, %rdx), %xmm3 + movdqu 16(%prev, %rdx), %xmm4 + pcmpeqb %xmm4, %xmm3 + movdqu 32(%windowbestlen, %rdx), %xmm5 + movdqu 32(%prev, %rdx), %xmm6 + pcmpeqb %xmm6, %xmm5 + movdqu 48(%windowbestlen, %rdx), %xmm7 + movdqu 48(%prev, %rdx), %xmm8 + pcmpeqb %xmm8, %xmm7 + + /* Check the comparisions' results */ + pmovmskb %xmm1, %rax + notw %ax + bsfw %ax, %ax + jnz LeaveLoopCmps + + /* this is the only iteration of the loop with a possibility of having + incremented rdx by 0x108 (each loop iteration add 16*4 = 0x40 + and (0x40*4)+8=0x108 */ + add $8, %rdx + jz LenMaximum + add $8, %rdx + + + pmovmskb %xmm3, %rax + notw %ax + bsfw %ax, %ax + jnz LeaveLoopCmps + + + add $16, %rdx + + + pmovmskb %xmm5, %rax + notw %ax + bsfw %ax, %ax + jnz LeaveLoopCmps + + add $16, %rdx + + + pmovmskb %xmm7, %rax + notw %ax + bsfw %ax, %ax + jnz LeaveLoopCmps + + add $16, %rdx + + jmp LoopCmps +LeaveLoopCmps: add %rax, %rdx +#else + mov (%windowbestlen, %rdx), %rax + xor (%prev, %rdx), %rax + jnz LeaveLoopCmps + + mov 8(%windowbestlen, %rdx), %rax + xor 8(%prev, %rdx), %rax + jnz LeaveLoopCmps8 + + mov 16(%windowbestlen, %rdx), %rax + xor 16(%prev, %rdx), %rax + jnz LeaveLoopCmps16 + + add $24, %rdx + jnz LoopCmps + jmp LenMaximum +# if 0 +/* + * This three-liner is tantalizingly simple, but bsf is a slow instruction, + * and the complicated alternative down below is quite a bit faster. Sad... + */ + +LeaveLoopCmps: bsf %rax, %rax /* find the first non-zero bit */ + shrl $3, %eax /* divide by 8 to get the byte */ + add %rax, %rdx +# else +LeaveLoopCmps16: + add $8, %rdx +LeaveLoopCmps8: + add $8, %rdx +LeaveLoopCmps: testl $0xFFFFFFFF, %eax /* Check the first 4 bytes */ + jnz Check16 + add $4, %rdx + shr $32, %rax +Check16: testw $0xFFFF, %ax + jnz LenLower + add $2, %rdx + shrl $16, %eax +LenLower: subb $1, %al + adc $0, %rdx +# endif +#endif + +/* Calculate the length of the match. If it is longer than MAX_MATCH, */ +/* then automatically accept it as the best possible match and leave. */ + + lea (%prev, %rdx), %rax + sub %scan, %rax + cmpl $MAX_MATCH, %eax + jge LenMaximum + +/* If the length of the match is not longer than the best match we */ +/* have so far, then forget it and return to the lookup loop. */ + + cmpl %bestlend, %eax + jg LongerMatch + mov _windowbestlen, %windowbestlen + mov dsPrev, %prev + movl _chainlenwmask, %edx + jmp LookupLoop + +/* s->match_start = cur_match; */ +/* best_len = len; */ +/* if (len >= nice_match) break; */ +/* scan_end = *(ushf*)(scan+best_len-1); */ + +LongerMatch: + movl %eax, %bestlend + movl %curmatchd, dsMatchStart + cmpl %nicematch, %eax + jge LeaveNow + + lea (%window, %bestlen), %windowbestlen + mov %windowbestlen, _windowbestlen + + movzwl -1(%scan, %rax), %scanend + mov dsPrev, %prev + movl _chainlenwmask, %chainlenwmask + jmp LookupLoop + +/* Accept the current string, with the maximum possible length. */ + +LenMaximum: + movl $MAX_MATCH, %bestlend + movl %curmatchd, dsMatchStart + +/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */ +/* return s->lookahead; */ + +LeaveNow: + movl dsLookahead, %eax + cmpl %eax, %bestlend + cmovngl %bestlend, %eax +LookaheadRet: + +/* Restore the registers and return from whence we came. */ + + mov save_rsi, %rsi + mov save_rbx, %rbx + mov save_r12, %r12 + mov save_r13, %r13 + mov save_r14, %r14 + mov save_r15, %r15 + + ret + +match_init: ret diff --git a/src/SDL2/external/zlib-1.2.8/contrib/asm686/README.686 b/src/SDL2/external/zlib-1.2.8/contrib/asm686/README.686 new file mode 100644 index 000000000..a0bf3bea4 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/asm686/README.686 @@ -0,0 +1,51 @@ +This is a patched version of zlib, modified to use +Pentium-Pro-optimized assembly code in the deflation algorithm. The +files changed/added by this patch are: + +README.686 +match.S + +The speedup that this patch provides varies, depending on whether the +compiler used to build the original version of zlib falls afoul of the +PPro's speed traps. My own tests show a speedup of around 10-20% at +the default compression level, and 20-30% using -9, against a version +compiled using gcc 2.7.2.3. Your mileage may vary. + +Note that this code has been tailored for the PPro/PII in particular, +and will not perform particuarly well on a Pentium. + +If you are using an assembler other than GNU as, you will have to +translate match.S to use your assembler's syntax. (Have fun.) + +Brian Raiter +breadbox@muppetlabs.com +April, 1998 + + +Added for zlib 1.1.3: + +The patches come from +http://www.muppetlabs.com/~breadbox/software/assembly.html + +To compile zlib with this asm file, copy match.S to the zlib directory +then do: + +CFLAGS="-O3 -DASMV" ./configure +make OBJA=match.o + + +Update: + +I've been ignoring these assembly routines for years, believing that +gcc's generated code had caught up with it sometime around gcc 2.95 +and the major rearchitecting of the Pentium 4. However, I recently +learned that, despite what I believed, this code still has some life +in it. On the Pentium 4 and AMD64 chips, it continues to run about 8% +faster than the code produced by gcc 4.1. + +In acknowledgement of its continuing usefulness, I've altered the +license to match that of the rest of zlib. Share and Enjoy! + +Brian Raiter +breadbox@muppetlabs.com +April, 2007 diff --git a/src/SDL2/external/zlib-1.2.8/contrib/asm686/match.S b/src/SDL2/external/zlib-1.2.8/contrib/asm686/match.S new file mode 100644 index 000000000..fa4210927 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/asm686/match.S @@ -0,0 +1,357 @@ +/* match.S -- x86 assembly version of the zlib longest_match() function. + * Optimized for the Intel 686 chips (PPro and later). + * + * Copyright (C) 1998, 2007 Brian Raiter + * + * This software is provided 'as-is', without any express or implied + * warranty. In no event will the author be held liable for any damages + * arising from the use of this software. + * + * Permission is granted to anyone to use this software for any purpose, + * including commercial applications, and to alter it and redistribute it + * freely, subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you must not + * claim that you wrote the original software. If you use this software + * in a product, an acknowledgment in the product documentation would be + * appreciated but is not required. + * 2. Altered source versions must be plainly marked as such, and must not be + * misrepresented as being the original software. + * 3. This notice may not be removed or altered from any source distribution. + */ + +#ifndef NO_UNDERLINE +#define match_init _match_init +#define longest_match _longest_match +#endif + +#define MAX_MATCH (258) +#define MIN_MATCH (3) +#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1) +#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7) + +/* stack frame offsets */ + +#define chainlenwmask 0 /* high word: current chain len */ + /* low word: s->wmask */ +#define window 4 /* local copy of s->window */ +#define windowbestlen 8 /* s->window + bestlen */ +#define scanstart 16 /* first two bytes of string */ +#define scanend 12 /* last two bytes of string */ +#define scanalign 20 /* dword-misalignment of string */ +#define nicematch 24 /* a good enough match size */ +#define bestlen 28 /* size of best match so far */ +#define scan 32 /* ptr to string wanting match */ + +#define LocalVarsSize (36) +/* saved ebx 36 */ +/* saved edi 40 */ +/* saved esi 44 */ +/* saved ebp 48 */ +/* return address 52 */ +#define deflatestate 56 /* the function arguments */ +#define curmatch 60 + +/* All the +zlib1222add offsets are due to the addition of fields + * in zlib in the deflate_state structure since the asm code was first written + * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). + * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). + * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). + */ + +#define zlib1222add (8) + +#define dsWSize (36+zlib1222add) +#define dsWMask (44+zlib1222add) +#define dsWindow (48+zlib1222add) +#define dsPrev (56+zlib1222add) +#define dsMatchLen (88+zlib1222add) +#define dsPrevMatch (92+zlib1222add) +#define dsStrStart (100+zlib1222add) +#define dsMatchStart (104+zlib1222add) +#define dsLookahead (108+zlib1222add) +#define dsPrevLen (112+zlib1222add) +#define dsMaxChainLen (116+zlib1222add) +#define dsGoodMatch (132+zlib1222add) +#define dsNiceMatch (136+zlib1222add) + + +.file "match.S" + +.globl match_init, longest_match + +.text + +/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */ +.cfi_sections .debug_frame + +longest_match: + +.cfi_startproc +/* Save registers that the compiler may be using, and adjust %esp to */ +/* make room for our stack frame. */ + + pushl %ebp + .cfi_def_cfa_offset 8 + .cfi_offset ebp, -8 + pushl %edi + .cfi_def_cfa_offset 12 + pushl %esi + .cfi_def_cfa_offset 16 + pushl %ebx + .cfi_def_cfa_offset 20 + subl $LocalVarsSize, %esp + .cfi_def_cfa_offset LocalVarsSize+20 + +/* Retrieve the function arguments. %ecx will hold cur_match */ +/* throughout the entire function. %edx will hold the pointer to the */ +/* deflate_state structure during the function's setup (before */ +/* entering the main loop). */ + + movl deflatestate(%esp), %edx + movl curmatch(%esp), %ecx + +/* uInt wmask = s->w_mask; */ +/* unsigned chain_length = s->max_chain_length; */ +/* if (s->prev_length >= s->good_match) { */ +/* chain_length >>= 2; */ +/* } */ + + movl dsPrevLen(%edx), %eax + movl dsGoodMatch(%edx), %ebx + cmpl %ebx, %eax + movl dsWMask(%edx), %eax + movl dsMaxChainLen(%edx), %ebx + jl LastMatchGood + shrl $2, %ebx +LastMatchGood: + +/* chainlen is decremented once beforehand so that the function can */ +/* use the sign flag instead of the zero flag for the exit test. */ +/* It is then shifted into the high word, to make room for the wmask */ +/* value, which it will always accompany. */ + + decl %ebx + shll $16, %ebx + orl %eax, %ebx + movl %ebx, chainlenwmask(%esp) + +/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */ + + movl dsNiceMatch(%edx), %eax + movl dsLookahead(%edx), %ebx + cmpl %eax, %ebx + jl LookaheadLess + movl %eax, %ebx +LookaheadLess: movl %ebx, nicematch(%esp) + +/* register Bytef *scan = s->window + s->strstart; */ + + movl dsWindow(%edx), %esi + movl %esi, window(%esp) + movl dsStrStart(%edx), %ebp + lea (%esi,%ebp), %edi + movl %edi, scan(%esp) + +/* Determine how many bytes the scan ptr is off from being */ +/* dword-aligned. */ + + movl %edi, %eax + negl %eax + andl $3, %eax + movl %eax, scanalign(%esp) + +/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */ +/* s->strstart - (IPos)MAX_DIST(s) : NIL; */ + + movl dsWSize(%edx), %eax + subl $MIN_LOOKAHEAD, %eax + subl %eax, %ebp + jg LimitPositive + xorl %ebp, %ebp +LimitPositive: + +/* int best_len = s->prev_length; */ + + movl dsPrevLen(%edx), %eax + movl %eax, bestlen(%esp) + +/* Store the sum of s->window + best_len in %esi locally, and in %esi. */ + + addl %eax, %esi + movl %esi, windowbestlen(%esp) + +/* register ush scan_start = *(ushf*)scan; */ +/* register ush scan_end = *(ushf*)(scan+best_len-1); */ +/* Posf *prev = s->prev; */ + + movzwl (%edi), %ebx + movl %ebx, scanstart(%esp) + movzwl -1(%edi,%eax), %ebx + movl %ebx, scanend(%esp) + movl dsPrev(%edx), %edi + +/* Jump into the main loop. */ + + movl chainlenwmask(%esp), %edx + jmp LoopEntry + +.balign 16 + +/* do { + * match = s->window + cur_match; + * if (*(ushf*)(match+best_len-1) != scan_end || + * *(ushf*)match != scan_start) continue; + * [...] + * } while ((cur_match = prev[cur_match & wmask]) > limit + * && --chain_length != 0); + * + * Here is the inner loop of the function. The function will spend the + * majority of its time in this loop, and majority of that time will + * be spent in the first ten instructions. + * + * Within this loop: + * %ebx = scanend + * %ecx = curmatch + * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) + * %esi = windowbestlen - i.e., (window + bestlen) + * %edi = prev + * %ebp = limit + */ +LookupLoop: + andl %edx, %ecx + movzwl (%edi,%ecx,2), %ecx + cmpl %ebp, %ecx + jbe LeaveNow + subl $0x00010000, %edx + js LeaveNow +LoopEntry: movzwl -1(%esi,%ecx), %eax + cmpl %ebx, %eax + jnz LookupLoop + movl window(%esp), %eax + movzwl (%eax,%ecx), %eax + cmpl scanstart(%esp), %eax + jnz LookupLoop + +/* Store the current value of chainlen. */ + + movl %edx, chainlenwmask(%esp) + +/* Point %edi to the string under scrutiny, and %esi to the string we */ +/* are hoping to match it up with. In actuality, %esi and %edi are */ +/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */ +/* initialized to -(MAX_MATCH_8 - scanalign). */ + + movl window(%esp), %esi + movl scan(%esp), %edi + addl %ecx, %esi + movl scanalign(%esp), %eax + movl $(-MAX_MATCH_8), %edx + lea MAX_MATCH_8(%edi,%eax), %edi + lea MAX_MATCH_8(%esi,%eax), %esi + +/* Test the strings for equality, 8 bytes at a time. At the end, + * adjust %edx so that it is offset to the exact byte that mismatched. + * + * We already know at this point that the first three bytes of the + * strings match each other, and they can be safely passed over before + * starting the compare loop. So what this code does is skip over 0-3 + * bytes, as much as necessary in order to dword-align the %edi + * pointer. (%esi will still be misaligned three times out of four.) + * + * It should be confessed that this loop usually does not represent + * much of the total running time. Replacing it with a more + * straightforward "rep cmpsb" would not drastically degrade + * performance. + */ +LoopCmps: + movl (%esi,%edx), %eax + xorl (%edi,%edx), %eax + jnz LeaveLoopCmps + movl 4(%esi,%edx), %eax + xorl 4(%edi,%edx), %eax + jnz LeaveLoopCmps4 + addl $8, %edx + jnz LoopCmps + jmp LenMaximum +LeaveLoopCmps4: addl $4, %edx +LeaveLoopCmps: testl $0x0000FFFF, %eax + jnz LenLower + addl $2, %edx + shrl $16, %eax +LenLower: subb $1, %al + adcl $0, %edx + +/* Calculate the length of the match. If it is longer than MAX_MATCH, */ +/* then automatically accept it as the best possible match and leave. */ + + lea (%edi,%edx), %eax + movl scan(%esp), %edi + subl %edi, %eax + cmpl $MAX_MATCH, %eax + jge LenMaximum + +/* If the length of the match is not longer than the best match we */ +/* have so far, then forget it and return to the lookup loop. */ + + movl deflatestate(%esp), %edx + movl bestlen(%esp), %ebx + cmpl %ebx, %eax + jg LongerMatch + movl windowbestlen(%esp), %esi + movl dsPrev(%edx), %edi + movl scanend(%esp), %ebx + movl chainlenwmask(%esp), %edx + jmp LookupLoop + +/* s->match_start = cur_match; */ +/* best_len = len; */ +/* if (len >= nice_match) break; */ +/* scan_end = *(ushf*)(scan+best_len-1); */ + +LongerMatch: movl nicematch(%esp), %ebx + movl %eax, bestlen(%esp) + movl %ecx, dsMatchStart(%edx) + cmpl %ebx, %eax + jge LeaveNow + movl window(%esp), %esi + addl %eax, %esi + movl %esi, windowbestlen(%esp) + movzwl -1(%edi,%eax), %ebx + movl dsPrev(%edx), %edi + movl %ebx, scanend(%esp) + movl chainlenwmask(%esp), %edx + jmp LookupLoop + +/* Accept the current string, with the maximum possible length. */ + +LenMaximum: movl deflatestate(%esp), %edx + movl $MAX_MATCH, bestlen(%esp) + movl %ecx, dsMatchStart(%edx) + +/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */ +/* return s->lookahead; */ + +LeaveNow: + movl deflatestate(%esp), %edx + movl bestlen(%esp), %ebx + movl dsLookahead(%edx), %eax + cmpl %eax, %ebx + jg LookaheadRet + movl %ebx, %eax +LookaheadRet: + +/* Restore the stack and return from whence we came. */ + + addl $LocalVarsSize, %esp + .cfi_def_cfa_offset 20 + popl %ebx + .cfi_def_cfa_offset 16 + popl %esi + .cfi_def_cfa_offset 12 + popl %edi + .cfi_def_cfa_offset 8 + popl %ebp + .cfi_def_cfa_offset 4 +.cfi_endproc +match_init: ret diff --git a/src/SDL2/external/zlib-1.2.8/contrib/blast/README b/src/SDL2/external/zlib-1.2.8/contrib/blast/README new file mode 100644 index 000000000..e3a60b3f5 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/blast/README @@ -0,0 +1,4 @@ +Read blast.h for purpose and usage. + +Mark Adler +madler@alumni.caltech.edu diff --git a/src/SDL2/external/zlib-1.2.8/contrib/blast/blast.c b/src/SDL2/external/zlib-1.2.8/contrib/blast/blast.c new file mode 100644 index 000000000..69ef0fe00 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/blast/blast.c @@ -0,0 +1,446 @@ +/* blast.c + * Copyright (C) 2003, 2012 Mark Adler + * For conditions of distribution and use, see copyright notice in blast.h + * version 1.2, 24 Oct 2012 + * + * blast.c decompresses data compressed by the PKWare Compression Library. + * This function provides functionality similar to the explode() function of + * the PKWare library, hence the name "blast". + * + * This decompressor is based on the excellent format description provided by + * Ben Rudiak-Gould in comp.compression on August 13, 2001. Interestingly, the + * example Ben provided in the post is incorrect. The distance 110001 should + * instead be 111000. When corrected, the example byte stream becomes: + * + * 00 04 82 24 25 8f 80 7f + * + * which decompresses to "AIAIAIAIAIAIA" (without the quotes). + */ + +/* + * Change history: + * + * 1.0 12 Feb 2003 - First version + * 1.1 16 Feb 2003 - Fixed distance check for > 4 GB uncompressed data + * 1.2 24 Oct 2012 - Add note about using binary mode in stdio + * - Fix comparisons of differently signed integers + */ + +#include /* for setjmp(), longjmp(), and jmp_buf */ +#include "blast.h" /* prototype for blast() */ + +#define local static /* for local function definitions */ +#define MAXBITS 13 /* maximum code length */ +#define MAXWIN 4096 /* maximum window size */ + +/* input and output state */ +struct state { + /* input state */ + blast_in infun; /* input function provided by user */ + void *inhow; /* opaque information passed to infun() */ + unsigned char *in; /* next input location */ + unsigned left; /* available input at in */ + int bitbuf; /* bit buffer */ + int bitcnt; /* number of bits in bit buffer */ + + /* input limit error return state for bits() and decode() */ + jmp_buf env; + + /* output state */ + blast_out outfun; /* output function provided by user */ + void *outhow; /* opaque information passed to outfun() */ + unsigned next; /* index of next write location in out[] */ + int first; /* true to check distances (for first 4K) */ + unsigned char out[MAXWIN]; /* output buffer and sliding window */ +}; + +/* + * Return need bits from the input stream. This always leaves less than + * eight bits in the buffer. bits() works properly for need == 0. + * + * Format notes: + * + * - Bits are stored in bytes from the least significant bit to the most + * significant bit. Therefore bits are dropped from the bottom of the bit + * buffer, using shift right, and new bytes are appended to the top of the + * bit buffer, using shift left. + */ +local int bits(struct state *s, int need) +{ + int val; /* bit accumulator */ + + /* load at least need bits into val */ + val = s->bitbuf; + while (s->bitcnt < need) { + if (s->left == 0) { + s->left = s->infun(s->inhow, &(s->in)); + if (s->left == 0) longjmp(s->env, 1); /* out of input */ + } + val |= (int)(*(s->in)++) << s->bitcnt; /* load eight bits */ + s->left--; + s->bitcnt += 8; + } + + /* drop need bits and update buffer, always zero to seven bits left */ + s->bitbuf = val >> need; + s->bitcnt -= need; + + /* return need bits, zeroing the bits above that */ + return val & ((1 << need) - 1); +} + +/* + * Huffman code decoding tables. count[1..MAXBITS] is the number of symbols of + * each length, which for a canonical code are stepped through in order. + * symbol[] are the symbol values in canonical order, where the number of + * entries is the sum of the counts in count[]. The decoding process can be + * seen in the function decode() below. + */ +struct huffman { + short *count; /* number of symbols of each length */ + short *symbol; /* canonically ordered symbols */ +}; + +/* + * Decode a code from the stream s using huffman table h. Return the symbol or + * a negative value if there is an error. If all of the lengths are zero, i.e. + * an empty code, or if the code is incomplete and an invalid code is received, + * then -9 is returned after reading MAXBITS bits. + * + * Format notes: + * + * - The codes as stored in the compressed data are bit-reversed relative to + * a simple integer ordering of codes of the same lengths. Hence below the + * bits are pulled from the compressed data one at a time and used to + * build the code value reversed from what is in the stream in order to + * permit simple integer comparisons for decoding. + * + * - The first code for the shortest length is all ones. Subsequent codes of + * the same length are simply integer decrements of the previous code. When + * moving up a length, a one bit is appended to the code. For a complete + * code, the last code of the longest length will be all zeros. To support + * this ordering, the bits pulled during decoding are inverted to apply the + * more "natural" ordering starting with all zeros and incrementing. + */ +local int decode(struct state *s, struct huffman *h) +{ + int len; /* current number of bits in code */ + int code; /* len bits being decoded */ + int first; /* first code of length len */ + int count; /* number of codes of length len */ + int index; /* index of first code of length len in symbol table */ + int bitbuf; /* bits from stream */ + int left; /* bits left in next or left to process */ + short *next; /* next number of codes */ + + bitbuf = s->bitbuf; + left = s->bitcnt; + code = first = index = 0; + len = 1; + next = h->count + 1; + while (1) { + while (left--) { + code |= (bitbuf & 1) ^ 1; /* invert code */ + bitbuf >>= 1; + count = *next++; + if (code < first + count) { /* if length len, return symbol */ + s->bitbuf = bitbuf; + s->bitcnt = (s->bitcnt - len) & 7; + return h->symbol[index + (code - first)]; + } + index += count; /* else update for next length */ + first += count; + first <<= 1; + code <<= 1; + len++; + } + left = (MAXBITS+1) - len; + if (left == 0) break; + if (s->left == 0) { + s->left = s->infun(s->inhow, &(s->in)); + if (s->left == 0) longjmp(s->env, 1); /* out of input */ + } + bitbuf = *(s->in)++; + s->left--; + if (left > 8) left = 8; + } + return -9; /* ran out of codes */ +} + +/* + * Given a list of repeated code lengths rep[0..n-1], where each byte is a + * count (high four bits + 1) and a code length (low four bits), generate the + * list of code lengths. This compaction reduces the size of the object code. + * Then given the list of code lengths length[0..n-1] representing a canonical + * Huffman code for n symbols, construct the tables required to decode those + * codes. Those tables are the number of codes of each length, and the symbols + * sorted by length, retaining their original order within each length. The + * return value is zero for a complete code set, negative for an over- + * subscribed code set, and positive for an incomplete code set. The tables + * can be used if the return value is zero or positive, but they cannot be used + * if the return value is negative. If the return value is zero, it is not + * possible for decode() using that table to return an error--any stream of + * enough bits will resolve to a symbol. If the return value is positive, then + * it is possible for decode() using that table to return an error for received + * codes past the end of the incomplete lengths. + */ +local int construct(struct huffman *h, const unsigned char *rep, int n) +{ + int symbol; /* current symbol when stepping through length[] */ + int len; /* current length when stepping through h->count[] */ + int left; /* number of possible codes left of current length */ + short offs[MAXBITS+1]; /* offsets in symbol table for each length */ + short length[256]; /* code lengths */ + + /* convert compact repeat counts into symbol bit length list */ + symbol = 0; + do { + len = *rep++; + left = (len >> 4) + 1; + len &= 15; + do { + length[symbol++] = len; + } while (--left); + } while (--n); + n = symbol; + + /* count number of codes of each length */ + for (len = 0; len <= MAXBITS; len++) + h->count[len] = 0; + for (symbol = 0; symbol < n; symbol++) + (h->count[length[symbol]])++; /* assumes lengths are within bounds */ + if (h->count[0] == n) /* no codes! */ + return 0; /* complete, but decode() will fail */ + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; /* one possible code of zero length */ + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; /* one more bit, double codes left */ + left -= h->count[len]; /* deduct count from possible codes */ + if (left < 0) return left; /* over-subscribed--return negative */ + } /* left > 0 means incomplete */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + h->count[len]; + + /* + * put symbols in table sorted by length, by symbol order within each + * length + */ + for (symbol = 0; symbol < n; symbol++) + if (length[symbol] != 0) + h->symbol[offs[length[symbol]]++] = symbol; + + /* return zero for complete set, positive for incomplete set */ + return left; +} + +/* + * Decode PKWare Compression Library stream. + * + * Format notes: + * + * - First byte is 0 if literals are uncoded or 1 if they are coded. Second + * byte is 4, 5, or 6 for the number of extra bits in the distance code. + * This is the base-2 logarithm of the dictionary size minus six. + * + * - Compressed data is a combination of literals and length/distance pairs + * terminated by an end code. Literals are either Huffman coded or + * uncoded bytes. A length/distance pair is a coded length followed by a + * coded distance to represent a string that occurs earlier in the + * uncompressed data that occurs again at the current location. + * + * - A bit preceding a literal or length/distance pair indicates which comes + * next, 0 for literals, 1 for length/distance. + * + * - If literals are uncoded, then the next eight bits are the literal, in the + * normal bit order in th stream, i.e. no bit-reversal is needed. Similarly, + * no bit reversal is needed for either the length extra bits or the distance + * extra bits. + * + * - Literal bytes are simply written to the output. A length/distance pair is + * an instruction to copy previously uncompressed bytes to the output. The + * copy is from distance bytes back in the output stream, copying for length + * bytes. + * + * - Distances pointing before the beginning of the output data are not + * permitted. + * + * - Overlapped copies, where the length is greater than the distance, are + * allowed and common. For example, a distance of one and a length of 518 + * simply copies the last byte 518 times. A distance of four and a length of + * twelve copies the last four bytes three times. A simple forward copy + * ignoring whether the length is greater than the distance or not implements + * this correctly. + */ +local int decomp(struct state *s) +{ + int lit; /* true if literals are coded */ + int dict; /* log2(dictionary size) - 6 */ + int symbol; /* decoded symbol, extra bits for distance */ + int len; /* length for copy */ + unsigned dist; /* distance for copy */ + int copy; /* copy counter */ + unsigned char *from, *to; /* copy pointers */ + static int virgin = 1; /* build tables once */ + static short litcnt[MAXBITS+1], litsym[256]; /* litcode memory */ + static short lencnt[MAXBITS+1], lensym[16]; /* lencode memory */ + static short distcnt[MAXBITS+1], distsym[64]; /* distcode memory */ + static struct huffman litcode = {litcnt, litsym}; /* length code */ + static struct huffman lencode = {lencnt, lensym}; /* length code */ + static struct huffman distcode = {distcnt, distsym};/* distance code */ + /* bit lengths of literal codes */ + static const unsigned char litlen[] = { + 11, 124, 8, 7, 28, 7, 188, 13, 76, 4, 10, 8, 12, 10, 12, 10, 8, 23, 8, + 9, 7, 6, 7, 8, 7, 6, 55, 8, 23, 24, 12, 11, 7, 9, 11, 12, 6, 7, 22, 5, + 7, 24, 6, 11, 9, 6, 7, 22, 7, 11, 38, 7, 9, 8, 25, 11, 8, 11, 9, 12, + 8, 12, 5, 38, 5, 38, 5, 11, 7, 5, 6, 21, 6, 10, 53, 8, 7, 24, 10, 27, + 44, 253, 253, 253, 252, 252, 252, 13, 12, 45, 12, 45, 12, 61, 12, 45, + 44, 173}; + /* bit lengths of length codes 0..15 */ + static const unsigned char lenlen[] = {2, 35, 36, 53, 38, 23}; + /* bit lengths of distance codes 0..63 */ + static const unsigned char distlen[] = {2, 20, 53, 230, 247, 151, 248}; + static const short base[16] = { /* base for length codes */ + 3, 2, 4, 5, 6, 7, 8, 9, 10, 12, 16, 24, 40, 72, 136, 264}; + static const char extra[16] = { /* extra bits for length codes */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 7, 8}; + + /* set up decoding tables (once--might not be thread-safe) */ + if (virgin) { + construct(&litcode, litlen, sizeof(litlen)); + construct(&lencode, lenlen, sizeof(lenlen)); + construct(&distcode, distlen, sizeof(distlen)); + virgin = 0; + } + + /* read header */ + lit = bits(s, 8); + if (lit > 1) return -1; + dict = bits(s, 8); + if (dict < 4 || dict > 6) return -2; + + /* decode literals and length/distance pairs */ + do { + if (bits(s, 1)) { + /* get length */ + symbol = decode(s, &lencode); + len = base[symbol] + bits(s, extra[symbol]); + if (len == 519) break; /* end code */ + + /* get distance */ + symbol = len == 2 ? 2 : dict; + dist = decode(s, &distcode) << symbol; + dist += bits(s, symbol); + dist++; + if (s->first && dist > s->next) + return -3; /* distance too far back */ + + /* copy length bytes from distance bytes back */ + do { + to = s->out + s->next; + from = to - dist; + copy = MAXWIN; + if (s->next < dist) { + from += copy; + copy = dist; + } + copy -= s->next; + if (copy > len) copy = len; + len -= copy; + s->next += copy; + do { + *to++ = *from++; + } while (--copy); + if (s->next == MAXWIN) { + if (s->outfun(s->outhow, s->out, s->next)) return 1; + s->next = 0; + s->first = 0; + } + } while (len != 0); + } + else { + /* get literal and write it */ + symbol = lit ? decode(s, &litcode) : bits(s, 8); + s->out[s->next++] = symbol; + if (s->next == MAXWIN) { + if (s->outfun(s->outhow, s->out, s->next)) return 1; + s->next = 0; + s->first = 0; + } + } + } while (1); + return 0; +} + +/* See comments in blast.h */ +int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow) +{ + struct state s; /* input/output state */ + int err; /* return value */ + + /* initialize input state */ + s.infun = infun; + s.inhow = inhow; + s.left = 0; + s.bitbuf = 0; + s.bitcnt = 0; + + /* initialize output state */ + s.outfun = outfun; + s.outhow = outhow; + s.next = 0; + s.first = 1; + + /* return if bits() or decode() tries to read past available input */ + if (setjmp(s.env) != 0) /* if came back here via longjmp(), */ + err = 2; /* then skip decomp(), return error */ + else + err = decomp(&s); /* decompress */ + + /* write any leftover output and update the error code if needed */ + if (err != 1 && s.next && s.outfun(s.outhow, s.out, s.next) && err == 0) + err = 1; + return err; +} + +#ifdef TEST +/* Example of how to use blast() */ +#include +#include + +#define CHUNK 16384 + +local unsigned inf(void *how, unsigned char **buf) +{ + static unsigned char hold[CHUNK]; + + *buf = hold; + return fread(hold, 1, CHUNK, (FILE *)how); +} + +local int outf(void *how, unsigned char *buf, unsigned len) +{ + return fwrite(buf, 1, len, (FILE *)how) != len; +} + +/* Decompress a PKWare Compression Library stream from stdin to stdout */ +int main(void) +{ + int ret, n; + + /* decompress to stdout */ + ret = blast(inf, stdin, outf, stdout); + if (ret != 0) fprintf(stderr, "blast error: %d\n", ret); + + /* see if there are any leftover bytes */ + n = 0; + while (getchar() != EOF) n++; + if (n) fprintf(stderr, "blast warning: %d unused bytes of input\n", n); + + /* return blast() error code */ + return ret; +} +#endif diff --git a/src/SDL2/external/zlib-1.2.8/contrib/blast/blast.h b/src/SDL2/external/zlib-1.2.8/contrib/blast/blast.h new file mode 100644 index 000000000..658cfd320 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/blast/blast.h @@ -0,0 +1,75 @@ +/* blast.h -- interface for blast.c + Copyright (C) 2003, 2012 Mark Adler + version 1.2, 24 Oct 2012 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + + +/* + * blast() decompresses the PKWare Data Compression Library (DCL) compressed + * format. It provides the same functionality as the explode() function in + * that library. (Note: PKWare overused the "implode" verb, and the format + * used by their library implode() function is completely different and + * incompatible with the implode compression method supported by PKZIP.) + * + * The binary mode for stdio functions should be used to assure that the + * compressed data is not corrupted when read or written. For example: + * fopen(..., "rb") and fopen(..., "wb"). + */ + + +typedef unsigned (*blast_in)(void *how, unsigned char **buf); +typedef int (*blast_out)(void *how, unsigned char *buf, unsigned len); +/* Definitions for input/output functions passed to blast(). See below for + * what the provided functions need to do. + */ + + +int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow); +/* Decompress input to output using the provided infun() and outfun() calls. + * On success, the return value of blast() is zero. If there is an error in + * the source data, i.e. it is not in the proper format, then a negative value + * is returned. If there is not enough input available or there is not enough + * output space, then a positive error is returned. + * + * The input function is invoked: len = infun(how, &buf), where buf is set by + * infun() to point to the input buffer, and infun() returns the number of + * available bytes there. If infun() returns zero, then blast() returns with + * an input error. (blast() only asks for input if it needs it.) inhow is for + * use by the application to pass an input descriptor to infun(), if desired. + * + * The output function is invoked: err = outfun(how, buf, len), where the bytes + * to be written are buf[0..len-1]. If err is not zero, then blast() returns + * with an output error. outfun() is always called with len <= 4096. outhow + * is for use by the application to pass an output descriptor to outfun(), if + * desired. + * + * The return codes are: + * + * 2: ran out of input before completing decompression + * 1: output error before completing decompression + * 0: successful decompression + * -1: literal flag not zero or one + * -2: dictionary size not in 4..6 + * -3: distance is too far back + * + * At the bottom of blast.c is an example program that uses blast() that can be + * compiled to produce a command-line decompression filter by defining TEST. + */ diff --git a/src/SDL2/external/zlib-1.2.8/contrib/blast/test.pk b/src/SDL2/external/zlib-1.2.8/contrib/blast/test.pk new file mode 100644 index 0000000000000000000000000000000000000000..be10b2bbb251759ffdf6da49fadd1a3f137a54c1 GIT binary patch literal 8 PcmZQzX;M+`Z>R?V2c!aC literal 0 HcmV?d00001 diff --git a/src/SDL2/external/zlib-1.2.8/contrib/blast/test.txt b/src/SDL2/external/zlib-1.2.8/contrib/blast/test.txt new file mode 100644 index 000000000..bfdf1c5dc --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/blast/test.txt @@ -0,0 +1 @@ +AIAIAIAIAIAIA \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/delphi/ZLib.pas b/src/SDL2/external/zlib-1.2.8/contrib/delphi/ZLib.pas new file mode 100644 index 000000000..a579974f0 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/delphi/ZLib.pas @@ -0,0 +1,557 @@ +{*******************************************************} +{ } +{ Borland Delphi Supplemental Components } +{ ZLIB Data Compression Interface Unit } +{ } +{ Copyright (c) 1997,99 Borland Corporation } +{ } +{*******************************************************} + +{ Updated for zlib 1.2.x by Cosmin Truta } + +unit ZLib; + +interface + +uses SysUtils, Classes; + +type + TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer; cdecl; + TFree = procedure (AppData, Block: Pointer); cdecl; + + // Internal structure. Ignore. + TZStreamRec = packed record + next_in: PChar; // next input byte + avail_in: Integer; // number of bytes available at next_in + total_in: Longint; // total nb of input bytes read so far + + next_out: PChar; // next output byte should be put here + avail_out: Integer; // remaining free space at next_out + total_out: Longint; // total nb of bytes output so far + + msg: PChar; // last error message, NULL if no error + internal: Pointer; // not visible by applications + + zalloc: TAlloc; // used to allocate the internal state + zfree: TFree; // used to free the internal state + AppData: Pointer; // private data object passed to zalloc and zfree + + data_type: Integer; // best guess about the data type: ascii or binary + adler: Longint; // adler32 value of the uncompressed data + reserved: Longint; // reserved for future use + end; + + // Abstract ancestor class + TCustomZlibStream = class(TStream) + private + FStrm: TStream; + FStrmPos: Integer; + FOnProgress: TNotifyEvent; + FZRec: TZStreamRec; + FBuffer: array [Word] of Char; + protected + procedure Progress(Sender: TObject); dynamic; + property OnProgress: TNotifyEvent read FOnProgress write FOnProgress; + constructor Create(Strm: TStream); + end; + +{ TCompressionStream compresses data on the fly as data is written to it, and + stores the compressed data to another stream. + + TCompressionStream is write-only and strictly sequential. Reading from the + stream will raise an exception. Using Seek to move the stream pointer + will raise an exception. + + Output data is cached internally, written to the output stream only when + the internal output buffer is full. All pending output data is flushed + when the stream is destroyed. + + The Position property returns the number of uncompressed bytes of + data that have been written to the stream so far. + + CompressionRate returns the on-the-fly percentage by which the original + data has been compressed: (1 - (CompressedBytes / UncompressedBytes)) * 100 + If raw data size = 100 and compressed data size = 25, the CompressionRate + is 75% + + The OnProgress event is called each time the output buffer is filled and + written to the output stream. This is useful for updating a progress + indicator when you are writing a large chunk of data to the compression + stream in a single call.} + + + TCompressionLevel = (clNone, clFastest, clDefault, clMax); + + TCompressionStream = class(TCustomZlibStream) + private + function GetCompressionRate: Single; + public + constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream); + destructor Destroy; override; + function Read(var Buffer; Count: Longint): Longint; override; + function Write(const Buffer; Count: Longint): Longint; override; + function Seek(Offset: Longint; Origin: Word): Longint; override; + property CompressionRate: Single read GetCompressionRate; + property OnProgress; + end; + +{ TDecompressionStream decompresses data on the fly as data is read from it. + + Compressed data comes from a separate source stream. TDecompressionStream + is read-only and unidirectional; you can seek forward in the stream, but not + backwards. The special case of setting the stream position to zero is + allowed. Seeking forward decompresses data until the requested position in + the uncompressed data has been reached. Seeking backwards, seeking relative + to the end of the stream, requesting the size of the stream, and writing to + the stream will raise an exception. + + The Position property returns the number of bytes of uncompressed data that + have been read from the stream so far. + + The OnProgress event is called each time the internal input buffer of + compressed data is exhausted and the next block is read from the input stream. + This is useful for updating a progress indicator when you are reading a + large chunk of data from the decompression stream in a single call.} + + TDecompressionStream = class(TCustomZlibStream) + public + constructor Create(Source: TStream); + destructor Destroy; override; + function Read(var Buffer; Count: Longint): Longint; override; + function Write(const Buffer; Count: Longint): Longint; override; + function Seek(Offset: Longint; Origin: Word): Longint; override; + property OnProgress; + end; + + + +{ CompressBuf compresses data, buffer to buffer, in one call. + In: InBuf = ptr to compressed data + InBytes = number of bytes in InBuf + Out: OutBuf = ptr to newly allocated buffer containing decompressed data + OutBytes = number of bytes in OutBuf } +procedure CompressBuf(const InBuf: Pointer; InBytes: Integer; + out OutBuf: Pointer; out OutBytes: Integer); + + +{ DecompressBuf decompresses data, buffer to buffer, in one call. + In: InBuf = ptr to compressed data + InBytes = number of bytes in InBuf + OutEstimate = zero, or est. size of the decompressed data + Out: OutBuf = ptr to newly allocated buffer containing decompressed data + OutBytes = number of bytes in OutBuf } +procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer; + OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer); + +{ DecompressToUserBuf decompresses data, buffer to buffer, in one call. + In: InBuf = ptr to compressed data + InBytes = number of bytes in InBuf + Out: OutBuf = ptr to user-allocated buffer to contain decompressed data + BufSize = number of bytes in OutBuf } +procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer; + const OutBuf: Pointer; BufSize: Integer); + +const + zlib_version = '1.2.8'; + +type + EZlibError = class(Exception); + ECompressionError = class(EZlibError); + EDecompressionError = class(EZlibError); + +implementation + +uses ZLibConst; + +const + Z_NO_FLUSH = 0; + Z_PARTIAL_FLUSH = 1; + Z_SYNC_FLUSH = 2; + Z_FULL_FLUSH = 3; + Z_FINISH = 4; + + Z_OK = 0; + Z_STREAM_END = 1; + Z_NEED_DICT = 2; + Z_ERRNO = (-1); + Z_STREAM_ERROR = (-2); + Z_DATA_ERROR = (-3); + Z_MEM_ERROR = (-4); + Z_BUF_ERROR = (-5); + Z_VERSION_ERROR = (-6); + + Z_NO_COMPRESSION = 0; + Z_BEST_SPEED = 1; + Z_BEST_COMPRESSION = 9; + Z_DEFAULT_COMPRESSION = (-1); + + Z_FILTERED = 1; + Z_HUFFMAN_ONLY = 2; + Z_RLE = 3; + Z_DEFAULT_STRATEGY = 0; + + Z_BINARY = 0; + Z_ASCII = 1; + Z_UNKNOWN = 2; + + Z_DEFLATED = 8; + + +{$L adler32.obj} +{$L compress.obj} +{$L crc32.obj} +{$L deflate.obj} +{$L infback.obj} +{$L inffast.obj} +{$L inflate.obj} +{$L inftrees.obj} +{$L trees.obj} +{$L uncompr.obj} +{$L zutil.obj} + +procedure adler32; external; +procedure compressBound; external; +procedure crc32; external; +procedure deflateInit2_; external; +procedure deflateParams; external; + +function _malloc(Size: Integer): Pointer; cdecl; +begin + Result := AllocMem(Size); +end; + +procedure _free(Block: Pointer); cdecl; +begin + FreeMem(Block); +end; + +procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl; +begin + FillChar(P^, count, B); +end; + +procedure _memcpy(dest, source: Pointer; count: Integer); cdecl; +begin + Move(source^, dest^, count); +end; + + + +// deflate compresses data +function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar; + recsize: Integer): Integer; external; +function deflate(var strm: TZStreamRec; flush: Integer): Integer; external; +function deflateEnd(var strm: TZStreamRec): Integer; external; + +// inflate decompresses data +function inflateInit_(var strm: TZStreamRec; version: PChar; + recsize: Integer): Integer; external; +function inflate(var strm: TZStreamRec; flush: Integer): Integer; external; +function inflateEnd(var strm: TZStreamRec): Integer; external; +function inflateReset(var strm: TZStreamRec): Integer; external; + + +function zlibAllocMem(AppData: Pointer; Items, Size: Integer): Pointer; cdecl; +begin +// GetMem(Result, Items*Size); + Result := AllocMem(Items * Size); +end; + +procedure zlibFreeMem(AppData, Block: Pointer); cdecl; +begin + FreeMem(Block); +end; + +{function zlibCheck(code: Integer): Integer; +begin + Result := code; + if code < 0 then + raise EZlibError.Create('error'); //!! +end;} + +function CCheck(code: Integer): Integer; +begin + Result := code; + if code < 0 then + raise ECompressionError.Create('error'); //!! +end; + +function DCheck(code: Integer): Integer; +begin + Result := code; + if code < 0 then + raise EDecompressionError.Create('error'); //!! +end; + +procedure CompressBuf(const InBuf: Pointer; InBytes: Integer; + out OutBuf: Pointer; out OutBytes: Integer); +var + strm: TZStreamRec; + P: Pointer; +begin + FillChar(strm, sizeof(strm), 0); + strm.zalloc := zlibAllocMem; + strm.zfree := zlibFreeMem; + OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255; + GetMem(OutBuf, OutBytes); + try + strm.next_in := InBuf; + strm.avail_in := InBytes; + strm.next_out := OutBuf; + strm.avail_out := OutBytes; + CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm))); + try + while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do + begin + P := OutBuf; + Inc(OutBytes, 256); + ReallocMem(OutBuf, OutBytes); + strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P))); + strm.avail_out := 256; + end; + finally + CCheck(deflateEnd(strm)); + end; + ReallocMem(OutBuf, strm.total_out); + OutBytes := strm.total_out; + except + FreeMem(OutBuf); + raise + end; +end; + + +procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer; + OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer); +var + strm: TZStreamRec; + P: Pointer; + BufInc: Integer; +begin + FillChar(strm, sizeof(strm), 0); + strm.zalloc := zlibAllocMem; + strm.zfree := zlibFreeMem; + BufInc := (InBytes + 255) and not 255; + if OutEstimate = 0 then + OutBytes := BufInc + else + OutBytes := OutEstimate; + GetMem(OutBuf, OutBytes); + try + strm.next_in := InBuf; + strm.avail_in := InBytes; + strm.next_out := OutBuf; + strm.avail_out := OutBytes; + DCheck(inflateInit_(strm, zlib_version, sizeof(strm))); + try + while DCheck(inflate(strm, Z_NO_FLUSH)) <> Z_STREAM_END do + begin + P := OutBuf; + Inc(OutBytes, BufInc); + ReallocMem(OutBuf, OutBytes); + strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P))); + strm.avail_out := BufInc; + end; + finally + DCheck(inflateEnd(strm)); + end; + ReallocMem(OutBuf, strm.total_out); + OutBytes := strm.total_out; + except + FreeMem(OutBuf); + raise + end; +end; + +procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer; + const OutBuf: Pointer; BufSize: Integer); +var + strm: TZStreamRec; +begin + FillChar(strm, sizeof(strm), 0); + strm.zalloc := zlibAllocMem; + strm.zfree := zlibFreeMem; + strm.next_in := InBuf; + strm.avail_in := InBytes; + strm.next_out := OutBuf; + strm.avail_out := BufSize; + DCheck(inflateInit_(strm, zlib_version, sizeof(strm))); + try + if DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END then + raise EZlibError.CreateRes(@sTargetBufferTooSmall); + finally + DCheck(inflateEnd(strm)); + end; +end; + +// TCustomZlibStream + +constructor TCustomZLibStream.Create(Strm: TStream); +begin + inherited Create; + FStrm := Strm; + FStrmPos := Strm.Position; + FZRec.zalloc := zlibAllocMem; + FZRec.zfree := zlibFreeMem; +end; + +procedure TCustomZLibStream.Progress(Sender: TObject); +begin + if Assigned(FOnProgress) then FOnProgress(Sender); +end; + + +// TCompressionStream + +constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel; + Dest: TStream); +const + Levels: array [TCompressionLevel] of ShortInt = + (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION); +begin + inherited Create(Dest); + FZRec.next_out := FBuffer; + FZRec.avail_out := sizeof(FBuffer); + CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec))); +end; + +destructor TCompressionStream.Destroy; +begin + FZRec.next_in := nil; + FZRec.avail_in := 0; + try + if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos; + while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END) + and (FZRec.avail_out = 0) do + begin + FStrm.WriteBuffer(FBuffer, sizeof(FBuffer)); + FZRec.next_out := FBuffer; + FZRec.avail_out := sizeof(FBuffer); + end; + if FZRec.avail_out < sizeof(FBuffer) then + FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out); + finally + deflateEnd(FZRec); + end; + inherited Destroy; +end; + +function TCompressionStream.Read(var Buffer; Count: Longint): Longint; +begin + raise ECompressionError.CreateRes(@sInvalidStreamOp); +end; + +function TCompressionStream.Write(const Buffer; Count: Longint): Longint; +begin + FZRec.next_in := @Buffer; + FZRec.avail_in := Count; + if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos; + while (FZRec.avail_in > 0) do + begin + CCheck(deflate(FZRec, 0)); + if FZRec.avail_out = 0 then + begin + FStrm.WriteBuffer(FBuffer, sizeof(FBuffer)); + FZRec.next_out := FBuffer; + FZRec.avail_out := sizeof(FBuffer); + FStrmPos := FStrm.Position; + Progress(Self); + end; + end; + Result := Count; +end; + +function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint; +begin + if (Offset = 0) and (Origin = soFromCurrent) then + Result := FZRec.total_in + else + raise ECompressionError.CreateRes(@sInvalidStreamOp); +end; + +function TCompressionStream.GetCompressionRate: Single; +begin + if FZRec.total_in = 0 then + Result := 0 + else + Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0; +end; + + +// TDecompressionStream + +constructor TDecompressionStream.Create(Source: TStream); +begin + inherited Create(Source); + FZRec.next_in := FBuffer; + FZRec.avail_in := 0; + DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec))); +end; + +destructor TDecompressionStream.Destroy; +begin + FStrm.Seek(-FZRec.avail_in, 1); + inflateEnd(FZRec); + inherited Destroy; +end; + +function TDecompressionStream.Read(var Buffer; Count: Longint): Longint; +begin + FZRec.next_out := @Buffer; + FZRec.avail_out := Count; + if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos; + while (FZRec.avail_out > 0) do + begin + if FZRec.avail_in = 0 then + begin + FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer)); + if FZRec.avail_in = 0 then + begin + Result := Count - FZRec.avail_out; + Exit; + end; + FZRec.next_in := FBuffer; + FStrmPos := FStrm.Position; + Progress(Self); + end; + CCheck(inflate(FZRec, 0)); + end; + Result := Count; +end; + +function TDecompressionStream.Write(const Buffer; Count: Longint): Longint; +begin + raise EDecompressionError.CreateRes(@sInvalidStreamOp); +end; + +function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint; +var + I: Integer; + Buf: array [0..4095] of Char; +begin + if (Offset = 0) and (Origin = soFromBeginning) then + begin + DCheck(inflateReset(FZRec)); + FZRec.next_in := FBuffer; + FZRec.avail_in := 0; + FStrm.Position := 0; + FStrmPos := 0; + end + else if ( (Offset >= 0) and (Origin = soFromCurrent)) or + ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then + begin + if Origin = soFromBeginning then Dec(Offset, FZRec.total_out); + if Offset > 0 then + begin + for I := 1 to Offset div sizeof(Buf) do + ReadBuffer(Buf, sizeof(Buf)); + ReadBuffer(Buf, Offset mod sizeof(Buf)); + end; + end + else + raise EDecompressionError.CreateRes(@sInvalidStreamOp); + Result := FZRec.total_out; +end; + + +end. diff --git a/src/SDL2/external/zlib-1.2.8/contrib/delphi/ZLibConst.pas b/src/SDL2/external/zlib-1.2.8/contrib/delphi/ZLibConst.pas new file mode 100644 index 000000000..cdfe13671 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/delphi/ZLibConst.pas @@ -0,0 +1,11 @@ +unit ZLibConst; + +interface + +resourcestring + sTargetBufferTooSmall = 'ZLib error: target buffer may be too small'; + sInvalidStreamOp = 'Invalid stream operation'; + +implementation + +end. diff --git a/src/SDL2/external/zlib-1.2.8/contrib/delphi/readme.txt b/src/SDL2/external/zlib-1.2.8/contrib/delphi/readme.txt new file mode 100644 index 000000000..2dc9a8bba --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/delphi/readme.txt @@ -0,0 +1,76 @@ + +Overview +======== + +This directory contains an update to the ZLib interface unit, +distributed by Borland as a Delphi supplemental component. + +The original ZLib unit is Copyright (c) 1997,99 Borland Corp., +and is based on zlib version 1.0.4. There are a series of bugs +and security problems associated with that old zlib version, and +we recommend the users to update their ZLib unit. + + +Summary of modifications +======================== + +- Improved makefile, adapted to zlib version 1.2.1. + +- Some field types from TZStreamRec are changed from Integer to + Longint, for consistency with the zlib.h header, and for 64-bit + readiness. + +- The zlib_version constant is updated. + +- The new Z_RLE strategy has its corresponding symbolic constant. + +- The allocation and deallocation functions and function types + (TAlloc, TFree, zlibAllocMem and zlibFreeMem) are now cdecl, + and _malloc and _free are added as C RTL stubs. As a result, + the original C sources of zlib can be compiled out of the box, + and linked to the ZLib unit. + + +Suggestions for improvements +============================ + +Currently, the ZLib unit provides only a limited wrapper around +the zlib library, and much of the original zlib functionality is +missing. Handling compressed file formats like ZIP/GZIP or PNG +cannot be implemented without having this functionality. +Applications that handle these formats are either using their own, +duplicated code, or not using the ZLib unit at all. + +Here are a few suggestions: + +- Checksum class wrappers around adler32() and crc32(), similar + to the Java classes that implement the java.util.zip.Checksum + interface. + +- The ability to read and write raw deflate streams, without the + zlib stream header and trailer. Raw deflate streams are used + in the ZIP file format. + +- The ability to read and write gzip streams, used in the GZIP + file format, and normally produced by the gzip program. + +- The ability to select a different compression strategy, useful + to PNG and MNG image compression, and to multimedia compression + in general. Besides the compression level + + TCompressionLevel = (clNone, clFastest, clDefault, clMax); + + which, in fact, could have used the 'z' prefix and avoided + TColor-like symbols + + TCompressionLevel = (zcNone, zcFastest, zcDefault, zcMax); + + there could be a compression strategy + + TCompressionStrategy = (zsDefault, zsFiltered, zsHuffmanOnly, zsRle); + +- ZIP and GZIP stream handling via TStreams. + + +-- +Cosmin Truta diff --git a/src/SDL2/external/zlib-1.2.8/contrib/delphi/zlibd32.mak b/src/SDL2/external/zlib-1.2.8/contrib/delphi/zlibd32.mak new file mode 100644 index 000000000..9bb00b7cc --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/delphi/zlibd32.mak @@ -0,0 +1,99 @@ +# Makefile for zlib +# For use with Delphi and C++ Builder under Win32 +# Updated for zlib 1.2.x by Cosmin Truta + +# ------------ Borland C++ ------------ + +# This project uses the Delphi (fastcall/register) calling convention: +LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl + +CC = bcc32 +LD = bcc32 +AR = tlib +# do not use "-pr" in CFLAGS +CFLAGS = -a -d -k- -O2 $(LOC) +LDFLAGS = + + +# variables +ZLIB_LIB = zlib.lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj +OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + +minigzip.obj: test/minigzip.c zlib.h zconf.h + + +# For the sake of the old Borland make, +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + + +# cleanup +clean: + -del *.obj + -del *.exe + -del *.lib + -del *.tds + -del zlib.bak + -del foo.gz + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib.build b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib.build new file mode 100644 index 000000000..7f90d6bc7 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib.build @@ -0,0 +1,33 @@ + + + A .Net wrapper library around ZLib1.dll + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib.chm b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib.chm new file mode 100644 index 0000000000000000000000000000000000000000..f214a444aebb20950fb3e8499b36731e1f12be95 GIT binary patch literal 72726 zcmeGEby!tR_Xmt0Lb^-3ySqWUyF;2oNq0+kgMffYgLESxDJ4jYNJ^JTHv%sx-r#-v zJooqc<9Geu_qyC%`^?@mpEY~UXU(jcS?6pdRg}fR004mg^$Bu)%1mlyL4X4QNEaZU zg&sr5>2QFIcf>23$bY-P!QUL1KN5iJZK}ffiW3R5Bgdsi#SjndZHoZ7pFgTx{Kvz zl?C`=WYS*WsmLox3SSrcy2a>U->NFfT;oBWza%PF`f;lwBm?q1PBTK{x+--^IT3kv zWsrnPVqY0p22wFe6GwAd19NMT#CmhT0wib#Qh6aMNjYT|ki;D7XOGYsNY&K^9UN?o z%ncmPoq;mu)=wO6G{*aFfr7n_EzsW4?OK=|9Qg(!4Rmv{u{Zup4&xu0LMrw^AV|WL zwQsr1_s9JrB4XfZ0FoHNo#>AC4@p@ATad(TRwb-|l-$z;f)Is4#Ky?U3TW+k-2@wJ zdNVU4khpqL-+b49mOKH8pXU?Axt4I$k})@=7c{m6+6$Wjjh;9-S<#z0T3Lel_6kK{ z(ESI5s;#ksBT&!A8E9{5V_>Yu@xs_Wvg1a4XW~9`%&`_aeeJ)((#LPDYM4 z_P1bvf^b5Le+4t$qN5&#DE~W}`4*jo5@tpG`?_U;R)#?PTaA4`Y7~qAN1&sbjq%T> zWj@XEAo#1spY)0Yt%3FicWv5~3zH%HFDNCT1JLn@j{f;lA>2&=1^aiq+%n<6i4ckN zzsTKk;{Vw>0`q^7yX^=5y$_%1{V#H?x9w}T45wlIzqjv}X#aBXD6{`Yp_+lE6Y%yC zvAiK_cU|-!MiDY_0MhFjIoaD^52PO=0n>~j#w7n)tM4M;$Bh3eRfG)Hzaa0~Gw=m` zs1Vz~;Qxb71J`(?*#1}9Te}8M!9+6uud=tc4Qv-omi%93Z|xgc;}Ido`oFdJ*2aN( z^3k;aM(sU22kdBss?h)UNBzUU1eD1|h%o%0g>FYzz#EiM{{OqwtqlS?6~amWr9oom zK+B)rBw)xPoR9jy>-LME3J7$1rTMP{_xx4B8EuxqoyY&}(72s(%z?LN30Ou87rAra z|B(4bBfn$pD4YKZzNd|U3Q8pBf8povn)nAnhqK(dWnmj*pwacbW_&kE-I^B!eDF&e= zzkBj6o3~FM*9s%~T{Et&W?*UVerwo}d9M&^{NJ?pzHvh~C_>#H{s#2jz(Kp%;Y`0X z@Dm{?6BD4l@?Q@N9w7}8yj%Eu9}3^ukhlI#J3|f#Lu`Imul>!!L*B{pj=c-S5S`y4 zuW`RxEi}+F4Eb+k>_&rsc--J>v|t0ge>Pdv`Fi@j?J1$rUSY<+!QA(b!HrIlD!<|P z7ylFVO}b9F@p~coG=qg7vHB_q7h1r3{n#+fe>h8z0>mi+=#_ zX%duU7QywmcK=kGfX+b6A00F_2Rs_*9zsc&h52vBsv-z? zxaaqOLHvF7!SbWlux6I~D}CYrCUa}Xurk*BEB#+Y{?RW&zi8fH>HjD2txFF*a=X9M z|4-;!FBN(vbAP4(3;Gueg|?vFU+Mo1c+XN{VO%*LcisJ$K_+2feY3f`rELr zJe2%;+xxr25HSWJ1O5n30L~7!4rT+I2HFJ51=0yZ?STQf6qqY$0th@v6o4OK0=U`# z(?Z#%dGKq@!3>E)vb-&IgQ7?o;=7W_=qr> zNUgi+?Ow4A(Aw1TcD)h#nk|C;w;CzfIGF#4Gu%WAB0HW$-1E`*YP;h!s!S#M_hj8* zgxr3T71aY9N_}U>dv)CrA2rMt#dbI1e!)22Z$Q*%iwK9`QgzQfQJXr6F2AkqJLpce zXn&Px?7JE8?y>*quMx{0VfuHY_qWJf?-jA59i{Lu&|B9PaYYk}@H?aZG7ch=$@^7* zkGeM!B8TPM>3-Mfzt1s|5nQqE@PBor@4d&jfGZ37&XGx4{})FVlcay&k^L5X>&Rjv zaql~_zo5T3vY33K`;P1{(0xZ1Q|25>e&=)k!hBagI?g&=^sZC?Ec}NJqsO^|#qK)d zPuwqDN2jyg_c?c%drU{qJ}t$&v&S{YhF-$JK?G>%WcvN)yH>F=tRbQ|p}HR-xx0dx zdfYJazlq;0_T)|EO-%lZ4aFwAg(%#)nD630PzpBY);E*PkEdixhA8~fCL8)6FjdK) z0gu>1tPrWYF>|jfRT&#=)7y$FjY8z^hQfD{ssqsBI*NK7EwgmHS#{nb8<|3M?iM=V zk!siBwC_R68|M+*fe<3}t4{y0Ma&+4@T0rs)=ee9*dgYvQ7O;eChVsC@BKLDR3}mW zZY6XR_!M92`IrQfOLS5E*Rk&7G})H(ik4)Z7FlAp$%Y z4&gf2#?j;^r0_j6e%mn^_g0`xVT42e~2LWd0%_zvdF;1&76%6hF32tv=dGj!U z1uoUU;;%KbzUf2&LnwxS1*_N_SUZ^5*jq7tSD%+$?|%^S;1CmL=Hy~!q~j7{VWMMV z61lz-V&Jxr-`6Pf_{Lii%x zdZoL)i++*|5t=&fa-*N3>gCP@d3pHNAOm#Lr_Lg7m#Xz(9Ql|at87Hcm8)v z@Si*TA8W$9;J}}&KMed~;12_T82H1$9|ry~@P~mv4E$l>4+DP~_`|>-2L3c!ufYge={Z>GIXM`auggilzhiMD^ZmVvAHsn0 zKJ~2h7aczvcilR8z|YX(O$-PC20*yZxc3480OC5w_?Mgq0BC@$gR!*)(9#wFdHt+1 zD5GMy>-6Th<_bxLL|OI~aW%-zV}ict{&<7q_VSmvJZ^r~@%Q5f_m_%4h5n>}82H1$ z9|ry~@P~mv4E$l>4+DP~_`|>-2L3Schk-u~{J)9;#M@W^64Fidgau511pq))O(ryd z1lkJ<4U}b!vlFh=$D7i8MMuk2Nz7V{XY;j|=6tiZHcmtQJY)|M{NXWUF#tfqtS<@y zkOZWYRRSyJ)PzW-rIW-?Bok@f2oou!{V6E}wf86Bn|cRo9k!a1=<6%bC$jZADJ=&a z7pWfWw>tNp1R$Ovql(VwWf2_s5U3IgsvhL#TSH^So#=o{Uuy^+Qqys*;DvUL}rA?=4`lbR=jsW0?YvR*h$HnNhp= zC!izu;7A+DiZ@kulAlK{n{*^;+WBXnvVm^`j#IMvXU-V}_qao1<69ICjx z#>je?dOT5Wl|%`3vbEPHG~%aFZzYFws0JrvGib&2P+KG9gm@|Na;`dR;@hXdF0GoZ zA-H|QH*e*41=$Iq5bI%HN<7~G#@%@RB7i{JIIaZ}5Wwy4o<;eoy+hDvrhjIDL?wm@1uB1Q#CKL+EnX#od_o5Ll)IMaO z7NBj&@^Kd;)<%OES%^J;dru5(Byz|)wNe231+*1B;m&Izkxf{~q>@M^K5oRE!sTob zc|{J+dp9AWy9VYkT9+9Xs~h za7ux3s^H@U1XPuqE^Qhl@AX5bvU0-YlbYY7u#DLoD@_$+y~NzrtM0>7+1`o^!%<4#Gz6nx%!45)1j#*6H%w}%lL>bkPU;E?AJ8F+BF#1h*)IhVyMi_Ov zsP^M0U`mpo15%jKwLnIhv>I@EEM%1`z#gA-uZa|{w;0Fa<;p*AlslXpj&U`@7sC2t z^zDl(eNUPt;1!(3LTitPAQ;BOW~318lc{z8PH}Qizn}}TOCKI8urso=eH&5)*=8`` zp2~o#l&9$#hnp<9m0A6^0!0mYp=~A0p6kv&f``RmG&`p&3S1xA1q#Z&mWDQ+e8$QU zdYCmRYx5Uo_^3Kpt2*gWb+llW=!(}qid*e*;K%r3yXT@z9M~6J6s4W)yAYFWe5HLK zLzt|wA*)yYu{qhsS{D>18jm#IH$G*d<0Wc!%;ZV=R!Zbb{^7V)aDh~#YlpjpjKM9N=; z>p{p}tsH%-GWJ_W?06|`VM8Q3<;UnLcV=dbQ(dHnG(Sljt7YptrcYv!i*oOTH}{dKWA=+9*g{ZYWJuh2k-7#a>5t$bF)tT%YE zXknN}yshg~aR3ihYrf2JAi1;`U>8O3G~wXHJT%z47}=uULl5)|GbC{@3l!y+B2*~f z5DjcU3lNj0L9LvJs2$yYo&PnlA$`0mw8lE44re*ay-w$)@TQd*clNAR(%5uPdB1zi z$VV@;e2am|gwU=bi3Ahc2-#RQ@Nj4ZR|M%yV{F)u1EjT!9~IyGxH=6o=bI!9tM4V9 zbj_g>xz2R!1`{swDfWX?J_xn2!x`6(1sn7`%cIC}oA8KLKFZ6G`1-{Mb%Gh{twcVN zq6VA;DyiF|ZA@EJ=2F1GleU)erF@D~9hw9hVXb^lDkhymJIUFHVbQAc(AH!-KEV8w zAjx)Vwy>U^Iw=20(<2uf(23nLxb!{&gdH4nxP_*xYF?fdBUT{!B>#)%AdnKLLoAd% zF)T0&Lw=ZSZHt59{(K>Bkvty(DpM`l82!)rC-3lEYU$}o8c0{qipkSGIh)_p6+1p# zvQ=^Jkc`a9Sh>;&={E<<*3Q65XH(xKGsk_s8o{X6xD&4X*)r4CLE#*tde3<2Ftz&J z-bRK2D)TE^O0lz+q_}32BSXH1giVjkV-(CZqm^v#z3`3d>Q)Jlz#WZ2C|%q+1=V7( zOL<5p{(S34Nr@ks)(@gEk0mIzP1K$3)Az#HKgrY=yXS2rUBJ+Y=+H1-R5Fa~QBCT! z;f*{V=ue75&_o`g?M=eV>fF=Ze+=&v4p)Cx6@aLwjlc>kTCyq1q@mr`ZM7q*a8^Ly z7rz}o$wn8ZUHU<+Y8&|JQlkt+Luh{UZ0GGW=pkwJ@fV_I9S-k7!Cuo$&2Vpl9RZKd zRQCZ-s|f59qfG4gNx(e7C8Y721+6zf4~s=w7U|a_o6;>swO!S`4CNDZwO@EKZpwjQ z@Pb_6ThX|78nr(WG{ROYB;F7^oFX=zE~dK9y4#dXex!BgnaRaZU$J?%%%?&@hbFD_ z%Ej3Yq2$%}j60QKxp?1@dHrs(8ZPvf(sVTU+E_+p@nQTY&2sr@D^;-;ho|sPO(8yoxcfqEqX?w-F68l>x{*l95$+F#fzj1+VJ-K+ktL;m{t$ zn*%I&+651%T{a&pFy@uVK)CaMp}j?{^FkcEfLYv<4xTgo(Wqm$#Om052eiCYmD5DZ z&ijs8rrC14S&PxVisY*Kk%D6meU3**RHOwGs&qZsrpG0M*RMk9!HROcM%3-mu)-(XZb)E($w()#z-L!EMb*e%#1Z&iG(gpF+| zPXJUKk3eY3l_H->hMO+$C1jVgFKG1?m&zkX*b&7{SCJIYlb(0r-{B6Oe9N(5)5M=Uak}sB*b)ZU~ghv z(IG(iUu5B<3fH9T^vKy~ats%hi{$1Kr^pY|L96c7P4Ov5#}w|2zlD{iskUo=IVpM& z5&@Ix^_sV=wO8TrX-WhxY#pk%*a8z;q0z?Y<$dMxBn;Zozj{YZV2o7z&>-DtLB`*fMufc%%(P`up2-<26ztjiYl_%skr?=WwAIm-DJTPl3SZ?3yXxi-;#GI?^qq0Vz>4 z17s=BFD^xg9QS3XB!9=mS(}0@iPiJn9F_P{+q@xoiB?Pdx_epH5dJ=0UgN)10zR@>e3E?b9{{ zu=7O-DJXpk$DfkL>3b_qCwqJZ(UJ*8MzM^gggLS^N`54;Yct-#~H$Opm6;`8YGxoQ}nH}tDm6C{>AWzyOt zc*q%{(5GjR-L*c-SM-qC8rWtpJ}eyPLfs2(;`=O)&pfpP?+S}`2*d-mA)Gz(@Ft?R zt2G~BJg^gwVe2)myY~)kl+hL5HM6v*|CE5I0N*l$uUwYfeSNjeS z`)!3Mh4u&uQ#rhcI;Damwu(b;3wdYGeE#~QH2~Q}43<5R`+2?}n;|>zyo?cv{eTw- zriS0vVZYvMCV^{zOFyle9<$auzW9~f7(b#M^>`otrAN#T%&-+lM;i#CcGV|Kq`IIT zf;N?5q-`97b)<>Z5tBoK^NWxKcbHM5957zsdeFKAo1-weVs;pe$jiL8B7qK@+Se1& zXa+-)2$2@;Eb2y4lmv>Y)31$JA!c467rmo)o3P%2aapVL?BrhZdYJdl$-%C~;;j&o&8+sIuC5Hud||g|)0M~D+^e+JPOja>HqYSdkF2!= zgGe!}hQQ_+Gkdd(J=c=$`tfz|1&_XOo>|5>oW#%Vf*atEtQXbgyN&#ESLSPS$QOmq8~BiXU;z6*+xu=JQSQ+JU~{t_=sVL>ii(V-}H6M-2+xf>cp> zIMCfb4tePxIM{PVzTgVEX~XBfSH@ArgQ?rgVuj+KEw;e1sYH^vCBEZf@jht=o(vh0 zn~>wHx`X_i$*#mR0uKVRmx_9rR7y)Dk54veWKQB*0V(P+L<65F)^;aRpkKp|uzBQ# zo}#0DW&>}U>Y9$o;AA+UuF9WZo{;{aJKq%kvUXhy@=*89D=Ub?a*T7eU=t2h+ju^F zT_5)2dY8%7pe$0{d=*6%?4Gze7XqdRlwH+q2?g_SN?906dm++;hlki%IqQRNO@&Q% z!SKZIOzqvXZ3rpRV5U&ucY9@~&?Y0Necd9wZF3id>w>~;lKJf8M9mK061%TP^D8Kb zef?xC;PJJB%t}etmuBPK6ZAmAKR04Yp&^}d-hxC0@DY`!5%Sq1AU0k}@zaS<{_efl zXBtzKcG?TAhz9f?RcZV09+=C0U0L^`zEC%$(&r{GWIUWFL1Kp=f_aO?8DHW53I-`u z4V*tDLS-;4uBl^929^3*t!}ClMZqHi{2n<)AM5OlG$KK6{1ii(a#N**5Ev=Xup_*I zEX8BvB%cD69?VhC-nAo5&*$&7D^H~kO6|04QqmFHP9^o}rY89F+v6*7?T|%yH4v}_ zE7|Rc_i_q_AM$%n)CxcyESmRZrjxoq=Pt^|TMQqH9t&kO(dBN?7O_MO`NhuVg&e2`KMd?Bt{8q+~=86vNUk!`z}G?0+n9sB%)sDV^{OiS*9!yH7{@mmZ){U%dVb_5R?MpzGt|H7&>z1wlHDwoin!&tU!a z1pS$dTb84Jqm{4~VT0ck=J#;p?w26bGjL)w$3pSqz17UwhJQp&f<52e$)-SwkIoJw zl3+6_my0ke)>r#ck&~DB_0+Q~Vzkg@UHqpJX6b<>II!X;$L}{tsz%|S$N!8RZ3f;J|*8y zv-j+r-|k1;Y=AN`lLUfxzTlPCpSoT%X|6@lc?;IY1ayVOOgT^2PUUS?)o#U^i0_9i zTu0o-kv;+dSXi&KzyNDt1QPnyF)2_WG$5e-t!3@@=)yKWI$x^$+nv9bmT8PRmo~bD zTUb3gZZ0YLI@35=QnR}on^ZU%wOiL+*w_`uz&o<4W#t;GZfYG72->_;5iCFmzHkm8 z0sxSiz_J;Anjg)cZyn8SUCk)h%|rk-s~&!~t{r>w^`p5;&Wi+D79=|DR7aDT0%}$$ znXClJbk}rfKOa!P9H=m6P(q(aKK_8{y+`dCnBfFzgtyO?}e)*?u*m%?G=5O*z`2edwRd!QC4AjE(XI{AQK2_nUv53>yY}6 zXY1or!u*R;p2vY6(a9ttr!Wah^~>vqHMv#|;cYFG!>CPR>D$x7>7(4Vy0WcXIZ`{L zMdOi2Gu)UBX-RrtJW^m~;VGc4ww$%#wNmA?CnLF%QyG~(_IfAiAJDb83#6H<)E#XQ zuNPlD*h$;|@vFy<+50j@lULpkJNe-tbg#!CXGM}dThN0wY zd0vvwsyF$cYcB;lFx7re)zbU6b@2G|M z7#N0IF?1Tz^kwo`N`MlDJc%7H?5U1E970xI&R&U>=N~t!|BzT>?G{ zi2LohH00cJBGqih8UXLB-)vMXOm3E3*_x>%MGb6Y*y6F)mhTS!iL>*b#!5PiqhZVI z$~m()Do1J`!oH-CrLC+9)HTDH#iJkwaWSOy-Fjc6o?NPaY;+0=vs?I+Cm=_x2Z|CR1tz2#D!j>Ky_mvG8YTe#^)P^=aWIVm1W+!q?2PpDdy z!?>rDk1u3$O-du}p_t;`9-r~}ifx7sI7ctJyM|jq=E%Y+ZHXdcB zD^_NV)L~*WNzzaAmMIcvsT0)5a$murA&+jb$#ZTbm|7gO7-y_K@f>_1uX}=w2i-cq z3Pgw{kejSq7cPDurWz?n7QAO!Up7fOsNC)kOZ6%f0n7IE+-wRwcoT0G;tFO) z-D^=T48wu}uwoZAI&#b^nC--lEY|;+K+tdXLkEM^s;5z6fD1eq!>Mln*iy&K(k|_n z41HBF3y`~EyqV0J<~){HJ`eWDtFVWNBZG8ao-{tJXhE7?6wKn9IxDDEEZ>{D>*8Jd%etAphHkuB|@oH-*n(2lBVC9(vdED#>(+ zPWLRJ5*Ngw5`y@2p;3Pe_UJ>x(r>Nf7auUlUg8-s^P41)A=Q=dZCpA!A6hLDt+LA| z#*1MGMjyYYqYw){pTOjse_3HF?t+M)T&}IaG?+S%vc0mabYi&Onw27s-2Ub)D4cg! zv2j0;48?)7!zjwIEmYd9mTo6&9S)IGqO9jjw-v)dq*XUur=Nj_*7SNoq8MageL`!0 zvh=ahxC!Zp)kZZU0?{*yOkC1cD$Ycwrn!BkS6oW_jJcl4!AzQ4A*QX05lbN2!U4Fd z=-qF@_K4l1bn6V*o*T-okqm#pPB+? z{(?uujG%lulY0g%vS13?ZExpbCw;v|ZPVT!z-7_e`l*Z%Q}ihmEkjcw)QY*k5@?3z zgSF{yM+-+$;8+kBO9(v^)9~_Wh64SDZUE=kgiD%|+x$8vZb$D!$mAfnCLfV2pPBka zXsh$GcwRb!mARyeN5ckNa}F3e?TU=1Q5kc0lBQyCI8#`ON-V31H9%9|#x_cZEj~tG zAH2g0*bA=kBxYBc2!ebgIWLGFNJd8Rn9iJ;lFOm{NFZp346wiUsI0G;DPY={^i4cI zI@8<-nmOwDp32#z_uHhSC;IU_M3&tvexDsqgxF3h`}BkkEGDu!mx;D(`bC>Q4ahLH z&4+doE0`V5H80hmcXz>?vI+q*w&HWnTiQ#4-y~r|M7$m)BxS&Go6kv90$D00N-P3< zz4?s;&W$~kK64y%dKg*grOr|DLA{}Ltu%&o_i1DoDsfWT4zh+23WO)N;n2cKWIDmi zUbup8~!V0J%e5xsHP@-#daiW)*n9C+tON1&Rc~%Smt}T>mS- z?vjE;;;Zfhe{&Kz#E3o9Md^CLGSqueKlR4g?6Ad0d{W}dC@;3A&ex~wqAx^0=O+j8 zoSH?vieTcMugR+RL8b$fjsF5|>nv% zxEn^)8#(2^009s{*V&13z&H9 z=*@0}=T0=^)#^QZHrcEYR>9P=P#Zqx%0ZpZzE}04u)l#zd(QQw8PWQoedN2vehh{S zbg_5OM_Va2DOu)11^5`q*9J1I%fVlMa)DlWpWt-{B_+(zU#IJ&lz_?0pGne~AOl^; zDN_$LN%cyYbPfu@dz@t77=x}Gh-#|y`G`(vf%8`+8erGxC=cKT}~!RUv|^lX+J+VF^7FRJIUc*hvsNK$Y+Yr z=`FWwRA)%e9qe-$9`q;_)uzR3ww`gPN>&PI!A9s(sb}Xso%|H9RZ!zfm+0VSyccH+ z!K)XJRQMZjRyZO+;} z6#GxzQqxEQ{VY#pc%R3A9DSYV;(2jMiErqwYZM zTvm6f1&%lib=g>dzUEcF&^HkmAB?!3nf&FV%`$Nk#7C}L zgxtM7h-S1Omi*i>+54-v(JIqg>Qs8ss2T9EUAi#=E!HnONh1p%KTxh! z_o^5o|N2P;7Y{YgQ{>@=pD>_0YAqLy^#qgyCnmqA;4CiV%p5n_9-a<=x&XtMTA>0~ zfhmX`Hq#5mOPMxA{%T|-)*AEyAjfSv=}R4)-(V>*;d=l+7kj~rRf*Fj*fi?8@aC<8 zUFq_9HFaZ`*{g>PxSg7!JS{SkGcbNNwW$PWae-szqRcd*L+Xe$g#Wj~c{cr$J$g#||a$w_zoQDn}38gsA#hiNTz=exy zcJRYD#5Uxrr&WOn$J(nI+2boL5fAJx4Ij&cDxxvtKC3Bddzv=&DpI2-jkw64qgORN zc$m=nL3+khHT^M(vnTp7!3L%JRAUn-odw!^%RaNL=Nyy!yX+9nm_kU44x%7X=c$S& zY%7e`HA56^;uSA2O1_HM2n{Z$Lt+Yk?86qO;A!Kw4Y8k8^q(AT^;FV!psmj0DiAl( z7Wo#b>?Qu9`+@MMN!nFQk}1xx7$rwbLOe)A#V5ua@a4mvHR0|tG(2Mm zdQ!tsw~%b}t<$!DA`IpY>xEnx663d%D%!2xEpv}kPOx>VQ57w18LH3fvxvEZ6NJG| z3M+unT*e<;5YKrZ0!<7G>3LqNpoyl6K&`|$8+L+Lz+oL|6-I439VQiuy$)BndftMp z8m#Ee2SvW!;v+kt@%*FSGpJ1eWHiuc2+ixo^V&hGh6*I&vdI+B-&Henmq^IiscUY2 z!$?vj{IJb5QjZb!HA~n%P54RpWYMrRTCGl~H`_VAj7WulF;G)6Ed=rdCG~z zxs?L3y*5#mq+|(wzmfLQn#I2y)XUS-;RT zxKe2?d;DaKx=Hywz1Q>vfB~a#UP7n(G+YA*+Y?)Ca-f%GG~%2P>nF2>aI@Ly4y5nX zsinVFN8qb6(g_#}_@c3TP&_0ywbf0t%zTBtEJU{5Z(O_?;J&pr1jF_~`6*aT4>zFNJ%Y8>&WmbBO%?!Un`jw`rG}8sB%ohe6 zbBev?3Gr@gmI&03t)mlNf*Ok<|8Nj#;T2^KY=TApTsc$5@sZ*4i-7Q_+>Zk1#+_#} z^HERFrc#S8-!*t!&f1uP#RiT8N-f?lvJ9cGFk5nz)u?FE@Ml(i%1=EYb01v`KS;q&H)QEwZ|;4l-{Y0H_h7?d#(eWX zjsKRi<`y2Dlg#PQy7^3|_o1t7p*E?=Cc*RWK4hlY4mcQQCONBp5_(bE%lJBSB{|lC zx=o==x?WSWRJJS8py0i(0Joe<@fqF`m;6thPkWMwFNh3mJ3J%`%_Bd^usic|O36xC zWUmCdlyVuO`0&xIiQ3T*K;Tc2S@<7#w8ZbfA#b0qf!}1*j}r!M?jqr!RUzcYJEsFD znO#>H6gr2T;V6MJc>HzgQ`r^KVIX}?+>*GU@PMMc()cCHr@~kaX>6+)LQ#_opFBk! z`CMpGYdf3?F8yh-JT3Pli<~sLJ>oBn>WcOgZ=-h%C#9B1!E-b=Uc8nJL-qVDp``D2 zWg6{sNa{X2-Oc|jmZI|=4Y{?}6P%Hel5@@ogSH}rCmnq_V=_&ZxI_`VVr}Un9k^=)>b%#rc`Pr6D!se2|f9-X&6=t5!Sl0V+;$Re8Au!aFETzne2n z1q6BMfq<&}ER4R)ZVCjQ;XDJuYnIQ|XiLM!s=}oK;m&>Q)TOve#(n?B#LBVFS_f zq})=lXaLeyI0b+YnDZGx;5H0m^!!jH6565`;nIu&G8J%MDbwE?WP z!nHFz%Y)7hjmZ=9Z?aCnKspZtE&u@Il~OYRU~`TD6x2KbTL>D`7is52yBL9$RG?P1 zuhZSR?v&1yWA@B?AZ4a;%7$*-eu~eFzPECEcejKhu@W!ubDh;dS9jf;izoCY3qfUr zwI|?#@o%(g2>^&Z(zv?-0dRns$y^2^oX7UprlYNyt*V))9(mfa{dljo+^4>b*OXX| z^-~H@cIZe6LVduVdQ)8@Ed~uO2`vPLiE@xn8Um#uO6CpXV+TU(4FDzDrvVM|0i<|W zF}-qIJPpOx1vX|r=Lan? zWrk@FJ8A{nnrR1hN4_FCgod}IN~(tGYwSL$D&)Ym$2NgSYVIj2!2$o`xy@=GP%-7j zh5SYn%dfUJn+R6>EKZcx#ib#Q}#owtZNV&s)&e&)QlB_KmssY0AFq7Dlh;GkuRPVhCz^b)q3{DRlE8|=TZPo zjln9~$nKn}%npe#$-SGGq< zuA1#U)^I;K$nc~9=wgq=WVCWvmDju>KJc|-e=?i-{q}+ zD1<_NO-EnM4Z4oGmrXaq7nYJB{SdgV+kM*b*87Z9)u;in_|j{tqqK=w&Yf31F3RhW|d`J?28 zOzzY-EKi?fMX2~3`M`a~8tFH7hpGEEckig`$ut6x{4$CjmxTEYLz!c|rS`yQlM!OkS!6 z&%Jn77(OTL^6+ElHr=L9^SGs%!Je4&hbPIXnYpF!3rD7|?A`3b#orbzN1Mn|MoHBK zmy|%Rmwkyt3vhW@Gbf`MDjIzZ!x#Q^IY75krD!(x6H2z!YaMT9+bAa~Hqgp}MFEu}*)km1lIMv5^2`;0Ce`;wbZ+u*0)9?M@DS6da ziCz^2)#-|G#o@8N@|2gg^0fAptaG?I32}D?yUmhaw^b(y@lyqsD~aVHo(BEUZ^i=G z-$0`d=?p#@8+fu-dM4{jdA^t-EY5a<g3?d=X5U1J@mfoh>gdfGr?3Wv7)4k*m^w$YcgyNw*4$~V*)k)dyrF@Af1FvkaL zXdj}n>MO(=qk^{%xe%e~v%yV$em;1(tjBFtFwY{3s3KnlfmoHTB5mh|wA*Cxa3u@IbHZ9TLnZcjP1#j%N|pQpwTVS ziJS|JT;-W#!qsuaXBZUf0%J@tcbEtK7&%X{mp9-T1sFw=srhn=xbWsUgr?rr*G*J+ zJ+ICq8#Le0)HC6H9aLuSiDbt->LD0Lo=r*A!P%Y#yXy~SogvVAYW$KBTp12+n&<4#;QY@G@*kGtLj_WBe`8Z(W&F@~ z{zWu2Ys?PTq5VKFC?c$8dU-#66kE~rTzA2m0!xI;e_r;PzLk1hcqj7X3FC0wl}PS% zm;62UruR`239S1~AbJoCzO1m1OPA_f4W}}{Olw?J74}y?k>3517c&|gXUV|zFumJZ z_}$U7lIDlcdE<*DyF>3zA*>jv@|3dW(e2D&wCs2;>@-q30r$ze_20wn_%TV0-wxZ~pfqPPKfwjl{ zNa?KjDx3l@1`|?gd+eMRS3Wf)2K$k7?Pdw@n~bp#+(Rrk^$V!{N4s7xx3@t z93hkt&y0gNG3f_)eLq0vFN+AdiAHUp@S?DNtd>Z9)s-!H2+b79fdpwkWz|1=$g+s7 z=Lm4FU|y3|0>h2FOz+Y{;n?LJ+khC+03K#5B&lCoP&I#+wAH5MXX);nR!@=v^% zgL;ny(*`YTtm=CGcfM9MuNXY$bUxZRQf3fQ<+0x4Cz_<9aTwD9y&6!RAjGdk%U>e3 z!7|1p1AE9NTMA2Z>X2crMo8O0@BZo2uqmh}+vv6)B6>H=Qq3E@d6`G98%U808lLsRy{2R!zBIcX3N$|2((bsfL1;gNMBtc`9~`L7~ceO(JSh9udrT(pD}Y z4d5R;@;j~vJF8mMu!rSDzf?0+8N?cWcG8=j{HamY-8I`jMPAIY1-+C+NtUi!$=!UPGqz1PuMvpU0TOsKk2{4{h%=R}_0AmL5> z$!9OLQ*@D15|?0T@Dr1tE^=Dc{Nrc;rRLEw6L6XRg%dSq+gh=+OT)B0j9EGelj z2gNN~OnwmRrAzP@t%)y{fCme-oY;YgDIzlWfD!;3CarFr6x3Z`ueYeG>3Xn$`@Hgz z=LI0YH#YiwD{NfI?h7Ujl-E%*L;_-J5uOGg?W~`fRRF>wE*(rJhHKv5v!P|1^F}U} zbYHFp6C7Y26BpSmY0Xg=dqIMJ)hzKUqR=zg1Uw~-#--Jg;$;ap!4G1rsmgMxXAUL~ zQYtEqBcjmH#>%e$RRsS|25bZX4FK>-2Z@3A09?+^#EwR7HG!!B8UTP%M5J+^!bAwC zGw-8$W?vd_SW5If1WFAlwejJZz=Flhu?%2K`7)ly>v21(gEhbh;yOXYz>&;D6vsZ- z%G7jkOolgZdknpW0eA|J<~Aw&Yz@E`iKIu_Yw@KF)_FK4Q^L2%r&?ar7Lec_^wq&v z$jDUhTAOVSkJ7_Vn7I(B^P4gj7k}A0v?*Jk(ovmpuh)EpQ&O>MPP^zvXilA0M054& z@gU8|IC@PLuoXh5XZTA_pNh5Q7oM}~KYNA?lL}e5As@n41U*Ki_CSS$1;LpJgom%s zNiOA+Eb#5(stw%k96dVXX;55i$bOH}ljcmK)`_o0^@omM@LbwqJFJ)srzOPk%$dyQ za2MS_wUI0`7WjE<%nK357caqjyo|tpFhlt4qC82+5h&IFQFrz!X3r-~^XB(^0jw|9}G}I;-J!=Vj zJqEkBF|Y1JFznYMh`O^J@_r5@%R=Iy=t;v?HqDgVn~;wzJ0O3s(;4oAGMh zztEo;!|q*-ja#eL8G$qf1Rbtb7MbNQR|`s#Aq1r<*FhtD!>G}mHO_(bmcOjA*465Tl3ZL1<01_5IS)wR)nuQ<$%i^iDATzYrJ>9OyUM8TW(UB-u z?5`l!>H>h{Sj{LW+zD+N<8KCLYtgdhnF0-2;F?92XbG?8ULNwR!Dkpsp0OHteloGm z=6%2-I%!6oDVZ3g@6As@p+q@@yM=D(;qy_cBB@#QM20e`#}yXwVMgv?!ROMJ$6bR> z9V+oJELlepgL?U!H!~cctUf0&qFhHJZ%P0;Z0qskCvxmtZ^Wx_F0L>Zeoq!ZOB5&NuCD8s&p+ouk*dav|C-G8zq0`>m>E zQ6PG3U#f(jtoA^pB)|^_P)rC5@D#ZIGO87TnZZ>Ka7hLbUOR@Po44E!K#*m~IJ)Y+ zOxP923V}=oJa4H#NL4?7ADDG6X_!)~UiADCYKbTm0p*njZV%Mo&*TP(gwcvY!9*O4{sWSi&A$A`5#I29xqJQ6^D-#(tZRa=p+!n! z{)#4nF|z)AjSV^k2BlILn{5e+R-wDLm=YuL(?{eK4|tb44&b2GN9&PZGd;yiU%soUJpEO=nmJ=7)0-tTH6;_3ja!or z{S#Y9&V8SayCcf%Dx3#^-*!u^s-EpeCT%CGJ*45^HSB}XYy+{e1&s$M^a0pi|EPwl zqmUKQB))yx>{5H&G=(=-Sn}K%kIY5A#%fB3M>W}0Q)LW0Q$&{ZN;^;vg-Fp?(OcyI z0ark%zZSj%6cTVa@Hq|~zySdcoWqCt7@rLPBmI*V8Il5N7_ua>lW55di$@ca3GNh< zZc}9R$v$dRm5szKF2&`C)f|xAT}H8(lV)vDVEZkqoz|L z(ivRGV%%7EcI-?*#IPB&C9#{u%_mL$_(zdS^ZrE>oh;q(vW|m)eeak2h>4ccGUPI| zs`!k#$tt}3%$%8kOxA{DjqXitm^8zP+hPgAYTmiNa?Iq(Q)65kk9WZ5CQW#3sqnhyu-025`t}*CP zyYZVk9kK(FYaX(yRjse6E)$F2vfY2}GAznjX!qRz)DRZlx-GCAQ^qr`8D6@sl?DEI z%BN24x8ice67z*w6}!~$F(Ze7OJd=@U=TGz#iC7d0tCxYX}|@c@;XZ%1VUzD_FMUqWC5Rg4HL(5{lz# z@cOk?8RN&lFP~)a%273(-baQWyS6$Rc1s-RiS_8NTOG=&wwviFt6}1CFvU4Cq|n1# z=4DPEnUj{v()#3a+^mT4 zeZmcLn7d}Yz(vt7LhMrmmxFHS?3hTTfn++U4 zBf*9TF%4=%hto~p#TRQV;d`IO9EK1L3m z{J<0+B}r!*FCKnw051q(4=T&yq084fLbX5#al*=aj15sPO*1M%|Xvor8?;swt$avlw^{#mX1Yq6M2*6@Dt# z=h51|W}clgxU?92u_KeiMArOK;F#?>waDM<9;u#`C|!FH+`f-84_z)*aRi-O>gQ_y zFRYjXEP`*I%?QtmdfKpQpN^{n&N~*|ZDGUp5@0m7cx|6sYB|&N?=*%1X<*4N?b0FX zRCNNw^oI6y^uQouha~he?O)V~8KLB7y9$N?A$JWgP9SC}XoOi;O}U%Y!l_o@29i&Q z6}XwOip+{^hxAu?-`~P}&5-u~GsX<_U4=^eJsOePqX!bUNjFCKUf+;s8;#ICyunE; za9e{d8fwPBf8G0|Lp0D9vFoSP6QDqkJd?ln2J{Ns2>SgfYF6!Sfs4n8kjjQ?-e?&# zJ#1P}N|Pn)nt>q+Pn`gOsO9*T?2!HPAgJqvj2S}|g2?Mosc&m@l{A)o-`Y)lHeoS0 ziZrArO(K^cS?lt$kf*)rYm0ToAq+or=z7axIwvDIY@ja9#I2hT(i^#k<)NgH?!e^J zkgMb8HMi%Io`W8souPy(2hQ7Co5r|FkA!YT+5aUmvzBY*eiK@A5qJYeJ8@acW{&R~ zmp|>%!EOiR9-|?S1_u)uFASLNQ{ig!y5IL2&+1|L%|XwUP(k3hJE-0v5$F44VP!(aAVECl4(O-aMO1M@Q<0kGD&`YjPFN+YRcak zJ*+6+{b6PL&nUI!*Mqjena*M_G32<74x5IN3YdLm za9tIT;Bi#BbCqFTN4=p!Vn<}y3=Gs^?H30>lwvcXNM6@xJEbJKsj0o?EMx>I9ilif z%IFykN<2*nHPk>L+Z}Prmpl22a$=17I%AUkA0BQHlE}t+*f+VekYDNBe#rU+d4lHv zkhhcV?i;v*DHGVxJv(vy0R#)`@v0|PXPN-6MS~!?tgMaT1+gTUu!U_yV}tL#FArw0 z_3aPVw5s|(=x}aIRjC$rD3!#E%^20u0bqV5Y7Nxl&H1xby~HvdI_a@?SebKtifvcP zerl5SjqZrJgFreo#tiJxp153Hr~~3V=FFImkIcXGJFM;xIy~_ayx_>jKJ`~Na|Uw| z2o(dd6ZSC|!oAib1hIi$k8a_5+F-)TcUUk66^=AgIZkQ1H9rSg?aASYGkbP)vNo?L z2L=75+t{2))Zj)Vy(l4cgGk7XVY`#x1^jq~StjN>pVZ~hGK(*B@Bu&b1EC2CtDAo= z-YV4~%_25?IHq-4h`aUpswqeOiG#hXbniaaxjDDjk-;betlThW1v3(E-n?Q3n79=N zfL95tbmERnp?3Rf&CN%D9F#{iauErzym}VC&agD_(1~g!i!#G+F@6PGt8~NWI;$m< zz2PxK$nF<@Rp}hq*1}+@@4uwTk|0D^NJY^TFci^xn!}_(qbZy9priKar5njuBt!rJ zy8+Dz2z|m(NITDC8}Z%a`P7_`yk$b7JYS@2tRP(1PY#pAdqa7{pHL9wT;2Jv9)Z!} z!2Ii@T7rN-!PGiM^u@2x{Z|jh! ziV9DJ{H~$9>cOQHc;AURg_rym0sjTF9UibtXVcUgButGt)K267*GoRtm@!YZm9>Kv z5GqRQGL}vR)(h(=<&2U(5HSTf9ri?sfeydHjs)>w7e7ZNy_CynV3bUv8AJep%>gw2 z2zF2@zj+AS^`J{ipyEFmkAlC25cNU-L&gIa000mN007`S000000002WmZD!~z9bmK zgt%9jm_FZ0XteP+xEQ*`GK9lHI_(U>Z=ith9S4+_sBIWC42Xbxg! zWw|8$sIBFgZlSb}dV?i8XUvdW#buw1Xzr~F8ll>5HuMyjSTnqSZnE!$_Bq%Xd zz2Q`-gCeAL-V}sBm+g(Et)Uc`!($t5=~6h2B;q7_-%^ZCR=CYq`-x70 z*^}|ojXCs*U{B_ap#PS+>_+mxM2mjyccCV!8d85?-to<+wft*G(Z5|}o(ar#2sNgY zyvAT&HQ1x*MPLL<10xRlmT$$Rfl57W0k+4Uk%RdSW$(<8U^2&)!h(f=r=9i%>|G*n z9qqr5m7l${b9AKJLbq|J>oI2fbJgp9y$ zM`A~qC1{Ib{u@mUfd>F1!^4kf1{fV0OwNI7)rI9g__EmF`(SH@Gm3tdte}8N*5S#g z7^{QP=Mlic&z53D@xforIEkI8B8!W@n9UDsO4GVw#IzSl<45%(U5Bt&p5?^Yw}}wA zDRZ{!QF=@X8%zn&=QQis(-Hb@<+E;hnZcueXCo5yN zRq8)V-X@c~R$(^lDmQ*k)P#Mh08zpI44TO6W|Tjc@bL}1s*T~i?bS$oK%BEdxb^}> zKcfsk;4xIduS>~>*3Ff~FszPklu|#CND_)o6*>E&Hfb4=sVcH$WxJicKH*o)1MJoA z(jt9PMJ$(`Hk_(=Nc9jg$Trft>{j-4EJ)_ik97D3kOnI8VI4y4ikSdn7$Ud7Rf>ri ztfJR|N44KTD~3u+3H{zlCKhoNsbZe+--p|Yo(weMFeRP*cUBV%SXrbkLo&Lw*w_V+ zM|6 zpxuWN%iqurQM1Qf-7lR^1gpyG8ffY2b$#A~ub8($t7*WcW}+&|mvA@xLDjKZXt^sl zO?hR!6G>z4*lc3{dQoDXbqpkOUaOtQ47{UI~S3-4QW(eujpBg7*qqdK~=t@fAOht7nA_B697m-833H1 z3IG6L0NQv4DgYNK04UZp000mW0ssI2G$UX&004b(yW91;rQ>zH7N^zHVfxsKy_0eZ9T+YPU47EM+j3*hUeEW{QO|0|Wt~K@eJc z<*_y(Bmlr4YE=-3AQpcNm;eC)8JV!60{~F~rzVZE*(Jp!5=GBQSn){`H0s3KPZL{8 z0e9UTqmWI#_d;%M+wN{w2Hb4-J6$%m)V?_!Ms00+a!T9UDSmli*A}gOe6%XAR=!Tb z9YsMoGP%P6D3D0p9I|PWKsW#ZW(3S=3;^d1`JQg?+wNVvnJu=q5M8&L?q0jw?RVF% zEn5`Ux9@S(Q8JK#Ig&^SVkt2)QGf^t5{*I;0VId{5#a~;AL2of=?8#4 zeSelr1Oq$&B?}V;j}danNe@Vc0rk&7EQR`n6l9JI`ox8fISPg_dP<~#DoSBwVyQWw zh9;{^LWh(WDNSsU|bTF+8NNvq5}^elRTwTX`PMHVTdHk zdz|d+X;g&Fb~GtDRn;miNLgRlmAE*5`urz(`$C&vChH}UjgkvtktxWPkI= zXa4!G@gkR|7iXK!iEfXXm7x%x)nd!-_4jkvnMQo(1m1hPlqyURcBTQbrXb$Rm*E_RSbHve$x8Hc1dK64AxdG z5+~@w#BdUzMuC+buoF7^+v&dqk+@oEGGFS{_ya?KpY(kCH6`#W$HYBGPE@+sDsDO& zB?vM#Kun^1bak(%vxVo39TCzl(=&NPq_7#!)HKG<>e!b$TTf1qOPY)kyIQtkiC3Il zsMHhES@H)uryGnO;OapY<8F0hW2n%GwVu;Xk}Qg28ppLZQj8BOQ(E0d$r zR&*WvCS`{);FiUY-3NtnY8%hTGdc98DXLD(F}*CC^wy#6ElB~#s07RuolH^bICR7SrQk_<$^js*X;hw0m z&3toUHC)Kg+6y+Q>5r@v6LK2Oib}F3nDsfYgNSlhP7ECJRclRMnORl>oAe z)tAnxxuMiycRCV~WHiI7P(Cfj{SmYk7sDeC=eDY{|H;?Bg(N5|?t<+cW6u}Hd1t!00z zZ|oQ=aF)3g#&;za=IJjT{B%vzg4dqN#+TyhtvO=i4VAwy&y}2s8{(yCk`}?ROMW0P z@cH?ZBhfd~)Fc~zrBAA#8(Yl%wXSTq?IWVfU9OQ1ZUHoHGSY73+>#y;pPYj)XnPJD zjrWQ)Kj5|zCh!!hAprcSe>OY;qG`}AI@y{)X%&#I7=jIPCuW3zV6|g>{}cLXgLI;$ z_HR0YHCNNbW*tlPiPll*RBAM41gsyZTPPqq;3P}^08SfWAq*Afoea(wGBem=@P`S^ z&brVMB2*KI_X7)yZ)DH*ogzdk;Ie>*o209q)!y+!@ zl5Z%1LycpA9zRVL9YL)tb|(ZI_Op>J(o6Yg^)3b8_5C}%tKAR&0pdf-VqO)XcO>oX zsetukIqivRnSoJMvKjUV1T3wsW62jI9og_$-zWqeF0;l*YT;JT02sTRer3}#TzSWI zK|#aBrxH3RVgQf8;h(^_L}fRM=VlpN$HihLUf-}XIOp>#?sLw7$vm*Nq~9O&0id1g4gLCHu{J-cz4vZxjxXaxs2Uu`j6TTT#(ypN;VDmG7RAq~vT9 zdk*4?>sakGUR}Y~tmHFDhQ(h*s{$L}j?g=2nk0=PbYUC#1wZlee-q3qYwOBBC~=qs zRhk~N_&7w7u#<$gIwK;twpvAh`|+Qg^0Wu9hTTb&Y>*D8^yml^FcYH1yDc&JzGWF@E?1g_>i?As1M(v}E{BwK)NZu^v&GP}axG4~>mgZ|#qXOY!DLf>o}y%TI*mvj zs;;gRlp(SYGllv|ZTNC_vr!2*Msvoy zomLUsPRh0B*t?HF)3oEs!@}L@a=Hf0($2?Qml?oi&X(y!?c^m2#5@lkjGLKP8vl>+ ziGyA=vs>Ed`{MhqXWR5$(2`k@t(>Zy@`6&1aP4~6kY`DS?Wk`etBTCco!%!+(@L_2 z;dA$~u$y)vvlrgmycfH2n-+p*9Pb$o@oK6-FI^rxt*)(ySZ|Tk3YY3k6Ipw*tzicf z1NJsxDr_~`{_j`13boWQCqf|wum>_|OT&+#=haCj?hX-Jb>n+w;+RSyG$+LqV6lXc zW77o3+rMCNeiFIOvDcK>LTB$~+^I4L8`9>-{O}rpn%L{%XZZ30y8uze6D)jEH;}8) zNWS?ZaR3KU0WG@Xbl4NzAAL{6V~0b6kV84-Lk^hl$Xd(z=N5>CFqc8Lt@;61X20zA z24)yh<=Z!9z_bjuZ&9Txm+IA*`kw*=K2UvtxBWL>*wvAE-^>B$#}Q(}y!;xJ6an>zjQ9w6Kc?kx1%acIvUYc%Hi`g-Aw_Zh@$*oG#Si#nM9Z!5 z)u`(o1`{|D)DL-?02R?htoVb!op^hB`9bWH0F48Rn)0xp6#>LYFx9AlaayNX`2yTr zCd+3^MZo#-<97o14=dA(D%e~TInzfFZz4RAgc{Y$6UU3RO;{|nA_DjiE?LQjP_)34 zI!)gs*N=Q8ak?8his_vWgBuMUD%pU=Rh~^PoSi?}?(%z%3Fw`gNZ0p&sw$o5ojzhF zl-q`;YlvyAtK>hUfs`wXMzm>luSyVC5=nJkQuYy9&w~*IJIz_|D1v!%3NtVAy1Ol=q6ZJGg0@pup$^2y>3pxN!&%HM!S@Av^%pyuXkW)HvvT4vRzFm2T4iPT{07haIG2e)}F`r z^!q&hKXsUw)GLc)LS8|!zRn$o2(yv1n65m3v|O~zemXsWBR3N~Ao=r+3;+*GO!a4) z-n-mx$Zpl~Yhj15K1@d=RlRN(6i5^exSxq@zVdWTr1ZRUVI+BHBQ@73 zwl*MNp~vX3X(g1bTw=0!3@#{X2A;I#tueri0V3m?=$@LJVLykmZ?*<~ z5^!i8Hig}EakkB{3E6;B93F9EA~v5!-*(wkKM+3PLiJ6yJU`c=YvF9;{pP||W~5A} zX4j&d@O;YmJ2&5^UP5(omeC%%fw#_y=G5*K=ZF&B&w1ftdr z-Eg1%j{uvT`4M5;v-XPP2fagdagJ`0PB91Jo*}~;SiAB!#C`z9J24;b%ZJ>2ju(mQ zS$Kyi1@Zcan&B^QWLGIBGJk){k!oxgh>2AWmHR*=P!a3Ss0lFdjy^ljI?ZVB7e>E1 zQCXh#c9V?g2V~H$-W?eKfLbcocnWQL(2g}A^l5_YkaFQUZP4j#=p;*#xxF7qi}Yc3 z3kHet;94zG7Aj^<;v-RK88Ntcw?Bl20*-?qwjnxpypnTU zZw<-<*Rv^%GzkQ%p8MiSN?7x#9mD?7U%QWV>&!*?AQ9J(=@*SLkKG{=2n`tF-ClBK zgBsGXoELbF4$8wUfGgo7SfF0|qsZ}-7d&4Ws~?f%Tub>-qz})}K;x#O(oW6whaU~K^UOE@Q#fs;?xy=WHR2*%j zW?p8kN*7Ai>|(0hd)5wi%N4#UrUPrOmbb2Wtyv%MYc;%41?1CmzHj4%hLFjKW231V zT}Vucl82SYEhetcW319nkYGDyjM;kTrf-=wU-x0mlQUxio-rAWMvRz#9#j2{>hMhQ zV)b`S+cQ^-XM!~jwCHRQ-J}gk#;b7Ce$S-tEMvvnRq3FZ?OwbaFF%t)I^6-MJb#Mu z-Gw`reLcy9pH26Y^-e7WrL%x+>ADH1rFwAZ73c>ltiNmacUCay7>M+ShiD{ikwSqA z*x6FjQWX;O2v=T+_Cf{|8tH~lvu#o_Sp%Ih8-2idj8x0kW2X?>9@1}*lbnks9()m+ zXQ2ft8sAb~luEe9O9*Am_#kT?0{SA63uH!)GWI0{=AsMXPv+Q0XT&}l0B&TOjkE@f z>3teI+f1FTF6mMsCp)fa#9tHP)9KBb(Ef} zg`!k3>U5)+nNmDzo83I>(BJl>fbH^8C6<2pq6R{V4uz9=DXf8|Iz_^Yn7>NhH9Ne~2#g!wX(}&&ShDMNSzj+})qfoNb2E8G`#eHKbXMdjl4;!sh&F!e`Kf{{Jyy-FiT6bTr4qb^Xb zLBZXksuZ;D2D?;~Tu_Q=YzaZpl68=5T1C5=aiGuI6=hM-fn4*FXh$q)poU>w?%u0I zS+R#`reTdEZneqmlUDLMlhEg7?*J#FN;@7R+IgR4)DWR-#~eTSc|=%~ZY@X9cS(*D zj+HrpUGLxsy(_Ffc~8_3*#%W#%ZZX}~lBb`HJ^yn;DC$XOq-8k6Y#<4sXHr1xv=5J)$A~^-?%3iH{Ba+T`4bts z!`#NiYg#h#x$m-Ytoeta{~=G$xBTSm<<#Nxi`?KqPjcKB7Y~#VftkN~FyR!~oSc`! z@WNhP87EWxuHT;FulUV*A@luX|7FV!`S6c732SfcH@x>RWVw8k7{~Q{r~PE>xN>3t zi-xcLgMReh?;QQ(8J9fzCtv#mv;Oh&%YI{|94;}*({DpI_ z!InWtqTkOwinlQ4kKB9bWBlg#r+#qbW_*wXFy`N!dAgzCXFp5Yl>4VY*)aci-0IIf zN*#U|3;jCw_C8-nxC(!i+vvCyKjhl<_!|qqzJmO44@Au8-)lS=STJV1_ES>T6Pf3O za^~;27huAv*8LR|d6jX%XCHxz4E_zQ|MJ4$U$F3t0DgmC{p{aE?=|xfK2Y-S|2XYe z+3$f*>oL4<{%w|L^TVJgFy2mF;}uPw`_G=&0}eX(UJvu1)_wi~^ZF=pMP}I)A6e+h zCGG?>bUE9fa%g{uFPvkT!h9&Zlt4ab#F=5x%PcW+1hI_d#l#A+S%ml*2Rn4Q*C66i<@s`M-~w; zUeb;g6Fztn4`7A>4DbdNK!AQB0HFW?AreHID*)>~d;Ryi>-~P#EZfVLle^YtyRlbF zH?o^G6Ag0>5D~;P_#l2n{4n*=0*D9ukL2N$a0edlqkS3QL#1ts&G??TnpxuPH8dX9 zcrZ8~drDem0s?3sY-qcy7bNzI^bQ=c&hECn%?|NOT6L<4w{>vL-S%hmUAElq1-Fds z6>vryb=&yjX+QYrt7?HkmMm?{!>%`CJ|k9DcAPJ`!tSv6I&MVn0H>@|D4Uv#JY z8*`8KF>z)G&fphm_nKT+2@kkR(=|dX?lqu%M22s$(9Vs1RmhL$pyu@XKp*_Ujicm+ z-nh~uopLuZ@(g~b1RE1J8ybk48hJMSYzRLlx4iNY_%#r0NZ7y55H~gQZ1~s^{YW># z@(}nn5Nu4?2#XnRYvkDQupv8=>ydWMH)Nz8&DBXnDJLVSoF`Cd5vLFojG(`NAt*sj zixP6iIEA2y1cf0e3PDi_z>_SJ@5-4QaaKv#$Q>f~`A32gG)KroPSS{$XpBxFC?dp` ze~eBcQ5^v?qeR0|QGObNnjPJIvmataG3&IP(v6fXE8jy#mPAbw5|PA3fk!J5QJU!_ zWU2FH3XS3vf+7$Ug`h(OO%x&krZeHSye2+Pk9nfm5-~Dcl_e`98M#PS*^@mIKO&6C zITA3U)|oT&60`Z_@e%!PN$xhT9FdjJY!QrXlcAa0Gdyyiwl3Z+JIM8?BAmhVJ~rQx1Ux z;NjKAwUDl4rQkWwJgpRdKXPdhxrsG9uJvM=>b;v#Hj9&{+aBPNi+1)+-!7tTc{xTt zQ~z(W>r@qQL9{ir9^LVbfIEf0#-Y8%E_s3%IpPiug|%)s7xJ%{zCricCl7hZ8O%Sw zJHIiT@yR}T(wVCSHtIdw#9qxD#yqa)v54(1qQ>|IS6s1p(K~8n_-*PWRR@+S*ryOP{mGNy#tyW;l-o$J8stskU@W4Nu->B|dqqi@-JG=2~UAxU+ zX!>(6gI*iog6U=pJGs~Kd-|T0#Icv~{rj^jyMFZ<@BWzDn&O%}>Dk)}wcz3QuWr$& z@{5MF1>br^0`nSvhm6A0qrf4CQ+xS;`45K39+7%7|2EMP4hydxhoK%)NP^QTq4%9n z28;gc*~H#VCoyQ_51-h-am9jwtQ_l@Yyi>eI-liLIbD2shD2xt+OhdwAiLza3UMY0 z*Tilf9y7Mp!I9hS^zq0ScBP3{jnRs?i0-uc>k#C@r5B%f6FHC(!Htn$?@2`JKR}+l zZH>mUjkmRz%6t&LoE$THSupAi-Y=o#8hf}^kqM#k)f(&STMm95ssznhPseCI~sma(`Ob_4qeJD8FLc%?Th)~&F63%Zyr z(j-DI8|8jn>XkkXBUBUcI&O>k(lJOM^njOkUje_+JFPUGerC!JwXF}8O|ISQ#B&mz z$GQyLI`p{^s@HWI{XDNGw4ScaJ5f6*i{3Qq9nf&kp~@1M+k>tghk8(e6qh2bD&~L| z^qsHVqzNxhsV`^*sK{CYQZnqsWdn24IvfUdK^LIHd8c&LgRp3PN9yQ|kPq{@oG#PP zeVJT4gQJI)>N*vC+vb2yV@_Ij8xo6pTJty@xd=T;Bp;OSN`_A}hwVh7q25q$9LQwU zW?G*6C5tcNw9-6ulZj|N7I#P(p-=)`a)RaN(xED#A!&`(jsSOOFht^fC5;5}?Npsj z=PU23F8YLqvml=4Zf z^H2T`oNY6Tm{QLs`9WjnK>MlQ^@hxtlB;*3=LDswuPR_-u_By}*PS~9I|wfaSN?6+ zEPVH~X$$A^1O6#JL}zpOBklhTOX4s?I}_^NF$eqebdu40QJV~$@WG3=RX&U#evmsm zeo#NOF00dESloaf4MjppeWFl{nSt_C;wiJ8>lA}vrcq~h-f9{m;_Y{nq>V>`n67y{ z(;Zf$Cv<7hbtm&3VbjE6-)ZrcIUX!ubb2Hk8ozh28f4S}y;;m2#pstnc2IiK>KscM zrKJ9vOlykS(C6beOPq~shok+G;-zP+X36W;-QA8pN?#$ad|ytE-;9YTc?`%4KOPUD;yn z-GN{R>!JabKV{P2(4(fqgO@W)u&KD_=tGwE@dLN-n-JVb)c_<#l0s~j=pyRg6Er$- zLqxf~Ysq8>wX<|Hxsl@`o*aNcnH?Ha$xdjvoH_?sGS^?aq%B z`W_@$oyav-T|rs`QQ`Jsv(-wNWQ9Sc_J^37oi%?NC?-f0&nrl;Q1?e^^DbNXOp0hdEs9?45`8l-X0%C{5Zs zR~RQI?kvPrxjs@${Im;g>7is{19b*U8^YlN=8Gr_B9GSe$}ePshf`!b zzR2vGtM;~KG2vm4I{<`*pqKD-;oaU}*L;ep1$*~PwhK^E+BvMV*d@-v?pRZVGDu`) zA)W`DVj%Ggh3?!>Wz8r+wYevrY86_zZ&%Y-?`$=2M}}g(%qRBI?ryAZu^+1IUM=S{ zTW-&gdb3o7V+7-dgj}L~?j~9tF#B zoQ7XW5ceX-kdFPEYK&7UK{ZO<G?pQnp}U35=tM>5{AlucddT?fAp$^GACf)h0#wuT6DwPjxU2%4}E| zYFbcfiv46?9cTRvt8L%)&WXfRI@zU=vSrUZ5d}l|B*F-o7$TgIN$rwbY3)gDX>6%( zId6i>hy{snj8+q2VvgeD#XrbodxYE&JxrF^b*C|ASCp++dx-gLBNr}8K`tZAr^DAT z?Dx&1iD`0A>naSa>X>!ewfN@I%C;Wx>@+$n2Z7d7Qia{jDtJf+L4nM3+Yxp?@PljdGrKmg>ebBZ208BGAPsx02-;$J)2 z#Xe(R0Qyl?{VM3`0JX<5SQI>8w1OtNW0?ew*txHC{qjbIG&iu-WLfn##0hT9s*MnZ;0=P}V@8y658@#^ zm$y2kkU}d?^x%`DP#lUX7tkE7_?SVRau~A*Y9H+VfR>?qj>&N3b1N{I?W1j9*oJco z??C3UCw2fU;VQLFrlwkh(9;nR^JUfn8#RDV2CgtG4B*%MtlMIs3}cRhv%otBurZ-j z3m;i{nFB9mxtdUccP!SnT~HX>0m$`TA%N+QEP#et>x~~s#uoW>7Q$E70)+8IO;95> zRjh}*wtQdEiO2YbxJ{rRIu?uZbD+=s1bU~dBwb(qpbm%O#bpy*oU&e7V3xRkMeGHy zm88);b3eFqY(L{MqN=p?>tTbl=8uA7t^=!xigp7LH#s?@H@6L_G!oa(a;MTo@2)pi zB9r_A?cu7&@YgNU_v{|MhN}lk)r$sAVMO_(F|?Ke^-Qox$SU2@#B&6lqI1!`09z8= ze=-9JdqQCC3)?3ym-W(WCpjMcxB)^Iu1^o%5)gjE@Rk)`o>@{yHwyh2D*&62yC!M= zWf39ZS3hgMKLamW=(I&=@jV zseC>1tQlN&#R1i-u@BIjqpFZPIcK?s)&na@N*HI}a)N`nEt6qLl*zE#{duV)28Tre z0Jrgbul52z#l;14q%B!^k5YnBs=P)8fo1ZDpbc{>^&7W~5NC|3g}4C5UULPip&<0j z$lA{lrvXybB6Y8*s#cL z!XKwPEFaV2J@9sr2r(pTJqY8-Euuj}ifJ?;!En&3{$QEWN_*Cn8KF7y0LH6#SQW5z z>Ca|Sg%PxDhJj+AQph>rLyaci-!tw1?7NZ6<^2;NkD7`rQK-oP32wXiNh@y4<_73F zkFf@oJ|GEuMfG}&NKQ=t-%rfUGi`Pc5@!c5LvU?U#Y z8JL>w%Yx}q9(X+QZInZ|uoM)p3Rr-n2B=Xv6>~v{3|L{58O;Z^tz*C4@(IgCg{^_Q zeb_9Q!_(0EHZa)W11+P;Tab@lxnQ;i)mhG%q}QYQ4Cc|42JAkzc7uc-q?0vR_}F7F zr^#C)n{79+?!fMH7x-|1UP&%B-|qFe!k^ZBQ`(aD13|;|t>9rz&WPJEU?H$y95YY5 z^f{lg-35Y2AcCL=QS0l6^Oy70`YD6II{7E75Nbz%Y_@^gHpce;Q8#AC6UWRqS z^Bp=&jkOAfAbz+q&yD|{rQ_NLJ70u2YVr*91C84T;BE)r^Vmy|lP(5$8UAjeUe67D zzOu%H1CJTW4(XZmPP7#WUke6VZ{G4C!DG;NG2CzBKyT{uMwJrP(ETddR7@yyMo$|x z`$_}&mLMi;pHMT(>l{)}{Xo}9sA2_{gZ=tZ6NoTnK1%7w2C_4jn9Yk-@D4I#0B9BD zbqXq~gJq*_z%tuT4CM378#zW0A-86k9!TbnKt8Pz^=1D{B%pv;_8Hlm5qU`sH*x$J z{cQ>P{mM2W(l?THeQI|g04`*`6}%EBaPd*2cl01mB`Q-JsG>Jm8JQNA8|P*q&7WdB z*9eX8(nmcMWN_~ynKpYvnNi|tP=5wgV|tN_lwiT8^%yCbmEoIAWy7-t#|&+?3|?96 z)rG-g11#4uvkoJM=PqMA^$2Ffdp_s}5E%)xrK%r*j~dy%5*yOBG$#b9TP5)IXb^w% zd4Z}t03KExS@uK83W;ZmNj2kEEpUE}3!u{8IjXR4tFZ1qrl=HuPnGF6+%ECsbOh$@ zFS{X_e3`Fc4%}ZdhDcbdJ=)}OXXe~|HK)|Y(LIu@^98Rwjq zEO&ww2X`QqG>k;k&u3J)q`q%4PYLG;8G@dkywL_Egjyn%EWuGjQtGglX3ouX38{u+ z<*FC>=RzLkm44PPJnHo6fxk%lTucuE`TsOyZ^-+B`=9y1pn)gF7v&Vqz@Hh3`=bbE z06`2n~(ndGFHE-`TDsJm&c%*4wdHl%Cv_~m$IrCAxhA) zVkxpADbeLZP?0v9q;+hF3bnaVC?FdmVl5(;EgO__ZZ2XoX<`$qd}fb{8_7$bHMUqNsY+)BDW8TYRLzA_6~+m5HlYeq zW+$3Zuo6T;RMrggd!s>+?-J;D?h9Ch-qKg z;i^(o#GR(D>&Bp3R4B?nt!}BPSE>FlGd5^Fu1#NdsQFu9B+CYK?^G)C_eUB44`nNLh+2AIGkpV?(RF`Yp%u`@UnHu1!N zhLkekBqjbAjw2Yz5}24+DI*Hf?+9-nQDB&98_H6`Z^>=oiL(TrCiHeq=8?OH|1uC~ z^%x`5do3pt1k%{jb~`~yJ5lSo1iiG#+SVrd(jaWRo9jyi!L+}&pH7gc0q}Mcq?+R! zZv=Uo;9F29h_udIzbDAF)!e@)2sGNbp-+%$zqx=-5UM@6^Gy(`Y0MQ}f{~gC-NGj% zwUD}qPl0M6c}a;SYUJ(^O@!dd@I0ZLa73X$ zY4C(&DjcD?&|@C=`=KNtl#MqNF4e#U)WFCW(?UDU?J> zNhFF&qESo|C1O%2iIb8^6qH1wm?TQYq)`$kC6XvSp_{lw!J+x7FXD;b#1m6Q=ab&& z6TgHfCK8Pg4uww%$G?9s{3|~Lru*1^5}OeB-Vn%y1~QUxH2`-9002|tSVLnP5+DWx zP4+|@8uV`1J&>N8e`9wxu-MRy?(!CJ--aDz$GF=~0`8AU+E*(XpV1#mY*w+*Nb$B- zkv=R+@moB3EG%pKY1gmTlFr+2TfdE#uUDh#l`12%swy)XA~?9Bqm`yHsJK>KhN`ND zFs$<%<9-|n2{=X=bZhg?ki!}U1V6YTtQMyU(WDeL6g5&^X=%Z7uBRPPRo`86-%047 zDUycoRo_7DliD=kuBv0G?_OH+&ik93l~WlA&wKCL#c}8J-Fm~!c?tZ)=-HUSpIK*( z009&g0RR9I4Mzb%lw*j(!QL3DjQOf6tGr38*%$8b-$C+G*9DU1&ind7r#V1tuIsFN zBkl7EUH%d?)qHbu*@yc7zed%``ERx7;KMmS21SX(*O1|^U98zy(#r?cNXe5S{srFe z-UILhvR+$=yb=MVJsU_O8?@8BfInXNxYzjwuk+^1mhf)EX4h(HlI5gNUI?S8@8Gw(3WE>eiT8VJ=)DL$|0o zijEGvk*u&AHUf9%j5r0JxNQVh&<`IG5ksd_$dQw~_Q95qSdG&~=W${iKjBxbSg=>3 z^{kKGdj!r)S8@6vy_>E-rfVdwh^L=>dt%gMg^@8@QDBU2tiU&@?on4c)atnf9jPDO z-Ps?buLj#vVL&t$qNdVQ)tmSwU%sCOGuaUT`Y31E6?lpBVl&$5h|@A?7g9xxrBt4 z)P;rS)G(4Pdx75s*5>TFbMjC-EoKzwpIsoQBObRz(w}NS5}#^1QjBVDU6;D1=JT(A z!c#;5RU?uDRr`^hRV7K!s)!_K)ivV;TH22atu09sRE$B1G4OW`9e(XGfGs=Ns(5+y`@u4Ns6kz^;5U)rYS6+-SuaM zCG+cn8I~R2*S+IAi&Z;)txUXF9v+c7$1pYatyiEoYql>|=<*A~Xa6sAoly3lTi=>) z`vvXf?Xl0MiS`P%kNIl=dmn}F zKyhu39+F5=d8lb2|G{nZA?k9r4$VwyaI_mRhbWl2(utSM!=bNQ>Gw?yor0`$=8i}9 zWNDCt80oCCTG_9Ld(ZTs=SdOVyKFz@=P{1Y$vchDg%9w5s#?gzK`|_RSXnw7De5KX zLSyX|Eb5eeRPQ6(N@|uY;sg{=>hZq|b{Cg(*cZz&e<74q(X)psI=C3H4gFj*_72cK zIB7|c0){I8`f?Fn;~#i-g||)1ao&*igeU%|7Y=PHzkf!_mUaY54LANg5w>Yf-*}Jj9W{}U-4y_psf4ipJ{s(}3 zziTSQS0Xy#eoounOqV9W%T!X(^IU`L3lk(oB>O{OE;=T}C^I1&68^(yV?}WSAr&zq zSsB{GM^R7<1PsLFiMb@82mAx$R7+L$A0bPUZZ2eS7{aki8F}iBvgkq`)|X*RlTx`} z?nYKAt;fs3Y#gj+DKJUnm5)r8C0d!Boyh?@+q)Ua;b+NZDPa~6zhcLT+@vwTjs#m0 zuo>3}GB_?@lA#(Wp~MbSdRg0rOwmpn50wn50$R?J=9bhct#@$6GpRbQZ=BK`nbqo) zM4FVh03T$ICLi&^LGKb{B6i}R8CPTy5Fa5{7+$p>^h(72LEkHj^WuCcCI`R#yA zed&d7lLRN|wN(G6cA3&s*C04EFKcb)n=F~cn%Sc^bWzkfin!~phnx8RfEiTP%DOPx z{s#oOt}5rByn8WrfAckvPEu~;1J|PXGoU3g_$}{jw;ky5UI?W5)mT&sVZJ&SDpY$I zWUx~T4-keI_llDDm@l)u*-xqaJJc5GUBRo<1sb-_*F0)3aUY$;4_m+W$bi5oxQ14f z{yuJO6fFnfpBL3e)Z3txy5YAL2SdlNCx23#8@lV=klhQrgCtCK^6iq&yiGFX5gCk? zJi$U8oA&ueV5a4Hibx?Jp{Wc)@yX=My*( zL7_7NhVB~}!;y46N@yX6=YrUu?q0n2-ayE&8Ho^2BXfon%n2sU9aqf$oy;6~8J}>H zA=e6|(V|~0e$zg3m8eUa8xk-7JsYyzuqpOft-`Rs zH^+xTx^N`$Z(RqLP=&Cgt{C(VUdUC!mI((V)P4m!0wiLB9-ShsWtBKhe;Uo=S~*pirGTs*K95*3FV&@Z1ZZvE zs5;LRT(8aVhx$2Rw2m9u0ed~~K_>+K?D zQ->Y$as3~}ncAQf`Px+BhWYurUqwNYCk}Ae9}f!cSZ}aN419)jz}OD?14EuQj7E8X z%#CFCGLl{2KeqR z93I_m2RRq+EpkhL`5qeZZZFA@Dd>i!S9QL#ocuX<;Di515AeJnM5)m&{DwdT6}UGZ z?Uh#$Y6g>e%;_3}a`FG(76i>` zmP&lVdBNoMCUt}+xUcScH_sZfJF@aMJ)L>t4NOU#VH&1h(E9s5WOKHKC=ly-4$9jM zEE55DTxES{$aq3gb#=7Xg1ESn06x3_JrvU+xr;S91oUY&5OtS?NMJf*nj>gnH;|xK!p;vm&%_V^CrBt#gE)ST&-YNyWb6|sl#a@W0#~i; z>m$o(W>{vB=VoSS*c^DP8JSff`(OOoRt{y=K8i6ijAu^8kQOiFVY9A6YRG}3WZtmf zkfh?J<7%3aopW%u8OKyPCuxSr0oa(YMje=_9za>@!5@Kol$Wr2q)=Bq{%R!EunQm% ztoS>ixZ&obHjK|T+tb7Le3)`4dNMDRk&f~7`9jv>k+LQ<4;-g(@S%OL4_-Ptc@aJr zk`wpgV9(o5$pjM9{~2-P@y*dEad{cg54z|u5EJ3W&!*{eT{hXjfJ%vY@F;a0u z<@HFN*82RvNu61V2%s4i!^wbFKSOa-c}QPvs-( zb*|>|LLp>$ExD{S(NZG@#Cpwc;n>Whycyunvc`pAE{1-#>?b?RWqK22XyaN<5izLq zG3}x#N<8`Ivbh*zRrd}i%cXMRd}MQ~*Y|+#F6@H~+cQQ)+==?`zmk5$Th*v>#)!6daf6%pp=)r>m|T!9zXv%$ zALcUT6Mtq3n2oAw!Kk14-vkwTET!yNzq8HH5YQa2_Xi z6ArY?2h91VXJre5ABlpB7?R_uPC+ir!7GnbV#s+GP7EJgiPPA@5S(diaorAAD8cTF zo(+{hTmwJS?xrM^9vJ3Cjb7lKA2tJXefPF*(qK0H+>WP%5ZR?E0W`87l_1-d}X zD5lzwmnGk^*g}kFDKoSYTC`RLhX8ULYgRbqRFhv&BaU?N1mOv`CREcA&Ol-s3LLOM zHC|%Ag~wplRiIqM)G*!|=tLR$*5C{C!vov@H`};}Zp%9qGHhg$A0$Zngj}Sk zteKOn-C%ZcLK1SB+AGzQ|wl z(}r`j%?N8sv?Bl?>1bK7jJJ04HGUE{IkB<^jm!^`)U~VD9>-i1enVWHf=1p#&r( zmW0s>DifF>2x~^{;aMSkj}M&%D=XDMuESWZdpS~JRQpQx2qm6g0dBkhc+@^B0pv|_ zA4B|gY7X?aDh2$T*C?k~Ad>?3ZX{SCg<#yJtuvTSKL;8$`A7cht-N$XeNOMa8Ucv0 zrh&TsHQV*=PJxg2RW#lIXFh{(*HiUu9H!!&8X3A$mS}|ga|I3Kdt?+z(%LX`jzS!~lz3XM#v-%kdpx-a|XEtI#F%U`ccf zvTc)Df*4cU@J({p*ZhEm)`)|q1x@yPo?`3uKr};Qua`i!$&&kVx5UlOip)w^oEaQ> z!%%0aOxpsfQFv71R;G*s9C<0(+17TatOJbmV@@&gRIsiV48}%#=lF8BYliTqKl$J@j~wsTyyg=-C z%jEV3!BoWtTqx4?vMyIR2#~9;wT(D5-~$gCg3A?r^3X?$xE5tbNzGbB=&dmhH)cvO zh%rh4Jjn*eCN_$3n^#0^0dYCLV{dzC~ zLJRO}{N-*0x*=|8i+NN*e3?lRr9eQ#E zJ5{&Y+2F>)$J$A*c^}yUIO;G_z{M3|F6t>&WmF< z>e*q@&`PqvSrhE(m8s@FO5RNiH4=Um+Uu4-0N2@VsZl|!+dFxvD#Ew4c>R?IaO#)j z)M(w-=J7+y-}_yi#H*_ye~s4Cl5M%E&#i4osmC?6bB9`X$Q<7LqlT_72UQ%bNJ?4o zj!yVuk6+V>+#&NXlvuni4lgdZEu3(caof~1^%hy^f;Mjy-qNLuCXsjsANoH%MVb+s zZh5(!ie|UNAxx0j2?AR%M##dN;-J zr&q-Om)4Juy{qW;GA*batgd@?!W!q}OH?yUAY5WRkB^_

    %dT8#&n9#M4$?9@Y?VN*Gm zQh*ImiczOIq+ZN{uW30x~l`HRP05Dv~bD&u=G@#VmT^5$vc`F_8(9=LYd#i41CDLuvw^ zqdb4_T43cmGV6G|ib0EcMXb0NvV2d#EUJe_8tb-4i~s%eeKd`(pRsGD^PA|Ztgx_O zxL`WtIz!xfbn++z0gErnIuNr)GxZnW-4FXSGj>GRO^D#8;6AXF@U2z-KSpCtVETcS z>Tn(TCutUdBN_?AoFMHyb?Yd=mNCoWG@(Y!^K8|ntt)e^WH$YiN3;h)26}}dg&HBy zw{i0G<~B-qGu;)e%cb|3GwnPGJ~Vux?<22kf8Tp|B+M*sj$>`#JuCeSV?QqGFiPM3 zUiZqsSj70Z*717psJ18be7Q>%=kV5sr~S?=nn&)N!?N{4*Wq};ZK?2+;THUt*SPKX>TVOcvx(9DehL2kE5VxhlK#W``B_UT~M)b-{wNe&h)f{iuq{xhIlN6nwkuZkN^RNEmkpb(u zJ>{@Ws1|r>+cYwAFPTe|FI2eeDb7IjTOu8dN(4O;jVA-Iqh0jZCB>rRhZjV`mEh;E zv4=gJB~s6nYjXf~_4k=lJL6(T-DcS=&fA5ift~P<23wu1zlUdpCj3&*k>;%r_@Hp) zO8feale4nvVut#oos9V1F27CFD+Q6 z=eF9e3<`1Q1r(@H6;u{J%m0QF*%#OfxuYdoze#UW32}$wmo+OakTj>1kOY266f(48 zFmXv3oho8S371zT?iV0pBsvrfXG@fgtr7r&Y1j3<>c`w&wzIb=2SKUols zm@5hUC+#f|m?*u&EEr^P^wrUZ{UP$Kp-h<;6#jVKx$-yy&j44XY1J~4*vfPjwf!e8 z8DDCOZS$vjk>u?lGBkJFg3EVA5yhXZ1#&CCp|aFh&jeW#chFs`*}~SbE2CK+Hd_e~ zXY>TA2*KRzmWSnYUB8MtgmJA3FvWF;J@m`_I08=>P=DOuM0Uj{8^Zsakk-^R?OVUj zFsAu3{p)i*-~1)a#9qu64W zK6(&B=UQsYE}iRZK!BKse_Vw;#$v9B|0`yisQu7SuQ`U!7VcB|Lcm7&2*4bA4A{7h ziN*||P?^%vU;zM`cOrOP9;1={tL10R^TGgjK%bRp2&Pv|0iX%jPUL%3jjaGs^Ui8i zg|(`rDm;aD_X>2Hs$884=^LOLUCv=URG!MSn7~fEv}SGf`~oXqb$2&H(F(<+LWALA{DXneuceudigxm0wH1e&!I4**O zj6I7UtXHsXP)T&8lX}a*-6!BPb`H;(!d(){Ky6m=T0ANDM9)yTtBXpFrgD{p8!-s> z*|Vk2+NgMa19>`MJzZ!aU+ms!|5}BoCZdT}i~7-bRz5$ZF(-^$1!lp+B{3Vq}vWrtsPqs`D zMujwD*2(DRn|DNms-{>H^;BbGF_*U!wG{_6~nZLbaIllfK+ zW9zNz{d$($weHX+^$EugEChgLTivu4y8ZQqs`oNDsjgMV)_a1mVLUOlRf2)mT61@) zHi=2{>I6`v%0 zPdQr}5i$A%otU;S%@b;N26duH`uxi2cFm&QD4*H*eJ?UWPbBS}e}|S3?ED4PEQw8Z z9yYcmjrj{j#644<+F}abTacRE%TlG2H!{)Z|AzM)sYrdStuvEzu|lmDWS+kN3wMkI z$&uN@^TV4^MNb9PDk%?{XxTuj?|7gn zL#uLwyvJaGaE$9cvp-ZPyx0jise7z{$@JgfA zuH9;>oXTdjcx&tJCbqMLFa4o(G#1jXb9B7o)D!p`^)VZ9p>?r}B%lAioF>`e;cyZZ zzo0Yd;-)7pbnMHOW-jKJewesPN+3sbFEcgQqLb-i$tG+`zH4(?wT1jWEa(p(UCLWx z=74``aaRKWtZ67s_e&QZNHLQ$Zt$=<1(H3q+1Cv8h8ZfWtwFy0zHRoi@Od$Xdp8o8 zghrhBPbz69j^E@ODc^yvEN7oP_Pp%(sO)UUkx>&aqPu~nb&~V#R0uhu1k02Y&4cK5 zZP$Il$a2v1%}Kdv8%!4|Lv??GpMEsvym{bMy;_w`Mj|RE2-=g=J~4Bx3g!RY9~p{{ zulG+8RS`5|Oon~x=@DqHQ0l1YDjCXZmsHiV8Z#T_@2ge2k&R6xCGCu)+?Jzfk96ma z6;n2KQLeQST3}e~KaZL;@Fkw41YMPbbv=m!chGkLtzV3)Yqs5g1MA z)1I!gRMNcObKAqU-0nFy-+HF;d{YIQV zfiYfp=R_TFF6nN;im(rB7}vd^Laq>?E&(8&lI=8!Ih zlX@-k)fk@_@kCSXbLYZK8%GzlO5jZ2C~*`+sKx%|y7s0i>X@SC*z1|b#xN$XRdG@a z{xbcGyZRYqwr$Lb^pvu4L#UCgnzWKCxY0*s7Vz9D`6*LqA6--+Tl~+yk4o9&kwndV z`CrMx8C9DsU$p=i;J%t&ij$I+e~QM3U#aPFKVQ40e|=>2u7z$}t+$Q>FQ>(gOnJP& zJg3Hso6q|EcVVATSN7d9O;+2a=94C-W^QS8BUSQrONX?uO!d3!BNEMSElKx+g0lD) zI3w?V^4Tm#rw$+_rMJ%HdbG-)lt|%gU81*7io7^!pVI8vCd2lHs}l4y#o8@-h`qbL zo5pC=KhXLcN9~n*+RuMye1uEc*^%Xk&KFjS(d#_oX03+f*V6=Q^C)zEHJ@N#!X(Js zWSZ1%^3%@1z(!qXAy-rlf{=)viyKI;zz%F~DEuQzsg@-tDh8+h6PDJKgi7@6X-i>p;g6vy4Kq z2g;>6eJ!vx#(HtZH|u?9e~$N>9YnpA@wi5vT1Kp(_>7;VW#{ zgr_E4&Z8>4udKgQfeiSMgG`sFQlh+tk$%e!*V2slVYbnL$~6C>zbTw=o8~5YgX5)N zfs)hcl3Kz*?K!CD#rL*ZTYnd|_NIa=YUs)QHf;Ep%BHa4c$I+I>1gXq(aUUXi;pri ze`Dk0KUQYa>Ghk*=}7+hCdMNQqfXmDq3MzkCu96_Dmqo0eun1Ke{M=mQlUo0gkr1v z`78tNhGI$Jh;xXC)O8 zx5{%W!+wpju7C_XuGoz@ld!?w6=$Fq^^FOjON<~clW}Ii4a=5R1F)-0g(H)CZj;Uu zG5@5e5MQl736sQi{9`0$yA)~Z-EV(0PWX9R1CFl_rf<;jP05mg|3Wz!%p>M@K;mFH z4qgt!hODR`Hq!GiH@C$I_3rTJSWqnnj@9(lqeK}TD*)-Jaj@RPH_|p;J#U!9pn9s{ z*ey0Ia`q&6raf2@%O|144(oV$EIG1u755ebGx>9yHX(X)#|4r!|Vgmm(NEuG^uV!5tq6a;cG&FQ~-e`1#|#_n^-%j#~eQM{-^m^L1It82X z$<7YTR;|L|zQ(Sinh(u_M4<)A4@=5-(dK9~0{g$G{(HEICy?+tv4*S^hzlR20|RJ| zdj#-qUy+#wxfly+m1X;`s-fSvaH!>QoNiA%77n#I7z;Qj#xtV(IW(ME=A^MpdIv*i z14!^LqxDe44cqa{< zCM-1oTJs#nD`rXP=`$3MmEU+MStO2G-CL2Y3EyKzPcrNE*iCDv{k`12jBHOQbeXmN z&{lNk=Bt?^4Y=1RYBQMij^lyHbZ1vBaOR_vSD8AvZ>JpAD@^2`APTt7BU@RtB`(CG;WX# z_RQ5BEu3L1H-hhecR<}E)?MDcQ_fw*nLbfTu<^MrM^PIfd)8=&;~S0} zZ;jQ-bu}b6zJT$#eFsk*YbI(O@+cIFMGFC(8sY07RwIeZQViuO zjBtrt^jU>@YI`ozwOJDSV>$bfHQ5nfhQqJEE%KhR?O_;qQQ2VXUiz&6Fl^BJnIerE zfV{%#F?SkonE|B&XdPyv;0Tn0xQ1R0n(Sl3%Y2fRg?ZH_%DE629uETC5wAh;`RWuL z9iE;jL*!GKw7e8n)uSpijw`21#NtGL-GQ9jsUi=V80O(sB3FdFkyvTKM3DXS;re)q8URhms>n}^ zgM6Y-hI+JKRypuqI%I)&8)6Q#uC%&{_tk<-0$5CDwabSy=WLpU)(e~s#}TF9#Aq^j zV%LhCaLhfpz?l+P&iiFya!~10#&Gr#a;$u&sb7g`=A?&1kbV-nz@x{SkI=xL)yB?s z7ceZT!_UG`Yq!dW>PPpvTQBz-iNr=lRc;BUrOwuw^SFNQPcn}~JrfD>$yg)7X*DER z;=)u&gq813e_NWhvtX_q0=5whrYL7q2lVAD#S*gh`V!~a45%#K4Qy<_^}O-78d$%| zt$u9XC+%D$KrtM=;Nvm6+vYyn+5dDI)OCWd9VT4okqZiaD1j~Ry>Y4c8c)r3IfWu>K$WAcjf**K z&al;n&39w@?{M$DK&Ndiq-oabJRcu4L$>pO&XcbZ9Mv_*$lq*j2kkFc zAJs=bh*tPB~$MlcPFV$jnbMm}g!5o`;Bp|N1 z28rdpqSDVcn$rbWm7yHBH6NVX%PojfS`Lr+nx|Gy-p5oMELo=1mLQK9dc6&Q5FH6z z{j5;sG$Uuk?4f^ciLIL{XZ5epRELw@nOK6<+OX-9fXfA%#xzV@BPA4U&>`4LYrQu~ z9$?vOEJj~noJKsZ9H+4HWi??f^_3BNK>plWc_}|UPcxHc@@=~D{dfo$fk-At@tW5H z^+%7vHBj(&Ewv}pzTH7haUtt)DtP!7hZo0+A|54MfDEj$yQ!Xvprfh!3$*MxEXX&K za8D^n;zO*wImeWM0wf>%4@FYkiyk3k{2c3?@81WFTzkX3^Z^yj_p3d+Doh+5(ep1!l8LF~?6MfW}7i8-mPZ>$(56DC~=I(miVX=mn=U!co=yJEt>##vo z<2@144><`uy4GVqNF&GPLk<1}i}lKDz?)TQwJg#Y&E&h(Fu+nCCvhV!M<0aM4T%@| zN+&atOoW&iDjtIbR%dB=!Yz79;~XY1)j;_3$l9^2D?>%+de}VJoQ96*fBy%@vyJZJ z+Css?b*)(L6K;^gLfy>q&P@qhNxFhpbYS>qK}~#7(BP)c&jM}!gnbi(!lHiK-hh`oRKArv@THS%ioaci zx>@||wtWduQJnP>6$6rh4{Y!kO?(@v>atJk&lWwy%uBfOj*IpC?X-wZe=VI`HHa!e z<{1g1cL8=H8i}5y&3jZr(&&=zQxRE2Y#6ITN{NBdVyxqJu;W1K7v6S!8&<+143~ki za$)W=TUO92f}+JS6{$@5DkW;SdXUOZQ6*=c;) z@39yMnRaH$j>u6lG!j879lX=~u zS}G*%aI_($dNS-q>uIR%^={dXuX$HKYU=+b zq}%mpeP%1v(ulJ@G&q5Gz|UV$Z3{K)o4Qle#s_vfzf)utLROLfo1&7u9B+bgfwK%x_~?$`{NTt3eb$t;9bi(|QHm&T zok}ZgV8nwK#l^aNOdyhDMY-R2Jj`$O`+I+-i3JQ01zz%mAR$l4B@j5pKmJp>@*K=( zCL*Qd@F&s`6ZKvPwrDHyGwAiHKC@hKz}$5OV>AG|WklCe-$KBeQF?w7w>;)?i$3N( zmtvCi57sxWBab!#bEl{12@p$UZ9LIwjH-Kaq*&{urdpyP4dz~^VllD_rksewMJP@U zM}Rxhdz$pemy2djDTgS;c{4aT4Uu?k-t`clpFmQ3rb3e~>LzByvQ_ zqD(k)NSY~r#3zmQKYRDzqw9brpkpx}aY^^ml|u_%E{FoqH3|VL;}-XGFCN}DNXgI( zy~%`tZ)VnmT-gV!RhqnJsWIy#JzBu<2Tw?gQ~J9ez*bqyXM(qX%C~@5xxB4!fqY5) z3h)GW#diVsCp9DV7=tU6;|Pth;dow)XLBpTafb+sv50C?TQ|~iVSKip`^rl=1)`{&I!IH**I}yR68)qMSDJQEYkayXD264bd^nDG# zPx4f7jzLC8I9L%D#!kv*MNAWUsc1Dtdc?>>L`M93x&JQM60r}Gju4khG@#&h3N6Sx zcjiRsC|J1?4QDMzL;XEX4B>aUX}buOB8(9bFN?01|UL(?nxH!!3#V+O*vN~xBv{ftiL8Bj+TDb-n1Q0M_R&FG3=pX zcVhD$f|vg<1jC$cxlPvA+|*)I71$_tCVcPFU&=}M)^D{n0EybZ!uGEs7vO#!zu8`# zUJ*zhrlw$o5v5!wpE*M4X$SN3z|tk!eWf`WL$ZuUx6ffdTqT3SB7fF!tc)3~eoD{X z8(twEYJF(KsQ>uSe!Y8`!}}A#U;G2#I;1p&vX$1|UkNk_0?^|7joKA4?Mijp1dDvR z|6Ko33tO60`%x1U=YS;Zt#H_-;|9>VW-Z4O)-+Z6)@a71OZ>cgw+i${lO<{XkVgNs znyMBKBIgWHEdx#TNCa1{h#TP?Y3IBaw5@(?Y+4eQ^G;2r(`8#uQNVyFwFDjTIP#r1zm(y#pZ;d^-EsVBI7HvbZ)JAp_S$jdn5Gu^r?h*0G)P45s8s`{YKl zK-z2{txmOiRYL-tjfQ=cUDs5G4HCru{mdbtyIfI%a&}#DNsn)BD z`owEEA+>(5WNvx)(=9S6;3;7s=HW)TBo@rBo^v6X(hp`b5sD=1wmi*AvX~c@Ib(uU z)-(nhM>!1V7lipBAk5`Z5F>#vpacMD3STB9w#a5+^FW}H^#=}SFOrc$Tn7>_evD*q zL)`(8Zb+X9-zbhMk{k-EDGv@+9hNL!LD*;^OgAzSfNr~np+cbkA!a0hy6g+xuzOgK zT6h!EH31Iz{VFqcgDr%*aC5<&$fY14^y-9@1LVg(Ke_HGTY>O*rI8Sp-vG(`xr$fR zL_7BA*`5*;Gy;F|2P^}ord=0t$42l?4sFtZc!O#P}#w&$FkXy7^)-uo+67>ZLtU2`l z0!6DHpPO-+A~5jK)hfL_kyd_jZH9t1B_YC3D`*h=id6^+^>A*zJbp+uo5znQkMZ~q zn;_L7n#s;TJ(m(NR)O8O_Ed!VXvbHLSTz=yF8rH@$CN4*M_?TFuwsno>C*^8Gby z7^q67?F2&l*Srd&wgQ`LXfGj5wimmJ?*l+(l`y@hdxTSS+G}d&CAa1BB||o?MHwfb z)#k_Y^Fr$o&KltTsP7k?A@)U4=@tIR<_BhH#I}DV+r62Uh7C-lnmY|$w!_i!&H;+y zB`2d(<&++a_psBYle2zoX9ro^*O$h-Sjl0>aLjH}yVkn|AkH4^J@G)S<5Z%}xe8 z_&lyBml~0jUeklXssGcQC1vn(i=ik8(P_Ct=Q~KCLmh?Mas>KC zLgR#t0utD$a^7|RBKOIteX?WTAj!e`M?k_}ss$oj8fS^t?aXD>)Jf>sN%qAj*drv3 z6c^i95lr{7h+_WYzY3Iei+nNx6>6;>X&U0s-3D|cl-uePgL-kWD`Iz8emOeJ{)AtF zYm>TU(<($qKIQ5{a~i@y8I>N$#8C-CbTeOD7_w#mN3!C#Iv>HrM^a5u22G`h``D$@@yZf>}T6p5ZJfg$+@0xclvnEx9q=CF|z?VB*#`&ICO2sAOy}Ym$qc?c7UakgAHth3Dxew3hKDg{rU&o-t z^AT0_)pFcy=w`G+l^8u8KI(qBjmKv7T!S$ttHk2u;+oyHqFLkDnjyo654R1uqt?AK z&#}8UrOg^3j1Uug9tI)9g~v0)^ap%kD6aEpscVY$`ODE_v@P1`=FHdwu1y|(tgvZm zn-nAhj@az_Wpt4C&ug9LNinF@89J@9EEJ>?8gg(Pds~>AuNb@%wk~PQBRHdB8u}Uv z8P(b&^e^5|^(wKWNVH`V=PY>yadBsBK6fnjEK;XJ*yN=n<9F7=X&J;{tztWyUYA3J zd>|TBVwJptxMA;p@7>-mnPX^+^CDdj81Ztf(5->xGer$Wgmk*2LA|gaFi8&Nd@v?_ zdHd7v=1LFkDA=}vm^_KtE!t^LO%d5*UbkERd4yQ5AyA*vlxcm8o{A`3ohiJ?H>Xfh zF6;2Bp!{zI4}vttj>;5;hXW@#4+%x^y+3$6>&mi0vHX}`pN;fJqNZVr;1S`RGn-+= zI>jV#zTh(4_R#~r!&!Af)z|Mm4(PU{RqQNR`R*t8g}XN1W)t+j+P3gWO+c0~M{T1W zuAXAFBDQ5+!tG<`q^q`eY-v?$=IRNy$g*5FeJwnhiQiS?i^o7$J&#u-@>MQf8_J!{ z=^E3>v9F_PTL#>i{`xk}(}4P7Gpai4VzNzAK+g*?+mtETzzygQheUTJKTy1rRA zjcSf7E9k2}=7|HU1ZUKqsH)0tz@u7@z$qN>Otqz6{@>_t+Qn$79VqzNf$yp?b&%tH8QAwpN8${htEzMU&Fi)P17o>I zlj%!u%LUI~7Ctzp>7KH~EeU#Jo(ZMV)hs z-eTQAWY>f8>K9{^2Mad{Rwu-TY^P1Z6PK&b5Ujso`2w^;^z=>346>e;Uva3uRNGYa z$y>YQ`*iK%Kx>?*@x-cYACs8fG+H#~v*=P_T|X|kzzv}`dbwT2k)y{4b3Z4nGvYj% z*#yvjcfIOe_?zVMt|kHhgWBb9Vut6q5nfxMOlpC}jlGW@4!!J!c4>7iZ9)0}zJbN7 zE^AK>UBM@OI>REsd~FcL82nGeT}ajj5(tmrAIHQy)zW~tFWxL2f*CjaNze6v;}Lbr zQPV|0OW{h1*eykXQ$rfIn@9IcjR7$(A^u(G1wZI6r!z_P^x!#~<515nHg#8riDqzU z5%h;Sx4Jb9lebB>i@ey+FEt$HCY<)n*crV}VT*MdEt#A!#l|#+z9+;OgvKipUH+7X z)+~B;=Lt38yWDOFz3pK$c2x@;sq9wX{tvL!g-LX=_Yw`nO)7z-CmQgVSzQB?2!ytX z@1dtsoxbQEhB#$;F@hikLX&Lb%F<;)a$rP{eT_t38=RAdkd5F}8t_s@4QTC`a^O&g zAm%O0^xJ3K#L-^uwU(F`fGG(SZ{=29Ru4neYyQUa=5T82?R?X3dsMXn zCcfEEr1!5sXOobAD_3zzzmsZ`jAfnJHhRFjNvud*>9j9OHrptChnGozDuxL-+A0{G z(7yEq=NcTQjLDB5DUr_gaMV@OHZEMtMeQ=84K+O^EmTr+^_Hg!$+v(f*^HN~d}wP% z%2!1uP3iQ_V_NzWKN@NwuM@-qwqXp(L29x9DDRBaJT7?Um#}-PAMa3{P}PNPiQj@+%ukoQJl+ z0wOj7arm=SwX~-sxglw{N_P2A1$z5g7<9ePjvU&bicQO(pDvPqUZ`i2+){gcn|QRF z9^OMOg?K8zGspJrxRwan?%Cj<^cgML_I6f7Y^v|5-hgv~qz_yRw_#5{z7(yCiLpBp zwHb=Q#WZ*`=o_HoZmU1O^sXeXj~4#{D=Sj->Qwes#&yS2y|3;|*5{=%mz>cJ@)!Jh3UT8`>ZKJi}Z7vn@_nADIl>guS%x|wCtZ=AzhWUx7 z^!6u<$F6-VwzYcWd#>qBSQ-|0hA{QiLLF8WX1SF9s@WE9zbQ7!)p$ZKsKN19qe#io zyGzbdoaduP+kStfZ@>}!#Id3#fuck4wB$SKXKkR{8NJu(;=iQfN$a4pou2IdrAAu< zzRfe4s%~BtzDK9b;^eBNA3{IOOy8I^8_F4U&1#sY?~*3s_gi=c-l%#n|AeiFV?@s-~79~q4W?4&Oj6D1M2d9?&|@)=>i8^ z=gA0-Ak;2*OLv0I!*>Tz&f7re2p|UlaT5TrbO1FW0B`^R|8MVoW_#w@Z}`xoQsc4> zLA%3#CVXH_EyKONo4wo9^WNLr)iI}cwxH5F3F~z)w+h#`X^j~n zvC$ zB18b!Qx(N9z!XL2#@NTpXq##G5|ZS!-Wj}ddCTuVrOp;u#!}!q-Vm7NC}sxb@)$~1 z2n#hp8cZX(d#7TWLN9f}7h_5b*&DRbG>}f+&)&Sfqkpu~3q zA&Metm2o)VA2w%<@FU0kB*X()*ifces~7bCIAsgIh3O^fR>@C4D_z+54kZX7C53Eo zAylL0FEI)&nDz_Z`w^3|Qky~}P|5`)%5UG{?cQjHFClo$n_pNI-!$^FQD4T=Rl@`6 zV#;+#juZ|B{BDcoLeoO=p9dGJiMN1f|6(sq?+pDs!buUt8FY?XIZq1LOT$ZHa(TK( zO*#si%yg;`%?D1f4viO+f1cc9CN#x2ozmF6I#h&}N*}2-7$;M&J&Pd-<7TGdrlNxz zkWC*rb)x|qY&t?EcSBc71~!5s!i6Hp^^i4WE0BpZo5xqyEHGGw6|$#(VUHZDXVd2t@mlyt@> zp`Pn-QVFtAi%Afs(MOuL|H}9nQWi!cM#4hMme_|7GB3WG=1^5oxg)JG#ec3ckufs! zSbDNXT$PH^ENz*m!0c4V)LH<4zeeFrL6jj)XgfJVl2YbnO)exOC0(5sc~H)I<)s@p zcu|E7qrOFIO5Uf4l5n#^w@8cXHI%}>dz2k1mZ+dNaoX3vQS?tTRj;QSI`m)n3ZF_L z+;|4$VVd-wgcps8=Xy8NOl%DAfDIpy?$z+kasF7<1%k?pwqvi z=$n+gvH@{Lnj1MS{uTaV;pyDv!k?PCpi_OD?-Cm`G$|5Otq#(6k589WPzIT!riFXG z_{CEx9Lc0PndW4tdbZ+C5*UhTjZLKL`$rg0(II@KR)ZVLxcu|4zms{uWE_2#{(qW>n5lt%FNy7tVhE~k-HF`FeDDF!~wH_6WhTe!)tKd4^R@x%orzN zHHOW)kntFcNlDDxE{f1XT4u2i_3@TYJDiQ!%SXR6{zIIg@DiaDT!7M#Fh?Zxo7syB zw-JV-6!DHqPw5~>UTF`^(dX1j0q*WekLuuv-jyWmBUs0$^F9U{th*CKdff;=lu)6x zcv7vBUY#1A)e8qWlk<;(=XRtbCfTI{eJU{-3QIpF9b}?|zzn4)8N%BictmU=h5KAD z-1ynY@f1$q@1Ei5QMtqAqf}+|Ut4N^8}29IJ^qWf*5nXX{76Pe=Ixx$TZ@|t??CdP zU#^u&v*Aw8^TifOiY#&E#P4ZNsE}_z(q9;m9(YlbuRrjZ2yss-LVs=n3-M z+At%-&iqx$sbPF+9YO-6t5tsg7Ms^eIpKk-=}>#{@rP7iJOk@YW1 z95lC#6}eV^#lM6e{%#Q7$FVKLUS%WnYs=)S!fSVxLAKa5&2Oc@*uFks8?l8<2QR5; zM2#q3Z&A>AcBo>MXFr)FbF+fXi;){GC$O4Ac`x=0DSdjXWLhYb#xxG7yI`I=|E6G? zgTsPkI0PYKW$!j|w+&B%Bf0zu<#Ww6C6Y+G!lOJM*I6W6jH%9y!p5^w{F=H7nQ?{G z<5#o4OtmqE$CCv1&FGTADTiIM)o1JUy!v+3`I_bU{(!f%Z@CiiuZDMhj&YsHe4*)c zHl__1RFFc;LB$^O!7`SsC$;s>1MdjumF25dRETuqrV#1=k=zw3@zbA7c9TsqxT^|2 zRn75^wO7?N3+iOC=N>o6;Kyytq{jBwRc8&8;D` zuPp=gJzcTvStJf3_I>S>#cqS}F4^QB#`4DxWX^Usl`|(-*rzoyI)gkIVbs(woTeRx zXEDYwTD%YbaPyf~}rbE%Do}7o7MjYF$zn*qYV4lHcae%D-VRvHG6WWDc?TPi5WrX1S9b zTIgxv352@nhq|W+Tg?zz!ApLhZIJtLtxxC2Me@X5snSk8XZ)p0cO{;n%LkHLHky)e zZdlFRYXxU<+ObEIoH7O#gnf6s=v~OZGx99?R(1hEhX$=J+`M?_IWjD}HE`UCH=71~ zlfLUvbDpHIU%Bsv(#DAAx1t||6t8-%nD3&MIGsA1-j}VQbPtlQZwZ=Dk-D+kH?9_I zcJ^+2V`Oc9XxZa1qaodvnVCWKH@?sJx27XHXkix9X$o~hA!z7wyB*fzXJajiIgR_g zvMhDtE7qlYgE4PfU+GLxYUG<#ec3&b7hM(01t02CX0!s2KyBuF=*%t^&1sBu zoxmFP4iF;EE=Nd);DpFwN8F69+qwC*f!ordQJ$!3InI~D6HsYVr*&_+{hiL4Uy05; zzC?9Tmq2#Gx(at~G)IHHP2mYTSm0?bX9q?eYxYYU5OJn%%OR)*#J6nr-^_S?urVHlCv9%v*Wh5z!R@~g>ac(?} z(2uCmJe`t@Y@LHDkU<&8iN=4w-ZRSsE`R}Gz!)$F3;_ecfV_XK)Lw|u%_*Qz?)+!F z0CP1fDa8tPvUfIRHysJE3xEM&z!)$F3;_ecfG}VT82JaCRa7sDc-YOOP*?VethW3w zM^mP`Nf>Yj3;_ecfG}VT7y|}?9S00c_PQs0`;#XL9`UOMS7SI_%iXap0*v z3|j!Zmyhsahke2B@`DS-)z0$B3zO$D8Uut+Smq{OacGrzNQ+tS2L26R4De58py14R z0mTK(?xla>8?9G9#{hkq1!%XB!W`|^7a!gDiS!$?pu7Sj3kKi(4d)b)tAHOfXY3{~-`1H+g0sb0W| zo)b+zZRmL^**g?gX*V7?^$Z~o-T_wl_{6}jy*o^{YhLbN9Ab0|=8`uchR;p>m_=|j zMw}M1_!R{l9o~C}AOhMLUPC$DMJyDh&5rWu24?}si|rXtjSnWcoPQM(Bz)KM37%q% z-!@<|_=a%6ie?XhTL#c@*Z^ANxHMJ1ps<1O77Qja8U-;{lm7q<5@qfia5sRq_u(fC zcuwy_umz58{1cac7xHO4YWXtnijoJD1qkD^J3xNT4~?Jc;Two2fZk(*P6@7tcVHGD zG<$81Yug6G<68`Af&O<-t*{9I<@M-(cR(=JaeRwF*rwdCWBpx?O| zhWGf2j!=hQRluwP<9dLpBp2?&&!n#6hYE1G7?yZ}NYxea0Vo3SIC^j_P#3>Buqb`p zVB$cy^ssz06;n0%{JjnzF#+FtMh`j$kQ*vv&@N)X`2eaS)TM>w z#hUtzbetLe0XV&{_yaH0^!ekaknB#{DF70mOQ43HOF@;&YKlQFFtZ?7YCl~8d8QX& zK)`@I^+in<00DSDXEdH={`|D~(LK6>T?Rt!B^s^(9hu!oxAf7uK(VU>qvI2+sr=vp zO?z;QS{wyf72*Jpes&APe02la1<>gr4EGuWcYnIos0W9l;*blo=fLb5W`6bq$N_L> zLh7%(l;lHZj8{Qhw>C(Xr1Je`2 z{4zo+LlT$FHMiw$YYup3sw|xAwXZ~<|YAGPdAQew6D&oB>=OzB7LISq=s`R=GO9Qsp@~31~%%+#(K;xpdv8xXU zZ@u|131XtuDsmu%3E23GMO?ia9j$2RlEE5GFq2`*`7gVH%T02hLZ}3YQuqaDu|r=e zh(Yj7OCILHX=0VW1)N8t{<6r=&8Yma=h$sk=H(;EMauC@U{dZNYxcHH>FC|9VAaU- znlk@Ay*dN6V(rzzZbU-oK zq)y!Q(@6BWu}d?Qnz%t^MJ>dx-R)_A%#0@~$g9}7U?am7x87_`caTS+LQ}x4_Y>&j zs0Vs`E>(Kb(}or^T8@=AOxj^=zNyQvu^2v1j&|y1d9~dm#!s-te~8(mg0-W&7W)RD zy~DK|AyR$s)8gbxM}oszups71{womfBLuuRo1qu}8fy)efs1#u1vD~>Uk0fCqg6L> z%Mg_jZ&}0c%c~9PhsoKGj@-+jD&pY8#oH}$czc?wy&{L@R?}pdm1aZVaD{53nQqbp)OPBs!`?JXvFBuF5*2h$McO>EdOpfvz#Rz z(~c_&EOPedb=)v|eU(irPAwgUoc@Ro_*fYx$Ns_X<{Q(zJRdAWp{!SMy@D6LfY#|N z{DO1U|3D;d-X6K2S&0_C9VcJCX+cc|O?}F}dV46hsLN#6F?G3Q(24<3!F2CgP~%fN zv0t?yYeTHkB*33p--Lm7i#KIozhG&@ocj)Z$rTOwF|C7q!u_ z!7Ry7>L*}7emk<0Z$|r_0(+>d1=6h^{156Cm!6cXj<17@f=(C36$xJ&CO4c*Lin-F zP00>~@4WB8|LX5bm>-YAb0GinJvwcC0~EFfxLT&M;Ni%Dlcy%6Q?Oc-^e6x7(GA>| z^llJZ&`h`KY5*vUXt|(wZ6BpWCp%mX%%*djYu#cdyAB6prlqjt+4rN*7EVS%~3YKz&^u~H)Fj8c7 zxn6d8vs3+&RBHdD*`>AY!UlA#V*=(Y&_7bL>!lpYdkNpvM|(^7k0sEQGR|n()Kps< z4GB3b!Ei!&<+{zxI*@75I^HVl-M-d)OH_6iNa2@ZV{eo-{`eX_+HQPo*z8Z`G5INN!?Y-_E&k` z_vI;+ee#sbzjsO{XNCVP63@R0M{AN*B1!j6<8|Uzf0q|x!(?qL{96fb{H6)nM=&*# zxeV=O!nTxat;`55-*4?m4MO^IWdt#`lbc#q*aMrHo-$IfN(iOzxBg4;Es!>;Hz(}aMo(4Tf$+YT zJvtK!%Nm1>MUszE<5u-yYde@0#!;MXp&PSyO(`-z(EepIslC+C-k*ejmu8Qggj1^m z^UG>pn+eNRmGHl`5_*sNY6MXA%hhxkc0UzMzeo2@z|_wYrK*|eDhW;#S}TX5hAgfA z|3?>Q|BEVK38;56w5J&`77}efDdOk27!QVhXxtfXVN(z3zNqM1ZH>DnVZYtq_VwAnCzxp5oAuQ7pEwu3w(2MwDT<#o)r(!+47=1gcbr-*x*6MX3 z-Jr*WBlkWJTEp5wPJrGB-=c46F9eHTM*0odz4v)BE_a44TLrIvgM@dDQ-pX#$)J~s z{8K7=5ke!oYA$NjyQMLWx@s@>on)SMHGAD_wxbXK$XK(AX7>MNg0fC%b^Vw*pe7N( z&4?K7cai. For example, if your KeyFile is +// located in the project directory, you would specify the AssemblyKeyFile +// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")] +// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework +// documentation for more information on this. +// +[assembly: AssemblyDelaySign(false)] +[assembly: AssemblyKeyFile("")] +[assembly: AssemblyKeyName("")] diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/ChecksumImpl.cs b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/ChecksumImpl.cs new file mode 100644 index 000000000..788b2fcec --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/ChecksumImpl.cs @@ -0,0 +1,202 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Runtime.InteropServices; +using System.Text; + + +namespace DotZLib +{ + #region ChecksumGeneratorBase + ///

    + /// Implements the common functionality needed for all s + /// + /// + public abstract class ChecksumGeneratorBase : ChecksumGenerator + { + /// + /// The value of the current checksum + /// + protected uint _current; + + /// + /// Initializes a new instance of the checksum generator base - the current checksum is + /// set to zero + /// + public ChecksumGeneratorBase() + { + _current = 0; + } + + /// + /// Initializes a new instance of the checksum generator basewith a specified value + /// + /// The value to set the current checksum to + public ChecksumGeneratorBase(uint initialValue) + { + _current = initialValue; + } + + /// + /// Resets the current checksum to zero + /// + public void Reset() { _current = 0; } + + /// + /// Gets the current checksum value + /// + public uint Value { get { return _current; } } + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + /// All the other Update methods are implmeneted in terms of this one. + /// This is therefore the only method a derived class has to implement + public abstract void Update(byte[] data, int offset, int count); + + /// + /// Updates the current checksum with an array of bytes. + /// + /// The data to update the checksum with + public void Update(byte[] data) + { + Update(data, 0, data.Length); + } + + /// + /// Updates the current checksum with the data from a string + /// + /// The string to update the checksum with + /// The characters in the string are converted by the UTF-8 encoding + public void Update(string data) + { + Update(Encoding.UTF8.GetBytes(data)); + } + + /// + /// Updates the current checksum with the data from a string, using a specific encoding + /// + /// The string to update the checksum with + /// The encoding to use + public void Update(string data, Encoding encoding) + { + Update(encoding.GetBytes(data)); + } + + } + #endregion + + #region CRC32 + /// + /// Implements a CRC32 checksum generator + /// + public sealed class CRC32Checksum : ChecksumGeneratorBase + { + #region DLL imports + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern uint crc32(uint crc, int data, uint length); + + #endregion + + /// + /// Initializes a new instance of the CRC32 checksum generator + /// + public CRC32Checksum() : base() {} + + /// + /// Initializes a new instance of the CRC32 checksum generator with a specified value + /// + /// The value to set the current checksum to + public CRC32Checksum(uint initialValue) : base(initialValue) {} + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + public override void Update(byte[] data, int offset, int count) + { + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned); + try + { + _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count); + } + finally + { + hData.Free(); + } + } + + } + #endregion + + #region Adler + /// + /// Implements a checksum generator that computes the Adler checksum on data + /// + public sealed class AdlerChecksum : ChecksumGeneratorBase + { + #region DLL imports + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern uint adler32(uint adler, int data, uint length); + + #endregion + + /// + /// Initializes a new instance of the Adler checksum generator + /// + public AdlerChecksum() : base() {} + + /// + /// Initializes a new instance of the Adler checksum generator with a specified value + /// + /// The value to set the current checksum to + public AdlerChecksum(uint initialValue) : base(initialValue) {} + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + public override void Update(byte[] data, int offset, int count) + { + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned); + try + { + _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count); + } + finally + { + hData.Free(); + } + } + + } + #endregion + +} \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/CircularBuffer.cs b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/CircularBuffer.cs new file mode 100644 index 000000000..c1cab3a02 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/CircularBuffer.cs @@ -0,0 +1,83 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Diagnostics; + +namespace DotZLib +{ + + /// + /// This class implements a circular buffer + /// + internal class CircularBuffer + { + #region Private data + private int _capacity; + private int _head; + private int _tail; + private int _size; + private byte[] _buffer; + #endregion + + public CircularBuffer(int capacity) + { + Debug.Assert( capacity > 0 ); + _buffer = new byte[capacity]; + _capacity = capacity; + _head = 0; + _tail = 0; + _size = 0; + } + + public int Size { get { return _size; } } + + public int Put(byte[] source, int offset, int count) + { + Debug.Assert( count > 0 ); + int trueCount = Math.Min(count, _capacity - Size); + for (int i = 0; i < trueCount; ++i) + _buffer[(_tail+i) % _capacity] = source[offset+i]; + _tail += trueCount; + _tail %= _capacity; + _size += trueCount; + return trueCount; + } + + public bool Put(byte b) + { + if (Size == _capacity) // no room + return false; + _buffer[_tail++] = b; + _tail %= _capacity; + ++_size; + return true; + } + + public int Get(byte[] destination, int offset, int count) + { + int trueCount = Math.Min(count,Size); + for (int i = 0; i < trueCount; ++i) + destination[offset + i] = _buffer[(_head+i) % _capacity]; + _head += trueCount; + _head %= _capacity; + _size -= trueCount; + return trueCount; + } + + public int Get() + { + if (Size == 0) + return -1; + + int result = (int)_buffer[_head++ % _capacity]; + --_size; + return result; + } + + } +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/CodecBase.cs b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/CodecBase.cs new file mode 100644 index 000000000..42e6da3a5 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/CodecBase.cs @@ -0,0 +1,198 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + /// + /// Implements the common functionality needed for all s + /// + public abstract class CodecBase : Codec, IDisposable + { + + #region Data members + + /// + /// Instance of the internal zlib buffer structure that is + /// passed to all functions in the zlib dll + /// + internal ZStream _ztream = new ZStream(); + + /// + /// True if the object instance has been disposed, false otherwise + /// + protected bool _isDisposed = false; + + /// + /// The size of the internal buffers + /// + protected const int kBufferSize = 16384; + + private byte[] _outBuffer = new byte[kBufferSize]; + private byte[] _inBuffer = new byte[kBufferSize]; + + private GCHandle _hInput; + private GCHandle _hOutput; + + private uint _checksum = 0; + + #endregion + + /// + /// Initializes a new instance of the CodeBase class. + /// + public CodecBase() + { + try + { + _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned); + _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned); + } + catch (Exception) + { + CleanUp(false); + throw; + } + } + + + #region Codec Members + + /// + /// Occurs when more processed data are available. + /// + public event DataAvailableHandler DataAvailable; + + /// + /// Fires the event + /// + protected void OnDataAvailable() + { + if (_ztream.total_out > 0) + { + if (DataAvailable != null) + DataAvailable( _outBuffer, 0, (int)_ztream.total_out); + resetOutput(); + } + } + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// Adding data may, or may not, raise the DataAvailable event + public void Add(byte[] data) + { + Add(data,0,data.Length); + } + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + /// This must be implemented by a derived class + public abstract void Add(byte[] data, int offset, int count); + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + /// This must be implemented by a derived class + public abstract void Finish(); + + /// + /// Gets the checksum of the data that has been added so far + /// + public uint Checksum { get { return _checksum; } } + + #endregion + + #region Destructor & IDisposable stuff + + /// + /// Destroys this instance + /// + ~CodecBase() + { + CleanUp(false); + } + + /// + /// Releases any unmanaged resources and calls the method of the derived class + /// + public void Dispose() + { + CleanUp(true); + } + + /// + /// Performs any codec specific cleanup + /// + /// This must be implemented by a derived class + protected abstract void CleanUp(); + + // performs the release of the handles and calls the dereived CleanUp() + private void CleanUp(bool isDisposing) + { + if (!_isDisposed) + { + CleanUp(); + if (_hInput.IsAllocated) + _hInput.Free(); + if (_hOutput.IsAllocated) + _hOutput.Free(); + + _isDisposed = true; + } + } + + + #endregion + + #region Helper methods + + /// + /// Copies a number of bytes to the internal codec buffer - ready for proccesing + /// + /// The byte array that contains the data to copy + /// The index of the first byte to copy + /// The number of bytes to copy from data + protected void copyInput(byte[] data, int startIndex, int count) + { + Array.Copy(data, startIndex, _inBuffer,0, count); + _ztream.next_in = _hInput.AddrOfPinnedObject(); + _ztream.total_in = 0; + _ztream.avail_in = (uint)count; + + } + + /// + /// Resets the internal output buffers to a known state - ready for processing + /// + protected void resetOutput() + { + _ztream.total_out = 0; + _ztream.avail_out = kBufferSize; + _ztream.next_out = _hOutput.AddrOfPinnedObject(); + } + + /// + /// Updates the running checksum property + /// + /// The new checksum value + protected void setChecksum(uint newSum) + { + _checksum = newSum; + } + #endregion + + } +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/Deflater.cs b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/Deflater.cs new file mode 100644 index 000000000..c2477925b --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/Deflater.cs @@ -0,0 +1,106 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Diagnostics; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + + /// + /// Implements a data compressor, using the deflate algorithm in the ZLib dll + /// + public sealed class Deflater : CodecBase + { + #region Dll imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] + private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int deflate(ref ZStream sz, int flush); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int deflateReset(ref ZStream sz); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int deflateEnd(ref ZStream sz); + #endregion + + /// + /// Constructs an new instance of the Deflater + /// + /// The compression level to use for this Deflater + public Deflater(CompressLevel level) : base() + { + int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream)); + if (retval != 0) + throw new ZLibException(retval, "Could not initialize deflater"); + + resetOutput(); + } + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + public override void Add(byte[] data, int offset, int count) + { + if (data == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + + int total = count; + int inputIndex = offset; + int err = 0; + + while (err >= 0 && inputIndex < total) + { + copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize)); + while (err >= 0 && _ztream.avail_in > 0) + { + err = deflate(ref _ztream, (int)FlushTypes.None); + if (err == 0) + while (_ztream.avail_out == 0) + { + OnDataAvailable(); + err = deflate(ref _ztream, (int)FlushTypes.None); + } + inputIndex += (int)_ztream.total_in; + } + } + setChecksum( _ztream.adler ); + } + + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + public override void Finish() + { + int err; + do + { + err = deflate(ref _ztream, (int)FlushTypes.Finish); + OnDataAvailable(); + } + while (err == 0); + setChecksum( _ztream.adler ); + deflateReset(ref _ztream); + resetOutput(); + } + + /// + /// Closes the internal zlib deflate stream + /// + protected override void CleanUp() { deflateEnd(ref _ztream); } + + } +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.cs b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.cs new file mode 100644 index 000000000..be184b4c7 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.cs @@ -0,0 +1,288 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.IO; +using System.Runtime.InteropServices; +using System.Text; + + +namespace DotZLib +{ + + #region Internal types + + /// + /// Defines constants for the various flush types used with zlib + /// + internal enum FlushTypes + { + None, Partial, Sync, Full, Finish, Block + } + + #region ZStream structure + // internal mapping of the zlib zstream structure for marshalling + [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)] + internal struct ZStream + { + public IntPtr next_in; + public uint avail_in; + public uint total_in; + + public IntPtr next_out; + public uint avail_out; + public uint total_out; + + [MarshalAs(UnmanagedType.LPStr)] + string msg; + uint state; + + uint zalloc; + uint zfree; + uint opaque; + + int data_type; + public uint adler; + uint reserved; + } + + #endregion + + #endregion + + #region Public enums + /// + /// Defines constants for the available compression levels in zlib + /// + public enum CompressLevel : int + { + /// + /// The default compression level with a reasonable compromise between compression and speed + /// + Default = -1, + /// + /// No compression at all. The data are passed straight through. + /// + None = 0, + /// + /// The maximum compression rate available. + /// + Best = 9, + /// + /// The fastest available compression level. + /// + Fastest = 1 + } + #endregion + + #region Exception classes + /// + /// The exception that is thrown when an error occurs on the zlib dll + /// + public class ZLibException : ApplicationException + { + /// + /// Initializes a new instance of the class with a specified + /// error message and error code + /// + /// The zlib error code that caused the exception + /// A message that (hopefully) describes the error + public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg)) + { + } + + /// + /// Initializes a new instance of the class with a specified + /// error code + /// + /// The zlib error code that caused the exception + public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode)) + { + } + } + #endregion + + #region Interfaces + + /// + /// Declares methods and properties that enables a running checksum to be calculated + /// + public interface ChecksumGenerator + { + /// + /// Gets the current value of the checksum + /// + uint Value { get; } + + /// + /// Clears the current checksum to 0 + /// + void Reset(); + + /// + /// Updates the current checksum with an array of bytes + /// + /// The data to update the checksum with + void Update(byte[] data); + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + void Update(byte[] data, int offset, int count); + + /// + /// Updates the current checksum with the data from a string + /// + /// The string to update the checksum with + /// The characters in the string are converted by the UTF-8 encoding + void Update(string data); + + /// + /// Updates the current checksum with the data from a string, using a specific encoding + /// + /// The string to update the checksum with + /// The encoding to use + void Update(string data, Encoding encoding); + } + + + /// + /// Represents the method that will be called from a codec when new data + /// are available. + /// + /// The byte array containing the processed data + /// The index of the first processed byte in data + /// The number of processed bytes available + /// On return from this method, the data may be overwritten, so grab it while you can. + /// You cannot assume that startIndex will be zero. + /// + public delegate void DataAvailableHandler(byte[] data, int startIndex, int count); + + /// + /// Declares methods and events for implementing compressors/decompressors + /// + public interface Codec + { + /// + /// Occurs when more processed data are available. + /// + event DataAvailableHandler DataAvailable; + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// Adding data may, or may not, raise the DataAvailable event + void Add(byte[] data); + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + void Add(byte[] data, int offset, int count); + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + void Finish(); + + /// + /// Gets the checksum of the data that has been added so far + /// + uint Checksum { get; } + + + } + + #endregion + + #region Classes + /// + /// Encapsulates general information about the ZLib library + /// + public class Info + { + #region DLL imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern uint zlibCompileFlags(); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern string zlibVersion(); + #endregion + + #region Private stuff + private uint _flags; + + // helper function that unpacks a bitsize mask + private static int bitSize(uint bits) + { + switch (bits) + { + case 0: return 16; + case 1: return 32; + case 2: return 64; + } + return -1; + } + #endregion + + /// + /// Constructs an instance of the Info class. + /// + public Info() + { + _flags = zlibCompileFlags(); + } + + /// + /// True if the library is compiled with debug info + /// + public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } } + + /// + /// True if the library is compiled with assembly optimizations + /// + public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } } + + /// + /// Gets the size of the unsigned int that was compiled into Zlib + /// + public int SizeOfUInt { get { return bitSize(_flags & 3); } } + + /// + /// Gets the size of the unsigned long that was compiled into Zlib + /// + public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } } + + /// + /// Gets the size of the pointers that were compiled into Zlib + /// + public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } } + + /// + /// Gets the size of the z_off_t type that was compiled into Zlib + /// + public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } } + + /// + /// Gets the version of ZLib as a string, e.g. "1.2.1" + /// + public static string Version { get { return zlibVersion(); } } + } + + #endregion + +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.csproj b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.csproj new file mode 100644 index 000000000..71eeb8590 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.csproj @@ -0,0 +1,141 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/GZipStream.cs b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/GZipStream.cs new file mode 100644 index 000000000..b161300b1 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/GZipStream.cs @@ -0,0 +1,301 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.IO; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + /// + /// Implements a compressed , in GZip (.gz) format. + /// + public class GZipStream : Stream, IDisposable + { + #region Dll Imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] + private static extern IntPtr gzopen(string name, string mode); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzclose(IntPtr gzFile); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzwrite(IntPtr gzFile, int data, int length); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzread(IntPtr gzFile, int data, int length); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzgetc(IntPtr gzFile); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzputc(IntPtr gzFile, int c); + + #endregion + + #region Private data + private IntPtr _gzFile; + private bool _isDisposed = false; + private bool _isWriting; + #endregion + + #region Constructors + /// + /// Creates a new file as a writeable GZipStream + /// + /// The name of the compressed file to create + /// The compression level to use when adding data + /// If an error occurred in the internal zlib function + public GZipStream(string fileName, CompressLevel level) + { + _isWriting = true; + _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level)); + if (_gzFile == IntPtr.Zero) + throw new ZLibException(-1, "Could not open " + fileName); + } + + /// + /// Opens an existing file as a readable GZipStream + /// + /// The name of the file to open + /// If an error occurred in the internal zlib function + public GZipStream(string fileName) + { + _isWriting = false; + _gzFile = gzopen(fileName, "rb"); + if (_gzFile == IntPtr.Zero) + throw new ZLibException(-1, "Could not open " + fileName); + + } + #endregion + + #region Access properties + /// + /// Returns true of this stream can be read from, false otherwise + /// + public override bool CanRead + { + get + { + return !_isWriting; + } + } + + + /// + /// Returns false. + /// + public override bool CanSeek + { + get + { + return false; + } + } + + /// + /// Returns true if this tsream is writeable, false otherwise + /// + public override bool CanWrite + { + get + { + return _isWriting; + } + } + #endregion + + #region Destructor & IDispose stuff + + /// + /// Destroys this instance + /// + ~GZipStream() + { + cleanUp(false); + } + + /// + /// Closes the external file handle + /// + public void Dispose() + { + cleanUp(true); + } + + // Does the actual closing of the file handle. + private void cleanUp(bool isDisposing) + { + if (!_isDisposed) + { + gzclose(_gzFile); + _isDisposed = true; + } + } + #endregion + + #region Basic reading and writing + /// + /// Attempts to read a number of bytes from the stream. + /// + /// The destination data buffer + /// The index of the first destination byte in buffer + /// The number of bytes requested + /// The number of bytes read + /// If buffer is null + /// If count or offset are negative + /// If offset + count is > buffer.Length + /// If this stream is not readable. + /// If this stream has been disposed. + public override int Read(byte[] buffer, int offset, int count) + { + if (!CanRead) throw new NotSupportedException(); + if (buffer == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > buffer.Length) throw new ArgumentException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + + GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned); + int result; + try + { + result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count); + if (result < 0) + throw new IOException(); + } + finally + { + h.Free(); + } + return result; + } + + /// + /// Attempts to read a single byte from the stream. + /// + /// The byte that was read, or -1 in case of error or End-Of-File + public override int ReadByte() + { + if (!CanRead) throw new NotSupportedException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + return gzgetc(_gzFile); + } + + /// + /// Writes a number of bytes to the stream + /// + /// + /// + /// + /// If buffer is null + /// If count or offset are negative + /// If offset + count is > buffer.Length + /// If this stream is not writeable. + /// If this stream has been disposed. + public override void Write(byte[] buffer, int offset, int count) + { + if (!CanWrite) throw new NotSupportedException(); + if (buffer == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > buffer.Length) throw new ArgumentException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + + GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned); + try + { + int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count); + if (result < 0) + throw new IOException(); + } + finally + { + h.Free(); + } + } + + /// + /// Writes a single byte to the stream + /// + /// The byte to add to the stream. + /// If this stream is not writeable. + /// If this stream has been disposed. + public override void WriteByte(byte value) + { + if (!CanWrite) throw new NotSupportedException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + + int result = gzputc(_gzFile, (int)value); + if (result < 0) + throw new IOException(); + } + #endregion + + #region Position & length stuff + /// + /// Not supported. + /// + /// + /// Always thrown + public override void SetLength(long value) + { + throw new NotSupportedException(); + } + + /// + /// Not suppported. + /// + /// + /// + /// + /// Always thrown + public override long Seek(long offset, SeekOrigin origin) + { + throw new NotSupportedException(); + } + + /// + /// Flushes the GZipStream. + /// + /// In this implementation, this method does nothing. This is because excessive + /// flushing may degrade the achievable compression rates. + public override void Flush() + { + // left empty on purpose + } + + /// + /// Gets/sets the current position in the GZipStream. Not suppported. + /// + /// In this implementation this property is not supported + /// Always thrown + public override long Position + { + get + { + throw new NotSupportedException(); + } + set + { + throw new NotSupportedException(); + } + } + + /// + /// Gets the size of the stream. Not suppported. + /// + /// In this implementation this property is not supported + /// Always thrown + public override long Length + { + get + { + throw new NotSupportedException(); + } + } + #endregion + } +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/Inflater.cs b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/Inflater.cs new file mode 100644 index 000000000..8ed5451d6 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/Inflater.cs @@ -0,0 +1,105 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Diagnostics; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + + /// + /// Implements a data decompressor, using the inflate algorithm in the ZLib dll + /// + public class Inflater : CodecBase + { + #region Dll imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] + private static extern int inflateInit_(ref ZStream sz, string vs, int size); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int inflate(ref ZStream sz, int flush); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int inflateReset(ref ZStream sz); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int inflateEnd(ref ZStream sz); + #endregion + + /// + /// Constructs an new instance of the Inflater + /// + public Inflater() : base() + { + int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream)); + if (retval != 0) + throw new ZLibException(retval, "Could not initialize inflater"); + + resetOutput(); + } + + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + public override void Add(byte[] data, int offset, int count) + { + if (data == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + + int total = count; + int inputIndex = offset; + int err = 0; + + while (err >= 0 && inputIndex < total) + { + copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize)); + err = inflate(ref _ztream, (int)FlushTypes.None); + if (err == 0) + while (_ztream.avail_out == 0) + { + OnDataAvailable(); + err = inflate(ref _ztream, (int)FlushTypes.None); + } + + inputIndex += (int)_ztream.total_in; + } + setChecksum( _ztream.adler ); + } + + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + public override void Finish() + { + int err; + do + { + err = inflate(ref _ztream, (int)FlushTypes.Finish); + OnDataAvailable(); + } + while (err == 0); + setChecksum( _ztream.adler ); + inflateReset(ref _ztream); + resetOutput(); + } + + /// + /// Closes the internal zlib inflate stream + /// + protected override void CleanUp() { inflateEnd(ref _ztream); } + + + } +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/UnitTests.cs b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/UnitTests.cs new file mode 100644 index 000000000..b273d54b3 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/DotZLib/UnitTests.cs @@ -0,0 +1,274 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Collections; +using System.IO; + +// uncomment the define below to include unit tests +//#define nunit +#if nunit +using NUnit.Framework; + +// Unit tests for the DotZLib class library +// ---------------------------------------- +// +// Use this with NUnit 2 from http://www.nunit.org +// + +namespace DotZLibTests +{ + using DotZLib; + + // helper methods + internal class Utils + { + public static bool byteArrEqual( byte[] lhs, byte[] rhs ) + { + if (lhs.Length != rhs.Length) + return false; + for (int i = lhs.Length-1; i >= 0; --i) + if (lhs[i] != rhs[i]) + return false; + return true; + } + + } + + + [TestFixture] + public class CircBufferTests + { + #region Circular buffer tests + [Test] + public void SinglePutGet() + { + CircularBuffer buf = new CircularBuffer(10); + Assert.AreEqual( 0, buf.Size ); + Assert.AreEqual( -1, buf.Get() ); + + Assert.IsTrue(buf.Put( 1 )); + Assert.AreEqual( 1, buf.Size ); + Assert.AreEqual( 1, buf.Get() ); + Assert.AreEqual( 0, buf.Size ); + Assert.AreEqual( -1, buf.Get() ); + } + + [Test] + public void BlockPutGet() + { + CircularBuffer buf = new CircularBuffer(10); + byte[] arr = {1,2,3,4,5,6,7,8,9,10}; + Assert.AreEqual( 10, buf.Put(arr,0,10) ); + Assert.AreEqual( 10, buf.Size ); + Assert.IsFalse( buf.Put(11) ); + Assert.AreEqual( 1, buf.Get() ); + Assert.IsTrue( buf.Put(11) ); + + byte[] arr2 = (byte[])arr.Clone(); + Assert.AreEqual( 9, buf.Get(arr2,1,9) ); + Assert.IsTrue( Utils.byteArrEqual(arr,arr2) ); + } + + #endregion + } + + [TestFixture] + public class ChecksumTests + { + #region CRC32 Tests + [Test] + public void CRC32_Null() + { + CRC32Checksum crc32 = new CRC32Checksum(); + Assert.AreEqual( 0, crc32.Value ); + + crc32 = new CRC32Checksum(1); + Assert.AreEqual( 1, crc32.Value ); + + crc32 = new CRC32Checksum(556); + Assert.AreEqual( 556, crc32.Value ); + } + + [Test] + public void CRC32_Data() + { + CRC32Checksum crc32 = new CRC32Checksum(); + byte[] data = { 1,2,3,4,5,6,7 }; + crc32.Update(data); + Assert.AreEqual( 0x70e46888, crc32.Value ); + + crc32 = new CRC32Checksum(); + crc32.Update("penguin"); + Assert.AreEqual( 0x0e5c1a120, crc32.Value ); + + crc32 = new CRC32Checksum(1); + crc32.Update("penguin"); + Assert.AreEqual(0x43b6aa94, crc32.Value); + + } + #endregion + + #region Adler tests + + [Test] + public void Adler_Null() + { + AdlerChecksum adler = new AdlerChecksum(); + Assert.AreEqual(0, adler.Value); + + adler = new AdlerChecksum(1); + Assert.AreEqual( 1, adler.Value ); + + adler = new AdlerChecksum(556); + Assert.AreEqual( 556, adler.Value ); + } + + [Test] + public void Adler_Data() + { + AdlerChecksum adler = new AdlerChecksum(1); + byte[] data = { 1,2,3,4,5,6,7 }; + adler.Update(data); + Assert.AreEqual( 0x5b001d, adler.Value ); + + adler = new AdlerChecksum(); + adler.Update("penguin"); + Assert.AreEqual(0x0bcf02f6, adler.Value ); + + adler = new AdlerChecksum(1); + adler.Update("penguin"); + Assert.AreEqual(0x0bd602f7, adler.Value); + + } + #endregion + } + + [TestFixture] + public class InfoTests + { + #region Info tests + [Test] + public void Info_Version() + { + Info info = new Info(); + Assert.AreEqual("1.2.8", Info.Version); + Assert.AreEqual(32, info.SizeOfUInt); + Assert.AreEqual(32, info.SizeOfULong); + Assert.AreEqual(32, info.SizeOfPointer); + Assert.AreEqual(32, info.SizeOfOffset); + } + #endregion + } + + [TestFixture] + public class DeflateInflateTests + { + #region Deflate tests + [Test] + public void Deflate_Init() + { + using (Deflater def = new Deflater(CompressLevel.Default)) + { + } + } + + private ArrayList compressedData = new ArrayList(); + private uint adler1; + + private ArrayList uncompressedData = new ArrayList(); + private uint adler2; + + public void CDataAvail(byte[] data, int startIndex, int count) + { + for (int i = 0; i < count; ++i) + compressedData.Add(data[i+startIndex]); + } + + [Test] + public void Deflate_Compress() + { + compressedData.Clear(); + + byte[] testData = new byte[35000]; + for (int i = 0; i < testData.Length; ++i) + testData[i] = 5; + + using (Deflater def = new Deflater((CompressLevel)5)) + { + def.DataAvailable += new DataAvailableHandler(CDataAvail); + def.Add(testData); + def.Finish(); + adler1 = def.Checksum; + } + } + #endregion + + #region Inflate tests + [Test] + public void Inflate_Init() + { + using (Inflater inf = new Inflater()) + { + } + } + + private void DDataAvail(byte[] data, int startIndex, int count) + { + for (int i = 0; i < count; ++i) + uncompressedData.Add(data[i+startIndex]); + } + + [Test] + public void Inflate_Expand() + { + uncompressedData.Clear(); + + using (Inflater inf = new Inflater()) + { + inf.DataAvailable += new DataAvailableHandler(DDataAvail); + inf.Add((byte[])compressedData.ToArray(typeof(byte))); + inf.Finish(); + adler2 = inf.Checksum; + } + Assert.AreEqual( adler1, adler2 ); + } + #endregion + } + + [TestFixture] + public class GZipStreamTests + { + #region GZipStream test + [Test] + public void GZipStream_WriteRead() + { + using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best)) + { + BinaryWriter writer = new BinaryWriter(gzOut); + writer.Write("hi there"); + writer.Write(Math.PI); + writer.Write(42); + } + + using (GZipStream gzIn = new GZipStream("gzstream.gz")) + { + BinaryReader reader = new BinaryReader(gzIn); + string s = reader.ReadString(); + Assert.AreEqual("hi there",s); + double d = reader.ReadDouble(); + Assert.AreEqual(Math.PI, d); + int i = reader.ReadInt32(); + Assert.AreEqual(42,i); + } + + } + #endregion + } +} + +#endif diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/LICENSE_1_0.txt b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/LICENSE_1_0.txt new file mode 100644 index 000000000..30aac2cf4 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/LICENSE_1_0.txt @@ -0,0 +1,23 @@ +Boost Software License - Version 1.0 - August 17th, 2003 + +Permission is hereby granted, free of charge, to any person or organization +obtaining a copy of the software and accompanying documentation covered by +this license (the "Software") to use, reproduce, display, distribute, +execute, and transmit the Software, and to prepare derivative works of the +Software, and to permit third-parties to whom the Software is furnished to +do so, all subject to the following: + +The copyright notices in the Software and this entire statement, including +the above license grant, this restriction and the following disclaimer, +must be included in all copies of the Software, in whole or in part, and +all derivative works of the Software, unless such copies or derivative +works are solely in the form of machine-executable object code generated by +a source language processor. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT +SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE +FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS IN THE SOFTWARE. \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/readme.txt b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/readme.txt new file mode 100644 index 000000000..b2395720d --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/dotzlib/readme.txt @@ -0,0 +1,58 @@ +This directory contains a .Net wrapper class library for the ZLib1.dll + +The wrapper includes support for inflating/deflating memory buffers, +.Net streaming wrappers for the gz streams part of zlib, and wrappers +for the checksum parts of zlib. See DotZLib/UnitTests.cs for examples. + +Directory structure: +-------------------- + +LICENSE_1_0.txt - License file. +readme.txt - This file. +DotZLib.chm - Class library documentation +DotZLib.build - NAnt build file +DotZLib.sln - Microsoft Visual Studio 2003 solution file + +DotZLib\*.cs - Source files for the class library + +Unit tests: +----------- +The file DotZLib/UnitTests.cs contains unit tests for use with NUnit 2.1 or higher. +To include unit tests in the build, define nunit before building. + + +Build instructions: +------------------- + +1. Using Visual Studio.Net 2003: + Open DotZLib.sln in VS.Net and build from there. Output file (DotZLib.dll) + will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on + you are building the release or debug version of the library. Check + DotZLib/UnitTests.cs for instructions on how to include unit tests in the + build. + +2. Using NAnt: + Open a command prompt with access to the build environment and run nant + in the same directory as the DotZLib.build file. + You can define 2 properties on the nant command-line to control the build: + debug={true|false} to toggle between release/debug builds (default=true). + nunit={true|false} to include or esclude unit tests (default=true). + Also the target clean will remove binaries. + Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release + or ./DotZLib/bin/debug, depending on whether you are building the release + or debug version of the library. + + Examples: + nant -D:debug=false -D:nunit=false + will build a release mode version of the library without unit tests. + nant + will build a debug version of the library with unit tests + nant clean + will remove all previously built files. + + +--------------------------------- +Copyright (c) Henrik Ravn 2004 + +Use, modification and distribution are subject to the Boost Software License, Version 1.0. +(See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) diff --git a/src/SDL2/external/zlib-1.2.8/contrib/gcc_gvmat64/gvmat64.S b/src/SDL2/external/zlib-1.2.8/contrib/gcc_gvmat64/gvmat64.S new file mode 100644 index 000000000..dd858ddbd --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/gcc_gvmat64/gvmat64.S @@ -0,0 +1,574 @@ +/* +;uInt longest_match_x64( +; deflate_state *s, +; IPos cur_match); // current match + +; gvmat64.S -- Asm portion of the optimized longest_match for 32 bits x86_64 +; (AMD64 on Athlon 64, Opteron, Phenom +; and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7) +; this file is translation from gvmat64.asm to GCC 4.x (for Linux, Mac XCode) +; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant. +; +; File written by Gilles Vollant, by converting to assembly the longest_match +; from Jean-loup Gailly in deflate.c of zLib and infoZip zip. +; and by taking inspiration on asm686 with masm, optimised assembly code +; from Brian Raiter, written 1998 +; +; This software is provided 'as-is', without any express or implied +; warranty. In no event will the authors be held liable for any damages +; arising from the use of this software. +; +; Permission is granted to anyone to use this software for any purpose, +; including commercial applications, and to alter it and redistribute it +; freely, subject to the following restrictions: +; +; 1. The origin of this software must not be misrepresented; you must not +; claim that you wrote the original software. If you use this software +; in a product, an acknowledgment in the product documentation would be +; appreciated but is not required. +; 2. Altered source versions must be plainly marked as such, and must not be +; misrepresented as being the original software +; 3. This notice may not be removed or altered from any source distribution. +; +; http://www.zlib.net +; http://www.winimage.com/zLibDll +; http://www.muppetlabs.com/~breadbox/software/assembly.html +; +; to compile this file for zLib, I use option: +; gcc -c -arch x86_64 gvmat64.S + + +;uInt longest_match(s, cur_match) +; deflate_state *s; +; IPos cur_match; // current match / +; +; with XCode for Mac, I had strange error with some jump on intel syntax +; this is why BEFORE_JMP and AFTER_JMP are used + */ + + +#define BEFORE_JMP .att_syntax +#define AFTER_JMP .intel_syntax noprefix + +#ifndef NO_UNDERLINE +# define match_init _match_init +# define longest_match _longest_match +#endif + +.intel_syntax noprefix + +.globl match_init, longest_match +.text +longest_match: + + + +#define LocalVarsSize 96 +/* +; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12 +; free register : r14,r15 +; register can be saved : rsp +*/ + +#define chainlenwmask (rsp + 8 - LocalVarsSize) +#define nicematch (rsp + 16 - LocalVarsSize) + +#define save_rdi (rsp + 24 - LocalVarsSize) +#define save_rsi (rsp + 32 - LocalVarsSize) +#define save_rbx (rsp + 40 - LocalVarsSize) +#define save_rbp (rsp + 48 - LocalVarsSize) +#define save_r12 (rsp + 56 - LocalVarsSize) +#define save_r13 (rsp + 64 - LocalVarsSize) +#define save_r14 (rsp + 72 - LocalVarsSize) +#define save_r15 (rsp + 80 - LocalVarsSize) + + +/* +; all the +4 offsets are due to the addition of pending_buf_size (in zlib +; in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, remove the +4). +; Note : these value are good with a 8 bytes boundary pack structure +*/ + +#define MAX_MATCH 258 +#define MIN_MATCH 3 +#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) + +/* +;;; Offsets for fields in the deflate_state structure. These numbers +;;; are calculated from the definition of deflate_state, with the +;;; assumption that the compiler will dword-align the fields. (Thus, +;;; changing the definition of deflate_state could easily cause this +;;; program to crash horribly, without so much as a warning at +;;; compile time. Sigh.) + +; all the +zlib1222add offsets are due to the addition of fields +; in zlib in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). +; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). +; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). +*/ + + + +/* you can check the structure offset by running + +#include +#include +#include "deflate.h" + +void print_depl() +{ +deflate_state ds; +deflate_state *s=&ds; +printf("size pointer=%u\n",(int)sizeof(void*)); + +printf("#define dsWSize %u\n",(int)(((char*)&(s->w_size))-((char*)s))); +printf("#define dsWMask %u\n",(int)(((char*)&(s->w_mask))-((char*)s))); +printf("#define dsWindow %u\n",(int)(((char*)&(s->window))-((char*)s))); +printf("#define dsPrev %u\n",(int)(((char*)&(s->prev))-((char*)s))); +printf("#define dsMatchLen %u\n",(int)(((char*)&(s->match_length))-((char*)s))); +printf("#define dsPrevMatch %u\n",(int)(((char*)&(s->prev_match))-((char*)s))); +printf("#define dsStrStart %u\n",(int)(((char*)&(s->strstart))-((char*)s))); +printf("#define dsMatchStart %u\n",(int)(((char*)&(s->match_start))-((char*)s))); +printf("#define dsLookahead %u\n",(int)(((char*)&(s->lookahead))-((char*)s))); +printf("#define dsPrevLen %u\n",(int)(((char*)&(s->prev_length))-((char*)s))); +printf("#define dsMaxChainLen %u\n",(int)(((char*)&(s->max_chain_length))-((char*)s))); +printf("#define dsGoodMatch %u\n",(int)(((char*)&(s->good_match))-((char*)s))); +printf("#define dsNiceMatch %u\n",(int)(((char*)&(s->nice_match))-((char*)s))); +} +*/ + +#define dsWSize 68 +#define dsWMask 76 +#define dsWindow 80 +#define dsPrev 96 +#define dsMatchLen 144 +#define dsPrevMatch 148 +#define dsStrStart 156 +#define dsMatchStart 160 +#define dsLookahead 164 +#define dsPrevLen 168 +#define dsMaxChainLen 172 +#define dsGoodMatch 188 +#define dsNiceMatch 192 + +#define window_size [ rcx + dsWSize] +#define WMask [ rcx + dsWMask] +#define window_ad [ rcx + dsWindow] +#define prev_ad [ rcx + dsPrev] +#define strstart [ rcx + dsStrStart] +#define match_start [ rcx + dsMatchStart] +#define Lookahead [ rcx + dsLookahead] //; 0ffffffffh on infozip +#define prev_length [ rcx + dsPrevLen] +#define max_chain_length [ rcx + dsMaxChainLen] +#define good_match [ rcx + dsGoodMatch] +#define nice_match [ rcx + dsNiceMatch] + +/* +; windows: +; parameter 1 in rcx(deflate state s), param 2 in rdx (cur match) + +; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and +; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp +; +; All registers must be preserved across the call, except for +; rax, rcx, rdx, r8, r9, r10, and r11, which are scratch. + +; +; gcc on macosx-linux: +; see http://www.x86-64.org/documentation/abi-0.99.pdf +; param 1 in rdi, param 2 in rsi +; rbx, rsp, rbp, r12 to r15 must be preserved + +;;; Save registers that the compiler may be using, and adjust esp to +;;; make room for our stack frame. + + +;;; Retrieve the function arguments. r8d will hold cur_match +;;; throughout the entire function. edx will hold the pointer to the +;;; deflate_state structure during the function's setup (before +;;; entering the main loop. + +; ms: parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match) +; mac: param 1 in rdi, param 2 rsi +; this clear high 32 bits of r8, which can be garbage in both r8 and rdx +*/ + mov [save_rbx],rbx + mov [save_rbp],rbp + + + mov rcx,rdi + + mov r8d,esi + + + mov [save_r12],r12 + mov [save_r13],r13 + mov [save_r14],r14 + mov [save_r15],r15 + + +//;;; uInt wmask = s->w_mask; +//;;; unsigned chain_length = s->max_chain_length; +//;;; if (s->prev_length >= s->good_match) { +//;;; chain_length >>= 2; +//;;; } + + + mov edi, prev_length + mov esi, good_match + mov eax, WMask + mov ebx, max_chain_length + cmp edi, esi + jl LastMatchGood + shr ebx, 2 +LastMatchGood: + +//;;; chainlen is decremented once beforehand so that the function can +//;;; use the sign flag instead of the zero flag for the exit test. +//;;; It is then shifted into the high word, to make room for the wmask +//;;; value, which it will always accompany. + + dec ebx + shl ebx, 16 + or ebx, eax + +//;;; on zlib only +//;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + + + + mov eax, nice_match + mov [chainlenwmask], ebx + mov r10d, Lookahead + cmp r10d, eax + cmovnl r10d, eax + mov [nicematch],r10d + + + +//;;; register Bytef *scan = s->window + s->strstart; + mov r10, window_ad + mov ebp, strstart + lea r13, [r10 + rbp] + +//;;; Determine how many bytes the scan ptr is off from being +//;;; dword-aligned. + + mov r9,r13 + neg r13 + and r13,3 + +//;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ? +//;;; s->strstart - (IPos)MAX_DIST(s) : NIL; + + + mov eax, window_size + sub eax, MIN_LOOKAHEAD + + + xor edi,edi + sub ebp, eax + + mov r11d, prev_length + + cmovng ebp,edi + +//;;; int best_len = s->prev_length; + + +//;;; Store the sum of s->window + best_len in esi locally, and in esi. + + lea rsi,[r10+r11] + +//;;; register ush scan_start = *(ushf*)scan; +//;;; register ush scan_end = *(ushf*)(scan+best_len-1); +//;;; Posf *prev = s->prev; + + movzx r12d,word ptr [r9] + movzx ebx, word ptr [r9 + r11 - 1] + + mov rdi, prev_ad + +//;;; Jump into the main loop. + + mov edx, [chainlenwmask] + + cmp bx,word ptr [rsi + r8 - 1] + jz LookupLoopIsZero + + + +LookupLoop1: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + + + + sub edx, 0x00010000 + BEFORE_JMP + js LeaveNow + AFTER_JMP + +LoopEntry1: + cmp bx,word ptr [rsi + r8 - 1] + BEFORE_JMP + jz LookupLoopIsZero + AFTER_JMP + +LookupLoop2: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + BEFORE_JMP + jbe LeaveNow + AFTER_JMP + sub edx, 0x00010000 + BEFORE_JMP + js LeaveNow + AFTER_JMP + +LoopEntry2: + cmp bx,word ptr [rsi + r8 - 1] + BEFORE_JMP + jz LookupLoopIsZero + AFTER_JMP + +LookupLoop4: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + BEFORE_JMP + jbe LeaveNow + AFTER_JMP + sub edx, 0x00010000 + BEFORE_JMP + js LeaveNow + AFTER_JMP + +LoopEntry4: + + cmp bx,word ptr [rsi + r8 - 1] + BEFORE_JMP + jnz LookupLoop1 + jmp LookupLoopIsZero + AFTER_JMP +/* +;;; do { +;;; match = s->window + cur_match; +;;; if (*(ushf*)(match+best_len-1) != scan_end || +;;; *(ushf*)match != scan_start) continue; +;;; [...] +;;; } while ((cur_match = prev[cur_match & wmask]) > limit +;;; && --chain_length != 0); +;;; +;;; Here is the inner loop of the function. The function will spend the +;;; majority of its time in this loop, and majority of that time will +;;; be spent in the first ten instructions. +;;; +;;; Within this loop: +;;; ebx = scanend +;;; r8d = curmatch +;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) +;;; esi = windowbestlen - i.e., (window + bestlen) +;;; edi = prev +;;; ebp = limit +*/ +.balign 16 +LookupLoop: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + BEFORE_JMP + jbe LeaveNow + AFTER_JMP + sub edx, 0x00010000 + BEFORE_JMP + js LeaveNow + AFTER_JMP + +LoopEntry: + + cmp bx,word ptr [rsi + r8 - 1] + BEFORE_JMP + jnz LookupLoop1 + AFTER_JMP +LookupLoopIsZero: + cmp r12w, word ptr [r10 + r8] + BEFORE_JMP + jnz LookupLoop1 + AFTER_JMP + + +//;;; Store the current value of chainlen. + mov [chainlenwmask], edx +/* +;;; Point edi to the string under scrutiny, and esi to the string we +;;; are hoping to match it up with. In actuality, esi and edi are +;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is +;;; initialized to -(MAX_MATCH_8 - scanalign). +*/ + lea rsi,[r8+r10] + mov rdx, 0xfffffffffffffef8 //; -(MAX_MATCH_8) + lea rsi, [rsi + r13 + 0x0108] //;MAX_MATCH_8] + lea rdi, [r9 + r13 + 0x0108] //;MAX_MATCH_8] + + prefetcht1 [rsi+rdx] + prefetcht1 [rdi+rdx] + +/* +;;; Test the strings for equality, 8 bytes at a time. At the end, +;;; adjust rdx so that it is offset to the exact byte that mismatched. +;;; +;;; We already know at this point that the first three bytes of the +;;; strings match each other, and they can be safely passed over before +;;; starting the compare loop. So what this code does is skip over 0-3 +;;; bytes, as much as necessary in order to dword-align the edi +;;; pointer. (rsi will still be misaligned three times out of four.) +;;; +;;; It should be confessed that this loop usually does not represent +;;; much of the total running time. Replacing it with a more +;;; straightforward "rep cmpsb" would not drastically degrade +;;; performance. +*/ + +LoopCmps: + mov rax, [rsi + rdx] + xor rax, [rdi + rdx] + jnz LeaveLoopCmps + + mov rax, [rsi + rdx + 8] + xor rax, [rdi + rdx + 8] + jnz LeaveLoopCmps8 + + + mov rax, [rsi + rdx + 8+8] + xor rax, [rdi + rdx + 8+8] + jnz LeaveLoopCmps16 + + add rdx,8+8+8 + + BEFORE_JMP + jnz LoopCmps + jmp LenMaximum + AFTER_JMP + +LeaveLoopCmps16: add rdx,8 +LeaveLoopCmps8: add rdx,8 +LeaveLoopCmps: + + test eax, 0x0000FFFF + jnz LenLower + + test eax,0xffffffff + + jnz LenLower32 + + add rdx,4 + shr rax,32 + or ax,ax + BEFORE_JMP + jnz LenLower + AFTER_JMP + +LenLower32: + shr eax,16 + add rdx,2 + +LenLower: + sub al, 1 + adc rdx, 0 +//;;; Calculate the length of the match. If it is longer than MAX_MATCH, +//;;; then automatically accept it as the best possible match and leave. + + lea rax, [rdi + rdx] + sub rax, r9 + cmp eax, MAX_MATCH + BEFORE_JMP + jge LenMaximum + AFTER_JMP +/* +;;; If the length of the match is not longer than the best match we +;;; have so far, then forget it and return to the lookup loop. +;/////////////////////////////////// +*/ + cmp eax, r11d + jg LongerMatch + + lea rsi,[r10+r11] + + mov rdi, prev_ad + mov edx, [chainlenwmask] + BEFORE_JMP + jmp LookupLoop + AFTER_JMP +/* +;;; s->match_start = cur_match; +;;; best_len = len; +;;; if (len >= nice_match) break; +;;; scan_end = *(ushf*)(scan+best_len-1); +*/ +LongerMatch: + mov r11d, eax + mov match_start, r8d + cmp eax, [nicematch] + BEFORE_JMP + jge LeaveNow + AFTER_JMP + + lea rsi,[r10+rax] + + movzx ebx, word ptr [r9 + rax - 1] + mov rdi, prev_ad + mov edx, [chainlenwmask] + BEFORE_JMP + jmp LookupLoop + AFTER_JMP + +//;;; Accept the current string, with the maximum possible length. + +LenMaximum: + mov r11d,MAX_MATCH + mov match_start, r8d + +//;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len; +//;;; return s->lookahead; + +LeaveNow: + mov eax, Lookahead + cmp r11d, eax + cmovng eax, r11d + + + +//;;; Restore the stack and return from whence we came. + + +// mov rsi,[save_rsi] +// mov rdi,[save_rdi] + mov rbx,[save_rbx] + mov rbp,[save_rbp] + mov r12,[save_r12] + mov r13,[save_r13] + mov r14,[save_r14] + mov r15,[save_r15] + + + ret 0 +//; please don't remove this string ! +//; Your can freely use gvmat64 in any free or commercial app +//; but it is far better don't remove the string in the binary! + // db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0 + + +match_init: + ret 0 + + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/infback9/README b/src/SDL2/external/zlib-1.2.8/contrib/infback9/README new file mode 100644 index 000000000..e75ed1329 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/infback9/README @@ -0,0 +1 @@ +See infback9.h for what this is and how to use it. diff --git a/src/SDL2/external/zlib-1.2.8/contrib/infback9/infback9.c b/src/SDL2/external/zlib-1.2.8/contrib/infback9/infback9.c new file mode 100644 index 000000000..05fb3e338 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/infback9/infback9.c @@ -0,0 +1,615 @@ +/* infback9.c -- inflate deflate64 data using a call-back interface + * Copyright (C) 1995-2008 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "infback9.h" +#include "inftree9.h" +#include "inflate9.h" + +#define WSIZE 65536UL + +/* + strm provides memory allocation functions in zalloc and zfree, or + Z_NULL to use the library memory allocation functions. + + window is a user-supplied window and output buffer that is 64K bytes. + */ +int ZEXPORT inflateBack9Init_(strm, window, version, stream_size) +z_stream FAR *strm; +unsigned char FAR *window; +const char *version; +int stream_size; +{ + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL || window == Z_NULL) + return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; + } + if (strm->zfree == (free_func)0) strm->zfree = zcfree; + state = (struct inflate_state FAR *)ZALLOC(strm, 1, + sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (voidpf)state; + state->window = window; + return Z_OK; +} + +/* + Build and output length and distance decoding tables for fixed code + decoding. + */ +#ifdef MAKEFIXED +#include + +void makefixed9(void) +{ + unsigned sym, bits, low, size; + code *next, *lenfix, *distfix; + struct inflate_state state; + code fixed[544]; + + /* literal/length table */ + sym = 0; + while (sym < 144) state.lens[sym++] = 8; + while (sym < 256) state.lens[sym++] = 9; + while (sym < 280) state.lens[sym++] = 7; + while (sym < 288) state.lens[sym++] = 8; + next = fixed; + lenfix = next; + bits = 9; + inflate_table9(LENS, state.lens, 288, &(next), &(bits), state.work); + + /* distance table */ + sym = 0; + while (sym < 32) state.lens[sym++] = 5; + distfix = next; + bits = 5; + inflate_table9(DISTS, state.lens, 32, &(next), &(bits), state.work); + + /* write tables */ + puts(" /* inffix9.h -- table for decoding deflate64 fixed codes"); + puts(" * Generated automatically by makefixed9()."); + puts(" */"); + puts(""); + puts(" /* WARNING: this file should *not* be used by applications."); + puts(" It is part of the implementation of this library and is"); + puts(" subject to change. Applications should only use zlib.h."); + puts(" */"); + puts(""); + size = 1U << 9; + printf(" static const code lenfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 6) == 0) printf("\n "); + printf("{%u,%u,%d}", lenfix[low].op, lenfix[low].bits, + lenfix[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); + size = 1U << 5; + printf("\n static const code distfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 5) == 0) printf("\n "); + printf("{%u,%u,%d}", distfix[low].op, distfix[low].bits, + distfix[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); +} +#endif /* MAKEFIXED */ + +/* Macros for inflateBack(): */ + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Assure that some input is available. If input is requested, but denied, + then return a Z_BUF_ERROR from inflateBack(). */ +#define PULL() \ + do { \ + if (have == 0) { \ + have = in(in_desc, &next); \ + if (have == 0) { \ + next = Z_NULL; \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflateBack() + with an error if there is no input available. */ +#define PULLBYTE() \ + do { \ + PULL(); \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflateBack() with + an error. */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n <= 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Assure that some output space is available, by writing out the window + if it's full. If the write fails, return from inflateBack() with a + Z_BUF_ERROR. */ +#define ROOM() \ + do { \ + if (left == 0) { \ + put = window; \ + left = WSIZE; \ + wrap = 1; \ + if (out(out_desc, put, (unsigned)left)) { \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* + strm provides the memory allocation functions and window buffer on input, + and provides information on the unused input on return. For Z_DATA_ERROR + returns, strm will also provide an error message. + + in() and out() are the call-back input and output functions. When + inflateBack() needs more input, it calls in(). When inflateBack() has + filled the window with output, or when it completes with data in the + window, it calls out() to write out the data. The application must not + change the provided input until in() is called again or inflateBack() + returns. The application must not change the window/output buffer until + inflateBack() returns. + + in() and out() are called with a descriptor parameter provided in the + inflateBack() call. This parameter can be a structure that provides the + information required to do the read or write, as well as accumulated + information on the input and output such as totals and check values. + + in() should return zero on failure. out() should return non-zero on + failure. If either in() or out() fails, than inflateBack() returns a + Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it + was in() or out() that caused in the error. Otherwise, inflateBack() + returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format + error, or Z_MEM_ERROR if it could not allocate memory for the state. + inflateBack() can also return Z_STREAM_ERROR if the input parameters + are not correct, i.e. strm is Z_NULL or the state was not initialized. + */ +int ZEXPORT inflateBack9(strm, in, in_desc, out, out_desc) +z_stream FAR *strm; +in_func in; +void FAR *in_desc; +out_func out; +void FAR *out_desc; +{ + struct inflate_state FAR *state; + z_const unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have; /* available input */ + unsigned long left; /* available output */ + inflate_mode mode; /* current inflate mode */ + int lastblock; /* true if processing last block */ + int wrap; /* true if the window has wrapped */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned extra; /* extra bits needed */ + unsigned long length; /* literal or length of data to copy */ + unsigned long offset; /* distance back to copy string from */ + unsigned long copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code const FAR *lencode; /* starting table for length/literal codes */ + code const FAR *distcode; /* starting table for distance codes */ + unsigned lenbits; /* index bits for lencode */ + unsigned distbits; /* index bits for distcode */ + code here; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; +#include "inffix9.h" + + /* Check that the strm exists and that the state was initialized */ + if (strm == Z_NULL || strm->state == Z_NULL) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* Reset the state */ + strm->msg = Z_NULL; + mode = TYPE; + lastblock = 0; + wrap = 0; + window = state->window; + next = strm->next_in; + have = next != Z_NULL ? strm->avail_in : 0; + hold = 0; + bits = 0; + put = window; + left = WSIZE; + lencode = Z_NULL; + distcode = Z_NULL; + + /* Inflate until end of block marked as last */ + for (;;) + switch (mode) { + case TYPE: + /* determine and dispatch block type */ + if (lastblock) { + BYTEBITS(); + mode = DONE; + break; + } + NEEDBITS(3); + lastblock = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + lastblock ? " (last)" : "")); + mode = STORED; + break; + case 1: /* fixed block */ + lencode = lenfix; + lenbits = 9; + distcode = distfix; + distbits = 5; + Tracev((stderr, "inflate: fixed codes block%s\n", + lastblock ? " (last)" : "")); + mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + lastblock ? " (last)" : "")); + mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + mode = BAD; + } + DROPBITS(2); + break; + + case STORED: + /* get and verify stored block length */ + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + mode = BAD; + break; + } + length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %lu\n", + length)); + INITBITS(); + + /* copy stored block from input to output */ + while (length != 0) { + copy = length; + PULL(); + ROOM(); + if (copy > have) copy = have; + if (copy > left) copy = left; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + length -= copy; + } + Tracev((stderr, "inflate: stored end\n")); + mode = TYPE; + break; + + case TABLE: + /* get dynamic table entries descriptor */ + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); + if (state->nlen > 286) { + strm->msg = (char *)"too many length symbols"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: table sizes ok\n")); + + /* get code length code lengths (not a typo) */ + state->have = 0; + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + lencode = (code const FAR *)(state->next); + lenbits = 7; + ret = inflate_table9(CODES, state->lens, 19, &(state->next), + &(lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + + /* get length and distance code code lengths */ + state->have = 0; + while (state->have < state->nlen + state->ndist) { + for (;;) { + here = lencode[BITS(lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.val < 16) { + NEEDBITS(here.bits); + DROPBITS(here.bits); + state->lens[state->have++] = here.val; + } + else { + if (here.val == 16) { + NEEDBITS(here.bits + 2); + DROPBITS(here.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + mode = BAD; + break; + } + len = (unsigned)(state->lens[state->have - 1]); + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (here.val == 17) { + NEEDBITS(here.bits + 3); + DROPBITS(here.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(here.bits + 7); + DROPBITS(here.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (mode == BAD) break; + + /* check for end-of-block code (better have one) */ + if (state->lens[256] == 0) { + strm->msg = (char *)"invalid code -- missing end-of-block"; + mode = BAD; + break; + } + + /* build code tables -- note: do not change the lenbits or distbits + values here (9 and 6) without reading the comments in inftree9.h + concerning the ENOUGH constants, which depend on those values */ + state->next = state->codes; + lencode = (code const FAR *)(state->next); + lenbits = 9; + ret = inflate_table9(LENS, state->lens, state->nlen, + &(state->next), &(lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + mode = BAD; + break; + } + distcode = (code const FAR *)(state->next); + distbits = 6; + ret = inflate_table9(DISTS, state->lens + state->nlen, + state->ndist, &(state->next), &(distbits), + state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + mode = LEN; + + case LEN: + /* get a literal, length, or end-of-block code */ + for (;;) { + here = lencode[BITS(lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.op && (here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + length = (unsigned)here.val; + + /* process literal */ + if (here.op == 0) { + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); + ROOM(); + *put++ = (unsigned char)(length); + left--; + mode = LEN; + break; + } + + /* process end of block */ + if (here.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + mode = TYPE; + break; + } + + /* invalid code */ + if (here.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + mode = BAD; + break; + } + + /* length code -- get extra bits, if any */ + extra = (unsigned)(here.op) & 31; + if (extra != 0) { + NEEDBITS(extra); + length += BITS(extra); + DROPBITS(extra); + } + Tracevv((stderr, "inflate: length %lu\n", length)); + + /* get distance code */ + for (;;) { + here = distcode[BITS(distbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if ((here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + if (here.op & 64) { + strm->msg = (char *)"invalid distance code"; + mode = BAD; + break; + } + offset = (unsigned)here.val; + + /* get distance extra bits, if any */ + extra = (unsigned)(here.op) & 15; + if (extra != 0) { + NEEDBITS(extra); + offset += BITS(extra); + DROPBITS(extra); + } + if (offset > WSIZE - (wrap ? 0: left)) { + strm->msg = (char *)"invalid distance too far back"; + mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %lu\n", offset)); + + /* copy match from window to output */ + do { + ROOM(); + copy = WSIZE - offset; + if (copy < left) { + from = put + copy; + copy = left - copy; + } + else { + from = put - offset; + copy = left; + } + if (copy > length) copy = length; + length -= copy; + left -= copy; + do { + *put++ = *from++; + } while (--copy); + } while (length != 0); + break; + + case DONE: + /* inflate stream terminated properly -- write leftover output */ + ret = Z_STREAM_END; + if (left < WSIZE) { + if (out(out_desc, window, (unsigned)(WSIZE - left))) + ret = Z_BUF_ERROR; + } + goto inf_leave; + + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + + default: /* can't happen, but makes compilers happy */ + ret = Z_STREAM_ERROR; + goto inf_leave; + } + + /* Return unused input */ + inf_leave: + strm->next_in = next; + strm->avail_in = have; + return ret; +} + +int ZEXPORT inflateBack9End(strm) +z_stream FAR *strm; +{ + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/infback9/infback9.h b/src/SDL2/external/zlib-1.2.8/contrib/infback9/infback9.h new file mode 100644 index 000000000..1073c0a38 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/infback9/infback9.h @@ -0,0 +1,37 @@ +/* infback9.h -- header for using inflateBack9 functions + * Copyright (C) 2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * This header file and associated patches provide a decoder for PKWare's + * undocumented deflate64 compression method (method 9). Use with infback9.c, + * inftree9.h, inftree9.c, and inffix9.h. These patches are not supported. + * This should be compiled with zlib, since it uses zutil.h and zutil.o. + * This code has not yet been tested on 16-bit architectures. See the + * comments in zlib.h for inflateBack() usage. These functions are used + * identically, except that there is no windowBits parameter, and a 64K + * window must be provided. Also if int's are 16 bits, then a zero for + * the third parameter of the "out" function actually means 65536UL. + * zlib.h must be included before this header file. + */ + +#ifdef __cplusplus +extern "C" { +#endif + +ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc)); +ZEXTERN int ZEXPORT inflateBack9End OF((z_stream FAR *strm)); +ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm, + unsigned char FAR *window, + const char *version, + int stream_size)); +#define inflateBack9Init(strm, window) \ + inflateBack9Init_((strm), (window), \ + ZLIB_VERSION, sizeof(z_stream)) + +#ifdef __cplusplus +} +#endif diff --git a/src/SDL2/external/zlib-1.2.8/contrib/infback9/inffix9.h b/src/SDL2/external/zlib-1.2.8/contrib/infback9/inffix9.h new file mode 100644 index 000000000..ee5671d2d --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/infback9/inffix9.h @@ -0,0 +1,107 @@ + /* inffix9.h -- table for decoding deflate64 fixed codes + * Generated automatically by makefixed9(). + */ + + /* WARNING: this file should *not* be used by applications. + It is part of the implementation of this library and is + subject to change. Applications should only use zlib.h. + */ + + static const code lenfix[512] = { + {96,7,0},{0,8,80},{0,8,16},{132,8,115},{130,7,31},{0,8,112}, + {0,8,48},{0,9,192},{128,7,10},{0,8,96},{0,8,32},{0,9,160}, + {0,8,0},{0,8,128},{0,8,64},{0,9,224},{128,7,6},{0,8,88}, + {0,8,24},{0,9,144},{131,7,59},{0,8,120},{0,8,56},{0,9,208}, + {129,7,17},{0,8,104},{0,8,40},{0,9,176},{0,8,8},{0,8,136}, + {0,8,72},{0,9,240},{128,7,4},{0,8,84},{0,8,20},{133,8,227}, + {131,7,43},{0,8,116},{0,8,52},{0,9,200},{129,7,13},{0,8,100}, + {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232}, + {128,7,8},{0,8,92},{0,8,28},{0,9,152},{132,7,83},{0,8,124}, + {0,8,60},{0,9,216},{130,7,23},{0,8,108},{0,8,44},{0,9,184}, + {0,8,12},{0,8,140},{0,8,76},{0,9,248},{128,7,3},{0,8,82}, + {0,8,18},{133,8,163},{131,7,35},{0,8,114},{0,8,50},{0,9,196}, + {129,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},{0,8,130}, + {0,8,66},{0,9,228},{128,7,7},{0,8,90},{0,8,26},{0,9,148}, + {132,7,67},{0,8,122},{0,8,58},{0,9,212},{130,7,19},{0,8,106}, + {0,8,42},{0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244}, + {128,7,5},{0,8,86},{0,8,22},{65,8,0},{131,7,51},{0,8,118}, + {0,8,54},{0,9,204},{129,7,15},{0,8,102},{0,8,38},{0,9,172}, + {0,8,6},{0,8,134},{0,8,70},{0,9,236},{128,7,9},{0,8,94}, + {0,8,30},{0,9,156},{132,7,99},{0,8,126},{0,8,62},{0,9,220}, + {130,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, + {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{133,8,131}, + {130,7,31},{0,8,113},{0,8,49},{0,9,194},{128,7,10},{0,8,97}, + {0,8,33},{0,9,162},{0,8,1},{0,8,129},{0,8,65},{0,9,226}, + {128,7,6},{0,8,89},{0,8,25},{0,9,146},{131,7,59},{0,8,121}, + {0,8,57},{0,9,210},{129,7,17},{0,8,105},{0,8,41},{0,9,178}, + {0,8,9},{0,8,137},{0,8,73},{0,9,242},{128,7,4},{0,8,85}, + {0,8,21},{144,8,3},{131,7,43},{0,8,117},{0,8,53},{0,9,202}, + {129,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133}, + {0,8,69},{0,9,234},{128,7,8},{0,8,93},{0,8,29},{0,9,154}, + {132,7,83},{0,8,125},{0,8,61},{0,9,218},{130,7,23},{0,8,109}, + {0,8,45},{0,9,186},{0,8,13},{0,8,141},{0,8,77},{0,9,250}, + {128,7,3},{0,8,83},{0,8,19},{133,8,195},{131,7,35},{0,8,115}, + {0,8,51},{0,9,198},{129,7,11},{0,8,99},{0,8,35},{0,9,166}, + {0,8,3},{0,8,131},{0,8,67},{0,9,230},{128,7,7},{0,8,91}, + {0,8,27},{0,9,150},{132,7,67},{0,8,123},{0,8,59},{0,9,214}, + {130,7,19},{0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139}, + {0,8,75},{0,9,246},{128,7,5},{0,8,87},{0,8,23},{77,8,0}, + {131,7,51},{0,8,119},{0,8,55},{0,9,206},{129,7,15},{0,8,103}, + {0,8,39},{0,9,174},{0,8,7},{0,8,135},{0,8,71},{0,9,238}, + {128,7,9},{0,8,95},{0,8,31},{0,9,158},{132,7,99},{0,8,127}, + {0,8,63},{0,9,222},{130,7,27},{0,8,111},{0,8,47},{0,9,190}, + {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80}, + {0,8,16},{132,8,115},{130,7,31},{0,8,112},{0,8,48},{0,9,193}, + {128,7,10},{0,8,96},{0,8,32},{0,9,161},{0,8,0},{0,8,128}, + {0,8,64},{0,9,225},{128,7,6},{0,8,88},{0,8,24},{0,9,145}, + {131,7,59},{0,8,120},{0,8,56},{0,9,209},{129,7,17},{0,8,104}, + {0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},{0,9,241}, + {128,7,4},{0,8,84},{0,8,20},{133,8,227},{131,7,43},{0,8,116}, + {0,8,52},{0,9,201},{129,7,13},{0,8,100},{0,8,36},{0,9,169}, + {0,8,4},{0,8,132},{0,8,68},{0,9,233},{128,7,8},{0,8,92}, + {0,8,28},{0,9,153},{132,7,83},{0,8,124},{0,8,60},{0,9,217}, + {130,7,23},{0,8,108},{0,8,44},{0,9,185},{0,8,12},{0,8,140}, + {0,8,76},{0,9,249},{128,7,3},{0,8,82},{0,8,18},{133,8,163}, + {131,7,35},{0,8,114},{0,8,50},{0,9,197},{129,7,11},{0,8,98}, + {0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, + {128,7,7},{0,8,90},{0,8,26},{0,9,149},{132,7,67},{0,8,122}, + {0,8,58},{0,9,213},{130,7,19},{0,8,106},{0,8,42},{0,9,181}, + {0,8,10},{0,8,138},{0,8,74},{0,9,245},{128,7,5},{0,8,86}, + {0,8,22},{65,8,0},{131,7,51},{0,8,118},{0,8,54},{0,9,205}, + {129,7,15},{0,8,102},{0,8,38},{0,9,173},{0,8,6},{0,8,134}, + {0,8,70},{0,9,237},{128,7,9},{0,8,94},{0,8,30},{0,9,157}, + {132,7,99},{0,8,126},{0,8,62},{0,9,221},{130,7,27},{0,8,110}, + {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253}, + {96,7,0},{0,8,81},{0,8,17},{133,8,131},{130,7,31},{0,8,113}, + {0,8,49},{0,9,195},{128,7,10},{0,8,97},{0,8,33},{0,9,163}, + {0,8,1},{0,8,129},{0,8,65},{0,9,227},{128,7,6},{0,8,89}, + {0,8,25},{0,9,147},{131,7,59},{0,8,121},{0,8,57},{0,9,211}, + {129,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},{0,8,137}, + {0,8,73},{0,9,243},{128,7,4},{0,8,85},{0,8,21},{144,8,3}, + {131,7,43},{0,8,117},{0,8,53},{0,9,203},{129,7,13},{0,8,101}, + {0,8,37},{0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235}, + {128,7,8},{0,8,93},{0,8,29},{0,9,155},{132,7,83},{0,8,125}, + {0,8,61},{0,9,219},{130,7,23},{0,8,109},{0,8,45},{0,9,187}, + {0,8,13},{0,8,141},{0,8,77},{0,9,251},{128,7,3},{0,8,83}, + {0,8,19},{133,8,195},{131,7,35},{0,8,115},{0,8,51},{0,9,199}, + {129,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, + {0,8,67},{0,9,231},{128,7,7},{0,8,91},{0,8,27},{0,9,151}, + {132,7,67},{0,8,123},{0,8,59},{0,9,215},{130,7,19},{0,8,107}, + {0,8,43},{0,9,183},{0,8,11},{0,8,139},{0,8,75},{0,9,247}, + {128,7,5},{0,8,87},{0,8,23},{77,8,0},{131,7,51},{0,8,119}, + {0,8,55},{0,9,207},{129,7,15},{0,8,103},{0,8,39},{0,9,175}, + {0,8,7},{0,8,135},{0,8,71},{0,9,239},{128,7,9},{0,8,95}, + {0,8,31},{0,9,159},{132,7,99},{0,8,127},{0,8,63},{0,9,223}, + {130,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143}, + {0,8,79},{0,9,255} + }; + + static const code distfix[32] = { + {128,5,1},{135,5,257},{131,5,17},{139,5,4097},{129,5,5}, + {137,5,1025},{133,5,65},{141,5,16385},{128,5,3},{136,5,513}, + {132,5,33},{140,5,8193},{130,5,9},{138,5,2049},{134,5,129}, + {142,5,32769},{128,5,2},{135,5,385},{131,5,25},{139,5,6145}, + {129,5,7},{137,5,1537},{133,5,97},{141,5,24577},{128,5,4}, + {136,5,769},{132,5,49},{140,5,12289},{130,5,13},{138,5,3073}, + {134,5,193},{142,5,49153} + }; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/infback9/inflate9.h b/src/SDL2/external/zlib-1.2.8/contrib/infback9/inflate9.h new file mode 100644 index 000000000..ee9a79394 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/infback9/inflate9.h @@ -0,0 +1,47 @@ +/* inflate9.h -- internal inflate state definition + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Possible inflate modes between inflate() calls */ +typedef enum { + TYPE, /* i: waiting for type bits, including last-flag bit */ + STORED, /* i: waiting for stored size (length and complement) */ + TABLE, /* i: waiting for dynamic block table lengths */ + LEN, /* i: waiting for length/lit code */ + DONE, /* finished check, done -- remain here until reset */ + BAD /* got a data error -- remain here until reset */ +} inflate_mode; + +/* + State transitions between above modes - + + (most modes can go to the BAD mode -- not shown for clarity) + + Read deflate blocks: + TYPE -> STORED or TABLE or LEN or DONE + STORED -> TYPE + TABLE -> LENLENS -> CODELENS -> LEN + Read deflate codes: + LEN -> LEN or TYPE + */ + +/* state maintained between inflate() calls. Approximately 7K bytes. */ +struct inflate_state { + /* sliding window */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + /* dynamic table building */ + unsigned ncode; /* number of code length code lengths */ + unsigned nlen; /* number of length code lengths */ + unsigned ndist; /* number of distance code lengths */ + unsigned have; /* number of code lengths in lens[] */ + code FAR *next; /* next available space in codes[] */ + unsigned short lens[320]; /* temporary storage for code lengths */ + unsigned short work[288]; /* work area for code table building */ + code codes[ENOUGH]; /* space for code tables */ +}; diff --git a/src/SDL2/external/zlib-1.2.8/contrib/infback9/inftree9.c b/src/SDL2/external/zlib-1.2.8/contrib/infback9/inftree9.c new file mode 100644 index 000000000..4a73ad215 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/infback9/inftree9.c @@ -0,0 +1,324 @@ +/* inftree9.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftree9.h" + +#define MAXBITS 15 + +const char inflate9_copyright[] = + " inflate9 1.2.8 Copyright 1995-2013 Mark Adler "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* + Build a set of tables to decode the provided canonical Huffman code. + The code lengths are lens[0..codes-1]. The result starts at *table, + whose indices are 0..2^bits-1. work is a writable array of at least + lens shorts, which is used as a work area. type is the type of code + to be generated, CODES, LENS, or DISTS. On return, zero is success, + -1 is an invalid code, and +1 means that ENOUGH isn't enough. table + on return points to the next available entry's address. bits is the + requested root table index bits, and on return it is the actual root + table index bits. It will differ if the request is greater than the + longest code or if it is less than the shortest code. + */ +int inflate_table9(type, lens, codes, table, bits, work) +codetype type; +unsigned short FAR *lens; +unsigned codes; +code FAR * FAR *table; +unsigned FAR *bits; +unsigned short FAR *work; +{ + unsigned len; /* a code's length in bits */ + unsigned sym; /* index of code symbols */ + unsigned min, max; /* minimum and maximum code lengths */ + unsigned root; /* number of index bits for root table */ + unsigned curr; /* number of index bits for current table */ + unsigned drop; /* code bits to drop for sub-table */ + int left; /* number of prefix codes available */ + unsigned used; /* code entries in table used */ + unsigned huff; /* Huffman code */ + unsigned incr; /* for incrementing code, index */ + unsigned fill; /* index for replicating entries */ + unsigned low; /* low bits for current root entry */ + unsigned mask; /* mask for low root bits */ + code this; /* table entry for duplication */ + code FAR *next; /* next available space in table */ + const unsigned short FAR *base; /* base value table to use */ + const unsigned short FAR *extra; /* extra bits table to use */ + int end; /* use base and extra for symbol > end */ + unsigned short count[MAXBITS+1]; /* number of codes of each length */ + unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ + static const unsigned short lbase[31] = { /* Length codes 257..285 base */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, + 19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115, + 131, 163, 195, 227, 3, 0, 0}; + static const unsigned short lext[31] = { /* Length codes 257..285 extra */ + 128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129, + 130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132, + 133, 133, 133, 133, 144, 72, 78}; + static const unsigned short dbase[32] = { /* Distance codes 0..31 base */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, + 65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073, + 4097, 6145, 8193, 12289, 16385, 24577, 32769, 49153}; + static const unsigned short dext[32] = { /* Distance codes 0..31 extra */ + 128, 128, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132, + 133, 133, 134, 134, 135, 135, 136, 136, 137, 137, 138, 138, + 139, 139, 140, 140, 141, 141, 142, 142}; + + /* + Process a set of code lengths to create a canonical Huffman code. The + code lengths are lens[0..codes-1]. Each length corresponds to the + symbols 0..codes-1. The Huffman code is generated by first sorting the + symbols by length from short to long, and retaining the symbol order + for codes with equal lengths. Then the code starts with all zero bits + for the first code of the shortest length, and the codes are integer + increments for the same length, and zeros are appended as the length + increases. For the deflate format, these bits are stored backwards + from their more natural integer increment ordering, and so when the + decoding tables are built in the large loop below, the integer codes + are incremented backwards. + + This routine assumes, but does not check, that all of the entries in + lens[] are in the range 0..MAXBITS. The caller must assure this. + 1..MAXBITS is interpreted as that code length. zero means that that + symbol does not occur in this code. + + The codes are sorted by computing a count of codes for each length, + creating from that a table of starting indices for each length in the + sorted table, and then entering the symbols in order in the sorted + table. The sorted table is work[], with that space being provided by + the caller. + + The length counts are used for other purposes as well, i.e. finding + the minimum and maximum length codes, determining if there are any + codes at all, checking for a valid set of lengths, and looking ahead + at length counts to determine sub-table sizes when building the + decoding tables. + */ + + /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ + for (len = 0; len <= MAXBITS; len++) + count[len] = 0; + for (sym = 0; sym < codes; sym++) + count[lens[sym]]++; + + /* bound code lengths, force root to be within code lengths */ + root = *bits; + for (max = MAXBITS; max >= 1; max--) + if (count[max] != 0) break; + if (root > max) root = max; + if (max == 0) return -1; /* no codes! */ + for (min = 1; min <= MAXBITS; min++) + if (count[min] != 0) break; + if (root < min) root = min; + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; + left -= count[len]; + if (left < 0) return -1; /* over-subscribed */ + } + if (left > 0 && (type == CODES || max != 1)) + return -1; /* incomplete set */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + count[len]; + + /* sort symbols by length, by symbol order within each length */ + for (sym = 0; sym < codes; sym++) + if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; + + /* + Create and fill in decoding tables. In this loop, the table being + filled is at next and has curr index bits. The code being used is huff + with length len. That code is converted to an index by dropping drop + bits off of the bottom. For codes where len is less than drop + curr, + those top drop + curr - len bits are incremented through all values to + fill the table with replicated entries. + + root is the number of index bits for the root table. When len exceeds + root, sub-tables are created pointed to by the root entry with an index + of the low root bits of huff. This is saved in low to check for when a + new sub-table should be started. drop is zero when the root table is + being filled, and drop is root when sub-tables are being filled. + + When a new sub-table is needed, it is necessary to look ahead in the + code lengths to determine what size sub-table is needed. The length + counts are used for this, and so count[] is decremented as codes are + entered in the tables. + + used keeps track of how many table entries have been allocated from the + provided *table space. It is checked for LENS and DIST tables against + the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in + the initial root table size constants. See the comments in inftree9.h + for more information. + + sym increments through all symbols, and the loop terminates when + all codes of length max, i.e. all codes, have been processed. This + routine permits incomplete codes, so another loop after this one fills + in the rest of the decoding tables with invalid code markers. + */ + + /* set up for code type */ + switch (type) { + case CODES: + base = extra = work; /* dummy value--not used */ + end = 19; + break; + case LENS: + base = lbase; + base -= 257; + extra = lext; + extra -= 257; + end = 256; + break; + default: /* DISTS */ + base = dbase; + extra = dext; + end = -1; + } + + /* initialize state for loop */ + huff = 0; /* starting code */ + sym = 0; /* starting code symbol */ + len = min; /* starting code length */ + next = *table; /* current table to fill in */ + curr = root; /* current table index bits */ + drop = 0; /* current bits to drop from code for index */ + low = (unsigned)(-1); /* trigger new sub-table when len > root */ + used = 1U << root; /* use root table entries */ + mask = used - 1; /* mask for comparing low */ + + /* check available table space */ + if ((type == LENS && used >= ENOUGH_LENS) || + (type == DISTS && used >= ENOUGH_DISTS)) + return 1; + + /* process all codes and make table entries */ + for (;;) { + /* create table entry */ + this.bits = (unsigned char)(len - drop); + if ((int)(work[sym]) < end) { + this.op = (unsigned char)0; + this.val = work[sym]; + } + else if ((int)(work[sym]) > end) { + this.op = (unsigned char)(extra[work[sym]]); + this.val = base[work[sym]]; + } + else { + this.op = (unsigned char)(32 + 64); /* end of block */ + this.val = 0; + } + + /* replicate for those indices with low len bits equal to huff */ + incr = 1U << (len - drop); + fill = 1U << curr; + do { + fill -= incr; + next[(huff >> drop) + fill] = this; + } while (fill != 0); + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + + /* go to next symbol, update count, len */ + sym++; + if (--(count[len]) == 0) { + if (len == max) break; + len = lens[work[sym]]; + } + + /* create new sub-table if needed */ + if (len > root && (huff & mask) != low) { + /* if first time, transition to sub-tables */ + if (drop == 0) + drop = root; + + /* increment past last table */ + next += 1U << curr; + + /* determine length of next table */ + curr = len - drop; + left = (int)(1 << curr); + while (curr + drop < max) { + left -= count[curr + drop]; + if (left <= 0) break; + curr++; + left <<= 1; + } + + /* check for enough space */ + used += 1U << curr; + if ((type == LENS && used >= ENOUGH_LENS) || + (type == DISTS && used >= ENOUGH_DISTS)) + return 1; + + /* point entry in root table to sub-table */ + low = huff & mask; + (*table)[low].op = (unsigned char)curr; + (*table)[low].bits = (unsigned char)root; + (*table)[low].val = (unsigned short)(next - *table); + } + } + + /* + Fill in rest of table for incomplete codes. This loop is similar to the + loop above in incrementing huff for table indices. It is assumed that + len is equal to curr + drop, so there is no loop needed to increment + through high index bits. When the current sub-table is filled, the loop + drops back to the root table to fill in any remaining entries there. + */ + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)(len - drop); + this.val = (unsigned short)0; + while (huff != 0) { + /* when done with sub-table, drop back to root table */ + if (drop != 0 && (huff & mask) != low) { + drop = 0; + len = root; + next = *table; + curr = root; + this.bits = (unsigned char)len; + } + + /* put invalid code marker in table */ + next[huff >> drop] = this; + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + } + + /* set return parameters */ + *table += used; + *bits = root; + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/infback9/inftree9.h b/src/SDL2/external/zlib-1.2.8/contrib/infback9/inftree9.h new file mode 100644 index 000000000..5ab21f0c6 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/infback9/inftree9.h @@ -0,0 +1,61 @@ +/* inftree9.h -- header to use inftree9.c + * Copyright (C) 1995-2008 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Structure for decoding tables. Each entry provides either the + information needed to do the operation requested by the code that + indexed that table entry, or it provides a pointer to another + table that indexes more bits of the code. op indicates whether + the entry is a pointer to another table, a literal, a length or + distance, an end-of-block, or an invalid code. For a table + pointer, the low four bits of op is the number of index bits of + that table. For a length or distance, the low four bits of op + is the number of extra bits to get after the code. bits is + the number of bits in this code or part of the code to drop off + of the bit buffer. val is the actual byte to output in the case + of a literal, the base length or distance, or the offset from + the current table to the next table. Each entry is four bytes. */ +typedef struct { + unsigned char op; /* operation, extra bits, table bits */ + unsigned char bits; /* bits in this part of the code */ + unsigned short val; /* offset in table or code value */ +} code; + +/* op values as set by inflate_table(): + 00000000 - literal + 0000tttt - table link, tttt != 0 is the number of table index bits + 100eeeee - length or distance, eeee is the number of extra bits + 01100000 - end of block + 01000000 - invalid code + */ + +/* Maximum size of the dynamic table. The maximum number of code structures is + 1446, which is the sum of 852 for literal/length codes and 594 for distance + codes. These values were found by exhaustive searches using the program + examples/enough.c found in the zlib distribtution. The arguments to that + program are the number of symbols, the initial root table size, and the + maximum bit length of a code. "enough 286 9 15" for literal/length codes + returns returns 852, and "enough 32 6 15" for distance codes returns 594. + The initial root table size (9 or 6) is found in the fifth argument of the + inflate_table() calls in infback9.c. If the root table size is changed, + then these maximum sizes would be need to be recalculated and updated. */ +#define ENOUGH_LENS 852 +#define ENOUGH_DISTS 594 +#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS) + +/* Type of code to build for inflate_table9() */ +typedef enum { + CODES, + LENS, + DISTS +} codetype; + +extern int inflate_table9 OF((codetype type, unsigned short FAR *lens, + unsigned codes, code FAR * FAR *table, + unsigned FAR *bits, unsigned short FAR *work)); diff --git a/src/SDL2/external/zlib-1.2.8/contrib/inflate86/inffas86.c b/src/SDL2/external/zlib-1.2.8/contrib/inflate86/inffas86.c new file mode 100644 index 000000000..7292f67b7 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/inflate86/inffas86.c @@ -0,0 +1,1157 @@ +/* inffas86.c is a hand tuned assembler version of + * + * inffast.c -- fast decoding + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Copyright (C) 2003 Chris Anderson + * Please use the copyright conditions above. + * + * Dec-29-2003 -- I added AMD64 inflate asm support. This version is also + * slightly quicker on x86 systems because, instead of using rep movsb to copy + * data, it uses rep movsw, which moves data in 2-byte chunks instead of single + * bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates + * from http://fedora.linux.duke.edu/fc1_x86_64 + * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with + * 1GB ram. The 64-bit version is about 4% faster than the 32-bit version, + * when decompressing mozilla-source-1.3.tar.gz. + * + * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from + * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at + * the moment. I have successfully compiled and tested this code with gcc2.96, + * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S + * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX + * enabled. I will attempt to merge the MMX code into this version. Newer + * versions of this and inffast.S can be found at + * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/ + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +/* Mark Adler's comments from inffast.c: */ + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ +void inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + struct inffast_ar { +/* 64 32 x86 x86_64 */ +/* ar offset register */ +/* 0 0 */ void *esp; /* esp save */ +/* 8 4 */ void *ebp; /* ebp save */ +/* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */ +/* 24 12 */ unsigned char FAR *last; /* r9 while in < last */ +/* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */ +/* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */ +/* 48 24 */ unsigned char FAR *end; /* r10 while out < end */ +/* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */ +/* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */ +/* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */ +/* 80 40 */ unsigned long hold; /* edx rdx local strm->hold */ +/* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */ +/* 92 48 */ unsigned wsize; /* window size */ +/* 96 52 */ unsigned write; /* window write index */ +/*100 56 */ unsigned lmask; /* r12 mask for lcode */ +/*104 60 */ unsigned dmask; /* r13 mask for dcode */ +/*108 64 */ unsigned len; /* r14 match length */ +/*112 68 */ unsigned dist; /* r15 match distance */ +/*116 72 */ unsigned status; /* set when state chng*/ + } ar; + +#if defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 ) +#define PAD_AVAIL_IN 6 +#define PAD_AVAIL_OUT 258 +#else +#define PAD_AVAIL_IN 5 +#define PAD_AVAIL_OUT 257 +#endif + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + ar.in = strm->next_in; + ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN); + ar.out = strm->next_out; + ar.beg = ar.out - (start - strm->avail_out); + ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT); + ar.wsize = state->wsize; + ar.write = state->wnext; + ar.window = state->window; + ar.hold = state->hold; + ar.bits = state->bits; + ar.lcode = state->lencode; + ar.dcode = state->distcode; + ar.lmask = (1U << state->lenbits) - 1; + ar.dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + + /* align in on 1/2 hold size boundary */ + while (((unsigned long)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) { + ar.hold += (unsigned long)*ar.in++ << ar.bits; + ar.bits += 8; + } + +#if defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 ) + __asm__ __volatile__ ( +" leaq %0, %%rax\n" +" movq %%rbp, 8(%%rax)\n" /* save regs rbp and rsp */ +" movq %%rsp, (%%rax)\n" +" movq %%rax, %%rsp\n" /* make rsp point to &ar */ +" movq 16(%%rsp), %%rsi\n" /* rsi = in */ +" movq 32(%%rsp), %%rdi\n" /* rdi = out */ +" movq 24(%%rsp), %%r9\n" /* r9 = last */ +" movq 48(%%rsp), %%r10\n" /* r10 = end */ +" movq 64(%%rsp), %%rbp\n" /* rbp = lcode */ +" movq 72(%%rsp), %%r11\n" /* r11 = dcode */ +" movq 80(%%rsp), %%rdx\n" /* rdx = hold */ +" movl 88(%%rsp), %%ebx\n" /* ebx = bits */ +" movl 100(%%rsp), %%r12d\n" /* r12d = lmask */ +" movl 104(%%rsp), %%r13d\n" /* r13d = dmask */ + /* r14d = len */ + /* r15d = dist */ +" cld\n" +" cmpq %%rdi, %%r10\n" +" je .L_one_time\n" /* if only one decode left */ +" cmpq %%rsi, %%r9\n" +" je .L_one_time\n" +" jmp .L_do_loop\n" + +".L_one_time:\n" +" movq %%r12, %%r8\n" /* r8 = lmask */ +" cmpb $32, %%bl\n" +" ja .L_get_length_code_one_time\n" + +" lodsl\n" /* eax = *(uint *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $32, %%bl\n" /* bits += 32 */ +" shlq %%cl, %%rax\n" +" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */ +" jmp .L_get_length_code_one_time\n" + +".align 32,0x90\n" +".L_while_test:\n" +" cmpq %%rdi, %%r10\n" +" jbe .L_break_loop\n" +" cmpq %%rsi, %%r9\n" +" jbe .L_break_loop\n" + +".L_do_loop:\n" +" movq %%r12, %%r8\n" /* r8 = lmask */ +" cmpb $32, %%bl\n" +" ja .L_get_length_code\n" /* if (32 < bits) */ + +" lodsl\n" /* eax = *(uint *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $32, %%bl\n" /* bits += 32 */ +" shlq %%cl, %%rax\n" +" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */ + +".L_get_length_code:\n" +" andq %%rdx, %%r8\n" /* r8 &= hold */ +" movl (%%rbp,%%r8,4), %%eax\n" /* eax = lcode[hold & lmask] */ + +" movb %%ah, %%cl\n" /* cl = this.bits */ +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrq %%cl, %%rdx\n" /* hold >>= this.bits */ + +" testb %%al, %%al\n" +" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */ + +" movq %%r12, %%r8\n" /* r8 = lmask */ +" shrl $16, %%eax\n" /* output this.val char */ +" stosb\n" + +".L_get_length_code_one_time:\n" +" andq %%rdx, %%r8\n" /* r8 &= hold */ +" movl (%%rbp,%%r8,4), %%eax\n" /* eax = lcode[hold & lmask] */ + +".L_dolen:\n" +" movb %%ah, %%cl\n" /* cl = this.bits */ +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrq %%cl, %%rdx\n" /* hold >>= this.bits */ + +" testb %%al, %%al\n" +" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */ + +" shrl $16, %%eax\n" /* output this.val char */ +" stosb\n" +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_length_base:\n" +" movl %%eax, %%r14d\n" /* len = this */ +" shrl $16, %%r14d\n" /* len = this.val */ +" movb %%al, %%cl\n" + +" testb $16, %%al\n" +" jz .L_test_for_second_level_length\n" /* if ((op & 16) == 0) 8% */ +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_decode_distance\n" /* if (!op) */ + +".L_add_bits_to_len:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrq %%cl, %%rdx\n" +" addl %%eax, %%r14d\n" /* len += hold & mask[op] */ + +".L_decode_distance:\n" +" movq %%r13, %%r8\n" /* r8 = dmask */ +" cmpb $32, %%bl\n" +" ja .L_get_distance_code\n" /* if (32 < bits) */ + +" lodsl\n" /* eax = *(uint *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $32, %%bl\n" /* bits += 32 */ +" shlq %%cl, %%rax\n" +" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */ + +".L_get_distance_code:\n" +" andq %%rdx, %%r8\n" /* r8 &= hold */ +" movl (%%r11,%%r8,4), %%eax\n" /* eax = dcode[hold & dmask] */ + +".L_dodist:\n" +" movl %%eax, %%r15d\n" /* dist = this */ +" shrl $16, %%r15d\n" /* dist = this.val */ +" movb %%ah, %%cl\n" +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrq %%cl, %%rdx\n" /* hold >>= this.bits */ +" movb %%al, %%cl\n" /* cl = this.op */ + +" testb $16, %%al\n" /* if ((op & 16) == 0) */ +" jz .L_test_for_second_level_dist\n" +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_check_dist_one\n" + +".L_add_bits_to_dist:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" /* (1 << op) - 1 */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrq %%cl, %%rdx\n" +" addl %%eax, %%r15d\n" /* dist += hold & ((1 << op) - 1) */ + +".L_check_window:\n" +" movq %%rsi, %%r8\n" /* save in so from can use it's reg */ +" movq %%rdi, %%rax\n" +" subq 40(%%rsp), %%rax\n" /* nbytes = out - beg */ + +" cmpl %%r15d, %%eax\n" +" jb .L_clip_window\n" /* if (dist > nbytes) 4.2% */ + +" movl %%r14d, %%ecx\n" /* ecx = len */ +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = out - dist */ + +" sarl %%ecx\n" +" jnc .L_copy_two\n" /* if len % 2 == 0 */ + +" rep movsw\n" +" movb (%%rsi), %%al\n" +" movb %%al, (%%rdi)\n" +" incq %%rdi\n" + +" movq %%r8, %%rsi\n" /* move in back to %rsi, toss from */ +" jmp .L_while_test\n" + +".L_copy_two:\n" +" rep movsw\n" +" movq %%r8, %%rsi\n" /* move in back to %rsi, toss from */ +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_check_dist_one:\n" +" cmpl $1, %%r15d\n" /* if dist 1, is a memset */ +" jne .L_check_window\n" +" cmpq %%rdi, 40(%%rsp)\n" /* if out == beg, outside window */ +" je .L_check_window\n" + +" movl %%r14d, %%ecx\n" /* ecx = len */ +" movb -1(%%rdi), %%al\n" +" movb %%al, %%ah\n" + +" sarl %%ecx\n" +" jnc .L_set_two\n" +" movb %%al, (%%rdi)\n" +" incq %%rdi\n" + +".L_set_two:\n" +" rep stosw\n" +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_second_level_length:\n" +" testb $64, %%al\n" +" jnz .L_test_for_end_of_block\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl %%r14d, %%eax\n" /* eax += len */ +" movl (%%rbp,%%rax,4), %%eax\n" /* eax = lcode[val+(hold&mask[op])]*/ +" jmp .L_dolen\n" + +".align 32,0x90\n" +".L_test_for_second_level_dist:\n" +" testb $64, %%al\n" +" jnz .L_invalid_distance_code\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl %%r15d, %%eax\n" /* eax += dist */ +" movl (%%r11,%%rax,4), %%eax\n" /* eax = dcode[val+(hold&mask[op])]*/ +" jmp .L_dodist\n" + +".align 32,0x90\n" +".L_clip_window:\n" +" movl %%eax, %%ecx\n" /* ecx = nbytes */ +" movl 92(%%rsp), %%eax\n" /* eax = wsize, prepare for dist cmp */ +" negl %%ecx\n" /* nbytes = -nbytes */ + +" cmpl %%r15d, %%eax\n" +" jb .L_invalid_distance_too_far\n" /* if (dist > wsize) */ + +" addl %%r15d, %%ecx\n" /* nbytes = dist - nbytes */ +" cmpl $0, 96(%%rsp)\n" +" jne .L_wrap_around_window\n" /* if (write != 0) */ + +" movq 56(%%rsp), %%rsi\n" /* from = window */ +" subl %%ecx, %%eax\n" /* eax -= nbytes */ +" addq %%rax, %%rsi\n" /* from += wsize - nbytes */ + +" movl %%r14d, %%eax\n" /* eax = len */ +" cmpl %%ecx, %%r14d\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* eax -= nbytes */ +" rep movsb\n" +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = &out[ -dist ] */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_wrap_around_window:\n" +" movl 96(%%rsp), %%eax\n" /* eax = write */ +" cmpl %%eax, %%ecx\n" +" jbe .L_contiguous_in_window\n" /* if (write >= nbytes) */ + +" movl 92(%%rsp), %%esi\n" /* from = wsize */ +" addq 56(%%rsp), %%rsi\n" /* from += window */ +" addq %%rax, %%rsi\n" /* from += write */ +" subq %%rcx, %%rsi\n" /* from -= nbytes */ +" subl %%eax, %%ecx\n" /* nbytes -= write */ + +" movl %%r14d, %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movq 56(%%rsp), %%rsi\n" /* from = window */ +" movl 96(%%rsp), %%ecx\n" /* nbytes = write */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = out - dist */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_contiguous_in_window:\n" +" movq 56(%%rsp), %%rsi\n" /* rsi = window */ +" addq %%rax, %%rsi\n" +" subq %%rcx, %%rsi\n" /* from += write - nbytes */ + +" movl %%r14d, %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = out - dist */ +" jmp .L_do_copy\n" /* if (nbytes >= len) */ + +".align 32,0x90\n" +".L_do_copy:\n" +" movl %%eax, %%ecx\n" /* ecx = len */ +" rep movsb\n" + +" movq %%r8, %%rsi\n" /* move in back to %esi, toss from */ +" jmp .L_while_test\n" + +".L_test_for_end_of_block:\n" +" testb $32, %%al\n" +" jz .L_invalid_literal_length_code\n" +" movl $1, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_literal_length_code:\n" +" movl $2, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_code:\n" +" movl $3, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_too_far:\n" +" movl $4, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_break_loop:\n" +" movl $0, 116(%%rsp)\n" + +".L_break_loop_with_status:\n" +/* put in, out, bits, and hold back into ar and pop esp */ +" movq %%rsi, 16(%%rsp)\n" /* in */ +" movq %%rdi, 32(%%rsp)\n" /* out */ +" movl %%ebx, 88(%%rsp)\n" /* bits */ +" movq %%rdx, 80(%%rsp)\n" /* hold */ +" movq (%%rsp), %%rax\n" /* restore rbp and rsp */ +" movq 8(%%rsp), %%rbp\n" +" movq %%rax, %%rsp\n" + : + : "m" (ar) + : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", + "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15" + ); +#elif ( defined( __GNUC__ ) || defined( __ICC ) ) && defined( __i386 ) + __asm__ __volatile__ ( +" leal %0, %%eax\n" +" movl %%esp, (%%eax)\n" /* save esp, ebp */ +" movl %%ebp, 4(%%eax)\n" +" movl %%eax, %%esp\n" +" movl 8(%%esp), %%esi\n" /* esi = in */ +" movl 16(%%esp), %%edi\n" /* edi = out */ +" movl 40(%%esp), %%edx\n" /* edx = hold */ +" movl 44(%%esp), %%ebx\n" /* ebx = bits */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ + +" cld\n" +" jmp .L_do_loop\n" + +".align 32,0x90\n" +".L_while_test:\n" +" cmpl %%edi, 24(%%esp)\n" /* out < end */ +" jbe .L_break_loop\n" +" cmpl %%esi, 12(%%esp)\n" /* in < last */ +" jbe .L_break_loop\n" + +".L_do_loop:\n" +" cmpb $15, %%bl\n" +" ja .L_get_length_code\n" /* if (15 < bits) */ + +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ + +".L_get_length_code:\n" +" movl 56(%%esp), %%eax\n" /* eax = lmask */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" movl (%%ebp,%%eax,4), %%eax\n" /* eax = lcode[hold & lmask] */ + +".L_dolen:\n" +" movb %%ah, %%cl\n" /* cl = this.bits */ +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrl %%cl, %%edx\n" /* hold >>= this.bits */ + +" testb %%al, %%al\n" +" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */ + +" shrl $16, %%eax\n" /* output this.val char */ +" stosb\n" +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_length_base:\n" +" movl %%eax, %%ecx\n" /* len = this */ +" shrl $16, %%ecx\n" /* len = this.val */ +" movl %%ecx, 64(%%esp)\n" /* save len */ +" movb %%al, %%cl\n" + +" testb $16, %%al\n" +" jz .L_test_for_second_level_length\n" /* if ((op & 16) == 0) 8% */ +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_decode_distance\n" /* if (!op) */ +" cmpb %%cl, %%bl\n" +" jae .L_add_bits_to_len\n" /* if (op <= bits) */ + +" movb %%cl, %%ch\n" /* stash op in ch, freeing cl */ +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ +" movb %%ch, %%cl\n" /* move op back to ecx */ + +".L_add_bits_to_len:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrl %%cl, %%edx\n" +" addl %%eax, 64(%%esp)\n" /* len += hold & mask[op] */ + +".L_decode_distance:\n" +" cmpb $15, %%bl\n" +" ja .L_get_distance_code\n" /* if (15 < bits) */ + +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ + +".L_get_distance_code:\n" +" movl 60(%%esp), %%eax\n" /* eax = dmask */ +" movl 36(%%esp), %%ecx\n" /* ecx = dcode */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" movl (%%ecx,%%eax,4), %%eax\n"/* eax = dcode[hold & dmask] */ + +".L_dodist:\n" +" movl %%eax, %%ebp\n" /* dist = this */ +" shrl $16, %%ebp\n" /* dist = this.val */ +" movb %%ah, %%cl\n" +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrl %%cl, %%edx\n" /* hold >>= this.bits */ +" movb %%al, %%cl\n" /* cl = this.op */ + +" testb $16, %%al\n" /* if ((op & 16) == 0) */ +" jz .L_test_for_second_level_dist\n" +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_check_dist_one\n" +" cmpb %%cl, %%bl\n" +" jae .L_add_bits_to_dist\n" /* if (op <= bits) 97.6% */ + +" movb %%cl, %%ch\n" /* stash op in ch, freeing cl */ +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ +" movb %%ch, %%cl\n" /* move op back to ecx */ + +".L_add_bits_to_dist:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" /* (1 << op) - 1 */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrl %%cl, %%edx\n" +" addl %%eax, %%ebp\n" /* dist += hold & ((1 << op) - 1) */ + +".L_check_window:\n" +" movl %%esi, 8(%%esp)\n" /* save in so from can use it's reg */ +" movl %%edi, %%eax\n" +" subl 20(%%esp), %%eax\n" /* nbytes = out - beg */ + +" cmpl %%ebp, %%eax\n" +" jb .L_clip_window\n" /* if (dist > nbytes) 4.2% */ + +" movl 64(%%esp), %%ecx\n" /* ecx = len */ +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ + +" sarl %%ecx\n" +" jnc .L_copy_two\n" /* if len % 2 == 0 */ + +" rep movsw\n" +" movb (%%esi), %%al\n" +" movb %%al, (%%edi)\n" +" incl %%edi\n" + +" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".L_copy_two:\n" +" rep movsw\n" +" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_check_dist_one:\n" +" cmpl $1, %%ebp\n" /* if dist 1, is a memset */ +" jne .L_check_window\n" +" cmpl %%edi, 20(%%esp)\n" +" je .L_check_window\n" /* out == beg, if outside window */ + +" movl 64(%%esp), %%ecx\n" /* ecx = len */ +" movb -1(%%edi), %%al\n" +" movb %%al, %%ah\n" + +" sarl %%ecx\n" +" jnc .L_set_two\n" +" movb %%al, (%%edi)\n" +" incl %%edi\n" + +".L_set_two:\n" +" rep stosw\n" +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_second_level_length:\n" +" testb $64, %%al\n" +" jnz .L_test_for_end_of_block\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl 64(%%esp), %%eax\n" /* eax += len */ +" movl (%%ebp,%%eax,4), %%eax\n" /* eax = lcode[val+(hold&mask[op])]*/ +" jmp .L_dolen\n" + +".align 32,0x90\n" +".L_test_for_second_level_dist:\n" +" testb $64, %%al\n" +" jnz .L_invalid_distance_code\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl %%ebp, %%eax\n" /* eax += dist */ +" movl 36(%%esp), %%ecx\n" /* ecx = dcode */ +" movl (%%ecx,%%eax,4), %%eax\n" /* eax = dcode[val+(hold&mask[op])]*/ +" jmp .L_dodist\n" + +".align 32,0x90\n" +".L_clip_window:\n" +" movl %%eax, %%ecx\n" +" movl 48(%%esp), %%eax\n" /* eax = wsize */ +" negl %%ecx\n" /* nbytes = -nbytes */ +" movl 28(%%esp), %%esi\n" /* from = window */ + +" cmpl %%ebp, %%eax\n" +" jb .L_invalid_distance_too_far\n" /* if (dist > wsize) */ + +" addl %%ebp, %%ecx\n" /* nbytes = dist - nbytes */ +" cmpl $0, 52(%%esp)\n" +" jne .L_wrap_around_window\n" /* if (write != 0) */ + +" subl %%ecx, %%eax\n" +" addl %%eax, %%esi\n" /* from += wsize - nbytes */ + +" movl 64(%%esp), %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_wrap_around_window:\n" +" movl 52(%%esp), %%eax\n" /* eax = write */ +" cmpl %%eax, %%ecx\n" +" jbe .L_contiguous_in_window\n" /* if (write >= nbytes) */ + +" addl 48(%%esp), %%esi\n" /* from += wsize */ +" addl %%eax, %%esi\n" /* from += write */ +" subl %%ecx, %%esi\n" /* from -= nbytes */ +" subl %%eax, %%ecx\n" /* nbytes -= write */ + +" movl 64(%%esp), %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl 28(%%esp), %%esi\n" /* from = window */ +" movl 52(%%esp), %%ecx\n" /* nbytes = write */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_contiguous_in_window:\n" +" addl %%eax, %%esi\n" +" subl %%ecx, %%esi\n" /* from += write - nbytes */ + +" movl 64(%%esp), %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ +" jmp .L_do_copy\n" /* if (nbytes >= len) */ + +".align 32,0x90\n" +".L_do_copy:\n" +" movl %%eax, %%ecx\n" +" rep movsb\n" + +" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".L_test_for_end_of_block:\n" +" testb $32, %%al\n" +" jz .L_invalid_literal_length_code\n" +" movl $1, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_literal_length_code:\n" +" movl $2, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_code:\n" +" movl $3, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_too_far:\n" +" movl 8(%%esp), %%esi\n" +" movl $4, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_break_loop:\n" +" movl $0, 72(%%esp)\n" + +".L_break_loop_with_status:\n" +/* put in, out, bits, and hold back into ar and pop esp */ +" movl %%esi, 8(%%esp)\n" /* save in */ +" movl %%edi, 16(%%esp)\n" /* save out */ +" movl %%ebx, 44(%%esp)\n" /* save bits */ +" movl %%edx, 40(%%esp)\n" /* save hold */ +" movl 4(%%esp), %%ebp\n" /* restore esp, ebp */ +" movl (%%esp), %%esp\n" + : + : "m" (ar) + : "memory", "%eax", "%ebx", "%ecx", "%edx", "%esi", "%edi" + ); +#elif defined( _MSC_VER ) && ! defined( _M_AMD64 ) + __asm { + lea eax, ar + mov [eax], esp /* save esp, ebp */ + mov [eax+4], ebp + mov esp, eax + mov esi, [esp+8] /* esi = in */ + mov edi, [esp+16] /* edi = out */ + mov edx, [esp+40] /* edx = hold */ + mov ebx, [esp+44] /* ebx = bits */ + mov ebp, [esp+32] /* ebp = lcode */ + + cld + jmp L_do_loop + +ALIGN 4 +L_while_test: + cmp [esp+24], edi + jbe L_break_loop + cmp [esp+12], esi + jbe L_break_loop + +L_do_loop: + cmp bl, 15 + ja L_get_length_code /* if (15 < bits) */ + + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + +L_get_length_code: + mov eax, [esp+56] /* eax = lmask */ + and eax, edx /* eax &= hold */ + mov eax, [ebp+eax*4] /* eax = lcode[hold & lmask] */ + +L_dolen: + mov cl, ah /* cl = this.bits */ + sub bl, ah /* bits -= this.bits */ + shr edx, cl /* hold >>= this.bits */ + + test al, al + jnz L_test_for_length_base /* if (op != 0) 45.7% */ + + shr eax, 16 /* output this.val char */ + stosb + jmp L_while_test + +ALIGN 4 +L_test_for_length_base: + mov ecx, eax /* len = this */ + shr ecx, 16 /* len = this.val */ + mov [esp+64], ecx /* save len */ + mov cl, al + + test al, 16 + jz L_test_for_second_level_length /* if ((op & 16) == 0) 8% */ + and cl, 15 /* op &= 15 */ + jz L_decode_distance /* if (!op) */ + cmp bl, cl + jae L_add_bits_to_len /* if (op <= bits) */ + + mov ch, cl /* stash op in ch, freeing cl */ + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + mov cl, ch /* move op back to ecx */ + +L_add_bits_to_len: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx /* eax &= hold */ + shr edx, cl + add [esp+64], eax /* len += hold & mask[op] */ + +L_decode_distance: + cmp bl, 15 + ja L_get_distance_code /* if (15 < bits) */ + + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + +L_get_distance_code: + mov eax, [esp+60] /* eax = dmask */ + mov ecx, [esp+36] /* ecx = dcode */ + and eax, edx /* eax &= hold */ + mov eax, [ecx+eax*4]/* eax = dcode[hold & dmask] */ + +L_dodist: + mov ebp, eax /* dist = this */ + shr ebp, 16 /* dist = this.val */ + mov cl, ah + sub bl, ah /* bits -= this.bits */ + shr edx, cl /* hold >>= this.bits */ + mov cl, al /* cl = this.op */ + + test al, 16 /* if ((op & 16) == 0) */ + jz L_test_for_second_level_dist + and cl, 15 /* op &= 15 */ + jz L_check_dist_one + cmp bl, cl + jae L_add_bits_to_dist /* if (op <= bits) 97.6% */ + + mov ch, cl /* stash op in ch, freeing cl */ + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + mov cl, ch /* move op back to ecx */ + +L_add_bits_to_dist: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax /* (1 << op) - 1 */ + and eax, edx /* eax &= hold */ + shr edx, cl + add ebp, eax /* dist += hold & ((1 << op) - 1) */ + +L_check_window: + mov [esp+8], esi /* save in so from can use it's reg */ + mov eax, edi + sub eax, [esp+20] /* nbytes = out - beg */ + + cmp eax, ebp + jb L_clip_window /* if (dist > nbytes) 4.2% */ + + mov ecx, [esp+64] /* ecx = len */ + mov esi, edi + sub esi, ebp /* from = out - dist */ + + sar ecx, 1 + jnc L_copy_two + + rep movsw + mov al, [esi] + mov [edi], al + inc edi + + mov esi, [esp+8] /* move in back to %esi, toss from */ + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +L_copy_two: + rep movsw + mov esi, [esp+8] /* move in back to %esi, toss from */ + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +ALIGN 4 +L_check_dist_one: + cmp ebp, 1 /* if dist 1, is a memset */ + jne L_check_window + cmp [esp+20], edi + je L_check_window /* out == beg, if outside window */ + + mov ecx, [esp+64] /* ecx = len */ + mov al, [edi-1] + mov ah, al + + sar ecx, 1 + jnc L_set_two + mov [edi], al /* memset out with from[-1] */ + inc edi + +L_set_two: + rep stosw + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +ALIGN 4 +L_test_for_second_level_length: + test al, 64 + jnz L_test_for_end_of_block /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx /* eax &= hold */ + add eax, [esp+64] /* eax += len */ + mov eax, [ebp+eax*4] /* eax = lcode[val+(hold&mask[op])]*/ + jmp L_dolen + +ALIGN 4 +L_test_for_second_level_dist: + test al, 64 + jnz L_invalid_distance_code /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx /* eax &= hold */ + add eax, ebp /* eax += dist */ + mov ecx, [esp+36] /* ecx = dcode */ + mov eax, [ecx+eax*4] /* eax = dcode[val+(hold&mask[op])]*/ + jmp L_dodist + +ALIGN 4 +L_clip_window: + mov ecx, eax + mov eax, [esp+48] /* eax = wsize */ + neg ecx /* nbytes = -nbytes */ + mov esi, [esp+28] /* from = window */ + + cmp eax, ebp + jb L_invalid_distance_too_far /* if (dist > wsize) */ + + add ecx, ebp /* nbytes = dist - nbytes */ + cmp dword ptr [esp+52], 0 + jne L_wrap_around_window /* if (write != 0) */ + + sub eax, ecx + add esi, eax /* from += wsize - nbytes */ + + mov eax, [esp+64] /* eax = len */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, edi + sub esi, ebp /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_wrap_around_window: + mov eax, [esp+52] /* eax = write */ + cmp ecx, eax + jbe L_contiguous_in_window /* if (write >= nbytes) */ + + add esi, [esp+48] /* from += wsize */ + add esi, eax /* from += write */ + sub esi, ecx /* from -= nbytes */ + sub ecx, eax /* nbytes -= write */ + + mov eax, [esp+64] /* eax = len */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, [esp+28] /* from = window */ + mov ecx, [esp+52] /* nbytes = write */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, edi + sub esi, ebp /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_contiguous_in_window: + add esi, eax + sub esi, ecx /* from += write - nbytes */ + + mov eax, [esp+64] /* eax = len */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, edi + sub esi, ebp /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_do_copy: + mov ecx, eax + rep movsb + + mov esi, [esp+8] /* move in back to %esi, toss from */ + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +L_test_for_end_of_block: + test al, 32 + jz L_invalid_literal_length_code + mov dword ptr [esp+72], 1 + jmp L_break_loop_with_status + +L_invalid_literal_length_code: + mov dword ptr [esp+72], 2 + jmp L_break_loop_with_status + +L_invalid_distance_code: + mov dword ptr [esp+72], 3 + jmp L_break_loop_with_status + +L_invalid_distance_too_far: + mov esi, [esp+4] + mov dword ptr [esp+72], 4 + jmp L_break_loop_with_status + +L_break_loop: + mov dword ptr [esp+72], 0 + +L_break_loop_with_status: +/* put in, out, bits, and hold back into ar and pop esp */ + mov [esp+8], esi /* save in */ + mov [esp+16], edi /* save out */ + mov [esp+44], ebx /* save bits */ + mov [esp+40], edx /* save hold */ + mov ebp, [esp+4] /* restore esp, ebp */ + mov esp, [esp] + } +#else +#error "x86 architecture not defined" +#endif + + if (ar.status > 1) { + if (ar.status == 2) + strm->msg = "invalid literal/length code"; + else if (ar.status == 3) + strm->msg = "invalid distance code"; + else + strm->msg = "invalid distance too far back"; + state->mode = BAD; + } + else if ( ar.status == 1 ) { + state->mode = TYPE; + } + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + ar.len = ar.bits >> 3; + ar.in -= ar.len; + ar.bits -= ar.len << 3; + ar.hold &= (1U << ar.bits) - 1; + + /* update state and return */ + strm->next_in = ar.in; + strm->next_out = ar.out; + strm->avail_in = (unsigned)(ar.in < ar.last ? + PAD_AVAIL_IN + (ar.last - ar.in) : + PAD_AVAIL_IN - (ar.in - ar.last)); + strm->avail_out = (unsigned)(ar.out < ar.end ? + PAD_AVAIL_OUT + (ar.end - ar.out) : + PAD_AVAIL_OUT - (ar.out - ar.end)); + state->hold = ar.hold; + state->bits = ar.bits; + return; +} + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/inflate86/inffast.S b/src/SDL2/external/zlib-1.2.8/contrib/inflate86/inffast.S new file mode 100644 index 000000000..2245a2905 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/inflate86/inffast.S @@ -0,0 +1,1368 @@ +/* + * inffast.S is a hand tuned assembler version of: + * + * inffast.c -- fast decoding + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Copyright (C) 2003 Chris Anderson + * Please use the copyright conditions above. + * + * This version (Jan-23-2003) of inflate_fast was coded and tested under + * GNU/Linux on a pentium 3, using the gcc-3.2 compiler distribution. On that + * machine, I found that gzip style archives decompressed about 20% faster than + * the gcc-3.2 -O3 -fomit-frame-pointer compiled version. Your results will + * depend on how large of a buffer is used for z_stream.next_in & next_out + * (8K-32K worked best for my 256K cpu cache) and how much overhead there is in + * stream processing I/O and crc32/addler32. In my case, this routine used + * 70% of the cpu time and crc32 used 20%. + * + * I am confident that this version will work in the general case, but I have + * not tested a wide variety of datasets or a wide variety of platforms. + * + * Jan-24-2003 -- Added -DUSE_MMX define for slightly faster inflating. + * It should be a runtime flag instead of compile time flag... + * + * Jan-26-2003 -- Added runtime check for MMX support with cpuid instruction. + * With -DUSE_MMX, only MMX code is compiled. With -DNO_MMX, only non-MMX code + * is compiled. Without either option, runtime detection is enabled. Runtime + * detection should work on all modern cpus and the recomended algorithm (flip + * ID bit on eflags and then use the cpuid instruction) is used in many + * multimedia applications. Tested under win2k with gcc-2.95 and gas-2.12 + * distributed with cygwin3. Compiling with gcc-2.95 -c inffast.S -o + * inffast.obj generates a COFF object which can then be linked with MSVC++ + * compiled code. Tested under FreeBSD 4.7 with gcc-2.95. + * + * Jan-28-2003 -- Tested Athlon XP... MMX mode is slower than no MMX (and + * slower than compiler generated code). Adjusted cpuid check to use the MMX + * code only for Pentiums < P4 until I have more data on the P4. Speed + * improvment is only about 15% on the Athlon when compared with code generated + * with MSVC++. Not sure yet, but I think the P4 will also be slower using the + * MMX mode because many of it's x86 ALU instructions execute in .5 cycles and + * have less latency than MMX ops. Added code to buffer the last 11 bytes of + * the input stream since the MMX code grabs bits in chunks of 32, which + * differs from the inffast.c algorithm. I don't think there would have been + * read overruns where a page boundary was crossed (a segfault), but there + * could have been overruns when next_in ends on unaligned memory (unintialized + * memory read). + * + * Mar-13-2003 -- P4 MMX is slightly slower than P4 NO_MMX. I created a C + * version of the non-MMX code so that it doesn't depend on zstrm and zstate + * structure offsets which are hard coded in this file. This was last tested + * with zlib-1.2.0 which is currently in beta testing, newer versions of this + * and inffas86.c can be found at http://www.eetbeetee.com/zlib/ and + * http://www.charm.net/~christop/zlib/ + */ + + +/* + * if you have underscore linking problems (_inflate_fast undefined), try + * using -DGAS_COFF + */ +#if ! defined( GAS_COFF ) && ! defined( GAS_ELF ) + +#if defined( WIN32 ) || defined( __CYGWIN__ ) +#define GAS_COFF /* windows object format */ +#else +#define GAS_ELF +#endif + +#endif /* ! GAS_COFF && ! GAS_ELF */ + + +#if defined( GAS_COFF ) + +/* coff externals have underscores */ +#define inflate_fast _inflate_fast +#define inflate_fast_use_mmx _inflate_fast_use_mmx + +#endif /* GAS_COFF */ + + +.file "inffast.S" + +.globl inflate_fast + +.text +.align 4,0 +.L_invalid_literal_length_code_msg: +.string "invalid literal/length code" + +.align 4,0 +.L_invalid_distance_code_msg: +.string "invalid distance code" + +.align 4,0 +.L_invalid_distance_too_far_msg: +.string "invalid distance too far back" + +#if ! defined( NO_MMX ) +.align 4,0 +.L_mask: /* mask[N] = ( 1 << N ) - 1 */ +.long 0 +.long 1 +.long 3 +.long 7 +.long 15 +.long 31 +.long 63 +.long 127 +.long 255 +.long 511 +.long 1023 +.long 2047 +.long 4095 +.long 8191 +.long 16383 +.long 32767 +.long 65535 +.long 131071 +.long 262143 +.long 524287 +.long 1048575 +.long 2097151 +.long 4194303 +.long 8388607 +.long 16777215 +.long 33554431 +.long 67108863 +.long 134217727 +.long 268435455 +.long 536870911 +.long 1073741823 +.long 2147483647 +.long 4294967295 +#endif /* NO_MMX */ + +.text + +/* + * struct z_stream offsets, in zlib.h + */ +#define next_in_strm 0 /* strm->next_in */ +#define avail_in_strm 4 /* strm->avail_in */ +#define next_out_strm 12 /* strm->next_out */ +#define avail_out_strm 16 /* strm->avail_out */ +#define msg_strm 24 /* strm->msg */ +#define state_strm 28 /* strm->state */ + +/* + * struct inflate_state offsets, in inflate.h + */ +#define mode_state 0 /* state->mode */ +#define wsize_state 32 /* state->wsize */ +#define write_state 40 /* state->write */ +#define window_state 44 /* state->window */ +#define hold_state 48 /* state->hold */ +#define bits_state 52 /* state->bits */ +#define lencode_state 68 /* state->lencode */ +#define distcode_state 72 /* state->distcode */ +#define lenbits_state 76 /* state->lenbits */ +#define distbits_state 80 /* state->distbits */ + +/* + * inflate_fast's activation record + */ +#define local_var_size 64 /* how much local space for vars */ +#define strm_sp 88 /* first arg: z_stream * (local_var_size + 24) */ +#define start_sp 92 /* second arg: unsigned int (local_var_size + 28) */ + +/* + * offsets for local vars on stack + */ +#define out 60 /* unsigned char* */ +#define window 56 /* unsigned char* */ +#define wsize 52 /* unsigned int */ +#define write 48 /* unsigned int */ +#define in 44 /* unsigned char* */ +#define beg 40 /* unsigned char* */ +#define buf 28 /* char[ 12 ] */ +#define len 24 /* unsigned int */ +#define last 20 /* unsigned char* */ +#define end 16 /* unsigned char* */ +#define dcode 12 /* code* */ +#define lcode 8 /* code* */ +#define dmask 4 /* unsigned int */ +#define lmask 0 /* unsigned int */ + +/* + * typedef enum inflate_mode consts, in inflate.h + */ +#define INFLATE_MODE_TYPE 11 /* state->mode flags enum-ed in inflate.h */ +#define INFLATE_MODE_BAD 26 + + +#if ! defined( USE_MMX ) && ! defined( NO_MMX ) + +#define RUN_TIME_MMX + +#define CHECK_MMX 1 +#define DO_USE_MMX 2 +#define DONT_USE_MMX 3 + +.globl inflate_fast_use_mmx + +.data + +.align 4,0 +inflate_fast_use_mmx: /* integer flag for run time control 1=check,2=mmx,3=no */ +.long CHECK_MMX + +#if defined( GAS_ELF ) +/* elf info */ +.type inflate_fast_use_mmx,@object +.size inflate_fast_use_mmx,4 +#endif + +#endif /* RUN_TIME_MMX */ + +#if defined( GAS_COFF ) +/* coff info: scl 2 = extern, type 32 = function */ +.def inflate_fast; .scl 2; .type 32; .endef +#endif + +.text + +.align 32,0x90 +inflate_fast: + pushl %edi + pushl %esi + pushl %ebp + pushl %ebx + pushf /* save eflags (strm_sp, state_sp assumes this is 32 bits) */ + subl $local_var_size, %esp + cld + +#define strm_r %esi +#define state_r %edi + + movl strm_sp(%esp), strm_r + movl state_strm(strm_r), state_r + + /* in = strm->next_in; + * out = strm->next_out; + * last = in + strm->avail_in - 11; + * beg = out - (start - strm->avail_out); + * end = out + (strm->avail_out - 257); + */ + movl avail_in_strm(strm_r), %edx + movl next_in_strm(strm_r), %eax + + addl %eax, %edx /* avail_in += next_in */ + subl $11, %edx /* avail_in -= 11 */ + + movl %eax, in(%esp) + movl %edx, last(%esp) + + movl start_sp(%esp), %ebp + movl avail_out_strm(strm_r), %ecx + movl next_out_strm(strm_r), %ebx + + subl %ecx, %ebp /* start -= avail_out */ + negl %ebp /* start = -start */ + addl %ebx, %ebp /* start += next_out */ + + subl $257, %ecx /* avail_out -= 257 */ + addl %ebx, %ecx /* avail_out += out */ + + movl %ebx, out(%esp) + movl %ebp, beg(%esp) + movl %ecx, end(%esp) + + /* wsize = state->wsize; + * write = state->write; + * window = state->window; + * hold = state->hold; + * bits = state->bits; + * lcode = state->lencode; + * dcode = state->distcode; + * lmask = ( 1 << state->lenbits ) - 1; + * dmask = ( 1 << state->distbits ) - 1; + */ + + movl lencode_state(state_r), %eax + movl distcode_state(state_r), %ecx + + movl %eax, lcode(%esp) + movl %ecx, dcode(%esp) + + movl $1, %eax + movl lenbits_state(state_r), %ecx + shll %cl, %eax + decl %eax + movl %eax, lmask(%esp) + + movl $1, %eax + movl distbits_state(state_r), %ecx + shll %cl, %eax + decl %eax + movl %eax, dmask(%esp) + + movl wsize_state(state_r), %eax + movl write_state(state_r), %ecx + movl window_state(state_r), %edx + + movl %eax, wsize(%esp) + movl %ecx, write(%esp) + movl %edx, window(%esp) + + movl hold_state(state_r), %ebp + movl bits_state(state_r), %ebx + +#undef strm_r +#undef state_r + +#define in_r %esi +#define from_r %esi +#define out_r %edi + + movl in(%esp), in_r + movl last(%esp), %ecx + cmpl in_r, %ecx + ja .L_align_long /* if in < last */ + + addl $11, %ecx /* ecx = &in[ avail_in ] */ + subl in_r, %ecx /* ecx = avail_in */ + movl $12, %eax + subl %ecx, %eax /* eax = 12 - avail_in */ + leal buf(%esp), %edi + rep movsb /* memcpy( buf, in, avail_in ) */ + movl %eax, %ecx + xorl %eax, %eax + rep stosb /* memset( &buf[ avail_in ], 0, 12 - avail_in ) */ + leal buf(%esp), in_r /* in = buf */ + movl in_r, last(%esp) /* last = in, do just one iteration */ + jmp .L_is_aligned + + /* align in_r on long boundary */ +.L_align_long: + testl $3, in_r + jz .L_is_aligned + xorl %eax, %eax + movb (in_r), %al + incl in_r + movl %ebx, %ecx + addl $8, %ebx + shll %cl, %eax + orl %eax, %ebp + jmp .L_align_long + +.L_is_aligned: + movl out(%esp), out_r + +#if defined( NO_MMX ) + jmp .L_do_loop +#endif + +#if defined( USE_MMX ) + jmp .L_init_mmx +#endif + +/*** Runtime MMX check ***/ + +#if defined( RUN_TIME_MMX ) +.L_check_mmx: + cmpl $DO_USE_MMX, inflate_fast_use_mmx + je .L_init_mmx + ja .L_do_loop /* > 2 */ + + pushl %eax + pushl %ebx + pushl %ecx + pushl %edx + pushf + movl (%esp), %eax /* copy eflags to eax */ + xorl $0x200000, (%esp) /* try toggling ID bit of eflags (bit 21) + * to see if cpu supports cpuid... + * ID bit method not supported by NexGen but + * bios may load a cpuid instruction and + * cpuid may be disabled on Cyrix 5-6x86 */ + popf + pushf + popl %edx /* copy new eflags to edx */ + xorl %eax, %edx /* test if ID bit is flipped */ + jz .L_dont_use_mmx /* not flipped if zero */ + xorl %eax, %eax + cpuid + cmpl $0x756e6547, %ebx /* check for GenuineIntel in ebx,ecx,edx */ + jne .L_dont_use_mmx + cmpl $0x6c65746e, %ecx + jne .L_dont_use_mmx + cmpl $0x49656e69, %edx + jne .L_dont_use_mmx + movl $1, %eax + cpuid /* get cpu features */ + shrl $8, %eax + andl $15, %eax + cmpl $6, %eax /* check for Pentium family, is 0xf for P4 */ + jne .L_dont_use_mmx + testl $0x800000, %edx /* test if MMX feature is set (bit 23) */ + jnz .L_use_mmx + jmp .L_dont_use_mmx +.L_use_mmx: + movl $DO_USE_MMX, inflate_fast_use_mmx + jmp .L_check_mmx_pop +.L_dont_use_mmx: + movl $DONT_USE_MMX, inflate_fast_use_mmx +.L_check_mmx_pop: + popl %edx + popl %ecx + popl %ebx + popl %eax + jmp .L_check_mmx +#endif + + +/*** Non-MMX code ***/ + +#if defined ( NO_MMX ) || defined( RUN_TIME_MMX ) + +#define hold_r %ebp +#define bits_r %bl +#define bitslong_r %ebx + +.align 32,0x90 +.L_while_test: + /* while (in < last && out < end) + */ + cmpl out_r, end(%esp) + jbe .L_break_loop /* if (out >= end) */ + + cmpl in_r, last(%esp) + jbe .L_break_loop + +.L_do_loop: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out + * + * do { + * if (bits < 15) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * this = lcode[hold & lmask] + */ + cmpb $15, bits_r + ja .L_get_length_code /* if (15 < bits) */ + + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + +.L_get_length_code: + movl lmask(%esp), %edx /* edx = lmask */ + movl lcode(%esp), %ecx /* ecx = lcode */ + andl hold_r, %edx /* edx &= hold */ + movl (%ecx,%edx,4), %eax /* eax = lcode[hold & lmask] */ + +.L_dolen: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out + * + * dolen: + * bits -= this.bits; + * hold >>= this.bits + */ + movb %ah, %cl /* cl = this.bits */ + subb %ah, bits_r /* bits -= this.bits */ + shrl %cl, hold_r /* hold >>= this.bits */ + + /* check if op is a literal + * if (op == 0) { + * PUP(out) = this.val; + * } + */ + testb %al, %al + jnz .L_test_for_length_base /* if (op != 0) 45.7% */ + + shrl $16, %eax /* output this.val char */ + stosb + jmp .L_while_test + +.L_test_for_length_base: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out, %edx = len + * + * else if (op & 16) { + * len = this.val + * op &= 15 + * if (op) { + * if (op > bits) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * len += hold & mask[op]; + * bits -= op; + * hold >>= op; + * } + */ +#define len_r %edx + movl %eax, len_r /* len = this */ + shrl $16, len_r /* len = this.val */ + movb %al, %cl + + testb $16, %al + jz .L_test_for_second_level_length /* if ((op & 16) == 0) 8% */ + andb $15, %cl /* op &= 15 */ + jz .L_save_len /* if (!op) */ + cmpb %cl, bits_r + jae .L_add_bits_to_len /* if (op <= bits) */ + + movb %cl, %ch /* stash op in ch, freeing cl */ + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + movb %ch, %cl /* move op back to ecx */ + +.L_add_bits_to_len: + movl $1, %eax + shll %cl, %eax + decl %eax + subb %cl, bits_r + andl hold_r, %eax /* eax &= hold */ + shrl %cl, hold_r + addl %eax, len_r /* len += hold & mask[op] */ + +.L_save_len: + movl len_r, len(%esp) /* save len */ +#undef len_r + +.L_decode_distance: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * + * if (bits < 15) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * this = dcode[hold & dmask]; + * dodist: + * bits -= this.bits; + * hold >>= this.bits; + * op = this.op; + */ + + cmpb $15, bits_r + ja .L_get_distance_code /* if (15 < bits) */ + + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + +.L_get_distance_code: + movl dmask(%esp), %edx /* edx = dmask */ + movl dcode(%esp), %ecx /* ecx = dcode */ + andl hold_r, %edx /* edx &= hold */ + movl (%ecx,%edx,4), %eax /* eax = dcode[hold & dmask] */ + +#define dist_r %edx +.L_dodist: + movl %eax, dist_r /* dist = this */ + shrl $16, dist_r /* dist = this.val */ + movb %ah, %cl + subb %ah, bits_r /* bits -= this.bits */ + shrl %cl, hold_r /* hold >>= this.bits */ + + /* if (op & 16) { + * dist = this.val + * op &= 15 + * if (op > bits) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * dist += hold & mask[op]; + * bits -= op; + * hold >>= op; + */ + movb %al, %cl /* cl = this.op */ + + testb $16, %al /* if ((op & 16) == 0) */ + jz .L_test_for_second_level_dist + andb $15, %cl /* op &= 15 */ + jz .L_check_dist_one + cmpb %cl, bits_r + jae .L_add_bits_to_dist /* if (op <= bits) 97.6% */ + + movb %cl, %ch /* stash op in ch, freeing cl */ + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + movb %ch, %cl /* move op back to ecx */ + +.L_add_bits_to_dist: + movl $1, %eax + shll %cl, %eax + decl %eax /* (1 << op) - 1 */ + subb %cl, bits_r + andl hold_r, %eax /* eax &= hold */ + shrl %cl, hold_r + addl %eax, dist_r /* dist += hold & ((1 << op) - 1) */ + jmp .L_check_window + +.L_check_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes + * + * nbytes = out - beg; + * if (dist <= nbytes) { + * from = out - dist; + * do { + * PUP(out) = PUP(from); + * } while (--len > 0) { + * } + */ + + movl in_r, in(%esp) /* save in so from can use it's reg */ + movl out_r, %eax + subl beg(%esp), %eax /* nbytes = out - beg */ + + cmpl dist_r, %eax + jb .L_clip_window /* if (dist > nbytes) 4.2% */ + + movl len(%esp), %ecx + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + + subl $3, %ecx + movb (from_r), %al + movb %al, (out_r) + movb 1(from_r), %al + movb 2(from_r), %dl + addl $3, from_r + movb %al, 1(out_r) + movb %dl, 2(out_r) + addl $3, out_r + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + jmp .L_while_test + +.align 16,0x90 +.L_check_dist_one: + cmpl $1, dist_r + jne .L_check_window + cmpl out_r, beg(%esp) + je .L_check_window + + decl out_r + movl len(%esp), %ecx + movb (out_r), %al + subl $3, %ecx + + movb %al, 1(out_r) + movb %al, 2(out_r) + movb %al, 3(out_r) + addl $4, out_r + rep stosb + + jmp .L_while_test + +.align 16,0x90 +.L_test_for_second_level_length: + /* else if ((op & 64) == 0) { + * this = lcode[this.val + (hold & mask[op])]; + * } + */ + testb $64, %al + jnz .L_test_for_end_of_block /* if ((op & 64) != 0) */ + + movl $1, %eax + shll %cl, %eax + decl %eax + andl hold_r, %eax /* eax &= hold */ + addl %edx, %eax /* eax += this.val */ + movl lcode(%esp), %edx /* edx = lcode */ + movl (%edx,%eax,4), %eax /* eax = lcode[val + (hold&mask[op])] */ + jmp .L_dolen + +.align 16,0x90 +.L_test_for_second_level_dist: + /* else if ((op & 64) == 0) { + * this = dcode[this.val + (hold & mask[op])]; + * } + */ + testb $64, %al + jnz .L_invalid_distance_code /* if ((op & 64) != 0) */ + + movl $1, %eax + shll %cl, %eax + decl %eax + andl hold_r, %eax /* eax &= hold */ + addl %edx, %eax /* eax += this.val */ + movl dcode(%esp), %edx /* edx = dcode */ + movl (%edx,%eax,4), %eax /* eax = dcode[val + (hold&mask[op])] */ + jmp .L_dodist + +.align 16,0x90 +.L_clip_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes + * + * else { + * if (dist > wsize) { + * invalid distance + * } + * from = window; + * nbytes = dist - nbytes; + * if (write == 0) { + * from += wsize - nbytes; + */ +#define nbytes_r %ecx + movl %eax, nbytes_r + movl wsize(%esp), %eax /* prepare for dist compare */ + negl nbytes_r /* nbytes = -nbytes */ + movl window(%esp), from_r /* from = window */ + + cmpl dist_r, %eax + jb .L_invalid_distance_too_far /* if (dist > wsize) */ + + addl dist_r, nbytes_r /* nbytes = dist - nbytes */ + cmpl $0, write(%esp) + jne .L_wrap_around_window /* if (write != 0) */ + + subl nbytes_r, %eax + addl %eax, from_r /* from += wsize - nbytes */ + + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes, %eax = len + * + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while (--nbytes); + * from = out - dist; + * } + * } + */ +#define len_r %eax + movl len(%esp), len_r + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1 + + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1 + +.L_wrap_around_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes, %eax = write, %eax = len + * + * else if (write < nbytes) { + * from += wsize + write - nbytes; + * nbytes -= write; + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while (--nbytes); + * from = window; + * nbytes = write; + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while(--nbytes); + * from = out - dist; + * } + * } + * } + */ +#define write_r %eax + movl write(%esp), write_r + cmpl write_r, nbytes_r + jbe .L_contiguous_in_window /* if (write >= nbytes) */ + + addl wsize(%esp), from_r + addl write_r, from_r + subl nbytes_r, from_r /* from += wsize + write - nbytes */ + subl write_r, nbytes_r /* nbytes -= write */ +#undef write_r + + movl len(%esp), len_r + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl window(%esp), from_r /* from = window */ + movl write(%esp), nbytes_r /* nbytes = write */ + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1 + +.L_contiguous_in_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes, %eax = write, %eax = len + * + * else { + * from += write - nbytes; + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while (--nbytes); + * from = out - dist; + * } + * } + */ +#define write_r %eax + addl write_r, from_r + subl nbytes_r, from_r /* from += write - nbytes */ +#undef write_r + + movl len(%esp), len_r + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + +.L_do_copy1: + /* regs: %esi = from, %esi = in, %ebp = hold, %bl = bits, %edi = out + * %eax = len + * + * while (len > 0) { + * PUP(out) = PUP(from); + * len--; + * } + * } + * } while (in < last && out < end); + */ +#undef nbytes_r +#define in_r %esi + movl len_r, %ecx + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + jmp .L_while_test + +#undef len_r +#undef dist_r + +#endif /* NO_MMX || RUN_TIME_MMX */ + + +/*** MMX code ***/ + +#if defined( USE_MMX ) || defined( RUN_TIME_MMX ) + +.align 32,0x90 +.L_init_mmx: + emms + +#undef bits_r +#undef bitslong_r +#define bitslong_r %ebp +#define hold_mm %mm0 + movd %ebp, hold_mm + movl %ebx, bitslong_r + +#define used_mm %mm1 +#define dmask2_mm %mm2 +#define lmask2_mm %mm3 +#define lmask_mm %mm4 +#define dmask_mm %mm5 +#define tmp_mm %mm6 + + movd lmask(%esp), lmask_mm + movq lmask_mm, lmask2_mm + movd dmask(%esp), dmask_mm + movq dmask_mm, dmask2_mm + pxor used_mm, used_mm + movl lcode(%esp), %ebx /* ebx = lcode */ + jmp .L_do_loop_mmx + +.align 32,0x90 +.L_while_test_mmx: + /* while (in < last && out < end) + */ + cmpl out_r, end(%esp) + jbe .L_break_loop /* if (out >= end) */ + + cmpl in_r, last(%esp) + jbe .L_break_loop + +.L_do_loop_mmx: + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + + cmpl $32, bitslong_r + ja .L_get_length_code_mmx /* if (32 < bits) */ + + movd bitslong_r, tmp_mm + movd (in_r), %mm7 + addl $4, in_r + psllq tmp_mm, %mm7 + addl $32, bitslong_r + por %mm7, hold_mm /* hold_mm |= *((uint *)in)++ << bits */ + +.L_get_length_code_mmx: + pand hold_mm, lmask_mm + movd lmask_mm, %eax + movq lmask2_mm, lmask_mm + movl (%ebx,%eax,4), %eax /* eax = lcode[hold & lmask] */ + +.L_dolen_mmx: + movzbl %ah, %ecx /* ecx = this.bits */ + movd %ecx, used_mm + subl %ecx, bitslong_r /* bits -= this.bits */ + + testb %al, %al + jnz .L_test_for_length_base_mmx /* if (op != 0) 45.7% */ + + shrl $16, %eax /* output this.val char */ + stosb + jmp .L_while_test_mmx + +.L_test_for_length_base_mmx: +#define len_r %edx + movl %eax, len_r /* len = this */ + shrl $16, len_r /* len = this.val */ + + testb $16, %al + jz .L_test_for_second_level_length_mmx /* if ((op & 16) == 0) 8% */ + andl $15, %eax /* op &= 15 */ + jz .L_decode_distance_mmx /* if (!op) */ + + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd %eax, used_mm + movd hold_mm, %ecx + subl %eax, bitslong_r + andl .L_mask(,%eax,4), %ecx + addl %ecx, len_r /* len += hold & mask[op] */ + +.L_decode_distance_mmx: + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + + cmpl $32, bitslong_r + ja .L_get_dist_code_mmx /* if (32 < bits) */ + + movd bitslong_r, tmp_mm + movd (in_r), %mm7 + addl $4, in_r + psllq tmp_mm, %mm7 + addl $32, bitslong_r + por %mm7, hold_mm /* hold_mm |= *((uint *)in)++ << bits */ + +.L_get_dist_code_mmx: + movl dcode(%esp), %ebx /* ebx = dcode */ + pand hold_mm, dmask_mm + movd dmask_mm, %eax + movq dmask2_mm, dmask_mm + movl (%ebx,%eax,4), %eax /* eax = dcode[hold & lmask] */ + +.L_dodist_mmx: +#define dist_r %ebx + movzbl %ah, %ecx /* ecx = this.bits */ + movl %eax, dist_r + shrl $16, dist_r /* dist = this.val */ + subl %ecx, bitslong_r /* bits -= this.bits */ + movd %ecx, used_mm + + testb $16, %al /* if ((op & 16) == 0) */ + jz .L_test_for_second_level_dist_mmx + andl $15, %eax /* op &= 15 */ + jz .L_check_dist_one_mmx + +.L_add_bits_to_dist_mmx: + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd %eax, used_mm /* save bit length of current op */ + movd hold_mm, %ecx /* get the next bits on input stream */ + subl %eax, bitslong_r /* bits -= op bits */ + andl .L_mask(,%eax,4), %ecx /* ecx = hold & mask[op] */ + addl %ecx, dist_r /* dist += hold & mask[op] */ + +.L_check_window_mmx: + movl in_r, in(%esp) /* save in so from can use it's reg */ + movl out_r, %eax + subl beg(%esp), %eax /* nbytes = out - beg */ + + cmpl dist_r, %eax + jb .L_clip_window_mmx /* if (dist > nbytes) 4.2% */ + + movl len_r, %ecx + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + + subl $3, %ecx + movb (from_r), %al + movb %al, (out_r) + movb 1(from_r), %al + movb 2(from_r), %dl + addl $3, from_r + movb %al, 1(out_r) + movb %dl, 2(out_r) + addl $3, out_r + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */ + jmp .L_while_test_mmx + +.align 16,0x90 +.L_check_dist_one_mmx: + cmpl $1, dist_r + jne .L_check_window_mmx + cmpl out_r, beg(%esp) + je .L_check_window_mmx + + decl out_r + movl len_r, %ecx + movb (out_r), %al + subl $3, %ecx + + movb %al, 1(out_r) + movb %al, 2(out_r) + movb %al, 3(out_r) + addl $4, out_r + rep stosb + + movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */ + jmp .L_while_test_mmx + +.align 16,0x90 +.L_test_for_second_level_length_mmx: + testb $64, %al + jnz .L_test_for_end_of_block /* if ((op & 64) != 0) */ + + andl $15, %eax + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd hold_mm, %ecx + andl .L_mask(,%eax,4), %ecx + addl len_r, %ecx + movl (%ebx,%ecx,4), %eax /* eax = lcode[hold & lmask] */ + jmp .L_dolen_mmx + +.align 16,0x90 +.L_test_for_second_level_dist_mmx: + testb $64, %al + jnz .L_invalid_distance_code /* if ((op & 64) != 0) */ + + andl $15, %eax + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd hold_mm, %ecx + andl .L_mask(,%eax,4), %ecx + movl dcode(%esp), %eax /* ecx = dcode */ + addl dist_r, %ecx + movl (%eax,%ecx,4), %eax /* eax = lcode[hold & lmask] */ + jmp .L_dodist_mmx + +.align 16,0x90 +.L_clip_window_mmx: +#define nbytes_r %ecx + movl %eax, nbytes_r + movl wsize(%esp), %eax /* prepare for dist compare */ + negl nbytes_r /* nbytes = -nbytes */ + movl window(%esp), from_r /* from = window */ + + cmpl dist_r, %eax + jb .L_invalid_distance_too_far /* if (dist > wsize) */ + + addl dist_r, nbytes_r /* nbytes = dist - nbytes */ + cmpl $0, write(%esp) + jne .L_wrap_around_window_mmx /* if (write != 0) */ + + subl nbytes_r, %eax + addl %eax, from_r /* from += wsize - nbytes */ + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1_mmx + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1_mmx + +.L_wrap_around_window_mmx: +#define write_r %eax + movl write(%esp), write_r + cmpl write_r, nbytes_r + jbe .L_contiguous_in_window_mmx /* if (write >= nbytes) */ + + addl wsize(%esp), from_r + addl write_r, from_r + subl nbytes_r, from_r /* from += wsize + write - nbytes */ + subl write_r, nbytes_r /* nbytes -= write */ +#undef write_r + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl window(%esp), from_r /* from = window */ + movl write(%esp), nbytes_r /* nbytes = write */ + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1_mmx + +.L_contiguous_in_window_mmx: +#define write_r %eax + addl write_r, from_r + subl nbytes_r, from_r /* from += write - nbytes */ +#undef write_r + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + +.L_do_copy1_mmx: +#undef nbytes_r +#define in_r %esi + movl len_r, %ecx + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */ + jmp .L_while_test_mmx + +#undef hold_r +#undef bitslong_r + +#endif /* USE_MMX || RUN_TIME_MMX */ + + +/*** USE_MMX, NO_MMX, and RUNTIME_MMX from here on ***/ + +.L_invalid_distance_code: + /* else { + * strm->msg = "invalid distance code"; + * state->mode = BAD; + * } + */ + movl $.L_invalid_distance_code_msg, %ecx + movl $INFLATE_MODE_BAD, %edx + jmp .L_update_stream_state + +.L_test_for_end_of_block: + /* else if (op & 32) { + * state->mode = TYPE; + * break; + * } + */ + testb $32, %al + jz .L_invalid_literal_length_code /* if ((op & 32) == 0) */ + + movl $0, %ecx + movl $INFLATE_MODE_TYPE, %edx + jmp .L_update_stream_state + +.L_invalid_literal_length_code: + /* else { + * strm->msg = "invalid literal/length code"; + * state->mode = BAD; + * } + */ + movl $.L_invalid_literal_length_code_msg, %ecx + movl $INFLATE_MODE_BAD, %edx + jmp .L_update_stream_state + +.L_invalid_distance_too_far: + /* strm->msg = "invalid distance too far back"; + * state->mode = BAD; + */ + movl in(%esp), in_r /* from_r has in's reg, put in back */ + movl $.L_invalid_distance_too_far_msg, %ecx + movl $INFLATE_MODE_BAD, %edx + jmp .L_update_stream_state + +.L_update_stream_state: + /* set strm->msg = %ecx, strm->state->mode = %edx */ + movl strm_sp(%esp), %eax + testl %ecx, %ecx /* if (msg != NULL) */ + jz .L_skip_msg + movl %ecx, msg_strm(%eax) /* strm->msg = msg */ +.L_skip_msg: + movl state_strm(%eax), %eax /* state = strm->state */ + movl %edx, mode_state(%eax) /* state->mode = edx (BAD | TYPE) */ + jmp .L_break_loop + +.align 32,0x90 +.L_break_loop: + +/* + * Regs: + * + * bits = %ebp when mmx, and in %ebx when non-mmx + * hold = %hold_mm when mmx, and in %ebp when non-mmx + * in = %esi + * out = %edi + */ + +#if defined( USE_MMX ) || defined( RUN_TIME_MMX ) + +#if defined( RUN_TIME_MMX ) + + cmpl $DO_USE_MMX, inflate_fast_use_mmx + jne .L_update_next_in + +#endif /* RUN_TIME_MMX */ + + movl %ebp, %ebx + +.L_update_next_in: + +#endif + +#define strm_r %eax +#define state_r %edx + + /* len = bits >> 3; + * in -= len; + * bits -= len << 3; + * hold &= (1U << bits) - 1; + * state->hold = hold; + * state->bits = bits; + * strm->next_in = in; + * strm->next_out = out; + */ + movl strm_sp(%esp), strm_r + movl %ebx, %ecx + movl state_strm(strm_r), state_r + shrl $3, %ecx + subl %ecx, in_r + shll $3, %ecx + subl %ecx, %ebx + movl out_r, next_out_strm(strm_r) + movl %ebx, bits_state(state_r) + movl %ebx, %ecx + + leal buf(%esp), %ebx + cmpl %ebx, last(%esp) + jne .L_buf_not_used /* if buf != last */ + + subl %ebx, in_r /* in -= buf */ + movl next_in_strm(strm_r), %ebx + movl %ebx, last(%esp) /* last = strm->next_in */ + addl %ebx, in_r /* in += strm->next_in */ + movl avail_in_strm(strm_r), %ebx + subl $11, %ebx + addl %ebx, last(%esp) /* last = &strm->next_in[ avail_in - 11 ] */ + +.L_buf_not_used: + movl in_r, next_in_strm(strm_r) + + movl $1, %ebx + shll %cl, %ebx + decl %ebx + +#if defined( USE_MMX ) || defined( RUN_TIME_MMX ) + +#if defined( RUN_TIME_MMX ) + + cmpl $DO_USE_MMX, inflate_fast_use_mmx + jne .L_update_hold + +#endif /* RUN_TIME_MMX */ + + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd hold_mm, %ebp + + emms + +.L_update_hold: + +#endif /* USE_MMX || RUN_TIME_MMX */ + + andl %ebx, %ebp + movl %ebp, hold_state(state_r) + +#define last_r %ebx + + /* strm->avail_in = in < last ? 11 + (last - in) : 11 - (in - last) */ + movl last(%esp), last_r + cmpl in_r, last_r + jbe .L_last_is_smaller /* if (in >= last) */ + + subl in_r, last_r /* last -= in */ + addl $11, last_r /* last += 11 */ + movl last_r, avail_in_strm(strm_r) + jmp .L_fixup_out +.L_last_is_smaller: + subl last_r, in_r /* in -= last */ + negl in_r /* in = -in */ + addl $11, in_r /* in += 11 */ + movl in_r, avail_in_strm(strm_r) + +#undef last_r +#define end_r %ebx + +.L_fixup_out: + /* strm->avail_out = out < end ? 257 + (end - out) : 257 - (out - end)*/ + movl end(%esp), end_r + cmpl out_r, end_r + jbe .L_end_is_smaller /* if (out >= end) */ + + subl out_r, end_r /* end -= out */ + addl $257, end_r /* end += 257 */ + movl end_r, avail_out_strm(strm_r) + jmp .L_done +.L_end_is_smaller: + subl end_r, out_r /* out -= end */ + negl out_r /* out = -out */ + addl $257, out_r /* out += 257 */ + movl out_r, avail_out_strm(strm_r) + +#undef end_r +#undef strm_r +#undef state_r + +.L_done: + addl $local_var_size, %esp + popf + popl %ebx + popl %ebp + popl %esi + popl %edi + ret + +#if defined( GAS_ELF ) +/* elf info */ +.type inflate_fast,@function +.size inflate_fast,.-inflate_fast +#endif diff --git a/src/SDL2/external/zlib-1.2.8/contrib/iostream/test.cpp b/src/SDL2/external/zlib-1.2.8/contrib/iostream/test.cpp new file mode 100644 index 000000000..7d265b3b5 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/iostream/test.cpp @@ -0,0 +1,24 @@ + +#include "zfstream.h" + +int main() { + + // Construct a stream object with this filebuffer. Anything sent + // to this stream will go to standard out. + gzofstream os( 1, ios::out ); + + // This text is getting compressed and sent to stdout. + // To prove this, run 'test | zcat'. + os << "Hello, Mommy" << endl; + + os << setcompressionlevel( Z_NO_COMPRESSION ); + os << "hello, hello, hi, ho!" << endl; + + setcompressionlevel( os, Z_DEFAULT_COMPRESSION ) + << "I'm compressing again" << endl; + + os.close(); + + return 0; + +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/iostream/zfstream.cpp b/src/SDL2/external/zlib-1.2.8/contrib/iostream/zfstream.cpp new file mode 100644 index 000000000..d0cd85faa --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/iostream/zfstream.cpp @@ -0,0 +1,329 @@ + +#include "zfstream.h" + +gzfilebuf::gzfilebuf() : + file(NULL), + mode(0), + own_file_descriptor(0) +{ } + +gzfilebuf::~gzfilebuf() { + + sync(); + if ( own_file_descriptor ) + close(); + +} + +gzfilebuf *gzfilebuf::open( const char *name, + int io_mode ) { + + if ( is_open() ) + return NULL; + + char char_mode[10]; + char *p = char_mode; + + if ( io_mode & ios::in ) { + mode = ios::in; + *p++ = 'r'; + } else if ( io_mode & ios::app ) { + mode = ios::app; + *p++ = 'a'; + } else { + mode = ios::out; + *p++ = 'w'; + } + + if ( io_mode & ios::binary ) { + mode |= ios::binary; + *p++ = 'b'; + } + + // Hard code the compression level + if ( io_mode & (ios::out|ios::app )) { + *p++ = '9'; + } + + // Put the end-of-string indicator + *p = '\0'; + + if ( (file = gzopen(name, char_mode)) == NULL ) + return NULL; + + own_file_descriptor = 1; + + return this; + +} + +gzfilebuf *gzfilebuf::attach( int file_descriptor, + int io_mode ) { + + if ( is_open() ) + return NULL; + + char char_mode[10]; + char *p = char_mode; + + if ( io_mode & ios::in ) { + mode = ios::in; + *p++ = 'r'; + } else if ( io_mode & ios::app ) { + mode = ios::app; + *p++ = 'a'; + } else { + mode = ios::out; + *p++ = 'w'; + } + + if ( io_mode & ios::binary ) { + mode |= ios::binary; + *p++ = 'b'; + } + + // Hard code the compression level + if ( io_mode & (ios::out|ios::app )) { + *p++ = '9'; + } + + // Put the end-of-string indicator + *p = '\0'; + + if ( (file = gzdopen(file_descriptor, char_mode)) == NULL ) + return NULL; + + own_file_descriptor = 0; + + return this; + +} + +gzfilebuf *gzfilebuf::close() { + + if ( is_open() ) { + + sync(); + gzclose( file ); + file = NULL; + + } + + return this; + +} + +int gzfilebuf::setcompressionlevel( int comp_level ) { + + return gzsetparams(file, comp_level, -2); + +} + +int gzfilebuf::setcompressionstrategy( int comp_strategy ) { + + return gzsetparams(file, -2, comp_strategy); + +} + + +streampos gzfilebuf::seekoff( streamoff off, ios::seek_dir dir, int which ) { + + return streampos(EOF); + +} + +int gzfilebuf::underflow() { + + // If the file hasn't been opened for reading, error. + if ( !is_open() || !(mode & ios::in) ) + return EOF; + + // if a buffer doesn't exists, allocate one. + if ( !base() ) { + + if ( (allocate()) == EOF ) + return EOF; + setp(0,0); + + } else { + + if ( in_avail() ) + return (unsigned char) *gptr(); + + if ( out_waiting() ) { + if ( flushbuf() == EOF ) + return EOF; + } + + } + + // Attempt to fill the buffer. + + int result = fillbuf(); + if ( result == EOF ) { + // disable get area + setg(0,0,0); + return EOF; + } + + return (unsigned char) *gptr(); + +} + +int gzfilebuf::overflow( int c ) { + + if ( !is_open() || !(mode & ios::out) ) + return EOF; + + if ( !base() ) { + if ( allocate() == EOF ) + return EOF; + setg(0,0,0); + } else { + if (in_avail()) { + return EOF; + } + if (out_waiting()) { + if (flushbuf() == EOF) + return EOF; + } + } + + int bl = blen(); + setp( base(), base() + bl); + + if ( c != EOF ) { + + *pptr() = c; + pbump(1); + + } + + return 0; + +} + +int gzfilebuf::sync() { + + if ( !is_open() ) + return EOF; + + if ( out_waiting() ) + return flushbuf(); + + return 0; + +} + +int gzfilebuf::flushbuf() { + + int n; + char *q; + + q = pbase(); + n = pptr() - q; + + if ( gzwrite( file, q, n) < n ) + return EOF; + + setp(0,0); + + return 0; + +} + +int gzfilebuf::fillbuf() { + + int required; + char *p; + + p = base(); + + required = blen(); + + int t = gzread( file, p, required ); + + if ( t <= 0) return EOF; + + setg( base(), base(), base()+t); + + return t; + +} + +gzfilestream_common::gzfilestream_common() : + ios( gzfilestream_common::rdbuf() ) +{ } + +gzfilestream_common::~gzfilestream_common() +{ } + +void gzfilestream_common::attach( int fd, int io_mode ) { + + if ( !buffer.attach( fd, io_mode) ) + clear( ios::failbit | ios::badbit ); + else + clear(); + +} + +void gzfilestream_common::open( const char *name, int io_mode ) { + + if ( !buffer.open( name, io_mode ) ) + clear( ios::failbit | ios::badbit ); + else + clear(); + +} + +void gzfilestream_common::close() { + + if ( !buffer.close() ) + clear( ios::failbit | ios::badbit ); + +} + +gzfilebuf *gzfilestream_common::rdbuf() +{ + return &buffer; +} + +gzifstream::gzifstream() : + ios( gzfilestream_common::rdbuf() ) +{ + clear( ios::badbit ); +} + +gzifstream::gzifstream( const char *name, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::open( name, io_mode ); +} + +gzifstream::gzifstream( int fd, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::attach( fd, io_mode ); +} + +gzifstream::~gzifstream() { } + +gzofstream::gzofstream() : + ios( gzfilestream_common::rdbuf() ) +{ + clear( ios::badbit ); +} + +gzofstream::gzofstream( const char *name, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::open( name, io_mode ); +} + +gzofstream::gzofstream( int fd, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::attach( fd, io_mode ); +} + +gzofstream::~gzofstream() { } diff --git a/src/SDL2/external/zlib-1.2.8/contrib/iostream/zfstream.h b/src/SDL2/external/zlib-1.2.8/contrib/iostream/zfstream.h new file mode 100644 index 000000000..ed79098a3 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/iostream/zfstream.h @@ -0,0 +1,128 @@ + +#ifndef zfstream_h +#define zfstream_h + +#include +#include "zlib.h" + +class gzfilebuf : public streambuf { + +public: + + gzfilebuf( ); + virtual ~gzfilebuf(); + + gzfilebuf *open( const char *name, int io_mode ); + gzfilebuf *attach( int file_descriptor, int io_mode ); + gzfilebuf *close(); + + int setcompressionlevel( int comp_level ); + int setcompressionstrategy( int comp_strategy ); + + inline int is_open() const { return (file !=NULL); } + + virtual streampos seekoff( streamoff, ios::seek_dir, int ); + + virtual int sync(); + +protected: + + virtual int underflow(); + virtual int overflow( int = EOF ); + +private: + + gzFile file; + short mode; + short own_file_descriptor; + + int flushbuf(); + int fillbuf(); + +}; + +class gzfilestream_common : virtual public ios { + + friend class gzifstream; + friend class gzofstream; + friend gzofstream &setcompressionlevel( gzofstream &, int ); + friend gzofstream &setcompressionstrategy( gzofstream &, int ); + +public: + virtual ~gzfilestream_common(); + + void attach( int fd, int io_mode ); + void open( const char *name, int io_mode ); + void close(); + +protected: + gzfilestream_common(); + +private: + gzfilebuf *rdbuf(); + + gzfilebuf buffer; + +}; + +class gzifstream : public gzfilestream_common, public istream { + +public: + + gzifstream(); + gzifstream( const char *name, int io_mode = ios::in ); + gzifstream( int fd, int io_mode = ios::in ); + + virtual ~gzifstream(); + +}; + +class gzofstream : public gzfilestream_common, public ostream { + +public: + + gzofstream(); + gzofstream( const char *name, int io_mode = ios::out ); + gzofstream( int fd, int io_mode = ios::out ); + + virtual ~gzofstream(); + +}; + +template class gzomanip { + friend gzofstream &operator<<(gzofstream &, const gzomanip &); +public: + gzomanip(gzofstream &(*f)(gzofstream &, T), T v) : func(f), val(v) { } +private: + gzofstream &(*func)(gzofstream &, T); + T val; +}; + +template gzofstream &operator<<(gzofstream &s, const gzomanip &m) +{ + return (*m.func)(s, m.val); +} + +inline gzofstream &setcompressionlevel( gzofstream &s, int l ) +{ + (s.rdbuf())->setcompressionlevel(l); + return s; +} + +inline gzofstream &setcompressionstrategy( gzofstream &s, int l ) +{ + (s.rdbuf())->setcompressionstrategy(l); + return s; +} + +inline gzomanip setcompressionlevel(int l) +{ + return gzomanip(&setcompressionlevel,l); +} + +inline gzomanip setcompressionstrategy(int l) +{ + return gzomanip(&setcompressionstrategy,l); +} + +#endif diff --git a/src/SDL2/external/zlib-1.2.8/contrib/iostream2/zstream.h b/src/SDL2/external/zlib-1.2.8/contrib/iostream2/zstream.h new file mode 100644 index 000000000..43d2332b7 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/iostream2/zstream.h @@ -0,0 +1,307 @@ +/* + * + * Copyright (c) 1997 + * Christian Michelsen Research AS + * Advanced Computing + * Fantoftvegen 38, 5036 BERGEN, Norway + * http://www.cmr.no + * + * Permission to use, copy, modify, distribute and sell this software + * and its documentation for any purpose is hereby granted without fee, + * provided that the above copyright notice appear in all copies and + * that both that copyright notice and this permission notice appear + * in supporting documentation. Christian Michelsen Research AS makes no + * representations about the suitability of this software for any + * purpose. It is provided "as is" without express or implied warranty. + * + */ + +#ifndef ZSTREAM__H +#define ZSTREAM__H + +/* + * zstream.h - C++ interface to the 'zlib' general purpose compression library + * $Id: zstream.h 1.1 1997-06-25 12:00:56+02 tyge Exp tyge $ + */ + +#include +#include +#include +#include "zlib.h" + +#if defined(_WIN32) +# include +# include +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +class zstringlen { +public: + zstringlen(class izstream&); + zstringlen(class ozstream&, const char*); + size_t value() const { return val.word; } +private: + struct Val { unsigned char byte; size_t word; } val; +}; + +// ----------------------------- izstream ----------------------------- + +class izstream +{ + public: + izstream() : m_fp(0) {} + izstream(FILE* fp) : m_fp(0) { open(fp); } + izstream(const char* name) : m_fp(0) { open(name); } + ~izstream() { close(); } + + /* Opens a gzip (.gz) file for reading. + * open() can be used to read a file which is not in gzip format; + * in this case read() will directly read from the file without + * decompression. errno can be checked to distinguish two error + * cases (if errno is zero, the zlib error is Z_MEM_ERROR). + */ + void open(const char* name) { + if (m_fp) close(); + m_fp = ::gzopen(name, "rb"); + } + + void open(FILE* fp) { + SET_BINARY_MODE(fp); + if (m_fp) close(); + m_fp = ::gzdopen(fileno(fp), "rb"); + } + + /* Flushes all pending input if necessary, closes the compressed file + * and deallocates all the (de)compression state. The return value is + * the zlib error number (see function error() below). + */ + int close() { + int r = ::gzclose(m_fp); + m_fp = 0; return r; + } + + /* Binary read the given number of bytes from the compressed file. + */ + int read(void* buf, size_t len) { + return ::gzread(m_fp, buf, len); + } + + /* Returns the error message for the last error which occurred on the + * given compressed file. errnum is set to zlib error number. If an + * error occurred in the file system and not in the compression library, + * errnum is set to Z_ERRNO and the application may consult errno + * to get the exact error code. + */ + const char* error(int* errnum) { + return ::gzerror(m_fp, errnum); + } + + gzFile fp() { return m_fp; } + + private: + gzFile m_fp; +}; + +/* + * Binary read the given (array of) object(s) from the compressed file. + * If the input file was not in gzip format, read() copies the objects number + * of bytes into the buffer. + * returns the number of uncompressed bytes actually read + * (0 for end of file, -1 for error). + */ +template +inline int read(izstream& zs, T* x, Items items) { + return ::gzread(zs.fp(), x, items*sizeof(T)); +} + +/* + * Binary input with the '>' operator. + */ +template +inline izstream& operator>(izstream& zs, T& x) { + ::gzread(zs.fp(), &x, sizeof(T)); + return zs; +} + + +inline zstringlen::zstringlen(izstream& zs) { + zs > val.byte; + if (val.byte == 255) zs > val.word; + else val.word = val.byte; +} + +/* + * Read length of string + the string with the '>' operator. + */ +inline izstream& operator>(izstream& zs, char* x) { + zstringlen len(zs); + ::gzread(zs.fp(), x, len.value()); + x[len.value()] = '\0'; + return zs; +} + +inline char* read_string(izstream& zs) { + zstringlen len(zs); + char* x = new char[len.value()+1]; + ::gzread(zs.fp(), x, len.value()); + x[len.value()] = '\0'; + return x; +} + +// ----------------------------- ozstream ----------------------------- + +class ozstream +{ + public: + ozstream() : m_fp(0), m_os(0) { + } + ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION) + : m_fp(0), m_os(0) { + open(fp, level); + } + ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION) + : m_fp(0), m_os(0) { + open(name, level); + } + ~ozstream() { + close(); + } + + /* Opens a gzip (.gz) file for writing. + * The compression level parameter should be in 0..9 + * errno can be checked to distinguish two error cases + * (if errno is zero, the zlib error is Z_MEM_ERROR). + */ + void open(const char* name, int level = Z_DEFAULT_COMPRESSION) { + char mode[4] = "wb\0"; + if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level; + if (m_fp) close(); + m_fp = ::gzopen(name, mode); + } + + /* open from a FILE pointer. + */ + void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) { + SET_BINARY_MODE(fp); + char mode[4] = "wb\0"; + if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level; + if (m_fp) close(); + m_fp = ::gzdopen(fileno(fp), mode); + } + + /* Flushes all pending output if necessary, closes the compressed file + * and deallocates all the (de)compression state. The return value is + * the zlib error number (see function error() below). + */ + int close() { + if (m_os) { + ::gzwrite(m_fp, m_os->str(), m_os->pcount()); + delete[] m_os->str(); delete m_os; m_os = 0; + } + int r = ::gzclose(m_fp); m_fp = 0; return r; + } + + /* Binary write the given number of bytes into the compressed file. + */ + int write(const void* buf, size_t len) { + return ::gzwrite(m_fp, (voidp) buf, len); + } + + /* Flushes all pending output into the compressed file. The parameter + * _flush is as in the deflate() function. The return value is the zlib + * error number (see function gzerror below). flush() returns Z_OK if + * the flush_ parameter is Z_FINISH and all output could be flushed. + * flush() should be called only when strictly necessary because it can + * degrade compression. + */ + int flush(int _flush) { + os_flush(); + return ::gzflush(m_fp, _flush); + } + + /* Returns the error message for the last error which occurred on the + * given compressed file. errnum is set to zlib error number. If an + * error occurred in the file system and not in the compression library, + * errnum is set to Z_ERRNO and the application may consult errno + * to get the exact error code. + */ + const char* error(int* errnum) { + return ::gzerror(m_fp, errnum); + } + + gzFile fp() { return m_fp; } + + ostream& os() { + if (m_os == 0) m_os = new ostrstream; + return *m_os; + } + + void os_flush() { + if (m_os && m_os->pcount()>0) { + ostrstream* oss = new ostrstream; + oss->fill(m_os->fill()); + oss->flags(m_os->flags()); + oss->precision(m_os->precision()); + oss->width(m_os->width()); + ::gzwrite(m_fp, m_os->str(), m_os->pcount()); + delete[] m_os->str(); delete m_os; m_os = oss; + } + } + + private: + gzFile m_fp; + ostrstream* m_os; +}; + +/* + * Binary write the given (array of) object(s) into the compressed file. + * returns the number of uncompressed bytes actually written + * (0 in case of error). + */ +template +inline int write(ozstream& zs, const T* x, Items items) { + return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T)); +} + +/* + * Binary output with the '<' operator. + */ +template +inline ozstream& operator<(ozstream& zs, const T& x) { + ::gzwrite(zs.fp(), (voidp) &x, sizeof(T)); + return zs; +} + +inline zstringlen::zstringlen(ozstream& zs, const char* x) { + val.byte = 255; val.word = ::strlen(x); + if (val.word < 255) zs < (val.byte = val.word); + else zs < val; +} + +/* + * Write length of string + the string with the '<' operator. + */ +inline ozstream& operator<(ozstream& zs, const char* x) { + zstringlen len(zs, x); + ::gzwrite(zs.fp(), (voidp) x, len.value()); + return zs; +} + +#ifdef _MSC_VER +inline ozstream& operator<(ozstream& zs, char* const& x) { + return zs < (const char*) x; +} +#endif + +/* + * Ascii write with the << operator; + */ +template +inline ostream& operator<<(ozstream& zs, const T& x) { + zs.os_flush(); + return zs.os() << x; +} + +#endif diff --git a/src/SDL2/external/zlib-1.2.8/contrib/iostream2/zstream_test.cpp b/src/SDL2/external/zlib-1.2.8/contrib/iostream2/zstream_test.cpp new file mode 100644 index 000000000..6273f62d6 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/iostream2/zstream_test.cpp @@ -0,0 +1,25 @@ +#include "zstream.h" +#include +#include +#include + +void main() { + char h[256] = "Hello"; + char* g = "Goodbye"; + ozstream out("temp.gz"); + out < "This works well" < h < g; + out.close(); + + izstream in("temp.gz"); // read it back + char *x = read_string(in), *y = new char[256], z[256]; + in > y > z; + in.close(); + cout << x << endl << y << endl << z << endl; + + out.open("temp.gz"); // try ascii output; zcat temp.gz to see the results + out << setw(50) << setfill('#') << setprecision(20) << x << endl << y << endl << z << endl; + out << z << endl << y << endl << x << endl; + out << 1.1234567890123456789 << endl; + + delete[] x; delete[] y; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/iostream3/README b/src/SDL2/external/zlib-1.2.8/contrib/iostream3/README new file mode 100644 index 000000000..f7b319ab9 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/iostream3/README @@ -0,0 +1,35 @@ +These classes provide a C++ stream interface to the zlib library. It allows you +to do things like: + + gzofstream outf("blah.gz"); + outf << "These go into the gzip file " << 123 << endl; + +It does this by deriving a specialized stream buffer for gzipped files, which is +the way Stroustrup would have done it. :-> + +The gzifstream and gzofstream classes were originally written by Kevin Ruland +and made available in the zlib contrib/iostream directory. The older version still +compiles under gcc 2.xx, but not under gcc 3.xx, which sparked the development of +this version. + +The new classes are as standard-compliant as possible, closely following the +approach of the standard library's fstream classes. It compiles under gcc versions +3.2 and 3.3, but not under gcc 2.xx. This is mainly due to changes in the standard +library naming scheme. The new version of gzifstream/gzofstream/gzfilebuf differs +from the previous one in the following respects: +- added showmanyc +- added setbuf, with support for unbuffered output via setbuf(0,0) +- a few bug fixes of stream behavior +- gzipped output file opened with default compression level instead of maximum level +- setcompressionlevel()/strategy() members replaced by single setcompression() + +The code is provided "as is", with the permission to use, copy, modify, distribute +and sell it for any purpose without fee. + +Ludwig Schwardt + + +DSP Lab +Electrical & Electronic Engineering Department +University of Stellenbosch +South Africa diff --git a/src/SDL2/external/zlib-1.2.8/contrib/iostream3/TODO b/src/SDL2/external/zlib-1.2.8/contrib/iostream3/TODO new file mode 100644 index 000000000..7032f97be --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/iostream3/TODO @@ -0,0 +1,17 @@ +Possible upgrades to gzfilebuf: + +- The ability to do putback (e.g. putbackfail) + +- The ability to seek (zlib supports this, but could be slow/tricky) + +- Simultaneous read/write access (does it make sense?) + +- Support for ios_base::ate open mode + +- Locale support? + +- Check public interface to see which calls give problems + (due to dependence on library internals) + +- Override operator<<(ostream&, gzfilebuf*) to allow direct copying + of stream buffer to stream ( i.e. os << is.rdbuf(); ) diff --git a/src/SDL2/external/zlib-1.2.8/contrib/iostream3/test.cc b/src/SDL2/external/zlib-1.2.8/contrib/iostream3/test.cc new file mode 100644 index 000000000..94235334f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/iostream3/test.cc @@ -0,0 +1,50 @@ +/* + * Test program for gzifstream and gzofstream + * + * by Ludwig Schwardt + * original version by Kevin Ruland + */ + +#include "zfstream.h" +#include // for cout + +int main() { + + gzofstream outf; + gzifstream inf; + char buf[80]; + + outf.open("test1.txt.gz"); + outf << "The quick brown fox sidestepped the lazy canine\n" + << 1.3 << "\nPlan " << 9 << std::endl; + outf.close(); + std::cout << "Wrote the following message to 'test1.txt.gz' (check with zcat or zless):\n" + << "The quick brown fox sidestepped the lazy canine\n" + << 1.3 << "\nPlan " << 9 << std::endl; + + std::cout << "\nReading 'test1.txt.gz' (buffered) produces:\n"; + inf.open("test1.txt.gz"); + while (inf.getline(buf,80,'\n')) { + std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n"; + } + inf.close(); + + outf.rdbuf()->pubsetbuf(0,0); + outf.open("test2.txt.gz"); + outf << setcompression(Z_NO_COMPRESSION) + << "The quick brown fox sidestepped the lazy canine\n" + << 1.3 << "\nPlan " << 9 << std::endl; + outf.close(); + std::cout << "\nWrote the same message to 'test2.txt.gz' in uncompressed form"; + + std::cout << "\nReading 'test2.txt.gz' (unbuffered) produces:\n"; + inf.rdbuf()->pubsetbuf(0,0); + inf.open("test2.txt.gz"); + while (inf.getline(buf,80,'\n')) { + std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n"; + } + inf.close(); + + return 0; + +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/iostream3/zfstream.cc b/src/SDL2/external/zlib-1.2.8/contrib/iostream3/zfstream.cc new file mode 100644 index 000000000..94eb93344 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/iostream3/zfstream.cc @@ -0,0 +1,479 @@ +/* + * A C++ I/O streams interface to the zlib gz* functions + * + * by Ludwig Schwardt + * original version by Kevin Ruland + * + * This version is standard-compliant and compatible with gcc 3.x. + */ + +#include "zfstream.h" +#include // for strcpy, strcat, strlen (mode strings) +#include // for BUFSIZ + +// Internal buffer sizes (default and "unbuffered" versions) +#define BIGBUFSIZE BUFSIZ +#define SMALLBUFSIZE 1 + +/*****************************************************************************/ + +// Default constructor +gzfilebuf::gzfilebuf() +: file(NULL), io_mode(std::ios_base::openmode(0)), own_fd(false), + buffer(NULL), buffer_size(BIGBUFSIZE), own_buffer(true) +{ + // No buffers to start with + this->disable_buffer(); +} + +// Destructor +gzfilebuf::~gzfilebuf() +{ + // Sync output buffer and close only if responsible for file + // (i.e. attached streams should be left open at this stage) + this->sync(); + if (own_fd) + this->close(); + // Make sure internal buffer is deallocated + this->disable_buffer(); +} + +// Set compression level and strategy +int +gzfilebuf::setcompression(int comp_level, + int comp_strategy) +{ + return gzsetparams(file, comp_level, comp_strategy); +} + +// Open gzipped file +gzfilebuf* +gzfilebuf::open(const char *name, + std::ios_base::openmode mode) +{ + // Fail if file already open + if (this->is_open()) + return NULL; + // Don't support simultaneous read/write access (yet) + if ((mode & std::ios_base::in) && (mode & std::ios_base::out)) + return NULL; + + // Build mode string for gzopen and check it [27.8.1.3.2] + char char_mode[6] = "\0\0\0\0\0"; + if (!this->open_mode(mode, char_mode)) + return NULL; + + // Attempt to open file + if ((file = gzopen(name, char_mode)) == NULL) + return NULL; + + // On success, allocate internal buffer and set flags + this->enable_buffer(); + io_mode = mode; + own_fd = true; + return this; +} + +// Attach to gzipped file +gzfilebuf* +gzfilebuf::attach(int fd, + std::ios_base::openmode mode) +{ + // Fail if file already open + if (this->is_open()) + return NULL; + // Don't support simultaneous read/write access (yet) + if ((mode & std::ios_base::in) && (mode & std::ios_base::out)) + return NULL; + + // Build mode string for gzdopen and check it [27.8.1.3.2] + char char_mode[6] = "\0\0\0\0\0"; + if (!this->open_mode(mode, char_mode)) + return NULL; + + // Attempt to attach to file + if ((file = gzdopen(fd, char_mode)) == NULL) + return NULL; + + // On success, allocate internal buffer and set flags + this->enable_buffer(); + io_mode = mode; + own_fd = false; + return this; +} + +// Close gzipped file +gzfilebuf* +gzfilebuf::close() +{ + // Fail immediately if no file is open + if (!this->is_open()) + return NULL; + // Assume success + gzfilebuf* retval = this; + // Attempt to sync and close gzipped file + if (this->sync() == -1) + retval = NULL; + if (gzclose(file) < 0) + retval = NULL; + // File is now gone anyway (postcondition [27.8.1.3.8]) + file = NULL; + own_fd = false; + // Destroy internal buffer if it exists + this->disable_buffer(); + return retval; +} + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +// Convert int open mode to mode string +bool +gzfilebuf::open_mode(std::ios_base::openmode mode, + char* c_mode) const +{ + bool testb = mode & std::ios_base::binary; + bool testi = mode & std::ios_base::in; + bool testo = mode & std::ios_base::out; + bool testt = mode & std::ios_base::trunc; + bool testa = mode & std::ios_base::app; + + // Check for valid flag combinations - see [27.8.1.3.2] (Table 92) + // Original zfstream hardcoded the compression level to maximum here... + // Double the time for less than 1% size improvement seems + // excessive though - keeping it at the default level + // To change back, just append "9" to the next three mode strings + if (!testi && testo && !testt && !testa) + strcpy(c_mode, "w"); + if (!testi && testo && !testt && testa) + strcpy(c_mode, "a"); + if (!testi && testo && testt && !testa) + strcpy(c_mode, "w"); + if (testi && !testo && !testt && !testa) + strcpy(c_mode, "r"); + // No read/write mode yet +// if (testi && testo && !testt && !testa) +// strcpy(c_mode, "r+"); +// if (testi && testo && testt && !testa) +// strcpy(c_mode, "w+"); + + // Mode string should be empty for invalid combination of flags + if (strlen(c_mode) == 0) + return false; + if (testb) + strcat(c_mode, "b"); + return true; +} + +// Determine number of characters in internal get buffer +std::streamsize +gzfilebuf::showmanyc() +{ + // Calls to underflow will fail if file not opened for reading + if (!this->is_open() || !(io_mode & std::ios_base::in)) + return -1; + // Make sure get area is in use + if (this->gptr() && (this->gptr() < this->egptr())) + return std::streamsize(this->egptr() - this->gptr()); + else + return 0; +} + +// Fill get area from gzipped file +gzfilebuf::int_type +gzfilebuf::underflow() +{ + // If something is left in the get area by chance, return it + // (this shouldn't normally happen, as underflow is only supposed + // to be called when gptr >= egptr, but it serves as error check) + if (this->gptr() && (this->gptr() < this->egptr())) + return traits_type::to_int_type(*(this->gptr())); + + // If the file hasn't been opened for reading, produce error + if (!this->is_open() || !(io_mode & std::ios_base::in)) + return traits_type::eof(); + + // Attempt to fill internal buffer from gzipped file + // (buffer must be guaranteed to exist...) + int bytes_read = gzread(file, buffer, buffer_size); + // Indicates error or EOF + if (bytes_read <= 0) + { + // Reset get area + this->setg(buffer, buffer, buffer); + return traits_type::eof(); + } + // Make all bytes read from file available as get area + this->setg(buffer, buffer, buffer + bytes_read); + + // Return next character in get area + return traits_type::to_int_type(*(this->gptr())); +} + +// Write put area to gzipped file +gzfilebuf::int_type +gzfilebuf::overflow(int_type c) +{ + // Determine whether put area is in use + if (this->pbase()) + { + // Double-check pointer range + if (this->pptr() > this->epptr() || this->pptr() < this->pbase()) + return traits_type::eof(); + // Add extra character to buffer if not EOF + if (!traits_type::eq_int_type(c, traits_type::eof())) + { + *(this->pptr()) = traits_type::to_char_type(c); + this->pbump(1); + } + // Number of characters to write to file + int bytes_to_write = this->pptr() - this->pbase(); + // Overflow doesn't fail if nothing is to be written + if (bytes_to_write > 0) + { + // If the file hasn't been opened for writing, produce error + if (!this->is_open() || !(io_mode & std::ios_base::out)) + return traits_type::eof(); + // If gzipped file won't accept all bytes written to it, fail + if (gzwrite(file, this->pbase(), bytes_to_write) != bytes_to_write) + return traits_type::eof(); + // Reset next pointer to point to pbase on success + this->pbump(-bytes_to_write); + } + } + // Write extra character to file if not EOF + else if (!traits_type::eq_int_type(c, traits_type::eof())) + { + // If the file hasn't been opened for writing, produce error + if (!this->is_open() || !(io_mode & std::ios_base::out)) + return traits_type::eof(); + // Impromptu char buffer (allows "unbuffered" output) + char_type last_char = traits_type::to_char_type(c); + // If gzipped file won't accept this character, fail + if (gzwrite(file, &last_char, 1) != 1) + return traits_type::eof(); + } + + // If you got here, you have succeeded (even if c was EOF) + // The return value should therefore be non-EOF + if (traits_type::eq_int_type(c, traits_type::eof())) + return traits_type::not_eof(c); + else + return c; +} + +// Assign new buffer +std::streambuf* +gzfilebuf::setbuf(char_type* p, + std::streamsize n) +{ + // First make sure stuff is sync'ed, for safety + if (this->sync() == -1) + return NULL; + // If buffering is turned off on purpose via setbuf(0,0), still allocate one... + // "Unbuffered" only really refers to put [27.8.1.4.10], while get needs at + // least a buffer of size 1 (very inefficient though, therefore make it bigger?) + // This follows from [27.5.2.4.3]/12 (gptr needs to point at something, it seems) + if (!p || !n) + { + // Replace existing buffer (if any) with small internal buffer + this->disable_buffer(); + buffer = NULL; + buffer_size = 0; + own_buffer = true; + this->enable_buffer(); + } + else + { + // Replace existing buffer (if any) with external buffer + this->disable_buffer(); + buffer = p; + buffer_size = n; + own_buffer = false; + this->enable_buffer(); + } + return this; +} + +// Write put area to gzipped file (i.e. ensures that put area is empty) +int +gzfilebuf::sync() +{ + return traits_type::eq_int_type(this->overflow(), traits_type::eof()) ? -1 : 0; +} + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +// Allocate internal buffer +void +gzfilebuf::enable_buffer() +{ + // If internal buffer required, allocate one + if (own_buffer && !buffer) + { + // Check for buffered vs. "unbuffered" + if (buffer_size > 0) + { + // Allocate internal buffer + buffer = new char_type[buffer_size]; + // Get area starts empty and will be expanded by underflow as need arises + this->setg(buffer, buffer, buffer); + // Setup entire internal buffer as put area. + // The one-past-end pointer actually points to the last element of the buffer, + // so that overflow(c) can safely add the extra character c to the sequence. + // These pointers remain in place for the duration of the buffer + this->setp(buffer, buffer + buffer_size - 1); + } + else + { + // Even in "unbuffered" case, (small?) get buffer is still required + buffer_size = SMALLBUFSIZE; + buffer = new char_type[buffer_size]; + this->setg(buffer, buffer, buffer); + // "Unbuffered" means no put buffer + this->setp(0, 0); + } + } + else + { + // If buffer already allocated, reset buffer pointers just to make sure no + // stale chars are lying around + this->setg(buffer, buffer, buffer); + this->setp(buffer, buffer + buffer_size - 1); + } +} + +// Destroy internal buffer +void +gzfilebuf::disable_buffer() +{ + // If internal buffer exists, deallocate it + if (own_buffer && buffer) + { + // Preserve unbuffered status by zeroing size + if (!this->pbase()) + buffer_size = 0; + delete[] buffer; + buffer = NULL; + this->setg(0, 0, 0); + this->setp(0, 0); + } + else + { + // Reset buffer pointers to initial state if external buffer exists + this->setg(buffer, buffer, buffer); + if (buffer) + this->setp(buffer, buffer + buffer_size - 1); + else + this->setp(0, 0); + } +} + +/*****************************************************************************/ + +// Default constructor initializes stream buffer +gzifstream::gzifstream() +: std::istream(NULL), sb() +{ this->init(&sb); } + +// Initialize stream buffer and open file +gzifstream::gzifstream(const char* name, + std::ios_base::openmode mode) +: std::istream(NULL), sb() +{ + this->init(&sb); + this->open(name, mode); +} + +// Initialize stream buffer and attach to file +gzifstream::gzifstream(int fd, + std::ios_base::openmode mode) +: std::istream(NULL), sb() +{ + this->init(&sb); + this->attach(fd, mode); +} + +// Open file and go into fail() state if unsuccessful +void +gzifstream::open(const char* name, + std::ios_base::openmode mode) +{ + if (!sb.open(name, mode | std::ios_base::in)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Attach to file and go into fail() state if unsuccessful +void +gzifstream::attach(int fd, + std::ios_base::openmode mode) +{ + if (!sb.attach(fd, mode | std::ios_base::in)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Close file +void +gzifstream::close() +{ + if (!sb.close()) + this->setstate(std::ios_base::failbit); +} + +/*****************************************************************************/ + +// Default constructor initializes stream buffer +gzofstream::gzofstream() +: std::ostream(NULL), sb() +{ this->init(&sb); } + +// Initialize stream buffer and open file +gzofstream::gzofstream(const char* name, + std::ios_base::openmode mode) +: std::ostream(NULL), sb() +{ + this->init(&sb); + this->open(name, mode); +} + +// Initialize stream buffer and attach to file +gzofstream::gzofstream(int fd, + std::ios_base::openmode mode) +: std::ostream(NULL), sb() +{ + this->init(&sb); + this->attach(fd, mode); +} + +// Open file and go into fail() state if unsuccessful +void +gzofstream::open(const char* name, + std::ios_base::openmode mode) +{ + if (!sb.open(name, mode | std::ios_base::out)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Attach to file and go into fail() state if unsuccessful +void +gzofstream::attach(int fd, + std::ios_base::openmode mode) +{ + if (!sb.attach(fd, mode | std::ios_base::out)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Close file +void +gzofstream::close() +{ + if (!sb.close()) + this->setstate(std::ios_base::failbit); +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/iostream3/zfstream.h b/src/SDL2/external/zlib-1.2.8/contrib/iostream3/zfstream.h new file mode 100644 index 000000000..8574479ae --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/iostream3/zfstream.h @@ -0,0 +1,466 @@ +/* + * A C++ I/O streams interface to the zlib gz* functions + * + * by Ludwig Schwardt + * original version by Kevin Ruland + * + * This version is standard-compliant and compatible with gcc 3.x. + */ + +#ifndef ZFSTREAM_H +#define ZFSTREAM_H + +#include // not iostream, since we don't need cin/cout +#include +#include "zlib.h" + +/*****************************************************************************/ + +/** + * @brief Gzipped file stream buffer class. + * + * This class implements basic_filebuf for gzipped files. It doesn't yet support + * seeking (allowed by zlib but slow/limited), putback and read/write access + * (tricky). Otherwise, it attempts to be a drop-in replacement for the standard + * file streambuf. +*/ +class gzfilebuf : public std::streambuf +{ +public: + // Default constructor. + gzfilebuf(); + + // Destructor. + virtual + ~gzfilebuf(); + + /** + * @brief Set compression level and strategy on the fly. + * @param comp_level Compression level (see zlib.h for allowed values) + * @param comp_strategy Compression strategy (see zlib.h for allowed values) + * @return Z_OK on success, Z_STREAM_ERROR otherwise. + * + * Unfortunately, these parameters cannot be modified separately, as the + * previous zfstream version assumed. Since the strategy is seldom changed, + * it can default and setcompression(level) then becomes like the old + * setcompressionlevel(level). + */ + int + setcompression(int comp_level, + int comp_strategy = Z_DEFAULT_STRATEGY); + + /** + * @brief Check if file is open. + * @return True if file is open. + */ + bool + is_open() const { return (file != NULL); } + + /** + * @brief Open gzipped file. + * @param name File name. + * @param mode Open mode flags. + * @return @c this on success, NULL on failure. + */ + gzfilebuf* + open(const char* name, + std::ios_base::openmode mode); + + /** + * @brief Attach to already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags. + * @return @c this on success, NULL on failure. + */ + gzfilebuf* + attach(int fd, + std::ios_base::openmode mode); + + /** + * @brief Close gzipped file. + * @return @c this on success, NULL on failure. + */ + gzfilebuf* + close(); + +protected: + /** + * @brief Convert ios open mode int to mode string used by zlib. + * @return True if valid mode flag combination. + */ + bool + open_mode(std::ios_base::openmode mode, + char* c_mode) const; + + /** + * @brief Number of characters available in stream buffer. + * @return Number of characters. + * + * This indicates number of characters in get area of stream buffer. + * These characters can be read without accessing the gzipped file. + */ + virtual std::streamsize + showmanyc(); + + /** + * @brief Fill get area from gzipped file. + * @return First character in get area on success, EOF on error. + * + * This actually reads characters from gzipped file to stream + * buffer. Always buffered. + */ + virtual int_type + underflow(); + + /** + * @brief Write put area to gzipped file. + * @param c Extra character to add to buffer contents. + * @return Non-EOF on success, EOF on error. + * + * This actually writes characters in stream buffer to + * gzipped file. With unbuffered output this is done one + * character at a time. + */ + virtual int_type + overflow(int_type c = traits_type::eof()); + + /** + * @brief Installs external stream buffer. + * @param p Pointer to char buffer. + * @param n Size of external buffer. + * @return @c this on success, NULL on failure. + * + * Call setbuf(0,0) to enable unbuffered output. + */ + virtual std::streambuf* + setbuf(char_type* p, + std::streamsize n); + + /** + * @brief Flush stream buffer to file. + * @return 0 on success, -1 on error. + * + * This calls underflow(EOF) to do the job. + */ + virtual int + sync(); + +// +// Some future enhancements +// +// virtual int_type uflow(); +// virtual int_type pbackfail(int_type c = traits_type::eof()); +// virtual pos_type +// seekoff(off_type off, +// std::ios_base::seekdir way, +// std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out); +// virtual pos_type +// seekpos(pos_type sp, +// std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out); + +private: + /** + * @brief Allocate internal buffer. + * + * This function is safe to call multiple times. It will ensure + * that a proper internal buffer exists if it is required. If the + * buffer already exists or is external, the buffer pointers will be + * reset to their original state. + */ + void + enable_buffer(); + + /** + * @brief Destroy internal buffer. + * + * This function is safe to call multiple times. It will ensure + * that the internal buffer is deallocated if it exists. In any + * case, it will also reset the buffer pointers. + */ + void + disable_buffer(); + + /** + * Underlying file pointer. + */ + gzFile file; + + /** + * Mode in which file was opened. + */ + std::ios_base::openmode io_mode; + + /** + * @brief True if this object owns file descriptor. + * + * This makes the class responsible for closing the file + * upon destruction. + */ + bool own_fd; + + /** + * @brief Stream buffer. + * + * For simplicity this remains allocated on the free store for the + * entire life span of the gzfilebuf object, unless replaced by setbuf. + */ + char_type* buffer; + + /** + * @brief Stream buffer size. + * + * Defaults to system default buffer size (typically 8192 bytes). + * Modified by setbuf. + */ + std::streamsize buffer_size; + + /** + * @brief True if this object owns stream buffer. + * + * This makes the class responsible for deleting the buffer + * upon destruction. + */ + bool own_buffer; +}; + +/*****************************************************************************/ + +/** + * @brief Gzipped file input stream class. + * + * This class implements ifstream for gzipped files. Seeking and putback + * is not supported yet. +*/ +class gzifstream : public std::istream +{ +public: + // Default constructor + gzifstream(); + + /** + * @brief Construct stream on gzipped file to be opened. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::in). + */ + explicit + gzifstream(const char* name, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * @brief Construct stream on already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::in). + */ + explicit + gzifstream(int fd, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * Obtain underlying stream buffer. + */ + gzfilebuf* + rdbuf() const + { return const_cast(&sb); } + + /** + * @brief Check if file is open. + * @return True if file is open. + */ + bool + is_open() { return sb.is_open(); } + + /** + * @brief Open gzipped file. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::in). + * + * Stream will be in state good() if file opens successfully; + * otherwise in state fail(). This differs from the behavior of + * ifstream, which never sets the state to good() and therefore + * won't allow you to reuse the stream for a second file unless + * you manually clear() the state. The choice is a matter of + * convenience. + */ + void + open(const char* name, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * @brief Attach to already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::in). + * + * Stream will be in state good() if attach succeeded; otherwise + * in state fail(). + */ + void + attach(int fd, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * @brief Close gzipped file. + * + * Stream will be in state fail() if close failed. + */ + void + close(); + +private: + /** + * Underlying stream buffer. + */ + gzfilebuf sb; +}; + +/*****************************************************************************/ + +/** + * @brief Gzipped file output stream class. + * + * This class implements ofstream for gzipped files. Seeking and putback + * is not supported yet. +*/ +class gzofstream : public std::ostream +{ +public: + // Default constructor + gzofstream(); + + /** + * @brief Construct stream on gzipped file to be opened. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::out). + */ + explicit + gzofstream(const char* name, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * @brief Construct stream on already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::out). + */ + explicit + gzofstream(int fd, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * Obtain underlying stream buffer. + */ + gzfilebuf* + rdbuf() const + { return const_cast(&sb); } + + /** + * @brief Check if file is open. + * @return True if file is open. + */ + bool + is_open() { return sb.is_open(); } + + /** + * @brief Open gzipped file. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::out). + * + * Stream will be in state good() if file opens successfully; + * otherwise in state fail(). This differs from the behavior of + * ofstream, which never sets the state to good() and therefore + * won't allow you to reuse the stream for a second file unless + * you manually clear() the state. The choice is a matter of + * convenience. + */ + void + open(const char* name, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * @brief Attach to already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::out). + * + * Stream will be in state good() if attach succeeded; otherwise + * in state fail(). + */ + void + attach(int fd, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * @brief Close gzipped file. + * + * Stream will be in state fail() if close failed. + */ + void + close(); + +private: + /** + * Underlying stream buffer. + */ + gzfilebuf sb; +}; + +/*****************************************************************************/ + +/** + * @brief Gzipped file output stream manipulator class. + * + * This class defines a two-argument manipulator for gzofstream. It is used + * as base for the setcompression(int,int) manipulator. +*/ +template + class gzomanip2 + { + public: + // Allows insertor to peek at internals + template + friend gzofstream& + operator<<(gzofstream&, + const gzomanip2&); + + // Constructor + gzomanip2(gzofstream& (*f)(gzofstream&, T1, T2), + T1 v1, + T2 v2); + private: + // Underlying manipulator function + gzofstream& + (*func)(gzofstream&, T1, T2); + + // Arguments for manipulator function + T1 val1; + T2 val2; + }; + +/*****************************************************************************/ + +// Manipulator function thunks through to stream buffer +inline gzofstream& +setcompression(gzofstream &gzs, int l, int s = Z_DEFAULT_STRATEGY) +{ + (gzs.rdbuf())->setcompression(l, s); + return gzs; +} + +// Manipulator constructor stores arguments +template + inline + gzomanip2::gzomanip2(gzofstream &(*f)(gzofstream &, T1, T2), + T1 v1, + T2 v2) + : func(f), val1(v1), val2(v2) + { } + +// Insertor applies underlying manipulator function to stream +template + inline gzofstream& + operator<<(gzofstream& s, const gzomanip2& m) + { return (*m.func)(s, m.val1, m.val2); } + +// Insert this onto stream to simplify setting of compression level +inline gzomanip2 +setcompression(int l, int s = Z_DEFAULT_STRATEGY) +{ return gzomanip2(&setcompression, l, s); } + +#endif // ZFSTREAM_H diff --git a/src/SDL2/external/zlib-1.2.8/contrib/masmx64/bld_ml64.bat b/src/SDL2/external/zlib-1.2.8/contrib/masmx64/bld_ml64.bat new file mode 100644 index 000000000..8f9343d0a --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/masmx64/bld_ml64.bat @@ -0,0 +1,2 @@ +ml64.exe /Flinffasx64 /c /Zi inffasx64.asm +ml64.exe /Flgvmat64 /c /Zi gvmat64.asm diff --git a/src/SDL2/external/zlib-1.2.8/contrib/masmx64/gvmat64.asm b/src/SDL2/external/zlib-1.2.8/contrib/masmx64/gvmat64.asm new file mode 100644 index 000000000..9879c28b9 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/masmx64/gvmat64.asm @@ -0,0 +1,553 @@ +;uInt longest_match_x64( +; deflate_state *s, +; IPos cur_match); /* current match */ + +; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86_64 +; (AMD64 on Athlon 64, Opteron, Phenom +; and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7) +; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant. +; +; File written by Gilles Vollant, by converting to assembly the longest_match +; from Jean-loup Gailly in deflate.c of zLib and infoZip zip. +; +; and by taking inspiration on asm686 with masm, optimised assembly code +; from Brian Raiter, written 1998 +; +; This software is provided 'as-is', without any express or implied +; warranty. In no event will the authors be held liable for any damages +; arising from the use of this software. +; +; Permission is granted to anyone to use this software for any purpose, +; including commercial applications, and to alter it and redistribute it +; freely, subject to the following restrictions: +; +; 1. The origin of this software must not be misrepresented; you must not +; claim that you wrote the original software. If you use this software +; in a product, an acknowledgment in the product documentation would be +; appreciated but is not required. +; 2. Altered source versions must be plainly marked as such, and must not be +; misrepresented as being the original software +; 3. This notice may not be removed or altered from any source distribution. +; +; +; +; http://www.zlib.net +; http://www.winimage.com/zLibDll +; http://www.muppetlabs.com/~breadbox/software/assembly.html +; +; to compile this file for infozip Zip, I use option: +; ml64.exe /Flgvmat64 /c /Zi /DINFOZIP gvmat64.asm +; +; to compile this file for zLib, I use option: +; ml64.exe /Flgvmat64 /c /Zi gvmat64.asm +; Be carrefull to adapt zlib1222add below to your version of zLib +; (if you use a version of zLib before 1.0.4 or after 1.2.2.2, change +; value of zlib1222add later) +; +; This file compile with Microsoft Macro Assembler (x64) for AMD64 +; +; ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK +; +; (you can get Windows WDK with ml64 for AMD64 from +; http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price) +; + + +;uInt longest_match(s, cur_match) +; deflate_state *s; +; IPos cur_match; /* current match */ +.code +longest_match PROC + + +;LocalVarsSize equ 88 + LocalVarsSize equ 72 + +; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12 +; free register : r14,r15 +; register can be saved : rsp + + chainlenwmask equ rsp + 8 - LocalVarsSize ; high word: current chain len + ; low word: s->wmask +;window equ rsp + xx - LocalVarsSize ; local copy of s->window ; stored in r10 +;windowbestlen equ rsp + xx - LocalVarsSize ; s->window + bestlen , use r10+r11 +;scanstart equ rsp + xx - LocalVarsSize ; first two bytes of string ; stored in r12w +;scanend equ rsp + xx - LocalVarsSize ; last two bytes of string use ebx +;scanalign equ rsp + xx - LocalVarsSize ; dword-misalignment of string r13 +;bestlen equ rsp + xx - LocalVarsSize ; size of best match so far -> r11d +;scan equ rsp + xx - LocalVarsSize ; ptr to string wanting match -> r9 +IFDEF INFOZIP +ELSE + nicematch equ (rsp + 16 - LocalVarsSize) ; a good enough match size +ENDIF + +save_rdi equ rsp + 24 - LocalVarsSize +save_rsi equ rsp + 32 - LocalVarsSize +save_rbx equ rsp + 40 - LocalVarsSize +save_rbp equ rsp + 48 - LocalVarsSize +save_r12 equ rsp + 56 - LocalVarsSize +save_r13 equ rsp + 64 - LocalVarsSize +;save_r14 equ rsp + 72 - LocalVarsSize +;save_r15 equ rsp + 80 - LocalVarsSize + + +; summary of register usage +; scanend ebx +; scanendw bx +; chainlenwmask edx +; curmatch rsi +; curmatchd esi +; windowbestlen r8 +; scanalign r9 +; scanalignd r9d +; window r10 +; bestlen r11 +; bestlend r11d +; scanstart r12d +; scanstartw r12w +; scan r13 +; nicematch r14d +; limit r15 +; limitd r15d +; prev rcx + +; all the +4 offsets are due to the addition of pending_buf_size (in zlib +; in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, remove the +4). +; Note : these value are good with a 8 bytes boundary pack structure + + + MAX_MATCH equ 258 + MIN_MATCH equ 3 + MIN_LOOKAHEAD equ (MAX_MATCH+MIN_MATCH+1) + + +;;; Offsets for fields in the deflate_state structure. These numbers +;;; are calculated from the definition of deflate_state, with the +;;; assumption that the compiler will dword-align the fields. (Thus, +;;; changing the definition of deflate_state could easily cause this +;;; program to crash horribly, without so much as a warning at +;;; compile time. Sigh.) + +; all the +zlib1222add offsets are due to the addition of fields +; in zlib in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). +; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). +; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). + + +IFDEF INFOZIP + +_DATA SEGMENT +COMM window_size:DWORD +; WMask ; 7fff +COMM window:BYTE:010040H +COMM prev:WORD:08000H +; MatchLen : unused +; PrevMatch : unused +COMM strstart:DWORD +COMM match_start:DWORD +; Lookahead : ignore +COMM prev_length:DWORD ; PrevLen +COMM max_chain_length:DWORD +COMM good_match:DWORD +COMM nice_match:DWORD +prev_ad equ OFFSET prev +window_ad equ OFFSET window +nicematch equ nice_match +_DATA ENDS +WMask equ 07fffh + +ELSE + + IFNDEF zlib1222add + zlib1222add equ 8 + ENDIF +dsWSize equ 56+zlib1222add+(zlib1222add/2) +dsWMask equ 64+zlib1222add+(zlib1222add/2) +dsWindow equ 72+zlib1222add +dsPrev equ 88+zlib1222add +dsMatchLen equ 128+zlib1222add +dsPrevMatch equ 132+zlib1222add +dsStrStart equ 140+zlib1222add +dsMatchStart equ 144+zlib1222add +dsLookahead equ 148+zlib1222add +dsPrevLen equ 152+zlib1222add +dsMaxChainLen equ 156+zlib1222add +dsGoodMatch equ 172+zlib1222add +dsNiceMatch equ 176+zlib1222add + +window_size equ [ rcx + dsWSize] +WMask equ [ rcx + dsWMask] +window_ad equ [ rcx + dsWindow] +prev_ad equ [ rcx + dsPrev] +strstart equ [ rcx + dsStrStart] +match_start equ [ rcx + dsMatchStart] +Lookahead equ [ rcx + dsLookahead] ; 0ffffffffh on infozip +prev_length equ [ rcx + dsPrevLen] +max_chain_length equ [ rcx + dsMaxChainLen] +good_match equ [ rcx + dsGoodMatch] +nice_match equ [ rcx + dsNiceMatch] +ENDIF + +; parameter 1 in r8(deflate state s), param 2 in rdx (cur match) + +; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and +; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp +; +; All registers must be preserved across the call, except for +; rax, rcx, rdx, r8, r9, r10, and r11, which are scratch. + + + +;;; Save registers that the compiler may be using, and adjust esp to +;;; make room for our stack frame. + + +;;; Retrieve the function arguments. r8d will hold cur_match +;;; throughout the entire function. edx will hold the pointer to the +;;; deflate_state structure during the function's setup (before +;;; entering the main loop. + +; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match) + +; this clear high 32 bits of r8, which can be garbage in both r8 and rdx + + mov [save_rdi],rdi + mov [save_rsi],rsi + mov [save_rbx],rbx + mov [save_rbp],rbp +IFDEF INFOZIP + mov r8d,ecx +ELSE + mov r8d,edx +ENDIF + mov [save_r12],r12 + mov [save_r13],r13 +; mov [save_r14],r14 +; mov [save_r15],r15 + + +;;; uInt wmask = s->w_mask; +;;; unsigned chain_length = s->max_chain_length; +;;; if (s->prev_length >= s->good_match) { +;;; chain_length >>= 2; +;;; } + + mov edi, prev_length + mov esi, good_match + mov eax, WMask + mov ebx, max_chain_length + cmp edi, esi + jl LastMatchGood + shr ebx, 2 +LastMatchGood: + +;;; chainlen is decremented once beforehand so that the function can +;;; use the sign flag instead of the zero flag for the exit test. +;;; It is then shifted into the high word, to make room for the wmask +;;; value, which it will always accompany. + + dec ebx + shl ebx, 16 + or ebx, eax + +;;; on zlib only +;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + +IFDEF INFOZIP + mov [chainlenwmask], ebx +; on infozip nice_match = [nice_match] +ELSE + mov eax, nice_match + mov [chainlenwmask], ebx + mov r10d, Lookahead + cmp r10d, eax + cmovnl r10d, eax + mov [nicematch],r10d +ENDIF + +;;; register Bytef *scan = s->window + s->strstart; + mov r10, window_ad + mov ebp, strstart + lea r13, [r10 + rbp] + +;;; Determine how many bytes the scan ptr is off from being +;;; dword-aligned. + + mov r9,r13 + neg r13 + and r13,3 + +;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ? +;;; s->strstart - (IPos)MAX_DIST(s) : NIL; +IFDEF INFOZIP + mov eax,07efah ; MAX_DIST = (WSIZE-MIN_LOOKAHEAD) (0x8000-(3+8+1)) +ELSE + mov eax, window_size + sub eax, MIN_LOOKAHEAD +ENDIF + xor edi,edi + sub ebp, eax + + mov r11d, prev_length + + cmovng ebp,edi + +;;; int best_len = s->prev_length; + + +;;; Store the sum of s->window + best_len in esi locally, and in esi. + + lea rsi,[r10+r11] + +;;; register ush scan_start = *(ushf*)scan; +;;; register ush scan_end = *(ushf*)(scan+best_len-1); +;;; Posf *prev = s->prev; + + movzx r12d,word ptr [r9] + movzx ebx, word ptr [r9 + r11 - 1] + + mov rdi, prev_ad + +;;; Jump into the main loop. + + mov edx, [chainlenwmask] + + cmp bx,word ptr [rsi + r8 - 1] + jz LookupLoopIsZero + +LookupLoop1: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry1: + cmp bx,word ptr [rsi + r8 - 1] + jz LookupLoopIsZero + +LookupLoop2: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry2: + cmp bx,word ptr [rsi + r8 - 1] + jz LookupLoopIsZero + +LookupLoop4: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry4: + + cmp bx,word ptr [rsi + r8 - 1] + jnz LookupLoop1 + jmp LookupLoopIsZero + + +;;; do { +;;; match = s->window + cur_match; +;;; if (*(ushf*)(match+best_len-1) != scan_end || +;;; *(ushf*)match != scan_start) continue; +;;; [...] +;;; } while ((cur_match = prev[cur_match & wmask]) > limit +;;; && --chain_length != 0); +;;; +;;; Here is the inner loop of the function. The function will spend the +;;; majority of its time in this loop, and majority of that time will +;;; be spent in the first ten instructions. +;;; +;;; Within this loop: +;;; ebx = scanend +;;; r8d = curmatch +;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) +;;; esi = windowbestlen - i.e., (window + bestlen) +;;; edi = prev +;;; ebp = limit + +LookupLoop: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry: + + cmp bx,word ptr [rsi + r8 - 1] + jnz LookupLoop1 +LookupLoopIsZero: + cmp r12w, word ptr [r10 + r8] + jnz LookupLoop1 + + +;;; Store the current value of chainlen. + mov [chainlenwmask], edx + +;;; Point edi to the string under scrutiny, and esi to the string we +;;; are hoping to match it up with. In actuality, esi and edi are +;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is +;;; initialized to -(MAX_MATCH_8 - scanalign). + + lea rsi,[r8+r10] + mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8) + lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8] + lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8] + + prefetcht1 [rsi+rdx] + prefetcht1 [rdi+rdx] + + +;;; Test the strings for equality, 8 bytes at a time. At the end, +;;; adjust rdx so that it is offset to the exact byte that mismatched. +;;; +;;; We already know at this point that the first three bytes of the +;;; strings match each other, and they can be safely passed over before +;;; starting the compare loop. So what this code does is skip over 0-3 +;;; bytes, as much as necessary in order to dword-align the edi +;;; pointer. (rsi will still be misaligned three times out of four.) +;;; +;;; It should be confessed that this loop usually does not represent +;;; much of the total running time. Replacing it with a more +;;; straightforward "rep cmpsb" would not drastically degrade +;;; performance. + + +LoopCmps: + mov rax, [rsi + rdx] + xor rax, [rdi + rdx] + jnz LeaveLoopCmps + + mov rax, [rsi + rdx + 8] + xor rax, [rdi + rdx + 8] + jnz LeaveLoopCmps8 + + + mov rax, [rsi + rdx + 8+8] + xor rax, [rdi + rdx + 8+8] + jnz LeaveLoopCmps16 + + add rdx,8+8+8 + + jnz short LoopCmps + jmp short LenMaximum +LeaveLoopCmps16: add rdx,8 +LeaveLoopCmps8: add rdx,8 +LeaveLoopCmps: + + test eax, 0000FFFFh + jnz LenLower + + test eax,0ffffffffh + + jnz LenLower32 + + add rdx,4 + shr rax,32 + or ax,ax + jnz LenLower + +LenLower32: + shr eax,16 + add rdx,2 +LenLower: sub al, 1 + adc rdx, 0 +;;; Calculate the length of the match. If it is longer than MAX_MATCH, +;;; then automatically accept it as the best possible match and leave. + + lea rax, [rdi + rdx] + sub rax, r9 + cmp eax, MAX_MATCH + jge LenMaximum + +;;; If the length of the match is not longer than the best match we +;;; have so far, then forget it and return to the lookup loop. +;/////////////////////////////////// + + cmp eax, r11d + jg LongerMatch + + lea rsi,[r10+r11] + + mov rdi, prev_ad + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; s->match_start = cur_match; +;;; best_len = len; +;;; if (len >= nice_match) break; +;;; scan_end = *(ushf*)(scan+best_len-1); + +LongerMatch: + mov r11d, eax + mov match_start, r8d + cmp eax, [nicematch] + jge LeaveNow + + lea rsi,[r10+rax] + + movzx ebx, word ptr [r9 + rax - 1] + mov rdi, prev_ad + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; Accept the current string, with the maximum possible length. + +LenMaximum: + mov r11d,MAX_MATCH + mov match_start, r8d + +;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len; +;;; return s->lookahead; + +LeaveNow: +IFDEF INFOZIP + mov eax,r11d +ELSE + mov eax, Lookahead + cmp r11d, eax + cmovng eax, r11d +ENDIF + +;;; Restore the stack and return from whence we came. + + + mov rsi,[save_rsi] + mov rdi,[save_rdi] + mov rbx,[save_rbx] + mov rbp,[save_rbp] + mov r12,[save_r12] + mov r13,[save_r13] +; mov r14,[save_r14] +; mov r15,[save_r15] + + + ret 0 +; please don't remove this string ! +; Your can freely use gvmat64 in any free or commercial app +; but it is far better don't remove the string in the binary! + db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0 +longest_match ENDP + +match_init PROC + ret 0 +match_init ENDP + + +END diff --git a/src/SDL2/external/zlib-1.2.8/contrib/masmx64/inffas8664.c b/src/SDL2/external/zlib-1.2.8/contrib/masmx64/inffas8664.c new file mode 100644 index 000000000..e8af06fa0 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/masmx64/inffas8664.c @@ -0,0 +1,186 @@ +/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding + * version for AMD64 on Windows using Microsoft C compiler + * + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Copyright (C) 2003 Chris Anderson + * Please use the copyright conditions above. + * + * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant + * + * inffas8664.c call function inffas8664fnc in inffasx64.asm + * inffasx64.asm is automatically convert from AMD64 portion of inffas86.c + * + * Dec-29-2003 -- I added AMD64 inflate asm support. This version is also + * slightly quicker on x86 systems because, instead of using rep movsb to copy + * data, it uses rep movsw, which moves data in 2-byte chunks instead of single + * bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates + * from http://fedora.linux.duke.edu/fc1_x86_64 + * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with + * 1GB ram. The 64-bit version is about 4% faster than the 32-bit version, + * when decompressing mozilla-source-1.3.tar.gz. + * + * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from + * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at + * the moment. I have successfully compiled and tested this code with gcc2.96, + * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S + * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX + * enabled. I will attempt to merge the MMX code into this version. Newer + * versions of this and inffast.S can be found at + * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/ + * + */ + +#include +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +/* Mark Adler's comments from inffast.c: */ + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ + + + + typedef struct inffast_ar { +/* 64 32 x86 x86_64 */ +/* ar offset register */ +/* 0 0 */ void *esp; /* esp save */ +/* 8 4 */ void *ebp; /* ebp save */ +/* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */ +/* 24 12 */ unsigned char FAR *last; /* r9 while in < last */ +/* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */ +/* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */ +/* 48 24 */ unsigned char FAR *end; /* r10 while out < end */ +/* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */ +/* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */ +/* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */ +/* 80 40 */ size_t /*unsigned long */hold; /* edx rdx local strm->hold */ +/* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */ +/* 92 48 */ unsigned wsize; /* window size */ +/* 96 52 */ unsigned write; /* window write index */ +/*100 56 */ unsigned lmask; /* r12 mask for lcode */ +/*104 60 */ unsigned dmask; /* r13 mask for dcode */ +/*108 64 */ unsigned len; /* r14 match length */ +/*112 68 */ unsigned dist; /* r15 match distance */ +/*116 72 */ unsigned status; /* set when state chng*/ + } type_ar; +#ifdef ASMINF + +void inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + type_ar ar; + void inffas8664fnc(struct inffast_ar * par); + + + +#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64)) +#define PAD_AVAIL_IN 6 +#define PAD_AVAIL_OUT 258 +#else +#define PAD_AVAIL_IN 5 +#define PAD_AVAIL_OUT 257 +#endif + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + + ar.in = strm->next_in; + ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN); + ar.out = strm->next_out; + ar.beg = ar.out - (start - strm->avail_out); + ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT); + ar.wsize = state->wsize; + ar.write = state->wnext; + ar.window = state->window; + ar.hold = state->hold; + ar.bits = state->bits; + ar.lcode = state->lencode; + ar.dcode = state->distcode; + ar.lmask = (1U << state->lenbits) - 1; + ar.dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + + /* align in on 1/2 hold size boundary */ + while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) { + ar.hold += (unsigned long)*ar.in++ << ar.bits; + ar.bits += 8; + } + + inffas8664fnc(&ar); + + if (ar.status > 1) { + if (ar.status == 2) + strm->msg = "invalid literal/length code"; + else if (ar.status == 3) + strm->msg = "invalid distance code"; + else + strm->msg = "invalid distance too far back"; + state->mode = BAD; + } + else if ( ar.status == 1 ) { + state->mode = TYPE; + } + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + ar.len = ar.bits >> 3; + ar.in -= ar.len; + ar.bits -= ar.len << 3; + ar.hold &= (1U << ar.bits) - 1; + + /* update state and return */ + strm->next_in = ar.in; + strm->next_out = ar.out; + strm->avail_in = (unsigned)(ar.in < ar.last ? + PAD_AVAIL_IN + (ar.last - ar.in) : + PAD_AVAIL_IN - (ar.in - ar.last)); + strm->avail_out = (unsigned)(ar.out < ar.end ? + PAD_AVAIL_OUT + (ar.end - ar.out) : + PAD_AVAIL_OUT - (ar.out - ar.end)); + state->hold = (unsigned long)ar.hold; + state->bits = ar.bits; + return; +} + +#endif diff --git a/src/SDL2/external/zlib-1.2.8/contrib/masmx64/inffasx64.asm b/src/SDL2/external/zlib-1.2.8/contrib/masmx64/inffasx64.asm new file mode 100644 index 000000000..60a8d89b7 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/masmx64/inffasx64.asm @@ -0,0 +1,396 @@ +; inffasx64.asm is a hand tuned assembler version of inffast.c - fast decoding +; version for AMD64 on Windows using Microsoft C compiler +; +; inffasx64.asm is automatically convert from AMD64 portion of inffas86.c +; inffasx64.asm is called by inffas8664.c, which contain more info. + + +; to compile this file, I use option +; ml64.exe /Flinffasx64 /c /Zi inffasx64.asm +; with Microsoft Macro Assembler (x64) for AMD64 +; + +; This file compile with Microsoft Macro Assembler (x64) for AMD64 +; +; ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK +; +; (you can get Windows WDK with ml64 for AMD64 from +; http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price) +; + + +.code +inffas8664fnc PROC + +; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and +; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp +; +; All registers must be preserved across the call, except for +; rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch. + + + mov [rsp-8],rsi + mov [rsp-16],rdi + mov [rsp-24],r12 + mov [rsp-32],r13 + mov [rsp-40],r14 + mov [rsp-48],r15 + mov [rsp-56],rbx + + mov rax,rcx + + mov [rax+8], rbp ; /* save regs rbp and rsp */ + mov [rax], rsp + + mov rsp, rax ; /* make rsp point to &ar */ + + mov rsi, [rsp+16] ; /* rsi = in */ + mov rdi, [rsp+32] ; /* rdi = out */ + mov r9, [rsp+24] ; /* r9 = last */ + mov r10, [rsp+48] ; /* r10 = end */ + mov rbp, [rsp+64] ; /* rbp = lcode */ + mov r11, [rsp+72] ; /* r11 = dcode */ + mov rdx, [rsp+80] ; /* rdx = hold */ + mov ebx, [rsp+88] ; /* ebx = bits */ + mov r12d, [rsp+100] ; /* r12d = lmask */ + mov r13d, [rsp+104] ; /* r13d = dmask */ + ; /* r14d = len */ + ; /* r15d = dist */ + + + cld + cmp r10, rdi + je L_one_time ; /* if only one decode left */ + cmp r9, rsi + + jne L_do_loop + + +L_one_time: + mov r8, r12 ; /* r8 = lmask */ + cmp bl, 32 + ja L_get_length_code_one_time + + lodsd ; /* eax = *(uint *)in++ */ + mov cl, bl ; /* cl = bits, needs it for shifting */ + add bl, 32 ; /* bits += 32 */ + shl rax, cl + or rdx, rax ; /* hold |= *((uint *)in)++ << bits */ + jmp L_get_length_code_one_time + +ALIGN 4 +L_while_test: + cmp r10, rdi + jbe L_break_loop + cmp r9, rsi + jbe L_break_loop + +L_do_loop: + mov r8, r12 ; /* r8 = lmask */ + cmp bl, 32 + ja L_get_length_code ; /* if (32 < bits) */ + + lodsd ; /* eax = *(uint *)in++ */ + mov cl, bl ; /* cl = bits, needs it for shifting */ + add bl, 32 ; /* bits += 32 */ + shl rax, cl + or rdx, rax ; /* hold |= *((uint *)in)++ << bits */ + +L_get_length_code: + and r8, rdx ; /* r8 &= hold */ + mov eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */ + + mov cl, ah ; /* cl = this.bits */ + sub bl, ah ; /* bits -= this.bits */ + shr rdx, cl ; /* hold >>= this.bits */ + + test al, al + jnz L_test_for_length_base ; /* if (op != 0) 45.7% */ + + mov r8, r12 ; /* r8 = lmask */ + shr eax, 16 ; /* output this.val char */ + stosb + +L_get_length_code_one_time: + and r8, rdx ; /* r8 &= hold */ + mov eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */ + +L_dolen: + mov cl, ah ; /* cl = this.bits */ + sub bl, ah ; /* bits -= this.bits */ + shr rdx, cl ; /* hold >>= this.bits */ + + test al, al + jnz L_test_for_length_base ; /* if (op != 0) 45.7% */ + + shr eax, 16 ; /* output this.val char */ + stosb + jmp L_while_test + +ALIGN 4 +L_test_for_length_base: + mov r14d, eax ; /* len = this */ + shr r14d, 16 ; /* len = this.val */ + mov cl, al + + test al, 16 + jz L_test_for_second_level_length ; /* if ((op & 16) == 0) 8% */ + and cl, 15 ; /* op &= 15 */ + jz L_decode_distance ; /* if (!op) */ + +L_add_bits_to_len: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx ; /* eax &= hold */ + shr rdx, cl + add r14d, eax ; /* len += hold & mask[op] */ + +L_decode_distance: + mov r8, r13 ; /* r8 = dmask */ + cmp bl, 32 + ja L_get_distance_code ; /* if (32 < bits) */ + + lodsd ; /* eax = *(uint *)in++ */ + mov cl, bl ; /* cl = bits, needs it for shifting */ + add bl, 32 ; /* bits += 32 */ + shl rax, cl + or rdx, rax ; /* hold |= *((uint *)in)++ << bits */ + +L_get_distance_code: + and r8, rdx ; /* r8 &= hold */ + mov eax, [r11+r8*4] ; /* eax = dcode[hold & dmask] */ + +L_dodist: + mov r15d, eax ; /* dist = this */ + shr r15d, 16 ; /* dist = this.val */ + mov cl, ah + sub bl, ah ; /* bits -= this.bits */ + shr rdx, cl ; /* hold >>= this.bits */ + mov cl, al ; /* cl = this.op */ + + test al, 16 ; /* if ((op & 16) == 0) */ + jz L_test_for_second_level_dist + and cl, 15 ; /* op &= 15 */ + jz L_check_dist_one + +L_add_bits_to_dist: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax ; /* (1 << op) - 1 */ + and eax, edx ; /* eax &= hold */ + shr rdx, cl + add r15d, eax ; /* dist += hold & ((1 << op) - 1) */ + +L_check_window: + mov r8, rsi ; /* save in so from can use it's reg */ + mov rax, rdi + sub rax, [rsp+40] ; /* nbytes = out - beg */ + + cmp eax, r15d + jb L_clip_window ; /* if (dist > nbytes) 4.2% */ + + mov ecx, r14d ; /* ecx = len */ + mov rsi, rdi + sub rsi, r15 ; /* from = out - dist */ + + sar ecx, 1 + jnc L_copy_two ; /* if len % 2 == 0 */ + + rep movsw + mov al, [rsi] + mov [rdi], al + inc rdi + + mov rsi, r8 ; /* move in back to %rsi, toss from */ + jmp L_while_test + +L_copy_two: + rep movsw + mov rsi, r8 ; /* move in back to %rsi, toss from */ + jmp L_while_test + +ALIGN 4 +L_check_dist_one: + cmp r15d, 1 ; /* if dist 1, is a memset */ + jne L_check_window + cmp [rsp+40], rdi ; /* if out == beg, outside window */ + je L_check_window + + mov ecx, r14d ; /* ecx = len */ + mov al, [rdi-1] + mov ah, al + + sar ecx, 1 + jnc L_set_two + mov [rdi], al + inc rdi + +L_set_two: + rep stosw + jmp L_while_test + +ALIGN 4 +L_test_for_second_level_length: + test al, 64 + jnz L_test_for_end_of_block ; /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx ; /* eax &= hold */ + add eax, r14d ; /* eax += len */ + mov eax, [rbp+rax*4] ; /* eax = lcode[val+(hold&mask[op])]*/ + jmp L_dolen + +ALIGN 4 +L_test_for_second_level_dist: + test al, 64 + jnz L_invalid_distance_code ; /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx ; /* eax &= hold */ + add eax, r15d ; /* eax += dist */ + mov eax, [r11+rax*4] ; /* eax = dcode[val+(hold&mask[op])]*/ + jmp L_dodist + +ALIGN 4 +L_clip_window: + mov ecx, eax ; /* ecx = nbytes */ + mov eax, [rsp+92] ; /* eax = wsize, prepare for dist cmp */ + neg ecx ; /* nbytes = -nbytes */ + + cmp eax, r15d + jb L_invalid_distance_too_far ; /* if (dist > wsize) */ + + add ecx, r15d ; /* nbytes = dist - nbytes */ + cmp dword ptr [rsp+96], 0 + jne L_wrap_around_window ; /* if (write != 0) */ + + mov rsi, [rsp+56] ; /* from = window */ + sub eax, ecx ; /* eax -= nbytes */ + add rsi, rax ; /* from += wsize - nbytes */ + + mov eax, r14d ; /* eax = len */ + cmp r14d, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* eax -= nbytes */ + rep movsb + mov rsi, rdi + sub rsi, r15 ; /* from = &out[ -dist ] */ + jmp L_do_copy + +ALIGN 4 +L_wrap_around_window: + mov eax, [rsp+96] ; /* eax = write */ + cmp ecx, eax + jbe L_contiguous_in_window ; /* if (write >= nbytes) */ + + mov esi, [rsp+92] ; /* from = wsize */ + add rsi, [rsp+56] ; /* from += window */ + add rsi, rax ; /* from += write */ + sub rsi, rcx ; /* from -= nbytes */ + sub ecx, eax ; /* nbytes -= write */ + + mov eax, r14d ; /* eax = len */ + cmp eax, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* len -= nbytes */ + rep movsb + mov rsi, [rsp+56] ; /* from = window */ + mov ecx, [rsp+96] ; /* nbytes = write */ + cmp eax, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* len -= nbytes */ + rep movsb + mov rsi, rdi + sub rsi, r15 ; /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_contiguous_in_window: + mov rsi, [rsp+56] ; /* rsi = window */ + add rsi, rax + sub rsi, rcx ; /* from += write - nbytes */ + + mov eax, r14d ; /* eax = len */ + cmp eax, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* len -= nbytes */ + rep movsb + mov rsi, rdi + sub rsi, r15 ; /* from = out - dist */ + jmp L_do_copy ; /* if (nbytes >= len) */ + +ALIGN 4 +L_do_copy: + mov ecx, eax ; /* ecx = len */ + rep movsb + + mov rsi, r8 ; /* move in back to %esi, toss from */ + jmp L_while_test + +L_test_for_end_of_block: + test al, 32 + jz L_invalid_literal_length_code + mov dword ptr [rsp+116], 1 + jmp L_break_loop_with_status + +L_invalid_literal_length_code: + mov dword ptr [rsp+116], 2 + jmp L_break_loop_with_status + +L_invalid_distance_code: + mov dword ptr [rsp+116], 3 + jmp L_break_loop_with_status + +L_invalid_distance_too_far: + mov dword ptr [rsp+116], 4 + jmp L_break_loop_with_status + +L_break_loop: + mov dword ptr [rsp+116], 0 + +L_break_loop_with_status: +; /* put in, out, bits, and hold back into ar and pop esp */ + mov [rsp+16], rsi ; /* in */ + mov [rsp+32], rdi ; /* out */ + mov [rsp+88], ebx ; /* bits */ + mov [rsp+80], rdx ; /* hold */ + + mov rax, [rsp] ; /* restore rbp and rsp */ + mov rbp, [rsp+8] + mov rsp, rax + + + + mov rsi,[rsp-8] + mov rdi,[rsp-16] + mov r12,[rsp-24] + mov r13,[rsp-32] + mov r14,[rsp-40] + mov r15,[rsp-48] + mov rbx,[rsp-56] + + ret 0 +; : +; : "m" (ar) +; : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", +; "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15" +; ); + +inffas8664fnc ENDP +;_TEXT ENDS +END diff --git a/src/SDL2/external/zlib-1.2.8/contrib/masmx64/readme.txt b/src/SDL2/external/zlib-1.2.8/contrib/masmx64/readme.txt new file mode 100644 index 000000000..2da673341 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/masmx64/readme.txt @@ -0,0 +1,31 @@ +Summary +------- +This directory contains ASM implementations of the functions +longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t), +for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits. + +gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits + assembly optimized version from Jean-loup Gailly original longest_match function + +inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing + original function from Mark Adler + +Use instructions +---------------- +Assemble the .asm files using MASM and put the object files into the zlib source +directory. You can also get object files here: + + http://www.winimage.com/zLibDll/zlib124_masm_obj.zip + +define ASMV and ASMINF in your project. Include inffas8664.c in your source tree, +and inffasx64.obj and gvmat64.obj as object to link. + + +Build instructions +------------------ +run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe) + +ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK + +You can get Windows 2003 server DDK with ml64 and cl for AMD64 from + http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price) diff --git a/src/SDL2/external/zlib-1.2.8/contrib/masmx86/bld_ml32.bat b/src/SDL2/external/zlib-1.2.8/contrib/masmx86/bld_ml32.bat new file mode 100644 index 000000000..e1b86bf68 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/masmx86/bld_ml32.bat @@ -0,0 +1,2 @@ +ml /coff /Zi /c /Flmatch686.lst match686.asm +ml /coff /Zi /c /Flinffas32.lst inffas32.asm diff --git a/src/SDL2/external/zlib-1.2.8/contrib/masmx86/inffas32.asm b/src/SDL2/external/zlib-1.2.8/contrib/masmx86/inffas32.asm new file mode 100644 index 000000000..03d20f838 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/masmx86/inffas32.asm @@ -0,0 +1,1080 @@ +;/* inffas32.asm is a hand tuned assembler version of inffast.c -- fast decoding +; * +; * inffas32.asm is derivated from inffas86.c, with translation of assembly code +; * +; * Copyright (C) 1995-2003 Mark Adler +; * For conditions of distribution and use, see copyright notice in zlib.h +; * +; * Copyright (C) 2003 Chris Anderson +; * Please use the copyright conditions above. +; * +; * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from +; * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at +; * the moment. I have successfully compiled and tested this code with gcc2.96, +; * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S +; * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX +; * enabled. I will attempt to merge the MMX code into this version. Newer +; * versions of this and inffast.S can be found at +; * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/ +; * +; * 2005 : modification by Gilles Vollant +; */ +; For Visual C++ 4.x and higher and ML 6.x and higher +; ml.exe is in directory \MASM611C of Win95 DDK +; ml.exe is also distributed in http://www.masm32.com/masmdl.htm +; and in VC++2003 toolkit at http://msdn.microsoft.com/visualc/vctoolkit2003/ +; +; +; compile with command line option +; ml /coff /Zi /c /Flinffas32.lst inffas32.asm + +; if you define NO_GZIP (see inflate.h), compile with +; ml /coff /Zi /c /Flinffas32.lst /DNO_GUNZIP inffas32.asm + + +; zlib122sup is 0 fort zlib 1.2.2.1 and lower +; zlib122sup is 8 fort zlib 1.2.2.2 and more (with addition of dmax and head +; in inflate_state in inflate.h) +zlib1222sup equ 8 + + +IFDEF GUNZIP + INFLATE_MODE_TYPE equ 11 + INFLATE_MODE_BAD equ 26 +ELSE + IFNDEF NO_GUNZIP + INFLATE_MODE_TYPE equ 11 + INFLATE_MODE_BAD equ 26 + ELSE + INFLATE_MODE_TYPE equ 3 + INFLATE_MODE_BAD equ 17 + ENDIF +ENDIF + + +; 75 "inffast.S" +;FILE "inffast.S" + +;;;GLOBAL _inflate_fast + +;;;SECTION .text + + + + .586p + .mmx + + name inflate_fast_x86 + .MODEL FLAT + +_DATA segment +inflate_fast_use_mmx: + dd 1 + + +_TEXT segment + + + +ALIGN 4 + db 'Fast decoding Code from Chris Anderson' + db 0 + +ALIGN 4 +invalid_literal_length_code_msg: + db 'invalid literal/length code' + db 0 + +ALIGN 4 +invalid_distance_code_msg: + db 'invalid distance code' + db 0 + +ALIGN 4 +invalid_distance_too_far_msg: + db 'invalid distance too far back' + db 0 + + +ALIGN 4 +inflate_fast_mask: +dd 0 +dd 1 +dd 3 +dd 7 +dd 15 +dd 31 +dd 63 +dd 127 +dd 255 +dd 511 +dd 1023 +dd 2047 +dd 4095 +dd 8191 +dd 16383 +dd 32767 +dd 65535 +dd 131071 +dd 262143 +dd 524287 +dd 1048575 +dd 2097151 +dd 4194303 +dd 8388607 +dd 16777215 +dd 33554431 +dd 67108863 +dd 134217727 +dd 268435455 +dd 536870911 +dd 1073741823 +dd 2147483647 +dd 4294967295 + + +mode_state equ 0 ;/* state->mode */ +wsize_state equ (32+zlib1222sup) ;/* state->wsize */ +write_state equ (36+4+zlib1222sup) ;/* state->write */ +window_state equ (40+4+zlib1222sup) ;/* state->window */ +hold_state equ (44+4+zlib1222sup) ;/* state->hold */ +bits_state equ (48+4+zlib1222sup) ;/* state->bits */ +lencode_state equ (64+4+zlib1222sup) ;/* state->lencode */ +distcode_state equ (68+4+zlib1222sup) ;/* state->distcode */ +lenbits_state equ (72+4+zlib1222sup) ;/* state->lenbits */ +distbits_state equ (76+4+zlib1222sup) ;/* state->distbits */ + + +;;SECTION .text +; 205 "inffast.S" +;GLOBAL inflate_fast_use_mmx + +;SECTION .data + + +; GLOBAL inflate_fast_use_mmx:object +;.size inflate_fast_use_mmx, 4 +; 226 "inffast.S" +;SECTION .text + +ALIGN 4 +_inflate_fast proc near +.FPO (16, 4, 0, 0, 1, 0) + push edi + push esi + push ebp + push ebx + pushfd + sub esp,64 + cld + + + + + mov esi, [esp+88] + mov edi, [esi+28] + + + + + + + + mov edx, [esi+4] + mov eax, [esi+0] + + add edx,eax + sub edx,11 + + mov [esp+44],eax + mov [esp+20],edx + + mov ebp, [esp+92] + mov ecx, [esi+16] + mov ebx, [esi+12] + + sub ebp,ecx + neg ebp + add ebp,ebx + + sub ecx,257 + add ecx,ebx + + mov [esp+60],ebx + mov [esp+40],ebp + mov [esp+16],ecx +; 285 "inffast.S" + mov eax, [edi+lencode_state] + mov ecx, [edi+distcode_state] + + mov [esp+8],eax + mov [esp+12],ecx + + mov eax,1 + mov ecx, [edi+lenbits_state] + shl eax,cl + dec eax + mov [esp+0],eax + + mov eax,1 + mov ecx, [edi+distbits_state] + shl eax,cl + dec eax + mov [esp+4],eax + + mov eax, [edi+wsize_state] + mov ecx, [edi+write_state] + mov edx, [edi+window_state] + + mov [esp+52],eax + mov [esp+48],ecx + mov [esp+56],edx + + mov ebp, [edi+hold_state] + mov ebx, [edi+bits_state] +; 321 "inffast.S" + mov esi, [esp+44] + mov ecx, [esp+20] + cmp ecx,esi + ja L_align_long + + add ecx,11 + sub ecx,esi + mov eax,12 + sub eax,ecx + lea edi, [esp+28] + rep movsb + mov ecx,eax + xor eax,eax + rep stosb + lea esi, [esp+28] + mov [esp+20],esi + jmp L_is_aligned + + +L_align_long: + test esi,3 + jz L_is_aligned + xor eax,eax + mov al, [esi] + inc esi + mov ecx,ebx + add ebx,8 + shl eax,cl + or ebp,eax + jmp L_align_long + +L_is_aligned: + mov edi, [esp+60] +; 366 "inffast.S" +L_check_mmx: + cmp dword ptr [inflate_fast_use_mmx],2 + je L_init_mmx + ja L_do_loop + + push eax + push ebx + push ecx + push edx + pushfd + mov eax, [esp] + xor dword ptr [esp],0200000h + + + + + popfd + pushfd + pop edx + xor edx,eax + jz L_dont_use_mmx + xor eax,eax + cpuid + cmp ebx,0756e6547h + jne L_dont_use_mmx + cmp ecx,06c65746eh + jne L_dont_use_mmx + cmp edx,049656e69h + jne L_dont_use_mmx + mov eax,1 + cpuid + shr eax,8 + and eax,15 + cmp eax,6 + jne L_dont_use_mmx + test edx,0800000h + jnz L_use_mmx + jmp L_dont_use_mmx +L_use_mmx: + mov dword ptr [inflate_fast_use_mmx],2 + jmp L_check_mmx_pop +L_dont_use_mmx: + mov dword ptr [inflate_fast_use_mmx],3 +L_check_mmx_pop: + pop edx + pop ecx + pop ebx + pop eax + jmp L_check_mmx +; 426 "inffast.S" +ALIGN 4 +L_do_loop: +; 437 "inffast.S" + cmp bl,15 + ja L_get_length_code + + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + +L_get_length_code: + mov edx, [esp+0] + mov ecx, [esp+8] + and edx,ebp + mov eax, [ecx+edx*4] + +L_dolen: + + + + + + + mov cl,ah + sub bl,ah + shr ebp,cl + + + + + + + test al,al + jnz L_test_for_length_base + + shr eax,16 + stosb + +L_while_test: + + + cmp [esp+16],edi + jbe L_break_loop + + cmp [esp+20],esi + ja L_do_loop + jmp L_break_loop + +L_test_for_length_base: +; 502 "inffast.S" + mov edx,eax + shr edx,16 + mov cl,al + + test al,16 + jz L_test_for_second_level_length + and cl,15 + jz L_save_len + cmp bl,cl + jae L_add_bits_to_len + + mov ch,cl + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + mov cl,ch + +L_add_bits_to_len: + mov eax,1 + shl eax,cl + dec eax + sub bl,cl + and eax,ebp + shr ebp,cl + add edx,eax + +L_save_len: + mov [esp+24],edx + + +L_decode_distance: +; 549 "inffast.S" + cmp bl,15 + ja L_get_distance_code + + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + +L_get_distance_code: + mov edx, [esp+4] + mov ecx, [esp+12] + and edx,ebp + mov eax, [ecx+edx*4] + + +L_dodist: + mov edx,eax + shr edx,16 + mov cl,ah + sub bl,ah + shr ebp,cl +; 584 "inffast.S" + mov cl,al + + test al,16 + jz L_test_for_second_level_dist + and cl,15 + jz L_check_dist_one + cmp bl,cl + jae L_add_bits_to_dist + + mov ch,cl + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + mov cl,ch + +L_add_bits_to_dist: + mov eax,1 + shl eax,cl + dec eax + sub bl,cl + and eax,ebp + shr ebp,cl + add edx,eax + jmp L_check_window + +L_check_window: +; 625 "inffast.S" + mov [esp+44],esi + mov eax,edi + sub eax, [esp+40] + + cmp eax,edx + jb L_clip_window + + mov ecx, [esp+24] + mov esi,edi + sub esi,edx + + sub ecx,3 + mov al, [esi] + mov [edi],al + mov al, [esi+1] + mov dl, [esi+2] + add esi,3 + mov [edi+1],al + mov [edi+2],dl + add edi,3 + rep movsb + + mov esi, [esp+44] + jmp L_while_test + +ALIGN 4 +L_check_dist_one: + cmp edx,1 + jne L_check_window + cmp [esp+40],edi + je L_check_window + + dec edi + mov ecx, [esp+24] + mov al, [edi] + sub ecx,3 + + mov [edi+1],al + mov [edi+2],al + mov [edi+3],al + add edi,4 + rep stosb + + jmp L_while_test + +ALIGN 4 +L_test_for_second_level_length: + + + + + test al,64 + jnz L_test_for_end_of_block + + mov eax,1 + shl eax,cl + dec eax + and eax,ebp + add eax,edx + mov edx, [esp+8] + mov eax, [edx+eax*4] + jmp L_dolen + +ALIGN 4 +L_test_for_second_level_dist: + + + + + test al,64 + jnz L_invalid_distance_code + + mov eax,1 + shl eax,cl + dec eax + and eax,ebp + add eax,edx + mov edx, [esp+12] + mov eax, [edx+eax*4] + jmp L_dodist + +ALIGN 4 +L_clip_window: +; 721 "inffast.S" + mov ecx,eax + mov eax, [esp+52] + neg ecx + mov esi, [esp+56] + + cmp eax,edx + jb L_invalid_distance_too_far + + add ecx,edx + cmp dword ptr [esp+48],0 + jne L_wrap_around_window + + sub eax,ecx + add esi,eax +; 749 "inffast.S" + mov eax, [esp+24] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + jmp L_do_copy1 + + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + jmp L_do_copy1 + +L_wrap_around_window: +; 793 "inffast.S" + mov eax, [esp+48] + cmp ecx,eax + jbe L_contiguous_in_window + + add esi, [esp+52] + add esi,eax + sub esi,ecx + sub ecx,eax + + + mov eax, [esp+24] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi, [esp+56] + mov ecx, [esp+48] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + jmp L_do_copy1 + +L_contiguous_in_window: +; 836 "inffast.S" + add esi,eax + sub esi,ecx + + + mov eax, [esp+24] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + +L_do_copy1: +; 862 "inffast.S" + mov ecx,eax + rep movsb + + mov esi, [esp+44] + jmp L_while_test +; 878 "inffast.S" +ALIGN 4 +L_init_mmx: + emms + + + + + + movd mm0,ebp + mov ebp,ebx +; 896 "inffast.S" + movd mm4,dword ptr [esp+0] + movq mm3,mm4 + movd mm5,dword ptr [esp+4] + movq mm2,mm5 + pxor mm1,mm1 + mov ebx, [esp+8] + jmp L_do_loop_mmx + +ALIGN 4 +L_do_loop_mmx: + psrlq mm0,mm1 + + cmp ebp,32 + ja L_get_length_code_mmx + + movd mm6,ebp + movd mm7,dword ptr [esi] + add esi,4 + psllq mm7,mm6 + add ebp,32 + por mm0,mm7 + +L_get_length_code_mmx: + pand mm4,mm0 + movd eax,mm4 + movq mm4,mm3 + mov eax, [ebx+eax*4] + +L_dolen_mmx: + movzx ecx,ah + movd mm1,ecx + sub ebp,ecx + + test al,al + jnz L_test_for_length_base_mmx + + shr eax,16 + stosb + +L_while_test_mmx: + + + cmp [esp+16],edi + jbe L_break_loop + + cmp [esp+20],esi + ja L_do_loop_mmx + jmp L_break_loop + +L_test_for_length_base_mmx: + + mov edx,eax + shr edx,16 + + test al,16 + jz L_test_for_second_level_length_mmx + and eax,15 + jz L_decode_distance_mmx + + psrlq mm0,mm1 + movd mm1,eax + movd ecx,mm0 + sub ebp,eax + and ecx, [inflate_fast_mask+eax*4] + add edx,ecx + +L_decode_distance_mmx: + psrlq mm0,mm1 + + cmp ebp,32 + ja L_get_dist_code_mmx + + movd mm6,ebp + movd mm7,dword ptr [esi] + add esi,4 + psllq mm7,mm6 + add ebp,32 + por mm0,mm7 + +L_get_dist_code_mmx: + mov ebx, [esp+12] + pand mm5,mm0 + movd eax,mm5 + movq mm5,mm2 + mov eax, [ebx+eax*4] + +L_dodist_mmx: + + movzx ecx,ah + mov ebx,eax + shr ebx,16 + sub ebp,ecx + movd mm1,ecx + + test al,16 + jz L_test_for_second_level_dist_mmx + and eax,15 + jz L_check_dist_one_mmx + +L_add_bits_to_dist_mmx: + psrlq mm0,mm1 + movd mm1,eax + movd ecx,mm0 + sub ebp,eax + and ecx, [inflate_fast_mask+eax*4] + add ebx,ecx + +L_check_window_mmx: + mov [esp+44],esi + mov eax,edi + sub eax, [esp+40] + + cmp eax,ebx + jb L_clip_window_mmx + + mov ecx,edx + mov esi,edi + sub esi,ebx + + sub ecx,3 + mov al, [esi] + mov [edi],al + mov al, [esi+1] + mov dl, [esi+2] + add esi,3 + mov [edi+1],al + mov [edi+2],dl + add edi,3 + rep movsb + + mov esi, [esp+44] + mov ebx, [esp+8] + jmp L_while_test_mmx + +ALIGN 4 +L_check_dist_one_mmx: + cmp ebx,1 + jne L_check_window_mmx + cmp [esp+40],edi + je L_check_window_mmx + + dec edi + mov ecx,edx + mov al, [edi] + sub ecx,3 + + mov [edi+1],al + mov [edi+2],al + mov [edi+3],al + add edi,4 + rep stosb + + mov ebx, [esp+8] + jmp L_while_test_mmx + +ALIGN 4 +L_test_for_second_level_length_mmx: + test al,64 + jnz L_test_for_end_of_block + + and eax,15 + psrlq mm0,mm1 + movd ecx,mm0 + and ecx, [inflate_fast_mask+eax*4] + add ecx,edx + mov eax, [ebx+ecx*4] + jmp L_dolen_mmx + +ALIGN 4 +L_test_for_second_level_dist_mmx: + test al,64 + jnz L_invalid_distance_code + + and eax,15 + psrlq mm0,mm1 + movd ecx,mm0 + and ecx, [inflate_fast_mask+eax*4] + mov eax, [esp+12] + add ecx,ebx + mov eax, [eax+ecx*4] + jmp L_dodist_mmx + +ALIGN 4 +L_clip_window_mmx: + + mov ecx,eax + mov eax, [esp+52] + neg ecx + mov esi, [esp+56] + + cmp eax,ebx + jb L_invalid_distance_too_far + + add ecx,ebx + cmp dword ptr [esp+48],0 + jne L_wrap_around_window_mmx + + sub eax,ecx + add esi,eax + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + jmp L_do_copy1_mmx + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + jmp L_do_copy1_mmx + +L_wrap_around_window_mmx: + + mov eax, [esp+48] + cmp ecx,eax + jbe L_contiguous_in_window_mmx + + add esi, [esp+52] + add esi,eax + sub esi,ecx + sub ecx,eax + + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi, [esp+56] + mov ecx, [esp+48] + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + jmp L_do_copy1_mmx + +L_contiguous_in_window_mmx: + + add esi,eax + sub esi,ecx + + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + +L_do_copy1_mmx: + + + mov ecx,edx + rep movsb + + mov esi, [esp+44] + mov ebx, [esp+8] + jmp L_while_test_mmx +; 1174 "inffast.S" +L_invalid_distance_code: + + + + + + mov ecx, invalid_distance_code_msg + mov edx,INFLATE_MODE_BAD + jmp L_update_stream_state + +L_test_for_end_of_block: + + + + + + test al,32 + jz L_invalid_literal_length_code + + mov ecx,0 + mov edx,INFLATE_MODE_TYPE + jmp L_update_stream_state + +L_invalid_literal_length_code: + + + + + + mov ecx, invalid_literal_length_code_msg + mov edx,INFLATE_MODE_BAD + jmp L_update_stream_state + +L_invalid_distance_too_far: + + + + mov esi, [esp+44] + mov ecx, invalid_distance_too_far_msg + mov edx,INFLATE_MODE_BAD + jmp L_update_stream_state + +L_update_stream_state: + + mov eax, [esp+88] + test ecx,ecx + jz L_skip_msg + mov [eax+24],ecx +L_skip_msg: + mov eax, [eax+28] + mov [eax+mode_state],edx + jmp L_break_loop + +ALIGN 4 +L_break_loop: +; 1243 "inffast.S" + cmp dword ptr [inflate_fast_use_mmx],2 + jne L_update_next_in + + + + mov ebx,ebp + +L_update_next_in: +; 1266 "inffast.S" + mov eax, [esp+88] + mov ecx,ebx + mov edx, [eax+28] + shr ecx,3 + sub esi,ecx + shl ecx,3 + sub ebx,ecx + mov [eax+12],edi + mov [edx+bits_state],ebx + mov ecx,ebx + + lea ebx, [esp+28] + cmp [esp+20],ebx + jne L_buf_not_used + + sub esi,ebx + mov ebx, [eax+0] + mov [esp+20],ebx + add esi,ebx + mov ebx, [eax+4] + sub ebx,11 + add [esp+20],ebx + +L_buf_not_used: + mov [eax+0],esi + + mov ebx,1 + shl ebx,cl + dec ebx + + + + + + cmp dword ptr [inflate_fast_use_mmx],2 + jne L_update_hold + + + + psrlq mm0,mm1 + movd ebp,mm0 + + emms + +L_update_hold: + + + + and ebp,ebx + mov [edx+hold_state],ebp + + + + + mov ebx, [esp+20] + cmp ebx,esi + jbe L_last_is_smaller + + sub ebx,esi + add ebx,11 + mov [eax+4],ebx + jmp L_fixup_out +L_last_is_smaller: + sub esi,ebx + neg esi + add esi,11 + mov [eax+4],esi + + + + +L_fixup_out: + + mov ebx, [esp+16] + cmp ebx,edi + jbe L_end_is_smaller + + sub ebx,edi + add ebx,257 + mov [eax+16],ebx + jmp L_done +L_end_is_smaller: + sub edi,ebx + neg edi + add edi,257 + mov [eax+16],edi + + + + + +L_done: + add esp,64 + popfd + pop ebx + pop ebp + pop esi + pop edi + ret +_inflate_fast endp + +_TEXT ends +end diff --git a/src/SDL2/external/zlib-1.2.8/contrib/masmx86/match686.asm b/src/SDL2/external/zlib-1.2.8/contrib/masmx86/match686.asm new file mode 100644 index 000000000..3b09212f8 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/masmx86/match686.asm @@ -0,0 +1,479 @@ +; match686.asm -- Asm portion of the optimized longest_match for 32 bits x86 +; Copyright (C) 1995-1996 Jean-loup Gailly, Brian Raiter and Gilles Vollant. +; File written by Gilles Vollant, by converting match686.S from Brian Raiter +; for MASM. This is as assembly version of longest_match +; from Jean-loup Gailly in deflate.c +; +; http://www.zlib.net +; http://www.winimage.com/zLibDll +; http://www.muppetlabs.com/~breadbox/software/assembly.html +; +; For Visual C++ 4.x and higher and ML 6.x and higher +; ml.exe is distributed in +; http://www.microsoft.com/downloads/details.aspx?FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64 +; +; this file contain two implementation of longest_match +; +; this longest_match was written by Brian raiter (1998), optimized for Pentium Pro +; (and the faster known version of match_init on modern Core 2 Duo and AMD Phenom) +; +; for using an assembly version of longest_match, you need define ASMV in project +; +; compile the asm file running +; ml /coff /Zi /c /Flmatch686.lst match686.asm +; and do not include match686.obj in your project +; +; note: contrib of zLib 1.2.3 and earlier contained both a deprecated version for +; Pentium (prior Pentium Pro) and this version for Pentium Pro and modern processor +; with autoselect (with cpu detection code) +; if you want support the old pentium optimization, you can still use these version +; +; this file is not optimized for old pentium, but it compatible with all x86 32 bits +; processor (starting 80386) +; +; +; see below : zlib1222add must be adjuster if you use a zlib version < 1.2.2.2 + +;uInt longest_match(s, cur_match) +; deflate_state *s; +; IPos cur_match; /* current match */ + + NbStack equ 76 + cur_match equ dword ptr[esp+NbStack-0] + str_s equ dword ptr[esp+NbStack-4] +; 5 dword on top (ret,ebp,esi,edi,ebx) + adrret equ dword ptr[esp+NbStack-8] + pushebp equ dword ptr[esp+NbStack-12] + pushedi equ dword ptr[esp+NbStack-16] + pushesi equ dword ptr[esp+NbStack-20] + pushebx equ dword ptr[esp+NbStack-24] + + chain_length equ dword ptr [esp+NbStack-28] + limit equ dword ptr [esp+NbStack-32] + best_len equ dword ptr [esp+NbStack-36] + window equ dword ptr [esp+NbStack-40] + prev equ dword ptr [esp+NbStack-44] + scan_start equ word ptr [esp+NbStack-48] + wmask equ dword ptr [esp+NbStack-52] + match_start_ptr equ dword ptr [esp+NbStack-56] + nice_match equ dword ptr [esp+NbStack-60] + scan equ dword ptr [esp+NbStack-64] + + windowlen equ dword ptr [esp+NbStack-68] + match_start equ dword ptr [esp+NbStack-72] + strend equ dword ptr [esp+NbStack-76] + NbStackAdd equ (NbStack-24) + + .386p + + name gvmatch + .MODEL FLAT + + + +; all the +zlib1222add offsets are due to the addition of fields +; in zlib in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). +; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). +; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). + + zlib1222add equ 8 + +; Note : these value are good with a 8 bytes boundary pack structure + dep_chain_length equ 74h+zlib1222add + dep_window equ 30h+zlib1222add + dep_strstart equ 64h+zlib1222add + dep_prev_length equ 70h+zlib1222add + dep_nice_match equ 88h+zlib1222add + dep_w_size equ 24h+zlib1222add + dep_prev equ 38h+zlib1222add + dep_w_mask equ 2ch+zlib1222add + dep_good_match equ 84h+zlib1222add + dep_match_start equ 68h+zlib1222add + dep_lookahead equ 6ch+zlib1222add + + +_TEXT segment + +IFDEF NOUNDERLINE + public longest_match + public match_init +ELSE + public _longest_match + public _match_init +ENDIF + + MAX_MATCH equ 258 + MIN_MATCH equ 3 + MIN_LOOKAHEAD equ (MAX_MATCH+MIN_MATCH+1) + + + +MAX_MATCH equ 258 +MIN_MATCH equ 3 +MIN_LOOKAHEAD equ (MAX_MATCH + MIN_MATCH + 1) +MAX_MATCH_8_ equ ((MAX_MATCH + 7) AND 0FFF0h) + + +;;; stack frame offsets + +chainlenwmask equ esp + 0 ; high word: current chain len + ; low word: s->wmask +window equ esp + 4 ; local copy of s->window +windowbestlen equ esp + 8 ; s->window + bestlen +scanstart equ esp + 16 ; first two bytes of string +scanend equ esp + 12 ; last two bytes of string +scanalign equ esp + 20 ; dword-misalignment of string +nicematch equ esp + 24 ; a good enough match size +bestlen equ esp + 28 ; size of best match so far +scan equ esp + 32 ; ptr to string wanting match + +LocalVarsSize equ 36 +; saved ebx byte esp + 36 +; saved edi byte esp + 40 +; saved esi byte esp + 44 +; saved ebp byte esp + 48 +; return address byte esp + 52 +deflatestate equ esp + 56 ; the function arguments +curmatch equ esp + 60 + +;;; Offsets for fields in the deflate_state structure. These numbers +;;; are calculated from the definition of deflate_state, with the +;;; assumption that the compiler will dword-align the fields. (Thus, +;;; changing the definition of deflate_state could easily cause this +;;; program to crash horribly, without so much as a warning at +;;; compile time. Sigh.) + +dsWSize equ 36+zlib1222add +dsWMask equ 44+zlib1222add +dsWindow equ 48+zlib1222add +dsPrev equ 56+zlib1222add +dsMatchLen equ 88+zlib1222add +dsPrevMatch equ 92+zlib1222add +dsStrStart equ 100+zlib1222add +dsMatchStart equ 104+zlib1222add +dsLookahead equ 108+zlib1222add +dsPrevLen equ 112+zlib1222add +dsMaxChainLen equ 116+zlib1222add +dsGoodMatch equ 132+zlib1222add +dsNiceMatch equ 136+zlib1222add + + +;;; match686.asm -- Pentium-Pro-optimized version of longest_match() +;;; Written for zlib 1.1.2 +;;; Copyright (C) 1998 Brian Raiter +;;; You can look at http://www.muppetlabs.com/~breadbox/software/assembly.html +;;; +;; +;; This software is provided 'as-is', without any express or implied +;; warranty. In no event will the authors be held liable for any damages +;; arising from the use of this software. +;; +;; Permission is granted to anyone to use this software for any purpose, +;; including commercial applications, and to alter it and redistribute it +;; freely, subject to the following restrictions: +;; +;; 1. The origin of this software must not be misrepresented; you must not +;; claim that you wrote the original software. If you use this software +;; in a product, an acknowledgment in the product documentation would be +;; appreciated but is not required. +;; 2. Altered source versions must be plainly marked as such, and must not be +;; misrepresented as being the original software +;; 3. This notice may not be removed or altered from any source distribution. +;; + +;GLOBAL _longest_match, _match_init + + +;SECTION .text + +;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch) + +;_longest_match: + IFDEF NOUNDERLINE + longest_match proc near + ELSE + _longest_match proc near + ENDIF +.FPO (9, 4, 0, 0, 1, 0) + +;;; Save registers that the compiler may be using, and adjust esp to +;;; make room for our stack frame. + + push ebp + push edi + push esi + push ebx + sub esp, LocalVarsSize + +;;; Retrieve the function arguments. ecx will hold cur_match +;;; throughout the entire function. edx will hold the pointer to the +;;; deflate_state structure during the function's setup (before +;;; entering the main loop. + + mov edx, [deflatestate] + mov ecx, [curmatch] + +;;; uInt wmask = s->w_mask; +;;; unsigned chain_length = s->max_chain_length; +;;; if (s->prev_length >= s->good_match) { +;;; chain_length >>= 2; +;;; } + + mov eax, [edx + dsPrevLen] + mov ebx, [edx + dsGoodMatch] + cmp eax, ebx + mov eax, [edx + dsWMask] + mov ebx, [edx + dsMaxChainLen] + jl LastMatchGood + shr ebx, 2 +LastMatchGood: + +;;; chainlen is decremented once beforehand so that the function can +;;; use the sign flag instead of the zero flag for the exit test. +;;; It is then shifted into the high word, to make room for the wmask +;;; value, which it will always accompany. + + dec ebx + shl ebx, 16 + or ebx, eax + mov [chainlenwmask], ebx + +;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + + mov eax, [edx + dsNiceMatch] + mov ebx, [edx + dsLookahead] + cmp ebx, eax + jl LookaheadLess + mov ebx, eax +LookaheadLess: mov [nicematch], ebx + +;;; register Bytef *scan = s->window + s->strstart; + + mov esi, [edx + dsWindow] + mov [window], esi + mov ebp, [edx + dsStrStart] + lea edi, [esi + ebp] + mov [scan], edi + +;;; Determine how many bytes the scan ptr is off from being +;;; dword-aligned. + + mov eax, edi + neg eax + and eax, 3 + mov [scanalign], eax + +;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ? +;;; s->strstart - (IPos)MAX_DIST(s) : NIL; + + mov eax, [edx + dsWSize] + sub eax, MIN_LOOKAHEAD + sub ebp, eax + jg LimitPositive + xor ebp, ebp +LimitPositive: + +;;; int best_len = s->prev_length; + + mov eax, [edx + dsPrevLen] + mov [bestlen], eax + +;;; Store the sum of s->window + best_len in esi locally, and in esi. + + add esi, eax + mov [windowbestlen], esi + +;;; register ush scan_start = *(ushf*)scan; +;;; register ush scan_end = *(ushf*)(scan+best_len-1); +;;; Posf *prev = s->prev; + + movzx ebx, word ptr [edi] + mov [scanstart], ebx + movzx ebx, word ptr [edi + eax - 1] + mov [scanend], ebx + mov edi, [edx + dsPrev] + +;;; Jump into the main loop. + + mov edx, [chainlenwmask] + jmp short LoopEntry + +align 4 + +;;; do { +;;; match = s->window + cur_match; +;;; if (*(ushf*)(match+best_len-1) != scan_end || +;;; *(ushf*)match != scan_start) continue; +;;; [...] +;;; } while ((cur_match = prev[cur_match & wmask]) > limit +;;; && --chain_length != 0); +;;; +;;; Here is the inner loop of the function. The function will spend the +;;; majority of its time in this loop, and majority of that time will +;;; be spent in the first ten instructions. +;;; +;;; Within this loop: +;;; ebx = scanend +;;; ecx = curmatch +;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) +;;; esi = windowbestlen - i.e., (window + bestlen) +;;; edi = prev +;;; ebp = limit + +LookupLoop: + and ecx, edx + movzx ecx, word ptr [edi + ecx*2] + cmp ecx, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow +LoopEntry: movzx eax, word ptr [esi + ecx - 1] + cmp eax, ebx + jnz LookupLoop + mov eax, [window] + movzx eax, word ptr [eax + ecx] + cmp eax, [scanstart] + jnz LookupLoop + +;;; Store the current value of chainlen. + + mov [chainlenwmask], edx + +;;; Point edi to the string under scrutiny, and esi to the string we +;;; are hoping to match it up with. In actuality, esi and edi are +;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is +;;; initialized to -(MAX_MATCH_8 - scanalign). + + mov esi, [window] + mov edi, [scan] + add esi, ecx + mov eax, [scanalign] + mov edx, 0fffffef8h; -(MAX_MATCH_8) + lea edi, [edi + eax + 0108h] ;MAX_MATCH_8] + lea esi, [esi + eax + 0108h] ;MAX_MATCH_8] + +;;; Test the strings for equality, 8 bytes at a time. At the end, +;;; adjust edx so that it is offset to the exact byte that mismatched. +;;; +;;; We already know at this point that the first three bytes of the +;;; strings match each other, and they can be safely passed over before +;;; starting the compare loop. So what this code does is skip over 0-3 +;;; bytes, as much as necessary in order to dword-align the edi +;;; pointer. (esi will still be misaligned three times out of four.) +;;; +;;; It should be confessed that this loop usually does not represent +;;; much of the total running time. Replacing it with a more +;;; straightforward "rep cmpsb" would not drastically degrade +;;; performance. + +LoopCmps: + mov eax, [esi + edx] + xor eax, [edi + edx] + jnz LeaveLoopCmps + mov eax, [esi + edx + 4] + xor eax, [edi + edx + 4] + jnz LeaveLoopCmps4 + add edx, 8 + jnz LoopCmps + jmp short LenMaximum +LeaveLoopCmps4: add edx, 4 +LeaveLoopCmps: test eax, 0000FFFFh + jnz LenLower + add edx, 2 + shr eax, 16 +LenLower: sub al, 1 + adc edx, 0 + +;;; Calculate the length of the match. If it is longer than MAX_MATCH, +;;; then automatically accept it as the best possible match and leave. + + lea eax, [edi + edx] + mov edi, [scan] + sub eax, edi + cmp eax, MAX_MATCH + jge LenMaximum + +;;; If the length of the match is not longer than the best match we +;;; have so far, then forget it and return to the lookup loop. + + mov edx, [deflatestate] + mov ebx, [bestlen] + cmp eax, ebx + jg LongerMatch + mov esi, [windowbestlen] + mov edi, [edx + dsPrev] + mov ebx, [scanend] + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; s->match_start = cur_match; +;;; best_len = len; +;;; if (len >= nice_match) break; +;;; scan_end = *(ushf*)(scan+best_len-1); + +LongerMatch: mov ebx, [nicematch] + mov [bestlen], eax + mov [edx + dsMatchStart], ecx + cmp eax, ebx + jge LeaveNow + mov esi, [window] + add esi, eax + mov [windowbestlen], esi + movzx ebx, word ptr [edi + eax - 1] + mov edi, [edx + dsPrev] + mov [scanend], ebx + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; Accept the current string, with the maximum possible length. + +LenMaximum: mov edx, [deflatestate] + mov dword ptr [bestlen], MAX_MATCH + mov [edx + dsMatchStart], ecx + +;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len; +;;; return s->lookahead; + +LeaveNow: + mov edx, [deflatestate] + mov ebx, [bestlen] + mov eax, [edx + dsLookahead] + cmp ebx, eax + jg LookaheadRet + mov eax, ebx +LookaheadRet: + +;;; Restore the stack and return from whence we came. + + add esp, LocalVarsSize + pop ebx + pop esi + pop edi + pop ebp + + ret +; please don't remove this string ! +; Your can freely use match686 in any free or commercial app if you don't remove the string in the binary! + db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah + + + IFDEF NOUNDERLINE + longest_match endp + ELSE + _longest_match endp + ENDIF + + IFDEF NOUNDERLINE + match_init proc near + ret + match_init endp + ELSE + _match_init proc near + ret + _match_init endp + ENDIF + + +_TEXT ends +end diff --git a/src/SDL2/external/zlib-1.2.8/contrib/masmx86/readme.txt b/src/SDL2/external/zlib-1.2.8/contrib/masmx86/readme.txt new file mode 100644 index 000000000..3271f720a --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/masmx86/readme.txt @@ -0,0 +1,27 @@ + +Summary +------- +This directory contains ASM implementations of the functions +longest_match() and inflate_fast(). + + +Use instructions +---------------- +Assemble using MASM, and copy the object files into the zlib source +directory, then run the appropriate makefile, as suggested below. You can +donwload MASM from here: + + http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64 + +You can also get objects files here: + + http://www.winimage.com/zLibDll/zlib124_masm_obj.zip + +Build instructions +------------------ +* With Microsoft C and MASM: +nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" + +* With Borland C and TASM: +make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" OBJPA="+match686c.obj+match686.obj+inffas32.obj" + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/Makefile.am b/src/SDL2/external/zlib-1.2.8/contrib/minizip/Makefile.am new file mode 100644 index 000000000..d343011eb --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/Makefile.am @@ -0,0 +1,45 @@ +lib_LTLIBRARIES = libminizip.la + +if COND_DEMOS +bin_PROGRAMS = miniunzip minizip +endif + +zlib_top_srcdir = $(top_srcdir)/../.. +zlib_top_builddir = $(top_builddir)/../.. + +AM_CPPFLAGS = -I$(zlib_top_srcdir) +AM_LDFLAGS = -L$(zlib_top_builddir) + +if WIN32 +iowin32_src = iowin32.c +iowin32_h = iowin32.h +endif + +libminizip_la_SOURCES = \ + ioapi.c \ + mztools.c \ + unzip.c \ + zip.c \ + ${iowin32_src} + +libminizip_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0 -lz + +minizip_includedir = $(includedir)/minizip +minizip_include_HEADERS = \ + crypt.h \ + ioapi.h \ + mztools.h \ + unzip.h \ + zip.h \ + ${iowin32_h} + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = minizip.pc + +EXTRA_PROGRAMS = miniunzip minizip + +miniunzip_SOURCES = miniunz.c +miniunzip_LDADD = libminizip.la + +minizip_SOURCES = minizip.c +minizip_LDADD = libminizip.la -lz diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/MiniZip64_Changes.txt b/src/SDL2/external/zlib-1.2.8/contrib/minizip/MiniZip64_Changes.txt new file mode 100644 index 000000000..13a1bd91a --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/MiniZip64_Changes.txt @@ -0,0 +1,6 @@ + +MiniZip 1.1 was derrived from MiniZip at version 1.01f + +Change in 1.0 (Okt 2009) + - **TODO - Add history** + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/MiniZip64_info.txt b/src/SDL2/external/zlib-1.2.8/contrib/minizip/MiniZip64_info.txt new file mode 100644 index 000000000..57d715242 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/MiniZip64_info.txt @@ -0,0 +1,74 @@ +MiniZip - Copyright (c) 1998-2010 - by Gilles Vollant - version 1.1 64 bits from Mathias Svensson + +Introduction +--------------------- +MiniZip 1.1 is built from MiniZip 1.0 by Gilles Vollant ( http://www.winimage.com/zLibDll/minizip.html ) + +When adding ZIP64 support into minizip it would result into risk of breaking compatibility with minizip 1.0. +All possible work was done for compatibility. + + +Background +--------------------- +When adding ZIP64 support Mathias Svensson found that Even Rouault have added ZIP64 +support for unzip.c into minizip for a open source project called gdal ( http://www.gdal.org/ ) + +That was used as a starting point. And after that ZIP64 support was added to zip.c +some refactoring and code cleanup was also done. + + +Changed from MiniZip 1.0 to MiniZip 1.1 +--------------------------------------- +* Added ZIP64 support for unzip ( by Even Rouault ) +* Added ZIP64 support for zip ( by Mathias Svensson ) +* Reverted some changed that Even Rouault did. +* Bunch of patches received from Gulles Vollant that he received for MiniZip from various users. +* Added unzip patch for BZIP Compression method (patch create by Daniel Borca) +* Added BZIP Compress method for zip +* Did some refactoring and code cleanup + + +Credits + + Gilles Vollant - Original MiniZip author + Even Rouault - ZIP64 unzip Support + Daniel Borca - BZip Compression method support in unzip + Mathias Svensson - ZIP64 zip support + Mathias Svensson - BZip Compression method support in zip + + Resources + + ZipLayout http://result42.com/projects/ZipFileLayout + Command line tool for Windows that shows the layout and information of the headers in a zip archive. + Used when debugging and validating the creation of zip files using MiniZip64 + + + ZIP App Note http://www.pkware.com/documents/casestudies/APPNOTE.TXT + Zip File specification + + +Notes. + * To be able to use BZip compression method in zip64.c or unzip64.c the BZIP2 lib is needed and HAVE_BZIP2 need to be defined. + +License +---------------------------------------------------------- + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + +---------------------------------------------------------- + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/configure.ac b/src/SDL2/external/zlib-1.2.8/contrib/minizip/configure.ac new file mode 100644 index 000000000..827a4e057 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/configure.ac @@ -0,0 +1,32 @@ +# -*- Autoconf -*- +# Process this file with autoconf to produce a configure script. + +AC_INIT([minizip], [1.2.8], [bugzilla.redhat.com]) +AC_CONFIG_SRCDIR([minizip.c]) +AM_INIT_AUTOMAKE([foreign]) +LT_INIT + +AC_MSG_CHECKING([whether to build example programs]) +AC_ARG_ENABLE([demos], AC_HELP_STRING([--enable-demos], [build example programs])) +AM_CONDITIONAL([COND_DEMOS], [test "$enable_demos" = yes]) +if test "$enable_demos" = yes +then + AC_MSG_RESULT([yes]) +else + AC_MSG_RESULT([no]) +fi + +case "${host}" in + *-mingw* | mingw*) + WIN32="yes" + ;; + *) + ;; +esac +AM_CONDITIONAL([WIN32], [test "${WIN32}" = "yes"]) + + +AC_SUBST([HAVE_UNISTD_H], [0]) +AC_CHECK_HEADER([unistd.h], [HAVE_UNISTD_H=1], []) +AC_CONFIG_FILES([Makefile minizip.pc]) +AC_OUTPUT diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/crypt.h b/src/SDL2/external/zlib-1.2.8/contrib/minizip/crypt.h new file mode 100644 index 000000000..1e9e8200b --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/crypt.h @@ -0,0 +1,131 @@ +/* crypt.h -- base code for crypt/uncrypt ZIPfile + + + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant + + This code is a modified version of crypting code in Infozip distribution + + The encryption/decryption parts of this source code (as opposed to the + non-echoing password parts) were originally written in Europe. The + whole source package can be freely distributed, including from the USA. + (Prior to January 2000, re-export from the US was a violation of US law.) + + This encryption code is a direct transcription of the algorithm from + Roger Schlafly, described by Phil Katz in the file appnote.txt. This + file (appnote.txt) is distributed with the PKZIP program (even in the + version without encryption capabilities). + + If you don't need crypting in your application, just define symbols + NOCRYPT and NOUNCRYPT. + + This code support the "Traditional PKWARE Encryption". + + The new AES encryption added on Zip format by Winzip (see the page + http://www.winzip.com/aes_info.htm ) and PKWare PKZip 5.x Strong + Encryption is not supported. +*/ + +#define CRC32(c, b) ((*(pcrc_32_tab+(((int)(c) ^ (b)) & 0xff))) ^ ((c) >> 8)) + +/*********************************************************************** + * Return the next byte in the pseudo-random sequence + */ +static int decrypt_byte(unsigned long* pkeys, const z_crc_t* pcrc_32_tab) +{ + unsigned temp; /* POTENTIAL BUG: temp*(temp^1) may overflow in an + * unpredictable manner on 16-bit systems; not a problem + * with any known compiler so far, though */ + + temp = ((unsigned)(*(pkeys+2)) & 0xffff) | 2; + return (int)(((temp * (temp ^ 1)) >> 8) & 0xff); +} + +/*********************************************************************** + * Update the encryption keys with the next byte of plain text + */ +static int update_keys(unsigned long* pkeys,const z_crc_t* pcrc_32_tab,int c) +{ + (*(pkeys+0)) = CRC32((*(pkeys+0)), c); + (*(pkeys+1)) += (*(pkeys+0)) & 0xff; + (*(pkeys+1)) = (*(pkeys+1)) * 134775813L + 1; + { + register int keyshift = (int)((*(pkeys+1)) >> 24); + (*(pkeys+2)) = CRC32((*(pkeys+2)), keyshift); + } + return c; +} + + +/*********************************************************************** + * Initialize the encryption keys and the random header according to + * the given password. + */ +static void init_keys(const char* passwd,unsigned long* pkeys,const z_crc_t* pcrc_32_tab) +{ + *(pkeys+0) = 305419896L; + *(pkeys+1) = 591751049L; + *(pkeys+2) = 878082192L; + while (*passwd != '\0') { + update_keys(pkeys,pcrc_32_tab,(int)*passwd); + passwd++; + } +} + +#define zdecode(pkeys,pcrc_32_tab,c) \ + (update_keys(pkeys,pcrc_32_tab,c ^= decrypt_byte(pkeys,pcrc_32_tab))) + +#define zencode(pkeys,pcrc_32_tab,c,t) \ + (t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), t^(c)) + +#ifdef INCLUDECRYPTINGCODE_IFCRYPTALLOWED + +#define RAND_HEAD_LEN 12 + /* "last resort" source for second part of crypt seed pattern */ +# ifndef ZCR_SEED2 +# define ZCR_SEED2 3141592654UL /* use PI as default pattern */ +# endif + +static int crypthead(const char* passwd, /* password string */ + unsigned char* buf, /* where to write header */ + int bufSize, + unsigned long* pkeys, + const z_crc_t* pcrc_32_tab, + unsigned long crcForCrypting) +{ + int n; /* index in random header */ + int t; /* temporary */ + int c; /* random byte */ + unsigned char header[RAND_HEAD_LEN-2]; /* random header */ + static unsigned calls = 0; /* ensure different random header each time */ + + if (bufSize> 7) & 0xff; + header[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, c, t); + } + /* Encrypt random header (last two bytes is high word of crc) */ + init_keys(passwd, pkeys, pcrc_32_tab); + for (n = 0; n < RAND_HEAD_LEN-2; n++) + { + buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t); + } + buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t); + buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t); + return n; +} + +#endif diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/ioapi.c b/src/SDL2/external/zlib-1.2.8/contrib/minizip/ioapi.c new file mode 100644 index 000000000..7f5c191b2 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/ioapi.c @@ -0,0 +1,247 @@ +/* ioapi.h -- IO base function header for compress/uncompress .zip + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + +*/ + +#if defined(_WIN32) && (!(defined(_CRT_SECURE_NO_WARNINGS))) + #define _CRT_SECURE_NO_WARNINGS +#endif + +#if defined(__APPLE__) || defined(IOAPI_NO_64) +// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions +#define FOPEN_FUNC(filename, mode) fopen(filename, mode) +#define FTELLO_FUNC(stream) ftello(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin) +#else +#define FOPEN_FUNC(filename, mode) fopen64(filename, mode) +#define FTELLO_FUNC(stream) ftello64(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin) +#endif + + +#include "ioapi.h" + +voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode) +{ + if (pfilefunc->zfile_func64.zopen64_file != NULL) + return (*(pfilefunc->zfile_func64.zopen64_file)) (pfilefunc->zfile_func64.opaque,filename,mode); + else + { + return (*(pfilefunc->zopen32_file))(pfilefunc->zfile_func64.opaque,(const char*)filename,mode); + } +} + +long call_zseek64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin) +{ + if (pfilefunc->zfile_func64.zseek64_file != NULL) + return (*(pfilefunc->zfile_func64.zseek64_file)) (pfilefunc->zfile_func64.opaque,filestream,offset,origin); + else + { + uLong offsetTruncated = (uLong)offset; + if (offsetTruncated != offset) + return -1; + else + return (*(pfilefunc->zseek32_file))(pfilefunc->zfile_func64.opaque,filestream,offsetTruncated,origin); + } +} + +ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream) +{ + if (pfilefunc->zfile_func64.zseek64_file != NULL) + return (*(pfilefunc->zfile_func64.ztell64_file)) (pfilefunc->zfile_func64.opaque,filestream); + else + { + uLong tell_uLong = (*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream); + if ((tell_uLong) == MAXU32) + return (ZPOS64_T)-1; + else + return tell_uLong; + } +} + +void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32) +{ + p_filefunc64_32->zfile_func64.zopen64_file = NULL; + p_filefunc64_32->zopen32_file = p_filefunc32->zopen_file; + p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file; + p_filefunc64_32->zfile_func64.zread_file = p_filefunc32->zread_file; + p_filefunc64_32->zfile_func64.zwrite_file = p_filefunc32->zwrite_file; + p_filefunc64_32->zfile_func64.ztell64_file = NULL; + p_filefunc64_32->zfile_func64.zseek64_file = NULL; + p_filefunc64_32->zfile_func64.zclose_file = p_filefunc32->zclose_file; + p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file; + p_filefunc64_32->zfile_func64.opaque = p_filefunc32->opaque; + p_filefunc64_32->zseek32_file = p_filefunc32->zseek_file; + p_filefunc64_32->ztell32_file = p_filefunc32->ztell_file; +} + + + +static voidpf ZCALLBACK fopen_file_func OF((voidpf opaque, const char* filename, int mode)); +static uLong ZCALLBACK fread_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size)); +static uLong ZCALLBACK fwrite_file_func OF((voidpf opaque, voidpf stream, const void* buf,uLong size)); +static ZPOS64_T ZCALLBACK ftell64_file_func OF((voidpf opaque, voidpf stream)); +static long ZCALLBACK fseek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin)); +static int ZCALLBACK fclose_file_func OF((voidpf opaque, voidpf stream)); +static int ZCALLBACK ferror_file_func OF((voidpf opaque, voidpf stream)); + +static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, int mode) +{ + FILE* file = NULL; + const char* mode_fopen = NULL; + if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ) + mode_fopen = "rb"; + else + if (mode & ZLIB_FILEFUNC_MODE_EXISTING) + mode_fopen = "r+b"; + else + if (mode & ZLIB_FILEFUNC_MODE_CREATE) + mode_fopen = "wb"; + + if ((filename!=NULL) && (mode_fopen != NULL)) + file = fopen(filename, mode_fopen); + return file; +} + +static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename, int mode) +{ + FILE* file = NULL; + const char* mode_fopen = NULL; + if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ) + mode_fopen = "rb"; + else + if (mode & ZLIB_FILEFUNC_MODE_EXISTING) + mode_fopen = "r+b"; + else + if (mode & ZLIB_FILEFUNC_MODE_CREATE) + mode_fopen = "wb"; + + if ((filename!=NULL) && (mode_fopen != NULL)) + file = FOPEN_FUNC((const char*)filename, mode_fopen); + return file; +} + + +static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf, uLong size) +{ + uLong ret; + ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream); + return ret; +} + +static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const void* buf, uLong size) +{ + uLong ret; + ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream); + return ret; +} + +static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream) +{ + long ret; + ret = ftell((FILE *)stream); + return ret; +} + + +static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream) +{ + ZPOS64_T ret; + ret = FTELLO_FUNC((FILE *)stream); + return ret; +} + +static long ZCALLBACK fseek_file_func (voidpf opaque, voidpf stream, uLong offset, int origin) +{ + int fseek_origin=0; + long ret; + switch (origin) + { + case ZLIB_FILEFUNC_SEEK_CUR : + fseek_origin = SEEK_CUR; + break; + case ZLIB_FILEFUNC_SEEK_END : + fseek_origin = SEEK_END; + break; + case ZLIB_FILEFUNC_SEEK_SET : + fseek_origin = SEEK_SET; + break; + default: return -1; + } + ret = 0; + if (fseek((FILE *)stream, offset, fseek_origin) != 0) + ret = -1; + return ret; +} + +static long ZCALLBACK fseek64_file_func (voidpf opaque, voidpf stream, ZPOS64_T offset, int origin) +{ + int fseek_origin=0; + long ret; + switch (origin) + { + case ZLIB_FILEFUNC_SEEK_CUR : + fseek_origin = SEEK_CUR; + break; + case ZLIB_FILEFUNC_SEEK_END : + fseek_origin = SEEK_END; + break; + case ZLIB_FILEFUNC_SEEK_SET : + fseek_origin = SEEK_SET; + break; + default: return -1; + } + ret = 0; + + if(FSEEKO_FUNC((FILE *)stream, offset, fseek_origin) != 0) + ret = -1; + + return ret; +} + + +static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream) +{ + int ret; + ret = fclose((FILE *)stream); + return ret; +} + +static int ZCALLBACK ferror_file_func (voidpf opaque, voidpf stream) +{ + int ret; + ret = ferror((FILE *)stream); + return ret; +} + +void fill_fopen_filefunc (pzlib_filefunc_def) + zlib_filefunc_def* pzlib_filefunc_def; +{ + pzlib_filefunc_def->zopen_file = fopen_file_func; + pzlib_filefunc_def->zread_file = fread_file_func; + pzlib_filefunc_def->zwrite_file = fwrite_file_func; + pzlib_filefunc_def->ztell_file = ftell_file_func; + pzlib_filefunc_def->zseek_file = fseek_file_func; + pzlib_filefunc_def->zclose_file = fclose_file_func; + pzlib_filefunc_def->zerror_file = ferror_file_func; + pzlib_filefunc_def->opaque = NULL; +} + +void fill_fopen64_filefunc (zlib_filefunc64_def* pzlib_filefunc_def) +{ + pzlib_filefunc_def->zopen64_file = fopen64_file_func; + pzlib_filefunc_def->zread_file = fread_file_func; + pzlib_filefunc_def->zwrite_file = fwrite_file_func; + pzlib_filefunc_def->ztell64_file = ftell64_file_func; + pzlib_filefunc_def->zseek64_file = fseek64_file_func; + pzlib_filefunc_def->zclose_file = fclose_file_func; + pzlib_filefunc_def->zerror_file = ferror_file_func; + pzlib_filefunc_def->opaque = NULL; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/ioapi.h b/src/SDL2/external/zlib-1.2.8/contrib/minizip/ioapi.h new file mode 100644 index 000000000..8dcbdb06e --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/ioapi.h @@ -0,0 +1,208 @@ +/* ioapi.h -- IO base function header for compress/uncompress .zip + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + + Changes + + Oct-2009 - Defined ZPOS64_T to fpos_t on windows and u_int64_t on linux. (might need to find a better why for this) + Oct-2009 - Change to fseeko64, ftello64 and fopen64 so large files would work on linux. + More if/def section may be needed to support other platforms + Oct-2009 - Defined fxxxx64 calls to normal fopen/ftell/fseek so they would compile on windows. + (but you should use iowin32.c for windows instead) + +*/ + +#ifndef _ZLIBIOAPI64_H +#define _ZLIBIOAPI64_H + +#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__)) + + // Linux needs this to support file operation on files larger then 4+GB + // But might need better if/def to select just the platforms that needs them. + + #ifndef __USE_FILE_OFFSET64 + #define __USE_FILE_OFFSET64 + #endif + #ifndef __USE_LARGEFILE64 + #define __USE_LARGEFILE64 + #endif + #ifndef _LARGEFILE64_SOURCE + #define _LARGEFILE64_SOURCE + #endif + #ifndef _FILE_OFFSET_BIT + #define _FILE_OFFSET_BIT 64 + #endif + +#endif + +#include +#include +#include "zlib.h" + +#if defined(USE_FILE32API) +#define fopen64 fopen +#define ftello64 ftell +#define fseeko64 fseek +#else +#ifdef __FreeBSD__ +#define fopen64 fopen +#define ftello64 ftello +#define fseeko64 fseeko +#endif +#ifdef _MSC_VER + #define fopen64 fopen + #if (_MSC_VER >= 1400) && (!(defined(NO_MSCVER_FILE64_FUNC))) + #define ftello64 _ftelli64 + #define fseeko64 _fseeki64 + #else // old MSC + #define ftello64 ftell + #define fseeko64 fseek + #endif +#endif +#endif + +/* +#ifndef ZPOS64_T + #ifdef _WIN32 + #define ZPOS64_T fpos_t + #else + #include + #define ZPOS64_T uint64_t + #endif +#endif +*/ + +#ifdef HAVE_MINIZIP64_CONF_H +#include "mz64conf.h" +#endif + +/* a type choosen by DEFINE */ +#ifdef HAVE_64BIT_INT_CUSTOM +typedef 64BIT_INT_CUSTOM_TYPE ZPOS64_T; +#else +#ifdef HAS_STDINT_H +#include "stdint.h" +typedef uint64_t ZPOS64_T; +#else + +/* Maximum unsigned 32-bit value used as placeholder for zip64 */ +#define MAXU32 0xffffffff + +#if defined(_MSC_VER) || defined(__BORLANDC__) +typedef unsigned __int64 ZPOS64_T; +#else +typedef unsigned long long int ZPOS64_T; +#endif +#endif +#endif + + + +#ifdef __cplusplus +extern "C" { +#endif + + +#define ZLIB_FILEFUNC_SEEK_CUR (1) +#define ZLIB_FILEFUNC_SEEK_END (2) +#define ZLIB_FILEFUNC_SEEK_SET (0) + +#define ZLIB_FILEFUNC_MODE_READ (1) +#define ZLIB_FILEFUNC_MODE_WRITE (2) +#define ZLIB_FILEFUNC_MODE_READWRITEFILTER (3) + +#define ZLIB_FILEFUNC_MODE_EXISTING (4) +#define ZLIB_FILEFUNC_MODE_CREATE (8) + + +#ifndef ZCALLBACK + #if (defined(WIN32) || defined(_WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK) + #define ZCALLBACK CALLBACK + #else + #define ZCALLBACK + #endif +#endif + + + + +typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const char* filename, int mode)); +typedef uLong (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size)); +typedef uLong (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size)); +typedef int (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream)); +typedef int (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream)); + +typedef long (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream)); +typedef long (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin)); + + +/* here is the "old" 32 bits structure structure */ +typedef struct zlib_filefunc_def_s +{ + open_file_func zopen_file; + read_file_func zread_file; + write_file_func zwrite_file; + tell_file_func ztell_file; + seek_file_func zseek_file; + close_file_func zclose_file; + testerror_file_func zerror_file; + voidpf opaque; +} zlib_filefunc_def; + +typedef ZPOS64_T (ZCALLBACK *tell64_file_func) OF((voidpf opaque, voidpf stream)); +typedef long (ZCALLBACK *seek64_file_func) OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin)); +typedef voidpf (ZCALLBACK *open64_file_func) OF((voidpf opaque, const void* filename, int mode)); + +typedef struct zlib_filefunc64_def_s +{ + open64_file_func zopen64_file; + read_file_func zread_file; + write_file_func zwrite_file; + tell64_file_func ztell64_file; + seek64_file_func zseek64_file; + close_file_func zclose_file; + testerror_file_func zerror_file; + voidpf opaque; +} zlib_filefunc64_def; + +void fill_fopen64_filefunc OF((zlib_filefunc64_def* pzlib_filefunc_def)); +void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def)); + +/* now internal definition, only for zip.c and unzip.h */ +typedef struct zlib_filefunc64_32_def_s +{ + zlib_filefunc64_def zfile_func64; + open_file_func zopen32_file; + tell_file_func ztell32_file; + seek_file_func zseek32_file; +} zlib_filefunc64_32_def; + + +#define ZREAD64(filefunc,filestream,buf,size) ((*((filefunc).zfile_func64.zread_file)) ((filefunc).zfile_func64.opaque,filestream,buf,size)) +#define ZWRITE64(filefunc,filestream,buf,size) ((*((filefunc).zfile_func64.zwrite_file)) ((filefunc).zfile_func64.opaque,filestream,buf,size)) +//#define ZTELL64(filefunc,filestream) ((*((filefunc).ztell64_file)) ((filefunc).opaque,filestream)) +//#define ZSEEK64(filefunc,filestream,pos,mode) ((*((filefunc).zseek64_file)) ((filefunc).opaque,filestream,pos,mode)) +#define ZCLOSE64(filefunc,filestream) ((*((filefunc).zfile_func64.zclose_file)) ((filefunc).zfile_func64.opaque,filestream)) +#define ZERROR64(filefunc,filestream) ((*((filefunc).zfile_func64.zerror_file)) ((filefunc).zfile_func64.opaque,filestream)) + +voidpf call_zopen64 OF((const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)); +long call_zseek64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin)); +ZPOS64_T call_ztell64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream)); + +void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32); + +#define ZOPEN64(filefunc,filename,mode) (call_zopen64((&(filefunc)),(filename),(mode))) +#define ZTELL64(filefunc,filestream) (call_ztell64((&(filefunc)),(filestream))) +#define ZSEEK64(filefunc,filestream,pos,mode) (call_zseek64((&(filefunc)),(filestream),(pos),(mode))) + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/iowin32.c b/src/SDL2/external/zlib-1.2.8/contrib/minizip/iowin32.c new file mode 100644 index 000000000..a46d96c7f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/iowin32.c @@ -0,0 +1,461 @@ +/* iowin32.c -- IO base function header for compress/uncompress .zip + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + +*/ + +#include + +#include "zlib.h" +#include "ioapi.h" +#include "iowin32.h" + +#ifndef INVALID_HANDLE_VALUE +#define INVALID_HANDLE_VALUE (0xFFFFFFFF) +#endif + +#ifndef INVALID_SET_FILE_POINTER +#define INVALID_SET_FILE_POINTER ((DWORD)-1) +#endif + + +#if defined(WINAPI_FAMILY_PARTITION) && (!(defined(IOWIN32_USING_WINRT_API))) +#if WINAPI_FAMILY_PARTITION(WINAPI_PARTITION_APP) +#define IOWIN32_USING_WINRT_API 1 +#endif +#endif + +voidpf ZCALLBACK win32_open_file_func OF((voidpf opaque, const char* filename, int mode)); +uLong ZCALLBACK win32_read_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size)); +uLong ZCALLBACK win32_write_file_func OF((voidpf opaque, voidpf stream, const void* buf, uLong size)); +ZPOS64_T ZCALLBACK win32_tell64_file_func OF((voidpf opaque, voidpf stream)); +long ZCALLBACK win32_seek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin)); +int ZCALLBACK win32_close_file_func OF((voidpf opaque, voidpf stream)); +int ZCALLBACK win32_error_file_func OF((voidpf opaque, voidpf stream)); + +typedef struct +{ + HANDLE hf; + int error; +} WIN32FILE_IOWIN; + + +static void win32_translate_open_mode(int mode, + DWORD* lpdwDesiredAccess, + DWORD* lpdwCreationDisposition, + DWORD* lpdwShareMode, + DWORD* lpdwFlagsAndAttributes) +{ + *lpdwDesiredAccess = *lpdwShareMode = *lpdwFlagsAndAttributes = *lpdwCreationDisposition = 0; + + if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ) + { + *lpdwDesiredAccess = GENERIC_READ; + *lpdwCreationDisposition = OPEN_EXISTING; + *lpdwShareMode = FILE_SHARE_READ; + } + else if (mode & ZLIB_FILEFUNC_MODE_EXISTING) + { + *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ; + *lpdwCreationDisposition = OPEN_EXISTING; + } + else if (mode & ZLIB_FILEFUNC_MODE_CREATE) + { + *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ; + *lpdwCreationDisposition = CREATE_ALWAYS; + } +} + +static voidpf win32_build_iowin(HANDLE hFile) +{ + voidpf ret=NULL; + + if ((hFile != NULL) && (hFile != INVALID_HANDLE_VALUE)) + { + WIN32FILE_IOWIN w32fiow; + w32fiow.hf = hFile; + w32fiow.error = 0; + ret = malloc(sizeof(WIN32FILE_IOWIN)); + + if (ret==NULL) + CloseHandle(hFile); + else + *((WIN32FILE_IOWIN*)ret) = w32fiow; + } + return ret; +} + +voidpf ZCALLBACK win32_open64_file_func (voidpf opaque,const void* filename,int mode) +{ + const char* mode_fopen = NULL; + DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ; + HANDLE hFile = NULL; + + win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes); + +#ifdef IOWIN32_USING_WINRT_API +#ifdef UNICODE + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFile2((LPCTSTR)filename, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL); +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + { + WCHAR filenameW[FILENAME_MAX + 0x200 + 1]; + MultiByteToWideChar(CP_ACP,0,(const char*)filename,-1,filenameW,FILENAME_MAX + 0x200); + hFile = CreateFile2(filenameW, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL); + } +#endif +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL); +#endif + + return win32_build_iowin(hFile); +} + + +voidpf ZCALLBACK win32_open64_file_funcA (voidpf opaque,const void* filename,int mode) +{ + const char* mode_fopen = NULL; + DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ; + HANDLE hFile = NULL; + + win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes); + +#ifdef IOWIN32_USING_WINRT_API + if ((filename!=NULL) && (dwDesiredAccess != 0)) + { + WCHAR filenameW[FILENAME_MAX + 0x200 + 1]; + MultiByteToWideChar(CP_ACP,0,(const char*)filename,-1,filenameW,FILENAME_MAX + 0x200); + hFile = CreateFile2(filenameW, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL); + } +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFileA((LPCSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL); +#endif + + return win32_build_iowin(hFile); +} + + +voidpf ZCALLBACK win32_open64_file_funcW (voidpf opaque,const void* filename,int mode) +{ + const char* mode_fopen = NULL; + DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ; + HANDLE hFile = NULL; + + win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes); + +#ifdef IOWIN32_USING_WINRT_API + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFile2((LPCWSTR)filename, dwDesiredAccess, dwShareMode, dwCreationDisposition,NULL); +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFileW((LPCWSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL); +#endif + + return win32_build_iowin(hFile); +} + + +voidpf ZCALLBACK win32_open_file_func (voidpf opaque,const char* filename,int mode) +{ + const char* mode_fopen = NULL; + DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ; + HANDLE hFile = NULL; + + win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes); + +#ifdef IOWIN32_USING_WINRT_API +#ifdef UNICODE + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFile2((LPCTSTR)filename, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL); +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + { + WCHAR filenameW[FILENAME_MAX + 0x200 + 1]; + MultiByteToWideChar(CP_ACP,0,(const char*)filename,-1,filenameW,FILENAME_MAX + 0x200); + hFile = CreateFile2(filenameW, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL); + } +#endif +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL); +#endif + + return win32_build_iowin(hFile); +} + + +uLong ZCALLBACK win32_read_file_func (voidpf opaque, voidpf stream, void* buf,uLong size) +{ + uLong ret=0; + HANDLE hFile = NULL; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + + if (hFile != NULL) + { + if (!ReadFile(hFile, buf, size, &ret, NULL)) + { + DWORD dwErr = GetLastError(); + if (dwErr == ERROR_HANDLE_EOF) + dwErr = 0; + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + } + } + + return ret; +} + + +uLong ZCALLBACK win32_write_file_func (voidpf opaque,voidpf stream,const void* buf,uLong size) +{ + uLong ret=0; + HANDLE hFile = NULL; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + + if (hFile != NULL) + { + if (!WriteFile(hFile, buf, size, &ret, NULL)) + { + DWORD dwErr = GetLastError(); + if (dwErr == ERROR_HANDLE_EOF) + dwErr = 0; + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + } + } + + return ret; +} + +static BOOL MySetFilePointerEx(HANDLE hFile, LARGE_INTEGER pos, LARGE_INTEGER *newPos, DWORD dwMoveMethod) +{ +#ifdef IOWIN32_USING_WINRT_API + return SetFilePointerEx(hFile, pos, newPos, dwMoveMethod); +#else + LONG lHigh = pos.HighPart; + DWORD dwNewPos = SetFilePointer(hFile, pos.LowPart, &lHigh, FILE_CURRENT); + BOOL fOk = TRUE; + if (dwNewPos == 0xFFFFFFFF) + if (GetLastError() != NO_ERROR) + fOk = FALSE; + if ((newPos != NULL) && (fOk)) + { + newPos->LowPart = dwNewPos; + newPos->HighPart = lHigh; + } + return fOk; +#endif +} + +long ZCALLBACK win32_tell_file_func (voidpf opaque,voidpf stream) +{ + long ret=-1; + HANDLE hFile = NULL; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + if (hFile != NULL) + { + LARGE_INTEGER pos; + pos.QuadPart = 0; + + if (!MySetFilePointerEx(hFile, pos, &pos, FILE_CURRENT)) + { + DWORD dwErr = GetLastError(); + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + ret = -1; + } + else + ret=(long)pos.LowPart; + } + return ret; +} + +ZPOS64_T ZCALLBACK win32_tell64_file_func (voidpf opaque, voidpf stream) +{ + ZPOS64_T ret= (ZPOS64_T)-1; + HANDLE hFile = NULL; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream)->hf; + + if (hFile) + { + LARGE_INTEGER pos; + pos.QuadPart = 0; + + if (!MySetFilePointerEx(hFile, pos, &pos, FILE_CURRENT)) + { + DWORD dwErr = GetLastError(); + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + ret = (ZPOS64_T)-1; + } + else + ret=pos.QuadPart; + } + return ret; +} + + +long ZCALLBACK win32_seek_file_func (voidpf opaque,voidpf stream,uLong offset,int origin) +{ + DWORD dwMoveMethod=0xFFFFFFFF; + HANDLE hFile = NULL; + + long ret=-1; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + switch (origin) + { + case ZLIB_FILEFUNC_SEEK_CUR : + dwMoveMethod = FILE_CURRENT; + break; + case ZLIB_FILEFUNC_SEEK_END : + dwMoveMethod = FILE_END; + break; + case ZLIB_FILEFUNC_SEEK_SET : + dwMoveMethod = FILE_BEGIN; + break; + default: return -1; + } + + if (hFile != NULL) + { + LARGE_INTEGER pos; + pos.QuadPart = offset; + if (!MySetFilePointerEx(hFile, pos, NULL, dwMoveMethod)) + { + DWORD dwErr = GetLastError(); + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + ret = -1; + } + else + ret=0; + } + return ret; +} + +long ZCALLBACK win32_seek64_file_func (voidpf opaque, voidpf stream,ZPOS64_T offset,int origin) +{ + DWORD dwMoveMethod=0xFFFFFFFF; + HANDLE hFile = NULL; + long ret=-1; + + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream)->hf; + + switch (origin) + { + case ZLIB_FILEFUNC_SEEK_CUR : + dwMoveMethod = FILE_CURRENT; + break; + case ZLIB_FILEFUNC_SEEK_END : + dwMoveMethod = FILE_END; + break; + case ZLIB_FILEFUNC_SEEK_SET : + dwMoveMethod = FILE_BEGIN; + break; + default: return -1; + } + + if (hFile) + { + LARGE_INTEGER pos; + pos.QuadPart = offset; + if (!MySetFilePointerEx(hFile, pos, NULL, FILE_CURRENT)) + { + DWORD dwErr = GetLastError(); + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + ret = -1; + } + else + ret=0; + } + return ret; +} + +int ZCALLBACK win32_close_file_func (voidpf opaque, voidpf stream) +{ + int ret=-1; + + if (stream!=NULL) + { + HANDLE hFile; + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + if (hFile != NULL) + { + CloseHandle(hFile); + ret=0; + } + free(stream); + } + return ret; +} + +int ZCALLBACK win32_error_file_func (voidpf opaque,voidpf stream) +{ + int ret=-1; + if (stream!=NULL) + { + ret = ((WIN32FILE_IOWIN*)stream) -> error; + } + return ret; +} + +void fill_win32_filefunc (zlib_filefunc_def* pzlib_filefunc_def) +{ + pzlib_filefunc_def->zopen_file = win32_open_file_func; + pzlib_filefunc_def->zread_file = win32_read_file_func; + pzlib_filefunc_def->zwrite_file = win32_write_file_func; + pzlib_filefunc_def->ztell_file = win32_tell_file_func; + pzlib_filefunc_def->zseek_file = win32_seek_file_func; + pzlib_filefunc_def->zclose_file = win32_close_file_func; + pzlib_filefunc_def->zerror_file = win32_error_file_func; + pzlib_filefunc_def->opaque = NULL; +} + +void fill_win32_filefunc64(zlib_filefunc64_def* pzlib_filefunc_def) +{ + pzlib_filefunc_def->zopen64_file = win32_open64_file_func; + pzlib_filefunc_def->zread_file = win32_read_file_func; + pzlib_filefunc_def->zwrite_file = win32_write_file_func; + pzlib_filefunc_def->ztell64_file = win32_tell64_file_func; + pzlib_filefunc_def->zseek64_file = win32_seek64_file_func; + pzlib_filefunc_def->zclose_file = win32_close_file_func; + pzlib_filefunc_def->zerror_file = win32_error_file_func; + pzlib_filefunc_def->opaque = NULL; +} + + +void fill_win32_filefunc64A(zlib_filefunc64_def* pzlib_filefunc_def) +{ + pzlib_filefunc_def->zopen64_file = win32_open64_file_funcA; + pzlib_filefunc_def->zread_file = win32_read_file_func; + pzlib_filefunc_def->zwrite_file = win32_write_file_func; + pzlib_filefunc_def->ztell64_file = win32_tell64_file_func; + pzlib_filefunc_def->zseek64_file = win32_seek64_file_func; + pzlib_filefunc_def->zclose_file = win32_close_file_func; + pzlib_filefunc_def->zerror_file = win32_error_file_func; + pzlib_filefunc_def->opaque = NULL; +} + + +void fill_win32_filefunc64W(zlib_filefunc64_def* pzlib_filefunc_def) +{ + pzlib_filefunc_def->zopen64_file = win32_open64_file_funcW; + pzlib_filefunc_def->zread_file = win32_read_file_func; + pzlib_filefunc_def->zwrite_file = win32_write_file_func; + pzlib_filefunc_def->ztell64_file = win32_tell64_file_func; + pzlib_filefunc_def->zseek64_file = win32_seek64_file_func; + pzlib_filefunc_def->zclose_file = win32_close_file_func; + pzlib_filefunc_def->zerror_file = win32_error_file_func; + pzlib_filefunc_def->opaque = NULL; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/iowin32.h b/src/SDL2/external/zlib-1.2.8/contrib/minizip/iowin32.h new file mode 100644 index 000000000..0ca0969a7 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/iowin32.h @@ -0,0 +1,28 @@ +/* iowin32.h -- IO base function header for compress/uncompress .zip + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + +*/ + +#include + + +#ifdef __cplusplus +extern "C" { +#endif + +void fill_win32_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def)); +void fill_win32_filefunc64 OF((zlib_filefunc64_def* pzlib_filefunc_def)); +void fill_win32_filefunc64A OF((zlib_filefunc64_def* pzlib_filefunc_def)); +void fill_win32_filefunc64W OF((zlib_filefunc64_def* pzlib_filefunc_def)); + +#ifdef __cplusplus +} +#endif diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/make_vms.com b/src/SDL2/external/zlib-1.2.8/contrib/minizip/make_vms.com new file mode 100644 index 000000000..9ac13a98f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/make_vms.com @@ -0,0 +1,25 @@ +$ if f$search("ioapi.h_orig") .eqs. "" then copy ioapi.h ioapi.h_orig +$ open/write zdef vmsdefs.h +$ copy sys$input: zdef +$ deck +#define unix +#define fill_zlib_filefunc64_32_def_from_filefunc32 fillzffunc64from +#define Write_Zip64EndOfCentralDirectoryLocator Write_Zip64EoDLocator +#define Write_Zip64EndOfCentralDirectoryRecord Write_Zip64EoDRecord +#define Write_EndOfCentralDirectoryRecord Write_EoDRecord +$ eod +$ close zdef +$ copy vmsdefs.h,ioapi.h_orig ioapi.h +$ cc/include=[--]/prefix=all ioapi.c +$ cc/include=[--]/prefix=all miniunz.c +$ cc/include=[--]/prefix=all unzip.c +$ cc/include=[--]/prefix=all minizip.c +$ cc/include=[--]/prefix=all zip.c +$ link miniunz,unzip,ioapi,[--]libz.olb/lib +$ link minizip,zip,ioapi,[--]libz.olb/lib +$ mcr []minizip test minizip_info.txt +$ mcr []miniunz -l test.zip +$ rename minizip_info.txt; minizip_info.txt_old +$ mcr []miniunz test.zip +$ delete test.zip;* +$exit diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/miniunz.c b/src/SDL2/external/zlib-1.2.8/contrib/minizip/miniunz.c new file mode 100644 index 000000000..3d65401be --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/miniunz.c @@ -0,0 +1,660 @@ +/* + miniunz.c + Version 1.1, February 14h, 2010 + sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications of Unzip for Zip64 + Copyright (C) 2007-2008 Even Rouault + + Modifications for Zip64 support on both zip and unzip + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) +*/ + +#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__)) + #ifndef __USE_FILE_OFFSET64 + #define __USE_FILE_OFFSET64 + #endif + #ifndef __USE_LARGEFILE64 + #define __USE_LARGEFILE64 + #endif + #ifndef _LARGEFILE64_SOURCE + #define _LARGEFILE64_SOURCE + #endif + #ifndef _FILE_OFFSET_BIT + #define _FILE_OFFSET_BIT 64 + #endif +#endif + +#ifdef __APPLE__ +// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions +#define FOPEN_FUNC(filename, mode) fopen(filename, mode) +#define FTELLO_FUNC(stream) ftello(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin) +#else +#define FOPEN_FUNC(filename, mode) fopen64(filename, mode) +#define FTELLO_FUNC(stream) ftello64(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin) +#endif + + +#include +#include +#include +#include +#include +#include + +#ifdef _WIN32 +# include +# include +#else +# include +# include +#endif + + +#include "unzip.h" + +#define CASESENSITIVITY (0) +#define WRITEBUFFERSIZE (8192) +#define MAXFILENAME (256) + +#ifdef _WIN32 +#define USEWIN32IOAPI +#include "iowin32.h" +#endif +/* + mini unzip, demo of unzip package + + usage : + Usage : miniunz [-exvlo] file.zip [file_to_extract] [-d extractdir] + + list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT + if it exists +*/ + + +/* change_file_date : change the date/time of a file + filename : the filename of the file where date/time must be modified + dosdate : the new date at the MSDos format (4 bytes) + tmu_date : the SAME new date at the tm_unz format */ +void change_file_date(filename,dosdate,tmu_date) + const char *filename; + uLong dosdate; + tm_unz tmu_date; +{ +#ifdef _WIN32 + HANDLE hFile; + FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite; + + hFile = CreateFileA(filename,GENERIC_READ | GENERIC_WRITE, + 0,NULL,OPEN_EXISTING,0,NULL); + GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite); + DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal); + LocalFileTimeToFileTime(&ftLocal,&ftm); + SetFileTime(hFile,&ftm,&ftLastAcc,&ftm); + CloseHandle(hFile); +#else +#ifdef unix || __APPLE__ + struct utimbuf ut; + struct tm newdate; + newdate.tm_sec = tmu_date.tm_sec; + newdate.tm_min=tmu_date.tm_min; + newdate.tm_hour=tmu_date.tm_hour; + newdate.tm_mday=tmu_date.tm_mday; + newdate.tm_mon=tmu_date.tm_mon; + if (tmu_date.tm_year > 1900) + newdate.tm_year=tmu_date.tm_year - 1900; + else + newdate.tm_year=tmu_date.tm_year ; + newdate.tm_isdst=-1; + + ut.actime=ut.modtime=mktime(&newdate); + utime(filename,&ut); +#endif +#endif +} + + +/* mymkdir and change_file_date are not 100 % portable + As I don't know well Unix, I wait feedback for the unix portion */ + +int mymkdir(dirname) + const char* dirname; +{ + int ret=0; +#ifdef _WIN32 + ret = _mkdir(dirname); +#elif unix + ret = mkdir (dirname,0775); +#elif __APPLE__ + ret = mkdir (dirname,0775); +#endif + return ret; +} + +int makedir (newdir) + char *newdir; +{ + char *buffer ; + char *p; + int len = (int)strlen(newdir); + + if (len <= 0) + return 0; + + buffer = (char*)malloc(len+1); + if (buffer==NULL) + { + printf("Error allocating memory\n"); + return UNZ_INTERNALERROR; + } + strcpy(buffer,newdir); + + if (buffer[len-1] == '/') { + buffer[len-1] = '\0'; + } + if (mymkdir(buffer) == 0) + { + free(buffer); + return 1; + } + + p = buffer+1; + while (1) + { + char hold; + + while(*p && *p != '\\' && *p != '/') + p++; + hold = *p; + *p = 0; + if ((mymkdir(buffer) == -1) && (errno == ENOENT)) + { + printf("couldn't create directory %s\n",buffer); + free(buffer); + return 0; + } + if (hold == 0) + break; + *p++ = hold; + } + free(buffer); + return 1; +} + +void do_banner() +{ + printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n"); + printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n"); +} + +void do_help() +{ + printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \ + " -e Extract without pathname (junk paths)\n" \ + " -x Extract with pathname\n" \ + " -v list files\n" \ + " -l list files\n" \ + " -d directory to extract into\n" \ + " -o overwrite files without prompting\n" \ + " -p extract crypted file using password\n\n"); +} + +void Display64BitsSize(ZPOS64_T n, int size_char) +{ + /* to avoid compatibility problem , we do here the conversion */ + char number[21]; + int offset=19; + int pos_string = 19; + number[20]=0; + for (;;) { + number[offset]=(char)((n%10)+'0'); + if (number[offset] != '0') + pos_string=offset; + n/=10; + if (offset==0) + break; + offset--; + } + { + int size_display_string = 19-pos_string; + while (size_char > size_display_string) + { + size_char--; + printf(" "); + } + } + + printf("%s",&number[pos_string]); +} + +int do_list(uf) + unzFile uf; +{ + uLong i; + unz_global_info64 gi; + int err; + + err = unzGetGlobalInfo64(uf,&gi); + if (err!=UNZ_OK) + printf("error %d with zipfile in unzGetGlobalInfo \n",err); + printf(" Length Method Size Ratio Date Time CRC-32 Name\n"); + printf(" ------ ------ ---- ----- ---- ---- ------ ----\n"); + for (i=0;i0) + ratio = (uLong)((file_info.compressed_size*100)/file_info.uncompressed_size); + + /* display a '*' if the file is crypted */ + if ((file_info.flag & 1) != 0) + charCrypt='*'; + + if (file_info.compression_method==0) + string_method="Stored"; + else + if (file_info.compression_method==Z_DEFLATED) + { + uInt iLevel=(uInt)((file_info.flag & 0x6)/2); + if (iLevel==0) + string_method="Defl:N"; + else if (iLevel==1) + string_method="Defl:X"; + else if ((iLevel==2) || (iLevel==3)) + string_method="Defl:F"; /* 2:fast , 3 : extra fast*/ + } + else + if (file_info.compression_method==Z_BZIP2ED) + { + string_method="BZip2 "; + } + else + string_method="Unkn. "; + + Display64BitsSize(file_info.uncompressed_size,7); + printf(" %6s%c",string_method,charCrypt); + Display64BitsSize(file_info.compressed_size,7); + printf(" %3lu%% %2.2lu-%2.2lu-%2.2lu %2.2lu:%2.2lu %8.8lx %s\n", + ratio, + (uLong)file_info.tmu_date.tm_mon + 1, + (uLong)file_info.tmu_date.tm_mday, + (uLong)file_info.tmu_date.tm_year % 100, + (uLong)file_info.tmu_date.tm_hour,(uLong)file_info.tmu_date.tm_min, + (uLong)file_info.crc,filename_inzip); + if ((i+1)='a') && (rep<='z')) + rep -= 0x20; + } + while ((rep!='Y') && (rep!='N') && (rep!='A')); + } + + if (rep == 'N') + skip = 1; + + if (rep == 'A') + *popt_overwrite=1; + } + + if ((skip==0) && (err==UNZ_OK)) + { + fout=FOPEN_FUNC(write_filename,"wb"); + /* some zipfile don't contain directory alone before file */ + if ((fout==NULL) && ((*popt_extract_without_path)==0) && + (filename_withoutpath!=(char*)filename_inzip)) + { + char c=*(filename_withoutpath-1); + *(filename_withoutpath-1)='\0'; + makedir(write_filename); + *(filename_withoutpath-1)=c; + fout=FOPEN_FUNC(write_filename,"wb"); + } + + if (fout==NULL) + { + printf("error opening %s\n",write_filename); + } + } + + if (fout!=NULL) + { + printf(" extracting: %s\n",write_filename); + + do + { + err = unzReadCurrentFile(uf,buf,size_buf); + if (err<0) + { + printf("error %d with zipfile in unzReadCurrentFile\n",err); + break; + } + if (err>0) + if (fwrite(buf,err,1,fout)!=1) + { + printf("error in writing extracted file\n"); + err=UNZ_ERRNO; + break; + } + } + while (err>0); + if (fout) + fclose(fout); + + if (err==0) + change_file_date(write_filename,file_info.dosDate, + file_info.tmu_date); + } + + if (err==UNZ_OK) + { + err = unzCloseCurrentFile (uf); + if (err!=UNZ_OK) + { + printf("error %d with zipfile in unzCloseCurrentFile\n",err); + } + } + else + unzCloseCurrentFile(uf); /* don't lose the error */ + } + + free(buf); + return err; +} + + +int do_extract(uf,opt_extract_without_path,opt_overwrite,password) + unzFile uf; + int opt_extract_without_path; + int opt_overwrite; + const char* password; +{ + uLong i; + unz_global_info64 gi; + int err; + FILE* fout=NULL; + + err = unzGetGlobalInfo64(uf,&gi); + if (err!=UNZ_OK) + printf("error %d with zipfile in unzGetGlobalInfo \n",err); + + for (i=0;i insert n+1 empty lines +.\" for manpage-specific macros, see man(7) +.SH NAME +miniunzip - uncompress and examine ZIP archives +.SH SYNOPSIS +.B miniunzip +.RI [ -exvlo ] +zipfile [ files_to_extract ] [-d tempdir] +.SH DESCRIPTION +.B minizip +is a simple tool which allows the extraction of compressed file +archives in the ZIP format used by the MS-DOS utility PKZIP. It was +written as a demonstration of the +.IR zlib (3) +library and therefore lack many of the features of the +.IR unzip (1) +program. +.SH OPTIONS +A number of options are supported. With the exception of +.BI \-d\ tempdir +these must be supplied before any +other arguments and are: +.TP +.BI \-l\ ,\ \-\-v +List the files in the archive without extracting them. +.TP +.B \-o +Overwrite files without prompting for confirmation. +.TP +.B \-x +Extract files (default). +.PP +The +.I zipfile +argument is the name of the archive to process. The next argument can be used +to specify a single file to extract from the archive. + +Lastly, the following option can be specified at the end of the command-line: +.TP +.BI \-d\ tempdir +Extract the archive in the directory +.I tempdir +rather than the current directory. +.SH SEE ALSO +.BR minizip (1), +.BR zlib (3), +.BR unzip (1). +.SH AUTHOR +This program was written by Gilles Vollant. This manual page was +written by Mark Brown . The -d tempdir option +was added by Dirk Eddelbuettel . diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.1 b/src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.1 new file mode 100644 index 000000000..1154484c1 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.1 @@ -0,0 +1,46 @@ +.\" Hey, EMACS: -*- nroff -*- +.TH minizip 1 "May 2, 2001" +.\" Please adjust this date whenever revising the manpage. +.\" +.\" Some roff macros, for reference: +.\" .nh disable hyphenation +.\" .hy enable hyphenation +.\" .ad l left justify +.\" .ad b justify to both left and right margins +.\" .nf disable filling +.\" .fi enable filling +.\" .br insert line break +.\" .sp insert n+1 empty lines +.\" for manpage-specific macros, see man(7) +.SH NAME +minizip - create ZIP archives +.SH SYNOPSIS +.B minizip +.RI [ -o ] +zipfile [ " files" ... ] +.SH DESCRIPTION +.B minizip +is a simple tool which allows the creation of compressed file archives +in the ZIP format used by the MS-DOS utility PKZIP. It was written as +a demonstration of the +.IR zlib (3) +library and therefore lack many of the features of the +.IR zip (1) +program. +.SH OPTIONS +The first argument supplied is the name of the ZIP archive to create or +.RI -o +in which case it is ignored and the second argument treated as the +name of the ZIP file. If the ZIP file already exists it will be +overwritten. +.PP +Subsequent arguments specify a list of files to place in the ZIP +archive. If none are specified then an empty archive will be created. +.SH SEE ALSO +.BR miniunzip (1), +.BR zlib (3), +.BR zip (1). +.SH AUTHOR +This program was written by Gilles Vollant. This manual page was +written by Mark Brown . + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.c b/src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.c new file mode 100644 index 000000000..4288962ec --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.c @@ -0,0 +1,520 @@ +/* + minizip.c + Version 1.1, February 14h, 2010 + sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications of Unzip for Zip64 + Copyright (C) 2007-2008 Even Rouault + + Modifications for Zip64 support on both zip and unzip + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) +*/ + + +#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__)) + #ifndef __USE_FILE_OFFSET64 + #define __USE_FILE_OFFSET64 + #endif + #ifndef __USE_LARGEFILE64 + #define __USE_LARGEFILE64 + #endif + #ifndef _LARGEFILE64_SOURCE + #define _LARGEFILE64_SOURCE + #endif + #ifndef _FILE_OFFSET_BIT + #define _FILE_OFFSET_BIT 64 + #endif +#endif + +#ifdef __APPLE__ +// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions +#define FOPEN_FUNC(filename, mode) fopen(filename, mode) +#define FTELLO_FUNC(stream) ftello(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin) +#else +#define FOPEN_FUNC(filename, mode) fopen64(filename, mode) +#define FTELLO_FUNC(stream) ftello64(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin) +#endif + + + +#include +#include +#include +#include +#include +#include + +#ifdef _WIN32 +# include +# include +#else +# include +# include +# include +# include +#endif + +#include "zip.h" + +#ifdef _WIN32 + #define USEWIN32IOAPI + #include "iowin32.h" +#endif + + + +#define WRITEBUFFERSIZE (16384) +#define MAXFILENAME (256) + +#ifdef _WIN32 +uLong filetime(f, tmzip, dt) + char *f; /* name of file to get info on */ + tm_zip *tmzip; /* return value: access, modific. and creation times */ + uLong *dt; /* dostime */ +{ + int ret = 0; + { + FILETIME ftLocal; + HANDLE hFind; + WIN32_FIND_DATAA ff32; + + hFind = FindFirstFileA(f,&ff32); + if (hFind != INVALID_HANDLE_VALUE) + { + FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal); + FileTimeToDosDateTime(&ftLocal,((LPWORD)dt)+1,((LPWORD)dt)+0); + FindClose(hFind); + ret = 1; + } + } + return ret; +} +#else +#ifdef unix || __APPLE__ +uLong filetime(f, tmzip, dt) + char *f; /* name of file to get info on */ + tm_zip *tmzip; /* return value: access, modific. and creation times */ + uLong *dt; /* dostime */ +{ + int ret=0; + struct stat s; /* results of stat() */ + struct tm* filedate; + time_t tm_t=0; + + if (strcmp(f,"-")!=0) + { + char name[MAXFILENAME+1]; + int len = strlen(f); + if (len > MAXFILENAME) + len = MAXFILENAME; + + strncpy(name, f,MAXFILENAME-1); + /* strncpy doesnt append the trailing NULL, of the string is too long. */ + name[ MAXFILENAME ] = '\0'; + + if (name[len - 1] == '/') + name[len - 1] = '\0'; + /* not all systems allow stat'ing a file with / appended */ + if (stat(name,&s)==0) + { + tm_t = s.st_mtime; + ret = 1; + } + } + filedate = localtime(&tm_t); + + tmzip->tm_sec = filedate->tm_sec; + tmzip->tm_min = filedate->tm_min; + tmzip->tm_hour = filedate->tm_hour; + tmzip->tm_mday = filedate->tm_mday; + tmzip->tm_mon = filedate->tm_mon ; + tmzip->tm_year = filedate->tm_year; + + return ret; +} +#else +uLong filetime(f, tmzip, dt) + char *f; /* name of file to get info on */ + tm_zip *tmzip; /* return value: access, modific. and creation times */ + uLong *dt; /* dostime */ +{ + return 0; +} +#endif +#endif + + + + +int check_exist_file(filename) + const char* filename; +{ + FILE* ftestexist; + int ret = 1; + ftestexist = FOPEN_FUNC(filename,"rb"); + if (ftestexist==NULL) + ret = 0; + else + fclose(ftestexist); + return ret; +} + +void do_banner() +{ + printf("MiniZip 1.1, demo of zLib + MiniZip64 package, written by Gilles Vollant\n"); + printf("more info on MiniZip at http://www.winimage.com/zLibDll/minizip.html\n\n"); +} + +void do_help() +{ + printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] [-j] file.zip [files_to_add]\n\n" \ + " -o Overwrite existing file.zip\n" \ + " -a Append to existing file.zip\n" \ + " -0 Store only\n" \ + " -1 Compress faster\n" \ + " -9 Compress better\n\n" \ + " -j exclude path. store only the file name.\n\n"); +} + +/* calculate the CRC32 of a file, + because to encrypt a file, we need known the CRC32 of the file before */ +int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigned long* result_crc) +{ + unsigned long calculate_crc=0; + int err=ZIP_OK; + FILE * fin = FOPEN_FUNC(filenameinzip,"rb"); + + unsigned long size_read = 0; + unsigned long total_read = 0; + if (fin==NULL) + { + err = ZIP_ERRNO; + } + + if (err == ZIP_OK) + do + { + err = ZIP_OK; + size_read = (int)fread(buf,1,size_buf,fin); + if (size_read < size_buf) + if (feof(fin)==0) + { + printf("error in reading %s\n",filenameinzip); + err = ZIP_ERRNO; + } + + if (size_read>0) + calculate_crc = crc32(calculate_crc,buf,size_read); + total_read += size_read; + + } while ((err == ZIP_OK) && (size_read>0)); + + if (fin) + fclose(fin); + + *result_crc=calculate_crc; + printf("file %s crc %lx\n", filenameinzip, calculate_crc); + return err; +} + +int isLargeFile(const char* filename) +{ + int largeFile = 0; + ZPOS64_T pos = 0; + FILE* pFile = FOPEN_FUNC(filename, "rb"); + + if(pFile != NULL) + { + int n = FSEEKO_FUNC(pFile, 0, SEEK_END); + pos = FTELLO_FUNC(pFile); + + printf("File : %s is %lld bytes\n", filename, pos); + + if(pos >= 0xffffffff) + largeFile = 1; + + fclose(pFile); + } + + return largeFile; +} + +int main(argc,argv) + int argc; + char *argv[]; +{ + int i; + int opt_overwrite=0; + int opt_compress_level=Z_DEFAULT_COMPRESSION; + int opt_exclude_path=0; + int zipfilenamearg = 0; + char filename_try[MAXFILENAME+16]; + int zipok; + int err=0; + int size_buf=0; + void* buf=NULL; + const char* password=NULL; + + + do_banner(); + if (argc==1) + { + do_help(); + return 0; + } + else + { + for (i=1;i='0') && (c<='9')) + opt_compress_level = c-'0'; + if ((c=='j') || (c=='J')) + opt_exclude_path = 1; + + if (((c=='p') || (c=='P')) && (i+1='a') && (rep<='z')) + rep -= 0x20; + } + while ((rep!='Y') && (rep!='N') && (rep!='A')); + if (rep=='N') + zipok = 0; + if (rep=='A') + opt_overwrite = 2; + } + } + + if (zipok==1) + { + zipFile zf; + int errclose; +# ifdef USEWIN32IOAPI + zlib_filefunc64_def ffunc; + fill_win32_filefunc64A(&ffunc); + zf = zipOpen2_64(filename_try,(opt_overwrite==2) ? 2 : 0,NULL,&ffunc); +# else + zf = zipOpen64(filename_try,(opt_overwrite==2) ? 2 : 0); +# endif + + if (zf == NULL) + { + printf("error opening %s\n",filename_try); + err= ZIP_ERRNO; + } + else + printf("creating %s\n",filename_try); + + for (i=zipfilenamearg+1;(i='0') || (argv[i][1]<='9'))) && + (strlen(argv[i]) == 2))) + { + FILE * fin; + int size_read; + const char* filenameinzip = argv[i]; + const char *savefilenameinzip; + zip_fileinfo zi; + unsigned long crcFile=0; + int zip64 = 0; + + zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour = + zi.tmz_date.tm_mday = zi.tmz_date.tm_mon = zi.tmz_date.tm_year = 0; + zi.dosDate = 0; + zi.internal_fa = 0; + zi.external_fa = 0; + filetime(filenameinzip,&zi.tmz_date,&zi.dosDate); + +/* + err = zipOpenNewFileInZip(zf,filenameinzip,&zi, + NULL,0,NULL,0,NULL / * comment * /, + (opt_compress_level != 0) ? Z_DEFLATED : 0, + opt_compress_level); +*/ + if ((password != NULL) && (err==ZIP_OK)) + err = getFileCrc(filenameinzip,buf,size_buf,&crcFile); + + zip64 = isLargeFile(filenameinzip); + + /* The path name saved, should not include a leading slash. */ + /*if it did, windows/xp and dynazip couldn't read the zip file. */ + savefilenameinzip = filenameinzip; + while( savefilenameinzip[0] == '\\' || savefilenameinzip[0] == '/' ) + { + savefilenameinzip++; + } + + /*should the zip file contain any path at all?*/ + if( opt_exclude_path ) + { + const char *tmpptr; + const char *lastslash = 0; + for( tmpptr = savefilenameinzip; *tmpptr; tmpptr++) + { + if( *tmpptr == '\\' || *tmpptr == '/') + { + lastslash = tmpptr; + } + } + if( lastslash != NULL ) + { + savefilenameinzip = lastslash+1; // base filename follows last slash. + } + } + + /**/ + err = zipOpenNewFileInZip3_64(zf,savefilenameinzip,&zi, + NULL,0,NULL,0,NULL /* comment*/, + (opt_compress_level != 0) ? Z_DEFLATED : 0, + opt_compress_level,0, + /* -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, */ + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + password,crcFile, zip64); + + if (err != ZIP_OK) + printf("error in opening %s in zipfile\n",filenameinzip); + else + { + fin = FOPEN_FUNC(filenameinzip,"rb"); + if (fin==NULL) + { + err=ZIP_ERRNO; + printf("error in opening %s for reading\n",filenameinzip); + } + } + + if (err == ZIP_OK) + do + { + err = ZIP_OK; + size_read = (int)fread(buf,1,size_buf,fin); + if (size_read < size_buf) + if (feof(fin)==0) + { + printf("error in reading %s\n",filenameinzip); + err = ZIP_ERRNO; + } + + if (size_read>0) + { + err = zipWriteInFileInZip (zf,buf,size_read); + if (err<0) + { + printf("error in writing %s in the zipfile\n", + filenameinzip); + } + + } + } while ((err == ZIP_OK) && (size_read>0)); + + if (fin) + fclose(fin); + + if (err<0) + err=ZIP_ERRNO; + else + { + err = zipCloseFileInZip(zf); + if (err!=ZIP_OK) + printf("error in closing %s in the zipfile\n", + filenameinzip); + } + } + } + errclose = zipClose(zf,NULL); + if (errclose != ZIP_OK) + printf("error in closing %s\n",filename_try); + } + else + { + do_help(); + } + + free(buf); + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.pc.in b/src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.pc.in new file mode 100644 index 000000000..69b5b7fdc --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/minizip.pc.in @@ -0,0 +1,12 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@/minizip + +Name: minizip +Description: Minizip zip file manipulation library +Requires: +Version: @PACKAGE_VERSION@ +Libs: -L${libdir} -lminizip +Libs.private: -lz +Cflags: -I${includedir} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/mztools.c b/src/SDL2/external/zlib-1.2.8/contrib/minizip/mztools.c new file mode 100644 index 000000000..96891c2e0 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/mztools.c @@ -0,0 +1,291 @@ +/* + Additional tools for Minizip + Code: Xavier Roche '2004 + License: Same as ZLIB (www.gzip.org) +*/ + +/* Code */ +#include +#include +#include +#include "zlib.h" +#include "unzip.h" + +#define READ_8(adr) ((unsigned char)*(adr)) +#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) ) +#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) ) + +#define WRITE_8(buff, n) do { \ + *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \ +} while(0) +#define WRITE_16(buff, n) do { \ + WRITE_8((unsigned char*)(buff), n); \ + WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \ +} while(0) +#define WRITE_32(buff, n) do { \ + WRITE_16((unsigned char*)(buff), (n) & 0xffff); \ + WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \ +} while(0) + +extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered) +const char* file; +const char* fileOut; +const char* fileOutTmp; +uLong* nRecovered; +uLong* bytesRecovered; +{ + int err = Z_OK; + FILE* fpZip = fopen(file, "rb"); + FILE* fpOut = fopen(fileOut, "wb"); + FILE* fpOutCD = fopen(fileOutTmp, "wb"); + if (fpZip != NULL && fpOut != NULL) { + int entries = 0; + uLong totalBytes = 0; + char header[30]; + char filename[1024]; + char extra[1024]; + int offset = 0; + int offsetCD = 0; + while ( fread(header, 1, 30, fpZip) == 30 ) { + int currentOffset = offset; + + /* File entry */ + if (READ_32(header) == 0x04034b50) { + unsigned int version = READ_16(header + 4); + unsigned int gpflag = READ_16(header + 6); + unsigned int method = READ_16(header + 8); + unsigned int filetime = READ_16(header + 10); + unsigned int filedate = READ_16(header + 12); + unsigned int crc = READ_32(header + 14); /* crc */ + unsigned int cpsize = READ_32(header + 18); /* compressed size */ + unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */ + unsigned int fnsize = READ_16(header + 26); /* file name length */ + unsigned int extsize = READ_16(header + 28); /* extra field length */ + filename[0] = extra[0] = '\0'; + + /* Header */ + if (fwrite(header, 1, 30, fpOut) == 30) { + offset += 30; + } else { + err = Z_ERRNO; + break; + } + + /* Filename */ + if (fnsize > 0) { + if (fnsize < sizeof(filename)) { + if (fread(filename, 1, fnsize, fpZip) == fnsize) { + if (fwrite(filename, 1, fnsize, fpOut) == fnsize) { + offset += fnsize; + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_STREAM_ERROR; + break; + } + + /* Extra field */ + if (extsize > 0) { + if (extsize < sizeof(extra)) { + if (fread(extra, 1, extsize, fpZip) == extsize) { + if (fwrite(extra, 1, extsize, fpOut) == extsize) { + offset += extsize; + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_ERRNO; + break; + } + } + + /* Data */ + { + int dataSize = cpsize; + if (dataSize == 0) { + dataSize = uncpsize; + } + if (dataSize > 0) { + char* data = malloc(dataSize); + if (data != NULL) { + if ((int)fread(data, 1, dataSize, fpZip) == dataSize) { + if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) { + offset += dataSize; + totalBytes += dataSize; + } else { + err = Z_ERRNO; + } + } else { + err = Z_ERRNO; + } + free(data); + if (err != Z_OK) { + break; + } + } else { + err = Z_MEM_ERROR; + break; + } + } + } + + /* Central directory entry */ + { + char header[46]; + char* comment = ""; + int comsize = (int) strlen(comment); + WRITE_32(header, 0x02014b50); + WRITE_16(header + 4, version); + WRITE_16(header + 6, version); + WRITE_16(header + 8, gpflag); + WRITE_16(header + 10, method); + WRITE_16(header + 12, filetime); + WRITE_16(header + 14, filedate); + WRITE_32(header + 16, crc); + WRITE_32(header + 20, cpsize); + WRITE_32(header + 24, uncpsize); + WRITE_16(header + 28, fnsize); + WRITE_16(header + 30, extsize); + WRITE_16(header + 32, comsize); + WRITE_16(header + 34, 0); /* disk # */ + WRITE_16(header + 36, 0); /* int attrb */ + WRITE_32(header + 38, 0); /* ext attrb */ + WRITE_32(header + 42, currentOffset); + /* Header */ + if (fwrite(header, 1, 46, fpOutCD) == 46) { + offsetCD += 46; + + /* Filename */ + if (fnsize > 0) { + if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) { + offsetCD += fnsize; + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_STREAM_ERROR; + break; + } + + /* Extra field */ + if (extsize > 0) { + if (fwrite(extra, 1, extsize, fpOutCD) == extsize) { + offsetCD += extsize; + } else { + err = Z_ERRNO; + break; + } + } + + /* Comment field */ + if (comsize > 0) { + if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) { + offsetCD += comsize; + } else { + err = Z_ERRNO; + break; + } + } + + + } else { + err = Z_ERRNO; + break; + } + } + + /* Success */ + entries++; + + } else { + break; + } + } + + /* Final central directory */ + { + int entriesZip = entries; + char header[22]; + char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools"; + int comsize = (int) strlen(comment); + if (entriesZip > 0xffff) { + entriesZip = 0xffff; + } + WRITE_32(header, 0x06054b50); + WRITE_16(header + 4, 0); /* disk # */ + WRITE_16(header + 6, 0); /* disk # */ + WRITE_16(header + 8, entriesZip); /* hack */ + WRITE_16(header + 10, entriesZip); /* hack */ + WRITE_32(header + 12, offsetCD); /* size of CD */ + WRITE_32(header + 16, offset); /* offset to CD */ + WRITE_16(header + 20, comsize); /* comment */ + + /* Header */ + if (fwrite(header, 1, 22, fpOutCD) == 22) { + + /* Comment field */ + if (comsize > 0) { + if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) { + err = Z_ERRNO; + } + } + + } else { + err = Z_ERRNO; + } + } + + /* Final merge (file + central directory) */ + fclose(fpOutCD); + if (err == Z_OK) { + fpOutCD = fopen(fileOutTmp, "rb"); + if (fpOutCD != NULL) { + int nRead; + char buffer[8192]; + while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) { + if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) { + err = Z_ERRNO; + break; + } + } + fclose(fpOutCD); + } + } + + /* Close */ + fclose(fpZip); + fclose(fpOut); + + /* Wipe temporary file */ + (void)remove(fileOutTmp); + + /* Number of recovered entries */ + if (err == Z_OK) { + if (nRecovered != NULL) { + *nRecovered = entries; + } + if (bytesRecovered != NULL) { + *bytesRecovered = totalBytes; + } + } + } else { + err = Z_STREAM_ERROR; + } + return err; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/mztools.h b/src/SDL2/external/zlib-1.2.8/contrib/minizip/mztools.h new file mode 100644 index 000000000..a49a426ec --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/mztools.h @@ -0,0 +1,37 @@ +/* + Additional tools for Minizip + Code: Xavier Roche '2004 + License: Same as ZLIB (www.gzip.org) +*/ + +#ifndef _zip_tools_H +#define _zip_tools_H + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef _ZLIB_H +#include "zlib.h" +#endif + +#include "unzip.h" + +/* Repair a ZIP file (missing central directory) + file: file to recover + fileOut: output file after recovery + fileOutTmp: temporary file name used for recovery +*/ +extern int ZEXPORT unzRepair(const char* file, + const char* fileOut, + const char* fileOutTmp, + uLong* nRecovered, + uLong* bytesRecovered); + + +#ifdef __cplusplus +} +#endif + + +#endif diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/unzip.c b/src/SDL2/external/zlib-1.2.8/contrib/minizip/unzip.c new file mode 100644 index 000000000..909350435 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/unzip.c @@ -0,0 +1,2125 @@ +/* unzip.c -- IO for uncompress .zip files using zlib + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications of Unzip for Zip64 + Copyright (C) 2007-2008 Even Rouault + + Modifications for Zip64 support on both zip and unzip + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + + + ------------------------------------------------------------------------------------ + Decryption code comes from crypt.c by Info-ZIP but has been greatly reduced in terms of + compatibility with older software. The following is from the original crypt.c. + Code woven in by Terry Thorsen 1/2003. + + Copyright (c) 1990-2000 Info-ZIP. All rights reserved. + + See the accompanying file LICENSE, version 2000-Apr-09 or later + (the contents of which are also included in zip.h) for terms of use. + If, for some reason, all these files are missing, the Info-ZIP license + also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html + + crypt.c (full version) by Info-ZIP. Last revised: [see crypt.h] + + The encryption/decryption parts of this source code (as opposed to the + non-echoing password parts) were originally written in Europe. The + whole source package can be freely distributed, including from the USA. + (Prior to January 2000, re-export from the US was a violation of US law.) + + This encryption code is a direct transcription of the algorithm from + Roger Schlafly, described by Phil Katz in the file appnote.txt. This + file (appnote.txt) is distributed with the PKZIP program (even in the + version without encryption capabilities). + + ------------------------------------------------------------------------------------ + + Changes in unzip.c + + 2007-2008 - Even Rouault - Addition of cpl_unzGetCurrentFileZStreamPos + 2007-2008 - Even Rouault - Decoration of symbol names unz* -> cpl_unz* + 2007-2008 - Even Rouault - Remove old C style function prototypes + 2007-2008 - Even Rouault - Add unzip support for ZIP64 + + Copyright (C) 2007-2008 Even Rouault + + + Oct-2009 - Mathias Svensson - Removed cpl_* from symbol names (Even Rouault added them but since this is now moved to a new project (minizip64) I renamed them again). + Oct-2009 - Mathias Svensson - Fixed problem if uncompressed size was > 4G and compressed size was <4G + should only read the compressed/uncompressed size from the Zip64 format if + the size from normal header was 0xFFFFFFFF + Oct-2009 - Mathias Svensson - Applied some bug fixes from paches recived from Gilles Vollant + Oct-2009 - Mathias Svensson - Applied support to unzip files with compression mathod BZIP2 (bzip2 lib is required) + Patch created by Daniel Borca + + Jan-2010 - back to unzip and minizip 1.0 name scheme, with compatibility layer + + Copyright (C) 1998 - 2010 Gilles Vollant, Even Rouault, Mathias Svensson + +*/ + + +#include +#include +#include + +#ifndef NOUNCRYPT + #define NOUNCRYPT +#endif + +#include "zlib.h" +#include "unzip.h" + +#ifdef STDC +# include +# include +# include +#endif +#ifdef NO_ERRNO_H + extern int errno; +#else +# include +#endif + + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + + +#ifndef CASESENSITIVITYDEFAULT_NO +# if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES) +# define CASESENSITIVITYDEFAULT_NO +# endif +#endif + + +#ifndef UNZ_BUFSIZE +#define UNZ_BUFSIZE (16384) +#endif + +#ifndef UNZ_MAXFILENAMEINZIP +#define UNZ_MAXFILENAMEINZIP (256) +#endif + +#ifndef ALLOC +# define ALLOC(size) (malloc(size)) +#endif +#ifndef TRYFREE +# define TRYFREE(p) {if (p) free(p);} +#endif + +#define SIZECENTRALDIRITEM (0x2e) +#define SIZEZIPLOCALHEADER (0x1e) + + +const char unz_copyright[] = + " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll"; + +/* unz_file_info_interntal contain internal info about a file in zipfile*/ +typedef struct unz_file_info64_internal_s +{ + ZPOS64_T offset_curfile;/* relative offset of local header 8 bytes */ +} unz_file_info64_internal; + + +/* file_in_zip_read_info_s contain internal information about a file in zipfile, + when reading and decompress it */ +typedef struct +{ + char *read_buffer; /* internal buffer for compressed data */ + z_stream stream; /* zLib stream structure for inflate */ + +#ifdef HAVE_BZIP2 + bz_stream bstream; /* bzLib stream structure for bziped */ +#endif + + ZPOS64_T pos_in_zipfile; /* position in byte on the zipfile, for fseek*/ + uLong stream_initialised; /* flag set if stream structure is initialised*/ + + ZPOS64_T offset_local_extrafield;/* offset of the local extra field */ + uInt size_local_extrafield;/* size of the local extra field */ + ZPOS64_T pos_local_extrafield; /* position in the local extra field in read*/ + ZPOS64_T total_out_64; + + uLong crc32; /* crc32 of all data uncompressed */ + uLong crc32_wait; /* crc32 we must obtain after decompress all */ + ZPOS64_T rest_read_compressed; /* number of byte to be decompressed */ + ZPOS64_T rest_read_uncompressed;/*number of byte to be obtained after decomp*/ + zlib_filefunc64_32_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + uLong compression_method; /* compression method (0==store) */ + ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + int raw; +} file_in_zip64_read_info_s; + + +/* unz64_s contain internal information about the zipfile +*/ +typedef struct +{ + zlib_filefunc64_32_def z_filefunc; + int is64bitOpenFunction; + voidpf filestream; /* io structore of the zipfile */ + unz_global_info64 gi; /* public global information */ + ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + ZPOS64_T num_file; /* number of the current file in the zipfile*/ + ZPOS64_T pos_in_central_dir; /* pos of the current file in the central dir*/ + ZPOS64_T current_file_ok; /* flag about the usability of the current file*/ + ZPOS64_T central_pos; /* position of the beginning of the central dir*/ + + ZPOS64_T size_central_dir; /* size of the central directory */ + ZPOS64_T offset_central_dir; /* offset of start of central directory with + respect to the starting disk number */ + + unz_file_info64 cur_file_info; /* public info about the current file in zip*/ + unz_file_info64_internal cur_file_info_internal; /* private info about it*/ + file_in_zip64_read_info_s* pfile_in_zip_read; /* structure about the current + file if we are decompressing it */ + int encrypted; + + int isZip64; + +# ifndef NOUNCRYPT + unsigned long keys[3]; /* keys defining the pseudo-random sequence */ + const z_crc_t* pcrc_32_tab; +# endif +} unz64_s; + + +#ifndef NOUNCRYPT +#include "crypt.h" +#endif + +/* =========================================================================== + Read a byte from a gz_stream; update next_in and avail_in. Return EOF + for end of file. + IN assertion: the stream s has been sucessfully opened for reading. +*/ + + +local int unz64local_getByte OF(( + const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + int *pi)); + +local int unz64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, int *pi) +{ + unsigned char c; + int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,&c,1); + if (err==1) + { + *pi = (int)c; + return UNZ_OK; + } + else + { + if (ZERROR64(*pzlib_filefunc_def,filestream)) + return UNZ_ERRNO; + else + return UNZ_EOF; + } +} + + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets +*/ +local int unz64local_getShort OF(( + const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int unz64local_getShort (const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX) +{ + uLong x ; + int i = 0; + int err; + + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((uLong)i)<<8; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int unz64local_getLong OF(( + const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int unz64local_getLong (const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX) +{ + uLong x ; + int i = 0; + int err; + + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((uLong)i)<<8; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((uLong)i)<<16; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<24; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int unz64local_getLong64 OF(( + const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + ZPOS64_T *pX)); + + +local int unz64local_getLong64 (const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + ZPOS64_T *pX) +{ + ZPOS64_T x ; + int i = 0; + int err; + + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (ZPOS64_T)i; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<8; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<16; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<24; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<32; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<40; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<48; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<56; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +} + +/* My own strcmpi / strcasecmp */ +local int strcmpcasenosensitive_internal (const char* fileName1, const char* fileName2) +{ + for (;;) + { + char c1=*(fileName1++); + char c2=*(fileName2++); + if ((c1>='a') && (c1<='z')) + c1 -= 0x20; + if ((c2>='a') && (c2<='z')) + c2 -= 0x20; + if (c1=='\0') + return ((c2=='\0') ? 0 : -1); + if (c2=='\0') + return 1; + if (c1c2) + return 1; + } +} + + +#ifdef CASESENSITIVITYDEFAULT_NO +#define CASESENSITIVITYDEFAULTVALUE 2 +#else +#define CASESENSITIVITYDEFAULTVALUE 1 +#endif + +#ifndef STRCMPCASENOSENTIVEFUNCTION +#define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal +#endif + +/* + Compare two filename (fileName1,fileName2). + If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) + If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi + or strcasecmp) + If iCaseSenisivity = 0, case sensitivity is defaut of your operating system + (like 1 on Unix, 2 on Windows) + +*/ +extern int ZEXPORT unzStringFileNameCompare (const char* fileName1, + const char* fileName2, + int iCaseSensitivity) + +{ + if (iCaseSensitivity==0) + iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE; + + if (iCaseSensitivity==1) + return strcmp(fileName1,fileName2); + + return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2); +} + +#ifndef BUFREADCOMMENT +#define BUFREADCOMMENT (0x400) +#endif + +/* + Locate the Central directory of a zipfile (at the end, just before + the global comment) +*/ +local ZPOS64_T unz64local_SearchCentralDir OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)); +local ZPOS64_T unz64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream) +{ + unsigned char* buf; + ZPOS64_T uSizeFile; + ZPOS64_T uBackRead; + ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */ + ZPOS64_T uPosFound=0; + + if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + + uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos); + if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + TRYFREE(buf); + return uPosFound; +} + + +/* + Locate the Central directory 64 of a zipfile (at the end, just before + the global comment) +*/ +local ZPOS64_T unz64local_SearchCentralDir64 OF(( + const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream)); + +local ZPOS64_T unz64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream) +{ + unsigned char* buf; + ZPOS64_T uSizeFile; + ZPOS64_T uBackRead; + ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */ + ZPOS64_T uPosFound=0; + uLong uL; + ZPOS64_T relativeOffset; + + if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + + uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos); + if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x06) && ((*(buf+i+3))==0x07)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + TRYFREE(buf); + if (uPosFound == 0) + return 0; + + /* Zip64 end of central directory locator */ + if (ZSEEK64(*pzlib_filefunc_def,filestream, uPosFound,ZLIB_FILEFUNC_SEEK_SET)!=0) + return 0; + + /* the signature, already checked */ + if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK) + return 0; + + /* number of the disk with the start of the zip64 end of central directory */ + if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK) + return 0; + if (uL != 0) + return 0; + + /* relative offset of the zip64 end of central directory record */ + if (unz64local_getLong64(pzlib_filefunc_def,filestream,&relativeOffset)!=UNZ_OK) + return 0; + + /* total number of disks */ + if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK) + return 0; + if (uL != 1) + return 0; + + /* Goto end of central directory record */ + if (ZSEEK64(*pzlib_filefunc_def,filestream, relativeOffset,ZLIB_FILEFUNC_SEEK_SET)!=0) + return 0; + + /* the signature */ + if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK) + return 0; + + if (uL != 0x06064b50) + return 0; + + return relativeOffset; +} + +/* + Open a Zip file. path contain the full pathname (by example, + on a Windows NT computer "c:\\test\\zlib114.zip" or on an Unix computer + "zlib/zlib114.zip". + If the zipfile cannot be opened (file doesn't exist or in not valid), the + return value is NULL. + Else, the return value is a unzFile Handle, usable with other function + of this unzip package. +*/ +local unzFile unzOpenInternal (const void *path, + zlib_filefunc64_32_def* pzlib_filefunc64_32_def, + int is64bitOpenFunction) +{ + unz64_s us; + unz64_s *s; + ZPOS64_T central_pos; + uLong uL; + + uLong number_disk; /* number of the current dist, used for + spaning ZIP, unsupported, always 0*/ + uLong number_disk_with_CD; /* number the the disk with central dir, used + for spaning ZIP, unsupported, always 0*/ + ZPOS64_T number_entry_CD; /* total number of entries in + the central dir + (same than number_entry on nospan) */ + + int err=UNZ_OK; + + if (unz_copyright[0]!=' ') + return NULL; + + us.z_filefunc.zseek32_file = NULL; + us.z_filefunc.ztell32_file = NULL; + if (pzlib_filefunc64_32_def==NULL) + fill_fopen64_filefunc(&us.z_filefunc.zfile_func64); + else + us.z_filefunc = *pzlib_filefunc64_32_def; + us.is64bitOpenFunction = is64bitOpenFunction; + + + + us.filestream = ZOPEN64(us.z_filefunc, + path, + ZLIB_FILEFUNC_MODE_READ | + ZLIB_FILEFUNC_MODE_EXISTING); + if (us.filestream==NULL) + return NULL; + + central_pos = unz64local_SearchCentralDir64(&us.z_filefunc,us.filestream); + if (central_pos) + { + uLong uS; + ZPOS64_T uL64; + + us.isZip64 = 1; + + if (ZSEEK64(us.z_filefunc, us.filestream, + central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + /* the signature, already checked */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + + /* size of zip64 end of central directory record */ + if (unz64local_getLong64(&us.z_filefunc, us.filestream,&uL64)!=UNZ_OK) + err=UNZ_ERRNO; + + /* version made by */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&uS)!=UNZ_OK) + err=UNZ_ERRNO; + + /* version needed to extract */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&uS)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of this disk */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&number_disk)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of the disk with the start of the central directory */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&number_disk_with_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central directory on this disk */ + if (unz64local_getLong64(&us.z_filefunc, us.filestream,&us.gi.number_entry)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central directory */ + if (unz64local_getLong64(&us.z_filefunc, us.filestream,&number_entry_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((number_entry_CD!=us.gi.number_entry) || + (number_disk_with_CD!=0) || + (number_disk!=0)) + err=UNZ_BADZIPFILE; + + /* size of the central directory */ + if (unz64local_getLong64(&us.z_filefunc, us.filestream,&us.size_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* offset of start of central directory with respect to the + starting disk number */ + if (unz64local_getLong64(&us.z_filefunc, us.filestream,&us.offset_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + us.gi.size_comment = 0; + } + else + { + central_pos = unz64local_SearchCentralDir(&us.z_filefunc,us.filestream); + if (central_pos==0) + err=UNZ_ERRNO; + + us.isZip64 = 0; + + if (ZSEEK64(us.z_filefunc, us.filestream, + central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + /* the signature, already checked */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of this disk */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&number_disk)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of the disk with the start of the central directory */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&number_disk_with_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir on this disk */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + us.gi.number_entry = uL; + + /* total number of entries in the central dir */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + number_entry_CD = uL; + + if ((number_entry_CD!=us.gi.number_entry) || + (number_disk_with_CD!=0) || + (number_disk!=0)) + err=UNZ_BADZIPFILE; + + /* size of the central directory */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + us.size_central_dir = uL; + + /* offset of start of central directory with respect to the + starting disk number */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + us.offset_central_dir = uL; + + /* zipfile comment length */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&us.gi.size_comment)!=UNZ_OK) + err=UNZ_ERRNO; + } + + if ((central_pospfile_in_zip_read!=NULL) + unzCloseCurrentFile(file); + + ZCLOSE64(s->z_filefunc, s->filestream); + TRYFREE(s); + return UNZ_OK; +} + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. */ +extern int ZEXPORT unzGetGlobalInfo64 (unzFile file, unz_global_info64* pglobal_info) +{ + unz64_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + *pglobal_info=s->gi; + return UNZ_OK; +} + +extern int ZEXPORT unzGetGlobalInfo (unzFile file, unz_global_info* pglobal_info32) +{ + unz64_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + /* to do : check if number_entry is not truncated */ + pglobal_info32->number_entry = (uLong)s->gi.number_entry; + pglobal_info32->size_comment = s->gi.size_comment; + return UNZ_OK; +} +/* + Translate date/time from Dos format to tm_unz (readable more easilty) +*/ +local void unz64local_DosDateToTmuDate (ZPOS64_T ulDosDate, tm_unz* ptm) +{ + ZPOS64_T uDate; + uDate = (ZPOS64_T)(ulDosDate>>16); + ptm->tm_mday = (uInt)(uDate&0x1f) ; + ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ; + ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ; + + ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800); + ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ; + ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ; +} + +/* + Get Info about the current file in the zipfile, with internal only info +*/ +local int unz64local_GetCurrentFileInfoInternal OF((unzFile file, + unz_file_info64 *pfile_info, + unz_file_info64_internal + *pfile_info_internal, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize)); + +local int unz64local_GetCurrentFileInfoInternal (unzFile file, + unz_file_info64 *pfile_info, + unz_file_info64_internal + *pfile_info_internal, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize) +{ + unz64_s* s; + unz_file_info64 file_info; + unz_file_info64_internal file_info_internal; + int err=UNZ_OK; + uLong uMagic; + long lSeek=0; + uLong uL; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + if (ZSEEK64(s->z_filefunc, s->filestream, + s->pos_in_central_dir+s->byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + + /* we check the magic */ + if (err==UNZ_OK) + { + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x02014b50) + err=UNZ_BADZIPFILE; + } + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.version) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.version_needed) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.flag) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.compression_method) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&file_info.dosDate) != UNZ_OK) + err=UNZ_ERRNO; + + unz64local_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date); + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&file_info.crc) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK) + err=UNZ_ERRNO; + file_info.compressed_size = uL; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK) + err=UNZ_ERRNO; + file_info.uncompressed_size = uL; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.size_filename) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_extra) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_comment) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.disk_num_start) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.internal_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&file_info.external_fa) != UNZ_OK) + err=UNZ_ERRNO; + + // relative offset of local header + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK) + err=UNZ_ERRNO; + file_info_internal.offset_curfile = uL; + + lSeek+=file_info.size_filename; + if ((err==UNZ_OK) && (szFileName!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_filename0) && (fileNameBufferSize>0)) + if (ZREAD64(s->z_filefunc, s->filestream,szFileName,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek -= uSizeRead; + } + + // Read extrafield + if ((err==UNZ_OK) && (extraField!=NULL)) + { + ZPOS64_T uSizeRead ; + if (file_info.size_file_extraz_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + } + + if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0)) + if (ZREAD64(s->z_filefunc, s->filestream,extraField,(uLong)uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + + lSeek += file_info.size_file_extra - (uLong)uSizeRead; + } + else + lSeek += file_info.size_file_extra; + + + if ((err==UNZ_OK) && (file_info.size_file_extra != 0)) + { + uLong acc = 0; + + // since lSeek now points to after the extra field we need to move back + lSeek -= file_info.size_file_extra; + + if (lSeek!=0) + { + if (ZSEEK64(s->z_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + } + + while(acc < file_info.size_file_extra) + { + uLong headerId; + uLong dataSize; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&headerId) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&dataSize) != UNZ_OK) + err=UNZ_ERRNO; + + /* ZIP64 extra fields */ + if (headerId == 0x0001) + { + uLong uL; + + if(file_info.uncompressed_size == MAXU32) + { + if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK) + err=UNZ_ERRNO; + } + + if(file_info.compressed_size == MAXU32) + { + if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK) + err=UNZ_ERRNO; + } + + if(file_info_internal.offset_curfile == MAXU32) + { + /* Relative Header offset */ + if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK) + err=UNZ_ERRNO; + } + + if(file_info.disk_num_start == MAXU32) + { + /* Disk Start Number */ + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK) + err=UNZ_ERRNO; + } + + } + else + { + if (ZSEEK64(s->z_filefunc, s->filestream,dataSize,ZLIB_FILEFUNC_SEEK_CUR)!=0) + err=UNZ_ERRNO; + } + + acc += 2 + 2 + dataSize; + } + } + + if ((err==UNZ_OK) && (szComment!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_commentz_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + } + + if ((file_info.size_file_comment>0) && (commentBufferSize>0)) + if (ZREAD64(s->z_filefunc, s->filestream,szComment,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek+=file_info.size_file_comment - uSizeRead; + } + else + lSeek+=file_info.size_file_comment; + + + if ((err==UNZ_OK) && (pfile_info!=NULL)) + *pfile_info=file_info; + + if ((err==UNZ_OK) && (pfile_info_internal!=NULL)) + *pfile_info_internal=file_info_internal; + + return err; +} + + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. +*/ +extern int ZEXPORT unzGetCurrentFileInfo64 (unzFile file, + unz_file_info64 * pfile_info, + char * szFileName, uLong fileNameBufferSize, + void *extraField, uLong extraFieldBufferSize, + char* szComment, uLong commentBufferSize) +{ + return unz64local_GetCurrentFileInfoInternal(file,pfile_info,NULL, + szFileName,fileNameBufferSize, + extraField,extraFieldBufferSize, + szComment,commentBufferSize); +} + +extern int ZEXPORT unzGetCurrentFileInfo (unzFile file, + unz_file_info * pfile_info, + char * szFileName, uLong fileNameBufferSize, + void *extraField, uLong extraFieldBufferSize, + char* szComment, uLong commentBufferSize) +{ + int err; + unz_file_info64 file_info64; + err = unz64local_GetCurrentFileInfoInternal(file,&file_info64,NULL, + szFileName,fileNameBufferSize, + extraField,extraFieldBufferSize, + szComment,commentBufferSize); + if ((err==UNZ_OK) && (pfile_info != NULL)) + { + pfile_info->version = file_info64.version; + pfile_info->version_needed = file_info64.version_needed; + pfile_info->flag = file_info64.flag; + pfile_info->compression_method = file_info64.compression_method; + pfile_info->dosDate = file_info64.dosDate; + pfile_info->crc = file_info64.crc; + + pfile_info->size_filename = file_info64.size_filename; + pfile_info->size_file_extra = file_info64.size_file_extra; + pfile_info->size_file_comment = file_info64.size_file_comment; + + pfile_info->disk_num_start = file_info64.disk_num_start; + pfile_info->internal_fa = file_info64.internal_fa; + pfile_info->external_fa = file_info64.external_fa; + + pfile_info->tmu_date = file_info64.tmu_date, + + + pfile_info->compressed_size = (uLong)file_info64.compressed_size; + pfile_info->uncompressed_size = (uLong)file_info64.uncompressed_size; + + } + return err; +} +/* + Set the current file of the zipfile to the first file. + return UNZ_OK if there is no problem +*/ +extern int ZEXPORT unzGoToFirstFile (unzFile file) +{ + int err=UNZ_OK; + unz64_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + s->pos_in_central_dir=s->offset_central_dir; + s->num_file=0; + err=unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + +/* + Set the current file of the zipfile to the next file. + return UNZ_OK if there is no problem + return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. +*/ +extern int ZEXPORT unzGoToNextFile (unzFile file) +{ + unz64_s* s; + int err; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + if (s->gi.number_entry != 0xffff) /* 2^16 files overflow hack */ + if (s->num_file+1==s->gi.number_entry) + return UNZ_END_OF_LIST_OF_FILE; + + s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename + + s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ; + s->num_file++; + err = unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + + +/* + Try locate the file szFileName in the zipfile. + For the iCaseSensitivity signification, see unzStringFileNameCompare + + return value : + UNZ_OK if the file is found. It becomes the current file. + UNZ_END_OF_LIST_OF_FILE if the file is not found +*/ +extern int ZEXPORT unzLocateFile (unzFile file, const char *szFileName, int iCaseSensitivity) +{ + unz64_s* s; + int err; + + /* We remember the 'current' position in the file so that we can jump + * back there if we fail. + */ + unz_file_info64 cur_file_infoSaved; + unz_file_info64_internal cur_file_info_internalSaved; + ZPOS64_T num_fileSaved; + ZPOS64_T pos_in_central_dirSaved; + + + if (file==NULL) + return UNZ_PARAMERROR; + + if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP) + return UNZ_PARAMERROR; + + s=(unz64_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + + /* Save the current state */ + num_fileSaved = s->num_file; + pos_in_central_dirSaved = s->pos_in_central_dir; + cur_file_infoSaved = s->cur_file_info; + cur_file_info_internalSaved = s->cur_file_info_internal; + + err = unzGoToFirstFile(file); + + while (err == UNZ_OK) + { + char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1]; + err = unzGetCurrentFileInfo64(file,NULL, + szCurrentFileName,sizeof(szCurrentFileName)-1, + NULL,0,NULL,0); + if (err == UNZ_OK) + { + if (unzStringFileNameCompare(szCurrentFileName, + szFileName,iCaseSensitivity)==0) + return UNZ_OK; + err = unzGoToNextFile(file); + } + } + + /* We failed, so restore the state of the 'current file' to where we + * were. + */ + s->num_file = num_fileSaved ; + s->pos_in_central_dir = pos_in_central_dirSaved ; + s->cur_file_info = cur_file_infoSaved; + s->cur_file_info_internal = cur_file_info_internalSaved; + return err; +} + + +/* +/////////////////////////////////////////// +// Contributed by Ryan Haksi (mailto://cryogen@infoserve.net) +// I need random access +// +// Further optimization could be realized by adding an ability +// to cache the directory in memory. The goal being a single +// comprehensive file read to put the file I need in a memory. +*/ + +/* +typedef struct unz_file_pos_s +{ + ZPOS64_T pos_in_zip_directory; // offset in file + ZPOS64_T num_of_file; // # of file +} unz_file_pos; +*/ + +extern int ZEXPORT unzGetFilePos64(unzFile file, unz64_file_pos* file_pos) +{ + unz64_s* s; + + if (file==NULL || file_pos==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + + file_pos->pos_in_zip_directory = s->pos_in_central_dir; + file_pos->num_of_file = s->num_file; + + return UNZ_OK; +} + +extern int ZEXPORT unzGetFilePos( + unzFile file, + unz_file_pos* file_pos) +{ + unz64_file_pos file_pos64; + int err = unzGetFilePos64(file,&file_pos64); + if (err==UNZ_OK) + { + file_pos->pos_in_zip_directory = (uLong)file_pos64.pos_in_zip_directory; + file_pos->num_of_file = (uLong)file_pos64.num_of_file; + } + return err; +} + +extern int ZEXPORT unzGoToFilePos64(unzFile file, const unz64_file_pos* file_pos) +{ + unz64_s* s; + int err; + + if (file==NULL || file_pos==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + + /* jump to the right spot */ + s->pos_in_central_dir = file_pos->pos_in_zip_directory; + s->num_file = file_pos->num_of_file; + + /* set the current file */ + err = unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + /* return results */ + s->current_file_ok = (err == UNZ_OK); + return err; +} + +extern int ZEXPORT unzGoToFilePos( + unzFile file, + unz_file_pos* file_pos) +{ + unz64_file_pos file_pos64; + if (file_pos == NULL) + return UNZ_PARAMERROR; + + file_pos64.pos_in_zip_directory = file_pos->pos_in_zip_directory; + file_pos64.num_of_file = file_pos->num_of_file; + return unzGoToFilePos64(file,&file_pos64); +} + +/* +// Unzip Helper Functions - should be here? +/////////////////////////////////////////// +*/ + +/* + Read the local header of the current zipfile + Check the coherency of the local header and info in the end of central + directory about this file + store in *piSizeVar the size of extra info in local header + (filename and size of extra field data) +*/ +local int unz64local_CheckCurrentFileCoherencyHeader (unz64_s* s, uInt* piSizeVar, + ZPOS64_T * poffset_local_extrafield, + uInt * psize_local_extrafield) +{ + uLong uMagic,uData,uFlags; + uLong size_filename; + uLong size_extra_field; + int err=UNZ_OK; + + *piSizeVar = 0; + *poffset_local_extrafield = 0; + *psize_local_extrafield = 0; + + if (ZSEEK64(s->z_filefunc, s->filestream,s->cur_file_info_internal.offset_curfile + + s->byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + + if (err==UNZ_OK) + { + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x04034b50) + err=UNZ_BADZIPFILE; + } + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) + err=UNZ_ERRNO; +/* + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion)) + err=UNZ_BADZIPFILE; +*/ + if (unz64local_getShort(&s->z_filefunc, s->filestream,&uFlags) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method)) + err=UNZ_BADZIPFILE; + + if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) && +/* #ifdef HAVE_BZIP2 */ + (s->cur_file_info.compression_method!=Z_BZIP2ED) && +/* #endif */ + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* date/time */ + err=UNZ_ERRNO; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* crc */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) && ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size compr */ + err=UNZ_ERRNO; + else if (uData != 0xFFFFFFFF && (err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) && ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size uncompr */ + err=UNZ_ERRNO; + else if (uData != 0xFFFFFFFF && (err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&size_filename) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename)) + err=UNZ_BADZIPFILE; + + *piSizeVar += (uInt)size_filename; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&size_extra_field) != UNZ_OK) + err=UNZ_ERRNO; + *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile + + SIZEZIPLOCALHEADER + size_filename; + *psize_local_extrafield = (uInt)size_extra_field; + + *piSizeVar += (uInt)size_extra_field; + + return err; +} + +/* + Open for reading data the current file in the zipfile. + If there is no error and the file is opened, the return value is UNZ_OK. +*/ +extern int ZEXPORT unzOpenCurrentFile3 (unzFile file, int* method, + int* level, int raw, const char* password) +{ + int err=UNZ_OK; + uInt iSizeVar; + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + ZPOS64_T offset_local_extrafield; /* offset of the local extra field */ + uInt size_local_extrafield; /* size of the local extra field */ +# ifndef NOUNCRYPT + char source[12]; +# else + if (password != NULL) + return UNZ_PARAMERROR; +# endif + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + if (!s->current_file_ok) + return UNZ_PARAMERROR; + + if (s->pfile_in_zip_read != NULL) + unzCloseCurrentFile(file); + + if (unz64local_CheckCurrentFileCoherencyHeader(s,&iSizeVar, &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK) + return UNZ_BADZIPFILE; + + pfile_in_zip_read_info = (file_in_zip64_read_info_s*)ALLOC(sizeof(file_in_zip64_read_info_s)); + if (pfile_in_zip_read_info==NULL) + return UNZ_INTERNALERROR; + + pfile_in_zip_read_info->read_buffer=(char*)ALLOC(UNZ_BUFSIZE); + pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield; + pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield; + pfile_in_zip_read_info->pos_local_extrafield=0; + pfile_in_zip_read_info->raw=raw; + + if (pfile_in_zip_read_info->read_buffer==NULL) + { + TRYFREE(pfile_in_zip_read_info); + return UNZ_INTERNALERROR; + } + + pfile_in_zip_read_info->stream_initialised=0; + + if (method!=NULL) + *method = (int)s->cur_file_info.compression_method; + + if (level!=NULL) + { + *level = 6; + switch (s->cur_file_info.flag & 0x06) + { + case 6 : *level = 1; break; + case 4 : *level = 2; break; + case 2 : *level = 9; break; + } + } + + if ((s->cur_file_info.compression_method!=0) && +/* #ifdef HAVE_BZIP2 */ + (s->cur_file_info.compression_method!=Z_BZIP2ED) && +/* #endif */ + (s->cur_file_info.compression_method!=Z_DEFLATED)) + + err=UNZ_BADZIPFILE; + + pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc; + pfile_in_zip_read_info->crc32=0; + pfile_in_zip_read_info->total_out_64=0; + pfile_in_zip_read_info->compression_method = s->cur_file_info.compression_method; + pfile_in_zip_read_info->filestream=s->filestream; + pfile_in_zip_read_info->z_filefunc=s->z_filefunc; + pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile; + + pfile_in_zip_read_info->stream.total_out = 0; + + if ((s->cur_file_info.compression_method==Z_BZIP2ED) && (!raw)) + { +#ifdef HAVE_BZIP2 + pfile_in_zip_read_info->bstream.bzalloc = (void *(*) (void *, int, int))0; + pfile_in_zip_read_info->bstream.bzfree = (free_func)0; + pfile_in_zip_read_info->bstream.opaque = (voidpf)0; + pfile_in_zip_read_info->bstream.state = (voidpf)0; + + pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; + pfile_in_zip_read_info->stream.zfree = (free_func)0; + pfile_in_zip_read_info->stream.opaque = (voidpf)0; + pfile_in_zip_read_info->stream.next_in = (voidpf)0; + pfile_in_zip_read_info->stream.avail_in = 0; + + err=BZ2_bzDecompressInit(&pfile_in_zip_read_info->bstream, 0, 0); + if (err == Z_OK) + pfile_in_zip_read_info->stream_initialised=Z_BZIP2ED; + else + { + TRYFREE(pfile_in_zip_read_info); + return err; + } +#else + pfile_in_zip_read_info->raw=1; +#endif + } + else if ((s->cur_file_info.compression_method==Z_DEFLATED) && (!raw)) + { + pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; + pfile_in_zip_read_info->stream.zfree = (free_func)0; + pfile_in_zip_read_info->stream.opaque = (voidpf)0; + pfile_in_zip_read_info->stream.next_in = 0; + pfile_in_zip_read_info->stream.avail_in = 0; + + err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS); + if (err == Z_OK) + pfile_in_zip_read_info->stream_initialised=Z_DEFLATED; + else + { + TRYFREE(pfile_in_zip_read_info); + return err; + } + /* windowBits is passed < 0 to tell that there is no zlib header. + * Note that in this case inflate *requires* an extra "dummy" byte + * after the compressed stream in order to complete decompression and + * return Z_STREAM_END. + * In unzip, i don't wait absolutely Z_STREAM_END because I known the + * size of both compressed and uncompressed data + */ + } + pfile_in_zip_read_info->rest_read_compressed = + s->cur_file_info.compressed_size ; + pfile_in_zip_read_info->rest_read_uncompressed = + s->cur_file_info.uncompressed_size ; + + + pfile_in_zip_read_info->pos_in_zipfile = + s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER + + iSizeVar; + + pfile_in_zip_read_info->stream.avail_in = (uInt)0; + + s->pfile_in_zip_read = pfile_in_zip_read_info; + s->encrypted = 0; + +# ifndef NOUNCRYPT + if (password != NULL) + { + int i; + s->pcrc_32_tab = get_crc_table(); + init_keys(password,s->keys,s->pcrc_32_tab); + if (ZSEEK64(s->z_filefunc, s->filestream, + s->pfile_in_zip_read->pos_in_zipfile + + s->pfile_in_zip_read->byte_before_the_zipfile, + SEEK_SET)!=0) + return UNZ_INTERNALERROR; + if(ZREAD64(s->z_filefunc, s->filestream,source, 12)<12) + return UNZ_INTERNALERROR; + + for (i = 0; i<12; i++) + zdecode(s->keys,s->pcrc_32_tab,source[i]); + + s->pfile_in_zip_read->pos_in_zipfile+=12; + s->encrypted=1; + } +# endif + + + return UNZ_OK; +} + +extern int ZEXPORT unzOpenCurrentFile (unzFile file) +{ + return unzOpenCurrentFile3(file, NULL, NULL, 0, NULL); +} + +extern int ZEXPORT unzOpenCurrentFilePassword (unzFile file, const char* password) +{ + return unzOpenCurrentFile3(file, NULL, NULL, 0, password); +} + +extern int ZEXPORT unzOpenCurrentFile2 (unzFile file, int* method, int* level, int raw) +{ + return unzOpenCurrentFile3(file, method, level, raw, NULL); +} + +/** Addition for GDAL : START */ + +extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64( unzFile file) +{ + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + s=(unz64_s*)file; + if (file==NULL) + return 0; //UNZ_PARAMERROR; + pfile_in_zip_read_info=s->pfile_in_zip_read; + if (pfile_in_zip_read_info==NULL) + return 0; //UNZ_PARAMERROR; + return pfile_in_zip_read_info->pos_in_zipfile + + pfile_in_zip_read_info->byte_before_the_zipfile; +} + +/** Addition for GDAL : END */ + +/* + Read bytes from the current file. + buf contain buffer where data must be copied + len the size of buf. + + return the number of byte copied if somes bytes are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ +extern int ZEXPORT unzReadCurrentFile (unzFile file, voidp buf, unsigned len) +{ + int err=UNZ_OK; + uInt iRead = 0; + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + + if (pfile_in_zip_read_info->read_buffer == NULL) + return UNZ_END_OF_LIST_OF_FILE; + if (len==0) + return 0; + + pfile_in_zip_read_info->stream.next_out = (Bytef*)buf; + + pfile_in_zip_read_info->stream.avail_out = (uInt)len; + + if ((len>pfile_in_zip_read_info->rest_read_uncompressed) && + (!(pfile_in_zip_read_info->raw))) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_uncompressed; + + if ((len>pfile_in_zip_read_info->rest_read_compressed+ + pfile_in_zip_read_info->stream.avail_in) && + (pfile_in_zip_read_info->raw)) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_compressed+ + pfile_in_zip_read_info->stream.avail_in; + + while (pfile_in_zip_read_info->stream.avail_out>0) + { + if ((pfile_in_zip_read_info->stream.avail_in==0) && + (pfile_in_zip_read_info->rest_read_compressed>0)) + { + uInt uReadThis = UNZ_BUFSIZE; + if (pfile_in_zip_read_info->rest_read_compressedrest_read_compressed; + if (uReadThis == 0) + return UNZ_EOF; + if (ZSEEK64(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->pos_in_zipfile + + pfile_in_zip_read_info->byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + if (ZREAD64(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->read_buffer, + uReadThis)!=uReadThis) + return UNZ_ERRNO; + + +# ifndef NOUNCRYPT + if(s->encrypted) + { + uInt i; + for(i=0;iread_buffer[i] = + zdecode(s->keys,s->pcrc_32_tab, + pfile_in_zip_read_info->read_buffer[i]); + } +# endif + + + pfile_in_zip_read_info->pos_in_zipfile += uReadThis; + + pfile_in_zip_read_info->rest_read_compressed-=uReadThis; + + pfile_in_zip_read_info->stream.next_in = + (Bytef*)pfile_in_zip_read_info->read_buffer; + pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis; + } + + if ((pfile_in_zip_read_info->compression_method==0) || (pfile_in_zip_read_info->raw)) + { + uInt uDoCopy,i ; + + if ((pfile_in_zip_read_info->stream.avail_in == 0) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + return (iRead==0) ? UNZ_EOF : iRead; + + if (pfile_in_zip_read_info->stream.avail_out < + pfile_in_zip_read_info->stream.avail_in) + uDoCopy = pfile_in_zip_read_info->stream.avail_out ; + else + uDoCopy = pfile_in_zip_read_info->stream.avail_in ; + + for (i=0;istream.next_out+i) = + *(pfile_in_zip_read_info->stream.next_in+i); + + pfile_in_zip_read_info->total_out_64 = pfile_in_zip_read_info->total_out_64 + uDoCopy; + + pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32, + pfile_in_zip_read_info->stream.next_out, + uDoCopy); + pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy; + pfile_in_zip_read_info->stream.avail_in -= uDoCopy; + pfile_in_zip_read_info->stream.avail_out -= uDoCopy; + pfile_in_zip_read_info->stream.next_out += uDoCopy; + pfile_in_zip_read_info->stream.next_in += uDoCopy; + pfile_in_zip_read_info->stream.total_out += uDoCopy; + iRead += uDoCopy; + } + else if (pfile_in_zip_read_info->compression_method==Z_BZIP2ED) + { +#ifdef HAVE_BZIP2 + uLong uTotalOutBefore,uTotalOutAfter; + const Bytef *bufBefore; + uLong uOutThis; + + pfile_in_zip_read_info->bstream.next_in = (char*)pfile_in_zip_read_info->stream.next_in; + pfile_in_zip_read_info->bstream.avail_in = pfile_in_zip_read_info->stream.avail_in; + pfile_in_zip_read_info->bstream.total_in_lo32 = pfile_in_zip_read_info->stream.total_in; + pfile_in_zip_read_info->bstream.total_in_hi32 = 0; + pfile_in_zip_read_info->bstream.next_out = (char*)pfile_in_zip_read_info->stream.next_out; + pfile_in_zip_read_info->bstream.avail_out = pfile_in_zip_read_info->stream.avail_out; + pfile_in_zip_read_info->bstream.total_out_lo32 = pfile_in_zip_read_info->stream.total_out; + pfile_in_zip_read_info->bstream.total_out_hi32 = 0; + + uTotalOutBefore = pfile_in_zip_read_info->bstream.total_out_lo32; + bufBefore = (const Bytef *)pfile_in_zip_read_info->bstream.next_out; + + err=BZ2_bzDecompress(&pfile_in_zip_read_info->bstream); + + uTotalOutAfter = pfile_in_zip_read_info->bstream.total_out_lo32; + uOutThis = uTotalOutAfter-uTotalOutBefore; + + pfile_in_zip_read_info->total_out_64 = pfile_in_zip_read_info->total_out_64 + uOutThis; + + pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32,bufBefore, (uInt)(uOutThis)); + pfile_in_zip_read_info->rest_read_uncompressed -= uOutThis; + iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); + + pfile_in_zip_read_info->stream.next_in = (Bytef*)pfile_in_zip_read_info->bstream.next_in; + pfile_in_zip_read_info->stream.avail_in = pfile_in_zip_read_info->bstream.avail_in; + pfile_in_zip_read_info->stream.total_in = pfile_in_zip_read_info->bstream.total_in_lo32; + pfile_in_zip_read_info->stream.next_out = (Bytef*)pfile_in_zip_read_info->bstream.next_out; + pfile_in_zip_read_info->stream.avail_out = pfile_in_zip_read_info->bstream.avail_out; + pfile_in_zip_read_info->stream.total_out = pfile_in_zip_read_info->bstream.total_out_lo32; + + if (err==BZ_STREAM_END) + return (iRead==0) ? UNZ_EOF : iRead; + if (err!=BZ_OK) + break; +#endif + } // end Z_BZIP2ED + else + { + ZPOS64_T uTotalOutBefore,uTotalOutAfter; + const Bytef *bufBefore; + ZPOS64_T uOutThis; + int flush=Z_SYNC_FLUSH; + + uTotalOutBefore = pfile_in_zip_read_info->stream.total_out; + bufBefore = pfile_in_zip_read_info->stream.next_out; + + /* + if ((pfile_in_zip_read_info->rest_read_uncompressed == + pfile_in_zip_read_info->stream.avail_out) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + flush = Z_FINISH; + */ + err=inflate(&pfile_in_zip_read_info->stream,flush); + + if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL)) + err = Z_DATA_ERROR; + + uTotalOutAfter = pfile_in_zip_read_info->stream.total_out; + uOutThis = uTotalOutAfter-uTotalOutBefore; + + pfile_in_zip_read_info->total_out_64 = pfile_in_zip_read_info->total_out_64 + uOutThis; + + pfile_in_zip_read_info->crc32 = + crc32(pfile_in_zip_read_info->crc32,bufBefore, + (uInt)(uOutThis)); + + pfile_in_zip_read_info->rest_read_uncompressed -= + uOutThis; + + iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); + + if (err==Z_STREAM_END) + return (iRead==0) ? UNZ_EOF : iRead; + if (err!=Z_OK) + break; + } + } + + if (err==Z_OK) + return iRead; + return err; +} + + +/* + Give the current position in uncompressed data +*/ +extern z_off_t ZEXPORT unztell (unzFile file) +{ + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + return (z_off_t)pfile_in_zip_read_info->stream.total_out; +} + +extern ZPOS64_T ZEXPORT unztell64 (unzFile file) +{ + + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return (ZPOS64_T)-1; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return (ZPOS64_T)-1; + + return pfile_in_zip_read_info->total_out_64; +} + + +/* + return 1 if the end of file was reached, 0 elsewhere +*/ +extern int ZEXPORT unzeof (unzFile file) +{ + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + if (pfile_in_zip_read_info->rest_read_uncompressed == 0) + return 1; + else + return 0; +} + + + +/* +Read extra field from the current file (opened by unzOpenCurrentFile) +This is the local-header version of the extra field (sometimes, there is +more info in the local-header version than in the central-header) + + if buf==NULL, it return the size of the local extra field that can be read + + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of bytes copied in buf, or (if <0) + the error code +*/ +extern int ZEXPORT unzGetLocalExtrafield (unzFile file, voidp buf, unsigned len) +{ + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + uInt read_now; + ZPOS64_T size_to_read; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + size_to_read = (pfile_in_zip_read_info->size_local_extrafield - + pfile_in_zip_read_info->pos_local_extrafield); + + if (buf==NULL) + return (int)size_to_read; + + if (len>size_to_read) + read_now = (uInt)size_to_read; + else + read_now = (uInt)len ; + + if (read_now==0) + return 0; + + if (ZSEEK64(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->offset_local_extrafield + + pfile_in_zip_read_info->pos_local_extrafield, + ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + if (ZREAD64(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + buf,read_now)!=read_now) + return UNZ_ERRNO; + + return (int)read_now; +} + +/* + Close the file in zip opened with unzOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ +extern int ZEXPORT unzCloseCurrentFile (unzFile file) +{ + int err=UNZ_OK; + + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + + if ((pfile_in_zip_read_info->rest_read_uncompressed == 0) && + (!pfile_in_zip_read_info->raw)) + { + if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait) + err=UNZ_CRCERROR; + } + + + TRYFREE(pfile_in_zip_read_info->read_buffer); + pfile_in_zip_read_info->read_buffer = NULL; + if (pfile_in_zip_read_info->stream_initialised == Z_DEFLATED) + inflateEnd(&pfile_in_zip_read_info->stream); +#ifdef HAVE_BZIP2 + else if (pfile_in_zip_read_info->stream_initialised == Z_BZIP2ED) + BZ2_bzDecompressEnd(&pfile_in_zip_read_info->bstream); +#endif + + + pfile_in_zip_read_info->stream_initialised = 0; + TRYFREE(pfile_in_zip_read_info); + + s->pfile_in_zip_read=NULL; + + return err; +} + + +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of byte copied or an error code <0 +*/ +extern int ZEXPORT unzGetGlobalComment (unzFile file, char * szComment, uLong uSizeBuf) +{ + unz64_s* s; + uLong uReadThis ; + if (file==NULL) + return (int)UNZ_PARAMERROR; + s=(unz64_s*)file; + + uReadThis = uSizeBuf; + if (uReadThis>s->gi.size_comment) + uReadThis = s->gi.size_comment; + + if (ZSEEK64(s->z_filefunc,s->filestream,s->central_pos+22,ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + if (uReadThis>0) + { + *szComment='\0'; + if (ZREAD64(s->z_filefunc,s->filestream,szComment,uReadThis)!=uReadThis) + return UNZ_ERRNO; + } + + if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) + *(szComment+s->gi.size_comment)='\0'; + return (int)uReadThis; +} + +/* Additions by RX '2004 */ +extern ZPOS64_T ZEXPORT unzGetOffset64(unzFile file) +{ + unz64_s* s; + + if (file==NULL) + return 0; //UNZ_PARAMERROR; + s=(unz64_s*)file; + if (!s->current_file_ok) + return 0; + if (s->gi.number_entry != 0 && s->gi.number_entry != 0xffff) + if (s->num_file==s->gi.number_entry) + return 0; + return s->pos_in_central_dir; +} + +extern uLong ZEXPORT unzGetOffset (unzFile file) +{ + ZPOS64_T offset64; + + if (file==NULL) + return 0; //UNZ_PARAMERROR; + offset64 = unzGetOffset64(file); + return (uLong)offset64; +} + +extern int ZEXPORT unzSetOffset64(unzFile file, ZPOS64_T pos) +{ + unz64_s* s; + int err; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + + s->pos_in_central_dir = pos; + s->num_file = s->gi.number_entry; /* hack */ + err = unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + +extern int ZEXPORT unzSetOffset (unzFile file, uLong pos) +{ + return unzSetOffset64(file,pos); +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/unzip.h b/src/SDL2/external/zlib-1.2.8/contrib/minizip/unzip.h new file mode 100644 index 000000000..2104e3915 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/unzip.h @@ -0,0 +1,437 @@ +/* unzip.h -- IO for uncompress .zip files using zlib + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications of Unzip for Zip64 + Copyright (C) 2007-2008 Even Rouault + + Modifications for Zip64 support on both zip and unzip + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + + --------------------------------------------------------------------------------- + + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + --------------------------------------------------------------------------------- + + Changes + + See header of unzip64.c + +*/ + +#ifndef _unz64_H +#define _unz64_H + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef _ZLIB_H +#include "zlib.h" +#endif + +#ifndef _ZLIBIOAPI_H +#include "ioapi.h" +#endif + +#ifdef HAVE_BZIP2 +#include "bzlib.h" +#endif + +#define Z_BZIP2ED 12 + +#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP) +/* like the STRICT of WIN32, we define a pointer that cannot be converted + from (void*) without cast */ +typedef struct TagunzFile__ { int unused; } unzFile__; +typedef unzFile__ *unzFile; +#else +typedef voidp unzFile; +#endif + + +#define UNZ_OK (0) +#define UNZ_END_OF_LIST_OF_FILE (-100) +#define UNZ_ERRNO (Z_ERRNO) +#define UNZ_EOF (0) +#define UNZ_PARAMERROR (-102) +#define UNZ_BADZIPFILE (-103) +#define UNZ_INTERNALERROR (-104) +#define UNZ_CRCERROR (-105) + +/* tm_unz contain date/time info */ +typedef struct tm_unz_s +{ + uInt tm_sec; /* seconds after the minute - [0,59] */ + uInt tm_min; /* minutes after the hour - [0,59] */ + uInt tm_hour; /* hours since midnight - [0,23] */ + uInt tm_mday; /* day of the month - [1,31] */ + uInt tm_mon; /* months since January - [0,11] */ + uInt tm_year; /* years - [1980..2044] */ +} tm_unz; + +/* unz_global_info structure contain global data about the ZIPfile + These data comes from the end of central dir */ +typedef struct unz_global_info64_s +{ + ZPOS64_T number_entry; /* total number of entries in + the central dir on this disk */ + uLong size_comment; /* size of the global comment of the zipfile */ +} unz_global_info64; + +typedef struct unz_global_info_s +{ + uLong number_entry; /* total number of entries in + the central dir on this disk */ + uLong size_comment; /* size of the global comment of the zipfile */ +} unz_global_info; + +/* unz_file_info contain information about a file in the zipfile */ +typedef struct unz_file_info64_s +{ + uLong version; /* version made by 2 bytes */ + uLong version_needed; /* version needed to extract 2 bytes */ + uLong flag; /* general purpose bit flag 2 bytes */ + uLong compression_method; /* compression method 2 bytes */ + uLong dosDate; /* last mod file date in Dos fmt 4 bytes */ + uLong crc; /* crc-32 4 bytes */ + ZPOS64_T compressed_size; /* compressed size 8 bytes */ + ZPOS64_T uncompressed_size; /* uncompressed size 8 bytes */ + uLong size_filename; /* filename length 2 bytes */ + uLong size_file_extra; /* extra field length 2 bytes */ + uLong size_file_comment; /* file comment length 2 bytes */ + + uLong disk_num_start; /* disk number start 2 bytes */ + uLong internal_fa; /* internal file attributes 2 bytes */ + uLong external_fa; /* external file attributes 4 bytes */ + + tm_unz tmu_date; +} unz_file_info64; + +typedef struct unz_file_info_s +{ + uLong version; /* version made by 2 bytes */ + uLong version_needed; /* version needed to extract 2 bytes */ + uLong flag; /* general purpose bit flag 2 bytes */ + uLong compression_method; /* compression method 2 bytes */ + uLong dosDate; /* last mod file date in Dos fmt 4 bytes */ + uLong crc; /* crc-32 4 bytes */ + uLong compressed_size; /* compressed size 4 bytes */ + uLong uncompressed_size; /* uncompressed size 4 bytes */ + uLong size_filename; /* filename length 2 bytes */ + uLong size_file_extra; /* extra field length 2 bytes */ + uLong size_file_comment; /* file comment length 2 bytes */ + + uLong disk_num_start; /* disk number start 2 bytes */ + uLong internal_fa; /* internal file attributes 2 bytes */ + uLong external_fa; /* external file attributes 4 bytes */ + + tm_unz tmu_date; +} unz_file_info; + +extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1, + const char* fileName2, + int iCaseSensitivity)); +/* + Compare two filename (fileName1,fileName2). + If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) + If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi + or strcasecmp) + If iCaseSenisivity = 0, case sensitivity is defaut of your operating system + (like 1 on Unix, 2 on Windows) +*/ + + +extern unzFile ZEXPORT unzOpen OF((const char *path)); +extern unzFile ZEXPORT unzOpen64 OF((const void *path)); +/* + Open a Zip file. path contain the full pathname (by example, + on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer + "zlib/zlib113.zip". + If the zipfile cannot be opened (file don't exist or in not valid), the + return value is NULL. + Else, the return value is a unzFile Handle, usable with other function + of this unzip package. + the "64" function take a const void* pointer, because the path is just the + value passed to the open64_file_func callback. + Under Windows, if UNICODE is defined, using fill_fopen64_filefunc, the path + is a pointer to a wide unicode string (LPCTSTR is LPCWSTR), so const char* + does not describe the reality +*/ + + +extern unzFile ZEXPORT unzOpen2 OF((const char *path, + zlib_filefunc_def* pzlib_filefunc_def)); +/* + Open a Zip file, like unzOpen, but provide a set of file low level API + for read/write the zip file (see ioapi.h) +*/ + +extern unzFile ZEXPORT unzOpen2_64 OF((const void *path, + zlib_filefunc64_def* pzlib_filefunc_def)); +/* + Open a Zip file, like unz64Open, but provide a set of file low level API + for read/write the zip file (see ioapi.h) +*/ + +extern int ZEXPORT unzClose OF((unzFile file)); +/* + Close a ZipFile opened with unzOpen. + If there is files inside the .Zip opened with unzOpenCurrentFile (see later), + these files MUST be closed with unzCloseCurrentFile before call unzClose. + return UNZ_OK if there is no problem. */ + +extern int ZEXPORT unzGetGlobalInfo OF((unzFile file, + unz_global_info *pglobal_info)); + +extern int ZEXPORT unzGetGlobalInfo64 OF((unzFile file, + unz_global_info64 *pglobal_info)); +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. */ + + +extern int ZEXPORT unzGetGlobalComment OF((unzFile file, + char *szComment, + uLong uSizeBuf)); +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of byte copied or an error code <0 +*/ + + +/***************************************************************************/ +/* Unzip package allow you browse the directory of the zipfile */ + +extern int ZEXPORT unzGoToFirstFile OF((unzFile file)); +/* + Set the current file of the zipfile to the first file. + return UNZ_OK if there is no problem +*/ + +extern int ZEXPORT unzGoToNextFile OF((unzFile file)); +/* + Set the current file of the zipfile to the next file. + return UNZ_OK if there is no problem + return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. +*/ + +extern int ZEXPORT unzLocateFile OF((unzFile file, + const char *szFileName, + int iCaseSensitivity)); +/* + Try locate the file szFileName in the zipfile. + For the iCaseSensitivity signification, see unzStringFileNameCompare + + return value : + UNZ_OK if the file is found. It becomes the current file. + UNZ_END_OF_LIST_OF_FILE if the file is not found +*/ + + +/* ****************************************** */ +/* Ryan supplied functions */ +/* unz_file_info contain information about a file in the zipfile */ +typedef struct unz_file_pos_s +{ + uLong pos_in_zip_directory; /* offset in zip file directory */ + uLong num_of_file; /* # of file */ +} unz_file_pos; + +extern int ZEXPORT unzGetFilePos( + unzFile file, + unz_file_pos* file_pos); + +extern int ZEXPORT unzGoToFilePos( + unzFile file, + unz_file_pos* file_pos); + +typedef struct unz64_file_pos_s +{ + ZPOS64_T pos_in_zip_directory; /* offset in zip file directory */ + ZPOS64_T num_of_file; /* # of file */ +} unz64_file_pos; + +extern int ZEXPORT unzGetFilePos64( + unzFile file, + unz64_file_pos* file_pos); + +extern int ZEXPORT unzGoToFilePos64( + unzFile file, + const unz64_file_pos* file_pos); + +/* ****************************************** */ + +extern int ZEXPORT unzGetCurrentFileInfo64 OF((unzFile file, + unz_file_info64 *pfile_info, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize)); + +extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file, + unz_file_info *pfile_info, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize)); +/* + Get Info about the current file + if pfile_info!=NULL, the *pfile_info structure will contain somes info about + the current file + if szFileName!=NULL, the filemane string will be copied in szFileName + (fileNameBufferSize is the size of the buffer) + if extraField!=NULL, the extra field information will be copied in extraField + (extraFieldBufferSize is the size of the buffer). + This is the Central-header version of the extra field + if szComment!=NULL, the comment string of the file will be copied in szComment + (commentBufferSize is the size of the buffer) +*/ + + +/** Addition for GDAL : START */ + +extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64 OF((unzFile file)); + +/** Addition for GDAL : END */ + + +/***************************************************************************/ +/* for reading the content of the current zipfile, you can open it, read data + from it, and close it (you can close it before reading all the file) + */ + +extern int ZEXPORT unzOpenCurrentFile OF((unzFile file)); +/* + Open for reading data the current file in the zipfile. + If there is no error, the return value is UNZ_OK. +*/ + +extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file, + const char* password)); +/* + Open for reading data the current file in the zipfile. + password is a crypting password + If there is no error, the return value is UNZ_OK. +*/ + +extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file, + int* method, + int* level, + int raw)); +/* + Same than unzOpenCurrentFile, but open for read raw the file (not uncompress) + if raw==1 + *method will receive method of compression, *level will receive level of + compression + note : you can set level parameter as NULL (if you did not want known level, + but you CANNOT set method parameter as NULL +*/ + +extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file, + int* method, + int* level, + int raw, + const char* password)); +/* + Same than unzOpenCurrentFile, but open for read raw the file (not uncompress) + if raw==1 + *method will receive method of compression, *level will receive level of + compression + note : you can set level parameter as NULL (if you did not want known level, + but you CANNOT set method parameter as NULL +*/ + + +extern int ZEXPORT unzCloseCurrentFile OF((unzFile file)); +/* + Close the file in zip opened with unzOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ + +extern int ZEXPORT unzReadCurrentFile OF((unzFile file, + voidp buf, + unsigned len)); +/* + Read bytes from the current file (opened by unzOpenCurrentFile) + buf contain buffer where data must be copied + len the size of buf. + + return the number of byte copied if somes bytes are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ + +extern z_off_t ZEXPORT unztell OF((unzFile file)); + +extern ZPOS64_T ZEXPORT unztell64 OF((unzFile file)); +/* + Give the current position in uncompressed data +*/ + +extern int ZEXPORT unzeof OF((unzFile file)); +/* + return 1 if the end of file was reached, 0 elsewhere +*/ + +extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file, + voidp buf, + unsigned len)); +/* + Read extra field from the current file (opened by unzOpenCurrentFile) + This is the local-header version of the extra field (sometimes, there is + more info in the local-header version than in the central-header) + + if buf==NULL, it return the size of the local extra field + + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of bytes copied in buf, or (if <0) + the error code +*/ + +/***************************************************************************/ + +/* Get the current file offset */ +extern ZPOS64_T ZEXPORT unzGetOffset64 (unzFile file); +extern uLong ZEXPORT unzGetOffset (unzFile file); + +/* Set the current file offset */ +extern int ZEXPORT unzSetOffset64 (unzFile file, ZPOS64_T pos); +extern int ZEXPORT unzSetOffset (unzFile file, uLong pos); + + + +#ifdef __cplusplus +} +#endif + +#endif /* _unz64_H */ diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/zip.c b/src/SDL2/external/zlib-1.2.8/contrib/minizip/zip.c new file mode 100644 index 000000000..ea54853e8 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/zip.c @@ -0,0 +1,2007 @@ +/* zip.c -- IO on .zip files using zlib + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + + Changes + Oct-2009 - Mathias Svensson - Remove old C style function prototypes + Oct-2009 - Mathias Svensson - Added Zip64 Support when creating new file archives + Oct-2009 - Mathias Svensson - Did some code cleanup and refactoring to get better overview of some functions. + Oct-2009 - Mathias Svensson - Added zipRemoveExtraInfoBlock to strip extra field data from its ZIP64 data + It is used when recreting zip archive with RAW when deleting items from a zip. + ZIP64 data is automaticly added to items that needs it, and existing ZIP64 data need to be removed. + Oct-2009 - Mathias Svensson - Added support for BZIP2 as compression mode (bzip2 lib is required) + Jan-2010 - back to unzip and minizip 1.0 name scheme, with compatibility layer + +*/ + + +#include +#include +#include +#include +#include "zlib.h" +#include "zip.h" + +#ifdef STDC +# include +# include +# include +#endif +#ifdef NO_ERRNO_H + extern int errno; +#else +# include +#endif + + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +#ifndef VERSIONMADEBY +# define VERSIONMADEBY (0x0) /* platform depedent */ +#endif + +#ifndef Z_BUFSIZE +#define Z_BUFSIZE (64*1024) //(16384) +#endif + +#ifndef Z_MAXFILENAMEINZIP +#define Z_MAXFILENAMEINZIP (256) +#endif + +#ifndef ALLOC +# define ALLOC(size) (malloc(size)) +#endif +#ifndef TRYFREE +# define TRYFREE(p) {if (p) free(p);} +#endif + +/* +#define SIZECENTRALDIRITEM (0x2e) +#define SIZEZIPLOCALHEADER (0x1e) +*/ + +/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */ + + +// NOT sure that this work on ALL platform +#define MAKEULONG64(a, b) ((ZPOS64_T)(((unsigned long)(a)) | ((ZPOS64_T)((unsigned long)(b))) << 32)) + +#ifndef SEEK_CUR +#define SEEK_CUR 1 +#endif + +#ifndef SEEK_END +#define SEEK_END 2 +#endif + +#ifndef SEEK_SET +#define SEEK_SET 0 +#endif + +#ifndef DEF_MEM_LEVEL +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +#endif +const char zip_copyright[] =" zip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll"; + + +#define SIZEDATA_INDATABLOCK (4096-(4*4)) + +#define LOCALHEADERMAGIC (0x04034b50) +#define CENTRALHEADERMAGIC (0x02014b50) +#define ENDHEADERMAGIC (0x06054b50) +#define ZIP64ENDHEADERMAGIC (0x6064b50) +#define ZIP64ENDLOCHEADERMAGIC (0x7064b50) + +#define FLAG_LOCALHEADER_OFFSET (0x06) +#define CRC_LOCALHEADER_OFFSET (0x0e) + +#define SIZECENTRALHEADER (0x2e) /* 46 */ + +typedef struct linkedlist_datablock_internal_s +{ + struct linkedlist_datablock_internal_s* next_datablock; + uLong avail_in_this_block; + uLong filled_in_this_block; + uLong unused; /* for future use and alignement */ + unsigned char data[SIZEDATA_INDATABLOCK]; +} linkedlist_datablock_internal; + +typedef struct linkedlist_data_s +{ + linkedlist_datablock_internal* first_block; + linkedlist_datablock_internal* last_block; +} linkedlist_data; + + +typedef struct +{ + z_stream stream; /* zLib stream structure for inflate */ +#ifdef HAVE_BZIP2 + bz_stream bstream; /* bzLib stream structure for bziped */ +#endif + + int stream_initialised; /* 1 is stream is initialised */ + uInt pos_in_buffered_data; /* last written byte in buffered_data */ + + ZPOS64_T pos_local_header; /* offset of the local header of the file + currenty writing */ + char* central_header; /* central header data for the current file */ + uLong size_centralExtra; + uLong size_centralheader; /* size of the central header for cur file */ + uLong size_centralExtraFree; /* Extra bytes allocated to the centralheader but that are not used */ + uLong flag; /* flag of the file currently writing */ + + int method; /* compression method of file currenty wr.*/ + int raw; /* 1 for directly writing raw data */ + Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/ + uLong dosDate; + uLong crc32; + int encrypt; + int zip64; /* Add ZIP64 extened information in the extra field */ + ZPOS64_T pos_zip64extrainfo; + ZPOS64_T totalCompressedData; + ZPOS64_T totalUncompressedData; +#ifndef NOCRYPT + unsigned long keys[3]; /* keys defining the pseudo-random sequence */ + const z_crc_t* pcrc_32_tab; + int crypt_header_size; +#endif +} curfile64_info; + +typedef struct +{ + zlib_filefunc64_32_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + linkedlist_data central_dir;/* datablock with central dir in construction*/ + int in_opened_file_inzip; /* 1 if a file in the zip is currently writ.*/ + curfile64_info ci; /* info on the file curretly writing */ + + ZPOS64_T begin_pos; /* position of the beginning of the zipfile */ + ZPOS64_T add_position_when_writting_offset; + ZPOS64_T number_entry; + +#ifndef NO_ADDFILEINEXISTINGZIP + char *globalcomment; +#endif + +} zip64_internal; + + +#ifndef NOCRYPT +#define INCLUDECRYPTINGCODE_IFCRYPTALLOWED +#include "crypt.h" +#endif + +local linkedlist_datablock_internal* allocate_new_datablock() +{ + linkedlist_datablock_internal* ldi; + ldi = (linkedlist_datablock_internal*) + ALLOC(sizeof(linkedlist_datablock_internal)); + if (ldi!=NULL) + { + ldi->next_datablock = NULL ; + ldi->filled_in_this_block = 0 ; + ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ; + } + return ldi; +} + +local void free_datablock(linkedlist_datablock_internal* ldi) +{ + while (ldi!=NULL) + { + linkedlist_datablock_internal* ldinext = ldi->next_datablock; + TRYFREE(ldi); + ldi = ldinext; + } +} + +local void init_linkedlist(linkedlist_data* ll) +{ + ll->first_block = ll->last_block = NULL; +} + +local void free_linkedlist(linkedlist_data* ll) +{ + free_datablock(ll->first_block); + ll->first_block = ll->last_block = NULL; +} + + +local int add_data_in_datablock(linkedlist_data* ll, const void* buf, uLong len) +{ + linkedlist_datablock_internal* ldi; + const unsigned char* from_copy; + + if (ll==NULL) + return ZIP_INTERNALERROR; + + if (ll->last_block == NULL) + { + ll->first_block = ll->last_block = allocate_new_datablock(); + if (ll->first_block == NULL) + return ZIP_INTERNALERROR; + } + + ldi = ll->last_block; + from_copy = (unsigned char*)buf; + + while (len>0) + { + uInt copy_this; + uInt i; + unsigned char* to_copy; + + if (ldi->avail_in_this_block==0) + { + ldi->next_datablock = allocate_new_datablock(); + if (ldi->next_datablock == NULL) + return ZIP_INTERNALERROR; + ldi = ldi->next_datablock ; + ll->last_block = ldi; + } + + if (ldi->avail_in_this_block < len) + copy_this = (uInt)ldi->avail_in_this_block; + else + copy_this = (uInt)len; + + to_copy = &(ldi->data[ldi->filled_in_this_block]); + + for (i=0;ifilled_in_this_block += copy_this; + ldi->avail_in_this_block -= copy_this; + from_copy += copy_this ; + len -= copy_this; + } + return ZIP_OK; +} + + + +/****************************************************************************/ + +#ifndef NO_ADDFILEINEXISTINGZIP +/* =========================================================================== + Inputs a long in LSB order to the given file + nbByte == 1, 2 ,4 or 8 (byte, short or long, ZPOS64_T) +*/ + +local int zip64local_putValue OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T x, int nbByte)); +local int zip64local_putValue (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T x, int nbByte) +{ + unsigned char buf[8]; + int n; + for (n = 0; n < nbByte; n++) + { + buf[n] = (unsigned char)(x & 0xff); + x >>= 8; + } + if (x != 0) + { /* data overflow - hack for ZIP64 (X Roche) */ + for (n = 0; n < nbByte; n++) + { + buf[n] = 0xff; + } + } + + if (ZWRITE64(*pzlib_filefunc_def,filestream,buf,nbByte)!=(uLong)nbByte) + return ZIP_ERRNO; + else + return ZIP_OK; +} + +local void zip64local_putValue_inmemory OF((void* dest, ZPOS64_T x, int nbByte)); +local void zip64local_putValue_inmemory (void* dest, ZPOS64_T x, int nbByte) +{ + unsigned char* buf=(unsigned char*)dest; + int n; + for (n = 0; n < nbByte; n++) { + buf[n] = (unsigned char)(x & 0xff); + x >>= 8; + } + + if (x != 0) + { /* data overflow - hack for ZIP64 */ + for (n = 0; n < nbByte; n++) + { + buf[n] = 0xff; + } + } +} + +/****************************************************************************/ + + +local uLong zip64local_TmzDateToDosDate(const tm_zip* ptm) +{ + uLong year = (uLong)ptm->tm_year; + if (year>=1980) + year-=1980; + else if (year>=80) + year-=80; + return + (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) | + ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour)); +} + + +/****************************************************************************/ + +local int zip64local_getByte OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, int *pi)); + +local int zip64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def,voidpf filestream,int* pi) +{ + unsigned char c; + int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,&c,1); + if (err==1) + { + *pi = (int)c; + return ZIP_OK; + } + else + { + if (ZERROR64(*pzlib_filefunc_def,filestream)) + return ZIP_ERRNO; + else + return ZIP_EOF; + } +} + + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets +*/ +local int zip64local_getShort OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong *pX)); + +local int zip64local_getShort (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX) +{ + uLong x ; + int i = 0; + int err; + + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==ZIP_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int zip64local_getLong OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong *pX)); + +local int zip64local_getLong (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX) +{ + uLong x ; + int i = 0; + int err; + + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<16; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<24; + + if (err==ZIP_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int zip64local_getLong64 OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T *pX)); + + +local int zip64local_getLong64 (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T *pX) +{ + ZPOS64_T x; + int i = 0; + int err; + + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (ZPOS64_T)i; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<8; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<16; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<24; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<32; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<40; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<48; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<56; + + if (err==ZIP_OK) + *pX = x; + else + *pX = 0; + + return err; +} + +#ifndef BUFREADCOMMENT +#define BUFREADCOMMENT (0x400) +#endif +/* + Locate the Central directory of a zipfile (at the end, just before + the global comment) +*/ +local ZPOS64_T zip64local_SearchCentralDir OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)); + +local ZPOS64_T zip64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream) +{ + unsigned char* buf; + ZPOS64_T uSizeFile; + ZPOS64_T uBackRead; + ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */ + ZPOS64_T uPosFound=0; + + if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + + uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos); + if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + TRYFREE(buf); + return uPosFound; +} + +/* +Locate the End of Zip64 Central directory locator and from there find the CD of a zipfile (at the end, just before +the global comment) +*/ +local ZPOS64_T zip64local_SearchCentralDir64 OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)); + +local ZPOS64_T zip64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream) +{ + unsigned char* buf; + ZPOS64_T uSizeFile; + ZPOS64_T uBackRead; + ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */ + ZPOS64_T uPosFound=0; + uLong uL; + ZPOS64_T relativeOffset; + + if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos); + if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + { + // Signature "0x07064b50" Zip64 end of central directory locater + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && ((*(buf+i+2))==0x06) && ((*(buf+i+3))==0x07)) + { + uPosFound = uReadPos+i; + break; + } + } + + if (uPosFound!=0) + break; + } + + TRYFREE(buf); + if (uPosFound == 0) + return 0; + + /* Zip64 end of central directory locator */ + if (ZSEEK64(*pzlib_filefunc_def,filestream, uPosFound,ZLIB_FILEFUNC_SEEK_SET)!=0) + return 0; + + /* the signature, already checked */ + if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) + return 0; + + /* number of the disk with the start of the zip64 end of central directory */ + if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) + return 0; + if (uL != 0) + return 0; + + /* relative offset of the zip64 end of central directory record */ + if (zip64local_getLong64(pzlib_filefunc_def,filestream,&relativeOffset)!=ZIP_OK) + return 0; + + /* total number of disks */ + if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) + return 0; + if (uL != 1) + return 0; + + /* Goto Zip64 end of central directory record */ + if (ZSEEK64(*pzlib_filefunc_def,filestream, relativeOffset,ZLIB_FILEFUNC_SEEK_SET)!=0) + return 0; + + /* the signature */ + if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) + return 0; + + if (uL != 0x06064b50) // signature of 'Zip64 end of central directory' + return 0; + + return relativeOffset; +} + +int LoadCentralDirectoryRecord(zip64_internal* pziinit) +{ + int err=ZIP_OK; + ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + + ZPOS64_T size_central_dir; /* size of the central directory */ + ZPOS64_T offset_central_dir; /* offset of start of central directory */ + ZPOS64_T central_pos; + uLong uL; + + uLong number_disk; /* number of the current dist, used for + spaning ZIP, unsupported, always 0*/ + uLong number_disk_with_CD; /* number the the disk with central dir, used + for spaning ZIP, unsupported, always 0*/ + ZPOS64_T number_entry; + ZPOS64_T number_entry_CD; /* total number of entries in + the central dir + (same than number_entry on nospan) */ + uLong VersionMadeBy; + uLong VersionNeeded; + uLong size_comment; + + int hasZIP64Record = 0; + + // check first if we find a ZIP64 record + central_pos = zip64local_SearchCentralDir64(&pziinit->z_filefunc,pziinit->filestream); + if(central_pos > 0) + { + hasZIP64Record = 1; + } + else if(central_pos == 0) + { + central_pos = zip64local_SearchCentralDir(&pziinit->z_filefunc,pziinit->filestream); + } + +/* disable to allow appending to empty ZIP archive + if (central_pos==0) + err=ZIP_ERRNO; +*/ + + if(hasZIP64Record) + { + ZPOS64_T sizeEndOfCentralDirectory; + if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, central_pos, ZLIB_FILEFUNC_SEEK_SET) != 0) + err=ZIP_ERRNO; + + /* the signature, already checked */ + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&uL)!=ZIP_OK) + err=ZIP_ERRNO; + + /* size of zip64 end of central directory record */ + if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream, &sizeEndOfCentralDirectory)!=ZIP_OK) + err=ZIP_ERRNO; + + /* version made by */ + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &VersionMadeBy)!=ZIP_OK) + err=ZIP_ERRNO; + + /* version needed to extract */ + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &VersionNeeded)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of this disk */ + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&number_disk)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of the disk with the start of the central directory */ + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&number_disk_with_CD)!=ZIP_OK) + err=ZIP_ERRNO; + + /* total number of entries in the central directory on this disk */ + if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream, &number_entry)!=ZIP_OK) + err=ZIP_ERRNO; + + /* total number of entries in the central directory */ + if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&number_entry_CD)!=ZIP_OK) + err=ZIP_ERRNO; + + if ((number_entry_CD!=number_entry) || (number_disk_with_CD!=0) || (number_disk!=0)) + err=ZIP_BADZIPFILE; + + /* size of the central directory */ + if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&size_central_dir)!=ZIP_OK) + err=ZIP_ERRNO; + + /* offset of start of central directory with respect to the + starting disk number */ + if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&offset_central_dir)!=ZIP_OK) + err=ZIP_ERRNO; + + // TODO.. + // read the comment from the standard central header. + size_comment = 0; + } + else + { + // Read End of central Directory info + if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=ZIP_ERRNO; + + /* the signature, already checked */ + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&uL)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of this disk */ + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream,&number_disk)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of the disk with the start of the central directory */ + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream,&number_disk_with_CD)!=ZIP_OK) + err=ZIP_ERRNO; + + /* total number of entries in the central dir on this disk */ + number_entry = 0; + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) + err=ZIP_ERRNO; + else + number_entry = uL; + + /* total number of entries in the central dir */ + number_entry_CD = 0; + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) + err=ZIP_ERRNO; + else + number_entry_CD = uL; + + if ((number_entry_CD!=number_entry) || (number_disk_with_CD!=0) || (number_disk!=0)) + err=ZIP_BADZIPFILE; + + /* size of the central directory */ + size_central_dir = 0; + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) + err=ZIP_ERRNO; + else + size_central_dir = uL; + + /* offset of start of central directory with respect to the starting disk number */ + offset_central_dir = 0; + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) + err=ZIP_ERRNO; + else + offset_central_dir = uL; + + + /* zipfile global comment length */ + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &size_comment)!=ZIP_OK) + err=ZIP_ERRNO; + } + + if ((central_posz_filefunc, pziinit->filestream); + return ZIP_ERRNO; + } + + if (size_comment>0) + { + pziinit->globalcomment = (char*)ALLOC(size_comment+1); + if (pziinit->globalcomment) + { + size_comment = ZREAD64(pziinit->z_filefunc, pziinit->filestream, pziinit->globalcomment,size_comment); + pziinit->globalcomment[size_comment]=0; + } + } + + byte_before_the_zipfile = central_pos - (offset_central_dir+size_central_dir); + pziinit->add_position_when_writting_offset = byte_before_the_zipfile; + + { + ZPOS64_T size_central_dir_to_read = size_central_dir; + size_t buf_size = SIZEDATA_INDATABLOCK; + void* buf_read = (void*)ALLOC(buf_size); + if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, offset_central_dir + byte_before_the_zipfile, ZLIB_FILEFUNC_SEEK_SET) != 0) + err=ZIP_ERRNO; + + while ((size_central_dir_to_read>0) && (err==ZIP_OK)) + { + ZPOS64_T read_this = SIZEDATA_INDATABLOCK; + if (read_this > size_central_dir_to_read) + read_this = size_central_dir_to_read; + + if (ZREAD64(pziinit->z_filefunc, pziinit->filestream,buf_read,(uLong)read_this) != read_this) + err=ZIP_ERRNO; + + if (err==ZIP_OK) + err = add_data_in_datablock(&pziinit->central_dir,buf_read, (uLong)read_this); + + size_central_dir_to_read-=read_this; + } + TRYFREE(buf_read); + } + pziinit->begin_pos = byte_before_the_zipfile; + pziinit->number_entry = number_entry_CD; + + if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, offset_central_dir+byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET) != 0) + err=ZIP_ERRNO; + + return err; +} + + +#endif /* !NO_ADDFILEINEXISTINGZIP*/ + + +/************************************************************/ +extern zipFile ZEXPORT zipOpen3 (const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_32_def* pzlib_filefunc64_32_def) +{ + zip64_internal ziinit; + zip64_internal* zi; + int err=ZIP_OK; + + ziinit.z_filefunc.zseek32_file = NULL; + ziinit.z_filefunc.ztell32_file = NULL; + if (pzlib_filefunc64_32_def==NULL) + fill_fopen64_filefunc(&ziinit.z_filefunc.zfile_func64); + else + ziinit.z_filefunc = *pzlib_filefunc64_32_def; + + ziinit.filestream = ZOPEN64(ziinit.z_filefunc, + pathname, + (append == APPEND_STATUS_CREATE) ? + (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_CREATE) : + (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_EXISTING)); + + if (ziinit.filestream == NULL) + return NULL; + + if (append == APPEND_STATUS_CREATEAFTER) + ZSEEK64(ziinit.z_filefunc,ziinit.filestream,0,SEEK_END); + + ziinit.begin_pos = ZTELL64(ziinit.z_filefunc,ziinit.filestream); + ziinit.in_opened_file_inzip = 0; + ziinit.ci.stream_initialised = 0; + ziinit.number_entry = 0; + ziinit.add_position_when_writting_offset = 0; + init_linkedlist(&(ziinit.central_dir)); + + + + zi = (zip64_internal*)ALLOC(sizeof(zip64_internal)); + if (zi==NULL) + { + ZCLOSE64(ziinit.z_filefunc,ziinit.filestream); + return NULL; + } + + /* now we add file in a zipfile */ +# ifndef NO_ADDFILEINEXISTINGZIP + ziinit.globalcomment = NULL; + if (append == APPEND_STATUS_ADDINZIP) + { + // Read and Cache Central Directory Records + err = LoadCentralDirectoryRecord(&ziinit); + } + + if (globalcomment) + { + *globalcomment = ziinit.globalcomment; + } +# endif /* !NO_ADDFILEINEXISTINGZIP*/ + + if (err != ZIP_OK) + { +# ifndef NO_ADDFILEINEXISTINGZIP + TRYFREE(ziinit.globalcomment); +# endif /* !NO_ADDFILEINEXISTINGZIP*/ + TRYFREE(zi); + return NULL; + } + else + { + *zi = ziinit; + return (zipFile)zi; + } +} + +extern zipFile ZEXPORT zipOpen2 (const char *pathname, int append, zipcharpc* globalcomment, zlib_filefunc_def* pzlib_filefunc32_def) +{ + if (pzlib_filefunc32_def != NULL) + { + zlib_filefunc64_32_def zlib_filefunc64_32_def_fill; + fill_zlib_filefunc64_32_def_from_filefunc32(&zlib_filefunc64_32_def_fill,pzlib_filefunc32_def); + return zipOpen3(pathname, append, globalcomment, &zlib_filefunc64_32_def_fill); + } + else + return zipOpen3(pathname, append, globalcomment, NULL); +} + +extern zipFile ZEXPORT zipOpen2_64 (const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_def* pzlib_filefunc_def) +{ + if (pzlib_filefunc_def != NULL) + { + zlib_filefunc64_32_def zlib_filefunc64_32_def_fill; + zlib_filefunc64_32_def_fill.zfile_func64 = *pzlib_filefunc_def; + zlib_filefunc64_32_def_fill.ztell32_file = NULL; + zlib_filefunc64_32_def_fill.zseek32_file = NULL; + return zipOpen3(pathname, append, globalcomment, &zlib_filefunc64_32_def_fill); + } + else + return zipOpen3(pathname, append, globalcomment, NULL); +} + + + +extern zipFile ZEXPORT zipOpen (const char* pathname, int append) +{ + return zipOpen3((const void*)pathname,append,NULL,NULL); +} + +extern zipFile ZEXPORT zipOpen64 (const void* pathname, int append) +{ + return zipOpen3(pathname,append,NULL,NULL); +} + +int Write_LocalFileHeader(zip64_internal* zi, const char* filename, uInt size_extrafield_local, const void* extrafield_local) +{ + /* write the local header */ + int err; + uInt size_filename = (uInt)strlen(filename); + uInt size_extrafield = size_extrafield_local; + + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)LOCALHEADERMAGIC, 4); + + if (err==ZIP_OK) + { + if(zi->ci.zip64) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2);/* version needed to extract */ + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)20,2);/* version needed to extract */ + } + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.flag,2); + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.method,2); + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.dosDate,4); + + // CRC / Compressed size / Uncompressed size will be filled in later and rewritten later + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* crc 32, unknown */ + if (err==ZIP_OK) + { + if(zi->ci.zip64) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xFFFFFFFF,4); /* compressed size, unknown */ + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* compressed size, unknown */ + } + if (err==ZIP_OK) + { + if(zi->ci.zip64) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xFFFFFFFF,4); /* uncompressed size, unknown */ + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* uncompressed size, unknown */ + } + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_filename,2); + + if(zi->ci.zip64) + { + size_extrafield += 20; + } + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_extrafield,2); + + if ((err==ZIP_OK) && (size_filename > 0)) + { + if (ZWRITE64(zi->z_filefunc,zi->filestream,filename,size_filename)!=size_filename) + err = ZIP_ERRNO; + } + + if ((err==ZIP_OK) && (size_extrafield_local > 0)) + { + if (ZWRITE64(zi->z_filefunc, zi->filestream, extrafield_local, size_extrafield_local) != size_extrafield_local) + err = ZIP_ERRNO; + } + + + if ((err==ZIP_OK) && (zi->ci.zip64)) + { + // write the Zip64 extended info + short HeaderID = 1; + short DataSize = 16; + ZPOS64_T CompressedSize = 0; + ZPOS64_T UncompressedSize = 0; + + // Remember position of Zip64 extended info for the local file header. (needed when we update size after done with file) + zi->ci.pos_zip64extrainfo = ZTELL64(zi->z_filefunc,zi->filestream); + + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (short)HeaderID,2); + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (short)DataSize,2); + + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)UncompressedSize,8); + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)CompressedSize,8); + } + + return err; +} + +/* + NOTE. + When writing RAW the ZIP64 extended information in extrafield_local and extrafield_global needs to be stripped + before calling this function it can be done with zipRemoveExtraInfoBlock + + It is not done here because then we need to realloc a new buffer since parameters are 'const' and I want to minimize + unnecessary allocations. + */ +extern int ZEXPORT zipOpenNewFileInZip4_64 (zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw, + int windowBits,int memLevel, int strategy, + const char* password, uLong crcForCrypting, + uLong versionMadeBy, uLong flagBase, int zip64) +{ + zip64_internal* zi; + uInt size_filename; + uInt size_comment; + uInt i; + int err = ZIP_OK; + +# ifdef NOCRYPT + (crcForCrypting); + if (password != NULL) + return ZIP_PARAMERROR; +# endif + + if (file == NULL) + return ZIP_PARAMERROR; + +#ifdef HAVE_BZIP2 + if ((method!=0) && (method!=Z_DEFLATED) && (method!=Z_BZIP2ED)) + return ZIP_PARAMERROR; +#else + if ((method!=0) && (method!=Z_DEFLATED)) + return ZIP_PARAMERROR; +#endif + + zi = (zip64_internal*)file; + + if (zi->in_opened_file_inzip == 1) + { + err = zipCloseFileInZip (file); + if (err != ZIP_OK) + return err; + } + + if (filename==NULL) + filename="-"; + + if (comment==NULL) + size_comment = 0; + else + size_comment = (uInt)strlen(comment); + + size_filename = (uInt)strlen(filename); + + if (zipfi == NULL) + zi->ci.dosDate = 0; + else + { + if (zipfi->dosDate != 0) + zi->ci.dosDate = zipfi->dosDate; + else + zi->ci.dosDate = zip64local_TmzDateToDosDate(&zipfi->tmz_date); + } + + zi->ci.flag = flagBase; + if ((level==8) || (level==9)) + zi->ci.flag |= 2; + if (level==2) + zi->ci.flag |= 4; + if (level==1) + zi->ci.flag |= 6; + if (password != NULL) + zi->ci.flag |= 1; + + zi->ci.crc32 = 0; + zi->ci.method = method; + zi->ci.encrypt = 0; + zi->ci.stream_initialised = 0; + zi->ci.pos_in_buffered_data = 0; + zi->ci.raw = raw; + zi->ci.pos_local_header = ZTELL64(zi->z_filefunc,zi->filestream); + + zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename + size_extrafield_global + size_comment; + zi->ci.size_centralExtraFree = 32; // Extra space we have reserved in case we need to add ZIP64 extra info data + + zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader + zi->ci.size_centralExtraFree); + + zi->ci.size_centralExtra = size_extrafield_global; + zip64local_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4); + /* version info */ + zip64local_putValue_inmemory(zi->ci.central_header+4,(uLong)versionMadeBy,2); + zip64local_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2); + zip64local_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2); + zip64local_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2); + zip64local_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4); + zip64local_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/ + zip64local_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/ + zip64local_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/ + zip64local_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2); + zip64local_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2); + zip64local_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2); + zip64local_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/ + + if (zipfi==NULL) + zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2); + else + zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2); + + if (zipfi==NULL) + zip64local_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4); + else + zip64local_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4); + + if(zi->ci.pos_local_header >= 0xffffffff) + zip64local_putValue_inmemory(zi->ci.central_header+42,(uLong)0xffffffff,4); + else + zip64local_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header - zi->add_position_when_writting_offset,4); + + for (i=0;ici.central_header+SIZECENTRALHEADER+i) = *(filename+i); + + for (i=0;ici.central_header+SIZECENTRALHEADER+size_filename+i) = + *(((const char*)extrafield_global)+i); + + for (i=0;ici.central_header+SIZECENTRALHEADER+size_filename+ + size_extrafield_global+i) = *(comment+i); + if (zi->ci.central_header == NULL) + return ZIP_INTERNALERROR; + + zi->ci.zip64 = zip64; + zi->ci.totalCompressedData = 0; + zi->ci.totalUncompressedData = 0; + zi->ci.pos_zip64extrainfo = 0; + + err = Write_LocalFileHeader(zi, filename, size_extrafield_local, extrafield_local); + +#ifdef HAVE_BZIP2 + zi->ci.bstream.avail_in = (uInt)0; + zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.bstream.next_out = (char*)zi->ci.buffered_data; + zi->ci.bstream.total_in_hi32 = 0; + zi->ci.bstream.total_in_lo32 = 0; + zi->ci.bstream.total_out_hi32 = 0; + zi->ci.bstream.total_out_lo32 = 0; +#endif + + zi->ci.stream.avail_in = (uInt)0; + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + zi->ci.stream.total_in = 0; + zi->ci.stream.total_out = 0; + zi->ci.stream.data_type = Z_BINARY; + +#ifdef HAVE_BZIP2 + if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED || zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) +#else + if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) +#endif + { + if(zi->ci.method == Z_DEFLATED) + { + zi->ci.stream.zalloc = (alloc_func)0; + zi->ci.stream.zfree = (free_func)0; + zi->ci.stream.opaque = (voidpf)0; + + if (windowBits>0) + windowBits = -windowBits; + + err = deflateInit2(&zi->ci.stream, level, Z_DEFLATED, windowBits, memLevel, strategy); + + if (err==Z_OK) + zi->ci.stream_initialised = Z_DEFLATED; + } + else if(zi->ci.method == Z_BZIP2ED) + { +#ifdef HAVE_BZIP2 + // Init BZip stuff here + zi->ci.bstream.bzalloc = 0; + zi->ci.bstream.bzfree = 0; + zi->ci.bstream.opaque = (voidpf)0; + + err = BZ2_bzCompressInit(&zi->ci.bstream, level, 0,35); + if(err == BZ_OK) + zi->ci.stream_initialised = Z_BZIP2ED; +#endif + } + + } + +# ifndef NOCRYPT + zi->ci.crypt_header_size = 0; + if ((err==Z_OK) && (password != NULL)) + { + unsigned char bufHead[RAND_HEAD_LEN]; + unsigned int sizeHead; + zi->ci.encrypt = 1; + zi->ci.pcrc_32_tab = get_crc_table(); + /*init_keys(password,zi->ci.keys,zi->ci.pcrc_32_tab);*/ + + sizeHead=crypthead(password,bufHead,RAND_HEAD_LEN,zi->ci.keys,zi->ci.pcrc_32_tab,crcForCrypting); + zi->ci.crypt_header_size = sizeHead; + + if (ZWRITE64(zi->z_filefunc,zi->filestream,bufHead,sizeHead) != sizeHead) + err = ZIP_ERRNO; + } +# endif + + if (err==Z_OK) + zi->in_opened_file_inzip = 1; + return err; +} + +extern int ZEXPORT zipOpenNewFileInZip4 (zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw, + int windowBits,int memLevel, int strategy, + const char* password, uLong crcForCrypting, + uLong versionMadeBy, uLong flagBase) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + windowBits, memLevel, strategy, + password, crcForCrypting, versionMadeBy, flagBase, 0); +} + +extern int ZEXPORT zipOpenNewFileInZip3 (zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw, + int windowBits,int memLevel, int strategy, + const char* password, uLong crcForCrypting) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + windowBits, memLevel, strategy, + password, crcForCrypting, VERSIONMADEBY, 0, 0); +} + +extern int ZEXPORT zipOpenNewFileInZip3_64(zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw, + int windowBits,int memLevel, int strategy, + const char* password, uLong crcForCrypting, int zip64) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + windowBits, memLevel, strategy, + password, crcForCrypting, VERSIONMADEBY, 0, zip64); +} + +extern int ZEXPORT zipOpenNewFileInZip2(zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + NULL, 0, VERSIONMADEBY, 0, 0); +} + +extern int ZEXPORT zipOpenNewFileInZip2_64(zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw, int zip64) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + NULL, 0, VERSIONMADEBY, 0, zip64); +} + +extern int ZEXPORT zipOpenNewFileInZip64 (zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void*extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int zip64) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, 0, + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + NULL, 0, VERSIONMADEBY, 0, zip64); +} + +extern int ZEXPORT zipOpenNewFileInZip (zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void*extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, 0, + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + NULL, 0, VERSIONMADEBY, 0, 0); +} + +local int zip64FlushWriteBuffer(zip64_internal* zi) +{ + int err=ZIP_OK; + + if (zi->ci.encrypt != 0) + { +#ifndef NOCRYPT + uInt i; + int t; + for (i=0;ici.pos_in_buffered_data;i++) + zi->ci.buffered_data[i] = zencode(zi->ci.keys, zi->ci.pcrc_32_tab, zi->ci.buffered_data[i],t); +#endif + } + + if (ZWRITE64(zi->z_filefunc,zi->filestream,zi->ci.buffered_data,zi->ci.pos_in_buffered_data) != zi->ci.pos_in_buffered_data) + err = ZIP_ERRNO; + + zi->ci.totalCompressedData += zi->ci.pos_in_buffered_data; + +#ifdef HAVE_BZIP2 + if(zi->ci.method == Z_BZIP2ED) + { + zi->ci.totalUncompressedData += zi->ci.bstream.total_in_lo32; + zi->ci.bstream.total_in_lo32 = 0; + zi->ci.bstream.total_in_hi32 = 0; + } + else +#endif + { + zi->ci.totalUncompressedData += zi->ci.stream.total_in; + zi->ci.stream.total_in = 0; + } + + + zi->ci.pos_in_buffered_data = 0; + + return err; +} + +extern int ZEXPORT zipWriteInFileInZip (zipFile file,const void* buf,unsigned int len) +{ + zip64_internal* zi; + int err=ZIP_OK; + + if (file == NULL) + return ZIP_PARAMERROR; + zi = (zip64_internal*)file; + + if (zi->in_opened_file_inzip == 0) + return ZIP_PARAMERROR; + + zi->ci.crc32 = crc32(zi->ci.crc32,buf,(uInt)len); + +#ifdef HAVE_BZIP2 + if(zi->ci.method == Z_BZIP2ED && (!zi->ci.raw)) + { + zi->ci.bstream.next_in = (void*)buf; + zi->ci.bstream.avail_in = len; + err = BZ_RUN_OK; + + while ((err==BZ_RUN_OK) && (zi->ci.bstream.avail_in>0)) + { + if (zi->ci.bstream.avail_out == 0) + { + if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) + err = ZIP_ERRNO; + zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.bstream.next_out = (char*)zi->ci.buffered_data; + } + + + if(err != BZ_RUN_OK) + break; + + if ((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) + { + uLong uTotalOutBefore_lo = zi->ci.bstream.total_out_lo32; +// uLong uTotalOutBefore_hi = zi->ci.bstream.total_out_hi32; + err=BZ2_bzCompress(&zi->ci.bstream, BZ_RUN); + + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.bstream.total_out_lo32 - uTotalOutBefore_lo) ; + } + } + + if(err == BZ_RUN_OK) + err = ZIP_OK; + } + else +#endif + { + zi->ci.stream.next_in = (Bytef*)buf; + zi->ci.stream.avail_in = len; + + while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0)) + { + if (zi->ci.stream.avail_out == 0) + { + if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) + err = ZIP_ERRNO; + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + } + + + if(err != ZIP_OK) + break; + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + uLong uTotalOutBefore = zi->ci.stream.total_out; + err=deflate(&zi->ci.stream, Z_NO_FLUSH); + if(uTotalOutBefore > zi->ci.stream.total_out) + { + int bBreak = 0; + bBreak++; + } + + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ; + } + else + { + uInt copy_this,i; + if (zi->ci.stream.avail_in < zi->ci.stream.avail_out) + copy_this = zi->ci.stream.avail_in; + else + copy_this = zi->ci.stream.avail_out; + + for (i = 0; i < copy_this; i++) + *(((char*)zi->ci.stream.next_out)+i) = + *(((const char*)zi->ci.stream.next_in)+i); + { + zi->ci.stream.avail_in -= copy_this; + zi->ci.stream.avail_out-= copy_this; + zi->ci.stream.next_in+= copy_this; + zi->ci.stream.next_out+= copy_this; + zi->ci.stream.total_in+= copy_this; + zi->ci.stream.total_out+= copy_this; + zi->ci.pos_in_buffered_data += copy_this; + } + } + }// while(...) + } + + return err; +} + +extern int ZEXPORT zipCloseFileInZipRaw (zipFile file, uLong uncompressed_size, uLong crc32) +{ + return zipCloseFileInZipRaw64 (file, uncompressed_size, crc32); +} + +extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_size, uLong crc32) +{ + zip64_internal* zi; + ZPOS64_T compressed_size; + uLong invalidValue = 0xffffffff; + short datasize = 0; + int err=ZIP_OK; + + if (file == NULL) + return ZIP_PARAMERROR; + zi = (zip64_internal*)file; + + if (zi->in_opened_file_inzip == 0) + return ZIP_PARAMERROR; + zi->ci.stream.avail_in = 0; + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + while (err==ZIP_OK) + { + uLong uTotalOutBefore; + if (zi->ci.stream.avail_out == 0) + { + if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) + err = ZIP_ERRNO; + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + } + uTotalOutBefore = zi->ci.stream.total_out; + err=deflate(&zi->ci.stream, Z_FINISH); + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ; + } + } + else if ((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) + { +#ifdef HAVE_BZIP2 + err = BZ_FINISH_OK; + while (err==BZ_FINISH_OK) + { + uLong uTotalOutBefore; + if (zi->ci.bstream.avail_out == 0) + { + if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) + err = ZIP_ERRNO; + zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.bstream.next_out = (char*)zi->ci.buffered_data; + } + uTotalOutBefore = zi->ci.bstream.total_out_lo32; + err=BZ2_bzCompress(&zi->ci.bstream, BZ_FINISH); + if(err == BZ_STREAM_END) + err = Z_STREAM_END; + + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.bstream.total_out_lo32 - uTotalOutBefore); + } + + if(err == BZ_FINISH_OK) + err = ZIP_OK; +#endif + } + + if (err==Z_STREAM_END) + err=ZIP_OK; /* this is normal */ + + if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK)) + { + if (zip64FlushWriteBuffer(zi)==ZIP_ERRNO) + err = ZIP_ERRNO; + } + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + int tmp_err = deflateEnd(&zi->ci.stream); + if (err == ZIP_OK) + err = tmp_err; + zi->ci.stream_initialised = 0; + } +#ifdef HAVE_BZIP2 + else if((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) + { + int tmperr = BZ2_bzCompressEnd(&zi->ci.bstream); + if (err==ZIP_OK) + err = tmperr; + zi->ci.stream_initialised = 0; + } +#endif + + if (!zi->ci.raw) + { + crc32 = (uLong)zi->ci.crc32; + uncompressed_size = zi->ci.totalUncompressedData; + } + compressed_size = zi->ci.totalCompressedData; + +# ifndef NOCRYPT + compressed_size += zi->ci.crypt_header_size; +# endif + + // update Current Item crc and sizes, + if(compressed_size >= 0xffffffff || uncompressed_size >= 0xffffffff || zi->ci.pos_local_header >= 0xffffffff) + { + /*version Made by*/ + zip64local_putValue_inmemory(zi->ci.central_header+4,(uLong)45,2); + /*version needed*/ + zip64local_putValue_inmemory(zi->ci.central_header+6,(uLong)45,2); + + } + + zip64local_putValue_inmemory(zi->ci.central_header+16,crc32,4); /*crc*/ + + + if(compressed_size >= 0xffffffff) + zip64local_putValue_inmemory(zi->ci.central_header+20, invalidValue,4); /*compr size*/ + else + zip64local_putValue_inmemory(zi->ci.central_header+20, compressed_size,4); /*compr size*/ + + /// set internal file attributes field + if (zi->ci.stream.data_type == Z_ASCII) + zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)Z_ASCII,2); + + if(uncompressed_size >= 0xffffffff) + zip64local_putValue_inmemory(zi->ci.central_header+24, invalidValue,4); /*uncompr size*/ + else + zip64local_putValue_inmemory(zi->ci.central_header+24, uncompressed_size,4); /*uncompr size*/ + + // Add ZIP64 extra info field for uncompressed size + if(uncompressed_size >= 0xffffffff) + datasize += 8; + + // Add ZIP64 extra info field for compressed size + if(compressed_size >= 0xffffffff) + datasize += 8; + + // Add ZIP64 extra info field for relative offset to local file header of current file + if(zi->ci.pos_local_header >= 0xffffffff) + datasize += 8; + + if(datasize > 0) + { + char* p = NULL; + + if((uLong)(datasize + 4) > zi->ci.size_centralExtraFree) + { + // we can not write more data to the buffer that we have room for. + return ZIP_BADZIPFILE; + } + + p = zi->ci.central_header + zi->ci.size_centralheader; + + // Add Extra Information Header for 'ZIP64 information' + zip64local_putValue_inmemory(p, 0x0001, 2); // HeaderID + p += 2; + zip64local_putValue_inmemory(p, datasize, 2); // DataSize + p += 2; + + if(uncompressed_size >= 0xffffffff) + { + zip64local_putValue_inmemory(p, uncompressed_size, 8); + p += 8; + } + + if(compressed_size >= 0xffffffff) + { + zip64local_putValue_inmemory(p, compressed_size, 8); + p += 8; + } + + if(zi->ci.pos_local_header >= 0xffffffff) + { + zip64local_putValue_inmemory(p, zi->ci.pos_local_header, 8); + p += 8; + } + + // Update how much extra free space we got in the memory buffer + // and increase the centralheader size so the new ZIP64 fields are included + // ( 4 below is the size of HeaderID and DataSize field ) + zi->ci.size_centralExtraFree -= datasize + 4; + zi->ci.size_centralheader += datasize + 4; + + // Update the extra info size field + zi->ci.size_centralExtra += datasize + 4; + zip64local_putValue_inmemory(zi->ci.central_header+30,(uLong)zi->ci.size_centralExtra,2); + } + + if (err==ZIP_OK) + err = add_data_in_datablock(&zi->central_dir, zi->ci.central_header, (uLong)zi->ci.size_centralheader); + + free(zi->ci.central_header); + + if (err==ZIP_OK) + { + // Update the LocalFileHeader with the new values. + + ZPOS64_T cur_pos_inzip = ZTELL64(zi->z_filefunc,zi->filestream); + + if (ZSEEK64(zi->z_filefunc,zi->filestream, zi->ci.pos_local_header + 14,ZLIB_FILEFUNC_SEEK_SET)!=0) + err = ZIP_ERRNO; + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,crc32,4); /* crc 32, unknown */ + + if(uncompressed_size >= 0xffffffff || compressed_size >= 0xffffffff ) + { + if(zi->ci.pos_zip64extrainfo > 0) + { + // Update the size in the ZIP64 extended field. + if (ZSEEK64(zi->z_filefunc,zi->filestream, zi->ci.pos_zip64extrainfo + 4,ZLIB_FILEFUNC_SEEK_SET)!=0) + err = ZIP_ERRNO; + + if (err==ZIP_OK) /* compressed size, unknown */ + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, uncompressed_size, 8); + + if (err==ZIP_OK) /* uncompressed size, unknown */ + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, compressed_size, 8); + } + else + err = ZIP_BADZIPFILE; // Caller passed zip64 = 0, so no room for zip64 info -> fatal + } + else + { + if (err==ZIP_OK) /* compressed size, unknown */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,compressed_size,4); + + if (err==ZIP_OK) /* uncompressed size, unknown */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,uncompressed_size,4); + } + + if (ZSEEK64(zi->z_filefunc,zi->filestream, cur_pos_inzip,ZLIB_FILEFUNC_SEEK_SET)!=0) + err = ZIP_ERRNO; + } + + zi->number_entry ++; + zi->in_opened_file_inzip = 0; + + return err; +} + +extern int ZEXPORT zipCloseFileInZip (zipFile file) +{ + return zipCloseFileInZipRaw (file,0,0); +} + +int Write_Zip64EndOfCentralDirectoryLocator(zip64_internal* zi, ZPOS64_T zip64eocd_pos_inzip) +{ + int err = ZIP_OK; + ZPOS64_T pos = zip64eocd_pos_inzip - zi->add_position_when_writting_offset; + + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ZIP64ENDLOCHEADERMAGIC,4); + + /*num disks*/ + if (err==ZIP_OK) /* number of the disk with the start of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); + + /*relative offset*/ + if (err==ZIP_OK) /* Relative offset to the Zip64EndOfCentralDirectory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream, pos,8); + + /*total disks*/ /* Do not support spawning of disk so always say 1 here*/ + if (err==ZIP_OK) /* number of the disk with the start of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)1,4); + + return err; +} + +int Write_Zip64EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip) +{ + int err = ZIP_OK; + + uLong Zip64DataSize = 44; + + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ZIP64ENDHEADERMAGIC,4); + + if (err==ZIP_OK) /* size of this 'zip64 end of central directory' */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(ZPOS64_T)Zip64DataSize,8); // why ZPOS64_T of this ? + + if (err==ZIP_OK) /* version made by */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2); + + if (err==ZIP_OK) /* version needed */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2); + + if (err==ZIP_OK) /* number of this disk */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); + + if (err==ZIP_OK) /* number of the disk with the start of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); + + if (err==ZIP_OK) /* total number of entries in the central dir on this disk */ + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, zi->number_entry, 8); + + if (err==ZIP_OK) /* total number of entries in the central dir */ + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, zi->number_entry, 8); + + if (err==ZIP_OK) /* size of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(ZPOS64_T)size_centraldir,8); + + if (err==ZIP_OK) /* offset of start of central directory with respect to the starting disk number */ + { + ZPOS64_T pos = centraldir_pos_inzip - zi->add_position_when_writting_offset; + err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (ZPOS64_T)pos,8); + } + return err; +} +int Write_EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip) +{ + int err = ZIP_OK; + + /*signature*/ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ENDHEADERMAGIC,4); + + if (err==ZIP_OK) /* number of this disk */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2); + + if (err==ZIP_OK) /* number of the disk with the start of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2); + + if (err==ZIP_OK) /* total number of entries in the central dir on this disk */ + { + { + if(zi->number_entry >= 0xFFFF) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xffff,2); // use value in ZIP64 record + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2); + } + } + + if (err==ZIP_OK) /* total number of entries in the central dir */ + { + if(zi->number_entry >= 0xFFFF) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xffff,2); // use value in ZIP64 record + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2); + } + + if (err==ZIP_OK) /* size of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_centraldir,4); + + if (err==ZIP_OK) /* offset of start of central directory with respect to the starting disk number */ + { + ZPOS64_T pos = centraldir_pos_inzip - zi->add_position_when_writting_offset; + if(pos >= 0xffffffff) + { + err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)0xffffffff,4); + } + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4); + } + + return err; +} + +int Write_GlobalComment(zip64_internal* zi, const char* global_comment) +{ + int err = ZIP_OK; + uInt size_global_comment = 0; + + if(global_comment != NULL) + size_global_comment = (uInt)strlen(global_comment); + + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_global_comment,2); + + if (err == ZIP_OK && size_global_comment > 0) + { + if (ZWRITE64(zi->z_filefunc,zi->filestream, global_comment, size_global_comment) != size_global_comment) + err = ZIP_ERRNO; + } + return err; +} + +extern int ZEXPORT zipClose (zipFile file, const char* global_comment) +{ + zip64_internal* zi; + int err = 0; + uLong size_centraldir = 0; + ZPOS64_T centraldir_pos_inzip; + ZPOS64_T pos; + + if (file == NULL) + return ZIP_PARAMERROR; + + zi = (zip64_internal*)file; + + if (zi->in_opened_file_inzip == 1) + { + err = zipCloseFileInZip (file); + } + +#ifndef NO_ADDFILEINEXISTINGZIP + if (global_comment==NULL) + global_comment = zi->globalcomment; +#endif + + centraldir_pos_inzip = ZTELL64(zi->z_filefunc,zi->filestream); + + if (err==ZIP_OK) + { + linkedlist_datablock_internal* ldi = zi->central_dir.first_block; + while (ldi!=NULL) + { + if ((err==ZIP_OK) && (ldi->filled_in_this_block>0)) + { + if (ZWRITE64(zi->z_filefunc,zi->filestream, ldi->data, ldi->filled_in_this_block) != ldi->filled_in_this_block) + err = ZIP_ERRNO; + } + + size_centraldir += ldi->filled_in_this_block; + ldi = ldi->next_datablock; + } + } + free_linkedlist(&(zi->central_dir)); + + pos = centraldir_pos_inzip - zi->add_position_when_writting_offset; + if(pos >= 0xffffffff || zi->number_entry > 0xFFFF) + { + ZPOS64_T Zip64EOCDpos = ZTELL64(zi->z_filefunc,zi->filestream); + Write_Zip64EndOfCentralDirectoryRecord(zi, size_centraldir, centraldir_pos_inzip); + + Write_Zip64EndOfCentralDirectoryLocator(zi, Zip64EOCDpos); + } + + if (err==ZIP_OK) + err = Write_EndOfCentralDirectoryRecord(zi, size_centraldir, centraldir_pos_inzip); + + if(err == ZIP_OK) + err = Write_GlobalComment(zi, global_comment); + + if (ZCLOSE64(zi->z_filefunc,zi->filestream) != 0) + if (err == ZIP_OK) + err = ZIP_ERRNO; + +#ifndef NO_ADDFILEINEXISTINGZIP + TRYFREE(zi->globalcomment); +#endif + TRYFREE(zi); + + return err; +} + +extern int ZEXPORT zipRemoveExtraInfoBlock (char* pData, int* dataLen, short sHeader) +{ + char* p = pData; + int size = 0; + char* pNewHeader; + char* pTmp; + short header; + short dataSize; + + int retVal = ZIP_OK; + + if(pData == NULL || *dataLen < 4) + return ZIP_PARAMERROR; + + pNewHeader = (char*)ALLOC(*dataLen); + pTmp = pNewHeader; + + while(p < (pData + *dataLen)) + { + header = *(short*)p; + dataSize = *(((short*)p)+1); + + if( header == sHeader ) // Header found. + { + p += dataSize + 4; // skip it. do not copy to temp buffer + } + else + { + // Extra Info block should not be removed, So copy it to the temp buffer. + memcpy(pTmp, p, dataSize + 4); + p += dataSize + 4; + size += dataSize + 4; + } + + } + + if(size < *dataLen) + { + // clean old extra info block. + memset(pData,0, *dataLen); + + // copy the new extra info block over the old + if(size > 0) + memcpy(pData, pNewHeader, size); + + // set the new extra info size + *dataLen = size; + + retVal = ZIP_OK; + } + else + retVal = ZIP_ERRNO; + + TRYFREE(pNewHeader); + + return retVal; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/minizip/zip.h b/src/SDL2/external/zlib-1.2.8/contrib/minizip/zip.h new file mode 100644 index 000000000..8aaebb623 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/minizip/zip.h @@ -0,0 +1,362 @@ +/* zip.h -- IO on .zip files using zlib + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + + --------------------------------------------------------------------------- + + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + --------------------------------------------------------------------------- + + Changes + + See header of zip.h + +*/ + +#ifndef _zip12_H +#define _zip12_H + +#ifdef __cplusplus +extern "C" { +#endif + +//#define HAVE_BZIP2 + +#ifndef _ZLIB_H +#include "zlib.h" +#endif + +#ifndef _ZLIBIOAPI_H +#include "ioapi.h" +#endif + +#ifdef HAVE_BZIP2 +#include "bzlib.h" +#endif + +#define Z_BZIP2ED 12 + +#if defined(STRICTZIP) || defined(STRICTZIPUNZIP) +/* like the STRICT of WIN32, we define a pointer that cannot be converted + from (void*) without cast */ +typedef struct TagzipFile__ { int unused; } zipFile__; +typedef zipFile__ *zipFile; +#else +typedef voidp zipFile; +#endif + +#define ZIP_OK (0) +#define ZIP_EOF (0) +#define ZIP_ERRNO (Z_ERRNO) +#define ZIP_PARAMERROR (-102) +#define ZIP_BADZIPFILE (-103) +#define ZIP_INTERNALERROR (-104) + +#ifndef DEF_MEM_LEVEL +# if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +# else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +# endif +#endif +/* default memLevel */ + +/* tm_zip contain date/time info */ +typedef struct tm_zip_s +{ + uInt tm_sec; /* seconds after the minute - [0,59] */ + uInt tm_min; /* minutes after the hour - [0,59] */ + uInt tm_hour; /* hours since midnight - [0,23] */ + uInt tm_mday; /* day of the month - [1,31] */ + uInt tm_mon; /* months since January - [0,11] */ + uInt tm_year; /* years - [1980..2044] */ +} tm_zip; + +typedef struct +{ + tm_zip tmz_date; /* date in understandable format */ + uLong dosDate; /* if dos_date == 0, tmu_date is used */ +/* uLong flag; */ /* general purpose bit flag 2 bytes */ + + uLong internal_fa; /* internal file attributes 2 bytes */ + uLong external_fa; /* external file attributes 4 bytes */ +} zip_fileinfo; + +typedef const char* zipcharpc; + + +#define APPEND_STATUS_CREATE (0) +#define APPEND_STATUS_CREATEAFTER (1) +#define APPEND_STATUS_ADDINZIP (2) + +extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append)); +extern zipFile ZEXPORT zipOpen64 OF((const void *pathname, int append)); +/* + Create a zipfile. + pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on + an Unix computer "zlib/zlib113.zip". + if the file pathname exist and append==APPEND_STATUS_CREATEAFTER, the zip + will be created at the end of the file. + (useful if the file contain a self extractor code) + if the file pathname exist and append==APPEND_STATUS_ADDINZIP, we will + add files in existing zip (be sure you don't add file that doesn't exist) + If the zipfile cannot be opened, the return value is NULL. + Else, the return value is a zipFile Handle, usable with other function + of this zip package. +*/ + +/* Note : there is no delete function into a zipfile. + If you want delete file into a zipfile, you must open a zipfile, and create another + Of couse, you can use RAW reading and writing to copy the file you did not want delte +*/ + +extern zipFile ZEXPORT zipOpen2 OF((const char *pathname, + int append, + zipcharpc* globalcomment, + zlib_filefunc_def* pzlib_filefunc_def)); + +extern zipFile ZEXPORT zipOpen2_64 OF((const void *pathname, + int append, + zipcharpc* globalcomment, + zlib_filefunc64_def* pzlib_filefunc_def)); + +extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level)); + +extern int ZEXPORT zipOpenNewFileInZip64 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int zip64)); + +/* + Open a file in the ZIP for writing. + filename : the filename in zip (if NULL, '-' without quote will be used + *zipfi contain supplemental information + if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local + contains the extrafield data the the local header + if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global + contains the extrafield data the the local header + if comment != NULL, comment contain the comment string + method contain the compression method (0 for store, Z_DEFLATED for deflate) + level contain the level of compression (can be Z_DEFAULT_COMPRESSION) + zip64 is set to 1 if a zip64 extended information block should be added to the local file header. + this MUST be '1' if the uncompressed size is >= 0xffffffff. + +*/ + + +extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw)); + + +extern int ZEXPORT zipOpenNewFileInZip2_64 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int zip64)); +/* + Same than zipOpenNewFileInZip, except if raw=1, we write raw file + */ + +extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int windowBits, + int memLevel, + int strategy, + const char* password, + uLong crcForCrypting)); + +extern int ZEXPORT zipOpenNewFileInZip3_64 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int windowBits, + int memLevel, + int strategy, + const char* password, + uLong crcForCrypting, + int zip64 + )); + +/* + Same than zipOpenNewFileInZip2, except + windowBits,memLevel,,strategy : see parameter strategy in deflateInit2 + password : crypting password (NULL for no crypting) + crcForCrypting : crc of file to compress (needed for crypting) + */ + +extern int ZEXPORT zipOpenNewFileInZip4 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int windowBits, + int memLevel, + int strategy, + const char* password, + uLong crcForCrypting, + uLong versionMadeBy, + uLong flagBase + )); + + +extern int ZEXPORT zipOpenNewFileInZip4_64 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int windowBits, + int memLevel, + int strategy, + const char* password, + uLong crcForCrypting, + uLong versionMadeBy, + uLong flagBase, + int zip64 + )); +/* + Same than zipOpenNewFileInZip4, except + versionMadeBy : value for Version made by field + flag : value for flag field (compression level info will be added) + */ + + +extern int ZEXPORT zipWriteInFileInZip OF((zipFile file, + const void* buf, + unsigned len)); +/* + Write data in the zipfile +*/ + +extern int ZEXPORT zipCloseFileInZip OF((zipFile file)); +/* + Close the current file in the zipfile +*/ + +extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file, + uLong uncompressed_size, + uLong crc32)); + +extern int ZEXPORT zipCloseFileInZipRaw64 OF((zipFile file, + ZPOS64_T uncompressed_size, + uLong crc32)); + +/* + Close the current file in the zipfile, for file opened with + parameter raw=1 in zipOpenNewFileInZip2 + uncompressed_size and crc32 are value for the uncompressed size +*/ + +extern int ZEXPORT zipClose OF((zipFile file, + const char* global_comment)); +/* + Close the zipfile +*/ + + +extern int ZEXPORT zipRemoveExtraInfoBlock OF((char* pData, int* dataLen, short sHeader)); +/* + zipRemoveExtraInfoBlock - Added by Mathias Svensson + + Remove extra information block from a extra information data for the local file header or central directory header + + It is needed to remove ZIP64 extra information blocks when before data is written if using RAW mode. + + 0x0001 is the signature header for the ZIP64 extra information blocks + + usage. + Remove ZIP64 Extra information from a central director extra field data + zipRemoveExtraInfoBlock(pCenDirExtraFieldData, &nCenDirExtraFieldDataLen, 0x0001); + + Remove ZIP64 Extra information from a Local File Header extra field data + zipRemoveExtraInfoBlock(pLocalHeaderExtraFieldData, &nLocalHeaderExtraFieldDataLen, 0x0001); +*/ + +#ifdef __cplusplus +} +#endif + +#endif /* _zip64_H */ diff --git a/src/SDL2/external/zlib-1.2.8/contrib/pascal/example.pas b/src/SDL2/external/zlib-1.2.8/contrib/pascal/example.pas new file mode 100644 index 000000000..5518b36a7 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/pascal/example.pas @@ -0,0 +1,599 @@ +(* example.c -- usage example of the zlib compression library + * Copyright (C) 1995-2003 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Pascal translation + * Copyright (C) 1998 by Jacques Nomssi Nzali. + * For conditions of distribution and use, see copyright notice in readme.txt + * + * Adaptation to the zlibpas interface + * Copyright (C) 2003 by Cosmin Truta. + * For conditions of distribution and use, see copyright notice in readme.txt + *) + +program example; + +{$DEFINE TEST_COMPRESS} +{DO NOT $DEFINE TEST_GZIO} +{$DEFINE TEST_DEFLATE} +{$DEFINE TEST_INFLATE} +{$DEFINE TEST_FLUSH} +{$DEFINE TEST_SYNC} +{$DEFINE TEST_DICT} + +uses SysUtils, zlibpas; + +const TESTFILE = 'foo.gz'; + +(* "hello world" would be more standard, but the repeated "hello" + * stresses the compression code better, sorry... + *) +const hello: PChar = 'hello, hello!'; + +const dictionary: PChar = 'hello'; + +var dictId: LongInt; (* Adler32 value of the dictionary *) + +procedure CHECK_ERR(err: Integer; msg: String); +begin + if err <> Z_OK then + begin + WriteLn(msg, ' error: ', err); + Halt(1); + end; +end; + +procedure EXIT_ERR(const msg: String); +begin + WriteLn('Error: ', msg); + Halt(1); +end; + +(* =========================================================================== + * Test compress and uncompress + *) +{$IFDEF TEST_COMPRESS} +procedure test_compress(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var err: Integer; + len: LongInt; +begin + len := StrLen(hello)+1; + + err := compress(compr, comprLen, hello, len); + CHECK_ERR(err, 'compress'); + + StrCopy(PChar(uncompr), 'garbage'); + + err := uncompress(uncompr, uncomprLen, compr, comprLen); + CHECK_ERR(err, 'uncompress'); + + if StrComp(PChar(uncompr), hello) <> 0 then + EXIT_ERR('bad uncompress') + else + WriteLn('uncompress(): ', PChar(uncompr)); +end; +{$ENDIF} + +(* =========================================================================== + * Test read/write of .gz files + *) +{$IFDEF TEST_GZIO} +procedure test_gzio(const fname: PChar; (* compressed file name *) + uncompr: Pointer; + uncomprLen: LongInt); +var err: Integer; + len: Integer; + zfile: gzFile; + pos: LongInt; +begin + len := StrLen(hello)+1; + + zfile := gzopen(fname, 'wb'); + if zfile = NIL then + begin + WriteLn('gzopen error'); + Halt(1); + end; + gzputc(zfile, 'h'); + if gzputs(zfile, 'ello') <> 4 then + begin + WriteLn('gzputs err: ', gzerror(zfile, err)); + Halt(1); + end; + {$IFDEF GZ_FORMAT_STRING} + if gzprintf(zfile, ', %s!', 'hello') <> 8 then + begin + WriteLn('gzprintf err: ', gzerror(zfile, err)); + Halt(1); + end; + {$ELSE} + if gzputs(zfile, ', hello!') <> 8 then + begin + WriteLn('gzputs err: ', gzerror(zfile, err)); + Halt(1); + end; + {$ENDIF} + gzseek(zfile, 1, SEEK_CUR); (* add one zero byte *) + gzclose(zfile); + + zfile := gzopen(fname, 'rb'); + if zfile = NIL then + begin + WriteLn('gzopen error'); + Halt(1); + end; + + StrCopy(PChar(uncompr), 'garbage'); + + if gzread(zfile, uncompr, uncomprLen) <> len then + begin + WriteLn('gzread err: ', gzerror(zfile, err)); + Halt(1); + end; + if StrComp(PChar(uncompr), hello) <> 0 then + begin + WriteLn('bad gzread: ', PChar(uncompr)); + Halt(1); + end + else + WriteLn('gzread(): ', PChar(uncompr)); + + pos := gzseek(zfile, -8, SEEK_CUR); + if (pos <> 6) or (gztell(zfile) <> pos) then + begin + WriteLn('gzseek error, pos=', pos, ', gztell=', gztell(zfile)); + Halt(1); + end; + + if gzgetc(zfile) <> ' ' then + begin + WriteLn('gzgetc error'); + Halt(1); + end; + + if gzungetc(' ', zfile) <> ' ' then + begin + WriteLn('gzungetc error'); + Halt(1); + end; + + gzgets(zfile, PChar(uncompr), uncomprLen); + uncomprLen := StrLen(PChar(uncompr)); + if uncomprLen <> 7 then (* " hello!" *) + begin + WriteLn('gzgets err after gzseek: ', gzerror(zfile, err)); + Halt(1); + end; + if StrComp(PChar(uncompr), hello + 6) <> 0 then + begin + WriteLn('bad gzgets after gzseek'); + Halt(1); + end + else + WriteLn('gzgets() after gzseek: ', PChar(uncompr)); + + gzclose(zfile); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with small buffers + *) +{$IFDEF TEST_DEFLATE} +procedure test_deflate(compr: Pointer; comprLen: LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; + len: LongInt; +begin + len := StrLen(hello)+1; + + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, 'deflateInit'); + + c_stream.next_in := hello; + c_stream.next_out := compr; + + while (c_stream.total_in <> len) and + (c_stream.total_out < comprLen) do + begin + c_stream.avail_out := 1; { force small buffers } + c_stream.avail_in := 1; + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + end; + + (* Finish the stream, still forcing small buffers: *) + while TRUE do + begin + c_stream.avail_out := 1; + err := deflate(c_stream, Z_FINISH); + if err = Z_STREAM_END then + break; + CHECK_ERR(err, 'deflate'); + end; + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); +end; +{$ENDIF} + +(* =========================================================================== + * Test inflate with small buffers + *) +{$IFDEF TEST_INFLATE} +procedure test_inflate(compr: Pointer; comprLen : LongInt; + uncompr: Pointer; uncomprLen : LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := 0; + d_stream.next_out := uncompr; + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + while (d_stream.total_out < uncomprLen) and + (d_stream.total_in < comprLen) do + begin + d_stream.avail_out := 1; (* force small buffers *) + d_stream.avail_in := 1; + err := inflate(d_stream, Z_NO_FLUSH); + if err = Z_STREAM_END then + break; + CHECK_ERR(err, 'inflate'); + end; + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + if StrComp(PChar(uncompr), hello) <> 0 then + EXIT_ERR('bad inflate') + else + WriteLn('inflate(): ', PChar(uncompr)); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with large buffers and dynamic change of compression level + *) +{$IFDEF TEST_DEFLATE} +procedure test_large_deflate(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; +begin + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_BEST_SPEED); + CHECK_ERR(err, 'deflateInit'); + + c_stream.next_out := compr; + c_stream.avail_out := Integer(comprLen); + + (* At this point, uncompr is still mostly zeroes, so it should compress + * very well: + *) + c_stream.next_in := uncompr; + c_stream.avail_in := Integer(uncomprLen); + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + if c_stream.avail_in <> 0 then + EXIT_ERR('deflate not greedy'); + + (* Feed in already compressed data and switch to no compression: *) + deflateParams(c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); + c_stream.next_in := compr; + c_stream.avail_in := Integer(comprLen div 2); + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + + (* Switch back to compressing mode: *) + deflateParams(c_stream, Z_BEST_COMPRESSION, Z_FILTERED); + c_stream.next_in := uncompr; + c_stream.avail_in := Integer(uncomprLen); + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + + err := deflate(c_stream, Z_FINISH); + if err <> Z_STREAM_END then + EXIT_ERR('deflate should report Z_STREAM_END'); + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); +end; +{$ENDIF} + +(* =========================================================================== + * Test inflate with large buffers + *) +{$IFDEF TEST_INFLATE} +procedure test_large_inflate(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := Integer(comprLen); + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + while TRUE do + begin + d_stream.next_out := uncompr; (* discard the output *) + d_stream.avail_out := Integer(uncomprLen); + err := inflate(d_stream, Z_NO_FLUSH); + if err = Z_STREAM_END then + break; + CHECK_ERR(err, 'large inflate'); + end; + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + if d_stream.total_out <> 2 * uncomprLen + comprLen div 2 then + begin + WriteLn('bad large inflate: ', d_stream.total_out); + Halt(1); + end + else + WriteLn('large_inflate(): OK'); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with full flush + *) +{$IFDEF TEST_FLUSH} +procedure test_flush(compr: Pointer; var comprLen : LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; + len: Integer; +begin + len := StrLen(hello)+1; + + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, 'deflateInit'); + + c_stream.next_in := hello; + c_stream.next_out := compr; + c_stream.avail_in := 3; + c_stream.avail_out := Integer(comprLen); + err := deflate(c_stream, Z_FULL_FLUSH); + CHECK_ERR(err, 'deflate'); + + Inc(PByteArray(compr)^[3]); (* force an error in first compressed block *) + c_stream.avail_in := len - 3; + + err := deflate(c_stream, Z_FINISH); + if err <> Z_STREAM_END then + CHECK_ERR(err, 'deflate'); + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); + + comprLen := c_stream.total_out; +end; +{$ENDIF} + +(* =========================================================================== + * Test inflateSync() + *) +{$IFDEF TEST_SYNC} +procedure test_sync(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen : LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := 2; (* just read the zlib header *) + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + d_stream.next_out := uncompr; + d_stream.avail_out := Integer(uncomprLen); + + inflate(d_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'inflate'); + + d_stream.avail_in := Integer(comprLen-2); (* read all compressed data *) + err := inflateSync(d_stream); (* but skip the damaged part *) + CHECK_ERR(err, 'inflateSync'); + + err := inflate(d_stream, Z_FINISH); + if err <> Z_DATA_ERROR then + EXIT_ERR('inflate should report DATA_ERROR'); + (* Because of incorrect adler32 *) + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + WriteLn('after inflateSync(): hel', PChar(uncompr)); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with preset dictionary + *) +{$IFDEF TEST_DICT} +procedure test_dict_deflate(compr: Pointer; comprLen: LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; +begin + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_BEST_COMPRESSION); + CHECK_ERR(err, 'deflateInit'); + + err := deflateSetDictionary(c_stream, dictionary, StrLen(dictionary)); + CHECK_ERR(err, 'deflateSetDictionary'); + + dictId := c_stream.adler; + c_stream.next_out := compr; + c_stream.avail_out := Integer(comprLen); + + c_stream.next_in := hello; + c_stream.avail_in := StrLen(hello)+1; + + err := deflate(c_stream, Z_FINISH); + if err <> Z_STREAM_END then + EXIT_ERR('deflate should report Z_STREAM_END'); + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); +end; +{$ENDIF} + +(* =========================================================================== + * Test inflate with a preset dictionary + *) +{$IFDEF TEST_DICT} +procedure test_dict_inflate(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := Integer(comprLen); + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + d_stream.next_out := uncompr; + d_stream.avail_out := Integer(uncomprLen); + + while TRUE do + begin + err := inflate(d_stream, Z_NO_FLUSH); + if err = Z_STREAM_END then + break; + if err = Z_NEED_DICT then + begin + if d_stream.adler <> dictId then + EXIT_ERR('unexpected dictionary'); + err := inflateSetDictionary(d_stream, dictionary, StrLen(dictionary)); + end; + CHECK_ERR(err, 'inflate with dict'); + end; + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + if StrComp(PChar(uncompr), hello) <> 0 then + EXIT_ERR('bad inflate with dict') + else + WriteLn('inflate with dictionary: ', PChar(uncompr)); +end; +{$ENDIF} + +var compr, uncompr: Pointer; + comprLen, uncomprLen: LongInt; + +begin + if zlibVersion^ <> ZLIB_VERSION[1] then + EXIT_ERR('Incompatible zlib version'); + + WriteLn('zlib version: ', zlibVersion); + WriteLn('zlib compile flags: ', Format('0x%x', [zlibCompileFlags])); + + comprLen := 10000 * SizeOf(Integer); (* don't overflow on MSDOS *) + uncomprLen := comprLen; + GetMem(compr, comprLen); + GetMem(uncompr, uncomprLen); + if (compr = NIL) or (uncompr = NIL) then + EXIT_ERR('Out of memory'); + (* compr and uncompr are cleared to avoid reading uninitialized + * data and to ensure that uncompr compresses well. + *) + FillChar(compr^, comprLen, 0); + FillChar(uncompr^, uncomprLen, 0); + + {$IFDEF TEST_COMPRESS} + WriteLn('** Testing compress'); + test_compress(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_GZIO} + WriteLn('** Testing gzio'); + if ParamCount >= 1 then + test_gzio(ParamStr(1), uncompr, uncomprLen) + else + test_gzio(TESTFILE, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_DEFLATE} + WriteLn('** Testing deflate with small buffers'); + test_deflate(compr, comprLen); + {$ENDIF} + {$IFDEF TEST_INFLATE} + WriteLn('** Testing inflate with small buffers'); + test_inflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_DEFLATE} + WriteLn('** Testing deflate with large buffers'); + test_large_deflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + {$IFDEF TEST_INFLATE} + WriteLn('** Testing inflate with large buffers'); + test_large_inflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_FLUSH} + WriteLn('** Testing deflate with full flush'); + test_flush(compr, comprLen); + {$ENDIF} + {$IFDEF TEST_SYNC} + WriteLn('** Testing inflateSync'); + test_sync(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + comprLen := uncomprLen; + + {$IFDEF TEST_DICT} + WriteLn('** Testing deflate and inflate with preset dictionary'); + test_dict_deflate(compr, comprLen); + test_dict_inflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + FreeMem(compr, comprLen); + FreeMem(uncompr, uncomprLen); +end. diff --git a/src/SDL2/external/zlib-1.2.8/contrib/pascal/readme.txt b/src/SDL2/external/zlib-1.2.8/contrib/pascal/readme.txt new file mode 100644 index 000000000..60e87c8a3 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/pascal/readme.txt @@ -0,0 +1,76 @@ + +This directory contains a Pascal (Delphi, Kylix) interface to the +zlib data compression library. + + +Directory listing +================= + +zlibd32.mak makefile for Borland C++ +example.pas usage example of zlib +zlibpas.pas the Pascal interface to zlib +readme.txt this file + + +Compatibility notes +=================== + +- Although the name "zlib" would have been more normal for the + zlibpas unit, this name is already taken by Borland's ZLib unit. + This is somehow unfortunate, because that unit is not a genuine + interface to the full-fledged zlib functionality, but a suite of + class wrappers around zlib streams. Other essential features, + such as checksums, are missing. + It would have been more appropriate for that unit to have a name + like "ZStreams", or something similar. + +- The C and zlib-supplied types int, uInt, long, uLong, etc. are + translated directly into Pascal types of similar sizes (Integer, + LongInt, etc.), to avoid namespace pollution. In particular, + there is no conversion of unsigned int into a Pascal unsigned + integer. The Word type is non-portable and has the same size + (16 bits) both in a 16-bit and in a 32-bit environment, unlike + Integer. Even if there is a 32-bit Cardinal type, there is no + real need for unsigned int in zlib under a 32-bit environment. + +- Except for the callbacks, the zlib function interfaces are + assuming the calling convention normally used in Pascal + (__pascal for DOS and Windows16, __fastcall for Windows32). + Since the cdecl keyword is used, the old Turbo Pascal does + not work with this interface. + +- The gz* function interfaces are not translated, to avoid + interfacing problems with the C runtime library. Besides, + gzprintf(gzFile file, const char *format, ...) + cannot be translated into Pascal. + + +Legal issues +============ + +The zlibpas interface is: + Copyright (C) 1995-2003 Jean-loup Gailly and Mark Adler. + Copyright (C) 1998 by Bob Dellaca. + Copyright (C) 2003 by Cosmin Truta. + +The example program is: + Copyright (C) 1995-2003 by Jean-loup Gailly. + Copyright (C) 1998,1999,2000 by Jacques Nomssi Nzali. + Copyright (C) 2003 by Cosmin Truta. + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/pascal/zlibd32.mak b/src/SDL2/external/zlib-1.2.8/contrib/pascal/zlibd32.mak new file mode 100644 index 000000000..9bb00b7cc --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/pascal/zlibd32.mak @@ -0,0 +1,99 @@ +# Makefile for zlib +# For use with Delphi and C++ Builder under Win32 +# Updated for zlib 1.2.x by Cosmin Truta + +# ------------ Borland C++ ------------ + +# This project uses the Delphi (fastcall/register) calling convention: +LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl + +CC = bcc32 +LD = bcc32 +AR = tlib +# do not use "-pr" in CFLAGS +CFLAGS = -a -d -k- -O2 $(LOC) +LDFLAGS = + + +# variables +ZLIB_LIB = zlib.lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj +OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + +minigzip.obj: test/minigzip.c zlib.h zconf.h + + +# For the sake of the old Borland make, +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + + +# cleanup +clean: + -del *.obj + -del *.exe + -del *.lib + -del *.tds + -del zlib.bak + -del foo.gz + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/pascal/zlibpas.pas b/src/SDL2/external/zlib-1.2.8/contrib/pascal/zlibpas.pas new file mode 100644 index 000000000..e6a0782b4 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/pascal/zlibpas.pas @@ -0,0 +1,276 @@ +(* zlibpas -- Pascal interface to the zlib data compression library + * + * Copyright (C) 2003 Cosmin Truta. + * Derived from original sources by Bob Dellaca. + * For conditions of distribution and use, see copyright notice in readme.txt + *) + +unit zlibpas; + +interface + +const + ZLIB_VERSION = '1.2.8'; + ZLIB_VERNUM = $1280; + +type + alloc_func = function(opaque: Pointer; items, size: Integer): Pointer; + cdecl; + free_func = procedure(opaque, address: Pointer); + cdecl; + + in_func = function(opaque: Pointer; var buf: PByte): Integer; + cdecl; + out_func = function(opaque: Pointer; buf: PByte; size: Integer): Integer; + cdecl; + + z_streamp = ^z_stream; + z_stream = packed record + next_in: PChar; (* next input byte *) + avail_in: Integer; (* number of bytes available at next_in *) + total_in: LongInt; (* total nb of input bytes read so far *) + + next_out: PChar; (* next output byte should be put there *) + avail_out: Integer; (* remaining free space at next_out *) + total_out: LongInt; (* total nb of bytes output so far *) + + msg: PChar; (* last error message, NULL if no error *) + state: Pointer; (* not visible by applications *) + + zalloc: alloc_func; (* used to allocate the internal state *) + zfree: free_func; (* used to free the internal state *) + opaque: Pointer; (* private data object passed to zalloc and zfree *) + + data_type: Integer; (* best guess about the data type: ascii or binary *) + adler: LongInt; (* adler32 value of the uncompressed data *) + reserved: LongInt; (* reserved for future use *) + end; + + gz_headerp = ^gz_header; + gz_header = packed record + text: Integer; (* true if compressed data believed to be text *) + time: LongInt; (* modification time *) + xflags: Integer; (* extra flags (not used when writing a gzip file) *) + os: Integer; (* operating system *) + extra: PChar; (* pointer to extra field or Z_NULL if none *) + extra_len: Integer; (* extra field length (valid if extra != Z_NULL) *) + extra_max: Integer; (* space at extra (only when reading header) *) + name: PChar; (* pointer to zero-terminated file name or Z_NULL *) + name_max: Integer; (* space at name (only when reading header) *) + comment: PChar; (* pointer to zero-terminated comment or Z_NULL *) + comm_max: Integer; (* space at comment (only when reading header) *) + hcrc: Integer; (* true if there was or will be a header crc *) + done: Integer; (* true when done reading gzip header *) + end; + +(* constants *) +const + Z_NO_FLUSH = 0; + Z_PARTIAL_FLUSH = 1; + Z_SYNC_FLUSH = 2; + Z_FULL_FLUSH = 3; + Z_FINISH = 4; + Z_BLOCK = 5; + Z_TREES = 6; + + Z_OK = 0; + Z_STREAM_END = 1; + Z_NEED_DICT = 2; + Z_ERRNO = -1; + Z_STREAM_ERROR = -2; + Z_DATA_ERROR = -3; + Z_MEM_ERROR = -4; + Z_BUF_ERROR = -5; + Z_VERSION_ERROR = -6; + + Z_NO_COMPRESSION = 0; + Z_BEST_SPEED = 1; + Z_BEST_COMPRESSION = 9; + Z_DEFAULT_COMPRESSION = -1; + + Z_FILTERED = 1; + Z_HUFFMAN_ONLY = 2; + Z_RLE = 3; + Z_FIXED = 4; + Z_DEFAULT_STRATEGY = 0; + + Z_BINARY = 0; + Z_TEXT = 1; + Z_ASCII = 1; + Z_UNKNOWN = 2; + + Z_DEFLATED = 8; + +(* basic functions *) +function zlibVersion: PChar; +function deflateInit(var strm: z_stream; level: Integer): Integer; +function deflate(var strm: z_stream; flush: Integer): Integer; +function deflateEnd(var strm: z_stream): Integer; +function inflateInit(var strm: z_stream): Integer; +function inflate(var strm: z_stream; flush: Integer): Integer; +function inflateEnd(var strm: z_stream): Integer; + +(* advanced functions *) +function deflateInit2(var strm: z_stream; level, method, windowBits, + memLevel, strategy: Integer): Integer; +function deflateSetDictionary(var strm: z_stream; const dictionary: PChar; + dictLength: Integer): Integer; +function deflateCopy(var dest, source: z_stream): Integer; +function deflateReset(var strm: z_stream): Integer; +function deflateParams(var strm: z_stream; level, strategy: Integer): Integer; +function deflateTune(var strm: z_stream; good_length, max_lazy, nice_length, max_chain: Integer): Integer; +function deflateBound(var strm: z_stream; sourceLen: LongInt): LongInt; +function deflatePending(var strm: z_stream; var pending: Integer; var bits: Integer): Integer; +function deflatePrime(var strm: z_stream; bits, value: Integer): Integer; +function deflateSetHeader(var strm: z_stream; head: gz_header): Integer; +function inflateInit2(var strm: z_stream; windowBits: Integer): Integer; +function inflateSetDictionary(var strm: z_stream; const dictionary: PChar; + dictLength: Integer): Integer; +function inflateSync(var strm: z_stream): Integer; +function inflateCopy(var dest, source: z_stream): Integer; +function inflateReset(var strm: z_stream): Integer; +function inflateReset2(var strm: z_stream; windowBits: Integer): Integer; +function inflatePrime(var strm: z_stream; bits, value: Integer): Integer; +function inflateMark(var strm: z_stream): LongInt; +function inflateGetHeader(var strm: z_stream; var head: gz_header): Integer; +function inflateBackInit(var strm: z_stream; + windowBits: Integer; window: PChar): Integer; +function inflateBack(var strm: z_stream; in_fn: in_func; in_desc: Pointer; + out_fn: out_func; out_desc: Pointer): Integer; +function inflateBackEnd(var strm: z_stream): Integer; +function zlibCompileFlags: LongInt; + +(* utility functions *) +function compress(dest: PChar; var destLen: LongInt; + const source: PChar; sourceLen: LongInt): Integer; +function compress2(dest: PChar; var destLen: LongInt; + const source: PChar; sourceLen: LongInt; + level: Integer): Integer; +function compressBound(sourceLen: LongInt): LongInt; +function uncompress(dest: PChar; var destLen: LongInt; + const source: PChar; sourceLen: LongInt): Integer; + +(* checksum functions *) +function adler32(adler: LongInt; const buf: PChar; len: Integer): LongInt; +function adler32_combine(adler1, adler2, len2: LongInt): LongInt; +function crc32(crc: LongInt; const buf: PChar; len: Integer): LongInt; +function crc32_combine(crc1, crc2, len2: LongInt): LongInt; + +(* various hacks, don't look :) *) +function deflateInit_(var strm: z_stream; level: Integer; + const version: PChar; stream_size: Integer): Integer; +function inflateInit_(var strm: z_stream; const version: PChar; + stream_size: Integer): Integer; +function deflateInit2_(var strm: z_stream; + level, method, windowBits, memLevel, strategy: Integer; + const version: PChar; stream_size: Integer): Integer; +function inflateInit2_(var strm: z_stream; windowBits: Integer; + const version: PChar; stream_size: Integer): Integer; +function inflateBackInit_(var strm: z_stream; + windowBits: Integer; window: PChar; + const version: PChar; stream_size: Integer): Integer; + + +implementation + +{$L adler32.obj} +{$L compress.obj} +{$L crc32.obj} +{$L deflate.obj} +{$L infback.obj} +{$L inffast.obj} +{$L inflate.obj} +{$L inftrees.obj} +{$L trees.obj} +{$L uncompr.obj} +{$L zutil.obj} + +function adler32; external; +function adler32_combine; external; +function compress; external; +function compress2; external; +function compressBound; external; +function crc32; external; +function crc32_combine; external; +function deflate; external; +function deflateBound; external; +function deflateCopy; external; +function deflateEnd; external; +function deflateInit_; external; +function deflateInit2_; external; +function deflateParams; external; +function deflatePending; external; +function deflatePrime; external; +function deflateReset; external; +function deflateSetDictionary; external; +function deflateSetHeader; external; +function deflateTune; external; +function inflate; external; +function inflateBack; external; +function inflateBackEnd; external; +function inflateBackInit_; external; +function inflateCopy; external; +function inflateEnd; external; +function inflateGetHeader; external; +function inflateInit_; external; +function inflateInit2_; external; +function inflateMark; external; +function inflatePrime; external; +function inflateReset; external; +function inflateReset2; external; +function inflateSetDictionary; external; +function inflateSync; external; +function uncompress; external; +function zlibCompileFlags; external; +function zlibVersion; external; + +function deflateInit(var strm: z_stream; level: Integer): Integer; +begin + Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream)); +end; + +function deflateInit2(var strm: z_stream; level, method, windowBits, memLevel, + strategy: Integer): Integer; +begin + Result := deflateInit2_(strm, level, method, windowBits, memLevel, strategy, + ZLIB_VERSION, sizeof(z_stream)); +end; + +function inflateInit(var strm: z_stream): Integer; +begin + Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream)); +end; + +function inflateInit2(var strm: z_stream; windowBits: Integer): Integer; +begin + Result := inflateInit2_(strm, windowBits, ZLIB_VERSION, sizeof(z_stream)); +end; + +function inflateBackInit(var strm: z_stream; + windowBits: Integer; window: PChar): Integer; +begin + Result := inflateBackInit_(strm, windowBits, window, + ZLIB_VERSION, sizeof(z_stream)); +end; + +function _malloc(Size: Integer): Pointer; cdecl; +begin + GetMem(Result, Size); +end; + +procedure _free(Block: Pointer); cdecl; +begin + FreeMem(Block); +end; + +procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl; +begin + FillChar(P^, count, B); +end; + +procedure _memcpy(dest, source: Pointer; count: Integer); cdecl; +begin + Move(source^, dest^, count); +end; + +end. diff --git a/src/SDL2/external/zlib-1.2.8/contrib/puff/README b/src/SDL2/external/zlib-1.2.8/contrib/puff/README new file mode 100644 index 000000000..bbc4cb595 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/puff/README @@ -0,0 +1,63 @@ +Puff -- A Simple Inflate +3 Mar 2003 +Mark Adler +madler@alumni.caltech.edu + +What this is -- + +puff.c provides the routine puff() to decompress the deflate data format. It +does so more slowly than zlib, but the code is about one-fifth the size of the +inflate code in zlib, and written to be very easy to read. + +Why I wrote this -- + +puff.c was written to document the deflate format unambiguously, by virtue of +being working C code. It is meant to supplement RFC 1951, which formally +describes the deflate format. I have received many questions on details of the +deflate format, and I hope that reading this code will answer those questions. +puff.c is heavily commented with details of the deflate format, especially +those little nooks and cranies of the format that might not be obvious from a +specification. + +puff.c may also be useful in applications where code size or memory usage is a +very limited resource, and speed is not as important. + +How to use it -- + +Well, most likely you should just be reading puff.c and using zlib for actual +applications, but if you must ... + +Include puff.h in your code, which provides this prototype: + +int puff(unsigned char *dest, /* pointer to destination pointer */ + unsigned long *destlen, /* amount of output space */ + unsigned char *source, /* pointer to source data pointer */ + unsigned long *sourcelen); /* amount of input available */ + +Then you can call puff() to decompress a deflate stream that is in memory in +its entirety at source, to a sufficiently sized block of memory for the +decompressed data at dest. puff() is the only external symbol in puff.c The +only C library functions that puff.c needs are setjmp() and longjmp(), which +are used to simplify error checking in the code to improve readabilty. puff.c +does no memory allocation, and uses less than 2K bytes off of the stack. + +If destlen is not enough space for the uncompressed data, then inflate will +return an error without writing more than destlen bytes. Note that this means +that in order to decompress the deflate data successfully, you need to know +the size of the uncompressed data ahead of time. + +If needed, puff() can determine the size of the uncompressed data with no +output space. This is done by passing dest equal to (unsigned char *)0. Then +the initial value of *destlen is ignored and *destlen is set to the length of +the uncompressed data. So if the size of the uncompressed data is not known, +then two passes of puff() can be used--first to determine the size, and second +to do the actual inflation after allocating the appropriate memory. Not +pretty, but it works. (This is one of the reasons you should be using zlib.) + +The deflate format is self-terminating. If the deflate stream does not end +in *sourcelen bytes, puff() will return an error without reading at or past +endsource. + +On return, *sourcelen is updated to the amount of input data consumed, and +*destlen is updated to the size of the uncompressed data. See the comments +in puff.c for the possible return codes for puff(). diff --git a/src/SDL2/external/zlib-1.2.8/contrib/puff/puff.c b/src/SDL2/external/zlib-1.2.8/contrib/puff/puff.c new file mode 100644 index 000000000..ba58483d5 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/puff/puff.c @@ -0,0 +1,840 @@ +/* + * puff.c + * Copyright (C) 2002-2013 Mark Adler + * For conditions of distribution and use, see copyright notice in puff.h + * version 2.3, 21 Jan 2013 + * + * puff.c is a simple inflate written to be an unambiguous way to specify the + * deflate format. It is not written for speed but rather simplicity. As a + * side benefit, this code might actually be useful when small code is more + * important than speed, such as bootstrap applications. For typical deflate + * data, zlib's inflate() is about four times as fast as puff(). zlib's + * inflate compiles to around 20K on my machine, whereas puff.c compiles to + * around 4K on my machine (a PowerPC using GNU cc). If the faster decode() + * function here is used, then puff() is only twice as slow as zlib's + * inflate(). + * + * All dynamically allocated memory comes from the stack. The stack required + * is less than 2K bytes. This code is compatible with 16-bit int's and + * assumes that long's are at least 32 bits. puff.c uses the short data type, + * assumed to be 16 bits, for arrays in order to to conserve memory. The code + * works whether integers are stored big endian or little endian. + * + * In the comments below are "Format notes" that describe the inflate process + * and document some of the less obvious aspects of the format. This source + * code is meant to supplement RFC 1951, which formally describes the deflate + * format: + * + * http://www.zlib.org/rfc-deflate.html + */ + +/* + * Change history: + * + * 1.0 10 Feb 2002 - First version + * 1.1 17 Feb 2002 - Clarifications of some comments and notes + * - Update puff() dest and source pointers on negative + * errors to facilitate debugging deflators + * - Remove longest from struct huffman -- not needed + * - Simplify offs[] index in construct() + * - Add input size and checking, using longjmp() to + * maintain easy readability + * - Use short data type for large arrays + * - Use pointers instead of long to specify source and + * destination sizes to avoid arbitrary 4 GB limits + * 1.2 17 Mar 2002 - Add faster version of decode(), doubles speed (!), + * but leave simple version for readabilty + * - Make sure invalid distances detected if pointers + * are 16 bits + * - Fix fixed codes table error + * - Provide a scanning mode for determining size of + * uncompressed data + * 1.3 20 Mar 2002 - Go back to lengths for puff() parameters [Gailly] + * - Add a puff.h file for the interface + * - Add braces in puff() for else do [Gailly] + * - Use indexes instead of pointers for readability + * 1.4 31 Mar 2002 - Simplify construct() code set check + * - Fix some comments + * - Add FIXLCODES #define + * 1.5 6 Apr 2002 - Minor comment fixes + * 1.6 7 Aug 2002 - Minor format changes + * 1.7 3 Mar 2003 - Added test code for distribution + * - Added zlib-like license + * 1.8 9 Jan 2004 - Added some comments on no distance codes case + * 1.9 21 Feb 2008 - Fix bug on 16-bit integer architectures [Pohland] + * - Catch missing end-of-block symbol error + * 2.0 25 Jul 2008 - Add #define to permit distance too far back + * - Add option in TEST code for puff to write the data + * - Add option in TEST code to skip input bytes + * - Allow TEST code to read from piped stdin + * 2.1 4 Apr 2010 - Avoid variable initialization for happier compilers + * - Avoid unsigned comparisons for even happier compilers + * 2.2 25 Apr 2010 - Fix bug in variable initializations [Oberhumer] + * - Add const where appropriate [Oberhumer] + * - Split if's and ?'s for coverage testing + * - Break out test code to separate file + * - Move NIL to puff.h + * - Allow incomplete code only if single code length is 1 + * - Add full code coverage test to Makefile + * 2.3 21 Jan 2013 - Check for invalid code length codes in dynamic blocks + */ + +#include /* for setjmp(), longjmp(), and jmp_buf */ +#include "puff.h" /* prototype for puff() */ + +#define local static /* for local function definitions */ + +/* + * Maximums for allocations and loops. It is not useful to change these -- + * they are fixed by the deflate format. + */ +#define MAXBITS 15 /* maximum bits in a code */ +#define MAXLCODES 286 /* maximum number of literal/length codes */ +#define MAXDCODES 30 /* maximum number of distance codes */ +#define MAXCODES (MAXLCODES+MAXDCODES) /* maximum codes lengths to read */ +#define FIXLCODES 288 /* number of fixed literal/length codes */ + +/* input and output state */ +struct state { + /* output state */ + unsigned char *out; /* output buffer */ + unsigned long outlen; /* available space at out */ + unsigned long outcnt; /* bytes written to out so far */ + + /* input state */ + const unsigned char *in; /* input buffer */ + unsigned long inlen; /* available input at in */ + unsigned long incnt; /* bytes read so far */ + int bitbuf; /* bit buffer */ + int bitcnt; /* number of bits in bit buffer */ + + /* input limit error return state for bits() and decode() */ + jmp_buf env; +}; + +/* + * Return need bits from the input stream. This always leaves less than + * eight bits in the buffer. bits() works properly for need == 0. + * + * Format notes: + * + * - Bits are stored in bytes from the least significant bit to the most + * significant bit. Therefore bits are dropped from the bottom of the bit + * buffer, using shift right, and new bytes are appended to the top of the + * bit buffer, using shift left. + */ +local int bits(struct state *s, int need) +{ + long val; /* bit accumulator (can use up to 20 bits) */ + + /* load at least need bits into val */ + val = s->bitbuf; + while (s->bitcnt < need) { + if (s->incnt == s->inlen) + longjmp(s->env, 1); /* out of input */ + val |= (long)(s->in[s->incnt++]) << s->bitcnt; /* load eight bits */ + s->bitcnt += 8; + } + + /* drop need bits and update buffer, always zero to seven bits left */ + s->bitbuf = (int)(val >> need); + s->bitcnt -= need; + + /* return need bits, zeroing the bits above that */ + return (int)(val & ((1L << need) - 1)); +} + +/* + * Process a stored block. + * + * Format notes: + * + * - After the two-bit stored block type (00), the stored block length and + * stored bytes are byte-aligned for fast copying. Therefore any leftover + * bits in the byte that has the last bit of the type, as many as seven, are + * discarded. The value of the discarded bits are not defined and should not + * be checked against any expectation. + * + * - The second inverted copy of the stored block length does not have to be + * checked, but it's probably a good idea to do so anyway. + * + * - A stored block can have zero length. This is sometimes used to byte-align + * subsets of the compressed data for random access or partial recovery. + */ +local int stored(struct state *s) +{ + unsigned len; /* length of stored block */ + + /* discard leftover bits from current byte (assumes s->bitcnt < 8) */ + s->bitbuf = 0; + s->bitcnt = 0; + + /* get length and check against its one's complement */ + if (s->incnt + 4 > s->inlen) + return 2; /* not enough input */ + len = s->in[s->incnt++]; + len |= s->in[s->incnt++] << 8; + if (s->in[s->incnt++] != (~len & 0xff) || + s->in[s->incnt++] != ((~len >> 8) & 0xff)) + return -2; /* didn't match complement! */ + + /* copy len bytes from in to out */ + if (s->incnt + len > s->inlen) + return 2; /* not enough input */ + if (s->out != NIL) { + if (s->outcnt + len > s->outlen) + return 1; /* not enough output space */ + while (len--) + s->out[s->outcnt++] = s->in[s->incnt++]; + } + else { /* just scanning */ + s->outcnt += len; + s->incnt += len; + } + + /* done with a valid stored block */ + return 0; +} + +/* + * Huffman code decoding tables. count[1..MAXBITS] is the number of symbols of + * each length, which for a canonical code are stepped through in order. + * symbol[] are the symbol values in canonical order, where the number of + * entries is the sum of the counts in count[]. The decoding process can be + * seen in the function decode() below. + */ +struct huffman { + short *count; /* number of symbols of each length */ + short *symbol; /* canonically ordered symbols */ +}; + +/* + * Decode a code from the stream s using huffman table h. Return the symbol or + * a negative value if there is an error. If all of the lengths are zero, i.e. + * an empty code, or if the code is incomplete and an invalid code is received, + * then -10 is returned after reading MAXBITS bits. + * + * Format notes: + * + * - The codes as stored in the compressed data are bit-reversed relative to + * a simple integer ordering of codes of the same lengths. Hence below the + * bits are pulled from the compressed data one at a time and used to + * build the code value reversed from what is in the stream in order to + * permit simple integer comparisons for decoding. A table-based decoding + * scheme (as used in zlib) does not need to do this reversal. + * + * - The first code for the shortest length is all zeros. Subsequent codes of + * the same length are simply integer increments of the previous code. When + * moving up a length, a zero bit is appended to the code. For a complete + * code, the last code of the longest length will be all ones. + * + * - Incomplete codes are handled by this decoder, since they are permitted + * in the deflate format. See the format notes for fixed() and dynamic(). + */ +#ifdef SLOW +local int decode(struct state *s, const struct huffman *h) +{ + int len; /* current number of bits in code */ + int code; /* len bits being decoded */ + int first; /* first code of length len */ + int count; /* number of codes of length len */ + int index; /* index of first code of length len in symbol table */ + + code = first = index = 0; + for (len = 1; len <= MAXBITS; len++) { + code |= bits(s, 1); /* get next bit */ + count = h->count[len]; + if (code - count < first) /* if length len, return symbol */ + return h->symbol[index + (code - first)]; + index += count; /* else update for next length */ + first += count; + first <<= 1; + code <<= 1; + } + return -10; /* ran out of codes */ +} + +/* + * A faster version of decode() for real applications of this code. It's not + * as readable, but it makes puff() twice as fast. And it only makes the code + * a few percent larger. + */ +#else /* !SLOW */ +local int decode(struct state *s, const struct huffman *h) +{ + int len; /* current number of bits in code */ + int code; /* len bits being decoded */ + int first; /* first code of length len */ + int count; /* number of codes of length len */ + int index; /* index of first code of length len in symbol table */ + int bitbuf; /* bits from stream */ + int left; /* bits left in next or left to process */ + short *next; /* next number of codes */ + + bitbuf = s->bitbuf; + left = s->bitcnt; + code = first = index = 0; + len = 1; + next = h->count + 1; + while (1) { + while (left--) { + code |= bitbuf & 1; + bitbuf >>= 1; + count = *next++; + if (code - count < first) { /* if length len, return symbol */ + s->bitbuf = bitbuf; + s->bitcnt = (s->bitcnt - len) & 7; + return h->symbol[index + (code - first)]; + } + index += count; /* else update for next length */ + first += count; + first <<= 1; + code <<= 1; + len++; + } + left = (MAXBITS+1) - len; + if (left == 0) + break; + if (s->incnt == s->inlen) + longjmp(s->env, 1); /* out of input */ + bitbuf = s->in[s->incnt++]; + if (left > 8) + left = 8; + } + return -10; /* ran out of codes */ +} +#endif /* SLOW */ + +/* + * Given the list of code lengths length[0..n-1] representing a canonical + * Huffman code for n symbols, construct the tables required to decode those + * codes. Those tables are the number of codes of each length, and the symbols + * sorted by length, retaining their original order within each length. The + * return value is zero for a complete code set, negative for an over- + * subscribed code set, and positive for an incomplete code set. The tables + * can be used if the return value is zero or positive, but they cannot be used + * if the return value is negative. If the return value is zero, it is not + * possible for decode() using that table to return an error--any stream of + * enough bits will resolve to a symbol. If the return value is positive, then + * it is possible for decode() using that table to return an error for received + * codes past the end of the incomplete lengths. + * + * Not used by decode(), but used for error checking, h->count[0] is the number + * of the n symbols not in the code. So n - h->count[0] is the number of + * codes. This is useful for checking for incomplete codes that have more than + * one symbol, which is an error in a dynamic block. + * + * Assumption: for all i in 0..n-1, 0 <= length[i] <= MAXBITS + * This is assured by the construction of the length arrays in dynamic() and + * fixed() and is not verified by construct(). + * + * Format notes: + * + * - Permitted and expected examples of incomplete codes are one of the fixed + * codes and any code with a single symbol which in deflate is coded as one + * bit instead of zero bits. See the format notes for fixed() and dynamic(). + * + * - Within a given code length, the symbols are kept in ascending order for + * the code bits definition. + */ +local int construct(struct huffman *h, const short *length, int n) +{ + int symbol; /* current symbol when stepping through length[] */ + int len; /* current length when stepping through h->count[] */ + int left; /* number of possible codes left of current length */ + short offs[MAXBITS+1]; /* offsets in symbol table for each length */ + + /* count number of codes of each length */ + for (len = 0; len <= MAXBITS; len++) + h->count[len] = 0; + for (symbol = 0; symbol < n; symbol++) + (h->count[length[symbol]])++; /* assumes lengths are within bounds */ + if (h->count[0] == n) /* no codes! */ + return 0; /* complete, but decode() will fail */ + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; /* one possible code of zero length */ + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; /* one more bit, double codes left */ + left -= h->count[len]; /* deduct count from possible codes */ + if (left < 0) + return left; /* over-subscribed--return negative */ + } /* left > 0 means incomplete */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + h->count[len]; + + /* + * put symbols in table sorted by length, by symbol order within each + * length + */ + for (symbol = 0; symbol < n; symbol++) + if (length[symbol] != 0) + h->symbol[offs[length[symbol]]++] = symbol; + + /* return zero for complete set, positive for incomplete set */ + return left; +} + +/* + * Decode literal/length and distance codes until an end-of-block code. + * + * Format notes: + * + * - Compressed data that is after the block type if fixed or after the code + * description if dynamic is a combination of literals and length/distance + * pairs terminated by and end-of-block code. Literals are simply Huffman + * coded bytes. A length/distance pair is a coded length followed by a + * coded distance to represent a string that occurs earlier in the + * uncompressed data that occurs again at the current location. + * + * - Literals, lengths, and the end-of-block code are combined into a single + * code of up to 286 symbols. They are 256 literals (0..255), 29 length + * symbols (257..285), and the end-of-block symbol (256). + * + * - There are 256 possible lengths (3..258), and so 29 symbols are not enough + * to represent all of those. Lengths 3..10 and 258 are in fact represented + * by just a length symbol. Lengths 11..257 are represented as a symbol and + * some number of extra bits that are added as an integer to the base length + * of the length symbol. The number of extra bits is determined by the base + * length symbol. These are in the static arrays below, lens[] for the base + * lengths and lext[] for the corresponding number of extra bits. + * + * - The reason that 258 gets its own symbol is that the longest length is used + * often in highly redundant files. Note that 258 can also be coded as the + * base value 227 plus the maximum extra value of 31. While a good deflate + * should never do this, it is not an error, and should be decoded properly. + * + * - If a length is decoded, including its extra bits if any, then it is + * followed a distance code. There are up to 30 distance symbols. Again + * there are many more possible distances (1..32768), so extra bits are added + * to a base value represented by the symbol. The distances 1..4 get their + * own symbol, but the rest require extra bits. The base distances and + * corresponding number of extra bits are below in the static arrays dist[] + * and dext[]. + * + * - Literal bytes are simply written to the output. A length/distance pair is + * an instruction to copy previously uncompressed bytes to the output. The + * copy is from distance bytes back in the output stream, copying for length + * bytes. + * + * - Distances pointing before the beginning of the output data are not + * permitted. + * + * - Overlapped copies, where the length is greater than the distance, are + * allowed and common. For example, a distance of one and a length of 258 + * simply copies the last byte 258 times. A distance of four and a length of + * twelve copies the last four bytes three times. A simple forward copy + * ignoring whether the length is greater than the distance or not implements + * this correctly. You should not use memcpy() since its behavior is not + * defined for overlapped arrays. You should not use memmove() or bcopy() + * since though their behavior -is- defined for overlapping arrays, it is + * defined to do the wrong thing in this case. + */ +local int codes(struct state *s, + const struct huffman *lencode, + const struct huffman *distcode) +{ + int symbol; /* decoded symbol */ + int len; /* length for copy */ + unsigned dist; /* distance for copy */ + static const short lens[29] = { /* Size base for length codes 257..285 */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258}; + static const short lext[29] = { /* Extra bits for length codes 257..285 */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0}; + static const short dists[30] = { /* Offset base for distance codes 0..29 */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577}; + static const short dext[30] = { /* Extra bits for distance codes 0..29 */ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, + 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, + 12, 12, 13, 13}; + + /* decode literals and length/distance pairs */ + do { + symbol = decode(s, lencode); + if (symbol < 0) + return symbol; /* invalid symbol */ + if (symbol < 256) { /* literal: symbol is the byte */ + /* write out the literal */ + if (s->out != NIL) { + if (s->outcnt == s->outlen) + return 1; + s->out[s->outcnt] = symbol; + } + s->outcnt++; + } + else if (symbol > 256) { /* length */ + /* get and compute length */ + symbol -= 257; + if (symbol >= 29) + return -10; /* invalid fixed code */ + len = lens[symbol] + bits(s, lext[symbol]); + + /* get and check distance */ + symbol = decode(s, distcode); + if (symbol < 0) + return symbol; /* invalid symbol */ + dist = dists[symbol] + bits(s, dext[symbol]); +#ifndef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + if (dist > s->outcnt) + return -11; /* distance too far back */ +#endif + + /* copy length bytes from distance bytes back */ + if (s->out != NIL) { + if (s->outcnt + len > s->outlen) + return 1; + while (len--) { + s->out[s->outcnt] = +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + dist > s->outcnt ? + 0 : +#endif + s->out[s->outcnt - dist]; + s->outcnt++; + } + } + else + s->outcnt += len; + } + } while (symbol != 256); /* end of block symbol */ + + /* done with a valid fixed or dynamic block */ + return 0; +} + +/* + * Process a fixed codes block. + * + * Format notes: + * + * - This block type can be useful for compressing small amounts of data for + * which the size of the code descriptions in a dynamic block exceeds the + * benefit of custom codes for that block. For fixed codes, no bits are + * spent on code descriptions. Instead the code lengths for literal/length + * codes and distance codes are fixed. The specific lengths for each symbol + * can be seen in the "for" loops below. + * + * - The literal/length code is complete, but has two symbols that are invalid + * and should result in an error if received. This cannot be implemented + * simply as an incomplete code since those two symbols are in the "middle" + * of the code. They are eight bits long and the longest literal/length\ + * code is nine bits. Therefore the code must be constructed with those + * symbols, and the invalid symbols must be detected after decoding. + * + * - The fixed distance codes also have two invalid symbols that should result + * in an error if received. Since all of the distance codes are the same + * length, this can be implemented as an incomplete code. Then the invalid + * codes are detected while decoding. + */ +local int fixed(struct state *s) +{ + static int virgin = 1; + static short lencnt[MAXBITS+1], lensym[FIXLCODES]; + static short distcnt[MAXBITS+1], distsym[MAXDCODES]; + static struct huffman lencode, distcode; + + /* build fixed huffman tables if first call (may not be thread safe) */ + if (virgin) { + int symbol; + short lengths[FIXLCODES]; + + /* construct lencode and distcode */ + lencode.count = lencnt; + lencode.symbol = lensym; + distcode.count = distcnt; + distcode.symbol = distsym; + + /* literal/length table */ + for (symbol = 0; symbol < 144; symbol++) + lengths[symbol] = 8; + for (; symbol < 256; symbol++) + lengths[symbol] = 9; + for (; symbol < 280; symbol++) + lengths[symbol] = 7; + for (; symbol < FIXLCODES; symbol++) + lengths[symbol] = 8; + construct(&lencode, lengths, FIXLCODES); + + /* distance table */ + for (symbol = 0; symbol < MAXDCODES; symbol++) + lengths[symbol] = 5; + construct(&distcode, lengths, MAXDCODES); + + /* do this just once */ + virgin = 0; + } + + /* decode data until end-of-block code */ + return codes(s, &lencode, &distcode); +} + +/* + * Process a dynamic codes block. + * + * Format notes: + * + * - A dynamic block starts with a description of the literal/length and + * distance codes for that block. New dynamic blocks allow the compressor to + * rapidly adapt to changing data with new codes optimized for that data. + * + * - The codes used by the deflate format are "canonical", which means that + * the actual bits of the codes are generated in an unambiguous way simply + * from the number of bits in each code. Therefore the code descriptions + * are simply a list of code lengths for each symbol. + * + * - The code lengths are stored in order for the symbols, so lengths are + * provided for each of the literal/length symbols, and for each of the + * distance symbols. + * + * - If a symbol is not used in the block, this is represented by a zero as + * as the code length. This does not mean a zero-length code, but rather + * that no code should be created for this symbol. There is no way in the + * deflate format to represent a zero-length code. + * + * - The maximum number of bits in a code is 15, so the possible lengths for + * any code are 1..15. + * + * - The fact that a length of zero is not permitted for a code has an + * interesting consequence. Normally if only one symbol is used for a given + * code, then in fact that code could be represented with zero bits. However + * in deflate, that code has to be at least one bit. So for example, if + * only a single distance base symbol appears in a block, then it will be + * represented by a single code of length one, in particular one 0 bit. This + * is an incomplete code, since if a 1 bit is received, it has no meaning, + * and should result in an error. So incomplete distance codes of one symbol + * should be permitted, and the receipt of invalid codes should be handled. + * + * - It is also possible to have a single literal/length code, but that code + * must be the end-of-block code, since every dynamic block has one. This + * is not the most efficient way to create an empty block (an empty fixed + * block is fewer bits), but it is allowed by the format. So incomplete + * literal/length codes of one symbol should also be permitted. + * + * - If there are only literal codes and no lengths, then there are no distance + * codes. This is represented by one distance code with zero bits. + * + * - The list of up to 286 length/literal lengths and up to 30 distance lengths + * are themselves compressed using Huffman codes and run-length encoding. In + * the list of code lengths, a 0 symbol means no code, a 1..15 symbol means + * that length, and the symbols 16, 17, and 18 are run-length instructions. + * Each of 16, 17, and 18 are follwed by extra bits to define the length of + * the run. 16 copies the last length 3 to 6 times. 17 represents 3 to 10 + * zero lengths, and 18 represents 11 to 138 zero lengths. Unused symbols + * are common, hence the special coding for zero lengths. + * + * - The symbols for 0..18 are Huffman coded, and so that code must be + * described first. This is simply a sequence of up to 19 three-bit values + * representing no code (0) or the code length for that symbol (1..7). + * + * - A dynamic block starts with three fixed-size counts from which is computed + * the number of literal/length code lengths, the number of distance code + * lengths, and the number of code length code lengths (ok, you come up with + * a better name!) in the code descriptions. For the literal/length and + * distance codes, lengths after those provided are considered zero, i.e. no + * code. The code length code lengths are received in a permuted order (see + * the order[] array below) to make a short code length code length list more + * likely. As it turns out, very short and very long codes are less likely + * to be seen in a dynamic code description, hence what may appear initially + * to be a peculiar ordering. + * + * - Given the number of literal/length code lengths (nlen) and distance code + * lengths (ndist), then they are treated as one long list of nlen + ndist + * code lengths. Therefore run-length coding can and often does cross the + * boundary between the two sets of lengths. + * + * - So to summarize, the code description at the start of a dynamic block is + * three counts for the number of code lengths for the literal/length codes, + * the distance codes, and the code length codes. This is followed by the + * code length code lengths, three bits each. This is used to construct the + * code length code which is used to read the remainder of the lengths. Then + * the literal/length code lengths and distance lengths are read as a single + * set of lengths using the code length codes. Codes are constructed from + * the resulting two sets of lengths, and then finally you can start + * decoding actual compressed data in the block. + * + * - For reference, a "typical" size for the code description in a dynamic + * block is around 80 bytes. + */ +local int dynamic(struct state *s) +{ + int nlen, ndist, ncode; /* number of lengths in descriptor */ + int index; /* index of lengths[] */ + int err; /* construct() return value */ + short lengths[MAXCODES]; /* descriptor code lengths */ + short lencnt[MAXBITS+1], lensym[MAXLCODES]; /* lencode memory */ + short distcnt[MAXBITS+1], distsym[MAXDCODES]; /* distcode memory */ + struct huffman lencode, distcode; /* length and distance codes */ + static const short order[19] = /* permutation of code length codes */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + /* construct lencode and distcode */ + lencode.count = lencnt; + lencode.symbol = lensym; + distcode.count = distcnt; + distcode.symbol = distsym; + + /* get number of lengths in each table, check lengths */ + nlen = bits(s, 5) + 257; + ndist = bits(s, 5) + 1; + ncode = bits(s, 4) + 4; + if (nlen > MAXLCODES || ndist > MAXDCODES) + return -3; /* bad counts */ + + /* read code length code lengths (really), missing lengths are zero */ + for (index = 0; index < ncode; index++) + lengths[order[index]] = bits(s, 3); + for (; index < 19; index++) + lengths[order[index]] = 0; + + /* build huffman table for code lengths codes (use lencode temporarily) */ + err = construct(&lencode, lengths, 19); + if (err != 0) /* require complete code set here */ + return -4; + + /* read length/literal and distance code length tables */ + index = 0; + while (index < nlen + ndist) { + int symbol; /* decoded value */ + int len; /* last length to repeat */ + + symbol = decode(s, &lencode); + if (symbol < 0) + return symbol; /* invalid symbol */ + if (symbol < 16) /* length in 0..15 */ + lengths[index++] = symbol; + else { /* repeat instruction */ + len = 0; /* assume repeating zeros */ + if (symbol == 16) { /* repeat last length 3..6 times */ + if (index == 0) + return -5; /* no last length! */ + len = lengths[index - 1]; /* last length */ + symbol = 3 + bits(s, 2); + } + else if (symbol == 17) /* repeat zero 3..10 times */ + symbol = 3 + bits(s, 3); + else /* == 18, repeat zero 11..138 times */ + symbol = 11 + bits(s, 7); + if (index + symbol > nlen + ndist) + return -6; /* too many lengths! */ + while (symbol--) /* repeat last or zero symbol times */ + lengths[index++] = len; + } + } + + /* check for end-of-block code -- there better be one! */ + if (lengths[256] == 0) + return -9; + + /* build huffman table for literal/length codes */ + err = construct(&lencode, lengths, nlen); + if (err && (err < 0 || nlen != lencode.count[0] + lencode.count[1])) + return -7; /* incomplete code ok only for single length 1 code */ + + /* build huffman table for distance codes */ + err = construct(&distcode, lengths + nlen, ndist); + if (err && (err < 0 || ndist != distcode.count[0] + distcode.count[1])) + return -8; /* incomplete code ok only for single length 1 code */ + + /* decode data until end-of-block code */ + return codes(s, &lencode, &distcode); +} + +/* + * Inflate source to dest. On return, destlen and sourcelen are updated to the + * size of the uncompressed data and the size of the deflate data respectively. + * On success, the return value of puff() is zero. If there is an error in the + * source data, i.e. it is not in the deflate format, then a negative value is + * returned. If there is not enough input available or there is not enough + * output space, then a positive error is returned. In that case, destlen and + * sourcelen are not updated to facilitate retrying from the beginning with the + * provision of more input data or more output space. In the case of invalid + * inflate data (a negative error), the dest and source pointers are updated to + * facilitate the debugging of deflators. + * + * puff() also has a mode to determine the size of the uncompressed output with + * no output written. For this dest must be (unsigned char *)0. In this case, + * the input value of *destlen is ignored, and on return *destlen is set to the + * size of the uncompressed output. + * + * The return codes are: + * + * 2: available inflate data did not terminate + * 1: output space exhausted before completing inflate + * 0: successful inflate + * -1: invalid block type (type == 3) + * -2: stored block length did not match one's complement + * -3: dynamic block code description: too many length or distance codes + * -4: dynamic block code description: code lengths codes incomplete + * -5: dynamic block code description: repeat lengths with no first length + * -6: dynamic block code description: repeat more than specified lengths + * -7: dynamic block code description: invalid literal/length code lengths + * -8: dynamic block code description: invalid distance code lengths + * -9: dynamic block code description: missing end-of-block code + * -10: invalid literal/length or distance code in fixed or dynamic block + * -11: distance is too far back in fixed or dynamic block + * + * Format notes: + * + * - Three bits are read for each block to determine the kind of block and + * whether or not it is the last block. Then the block is decoded and the + * process repeated if it was not the last block. + * + * - The leftover bits in the last byte of the deflate data after the last + * block (if it was a fixed or dynamic block) are undefined and have no + * expected values to check. + */ +int puff(unsigned char *dest, /* pointer to destination pointer */ + unsigned long *destlen, /* amount of output space */ + const unsigned char *source, /* pointer to source data pointer */ + unsigned long *sourcelen) /* amount of input available */ +{ + struct state s; /* input/output state */ + int last, type; /* block information */ + int err; /* return value */ + + /* initialize output state */ + s.out = dest; + s.outlen = *destlen; /* ignored if dest is NIL */ + s.outcnt = 0; + + /* initialize input state */ + s.in = source; + s.inlen = *sourcelen; + s.incnt = 0; + s.bitbuf = 0; + s.bitcnt = 0; + + /* return if bits() or decode() tries to read past available input */ + if (setjmp(s.env) != 0) /* if came back here via longjmp() */ + err = 2; /* then skip do-loop, return error */ + else { + /* process blocks until last block or error */ + do { + last = bits(&s, 1); /* one if last block */ + type = bits(&s, 2); /* block type 0..3 */ + err = type == 0 ? + stored(&s) : + (type == 1 ? + fixed(&s) : + (type == 2 ? + dynamic(&s) : + -1)); /* type == 3, invalid */ + if (err != 0) + break; /* return with error */ + } while (!last); + } + + /* update the lengths and return */ + if (err <= 0) { + *destlen = s.outcnt; + *sourcelen = s.incnt; + } + return err; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/puff/puff.h b/src/SDL2/external/zlib-1.2.8/contrib/puff/puff.h new file mode 100644 index 000000000..e23a24543 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/puff/puff.h @@ -0,0 +1,35 @@ +/* puff.h + Copyright (C) 2002-2013 Mark Adler, all rights reserved + version 2.3, 21 Jan 2013 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + + +/* + * See puff.c for purpose and usage. + */ +#ifndef NIL +# define NIL ((unsigned char *)0) /* for no output option */ +#endif + +int puff(unsigned char *dest, /* pointer to destination pointer */ + unsigned long *destlen, /* amount of output space */ + const unsigned char *source, /* pointer to source data pointer */ + unsigned long *sourcelen); /* amount of input available */ diff --git a/src/SDL2/external/zlib-1.2.8/contrib/puff/pufftest.c b/src/SDL2/external/zlib-1.2.8/contrib/puff/pufftest.c new file mode 100644 index 000000000..776481488 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/puff/pufftest.c @@ -0,0 +1,165 @@ +/* + * pufftest.c + * Copyright (C) 2002-2013 Mark Adler + * For conditions of distribution and use, see copyright notice in puff.h + * version 2.3, 21 Jan 2013 + */ + +/* Example of how to use puff(). + + Usage: puff [-w] [-f] [-nnn] file + ... | puff [-w] [-f] [-nnn] + + where file is the input file with deflate data, nnn is the number of bytes + of input to skip before inflating (e.g. to skip a zlib or gzip header), and + -w is used to write the decompressed data to stdout. -f is for coverage + testing, and causes pufftest to fail with not enough output space (-f does + a write like -w, so -w is not required). */ + +#include +#include +#include "puff.h" + +#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) +# include +# include +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +#define local static + +/* Return size times approximately the cube root of 2, keeping the result as 1, + 3, or 5 times a power of 2 -- the result is always > size, until the result + is the maximum value of an unsigned long, where it remains. This is useful + to keep reallocations less than ~33% over the actual data. */ +local size_t bythirds(size_t size) +{ + int n; + size_t m; + + m = size; + for (n = 0; m; n++) + m >>= 1; + if (n < 3) + return size + 1; + n -= 3; + m = size >> n; + m += m == 6 ? 2 : 1; + m <<= n; + return m > size ? m : (size_t)(-1); +} + +/* Read the input file *name, or stdin if name is NULL, into allocated memory. + Reallocate to larger buffers until the entire file is read in. Return a + pointer to the allocated data, or NULL if there was a memory allocation + failure. *len is the number of bytes of data read from the input file (even + if load() returns NULL). If the input file was empty or could not be opened + or read, *len is zero. */ +local void *load(const char *name, size_t *len) +{ + size_t size; + void *buf, *swap; + FILE *in; + + *len = 0; + buf = malloc(size = 4096); + if (buf == NULL) + return NULL; + in = name == NULL ? stdin : fopen(name, "rb"); + if (in != NULL) { + for (;;) { + *len += fread((char *)buf + *len, 1, size - *len, in); + if (*len < size) break; + size = bythirds(size); + if (size == *len || (swap = realloc(buf, size)) == NULL) { + free(buf); + buf = NULL; + break; + } + buf = swap; + } + fclose(in); + } + return buf; +} + +int main(int argc, char **argv) +{ + int ret, put = 0, fail = 0; + unsigned skip = 0; + char *arg, *name = NULL; + unsigned char *source = NULL, *dest; + size_t len = 0; + unsigned long sourcelen, destlen; + + /* process arguments */ + while (arg = *++argv, --argc) + if (arg[0] == '-') { + if (arg[1] == 'w' && arg[2] == 0) + put = 1; + else if (arg[1] == 'f' && arg[2] == 0) + fail = 1, put = 1; + else if (arg[1] >= '0' && arg[1] <= '9') + skip = (unsigned)atoi(arg + 1); + else { + fprintf(stderr, "invalid option %s\n", arg); + return 3; + } + } + else if (name != NULL) { + fprintf(stderr, "only one file name allowed\n"); + return 3; + } + else + name = arg; + source = load(name, &len); + if (source == NULL) { + fprintf(stderr, "memory allocation failure\n"); + return 4; + } + if (len == 0) { + fprintf(stderr, "could not read %s, or it was empty\n", + name == NULL ? "" : name); + free(source); + return 3; + } + if (skip >= len) { + fprintf(stderr, "skip request of %d leaves no input\n", skip); + free(source); + return 3; + } + + /* test inflate data with offset skip */ + len -= skip; + sourcelen = (unsigned long)len; + ret = puff(NIL, &destlen, source + skip, &sourcelen); + if (ret) + fprintf(stderr, "puff() failed with return code %d\n", ret); + else { + fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen); + if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n", + len - sourcelen); + } + + /* if requested, inflate again and write decompressd data to stdout */ + if (put && ret == 0) { + if (fail) + destlen >>= 1; + dest = malloc(destlen); + if (dest == NULL) { + fprintf(stderr, "memory allocation failure\n"); + free(source); + return 4; + } + puff(dest, &destlen, source + skip, &sourcelen); + SET_BINARY_MODE(stdout); + fwrite(dest, 1, destlen, stdout); + free(dest); + } + + /* clean up */ + free(source); + return ret; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/puff/zeros.raw b/src/SDL2/external/zlib-1.2.8/contrib/puff/zeros.raw new file mode 100644 index 0000000000000000000000000000000000000000..0a90e76b300205a44a0ecbf613e64aaaef2e51e7 GIT binary patch literal 2517 zcmYdFkYHV$AkxzmXu#!mP=i#?5{3o^3jqcYc(h*%Opg+yAut*OqaiT#LSPd+y9&tF zP5<`ixi4UXdB8xJfs^6ee;AkH?VUytyFsD;HLIJ(gg5bUnNh}Q2#kinXb22!2pr%5 E0JRq+;s5{u literal 0 HcmV?d00001 diff --git a/src/SDL2/external/zlib-1.2.8/contrib/testzlib/testzlib.c b/src/SDL2/external/zlib-1.2.8/contrib/testzlib/testzlib.c new file mode 100644 index 000000000..5f659dea0 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/testzlib/testzlib.c @@ -0,0 +1,275 @@ +#include +#include +#include + +#include "zlib.h" + + +void MyDoMinus64(LARGE_INTEGER *R,LARGE_INTEGER A,LARGE_INTEGER B) +{ + R->HighPart = A.HighPart - B.HighPart; + if (A.LowPart >= B.LowPart) + R->LowPart = A.LowPart - B.LowPart; + else + { + R->LowPart = A.LowPart - B.LowPart; + R->HighPart --; + } +} + +#ifdef _M_X64 +// see http://msdn2.microsoft.com/library/twchhe95(en-us,vs.80).aspx for __rdtsc +unsigned __int64 __rdtsc(void); +void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64) +{ + // printf("rdtsc = %I64x\n",__rdtsc()); + pbeginTime64->QuadPart=__rdtsc(); +} + +LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER LIres; + unsigned _int64 res=__rdtsc()-((unsigned _int64)(beginTime64.QuadPart)); + LIres.QuadPart=res; + // printf("rdtsc = %I64x\n",__rdtsc()); + return LIres; +} +#else +#ifdef _M_IX86 +void myGetRDTSC32(LARGE_INTEGER * pbeginTime64) +{ + DWORD dwEdx,dwEax; + _asm + { + rdtsc + mov dwEax,eax + mov dwEdx,edx + } + pbeginTime64->LowPart=dwEax; + pbeginTime64->HighPart=dwEdx; +} + +void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64) +{ + myGetRDTSC32(pbeginTime64); +} + +LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER LIres,endTime64; + myGetRDTSC32(&endTime64); + + LIres.LowPart=LIres.HighPart=0; + MyDoMinus64(&LIres,endTime64,beginTime64); + return LIres; +} +#else +void myGetRDTSC32(LARGE_INTEGER * pbeginTime64) +{ +} + +void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64) +{ +} + +LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER lr; + lr.QuadPart=0; + return lr; +} +#endif +#endif + +void BeginCountPerfCounter(LARGE_INTEGER * pbeginTime64,BOOL fComputeTimeQueryPerf) +{ + if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(pbeginTime64))) + { + pbeginTime64->LowPart = GetTickCount(); + pbeginTime64->HighPart = 0; + } +} + +DWORD GetMsecSincePerfCounter(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER endTime64,ticksPerSecond,ticks; + DWORDLONG ticksShifted,tickSecShifted; + DWORD dwLog=16+0; + DWORD dwRet; + if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(&endTime64))) + dwRet = (GetTickCount() - beginTime64.LowPart)*1; + else + { + MyDoMinus64(&ticks,endTime64,beginTime64); + QueryPerformanceFrequency(&ticksPerSecond); + + + { + ticksShifted = Int64ShrlMod32(*(DWORDLONG*)&ticks,dwLog); + tickSecShifted = Int64ShrlMod32(*(DWORDLONG*)&ticksPerSecond,dwLog); + + } + + dwRet = (DWORD)((((DWORD)ticksShifted)*1000)/(DWORD)(tickSecShifted)); + dwRet *=1; + } + return dwRet; +} + +int ReadFileMemory(const char* filename,long* plFileSize,unsigned char** pFilePtr) +{ + FILE* stream; + unsigned char* ptr; + int retVal=1; + stream=fopen(filename, "rb"); + if (stream==NULL) + return 0; + + fseek(stream,0,SEEK_END); + + *plFileSize=ftell(stream); + fseek(stream,0,SEEK_SET); + ptr=malloc((*plFileSize)+1); + if (ptr==NULL) + retVal=0; + else + { + if (fread(ptr, 1, *plFileSize,stream) != (*plFileSize)) + retVal=0; + } + fclose(stream); + *pFilePtr=ptr; + return retVal; +} + +int main(int argc, char *argv[]) +{ + int BlockSizeCompress=0x8000; + int BlockSizeUncompress=0x8000; + int cprLevel=Z_DEFAULT_COMPRESSION ; + long lFileSize; + unsigned char* FilePtr; + long lBufferSizeCpr; + long lBufferSizeUncpr; + long lCompressedSize=0; + unsigned char* CprPtr; + unsigned char* UncprPtr; + long lSizeCpr,lSizeUncpr; + DWORD dwGetTick,dwMsecQP; + LARGE_INTEGER li_qp,li_rdtsc,dwResRdtsc; + + if (argc<=1) + { + printf("run TestZlib [BlockSizeCompress] [BlockSizeUncompress] [compres. level]\n"); + return 0; + } + + if (ReadFileMemory(argv[1],&lFileSize,&FilePtr)==0) + { + printf("error reading %s\n",argv[1]); + return 1; + } + else printf("file %s read, %u bytes\n",argv[1],lFileSize); + + if (argc>=3) + BlockSizeCompress=atol(argv[2]); + + if (argc>=4) + BlockSizeUncompress=atol(argv[3]); + + if (argc>=5) + cprLevel=(int)atol(argv[4]); + + lBufferSizeCpr = lFileSize + (lFileSize/0x10) + 0x200; + lBufferSizeUncpr = lBufferSizeCpr; + + CprPtr=(unsigned char*)malloc(lBufferSizeCpr + BlockSizeCompress); + + BeginCountPerfCounter(&li_qp,TRUE); + dwGetTick=GetTickCount(); + BeginCountRdtsc(&li_rdtsc); + { + z_stream zcpr; + int ret=Z_OK; + long lOrigToDo = lFileSize; + long lOrigDone = 0; + int step=0; + memset(&zcpr,0,sizeof(z_stream)); + deflateInit(&zcpr,cprLevel); + + zcpr.next_in = FilePtr; + zcpr.next_out = CprPtr; + + + do + { + long all_read_before = zcpr.total_in; + zcpr.avail_in = min(lOrigToDo,BlockSizeCompress); + zcpr.avail_out = BlockSizeCompress; + ret=deflate(&zcpr,(zcpr.avail_in==lOrigToDo) ? Z_FINISH : Z_SYNC_FLUSH); + lOrigDone += (zcpr.total_in-all_read_before); + lOrigToDo -= (zcpr.total_in-all_read_before); + step++; + } while (ret==Z_OK); + + lSizeCpr=zcpr.total_out; + deflateEnd(&zcpr); + dwGetTick=GetTickCount()-dwGetTick; + dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE); + dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE); + printf("total compress size = %u, in %u step\n",lSizeCpr,step); + printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.); + printf("defcpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.); + printf("defcpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart); + } + + CprPtr=(unsigned char*)realloc(CprPtr,lSizeCpr); + UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress); + + BeginCountPerfCounter(&li_qp,TRUE); + dwGetTick=GetTickCount(); + BeginCountRdtsc(&li_rdtsc); + { + z_stream zcpr; + int ret=Z_OK; + long lOrigToDo = lSizeCpr; + long lOrigDone = 0; + int step=0; + memset(&zcpr,0,sizeof(z_stream)); + inflateInit(&zcpr); + + zcpr.next_in = CprPtr; + zcpr.next_out = UncprPtr; + + + do + { + long all_read_before = zcpr.total_in; + zcpr.avail_in = min(lOrigToDo,BlockSizeUncompress); + zcpr.avail_out = BlockSizeUncompress; + ret=inflate(&zcpr,Z_SYNC_FLUSH); + lOrigDone += (zcpr.total_in-all_read_before); + lOrigToDo -= (zcpr.total_in-all_read_before); + step++; + } while (ret==Z_OK); + + lSizeUncpr=zcpr.total_out; + inflateEnd(&zcpr); + dwGetTick=GetTickCount()-dwGetTick; + dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE); + dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE); + printf("total uncompress size = %u, in %u step\n",lSizeUncpr,step); + printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.); + printf("uncpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.); + printf("uncpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart); + } + + if (lSizeUncpr==lFileSize) + { + if (memcmp(FilePtr,UncprPtr,lFileSize)==0) + printf("compare ok\n"); + + } + + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/testzlib/testzlib.txt b/src/SDL2/external/zlib-1.2.8/contrib/testzlib/testzlib.txt new file mode 100644 index 000000000..62258f149 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/testzlib/testzlib.txt @@ -0,0 +1,10 @@ +To build testzLib with Visual Studio 2005: + +copy to a directory file from : +- root of zLib tree +- contrib/testzlib +- contrib/masmx86 +- contrib/masmx64 +- contrib/vstudio/vc7 + +and open testzlib8.sln \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/untgz/Makefile.msc b/src/SDL2/external/zlib-1.2.8/contrib/untgz/Makefile.msc new file mode 100644 index 000000000..77b860221 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/untgz/Makefile.msc @@ -0,0 +1,17 @@ +CC=cl +CFLAGS=-MD + +untgz.exe: untgz.obj ..\..\zlib.lib + $(CC) $(CFLAGS) untgz.obj ..\..\zlib.lib + +untgz.obj: untgz.c ..\..\zlib.h + $(CC) $(CFLAGS) -c -I..\.. untgz.c + +..\..\zlib.lib: + cd ..\.. + $(MAKE) -f win32\makefile.msc + cd contrib\untgz + +clean: + -del untgz.obj + -del untgz.exe diff --git a/src/SDL2/external/zlib-1.2.8/contrib/untgz/untgz.c b/src/SDL2/external/zlib-1.2.8/contrib/untgz/untgz.c new file mode 100644 index 000000000..2c391e598 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/untgz/untgz.c @@ -0,0 +1,674 @@ +/* + * untgz.c -- Display contents and extract files from a gzip'd TAR file + * + * written by Pedro A. Aranda Gutierrez + * adaptation to Unix by Jean-loup Gailly + * various fixes by Cosmin Truta + */ + +#include +#include +#include +#include +#include + +#include "zlib.h" + +#ifdef unix +# include +#else +# include +# include +#endif + +#ifdef WIN32 +#include +# ifndef F_OK +# define F_OK 0 +# endif +# define mkdir(dirname,mode) _mkdir(dirname) +# ifdef _MSC_VER +# define access(path,mode) _access(path,mode) +# define chmod(path,mode) _chmod(path,mode) +# define strdup(str) _strdup(str) +# endif +#else +# include +#endif + + +/* values used in typeflag field */ + +#define REGTYPE '0' /* regular file */ +#define AREGTYPE '\0' /* regular file */ +#define LNKTYPE '1' /* link */ +#define SYMTYPE '2' /* reserved */ +#define CHRTYPE '3' /* character special */ +#define BLKTYPE '4' /* block special */ +#define DIRTYPE '5' /* directory */ +#define FIFOTYPE '6' /* FIFO special */ +#define CONTTYPE '7' /* reserved */ + +/* GNU tar extensions */ + +#define GNUTYPE_DUMPDIR 'D' /* file names from dumped directory */ +#define GNUTYPE_LONGLINK 'K' /* long link name */ +#define GNUTYPE_LONGNAME 'L' /* long file name */ +#define GNUTYPE_MULTIVOL 'M' /* continuation of file from another volume */ +#define GNUTYPE_NAMES 'N' /* file name that does not fit into main hdr */ +#define GNUTYPE_SPARSE 'S' /* sparse file */ +#define GNUTYPE_VOLHDR 'V' /* tape/volume header */ + + +/* tar header */ + +#define BLOCKSIZE 512 +#define SHORTNAMESIZE 100 + +struct tar_header +{ /* byte offset */ + char name[100]; /* 0 */ + char mode[8]; /* 100 */ + char uid[8]; /* 108 */ + char gid[8]; /* 116 */ + char size[12]; /* 124 */ + char mtime[12]; /* 136 */ + char chksum[8]; /* 148 */ + char typeflag; /* 156 */ + char linkname[100]; /* 157 */ + char magic[6]; /* 257 */ + char version[2]; /* 263 */ + char uname[32]; /* 265 */ + char gname[32]; /* 297 */ + char devmajor[8]; /* 329 */ + char devminor[8]; /* 337 */ + char prefix[155]; /* 345 */ + /* 500 */ +}; + +union tar_buffer +{ + char buffer[BLOCKSIZE]; + struct tar_header header; +}; + +struct attr_item +{ + struct attr_item *next; + char *fname; + int mode; + time_t time; +}; + +enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID }; + +char *TGZfname OF((const char *)); +void TGZnotfound OF((const char *)); + +int getoct OF((char *, int)); +char *strtime OF((time_t *)); +int setfiletime OF((char *, time_t)); +void push_attr OF((struct attr_item **, char *, int, time_t)); +void restore_attr OF((struct attr_item **)); + +int ExprMatch OF((char *, char *)); + +int makedir OF((char *)); +int matchname OF((int, int, char **, char *)); + +void error OF((const char *)); +int tar OF((gzFile, int, int, int, char **)); + +void help OF((int)); +int main OF((int, char **)); + +char *prog; + +const char *TGZsuffix[] = { "\0", ".tar", ".tar.gz", ".taz", ".tgz", NULL }; + +/* return the file name of the TGZ archive */ +/* or NULL if it does not exist */ + +char *TGZfname (const char *arcname) +{ + static char buffer[1024]; + int origlen,i; + + strcpy(buffer,arcname); + origlen = strlen(buffer); + + for (i=0; TGZsuffix[i]; i++) + { + strcpy(buffer+origlen,TGZsuffix[i]); + if (access(buffer,F_OK) == 0) + return buffer; + } + return NULL; +} + + +/* error message for the filename */ + +void TGZnotfound (const char *arcname) +{ + int i; + + fprintf(stderr,"%s: Couldn't find ",prog); + for (i=0;TGZsuffix[i];i++) + fprintf(stderr,(TGZsuffix[i+1]) ? "%s%s, " : "or %s%s\n", + arcname, + TGZsuffix[i]); + exit(1); +} + + +/* convert octal digits to int */ +/* on error return -1 */ + +int getoct (char *p,int width) +{ + int result = 0; + char c; + + while (width--) + { + c = *p++; + if (c == 0) + break; + if (c == ' ') + continue; + if (c < '0' || c > '7') + return -1; + result = result * 8 + (c - '0'); + } + return result; +} + + +/* convert time_t to string */ +/* use the "YYYY/MM/DD hh:mm:ss" format */ + +char *strtime (time_t *t) +{ + struct tm *local; + static char result[32]; + + local = localtime(t); + sprintf(result,"%4d/%02d/%02d %02d:%02d:%02d", + local->tm_year+1900, local->tm_mon+1, local->tm_mday, + local->tm_hour, local->tm_min, local->tm_sec); + return result; +} + + +/* set file time */ + +int setfiletime (char *fname,time_t ftime) +{ +#ifdef WIN32 + static int isWinNT = -1; + SYSTEMTIME st; + FILETIME locft, modft; + struct tm *loctm; + HANDLE hFile; + int result; + + loctm = localtime(&ftime); + if (loctm == NULL) + return -1; + + st.wYear = (WORD)loctm->tm_year + 1900; + st.wMonth = (WORD)loctm->tm_mon + 1; + st.wDayOfWeek = (WORD)loctm->tm_wday; + st.wDay = (WORD)loctm->tm_mday; + st.wHour = (WORD)loctm->tm_hour; + st.wMinute = (WORD)loctm->tm_min; + st.wSecond = (WORD)loctm->tm_sec; + st.wMilliseconds = 0; + if (!SystemTimeToFileTime(&st, &locft) || + !LocalFileTimeToFileTime(&locft, &modft)) + return -1; + + if (isWinNT < 0) + isWinNT = (GetVersion() < 0x80000000) ? 1 : 0; + hFile = CreateFile(fname, GENERIC_WRITE, 0, NULL, OPEN_EXISTING, + (isWinNT ? FILE_FLAG_BACKUP_SEMANTICS : 0), + NULL); + if (hFile == INVALID_HANDLE_VALUE) + return -1; + result = SetFileTime(hFile, NULL, NULL, &modft) ? 0 : -1; + CloseHandle(hFile); + return result; +#else + struct utimbuf settime; + + settime.actime = settime.modtime = ftime; + return utime(fname,&settime); +#endif +} + + +/* push file attributes */ + +void push_attr(struct attr_item **list,char *fname,int mode,time_t time) +{ + struct attr_item *item; + + item = (struct attr_item *)malloc(sizeof(struct attr_item)); + if (item == NULL) + error("Out of memory"); + item->fname = strdup(fname); + item->mode = mode; + item->time = time; + item->next = *list; + *list = item; +} + + +/* restore file attributes */ + +void restore_attr(struct attr_item **list) +{ + struct attr_item *item, *prev; + + for (item = *list; item != NULL; ) + { + setfiletime(item->fname,item->time); + chmod(item->fname,item->mode); + prev = item; + item = item->next; + free(prev); + } + *list = NULL; +} + + +/* match regular expression */ + +#define ISSPECIAL(c) (((c) == '*') || ((c) == '/')) + +int ExprMatch (char *string,char *expr) +{ + while (1) + { + if (ISSPECIAL(*expr)) + { + if (*expr == '/') + { + if (*string != '\\' && *string != '/') + return 0; + string ++; expr++; + } + else if (*expr == '*') + { + if (*expr ++ == 0) + return 1; + while (*++string != *expr) + if (*string == 0) + return 0; + } + } + else + { + if (*string != *expr) + return 0; + if (*expr++ == 0) + return 1; + string++; + } + } +} + + +/* recursive mkdir */ +/* abort on ENOENT; ignore other errors like "directory already exists" */ +/* return 1 if OK */ +/* 0 on error */ + +int makedir (char *newdir) +{ + char *buffer = strdup(newdir); + char *p; + int len = strlen(buffer); + + if (len <= 0) { + free(buffer); + return 0; + } + if (buffer[len-1] == '/') { + buffer[len-1] = '\0'; + } + if (mkdir(buffer, 0755) == 0) + { + free(buffer); + return 1; + } + + p = buffer+1; + while (1) + { + char hold; + + while(*p && *p != '\\' && *p != '/') + p++; + hold = *p; + *p = 0; + if ((mkdir(buffer, 0755) == -1) && (errno == ENOENT)) + { + fprintf(stderr,"%s: Couldn't create directory %s\n",prog,buffer); + free(buffer); + return 0; + } + if (hold == 0) + break; + *p++ = hold; + } + free(buffer); + return 1; +} + + +int matchname (int arg,int argc,char **argv,char *fname) +{ + if (arg == argc) /* no arguments given (untgz tgzarchive) */ + return 1; + + while (arg < argc) + if (ExprMatch(fname,argv[arg++])) + return 1; + + return 0; /* ignore this for the moment being */ +} + + +/* tar file list or extract */ + +int tar (gzFile in,int action,int arg,int argc,char **argv) +{ + union tar_buffer buffer; + int len; + int err; + int getheader = 1; + int remaining = 0; + FILE *outfile = NULL; + char fname[BLOCKSIZE]; + int tarmode; + time_t tartime; + struct attr_item *attributes = NULL; + + if (action == TGZ_LIST) + printf(" date time size file\n" + " ---------- -------- --------- -------------------------------------\n"); + while (1) + { + len = gzread(in, &buffer, BLOCKSIZE); + if (len < 0) + error(gzerror(in, &err)); + /* + * Always expect complete blocks to process + * the tar information. + */ + if (len != BLOCKSIZE) + { + action = TGZ_INVALID; /* force error exit */ + remaining = 0; /* force I/O cleanup */ + } + + /* + * If we have to get a tar header + */ + if (getheader >= 1) + { + /* + * if we met the end of the tar + * or the end-of-tar block, + * we are done + */ + if (len == 0 || buffer.header.name[0] == 0) + break; + + tarmode = getoct(buffer.header.mode,8); + tartime = (time_t)getoct(buffer.header.mtime,12); + if (tarmode == -1 || tartime == (time_t)-1) + { + buffer.header.name[0] = 0; + action = TGZ_INVALID; + } + + if (getheader == 1) + { + strncpy(fname,buffer.header.name,SHORTNAMESIZE); + if (fname[SHORTNAMESIZE-1] != 0) + fname[SHORTNAMESIZE] = 0; + } + else + { + /* + * The file name is longer than SHORTNAMESIZE + */ + if (strncmp(fname,buffer.header.name,SHORTNAMESIZE-1) != 0) + error("bad long name"); + getheader = 1; + } + + /* + * Act according to the type flag + */ + switch (buffer.header.typeflag) + { + case DIRTYPE: + if (action == TGZ_LIST) + printf(" %s     %s\n",strtime(&tartime),fname); + if (action == TGZ_EXTRACT) + { + makedir(fname); + push_attr(&attributes,fname,tarmode,tartime); + } + break; + case REGTYPE: + case AREGTYPE: + remaining = getoct(buffer.header.size,12); + if (remaining == -1) + { + action = TGZ_INVALID; + break; + } + if (action == TGZ_LIST) + printf(" %s %9d %s\n",strtime(&tartime),remaining,fname); + else if (action == TGZ_EXTRACT) + { + if (matchname(arg,argc,argv,fname)) + { + outfile = fopen(fname,"wb"); + if (outfile == NULL) { + /* try creating directory */ + char *p = strrchr(fname, '/'); + if (p != NULL) { + *p = '\0'; + makedir(fname); + *p = '/'; + outfile = fopen(fname,"wb"); + } + } + if (outfile != NULL) + printf("Extracting %s\n",fname); + else + fprintf(stderr, "%s: Couldn't create %s",prog,fname); + } + else + outfile = NULL; + } + getheader = 0; + break; + case GNUTYPE_LONGLINK: + case GNUTYPE_LONGNAME: + remaining = getoct(buffer.header.size,12); + if (remaining < 0 || remaining >= BLOCKSIZE) + { + action = TGZ_INVALID; + break; + } + len = gzread(in, fname, BLOCKSIZE); + if (len < 0) + error(gzerror(in, &err)); + if (fname[BLOCKSIZE-1] != 0 || (int)strlen(fname) > remaining) + { + action = TGZ_INVALID; + break; + } + getheader = 2; + break; + default: + if (action == TGZ_LIST) + printf(" %s <---> %s\n",strtime(&tartime),fname); + break; + } + } + else + { + unsigned int bytes = (remaining > BLOCKSIZE) ? BLOCKSIZE : remaining; + + if (outfile != NULL) + { + if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes) + { + fprintf(stderr, + "%s: Error writing %s -- skipping\n",prog,fname); + fclose(outfile); + outfile = NULL; + remove(fname); + } + } + remaining -= bytes; + } + + if (remaining == 0) + { + getheader = 1; + if (outfile != NULL) + { + fclose(outfile); + outfile = NULL; + if (action != TGZ_INVALID) + push_attr(&attributes,fname,tarmode,tartime); + } + } + + /* + * Abandon if errors are found + */ + if (action == TGZ_INVALID) + { + error("broken archive"); + break; + } + } + + /* + * Restore file modes and time stamps + */ + restore_attr(&attributes); + + if (gzclose(in) != Z_OK) + error("failed gzclose"); + + return 0; +} + + +/* ============================================================ */ + +void help(int exitval) +{ + printf("untgz version 0.2.1\n" + " using zlib version %s\n\n", + zlibVersion()); + printf("Usage: untgz file.tgz extract all files\n" + " untgz file.tgz fname ... extract selected files\n" + " untgz -l file.tgz list archive contents\n" + " untgz -h display this help\n"); + exit(exitval); +} + +void error(const char *msg) +{ + fprintf(stderr, "%s: %s\n", prog, msg); + exit(1); +} + + +/* ============================================================ */ + +#if defined(WIN32) && defined(__GNUC__) +int _CRT_glob = 0; /* disable argument globbing in MinGW */ +#endif + +int main(int argc,char **argv) +{ + int action = TGZ_EXTRACT; + int arg = 1; + char *TGZfile; + gzFile *f; + + prog = strrchr(argv[0],'\\'); + if (prog == NULL) + { + prog = strrchr(argv[0],'/'); + if (prog == NULL) + { + prog = strrchr(argv[0],':'); + if (prog == NULL) + prog = argv[0]; + else + prog++; + } + else + prog++; + } + else + prog++; + + if (argc == 1) + help(0); + + if (strcmp(argv[arg],"-l") == 0) + { + action = TGZ_LIST; + if (argc == ++arg) + help(0); + } + else if (strcmp(argv[arg],"-h") == 0) + { + help(0); + } + + if ((TGZfile = TGZfname(argv[arg])) == NULL) + TGZnotfound(argv[arg]); + + ++arg; + if ((action == TGZ_LIST) && (arg != argc)) + help(1); + +/* + * Process the TGZ file + */ + switch(action) + { + case TGZ_LIST: + case TGZ_EXTRACT: + f = gzopen(TGZfile,"rb"); + if (f == NULL) + { + fprintf(stderr,"%s: Couldn't gzopen %s\n",prog,TGZfile); + return 1; + } + exit(tar(f, action, arg, argc, argv)); + break; + + default: + error("Unknown option"); + exit(1); + } + + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/readme.txt b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/readme.txt new file mode 100644 index 000000000..bfdcd9dd0 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/readme.txt @@ -0,0 +1,65 @@ +Building instructions for the DLL versions of Zlib 1.2.8 +======================================================== + +This directory contains projects that build zlib and minizip using +Microsoft Visual C++ 9.0/10.0. + +You don't need to build these projects yourself. You can download the +binaries from: + http://www.winimage.com/zLibDll + +More information can be found at this site. + + + + + +Build instructions for Visual Studio 2008 (32 bits or 64 bits) +-------------------------------------------------------------- +- Uncompress current zlib, including all contrib/* files +- Compile assembly code (with Visual Studio Command Prompt) by running: + bld_ml64.bat (in contrib\masmx64) + bld_ml32.bat (in contrib\masmx86) +- Open contrib\vstudio\vc9\zlibvc.sln with Microsoft Visual C++ 2008 +- Or run: vcbuild /rebuild contrib\vstudio\vc9\zlibvc.sln "Release|Win32" + +Build instructions for Visual Studio 2010 (32 bits or 64 bits) +-------------------------------------------------------------- +- Uncompress current zlib, including all contrib/* files +- Open contrib\vstudio\vc10\zlibvc.sln with Microsoft Visual C++ 2010 + +Build instructions for Visual Studio 2012 (32 bits or 64 bits) +-------------------------------------------------------------- +- Uncompress current zlib, including all contrib/* files +- Open contrib\vstudio\vc11\zlibvc.sln with Microsoft Visual C++ 2012 + + +Important +--------- +- To use zlibwapi.dll in your application, you must define the + macro ZLIB_WINAPI when compiling your application's source files. + + +Additional notes +---------------- +- This DLL, named zlibwapi.dll, is compatible to the old zlib.dll built + by Gilles Vollant from the zlib 1.1.x sources, and distributed at + http://www.winimage.com/zLibDll + It uses the WINAPI calling convention for the exported functions, and + includes the minizip functionality. If your application needs that + particular build of zlib.dll, you can rename zlibwapi.dll to zlib.dll. + +- The new DLL was renamed because there exist several incompatible + versions of zlib.dll on the Internet. + +- There is also an official DLL build of zlib, named zlib1.dll. This one + is exporting the functions using the CDECL convention. See the file + win32\DLL_FAQ.txt found in this zlib distribution. + +- There used to be a ZLIB_DLL macro in zlib 1.1.x, but now this symbol + has a slightly different effect. To avoid compatibility problems, do + not define it here. + + +Gilles Vollant +info@winimage.com diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj new file mode 100644 index 000000000..74e15c90d --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj @@ -0,0 +1,310 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {C52F9E7B-498A-42BE-8DB4-85A15694382A} + Win32Proj + + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\MiniUnzip$(Configuration)\ + x86\MiniUnzip$(Configuration)\Tmp\ + true + false + x86\MiniUnzip$(Configuration)\ + x86\MiniUnzip$(Configuration)\Tmp\ + false + false + x64\MiniUnzip$(Configuration)\ + x64\MiniUnzip$(Configuration)\Tmp\ + true + false + ia64\MiniUnzip$(Configuration)\ + ia64\MiniUnzip$(Configuration)\Tmp\ + true + false + x64\MiniUnzip$(Configuration)\ + x64\MiniUnzip$(Configuration)\Tmp\ + false + false + ia64\MiniUnzip$(Configuration)\ + ia64\MiniUnzip$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebug + false + + + $(IntDir) + Level3 + EditAndContinue + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj.filters b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj.filters new file mode 100644 index 000000000..0b2a3de2d --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj.filters @@ -0,0 +1,22 @@ + + + + + {048af943-022b-4db6-beeb-a54c34774ee2} + cpp;c;cxx;def;odl;idl;hpj;bat;asm + + + {c1d600d2-888f-4aea-b73e-8b0dd9befa0c} + h;hpp;hxx;hm;inl;inc + + + {0844199a-966b-4f19-81db-1e0125e141b9} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe + + + + + Source Files + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj new file mode 100644 index 000000000..917e15652 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj @@ -0,0 +1,307 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B} + Win32Proj + + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\MiniZip$(Configuration)\ + x86\MiniZip$(Configuration)\Tmp\ + true + false + x86\MiniZip$(Configuration)\ + x86\MiniZip$(Configuration)\Tmp\ + false + x64\$(Configuration)\ + x64\$(Configuration)\ + true + false + ia64\$(Configuration)\ + ia64\$(Configuration)\ + true + false + x64\$(Configuration)\ + x64\$(Configuration)\ + false + ia64\$(Configuration)\ + ia64\$(Configuration)\ + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebug + false + + + $(IntDir) + Level3 + EditAndContinue + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj.filters b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj.filters new file mode 100644 index 000000000..dd73cd313 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj.filters @@ -0,0 +1,22 @@ + + + + + {c0419b40-bf50-40da-b153-ff74215b79de} + cpp;c;cxx;def;odl;idl;hpj;bat;asm + + + {bb87b070-735b-478e-92ce-7383abb2f36c} + h;hpp;hxx;hm;inl;inc + + + {f46ab6a6-548f-43cb-ae96-681abb5bd5db} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe + + + + + Source Files + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj new file mode 100644 index 000000000..9088d176f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj @@ -0,0 +1,420 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B} + testzlib + Win32Proj + + + + Application + MultiByte + true + + + Application + MultiByte + true + + + Application + MultiByte + + + Application + MultiByte + true + + + Application + MultiByte + true + + + Application + MultiByte + + + Application + true + + + Application + true + + + Application + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + true + false + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + false + false + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + false + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + true + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + false + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebug + false + + + AssemblyAndSourceCode + $(IntDir) + Level3 + EditAndContinue + + + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)testzlib.exe + true + $(OutDir)testzlib.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)testzlib.exe + true + Console + true + true + false + + + MachineX86 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDebugDLL + false + $(IntDir) + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + + + + + Itanium + + + Disabled + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + AssemblyAndSourceCode + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + $(OutDir)testzlib.pdb + Console + MachineIA64 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDLL + false + $(IntDir) + + + %(AdditionalDependencies) + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + MachineIA64 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDLL + false + $(IntDir) + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + MachineIA64 + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj.filters b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj.filters new file mode 100644 index 000000000..249daa89c --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj.filters @@ -0,0 +1,58 @@ + + + + + {c1f6a2e3-5da5-4955-8653-310d3efe05a9} + cpp;c;cxx;def;odl;idl;hpj;bat;asm + + + {c2aaffdc-2c95-4d6f-8466-4bec5890af2c} + h;hpp;hxx;hm;inl;inc + + + {c274fe07-05f2-461c-964b-f6341e4e7eb5} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj new file mode 100644 index 000000000..bcb08ff95 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj @@ -0,0 +1,310 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {C52F9E7B-498A-42BE-8DB4-85A15694366A} + Win32Proj + + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\TestZlibDll$(Configuration)\ + x86\TestZlibDll$(Configuration)\Tmp\ + true + false + x86\TestZlibDll$(Configuration)\ + x86\TestZlibDll$(Configuration)\Tmp\ + false + false + x64\TestZlibDll$(Configuration)\ + x64\TestZlibDll$(Configuration)\Tmp\ + true + false + ia64\TestZlibDll$(Configuration)\ + ia64\TestZlibDll$(Configuration)\Tmp\ + true + false + x64\TestZlibDll$(Configuration)\ + x64\TestZlibDll$(Configuration)\Tmp\ + false + false + ia64\TestZlibDll$(Configuration)\ + ia64\TestZlibDll$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebug + false + + + $(IntDir) + Level3 + EditAndContinue + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj.filters b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj.filters new file mode 100644 index 000000000..53a8693bb --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj.filters @@ -0,0 +1,22 @@ + + + + + {fa61a89f-93fc-4c89-b29e-36224b7592f4} + cpp;c;cxx;def;odl;idl;hpj;bat;asm + + + {d4b85da0-2ba2-4934-b57f-e2584e3848ee} + h;hpp;hxx;hm;inl;inc + + + {e573e075-00bd-4a7d-bd67-a8cc9bfc5aca} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe + + + + + Source Files + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlib.rc b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlib.rc new file mode 100644 index 000000000..73f6476d6 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlib.rc @@ -0,0 +1,32 @@ +#include + +#define IDR_VERSION1 1 +IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE + FILEVERSION 1,2,8,0 + PRODUCTVERSION 1,2,8,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK + FILEFLAGS 0 + FILEOS VOS_DOS_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + + BEGIN + VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0" + VALUE "FileVersion", "1.2.8\0" + VALUE "InternalName", "zlib\0" + VALUE "OriginalFilename", "zlibwapi.dll\0" + VALUE "ProductName", "ZLib.DLL\0" + VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0" + VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj new file mode 100644 index 000000000..b9f2bbe5f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj @@ -0,0 +1,473 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8} + + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + + + MultiThreadedDebug + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)zlibstat.lib + true + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + cd ..\..\masmx64 +bld_ml64.bat + + + + + Itanium + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + $(OutDir)zlibstat.lib + true + + + cd ..\..\masmx64 +bld_ml64.bat + + + + + Itanium + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + Itanium + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj.filters b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj.filters new file mode 100644 index 000000000..c8c7f7ea3 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj.filters @@ -0,0 +1,77 @@ + + + + + {174213f6-7f66-4ae8-a3a8-a1e0a1e6ffdd} + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + + + Source Files + + + + + Source Files + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.def b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.def new file mode 100644 index 000000000..636704672 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.def @@ -0,0 +1,143 @@ +LIBRARY +; zlib data compression and ZIP file I/O library + +VERSION 1.2.8 + +EXPORTS + adler32 @1 + compress @2 + crc32 @3 + deflate @4 + deflateCopy @5 + deflateEnd @6 + deflateInit2_ @7 + deflateInit_ @8 + deflateParams @9 + deflateReset @10 + deflateSetDictionary @11 + gzclose @12 + gzdopen @13 + gzerror @14 + gzflush @15 + gzopen @16 + gzread @17 + gzwrite @18 + inflate @19 + inflateEnd @20 + inflateInit2_ @21 + inflateInit_ @22 + inflateReset @23 + inflateSetDictionary @24 + inflateSync @25 + uncompress @26 + zlibVersion @27 + gzprintf @28 + gzputc @29 + gzgetc @30 + gzseek @31 + gzrewind @32 + gztell @33 + gzeof @34 + gzsetparams @35 + zError @36 + inflateSyncPoint @37 + get_crc_table @38 + compress2 @39 + gzputs @40 + gzgets @41 + inflateCopy @42 + inflateBackInit_ @43 + inflateBack @44 + inflateBackEnd @45 + compressBound @46 + deflateBound @47 + gzclearerr @48 + gzungetc @49 + zlibCompileFlags @50 + deflatePrime @51 + deflatePending @52 + + unzOpen @61 + unzClose @62 + unzGetGlobalInfo @63 + unzGetCurrentFileInfo @64 + unzGoToFirstFile @65 + unzGoToNextFile @66 + unzOpenCurrentFile @67 + unzReadCurrentFile @68 + unzOpenCurrentFile3 @69 + unztell @70 + unzeof @71 + unzCloseCurrentFile @72 + unzGetGlobalComment @73 + unzStringFileNameCompare @74 + unzLocateFile @75 + unzGetLocalExtrafield @76 + unzOpen2 @77 + unzOpenCurrentFile2 @78 + unzOpenCurrentFilePassword @79 + + zipOpen @80 + zipOpenNewFileInZip @81 + zipWriteInFileInZip @82 + zipCloseFileInZip @83 + zipClose @84 + zipOpenNewFileInZip2 @86 + zipCloseFileInZipRaw @87 + zipOpen2 @88 + zipOpenNewFileInZip3 @89 + + unzGetFilePos @100 + unzGoToFilePos @101 + + fill_win32_filefunc @110 + +; zlibwapi v1.2.4 added: + fill_win32_filefunc64 @111 + fill_win32_filefunc64A @112 + fill_win32_filefunc64W @113 + + unzOpen64 @120 + unzOpen2_64 @121 + unzGetGlobalInfo64 @122 + unzGetCurrentFileInfo64 @124 + unzGetCurrentFileZStreamPos64 @125 + unztell64 @126 + unzGetFilePos64 @127 + unzGoToFilePos64 @128 + + zipOpen64 @130 + zipOpen2_64 @131 + zipOpenNewFileInZip64 @132 + zipOpenNewFileInZip2_64 @133 + zipOpenNewFileInZip3_64 @134 + zipOpenNewFileInZip4_64 @135 + zipCloseFileInZipRaw64 @136 + +; zlib1 v1.2.4 added: + adler32_combine @140 + crc32_combine @142 + deflateSetHeader @144 + deflateTune @145 + gzbuffer @146 + gzclose_r @147 + gzclose_w @148 + gzdirect @149 + gzoffset @150 + inflateGetHeader @156 + inflateMark @157 + inflatePrime @158 + inflateReset2 @159 + inflateUndermine @160 + +; zlib1 v1.2.6 added: + gzgetc_ @161 + inflateResetKeep @163 + deflateResetKeep @164 + +; zlib1 v1.2.7 added: + gzopen_w @165 + +; zlib1 v1.2.8 added: + inflateGetDictionary @166 + gzvprintf @167 diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.sln b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.sln new file mode 100644 index 000000000..6f6ffd5ee --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.sln @@ -0,0 +1,135 @@ + +Microsoft Visual Studio Solution File, Format Version 11.00 +# Visual Studio 2010 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcxproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcxproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcxproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlibdll", "testzlibdll.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcxproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Itanium = Debug|Itanium + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Itanium = Release|Itanium + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium + ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32 + ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.Build.0 = Debug|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.Build.0 = Release|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.Build.0 = Debug|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.Build.0 = Release|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.Build.0 = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.Build.0 = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj new file mode 100644 index 000000000..6ff9ddb07 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj @@ -0,0 +1,657 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {8FD826F8-3739-44E6-8CC8-997122E53B8D} + + + + DynamicLibrary + false + true + + + DynamicLibrary + false + true + + + DynamicLibrary + false + + + DynamicLibrary + false + true + + + DynamicLibrary + false + true + + + DynamicLibrary + false + + + DynamicLibrary + false + true + + + DynamicLibrary + false + true + + + DynamicLibrary + false + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + true + false + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + false + false + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + false + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + true + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + true + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + false + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + false + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + false + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + zlibwapid + zlibwapi + zlibwapi + zlibwapid + zlibwapi + zlibwapi + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions) + + + MultiThreadedDebug + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + EditAndContinue + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + true + .\zlibvc.def + true + true + Windows + false + + + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + true + false + .\zlibvc.def + true + Windows + false + + + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + true + false + .\zlibvc.def + true + Windows + false + + + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + true + .\zlibvc.def + true + true + Windows + MachineX64 + + + cd ..\..\masmx64 +bld_ml64.bat + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + .\zlibvc.def + true + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + true + false + .\zlibvc.def + true + Windows + MachineX64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + true + false + .\zlibvc.def + true + Windows + MachineX64 + + + cd ..\..\masmx64 +bld_ml64.bat + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj.filters b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj.filters new file mode 100644 index 000000000..180b71cd6 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj.filters @@ -0,0 +1,118 @@ + + + + + {07934a85-8b61-443d-a0ee-b2eedb74f3cd} + cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90 + + + {1d99675b-433d-4a21-9e50-ed4ab8b19762} + h;hpp;hxx;hm;inl;fi;fd + + + {431c0958-fa71-44d0-9084-2d19d100c0cc} + ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + + + Source Files + + + + + Source Files + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/miniunz.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/miniunz.vcxproj new file mode 100644 index 000000000..8f9f20bd3 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/miniunz.vcxproj @@ -0,0 +1,314 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {C52F9E7B-498A-42BE-8DB4-85A15694382A} + Win32Proj + + + + Application + MultiByte + v110 + + + Application + Unicode + v110 + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + v110 + + + Application + MultiByte + v110 + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\MiniUnzip$(Configuration)\ + x86\MiniUnzip$(Configuration)\Tmp\ + true + false + x86\MiniUnzip$(Configuration)\ + x86\MiniUnzip$(Configuration)\Tmp\ + false + false + x64\MiniUnzip$(Configuration)\ + x64\MiniUnzip$(Configuration)\Tmp\ + true + false + ia64\MiniUnzip$(Configuration)\ + ia64\MiniUnzip$(Configuration)\Tmp\ + true + false + x64\MiniUnzip$(Configuration)\ + x64\MiniUnzip$(Configuration)\Tmp\ + false + false + ia64\MiniUnzip$(Configuration)\ + ia64\MiniUnzip$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/minizip.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/minizip.vcxproj new file mode 100644 index 000000000..c93d9e6ff --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/minizip.vcxproj @@ -0,0 +1,311 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B} + Win32Proj + + + + Application + MultiByte + v110 + + + Application + Unicode + v110 + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + v110 + + + Application + MultiByte + v110 + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\MiniZip$(Configuration)\ + x86\MiniZip$(Configuration)\Tmp\ + true + false + x86\MiniZip$(Configuration)\ + x86\MiniZip$(Configuration)\Tmp\ + false + x64\$(Configuration)\ + x64\$(Configuration)\ + true + false + ia64\$(Configuration)\ + ia64\$(Configuration)\ + true + false + x64\$(Configuration)\ + x64\$(Configuration)\ + false + ia64\$(Configuration)\ + ia64\$(Configuration)\ + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/testzlib.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/testzlib.vcxproj new file mode 100644 index 000000000..6d5595401 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/testzlib.vcxproj @@ -0,0 +1,426 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B} + testzlib + Win32Proj + + + + Application + MultiByte + true + v110 + + + Application + MultiByte + true + v110 + + + Application + Unicode + v110 + + + Application + MultiByte + true + + + Application + MultiByte + true + + + Application + MultiByte + + + Application + true + v110 + + + Application + true + v110 + + + Application + v110 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + true + false + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + false + false + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + false + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + true + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + false + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + AssemblyAndSourceCode + $(IntDir) + Level3 + ProgramDatabase + + + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)testzlib.exe + true + $(OutDir)testzlib.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)testzlib.exe + true + Console + true + true + false + + + MachineX86 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDebugDLL + false + $(IntDir) + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + + + + + Itanium + + + Disabled + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + AssemblyAndSourceCode + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + $(OutDir)testzlib.pdb + Console + MachineIA64 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDLL + false + $(IntDir) + + + %(AdditionalDependencies) + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + MachineIA64 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDLL + false + $(IntDir) + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + MachineIA64 + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/testzlibdll.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/testzlibdll.vcxproj new file mode 100644 index 000000000..9f20c78f6 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/testzlibdll.vcxproj @@ -0,0 +1,314 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {C52F9E7B-498A-42BE-8DB4-85A15694366A} + Win32Proj + + + + Application + MultiByte + v110 + + + Application + Unicode + v110 + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + v110 + + + Application + MultiByte + v110 + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\TestZlibDll$(Configuration)\ + x86\TestZlibDll$(Configuration)\Tmp\ + true + false + x86\TestZlibDll$(Configuration)\ + x86\TestZlibDll$(Configuration)\Tmp\ + false + false + x64\TestZlibDll$(Configuration)\ + x64\TestZlibDll$(Configuration)\Tmp\ + true + false + ia64\TestZlibDll$(Configuration)\ + ia64\TestZlibDll$(Configuration)\Tmp\ + true + false + x64\TestZlibDll$(Configuration)\ + x64\TestZlibDll$(Configuration)\Tmp\ + false + false + ia64\TestZlibDll$(Configuration)\ + ia64\TestZlibDll$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlib.rc b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlib.rc new file mode 100644 index 000000000..73f6476d6 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlib.rc @@ -0,0 +1,32 @@ +#include + +#define IDR_VERSION1 1 +IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE + FILEVERSION 1,2,8,0 + PRODUCTVERSION 1,2,8,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK + FILEFLAGS 0 + FILEOS VOS_DOS_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + + BEGIN + VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0" + VALUE "FileVersion", "1.2.8\0" + VALUE "InternalName", "zlib\0" + VALUE "OriginalFilename", "zlibwapi.dll\0" + VALUE "ProductName", "ZLib.DLL\0" + VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0" + VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibstat.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibstat.vcxproj new file mode 100644 index 000000000..806b76a88 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibstat.vcxproj @@ -0,0 +1,464 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8} + + + + StaticLibrary + false + v110 + + + StaticLibrary + false + v110 + + + StaticLibrary + false + v110 + Unicode + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + v110 + + + StaticLibrary + false + v110 + + + StaticLibrary + false + v110 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)zlibstat.lib + true + + + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + Itanium + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + $(OutDir)zlibstat.lib + true + + + + + Itanium + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + Itanium + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.def b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.def new file mode 100644 index 000000000..636704672 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.def @@ -0,0 +1,143 @@ +LIBRARY +; zlib data compression and ZIP file I/O library + +VERSION 1.2.8 + +EXPORTS + adler32 @1 + compress @2 + crc32 @3 + deflate @4 + deflateCopy @5 + deflateEnd @6 + deflateInit2_ @7 + deflateInit_ @8 + deflateParams @9 + deflateReset @10 + deflateSetDictionary @11 + gzclose @12 + gzdopen @13 + gzerror @14 + gzflush @15 + gzopen @16 + gzread @17 + gzwrite @18 + inflate @19 + inflateEnd @20 + inflateInit2_ @21 + inflateInit_ @22 + inflateReset @23 + inflateSetDictionary @24 + inflateSync @25 + uncompress @26 + zlibVersion @27 + gzprintf @28 + gzputc @29 + gzgetc @30 + gzseek @31 + gzrewind @32 + gztell @33 + gzeof @34 + gzsetparams @35 + zError @36 + inflateSyncPoint @37 + get_crc_table @38 + compress2 @39 + gzputs @40 + gzgets @41 + inflateCopy @42 + inflateBackInit_ @43 + inflateBack @44 + inflateBackEnd @45 + compressBound @46 + deflateBound @47 + gzclearerr @48 + gzungetc @49 + zlibCompileFlags @50 + deflatePrime @51 + deflatePending @52 + + unzOpen @61 + unzClose @62 + unzGetGlobalInfo @63 + unzGetCurrentFileInfo @64 + unzGoToFirstFile @65 + unzGoToNextFile @66 + unzOpenCurrentFile @67 + unzReadCurrentFile @68 + unzOpenCurrentFile3 @69 + unztell @70 + unzeof @71 + unzCloseCurrentFile @72 + unzGetGlobalComment @73 + unzStringFileNameCompare @74 + unzLocateFile @75 + unzGetLocalExtrafield @76 + unzOpen2 @77 + unzOpenCurrentFile2 @78 + unzOpenCurrentFilePassword @79 + + zipOpen @80 + zipOpenNewFileInZip @81 + zipWriteInFileInZip @82 + zipCloseFileInZip @83 + zipClose @84 + zipOpenNewFileInZip2 @86 + zipCloseFileInZipRaw @87 + zipOpen2 @88 + zipOpenNewFileInZip3 @89 + + unzGetFilePos @100 + unzGoToFilePos @101 + + fill_win32_filefunc @110 + +; zlibwapi v1.2.4 added: + fill_win32_filefunc64 @111 + fill_win32_filefunc64A @112 + fill_win32_filefunc64W @113 + + unzOpen64 @120 + unzOpen2_64 @121 + unzGetGlobalInfo64 @122 + unzGetCurrentFileInfo64 @124 + unzGetCurrentFileZStreamPos64 @125 + unztell64 @126 + unzGetFilePos64 @127 + unzGoToFilePos64 @128 + + zipOpen64 @130 + zipOpen2_64 @131 + zipOpenNewFileInZip64 @132 + zipOpenNewFileInZip2_64 @133 + zipOpenNewFileInZip3_64 @134 + zipOpenNewFileInZip4_64 @135 + zipCloseFileInZipRaw64 @136 + +; zlib1 v1.2.4 added: + adler32_combine @140 + crc32_combine @142 + deflateSetHeader @144 + deflateTune @145 + gzbuffer @146 + gzclose_r @147 + gzclose_w @148 + gzdirect @149 + gzoffset @150 + inflateGetHeader @156 + inflateMark @157 + inflatePrime @158 + inflateReset2 @159 + inflateUndermine @160 + +; zlib1 v1.2.6 added: + gzgetc_ @161 + inflateResetKeep @163 + deflateResetKeep @164 + +; zlib1 v1.2.7 added: + gzopen_w @165 + +; zlib1 v1.2.8 added: + inflateGetDictionary @166 + gzvprintf @167 diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.sln b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.sln new file mode 100644 index 000000000..9fcbafdd0 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.sln @@ -0,0 +1,117 @@ + +Microsoft Visual Studio Solution File, Format Version 12.00 +# Visual Studio 2012 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcxproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcxproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcxproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlibdll", "testzlibdll.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcxproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Itanium = Debug|Itanium + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Itanium = Release|Itanium + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium + ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32 + ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.vcxproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.vcxproj new file mode 100644 index 000000000..c65b95fdb --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.vcxproj @@ -0,0 +1,688 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {8FD826F8-3739-44E6-8CC8-997122E53B8D} + + + + DynamicLibrary + false + true + v110 + + + DynamicLibrary + false + true + v110 + + + DynamicLibrary + false + v110 + Unicode + + + DynamicLibrary + false + true + + + DynamicLibrary + false + true + + + DynamicLibrary + false + + + DynamicLibrary + false + true + v110 + + + DynamicLibrary + false + true + v110 + + + DynamicLibrary + false + v110 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + true + false + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + false + false + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + false + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + true + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + true + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + false + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + false + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + false + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + zlibwapi + zlibwapi + zlibwapi + zlibwapi + zlibwapi + zlibwapi + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)zlibwapi.dll + true + .\zlibvc.def + true + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + false + + + $(OutDir)zlibwapi.lib + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + false + + + $(OutDir)zlibwapi.lib + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + false + + + $(OutDir)zlibwapi.lib + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + $(OutDir)zlibwapi.dll + true + .\zlibvc.def + true + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineX64 + + + cd ..\..\contrib\masmx64 +bld_ml64.bat + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + .\zlibvc.def + true + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineX64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineX64 + + + cd ..\..\masmx64 +bld_ml64.bat + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/miniunz.vcproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/miniunz.vcproj new file mode 100644 index 000000000..7da32b91e --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/miniunz.vcproj @@ -0,0 +1,565 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/minizip.vcproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/minizip.vcproj new file mode 100644 index 000000000..e57e07d90 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/minizip.vcproj @@ -0,0 +1,562 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/testzlib.vcproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/testzlib.vcproj new file mode 100644 index 000000000..9cb0bf877 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/testzlib.vcproj @@ -0,0 +1,852 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/testzlibdll.vcproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/testzlibdll.vcproj new file mode 100644 index 000000000..b1ddde05f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/testzlibdll.vcproj @@ -0,0 +1,565 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlib.rc b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlib.rc new file mode 100644 index 000000000..73f6476d6 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlib.rc @@ -0,0 +1,32 @@ +#include + +#define IDR_VERSION1 1 +IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE + FILEVERSION 1,2,8,0 + PRODUCTVERSION 1,2,8,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK + FILEFLAGS 0 + FILEOS VOS_DOS_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + + BEGIN + VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0" + VALUE "FileVersion", "1.2.8\0" + VALUE "InternalName", "zlib\0" + VALUE "OriginalFilename", "zlibwapi.dll\0" + VALUE "ProductName", "ZLib.DLL\0" + VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0" + VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibstat.vcproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibstat.vcproj new file mode 100644 index 000000000..61c76c7c5 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibstat.vcproj @@ -0,0 +1,835 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.def b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.def new file mode 100644 index 000000000..636704672 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.def @@ -0,0 +1,143 @@ +LIBRARY +; zlib data compression and ZIP file I/O library + +VERSION 1.2.8 + +EXPORTS + adler32 @1 + compress @2 + crc32 @3 + deflate @4 + deflateCopy @5 + deflateEnd @6 + deflateInit2_ @7 + deflateInit_ @8 + deflateParams @9 + deflateReset @10 + deflateSetDictionary @11 + gzclose @12 + gzdopen @13 + gzerror @14 + gzflush @15 + gzopen @16 + gzread @17 + gzwrite @18 + inflate @19 + inflateEnd @20 + inflateInit2_ @21 + inflateInit_ @22 + inflateReset @23 + inflateSetDictionary @24 + inflateSync @25 + uncompress @26 + zlibVersion @27 + gzprintf @28 + gzputc @29 + gzgetc @30 + gzseek @31 + gzrewind @32 + gztell @33 + gzeof @34 + gzsetparams @35 + zError @36 + inflateSyncPoint @37 + get_crc_table @38 + compress2 @39 + gzputs @40 + gzgets @41 + inflateCopy @42 + inflateBackInit_ @43 + inflateBack @44 + inflateBackEnd @45 + compressBound @46 + deflateBound @47 + gzclearerr @48 + gzungetc @49 + zlibCompileFlags @50 + deflatePrime @51 + deflatePending @52 + + unzOpen @61 + unzClose @62 + unzGetGlobalInfo @63 + unzGetCurrentFileInfo @64 + unzGoToFirstFile @65 + unzGoToNextFile @66 + unzOpenCurrentFile @67 + unzReadCurrentFile @68 + unzOpenCurrentFile3 @69 + unztell @70 + unzeof @71 + unzCloseCurrentFile @72 + unzGetGlobalComment @73 + unzStringFileNameCompare @74 + unzLocateFile @75 + unzGetLocalExtrafield @76 + unzOpen2 @77 + unzOpenCurrentFile2 @78 + unzOpenCurrentFilePassword @79 + + zipOpen @80 + zipOpenNewFileInZip @81 + zipWriteInFileInZip @82 + zipCloseFileInZip @83 + zipClose @84 + zipOpenNewFileInZip2 @86 + zipCloseFileInZipRaw @87 + zipOpen2 @88 + zipOpenNewFileInZip3 @89 + + unzGetFilePos @100 + unzGoToFilePos @101 + + fill_win32_filefunc @110 + +; zlibwapi v1.2.4 added: + fill_win32_filefunc64 @111 + fill_win32_filefunc64A @112 + fill_win32_filefunc64W @113 + + unzOpen64 @120 + unzOpen2_64 @121 + unzGetGlobalInfo64 @122 + unzGetCurrentFileInfo64 @124 + unzGetCurrentFileZStreamPos64 @125 + unztell64 @126 + unzGetFilePos64 @127 + unzGoToFilePos64 @128 + + zipOpen64 @130 + zipOpen2_64 @131 + zipOpenNewFileInZip64 @132 + zipOpenNewFileInZip2_64 @133 + zipOpenNewFileInZip3_64 @134 + zipOpenNewFileInZip4_64 @135 + zipCloseFileInZipRaw64 @136 + +; zlib1 v1.2.4 added: + adler32_combine @140 + crc32_combine @142 + deflateSetHeader @144 + deflateTune @145 + gzbuffer @146 + gzclose_r @147 + gzclose_w @148 + gzdirect @149 + gzoffset @150 + inflateGetHeader @156 + inflateMark @157 + inflatePrime @158 + inflateReset2 @159 + inflateUndermine @160 + +; zlib1 v1.2.6 added: + gzgetc_ @161 + inflateResetKeep @163 + deflateResetKeep @164 + +; zlib1 v1.2.7 added: + gzopen_w @165 + +; zlib1 v1.2.8 added: + inflateGetDictionary @166 + gzvprintf @167 diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.sln b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.sln new file mode 100644 index 000000000..b4829671f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.sln @@ -0,0 +1,144 @@ + +Microsoft Visual Studio Solution File, Format Version 10.00 +# Visual Studio 2008 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "TestZlibDll", "testzlibdll.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}" + ProjectSection(ProjectDependencies) = postProject + {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}" + ProjectSection(ProjectDependencies) = postProject + {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}" + ProjectSection(ProjectDependencies) = postProject + {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D} + EndProjectSection +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Itanium = Debug|Itanium + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Itanium = Release|Itanium + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium + ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32 + ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.Build.0 = Debug|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.Build.0 = Release|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.Build.0 = Debug|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.Build.0 = Release|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.Build.0 = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.Build.0 = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.vcproj b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.vcproj new file mode 100644 index 000000000..c9a89471e --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.vcproj @@ -0,0 +1,1156 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/external/zlib-1.2.8/crc32.c b/src/SDL2/external/zlib-1.2.8/crc32.c new file mode 100644 index 000000000..979a7190a --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/crc32.c @@ -0,0 +1,425 @@ +/* crc32.c -- compute the CRC-32 of a data stream + * Copyright (C) 1995-2006, 2010, 2011, 2012 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Thanks to Rodney Brown for his contribution of faster + * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing + * tables for updating the shift register in one step with three exclusive-ors + * instead of four steps with four exclusive-ors. This results in about a + * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3. + */ + +/* @(#) $Id$ */ + +/* + Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore + protection on the static variables used to control the first-use generation + of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should + first call get_crc_table() to initialize the tables before allowing more than + one thread to use crc32(). + + DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h. + */ + +#ifdef MAKECRCH +# include +# ifndef DYNAMIC_CRC_TABLE +# define DYNAMIC_CRC_TABLE +# endif /* !DYNAMIC_CRC_TABLE */ +#endif /* MAKECRCH */ + +#include "zutil.h" /* for STDC and FAR definitions */ + +#define local static + +/* Definitions for doing the crc four data bytes at a time. */ +#if !defined(NOBYFOUR) && defined(Z_U4) +# define BYFOUR +#endif +#ifdef BYFOUR + local unsigned long crc32_little OF((unsigned long, + const unsigned char FAR *, unsigned)); + local unsigned long crc32_big OF((unsigned long, + const unsigned char FAR *, unsigned)); +# define TBLS 8 +#else +# define TBLS 1 +#endif /* BYFOUR */ + +/* Local functions for crc concatenation */ +local unsigned long gf2_matrix_times OF((unsigned long *mat, + unsigned long vec)); +local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat)); +local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2)); + + +#ifdef DYNAMIC_CRC_TABLE + +local volatile int crc_table_empty = 1; +local z_crc_t FAR crc_table[TBLS][256]; +local void make_crc_table OF((void)); +#ifdef MAKECRCH + local void write_table OF((FILE *, const z_crc_t FAR *)); +#endif /* MAKECRCH */ +/* + Generate tables for a byte-wise 32-bit CRC calculation on the polynomial: + x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. + + Polynomials over GF(2) are represented in binary, one bit per coefficient, + with the lowest powers in the most significant bit. Then adding polynomials + is just exclusive-or, and multiplying a polynomial by x is a right shift by + one. If we call the above polynomial p, and represent a byte as the + polynomial q, also with the lowest power in the most significant bit (so the + byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, + where a mod b means the remainder after dividing a by b. + + This calculation is done using the shift-register method of multiplying and + taking the remainder. The register is initialized to zero, and for each + incoming bit, x^32 is added mod p to the register if the bit is a one (where + x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by + x (which is shifting right by one and adding x^32 mod p if the bit shifted + out is a one). We start with the highest power (least significant bit) of + q and repeat for all eight bits of q. + + The first table is simply the CRC of all possible eight bit values. This is + all the information needed to generate CRCs on data a byte at a time for all + combinations of CRC register values and incoming bytes. The remaining tables + allow for word-at-a-time CRC calculation for both big-endian and little- + endian machines, where a word is four bytes. +*/ +local void make_crc_table() +{ + z_crc_t c; + int n, k; + z_crc_t poly; /* polynomial exclusive-or pattern */ + /* terms of polynomial defining this crc (except x^32): */ + static volatile int first = 1; /* flag to limit concurrent making */ + static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; + + /* See if another task is already doing this (not thread-safe, but better + than nothing -- significantly reduces duration of vulnerability in + case the advice about DYNAMIC_CRC_TABLE is ignored) */ + if (first) { + first = 0; + + /* make exclusive-or pattern from polynomial (0xedb88320UL) */ + poly = 0; + for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++) + poly |= (z_crc_t)1 << (31 - p[n]); + + /* generate a crc for every 8-bit value */ + for (n = 0; n < 256; n++) { + c = (z_crc_t)n; + for (k = 0; k < 8; k++) + c = c & 1 ? poly ^ (c >> 1) : c >> 1; + crc_table[0][n] = c; + } + +#ifdef BYFOUR + /* generate crc for each value followed by one, two, and three zeros, + and then the byte reversal of those as well as the first table */ + for (n = 0; n < 256; n++) { + c = crc_table[0][n]; + crc_table[4][n] = ZSWAP32(c); + for (k = 1; k < 4; k++) { + c = crc_table[0][c & 0xff] ^ (c >> 8); + crc_table[k][n] = c; + crc_table[k + 4][n] = ZSWAP32(c); + } + } +#endif /* BYFOUR */ + + crc_table_empty = 0; + } + else { /* not first */ + /* wait for the other guy to finish (not efficient, but rare) */ + while (crc_table_empty) + ; + } + +#ifdef MAKECRCH + /* write out CRC tables to crc32.h */ + { + FILE *out; + + out = fopen("crc32.h", "w"); + if (out == NULL) return; + fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n"); + fprintf(out, " * Generated automatically by crc32.c\n */\n\n"); + fprintf(out, "local const z_crc_t FAR "); + fprintf(out, "crc_table[TBLS][256] =\n{\n {\n"); + write_table(out, crc_table[0]); +# ifdef BYFOUR + fprintf(out, "#ifdef BYFOUR\n"); + for (k = 1; k < 8; k++) { + fprintf(out, " },\n {\n"); + write_table(out, crc_table[k]); + } + fprintf(out, "#endif\n"); +# endif /* BYFOUR */ + fprintf(out, " }\n};\n"); + fclose(out); + } +#endif /* MAKECRCH */ +} + +#ifdef MAKECRCH +local void write_table(out, table) + FILE *out; + const z_crc_t FAR *table; +{ + int n; + + for (n = 0; n < 256; n++) + fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", + (unsigned long)(table[n]), + n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", ")); +} +#endif /* MAKECRCH */ + +#else /* !DYNAMIC_CRC_TABLE */ +/* ======================================================================== + * Tables of CRC-32s of all single-byte values, made by make_crc_table(). + */ +#include "crc32.h" +#endif /* DYNAMIC_CRC_TABLE */ + +/* ========================================================================= + * This function can be used by asm versions of crc32() + */ +const z_crc_t FAR * ZEXPORT get_crc_table() +{ +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) + make_crc_table(); +#endif /* DYNAMIC_CRC_TABLE */ + return (const z_crc_t FAR *)crc_table; +} + +/* ========================================================================= */ +#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8) +#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1 + +/* ========================================================================= */ +unsigned long ZEXPORT crc32(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + uInt len; +{ + if (buf == Z_NULL) return 0UL; + +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) + make_crc_table(); +#endif /* DYNAMIC_CRC_TABLE */ + +#ifdef BYFOUR + if (sizeof(void *) == sizeof(ptrdiff_t)) { + z_crc_t endian; + + endian = 1; + if (*((unsigned char *)(&endian))) + return crc32_little(crc, buf, len); + else + return crc32_big(crc, buf, len); + } +#endif /* BYFOUR */ + crc = crc ^ 0xffffffffUL; + while (len >= 8) { + DO8; + len -= 8; + } + if (len) do { + DO1; + } while (--len); + return crc ^ 0xffffffffUL; +} + +#ifdef BYFOUR + +/* ========================================================================= */ +#define DOLIT4 c ^= *buf4++; \ + c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \ + crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24] +#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4 + +/* ========================================================================= */ +local unsigned long crc32_little(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + unsigned len; +{ + register z_crc_t c; + register const z_crc_t FAR *buf4; + + c = (z_crc_t)crc; + c = ~c; + while (len && ((ptrdiff_t)buf & 3)) { + c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); + len--; + } + + buf4 = (const z_crc_t FAR *)(const void FAR *)buf; + while (len >= 32) { + DOLIT32; + len -= 32; + } + while (len >= 4) { + DOLIT4; + len -= 4; + } + buf = (const unsigned char FAR *)buf4; + + if (len) do { + c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); + } while (--len); + c = ~c; + return (unsigned long)c; +} + +/* ========================================================================= */ +#define DOBIG4 c ^= *++buf4; \ + c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \ + crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24] +#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4 + +/* ========================================================================= */ +local unsigned long crc32_big(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + unsigned len; +{ + register z_crc_t c; + register const z_crc_t FAR *buf4; + + c = ZSWAP32((z_crc_t)crc); + c = ~c; + while (len && ((ptrdiff_t)buf & 3)) { + c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); + len--; + } + + buf4 = (const z_crc_t FAR *)(const void FAR *)buf; + buf4--; + while (len >= 32) { + DOBIG32; + len -= 32; + } + while (len >= 4) { + DOBIG4; + len -= 4; + } + buf4++; + buf = (const unsigned char FAR *)buf4; + + if (len) do { + c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); + } while (--len); + c = ~c; + return (unsigned long)(ZSWAP32(c)); +} + +#endif /* BYFOUR */ + +#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */ + +/* ========================================================================= */ +local unsigned long gf2_matrix_times(mat, vec) + unsigned long *mat; + unsigned long vec; +{ + unsigned long sum; + + sum = 0; + while (vec) { + if (vec & 1) + sum ^= *mat; + vec >>= 1; + mat++; + } + return sum; +} + +/* ========================================================================= */ +local void gf2_matrix_square(square, mat) + unsigned long *square; + unsigned long *mat; +{ + int n; + + for (n = 0; n < GF2_DIM; n++) + square[n] = gf2_matrix_times(mat, mat[n]); +} + +/* ========================================================================= */ +local uLong crc32_combine_(crc1, crc2, len2) + uLong crc1; + uLong crc2; + z_off64_t len2; +{ + int n; + unsigned long row; + unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */ + unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */ + + /* degenerate case (also disallow negative lengths) */ + if (len2 <= 0) + return crc1; + + /* put operator for one zero bit in odd */ + odd[0] = 0xedb88320UL; /* CRC-32 polynomial */ + row = 1; + for (n = 1; n < GF2_DIM; n++) { + odd[n] = row; + row <<= 1; + } + + /* put operator for two zero bits in even */ + gf2_matrix_square(even, odd); + + /* put operator for four zero bits in odd */ + gf2_matrix_square(odd, even); + + /* apply len2 zeros to crc1 (first square will put the operator for one + zero byte, eight zero bits, in even) */ + do { + /* apply zeros operator for this bit of len2 */ + gf2_matrix_square(even, odd); + if (len2 & 1) + crc1 = gf2_matrix_times(even, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + if (len2 == 0) + break; + + /* another iteration of the loop with odd and even swapped */ + gf2_matrix_square(odd, even); + if (len2 & 1) + crc1 = gf2_matrix_times(odd, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + } while (len2 != 0); + + /* return combined crc */ + crc1 ^= crc2; + return crc1; +} + +/* ========================================================================= */ +uLong ZEXPORT crc32_combine(crc1, crc2, len2) + uLong crc1; + uLong crc2; + z_off_t len2; +{ + return crc32_combine_(crc1, crc2, len2); +} + +uLong ZEXPORT crc32_combine64(crc1, crc2, len2) + uLong crc1; + uLong crc2; + z_off64_t len2; +{ + return crc32_combine_(crc1, crc2, len2); +} diff --git a/src/SDL2/external/zlib-1.2.8/crc32.h b/src/SDL2/external/zlib-1.2.8/crc32.h new file mode 100644 index 000000000..9e0c77810 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/crc32.h @@ -0,0 +1,441 @@ +/* crc32.h -- tables for rapid CRC calculation + * Generated automatically by crc32.c + */ + +local const z_crc_t FAR crc_table[TBLS][256] = +{ + { + 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL, + 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL, + 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL, + 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL, + 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL, + 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL, + 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL, + 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL, + 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL, + 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL, + 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL, + 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL, + 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL, + 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL, + 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL, + 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL, + 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL, + 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL, + 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL, + 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL, + 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL, + 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL, + 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL, + 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL, + 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL, + 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL, + 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL, + 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL, + 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL, + 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL, + 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL, + 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL, + 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL, + 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL, + 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL, + 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL, + 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL, + 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL, + 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL, + 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL, + 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL, + 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL, + 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL, + 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL, + 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL, + 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL, + 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL, + 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL, + 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL, + 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL, + 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL, + 0x2d02ef8dUL +#ifdef BYFOUR + }, + { + 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL, + 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL, + 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL, + 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL, + 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL, + 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL, + 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL, + 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL, + 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL, + 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL, + 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL, + 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL, + 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL, + 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL, + 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL, + 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL, + 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL, + 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL, + 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL, + 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL, + 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL, + 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL, + 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL, + 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL, + 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL, + 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL, + 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL, + 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL, + 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL, + 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL, + 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL, + 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL, + 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL, + 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL, + 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL, + 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL, + 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL, + 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL, + 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL, + 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL, + 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL, + 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL, + 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL, + 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL, + 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL, + 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL, + 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL, + 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL, + 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL, + 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL, + 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL, + 0x9324fd72UL + }, + { + 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL, + 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL, + 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL, + 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL, + 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL, + 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL, + 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL, + 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL, + 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL, + 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL, + 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL, + 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL, + 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL, + 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL, + 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL, + 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL, + 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL, + 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL, + 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL, + 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL, + 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL, + 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL, + 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL, + 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL, + 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL, + 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL, + 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL, + 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL, + 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL, + 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL, + 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL, + 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL, + 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL, + 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL, + 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL, + 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL, + 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL, + 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL, + 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL, + 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL, + 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL, + 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL, + 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL, + 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL, + 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL, + 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL, + 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL, + 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL, + 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL, + 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL, + 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL, + 0xbe9834edUL + }, + { + 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL, + 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL, + 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL, + 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL, + 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL, + 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL, + 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL, + 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL, + 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL, + 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL, + 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL, + 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL, + 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL, + 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL, + 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL, + 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL, + 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL, + 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL, + 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL, + 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL, + 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL, + 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL, + 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL, + 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL, + 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL, + 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL, + 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL, + 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL, + 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL, + 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL, + 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL, + 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL, + 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL, + 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL, + 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL, + 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL, + 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL, + 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL, + 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL, + 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL, + 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL, + 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL, + 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL, + 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL, + 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL, + 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL, + 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL, + 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL, + 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL, + 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL, + 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL, + 0xde0506f1UL + }, + { + 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL, + 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL, + 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL, + 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL, + 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL, + 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL, + 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL, + 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL, + 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL, + 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL, + 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL, + 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL, + 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL, + 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL, + 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL, + 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL, + 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL, + 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL, + 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL, + 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL, + 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL, + 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL, + 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL, + 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL, + 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL, + 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL, + 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL, + 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL, + 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL, + 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL, + 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL, + 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL, + 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL, + 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL, + 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL, + 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL, + 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL, + 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL, + 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL, + 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL, + 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL, + 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL, + 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL, + 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL, + 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL, + 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL, + 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL, + 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL, + 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL, + 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL, + 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL, + 0x8def022dUL + }, + { + 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL, + 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL, + 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL, + 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL, + 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL, + 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL, + 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL, + 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL, + 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL, + 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL, + 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL, + 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL, + 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL, + 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL, + 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL, + 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL, + 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL, + 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL, + 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL, + 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL, + 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL, + 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL, + 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL, + 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL, + 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL, + 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL, + 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL, + 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL, + 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL, + 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL, + 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL, + 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL, + 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL, + 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL, + 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL, + 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL, + 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL, + 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL, + 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL, + 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL, + 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL, + 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL, + 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL, + 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL, + 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL, + 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL, + 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL, + 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL, + 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL, + 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL, + 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL, + 0x72fd2493UL + }, + { + 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL, + 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL, + 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL, + 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL, + 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL, + 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL, + 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL, + 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL, + 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL, + 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL, + 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL, + 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL, + 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL, + 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL, + 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL, + 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL, + 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL, + 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL, + 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL, + 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL, + 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL, + 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL, + 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL, + 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL, + 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL, + 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL, + 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL, + 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL, + 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL, + 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL, + 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL, + 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL, + 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL, + 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL, + 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL, + 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL, + 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL, + 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL, + 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL, + 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL, + 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL, + 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL, + 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL, + 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL, + 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL, + 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL, + 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL, + 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL, + 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL, + 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL, + 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL, + 0xed3498beUL + }, + { + 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL, + 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL, + 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL, + 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL, + 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL, + 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL, + 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL, + 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL, + 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL, + 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL, + 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL, + 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL, + 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL, + 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL, + 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL, + 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL, + 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL, + 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL, + 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL, + 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL, + 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL, + 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL, + 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL, + 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL, + 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL, + 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL, + 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL, + 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL, + 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL, + 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL, + 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL, + 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL, + 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL, + 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL, + 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL, + 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL, + 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL, + 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL, + 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL, + 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL, + 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL, + 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL, + 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL, + 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL, + 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL, + 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL, + 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL, + 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL, + 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL, + 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL, + 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL, + 0xf10605deUL +#endif + } +}; diff --git a/src/SDL2/external/zlib-1.2.8/deflate.c b/src/SDL2/external/zlib-1.2.8/deflate.c new file mode 100644 index 000000000..696957705 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/deflate.c @@ -0,0 +1,1967 @@ +/* deflate.c -- compress data using the deflation algorithm + * Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * ALGORITHM + * + * The "deflation" process depends on being able to identify portions + * of the input text which are identical to earlier input (within a + * sliding window trailing behind the input currently being processed). + * + * The most straightforward technique turns out to be the fastest for + * most input files: try all possible matches and select the longest. + * The key feature of this algorithm is that insertions into the string + * dictionary are very simple and thus fast, and deletions are avoided + * completely. Insertions are performed at each input character, whereas + * string matches are performed only when the previous match ends. So it + * is preferable to spend more time in matches to allow very fast string + * insertions and avoid deletions. The matching algorithm for small + * strings is inspired from that of Rabin & Karp. A brute force approach + * is used to find longer strings when a small match has been found. + * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze + * (by Leonid Broukhis). + * A previous version of this file used a more sophisticated algorithm + * (by Fiala and Greene) which is guaranteed to run in linear amortized + * time, but has a larger average cost, uses more memory and is patented. + * However the F&G algorithm may be faster for some highly redundant + * files if the parameter max_chain_length (described below) is too large. + * + * ACKNOWLEDGEMENTS + * + * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and + * I found it in 'freeze' written by Leonid Broukhis. + * Thanks to many people for bug reports and testing. + * + * REFERENCES + * + * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". + * Available in http://tools.ietf.org/html/rfc1951 + * + * A description of the Rabin and Karp algorithm is given in the book + * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. + * + * Fiala,E.R., and Greene,D.H. + * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 + * + */ + +/* @(#) $Id$ */ + +#include "deflate.h" + +const char deflate_copyright[] = + " deflate 1.2.8 Copyright 1995-2013 Jean-loup Gailly and Mark Adler "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* =========================================================================== + * Function prototypes. + */ +typedef enum { + need_more, /* block not completed, need more input or more output */ + block_done, /* block flush performed */ + finish_started, /* finish started, need only more output at next deflate */ + finish_done /* finish done, accept no more input or output */ +} block_state; + +typedef block_state (*compress_func) OF((deflate_state *s, int flush)); +/* Compression function. Returns the block state after the call. */ + +local void fill_window OF((deflate_state *s)); +local block_state deflate_stored OF((deflate_state *s, int flush)); +local block_state deflate_fast OF((deflate_state *s, int flush)); +#ifndef FASTEST +local block_state deflate_slow OF((deflate_state *s, int flush)); +#endif +local block_state deflate_rle OF((deflate_state *s, int flush)); +local block_state deflate_huff OF((deflate_state *s, int flush)); +local void lm_init OF((deflate_state *s)); +local void putShortMSB OF((deflate_state *s, uInt b)); +local void flush_pending OF((z_streamp strm)); +local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); +#ifdef ASMV + void match_init OF((void)); /* asm code initialization */ + uInt longest_match OF((deflate_state *s, IPos cur_match)); +#else +local uInt longest_match OF((deflate_state *s, IPos cur_match)); +#endif + +#ifdef DEBUG +local void check_match OF((deflate_state *s, IPos start, IPos match, + int length)); +#endif + +/* =========================================================================== + * Local data + */ + +#define NIL 0 +/* Tail of hash chains */ + +#ifndef TOO_FAR +# define TOO_FAR 4096 +#endif +/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ + +/* Values for max_lazy_match, good_match and max_chain_length, depending on + * the desired pack level (0..9). The values given below have been tuned to + * exclude worst case performance for pathological files. Better values may be + * found for specific files. + */ +typedef struct config_s { + ush good_length; /* reduce lazy search above this match length */ + ush max_lazy; /* do not perform lazy search above this match length */ + ush nice_length; /* quit search above this match length */ + ush max_chain; + compress_func func; +} config; + +#ifdef FASTEST +local const config configuration_table[2] = { +/* good lazy nice chain */ +/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ +/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */ +#else +local const config configuration_table[10] = { +/* good lazy nice chain */ +/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ +/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */ +/* 2 */ {4, 5, 16, 8, deflate_fast}, +/* 3 */ {4, 6, 32, 32, deflate_fast}, + +/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ +/* 5 */ {8, 16, 32, 32, deflate_slow}, +/* 6 */ {8, 16, 128, 128, deflate_slow}, +/* 7 */ {8, 32, 128, 256, deflate_slow}, +/* 8 */ {32, 128, 258, 1024, deflate_slow}, +/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */ +#endif + +/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 + * For deflate_fast() (levels <= 3) good is ignored and lazy has a different + * meaning. + */ + +#define EQUAL 0 +/* result of memcmp for equal strings */ + +#ifndef NO_DUMMY_DECL +struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ +#endif + +/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */ +#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0)) + +/* =========================================================================== + * Update a hash value with the given input byte + * IN assertion: all calls to to UPDATE_HASH are made with consecutive + * input characters, so that a running hash key can be computed from the + * previous key instead of complete recalculation each time. + */ +#define UPDATE_HASH(s,h,c) (h = (((h)<hash_shift) ^ (c)) & s->hash_mask) + + +/* =========================================================================== + * Insert string str in the dictionary and set match_head to the previous head + * of the hash chain (the most recent string with same hash key). Return + * the previous length of the hash chain. + * If this file is compiled with -DFASTEST, the compression level is forced + * to 1, and no hash chains are maintained. + * IN assertion: all calls to to INSERT_STRING are made with consecutive + * input characters and the first MIN_MATCH bytes of str are valid + * (except for the last MIN_MATCH-1 bytes of the input file). + */ +#ifdef FASTEST +#define INSERT_STRING(s, str, match_head) \ + (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ + match_head = s->head[s->ins_h], \ + s->head[s->ins_h] = (Pos)(str)) +#else +#define INSERT_STRING(s, str, match_head) \ + (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ + match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \ + s->head[s->ins_h] = (Pos)(str)) +#endif + +/* =========================================================================== + * Initialize the hash table (avoiding 64K overflow for 16 bit systems). + * prev[] will be initialized on the fly. + */ +#define CLEAR_HASH(s) \ + s->head[s->hash_size-1] = NIL; \ + zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); + +/* ========================================================================= */ +int ZEXPORT deflateInit_(strm, level, version, stream_size) + z_streamp strm; + int level; + const char *version; + int stream_size; +{ + return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, + Z_DEFAULT_STRATEGY, version, stream_size); + /* To do: ignore strm->next_in if we use it as window */ +} + +/* ========================================================================= */ +int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, + version, stream_size) + z_streamp strm; + int level; + int method; + int windowBits; + int memLevel; + int strategy; + const char *version; + int stream_size; +{ + deflate_state *s; + int wrap = 1; + static const char my_version[] = ZLIB_VERSION; + + ushf *overlay; + /* We overlay pending_buf and d_buf+l_buf. This works since the average + * output size for (length,distance) codes is <= 24 bits. + */ + + if (version == Z_NULL || version[0] != my_version[0] || + stream_size != sizeof(z_stream)) { + return Z_VERSION_ERROR; + } + if (strm == Z_NULL) return Z_STREAM_ERROR; + + strm->msg = Z_NULL; + if (strm->zalloc == (alloc_func)0) { +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; +#endif + } + if (strm->zfree == (free_func)0) +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zfree = zcfree; +#endif + +#ifdef FASTEST + if (level != 0) level = 1; +#else + if (level == Z_DEFAULT_COMPRESSION) level = 6; +#endif + + if (windowBits < 0) { /* suppress zlib wrapper */ + wrap = 0; + windowBits = -windowBits; + } +#ifdef GZIP + else if (windowBits > 15) { + wrap = 2; /* write gzip wrapper instead */ + windowBits -= 16; + } +#endif + if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || + windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || + strategy < 0 || strategy > Z_FIXED) { + return Z_STREAM_ERROR; + } + if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */ + s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); + if (s == Z_NULL) return Z_MEM_ERROR; + strm->state = (struct internal_state FAR *)s; + s->strm = strm; + + s->wrap = wrap; + s->gzhead = Z_NULL; + s->w_bits = windowBits; + s->w_size = 1 << s->w_bits; + s->w_mask = s->w_size - 1; + + s->hash_bits = memLevel + 7; + s->hash_size = 1 << s->hash_bits; + s->hash_mask = s->hash_size - 1; + s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); + + s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); + s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); + s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); + + s->high_water = 0; /* nothing written to s->window yet */ + + s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ + + overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); + s->pending_buf = (uchf *) overlay; + s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); + + if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || + s->pending_buf == Z_NULL) { + s->status = FINISH_STATE; + strm->msg = ERR_MSG(Z_MEM_ERROR); + deflateEnd (strm); + return Z_MEM_ERROR; + } + s->d_buf = overlay + s->lit_bufsize/sizeof(ush); + s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; + + s->level = level; + s->strategy = strategy; + s->method = (Byte)method; + + return deflateReset(strm); +} + +/* ========================================================================= */ +int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) + z_streamp strm; + const Bytef *dictionary; + uInt dictLength; +{ + deflate_state *s; + uInt str, n; + int wrap; + unsigned avail; + z_const unsigned char *next; + + if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL) + return Z_STREAM_ERROR; + s = strm->state; + wrap = s->wrap; + if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead) + return Z_STREAM_ERROR; + + /* when using zlib wrappers, compute Adler-32 for provided dictionary */ + if (wrap == 1) + strm->adler = adler32(strm->adler, dictionary, dictLength); + s->wrap = 0; /* avoid computing Adler-32 in read_buf */ + + /* if dictionary would fill window, just replace the history */ + if (dictLength >= s->w_size) { + if (wrap == 0) { /* already empty otherwise */ + CLEAR_HASH(s); + s->strstart = 0; + s->block_start = 0L; + s->insert = 0; + } + dictionary += dictLength - s->w_size; /* use the tail */ + dictLength = s->w_size; + } + + /* insert dictionary into window and hash */ + avail = strm->avail_in; + next = strm->next_in; + strm->avail_in = dictLength; + strm->next_in = (z_const Bytef *)dictionary; + fill_window(s); + while (s->lookahead >= MIN_MATCH) { + str = s->strstart; + n = s->lookahead - (MIN_MATCH-1); + do { + UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); +#ifndef FASTEST + s->prev[str & s->w_mask] = s->head[s->ins_h]; +#endif + s->head[s->ins_h] = (Pos)str; + str++; + } while (--n); + s->strstart = str; + s->lookahead = MIN_MATCH-1; + fill_window(s); + } + s->strstart += s->lookahead; + s->block_start = (long)s->strstart; + s->insert = s->lookahead; + s->lookahead = 0; + s->match_length = s->prev_length = MIN_MATCH-1; + s->match_available = 0; + strm->next_in = next; + strm->avail_in = avail; + s->wrap = wrap; + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflateResetKeep (strm) + z_streamp strm; +{ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL || + strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) { + return Z_STREAM_ERROR; + } + + strm->total_in = strm->total_out = 0; + strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ + strm->data_type = Z_UNKNOWN; + + s = (deflate_state *)strm->state; + s->pending = 0; + s->pending_out = s->pending_buf; + + if (s->wrap < 0) { + s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */ + } + s->status = s->wrap ? INIT_STATE : BUSY_STATE; + strm->adler = +#ifdef GZIP + s->wrap == 2 ? crc32(0L, Z_NULL, 0) : +#endif + adler32(0L, Z_NULL, 0); + s->last_flush = Z_NO_FLUSH; + + _tr_init(s); + + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflateReset (strm) + z_streamp strm; +{ + int ret; + + ret = deflateResetKeep(strm); + if (ret == Z_OK) + lm_init(strm->state); + return ret; +} + +/* ========================================================================= */ +int ZEXPORT deflateSetHeader (strm, head) + z_streamp strm; + gz_headerp head; +{ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + if (strm->state->wrap != 2) return Z_STREAM_ERROR; + strm->state->gzhead = head; + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflatePending (strm, pending, bits) + unsigned *pending; + int *bits; + z_streamp strm; +{ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + if (pending != Z_NULL) + *pending = strm->state->pending; + if (bits != Z_NULL) + *bits = strm->state->bi_valid; + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflatePrime (strm, bits, value) + z_streamp strm; + int bits; + int value; +{ + deflate_state *s; + int put; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + s = strm->state; + if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3)) + return Z_BUF_ERROR; + do { + put = Buf_size - s->bi_valid; + if (put > bits) + put = bits; + s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid); + s->bi_valid += put; + _tr_flush_bits(s); + value >>= put; + bits -= put; + } while (bits); + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflateParams(strm, level, strategy) + z_streamp strm; + int level; + int strategy; +{ + deflate_state *s; + compress_func func; + int err = Z_OK; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + s = strm->state; + +#ifdef FASTEST + if (level != 0) level = 1; +#else + if (level == Z_DEFAULT_COMPRESSION) level = 6; +#endif + if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) { + return Z_STREAM_ERROR; + } + func = configuration_table[s->level].func; + + if ((strategy != s->strategy || func != configuration_table[level].func) && + strm->total_in != 0) { + /* Flush the last buffer: */ + err = deflate(strm, Z_BLOCK); + if (err == Z_BUF_ERROR && s->pending == 0) + err = Z_OK; + } + if (s->level != level) { + s->level = level; + s->max_lazy_match = configuration_table[level].max_lazy; + s->good_match = configuration_table[level].good_length; + s->nice_match = configuration_table[level].nice_length; + s->max_chain_length = configuration_table[level].max_chain; + } + s->strategy = strategy; + return err; +} + +/* ========================================================================= */ +int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain) + z_streamp strm; + int good_length; + int max_lazy; + int nice_length; + int max_chain; +{ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + s = strm->state; + s->good_match = good_length; + s->max_lazy_match = max_lazy; + s->nice_match = nice_length; + s->max_chain_length = max_chain; + return Z_OK; +} + +/* ========================================================================= + * For the default windowBits of 15 and memLevel of 8, this function returns + * a close to exact, as well as small, upper bound on the compressed size. + * They are coded as constants here for a reason--if the #define's are + * changed, then this function needs to be changed as well. The return + * value for 15 and 8 only works for those exact settings. + * + * For any setting other than those defaults for windowBits and memLevel, + * the value returned is a conservative worst case for the maximum expansion + * resulting from using fixed blocks instead of stored blocks, which deflate + * can emit on compressed data for some combinations of the parameters. + * + * This function could be more sophisticated to provide closer upper bounds for + * every combination of windowBits and memLevel. But even the conservative + * upper bound of about 14% expansion does not seem onerous for output buffer + * allocation. + */ +uLong ZEXPORT deflateBound(strm, sourceLen) + z_streamp strm; + uLong sourceLen; +{ + deflate_state *s; + uLong complen, wraplen; + Bytef *str; + + /* conservative upper bound for compressed data */ + complen = sourceLen + + ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5; + + /* if can't get parameters, return conservative bound plus zlib wrapper */ + if (strm == Z_NULL || strm->state == Z_NULL) + return complen + 6; + + /* compute wrapper length */ + s = strm->state; + switch (s->wrap) { + case 0: /* raw deflate */ + wraplen = 0; + break; + case 1: /* zlib wrapper */ + wraplen = 6 + (s->strstart ? 4 : 0); + break; + case 2: /* gzip wrapper */ + wraplen = 18; + if (s->gzhead != Z_NULL) { /* user-supplied gzip header */ + if (s->gzhead->extra != Z_NULL) + wraplen += 2 + s->gzhead->extra_len; + str = s->gzhead->name; + if (str != Z_NULL) + do { + wraplen++; + } while (*str++); + str = s->gzhead->comment; + if (str != Z_NULL) + do { + wraplen++; + } while (*str++); + if (s->gzhead->hcrc) + wraplen += 2; + } + break; + default: /* for compiler happiness */ + wraplen = 6; + } + + /* if not default parameters, return conservative bound */ + if (s->w_bits != 15 || s->hash_bits != 8 + 7) + return complen + wraplen; + + /* default settings: return tight bound for that case */ + return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + + (sourceLen >> 25) + 13 - 6 + wraplen; +} + +/* ========================================================================= + * Put a short in the pending buffer. The 16-bit value is put in MSB order. + * IN assertion: the stream state is correct and there is enough room in + * pending_buf. + */ +local void putShortMSB (s, b) + deflate_state *s; + uInt b; +{ + put_byte(s, (Byte)(b >> 8)); + put_byte(s, (Byte)(b & 0xff)); +} + +/* ========================================================================= + * Flush as much pending output as possible. All deflate() output goes + * through this function so some applications may wish to modify it + * to avoid allocating a large strm->next_out buffer and copying into it. + * (See also read_buf()). + */ +local void flush_pending(strm) + z_streamp strm; +{ + unsigned len; + deflate_state *s = strm->state; + + _tr_flush_bits(s); + len = s->pending; + if (len > strm->avail_out) len = strm->avail_out; + if (len == 0) return; + + zmemcpy(strm->next_out, s->pending_out, len); + strm->next_out += len; + s->pending_out += len; + strm->total_out += len; + strm->avail_out -= len; + s->pending -= len; + if (s->pending == 0) { + s->pending_out = s->pending_buf; + } +} + +/* ========================================================================= */ +int ZEXPORT deflate (strm, flush) + z_streamp strm; + int flush; +{ + int old_flush; /* value of flush param for previous deflate call */ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL || + flush > Z_BLOCK || flush < 0) { + return Z_STREAM_ERROR; + } + s = strm->state; + + if (strm->next_out == Z_NULL || + (strm->next_in == Z_NULL && strm->avail_in != 0) || + (s->status == FINISH_STATE && flush != Z_FINISH)) { + ERR_RETURN(strm, Z_STREAM_ERROR); + } + if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); + + s->strm = strm; /* just in case */ + old_flush = s->last_flush; + s->last_flush = flush; + + /* Write the header */ + if (s->status == INIT_STATE) { +#ifdef GZIP + if (s->wrap == 2) { + strm->adler = crc32(0L, Z_NULL, 0); + put_byte(s, 31); + put_byte(s, 139); + put_byte(s, 8); + if (s->gzhead == Z_NULL) { + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, s->level == 9 ? 2 : + (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? + 4 : 0)); + put_byte(s, OS_CODE); + s->status = BUSY_STATE; + } + else { + put_byte(s, (s->gzhead->text ? 1 : 0) + + (s->gzhead->hcrc ? 2 : 0) + + (s->gzhead->extra == Z_NULL ? 0 : 4) + + (s->gzhead->name == Z_NULL ? 0 : 8) + + (s->gzhead->comment == Z_NULL ? 0 : 16) + ); + put_byte(s, (Byte)(s->gzhead->time & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff)); + put_byte(s, s->level == 9 ? 2 : + (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? + 4 : 0)); + put_byte(s, s->gzhead->os & 0xff); + if (s->gzhead->extra != Z_NULL) { + put_byte(s, s->gzhead->extra_len & 0xff); + put_byte(s, (s->gzhead->extra_len >> 8) & 0xff); + } + if (s->gzhead->hcrc) + strm->adler = crc32(strm->adler, s->pending_buf, + s->pending); + s->gzindex = 0; + s->status = EXTRA_STATE; + } + } + else +#endif + { + uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; + uInt level_flags; + + if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2) + level_flags = 0; + else if (s->level < 6) + level_flags = 1; + else if (s->level == 6) + level_flags = 2; + else + level_flags = 3; + header |= (level_flags << 6); + if (s->strstart != 0) header |= PRESET_DICT; + header += 31 - (header % 31); + + s->status = BUSY_STATE; + putShortMSB(s, header); + + /* Save the adler32 of the preset dictionary: */ + if (s->strstart != 0) { + putShortMSB(s, (uInt)(strm->adler >> 16)); + putShortMSB(s, (uInt)(strm->adler & 0xffff)); + } + strm->adler = adler32(0L, Z_NULL, 0); + } + } +#ifdef GZIP + if (s->status == EXTRA_STATE) { + if (s->gzhead->extra != Z_NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + + while (s->gzindex < (s->gzhead->extra_len & 0xffff)) { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) + break; + } + put_byte(s, s->gzhead->extra[s->gzindex]); + s->gzindex++; + } + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (s->gzindex == s->gzhead->extra_len) { + s->gzindex = 0; + s->status = NAME_STATE; + } + } + else + s->status = NAME_STATE; + } + if (s->status == NAME_STATE) { + if (s->gzhead->name != Z_NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + int val; + + do { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) { + val = 1; + break; + } + } + val = s->gzhead->name[s->gzindex++]; + put_byte(s, val); + } while (val != 0); + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (val == 0) { + s->gzindex = 0; + s->status = COMMENT_STATE; + } + } + else + s->status = COMMENT_STATE; + } + if (s->status == COMMENT_STATE) { + if (s->gzhead->comment != Z_NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + int val; + + do { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) { + val = 1; + break; + } + } + val = s->gzhead->comment[s->gzindex++]; + put_byte(s, val); + } while (val != 0); + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (val == 0) + s->status = HCRC_STATE; + } + else + s->status = HCRC_STATE; + } + if (s->status == HCRC_STATE) { + if (s->gzhead->hcrc) { + if (s->pending + 2 > s->pending_buf_size) + flush_pending(strm); + if (s->pending + 2 <= s->pending_buf_size) { + put_byte(s, (Byte)(strm->adler & 0xff)); + put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); + strm->adler = crc32(0L, Z_NULL, 0); + s->status = BUSY_STATE; + } + } + else + s->status = BUSY_STATE; + } +#endif + + /* Flush as much pending output as possible */ + if (s->pending != 0) { + flush_pending(strm); + if (strm->avail_out == 0) { + /* Since avail_out is 0, deflate will be called again with + * more output space, but possibly with both pending and + * avail_in equal to zero. There won't be anything to do, + * but this is not an error situation so make sure we + * return OK instead of BUF_ERROR at next call of deflate: + */ + s->last_flush = -1; + return Z_OK; + } + + /* Make sure there is something to do and avoid duplicate consecutive + * flushes. For repeated and useless calls with Z_FINISH, we keep + * returning Z_STREAM_END instead of Z_BUF_ERROR. + */ + } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) && + flush != Z_FINISH) { + ERR_RETURN(strm, Z_BUF_ERROR); + } + + /* User must not provide more input after the first FINISH: */ + if (s->status == FINISH_STATE && strm->avail_in != 0) { + ERR_RETURN(strm, Z_BUF_ERROR); + } + + /* Start a new block or continue the current one. + */ + if (strm->avail_in != 0 || s->lookahead != 0 || + (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { + block_state bstate; + + bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) : + (s->strategy == Z_RLE ? deflate_rle(s, flush) : + (*(configuration_table[s->level].func))(s, flush)); + + if (bstate == finish_started || bstate == finish_done) { + s->status = FINISH_STATE; + } + if (bstate == need_more || bstate == finish_started) { + if (strm->avail_out == 0) { + s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ + } + return Z_OK; + /* If flush != Z_NO_FLUSH && avail_out == 0, the next call + * of deflate should use the same flush parameter to make sure + * that the flush is complete. So we don't have to output an + * empty block here, this will be done at next call. This also + * ensures that for a very small output buffer, we emit at most + * one empty block. + */ + } + if (bstate == block_done) { + if (flush == Z_PARTIAL_FLUSH) { + _tr_align(s); + } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */ + _tr_stored_block(s, (char*)0, 0L, 0); + /* For a full flush, this empty block will be recognized + * as a special marker by inflate_sync(). + */ + if (flush == Z_FULL_FLUSH) { + CLEAR_HASH(s); /* forget history */ + if (s->lookahead == 0) { + s->strstart = 0; + s->block_start = 0L; + s->insert = 0; + } + } + } + flush_pending(strm); + if (strm->avail_out == 0) { + s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ + return Z_OK; + } + } + } + Assert(strm->avail_out > 0, "bug2"); + + if (flush != Z_FINISH) return Z_OK; + if (s->wrap <= 0) return Z_STREAM_END; + + /* Write the trailer */ +#ifdef GZIP + if (s->wrap == 2) { + put_byte(s, (Byte)(strm->adler & 0xff)); + put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); + put_byte(s, (Byte)((strm->adler >> 16) & 0xff)); + put_byte(s, (Byte)((strm->adler >> 24) & 0xff)); + put_byte(s, (Byte)(strm->total_in & 0xff)); + put_byte(s, (Byte)((strm->total_in >> 8) & 0xff)); + put_byte(s, (Byte)((strm->total_in >> 16) & 0xff)); + put_byte(s, (Byte)((strm->total_in >> 24) & 0xff)); + } + else +#endif + { + putShortMSB(s, (uInt)(strm->adler >> 16)); + putShortMSB(s, (uInt)(strm->adler & 0xffff)); + } + flush_pending(strm); + /* If avail_out is zero, the application will call deflate again + * to flush the rest. + */ + if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */ + return s->pending != 0 ? Z_OK : Z_STREAM_END; +} + +/* ========================================================================= */ +int ZEXPORT deflateEnd (strm) + z_streamp strm; +{ + int status; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + + status = strm->state->status; + if (status != INIT_STATE && + status != EXTRA_STATE && + status != NAME_STATE && + status != COMMENT_STATE && + status != HCRC_STATE && + status != BUSY_STATE && + status != FINISH_STATE) { + return Z_STREAM_ERROR; + } + + /* Deallocate in reverse order of allocations: */ + TRY_FREE(strm, strm->state->pending_buf); + TRY_FREE(strm, strm->state->head); + TRY_FREE(strm, strm->state->prev); + TRY_FREE(strm, strm->state->window); + + ZFREE(strm, strm->state); + strm->state = Z_NULL; + + return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; +} + +/* ========================================================================= + * Copy the source state to the destination state. + * To simplify the source, this is not supported for 16-bit MSDOS (which + * doesn't have enough memory anyway to duplicate compression states). + */ +int ZEXPORT deflateCopy (dest, source) + z_streamp dest; + z_streamp source; +{ +#ifdef MAXSEG_64K + return Z_STREAM_ERROR; +#else + deflate_state *ds; + deflate_state *ss; + ushf *overlay; + + + if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { + return Z_STREAM_ERROR; + } + + ss = source->state; + + zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream)); + + ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); + if (ds == Z_NULL) return Z_MEM_ERROR; + dest->state = (struct internal_state FAR *) ds; + zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state)); + ds->strm = dest; + + ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); + ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); + ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); + overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); + ds->pending_buf = (uchf *) overlay; + + if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || + ds->pending_buf == Z_NULL) { + deflateEnd (dest); + return Z_MEM_ERROR; + } + /* following zmemcpy do not work for 16-bit MSDOS */ + zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); + zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos)); + zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos)); + zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); + + ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); + ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); + ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; + + ds->l_desc.dyn_tree = ds->dyn_ltree; + ds->d_desc.dyn_tree = ds->dyn_dtree; + ds->bl_desc.dyn_tree = ds->bl_tree; + + return Z_OK; +#endif /* MAXSEG_64K */ +} + +/* =========================================================================== + * Read a new buffer from the current input stream, update the adler32 + * and total number of bytes read. All deflate() input goes through + * this function so some applications may wish to modify it to avoid + * allocating a large strm->next_in buffer and copying from it. + * (See also flush_pending()). + */ +local int read_buf(strm, buf, size) + z_streamp strm; + Bytef *buf; + unsigned size; +{ + unsigned len = strm->avail_in; + + if (len > size) len = size; + if (len == 0) return 0; + + strm->avail_in -= len; + + zmemcpy(buf, strm->next_in, len); + if (strm->state->wrap == 1) { + strm->adler = adler32(strm->adler, buf, len); + } +#ifdef GZIP + else if (strm->state->wrap == 2) { + strm->adler = crc32(strm->adler, buf, len); + } +#endif + strm->next_in += len; + strm->total_in += len; + + return (int)len; +} + +/* =========================================================================== + * Initialize the "longest match" routines for a new zlib stream + */ +local void lm_init (s) + deflate_state *s; +{ + s->window_size = (ulg)2L*s->w_size; + + CLEAR_HASH(s); + + /* Set the default configuration parameters: + */ + s->max_lazy_match = configuration_table[s->level].max_lazy; + s->good_match = configuration_table[s->level].good_length; + s->nice_match = configuration_table[s->level].nice_length; + s->max_chain_length = configuration_table[s->level].max_chain; + + s->strstart = 0; + s->block_start = 0L; + s->lookahead = 0; + s->insert = 0; + s->match_length = s->prev_length = MIN_MATCH-1; + s->match_available = 0; + s->ins_h = 0; +#ifndef FASTEST +#ifdef ASMV + match_init(); /* initialize the asm code */ +#endif +#endif +} + +#ifndef FASTEST +/* =========================================================================== + * Set match_start to the longest match starting at the given string and + * return its length. Matches shorter or equal to prev_length are discarded, + * in which case the result is equal to prev_length and match_start is + * garbage. + * IN assertions: cur_match is the head of the hash chain for the current + * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 + * OUT assertion: the match length is not greater than s->lookahead. + */ +#ifndef ASMV +/* For 80x86 and 680x0, an optimized version will be provided in match.asm or + * match.S. The code will be functionally equivalent. + */ +local uInt longest_match(s, cur_match) + deflate_state *s; + IPos cur_match; /* current match */ +{ + unsigned chain_length = s->max_chain_length;/* max hash chain length */ + register Bytef *scan = s->window + s->strstart; /* current string */ + register Bytef *match; /* matched string */ + register int len; /* length of current match */ + int best_len = s->prev_length; /* best match length so far */ + int nice_match = s->nice_match; /* stop if match long enough */ + IPos limit = s->strstart > (IPos)MAX_DIST(s) ? + s->strstart - (IPos)MAX_DIST(s) : NIL; + /* Stop when cur_match becomes <= limit. To simplify the code, + * we prevent matches with the string of window index 0. + */ + Posf *prev = s->prev; + uInt wmask = s->w_mask; + +#ifdef UNALIGNED_OK + /* Compare two bytes at a time. Note: this is not always beneficial. + * Try with and without -DUNALIGNED_OK to check. + */ + register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; + register ush scan_start = *(ushf*)scan; + register ush scan_end = *(ushf*)(scan+best_len-1); +#else + register Bytef *strend = s->window + s->strstart + MAX_MATCH; + register Byte scan_end1 = scan[best_len-1]; + register Byte scan_end = scan[best_len]; +#endif + + /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. + * It is easy to get rid of this optimization if necessary. + */ + Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); + + /* Do not waste too much time if we already have a good match: */ + if (s->prev_length >= s->good_match) { + chain_length >>= 2; + } + /* Do not look for matches beyond the end of the input. This is necessary + * to make deflate deterministic. + */ + if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + + Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); + + do { + Assert(cur_match < s->strstart, "no future"); + match = s->window + cur_match; + + /* Skip to next match if the match length cannot increase + * or if the match length is less than 2. Note that the checks below + * for insufficient lookahead only occur occasionally for performance + * reasons. Therefore uninitialized memory will be accessed, and + * conditional jumps will be made that depend on those values. + * However the length of the match is limited to the lookahead, so + * the output of deflate is not affected by the uninitialized values. + */ +#if (defined(UNALIGNED_OK) && MAX_MATCH == 258) + /* This code assumes sizeof(unsigned short) == 2. Do not use + * UNALIGNED_OK if your compiler uses a different size. + */ + if (*(ushf*)(match+best_len-1) != scan_end || + *(ushf*)match != scan_start) continue; + + /* It is not necessary to compare scan[2] and match[2] since they are + * always equal when the other bytes match, given that the hash keys + * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at + * strstart+3, +5, ... up to strstart+257. We check for insufficient + * lookahead only every 4th comparison; the 128th check will be made + * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is + * necessary to put more guard bytes at the end of the window, or + * to check more often for insufficient lookahead. + */ + Assert(scan[2] == match[2], "scan[2]?"); + scan++, match++; + do { + } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + scan < strend); + /* The funny "do {}" generates better code on most compilers */ + + /* Here, scan <= window+strstart+257 */ + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + if (*scan == *match) scan++; + + len = (MAX_MATCH - 1) - (int)(strend-scan); + scan = strend - (MAX_MATCH-1); + +#else /* UNALIGNED_OK */ + + if (match[best_len] != scan_end || + match[best_len-1] != scan_end1 || + *match != *scan || + *++match != scan[1]) continue; + + /* The check at best_len-1 can be removed because it will be made + * again later. (This heuristic is not always a win.) + * It is not necessary to compare scan[2] and match[2] since they + * are always equal when the other bytes match, given that + * the hash keys are equal and that HASH_BITS >= 8. + */ + scan += 2, match++; + Assert(*scan == *match, "match[2]?"); + + /* We check for insufficient lookahead only every 8th comparison; + * the 256th check will be made at strstart+258. + */ + do { + } while (*++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + scan < strend); + + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + + len = MAX_MATCH - (int)(strend - scan); + scan = strend - MAX_MATCH; + +#endif /* UNALIGNED_OK */ + + if (len > best_len) { + s->match_start = cur_match; + best_len = len; + if (len >= nice_match) break; +#ifdef UNALIGNED_OK + scan_end = *(ushf*)(scan+best_len-1); +#else + scan_end1 = scan[best_len-1]; + scan_end = scan[best_len]; +#endif + } + } while ((cur_match = prev[cur_match & wmask]) > limit + && --chain_length != 0); + + if ((uInt)best_len <= s->lookahead) return (uInt)best_len; + return s->lookahead; +} +#endif /* ASMV */ + +#else /* FASTEST */ + +/* --------------------------------------------------------------------------- + * Optimized version for FASTEST only + */ +local uInt longest_match(s, cur_match) + deflate_state *s; + IPos cur_match; /* current match */ +{ + register Bytef *scan = s->window + s->strstart; /* current string */ + register Bytef *match; /* matched string */ + register int len; /* length of current match */ + register Bytef *strend = s->window + s->strstart + MAX_MATCH; + + /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. + * It is easy to get rid of this optimization if necessary. + */ + Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); + + Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); + + Assert(cur_match < s->strstart, "no future"); + + match = s->window + cur_match; + + /* Return failure if the match length is less than 2: + */ + if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; + + /* The check at best_len-1 can be removed because it will be made + * again later. (This heuristic is not always a win.) + * It is not necessary to compare scan[2] and match[2] since they + * are always equal when the other bytes match, given that + * the hash keys are equal and that HASH_BITS >= 8. + */ + scan += 2, match += 2; + Assert(*scan == *match, "match[2]?"); + + /* We check for insufficient lookahead only every 8th comparison; + * the 256th check will be made at strstart+258. + */ + do { + } while (*++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + scan < strend); + + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + + len = MAX_MATCH - (int)(strend - scan); + + if (len < MIN_MATCH) return MIN_MATCH - 1; + + s->match_start = cur_match; + return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead; +} + +#endif /* FASTEST */ + +#ifdef DEBUG +/* =========================================================================== + * Check that the match at match_start is indeed a match. + */ +local void check_match(s, start, match, length) + deflate_state *s; + IPos start, match; + int length; +{ + /* check that the match is indeed a match */ + if (zmemcmp(s->window + match, + s->window + start, length) != EQUAL) { + fprintf(stderr, " start %u, match %u, length %d\n", + start, match, length); + do { + fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); + } while (--length != 0); + z_error("invalid match"); + } + if (z_verbose > 1) { + fprintf(stderr,"\\[%d,%d]", start-match, length); + do { putc(s->window[start++], stderr); } while (--length != 0); + } +} +#else +# define check_match(s, start, match, length) +#endif /* DEBUG */ + +/* =========================================================================== + * Fill the window when the lookahead becomes insufficient. + * Updates strstart and lookahead. + * + * IN assertion: lookahead < MIN_LOOKAHEAD + * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD + * At least one byte has been read, or avail_in == 0; reads are + * performed for at least two bytes (required for the zip translate_eol + * option -- not supported here). + */ +local void fill_window(s) + deflate_state *s; +{ + register unsigned n, m; + register Posf *p; + unsigned more; /* Amount of free space at the end of the window. */ + uInt wsize = s->w_size; + + Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead"); + + do { + more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); + + /* Deal with !@#$% 64K limit: */ + if (sizeof(int) <= 2) { + if (more == 0 && s->strstart == 0 && s->lookahead == 0) { + more = wsize; + + } else if (more == (unsigned)(-1)) { + /* Very unlikely, but possible on 16 bit machine if + * strstart == 0 && lookahead == 1 (input done a byte at time) + */ + more--; + } + } + + /* If the window is almost full and there is insufficient lookahead, + * move the upper half to the lower one to make room in the upper half. + */ + if (s->strstart >= wsize+MAX_DIST(s)) { + + zmemcpy(s->window, s->window+wsize, (unsigned)wsize); + s->match_start -= wsize; + s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ + s->block_start -= (long) wsize; + + /* Slide the hash table (could be avoided with 32 bit values + at the expense of memory usage). We slide even when level == 0 + to keep the hash table consistent if we switch back to level > 0 + later. (Using level 0 permanently is not an optimal usage of + zlib, so we don't care about this pathological case.) + */ + n = s->hash_size; + p = &s->head[n]; + do { + m = *--p; + *p = (Pos)(m >= wsize ? m-wsize : NIL); + } while (--n); + + n = wsize; +#ifndef FASTEST + p = &s->prev[n]; + do { + m = *--p; + *p = (Pos)(m >= wsize ? m-wsize : NIL); + /* If n is not on any hash chain, prev[n] is garbage but + * its value will never be used. + */ + } while (--n); +#endif + more += wsize; + } + if (s->strm->avail_in == 0) break; + + /* If there was no sliding: + * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && + * more == window_size - lookahead - strstart + * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) + * => more >= window_size - 2*WSIZE + 2 + * In the BIG_MEM or MMAP case (not yet supported), + * window_size == input_size + MIN_LOOKAHEAD && + * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. + * Otherwise, window_size == 2*WSIZE so more >= 2. + * If there was sliding, more >= WSIZE. So in all cases, more >= 2. + */ + Assert(more >= 2, "more < 2"); + + n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); + s->lookahead += n; + + /* Initialize the hash value now that we have some input: */ + if (s->lookahead + s->insert >= MIN_MATCH) { + uInt str = s->strstart - s->insert; + s->ins_h = s->window[str]; + UPDATE_HASH(s, s->ins_h, s->window[str + 1]); +#if MIN_MATCH != 3 + Call UPDATE_HASH() MIN_MATCH-3 more times +#endif + while (s->insert) { + UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); +#ifndef FASTEST + s->prev[str & s->w_mask] = s->head[s->ins_h]; +#endif + s->head[s->ins_h] = (Pos)str; + str++; + s->insert--; + if (s->lookahead + s->insert < MIN_MATCH) + break; + } + } + /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, + * but this is not important since only literal bytes will be emitted. + */ + + } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); + + /* If the WIN_INIT bytes after the end of the current data have never been + * written, then zero those bytes in order to avoid memory check reports of + * the use of uninitialized (or uninitialised as Julian writes) bytes by + * the longest match routines. Update the high water mark for the next + * time through here. WIN_INIT is set to MAX_MATCH since the longest match + * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead. + */ + if (s->high_water < s->window_size) { + ulg curr = s->strstart + (ulg)(s->lookahead); + ulg init; + + if (s->high_water < curr) { + /* Previous high water mark below current data -- zero WIN_INIT + * bytes or up to end of window, whichever is less. + */ + init = s->window_size - curr; + if (init > WIN_INIT) + init = WIN_INIT; + zmemzero(s->window + curr, (unsigned)init); + s->high_water = curr + init; + } + else if (s->high_water < (ulg)curr + WIN_INIT) { + /* High water mark at or above current data, but below current data + * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up + * to end of window, whichever is less. + */ + init = (ulg)curr + WIN_INIT - s->high_water; + if (init > s->window_size - s->high_water) + init = s->window_size - s->high_water; + zmemzero(s->window + s->high_water, (unsigned)init); + s->high_water += init; + } + } + + Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD, + "not enough room for search"); +} + +/* =========================================================================== + * Flush the current block, with given end-of-file flag. + * IN assertion: strstart is set to the end of the current match. + */ +#define FLUSH_BLOCK_ONLY(s, last) { \ + _tr_flush_block(s, (s->block_start >= 0L ? \ + (charf *)&s->window[(unsigned)s->block_start] : \ + (charf *)Z_NULL), \ + (ulg)((long)s->strstart - s->block_start), \ + (last)); \ + s->block_start = s->strstart; \ + flush_pending(s->strm); \ + Tracev((stderr,"[FLUSH]")); \ +} + +/* Same but force premature exit if necessary. */ +#define FLUSH_BLOCK(s, last) { \ + FLUSH_BLOCK_ONLY(s, last); \ + if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \ +} + +/* =========================================================================== + * Copy without compression as much as possible from the input stream, return + * the current block state. + * This function does not insert new strings in the dictionary since + * uncompressible data is probably not useful. This function is used + * only for the level=0 compression option. + * NOTE: this function should be optimized to avoid extra copying from + * window to pending_buf. + */ +local block_state deflate_stored(s, flush) + deflate_state *s; + int flush; +{ + /* Stored blocks are limited to 0xffff bytes, pending_buf is limited + * to pending_buf_size, and each stored block has a 5 byte header: + */ + ulg max_block_size = 0xffff; + ulg max_start; + + if (max_block_size > s->pending_buf_size - 5) { + max_block_size = s->pending_buf_size - 5; + } + + /* Copy as much as possible from input to output: */ + for (;;) { + /* Fill the window as much as possible: */ + if (s->lookahead <= 1) { + + Assert(s->strstart < s->w_size+MAX_DIST(s) || + s->block_start >= (long)s->w_size, "slide too late"); + + fill_window(s); + if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; + + if (s->lookahead == 0) break; /* flush the current block */ + } + Assert(s->block_start >= 0L, "block gone"); + + s->strstart += s->lookahead; + s->lookahead = 0; + + /* Emit a stored block if pending_buf will be full: */ + max_start = s->block_start + max_block_size; + if (s->strstart == 0 || (ulg)s->strstart >= max_start) { + /* strstart == 0 is possible when wraparound on 16-bit machine */ + s->lookahead = (uInt)(s->strstart - max_start); + s->strstart = (uInt)max_start; + FLUSH_BLOCK(s, 0); + } + /* Flush if we may have to slide, otherwise block_start may become + * negative and the data will be gone: + */ + if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { + FLUSH_BLOCK(s, 0); + } + } + s->insert = 0; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if ((long)s->strstart > s->block_start) + FLUSH_BLOCK(s, 0); + return block_done; +} + +/* =========================================================================== + * Compress as much as possible from the input stream, return the current + * block state. + * This function does not perform lazy evaluation of matches and inserts + * new strings in the dictionary only for unmatched strings or for short + * matches. It is used only for the fast compression options. + */ +local block_state deflate_fast(s, flush) + deflate_state *s; + int flush; +{ + IPos hash_head; /* head of the hash chain */ + int bflush; /* set if current block must be flushed */ + + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the next match, plus MIN_MATCH bytes to insert the + * string following the next match. + */ + if (s->lookahead < MIN_LOOKAHEAD) { + fill_window(s); + if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* Insert the string window[strstart .. strstart+2] in the + * dictionary, and set hash_head to the head of the hash chain: + */ + hash_head = NIL; + if (s->lookahead >= MIN_MATCH) { + INSERT_STRING(s, s->strstart, hash_head); + } + + /* Find the longest match, discarding those <= prev_length. + * At this point we have always match_length < MIN_MATCH + */ + if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { + /* To simplify the code, we prevent matches with the string + * of window index 0 (in particular we have to avoid a match + * of the string with itself at the start of the input file). + */ + s->match_length = longest_match (s, hash_head); + /* longest_match() sets match_start */ + } + if (s->match_length >= MIN_MATCH) { + check_match(s, s->strstart, s->match_start, s->match_length); + + _tr_tally_dist(s, s->strstart - s->match_start, + s->match_length - MIN_MATCH, bflush); + + s->lookahead -= s->match_length; + + /* Insert new strings in the hash table only if the match length + * is not too large. This saves time but degrades compression. + */ +#ifndef FASTEST + if (s->match_length <= s->max_insert_length && + s->lookahead >= MIN_MATCH) { + s->match_length--; /* string at strstart already in table */ + do { + s->strstart++; + INSERT_STRING(s, s->strstart, hash_head); + /* strstart never exceeds WSIZE-MAX_MATCH, so there are + * always MIN_MATCH bytes ahead. + */ + } while (--s->match_length != 0); + s->strstart++; + } else +#endif + { + s->strstart += s->match_length; + s->match_length = 0; + s->ins_h = s->window[s->strstart]; + UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); +#if MIN_MATCH != 3 + Call UPDATE_HASH() MIN_MATCH-3 more times +#endif + /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not + * matter since it will be recomputed at next deflate call. + */ + } + } else { + /* No match, output a literal byte */ + Tracevv((stderr,"%c", s->window[s->strstart])); + _tr_tally_lit (s, s->window[s->strstart], bflush); + s->lookahead--; + s->strstart++; + } + if (bflush) FLUSH_BLOCK(s, 0); + } + s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; +} + +#ifndef FASTEST +/* =========================================================================== + * Same as above, but achieves better compression. We use a lazy + * evaluation for matches: a match is finally adopted only if there is + * no better match at the next window position. + */ +local block_state deflate_slow(s, flush) + deflate_state *s; + int flush; +{ + IPos hash_head; /* head of hash chain */ + int bflush; /* set if current block must be flushed */ + + /* Process the input block. */ + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the next match, plus MIN_MATCH bytes to insert the + * string following the next match. + */ + if (s->lookahead < MIN_LOOKAHEAD) { + fill_window(s); + if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* Insert the string window[strstart .. strstart+2] in the + * dictionary, and set hash_head to the head of the hash chain: + */ + hash_head = NIL; + if (s->lookahead >= MIN_MATCH) { + INSERT_STRING(s, s->strstart, hash_head); + } + + /* Find the longest match, discarding those <= prev_length. + */ + s->prev_length = s->match_length, s->prev_match = s->match_start; + s->match_length = MIN_MATCH-1; + + if (hash_head != NIL && s->prev_length < s->max_lazy_match && + s->strstart - hash_head <= MAX_DIST(s)) { + /* To simplify the code, we prevent matches with the string + * of window index 0 (in particular we have to avoid a match + * of the string with itself at the start of the input file). + */ + s->match_length = longest_match (s, hash_head); + /* longest_match() sets match_start */ + + if (s->match_length <= 5 && (s->strategy == Z_FILTERED +#if TOO_FAR <= 32767 + || (s->match_length == MIN_MATCH && + s->strstart - s->match_start > TOO_FAR) +#endif + )) { + + /* If prev_match is also MIN_MATCH, match_start is garbage + * but we will ignore the current match anyway. + */ + s->match_length = MIN_MATCH-1; + } + } + /* If there was a match at the previous step and the current + * match is not better, output the previous match: + */ + if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { + uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; + /* Do not insert strings in hash table beyond this. */ + + check_match(s, s->strstart-1, s->prev_match, s->prev_length); + + _tr_tally_dist(s, s->strstart -1 - s->prev_match, + s->prev_length - MIN_MATCH, bflush); + + /* Insert in hash table all strings up to the end of the match. + * strstart-1 and strstart are already inserted. If there is not + * enough lookahead, the last two strings are not inserted in + * the hash table. + */ + s->lookahead -= s->prev_length-1; + s->prev_length -= 2; + do { + if (++s->strstart <= max_insert) { + INSERT_STRING(s, s->strstart, hash_head); + } + } while (--s->prev_length != 0); + s->match_available = 0; + s->match_length = MIN_MATCH-1; + s->strstart++; + + if (bflush) FLUSH_BLOCK(s, 0); + + } else if (s->match_available) { + /* If there was no match at the previous position, output a + * single literal. If there was a match but the current match + * is longer, truncate the previous match to a single literal. + */ + Tracevv((stderr,"%c", s->window[s->strstart-1])); + _tr_tally_lit(s, s->window[s->strstart-1], bflush); + if (bflush) { + FLUSH_BLOCK_ONLY(s, 0); + } + s->strstart++; + s->lookahead--; + if (s->strm->avail_out == 0) return need_more; + } else { + /* There is no previous match to compare with, wait for + * the next step to decide. + */ + s->match_available = 1; + s->strstart++; + s->lookahead--; + } + } + Assert (flush != Z_NO_FLUSH, "no flush?"); + if (s->match_available) { + Tracevv((stderr,"%c", s->window[s->strstart-1])); + _tr_tally_lit(s, s->window[s->strstart-1], bflush); + s->match_available = 0; + } + s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; +} +#endif /* FASTEST */ + +/* =========================================================================== + * For Z_RLE, simply look for runs of bytes, generate matches only of distance + * one. Do not maintain a hash table. (It will be regenerated if this run of + * deflate switches away from Z_RLE.) + */ +local block_state deflate_rle(s, flush) + deflate_state *s; + int flush; +{ + int bflush; /* set if current block must be flushed */ + uInt prev; /* byte at distance one to match */ + Bytef *scan, *strend; /* scan goes up to strend for length of run */ + + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the longest run, plus one for the unrolled loop. + */ + if (s->lookahead <= MAX_MATCH) { + fill_window(s); + if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* See how many times the previous byte repeats */ + s->match_length = 0; + if (s->lookahead >= MIN_MATCH && s->strstart > 0) { + scan = s->window + s->strstart - 1; + prev = *scan; + if (prev == *++scan && prev == *++scan && prev == *++scan) { + strend = s->window + s->strstart + MAX_MATCH; + do { + } while (prev == *++scan && prev == *++scan && + prev == *++scan && prev == *++scan && + prev == *++scan && prev == *++scan && + prev == *++scan && prev == *++scan && + scan < strend); + s->match_length = MAX_MATCH - (int)(strend - scan); + if (s->match_length > s->lookahead) + s->match_length = s->lookahead; + } + Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan"); + } + + /* Emit match if have run of MIN_MATCH or longer, else emit literal */ + if (s->match_length >= MIN_MATCH) { + check_match(s, s->strstart, s->strstart - 1, s->match_length); + + _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush); + + s->lookahead -= s->match_length; + s->strstart += s->match_length; + s->match_length = 0; + } else { + /* No match, output a literal byte */ + Tracevv((stderr,"%c", s->window[s->strstart])); + _tr_tally_lit (s, s->window[s->strstart], bflush); + s->lookahead--; + s->strstart++; + } + if (bflush) FLUSH_BLOCK(s, 0); + } + s->insert = 0; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; +} + +/* =========================================================================== + * For Z_HUFFMAN_ONLY, do not look for matches. Do not maintain a hash table. + * (It will be regenerated if this run of deflate switches away from Huffman.) + */ +local block_state deflate_huff(s, flush) + deflate_state *s; + int flush; +{ + int bflush; /* set if current block must be flushed */ + + for (;;) { + /* Make sure that we have a literal to write. */ + if (s->lookahead == 0) { + fill_window(s); + if (s->lookahead == 0) { + if (flush == Z_NO_FLUSH) + return need_more; + break; /* flush the current block */ + } + } + + /* Output a literal byte */ + s->match_length = 0; + Tracevv((stderr,"%c", s->window[s->strstart])); + _tr_tally_lit (s, s->window[s->strstart], bflush); + s->lookahead--; + s->strstart++; + if (bflush) FLUSH_BLOCK(s, 0); + } + s->insert = 0; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; +} diff --git a/src/SDL2/external/zlib-1.2.8/deflate.h b/src/SDL2/external/zlib-1.2.8/deflate.h new file mode 100644 index 000000000..ce0299edd --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/deflate.h @@ -0,0 +1,346 @@ +/* deflate.h -- internal compression state + * Copyright (C) 1995-2012 Jean-loup Gailly + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* @(#) $Id$ */ + +#ifndef DEFLATE_H +#define DEFLATE_H + +#include "zutil.h" + +/* define NO_GZIP when compiling if you want to disable gzip header and + trailer creation by deflate(). NO_GZIP would be used to avoid linking in + the crc code when it is not needed. For shared libraries, gzip encoding + should be left enabled. */ +#ifndef NO_GZIP +# define GZIP +#endif + +/* =========================================================================== + * Internal compression state. + */ + +#define LENGTH_CODES 29 +/* number of length codes, not counting the special END_BLOCK code */ + +#define LITERALS 256 +/* number of literal bytes 0..255 */ + +#define L_CODES (LITERALS+1+LENGTH_CODES) +/* number of Literal or Length codes, including the END_BLOCK code */ + +#define D_CODES 30 +/* number of distance codes */ + +#define BL_CODES 19 +/* number of codes used to transfer the bit lengths */ + +#define HEAP_SIZE (2*L_CODES+1) +/* maximum heap size */ + +#define MAX_BITS 15 +/* All codes must not exceed MAX_BITS bits */ + +#define Buf_size 16 +/* size of bit buffer in bi_buf */ + +#define INIT_STATE 42 +#define EXTRA_STATE 69 +#define NAME_STATE 73 +#define COMMENT_STATE 91 +#define HCRC_STATE 103 +#define BUSY_STATE 113 +#define FINISH_STATE 666 +/* Stream status */ + + +/* Data structure describing a single value and its code string. */ +typedef struct ct_data_s { + union { + ush freq; /* frequency count */ + ush code; /* bit string */ + } fc; + union { + ush dad; /* father node in Huffman tree */ + ush len; /* length of bit string */ + } dl; +} FAR ct_data; + +#define Freq fc.freq +#define Code fc.code +#define Dad dl.dad +#define Len dl.len + +typedef struct static_tree_desc_s static_tree_desc; + +typedef struct tree_desc_s { + ct_data *dyn_tree; /* the dynamic tree */ + int max_code; /* largest code with non zero frequency */ + static_tree_desc *stat_desc; /* the corresponding static tree */ +} FAR tree_desc; + +typedef ush Pos; +typedef Pos FAR Posf; +typedef unsigned IPos; + +/* A Pos is an index in the character window. We use short instead of int to + * save space in the various tables. IPos is used only for parameter passing. + */ + +typedef struct internal_state { + z_streamp strm; /* pointer back to this zlib stream */ + int status; /* as the name implies */ + Bytef *pending_buf; /* output still pending */ + ulg pending_buf_size; /* size of pending_buf */ + Bytef *pending_out; /* next pending byte to output to the stream */ + uInt pending; /* nb of bytes in the pending buffer */ + int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ + gz_headerp gzhead; /* gzip header information to write */ + uInt gzindex; /* where in extra, name, or comment */ + Byte method; /* can only be DEFLATED */ + int last_flush; /* value of flush param for previous deflate call */ + + /* used by deflate.c: */ + + uInt w_size; /* LZ77 window size (32K by default) */ + uInt w_bits; /* log2(w_size) (8..16) */ + uInt w_mask; /* w_size - 1 */ + + Bytef *window; + /* Sliding window. Input bytes are read into the second half of the window, + * and move to the first half later to keep a dictionary of at least wSize + * bytes. With this organization, matches are limited to a distance of + * wSize-MAX_MATCH bytes, but this ensures that IO is always + * performed with a length multiple of the block size. Also, it limits + * the window size to 64K, which is quite useful on MSDOS. + * To do: use the user input buffer as sliding window. + */ + + ulg window_size; + /* Actual size of window: 2*wSize, except when the user input buffer + * is directly used as sliding window. + */ + + Posf *prev; + /* Link to older string with same hash index. To limit the size of this + * array to 64K, this link is maintained only for the last 32K strings. + * An index in this array is thus a window index modulo 32K. + */ + + Posf *head; /* Heads of the hash chains or NIL. */ + + uInt ins_h; /* hash index of string to be inserted */ + uInt hash_size; /* number of elements in hash table */ + uInt hash_bits; /* log2(hash_size) */ + uInt hash_mask; /* hash_size-1 */ + + uInt hash_shift; + /* Number of bits by which ins_h must be shifted at each input + * step. It must be such that after MIN_MATCH steps, the oldest + * byte no longer takes part in the hash key, that is: + * hash_shift * MIN_MATCH >= hash_bits + */ + + long block_start; + /* Window position at the beginning of the current output block. Gets + * negative when the window is moved backwards. + */ + + uInt match_length; /* length of best match */ + IPos prev_match; /* previous match */ + int match_available; /* set if previous match exists */ + uInt strstart; /* start of string to insert */ + uInt match_start; /* start of matching string */ + uInt lookahead; /* number of valid bytes ahead in window */ + + uInt prev_length; + /* Length of the best match at previous step. Matches not greater than this + * are discarded. This is used in the lazy match evaluation. + */ + + uInt max_chain_length; + /* To speed up deflation, hash chains are never searched beyond this + * length. A higher limit improves compression ratio but degrades the + * speed. + */ + + uInt max_lazy_match; + /* Attempt to find a better match only when the current match is strictly + * smaller than this value. This mechanism is used only for compression + * levels >= 4. + */ +# define max_insert_length max_lazy_match + /* Insert new strings in the hash table only if the match length is not + * greater than this length. This saves time but degrades compression. + * max_insert_length is used only for compression levels <= 3. + */ + + int level; /* compression level (1..9) */ + int strategy; /* favor or force Huffman coding*/ + + uInt good_match; + /* Use a faster search when the previous match is longer than this */ + + int nice_match; /* Stop searching when current match exceeds this */ + + /* used by trees.c: */ + /* Didn't use ct_data typedef below to suppress compiler warning */ + struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */ + struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */ + struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */ + + struct tree_desc_s l_desc; /* desc. for literal tree */ + struct tree_desc_s d_desc; /* desc. for distance tree */ + struct tree_desc_s bl_desc; /* desc. for bit length tree */ + + ush bl_count[MAX_BITS+1]; + /* number of codes at each bit length for an optimal tree */ + + int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */ + int heap_len; /* number of elements in the heap */ + int heap_max; /* element of largest frequency */ + /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. + * The same heap array is used to build all trees. + */ + + uch depth[2*L_CODES+1]; + /* Depth of each subtree used as tie breaker for trees of equal frequency + */ + + uchf *l_buf; /* buffer for literals or lengths */ + + uInt lit_bufsize; + /* Size of match buffer for literals/lengths. There are 4 reasons for + * limiting lit_bufsize to 64K: + * - frequencies can be kept in 16 bit counters + * - if compression is not successful for the first block, all input + * data is still in the window so we can still emit a stored block even + * when input comes from standard input. (This can also be done for + * all blocks if lit_bufsize is not greater than 32K.) + * - if compression is not successful for a file smaller than 64K, we can + * even emit a stored file instead of a stored block (saving 5 bytes). + * This is applicable only for zip (not gzip or zlib). + * - creating new Huffman trees less frequently may not provide fast + * adaptation to changes in the input data statistics. (Take for + * example a binary file with poorly compressible code followed by + * a highly compressible string table.) Smaller buffer sizes give + * fast adaptation but have of course the overhead of transmitting + * trees more frequently. + * - I can't count above 4 + */ + + uInt last_lit; /* running index in l_buf */ + + ushf *d_buf; + /* Buffer for distances. To simplify the code, d_buf and l_buf have + * the same number of elements. To use different lengths, an extra flag + * array would be necessary. + */ + + ulg opt_len; /* bit length of current block with optimal trees */ + ulg static_len; /* bit length of current block with static trees */ + uInt matches; /* number of string matches in current block */ + uInt insert; /* bytes at end of window left to insert */ + +#ifdef DEBUG + ulg compressed_len; /* total bit length of compressed file mod 2^32 */ + ulg bits_sent; /* bit length of compressed data sent mod 2^32 */ +#endif + + ush bi_buf; + /* Output buffer. bits are inserted starting at the bottom (least + * significant bits). + */ + int bi_valid; + /* Number of valid bits in bi_buf. All bits above the last valid bit + * are always zero. + */ + + ulg high_water; + /* High water mark offset in window for initialized bytes -- bytes above + * this are set to zero in order to avoid memory check warnings when + * longest match routines access bytes past the input. This is then + * updated to the new high water mark. + */ + +} FAR deflate_state; + +/* Output a byte on the stream. + * IN assertion: there is enough room in pending_buf. + */ +#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);} + + +#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) +/* Minimum amount of lookahead, except at the end of the input file. + * See deflate.c for comments about the MIN_MATCH+1. + */ + +#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD) +/* In order to simplify the code, particularly on 16 bit machines, match + * distances are limited to MAX_DIST instead of WSIZE. + */ + +#define WIN_INIT MAX_MATCH +/* Number of bytes after end of data in window to initialize in order to avoid + memory checker errors from longest match routines */ + + /* in trees.c */ +void ZLIB_INTERNAL _tr_init OF((deflate_state *s)); +int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc)); +void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf, + ulg stored_len, int last)); +void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s)); +void ZLIB_INTERNAL _tr_align OF((deflate_state *s)); +void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf, + ulg stored_len, int last)); + +#define d_code(dist) \ + ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)]) +/* Mapping from a distance to a distance code. dist is the distance - 1 and + * must not have side effects. _dist_code[256] and _dist_code[257] are never + * used. + */ + +#ifndef DEBUG +/* Inline versions of _tr_tally for speed: */ + +#if defined(GEN_TREES_H) || !defined(STDC) + extern uch ZLIB_INTERNAL _length_code[]; + extern uch ZLIB_INTERNAL _dist_code[]; +#else + extern const uch ZLIB_INTERNAL _length_code[]; + extern const uch ZLIB_INTERNAL _dist_code[]; +#endif + +# define _tr_tally_lit(s, c, flush) \ + { uch cc = (c); \ + s->d_buf[s->last_lit] = 0; \ + s->l_buf[s->last_lit++] = cc; \ + s->dyn_ltree[cc].Freq++; \ + flush = (s->last_lit == s->lit_bufsize-1); \ + } +# define _tr_tally_dist(s, distance, length, flush) \ + { uch len = (length); \ + ush dist = (distance); \ + s->d_buf[s->last_lit] = dist; \ + s->l_buf[s->last_lit++] = len; \ + dist--; \ + s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \ + s->dyn_dtree[d_code(dist)].Freq++; \ + flush = (s->last_lit == s->lit_bufsize-1); \ + } +#else +# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c) +# define _tr_tally_dist(s, distance, length, flush) \ + flush = _tr_tally(s, distance, length) +#endif + +#endif /* DEFLATE_H */ diff --git a/src/SDL2/external/zlib-1.2.8/doc/algorithm.txt b/src/SDL2/external/zlib-1.2.8/doc/algorithm.txt new file mode 100644 index 000000000..c97f49502 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/doc/algorithm.txt @@ -0,0 +1,209 @@ +1. Compression algorithm (deflate) + +The deflation algorithm used by gzip (also zip and zlib) is a variation of +LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in +the input data. The second occurrence of a string is replaced by a +pointer to the previous string, in the form of a pair (distance, +length). Distances are limited to 32K bytes, and lengths are limited +to 258 bytes. When a string does not occur anywhere in the previous +32K bytes, it is emitted as a sequence of literal bytes. (In this +description, `string' must be taken as an arbitrary sequence of bytes, +and is not restricted to printable characters.) + +Literals or match lengths are compressed with one Huffman tree, and +match distances are compressed with another tree. The trees are stored +in a compact form at the start of each block. The blocks can have any +size (except that the compressed data for one block must fit in +available memory). A block is terminated when deflate() determines that +it would be useful to start another block with fresh trees. (This is +somewhat similar to the behavior of LZW-based _compress_.) + +Duplicated strings are found using a hash table. All input strings of +length 3 are inserted in the hash table. A hash index is computed for +the next 3 bytes. If the hash chain for this index is not empty, all +strings in the chain are compared with the current input string, and +the longest match is selected. + +The hash chains are searched starting with the most recent strings, to +favor small distances and thus take advantage of the Huffman encoding. +The hash chains are singly linked. There are no deletions from the +hash chains, the algorithm simply discards matches that are too old. + +To avoid a worst-case situation, very long hash chains are arbitrarily +truncated at a certain length, determined by a runtime option (level +parameter of deflateInit). So deflate() does not always find the longest +possible match but generally finds a match which is long enough. + +deflate() also defers the selection of matches with a lazy evaluation +mechanism. After a match of length N has been found, deflate() searches for +a longer match at the next input byte. If a longer match is found, the +previous match is truncated to a length of one (thus producing a single +literal byte) and the process of lazy evaluation begins again. Otherwise, +the original match is kept, and the next match search is attempted only N +steps later. + +The lazy match evaluation is also subject to a runtime parameter. If +the current match is long enough, deflate() reduces the search for a longer +match, thus speeding up the whole process. If compression ratio is more +important than speed, deflate() attempts a complete second search even if +the first match is already long enough. + +The lazy match evaluation is not performed for the fastest compression +modes (level parameter 1 to 3). For these fast modes, new strings +are inserted in the hash table only when no match was found, or +when the match is not too long. This degrades the compression ratio +but saves time since there are both fewer insertions and fewer searches. + + +2. Decompression algorithm (inflate) + +2.1 Introduction + +The key question is how to represent a Huffman code (or any prefix code) so +that you can decode fast. The most important characteristic is that shorter +codes are much more common than longer codes, so pay attention to decoding the +short codes fast, and let the long codes take longer to decode. + +inflate() sets up a first level table that covers some number of bits of +input less than the length of longest code. It gets that many bits from the +stream, and looks it up in the table. The table will tell if the next +code is that many bits or less and how many, and if it is, it will tell +the value, else it will point to the next level table for which inflate() +grabs more bits and tries to decode a longer code. + +How many bits to make the first lookup is a tradeoff between the time it +takes to decode and the time it takes to build the table. If building the +table took no time (and if you had infinite memory), then there would only +be a first level table to cover all the way to the longest code. However, +building the table ends up taking a lot longer for more bits since short +codes are replicated many times in such a table. What inflate() does is +simply to make the number of bits in the first table a variable, and then +to set that variable for the maximum speed. + +For inflate, which has 286 possible codes for the literal/length tree, the size +of the first table is nine bits. Also the distance trees have 30 possible +values, and the size of the first table is six bits. Note that for each of +those cases, the table ended up one bit longer than the ``average'' code +length, i.e. the code length of an approximately flat code which would be a +little more than eight bits for 286 symbols and a little less than five bits +for 30 symbols. + + +2.2 More details on the inflate table lookup + +Ok, you want to know what this cleverly obfuscated inflate tree actually +looks like. You are correct that it's not a Huffman tree. It is simply a +lookup table for the first, let's say, nine bits of a Huffman symbol. The +symbol could be as short as one bit or as long as 15 bits. If a particular +symbol is shorter than nine bits, then that symbol's translation is duplicated +in all those entries that start with that symbol's bits. For example, if the +symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a +symbol is nine bits long, it appears in the table once. + +If the symbol is longer than nine bits, then that entry in the table points +to another similar table for the remaining bits. Again, there are duplicated +entries as needed. The idea is that most of the time the symbol will be short +and there will only be one table look up. (That's whole idea behind data +compression in the first place.) For the less frequent long symbols, there +will be two lookups. If you had a compression method with really long +symbols, you could have as many levels of lookups as is efficient. For +inflate, two is enough. + +So a table entry either points to another table (in which case nine bits in +the above example are gobbled), or it contains the translation for the symbol +and the number of bits to gobble. Then you start again with the next +ungobbled bit. + +You may wonder: why not just have one lookup table for how ever many bits the +longest symbol is? The reason is that if you do that, you end up spending +more time filling in duplicate symbol entries than you do actually decoding. +At least for deflate's output that generates new trees every several 10's of +kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code +would take too long if you're only decoding several thousand symbols. At the +other extreme, you could make a new table for every bit in the code. In fact, +that's essentially a Huffman tree. But then you spend too much time +traversing the tree while decoding, even for short symbols. + +So the number of bits for the first lookup table is a trade of the time to +fill out the table vs. the time spent looking at the second level and above of +the table. + +Here is an example, scaled down: + +The code being decoded, with 10 symbols, from 1 to 6 bits long: + +A: 0 +B: 10 +C: 1100 +D: 11010 +E: 11011 +F: 11100 +G: 11101 +H: 11110 +I: 111110 +J: 111111 + +Let's make the first table three bits long (eight entries): + +000: A,1 +001: A,1 +010: A,1 +011: A,1 +100: B,2 +101: B,2 +110: -> table X (gobble 3 bits) +111: -> table Y (gobble 3 bits) + +Each entry is what the bits decode as and how many bits that is, i.e. how +many bits to gobble. Or the entry points to another table, with the number of +bits to gobble implicit in the size of the table. + +Table X is two bits long since the longest code starting with 110 is five bits +long: + +00: C,1 +01: C,1 +10: D,2 +11: E,2 + +Table Y is three bits long since the longest code starting with 111 is six +bits long: + +000: F,2 +001: F,2 +010: G,2 +011: G,2 +100: H,2 +101: H,2 +110: I,3 +111: J,3 + +So what we have here are three tables with a total of 20 entries that had to +be constructed. That's compared to 64 entries for a single table. Or +compared to 16 entries for a Huffman tree (six two entry tables and one four +entry table). Assuming that the code ideally represents the probability of +the symbols, it takes on the average 1.25 lookups per symbol. That's compared +to one lookup for the single table, or 1.66 lookups per symbol for the +Huffman tree. + +There, I think that gives you a picture of what's going on. For inflate, the +meaning of a particular symbol is often more than just a letter. It can be a +byte (a "literal"), or it can be either a length or a distance which +indicates a base value and a number of bits to fetch after the code that is +added to the base value. Or it might be the special end-of-block code. The +data structures created in inftrees.c try to encode all that information +compactly in the tables. + + +Jean-loup Gailly Mark Adler +jloup@gzip.org madler@alumni.caltech.edu + + +References: + +[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data +Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3, +pp. 337-343. + +``DEFLATE Compressed Data Format Specification'' available in +http://tools.ietf.org/html/rfc1951 diff --git a/src/SDL2/external/zlib-1.2.8/doc/rfc1950.txt b/src/SDL2/external/zlib-1.2.8/doc/rfc1950.txt new file mode 100644 index 000000000..ce6428a0f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/doc/rfc1950.txt @@ -0,0 +1,619 @@ + + + + + + +Network Working Group P. Deutsch +Request for Comments: 1950 Aladdin Enterprises +Category: Informational J-L. Gailly + Info-ZIP + May 1996 + + + ZLIB Compressed Data Format Specification version 3.3 + +Status of This Memo + + This memo provides information for the Internet community. This memo + does not specify an Internet standard of any kind. Distribution of + this memo is unlimited. + +IESG Note: + + The IESG takes no position on the validity of any Intellectual + Property Rights statements contained in this document. + +Notices + + Copyright (c) 1996 L. Peter Deutsch and Jean-Loup Gailly + + Permission is granted to copy and distribute this document for any + purpose and without charge, including translations into other + languages and incorporation into compilations, provided that the + copyright notice and this notice are preserved, and that any + substantive changes or deletions from the original are clearly + marked. + + A pointer to the latest version of this and related documentation in + HTML format can be found at the URL + . + +Abstract + + This specification defines a lossless compressed data format. The + data can be produced or consumed, even for an arbitrarily long + sequentially presented input data stream, using only an a priori + bounded amount of intermediate storage. The format presently uses + the DEFLATE compression method but can be easily extended to use + other compression methods. It can be implemented readily in a manner + not covered by patents. This specification also defines the ADLER-32 + checksum (an extension and improvement of the Fletcher checksum), + used for detection of data corruption, and provides an algorithm for + computing it. + + + + +Deutsch & Gailly Informational [Page 1] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +Table of Contents + + 1. Introduction ................................................... 2 + 1.1. Purpose ................................................... 2 + 1.2. Intended audience ......................................... 3 + 1.3. Scope ..................................................... 3 + 1.4. Compliance ................................................ 3 + 1.5. Definitions of terms and conventions used ................ 3 + 1.6. Changes from previous versions ............................ 3 + 2. Detailed specification ......................................... 3 + 2.1. Overall conventions ....................................... 3 + 2.2. Data format ............................................... 4 + 2.3. Compliance ................................................ 7 + 3. References ..................................................... 7 + 4. Source code .................................................... 8 + 5. Security Considerations ........................................ 8 + 6. Acknowledgements ............................................... 8 + 7. Authors' Addresses ............................................. 8 + 8. Appendix: Rationale ............................................ 9 + 9. Appendix: Sample code ..........................................10 + +1. Introduction + + 1.1. Purpose + + The purpose of this specification is to define a lossless + compressed data format that: + + * Is independent of CPU type, operating system, file system, + and character set, and hence can be used for interchange; + + * Can be produced or consumed, even for an arbitrarily long + sequentially presented input data stream, using only an a + priori bounded amount of intermediate storage, and hence can + be used in data communications or similar structures such as + Unix filters; + + * Can use a number of different compression methods; + + * Can be implemented readily in a manner not covered by + patents, and hence can be practiced freely. + + The data format defined by this specification does not attempt to + allow random access to compressed data. + + + + + + + +Deutsch & Gailly Informational [Page 2] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + 1.2. Intended audience + + This specification is intended for use by implementors of software + to compress data into zlib format and/or decompress data from zlib + format. + + The text of the specification assumes a basic background in + programming at the level of bits and other primitive data + representations. + + 1.3. Scope + + The specification specifies a compressed data format that can be + used for in-memory compression of a sequence of arbitrary bytes. + + 1.4. Compliance + + Unless otherwise indicated below, a compliant decompressor must be + able to accept and decompress any data set that conforms to all + the specifications presented here; a compliant compressor must + produce data sets that conform to all the specifications presented + here. + + 1.5. Definitions of terms and conventions used + + byte: 8 bits stored or transmitted as a unit (same as an octet). + (For this specification, a byte is exactly 8 bits, even on + machines which store a character on a number of bits different + from 8.) See below, for the numbering of bits within a byte. + + 1.6. Changes from previous versions + + Version 3.1 was the first public release of this specification. + In version 3.2, some terminology was changed and the Adler-32 + sample code was rewritten for clarity. In version 3.3, the + support for a preset dictionary was introduced, and the + specification was converted to RFC style. + +2. Detailed specification + + 2.1. Overall conventions + + In the diagrams below, a box like this: + + +---+ + | | <-- the vertical bars might be missing + +---+ + + + + +Deutsch & Gailly Informational [Page 3] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + represents one byte; a box like this: + + +==============+ + | | + +==============+ + + represents a variable number of bytes. + + Bytes stored within a computer do not have a "bit order", since + they are always treated as a unit. However, a byte considered as + an integer between 0 and 255 does have a most- and least- + significant bit, and since we write numbers with the most- + significant digit on the left, we also write bytes with the most- + significant bit on the left. In the diagrams below, we number the + bits of a byte so that bit 0 is the least-significant bit, i.e., + the bits are numbered: + + +--------+ + |76543210| + +--------+ + + Within a computer, a number may occupy multiple bytes. All + multi-byte numbers in the format described here are stored with + the MOST-significant byte first (at the lower memory address). + For example, the decimal number 520 is stored as: + + 0 1 + +--------+--------+ + |00000010|00001000| + +--------+--------+ + ^ ^ + | | + | + less significant byte = 8 + + more significant byte = 2 x 256 + + 2.2. Data format + + A zlib stream has the following structure: + + 0 1 + +---+---+ + |CMF|FLG| (more-->) + +---+---+ + + + + + + + + +Deutsch & Gailly Informational [Page 4] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + (if FLG.FDICT set) + + 0 1 2 3 + +---+---+---+---+ + | DICTID | (more-->) + +---+---+---+---+ + + +=====================+---+---+---+---+ + |...compressed data...| ADLER32 | + +=====================+---+---+---+---+ + + Any data which may appear after ADLER32 are not part of the zlib + stream. + + CMF (Compression Method and flags) + This byte is divided into a 4-bit compression method and a 4- + bit information field depending on the compression method. + + bits 0 to 3 CM Compression method + bits 4 to 7 CINFO Compression info + + CM (Compression method) + This identifies the compression method used in the file. CM = 8 + denotes the "deflate" compression method with a window size up + to 32K. This is the method used by gzip and PNG (see + references [1] and [2] in Chapter 3, below, for the reference + documents). CM = 15 is reserved. It might be used in a future + version of this specification to indicate the presence of an + extra field before the compressed data. + + CINFO (Compression info) + For CM = 8, CINFO is the base-2 logarithm of the LZ77 window + size, minus eight (CINFO=7 indicates a 32K window size). Values + of CINFO above 7 are not allowed in this version of the + specification. CINFO is not defined in this specification for + CM not equal to 8. + + FLG (FLaGs) + This flag byte is divided as follows: + + bits 0 to 4 FCHECK (check bits for CMF and FLG) + bit 5 FDICT (preset dictionary) + bits 6 to 7 FLEVEL (compression level) + + The FCHECK value must be such that CMF and FLG, when viewed as + a 16-bit unsigned integer stored in MSB order (CMF*256 + FLG), + is a multiple of 31. + + + + +Deutsch & Gailly Informational [Page 5] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + FDICT (Preset dictionary) + If FDICT is set, a DICT dictionary identifier is present + immediately after the FLG byte. The dictionary is a sequence of + bytes which are initially fed to the compressor without + producing any compressed output. DICT is the Adler-32 checksum + of this sequence of bytes (see the definition of ADLER32 + below). The decompressor can use this identifier to determine + which dictionary has been used by the compressor. + + FLEVEL (Compression level) + These flags are available for use by specific compression + methods. The "deflate" method (CM = 8) sets these flags as + follows: + + 0 - compressor used fastest algorithm + 1 - compressor used fast algorithm + 2 - compressor used default algorithm + 3 - compressor used maximum compression, slowest algorithm + + The information in FLEVEL is not needed for decompression; it + is there to indicate if recompression might be worthwhile. + + compressed data + For compression method 8, the compressed data is stored in the + deflate compressed data format as described in the document + "DEFLATE Compressed Data Format Specification" by L. Peter + Deutsch. (See reference [3] in Chapter 3, below) + + Other compressed data formats are not specified in this version + of the zlib specification. + + ADLER32 (Adler-32 checksum) + This contains a checksum value of the uncompressed data + (excluding any dictionary data) computed according to Adler-32 + algorithm. This algorithm is a 32-bit extension and improvement + of the Fletcher algorithm, used in the ITU-T X.224 / ISO 8073 + standard. See references [4] and [5] in Chapter 3, below) + + Adler-32 is composed of two sums accumulated per byte: s1 is + the sum of all bytes, s2 is the sum of all s1 values. Both sums + are done modulo 65521. s1 is initialized to 1, s2 to zero. The + Adler-32 checksum is stored as s2*65536 + s1 in most- + significant-byte first (network) order. + + + + + + + + +Deutsch & Gailly Informational [Page 6] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + 2.3. Compliance + + A compliant compressor must produce streams with correct CMF, FLG + and ADLER32, but need not support preset dictionaries. When the + zlib data format is used as part of another standard data format, + the compressor may use only preset dictionaries that are specified + by this other data format. If this other format does not use the + preset dictionary feature, the compressor must not set the FDICT + flag. + + A compliant decompressor must check CMF, FLG, and ADLER32, and + provide an error indication if any of these have incorrect values. + A compliant decompressor must give an error indication if CM is + not one of the values defined in this specification (only the + value 8 is permitted in this version), since another value could + indicate the presence of new features that would cause subsequent + data to be interpreted incorrectly. A compliant decompressor must + give an error indication if FDICT is set and DICTID is not the + identifier of a known preset dictionary. A decompressor may + ignore FLEVEL and still be compliant. When the zlib data format + is being used as a part of another standard format, a compliant + decompressor must support all the preset dictionaries specified by + the other format. When the other format does not use the preset + dictionary feature, a compliant decompressor must reject any + stream in which the FDICT flag is set. + +3. References + + [1] Deutsch, L.P.,"GZIP Compressed Data Format Specification", + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [2] Thomas Boutell, "PNG (Portable Network Graphics) specification", + available in ftp://ftp.uu.net/graphics/png/documents/ + + [3] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification", + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [4] Fletcher, J. G., "An Arithmetic Checksum for Serial + Transmissions," IEEE Transactions on Communications, Vol. COM-30, + No. 1, January 1982, pp. 247-252. + + [5] ITU-T Recommendation X.224, Annex D, "Checksum Algorithms," + November, 1993, pp. 144, 145. (Available from + gopher://info.itu.ch). ITU-T X.244 is also the same as ISO 8073. + + + + + + + +Deutsch & Gailly Informational [Page 7] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +4. Source code + + Source code for a C language implementation of a "zlib" compliant + library is available at ftp://ftp.uu.net/pub/archiving/zip/zlib/. + +5. Security Considerations + + A decoder that fails to check the ADLER32 checksum value may be + subject to undetected data corruption. + +6. Acknowledgements + + Trademarks cited in this document are the property of their + respective owners. + + Jean-Loup Gailly and Mark Adler designed the zlib format and wrote + the related software described in this specification. Glenn + Randers-Pehrson converted this document to RFC and HTML format. + +7. Authors' Addresses + + L. Peter Deutsch + Aladdin Enterprises + 203 Santa Margarita Ave. + Menlo Park, CA 94025 + + Phone: (415) 322-0103 (AM only) + FAX: (415) 322-1734 + EMail: + + + Jean-Loup Gailly + + EMail: + + Questions about the technical content of this specification can be + sent by email to + + Jean-Loup Gailly and + Mark Adler + + Editorial comments on this specification can be sent by email to + + L. Peter Deutsch and + Glenn Randers-Pehrson + + + + + + +Deutsch & Gailly Informational [Page 8] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +8. Appendix: Rationale + + 8.1. Preset dictionaries + + A preset dictionary is specially useful to compress short input + sequences. The compressor can take advantage of the dictionary + context to encode the input in a more compact manner. The + decompressor can be initialized with the appropriate context by + virtually decompressing a compressed version of the dictionary + without producing any output. However for certain compression + algorithms such as the deflate algorithm this operation can be + achieved without actually performing any decompression. + + The compressor and the decompressor must use exactly the same + dictionary. The dictionary may be fixed or may be chosen among a + certain number of predefined dictionaries, according to the kind + of input data. The decompressor can determine which dictionary has + been chosen by the compressor by checking the dictionary + identifier. This document does not specify the contents of + predefined dictionaries, since the optimal dictionaries are + application specific. Standard data formats using this feature of + the zlib specification must precisely define the allowed + dictionaries. + + 8.2. The Adler-32 algorithm + + The Adler-32 algorithm is much faster than the CRC32 algorithm yet + still provides an extremely low probability of undetected errors. + + The modulo on unsigned long accumulators can be delayed for 5552 + bytes, so the modulo operation time is negligible. If the bytes + are a, b, c, the second sum is 3a + 2b + c + 3, and so is position + and order sensitive, unlike the first sum, which is just a + checksum. That 65521 is prime is important to avoid a possible + large class of two-byte errors that leave the check unchanged. + (The Fletcher checksum uses 255, which is not prime and which also + makes the Fletcher check insensitive to single byte changes 0 <-> + 255.) + + The sum s1 is initialized to 1 instead of zero to make the length + of the sequence part of s2, so that the length does not have to be + checked separately. (Any sequence of zeroes has a Fletcher + checksum of zero.) + + + + + + + + +Deutsch & Gailly Informational [Page 9] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +9. Appendix: Sample code + + The following C code computes the Adler-32 checksum of a data buffer. + It is written for clarity, not for speed. The sample code is in the + ANSI C programming language. Non C users may find it easier to read + with these hints: + + & Bitwise AND operator. + >> Bitwise right shift operator. When applied to an + unsigned quantity, as here, right shift inserts zero bit(s) + at the left. + << Bitwise left shift operator. Left shift inserts zero + bit(s) at the right. + ++ "n++" increments the variable n. + % modulo operator: a % b is the remainder of a divided by b. + + #define BASE 65521 /* largest prime smaller than 65536 */ + + /* + Update a running Adler-32 checksum with the bytes buf[0..len-1] + and return the updated checksum. The Adler-32 checksum should be + initialized to 1. + + Usage example: + + unsigned long adler = 1L; + + while (read_buffer(buffer, length) != EOF) { + adler = update_adler32(adler, buffer, length); + } + if (adler != original_adler) error(); + */ + unsigned long update_adler32(unsigned long adler, + unsigned char *buf, int len) + { + unsigned long s1 = adler & 0xffff; + unsigned long s2 = (adler >> 16) & 0xffff; + int n; + + for (n = 0; n < len; n++) { + s1 = (s1 + buf[n]) % BASE; + s2 = (s2 + s1) % BASE; + } + return (s2 << 16) + s1; + } + + /* Return the adler32 of the bytes buf[0..len-1] */ + + + + +Deutsch & Gailly Informational [Page 10] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + unsigned long adler32(unsigned char *buf, int len) + { + return update_adler32(1L, buf, len); + } + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Deutsch & Gailly Informational [Page 11] + diff --git a/src/SDL2/external/zlib-1.2.8/doc/rfc1951.txt b/src/SDL2/external/zlib-1.2.8/doc/rfc1951.txt new file mode 100644 index 000000000..403c8c722 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/doc/rfc1951.txt @@ -0,0 +1,955 @@ + + + + + + +Network Working Group P. Deutsch +Request for Comments: 1951 Aladdin Enterprises +Category: Informational May 1996 + + + DEFLATE Compressed Data Format Specification version 1.3 + +Status of This Memo + + This memo provides information for the Internet community. This memo + does not specify an Internet standard of any kind. Distribution of + this memo is unlimited. + +IESG Note: + + The IESG takes no position on the validity of any Intellectual + Property Rights statements contained in this document. + +Notices + + Copyright (c) 1996 L. Peter Deutsch + + Permission is granted to copy and distribute this document for any + purpose and without charge, including translations into other + languages and incorporation into compilations, provided that the + copyright notice and this notice are preserved, and that any + substantive changes or deletions from the original are clearly + marked. + + A pointer to the latest version of this and related documentation in + HTML format can be found at the URL + . + +Abstract + + This specification defines a lossless compressed data format that + compresses data using a combination of the LZ77 algorithm and Huffman + coding, with efficiency comparable to the best currently available + general-purpose compression methods. The data can be produced or + consumed, even for an arbitrarily long sequentially presented input + data stream, using only an a priori bounded amount of intermediate + storage. The format can be implemented readily in a manner not + covered by patents. + + + + + + + + +Deutsch Informational [Page 1] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +Table of Contents + + 1. Introduction ................................................... 2 + 1.1. Purpose ................................................... 2 + 1.2. Intended audience ......................................... 3 + 1.3. Scope ..................................................... 3 + 1.4. Compliance ................................................ 3 + 1.5. Definitions of terms and conventions used ................ 3 + 1.6. Changes from previous versions ............................ 4 + 2. Compressed representation overview ............................. 4 + 3. Detailed specification ......................................... 5 + 3.1. Overall conventions ....................................... 5 + 3.1.1. Packing into bytes .................................. 5 + 3.2. Compressed block format ................................... 6 + 3.2.1. Synopsis of prefix and Huffman coding ............... 6 + 3.2.2. Use of Huffman coding in the "deflate" format ....... 7 + 3.2.3. Details of block format ............................. 9 + 3.2.4. Non-compressed blocks (BTYPE=00) ................... 11 + 3.2.5. Compressed blocks (length and distance codes) ...... 11 + 3.2.6. Compression with fixed Huffman codes (BTYPE=01) .... 12 + 3.2.7. Compression with dynamic Huffman codes (BTYPE=10) .. 13 + 3.3. Compliance ............................................... 14 + 4. Compression algorithm details ................................. 14 + 5. References .................................................... 16 + 6. Security Considerations ....................................... 16 + 7. Source code ................................................... 16 + 8. Acknowledgements .............................................. 16 + 9. Author's Address .............................................. 17 + +1. Introduction + + 1.1. Purpose + + The purpose of this specification is to define a lossless + compressed data format that: + * Is independent of CPU type, operating system, file system, + and character set, and hence can be used for interchange; + * Can be produced or consumed, even for an arbitrarily long + sequentially presented input data stream, using only an a + priori bounded amount of intermediate storage, and hence + can be used in data communications or similar structures + such as Unix filters; + * Compresses data with efficiency comparable to the best + currently available general-purpose compression methods, + and in particular considerably better than the "compress" + program; + * Can be implemented readily in a manner not covered by + patents, and hence can be practiced freely; + + + +Deutsch Informational [Page 2] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + * Is compatible with the file format produced by the current + widely used gzip utility, in that conforming decompressors + will be able to read data produced by the existing gzip + compressor. + + The data format defined by this specification does not attempt to: + + * Allow random access to compressed data; + * Compress specialized data (e.g., raster graphics) as well + as the best currently available specialized algorithms. + + A simple counting argument shows that no lossless compression + algorithm can compress every possible input data set. For the + format defined here, the worst case expansion is 5 bytes per 32K- + byte block, i.e., a size increase of 0.015% for large data sets. + English text usually compresses by a factor of 2.5 to 3; + executable files usually compress somewhat less; graphical data + such as raster images may compress much more. + + 1.2. Intended audience + + This specification is intended for use by implementors of software + to compress data into "deflate" format and/or decompress data from + "deflate" format. + + The text of the specification assumes a basic background in + programming at the level of bits and other primitive data + representations. Familiarity with the technique of Huffman coding + is helpful but not required. + + 1.3. Scope + + The specification specifies a method for representing a sequence + of bytes as a (usually shorter) sequence of bits, and a method for + packing the latter bit sequence into bytes. + + 1.4. Compliance + + Unless otherwise indicated below, a compliant decompressor must be + able to accept and decompress any data set that conforms to all + the specifications presented here; a compliant compressor must + produce data sets that conform to all the specifications presented + here. + + 1.5. Definitions of terms and conventions used + + Byte: 8 bits stored or transmitted as a unit (same as an octet). + For this specification, a byte is exactly 8 bits, even on machines + + + +Deutsch Informational [Page 3] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + which store a character on a number of bits different from eight. + See below, for the numbering of bits within a byte. + + String: a sequence of arbitrary bytes. + + 1.6. Changes from previous versions + + There have been no technical changes to the deflate format since + version 1.1 of this specification. In version 1.2, some + terminology was changed. Version 1.3 is a conversion of the + specification to RFC style. + +2. Compressed representation overview + + A compressed data set consists of a series of blocks, corresponding + to successive blocks of input data. The block sizes are arbitrary, + except that non-compressible blocks are limited to 65,535 bytes. + + Each block is compressed using a combination of the LZ77 algorithm + and Huffman coding. The Huffman trees for each block are independent + of those for previous or subsequent blocks; the LZ77 algorithm may + use a reference to a duplicated string occurring in a previous block, + up to 32K input bytes before. + + Each block consists of two parts: a pair of Huffman code trees that + describe the representation of the compressed data part, and a + compressed data part. (The Huffman trees themselves are compressed + using Huffman encoding.) The compressed data consists of a series of + elements of two types: literal bytes (of strings that have not been + detected as duplicated within the previous 32K input bytes), and + pointers to duplicated strings, where a pointer is represented as a + pair . The representation used in the + "deflate" format limits distances to 32K bytes and lengths to 258 + bytes, but does not limit the size of a block, except for + uncompressible blocks, which are limited as noted above. + + Each type of value (literals, distances, and lengths) in the + compressed data is represented using a Huffman code, using one code + tree for literals and lengths and a separate code tree for distances. + The code trees for each block appear in a compact form just before + the compressed data for that block. + + + + + + + + + + +Deutsch Informational [Page 4] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +3. Detailed specification + + 3.1. Overall conventions In the diagrams below, a box like this: + + +---+ + | | <-- the vertical bars might be missing + +---+ + + represents one byte; a box like this: + + +==============+ + | | + +==============+ + + represents a variable number of bytes. + + Bytes stored within a computer do not have a "bit order", since + they are always treated as a unit. However, a byte considered as + an integer between 0 and 255 does have a most- and least- + significant bit, and since we write numbers with the most- + significant digit on the left, we also write bytes with the most- + significant bit on the left. In the diagrams below, we number the + bits of a byte so that bit 0 is the least-significant bit, i.e., + the bits are numbered: + + +--------+ + |76543210| + +--------+ + + Within a computer, a number may occupy multiple bytes. All + multi-byte numbers in the format described here are stored with + the least-significant byte first (at the lower memory address). + For example, the decimal number 520 is stored as: + + 0 1 + +--------+--------+ + |00001000|00000010| + +--------+--------+ + ^ ^ + | | + | + more significant byte = 2 x 256 + + less significant byte = 8 + + 3.1.1. Packing into bytes + + This document does not address the issue of the order in which + bits of a byte are transmitted on a bit-sequential medium, + since the final data format described here is byte- rather than + + + +Deutsch Informational [Page 5] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + bit-oriented. However, we describe the compressed block format + in below, as a sequence of data elements of various bit + lengths, not a sequence of bytes. We must therefore specify + how to pack these data elements into bytes to form the final + compressed byte sequence: + + * Data elements are packed into bytes in order of + increasing bit number within the byte, i.e., starting + with the least-significant bit of the byte. + * Data elements other than Huffman codes are packed + starting with the least-significant bit of the data + element. + * Huffman codes are packed starting with the most- + significant bit of the code. + + In other words, if one were to print out the compressed data as + a sequence of bytes, starting with the first byte at the + *right* margin and proceeding to the *left*, with the most- + significant bit of each byte on the left as usual, one would be + able to parse the result from right to left, with fixed-width + elements in the correct MSB-to-LSB order and Huffman codes in + bit-reversed order (i.e., with the first bit of the code in the + relative LSB position). + + 3.2. Compressed block format + + 3.2.1. Synopsis of prefix and Huffman coding + + Prefix coding represents symbols from an a priori known + alphabet by bit sequences (codes), one code for each symbol, in + a manner such that different symbols may be represented by bit + sequences of different lengths, but a parser can always parse + an encoded string unambiguously symbol-by-symbol. + + We define a prefix code in terms of a binary tree in which the + two edges descending from each non-leaf node are labeled 0 and + 1 and in which the leaf nodes correspond one-for-one with (are + labeled with) the symbols of the alphabet; then the code for a + symbol is the sequence of 0's and 1's on the edges leading from + the root to the leaf labeled with that symbol. For example: + + + + + + + + + + + +Deutsch Informational [Page 6] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + /\ Symbol Code + 0 1 ------ ---- + / \ A 00 + /\ B B 1 + 0 1 C 011 + / \ D 010 + A /\ + 0 1 + / \ + D C + + A parser can decode the next symbol from an encoded input + stream by walking down the tree from the root, at each step + choosing the edge corresponding to the next input bit. + + Given an alphabet with known symbol frequencies, the Huffman + algorithm allows the construction of an optimal prefix code + (one which represents strings with those symbol frequencies + using the fewest bits of any possible prefix codes for that + alphabet). Such a code is called a Huffman code. (See + reference [1] in Chapter 5, references for additional + information on Huffman codes.) + + Note that in the "deflate" format, the Huffman codes for the + various alphabets must not exceed certain maximum code lengths. + This constraint complicates the algorithm for computing code + lengths from symbol frequencies. Again, see Chapter 5, + references for details. + + 3.2.2. Use of Huffman coding in the "deflate" format + + The Huffman codes used for each alphabet in the "deflate" + format have two additional rules: + + * All codes of a given bit length have lexicographically + consecutive values, in the same order as the symbols + they represent; + + * Shorter codes lexicographically precede longer codes. + + + + + + + + + + + + +Deutsch Informational [Page 7] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + We could recode the example above to follow this rule as + follows, assuming that the order of the alphabet is ABCD: + + Symbol Code + ------ ---- + A 10 + B 0 + C 110 + D 111 + + I.e., 0 precedes 10 which precedes 11x, and 110 and 111 are + lexicographically consecutive. + + Given this rule, we can define the Huffman code for an alphabet + just by giving the bit lengths of the codes for each symbol of + the alphabet in order; this is sufficient to determine the + actual codes. In our example, the code is completely defined + by the sequence of bit lengths (2, 1, 3, 3). The following + algorithm generates the codes as integers, intended to be read + from most- to least-significant bit. The code lengths are + initially in tree[I].Len; the codes are produced in + tree[I].Code. + + 1) Count the number of codes for each code length. Let + bl_count[N] be the number of codes of length N, N >= 1. + + 2) Find the numerical value of the smallest code for each + code length: + + code = 0; + bl_count[0] = 0; + for (bits = 1; bits <= MAX_BITS; bits++) { + code = (code + bl_count[bits-1]) << 1; + next_code[bits] = code; + } + + 3) Assign numerical values to all codes, using consecutive + values for all codes of the same length with the base + values determined at step 2. Codes that are never used + (which have a bit length of zero) must not be assigned a + value. + + for (n = 0; n <= max_code; n++) { + len = tree[n].Len; + if (len != 0) { + tree[n].Code = next_code[len]; + next_code[len]++; + } + + + +Deutsch Informational [Page 8] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + } + + Example: + + Consider the alphabet ABCDEFGH, with bit lengths (3, 3, 3, 3, + 3, 2, 4, 4). After step 1, we have: + + N bl_count[N] + - ----------- + 2 1 + 3 5 + 4 2 + + Step 2 computes the following next_code values: + + N next_code[N] + - ------------ + 1 0 + 2 0 + 3 2 + 4 14 + + Step 3 produces the following code values: + + Symbol Length Code + ------ ------ ---- + A 3 010 + B 3 011 + C 3 100 + D 3 101 + E 3 110 + F 2 00 + G 4 1110 + H 4 1111 + + 3.2.3. Details of block format + + Each block of compressed data begins with 3 header bits + containing the following data: + + first bit BFINAL + next 2 bits BTYPE + + Note that the header bits do not necessarily begin on a byte + boundary, since a block does not necessarily occupy an integral + number of bytes. + + + + + +Deutsch Informational [Page 9] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + BFINAL is set if and only if this is the last block of the data + set. + + BTYPE specifies how the data are compressed, as follows: + + 00 - no compression + 01 - compressed with fixed Huffman codes + 10 - compressed with dynamic Huffman codes + 11 - reserved (error) + + The only difference between the two compressed cases is how the + Huffman codes for the literal/length and distance alphabets are + defined. + + In all cases, the decoding algorithm for the actual data is as + follows: + + do + read block header from input stream. + if stored with no compression + skip any remaining bits in current partially + processed byte + read LEN and NLEN (see next section) + copy LEN bytes of data to output + otherwise + if compressed with dynamic Huffman codes + read representation of code trees (see + subsection below) + loop (until end of block code recognized) + decode literal/length value from input stream + if value < 256 + copy value (literal byte) to output stream + otherwise + if value = end of block (256) + break from loop + otherwise (value = 257..285) + decode distance from input stream + + move backwards distance bytes in the output + stream, and copy length bytes from this + position to the output stream. + end loop + while not last block + + Note that a duplicated string reference may refer to a string + in a previous block; i.e., the backward distance may cross one + or more block boundaries. However a distance cannot refer past + the beginning of the output stream. (An application using a + + + +Deutsch Informational [Page 10] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + preset dictionary might discard part of the output stream; a + distance can refer to that part of the output stream anyway) + Note also that the referenced string may overlap the current + position; for example, if the last 2 bytes decoded have values + X and Y, a string reference with + adds X,Y,X,Y,X to the output stream. + + We now specify each compression method in turn. + + 3.2.4. Non-compressed blocks (BTYPE=00) + + Any bits of input up to the next byte boundary are ignored. + The rest of the block consists of the following information: + + 0 1 2 3 4... + +---+---+---+---+================================+ + | LEN | NLEN |... LEN bytes of literal data...| + +---+---+---+---+================================+ + + LEN is the number of data bytes in the block. NLEN is the + one's complement of LEN. + + 3.2.5. Compressed blocks (length and distance codes) + + As noted above, encoded data blocks in the "deflate" format + consist of sequences of symbols drawn from three conceptually + distinct alphabets: either literal bytes, from the alphabet of + byte values (0..255), or pairs, + where the length is drawn from (3..258) and the distance is + drawn from (1..32,768). In fact, the literal and length + alphabets are merged into a single alphabet (0..285), where + values 0..255 represent literal bytes, the value 256 indicates + end-of-block, and values 257..285 represent length codes + (possibly in conjunction with extra bits following the symbol + code) as follows: + + + + + + + + + + + + + + + + +Deutsch Informational [Page 11] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + Extra Extra Extra + Code Bits Length(s) Code Bits Lengths Code Bits Length(s) + ---- ---- ------ ---- ---- ------- ---- ---- ------- + 257 0 3 267 1 15,16 277 4 67-82 + 258 0 4 268 1 17,18 278 4 83-98 + 259 0 5 269 2 19-22 279 4 99-114 + 260 0 6 270 2 23-26 280 4 115-130 + 261 0 7 271 2 27-30 281 5 131-162 + 262 0 8 272 2 31-34 282 5 163-194 + 263 0 9 273 3 35-42 283 5 195-226 + 264 0 10 274 3 43-50 284 5 227-257 + 265 1 11,12 275 3 51-58 285 0 258 + 266 1 13,14 276 3 59-66 + + The extra bits should be interpreted as a machine integer + stored with the most-significant bit first, e.g., bits 1110 + represent the value 14. + + Extra Extra Extra + Code Bits Dist Code Bits Dist Code Bits Distance + ---- ---- ---- ---- ---- ------ ---- ---- -------- + 0 0 1 10 4 33-48 20 9 1025-1536 + 1 0 2 11 4 49-64 21 9 1537-2048 + 2 0 3 12 5 65-96 22 10 2049-3072 + 3 0 4 13 5 97-128 23 10 3073-4096 + 4 1 5,6 14 6 129-192 24 11 4097-6144 + 5 1 7,8 15 6 193-256 25 11 6145-8192 + 6 2 9-12 16 7 257-384 26 12 8193-12288 + 7 2 13-16 17 7 385-512 27 12 12289-16384 + 8 3 17-24 18 8 513-768 28 13 16385-24576 + 9 3 25-32 19 8 769-1024 29 13 24577-32768 + + 3.2.6. Compression with fixed Huffman codes (BTYPE=01) + + The Huffman codes for the two alphabets are fixed, and are not + represented explicitly in the data. The Huffman code lengths + for the literal/length alphabet are: + + Lit Value Bits Codes + --------- ---- ----- + 0 - 143 8 00110000 through + 10111111 + 144 - 255 9 110010000 through + 111111111 + 256 - 279 7 0000000 through + 0010111 + 280 - 287 8 11000000 through + 11000111 + + + +Deutsch Informational [Page 12] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + The code lengths are sufficient to generate the actual codes, + as described above; we show the codes in the table for added + clarity. Literal/length values 286-287 will never actually + occur in the compressed data, but participate in the code + construction. + + Distance codes 0-31 are represented by (fixed-length) 5-bit + codes, with possible additional bits as shown in the table + shown in Paragraph 3.2.5, above. Note that distance codes 30- + 31 will never actually occur in the compressed data. + + 3.2.7. Compression with dynamic Huffman codes (BTYPE=10) + + The Huffman codes for the two alphabets appear in the block + immediately after the header bits and before the actual + compressed data, first the literal/length code and then the + distance code. Each code is defined by a sequence of code + lengths, as discussed in Paragraph 3.2.2, above. For even + greater compactness, the code length sequences themselves are + compressed using a Huffman code. The alphabet for code lengths + is as follows: + + 0 - 15: Represent code lengths of 0 - 15 + 16: Copy the previous code length 3 - 6 times. + The next 2 bits indicate repeat length + (0 = 3, ... , 3 = 6) + Example: Codes 8, 16 (+2 bits 11), + 16 (+2 bits 10) will expand to + 12 code lengths of 8 (1 + 6 + 5) + 17: Repeat a code length of 0 for 3 - 10 times. + (3 bits of length) + 18: Repeat a code length of 0 for 11 - 138 times + (7 bits of length) + + A code length of 0 indicates that the corresponding symbol in + the literal/length or distance alphabet will not occur in the + block, and should not participate in the Huffman code + construction algorithm given earlier. If only one distance + code is used, it is encoded using one bit, not zero bits; in + this case there is a single code length of one, with one unused + code. One distance code of zero bits means that there are no + distance codes used at all (the data is all literals). + + We can now define the format of the block: + + 5 Bits: HLIT, # of Literal/Length codes - 257 (257 - 286) + 5 Bits: HDIST, # of Distance codes - 1 (1 - 32) + 4 Bits: HCLEN, # of Code Length codes - 4 (4 - 19) + + + +Deutsch Informational [Page 13] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + (HCLEN + 4) x 3 bits: code lengths for the code length + alphabet given just above, in the order: 16, 17, 18, + 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 + + These code lengths are interpreted as 3-bit integers + (0-7); as above, a code length of 0 means the + corresponding symbol (literal/length or distance code + length) is not used. + + HLIT + 257 code lengths for the literal/length alphabet, + encoded using the code length Huffman code + + HDIST + 1 code lengths for the distance alphabet, + encoded using the code length Huffman code + + The actual compressed data of the block, + encoded using the literal/length and distance Huffman + codes + + The literal/length symbol 256 (end of data), + encoded using the literal/length Huffman code + + The code length repeat codes can cross from HLIT + 257 to the + HDIST + 1 code lengths. In other words, all code lengths form + a single sequence of HLIT + HDIST + 258 values. + + 3.3. Compliance + + A compressor may limit further the ranges of values specified in + the previous section and still be compliant; for example, it may + limit the range of backward pointers to some value smaller than + 32K. Similarly, a compressor may limit the size of blocks so that + a compressible block fits in memory. + + A compliant decompressor must accept the full range of possible + values defined in the previous section, and must accept blocks of + arbitrary size. + +4. Compression algorithm details + + While it is the intent of this document to define the "deflate" + compressed data format without reference to any particular + compression algorithm, the format is related to the compressed + formats produced by LZ77 (Lempel-Ziv 1977, see reference [2] below); + since many variations of LZ77 are patented, it is strongly + recommended that the implementor of a compressor follow the general + algorithm presented here, which is known not to be patented per se. + The material in this section is not part of the definition of the + + + +Deutsch Informational [Page 14] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + specification per se, and a compressor need not follow it in order to + be compliant. + + The compressor terminates a block when it determines that starting a + new block with fresh trees would be useful, or when the block size + fills up the compressor's block buffer. + + The compressor uses a chained hash table to find duplicated strings, + using a hash function that operates on 3-byte sequences. At any + given point during compression, let XYZ be the next 3 input bytes to + be examined (not necessarily all different, of course). First, the + compressor examines the hash chain for XYZ. If the chain is empty, + the compressor simply writes out X as a literal byte and advances one + byte in the input. If the hash chain is not empty, indicating that + the sequence XYZ (or, if we are unlucky, some other 3 bytes with the + same hash function value) has occurred recently, the compressor + compares all strings on the XYZ hash chain with the actual input data + sequence starting at the current point, and selects the longest + match. + + The compressor searches the hash chains starting with the most recent + strings, to favor small distances and thus take advantage of the + Huffman encoding. The hash chains are singly linked. There are no + deletions from the hash chains; the algorithm simply discards matches + that are too old. To avoid a worst-case situation, very long hash + chains are arbitrarily truncated at a certain length, determined by a + run-time parameter. + + To improve overall compression, the compressor optionally defers the + selection of matches ("lazy matching"): after a match of length N has + been found, the compressor searches for a longer match starting at + the next input byte. If it finds a longer match, it truncates the + previous match to a length of one (thus producing a single literal + byte) and then emits the longer match. Otherwise, it emits the + original match, and, as described above, advances N bytes before + continuing. + + Run-time parameters also control this "lazy match" procedure. If + compression ratio is most important, the compressor attempts a + complete second search regardless of the length of the first match. + In the normal case, if the current match is "long enough", the + compressor reduces the search for a longer match, thus speeding up + the process. If speed is most important, the compressor inserts new + strings in the hash table only when no match was found, or when the + match is not "too long". This degrades the compression ratio but + saves time since there are both fewer insertions and fewer searches. + + + + + +Deutsch Informational [Page 15] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +5. References + + [1] Huffman, D. A., "A Method for the Construction of Minimum + Redundancy Codes", Proceedings of the Institute of Radio + Engineers, September 1952, Volume 40, Number 9, pp. 1098-1101. + + [2] Ziv J., Lempel A., "A Universal Algorithm for Sequential Data + Compression", IEEE Transactions on Information Theory, Vol. 23, + No. 3, pp. 337-343. + + [3] Gailly, J.-L., and Adler, M., ZLIB documentation and sources, + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [4] Gailly, J.-L., and Adler, M., GZIP documentation and sources, + available as gzip-*.tar in ftp://prep.ai.mit.edu/pub/gnu/ + + [5] Schwartz, E. S., and Kallick, B. "Generating a canonical prefix + encoding." Comm. ACM, 7,3 (Mar. 1964), pp. 166-169. + + [6] Hirschberg and Lelewer, "Efficient decoding of prefix codes," + Comm. ACM, 33,4, April 1990, pp. 449-459. + +6. Security Considerations + + Any data compression method involves the reduction of redundancy in + the data. Consequently, any corruption of the data is likely to have + severe effects and be difficult to correct. Uncompressed text, on + the other hand, will probably still be readable despite the presence + of some corrupted bytes. + + It is recommended that systems using this data format provide some + means of validating the integrity of the compressed data. See + reference [3], for example. + +7. Source code + + Source code for a C language implementation of a "deflate" compliant + compressor and decompressor is available within the zlib package at + ftp://ftp.uu.net/pub/archiving/zip/zlib/. + +8. Acknowledgements + + Trademarks cited in this document are the property of their + respective owners. + + Phil Katz designed the deflate format. Jean-Loup Gailly and Mark + Adler wrote the related software described in this specification. + Glenn Randers-Pehrson converted this document to RFC and HTML format. + + + +Deutsch Informational [Page 16] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +9. Author's Address + + L. Peter Deutsch + Aladdin Enterprises + 203 Santa Margarita Ave. + Menlo Park, CA 94025 + + Phone: (415) 322-0103 (AM only) + FAX: (415) 322-1734 + EMail: + + Questions about the technical content of this specification can be + sent by email to: + + Jean-Loup Gailly and + Mark Adler + + Editorial comments on this specification can be sent by email to: + + L. Peter Deutsch and + Glenn Randers-Pehrson + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Deutsch Informational [Page 17] + diff --git a/src/SDL2/external/zlib-1.2.8/doc/rfc1952.txt b/src/SDL2/external/zlib-1.2.8/doc/rfc1952.txt new file mode 100644 index 000000000..a8e51b456 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/doc/rfc1952.txt @@ -0,0 +1,675 @@ + + + + + + +Network Working Group P. Deutsch +Request for Comments: 1952 Aladdin Enterprises +Category: Informational May 1996 + + + GZIP file format specification version 4.3 + +Status of This Memo + + This memo provides information for the Internet community. This memo + does not specify an Internet standard of any kind. Distribution of + this memo is unlimited. + +IESG Note: + + The IESG takes no position on the validity of any Intellectual + Property Rights statements contained in this document. + +Notices + + Copyright (c) 1996 L. Peter Deutsch + + Permission is granted to copy and distribute this document for any + purpose and without charge, including translations into other + languages and incorporation into compilations, provided that the + copyright notice and this notice are preserved, and that any + substantive changes or deletions from the original are clearly + marked. + + A pointer to the latest version of this and related documentation in + HTML format can be found at the URL + . + +Abstract + + This specification defines a lossless compressed data format that is + compatible with the widely used GZIP utility. The format includes a + cyclic redundancy check value for detecting data corruption. The + format presently uses the DEFLATE method of compression but can be + easily extended to use other compression methods. The format can be + implemented readily in a manner not covered by patents. + + + + + + + + + + +Deutsch Informational [Page 1] + +RFC 1952 GZIP File Format Specification May 1996 + + +Table of Contents + + 1. Introduction ................................................... 2 + 1.1. Purpose ................................................... 2 + 1.2. Intended audience ......................................... 3 + 1.3. Scope ..................................................... 3 + 1.4. Compliance ................................................ 3 + 1.5. Definitions of terms and conventions used ................. 3 + 1.6. Changes from previous versions ............................ 3 + 2. Detailed specification ......................................... 4 + 2.1. Overall conventions ....................................... 4 + 2.2. File format ............................................... 5 + 2.3. Member format ............................................. 5 + 2.3.1. Member header and trailer ........................... 6 + 2.3.1.1. Extra field ................................... 8 + 2.3.1.2. Compliance .................................... 9 + 3. References .................................................. 9 + 4. Security Considerations .................................... 10 + 5. Acknowledgements ........................................... 10 + 6. Author's Address ........................................... 10 + 7. Appendix: Jean-Loup Gailly's gzip utility .................. 11 + 8. Appendix: Sample CRC Code .................................. 11 + +1. Introduction + + 1.1. Purpose + + The purpose of this specification is to define a lossless + compressed data format that: + + * Is independent of CPU type, operating system, file system, + and character set, and hence can be used for interchange; + * Can compress or decompress a data stream (as opposed to a + randomly accessible file) to produce another data stream, + using only an a priori bounded amount of intermediate + storage, and hence can be used in data communications or + similar structures such as Unix filters; + * Compresses data with efficiency comparable to the best + currently available general-purpose compression methods, + and in particular considerably better than the "compress" + program; + * Can be implemented readily in a manner not covered by + patents, and hence can be practiced freely; + * Is compatible with the file format produced by the current + widely used gzip utility, in that conforming decompressors + will be able to read data produced by the existing gzip + compressor. + + + + +Deutsch Informational [Page 2] + +RFC 1952 GZIP File Format Specification May 1996 + + + The data format defined by this specification does not attempt to: + + * Provide random access to compressed data; + * Compress specialized data (e.g., raster graphics) as well as + the best currently available specialized algorithms. + + 1.2. Intended audience + + This specification is intended for use by implementors of software + to compress data into gzip format and/or decompress data from gzip + format. + + The text of the specification assumes a basic background in + programming at the level of bits and other primitive data + representations. + + 1.3. Scope + + The specification specifies a compression method and a file format + (the latter assuming only that a file can store a sequence of + arbitrary bytes). It does not specify any particular interface to + a file system or anything about character sets or encodings + (except for file names and comments, which are optional). + + 1.4. Compliance + + Unless otherwise indicated below, a compliant decompressor must be + able to accept and decompress any file that conforms to all the + specifications presented here; a compliant compressor must produce + files that conform to all the specifications presented here. The + material in the appendices is not part of the specification per se + and is not relevant to compliance. + + 1.5. Definitions of terms and conventions used + + byte: 8 bits stored or transmitted as a unit (same as an octet). + (For this specification, a byte is exactly 8 bits, even on + machines which store a character on a number of bits different + from 8.) See below for the numbering of bits within a byte. + + 1.6. Changes from previous versions + + There have been no technical changes to the gzip format since + version 4.1 of this specification. In version 4.2, some + terminology was changed, and the sample CRC code was rewritten for + clarity and to eliminate the requirement for the caller to do pre- + and post-conditioning. Version 4.3 is a conversion of the + specification to RFC style. + + + +Deutsch Informational [Page 3] + +RFC 1952 GZIP File Format Specification May 1996 + + +2. Detailed specification + + 2.1. Overall conventions + + In the diagrams below, a box like this: + + +---+ + | | <-- the vertical bars might be missing + +---+ + + represents one byte; a box like this: + + +==============+ + | | + +==============+ + + represents a variable number of bytes. + + Bytes stored within a computer do not have a "bit order", since + they are always treated as a unit. However, a byte considered as + an integer between 0 and 255 does have a most- and least- + significant bit, and since we write numbers with the most- + significant digit on the left, we also write bytes with the most- + significant bit on the left. In the diagrams below, we number the + bits of a byte so that bit 0 is the least-significant bit, i.e., + the bits are numbered: + + +--------+ + |76543210| + +--------+ + + This document does not address the issue of the order in which + bits of a byte are transmitted on a bit-sequential medium, since + the data format described here is byte- rather than bit-oriented. + + Within a computer, a number may occupy multiple bytes. All + multi-byte numbers in the format described here are stored with + the least-significant byte first (at the lower memory address). + For example, the decimal number 520 is stored as: + + 0 1 + +--------+--------+ + |00001000|00000010| + +--------+--------+ + ^ ^ + | | + | + more significant byte = 2 x 256 + + less significant byte = 8 + + + +Deutsch Informational [Page 4] + +RFC 1952 GZIP File Format Specification May 1996 + + + 2.2. File format + + A gzip file consists of a series of "members" (compressed data + sets). The format of each member is specified in the following + section. The members simply appear one after another in the file, + with no additional information before, between, or after them. + + 2.3. Member format + + Each member has the following structure: + + +---+---+---+---+---+---+---+---+---+---+ + |ID1|ID2|CM |FLG| MTIME |XFL|OS | (more-->) + +---+---+---+---+---+---+---+---+---+---+ + + (if FLG.FEXTRA set) + + +---+---+=================================+ + | XLEN |...XLEN bytes of "extra field"...| (more-->) + +---+---+=================================+ + + (if FLG.FNAME set) + + +=========================================+ + |...original file name, zero-terminated...| (more-->) + +=========================================+ + + (if FLG.FCOMMENT set) + + +===================================+ + |...file comment, zero-terminated...| (more-->) + +===================================+ + + (if FLG.FHCRC set) + + +---+---+ + | CRC16 | + +---+---+ + + +=======================+ + |...compressed blocks...| (more-->) + +=======================+ + + 0 1 2 3 4 5 6 7 + +---+---+---+---+---+---+---+---+ + | CRC32 | ISIZE | + +---+---+---+---+---+---+---+---+ + + + + +Deutsch Informational [Page 5] + +RFC 1952 GZIP File Format Specification May 1996 + + + 2.3.1. Member header and trailer + + ID1 (IDentification 1) + ID2 (IDentification 2) + These have the fixed values ID1 = 31 (0x1f, \037), ID2 = 139 + (0x8b, \213), to identify the file as being in gzip format. + + CM (Compression Method) + This identifies the compression method used in the file. CM + = 0-7 are reserved. CM = 8 denotes the "deflate" + compression method, which is the one customarily used by + gzip and which is documented elsewhere. + + FLG (FLaGs) + This flag byte is divided into individual bits as follows: + + bit 0 FTEXT + bit 1 FHCRC + bit 2 FEXTRA + bit 3 FNAME + bit 4 FCOMMENT + bit 5 reserved + bit 6 reserved + bit 7 reserved + + If FTEXT is set, the file is probably ASCII text. This is + an optional indication, which the compressor may set by + checking a small amount of the input data to see whether any + non-ASCII characters are present. In case of doubt, FTEXT + is cleared, indicating binary data. For systems which have + different file formats for ascii text and binary data, the + decompressor can use FTEXT to choose the appropriate format. + We deliberately do not specify the algorithm used to set + this bit, since a compressor always has the option of + leaving it cleared and a decompressor always has the option + of ignoring it and letting some other program handle issues + of data conversion. + + If FHCRC is set, a CRC16 for the gzip header is present, + immediately before the compressed data. The CRC16 consists + of the two least significant bytes of the CRC32 for all + bytes of the gzip header up to and not including the CRC16. + [The FHCRC bit was never set by versions of gzip up to + 1.2.4, even though it was documented with a different + meaning in gzip 1.2.4.] + + If FEXTRA is set, optional extra fields are present, as + described in a following section. + + + +Deutsch Informational [Page 6] + +RFC 1952 GZIP File Format Specification May 1996 + + + If FNAME is set, an original file name is present, + terminated by a zero byte. The name must consist of ISO + 8859-1 (LATIN-1) characters; on operating systems using + EBCDIC or any other character set for file names, the name + must be translated to the ISO LATIN-1 character set. This + is the original name of the file being compressed, with any + directory components removed, and, if the file being + compressed is on a file system with case insensitive names, + forced to lower case. There is no original file name if the + data was compressed from a source other than a named file; + for example, if the source was stdin on a Unix system, there + is no file name. + + If FCOMMENT is set, a zero-terminated file comment is + present. This comment is not interpreted; it is only + intended for human consumption. The comment must consist of + ISO 8859-1 (LATIN-1) characters. Line breaks should be + denoted by a single line feed character (10 decimal). + + Reserved FLG bits must be zero. + + MTIME (Modification TIME) + This gives the most recent modification time of the original + file being compressed. The time is in Unix format, i.e., + seconds since 00:00:00 GMT, Jan. 1, 1970. (Note that this + may cause problems for MS-DOS and other systems that use + local rather than Universal time.) If the compressed data + did not come from a file, MTIME is set to the time at which + compression started. MTIME = 0 means no time stamp is + available. + + XFL (eXtra FLags) + These flags are available for use by specific compression + methods. The "deflate" method (CM = 8) sets these flags as + follows: + + XFL = 2 - compressor used maximum compression, + slowest algorithm + XFL = 4 - compressor used fastest algorithm + + OS (Operating System) + This identifies the type of file system on which compression + took place. This may be useful in determining end-of-line + convention for text files. The currently defined values are + as follows: + + + + + + +Deutsch Informational [Page 7] + +RFC 1952 GZIP File Format Specification May 1996 + + + 0 - FAT filesystem (MS-DOS, OS/2, NT/Win32) + 1 - Amiga + 2 - VMS (or OpenVMS) + 3 - Unix + 4 - VM/CMS + 5 - Atari TOS + 6 - HPFS filesystem (OS/2, NT) + 7 - Macintosh + 8 - Z-System + 9 - CP/M + 10 - TOPS-20 + 11 - NTFS filesystem (NT) + 12 - QDOS + 13 - Acorn RISCOS + 255 - unknown + + XLEN (eXtra LENgth) + If FLG.FEXTRA is set, this gives the length of the optional + extra field. See below for details. + + CRC32 (CRC-32) + This contains a Cyclic Redundancy Check value of the + uncompressed data computed according to CRC-32 algorithm + used in the ISO 3309 standard and in section 8.1.1.6.2 of + ITU-T recommendation V.42. (See http://www.iso.ch for + ordering ISO documents. See gopher://info.itu.ch for an + online version of ITU-T V.42.) + + ISIZE (Input SIZE) + This contains the size of the original (uncompressed) input + data modulo 2^32. + + 2.3.1.1. Extra field + + If the FLG.FEXTRA bit is set, an "extra field" is present in + the header, with total length XLEN bytes. It consists of a + series of subfields, each of the form: + + +---+---+---+---+==================================+ + |SI1|SI2| LEN |... LEN bytes of subfield data ...| + +---+---+---+---+==================================+ + + SI1 and SI2 provide a subfield ID, typically two ASCII letters + with some mnemonic value. Jean-Loup Gailly + is maintaining a registry of subfield + IDs; please send him any subfield ID you wish to use. Subfield + IDs with SI2 = 0 are reserved for future use. The following + IDs are currently defined: + + + +Deutsch Informational [Page 8] + +RFC 1952 GZIP File Format Specification May 1996 + + + SI1 SI2 Data + ---------- ---------- ---- + 0x41 ('A') 0x70 ('P') Apollo file type information + + LEN gives the length of the subfield data, excluding the 4 + initial bytes. + + 2.3.1.2. Compliance + + A compliant compressor must produce files with correct ID1, + ID2, CM, CRC32, and ISIZE, but may set all the other fields in + the fixed-length part of the header to default values (255 for + OS, 0 for all others). The compressor must set all reserved + bits to zero. + + A compliant decompressor must check ID1, ID2, and CM, and + provide an error indication if any of these have incorrect + values. It must examine FEXTRA/XLEN, FNAME, FCOMMENT and FHCRC + at least so it can skip over the optional fields if they are + present. It need not examine any other part of the header or + trailer; in particular, a decompressor may ignore FTEXT and OS + and always produce binary output, and still be compliant. A + compliant decompressor must give an error indication if any + reserved bit is non-zero, since such a bit could indicate the + presence of a new field that would cause subsequent data to be + interpreted incorrectly. + +3. References + + [1] "Information Processing - 8-bit single-byte coded graphic + character sets - Part 1: Latin alphabet No.1" (ISO 8859-1:1987). + The ISO 8859-1 (Latin-1) character set is a superset of 7-bit + ASCII. Files defining this character set are available as + iso_8859-1.* in ftp://ftp.uu.net/graphics/png/documents/ + + [2] ISO 3309 + + [3] ITU-T recommendation V.42 + + [4] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification", + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [5] Gailly, J.-L., GZIP documentation, available as gzip-*.tar in + ftp://prep.ai.mit.edu/pub/gnu/ + + [6] Sarwate, D.V., "Computation of Cyclic Redundancy Checks via Table + Look-Up", Communications of the ACM, 31(8), pp.1008-1013. + + + + +Deutsch Informational [Page 9] + +RFC 1952 GZIP File Format Specification May 1996 + + + [7] Schwaderer, W.D., "CRC Calculation", April 85 PC Tech Journal, + pp.118-133. + + [8] ftp://ftp.adelaide.edu.au/pub/rocksoft/papers/crc_v3.txt, + describing the CRC concept. + +4. Security Considerations + + Any data compression method involves the reduction of redundancy in + the data. Consequently, any corruption of the data is likely to have + severe effects and be difficult to correct. Uncompressed text, on + the other hand, will probably still be readable despite the presence + of some corrupted bytes. + + It is recommended that systems using this data format provide some + means of validating the integrity of the compressed data, such as by + setting and checking the CRC-32 check value. + +5. Acknowledgements + + Trademarks cited in this document are the property of their + respective owners. + + Jean-Loup Gailly designed the gzip format and wrote, with Mark Adler, + the related software described in this specification. Glenn + Randers-Pehrson converted this document to RFC and HTML format. + +6. Author's Address + + L. Peter Deutsch + Aladdin Enterprises + 203 Santa Margarita Ave. + Menlo Park, CA 94025 + + Phone: (415) 322-0103 (AM only) + FAX: (415) 322-1734 + EMail: + + Questions about the technical content of this specification can be + sent by email to: + + Jean-Loup Gailly and + Mark Adler + + Editorial comments on this specification can be sent by email to: + + L. Peter Deutsch and + Glenn Randers-Pehrson + + + +Deutsch Informational [Page 10] + +RFC 1952 GZIP File Format Specification May 1996 + + +7. Appendix: Jean-Loup Gailly's gzip utility + + The most widely used implementation of gzip compression, and the + original documentation on which this specification is based, were + created by Jean-Loup Gailly . Since this + implementation is a de facto standard, we mention some more of its + features here. Again, the material in this section is not part of + the specification per se, and implementations need not follow it to + be compliant. + + When compressing or decompressing a file, gzip preserves the + protection, ownership, and modification time attributes on the local + file system, since there is no provision for representing protection + attributes in the gzip file format itself. Since the file format + includes a modification time, the gzip decompressor provides a + command line switch that assigns the modification time from the file, + rather than the local modification time of the compressed input, to + the decompressed output. + +8. Appendix: Sample CRC Code + + The following sample code represents a practical implementation of + the CRC (Cyclic Redundancy Check). (See also ISO 3309 and ITU-T V.42 + for a formal specification.) + + The sample code is in the ANSI C programming language. Non C users + may find it easier to read with these hints: + + & Bitwise AND operator. + ^ Bitwise exclusive-OR operator. + >> Bitwise right shift operator. When applied to an + unsigned quantity, as here, right shift inserts zero + bit(s) at the left. + ! Logical NOT operator. + ++ "n++" increments the variable n. + 0xNNN 0x introduces a hexadecimal (base 16) constant. + Suffix L indicates a long value (at least 32 bits). + + /* Table of CRCs of all 8-bit messages. */ + unsigned long crc_table[256]; + + /* Flag: has the table been computed? Initially false. */ + int crc_table_computed = 0; + + /* Make the table for a fast CRC. */ + void make_crc_table(void) + { + unsigned long c; + + + +Deutsch Informational [Page 11] + +RFC 1952 GZIP File Format Specification May 1996 + + + int n, k; + for (n = 0; n < 256; n++) { + c = (unsigned long) n; + for (k = 0; k < 8; k++) { + if (c & 1) { + c = 0xedb88320L ^ (c >> 1); + } else { + c = c >> 1; + } + } + crc_table[n] = c; + } + crc_table_computed = 1; + } + + /* + Update a running crc with the bytes buf[0..len-1] and return + the updated crc. The crc should be initialized to zero. Pre- and + post-conditioning (one's complement) is performed within this + function so it shouldn't be done by the caller. Usage example: + + unsigned long crc = 0L; + + while (read_buffer(buffer, length) != EOF) { + crc = update_crc(crc, buffer, length); + } + if (crc != original_crc) error(); + */ + unsigned long update_crc(unsigned long crc, + unsigned char *buf, int len) + { + unsigned long c = crc ^ 0xffffffffL; + int n; + + if (!crc_table_computed) + make_crc_table(); + for (n = 0; n < len; n++) { + c = crc_table[(c ^ buf[n]) & 0xff] ^ (c >> 8); + } + return c ^ 0xffffffffL; + } + + /* Return the CRC of the bytes buf[0..len-1]. */ + unsigned long crc(unsigned char *buf, int len) + { + return update_crc(0L, buf, len); + } + + + + +Deutsch Informational [Page 12] + diff --git a/src/SDL2/external/zlib-1.2.8/doc/txtvsbin.txt b/src/SDL2/external/zlib-1.2.8/doc/txtvsbin.txt new file mode 100644 index 000000000..3d0f0634f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/doc/txtvsbin.txt @@ -0,0 +1,107 @@ +A Fast Method for Identifying Plain Text Files +============================================== + + +Introduction +------------ + +Given a file coming from an unknown source, it is sometimes desirable +to find out whether the format of that file is plain text. Although +this may appear like a simple task, a fully accurate detection of the +file type requires heavy-duty semantic analysis on the file contents. +It is, however, possible to obtain satisfactory results by employing +various heuristics. + +Previous versions of PKZip and other zip-compatible compression tools +were using a crude detection scheme: if more than 80% (4/5) of the bytes +found in a certain buffer are within the range [7..127], the file is +labeled as plain text, otherwise it is labeled as binary. A prominent +limitation of this scheme is the restriction to Latin-based alphabets. +Other alphabets, like Greek, Cyrillic or Asian, make extensive use of +the bytes within the range [128..255], and texts using these alphabets +are most often misidentified by this scheme; in other words, the rate +of false negatives is sometimes too high, which means that the recall +is low. Another weakness of this scheme is a reduced precision, due to +the false positives that may occur when binary files containing large +amounts of textual characters are misidentified as plain text. + +In this article we propose a new, simple detection scheme that features +a much increased precision and a near-100% recall. This scheme is +designed to work on ASCII, Unicode and other ASCII-derived alphabets, +and it handles single-byte encodings (ISO-8859, MacRoman, KOI8, etc.) +and variable-sized encodings (ISO-2022, UTF-8, etc.). Wider encodings +(UCS-2/UTF-16 and UCS-4/UTF-32) are not handled, however. + + +The Algorithm +------------- + +The algorithm works by dividing the set of bytecodes [0..255] into three +categories: +- The white list of textual bytecodes: + 9 (TAB), 10 (LF), 13 (CR), 32 (SPACE) to 255. +- The gray list of tolerated bytecodes: + 7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB), 27 (ESC). +- The black list of undesired, non-textual bytecodes: + 0 (NUL) to 6, 14 to 31. + +If a file contains at least one byte that belongs to the white list and +no byte that belongs to the black list, then the file is categorized as +plain text; otherwise, it is categorized as binary. (The boundary case, +when the file is empty, automatically falls into the latter category.) + + +Rationale +--------- + +The idea behind this algorithm relies on two observations. + +The first observation is that, although the full range of 7-bit codes +[0..127] is properly specified by the ASCII standard, most control +characters in the range [0..31] are not used in practice. The only +widely-used, almost universally-portable control codes are 9 (TAB), +10 (LF) and 13 (CR). There are a few more control codes that are +recognized on a reduced range of platforms and text viewers/editors: +7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB) and 27 (ESC); but these +codes are rarely (if ever) used alone, without being accompanied by +some printable text. Even the newer, portable text formats such as +XML avoid using control characters outside the list mentioned here. + +The second observation is that most of the binary files tend to contain +control characters, especially 0 (NUL). Even though the older text +detection schemes observe the presence of non-ASCII codes from the range +[128..255], the precision rarely has to suffer if this upper range is +labeled as textual, because the files that are genuinely binary tend to +contain both control characters and codes from the upper range. On the +other hand, the upper range needs to be labeled as textual, because it +is used by virtually all ASCII extensions. In particular, this range is +used for encoding non-Latin scripts. + +Since there is no counting involved, other than simply observing the +presence or the absence of some byte values, the algorithm produces +consistent results, regardless what alphabet encoding is being used. +(If counting were involved, it could be possible to obtain different +results on a text encoded, say, using ISO-8859-16 versus UTF-8.) + +There is an extra category of plain text files that are "polluted" with +one or more black-listed codes, either by mistake or by peculiar design +considerations. In such cases, a scheme that tolerates a small fraction +of black-listed codes would provide an increased recall (i.e. more true +positives). This, however, incurs a reduced precision overall, since +false positives are more likely to appear in binary files that contain +large chunks of textual data. Furthermore, "polluted" plain text should +be regarded as binary by general-purpose text detection schemes, because +general-purpose text processing algorithms might not be applicable. +Under this premise, it is safe to say that our detection method provides +a near-100% recall. + +Experiments have been run on many files coming from various platforms +and applications. We tried plain text files, system logs, source code, +formatted office documents, compiled object code, etc. The results +confirm the optimistic assumptions about the capabilities of this +algorithm. + + +-- +Cosmin Truta +Last updated: 2006-May-28 diff --git a/src/SDL2/external/zlib-1.2.8/examples/README.examples b/src/SDL2/external/zlib-1.2.8/examples/README.examples new file mode 100644 index 000000000..56a31714e --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/examples/README.examples @@ -0,0 +1,49 @@ +This directory contains examples of the use of zlib and other relevant +programs and documentation. + +enough.c + calculation and justification of ENOUGH parameter in inftrees.h + - calculates the maximum table space used in inflate tree + construction over all possible Huffman codes + +fitblk.c + compress just enough input to nearly fill a requested output size + - zlib isn't designed to do this, but fitblk does it anyway + +gun.c + uncompress a gzip file + - illustrates the use of inflateBack() for high speed file-to-file + decompression using call-back functions + - is approximately twice as fast as gzip -d + - also provides Unix uncompress functionality, again twice as fast + +gzappend.c + append to a gzip file + - illustrates the use of the Z_BLOCK flush parameter for inflate() + - illustrates the use of deflatePrime() to start at any bit + +gzjoin.c + join gzip files without recalculating the crc or recompressing + - illustrates the use of the Z_BLOCK flush parameter for inflate() + - illustrates the use of crc32_combine() + +gzlog.c +gzlog.h + efficiently and robustly maintain a message log file in gzip format + - illustrates use of raw deflate, Z_PARTIAL_FLUSH, deflatePrime(), + and deflateSetDictionary() + - illustrates use of a gzip header extra field + +zlib_how.html + painfully comprehensive description of zpipe.c (see below) + - describes in excruciating detail the use of deflate() and inflate() + +zpipe.c + reads and writes zlib streams from stdin to stdout + - illustrates the proper use of deflate() and inflate() + - deeply commented in zlib_how.html (see above) + +zran.c + index a zlib or gzip stream and randomly access it + - illustrates the use of Z_BLOCK, inflatePrime(), and + inflateSetDictionary() to provide random access diff --git a/src/SDL2/external/zlib-1.2.8/examples/enough.c b/src/SDL2/external/zlib-1.2.8/examples/enough.c new file mode 100644 index 000000000..b99114430 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/examples/enough.c @@ -0,0 +1,572 @@ +/* enough.c -- determine the maximum size of inflate's Huffman code tables over + * all possible valid and complete Huffman codes, subject to a length limit. + * Copyright (C) 2007, 2008, 2012 Mark Adler + * Version 1.4 18 August 2012 Mark Adler + */ + +/* Version history: + 1.0 3 Jan 2007 First version (derived from codecount.c version 1.4) + 1.1 4 Jan 2007 Use faster incremental table usage computation + Prune examine() search on previously visited states + 1.2 5 Jan 2007 Comments clean up + As inflate does, decrease root for short codes + Refuse cases where inflate would increase root + 1.3 17 Feb 2008 Add argument for initial root table size + Fix bug for initial root table size == max - 1 + Use a macro to compute the history index + 1.4 18 Aug 2012 Avoid shifts more than bits in type (caused endless loop!) + Clean up comparisons of different types + Clean up code indentation + */ + +/* + Examine all possible Huffman codes for a given number of symbols and a + maximum code length in bits to determine the maximum table size for zilb's + inflate. Only complete Huffman codes are counted. + + Two codes are considered distinct if the vectors of the number of codes per + length are not identical. So permutations of the symbol assignments result + in the same code for the counting, as do permutations of the assignments of + the bit values to the codes (i.e. only canonical codes are counted). + + We build a code from shorter to longer lengths, determining how many symbols + are coded at each length. At each step, we have how many symbols remain to + be coded, what the last code length used was, and how many bit patterns of + that length remain unused. Then we add one to the code length and double the + number of unused patterns to graduate to the next code length. We then + assign all portions of the remaining symbols to that code length that + preserve the properties of a correct and eventually complete code. Those + properties are: we cannot use more bit patterns than are available; and when + all the symbols are used, there are exactly zero possible bit patterns + remaining. + + The inflate Huffman decoding algorithm uses two-level lookup tables for + speed. There is a single first-level table to decode codes up to root bits + in length (root == 9 in the current inflate implementation). The table + has 1 << root entries and is indexed by the next root bits of input. Codes + shorter than root bits have replicated table entries, so that the correct + entry is pointed to regardless of the bits that follow the short code. If + the code is longer than root bits, then the table entry points to a second- + level table. The size of that table is determined by the longest code with + that root-bit prefix. If that longest code has length len, then the table + has size 1 << (len - root), to index the remaining bits in that set of + codes. Each subsequent root-bit prefix then has its own sub-table. The + total number of table entries required by the code is calculated + incrementally as the number of codes at each bit length is populated. When + all of the codes are shorter than root bits, then root is reduced to the + longest code length, resulting in a single, smaller, one-level table. + + The inflate algorithm also provides for small values of root (relative to + the log2 of the number of symbols), where the shortest code has more bits + than root. In that case, root is increased to the length of the shortest + code. This program, by design, does not handle that case, so it is verified + that the number of symbols is less than 2^(root + 1). + + In order to speed up the examination (by about ten orders of magnitude for + the default arguments), the intermediate states in the build-up of a code + are remembered and previously visited branches are pruned. The memory + required for this will increase rapidly with the total number of symbols and + the maximum code length in bits. However this is a very small price to pay + for the vast speedup. + + First, all of the possible Huffman codes are counted, and reachable + intermediate states are noted by a non-zero count in a saved-results array. + Second, the intermediate states that lead to (root + 1) bit or longer codes + are used to look at all sub-codes from those junctures for their inflate + memory usage. (The amount of memory used is not affected by the number of + codes of root bits or less in length.) Third, the visited states in the + construction of those sub-codes and the associated calculation of the table + size is recalled in order to avoid recalculating from the same juncture. + Beginning the code examination at (root + 1) bit codes, which is enabled by + identifying the reachable nodes, accounts for about six of the orders of + magnitude of improvement for the default arguments. About another four + orders of magnitude come from not revisiting previous states. Out of + approximately 2x10^16 possible Huffman codes, only about 2x10^6 sub-codes + need to be examined to cover all of the possible table memory usage cases + for the default arguments of 286 symbols limited to 15-bit codes. + + Note that an unsigned long long type is used for counting. It is quite easy + to exceed the capacity of an eight-byte integer with a large number of + symbols and a large maximum code length, so multiple-precision arithmetic + would need to replace the unsigned long long arithmetic in that case. This + program will abort if an overflow occurs. The big_t type identifies where + the counting takes place. + + An unsigned long long type is also used for calculating the number of + possible codes remaining at the maximum length. This limits the maximum + code length to the number of bits in a long long minus the number of bits + needed to represent the symbols in a flat code. The code_t type identifies + where the bit pattern counting takes place. + */ + +#include +#include +#include +#include + +#define local static + +/* special data types */ +typedef unsigned long long big_t; /* type for code counting */ +typedef unsigned long long code_t; /* type for bit pattern counting */ +struct tab { /* type for been here check */ + size_t len; /* length of bit vector in char's */ + char *vec; /* allocated bit vector */ +}; + +/* The array for saving results, num[], is indexed with this triplet: + + syms: number of symbols remaining to code + left: number of available bit patterns at length len + len: number of bits in the codes currently being assigned + + Those indices are constrained thusly when saving results: + + syms: 3..totsym (totsym == total symbols to code) + left: 2..syms - 1, but only the evens (so syms == 8 -> 2, 4, 6) + len: 1..max - 1 (max == maximum code length in bits) + + syms == 2 is not saved since that immediately leads to a single code. left + must be even, since it represents the number of available bit patterns at + the current length, which is double the number at the previous length. + left ends at syms-1 since left == syms immediately results in a single code. + (left > sym is not allowed since that would result in an incomplete code.) + len is less than max, since the code completes immediately when len == max. + + The offset into the array is calculated for the three indices with the + first one (syms) being outermost, and the last one (len) being innermost. + We build the array with length max-1 lists for the len index, with syms-3 + of those for each symbol. There are totsym-2 of those, with each one + varying in length as a function of sym. See the calculation of index in + count() for the index, and the calculation of size in main() for the size + of the array. + + For the deflate example of 286 symbols limited to 15-bit codes, the array + has 284,284 entries, taking up 2.17 MB for an 8-byte big_t. More than + half of the space allocated for saved results is actually used -- not all + possible triplets are reached in the generation of valid Huffman codes. + */ + +/* The array for tracking visited states, done[], is itself indexed identically + to the num[] array as described above for the (syms, left, len) triplet. + Each element in the array is further indexed by the (mem, rem) doublet, + where mem is the amount of inflate table space used so far, and rem is the + remaining unused entries in the current inflate sub-table. Each indexed + element is simply one bit indicating whether the state has been visited or + not. Since the ranges for mem and rem are not known a priori, each bit + vector is of a variable size, and grows as needed to accommodate the visited + states. mem and rem are used to calculate a single index in a triangular + array. Since the range of mem is expected in the default case to be about + ten times larger than the range of rem, the array is skewed to reduce the + memory usage, with eight times the range for mem than for rem. See the + calculations for offset and bit in beenhere() for the details. + + For the deflate example of 286 symbols limited to 15-bit codes, the bit + vectors grow to total approximately 21 MB, in addition to the 4.3 MB done[] + array itself. + */ + +/* Globals to avoid propagating constants or constant pointers recursively */ +local int max; /* maximum allowed bit length for the codes */ +local int root; /* size of base code table in bits */ +local int large; /* largest code table so far */ +local size_t size; /* number of elements in num and done */ +local int *code; /* number of symbols assigned to each bit length */ +local big_t *num; /* saved results array for code counting */ +local struct tab *done; /* states already evaluated array */ + +/* Index function for num[] and done[] */ +#define INDEX(i,j,k) (((size_t)((i-1)>>1)*((i-2)>>1)+(j>>1)-1)*(max-1)+k-1) + +/* Free allocated space. Uses globals code, num, and done. */ +local void cleanup(void) +{ + size_t n; + + if (done != NULL) { + for (n = 0; n < size; n++) + if (done[n].len) + free(done[n].vec); + free(done); + } + if (num != NULL) + free(num); + if (code != NULL) + free(code); +} + +/* Return the number of possible Huffman codes using bit patterns of lengths + len through max inclusive, coding syms symbols, with left bit patterns of + length len unused -- return -1 if there is an overflow in the counting. + Keep a record of previous results in num to prevent repeating the same + calculation. Uses the globals max and num. */ +local big_t count(int syms, int len, int left) +{ + big_t sum; /* number of possible codes from this juncture */ + big_t got; /* value returned from count() */ + int least; /* least number of syms to use at this juncture */ + int most; /* most number of syms to use at this juncture */ + int use; /* number of bit patterns to use in next call */ + size_t index; /* index of this case in *num */ + + /* see if only one possible code */ + if (syms == left) + return 1; + + /* note and verify the expected state */ + assert(syms > left && left > 0 && len < max); + + /* see if we've done this one already */ + index = INDEX(syms, left, len); + got = num[index]; + if (got) + return got; /* we have -- return the saved result */ + + /* we need to use at least this many bit patterns so that the code won't be + incomplete at the next length (more bit patterns than symbols) */ + least = (left << 1) - syms; + if (least < 0) + least = 0; + + /* we can use at most this many bit patterns, lest there not be enough + available for the remaining symbols at the maximum length (if there were + no limit to the code length, this would become: most = left - 1) */ + most = (((code_t)left << (max - len)) - syms) / + (((code_t)1 << (max - len)) - 1); + + /* count all possible codes from this juncture and add them up */ + sum = 0; + for (use = least; use <= most; use++) { + got = count(syms - use, len + 1, (left - use) << 1); + sum += got; + if (got == (big_t)0 - 1 || sum < got) /* overflow */ + return (big_t)0 - 1; + } + + /* verify that all recursive calls are productive */ + assert(sum != 0); + + /* save the result and return it */ + num[index] = sum; + return sum; +} + +/* Return true if we've been here before, set to true if not. Set a bit in a + bit vector to indicate visiting this state. Each (syms,len,left) state + has a variable size bit vector indexed by (mem,rem). The bit vector is + lengthened if needed to allow setting the (mem,rem) bit. */ +local int beenhere(int syms, int len, int left, int mem, int rem) +{ + size_t index; /* index for this state's bit vector */ + size_t offset; /* offset in this state's bit vector */ + int bit; /* mask for this state's bit */ + size_t length; /* length of the bit vector in bytes */ + char *vector; /* new or enlarged bit vector */ + + /* point to vector for (syms,left,len), bit in vector for (mem,rem) */ + index = INDEX(syms, left, len); + mem -= 1 << root; + offset = (mem >> 3) + rem; + offset = ((offset * (offset + 1)) >> 1) + rem; + bit = 1 << (mem & 7); + + /* see if we've been here */ + length = done[index].len; + if (offset < length && (done[index].vec[offset] & bit) != 0) + return 1; /* done this! */ + + /* we haven't been here before -- set the bit to show we have now */ + + /* see if we need to lengthen the vector in order to set the bit */ + if (length <= offset) { + /* if we have one already, enlarge it, zero out the appended space */ + if (length) { + do { + length <<= 1; + } while (length <= offset); + vector = realloc(done[index].vec, length); + if (vector != NULL) + memset(vector + done[index].len, 0, length - done[index].len); + } + + /* otherwise we need to make a new vector and zero it out */ + else { + length = 1 << (len - root); + while (length <= offset) + length <<= 1; + vector = calloc(length, sizeof(char)); + } + + /* in either case, bail if we can't get the memory */ + if (vector == NULL) { + fputs("abort: unable to allocate enough memory\n", stderr); + cleanup(); + exit(1); + } + + /* install the new vector */ + done[index].len = length; + done[index].vec = vector; + } + + /* set the bit */ + done[index].vec[offset] |= bit; + return 0; +} + +/* Examine all possible codes from the given node (syms, len, left). Compute + the amount of memory required to build inflate's decoding tables, where the + number of code structures used so far is mem, and the number remaining in + the current sub-table is rem. Uses the globals max, code, root, large, and + done. */ +local void examine(int syms, int len, int left, int mem, int rem) +{ + int least; /* least number of syms to use at this juncture */ + int most; /* most number of syms to use at this juncture */ + int use; /* number of bit patterns to use in next call */ + + /* see if we have a complete code */ + if (syms == left) { + /* set the last code entry */ + code[len] = left; + + /* complete computation of memory used by this code */ + while (rem < left) { + left -= rem; + rem = 1 << (len - root); + mem += rem; + } + assert(rem == left); + + /* if this is a new maximum, show the entries used and the sub-code */ + if (mem > large) { + large = mem; + printf("max %d: ", mem); + for (use = root + 1; use <= max; use++) + if (code[use]) + printf("%d[%d] ", code[use], use); + putchar('\n'); + fflush(stdout); + } + + /* remove entries as we drop back down in the recursion */ + code[len] = 0; + return; + } + + /* prune the tree if we can */ + if (beenhere(syms, len, left, mem, rem)) + return; + + /* we need to use at least this many bit patterns so that the code won't be + incomplete at the next length (more bit patterns than symbols) */ + least = (left << 1) - syms; + if (least < 0) + least = 0; + + /* we can use at most this many bit patterns, lest there not be enough + available for the remaining symbols at the maximum length (if there were + no limit to the code length, this would become: most = left - 1) */ + most = (((code_t)left << (max - len)) - syms) / + (((code_t)1 << (max - len)) - 1); + + /* occupy least table spaces, creating new sub-tables as needed */ + use = least; + while (rem < use) { + use -= rem; + rem = 1 << (len - root); + mem += rem; + } + rem -= use; + + /* examine codes from here, updating table space as we go */ + for (use = least; use <= most; use++) { + code[len] = use; + examine(syms - use, len + 1, (left - use) << 1, + mem + (rem ? 1 << (len - root) : 0), rem << 1); + if (rem == 0) { + rem = 1 << (len - root); + mem += rem; + } + rem--; + } + + /* remove entries as we drop back down in the recursion */ + code[len] = 0; +} + +/* Look at all sub-codes starting with root + 1 bits. Look at only the valid + intermediate code states (syms, left, len). For each completed code, + calculate the amount of memory required by inflate to build the decoding + tables. Find the maximum amount of memory required and show the code that + requires that maximum. Uses the globals max, root, and num. */ +local void enough(int syms) +{ + int n; /* number of remaing symbols for this node */ + int left; /* number of unused bit patterns at this length */ + size_t index; /* index of this case in *num */ + + /* clear code */ + for (n = 0; n <= max; n++) + code[n] = 0; + + /* look at all (root + 1) bit and longer codes */ + large = 1 << root; /* base table */ + if (root < max) /* otherwise, there's only a base table */ + for (n = 3; n <= syms; n++) + for (left = 2; left < n; left += 2) + { + /* look at all reachable (root + 1) bit nodes, and the + resulting codes (complete at root + 2 or more) */ + index = INDEX(n, left, root + 1); + if (root + 1 < max && num[index]) /* reachable node */ + examine(n, root + 1, left, 1 << root, 0); + + /* also look at root bit codes with completions at root + 1 + bits (not saved in num, since complete), just in case */ + if (num[index - 1] && n <= left << 1) + examine((n - left) << 1, root + 1, (n - left) << 1, + 1 << root, 0); + } + + /* done */ + printf("done: maximum of %d table entries\n", large); +} + +/* + Examine and show the total number of possible Huffman codes for a given + maximum number of symbols, initial root table size, and maximum code length + in bits -- those are the command arguments in that order. The default + values are 286, 9, and 15 respectively, for the deflate literal/length code. + The possible codes are counted for each number of coded symbols from two to + the maximum. The counts for each of those and the total number of codes are + shown. The maximum number of inflate table entires is then calculated + across all possible codes. Each new maximum number of table entries and the + associated sub-code (starting at root + 1 == 10 bits) is shown. + + To count and examine Huffman codes that are not length-limited, provide a + maximum length equal to the number of symbols minus one. + + For the deflate literal/length code, use "enough". For the deflate distance + code, use "enough 30 6". + + This uses the %llu printf format to print big_t numbers, which assumes that + big_t is an unsigned long long. If the big_t type is changed (for example + to a multiple precision type), the method of printing will also need to be + updated. + */ +int main(int argc, char **argv) +{ + int syms; /* total number of symbols to code */ + int n; /* number of symbols to code for this run */ + big_t got; /* return value of count() */ + big_t sum; /* accumulated number of codes over n */ + code_t word; /* for counting bits in code_t */ + + /* set up globals for cleanup() */ + code = NULL; + num = NULL; + done = NULL; + + /* get arguments -- default to the deflate literal/length code */ + syms = 286; + root = 9; + max = 15; + if (argc > 1) { + syms = atoi(argv[1]); + if (argc > 2) { + root = atoi(argv[2]); + if (argc > 3) + max = atoi(argv[3]); + } + } + if (argc > 4 || syms < 2 || root < 1 || max < 1) { + fputs("invalid arguments, need: [sym >= 2 [root >= 1 [max >= 1]]]\n", + stderr); + return 1; + } + + /* if not restricting the code length, the longest is syms - 1 */ + if (max > syms - 1) + max = syms - 1; + + /* determine the number of bits in a code_t */ + for (n = 0, word = 1; word; n++, word <<= 1) + ; + + /* make sure that the calculation of most will not overflow */ + if (max > n || (code_t)(syms - 2) >= (((code_t)0 - 1) >> (max - 1))) { + fputs("abort: code length too long for internal types\n", stderr); + return 1; + } + + /* reject impossible code requests */ + if ((code_t)(syms - 1) > ((code_t)1 << max) - 1) { + fprintf(stderr, "%d symbols cannot be coded in %d bits\n", + syms, max); + return 1; + } + + /* allocate code vector */ + code = calloc(max + 1, sizeof(int)); + if (code == NULL) { + fputs("abort: unable to allocate enough memory\n", stderr); + return 1; + } + + /* determine size of saved results array, checking for overflows, + allocate and clear the array (set all to zero with calloc()) */ + if (syms == 2) /* iff max == 1 */ + num = NULL; /* won't be saving any results */ + else { + size = syms >> 1; + if (size > ((size_t)0 - 1) / (n = (syms - 1) >> 1) || + (size *= n, size > ((size_t)0 - 1) / (n = max - 1)) || + (size *= n, size > ((size_t)0 - 1) / sizeof(big_t)) || + (num = calloc(size, sizeof(big_t))) == NULL) { + fputs("abort: unable to allocate enough memory\n", stderr); + cleanup(); + return 1; + } + } + + /* count possible codes for all numbers of symbols, add up counts */ + sum = 0; + for (n = 2; n <= syms; n++) { + got = count(n, 1, 2); + sum += got; + if (got == (big_t)0 - 1 || sum < got) { /* overflow */ + fputs("abort: can't count that high!\n", stderr); + cleanup(); + return 1; + } + printf("%llu %d-codes\n", got, n); + } + printf("%llu total codes for 2 to %d symbols", sum, syms); + if (max < syms - 1) + printf(" (%d-bit length limit)\n", max); + else + puts(" (no length limit)"); + + /* allocate and clear done array for beenhere() */ + if (syms == 2) + done = NULL; + else if (size > ((size_t)0 - 1) / sizeof(struct tab) || + (done = calloc(size, sizeof(struct tab))) == NULL) { + fputs("abort: unable to allocate enough memory\n", stderr); + cleanup(); + return 1; + } + + /* find and show maximum inflate table usage */ + if (root > max) /* reduce root to max length */ + root = max; + if ((code_t)syms < ((code_t)1 << (root + 1))) + enough(syms); + else + puts("cannot handle minimum code lengths > root"); + + /* done */ + cleanup(); + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/examples/fitblk.c b/src/SDL2/external/zlib-1.2.8/examples/fitblk.c new file mode 100644 index 000000000..c61de5c99 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/examples/fitblk.c @@ -0,0 +1,233 @@ +/* fitblk.c: example of fitting compressed output to a specified size + Not copyrighted -- provided to the public domain + Version 1.1 25 November 2004 Mark Adler */ + +/* Version history: + 1.0 24 Nov 2004 First version + 1.1 25 Nov 2004 Change deflateInit2() to deflateInit() + Use fixed-size, stack-allocated raw buffers + Simplify code moving compression to subroutines + Use assert() for internal errors + Add detailed description of approach + */ + +/* Approach to just fitting a requested compressed size: + + fitblk performs three compression passes on a portion of the input + data in order to determine how much of that input will compress to + nearly the requested output block size. The first pass generates + enough deflate blocks to produce output to fill the requested + output size plus a specfied excess amount (see the EXCESS define + below). The last deflate block may go quite a bit past that, but + is discarded. The second pass decompresses and recompresses just + the compressed data that fit in the requested plus excess sized + buffer. The deflate process is terminated after that amount of + input, which is less than the amount consumed on the first pass. + The last deflate block of the result will be of a comparable size + to the final product, so that the header for that deflate block and + the compression ratio for that block will be about the same as in + the final product. The third compression pass decompresses the + result of the second step, but only the compressed data up to the + requested size minus an amount to allow the compressed stream to + complete (see the MARGIN define below). That will result in a + final compressed stream whose length is less than or equal to the + requested size. Assuming sufficient input and a requested size + greater than a few hundred bytes, the shortfall will typically be + less than ten bytes. + + If the input is short enough that the first compression completes + before filling the requested output size, then that compressed + stream is return with no recompression. + + EXCESS is chosen to be just greater than the shortfall seen in a + two pass approach similar to the above. That shortfall is due to + the last deflate block compressing more efficiently with a smaller + header on the second pass. EXCESS is set to be large enough so + that there is enough uncompressed data for the second pass to fill + out the requested size, and small enough so that the final deflate + block of the second pass will be close in size to the final deflate + block of the third and final pass. MARGIN is chosen to be just + large enough to assure that the final compression has enough room + to complete in all cases. + */ + +#include +#include +#include +#include "zlib.h" + +#define local static + +/* print nastygram and leave */ +local void quit(char *why) +{ + fprintf(stderr, "fitblk abort: %s\n", why); + exit(1); +} + +#define RAWLEN 4096 /* intermediate uncompressed buffer size */ + +/* compress from file to def until provided buffer is full or end of + input reached; return last deflate() return value, or Z_ERRNO if + there was read error on the file */ +local int partcompress(FILE *in, z_streamp def) +{ + int ret, flush; + unsigned char raw[RAWLEN]; + + flush = Z_NO_FLUSH; + do { + def->avail_in = fread(raw, 1, RAWLEN, in); + if (ferror(in)) + return Z_ERRNO; + def->next_in = raw; + if (feof(in)) + flush = Z_FINISH; + ret = deflate(def, flush); + assert(ret != Z_STREAM_ERROR); + } while (def->avail_out != 0 && flush == Z_NO_FLUSH); + return ret; +} + +/* recompress from inf's input to def's output; the input for inf and + the output for def are set in those structures before calling; + return last deflate() return value, or Z_MEM_ERROR if inflate() + was not able to allocate enough memory when it needed to */ +local int recompress(z_streamp inf, z_streamp def) +{ + int ret, flush; + unsigned char raw[RAWLEN]; + + flush = Z_NO_FLUSH; + do { + /* decompress */ + inf->avail_out = RAWLEN; + inf->next_out = raw; + ret = inflate(inf, Z_NO_FLUSH); + assert(ret != Z_STREAM_ERROR && ret != Z_DATA_ERROR && + ret != Z_NEED_DICT); + if (ret == Z_MEM_ERROR) + return ret; + + /* compress what was decompresed until done or no room */ + def->avail_in = RAWLEN - inf->avail_out; + def->next_in = raw; + if (inf->avail_out != 0) + flush = Z_FINISH; + ret = deflate(def, flush); + assert(ret != Z_STREAM_ERROR); + } while (ret != Z_STREAM_END && def->avail_out != 0); + return ret; +} + +#define EXCESS 256 /* empirically determined stream overage */ +#define MARGIN 8 /* amount to back off for completion */ + +/* compress from stdin to fixed-size block on stdout */ +int main(int argc, char **argv) +{ + int ret; /* return code */ + unsigned size; /* requested fixed output block size */ + unsigned have; /* bytes written by deflate() call */ + unsigned char *blk; /* intermediate and final stream */ + unsigned char *tmp; /* close to desired size stream */ + z_stream def, inf; /* zlib deflate and inflate states */ + + /* get requested output size */ + if (argc != 2) + quit("need one argument: size of output block"); + ret = strtol(argv[1], argv + 1, 10); + if (argv[1][0] != 0) + quit("argument must be a number"); + if (ret < 8) /* 8 is minimum zlib stream size */ + quit("need positive size of 8 or greater"); + size = (unsigned)ret; + + /* allocate memory for buffers and compression engine */ + blk = malloc(size + EXCESS); + def.zalloc = Z_NULL; + def.zfree = Z_NULL; + def.opaque = Z_NULL; + ret = deflateInit(&def, Z_DEFAULT_COMPRESSION); + if (ret != Z_OK || blk == NULL) + quit("out of memory"); + + /* compress from stdin until output full, or no more input */ + def.avail_out = size + EXCESS; + def.next_out = blk; + ret = partcompress(stdin, &def); + if (ret == Z_ERRNO) + quit("error reading input"); + + /* if it all fit, then size was undersubscribed -- done! */ + if (ret == Z_STREAM_END && def.avail_out >= EXCESS) { + /* write block to stdout */ + have = size + EXCESS - def.avail_out; + if (fwrite(blk, 1, have, stdout) != have || ferror(stdout)) + quit("error writing output"); + + /* clean up and print results to stderr */ + ret = deflateEnd(&def); + assert(ret != Z_STREAM_ERROR); + free(blk); + fprintf(stderr, + "%u bytes unused out of %u requested (all input)\n", + size - have, size); + return 0; + } + + /* it didn't all fit -- set up for recompression */ + inf.zalloc = Z_NULL; + inf.zfree = Z_NULL; + inf.opaque = Z_NULL; + inf.avail_in = 0; + inf.next_in = Z_NULL; + ret = inflateInit(&inf); + tmp = malloc(size + EXCESS); + if (ret != Z_OK || tmp == NULL) + quit("out of memory"); + ret = deflateReset(&def); + assert(ret != Z_STREAM_ERROR); + + /* do first recompression close to the right amount */ + inf.avail_in = size + EXCESS; + inf.next_in = blk; + def.avail_out = size + EXCESS; + def.next_out = tmp; + ret = recompress(&inf, &def); + if (ret == Z_MEM_ERROR) + quit("out of memory"); + + /* set up for next reocmpression */ + ret = inflateReset(&inf); + assert(ret != Z_STREAM_ERROR); + ret = deflateReset(&def); + assert(ret != Z_STREAM_ERROR); + + /* do second and final recompression (third compression) */ + inf.avail_in = size - MARGIN; /* assure stream will complete */ + inf.next_in = tmp; + def.avail_out = size; + def.next_out = blk; + ret = recompress(&inf, &def); + if (ret == Z_MEM_ERROR) + quit("out of memory"); + assert(ret == Z_STREAM_END); /* otherwise MARGIN too small */ + + /* done -- write block to stdout */ + have = size - def.avail_out; + if (fwrite(blk, 1, have, stdout) != have || ferror(stdout)) + quit("error writing output"); + + /* clean up and print results to stderr */ + free(tmp); + ret = inflateEnd(&inf); + assert(ret != Z_STREAM_ERROR); + ret = deflateEnd(&def); + assert(ret != Z_STREAM_ERROR); + free(blk); + fprintf(stderr, + "%u bytes unused out of %u requested (%lu input)\n", + size - have, size, def.total_in); + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/examples/gun.c b/src/SDL2/external/zlib-1.2.8/examples/gun.c new file mode 100644 index 000000000..89e484fee --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/examples/gun.c @@ -0,0 +1,702 @@ +/* gun.c -- simple gunzip to give an example of the use of inflateBack() + * Copyright (C) 2003, 2005, 2008, 2010, 2012 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + Version 1.7 12 August 2012 Mark Adler */ + +/* Version history: + 1.0 16 Feb 2003 First version for testing of inflateBack() + 1.1 21 Feb 2005 Decompress concatenated gzip streams + Remove use of "this" variable (C++ keyword) + Fix return value for in() + Improve allocation failure checking + Add typecasting for void * structures + Add -h option for command version and usage + Add a bunch of comments + 1.2 20 Mar 2005 Add Unix compress (LZW) decompression + Copy file attributes from input file to output file + 1.3 12 Jun 2005 Add casts for error messages [Oberhumer] + 1.4 8 Dec 2006 LZW decompression speed improvements + 1.5 9 Feb 2008 Avoid warning in latest version of gcc + 1.6 17 Jan 2010 Avoid signed/unsigned comparison warnings + 1.7 12 Aug 2012 Update for z_const usage in zlib 1.2.8 + */ + +/* + gun [ -t ] [ name ... ] + + decompresses the data in the named gzip files. If no arguments are given, + gun will decompress from stdin to stdout. The names must end in .gz, -gz, + .z, -z, _z, or .Z. The uncompressed data will be written to a file name + with the suffix stripped. On success, the original file is deleted. On + failure, the output file is deleted. For most failures, the command will + continue to process the remaining names on the command line. A memory + allocation failure will abort the command. If -t is specified, then the + listed files or stdin will be tested as gzip files for integrity (without + checking for a proper suffix), no output will be written, and no files + will be deleted. + + Like gzip, gun allows concatenated gzip streams and will decompress them, + writing all of the uncompressed data to the output. Unlike gzip, gun allows + an empty file on input, and will produce no error writing an empty output + file. + + gun will also decompress files made by Unix compress, which uses LZW + compression. These files are automatically detected by virtue of their + magic header bytes. Since the end of Unix compress stream is marked by the + end-of-file, they cannot be concantenated. If a Unix compress stream is + encountered in an input file, it is the last stream in that file. + + Like gunzip and uncompress, the file attributes of the orignal compressed + file are maintained in the final uncompressed file, to the extent that the + user permissions allow it. + + On my Mac OS X PowerPC G4, gun is almost twice as fast as gunzip (version + 1.2.4) is on the same file, when gun is linked with zlib 1.2.2. Also the + LZW decompression provided by gun is about twice as fast as the standard + Unix uncompress command. + */ + +/* external functions and related types and constants */ +#include /* fprintf() */ +#include /* malloc(), free() */ +#include /* strerror(), strcmp(), strlen(), memcpy() */ +#include /* errno */ +#include /* open() */ +#include /* read(), write(), close(), chown(), unlink() */ +#include +#include /* stat(), chmod() */ +#include /* utime() */ +#include "zlib.h" /* inflateBackInit(), inflateBack(), */ + /* inflateBackEnd(), crc32() */ + +/* function declaration */ +#define local static + +/* buffer constants */ +#define SIZE 32768U /* input and output buffer sizes */ +#define PIECE 16384 /* limits i/o chunks for 16-bit int case */ + +/* structure for infback() to pass to input function in() -- it maintains the + input file and a buffer of size SIZE */ +struct ind { + int infile; + unsigned char *inbuf; +}; + +/* Load input buffer, assumed to be empty, and return bytes loaded and a + pointer to them. read() is called until the buffer is full, or until it + returns end-of-file or error. Return 0 on error. */ +local unsigned in(void *in_desc, z_const unsigned char **buf) +{ + int ret; + unsigned len; + unsigned char *next; + struct ind *me = (struct ind *)in_desc; + + next = me->inbuf; + *buf = next; + len = 0; + do { + ret = PIECE; + if ((unsigned)ret > SIZE - len) + ret = (int)(SIZE - len); + ret = (int)read(me->infile, next, ret); + if (ret == -1) { + len = 0; + break; + } + next += ret; + len += ret; + } while (ret != 0 && len < SIZE); + return len; +} + +/* structure for infback() to pass to output function out() -- it maintains the + output file, a running CRC-32 check on the output and the total number of + bytes output, both for checking against the gzip trailer. (The length in + the gzip trailer is stored modulo 2^32, so it's ok if a long is 32 bits and + the output is greater than 4 GB.) */ +struct outd { + int outfile; + int check; /* true if checking crc and total */ + unsigned long crc; + unsigned long total; +}; + +/* Write output buffer and update the CRC-32 and total bytes written. write() + is called until all of the output is written or an error is encountered. + On success out() returns 0. For a write failure, out() returns 1. If the + output file descriptor is -1, then nothing is written. + */ +local int out(void *out_desc, unsigned char *buf, unsigned len) +{ + int ret; + struct outd *me = (struct outd *)out_desc; + + if (me->check) { + me->crc = crc32(me->crc, buf, len); + me->total += len; + } + if (me->outfile != -1) + do { + ret = PIECE; + if ((unsigned)ret > len) + ret = (int)len; + ret = (int)write(me->outfile, buf, ret); + if (ret == -1) + return 1; + buf += ret; + len -= ret; + } while (len != 0); + return 0; +} + +/* next input byte macro for use inside lunpipe() and gunpipe() */ +#define NEXT() (have ? 0 : (have = in(indp, &next)), \ + last = have ? (have--, (int)(*next++)) : -1) + +/* memory for gunpipe() and lunpipe() -- + the first 256 entries of prefix[] and suffix[] are never used, could + have offset the index, but it's faster to waste the memory */ +unsigned char inbuf[SIZE]; /* input buffer */ +unsigned char outbuf[SIZE]; /* output buffer */ +unsigned short prefix[65536]; /* index to LZW prefix string */ +unsigned char suffix[65536]; /* one-character LZW suffix */ +unsigned char match[65280 + 2]; /* buffer for reversed match or gzip + 32K sliding window */ + +/* throw out what's left in the current bits byte buffer (this is a vestigial + aspect of the compressed data format derived from an implementation that + made use of a special VAX machine instruction!) */ +#define FLUSHCODE() \ + do { \ + left = 0; \ + rem = 0; \ + if (chunk > have) { \ + chunk -= have; \ + have = 0; \ + if (NEXT() == -1) \ + break; \ + chunk--; \ + if (chunk > have) { \ + chunk = have = 0; \ + break; \ + } \ + } \ + have -= chunk; \ + next += chunk; \ + chunk = 0; \ + } while (0) + +/* Decompress a compress (LZW) file from indp to outfile. The compress magic + header (two bytes) has already been read and verified. There are have bytes + of buffered input at next. strm is used for passing error information back + to gunpipe(). + + lunpipe() will return Z_OK on success, Z_BUF_ERROR for an unexpected end of + file, read error, or write error (a write error indicated by strm->next_in + not equal to Z_NULL), or Z_DATA_ERROR for invalid input. + */ +local int lunpipe(unsigned have, z_const unsigned char *next, struct ind *indp, + int outfile, z_stream *strm) +{ + int last; /* last byte read by NEXT(), or -1 if EOF */ + unsigned chunk; /* bytes left in current chunk */ + int left; /* bits left in rem */ + unsigned rem; /* unused bits from input */ + int bits; /* current bits per code */ + unsigned code; /* code, table traversal index */ + unsigned mask; /* mask for current bits codes */ + int max; /* maximum bits per code for this stream */ + unsigned flags; /* compress flags, then block compress flag */ + unsigned end; /* last valid entry in prefix/suffix tables */ + unsigned temp; /* current code */ + unsigned prev; /* previous code */ + unsigned final; /* last character written for previous code */ + unsigned stack; /* next position for reversed string */ + unsigned outcnt; /* bytes in output buffer */ + struct outd outd; /* output structure */ + unsigned char *p; + + /* set up output */ + outd.outfile = outfile; + outd.check = 0; + + /* process remainder of compress header -- a flags byte */ + flags = NEXT(); + if (last == -1) + return Z_BUF_ERROR; + if (flags & 0x60) { + strm->msg = (char *)"unknown lzw flags set"; + return Z_DATA_ERROR; + } + max = flags & 0x1f; + if (max < 9 || max > 16) { + strm->msg = (char *)"lzw bits out of range"; + return Z_DATA_ERROR; + } + if (max == 9) /* 9 doesn't really mean 9 */ + max = 10; + flags &= 0x80; /* true if block compress */ + + /* clear table */ + bits = 9; + mask = 0x1ff; + end = flags ? 256 : 255; + + /* set up: get first 9-bit code, which is the first decompressed byte, but + don't create a table entry until the next code */ + if (NEXT() == -1) /* no compressed data is ok */ + return Z_OK; + final = prev = (unsigned)last; /* low 8 bits of code */ + if (NEXT() == -1) /* missing a bit */ + return Z_BUF_ERROR; + if (last & 1) { /* code must be < 256 */ + strm->msg = (char *)"invalid lzw code"; + return Z_DATA_ERROR; + } + rem = (unsigned)last >> 1; /* remaining 7 bits */ + left = 7; + chunk = bits - 2; /* 7 bytes left in this chunk */ + outbuf[0] = (unsigned char)final; /* write first decompressed byte */ + outcnt = 1; + + /* decode codes */ + stack = 0; + for (;;) { + /* if the table will be full after this, increment the code size */ + if (end >= mask && bits < max) { + FLUSHCODE(); + bits++; + mask <<= 1; + mask++; + } + + /* get a code of length bits */ + if (chunk == 0) /* decrement chunk modulo bits */ + chunk = bits; + code = rem; /* low bits of code */ + if (NEXT() == -1) { /* EOF is end of compressed data */ + /* write remaining buffered output */ + if (outcnt && out(&outd, outbuf, outcnt)) { + strm->next_in = outbuf; /* signal write error */ + return Z_BUF_ERROR; + } + return Z_OK; + } + code += (unsigned)last << left; /* middle (or high) bits of code */ + left += 8; + chunk--; + if (bits > left) { /* need more bits */ + if (NEXT() == -1) /* can't end in middle of code */ + return Z_BUF_ERROR; + code += (unsigned)last << left; /* high bits of code */ + left += 8; + chunk--; + } + code &= mask; /* mask to current code length */ + left -= bits; /* number of unused bits */ + rem = (unsigned)last >> (8 - left); /* unused bits from last byte */ + + /* process clear code (256) */ + if (code == 256 && flags) { + FLUSHCODE(); + bits = 9; /* initialize bits and mask */ + mask = 0x1ff; + end = 255; /* empty table */ + continue; /* get next code */ + } + + /* special code to reuse last match */ + temp = code; /* save the current code */ + if (code > end) { + /* Be picky on the allowed code here, and make sure that the code + we drop through (prev) will be a valid index so that random + input does not cause an exception. The code != end + 1 check is + empirically derived, and not checked in the original uncompress + code. If this ever causes a problem, that check could be safely + removed. Leaving this check in greatly improves gun's ability + to detect random or corrupted input after a compress header. + In any case, the prev > end check must be retained. */ + if (code != end + 1 || prev > end) { + strm->msg = (char *)"invalid lzw code"; + return Z_DATA_ERROR; + } + match[stack++] = (unsigned char)final; + code = prev; + } + + /* walk through linked list to generate output in reverse order */ + p = match + stack; + while (code >= 256) { + *p++ = suffix[code]; + code = prefix[code]; + } + stack = p - match; + match[stack++] = (unsigned char)code; + final = code; + + /* link new table entry */ + if (end < mask) { + end++; + prefix[end] = (unsigned short)prev; + suffix[end] = (unsigned char)final; + } + + /* set previous code for next iteration */ + prev = temp; + + /* write output in forward order */ + while (stack > SIZE - outcnt) { + while (outcnt < SIZE) + outbuf[outcnt++] = match[--stack]; + if (out(&outd, outbuf, outcnt)) { + strm->next_in = outbuf; /* signal write error */ + return Z_BUF_ERROR; + } + outcnt = 0; + } + p = match + stack; + do { + outbuf[outcnt++] = *--p; + } while (p > match); + stack = 0; + + /* loop for next code with final and prev as the last match, rem and + left provide the first 0..7 bits of the next code, end is the last + valid table entry */ + } +} + +/* Decompress a gzip file from infile to outfile. strm is assumed to have been + successfully initialized with inflateBackInit(). The input file may consist + of a series of gzip streams, in which case all of them will be decompressed + to the output file. If outfile is -1, then the gzip stream(s) integrity is + checked and nothing is written. + + The return value is a zlib error code: Z_MEM_ERROR if out of memory, + Z_DATA_ERROR if the header or the compressed data is invalid, or if the + trailer CRC-32 check or length doesn't match, Z_BUF_ERROR if the input ends + prematurely or a write error occurs, or Z_ERRNO if junk (not a another gzip + stream) follows a valid gzip stream. + */ +local int gunpipe(z_stream *strm, int infile, int outfile) +{ + int ret, first, last; + unsigned have, flags, len; + z_const unsigned char *next = NULL; + struct ind ind, *indp; + struct outd outd; + + /* setup input buffer */ + ind.infile = infile; + ind.inbuf = inbuf; + indp = &ind; + + /* decompress concatenated gzip streams */ + have = 0; /* no input data read in yet */ + first = 1; /* looking for first gzip header */ + strm->next_in = Z_NULL; /* so Z_BUF_ERROR means EOF */ + for (;;) { + /* look for the two magic header bytes for a gzip stream */ + if (NEXT() == -1) { + ret = Z_OK; + break; /* empty gzip stream is ok */ + } + if (last != 31 || (NEXT() != 139 && last != 157)) { + strm->msg = (char *)"incorrect header check"; + ret = first ? Z_DATA_ERROR : Z_ERRNO; + break; /* not a gzip or compress header */ + } + first = 0; /* next non-header is junk */ + + /* process a compress (LZW) file -- can't be concatenated after this */ + if (last == 157) { + ret = lunpipe(have, next, indp, outfile, strm); + break; + } + + /* process remainder of gzip header */ + ret = Z_BUF_ERROR; + if (NEXT() != 8) { /* only deflate method allowed */ + if (last == -1) break; + strm->msg = (char *)"unknown compression method"; + ret = Z_DATA_ERROR; + break; + } + flags = NEXT(); /* header flags */ + NEXT(); /* discard mod time, xflgs, os */ + NEXT(); + NEXT(); + NEXT(); + NEXT(); + NEXT(); + if (last == -1) break; + if (flags & 0xe0) { + strm->msg = (char *)"unknown header flags set"; + ret = Z_DATA_ERROR; + break; + } + if (flags & 4) { /* extra field */ + len = NEXT(); + len += (unsigned)(NEXT()) << 8; + if (last == -1) break; + while (len > have) { + len -= have; + have = 0; + if (NEXT() == -1) break; + len--; + } + if (last == -1) break; + have -= len; + next += len; + } + if (flags & 8) /* file name */ + while (NEXT() != 0 && last != -1) + ; + if (flags & 16) /* comment */ + while (NEXT() != 0 && last != -1) + ; + if (flags & 2) { /* header crc */ + NEXT(); + NEXT(); + } + if (last == -1) break; + + /* set up output */ + outd.outfile = outfile; + outd.check = 1; + outd.crc = crc32(0L, Z_NULL, 0); + outd.total = 0; + + /* decompress data to output */ + strm->next_in = next; + strm->avail_in = have; + ret = inflateBack(strm, in, indp, out, &outd); + if (ret != Z_STREAM_END) break; + next = strm->next_in; + have = strm->avail_in; + strm->next_in = Z_NULL; /* so Z_BUF_ERROR means EOF */ + + /* check trailer */ + ret = Z_BUF_ERROR; + if (NEXT() != (int)(outd.crc & 0xff) || + NEXT() != (int)((outd.crc >> 8) & 0xff) || + NEXT() != (int)((outd.crc >> 16) & 0xff) || + NEXT() != (int)((outd.crc >> 24) & 0xff)) { + /* crc error */ + if (last != -1) { + strm->msg = (char *)"incorrect data check"; + ret = Z_DATA_ERROR; + } + break; + } + if (NEXT() != (int)(outd.total & 0xff) || + NEXT() != (int)((outd.total >> 8) & 0xff) || + NEXT() != (int)((outd.total >> 16) & 0xff) || + NEXT() != (int)((outd.total >> 24) & 0xff)) { + /* length error */ + if (last != -1) { + strm->msg = (char *)"incorrect length check"; + ret = Z_DATA_ERROR; + } + break; + } + + /* go back and look for another gzip stream */ + } + + /* clean up and return */ + return ret; +} + +/* Copy file attributes, from -> to, as best we can. This is best effort, so + no errors are reported. The mode bits, including suid, sgid, and the sticky + bit are copied (if allowed), the owner's user id and group id are copied + (again if allowed), and the access and modify times are copied. */ +local void copymeta(char *from, char *to) +{ + struct stat was; + struct utimbuf when; + + /* get all of from's Unix meta data, return if not a regular file */ + if (stat(from, &was) != 0 || (was.st_mode & S_IFMT) != S_IFREG) + return; + + /* set to's mode bits, ignore errors */ + (void)chmod(to, was.st_mode & 07777); + + /* copy owner's user and group, ignore errors */ + (void)chown(to, was.st_uid, was.st_gid); + + /* copy access and modify times, ignore errors */ + when.actime = was.st_atime; + when.modtime = was.st_mtime; + (void)utime(to, &when); +} + +/* Decompress the file inname to the file outnname, of if test is true, just + decompress without writing and check the gzip trailer for integrity. If + inname is NULL or an empty string, read from stdin. If outname is NULL or + an empty string, write to stdout. strm is a pre-initialized inflateBack + structure. When appropriate, copy the file attributes from inname to + outname. + + gunzip() returns 1 if there is an out-of-memory error or an unexpected + return code from gunpipe(). Otherwise it returns 0. + */ +local int gunzip(z_stream *strm, char *inname, char *outname, int test) +{ + int ret; + int infile, outfile; + + /* open files */ + if (inname == NULL || *inname == 0) { + inname = "-"; + infile = 0; /* stdin */ + } + else { + infile = open(inname, O_RDONLY, 0); + if (infile == -1) { + fprintf(stderr, "gun cannot open %s\n", inname); + return 0; + } + } + if (test) + outfile = -1; + else if (outname == NULL || *outname == 0) { + outname = "-"; + outfile = 1; /* stdout */ + } + else { + outfile = open(outname, O_CREAT | O_TRUNC | O_WRONLY, 0666); + if (outfile == -1) { + close(infile); + fprintf(stderr, "gun cannot create %s\n", outname); + return 0; + } + } + errno = 0; + + /* decompress */ + ret = gunpipe(strm, infile, outfile); + if (outfile > 2) close(outfile); + if (infile > 2) close(infile); + + /* interpret result */ + switch (ret) { + case Z_OK: + case Z_ERRNO: + if (infile > 2 && outfile > 2) { + copymeta(inname, outname); /* copy attributes */ + unlink(inname); + } + if (ret == Z_ERRNO) + fprintf(stderr, "gun warning: trailing garbage ignored in %s\n", + inname); + break; + case Z_DATA_ERROR: + if (outfile > 2) unlink(outname); + fprintf(stderr, "gun data error on %s: %s\n", inname, strm->msg); + break; + case Z_MEM_ERROR: + if (outfile > 2) unlink(outname); + fprintf(stderr, "gun out of memory error--aborting\n"); + return 1; + case Z_BUF_ERROR: + if (outfile > 2) unlink(outname); + if (strm->next_in != Z_NULL) { + fprintf(stderr, "gun write error on %s: %s\n", + outname, strerror(errno)); + } + else if (errno) { + fprintf(stderr, "gun read error on %s: %s\n", + inname, strerror(errno)); + } + else { + fprintf(stderr, "gun unexpected end of file on %s\n", + inname); + } + break; + default: + if (outfile > 2) unlink(outname); + fprintf(stderr, "gun internal error--aborting\n"); + return 1; + } + return 0; +} + +/* Process the gun command line arguments. See the command syntax near the + beginning of this source file. */ +int main(int argc, char **argv) +{ + int ret, len, test; + char *outname; + unsigned char *window; + z_stream strm; + + /* initialize inflateBack state for repeated use */ + window = match; /* reuse LZW match buffer */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + ret = inflateBackInit(&strm, 15, window); + if (ret != Z_OK) { + fprintf(stderr, "gun out of memory error--aborting\n"); + return 1; + } + + /* decompress each file to the same name with the suffix removed */ + argc--; + argv++; + test = 0; + if (argc && strcmp(*argv, "-h") == 0) { + fprintf(stderr, "gun 1.6 (17 Jan 2010)\n"); + fprintf(stderr, "Copyright (C) 2003-2010 Mark Adler\n"); + fprintf(stderr, "usage: gun [-t] [file1.gz [file2.Z ...]]\n"); + return 0; + } + if (argc && strcmp(*argv, "-t") == 0) { + test = 1; + argc--; + argv++; + } + if (argc) + do { + if (test) + outname = NULL; + else { + len = (int)strlen(*argv); + if (strcmp(*argv + len - 3, ".gz") == 0 || + strcmp(*argv + len - 3, "-gz") == 0) + len -= 3; + else if (strcmp(*argv + len - 2, ".z") == 0 || + strcmp(*argv + len - 2, "-z") == 0 || + strcmp(*argv + len - 2, "_z") == 0 || + strcmp(*argv + len - 2, ".Z") == 0) + len -= 2; + else { + fprintf(stderr, "gun error: no gz type on %s--skipping\n", + *argv); + continue; + } + outname = malloc(len + 1); + if (outname == NULL) { + fprintf(stderr, "gun out of memory error--aborting\n"); + ret = 1; + break; + } + memcpy(outname, *argv, len); + outname[len] = 0; + } + ret = gunzip(&strm, *argv, outname, test); + if (outname != NULL) free(outname); + if (ret) break; + } while (argv++, --argc); + else + ret = gunzip(&strm, NULL, NULL, test); + + /* clean up */ + inflateBackEnd(&strm); + return ret; +} diff --git a/src/SDL2/external/zlib-1.2.8/examples/gzappend.c b/src/SDL2/external/zlib-1.2.8/examples/gzappend.c new file mode 100644 index 000000000..662dec379 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/examples/gzappend.c @@ -0,0 +1,504 @@ +/* gzappend -- command to append to a gzip file + + Copyright (C) 2003, 2012 Mark Adler, all rights reserved + version 1.2, 11 Oct 2012 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + +/* + * Change history: + * + * 1.0 19 Oct 2003 - First version + * 1.1 4 Nov 2003 - Expand and clarify some comments and notes + * - Add version and copyright to help + * - Send help to stdout instead of stderr + * - Add some preemptive typecasts + * - Add L to constants in lseek() calls + * - Remove some debugging information in error messages + * - Use new data_type definition for zlib 1.2.1 + * - Simplfy and unify file operations + * - Finish off gzip file in gztack() + * - Use deflatePrime() instead of adding empty blocks + * - Keep gzip file clean on appended file read errors + * - Use in-place rotate instead of auxiliary buffer + * (Why you ask? Because it was fun to write!) + * 1.2 11 Oct 2012 - Fix for proper z_const usage + * - Check for input buffer malloc failure + */ + +/* + gzappend takes a gzip file and appends to it, compressing files from the + command line or data from stdin. The gzip file is written to directly, to + avoid copying that file, in case it's large. Note that this results in the + unfriendly behavior that if gzappend fails, the gzip file is corrupted. + + This program was written to illustrate the use of the new Z_BLOCK option of + zlib 1.2.x's inflate() function. This option returns from inflate() at each + block boundary to facilitate locating and modifying the last block bit at + the start of the final deflate block. Also whether using Z_BLOCK or not, + another required feature of zlib 1.2.x is that inflate() now provides the + number of unusued bits in the last input byte used. gzappend will not work + with versions of zlib earlier than 1.2.1. + + gzappend first decompresses the gzip file internally, discarding all but + the last 32K of uncompressed data, and noting the location of the last block + bit and the number of unused bits in the last byte of the compressed data. + The gzip trailer containing the CRC-32 and length of the uncompressed data + is verified. This trailer will be later overwritten. + + Then the last block bit is cleared by seeking back in the file and rewriting + the byte that contains it. Seeking forward, the last byte of the compressed + data is saved along with the number of unused bits to initialize deflate. + + A deflate process is initialized, using the last 32K of the uncompressed + data from the gzip file to initialize the dictionary. If the total + uncompressed data was less than 32K, then all of it is used to initialize + the dictionary. The deflate output bit buffer is also initialized with the + last bits from the original deflate stream. From here on, the data to + append is simply compressed using deflate, and written to the gzip file. + When that is complete, the new CRC-32 and uncompressed length are written + as the trailer of the gzip file. + */ + +#include +#include +#include +#include +#include +#include "zlib.h" + +#define local static +#define LGCHUNK 14 +#define CHUNK (1U << LGCHUNK) +#define DSIZE 32768U + +/* print an error message and terminate with extreme prejudice */ +local void bye(char *msg1, char *msg2) +{ + fprintf(stderr, "gzappend error: %s%s\n", msg1, msg2); + exit(1); +} + +/* return the greatest common divisor of a and b using Euclid's algorithm, + modified to be fast when one argument much greater than the other, and + coded to avoid unnecessary swapping */ +local unsigned gcd(unsigned a, unsigned b) +{ + unsigned c; + + while (a && b) + if (a > b) { + c = b; + while (a - c >= c) + c <<= 1; + a -= c; + } + else { + c = a; + while (b - c >= c) + c <<= 1; + b -= c; + } + return a + b; +} + +/* rotate list[0..len-1] left by rot positions, in place */ +local void rotate(unsigned char *list, unsigned len, unsigned rot) +{ + unsigned char tmp; + unsigned cycles; + unsigned char *start, *last, *to, *from; + + /* normalize rot and handle degenerate cases */ + if (len < 2) return; + if (rot >= len) rot %= len; + if (rot == 0) return; + + /* pointer to last entry in list */ + last = list + (len - 1); + + /* do simple left shift by one */ + if (rot == 1) { + tmp = *list; + memcpy(list, list + 1, len - 1); + *last = tmp; + return; + } + + /* do simple right shift by one */ + if (rot == len - 1) { + tmp = *last; + memmove(list + 1, list, len - 1); + *list = tmp; + return; + } + + /* otherwise do rotate as a set of cycles in place */ + cycles = gcd(len, rot); /* number of cycles */ + do { + start = from = list + cycles; /* start index is arbitrary */ + tmp = *from; /* save entry to be overwritten */ + for (;;) { + to = from; /* next step in cycle */ + from += rot; /* go right rot positions */ + if (from > last) from -= len; /* (pointer better not wrap) */ + if (from == start) break; /* all but one shifted */ + *to = *from; /* shift left */ + } + *to = tmp; /* complete the circle */ + } while (--cycles); +} + +/* structure for gzip file read operations */ +typedef struct { + int fd; /* file descriptor */ + int size; /* 1 << size is bytes in buf */ + unsigned left; /* bytes available at next */ + unsigned char *buf; /* buffer */ + z_const unsigned char *next; /* next byte in buffer */ + char *name; /* file name for error messages */ +} file; + +/* reload buffer */ +local int readin(file *in) +{ + int len; + + len = read(in->fd, in->buf, 1 << in->size); + if (len == -1) bye("error reading ", in->name); + in->left = (unsigned)len; + in->next = in->buf; + return len; +} + +/* read from file in, exit if end-of-file */ +local int readmore(file *in) +{ + if (readin(in) == 0) bye("unexpected end of ", in->name); + return 0; +} + +#define read1(in) (in->left == 0 ? readmore(in) : 0, \ + in->left--, *(in->next)++) + +/* skip over n bytes of in */ +local void skip(file *in, unsigned n) +{ + unsigned bypass; + + if (n > in->left) { + n -= in->left; + bypass = n & ~((1U << in->size) - 1); + if (bypass) { + if (lseek(in->fd, (off_t)bypass, SEEK_CUR) == -1) + bye("seeking ", in->name); + n -= bypass; + } + readmore(in); + if (n > in->left) + bye("unexpected end of ", in->name); + } + in->left -= n; + in->next += n; +} + +/* read a four-byte unsigned integer, little-endian, from in */ +unsigned long read4(file *in) +{ + unsigned long val; + + val = read1(in); + val += (unsigned)read1(in) << 8; + val += (unsigned long)read1(in) << 16; + val += (unsigned long)read1(in) << 24; + return val; +} + +/* skip over gzip header */ +local void gzheader(file *in) +{ + int flags; + unsigned n; + + if (read1(in) != 31 || read1(in) != 139) bye(in->name, " not a gzip file"); + if (read1(in) != 8) bye("unknown compression method in", in->name); + flags = read1(in); + if (flags & 0xe0) bye("unknown header flags set in", in->name); + skip(in, 6); + if (flags & 4) { + n = read1(in); + n += (unsigned)(read1(in)) << 8; + skip(in, n); + } + if (flags & 8) while (read1(in) != 0) ; + if (flags & 16) while (read1(in) != 0) ; + if (flags & 2) skip(in, 2); +} + +/* decompress gzip file "name", return strm with a deflate stream ready to + continue compression of the data in the gzip file, and return a file + descriptor pointing to where to write the compressed data -- the deflate + stream is initialized to compress using level "level" */ +local int gzscan(char *name, z_stream *strm, int level) +{ + int ret, lastbit, left, full; + unsigned have; + unsigned long crc, tot; + unsigned char *window; + off_t lastoff, end; + file gz; + + /* open gzip file */ + gz.name = name; + gz.fd = open(name, O_RDWR, 0); + if (gz.fd == -1) bye("cannot open ", name); + gz.buf = malloc(CHUNK); + if (gz.buf == NULL) bye("out of memory", ""); + gz.size = LGCHUNK; + gz.left = 0; + + /* skip gzip header */ + gzheader(&gz); + + /* prepare to decompress */ + window = malloc(DSIZE); + if (window == NULL) bye("out of memory", ""); + strm->zalloc = Z_NULL; + strm->zfree = Z_NULL; + strm->opaque = Z_NULL; + ret = inflateInit2(strm, -15); + if (ret != Z_OK) bye("out of memory", " or library mismatch"); + + /* decompress the deflate stream, saving append information */ + lastbit = 0; + lastoff = lseek(gz.fd, 0L, SEEK_CUR) - gz.left; + left = 0; + strm->avail_in = gz.left; + strm->next_in = gz.next; + crc = crc32(0L, Z_NULL, 0); + have = full = 0; + do { + /* if needed, get more input */ + if (strm->avail_in == 0) { + readmore(&gz); + strm->avail_in = gz.left; + strm->next_in = gz.next; + } + + /* set up output to next available section of sliding window */ + strm->avail_out = DSIZE - have; + strm->next_out = window + have; + + /* inflate and check for errors */ + ret = inflate(strm, Z_BLOCK); + if (ret == Z_STREAM_ERROR) bye("internal stream error!", ""); + if (ret == Z_MEM_ERROR) bye("out of memory", ""); + if (ret == Z_DATA_ERROR) + bye("invalid compressed data--format violated in", name); + + /* update crc and sliding window pointer */ + crc = crc32(crc, window + have, DSIZE - have - strm->avail_out); + if (strm->avail_out) + have = DSIZE - strm->avail_out; + else { + have = 0; + full = 1; + } + + /* process end of block */ + if (strm->data_type & 128) { + if (strm->data_type & 64) + left = strm->data_type & 0x1f; + else { + lastbit = strm->data_type & 0x1f; + lastoff = lseek(gz.fd, 0L, SEEK_CUR) - strm->avail_in; + } + } + } while (ret != Z_STREAM_END); + inflateEnd(strm); + gz.left = strm->avail_in; + gz.next = strm->next_in; + + /* save the location of the end of the compressed data */ + end = lseek(gz.fd, 0L, SEEK_CUR) - gz.left; + + /* check gzip trailer and save total for deflate */ + if (crc != read4(&gz)) + bye("invalid compressed data--crc mismatch in ", name); + tot = strm->total_out; + if ((tot & 0xffffffffUL) != read4(&gz)) + bye("invalid compressed data--length mismatch in", name); + + /* if not at end of file, warn */ + if (gz.left || readin(&gz)) + fprintf(stderr, + "gzappend warning: junk at end of gzip file overwritten\n"); + + /* clear last block bit */ + lseek(gz.fd, lastoff - (lastbit != 0), SEEK_SET); + if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name); + *gz.buf = (unsigned char)(*gz.buf ^ (1 << ((8 - lastbit) & 7))); + lseek(gz.fd, -1L, SEEK_CUR); + if (write(gz.fd, gz.buf, 1) != 1) bye("writing after seek to ", name); + + /* if window wrapped, build dictionary from window by rotating */ + if (full) { + rotate(window, DSIZE, have); + have = DSIZE; + } + + /* set up deflate stream with window, crc, total_in, and leftover bits */ + ret = deflateInit2(strm, level, Z_DEFLATED, -15, 8, Z_DEFAULT_STRATEGY); + if (ret != Z_OK) bye("out of memory", ""); + deflateSetDictionary(strm, window, have); + strm->adler = crc; + strm->total_in = tot; + if (left) { + lseek(gz.fd, --end, SEEK_SET); + if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name); + deflatePrime(strm, 8 - left, *gz.buf); + } + lseek(gz.fd, end, SEEK_SET); + + /* clean up and return */ + free(window); + free(gz.buf); + return gz.fd; +} + +/* append file "name" to gzip file gd using deflate stream strm -- if last + is true, then finish off the deflate stream at the end */ +local void gztack(char *name, int gd, z_stream *strm, int last) +{ + int fd, len, ret; + unsigned left; + unsigned char *in, *out; + + /* open file to compress and append */ + fd = 0; + if (name != NULL) { + fd = open(name, O_RDONLY, 0); + if (fd == -1) + fprintf(stderr, "gzappend warning: %s not found, skipping ...\n", + name); + } + + /* allocate buffers */ + in = malloc(CHUNK); + out = malloc(CHUNK); + if (in == NULL || out == NULL) bye("out of memory", ""); + + /* compress input file and append to gzip file */ + do { + /* get more input */ + len = read(fd, in, CHUNK); + if (len == -1) { + fprintf(stderr, + "gzappend warning: error reading %s, skipping rest ...\n", + name); + len = 0; + } + strm->avail_in = (unsigned)len; + strm->next_in = in; + if (len) strm->adler = crc32(strm->adler, in, (unsigned)len); + + /* compress and write all available output */ + do { + strm->avail_out = CHUNK; + strm->next_out = out; + ret = deflate(strm, last && len == 0 ? Z_FINISH : Z_NO_FLUSH); + left = CHUNK - strm->avail_out; + while (left) { + len = write(gd, out + CHUNK - strm->avail_out - left, left); + if (len == -1) bye("writing gzip file", ""); + left -= (unsigned)len; + } + } while (strm->avail_out == 0 && ret != Z_STREAM_END); + } while (len != 0); + + /* write trailer after last entry */ + if (last) { + deflateEnd(strm); + out[0] = (unsigned char)(strm->adler); + out[1] = (unsigned char)(strm->adler >> 8); + out[2] = (unsigned char)(strm->adler >> 16); + out[3] = (unsigned char)(strm->adler >> 24); + out[4] = (unsigned char)(strm->total_in); + out[5] = (unsigned char)(strm->total_in >> 8); + out[6] = (unsigned char)(strm->total_in >> 16); + out[7] = (unsigned char)(strm->total_in >> 24); + len = 8; + do { + ret = write(gd, out + 8 - len, len); + if (ret == -1) bye("writing gzip file", ""); + len -= ret; + } while (len); + close(gd); + } + + /* clean up and return */ + free(out); + free(in); + if (fd > 0) close(fd); +} + +/* process the compression level option if present, scan the gzip file, and + append the specified files, or append the data from stdin if no other file + names are provided on the command line -- the gzip file must be writable + and seekable */ +int main(int argc, char **argv) +{ + int gd, level; + z_stream strm; + + /* ignore command name */ + argc--; argv++; + + /* provide usage if no arguments */ + if (*argv == NULL) { + printf( + "gzappend 1.2 (11 Oct 2012) Copyright (C) 2003, 2012 Mark Adler\n" + ); + printf( + "usage: gzappend [-level] file.gz [ addthis [ andthis ... ]]\n"); + return 0; + } + + /* set compression level */ + level = Z_DEFAULT_COMPRESSION; + if (argv[0][0] == '-') { + if (argv[0][1] < '0' || argv[0][1] > '9' || argv[0][2] != 0) + bye("invalid compression level", ""); + level = argv[0][1] - '0'; + if (*++argv == NULL) bye("no gzip file name after options", ""); + } + + /* prepare to append to gzip file */ + gd = gzscan(*argv++, &strm, level); + + /* append files on command line, or from stdin if none */ + if (*argv == NULL) + gztack(NULL, gd, &strm, 1); + else + do { + gztack(*argv, gd, &strm, argv[1] == NULL); + } while (*++argv != NULL); + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/examples/gzjoin.c b/src/SDL2/external/zlib-1.2.8/examples/gzjoin.c new file mode 100644 index 000000000..89e809844 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/examples/gzjoin.c @@ -0,0 +1,449 @@ +/* gzjoin -- command to join gzip files into one gzip file + + Copyright (C) 2004, 2005, 2012 Mark Adler, all rights reserved + version 1.2, 14 Aug 2012 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + +/* + * Change history: + * + * 1.0 11 Dec 2004 - First version + * 1.1 12 Jun 2005 - Changed ssize_t to long for portability + * 1.2 14 Aug 2012 - Clean up for z_const usage + */ + +/* + gzjoin takes one or more gzip files on the command line and writes out a + single gzip file that will uncompress to the concatenation of the + uncompressed data from the individual gzip files. gzjoin does this without + having to recompress any of the data and without having to calculate a new + crc32 for the concatenated uncompressed data. gzjoin does however have to + decompress all of the input data in order to find the bits in the compressed + data that need to be modified to concatenate the streams. + + gzjoin does not do an integrity check on the input gzip files other than + checking the gzip header and decompressing the compressed data. They are + otherwise assumed to be complete and correct. + + Each joint between gzip files removes at least 18 bytes of previous trailer + and subsequent header, and inserts an average of about three bytes to the + compressed data in order to connect the streams. The output gzip file + has a minimal ten-byte gzip header with no file name or modification time. + + This program was written to illustrate the use of the Z_BLOCK option of + inflate() and the crc32_combine() function. gzjoin will not compile with + versions of zlib earlier than 1.2.3. + */ + +#include /* fputs(), fprintf(), fwrite(), putc() */ +#include /* exit(), malloc(), free() */ +#include /* open() */ +#include /* close(), read(), lseek() */ +#include "zlib.h" + /* crc32(), crc32_combine(), inflateInit2(), inflate(), inflateEnd() */ + +#define local static + +/* exit with an error (return a value to allow use in an expression) */ +local int bail(char *why1, char *why2) +{ + fprintf(stderr, "gzjoin error: %s%s, output incomplete\n", why1, why2); + exit(1); + return 0; +} + +/* -- simple buffered file input with access to the buffer -- */ + +#define CHUNK 32768 /* must be a power of two and fit in unsigned */ + +/* bin buffered input file type */ +typedef struct { + char *name; /* name of file for error messages */ + int fd; /* file descriptor */ + unsigned left; /* bytes remaining at next */ + unsigned char *next; /* next byte to read */ + unsigned char *buf; /* allocated buffer of length CHUNK */ +} bin; + +/* close a buffered file and free allocated memory */ +local void bclose(bin *in) +{ + if (in != NULL) { + if (in->fd != -1) + close(in->fd); + if (in->buf != NULL) + free(in->buf); + free(in); + } +} + +/* open a buffered file for input, return a pointer to type bin, or NULL on + failure */ +local bin *bopen(char *name) +{ + bin *in; + + in = malloc(sizeof(bin)); + if (in == NULL) + return NULL; + in->buf = malloc(CHUNK); + in->fd = open(name, O_RDONLY, 0); + if (in->buf == NULL || in->fd == -1) { + bclose(in); + return NULL; + } + in->left = 0; + in->next = in->buf; + in->name = name; + return in; +} + +/* load buffer from file, return -1 on read error, 0 or 1 on success, with + 1 indicating that end-of-file was reached */ +local int bload(bin *in) +{ + long len; + + if (in == NULL) + return -1; + if (in->left != 0) + return 0; + in->next = in->buf; + do { + len = (long)read(in->fd, in->buf + in->left, CHUNK - in->left); + if (len < 0) + return -1; + in->left += (unsigned)len; + } while (len != 0 && in->left < CHUNK); + return len == 0 ? 1 : 0; +} + +/* get a byte from the file, bail if end of file */ +#define bget(in) (in->left ? 0 : bload(in), \ + in->left ? (in->left--, *(in->next)++) : \ + bail("unexpected end of file on ", in->name)) + +/* get a four-byte little-endian unsigned integer from file */ +local unsigned long bget4(bin *in) +{ + unsigned long val; + + val = bget(in); + val += (unsigned long)(bget(in)) << 8; + val += (unsigned long)(bget(in)) << 16; + val += (unsigned long)(bget(in)) << 24; + return val; +} + +/* skip bytes in file */ +local void bskip(bin *in, unsigned skip) +{ + /* check pointer */ + if (in == NULL) + return; + + /* easy case -- skip bytes in buffer */ + if (skip <= in->left) { + in->left -= skip; + in->next += skip; + return; + } + + /* skip what's in buffer, discard buffer contents */ + skip -= in->left; + in->left = 0; + + /* seek past multiples of CHUNK bytes */ + if (skip > CHUNK) { + unsigned left; + + left = skip & (CHUNK - 1); + if (left == 0) { + /* exact number of chunks: seek all the way minus one byte to check + for end-of-file with a read */ + lseek(in->fd, skip - 1, SEEK_CUR); + if (read(in->fd, in->buf, 1) != 1) + bail("unexpected end of file on ", in->name); + return; + } + + /* skip the integral chunks, update skip with remainder */ + lseek(in->fd, skip - left, SEEK_CUR); + skip = left; + } + + /* read more input and skip remainder */ + bload(in); + if (skip > in->left) + bail("unexpected end of file on ", in->name); + in->left -= skip; + in->next += skip; +} + +/* -- end of buffered input functions -- */ + +/* skip the gzip header from file in */ +local void gzhead(bin *in) +{ + int flags; + + /* verify gzip magic header and compression method */ + if (bget(in) != 0x1f || bget(in) != 0x8b || bget(in) != 8) + bail(in->name, " is not a valid gzip file"); + + /* get and verify flags */ + flags = bget(in); + if ((flags & 0xe0) != 0) + bail("unknown reserved bits set in ", in->name); + + /* skip modification time, extra flags, and os */ + bskip(in, 6); + + /* skip extra field if present */ + if (flags & 4) { + unsigned len; + + len = bget(in); + len += (unsigned)(bget(in)) << 8; + bskip(in, len); + } + + /* skip file name if present */ + if (flags & 8) + while (bget(in) != 0) + ; + + /* skip comment if present */ + if (flags & 16) + while (bget(in) != 0) + ; + + /* skip header crc if present */ + if (flags & 2) + bskip(in, 2); +} + +/* write a four-byte little-endian unsigned integer to out */ +local void put4(unsigned long val, FILE *out) +{ + putc(val & 0xff, out); + putc((val >> 8) & 0xff, out); + putc((val >> 16) & 0xff, out); + putc((val >> 24) & 0xff, out); +} + +/* Load up zlib stream from buffered input, bail if end of file */ +local void zpull(z_streamp strm, bin *in) +{ + if (in->left == 0) + bload(in); + if (in->left == 0) + bail("unexpected end of file on ", in->name); + strm->avail_in = in->left; + strm->next_in = in->next; +} + +/* Write header for gzip file to out and initialize trailer. */ +local void gzinit(unsigned long *crc, unsigned long *tot, FILE *out) +{ + fwrite("\x1f\x8b\x08\0\0\0\0\0\0\xff", 1, 10, out); + *crc = crc32(0L, Z_NULL, 0); + *tot = 0; +} + +/* Copy the compressed data from name, zeroing the last block bit of the last + block if clr is true, and adding empty blocks as needed to get to a byte + boundary. If clr is false, then the last block becomes the last block of + the output, and the gzip trailer is written. crc and tot maintains the + crc and length (modulo 2^32) of the output for the trailer. The resulting + gzip file is written to out. gzinit() must be called before the first call + of gzcopy() to write the gzip header and to initialize crc and tot. */ +local void gzcopy(char *name, int clr, unsigned long *crc, unsigned long *tot, + FILE *out) +{ + int ret; /* return value from zlib functions */ + int pos; /* where the "last block" bit is in byte */ + int last; /* true if processing the last block */ + bin *in; /* buffered input file */ + unsigned char *start; /* start of compressed data in buffer */ + unsigned char *junk; /* buffer for uncompressed data -- discarded */ + z_off_t len; /* length of uncompressed data (support > 4 GB) */ + z_stream strm; /* zlib inflate stream */ + + /* open gzip file and skip header */ + in = bopen(name); + if (in == NULL) + bail("could not open ", name); + gzhead(in); + + /* allocate buffer for uncompressed data and initialize raw inflate + stream */ + junk = malloc(CHUNK); + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, -15); + if (junk == NULL || ret != Z_OK) + bail("out of memory", ""); + + /* inflate and copy compressed data, clear last-block bit if requested */ + len = 0; + zpull(&strm, in); + start = in->next; + last = start[0] & 1; + if (last && clr) + start[0] &= ~1; + strm.avail_out = 0; + for (;;) { + /* if input used and output done, write used input and get more */ + if (strm.avail_in == 0 && strm.avail_out != 0) { + fwrite(start, 1, strm.next_in - start, out); + start = in->buf; + in->left = 0; + zpull(&strm, in); + } + + /* decompress -- return early when end-of-block reached */ + strm.avail_out = CHUNK; + strm.next_out = junk; + ret = inflate(&strm, Z_BLOCK); + switch (ret) { + case Z_MEM_ERROR: + bail("out of memory", ""); + case Z_DATA_ERROR: + bail("invalid compressed data in ", in->name); + } + + /* update length of uncompressed data */ + len += CHUNK - strm.avail_out; + + /* check for block boundary (only get this when block copied out) */ + if (strm.data_type & 128) { + /* if that was the last block, then done */ + if (last) + break; + + /* number of unused bits in last byte */ + pos = strm.data_type & 7; + + /* find the next last-block bit */ + if (pos != 0) { + /* next last-block bit is in last used byte */ + pos = 0x100 >> pos; + last = strm.next_in[-1] & pos; + if (last && clr) + in->buf[strm.next_in - in->buf - 1] &= ~pos; + } + else { + /* next last-block bit is in next unused byte */ + if (strm.avail_in == 0) { + /* don't have that byte yet -- get it */ + fwrite(start, 1, strm.next_in - start, out); + start = in->buf; + in->left = 0; + zpull(&strm, in); + } + last = strm.next_in[0] & 1; + if (last && clr) + in->buf[strm.next_in - in->buf] &= ~1; + } + } + } + + /* update buffer with unused input */ + in->left = strm.avail_in; + in->next = in->buf + (strm.next_in - in->buf); + + /* copy used input, write empty blocks to get to byte boundary */ + pos = strm.data_type & 7; + fwrite(start, 1, in->next - start - 1, out); + last = in->next[-1]; + if (pos == 0 || !clr) + /* already at byte boundary, or last file: write last byte */ + putc(last, out); + else { + /* append empty blocks to last byte */ + last &= ((0x100 >> pos) - 1); /* assure unused bits are zero */ + if (pos & 1) { + /* odd -- append an empty stored block */ + putc(last, out); + if (pos == 1) + putc(0, out); /* two more bits in block header */ + fwrite("\0\0\xff\xff", 1, 4, out); + } + else { + /* even -- append 1, 2, or 3 empty fixed blocks */ + switch (pos) { + case 6: + putc(last | 8, out); + last = 0; + case 4: + putc(last | 0x20, out); + last = 0; + case 2: + putc(last | 0x80, out); + putc(0, out); + } + } + } + + /* update crc and tot */ + *crc = crc32_combine(*crc, bget4(in), len); + *tot += (unsigned long)len; + + /* clean up */ + inflateEnd(&strm); + free(junk); + bclose(in); + + /* write trailer if this is the last gzip file */ + if (!clr) { + put4(*crc, out); + put4(*tot, out); + } +} + +/* join the gzip files on the command line, write result to stdout */ +int main(int argc, char **argv) +{ + unsigned long crc, tot; /* running crc and total uncompressed length */ + + /* skip command name */ + argc--; + argv++; + + /* show usage if no arguments */ + if (argc == 0) { + fputs("gzjoin usage: gzjoin f1.gz [f2.gz [f3.gz ...]] > fjoin.gz\n", + stderr); + return 0; + } + + /* join gzip files on command line and write to stdout */ + gzinit(&crc, &tot, stdout); + while (argc--) + gzcopy(*argv++, argc, &crc, &tot, stdout); + + /* done */ + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/examples/gzlog.c b/src/SDL2/external/zlib-1.2.8/examples/gzlog.c new file mode 100644 index 000000000..922f878dd --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/examples/gzlog.c @@ -0,0 +1,1059 @@ +/* + * gzlog.c + * Copyright (C) 2004, 2008, 2012 Mark Adler, all rights reserved + * For conditions of distribution and use, see copyright notice in gzlog.h + * version 2.2, 14 Aug 2012 + */ + +/* + gzlog provides a mechanism for frequently appending short strings to a gzip + file that is efficient both in execution time and compression ratio. The + strategy is to write the short strings in an uncompressed form to the end of + the gzip file, only compressing when the amount of uncompressed data has + reached a given threshold. + + gzlog also provides protection against interruptions in the process due to + system crashes. The status of the operation is recorded in an extra field + in the gzip file, and is only updated once the gzip file is brought to a + valid state. The last data to be appended or compressed is saved in an + auxiliary file, so that if the operation is interrupted, it can be completed + the next time an append operation is attempted. + + gzlog maintains another auxiliary file with the last 32K of data from the + compressed portion, which is preloaded for the compression of the subsequent + data. This minimizes the impact to the compression ratio of appending. + */ + +/* + Operations Concept: + + Files (log name "foo"): + foo.gz -- gzip file with the complete log + foo.add -- last message to append or last data to compress + foo.dict -- dictionary of the last 32K of data for next compression + foo.temp -- temporary dictionary file for compression after this one + foo.lock -- lock file for reading and writing the other files + foo.repairs -- log file for log file recovery operations (not compressed) + + gzip file structure: + - fixed-length (no file name) header with extra field (see below) + - compressed data ending initially with empty stored block + - uncompressed data filling out originally empty stored block and + subsequent stored blocks as needed (16K max each) + - gzip trailer + - no junk at end (no other gzip streams) + + When appending data, the information in the first three items above plus the + foo.add file are sufficient to recover an interrupted append operation. The + extra field has the necessary information to restore the start of the last + stored block and determine where to append the data in the foo.add file, as + well as the crc and length of the gzip data before the append operation. + + The foo.add file is created before the gzip file is marked for append, and + deleted after the gzip file is marked as complete. So if the append + operation is interrupted, the data to add will still be there. If due to + some external force, the foo.add file gets deleted between when the append + operation was interrupted and when recovery is attempted, the gzip file will + still be restored, but without the appended data. + + When compressing data, the information in the first two items above plus the + foo.add file are sufficient to recover an interrupted compress operation. + The extra field has the necessary information to find the end of the + compressed data, and contains both the crc and length of just the compressed + data and of the complete set of data including the contents of the foo.add + file. + + Again, the foo.add file is maintained during the compress operation in case + of an interruption. If in the unlikely event the foo.add file with the data + to be compressed is missing due to some external force, a gzip file with + just the previous compressed data will be reconstructed. In this case, all + of the data that was to be compressed is lost (approximately one megabyte). + This will not occur if all that happened was an interruption of the compress + operation. + + The third state that is marked is the replacement of the old dictionary with + the new dictionary after a compress operation. Once compression is + complete, the gzip file is marked as being in the replace state. This + completes the gzip file, so an interrupt after being so marked does not + result in recompression. Then the dictionary file is replaced, and the gzip + file is marked as completed. This state prevents the possibility of + restarting compression with the wrong dictionary file. + + All three operations are wrapped by a lock/unlock procedure. In order to + gain exclusive access to the log files, first a foo.lock file must be + exclusively created. When all operations are complete, the lock is + released by deleting the foo.lock file. If when attempting to create the + lock file, it already exists and the modify time of the lock file is more + than five minutes old (set by the PATIENCE define below), then the old + lock file is considered stale and deleted, and the exclusive creation of + the lock file is retried. To assure that there are no false assessments + of the staleness of the lock file, the operations periodically touch the + lock file to update the modified date. + + Following is the definition of the extra field with all of the information + required to enable the above append and compress operations and their + recovery if interrupted. Multi-byte values are stored little endian + (consistent with the gzip format). File pointers are eight bytes long. + The crc's and lengths for the gzip trailer are four bytes long. (Note that + the length at the end of a gzip file is used for error checking only, and + for large files is actually the length modulo 2^32.) The stored block + length is two bytes long. The gzip extra field two-byte identification is + "ap" for append. It is assumed that writing the extra field to the file is + an "atomic" operation. That is, either all of the extra field is written + to the file, or none of it is, if the operation is interrupted right at the + point of updating the extra field. This is a reasonable assumption, since + the extra field is within the first 52 bytes of the file, which is smaller + than any expected block size for a mass storage device (usually 512 bytes or + larger). + + Extra field (35 bytes): + - Pointer to first stored block length -- this points to the two-byte length + of the first stored block, which is followed by the two-byte, one's + complement of that length. The stored block length is preceded by the + three-bit header of the stored block, which is the actual start of the + stored block in the deflate format. See the bit offset field below. + - Pointer to the last stored block length. This is the same as above, but + for the last stored block of the uncompressed data in the gzip file. + Initially this is the same as the first stored block length pointer. + When the stored block gets to 16K (see the MAX_STORE define), then a new + stored block as added, at which point the last stored block length pointer + is different from the first stored block length pointer. When they are + different, the first bit of the last stored block header is eight bits, or + one byte back from the block length. + - Compressed data crc and length. This is the crc and length of the data + that is in the compressed portion of the deflate stream. These are used + only in the event that the foo.add file containing the data to compress is + lost after a compress operation is interrupted. + - Total data crc and length. This is the crc and length of all of the data + stored in the gzip file, compressed and uncompressed. It is used to + reconstruct the gzip trailer when compressing, as well as when recovering + interrupted operations. + - Final stored block length. This is used to quickly find where to append, + and allows the restoration of the original final stored block state when + an append operation is interrupted. + - First stored block start as the number of bits back from the final stored + block first length byte. This value is in the range of 3..10, and is + stored as the low three bits of the final byte of the extra field after + subtracting three (0..7). This allows the last-block bit of the stored + block header to be updated when a new stored block is added, for the case + when the first stored block and the last stored block are the same. (When + they are different, the numbers of bits back is known to be eight.) This + also allows for new compressed data to be appended to the old compressed + data in the compress operation, overwriting the previous first stored + block, or for the compressed data to be terminated and a valid gzip file + reconstructed on the off chance that a compression operation was + interrupted and the data to compress in the foo.add file was deleted. + - The operation in process. This is the next two bits in the last byte (the + bits under the mask 0x18). The are interpreted as 0: nothing in process, + 1: append in process, 2: compress in process, 3: replace in process. + - The top three bits of the last byte in the extra field are reserved and + are currently set to zero. + + Main procedure: + - Exclusively create the foo.lock file using the O_CREAT and O_EXCL modes of + the system open() call. If the modify time of an existing lock file is + more than PATIENCE seconds old, then the lock file is deleted and the + exclusive create is retried. + - Load the extra field from the foo.gz file, and see if an operation was in + progress but not completed. If so, apply the recovery procedure below. + - Perform the append procedure with the provided data. + - If the uncompressed data in the foo.gz file is 1MB or more, apply the + compress procedure. + - Delete the foo.lock file. + + Append procedure: + - Put what to append in the foo.add file so that the operation can be + restarted if this procedure is interrupted. + - Mark the foo.gz extra field with the append operation in progress. + + Restore the original last-block bit and stored block length of the last + stored block from the information in the extra field, in case a previous + append operation was interrupted. + - Append the provided data to the last stored block, creating new stored + blocks as needed and updating the stored blocks last-block bits and + lengths. + - Update the crc and length with the new data, and write the gzip trailer. + - Write over the extra field (with a single write operation) with the new + pointers, lengths, and crc's, and mark the gzip file as not in process. + Though there is still a foo.add file, it will be ignored since nothing + is in process. If a foo.add file is leftover from a previously + completed operation, it is truncated when writing new data to it. + - Delete the foo.add file. + + Compress and replace procedures: + - Read all of the uncompressed data in the stored blocks in foo.gz and write + it to foo.add. Also write foo.temp with the last 32K of that data to + provide a dictionary for the next invocation of this procedure. + - Rewrite the extra field marking foo.gz with a compression in process. + * If there is no data provided to compress (due to a missing foo.add file + when recovering), reconstruct and truncate the foo.gz file to contain + only the previous compressed data and proceed to the step after the next + one. Otherwise ... + - Compress the data with the dictionary in foo.dict, and write to the + foo.gz file starting at the bit immediately following the last previously + compressed block. If there is no foo.dict, proceed anyway with the + compression at slightly reduced efficiency. (For the foo.dict file to be + missing requires some external failure beyond simply the interruption of + a compress operation.) During this process, the foo.lock file is + periodically touched to assure that that file is not considered stale by + another process before we're done. The deflation is terminated with a + non-last empty static block (10 bits long), that is then located and + written over by a last-bit-set empty stored block. + - Append the crc and length of the data in the gzip file (previously + calculated during the append operations). + - Write over the extra field with the updated stored block offsets, bits + back, crc's, and lengths, and mark foo.gz as in process for a replacement + of the dictionary. + @ Delete the foo.add file. + - Replace foo.dict with foo.temp. + - Write over the extra field, marking foo.gz as complete. + + Recovery procedure: + - If not a replace recovery, read in the foo.add file, and provide that data + to the appropriate recovery below. If there is no foo.add file, provide + a zero data length to the recovery. In that case, the append recovery + restores the foo.gz to the previous compressed + uncompressed data state. + For the the compress recovery, a missing foo.add file results in foo.gz + being restored to the previous compressed-only data state. + - Append recovery: + - Pick up append at + step above + - Compress recovery: + - Pick up compress at * step above + - Replace recovery: + - Pick up compress at @ step above + - Log the repair with a date stamp in foo.repairs + */ + +#include +#include /* rename, fopen, fprintf, fclose */ +#include /* malloc, free */ +#include /* strlen, strrchr, strcpy, strncpy, strcmp */ +#include /* open */ +#include /* lseek, read, write, close, unlink, sleep, */ + /* ftruncate, fsync */ +#include /* errno */ +#include /* time, ctime */ +#include /* stat */ +#include /* utimes */ +#include "zlib.h" /* crc32 */ + +#include "gzlog.h" /* header for external access */ + +#define local static +typedef unsigned int uint; +typedef unsigned long ulong; + +/* Macro for debugging to deterministically force recovery operations */ +#ifdef DEBUG + #include /* longjmp */ + jmp_buf gzlog_jump; /* where to go back to */ + int gzlog_bail = 0; /* which point to bail at (1..8) */ + int gzlog_count = -1; /* number of times through to wait */ +# define BAIL(n) do { if (n == gzlog_bail && gzlog_count-- == 0) \ + longjmp(gzlog_jump, gzlog_bail); } while (0) +#else +# define BAIL(n) +#endif + +/* how old the lock file can be in seconds before considering it stale */ +#define PATIENCE 300 + +/* maximum stored block size in Kbytes -- must be in 1..63 */ +#define MAX_STORE 16 + +/* number of stored Kbytes to trigger compression (must be >= 32 to allow + dictionary construction, and <= 204 * MAX_STORE, in order for >> 10 to + discard the stored block headers contribution of five bytes each) */ +#define TRIGGER 1024 + +/* size of a deflate dictionary (this cannot be changed) */ +#define DICT 32768U + +/* values for the operation (2 bits) */ +#define NO_OP 0 +#define APPEND_OP 1 +#define COMPRESS_OP 2 +#define REPLACE_OP 3 + +/* macros to extract little-endian integers from an unsigned byte buffer */ +#define PULL2(p) ((p)[0]+((uint)((p)[1])<<8)) +#define PULL4(p) (PULL2(p)+((ulong)PULL2(p+2)<<16)) +#define PULL8(p) (PULL4(p)+((off_t)PULL4(p+4)<<32)) + +/* macros to store integers into a byte buffer in little-endian order */ +#define PUT2(p,a) do {(p)[0]=a;(p)[1]=(a)>>8;} while(0) +#define PUT4(p,a) do {PUT2(p,a);PUT2(p+2,a>>16);} while(0) +#define PUT8(p,a) do {PUT4(p,a);PUT4(p+4,a>>32);} while(0) + +/* internal structure for log information */ +#define LOGID "\106\035\172" /* should be three non-zero characters */ +struct log { + char id[4]; /* contains LOGID to detect inadvertent overwrites */ + int fd; /* file descriptor for .gz file, opened read/write */ + char *path; /* allocated path, e.g. "/var/log/foo" or "foo" */ + char *end; /* end of path, for appending suffices such as ".gz" */ + off_t first; /* offset of first stored block first length byte */ + int back; /* location of first block id in bits back from first */ + uint stored; /* bytes currently in last stored block */ + off_t last; /* offset of last stored block first length byte */ + ulong ccrc; /* crc of compressed data */ + ulong clen; /* length (modulo 2^32) of compressed data */ + ulong tcrc; /* crc of total data */ + ulong tlen; /* length (modulo 2^32) of total data */ + time_t lock; /* last modify time of our lock file */ +}; + +/* gzip header for gzlog */ +local unsigned char log_gzhead[] = { + 0x1f, 0x8b, /* magic gzip id */ + 8, /* compression method is deflate */ + 4, /* there is an extra field (no file name) */ + 0, 0, 0, 0, /* no modification time provided */ + 0, 0xff, /* no extra flags, no OS specified */ + 39, 0, 'a', 'p', 35, 0 /* extra field with "ap" subfield */ + /* 35 is EXTRA, 39 is EXTRA + 4 */ +}; + +#define HEAD sizeof(log_gzhead) /* should be 16 */ + +/* initial gzip extra field content (52 == HEAD + EXTRA + 1) */ +local unsigned char log_gzext[] = { + 52, 0, 0, 0, 0, 0, 0, 0, /* offset of first stored block length */ + 52, 0, 0, 0, 0, 0, 0, 0, /* offset of last stored block length */ + 0, 0, 0, 0, 0, 0, 0, 0, /* compressed data crc and length */ + 0, 0, 0, 0, 0, 0, 0, 0, /* total data crc and length */ + 0, 0, /* final stored block data length */ + 5 /* op is NO_OP, last bit 8 bits back */ +}; + +#define EXTRA sizeof(log_gzext) /* should be 35 */ + +/* initial gzip data and trailer */ +local unsigned char log_gzbody[] = { + 1, 0, 0, 0xff, 0xff, /* empty stored block (last) */ + 0, 0, 0, 0, /* crc */ + 0, 0, 0, 0 /* uncompressed length */ +}; + +#define BODY sizeof(log_gzbody) + +/* Exclusively create foo.lock in order to negotiate exclusive access to the + foo.* files. If the modify time of an existing lock file is greater than + PATIENCE seconds in the past, then consider the lock file to have been + abandoned, delete it, and try the exclusive create again. Save the lock + file modify time for verification of ownership. Return 0 on success, or -1 + on failure, usually due to an access restriction or invalid path. Note that + if stat() or unlink() fails, it may be due to another process noticing the + abandoned lock file a smidge sooner and deleting it, so those are not + flagged as an error. */ +local int log_lock(struct log *log) +{ + int fd; + struct stat st; + + strcpy(log->end, ".lock"); + while ((fd = open(log->path, O_CREAT | O_EXCL, 0644)) < 0) { + if (errno != EEXIST) + return -1; + if (stat(log->path, &st) == 0 && time(NULL) - st.st_mtime > PATIENCE) { + unlink(log->path); + continue; + } + sleep(2); /* relinquish the CPU for two seconds while waiting */ + } + close(fd); + if (stat(log->path, &st) == 0) + log->lock = st.st_mtime; + return 0; +} + +/* Update the modify time of the lock file to now, in order to prevent another + task from thinking that the lock is stale. Save the lock file modify time + for verification of ownership. */ +local void log_touch(struct log *log) +{ + struct stat st; + + strcpy(log->end, ".lock"); + utimes(log->path, NULL); + if (stat(log->path, &st) == 0) + log->lock = st.st_mtime; +} + +/* Check the log file modify time against what is expected. Return true if + this is not our lock. If it is our lock, touch it to keep it. */ +local int log_check(struct log *log) +{ + struct stat st; + + strcpy(log->end, ".lock"); + if (stat(log->path, &st) || st.st_mtime != log->lock) + return 1; + log_touch(log); + return 0; +} + +/* Unlock a previously acquired lock, but only if it's ours. */ +local void log_unlock(struct log *log) +{ + if (log_check(log)) + return; + strcpy(log->end, ".lock"); + unlink(log->path); + log->lock = 0; +} + +/* Check the gzip header and read in the extra field, filling in the values in + the log structure. Return op on success or -1 if the gzip header was not as + expected. op is the current operation in progress last written to the extra + field. This assumes that the gzip file has already been opened, with the + file descriptor log->fd. */ +local int log_head(struct log *log) +{ + int op; + unsigned char buf[HEAD + EXTRA]; + + if (lseek(log->fd, 0, SEEK_SET) < 0 || + read(log->fd, buf, HEAD + EXTRA) != HEAD + EXTRA || + memcmp(buf, log_gzhead, HEAD)) { + return -1; + } + log->first = PULL8(buf + HEAD); + log->last = PULL8(buf + HEAD + 8); + log->ccrc = PULL4(buf + HEAD + 16); + log->clen = PULL4(buf + HEAD + 20); + log->tcrc = PULL4(buf + HEAD + 24); + log->tlen = PULL4(buf + HEAD + 28); + log->stored = PULL2(buf + HEAD + 32); + log->back = 3 + (buf[HEAD + 34] & 7); + op = (buf[HEAD + 34] >> 3) & 3; + return op; +} + +/* Write over the extra field contents, marking the operation as op. Use fsync + to assure that the device is written to, and in the requested order. This + operation, and only this operation, is assumed to be atomic in order to + assure that the log is recoverable in the event of an interruption at any + point in the process. Return -1 if the write to foo.gz failed. */ +local int log_mark(struct log *log, int op) +{ + int ret; + unsigned char ext[EXTRA]; + + PUT8(ext, log->first); + PUT8(ext + 8, log->last); + PUT4(ext + 16, log->ccrc); + PUT4(ext + 20, log->clen); + PUT4(ext + 24, log->tcrc); + PUT4(ext + 28, log->tlen); + PUT2(ext + 32, log->stored); + ext[34] = log->back - 3 + (op << 3); + fsync(log->fd); + ret = lseek(log->fd, HEAD, SEEK_SET) < 0 || + write(log->fd, ext, EXTRA) != EXTRA ? -1 : 0; + fsync(log->fd); + return ret; +} + +/* Rewrite the last block header bits and subsequent zero bits to get to a byte + boundary, setting the last block bit if last is true, and then write the + remainder of the stored block header (length and one's complement). Leave + the file pointer after the end of the last stored block data. Return -1 if + there is a read or write failure on the foo.gz file */ +local int log_last(struct log *log, int last) +{ + int back, len, mask; + unsigned char buf[6]; + + /* determine the locations of the bytes and bits to modify */ + back = log->last == log->first ? log->back : 8; + len = back > 8 ? 2 : 1; /* bytes back from log->last */ + mask = 0x80 >> ((back - 1) & 7); /* mask for block last-bit */ + + /* get the byte to modify (one or two back) into buf[0] -- don't need to + read the byte if the last-bit is eight bits back, since in that case + the entire byte will be modified */ + buf[0] = 0; + if (back != 8 && (lseek(log->fd, log->last - len, SEEK_SET) < 0 || + read(log->fd, buf, 1) != 1)) + return -1; + + /* change the last-bit of the last stored block as requested -- note + that all bits above the last-bit are set to zero, per the type bits + of a stored block being 00 and per the convention that the bits to + bring the stream to a byte boundary are also zeros */ + buf[1] = 0; + buf[2 - len] = (*buf & (mask - 1)) + (last ? mask : 0); + + /* write the modified stored block header and lengths, move the file + pointer to after the last stored block data */ + PUT2(buf + 2, log->stored); + PUT2(buf + 4, log->stored ^ 0xffff); + return lseek(log->fd, log->last - len, SEEK_SET) < 0 || + write(log->fd, buf + 2 - len, len + 4) != len + 4 || + lseek(log->fd, log->stored, SEEK_CUR) < 0 ? -1 : 0; +} + +/* Append len bytes from data to the locked and open log file. len may be zero + if recovering and no .add file was found. In that case, the previous state + of the foo.gz file is restored. The data is appended uncompressed in + deflate stored blocks. Return -1 if there was an error reading or writing + the foo.gz file. */ +local int log_append(struct log *log, unsigned char *data, size_t len) +{ + uint put; + off_t end; + unsigned char buf[8]; + + /* set the last block last-bit and length, in case recovering an + interrupted append, then position the file pointer to append to the + block */ + if (log_last(log, 1)) + return -1; + + /* append, adding stored blocks and updating the offset of the last stored + block as needed, and update the total crc and length */ + while (len) { + /* append as much as we can to the last block */ + put = (MAX_STORE << 10) - log->stored; + if (put > len) + put = (uint)len; + if (put) { + if (write(log->fd, data, put) != put) + return -1; + BAIL(1); + log->tcrc = crc32(log->tcrc, data, put); + log->tlen += put; + log->stored += put; + data += put; + len -= put; + } + + /* if we need to, add a new empty stored block */ + if (len) { + /* mark current block as not last */ + if (log_last(log, 0)) + return -1; + + /* point to new, empty stored block */ + log->last += 4 + log->stored + 1; + log->stored = 0; + } + + /* mark last block as last, update its length */ + if (log_last(log, 1)) + return -1; + BAIL(2); + } + + /* write the new crc and length trailer, and truncate just in case (could + be recovering from partial append with a missing foo.add file) */ + PUT4(buf, log->tcrc); + PUT4(buf + 4, log->tlen); + if (write(log->fd, buf, 8) != 8 || + (end = lseek(log->fd, 0, SEEK_CUR)) < 0 || ftruncate(log->fd, end)) + return -1; + + /* write the extra field, marking the log file as done, delete .add file */ + if (log_mark(log, NO_OP)) + return -1; + strcpy(log->end, ".add"); + unlink(log->path); /* ignore error, since may not exist */ + return 0; +} + +/* Replace the foo.dict file with the foo.temp file. Also delete the foo.add + file, since the compress operation may have been interrupted before that was + done. Returns 1 if memory could not be allocated, or -1 if reading or + writing foo.gz fails, or if the rename fails for some reason other than + foo.temp not existing. foo.temp not existing is a permitted error, since + the replace operation may have been interrupted after the rename is done, + but before foo.gz is marked as complete. */ +local int log_replace(struct log *log) +{ + int ret; + char *dest; + + /* delete foo.add file */ + strcpy(log->end, ".add"); + unlink(log->path); /* ignore error, since may not exist */ + BAIL(3); + + /* rename foo.name to foo.dict, replacing foo.dict if it exists */ + strcpy(log->end, ".dict"); + dest = malloc(strlen(log->path) + 1); + if (dest == NULL) + return -2; + strcpy(dest, log->path); + strcpy(log->end, ".temp"); + ret = rename(log->path, dest); + free(dest); + if (ret && errno != ENOENT) + return -1; + BAIL(4); + + /* mark the foo.gz file as done */ + return log_mark(log, NO_OP); +} + +/* Compress the len bytes at data and append the compressed data to the + foo.gz deflate data immediately after the previous compressed data. This + overwrites the previous uncompressed data, which was stored in foo.add + and is the data provided in data[0..len-1]. If this operation is + interrupted, it picks up at the start of this routine, with the foo.add + file read in again. If there is no data to compress (len == 0), then we + simply terminate the foo.gz file after the previously compressed data, + appending a final empty stored block and the gzip trailer. Return -1 if + reading or writing the log.gz file failed, or -2 if there was a memory + allocation failure. */ +local int log_compress(struct log *log, unsigned char *data, size_t len) +{ + int fd; + uint got, max; + ssize_t dict; + off_t end; + z_stream strm; + unsigned char buf[DICT]; + + /* compress and append compressed data */ + if (len) { + /* set up for deflate, allocating memory */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + if (deflateInit2(&strm, Z_DEFAULT_COMPRESSION, Z_DEFLATED, -15, 8, + Z_DEFAULT_STRATEGY) != Z_OK) + return -2; + + /* read in dictionary (last 32K of data that was compressed) */ + strcpy(log->end, ".dict"); + fd = open(log->path, O_RDONLY, 0); + if (fd >= 0) { + dict = read(fd, buf, DICT); + close(fd); + if (dict < 0) { + deflateEnd(&strm); + return -1; + } + if (dict) + deflateSetDictionary(&strm, buf, (uint)dict); + } + log_touch(log); + + /* prime deflate with last bits of previous block, position write + pointer to write those bits and overwrite what follows */ + if (lseek(log->fd, log->first - (log->back > 8 ? 2 : 1), + SEEK_SET) < 0 || + read(log->fd, buf, 1) != 1 || lseek(log->fd, -1, SEEK_CUR) < 0) { + deflateEnd(&strm); + return -1; + } + deflatePrime(&strm, (8 - log->back) & 7, *buf); + + /* compress, finishing with a partial non-last empty static block */ + strm.next_in = data; + max = (((uint)0 - 1) >> 1) + 1; /* in case int smaller than size_t */ + do { + strm.avail_in = len > max ? max : (uint)len; + len -= strm.avail_in; + do { + strm.avail_out = DICT; + strm.next_out = buf; + deflate(&strm, len ? Z_NO_FLUSH : Z_PARTIAL_FLUSH); + got = DICT - strm.avail_out; + if (got && write(log->fd, buf, got) != got) { + deflateEnd(&strm); + return -1; + } + log_touch(log); + } while (strm.avail_out == 0); + } while (len); + deflateEnd(&strm); + BAIL(5); + + /* find start of empty static block -- scanning backwards the first one + bit is the second bit of the block, if the last byte is zero, then + we know the byte before that has a one in the top bit, since an + empty static block is ten bits long */ + if ((log->first = lseek(log->fd, -1, SEEK_CUR)) < 0 || + read(log->fd, buf, 1) != 1) + return -1; + log->first++; + if (*buf) { + log->back = 1; + while ((*buf & ((uint)1 << (8 - log->back++))) == 0) + ; /* guaranteed to terminate, since *buf != 0 */ + } + else + log->back = 10; + + /* update compressed crc and length */ + log->ccrc = log->tcrc; + log->clen = log->tlen; + } + else { + /* no data to compress -- fix up existing gzip stream */ + log->tcrc = log->ccrc; + log->tlen = log->clen; + } + + /* complete and truncate gzip stream */ + log->last = log->first; + log->stored = 0; + PUT4(buf, log->tcrc); + PUT4(buf + 4, log->tlen); + if (log_last(log, 1) || write(log->fd, buf, 8) != 8 || + (end = lseek(log->fd, 0, SEEK_CUR)) < 0 || ftruncate(log->fd, end)) + return -1; + BAIL(6); + + /* mark as being in the replace operation */ + if (log_mark(log, REPLACE_OP)) + return -1; + + /* execute the replace operation and mark the file as done */ + return log_replace(log); +} + +/* log a repair record to the .repairs file */ +local void log_log(struct log *log, int op, char *record) +{ + time_t now; + FILE *rec; + + now = time(NULL); + strcpy(log->end, ".repairs"); + rec = fopen(log->path, "a"); + if (rec == NULL) + return; + fprintf(rec, "%.24s %s recovery: %s\n", ctime(&now), op == APPEND_OP ? + "append" : (op == COMPRESS_OP ? "compress" : "replace"), record); + fclose(rec); + return; +} + +/* Recover the interrupted operation op. First read foo.add for recovering an + append or compress operation. Return -1 if there was an error reading or + writing foo.gz or reading an existing foo.add, or -2 if there was a memory + allocation failure. */ +local int log_recover(struct log *log, int op) +{ + int fd, ret = 0; + unsigned char *data = NULL; + size_t len = 0; + struct stat st; + + /* log recovery */ + log_log(log, op, "start"); + + /* load foo.add file if expected and present */ + if (op == APPEND_OP || op == COMPRESS_OP) { + strcpy(log->end, ".add"); + if (stat(log->path, &st) == 0 && st.st_size) { + len = (size_t)(st.st_size); + if ((off_t)len != st.st_size || + (data = malloc(st.st_size)) == NULL) { + log_log(log, op, "allocation failure"); + return -2; + } + if ((fd = open(log->path, O_RDONLY, 0)) < 0) { + log_log(log, op, ".add file read failure"); + return -1; + } + ret = (size_t)read(fd, data, len) != len; + close(fd); + if (ret) { + log_log(log, op, ".add file read failure"); + return -1; + } + log_log(log, op, "loaded .add file"); + } + else + log_log(log, op, "missing .add file!"); + } + + /* recover the interrupted operation */ + switch (op) { + case APPEND_OP: + ret = log_append(log, data, len); + break; + case COMPRESS_OP: + ret = log_compress(log, data, len); + break; + case REPLACE_OP: + ret = log_replace(log); + } + + /* log status */ + log_log(log, op, ret ? "failure" : "complete"); + + /* clean up */ + if (data != NULL) + free(data); + return ret; +} + +/* Close the foo.gz file (if open) and release the lock. */ +local void log_close(struct log *log) +{ + if (log->fd >= 0) + close(log->fd); + log->fd = -1; + log_unlock(log); +} + +/* Open foo.gz, verify the header, and load the extra field contents, after + first creating the foo.lock file to gain exclusive access to the foo.* + files. If foo.gz does not exist or is empty, then write the initial header, + extra, and body content of an empty foo.gz log file. If there is an error + creating the lock file due to access restrictions, or an error reading or + writing the foo.gz file, or if the foo.gz file is not a proper log file for + this object (e.g. not a gzip file or does not contain the expected extra + field), then return true. If there is an error, the lock is released. + Otherwise, the lock is left in place. */ +local int log_open(struct log *log) +{ + int op; + + /* release open file resource if left over -- can occur if lock lost + between gzlog_open() and gzlog_write() */ + if (log->fd >= 0) + close(log->fd); + log->fd = -1; + + /* negotiate exclusive access */ + if (log_lock(log) < 0) + return -1; + + /* open the log file, foo.gz */ + strcpy(log->end, ".gz"); + log->fd = open(log->path, O_RDWR | O_CREAT, 0644); + if (log->fd < 0) { + log_close(log); + return -1; + } + + /* if new, initialize foo.gz with an empty log, delete old dictionary */ + if (lseek(log->fd, 0, SEEK_END) == 0) { + if (write(log->fd, log_gzhead, HEAD) != HEAD || + write(log->fd, log_gzext, EXTRA) != EXTRA || + write(log->fd, log_gzbody, BODY) != BODY) { + log_close(log); + return -1; + } + strcpy(log->end, ".dict"); + unlink(log->path); + } + + /* verify log file and load extra field information */ + if ((op = log_head(log)) < 0) { + log_close(log); + return -1; + } + + /* check for interrupted process and if so, recover */ + if (op != NO_OP && log_recover(log, op)) { + log_close(log); + return -1; + } + + /* touch the lock file to prevent another process from grabbing it */ + log_touch(log); + return 0; +} + +/* See gzlog.h for the description of the external methods below */ +gzlog *gzlog_open(char *path) +{ + size_t n; + struct log *log; + + /* check arguments */ + if (path == NULL || *path == 0) + return NULL; + + /* allocate and initialize log structure */ + log = malloc(sizeof(struct log)); + if (log == NULL) + return NULL; + strcpy(log->id, LOGID); + log->fd = -1; + + /* save path and end of path for name construction */ + n = strlen(path); + log->path = malloc(n + 9); /* allow for ".repairs" */ + if (log->path == NULL) { + free(log); + return NULL; + } + strcpy(log->path, path); + log->end = log->path + n; + + /* gain exclusive access and verify log file -- may perform a + recovery operation if needed */ + if (log_open(log)) { + free(log->path); + free(log); + return NULL; + } + + /* return pointer to log structure */ + return log; +} + +/* gzlog_compress() return values: + 0: all good + -1: file i/o error (usually access issue) + -2: memory allocation failure + -3: invalid log pointer argument */ +int gzlog_compress(gzlog *logd) +{ + int fd, ret; + uint block; + size_t len, next; + unsigned char *data, buf[5]; + struct log *log = logd; + + /* check arguments */ + if (log == NULL || strcmp(log->id, LOGID)) + return -3; + + /* see if we lost the lock -- if so get it again and reload the extra + field information (it probably changed), recover last operation if + necessary */ + if (log_check(log) && log_open(log)) + return -1; + + /* create space for uncompressed data */ + len = ((size_t)(log->last - log->first) & ~(((size_t)1 << 10) - 1)) + + log->stored; + if ((data = malloc(len)) == NULL) + return -2; + + /* do statement here is just a cheap trick for error handling */ + do { + /* read in the uncompressed data */ + if (lseek(log->fd, log->first - 1, SEEK_SET) < 0) + break; + next = 0; + while (next < len) { + if (read(log->fd, buf, 5) != 5) + break; + block = PULL2(buf + 1); + if (next + block > len || + read(log->fd, (char *)data + next, block) != block) + break; + next += block; + } + if (lseek(log->fd, 0, SEEK_CUR) != log->last + 4 + log->stored) + break; + log_touch(log); + + /* write the uncompressed data to the .add file */ + strcpy(log->end, ".add"); + fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644); + if (fd < 0) + break; + ret = (size_t)write(fd, data, len) != len; + if (ret | close(fd)) + break; + log_touch(log); + + /* write the dictionary for the next compress to the .temp file */ + strcpy(log->end, ".temp"); + fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644); + if (fd < 0) + break; + next = DICT > len ? len : DICT; + ret = (size_t)write(fd, (char *)data + len - next, next) != next; + if (ret | close(fd)) + break; + log_touch(log); + + /* roll back to compressed data, mark the compress in progress */ + log->last = log->first; + log->stored = 0; + if (log_mark(log, COMPRESS_OP)) + break; + BAIL(7); + + /* compress and append the data (clears mark) */ + ret = log_compress(log, data, len); + free(data); + return ret; + } while (0); + + /* broke out of do above on i/o error */ + free(data); + return -1; +} + +/* gzlog_write() return values: + 0: all good + -1: file i/o error (usually access issue) + -2: memory allocation failure + -3: invalid log pointer argument */ +int gzlog_write(gzlog *logd, void *data, size_t len) +{ + int fd, ret; + struct log *log = logd; + + /* check arguments */ + if (log == NULL || strcmp(log->id, LOGID)) + return -3; + if (data == NULL || len <= 0) + return 0; + + /* see if we lost the lock -- if so get it again and reload the extra + field information (it probably changed), recover last operation if + necessary */ + if (log_check(log) && log_open(log)) + return -1; + + /* create and write .add file */ + strcpy(log->end, ".add"); + fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644); + if (fd < 0) + return -1; + ret = (size_t)write(fd, data, len) != len; + if (ret | close(fd)) + return -1; + log_touch(log); + + /* mark log file with append in progress */ + if (log_mark(log, APPEND_OP)) + return -1; + BAIL(8); + + /* append data (clears mark) */ + if (log_append(log, data, len)) + return -1; + + /* check to see if it's time to compress -- if not, then done */ + if (((log->last - log->first) >> 10) + (log->stored >> 10) < TRIGGER) + return 0; + + /* time to compress */ + return gzlog_compress(log); +} + +/* gzlog_close() return values: + 0: ok + -3: invalid log pointer argument */ +int gzlog_close(gzlog *logd) +{ + struct log *log = logd; + + /* check arguments */ + if (log == NULL || strcmp(log->id, LOGID)) + return -3; + + /* close the log file and release the lock */ + log_close(log); + + /* free structure and return */ + if (log->path != NULL) + free(log->path); + strcpy(log->id, "bad"); + free(log); + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/examples/gzlog.h b/src/SDL2/external/zlib-1.2.8/examples/gzlog.h new file mode 100644 index 000000000..86f0cecba --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/examples/gzlog.h @@ -0,0 +1,91 @@ +/* gzlog.h + Copyright (C) 2004, 2008, 2012 Mark Adler, all rights reserved + version 2.2, 14 Aug 2012 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + +/* Version History: + 1.0 26 Nov 2004 First version + 2.0 25 Apr 2008 Complete redesign for recovery of interrupted operations + Interface changed slightly in that now path is a prefix + Compression now occurs as needed during gzlog_write() + gzlog_write() now always leaves the log file as valid gzip + 2.1 8 Jul 2012 Fix argument checks in gzlog_compress() and gzlog_write() + 2.2 14 Aug 2012 Clean up signed comparisons + */ + +/* + The gzlog object allows writing short messages to a gzipped log file, + opening the log file locked for small bursts, and then closing it. The log + object works by appending stored (uncompressed) data to the gzip file until + 1 MB has been accumulated. At that time, the stored data is compressed, and + replaces the uncompressed data in the file. The log file is truncated to + its new size at that time. After each write operation, the log file is a + valid gzip file that can decompressed to recover what was written. + + The gzlog operations can be interupted at any point due to an application or + system crash, and the log file will be recovered the next time the log is + opened with gzlog_open(). + */ + +#ifndef GZLOG_H +#define GZLOG_H + +/* gzlog object type */ +typedef void gzlog; + +/* Open a gzlog object, creating the log file if it does not exist. Return + NULL on error. Note that gzlog_open() could take a while to complete if it + has to wait to verify that a lock is stale (possibly for five minutes), or + if there is significant contention with other instantiations of this object + when locking the resource. path is the prefix of the file names created by + this object. If path is "foo", then the log file will be "foo.gz", and + other auxiliary files will be created and destroyed during the process: + "foo.dict" for a compression dictionary, "foo.temp" for a temporary (next) + dictionary, "foo.add" for data being added or compressed, "foo.lock" for the + lock file, and "foo.repairs" to log recovery operations performed due to + interrupted gzlog operations. A gzlog_open() followed by a gzlog_close() + will recover a previously interrupted operation, if any. */ +gzlog *gzlog_open(char *path); + +/* Write to a gzlog object. Return zero on success, -1 if there is a file i/o + error on any of the gzlog files (this should not happen if gzlog_open() + succeeded, unless the device has run out of space or leftover auxiliary + files have permissions or ownership that prevent their use), -2 if there is + a memory allocation failure, or -3 if the log argument is invalid (e.g. if + it was not created by gzlog_open()). This function will write data to the + file uncompressed, until 1 MB has been accumulated, at which time that data + will be compressed. The log file will be a valid gzip file upon successful + return. */ +int gzlog_write(gzlog *log, void *data, size_t len); + +/* Force compression of any uncompressed data in the log. This should be used + sparingly, if at all. The main application would be when a log file will + not be appended to again. If this is used to compress frequently while + appending, it will both significantly increase the execution time and + reduce the compression ratio. The return codes are the same as for + gzlog_write(). */ +int gzlog_compress(gzlog *log); + +/* Close a gzlog object. Return zero on success, -3 if the log argument is + invalid. The log object is freed, and so cannot be referenced again. */ +int gzlog_close(gzlog *log); + +#endif diff --git a/src/SDL2/external/zlib-1.2.8/examples/zlib_how.html b/src/SDL2/external/zlib-1.2.8/examples/zlib_how.html new file mode 100644 index 000000000..444ff1c9a --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/examples/zlib_how.html @@ -0,0 +1,545 @@ + + + + +zlib Usage Example + + + +

    zlib Usage Example

    +We often get questions about how the deflate() and inflate() functions should be used. +Users wonder when they should provide more input, when they should use more output, +what to do with a Z_BUF_ERROR, how to make sure the process terminates properly, and +so on. So for those who have read zlib.h (a few times), and +would like further edification, below is an annotated example in C of simple routines to compress and decompress +from an input file to an output file using deflate() and inflate() respectively. The +annotations are interspersed between lines of the code. So please read between the lines. +We hope this helps explain some of the intricacies of zlib. +

    +Without further adieu, here is the program zpipe.c: +

    
+/* zpipe.c: example of proper use of zlib's inflate() and deflate()
+   Not copyrighted -- provided to the public domain
+   Version 1.4  11 December 2005  Mark Adler */
+
+/* Version history:
+   1.0  30 Oct 2004  First version
+   1.1   8 Nov 2004  Add void casting for unused return values
+                     Use switch statement for inflate() return values
+   1.2   9 Nov 2004  Add assertions to document zlib guarantees
+   1.3   6 Apr 2005  Remove incorrect assertion in inf()
+   1.4  11 Dec 2005  Add hack to avoid MSDOS end-of-line conversions
+                     Avoid some compiler warnings for input and output buffers
+ */
+
    +We now include the header files for the required definitions. From +stdio.h we use fopen(), fread(), fwrite(), +feof(), ferror(), and fclose() for file i/o, and +fputs() for error messages. From string.h we use +strcmp() for command line argument processing. +From assert.h we use the assert() macro. +From zlib.h +we use the basic compression functions deflateInit(), +deflate(), and deflateEnd(), and the basic decompression +functions inflateInit(), inflate(), and +inflateEnd(). +
    
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include "zlib.h"
+
    +This is an ugly hack required to avoid corruption of the input and output data on +Windows/MS-DOS systems. Without this, those systems would assume that the input and output +files are text, and try to convert the end-of-line characters from one standard to +another. That would corrupt binary data, and in particular would render the compressed data unusable. +This sets the input and output to binary which suppresses the end-of-line conversions. +SET_BINARY_MODE() will be used later on stdin and stdout, at the beginning of main(). +
    
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+#  include <fcntl.h>
+#  include <io.h>
+#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#  define SET_BINARY_MODE(file)
+#endif
+
    +CHUNK is simply the buffer size for feeding data to and pulling data +from the zlib routines. Larger buffer sizes would be more efficient, +especially for inflate(). If the memory is available, buffers sizes +on the order of 128K or 256K bytes should be used. +
    
+#define CHUNK 16384
+
    +The def() routine compresses data from an input file to an output file. The output data +will be in the zlib format, which is different from the gzip or zip +formats. The zlib format has a very small header of only two bytes to identify it as +a zlib stream and to provide decoding information, and a four-byte trailer with a fast +check value to verify the integrity of the uncompressed data after decoding. +
    
+/* Compress from file source to file dest until EOF on source.
+   def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+   allocated for processing, Z_STREAM_ERROR if an invalid compression
+   level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
+   version of the library linked do not match, or Z_ERRNO if there is
+   an error reading or writing the files. */
+int def(FILE *source, FILE *dest, int level)
+{
+
    +Here are the local variables for def(). ret will be used for zlib +return codes. flush will keep track of the current flushing state for deflate(), +which is either no flushing, or flush to completion after the end of the input file is reached. +have is the amount of data returned from deflate(). The strm structure +is used to pass information to and from the zlib routines, and to maintain the +deflate() state. in and out are the input and output buffers for +deflate(). +
    
+    int ret, flush;
+    unsigned have;
+    z_stream strm;
+    unsigned char in[CHUNK];
+    unsigned char out[CHUNK];
+
    +The first thing we do is to initialize the zlib state for compression using +deflateInit(). This must be done before the first use of deflate(). +The zalloc, zfree, and opaque fields in the strm +structure must be initialized before calling deflateInit(). Here they are +set to the zlib constant Z_NULL to request that zlib use +the default memory allocation routines. An application may also choose to provide +custom memory allocation routines here. deflateInit() will allocate on the +order of 256K bytes for the internal state. +(See zlib Technical Details.) +

    +deflateInit() is called with a pointer to the structure to be initialized and +the compression level, which is an integer in the range of -1 to 9. Lower compression +levels result in faster execution, but less compression. Higher levels result in +greater compression, but slower execution. The zlib constant Z_DEFAULT_COMPRESSION, +equal to -1, +provides a good compromise between compression and speed and is equivalent to level 6. +Level 0 actually does no compression at all, and in fact expands the data slightly to produce +the zlib format (it is not a byte-for-byte copy of the input). +More advanced applications of zlib +may use deflateInit2() here instead. Such an application may want to reduce how +much memory will be used, at some price in compression. Or it may need to request a +gzip header and trailer instead of a zlib header and trailer, or raw +encoding with no header or trailer at all. +

    +We must check the return value of deflateInit() against the zlib constant +Z_OK to make sure that it was able to +allocate memory for the internal state, and that the provided arguments were valid. +deflateInit() will also check that the version of zlib that the zlib.h +file came from matches the version of zlib actually linked with the program. This +is especially important for environments in which zlib is a shared library. +

    +Note that an application can initialize multiple, independent zlib streams, which can +operate in parallel. The state information maintained in the structure allows the zlib +routines to be reentrant. +

    
+    /* allocate deflate state */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    ret = deflateInit(&strm, level);
+    if (ret != Z_OK)
+        return ret;
+
    +With the pleasantries out of the way, now we can get down to business. The outer do-loop +reads all of the input file and exits at the bottom of the loop once end-of-file is reached. +This loop contains the only call of deflate(). So we must make sure that all of the +input data has been processed and that all of the output data has been generated and consumed +before we fall out of the loop at the bottom. +
    
+    /* compress until end of file */
+    do {
+
    +We start off by reading data from the input file. The number of bytes read is put directly +into avail_in, and a pointer to those bytes is put into next_in. We also +check to see if end-of-file on the input has been reached. If we are at the end of file, then flush is set to the +zlib constant Z_FINISH, which is later passed to deflate() to +indicate that this is the last chunk of input data to compress. We need to use feof() +to check for end-of-file as opposed to seeing if fewer than CHUNK bytes have been read. The +reason is that if the input file length is an exact multiple of CHUNK, we will miss +the fact that we got to the end-of-file, and not know to tell deflate() to finish +up the compressed stream. If we are not yet at the end of the input, then the zlib +constant Z_NO_FLUSH will be passed to deflate to indicate that we are still +in the middle of the uncompressed data. +

    +If there is an error in reading from the input file, the process is aborted with +deflateEnd() being called to free the allocated zlib state before returning +the error. We wouldn't want a memory leak, now would we? deflateEnd() can be called +at any time after the state has been initialized. Once that's done, deflateInit() (or +deflateInit2()) would have to be called to start a new compression process. There is +no point here in checking the deflateEnd() return code. The deallocation can't fail. +

    
+        strm.avail_in = fread(in, 1, CHUNK, source);
+        if (ferror(source)) {
+            (void)deflateEnd(&strm);
+            return Z_ERRNO;
+        }
+        flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
+        strm.next_in = in;
+
    +The inner do-loop passes our chunk of input data to deflate(), and then +keeps calling deflate() until it is done producing output. Once there is no more +new output, deflate() is guaranteed to have consumed all of the input, i.e., +avail_in will be zero. +
    
+        /* run deflate() on input until output buffer not full, finish
+           compression if all of source has been read in */
+        do {
+
    +Output space is provided to deflate() by setting avail_out to the number +of available output bytes and next_out to a pointer to that space. +
    
+            strm.avail_out = CHUNK;
+            strm.next_out = out;
+
    +Now we call the compression engine itself, deflate(). It takes as many of the +avail_in bytes at next_in as it can process, and writes as many as +avail_out bytes to next_out. Those counters and pointers are then +updated past the input data consumed and the output data written. It is the amount of +output space available that may limit how much input is consumed. +Hence the inner loop to make sure that +all of the input is consumed by providing more output space each time. Since avail_in +and next_in are updated by deflate(), we don't have to mess with those +between deflate() calls until it's all used up. +

    +The parameters to deflate() are a pointer to the strm structure containing +the input and output information and the internal compression engine state, and a parameter +indicating whether and how to flush data to the output. Normally deflate will consume +several K bytes of input data before producing any output (except for the header), in order +to accumulate statistics on the data for optimum compression. It will then put out a burst of +compressed data, and proceed to consume more input before the next burst. Eventually, +deflate() +must be told to terminate the stream, complete the compression with provided input data, and +write out the trailer check value. deflate() will continue to compress normally as long +as the flush parameter is Z_NO_FLUSH. Once the Z_FINISH parameter is provided, +deflate() will begin to complete the compressed output stream. However depending on how +much output space is provided, deflate() may have to be called several times until it +has provided the complete compressed stream, even after it has consumed all of the input. The flush +parameter must continue to be Z_FINISH for those subsequent calls. +

    +There are other values of the flush parameter that are used in more advanced applications. You can +force deflate() to produce a burst of output that encodes all of the input data provided +so far, even if it wouldn't have otherwise, for example to control data latency on a link with +compressed data. You can also ask that deflate() do that as well as erase any history up to +that point so that what follows can be decompressed independently, for example for random access +applications. Both requests will degrade compression by an amount depending on how often such +requests are made. +

    +deflate() has a return value that can indicate errors, yet we do not check it here. Why +not? Well, it turns out that deflate() can do no wrong here. Let's go through +deflate()'s return values and dispense with them one by one. The possible values are +Z_OK, Z_STREAM_END, Z_STREAM_ERROR, or Z_BUF_ERROR. Z_OK +is, well, ok. Z_STREAM_END is also ok and will be returned for the last call of +deflate(). This is already guaranteed by calling deflate() with Z_FINISH +until it has no more output. Z_STREAM_ERROR is only possible if the stream is not +initialized properly, but we did initialize it properly. There is no harm in checking for +Z_STREAM_ERROR here, for example to check for the possibility that some +other part of the application inadvertently clobbered the memory containing the zlib state. +Z_BUF_ERROR will be explained further below, but +suffice it to say that this is simply an indication that deflate() could not consume +more input or produce more output. deflate() can be called again with more output space +or more available input, which it will be in this code. +

    
+            ret = deflate(&strm, flush);    /* no bad return value */
+            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
+
    +Now we compute how much output deflate() provided on the last call, which is the +difference between how much space was provided before the call, and how much output space +is still available after the call. Then that data, if any, is written to the output file. +We can then reuse the output buffer for the next call of deflate(). Again if there +is a file i/o error, we call deflateEnd() before returning to avoid a memory leak. +
    
+            have = CHUNK - strm.avail_out;
+            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+                (void)deflateEnd(&strm);
+                return Z_ERRNO;
+            }
+
    +The inner do-loop is repeated until the last deflate() call fails to fill the +provided output buffer. Then we know that deflate() has done as much as it can with +the provided input, and that all of that input has been consumed. We can then fall out of this +loop and reuse the input buffer. +

    +The way we tell that deflate() has no more output is by seeing that it did not fill +the output buffer, leaving avail_out greater than zero. However suppose that +deflate() has no more output, but just so happened to exactly fill the output buffer! +avail_out is zero, and we can't tell that deflate() has done all it can. +As far as we know, deflate() +has more output for us. So we call it again. But now deflate() produces no output +at all, and avail_out remains unchanged as CHUNK. That deflate() call +wasn't able to do anything, either consume input or produce output, and so it returns +Z_BUF_ERROR. (See, I told you I'd cover this later.) However this is not a problem at +all. Now we finally have the desired indication that deflate() is really done, +and so we drop out of the inner loop to provide more input to deflate(). +

    +With flush set to Z_FINISH, this final set of deflate() calls will +complete the output stream. Once that is done, subsequent calls of deflate() would return +Z_STREAM_ERROR if the flush parameter is not Z_FINISH, and do no more processing +until the state is reinitialized. +

    +Some applications of zlib have two loops that call deflate() +instead of the single inner loop we have here. The first loop would call +without flushing and feed all of the data to deflate(). The second loop would call +deflate() with no more +data and the Z_FINISH parameter to complete the process. As you can see from this +example, that can be avoided by simply keeping track of the current flush state. +

    
+        } while (strm.avail_out == 0);
+        assert(strm.avail_in == 0);     /* all input will be used */
+
    +Now we check to see if we have already processed all of the input file. That information was +saved in the flush variable, so we see if that was set to Z_FINISH. If so, +then we're done and we fall out of the outer loop. We're guaranteed to get Z_STREAM_END +from the last deflate() call, since we ran it until the last chunk of input was +consumed and all of the output was generated. +
    
+        /* done when last data in file processed */
+    } while (flush != Z_FINISH);
+    assert(ret == Z_STREAM_END);        /* stream will be complete */
+
    +The process is complete, but we still need to deallocate the state to avoid a memory leak +(or rather more like a memory hemorrhage if you didn't do this). Then +finally we can return with a happy return value. +
    
+    /* clean up and return */
+    (void)deflateEnd(&strm);
+    return Z_OK;
+}
+
    +Now we do the same thing for decompression in the inf() routine. inf() +decompresses what is hopefully a valid zlib stream from the input file and writes the +uncompressed data to the output file. Much of the discussion above for def() +applies to inf() as well, so the discussion here will focus on the differences between +the two. +
    
+/* Decompress from file source to file dest until stream ends or EOF.
+   inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+   allocated for processing, Z_DATA_ERROR if the deflate data is
+   invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
+   the version of the library linked do not match, or Z_ERRNO if there
+   is an error reading or writing the files. */
+int inf(FILE *source, FILE *dest)
+{
+
    +The local variables have the same functionality as they do for def(). The +only difference is that there is no flush variable, since inflate() +can tell from the zlib stream itself when the stream is complete. +
    
+    int ret;
+    unsigned have;
+    z_stream strm;
+    unsigned char in[CHUNK];
+    unsigned char out[CHUNK];
+
    +The initialization of the state is the same, except that there is no compression level, +of course, and two more elements of the structure are initialized. avail_in +and next_in must be initialized before calling inflateInit(). This +is because the application has the option to provide the start of the zlib stream in +order for inflateInit() to have access to information about the compression +method to aid in memory allocation. In the current implementation of zlib +(up through versions 1.2.x), the method-dependent memory allocations are deferred to the first call of +inflate() anyway. However those fields must be initialized since later versions +of zlib that provide more compression methods may take advantage of this interface. +In any case, no decompression is performed by inflateInit(), so the +avail_out and next_out fields do not need to be initialized before calling. +

    +Here avail_in is set to zero and next_in is set to Z_NULL to +indicate that no input data is being provided. +

    
+    /* allocate inflate state */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit(&strm);
+    if (ret != Z_OK)
+        return ret;
+
    +The outer do-loop decompresses input until inflate() indicates +that it has reached the end of the compressed data and has produced all of the uncompressed +output. This is in contrast to def() which processes all of the input file. +If end-of-file is reached before the compressed data self-terminates, then the compressed +data is incomplete and an error is returned. +
    
+    /* decompress until deflate stream ends or end of file */
+    do {
+
    +We read input data and set the strm structure accordingly. If we've reached the +end of the input file, then we leave the outer loop and report an error, since the +compressed data is incomplete. Note that we may read more data than is eventually consumed +by inflate(), if the input file continues past the zlib stream. +For applications where zlib streams are embedded in other data, this routine would +need to be modified to return the unused data, or at least indicate how much of the input +data was not used, so the application would know where to pick up after the zlib stream. +
    
+        strm.avail_in = fread(in, 1, CHUNK, source);
+        if (ferror(source)) {
+            (void)inflateEnd(&strm);
+            return Z_ERRNO;
+        }
+        if (strm.avail_in == 0)
+            break;
+        strm.next_in = in;
+
    +The inner do-loop has the same function it did in def(), which is to +keep calling inflate() until has generated all of the output it can with the +provided input. +
    
+        /* run inflate() on input until output buffer not full */
+        do {
+
    +Just like in def(), the same output space is provided for each call of inflate(). +
    
+            strm.avail_out = CHUNK;
+            strm.next_out = out;
+
    +Now we run the decompression engine itself. There is no need to adjust the flush parameter, since +the zlib format is self-terminating. The main difference here is that there are +return values that we need to pay attention to. Z_DATA_ERROR +indicates that inflate() detected an error in the zlib compressed data format, +which means that either the data is not a zlib stream to begin with, or that the data was +corrupted somewhere along the way since it was compressed. The other error to be processed is +Z_MEM_ERROR, which can occur since memory allocation is deferred until inflate() +needs it, unlike deflate(), whose memory is allocated at the start by deflateInit(). +

    +Advanced applications may use +deflateSetDictionary() to prime deflate() with a set of likely data to improve the +first 32K or so of compression. This is noted in the zlib header, so inflate() +requests that that dictionary be provided before it can start to decompress. Without the dictionary, +correct decompression is not possible. For this routine, we have no idea what the dictionary is, +so the Z_NEED_DICT indication is converted to a Z_DATA_ERROR. +

    +inflate() can also return Z_STREAM_ERROR, which should not be possible here, +but could be checked for as noted above for def(). Z_BUF_ERROR does not need to be +checked for here, for the same reasons noted for def(). Z_STREAM_END will be +checked for later. +

    
+            ret = inflate(&strm, Z_NO_FLUSH);
+            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
+            switch (ret) {
+            case Z_NEED_DICT:
+                ret = Z_DATA_ERROR;     /* and fall through */
+            case Z_DATA_ERROR:
+            case Z_MEM_ERROR:
+                (void)inflateEnd(&strm);
+                return ret;
+            }
+
    +The output of inflate() is handled identically to that of deflate(). +
    
+            have = CHUNK - strm.avail_out;
+            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+                (void)inflateEnd(&strm);
+                return Z_ERRNO;
+            }
+
    +The inner do-loop ends when inflate() has no more output as indicated +by not filling the output buffer, just as for deflate(). In this case, we cannot +assert that strm.avail_in will be zero, since the deflate stream may end before the file +does. +
    
+        } while (strm.avail_out == 0);
+
    +The outer do-loop ends when inflate() reports that it has reached the +end of the input zlib stream, has completed the decompression and integrity +check, and has provided all of the output. This is indicated by the inflate() +return value Z_STREAM_END. The inner loop is guaranteed to leave ret +equal to Z_STREAM_END if the last chunk of the input file read contained the end +of the zlib stream. So if the return value is not Z_STREAM_END, the +loop continues to read more input. +
    
+        /* done when inflate() says it's done */
+    } while (ret != Z_STREAM_END);
+
    +At this point, decompression successfully completed, or we broke out of the loop due to no +more data being available from the input file. If the last inflate() return value +is not Z_STREAM_END, then the zlib stream was incomplete and a data error +is returned. Otherwise, we return with a happy return value. Of course, inflateEnd() +is called first to avoid a memory leak. +
    
+    /* clean up and return */
+    (void)inflateEnd(&strm);
+    return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
+}
+
    +That ends the routines that directly use zlib. The following routines make this +a command-line program by running data through the above routines from stdin to +stdout, and handling any errors reported by def() or inf(). +

    +zerr() is used to interpret the possible error codes from def() +and inf(), as detailed in their comments above, and print out an error message. +Note that these are only a subset of the possible return values from deflate() +and inflate(). +

    
+/* report a zlib or i/o error */
+void zerr(int ret)
+{
+    fputs("zpipe: ", stderr);
+    switch (ret) {
+    case Z_ERRNO:
+        if (ferror(stdin))
+            fputs("error reading stdin\n", stderr);
+        if (ferror(stdout))
+            fputs("error writing stdout\n", stderr);
+        break;
+    case Z_STREAM_ERROR:
+        fputs("invalid compression level\n", stderr);
+        break;
+    case Z_DATA_ERROR:
+        fputs("invalid or incomplete deflate data\n", stderr);
+        break;
+    case Z_MEM_ERROR:
+        fputs("out of memory\n", stderr);
+        break;
+    case Z_VERSION_ERROR:
+        fputs("zlib version mismatch!\n", stderr);
+    }
+}
+
    +Here is the main() routine used to test def() and inf(). The +zpipe command is simply a compression pipe from stdin to stdout, if +no arguments are given, or it is a decompression pipe if zpipe -d is used. If any other +arguments are provided, no compression or decompression is performed. Instead a usage +message is displayed. Examples are zpipe < foo.txt > foo.txt.z to compress, and +zpipe -d < foo.txt.z > foo.txt to decompress. +
    
+/* compress or decompress from stdin to stdout */
+int main(int argc, char **argv)
+{
+    int ret;
+
+    /* avoid end-of-line conversions */
+    SET_BINARY_MODE(stdin);
+    SET_BINARY_MODE(stdout);
+
+    /* do compression if no arguments */
+    if (argc == 1) {
+        ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
+        if (ret != Z_OK)
+            zerr(ret);
+        return ret;
+    }
+
+    /* do decompression if -d specified */
+    else if (argc == 2 && strcmp(argv[1], "-d") == 0) {
+        ret = inf(stdin, stdout);
+        if (ret != Z_OK)
+            zerr(ret);
+        return ret;
+    }
+
+    /* otherwise, report usage */
+    else {
+        fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr);
+        return 1;
+    }
+}
+
    +
    +Copyright (c) 2004, 2005 by Mark Adler
    Last modified 11 December 2005     + + diff --git a/src/SDL2/external/zlib-1.2.8/examples/zpipe.c b/src/SDL2/external/zlib-1.2.8/examples/zpipe.c new file mode 100644 index 000000000..83535d169 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/examples/zpipe.c @@ -0,0 +1,205 @@ +/* zpipe.c: example of proper use of zlib's inflate() and deflate() + Not copyrighted -- provided to the public domain + Version 1.4 11 December 2005 Mark Adler */ + +/* Version history: + 1.0 30 Oct 2004 First version + 1.1 8 Nov 2004 Add void casting for unused return values + Use switch statement for inflate() return values + 1.2 9 Nov 2004 Add assertions to document zlib guarantees + 1.3 6 Apr 2005 Remove incorrect assertion in inf() + 1.4 11 Dec 2005 Add hack to avoid MSDOS end-of-line conversions + Avoid some compiler warnings for input and output buffers + */ + +#include +#include +#include +#include "zlib.h" + +#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) +# include +# include +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +#define CHUNK 16384 + +/* Compress from file source to file dest until EOF on source. + def() returns Z_OK on success, Z_MEM_ERROR if memory could not be + allocated for processing, Z_STREAM_ERROR if an invalid compression + level is supplied, Z_VERSION_ERROR if the version of zlib.h and the + version of the library linked do not match, or Z_ERRNO if there is + an error reading or writing the files. */ +int def(FILE *source, FILE *dest, int level) +{ + int ret, flush; + unsigned have; + z_stream strm; + unsigned char in[CHUNK]; + unsigned char out[CHUNK]; + + /* allocate deflate state */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + ret = deflateInit(&strm, level); + if (ret != Z_OK) + return ret; + + /* compress until end of file */ + do { + strm.avail_in = fread(in, 1, CHUNK, source); + if (ferror(source)) { + (void)deflateEnd(&strm); + return Z_ERRNO; + } + flush = feof(source) ? Z_FINISH : Z_NO_FLUSH; + strm.next_in = in; + + /* run deflate() on input until output buffer not full, finish + compression if all of source has been read in */ + do { + strm.avail_out = CHUNK; + strm.next_out = out; + ret = deflate(&strm, flush); /* no bad return value */ + assert(ret != Z_STREAM_ERROR); /* state not clobbered */ + have = CHUNK - strm.avail_out; + if (fwrite(out, 1, have, dest) != have || ferror(dest)) { + (void)deflateEnd(&strm); + return Z_ERRNO; + } + } while (strm.avail_out == 0); + assert(strm.avail_in == 0); /* all input will be used */ + + /* done when last data in file processed */ + } while (flush != Z_FINISH); + assert(ret == Z_STREAM_END); /* stream will be complete */ + + /* clean up and return */ + (void)deflateEnd(&strm); + return Z_OK; +} + +/* Decompress from file source to file dest until stream ends or EOF. + inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be + allocated for processing, Z_DATA_ERROR if the deflate data is + invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and + the version of the library linked do not match, or Z_ERRNO if there + is an error reading or writing the files. */ +int inf(FILE *source, FILE *dest) +{ + int ret; + unsigned have; + z_stream strm; + unsigned char in[CHUNK]; + unsigned char out[CHUNK]; + + /* allocate inflate state */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit(&strm); + if (ret != Z_OK) + return ret; + + /* decompress until deflate stream ends or end of file */ + do { + strm.avail_in = fread(in, 1, CHUNK, source); + if (ferror(source)) { + (void)inflateEnd(&strm); + return Z_ERRNO; + } + if (strm.avail_in == 0) + break; + strm.next_in = in; + + /* run inflate() on input until output buffer not full */ + do { + strm.avail_out = CHUNK; + strm.next_out = out; + ret = inflate(&strm, Z_NO_FLUSH); + assert(ret != Z_STREAM_ERROR); /* state not clobbered */ + switch (ret) { + case Z_NEED_DICT: + ret = Z_DATA_ERROR; /* and fall through */ + case Z_DATA_ERROR: + case Z_MEM_ERROR: + (void)inflateEnd(&strm); + return ret; + } + have = CHUNK - strm.avail_out; + if (fwrite(out, 1, have, dest) != have || ferror(dest)) { + (void)inflateEnd(&strm); + return Z_ERRNO; + } + } while (strm.avail_out == 0); + + /* done when inflate() says it's done */ + } while (ret != Z_STREAM_END); + + /* clean up and return */ + (void)inflateEnd(&strm); + return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR; +} + +/* report a zlib or i/o error */ +void zerr(int ret) +{ + fputs("zpipe: ", stderr); + switch (ret) { + case Z_ERRNO: + if (ferror(stdin)) + fputs("error reading stdin\n", stderr); + if (ferror(stdout)) + fputs("error writing stdout\n", stderr); + break; + case Z_STREAM_ERROR: + fputs("invalid compression level\n", stderr); + break; + case Z_DATA_ERROR: + fputs("invalid or incomplete deflate data\n", stderr); + break; + case Z_MEM_ERROR: + fputs("out of memory\n", stderr); + break; + case Z_VERSION_ERROR: + fputs("zlib version mismatch!\n", stderr); + } +} + +/* compress or decompress from stdin to stdout */ +int main(int argc, char **argv) +{ + int ret; + + /* avoid end-of-line conversions */ + SET_BINARY_MODE(stdin); + SET_BINARY_MODE(stdout); + + /* do compression if no arguments */ + if (argc == 1) { + ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION); + if (ret != Z_OK) + zerr(ret); + return ret; + } + + /* do decompression if -d specified */ + else if (argc == 2 && strcmp(argv[1], "-d") == 0) { + ret = inf(stdin, stdout); + if (ret != Z_OK) + zerr(ret); + return ret; + } + + /* otherwise, report usage */ + else { + fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr); + return 1; + } +} diff --git a/src/SDL2/external/zlib-1.2.8/examples/zran.c b/src/SDL2/external/zlib-1.2.8/examples/zran.c new file mode 100644 index 000000000..278f9ad07 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/examples/zran.c @@ -0,0 +1,409 @@ +/* zran.c -- example of zlib/gzip stream indexing and random access + * Copyright (C) 2005, 2012 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + Version 1.1 29 Sep 2012 Mark Adler */ + +/* Version History: + 1.0 29 May 2005 First version + 1.1 29 Sep 2012 Fix memory reallocation error + */ + +/* Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary() + for random access of a compressed file. A file containing a zlib or gzip + stream is provided on the command line. The compressed stream is decoded in + its entirety, and an index built with access points about every SPAN bytes + in the uncompressed output. The compressed file is left open, and can then + be read randomly, having to decompress on the average SPAN/2 uncompressed + bytes before getting to the desired block of data. + + An access point can be created at the start of any deflate block, by saving + the starting file offset and bit of that block, and the 32K bytes of + uncompressed data that precede that block. Also the uncompressed offset of + that block is saved to provide a referece for locating a desired starting + point in the uncompressed stream. build_index() works by decompressing the + input zlib or gzip stream a block at a time, and at the end of each block + deciding if enough uncompressed data has gone by to justify the creation of + a new access point. If so, that point is saved in a data structure that + grows as needed to accommodate the points. + + To use the index, an offset in the uncompressed data is provided, for which + the latest accees point at or preceding that offset is located in the index. + The input file is positioned to the specified location in the index, and if + necessary the first few bits of the compressed data is read from the file. + inflate is initialized with those bits and the 32K of uncompressed data, and + the decompression then proceeds until the desired offset in the file is + reached. Then the decompression continues to read the desired uncompressed + data from the file. + + Another approach would be to generate the index on demand. In that case, + requests for random access reads from the compressed data would try to use + the index, but if a read far enough past the end of the index is required, + then further index entries would be generated and added. + + There is some fair bit of overhead to starting inflation for the random + access, mainly copying the 32K byte dictionary. So if small pieces of the + file are being accessed, it would make sense to implement a cache to hold + some lookahead and avoid many calls to extract() for small lengths. + + Another way to build an index would be to use inflateCopy(). That would + not be constrained to have access points at block boundaries, but requires + more memory per access point, and also cannot be saved to file due to the + use of pointers in the state. The approach here allows for storage of the + index in a file. + */ + +#include +#include +#include +#include "zlib.h" + +#define local static + +#define SPAN 1048576L /* desired distance between access points */ +#define WINSIZE 32768U /* sliding window size */ +#define CHUNK 16384 /* file input buffer size */ + +/* access point entry */ +struct point { + off_t out; /* corresponding offset in uncompressed data */ + off_t in; /* offset in input file of first full byte */ + int bits; /* number of bits (1-7) from byte at in - 1, or 0 */ + unsigned char window[WINSIZE]; /* preceding 32K of uncompressed data */ +}; + +/* access point list */ +struct access { + int have; /* number of list entries filled in */ + int size; /* number of list entries allocated */ + struct point *list; /* allocated list */ +}; + +/* Deallocate an index built by build_index() */ +local void free_index(struct access *index) +{ + if (index != NULL) { + free(index->list); + free(index); + } +} + +/* Add an entry to the access point list. If out of memory, deallocate the + existing list and return NULL. */ +local struct access *addpoint(struct access *index, int bits, + off_t in, off_t out, unsigned left, unsigned char *window) +{ + struct point *next; + + /* if list is empty, create it (start with eight points) */ + if (index == NULL) { + index = malloc(sizeof(struct access)); + if (index == NULL) return NULL; + index->list = malloc(sizeof(struct point) << 3); + if (index->list == NULL) { + free(index); + return NULL; + } + index->size = 8; + index->have = 0; + } + + /* if list is full, make it bigger */ + else if (index->have == index->size) { + index->size <<= 1; + next = realloc(index->list, sizeof(struct point) * index->size); + if (next == NULL) { + free_index(index); + return NULL; + } + index->list = next; + } + + /* fill in entry and increment how many we have */ + next = index->list + index->have; + next->bits = bits; + next->in = in; + next->out = out; + if (left) + memcpy(next->window, window + WINSIZE - left, left); + if (left < WINSIZE) + memcpy(next->window + left, window, WINSIZE - left); + index->have++; + + /* return list, possibly reallocated */ + return index; +} + +/* Make one entire pass through the compressed stream and build an index, with + access points about every span bytes of uncompressed output -- span is + chosen to balance the speed of random access against the memory requirements + of the list, about 32K bytes per access point. Note that data after the end + of the first zlib or gzip stream in the file is ignored. build_index() + returns the number of access points on success (>= 1), Z_MEM_ERROR for out + of memory, Z_DATA_ERROR for an error in the input file, or Z_ERRNO for a + file read error. On success, *built points to the resulting index. */ +local int build_index(FILE *in, off_t span, struct access **built) +{ + int ret; + off_t totin, totout; /* our own total counters to avoid 4GB limit */ + off_t last; /* totout value of last access point */ + struct access *index; /* access points being generated */ + z_stream strm; + unsigned char input[CHUNK]; + unsigned char window[WINSIZE]; + + /* initialize inflate */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, 47); /* automatic zlib or gzip decoding */ + if (ret != Z_OK) + return ret; + + /* inflate the input, maintain a sliding window, and build an index -- this + also validates the integrity of the compressed data using the check + information at the end of the gzip or zlib stream */ + totin = totout = last = 0; + index = NULL; /* will be allocated by first addpoint() */ + strm.avail_out = 0; + do { + /* get some compressed data from input file */ + strm.avail_in = fread(input, 1, CHUNK, in); + if (ferror(in)) { + ret = Z_ERRNO; + goto build_index_error; + } + if (strm.avail_in == 0) { + ret = Z_DATA_ERROR; + goto build_index_error; + } + strm.next_in = input; + + /* process all of that, or until end of stream */ + do { + /* reset sliding window if necessary */ + if (strm.avail_out == 0) { + strm.avail_out = WINSIZE; + strm.next_out = window; + } + + /* inflate until out of input, output, or at end of block -- + update the total input and output counters */ + totin += strm.avail_in; + totout += strm.avail_out; + ret = inflate(&strm, Z_BLOCK); /* return at end of block */ + totin -= strm.avail_in; + totout -= strm.avail_out; + if (ret == Z_NEED_DICT) + ret = Z_DATA_ERROR; + if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR) + goto build_index_error; + if (ret == Z_STREAM_END) + break; + + /* if at end of block, consider adding an index entry (note that if + data_type indicates an end-of-block, then all of the + uncompressed data from that block has been delivered, and none + of the compressed data after that block has been consumed, + except for up to seven bits) -- the totout == 0 provides an + entry point after the zlib or gzip header, and assures that the + index always has at least one access point; we avoid creating an + access point after the last block by checking bit 6 of data_type + */ + if ((strm.data_type & 128) && !(strm.data_type & 64) && + (totout == 0 || totout - last > span)) { + index = addpoint(index, strm.data_type & 7, totin, + totout, strm.avail_out, window); + if (index == NULL) { + ret = Z_MEM_ERROR; + goto build_index_error; + } + last = totout; + } + } while (strm.avail_in != 0); + } while (ret != Z_STREAM_END); + + /* clean up and return index (release unused entries in list) */ + (void)inflateEnd(&strm); + index->list = realloc(index->list, sizeof(struct point) * index->have); + index->size = index->have; + *built = index; + return index->size; + + /* return error */ + build_index_error: + (void)inflateEnd(&strm); + if (index != NULL) + free_index(index); + return ret; +} + +/* Use the index to read len bytes from offset into buf, return bytes read or + negative for error (Z_DATA_ERROR or Z_MEM_ERROR). If data is requested past + the end of the uncompressed data, then extract() will return a value less + than len, indicating how much as actually read into buf. This function + should not return a data error unless the file was modified since the index + was generated. extract() may also return Z_ERRNO if there is an error on + reading or seeking the input file. */ +local int extract(FILE *in, struct access *index, off_t offset, + unsigned char *buf, int len) +{ + int ret, skip; + z_stream strm; + struct point *here; + unsigned char input[CHUNK]; + unsigned char discard[WINSIZE]; + + /* proceed only if something reasonable to do */ + if (len < 0) + return 0; + + /* find where in stream to start */ + here = index->list; + ret = index->have; + while (--ret && here[1].out <= offset) + here++; + + /* initialize file and inflate state to start there */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, -15); /* raw inflate */ + if (ret != Z_OK) + return ret; + ret = fseeko(in, here->in - (here->bits ? 1 : 0), SEEK_SET); + if (ret == -1) + goto extract_ret; + if (here->bits) { + ret = getc(in); + if (ret == -1) { + ret = ferror(in) ? Z_ERRNO : Z_DATA_ERROR; + goto extract_ret; + } + (void)inflatePrime(&strm, here->bits, ret >> (8 - here->bits)); + } + (void)inflateSetDictionary(&strm, here->window, WINSIZE); + + /* skip uncompressed bytes until offset reached, then satisfy request */ + offset -= here->out; + strm.avail_in = 0; + skip = 1; /* while skipping to offset */ + do { + /* define where to put uncompressed data, and how much */ + if (offset == 0 && skip) { /* at offset now */ + strm.avail_out = len; + strm.next_out = buf; + skip = 0; /* only do this once */ + } + if (offset > WINSIZE) { /* skip WINSIZE bytes */ + strm.avail_out = WINSIZE; + strm.next_out = discard; + offset -= WINSIZE; + } + else if (offset != 0) { /* last skip */ + strm.avail_out = (unsigned)offset; + strm.next_out = discard; + offset = 0; + } + + /* uncompress until avail_out filled, or end of stream */ + do { + if (strm.avail_in == 0) { + strm.avail_in = fread(input, 1, CHUNK, in); + if (ferror(in)) { + ret = Z_ERRNO; + goto extract_ret; + } + if (strm.avail_in == 0) { + ret = Z_DATA_ERROR; + goto extract_ret; + } + strm.next_in = input; + } + ret = inflate(&strm, Z_NO_FLUSH); /* normal inflate */ + if (ret == Z_NEED_DICT) + ret = Z_DATA_ERROR; + if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR) + goto extract_ret; + if (ret == Z_STREAM_END) + break; + } while (strm.avail_out != 0); + + /* if reach end of stream, then don't keep trying to get more */ + if (ret == Z_STREAM_END) + break; + + /* do until offset reached and requested data read, or stream ends */ + } while (skip); + + /* compute number of uncompressed bytes read after offset */ + ret = skip ? 0 : len - strm.avail_out; + + /* clean up and return bytes read or error */ + extract_ret: + (void)inflateEnd(&strm); + return ret; +} + +/* Demonstrate the use of build_index() and extract() by processing the file + provided on the command line, and the extracting 16K from about 2/3rds of + the way through the uncompressed output, and writing that to stdout. */ +int main(int argc, char **argv) +{ + int len; + off_t offset; + FILE *in; + struct access *index = NULL; + unsigned char buf[CHUNK]; + + /* open input file */ + if (argc != 2) { + fprintf(stderr, "usage: zran file.gz\n"); + return 1; + } + in = fopen(argv[1], "rb"); + if (in == NULL) { + fprintf(stderr, "zran: could not open %s for reading\n", argv[1]); + return 1; + } + + /* build index */ + len = build_index(in, SPAN, &index); + if (len < 0) { + fclose(in); + switch (len) { + case Z_MEM_ERROR: + fprintf(stderr, "zran: out of memory\n"); + break; + case Z_DATA_ERROR: + fprintf(stderr, "zran: compressed data error in %s\n", argv[1]); + break; + case Z_ERRNO: + fprintf(stderr, "zran: read error on %s\n", argv[1]); + break; + default: + fprintf(stderr, "zran: error %d while building index\n", len); + } + return 1; + } + fprintf(stderr, "zran: built index with %d access points\n", len); + + /* use index by reading some bytes from an arbitrary offset */ + offset = (index->list[index->have - 1].out << 1) / 3; + len = extract(in, index, offset, buf, CHUNK); + if (len < 0) + fprintf(stderr, "zran: extraction failed: %s error\n", + len == Z_MEM_ERROR ? "out of memory" : "input corrupted"); + else { + fwrite(buf, 1, len, stdout); + fprintf(stderr, "zran: extracted %d bytes at %llu\n", len, offset); + } + + /* clean up and exit */ + free_index(index); + fclose(in); + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/gzclose.c b/src/SDL2/external/zlib-1.2.8/gzclose.c new file mode 100644 index 000000000..caeb99a31 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/gzclose.c @@ -0,0 +1,25 @@ +/* gzclose.c -- zlib gzclose() function + * Copyright (C) 2004, 2010 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "gzguts.h" + +/* gzclose() is in a separate file so that it is linked in only if it is used. + That way the other gzclose functions can be used instead to avoid linking in + unneeded compression or decompression routines. */ +int ZEXPORT gzclose(file) + gzFile file; +{ +#ifndef NO_GZCOMPRESS + gz_statep state; + + if (file == NULL) + return Z_STREAM_ERROR; + state = (gz_statep)file; + + return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file); +#else + return gzclose_r(file); +#endif +} diff --git a/src/SDL2/external/zlib-1.2.8/gzguts.h b/src/SDL2/external/zlib-1.2.8/gzguts.h new file mode 100644 index 000000000..d87659d03 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/gzguts.h @@ -0,0 +1,209 @@ +/* gzguts.h -- zlib internal header definitions for gz* operations + * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#ifdef _LARGEFILE64_SOURCE +# ifndef _LARGEFILE_SOURCE +# define _LARGEFILE_SOURCE 1 +# endif +# ifdef _FILE_OFFSET_BITS +# undef _FILE_OFFSET_BITS +# endif +#endif + +#ifdef HAVE_HIDDEN +# define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) +#else +# define ZLIB_INTERNAL +#endif + +#include +#include "zlib.h" +#ifdef STDC +# include +# include +# include +#endif +#include + +#ifdef _WIN32 +# include +#endif + +#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32) +# include +#endif + +#ifdef WINAPI_FAMILY +# define open _open +# define read _read +# define write _write +# define close _close +#endif + +#ifdef NO_DEFLATE /* for compatibility with old definition */ +# define NO_GZCOMPRESS +#endif + +#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#if defined(__CYGWIN__) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#ifndef HAVE_VSNPRINTF +# ifdef MSDOS +/* vsnprintf may exist on some MS-DOS compilers (DJGPP?), + but for now we just assume it doesn't. */ +# define NO_vsnprintf +# endif +# ifdef __TURBOC__ +# define NO_vsnprintf +# endif +# ifdef WIN32 +/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */ +# if !defined(vsnprintf) && !defined(NO_vsnprintf) +# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 ) +# define vsnprintf _vsnprintf +# endif +# endif +# endif +# ifdef __SASC +# define NO_vsnprintf +# endif +# ifdef VMS +# define NO_vsnprintf +# endif +# ifdef __OS400__ +# define NO_vsnprintf +# endif +# ifdef __MVS__ +# define NO_vsnprintf +# endif +#endif + +/* unlike snprintf (which is required in C99, yet still not supported by + Microsoft more than a decade later!), _snprintf does not guarantee null + termination of the result -- however this is only used in gzlib.c where + the result is assured to fit in the space provided */ +#ifdef _MSC_VER +# define snprintf _snprintf +#endif + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +/* gz* functions always use library allocation functions */ +#ifndef STDC + extern voidp malloc OF((uInt size)); + extern void free OF((voidpf ptr)); +#endif + +/* get errno and strerror definition */ +#if defined UNDER_CE +# include +# define zstrerror() gz_strwinerror((DWORD)GetLastError()) +#else +# ifndef NO_STRERROR +# include +# define zstrerror() strerror(errno) +# else +# define zstrerror() "stdio error (consult errno)" +# endif +#endif + +/* provide prototypes for these when building zlib without LFS */ +#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); + ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); +#endif + +/* default memLevel */ +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif + +/* default i/o buffer size -- double this for output when reading (this and + twice this must be able to fit in an unsigned type) */ +#define GZBUFSIZE 8192 + +/* gzip modes, also provide a little integrity check on the passed structure */ +#define GZ_NONE 0 +#define GZ_READ 7247 +#define GZ_WRITE 31153 +#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */ + +/* values for gz_state how */ +#define LOOK 0 /* look for a gzip header */ +#define COPY 1 /* copy input directly */ +#define GZIP 2 /* decompress a gzip stream */ + +/* internal gzip file state data structure */ +typedef struct { + /* exposed contents for gzgetc() macro */ + struct gzFile_s x; /* "x" for exposed */ + /* x.have: number of bytes available at x.next */ + /* x.next: next output data to deliver or write */ + /* x.pos: current position in uncompressed data */ + /* used for both reading and writing */ + int mode; /* see gzip modes above */ + int fd; /* file descriptor */ + char *path; /* path or fd for error messages */ + unsigned size; /* buffer size, zero if not allocated yet */ + unsigned want; /* requested buffer size, default is GZBUFSIZE */ + unsigned char *in; /* input buffer */ + unsigned char *out; /* output buffer (double-sized when reading) */ + int direct; /* 0 if processing gzip, 1 if transparent */ + /* just for reading */ + int how; /* 0: get header, 1: copy, 2: decompress */ + z_off64_t start; /* where the gzip data started, for rewinding */ + int eof; /* true if end of input file reached */ + int past; /* true if read requested past end */ + /* just for writing */ + int level; /* compression level */ + int strategy; /* compression strategy */ + /* seek request */ + z_off64_t skip; /* amount to skip (already rewound if backwards) */ + int seek; /* true if seek request pending */ + /* error information */ + int err; /* error code */ + char *msg; /* error message */ + /* zlib inflate or deflate stream */ + z_stream strm; /* stream structure in-place (not a pointer) */ +} gz_state; +typedef gz_state FAR *gz_statep; + +/* shared functions */ +void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *)); +#if defined UNDER_CE +char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error)); +#endif + +/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t + value -- needed when comparing unsigned to z_off64_t, which is signed + (possible z_off64_t types off_t, off64_t, and long are all signed) */ +#ifdef INT_MAX +# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX) +#else +unsigned ZLIB_INTERNAL gz_intmax OF((void)); +# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax()) +#endif diff --git a/src/SDL2/external/zlib-1.2.8/gzlib.c b/src/SDL2/external/zlib-1.2.8/gzlib.c new file mode 100644 index 000000000..fae202ef8 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/gzlib.c @@ -0,0 +1,634 @@ +/* gzlib.c -- zlib functions common to reading and writing gzip files + * Copyright (C) 2004, 2010, 2011, 2012, 2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "gzguts.h" + +#if defined(_WIN32) && !defined(__BORLANDC__) +# define LSEEK _lseeki64 +#else +#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 +# define LSEEK lseek64 +#else +# define LSEEK lseek +#endif +#endif + +/* Local functions */ +local void gz_reset OF((gz_statep)); +local gzFile gz_open OF((const void *, int, const char *)); + +#if defined UNDER_CE + +/* Map the Windows error number in ERROR to a locale-dependent error message + string and return a pointer to it. Typically, the values for ERROR come + from GetLastError. + + The string pointed to shall not be modified by the application, but may be + overwritten by a subsequent call to gz_strwinerror + + The gz_strwinerror function does not change the current setting of + GetLastError. */ +char ZLIB_INTERNAL *gz_strwinerror (error) + DWORD error; +{ + static char buf[1024]; + + wchar_t *msgbuf; + DWORD lasterr = GetLastError(); + DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM + | FORMAT_MESSAGE_ALLOCATE_BUFFER, + NULL, + error, + 0, /* Default language */ + (LPVOID)&msgbuf, + 0, + NULL); + if (chars != 0) { + /* If there is an \r\n appended, zap it. */ + if (chars >= 2 + && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') { + chars -= 2; + msgbuf[chars] = 0; + } + + if (chars > sizeof (buf) - 1) { + chars = sizeof (buf) - 1; + msgbuf[chars] = 0; + } + + wcstombs(buf, msgbuf, chars + 1); + LocalFree(msgbuf); + } + else { + sprintf(buf, "unknown win32 error (%ld)", error); + } + + SetLastError(lasterr); + return buf; +} + +#endif /* UNDER_CE */ + +/* Reset gzip file state */ +local void gz_reset(state) + gz_statep state; +{ + state->x.have = 0; /* no output data available */ + if (state->mode == GZ_READ) { /* for reading ... */ + state->eof = 0; /* not at end of file */ + state->past = 0; /* have not read past end yet */ + state->how = LOOK; /* look for gzip header */ + } + state->seek = 0; /* no seek request pending */ + gz_error(state, Z_OK, NULL); /* clear error */ + state->x.pos = 0; /* no uncompressed data yet */ + state->strm.avail_in = 0; /* no input data yet */ +} + +/* Open a gzip file either by name or file descriptor. */ +local gzFile gz_open(path, fd, mode) + const void *path; + int fd; + const char *mode; +{ + gz_statep state; + size_t len; + int oflag; +#ifdef O_CLOEXEC + int cloexec = 0; +#endif +#ifdef O_EXCL + int exclusive = 0; +#endif + + /* check input */ + if (path == NULL) + return NULL; + + /* allocate gzFile structure to return */ + state = (gz_statep)malloc(sizeof(gz_state)); + if (state == NULL) + return NULL; + state->size = 0; /* no buffers allocated yet */ + state->want = GZBUFSIZE; /* requested buffer size */ + state->msg = NULL; /* no error message yet */ + + /* interpret mode */ + state->mode = GZ_NONE; + state->level = Z_DEFAULT_COMPRESSION; + state->strategy = Z_DEFAULT_STRATEGY; + state->direct = 0; + while (*mode) { + if (*mode >= '0' && *mode <= '9') + state->level = *mode - '0'; + else + switch (*mode) { + case 'r': + state->mode = GZ_READ; + break; +#ifndef NO_GZCOMPRESS + case 'w': + state->mode = GZ_WRITE; + break; + case 'a': + state->mode = GZ_APPEND; + break; +#endif + case '+': /* can't read and write at the same time */ + free(state); + return NULL; + case 'b': /* ignore -- will request binary anyway */ + break; +#ifdef O_CLOEXEC + case 'e': + cloexec = 1; + break; +#endif +#ifdef O_EXCL + case 'x': + exclusive = 1; + break; +#endif + case 'f': + state->strategy = Z_FILTERED; + break; + case 'h': + state->strategy = Z_HUFFMAN_ONLY; + break; + case 'R': + state->strategy = Z_RLE; + break; + case 'F': + state->strategy = Z_FIXED; + break; + case 'T': + state->direct = 1; + break; + default: /* could consider as an error, but just ignore */ + ; + } + mode++; + } + + /* must provide an "r", "w", or "a" */ + if (state->mode == GZ_NONE) { + free(state); + return NULL; + } + + /* can't force transparent read */ + if (state->mode == GZ_READ) { + if (state->direct) { + free(state); + return NULL; + } + state->direct = 1; /* for empty file */ + } + + /* save the path name for error messages */ +#ifdef _WIN32 + if (fd == -2) { + len = wcstombs(NULL, path, 0); + if (len == (size_t)-1) + len = 0; + } + else +#endif + len = strlen((const char *)path); + state->path = (char *)malloc(len + 1); + if (state->path == NULL) { + free(state); + return NULL; + } +#ifdef _WIN32 + if (fd == -2) + if (len) + wcstombs(state->path, path, len + 1); + else + *(state->path) = 0; + else +#endif +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(state->path, len + 1, "%s", (const char *)path); +#else + strcpy(state->path, path); +#endif + + /* compute the flags for open() */ + oflag = +#ifdef O_LARGEFILE + O_LARGEFILE | +#endif +#ifdef O_BINARY + O_BINARY | +#endif +#ifdef O_CLOEXEC + (cloexec ? O_CLOEXEC : 0) | +#endif + (state->mode == GZ_READ ? + O_RDONLY : + (O_WRONLY | O_CREAT | +#ifdef O_EXCL + (exclusive ? O_EXCL : 0) | +#endif + (state->mode == GZ_WRITE ? + O_TRUNC : + O_APPEND))); + + /* open the file with the appropriate flags (or just use fd) */ + state->fd = fd > -1 ? fd : ( +#ifdef _WIN32 + fd == -2 ? _wopen(path, oflag, 0666) : +#endif + open((const char *)path, oflag, 0666)); + if (state->fd == -1) { + free(state->path); + free(state); + return NULL; + } + if (state->mode == GZ_APPEND) + state->mode = GZ_WRITE; /* simplify later checks */ + + /* save the current position for rewinding (only if reading) */ + if (state->mode == GZ_READ) { + state->start = LSEEK(state->fd, 0, SEEK_CUR); + if (state->start == -1) state->start = 0; + } + + /* initialize stream */ + gz_reset(state); + + /* return stream */ + return (gzFile)state; +} + +/* -- see zlib.h -- */ +gzFile ZEXPORT gzopen(path, mode) + const char *path; + const char *mode; +{ + return gz_open(path, -1, mode); +} + +/* -- see zlib.h -- */ +gzFile ZEXPORT gzopen64(path, mode) + const char *path; + const char *mode; +{ + return gz_open(path, -1, mode); +} + +/* -- see zlib.h -- */ +gzFile ZEXPORT gzdopen(fd, mode) + int fd; + const char *mode; +{ + char *path; /* identifier for error messages */ + gzFile gz; + + if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL) + return NULL; +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(path, 7 + 3 * sizeof(int), "", fd); /* for debugging */ +#else + sprintf(path, "", fd); /* for debugging */ +#endif + gz = gz_open(path, fd, mode); + free(path); + return gz; +} + +/* -- see zlib.h -- */ +#ifdef _WIN32 +gzFile ZEXPORT gzopen_w(path, mode) + const wchar_t *path; + const char *mode; +{ + return gz_open(path, -2, mode); +} +#endif + +/* -- see zlib.h -- */ +int ZEXPORT gzbuffer(file, size) + gzFile file; + unsigned size; +{ + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return -1; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return -1; + + /* make sure we haven't already allocated memory */ + if (state->size != 0) + return -1; + + /* check and set requested size */ + if (size < 2) + size = 2; /* need two bytes to check magic header */ + state->want = size; + return 0; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzrewind(file) + gzFile file; +{ + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + + /* check that we're reading and that there's no error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) + return -1; + + /* back up and start over */ + if (LSEEK(state->fd, state->start, SEEK_SET) == -1) + return -1; + gz_reset(state); + return 0; +} + +/* -- see zlib.h -- */ +z_off64_t ZEXPORT gzseek64(file, offset, whence) + gzFile file; + z_off64_t offset; + int whence; +{ + unsigned n; + z_off64_t ret; + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return -1; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return -1; + + /* check that there's no error */ + if (state->err != Z_OK && state->err != Z_BUF_ERROR) + return -1; + + /* can only seek from start or relative to current position */ + if (whence != SEEK_SET && whence != SEEK_CUR) + return -1; + + /* normalize offset to a SEEK_CUR specification */ + if (whence == SEEK_SET) + offset -= state->x.pos; + else if (state->seek) + offset += state->skip; + state->seek = 0; + + /* if within raw area while reading, just go there */ + if (state->mode == GZ_READ && state->how == COPY && + state->x.pos + offset >= 0) { + ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR); + if (ret == -1) + return -1; + state->x.have = 0; + state->eof = 0; + state->past = 0; + state->seek = 0; + gz_error(state, Z_OK, NULL); + state->strm.avail_in = 0; + state->x.pos += offset; + return state->x.pos; + } + + /* calculate skip amount, rewinding if needed for back seek when reading */ + if (offset < 0) { + if (state->mode != GZ_READ) /* writing -- can't go backwards */ + return -1; + offset += state->x.pos; + if (offset < 0) /* before start of file! */ + return -1; + if (gzrewind(file) == -1) /* rewind, then skip to offset */ + return -1; + } + + /* if reading, skip what's in output buffer (one less gzgetc() check) */ + if (state->mode == GZ_READ) { + n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ? + (unsigned)offset : state->x.have; + state->x.have -= n; + state->x.next += n; + state->x.pos += n; + offset -= n; + } + + /* request skip (if not zero) */ + if (offset) { + state->seek = 1; + state->skip = offset; + } + return state->x.pos + offset; +} + +/* -- see zlib.h -- */ +z_off_t ZEXPORT gzseek(file, offset, whence) + gzFile file; + z_off_t offset; + int whence; +{ + z_off64_t ret; + + ret = gzseek64(file, (z_off64_t)offset, whence); + return ret == (z_off_t)ret ? (z_off_t)ret : -1; +} + +/* -- see zlib.h -- */ +z_off64_t ZEXPORT gztell64(file) + gzFile file; +{ + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return -1; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return -1; + + /* return position */ + return state->x.pos + (state->seek ? state->skip : 0); +} + +/* -- see zlib.h -- */ +z_off_t ZEXPORT gztell(file) + gzFile file; +{ + z_off64_t ret; + + ret = gztell64(file); + return ret == (z_off_t)ret ? (z_off_t)ret : -1; +} + +/* -- see zlib.h -- */ +z_off64_t ZEXPORT gzoffset64(file) + gzFile file; +{ + z_off64_t offset; + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return -1; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return -1; + + /* compute and return effective offset in file */ + offset = LSEEK(state->fd, 0, SEEK_CUR); + if (offset == -1) + return -1; + if (state->mode == GZ_READ) /* reading */ + offset -= state->strm.avail_in; /* don't count buffered input */ + return offset; +} + +/* -- see zlib.h -- */ +z_off_t ZEXPORT gzoffset(file) + gzFile file; +{ + z_off64_t ret; + + ret = gzoffset64(file); + return ret == (z_off_t)ret ? (z_off_t)ret : -1; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzeof(file) + gzFile file; +{ + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return 0; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return 0; + + /* return end-of-file state */ + return state->mode == GZ_READ ? state->past : 0; +} + +/* -- see zlib.h -- */ +const char * ZEXPORT gzerror(file, errnum) + gzFile file; + int *errnum; +{ + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return NULL; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return NULL; + + /* return error information */ + if (errnum != NULL) + *errnum = state->err; + return state->err == Z_MEM_ERROR ? "out of memory" : + (state->msg == NULL ? "" : state->msg); +} + +/* -- see zlib.h -- */ +void ZEXPORT gzclearerr(file) + gzFile file; +{ + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return; + + /* clear error and end-of-file */ + if (state->mode == GZ_READ) { + state->eof = 0; + state->past = 0; + } + gz_error(state, Z_OK, NULL); +} + +/* Create an error message in allocated memory and set state->err and + state->msg accordingly. Free any previous error message already there. Do + not try to free or allocate space if the error is Z_MEM_ERROR (out of + memory). Simply save the error message as a static string. If there is an + allocation failure constructing the error message, then convert the error to + out of memory. */ +void ZLIB_INTERNAL gz_error(state, err, msg) + gz_statep state; + int err; + const char *msg; +{ + /* free previously allocated message and clear */ + if (state->msg != NULL) { + if (state->err != Z_MEM_ERROR) + free(state->msg); + state->msg = NULL; + } + + /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */ + if (err != Z_OK && err != Z_BUF_ERROR) + state->x.have = 0; + + /* set error code, and if no message, then done */ + state->err = err; + if (msg == NULL) + return; + + /* for an out of memory error, return literal string when requested */ + if (err == Z_MEM_ERROR) + return; + + /* construct error message with path */ + if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) == + NULL) { + state->err = Z_MEM_ERROR; + return; + } +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(state->msg, strlen(state->path) + strlen(msg) + 3, + "%s%s%s", state->path, ": ", msg); +#else + strcpy(state->msg, state->path); + strcat(state->msg, ": "); + strcat(state->msg, msg); +#endif + return; +} + +#ifndef INT_MAX +/* portably return maximum value for an int (when limits.h presumed not + available) -- we need to do this to cover cases where 2's complement not + used, since C standard permits 1's complement and sign-bit representations, + otherwise we could just use ((unsigned)-1) >> 1 */ +unsigned ZLIB_INTERNAL gz_intmax() +{ + unsigned p, q; + + p = 1; + do { + q = p; + p <<= 1; + p++; + } while (p > q); + return q >> 1; +} +#endif diff --git a/src/SDL2/external/zlib-1.2.8/gzread.c b/src/SDL2/external/zlib-1.2.8/gzread.c new file mode 100644 index 000000000..bf4538eb2 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/gzread.c @@ -0,0 +1,594 @@ +/* gzread.c -- zlib functions for reading gzip files + * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "gzguts.h" + +/* Local functions */ +local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *)); +local int gz_avail OF((gz_statep)); +local int gz_look OF((gz_statep)); +local int gz_decomp OF((gz_statep)); +local int gz_fetch OF((gz_statep)); +local int gz_skip OF((gz_statep, z_off64_t)); + +/* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from + state->fd, and update state->eof, state->err, and state->msg as appropriate. + This function needs to loop on read(), since read() is not guaranteed to + read the number of bytes requested, depending on the type of descriptor. */ +local int gz_load(state, buf, len, have) + gz_statep state; + unsigned char *buf; + unsigned len; + unsigned *have; +{ + int ret; + + *have = 0; + do { + ret = read(state->fd, buf + *have, len - *have); + if (ret <= 0) + break; + *have += ret; + } while (*have < len); + if (ret < 0) { + gz_error(state, Z_ERRNO, zstrerror()); + return -1; + } + if (ret == 0) + state->eof = 1; + return 0; +} + +/* Load up input buffer and set eof flag if last data loaded -- return -1 on + error, 0 otherwise. Note that the eof flag is set when the end of the input + file is reached, even though there may be unused data in the buffer. Once + that data has been used, no more attempts will be made to read the file. + If strm->avail_in != 0, then the current data is moved to the beginning of + the input buffer, and then the remainder of the buffer is loaded with the + available data from the input file. */ +local int gz_avail(state) + gz_statep state; +{ + unsigned got; + z_streamp strm = &(state->strm); + + if (state->err != Z_OK && state->err != Z_BUF_ERROR) + return -1; + if (state->eof == 0) { + if (strm->avail_in) { /* copy what's there to the start */ + unsigned char *p = state->in; + unsigned const char *q = strm->next_in; + unsigned n = strm->avail_in; + do { + *p++ = *q++; + } while (--n); + } + if (gz_load(state, state->in + strm->avail_in, + state->size - strm->avail_in, &got) == -1) + return -1; + strm->avail_in += got; + strm->next_in = state->in; + } + return 0; +} + +/* Look for gzip header, set up for inflate or copy. state->x.have must be 0. + If this is the first time in, allocate required memory. state->how will be + left unchanged if there is no more input data available, will be set to COPY + if there is no gzip header and direct copying will be performed, or it will + be set to GZIP for decompression. If direct copying, then leftover input + data from the input buffer will be copied to the output buffer. In that + case, all further file reads will be directly to either the output buffer or + a user buffer. If decompressing, the inflate state will be initialized. + gz_look() will return 0 on success or -1 on failure. */ +local int gz_look(state) + gz_statep state; +{ + z_streamp strm = &(state->strm); + + /* allocate read buffers and inflate memory */ + if (state->size == 0) { + /* allocate buffers */ + state->in = (unsigned char *)malloc(state->want); + state->out = (unsigned char *)malloc(state->want << 1); + if (state->in == NULL || state->out == NULL) { + if (state->out != NULL) + free(state->out); + if (state->in != NULL) + free(state->in); + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + state->size = state->want; + + /* allocate inflate memory */ + state->strm.zalloc = Z_NULL; + state->strm.zfree = Z_NULL; + state->strm.opaque = Z_NULL; + state->strm.avail_in = 0; + state->strm.next_in = Z_NULL; + if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) { /* gunzip */ + free(state->out); + free(state->in); + state->size = 0; + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + } + + /* get at least the magic bytes in the input buffer */ + if (strm->avail_in < 2) { + if (gz_avail(state) == -1) + return -1; + if (strm->avail_in == 0) + return 0; + } + + /* look for gzip magic bytes -- if there, do gzip decoding (note: there is + a logical dilemma here when considering the case of a partially written + gzip file, to wit, if a single 31 byte is written, then we cannot tell + whether this is a single-byte file, or just a partially written gzip + file -- for here we assume that if a gzip file is being written, then + the header will be written in a single operation, so that reading a + single byte is sufficient indication that it is not a gzip file) */ + if (strm->avail_in > 1 && + strm->next_in[0] == 31 && strm->next_in[1] == 139) { + inflateReset(strm); + state->how = GZIP; + state->direct = 0; + return 0; + } + + /* no gzip header -- if we were decoding gzip before, then this is trailing + garbage. Ignore the trailing garbage and finish. */ + if (state->direct == 0) { + strm->avail_in = 0; + state->eof = 1; + state->x.have = 0; + return 0; + } + + /* doing raw i/o, copy any leftover input to output -- this assumes that + the output buffer is larger than the input buffer, which also assures + space for gzungetc() */ + state->x.next = state->out; + if (strm->avail_in) { + memcpy(state->x.next, strm->next_in, strm->avail_in); + state->x.have = strm->avail_in; + strm->avail_in = 0; + } + state->how = COPY; + state->direct = 1; + return 0; +} + +/* Decompress from input to the provided next_out and avail_out in the state. + On return, state->x.have and state->x.next point to the just decompressed + data. If the gzip stream completes, state->how is reset to LOOK to look for + the next gzip stream or raw data, once state->x.have is depleted. Returns 0 + on success, -1 on failure. */ +local int gz_decomp(state) + gz_statep state; +{ + int ret = Z_OK; + unsigned had; + z_streamp strm = &(state->strm); + + /* fill output buffer up to end of deflate stream */ + had = strm->avail_out; + do { + /* get more input for inflate() */ + if (strm->avail_in == 0 && gz_avail(state) == -1) + return -1; + if (strm->avail_in == 0) { + gz_error(state, Z_BUF_ERROR, "unexpected end of file"); + break; + } + + /* decompress and handle errors */ + ret = inflate(strm, Z_NO_FLUSH); + if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) { + gz_error(state, Z_STREAM_ERROR, + "internal error: inflate stream corrupt"); + return -1; + } + if (ret == Z_MEM_ERROR) { + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + if (ret == Z_DATA_ERROR) { /* deflate stream invalid */ + gz_error(state, Z_DATA_ERROR, + strm->msg == NULL ? "compressed data error" : strm->msg); + return -1; + } + } while (strm->avail_out && ret != Z_STREAM_END); + + /* update available output */ + state->x.have = had - strm->avail_out; + state->x.next = strm->next_out - state->x.have; + + /* if the gzip stream completed successfully, look for another */ + if (ret == Z_STREAM_END) + state->how = LOOK; + + /* good decompression */ + return 0; +} + +/* Fetch data and put it in the output buffer. Assumes state->x.have is 0. + Data is either copied from the input file or decompressed from the input + file depending on state->how. If state->how is LOOK, then a gzip header is + looked for to determine whether to copy or decompress. Returns -1 on error, + otherwise 0. gz_fetch() will leave state->how as COPY or GZIP unless the + end of the input file has been reached and all data has been processed. */ +local int gz_fetch(state) + gz_statep state; +{ + z_streamp strm = &(state->strm); + + do { + switch(state->how) { + case LOOK: /* -> LOOK, COPY (only if never GZIP), or GZIP */ + if (gz_look(state) == -1) + return -1; + if (state->how == LOOK) + return 0; + break; + case COPY: /* -> COPY */ + if (gz_load(state, state->out, state->size << 1, &(state->x.have)) + == -1) + return -1; + state->x.next = state->out; + return 0; + case GZIP: /* -> GZIP or LOOK (if end of gzip stream) */ + strm->avail_out = state->size << 1; + strm->next_out = state->out; + if (gz_decomp(state) == -1) + return -1; + } + } while (state->x.have == 0 && (!state->eof || strm->avail_in)); + return 0; +} + +/* Skip len uncompressed bytes of output. Return -1 on error, 0 on success. */ +local int gz_skip(state, len) + gz_statep state; + z_off64_t len; +{ + unsigned n; + + /* skip over len bytes or reach end-of-file, whichever comes first */ + while (len) + /* skip over whatever is in output buffer */ + if (state->x.have) { + n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ? + (unsigned)len : state->x.have; + state->x.have -= n; + state->x.next += n; + state->x.pos += n; + len -= n; + } + + /* output buffer empty -- return if we're at the end of the input */ + else if (state->eof && state->strm.avail_in == 0) + break; + + /* need more data to skip -- load up output buffer */ + else { + /* get more output, looking for header if required */ + if (gz_fetch(state) == -1) + return -1; + } + return 0; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzread(file, buf, len) + gzFile file; + voidp buf; + unsigned len; +{ + unsigned got, n; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) + return -1; + + /* since an int is returned, make sure len fits in one, otherwise return + with an error (this avoids the flaw in the interface) */ + if ((int)len < 0) { + gz_error(state, Z_DATA_ERROR, "requested length does not fit in int"); + return -1; + } + + /* if len is zero, avoid unnecessary operations */ + if (len == 0) + return 0; + + /* process a skip request */ + if (state->seek) { + state->seek = 0; + if (gz_skip(state, state->skip) == -1) + return -1; + } + + /* get len bytes to buf, or less than len if at the end */ + got = 0; + do { + /* first just try copying data from the output buffer */ + if (state->x.have) { + n = state->x.have > len ? len : state->x.have; + memcpy(buf, state->x.next, n); + state->x.next += n; + state->x.have -= n; + } + + /* output buffer empty -- return if we're at the end of the input */ + else if (state->eof && strm->avail_in == 0) { + state->past = 1; /* tried to read past end */ + break; + } + + /* need output data -- for small len or new stream load up our output + buffer */ + else if (state->how == LOOK || len < (state->size << 1)) { + /* get more output, looking for header if required */ + if (gz_fetch(state) == -1) + return -1; + continue; /* no progress yet -- go back to copy above */ + /* the copy above assures that we will leave with space in the + output buffer, allowing at least one gzungetc() to succeed */ + } + + /* large len -- read directly into user buffer */ + else if (state->how == COPY) { /* read directly */ + if (gz_load(state, (unsigned char *)buf, len, &n) == -1) + return -1; + } + + /* large len -- decompress directly into user buffer */ + else { /* state->how == GZIP */ + strm->avail_out = len; + strm->next_out = (unsigned char *)buf; + if (gz_decomp(state) == -1) + return -1; + n = state->x.have; + state->x.have = 0; + } + + /* update progress */ + len -= n; + buf = (char *)buf + n; + got += n; + state->x.pos += n; + } while (len); + + /* return number of bytes read into user buffer (will fit in int) */ + return (int)got; +} + +/* -- see zlib.h -- */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +#else +# undef gzgetc +#endif +int ZEXPORT gzgetc(file) + gzFile file; +{ + int ret; + unsigned char buf[1]; + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) + return -1; + + /* try output buffer (no need to check for skip request) */ + if (state->x.have) { + state->x.have--; + state->x.pos++; + return *(state->x.next)++; + } + + /* nothing there -- try gzread() */ + ret = gzread(file, buf, 1); + return ret < 1 ? -1 : buf[0]; +} + +int ZEXPORT gzgetc_(file) +gzFile file; +{ + return gzgetc(file); +} + +/* -- see zlib.h -- */ +int ZEXPORT gzungetc(c, file) + int c; + gzFile file; +{ + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) + return -1; + + /* process a skip request */ + if (state->seek) { + state->seek = 0; + if (gz_skip(state, state->skip) == -1) + return -1; + } + + /* can't push EOF */ + if (c < 0) + return -1; + + /* if output buffer empty, put byte at end (allows more pushing) */ + if (state->x.have == 0) { + state->x.have = 1; + state->x.next = state->out + (state->size << 1) - 1; + state->x.next[0] = c; + state->x.pos--; + state->past = 0; + return c; + } + + /* if no room, give up (must have already done a gzungetc()) */ + if (state->x.have == (state->size << 1)) { + gz_error(state, Z_DATA_ERROR, "out of room to push characters"); + return -1; + } + + /* slide output data if needed and insert byte before existing data */ + if (state->x.next == state->out) { + unsigned char *src = state->out + state->x.have; + unsigned char *dest = state->out + (state->size << 1); + while (src > state->out) + *--dest = *--src; + state->x.next = dest; + } + state->x.have++; + state->x.next--; + state->x.next[0] = c; + state->x.pos--; + state->past = 0; + return c; +} + +/* -- see zlib.h -- */ +char * ZEXPORT gzgets(file, buf, len) + gzFile file; + char *buf; + int len; +{ + unsigned left, n; + char *str; + unsigned char *eol; + gz_statep state; + + /* check parameters and get internal structure */ + if (file == NULL || buf == NULL || len < 1) + return NULL; + state = (gz_statep)file; + + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) + return NULL; + + /* process a skip request */ + if (state->seek) { + state->seek = 0; + if (gz_skip(state, state->skip) == -1) + return NULL; + } + + /* copy output bytes up to new line or len - 1, whichever comes first -- + append a terminating zero to the string (we don't check for a zero in + the contents, let the user worry about that) */ + str = buf; + left = (unsigned)len - 1; + if (left) do { + /* assure that something is in the output buffer */ + if (state->x.have == 0 && gz_fetch(state) == -1) + return NULL; /* error */ + if (state->x.have == 0) { /* end of file */ + state->past = 1; /* read past end */ + break; /* return what we have */ + } + + /* look for end-of-line in current output buffer */ + n = state->x.have > left ? left : state->x.have; + eol = (unsigned char *)memchr(state->x.next, '\n', n); + if (eol != NULL) + n = (unsigned)(eol - state->x.next) + 1; + + /* copy through end-of-line, or remainder if not found */ + memcpy(buf, state->x.next, n); + state->x.have -= n; + state->x.next += n; + state->x.pos += n; + left -= n; + buf += n; + } while (left && eol == NULL); + + /* return terminated string, or if nothing, end of file */ + if (buf == str) + return NULL; + buf[0] = 0; + return str; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzdirect(file) + gzFile file; +{ + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return 0; + state = (gz_statep)file; + + /* if the state is not known, but we can find out, then do so (this is + mainly for right after a gzopen() or gzdopen()) */ + if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0) + (void)gz_look(state); + + /* return 1 if transparent, 0 if processing a gzip stream */ + return state->direct; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzclose_r(file) + gzFile file; +{ + int ret, err; + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return Z_STREAM_ERROR; + state = (gz_statep)file; + + /* check that we're reading */ + if (state->mode != GZ_READ) + return Z_STREAM_ERROR; + + /* free memory and close file */ + if (state->size) { + inflateEnd(&(state->strm)); + free(state->out); + free(state->in); + } + err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK; + gz_error(state, Z_OK, NULL); + free(state->path); + ret = close(state->fd); + free(state); + return ret ? Z_ERRNO : err; +} diff --git a/src/SDL2/external/zlib-1.2.8/gzwrite.c b/src/SDL2/external/zlib-1.2.8/gzwrite.c new file mode 100644 index 000000000..aa767fbf6 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/gzwrite.c @@ -0,0 +1,577 @@ +/* gzwrite.c -- zlib functions for writing gzip files + * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "gzguts.h" + +/* Local functions */ +local int gz_init OF((gz_statep)); +local int gz_comp OF((gz_statep, int)); +local int gz_zero OF((gz_statep, z_off64_t)); + +/* Initialize state for writing a gzip file. Mark initialization by setting + state->size to non-zero. Return -1 on failure or 0 on success. */ +local int gz_init(state) + gz_statep state; +{ + int ret; + z_streamp strm = &(state->strm); + + /* allocate input buffer */ + state->in = (unsigned char *)malloc(state->want); + if (state->in == NULL) { + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + + /* only need output buffer and deflate state if compressing */ + if (!state->direct) { + /* allocate output buffer */ + state->out = (unsigned char *)malloc(state->want); + if (state->out == NULL) { + free(state->in); + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + + /* allocate deflate memory, set up for gzip compression */ + strm->zalloc = Z_NULL; + strm->zfree = Z_NULL; + strm->opaque = Z_NULL; + ret = deflateInit2(strm, state->level, Z_DEFLATED, + MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy); + if (ret != Z_OK) { + free(state->out); + free(state->in); + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + } + + /* mark state as initialized */ + state->size = state->want; + + /* initialize write buffer if compressing */ + if (!state->direct) { + strm->avail_out = state->size; + strm->next_out = state->out; + state->x.next = strm->next_out; + } + return 0; +} + +/* Compress whatever is at avail_in and next_in and write to the output file. + Return -1 if there is an error writing to the output file, otherwise 0. + flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH, + then the deflate() state is reset to start a new gzip stream. If gz->direct + is true, then simply write to the output file without compressing, and + ignore flush. */ +local int gz_comp(state, flush) + gz_statep state; + int flush; +{ + int ret, got; + unsigned have; + z_streamp strm = &(state->strm); + + /* allocate memory if this is the first time through */ + if (state->size == 0 && gz_init(state) == -1) + return -1; + + /* write directly if requested */ + if (state->direct) { + got = write(state->fd, strm->next_in, strm->avail_in); + if (got < 0 || (unsigned)got != strm->avail_in) { + gz_error(state, Z_ERRNO, zstrerror()); + return -1; + } + strm->avail_in = 0; + return 0; + } + + /* run deflate() on provided input until it produces no more output */ + ret = Z_OK; + do { + /* write out current buffer contents if full, or if flushing, but if + doing Z_FINISH then don't write until we get to Z_STREAM_END */ + if (strm->avail_out == 0 || (flush != Z_NO_FLUSH && + (flush != Z_FINISH || ret == Z_STREAM_END))) { + have = (unsigned)(strm->next_out - state->x.next); + if (have && ((got = write(state->fd, state->x.next, have)) < 0 || + (unsigned)got != have)) { + gz_error(state, Z_ERRNO, zstrerror()); + return -1; + } + if (strm->avail_out == 0) { + strm->avail_out = state->size; + strm->next_out = state->out; + } + state->x.next = strm->next_out; + } + + /* compress */ + have = strm->avail_out; + ret = deflate(strm, flush); + if (ret == Z_STREAM_ERROR) { + gz_error(state, Z_STREAM_ERROR, + "internal error: deflate stream corrupt"); + return -1; + } + have -= strm->avail_out; + } while (have); + + /* if that completed a deflate stream, allow another to start */ + if (flush == Z_FINISH) + deflateReset(strm); + + /* all done, no errors */ + return 0; +} + +/* Compress len zeros to output. Return -1 on error, 0 on success. */ +local int gz_zero(state, len) + gz_statep state; + z_off64_t len; +{ + int first; + unsigned n; + z_streamp strm = &(state->strm); + + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return -1; + + /* compress len zeros (len guaranteed > 0) */ + first = 1; + while (len) { + n = GT_OFF(state->size) || (z_off64_t)state->size > len ? + (unsigned)len : state->size; + if (first) { + memset(state->in, 0, n); + first = 0; + } + strm->avail_in = n; + strm->next_in = state->in; + state->x.pos += n; + if (gz_comp(state, Z_NO_FLUSH) == -1) + return -1; + len -= n; + } + return 0; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzwrite(file, buf, len) + gzFile file; + voidpc buf; + unsigned len; +{ + unsigned put = len; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return 0; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return 0; + + /* since an int is returned, make sure len fits in one, otherwise return + with an error (this avoids the flaw in the interface) */ + if ((int)len < 0) { + gz_error(state, Z_DATA_ERROR, "requested length does not fit in int"); + return 0; + } + + /* if len is zero, avoid unnecessary operations */ + if (len == 0) + return 0; + + /* allocate memory if this is the first time through */ + if (state->size == 0 && gz_init(state) == -1) + return 0; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return 0; + } + + /* for small len, copy to input buffer, otherwise compress directly */ + if (len < state->size) { + /* copy to input buffer, compress when full */ + do { + unsigned have, copy; + + if (strm->avail_in == 0) + strm->next_in = state->in; + have = (unsigned)((strm->next_in + strm->avail_in) - state->in); + copy = state->size - have; + if (copy > len) + copy = len; + memcpy(state->in + have, buf, copy); + strm->avail_in += copy; + state->x.pos += copy; + buf = (const char *)buf + copy; + len -= copy; + if (len && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + } while (len); + } + else { + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + + /* directly compress user buffer to file */ + strm->avail_in = len; + strm->next_in = (z_const Bytef *)buf; + state->x.pos += len; + if (gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + } + + /* input was all buffered or compressed (put will fit in int) */ + return (int)put; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzputc(file, c) + gzFile file; + int c; +{ + unsigned have; + unsigned char buf[1]; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return -1; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return -1; + } + + /* try writing to input buffer for speed (state->size == 0 if buffer not + initialized) */ + if (state->size) { + if (strm->avail_in == 0) + strm->next_in = state->in; + have = (unsigned)((strm->next_in + strm->avail_in) - state->in); + if (have < state->size) { + state->in[have] = c; + strm->avail_in++; + state->x.pos++; + return c & 0xff; + } + } + + /* no room in buffer or not initialized, use gz_write() */ + buf[0] = c; + if (gzwrite(file, buf, 1) != 1) + return -1; + return c & 0xff; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzputs(file, str) + gzFile file; + const char *str; +{ + int ret; + unsigned len; + + /* write string */ + len = (unsigned)strlen(str); + ret = gzwrite(file, str, len); + return ret == 0 && len != 0 ? -1 : ret; +} + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +#include + +/* -- see zlib.h -- */ +int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va) +{ + int size, len; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return 0; + + /* make sure we have some buffer space */ + if (state->size == 0 && gz_init(state) == -1) + return 0; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return 0; + } + + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + + /* do the printf() into the input buffer, put length in len */ + size = (int)(state->size); + state->in[size - 1] = 0; +#ifdef NO_vsnprintf +# ifdef HAS_vsprintf_void + (void)vsprintf((char *)(state->in), format, va); + for (len = 0; len < size; len++) + if (state->in[len] == 0) break; +# else + len = vsprintf((char *)(state->in), format, va); +# endif +#else +# ifdef HAS_vsnprintf_void + (void)vsnprintf((char *)(state->in), size, format, va); + len = strlen((char *)(state->in)); +# else + len = vsnprintf((char *)(state->in), size, format, va); +# endif +#endif + + /* check that printf() results fit in buffer */ + if (len <= 0 || len >= (int)size || state->in[size - 1] != 0) + return 0; + + /* update buffer and position, defer compression until needed */ + strm->avail_in = (unsigned)len; + strm->next_in = state->in; + state->x.pos += len; + return len; +} + +int ZEXPORTVA gzprintf(gzFile file, const char *format, ...) +{ + va_list va; + int ret; + + va_start(va, format); + ret = gzvprintf(file, format, va); + va_end(va); + return ret; +} + +#else /* !STDC && !Z_HAVE_STDARG_H */ + +/* -- see zlib.h -- */ +int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20) + gzFile file; + const char *format; + int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20; +{ + int size, len; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that can really pass pointer in ints */ + if (sizeof(int) != sizeof(void *)) + return 0; + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return 0; + + /* make sure we have some buffer space */ + if (state->size == 0 && gz_init(state) == -1) + return 0; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return 0; + } + + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + + /* do the printf() into the input buffer, put length in len */ + size = (int)(state->size); + state->in[size - 1] = 0; +#ifdef NO_snprintf +# ifdef HAS_sprintf_void + sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + for (len = 0; len < size; len++) + if (state->in[len] == 0) break; +# else + len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); +# endif +#else +# ifdef HAS_snprintf_void + snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + len = strlen((char *)(state->in)); +# else + len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, + a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, + a19, a20); +# endif +#endif + + /* check that printf() results fit in buffer */ + if (len <= 0 || len >= (int)size || state->in[size - 1] != 0) + return 0; + + /* update buffer and position, defer compression until needed */ + strm->avail_in = (unsigned)len; + strm->next_in = state->in; + state->x.pos += len; + return len; +} + +#endif + +/* -- see zlib.h -- */ +int ZEXPORT gzflush(file, flush) + gzFile file; + int flush; +{ + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return Z_STREAM_ERROR; + + /* check flush parameter */ + if (flush < 0 || flush > Z_FINISH) + return Z_STREAM_ERROR; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return -1; + } + + /* compress remaining data with requested flush */ + gz_comp(state, flush); + return state->err; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzsetparams(file, level, strategy) + gzFile file; + int level; + int strategy; +{ + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return Z_STREAM_ERROR; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return Z_STREAM_ERROR; + + /* if no change is requested, then do nothing */ + if (level == state->level && strategy == state->strategy) + return Z_OK; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return -1; + } + + /* change compression parameters for subsequent input */ + if (state->size) { + /* flush previous input with previous parameters before changing */ + if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1) + return state->err; + deflateParams(strm, level, strategy); + } + state->level = level; + state->strategy = strategy; + return Z_OK; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzclose_w(file) + gzFile file; +{ + int ret = Z_OK; + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return Z_STREAM_ERROR; + state = (gz_statep)file; + + /* check that we're writing */ + if (state->mode != GZ_WRITE) + return Z_STREAM_ERROR; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + ret = state->err; + } + + /* flush, free memory, and close file */ + if (gz_comp(state, Z_FINISH) == -1) + ret = state->err; + if (state->size) { + if (!state->direct) { + (void)deflateEnd(&(state->strm)); + free(state->out); + } + free(state->in); + } + gz_error(state, Z_OK, NULL); + free(state->path); + if (close(state->fd) == -1) + ret = Z_ERRNO; + free(state); + return ret; +} diff --git a/src/SDL2/external/zlib-1.2.8/infback.c b/src/SDL2/external/zlib-1.2.8/infback.c new file mode 100644 index 000000000..f3833c2e4 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/infback.c @@ -0,0 +1,640 @@ +/* infback.c -- inflate using a call-back interface + * Copyright (C) 1995-2011 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + This code is largely copied from inflate.c. Normally either infback.o or + inflate.o would be linked into an application--not both. The interface + with inffast.c is retained so that optimized assembler-coded versions of + inflate_fast() can be used with either inflate.c or infback.c. + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +/* function prototypes */ +local void fixedtables OF((struct inflate_state FAR *state)); + +/* + strm provides memory allocation functions in zalloc and zfree, or + Z_NULL to use the library memory allocation functions. + + windowBits is in the range 8..15, and window is a user-supplied + window and output buffer that is 2**windowBits bytes. + */ +int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size) +z_streamp strm; +int windowBits; +unsigned char FAR *window; +const char *version; +int stream_size; +{ + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL || window == Z_NULL || + windowBits < 8 || windowBits > 15) + return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; +#endif + } + if (strm->zfree == (free_func)0) +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zfree = zcfree; +#endif + state = (struct inflate_state FAR *)ZALLOC(strm, 1, + sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (struct internal_state FAR *)state; + state->dmax = 32768U; + state->wbits = windowBits; + state->wsize = 1U << windowBits; + state->window = window; + state->wnext = 0; + state->whave = 0; + return Z_OK; +} + +/* + Return state with length and distance decoding tables and index sizes set to + fixed code decoding. Normally this returns fixed tables from inffixed.h. + If BUILDFIXED is defined, then instead this routine builds the tables the + first time it's called, and returns those tables the first time and + thereafter. This reduces the size of the code by about 2K bytes, in + exchange for a little execution time. However, BUILDFIXED should not be + used for threaded applications, since the rewriting of the tables and virgin + may not be thread-safe. + */ +local void fixedtables(state) +struct inflate_state FAR *state; +{ +#ifdef BUILDFIXED + static int virgin = 1; + static code *lenfix, *distfix; + static code fixed[544]; + + /* build fixed huffman tables if first call (may not be thread safe) */ + if (virgin) { + unsigned sym, bits; + static code *next; + + /* literal/length table */ + sym = 0; + while (sym < 144) state->lens[sym++] = 8; + while (sym < 256) state->lens[sym++] = 9; + while (sym < 280) state->lens[sym++] = 7; + while (sym < 288) state->lens[sym++] = 8; + next = fixed; + lenfix = next; + bits = 9; + inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); + + /* distance table */ + sym = 0; + while (sym < 32) state->lens[sym++] = 5; + distfix = next; + bits = 5; + inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); + + /* do this just once */ + virgin = 0; + } +#else /* !BUILDFIXED */ +# include "inffixed.h" +#endif /* BUILDFIXED */ + state->lencode = lenfix; + state->lenbits = 9; + state->distcode = distfix; + state->distbits = 5; +} + +/* Macros for inflateBack(): */ + +/* Load returned state from inflate_fast() */ +#define LOAD() \ + do { \ + put = strm->next_out; \ + left = strm->avail_out; \ + next = strm->next_in; \ + have = strm->avail_in; \ + hold = state->hold; \ + bits = state->bits; \ + } while (0) + +/* Set state from registers for inflate_fast() */ +#define RESTORE() \ + do { \ + strm->next_out = put; \ + strm->avail_out = left; \ + strm->next_in = next; \ + strm->avail_in = have; \ + state->hold = hold; \ + state->bits = bits; \ + } while (0) + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Assure that some input is available. If input is requested, but denied, + then return a Z_BUF_ERROR from inflateBack(). */ +#define PULL() \ + do { \ + if (have == 0) { \ + have = in(in_desc, &next); \ + if (have == 0) { \ + next = Z_NULL; \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflateBack() + with an error if there is no input available. */ +#define PULLBYTE() \ + do { \ + PULL(); \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflateBack() with + an error. */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n < 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Assure that some output space is available, by writing out the window + if it's full. If the write fails, return from inflateBack() with a + Z_BUF_ERROR. */ +#define ROOM() \ + do { \ + if (left == 0) { \ + put = state->window; \ + left = state->wsize; \ + state->whave = left; \ + if (out(out_desc, put, left)) { \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* + strm provides the memory allocation functions and window buffer on input, + and provides information on the unused input on return. For Z_DATA_ERROR + returns, strm will also provide an error message. + + in() and out() are the call-back input and output functions. When + inflateBack() needs more input, it calls in(). When inflateBack() has + filled the window with output, or when it completes with data in the + window, it calls out() to write out the data. The application must not + change the provided input until in() is called again or inflateBack() + returns. The application must not change the window/output buffer until + inflateBack() returns. + + in() and out() are called with a descriptor parameter provided in the + inflateBack() call. This parameter can be a structure that provides the + information required to do the read or write, as well as accumulated + information on the input and output such as totals and check values. + + in() should return zero on failure. out() should return non-zero on + failure. If either in() or out() fails, than inflateBack() returns a + Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it + was in() or out() that caused in the error. Otherwise, inflateBack() + returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format + error, or Z_MEM_ERROR if it could not allocate memory for the state. + inflateBack() can also return Z_STREAM_ERROR if the input parameters + are not correct, i.e. strm is Z_NULL or the state was not initialized. + */ +int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc) +z_streamp strm; +in_func in; +void FAR *in_desc; +out_func out; +void FAR *out_desc; +{ + struct inflate_state FAR *state; + z_const unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have, left; /* available input and output */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code here; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + /* Check that the strm exists and that the state was initialized */ + if (strm == Z_NULL || strm->state == Z_NULL) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* Reset the state */ + strm->msg = Z_NULL; + state->mode = TYPE; + state->last = 0; + state->whave = 0; + next = strm->next_in; + have = next != Z_NULL ? strm->avail_in : 0; + hold = 0; + bits = 0; + put = state->window; + left = state->wsize; + + /* Inflate until end of block marked as last */ + for (;;) + switch (state->mode) { + case TYPE: + /* determine and dispatch block type */ + if (state->last) { + BYTEBITS(); + state->mode = DONE; + break; + } + NEEDBITS(3); + state->last = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + state->last ? " (last)" : "")); + state->mode = STORED; + break; + case 1: /* fixed block */ + fixedtables(state); + Tracev((stderr, "inflate: fixed codes block%s\n", + state->last ? " (last)" : "")); + state->mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + state->last ? " (last)" : "")); + state->mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + state->mode = BAD; + } + DROPBITS(2); + break; + + case STORED: + /* get and verify stored block length */ + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + state->mode = BAD; + break; + } + state->length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %u\n", + state->length)); + INITBITS(); + + /* copy stored block from input to output */ + while (state->length != 0) { + copy = state->length; + PULL(); + ROOM(); + if (copy > have) copy = have; + if (copy > left) copy = left; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + state->length -= copy; + } + Tracev((stderr, "inflate: stored end\n")); + state->mode = TYPE; + break; + + case TABLE: + /* get dynamic table entries descriptor */ + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); +#ifndef PKZIP_BUG_WORKAROUND + if (state->nlen > 286 || state->ndist > 30) { + strm->msg = (char *)"too many length or distance symbols"; + state->mode = BAD; + break; + } +#endif + Tracev((stderr, "inflate: table sizes ok\n")); + + /* get code length code lengths (not a typo) */ + state->have = 0; + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 7; + ret = inflate_table(CODES, state->lens, 19, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + + /* get length and distance code code lengths */ + state->have = 0; + while (state->have < state->nlen + state->ndist) { + for (;;) { + here = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.val < 16) { + DROPBITS(here.bits); + state->lens[state->have++] = here.val; + } + else { + if (here.val == 16) { + NEEDBITS(here.bits + 2); + DROPBITS(here.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + len = (unsigned)(state->lens[state->have - 1]); + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (here.val == 17) { + NEEDBITS(here.bits + 3); + DROPBITS(here.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(here.bits + 7); + DROPBITS(here.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (state->mode == BAD) break; + + /* check for end-of-block code (better have one) */ + if (state->lens[256] == 0) { + strm->msg = (char *)"invalid code -- missing end-of-block"; + state->mode = BAD; + break; + } + + /* build code tables -- note: do not change the lenbits or distbits + values here (9 and 6) without reading the comments in inftrees.h + concerning the ENOUGH constants, which depend on those values */ + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 9; + ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + state->mode = BAD; + break; + } + state->distcode = (code const FAR *)(state->next); + state->distbits = 6; + ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, + &(state->next), &(state->distbits), state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + state->mode = LEN; + + case LEN: + /* use inflate_fast() if we have enough input and output */ + if (have >= 6 && left >= 258) { + RESTORE(); + if (state->whave < state->wsize) + state->whave = state->wsize - left; + inflate_fast(strm, state->wsize); + LOAD(); + break; + } + + /* get a literal, length, or end-of-block code */ + for (;;) { + here = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.op && (here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = state->lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + state->length = (unsigned)here.val; + + /* process literal */ + if (here.op == 0) { + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); + ROOM(); + *put++ = (unsigned char)(state->length); + left--; + state->mode = LEN; + break; + } + + /* process end of block */ + if (here.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + + /* invalid code */ + if (here.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + + /* length code -- get extra bits, if any */ + state->extra = (unsigned)(here.op) & 15; + if (state->extra != 0) { + NEEDBITS(state->extra); + state->length += BITS(state->extra); + DROPBITS(state->extra); + } + Tracevv((stderr, "inflate: length %u\n", state->length)); + + /* get distance code */ + for (;;) { + here = state->distcode[BITS(state->distbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if ((here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = state->distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + if (here.op & 64) { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + state->offset = (unsigned)here.val; + + /* get distance extra bits, if any */ + state->extra = (unsigned)(here.op) & 15; + if (state->extra != 0) { + NEEDBITS(state->extra); + state->offset += BITS(state->extra); + DROPBITS(state->extra); + } + if (state->offset > state->wsize - (state->whave < state->wsize ? + left : 0)) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %u\n", state->offset)); + + /* copy match from window to output */ + do { + ROOM(); + copy = state->wsize - state->offset; + if (copy < left) { + from = put + copy; + copy = left - copy; + } + else { + from = put - state->offset; + copy = left; + } + if (copy > state->length) copy = state->length; + state->length -= copy; + left -= copy; + do { + *put++ = *from++; + } while (--copy); + } while (state->length != 0); + break; + + case DONE: + /* inflate stream terminated properly -- write leftover output */ + ret = Z_STREAM_END; + if (left < state->wsize) { + if (out(out_desc, state->window, state->wsize - left)) + ret = Z_BUF_ERROR; + } + goto inf_leave; + + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + + default: /* can't happen, but makes compilers happy */ + ret = Z_STREAM_ERROR; + goto inf_leave; + } + + /* Return unused input */ + inf_leave: + strm->next_in = next; + strm->avail_in = have; + return ret; +} + +int ZEXPORT inflateBackEnd(strm) +z_streamp strm; +{ + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} diff --git a/src/SDL2/external/zlib-1.2.8/inffast.c b/src/SDL2/external/zlib-1.2.8/inffast.c new file mode 100644 index 000000000..bda59ceb6 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/inffast.c @@ -0,0 +1,340 @@ +/* inffast.c -- fast decoding + * Copyright (C) 1995-2008, 2010, 2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +#ifndef ASMINF + +/* Allow machine dependent optimization for post-increment or pre-increment. + Based on testing to date, + Pre-increment preferred for: + - PowerPC G3 (Adler) + - MIPS R5000 (Randers-Pehrson) + Post-increment preferred for: + - none + No measurable difference: + - Pentium III (Anderson) + - M68060 (Nikl) + */ +#ifdef POSTINC +# define OFF 0 +# define PUP(a) *(a)++ +#else +# define OFF 1 +# define PUP(a) *++(a) +#endif + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ +void ZLIB_INTERNAL inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + z_const unsigned char FAR *in; /* local strm->next_in */ + z_const unsigned char FAR *last; /* have enough input while in < last */ + unsigned char FAR *out; /* local strm->next_out */ + unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ + unsigned char FAR *end; /* while out < end, enough space available */ +#ifdef INFLATE_STRICT + unsigned dmax; /* maximum distance from zlib header */ +#endif + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned wnext; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ + unsigned long hold; /* local strm->hold */ + unsigned bits; /* local strm->bits */ + code const FAR *lcode; /* local strm->lencode */ + code const FAR *dcode; /* local strm->distcode */ + unsigned lmask; /* mask for first level of length codes */ + unsigned dmask; /* mask for first level of distance codes */ + code here; /* retrieved table entry */ + unsigned op; /* code bits, operation, extra bits, or */ + /* window position, window bytes to copy */ + unsigned len; /* match length, unused bytes */ + unsigned dist; /* match distance */ + unsigned char FAR *from; /* where to copy match from */ + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + in = strm->next_in - OFF; + last = in + (strm->avail_in - 5); + out = strm->next_out - OFF; + beg = out - (start - strm->avail_out); + end = out + (strm->avail_out - 257); +#ifdef INFLATE_STRICT + dmax = state->dmax; +#endif + wsize = state->wsize; + whave = state->whave; + wnext = state->wnext; + window = state->window; + hold = state->hold; + bits = state->bits; + lcode = state->lencode; + dcode = state->distcode; + lmask = (1U << state->lenbits) - 1; + dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + do { + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + here = lcode[hold & lmask]; + dolen: + op = (unsigned)(here.bits); + hold >>= op; + bits -= op; + op = (unsigned)(here.op); + if (op == 0) { /* literal */ + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); + PUP(out) = (unsigned char)(here.val); + } + else if (op & 16) { /* length base */ + len = (unsigned)(here.val); + op &= 15; /* number of extra bits */ + if (op) { + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + len += (unsigned)hold & ((1U << op) - 1); + hold >>= op; + bits -= op; + } + Tracevv((stderr, "inflate: length %u\n", len)); + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + here = dcode[hold & dmask]; + dodist: + op = (unsigned)(here.bits); + hold >>= op; + bits -= op; + op = (unsigned)(here.op); + if (op & 16) { /* distance base */ + dist = (unsigned)(here.val); + op &= 15; /* number of extra bits */ + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + } + dist += (unsigned)hold & ((1U << op) - 1); +#ifdef INFLATE_STRICT + if (dist > dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + hold >>= op; + bits -= op; + Tracevv((stderr, "inflate: distance %u\n", dist)); + op = (unsigned)(out - beg); /* max distance in output */ + if (dist > op) { /* see if copy from window */ + op = dist - op; /* distance back in window */ + if (op > whave) { + if (state->sane) { + strm->msg = + (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + if (len <= op - whave) { + do { + PUP(out) = 0; + } while (--len); + continue; + } + len -= op - whave; + do { + PUP(out) = 0; + } while (--op > whave); + if (op == 0) { + from = out - dist; + do { + PUP(out) = PUP(from); + } while (--len); + continue; + } +#endif + } + from = window - OFF; + if (wnext == 0) { /* very common case */ + from += wsize - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + else if (wnext < op) { /* wrap around window */ + from += wsize + wnext - op; + op -= wnext; + if (op < len) { /* some from end of window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = window - OFF; + if (wnext < len) { /* some from start of window */ + op = wnext; + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + } + else { /* contiguous in window */ + from += wnext - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + while (len > 2) { + PUP(out) = PUP(from); + PUP(out) = PUP(from); + PUP(out) = PUP(from); + len -= 3; + } + if (len) { + PUP(out) = PUP(from); + if (len > 1) + PUP(out) = PUP(from); + } + } + else { + from = out - dist; /* copy direct from output */ + do { /* minimum length is three */ + PUP(out) = PUP(from); + PUP(out) = PUP(from); + PUP(out) = PUP(from); + len -= 3; + } while (len > 2); + if (len) { + PUP(out) = PUP(from); + if (len > 1) + PUP(out) = PUP(from); + } + } + } + else if ((op & 64) == 0) { /* 2nd level distance code */ + here = dcode[here.val + (hold & ((1U << op) - 1))]; + goto dodist; + } + else { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + } + else if ((op & 64) == 0) { /* 2nd level length code */ + here = lcode[here.val + (hold & ((1U << op) - 1))]; + goto dolen; + } + else if (op & 32) { /* end-of-block */ + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + else { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + } while (in < last && out < end); + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + len = bits >> 3; + in -= len; + bits -= len << 3; + hold &= (1U << bits) - 1; + + /* update state and return */ + strm->next_in = in + OFF; + strm->next_out = out + OFF; + strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); + strm->avail_out = (unsigned)(out < end ? + 257 + (end - out) : 257 - (out - end)); + state->hold = hold; + state->bits = bits; + return; +} + +/* + inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): + - Using bit fields for code structure + - Different op definition to avoid & for extra bits (do & for table bits) + - Three separate decoding do-loops for direct, window, and wnext == 0 + - Special case for distance > 1 copies to do overlapped load and store copy + - Explicit branch predictions (based on measured branch probabilities) + - Deferring match copy and interspersed it with decoding subsequent codes + - Swapping literal/length else + - Swapping window/direct else + - Larger unrolled copy loops (three is about right) + - Moving len -= 3 statement into middle of loop + */ + +#endif /* !ASMINF */ diff --git a/src/SDL2/external/zlib-1.2.8/inffast.h b/src/SDL2/external/zlib-1.2.8/inffast.h new file mode 100644 index 000000000..e5c1aa4ca --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/inffast.h @@ -0,0 +1,11 @@ +/* inffast.h -- header to use inffast.c + * Copyright (C) 1995-2003, 2010 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start)); diff --git a/src/SDL2/external/zlib-1.2.8/inffixed.h b/src/SDL2/external/zlib-1.2.8/inffixed.h new file mode 100644 index 000000000..d62832776 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/inffixed.h @@ -0,0 +1,94 @@ + /* inffixed.h -- table for decoding fixed codes + * Generated automatically by makefixed(). + */ + + /* WARNING: this file should *not* be used by applications. + It is part of the implementation of this library and is + subject to change. Applications should only use zlib.h. + */ + + static const code lenfix[512] = { + {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, + {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, + {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, + {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, + {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, + {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, + {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, + {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, + {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, + {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, + {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, + {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, + {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, + {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, + {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, + {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, + {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, + {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, + {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, + {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, + {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, + {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, + {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, + {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, + {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, + {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, + {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, + {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, + {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, + {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, + {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, + {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, + {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, + {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, + {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, + {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, + {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, + {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, + {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, + {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, + {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, + {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, + {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, + {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, + {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, + {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, + {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, + {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, + {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, + {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, + {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, + {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, + {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, + {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, + {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, + {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, + {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, + {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, + {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, + {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, + {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, + {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, + {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, + {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, + {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, + {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, + {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, + {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, + {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, + {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, + {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, + {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, + {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, + {0,9,255} + }; + + static const code distfix[32] = { + {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, + {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, + {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, + {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, + {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, + {22,5,193},{64,5,0} + }; diff --git a/src/SDL2/external/zlib-1.2.8/inflate.c b/src/SDL2/external/zlib-1.2.8/inflate.c new file mode 100644 index 000000000..870f89bb4 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/inflate.c @@ -0,0 +1,1512 @@ +/* inflate.c -- zlib decompression + * Copyright (C) 1995-2012 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * Change history: + * + * 1.2.beta0 24 Nov 2002 + * - First version -- complete rewrite of inflate to simplify code, avoid + * creation of window when not needed, minimize use of window when it is + * needed, make inffast.c even faster, implement gzip decoding, and to + * improve code readability and style over the previous zlib inflate code + * + * 1.2.beta1 25 Nov 2002 + * - Use pointers for available input and output checking in inffast.c + * - Remove input and output counters in inffast.c + * - Change inffast.c entry and loop from avail_in >= 7 to >= 6 + * - Remove unnecessary second byte pull from length extra in inffast.c + * - Unroll direct copy to three copies per loop in inffast.c + * + * 1.2.beta2 4 Dec 2002 + * - Change external routine names to reduce potential conflicts + * - Correct filename to inffixed.h for fixed tables in inflate.c + * - Make hbuf[] unsigned char to match parameter type in inflate.c + * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset) + * to avoid negation problem on Alphas (64 bit) in inflate.c + * + * 1.2.beta3 22 Dec 2002 + * - Add comments on state->bits assertion in inffast.c + * - Add comments on op field in inftrees.h + * - Fix bug in reuse of allocated window after inflateReset() + * - Remove bit fields--back to byte structure for speed + * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths + * - Change post-increments to pre-increments in inflate_fast(), PPC biased? + * - Add compile time option, POSTINC, to use post-increments instead (Intel?) + * - Make MATCH copy in inflate() much faster for when inflate_fast() not used + * - Use local copies of stream next and avail values, as well as local bit + * buffer and bit count in inflate()--for speed when inflate_fast() not used + * + * 1.2.beta4 1 Jan 2003 + * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings + * - Move a comment on output buffer sizes from inffast.c to inflate.c + * - Add comments in inffast.c to introduce the inflate_fast() routine + * - Rearrange window copies in inflate_fast() for speed and simplification + * - Unroll last copy for window match in inflate_fast() + * - Use local copies of window variables in inflate_fast() for speed + * - Pull out common wnext == 0 case for speed in inflate_fast() + * - Make op and len in inflate_fast() unsigned for consistency + * - Add FAR to lcode and dcode declarations in inflate_fast() + * - Simplified bad distance check in inflate_fast() + * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new + * source file infback.c to provide a call-back interface to inflate for + * programs like gzip and unzip -- uses window as output buffer to avoid + * window copying + * + * 1.2.beta5 1 Jan 2003 + * - Improved inflateBack() interface to allow the caller to provide initial + * input in strm. + * - Fixed stored blocks bug in inflateBack() + * + * 1.2.beta6 4 Jan 2003 + * - Added comments in inffast.c on effectiveness of POSTINC + * - Typecasting all around to reduce compiler warnings + * - Changed loops from while (1) or do {} while (1) to for (;;), again to + * make compilers happy + * - Changed type of window in inflateBackInit() to unsigned char * + * + * 1.2.beta7 27 Jan 2003 + * - Changed many types to unsigned or unsigned short to avoid warnings + * - Added inflateCopy() function + * + * 1.2.0 9 Mar 2003 + * - Changed inflateBack() interface to provide separate opaque descriptors + * for the in() and out() functions + * - Changed inflateBack() argument and in_func typedef to swap the length + * and buffer address return values for the input function + * - Check next_in and next_out for Z_NULL on entry to inflate() + * + * The history for versions after 1.2.0 are in ChangeLog in zlib distribution. + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +#ifdef MAKEFIXED +# ifndef BUILDFIXED +# define BUILDFIXED +# endif +#endif + +/* function prototypes */ +local void fixedtables OF((struct inflate_state FAR *state)); +local int updatewindow OF((z_streamp strm, const unsigned char FAR *end, + unsigned copy)); +#ifdef BUILDFIXED + void makefixed OF((void)); +#endif +local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf, + unsigned len)); + +int ZEXPORT inflateResetKeep(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + strm->total_in = strm->total_out = state->total = 0; + strm->msg = Z_NULL; + if (state->wrap) /* to support ill-conceived Java test suite */ + strm->adler = state->wrap & 1; + state->mode = HEAD; + state->last = 0; + state->havedict = 0; + state->dmax = 32768U; + state->head = Z_NULL; + state->hold = 0; + state->bits = 0; + state->lencode = state->distcode = state->next = state->codes; + state->sane = 1; + state->back = -1; + Tracev((stderr, "inflate: reset\n")); + return Z_OK; +} + +int ZEXPORT inflateReset(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + state->wsize = 0; + state->whave = 0; + state->wnext = 0; + return inflateResetKeep(strm); +} + +int ZEXPORT inflateReset2(strm, windowBits) +z_streamp strm; +int windowBits; +{ + int wrap; + struct inflate_state FAR *state; + + /* get the state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* extract wrap request from windowBits parameter */ + if (windowBits < 0) { + wrap = 0; + windowBits = -windowBits; + } + else { + wrap = (windowBits >> 4) + 1; +#ifdef GUNZIP + if (windowBits < 48) + windowBits &= 15; +#endif + } + + /* set number of window bits, free window if different */ + if (windowBits && (windowBits < 8 || windowBits > 15)) + return Z_STREAM_ERROR; + if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) { + ZFREE(strm, state->window); + state->window = Z_NULL; + } + + /* update state and reset the rest of it */ + state->wrap = wrap; + state->wbits = (unsigned)windowBits; + return inflateReset(strm); +} + +int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) +z_streamp strm; +int windowBits; +const char *version; +int stream_size; +{ + int ret; + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL) return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; +#endif + } + if (strm->zfree == (free_func)0) +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zfree = zcfree; +#endif + state = (struct inflate_state FAR *) + ZALLOC(strm, 1, sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (struct internal_state FAR *)state; + state->window = Z_NULL; + ret = inflateReset2(strm, windowBits); + if (ret != Z_OK) { + ZFREE(strm, state); + strm->state = Z_NULL; + } + return ret; +} + +int ZEXPORT inflateInit_(strm, version, stream_size) +z_streamp strm; +const char *version; +int stream_size; +{ + return inflateInit2_(strm, DEF_WBITS, version, stream_size); +} + +int ZEXPORT inflatePrime(strm, bits, value) +z_streamp strm; +int bits; +int value; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (bits < 0) { + state->hold = 0; + state->bits = 0; + return Z_OK; + } + if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR; + value &= (1L << bits) - 1; + state->hold += value << state->bits; + state->bits += bits; + return Z_OK; +} + +/* + Return state with length and distance decoding tables and index sizes set to + fixed code decoding. Normally this returns fixed tables from inffixed.h. + If BUILDFIXED is defined, then instead this routine builds the tables the + first time it's called, and returns those tables the first time and + thereafter. This reduces the size of the code by about 2K bytes, in + exchange for a little execution time. However, BUILDFIXED should not be + used for threaded applications, since the rewriting of the tables and virgin + may not be thread-safe. + */ +local void fixedtables(state) +struct inflate_state FAR *state; +{ +#ifdef BUILDFIXED + static int virgin = 1; + static code *lenfix, *distfix; + static code fixed[544]; + + /* build fixed huffman tables if first call (may not be thread safe) */ + if (virgin) { + unsigned sym, bits; + static code *next; + + /* literal/length table */ + sym = 0; + while (sym < 144) state->lens[sym++] = 8; + while (sym < 256) state->lens[sym++] = 9; + while (sym < 280) state->lens[sym++] = 7; + while (sym < 288) state->lens[sym++] = 8; + next = fixed; + lenfix = next; + bits = 9; + inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); + + /* distance table */ + sym = 0; + while (sym < 32) state->lens[sym++] = 5; + distfix = next; + bits = 5; + inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); + + /* do this just once */ + virgin = 0; + } +#else /* !BUILDFIXED */ +# include "inffixed.h" +#endif /* BUILDFIXED */ + state->lencode = lenfix; + state->lenbits = 9; + state->distcode = distfix; + state->distbits = 5; +} + +#ifdef MAKEFIXED +#include + +/* + Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also + defines BUILDFIXED, so the tables are built on the fly. makefixed() writes + those tables to stdout, which would be piped to inffixed.h. A small program + can simply call makefixed to do this: + + void makefixed(void); + + int main(void) + { + makefixed(); + return 0; + } + + Then that can be linked with zlib built with MAKEFIXED defined and run: + + a.out > inffixed.h + */ +void makefixed() +{ + unsigned low, size; + struct inflate_state state; + + fixedtables(&state); + puts(" /* inffixed.h -- table for decoding fixed codes"); + puts(" * Generated automatically by makefixed()."); + puts(" */"); + puts(""); + puts(" /* WARNING: this file should *not* be used by applications."); + puts(" It is part of the implementation of this library and is"); + puts(" subject to change. Applications should only use zlib.h."); + puts(" */"); + puts(""); + size = 1U << 9; + printf(" static const code lenfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 7) == 0) printf("\n "); + printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op, + state.lencode[low].bits, state.lencode[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); + size = 1U << 5; + printf("\n static const code distfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 6) == 0) printf("\n "); + printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits, + state.distcode[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); +} +#endif /* MAKEFIXED */ + +/* + Update the window with the last wsize (normally 32K) bytes written before + returning. If window does not exist yet, create it. This is only called + when a window is already in use, or when output has been written during this + inflate call, but the end of the deflate stream has not been reached yet. + It is also called to create a window for dictionary data when a dictionary + is loaded. + + Providing output buffers larger than 32K to inflate() should provide a speed + advantage, since only the last 32K of output is copied to the sliding window + upon return from inflate(), and since all distances after the first 32K of + output will fall in the output data, making match copies simpler and faster. + The advantage may be dependent on the size of the processor's data caches. + */ +local int updatewindow(strm, end, copy) +z_streamp strm; +const Bytef *end; +unsigned copy; +{ + struct inflate_state FAR *state; + unsigned dist; + + state = (struct inflate_state FAR *)strm->state; + + /* if it hasn't been done already, allocate space for the window */ + if (state->window == Z_NULL) { + state->window = (unsigned char FAR *) + ZALLOC(strm, 1U << state->wbits, + sizeof(unsigned char)); + if (state->window == Z_NULL) return 1; + } + + /* if window not in use yet, initialize */ + if (state->wsize == 0) { + state->wsize = 1U << state->wbits; + state->wnext = 0; + state->whave = 0; + } + + /* copy state->wsize or less output bytes into the circular window */ + if (copy >= state->wsize) { + zmemcpy(state->window, end - state->wsize, state->wsize); + state->wnext = 0; + state->whave = state->wsize; + } + else { + dist = state->wsize - state->wnext; + if (dist > copy) dist = copy; + zmemcpy(state->window + state->wnext, end - copy, dist); + copy -= dist; + if (copy) { + zmemcpy(state->window, end - copy, copy); + state->wnext = copy; + state->whave = state->wsize; + } + else { + state->wnext += dist; + if (state->wnext == state->wsize) state->wnext = 0; + if (state->whave < state->wsize) state->whave += dist; + } + } + return 0; +} + +/* Macros for inflate(): */ + +/* check function to use adler32() for zlib or crc32() for gzip */ +#ifdef GUNZIP +# define UPDATE(check, buf, len) \ + (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) +#else +# define UPDATE(check, buf, len) adler32(check, buf, len) +#endif + +/* check macros for header crc */ +#ifdef GUNZIP +# define CRC2(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + check = crc32(check, hbuf, 2); \ + } while (0) + +# define CRC4(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + hbuf[2] = (unsigned char)((word) >> 16); \ + hbuf[3] = (unsigned char)((word) >> 24); \ + check = crc32(check, hbuf, 4); \ + } while (0) +#endif + +/* Load registers with state in inflate() for speed */ +#define LOAD() \ + do { \ + put = strm->next_out; \ + left = strm->avail_out; \ + next = strm->next_in; \ + have = strm->avail_in; \ + hold = state->hold; \ + bits = state->bits; \ + } while (0) + +/* Restore state from registers in inflate() */ +#define RESTORE() \ + do { \ + strm->next_out = put; \ + strm->avail_out = left; \ + strm->next_in = next; \ + strm->avail_in = have; \ + state->hold = hold; \ + state->bits = bits; \ + } while (0) + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflate() + if there is no input available. */ +#define PULLBYTE() \ + do { \ + if (have == 0) goto inf_leave; \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflate(). */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n < 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* + inflate() uses a state machine to process as much input data and generate as + much output data as possible before returning. The state machine is + structured roughly as follows: + + for (;;) switch (state) { + ... + case STATEn: + if (not enough input data or output space to make progress) + return; + ... make progress ... + state = STATEm; + break; + ... + } + + so when inflate() is called again, the same case is attempted again, and + if the appropriate resources are provided, the machine proceeds to the + next state. The NEEDBITS() macro is usually the way the state evaluates + whether it can proceed or should return. NEEDBITS() does the return if + the requested bits are not available. The typical use of the BITS macros + is: + + NEEDBITS(n); + ... do something with BITS(n) ... + DROPBITS(n); + + where NEEDBITS(n) either returns from inflate() if there isn't enough + input left to load n bits into the accumulator, or it continues. BITS(n) + gives the low n bits in the accumulator. When done, DROPBITS(n) drops + the low n bits off the accumulator. INITBITS() clears the accumulator + and sets the number of available bits to zero. BYTEBITS() discards just + enough bits to put the accumulator on a byte boundary. After BYTEBITS() + and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. + + NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return + if there is no input available. The decoding of variable length codes uses + PULLBYTE() directly in order to pull just enough bytes to decode the next + code, and no more. + + Some states loop until they get enough input, making sure that enough + state information is maintained to continue the loop where it left off + if NEEDBITS() returns in the loop. For example, want, need, and keep + would all have to actually be part of the saved state in case NEEDBITS() + returns: + + case STATEw: + while (want < need) { + NEEDBITS(n); + keep[want++] = BITS(n); + DROPBITS(n); + } + state = STATEx; + case STATEx: + + As shown above, if the next state is also the next case, then the break + is omitted. + + A state may also return if there is not enough output space available to + complete that state. Those states are copying stored data, writing a + literal byte, and copying a matching string. + + When returning, a "goto inf_leave" is used to update the total counters, + update the check value, and determine whether any progress has been made + during that inflate() call in order to return the proper return code. + Progress is defined as a change in either strm->avail_in or strm->avail_out. + When there is a window, goto inf_leave will update the window with the last + output written. If a goto inf_leave occurs in the middle of decompression + and there is no window currently, goto inf_leave will create one and copy + output to the window for the next call of inflate(). + + In this implementation, the flush parameter of inflate() only affects the + return code (per zlib.h). inflate() always writes as much as possible to + strm->next_out, given the space available and the provided input--the effect + documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers + the allocation of and copying into a sliding window until necessary, which + provides the effect documented in zlib.h for Z_FINISH when the entire input + stream available. So the only thing the flush parameter actually does is: + when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it + will return Z_BUF_ERROR if it has not reached the end of the stream. + */ + +int ZEXPORT inflate(strm, flush) +z_streamp strm; +int flush; +{ + struct inflate_state FAR *state; + z_const unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have, left; /* available input and output */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned in, out; /* save starting available input and output */ + unsigned copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code here; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ +#ifdef GUNZIP + unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ +#endif + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL || + (strm->next_in == Z_NULL && strm->avail_in != 0)) + return Z_STREAM_ERROR; + + state = (struct inflate_state FAR *)strm->state; + if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ + LOAD(); + in = have; + out = left; + ret = Z_OK; + for (;;) + switch (state->mode) { + case HEAD: + if (state->wrap == 0) { + state->mode = TYPEDO; + break; + } + NEEDBITS(16); +#ifdef GUNZIP + if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ + state->check = crc32(0L, Z_NULL, 0); + CRC2(state->check, hold); + INITBITS(); + state->mode = FLAGS; + break; + } + state->flags = 0; /* expect zlib header */ + if (state->head != Z_NULL) + state->head->done = -1; + if (!(state->wrap & 1) || /* check if zlib header allowed */ +#else + if ( +#endif + ((BITS(8) << 8) + (hold >> 8)) % 31) { + strm->msg = (char *)"incorrect header check"; + state->mode = BAD; + break; + } + if (BITS(4) != Z_DEFLATED) { + strm->msg = (char *)"unknown compression method"; + state->mode = BAD; + break; + } + DROPBITS(4); + len = BITS(4) + 8; + if (state->wbits == 0) + state->wbits = len; + else if (len > state->wbits) { + strm->msg = (char *)"invalid window size"; + state->mode = BAD; + break; + } + state->dmax = 1U << len; + Tracev((stderr, "inflate: zlib header ok\n")); + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = hold & 0x200 ? DICTID : TYPE; + INITBITS(); + break; +#ifdef GUNZIP + case FLAGS: + NEEDBITS(16); + state->flags = (int)(hold); + if ((state->flags & 0xff) != Z_DEFLATED) { + strm->msg = (char *)"unknown compression method"; + state->mode = BAD; + break; + } + if (state->flags & 0xe000) { + strm->msg = (char *)"unknown header flags set"; + state->mode = BAD; + break; + } + if (state->head != Z_NULL) + state->head->text = (int)((hold >> 8) & 1); + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = TIME; + case TIME: + NEEDBITS(32); + if (state->head != Z_NULL) + state->head->time = hold; + if (state->flags & 0x0200) CRC4(state->check, hold); + INITBITS(); + state->mode = OS; + case OS: + NEEDBITS(16); + if (state->head != Z_NULL) { + state->head->xflags = (int)(hold & 0xff); + state->head->os = (int)(hold >> 8); + } + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = EXLEN; + case EXLEN: + if (state->flags & 0x0400) { + NEEDBITS(16); + state->length = (unsigned)(hold); + if (state->head != Z_NULL) + state->head->extra_len = (unsigned)hold; + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + } + else if (state->head != Z_NULL) + state->head->extra = Z_NULL; + state->mode = EXTRA; + case EXTRA: + if (state->flags & 0x0400) { + copy = state->length; + if (copy > have) copy = have; + if (copy) { + if (state->head != Z_NULL && + state->head->extra != Z_NULL) { + len = state->head->extra_len - state->length; + zmemcpy(state->head->extra + len, next, + len + copy > state->head->extra_max ? + state->head->extra_max - len : copy); + } + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + state->length -= copy; + } + if (state->length) goto inf_leave; + } + state->length = 0; + state->mode = NAME; + case NAME: + if (state->flags & 0x0800) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->name != Z_NULL && + state->length < state->head->name_max) + state->head->name[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->name = Z_NULL; + state->length = 0; + state->mode = COMMENT; + case COMMENT: + if (state->flags & 0x1000) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->comment != Z_NULL && + state->length < state->head->comm_max) + state->head->comment[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->comment = Z_NULL; + state->mode = HCRC; + case HCRC: + if (state->flags & 0x0200) { + NEEDBITS(16); + if (hold != (state->check & 0xffff)) { + strm->msg = (char *)"header crc mismatch"; + state->mode = BAD; + break; + } + INITBITS(); + } + if (state->head != Z_NULL) { + state->head->hcrc = (int)((state->flags >> 9) & 1); + state->head->done = 1; + } + strm->adler = state->check = crc32(0L, Z_NULL, 0); + state->mode = TYPE; + break; +#endif + case DICTID: + NEEDBITS(32); + strm->adler = state->check = ZSWAP32(hold); + INITBITS(); + state->mode = DICT; + case DICT: + if (state->havedict == 0) { + RESTORE(); + return Z_NEED_DICT; + } + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = TYPE; + case TYPE: + if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave; + case TYPEDO: + if (state->last) { + BYTEBITS(); + state->mode = CHECK; + break; + } + NEEDBITS(3); + state->last = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + state->last ? " (last)" : "")); + state->mode = STORED; + break; + case 1: /* fixed block */ + fixedtables(state); + Tracev((stderr, "inflate: fixed codes block%s\n", + state->last ? " (last)" : "")); + state->mode = LEN_; /* decode codes */ + if (flush == Z_TREES) { + DROPBITS(2); + goto inf_leave; + } + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + state->last ? " (last)" : "")); + state->mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + state->mode = BAD; + } + DROPBITS(2); + break; + case STORED: + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + state->mode = BAD; + break; + } + state->length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %u\n", + state->length)); + INITBITS(); + state->mode = COPY_; + if (flush == Z_TREES) goto inf_leave; + case COPY_: + state->mode = COPY; + case COPY: + copy = state->length; + if (copy) { + if (copy > have) copy = have; + if (copy > left) copy = left; + if (copy == 0) goto inf_leave; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + state->length -= copy; + break; + } + Tracev((stderr, "inflate: stored end\n")); + state->mode = TYPE; + break; + case TABLE: + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); +#ifndef PKZIP_BUG_WORKAROUND + if (state->nlen > 286 || state->ndist > 30) { + strm->msg = (char *)"too many length or distance symbols"; + state->mode = BAD; + break; + } +#endif + Tracev((stderr, "inflate: table sizes ok\n")); + state->have = 0; + state->mode = LENLENS; + case LENLENS: + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + state->lencode = (const code FAR *)(state->next); + state->lenbits = 7; + ret = inflate_table(CODES, state->lens, 19, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + state->have = 0; + state->mode = CODELENS; + case CODELENS: + while (state->have < state->nlen + state->ndist) { + for (;;) { + here = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.val < 16) { + DROPBITS(here.bits); + state->lens[state->have++] = here.val; + } + else { + if (here.val == 16) { + NEEDBITS(here.bits + 2); + DROPBITS(here.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + len = state->lens[state->have - 1]; + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (here.val == 17) { + NEEDBITS(here.bits + 3); + DROPBITS(here.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(here.bits + 7); + DROPBITS(here.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (state->mode == BAD) break; + + /* check for end-of-block code (better have one) */ + if (state->lens[256] == 0) { + strm->msg = (char *)"invalid code -- missing end-of-block"; + state->mode = BAD; + break; + } + + /* build code tables -- note: do not change the lenbits or distbits + values here (9 and 6) without reading the comments in inftrees.h + concerning the ENOUGH constants, which depend on those values */ + state->next = state->codes; + state->lencode = (const code FAR *)(state->next); + state->lenbits = 9; + ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + state->mode = BAD; + break; + } + state->distcode = (const code FAR *)(state->next); + state->distbits = 6; + ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, + &(state->next), &(state->distbits), state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + state->mode = LEN_; + if (flush == Z_TREES) goto inf_leave; + case LEN_: + state->mode = LEN; + case LEN: + if (have >= 6 && left >= 258) { + RESTORE(); + inflate_fast(strm, out); + LOAD(); + if (state->mode == TYPE) + state->back = -1; + break; + } + state->back = 0; + for (;;) { + here = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.op && (here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = state->lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + state->back += last.bits; + } + DROPBITS(here.bits); + state->back += here.bits; + state->length = (unsigned)here.val; + if ((int)(here.op) == 0) { + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); + state->mode = LIT; + break; + } + if (here.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + state->back = -1; + state->mode = TYPE; + break; + } + if (here.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + state->extra = (unsigned)(here.op) & 15; + state->mode = LENEXT; + case LENEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->length += BITS(state->extra); + DROPBITS(state->extra); + state->back += state->extra; + } + Tracevv((stderr, "inflate: length %u\n", state->length)); + state->was = state->length; + state->mode = DIST; + case DIST: + for (;;) { + here = state->distcode[BITS(state->distbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if ((here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = state->distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + state->back += last.bits; + } + DROPBITS(here.bits); + state->back += here.bits; + if (here.op & 64) { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + state->offset = (unsigned)here.val; + state->extra = (unsigned)(here.op) & 15; + state->mode = DISTEXT; + case DISTEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->offset += BITS(state->extra); + DROPBITS(state->extra); + state->back += state->extra; + } +#ifdef INFLATE_STRICT + if (state->offset > state->dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + Tracevv((stderr, "inflate: distance %u\n", state->offset)); + state->mode = MATCH; + case MATCH: + if (left == 0) goto inf_leave; + copy = out - left; + if (state->offset > copy) { /* copy from window */ + copy = state->offset - copy; + if (copy > state->whave) { + if (state->sane) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + Trace((stderr, "inflate.c too far\n")); + copy -= state->whave; + if (copy > state->length) copy = state->length; + if (copy > left) copy = left; + left -= copy; + state->length -= copy; + do { + *put++ = 0; + } while (--copy); + if (state->length == 0) state->mode = LEN; + break; +#endif + } + if (copy > state->wnext) { + copy -= state->wnext; + from = state->window + (state->wsize - copy); + } + else + from = state->window + (state->wnext - copy); + if (copy > state->length) copy = state->length; + } + else { /* copy from output */ + from = put - state->offset; + copy = state->length; + } + if (copy > left) copy = left; + left -= copy; + state->length -= copy; + do { + *put++ = *from++; + } while (--copy); + if (state->length == 0) state->mode = LEN; + break; + case LIT: + if (left == 0) goto inf_leave; + *put++ = (unsigned char)(state->length); + left--; + state->mode = LEN; + break; + case CHECK: + if (state->wrap) { + NEEDBITS(32); + out -= left; + strm->total_out += out; + state->total += out; + if (out) + strm->adler = state->check = + UPDATE(state->check, put - out, out); + out = left; + if (( +#ifdef GUNZIP + state->flags ? hold : +#endif + ZSWAP32(hold)) != state->check) { + strm->msg = (char *)"incorrect data check"; + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: check matches trailer\n")); + } +#ifdef GUNZIP + state->mode = LENGTH; + case LENGTH: + if (state->wrap && state->flags) { + NEEDBITS(32); + if (hold != (state->total & 0xffffffffUL)) { + strm->msg = (char *)"incorrect length check"; + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: length matches trailer\n")); + } +#endif + state->mode = DONE; + case DONE: + ret = Z_STREAM_END; + goto inf_leave; + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + case MEM: + return Z_MEM_ERROR; + case SYNC: + default: + return Z_STREAM_ERROR; + } + + /* + Return from inflate(), updating the total counts and the check value. + If there was no progress during the inflate() call, return a buffer + error. Call updatewindow() to create and/or update the window state. + Note: a memory error from inflate() is non-recoverable. + */ + inf_leave: + RESTORE(); + if (state->wsize || (out != strm->avail_out && state->mode < BAD && + (state->mode < CHECK || flush != Z_FINISH))) + if (updatewindow(strm, strm->next_out, out - strm->avail_out)) { + state->mode = MEM; + return Z_MEM_ERROR; + } + in -= strm->avail_in; + out -= strm->avail_out; + strm->total_in += in; + strm->total_out += out; + state->total += out; + if (state->wrap && out) + strm->adler = state->check = + UPDATE(state->check, strm->next_out - out, out); + strm->data_type = state->bits + (state->last ? 64 : 0) + + (state->mode == TYPE ? 128 : 0) + + (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0); + if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) + ret = Z_BUF_ERROR; + return ret; +} + +int ZEXPORT inflateEnd(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (state->window != Z_NULL) ZFREE(strm, state->window); + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} + +int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength) +z_streamp strm; +Bytef *dictionary; +uInt *dictLength; +{ + struct inflate_state FAR *state; + + /* check state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* copy dictionary */ + if (state->whave && dictionary != Z_NULL) { + zmemcpy(dictionary, state->window + state->wnext, + state->whave - state->wnext); + zmemcpy(dictionary + state->whave - state->wnext, + state->window, state->wnext); + } + if (dictLength != Z_NULL) + *dictLength = state->whave; + return Z_OK; +} + +int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength) +z_streamp strm; +const Bytef *dictionary; +uInt dictLength; +{ + struct inflate_state FAR *state; + unsigned long dictid; + int ret; + + /* check state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (state->wrap != 0 && state->mode != DICT) + return Z_STREAM_ERROR; + + /* check for correct dictionary identifier */ + if (state->mode == DICT) { + dictid = adler32(0L, Z_NULL, 0); + dictid = adler32(dictid, dictionary, dictLength); + if (dictid != state->check) + return Z_DATA_ERROR; + } + + /* copy dictionary to window using updatewindow(), which will amend the + existing dictionary if appropriate */ + ret = updatewindow(strm, dictionary + dictLength, dictLength); + if (ret) { + state->mode = MEM; + return Z_MEM_ERROR; + } + state->havedict = 1; + Tracev((stderr, "inflate: dictionary set\n")); + return Z_OK; +} + +int ZEXPORT inflateGetHeader(strm, head) +z_streamp strm; +gz_headerp head; +{ + struct inflate_state FAR *state; + + /* check state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if ((state->wrap & 2) == 0) return Z_STREAM_ERROR; + + /* save header structure */ + state->head = head; + head->done = 0; + return Z_OK; +} + +/* + Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found + or when out of input. When called, *have is the number of pattern bytes + found in order so far, in 0..3. On return *have is updated to the new + state. If on return *have equals four, then the pattern was found and the + return value is how many bytes were read including the last byte of the + pattern. If *have is less than four, then the pattern has not been found + yet and the return value is len. In the latter case, syncsearch() can be + called again with more data and the *have state. *have is initialized to + zero for the first call. + */ +local unsigned syncsearch(have, buf, len) +unsigned FAR *have; +const unsigned char FAR *buf; +unsigned len; +{ + unsigned got; + unsigned next; + + got = *have; + next = 0; + while (next < len && got < 4) { + if ((int)(buf[next]) == (got < 2 ? 0 : 0xff)) + got++; + else if (buf[next]) + got = 0; + else + got = 4 - got; + next++; + } + *have = got; + return next; +} + +int ZEXPORT inflateSync(strm) +z_streamp strm; +{ + unsigned len; /* number of bytes to look at or looked at */ + unsigned long in, out; /* temporary to save total_in and total_out */ + unsigned char buf[4]; /* to restore bit buffer to byte string */ + struct inflate_state FAR *state; + + /* check parameters */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR; + + /* if first time, start search in bit buffer */ + if (state->mode != SYNC) { + state->mode = SYNC; + state->hold <<= state->bits & 7; + state->bits -= state->bits & 7; + len = 0; + while (state->bits >= 8) { + buf[len++] = (unsigned char)(state->hold); + state->hold >>= 8; + state->bits -= 8; + } + state->have = 0; + syncsearch(&(state->have), buf, len); + } + + /* search available input */ + len = syncsearch(&(state->have), strm->next_in, strm->avail_in); + strm->avail_in -= len; + strm->next_in += len; + strm->total_in += len; + + /* return no joy or set up to restart inflate() on a new block */ + if (state->have != 4) return Z_DATA_ERROR; + in = strm->total_in; out = strm->total_out; + inflateReset(strm); + strm->total_in = in; strm->total_out = out; + state->mode = TYPE; + return Z_OK; +} + +/* + Returns true if inflate is currently at the end of a block generated by + Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP + implementation to provide an additional safety check. PPP uses + Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored + block. When decompressing, PPP checks that at the end of input packet, + inflate is waiting for these length bytes. + */ +int ZEXPORT inflateSyncPoint(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + return state->mode == STORED && state->bits == 0; +} + +int ZEXPORT inflateCopy(dest, source) +z_streamp dest; +z_streamp source; +{ + struct inflate_state FAR *state; + struct inflate_state FAR *copy; + unsigned char FAR *window; + unsigned wsize; + + /* check input */ + if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL || + source->zalloc == (alloc_func)0 || source->zfree == (free_func)0) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)source->state; + + /* allocate space */ + copy = (struct inflate_state FAR *) + ZALLOC(source, 1, sizeof(struct inflate_state)); + if (copy == Z_NULL) return Z_MEM_ERROR; + window = Z_NULL; + if (state->window != Z_NULL) { + window = (unsigned char FAR *) + ZALLOC(source, 1U << state->wbits, sizeof(unsigned char)); + if (window == Z_NULL) { + ZFREE(source, copy); + return Z_MEM_ERROR; + } + } + + /* copy state */ + zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream)); + zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state)); + if (state->lencode >= state->codes && + state->lencode <= state->codes + ENOUGH - 1) { + copy->lencode = copy->codes + (state->lencode - state->codes); + copy->distcode = copy->codes + (state->distcode - state->codes); + } + copy->next = copy->codes + (state->next - state->codes); + if (window != Z_NULL) { + wsize = 1U << state->wbits; + zmemcpy(window, state->window, wsize); + } + copy->window = window; + dest->state = (struct internal_state FAR *)copy; + return Z_OK; +} + +int ZEXPORT inflateUndermine(strm, subvert) +z_streamp strm; +int subvert; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + state->sane = !subvert; +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + return Z_OK; +#else + state->sane = 1; + return Z_DATA_ERROR; +#endif +} + +long ZEXPORT inflateMark(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return -1L << 16; + state = (struct inflate_state FAR *)strm->state; + return ((long)(state->back) << 16) + + (state->mode == COPY ? state->length : + (state->mode == MATCH ? state->was - state->length : 0)); +} diff --git a/src/SDL2/external/zlib-1.2.8/inflate.h b/src/SDL2/external/zlib-1.2.8/inflate.h new file mode 100644 index 000000000..95f4986d4 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/inflate.h @@ -0,0 +1,122 @@ +/* inflate.h -- internal inflate state definition + * Copyright (C) 1995-2009 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* define NO_GZIP when compiling if you want to disable gzip header and + trailer decoding by inflate(). NO_GZIP would be used to avoid linking in + the crc code when it is not needed. For shared libraries, gzip decoding + should be left enabled. */ +#ifndef NO_GZIP +# define GUNZIP +#endif + +/* Possible inflate modes between inflate() calls */ +typedef enum { + HEAD, /* i: waiting for magic header */ + FLAGS, /* i: waiting for method and flags (gzip) */ + TIME, /* i: waiting for modification time (gzip) */ + OS, /* i: waiting for extra flags and operating system (gzip) */ + EXLEN, /* i: waiting for extra length (gzip) */ + EXTRA, /* i: waiting for extra bytes (gzip) */ + NAME, /* i: waiting for end of file name (gzip) */ + COMMENT, /* i: waiting for end of comment (gzip) */ + HCRC, /* i: waiting for header crc (gzip) */ + DICTID, /* i: waiting for dictionary check value */ + DICT, /* waiting for inflateSetDictionary() call */ + TYPE, /* i: waiting for type bits, including last-flag bit */ + TYPEDO, /* i: same, but skip check to exit inflate on new block */ + STORED, /* i: waiting for stored size (length and complement) */ + COPY_, /* i/o: same as COPY below, but only first time in */ + COPY, /* i/o: waiting for input or output to copy stored block */ + TABLE, /* i: waiting for dynamic block table lengths */ + LENLENS, /* i: waiting for code length code lengths */ + CODELENS, /* i: waiting for length/lit and distance code lengths */ + LEN_, /* i: same as LEN below, but only first time in */ + LEN, /* i: waiting for length/lit/eob code */ + LENEXT, /* i: waiting for length extra bits */ + DIST, /* i: waiting for distance code */ + DISTEXT, /* i: waiting for distance extra bits */ + MATCH, /* o: waiting for output space to copy string */ + LIT, /* o: waiting for output space to write literal */ + CHECK, /* i: waiting for 32-bit check value */ + LENGTH, /* i: waiting for 32-bit length (gzip) */ + DONE, /* finished check, done -- remain here until reset */ + BAD, /* got a data error -- remain here until reset */ + MEM, /* got an inflate() memory error -- remain here until reset */ + SYNC /* looking for synchronization bytes to restart inflate() */ +} inflate_mode; + +/* + State transitions between above modes - + + (most modes can go to BAD or MEM on error -- not shown for clarity) + + Process header: + HEAD -> (gzip) or (zlib) or (raw) + (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT -> + HCRC -> TYPE + (zlib) -> DICTID or TYPE + DICTID -> DICT -> TYPE + (raw) -> TYPEDO + Read deflate blocks: + TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK + STORED -> COPY_ -> COPY -> TYPE + TABLE -> LENLENS -> CODELENS -> LEN_ + LEN_ -> LEN + Read deflate codes in fixed or dynamic block: + LEN -> LENEXT or LIT or TYPE + LENEXT -> DIST -> DISTEXT -> MATCH -> LEN + LIT -> LEN + Process trailer: + CHECK -> LENGTH -> DONE + */ + +/* state maintained between inflate() calls. Approximately 10K bytes. */ +struct inflate_state { + inflate_mode mode; /* current inflate mode */ + int last; /* true if processing last block */ + int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ + int havedict; /* true if dictionary provided */ + int flags; /* gzip header method and flags (0 if zlib) */ + unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ + unsigned long check; /* protected copy of check value */ + unsigned long total; /* protected copy of output count */ + gz_headerp head; /* where to save gzip header information */ + /* sliding window */ + unsigned wbits; /* log base 2 of requested window size */ + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned wnext; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + /* bit accumulator */ + unsigned long hold; /* input bit accumulator */ + unsigned bits; /* number of bits in "in" */ + /* for string and stored block copying */ + unsigned length; /* literal or length of data to copy */ + unsigned offset; /* distance back to copy string from */ + /* for table and code decoding */ + unsigned extra; /* extra bits needed */ + /* fixed and dynamic code tables */ + code const FAR *lencode; /* starting table for length/literal codes */ + code const FAR *distcode; /* starting table for distance codes */ + unsigned lenbits; /* index bits for lencode */ + unsigned distbits; /* index bits for distcode */ + /* dynamic table building */ + unsigned ncode; /* number of code length code lengths */ + unsigned nlen; /* number of length code lengths */ + unsigned ndist; /* number of distance code lengths */ + unsigned have; /* number of code lengths in lens[] */ + code FAR *next; /* next available space in codes[] */ + unsigned short lens[320]; /* temporary storage for code lengths */ + unsigned short work[288]; /* work area for code table building */ + code codes[ENOUGH]; /* space for code tables */ + int sane; /* if false, allow invalid distance too far */ + int back; /* bits back of last unprocessed length/lit */ + unsigned was; /* initial length of match */ +}; diff --git a/src/SDL2/external/zlib-1.2.8/inftrees.c b/src/SDL2/external/zlib-1.2.8/inftrees.c new file mode 100644 index 000000000..44d89cf24 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/inftrees.c @@ -0,0 +1,306 @@ +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" + +#define MAXBITS 15 + +const char inflate_copyright[] = + " inflate 1.2.8 Copyright 1995-2013 Mark Adler "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* + Build a set of tables to decode the provided canonical Huffman code. + The code lengths are lens[0..codes-1]. The result starts at *table, + whose indices are 0..2^bits-1. work is a writable array of at least + lens shorts, which is used as a work area. type is the type of code + to be generated, CODES, LENS, or DISTS. On return, zero is success, + -1 is an invalid code, and +1 means that ENOUGH isn't enough. table + on return points to the next available entry's address. bits is the + requested root table index bits, and on return it is the actual root + table index bits. It will differ if the request is greater than the + longest code or if it is less than the shortest code. + */ +int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work) +codetype type; +unsigned short FAR *lens; +unsigned codes; +code FAR * FAR *table; +unsigned FAR *bits; +unsigned short FAR *work; +{ + unsigned len; /* a code's length in bits */ + unsigned sym; /* index of code symbols */ + unsigned min, max; /* minimum and maximum code lengths */ + unsigned root; /* number of index bits for root table */ + unsigned curr; /* number of index bits for current table */ + unsigned drop; /* code bits to drop for sub-table */ + int left; /* number of prefix codes available */ + unsigned used; /* code entries in table used */ + unsigned huff; /* Huffman code */ + unsigned incr; /* for incrementing code, index */ + unsigned fill; /* index for replicating entries */ + unsigned low; /* low bits for current root entry */ + unsigned mask; /* mask for low root bits */ + code here; /* table entry for duplication */ + code FAR *next; /* next available space in table */ + const unsigned short FAR *base; /* base value table to use */ + const unsigned short FAR *extra; /* extra bits table to use */ + int end; /* use base and extra for symbol > end */ + unsigned short count[MAXBITS+1]; /* number of codes of each length */ + unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ + static const unsigned short lbase[31] = { /* Length codes 257..285 base */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + static const unsigned short lext[31] = { /* Length codes 257..285 extra */ + 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, + 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78}; + static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577, 0, 0}; + static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ + 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, + 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, + 28, 28, 29, 29, 64, 64}; + + /* + Process a set of code lengths to create a canonical Huffman code. The + code lengths are lens[0..codes-1]. Each length corresponds to the + symbols 0..codes-1. The Huffman code is generated by first sorting the + symbols by length from short to long, and retaining the symbol order + for codes with equal lengths. Then the code starts with all zero bits + for the first code of the shortest length, and the codes are integer + increments for the same length, and zeros are appended as the length + increases. For the deflate format, these bits are stored backwards + from their more natural integer increment ordering, and so when the + decoding tables are built in the large loop below, the integer codes + are incremented backwards. + + This routine assumes, but does not check, that all of the entries in + lens[] are in the range 0..MAXBITS. The caller must assure this. + 1..MAXBITS is interpreted as that code length. zero means that that + symbol does not occur in this code. + + The codes are sorted by computing a count of codes for each length, + creating from that a table of starting indices for each length in the + sorted table, and then entering the symbols in order in the sorted + table. The sorted table is work[], with that space being provided by + the caller. + + The length counts are used for other purposes as well, i.e. finding + the minimum and maximum length codes, determining if there are any + codes at all, checking for a valid set of lengths, and looking ahead + at length counts to determine sub-table sizes when building the + decoding tables. + */ + + /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ + for (len = 0; len <= MAXBITS; len++) + count[len] = 0; + for (sym = 0; sym < codes; sym++) + count[lens[sym]]++; + + /* bound code lengths, force root to be within code lengths */ + root = *bits; + for (max = MAXBITS; max >= 1; max--) + if (count[max] != 0) break; + if (root > max) root = max; + if (max == 0) { /* no symbols to code at all */ + here.op = (unsigned char)64; /* invalid code marker */ + here.bits = (unsigned char)1; + here.val = (unsigned short)0; + *(*table)++ = here; /* make a table to force an error */ + *(*table)++ = here; + *bits = 1; + return 0; /* no symbols, but wait for decoding to report error */ + } + for (min = 1; min < max; min++) + if (count[min] != 0) break; + if (root < min) root = min; + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; + left -= count[len]; + if (left < 0) return -1; /* over-subscribed */ + } + if (left > 0 && (type == CODES || max != 1)) + return -1; /* incomplete set */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + count[len]; + + /* sort symbols by length, by symbol order within each length */ + for (sym = 0; sym < codes; sym++) + if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; + + /* + Create and fill in decoding tables. In this loop, the table being + filled is at next and has curr index bits. The code being used is huff + with length len. That code is converted to an index by dropping drop + bits off of the bottom. For codes where len is less than drop + curr, + those top drop + curr - len bits are incremented through all values to + fill the table with replicated entries. + + root is the number of index bits for the root table. When len exceeds + root, sub-tables are created pointed to by the root entry with an index + of the low root bits of huff. This is saved in low to check for when a + new sub-table should be started. drop is zero when the root table is + being filled, and drop is root when sub-tables are being filled. + + When a new sub-table is needed, it is necessary to look ahead in the + code lengths to determine what size sub-table is needed. The length + counts are used for this, and so count[] is decremented as codes are + entered in the tables. + + used keeps track of how many table entries have been allocated from the + provided *table space. It is checked for LENS and DIST tables against + the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in + the initial root table size constants. See the comments in inftrees.h + for more information. + + sym increments through all symbols, and the loop terminates when + all codes of length max, i.e. all codes, have been processed. This + routine permits incomplete codes, so another loop after this one fills + in the rest of the decoding tables with invalid code markers. + */ + + /* set up for code type */ + switch (type) { + case CODES: + base = extra = work; /* dummy value--not used */ + end = 19; + break; + case LENS: + base = lbase; + base -= 257; + extra = lext; + extra -= 257; + end = 256; + break; + default: /* DISTS */ + base = dbase; + extra = dext; + end = -1; + } + + /* initialize state for loop */ + huff = 0; /* starting code */ + sym = 0; /* starting code symbol */ + len = min; /* starting code length */ + next = *table; /* current table to fill in */ + curr = root; /* current table index bits */ + drop = 0; /* current bits to drop from code for index */ + low = (unsigned)(-1); /* trigger new sub-table when len > root */ + used = 1U << root; /* use root table entries */ + mask = used - 1; /* mask for comparing low */ + + /* check available table space */ + if ((type == LENS && used > ENOUGH_LENS) || + (type == DISTS && used > ENOUGH_DISTS)) + return 1; + + /* process all codes and make table entries */ + for (;;) { + /* create table entry */ + here.bits = (unsigned char)(len - drop); + if ((int)(work[sym]) < end) { + here.op = (unsigned char)0; + here.val = work[sym]; + } + else if ((int)(work[sym]) > end) { + here.op = (unsigned char)(extra[work[sym]]); + here.val = base[work[sym]]; + } + else { + here.op = (unsigned char)(32 + 64); /* end of block */ + here.val = 0; + } + + /* replicate for those indices with low len bits equal to huff */ + incr = 1U << (len - drop); + fill = 1U << curr; + min = fill; /* save offset to next table */ + do { + fill -= incr; + next[(huff >> drop) + fill] = here; + } while (fill != 0); + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + + /* go to next symbol, update count, len */ + sym++; + if (--(count[len]) == 0) { + if (len == max) break; + len = lens[work[sym]]; + } + + /* create new sub-table if needed */ + if (len > root && (huff & mask) != low) { + /* if first time, transition to sub-tables */ + if (drop == 0) + drop = root; + + /* increment past last table */ + next += min; /* here min is 1 << curr */ + + /* determine length of next table */ + curr = len - drop; + left = (int)(1 << curr); + while (curr + drop < max) { + left -= count[curr + drop]; + if (left <= 0) break; + curr++; + left <<= 1; + } + + /* check for enough space */ + used += 1U << curr; + if ((type == LENS && used > ENOUGH_LENS) || + (type == DISTS && used > ENOUGH_DISTS)) + return 1; + + /* point entry in root table to sub-table */ + low = huff & mask; + (*table)[low].op = (unsigned char)curr; + (*table)[low].bits = (unsigned char)root; + (*table)[low].val = (unsigned short)(next - *table); + } + } + + /* fill in remaining table entry if code is incomplete (guaranteed to have + at most one remaining entry, since if the code is incomplete, the + maximum code length that was allowed to get this far is one bit) */ + if (huff != 0) { + here.op = (unsigned char)64; /* invalid code marker */ + here.bits = (unsigned char)(len - drop); + here.val = (unsigned short)0; + next[huff] = here; + } + + /* set return parameters */ + *table += used; + *bits = root; + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/inftrees.h b/src/SDL2/external/zlib-1.2.8/inftrees.h new file mode 100644 index 000000000..baa53a0b1 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/inftrees.h @@ -0,0 +1,62 @@ +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995-2005, 2010 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Structure for decoding tables. Each entry provides either the + information needed to do the operation requested by the code that + indexed that table entry, or it provides a pointer to another + table that indexes more bits of the code. op indicates whether + the entry is a pointer to another table, a literal, a length or + distance, an end-of-block, or an invalid code. For a table + pointer, the low four bits of op is the number of index bits of + that table. For a length or distance, the low four bits of op + is the number of extra bits to get after the code. bits is + the number of bits in this code or part of the code to drop off + of the bit buffer. val is the actual byte to output in the case + of a literal, the base length or distance, or the offset from + the current table to the next table. Each entry is four bytes. */ +typedef struct { + unsigned char op; /* operation, extra bits, table bits */ + unsigned char bits; /* bits in this part of the code */ + unsigned short val; /* offset in table or code value */ +} code; + +/* op values as set by inflate_table(): + 00000000 - literal + 0000tttt - table link, tttt != 0 is the number of table index bits + 0001eeee - length or distance, eeee is the number of extra bits + 01100000 - end of block + 01000000 - invalid code + */ + +/* Maximum size of the dynamic table. The maximum number of code structures is + 1444, which is the sum of 852 for literal/length codes and 592 for distance + codes. These values were found by exhaustive searches using the program + examples/enough.c found in the zlib distribtution. The arguments to that + program are the number of symbols, the initial root table size, and the + maximum bit length of a code. "enough 286 9 15" for literal/length codes + returns returns 852, and "enough 30 6 15" for distance codes returns 592. + The initial root table size (9 or 6) is found in the fifth argument of the + inflate_table() calls in inflate.c and infback.c. If the root table size is + changed, then these maximum sizes would be need to be recalculated and + updated. */ +#define ENOUGH_LENS 852 +#define ENOUGH_DISTS 592 +#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS) + +/* Type of code to build for inflate_table() */ +typedef enum { + CODES, + LENS, + DISTS +} codetype; + +int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens, + unsigned codes, code FAR * FAR *table, + unsigned FAR *bits, unsigned short FAR *work)); diff --git a/src/SDL2/external/zlib-1.2.8/make-cross-x64.sh b/src/SDL2/external/zlib-1.2.8/make-cross-x64.sh new file mode 100644 index 000000000..dcca2e7c4 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/make-cross-x64.sh @@ -0,0 +1,14 @@ +#!/bin/sh + +TARGET=x86_64-w64-mingw32 +INSTALL_PATH=/usr/local/cross-tools/$TARGET +export PATH=$PATH:/usr/local/cross-tools/bin + +make -f win32/Makefile.gcc \ + SHARED_MODE=1 \ + LDFLAGS=-static-libgcc \ + PREFIX=$TARGET- \ + prefix=$INSTALL_PATH \ + BINARY_PATH=$INSTALL_PATH/bin \ + INCLUDE_PATH=$INSTALL_PATH/include \ + LIBRARY_PATH=$INSTALL_PATH/lib $* diff --git a/src/SDL2/external/zlib-1.2.8/make-cross-x86.sh b/src/SDL2/external/zlib-1.2.8/make-cross-x86.sh new file mode 100644 index 000000000..fb65d4186 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/make-cross-x86.sh @@ -0,0 +1,14 @@ +#!/bin/sh + +TARGET=i686-w64-mingw32 +INSTALL_PATH=/usr/local/cross-tools/$TARGET +export PATH=$PATH:/usr/local/cross-tools/bin + +make -f win32/Makefile.gcc \ + SHARED_MODE=1 \ + LDFLAGS=-static-libgcc \ + PREFIX=$TARGET- \ + prefix=$INSTALL_PATH \ + BINARY_PATH=$INSTALL_PATH/bin \ + INCLUDE_PATH=$INSTALL_PATH/include \ + LIBRARY_PATH=$INSTALL_PATH/lib $* diff --git a/src/SDL2/external/zlib-1.2.8/make_vms.com b/src/SDL2/external/zlib-1.2.8/make_vms.com new file mode 100644 index 000000000..65e9d0cbc --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/make_vms.com @@ -0,0 +1,867 @@ +$! make libz under VMS written by +$! Martin P.J. Zinser +$! +$! In case of problems with the install you might contact me at +$! zinser@zinser.no-ip.info(preferred) or +$! martin.zinser@eurexchange.com (work) +$! +$! Make procedure history for Zlib +$! +$!------------------------------------------------------------------------------ +$! Version history +$! 0.01 20060120 First version to receive a number +$! 0.02 20061008 Adapt to new Makefile.in +$! 0.03 20091224 Add support for large file check +$! 0.04 20100110 Add new gzclose, gzlib, gzread, gzwrite +$! 0.05 20100221 Exchange zlibdefs.h by zconf.h.in +$! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples +$! subdir path, update module search in makefile.in +$! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned +$! shared image creation +$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared +$! image +$! 0.09 20120305 SMS. P1 sets builder ("MMK", "MMS", " " (built-in)). +$! "" -> automatic, preference: MMK, MMS, built-in. +$! +$ on error then goto err_exit +$! +$ true = 1 +$ false = 0 +$ tmpnam = "temp_" + f$getjpi("","pid") +$ tt = tmpnam + ".txt" +$ tc = tmpnam + ".c" +$ th = tmpnam + ".h" +$ define/nolog tconfig 'th' +$ its_decc = false +$ its_vaxc = false +$ its_gnuc = false +$ s_case = False +$! +$! Setup variables holding "config" information +$! +$ Make = "''p1'" +$ name = "Zlib" +$ version = "?.?.?" +$ v_string = "ZLIB_VERSION" +$ v_file = "zlib.h" +$ ccopt = "/include = []" +$ lopts = "" +$ dnsrl = "" +$ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in" +$ conf_check_string = "" +$ linkonly = false +$ optfile = name + ".opt" +$ mapfile = name + ".map" +$ libdefs = "" +$ vax = f$getsyi("HW_MODEL").lt.1024 +$ axp = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096 +$ ia64 = f$getsyi("HW_MODEL").ge.4096 +$! +$! 2012-03-05 SMS. +$! Why is this needed? And if it is needed, why not simply ".not. vax"? +$! +$!!! if axp .or. ia64 then set proc/parse=extended +$! +$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL") +$ mydef = F$parse(whoami,,,"DEVICE") +$ mydir = f$parse(whoami,,,"DIRECTORY") - "][" +$ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type") +$! +$! Check for MMK/MMS +$! +$ if (Make .eqs. "") +$ then +$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS" +$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK" +$ else +$ Make = f$edit( Make, "trim") +$ endif +$! +$ gosub find_version +$! +$ open/write topt tmp.opt +$ open/write optf 'optfile' +$! +$ gosub check_opts +$! +$! Look for the compiler used +$! +$ gosub check_compiler +$ close topt +$ close optf +$! +$ if its_decc +$ then +$ ccopt = "/prefix=all" + ccopt +$ if f$trnlnm("SYS") .eqs. "" +$ then +$ if axp +$ then +$ define sys sys$library: +$ else +$ ccopt = "/decc" + ccopt +$ define sys decc$library_include: +$ endif +$ endif +$! +$! 2012-03-05 SMS. +$! Why /NAMES = AS_IS? Why not simply ".not. vax"? And why not on VAX? +$! +$ if axp .or. ia64 +$ then +$ ccopt = ccopt + "/name=as_is/opt=(inline=speed)" +$ s_case = true +$ endif +$ endif +$ if its_vaxc .or. its_gnuc +$ then +$ if f$trnlnm("SYS").eqs."" then define sys sys$library: +$ endif +$! +$! Build a fake configure input header +$! +$ open/write conf_hin config.hin +$ write conf_hin "#undef _LARGEFILE64_SOURCE" +$ close conf_hin +$! +$! +$ i = 0 +$FIND_ACONF: +$ fname = f$element(i,"#",aconf_in_file) +$ if fname .eqs. "#" then goto AMISS_ERR +$ if f$search(fname) .eqs. "" +$ then +$ i = i + 1 +$ goto find_aconf +$ endif +$ open/read/err=aconf_err aconf_in 'fname' +$ open/write aconf zconf.h +$ACONF_LOOP: +$ read/end_of_file=aconf_exit aconf_in line +$ work = f$edit(line, "compress,trim") +$ if f$extract(0,6,work) .nes. "#undef" +$ then +$ if f$extract(0,12,work) .nes. "#cmakedefine" +$ then +$ write aconf line +$ endif +$ else +$ cdef = f$element(1," ",work) +$ gosub check_config +$ endif +$ goto aconf_loop +$ACONF_EXIT: +$ write aconf "" +$ write aconf "/* VMS specifics added by make_vms.com: */" +$ write aconf "#define VMS 1" +$ write aconf "#include " +$ write aconf "#include " +$ write aconf "#ifdef _LARGEFILE" +$ write aconf "# define off64_t __off64_t" +$ write aconf "# define fopen64 fopen" +$ write aconf "# define fseeko64 fseeko" +$ write aconf "# define lseek64 lseek" +$ write aconf "# define ftello64 ftell" +$ write aconf "#endif" +$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)" +$ write aconf "# define HAVE_VSNPRINTF" +$ write aconf "#endif" +$ close aconf_in +$ close aconf +$ if f$search("''th'") .nes. "" then delete 'th';* +$! Build the thing plain or with mms +$! +$ write sys$output "Compiling Zlib sources ..." +$ if make.eqs."" +$ then +$ if (f$search( "example.obj;*") .nes. "") then delete example.obj;* +$ if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;* +$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" - + adler32.c zlib.h zconf.h +$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" - + compress.c zlib.h zconf.h +$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" - + crc32.c zlib.h zconf.h +$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" - + deflate.c deflate.h zutil.h zlib.h zconf.h +$ CALL MAKE gzclose.OBJ "CC ''CCOPT' gzclose" - + gzclose.c zutil.h zlib.h zconf.h +$ CALL MAKE gzlib.OBJ "CC ''CCOPT' gzlib" - + gzlib.c zutil.h zlib.h zconf.h +$ CALL MAKE gzread.OBJ "CC ''CCOPT' gzread" - + gzread.c zutil.h zlib.h zconf.h +$ CALL MAKE gzwrite.OBJ "CC ''CCOPT' gzwrite" - + gzwrite.c zutil.h zlib.h zconf.h +$ CALL MAKE infback.OBJ "CC ''CCOPT' infback" - + infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h +$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" - + inffast.c zutil.h zlib.h zconf.h inffast.h +$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" - + inflate.c zutil.h zlib.h zconf.h infblock.h +$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" - + inftrees.c zutil.h zlib.h zconf.h inftrees.h +$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" - + trees.c deflate.h zutil.h zlib.h zconf.h +$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" - + uncompr.c zlib.h zconf.h +$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" - + zutil.c zutil.h zlib.h zconf.h +$ write sys$output "Building Zlib ..." +$ CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ +$ write sys$output "Building example..." +$ CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" - + [.test]example.c zlib.h zconf.h +$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb +$ write sys$output "Building minigzip..." +$ CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" - + [.test]minigzip.c zlib.h zconf.h +$ call make minigzip.exe - + "LINK minigzip,libz.olb/lib" - + minigzip.obj libz.olb +$ else +$ gosub crea_mms +$ write sys$output "Make ''name' ''version' with ''Make' " +$ 'make' +$ endif +$! +$! Create shareable image +$! +$ gosub crea_olist +$ write sys$output "Creating libzshr.exe" +$ call map_2_shopt 'mapfile' 'optfile' +$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt +$ write sys$output "Zlib build completed" +$ delete/nolog tmp.opt;* +$ exit +$AMISS_ERR: +$ write sys$output "No source for config.hin found." +$ write sys$output "Tried any of ''aconf_in_file'" +$ goto err_exit +$CC_ERR: +$ write sys$output "C compiler required to build ''name'" +$ goto err_exit +$ERR_EXIT: +$ set message/facil/ident/sever/text +$ close/nolog optf +$ close/nolog topt +$ close/nolog aconf_in +$ close/nolog aconf +$ close/nolog out +$ close/nolog min +$ close/nolog mod +$ close/nolog h_in +$ write sys$output "Exiting..." +$ exit 2 +$! +$! +$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES +$ V = 'F$Verify(0) +$! P1 = What we are trying to make +$! P2 = Command to make it +$! P3 - P8 What it depends on +$ +$ If F$Search(P1) .Eqs. "" Then Goto Makeit +$ Time = F$CvTime(F$File(P1,"RDT")) +$arg=3 +$Loop: +$ Argument = P'arg +$ If Argument .Eqs. "" Then Goto Exit +$ El=0 +$Loop2: +$ File = F$Element(El," ",Argument) +$ If File .Eqs. " " Then Goto Endl +$ AFile = "" +$Loop3: +$ OFile = AFile +$ AFile = F$Search(File) +$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl +$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit +$ Goto Loop3 +$NextEL: +$ El = El + 1 +$ Goto Loop2 +$EndL: +$ arg=arg+1 +$ If arg .Le. 8 Then Goto Loop +$ Goto Exit +$ +$Makeit: +$ VV=F$VERIFY(0) +$ write sys$output P2 +$ 'P2 +$ VV='F$Verify(VV) +$Exit: +$ If V Then Set Verify +$ENDSUBROUTINE +$!------------------------------------------------------------------------------ +$! +$! Check command line options and set symbols accordingly +$! +$!------------------------------------------------------------------------------ +$! Version history +$! 0.01 20041206 First version to receive a number +$! 0.02 20060126 Add new "HELP" target +$ CHECK_OPTS: +$ i = 1 +$ OPT_LOOP: +$ if i .lt. 9 +$ then +$ cparm = f$edit(p'i',"upcase") +$! +$! Check if parameter actually contains something +$! +$ if f$edit(cparm,"trim") .nes. "" +$ then +$ if cparm .eqs. "DEBUG" +$ then +$ ccopt = ccopt + "/noopt/deb" +$ lopts = lopts + "/deb" +$ endif +$ if f$locate("CCOPT=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ ccopt = ccopt + f$extract(start,len,cparm) +$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) - + then s_case = true +$ endif +$ if cparm .eqs. "LINK" then linkonly = true +$ if f$locate("LOPTS=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ lopts = lopts + f$extract(start,len,cparm) +$ endif +$ if f$locate("CC=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ cc_com = f$extract(start,len,cparm) + if (cc_com .nes. "DECC") .and. - + (cc_com .nes. "VAXC") .and. - + (cc_com .nes. "GNUC") +$ then +$ write sys$output "Unsupported compiler choice ''cc_com' ignored" +$ write sys$output "Use DECC, VAXC, or GNUC instead" +$ else +$ if cc_com .eqs. "DECC" then its_decc = true +$ if cc_com .eqs. "VAXC" then its_vaxc = true +$ if cc_com .eqs. "GNUC" then its_gnuc = true +$ endif +$ endif +$ if f$locate("MAKE=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ mmks = f$extract(start,len,cparm) +$ if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS") +$ then +$ make = mmks +$ else +$ write sys$output "Unsupported make choice ''mmks' ignored" +$ write sys$output "Use MMK or MMS instead" +$ endif +$ endif +$ if cparm .eqs. "HELP" then gosub bhelp +$ endif +$ i = i + 1 +$ goto opt_loop +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Look for the compiler used +$! +$! Version history +$! 0.01 20040223 First version to receive a number +$! 0.02 20040229 Save/set value of decc$no_rooted_search_lists +$! 0.03 20060202 Extend handling of GNU C +$! 0.04 20090402 Compaq -> hp +$CHECK_COMPILER: +$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc)) +$ then +$ its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "") +$ its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "") +$ its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "") +$ endif +$! +$! Exit if no compiler available +$! +$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc)) +$ then goto CC_ERR +$ else +$ if its_decc +$ then +$ write sys$output "CC compiler check ... hp C" +$ if f$trnlnm("decc$no_rooted_search_lists") .nes. "" +$ then +$ dnrsl = f$trnlnm("decc$no_rooted_search_lists") +$ endif +$ define/nolog decc$no_rooted_search_lists 1 +$ else +$ if its_vaxc then write sys$output "CC compiler check ... VAX C" +$ if its_gnuc +$ then +$ write sys$output "CC compiler check ... GNU C" +$ if f$trnlnm(topt) then write topt "gnu_cc:[000000]gcclib.olb/lib" +$ if f$trnlnm(optf) then write optf "gnu_cc:[000000]gcclib.olb/lib" +$ cc = "gcc" +$ endif +$ if f$trnlnm(topt) then write topt "sys$share:vaxcrtl.exe/share" +$ if f$trnlnm(optf) then write optf "sys$share:vaxcrtl.exe/share" +$ endif +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! If MMS/MMK are available dump out the descrip.mms if required +$! +$CREA_MMS: +$ write sys$output "Creating descrip.mms..." +$ create descrip.mms +$ open/append out descrip.mms +$ copy sys$input: out +$ deck +# descrip.mms: MMS description file for building zlib on VMS +# written by Martin P.J. Zinser +# + +OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\ + gzread.obj, gzwrite.obj, uncompr.obj, infback.obj\ + deflate.obj, trees.obj, zutil.obj, inflate.obj, \ + inftrees.obj, inffast.obj + +$ eod +$ write out "CFLAGS=", ccopt +$ write out "LOPTS=", lopts +$ write out "all : example.exe minigzip.exe libz.olb" +$ copy sys$input: out +$ deck + @ write sys$output " Example applications available" + +libz.olb : libz.olb($(OBJS)) + @ write sys$output " libz available" + +example.exe : example.obj libz.olb + link $(LOPTS) example,libz.olb/lib + +minigzip.exe : minigzip.obj libz.olb + link $(LOPTS) minigzip,libz.olb/lib + +clean : + delete *.obj;*,libz.olb;*,*.opt;*,*.exe;* + + +# Other dependencies. +adler32.obj : adler32.c zutil.h zlib.h zconf.h +compress.obj : compress.c zlib.h zconf.h +crc32.obj : crc32.c zutil.h zlib.h zconf.h +deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h +example.obj : [.test]example.c zlib.h zconf.h +gzclose.obj : gzclose.c zutil.h zlib.h zconf.h +gzlib.obj : gzlib.c zutil.h zlib.h zconf.h +gzread.obj : gzread.c zutil.h zlib.h zconf.h +gzwrite.obj : gzwrite.c zutil.h zlib.h zconf.h +inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h +inflate.obj : inflate.c zutil.h zlib.h zconf.h +inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h +minigzip.obj : [.test]minigzip.c zlib.h zconf.h +trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h +uncompr.obj : uncompr.c zlib.h zconf.h +zutil.obj : zutil.c zutil.h zlib.h zconf.h +infback.obj : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h +$ eod +$ close out +$ return +$!------------------------------------------------------------------------------ +$! +$! Read list of core library sources from makefile.in and create options +$! needed to build shareable image +$! +$CREA_OLIST: +$ open/read min makefile.in +$ open/write mod modules.opt +$ src_check_list = "OBJZ =#OBJG =" +$MRLOOP: +$ read/end=mrdone min rec +$ i = 0 +$SRC_CHECK_LOOP: +$ src_check = f$element(i, "#", src_check_list) +$ i = i+1 +$ if src_check .eqs. "#" then goto mrloop +$ if (f$extract(0,6,rec) .nes. src_check) then goto src_check_loop +$ rec = rec - src_check +$ gosub extra_filnam +$ if (f$element(1,"\",rec) .eqs. "\") then goto mrloop +$MRSLOOP: +$ read/end=mrdone min rec +$ gosub extra_filnam +$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop +$MRDONE: +$ close min +$ close mod +$ return +$!------------------------------------------------------------------------------ +$! +$! Take record extracted in crea_olist and split it into single filenames +$! +$EXTRA_FILNAM: +$ myrec = f$edit(rec - "\", "trim,compress") +$ i = 0 +$FELOOP: +$ srcfil = f$element(i," ", myrec) +$ if (srcfil .nes. " ") +$ then +$ write mod f$parse(srcfil,,,"NAME"), ".obj" +$ i = i + 1 +$ goto feloop +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Find current Zlib version number +$! +$FIND_VERSION: +$ open/read h_in 'v_file' +$hloop: +$ read/end=hdone h_in rec +$ rec = f$edit(rec,"TRIM") +$ if (f$extract(0,1,rec) .nes. "#") then goto hloop +$ rec = f$edit(rec - "#", "TRIM") +$ if f$element(0," ",rec) .nes. "define" then goto hloop +$ if f$element(1," ",rec) .eqs. v_string +$ then +$ version = 'f$element(2," ",rec)' +$ goto hdone +$ endif +$ goto hloop +$hdone: +$ close h_in +$ return +$!------------------------------------------------------------------------------ +$! +$CHECK_CONFIG: +$! +$ in_ldef = f$locate(cdef,libdefs) +$ if (in_ldef .lt. f$length(libdefs)) +$ then +$ write aconf "#define ''cdef' 1" +$ libdefs = f$extract(0,in_ldef,libdefs) + - + f$extract(in_ldef + f$length(cdef) + 1, - + f$length(libdefs) - in_ldef - f$length(cdef) - 1, - + libdefs) +$ else +$ if (f$type('cdef') .eqs. "INTEGER") +$ then +$ write aconf "#define ''cdef' ", 'cdef' +$ else +$ if (f$type('cdef') .eqs. "STRING") +$ then +$ write aconf "#define ''cdef' ", """", '''cdef'', """" +$ else +$ gosub check_cc_def +$ endif +$ endif +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Check if this is a define relating to the properties of the C/C++ +$! compiler +$! +$ CHECK_CC_DEF: +$ if (cdef .eqs. "_LARGEFILE64_SOURCE") +$ then +$ copy sys$input: 'tc' +$ deck +#include "tconfig" +#define _LARGEFILE +#include + +int main(){ +FILE *fp; + fp = fopen("temp.txt","r"); + fseeko(fp,1,SEEK_SET); + fclose(fp); +} + +$ eod +$ test_inv = false +$ comm_h = false +$ gosub cc_prop_check +$ return +$ endif +$ write aconf "/* ", line, " */" +$ return +$!------------------------------------------------------------------------------ +$! +$! Check for properties of C/C++ compiler +$! +$! Version history +$! 0.01 20031020 First version to receive a number +$! 0.02 20031022 Added logic for defines with value +$! 0.03 20040309 Make sure local config file gets not deleted +$! 0.04 20041230 Also write include for configure run +$! 0.05 20050103 Add processing of "comment defines" +$CC_PROP_CHECK: +$ cc_prop = true +$ is_need = false +$ is_need = (f$extract(0,4,cdef) .eqs. "NEED") .or. (test_inv .eq. true) +$ if f$search(th) .eqs. "" then create 'th' +$ set message/nofac/noident/nosever/notext +$ on error then continue +$ cc 'tmpnam' +$ if .not. ($status) then cc_prop = false +$ on error then continue +$! The headers might lie about the capabilities of the RTL +$ link 'tmpnam',tmp.opt/opt +$ if .not. ($status) then cc_prop = false +$ set message/fac/ident/sever/text +$ on error then goto err_exit +$ delete/nolog 'tmpnam'.*;*/exclude='th' +$ if (cc_prop .and. .not. is_need) .or. - + (.not. cc_prop .and. is_need) +$ then +$ write sys$output "Checking for ''cdef'... yes" +$ if f$type('cdef_val'_yes) .nes. "" +$ then +$ if f$type('cdef_val'_yes) .eqs. "INTEGER" - + then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_yes) +$ if f$type('cdef_val'_yes) .eqs. "STRING" - + then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_yes) +$ else +$ call write_config f$fao("#define !AS 1",cdef) +$ endif +$ if (cdef .eqs. "HAVE_FSEEKO") .or. (cdef .eqs. "_LARGE_FILES") .or. - + (cdef .eqs. "_LARGEFILE64_SOURCE") then - + call write_config f$string("#define _LARGEFILE 1") +$ else +$ write sys$output "Checking for ''cdef'... no" +$ if (comm_h) +$ then + call write_config f$fao("/* !AS */",line) +$ else +$ if f$type('cdef_val'_no) .nes. "" +$ then +$ if f$type('cdef_val'_no) .eqs. "INTEGER" - + then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_no) +$ if f$type('cdef_val'_no) .eqs. "STRING" - + then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_no) +$ else +$ call write_config f$fao("#undef !AS",cdef) +$ endif +$ endif +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Check for properties of C/C++ compiler with multiple result values +$! +$! Version history +$! 0.01 20040127 First version +$! 0.02 20050103 Reconcile changes from cc_prop up to version 0.05 +$CC_MPROP_CHECK: +$ cc_prop = true +$ i = 1 +$ idel = 1 +$ MT_LOOP: +$ if f$type(result_'i') .eqs. "STRING" +$ then +$ set message/nofac/noident/nosever/notext +$ on error then continue +$ cc 'tmpnam'_'i' +$ if .not. ($status) then cc_prop = false +$ on error then continue +$! The headers might lie about the capabilities of the RTL +$ link 'tmpnam'_'i',tmp.opt/opt +$ if .not. ($status) then cc_prop = false +$ set message/fac/ident/sever/text +$ on error then goto err_exit +$ delete/nolog 'tmpnam'_'i'.*;* +$ if (cc_prop) +$ then +$ write sys$output "Checking for ''cdef'... ", mdef_'i' +$ if f$type(mdef_'i') .eqs. "INTEGER" - + then call write_config f$fao("#define !AS !UL",cdef,mdef_'i') +$ if f$type('cdef_val'_yes) .eqs. "STRING" - + then call write_config f$fao("#define !AS !AS",cdef,mdef_'i') +$ goto msym_clean +$ else +$ i = i + 1 +$ goto mt_loop +$ endif +$ endif +$ write sys$output "Checking for ''cdef'... no" +$ call write_config f$fao("#undef !AS",cdef) +$ MSYM_CLEAN: +$ if (idel .le. msym_max) +$ then +$ delete/sym mdef_'idel' +$ idel = idel + 1 +$ goto msym_clean +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Write configuration to both permanent and temporary config file +$! +$! Version history +$! 0.01 20031029 First version to receive a number +$! +$WRITE_CONFIG: SUBROUTINE +$ write aconf 'p1' +$ open/append confh 'th' +$ write confh 'p1' +$ close confh +$ENDSUBROUTINE +$!------------------------------------------------------------------------------ +$! +$! Analyze the project map file and create the symbol vector for a shareable +$! image from it +$! +$! Version history +$! 0.01 20120128 First version +$! 0.02 20120226 Add pre-load logic +$! +$ MAP_2_SHOPT: Subroutine +$! +$ SAY := "WRITE_ SYS$OUTPUT" +$! +$ IF F$SEARCH("''P1'") .EQS. "" +$ THEN +$ SAY "MAP_2_SHOPT-E-NOSUCHFILE: Error, inputfile ''p1' not available" +$ goto exit_m2s +$ ENDIF +$ IF "''P2'" .EQS. "" +$ THEN +$ SAY "MAP_2_SHOPT: Error, no output file provided" +$ goto exit_m2s +$ ENDIF +$! +$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary" +$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread" +$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary" +$ module4 = "inflateSync#uncompress#zlibVersion#compress" +$ open/read map 'p1 +$ if axp .or. ia64 +$ then +$ open/write aopt a.opt +$ open/write bopt b.opt +$ write aopt " CASE_SENSITIVE=YES" +$ write bopt "SYMBOL_VECTOR= (-" +$ mod_sym_num = 1 +$ MOD_SYM_LOOP: +$ if f$type(module'mod_sym_num') .nes. "" +$ then +$ mod_in = 0 +$ MOD_SYM_IN: +$ shared_proc = f$element(mod_in, "#", module'mod_sym_num') +$ if shared_proc .nes. "#" +$ then +$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",- + f$edit(shared_proc,"upcase"),shared_proc) +$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc) +$ mod_in = mod_in + 1 +$ goto mod_sym_in +$ endif +$ mod_sym_num = mod_sym_num + 1 +$ goto mod_sym_loop +$ endif +$MAP_LOOP: +$ read/end=map_end map line +$ if (f$locate("{",line).lt. f$length(line)) .or. - + (f$locate("global:", line) .lt. f$length(line)) +$ then +$ proc = true +$ goto map_loop +$ endif +$ if f$locate("}",line).lt. f$length(line) then proc = false +$ if f$locate("local:", line) .lt. f$length(line) then proc = false +$ if proc +$ then +$ shared_proc = f$edit(line,"collapse") +$ chop_semi = f$locate(";", shared_proc) +$ if chop_semi .lt. f$length(shared_proc) then - + shared_proc = f$extract(0, chop_semi, shared_proc) +$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",- + f$edit(shared_proc,"upcase"),shared_proc) +$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc) +$ endif +$ goto map_loop +$MAP_END: +$ close/nolog aopt +$ close/nolog bopt +$ open/append libopt 'p2' +$ open/read aopt a.opt +$ open/read bopt b.opt +$ALOOP: +$ read/end=aloop_end aopt line +$ write libopt line +$ goto aloop +$ALOOP_END: +$ close/nolog aopt +$ sv = "" +$BLOOP: +$ read/end=bloop_end bopt svn +$ if (svn.nes."") +$ then +$ if (sv.nes."") then write libopt sv +$ sv = svn +$ endif +$ goto bloop +$BLOOP_END: +$ write libopt f$extract(0,f$length(sv)-2,sv), "-" +$ write libopt ")" +$ close/nolog bopt +$ delete/nolog/noconf a.opt;*,b.opt;* +$ else +$ if vax +$ then +$ open/append libopt 'p2' +$ mod_sym_num = 1 +$ VMOD_SYM_LOOP: +$ if f$type(module'mod_sym_num') .nes. "" +$ then +$ mod_in = 0 +$ VMOD_SYM_IN: +$ shared_proc = f$element(mod_in, "#", module'mod_sym_num') +$ if shared_proc .nes. "#" +$ then +$ write libopt f$fao("UNIVERSAL=!AS",- + f$edit(shared_proc,"upcase")) +$ mod_in = mod_in + 1 +$ goto vmod_sym_in +$ endif +$ mod_sym_num = mod_sym_num + 1 +$ goto vmod_sym_loop +$ endif +$VMAP_LOOP: +$ read/end=vmap_end map line +$ if (f$locate("{",line).lt. f$length(line)) .or. - + (f$locate("global:", line) .lt. f$length(line)) +$ then +$ proc = true +$ goto vmap_loop +$ endif +$ if f$locate("}",line).lt. f$length(line) then proc = false +$ if f$locate("local:", line) .lt. f$length(line) then proc = false +$ if proc +$ then +$ shared_proc = f$edit(line,"collapse") +$ chop_semi = f$locate(";", shared_proc) +$ if chop_semi .lt. f$length(shared_proc) then - + shared_proc = f$extract(0, chop_semi, shared_proc) +$ write libopt f$fao("UNIVERSAL=!AS",- + f$edit(shared_proc,"upcase")) +$ endif +$ goto vmap_loop +$VMAP_END: +$ else +$ write sys$output "Unknown Architecture (Not VAX, AXP, or IA64)" +$ write sys$output "No options file created" +$ endif +$ endif +$ EXIT_M2S: +$ close/nolog map +$ close/nolog libopt +$ endsubroutine diff --git a/src/SDL2/external/zlib-1.2.8/msdos/Makefile.bor b/src/SDL2/external/zlib-1.2.8/msdos/Makefile.bor new file mode 100644 index 000000000..3d12a2c25 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/msdos/Makefile.bor @@ -0,0 +1,115 @@ +# Makefile for zlib +# Borland C++ +# Last updated: 15-Mar-2003 + +# To use, do "make -fmakefile.bor" +# To compile in small model, set below: MODEL=s + +# WARNING: the small model is supported but only for small values of +# MAX_WBITS and MAX_MEM_LEVEL. For example: +# -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3 +# If you wish to reduce the memory requirements (default 256K for big +# objects plus a few K), you can add to the LOC macro below: +# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14 +# See zconf.h for details about the memory requirements. + +# ------------ Turbo C++, Borland C++ ------------ + +# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7) +# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added +# to the declaration of LOC here: +LOC = $(LOCAL_ZLIB) + +# type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc. +CPU_TYP = 0 + +# memory model: one of s, m, c, l (small, medium, compact, large) +MODEL=l + +# replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version +CC=bcc +LD=bcc +AR=tlib + +# compiler flags +# replace "-O2" by "-O -G -a -d" for Turbo C++ 1.0 +CFLAGS=-O2 -Z -m$(MODEL) $(LOC) + +LDFLAGS=-m$(MODEL) -f- + + +# variables +ZLIB_LIB = zlib_$(MODEL).lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj +OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + +minigzip.obj: test/minigzip.c zlib.h zconf.h + + +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +clean: + -del *.obj + -del *.lib + -del *.exe + -del zlib_*.bak + -del foo.gz diff --git a/src/SDL2/external/zlib-1.2.8/msdos/Makefile.dj2 b/src/SDL2/external/zlib-1.2.8/msdos/Makefile.dj2 new file mode 100644 index 000000000..29b03954d --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/msdos/Makefile.dj2 @@ -0,0 +1,104 @@ +# Makefile for zlib. Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96. +# Copyright (C) 1995-1998 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type: +# +# make -fmakefile.dj2; make test -fmakefile.dj2 +# +# To install libz.a, zconf.h and zlib.h in the djgpp directories, type: +# +# make install -fmakefile.dj2 +# +# after first defining LIBRARY_PATH and INCLUDE_PATH in djgpp.env as +# in the sample below if the pattern of the DJGPP distribution is to +# be followed. Remember that, while 'es around <=> are ignored in +# makefiles, they are *not* in batch files or in djgpp.env. +# - - - - - +# [make] +# INCLUDE_PATH=%\>;INCLUDE_PATH%%\DJDIR%\include +# LIBRARY_PATH=%\>;LIBRARY_PATH%%\DJDIR%\lib +# BUTT=-m486 +# - - - - - +# Alternately, these variables may be defined below, overriding the values +# in djgpp.env, as +# INCLUDE_PATH=c:\usr\include +# LIBRARY_PATH=c:\usr\lib + +CC=gcc + +#CFLAGS=-MMD -O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-MMD -g -DDEBUG +CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ + -Wstrict-prototypes -Wmissing-prototypes + +# If cp.exe is available, replace "copy /Y" with "cp -fp" . +CP=copy /Y +# If gnu install.exe is available, replace $(CP) with ginstall. +INSTALL=$(CP) +# The default value of RM is "rm -f." If "rm.exe" is found, comment out: +RM=del +LDLIBS=-L. -lz +LD=$(CC) -s -o +LDSHARED=$(CC) + +INCL=zlib.h zconf.h +LIBS=libz.a + +AR=ar rcs + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \ + uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o + +OBJA = +# to use the asm code: make OBJA=match.o + +TEST_OBJS = example.o minigzip.o + +all: example.exe minigzip.exe + +check: test +test: all + ./example + echo hello world | .\minigzip | .\minigzip -d + +%.o : %.c + $(CC) $(CFLAGS) -c $< -o $@ + +libz.a: $(OBJS) $(OBJA) + $(AR) $@ $(OBJS) $(OBJA) + +%.exe : %.o $(LIBS) + $(LD) $@ $< $(LDLIBS) + +# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env . + +.PHONY : uninstall clean + +install: $(INCL) $(LIBS) + -@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH) + -@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH) + $(INSTALL) zlib.h $(INCLUDE_PATH) + $(INSTALL) zconf.h $(INCLUDE_PATH) + $(INSTALL) libz.a $(LIBRARY_PATH) + +uninstall: + $(RM) $(INCLUDE_PATH)\zlib.h + $(RM) $(INCLUDE_PATH)\zconf.h + $(RM) $(LIBRARY_PATH)\libz.a + +clean: + $(RM) *.d + $(RM) *.o + $(RM) *.exe + $(RM) libz.a + $(RM) foo.gz + +DEPS := $(wildcard *.d) +ifneq ($(DEPS),) +include $(DEPS) +endif diff --git a/src/SDL2/external/zlib-1.2.8/msdos/Makefile.emx b/src/SDL2/external/zlib-1.2.8/msdos/Makefile.emx new file mode 100644 index 000000000..9c1b57a58 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/msdos/Makefile.emx @@ -0,0 +1,69 @@ +# Makefile for zlib. Modified for emx 0.9c by Chr. Spieler, 6/17/98. +# Copyright (C) 1995-1998 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type: +# +# make -fmakefile.emx; make test -fmakefile.emx +# + +CC=gcc + +#CFLAGS=-MMD -O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-MMD -g -DDEBUG +CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ + -Wstrict-prototypes -Wmissing-prototypes + +# If cp.exe is available, replace "copy /Y" with "cp -fp" . +CP=copy /Y +# If gnu install.exe is available, replace $(CP) with ginstall. +INSTALL=$(CP) +# The default value of RM is "rm -f." If "rm.exe" is found, comment out: +RM=del +LDLIBS=-L. -lzlib +LD=$(CC) -s -o +LDSHARED=$(CC) + +INCL=zlib.h zconf.h +LIBS=zlib.a + +AR=ar rcs + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \ + uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o + +TEST_OBJS = example.o minigzip.o + +all: example.exe minigzip.exe + +test: all + ./example + echo hello world | .\minigzip | .\minigzip -d + +%.o : %.c + $(CC) $(CFLAGS) -c $< -o $@ + +zlib.a: $(OBJS) + $(AR) $@ $(OBJS) + +%.exe : %.o $(LIBS) + $(LD) $@ $< $(LDLIBS) + + +.PHONY : clean + +clean: + $(RM) *.d + $(RM) *.o + $(RM) *.exe + $(RM) zlib.a + $(RM) foo.gz + +DEPS := $(wildcard *.d) +ifneq ($(DEPS),) +include $(DEPS) +endif diff --git a/src/SDL2/external/zlib-1.2.8/msdos/Makefile.msc b/src/SDL2/external/zlib-1.2.8/msdos/Makefile.msc new file mode 100644 index 000000000..ae8378615 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/msdos/Makefile.msc @@ -0,0 +1,112 @@ +# Makefile for zlib +# Microsoft C 5.1 or later +# Last updated: 19-Mar-2003 + +# To use, do "make makefile.msc" +# To compile in small model, set below: MODEL=S + +# If you wish to reduce the memory requirements (default 256K for big +# objects plus a few K), you can add to the LOC macro below: +# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14 +# See zconf.h for details about the memory requirements. + +# ------------- Microsoft C 5.1 and later ------------- + +# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7) +# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added +# to the declaration of LOC here: +LOC = $(LOCAL_ZLIB) + +# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc. +CPU_TYP = 0 + +# Memory model: one of S, M, C, L (small, medium, compact, large) +MODEL=L + +CC=cl +CFLAGS=-nologo -A$(MODEL) -G$(CPU_TYP) -W3 -Oait -Gs $(LOC) +#-Ox generates bad code with MSC 5.1 +LIB_CFLAGS=-Zl $(CFLAGS) + +LD=link +LDFLAGS=/noi/e/st:0x1500/noe/farcall/packcode +# "/farcall/packcode" are only useful for `large code' memory models +# but should be a "no-op" for small code models. + + +# variables +ZLIB_LIB = zlib_$(MODEL).lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(LIB_CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + $(CC) -c $(CFLAGS) $*.c + +minigzip.obj: test/minigzip.c zlib.h zconf.h + $(CC) -c $(CFLAGS) $*.c + + +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + if exist $(ZLIB_LIB) del $(ZLIB_LIB) + lib $(ZLIB_LIB) $(OBJ1); + lib $(ZLIB_LIB) $(OBJ2); + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj,,,$(ZLIB_LIB); + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj,,,$(ZLIB_LIB); + +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +clean: + -del *.obj + -del *.lib + -del *.exe + -del *.map + -del zlib_*.bak + -del foo.gz diff --git a/src/SDL2/external/zlib-1.2.8/msdos/Makefile.tc b/src/SDL2/external/zlib-1.2.8/msdos/Makefile.tc new file mode 100644 index 000000000..5aec82a9d --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/msdos/Makefile.tc @@ -0,0 +1,100 @@ +# Makefile for zlib +# Turbo C 2.01, Turbo C++ 1.01 +# Last updated: 15-Mar-2003 + +# To use, do "make -fmakefile.tc" +# To compile in small model, set below: MODEL=s + +# WARNING: the small model is supported but only for small values of +# MAX_WBITS and MAX_MEM_LEVEL. For example: +# -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3 +# If you wish to reduce the memory requirements (default 256K for big +# objects plus a few K), you can add to CFLAGS below: +# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14 +# See zconf.h for details about the memory requirements. + +# ------------ Turbo C 2.01, Turbo C++ 1.01 ------------ +MODEL=l +CC=tcc +LD=tcc +AR=tlib +# CFLAGS=-O2 -G -Z -m$(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3 +CFLAGS=-O2 -G -Z -m$(MODEL) +LDFLAGS=-m$(MODEL) -f- + + +# variables +ZLIB_LIB = zlib_$(MODEL).lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj +OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + +minigzip.obj: test/minigzip.c zlib.h zconf.h + + +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +clean: + -del *.obj + -del *.lib + -del *.exe + -del zlib_*.bak + -del foo.gz diff --git a/src/SDL2/external/zlib-1.2.8/nintendods/README b/src/SDL2/external/zlib-1.2.8/nintendods/README new file mode 100644 index 000000000..ba7a37dbe --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/nintendods/README @@ -0,0 +1,5 @@ +This Makefile requires devkitARM (http://www.devkitpro.org/category/devkitarm/) and works inside "contrib/nds". It is based on a devkitARM template. + +Eduardo Costa +January 3, 2009 + diff --git a/src/SDL2/external/zlib-1.2.8/old/Makefile.emx b/src/SDL2/external/zlib-1.2.8/old/Makefile.emx new file mode 100644 index 000000000..4d6ab0efa --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/old/Makefile.emx @@ -0,0 +1,69 @@ +# Makefile for zlib. Modified for emx/rsxnt by Chr. Spieler, 6/16/98. +# Copyright (C) 1995-1998 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type: +# +# make -fmakefile.emx; make test -fmakefile.emx +# + +CC=gcc -Zwin32 + +#CFLAGS=-MMD -O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-MMD -g -DDEBUG +CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ + -Wstrict-prototypes -Wmissing-prototypes + +# If cp.exe is available, replace "copy /Y" with "cp -fp" . +CP=copy /Y +# If gnu install.exe is available, replace $(CP) with ginstall. +INSTALL=$(CP) +# The default value of RM is "rm -f." If "rm.exe" is found, comment out: +RM=del +LDLIBS=-L. -lzlib +LD=$(CC) -s -o +LDSHARED=$(CC) + +INCL=zlib.h zconf.h +LIBS=zlib.a + +AR=ar rcs + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \ + gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o + +TEST_OBJS = example.o minigzip.o + +all: example.exe minigzip.exe + +test: all + ./example + echo hello world | .\minigzip | .\minigzip -d + +%.o : %.c + $(CC) $(CFLAGS) -c $< -o $@ + +zlib.a: $(OBJS) + $(AR) $@ $(OBJS) + +%.exe : %.o $(LIBS) + $(LD) $@ $< $(LDLIBS) + + +.PHONY : clean + +clean: + $(RM) *.d + $(RM) *.o + $(RM) *.exe + $(RM) zlib.a + $(RM) foo.gz + +DEPS := $(wildcard *.d) +ifneq ($(DEPS),) +include $(DEPS) +endif diff --git a/src/SDL2/external/zlib-1.2.8/old/Makefile.riscos b/src/SDL2/external/zlib-1.2.8/old/Makefile.riscos new file mode 100644 index 000000000..57e29d3fb --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/old/Makefile.riscos @@ -0,0 +1,151 @@ +# Project: zlib_1_03 +# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430 +# test works out-of-the-box, installs `somewhere' on demand + +# Toolflags: +CCflags = -c -depend !Depend -IC: -g -throwback -DRISCOS -fah +C++flags = -c -depend !Depend -IC: -throwback +Linkflags = -aif -c++ -o $@ +ObjAsmflags = -throwback -NoCache -depend !Depend +CMHGflags = +LibFileflags = -c -l -o $@ +Squeezeflags = -o $@ + +# change the line below to where _you_ want the library installed. +libdest = lib:zlib + +# Final targets: +@.lib: @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \ + @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \ + @.o.uncompr @.o.zutil + LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \ + @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \ + @.o.trees @.o.uncompr @.o.zutil +test: @.minigzip @.example @.lib + @copy @.lib @.libc A~C~DF~L~N~P~Q~RS~TV + @echo running tests: hang on. + @/@.minigzip -f -9 libc + @/@.minigzip -d libc-gz + @/@.minigzip -f -1 libc + @/@.minigzip -d libc-gz + @/@.minigzip -h -9 libc + @/@.minigzip -d libc-gz + @/@.minigzip -h -1 libc + @/@.minigzip -d libc-gz + @/@.minigzip -9 libc + @/@.minigzip -d libc-gz + @/@.minigzip -1 libc + @/@.minigzip -d libc-gz + @diff @.lib @.libc + @echo that should have reported '@.lib and @.libc identical' if you have diff. + @/@.example @.fred @.fred + @echo that will have given lots of hello!'s. + +@.minigzip: @.o.minigzip @.lib C:o.Stubs + Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs +@.example: @.o.example @.lib C:o.Stubs + Link $(Linkflags) @.o.example @.lib C:o.Stubs + +install: @.lib + cdir $(libdest) + cdir $(libdest).h + @copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV + @copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV + @copy @.lib $(libdest).lib A~C~DF~L~N~P~Q~RS~TV + @echo okay, installed zlib in $(libdest) + +clean:; remove @.minigzip + remove @.example + remove @.libc + -wipe @.o.* F~r~cV + remove @.fred + +# User-editable dependencies: +.c.o: + cc $(ccflags) -o $@ $< + +# Static dependencies: + +# Dynamic dependencies: +o.example: c.example +o.example: h.zlib +o.example: h.zconf +o.minigzip: c.minigzip +o.minigzip: h.zlib +o.minigzip: h.zconf +o.adler32: c.adler32 +o.adler32: h.zlib +o.adler32: h.zconf +o.compress: c.compress +o.compress: h.zlib +o.compress: h.zconf +o.crc32: c.crc32 +o.crc32: h.zlib +o.crc32: h.zconf +o.deflate: c.deflate +o.deflate: h.deflate +o.deflate: h.zutil +o.deflate: h.zlib +o.deflate: h.zconf +o.gzio: c.gzio +o.gzio: h.zutil +o.gzio: h.zlib +o.gzio: h.zconf +o.infblock: c.infblock +o.infblock: h.zutil +o.infblock: h.zlib +o.infblock: h.zconf +o.infblock: h.infblock +o.infblock: h.inftrees +o.infblock: h.infcodes +o.infblock: h.infutil +o.infcodes: c.infcodes +o.infcodes: h.zutil +o.infcodes: h.zlib +o.infcodes: h.zconf +o.infcodes: h.inftrees +o.infcodes: h.infblock +o.infcodes: h.infcodes +o.infcodes: h.infutil +o.infcodes: h.inffast +o.inffast: c.inffast +o.inffast: h.zutil +o.inffast: h.zlib +o.inffast: h.zconf +o.inffast: h.inftrees +o.inffast: h.infblock +o.inffast: h.infcodes +o.inffast: h.infutil +o.inffast: h.inffast +o.inflate: c.inflate +o.inflate: h.zutil +o.inflate: h.zlib +o.inflate: h.zconf +o.inflate: h.infblock +o.inftrees: c.inftrees +o.inftrees: h.zutil +o.inftrees: h.zlib +o.inftrees: h.zconf +o.inftrees: h.inftrees +o.inftrees: h.inffixed +o.infutil: c.infutil +o.infutil: h.zutil +o.infutil: h.zlib +o.infutil: h.zconf +o.infutil: h.infblock +o.infutil: h.inftrees +o.infutil: h.infcodes +o.infutil: h.infutil +o.trees: c.trees +o.trees: h.deflate +o.trees: h.zutil +o.trees: h.zlib +o.trees: h.zconf +o.trees: h.trees +o.uncompr: c.uncompr +o.uncompr: h.zlib +o.uncompr: h.zconf +o.zutil: c.zutil +o.zutil: h.zutil +o.zutil: h.zlib +o.zutil: h.zconf diff --git a/src/SDL2/external/zlib-1.2.8/old/README b/src/SDL2/external/zlib-1.2.8/old/README new file mode 100644 index 000000000..800bf0798 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/old/README @@ -0,0 +1,3 @@ +This directory contains files that have not been updated for zlib 1.2.x + +(Volunteers are encouraged to help clean this up. Thanks.) diff --git a/src/SDL2/external/zlib-1.2.8/old/descrip.mms b/src/SDL2/external/zlib-1.2.8/old/descrip.mms new file mode 100644 index 000000000..7066da5b5 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/old/descrip.mms @@ -0,0 +1,48 @@ +# descrip.mms: MMS description file for building zlib on VMS +# written by Martin P.J. Zinser + +cc_defs = +c_deb = + +.ifdef __DECC__ +pref = /prefix=all +.endif + +OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\ + deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\ + inftrees.obj, infcodes.obj, infutil.obj, inffast.obj + +CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF) + +all : example.exe minigzip.exe + @ write sys$output " Example applications available" +libz.olb : libz.olb($(OBJS)) + @ write sys$output " libz available" + +example.exe : example.obj libz.olb + link example,libz.olb/lib + +minigzip.exe : minigzip.obj libz.olb + link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib + +clean : + delete *.obj;*,libz.olb;* + + +# Other dependencies. +adler32.obj : zutil.h zlib.h zconf.h +compress.obj : zlib.h zconf.h +crc32.obj : zutil.h zlib.h zconf.h +deflate.obj : deflate.h zutil.h zlib.h zconf.h +example.obj : zlib.h zconf.h +gzio.obj : zutil.h zlib.h zconf.h +infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h +infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h +inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h +inflate.obj : zutil.h zlib.h zconf.h infblock.h +inftrees.obj : zutil.h zlib.h zconf.h inftrees.h +infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h +minigzip.obj : zlib.h zconf.h +trees.obj : deflate.h zutil.h zlib.h zconf.h +uncompr.obj : zlib.h zconf.h +zutil.obj : zutil.h zlib.h zconf.h diff --git a/src/SDL2/external/zlib-1.2.8/old/os2/Makefile.os2 b/src/SDL2/external/zlib-1.2.8/old/os2/Makefile.os2 new file mode 100644 index 000000000..a105aaa5b --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/old/os2/Makefile.os2 @@ -0,0 +1,136 @@ +# Makefile for zlib under OS/2 using GCC (PGCC) +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile and test, type: +# cp Makefile.os2 .. +# cd .. +# make -f Makefile.os2 test + +# This makefile will build a static library z.lib, a shared library +# z.dll and a import library zdll.lib. You can use either z.lib or +# zdll.lib by specifying either -lz or -lzdll on gcc's command line + +CC=gcc -Zomf -s + +CFLAGS=-O6 -Wall +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-g -DDEBUG +#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ +# -Wstrict-prototypes -Wmissing-prototypes + +#################### BUG WARNING: ##################### +## infcodes.c hits a bug in pgcc-1.0, so you have to use either +## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem) +## This bug is reportedly fixed in pgcc >1.0, but this was not tested +CFLAGS+=-fno-force-mem + +LDFLAGS=-s -L. -lzdll -Zcrtdll +LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll + +VER=1.1.0 +ZLIB=z.lib +SHAREDLIB=z.dll +SHAREDLIBIMP=zdll.lib +LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP) + +AR=emxomfar cr +IMPLIB=emximp +RANLIB=echo +TAR=tar +SHELL=bash + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \ + zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o + +TEST_OBJS = example.o minigzip.o + +DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \ + algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \ + nt/Makefile.nt nt/zlib.dnt contrib/README.contrib contrib/*.txt \ + contrib/asm386/*.asm contrib/asm386/*.c \ + contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \ + contrib/iostream/*.h contrib/iostream2/*.h contrib/iostream2/*.cpp \ + contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 + +all: example.exe minigzip.exe + +test: all + @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \ + echo hello world | ./minigzip | ./minigzip -d || \ + echo ' *** minigzip test FAILED ***' ; \ + if ./example; then \ + echo ' *** zlib test OK ***'; \ + else \ + echo ' *** zlib test FAILED ***'; \ + fi + +$(ZLIB): $(OBJS) + $(AR) $@ $(OBJS) + -@ ($(RANLIB) $@ || true) >/dev/null 2>&1 + +$(SHAREDLIB): $(OBJS) os2/z.def + $(LDSHARED) -o $@ $^ + +$(SHAREDLIBIMP): os2/z.def + $(IMPLIB) -o $@ $^ + +example.exe: example.o $(LIBS) + $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS) + +minigzip.exe: minigzip.o $(LIBS) + $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS) + +clean: + rm -f *.o *~ example minigzip libz.a libz.so* foo.gz + +distclean: clean + +zip: + mv Makefile Makefile~; cp -p Makefile.in Makefile + rm -f test.c ztest*.c + v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\ + zip -ul9 zlib$$v $(DISTFILES) + mv Makefile~ Makefile + +dist: + mv Makefile Makefile~; cp -p Makefile.in Makefile + rm -f test.c ztest*.c + d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\ + rm -f $$d.tar.gz; \ + if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \ + files=""; \ + for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \ + cd ..; \ + GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \ + if test ! -d $$d; then rm -f $$d; fi + mv Makefile~ Makefile + +tags: + etags *.[ch] + +depend: + makedepend -- $(CFLAGS) -- *.[ch] + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +adler32.o: zlib.h zconf.h +compress.o: zlib.h zconf.h +crc32.o: zlib.h zconf.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +example.o: zlib.h zconf.h +gzio.o: zutil.h zlib.h zconf.h +infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h +infcodes.o: zutil.h zlib.h zconf.h +infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h +inffast.o: infblock.h infcodes.h infutil.h inffast.h +inflate.o: zutil.h zlib.h zconf.h infblock.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h +minigzip.o: zlib.h zconf.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h +uncompr.o: zlib.h zconf.h +zutil.o: zutil.h zlib.h zconf.h diff --git a/src/SDL2/external/zlib-1.2.8/old/os2/zlib.def b/src/SDL2/external/zlib-1.2.8/old/os2/zlib.def new file mode 100644 index 000000000..4c753f1a3 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/old/os2/zlib.def @@ -0,0 +1,51 @@ +; +; Slightly modified version of ../nt/zlib.dnt :-) +; + +LIBRARY Z +DESCRIPTION "Zlib compression library for OS/2" +CODE PRELOAD MOVEABLE DISCARDABLE +DATA PRELOAD MOVEABLE MULTIPLE + +EXPORTS + adler32 + compress + crc32 + deflate + deflateCopy + deflateEnd + deflateInit2_ + deflateInit_ + deflateParams + deflateReset + deflateSetDictionary + gzclose + gzdopen + gzerror + gzflush + gzopen + gzread + gzwrite + inflate + inflateEnd + inflateInit2_ + inflateInit_ + inflateReset + inflateSetDictionary + inflateSync + uncompress + zlibVersion + gzprintf + gzputc + gzgetc + gzseek + gzrewind + gztell + gzeof + gzsetparams + zError + inflateSyncPoint + get_crc_table + compress2 + gzputs + gzgets diff --git a/src/SDL2/external/zlib-1.2.8/old/visual-basic.txt b/src/SDL2/external/zlib-1.2.8/old/visual-basic.txt new file mode 100644 index 000000000..57efe5812 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/old/visual-basic.txt @@ -0,0 +1,160 @@ +See below some functions declarations for Visual Basic. + +Frequently Asked Question: + +Q: Each time I use the compress function I get the -5 error (not enough + room in the output buffer). + +A: Make sure that the length of the compressed buffer is passed by + reference ("as any"), not by value ("as long"). Also check that + before the call of compress this length is equal to the total size of + the compressed buffer and not zero. + + +From: "Jon Caruana" +Subject: Re: How to port zlib declares to vb? +Date: Mon, 28 Oct 1996 18:33:03 -0600 + +Got the answer! (I haven't had time to check this but it's what I got, and +looks correct): + +He has the following routines working: + compress + uncompress + gzopen + gzwrite + gzread + gzclose + +Declares follow: (Quoted from Carlos Rios , in Vb4 form) + +#If Win16 Then 'Use Win16 calls. +Declare Function compress Lib "ZLIB.DLL" (ByVal compr As + String, comprLen As Any, ByVal buf As String, ByVal buflen + As Long) As Integer +Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr + As String, uncomprLen As Any, ByVal compr As String, ByVal + lcompr As Long) As Integer +Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As + String, ByVal mode As String) As Long +Declare Function gzread Lib "ZLIB.DLL" (ByVal file As + Long, ByVal uncompr As String, ByVal uncomprLen As Integer) + As Integer +Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As + Long, ByVal uncompr As String, ByVal uncomprLen As Integer) + As Integer +Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As + Long) As Integer +#Else +Declare Function compress Lib "ZLIB32.DLL" + (ByVal compr As String, comprLen As Any, ByVal buf As + String, ByVal buflen As Long) As Integer +Declare Function uncompress Lib "ZLIB32.DLL" + (ByVal uncompr As String, uncomprLen As Any, ByVal compr As + String, ByVal lcompr As Long) As Long +Declare Function gzopen Lib "ZLIB32.DLL" + (ByVal file As String, ByVal mode As String) As Long +Declare Function gzread Lib "ZLIB32.DLL" + (ByVal file As Long, ByVal uncompr As String, ByVal + uncomprLen As Long) As Long +Declare Function gzwrite Lib "ZLIB32.DLL" + (ByVal file As Long, ByVal uncompr As String, ByVal + uncomprLen As Long) As Long +Declare Function gzclose Lib "ZLIB32.DLL" + (ByVal file As Long) As Long +#End If + +-Jon Caruana +jon-net@usa.net +Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member + + +Here is another example from Michael that he +says conforms to the VB guidelines, and that solves the problem of not +knowing the uncompressed size by storing it at the end of the file: + +'Calling the functions: +'bracket meaning: [optional] {Range of possible values} +'Call subCompressFile( [, , [level of compression {1..9}]]) +'Call subUncompressFile() + +Option Explicit +Private lngpvtPcnSml As Long 'Stores value for 'lngPercentSmaller' +Private Const SUCCESS As Long = 0 +Private Const strFilExt As String = ".cpr" +Private Declare Function lngfncCpr Lib "zlib.dll" Alias "compress2" (ByRef +dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long, +ByVal level As Integer) As Long +Private Declare Function lngfncUcp Lib "zlib.dll" Alias "uncompress" (ByRef +dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long) +As Long + +Public Sub subCompressFile(ByVal strargOriFilPth As String, Optional ByVal +strargCprFilPth As String, Optional ByVal intLvl As Integer = 9) + Dim strCprPth As String + Dim lngOriSiz As Long + Dim lngCprSiz As Long + Dim bytaryOri() As Byte + Dim bytaryCpr() As Byte + lngOriSiz = FileLen(strargOriFilPth) + ReDim bytaryOri(lngOriSiz - 1) + Open strargOriFilPth For Binary Access Read As #1 + Get #1, , bytaryOri() + Close #1 + strCprPth = IIf(strargCprFilPth = "", strargOriFilPth, strargCprFilPth) +'Select file path and name + strCprPth = strCprPth & IIf(Right(strCprPth, Len(strFilExt)) = +strFilExt, "", strFilExt) 'Add file extension if not exists + lngCprSiz = (lngOriSiz * 1.01) + 12 'Compression needs temporary a bit +more space then original file size + ReDim bytaryCpr(lngCprSiz - 1) + If lngfncCpr(bytaryCpr(0), lngCprSiz, bytaryOri(0), lngOriSiz, intLvl) = +SUCCESS Then + lngpvtPcnSml = (1# - (lngCprSiz / lngOriSiz)) * 100 + ReDim Preserve bytaryCpr(lngCprSiz - 1) + Open strCprPth For Binary Access Write As #1 + Put #1, , bytaryCpr() + Put #1, , lngOriSiz 'Add the the original size value to the end +(last 4 bytes) + Close #1 + Else + MsgBox "Compression error" + End If + Erase bytaryCpr + Erase bytaryOri +End Sub + +Public Sub subUncompressFile(ByVal strargFilPth As String) + Dim bytaryCpr() As Byte + Dim bytaryOri() As Byte + Dim lngOriSiz As Long + Dim lngCprSiz As Long + Dim strOriPth As String + lngCprSiz = FileLen(strargFilPth) + ReDim bytaryCpr(lngCprSiz - 1) + Open strargFilPth For Binary Access Read As #1 + Get #1, , bytaryCpr() + Close #1 + 'Read the original file size value: + lngOriSiz = bytaryCpr(lngCprSiz - 1) * (2 ^ 24) _ + + bytaryCpr(lngCprSiz - 2) * (2 ^ 16) _ + + bytaryCpr(lngCprSiz - 3) * (2 ^ 8) _ + + bytaryCpr(lngCprSiz - 4) + ReDim Preserve bytaryCpr(lngCprSiz - 5) 'Cut of the original size value + ReDim bytaryOri(lngOriSiz - 1) + If lngfncUcp(bytaryOri(0), lngOriSiz, bytaryCpr(0), lngCprSiz) = SUCCESS +Then + strOriPth = Left(strargFilPth, Len(strargFilPth) - Len(strFilExt)) + Open strOriPth For Binary Access Write As #1 + Put #1, , bytaryOri() + Close #1 + Else + MsgBox "Uncompression error" + End If + Erase bytaryCpr + Erase bytaryOri +End Sub +Public Property Get lngPercentSmaller() As Long + lngPercentSmaller = lngpvtPcnSml +End Property diff --git a/src/SDL2/external/zlib-1.2.8/qnx/package.qpg b/src/SDL2/external/zlib-1.2.8/qnx/package.qpg new file mode 100644 index 000000000..aebf6e3ac --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/qnx/package.qpg @@ -0,0 +1,141 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Library + + Medium + + 2.0 + + + + zlib + zlib + alain.bonnefoy@icbt.com + Public + public + www.gzip.org/zlib + + + Jean-Loup Gailly,Mark Adler + www.gzip.org/zlib + + zlib@gzip.org + + + A massively spiffy yet delicately unobtrusive compression library. + zlib is designed to be a free, general-purpose, legally unencumbered, lossless data compression library for use on virtually any computer hardware and operating system. + http://www.gzip.org/zlib + + + + + 1.2.8 + Medium + Stable + + + + + + + No License + + + + Software Development/Libraries and Extensions/C Libraries + zlib,compression + qnx6 + qnx6 + None + Developer + + + + + + + + + + + + + + Install + Post + No + Ignore + + No + Optional + + + + + + + + + + + + + InstallOver + zlib + + + + + + + + + + + + + InstallOver + zlib-dev + + + + + + + + + diff --git a/src/SDL2/external/zlib-1.2.8/test/example.c b/src/SDL2/external/zlib-1.2.8/test/example.c new file mode 100644 index 000000000..138a699bd --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/test/example.c @@ -0,0 +1,601 @@ +/* example.c -- usage example of the zlib compression library + * Copyright (C) 1995-2006, 2011 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zlib.h" +#include + +#ifdef STDC +# include +# include +#endif + +#if defined(VMS) || defined(RISCOS) +# define TESTFILE "foo-gz" +#else +# define TESTFILE "foo.gz" +#endif + +#define CHECK_ERR(err, msg) { \ + if (err != Z_OK) { \ + fprintf(stderr, "%s error: %d\n", msg, err); \ + exit(1); \ + } \ +} + +z_const char hello[] = "hello, hello!"; +/* "hello world" would be more standard, but the repeated "hello" + * stresses the compression code better, sorry... + */ + +const char dictionary[] = "hello"; +uLong dictId; /* Adler32 value of the dictionary */ + +void test_deflate OF((Byte *compr, uLong comprLen)); +void test_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_deflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_flush OF((Byte *compr, uLong *comprLen)); +void test_sync OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_dict_deflate OF((Byte *compr, uLong comprLen)); +void test_dict_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +int main OF((int argc, char *argv[])); + + +#ifdef Z_SOLO + +void *myalloc OF((void *, unsigned, unsigned)); +void myfree OF((void *, void *)); + +void *myalloc(q, n, m) + void *q; + unsigned n, m; +{ + q = Z_NULL; + return calloc(n, m); +} + +void myfree(void *q, void *p) +{ + q = Z_NULL; + free(p); +} + +static alloc_func zalloc = myalloc; +static free_func zfree = myfree; + +#else /* !Z_SOLO */ + +static alloc_func zalloc = (alloc_func)0; +static free_func zfree = (free_func)0; + +void test_compress OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_gzio OF((const char *fname, + Byte *uncompr, uLong uncomprLen)); + +/* =========================================================================== + * Test compress() and uncompress() + */ +void test_compress(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + uLong len = (uLong)strlen(hello)+1; + + err = compress(compr, &comprLen, (const Bytef*)hello, len); + CHECK_ERR(err, "compress"); + + strcpy((char*)uncompr, "garbage"); + + err = uncompress(uncompr, &uncomprLen, compr, comprLen); + CHECK_ERR(err, "uncompress"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad uncompress\n"); + exit(1); + } else { + printf("uncompress(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test read/write of .gz files + */ +void test_gzio(fname, uncompr, uncomprLen) + const char *fname; /* compressed file name */ + Byte *uncompr; + uLong uncomprLen; +{ +#ifdef NO_GZCOMPRESS + fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n"); +#else + int err; + int len = (int)strlen(hello)+1; + gzFile file; + z_off_t pos; + + file = gzopen(fname, "wb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + exit(1); + } + gzputc(file, 'h'); + if (gzputs(file, "ello") != 4) { + fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err)); + exit(1); + } + if (gzprintf(file, ", %s!", "hello") != 8) { + fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err)); + exit(1); + } + gzseek(file, 1L, SEEK_CUR); /* add one zero byte */ + gzclose(file); + + file = gzopen(fname, "rb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + exit(1); + } + strcpy((char*)uncompr, "garbage"); + + if (gzread(file, uncompr, (unsigned)uncomprLen) != len) { + fprintf(stderr, "gzread err: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad gzread: %s\n", (char*)uncompr); + exit(1); + } else { + printf("gzread(): %s\n", (char*)uncompr); + } + + pos = gzseek(file, -8L, SEEK_CUR); + if (pos != 6 || gztell(file) != pos) { + fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n", + (long)pos, (long)gztell(file)); + exit(1); + } + + if (gzgetc(file) != ' ') { + fprintf(stderr, "gzgetc error\n"); + exit(1); + } + + if (gzungetc(' ', file) != ' ') { + fprintf(stderr, "gzungetc error\n"); + exit(1); + } + + gzgets(file, (char*)uncompr, (int)uncomprLen); + if (strlen((char*)uncompr) != 7) { /* " hello!" */ + fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello + 6)) { + fprintf(stderr, "bad gzgets after gzseek\n"); + exit(1); + } else { + printf("gzgets() after gzseek: %s\n", (char*)uncompr); + } + + gzclose(file); +#endif +} + +#endif /* Z_SOLO */ + +/* =========================================================================== + * Test deflate() with small buffers + */ +void test_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + uLong len = (uLong)strlen(hello)+1; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.next_out = compr; + + while (c_stream.total_in != len && c_stream.total_out < comprLen) { + c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */ + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + } + /* Finish the stream, still forcing small buffers: */ + for (;;) { + c_stream.avail_out = 1; + err = deflate(&c_stream, Z_FINISH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "deflate"); + } + + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with small buffers + */ +void test_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 0; + d_stream.next_out = uncompr; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) { + d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */ + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate\n"); + exit(1); + } else { + printf("inflate(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test deflate() with large buffers and dynamic change of compression level + */ +void test_large_deflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_SPEED); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + /* At this point, uncompr is still mostly zeroes, so it should compress + * very well: + */ + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + if (c_stream.avail_in != 0) { + fprintf(stderr, "deflate not greedy\n"); + exit(1); + } + + /* Feed in already compressed data and switch to no compression: */ + deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); + c_stream.next_in = compr; + c_stream.avail_in = (uInt)comprLen/2; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + /* Switch back to compressing mode: */ + deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED); + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with large buffers + */ +void test_large_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + for (;;) { + d_stream.next_out = uncompr; /* discard the output */ + d_stream.avail_out = (uInt)uncomprLen; + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "large inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (d_stream.total_out != 2*uncomprLen + comprLen/2) { + fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out); + exit(1); + } else { + printf("large_inflate(): OK\n"); + } +} + +/* =========================================================================== + * Test deflate() with full flush + */ +void test_flush(compr, comprLen) + Byte *compr; + uLong *comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + uInt len = (uInt)strlen(hello)+1; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.next_out = compr; + c_stream.avail_in = 3; + c_stream.avail_out = (uInt)*comprLen; + err = deflate(&c_stream, Z_FULL_FLUSH); + CHECK_ERR(err, "deflate"); + + compr[3]++; /* force an error in first compressed block */ + c_stream.avail_in = len - 3; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + CHECK_ERR(err, "deflate"); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); + + *comprLen = c_stream.total_out; +} + +/* =========================================================================== + * Test inflateSync() + */ +void test_sync(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 2; /* just read the zlib header */ + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + inflate(&d_stream, Z_NO_FLUSH); + CHECK_ERR(err, "inflate"); + + d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */ + err = inflateSync(&d_stream); /* but skip the damaged part */ + CHECK_ERR(err, "inflateSync"); + + err = inflate(&d_stream, Z_FINISH); + if (err != Z_DATA_ERROR) { + fprintf(stderr, "inflate should report DATA_ERROR\n"); + /* Because of incorrect adler32 */ + exit(1); + } + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + printf("after inflateSync(): hel%s\n", (char *)uncompr); +} + +/* =========================================================================== + * Test deflate() with preset dictionary + */ +void test_dict_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + err = deflateSetDictionary(&c_stream, + (const Bytef*)dictionary, (int)sizeof(dictionary)); + CHECK_ERR(err, "deflateSetDictionary"); + + dictId = c_stream.adler; + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.avail_in = (uInt)strlen(hello)+1; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with a preset dictionary + */ +void test_dict_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + for (;;) { + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + if (err == Z_NEED_DICT) { + if (d_stream.adler != dictId) { + fprintf(stderr, "unexpected dictionary"); + exit(1); + } + err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary, + (int)sizeof(dictionary)); + } + CHECK_ERR(err, "inflate with dict"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate with dict\n"); + exit(1); + } else { + printf("inflate with dictionary: %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Usage: example [output.gz [input.gz]] + */ + +int main(argc, argv) + int argc; + char *argv[]; +{ + Byte *compr, *uncompr; + uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */ + uLong uncomprLen = comprLen; + static const char* myVersion = ZLIB_VERSION; + + if (zlibVersion()[0] != myVersion[0]) { + fprintf(stderr, "incompatible zlib version\n"); + exit(1); + + } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) { + fprintf(stderr, "warning: different zlib version\n"); + } + + printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n", + ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags()); + + compr = (Byte*)calloc((uInt)comprLen, 1); + uncompr = (Byte*)calloc((uInt)uncomprLen, 1); + /* compr and uncompr are cleared to avoid reading uninitialized + * data and to ensure that uncompr compresses well. + */ + if (compr == Z_NULL || uncompr == Z_NULL) { + printf("out of memory\n"); + exit(1); + } + +#ifdef Z_SOLO + argc = strlen(argv[0]); +#else + test_compress(compr, comprLen, uncompr, uncomprLen); + + test_gzio((argc > 1 ? argv[1] : TESTFILE), + uncompr, uncomprLen); +#endif + + test_deflate(compr, comprLen); + test_inflate(compr, comprLen, uncompr, uncomprLen); + + test_large_deflate(compr, comprLen, uncompr, uncomprLen); + test_large_inflate(compr, comprLen, uncompr, uncomprLen); + + test_flush(compr, &comprLen); + test_sync(compr, comprLen, uncompr, uncomprLen); + comprLen = uncomprLen; + + test_dict_deflate(compr, comprLen); + test_dict_inflate(compr, comprLen, uncompr, uncomprLen); + + free(compr); + free(uncompr); + + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/test/infcover.c b/src/SDL2/external/zlib-1.2.8/test/infcover.c new file mode 100644 index 000000000..fe3d9203a --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/test/infcover.c @@ -0,0 +1,671 @@ +/* infcover.c -- test zlib's inflate routines with full code coverage + * Copyright (C) 2011 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* to use, do: ./configure --cover && make cover */ + +#include +#include +#include +#include +#include "zlib.h" + +/* get definition of internal structure so we can mess with it (see pull()), + and so we can call inflate_trees() (see cover5()) */ +#define ZLIB_INTERNAL +#include "inftrees.h" +#include "inflate.h" + +#define local static + +/* -- memory tracking routines -- */ + +/* + These memory tracking routines are provided to zlib and track all of zlib's + allocations and deallocations, check for LIFO operations, keep a current + and high water mark of total bytes requested, optionally set a limit on the + total memory that can be allocated, and when done check for memory leaks. + + They are used as follows: + + z_stream strm; + mem_setup(&strm) initializes the memory tracking and sets the + zalloc, zfree, and opaque members of strm to use + memory tracking for all zlib operations on strm + mem_limit(&strm, limit) sets a limit on the total bytes requested -- a + request that exceeds this limit will result in an + allocation failure (returns NULL) -- setting the + limit to zero means no limit, which is the default + after mem_setup() + mem_used(&strm, "msg") prints to stderr "msg" and the total bytes used + mem_high(&strm, "msg") prints to stderr "msg" and the high water mark + mem_done(&strm, "msg") ends memory tracking, releases all allocations + for the tracking as well as leaked zlib blocks, if + any. If there was anything unusual, such as leaked + blocks, non-FIFO frees, or frees of addresses not + allocated, then "msg" and information about the + problem is printed to stderr. If everything is + normal, nothing is printed. mem_done resets the + strm members to Z_NULL to use the default memory + allocation routines on the next zlib initialization + using strm. + */ + +/* these items are strung together in a linked list, one for each allocation */ +struct mem_item { + void *ptr; /* pointer to allocated memory */ + size_t size; /* requested size of allocation */ + struct mem_item *next; /* pointer to next item in list, or NULL */ +}; + +/* this structure is at the root of the linked list, and tracks statistics */ +struct mem_zone { + struct mem_item *first; /* pointer to first item in list, or NULL */ + size_t total, highwater; /* total allocations, and largest total */ + size_t limit; /* memory allocation limit, or 0 if no limit */ + int notlifo, rogue; /* counts of non-LIFO frees and rogue frees */ +}; + +/* memory allocation routine to pass to zlib */ +local void *mem_alloc(void *mem, unsigned count, unsigned size) +{ + void *ptr; + struct mem_item *item; + struct mem_zone *zone = mem; + size_t len = count * (size_t)size; + + /* induced allocation failure */ + if (zone == NULL || (zone->limit && zone->total + len > zone->limit)) + return NULL; + + /* perform allocation using the standard library, fill memory with a + non-zero value to make sure that the code isn't depending on zeros */ + ptr = malloc(len); + if (ptr == NULL) + return NULL; + memset(ptr, 0xa5, len); + + /* create a new item for the list */ + item = malloc(sizeof(struct mem_item)); + if (item == NULL) { + free(ptr); + return NULL; + } + item->ptr = ptr; + item->size = len; + + /* insert item at the beginning of the list */ + item->next = zone->first; + zone->first = item; + + /* update the statistics */ + zone->total += item->size; + if (zone->total > zone->highwater) + zone->highwater = zone->total; + + /* return the allocated memory */ + return ptr; +} + +/* memory free routine to pass to zlib */ +local void mem_free(void *mem, void *ptr) +{ + struct mem_item *item, *next; + struct mem_zone *zone = mem; + + /* if no zone, just do a free */ + if (zone == NULL) { + free(ptr); + return; + } + + /* point next to the item that matches ptr, or NULL if not found -- remove + the item from the linked list if found */ + next = zone->first; + if (next) { + if (next->ptr == ptr) + zone->first = next->next; /* first one is it, remove from list */ + else { + do { /* search the linked list */ + item = next; + next = item->next; + } while (next != NULL && next->ptr != ptr); + if (next) { /* if found, remove from linked list */ + item->next = next->next; + zone->notlifo++; /* not a LIFO free */ + } + + } + } + + /* if found, update the statistics and free the item */ + if (next) { + zone->total -= next->size; + free(next); + } + + /* if not found, update the rogue count */ + else + zone->rogue++; + + /* in any case, do the requested free with the standard library function */ + free(ptr); +} + +/* set up a controlled memory allocation space for monitoring, set the stream + parameters to the controlled routines, with opaque pointing to the space */ +local void mem_setup(z_stream *strm) +{ + struct mem_zone *zone; + + zone = malloc(sizeof(struct mem_zone)); + assert(zone != NULL); + zone->first = NULL; + zone->total = 0; + zone->highwater = 0; + zone->limit = 0; + zone->notlifo = 0; + zone->rogue = 0; + strm->opaque = zone; + strm->zalloc = mem_alloc; + strm->zfree = mem_free; +} + +/* set a limit on the total memory allocation, or 0 to remove the limit */ +local void mem_limit(z_stream *strm, size_t limit) +{ + struct mem_zone *zone = strm->opaque; + + zone->limit = limit; +} + +/* show the current total requested allocations in bytes */ +local void mem_used(z_stream *strm, char *prefix) +{ + struct mem_zone *zone = strm->opaque; + + fprintf(stderr, "%s: %lu allocated\n", prefix, zone->total); +} + +/* show the high water allocation in bytes */ +local void mem_high(z_stream *strm, char *prefix) +{ + struct mem_zone *zone = strm->opaque; + + fprintf(stderr, "%s: %lu high water mark\n", prefix, zone->highwater); +} + +/* release the memory allocation zone -- if there are any surprises, notify */ +local void mem_done(z_stream *strm, char *prefix) +{ + int count = 0; + struct mem_item *item, *next; + struct mem_zone *zone = strm->opaque; + + /* show high water mark */ + mem_high(strm, prefix); + + /* free leftover allocations and item structures, if any */ + item = zone->first; + while (item != NULL) { + free(item->ptr); + next = item->next; + free(item); + item = next; + count++; + } + + /* issue alerts about anything unexpected */ + if (count || zone->total) + fprintf(stderr, "** %s: %lu bytes in %d blocks not freed\n", + prefix, zone->total, count); + if (zone->notlifo) + fprintf(stderr, "** %s: %d frees not LIFO\n", prefix, zone->notlifo); + if (zone->rogue) + fprintf(stderr, "** %s: %d frees not recognized\n", + prefix, zone->rogue); + + /* free the zone and delete from the stream */ + free(zone); + strm->opaque = Z_NULL; + strm->zalloc = Z_NULL; + strm->zfree = Z_NULL; +} + +/* -- inflate test routines -- */ + +/* Decode a hexadecimal string, set *len to length, in[] to the bytes. This + decodes liberally, in that hex digits can be adjacent, in which case two in + a row writes a byte. Or they can delimited by any non-hex character, where + the delimiters are ignored except when a single hex digit is followed by a + delimiter in which case that single digit writes a byte. The returned + data is allocated and must eventually be freed. NULL is returned if out of + memory. If the length is not needed, then len can be NULL. */ +local unsigned char *h2b(const char *hex, unsigned *len) +{ + unsigned char *in; + unsigned next, val; + + in = malloc((strlen(hex) + 1) >> 1); + if (in == NULL) + return NULL; + next = 0; + val = 1; + do { + if (*hex >= '0' && *hex <= '9') + val = (val << 4) + *hex - '0'; + else if (*hex >= 'A' && *hex <= 'F') + val = (val << 4) + *hex - 'A' + 10; + else if (*hex >= 'a' && *hex <= 'f') + val = (val << 4) + *hex - 'a' + 10; + else if (val != 1 && val < 32) /* one digit followed by delimiter */ + val += 240; /* make it look like two digits */ + if (val > 255) { /* have two digits */ + in[next++] = val & 0xff; /* save the decoded byte */ + val = 1; /* start over */ + } + } while (*hex++); /* go through the loop with the terminating null */ + if (len != NULL) + *len = next; + in = reallocf(in, next); + return in; +} + +/* generic inflate() run, where hex is the hexadecimal input data, what is the + text to include in an error message, step is how much input data to feed + inflate() on each call, or zero to feed it all, win is the window bits + parameter to inflateInit2(), len is the size of the output buffer, and err + is the error code expected from the first inflate() call (the second + inflate() call is expected to return Z_STREAM_END). If win is 47, then + header information is collected with inflateGetHeader(). If a zlib stream + is looking for a dictionary, then an empty dictionary is provided. + inflate() is run until all of the input data is consumed. */ +local void inf(char *hex, char *what, unsigned step, int win, unsigned len, + int err) +{ + int ret; + unsigned have; + unsigned char *in, *out; + z_stream strm, copy; + gz_header head; + + mem_setup(&strm); + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, win); + if (ret != Z_OK) { + mem_done(&strm, what); + return; + } + out = malloc(len); assert(out != NULL); + if (win == 47) { + head.extra = out; + head.extra_max = len; + head.name = out; + head.name_max = len; + head.comment = out; + head.comm_max = len; + ret = inflateGetHeader(&strm, &head); assert(ret == Z_OK); + } + in = h2b(hex, &have); assert(in != NULL); + if (step == 0 || step > have) + step = have; + strm.avail_in = step; + have -= step; + strm.next_in = in; + do { + strm.avail_out = len; + strm.next_out = out; + ret = inflate(&strm, Z_NO_FLUSH); assert(err == 9 || ret == err); + if (ret != Z_OK && ret != Z_BUF_ERROR && ret != Z_NEED_DICT) + break; + if (ret == Z_NEED_DICT) { + ret = inflateSetDictionary(&strm, in, 1); + assert(ret == Z_DATA_ERROR); + mem_limit(&strm, 1); + ret = inflateSetDictionary(&strm, out, 0); + assert(ret == Z_MEM_ERROR); + mem_limit(&strm, 0); + ((struct inflate_state *)strm.state)->mode = DICT; + ret = inflateSetDictionary(&strm, out, 0); + assert(ret == Z_OK); + ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_BUF_ERROR); + } + ret = inflateCopy(©, &strm); assert(ret == Z_OK); + ret = inflateEnd(©); assert(ret == Z_OK); + err = 9; /* don't care next time around */ + have += strm.avail_in; + strm.avail_in = step > have ? have : step; + have -= strm.avail_in; + } while (strm.avail_in); + free(in); + free(out); + ret = inflateReset2(&strm, -8); assert(ret == Z_OK); + ret = inflateEnd(&strm); assert(ret == Z_OK); + mem_done(&strm, what); +} + +/* cover all of the lines in inflate.c up to inflate() */ +local void cover_support(void) +{ + int ret; + z_stream strm; + + mem_setup(&strm); + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit(&strm); assert(ret == Z_OK); + mem_used(&strm, "inflate init"); + ret = inflatePrime(&strm, 5, 31); assert(ret == Z_OK); + ret = inflatePrime(&strm, -1, 0); assert(ret == Z_OK); + ret = inflateSetDictionary(&strm, Z_NULL, 0); + assert(ret == Z_STREAM_ERROR); + ret = inflateEnd(&strm); assert(ret == Z_OK); + mem_done(&strm, "prime"); + + inf("63 0", "force window allocation", 0, -15, 1, Z_OK); + inf("63 18 5", "force window replacement", 0, -8, 259, Z_OK); + inf("63 18 68 30 d0 0 0", "force split window update", 4, -8, 259, Z_OK); + inf("3 0", "use fixed blocks", 0, -15, 1, Z_STREAM_END); + inf("", "bad window size", 0, 1, 0, Z_STREAM_ERROR); + + mem_setup(&strm); + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit_(&strm, ZLIB_VERSION - 1, (int)sizeof(z_stream)); + assert(ret == Z_VERSION_ERROR); + mem_done(&strm, "wrong version"); + + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit(&strm); assert(ret == Z_OK); + ret = inflateEnd(&strm); assert(ret == Z_OK); + fputs("inflate built-in memory routines\n", stderr); +} + +/* cover all inflate() header and trailer cases and code after inflate() */ +local void cover_wrap(void) +{ + int ret; + z_stream strm, copy; + unsigned char dict[257]; + + ret = inflate(Z_NULL, 0); assert(ret == Z_STREAM_ERROR); + ret = inflateEnd(Z_NULL); assert(ret == Z_STREAM_ERROR); + ret = inflateCopy(Z_NULL, Z_NULL); assert(ret == Z_STREAM_ERROR); + fputs("inflate bad parameters\n", stderr); + + inf("1f 8b 0 0", "bad gzip method", 0, 31, 0, Z_DATA_ERROR); + inf("1f 8b 8 80", "bad gzip flags", 0, 31, 0, Z_DATA_ERROR); + inf("77 85", "bad zlib method", 0, 15, 0, Z_DATA_ERROR); + inf("8 99", "set window size from header", 0, 0, 0, Z_OK); + inf("78 9c", "bad zlib window size", 0, 8, 0, Z_DATA_ERROR); + inf("78 9c 63 0 0 0 1 0 1", "check adler32", 0, 15, 1, Z_STREAM_END); + inf("1f 8b 8 1e 0 0 0 0 0 0 1 0 0 0 0 0 0", "bad header crc", 0, 47, 1, + Z_DATA_ERROR); + inf("1f 8b 8 2 0 0 0 0 0 0 1d 26 3 0 0 0 0 0 0 0 0 0", "check gzip length", + 0, 47, 0, Z_STREAM_END); + inf("78 90", "bad zlib header check", 0, 47, 0, Z_DATA_ERROR); + inf("8 b8 0 0 0 1", "need dictionary", 0, 8, 0, Z_NEED_DICT); + inf("78 9c 63 0", "compute adler32", 0, 15, 1, Z_OK); + + mem_setup(&strm); + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, -8); + strm.avail_in = 2; + strm.next_in = (void *)"\x63"; + strm.avail_out = 1; + strm.next_out = (void *)&ret; + mem_limit(&strm, 1); + ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_MEM_ERROR); + ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_MEM_ERROR); + mem_limit(&strm, 0); + memset(dict, 0, 257); + ret = inflateSetDictionary(&strm, dict, 257); + assert(ret == Z_OK); + mem_limit(&strm, (sizeof(struct inflate_state) << 1) + 256); + ret = inflatePrime(&strm, 16, 0); assert(ret == Z_OK); + strm.avail_in = 2; + strm.next_in = (void *)"\x80"; + ret = inflateSync(&strm); assert(ret == Z_DATA_ERROR); + ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_STREAM_ERROR); + strm.avail_in = 4; + strm.next_in = (void *)"\0\0\xff\xff"; + ret = inflateSync(&strm); assert(ret == Z_OK); + (void)inflateSyncPoint(&strm); + ret = inflateCopy(©, &strm); assert(ret == Z_MEM_ERROR); + mem_limit(&strm, 0); + ret = inflateUndermine(&strm, 1); assert(ret == Z_DATA_ERROR); + (void)inflateMark(&strm); + ret = inflateEnd(&strm); assert(ret == Z_OK); + mem_done(&strm, "miscellaneous, force memory errors"); +} + +/* input and output functions for inflateBack() */ +local unsigned pull(void *desc, unsigned char **buf) +{ + static unsigned int next = 0; + static unsigned char dat[] = {0x63, 0, 2, 0}; + struct inflate_state *state; + + if (desc == Z_NULL) { + next = 0; + return 0; /* no input (already provided at next_in) */ + } + state = (void *)((z_stream *)desc)->state; + if (state != Z_NULL) + state->mode = SYNC; /* force an otherwise impossible situation */ + return next < sizeof(dat) ? (*buf = dat + next++, 1) : 0; +} + +local int push(void *desc, unsigned char *buf, unsigned len) +{ + buf += len; + return desc != Z_NULL; /* force error if desc not null */ +} + +/* cover inflateBack() up to common deflate data cases and after those */ +local void cover_back(void) +{ + int ret; + z_stream strm; + unsigned char win[32768]; + + ret = inflateBackInit_(Z_NULL, 0, win, 0, 0); + assert(ret == Z_VERSION_ERROR); + ret = inflateBackInit(Z_NULL, 0, win); assert(ret == Z_STREAM_ERROR); + ret = inflateBack(Z_NULL, Z_NULL, Z_NULL, Z_NULL, Z_NULL); + assert(ret == Z_STREAM_ERROR); + ret = inflateBackEnd(Z_NULL); assert(ret == Z_STREAM_ERROR); + fputs("inflateBack bad parameters\n", stderr); + + mem_setup(&strm); + ret = inflateBackInit(&strm, 15, win); assert(ret == Z_OK); + strm.avail_in = 2; + strm.next_in = (void *)"\x03"; + ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL); + assert(ret == Z_STREAM_END); + /* force output error */ + strm.avail_in = 3; + strm.next_in = (void *)"\x63\x00"; + ret = inflateBack(&strm, pull, Z_NULL, push, &strm); + assert(ret == Z_BUF_ERROR); + /* force mode error by mucking with state */ + ret = inflateBack(&strm, pull, &strm, push, Z_NULL); + assert(ret == Z_STREAM_ERROR); + ret = inflateBackEnd(&strm); assert(ret == Z_OK); + mem_done(&strm, "inflateBack bad state"); + + ret = inflateBackInit(&strm, 15, win); assert(ret == Z_OK); + ret = inflateBackEnd(&strm); assert(ret == Z_OK); + fputs("inflateBack built-in memory routines\n", stderr); +} + +/* do a raw inflate of data in hexadecimal with both inflate and inflateBack */ +local int try(char *hex, char *id, int err) +{ + int ret; + unsigned len, size; + unsigned char *in, *out, *win; + char *prefix; + z_stream strm; + + /* convert to hex */ + in = h2b(hex, &len); + assert(in != NULL); + + /* allocate work areas */ + size = len << 3; + out = malloc(size); + assert(out != NULL); + win = malloc(32768); + assert(win != NULL); + prefix = malloc(strlen(id) + 6); + assert(prefix != NULL); + + /* first with inflate */ + strcpy(prefix, id); + strcat(prefix, "-late"); + mem_setup(&strm); + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, err < 0 ? 47 : -15); + assert(ret == Z_OK); + strm.avail_in = len; + strm.next_in = in; + do { + strm.avail_out = size; + strm.next_out = out; + ret = inflate(&strm, Z_TREES); + assert(ret != Z_STREAM_ERROR && ret != Z_MEM_ERROR); + if (ret == Z_DATA_ERROR || ret == Z_NEED_DICT) + break; + } while (strm.avail_in || strm.avail_out == 0); + if (err) { + assert(ret == Z_DATA_ERROR); + assert(strcmp(id, strm.msg) == 0); + } + inflateEnd(&strm); + mem_done(&strm, prefix); + + /* then with inflateBack */ + if (err >= 0) { + strcpy(prefix, id); + strcat(prefix, "-back"); + mem_setup(&strm); + ret = inflateBackInit(&strm, 15, win); + assert(ret == Z_OK); + strm.avail_in = len; + strm.next_in = in; + ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL); + assert(ret != Z_STREAM_ERROR); + if (err) { + assert(ret == Z_DATA_ERROR); + assert(strcmp(id, strm.msg) == 0); + } + inflateBackEnd(&strm); + mem_done(&strm, prefix); + } + + /* clean up */ + free(prefix); + free(win); + free(out); + free(in); + return ret; +} + +/* cover deflate data cases in both inflate() and inflateBack() */ +local void cover_inflate(void) +{ + try("0 0 0 0 0", "invalid stored block lengths", 1); + try("3 0", "fixed", 0); + try("6", "invalid block type", 1); + try("1 1 0 fe ff 0", "stored", 0); + try("fc 0 0", "too many length or distance symbols", 1); + try("4 0 fe ff", "invalid code lengths set", 1); + try("4 0 24 49 0", "invalid bit length repeat", 1); + try("4 0 24 e9 ff ff", "invalid bit length repeat", 1); + try("4 0 24 e9 ff 6d", "invalid code -- missing end-of-block", 1); + try("4 80 49 92 24 49 92 24 71 ff ff 93 11 0", + "invalid literal/lengths set", 1); + try("4 80 49 92 24 49 92 24 f b4 ff ff c3 84", "invalid distances set", 1); + try("4 c0 81 8 0 0 0 0 20 7f eb b 0 0", "invalid literal/length code", 1); + try("2 7e ff ff", "invalid distance code", 1); + try("c c0 81 0 0 0 0 0 90 ff 6b 4 0", "invalid distance too far back", 1); + + /* also trailer mismatch just in inflate() */ + try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 1", "incorrect data check", -1); + try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 1", + "incorrect length check", -1); + try("5 c0 21 d 0 0 0 80 b0 fe 6d 2f 91 6c", "pull 17", 0); + try("5 e0 81 91 24 cb b2 2c 49 e2 f 2e 8b 9a 47 56 9f fb fe ec d2 ff 1f", + "long code", 0); + try("ed c0 1 1 0 0 0 40 20 ff 57 1b 42 2c 4f", "length extra", 0); + try("ed cf c1 b1 2c 47 10 c4 30 fa 6f 35 1d 1 82 59 3d fb be 2e 2a fc f c", + "long distance and extra", 0); + try("ed c0 81 0 0 0 0 80 a0 fd a9 17 a9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 " + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6", "window end", 0); + inf("2 8 20 80 0 3 0", "inflate_fast TYPE return", 0, -15, 258, + Z_STREAM_END); + inf("63 18 5 40 c 0", "window wrap", 3, -8, 300, Z_OK); +} + +/* cover remaining lines in inftrees.c */ +local void cover_trees(void) +{ + int ret; + unsigned bits; + unsigned short lens[16], work[16]; + code *next, table[ENOUGH_DISTS]; + + /* we need to call inflate_table() directly in order to manifest not- + enough errors, since zlib insures that enough is always enough */ + for (bits = 0; bits < 15; bits++) + lens[bits] = (unsigned short)(bits + 1); + lens[15] = 15; + next = table; + bits = 15; + ret = inflate_table(DISTS, lens, 16, &next, &bits, work); + assert(ret == 1); + next = table; + bits = 1; + ret = inflate_table(DISTS, lens, 16, &next, &bits, work); + assert(ret == 1); + fputs("inflate_table not enough errors\n", stderr); +} + +/* cover remaining inffast.c decoding and window copying */ +local void cover_fast(void) +{ + inf("e5 e0 81 ad 6d cb b2 2c c9 01 1e 59 63 ae 7d ee fb 4d fd b5 35 41 68" + " ff 7f 0f 0 0 0", "fast length extra bits", 0, -8, 258, Z_DATA_ERROR); + inf("25 fd 81 b5 6d 59 b6 6a 49 ea af 35 6 34 eb 8c b9 f6 b9 1e ef 67 49" + " 50 fe ff ff 3f 0 0", "fast distance extra bits", 0, -8, 258, + Z_DATA_ERROR); + inf("3 7e 0 0 0 0 0", "fast invalid distance code", 0, -8, 258, + Z_DATA_ERROR); + inf("1b 7 0 0 0 0 0", "fast invalid literal/length code", 0, -8, 258, + Z_DATA_ERROR); + inf("d c7 1 ae eb 38 c 4 41 a0 87 72 de df fb 1f b8 36 b1 38 5d ff ff 0", + "fast 2nd level codes and too far back", 0, -8, 258, Z_DATA_ERROR); + inf("63 18 5 8c 10 8 0 0 0 0", "very common case", 0, -8, 259, Z_OK); + inf("63 60 60 18 c9 0 8 18 18 18 26 c0 28 0 29 0 0 0", + "contiguous and wrap around window", 6, -8, 259, Z_OK); + inf("63 0 3 0 0 0 0 0", "copy direct from output", 0, -8, 259, + Z_STREAM_END); +} + +int main(void) +{ + fprintf(stderr, "%s\n", zlibVersion()); + cover_support(); + cover_wrap(); + cover_back(); + cover_inflate(); + cover_trees(); + cover_fast(); + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/test/minigzip.c b/src/SDL2/external/zlib-1.2.8/test/minigzip.c new file mode 100644 index 000000000..b3025a489 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/test/minigzip.c @@ -0,0 +1,651 @@ +/* minigzip.c -- simulate gzip using the zlib compression library + * Copyright (C) 1995-2006, 2010, 2011 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * minigzip is a minimal implementation of the gzip utility. This is + * only an example of using zlib and isn't meant to replace the + * full-featured gzip. No attempt is made to deal with file systems + * limiting names to 14 or 8+3 characters, etc... Error checking is + * very limited. So use minigzip only for testing; use gzip for the + * real thing. On MSDOS, use only on file names without extension + * or in pipe mode. + */ + +/* @(#) $Id$ */ + +#include "zlib.h" +#include + +#ifdef STDC +# include +# include +#endif + +#ifdef USE_MMAP +# include +# include +# include +#endif + +#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) +# include +# include +# ifdef UNDER_CE +# include +# endif +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +#ifdef _MSC_VER +# define snprintf _snprintf +#endif + +#ifdef VMS +# define unlink delete +# define GZ_SUFFIX "-gz" +#endif +#ifdef RISCOS +# define unlink remove +# define GZ_SUFFIX "-gz" +# define fileno(file) file->__file +#endif +#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include /* for fileno */ +#endif + +#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE) +#ifndef WIN32 /* unlink already in stdio.h for WIN32 */ + extern int unlink OF((const char *)); +#endif +#endif + +#if defined(UNDER_CE) +# include +# define perror(s) pwinerror(s) + +/* Map the Windows error number in ERROR to a locale-dependent error + message string and return a pointer to it. Typically, the values + for ERROR come from GetLastError. + + The string pointed to shall not be modified by the application, + but may be overwritten by a subsequent call to strwinerror + + The strwinerror function does not change the current setting + of GetLastError. */ + +static char *strwinerror (error) + DWORD error; +{ + static char buf[1024]; + + wchar_t *msgbuf; + DWORD lasterr = GetLastError(); + DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM + | FORMAT_MESSAGE_ALLOCATE_BUFFER, + NULL, + error, + 0, /* Default language */ + (LPVOID)&msgbuf, + 0, + NULL); + if (chars != 0) { + /* If there is an \r\n appended, zap it. */ + if (chars >= 2 + && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') { + chars -= 2; + msgbuf[chars] = 0; + } + + if (chars > sizeof (buf) - 1) { + chars = sizeof (buf) - 1; + msgbuf[chars] = 0; + } + + wcstombs(buf, msgbuf, chars + 1); + LocalFree(msgbuf); + } + else { + sprintf(buf, "unknown win32 error (%ld)", error); + } + + SetLastError(lasterr); + return buf; +} + +static void pwinerror (s) + const char *s; +{ + if (s && *s) + fprintf(stderr, "%s: %s\n", s, strwinerror(GetLastError ())); + else + fprintf(stderr, "%s\n", strwinerror(GetLastError ())); +} + +#endif /* UNDER_CE */ + +#ifndef GZ_SUFFIX +# define GZ_SUFFIX ".gz" +#endif +#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1) + +#define BUFLEN 16384 +#define MAX_NAME_LEN 1024 + +#ifdef MAXSEG_64K +# define local static + /* Needed for systems with limitation on stack size. */ +#else +# define local +#endif + +#ifdef Z_SOLO +/* for Z_SOLO, create simplified gz* functions using deflate and inflate */ + +#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE) +# include /* for unlink() */ +#endif + +void *myalloc OF((void *, unsigned, unsigned)); +void myfree OF((void *, void *)); + +void *myalloc(q, n, m) + void *q; + unsigned n, m; +{ + q = Z_NULL; + return calloc(n, m); +} + +void myfree(q, p) + void *q, *p; +{ + q = Z_NULL; + free(p); +} + +typedef struct gzFile_s { + FILE *file; + int write; + int err; + char *msg; + z_stream strm; +} *gzFile; + +gzFile gzopen OF((const char *, const char *)); +gzFile gzdopen OF((int, const char *)); +gzFile gz_open OF((const char *, int, const char *)); + +gzFile gzopen(path, mode) +const char *path; +const char *mode; +{ + return gz_open(path, -1, mode); +} + +gzFile gzdopen(fd, mode) +int fd; +const char *mode; +{ + return gz_open(NULL, fd, mode); +} + +gzFile gz_open(path, fd, mode) + const char *path; + int fd; + const char *mode; +{ + gzFile gz; + int ret; + + gz = malloc(sizeof(struct gzFile_s)); + if (gz == NULL) + return NULL; + gz->write = strchr(mode, 'w') != NULL; + gz->strm.zalloc = myalloc; + gz->strm.zfree = myfree; + gz->strm.opaque = Z_NULL; + if (gz->write) + ret = deflateInit2(&(gz->strm), -1, 8, 15 + 16, 8, 0); + else { + gz->strm.next_in = 0; + gz->strm.avail_in = Z_NULL; + ret = inflateInit2(&(gz->strm), 15 + 16); + } + if (ret != Z_OK) { + free(gz); + return NULL; + } + gz->file = path == NULL ? fdopen(fd, gz->write ? "wb" : "rb") : + fopen(path, gz->write ? "wb" : "rb"); + if (gz->file == NULL) { + gz->write ? deflateEnd(&(gz->strm)) : inflateEnd(&(gz->strm)); + free(gz); + return NULL; + } + gz->err = 0; + gz->msg = ""; + return gz; +} + +int gzwrite OF((gzFile, const void *, unsigned)); + +int gzwrite(gz, buf, len) + gzFile gz; + const void *buf; + unsigned len; +{ + z_stream *strm; + unsigned char out[BUFLEN]; + + if (gz == NULL || !gz->write) + return 0; + strm = &(gz->strm); + strm->next_in = (void *)buf; + strm->avail_in = len; + do { + strm->next_out = out; + strm->avail_out = BUFLEN; + (void)deflate(strm, Z_NO_FLUSH); + fwrite(out, 1, BUFLEN - strm->avail_out, gz->file); + } while (strm->avail_out == 0); + return len; +} + +int gzread OF((gzFile, void *, unsigned)); + +int gzread(gz, buf, len) + gzFile gz; + void *buf; + unsigned len; +{ + int ret; + unsigned got; + unsigned char in[1]; + z_stream *strm; + + if (gz == NULL || gz->write) + return 0; + if (gz->err) + return 0; + strm = &(gz->strm); + strm->next_out = (void *)buf; + strm->avail_out = len; + do { + got = fread(in, 1, 1, gz->file); + if (got == 0) + break; + strm->next_in = in; + strm->avail_in = 1; + ret = inflate(strm, Z_NO_FLUSH); + if (ret == Z_DATA_ERROR) { + gz->err = Z_DATA_ERROR; + gz->msg = strm->msg; + return 0; + } + if (ret == Z_STREAM_END) + inflateReset(strm); + } while (strm->avail_out); + return len - strm->avail_out; +} + +int gzclose OF((gzFile)); + +int gzclose(gz) + gzFile gz; +{ + z_stream *strm; + unsigned char out[BUFLEN]; + + if (gz == NULL) + return Z_STREAM_ERROR; + strm = &(gz->strm); + if (gz->write) { + strm->next_in = Z_NULL; + strm->avail_in = 0; + do { + strm->next_out = out; + strm->avail_out = BUFLEN; + (void)deflate(strm, Z_FINISH); + fwrite(out, 1, BUFLEN - strm->avail_out, gz->file); + } while (strm->avail_out == 0); + deflateEnd(strm); + } + else + inflateEnd(strm); + fclose(gz->file); + free(gz); + return Z_OK; +} + +const char *gzerror OF((gzFile, int *)); + +const char *gzerror(gz, err) + gzFile gz; + int *err; +{ + *err = gz->err; + return gz->msg; +} + +#endif + +char *prog; + +void error OF((const char *msg)); +void gz_compress OF((FILE *in, gzFile out)); +#ifdef USE_MMAP +int gz_compress_mmap OF((FILE *in, gzFile out)); +#endif +void gz_uncompress OF((gzFile in, FILE *out)); +void file_compress OF((char *file, char *mode)); +void file_uncompress OF((char *file)); +int main OF((int argc, char *argv[])); + +/* =========================================================================== + * Display error message and exit + */ +void error(msg) + const char *msg; +{ + fprintf(stderr, "%s: %s\n", prog, msg); + exit(1); +} + +/* =========================================================================== + * Compress input to output then close both files. + */ + +void gz_compress(in, out) + FILE *in; + gzFile out; +{ + local char buf[BUFLEN]; + int len; + int err; + +#ifdef USE_MMAP + /* Try first compressing with mmap. If mmap fails (minigzip used in a + * pipe), use the normal fread loop. + */ + if (gz_compress_mmap(in, out) == Z_OK) return; +#endif + for (;;) { + len = (int)fread(buf, 1, sizeof(buf), in); + if (ferror(in)) { + perror("fread"); + exit(1); + } + if (len == 0) break; + + if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err)); + } + fclose(in); + if (gzclose(out) != Z_OK) error("failed gzclose"); +} + +#ifdef USE_MMAP /* MMAP version, Miguel Albrecht */ + +/* Try compressing the input file at once using mmap. Return Z_OK if + * if success, Z_ERRNO otherwise. + */ +int gz_compress_mmap(in, out) + FILE *in; + gzFile out; +{ + int len; + int err; + int ifd = fileno(in); + caddr_t buf; /* mmap'ed buffer for the entire input file */ + off_t buf_len; /* length of the input file */ + struct stat sb; + + /* Determine the size of the file, needed for mmap: */ + if (fstat(ifd, &sb) < 0) return Z_ERRNO; + buf_len = sb.st_size; + if (buf_len <= 0) return Z_ERRNO; + + /* Now do the actual mmap: */ + buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); + if (buf == (caddr_t)(-1)) return Z_ERRNO; + + /* Compress the whole file at once: */ + len = gzwrite(out, (char *)buf, (unsigned)buf_len); + + if (len != (int)buf_len) error(gzerror(out, &err)); + + munmap(buf, buf_len); + fclose(in); + if (gzclose(out) != Z_OK) error("failed gzclose"); + return Z_OK; +} +#endif /* USE_MMAP */ + +/* =========================================================================== + * Uncompress input to output then close both files. + */ +void gz_uncompress(in, out) + gzFile in; + FILE *out; +{ + local char buf[BUFLEN]; + int len; + int err; + + for (;;) { + len = gzread(in, buf, sizeof(buf)); + if (len < 0) error (gzerror(in, &err)); + if (len == 0) break; + + if ((int)fwrite(buf, 1, (unsigned)len, out) != len) { + error("failed fwrite"); + } + } + if (fclose(out)) error("failed fclose"); + + if (gzclose(in) != Z_OK) error("failed gzclose"); +} + + +/* =========================================================================== + * Compress the given file: create a corresponding .gz file and remove the + * original. + */ +void file_compress(file, mode) + char *file; + char *mode; +{ + local char outfile[MAX_NAME_LEN]; + FILE *in; + gzFile out; + + if (strlen(file) + strlen(GZ_SUFFIX) >= sizeof(outfile)) { + fprintf(stderr, "%s: filename too long\n", prog); + exit(1); + } + +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(outfile, sizeof(outfile), "%s%s", file, GZ_SUFFIX); +#else + strcpy(outfile, file); + strcat(outfile, GZ_SUFFIX); +#endif + + in = fopen(file, "rb"); + if (in == NULL) { + perror(file); + exit(1); + } + out = gzopen(outfile, mode); + if (out == NULL) { + fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile); + exit(1); + } + gz_compress(in, out); + + unlink(file); +} + + +/* =========================================================================== + * Uncompress the given file and remove the original. + */ +void file_uncompress(file) + char *file; +{ + local char buf[MAX_NAME_LEN]; + char *infile, *outfile; + FILE *out; + gzFile in; + size_t len = strlen(file); + + if (len + strlen(GZ_SUFFIX) >= sizeof(buf)) { + fprintf(stderr, "%s: filename too long\n", prog); + exit(1); + } + +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(buf, sizeof(buf), "%s", file); +#else + strcpy(buf, file); +#endif + + if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) { + infile = file; + outfile = buf; + outfile[len-3] = '\0'; + } else { + outfile = file; + infile = buf; +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(buf + len, sizeof(buf) - len, "%s", GZ_SUFFIX); +#else + strcat(infile, GZ_SUFFIX); +#endif + } + in = gzopen(infile, "rb"); + if (in == NULL) { + fprintf(stderr, "%s: can't gzopen %s\n", prog, infile); + exit(1); + } + out = fopen(outfile, "wb"); + if (out == NULL) { + perror(file); + exit(1); + } + + gz_uncompress(in, out); + + unlink(infile); +} + + +/* =========================================================================== + * Usage: minigzip [-c] [-d] [-f] [-h] [-r] [-1 to -9] [files...] + * -c : write to standard output + * -d : decompress + * -f : compress with Z_FILTERED + * -h : compress with Z_HUFFMAN_ONLY + * -r : compress with Z_RLE + * -1 to -9 : compression level + */ + +int main(argc, argv) + int argc; + char *argv[]; +{ + int copyout = 0; + int uncompr = 0; + gzFile file; + char *bname, outmode[20]; + +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(outmode, sizeof(outmode), "%s", "wb6 "); +#else + strcpy(outmode, "wb6 "); +#endif + + prog = argv[0]; + bname = strrchr(argv[0], '/'); + if (bname) + bname++; + else + bname = argv[0]; + argc--, argv++; + + if (!strcmp(bname, "gunzip")) + uncompr = 1; + else if (!strcmp(bname, "zcat")) + copyout = uncompr = 1; + + while (argc > 0) { + if (strcmp(*argv, "-c") == 0) + copyout = 1; + else if (strcmp(*argv, "-d") == 0) + uncompr = 1; + else if (strcmp(*argv, "-f") == 0) + outmode[3] = 'f'; + else if (strcmp(*argv, "-h") == 0) + outmode[3] = 'h'; + else if (strcmp(*argv, "-r") == 0) + outmode[3] = 'R'; + else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' && + (*argv)[2] == 0) + outmode[2] = (*argv)[1]; + else + break; + argc--, argv++; + } + if (outmode[3] == ' ') + outmode[3] = 0; + if (argc == 0) { + SET_BINARY_MODE(stdin); + SET_BINARY_MODE(stdout); + if (uncompr) { + file = gzdopen(fileno(stdin), "rb"); + if (file == NULL) error("can't gzdopen stdin"); + gz_uncompress(file, stdout); + } else { + file = gzdopen(fileno(stdout), outmode); + if (file == NULL) error("can't gzdopen stdout"); + gz_compress(stdin, file); + } + } else { + if (copyout) { + SET_BINARY_MODE(stdout); + } + do { + if (uncompr) { + if (copyout) { + file = gzopen(*argv, "rb"); + if (file == NULL) + fprintf(stderr, "%s: can't gzopen %s\n", prog, *argv); + else + gz_uncompress(file, stdout); + } else { + file_uncompress(*argv); + } + } else { + if (copyout) { + FILE * in = fopen(*argv, "rb"); + + if (in == NULL) { + perror(*argv); + } else { + file = gzdopen(fileno(stdout), outmode); + if (file == NULL) error("can't gzdopen stdout"); + + gz_compress(in, file); + } + + } else { + file_compress(*argv, outmode); + } + } + } while (argv++, --argc); + } + return 0; +} diff --git a/src/SDL2/external/zlib-1.2.8/treebuild.xml b/src/SDL2/external/zlib-1.2.8/treebuild.xml new file mode 100644 index 000000000..38d29d75e --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/treebuild.xml @@ -0,0 +1,116 @@ + + + + zip compression library + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/SDL2/external/zlib-1.2.8/trees.c b/src/SDL2/external/zlib-1.2.8/trees.c new file mode 100644 index 000000000..1fd7759ef --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/trees.c @@ -0,0 +1,1226 @@ +/* trees.c -- output deflated data using Huffman coding + * Copyright (C) 1995-2012 Jean-loup Gailly + * detect_data_type() function provided freely by Cosmin Truta, 2006 + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * ALGORITHM + * + * The "deflation" process uses several Huffman trees. The more + * common source values are represented by shorter bit sequences. + * + * Each code tree is stored in a compressed form which is itself + * a Huffman encoding of the lengths of all the code strings (in + * ascending order by source values). The actual code strings are + * reconstructed from the lengths in the inflate process, as described + * in the deflate specification. + * + * REFERENCES + * + * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". + * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc + * + * Storer, James A. + * Data Compression: Methods and Theory, pp. 49-50. + * Computer Science Press, 1988. ISBN 0-7167-8156-5. + * + * Sedgewick, R. + * Algorithms, p290. + * Addison-Wesley, 1983. ISBN 0-201-06672-6. + */ + +/* @(#) $Id$ */ + +/* #define GEN_TREES_H */ + +#include "deflate.h" + +#ifdef DEBUG +# include +#endif + +/* =========================================================================== + * Constants + */ + +#define MAX_BL_BITS 7 +/* Bit length codes must not exceed MAX_BL_BITS bits */ + +#define END_BLOCK 256 +/* end of block literal code */ + +#define REP_3_6 16 +/* repeat previous bit length 3-6 times (2 bits of repeat count) */ + +#define REPZ_3_10 17 +/* repeat a zero length 3-10 times (3 bits of repeat count) */ + +#define REPZ_11_138 18 +/* repeat a zero length 11-138 times (7 bits of repeat count) */ + +local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ + = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0}; + +local const int extra_dbits[D_CODES] /* extra bits for each distance code */ + = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; + +local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */ + = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7}; + +local const uch bl_order[BL_CODES] + = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15}; +/* The lengths of the bit length codes are sent in order of decreasing + * probability, to avoid transmitting the lengths for unused bit length codes. + */ + +/* =========================================================================== + * Local data. These are initialized only once. + */ + +#define DIST_CODE_LEN 512 /* see definition of array dist_code below */ + +#if defined(GEN_TREES_H) || !defined(STDC) +/* non ANSI compilers may not accept trees.h */ + +local ct_data static_ltree[L_CODES+2]; +/* The static literal tree. Since the bit lengths are imposed, there is no + * need for the L_CODES extra codes used during heap construction. However + * The codes 286 and 287 are needed to build a canonical tree (see _tr_init + * below). + */ + +local ct_data static_dtree[D_CODES]; +/* The static distance tree. (Actually a trivial tree since all codes use + * 5 bits.) + */ + +uch _dist_code[DIST_CODE_LEN]; +/* Distance codes. The first 256 values correspond to the distances + * 3 .. 258, the last 256 values correspond to the top 8 bits of + * the 15 bit distances. + */ + +uch _length_code[MAX_MATCH-MIN_MATCH+1]; +/* length code for each normalized match length (0 == MIN_MATCH) */ + +local int base_length[LENGTH_CODES]; +/* First normalized length for each code (0 = MIN_MATCH) */ + +local int base_dist[D_CODES]; +/* First normalized distance for each code (0 = distance of 1) */ + +#else +# include "trees.h" +#endif /* GEN_TREES_H */ + +struct static_tree_desc_s { + const ct_data *static_tree; /* static tree or NULL */ + const intf *extra_bits; /* extra bits for each code or NULL */ + int extra_base; /* base index for extra_bits */ + int elems; /* max number of elements in the tree */ + int max_length; /* max bit length for the codes */ +}; + +local static_tree_desc static_l_desc = +{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS}; + +local static_tree_desc static_d_desc = +{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS}; + +local static_tree_desc static_bl_desc = +{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; + +/* =========================================================================== + * Local (static) routines in this file. + */ + +local void tr_static_init OF((void)); +local void init_block OF((deflate_state *s)); +local void pqdownheap OF((deflate_state *s, ct_data *tree, int k)); +local void gen_bitlen OF((deflate_state *s, tree_desc *desc)); +local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count)); +local void build_tree OF((deflate_state *s, tree_desc *desc)); +local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code)); +local void send_tree OF((deflate_state *s, ct_data *tree, int max_code)); +local int build_bl_tree OF((deflate_state *s)); +local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes, + int blcodes)); +local void compress_block OF((deflate_state *s, const ct_data *ltree, + const ct_data *dtree)); +local int detect_data_type OF((deflate_state *s)); +local unsigned bi_reverse OF((unsigned value, int length)); +local void bi_windup OF((deflate_state *s)); +local void bi_flush OF((deflate_state *s)); +local void copy_block OF((deflate_state *s, charf *buf, unsigned len, + int header)); + +#ifdef GEN_TREES_H +local void gen_trees_header OF((void)); +#endif + +#ifndef DEBUG +# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len) + /* Send a code of the given tree. c and tree must not have side effects */ + +#else /* DEBUG */ +# define send_code(s, c, tree) \ + { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ + send_bits(s, tree[c].Code, tree[c].Len); } +#endif + +/* =========================================================================== + * Output a short LSB first on the stream. + * IN assertion: there is enough room in pendingBuf. + */ +#define put_short(s, w) { \ + put_byte(s, (uch)((w) & 0xff)); \ + put_byte(s, (uch)((ush)(w) >> 8)); \ +} + +/* =========================================================================== + * Send a value on a given number of bits. + * IN assertion: length <= 16 and value fits in length bits. + */ +#ifdef DEBUG +local void send_bits OF((deflate_state *s, int value, int length)); + +local void send_bits(s, value, length) + deflate_state *s; + int value; /* value to send */ + int length; /* number of bits */ +{ + Tracevv((stderr," l %2d v %4x ", length, value)); + Assert(length > 0 && length <= 15, "invalid length"); + s->bits_sent += (ulg)length; + + /* If not enough room in bi_buf, use (valid) bits from bi_buf and + * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid)) + * unused bits in value. + */ + if (s->bi_valid > (int)Buf_size - length) { + s->bi_buf |= (ush)value << s->bi_valid; + put_short(s, s->bi_buf); + s->bi_buf = (ush)value >> (Buf_size - s->bi_valid); + s->bi_valid += length - Buf_size; + } else { + s->bi_buf |= (ush)value << s->bi_valid; + s->bi_valid += length; + } +} +#else /* !DEBUG */ + +#define send_bits(s, value, length) \ +{ int len = length;\ + if (s->bi_valid > (int)Buf_size - len) {\ + int val = value;\ + s->bi_buf |= (ush)val << s->bi_valid;\ + put_short(s, s->bi_buf);\ + s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\ + s->bi_valid += len - Buf_size;\ + } else {\ + s->bi_buf |= (ush)(value) << s->bi_valid;\ + s->bi_valid += len;\ + }\ +} +#endif /* DEBUG */ + + +/* the arguments must not have side effects */ + +/* =========================================================================== + * Initialize the various 'constant' tables. + */ +local void tr_static_init() +{ +#if defined(GEN_TREES_H) || !defined(STDC) + static int static_init_done = 0; + int n; /* iterates over tree elements */ + int bits; /* bit counter */ + int length; /* length value */ + int code; /* code value */ + int dist; /* distance index */ + ush bl_count[MAX_BITS+1]; + /* number of codes at each bit length for an optimal tree */ + + if (static_init_done) return; + + /* For some embedded targets, global variables are not initialized: */ +#ifdef NO_INIT_GLOBAL_POINTERS + static_l_desc.static_tree = static_ltree; + static_l_desc.extra_bits = extra_lbits; + static_d_desc.static_tree = static_dtree; + static_d_desc.extra_bits = extra_dbits; + static_bl_desc.extra_bits = extra_blbits; +#endif + + /* Initialize the mapping length (0..255) -> length code (0..28) */ + length = 0; + for (code = 0; code < LENGTH_CODES-1; code++) { + base_length[code] = length; + for (n = 0; n < (1< dist code (0..29) */ + dist = 0; + for (code = 0 ; code < 16; code++) { + base_dist[code] = dist; + for (n = 0; n < (1<>= 7; /* from now on, all distances are divided by 128 */ + for ( ; code < D_CODES; code++) { + base_dist[code] = dist << 7; + for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) { + _dist_code[256 + dist++] = (uch)code; + } + } + Assert (dist == 256, "tr_static_init: 256+dist != 512"); + + /* Construct the codes of the static literal tree */ + for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0; + n = 0; + while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++; + while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++; + while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++; + while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++; + /* Codes 286 and 287 do not exist, but we must include them in the + * tree construction to get a canonical Huffman tree (longest code + * all ones) + */ + gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count); + + /* The static distance tree is trivial: */ + for (n = 0; n < D_CODES; n++) { + static_dtree[n].Len = 5; + static_dtree[n].Code = bi_reverse((unsigned)n, 5); + } + static_init_done = 1; + +# ifdef GEN_TREES_H + gen_trees_header(); +# endif +#endif /* defined(GEN_TREES_H) || !defined(STDC) */ +} + +/* =========================================================================== + * Genererate the file trees.h describing the static trees. + */ +#ifdef GEN_TREES_H +# ifndef DEBUG +# include +# endif + +# define SEPARATOR(i, last, width) \ + ((i) == (last)? "\n};\n\n" : \ + ((i) % (width) == (width)-1 ? ",\n" : ", ")) + +void gen_trees_header() +{ + FILE *header = fopen("trees.h", "w"); + int i; + + Assert (header != NULL, "Can't open trees.h"); + fprintf(header, + "/* header created automatically with -DGEN_TREES_H */\n\n"); + + fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n"); + for (i = 0; i < L_CODES+2; i++) { + fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code, + static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5)); + } + + fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n"); + for (i = 0; i < D_CODES; i++) { + fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code, + static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5)); + } + + fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n"); + for (i = 0; i < DIST_CODE_LEN; i++) { + fprintf(header, "%2u%s", _dist_code[i], + SEPARATOR(i, DIST_CODE_LEN-1, 20)); + } + + fprintf(header, + "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n"); + for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) { + fprintf(header, "%2u%s", _length_code[i], + SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20)); + } + + fprintf(header, "local const int base_length[LENGTH_CODES] = {\n"); + for (i = 0; i < LENGTH_CODES; i++) { + fprintf(header, "%1u%s", base_length[i], + SEPARATOR(i, LENGTH_CODES-1, 20)); + } + + fprintf(header, "local const int base_dist[D_CODES] = {\n"); + for (i = 0; i < D_CODES; i++) { + fprintf(header, "%5u%s", base_dist[i], + SEPARATOR(i, D_CODES-1, 10)); + } + + fclose(header); +} +#endif /* GEN_TREES_H */ + +/* =========================================================================== + * Initialize the tree data structures for a new zlib stream. + */ +void ZLIB_INTERNAL _tr_init(s) + deflate_state *s; +{ + tr_static_init(); + + s->l_desc.dyn_tree = s->dyn_ltree; + s->l_desc.stat_desc = &static_l_desc; + + s->d_desc.dyn_tree = s->dyn_dtree; + s->d_desc.stat_desc = &static_d_desc; + + s->bl_desc.dyn_tree = s->bl_tree; + s->bl_desc.stat_desc = &static_bl_desc; + + s->bi_buf = 0; + s->bi_valid = 0; +#ifdef DEBUG + s->compressed_len = 0L; + s->bits_sent = 0L; +#endif + + /* Initialize the first block of the first file: */ + init_block(s); +} + +/* =========================================================================== + * Initialize a new block. + */ +local void init_block(s) + deflate_state *s; +{ + int n; /* iterates over tree elements */ + + /* Initialize the trees. */ + for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0; + for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0; + for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0; + + s->dyn_ltree[END_BLOCK].Freq = 1; + s->opt_len = s->static_len = 0L; + s->last_lit = s->matches = 0; +} + +#define SMALLEST 1 +/* Index within the heap array of least frequent node in the Huffman tree */ + + +/* =========================================================================== + * Remove the smallest element from the heap and recreate the heap with + * one less element. Updates heap and heap_len. + */ +#define pqremove(s, tree, top) \ +{\ + top = s->heap[SMALLEST]; \ + s->heap[SMALLEST] = s->heap[s->heap_len--]; \ + pqdownheap(s, tree, SMALLEST); \ +} + +/* =========================================================================== + * Compares to subtrees, using the tree depth as tie breaker when + * the subtrees have equal frequency. This minimizes the worst case length. + */ +#define smaller(tree, n, m, depth) \ + (tree[n].Freq < tree[m].Freq || \ + (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m])) + +/* =========================================================================== + * Restore the heap property by moving down the tree starting at node k, + * exchanging a node with the smallest of its two sons if necessary, stopping + * when the heap property is re-established (each father smaller than its + * two sons). + */ +local void pqdownheap(s, tree, k) + deflate_state *s; + ct_data *tree; /* the tree to restore */ + int k; /* node to move down */ +{ + int v = s->heap[k]; + int j = k << 1; /* left son of k */ + while (j <= s->heap_len) { + /* Set j to the smallest of the two sons: */ + if (j < s->heap_len && + smaller(tree, s->heap[j+1], s->heap[j], s->depth)) { + j++; + } + /* Exit if v is smaller than both sons */ + if (smaller(tree, v, s->heap[j], s->depth)) break; + + /* Exchange v with the smallest son */ + s->heap[k] = s->heap[j]; k = j; + + /* And continue down the tree, setting j to the left son of k */ + j <<= 1; + } + s->heap[k] = v; +} + +/* =========================================================================== + * Compute the optimal bit lengths for a tree and update the total bit length + * for the current block. + * IN assertion: the fields freq and dad are set, heap[heap_max] and + * above are the tree nodes sorted by increasing frequency. + * OUT assertions: the field len is set to the optimal bit length, the + * array bl_count contains the frequencies for each bit length. + * The length opt_len is updated; static_len is also updated if stree is + * not null. + */ +local void gen_bitlen(s, desc) + deflate_state *s; + tree_desc *desc; /* the tree descriptor */ +{ + ct_data *tree = desc->dyn_tree; + int max_code = desc->max_code; + const ct_data *stree = desc->stat_desc->static_tree; + const intf *extra = desc->stat_desc->extra_bits; + int base = desc->stat_desc->extra_base; + int max_length = desc->stat_desc->max_length; + int h; /* heap index */ + int n, m; /* iterate over the tree elements */ + int bits; /* bit length */ + int xbits; /* extra bits */ + ush f; /* frequency */ + int overflow = 0; /* number of elements with bit length too large */ + + for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0; + + /* In a first pass, compute the optimal bit lengths (which may + * overflow in the case of the bit length tree). + */ + tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */ + + for (h = s->heap_max+1; h < HEAP_SIZE; h++) { + n = s->heap[h]; + bits = tree[tree[n].Dad].Len + 1; + if (bits > max_length) bits = max_length, overflow++; + tree[n].Len = (ush)bits; + /* We overwrite tree[n].Dad which is no longer needed */ + + if (n > max_code) continue; /* not a leaf node */ + + s->bl_count[bits]++; + xbits = 0; + if (n >= base) xbits = extra[n-base]; + f = tree[n].Freq; + s->opt_len += (ulg)f * (bits + xbits); + if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits); + } + if (overflow == 0) return; + + Trace((stderr,"\nbit length overflow\n")); + /* This happens for example on obj2 and pic of the Calgary corpus */ + + /* Find the first bit length which could increase: */ + do { + bits = max_length-1; + while (s->bl_count[bits] == 0) bits--; + s->bl_count[bits]--; /* move one leaf down the tree */ + s->bl_count[bits+1] += 2; /* move one overflow item as its brother */ + s->bl_count[max_length]--; + /* The brother of the overflow item also moves one step up, + * but this does not affect bl_count[max_length] + */ + overflow -= 2; + } while (overflow > 0); + + /* Now recompute all bit lengths, scanning in increasing frequency. + * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all + * lengths instead of fixing only the wrong ones. This idea is taken + * from 'ar' written by Haruhiko Okumura.) + */ + for (bits = max_length; bits != 0; bits--) { + n = s->bl_count[bits]; + while (n != 0) { + m = s->heap[--h]; + if (m > max_code) continue; + if ((unsigned) tree[m].Len != (unsigned) bits) { + Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits)); + s->opt_len += ((long)bits - (long)tree[m].Len) + *(long)tree[m].Freq; + tree[m].Len = (ush)bits; + } + n--; + } + } +} + +/* =========================================================================== + * Generate the codes for a given tree and bit counts (which need not be + * optimal). + * IN assertion: the array bl_count contains the bit length statistics for + * the given tree and the field len is set for all tree elements. + * OUT assertion: the field code is set for all tree elements of non + * zero code length. + */ +local void gen_codes (tree, max_code, bl_count) + ct_data *tree; /* the tree to decorate */ + int max_code; /* largest code with non zero frequency */ + ushf *bl_count; /* number of codes at each bit length */ +{ + ush next_code[MAX_BITS+1]; /* next code value for each bit length */ + ush code = 0; /* running code value */ + int bits; /* bit index */ + int n; /* code index */ + + /* The distribution counts are first used to generate the code values + * without bit reversal. + */ + for (bits = 1; bits <= MAX_BITS; bits++) { + next_code[bits] = code = (code + bl_count[bits-1]) << 1; + } + /* Check that the bit counts in bl_count are consistent. The last code + * must be all ones. + */ + Assert (code + bl_count[MAX_BITS]-1 == (1<dyn_tree; + const ct_data *stree = desc->stat_desc->static_tree; + int elems = desc->stat_desc->elems; + int n, m; /* iterate over heap elements */ + int max_code = -1; /* largest code with non zero frequency */ + int node; /* new node being created */ + + /* Construct the initial heap, with least frequent element in + * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. + * heap[0] is not used. + */ + s->heap_len = 0, s->heap_max = HEAP_SIZE; + + for (n = 0; n < elems; n++) { + if (tree[n].Freq != 0) { + s->heap[++(s->heap_len)] = max_code = n; + s->depth[n] = 0; + } else { + tree[n].Len = 0; + } + } + + /* The pkzip format requires that at least one distance code exists, + * and that at least one bit should be sent even if there is only one + * possible code. So to avoid special checks later on we force at least + * two codes of non zero frequency. + */ + while (s->heap_len < 2) { + node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0); + tree[node].Freq = 1; + s->depth[node] = 0; + s->opt_len--; if (stree) s->static_len -= stree[node].Len; + /* node is 0 or 1 so it does not have extra bits */ + } + desc->max_code = max_code; + + /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, + * establish sub-heaps of increasing lengths: + */ + for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n); + + /* Construct the Huffman tree by repeatedly combining the least two + * frequent nodes. + */ + node = elems; /* next internal node of the tree */ + do { + pqremove(s, tree, n); /* n = node of least frequency */ + m = s->heap[SMALLEST]; /* m = node of next least frequency */ + + s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */ + s->heap[--(s->heap_max)] = m; + + /* Create a new node father of n and m */ + tree[node].Freq = tree[n].Freq + tree[m].Freq; + s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ? + s->depth[n] : s->depth[m]) + 1); + tree[n].Dad = tree[m].Dad = (ush)node; +#ifdef DUMP_BL_TREE + if (tree == s->bl_tree) { + fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)", + node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq); + } +#endif + /* and insert the new node in the heap */ + s->heap[SMALLEST] = node++; + pqdownheap(s, tree, SMALLEST); + + } while (s->heap_len >= 2); + + s->heap[--(s->heap_max)] = s->heap[SMALLEST]; + + /* At this point, the fields freq and dad are set. We can now + * generate the bit lengths. + */ + gen_bitlen(s, (tree_desc *)desc); + + /* The field len is now set, we can generate the bit codes */ + gen_codes ((ct_data *)tree, max_code, s->bl_count); +} + +/* =========================================================================== + * Scan a literal or distance tree to determine the frequencies of the codes + * in the bit length tree. + */ +local void scan_tree (s, tree, max_code) + deflate_state *s; + ct_data *tree; /* the tree to be scanned */ + int max_code; /* and its largest code of non zero frequency */ +{ + int n; /* iterates over all tree elements */ + int prevlen = -1; /* last emitted length */ + int curlen; /* length of current code */ + int nextlen = tree[0].Len; /* length of next code */ + int count = 0; /* repeat count of the current code */ + int max_count = 7; /* max repeat count */ + int min_count = 4; /* min repeat count */ + + if (nextlen == 0) max_count = 138, min_count = 3; + tree[max_code+1].Len = (ush)0xffff; /* guard */ + + for (n = 0; n <= max_code; n++) { + curlen = nextlen; nextlen = tree[n+1].Len; + if (++count < max_count && curlen == nextlen) { + continue; + } else if (count < min_count) { + s->bl_tree[curlen].Freq += count; + } else if (curlen != 0) { + if (curlen != prevlen) s->bl_tree[curlen].Freq++; + s->bl_tree[REP_3_6].Freq++; + } else if (count <= 10) { + s->bl_tree[REPZ_3_10].Freq++; + } else { + s->bl_tree[REPZ_11_138].Freq++; + } + count = 0; prevlen = curlen; + if (nextlen == 0) { + max_count = 138, min_count = 3; + } else if (curlen == nextlen) { + max_count = 6, min_count = 3; + } else { + max_count = 7, min_count = 4; + } + } +} + +/* =========================================================================== + * Send a literal or distance tree in compressed form, using the codes in + * bl_tree. + */ +local void send_tree (s, tree, max_code) + deflate_state *s; + ct_data *tree; /* the tree to be scanned */ + int max_code; /* and its largest code of non zero frequency */ +{ + int n; /* iterates over all tree elements */ + int prevlen = -1; /* last emitted length */ + int curlen; /* length of current code */ + int nextlen = tree[0].Len; /* length of next code */ + int count = 0; /* repeat count of the current code */ + int max_count = 7; /* max repeat count */ + int min_count = 4; /* min repeat count */ + + /* tree[max_code+1].Len = -1; */ /* guard already set */ + if (nextlen == 0) max_count = 138, min_count = 3; + + for (n = 0; n <= max_code; n++) { + curlen = nextlen; nextlen = tree[n+1].Len; + if (++count < max_count && curlen == nextlen) { + continue; + } else if (count < min_count) { + do { send_code(s, curlen, s->bl_tree); } while (--count != 0); + + } else if (curlen != 0) { + if (curlen != prevlen) { + send_code(s, curlen, s->bl_tree); count--; + } + Assert(count >= 3 && count <= 6, " 3_6?"); + send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2); + + } else if (count <= 10) { + send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3); + + } else { + send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7); + } + count = 0; prevlen = curlen; + if (nextlen == 0) { + max_count = 138, min_count = 3; + } else if (curlen == nextlen) { + max_count = 6, min_count = 3; + } else { + max_count = 7, min_count = 4; + } + } +} + +/* =========================================================================== + * Construct the Huffman tree for the bit lengths and return the index in + * bl_order of the last bit length code to send. + */ +local int build_bl_tree(s) + deflate_state *s; +{ + int max_blindex; /* index of last bit length code of non zero freq */ + + /* Determine the bit length frequencies for literal and distance trees */ + scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code); + scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code); + + /* Build the bit length tree: */ + build_tree(s, (tree_desc *)(&(s->bl_desc))); + /* opt_len now includes the length of the tree representations, except + * the lengths of the bit lengths codes and the 5+5+4 bits for the counts. + */ + + /* Determine the number of bit length codes to send. The pkzip format + * requires that at least 4 bit length codes be sent. (appnote.txt says + * 3 but the actual value used is 4.) + */ + for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) { + if (s->bl_tree[bl_order[max_blindex]].Len != 0) break; + } + /* Update opt_len to include the bit length tree and counts */ + s->opt_len += 3*(max_blindex+1) + 5+5+4; + Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", + s->opt_len, s->static_len)); + + return max_blindex; +} + +/* =========================================================================== + * Send the header for a block using dynamic Huffman trees: the counts, the + * lengths of the bit length codes, the literal tree and the distance tree. + * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4. + */ +local void send_all_trees(s, lcodes, dcodes, blcodes) + deflate_state *s; + int lcodes, dcodes, blcodes; /* number of codes for each tree */ +{ + int rank; /* index in bl_order */ + + Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes"); + Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES, + "too many codes"); + Tracev((stderr, "\nbl counts: ")); + send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */ + send_bits(s, dcodes-1, 5); + send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */ + for (rank = 0; rank < blcodes; rank++) { + Tracev((stderr, "\nbl code %2d ", bl_order[rank])); + send_bits(s, s->bl_tree[bl_order[rank]].Len, 3); + } + Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent)); + + send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */ + Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent)); + + send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */ + Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent)); +} + +/* =========================================================================== + * Send a stored block + */ +void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last) + deflate_state *s; + charf *buf; /* input block */ + ulg stored_len; /* length of input block */ + int last; /* one if this is the last block for a file */ +{ + send_bits(s, (STORED_BLOCK<<1)+last, 3); /* send block type */ +#ifdef DEBUG + s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L; + s->compressed_len += (stored_len + 4) << 3; +#endif + copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ +} + +/* =========================================================================== + * Flush the bits in the bit buffer to pending output (leaves at most 7 bits) + */ +void ZLIB_INTERNAL _tr_flush_bits(s) + deflate_state *s; +{ + bi_flush(s); +} + +/* =========================================================================== + * Send one empty static block to give enough lookahead for inflate. + * This takes 10 bits, of which 7 may remain in the bit buffer. + */ +void ZLIB_INTERNAL _tr_align(s) + deflate_state *s; +{ + send_bits(s, STATIC_TREES<<1, 3); + send_code(s, END_BLOCK, static_ltree); +#ifdef DEBUG + s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ +#endif + bi_flush(s); +} + +/* =========================================================================== + * Determine the best encoding for the current block: dynamic trees, static + * trees or store, and output the encoded block to the zip file. + */ +void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last) + deflate_state *s; + charf *buf; /* input block, or NULL if too old */ + ulg stored_len; /* length of input block */ + int last; /* one if this is the last block for a file */ +{ + ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */ + int max_blindex = 0; /* index of last bit length code of non zero freq */ + + /* Build the Huffman trees unless a stored block is forced */ + if (s->level > 0) { + + /* Check if the file is binary or text */ + if (s->strm->data_type == Z_UNKNOWN) + s->strm->data_type = detect_data_type(s); + + /* Construct the literal and distance trees */ + build_tree(s, (tree_desc *)(&(s->l_desc))); + Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len, + s->static_len)); + + build_tree(s, (tree_desc *)(&(s->d_desc))); + Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len, + s->static_len)); + /* At this point, opt_len and static_len are the total bit lengths of + * the compressed block data, excluding the tree representations. + */ + + /* Build the bit length tree for the above two trees, and get the index + * in bl_order of the last bit length code to send. + */ + max_blindex = build_bl_tree(s); + + /* Determine the best encoding. Compute the block lengths in bytes. */ + opt_lenb = (s->opt_len+3+7)>>3; + static_lenb = (s->static_len+3+7)>>3; + + Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ", + opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len, + s->last_lit)); + + if (static_lenb <= opt_lenb) opt_lenb = static_lenb; + + } else { + Assert(buf != (char*)0, "lost buf"); + opt_lenb = static_lenb = stored_len + 5; /* force a stored block */ + } + +#ifdef FORCE_STORED + if (buf != (char*)0) { /* force stored block */ +#else + if (stored_len+4 <= opt_lenb && buf != (char*)0) { + /* 4: two words for the lengths */ +#endif + /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. + * Otherwise we can't have processed more than WSIZE input bytes since + * the last block flush, because compression would have been + * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to + * transform a block into a stored block. + */ + _tr_stored_block(s, buf, stored_len, last); + +#ifdef FORCE_STATIC + } else if (static_lenb >= 0) { /* force static trees */ +#else + } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) { +#endif + send_bits(s, (STATIC_TREES<<1)+last, 3); + compress_block(s, (const ct_data *)static_ltree, + (const ct_data *)static_dtree); +#ifdef DEBUG + s->compressed_len += 3 + s->static_len; +#endif + } else { + send_bits(s, (DYN_TREES<<1)+last, 3); + send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, + max_blindex+1); + compress_block(s, (const ct_data *)s->dyn_ltree, + (const ct_data *)s->dyn_dtree); +#ifdef DEBUG + s->compressed_len += 3 + s->opt_len; +#endif + } + Assert (s->compressed_len == s->bits_sent, "bad compressed size"); + /* The above check is made mod 2^32, for files larger than 512 MB + * and uLong implemented on 32 bits. + */ + init_block(s); + + if (last) { + bi_windup(s); +#ifdef DEBUG + s->compressed_len += 7; /* align on byte boundary */ +#endif + } + Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3, + s->compressed_len-7*last)); +} + +/* =========================================================================== + * Save the match info and tally the frequency counts. Return true if + * the current block must be flushed. + */ +int ZLIB_INTERNAL _tr_tally (s, dist, lc) + deflate_state *s; + unsigned dist; /* distance of matched string */ + unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */ +{ + s->d_buf[s->last_lit] = (ush)dist; + s->l_buf[s->last_lit++] = (uch)lc; + if (dist == 0) { + /* lc is the unmatched char */ + s->dyn_ltree[lc].Freq++; + } else { + s->matches++; + /* Here, lc is the match length - MIN_MATCH */ + dist--; /* dist = match distance - 1 */ + Assert((ush)dist < (ush)MAX_DIST(s) && + (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) && + (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match"); + + s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++; + s->dyn_dtree[d_code(dist)].Freq++; + } + +#ifdef TRUNCATE_BLOCK + /* Try to guess if it is profitable to stop the current block here */ + if ((s->last_lit & 0x1fff) == 0 && s->level > 2) { + /* Compute an upper bound for the compressed length */ + ulg out_length = (ulg)s->last_lit*8L; + ulg in_length = (ulg)((long)s->strstart - s->block_start); + int dcode; + for (dcode = 0; dcode < D_CODES; dcode++) { + out_length += (ulg)s->dyn_dtree[dcode].Freq * + (5L+extra_dbits[dcode]); + } + out_length >>= 3; + Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ", + s->last_lit, in_length, out_length, + 100L - out_length*100L/in_length)); + if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1; + } +#endif + return (s->last_lit == s->lit_bufsize-1); + /* We avoid equality with lit_bufsize because of wraparound at 64K + * on 16 bit machines and because stored blocks are restricted to + * 64K-1 bytes. + */ +} + +/* =========================================================================== + * Send the block data compressed using the given Huffman trees + */ +local void compress_block(s, ltree, dtree) + deflate_state *s; + const ct_data *ltree; /* literal tree */ + const ct_data *dtree; /* distance tree */ +{ + unsigned dist; /* distance of matched string */ + int lc; /* match length or unmatched char (if dist == 0) */ + unsigned lx = 0; /* running index in l_buf */ + unsigned code; /* the code to send */ + int extra; /* number of extra bits to send */ + + if (s->last_lit != 0) do { + dist = s->d_buf[lx]; + lc = s->l_buf[lx++]; + if (dist == 0) { + send_code(s, lc, ltree); /* send a literal byte */ + Tracecv(isgraph(lc), (stderr," '%c' ", lc)); + } else { + /* Here, lc is the match length - MIN_MATCH */ + code = _length_code[lc]; + send_code(s, code+LITERALS+1, ltree); /* send the length code */ + extra = extra_lbits[code]; + if (extra != 0) { + lc -= base_length[code]; + send_bits(s, lc, extra); /* send the extra length bits */ + } + dist--; /* dist is now the match distance - 1 */ + code = d_code(dist); + Assert (code < D_CODES, "bad d_code"); + + send_code(s, code, dtree); /* send the distance code */ + extra = extra_dbits[code]; + if (extra != 0) { + dist -= base_dist[code]; + send_bits(s, dist, extra); /* send the extra distance bits */ + } + } /* literal or match pair ? */ + + /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */ + Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx, + "pendingBuf overflow"); + + } while (lx < s->last_lit); + + send_code(s, END_BLOCK, ltree); +} + +/* =========================================================================== + * Check if the data type is TEXT or BINARY, using the following algorithm: + * - TEXT if the two conditions below are satisfied: + * a) There are no non-portable control characters belonging to the + * "black list" (0..6, 14..25, 28..31). + * b) There is at least one printable character belonging to the + * "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255). + * - BINARY otherwise. + * - The following partially-portable control characters form a + * "gray list" that is ignored in this detection algorithm: + * (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}). + * IN assertion: the fields Freq of dyn_ltree are set. + */ +local int detect_data_type(s) + deflate_state *s; +{ + /* black_mask is the bit mask of black-listed bytes + * set bits 0..6, 14..25, and 28..31 + * 0xf3ffc07f = binary 11110011111111111100000001111111 + */ + unsigned long black_mask = 0xf3ffc07fUL; + int n; + + /* Check for non-textual ("black-listed") bytes. */ + for (n = 0; n <= 31; n++, black_mask >>= 1) + if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0)) + return Z_BINARY; + + /* Check for textual ("white-listed") bytes. */ + if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0 + || s->dyn_ltree[13].Freq != 0) + return Z_TEXT; + for (n = 32; n < LITERALS; n++) + if (s->dyn_ltree[n].Freq != 0) + return Z_TEXT; + + /* There are no "black-listed" or "white-listed" bytes: + * this stream either is empty or has tolerated ("gray-listed") bytes only. + */ + return Z_BINARY; +} + +/* =========================================================================== + * Reverse the first len bits of a code, using straightforward code (a faster + * method would use a table) + * IN assertion: 1 <= len <= 15 + */ +local unsigned bi_reverse(code, len) + unsigned code; /* the value to invert */ + int len; /* its bit length */ +{ + register unsigned res = 0; + do { + res |= code & 1; + code >>= 1, res <<= 1; + } while (--len > 0); + return res >> 1; +} + +/* =========================================================================== + * Flush the bit buffer, keeping at most 7 bits in it. + */ +local void bi_flush(s) + deflate_state *s; +{ + if (s->bi_valid == 16) { + put_short(s, s->bi_buf); + s->bi_buf = 0; + s->bi_valid = 0; + } else if (s->bi_valid >= 8) { + put_byte(s, (Byte)s->bi_buf); + s->bi_buf >>= 8; + s->bi_valid -= 8; + } +} + +/* =========================================================================== + * Flush the bit buffer and align the output on a byte boundary + */ +local void bi_windup(s) + deflate_state *s; +{ + if (s->bi_valid > 8) { + put_short(s, s->bi_buf); + } else if (s->bi_valid > 0) { + put_byte(s, (Byte)s->bi_buf); + } + s->bi_buf = 0; + s->bi_valid = 0; +#ifdef DEBUG + s->bits_sent = (s->bits_sent+7) & ~7; +#endif +} + +/* =========================================================================== + * Copy a stored block, storing first the length and its + * one's complement if requested. + */ +local void copy_block(s, buf, len, header) + deflate_state *s; + charf *buf; /* the input data */ + unsigned len; /* its length */ + int header; /* true if block header must be written */ +{ + bi_windup(s); /* align on byte boundary */ + + if (header) { + put_short(s, (ush)len); + put_short(s, (ush)~len); +#ifdef DEBUG + s->bits_sent += 2*16; +#endif + } +#ifdef DEBUG + s->bits_sent += (ulg)len<<3; +#endif + while (len--) { + put_byte(s, *buf++); + } +} diff --git a/src/SDL2/external/zlib-1.2.8/trees.h b/src/SDL2/external/zlib-1.2.8/trees.h new file mode 100644 index 000000000..d35639d82 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/trees.h @@ -0,0 +1,128 @@ +/* header created automatically with -DGEN_TREES_H */ + +local const ct_data static_ltree[L_CODES+2] = { +{{ 12},{ 8}}, {{140},{ 8}}, {{ 76},{ 8}}, {{204},{ 8}}, {{ 44},{ 8}}, +{{172},{ 8}}, {{108},{ 8}}, {{236},{ 8}}, {{ 28},{ 8}}, {{156},{ 8}}, +{{ 92},{ 8}}, {{220},{ 8}}, {{ 60},{ 8}}, {{188},{ 8}}, {{124},{ 8}}, +{{252},{ 8}}, {{ 2},{ 8}}, {{130},{ 8}}, {{ 66},{ 8}}, {{194},{ 8}}, +{{ 34},{ 8}}, {{162},{ 8}}, {{ 98},{ 8}}, {{226},{ 8}}, {{ 18},{ 8}}, +{{146},{ 8}}, {{ 82},{ 8}}, {{210},{ 8}}, {{ 50},{ 8}}, {{178},{ 8}}, +{{114},{ 8}}, {{242},{ 8}}, {{ 10},{ 8}}, {{138},{ 8}}, {{ 74},{ 8}}, +{{202},{ 8}}, {{ 42},{ 8}}, {{170},{ 8}}, {{106},{ 8}}, {{234},{ 8}}, +{{ 26},{ 8}}, {{154},{ 8}}, {{ 90},{ 8}}, {{218},{ 8}}, {{ 58},{ 8}}, +{{186},{ 8}}, {{122},{ 8}}, {{250},{ 8}}, {{ 6},{ 8}}, {{134},{ 8}}, +{{ 70},{ 8}}, {{198},{ 8}}, {{ 38},{ 8}}, {{166},{ 8}}, {{102},{ 8}}, +{{230},{ 8}}, {{ 22},{ 8}}, {{150},{ 8}}, {{ 86},{ 8}}, {{214},{ 8}}, +{{ 54},{ 8}}, {{182},{ 8}}, {{118},{ 8}}, {{246},{ 8}}, {{ 14},{ 8}}, +{{142},{ 8}}, {{ 78},{ 8}}, {{206},{ 8}}, {{ 46},{ 8}}, {{174},{ 8}}, +{{110},{ 8}}, {{238},{ 8}}, {{ 30},{ 8}}, {{158},{ 8}}, {{ 94},{ 8}}, +{{222},{ 8}}, {{ 62},{ 8}}, {{190},{ 8}}, {{126},{ 8}}, {{254},{ 8}}, +{{ 1},{ 8}}, {{129},{ 8}}, {{ 65},{ 8}}, {{193},{ 8}}, {{ 33},{ 8}}, +{{161},{ 8}}, {{ 97},{ 8}}, {{225},{ 8}}, {{ 17},{ 8}}, {{145},{ 8}}, +{{ 81},{ 8}}, {{209},{ 8}}, {{ 49},{ 8}}, {{177},{ 8}}, {{113},{ 8}}, +{{241},{ 8}}, {{ 9},{ 8}}, {{137},{ 8}}, {{ 73},{ 8}}, {{201},{ 8}}, +{{ 41},{ 8}}, {{169},{ 8}}, {{105},{ 8}}, {{233},{ 8}}, {{ 25},{ 8}}, +{{153},{ 8}}, {{ 89},{ 8}}, {{217},{ 8}}, {{ 57},{ 8}}, {{185},{ 8}}, +{{121},{ 8}}, {{249},{ 8}}, {{ 5},{ 8}}, {{133},{ 8}}, {{ 69},{ 8}}, +{{197},{ 8}}, {{ 37},{ 8}}, {{165},{ 8}}, {{101},{ 8}}, {{229},{ 8}}, +{{ 21},{ 8}}, {{149},{ 8}}, {{ 85},{ 8}}, {{213},{ 8}}, {{ 53},{ 8}}, +{{181},{ 8}}, {{117},{ 8}}, {{245},{ 8}}, {{ 13},{ 8}}, {{141},{ 8}}, +{{ 77},{ 8}}, {{205},{ 8}}, {{ 45},{ 8}}, {{173},{ 8}}, {{109},{ 8}}, +{{237},{ 8}}, {{ 29},{ 8}}, {{157},{ 8}}, {{ 93},{ 8}}, {{221},{ 8}}, +{{ 61},{ 8}}, {{189},{ 8}}, {{125},{ 8}}, {{253},{ 8}}, {{ 19},{ 9}}, +{{275},{ 9}}, {{147},{ 9}}, {{403},{ 9}}, {{ 83},{ 9}}, {{339},{ 9}}, +{{211},{ 9}}, {{467},{ 9}}, {{ 51},{ 9}}, {{307},{ 9}}, {{179},{ 9}}, +{{435},{ 9}}, {{115},{ 9}}, {{371},{ 9}}, {{243},{ 9}}, {{499},{ 9}}, +{{ 11},{ 9}}, {{267},{ 9}}, {{139},{ 9}}, {{395},{ 9}}, {{ 75},{ 9}}, +{{331},{ 9}}, {{203},{ 9}}, {{459},{ 9}}, {{ 43},{ 9}}, {{299},{ 9}}, +{{171},{ 9}}, {{427},{ 9}}, {{107},{ 9}}, {{363},{ 9}}, {{235},{ 9}}, +{{491},{ 9}}, {{ 27},{ 9}}, {{283},{ 9}}, {{155},{ 9}}, {{411},{ 9}}, +{{ 91},{ 9}}, {{347},{ 9}}, {{219},{ 9}}, {{475},{ 9}}, {{ 59},{ 9}}, +{{315},{ 9}}, {{187},{ 9}}, {{443},{ 9}}, {{123},{ 9}}, {{379},{ 9}}, +{{251},{ 9}}, {{507},{ 9}}, {{ 7},{ 9}}, {{263},{ 9}}, {{135},{ 9}}, +{{391},{ 9}}, {{ 71},{ 9}}, {{327},{ 9}}, {{199},{ 9}}, {{455},{ 9}}, +{{ 39},{ 9}}, {{295},{ 9}}, {{167},{ 9}}, {{423},{ 9}}, {{103},{ 9}}, +{{359},{ 9}}, {{231},{ 9}}, {{487},{ 9}}, {{ 23},{ 9}}, {{279},{ 9}}, +{{151},{ 9}}, {{407},{ 9}}, {{ 87},{ 9}}, {{343},{ 9}}, {{215},{ 9}}, +{{471},{ 9}}, {{ 55},{ 9}}, {{311},{ 9}}, {{183},{ 9}}, {{439},{ 9}}, +{{119},{ 9}}, {{375},{ 9}}, {{247},{ 9}}, {{503},{ 9}}, {{ 15},{ 9}}, +{{271},{ 9}}, {{143},{ 9}}, {{399},{ 9}}, {{ 79},{ 9}}, {{335},{ 9}}, +{{207},{ 9}}, {{463},{ 9}}, {{ 47},{ 9}}, {{303},{ 9}}, {{175},{ 9}}, +{{431},{ 9}}, {{111},{ 9}}, {{367},{ 9}}, {{239},{ 9}}, {{495},{ 9}}, +{{ 31},{ 9}}, {{287},{ 9}}, {{159},{ 9}}, {{415},{ 9}}, {{ 95},{ 9}}, +{{351},{ 9}}, {{223},{ 9}}, {{479},{ 9}}, {{ 63},{ 9}}, {{319},{ 9}}, +{{191},{ 9}}, {{447},{ 9}}, {{127},{ 9}}, {{383},{ 9}}, {{255},{ 9}}, +{{511},{ 9}}, {{ 0},{ 7}}, {{ 64},{ 7}}, {{ 32},{ 7}}, {{ 96},{ 7}}, +{{ 16},{ 7}}, {{ 80},{ 7}}, {{ 48},{ 7}}, {{112},{ 7}}, {{ 8},{ 7}}, +{{ 72},{ 7}}, {{ 40},{ 7}}, {{104},{ 7}}, {{ 24},{ 7}}, {{ 88},{ 7}}, +{{ 56},{ 7}}, {{120},{ 7}}, {{ 4},{ 7}}, {{ 68},{ 7}}, {{ 36},{ 7}}, +{{100},{ 7}}, {{ 20},{ 7}}, {{ 84},{ 7}}, {{ 52},{ 7}}, {{116},{ 7}}, +{{ 3},{ 8}}, {{131},{ 8}}, {{ 67},{ 8}}, {{195},{ 8}}, {{ 35},{ 8}}, +{{163},{ 8}}, {{ 99},{ 8}}, {{227},{ 8}} +}; + +local const ct_data static_dtree[D_CODES] = { +{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}}, +{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}}, +{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}}, +{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}}, +{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}}, +{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}} +}; + +const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = { + 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8, + 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10, +10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, +11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, +12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13, +13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, +13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17, +18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22, +23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29 +}; + +const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12, +13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16, +17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19, +19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, +21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22, +22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, +23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, +25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28 +}; + +local const int base_length[LENGTH_CODES] = { +0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56, +64, 80, 96, 112, 128, 160, 192, 224, 0 +}; + +local const int base_dist[D_CODES] = { + 0, 1, 2, 3, 4, 6, 8, 12, 16, 24, + 32, 48, 64, 96, 128, 192, 256, 384, 512, 768, + 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576 +}; + diff --git a/src/SDL2/external/zlib-1.2.8/uncompr.c b/src/SDL2/external/zlib-1.2.8/uncompr.c new file mode 100644 index 000000000..242e9493d --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/uncompr.c @@ -0,0 +1,59 @@ +/* uncompr.c -- decompress a memory buffer + * Copyright (C) 1995-2003, 2010 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#define ZLIB_INTERNAL +#include "zlib.h" + +/* =========================================================================== + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted. +*/ +int ZEXPORT uncompress (dest, destLen, source, sourceLen) + Bytef *dest; + uLongf *destLen; + const Bytef *source; + uLong sourceLen; +{ + z_stream stream; + int err; + + stream.next_in = (z_const Bytef *)source; + stream.avail_in = (uInt)sourceLen; + /* Check for source > 64K on 16-bit machine: */ + if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; + + stream.next_out = dest; + stream.avail_out = (uInt)*destLen; + if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; + + stream.zalloc = (alloc_func)0; + stream.zfree = (free_func)0; + + err = inflateInit(&stream); + if (err != Z_OK) return err; + + err = inflate(&stream, Z_FINISH); + if (err != Z_STREAM_END) { + inflateEnd(&stream); + if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0)) + return Z_DATA_ERROR; + return err; + } + *destLen = stream.total_out; + + err = inflateEnd(&stream); + return err; +} diff --git a/src/SDL2/external/zlib-1.2.8/watcom/watcom_f.mak b/src/SDL2/external/zlib-1.2.8/watcom/watcom_f.mak new file mode 100644 index 000000000..37f4d74c1 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/watcom/watcom_f.mak @@ -0,0 +1,43 @@ +# Makefile for zlib +# OpenWatcom flat model +# Last updated: 28-Dec-2005 + +# To use, do "wmake -f watcom_f.mak" + +C_SOURCE = adler32.c compress.c crc32.c deflate.c & + gzclose.c gzlib.c gzread.c gzwrite.c & + infback.c inffast.c inflate.c inftrees.c & + trees.c uncompr.c zutil.c + +OBJS = adler32.obj compress.obj crc32.obj deflate.obj & + gzclose.obj gzlib.obj gzread.obj gzwrite.obj & + infback.obj inffast.obj inflate.obj inftrees.obj & + trees.obj uncompr.obj zutil.obj + +CC = wcc386 +LINKER = wcl386 +CFLAGS = -zq -mf -3r -fp3 -s -bt=dos -oilrtfm -fr=nul -wx +ZLIB_LIB = zlib_f.lib + +.C.OBJ: + $(CC) $(CFLAGS) $[@ + +all: $(ZLIB_LIB) example.exe minigzip.exe + +$(ZLIB_LIB): $(OBJS) + wlib -b -c $(ZLIB_LIB) -+adler32.obj -+compress.obj -+crc32.obj + wlib -b -c $(ZLIB_LIB) -+gzclose.obj -+gzlib.obj -+gzread.obj -+gzwrite.obj + wlib -b -c $(ZLIB_LIB) -+deflate.obj -+infback.obj + wlib -b -c $(ZLIB_LIB) -+inffast.obj -+inflate.obj -+inftrees.obj + wlib -b -c $(ZLIB_LIB) -+trees.obj -+uncompr.obj -+zutil.obj + +example.exe: $(ZLIB_LIB) example.obj + $(LINKER) -ldos32a -fe=example.exe example.obj $(ZLIB_LIB) + +minigzip.exe: $(ZLIB_LIB) minigzip.obj + $(LINKER) -ldos32a -fe=minigzip.exe minigzip.obj $(ZLIB_LIB) + +clean: .SYMBOLIC + del *.obj + del $(ZLIB_LIB) + @echo Cleaning done diff --git a/src/SDL2/external/zlib-1.2.8/watcom/watcom_l.mak b/src/SDL2/external/zlib-1.2.8/watcom/watcom_l.mak new file mode 100644 index 000000000..193eed7b3 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/watcom/watcom_l.mak @@ -0,0 +1,43 @@ +# Makefile for zlib +# OpenWatcom large model +# Last updated: 28-Dec-2005 + +# To use, do "wmake -f watcom_l.mak" + +C_SOURCE = adler32.c compress.c crc32.c deflate.c & + gzclose.c gzlib.c gzread.c gzwrite.c & + infback.c inffast.c inflate.c inftrees.c & + trees.c uncompr.c zutil.c + +OBJS = adler32.obj compress.obj crc32.obj deflate.obj & + gzclose.obj gzlib.obj gzread.obj gzwrite.obj & + infback.obj inffast.obj inflate.obj inftrees.obj & + trees.obj uncompr.obj zutil.obj + +CC = wcc +LINKER = wcl +CFLAGS = -zq -ml -s -bt=dos -oilrtfm -fr=nul -wx +ZLIB_LIB = zlib_l.lib + +.C.OBJ: + $(CC) $(CFLAGS) $[@ + +all: $(ZLIB_LIB) example.exe minigzip.exe + +$(ZLIB_LIB): $(OBJS) + wlib -b -c $(ZLIB_LIB) -+adler32.obj -+compress.obj -+crc32.obj + wlib -b -c $(ZLIB_LIB) -+gzclose.obj -+gzlib.obj -+gzread.obj -+gzwrite.obj + wlib -b -c $(ZLIB_LIB) -+deflate.obj -+infback.obj + wlib -b -c $(ZLIB_LIB) -+inffast.obj -+inflate.obj -+inftrees.obj + wlib -b -c $(ZLIB_LIB) -+trees.obj -+uncompr.obj -+zutil.obj + +example.exe: $(ZLIB_LIB) example.obj + $(LINKER) -fe=example.exe example.obj $(ZLIB_LIB) + +minigzip.exe: $(ZLIB_LIB) minigzip.obj + $(LINKER) -fe=minigzip.exe minigzip.obj $(ZLIB_LIB) + +clean: .SYMBOLIC + del *.obj + del $(ZLIB_LIB) + @echo Cleaning done diff --git a/src/SDL2/external/zlib-1.2.8/win32/DLL_FAQ.txt b/src/SDL2/external/zlib-1.2.8/win32/DLL_FAQ.txt new file mode 100644 index 000000000..12c009018 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/win32/DLL_FAQ.txt @@ -0,0 +1,397 @@ + + Frequently Asked Questions about ZLIB1.DLL + + +This document describes the design, the rationale, and the usage +of the official DLL build of zlib, named ZLIB1.DLL. If you have +general questions about zlib, you should see the file "FAQ" found +in the zlib distribution, or at the following location: + http://www.gzip.org/zlib/zlib_faq.html + + + 1. What is ZLIB1.DLL, and how can I get it? + + - ZLIB1.DLL is the official build of zlib as a DLL. + (Please remark the character '1' in the name.) + + Pointers to a precompiled ZLIB1.DLL can be found in the zlib + web site at: + http://www.zlib.net/ + + Applications that link to ZLIB1.DLL can rely on the following + specification: + + * The exported symbols are exclusively defined in the source + files "zlib.h" and "zlib.def", found in an official zlib + source distribution. + * The symbols are exported by name, not by ordinal. + * The exported names are undecorated. + * The calling convention of functions is "C" (CDECL). + * The ZLIB1.DLL binary is linked to MSVCRT.DLL. + + The archive in which ZLIB1.DLL is bundled contains compiled + test programs that must run with a valid build of ZLIB1.DLL. + It is recommended to download the prebuilt DLL from the zlib + web site, instead of building it yourself, to avoid potential + incompatibilities that could be introduced by your compiler + and build settings. If you do build the DLL yourself, please + make sure that it complies with all the above requirements, + and it runs with the precompiled test programs, bundled with + the original ZLIB1.DLL distribution. + + If, for any reason, you need to build an incompatible DLL, + please use a different file name. + + + 2. Why did you change the name of the DLL to ZLIB1.DLL? + What happened to the old ZLIB.DLL? + + - The old ZLIB.DLL, built from zlib-1.1.4 or earlier, required + compilation settings that were incompatible to those used by + a static build. The DLL settings were supposed to be enabled + by defining the macro ZLIB_DLL, before including "zlib.h". + Incorrect handling of this macro was silently accepted at + build time, resulting in two major problems: + + * ZLIB_DLL was missing from the old makefile. When building + the DLL, not all people added it to the build options. In + consequence, incompatible incarnations of ZLIB.DLL started + to circulate around the net. + + * When switching from using the static library to using the + DLL, applications had to define the ZLIB_DLL macro and + to recompile all the sources that contained calls to zlib + functions. Failure to do so resulted in creating binaries + that were unable to run with the official ZLIB.DLL build. + + The only possible solution that we could foresee was to make + a binary-incompatible change in the DLL interface, in order to + remove the dependency on the ZLIB_DLL macro, and to release + the new DLL under a different name. + + We chose the name ZLIB1.DLL, where '1' indicates the major + zlib version number. We hope that we will not have to break + the binary compatibility again, at least not as long as the + zlib-1.x series will last. + + There is still a ZLIB_DLL macro, that can trigger a more + efficient build and use of the DLL, but compatibility no + longer dependents on it. + + + 3. Can I build ZLIB.DLL from the new zlib sources, and replace + an old ZLIB.DLL, that was built from zlib-1.1.4 or earlier? + + - In principle, you can do it by assigning calling convention + keywords to the macros ZEXPORT and ZEXPORTVA. In practice, + it depends on what you mean by "an old ZLIB.DLL", because the + old DLL exists in several mutually-incompatible versions. + You have to find out first what kind of calling convention is + being used in your particular ZLIB.DLL build, and to use the + same one in the new build. If you don't know what this is all + about, you might be better off if you would just leave the old + DLL intact. + + + 4. Can I compile my application using the new zlib interface, and + link it to an old ZLIB.DLL, that was built from zlib-1.1.4 or + earlier? + + - The official answer is "no"; the real answer depends again on + what kind of ZLIB.DLL you have. Even if you are lucky, this + course of action is unreliable. + + If you rebuild your application and you intend to use a newer + version of zlib (post- 1.1.4), it is strongly recommended to + link it to the new ZLIB1.DLL. + + + 5. Why are the zlib symbols exported by name, and not by ordinal? + + - Although exporting symbols by ordinal is a little faster, it + is risky. Any single glitch in the maintenance or use of the + DEF file that contains the ordinals can result in incompatible + builds and frustrating crashes. Simply put, the benefits of + exporting symbols by ordinal do not justify the risks. + + Technically, it should be possible to maintain ordinals in + the DEF file, and still export the symbols by name. Ordinals + exist in every DLL, and even if the dynamic linking performed + at the DLL startup is searching for names, ordinals serve as + hints, for a faster name lookup. However, if the DEF file + contains ordinals, the Microsoft linker automatically builds + an implib that will cause the executables linked to it to use + those ordinals, and not the names. It is interesting to + notice that the GNU linker for Win32 does not suffer from this + problem. + + It is possible to avoid the DEF file if the exported symbols + are accompanied by a "__declspec(dllexport)" attribute in the + source files. You can do this in zlib by predefining the + ZLIB_DLL macro. + + + 6. I see that the ZLIB1.DLL functions use the "C" (CDECL) calling + convention. Why not use the STDCALL convention? + STDCALL is the standard convention in Win32, and I need it in + my Visual Basic project! + + (For readability, we use CDECL to refer to the convention + triggered by the "__cdecl" keyword, STDCALL to refer to + the convention triggered by "__stdcall", and FASTCALL to + refer to the convention triggered by "__fastcall".) + + - Most of the native Windows API functions (without varargs) use + indeed the WINAPI convention (which translates to STDCALL in + Win32), but the standard C functions use CDECL. If a user + application is intrinsically tied to the Windows API (e.g. + it calls native Windows API functions such as CreateFile()), + sometimes it makes sense to decorate its own functions with + WINAPI. But if ANSI C or POSIX portability is a goal (e.g. + it calls standard C functions such as fopen()), it is not a + sound decision to request the inclusion of , or to + use non-ANSI constructs, for the sole purpose to make the user + functions STDCALL-able. + + The functionality offered by zlib is not in the category of + "Windows functionality", but is more like "C functionality". + + Technically, STDCALL is not bad; in fact, it is slightly + faster than CDECL, and it works with variable-argument + functions, just like CDECL. It is unfortunate that, in spite + of using STDCALL in the Windows API, it is not the default + convention used by the C compilers that run under Windows. + The roots of the problem reside deep inside the unsafety of + the K&R-style function prototypes, where the argument types + are not specified; but that is another story for another day. + + The remaining fact is that CDECL is the default convention. + Even if an explicit convention is hard-coded into the function + prototypes inside C headers, problems may appear. The + necessity to expose the convention in users' callbacks is one + of these problems. + + The calling convention issues are also important when using + zlib in other programming languages. Some of them, like Ada + (GNAT) and Fortran (GNU G77), have C bindings implemented + initially on Unix, and relying on the C calling convention. + On the other hand, the pre- .NET versions of Microsoft Visual + Basic require STDCALL, while Borland Delphi prefers, although + it does not require, FASTCALL. + + In fairness to all possible uses of zlib outside the C + programming language, we choose the default "C" convention. + Anyone interested in different bindings or conventions is + encouraged to maintain specialized projects. The "contrib/" + directory from the zlib distribution already holds a couple + of foreign bindings, such as Ada, C++, and Delphi. + + + 7. I need a DLL for my Visual Basic project. What can I do? + + - Define the ZLIB_WINAPI macro before including "zlib.h", when + building both the DLL and the user application (except that + you don't need to define anything when using the DLL in Visual + Basic). The ZLIB_WINAPI macro will switch on the WINAPI + (STDCALL) convention. The name of this DLL must be different + than the official ZLIB1.DLL. + + Gilles Vollant has contributed a build named ZLIBWAPI.DLL, + with the ZLIB_WINAPI macro turned on, and with the minizip + functionality built in. For more information, please read + the notes inside "contrib/vstudio/readme.txt", found in the + zlib distribution. + + + 8. I need to use zlib in my Microsoft .NET project. What can I + do? + + - Henrik Ravn has contributed a .NET wrapper around zlib. Look + into contrib/dotzlib/, inside the zlib distribution. + + + 9. If my application uses ZLIB1.DLL, should I link it to + MSVCRT.DLL? Why? + + - It is not required, but it is recommended to link your + application to MSVCRT.DLL, if it uses ZLIB1.DLL. + + The executables (.EXE, .DLL, etc.) that are involved in the + same process and are using the C run-time library (i.e. they + are calling standard C functions), must link to the same + library. There are several libraries in the Win32 system: + CRTDLL.DLL, MSVCRT.DLL, the static C libraries, etc. + Since ZLIB1.DLL is linked to MSVCRT.DLL, the executables that + depend on it should also be linked to MSVCRT.DLL. + + +10. Why are you saying that ZLIB1.DLL and my application should + be linked to the same C run-time (CRT) library? I linked my + application and my DLLs to different C libraries (e.g. my + application to a static library, and my DLLs to MSVCRT.DLL), + and everything works fine. + + - If a user library invokes only pure Win32 API (accessible via + and the related headers), its DLL build will work + in any context. But if this library invokes standard C API, + things get more complicated. + + There is a single Win32 library in a Win32 system. Every + function in this library resides in a single DLL module, that + is safe to call from anywhere. On the other hand, there are + multiple versions of the C library, and each of them has its + own separate internal state. Standalone executables and user + DLLs that call standard C functions must link to a C run-time + (CRT) library, be it static or shared (DLL). Intermixing + occurs when an executable (not necessarily standalone) and a + DLL are linked to different CRTs, and both are running in the + same process. + + Intermixing multiple CRTs is possible, as long as their + internal states are kept intact. The Microsoft Knowledge Base + articles KB94248 "HOWTO: Use the C Run-Time" and KB140584 + "HOWTO: Link with the Correct C Run-Time (CRT) Library" + mention the potential problems raised by intermixing. + + If intermixing works for you, it's because your application + and DLLs are avoiding the corruption of each of the CRTs' + internal states, maybe by careful design, or maybe by fortune. + + Also note that linking ZLIB1.DLL to non-Microsoft CRTs, such + as those provided by Borland, raises similar problems. + + +11. Why are you linking ZLIB1.DLL to MSVCRT.DLL? + + - MSVCRT.DLL exists on every Windows 95 with a new service pack + installed, or with Microsoft Internet Explorer 4 or later, and + on all other Windows 4.x or later (Windows 98, Windows NT 4, + or later). It is freely distributable; if not present in the + system, it can be downloaded from Microsoft or from other + software provider for free. + + The fact that MSVCRT.DLL does not exist on a virgin Windows 95 + is not so problematic. Windows 95 is scarcely found nowadays, + Microsoft ended its support a long time ago, and many recent + applications from various vendors, including Microsoft, do not + even run on it. Furthermore, no serious user should run + Windows 95 without a proper update installed. + + +12. Why are you not linking ZLIB1.DLL to + <> ? + + - We considered and abandoned the following alternatives: + + * Linking ZLIB1.DLL to a static C library (LIBC.LIB, or + LIBCMT.LIB) is not a good option. People are using the DLL + mainly to save disk space. If you are linking your program + to a static C library, you may as well consider linking zlib + in statically, too. + + * Linking ZLIB1.DLL to CRTDLL.DLL looks appealing, because + CRTDLL.DLL is present on every Win32 installation. + Unfortunately, it has a series of problems: it does not + work properly with Microsoft's C++ libraries, it does not + provide support for 64-bit file offsets, (and so on...), + and Microsoft discontinued its support a long time ago. + + * Linking ZLIB1.DLL to MSVCR70.DLL or MSVCR71.DLL, supplied + with the Microsoft .NET platform, and Visual C++ 7.0/7.1, + raises problems related to the status of ZLIB1.DLL as a + system component. According to the Microsoft Knowledge Base + article KB326922 "INFO: Redistribution of the Shared C + Runtime Component in Visual C++ .NET", MSVCR70.DLL and + MSVCR71.DLL are not supposed to function as system DLLs, + because they may clash with MSVCRT.DLL. Instead, the + application's installer is supposed to put these DLLs + (if needed) in the application's private directory. + If ZLIB1.DLL depends on a non-system runtime, it cannot + function as a redistributable system component. + + * Linking ZLIB1.DLL to non-Microsoft runtimes, such as + Borland's, or Cygwin's, raises problems related to the + reliable presence of these runtimes on Win32 systems. + It's easier to let the DLL build of zlib up to the people + who distribute these runtimes, and who may proceed as + explained in the answer to Question 14. + + +13. If ZLIB1.DLL cannot be linked to MSVCR70.DLL or MSVCR71.DLL, + how can I build/use ZLIB1.DLL in Microsoft Visual C++ 7.0 + (Visual Studio .NET) or newer? + + - Due to the problems explained in the Microsoft Knowledge Base + article KB326922 (see the previous answer), the C runtime that + comes with the VC7 environment is no longer considered a + system component. That is, it should not be assumed that this + runtime exists, or may be installed in a system directory. + Since ZLIB1.DLL is supposed to be a system component, it may + not depend on a non-system component. + + In order to link ZLIB1.DLL and your application to MSVCRT.DLL + in VC7, you need the library of Visual C++ 6.0 or older. If + you don't have this library at hand, it's probably best not to + use ZLIB1.DLL. + + We are hoping that, in the future, Microsoft will provide a + way to build applications linked to a proper system runtime, + from the Visual C++ environment. Until then, you have a + couple of alternatives, such as linking zlib in statically. + If your application requires dynamic linking, you may proceed + as explained in the answer to Question 14. + + +14. I need to link my own DLL build to a CRT different than + MSVCRT.DLL. What can I do? + + - Feel free to rebuild the DLL from the zlib sources, and link + it the way you want. You should, however, clearly state that + your build is unofficial. You should give it a different file + name, and/or install it in a private directory that can be + accessed by your application only, and is not visible to the + others (i.e. it's neither in the PATH, nor in the SYSTEM or + SYSTEM32 directories). Otherwise, your build may clash with + applications that link to the official build. + + For example, in Cygwin, zlib is linked to the Cygwin runtime + CYGWIN1.DLL, and it is distributed under the name CYGZ.DLL. + + +15. May I include additional pieces of code that I find useful, + link them in ZLIB1.DLL, and export them? + + - No. A legitimate build of ZLIB1.DLL must not include code + that does not originate from the official zlib source code. + But you can make your own private DLL build, under a different + file name, as suggested in the previous answer. + + For example, zlib is a part of the VCL library, distributed + with Borland Delphi and C++ Builder. The DLL build of VCL + is a redistributable file, named VCLxx.DLL. + + +16. May I remove some functionality out of ZLIB1.DLL, by enabling + macros like NO_GZCOMPRESS or NO_GZIP at compile time? + + - No. A legitimate build of ZLIB1.DLL must provide the complete + zlib functionality, as implemented in the official zlib source + code. But you can make your own private DLL build, under a + different file name, as suggested in the previous answer. + + +17. I made my own ZLIB1.DLL build. Can I test it for compliance? + + - We prefer that you download the official DLL from the zlib + web site. If you need something peculiar from this DLL, you + can send your suggestion to the zlib mailing list. + + However, in case you do rebuild the DLL yourself, you can run + it with the test programs found in the DLL distribution. + Running these test programs is not a guarantee of compliance, + but a failure can imply a detected problem. + +** + +This document is written and maintained by +Cosmin Truta diff --git a/src/SDL2/external/zlib-1.2.8/win32/Makefile.bor b/src/SDL2/external/zlib-1.2.8/win32/Makefile.bor new file mode 100644 index 000000000..d152bbb7f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/win32/Makefile.bor @@ -0,0 +1,110 @@ +# Makefile for zlib +# Borland C++ for Win32 +# +# Usage: +# make -f win32/Makefile.bor +# make -f win32/Makefile.bor LOCAL_ZLIB=-DASMV OBJA=match.obj OBJPA=+match.obj + +# ------------ Borland C++ ------------ + +# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7) +# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or +# added to the declaration of LOC here: +LOC = $(LOCAL_ZLIB) + +CC = bcc32 +AS = bcc32 +LD = bcc32 +AR = tlib +CFLAGS = -a -d -k- -O2 $(LOC) +ASFLAGS = $(LOC) +LDFLAGS = $(LOC) + + +# variables +ZLIB_LIB = zlib.lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +#OBJA = +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj +OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj +#OBJPA= + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $< + +.asm.obj: + $(AS) -c $(ASFLAGS) $< + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + +minigzip.obj: test/minigzip.c zlib.h zconf.h + + +# For the sake of the old Borland make, +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) $(OBJA) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + $(AR) $(ZLIB_LIB) $(OBJPA) + + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + + +# cleanup +clean: + -del $(ZLIB_LIB) + -del *.obj + -del *.exe + -del *.tds + -del zlib.bak + -del foo.gz diff --git a/src/SDL2/external/zlib-1.2.8/win32/Makefile.gcc b/src/SDL2/external/zlib-1.2.8/win32/Makefile.gcc new file mode 100644 index 000000000..6d1ded622 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/win32/Makefile.gcc @@ -0,0 +1,182 @@ +# Makefile for zlib, derived from Makefile.dj2. +# Modified for mingw32 by C. Spieler, 6/16/98. +# Updated for zlib 1.2.x by Christian Spieler and Cosmin Truta, Mar-2003. +# Last updated: Mar 2012. +# Tested under Cygwin and MinGW. + +# Copyright (C) 1995-2003 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type from the top level zlib directory: +# +# make -fwin32/Makefile.gcc; make test testdll -fwin32/Makefile.gcc +# +# To use the asm code, type: +# cp contrib/asm?86/match.S ./match.S +# make LOC=-DASMV OBJA=match.o -fwin32/Makefile.gcc +# +# To install libz.a, zconf.h and zlib.h in the system directories, type: +# +# make install -fwin32/Makefile.gcc +# +# BINARY_PATH, INCLUDE_PATH and LIBRARY_PATH must be set. +# +# To install the shared lib, append SHARED_MODE=1 to the make command : +# +# make install -fwin32/Makefile.gcc SHARED_MODE=1 + +# Note: +# If the platform is *not* MinGW (e.g. it is Cygwin or UWIN), +# the DLL name should be changed from "zlib1.dll". + +STATICLIB = libz.a +SHAREDLIB = zlib1.dll +IMPLIB = libz.dll.a + +# +# Set to 1 if shared object needs to be installed +# +SHARED_MODE=0 + +#LOC = -DASMV +#LOC = -DDEBUG -g + +PREFIX = +CC = $(PREFIX)gcc +CFLAGS = $(LOC) -O3 -Wall + +AS = $(CC) +ASFLAGS = $(LOC) -Wall + +LD = $(CC) +LDFLAGS = $(LOC) + +AR = $(PREFIX)ar +ARFLAGS = rcs + +RC = $(PREFIX)windres +RCFLAGS = --define GCC_WINDRES + +STRIP = $(PREFIX)strip + +CP = cp -fp +# If GNU install is available, replace $(CP) with install. +INSTALL = $(CP) +RM = rm -f + +prefix ?= /usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \ + gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o +OBJA = + +all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB) example.exe minigzip.exe example_d.exe minigzip_d.exe + +test: example.exe minigzip.exe + ./example + echo hello world | ./minigzip | ./minigzip -d + +testdll: example_d.exe minigzip_d.exe + ./example_d + echo hello world | ./minigzip_d | ./minigzip_d -d + +.c.o: + $(CC) $(CFLAGS) -c -o $@ $< + +.S.o: + $(AS) $(ASFLAGS) -c -o $@ $< + +$(STATICLIB): $(OBJS) $(OBJA) + $(AR) $(ARFLAGS) $@ $(OBJS) $(OBJA) + +$(IMPLIB): $(SHAREDLIB) + +$(SHAREDLIB): win32/zlib.def $(OBJS) $(OBJA) zlibrc.o + $(CC) -shared -Wl,--out-implib,$(IMPLIB) $(LDFLAGS) \ + -o $@ win32/zlib.def $(OBJS) $(OBJA) zlibrc.o + $(STRIP) $@ + +example.exe: example.o $(STATICLIB) + $(LD) $(LDFLAGS) -o $@ example.o $(STATICLIB) + $(STRIP) $@ + +minigzip.exe: minigzip.o $(STATICLIB) + $(LD) $(LDFLAGS) -o $@ minigzip.o $(STATICLIB) + $(STRIP) $@ + +example_d.exe: example.o $(IMPLIB) + $(LD) $(LDFLAGS) -o $@ example.o $(IMPLIB) + $(STRIP) $@ + +minigzip_d.exe: minigzip.o $(IMPLIB) + $(LD) $(LDFLAGS) -o $@ minigzip.o $(IMPLIB) + $(STRIP) $@ + +example.o: test/example.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -c -o $@ test/example.c + +minigzip.o: test/minigzip.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -c -o $@ test/minigzip.c + +zlibrc.o: win32/zlib1.rc + $(RC) $(RCFLAGS) -o $@ win32/zlib1.rc + +.PHONY: install uninstall clean + +install: zlib.h zconf.h $(STATICLIB) $(IMPLIB) + @if test -z "$(DESTDIR)$(INCLUDE_PATH)" -o -z "$(DESTDIR)$(LIBRARY_PATH)" -o -z "$(DESTDIR)$(BINARY_PATH)"; then \ + echo INCLUDE_PATH, LIBRARY_PATH, and BINARY_PATH must be specified; \ + exit 1; \ + fi + -@mkdir -p '$(DESTDIR)$(INCLUDE_PATH)' + -@mkdir -p '$(DESTDIR)$(LIBRARY_PATH)' '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig + -if [ "$(SHARED_MODE)" = "1" ]; then \ + mkdir -p '$(DESTDIR)$(BINARY_PATH)'; \ + $(INSTALL) $(SHAREDLIB) '$(DESTDIR)$(BINARY_PATH)'; \ + $(INSTALL) $(IMPLIB) '$(DESTDIR)$(LIBRARY_PATH)'; \ + fi + -$(INSTALL) zlib.h '$(DESTDIR)$(INCLUDE_PATH)' + -$(INSTALL) zconf.h '$(DESTDIR)$(INCLUDE_PATH)' + -$(INSTALL) $(STATICLIB) '$(DESTDIR)$(LIBRARY_PATH)' + sed \ + -e 's|@prefix@|${prefix}|g' \ + -e 's|@exec_prefix@|${exec_prefix}|g' \ + -e 's|@libdir@|$(LIBRARY_PATH)|g' \ + -e 's|@sharedlibdir@|$(LIBRARY_PATH)|g' \ + -e 's|@includedir@|$(INCLUDE_PATH)|g' \ + -e 's|@VERSION@|'`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' zlib.h`'|g' \ + zlib.pc.in > '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig/zlib.pc + +uninstall: + -if [ "$(SHARED_MODE)" = "1" ]; then \ + $(RM) '$(DESTDIR)$(BINARY_PATH)'/$(SHAREDLIB); \ + $(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(IMPLIB); \ + fi + -$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zlib.h + -$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zconf.h + -$(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(STATICLIB) + +clean: + -$(RM) $(STATICLIB) + -$(RM) $(SHAREDLIB) + -$(RM) $(IMPLIB) + -$(RM) *.o + -$(RM) *.exe + -$(RM) foo.gz + +adler32.o: zlib.h zconf.h +compress.o: zlib.h zconf.h +crc32.o: crc32.h zlib.h zconf.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +gzclose.o: zlib.h zconf.h gzguts.h +gzlib.o: zlib.h zconf.h gzguts.h +gzread.o: zlib.h zconf.h gzguts.h +gzwrite.o: zlib.h zconf.h gzguts.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h +uncompr.o: zlib.h zconf.h +zutil.o: zutil.h zlib.h zconf.h diff --git a/src/SDL2/external/zlib-1.2.8/win32/Makefile.msc b/src/SDL2/external/zlib-1.2.8/win32/Makefile.msc new file mode 100644 index 000000000..67b773171 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/win32/Makefile.msc @@ -0,0 +1,163 @@ +# Makefile for zlib using Microsoft (Visual) C +# zlib is copyright (C) 1995-2006 Jean-loup Gailly and Mark Adler +# +# Usage: +# nmake -f win32/Makefile.msc (standard build) +# nmake -f win32/Makefile.msc LOC=-DFOO (nonstandard build) +# nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" \ +# OBJA="inffas32.obj match686.obj" (use ASM code, x86) +# nmake -f win32/Makefile.msc AS=ml64 LOC="-DASMV -DASMINF -I." \ +# OBJA="inffasx64.obj gvmat64.obj inffas8664.obj" (use ASM code, x64) + +# The toplevel directory of the source tree. +# +TOP = . + +# optional build flags +LOC = + +# variables +STATICLIB = zlib.lib +SHAREDLIB = zlib1.dll +IMPLIB = zdll.lib + +CC = cl +AS = ml +LD = link +AR = lib +RC = rc +CFLAGS = -nologo -MD -W3 -O2 -Oy- -Zi -Fd"zlib" $(LOC) +WFLAGS = -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE +ASFLAGS = -coff -Zi $(LOC) +LDFLAGS = -nologo -debug -incremental:no -opt:ref +ARFLAGS = -nologo +RCFLAGS = /dWIN32 /r + +OBJS = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj \ + gzwrite.obj infback.obj inflate.obj inftrees.obj inffast.obj trees.obj uncompr.obj zutil.obj +OBJA = + + +# targets +all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB) \ + example.exe minigzip.exe example_d.exe minigzip_d.exe + +$(STATICLIB): $(OBJS) $(OBJA) + $(AR) $(ARFLAGS) -out:$@ $(OBJS) $(OBJA) + +$(IMPLIB): $(SHAREDLIB) + +$(SHAREDLIB): $(TOP)/win32/zlib.def $(OBJS) $(OBJA) zlib1.res + $(LD) $(LDFLAGS) -def:$(TOP)/win32/zlib.def -dll -implib:$(IMPLIB) \ + -out:$@ -base:0x5A4C0000 $(OBJS) $(OBJA) zlib1.res + if exist $@.manifest \ + mt -nologo -manifest $@.manifest -outputresource:$@;2 + +example.exe: example.obj $(STATICLIB) + $(LD) $(LDFLAGS) example.obj $(STATICLIB) + if exist $@.manifest \ + mt -nologo -manifest $@.manifest -outputresource:$@;1 + +minigzip.exe: minigzip.obj $(STATICLIB) + $(LD) $(LDFLAGS) minigzip.obj $(STATICLIB) + if exist $@.manifest \ + mt -nologo -manifest $@.manifest -outputresource:$@;1 + +example_d.exe: example.obj $(IMPLIB) + $(LD) $(LDFLAGS) -out:$@ example.obj $(IMPLIB) + if exist $@.manifest \ + mt -nologo -manifest $@.manifest -outputresource:$@;1 + +minigzip_d.exe: minigzip.obj $(IMPLIB) + $(LD) $(LDFLAGS) -out:$@ minigzip.obj $(IMPLIB) + if exist $@.manifest \ + mt -nologo -manifest $@.manifest -outputresource:$@;1 + +{$(TOP)}.c.obj: + $(CC) -c $(WFLAGS) $(CFLAGS) $< + +{$(TOP)/test}.c.obj: + $(CC) -c -I$(TOP) $(WFLAGS) $(CFLAGS) $< + +{$(TOP)/contrib/masmx64}.c.obj: + $(CC) -c $(WFLAGS) $(CFLAGS) $< + +{$(TOP)/contrib/masmx64}.asm.obj: + $(AS) -c $(ASFLAGS) $< + +{$(TOP)/contrib/masmx86}.asm.obj: + $(AS) -c $(ASFLAGS) $< + +adler32.obj: $(TOP)/adler32.c $(TOP)/zlib.h $(TOP)/zconf.h + +compress.obj: $(TOP)/compress.c $(TOP)/zlib.h $(TOP)/zconf.h + +crc32.obj: $(TOP)/crc32.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/crc32.h + +deflate.obj: $(TOP)/deflate.c $(TOP)/deflate.h $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h + +gzclose.obj: $(TOP)/gzclose.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h + +gzlib.obj: $(TOP)/gzlib.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h + +gzread.obj: $(TOP)/gzread.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h + +gzwrite.obj: $(TOP)/gzwrite.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h + +infback.obj: $(TOP)/infback.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \ + $(TOP)/inffast.h $(TOP)/inffixed.h + +inffast.obj: $(TOP)/inffast.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \ + $(TOP)/inffast.h + +inflate.obj: $(TOP)/inflate.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \ + $(TOP)/inffast.h $(TOP)/inffixed.h + +inftrees.obj: $(TOP)/inftrees.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h + +trees.obj: $(TOP)/trees.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/deflate.h $(TOP)/trees.h + +uncompr.obj: $(TOP)/uncompr.c $(TOP)/zlib.h $(TOP)/zconf.h + +zutil.obj: $(TOP)/zutil.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h + +gvmat64.obj: $(TOP)/contrib\masmx64\gvmat64.asm + +inffasx64.obj: $(TOP)/contrib\masmx64\inffasx64.asm + +inffas8664.obj: $(TOP)/contrib\masmx64\inffas8664.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h \ + $(TOP)/inftrees.h $(TOP)/inflate.h $(TOP)/inffast.h + +inffas32.obj: $(TOP)/contrib\masmx86\inffas32.asm + +match686.obj: $(TOP)/contrib\masmx86\match686.asm + +example.obj: $(TOP)/test/example.c $(TOP)/zlib.h $(TOP)/zconf.h + +minigzip.obj: $(TOP)/test/minigzip.c $(TOP)/zlib.h $(TOP)/zconf.h + +zlib1.res: $(TOP)/win32/zlib1.rc + $(RC) $(RCFLAGS) /fo$@ $(TOP)/win32/zlib1.rc + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +testdll: example_d.exe minigzip_d.exe + example_d + echo hello world | minigzip_d | minigzip_d -d + + +# cleanup +clean: + -del $(STATICLIB) + -del $(SHAREDLIB) + -del $(IMPLIB) + -del *.obj + -del *.res + -del *.exp + -del *.exe + -del *.pdb + -del *.manifest + -del foo.gz diff --git a/src/SDL2/external/zlib-1.2.8/win32/README-WIN32.txt b/src/SDL2/external/zlib-1.2.8/win32/README-WIN32.txt new file mode 100644 index 000000000..3d77d521e --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/win32/README-WIN32.txt @@ -0,0 +1,103 @@ +ZLIB DATA COMPRESSION LIBRARY + +zlib 1.2.8 is a general purpose data compression library. All the code is +thread safe. The data format used by the zlib library is described by RFCs +(Request for Comments) 1950 to 1952 in the files +http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format) +and rfc1952.txt (gzip format). + +All functions of the compression library are documented in the file zlib.h +(volunteer to write man pages welcome, contact zlib@gzip.org). Two compiled +examples are distributed in this package, example and minigzip. The example_d +and minigzip_d flavors validate that the zlib1.dll file is working correctly. + +Questions about zlib should be sent to . The zlib home page +is http://zlib.net/ . Before reporting a problem, please check this site to +verify that you have the latest version of zlib; otherwise get the latest +version and check whether the problem still exists or not. + +PLEASE read DLL_FAQ.txt, and the the zlib FAQ http://zlib.net/zlib_faq.html +before asking for help. + + +Manifest: + +The package zlib-1.2.8-win32-x86.zip will contain the following files: + + README-WIN32.txt This document + ChangeLog Changes since previous zlib packages + DLL_FAQ.txt Frequently asked questions about zlib1.dll + zlib.3.pdf Documentation of this library in Adobe Acrobat format + + example.exe A statically-bound example (using zlib.lib, not the dll) + example.pdb Symbolic information for debugging example.exe + + example_d.exe A zlib1.dll bound example (using zdll.lib) + example_d.pdb Symbolic information for debugging example_d.exe + + minigzip.exe A statically-bound test program (using zlib.lib, not the dll) + minigzip.pdb Symbolic information for debugging minigzip.exe + + minigzip_d.exe A zlib1.dll bound test program (using zdll.lib) + minigzip_d.pdb Symbolic information for debugging minigzip_d.exe + + zlib.h Install these files into the compilers' INCLUDE path to + zconf.h compile programs which use zlib.lib or zdll.lib + + zdll.lib Install these files into the compilers' LIB path if linking + zdll.exp a compiled program to the zlib1.dll binary + + zlib.lib Install these files into the compilers' LIB path to link zlib + zlib.pdb into compiled programs, without zlib1.dll runtime dependency + (zlib.pdb provides debugging info to the compile time linker) + + zlib1.dll Install this binary shared library into the system PATH, or + the program's runtime directory (where the .exe resides) + zlib1.pdb Install in the same directory as zlib1.dll, in order to debug + an application crash using WinDbg or similar tools. + +All .pdb files above are entirely optional, but are very useful to a developer +attempting to diagnose program misbehavior or a crash. Many additional +important files for developers can be found in the zlib127.zip source package +available from http://zlib.net/ - review that package's README file for details. + + +Acknowledgments: + +The deflate format used by zlib was defined by Phil Katz. The deflate and +zlib specifications were written by L. Peter Deutsch. Thanks to all the +people who reported problems and suggested various improvements in zlib; they +are too numerous to cite here. + + +Copyright notice: + + (C) 1995-2012 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + +If you use the zlib library in a product, we would appreciate *not* receiving +lengthy legal documents to sign. The sources are provided for free but without +warranty of any kind. The library has been entirely written by Jean-loup +Gailly and Mark Adler; it does not include third-party code. + +If you redistribute modified sources, we would appreciate that you include in +the file ChangeLog history information documenting your changes. Please read +the FAQ for more information on the distribution of modified source versions. diff --git a/src/SDL2/external/zlib-1.2.8/win32/VisualC.txt b/src/SDL2/external/zlib-1.2.8/win32/VisualC.txt new file mode 100644 index 000000000..579a5fc9e --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/win32/VisualC.txt @@ -0,0 +1,3 @@ + +To build zlib using the Microsoft Visual C++ environment, +use the appropriate project from the projects/ directory. diff --git a/src/SDL2/external/zlib-1.2.8/win32/zlib.def b/src/SDL2/external/zlib-1.2.8/win32/zlib.def new file mode 100644 index 000000000..face65518 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/win32/zlib.def @@ -0,0 +1,86 @@ +; zlib data compression library +EXPORTS +; basic functions + zlibVersion + deflate + deflateEnd + inflate + inflateEnd +; advanced functions + deflateSetDictionary + deflateCopy + deflateReset + deflateParams + deflateTune + deflateBound + deflatePending + deflatePrime + deflateSetHeader + inflateSetDictionary + inflateGetDictionary + inflateSync + inflateCopy + inflateReset + inflateReset2 + inflatePrime + inflateMark + inflateGetHeader + inflateBack + inflateBackEnd + zlibCompileFlags +; utility functions + compress + compress2 + compressBound + uncompress + gzopen + gzdopen + gzbuffer + gzsetparams + gzread + gzwrite + gzprintf + gzvprintf + gzputs + gzgets + gzputc + gzgetc + gzungetc + gzflush + gzseek + gzrewind + gztell + gzoffset + gzeof + gzdirect + gzclose + gzclose_r + gzclose_w + gzerror + gzclearerr +; large file functions + gzopen64 + gzseek64 + gztell64 + gzoffset64 + adler32_combine64 + crc32_combine64 +; checksum functions + adler32 + crc32 + adler32_combine + crc32_combine +; various hacks, don't look :) + deflateInit_ + deflateInit2_ + inflateInit_ + inflateInit2_ + inflateBackInit_ + gzgetc_ + zError + inflateSyncPoint + get_crc_table + inflateUndermine + inflateResetKeep + deflateResetKeep + gzopen_w diff --git a/src/SDL2/external/zlib-1.2.8/win32/zlib1.rc b/src/SDL2/external/zlib-1.2.8/win32/zlib1.rc new file mode 100644 index 000000000..5c0feed1b --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/win32/zlib1.rc @@ -0,0 +1,40 @@ +#include +#include "../zlib.h" + +#ifdef GCC_WINDRES +VS_VERSION_INFO VERSIONINFO +#else +VS_VERSION_INFO VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE +#endif + FILEVERSION ZLIB_VER_MAJOR,ZLIB_VER_MINOR,ZLIB_VER_REVISION,0 + PRODUCTVERSION ZLIB_VER_MAJOR,ZLIB_VER_MINOR,ZLIB_VER_REVISION,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK +#ifdef _DEBUG + FILEFLAGS 1 +#else + FILEFLAGS 0 +#endif + FILEOS VOS__WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + BEGIN + VALUE "FileDescription", "zlib data compression library\0" + VALUE "FileVersion", ZLIB_VERSION "\0" + VALUE "InternalName", "zlib1.dll\0" + VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0" + VALUE "OriginalFilename", "zlib1.dll\0" + VALUE "ProductName", "zlib\0" + VALUE "ProductVersion", ZLIB_VERSION "\0" + VALUE "Comments", "For more information visit http://www.zlib.net/\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/src/SDL2/external/zlib-1.2.8/zconf.h b/src/SDL2/external/zlib-1.2.8/zconf.h new file mode 100644 index 000000000..9987a7755 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/zconf.h @@ -0,0 +1,511 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2013 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzvprintf z_gzvprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetHeader z_inflateGetHeader +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateSetDictionary z_inflateSetDictionary +# define inflateGetDictionary z_inflateGetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateResetKeep z_inflateResetKeep +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +#ifndef Z_ARG /* function prototypes for stdarg */ +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/src/SDL2/external/zlib-1.2.8/zconf.h.cmakein b/src/SDL2/external/zlib-1.2.8/zconf.h.cmakein new file mode 100644 index 000000000..043019cda --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/zconf.h.cmakein @@ -0,0 +1,513 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2013 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H +#cmakedefine Z_PREFIX +#cmakedefine Z_HAVE_UNISTD_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzvprintf z_gzvprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetHeader z_inflateGetHeader +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateSetDictionary z_inflateSetDictionary +# define inflateGetDictionary z_inflateGetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateResetKeep z_inflateResetKeep +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +#ifndef Z_ARG /* function prototypes for stdarg */ +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/src/SDL2/external/zlib-1.2.8/zconf.h.in b/src/SDL2/external/zlib-1.2.8/zconf.h.in new file mode 100644 index 000000000..9987a7755 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/zconf.h.in @@ -0,0 +1,511 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2013 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzvprintf z_gzvprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetHeader z_inflateGetHeader +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateSetDictionary z_inflateSetDictionary +# define inflateGetDictionary z_inflateGetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateResetKeep z_inflateResetKeep +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +#ifndef Z_ARG /* function prototypes for stdarg */ +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/src/SDL2/external/zlib-1.2.8/zlib.3 b/src/SDL2/external/zlib-1.2.8/zlib.3 new file mode 100644 index 000000000..0160e62b6 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/zlib.3 @@ -0,0 +1,151 @@ +.TH ZLIB 3 "28 Apr 2013" +.SH NAME +zlib \- compression/decompression library +.SH SYNOPSIS +[see +.I zlib.h +for full description] +.SH DESCRIPTION +The +.I zlib +library is a general purpose data compression library. +The code is thread safe, assuming that the standard library functions +used are thread safe, such as memory allocation routines. +It provides in-memory compression and decompression functions, +including integrity checks of the uncompressed data. +This version of the library supports only one compression method (deflation) +but other algorithms may be added later +with the same stream interface. +.LP +Compression can be done in a single step if the buffers are large enough +or can be done by repeated calls of the compression function. +In the latter case, +the application must provide more input and/or consume the output +(providing more output space) before each call. +.LP +The library also supports reading and writing files in +.IR gzip (1) +(.gz) format +with an interface similar to that of stdio. +.LP +The library does not install any signal handler. +The decoder checks the consistency of the compressed data, +so the library should never crash even in the case of corrupted input. +.LP +All functions of the compression library are documented in the file +.IR zlib.h . +The distribution source includes examples of use of the library +in the files +.I test/example.c +and +.IR test/minigzip.c, +as well as other examples in the +.IR examples/ +directory. +.LP +Changes to this version are documented in the file +.I ChangeLog +that accompanies the source. +.LP +.I zlib +is available in Java using the java.util.zip package: +.IP +http://java.sun.com/developer/technicalArticles/Programming/compression/ +.LP +A Perl interface to +.IR zlib , +written by Paul Marquess (pmqs@cpan.org), +is available at CPAN (Comprehensive Perl Archive Network) sites, +including: +.IP +http://search.cpan.org/~pmqs/IO-Compress-Zlib/ +.LP +A Python interface to +.IR zlib , +written by A.M. Kuchling (amk@magnet.com), +is available in Python 1.5 and later versions: +.IP +http://docs.python.org/library/zlib.html +.LP +.I zlib +is built into +.IR tcl: +.IP +http://wiki.tcl.tk/4610 +.LP +An experimental package to read and write files in .zip format, +written on top of +.I zlib +by Gilles Vollant (info@winimage.com), +is available at: +.IP +http://www.winimage.com/zLibDll/minizip.html +and also in the +.I contrib/minizip +directory of the main +.I zlib +source distribution. +.SH "SEE ALSO" +The +.I zlib +web site can be found at: +.IP +http://zlib.net/ +.LP +The data format used by the zlib library is described by RFC +(Request for Comments) 1950 to 1952 in the files: +.IP +http://tools.ietf.org/html/rfc1950 (for the zlib header and trailer format) +.br +http://tools.ietf.org/html/rfc1951 (for the deflate compressed data format) +.br +http://tools.ietf.org/html/rfc1952 (for the gzip header and trailer format) +.LP +Mark Nelson wrote an article about +.I zlib +for the Jan. 1997 issue of Dr. Dobb's Journal; +a copy of the article is available at: +.IP +http://marknelson.us/1997/01/01/zlib-engine/ +.SH "REPORTING PROBLEMS" +Before reporting a problem, +please check the +.I zlib +web site to verify that you have the latest version of +.IR zlib ; +otherwise, +obtain the latest version and see if the problem still exists. +Please read the +.I zlib +FAQ at: +.IP +http://zlib.net/zlib_faq.html +.LP +before asking for help. +Send questions and/or comments to zlib@gzip.org, +or (for the Windows DLL version) to Gilles Vollant (info@winimage.com). +.SH AUTHORS +Version 1.2.8 +Copyright (C) 1995-2013 Jean-loup Gailly (jloup@gzip.org) +and Mark Adler (madler@alumni.caltech.edu). +.LP +This software is provided "as-is," +without any express or implied warranty. +In no event will the authors be held liable for any damages +arising from the use of this software. +See the distribution directory with respect to requirements +governing redistribution. +The deflate format used by +.I zlib +was defined by Phil Katz. +The deflate and +.I zlib +specifications were written by L. Peter Deutsch. +Thanks to all the people who reported problems and suggested various +improvements in +.IR zlib ; +who are too numerous to cite here. +.LP +UNIX manual page by R. P. C. Rodgers, +U.S. National Library of Medicine (rodgers@nlm.nih.gov). +.\" end of man page diff --git a/src/SDL2/external/zlib-1.2.8/zlib.3.pdf b/src/SDL2/external/zlib-1.2.8/zlib.3.pdf new file mode 100644 index 0000000000000000000000000000000000000000..a346b5d7e24834806b0871b209637c728fb36d60 GIT binary patch literal 8734 zcmcgyc|6o>+eadkB}+)9$uc7`yJ0M2-wiSxOO#;-leL+#muyG-WLHRJUy>zz3rU6S zLM3F05=xee>iv!CoX*pE-sgEgpYwTt|G4M+UDtJgukF6C`~H!&)H6^-!Z0A&2X8K1 z1u20MU|*LbAa!-P8O6t);Q_`16f3v^)r&!)f#C*TBnCx~;_6GL;PD_jgGM2FgM!j? z9a`guYXxtu+KypMPQgUjw>eI>FBw(nR$xtcGv6}0B05}bkEZG;*B0dazZDz0GJb*q z!A4dYp#x^RbEPgCO)f4{uHqA7Q9|RI?`wvfO7IYJ-{EL7{oTjN!jt#b_XSMmd)md0 ziw&-decEjxWF9XkHQ2BiO=?Mb=uJojv?wj&~&Qk{-JhWY8BD z8EET!7#8-Hvw79@e(SPCzn1;s+1JeVlOl6Iqe;gPS9Kh53i&Gi_NMMDg-(z3aI3ek zs& zLd0iNOWJSGh?+vE;t;8Vl}$tAVpZ?g3lzwSxt9V5#Ne75Uq8HVUM^l;=#*Ry31vKu zrMdjJ$l6cqnloM4x;lFkA&bMzF~*I3Gc6FqZcleF(Wad%5s&4DlFJ6`Wip4#=Gu-C zJ~`sHI6jiOopMwnbb;sdp0)BJ*l@a>Z#g{isuH$@!Q&PArAue99A zb#S>Ma5J3qLLANv_r6P}5|dY6cCxPI=FOAaAGui*`zItgxcYaRY{w4RBJ*`j+#+0s zz*LtwYLHY*wSuTZw!M7zSQd0nBPN+kUhpJ_Lt1=iM6N>@7XGTNFND05v| zkwY=`>f|087mR*w z))jbhJ~mNpidwMgu8#8on8=VjRjX?B;yJmqP-k~*+GTu~hOkJm?mQc+2eX|M@@g;h z$Z+0pf=Pp+Hcm{CkMM|d;#MRl+gLxnda~Rgvefp&f$8UYGL$}Mnj$;*$I$206SOv+ zw0H}MY?GZcH+N9{j>(0#<2+pUQR(&7NE35eK_`U?L`05Rr0scT*)c7mXz=xH2@?xZ zYGreI4k4$#>3T`8E}}JOfFpWp?YPqpwx@OSn3YZ1>y4I;7@bBi+jhu#mGtfRIwp#a ztZXw5=h}}EAb+jhpLCne^TQ;zObA)4B?ZB?-Prm`BS=!Z^5$W-p@Ixm;mu z*B!D7NK#CEnYGo+aG&>8Pxo}6JckmaHhDLWJ*r`Ue(d)<@*>hN%kyPzbJ_ZCN0F_~ zH_sycW*EG}Hu4Q%#I0yhHm@+qie#(JyHh;6mMo>l8IxR~!`n0@Fk9qgr|Z#h62sp| zTw(V5UQ#o58h)}ms5o?u%H1st!Xs|p>`CGmL)x7E~jF0Niav7W}|LIwU^Wft4|_3dxKmg zv~BI$vNPBXS2Cs~jbwyB#}HbNXxTUoZGOpyu1Q(s4JWE$V&8Q%O*bm`pE7}1tUDX{*aVzc#C@-Dw;ZJ^ioEWbmF-v zo9p=jrz7bo*~Tro`{)8@SmbnuI?VC`!X#3NRIKcmD&=IsKW0rY>P=MVC1G#*<|`BFoSo_~j?AkyKEM^^1=e@4h4!EEyIpNQ z1BX_7{pp_RaV}$7Cob<7kBCedeh;$JicZyeBs^ww=8dc3iHFKl zXx*Z{sO)a#fdKK9uHTBI__FkwcPbBRt(9ku6+aF+q$J`S=x8X$oEXes$@f{M)JU|s zJY(B`?Rutg5$N2Kz-6YG?fuM5y=2$R*Id+gX_Tx-q(UU(=H>P}vYq+eJ)&43>{(Z? zp{y%Og2O89wrcf6O5--z5+eK3PR`$pUf3A%h76(r*pU=Q*S+(+X;s`-r{Gn5VrWrCmJ(FGu3S4 zNc)F7FMtayC?ib64C)v&Q|**_j^E*zep`+lulfY7_gQ}Zxp$?#{mR~9YiwiBrC#TK z#dW6T8DE>LFDvb|H1x{Z!-mG5%bK%uENHlP!o6U2`Of~{%O0g$E_y;r zj}5l?n4ipVTPmD6X!4~f6gtM^T7FINlyBA~e!aF`nScX#*Ui+#URS!uuf7Iz$T)X` zsE3y;R^@sSkB*xOf5N;{?ON&0a&7k9`oSuq8~bz5lqSQfY*51K zx7umWJWtaXuI(~Mo_J(h(_D>dTV>d;IzHV-<$$yTThxoAc+#j~cO`Gz<19cawYV zPH#2cH3!L3F=sw_optps$8O2r1QAEQ-wgR8`}H;-JZDg&?dbo+uw_iS;I|x|PYK1% zx^?gG?wT!Kp}jnHUif&n36i#7>Ea5M*C>)*^3Ab`0;#a;pQXxcF8g_5C2BD~r!71_ zZ3%G+D3E=7ZT5P8r4CGBPO|pvUVH9SCPSoohg3A3@|qw!Znki2RqxCAB3qj@_XyJa z+MuuYCAW8ymCIXS`>^p(Ww=?ZWv({Z&WI%HRh&307bM(b&6YMD8Se zd3=9j+YJG_7{&6+u$C(=qzAj{!{^R9lu}*S?r(rm$soUcd5q~ z&My|>cqO^2AMr;`n|&GOOdU(R9az8Ew_-?VhCo8b7X>&p376(G{WI3B)cy<+RCWw4!RVgfIKFY{7Lip(j|4eYf{=+ zR~I`PpKNr5n-Zpue=8OJ?n{8S9YoiZl&sG5kZ27qX$H;vH{2>xhnmiJS6A86i)k0v zugSw8t3?g){=Aw9F}}+}*U#1b4vJVsZ`%_q3OXIlyI2$h_jelO@rt_~Pz#_h`-)?YrmW4`WSXIkbhqOF-x$wC;S)pK*sN`~sp;VWUI?;j1tL9Tx#+gO_E z=_SfO;&XJf9o#|R)EuB0>KU*gre5VfQm>4W$zG3*bv+mmJU%zbq6z`x*@gaXdqyZz=!H#vD zWBo;ARM4RBG$iJiQy-Fb5d4qFzT>vfXcKzdj<4F9y^|rnBbQ3>99p?sp+JU{J93TW zOv<6vcJ?$G-2FAaw_S`b{fb*#r>t8B9xXAh;E&fYYl%-qzkseE_JX7g#+20aNEf#@ zM>psTeNn_tKG}sOe{c@deCMu$j12+Q7qd8N3$ozN36P<5?7FRx)fe!8xXyz49ex2flk28t`HQ#>XYRk_7H zN_)=kNS)l*(JiMNrQEuFHqiHae&m7s4AhC`m$Jdi>&MpKyl$CY?HipQ-SayKtfN+I zYb!eRLZF{MpF0PKUL~djHSO8w(EHT8Z(Op4T13FkBfosQU1FO9epX#auc0+3wE4gu zR#)h|x4L+Xb+Q}VfZRoeVIl7b;SB$D^>59uu;;VJi{ZK8Pw-7lJ} zgeDfQ54DZhTY{6el9;dkDCY3MK^fEXl!dR|+pa zV|TJPc3;Ot?ujI)g$n+MFWa79?lU`S^J!i@Bv0hRD^hPtJ=EXxY_6`o+Zhm;qEPUK zIG|IN_Yqgt82N_R)-nMzFm{eO<@xqm{^Wxu=vXS-6Q1fbU-rA3Xi>)bq7cJ+Nk?n; zC2~j$J3JfF_&52r?8ZoQMZT=DKqGsY&W`%ObRtm0x>X4a^q)7}R+4BP0u{kuw!^Qc$s z{uq3OX3>~ebf*5KTKiM!aA+!YtpcXp(qh@BQo#(pTw2cEvyn}Hks>zz^dw;q@z11@)nZqxlZx$Gd{ls_#B2T zPL6M_fUo&i&h7<^oxQ3~a8lqEITRyd!oN~GSit^v^18QY1AnliPqht??VF?S$;4BE zvG=Ze=kI!w?9TIcVViS%QbU`~I2g5*3BoVnv=K^7w zdwL5HVc?w76Ml0!4n`%{GO6Hvm6CHW&o5qvmRhtVyfb!Cwr(r^pj(WTTDt$#uDn}`CwwmU z=Y!Om9Rz{2d{=}$9kmrlF52v(@E!VYwt-8#i`4C_6F|X268;X zE4*o`<;_juyA2Lc-qd&V@Lh=K4|$$3AZ}LJtnl&hB91fe14?nW5~F>j@6Cw{hHCg4 zcFPp_!$<2VOXoeaX)*n<%i{4m*aY*G5ym(7Vf=)zxmfsIX`)eInUSd|~mz)!t^ zb+8`=Zb@>dzzGyGm89bv1U`rW`T{Hx1y;tPoIr3ZUj}d=3`PK4G>Q)cjAnHW0GUGf z^{2T~=)g6yCC%5BNMRg=0~gI;xHTn+0m$hGF${?tqDbU75d&X99MH>>2X2<(y1;Kh zBOScah_FaMnibX@-><0uUjS}gfP>)Q04o0qaHD(L0R0`|p8x@S0T+Tdd`JhwO{ru$ z_#lYoVJi^wo3EU}fT{j~?Wmt^{Huuo3yDGU@^$~A>ARZ=6b6Y5ya6L|KVW@_z=HX+ zkN)sC2yS6X03-4EAKqlS|2wCZGHAoRpM1@V$B(y21PIBBz7^aG2ilkrZlwZJVNrgP z_|abik^dWgKjE_a@AR=|{Ek3}M5nN#05_s|1yC4NSCXQIix>5%KV`$s8xaD*iT*AO zR^GBa57_x5ZCHT+y&fH3FYrvg@C_qU8HFOY!L}B3!su!68LShhbH!9rC3xrfg!@a3K{&c55ZQMwMpVj?HkUza* zM=<;GVF!uEVDb3xrvr7(AU~3;Cxroap}13hG@uI&cc5S@Sp#aTL_iSybSWNGqYxT} z7-DYi8sh1SBSSUuAazX=aHyat29f*}-8Q}u(ZLkDtA>=Wm6?GQiy=rg$lK2w$Ww5T zx0erHHAn-xA)*S5S!6gAyurfo)PUL%EWr$4UoTH8Pz^8~45^4jD}dc-ByUQfFU=E- zgkhn8N*dWs)e2Zkz9|HLX+S*~3_n#kJTNd27Kn!V(%j)l91aIZpx`K!BEX?Y5B6b@ zf)st|(!hKhK&Wn`Z1`!K48|wBo|+Qh6dE% zpGsC$A|aJgu1aJ@ii$Eu5s9Rb6%oLrNWx-W+{kEGlq(tcV>-W|VE$!3-~})t8t?-! zQUw-EvcD^ZrU5myGy@xY_|h5Q<_F_o2qh@|yZQeVDj+t0?*$;B-`$`N@Td}iWOfVI z1D1L`3V}o`A~1?56>B6`6@gY|{Zv*(Ak^Xi!U+T)5Y+{~5CUHe{|nKdIDZoLrC9?h zfp@3*y19V^C^R}N5=a;l2Sa_EaYO7ompYskqo2IcC3|mElFfZ`7W)7vtN&i^{4cRWFi{y9P8!kxX$T`Fk;-cpIM$Zt}Ni zcv11+1{-qlKXv_0tTsqMZ3AJ0|FLr5LEwMr`R5ewQ4C!>SU%;jB85(^F*?83Kb+L1Gc;jrxKj5Kw>(sKfuj@x2=4{;pp3{juu@ z(I{>p1Q>+?u@^^?-eT&{PnpUua4=WuS-nE1wb;1MIhd zr6CZkcJr?^v=SEBAOA|jA`yV&{)L9Y{344*D+9g8zwn_EKx_0bG$iJ4Xv)9PlvEJE zU`8vc{DMyji~5CzMWKGtheavf7pY6lhpG=x7eGiW5L7lj7={{t8aJp-)14ps@RkJLx1pm0h!eXNcy3Z;b6 e$Ny&zCsyl8XOL)&jl@tvsvtqKvicSVp#K4G_#7?( literal 0 HcmV?d00001 diff --git a/src/SDL2/external/zlib-1.2.8/zlib.h b/src/SDL2/external/zlib-1.2.8/zlib.h new file mode 100644 index 000000000..3e0c7672a --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/zlib.h @@ -0,0 +1,1768 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.2.8, April 28th, 2013 + + Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 + (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). +*/ + +#ifndef ZLIB_H +#define ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.2.8" +#define ZLIB_VERNUM 0x1280 +#define ZLIB_VER_MAJOR 1 +#define ZLIB_VER_MINOR 2 +#define ZLIB_VER_REVISION 8 +#define ZLIB_VER_SUBREVISION 0 + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed data. + This version of the library supports only one compression method (deflation) + but other algorithms will be added later and will have the same stream + interface. + + Compression can be done in a single step if the buffers are large enough, + or can be done by repeated calls of the compression function. In the latter + case, the application must provide more input and/or consume the output + (providing more output space) before each call. + + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio using the functions that start + with "gz". The gzip format is different from the zlib format. gzip is a + gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + + This library can optionally read and write gzip streams in memory as well. + + The zlib format was designed to be compact and fast for use in memory + and on communications channels. The gzip format was designed for single- + file compression on file systems, has a larger header than zlib to maintain + directory information, and uses a different, slower check method than zlib. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never crash + even in case of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + z_const Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total number of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total number of bytes output so far */ + + z_const char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: binary or text */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + +/* + The application must update next_in and avail_in when avail_in has dropped + to zero. It must update next_out and avail_out when avail_out has dropped + to zero. The application must initialize zalloc, zfree and opaque before + calling the init function. All other fields are set by the compression + library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this if + the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers + returned by zalloc for objects of exactly 65536 bytes *must* have their + offset normalized to zero. The default allocation function provided by this + library ensures this (see zutil.c). To reduce memory requirements and avoid + any allocation of 64K objects, at the expense of compression ratio, compile + the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or progress + reports. After compression, total_in holds the total size of the + uncompressed data and may be saved for use in the decompressor (particularly + if the decompressor wants to decompress everything in a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +#define Z_BLOCK 5 +#define Z_TREES 6 +/* Allowed flush values; see deflate() and inflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative values + * are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_RLE 3 +#define Z_FIXED 4 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ +#define Z_UNKNOWN 2 +/* Possible values of the data_type field (though see inflate()) */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is not + compatible with the zlib.h header file used by the application. This check + is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. If + zalloc and zfree are set to Z_NULL, deflateInit updates them to use default + allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at all + (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION + requests a default compromise between speed and compression (currently + equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if level is not a valid compression level, or + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). msg is set to null + if there is no error message. deflateInit does not perform any compression: + this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). Some + output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating avail_in or avail_out accordingly; avail_out should + never be zero before the call. The application can consume the compressed + output when it wants, for example when the output buffer is full (avail_out + == 0), or after each call of deflate(). If deflate returns Z_OK and with + zero avail_out, it must be called again after making room in the output + buffer because there might be more output pending. + + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumulate before producing output, in order to + maximize compression. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In + particular avail_in is zero after the call if enough output space has been + provided before the call.) Flushing may degrade compression for some + compression algorithms and so it should be used only when necessary. This + completes the current deflate block and follows it with an empty stored block + that is three bits plus filler bits to the next byte, followed by four bytes + (00 00 ff ff). + + If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the + output buffer, but the output is not aligned to a byte boundary. All of the + input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. + This completes the current deflate block and follows it with an empty fixed + codes block that is 10 bits long. This assures that enough bytes are output + in order for the decompressor to finish the block before the empty fixed code + block. + + If flush is set to Z_BLOCK, a deflate block is completed and emitted, as + for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to + seven bits of the current block are held to be written as the next byte after + the next deflate block is completed. In this case, the decompressor may not + be provided enough bits at this point in order to complete decompression of + the data provided so far to the compressor. It may need to wait for the next + block to be emitted. This is for advanced applications that need to control + the emission of deflate blocks. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that + avail_out is greater than six to avoid repeated flush markers due to + avail_out == 0 on return. + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there was + enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the stream + are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least the + value returned by deflateBound (see below). Then deflate is guaranteed to + return Z_STREAM_END. If not enough output space is provided, deflate will + not return Z_STREAM_END, and it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so far (that is, total_in bytes). + + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered + binary. This field is only for information purposes and does not affect the + compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not + fatal, and deflate() can be called again with more input and more output + space to continue compressing. +*/ + + +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, msg + may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the + exact value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit does not perform any decompression + apart from possibly reading the zlib header if present: actual decompression + will be done by inflate(). (So next_in and avail_in may be modified, but + next_out and avail_out are unused and unchanged.) The current implementation + of inflateInit() does not process any header information -- that is deferred + until inflate() is called. +*/ + + +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing will + resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there is + no more input data or no more space in the output buffer (see below about + the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating the next_* and avail_* values accordingly. The + application can consume the uncompressed output when it wants, for example + when the output buffer is full (avail_out == 0), or after each call of + inflate(). If inflate returns Z_OK and with zero avail_out, it must be + called again after making room in the output buffer because there might be + more output pending. + + The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, + Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much + output as possible to the output buffer. Z_BLOCK requests that inflate() + stop if and when it gets to the next deflate block boundary. When decoding + the zlib or gzip format, this will cause inflate() to return immediately + after the header and before the first block. When doing a raw inflate, + inflate() will go ahead and process the first block, and will return when it + gets to the end of that block, or when it runs out of data. + + The Z_BLOCK option assists in appending to or combining deflate streams. + Also to assist in this, on return inflate() will set strm->data_type to the + number of unused bits in the last byte taken from strm->next_in, plus 64 if + inflate() is currently decoding the last block in the deflate stream, plus + 128 if inflate() returned immediately after decoding an end-of-block code or + decoding the complete header up to just before the first byte of the deflate + stream. The end-of-block will not be indicated until all of the uncompressed + data from that block has been written to strm->next_out. The number of + unused bits may in general be greater than seven, except when bit 7 of + data_type is set, in which case the number of unused bits will be less than + eight. data_type is set as noted here every time inflate() returns for all + flush options, and so can be used to determine the amount of currently + consumed input in bits. + + The Z_TREES option behaves as Z_BLOCK does, but it also returns when the + end of each deflate block header is reached, before any actual data in that + block is decoded. This allows the caller to determine the length of the + deflate block header for later use in random access within a deflate block. + 256 is added to the value of strm->data_type when inflate() returns + immediately after reaching the end of the deflate block header. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step (a + single call of inflate), the parameter flush should be set to Z_FINISH. In + this case all pending input is processed and all pending output is flushed; + avail_out must be large enough to hold all of the uncompressed data for the + operation to complete. (The size of the uncompressed data may have been + saved by the compressor for this purpose.) The use of Z_FINISH is not + required to perform an inflation in one step. However it may be used to + inform inflate that a faster approach can be used for the single inflate() + call. Z_FINISH also informs inflate to not maintain a sliding window if the + stream completes, which reduces inflate's memory footprint. If the stream + does not complete, either because not all of the stream is provided or not + enough output space is provided, then a sliding window will be allocated and + inflate() can be called again to continue the operation as if Z_NO_FLUSH had + been used. + + In this implementation, inflate() always flushes as much output as + possible to the output buffer, and always uses the faster approach on the + first call. So the effects of the flush parameter in this implementation are + on the return value of inflate() as noted below, when inflate() returns early + when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of + memory for a sliding window when Z_FINISH is used. + + If a preset dictionary is needed after this call (see inflateSetDictionary + below), inflate sets strm->adler to the Adler-32 checksum of the dictionary + chosen by the compressor and returns Z_NEED_DICT; otherwise it sets + strm->adler to the Adler-32 checksum of all output produced so far (that is, + total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described + below. At the end of the stream, inflate() checks that its computed adler32 + checksum is equal to that saved by the compressor and returns Z_STREAM_END + only if the checksum is correct. + + inflate() can decompress and check either zlib-wrapped or gzip-wrapped + deflate data. The header type is detected automatically, if requested when + initializing with inflateInit2(). Any information contained in the gzip + header is not retained, so applications that need that information should + instead use raw inflate, see inflateInit2() below, or inflateBack() and + perform their own processing of the gzip header and trailer. When processing + gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output + producted so far. The CRC-32 is checked against the gzip trailer. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect check + value), Z_STREAM_ERROR if the stream structure was inconsistent (for example + next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory, + Z_BUF_ERROR if no progress is possible or if there was not enough room in the + output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and + inflate() can be called again with more input and more output space to + continue decompressing. If Z_DATA_ERROR is returned, the application may + then call inflateSync() to look for a good compression block if a partial + recovery of the data is desired. +*/ + + +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by the + caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + windowBits can also be -8..-15 for raw deflate. In this case, -windowBits + determines the window size. deflate() will then generate raw deflate data + with no zlib header or trailer, and will not compute an adler32 check value. + + windowBits can also be greater than 15 for optional gzip encoding. Add + 16 to windowBits to write a simple gzip header and trailer around the + compressed data instead of a zlib wrapper. The gzip header will have no + file name, no extra data, no comment, no modification time (set to zero), no + header crc, and the operating system will be set to 255 (unknown). If a + gzip stream is being written, strm->adler is a crc32 instead of an adler32. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but is + slow and reduces compression ratio; memLevel=9 uses maximum memory for + optimal speed. The default value is 8. See zconf.h for total memory usage + as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match), or Z_RLE to limit match distances to one (run-length + encoding). Filtered data consists mostly of small values with a somewhat + random distribution. In this case, the compression algorithm is tuned to + compress them better. The effect of Z_FILTERED is to force more Huffman + coding and less string matching; it is somewhat intermediate between + Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as + fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The + strategy parameter only affects the compression ratio but not the + correctness of the compressed output even if it is not set appropriately. + Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler + decoder for special applications. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid + method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is + incompatible with the version assumed by the caller (ZLIB_VERSION). msg is + set to null if there is no error message. deflateInit2 does not perform any + compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. When using the zlib format, this + function must be called immediately after deflateInit, deflateInit2 or + deflateReset, and before any call of deflate. When doing raw deflate, this + function must be called either before any call of deflate, or immediately + after the completion of a deflate block, i.e. after all input has been + consumed and all output has been delivered when using any of the flush + options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The + compressor and decompressor must use exactly the same dictionary (see + inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size + provided in deflateInit or deflateInit2. Thus the strings most likely to be + useful should be put at the end of the dictionary, not at the front. In + addition, the current implementation of deflate will use at most the window + size minus 262 bytes of the provided dictionary. + + Upon return of this function, strm->adler is set to the adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) If a raw deflate was requested, then the + adler32 value is not computed and strm->adler is not set. + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if not at a block boundary for raw deflate). deflateSetDictionary does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and can + consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. The + stream will keep the same compression level and any other attributes that + may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different strategy. + If the compression level is changed, the input available so far is + compressed with the old level (and may be flushed); the new level will take + effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to be + compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if + strm->avail_out was zero. +*/ + +ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, + int good_length, + int max_lazy, + int nice_length, + int max_chain)); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + +ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, + uLong sourceLen)); +/* + deflateBound() returns an upper bound on the compressed size after + deflation of sourceLen bytes. It must be called after deflateInit() or + deflateInit2(), and after deflateSetHeader(), if used. This would be used + to allocate an output buffer for deflation in a single pass, and so would be + called before deflate(). If that first deflate() call is provided the + sourceLen input bytes, an output buffer allocated to the size returned by + deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed + to return Z_STREAM_END. Note that it is possible for the compressed size to + be larger than the value returned by deflateBound() if flush options other + than Z_FINISH or Z_NO_FLUSH are used. +*/ + +ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm, + unsigned *pending, + int *bits)); +/* + deflatePending() returns the number of bytes and bits of output that have + been generated, but not yet provided in the available output. The bytes not + provided would be due to the available output space having being consumed. + The number of bits of output not provided are between 0 and 7, where they + await more bits to join them in order to fill out a full byte. If pending + or bits are Z_NULL, then those values are not set. + + deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. + */ + +ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + deflatePrime() inserts bits in the deflate output stream. The intent + is that this function is used to start off the deflate output with the bits + leftover from a previous deflate stream when appending to it. As such, this + function can only be used for raw deflate, and must be used before the first + deflate() call after a deflateInit2() or deflateReset(). bits must be less + than or equal to 16, and that many of the least significant bits of value + will be inserted in the output. + + deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough + room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, + gz_headerp head)); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to 255, with no extra, name, or comment + fields. The gzip header is returned to the default state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. windowBits must be greater than or equal to the windowBits value + provided to deflateInit2() while compressing, or it must be equal to 15 if + deflateInit2() was not used. If a compressed stream with a larger window + size is given as input, inflate() will return with the error code + Z_DATA_ERROR instead of trying to allocate a larger window. + + windowBits can also be zero to request that inflate use the window size in + the zlib header of the compressed stream. + + windowBits can also be -8..-15 for raw inflate. In this case, -windowBits + determines the window size. inflate() will then process raw deflate data, + not looking for a zlib or gzip header, not generating a check value, and not + looking for any check values for comparison at the end of the stream. This + is for use with other formats that use the deflate compressed data format + such as zip. Those formats provide their own check values. If a custom + format is developed using the raw deflate format for compressed data, it is + recommended that a check value such as an adler32 or a crc32 be applied to + the uncompressed data as is done in the zlib, gzip, and zip formats. For + most applications, the zlib format should be used as is. Note that comments + above on the use in deflateInit2() applies to the magnitude of windowBits. + + windowBits can also be greater than 15 for optional gzip decoding. Add + 32 to windowBits to enable zlib and gzip decoding with automatic header + detection, or add 16 to decode only the gzip format (the zlib format will + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a + crc32 instead of an adler32. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit2 does not perform any decompression + apart from possibly reading the zlib header if present: actual decompression + will be done by inflate(). (So next_in and avail_in may be modified, but + next_out and avail_out are unused and unchanged.) The current implementation + of inflateInit2() does not process any header information -- that is + deferred until inflate() is called. +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the adler32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called at any + time to set the dictionary. If the provided dictionary is smaller than the + window and there is already data in the window, then the provided dictionary + will amend what's there. The application must insure that the dictionary + that was used for compression is provided. + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm, + Bytef *dictionary, + uInt *dictLength)); +/* + Returns the sliding dictionary being maintained by inflate. dictLength is + set to the number of bytes in the dictionary, and that many bytes are copied + to dictionary. dictionary must have enough space, where 32768 bytes is + always enough. If inflateGetDictionary() is called with dictionary equal to + Z_NULL, then only the dictionary length is returned, and nothing is copied. + Similary, if dictLength is Z_NULL, then it is not set. + + inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the + stream state is inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a possible full flush point (see above + for the description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync searches for a 00 00 FF FF pattern in the compressed data. + All full flush points have this pattern, but not all occurrences of this + pattern are full flush points. + + inflateSync returns Z_OK if a possible full flush point has been found, + Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point + has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. + In the success case, the application may save the current current value of + total_in which indicates where valid compressed data was found. In the + error case, the application may repeatedly call inflateSync, providing more + input each time, until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when randomly accessing a large stream. The + first pass through the stream can periodically record the inflate state, + allowing restarting inflate at those points when randomly accessing the + stream. + + inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. The + stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm, + int windowBits)); +/* + This function is the same as inflateReset, but it also permits changing + the wrap and window size requests. The windowBits parameter is interpreted + the same as it is for inflateInit2. + + inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL), or if + the windowBits parameter is invalid. +*/ + +ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + If bits is negative, then the input stream bit buffer is emptied. Then + inflatePrime() can be called again to put bits in the buffer. This is used + to clear out bits leftover after feeding inflate a block description prior + to feeding inflate codes. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm)); +/* + This function returns two values, one in the lower 16 bits of the return + value, and the other in the remaining upper bits, obtained by shifting the + return value down 16 bits. If the upper value is -1 and the lower value is + zero, then inflate() is currently decoding information outside of a block. + If the upper value is -1 and the lower value is non-zero, then inflate is in + the middle of a stored block, with the lower value equaling the number of + bytes from the input remaining to copy. If the upper value is not -1, then + it is the number of bits back from the current bit position in the input of + the code (literal or length/distance pair) currently being processed. In + that case the lower value is the number of bytes already emitted for that + code. + + A code is being processed if inflate is waiting for more input to complete + decoding of the code, or if it has completed decoding but is waiting for + more output space to write the literal or match data. + + inflateMark() is used to mark locations in the input data for random + access, which may be at bit positions, and to note those cases where the + output of a code may span boundaries of random access blocks. The current + location in the input stream can be determined from avail_in and data_type + as noted in the description for the Z_BLOCK flush parameter for inflate. + + inflateMark returns the value noted above or -1 << 16 if the provided + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, + gz_headerp head)); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be + used to force inflate() to return immediately after header processing is + complete and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When any + of extra, name, or comment are not Z_NULL and the respective field is not + present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, + unsigned char FAR *window)); + + Initialize the internal stream state for decompression using inflateBack() + calls. The fields zalloc, zfree and opaque in strm must be initialized + before the call. If zalloc and zfree are Z_NULL, then the default library- + derived memory allocation routines are used. windowBits is the base two + logarithm of the window size, in the range 8..15. window is a caller + supplied buffer of that size. Except for special applications where it is + assured that deflate was used with small window sizes, windowBits must be 15 + and a 32K byte window must be supplied to be able to decompress general + deflate streams. + + See inflateBack() for the usage of these routines. + + inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of + the parameters are invalid, Z_MEM_ERROR if the internal state could not be + allocated, or Z_VERSION_ERROR if the version of the library does not match + the version of the header file. +*/ + +typedef unsigned (*in_func) OF((void FAR *, + z_const unsigned char FAR * FAR *)); +typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); + +ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc)); +/* + inflateBack() does a raw inflate with a single call using a call-back + interface for input and output. This is potentially more efficient than + inflate() for file i/o applications, in that it avoids copying between the + output and the sliding window by simply making the window itself the output + buffer. inflate() can be faster on modern CPUs when used with large + buffers. inflateBack() trusts the application to not change the output + buffer passed by the output function, at least until inflateBack() returns. + + inflateBackInit() must be called first to allocate the internal state + and to initialize the state with the user-provided window buffer. + inflateBack() may then be used multiple times to inflate a complete, raw + deflate stream with each call. inflateBackEnd() is then called to free the + allocated state. + + A raw deflate stream is one with no zlib or gzip header or trailer. + This routine would normally be used in a utility that reads zip or gzip + files and writes out uncompressed files. The utility would decode the + header and process the trailer on its own, hence this routine expects only + the raw deflate stream to decompress. This is different from the normal + behavior of inflate(), which expects either a zlib or gzip header and + trailer around the deflate stream. + + inflateBack() uses two subroutines supplied by the caller that are then + called by inflateBack() for input and output. inflateBack() calls those + routines until it reads a complete deflate stream and writes out all of the + uncompressed data, or until it encounters an error. The function's + parameters and return types are defined above in the in_func and out_func + typedefs. inflateBack() will call in(in_desc, &buf) which should return the + number of bytes of provided input, and a pointer to that input in buf. If + there is no input available, in() must return zero--buf is ignored in that + case--and inflateBack() will return a buffer error. inflateBack() will call + out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() + should return zero on success, or non-zero on failure. If out() returns + non-zero, inflateBack() will return with an error. Neither in() nor out() + are permitted to change the contents of the window provided to + inflateBackInit(), which is also the buffer that out() uses to write from. + The length written by out() will be at most the window size. Any non-zero + amount of input may be provided by in(). + + For convenience, inflateBack() can be provided input on the first call by + setting strm->next_in and strm->avail_in. If that input is exhausted, then + in() will be called. Therefore strm->next_in must be initialized before + calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called + immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in + must also be initialized, and then if strm->avail_in is not zero, input will + initially be taken from strm->next_in[0 .. strm->avail_in - 1]. + + The in_desc and out_desc parameters of inflateBack() is passed as the + first parameter of in() and out() respectively when they are called. These + descriptors can be optionally used to pass any information that the caller- + supplied in() and out() functions need to do their job. + + On return, inflateBack() will set strm->next_in and strm->avail_in to + pass back any unused input that was provided by the last in() call. The + return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR + if in() or out() returned an error, Z_DATA_ERROR if there was a format error + in the deflate stream (in which case strm->msg is set to indicate the nature + of the error), or Z_STREAM_ERROR if the stream was not properly initialized. + In the case of Z_BUF_ERROR, an input or output error can be distinguished + using strm->next_in which will be Z_NULL only if in() returned an error. If + strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning + non-zero. (in() will always be called before out(), so strm->next_in is + assured to be defined if out() returns non-zero.) Note that inflateBack() + cannot return Z_OK. +*/ + +ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); +/* + All memory allocated by inflateBackInit() is freed. + + inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream + state was inconsistent. +*/ + +ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); +/* Return flags indicating compile-time options. + + Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: + 1.0: size of uInt + 3.2: size of uLong + 5.4: size of voidpf (pointer) + 7.6: size of z_off_t + + Compiler, assembler, and debug options: + 8: DEBUG + 9: ASMV or ASMINF -- use ASM code + 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention + 11: 0 (reserved) + + One-time table building (smaller code, but not thread-safe if true): + 12: BUILDFIXED -- build static block decoding tables when needed + 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed + 14,15: 0 (reserved) + + Library content (indicates missing functionality): + 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking + deflate code when not needed) + 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect + and decode gzip streams (to avoid linking crc code) + 18-19: 0 (reserved) + + Operation variations (changes in library functionality): + 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate + 21: FASTEST -- deflate algorithm with only one, lowest compression level + 22,23: 0 (reserved) + + The sprintf variant used by gzprintf (zero is best): + 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format + 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! + 26: 0 = returns value, 1 = void -- 1 means inferred string length returned + + Remainder: + 27-31: 0 (reserved) + */ + +#ifndef Z_SOLO + + /* utility functions */ + +/* + The following utility functions are implemented on top of the basic + stream-oriented functions. To simplify the interface, some default options + are assumed (compression level and memory usage, standard memory allocation + functions). The source code of these utility functions can be modified if + you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); +/* + compressBound() returns an upper bound on the compressed size after + compress() or compress2() on sourceLen bytes. It would be used before a + compress() or compress2() call to allocate the destination buffer. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be large enough to hold the entire + uncompressed data. (The size of the uncompressed data must have been saved + previously by the compressor and transmitted to the decompressor by some + mechanism outside the scope of this compression library.) Upon exit, destLen + is the actual size of the uncompressed buffer. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In + the case where there is not enough room, uncompress() will fill the output + buffer with the uncompressed data up to that point. +*/ + + /* gzip file access functions */ + +/* + This library supports reading and writing files in gzip (.gz) format with + an interface similar to that of stdio, using the functions that start with + "gz". The gzip format is different from the zlib format. gzip is a gzip + wrapper, documented in RFC 1952, wrapped around a deflate stream. +*/ + +typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ + +/* +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); + + Opens a gzip (.gz) file for reading or writing. The mode parameter is as + in fopen ("rb" or "wb") but can also include a compression level ("wb9") or + a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only + compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' + for fixed code compression as in "wb9F". (See the description of + deflateInit2 for more information about the strategy parameter.) 'T' will + request transparent writing or appending with no compression and not using + the gzip format. + + "a" can be used instead of "w" to request that the gzip stream that will + be written be appended to the file. "+" will result in an error, since + reading and writing to the same gzip file is not supported. The addition of + "x" when writing will create the file exclusively, which fails if the file + already exists. On systems that support it, the addition of "e" when + reading or writing will set the flag to close the file on an execve() call. + + These functions, as well as gzip, will read and decode a sequence of gzip + streams in a file. The append function of gzopen() can be used to create + such a file. (Also see gzflush() for another way to do this.) When + appending, gzopen does not test whether the file begins with a gzip stream, + nor does it look for the end of the gzip streams to begin appending. gzopen + will simply append a gzip stream to the existing file. + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. When + reading, this will be detected automatically by looking for the magic two- + byte gzip header. + + gzopen returns NULL if the file could not be opened, if there was + insufficient memory to allocate the gzFile state, or if an invalid mode was + specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). + errno can be checked to determine if the reason gzopen failed was that the + file could not be opened. +*/ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen associates a gzFile with the file descriptor fd. File descriptors + are obtained from calls like open, dup, creat, pipe or fileno (if the file + has been previously opened with fopen). The mode parameter is as in gzopen. + + The next call of gzclose on the returned gzFile will also close the file + descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor + fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, + mode);. The duplicated descriptor should be saved to avoid a leak, since + gzdopen does not close fd if it fails. If you are using fileno() to get the + file descriptor from a FILE *, then you will have to use dup() to avoid + double-close()ing the file descriptor. Both gzclose() and fclose() will + close the associated file descriptor, so they need to have different file + descriptors. + + gzdopen returns NULL if there was insufficient memory to allocate the + gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not + provided, or '+' was provided), or if fd is -1. The file descriptor is not + used until the next gz* read, write, seek, or close operation, so gzdopen + will not detect if fd is invalid (unless fd is -1). +*/ + +ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); +/* + Set the internal buffer size used by this library's functions. The + default buffer size is 8192 bytes. This function must be called after + gzopen() or gzdopen(), and before any other calls that read or write the + file. The buffer memory allocation is always deferred to the first read or + write. Two buffers are allocated, either both of the specified size when + writing, or one of the specified size and the other twice that size when + reading. A larger buffer size of, for example, 64K or 128K bytes will + noticeably increase the speed of decompression (reading). + + The new buffer size also affects the maximum length for gzprintf(). + + gzbuffer() returns 0 on success, or -1 on failure, such as being called + too late. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. If + the input file is not in gzip format, gzread copies the given number of + bytes into the buffer directly from the file. + + After reaching the end of a gzip stream in the input, gzread will continue + to read, looking for another gzip stream. Any number of gzip streams may be + concatenated in the input file, and will all be decompressed by gzread(). + If something other than a gzip stream is encountered after a gzip stream, + that remaining trailing garbage is ignored (and no error is returned). + + gzread can be used to read a gzip file that is being concurrently written. + Upon reaching the end of the input, gzread will return with the available + data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then + gzclearerr can be used to clear the end of file indicator in order to permit + gzread to be tried again. Z_OK indicates that a gzip stream was completed + on the last gzread. Z_BUF_ERROR indicates that the input file ended in the + middle of a gzip stream. Note that gzread does not return -1 in the event + of an incomplete gzip stream. This error is deferred until gzclose(), which + will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip + stream. Alternatively, gzerror can be used before gzclose to detect this + case. + + gzread returns the number of uncompressed bytes actually read, less than + len for end of file, or -1 for error. +*/ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + voidpc buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes written or 0 in case of + error. +*/ + +ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the arguments to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written, or 0 in case of error. The number of + uncompressed bytes written is limited to 8191, or one less than the buffer + size given to gzbuffer(). The caller should assure that this limit is not + exceeded. If it is exceeded, then gzprintf() will return an error (0) with + nothing written. In this case, there may also be a buffer overflow with + unpredictable consequences, which is possible only if zlib was compiled with + the insecure functions sprintf() or vsprintf() because the secure snprintf() + or vsnprintf() functions were not available. This can be determined using + zlibCompileFlags(). +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or a + newline character is read and transferred to buf, or an end-of-file + condition is encountered. If any characters are read or if len == 1, the + string is terminated with a null character. If no characters are read due + to an end-of-file or len < 1, then the buffer is left untouched. + + gzgets returns buf which is a null-terminated string, or it returns NULL + for end-of-file or in case of error. If there was an error, the contents at + buf are indeterminate. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. gzputc + returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte or -1 + in case of end of file or error. This is implemented as a macro for speed. + As such, it does not do all of the checking the other functions do. I.e. + it does not check to see if file is NULL, nor whether the structure file + points to has been clobbered or not. +*/ + +ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); +/* + Push one character back onto the stream to be read as the first character + on the next read. At least one character of push-back is allowed. + gzungetc() returns the character pushed, or -1 on failure. gzungetc() will + fail if c is -1, and may fail if a character has been pushed but not read + yet. If gzungetc is used immediately after gzopen or gzdopen, at least the + output buffer size of pushed characters is allowed. (See gzbuffer above.) + The pushed character will be discarded if the stream is repositioned with + gzseek() or gzrewind(). +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter flush + is as in the deflate() function. The return value is the zlib error number + (see function gzerror below). gzflush is only permitted when writing. + + If the flush parameter is Z_FINISH, the remaining data is written and the + gzip stream is completed in the output. If gzwrite() is called again, a new + gzip stream will be started in the output. gzread() is able to read such + concatented gzip streams. + + gzflush should be called only when strictly necessary because it will + degrade compression if called too often. +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); + + Sets the starting position for the next gzread or gzwrite on the given + compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); + + Returns the starting position for the next gzread or gzwrite on the given + compressed file. This position represents a number of bytes in the + uncompressed data stream, and is zero when starting, even if appending or + reading a gzip stream from the middle of a file using gzdopen(). + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); + + Returns the current offset in the file being read or written. This offset + includes the count of bytes that precede the gzip stream, for example when + appending or when using gzdopen() for reading. When reading, the offset + does not include as yet unused buffered input. This information can be used + for a progress indicator. On error, gzoffset() returns -1. +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns true (1) if the end-of-file indicator has been set while reading, + false (0) otherwise. Note that the end-of-file indicator is set only if the + read tried to go past the end of the input, but came up short. Therefore, + just like feof(), gzeof() may return false even if there is no more data to + read, in the event that the last read request was for the exact number of + bytes remaining in the input file. This will happen if the input file size + is an exact multiple of the buffer size. + + If gzeof() returns true, then the read functions will return no more data, + unless the end-of-file indicator is reset by gzclearerr() and the input file + has grown since the previous end of file was detected. +*/ + +ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); +/* + Returns true (1) if file is being copied directly while reading, or false + (0) if file is a gzip stream being decompressed. + + If the input file is empty, gzdirect() will return true, since the input + does not contain a gzip stream. + + If gzdirect() is used immediately after gzopen() or gzdopen() it will + cause buffers to be allocated to allow reading the file to determine if it + is a gzip file. Therefore if gzbuffer() is used, it should be called before + gzdirect(). + + When writing, gzdirect() returns true (1) if transparent writing was + requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: + gzdirect() is not needed when writing. Transparent writing must be + explicitly requested, so the application already knows the answer. When + linking statically, using gzdirect() will include all of the zlib code for + gzip file reading and decompression, which may not be desired.) +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file and + deallocates the (de)compression state. Note that once file is closed, you + cannot call gzerror with file, since its structures have been deallocated. + gzclose must not be called more than once on the same file, just as free + must not be called more than once on the same allocation. + + gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a + file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the + last read ended in the middle of a gzip stream, or Z_OK on success. +*/ + +ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); +ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); +/* + Same as gzclose(), but gzclose_r() is only for use when reading, and + gzclose_w() is only for use when writing or appending. The advantage to + using these instead of gzclose() is that they avoid linking in zlib + compression or decompression code that is not used when only reading or only + writing respectively. If gzclose() is used, then both compression and + decompression code will be included the application when linking to a static + zlib library. +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the given + compressed file. errnum is set to zlib error number. If an error occurred + in the file system and not in the compression library, errnum is set to + Z_ERRNO and the application may consult errno to get the exact error code. + + The application must not modify the returned string. Future calls to + this function may invalidate the previously returned string. If file is + closed, then the string previously returned by gzerror will no longer be + available. + + gzerror() should be used to distinguish errors from end-of-file for those + functions above that do not distinguish those cases in their return values. +*/ + +ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); +/* + Clears the error and end-of-file flags for file. This is analogous to the + clearerr() function in stdio. This is useful for continuing to read a gzip + file that is being written concurrently. +*/ + +#endif /* !Z_SOLO */ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the compression + library. +*/ + +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is Z_NULL, this function returns the + required initial value for the checksum. + + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. + + Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +/* +ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, + z_off_t len2)); + + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note + that the z_off_t type (like off_t) is a signed integer. If len2 is + negative, the result has no meaning or utility. +*/ + +ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +/* + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. If buf is Z_NULL, this function returns the required + initial value for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. + + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +/* +ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); + + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, + unsigned char FAR *window, + const char *version, + int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ + (int)sizeof(z_stream)) +#define inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, (int)sizeof(z_stream)) + +#ifndef Z_SOLO + +/* gzgetc() macro and its supporting function and exposed data structure. Note + * that the real internal state is much larger than the exposed structure. + * This abbreviated structure exposes just enough for the gzgetc() macro. The + * user should not mess with these exposed elements, since their names or + * behavior could change in the future, perhaps even capriciously. They can + * only be used by the gzgetc() macro. You have been warned. + */ +struct gzFile_s { + unsigned have; + unsigned char *next; + z_off64_t pos; +}; +ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +# define z_gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) +#else +# define gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) +#endif + +/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or + * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if + * both are true, the application gets the *64 functions, and the regular + * functions are changed to 64 bits) -- in case these are set on systems + * without large file support, _LFS64_LARGEFILE must also be true + */ +#ifdef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); + ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); +#endif + +#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) +# ifdef Z_PREFIX_SET +# define z_gzopen z_gzopen64 +# define z_gzseek z_gzseek64 +# define z_gztell z_gztell64 +# define z_gzoffset z_gzoffset64 +# define z_adler32_combine z_adler32_combine64 +# define z_crc32_combine z_crc32_combine64 +# else +# define gzopen gzopen64 +# define gzseek gzseek64 +# define gztell gztell64 +# define gzoffset gzoffset64 +# define adler32_combine adler32_combine64 +# define crc32_combine crc32_combine64 +# endif +# ifndef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); +# endif +#else + ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); +#endif + +#else /* Z_SOLO */ + + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); + +#endif /* !Z_SOLO */ + +/* hack for buggy compilers */ +#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; +#endif + +/* undocumented functions */ +ZEXTERN const char * ZEXPORT zError OF((int)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); +ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void)); +ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); +ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); +ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); +#if defined(_WIN32) && !defined(Z_SOLO) +ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path, + const char *mode)); +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file, + const char *format, + va_list va)); +# endif +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* ZLIB_H */ diff --git a/src/SDL2/external/zlib-1.2.8/zlib.map b/src/SDL2/external/zlib-1.2.8/zlib.map new file mode 100644 index 000000000..55c6647eb --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/zlib.map @@ -0,0 +1,83 @@ +ZLIB_1.2.0 { + global: + compressBound; + deflateBound; + inflateBack; + inflateBackEnd; + inflateBackInit_; + inflateCopy; + local: + deflate_copyright; + inflate_copyright; + inflate_fast; + inflate_table; + zcalloc; + zcfree; + z_errmsg; + gz_error; + gz_intmax; + _*; +}; + +ZLIB_1.2.0.2 { + gzclearerr; + gzungetc; + zlibCompileFlags; +} ZLIB_1.2.0; + +ZLIB_1.2.0.8 { + deflatePrime; +} ZLIB_1.2.0.2; + +ZLIB_1.2.2 { + adler32_combine; + crc32_combine; + deflateSetHeader; + inflateGetHeader; +} ZLIB_1.2.0.8; + +ZLIB_1.2.2.3 { + deflateTune; + gzdirect; +} ZLIB_1.2.2; + +ZLIB_1.2.2.4 { + inflatePrime; +} ZLIB_1.2.2.3; + +ZLIB_1.2.3.3 { + adler32_combine64; + crc32_combine64; + gzopen64; + gzseek64; + gztell64; + inflateUndermine; +} ZLIB_1.2.2.4; + +ZLIB_1.2.3.4 { + inflateReset2; + inflateMark; +} ZLIB_1.2.3.3; + +ZLIB_1.2.3.5 { + gzbuffer; + gzoffset; + gzoffset64; + gzclose_r; + gzclose_w; +} ZLIB_1.2.3.4; + +ZLIB_1.2.5.1 { + deflatePending; +} ZLIB_1.2.3.5; + +ZLIB_1.2.5.2 { + deflateResetKeep; + gzgetc_; + inflateResetKeep; +} ZLIB_1.2.5.1; + +ZLIB_1.2.7.1 { + inflateGetDictionary; + gzvprintf; +} ZLIB_1.2.5.2; diff --git a/src/SDL2/external/zlib-1.2.8/zlib.pc.cmakein b/src/SDL2/external/zlib-1.2.8/zlib.pc.cmakein new file mode 100644 index 000000000..a5e642938 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/zlib.pc.cmakein @@ -0,0 +1,13 @@ +prefix=@CMAKE_INSTALL_PREFIX@ +exec_prefix=@CMAKE_INSTALL_PREFIX@ +libdir=@INSTALL_LIB_DIR@ +sharedlibdir=@INSTALL_LIB_DIR@ +includedir=@INSTALL_INC_DIR@ + +Name: zlib +Description: zlib compression library +Version: @VERSION@ + +Requires: +Libs: -L${libdir} -L${sharedlibdir} -lz +Cflags: -I${includedir} diff --git a/src/SDL2/external/zlib-1.2.8/zlib.pc.in b/src/SDL2/external/zlib-1.2.8/zlib.pc.in new file mode 100644 index 000000000..7e5acf9c7 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/zlib.pc.in @@ -0,0 +1,13 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +sharedlibdir=@sharedlibdir@ +includedir=@includedir@ + +Name: zlib +Description: zlib compression library +Version: @VERSION@ + +Requires: +Libs: -L${libdir} -L${sharedlibdir} -lz +Cflags: -I${includedir} diff --git a/src/SDL2/external/zlib-1.2.8/zlib2ansi b/src/SDL2/external/zlib-1.2.8/zlib2ansi new file mode 100755 index 000000000..15e3e165f --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/zlib2ansi @@ -0,0 +1,152 @@ +#!/usr/bin/perl + +# Transform K&R C function definitions into ANSI equivalent. +# +# Author: Paul Marquess +# Version: 1.0 +# Date: 3 October 2006 + +# TODO +# +# Asumes no function pointer parameters. unless they are typedefed. +# Assumes no literal strings that look like function definitions +# Assumes functions start at the beginning of a line + +use strict; +use warnings; + +local $/; +$_ = <>; + +my $sp = qr{ \s* (?: /\* .*? \*/ )? \s* }x; # assume no nested comments + +my $d1 = qr{ $sp (?: [\w\*\s]+ $sp)* $sp \w+ $sp [\[\]\s]* $sp }x ; +my $decl = qr{ $sp (?: \w+ $sp )+ $d1 }xo ; +my $dList = qr{ $sp $decl (?: $sp , $d1 )* $sp ; $sp }xo ; + + +while (s/^ + ( # Start $1 + ( # Start $2 + .*? # Minimal eat content + ( ^ \w [\w\s\*]+ ) # $3 -- function name + \s* # optional whitespace + ) # $2 - Matched up to before parameter list + + \( \s* # Literal "(" + optional whitespace + ( [^\)]+ ) # $4 - one or more anythings except ")" + \s* \) # optional whitespace surrounding a Literal ")" + + ( (?: $dList )+ ) # $5 + + $sp ^ { # literal "{" at start of line + ) # Remember to $1 + //xsom + ) +{ + my $all = $1 ; + my $prefix = $2; + my $param_list = $4 ; + my $params = $5; + + StripComments($params); + StripComments($param_list); + $param_list =~ s/^\s+//; + $param_list =~ s/\s+$//; + + my $i = 0 ; + my %pList = map { $_ => $i++ } + split /\s*,\s*/, $param_list; + my $pMatch = '(\b' . join('|', keys %pList) . '\b)\W*$' ; + + my @params = split /\s*;\s*/, $params; + my @outParams = (); + foreach my $p (@params) + { + if ($p =~ /,/) + { + my @bits = split /\s*,\s*/, $p; + my $first = shift @bits; + $first =~ s/^\s*//; + push @outParams, $first; + $first =~ /^(\w+\s*)/; + my $type = $1 ; + push @outParams, map { $type . $_ } @bits; + } + else + { + $p =~ s/^\s+//; + push @outParams, $p; + } + } + + + my %tmp = map { /$pMatch/; $_ => $pList{$1} } + @outParams ; + + @outParams = map { " $_" } + sort { $tmp{$a} <=> $tmp{$b} } + @outParams ; + + print $prefix ; + print "(\n" . join(",\n", @outParams) . ")\n"; + print "{" ; + +} + +# Output any trailing code. +print ; +exit 0; + + +sub StripComments +{ + + no warnings; + + # Strip C & C++ coments + # From the perlfaq + $_[0] =~ + + s{ + /\* ## Start of /* ... */ comment + [^*]*\*+ ## Non-* followed by 1-or-more *'s + ( + [^/*][^*]*\*+ + )* ## 0-or-more things which don't start with / + ## but do end with '*' + / ## End of /* ... */ comment + + | ## OR C++ Comment + // ## Start of C++ comment // + [^\n]* ## followed by 0-or-more non end of line characters + + | ## OR various things which aren't comments: + + ( + " ## Start of " ... " string + ( + \\. ## Escaped char + | ## OR + [^"\\] ## Non "\ + )* + " ## End of " ... " string + + | ## OR + + ' ## Start of ' ... ' string + ( + \\. ## Escaped char + | ## OR + [^'\\] ## Non '\ + )* + ' ## End of ' ... ' string + + | ## OR + + . ## Anything other char + [^/"'\\]* ## Chars which doesn't start a comment, string or escape + ) + }{$2}gxs; + +} diff --git a/src/SDL2/external/zlib-1.2.8/zutil.c b/src/SDL2/external/zlib-1.2.8/zutil.c new file mode 100644 index 000000000..23d2ebef0 --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/zutil.c @@ -0,0 +1,324 @@ +/* zutil.c -- target dependent utility functions for the compression library + * Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zutil.h" +#ifndef Z_SOLO +# include "gzguts.h" +#endif + +#ifndef NO_DUMMY_DECL +struct internal_state {int dummy;}; /* for buggy compilers */ +#endif + +z_const char * const z_errmsg[10] = { +"need dictionary", /* Z_NEED_DICT 2 */ +"stream end", /* Z_STREAM_END 1 */ +"", /* Z_OK 0 */ +"file error", /* Z_ERRNO (-1) */ +"stream error", /* Z_STREAM_ERROR (-2) */ +"data error", /* Z_DATA_ERROR (-3) */ +"insufficient memory", /* Z_MEM_ERROR (-4) */ +"buffer error", /* Z_BUF_ERROR (-5) */ +"incompatible version",/* Z_VERSION_ERROR (-6) */ +""}; + + +const char * ZEXPORT zlibVersion() +{ + return ZLIB_VERSION; +} + +uLong ZEXPORT zlibCompileFlags() +{ + uLong flags; + + flags = 0; + switch ((int)(sizeof(uInt))) { + case 2: break; + case 4: flags += 1; break; + case 8: flags += 2; break; + default: flags += 3; + } + switch ((int)(sizeof(uLong))) { + case 2: break; + case 4: flags += 1 << 2; break; + case 8: flags += 2 << 2; break; + default: flags += 3 << 2; + } + switch ((int)(sizeof(voidpf))) { + case 2: break; + case 4: flags += 1 << 4; break; + case 8: flags += 2 << 4; break; + default: flags += 3 << 4; + } + switch ((int)(sizeof(z_off_t))) { + case 2: break; + case 4: flags += 1 << 6; break; + case 8: flags += 2 << 6; break; + default: flags += 3 << 6; + } +#ifdef DEBUG + flags += 1 << 8; +#endif +#if defined(ASMV) || defined(ASMINF) + flags += 1 << 9; +#endif +#ifdef ZLIB_WINAPI + flags += 1 << 10; +#endif +#ifdef BUILDFIXED + flags += 1 << 12; +#endif +#ifdef DYNAMIC_CRC_TABLE + flags += 1 << 13; +#endif +#ifdef NO_GZCOMPRESS + flags += 1L << 16; +#endif +#ifdef NO_GZIP + flags += 1L << 17; +#endif +#ifdef PKZIP_BUG_WORKAROUND + flags += 1L << 20; +#endif +#ifdef FASTEST + flags += 1L << 21; +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifdef NO_vsnprintf + flags += 1L << 25; +# ifdef HAS_vsprintf_void + flags += 1L << 26; +# endif +# else +# ifdef HAS_vsnprintf_void + flags += 1L << 26; +# endif +# endif +#else + flags += 1L << 24; +# ifdef NO_snprintf + flags += 1L << 25; +# ifdef HAS_sprintf_void + flags += 1L << 26; +# endif +# else +# ifdef HAS_snprintf_void + flags += 1L << 26; +# endif +# endif +#endif + return flags; +} + +#ifdef DEBUG + +# ifndef verbose +# define verbose 0 +# endif +int ZLIB_INTERNAL z_verbose = verbose; + +void ZLIB_INTERNAL z_error (m) + char *m; +{ + fprintf(stderr, "%s\n", m); + exit(1); +} +#endif + +/* exported to allow conversion of error code to string for compress() and + * uncompress() + */ +const char * ZEXPORT zError(err) + int err; +{ + return ERR_MSG(err); +} + +#if defined(_WIN32_WCE) + /* The Microsoft C Run-Time Library for Windows CE doesn't have + * errno. We define it as a global variable to simplify porting. + * Its value is always 0 and should not be used. + */ + int errno = 0; +#endif + +#ifndef HAVE_MEMCPY + +void ZLIB_INTERNAL zmemcpy(dest, source, len) + Bytef* dest; + const Bytef* source; + uInt len; +{ + if (len == 0) return; + do { + *dest++ = *source++; /* ??? to be unrolled */ + } while (--len != 0); +} + +int ZLIB_INTERNAL zmemcmp(s1, s2, len) + const Bytef* s1; + const Bytef* s2; + uInt len; +{ + uInt j; + + for (j = 0; j < len; j++) { + if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; + } + return 0; +} + +void ZLIB_INTERNAL zmemzero(dest, len) + Bytef* dest; + uInt len; +{ + if (len == 0) return; + do { + *dest++ = 0; /* ??? to be unrolled */ + } while (--len != 0); +} +#endif + +#ifndef Z_SOLO + +#ifdef SYS16BIT + +#ifdef __TURBOC__ +/* Turbo C in 16-bit mode */ + +# define MY_ZCALLOC + +/* Turbo C malloc() does not allow dynamic allocation of 64K bytes + * and farmalloc(64K) returns a pointer with an offset of 8, so we + * must fix the pointer. Warning: the pointer must be put back to its + * original form in order to free it, use zcfree(). + */ + +#define MAX_PTR 10 +/* 10*64K = 640K */ + +local int next_ptr = 0; + +typedef struct ptr_table_s { + voidpf org_ptr; + voidpf new_ptr; +} ptr_table; + +local ptr_table table[MAX_PTR]; +/* This table is used to remember the original form of pointers + * to large buffers (64K). Such pointers are normalized with a zero offset. + * Since MSDOS is not a preemptive multitasking OS, this table is not + * protected from concurrent access. This hack doesn't work anyway on + * a protected system like OS/2. Use Microsoft C instead. + */ + +voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size) +{ + voidpf buf = opaque; /* just to make some compilers happy */ + ulg bsize = (ulg)items*size; + + /* If we allocate less than 65520 bytes, we assume that farmalloc + * will return a usable pointer which doesn't have to be normalized. + */ + if (bsize < 65520L) { + buf = farmalloc(bsize); + if (*(ush*)&buf != 0) return buf; + } else { + buf = farmalloc(bsize + 16L); + } + if (buf == NULL || next_ptr >= MAX_PTR) return NULL; + table[next_ptr].org_ptr = buf; + + /* Normalize the pointer to seg:0 */ + *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; + *(ush*)&buf = 0; + table[next_ptr++].new_ptr = buf; + return buf; +} + +void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr) +{ + int n; + if (*(ush*)&ptr != 0) { /* object < 64K */ + farfree(ptr); + return; + } + /* Find the original pointer */ + for (n = 0; n < next_ptr; n++) { + if (ptr != table[n].new_ptr) continue; + + farfree(table[n].org_ptr); + while (++n < next_ptr) { + table[n-1] = table[n]; + } + next_ptr--; + return; + } + ptr = opaque; /* just to make some compilers happy */ + Assert(0, "zcfree: ptr not found"); +} + +#endif /* __TURBOC__ */ + + +#ifdef M_I86 +/* Microsoft C in 16-bit mode */ + +# define MY_ZCALLOC + +#if (!defined(_MSC_VER) || (_MSC_VER <= 600)) +# define _halloc halloc +# define _hfree hfree +#endif + +voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size) +{ + if (opaque) opaque = 0; /* to make compiler happy */ + return _halloc((long)items, size); +} + +void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr) +{ + if (opaque) opaque = 0; /* to make compiler happy */ + _hfree(ptr); +} + +#endif /* M_I86 */ + +#endif /* SYS16BIT */ + + +#ifndef MY_ZCALLOC /* Any system without a special alloc function */ + +#ifndef STDC +extern voidp malloc OF((uInt size)); +extern voidp calloc OF((uInt items, uInt size)); +extern void free OF((voidpf ptr)); +#endif + +voidpf ZLIB_INTERNAL zcalloc (opaque, items, size) + voidpf opaque; + unsigned items; + unsigned size; +{ + if (opaque) items += size - size; /* make compiler happy */ + return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : + (voidpf)calloc(items, size); +} + +void ZLIB_INTERNAL zcfree (opaque, ptr) + voidpf opaque; + voidpf ptr; +{ + free(ptr); + if (opaque) return; /* make compiler happy */ +} + +#endif /* MY_ZCALLOC */ + +#endif /* !Z_SOLO */ diff --git a/src/SDL2/external/zlib-1.2.8/zutil.h b/src/SDL2/external/zlib-1.2.8/zutil.h new file mode 100644 index 000000000..24ab06b1c --- /dev/null +++ b/src/SDL2/external/zlib-1.2.8/zutil.h @@ -0,0 +1,253 @@ +/* zutil.h -- internal interface and configuration of the compression library + * Copyright (C) 1995-2013 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* @(#) $Id$ */ + +#ifndef ZUTIL_H +#define ZUTIL_H + +#ifdef HAVE_HIDDEN +# define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) +#else +# define ZLIB_INTERNAL +#endif + +#include "zlib.h" + +#if defined(STDC) && !defined(Z_SOLO) +# if !(defined(_WIN32_WCE) && defined(_MSC_VER)) +# include +# endif +# include +# include +#endif + +#ifdef Z_SOLO + typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */ +#endif + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +typedef unsigned char uch; +typedef uch FAR uchf; +typedef unsigned short ush; +typedef ush FAR ushf; +typedef unsigned long ulg; + +extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ +/* (size given to avoid silly warnings with Visual C++) */ + +#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] + +#define ERR_RETURN(strm,err) \ + return (strm->msg = ERR_MSG(err), (err)) +/* To be used only when the state is known to be valid */ + + /* common constants */ + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + +#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ + + /* target dependencies */ + +#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32)) +# define OS_CODE 0x00 +# ifndef Z_SOLO +# if defined(__TURBOC__) || defined(__BORLANDC__) +# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) + /* Allow compilation with ANSI keywords only enabled */ + void _Cdecl farfree( void *block ); + void *_Cdecl farmalloc( unsigned long nbytes ); +# else +# include +# endif +# else /* MSC or DJGPP */ +# include +# endif +# endif +#endif + +#ifdef AMIGA +# define OS_CODE 0x01 +#endif + +#if defined(VAXC) || defined(VMS) +# define OS_CODE 0x02 +# define F_OPEN(name, mode) \ + fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") +#endif + +#if defined(ATARI) || defined(atarist) +# define OS_CODE 0x05 +#endif + +#ifdef OS2 +# define OS_CODE 0x06 +# if defined(M_I86) && !defined(Z_SOLO) +# include +# endif +#endif + +#if defined(MACOS) || defined(TARGET_OS_MAC) +# define OS_CODE 0x07 +# ifndef Z_SOLO +# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include /* for fdopen */ +# else +# ifndef fdopen +# define fdopen(fd,mode) NULL /* No fdopen() */ +# endif +# endif +# endif +#endif + +#ifdef TOPS20 +# define OS_CODE 0x0a +#endif + +#ifdef WIN32 +# ifndef __CYGWIN__ /* Cygwin is Unix, not Win32 */ +# define OS_CODE 0x0b +# endif +#endif + +#ifdef __50SERIES /* Prime/PRIMOS */ +# define OS_CODE 0x0f +#endif + +#if defined(_BEOS_) || defined(RISCOS) +# define fdopen(fd,mode) NULL /* No fdopen() */ +#endif + +#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX +# if defined(_WIN32_WCE) +# define fdopen(fd,mode) NULL /* No fdopen() */ +# ifndef _PTRDIFF_T_DEFINED + typedef int ptrdiff_t; +# define _PTRDIFF_T_DEFINED +# endif +# else +# define fdopen(fd,type) _fdopen(fd,type) +# endif +#endif + +#if defined(__BORLANDC__) && !defined(MSDOS) + #pragma warn -8004 + #pragma warn -8008 + #pragma warn -8066 +#endif + +/* provide prototypes for these when building zlib without LFS */ +#if !defined(_WIN32) && \ + (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0) + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); +#endif + + /* common defaults */ + +#ifndef OS_CODE +# define OS_CODE 0x03 /* assume Unix */ +#endif + +#ifndef F_OPEN +# define F_OPEN(name, mode) fopen((name), (mode)) +#endif + + /* functions */ + +#if defined(pyr) || defined(Z_SOLO) +# define NO_MEMCPY +#endif +#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) + /* Use our own functions for small and medium model with MSC <= 5.0. + * You may have to use the same strategy for Borland C (untested). + * The __SC__ check is for Symantec. + */ +# define NO_MEMCPY +#endif +#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) +# define HAVE_MEMCPY +#endif +#ifdef HAVE_MEMCPY +# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ +# define zmemcpy _fmemcpy +# define zmemcmp _fmemcmp +# define zmemzero(dest, len) _fmemset(dest, 0, len) +# else +# define zmemcpy memcpy +# define zmemcmp memcmp +# define zmemzero(dest, len) memset(dest, 0, len) +# endif +#else + void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len)); + int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len)); + void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len)); +#endif + +/* Diagnostic functions */ +#ifdef DEBUG +# include + extern int ZLIB_INTERNAL z_verbose; + extern void ZLIB_INTERNAL z_error OF((char *m)); +# define Assert(cond,msg) {if(!(cond)) z_error(msg);} +# define Trace(x) {if (z_verbose>=0) fprintf x ;} +# define Tracev(x) {if (z_verbose>0) fprintf x ;} +# define Tracevv(x) {if (z_verbose>1) fprintf x ;} +# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} +# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + +#ifndef Z_SOLO + voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items, + unsigned size)); + void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr)); +#endif + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) +#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} + +/* Reverse the bytes in a 32-bit value */ +#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ + (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) + +#endif /* ZUTIL_H */ diff --git a/src/SDL2/gcc-fat.sh b/src/SDL2/gcc-fat.sh new file mode 100755 index 000000000..1601c9db8 --- /dev/null +++ b/src/SDL2/gcc-fat.sh @@ -0,0 +1,103 @@ +#!/bin/sh +# +# Build Universal binaries on Mac OS X, thanks Ryan! +# +# Usage: ./configure CC="sh gcc-fat.sh" && make && rm -rf x86 x64 + +DEVELOPER="`xcode-select -print-path`/Platforms/MacOSX.platform/Developer" + +# Intel 32-bit compiler flags (10.6 runtime compatibility) +GCC_COMPILE_X86="gcc -arch i386 -mmacosx-version-min=10.6 \ +-DMAC_OS_X_VERSION_MIN_REQUIRED=1040 \ +-I/usr/local/include" + +GCC_LINK_X86="-mmacosx-version-min=10.6" + +# Intel 64-bit compiler flags (10.6 runtime compatibility) +GCC_COMPILE_X64="gcc -arch x86_64 -mmacosx-version-min=10.6 \ +-DMAC_OS_X_VERSION_MIN_REQUIRED=1050 \ +-I/usr/local/include" + +GCC_LINK_X64="-mmacosx-version-min=10.6" + +# Output both PowerPC and Intel object files +args="$*" +compile=yes +link=yes +while test x$1 != x; do + case $1 in + --version) exec gcc $1;; + -v) exec gcc $1;; + -V) exec gcc $1;; + -print-prog-name=*) exec gcc $1;; + -print-search-dirs) exec gcc $1;; + -E) GCC_COMPILE_X86="$GCC_COMPILE_X86 -E" + GCC_COMPILE_X64="$GCC_COMPILE_X64 -E" + compile=no; link=no;; + -c) link=no;; + -o) output=$2;; + *.c|*.cc|*.cpp|*.S) source=$1;; + esac + shift +done +if test x$link = xyes; then + GCC_COMPILE_X86="$GCC_COMPILE_X86 $GCC_LINK_X86" + GCC_COMPILE_X64="$GCC_COMPILE_X64 $GCC_LINK_X64" +fi +if test x"$output" = x; then + if test x$link = xyes; then + output=a.out + elif test x$compile = xyes; then + output=`echo $source | sed -e 's|.*/||' -e 's|\(.*\)\.[^\.]*|\1|'`.o + fi +fi + +# Compile X86 32-bit +if test x"$output" != x; then + dir=x86/`dirname $output` + if test -d $dir; then + : + else + mkdir -p $dir + fi +fi +set -- $args +while test x$1 != x; do + if test -f "x86/$1" && test "$1" != "$output"; then + x86_args="$x86_args x86/$1" + else + x86_args="$x86_args $1" + fi + shift +done +$GCC_COMPILE_X86 $x86_args || exit $? +if test x"$output" != x; then + cp $output x86/$output +fi + +# Compile X86 32-bit +if test x"$output" != x; then + dir=x64/`dirname $output` + if test -d $dir; then + : + else + mkdir -p $dir + fi +fi +set -- $args +while test x$1 != x; do + if test -f "x64/$1" && test "$1" != "$output"; then + x64_args="$x64_args x64/$1" + else + x64_args="$x64_args $1" + fi + shift +done +$GCC_COMPILE_X64 $x64_args || exit $? +if test x"$output" != x; then + cp $output x64/$output +fi + +if test x"$output" != x; then + lipo -create -o $output x86/$output x64/$output +fi diff --git a/src/SDL2/install-sh b/src/SDL2/install-sh new file mode 100755 index 000000000..4fbbae7b7 --- /dev/null +++ b/src/SDL2/install-sh @@ -0,0 +1,507 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2006-10-14.15 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +posix_glob= +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chmodcmd=$chmodprog +chowncmd= +chgrpcmd= +stripcmd= +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + shift + shift + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac +done + +if test $# -ne 0 && test -z "$dir_arg$dstarg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix=/ ;; + -*) prefix=./ ;; + *) prefix= ;; + esac + + case $posix_glob in + '') + if (set -f) 2>/dev/null; then + posix_glob=true + else + posix_glob=false + fi ;; + esac + + oIFS=$IFS + IFS=/ + $posix_glob && set -f + set fnord $dstdir + shift + $posix_glob && set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dst"; then + $doit $rmcmd -f "$dst" 2>/dev/null \ + || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \ + && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\ + || { + echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + } || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/src/SDL2/ltmain.sh b/src/SDL2/ltmain.sh new file mode 100644 index 000000000..5e04f0862 --- /dev/null +++ b/src/SDL2/ltmain.sh @@ -0,0 +1,8407 @@ +# Generated from ltmain.m4sh. + +# ltmain.sh (GNU libtool) 2.2.6 +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print informational messages (default) +# --version print version information +# -h, --help print short or long help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.2.6 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=2.2.6 +TIMESTAMP="" +package_revision=1.3012 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# NLS nuisances: We save the old values to restore during execute mode. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done + +$lt_unset CDPATH + + + + + +: ${CP="cp -f"} +: ${ECHO="echo"} +: ${EGREP="/usr/bin/grep -E"} +: ${FGREP="/usr/bin/grep -F"} +: ${GREP="/usr/bin/grep"} +: ${LN_S="ln -s"} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SED="/opt/local/bin/gsed"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + +# Generated shell functions inserted here. + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# The name of this program: +# In the unlikely event $progname began with a '-', it would play havoc with +# func_echo (imagine progname=-n), so we prepend ./ in that case: +func_dirname_and_basename "$progpath" +progname=$func_basename_result +case $progname in + -*) progname=./$progname ;; +esac + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=: + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname${mode+: }$mode: $*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` + done + my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "X$my_tmpdir" | $Xsed +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "X$1" | $Xsed \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + + + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $SED -n '/^# Usage:/,/# -h/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + $ECHO + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help +# Echo long help message to standard output and exit. +func_help () +{ + $SED -n '/^# Usage:/,/# Report bugs to/ { + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ + p + }' < "$progpath" + exit $? +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + func_error "missing argument for $1" + exit_cmd=exit +} + +exit_cmd=: + + + + + +# Check that we have a working $ECHO. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell, and then maybe $ECHO will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# Parse options once, thoroughly. This comes as soon as possible in +# the script to make things like `libtool --version' happen quickly. +{ + + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac + + # Parse non-mode specific arguments: + while test "$#" -gt 0; do + opt="$1" + shift + + case $opt in + --config) func_config ;; + + --debug) preserve_args="$preserve_args $opt" + func_echo "enabling shell trace mode" + opt_debug='set -x' + $opt_debug + ;; + + -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break + execute_dlfiles="$execute_dlfiles $1" + shift + ;; + + --dry-run | -n) opt_dry_run=: ;; + --features) func_features ;; + --finish) mode="finish" ;; + + --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break + case $1 in + # Valid mode arguments: + clean) ;; + compile) ;; + execute) ;; + finish) ;; + install) ;; + link) ;; + relink) ;; + uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; + esac + + mode="$1" + shift + ;; + + --preserve-dup-deps) + opt_duplicate_deps=: ;; + + --quiet|--silent) preserve_args="$preserve_args $opt" + opt_silent=: + ;; + + --verbose| -v) preserve_args="$preserve_args $opt" + opt_silent=false + ;; + + --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break + preserve_args="$preserve_args $opt $1" + func_enable_tag "$1" # tagname is set here + shift + ;; + + # Separate optargs to long options: + -dlopen=*|--mode=*|--tag=*) + func_opt_split "$opt" + set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} + shift + ;; + + -\?|-h) func_usage ;; + --help) opt_help=: ;; + --version) func_version ;; + + -*) func_fatal_help "unrecognized option \`$opt'" ;; + + *) nonopt="$opt" + break + ;; + esac + done + + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_duplicate_deps + ;; + esac + + # Having warned about all mis-specified options, bail out if + # anything was wrong. + $exit_cmd $EXIT_FAILURE +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +## ----------- ## +## Main. ## +## ----------- ## + +$opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + test -z "$mode" && func_fatal_error "error: you must specify a MODE." + + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$mode' for more information." +} + + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_ltwrapper_scriptname_result="" + if func_ltwrapper_executable_p "$1"; then + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + fi +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + case "$@ " in + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T <?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + removelist="$removelist $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + removelist="$removelist $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + command="$command -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + command="$command -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + command="$command$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { +test "$mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$mode'" + ;; + esac + + $ECHO + $ECHO "Try \`$progname --help' for more information about other modes." + + exit $? +} + + # Now that we've collected a possible --mode arg, show help if necessary + $opt_help && func_mode_help + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_quote_for_eval "$file" + args="$args $func_quote_for_eval_result" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + $ECHO "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + $ECHO "X----------------------------------------------------------------------" | $Xsed + $ECHO "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + $ECHO + $ECHO "If you ever happen to want to link against installed libraries" + $ECHO "in a given directory, LIBDIR, you must either use libtool, and" + $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" + $ECHO "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" + $ECHO " during execution" + fi + if test -n "$runpath_var"; then + $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" + $ECHO " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $ECHO + + $ECHO "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" + $ECHO "pages." + ;; + *) + $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + $ECHO "X----------------------------------------------------------------------" | $Xsed + exit $EXIT_SUCCESS +} + +test "$mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $ECHO "X$nonopt" | $GREP shtool >/dev/null; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + install_prog="$install_prog$func_quote_for_eval_result" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + install_prog="$install_prog $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_verbose "extracting global C symbols from \`$progfile'" + $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + $ECHO >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +" + case $host in + *cygwin* | *mingw* | *cegcc* ) + $ECHO >> "$output_objdir/$my_dlsyms" "\ +/* DATA imports from DLLs on WIN32 con't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs. */" + lt_dlsym_const= ;; + *osf5*) + echo >> "$output_objdir/$my_dlsyms" "\ +/* This system does not cope well with relocations in const data */" + lt_dlsym_const= ;; + *) + lt_dlsym_const=const ;; + esac + + $ECHO >> "$output_objdir/$my_dlsyms" "\ +extern $lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +$lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + $ECHO >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) symtab_cflags="$symtab_cflags $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + + +# func_emit_wrapper_part1 [arg=no] +# +# Emit the first part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part1 () +{ + func_emit_wrapper_part1_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part1_arg1=$1 + fi + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + ECHO=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$ECHO works! + : + else + # Restart under the correct shell, and then maybe \$ECHO will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $ECHO "\ + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done +" +} +# end: func_emit_wrapper_part1 + +# func_emit_wrapper_part2 [arg=no] +# +# Emit the second part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part2 () +{ + func_emit_wrapper_part2_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part2_arg1=$1 + fi + + $ECHO "\ + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} +# end: func_emit_wrapper_part2 + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=no + if test -n "$1" ; then + func_emit_wrapper_arg1=$1 + fi + + # split this up so that func_emit_cwrapperexe_src + # can call each part independently. + func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" + func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" +} + + +# func_to_host_path arg +# +# Convert paths to host format when used with build tools. +# Intended for use with "native" mingw (where libtool itself +# is running under the msys shell), or in the following cross- +# build environments: +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# where wine is equipped with the `winepath' executable. +# In the native mingw case, the (msys) shell automatically +# converts paths for any non-msys applications it launches, +# but that facility isn't available from inside the cwrapper. +# Similar accommodations are necessary for $host mingw and +# $build cygwin. Calling this function does no harm for other +# $host/$build combinations not listed above. +# +# ARG is the path (on $build) that should be converted to +# the proper representation for $host. The result is stored +# in $func_to_host_path_result. +func_to_host_path () +{ + func_to_host_path_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + case $build in + *mingw* ) # actually, msys + # awkward: cmd appends spaces to result + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_path_tmp1=`( cmd //c echo "$1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_path_tmp1=`cygpath -w "$1"` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # Unfortunately, winepath does not exit with a non-zero + # error code, so we are forced to check the contents of + # stdout. On the other hand, if the command is not + # found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both + # error code of zero AND non-empty stdout, which explains + # the odd construction: + func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + else + # Allow warning below. + func_to_host_path_result="" + fi + ;; + esac + if test -z "$func_to_host_path_result" ; then + #func_error "Could not determine host path corresponding to" + #func_error " '$1'" + #func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_path_result="$1" + fi + ;; + esac + fi +} +# end: func_to_host_path + +# func_to_host_pathlist arg +# +# Convert pathlists to host format when used with build tools. +# See func_to_host_path(), above. This function supports the +# following $build/$host combinations (but does no harm for +# combinations not listed here): +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# +# Path separators are also converted from $build format to +# $host format. If ARG begins or ends with a path separator +# character, it is preserved (but converted to $host format) +# on output. +# +# ARG is a pathlist (on $build) that should be converted to +# the proper representation on $host. The result is stored +# in $func_to_host_pathlist_result. +func_to_host_pathlist () +{ + func_to_host_pathlist_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_to_host_pathlist_tmp2="$1" + # Once set for this call, this variable should not be + # reassigned. It is used in tha fallback case. + func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e 's|^:*||' -e 's|:*$||'` + case $build in + *mingw* ) # Actually, msys. + # Awkward: cmd appends spaces to result. + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # unfortunately, winepath doesn't convert pathlists + func_to_host_pathlist_result="" + func_to_host_pathlist_oldIFS=$IFS + IFS=: + for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do + IFS=$func_to_host_pathlist_oldIFS + if test -n "$func_to_host_pathlist_f" ; then + func_to_host_path "$func_to_host_pathlist_f" + if test -n "$func_to_host_path_result" ; then + if test -z "$func_to_host_pathlist_result" ; then + func_to_host_pathlist_result="$func_to_host_path_result" + else + func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" + fi + fi + fi + IFS=: + done + IFS=$func_to_host_pathlist_oldIFS + ;; + esac + if test -z "$func_to_host_pathlist_result" ; then + func_error "Could not determine the host path(s) corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This may break if $1 contains DOS-style drive + # specifications. The fix is not to complicate the expression + # below, but for the user to provide a working wine installation + # with winepath so that path translation in the cross-to-mingw + # case works properly. + lt_replace_pathsep_nix_to_dos="s|:|;|g" + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_replace_pathsep_nix_to_dos"` + fi + # Now, add the leading and trailing path separators back + case "$1" in + :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" + ;; + esac + case "$1" in + *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" + ;; + esac + ;; + esac + fi +} +# end: func_to_host_pathlist + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +# define setmode _setmode +#else +# include +# include +# ifdef __CYGWIN__ +# include +# define HAVE_SETENV +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +#ifdef _MSC_VER +# define S_IXUSR _S_IEXEC +# define stat _stat +# ifndef _INTPTR_T_DEFINED +# define intptr_t int +# endif +#endif + +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifdef __CYGWIN__ +# define FOPEN_WB "wb" +#endif + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#undef LTWRAPPER_DEBUGPRINTF +#if defined DEBUGWRAPPER +# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args +static void +ltwrapper_debugprintf (const char *fmt, ...) +{ + va_list args; + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); +} +#else +# define LTWRAPPER_DEBUGPRINTF(args) +#endif + +const char *program_name = NULL; + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_fatal (const char *message, ...); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_opt_process_env_set (const char *arg); +void lt_opt_process_env_prepend (const char *arg); +void lt_opt_process_env_append (const char *arg); +int lt_split_name_value (const char *arg, char** name, char** value); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); + +static const char *script_text_part1 = +EOF + + func_emit_wrapper_part1 yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ "/' -e 's/$/\\n"/' + echo ";" + cat <"))); + for (i = 0; i < newargc; i++) + { + LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : ""))); + } + +EOF + + case $host_os in + mingw*) + cat <<"EOF" + /* execv doesn't actually work on mingw as expected on unix */ + rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); + if (rval == -1) + { + /* failed to start process */ + LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); + return 127; + } + return rval; +EOF + ;; + *) + cat <<"EOF" + execv (lt_argv_zero, newargz); + return rval; /* =127, but avoids unused variable warning */ +EOF + ;; + esac + + cat <<"EOF" +} + +void * +xmalloc (size_t num) +{ + void *p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), + string) : NULL; +} + +const char * +base_name (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char) name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} + +int +check_executable (const char *path) +{ + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", + wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", + tmp_pathspec)); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + char *errstr = strerror (errno); + lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal ("Could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} + +void +lt_setenv (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", + (name ? name : ""), + (value ? value : ""))); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +int +lt_split_name_value (const char *arg, char** name, char** value) +{ + const char *p; + int len; + if (!arg || !*arg) + return 1; + + p = strchr (arg, (int)'='); + + if (!p) + return 1; + + *value = xstrdup (++p); + + len = strlen (arg) - strlen (*value); + *name = XMALLOC (char, len); + strncpy (*name, arg, len-1); + (*name)[len - 1] = '\0'; + + return 0; +} + +void +lt_opt_process_env_set (const char *arg) +{ + char *name = NULL; + char *value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); + } + + lt_setenv (name, value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_prepend (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_append (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 1); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + + +EOF +} +# end: func_emit_cwrapperexe_src + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) deplibs="$deplibs $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + weak_libs="$weak_libs $arg" + prev= + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname '-L' '' "$arg" + dir=$func_stripname_result + if test -z "$dir"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" + linker_flags="$linker_flags $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -F/path gives path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC + # @file GCC response files + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_duplicate_deps ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + case $lib in + *.la) func_source "$lib" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` + case " $weak_libs " in + *" $deplib_base "*) ;; + *) deplibs="$deplibs $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + compiler_flags="$compiler_flags $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + dir=$func_stripname_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + $ECHO + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because the file extensions .$libext of this argument makes me believe" + $ECHO "*** that it is just a static archive that I should not use here." + else + $ECHO + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) temp_rpath="$temp_rpath$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + notinst_deplibs="$notinst_deplibs $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + $ECHO + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $ECHO + $ECHO "*** And there doesn't seem to be a static archive available" + $ECHO "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + $ECHO + $ECHO "*** Warning: This system can not link to static lib archive $lib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + $ECHO "*** But as you try to build a module library, libtool will still create " + $ECHO "*** a static module, that should work as long as the dlopening application" + $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_dirname "$deplib" "" "." + dir="$func_dirname_result" + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + $ECHO + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + libobjs="$libobjs $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` + # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` + # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $ECHO + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $ECHO + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ + -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` + done + fi + if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | + $GREP . >/dev/null; then + $ECHO + if test "X$deplibs_check_method" = "Xnone"; then + $ECHO "*** Warning: inter-library dependencies are not supported in this platform." + else + $ECHO "*** Warning: inter-library dependencies are not known to be supported." + fi + $ECHO "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + $ECHO + $ECHO "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + $ECHO "*** a static module, that should work as long as the dlopening" + $ECHO "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + $ECHO "*** The inter-library dependencies that have been dropped here will be" + $ECHO "*** automatically added whenever a program is linked with this library" + $ECHO "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + $ECHO + $ECHO "*** Since this library must not contain undefined symbols," + $ECHO "*** because either the platform does not support them or" + $ECHO "*** it was explicitly requested with -no-undefined," + $ECHO "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + delfiles="$delfiles $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + func_len " $cmd" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + output_la=`$ECHO "X$output" | $Xsed -e "$basename"` + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + $ECHO 'INPUT (' > $output + for obj in $save_libobjs + do + $ECHO "$obj" >> $output + done + $ECHO ')' >> $output + delfiles="$delfiles $output" + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + $ECHO "$obj" >> $output + done + delfiles="$delfiles $output" + output=$firstobj\"$file_list_spec$output\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=$obj + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + delfiles="$delfiles $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" + + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=yes + case $host in + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *cegcc) + # Disable wrappers for cegcc, we are cross compiling anyway. + wrappers_required=no + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + + exit $exit_status + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $ECHO for shipping. + if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + oldobjs="$oldobjs $symfileobj" + fi + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $addlibs + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $ECHO "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" + ;; + *) oldobjs="$oldobjs $obj" ;; + esac + done + fi + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlfiles="$newdlfiles $libdir/$name" + ;; + *) newdlfiles="$newdlfiles $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlprefiles="$newdlprefiles $libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +{ test "$mode" = link || test "$mode" = relink; } && + func_mode_link ${1+"$@"} + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) RM="$RM $arg"; rmforce=yes ;; + -*) RM="$RM $arg" ;; + *) files="$files $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + origobjdir="$objdir" + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi + func_basename "$file" + name="$func_basename_result" + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + + case "$mode" in + clean) + case " $library_names " in + # " " in the beginning catches empty $dlname + *" $dlname "*) ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; + esac + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + rmfiles="$rmfiles $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +{ test "$mode" = uninstall || test "$mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +test -z "$mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: +# vi:sw=2 + diff --git a/src/SDL2/miniz.h b/src/SDL2/miniz.h new file mode 100644 index 000000000..ea53c2fa4 --- /dev/null +++ b/src/SDL2/miniz.h @@ -0,0 +1,4771 @@ +/* miniz.c v1.14 - public domain deflate/inflate, zlib-subset, ZIP reading/writing/appending, PNG writing + See "unlicense" statement at the end of this file. + Rich Geldreich , last updated May 20, 2012 + Implements RFC 1950: http://www.ietf.org/rfc/rfc1950.txt and RFC 1951: http://www.ietf.org/rfc/rfc1951.txt + + Most API's defined in miniz.c are optional. For example, to disable the archive related functions just define + MINIZ_NO_ARCHIVE_APIS, or to get rid of all stdio usage define MINIZ_NO_STDIO (see the list below for more macros). + + * Change History + 5/20/12 v1.14 - MinGW32/64 GCC 4.6.1 compiler fixes: added MZ_FORCEINLINE, #include (thanks fermtect). + 5/19/12 v1.13 - From jason@cornsyrup.org and kelwert@mtu.edu - Fix mz_crc32() so it doesn't compute the wrong CRC-32's when mz_ulong is 64-bit. + Temporarily/locally slammed in "typedef unsigned long mz_ulong" and re-ran a randomized regression test on ~500k files. + Eliminated a bunch of warnings when compiling with GCC 32-bit/64. + Ran all examples, miniz.c, and tinfl.c through MSVC 2008's /analyze (static analysis) option and fixed all warnings (except for the silly + "Use of the comma-operator in a tested expression.." analysis warning, which I purposely use to work around a MSVC compiler warning). + Created 32-bit and 64-bit Codeblocks projects/workspace. Built and tested Linux executables. The codeblocks workspace is compatible with Linux+Win32/x64. + Added miniz_tester solution/project, which is a useful little app derived from LZHAM's tester app that I use as part of the regression test. + Ran miniz.c and tinfl.c through another series of regression testing on ~500,000 files and archives. + Modified example5.c so it purposely disables a bunch of high-level functionality (MINIZ_NO_STDIO, etc.). (Thanks to corysama for the MINIZ_NO_STDIO bug report.) + Fix ftell() usage in examples so they exit with an error on files which are too large (a limitation of the examples, not miniz itself). + 4/12/12 v1.12 - More comments, added low-level example5.c, fixed a couple minor level_and_flags issues in the archive API's. + level_and_flags can now be set to MZ_DEFAULT_COMPRESSION. Thanks to Bruce Dawson for the feedback/bug report. + 5/28/11 v1.11 - Added statement from unlicense.org + 5/27/11 v1.10 - Substantial compressor optimizations: + Level 1 is now ~4x faster than before. The L1 compressor's throughput now varies between 70-110MB/sec. on a + Core i7 (actual throughput varies depending on the type of data, and x64 vs. x86). + Improved baseline L2-L9 compression perf. Also, greatly improved compression perf. issues on some file types. + Refactored the compression code for better readability and maintainability. + Added level 10 compression level (L10 has slightly better ratio than level 9, but could have a potentially large + drop in throughput on some files). + 5/15/11 v1.09 - Initial stable release. + + * Low-level Deflate/Inflate implementation notes: + + Compression: Use the "tdefl" API's. The compressor supports raw, static, and dynamic blocks, lazy or + greedy parsing, match length filtering, RLE-only, and Huffman-only streams. It performs and compresses + approximately as well as zlib. + + Decompression: Use the "tinfl" API's. The entire decompressor is implemented as a single function + coroutine: see tinfl_decompress(). It supports decompression into a 32KB (or larger power of 2) wrapping buffer, or into a memory + block large enough to hold the entire file. + + The low-level tdefl/tinfl API's do not make any use of dynamic memory allocation. + + * zlib-style API notes: + + miniz.c implements a fairly large subset of zlib. There's enough functionality present for it to be a drop-in + zlib replacement in many apps: + The z_stream struct, optional memory allocation callbacks + deflateInit/deflateInit2/deflate/deflateReset/deflateEnd/deflateBound + inflateInit/inflateInit2/inflate/inflateEnd + compress, compress2, compressBound, uncompress + CRC-32, Adler-32 - Using modern, minimal code size, CPU cache friendly routines. + Supports raw deflate streams or standard zlib streams with adler-32 checking. + + Limitations: + The callback API's are not implemented yet. No support for gzip headers or zlib static dictionaries. + I've tried to closely emulate zlib's various flavors of stream flushing and return status codes, but + there are no guarantees that miniz.c pulls this off perfectly. + + * PNG writing: See the tdefl_write_image_to_png_file_in_memory() function, originally written by + Alex Evans. Supports 1-4 bytes/pixel images. + + * ZIP archive API notes: + + The ZIP archive API's where designed with simplicity and efficiency in mind, with just enough abstraction to + get the job done with minimal fuss. There are simple API's to retrieve file information, read files from + existing archives, create new archives, append new files to existing archives, or clone archive data from + one archive to another. It supports archives located in memory or the heap, on disk (using stdio.h), + or you can specify custom file read/write callbacks. + + - Archive reading: Just call this function to read a single file from a disk archive: + + void *mz_zip_extract_archive_file_to_heap(const char *pZip_filename, const char *pArchive_name, + size_t *pSize, mz_uint zip_flags); + + For more complex cases, use the "mz_zip_reader" functions. Upon opening an archive, the entire central + directory is located and read as-is into memory, and subsequent file access only occurs when reading individual files. + + - Archives file scanning: The simple way is to use this function to scan a loaded archive for a specific file: + + int mz_zip_reader_locate_file(mz_zip_archive *pZip, const char *pName, const char *pComment, mz_uint flags); + + The locate operation can optionally check file comments too, which (as one example) can be used to identify + multiple versions of the same file in an archive. This function uses a simple linear search through the central + directory, so it's not very fast. + + Alternately, you can iterate through all the files in an archive (using mz_zip_reader_get_num_files()) and + retrieve detailed info on each file by calling mz_zip_reader_file_stat(). + + - Archive creation: Use the "mz_zip_writer" functions. The ZIP writer immediately writes compressed file data + to disk and builds an exact image of the central directory in memory. The central directory image is written + all at once at the end of the archive file when the archive is finalized. + + The archive writer can optionally align each file's local header and file data to any power of 2 alignment, + which can be useful when the archive will be read from optical media. Also, the writer supports placing + arbitrary data blobs at the very beginning of ZIP archives. Archives written using either feature are still + readable by any ZIP tool. + + - Archive appending: The simple way to add a single file to an archive is to call this function: + + mz_bool mz_zip_add_mem_to_archive_file_in_place(const char *pZip_filename, const char *pArchive_name, + const void *pBuf, size_t buf_size, const void *pComment, mz_uint16 comment_size, mz_uint level_and_flags); + + The archive will be created if it doesn't already exist, otherwise it'll be appended to. + Note the appending is done in-place and is not an atomic operation, so if something goes wrong + during the operation it's possible the archive could be left without a central directory (although the local + file headers and file data will be fine, so the archive will be recoverable). + + For more complex archive modification scenarios: + 1. The safest way is to use a mz_zip_reader to read the existing archive, cloning only those bits you want to + preserve into a new archive using using the mz_zip_writer_add_from_zip_reader() function (which compiles the + compressed file data as-is). When you're done, delete the old archive and rename the newly written archive, and + you're done. This is safe but requires a bunch of temporary disk space or heap memory. + + 2. Or, you can convert an mz_zip_reader in-place to an mz_zip_writer using mz_zip_writer_init_from_reader(), + append new files as needed, then finalize the archive which will write an updated central directory to the + original archive. (This is basically what mz_zip_add_mem_to_archive_file_in_place() does.) There's a + possibility that the archive's central directory could be lost with this method if anything goes wrong, though. + + - ZIP archive support limitations: + No zip64 or spanning support. Extraction functions can only handle unencrypted, stored or deflated files. + Requires streams capable of seeking. + + * This is a header file library, like stb_image.c. To get only a header file, either cut and paste the + below header, or create miniz.h, #define MINIZ_HEADER_FILE_ONLY, and then include miniz.c from it. + + * Important: For best perf. be sure to customize the below macros for your target platform: + #define MINIZ_USE_UNALIGNED_LOADS_AND_STORES 1 + #define MINIZ_LITTLE_ENDIAN 1 + #define MINIZ_HAS_64BIT_REGISTERS 1 +*/ + +#ifndef MINIZ_HEADER_INCLUDED +#define MINIZ_HEADER_INCLUDED + +#include + +#if !defined(MINIZ_NO_TIME) && !defined(MINIZ_NO_ARCHIVE_APIS) +#include +#endif + +// Defines to completely disable specific portions of miniz.c: +// If all macros here are defined the only functionality remaining will be CRC-32, adler-32, tinfl, and tdefl. + +// Define MINIZ_NO_STDIO to disable all usage and any functions which rely on stdio for file I/O. +#define MINIZ_NO_STDIO + +// If MINIZ_NO_TIME is specified then the ZIP archive functions will not be able to get the current time, or +// get/set file times. +#define MINIZ_NO_TIME + +// Define MINIZ_NO_ARCHIVE_APIS to disable all ZIP archive API's. +#define MINIZ_NO_ARCHIVE_APIS + +// Define MINIZ_NO_ARCHIVE_APIS to disable all writing related ZIP archive API's. +#define MINIZ_NO_ARCHIVE_WRITING_APIS + +// Define MINIZ_NO_ZLIB_APIS to remove all ZLIB-style compression/decompression API's. +#define MINIZ_NO_ZLIB_APIS + +// Define MINIZ_NO_ZLIB_COMPATIBLE_NAME to disable zlib names, to prevent conflicts against stock zlib. +#define MINIZ_NO_ZLIB_COMPATIBLE_NAMES + +// Define MINIZ_NO_MALLOC to disable all calls to malloc, free, and realloc. +// Note if MINIZ_NO_MALLOC is defined then the user must always provide custom user alloc/free/realloc +// callbacks to the zlib and archive API's, and a few stand-alone helper API's which don't provide custom user +// functions (such as tdefl_compress_mem_to_heap() and tinfl_decompress_mem_to_heap()) won't work. +//#define MINIZ_NO_MALLOC +#define MINIZ_SDL_MALLOC + +#if defined(_M_IX86) || defined(_M_X64) || defined(__i386__) || defined(__i386) || defined(__i486__) || defined(__i486) || defined(i386) || defined(__ia64__) || defined(__x86_64__) +// MINIZ_X86_OR_X64_CPU is only used to help set the below macros. +#define MINIZ_X86_OR_X64_CPU 1 +#endif + +#if (__BYTE_ORDER__==__ORDER_LITTLE_ENDIAN__) || MINIZ_X86_OR_X64_CPU +// Set MINIZ_LITTLE_ENDIAN to 1 if the processor is little endian. +#define MINIZ_LITTLE_ENDIAN 1 +#endif + +#if MINIZ_X86_OR_X64_CPU +// Set MINIZ_USE_UNALIGNED_LOADS_AND_STORES to 1 on CPU's that permit efficient integer loads and stores from unaligned addresses. +#define MINIZ_USE_UNALIGNED_LOADS_AND_STORES 1 +#endif + +#if defined(_M_X64) || defined(_WIN64) || defined(__MINGW64__) || defined(_LP64) || defined(__LP64__) || defined(__ia64__) || defined(__x86_64__) +// Set MINIZ_HAS_64BIT_REGISTERS to 1 if operations on 64-bit integers are reasonably fast (and don't involve compiler generated calls to helper functions). +#define MINIZ_HAS_64BIT_REGISTERS 1 +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +// ------------------- zlib-style API Definitions. + +// For more compatibility with zlib, miniz.c uses unsigned long for some parameters/struct members. Beware: mz_ulong can be either 32 or 64-bits! +typedef unsigned long mz_ulong; + +// Heap allocation callbacks. +// Note that mz_alloc_func parameter types purpsosely differ from zlib's: items/size is size_t, not unsigned long. +typedef void *(*mz_alloc_func)(void *opaque, size_t items, size_t size); +typedef void (*mz_free_func)(void *opaque, void *address); +typedef void *(*mz_realloc_func)(void *opaque, void *address, size_t items, size_t size); + +#define MZ_ADLER32_INIT (1) +// mz_adler32() returns the initial adler-32 value to use when called with ptr==NULL. +mz_ulong mz_adler32(mz_ulong adler, const unsigned char *ptr, size_t buf_len); + +#define MZ_CRC32_INIT (0) +// mz_crc32() returns the initial CRC-32 value to use when called with ptr==NULL. +mz_ulong mz_crc32(mz_ulong crc, const unsigned char *ptr, size_t buf_len); + +// Compression strategies. +enum { MZ_DEFAULT_STRATEGY = 0, MZ_FILTERED = 1, MZ_HUFFMAN_ONLY = 2, MZ_RLE = 3, MZ_FIXED = 4 }; + +// Method +#define MZ_DEFLATED 8 + +#ifndef MINIZ_NO_ZLIB_APIS + +#define MZ_VERSION "9.1.14" +#define MZ_VERNUM 0x91E0 +#define MZ_VER_MAJOR 9 +#define MZ_VER_MINOR 1 +#define MZ_VER_REVISION 14 +#define MZ_VER_SUBREVISION 0 + +// Flush values. For typical usage you only need MZ_NO_FLUSH and MZ_FINISH. The other values are for advanced use (refer to the zlib docs). +enum { MZ_NO_FLUSH = 0, MZ_PARTIAL_FLUSH = 1, MZ_SYNC_FLUSH = 2, MZ_FULL_FLUSH = 3, MZ_FINISH = 4, MZ_BLOCK = 5 }; + +// Return status codes. MZ_PARAM_ERROR is non-standard. +enum { MZ_OK = 0, MZ_STREAM_END = 1, MZ_NEED_DICT = 2, MZ_ERRNO = -1, MZ_STREAM_ERROR = -2, MZ_DATA_ERROR = -3, MZ_MEM_ERROR = -4, MZ_BUF_ERROR = -5, MZ_VERSION_ERROR = -6, MZ_PARAM_ERROR = -10000 }; + +// Compression levels: 0-9 are the standard zlib-style levels, 10 is best possible compression (not zlib compatible, and may be very slow), MZ_DEFAULT_COMPRESSION=MZ_DEFAULT_LEVEL. +enum { MZ_NO_COMPRESSION = 0, MZ_BEST_SPEED = 1, MZ_BEST_COMPRESSION = 9, MZ_UBER_COMPRESSION = 10, MZ_DEFAULT_LEVEL = 6, MZ_DEFAULT_COMPRESSION = -1 }; + +// Window bits +#define MZ_DEFAULT_WINDOW_BITS 15 + +struct mz_internal_state; + +// Compression/decompression stream struct. +typedef struct mz_stream_s +{ + const unsigned char *next_in; // pointer to next byte to read + unsigned int avail_in; // number of bytes available at next_in + mz_ulong total_in; // total number of bytes consumed so far + + unsigned char *next_out; // pointer to next byte to write + unsigned int avail_out; // number of bytes that can be written to next_out + mz_ulong total_out; // total number of bytes produced so far + + char *msg; // error msg (unused) + struct mz_internal_state *state; // internal state, allocated by zalloc/zfree + + mz_alloc_func zalloc; // optional heap allocation function (defaults to malloc) + mz_free_func zfree; // optional heap free function (defaults to free) + void *opaque; // heap alloc function user pointer + + int data_type; // data_type (unused) + mz_ulong adler; // adler32 of the source or uncompressed data + mz_ulong reserved; // not used +} mz_stream; + +typedef mz_stream *mz_streamp; + +// Returns the version string of miniz.c. +const char *mz_version(void); + +// mz_deflateInit() initializes a compressor with default options: +// Parameters: +// pStream must point to an initialized mz_stream struct. +// level must be between [MZ_NO_COMPRESSION, MZ_BEST_COMPRESSION]. +// level 1 enables a specially optimized compression function that's been optimized purely for performance, not ratio. +// (This special func. is currently only enabled when MINIZ_USE_UNALIGNED_LOADS_AND_STORES and MINIZ_LITTLE_ENDIAN are defined.) +// Return values: +// MZ_OK on success. +// MZ_STREAM_ERROR if the stream is bogus. +// MZ_PARAM_ERROR if the input parameters are bogus. +// MZ_MEM_ERROR on out of memory. +int mz_deflateInit(mz_streamp pStream, int level); + +// mz_deflateInit2() is like mz_deflate(), except with more control: +// Additional parameters: +// method must be MZ_DEFLATED +// window_bits must be MZ_DEFAULT_WINDOW_BITS (to wrap the deflate stream with zlib header/adler-32 footer) or -MZ_DEFAULT_WINDOW_BITS (raw deflate/no header or footer) +// mem_level must be between [1, 9] (it's checked but ignored by miniz.c) +int mz_deflateInit2(mz_streamp pStream, int level, int method, int window_bits, int mem_level, int strategy); + +// Quickly resets a compressor without having to reallocate anything. Same as calling mz_deflateEnd() followed by mz_deflateInit()/mz_deflateInit2(). +int mz_deflateReset(mz_streamp pStream); + +// mz_deflate() compresses the input to output, consuming as much of the input and producing as much output as possible. +// Parameters: +// pStream is the stream to read from and write to. You must initialize/update the next_in, avail_in, next_out, and avail_out members. +// flush may be MZ_NO_FLUSH, MZ_PARTIAL_FLUSH/MZ_SYNC_FLUSH, MZ_FULL_FLUSH, or MZ_FINISH. +// Return values: +// MZ_OK on success (when flushing, or if more input is needed but not available, and/or there's more output to be written but the output buffer is full). +// MZ_STREAM_END if all input has been consumed and all output bytes have been written. Don't call mz_deflate() on the stream anymore. +// MZ_STREAM_ERROR if the stream is bogus. +// MZ_PARAM_ERROR if one of the parameters is invalid. +// MZ_BUF_ERROR if no forward progress is possible because the input and/or output buffers are empty. (Fill up the input buffer or free up some output space and try again.) +int mz_deflate(mz_streamp pStream, int flush); + +// mz_deflateEnd() deinitializes a compressor: +// Return values: +// MZ_OK on success. +// MZ_STREAM_ERROR if the stream is bogus. +int mz_deflateEnd(mz_streamp pStream); + +// mz_deflateBound() returns a (very) conservative upper bound on the amount of data that could be generated by deflate(), assuming flush is set to only MZ_NO_FLUSH or MZ_FINISH. +mz_ulong mz_deflateBound(mz_streamp pStream, mz_ulong source_len); + +// Single-call compression functions mz_compress() and mz_compress2(): +// Returns MZ_OK on success, or one of the error codes from mz_deflate() on failure. +int mz_compress(unsigned char *pDest, mz_ulong *pDest_len, const unsigned char *pSource, mz_ulong source_len); +int mz_compress2(unsigned char *pDest, mz_ulong *pDest_len, const unsigned char *pSource, mz_ulong source_len, int level); + +// mz_compressBound() returns a (very) conservative upper bound on the amount of data that could be generated by calling mz_compress(). +mz_ulong mz_compressBound(mz_ulong source_len); + +// Initializes a decompressor. +int mz_inflateInit(mz_streamp pStream); + +// mz_inflateInit2() is like mz_inflateInit() with an additional option that controls the window size and whether or not the stream has been wrapped with a zlib header/footer: +// window_bits must be MZ_DEFAULT_WINDOW_BITS (to parse zlib header/footer) or -MZ_DEFAULT_WINDOW_BITS (raw deflate). +int mz_inflateInit2(mz_streamp pStream, int window_bits); + +// Decompresses the input stream to the output, consuming only as much of the input as needed, and writing as much to the output as possible. +// Parameters: +// pStream is the stream to read from and write to. You must initialize/update the next_in, avail_in, next_out, and avail_out members. +// flush may be MZ_NO_FLUSH, MZ_SYNC_FLUSH, or MZ_FINISH. +// On the first call, if flush is MZ_FINISH it's assumed the input and output buffers are both sized large enough to decompress the entire stream in a single call (this is slightly faster). +// MZ_FINISH implies that there are no more source bytes available beside what's already in the input buffer, and that the output buffer is large enough to hold the rest of the decompressed data. +// Return values: +// MZ_OK on success. Either more input is needed but not available, and/or there's more output to be written but the output buffer is full. +// MZ_STREAM_END if all needed input has been consumed and all output bytes have been written. For zlib streams, the adler-32 of the decompressed data has also been verified. +// MZ_STREAM_ERROR if the stream is bogus. +// MZ_DATA_ERROR if the deflate stream is invalid. +// MZ_PARAM_ERROR if one of the parameters is invalid. +// MZ_BUF_ERROR if no forward progress is possible because the input buffer is empty but the inflater needs more input to continue, or if the output buffer is not large enough. Call mz_inflate() again +// with more input data, or with more room in the output buffer (except when using single call decompression, described above). +int mz_inflate(mz_streamp pStream, int flush); + +// Deinitializes a decompressor. +int mz_inflateEnd(mz_streamp pStream); + +// Single-call decompression. +// Returns MZ_OK on success, or one of the error codes from mz_inflate() on failure. +int mz_uncompress(unsigned char *pDest, mz_ulong *pDest_len, const unsigned char *pSource, mz_ulong source_len); + +// Returns a string description of the specified error code, or NULL if the error code is invalid. +const char *mz_error(int err); + +// Redefine zlib-compatible names to miniz equivalents, so miniz.c can be used as a drop-in replacement for the subset of zlib that miniz.c supports. +// Define MINIZ_NO_ZLIB_COMPATIBLE_NAMES to disable zlib-compatibility if you use zlib in the same project. +#ifndef MINIZ_NO_ZLIB_COMPATIBLE_NAMES + typedef unsigned char Byte; + typedef unsigned int uInt; + typedef mz_ulong uLong; + typedef Byte Bytef; + typedef uInt uIntf; + typedef char charf; + typedef int intf; + typedef void *voidpf; + typedef uLong uLongf; + typedef void *voidp; + typedef void *const voidpc; + #define Z_NULL 0 + #define Z_NO_FLUSH MZ_NO_FLUSH + #define Z_PARTIAL_FLUSH MZ_PARTIAL_FLUSH + #define Z_SYNC_FLUSH MZ_SYNC_FLUSH + #define Z_FULL_FLUSH MZ_FULL_FLUSH + #define Z_FINISH MZ_FINISH + #define Z_BLOCK MZ_BLOCK + #define Z_OK MZ_OK + #define Z_STREAM_END MZ_STREAM_END + #define Z_NEED_DICT MZ_NEED_DICT + #define Z_ERRNO MZ_ERRNO + #define Z_STREAM_ERROR MZ_STREAM_ERROR + #define Z_DATA_ERROR MZ_DATA_ERROR + #define Z_MEM_ERROR MZ_MEM_ERROR + #define Z_BUF_ERROR MZ_BUF_ERROR + #define Z_VERSION_ERROR MZ_VERSION_ERROR + #define Z_PARAM_ERROR MZ_PARAM_ERROR + #define Z_NO_COMPRESSION MZ_NO_COMPRESSION + #define Z_BEST_SPEED MZ_BEST_SPEED + #define Z_BEST_COMPRESSION MZ_BEST_COMPRESSION + #define Z_DEFAULT_COMPRESSION MZ_DEFAULT_COMPRESSION + #define Z_DEFAULT_STRATEGY MZ_DEFAULT_STRATEGY + #define Z_FILTERED MZ_FILTERED + #define Z_HUFFMAN_ONLY MZ_HUFFMAN_ONLY + #define Z_RLE MZ_RLE + #define Z_FIXED MZ_FIXED + #define Z_DEFLATED MZ_DEFLATED + #define Z_DEFAULT_WINDOW_BITS MZ_DEFAULT_WINDOW_BITS + #define alloc_func mz_alloc_func + #define free_func mz_free_func + #define internal_state mz_internal_state + #define z_stream mz_stream + #define deflateInit mz_deflateInit + #define deflateInit2 mz_deflateInit2 + #define deflateReset mz_deflateReset + #define deflate mz_deflate + #define deflateEnd mz_deflateEnd + #define deflateBound mz_deflateBound + #define compress mz_compress + #define compress2 mz_compress2 + #define compressBound mz_compressBound + #define inflateInit mz_inflateInit + #define inflateInit2 mz_inflateInit2 + #define inflate mz_inflate + #define inflateEnd mz_inflateEnd + #define uncompress mz_uncompress + #define crc32 mz_crc32 + #define adler32 mz_adler32 + #define MAX_WBITS 15 + #define MAX_MEM_LEVEL 9 + #define zError mz_error + #define ZLIB_VERSION MZ_VERSION + #define ZLIB_VERNUM MZ_VERNUM + #define ZLIB_VER_MAJOR MZ_VER_MAJOR + #define ZLIB_VER_MINOR MZ_VER_MINOR + #define ZLIB_VER_REVISION MZ_VER_REVISION + #define ZLIB_VER_SUBREVISION MZ_VER_SUBREVISION + #define zlibVersion mz_version + #define zlib_version mz_version() +#endif // #ifndef MINIZ_NO_ZLIB_COMPATIBLE_NAMES + +#endif // MINIZ_NO_ZLIB_APIS + +// ------------------- Types and macros + +typedef unsigned char mz_uint8; +typedef signed short mz_int16; +typedef unsigned short mz_uint16; +typedef unsigned int mz_uint32; +typedef unsigned int mz_uint; +typedef long long mz_int64; +typedef unsigned long long mz_uint64; +typedef int mz_bool; + +#define MZ_FALSE (0) +#define MZ_TRUE (1) + +// Works around MSVC's spammy "warning C4127: conditional expression is constant" message. +#ifdef _MSC_VER + #define MZ_MACRO_END while (0, 0) +#else + #define MZ_MACRO_END while (0) +#endif + +// ------------------- ZIP archive reading/writing + +#ifndef MINIZ_NO_ARCHIVE_APIS + +enum +{ + MZ_ZIP_MAX_IO_BUF_SIZE = 64*1024, + MZ_ZIP_MAX_ARCHIVE_FILENAME_SIZE = 260, + MZ_ZIP_MAX_ARCHIVE_FILE_COMMENT_SIZE = 256 +}; + +typedef struct +{ + mz_uint32 m_file_index; + mz_uint32 m_central_dir_ofs; + mz_uint16 m_version_made_by; + mz_uint16 m_version_needed; + mz_uint16 m_bit_flag; + mz_uint16 m_method; +#ifndef MINIZ_NO_TIME + time_t m_time; +#endif + mz_uint32 m_crc32; + mz_uint64 m_comp_size; + mz_uint64 m_uncomp_size; + mz_uint16 m_internal_attr; + mz_uint32 m_external_attr; + mz_uint64 m_local_header_ofs; + mz_uint32 m_comment_size; + char m_filename[MZ_ZIP_MAX_ARCHIVE_FILENAME_SIZE]; + char m_comment[MZ_ZIP_MAX_ARCHIVE_FILE_COMMENT_SIZE]; +} mz_zip_archive_file_stat; + +typedef size_t (*mz_file_read_func)(void *pOpaque, mz_uint64 file_ofs, void *pBuf, size_t n); +typedef size_t (*mz_file_write_func)(void *pOpaque, mz_uint64 file_ofs, const void *pBuf, size_t n); + +struct mz_zip_internal_state_tag; +typedef struct mz_zip_internal_state_tag mz_zip_internal_state; + +typedef enum +{ + MZ_ZIP_MODE_INVALID = 0, + MZ_ZIP_MODE_READING = 1, + MZ_ZIP_MODE_WRITING = 2, + MZ_ZIP_MODE_WRITING_HAS_BEEN_FINALIZED = 3 +} mz_zip_mode; + +typedef struct +{ + mz_uint64 m_archive_size; + mz_uint64 m_central_directory_file_ofs; + mz_uint m_total_files; + mz_zip_mode m_zip_mode; + + mz_uint m_file_offset_alignment; + + mz_alloc_func m_pAlloc; + mz_free_func m_pFree; + mz_realloc_func m_pRealloc; + void *m_pAlloc_opaque; + + mz_file_read_func m_pRead; + mz_file_write_func m_pWrite; + void *m_pIO_opaque; + + mz_zip_internal_state *m_pState; + +} mz_zip_archive; + +typedef enum +{ + MZ_ZIP_FLAG_CASE_SENSITIVE = 0x0100, + MZ_ZIP_FLAG_IGNORE_PATH = 0x0200, + MZ_ZIP_FLAG_COMPRESSED_DATA = 0x0400, + MZ_ZIP_FLAG_DO_NOT_SORT_CENTRAL_DIRECTORY = 0x0800 +} mz_zip_flags; + +// ZIP archive reading + +// Inits a ZIP archive reader. +// These functions read and validate the archive's central directory. +mz_bool mz_zip_reader_init(mz_zip_archive *pZip, mz_uint64 size, mz_uint32 flags); +mz_bool mz_zip_reader_init_mem(mz_zip_archive *pZip, const void *pMem, size_t size, mz_uint32 flags); + +#ifndef MINIZ_NO_STDIO +mz_bool mz_zip_reader_init_file(mz_zip_archive *pZip, const char *pFilename, mz_uint32 flags); +#endif + +// Returns the total number of files in the archive. +mz_uint mz_zip_reader_get_num_files(mz_zip_archive *pZip); + +// Returns detailed information about an archive file entry. +mz_bool mz_zip_reader_file_stat(mz_zip_archive *pZip, mz_uint file_index, mz_zip_archive_file_stat *pStat); + +// Determines if an archive file entry is a directory entry. +mz_bool mz_zip_reader_is_file_a_directory(mz_zip_archive *pZip, mz_uint file_index); +mz_bool mz_zip_reader_is_file_encrypted(mz_zip_archive *pZip, mz_uint file_index); + +// Retrieves the filename of an archive file entry. +// Returns the number of bytes written to pFilename, or if filename_buf_size is 0 this function returns the number of bytes needed to fully store the filename. +mz_uint mz_zip_reader_get_filename(mz_zip_archive *pZip, mz_uint file_index, char *pFilename, mz_uint filename_buf_size); + +// Attempts to locates a file in the archive's central directory. +// Valid flags: MZ_ZIP_FLAG_CASE_SENSITIVE, MZ_ZIP_FLAG_IGNORE_PATH +// Returns -1 if the file cannot be found. +int mz_zip_reader_locate_file(mz_zip_archive *pZip, const char *pName, const char *pComment, mz_uint flags); + +// Extracts a archive file to a memory buffer using no memory allocation. +mz_bool mz_zip_reader_extract_to_mem_no_alloc(mz_zip_archive *pZip, mz_uint file_index, void *pBuf, size_t buf_size, mz_uint flags, void *pUser_read_buf, size_t user_read_buf_size); +mz_bool mz_zip_reader_extract_file_to_mem_no_alloc(mz_zip_archive *pZip, const char *pFilename, void *pBuf, size_t buf_size, mz_uint flags, void *pUser_read_buf, size_t user_read_buf_size); + +// Extracts a archive file to a memory buffer. +mz_bool mz_zip_reader_extract_to_mem(mz_zip_archive *pZip, mz_uint file_index, void *pBuf, size_t buf_size, mz_uint flags); +mz_bool mz_zip_reader_extract_file_to_mem(mz_zip_archive *pZip, const char *pFilename, void *pBuf, size_t buf_size, mz_uint flags); + +// Extracts a archive file to a dynamically allocated heap buffer. +void *mz_zip_reader_extract_to_heap(mz_zip_archive *pZip, mz_uint file_index, size_t *pSize, mz_uint flags); +void *mz_zip_reader_extract_file_to_heap(mz_zip_archive *pZip, const char *pFilename, size_t *pSize, mz_uint flags); + +// Extracts a archive file using a callback function to output the file's data. +mz_bool mz_zip_reader_extract_to_callback(mz_zip_archive *pZip, mz_uint file_index, mz_file_write_func pCallback, void *pOpaque, mz_uint flags); +mz_bool mz_zip_reader_extract_file_to_callback(mz_zip_archive *pZip, const char *pFilename, mz_file_write_func pCallback, void *pOpaque, mz_uint flags); + +#ifndef MINIZ_NO_STDIO +// Extracts a archive file to a disk file and sets its last accessed and modified times. +// This function only extracts files, not archive directory records. +mz_bool mz_zip_reader_extract_to_file(mz_zip_archive *pZip, mz_uint file_index, const char *pDst_filename, mz_uint flags); +mz_bool mz_zip_reader_extract_file_to_file(mz_zip_archive *pZip, const char *pArchive_filename, const char *pDst_filename, mz_uint flags); +#endif + +// Ends archive reading, freeing all allocations, and closing the input archive file if mz_zip_reader_init_file() was used. +mz_bool mz_zip_reader_end(mz_zip_archive *pZip); + +// ZIP archive writing + +#ifndef MINIZ_NO_ARCHIVE_WRITING_APIS + +// Inits a ZIP archive writer. +mz_bool mz_zip_writer_init(mz_zip_archive *pZip, mz_uint64 existing_size); +mz_bool mz_zip_writer_init_heap(mz_zip_archive *pZip, size_t size_to_reserve_at_beginning, size_t initial_allocation_size); + +#ifndef MINIZ_NO_STDIO +mz_bool mz_zip_writer_init_file(mz_zip_archive *pZip, const char *pFilename, mz_uint64 size_to_reserve_at_beginning); +#endif + +// Converts a ZIP archive reader object into a writer object, to allow efficient in-place file appends to occur on an existing archive. +// For archives opened using mz_zip_reader_init_file, pFilename must be the archive's filename so it can be reopened for writing. If the file can't be reopened, mz_zip_reader_end() will be called. +// For archives opened using mz_zip_reader_init_mem, the memory block must be growable using the realloc callback (which defaults to realloc unless you've overridden it). +// Finally, for archives opened using mz_zip_reader_init, the mz_zip_archive's user provided m_pWrite function cannot be NULL. +// Note: In-place archive modification is not recommended unless you know what you're doing, because if execution stops or something goes wrong before +// the archive is finalized the file's central directory will be hosed. +mz_bool mz_zip_writer_init_from_reader(mz_zip_archive *pZip, const char *pFilename); + +// Adds the contents of a memory buffer to an archive. These functions record the current local time into the archive. +// To add a directory entry, call this method with an archive name ending in a forwardslash with empty buffer. +// level_and_flags - compression level (0-10, see MZ_BEST_SPEED, MZ_BEST_COMPRESSION, etc.) logically OR'd with zero or more mz_zip_flags, or just set to MZ_DEFAULT_COMPRESSION. +mz_bool mz_zip_writer_add_mem(mz_zip_archive *pZip, const char *pArchive_name, const void *pBuf, size_t buf_size, mz_uint level_and_flags); +mz_bool mz_zip_writer_add_mem_ex(mz_zip_archive *pZip, const char *pArchive_name, const void *pBuf, size_t buf_size, const void *pComment, mz_uint16 comment_size, mz_uint level_and_flags, mz_uint64 uncomp_size, mz_uint32 uncomp_crc32); + +#ifndef MINIZ_NO_STDIO +// Adds the contents of a disk file to an archive. This function also records the disk file's modified time into the archive. +// level_and_flags - compression level (0-10, see MZ_BEST_SPEED, MZ_BEST_COMPRESSION, etc.) logically OR'd with zero or more mz_zip_flags, or just set to MZ_DEFAULT_COMPRESSION. +mz_bool mz_zip_writer_add_file(mz_zip_archive *pZip, const char *pArchive_name, const char *pSrc_filename, const void *pComment, mz_uint16 comment_size, mz_uint level_and_flags); +#endif + +// Adds a file to an archive by fully cloning the data from another archive. +// This function fully clones the source file's compressed data (no recompression), along with its full filename, extra data, and comment fields. +mz_bool mz_zip_writer_add_from_zip_reader(mz_zip_archive *pZip, mz_zip_archive *pSource_zip, mz_uint file_index); + +// Finalizes the archive by writing the central directory records followed by the end of central directory record. +// After an archive is finalized, the only valid call on the mz_zip_archive struct is mz_zip_writer_end(). +// An archive must be manually finalized by calling this function for it to be valid. +mz_bool mz_zip_writer_finalize_archive(mz_zip_archive *pZip); +mz_bool mz_zip_writer_finalize_heap_archive(mz_zip_archive *pZip, void **pBuf, size_t *pSize); + +// Ends archive writing, freeing all allocations, and closing the output file if mz_zip_writer_init_file() was used. +// Note for the archive to be valid, it must have been finalized before ending. +mz_bool mz_zip_writer_end(mz_zip_archive *pZip); + +// Misc. high-level helper functions: + +// mz_zip_add_mem_to_archive_file_in_place() efficiently (but not atomically) appends a memory blob to a ZIP archive. +// level_and_flags - compression level (0-10, see MZ_BEST_SPEED, MZ_BEST_COMPRESSION, etc.) logically OR'd with zero or more mz_zip_flags, or just set to MZ_DEFAULT_COMPRESSION. +mz_bool mz_zip_add_mem_to_archive_file_in_place(const char *pZip_filename, const char *pArchive_name, const void *pBuf, size_t buf_size, const void *pComment, mz_uint16 comment_size, mz_uint level_and_flags); + +// Reads a single file from an archive into a heap block. +// Returns NULL on failure. +void *mz_zip_extract_archive_file_to_heap(const char *pZip_filename, const char *pArchive_name, size_t *pSize, mz_uint zip_flags); + +#endif // #ifndef MINIZ_NO_ARCHIVE_WRITING_APIS + +#endif // #ifndef MINIZ_NO_ARCHIVE_APIS + +// ------------------- Low-level Decompression API Definitions + +// Decompression flags used by tinfl_decompress(). +// TINFL_FLAG_PARSE_ZLIB_HEADER: If set, the input has a valid zlib header and ends with an adler32 checksum (it's a valid zlib stream). Otherwise, the input is a raw deflate stream. +// TINFL_FLAG_HAS_MORE_INPUT: If set, there are more input bytes available beyond the end of the supplied input buffer. If clear, the input buffer contains all remaining input. +// TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF: If set, the output buffer is large enough to hold the entire decompressed stream. If clear, the output buffer is at least the size of the dictionary (typically 32KB). +// TINFL_FLAG_COMPUTE_ADLER32: Force adler-32 checksum computation of the decompressed bytes. +enum +{ + TINFL_FLAG_PARSE_ZLIB_HEADER = 1, + TINFL_FLAG_HAS_MORE_INPUT = 2, + TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF = 4, + TINFL_FLAG_COMPUTE_ADLER32 = 8 +}; + +// High level decompression functions: +// tinfl_decompress_mem_to_heap() decompresses a block in memory to a heap block allocated via malloc(). +// On entry: +// pSrc_buf, src_buf_len: Pointer and size of the Deflate or zlib source data to decompress. +// On return: +// Function returns a pointer to the decompressed data, or NULL on failure. +// *pOut_len will be set to the decompressed data's size, which could be larger than src_buf_len on uncompressible data. +// The caller must free() the returned block when it's no longer needed. +void *tinfl_decompress_mem_to_heap(const void *pSrc_buf, size_t src_buf_len, size_t *pOut_len, int flags); + +// tinfl_decompress_mem_to_mem() decompresses a block in memory to another block in memory. +// Returns TINFL_DECOMPRESS_MEM_TO_MEM_FAILED on failure, or the number of bytes written on success. +#define TINFL_DECOMPRESS_MEM_TO_MEM_FAILED ((size_t)(-1)) +size_t tinfl_decompress_mem_to_mem(void *pOut_buf, size_t out_buf_len, const void *pSrc_buf, size_t src_buf_len, int flags); + +// tinfl_decompress_mem_to_callback() decompresses a block in memory to an internal 32KB buffer, and a user provided callback function will be called to flush the buffer. +// Returns 1 on success or 0 on failure. +typedef int (*tinfl_put_buf_func_ptr)(const void* pBuf, int len, void *pUser); +int tinfl_decompress_mem_to_callback(const void *pIn_buf, size_t *pIn_buf_size, tinfl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags); + +struct tinfl_decompressor_tag; typedef struct tinfl_decompressor_tag tinfl_decompressor; + +// Max size of LZ dictionary. +#define TINFL_LZ_DICT_SIZE 32768 + +// Return status. +typedef enum +{ + TINFL_STATUS_BAD_PARAM = -3, + TINFL_STATUS_ADLER32_MISMATCH = -2, + TINFL_STATUS_FAILED = -1, + TINFL_STATUS_DONE = 0, + TINFL_STATUS_NEEDS_MORE_INPUT = 1, + TINFL_STATUS_HAS_MORE_OUTPUT = 2 +} tinfl_status; + +// Initializes the decompressor to its initial state. +#define tinfl_init(r) do { (r)->m_state = 0; } MZ_MACRO_END +#define tinfl_get_adler32(r) (r)->m_check_adler32 + +// Main low-level decompressor coroutine function. This is the only function actually needed for decompression. All the other functions are just high-level helpers for improved usability. +// This is a universal API, i.e. it can be used as a building block to build any desired higher level decompression API. In the limit case, it can be called once per every byte input or output. +tinfl_status tinfl_decompress(tinfl_decompressor *r, const mz_uint8 *pIn_buf_next, size_t *pIn_buf_size, mz_uint8 *pOut_buf_start, mz_uint8 *pOut_buf_next, size_t *pOut_buf_size, const mz_uint32 decomp_flags); + +// Internal/private bits follow. +enum +{ + TINFL_MAX_HUFF_TABLES = 3, TINFL_MAX_HUFF_SYMBOLS_0 = 288, TINFL_MAX_HUFF_SYMBOLS_1 = 32, TINFL_MAX_HUFF_SYMBOLS_2 = 19, + TINFL_FAST_LOOKUP_BITS = 10, TINFL_FAST_LOOKUP_SIZE = 1 << TINFL_FAST_LOOKUP_BITS +}; + +typedef struct +{ + mz_uint8 m_code_size[TINFL_MAX_HUFF_SYMBOLS_0]; + mz_int16 m_look_up[TINFL_FAST_LOOKUP_SIZE], m_tree[TINFL_MAX_HUFF_SYMBOLS_0 * 2]; +} tinfl_huff_table; + +#if MINIZ_HAS_64BIT_REGISTERS + #define TINFL_USE_64BIT_BITBUF 1 +#endif + +#if TINFL_USE_64BIT_BITBUF + typedef mz_uint64 tinfl_bit_buf_t; + #define TINFL_BITBUF_SIZE (64) +#else + typedef mz_uint32 tinfl_bit_buf_t; + #define TINFL_BITBUF_SIZE (32) +#endif + +struct tinfl_decompressor_tag +{ + mz_uint32 m_state, m_num_bits, m_zhdr0, m_zhdr1, m_z_adler32, m_final, m_type, m_check_adler32, m_dist, m_counter, m_num_extra, m_table_sizes[TINFL_MAX_HUFF_TABLES]; + tinfl_bit_buf_t m_bit_buf; + size_t m_dist_from_out_buf_start; + tinfl_huff_table m_tables[TINFL_MAX_HUFF_TABLES]; + mz_uint8 m_raw_header[4], m_len_codes[TINFL_MAX_HUFF_SYMBOLS_0 + TINFL_MAX_HUFF_SYMBOLS_1 + 137]; +}; + +// ------------------- Low-level Compression API Definitions + +// Set TDEFL_LESS_MEMORY to 1 to use less memory (compression will be slightly slower, and raw/dynamic blocks will be output more frequently). +#define TDEFL_LESS_MEMORY 0 + +// tdefl_init() compression flags logically OR'd together (low 12 bits contain the max. number of probes per dictionary search): +// TDEFL_DEFAULT_MAX_PROBES: The compressor defaults to 128 dictionary probes per dictionary search. 0=Huffman only, 1=Huffman+LZ (fastest/crap compression), 4095=Huffman+LZ (slowest/best compression). +enum +{ + TDEFL_HUFFMAN_ONLY = 0, TDEFL_DEFAULT_MAX_PROBES = 128, TDEFL_MAX_PROBES_MASK = 0xFFF +}; + +// TDEFL_WRITE_ZLIB_HEADER: If set, the compressor outputs a zlib header before the deflate data, and the Adler-32 of the source data at the end. Otherwise, you'll get raw deflate data. +// TDEFL_COMPUTE_ADLER32: Always compute the adler-32 of the input data (even when not writing zlib headers). +// TDEFL_GREEDY_PARSING_FLAG: Set to use faster greedy parsing, instead of more efficient lazy parsing. +// TDEFL_NONDETERMINISTIC_PARSING_FLAG: Enable to decrease the compressor's initialization time to the minimum, but the output may vary from run to run given the same input (depending on the contents of memory). +// TDEFL_RLE_MATCHES: Only look for RLE matches (matches with a distance of 1) +// TDEFL_FILTER_MATCHES: Discards matches <= 5 chars if enabled. +// TDEFL_FORCE_ALL_STATIC_BLOCKS: Disable usage of optimized Huffman tables. +// TDEFL_FORCE_ALL_RAW_BLOCKS: Only use raw (uncompressed) deflate blocks. +enum +{ + TDEFL_WRITE_ZLIB_HEADER = 0x01000, + TDEFL_COMPUTE_ADLER32 = 0x02000, + TDEFL_GREEDY_PARSING_FLAG = 0x04000, + TDEFL_NONDETERMINISTIC_PARSING_FLAG = 0x08000, + TDEFL_RLE_MATCHES = 0x10000, + TDEFL_FILTER_MATCHES = 0x20000, + TDEFL_FORCE_ALL_STATIC_BLOCKS = 0x40000, + TDEFL_FORCE_ALL_RAW_BLOCKS = 0x80000 +}; + +// High level compression functions: +// tdefl_compress_mem_to_heap() compresses a block in memory to a heap block allocated via malloc(). +// On entry: +// pSrc_buf, src_buf_len: Pointer and size of source block to compress. +// flags: The max match finder probes (default is 128) logically OR'd against the above flags. Higher probes are slower but improve compression. +// On return: +// Function returns a pointer to the compressed data, or NULL on failure. +// *pOut_len will be set to the compressed data's size, which could be larger than src_buf_len on uncompressible data. +// The caller must free() the returned block when it's no longer needed. +void *tdefl_compress_mem_to_heap(const void *pSrc_buf, size_t src_buf_len, size_t *pOut_len, int flags); + +// tdefl_compress_mem_to_mem() compresses a block in memory to another block in memory. +// Returns 0 on failure. +size_t tdefl_compress_mem_to_mem(void *pOut_buf, size_t out_buf_len, const void *pSrc_buf, size_t src_buf_len, int flags); + +// Compresses an image to a compressed PNG file in memory. +// On entry: +// pImage, w, h, and num_chans describe the image to compress. num_chans may be 1, 2, 3, or 4. +// On return: +// Function returns a pointer to the compressed data, or NULL on failure. +// *pLen_out will be set to the size of the PNG image file. +// The caller must free() the returned heap block (which will typically be larger than *pLen_out) when it's no longer needed. +void *tdefl_write_image_to_png_file_in_memory(const void *pImage, int w, int h, int bpl, int num_chans, size_t *pLen_out); + +// Output stream interface. The compressor uses this interface to write compressed data. It'll typically be called TDEFL_OUT_BUF_SIZE at a time. +typedef mz_bool (*tdefl_put_buf_func_ptr)(const void* pBuf, int len, void *pUser); + +// tdefl_compress_mem_to_output() compresses a block to an output stream. The above helpers use this function internally. +mz_bool tdefl_compress_mem_to_output(const void *pBuf, size_t buf_len, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags); + +enum { TDEFL_MAX_HUFF_TABLES = 3, TDEFL_MAX_HUFF_SYMBOLS_0 = 288, TDEFL_MAX_HUFF_SYMBOLS_1 = 32, TDEFL_MAX_HUFF_SYMBOLS_2 = 19, TDEFL_LZ_DICT_SIZE = 32768, TDEFL_LZ_DICT_SIZE_MASK = TDEFL_LZ_DICT_SIZE - 1, TDEFL_MIN_MATCH_LEN = 3, TDEFL_MAX_MATCH_LEN = 258 }; + +// TDEFL_OUT_BUF_SIZE MUST be large enough to hold a single entire compressed output block (using static/fixed Huffman codes). +#if TDEFL_LESS_MEMORY +enum { TDEFL_LZ_CODE_BUF_SIZE = 24 * 1024, TDEFL_OUT_BUF_SIZE = (TDEFL_LZ_CODE_BUF_SIZE * 13 ) / 10, TDEFL_MAX_HUFF_SYMBOLS = 288, TDEFL_LZ_HASH_BITS = 12, TDEFL_LEVEL1_HASH_SIZE_MASK = 4095, TDEFL_LZ_HASH_SHIFT = (TDEFL_LZ_HASH_BITS + 2) / 3, TDEFL_LZ_HASH_SIZE = 1 << TDEFL_LZ_HASH_BITS }; +#else +enum { TDEFL_LZ_CODE_BUF_SIZE = 64 * 1024, TDEFL_OUT_BUF_SIZE = (TDEFL_LZ_CODE_BUF_SIZE * 13 ) / 10, TDEFL_MAX_HUFF_SYMBOLS = 288, TDEFL_LZ_HASH_BITS = 15, TDEFL_LEVEL1_HASH_SIZE_MASK = 4095, TDEFL_LZ_HASH_SHIFT = (TDEFL_LZ_HASH_BITS + 2) / 3, TDEFL_LZ_HASH_SIZE = 1 << TDEFL_LZ_HASH_BITS }; +#endif + +// The low-level tdefl functions below may be used directly if the above helper functions aren't flexible enough. The low-level functions don't make any heap allocations, unlike the above helper functions. +typedef enum +{ + TDEFL_STATUS_BAD_PARAM = -2, + TDEFL_STATUS_PUT_BUF_FAILED = -1, + TDEFL_STATUS_OKAY = 0, + TDEFL_STATUS_DONE = 1, +} tdefl_status; + +// Must map to MZ_NO_FLUSH, MZ_SYNC_FLUSH, etc. enums +typedef enum +{ + TDEFL_NO_FLUSH = 0, + TDEFL_SYNC_FLUSH = 2, + TDEFL_FULL_FLUSH = 3, + TDEFL_FINISH = 4 +} tdefl_flush; + +// tdefl's compression state structure. +typedef struct +{ + tdefl_put_buf_func_ptr m_pPut_buf_func; + void *m_pPut_buf_user; + mz_uint m_flags, m_max_probes[2]; + int m_greedy_parsing; + mz_uint m_adler32, m_lookahead_pos, m_lookahead_size, m_dict_size; + mz_uint8 *m_pLZ_code_buf, *m_pLZ_flags, *m_pOutput_buf, *m_pOutput_buf_end; + mz_uint m_num_flags_left, m_total_lz_bytes, m_lz_code_buf_dict_pos, m_bits_in, m_bit_buffer; + mz_uint m_saved_match_dist, m_saved_match_len, m_saved_lit, m_output_flush_ofs, m_output_flush_remaining, m_finished, m_block_index, m_wants_to_finish; + tdefl_status m_prev_return_status; + const void *m_pIn_buf; + void *m_pOut_buf; + size_t *m_pIn_buf_size, *m_pOut_buf_size; + tdefl_flush m_flush; + const mz_uint8 *m_pSrc; + size_t m_src_buf_left, m_out_buf_ofs; + mz_uint8 m_dict[TDEFL_LZ_DICT_SIZE + TDEFL_MAX_MATCH_LEN - 1]; + mz_uint16 m_huff_count[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS]; + mz_uint16 m_huff_codes[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS]; + mz_uint8 m_huff_code_sizes[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS]; + mz_uint8 m_lz_code_buf[TDEFL_LZ_CODE_BUF_SIZE]; + mz_uint16 m_next[TDEFL_LZ_DICT_SIZE]; + mz_uint16 m_hash[TDEFL_LZ_HASH_SIZE]; + mz_uint8 m_output_buf[TDEFL_OUT_BUF_SIZE]; +} tdefl_compressor; + +// Initializes the compressor. +// There is no corresponding deinit() function because the tdefl API's do not dynamically allocate memory. +// pBut_buf_func: If NULL, output data will be supplied to the specified callback. In this case, the user should call the tdefl_compress_buffer() API for compression. +// If pBut_buf_func is NULL the user should always call the tdefl_compress() API. +// flags: See the above enums (TDEFL_HUFFMAN_ONLY, TDEFL_WRITE_ZLIB_HEADER, etc.) +tdefl_status tdefl_init(tdefl_compressor *d, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags); + +// Compresses a block of data, consuming as much of the specified input buffer as possible, and writing as much compressed data to the specified output buffer as possible. +tdefl_status tdefl_compress(tdefl_compressor *d, const void *pIn_buf, size_t *pIn_buf_size, void *pOut_buf, size_t *pOut_buf_size, tdefl_flush flush); + +// tdefl_compress_buffer() is only usable when the tdefl_init() is called with a non-NULL tdefl_put_buf_func_ptr. +// tdefl_compress_buffer() always consumes the entire input buffer. +tdefl_status tdefl_compress_buffer(tdefl_compressor *d, const void *pIn_buf, size_t in_buf_size, tdefl_flush flush); + +tdefl_status tdefl_get_prev_return_status(tdefl_compressor *d); +mz_uint32 tdefl_get_adler32(tdefl_compressor *d); + +// Can't use tdefl_create_comp_flags_from_zip_params if MINIZ_NO_ZLIB_APIS isn't defined, because it uses some of its macros. +#ifndef MINIZ_NO_ZLIB_APIS +// Create tdefl_compress() flags given zlib-style compression parameters. +// level may range from [0,10] (where 10 is absolute max compression, but may be much slower on some files) +// window_bits may be -15 (raw deflate) or 15 (zlib) +// strategy may be either MZ_DEFAULT_STRATEGY, MZ_FILTERED, MZ_HUFFMAN_ONLY, MZ_RLE, or MZ_FIXED +mz_uint tdefl_create_comp_flags_from_zip_params(int level, int window_bits, int strategy); +#endif // #ifndef MINIZ_NO_ZLIB_APIS + +#ifdef __cplusplus +} +#endif + +#endif // MINIZ_HEADER_INCLUDED + +// ------------------- End of Header: Implementation follows. (If you only want the header, define MINIZ_HEADER_FILE_ONLY.) + +#ifndef MINIZ_HEADER_FILE_ONLY + +typedef unsigned char mz_validate_uint16[sizeof(mz_uint16)==2 ? 1 : -1]; +typedef unsigned char mz_validate_uint32[sizeof(mz_uint32)==4 ? 1 : -1]; +typedef unsigned char mz_validate_uint64[sizeof(mz_uint64)==8 ? 1 : -1]; + +#include +#include + +#define MZ_ASSERT(x) assert(x) + +#ifdef MINIZ_NO_MALLOC + #define MZ_MALLOC(x) NULL + #define MZ_FREE(x) (void)x, ((void)0) + #define MZ_REALLOC(p, x) NULL +#elif defined(MINIZ_SDL_MALLOC) + #define MZ_MALLOC(x) SDL_malloc(x) + #define MZ_FREE(x) SDL_free(x) + #define MZ_REALLOC(p, x) SDL_realloc(p, x) +#else + #define MZ_MALLOC(x) malloc(x) + #define MZ_FREE(x) free(x) + #define MZ_REALLOC(p, x) realloc(p, x) +#endif + +#define MZ_MAX(a,b) (((a)>(b))?(a):(b)) +#define MZ_MIN(a,b) (((a)<(b))?(a):(b)) +#define MZ_CLEAR_OBJ(obj) memset(&(obj), 0, sizeof(obj)) + +#if MINIZ_USE_UNALIGNED_LOADS_AND_STORES && MINIZ_LITTLE_ENDIAN + #define MZ_READ_LE16(p) *((const mz_uint16 *)(p)) + #define MZ_READ_LE32(p) *((const mz_uint32 *)(p)) +#else + #define MZ_READ_LE16(p) ((mz_uint32)(((const mz_uint8 *)(p))[0]) | ((mz_uint32)(((const mz_uint8 *)(p))[1]) << 8U)) + #define MZ_READ_LE32(p) ((mz_uint32)(((const mz_uint8 *)(p))[0]) | ((mz_uint32)(((const mz_uint8 *)(p))[1]) << 8U) | ((mz_uint32)(((const mz_uint8 *)(p))[2]) << 16U) | ((mz_uint32)(((const mz_uint8 *)(p))[3]) << 24U)) +#endif + +#ifdef _MSC_VER + #define MZ_FORCEINLINE __forceinline +#elif defined(__GNUC__) + #define MZ_FORCEINLINE __attribute__((__always_inline__)) +#else + #define MZ_FORCEINLINE inline +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +// ------------------- zlib-style API's + +mz_ulong mz_adler32(mz_ulong adler, const unsigned char *ptr, size_t buf_len) +{ + mz_uint32 i, s1 = (mz_uint32)(adler & 0xffff), s2 = (mz_uint32)(adler >> 16); size_t block_len = buf_len % 5552; + if (!ptr) return MZ_ADLER32_INIT; + while (buf_len) { + for (i = 0; i + 7 < block_len; i += 8, ptr += 8) { + s1 += ptr[0], s2 += s1; s1 += ptr[1], s2 += s1; s1 += ptr[2], s2 += s1; s1 += ptr[3], s2 += s1; + s1 += ptr[4], s2 += s1; s1 += ptr[5], s2 += s1; s1 += ptr[6], s2 += s1; s1 += ptr[7], s2 += s1; + } + for ( ; i < block_len; ++i) s1 += *ptr++, s2 += s1; + s1 %= 65521U, s2 %= 65521U; buf_len -= block_len; block_len = 5552; + } + return (s2 << 16) + s1; +} + +// Karl Malbrain's compact CRC-32. See "A compact CCITT crc16 and crc32 C implementation that balances processor cache usage against speed": http://www.geocities.com/malbrain/ +mz_ulong mz_crc32(mz_ulong crc, const mz_uint8 *ptr, size_t buf_len) +{ + static const mz_uint32 s_crc32[16] = { 0, 0x1db71064, 0x3b6e20c8, 0x26d930ac, 0x76dc4190, 0x6b6b51f4, 0x4db26158, 0x5005713c, + 0xedb88320, 0xf00f9344, 0xd6d6a3e8, 0xcb61b38c, 0x9b64c2b0, 0x86d3d2d4, 0xa00ae278, 0xbdbdf21c }; + mz_uint32 crcu32 = (mz_uint32)crc; + if (!ptr) return MZ_CRC32_INIT; + crcu32 = ~crcu32; while (buf_len--) { mz_uint8 b = *ptr++; crcu32 = (crcu32 >> 4) ^ s_crc32[(crcu32 & 0xF) ^ (b & 0xF)]; crcu32 = (crcu32 >> 4) ^ s_crc32[(crcu32 & 0xF) ^ (b >> 4)]; } + return ~crcu32; +} + +#ifndef MINIZ_NO_ZLIB_APIS + +static void *def_alloc_func(void *opaque, size_t items, size_t size) { (void)opaque, (void)items, (void)size; return MZ_MALLOC(items * size); } +static void def_free_func(void *opaque, void *address) { (void)opaque, (void)address; MZ_FREE(address); } +static void *def_realloc_func(void *opaque, void *address, size_t items, size_t size) { (void)opaque, (void)address, (void)items, (void)size; return MZ_REALLOC(address, items * size); } + +const char *mz_version(void) +{ + return MZ_VERSION; +} + +int mz_deflateInit(mz_streamp pStream, int level) +{ + return mz_deflateInit2(pStream, level, MZ_DEFLATED, MZ_DEFAULT_WINDOW_BITS, 9, MZ_DEFAULT_STRATEGY); +} + +int mz_deflateInit2(mz_streamp pStream, int level, int method, int window_bits, int mem_level, int strategy) +{ + tdefl_compressor *pComp; + mz_uint comp_flags = TDEFL_COMPUTE_ADLER32 | tdefl_create_comp_flags_from_zip_params(level, window_bits, strategy); + + if (!pStream) return MZ_STREAM_ERROR; + if ((method != MZ_DEFLATED) || ((mem_level < 1) || (mem_level > 9)) || ((window_bits != MZ_DEFAULT_WINDOW_BITS) && (-window_bits != MZ_DEFAULT_WINDOW_BITS))) return MZ_PARAM_ERROR; + + pStream->data_type = 0; + pStream->adler = MZ_ADLER32_INIT; + pStream->msg = NULL; + pStream->reserved = 0; + pStream->total_in = 0; + pStream->total_out = 0; + if (!pStream->zalloc) pStream->zalloc = def_alloc_func; + if (!pStream->zfree) pStream->zfree = def_free_func; + + pComp = (tdefl_compressor *)pStream->zalloc(pStream->opaque, 1, sizeof(tdefl_compressor)); + if (!pComp) + return MZ_MEM_ERROR; + + pStream->state = (struct mz_internal_state *)pComp; + + if (tdefl_init(pComp, NULL, NULL, comp_flags) != TDEFL_STATUS_OKAY) + { + mz_deflateEnd(pStream); + return MZ_PARAM_ERROR; + } + + return MZ_OK; +} + +int mz_deflateReset(mz_streamp pStream) +{ + if ((!pStream) || (!pStream->state) || (!pStream->zalloc) || (!pStream->zfree)) return MZ_STREAM_ERROR; + pStream->total_in = pStream->total_out = 0; + tdefl_init((tdefl_compressor*)pStream->state, NULL, NULL, ((tdefl_compressor*)pStream->state)->m_flags); + return MZ_OK; +} + +int mz_deflate(mz_streamp pStream, int flush) +{ + size_t in_bytes, out_bytes; + mz_ulong orig_total_in, orig_total_out; + int mz_status = MZ_OK; + + if ((!pStream) || (!pStream->state) || (flush < 0) || (flush > MZ_FINISH) || (!pStream->next_out)) return MZ_STREAM_ERROR; + if (!pStream->avail_out) return MZ_BUF_ERROR; + + if (flush == MZ_PARTIAL_FLUSH) flush = MZ_SYNC_FLUSH; + + if (((tdefl_compressor*)pStream->state)->m_prev_return_status == TDEFL_STATUS_DONE) + return (flush == MZ_FINISH) ? MZ_STREAM_END : MZ_BUF_ERROR; + + orig_total_in = pStream->total_in; orig_total_out = pStream->total_out; + for ( ; ; ) + { + tdefl_status defl_status; + in_bytes = pStream->avail_in; out_bytes = pStream->avail_out; + + defl_status = tdefl_compress((tdefl_compressor*)pStream->state, pStream->next_in, &in_bytes, pStream->next_out, &out_bytes, (tdefl_flush)flush); + pStream->next_in += (mz_uint)in_bytes; pStream->avail_in -= (mz_uint)in_bytes; + pStream->total_in += (mz_uint)in_bytes; pStream->adler = tdefl_get_adler32((tdefl_compressor*)pStream->state); + + pStream->next_out += (mz_uint)out_bytes; pStream->avail_out -= (mz_uint)out_bytes; + pStream->total_out += (mz_uint)out_bytes; + + if (defl_status < 0) + { + mz_status = MZ_STREAM_ERROR; + break; + } + else if (defl_status == TDEFL_STATUS_DONE) + { + mz_status = MZ_STREAM_END; + break; + } + else if (!pStream->avail_out) + break; + else if ((!pStream->avail_in) && (flush != MZ_FINISH)) + { + if ((flush) || (pStream->total_in != orig_total_in) || (pStream->total_out != orig_total_out)) + break; + return MZ_BUF_ERROR; // Can't make forward progress without some input. + } + } + return mz_status; +} + +int mz_deflateEnd(mz_streamp pStream) +{ + if (!pStream) return MZ_STREAM_ERROR; + if (pStream->state) + { + pStream->zfree(pStream->opaque, pStream->state); + pStream->state = NULL; + } + return MZ_OK; +} + +mz_ulong mz_deflateBound(mz_streamp pStream, mz_ulong source_len) +{ + (void)pStream; + // This is really over conservative. (And lame, but it's actually pretty tricky to compute a true upper bound given the way tdefl's blocking works.) + return MZ_MAX(128 + (source_len * 110) / 100, 128 + source_len + ((source_len / (31 * 1024)) + 1) * 5); +} + +int mz_compress2(unsigned char *pDest, mz_ulong *pDest_len, const unsigned char *pSource, mz_ulong source_len, int level) +{ + int status; + mz_stream stream; + memset(&stream, 0, sizeof(stream)); + + // In case mz_ulong is 64-bits (argh I hate longs). + if ((source_len | *pDest_len) > 0xFFFFFFFFU) return MZ_PARAM_ERROR; + + stream.next_in = pSource; + stream.avail_in = (mz_uint32)source_len; + stream.next_out = pDest; + stream.avail_out = (mz_uint32)*pDest_len; + + status = mz_deflateInit(&stream, level); + if (status != MZ_OK) return status; + + status = mz_deflate(&stream, MZ_FINISH); + if (status != MZ_STREAM_END) + { + mz_deflateEnd(&stream); + return (status == MZ_OK) ? MZ_BUF_ERROR : status; + } + + *pDest_len = stream.total_out; + return mz_deflateEnd(&stream); +} + +int mz_compress(unsigned char *pDest, mz_ulong *pDest_len, const unsigned char *pSource, mz_ulong source_len) +{ + return mz_compress2(pDest, pDest_len, pSource, source_len, MZ_DEFAULT_COMPRESSION); +} + +mz_ulong mz_compressBound(mz_ulong source_len) +{ + return mz_deflateBound(NULL, source_len); +} + +typedef struct +{ + tinfl_decompressor m_decomp; + mz_uint m_dict_ofs, m_dict_avail, m_first_call, m_has_flushed; int m_window_bits; + mz_uint8 m_dict[TINFL_LZ_DICT_SIZE]; + tinfl_status m_last_status; +} inflate_state; + +int mz_inflateInit2(mz_streamp pStream, int window_bits) +{ + inflate_state *pDecomp; + if (!pStream) return MZ_STREAM_ERROR; + if ((window_bits != MZ_DEFAULT_WINDOW_BITS) && (-window_bits != MZ_DEFAULT_WINDOW_BITS)) return MZ_PARAM_ERROR; + + pStream->data_type = 0; + pStream->adler = 0; + pStream->msg = NULL; + pStream->total_in = 0; + pStream->total_out = 0; + pStream->reserved = 0; + if (!pStream->zalloc) pStream->zalloc = def_alloc_func; + if (!pStream->zfree) pStream->zfree = def_free_func; + + pDecomp = (inflate_state*)pStream->zalloc(pStream->opaque, 1, sizeof(inflate_state)); + if (!pDecomp) return MZ_MEM_ERROR; + + pStream->state = (struct mz_internal_state *)pDecomp; + + tinfl_init(&pDecomp->m_decomp); + pDecomp->m_dict_ofs = 0; + pDecomp->m_dict_avail = 0; + pDecomp->m_last_status = TINFL_STATUS_NEEDS_MORE_INPUT; + pDecomp->m_first_call = 1; + pDecomp->m_has_flushed = 0; + pDecomp->m_window_bits = window_bits; + + return MZ_OK; +} + +int mz_inflateInit(mz_streamp pStream) +{ + return mz_inflateInit2(pStream, MZ_DEFAULT_WINDOW_BITS); +} + +int mz_inflate(mz_streamp pStream, int flush) +{ + inflate_state* pState; + mz_uint n, first_call, decomp_flags = TINFL_FLAG_COMPUTE_ADLER32; + size_t in_bytes, out_bytes, orig_avail_in; + tinfl_status status; + + if ((!pStream) || (!pStream->state)) return MZ_STREAM_ERROR; + if (flush == MZ_PARTIAL_FLUSH) flush = MZ_SYNC_FLUSH; + if ((flush) && (flush != MZ_SYNC_FLUSH) && (flush != MZ_FINISH)) return MZ_STREAM_ERROR; + + pState = (inflate_state*)pStream->state; + if (pState->m_window_bits > 0) decomp_flags |= TINFL_FLAG_PARSE_ZLIB_HEADER; + orig_avail_in = pStream->avail_in; + + first_call = pState->m_first_call; pState->m_first_call = 0; + if (pState->m_last_status < 0) return MZ_DATA_ERROR; + + if (pState->m_has_flushed && (flush != MZ_FINISH)) return MZ_STREAM_ERROR; + pState->m_has_flushed |= (flush == MZ_FINISH); + + if ((flush == MZ_FINISH) && (first_call)) + { + // MZ_FINISH on the first call implies that the input and output buffers are large enough to hold the entire compressed/decompressed file. + decomp_flags |= TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF; + in_bytes = pStream->avail_in; out_bytes = pStream->avail_out; + status = tinfl_decompress(&pState->m_decomp, pStream->next_in, &in_bytes, pStream->next_out, pStream->next_out, &out_bytes, decomp_flags); + pState->m_last_status = status; + pStream->next_in += (mz_uint)in_bytes; pStream->avail_in -= (mz_uint)in_bytes; pStream->total_in += (mz_uint)in_bytes; + pStream->adler = tinfl_get_adler32(&pState->m_decomp); + pStream->next_out += (mz_uint)out_bytes; pStream->avail_out -= (mz_uint)out_bytes; pStream->total_out += (mz_uint)out_bytes; + + if (status < 0) + return MZ_DATA_ERROR; + else if (status != TINFL_STATUS_DONE) + { + pState->m_last_status = TINFL_STATUS_FAILED; + return MZ_BUF_ERROR; + } + return MZ_STREAM_END; + } + // flush != MZ_FINISH then we must assume there's more input. + if (flush != MZ_FINISH) decomp_flags |= TINFL_FLAG_HAS_MORE_INPUT; + + if (pState->m_dict_avail) + { + n = MZ_MIN(pState->m_dict_avail, pStream->avail_out); + memcpy(pStream->next_out, pState->m_dict + pState->m_dict_ofs, n); + pStream->next_out += n; pStream->avail_out -= n; pStream->total_out += n; + pState->m_dict_avail -= n; pState->m_dict_ofs = (pState->m_dict_ofs + n) & (TINFL_LZ_DICT_SIZE - 1); + return ((pState->m_last_status == TINFL_STATUS_DONE) && (!pState->m_dict_avail)) ? MZ_STREAM_END : MZ_OK; + } + + for ( ; ; ) + { + in_bytes = pStream->avail_in; + out_bytes = TINFL_LZ_DICT_SIZE - pState->m_dict_ofs; + + status = tinfl_decompress(&pState->m_decomp, pStream->next_in, &in_bytes, pState->m_dict, pState->m_dict + pState->m_dict_ofs, &out_bytes, decomp_flags); + pState->m_last_status = status; + + pStream->next_in += (mz_uint)in_bytes; pStream->avail_in -= (mz_uint)in_bytes; + pStream->total_in += (mz_uint)in_bytes; pStream->adler = tinfl_get_adler32(&pState->m_decomp); + + pState->m_dict_avail = (mz_uint)out_bytes; + + n = MZ_MIN(pState->m_dict_avail, pStream->avail_out); + memcpy(pStream->next_out, pState->m_dict + pState->m_dict_ofs, n); + pStream->next_out += n; pStream->avail_out -= n; pStream->total_out += n; + pState->m_dict_avail -= n; pState->m_dict_ofs = (pState->m_dict_ofs + n) & (TINFL_LZ_DICT_SIZE - 1); + + if (status < 0) + return MZ_DATA_ERROR; // Stream is corrupted (there could be some uncompressed data left in the output dictionary - oh well). + else if ((status == TINFL_STATUS_NEEDS_MORE_INPUT) && (!orig_avail_in)) + return MZ_BUF_ERROR; // Signal caller that we can't make forward progress without supplying more input or by setting flush to MZ_FINISH. + else if (flush == MZ_FINISH) + { + // The output buffer MUST be large to hold the remaining uncompressed data when flush==MZ_FINISH. + if (status == TINFL_STATUS_DONE) + return pState->m_dict_avail ? MZ_BUF_ERROR : MZ_STREAM_END; + // status here must be TINFL_STATUS_HAS_MORE_OUTPUT, which means there's at least 1 more byte on the way. If there's no more room left in the output buffer then something is wrong. + else if (!pStream->avail_out) + return MZ_BUF_ERROR; + } + else if ((status == TINFL_STATUS_DONE) || (!pStream->avail_in) || (!pStream->avail_out) || (pState->m_dict_avail)) + break; + } + + return ((status == TINFL_STATUS_DONE) && (!pState->m_dict_avail)) ? MZ_STREAM_END : MZ_OK; +} + +int mz_inflateEnd(mz_streamp pStream) +{ + if (!pStream) + return MZ_STREAM_ERROR; + if (pStream->state) + { + pStream->zfree(pStream->opaque, pStream->state); + pStream->state = NULL; + } + return MZ_OK; +} + +int mz_uncompress(unsigned char *pDest, mz_ulong *pDest_len, const unsigned char *pSource, mz_ulong source_len) +{ + mz_stream stream; + int status; + memset(&stream, 0, sizeof(stream)); + + // In case mz_ulong is 64-bits (argh I hate longs). + if ((source_len | *pDest_len) > 0xFFFFFFFFU) return MZ_PARAM_ERROR; + + stream.next_in = pSource; + stream.avail_in = (mz_uint32)source_len; + stream.next_out = pDest; + stream.avail_out = (mz_uint32)*pDest_len; + + status = mz_inflateInit(&stream); + if (status != MZ_OK) + return status; + + status = mz_inflate(&stream, MZ_FINISH); + if (status != MZ_STREAM_END) + { + mz_inflateEnd(&stream); + return ((status == MZ_BUF_ERROR) && (!stream.avail_in)) ? MZ_DATA_ERROR : status; + } + *pDest_len = stream.total_out; + + return mz_inflateEnd(&stream); +} + +const char *mz_error(int err) +{ + static struct { int m_err; const char *m_pDesc; } s_error_descs[] = + { + { MZ_OK, "" }, { MZ_STREAM_END, "stream end" }, { MZ_NEED_DICT, "need dictionary" }, { MZ_ERRNO, "file error" }, { MZ_STREAM_ERROR, "stream error" }, + { MZ_DATA_ERROR, "data error" }, { MZ_MEM_ERROR, "out of memory" }, { MZ_BUF_ERROR, "buf error" }, { MZ_VERSION_ERROR, "version error" }, { MZ_PARAM_ERROR, "parameter error" } + }; + mz_uint i; for (i = 0; i < sizeof(s_error_descs) / sizeof(s_error_descs[0]); ++i) if (s_error_descs[i].m_err == err) return s_error_descs[i].m_pDesc; + return NULL; +} + +#endif //MINIZ_NO_ZLIB_APIS + +// ------------------- Low-level Decompression (completely independent from all compression API's) + +#define TINFL_MEMCPY(d, s, l) memcpy(d, s, l) +#define TINFL_MEMSET(p, c, l) memset(p, c, l) + +#define TINFL_CR_BEGIN switch(r->m_state) { case 0: +#define TINFL_CR_RETURN(state_index, result) do { status = result; r->m_state = state_index; goto common_exit; case state_index:; } MZ_MACRO_END +#define TINFL_CR_RETURN_FOREVER(state_index, result) do { for ( ; ; ) { TINFL_CR_RETURN(state_index, result); } } MZ_MACRO_END +#define TINFL_CR_FINISH } + +// TODO: If the caller has indicated that there's no more input, and we attempt to read beyond the input buf, then something is wrong with the input because the inflator never +// reads ahead more than it needs to. Currently TINFL_GET_BYTE() pads the end of the stream with 0's in this scenario. +#define TINFL_GET_BYTE(state_index, c) do { \ + if (pIn_buf_cur >= pIn_buf_end) { \ + for ( ; ; ) { \ + if (decomp_flags & TINFL_FLAG_HAS_MORE_INPUT) { \ + TINFL_CR_RETURN(state_index, TINFL_STATUS_NEEDS_MORE_INPUT); \ + if (pIn_buf_cur < pIn_buf_end) { \ + c = *pIn_buf_cur++; \ + break; \ + } \ + } else { \ + c = 0; \ + break; \ + } \ + } \ + } else c = *pIn_buf_cur++; } MZ_MACRO_END + +#define TINFL_NEED_BITS(state_index, n) do { mz_uint c; TINFL_GET_BYTE(state_index, c); bit_buf |= (((tinfl_bit_buf_t)c) << num_bits); num_bits += 8; } while (num_bits < (mz_uint)(n)) +#define TINFL_SKIP_BITS(state_index, n) do { if (num_bits < (mz_uint)(n)) { TINFL_NEED_BITS(state_index, n); } bit_buf >>= (n); num_bits -= (n); } MZ_MACRO_END +#define TINFL_GET_BITS(state_index, b, n) do { if (num_bits < (mz_uint)(n)) { TINFL_NEED_BITS(state_index, n); } b = bit_buf & ((1 << (n)) - 1); bit_buf >>= (n); num_bits -= (n); } MZ_MACRO_END + +// TINFL_HUFF_BITBUF_FILL() is only used rarely, when the number of bytes remaining in the input buffer falls below 2. +// It reads just enough bytes from the input stream that are needed to decode the next Huffman code (and absolutely no more). It works by trying to fully decode a +// Huffman code by using whatever bits are currently present in the bit buffer. If this fails, it reads another byte, and tries again until it succeeds or until the +// bit buffer contains >=15 bits (deflate's max. Huffman code size). +#define TINFL_HUFF_BITBUF_FILL(state_index, pHuff) \ + do { \ + temp = (pHuff)->m_look_up[bit_buf & (TINFL_FAST_LOOKUP_SIZE - 1)]; \ + if (temp >= 0) { \ + code_len = temp >> 9; \ + if ((code_len) && (num_bits >= code_len)) \ + break; \ + } else if (num_bits > TINFL_FAST_LOOKUP_BITS) { \ + code_len = TINFL_FAST_LOOKUP_BITS; \ + do { \ + temp = (pHuff)->m_tree[~temp + ((bit_buf >> code_len++) & 1)]; \ + } while ((temp < 0) && (num_bits >= (code_len + 1))); if (temp >= 0) break; \ + } TINFL_GET_BYTE(state_index, c); bit_buf |= (((tinfl_bit_buf_t)c) << num_bits); num_bits += 8; \ + } while (num_bits < 15); + +// TINFL_HUFF_DECODE() decodes the next Huffman coded symbol. It's more complex than you would initially expect because the zlib API expects the decompressor to never read +// beyond the final byte of the deflate stream. (In other words, when this macro wants to read another byte from the input, it REALLY needs another byte in order to fully +// decode the next Huffman code.) Handling this properly is particularly important on raw deflate (non-zlib) streams, which aren't followed by a byte aligned adler-32. +// The slow path is only executed at the very end of the input buffer. +#define TINFL_HUFF_DECODE(state_index, sym, pHuff) do { \ + int temp; mz_uint code_len, c; \ + if (num_bits < 15) { \ + if ((pIn_buf_end - pIn_buf_cur) < 2) { \ + TINFL_HUFF_BITBUF_FILL(state_index, pHuff); \ + } else { \ + bit_buf |= (((tinfl_bit_buf_t)pIn_buf_cur[0]) << num_bits) | (((tinfl_bit_buf_t)pIn_buf_cur[1]) << (num_bits + 8)); pIn_buf_cur += 2; num_bits += 16; \ + } \ + } \ + if ((temp = (pHuff)->m_look_up[bit_buf & (TINFL_FAST_LOOKUP_SIZE - 1)]) >= 0) \ + code_len = temp >> 9, temp &= 511; \ + else { \ + code_len = TINFL_FAST_LOOKUP_BITS; do { temp = (pHuff)->m_tree[~temp + ((bit_buf >> code_len++) & 1)]; } while (temp < 0); \ + } sym = temp; bit_buf >>= code_len; num_bits -= code_len; } MZ_MACRO_END + +tinfl_status tinfl_decompress(tinfl_decompressor *r, const mz_uint8 *pIn_buf_next, size_t *pIn_buf_size, mz_uint8 *pOut_buf_start, mz_uint8 *pOut_buf_next, size_t *pOut_buf_size, const mz_uint32 decomp_flags) +{ + static const int s_length_base[31] = { 3,4,5,6,7,8,9,10,11,13, 15,17,19,23,27,31,35,43,51,59, 67,83,99,115,131,163,195,227,258,0,0 }; + static const int s_length_extra[31]= { 0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0,0,0 }; + static const int s_dist_base[32] = { 1,2,3,4,5,7,9,13,17,25,33,49,65,97,129,193, 257,385,513,769,1025,1537,2049,3073,4097,6145,8193,12289,16385,24577,0,0}; + static const int s_dist_extra[32] = { 0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; + static const mz_uint8 s_length_dezigzag[19] = { 16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15 }; + static const int s_min_table_sizes[3] = { 257, 1, 4 }; + + tinfl_status status = TINFL_STATUS_FAILED; mz_uint32 num_bits, dist, counter, num_extra; tinfl_bit_buf_t bit_buf; + const mz_uint8 *pIn_buf_cur = pIn_buf_next, *const pIn_buf_end = pIn_buf_next + *pIn_buf_size; + mz_uint8 *pOut_buf_cur = pOut_buf_next, *const pOut_buf_end = pOut_buf_next + *pOut_buf_size; + size_t out_buf_size_mask = (decomp_flags & TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF) ? (size_t)-1 : ((pOut_buf_next - pOut_buf_start) + *pOut_buf_size) - 1, dist_from_out_buf_start; + + // Ensure the output buffer's size is a power of 2, unless the output buffer is large enough to hold the entire output file (in which case it doesn't matter). + if (((out_buf_size_mask + 1) & out_buf_size_mask) || (pOut_buf_next < pOut_buf_start)) { *pIn_buf_size = *pOut_buf_size = 0; return TINFL_STATUS_BAD_PARAM; } + + num_bits = r->m_num_bits; bit_buf = r->m_bit_buf; dist = r->m_dist; counter = r->m_counter; num_extra = r->m_num_extra; dist_from_out_buf_start = r->m_dist_from_out_buf_start; + TINFL_CR_BEGIN + + bit_buf = num_bits = dist = counter = num_extra = r->m_zhdr0 = r->m_zhdr1 = 0; r->m_z_adler32 = r->m_check_adler32 = 1; + if (decomp_flags & TINFL_FLAG_PARSE_ZLIB_HEADER) + { + TINFL_GET_BYTE(1, r->m_zhdr0); TINFL_GET_BYTE(2, r->m_zhdr1); + counter = (((r->m_zhdr0 * 256 + r->m_zhdr1) % 31 != 0) || (r->m_zhdr1 & 32) || ((r->m_zhdr0 & 15) != 8)); + if (!(decomp_flags & TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF)) counter |= (((1U << (8U + (r->m_zhdr0 >> 4))) > 32768U) || ((out_buf_size_mask + 1) < (size_t)(1U << (8U + (r->m_zhdr0 >> 4))))); + if (counter) { TINFL_CR_RETURN_FOREVER(36, TINFL_STATUS_FAILED); } + } + + do + { + TINFL_GET_BITS(3, r->m_final, 3); r->m_type = r->m_final >> 1; + if (r->m_type == 0) + { + TINFL_SKIP_BITS(5, num_bits & 7); + for (counter = 0; counter < 4; ++counter) { if (num_bits) TINFL_GET_BITS(6, r->m_raw_header[counter], 8); else TINFL_GET_BYTE(7, r->m_raw_header[counter]); } + if ((counter = (r->m_raw_header[0] | (r->m_raw_header[1] << 8))) != (mz_uint)(0xFFFF ^ (r->m_raw_header[2] | (r->m_raw_header[3] << 8)))) { TINFL_CR_RETURN_FOREVER(39, TINFL_STATUS_FAILED); } + while ((counter) && (num_bits)) + { + TINFL_GET_BITS(51, dist, 8); + while (pOut_buf_cur >= pOut_buf_end) { TINFL_CR_RETURN(52, TINFL_STATUS_HAS_MORE_OUTPUT); } + *pOut_buf_cur++ = (mz_uint8)dist; + counter--; + } + while (counter) + { + size_t n; while (pOut_buf_cur >= pOut_buf_end) { TINFL_CR_RETURN(9, TINFL_STATUS_HAS_MORE_OUTPUT); } + while (pIn_buf_cur >= pIn_buf_end) + { + if (decomp_flags & TINFL_FLAG_HAS_MORE_INPUT) + { + TINFL_CR_RETURN(38, TINFL_STATUS_NEEDS_MORE_INPUT); + } + else + { + TINFL_CR_RETURN_FOREVER(40, TINFL_STATUS_FAILED); + } + } + n = MZ_MIN(MZ_MIN((size_t)(pOut_buf_end - pOut_buf_cur), (size_t)(pIn_buf_end - pIn_buf_cur)), counter); + TINFL_MEMCPY(pOut_buf_cur, pIn_buf_cur, n); pIn_buf_cur += n; pOut_buf_cur += n; counter -= (mz_uint)n; + } + } + else if (r->m_type == 3) + { + TINFL_CR_RETURN_FOREVER(10, TINFL_STATUS_FAILED); + } + else + { + if (r->m_type == 1) + { + mz_uint8 *p = r->m_tables[0].m_code_size; mz_uint i; + r->m_table_sizes[0] = 288; r->m_table_sizes[1] = 32; TINFL_MEMSET(r->m_tables[1].m_code_size, 5, 32); + for ( i = 0; i <= 143; ++i) *p++ = 8; for ( ; i <= 255; ++i) *p++ = 9; for ( ; i <= 279; ++i) *p++ = 7; for ( ; i <= 287; ++i) *p++ = 8; + } + else + { + for (counter = 0; counter < 3; counter++) { TINFL_GET_BITS(11, r->m_table_sizes[counter], "\05\05\04"[counter]); r->m_table_sizes[counter] += s_min_table_sizes[counter]; } + MZ_CLEAR_OBJ(r->m_tables[2].m_code_size); for (counter = 0; counter < r->m_table_sizes[2]; counter++) { mz_uint s; TINFL_GET_BITS(14, s, 3); r->m_tables[2].m_code_size[s_length_dezigzag[counter]] = (mz_uint8)s; } + r->m_table_sizes[2] = 19; + } + for ( ; (int)r->m_type >= 0; r->m_type--) + { + int tree_next, tree_cur; tinfl_huff_table *pTable; + mz_uint i, j, used_syms, total, sym_index, next_code[17], total_syms[16]; pTable = &r->m_tables[r->m_type]; MZ_CLEAR_OBJ(total_syms); MZ_CLEAR_OBJ(pTable->m_look_up); MZ_CLEAR_OBJ(pTable->m_tree); + for (i = 0; i < r->m_table_sizes[r->m_type]; ++i) total_syms[pTable->m_code_size[i]]++; + used_syms = 0, total = 0; next_code[0] = next_code[1] = 0; + for (i = 1; i <= 15; ++i) { used_syms += total_syms[i]; next_code[i + 1] = (total = ((total + total_syms[i]) << 1)); } + if ((65536 != total) && (used_syms > 1)) + { + TINFL_CR_RETURN_FOREVER(35, TINFL_STATUS_FAILED); + } + for (tree_next = -1, sym_index = 0; sym_index < r->m_table_sizes[r->m_type]; ++sym_index) + { + mz_uint rev_code = 0, l, cur_code, code_size = pTable->m_code_size[sym_index]; if (!code_size) continue; + cur_code = next_code[code_size]++; for (l = code_size; l > 0; l--, cur_code >>= 1) rev_code = (rev_code << 1) | (cur_code & 1); + if (code_size <= TINFL_FAST_LOOKUP_BITS) { mz_int16 k = (mz_int16)((code_size << 9) | sym_index); while (rev_code < TINFL_FAST_LOOKUP_SIZE) { pTable->m_look_up[rev_code] = k; rev_code += (1 << code_size); } continue; } + if (0 == (tree_cur = pTable->m_look_up[rev_code & (TINFL_FAST_LOOKUP_SIZE - 1)])) { pTable->m_look_up[rev_code & (TINFL_FAST_LOOKUP_SIZE - 1)] = (mz_int16)tree_next; tree_cur = tree_next; tree_next -= 2; } + rev_code >>= (TINFL_FAST_LOOKUP_BITS - 1); + for (j = code_size; j > (TINFL_FAST_LOOKUP_BITS + 1); j--) + { + tree_cur -= ((rev_code >>= 1) & 1); + if (!pTable->m_tree[-tree_cur - 1]) { pTable->m_tree[-tree_cur - 1] = (mz_int16)tree_next; tree_cur = tree_next; tree_next -= 2; } else tree_cur = pTable->m_tree[-tree_cur - 1]; + } + tree_cur -= ((rev_code >>= 1) & 1); pTable->m_tree[-tree_cur - 1] = (mz_int16)sym_index; + } + if (r->m_type == 2) + { + for (counter = 0; counter < (r->m_table_sizes[0] + r->m_table_sizes[1]); ) + { + mz_uint s; TINFL_HUFF_DECODE(16, dist, &r->m_tables[2]); if (dist < 16) { r->m_len_codes[counter++] = (mz_uint8)dist; continue; } + if ((dist == 16) && (!counter)) + { + TINFL_CR_RETURN_FOREVER(17, TINFL_STATUS_FAILED); + } + num_extra = "\02\03\07"[dist - 16]; TINFL_GET_BITS(18, s, num_extra); s += "\03\03\013"[dist - 16]; + TINFL_MEMSET(r->m_len_codes + counter, (dist == 16) ? r->m_len_codes[counter - 1] : 0, s); counter += s; + } + if ((r->m_table_sizes[0] + r->m_table_sizes[1]) != counter) + { + TINFL_CR_RETURN_FOREVER(21, TINFL_STATUS_FAILED); + } + TINFL_MEMCPY(r->m_tables[0].m_code_size, r->m_len_codes, r->m_table_sizes[0]); TINFL_MEMCPY(r->m_tables[1].m_code_size, r->m_len_codes + r->m_table_sizes[0], r->m_table_sizes[1]); + } + } + for ( ; ; ) + { + mz_uint8 *pSrc; + for ( ; ; ) + { + if (((pIn_buf_end - pIn_buf_cur) < 4) || ((pOut_buf_end - pOut_buf_cur) < 2)) + { + TINFL_HUFF_DECODE(23, counter, &r->m_tables[0]); + if (counter >= 256) + break; + while (pOut_buf_cur >= pOut_buf_end) { TINFL_CR_RETURN(24, TINFL_STATUS_HAS_MORE_OUTPUT); } + *pOut_buf_cur++ = (mz_uint8)counter; + } + else + { + int sym2; mz_uint code_len; +#if TINFL_USE_64BIT_BITBUF + if (num_bits < 30) { bit_buf |= (((tinfl_bit_buf_t)MZ_READ_LE32(pIn_buf_cur)) << num_bits); pIn_buf_cur += 4; num_bits += 32; } +#else + if (num_bits < 15) { bit_buf |= (((tinfl_bit_buf_t)MZ_READ_LE16(pIn_buf_cur)) << num_bits); pIn_buf_cur += 2; num_bits += 16; } +#endif + if ((sym2 = r->m_tables[0].m_look_up[bit_buf & (TINFL_FAST_LOOKUP_SIZE - 1)]) >= 0) + code_len = sym2 >> 9; + else + { + code_len = TINFL_FAST_LOOKUP_BITS; do { sym2 = r->m_tables[0].m_tree[~sym2 + ((bit_buf >> code_len++) & 1)]; } while (sym2 < 0); + } + counter = sym2; bit_buf >>= code_len; num_bits -= code_len; + if (counter & 256) + break; + +#if !TINFL_USE_64BIT_BITBUF + if (num_bits < 15) { bit_buf |= (((tinfl_bit_buf_t)MZ_READ_LE16(pIn_buf_cur)) << num_bits); pIn_buf_cur += 2; num_bits += 16; } +#endif + if ((sym2 = r->m_tables[0].m_look_up[bit_buf & (TINFL_FAST_LOOKUP_SIZE - 1)]) >= 0) + code_len = sym2 >> 9; + else + { + code_len = TINFL_FAST_LOOKUP_BITS; do { sym2 = r->m_tables[0].m_tree[~sym2 + ((bit_buf >> code_len++) & 1)]; } while (sym2 < 0); + } + bit_buf >>= code_len; num_bits -= code_len; + + pOut_buf_cur[0] = (mz_uint8)counter; + if (sym2 & 256) + { + pOut_buf_cur++; + counter = sym2; + break; + } + pOut_buf_cur[1] = (mz_uint8)sym2; + pOut_buf_cur += 2; + } + } + if ((counter &= 511) == 256) break; + + num_extra = s_length_extra[counter - 257]; counter = s_length_base[counter - 257]; + if (num_extra) { mz_uint extra_bits; TINFL_GET_BITS(25, extra_bits, num_extra); counter += extra_bits; } + + TINFL_HUFF_DECODE(26, dist, &r->m_tables[1]); + num_extra = s_dist_extra[dist]; dist = s_dist_base[dist]; + if (num_extra) { mz_uint extra_bits; TINFL_GET_BITS(27, extra_bits, num_extra); dist += extra_bits; } + + dist_from_out_buf_start = pOut_buf_cur - pOut_buf_start; + if ((dist > dist_from_out_buf_start) && (decomp_flags & TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF)) + { + TINFL_CR_RETURN_FOREVER(37, TINFL_STATUS_FAILED); + } + + pSrc = pOut_buf_start + ((dist_from_out_buf_start - dist) & out_buf_size_mask); + + if ((MZ_MAX(pOut_buf_cur, pSrc) + counter) > pOut_buf_end) + { + while (counter--) + { + while (pOut_buf_cur >= pOut_buf_end) { TINFL_CR_RETURN(53, TINFL_STATUS_HAS_MORE_OUTPUT); } + *pOut_buf_cur++ = pOut_buf_start[(dist_from_out_buf_start++ - dist) & out_buf_size_mask]; + } + continue; + } +#if MINIZ_USE_UNALIGNED_LOADS_AND_STORES + else if ((counter >= 9) && (counter <= dist)) + { + const mz_uint8 *pSrc_end = pSrc + (counter & ~7); + do + { + ((mz_uint32 *)pOut_buf_cur)[0] = ((const mz_uint32 *)pSrc)[0]; + ((mz_uint32 *)pOut_buf_cur)[1] = ((const mz_uint32 *)pSrc)[1]; + pOut_buf_cur += 8; + } while ((pSrc += 8) < pSrc_end); + if ((counter &= 7) < 3) + { + if (counter) + { + pOut_buf_cur[0] = pSrc[0]; + if (counter > 1) + pOut_buf_cur[1] = pSrc[1]; + pOut_buf_cur += counter; + } + continue; + } + } +#endif + do + { + pOut_buf_cur[0] = pSrc[0]; + pOut_buf_cur[1] = pSrc[1]; + pOut_buf_cur[2] = pSrc[2]; + pOut_buf_cur += 3; pSrc += 3; + } while ((int)(counter -= 3) > 2); + if ((int)counter > 0) + { + pOut_buf_cur[0] = pSrc[0]; + if ((int)counter > 1) + pOut_buf_cur[1] = pSrc[1]; + pOut_buf_cur += counter; + } + } + } + } while (!(r->m_final & 1)); + if (decomp_flags & TINFL_FLAG_PARSE_ZLIB_HEADER) + { + TINFL_SKIP_BITS(32, num_bits & 7); for (counter = 0; counter < 4; ++counter) { mz_uint s; if (num_bits) TINFL_GET_BITS(41, s, 8); else TINFL_GET_BYTE(42, s); r->m_z_adler32 = (r->m_z_adler32 << 8) | s; } + } + TINFL_CR_RETURN_FOREVER(34, TINFL_STATUS_DONE); + TINFL_CR_FINISH + +common_exit: + r->m_num_bits = num_bits; r->m_bit_buf = bit_buf; r->m_dist = dist; r->m_counter = counter; r->m_num_extra = num_extra; r->m_dist_from_out_buf_start = dist_from_out_buf_start; + *pIn_buf_size = pIn_buf_cur - pIn_buf_next; *pOut_buf_size = pOut_buf_cur - pOut_buf_next; + if ((decomp_flags & (TINFL_FLAG_PARSE_ZLIB_HEADER | TINFL_FLAG_COMPUTE_ADLER32)) && (status >= 0)) + { + const mz_uint8 *ptr = pOut_buf_next; size_t buf_len = *pOut_buf_size; + mz_uint32 i, s1 = r->m_check_adler32 & 0xffff, s2 = r->m_check_adler32 >> 16; size_t block_len = buf_len % 5552; + while (buf_len) + { + for (i = 0; i + 7 < block_len; i += 8, ptr += 8) + { + s1 += ptr[0], s2 += s1; s1 += ptr[1], s2 += s1; s1 += ptr[2], s2 += s1; s1 += ptr[3], s2 += s1; + s1 += ptr[4], s2 += s1; s1 += ptr[5], s2 += s1; s1 += ptr[6], s2 += s1; s1 += ptr[7], s2 += s1; + } + for ( ; i < block_len; ++i) s1 += *ptr++, s2 += s1; + s1 %= 65521U, s2 %= 65521U; buf_len -= block_len; block_len = 5552; + } + r->m_check_adler32 = (s2 << 16) + s1; if ((status == TINFL_STATUS_DONE) && (decomp_flags & TINFL_FLAG_PARSE_ZLIB_HEADER) && (r->m_check_adler32 != r->m_z_adler32)) status = TINFL_STATUS_ADLER32_MISMATCH; + } + return status; +} + +// Higher level helper functions. +void *tinfl_decompress_mem_to_heap(const void *pSrc_buf, size_t src_buf_len, size_t *pOut_len, int flags) +{ + tinfl_decompressor decomp; void *pBuf = NULL, *pNew_buf; size_t src_buf_ofs = 0, out_buf_capacity = 0; + *pOut_len = 0; + tinfl_init(&decomp); + for ( ; ; ) + { + size_t src_buf_size = src_buf_len - src_buf_ofs, dst_buf_size = out_buf_capacity - *pOut_len, new_out_buf_capacity; + tinfl_status status = tinfl_decompress(&decomp, (const mz_uint8*)pSrc_buf + src_buf_ofs, &src_buf_size, (mz_uint8*)pBuf, pBuf ? (mz_uint8*)pBuf + *pOut_len : NULL, &dst_buf_size, + (flags & ~TINFL_FLAG_HAS_MORE_INPUT) | TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF); + if ((status < 0) || (status == TINFL_STATUS_NEEDS_MORE_INPUT)) + { + MZ_FREE(pBuf); *pOut_len = 0; return NULL; + } + src_buf_ofs += src_buf_size; + *pOut_len += dst_buf_size; + if (status == TINFL_STATUS_DONE) break; + new_out_buf_capacity = out_buf_capacity * 2; if (new_out_buf_capacity < 128) new_out_buf_capacity = 128; + pNew_buf = MZ_REALLOC(pBuf, new_out_buf_capacity); + if (!pNew_buf) + { + MZ_FREE(pBuf); *pOut_len = 0; return NULL; + } + pBuf = pNew_buf; out_buf_capacity = new_out_buf_capacity; + } + return pBuf; +} + +size_t tinfl_decompress_mem_to_mem(void *pOut_buf, size_t out_buf_len, const void *pSrc_buf, size_t src_buf_len, int flags) +{ + tinfl_decompressor decomp; tinfl_status status; tinfl_init(&decomp); + status = tinfl_decompress(&decomp, (const mz_uint8*)pSrc_buf, &src_buf_len, (mz_uint8*)pOut_buf, (mz_uint8*)pOut_buf, &out_buf_len, (flags & ~TINFL_FLAG_HAS_MORE_INPUT) | TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF); + return (status != TINFL_STATUS_DONE) ? TINFL_DECOMPRESS_MEM_TO_MEM_FAILED : out_buf_len; +} + +int tinfl_decompress_mem_to_callback(const void *pIn_buf, size_t *pIn_buf_size, tinfl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags) +{ + int result = 0; + tinfl_decompressor decomp; + mz_uint8 *pDict = (mz_uint8*)MZ_MALLOC(TINFL_LZ_DICT_SIZE); size_t in_buf_ofs = 0, dict_ofs = 0; + if (!pDict) + return TINFL_STATUS_FAILED; + tinfl_init(&decomp); + for ( ; ; ) + { + size_t in_buf_size = *pIn_buf_size - in_buf_ofs, dst_buf_size = TINFL_LZ_DICT_SIZE - dict_ofs; + tinfl_status status = tinfl_decompress(&decomp, (const mz_uint8*)pIn_buf + in_buf_ofs, &in_buf_size, pDict, pDict + dict_ofs, &dst_buf_size, + (flags & ~(TINFL_FLAG_HAS_MORE_INPUT | TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF))); + in_buf_ofs += in_buf_size; + if ((dst_buf_size) && (!(*pPut_buf_func)(pDict + dict_ofs, (int)dst_buf_size, pPut_buf_user))) + break; + if (status != TINFL_STATUS_HAS_MORE_OUTPUT) + { + result = (status == TINFL_STATUS_DONE); + break; + } + dict_ofs = (dict_ofs + dst_buf_size) & (TINFL_LZ_DICT_SIZE - 1); + } + MZ_FREE(pDict); + *pIn_buf_size = in_buf_ofs; + return result; +} + +// ------------------- Low-level Compression (independent from all decompression API's) + +// Purposely making these tables static for faster init and thread safety. +static const mz_uint16 s_tdefl_len_sym[256] = { + 257,258,259,260,261,262,263,264,265,265,266,266,267,267,268,268,269,269,269,269,270,270,270,270,271,271,271,271,272,272,272,272, + 273,273,273,273,273,273,273,273,274,274,274,274,274,274,274,274,275,275,275,275,275,275,275,275,276,276,276,276,276,276,276,276, + 277,277,277,277,277,277,277,277,277,277,277,277,277,277,277,277,278,278,278,278,278,278,278,278,278,278,278,278,278,278,278,278, + 279,279,279,279,279,279,279,279,279,279,279,279,279,279,279,279,280,280,280,280,280,280,280,280,280,280,280,280,280,280,280,280, + 281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281,281, + 282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282,282, + 283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283,283, + 284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,284,285 }; + +static const mz_uint8 s_tdefl_len_extra[256] = { + 0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, + 4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4, + 5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5, + 5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,0 }; + +static const mz_uint8 s_tdefl_small_dist_sym[512] = { + 0,1,2,3,4,4,5,5,6,6,6,6,7,7,7,7,8,8,8,8,8,8,8,8,9,9,9,9,9,9,9,9,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,11,11,11,11,11,11, + 11,11,11,11,11,11,11,11,11,11,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,13, + 13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,14,14,14,14,14,14,14,14,14,14,14,14, + 14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14, + 14,14,14,14,14,14,14,14,14,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15, + 15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,16,16,16,16,16,16,16,16,16,16,16,16,16, + 16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16, + 16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16, + 16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,17,17,17,17,17,17,17,17,17,17,17,17,17,17, + 17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17, + 17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17, + 17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17 }; + +static const mz_uint8 s_tdefl_small_dist_extra[512] = { + 0,0,0,0,1,1,1,1,2,2,2,2,2,2,2,2,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5, + 5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6, + 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6, + 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, + 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, + 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, + 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, + 7,7,7,7,7,7,7,7 }; + +static const mz_uint8 s_tdefl_large_dist_sym[128] = { + 0,0,18,19,20,20,21,21,22,22,22,22,23,23,23,23,24,24,24,24,24,24,24,24,25,25,25,25,25,25,25,25,26,26,26,26,26,26,26,26,26,26,26,26, + 26,26,26,26,27,27,27,27,27,27,27,27,27,27,27,27,27,27,27,27,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28, + 28,28,28,28,28,28,28,28,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 }; + +static const mz_uint8 s_tdefl_large_dist_extra[128] = { + 0,0,8,8,9,9,9,9,10,10,10,10,10,10,10,10,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12, + 12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13, + 13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13 }; + +// Radix sorts tdefl_sym_freq[] array by 16-bit key m_key. Returns ptr to sorted values. +typedef struct { mz_uint16 m_key, m_sym_index; } tdefl_sym_freq; +static tdefl_sym_freq* tdefl_radix_sort_syms(mz_uint num_syms, tdefl_sym_freq* pSyms0, tdefl_sym_freq* pSyms1) +{ + mz_uint32 total_passes = 2, pass_shift, pass, i, hist[256 * 2]; tdefl_sym_freq* pCur_syms = pSyms0, *pNew_syms = pSyms1; MZ_CLEAR_OBJ(hist); + for (i = 0; i < num_syms; i++) { mz_uint freq = pSyms0[i].m_key; hist[freq & 0xFF]++; hist[256 + ((freq >> 8) & 0xFF)]++; } + while ((total_passes > 1) && (num_syms == hist[(total_passes - 1) * 256])) total_passes--; + for (pass_shift = 0, pass = 0; pass < total_passes; pass++, pass_shift += 8) + { + const mz_uint32* pHist = &hist[pass << 8]; + mz_uint offsets[256], cur_ofs = 0; + for (i = 0; i < 256; i++) { offsets[i] = cur_ofs; cur_ofs += pHist[i]; } + for (i = 0; i < num_syms; i++) pNew_syms[offsets[(pCur_syms[i].m_key >> pass_shift) & 0xFF]++] = pCur_syms[i]; + { tdefl_sym_freq* t = pCur_syms; pCur_syms = pNew_syms; pNew_syms = t; } + } + return pCur_syms; +} + +// tdefl_calculate_minimum_redundancy() originally written by: Alistair Moffat, alistair@cs.mu.oz.au, Jyrki Katajainen, jyrki@diku.dk, November 1996. +static void tdefl_calculate_minimum_redundancy(tdefl_sym_freq *A, int n) +{ + int root, leaf, next, avbl, used, dpth; + if (n==0) return; else if (n==1) { A[0].m_key = 1; return; } + A[0].m_key += A[1].m_key; root = 0; leaf = 2; + for (next=1; next < n-1; next++) + { + if (leaf>=n || A[root].m_key=n || (root=0; next--) A[next].m_key = A[A[next].m_key].m_key+1; + avbl = 1; used = dpth = 0; root = n-2; next = n-1; + while (avbl>0) + { + while (root>=0 && (int)A[root].m_key==dpth) { used++; root--; } + while (avbl>used) { A[next--].m_key = (mz_uint16)(dpth); avbl--; } + avbl = 2*used; dpth++; used = 0; + } +} + +// Limits canonical Huffman code table's max code size. +enum { TDEFL_MAX_SUPPORTED_HUFF_CODESIZE = 32 }; +static void tdefl_huffman_enforce_max_code_size(int *pNum_codes, int code_list_len, int max_code_size) +{ + int i; mz_uint32 total = 0; if (code_list_len <= 1) return; + for (i = max_code_size + 1; i <= TDEFL_MAX_SUPPORTED_HUFF_CODESIZE; i++) pNum_codes[max_code_size] += pNum_codes[i]; + for (i = max_code_size; i > 0; i--) total += (((mz_uint32)pNum_codes[i]) << (max_code_size - i)); + while (total != (1UL << max_code_size)) + { + pNum_codes[max_code_size]--; + for (i = max_code_size - 1; i > 0; i--) if (pNum_codes[i]) { pNum_codes[i]--; pNum_codes[i + 1] += 2; break; } + total--; + } +} + +static void tdefl_optimize_huffman_table(tdefl_compressor *d, int table_num, int table_len, int code_size_limit, int static_table) +{ + int i, j, l, num_codes[1 + TDEFL_MAX_SUPPORTED_HUFF_CODESIZE]; mz_uint next_code[TDEFL_MAX_SUPPORTED_HUFF_CODESIZE + 1]; MZ_CLEAR_OBJ(num_codes); + if (static_table) + { + for (i = 0; i < table_len; i++) num_codes[d->m_huff_code_sizes[table_num][i]]++; + } + else + { + tdefl_sym_freq syms0[TDEFL_MAX_HUFF_SYMBOLS], syms1[TDEFL_MAX_HUFF_SYMBOLS], *pSyms; + int num_used_syms = 0; + const mz_uint16 *pSym_count = &d->m_huff_count[table_num][0]; + for (i = 0; i < table_len; i++) if (pSym_count[i]) { syms0[num_used_syms].m_key = (mz_uint16)pSym_count[i]; syms0[num_used_syms++].m_sym_index = (mz_uint16)i; } + + pSyms = tdefl_radix_sort_syms(num_used_syms, syms0, syms1); tdefl_calculate_minimum_redundancy(pSyms, num_used_syms); + + for (i = 0; i < num_used_syms; i++) num_codes[pSyms[i].m_key]++; + + tdefl_huffman_enforce_max_code_size(num_codes, num_used_syms, code_size_limit); + + MZ_CLEAR_OBJ(d->m_huff_code_sizes[table_num]); MZ_CLEAR_OBJ(d->m_huff_codes[table_num]); + for (i = 1, j = num_used_syms; i <= code_size_limit; i++) + for (l = num_codes[i]; l > 0; l--) d->m_huff_code_sizes[table_num][pSyms[--j].m_sym_index] = (mz_uint8)(i); + } + + next_code[1] = 0; for (j = 0, i = 2; i <= code_size_limit; i++) next_code[i] = j = ((j + num_codes[i - 1]) << 1); + + for (i = 0; i < table_len; i++) + { + mz_uint rev_code = 0, code, code_size; if ((code_size = d->m_huff_code_sizes[table_num][i]) == 0) continue; + code = next_code[code_size]++; for (l = code_size; l > 0; l--, code >>= 1) rev_code = (rev_code << 1) | (code & 1); + d->m_huff_codes[table_num][i] = (mz_uint16)rev_code; + } +} + +#define TDEFL_PUT_BITS(b, l) do { \ + mz_uint bits = b; mz_uint len = l; MZ_ASSERT(bits <= ((1U << len) - 1U)); \ + d->m_bit_buffer |= (bits << d->m_bits_in); d->m_bits_in += len; \ + while (d->m_bits_in >= 8) { \ + if (d->m_pOutput_buf < d->m_pOutput_buf_end) \ + *d->m_pOutput_buf++ = (mz_uint8)(d->m_bit_buffer); \ + d->m_bit_buffer >>= 8; \ + d->m_bits_in -= 8; \ + } \ +} MZ_MACRO_END + +#define TDEFL_RLE_PREV_CODE_SIZE() { if (rle_repeat_count) { \ + if (rle_repeat_count < 3) { \ + d->m_huff_count[2][prev_code_size] = (mz_uint16)(d->m_huff_count[2][prev_code_size] + rle_repeat_count); \ + while (rle_repeat_count--) packed_code_sizes[num_packed_code_sizes++] = prev_code_size; \ + } else { \ + d->m_huff_count[2][16] = (mz_uint16)(d->m_huff_count[2][16] + 1); packed_code_sizes[num_packed_code_sizes++] = 16; packed_code_sizes[num_packed_code_sizes++] = (mz_uint8)(rle_repeat_count - 3); \ +} rle_repeat_count = 0; } } + +#define TDEFL_RLE_ZERO_CODE_SIZE() { if (rle_z_count) { \ + if (rle_z_count < 3) { \ + d->m_huff_count[2][0] = (mz_uint16)(d->m_huff_count[2][0] + rle_z_count); while (rle_z_count--) packed_code_sizes[num_packed_code_sizes++] = 0; \ + } else if (rle_z_count <= 10) { \ + d->m_huff_count[2][17] = (mz_uint16)(d->m_huff_count[2][17] + 1); packed_code_sizes[num_packed_code_sizes++] = 17; packed_code_sizes[num_packed_code_sizes++] = (mz_uint8)(rle_z_count - 3); \ + } else { \ + d->m_huff_count[2][18] = (mz_uint16)(d->m_huff_count[2][18] + 1); packed_code_sizes[num_packed_code_sizes++] = 18; packed_code_sizes[num_packed_code_sizes++] = (mz_uint8)(rle_z_count - 11); \ +} rle_z_count = 0; } } + +static mz_uint8 s_tdefl_packed_code_size_syms_swizzle[] = { 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 }; + +static void tdefl_start_dynamic_block(tdefl_compressor *d) +{ + int num_lit_codes, num_dist_codes, num_bit_lengths; mz_uint i, total_code_sizes_to_pack, num_packed_code_sizes, rle_z_count, rle_repeat_count, packed_code_sizes_index; + mz_uint8 code_sizes_to_pack[TDEFL_MAX_HUFF_SYMBOLS_0 + TDEFL_MAX_HUFF_SYMBOLS_1], packed_code_sizes[TDEFL_MAX_HUFF_SYMBOLS_0 + TDEFL_MAX_HUFF_SYMBOLS_1], prev_code_size = 0xFF; + + d->m_huff_count[0][256] = 1; + + tdefl_optimize_huffman_table(d, 0, TDEFL_MAX_HUFF_SYMBOLS_0, 15, MZ_FALSE); + tdefl_optimize_huffman_table(d, 1, TDEFL_MAX_HUFF_SYMBOLS_1, 15, MZ_FALSE); + + for (num_lit_codes = 286; num_lit_codes > 257; num_lit_codes--) if (d->m_huff_code_sizes[0][num_lit_codes - 1]) break; + for (num_dist_codes = 30; num_dist_codes > 1; num_dist_codes--) if (d->m_huff_code_sizes[1][num_dist_codes - 1]) break; + + memcpy(code_sizes_to_pack, &d->m_huff_code_sizes[0][0], num_lit_codes); + memcpy(code_sizes_to_pack + num_lit_codes, &d->m_huff_code_sizes[1][0], num_dist_codes); + total_code_sizes_to_pack = num_lit_codes + num_dist_codes; num_packed_code_sizes = 0; rle_z_count = 0; rle_repeat_count = 0; + + memset(&d->m_huff_count[2][0], 0, sizeof(d->m_huff_count[2][0]) * TDEFL_MAX_HUFF_SYMBOLS_2); + for (i = 0; i < total_code_sizes_to_pack; i++) + { + mz_uint8 code_size = code_sizes_to_pack[i]; + if (!code_size) + { + TDEFL_RLE_PREV_CODE_SIZE(); + if (++rle_z_count == 138) { TDEFL_RLE_ZERO_CODE_SIZE(); } + } + else + { + TDEFL_RLE_ZERO_CODE_SIZE(); + if (code_size != prev_code_size) + { + TDEFL_RLE_PREV_CODE_SIZE(); + d->m_huff_count[2][code_size] = (mz_uint16)(d->m_huff_count[2][code_size] + 1); packed_code_sizes[num_packed_code_sizes++] = code_size; + } + else if (++rle_repeat_count == 6) + { + TDEFL_RLE_PREV_CODE_SIZE(); + } + } + prev_code_size = code_size; + } + if (rle_repeat_count) { TDEFL_RLE_PREV_CODE_SIZE(); } else { TDEFL_RLE_ZERO_CODE_SIZE(); } + + tdefl_optimize_huffman_table(d, 2, TDEFL_MAX_HUFF_SYMBOLS_2, 7, MZ_FALSE); + + TDEFL_PUT_BITS(2, 2); + + TDEFL_PUT_BITS(num_lit_codes - 257, 5); + TDEFL_PUT_BITS(num_dist_codes - 1, 5); + + for (num_bit_lengths = 18; num_bit_lengths >= 0; num_bit_lengths--) if (d->m_huff_code_sizes[2][s_tdefl_packed_code_size_syms_swizzle[num_bit_lengths]]) break; + num_bit_lengths = MZ_MAX(4, (num_bit_lengths + 1)); TDEFL_PUT_BITS(num_bit_lengths - 4, 4); + for (i = 0; (int)i < num_bit_lengths; i++) TDEFL_PUT_BITS(d->m_huff_code_sizes[2][s_tdefl_packed_code_size_syms_swizzle[i]], 3); + + for (packed_code_sizes_index = 0; packed_code_sizes_index < num_packed_code_sizes; ) + { + mz_uint code = packed_code_sizes[packed_code_sizes_index++]; MZ_ASSERT(code < TDEFL_MAX_HUFF_SYMBOLS_2); + TDEFL_PUT_BITS(d->m_huff_codes[2][code], d->m_huff_code_sizes[2][code]); + if (code >= 16) TDEFL_PUT_BITS(packed_code_sizes[packed_code_sizes_index++], "\02\03\07"[code - 16]); + } +} + +static void tdefl_start_static_block(tdefl_compressor *d) +{ + mz_uint i; + mz_uint8 *p = &d->m_huff_code_sizes[0][0]; + + for (i = 0; i <= 143; ++i) *p++ = 8; + for ( ; i <= 255; ++i) *p++ = 9; + for ( ; i <= 279; ++i) *p++ = 7; + for ( ; i <= 287; ++i) *p++ = 8; + + memset(d->m_huff_code_sizes[1], 5, 32); + + tdefl_optimize_huffman_table(d, 0, 288, 15, MZ_TRUE); + tdefl_optimize_huffman_table(d, 1, 32, 15, MZ_TRUE); + + TDEFL_PUT_BITS(1, 2); +} + +static const mz_uint mz_bitmasks[17] = { 0x0000, 0x0001, 0x0003, 0x0007, 0x000F, 0x001F, 0x003F, 0x007F, 0x00FF, 0x01FF, 0x03FF, 0x07FF, 0x0FFF, 0x1FFF, 0x3FFF, 0x7FFF, 0xFFFF }; + +#if MINIZ_USE_UNALIGNED_LOADS_AND_STORES && MINIZ_LITTLE_ENDIAN && MINIZ_HAS_64BIT_REGISTERS +static mz_bool tdefl_compress_lz_codes(tdefl_compressor *d) +{ + mz_uint flags; + mz_uint8 *pLZ_codes; + mz_uint8 *pOutput_buf = d->m_pOutput_buf; + mz_uint8 *pLZ_code_buf_end = d->m_pLZ_code_buf; + mz_uint64 bit_buffer = d->m_bit_buffer; + mz_uint bits_in = d->m_bits_in; + +#define TDEFL_PUT_BITS_FAST(b, l) { bit_buffer |= (((mz_uint64)(b)) << bits_in); bits_in += (l); } + + flags = 1; + for (pLZ_codes = d->m_lz_code_buf; pLZ_codes < pLZ_code_buf_end; flags >>= 1) + { + if (flags == 1) + flags = *pLZ_codes++ | 0x100; + + if (flags & 1) + { + mz_uint s0, s1, n0, n1, sym, num_extra_bits; + mz_uint match_len = pLZ_codes[0], match_dist = *(const mz_uint16 *)(pLZ_codes + 1); pLZ_codes += 3; + + MZ_ASSERT(d->m_huff_code_sizes[0][s_tdefl_len_sym[match_len]]); + TDEFL_PUT_BITS_FAST(d->m_huff_codes[0][s_tdefl_len_sym[match_len]], d->m_huff_code_sizes[0][s_tdefl_len_sym[match_len]]); + TDEFL_PUT_BITS_FAST(match_len & mz_bitmasks[s_tdefl_len_extra[match_len]], s_tdefl_len_extra[match_len]); + + // This sequence coaxes MSVC into using cmov's vs. jmp's. + s0 = s_tdefl_small_dist_sym[match_dist & 511]; + n0 = s_tdefl_small_dist_extra[match_dist & 511]; + s1 = s_tdefl_large_dist_sym[match_dist >> 8]; + n1 = s_tdefl_large_dist_extra[match_dist >> 8]; + sym = (match_dist < 512) ? s0 : s1; + num_extra_bits = (match_dist < 512) ? n0 : n1; + + MZ_ASSERT(d->m_huff_code_sizes[1][sym]); + TDEFL_PUT_BITS_FAST(d->m_huff_codes[1][sym], d->m_huff_code_sizes[1][sym]); + TDEFL_PUT_BITS_FAST(match_dist & mz_bitmasks[num_extra_bits], num_extra_bits); + } + else + { + mz_uint lit = *pLZ_codes++; + MZ_ASSERT(d->m_huff_code_sizes[0][lit]); + TDEFL_PUT_BITS_FAST(d->m_huff_codes[0][lit], d->m_huff_code_sizes[0][lit]); + + if (((flags & 2) == 0) && (pLZ_codes < pLZ_code_buf_end)) + { + flags >>= 1; + lit = *pLZ_codes++; + MZ_ASSERT(d->m_huff_code_sizes[0][lit]); + TDEFL_PUT_BITS_FAST(d->m_huff_codes[0][lit], d->m_huff_code_sizes[0][lit]); + + if (((flags & 2) == 0) && (pLZ_codes < pLZ_code_buf_end)) + { + flags >>= 1; + lit = *pLZ_codes++; + MZ_ASSERT(d->m_huff_code_sizes[0][lit]); + TDEFL_PUT_BITS_FAST(d->m_huff_codes[0][lit], d->m_huff_code_sizes[0][lit]); + } + } + } + + if (pOutput_buf >= d->m_pOutput_buf_end) + return MZ_FALSE; + + *(mz_uint64*)pOutput_buf = bit_buffer; + pOutput_buf += (bits_in >> 3); + bit_buffer >>= (bits_in & ~7); + bits_in &= 7; + } + +#undef TDEFL_PUT_BITS_FAST + + d->m_pOutput_buf = pOutput_buf; + d->m_bits_in = 0; + d->m_bit_buffer = 0; + + while (bits_in) + { + mz_uint32 n = MZ_MIN(bits_in, 16); + TDEFL_PUT_BITS((mz_uint)bit_buffer & mz_bitmasks[n], n); + bit_buffer >>= n; + bits_in -= n; + } + + TDEFL_PUT_BITS(d->m_huff_codes[0][256], d->m_huff_code_sizes[0][256]); + + return (d->m_pOutput_buf < d->m_pOutput_buf_end); +} +#else +static mz_bool tdefl_compress_lz_codes(tdefl_compressor *d) +{ + mz_uint flags; + mz_uint8 *pLZ_codes; + + flags = 1; + for (pLZ_codes = d->m_lz_code_buf; pLZ_codes < d->m_pLZ_code_buf; flags >>= 1) + { + if (flags == 1) + flags = *pLZ_codes++ | 0x100; + if (flags & 1) + { + mz_uint sym, num_extra_bits; + mz_uint match_len = pLZ_codes[0], match_dist = (pLZ_codes[1] | (pLZ_codes[2] << 8)); pLZ_codes += 3; + + MZ_ASSERT(d->m_huff_code_sizes[0][s_tdefl_len_sym[match_len]]); + TDEFL_PUT_BITS(d->m_huff_codes[0][s_tdefl_len_sym[match_len]], d->m_huff_code_sizes[0][s_tdefl_len_sym[match_len]]); + TDEFL_PUT_BITS(match_len & mz_bitmasks[s_tdefl_len_extra[match_len]], s_tdefl_len_extra[match_len]); + + if (match_dist < 512) + { + sym = s_tdefl_small_dist_sym[match_dist]; num_extra_bits = s_tdefl_small_dist_extra[match_dist]; + } + else + { + sym = s_tdefl_large_dist_sym[match_dist >> 8]; num_extra_bits = s_tdefl_large_dist_extra[match_dist >> 8]; + } + MZ_ASSERT(d->m_huff_code_sizes[1][sym]); + TDEFL_PUT_BITS(d->m_huff_codes[1][sym], d->m_huff_code_sizes[1][sym]); + TDEFL_PUT_BITS(match_dist & mz_bitmasks[num_extra_bits], num_extra_bits); + } + else + { + mz_uint lit = *pLZ_codes++; + MZ_ASSERT(d->m_huff_code_sizes[0][lit]); + TDEFL_PUT_BITS(d->m_huff_codes[0][lit], d->m_huff_code_sizes[0][lit]); + } + } + + TDEFL_PUT_BITS(d->m_huff_codes[0][256], d->m_huff_code_sizes[0][256]); + + return (d->m_pOutput_buf < d->m_pOutput_buf_end); +} +#endif // MINIZ_USE_UNALIGNED_LOADS_AND_STORES && MINIZ_LITTLE_ENDIAN && MINIZ_HAS_64BIT_REGISTERS + +static mz_bool tdefl_compress_block(tdefl_compressor *d, mz_bool static_block) +{ + if (static_block) + tdefl_start_static_block(d); + else + tdefl_start_dynamic_block(d); + return tdefl_compress_lz_codes(d); +} + +static int tdefl_flush_block(tdefl_compressor *d, int flush) +{ + mz_uint saved_bit_buf, saved_bits_in; + mz_uint8 *pSaved_output_buf; + mz_bool comp_block_succeeded = MZ_FALSE; + int n, use_raw_block = ((d->m_flags & TDEFL_FORCE_ALL_RAW_BLOCKS) != 0) && (d->m_lookahead_pos - d->m_lz_code_buf_dict_pos) <= d->m_dict_size; + mz_uint8 *pOutput_buf_start = ((d->m_pPut_buf_func == NULL) && ((*d->m_pOut_buf_size - d->m_out_buf_ofs) >= TDEFL_OUT_BUF_SIZE)) ? ((mz_uint8 *)d->m_pOut_buf + d->m_out_buf_ofs) : d->m_output_buf; + + d->m_pOutput_buf = pOutput_buf_start; + d->m_pOutput_buf_end = d->m_pOutput_buf + TDEFL_OUT_BUF_SIZE - 16; + + MZ_ASSERT(!d->m_output_flush_remaining); + d->m_output_flush_ofs = 0; + d->m_output_flush_remaining = 0; + + *d->m_pLZ_flags = (mz_uint8)(*d->m_pLZ_flags >> d->m_num_flags_left); + d->m_pLZ_code_buf -= (d->m_num_flags_left == 8); + + if ((d->m_flags & TDEFL_WRITE_ZLIB_HEADER) && (!d->m_block_index)) + { + TDEFL_PUT_BITS(0x78, 8); TDEFL_PUT_BITS(0x01, 8); + } + + TDEFL_PUT_BITS(flush == TDEFL_FINISH, 1); + + pSaved_output_buf = d->m_pOutput_buf; saved_bit_buf = d->m_bit_buffer; saved_bits_in = d->m_bits_in; + + if (!use_raw_block) + comp_block_succeeded = tdefl_compress_block(d, (d->m_flags & TDEFL_FORCE_ALL_STATIC_BLOCKS) || (d->m_total_lz_bytes < 48)); + + // If the block gets expanded, forget the current contents of the output buffer and send a raw block instead. + if ( ((use_raw_block) || ((d->m_total_lz_bytes) && ((d->m_pOutput_buf - pSaved_output_buf + 1U) >= d->m_total_lz_bytes))) && + ((d->m_lookahead_pos - d->m_lz_code_buf_dict_pos) <= d->m_dict_size) ) + { + mz_uint i; d->m_pOutput_buf = pSaved_output_buf; d->m_bit_buffer = saved_bit_buf, d->m_bits_in = saved_bits_in; + TDEFL_PUT_BITS(0, 2); + if (d->m_bits_in) { TDEFL_PUT_BITS(0, 8 - d->m_bits_in); } + for (i = 2; i; --i, d->m_total_lz_bytes ^= 0xFFFF) + { + TDEFL_PUT_BITS(d->m_total_lz_bytes & 0xFFFF, 16); + } + for (i = 0; i < d->m_total_lz_bytes; ++i) + { + TDEFL_PUT_BITS(d->m_dict[(d->m_lz_code_buf_dict_pos + i) & TDEFL_LZ_DICT_SIZE_MASK], 8); + } + } + // Check for the extremely unlikely (if not impossible) case of the compressed block not fitting into the output buffer when using dynamic codes. + else if (!comp_block_succeeded) + { + d->m_pOutput_buf = pSaved_output_buf; d->m_bit_buffer = saved_bit_buf, d->m_bits_in = saved_bits_in; + tdefl_compress_block(d, MZ_TRUE); + } + + if (flush) + { + if (flush == TDEFL_FINISH) + { + if (d->m_bits_in) { TDEFL_PUT_BITS(0, 8 - d->m_bits_in); } + if (d->m_flags & TDEFL_WRITE_ZLIB_HEADER) { mz_uint i, a = d->m_adler32; for (i = 0; i < 4; i++) { TDEFL_PUT_BITS((a >> 24) & 0xFF, 8); a <<= 8; } } + } + else + { + mz_uint i, z = 0; TDEFL_PUT_BITS(0, 3); if (d->m_bits_in) { TDEFL_PUT_BITS(0, 8 - d->m_bits_in); } for (i = 2; i; --i, z ^= 0xFFFF) { TDEFL_PUT_BITS(z & 0xFFFF, 16); } + } + } + + MZ_ASSERT(d->m_pOutput_buf < d->m_pOutput_buf_end); + + memset(&d->m_huff_count[0][0], 0, sizeof(d->m_huff_count[0][0]) * TDEFL_MAX_HUFF_SYMBOLS_0); + memset(&d->m_huff_count[1][0], 0, sizeof(d->m_huff_count[1][0]) * TDEFL_MAX_HUFF_SYMBOLS_1); + + d->m_pLZ_code_buf = d->m_lz_code_buf + 1; d->m_pLZ_flags = d->m_lz_code_buf; d->m_num_flags_left = 8; d->m_lz_code_buf_dict_pos += d->m_total_lz_bytes; d->m_total_lz_bytes = 0; d->m_block_index++; + + if ((n = (int)(d->m_pOutput_buf - pOutput_buf_start)) != 0) + { + if (d->m_pPut_buf_func) + { + *d->m_pIn_buf_size = d->m_pSrc - (const mz_uint8 *)d->m_pIn_buf; + if (!(*d->m_pPut_buf_func)(d->m_output_buf, n, d->m_pPut_buf_user)) + return (d->m_prev_return_status = TDEFL_STATUS_PUT_BUF_FAILED); + } + else if (pOutput_buf_start == d->m_output_buf) + { + int bytes_to_copy = (int)MZ_MIN((size_t)n, (size_t)(*d->m_pOut_buf_size - d->m_out_buf_ofs)); + memcpy((mz_uint8 *)d->m_pOut_buf + d->m_out_buf_ofs, d->m_output_buf, bytes_to_copy); + d->m_out_buf_ofs += bytes_to_copy; + if ((n -= bytes_to_copy) != 0) + { + d->m_output_flush_ofs = bytes_to_copy; + d->m_output_flush_remaining = n; + } + } + else + { + d->m_out_buf_ofs += n; + } + } + + return d->m_output_flush_remaining; +} + +#if MINIZ_USE_UNALIGNED_LOADS_AND_STORES +#define TDEFL_READ_UNALIGNED_WORD(p) *(const mz_uint16*)(p) +static MZ_FORCEINLINE void tdefl_find_match(tdefl_compressor *d, mz_uint lookahead_pos, mz_uint max_dist, mz_uint max_match_len, mz_uint *pMatch_dist, mz_uint *pMatch_len) +{ + mz_uint dist, pos = lookahead_pos & TDEFL_LZ_DICT_SIZE_MASK, match_len = *pMatch_len, probe_pos = pos, next_probe_pos, probe_len; + mz_uint num_probes_left = d->m_max_probes[match_len >= 32]; + const mz_uint16 *s = (const mz_uint16*)(d->m_dict + pos), *p, *q; + mz_uint16 c01 = TDEFL_READ_UNALIGNED_WORD(&d->m_dict[pos + match_len - 1]), s01 = TDEFL_READ_UNALIGNED_WORD(s); + MZ_ASSERT(max_match_len <= TDEFL_MAX_MATCH_LEN); if (max_match_len <= match_len) return; + for ( ; ; ) + { + for ( ; ; ) + { + if (--num_probes_left == 0) return; + #define TDEFL_PROBE \ + next_probe_pos = d->m_next[probe_pos]; \ + if ((!next_probe_pos) || ((dist = (mz_uint16)(lookahead_pos - next_probe_pos)) > max_dist)) return; \ + probe_pos = next_probe_pos & TDEFL_LZ_DICT_SIZE_MASK; \ + if (TDEFL_READ_UNALIGNED_WORD(&d->m_dict[probe_pos + match_len - 1]) == c01) break; + TDEFL_PROBE; TDEFL_PROBE; TDEFL_PROBE; + } + if (!dist) break; q = (const mz_uint16*)(d->m_dict + probe_pos); if (TDEFL_READ_UNALIGNED_WORD(q) != s01) continue; p = s; probe_len = 32; + do { } while ( (TDEFL_READ_UNALIGNED_WORD(++p) == TDEFL_READ_UNALIGNED_WORD(++q)) && (TDEFL_READ_UNALIGNED_WORD(++p) == TDEFL_READ_UNALIGNED_WORD(++q)) && + (TDEFL_READ_UNALIGNED_WORD(++p) == TDEFL_READ_UNALIGNED_WORD(++q)) && (TDEFL_READ_UNALIGNED_WORD(++p) == TDEFL_READ_UNALIGNED_WORD(++q)) && (--probe_len > 0) ); + if (!probe_len) + { + *pMatch_dist = dist; *pMatch_len = MZ_MIN(max_match_len, TDEFL_MAX_MATCH_LEN); break; + } + else if ((probe_len = ((mz_uint)(p - s) * 2) + (mz_uint)(*(const mz_uint8*)p == *(const mz_uint8*)q)) > match_len) + { + *pMatch_dist = dist; if ((*pMatch_len = match_len = MZ_MIN(max_match_len, probe_len)) == max_match_len) break; + c01 = TDEFL_READ_UNALIGNED_WORD(&d->m_dict[pos + match_len - 1]); + } + } +} +#else +static MZ_FORCEINLINE void tdefl_find_match(tdefl_compressor *d, mz_uint lookahead_pos, mz_uint max_dist, mz_uint max_match_len, mz_uint *pMatch_dist, mz_uint *pMatch_len) +{ + mz_uint dist, pos = lookahead_pos & TDEFL_LZ_DICT_SIZE_MASK, match_len = *pMatch_len, probe_pos = pos, next_probe_pos, probe_len; + mz_uint num_probes_left = d->m_max_probes[match_len >= 32]; + const mz_uint8 *s = d->m_dict + pos, *p, *q; + mz_uint8 c0 = d->m_dict[pos + match_len], c1 = d->m_dict[pos + match_len - 1]; + MZ_ASSERT(max_match_len <= TDEFL_MAX_MATCH_LEN); if (max_match_len <= match_len) return; + for ( ; ; ) + { + for ( ; ; ) + { + if (--num_probes_left == 0) return; + #define TDEFL_PROBE \ + next_probe_pos = d->m_next[probe_pos]; \ + if ((!next_probe_pos) || ((dist = (mz_uint16)(lookahead_pos - next_probe_pos)) > max_dist)) return; \ + probe_pos = next_probe_pos & TDEFL_LZ_DICT_SIZE_MASK; \ + if ((d->m_dict[probe_pos + match_len] == c0) && (d->m_dict[probe_pos + match_len - 1] == c1)) break; + TDEFL_PROBE; TDEFL_PROBE; TDEFL_PROBE; + } + if (!dist) break; p = s; q = d->m_dict + probe_pos; for (probe_len = 0; probe_len < max_match_len; probe_len++) if (*p++ != *q++) break; + if (probe_len > match_len) + { + *pMatch_dist = dist; if ((*pMatch_len = match_len = probe_len) == max_match_len) return; + c0 = d->m_dict[pos + match_len]; c1 = d->m_dict[pos + match_len - 1]; + } + } +} +#endif // #if MINIZ_USE_UNALIGNED_LOADS_AND_STORES + +#if MINIZ_USE_UNALIGNED_LOADS_AND_STORES && MINIZ_LITTLE_ENDIAN +static mz_bool tdefl_compress_fast(tdefl_compressor *d) +{ + // Faster, minimally featured LZRW1-style match+parse loop with better register utilization. Intended for applications where raw throughput is valued more highly than ratio. + mz_uint lookahead_pos = d->m_lookahead_pos, lookahead_size = d->m_lookahead_size, dict_size = d->m_dict_size, total_lz_bytes = d->m_total_lz_bytes, num_flags_left = d->m_num_flags_left; + mz_uint8 *pLZ_code_buf = d->m_pLZ_code_buf, *pLZ_flags = d->m_pLZ_flags; + mz_uint cur_pos = lookahead_pos & TDEFL_LZ_DICT_SIZE_MASK; + + while ((d->m_src_buf_left) || ((d->m_flush) && (lookahead_size))) + { + const mz_uint TDEFL_COMP_FAST_LOOKAHEAD_SIZE = 4096; + mz_uint dst_pos = (lookahead_pos + lookahead_size) & TDEFL_LZ_DICT_SIZE_MASK; + mz_uint num_bytes_to_process = (mz_uint)MZ_MIN(d->m_src_buf_left, TDEFL_COMP_FAST_LOOKAHEAD_SIZE - lookahead_size); + d->m_src_buf_left -= num_bytes_to_process; + lookahead_size += num_bytes_to_process; + + while (num_bytes_to_process) + { + mz_uint32 n = MZ_MIN(TDEFL_LZ_DICT_SIZE - dst_pos, num_bytes_to_process); + memcpy(d->m_dict + dst_pos, d->m_pSrc, n); + if (dst_pos < (TDEFL_MAX_MATCH_LEN - 1)) + memcpy(d->m_dict + TDEFL_LZ_DICT_SIZE + dst_pos, d->m_pSrc, MZ_MIN(n, (TDEFL_MAX_MATCH_LEN - 1) - dst_pos)); + d->m_pSrc += n; + dst_pos = (dst_pos + n) & TDEFL_LZ_DICT_SIZE_MASK; + num_bytes_to_process -= n; + } + + dict_size = MZ_MIN(TDEFL_LZ_DICT_SIZE - lookahead_size, dict_size); + if ((!d->m_flush) && (lookahead_size < TDEFL_COMP_FAST_LOOKAHEAD_SIZE)) break; + + while (lookahead_size >= 4) + { + mz_uint cur_match_dist, cur_match_len = 1; + mz_uint8 *pCur_dict = d->m_dict + cur_pos; + mz_uint first_trigram = (*(const mz_uint32 *)pCur_dict) & 0xFFFFFF; + mz_uint hash = (first_trigram ^ (first_trigram >> (24 - (TDEFL_LZ_HASH_BITS - 8)))) & TDEFL_LEVEL1_HASH_SIZE_MASK; + mz_uint probe_pos = d->m_hash[hash]; + d->m_hash[hash] = (mz_uint16)lookahead_pos; + + if (((cur_match_dist = (mz_uint16)(lookahead_pos - probe_pos)) <= dict_size) && ((*(const mz_uint32 *)(d->m_dict + (probe_pos &= TDEFL_LZ_DICT_SIZE_MASK)) & 0xFFFFFF) == first_trigram)) + { + const mz_uint16 *p = (const mz_uint16 *)pCur_dict; + const mz_uint16 *q = (const mz_uint16 *)(d->m_dict + probe_pos); + mz_uint32 probe_len = 32; + do { } while ( (TDEFL_READ_UNALIGNED_WORD(++p) == TDEFL_READ_UNALIGNED_WORD(++q)) && (TDEFL_READ_UNALIGNED_WORD(++p) == TDEFL_READ_UNALIGNED_WORD(++q)) && + (TDEFL_READ_UNALIGNED_WORD(++p) == TDEFL_READ_UNALIGNED_WORD(++q)) && (TDEFL_READ_UNALIGNED_WORD(++p) == TDEFL_READ_UNALIGNED_WORD(++q)) && (--probe_len > 0) ); + cur_match_len = ((mz_uint)(p - (const mz_uint16 *)pCur_dict) * 2) + (mz_uint)(*(const mz_uint8 *)p == *(const mz_uint8 *)q); + if (!probe_len) + cur_match_len = cur_match_dist ? TDEFL_MAX_MATCH_LEN : 0; + + if ((cur_match_len < TDEFL_MIN_MATCH_LEN) || ((cur_match_len == TDEFL_MIN_MATCH_LEN) && (cur_match_dist >= 8U*1024U))) + { + cur_match_len = 1; + *pLZ_code_buf++ = (mz_uint8)first_trigram; + *pLZ_flags = (mz_uint8)(*pLZ_flags >> 1); + d->m_huff_count[0][(mz_uint8)first_trigram]++; + } + else + { + mz_uint32 s0, s1; + cur_match_len = MZ_MIN(cur_match_len, lookahead_size); + + MZ_ASSERT((cur_match_len >= TDEFL_MIN_MATCH_LEN) && (cur_match_dist >= 1) && (cur_match_dist <= TDEFL_LZ_DICT_SIZE)); + + cur_match_dist--; + + pLZ_code_buf[0] = (mz_uint8)(cur_match_len - TDEFL_MIN_MATCH_LEN); + *(mz_uint16 *)(&pLZ_code_buf[1]) = (mz_uint16)cur_match_dist; + pLZ_code_buf += 3; + *pLZ_flags = (mz_uint8)((*pLZ_flags >> 1) | 0x80); + + s0 = s_tdefl_small_dist_sym[cur_match_dist & 511]; + s1 = s_tdefl_large_dist_sym[cur_match_dist >> 8]; + d->m_huff_count[1][(cur_match_dist < 512) ? s0 : s1]++; + + d->m_huff_count[0][s_tdefl_len_sym[cur_match_len - TDEFL_MIN_MATCH_LEN]]++; + } + } + else + { + *pLZ_code_buf++ = (mz_uint8)first_trigram; + *pLZ_flags = (mz_uint8)(*pLZ_flags >> 1); + d->m_huff_count[0][(mz_uint8)first_trigram]++; + } + + if (--num_flags_left == 0) { num_flags_left = 8; pLZ_flags = pLZ_code_buf++; } + + total_lz_bytes += cur_match_len; + lookahead_pos += cur_match_len; + dict_size = MZ_MIN(dict_size + cur_match_len, TDEFL_LZ_DICT_SIZE); + cur_pos = (cur_pos + cur_match_len) & TDEFL_LZ_DICT_SIZE_MASK; + MZ_ASSERT(lookahead_size >= cur_match_len); + lookahead_size -= cur_match_len; + + if (pLZ_code_buf > &d->m_lz_code_buf[TDEFL_LZ_CODE_BUF_SIZE - 8]) + { + int n; + d->m_lookahead_pos = lookahead_pos; d->m_lookahead_size = lookahead_size; d->m_dict_size = dict_size; + d->m_total_lz_bytes = total_lz_bytes; d->m_pLZ_code_buf = pLZ_code_buf; d->m_pLZ_flags = pLZ_flags; d->m_num_flags_left = num_flags_left; + if ((n = tdefl_flush_block(d, 0)) != 0) + return (n < 0) ? MZ_FALSE : MZ_TRUE; + total_lz_bytes = d->m_total_lz_bytes; pLZ_code_buf = d->m_pLZ_code_buf; pLZ_flags = d->m_pLZ_flags; num_flags_left = d->m_num_flags_left; + } + } + + while (lookahead_size) + { + mz_uint8 lit = d->m_dict[cur_pos]; + + total_lz_bytes++; + *pLZ_code_buf++ = lit; + *pLZ_flags = (mz_uint8)(*pLZ_flags >> 1); + if (--num_flags_left == 0) { num_flags_left = 8; pLZ_flags = pLZ_code_buf++; } + + d->m_huff_count[0][lit]++; + + lookahead_pos++; + dict_size = MZ_MIN(dict_size + 1, TDEFL_LZ_DICT_SIZE); + cur_pos = (cur_pos + 1) & TDEFL_LZ_DICT_SIZE_MASK; + lookahead_size--; + + if (pLZ_code_buf > &d->m_lz_code_buf[TDEFL_LZ_CODE_BUF_SIZE - 8]) + { + int n; + d->m_lookahead_pos = lookahead_pos; d->m_lookahead_size = lookahead_size; d->m_dict_size = dict_size; + d->m_total_lz_bytes = total_lz_bytes; d->m_pLZ_code_buf = pLZ_code_buf; d->m_pLZ_flags = pLZ_flags; d->m_num_flags_left = num_flags_left; + if ((n = tdefl_flush_block(d, 0)) != 0) + return (n < 0) ? MZ_FALSE : MZ_TRUE; + total_lz_bytes = d->m_total_lz_bytes; pLZ_code_buf = d->m_pLZ_code_buf; pLZ_flags = d->m_pLZ_flags; num_flags_left = d->m_num_flags_left; + } + } + } + + d->m_lookahead_pos = lookahead_pos; d->m_lookahead_size = lookahead_size; d->m_dict_size = dict_size; + d->m_total_lz_bytes = total_lz_bytes; d->m_pLZ_code_buf = pLZ_code_buf; d->m_pLZ_flags = pLZ_flags; d->m_num_flags_left = num_flags_left; + return MZ_TRUE; +} +#endif // MINIZ_USE_UNALIGNED_LOADS_AND_STORES && MINIZ_LITTLE_ENDIAN + +static MZ_FORCEINLINE void tdefl_record_literal(tdefl_compressor *d, mz_uint8 lit) +{ + d->m_total_lz_bytes++; + *d->m_pLZ_code_buf++ = lit; + *d->m_pLZ_flags = (mz_uint8)(*d->m_pLZ_flags >> 1); if (--d->m_num_flags_left == 0) { d->m_num_flags_left = 8; d->m_pLZ_flags = d->m_pLZ_code_buf++; } + d->m_huff_count[0][lit]++; +} + +static MZ_FORCEINLINE void tdefl_record_match(tdefl_compressor *d, mz_uint match_len, mz_uint match_dist) +{ + mz_uint32 s0, s1; + + MZ_ASSERT((match_len >= TDEFL_MIN_MATCH_LEN) && (match_dist >= 1) && (match_dist <= TDEFL_LZ_DICT_SIZE)); + + d->m_total_lz_bytes += match_len; + + d->m_pLZ_code_buf[0] = (mz_uint8)(match_len - TDEFL_MIN_MATCH_LEN); + + match_dist -= 1; + d->m_pLZ_code_buf[1] = (mz_uint8)(match_dist & 0xFF); + d->m_pLZ_code_buf[2] = (mz_uint8)(match_dist >> 8); d->m_pLZ_code_buf += 3; + + *d->m_pLZ_flags = (mz_uint8)((*d->m_pLZ_flags >> 1) | 0x80); if (--d->m_num_flags_left == 0) { d->m_num_flags_left = 8; d->m_pLZ_flags = d->m_pLZ_code_buf++; } + + s0 = s_tdefl_small_dist_sym[match_dist & 511]; s1 = s_tdefl_large_dist_sym[(match_dist >> 8) & 127]; + d->m_huff_count[1][(match_dist < 512) ? s0 : s1]++; + + if (match_len >= TDEFL_MIN_MATCH_LEN) d->m_huff_count[0][s_tdefl_len_sym[match_len - TDEFL_MIN_MATCH_LEN]]++; +} + +static mz_bool tdefl_compress_normal(tdefl_compressor *d) +{ + const mz_uint8 *pSrc = d->m_pSrc; size_t src_buf_left = d->m_src_buf_left; + tdefl_flush flush = d->m_flush; + + while ((src_buf_left) || ((flush) && (d->m_lookahead_size))) + { + mz_uint len_to_move, cur_match_dist, cur_match_len, cur_pos; + // Update dictionary and hash chains. Keeps the lookahead size equal to TDEFL_MAX_MATCH_LEN. + if ((d->m_lookahead_size + d->m_dict_size) >= (TDEFL_MIN_MATCH_LEN - 1)) + { + mz_uint dst_pos = (d->m_lookahead_pos + d->m_lookahead_size) & TDEFL_LZ_DICT_SIZE_MASK, ins_pos = d->m_lookahead_pos + d->m_lookahead_size - 2; + mz_uint hash = (d->m_dict[ins_pos & TDEFL_LZ_DICT_SIZE_MASK] << TDEFL_LZ_HASH_SHIFT) ^ d->m_dict[(ins_pos + 1) & TDEFL_LZ_DICT_SIZE_MASK]; + mz_uint num_bytes_to_process = (mz_uint)MZ_MIN(src_buf_left, TDEFL_MAX_MATCH_LEN - d->m_lookahead_size); + const mz_uint8 *pSrc_end = pSrc + num_bytes_to_process; + src_buf_left -= num_bytes_to_process; + d->m_lookahead_size += num_bytes_to_process; + while (pSrc != pSrc_end) + { + mz_uint8 c = *pSrc++; d->m_dict[dst_pos] = c; if (dst_pos < (TDEFL_MAX_MATCH_LEN - 1)) d->m_dict[TDEFL_LZ_DICT_SIZE + dst_pos] = c; + hash = ((hash << TDEFL_LZ_HASH_SHIFT) ^ c) & (TDEFL_LZ_HASH_SIZE - 1); + d->m_next[ins_pos & TDEFL_LZ_DICT_SIZE_MASK] = d->m_hash[hash]; d->m_hash[hash] = (mz_uint16)(ins_pos); + dst_pos = (dst_pos + 1) & TDEFL_LZ_DICT_SIZE_MASK; ins_pos++; + } + } + else + { + while ((src_buf_left) && (d->m_lookahead_size < TDEFL_MAX_MATCH_LEN)) + { + mz_uint8 c = *pSrc++; + mz_uint dst_pos = (d->m_lookahead_pos + d->m_lookahead_size) & TDEFL_LZ_DICT_SIZE_MASK; + src_buf_left--; + d->m_dict[dst_pos] = c; + if (dst_pos < (TDEFL_MAX_MATCH_LEN - 1)) + d->m_dict[TDEFL_LZ_DICT_SIZE + dst_pos] = c; + if ((++d->m_lookahead_size + d->m_dict_size) >= TDEFL_MIN_MATCH_LEN) + { + mz_uint ins_pos = d->m_lookahead_pos + (d->m_lookahead_size - 1) - 2; + mz_uint hash = ((d->m_dict[ins_pos & TDEFL_LZ_DICT_SIZE_MASK] << (TDEFL_LZ_HASH_SHIFT * 2)) ^ (d->m_dict[(ins_pos + 1) & TDEFL_LZ_DICT_SIZE_MASK] << TDEFL_LZ_HASH_SHIFT) ^ c) & (TDEFL_LZ_HASH_SIZE - 1); + d->m_next[ins_pos & TDEFL_LZ_DICT_SIZE_MASK] = d->m_hash[hash]; d->m_hash[hash] = (mz_uint16)(ins_pos); + } + } + } + d->m_dict_size = MZ_MIN(TDEFL_LZ_DICT_SIZE - d->m_lookahead_size, d->m_dict_size); + if ((!flush) && (d->m_lookahead_size < TDEFL_MAX_MATCH_LEN)) + break; + + // Simple lazy/greedy parsing state machine. + len_to_move = 1; cur_match_dist = 0; cur_match_len = d->m_saved_match_len ? d->m_saved_match_len : (TDEFL_MIN_MATCH_LEN - 1); cur_pos = d->m_lookahead_pos & TDEFL_LZ_DICT_SIZE_MASK; + if (d->m_flags & (TDEFL_RLE_MATCHES | TDEFL_FORCE_ALL_RAW_BLOCKS)) + { + if ((d->m_dict_size) && (!(d->m_flags & TDEFL_FORCE_ALL_RAW_BLOCKS))) + { + mz_uint8 c = d->m_dict[(cur_pos - 1) & TDEFL_LZ_DICT_SIZE_MASK]; + cur_match_len = 0; while (cur_match_len < d->m_lookahead_size) { if (d->m_dict[cur_pos + cur_match_len] != c) break; cur_match_len++; } + if (cur_match_len < TDEFL_MIN_MATCH_LEN) cur_match_len = 0; else cur_match_dist = 1; + } + } + else + { + tdefl_find_match(d, d->m_lookahead_pos, d->m_dict_size, d->m_lookahead_size, &cur_match_dist, &cur_match_len); + } + if (((cur_match_len == TDEFL_MIN_MATCH_LEN) && (cur_match_dist >= 8U*1024U)) || (cur_pos == cur_match_dist) || ((d->m_flags & TDEFL_FILTER_MATCHES) && (cur_match_len <= 5))) + { + cur_match_dist = cur_match_len = 0; + } + if (d->m_saved_match_len) + { + if (cur_match_len > d->m_saved_match_len) + { + tdefl_record_literal(d, (mz_uint8)d->m_saved_lit); + if (cur_match_len >= 128) + { + tdefl_record_match(d, cur_match_len, cur_match_dist); + d->m_saved_match_len = 0; len_to_move = cur_match_len; + } + else + { + d->m_saved_lit = d->m_dict[cur_pos]; d->m_saved_match_dist = cur_match_dist; d->m_saved_match_len = cur_match_len; + } + } + else + { + tdefl_record_match(d, d->m_saved_match_len, d->m_saved_match_dist); + len_to_move = d->m_saved_match_len - 1; d->m_saved_match_len = 0; + } + } + else if (!cur_match_dist) + tdefl_record_literal(d, d->m_dict[MZ_MIN(cur_pos, sizeof(d->m_dict) - 1)]); + else if ((d->m_greedy_parsing) || (d->m_flags & TDEFL_RLE_MATCHES) || (cur_match_len >= 128)) + { + tdefl_record_match(d, cur_match_len, cur_match_dist); + len_to_move = cur_match_len; + } + else + { + d->m_saved_lit = d->m_dict[MZ_MIN(cur_pos, sizeof(d->m_dict) - 1)]; d->m_saved_match_dist = cur_match_dist; d->m_saved_match_len = cur_match_len; + } + // Move the lookahead forward by len_to_move bytes. + d->m_lookahead_pos += len_to_move; + MZ_ASSERT(d->m_lookahead_size >= len_to_move); + d->m_lookahead_size -= len_to_move; + d->m_dict_size = MZ_MIN(d->m_dict_size + len_to_move, TDEFL_LZ_DICT_SIZE); + // Check if it's time to flush the current LZ codes to the internal output buffer. + if ( (d->m_pLZ_code_buf > &d->m_lz_code_buf[TDEFL_LZ_CODE_BUF_SIZE - 8]) || + ( (d->m_total_lz_bytes > 31*1024) && (((((mz_uint)(d->m_pLZ_code_buf - d->m_lz_code_buf) * 115) >> 7) >= d->m_total_lz_bytes) || (d->m_flags & TDEFL_FORCE_ALL_RAW_BLOCKS))) ) + { + int n; + d->m_pSrc = pSrc; d->m_src_buf_left = src_buf_left; + if ((n = tdefl_flush_block(d, 0)) != 0) + return (n < 0) ? MZ_FALSE : MZ_TRUE; + } + } + + d->m_pSrc = pSrc; d->m_src_buf_left = src_buf_left; + return MZ_TRUE; +} + +static tdefl_status tdefl_flush_output_buffer(tdefl_compressor *d) +{ + if (d->m_pIn_buf_size) + { + *d->m_pIn_buf_size = d->m_pSrc - (const mz_uint8 *)d->m_pIn_buf; + } + + if (d->m_pOut_buf_size) + { + size_t n = MZ_MIN(*d->m_pOut_buf_size - d->m_out_buf_ofs, d->m_output_flush_remaining); + memcpy((mz_uint8 *)d->m_pOut_buf + d->m_out_buf_ofs, d->m_output_buf + d->m_output_flush_ofs, n); + d->m_output_flush_ofs += (mz_uint)n; + d->m_output_flush_remaining -= (mz_uint)n; + d->m_out_buf_ofs += n; + + *d->m_pOut_buf_size = d->m_out_buf_ofs; + } + + return (d->m_finished && !d->m_output_flush_remaining) ? TDEFL_STATUS_DONE : TDEFL_STATUS_OKAY; +} + +tdefl_status tdefl_compress(tdefl_compressor *d, const void *pIn_buf, size_t *pIn_buf_size, void *pOut_buf, size_t *pOut_buf_size, tdefl_flush flush) +{ + if (!d) + { + if (pIn_buf_size) *pIn_buf_size = 0; + if (pOut_buf_size) *pOut_buf_size = 0; + return TDEFL_STATUS_BAD_PARAM; + } + + d->m_pIn_buf = pIn_buf; d->m_pIn_buf_size = pIn_buf_size; + d->m_pOut_buf = pOut_buf; d->m_pOut_buf_size = pOut_buf_size; + d->m_pSrc = (const mz_uint8 *)(pIn_buf); d->m_src_buf_left = pIn_buf_size ? *pIn_buf_size : 0; + d->m_out_buf_ofs = 0; + d->m_flush = flush; + + if ( ((d->m_pPut_buf_func != NULL) == ((pOut_buf != NULL) || (pOut_buf_size != NULL))) || (d->m_prev_return_status != TDEFL_STATUS_OKAY) || + (d->m_wants_to_finish && (flush != TDEFL_FINISH)) || (pIn_buf_size && *pIn_buf_size && !pIn_buf) || (pOut_buf_size && *pOut_buf_size && !pOut_buf) ) + { + if (pIn_buf_size) *pIn_buf_size = 0; + if (pOut_buf_size) *pOut_buf_size = 0; + return (d->m_prev_return_status = TDEFL_STATUS_BAD_PARAM); + } + d->m_wants_to_finish |= (flush == TDEFL_FINISH); + + if ((d->m_output_flush_remaining) || (d->m_finished)) + return (d->m_prev_return_status = tdefl_flush_output_buffer(d)); + +#if MINIZ_USE_UNALIGNED_LOADS_AND_STORES && MINIZ_LITTLE_ENDIAN + if (((d->m_flags & TDEFL_MAX_PROBES_MASK) == 1) && + ((d->m_flags & TDEFL_GREEDY_PARSING_FLAG) != 0) && + ((d->m_flags & (TDEFL_FILTER_MATCHES | TDEFL_FORCE_ALL_RAW_BLOCKS | TDEFL_RLE_MATCHES)) == 0)) + { + if (!tdefl_compress_fast(d)) + return d->m_prev_return_status; + } + else +#endif // #if MINIZ_USE_UNALIGNED_LOADS_AND_STORES && MINIZ_LITTLE_ENDIAN + { + if (!tdefl_compress_normal(d)) + return d->m_prev_return_status; + } + + if ((d->m_flags & (TDEFL_WRITE_ZLIB_HEADER | TDEFL_COMPUTE_ADLER32)) && (pIn_buf)) + d->m_adler32 = (mz_uint32)mz_adler32(d->m_adler32, (const mz_uint8 *)pIn_buf, d->m_pSrc - (const mz_uint8 *)pIn_buf); + + if ((flush) && (!d->m_lookahead_size) && (!d->m_src_buf_left) && (!d->m_output_flush_remaining)) + { + if (tdefl_flush_block(d, flush) < 0) + return d->m_prev_return_status; + d->m_finished = (flush == TDEFL_FINISH); + if (flush == TDEFL_FULL_FLUSH) { MZ_CLEAR_OBJ(d->m_hash); MZ_CLEAR_OBJ(d->m_next); d->m_dict_size = 0; } + } + + return (d->m_prev_return_status = tdefl_flush_output_buffer(d)); +} + +tdefl_status tdefl_compress_buffer(tdefl_compressor *d, const void *pIn_buf, size_t in_buf_size, tdefl_flush flush) +{ + MZ_ASSERT(d->m_pPut_buf_func); return tdefl_compress(d, pIn_buf, &in_buf_size, NULL, NULL, flush); +} + +tdefl_status tdefl_init(tdefl_compressor *d, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags) +{ + d->m_pPut_buf_func = pPut_buf_func; d->m_pPut_buf_user = pPut_buf_user; + d->m_flags = (mz_uint)(flags); d->m_max_probes[0] = 1 + ((flags & 0xFFF) + 2) / 3; d->m_greedy_parsing = (flags & TDEFL_GREEDY_PARSING_FLAG) != 0; + d->m_max_probes[1] = 1 + (((flags & 0xFFF) >> 2) + 2) / 3; + if (!(flags & TDEFL_NONDETERMINISTIC_PARSING_FLAG)) MZ_CLEAR_OBJ(d->m_hash); + d->m_lookahead_pos = d->m_lookahead_size = d->m_dict_size = d->m_total_lz_bytes = d->m_lz_code_buf_dict_pos = d->m_bits_in = 0; + d->m_output_flush_ofs = d->m_output_flush_remaining = d->m_finished = d->m_block_index = d->m_bit_buffer = d->m_wants_to_finish = 0; + d->m_pLZ_code_buf = d->m_lz_code_buf + 1; d->m_pLZ_flags = d->m_lz_code_buf; d->m_num_flags_left = 8; + d->m_pOutput_buf = d->m_output_buf; d->m_pOutput_buf_end = d->m_output_buf; d->m_prev_return_status = TDEFL_STATUS_OKAY; + d->m_saved_match_dist = d->m_saved_match_len = d->m_saved_lit = 0; d->m_adler32 = 1; + d->m_pIn_buf = NULL; d->m_pOut_buf = NULL; + d->m_pIn_buf_size = NULL; d->m_pOut_buf_size = NULL; + d->m_flush = TDEFL_NO_FLUSH; d->m_pSrc = NULL; d->m_src_buf_left = 0; d->m_out_buf_ofs = 0; + memset(&d->m_huff_count[0][0], 0, sizeof(d->m_huff_count[0][0]) * TDEFL_MAX_HUFF_SYMBOLS_0); + memset(&d->m_huff_count[1][0], 0, sizeof(d->m_huff_count[1][0]) * TDEFL_MAX_HUFF_SYMBOLS_1); + return TDEFL_STATUS_OKAY; +} + +tdefl_status tdefl_get_prev_return_status(tdefl_compressor *d) +{ + return d->m_prev_return_status; +} + +mz_uint32 tdefl_get_adler32(tdefl_compressor *d) +{ + return d->m_adler32; +} + +mz_bool tdefl_compress_mem_to_output(const void *pBuf, size_t buf_len, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags) +{ + tdefl_compressor *pComp; mz_bool succeeded; if (((buf_len) && (!pBuf)) || (!pPut_buf_func)) return MZ_FALSE; + pComp = (tdefl_compressor*)MZ_MALLOC(sizeof(tdefl_compressor)); if (!pComp) return MZ_FALSE; + succeeded = (tdefl_init(pComp, pPut_buf_func, pPut_buf_user, flags) == TDEFL_STATUS_OKAY); + succeeded = succeeded && (tdefl_compress_buffer(pComp, pBuf, buf_len, TDEFL_FINISH) == TDEFL_STATUS_DONE); + MZ_FREE(pComp); return succeeded; +} + +typedef struct +{ + size_t m_size, m_capacity; + mz_uint8 *m_pBuf; + mz_bool m_expandable; +} tdefl_output_buffer; + +static mz_bool tdefl_output_buffer_putter(const void *pBuf, int len, void *pUser) +{ + tdefl_output_buffer *p = (tdefl_output_buffer *)pUser; + size_t new_size = p->m_size + len; + if (new_size > p->m_capacity) + { + size_t new_capacity = p->m_capacity; mz_uint8 *pNew_buf; if (!p->m_expandable) return MZ_FALSE; + do { new_capacity = MZ_MAX(128U, new_capacity << 1U); } while (new_size > new_capacity); + pNew_buf = (mz_uint8*)MZ_REALLOC(p->m_pBuf, new_capacity); if (!pNew_buf) return MZ_FALSE; + p->m_pBuf = pNew_buf; p->m_capacity = new_capacity; + } + memcpy((mz_uint8*)p->m_pBuf + p->m_size, pBuf, len); p->m_size = new_size; + return MZ_TRUE; +} + +void *tdefl_compress_mem_to_heap(const void *pSrc_buf, size_t src_buf_len, size_t *pOut_len, int flags) +{ + tdefl_output_buffer out_buf; MZ_CLEAR_OBJ(out_buf); + if (!pOut_len) return MZ_FALSE; else *pOut_len = 0; + out_buf.m_expandable = MZ_TRUE; + if (!tdefl_compress_mem_to_output(pSrc_buf, src_buf_len, tdefl_output_buffer_putter, &out_buf, flags)) return NULL; + *pOut_len = out_buf.m_size; return out_buf.m_pBuf; +} + +size_t tdefl_compress_mem_to_mem(void *pOut_buf, size_t out_buf_len, const void *pSrc_buf, size_t src_buf_len, int flags) +{ + tdefl_output_buffer out_buf; MZ_CLEAR_OBJ(out_buf); + if (!pOut_buf) return 0; + out_buf.m_pBuf = (mz_uint8*)pOut_buf; out_buf.m_capacity = out_buf_len; + if (!tdefl_compress_mem_to_output(pSrc_buf, src_buf_len, tdefl_output_buffer_putter, &out_buf, flags)) return 0; + return out_buf.m_size; +} + +#ifndef MINIZ_NO_ZLIB_APIS +static const mz_uint s_tdefl_num_probes[11] = { 0, 1, 6, 32, 16, 32, 128, 256, 512, 768, 1500 }; + +// level may actually range from [0,10] (10 is a "hidden" max level, where we want a bit more compression and it's fine if throughput to fall off a cliff on some files). +mz_uint tdefl_create_comp_flags_from_zip_params(int level, int window_bits, int strategy) +{ + mz_uint comp_flags = s_tdefl_num_probes[(level >= 0) ? MZ_MIN(10, level) : MZ_DEFAULT_LEVEL] | ((level <= 3) ? TDEFL_GREEDY_PARSING_FLAG : 0); + if (window_bits > 0) comp_flags |= TDEFL_WRITE_ZLIB_HEADER; + + if (!level) comp_flags |= TDEFL_FORCE_ALL_RAW_BLOCKS; + else if (strategy == MZ_FILTERED) comp_flags |= TDEFL_FILTER_MATCHES; + else if (strategy == MZ_HUFFMAN_ONLY) comp_flags &= ~TDEFL_MAX_PROBES_MASK; + else if (strategy == MZ_FIXED) comp_flags |= TDEFL_FORCE_ALL_STATIC_BLOCKS; + else if (strategy == MZ_RLE) comp_flags |= TDEFL_RLE_MATCHES; + + return comp_flags; +} +#endif //MINIZ_NO_ZLIB_APIS + +#ifdef _MSC_VER +#pragma warning (push) +#pragma warning (disable:4204) // nonstandard extension used : non-constant aggregate initializer (also supported by GNU C and C99, so no big deal) +#endif + +// Simple PNG writer function by Alex Evans, 2011. Released into the public domain: https://gist.github.com/908299, more context at +// http://altdevblogaday.org/2011/04/06/a-smaller-jpg-encoder/. +void *tdefl_write_image_to_png_file_in_memory(const void *pImage, int w, int h, int bpl, int num_chans, size_t *pLen_out) +{ + tdefl_compressor *pComp = (tdefl_compressor *)MZ_MALLOC(sizeof(tdefl_compressor)); tdefl_output_buffer out_buf; int i, y, z; mz_uint32 c; *pLen_out = 0; + if (!pComp) return NULL; + MZ_CLEAR_OBJ(out_buf); out_buf.m_expandable = MZ_TRUE; out_buf.m_capacity = 57+MZ_MAX(64, (1+bpl)*h); if (NULL == (out_buf.m_pBuf = (mz_uint8*)MZ_MALLOC(out_buf.m_capacity))) { MZ_FREE(pComp); return NULL; } + // write dummy header + for (z = 41; z; --z) tdefl_output_buffer_putter(&z, 1, &out_buf); + // compress image data + tdefl_init(pComp, tdefl_output_buffer_putter, &out_buf, TDEFL_DEFAULT_MAX_PROBES | TDEFL_WRITE_ZLIB_HEADER); + for (y = 0; y < h; ++y) { tdefl_compress_buffer(pComp, &z, 1, TDEFL_NO_FLUSH); tdefl_compress_buffer(pComp, (mz_uint8*)pImage + y * bpl, bpl, TDEFL_NO_FLUSH); } + if (tdefl_compress_buffer(pComp, NULL, 0, TDEFL_FINISH) != TDEFL_STATUS_DONE) { MZ_FREE(pComp); MZ_FREE(out_buf.m_pBuf); return NULL; } + // write real header + *pLen_out = out_buf.m_size-41; + { + mz_uint8 pnghdr[41]={0x89,0x50,0x4e,0x47,0x0d,0x0a,0x1a,0x0a,0x00,0x00,0x00,0x0d,0x49,0x48,0x44,0x52, + 0,0,(mz_uint8)(w>>8),(mz_uint8)w,0,0,(mz_uint8)(h>>8),(mz_uint8)h,8,"\0\0\04\02\06"[num_chans],0,0,0,0,0,0,0, + (mz_uint8)(*pLen_out>>24),(mz_uint8)(*pLen_out>>16),(mz_uint8)(*pLen_out>>8),(mz_uint8)*pLen_out,0x49,0x44,0x41,0x54}; + c=(mz_uint32)mz_crc32(MZ_CRC32_INIT,pnghdr+12,17); for (i=0; i<4; ++i, c<<=8) ((mz_uint8*)(pnghdr+29))[i]=(mz_uint8)(c>>24); + memcpy(out_buf.m_pBuf, pnghdr, 41); + } + // write footer (IDAT CRC-32, followed by IEND chunk) + if (!tdefl_output_buffer_putter("\0\0\0\0\0\0\0\0\x49\x45\x4e\x44\xae\x42\x60\x82", 16, &out_buf)) { *pLen_out = 0; MZ_FREE(pComp); MZ_FREE(out_buf.m_pBuf); return NULL; } + c = (mz_uint32)mz_crc32(MZ_CRC32_INIT,out_buf.m_pBuf+41-4, *pLen_out+4); for (i=0; i<4; ++i, c<<=8) (out_buf.m_pBuf+out_buf.m_size-16)[i] = (mz_uint8)(c >> 24); + // compute final size of file, grab compressed data buffer and return + *pLen_out += 57; MZ_FREE(pComp); return out_buf.m_pBuf; +} + +#ifdef _MSC_VER +#pragma warning (pop) +#endif + +// ------------------- .ZIP archive reading + +#ifndef MINIZ_NO_ARCHIVE_APIS + +#ifdef MINIZ_NO_STDIO + #define MZ_FILE void * +#else + #include + #include + #if defined(_MSC_VER) || defined(__MINGW64__) + #include + #define MZ_FILE FILE + #define MZ_FOPEN fopen + #define MZ_FCLOSE fclose + #define MZ_FREAD fread + #define MZ_FWRITE fwrite + #define MZ_FTELL64 _ftelli64 + #define MZ_FSEEK64 _fseeki64 + #define MZ_FILE_STAT_STRUCT _stat + #define MZ_FILE_STAT _stat + #define MZ_FFLUSH fflush + #define MZ_FREOPEN freopen + #define MZ_DELETE_FILE remove + #elif defined(__MINGW32__) + #include + #define MZ_FILE FILE + #define MZ_FOPEN fopen + #define MZ_FCLOSE fclose + #define MZ_FREAD fread + #define MZ_FWRITE fwrite + #define MZ_FTELL64 ftello64 + #define MZ_FSEEK64 fseeko64 + #define MZ_FILE_STAT_STRUCT _stat + #define MZ_FILE_STAT _stat + #define MZ_FFLUSH fflush + #define MZ_FREOPEN freopen + #define MZ_DELETE_FILE remove + #else + #include + #define MZ_FILE FILE + #define MZ_FOPEN fopen + #define MZ_FCLOSE fclose + #define MZ_FREAD fread + #define MZ_FWRITE fwrite + #define MZ_FTELL64 ftello + #define MZ_FSEEK64 fseeko + #define MZ_FILE_STAT_STRUCT stat + #define MZ_FILE_STAT stat + #define MZ_FFLUSH fflush + #define MZ_FREOPEN freopen + #define MZ_DELETE_FILE remove + #endif // #ifdef _MSC_VER +#endif // #ifdef MINIZ_NO_STDIO + +#define MZ_TOLOWER(c) ((((c) >= 'A') && ((c) <= 'Z')) ? ((c) - 'A' + 'a') : (c)) + +// Various ZIP archive enums. To completely avoid cross platform compiler alignment and platform endian issues, miniz.c doesn't use structs for any of this stuff. +enum +{ + // ZIP archive identifiers and record sizes + MZ_ZIP_END_OF_CENTRAL_DIR_HEADER_SIG = 0x06054b50, MZ_ZIP_CENTRAL_DIR_HEADER_SIG = 0x02014b50, MZ_ZIP_LOCAL_DIR_HEADER_SIG = 0x04034b50, + MZ_ZIP_LOCAL_DIR_HEADER_SIZE = 30, MZ_ZIP_CENTRAL_DIR_HEADER_SIZE = 46, MZ_ZIP_END_OF_CENTRAL_DIR_HEADER_SIZE = 22, + // Central directory header record offsets + MZ_ZIP_CDH_SIG_OFS = 0, MZ_ZIP_CDH_VERSION_MADE_BY_OFS = 4, MZ_ZIP_CDH_VERSION_NEEDED_OFS = 6, MZ_ZIP_CDH_BIT_FLAG_OFS = 8, + MZ_ZIP_CDH_METHOD_OFS = 10, MZ_ZIP_CDH_FILE_TIME_OFS = 12, MZ_ZIP_CDH_FILE_DATE_OFS = 14, MZ_ZIP_CDH_CRC32_OFS = 16, + MZ_ZIP_CDH_COMPRESSED_SIZE_OFS = 20, MZ_ZIP_CDH_DECOMPRESSED_SIZE_OFS = 24, MZ_ZIP_CDH_FILENAME_LEN_OFS = 28, MZ_ZIP_CDH_EXTRA_LEN_OFS = 30, + MZ_ZIP_CDH_COMMENT_LEN_OFS = 32, MZ_ZIP_CDH_DISK_START_OFS = 34, MZ_ZIP_CDH_INTERNAL_ATTR_OFS = 36, MZ_ZIP_CDH_EXTERNAL_ATTR_OFS = 38, MZ_ZIP_CDH_LOCAL_HEADER_OFS = 42, + // Local directory header offsets + MZ_ZIP_LDH_SIG_OFS = 0, MZ_ZIP_LDH_VERSION_NEEDED_OFS = 4, MZ_ZIP_LDH_BIT_FLAG_OFS = 6, MZ_ZIP_LDH_METHOD_OFS = 8, MZ_ZIP_LDH_FILE_TIME_OFS = 10, + MZ_ZIP_LDH_FILE_DATE_OFS = 12, MZ_ZIP_LDH_CRC32_OFS = 14, MZ_ZIP_LDH_COMPRESSED_SIZE_OFS = 18, MZ_ZIP_LDH_DECOMPRESSED_SIZE_OFS = 22, + MZ_ZIP_LDH_FILENAME_LEN_OFS = 26, MZ_ZIP_LDH_EXTRA_LEN_OFS = 28, + // End of central directory offsets + MZ_ZIP_ECDH_SIG_OFS = 0, MZ_ZIP_ECDH_NUM_THIS_DISK_OFS = 4, MZ_ZIP_ECDH_NUM_DISK_CDIR_OFS = 6, MZ_ZIP_ECDH_CDIR_NUM_ENTRIES_ON_DISK_OFS = 8, + MZ_ZIP_ECDH_CDIR_TOTAL_ENTRIES_OFS = 10, MZ_ZIP_ECDH_CDIR_SIZE_OFS = 12, MZ_ZIP_ECDH_CDIR_OFS_OFS = 16, MZ_ZIP_ECDH_COMMENT_SIZE_OFS = 20, +}; + +typedef struct +{ + void *m_p; + size_t m_size, m_capacity; + mz_uint m_element_size; +} mz_zip_array; + +struct mz_zip_internal_state_tag +{ + mz_zip_array m_central_dir; + mz_zip_array m_central_dir_offsets; + mz_zip_array m_sorted_central_dir_offsets; + MZ_FILE *m_pFile; + void *m_pMem; + size_t m_mem_size; + size_t m_mem_capacity; +}; + +#define MZ_ZIP_ARRAY_SET_ELEMENT_SIZE(array_ptr, element_size) (array_ptr)->m_element_size = element_size +#define MZ_ZIP_ARRAY_ELEMENT(array_ptr, element_type, index) ((element_type *)((array_ptr)->m_p))[index] + +static MZ_FORCEINLINE void mz_zip_array_clear(mz_zip_archive *pZip, mz_zip_array *pArray) +{ + pZip->m_pFree(pZip->m_pAlloc_opaque, pArray->m_p); + memset(pArray, 0, sizeof(mz_zip_array)); +} + +static mz_bool mz_zip_array_ensure_capacity(mz_zip_archive *pZip, mz_zip_array *pArray, size_t min_new_capacity, mz_uint growing) +{ + void *pNew_p; size_t new_capacity = min_new_capacity; MZ_ASSERT(pArray->m_element_size); if (pArray->m_capacity >= min_new_capacity) return MZ_TRUE; + if (growing) { new_capacity = MZ_MAX(1, pArray->m_capacity); while (new_capacity < min_new_capacity) new_capacity *= 2; } + if (NULL == (pNew_p = pZip->m_pRealloc(pZip->m_pAlloc_opaque, pArray->m_p, pArray->m_element_size, new_capacity))) return MZ_FALSE; + pArray->m_p = pNew_p; pArray->m_capacity = new_capacity; + return MZ_TRUE; +} + +static MZ_FORCEINLINE mz_bool mz_zip_array_reserve(mz_zip_archive *pZip, mz_zip_array *pArray, size_t new_capacity, mz_uint growing) +{ + if (new_capacity > pArray->m_capacity) { if (!mz_zip_array_ensure_capacity(pZip, pArray, new_capacity, growing)) return MZ_FALSE; } + return MZ_TRUE; +} + +static MZ_FORCEINLINE mz_bool mz_zip_array_resize(mz_zip_archive *pZip, mz_zip_array *pArray, size_t new_size, mz_uint growing) +{ + if (new_size > pArray->m_capacity) { if (!mz_zip_array_ensure_capacity(pZip, pArray, new_size, growing)) return MZ_FALSE; } + pArray->m_size = new_size; + return MZ_TRUE; +} + +static MZ_FORCEINLINE mz_bool mz_zip_array_ensure_room(mz_zip_archive *pZip, mz_zip_array *pArray, size_t n) +{ + return mz_zip_array_reserve(pZip, pArray, pArray->m_size + n, MZ_TRUE); +} + +static MZ_FORCEINLINE mz_bool mz_zip_array_push_back(mz_zip_archive *pZip, mz_zip_array *pArray, const void *pElements, size_t n) +{ + size_t orig_size = pArray->m_size; if (!mz_zip_array_resize(pZip, pArray, orig_size + n, MZ_TRUE)) return MZ_FALSE; + memcpy((mz_uint8*)pArray->m_p + orig_size * pArray->m_element_size, pElements, n * pArray->m_element_size); + return MZ_TRUE; +} + +#ifndef MINIZ_NO_TIME +static time_t mz_zip_dos_to_time_t(int dos_time, int dos_date) +{ + struct tm tm; + memset(&tm, 0, sizeof(tm)); tm.tm_isdst = -1; + tm.tm_year = ((dos_date >> 9) & 127) + 1980 - 1900; tm.tm_mon = ((dos_date >> 5) & 15) - 1; tm.tm_mday = dos_date & 31; + tm.tm_hour = (dos_time >> 11) & 31; tm.tm_min = (dos_time >> 5) & 63; tm.tm_sec = (dos_time << 1) & 62; + return mktime(&tm); +} + +static void mz_zip_time_to_dos_time(time_t time, mz_uint16 *pDOS_time, mz_uint16 *pDOS_date) +{ + struct tm *tm = localtime(&time); + *pDOS_time = (mz_uint16)(((tm->tm_hour) << 11) + ((tm->tm_min) << 5) + ((tm->tm_sec) >> 1)); + *pDOS_date = (mz_uint16)(((tm->tm_year + 1900 - 1980) << 9) + ((tm->tm_mon + 1) << 5) + tm->tm_mday); +} +#endif + +#ifndef MINIZ_NO_STDIO +static mz_bool mz_zip_get_file_modified_time(const char *pFilename, mz_uint16 *pDOS_time, mz_uint16 *pDOS_date) +{ +#ifdef MINIZ_NO_TIME + (void)pFilename; *pDOS_date = *pDOS_time = 0; +#else + struct MZ_FILE_STAT_STRUCT file_stat; if (MZ_FILE_STAT(pFilename, &file_stat) != 0) return MZ_FALSE; + mz_zip_time_to_dos_time(file_stat.st_mtime, pDOS_time, pDOS_date); +#endif // #ifdef MINIZ_NO_TIME + return MZ_TRUE; +} + +static mz_bool mz_zip_set_file_times(const char *pFilename, time_t access_time, time_t modified_time) +{ +#ifndef MINIZ_NO_TIME + struct utimbuf t; t.actime = access_time; t.modtime = modified_time; + return !utime(pFilename, &t); +#else + pFilename, access_time, modified_time; + return MZ_TRUE; +#endif // #ifndef MINIZ_NO_TIME +} +#endif + +static mz_bool mz_zip_reader_init_internal(mz_zip_archive *pZip, mz_uint32 flags) +{ + (void)flags; + if ((!pZip) || (pZip->m_pState) || (pZip->m_zip_mode != MZ_ZIP_MODE_INVALID)) + return MZ_FALSE; + + if (!pZip->m_pAlloc) pZip->m_pAlloc = def_alloc_func; + if (!pZip->m_pFree) pZip->m_pFree = def_free_func; + if (!pZip->m_pRealloc) pZip->m_pRealloc = def_realloc_func; + + pZip->m_zip_mode = MZ_ZIP_MODE_READING; + pZip->m_archive_size = 0; + pZip->m_central_directory_file_ofs = 0; + pZip->m_total_files = 0; + + if (NULL == (pZip->m_pState = (mz_zip_internal_state *)pZip->m_pAlloc(pZip->m_pAlloc_opaque, 1, sizeof(mz_zip_internal_state)))) + return MZ_FALSE; + memset(pZip->m_pState, 0, sizeof(mz_zip_internal_state)); + MZ_ZIP_ARRAY_SET_ELEMENT_SIZE(&pZip->m_pState->m_central_dir, sizeof(mz_uint8)); + MZ_ZIP_ARRAY_SET_ELEMENT_SIZE(&pZip->m_pState->m_central_dir_offsets, sizeof(mz_uint32)); + MZ_ZIP_ARRAY_SET_ELEMENT_SIZE(&pZip->m_pState->m_sorted_central_dir_offsets, sizeof(mz_uint32)); + return MZ_TRUE; +} + +static MZ_FORCEINLINE mz_bool mz_zip_reader_filename_less(const mz_zip_array *pCentral_dir_array, const mz_zip_array *pCentral_dir_offsets, mz_uint l_index, mz_uint r_index) +{ + const mz_uint8 *pL = &MZ_ZIP_ARRAY_ELEMENT(pCentral_dir_array, mz_uint8, MZ_ZIP_ARRAY_ELEMENT(pCentral_dir_offsets, mz_uint32, l_index)), *pE; + const mz_uint8 *pR = &MZ_ZIP_ARRAY_ELEMENT(pCentral_dir_array, mz_uint8, MZ_ZIP_ARRAY_ELEMENT(pCentral_dir_offsets, mz_uint32, r_index)); + mz_uint l_len = MZ_READ_LE16(pL + MZ_ZIP_CDH_FILENAME_LEN_OFS), r_len = MZ_READ_LE16(pR + MZ_ZIP_CDH_FILENAME_LEN_OFS); + mz_uint8 l = 0, r = 0; + pL += MZ_ZIP_CENTRAL_DIR_HEADER_SIZE; pR += MZ_ZIP_CENTRAL_DIR_HEADER_SIZE; + pE = pL + MZ_MIN(l_len, r_len); + while (pL < pE) + { + if ((l = MZ_TOLOWER(*pL)) != (r = MZ_TOLOWER(*pR))) + break; + pL++; pR++; + } + return (pL == pE) ? (l_len < r_len) : (l < r); +} + +#define MZ_SWAP_UINT32(a, b) do { mz_uint32 t = a; a = b; b = t; } MZ_MACRO_END + +// Heap sort of lowercased filenames, used to help accelerate plain central directory searches by mz_zip_reader_locate_file(). (Could also use qsort(), but it could allocate memory.) +static void mz_zip_reader_sort_central_dir_offsets_by_filename(mz_zip_archive *pZip) +{ + mz_zip_internal_state *pState = pZip->m_pState; + const mz_zip_array *pCentral_dir_offsets = &pState->m_central_dir_offsets; + const mz_zip_array *pCentral_dir = &pState->m_central_dir; + mz_uint32 *pIndices = &MZ_ZIP_ARRAY_ELEMENT(&pState->m_sorted_central_dir_offsets, mz_uint32, 0); + const int size = pZip->m_total_files; + int start = (size - 2) >> 1, end; + while (start >= 0) + { + int child, root = start; + for ( ; ; ) + { + if ((child = (root << 1) + 1) >= size) + break; + child += (((child + 1) < size) && (mz_zip_reader_filename_less(pCentral_dir, pCentral_dir_offsets, pIndices[child], pIndices[child + 1]))); + if (!mz_zip_reader_filename_less(pCentral_dir, pCentral_dir_offsets, pIndices[root], pIndices[child])) + break; + MZ_SWAP_UINT32(pIndices[root], pIndices[child]); root = child; + } + start--; + } + + end = size - 1; + while (end > 0) + { + int child, root = 0; + MZ_SWAP_UINT32(pIndices[end], pIndices[0]); + for ( ; ; ) + { + if ((child = (root << 1) + 1) >= end) + break; + child += (((child + 1) < end) && mz_zip_reader_filename_less(pCentral_dir, pCentral_dir_offsets, pIndices[child], pIndices[child + 1])); + if (!mz_zip_reader_filename_less(pCentral_dir, pCentral_dir_offsets, pIndices[root], pIndices[child])) + break; + MZ_SWAP_UINT32(pIndices[root], pIndices[child]); root = child; + } + end--; + } +} + +static mz_bool mz_zip_reader_read_central_dir(mz_zip_archive *pZip, mz_uint32 flags) +{ + mz_uint cdir_size, num_this_disk, cdir_disk_index; + mz_uint64 cdir_ofs; + mz_int64 cur_file_ofs; + const mz_uint8 *p; + mz_uint32 buf_u32[4096 / sizeof(mz_uint32)]; mz_uint8 *pBuf = (mz_uint8 *)buf_u32; + // Basic sanity checks - reject files which are too small, and check the first 4 bytes of the file to make sure a local header is there. + if (pZip->m_archive_size < MZ_ZIP_END_OF_CENTRAL_DIR_HEADER_SIZE) + return MZ_FALSE; + // Find the end of central directory record by scanning the file from the end towards the beginning. + cur_file_ofs = MZ_MAX((mz_int64)pZip->m_archive_size - (mz_int64)sizeof(buf_u32), 0); + for ( ; ; ) + { + int i, n = (int)MZ_MIN(sizeof(buf_u32), pZip->m_archive_size - cur_file_ofs); + if (pZip->m_pRead(pZip->m_pIO_opaque, cur_file_ofs, pBuf, n) != (mz_uint)n) + return MZ_FALSE; + for (i = n - 4; i >= 0; --i) + if (MZ_READ_LE32(pBuf + i) == MZ_ZIP_END_OF_CENTRAL_DIR_HEADER_SIG) + break; + if (i >= 0) + { + cur_file_ofs += i; + break; + } + if ((!cur_file_ofs) || ((pZip->m_archive_size - cur_file_ofs) >= (0xFFFF + MZ_ZIP_END_OF_CENTRAL_DIR_HEADER_SIZE))) + return MZ_FALSE; + cur_file_ofs = MZ_MAX(cur_file_ofs - (sizeof(buf_u32) - 3), 0); + } + // Read and verify the end of central directory record. + if (pZip->m_pRead(pZip->m_pIO_opaque, cur_file_ofs, pBuf, MZ_ZIP_END_OF_CENTRAL_DIR_HEADER_SIZE) != MZ_ZIP_END_OF_CENTRAL_DIR_HEADER_SIZE) + return MZ_FALSE; + if ((MZ_READ_LE32(pBuf + MZ_ZIP_ECDH_SIG_OFS) != MZ_ZIP_END_OF_CENTRAL_DIR_HEADER_SIG) || + ((pZip->m_total_files = MZ_READ_LE16(pBuf + MZ_ZIP_ECDH_CDIR_TOTAL_ENTRIES_OFS)) != MZ_READ_LE16(pBuf + MZ_ZIP_ECDH_CDIR_NUM_ENTRIES_ON_DISK_OFS))) + return MZ_FALSE; + + num_this_disk = MZ_READ_LE16(pBuf + MZ_ZIP_ECDH_NUM_THIS_DISK_OFS); + cdir_disk_index = MZ_READ_LE16(pBuf + MZ_ZIP_ECDH_NUM_DISK_CDIR_OFS); + if (((num_this_disk | cdir_disk_index) != 0) && ((num_this_disk != 1) || (cdir_disk_index != 1))) + return MZ_FALSE; + + if ((cdir_size = MZ_READ_LE32(pBuf + MZ_ZIP_ECDH_CDIR_SIZE_OFS)) < pZip->m_total_files * MZ_ZIP_CENTRAL_DIR_HEADER_SIZE) + return MZ_FALSE; + + cdir_ofs = MZ_READ_LE32(pBuf + MZ_ZIP_ECDH_CDIR_OFS_OFS); + if ((cdir_ofs + (mz_uint64)cdir_size) > pZip->m_archive_size) + return MZ_FALSE; + + pZip->m_central_directory_file_ofs = cdir_ofs; + + if (pZip->m_total_files) + { + mz_uint i, n; + // Read the entire central directory into a heap block, and allocate another heap block to hold the unsorted central dir file record offsets, and another to hold the sorted indices. + if ((!mz_zip_array_resize(pZip, &pZip->m_pState->m_central_dir, cdir_size, MZ_FALSE)) || + (!mz_zip_array_resize(pZip, &pZip->m_pState->m_central_dir_offsets, pZip->m_total_files, MZ_FALSE)) || + (!mz_zip_array_resize(pZip, &pZip->m_pState->m_sorted_central_dir_offsets, pZip->m_total_files, MZ_FALSE))) + return MZ_FALSE; + if (pZip->m_pRead(pZip->m_pIO_opaque, cdir_ofs, pZip->m_pState->m_central_dir.m_p, cdir_size) != cdir_size) + return MZ_FALSE; + + // Now create an index into the central directory file records, do some basic sanity checking on each record, and check for zip64 entries (which are not yet supported). + p = (const mz_uint8 *)pZip->m_pState->m_central_dir.m_p; + for (n = cdir_size, i = 0; i < pZip->m_total_files; ++i) + { + mz_uint total_header_size, comp_size, decomp_size, disk_index; + if ((n < MZ_ZIP_CENTRAL_DIR_HEADER_SIZE) || (MZ_READ_LE32(p) != MZ_ZIP_CENTRAL_DIR_HEADER_SIG)) + return MZ_FALSE; + MZ_ZIP_ARRAY_ELEMENT(&pZip->m_pState->m_central_dir_offsets, mz_uint32, i) = (mz_uint32)(p - (const mz_uint8 *)pZip->m_pState->m_central_dir.m_p); + MZ_ZIP_ARRAY_ELEMENT(&pZip->m_pState->m_sorted_central_dir_offsets, mz_uint32, i) = i; + comp_size = MZ_READ_LE32(p + MZ_ZIP_CDH_COMPRESSED_SIZE_OFS); + decomp_size = MZ_READ_LE32(p + MZ_ZIP_CDH_DECOMPRESSED_SIZE_OFS); + if (((!MZ_READ_LE32(p + MZ_ZIP_CDH_METHOD_OFS)) && (decomp_size != comp_size)) || (decomp_size && !comp_size) || (decomp_size == 0xFFFFFFFF) || (comp_size == 0xFFFFFFFF)) + return MZ_FALSE; + disk_index = MZ_READ_LE16(p + MZ_ZIP_CDH_DISK_START_OFS); + if ((disk_index != num_this_disk) && (disk_index != 1)) + return MZ_FALSE; + if (((mz_uint64)MZ_READ_LE32(p + MZ_ZIP_CDH_LOCAL_HEADER_OFS) + MZ_ZIP_LOCAL_DIR_HEADER_SIZE + comp_size) > pZip->m_archive_size) + return MZ_FALSE; + if ((total_header_size = MZ_ZIP_CENTRAL_DIR_HEADER_SIZE + MZ_READ_LE16(p + MZ_ZIP_CDH_FILENAME_LEN_OFS) + MZ_READ_LE16(p + MZ_ZIP_CDH_EXTRA_LEN_OFS) + MZ_READ_LE16(p + MZ_ZIP_CDH_COMMENT_LEN_OFS)) > n) + return MZ_FALSE; + n -= total_header_size; p += total_header_size; + } + } + + if ((flags & MZ_ZIP_FLAG_DO_NOT_SORT_CENTRAL_DIRECTORY) == 0) + mz_zip_reader_sort_central_dir_offsets_by_filename(pZip); + + return MZ_TRUE; +} + +mz_bool mz_zip_reader_init(mz_zip_archive *pZip, mz_uint64 size, mz_uint32 flags) +{ + if ((!pZip) || (!pZip->m_pRead)) + return MZ_FALSE; + if (!mz_zip_reader_init_internal(pZip, flags)) + return MZ_FALSE; + pZip->m_archive_size = size; + if (!mz_zip_reader_read_central_dir(pZip, flags)) + { + mz_zip_reader_end(pZip); + return MZ_FALSE; + } + return MZ_TRUE; +} + +static size_t mz_zip_mem_read_func(void *pOpaque, mz_uint64 file_ofs, void *pBuf, size_t n) +{ + mz_zip_archive *pZip = (mz_zip_archive *)pOpaque; + size_t s = (file_ofs >= pZip->m_archive_size) ? 0 : (size_t)MZ_MIN(pZip->m_archive_size - file_ofs, n); + memcpy(pBuf, (const mz_uint8 *)pZip->m_pState->m_pMem + file_ofs, s); + return s; +} + +mz_bool mz_zip_reader_init_mem(mz_zip_archive *pZip, const void *pMem, size_t size, mz_uint32 flags) +{ + if (!mz_zip_reader_init_internal(pZip, flags)) + return MZ_FALSE; + pZip->m_archive_size = size; + pZip->m_pRead = mz_zip_mem_read_func; + pZip->m_pIO_opaque = pZip; + pZip->m_pState->m_pMem = (void *)pMem; + pZip->m_pState->m_mem_size = size; + if (!mz_zip_reader_read_central_dir(pZip, flags)) + { + mz_zip_reader_end(pZip); + return MZ_FALSE; + } + return MZ_TRUE; +} + +#ifndef MINIZ_NO_STDIO +static size_t mz_zip_file_read_func(void *pOpaque, mz_uint64 file_ofs, void *pBuf, size_t n) +{ + mz_zip_archive *pZip = (mz_zip_archive *)pOpaque; + mz_int64 cur_ofs = MZ_FTELL64(pZip->m_pState->m_pFile); + if (((mz_int64)file_ofs < 0) || (((cur_ofs != (mz_int64)file_ofs)) && (MZ_FSEEK64(pZip->m_pState->m_pFile, (mz_int64)file_ofs, SEEK_SET)))) + return 0; + return MZ_FREAD(pBuf, 1, n, pZip->m_pState->m_pFile); +} + +mz_bool mz_zip_reader_init_file(mz_zip_archive *pZip, const char *pFilename, mz_uint32 flags) +{ + mz_uint64 file_size; + MZ_FILE *pFile = MZ_FOPEN(pFilename, "rb"); + if (!pFile) + return MZ_FALSE; + if (MZ_FSEEK64(pFile, 0, SEEK_END)) + return MZ_FALSE; + file_size = MZ_FTELL64(pFile); + if (!mz_zip_reader_init_internal(pZip, flags)) + { + MZ_FCLOSE(pFile); + return MZ_FALSE; + } + pZip->m_pRead = mz_zip_file_read_func; + pZip->m_pIO_opaque = pZip; + pZip->m_pState->m_pFile = pFile; + pZip->m_archive_size = file_size; + if (!mz_zip_reader_read_central_dir(pZip, flags)) + { + mz_zip_reader_end(pZip); + return MZ_FALSE; + } + return MZ_TRUE; +} +#endif // #ifndef MINIZ_NO_STDIO + +mz_uint mz_zip_reader_get_num_files(mz_zip_archive *pZip) +{ + return pZip ? pZip->m_total_files : 0; +} + +static MZ_FORCEINLINE const mz_uint8 *mz_zip_reader_get_cdh(mz_zip_archive *pZip, mz_uint file_index) +{ + if ((!pZip) || (!pZip->m_pState) || (file_index >= pZip->m_total_files) || (pZip->m_zip_mode != MZ_ZIP_MODE_READING)) + return NULL; + return &MZ_ZIP_ARRAY_ELEMENT(&pZip->m_pState->m_central_dir, mz_uint8, MZ_ZIP_ARRAY_ELEMENT(&pZip->m_pState->m_central_dir_offsets, mz_uint32, file_index)); +} + +mz_bool mz_zip_reader_is_file_encrypted(mz_zip_archive *pZip, mz_uint file_index) +{ + mz_uint m_bit_flag; + const mz_uint8 *p = mz_zip_reader_get_cdh(pZip, file_index); + if (!p) + return MZ_FALSE; + m_bit_flag = MZ_READ_LE16(p + MZ_ZIP_CDH_BIT_FLAG_OFS); + return (m_bit_flag & 1); +} + +mz_bool mz_zip_reader_is_file_a_directory(mz_zip_archive *pZip, mz_uint file_index) +{ + mz_uint filename_len, internal_attr, external_attr; + const mz_uint8 *p = mz_zip_reader_get_cdh(pZip, file_index); + if (!p) + return MZ_FALSE; + + internal_attr = MZ_READ_LE16(p + MZ_ZIP_CDH_INTERNAL_ATTR_OFS); + external_attr = MZ_READ_LE32(p + MZ_ZIP_CDH_EXTERNAL_ATTR_OFS); + if ((!internal_attr) && ((external_attr & 0x10) != 0)) + return MZ_TRUE; + + filename_len = MZ_READ_LE16(p + MZ_ZIP_CDH_FILENAME_LEN_OFS); + if (filename_len) + { + if (*(p + MZ_ZIP_CENTRAL_DIR_HEADER_SIZE + filename_len - 1) == '/') + return MZ_TRUE; + } + + return MZ_FALSE; +} + +mz_bool mz_zip_reader_file_stat(mz_zip_archive *pZip, mz_uint file_index, mz_zip_archive_file_stat *pStat) +{ + mz_uint n; + const mz_uint8 *p = mz_zip_reader_get_cdh(pZip, file_index); + if ((!p) || (!pStat)) + return MZ_FALSE; + + // Unpack the central directory record. + pStat->m_file_index = file_index; + pStat->m_central_dir_ofs = MZ_ZIP_ARRAY_ELEMENT(&pZip->m_pState->m_central_dir_offsets, mz_uint32, file_index); + pStat->m_version_made_by = MZ_READ_LE16(p + MZ_ZIP_CDH_VERSION_MADE_BY_OFS); + pStat->m_version_needed = MZ_READ_LE16(p + MZ_ZIP_CDH_VERSION_NEEDED_OFS); + pStat->m_bit_flag = MZ_READ_LE16(p + MZ_ZIP_CDH_BIT_FLAG_OFS); + pStat->m_method = MZ_READ_LE16(p + MZ_ZIP_CDH_METHOD_OFS); +#ifndef MINIZ_NO_TIME + pStat->m_time = mz_zip_dos_to_time_t(MZ_READ_LE16(p + MZ_ZIP_CDH_FILE_TIME_OFS), MZ_READ_LE16(p + MZ_ZIP_CDH_FILE_DATE_OFS)); +#endif + pStat->m_crc32 = MZ_READ_LE32(p + MZ_ZIP_CDH_CRC32_OFS); + pStat->m_comp_size = MZ_READ_LE32(p + MZ_ZIP_CDH_COMPRESSED_SIZE_OFS); + pStat->m_uncomp_size = MZ_READ_LE32(p + MZ_ZIP_CDH_DECOMPRESSED_SIZE_OFS); + pStat->m_internal_attr = MZ_READ_LE16(p + MZ_ZIP_CDH_INTERNAL_ATTR_OFS); + pStat->m_external_attr = MZ_READ_LE32(p + MZ_ZIP_CDH_EXTERNAL_ATTR_OFS); + pStat->m_local_header_ofs = MZ_READ_LE32(p + MZ_ZIP_CDH_LOCAL_HEADER_OFS); + + // Copy as much of the filename and comment as possible. + n = MZ_READ_LE16(p + MZ_ZIP_CDH_FILENAME_LEN_OFS); n = MZ_MIN(n, MZ_ZIP_MAX_ARCHIVE_FILENAME_SIZE - 1); + memcpy(pStat->m_filename, p + MZ_ZIP_CENTRAL_DIR_HEADER_SIZE, n); pStat->m_filename[n] = '\0'; + + n = MZ_READ_LE16(p + MZ_ZIP_CDH_COMMENT_LEN_OFS); n = MZ_MIN(n, MZ_ZIP_MAX_ARCHIVE_FILE_COMMENT_SIZE - 1); + pStat->m_comment_size = n; + memcpy(pStat->m_comment, p + MZ_ZIP_CENTRAL_DIR_HEADER_SIZE + MZ_READ_LE16(p + MZ_ZIP_CDH_FILENAME_LEN_OFS) + MZ_READ_LE16(p + MZ_ZIP_CDH_EXTRA_LEN_OFS), n); pStat->m_comment[n] = '\0'; + + return MZ_TRUE; +} + +mz_uint mz_zip_reader_get_filename(mz_zip_archive *pZip, mz_uint file_index, char *pFilename, mz_uint filename_buf_size) +{ + mz_uint n; + const mz_uint8 *p = mz_zip_reader_get_cdh(pZip, file_index); + if (!p) { if (filename_buf_size) pFilename[0] = '\0'; return 0; } + n = MZ_READ_LE16(p + MZ_ZIP_CDH_FILENAME_LEN_OFS); + if (filename_buf_size) + { + n = MZ_MIN(n, filename_buf_size - 1); + memcpy(pFilename, p + MZ_ZIP_CENTRAL_DIR_HEADER_SIZE, n); + pFilename[n] = '\0'; + } + return n + 1; +} + +static MZ_FORCEINLINE mz_bool mz_zip_reader_string_equal(const char *pA, const char *pB, mz_uint len, mz_uint flags) +{ + mz_uint i; + if (flags & MZ_ZIP_FLAG_CASE_SENSITIVE) + return 0 == memcmp(pA, pB, len); + for (i = 0; i < len; ++i) + if (MZ_TOLOWER(pA[i]) != MZ_TOLOWER(pB[i])) + return MZ_FALSE; + return MZ_TRUE; +} + +static MZ_FORCEINLINE int mz_zip_reader_filename_compare(const mz_zip_array *pCentral_dir_array, const mz_zip_array *pCentral_dir_offsets, mz_uint l_index, const char *pR, mz_uint r_len) +{ + const mz_uint8 *pL = &MZ_ZIP_ARRAY_ELEMENT(pCentral_dir_array, mz_uint8, MZ_ZIP_ARRAY_ELEMENT(pCentral_dir_offsets, mz_uint32, l_index)), *pE; + mz_uint l_len = MZ_READ_LE16(pL + MZ_ZIP_CDH_FILENAME_LEN_OFS); + mz_uint8 l = 0, r = 0; + pL += MZ_ZIP_CENTRAL_DIR_HEADER_SIZE; + pE = pL + MZ_MIN(l_len, r_len); + while (pL < pE) + { + if ((l = MZ_TOLOWER(*pL)) != (r = MZ_TOLOWER(*pR))) + break; + pL++; pR++; + } + return (pL == pE) ? (int)(l_len - r_len) : (l - r); +} + +static int mz_zip_reader_locate_file_binary_search(mz_zip_archive *pZip, const char *pFilename) +{ + mz_zip_internal_state *pState = pZip->m_pState; + const mz_zip_array *pCentral_dir_offsets = &pState->m_central_dir_offsets; + const mz_zip_array *pCentral_dir = &pState->m_central_dir; + mz_uint32 *pIndices = &MZ_ZIP_ARRAY_ELEMENT(&pState->m_sorted_central_dir_offsets, mz_uint32, 0); + const int size = pZip->m_total_files; + const mz_uint filename_len = (mz_uint)strlen(pFilename); + int l = 0, h = size - 1; + while (l <= h) + { + int m = (l + h) >> 1, file_index = pIndices[m], comp = mz_zip_reader_filename_compare(pCentral_dir, pCentral_dir_offsets, file_index, pFilename, filename_len); + if (!comp) + return file_index; + else if (comp < 0) + l = m + 1; + else + h = m - 1; + } + return -1; +} + +int mz_zip_reader_locate_file(mz_zip_archive *pZip, const char *pName, const char *pComment, mz_uint flags) +{ + mz_uint file_index; size_t name_len, comment_len; + if ((!pZip) || (!pZip->m_pState) || (!pName) || (pZip->m_zip_mode != MZ_ZIP_MODE_READING)) + return -1; + if (((flags & (MZ_ZIP_FLAG_IGNORE_PATH | MZ_ZIP_FLAG_CASE_SENSITIVE)) == 0) && (!pComment) && (pZip->m_pState->m_sorted_central_dir_offsets.m_p)) + return mz_zip_reader_locate_file_binary_search(pZip, pName); + name_len = strlen(pName); if (name_len > 0xFFFF) return -1; + comment_len = pComment ? strlen(pComment) : 0; if (comment_len > 0xFFFF) return -1; + for (file_index = 0; file_index < pZip->m_total_files; file_index++) + { + const mz_uint8 *pHeader = &MZ_ZIP_ARRAY_ELEMENT(&pZip->m_pState->m_central_dir, mz_uint8, MZ_ZIP_ARRAY_ELEMENT(&pZip->m_pState->m_central_dir_offsets, mz_uint32, file_index)); + mz_uint filename_len = MZ_READ_LE16(pHeader + MZ_ZIP_CDH_FILENAME_LEN_OFS); + const char *pFilename = (const char *)pHeader + MZ_ZIP_CENTRAL_DIR_HEADER_SIZE; + if (filename_len < name_len) + continue; + if (comment_len) + { + mz_uint file_extra_len = MZ_READ_LE16(pHeader + MZ_ZIP_CDH_EXTRA_LEN_OFS), file_comment_len = MZ_READ_LE16(pHeader + MZ_ZIP_CDH_COMMENT_LEN_OFS); + const char *pFile_comment = pFilename + filename_len + file_extra_len; + if ((file_comment_len != comment_len) || (!mz_zip_reader_string_equal(pComment, pFile_comment, file_comment_len, flags))) + continue; + } + if ((flags & MZ_ZIP_FLAG_IGNORE_PATH) && (filename_len)) + { + int ofs = filename_len - 1; + do + { + if ((pFilename[ofs] == '/') || (pFilename[ofs] == '\\') || (pFilename[ofs] == ':')) + break; + } while (--ofs >= 0); + ofs++; + pFilename += ofs; filename_len -= ofs; + } + if ((filename_len == name_len) && (mz_zip_reader_string_equal(pName, pFilename, filename_len, flags))) + return file_index; + } + return -1; +} + +mz_bool mz_zip_reader_extract_to_mem_no_alloc(mz_zip_archive *pZip, mz_uint file_index, void *pBuf, size_t buf_size, mz_uint flags, void *pUser_read_buf, size_t user_read_buf_size) +{ + int status = TINFL_STATUS_DONE; + mz_uint64 needed_size, cur_file_ofs, comp_remaining, out_buf_ofs = 0, read_buf_size, read_buf_ofs = 0, read_buf_avail; + mz_zip_archive_file_stat file_stat; + void *pRead_buf; + mz_uint32 local_header_u32[(MZ_ZIP_LOCAL_DIR_HEADER_SIZE + sizeof(mz_uint32) - 1) / sizeof(mz_uint32)]; mz_uint8 *pLocal_header = (mz_uint8 *)local_header_u32; + tinfl_decompressor inflator; + + if ((buf_size) && (!pBuf)) + return MZ_FALSE; + + if (!mz_zip_reader_file_stat(pZip, file_index, &file_stat)) + return MZ_FALSE; + + if (!file_stat.m_comp_size) + return MZ_TRUE; + + // Encryption and patch files are not supported. + if (file_stat.m_bit_flag & (1 | 32)) + return MZ_FALSE; + + // This function only supports stored and deflate. + if ((!(flags & MZ_ZIP_FLAG_COMPRESSED_DATA)) && (file_stat.m_method != 0) && (file_stat.m_method != MZ_DEFLATED)) + return MZ_FALSE; + + // Ensure supplied output buffer is large enough. + needed_size = (flags & MZ_ZIP_FLAG_COMPRESSED_DATA) ? file_stat.m_comp_size : file_stat.m_uncomp_size; + if (buf_size < needed_size) + return MZ_FALSE; + + // Read and parse the local directory entry. + cur_file_ofs = file_stat.m_local_header_ofs; + if (pZip->m_pRead(pZip->m_pIO_opaque, cur_file_ofs, pLocal_header, MZ_ZIP_LOCAL_DIR_HEADER_SIZE) != MZ_ZIP_LOCAL_DIR_HEADER_SIZE) + return MZ_FALSE; + if (MZ_READ_LE32(pLocal_header) != MZ_ZIP_LOCAL_DIR_HEADER_SIG) + return MZ_FALSE; + + cur_file_ofs += MZ_ZIP_LOCAL_DIR_HEADER_SIZE + MZ_READ_LE16(pLocal_header + MZ_ZIP_LDH_FILENAME_LEN_OFS) + MZ_READ_LE16(pLocal_header + MZ_ZIP_LDH_EXTRA_LEN_OFS); + if ((cur_file_ofs + file_stat.m_comp_size) > pZip->m_archive_size) + return MZ_FALSE; + + if ((flags & MZ_ZIP_FLAG_COMPRESSED_DATA) || (!file_stat.m_method)) + { + // The file is stored or the caller has requested the compressed data. + if (pZip->m_pRead(pZip->m_pIO_opaque, cur_file_ofs, pBuf, (size_t)needed_size) != needed_size) + return MZ_FALSE; + return ((flags & MZ_ZIP_FLAG_COMPRESSED_DATA) != 0) || (mz_crc32(MZ_CRC32_INIT, (const mz_uint8 *)pBuf, (size_t)file_stat.m_uncomp_size) == file_stat.m_crc32); + } + + // Decompress the file either directly from memory or from a file input buffer. + tinfl_init(&inflator); + + if (pZip->m_pState->m_pMem) + { + // Read directly from the archive in memory. + pRead_buf = (mz_uint8 *)pZip->m_pState->m_pMem + cur_file_ofs; + read_buf_size = read_buf_avail = file_stat.m_comp_size; + comp_remaining = 0; + } + else if (pUser_read_buf) + { + // Use a user provided read buffer. + if (!user_read_buf_size) + return MZ_FALSE; + pRead_buf = (mz_uint8 *)pUser_read_buf; + read_buf_size = user_read_buf_size; + read_buf_avail = 0; + comp_remaining = file_stat.m_uncomp_size; + } + else + { + // Temporarily allocate a read buffer. + read_buf_size = MZ_MIN(file_stat.m_comp_size, MZ_ZIP_MAX_IO_BUF_SIZE); +#ifdef _MSC_VER + if (((0, sizeof(size_t) == sizeof(mz_uint32))) && (read_buf_size > 0x7FFFFFFF)) +#else + if (((sizeof(size_t) == sizeof(mz_uint32))) && (read_buf_size > 0x7FFFFFFF)) +#endif + return MZ_FALSE; + if (NULL == (pRead_buf = pZip->m_pAlloc(pZip->m_pAlloc_opaque, 1, (size_t)read_buf_size))) + return MZ_FALSE; + read_buf_avail = 0; + comp_remaining = file_stat.m_comp_size; + } + + do + { + size_t in_buf_size, out_buf_size = (size_t)(file_stat.m_uncomp_size - out_buf_ofs); + if ((!read_buf_avail) && (!pZip->m_pState->m_pMem)) + { + read_buf_avail = MZ_MIN(read_buf_size, comp_remaining); + if (pZip->m_pRead(pZip->m_pIO_opaque, cur_file_ofs, pRead_buf, (size_t)read_buf_avail) != read_buf_avail) + { + status = TINFL_STATUS_FAILED; + break; + } + cur_file_ofs += read_buf_avail; + comp_remaining -= read_buf_avail; + read_buf_ofs = 0; + } + in_buf_size = (size_t)read_buf_avail; + status = tinfl_decompress(&inflator, (mz_uint8 *)pRead_buf + read_buf_ofs, &in_buf_size, (mz_uint8 *)pBuf, (mz_uint8 *)pBuf + out_buf_ofs, &out_buf_size, TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF | (comp_remaining ? TINFL_FLAG_HAS_MORE_INPUT : 0)); + read_buf_avail -= in_buf_size; + read_buf_ofs += in_buf_size; + out_buf_ofs += out_buf_size; + } while (status == TINFL_STATUS_NEEDS_MORE_INPUT); + + if (status == TINFL_STATUS_DONE) + { + // Make sure the entire file was decompressed, and check its CRC. + if ((out_buf_ofs != file_stat.m_uncomp_size) || (mz_crc32(MZ_CRC32_INIT, (const mz_uint8 *)pBuf, (size_t)file_stat.m_uncomp_size) != file_stat.m_crc32)) + status = TINFL_STATUS_FAILED; + } + + if ((!pZip->m_pState->m_pMem) && (!pUser_read_buf)) + pZip->m_pFree(pZip->m_pAlloc_opaque, pRead_buf); + + return status == TINFL_STATUS_DONE; +} + +mz_bool mz_zip_reader_extract_file_to_mem_no_alloc(mz_zip_archive *pZip, const char *pFilename, void *pBuf, size_t buf_size, mz_uint flags, void *pUser_read_buf, size_t user_read_buf_size) +{ + int file_index = mz_zip_reader_locate_file(pZip, pFilename, NULL, flags); + if (file_index < 0) + return MZ_FALSE; + return mz_zip_reader_extract_to_mem_no_alloc(pZip, file_index, pBuf, buf_size, flags, pUser_read_buf, user_read_buf_size); +} + +mz_bool mz_zip_reader_extract_to_mem(mz_zip_archive *pZip, mz_uint file_index, void *pBuf, size_t buf_size, mz_uint flags) +{ + return mz_zip_reader_extract_to_mem_no_alloc(pZip, file_index, pBuf, buf_size, flags, NULL, 0); +} + +mz_bool mz_zip_reader_extract_file_to_mem(mz_zip_archive *pZip, const char *pFilename, void *pBuf, size_t buf_size, mz_uint flags) +{ + return mz_zip_reader_extract_file_to_mem_no_alloc(pZip, pFilename, pBuf, buf_size, flags, NULL, 0); +} + +void *mz_zip_reader_extract_to_heap(mz_zip_archive *pZip, mz_uint file_index, size_t *pSize, mz_uint flags) +{ + mz_uint64 comp_size, uncomp_size, alloc_size; + const mz_uint8 *p = mz_zip_reader_get_cdh(pZip, file_index); + void *pBuf; + + if (pSize) + *pSize = 0; + if (!p) + return NULL; + + comp_size = MZ_READ_LE32(p + MZ_ZIP_CDH_COMPRESSED_SIZE_OFS); + uncomp_size = MZ_READ_LE32(p + MZ_ZIP_CDH_DECOMPRESSED_SIZE_OFS); + + alloc_size = (flags & MZ_ZIP_FLAG_COMPRESSED_DATA) ? comp_size : uncomp_size; +#ifdef _MSC_VER + if (((0, sizeof(size_t) == sizeof(mz_uint32))) && (alloc_size > 0x7FFFFFFF)) +#else + if (((sizeof(size_t) == sizeof(mz_uint32))) && (alloc_size > 0x7FFFFFFF)) +#endif + return NULL; + if (NULL == (pBuf = pZip->m_pAlloc(pZip->m_pAlloc_opaque, 1, (size_t)alloc_size))) + return NULL; + + if (!mz_zip_reader_extract_to_mem(pZip, file_index, pBuf, (size_t)alloc_size, flags)) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pBuf); + return NULL; + } + + if (pSize) *pSize = (size_t)alloc_size; + return pBuf; +} + +void *mz_zip_reader_extract_file_to_heap(mz_zip_archive *pZip, const char *pFilename, size_t *pSize, mz_uint flags) +{ + int file_index = mz_zip_reader_locate_file(pZip, pFilename, NULL, flags); + if (file_index < 0) + { + if (pSize) *pSize = 0; + return MZ_FALSE; + } + return mz_zip_reader_extract_to_heap(pZip, file_index, pSize, flags); +} + +mz_bool mz_zip_reader_extract_to_callback(mz_zip_archive *pZip, mz_uint file_index, mz_file_write_func pCallback, void *pOpaque, mz_uint flags) +{ + int status = TINFL_STATUS_DONE; mz_uint file_crc32 = MZ_CRC32_INIT; + mz_uint64 read_buf_size, read_buf_ofs = 0, read_buf_avail, comp_remaining, out_buf_ofs = 0, cur_file_ofs; + mz_zip_archive_file_stat file_stat; + void *pRead_buf = NULL; void *pWrite_buf = NULL; + mz_uint32 local_header_u32[(MZ_ZIP_LOCAL_DIR_HEADER_SIZE + sizeof(mz_uint32) - 1) / sizeof(mz_uint32)]; mz_uint8 *pLocal_header = (mz_uint8 *)local_header_u32; + + if (!mz_zip_reader_file_stat(pZip, file_index, &file_stat)) + return MZ_FALSE; + + if (!file_stat.m_comp_size) + return MZ_TRUE; + + // Encryption and patch files are not supported. + if (file_stat.m_bit_flag & (1 | 32)) + return MZ_FALSE; + + // This function only supports stored and deflate. + if ((!(flags & MZ_ZIP_FLAG_COMPRESSED_DATA)) && (file_stat.m_method != 0) && (file_stat.m_method != MZ_DEFLATED)) + return MZ_FALSE; + + // Read and parse the local directory entry. + cur_file_ofs = file_stat.m_local_header_ofs; + if (pZip->m_pRead(pZip->m_pIO_opaque, cur_file_ofs, pLocal_header, MZ_ZIP_LOCAL_DIR_HEADER_SIZE) != MZ_ZIP_LOCAL_DIR_HEADER_SIZE) + return MZ_FALSE; + if (MZ_READ_LE32(pLocal_header) != MZ_ZIP_LOCAL_DIR_HEADER_SIG) + return MZ_FALSE; + + cur_file_ofs += MZ_ZIP_LOCAL_DIR_HEADER_SIZE + MZ_READ_LE16(pLocal_header + MZ_ZIP_LDH_FILENAME_LEN_OFS) + MZ_READ_LE16(pLocal_header + MZ_ZIP_LDH_EXTRA_LEN_OFS); + if ((cur_file_ofs + file_stat.m_comp_size) > pZip->m_archive_size) + return MZ_FALSE; + + // Decompress the file either directly from memory or from a file input buffer. + if (pZip->m_pState->m_pMem) + { + pRead_buf = (mz_uint8 *)pZip->m_pState->m_pMem + cur_file_ofs; + read_buf_size = read_buf_avail = file_stat.m_comp_size; + comp_remaining = 0; + } + else + { + read_buf_size = MZ_MIN(file_stat.m_comp_size, MZ_ZIP_MAX_IO_BUF_SIZE); + if (NULL == (pRead_buf = pZip->m_pAlloc(pZip->m_pAlloc_opaque, 1, (size_t)read_buf_size))) + return MZ_FALSE; + read_buf_avail = 0; + comp_remaining = file_stat.m_comp_size; + } + + if ((flags & MZ_ZIP_FLAG_COMPRESSED_DATA) || (!file_stat.m_method)) + { + // The file is stored or the caller has requested the compressed data. + if (pZip->m_pState->m_pMem) + { +#ifdef _MSC_VER + if (((0, sizeof(size_t) == sizeof(mz_uint32))) && (file_stat.m_comp_size > 0xFFFFFFFF)) +#else + if (((sizeof(size_t) == sizeof(mz_uint32))) && (file_stat.m_comp_size > 0xFFFFFFFF)) +#endif + return MZ_FALSE; + if (pCallback(pOpaque, out_buf_ofs, pRead_buf, (size_t)file_stat.m_comp_size) != file_stat.m_comp_size) + status = TINFL_STATUS_FAILED; + else if (!(flags & MZ_ZIP_FLAG_COMPRESSED_DATA)) + file_crc32 = (mz_uint32)mz_crc32(file_crc32, (const mz_uint8 *)pRead_buf, (size_t)file_stat.m_comp_size); + cur_file_ofs += file_stat.m_comp_size; + out_buf_ofs += file_stat.m_comp_size; + comp_remaining = 0; + } + else + { + while (comp_remaining) + { + read_buf_avail = MZ_MIN(read_buf_size, comp_remaining); + if (pZip->m_pRead(pZip->m_pIO_opaque, cur_file_ofs, pRead_buf, (size_t)read_buf_avail) != read_buf_avail) + { + status = TINFL_STATUS_FAILED; + break; + } + + if (!(flags & MZ_ZIP_FLAG_COMPRESSED_DATA)) + file_crc32 = (mz_uint32)mz_crc32(file_crc32, (const mz_uint8 *)pRead_buf, (size_t)read_buf_avail); + + if (pCallback(pOpaque, out_buf_ofs, pRead_buf, (size_t)read_buf_avail) != read_buf_avail) + { + status = TINFL_STATUS_FAILED; + break; + } + cur_file_ofs += read_buf_avail; + out_buf_ofs += read_buf_avail; + comp_remaining -= read_buf_avail; + } + } + } + else + { + tinfl_decompressor inflator; + tinfl_init(&inflator); + + if (NULL == (pWrite_buf = pZip->m_pAlloc(pZip->m_pAlloc_opaque, 1, TINFL_LZ_DICT_SIZE))) + status = TINFL_STATUS_FAILED; + else + { + do + { + mz_uint8 *pWrite_buf_cur = (mz_uint8 *)pWrite_buf + (out_buf_ofs & (TINFL_LZ_DICT_SIZE - 1)); + size_t in_buf_size, out_buf_size = TINFL_LZ_DICT_SIZE - (out_buf_ofs & (TINFL_LZ_DICT_SIZE - 1)); + if ((!read_buf_avail) && (!pZip->m_pState->m_pMem)) + { + read_buf_avail = MZ_MIN(read_buf_size, comp_remaining); + if (pZip->m_pRead(pZip->m_pIO_opaque, cur_file_ofs, pRead_buf, (size_t)read_buf_avail) != read_buf_avail) + { + status = TINFL_STATUS_FAILED; + break; + } + cur_file_ofs += read_buf_avail; + comp_remaining -= read_buf_avail; + read_buf_ofs = 0; + } + + in_buf_size = (size_t)read_buf_avail; + status = tinfl_decompress(&inflator, (const mz_uint8 *)pRead_buf + read_buf_ofs, &in_buf_size, (mz_uint8 *)pWrite_buf, pWrite_buf_cur, &out_buf_size, comp_remaining ? TINFL_FLAG_HAS_MORE_INPUT : 0); + read_buf_avail -= in_buf_size; + read_buf_ofs += in_buf_size; + + if (out_buf_size) + { + if (pCallback(pOpaque, out_buf_ofs, pWrite_buf_cur, out_buf_size) != out_buf_size) + { + status = TINFL_STATUS_FAILED; + break; + } + file_crc32 = (mz_uint32)mz_crc32(file_crc32, pWrite_buf_cur, out_buf_size); + if ((out_buf_ofs += out_buf_size) > file_stat.m_uncomp_size) + { + status = TINFL_STATUS_FAILED; + break; + } + } + } while ((status == TINFL_STATUS_NEEDS_MORE_INPUT) || (status == TINFL_STATUS_HAS_MORE_OUTPUT)); + } + } + + if ((status == TINFL_STATUS_DONE) && (!(flags & MZ_ZIP_FLAG_COMPRESSED_DATA))) + { + // Make sure the entire file was decompressed, and check its CRC. + if ((out_buf_ofs != file_stat.m_uncomp_size) || (file_crc32 != file_stat.m_crc32)) + status = TINFL_STATUS_FAILED; + } + + if (!pZip->m_pState->m_pMem) + pZip->m_pFree(pZip->m_pAlloc_opaque, pRead_buf); + if (pWrite_buf) + pZip->m_pFree(pZip->m_pAlloc_opaque, pWrite_buf); + + return status == TINFL_STATUS_DONE; +} + +mz_bool mz_zip_reader_extract_file_to_callback(mz_zip_archive *pZip, const char *pFilename, mz_file_write_func pCallback, void *pOpaque, mz_uint flags) +{ + int file_index = mz_zip_reader_locate_file(pZip, pFilename, NULL, flags); + if (file_index < 0) + return MZ_FALSE; + return mz_zip_reader_extract_to_callback(pZip, file_index, pCallback, pOpaque, flags); +} + +#ifndef MINIZ_NO_STDIO +static size_t mz_zip_file_write_callback(void *pOpaque, mz_uint64 ofs, const void *pBuf, size_t n) +{ + (void)ofs; return MZ_FWRITE(pBuf, 1, n, (MZ_FILE*)pOpaque); +} + +mz_bool mz_zip_reader_extract_to_file(mz_zip_archive *pZip, mz_uint file_index, const char *pDst_filename, mz_uint flags) +{ + mz_bool status; + mz_zip_archive_file_stat file_stat; + MZ_FILE *pFile; + if (!mz_zip_reader_file_stat(pZip, file_index, &file_stat)) + return MZ_FALSE; + pFile = MZ_FOPEN(pDst_filename, "wb"); + if (!pFile) + return MZ_FALSE; + status = mz_zip_reader_extract_to_callback(pZip, file_index, mz_zip_file_write_callback, pFile, flags); + if (MZ_FCLOSE(pFile) == EOF) + return MZ_FALSE; +#ifndef MINIZ_NO_TIME + if (status) + mz_zip_set_file_times(pDst_filename, file_stat.m_time, file_stat.m_time); +#endif + return status; +} +#endif // #ifndef MINIZ_NO_STDIO + +mz_bool mz_zip_reader_end(mz_zip_archive *pZip) +{ + if ((!pZip) || (!pZip->m_pState) || (!pZip->m_pAlloc) || (!pZip->m_pFree) || (pZip->m_zip_mode != MZ_ZIP_MODE_READING)) + return MZ_FALSE; + + if (pZip->m_pState) + { + mz_zip_internal_state *pState = pZip->m_pState; pZip->m_pState = NULL; + mz_zip_array_clear(pZip, &pState->m_central_dir); + mz_zip_array_clear(pZip, &pState->m_central_dir_offsets); + mz_zip_array_clear(pZip, &pState->m_sorted_central_dir_offsets); + +#ifndef MINIZ_NO_STDIO + if (pState->m_pFile) + { + MZ_FCLOSE(pState->m_pFile); + pState->m_pFile = NULL; + } +#endif // #ifndef MINIZ_NO_STDIO + + pZip->m_pFree(pZip->m_pAlloc_opaque, pState); + } + pZip->m_zip_mode = MZ_ZIP_MODE_INVALID; + + return MZ_TRUE; +} + +#ifndef MINIZ_NO_STDIO +mz_bool mz_zip_reader_extract_file_to_file(mz_zip_archive *pZip, const char *pArchive_filename, const char *pDst_filename, mz_uint flags) +{ + int file_index = mz_zip_reader_locate_file(pZip, pArchive_filename, NULL, flags); + if (file_index < 0) + return MZ_FALSE; + return mz_zip_reader_extract_to_file(pZip, file_index, pDst_filename, flags); +} +#endif + +// ------------------- .ZIP archive writing + +#ifndef MINIZ_NO_ARCHIVE_WRITING_APIS + +static void mz_write_le16(mz_uint8 *p, mz_uint16 v) { p[0] = (mz_uint8)v; p[1] = (mz_uint8)(v >> 8); } +static void mz_write_le32(mz_uint8 *p, mz_uint32 v) { p[0] = (mz_uint8)v; p[1] = (mz_uint8)(v >> 8); p[2] = (mz_uint8)(v >> 16); p[3] = (mz_uint8)(v >> 24); } +#define MZ_WRITE_LE16(p, v) mz_write_le16((mz_uint8 *)(p), (mz_uint16)(v)) +#define MZ_WRITE_LE32(p, v) mz_write_le32((mz_uint8 *)(p), (mz_uint32)(v)) + +mz_bool mz_zip_writer_init(mz_zip_archive *pZip, mz_uint64 existing_size) +{ + if ((!pZip) || (pZip->m_pState) || (!pZip->m_pWrite) || (pZip->m_zip_mode != MZ_ZIP_MODE_INVALID)) + return MZ_FALSE; + + if (pZip->m_file_offset_alignment) + { + // Ensure user specified file offset alignment is a power of 2. + if (pZip->m_file_offset_alignment & (pZip->m_file_offset_alignment - 1)) + return MZ_FALSE; + } + + if (!pZip->m_pAlloc) pZip->m_pAlloc = def_alloc_func; + if (!pZip->m_pFree) pZip->m_pFree = def_free_func; + if (!pZip->m_pRealloc) pZip->m_pRealloc = def_realloc_func; + + pZip->m_zip_mode = MZ_ZIP_MODE_WRITING; + pZip->m_archive_size = existing_size; + pZip->m_central_directory_file_ofs = 0; + pZip->m_total_files = 0; + + if (NULL == (pZip->m_pState = (mz_zip_internal_state *)pZip->m_pAlloc(pZip->m_pAlloc_opaque, 1, sizeof(mz_zip_internal_state)))) + return MZ_FALSE; + memset(pZip->m_pState, 0, sizeof(mz_zip_internal_state)); + MZ_ZIP_ARRAY_SET_ELEMENT_SIZE(&pZip->m_pState->m_central_dir, sizeof(mz_uint8)); + MZ_ZIP_ARRAY_SET_ELEMENT_SIZE(&pZip->m_pState->m_central_dir_offsets, sizeof(mz_uint32)); + MZ_ZIP_ARRAY_SET_ELEMENT_SIZE(&pZip->m_pState->m_sorted_central_dir_offsets, sizeof(mz_uint32)); + return MZ_TRUE; +} + +static size_t mz_zip_heap_write_func(void *pOpaque, mz_uint64 file_ofs, const void *pBuf, size_t n) +{ + mz_zip_archive *pZip = (mz_zip_archive *)pOpaque; + mz_zip_internal_state *pState = pZip->m_pState; + mz_uint64 new_size = MZ_MAX(file_ofs + n, pState->m_mem_size); +#ifdef _MSC_VER + if ((!n) || ((0, sizeof(size_t) == sizeof(mz_uint32)) && (new_size > 0x7FFFFFFF))) +#else + if ((!n) || ((sizeof(size_t) == sizeof(mz_uint32)) && (new_size > 0x7FFFFFFF))) +#endif + return 0; + if (new_size > pState->m_mem_capacity) + { + void *pNew_block; + size_t new_capacity = MZ_MAX(64, pState->m_mem_capacity); while (new_capacity < new_size) new_capacity *= 2; + if (NULL == (pNew_block = pZip->m_pRealloc(pZip->m_pAlloc_opaque, pState->m_pMem, 1, new_capacity))) + return 0; + pState->m_pMem = pNew_block; pState->m_mem_capacity = new_capacity; + } + memcpy((mz_uint8 *)pState->m_pMem + file_ofs, pBuf, n); + pState->m_mem_size = (size_t)new_size; + return n; +} + +mz_bool mz_zip_writer_init_heap(mz_zip_archive *pZip, size_t size_to_reserve_at_beginning, size_t initial_allocation_size) +{ + pZip->m_pWrite = mz_zip_heap_write_func; + pZip->m_pIO_opaque = pZip; + if (!mz_zip_writer_init(pZip, size_to_reserve_at_beginning)) + return MZ_FALSE; + if (0 != (initial_allocation_size = MZ_MAX(initial_allocation_size, size_to_reserve_at_beginning))) + { + if (NULL == (pZip->m_pState->m_pMem = pZip->m_pAlloc(pZip->m_pAlloc_opaque, 1, initial_allocation_size))) + { + mz_zip_writer_end(pZip); + return MZ_FALSE; + } + pZip->m_pState->m_mem_capacity = initial_allocation_size; + } + return MZ_TRUE; +} + +#ifndef MINIZ_NO_STDIO +static size_t mz_zip_file_write_func(void *pOpaque, mz_uint64 file_ofs, const void *pBuf, size_t n) +{ + mz_zip_archive *pZip = (mz_zip_archive *)pOpaque; + mz_int64 cur_ofs = MZ_FTELL64(pZip->m_pState->m_pFile); + if (((mz_int64)file_ofs < 0) || (((cur_ofs != (mz_int64)file_ofs)) && (MZ_FSEEK64(pZip->m_pState->m_pFile, (mz_int64)file_ofs, SEEK_SET)))) + return 0; + return MZ_FWRITE(pBuf, 1, n, pZip->m_pState->m_pFile); +} + +mz_bool mz_zip_writer_init_file(mz_zip_archive *pZip, const char *pFilename, mz_uint64 size_to_reserve_at_beginning) +{ + MZ_FILE *pFile; + pZip->m_pWrite = mz_zip_file_write_func; + pZip->m_pIO_opaque = pZip; + if (!mz_zip_writer_init(pZip, size_to_reserve_at_beginning)) + return MZ_FALSE; + if (NULL == (pFile = MZ_FOPEN(pFilename, "wb"))) + { + mz_zip_writer_end(pZip); + return MZ_FALSE; + } + pZip->m_pState->m_pFile = pFile; + if (size_to_reserve_at_beginning) + { + mz_uint64 cur_ofs = 0; char buf[4096]; MZ_CLEAR_OBJ(buf); + do + { + size_t n = (size_t)MZ_MIN(sizeof(buf), size_to_reserve_at_beginning); + if (pZip->m_pWrite(pZip->m_pIO_opaque, cur_ofs, buf, n) != n) + { + mz_zip_writer_end(pZip); + return MZ_FALSE; + } + cur_ofs += n; size_to_reserve_at_beginning -= n; + } while (size_to_reserve_at_beginning); + } + return MZ_TRUE; +} +#endif // #ifndef MINIZ_NO_STDIO + +mz_bool mz_zip_writer_init_from_reader(mz_zip_archive *pZip, const char *pFilename) +{ + mz_zip_internal_state *pState; + if ((!pZip) || (!pZip->m_pState) || (pZip->m_zip_mode != MZ_ZIP_MODE_READING)) + return MZ_FALSE; + // No sense in trying to write to an archive that's already at the support max size + if ((pZip->m_total_files == 0xFFFF) || ((pZip->m_archive_size + MZ_ZIP_CENTRAL_DIR_HEADER_SIZE + MZ_ZIP_LOCAL_DIR_HEADER_SIZE) > 0xFFFFFFFF)) + return MZ_FALSE; + + pState = pZip->m_pState; + + if (pState->m_pFile) + { +#ifdef MINIZ_NO_STDIO + pFilename; return MZ_FALSE; +#else + // Archive is being read from stdio - try to reopen as writable. + if (pZip->m_pIO_opaque != pZip) + return MZ_FALSE; + if (!pFilename) + return MZ_FALSE; + pZip->m_pWrite = mz_zip_file_write_func; + if (NULL == (pState->m_pFile = MZ_FREOPEN(pFilename, "r+b", pState->m_pFile))) + { + // The mz_zip_archive is now in a bogus state because pState->m_pFile is NULL, so just close it. + mz_zip_reader_end(pZip); + return MZ_FALSE; + } +#endif // #ifdef MINIZ_NO_STDIO + } + else if (pState->m_pMem) + { + // Archive lives in a memory block. Assume it's from the heap that we can resize using the realloc callback. + if (pZip->m_pIO_opaque != pZip) + return MZ_FALSE; + pState->m_mem_capacity = pState->m_mem_size; + pZip->m_pWrite = mz_zip_heap_write_func; + } + // Archive is being read via a user provided read function - make sure the user has specified a write function too. + else if (!pZip->m_pWrite) + return MZ_FALSE; + + // Start writing new files at the archive's current central directory location. + pZip->m_archive_size = pZip->m_central_directory_file_ofs; + pZip->m_zip_mode = MZ_ZIP_MODE_WRITING; + pZip->m_central_directory_file_ofs = 0; + + return MZ_TRUE; +} + +mz_bool mz_zip_writer_add_mem(mz_zip_archive *pZip, const char *pArchive_name, const void *pBuf, size_t buf_size, mz_uint level_and_flags) +{ + return mz_zip_writer_add_mem_ex(pZip, pArchive_name, pBuf, buf_size, NULL, 0, level_and_flags, 0, 0); +} + +typedef struct +{ + mz_zip_archive *m_pZip; + mz_uint64 m_cur_archive_file_ofs; + mz_uint64 m_comp_size; +} mz_zip_writer_add_state; + +static mz_bool mz_zip_writer_add_put_buf_callback(const void* pBuf, int len, void *pUser) +{ + mz_zip_writer_add_state *pState = (mz_zip_writer_add_state *)pUser; + if ((int)pState->m_pZip->m_pWrite(pState->m_pZip->m_pIO_opaque, pState->m_cur_archive_file_ofs, pBuf, len) != len) + return MZ_FALSE; + pState->m_cur_archive_file_ofs += len; + pState->m_comp_size += len; + return MZ_TRUE; +} + +static mz_bool mz_zip_writer_create_local_dir_header(mz_zip_archive *pZip, mz_uint8 *pDst, mz_uint16 filename_size, mz_uint16 extra_size, mz_uint64 uncomp_size, mz_uint64 comp_size, mz_uint32 uncomp_crc32, mz_uint16 method, mz_uint16 bit_flags, mz_uint16 dos_time, mz_uint16 dos_date) +{ + (void)pZip; + memset(pDst, 0, MZ_ZIP_LOCAL_DIR_HEADER_SIZE); + MZ_WRITE_LE32(pDst + MZ_ZIP_LDH_SIG_OFS, MZ_ZIP_LOCAL_DIR_HEADER_SIG); + MZ_WRITE_LE16(pDst + MZ_ZIP_LDH_VERSION_NEEDED_OFS, method ? 20 : 0); + MZ_WRITE_LE16(pDst + MZ_ZIP_LDH_BIT_FLAG_OFS, bit_flags); + MZ_WRITE_LE16(pDst + MZ_ZIP_LDH_METHOD_OFS, method); + MZ_WRITE_LE16(pDst + MZ_ZIP_LDH_FILE_TIME_OFS, dos_time); + MZ_WRITE_LE16(pDst + MZ_ZIP_LDH_FILE_DATE_OFS, dos_date); + MZ_WRITE_LE32(pDst + MZ_ZIP_LDH_CRC32_OFS, uncomp_crc32); + MZ_WRITE_LE32(pDst + MZ_ZIP_LDH_COMPRESSED_SIZE_OFS, comp_size); + MZ_WRITE_LE32(pDst + MZ_ZIP_LDH_DECOMPRESSED_SIZE_OFS, uncomp_size); + MZ_WRITE_LE16(pDst + MZ_ZIP_LDH_FILENAME_LEN_OFS, filename_size); + MZ_WRITE_LE16(pDst + MZ_ZIP_LDH_EXTRA_LEN_OFS, extra_size); + return MZ_TRUE; +} + +static mz_bool mz_zip_writer_create_central_dir_header(mz_zip_archive *pZip, mz_uint8 *pDst, mz_uint16 filename_size, mz_uint16 extra_size, mz_uint16 comment_size, mz_uint64 uncomp_size, mz_uint64 comp_size, mz_uint32 uncomp_crc32, mz_uint16 method, mz_uint16 bit_flags, mz_uint16 dos_time, mz_uint16 dos_date, mz_uint64 local_header_ofs, mz_uint32 ext_attributes) +{ + (void)pZip; + memset(pDst, 0, MZ_ZIP_CENTRAL_DIR_HEADER_SIZE); + MZ_WRITE_LE32(pDst + MZ_ZIP_CDH_SIG_OFS, MZ_ZIP_CENTRAL_DIR_HEADER_SIG); + MZ_WRITE_LE16(pDst + MZ_ZIP_CDH_VERSION_NEEDED_OFS, method ? 20 : 0); + MZ_WRITE_LE16(pDst + MZ_ZIP_CDH_BIT_FLAG_OFS, bit_flags); + MZ_WRITE_LE16(pDst + MZ_ZIP_CDH_METHOD_OFS, method); + MZ_WRITE_LE16(pDst + MZ_ZIP_CDH_FILE_TIME_OFS, dos_time); + MZ_WRITE_LE16(pDst + MZ_ZIP_CDH_FILE_DATE_OFS, dos_date); + MZ_WRITE_LE32(pDst + MZ_ZIP_CDH_CRC32_OFS, uncomp_crc32); + MZ_WRITE_LE32(pDst + MZ_ZIP_CDH_COMPRESSED_SIZE_OFS, comp_size); + MZ_WRITE_LE32(pDst + MZ_ZIP_CDH_DECOMPRESSED_SIZE_OFS, uncomp_size); + MZ_WRITE_LE16(pDst + MZ_ZIP_CDH_FILENAME_LEN_OFS, filename_size); + MZ_WRITE_LE16(pDst + MZ_ZIP_CDH_EXTRA_LEN_OFS, extra_size); + MZ_WRITE_LE16(pDst + MZ_ZIP_CDH_COMMENT_LEN_OFS, comment_size); + MZ_WRITE_LE32(pDst + MZ_ZIP_CDH_EXTERNAL_ATTR_OFS, ext_attributes); + MZ_WRITE_LE32(pDst + MZ_ZIP_CDH_LOCAL_HEADER_OFS, local_header_ofs); + return MZ_TRUE; +} + +static mz_bool mz_zip_writer_add_to_central_dir(mz_zip_archive *pZip, const char *pFilename, mz_uint16 filename_size, const void *pExtra, mz_uint16 extra_size, const void *pComment, mz_uint16 comment_size, mz_uint64 uncomp_size, mz_uint64 comp_size, mz_uint32 uncomp_crc32, mz_uint16 method, mz_uint16 bit_flags, mz_uint16 dos_time, mz_uint16 dos_date, mz_uint64 local_header_ofs, mz_uint32 ext_attributes) +{ + mz_zip_internal_state *pState = pZip->m_pState; + mz_uint32 central_dir_ofs = (mz_uint32)pState->m_central_dir.m_size; + size_t orig_central_dir_size = pState->m_central_dir.m_size; + mz_uint8 central_dir_header[MZ_ZIP_CENTRAL_DIR_HEADER_SIZE]; + + // No zip64 support yet + if ((local_header_ofs > 0xFFFFFFFF) || (((mz_uint64)pState->m_central_dir.m_size + MZ_ZIP_CENTRAL_DIR_HEADER_SIZE + filename_size + extra_size + comment_size) > 0xFFFFFFFF)) + return MZ_FALSE; + + if (!mz_zip_writer_create_central_dir_header(pZip, central_dir_header, filename_size, extra_size, comment_size, uncomp_size, comp_size, uncomp_crc32, method, bit_flags, dos_time, dos_date, local_header_ofs, ext_attributes)) + return MZ_FALSE; + + if ((!mz_zip_array_push_back(pZip, &pState->m_central_dir, central_dir_header, MZ_ZIP_CENTRAL_DIR_HEADER_SIZE)) || + (!mz_zip_array_push_back(pZip, &pState->m_central_dir, pFilename, filename_size)) || + (!mz_zip_array_push_back(pZip, &pState->m_central_dir, pExtra, extra_size)) || + (!mz_zip_array_push_back(pZip, &pState->m_central_dir, pComment, comment_size)) || + (!mz_zip_array_push_back(pZip, &pState->m_central_dir_offsets, ¢ral_dir_ofs, 1))) + { + // Try to push the central directory array back into its original state. + mz_zip_array_resize(pZip, &pState->m_central_dir, orig_central_dir_size, MZ_FALSE); + return MZ_FALSE; + } + + return MZ_TRUE; +} + +static mz_bool mz_zip_writer_validate_archive_name(const char *pArchive_name) +{ + // Basic ZIP archive filename validity checks: Valid filenames cannot start with a forward slash, cannot contain a drive letter, and cannot use DOS-style backward slashes. + if (*pArchive_name == '/') + return MZ_FALSE; + while (*pArchive_name) + { + if ((*pArchive_name == '\\') || (*pArchive_name == ':')) + return MZ_FALSE; + pArchive_name++; + } + return MZ_TRUE; +} + +static mz_uint mz_zip_writer_compute_padding_needed_for_file_alignment(mz_zip_archive *pZip) +{ + mz_uint32 n; + if (!pZip->m_file_offset_alignment) + return 0; + n = (mz_uint32)(pZip->m_archive_size & (pZip->m_file_offset_alignment - 1)); + return (pZip->m_file_offset_alignment - n) & (pZip->m_file_offset_alignment - 1); +} + +static mz_bool mz_zip_writer_write_zeros(mz_zip_archive *pZip, mz_uint64 cur_file_ofs, mz_uint32 n) +{ + char buf[4096]; + memset(buf, 0, MZ_MIN(sizeof(buf), n)); + while (n) + { + mz_uint32 s = MZ_MIN(sizeof(buf), n); + if (pZip->m_pWrite(pZip->m_pIO_opaque, cur_file_ofs, buf, s) != s) + return MZ_FALSE; + cur_file_ofs += s; n -= s; + } + return MZ_TRUE; +} + +mz_bool mz_zip_writer_add_mem_ex(mz_zip_archive *pZip, const char *pArchive_name, const void *pBuf, size_t buf_size, const void *pComment, mz_uint16 comment_size, mz_uint level_and_flags, mz_uint64 uncomp_size, mz_uint32 uncomp_crc32) +{ + mz_uint16 method = 0, dos_time = 0, dos_date = 0; + mz_uint level, ext_attributes = 0, num_alignment_padding_bytes; + mz_uint64 local_dir_header_ofs = pZip->m_archive_size, cur_archive_file_ofs = pZip->m_archive_size, comp_size = 0; + size_t archive_name_size; + mz_uint8 local_dir_header[MZ_ZIP_LOCAL_DIR_HEADER_SIZE]; + tdefl_compressor *pComp = NULL; + mz_bool store_data_uncompressed; + mz_zip_internal_state *pState; + + if ((int)level_and_flags < 0) + level_and_flags = MZ_DEFAULT_LEVEL; + level = level_and_flags & 0xF; + store_data_uncompressed = ((!level) || (level_and_flags & MZ_ZIP_FLAG_COMPRESSED_DATA)); + + if ((!pZip) || (!pZip->m_pState) || (pZip->m_zip_mode != MZ_ZIP_MODE_WRITING) || ((buf_size) && (!pBuf)) || (!pArchive_name) || ((comment_size) && (!pComment)) || (pZip->m_total_files == 0xFFFF) || (level > MZ_UBER_COMPRESSION)) + return MZ_FALSE; + + pState = pZip->m_pState; + + if ((!(level_and_flags & MZ_ZIP_FLAG_COMPRESSED_DATA)) && (uncomp_size)) + return MZ_FALSE; + // No zip64 support yet + if ((buf_size > 0xFFFFFFFF) || (uncomp_size > 0xFFFFFFFF)) + return MZ_FALSE; + if (!mz_zip_writer_validate_archive_name(pArchive_name)) + return MZ_FALSE; + +#ifndef MINIZ_NO_TIME + { + time_t cur_time; time(&cur_time); + mz_zip_time_to_dos_time(cur_time, &dos_time, &dos_date); + } +#endif // #ifndef MINIZ_NO_TIME + + archive_name_size = strlen(pArchive_name); + if (archive_name_size > 0xFFFF) + return MZ_FALSE; + + num_alignment_padding_bytes = mz_zip_writer_compute_padding_needed_for_file_alignment(pZip); + + // no zip64 support yet + if ((pZip->m_total_files == 0xFFFF) || ((pZip->m_archive_size + num_alignment_padding_bytes + MZ_ZIP_LOCAL_DIR_HEADER_SIZE + MZ_ZIP_CENTRAL_DIR_HEADER_SIZE + comment_size + archive_name_size) > 0xFFFFFFFF)) + return MZ_FALSE; + + if ((archive_name_size) && (pArchive_name[archive_name_size - 1] == '/')) + { + // Set DOS Subdirectory attribute bit. + ext_attributes |= 0x10; + // Subdirectories cannot contain data. + if ((buf_size) || (uncomp_size)) + return MZ_FALSE; + } + + // Try to do any allocations before writing to the archive, so if an allocation fails the file remains unmodified. (A good idea if we're doing an in-place modification.) + if ((!mz_zip_array_ensure_room(pZip, &pState->m_central_dir, MZ_ZIP_CENTRAL_DIR_HEADER_SIZE + archive_name_size + comment_size)) || (!mz_zip_array_ensure_room(pZip, &pState->m_central_dir_offsets, 1))) + return MZ_FALSE; + + if ((!store_data_uncompressed) && (buf_size)) + { + if (NULL == (pComp = (tdefl_compressor *)pZip->m_pAlloc(pZip->m_pAlloc_opaque, 1, sizeof(tdefl_compressor)))) + return MZ_FALSE; + } + + if (!mz_zip_writer_write_zeros(pZip, cur_archive_file_ofs, num_alignment_padding_bytes + sizeof(local_dir_header))) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pComp); + return MZ_FALSE; + } + local_dir_header_ofs += num_alignment_padding_bytes; + if (pZip->m_file_offset_alignment) { MZ_ASSERT((local_dir_header_ofs & (pZip->m_file_offset_alignment - 1)) == 0); } + cur_archive_file_ofs += num_alignment_padding_bytes + sizeof(local_dir_header); + + MZ_CLEAR_OBJ(local_dir_header); + if (pZip->m_pWrite(pZip->m_pIO_opaque, cur_archive_file_ofs, pArchive_name, archive_name_size) != archive_name_size) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pComp); + return MZ_FALSE; + } + cur_archive_file_ofs += archive_name_size; + + if (!(level_and_flags & MZ_ZIP_FLAG_COMPRESSED_DATA)) + { + uncomp_crc32 = (mz_uint32)mz_crc32(MZ_CRC32_INIT, (const mz_uint8*)pBuf, buf_size); + uncomp_size = buf_size; + if (uncomp_size <= 3) + { + level = 0; + store_data_uncompressed = MZ_TRUE; + } + } + + if (store_data_uncompressed) + { + if (pZip->m_pWrite(pZip->m_pIO_opaque, cur_archive_file_ofs, pBuf, buf_size) != buf_size) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pComp); + return MZ_FALSE; + } + + cur_archive_file_ofs += buf_size; + comp_size = buf_size; + + if (level_and_flags & MZ_ZIP_FLAG_COMPRESSED_DATA) + method = MZ_DEFLATED; + } + else if (buf_size) + { + mz_zip_writer_add_state state; + + state.m_pZip = pZip; + state.m_cur_archive_file_ofs = cur_archive_file_ofs; + state.m_comp_size = 0; + + if ((tdefl_init(pComp, mz_zip_writer_add_put_buf_callback, &state, tdefl_create_comp_flags_from_zip_params(level, -15, MZ_DEFAULT_STRATEGY)) != TDEFL_STATUS_OKAY) || + (tdefl_compress_buffer(pComp, pBuf, buf_size, TDEFL_FINISH) != TDEFL_STATUS_DONE)) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pComp); + return MZ_FALSE; + } + + comp_size = state.m_comp_size; + cur_archive_file_ofs = state.m_cur_archive_file_ofs; + + method = MZ_DEFLATED; + } + + pZip->m_pFree(pZip->m_pAlloc_opaque, pComp); + pComp = NULL; + + // no zip64 support yet + if ((comp_size > 0xFFFFFFFF) || (cur_archive_file_ofs > 0xFFFFFFFF)) + return MZ_FALSE; + + if (!mz_zip_writer_create_local_dir_header(pZip, local_dir_header, (mz_uint16)archive_name_size, 0, uncomp_size, comp_size, uncomp_crc32, method, 0, dos_time, dos_date)) + return MZ_FALSE; + + if (pZip->m_pWrite(pZip->m_pIO_opaque, local_dir_header_ofs, local_dir_header, sizeof(local_dir_header)) != sizeof(local_dir_header)) + return MZ_FALSE; + + if (!mz_zip_writer_add_to_central_dir(pZip, pArchive_name, (mz_uint16)archive_name_size, NULL, 0, pComment, comment_size, uncomp_size, comp_size, uncomp_crc32, method, 0, dos_time, dos_date, local_dir_header_ofs, ext_attributes)) + return MZ_FALSE; + + pZip->m_total_files++; + pZip->m_archive_size = cur_archive_file_ofs; + + return MZ_TRUE; +} + +#ifndef MINIZ_NO_STDIO +mz_bool mz_zip_writer_add_file(mz_zip_archive *pZip, const char *pArchive_name, const char *pSrc_filename, const void *pComment, mz_uint16 comment_size, mz_uint level_and_flags) +{ + mz_uint uncomp_crc32 = MZ_CRC32_INIT, level, num_alignment_padding_bytes; + mz_uint16 method = 0, dos_time = 0, dos_date = 0, ext_attributes = 0; + mz_uint64 local_dir_header_ofs = pZip->m_archive_size, cur_archive_file_ofs = pZip->m_archive_size, uncomp_size = 0, comp_size = 0; + size_t archive_name_size; + mz_uint8 local_dir_header[MZ_ZIP_LOCAL_DIR_HEADER_SIZE]; + MZ_FILE *pSrc_file = NULL; + + if ((int)level_and_flags < 0) + level_and_flags = MZ_DEFAULT_LEVEL; + level = level_and_flags & 0xF; + + if ((!pZip) || (!pZip->m_pState) || (pZip->m_zip_mode != MZ_ZIP_MODE_WRITING) || (!pArchive_name) || ((comment_size) && (!pComment)) || (level > MZ_UBER_COMPRESSION)) + return MZ_FALSE; + if (level_and_flags & MZ_ZIP_FLAG_COMPRESSED_DATA) + return MZ_FALSE; + if (!mz_zip_writer_validate_archive_name(pArchive_name)) + return MZ_FALSE; + + archive_name_size = strlen(pArchive_name); + if (archive_name_size > 0xFFFF) + return MZ_FALSE; + + num_alignment_padding_bytes = mz_zip_writer_compute_padding_needed_for_file_alignment(pZip); + + // no zip64 support yet + if ((pZip->m_total_files == 0xFFFF) || ((pZip->m_archive_size + num_alignment_padding_bytes + MZ_ZIP_LOCAL_DIR_HEADER_SIZE + MZ_ZIP_CENTRAL_DIR_HEADER_SIZE + comment_size + archive_name_size) > 0xFFFFFFFF)) + return MZ_FALSE; + + if (!mz_zip_get_file_modified_time(pSrc_filename, &dos_time, &dos_date)) + return MZ_FALSE; + + pSrc_file = MZ_FOPEN(pSrc_filename, "rb"); + if (!pSrc_file) + return MZ_FALSE; + MZ_FSEEK64(pSrc_file, 0, SEEK_END); + uncomp_size = MZ_FTELL64(pSrc_file); + MZ_FSEEK64(pSrc_file, 0, SEEK_SET); + + if (uncomp_size > 0xFFFFFFFF) + { + // No zip64 support yet + MZ_FCLOSE(pSrc_file); + return MZ_FALSE; + } + if (uncomp_size <= 3) + level = 0; + + if (!mz_zip_writer_write_zeros(pZip, cur_archive_file_ofs, num_alignment_padding_bytes + sizeof(local_dir_header))) + return MZ_FALSE; + local_dir_header_ofs += num_alignment_padding_bytes; + if (pZip->m_file_offset_alignment) { MZ_ASSERT((local_dir_header_ofs & (pZip->m_file_offset_alignment - 1)) == 0); } + cur_archive_file_ofs += num_alignment_padding_bytes + sizeof(local_dir_header); + + MZ_CLEAR_OBJ(local_dir_header); + if (pZip->m_pWrite(pZip->m_pIO_opaque, cur_archive_file_ofs, pArchive_name, archive_name_size) != archive_name_size) + { + MZ_FCLOSE(pSrc_file); + return MZ_FALSE; + } + cur_archive_file_ofs += archive_name_size; + + if (uncomp_size) + { + mz_uint64 uncomp_remaining = uncomp_size; + void *pRead_buf = pZip->m_pAlloc(pZip->m_pAlloc_opaque, 1, MZ_ZIP_MAX_IO_BUF_SIZE); + if (!pRead_buf) + { + MZ_FCLOSE(pSrc_file); + return MZ_FALSE; + } + + if (!level) + { + while (uncomp_remaining) + { + mz_uint n = (mz_uint)MZ_MIN(MZ_ZIP_MAX_IO_BUF_SIZE, uncomp_remaining); + if ((MZ_FREAD(pRead_buf, 1, n, pSrc_file) != n) || (pZip->m_pWrite(pZip->m_pIO_opaque, cur_archive_file_ofs, pRead_buf, n) != n)) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pRead_buf); + MZ_FCLOSE(pSrc_file); + return MZ_FALSE; + } + uncomp_crc32 = (mz_uint32)mz_crc32(uncomp_crc32, (const mz_uint8 *)pRead_buf, n); + uncomp_remaining -= n; + cur_archive_file_ofs += n; + } + comp_size = uncomp_size; + } + else + { + mz_bool result = MZ_FALSE; + mz_zip_writer_add_state state; + tdefl_compressor *pComp = (tdefl_compressor *)pZip->m_pAlloc(pZip->m_pAlloc_opaque, 1, sizeof(tdefl_compressor)); + if (!pComp) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pRead_buf); + MZ_FCLOSE(pSrc_file); + return MZ_FALSE; + } + + state.m_pZip = pZip; + state.m_cur_archive_file_ofs = cur_archive_file_ofs; + state.m_comp_size = 0; + + if (tdefl_init(pComp, mz_zip_writer_add_put_buf_callback, &state, tdefl_create_comp_flags_from_zip_params(level, -15, MZ_DEFAULT_STRATEGY)) != TDEFL_STATUS_OKAY) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pComp); + pZip->m_pFree(pZip->m_pAlloc_opaque, pRead_buf); + MZ_FCLOSE(pSrc_file); + return MZ_FALSE; + } + + for ( ; ; ) + { + size_t in_buf_size = (mz_uint32)MZ_MIN(uncomp_remaining, MZ_ZIP_MAX_IO_BUF_SIZE); + tdefl_status status; + + if (MZ_FREAD(pRead_buf, 1, in_buf_size, pSrc_file) != in_buf_size) + break; + + uncomp_crc32 = (mz_uint32)mz_crc32(uncomp_crc32, (const mz_uint8 *)pRead_buf, in_buf_size); + uncomp_remaining -= in_buf_size; + + status = tdefl_compress_buffer(pComp, pRead_buf, in_buf_size, uncomp_remaining ? TDEFL_NO_FLUSH : TDEFL_FINISH); + if (status == TDEFL_STATUS_DONE) + { + result = MZ_TRUE; + break; + } + else if (status != TDEFL_STATUS_OKAY) + break; + } + + pZip->m_pFree(pZip->m_pAlloc_opaque, pComp); + + if (!result) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pRead_buf); + MZ_FCLOSE(pSrc_file); + return MZ_FALSE; + } + + comp_size = state.m_comp_size; + cur_archive_file_ofs = state.m_cur_archive_file_ofs; + + method = MZ_DEFLATED; + } + + pZip->m_pFree(pZip->m_pAlloc_opaque, pRead_buf); + } + + MZ_FCLOSE(pSrc_file); pSrc_file = NULL; + + // no zip64 support yet + if ((comp_size > 0xFFFFFFFF) || (cur_archive_file_ofs > 0xFFFFFFFF)) + return MZ_FALSE; + + if (!mz_zip_writer_create_local_dir_header(pZip, local_dir_header, (mz_uint16)archive_name_size, 0, uncomp_size, comp_size, uncomp_crc32, method, 0, dos_time, dos_date)) + return MZ_FALSE; + + if (pZip->m_pWrite(pZip->m_pIO_opaque, local_dir_header_ofs, local_dir_header, sizeof(local_dir_header)) != sizeof(local_dir_header)) + return MZ_FALSE; + + if (!mz_zip_writer_add_to_central_dir(pZip, pArchive_name, (mz_uint16)archive_name_size, NULL, 0, pComment, comment_size, uncomp_size, comp_size, uncomp_crc32, method, 0, dos_time, dos_date, local_dir_header_ofs, ext_attributes)) + return MZ_FALSE; + + pZip->m_total_files++; + pZip->m_archive_size = cur_archive_file_ofs; + + return MZ_TRUE; +} +#endif // #ifndef MINIZ_NO_STDIO + +mz_bool mz_zip_writer_add_from_zip_reader(mz_zip_archive *pZip, mz_zip_archive *pSource_zip, mz_uint file_index) +{ + mz_uint n, bit_flags, num_alignment_padding_bytes; + mz_uint64 comp_bytes_remaining, local_dir_header_ofs; + mz_uint64 cur_src_file_ofs, cur_dst_file_ofs; + mz_uint32 local_header_u32[(MZ_ZIP_LOCAL_DIR_HEADER_SIZE + sizeof(mz_uint32) - 1) / sizeof(mz_uint32)]; mz_uint8 *pLocal_header = (mz_uint8 *)local_header_u32; + mz_uint8 central_header[MZ_ZIP_CENTRAL_DIR_HEADER_SIZE]; + size_t orig_central_dir_size; + mz_zip_internal_state *pState; + void *pBuf; const mz_uint8 *pSrc_central_header; + + if ((!pZip) || (!pZip->m_pState) || (pZip->m_zip_mode != MZ_ZIP_MODE_WRITING)) + return MZ_FALSE; + if (NULL == (pSrc_central_header = mz_zip_reader_get_cdh(pSource_zip, file_index))) + return MZ_FALSE; + pState = pZip->m_pState; + + num_alignment_padding_bytes = mz_zip_writer_compute_padding_needed_for_file_alignment(pZip); + + // no zip64 support yet + if ((pZip->m_total_files == 0xFFFF) || ((pZip->m_archive_size + num_alignment_padding_bytes + MZ_ZIP_LOCAL_DIR_HEADER_SIZE + MZ_ZIP_CENTRAL_DIR_HEADER_SIZE) > 0xFFFFFFFF)) + return MZ_FALSE; + + cur_src_file_ofs = MZ_READ_LE32(pSrc_central_header + MZ_ZIP_CDH_LOCAL_HEADER_OFS); + cur_dst_file_ofs = pZip->m_archive_size; + + if (pSource_zip->m_pRead(pSource_zip->m_pIO_opaque, cur_src_file_ofs, pLocal_header, MZ_ZIP_LOCAL_DIR_HEADER_SIZE) != MZ_ZIP_LOCAL_DIR_HEADER_SIZE) + return MZ_FALSE; + if (MZ_READ_LE32(pLocal_header) != MZ_ZIP_LOCAL_DIR_HEADER_SIG) + return MZ_FALSE; + cur_src_file_ofs += MZ_ZIP_LOCAL_DIR_HEADER_SIZE; + + if (!mz_zip_writer_write_zeros(pZip, cur_dst_file_ofs, num_alignment_padding_bytes)) + return MZ_FALSE; + cur_dst_file_ofs += num_alignment_padding_bytes; + local_dir_header_ofs = cur_dst_file_ofs; + if (pZip->m_file_offset_alignment) { MZ_ASSERT((local_dir_header_ofs & (pZip->m_file_offset_alignment - 1)) == 0); } + + if (pZip->m_pWrite(pZip->m_pIO_opaque, cur_dst_file_ofs, pLocal_header, MZ_ZIP_LOCAL_DIR_HEADER_SIZE) != MZ_ZIP_LOCAL_DIR_HEADER_SIZE) + return MZ_FALSE; + cur_dst_file_ofs += MZ_ZIP_LOCAL_DIR_HEADER_SIZE; + + n = MZ_READ_LE16(pLocal_header + MZ_ZIP_LDH_FILENAME_LEN_OFS) + MZ_READ_LE16(pLocal_header + MZ_ZIP_LDH_EXTRA_LEN_OFS); + comp_bytes_remaining = n + MZ_READ_LE32(pSrc_central_header + MZ_ZIP_CDH_COMPRESSED_SIZE_OFS); + + if (NULL == (pBuf = pZip->m_pAlloc(pZip->m_pAlloc_opaque, 1, (size_t)MZ_MAX(sizeof(mz_uint32) * 4, MZ_MIN(MZ_ZIP_MAX_IO_BUF_SIZE, comp_bytes_remaining))))) + return MZ_FALSE; + + while (comp_bytes_remaining) + { + n = (mz_uint)MZ_MIN(MZ_ZIP_MAX_IO_BUF_SIZE, comp_bytes_remaining); + if (pSource_zip->m_pRead(pSource_zip->m_pIO_opaque, cur_src_file_ofs, pBuf, n) != n) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pBuf); + return MZ_FALSE; + } + cur_src_file_ofs += n; + + if (pZip->m_pWrite(pZip->m_pIO_opaque, cur_dst_file_ofs, pBuf, n) != n) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pBuf); + return MZ_FALSE; + } + cur_dst_file_ofs += n; + + comp_bytes_remaining -= n; + } + + bit_flags = MZ_READ_LE16(pLocal_header + MZ_ZIP_LDH_BIT_FLAG_OFS); + if (bit_flags & 8) + { + // Copy data descriptor + if (pSource_zip->m_pRead(pSource_zip->m_pIO_opaque, cur_src_file_ofs, pBuf, sizeof(mz_uint32) * 4) != sizeof(mz_uint32) * 4) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pBuf); + return MZ_FALSE; + } + + n = sizeof(mz_uint32) * ((MZ_READ_LE32(pBuf) == 0x08074b50) ? 4 : 3); + if (pZip->m_pWrite(pZip->m_pIO_opaque, cur_dst_file_ofs, pBuf, n) != n) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pBuf); + return MZ_FALSE; + } + + cur_src_file_ofs += n; + cur_dst_file_ofs += n; + } + pZip->m_pFree(pZip->m_pAlloc_opaque, pBuf); + + // no zip64 support yet + if (cur_dst_file_ofs > 0xFFFFFFFF) + return MZ_FALSE; + + orig_central_dir_size = pState->m_central_dir.m_size; + + memcpy(central_header, pSrc_central_header, MZ_ZIP_CENTRAL_DIR_HEADER_SIZE); + MZ_WRITE_LE32(central_header + MZ_ZIP_CDH_LOCAL_HEADER_OFS, local_dir_header_ofs); + if (!mz_zip_array_push_back(pZip, &pState->m_central_dir, central_header, MZ_ZIP_CENTRAL_DIR_HEADER_SIZE)) + return MZ_FALSE; + + n = MZ_READ_LE16(pSrc_central_header + MZ_ZIP_CDH_FILENAME_LEN_OFS) + MZ_READ_LE16(pSrc_central_header + MZ_ZIP_CDH_EXTRA_LEN_OFS) + MZ_READ_LE16(pSrc_central_header + MZ_ZIP_CDH_COMMENT_LEN_OFS); + if (!mz_zip_array_push_back(pZip, &pState->m_central_dir, pSrc_central_header + MZ_ZIP_CENTRAL_DIR_HEADER_SIZE, n)) + { + mz_zip_array_resize(pZip, &pState->m_central_dir, orig_central_dir_size, MZ_FALSE); + return MZ_FALSE; + } + + if (pState->m_central_dir.m_size > 0xFFFFFFFF) + return MZ_FALSE; + n = (mz_uint32)pState->m_central_dir.m_size; + if (!mz_zip_array_push_back(pZip, &pState->m_central_dir_offsets, &n, 1)) + { + mz_zip_array_resize(pZip, &pState->m_central_dir, orig_central_dir_size, MZ_FALSE); + return MZ_FALSE; + } + + pZip->m_total_files++; + pZip->m_archive_size = cur_dst_file_ofs; + + return MZ_TRUE; +} + +mz_bool mz_zip_writer_finalize_archive(mz_zip_archive *pZip) +{ + mz_zip_internal_state *pState; + mz_uint64 central_dir_ofs, central_dir_size; + mz_uint8 hdr[MZ_ZIP_END_OF_CENTRAL_DIR_HEADER_SIZE]; + + if ((!pZip) || (!pZip->m_pState) || (pZip->m_zip_mode != MZ_ZIP_MODE_WRITING)) + return MZ_FALSE; + + pState = pZip->m_pState; + + // no zip64 support yet + if ((pZip->m_total_files > 0xFFFF) || ((pZip->m_archive_size + pState->m_central_dir.m_size + MZ_ZIP_END_OF_CENTRAL_DIR_HEADER_SIZE) > 0xFFFFFFFF)) + return MZ_FALSE; + + central_dir_ofs = 0; + central_dir_size = 0; + if (pZip->m_total_files) + { + // Write central directory + central_dir_ofs = pZip->m_archive_size; + central_dir_size = pState->m_central_dir.m_size; + pZip->m_central_directory_file_ofs = central_dir_ofs; + if (pZip->m_pWrite(pZip->m_pIO_opaque, central_dir_ofs, pState->m_central_dir.m_p, (size_t)central_dir_size) != central_dir_size) + return MZ_FALSE; + pZip->m_archive_size += central_dir_size; + } + + // Write end of central directory record + MZ_CLEAR_OBJ(hdr); + MZ_WRITE_LE32(hdr + MZ_ZIP_ECDH_SIG_OFS, MZ_ZIP_END_OF_CENTRAL_DIR_HEADER_SIG); + MZ_WRITE_LE16(hdr + MZ_ZIP_ECDH_CDIR_NUM_ENTRIES_ON_DISK_OFS, pZip->m_total_files); + MZ_WRITE_LE16(hdr + MZ_ZIP_ECDH_CDIR_TOTAL_ENTRIES_OFS, pZip->m_total_files); + MZ_WRITE_LE32(hdr + MZ_ZIP_ECDH_CDIR_SIZE_OFS, central_dir_size); + MZ_WRITE_LE32(hdr + MZ_ZIP_ECDH_CDIR_OFS_OFS, central_dir_ofs); + + if (pZip->m_pWrite(pZip->m_pIO_opaque, pZip->m_archive_size, hdr, sizeof(hdr)) != sizeof(hdr)) + return MZ_FALSE; +#ifndef MINIZ_NO_STDIO + if ((pState->m_pFile) && (MZ_FFLUSH(pState->m_pFile) == EOF)) + return MZ_FALSE; +#endif // #ifndef MINIZ_NO_STDIO + + pZip->m_archive_size += sizeof(hdr); + + pZip->m_zip_mode = MZ_ZIP_MODE_WRITING_HAS_BEEN_FINALIZED; + return MZ_TRUE; +} + +mz_bool mz_zip_writer_finalize_heap_archive(mz_zip_archive *pZip, void **pBuf, size_t *pSize) +{ + if ((!pZip) || (!pZip->m_pState) || (!pBuf) || (!pSize)) + return MZ_FALSE; + if (pZip->m_pWrite != mz_zip_heap_write_func) + return MZ_FALSE; + if (!mz_zip_writer_finalize_archive(pZip)) + return MZ_FALSE; + + *pBuf = pZip->m_pState->m_pMem; + *pSize = pZip->m_pState->m_mem_size; + pZip->m_pState->m_pMem = NULL; + pZip->m_pState->m_mem_size = pZip->m_pState->m_mem_capacity = 0; + return MZ_TRUE; +} + +mz_bool mz_zip_writer_end(mz_zip_archive *pZip) +{ + mz_zip_internal_state *pState; + mz_bool status = MZ_TRUE; + if ((!pZip) || (!pZip->m_pState) || (!pZip->m_pAlloc) || (!pZip->m_pFree) || ((pZip->m_zip_mode != MZ_ZIP_MODE_WRITING) && (pZip->m_zip_mode != MZ_ZIP_MODE_WRITING_HAS_BEEN_FINALIZED))) + return MZ_FALSE; + + pState = pZip->m_pState; + pZip->m_pState = NULL; + mz_zip_array_clear(pZip, &pState->m_central_dir); + mz_zip_array_clear(pZip, &pState->m_central_dir_offsets); + mz_zip_array_clear(pZip, &pState->m_sorted_central_dir_offsets); + +#ifndef MINIZ_NO_STDIO + if (pState->m_pFile) + { + MZ_FCLOSE(pState->m_pFile); + pState->m_pFile = NULL; + } +#endif // #ifndef MINIZ_NO_STDIO + + if ((pZip->m_pWrite == mz_zip_heap_write_func) && (pState->m_pMem)) + { + pZip->m_pFree(pZip->m_pAlloc_opaque, pState->m_pMem); + pState->m_pMem = NULL; + } + + pZip->m_pFree(pZip->m_pAlloc_opaque, pState); + pZip->m_zip_mode = MZ_ZIP_MODE_INVALID; + return status; +} + +#ifndef MINIZ_NO_STDIO +mz_bool mz_zip_add_mem_to_archive_file_in_place(const char *pZip_filename, const char *pArchive_name, const void *pBuf, size_t buf_size, const void *pComment, mz_uint16 comment_size, mz_uint level_and_flags) +{ + mz_bool status, created_new_archive = MZ_FALSE; + mz_zip_archive zip_archive; + struct MZ_FILE_STAT_STRUCT file_stat; + MZ_CLEAR_OBJ(zip_archive); + if ((int)level_and_flags < 0) + level_and_flags = MZ_DEFAULT_LEVEL; + if ((!pZip_filename) || (!pArchive_name) || ((buf_size) && (!pBuf)) || ((comment_size) && (!pComment)) || ((level_and_flags & 0xF) > MZ_UBER_COMPRESSION)) + return MZ_FALSE; + if (!mz_zip_writer_validate_archive_name(pArchive_name)) + return MZ_FALSE; + if (MZ_FILE_STAT(pZip_filename, &file_stat) != 0) + { + // Create a new archive. + if (!mz_zip_writer_init_file(&zip_archive, pZip_filename, 0)) + return MZ_FALSE; + created_new_archive = MZ_TRUE; + } + else + { + // Append to an existing archive. + if (!mz_zip_reader_init_file(&zip_archive, pZip_filename, level_and_flags | MZ_ZIP_FLAG_DO_NOT_SORT_CENTRAL_DIRECTORY)) + return MZ_FALSE; + if (!mz_zip_writer_init_from_reader(&zip_archive, pZip_filename)) + { + mz_zip_reader_end(&zip_archive); + return MZ_FALSE; + } + } + status = mz_zip_writer_add_mem_ex(&zip_archive, pArchive_name, pBuf, buf_size, pComment, comment_size, level_and_flags, 0, 0); + // Always finalize, even if adding failed for some reason, so we have a valid central directory. (This may not always succeed, but we can try.) + if (!mz_zip_writer_finalize_archive(&zip_archive)) + status = MZ_FALSE; + if (!mz_zip_writer_end(&zip_archive)) + status = MZ_FALSE; + if ((!status) && (created_new_archive)) + { + // It's a new archive and something went wrong, so just delete it. + int ignoredStatus = MZ_DELETE_FILE(pZip_filename); + (void)ignoredStatus; + } + return status; +} + +void *mz_zip_extract_archive_file_to_heap(const char *pZip_filename, const char *pArchive_name, size_t *pSize, mz_uint flags) +{ + int file_index; + mz_zip_archive zip_archive; + void *p = NULL; + + if (pSize) + *pSize = 0; + + if ((!pZip_filename) || (!pArchive_name)) + return NULL; + + MZ_CLEAR_OBJ(zip_archive); + if (!mz_zip_reader_init_file(&zip_archive, pZip_filename, flags | MZ_ZIP_FLAG_DO_NOT_SORT_CENTRAL_DIRECTORY)) + return NULL; + + if ((file_index = mz_zip_reader_locate_file(&zip_archive, pArchive_name, NULL, flags)) >= 0) + p = mz_zip_reader_extract_to_heap(&zip_archive, file_index, pSize, flags); + + mz_zip_reader_end(&zip_archive); + return p; +} + +#endif // #ifndef MINIZ_NO_STDIO + +#endif // #ifndef MINIZ_NO_ARCHIVE_WRITING_APIS + +#endif // #ifndef MINIZ_NO_ARCHIVE_APIS + +#ifdef __cplusplus +} +#endif + +#endif // MINIZ_HEADER_FILE_ONLY + +/* + This is free and unencumbered software released into the public domain. + + Anyone is free to copy, modify, publish, use, compile, sell, or + distribute this software, either in source code form or as a compiled + binary, for any purpose, commercial or non-commercial, and by any + means. + + In jurisdictions that recognize copyright laws, the author or authors + of this software dedicate any and all copyright interest in the + software to the public domain. We make this dedication for the benefit + of the public at large and to the detriment of our heirs and + successors. We intend this dedication to be an overt act of + relinquishment in perpetuity of all present and future rights to this + software under copyright law. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR + OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + OTHER DEALINGS IN THE SOFTWARE. + + For more information, please refer to +*/ diff --git a/src/SDL2/missing b/src/SDL2/missing new file mode 100755 index 000000000..cdea51493 --- /dev/null +++ b/src/SDL2/missing @@ -0,0 +1,215 @@ +#! /bin/sh +# Common wrapper for a few potentially missing GNU programs. + +scriptversion=2012-06-26.16; # UTC + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try '$0 --help' for more information" + exit 1 +fi + +case $1 in + + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; + + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + +Supported PROGRAM values: + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man + +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" + exit 1 + ;; + +esac + +# Run the given program, remember its exit status. +"$@"; st=$? + +# If it succeeded, we are done. +test $st -eq 0 && exit 0 + +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi + +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'automa4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/src/SDL2/showimage.c b/src/SDL2/showimage.c new file mode 100644 index 000000000..9d5e73cbf --- /dev/null +++ b/src/SDL2/showimage.c @@ -0,0 +1,175 @@ +/* + showimage: A test application for the SDL image loading library. + Copyright (C) 1997-2013 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#include +#include +#include + +#include "SDL.h" +#include "SDL_image.h" + + +/* Draw a Gimpish background pattern to show transparency in the image */ +static void draw_background(SDL_Renderer *renderer, int w, int h) +{ + SDL_Color col[2] = { + { 0x66, 0x66, 0x66, 0xff }, + { 0x99, 0x99, 0x99, 0xff }, + }; + int i, x, y; + SDL_Rect rect; + + rect.w = 8; + rect.h = 8; + for (y = 0; y < h; y += rect.h) { + for (x = 0; x < w; x += rect.w) { + /* use an 8x8 checkerboard pattern */ + i = (((x ^ y) >> 3) & 1); + SDL_SetRenderDrawColor(renderer, col[i].r, col[i].g, col[i].b, col[i].a); + + rect.x = x; + rect.y = y; + SDL_RenderFillRect(renderer, &rect); + } + } +} + +int main(int argc, char *argv[]) +{ + SDL_Window *window; + SDL_Renderer *renderer; + SDL_Texture *texture; + Uint32 flags; + int i, w, h, done; + SDL_Event event; + const char *saveFile = NULL; + + /* Check command line usage */ + if ( ! argv[1] ) { + fprintf(stderr, "Usage: %s [-fullscreen] [-save file.png] ...\n", argv[0]); + return(1); + } + + flags = SDL_WINDOW_HIDDEN; + for ( i=1; argv[i]; ++i ) { + if ( strcmp(argv[i], "-fullscreen") == 0 ) { + SDL_ShowCursor(0); + flags |= SDL_WINDOW_FULLSCREEN; + } + } + + if (SDL_CreateWindowAndRenderer(0, 0, flags, &window, &renderer) < 0) { + fprintf(stderr, "SDL_CreateWindowAndRenderer() failed: %s\n", SDL_GetError()); + return(2); + } + + for ( i=1; argv[i]; ++i ) { + if ( strcmp(argv[i], "-fullscreen") == 0 ) { + continue; + } + + if ( strcmp(argv[i], "-save") == 0 && argv[i+1] ) { + ++i; + saveFile = argv[i]; + continue; + } + + /* Open the image file */ + texture = IMG_LoadTexture(renderer, argv[i]); + if (!texture) { + fprintf(stderr, "Couldn't load %s: %s\n", argv[i], SDL_GetError()); + continue; + } + SDL_QueryTexture(texture, NULL, NULL, &w, &h); + + /* Save the image file, if desired */ + if ( saveFile ) { + SDL_Surface *surface = IMG_Load(argv[i]); + if (surface) { + if ( IMG_SavePNG(surface, saveFile) < 0 ) { + fprintf(stderr, "Couldn't save %s: %s\n", saveFile, SDL_GetError()); + } + } else { + fprintf(stderr, "Couldn't load %s: %s\n", argv[i], SDL_GetError()); + } + } + + /* Show the window */ + SDL_SetWindowTitle(window, argv[i]); + SDL_SetWindowSize(window, w, h); + SDL_ShowWindow(window); + + done = 0; + while ( ! done ) { + while ( SDL_PollEvent(&event) ) { + switch (event.type) { + case SDL_KEYUP: + switch (event.key.keysym.sym) { + case SDLK_LEFT: + if ( i > 1 ) { + i -= 2; + done = 1; + } + break; + case SDLK_RIGHT: + if ( argv[i+1] ) { + done = 1; + } + break; + case SDLK_ESCAPE: + case SDLK_q: + argv[i+1] = NULL; + /* Drop through to done */ + case SDLK_SPACE: + case SDLK_TAB: + done = 1; + break; + default: + break; + } + break; + case SDL_MOUSEBUTTONDOWN: + done = 1; + break; + case SDL_QUIT: + argv[i+1] = NULL; + done = 1; + break; + default: + break; + } + } + /* Draw a background pattern in case the image has transparency */ + draw_background(renderer, w, h); + + /* Display the image */ + SDL_RenderCopy(renderer, texture, NULL, NULL); + SDL_RenderPresent(renderer); + + SDL_Delay(100); + } + SDL_DestroyTexture(texture); + } + + /* We're done! */ + SDL_Quit(); + return(0); +} diff --git a/src/SDL2/version.rc b/src/SDL2/version.rc new file mode 100644 index 000000000..981881480 --- /dev/null +++ b/src/SDL2/version.rc @@ -0,0 +1,38 @@ + +#include "winresrc.h" + +LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US + +///////////////////////////////////////////////////////////////////////////// +// +// Version +// + +VS_VERSION_INFO VERSIONINFO + FILEVERSION 2,0,0,0 + PRODUCTVERSION 2,0,0,0 + FILEFLAGSMASK 0x3fL + FILEFLAGS 0x0L + FILEOS 0x40004L + FILETYPE 0x2L + FILESUBTYPE 0x0L +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904b0" + BEGIN + VALUE "CompanyName", "\0" + VALUE "FileDescription", "SDL_image\0" + VALUE "FileVersion", "2, 0, 0, 0\0" + VALUE "InternalName", "SDL_image\0" + VALUE "LegalCopyright", "Copyright © 2013 Sam Lantinga\0" + VALUE "OriginalFilename", "SDL_image.dll\0" + VALUE "ProductName", "Simple DirectMedia Layer\0" + VALUE "ProductVersion", "2, 0, 0, 0\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x409, 1200 + END +END -- 2.11.0

    ?)Y{B-);7xC{S;@^jkRQ*%K4IhdUU-)`mWgl4S)KoH)Gv{yyi(_g;AZS*Up-Qa6j#e37D5D1UG&$q-8OPbE1*NydpVXLBoUX(ek(P_nvL zyLw!|cGA3l_Hpe(NH=zLK6ZRHD*CT! z$?s#wiq|Xs<*$Rio?-FtiG)EadB&Zw;mteF$}+GiO3iPq*6!l((`3O5}{m8Idz4M*}9BXoATmn~cebj1VFz z=NyQ}c6ZMS_uO+&)vJ2{!TaI+s(#+JCD~OfFRk^hZ++hm54XYF*#2<8L}wfXgl>C0 zJNAw^af=bUMT^|Qi4(fToVmtbxUz+AY@ruh;2JMv#S2&oB31&pIb*~N=3uRVpTqGuue4f zRx~>;nwys_u1Xd-lKBnk!m?~}O}?-qUtCr!EGy=hWV18U*%8URUeUxW`MZXbo~r5U z-2JW+&2Xi8qTKqv%DPx#7%I?p6l%K)4TD9-;WE=$xpBNyKU$<6D$>5mRkh_RsxqZ{ zsgmSmVRXVt0GpSTa?(+8G5O}~-O$O@*v#zY_`>Y;{QT6y{M7vW>4nwV`Sk^G7S`q$ zIrB@0i>rd=b;bIY^hI!d7Sp@pWm?~S*YND%>N9_u~6GPU(-Dgt_^SIYTk@g_NJ!wyF?B9#E%CjkB27Ly2m{aX6KgWhJS&VzH#7GKxP?)v2)MirkH6u)p( zzwN1h-BNyDSA2S}_&lrlG_CkFA^SKay=xL)=AWx$_s&BGHlDTZMUGu0U0miHuM?C@ zUc6k=razMF3+DwO&qC1`kr+uLUYbLcm6H|K6nQ08QspG9rkqqzdHLjnB{8I%Q1>cSVyQQNl(dmqwvKcsHnr*S@IAAHK^ ze#$@moOkd!Z}qt{(wq6E@u6p5?3(LxMHPJmn*|cmhfgzaLrZ!r)=_VN~-VA$*d>M<35LX zZx7A0)AGDYL43`OcPlS`QkXx?%^u#0U6^MtBstGA5G$_8b#K%P1GeUYS@A}`OUJ$G zV7(f4t6vM~{(UPf+}%Io3x-# zTvR2#mB&qcAkX3n+)(H!8pDln+z*2eLQ&ihEH?FIF2cC$C9{vnYw?Oy?0f(e_OGCQ*v-qxPMi=YR*}i4n0m`EQM3cV#&qTtolyR z=Yw9EBi;p5{&kxnZO73)f|yZR{GujlMVGXsO`ed&k4xG8vY1g9`{PI)Hw?3%fIdiY zC^2Z;i8ncUQ& zGIwk5hm8L*YxwtB!#~#z9}i8}Ji`Z$?w?%MFN;UgjH#vI{tfn=q>y7N=UJ;xXP#fM zU8JrQi4#slg~TMZh>Vd?FfvC-PQl2Xuu1?Q4X31Gm2|9%2C3+fmW9)~5Y#NZhDlJ7 zFiJO!tifArX;=T(rtE%4a(^uOER}qcNq!NF?=K|xQYmHY?_F6< zug;+~)-YNZeHXN)g3rgio9$!pd-z2s{Jbr+>>$%~rA8CBAxB&JUkJ&-^=@Ap3GaXK3!iQbXK(-heXO|j2Zox7@q?rNcz zlIJHG_u$17IBw9M58)_)a_mPs@F4E_;12u<+#nJ+gnS%K-u#??xv->ei!nA>fpjXY#Z#q18j*}(2O4U`X=3|pwkbl}2%FA})M^aCHoX_Z< z7w$xHqMPug@A{C}~xFvdi?sWOUF`R`%YB%QApou z(1;{*QW>?Vi(NIaH;f6}rt}R{+NvRS)10x_@0Trb+8= z@Tzk}7rUT4i|L(XekC&j6)Qo_hhg1ku|tx?cj}}WZPJt~aZZ&qqe_@oCrv2gyTvgh zU0zyYsO-p9$!DneG&PT*Ib*4XE-JCRTJEKi1*l|!YIUHJ<8zome(!|dWMOw`&?W=3 z?uc9^BUfnX4Nr*Ug61&M8_t*wXVex0y}`n5(lC28?4A>}M#H>w!L)fp)lt~CGHOqo z%g%0$NS7y36-&yzco>JHzdyeC+hgU=cG{n?P{ zNKh~-2_+#SgakA=0wP980;Llpqhe(g2;i%5#HuJbtrJei#A+E>EkKq9Fa`QVQkni zG_L9^HZJq0PNJK}JsKB-TDBv)jzjt{!pEdhQ;O*Ky0{f>{HmV4X-WpLZklqoE$M)* zJJy`t>%xQU%ERl*gR4@GC2vrYTwdzVhCeNKhhEpawJ(KMu7*}D1vTzOzCMoWIcN6? z*@Gf*68bM<`_5x~FXH-zah;;r>29iCeX302N{ueqS6Fo+olK1XnPM@3Bpk>mj5Divm|Y4yDB+ zwGdJTp=2ny;E99K&R&FpOCY!e2a}T!3Nl7Ugv1Xe6{B>5lvGGT#V9Cf6&0g)0)XQ5 z3;-oiT}VU6YQVhreu{XQSFXXdXmIcq`()YcweadFRtR>1frY0v&+R3 zW6!C!a{D;`{dUCgd{R|8?L{=EGQhsJ5I=a3^kz9=m>0Yx&zq4a4-2!JcN5pm9q0FF zOUnES@$*?#*1=Wdu4QD$GQ4Z;SU1+J8q&rO!)o67ws6AU@SY6|!^Z$y<&iV;s5wRS zygGV89kZlM+%#ovn=`hp89UbO2OYjD+OwAIT^26rGTL}?F>EsR_y5B7#}Qa^Q& zAshg3DkRJV!A)3%9)mDq5k>;qfJ5jo2n`M?CnBUcgp`Pq5D+3998gt8K>_)d(jX}f zDKO#^j@kvMa=|Oz2{Ko#%mt@# z$17M^DaB5l=cdrTk^K7pRNs9hFW%y_7Z<$82Yf2?o$H$1tJA3w@P92VA{6<84xHRAt*E-+Yx+jcQ0Ds(_Fn_NbTAT ztX^{OIS%YS4<8VO4O|4jy$Bu_MU2TJ-YI}3j$6_vt(j6c%o#hE*}IonTb8^HQ|^i> zb3~d{y%gc?h9G_WZF~W(bSJWbA6s`ATe=)xwiH;i9oDoT(YPPcupe0mKH7C1nglt(#1fO;fOcUJe#fwh@@%{0;lk9nU*0-S;Dps}guUW~x9moAa-;i>V_MH*rw1tpL!d$(sM5!%b@6Irn#R(q{cxzhJ=Xjp z*Z!*0SjM&5RK4PvQRpYkrA*m98FKjftsic1Ai85AwsGFSVavbyAh44MzHoTYX++OS zMBiz|(EGrtB&X4*c0+bgdVYF5fP36YdfJl6XC3G5@y68 z3=mugA$1T!gMmp=a0wbFMmdPk2qA>HK--@~_5#R3h(k&VkQ@+}jFA%2fUq*4$s~+| zga*b*LB%RTN8^N6Ibnbq27Qf=jsrTZWe{~t;sel3yqpe5ikC65;Hm-SW#Qy*0BcC= ziI%-`8OkKr(jJ$w>;@My2iB9i=OSMBc)v=()ps(-HR&BILERkBz01pH0Jy z^G{sCXMynJ#;&1p$5eZK`|j+cQ1RQ9{5R{x$D^a`*Sn^oJ#$w7VMOhUPxD?-4=;4^ zB4k7o@lGDSsAaDk(>G1oK!n%K*&F7pO~6@8Cdcx8Mx8z&O>Wqa$*6Q8{{9;r^p}Fw zkh-IoMqYH&X3SlbRFyZF&>1?&ki`;9bqbA+xlhsiae zDr2n57_TxWYs{Hy!*hkUL~iI*8b{TtQnf5tFZI`tF*jV`J&%7JV8Vww13MODUoH4F ztod|spY`wq`%XfJFCs<-Q6u1p;|3&AL&uSAnT)VMeB=Dc7H?w{^yIJogK7GLGz|hJ zad6NfkbtcU2YW3XrbELGXqW+1SQG*-Z#$)mVL=eecI{@OqlRFOYdSXN0$T9VDOvAgE8>gR?;$L*np{j10^Eb?So0eRTC1>57wPeg#G-OODQhH9= zH7jB41Ty}sue_hZEB7KA4l6S4emS+?mZ2C3%;-@dPK+`6(zhC#Scm1hCpAu6CLgFJ!E4; zva!jFp>T!@Zi2%#FhEs%Jp!diAT$p)bxsmn9(e+0$ua4H5x!fwwRMlEg z<7Viqort#ms2+aQkRWban($T;yD;W#G)JgZK^jepyhH!6p`io0ftaHvC%-0=rK_1}?&e1R%nSek+Q7D@+``NEs9Y zSlQiz*jJp;LRUnY?RRZIJ??rF$8E~K@eWoXkV=??29A>3!89|5K9u9{A6+Yc|x_snSv^4R|K@DWMOggoZGHep?#vSrE! z?r6)JziG+ewB`XFp4Fy}$#e`y{$w5Hl-hkEmkbjW}9OpoIz0sQopnXIiz7 zPVK8vg{UuEG#^%V)-Ii?RHus7wNg3ApSmbdhF>!}7K0krgPRV*+xVex&VaB)3=1RQ zUPKODq)f=VXOyD@7X^JMG2kzhb-NYfo{azT9}`K;k?j&edD1n@UE_cNwN-;a$Q%7ARk)Phl5aHP!b3s#GocCe47@dM<$y1RfQ^09Em6;peGTn zpn!Uc1M(}QP}DT0j_#~;V#;Y05dnQpK=UEYDIP6)_!Ot6;*~U4?@k#GQ#OV9y z^3;eMDnkcHsNo0=0;zC-DPV9p454vw(4dgO5`(J(cq9Z|j6}$>7$pI#Mqzf6y&9Gx zyEru*)5#XUMdXH;;!uEwQX(WGpd=)aLXb3$&N`;M!PQgGbk#7NWK>9mLx~RPa~s|Dow^90635P~($@6F9COpo<>=wvI`4jq|8eK|BWM3+boa7l z=dy0^vW9#0^62Wt@lE}nwRlUPG^=3GD--9G@pGEQRUJ^^e2zJ1$6Bxh*m{{Wr%fFa z#C9A;*RO;XHo1ipf53ia3j?qs|B|y1Ty+>#&yB9xkE+^>s6L2l;Kw%|#Wr&jsyCub z--pz4qF?jk1_bPJS>k(T{Fo+Ts@Ku1^irKWYs4NPm(Yq_R02!J^gv1UZgCUi0qzaCd z!Qc`EOoBjYu{bq}sK$X7l{z#T*M6A3W9IGXCwA)n6c9{K1_K%h%xgd;72q*C8dcA9 z(=gq%bXP54D}^W~;Ur|dh=>ITa9QPuS32Pp6r7w2Vn&>rK~OmpNN#x5Cx1>cg0N zZdCnVbp38r-F9g6Q51l+gCAeF%dS`nZ`_XVIEw2z1#x1+f+}fDmr_+s=oqB8bdq}} z7>mo!XGd;2k+1H;M|JL{IrG&_&_%(>*~j1aKKXw11+jg~t$x9`cGLeAH}s7ls`osq z^DL@^7u|jGa{pFk`0roL|8ujY8K@ri%uB}m{plO5jZK`lUHj6rH=9xKhhog$9!7|w zLtwQqv>J|9z!0F#0hlU~2o)MBgHR$k;=%#Iiq_z%GBR0%BP|z)Hg6@&NQZgXI~;zY z)EzIwAb}HB;4xC*j_?>zb}tB!hDO)ZnK~*%MIi&pm632#63C4oiZAfSaw=Zoh*QvU z3MV{(Rmu1g5jzu=&O|_4F~}0>STP+Vpku^Lpu>>Z2`vNdFax7zVnDB?qN21kj41%8 zsBv80@*L#`OAS^6%<- zH}%_>sng1YDP{7iDSg$Dv8qqwm_b^Yzh%u`GiOZe(m;JI?DNXXp#&iRjC^GC4*=^U zo1biK+^~NsT@5MUOR3`~1Gd&4L{|dq3!0tdxYjdv%V{b=wtg$R^EjawWQl^f2}%5b zDmDE%JbTD7|1GU}l2tn6RyXT5wdHeq?5{ZXmJd))0_~@s{P6PIZ+nC6`zPG0r@g9H zeH-?kb)AIwo=3mogLz-vgnVGa|M-WdUeCGL zKC2-VE(LF<(hL}i8jjV#APo!+I4g%c$n0TqBpjrOVi-&WhYR5_1q!I8qn6@$k{H}N z8Q*tY!o56M)wdiKxk+Jg86GW%kP1*(L0^N%TwpP01c;AC%Sj}y6HQJc3JH*ihyvwR zOaeDp5pYu!9B6jbbPzoev^2c-VH^OO9nkU+K}(&vCH?$u@tkkXL43nu!pp;`+QX<9TjBKw5sk;uEvM}E)09_- zDX;coI*wxpgzRB4ds-eps7lN$Lzb<()o*&#Z+qA7dNpqQyxQ>X;rPrQ_-u4JjlzD& zfAn=d;%{TE%!VoNl6l{%P2c8+sv7h9G_v&waJKaLSEc@c?#2Hp9XTw`D<>u}fAsq1 zD}s#;WNY&}-c^w7A%ekqe|f6JI~fR$dNf&!z-eGu)q@m6DxkU!a0v_{h9N}u@Uy3| zb9)CB;HeWs7UA1Bme#t?o|X;n-!87MCrAk>Kvg9csen)#%0tCe5z#6VND(0c5q*w> zY2_j7ggAYu&7Br_xnwG>aY1m7~q-kBk zf-!N~9JgeOT`|WmThcbJioig8=PG~yx|nxc%)2SuyUboUCoJodRt@P})=V(30oneh zC3DrBwP;T3y3%@SY8v1-(6c zHh3C1cox!`htGQS=xq|VcPg;*om=&WUlRzF_|dQV5zXAtro-6R{Hz6aH^(&6{GOeW z43B{Q+4-wSfTyUh9=-K*v-owN zSfxOX9gt!KN(e`&2t>W7>(q;|7egTv7uCz^cZ-HfUal+n0f-0~DGse9LMk#&Nx&)b zXf+88=CD#cMuvwj@E8G@0)WX5kZ2;X%2>q%xB%`4Oo0xAQLK)E*E^HGAWH;*YF&sL zXM)xZBuni=Q(kHNGNNa=jW4eL7A9+m3y^0ic55 zVL|YuBz#;E*~bfPibgb75G!Z=N*6rqcKutAgBuS*syV?myKx<7WnCvZweNk3I-SzO z?SudRd!~&I(bg7Jgx56UXAfuLFr>f%DRY4K@Hz~prQI(O$X4IsN@ zNLsgK>|W*XUKej&7p_<`$Ia=<**GA)-`m;(9D)3T>r)#Wdm9_XBU{WPo9I+j;daD} zoycl#?8`lN?S9;g&9IXBz`E_o7CyU$pVD%a)^Qv+1Qb{i&oL%0SySs;sCB1)ja={c zv!HfSBy2(&Iwl3FNaX7&_xf&n<(zNjidWOVU)@eXYaM9 z>ohB`o1W@pANa>VfY^;}YYV42Eb3Nbjvh8rz$_rV#z_}g-~J) z;4)f{!)S<*o`ThrATyPC9p-Hgbkl+Sfdo_+3;3%h13>XgDqc+`fG|n{{4fbGbHYm< z2{Ia9$pn@3OOVJS7+eW@CSK=^)wqHz5yVgcQ>@w`t+;r>kl z0C(>ud)u0}W=vkSWbWPMZ(S8|uJV?w*+a_25Vs$H_{#RjuO9yQ5TJh9*r07}K#?Wd z*Z|wi0cc_`V&d0bS<-Js1AN5`bygh%|gu7TL`4&u(+df9FxT?pwL)U%Oi} ztKFCX*Zr1drDY?!yp_SG{ow!IH!Z&fW&zlLqiN8 zh(Hj*Q6ou82Z92Il{;W$aFo~{CAM=AIKcRJNC2(~!cJC&<<|PNtg&arHBH%y31L-$?QIg^8WFUNE;h)aG;oe$y(iQ zZ2kWA57GD^(nF!*TG!&KppxbA^7YV~?Wn2^P+sGn&jzIp_?9gOwH_xm?I*S##SDlO z=C#RNro?$md|@5t#jb1Bwp%OTv-K1p>(ejv8kt z*QZ^)&t~2K+#g&n)sF>dWFsTse{%o&!61R37TVSpWoxs-4*4Z6L`SBmkT?Y#(oyIJ z7f+oNLyM;EStcFTZ zlkpl5Q_#q2N3xnq(K5&?23hGyP|*nr5cM;_CJfkdB7z}1&|ae(!2|$x!Rdewy8sgf zmY~39#h0BK8d>WMX_#m&9c2J)WuOc!04v7ojIp{wmp&-Tp7%R_)VL~kN)!D~7Yoje zk-c=8w0xPmc9Xhwo3isE`|x8v?{n_)FZp|SnZR7VUh=Q+@~9f{DjoJIp9_33A6)v{ zzaWDiiTc6M=6A9G^82Kp|B@4kDsA;Fnh7f3i7h&a%RfjcI!r7&WEUPLl8V)3SG3xtk`z1<$1Q8c(?MsyU)D`ggz6p zXT##)UO`YBFZB7SOYwVF$4QCk-z~cTHZCg%%DbJ@BkUsW{^V*4is{2|3~Bq&WX1mU z*H6`1mH=-9g{H<5RY<%VOVJRhQY1!(CP$}48j3GWoV=n1Bxt0MS!$KoSygvRwshl zkzjTr=&5)eg#g-BB_OgRNkb)R9|9|U>wF~98DpekNkhoZQHpVQJGUXkn+8Hi-pF|#HDGTsMf??jdI;wz35t4@=u&eJL` zQmZerUR-3B9j6p?G7A?%8@Ji758^wxk;B56S!KeGA#usVE~tizHdrsVSan?27QRQ@ ziFePr-;gL^R1(}TeAaR1-^>fid*@QV<}oCB!7;rX;1(3TW~K){4gTTxpqLVDAFLX{ z^#2z6ITz@c>}YdH!!Z)za_vzHI9B0+Q^W9bIG`#{hQLbU=nFga zg*{SWhZKBow-xW#Fq7D{9Q^h?f5p(ZsK^&YJF5teaw18N$E$IW0*jJik#ZbbL&RuF z&;wf?AJ}Sj!dsjGVR0rhQHh6SL=32^DhdI}uga0EpgXFaC;(Oi3v@JO9gC=8615Lk z5D^nh&UmXU(c(b_$XeV9Mt7Xv4H#w!6kH(AS|$c)ufZ9m2Rh6^8lBN*7tD1ir_D+4ufbAx*4F2&2~7f6V<=zn&mVNl>~>9Q zaEd7-C%mMmwm4_M^(-BpbzND+|K0Sr}Rf)YM;IENv|I$|o{MZDoguNk^GFZ(%%i4td$g65MNu9zEF%(XM-$_u&-!Wsy0MHh8M8PqF^7*a${7~&W2(xwdT>WybPL$0}l z9vLmn^m;~eJtM7|mhy&`(&Lsj;-9w=P`(#Y&SSqgPpP>`ZV+VD39=hRIW3C(ri-kC z&B(mnsPfaK7Z<6O7g-I$yw}nf?TVT<`HLo5S&O{5R-9KU%*j8?%->6{-HPiwi5e1t zQ9|snmR-}#s6KpFvgTBC=uv;CPK0-95-3`{npdZ#B`PukYKW-1XQH}Lk0FC z$Z99DnnuykL6HT71wq6Y&axg>V)Qhe-UDv}m@=_u4}#Sl*ki2T?SZXYXAH1X25`dw zei*biNWfemyqB(!g@v)O(4fLv+^|+Jw3>=EP+_7`M!P7aR~9j1if!C|R@mj3SwTq8 zKxL+5vMPwBeeNYAKH0tQ89grP{hs;ngUWWJs`>F%XDKfQnf0RddT~yTtf)=-qF!9k zD9dY+JTE+mEjUgDuvQD6x5;W=%NpAhuR7(gy3}p$ipqL%QLU(;PF7SQ$Svh%H0;KA zA4LzINB4>2YML0uJI@N%7*$-)+9ThFW8W4)Qhrd=kso;ZVuTrM_Z?s*)yBrn>N`3|? zLrMTQQ06b6iV)x(loSxw4zbu0Sv?!uyc0PtE`6_VUc0W~zw{Opz;Z8LPIr{y@d^m9 z1h8U3@_<%6h%oTOkbw&17k^DBeF*mblpc5YqTn_oSMNj-gFc7^;(daOMpDzL8b>g> z1IUtriPAACIu=<2Dl8qZX5hg3liG~{Jg}aHGq~bSt~iqm*6cL5xWbnHM`#BZIt8`WP;bv$;_V< zoPJCXMCR0z%ZA+Yd!18XIVHE!vq!zkH-o`?5}3u*UZgdObDG52b&}j#c}a)nWvim> zm7=g+QP?WUt~g1q5~MXsirW-#+EtT1hPgi7M6Y4GP2Jn5Xl#&IH7TpB#elg5FVAvY z4w8C~qPvArMb(7o9It{+R>i)1&5>8#v2Q&;;N^i|*``bJx=U6H%>R+C^CKJFqX)eO z2!iwjFcjQ?-im5#L$|T1iAC{MIqT|bUcR>iWV~RY2FEF21eragu!rP!D4@L$T?`y( zGFti=U=5%|itGX0Xqi0dDY8&mE` z1+GbfB`EP&4cK@gU{pkmj)*bQaAq38LdM=Psh`9AeoYMiRF;0%@yhBSD#XFXbR0ld zNydLkBdKZzNd=foBk36=J(KjXA5I689gr1+)kK`0hBdNqMkdbainX|6uiS{2?j*AZ z(a6FYnP@W|V+LiEfxGggSXuaM7yJzqd*zJ1cE?`1V}O0qJ0Wy*q@Ikp4#Bhq+xtBE zCgkxqp@08F65$`&ZuYt1nCyIfK|V1zAD7bXl={{^YtHxiMsU$#bj3-0`B_qhDEpd;hms7pJQh3%58MtMPpy7jGbW%l}P^;WceEf}+K`wSbM>Y)}{ z{VRDxgQTinSlS{hZ$5k8b(Gw35?Nk>E8g*Xx#d#5=hATateKxyclfM)-K}7b@w^qC zjQoADt!=;~8y8y}(3w(fY{3;&Raej>+uHcq*rcQWvVItOs3@8e=Wpk@Na6MpKuia; z90riZ$>CTz3+JmVvEagw{c$eE5RB3XsSs|Yv)iEJR@G@z=IaApej(h+y%h`(b|?me0J-p(Jx zJwLRU-qzJCi9`_*tfb-;B!Yqr)R?StA}Oc@xg#j4L@fi57pzP?th9lZMJ;${Clo|g zkeP`!F(Hc!4tU)wFR~T*C~!|lTNv1D2I0!X>G~Pt*5B>Q+40VuaP5M%xMZ317U0vC&tL@UgXj7NGRup$?s(bW+wx^W`ws6;EB@FB|UuC3e>5H3N$K`ac+)k7jdCTT&Z1O63_2-s?1l8qo4 z1_K>1q;rJ8+P}sZEGR-II%IJrT)C4iKJEq<-N+!Afk_6$bfsA1+^^$(uY-NAQlhVO zGC%k*ubI%5>jPCS?#wID@-R^*DpKo&zF}dyfBqX--wOWrce(H%s$CHE2~@BRl^cS} zEFfmI&@zFETK3Q13CTGKFFj#bT%^1dr8Y=%+7zXo>aq?^;Tug=udcS=Sl4T)?$T7e zQC0Nmrv?oxgT}=X^YXA^e&z0P`{U`v<#xYeYr=Xqb0vAJ-)@$*y%JY;2upe|Qi}?p z@Wft%FiIf8Pf=342fO=!F$LNy zaX^WmB84DgdWtw?`*w{d7rqH><|MWrM7`I&;$5xtFE_V8^c^*a38^HxCsVsGJ^n_4uAIb zS3uKZ{`k8};*(c_*ivs;K`18gIVr1&mNvl3UG&Z4gq9yhRGh_Eo+s9cQ(EP@ua(8G zm1P~O>K;w~puT0;-2K+n@w`iVAqTc@VCTQ}0HpINv$-MiPG ze7@p;yqYv`cPQ#RL?!(f&!+~wIJ$&2Vc5Djny0Vjs`7Wl(feZdzBFM^7`440w!9oT zJ?PS%3gv(QC%{~`jcxv;-#@qcUCs}G=voe&SJqCPl@090wR3_-`a{nVFqs3GqJm%$ z0)9ybgcpt$+aX0ykg})nhpK9alsp(DBp|HL4zcS;Z+VyUYMxy+8s5cC=;TJtscMd{ z)-G;&hacY^?H8Q6lO)bg5-LSbBFhP&d&O!Acs-e*!ebw@2#_o}5ls}*6`g#?a=fCG ztPedb;fjd4$&Ik&7fLX2u=E0gL@=|HKUiYGRX7%hHfRa;TS`m?p+7!9kZf@z#MZ^LVfEV9~g>Xq|uau{`VEm3T!%T73!D ziO&0i{2LcXBNdGBz|0-~(HlMJ@IBeaChRNQq`&P(~U#t(BQP=$by~ zpSuxQd=OTC9R2bvu}PfXp~!nJFKt&;_vw3wbQ8mdxnbk@puV$P+W;!;q;cS#^{ijF z+Nm0@7uD5EYHEb#jgpqx%R|v`*V=#kWcZKY4(}EHs_t%a*?_okb2>!+Ay;Hf6&g~` z)a-L@!i6sVOp|`9&fu%kj#a6L(u9rkkmV!)=@w=S>T!nc?=v5Ln`UEMk%pL*7EWJO zj-BT8ZG|dRF9XQ_|4tYMKomZOOMZrno&tPfat9QMDfke+j|i`7 zjH;VWE*}W4+lUzwr1YJ}&nU_cua^b)XZ-sGzOMZum?GnL&B_hq2fgu9ZZOM@Yjc*N7UKm+uM-%w zLZeP%UL3ov&bsra09Y;0XqM%{`_9_?XyxjB z%(&RA>FUw8bjS+Fv>n^`>PaK7O*T|_QCZHJ^h{ z!NaY2vAUF0A=*Ji0jo_A*jod`bOp$SL2JV#8JQHlGst@hT33)3K6I&OCjQo)a_NDy z`r%DSlg3{S#%q=FMr%-=84ngrMuFj@(fHYF`g~>5h;FKKuHA4~ER;1Z(7G{t+fs2? znR^@Q3w*MXfz-Po?>y1vfBg;+HstHC;=cRt`O_cEob8JX3Ax>j{9)JpMc<;0z>0&= zs?(TiKD!x25aQf6NkzYAbjrwCzdGN(mCl&=26ZESnwHnHk`YzS=FJ}W7gfJ%srsa} zgqv2%OK%d^Pg^)=|1_xo{e$|yt`GisG-hh)7e4RiCN52fD(~_oh774CQwYE{WC;z~ z0)5uGK0{#0I@6^cE0Q?JL6dVHZ(pcHrph?V6^2N?JB7DjQ$UT#E4)5^!P+B*j30uv#MC zKn9amAjnuF1=LdlVCxN?{Mpa-KE(enEbP{WW~Sl{UXGX51yTy(43CnM!CEOs>WEc1 z5&*IwVlp^W3~p2di=YQB49E#tkl6))=R>`5#ookun0XV%8?ouL(Ri;nebAT{hi1dE z`J>kStJ(a?V!4#vx0hVIqHa7fS2gjs(=8urGVTi4_d%>{uxLR;m>9@=Kg=rbN08h2 zeQO*4-FHO}|EOR*t;xVu^wP>_J&G3nia0?PhmqySQPt;(uf$mZ)-FZUu)hod-(D zeSxSZM?~?T|5o>cI43I|J<03m#=PG4Z(H}RU-Yh<^BFxU+YN9#`pfq+1V(NTN$pTF z1WNpOdm)*&(wJA2!mMlws_6=?==7`T3#k|hdp;HLa-CiJIyisqSyrca?zDgJdDfh= zcS+OJ$E|8RN?B14yb~2qypQA2DdL|Wa(*zr(GdWwcq0kY5g{`XXCdP+se~IR(q}Km zeOAPW>Y@*U-WCSINJ3twMT=cr`QTZe|Bs}%e2RN(w?!chSHSX@xKzGybxHK&|gvh)1yU#vnpSmCJUvMYuR{e^iR=%Xx$TR2jjAx87jSzez zsK691G=l^4@}9LJXoe-W#sF5J`3Kjl*a{}LH2|PoIvZWbqvXrPlRfguokVggmxwv? z?Ijt1`b5H!UhGKEcTf5Aw_h;lw$Lkr<#n*#ZIHti&gRC?=EBiL4y*y@Iw#hj#$wcoJanuU(ULJHU(42iYnto*9z0>MWsDQ z)617zv>P$wR=jz8G9X!~+bOQ!$?M$B>OHK=p~bfBwe}p(=WOI~G3S~;U|&4uM-+UWCdMymzXS_( z;U^gHlOFfwCnmyhaja~J*H&H^RMOznJQr0y9#}SqE!rUD&7hL|-76Wvb+p*DZtt9N z&%vGYsr}JzP8pF^Rk5BtCs|wB>uTM=^o-#)(LUUd5D~Dx>cftW5l1Gl18}_}@26Ke zQvck_=+@Ts2IF#>6Mq>RaA9L2HPn?lnTx$WnYy0@08?OKH-_&bp}_ZgPX${Wi2=Aa zz;$)MMhD9{Ku4T88r`7nFEfMX%Uu%Dvh?Oa{-4(}2?z*jI-RML?os4Yo?Ohnn5@6S zSe`rTUj^CRH^b(-XI9Wl7o!_b^D_&W+)PJi@mYFb%eo1w&wyeCuk5(`s+b#DE6QpVRScc1P_K`8w`bfR=aie1ap^|gc6r@a zPNOhs@UWzLzp{*(+_cj*dnM>Rnl2Tjri}Yz5-lCEhWHBSgfVOyDJY8?Qp}1P86xc7 z77L`=0(qwJG*=+al-gKH@PV z%puako7d2F%bsOZuGvJ}vI%t0M)D9Vd)dQ+q^!C13CyaWS)X*4`U^(*y`9U2Eep|w z4K68pHs5DZjby^N3ID1d_rf7}U<>NtM5ML4B@#V)MGZadrdDRo!g2q^cHN+$qK{YK zP01VEj;0;vuzk(h@81F0Ay}Xv8NrT?pkT(4n8QH>d}U+w!`tR2!27Hy6`Z}7-i|U; z!vhnj%*Byy2$0dTFT|xU^4i}FkQFCpx~JAqKonm% zgJ}ycH`4<%j?_i(mp8QTr8=NnLzEun=)NqmeqZYHp)}v5sNW%H$~$Knox6t3*(6l+ zV=MV_wStW1t>!TqmGwiueRnJRdBgf~J|U&nZIxGVWmWT%JNNRMb}CEg@hLN5y+@-< zKd6b_0p5w`=xn=?CeMUPfN5w3B`lv7S;&YQ8wuIFD-p`Fgz_&!dA3lN%?Aa09Lo{M zF!#gAEY!@5Q(vh`yQgji>`lazCr;q9c=@m!>_Y|F9h=dOJ?j)DSIYoE5vejU{mo0mqCAs=R=d0j zpY#O`*x(c~!V8%3<^1eQZei#C1nF{H^y^~(_m92bKLo$7CS)6x!jh`(+{*3js;#VI zc0%%aMCf;4RF<`Ws+oU^m0yMpy23TO50^;_&83Fs(jv=vNmZh>QBbYdxdKU|P@W=` zf-jXPN#-0yF?aCmEbobKt2PXz7^aQ+`w?jBkPq%Hjp3eJBf^*gPId=1sbwvpZXv8{ zGPq?mhDb^7+l(98#Ln-bseKO1s_F}MUSpd@{cD8{llbahm-0T>s$sXf3D2%o?~zUa zVT$i0&1abGGr`0x3b3P$z@g2^1wr^E$A5sdy6e$=Z+?~IQ#1q^mR!rIB9Q+Lw_WCUkBRX z;O*}4_BSZYYn17Yukn?K{<)LhRk(-D&hQxd8Hk#$tPQTb>}6@GGCbkL6m-InQ-axD zkoh|Novnfb?(w6H_gW>6x|M;3<;ezljW)R>p84~r>{WCjJ?bkxp@^MaE2tR|lgPJ+ zqTiRhzi;>c+%bR1Cgf|i+f`NDUyJ#fMZ)AvdZcfugIkiR+ZQvBC==fVv&2r^_qEz~ zYH`{UHkAU}?ZXxv)jn2O{CcG3t>%5u|#rm4<)XLOcJ6w`m1k0EVgHjk1i$AwEfQA=AP zq@B?9{V2*_GD#Fe-HW9iePJG_)AsP2dlBq|0;ZQaUk@Y?!2Y2S^`+*37Dis%n_nkk zq=H2m7(jkqN_Pe4LD+Mk3N{Bcqk+H>&NS5H83PY2j1L@?V0Uxh0PF9A_!kRc%z^Eh z>m6G{0jyVE<`+TsH!+^q!H$;zN4(87&h`dtb>nMs<$=6*GrV$vU)k$jco?1eScwfk zpP1@Ok-9fFh_jp+@v%ro-ITdI$W7m$$GP4`IBpuevsF|Kc=kB!)0<*D-7*}aD8V4R z***g(3Foo7>j8zdsA5J!2{-GzsCGoUPWf>RUIt}GZLMS}cXs=~6=414e$6#e+_&~uDH0lZp-uG0$LUo1d*zT8ZT2A9~QteDw z?QCf4S`u+Bv5OScyXG@Y@m%2gkoW!8S3UZBeTXX=jWZGTW4P~=evNbJ)&)%WviHC` zs(;NNU^>tCUts&M3eaoYSn5F@<*Fgmveuv%QD2b}U}WH-mMKUcEzlZ$U9S70&)=4B%U z*9buYh8=yVzy!uKf%DAZ!h1^&7(ELFJ+~avC$f|+U*~(j?*OdS+tco&`4SFTmuHlTN~^XilNJJf^2{Q_jPi=y$G5AvKdC$a zxqJ5i?vHI(h7NjtA%*AC6AKwBCH%bNLPYDdWy_d3an8DH*`a&Iscqh&am=Q!!@T;7 zVXWy38>L5}MR&em(D;-6PY_5|htoKGrAeLz16z`Tz4@7t13T_Mb1xB7Wu)D8}#X6%!>*wLN~M^Pa7LZ6E#b{oOw+9m|P{eSXO^L0RPJd}eYX zGqpre7#Q>+q1GV2+AyI`KeiDW+hUnXv@GZ||2hh+8LrjKu4VlW83~AJUG2!f9!DrV zjDM>{oNynaMt3f!w=Jbs_xm+Wh4fR?d)6X*fPaDFIl=G&*W%i)|L}-QYlma=WH@m# zrEwvmZk|xTfN5DK^il&y=-6d0nj%7zg%}dYpS%su+nn|NvbDXuwXM)KQ6ObEfhC{b z|05Uw$Mx2YkRu!7NQ$}QXpT5maGc5V(cgxGjhNA?jj`OqP;L!WOa|8|``ej49QWtE`4~%pq zX3&d7{E2Wy^6O0Y9~YOioj1NlS2?KvNOE6-y|GkKKtFnr`ckdf@I#d^tUS)7pvt;n z$Rl?am%D(?TMsK`q}K8ZnnVq4J3TEsqx0t+a1I~*>lf?pY~Wora8 zHB0I-OXxDq9WXB)v8kH3FI#piB)OJSyb35@nay_5`Y$~d6qBJU#2L3CN@V|9M(1K` zX+OGlCcJ$is(#G7b>6Li!+V(KJ;(K3*z)V_cdoCutr`QvY*y=PV%mmvn?{!n?fl-~|8ofPLfO)0_DL4| zFo1Is#ur3V?4jF61`;b{nU$g3TpzTcV0UxlW_g_vbT-p06Vv5CC8z&!BR$zW%}bTq z8UdFa+Ym~H>rf1#Y$Tjxf#8_yb4=h|OMM;^P*1QeE5luDU_uA-Z-msrK;i%<9m6vh z<4f=pOg%PWT@II8!zDJ*QyaZYdyu@RduXB~HPaIte?GcDf#LG1EQw4Y|9Q_VUJh1V zdm3Ix+5Ev;5Z}K5JqhOVqqvtEneey8j?l^&ll&U{T%ud{s9(+$HfK4sn3_<{&a2~A z)N|{bgq?jyEA$^HJAZEZzb@x4gx%uRVnKNov$&$xqjmzfblFY4+&K6@$8-rXw!{%v z?GfHjh@1^cT#L-0#O5$kD*4&v!s5t6cxM@T$*XYD{Y#@Y%0L6?UYtKYX&ZGNUc?S9MR!ic*9``K9}aCE$G1*;bj-T;ta|oQ ze8w2QlN?kB(YChEs$$fgxcQ}nn$@rzShpC^vKm07;794GWdV9)D{h7Dx3QhZJn3SH zyEesx>j!nq+eu5?5v2V*+Q|UtVu^b;v?(rOon(W7i?xqspM>z(ghk*fHUbhOW3h#S z*i0W}YJp4k%Fg^c5qCCJE!!r^ulG*xWU@=~SyR=y6H;nz4BR(V1cYJ;qahJ2;V(AmkwU#o6f00U-f21&}rYO`0wA)ER!}1oHPF zyU5Q{b3HMzT$z48Hu`kxWhGhYlii9>Zw}8uAX8D;rM=#zxACo$QI3`>FkIlDK2Cb6 zk)!{%*jld$YnWYTm)Yi?(c_sm;F~sy%UlXC+RP}U7glp?tND#x2Mg5OW8Uvm_OH{$ ztF3`k+PD3VqIRE#QLiO=GvkJ{{htTIo5|R0YiyQnWUF7?5H4*#G?f&ZO^*2rN|l>i zB`A*1gnSvd{5p^RIvX9=ZX4HToZe@VGj5kT?T|}yDy9 zN3FBIQ>5UY3GddC;O`?Ljng5mbAC;eu5EK}olEW=OCEh|KK*1LVz*O$t<|?)+ZIw# zA1l9OJ-U4*kO+RK22282dAKz}2uX;g9+lC>?VHDKlw%@k|NERUW?qP2-AksN)KHJ} zXvfK$$7!6CX!cP66To^Lz~9D`d<{XMgalv;M8W`8OGBAC;@SZW6mC}?d1w5ovs2F5 z)$ZBt@#S3awU?zFX!wzcb$!U9A)JCl(2QYpV>r_kK{rJ(&0qjxzNNnC-oy$8GKmvM zxWxV+SX}_Jh%QO!EpmJUmJuk$r?go+eLMev<^y3ibNi6Fmn01U}9OAeKSiU@vnrh7i=@THl z#oPe&OTaxRHbb1-A#eTceiTJtE;d{UMlOz*FOJr3#+z?3b{Bvfv@&Fxz~`aRX&7|V z6wbClu*?t)Bq&}e-2}!qhYBsB+g7k0Yv_?POyY=;+Uv`m4Njf)PhAYpoDJm;!0CKH z1Oc-Z5DcGM!(>1TZuVJf0l)Bemi5$2kCq>+aCfC4c#P zd-{SqcugU0wbwVh3{axiPCFUbl>Prc>YK=Pc6$@>#U`}cHH_#RHHeCzCL}Hf0S8(> zE2E5?m$UsnA@qG{5j3^}@pU$&Z)e~;tt_q6KEBN?q1QTP%<;>#bJBoIR2ane>0h8! z-ve>l^GBKCdOb6QuIZ4vVNB~BzHu5=JL*z3;`VLSy=KI%y4R_u-{sqYb8EkQ3(=#Y z)3JWiwSyAUwHep39?`ZM*iQ`^qu~}f{;NXNq5wzTi=rN;k`J=Thh?Pw+(l8uoB+MP zgD3CdX`n)nLz&_bmKgkkXNn2jeKhARkX`S_1am8hnKea-fk(p})WyB1>Dtf!E(vp6 z5PVY=b5oyi)0y+LIR4Hbz-lbBH3E?@i!i+*IJ{R6x^4=mo5E-&FtRC>Y@o|9)aBm? z3+V1!>m53P8x{tvktYtIY=MabAqII|)}Ue5+XGkXy{QT+w}Jv|mBbQyM({ans+4d^ z@;&NRf9Z9E^SOsH_){?w0${CrsR6uZwht6g4I5Ze_-91*UT}9-CN<@G57um zV-j3!?4aI3rtZ<^=o0&o4$r7zbmDw)#(HedW>P6DGgDNV7W^KY4hc^A9NCC0CndIv zDsx9r;Z;U)O{TH!R*~NG#&#?-vQ}95a+y7O2_Ed^msLmV=DUGszB5<-O$9{mkXv*rlBS@-BgVfZsd{V2H!%;$X%}0OKT(afD^>W7ubb ztUj+5U0tvo2Z2lbW(Xk8|3{T%c;#Szi+1=K=5dR2ybX7~OT+$5MBicUZ=B7}?Tmr( zoNlJSYHHZ61L@JxBf(+oP}qttWC3QpVQon>2H7Bx9b4G8%|AhxAPdn3zGHKrD86eA z-M5A90mQ9<0vviz;{(C4x!#$l)meLult+?^1!wD{H(9|qz9yFr`Vw=!eG^@oDJ1my zQ*gdnC@4B9DguE-;)j=C5IRYgy76xC6c7CbKmCL_^OQoHm}2wzTAR2o*NAS{m;t|( zUUc3(5CTPiO?AnOwWue0b~8dK*F@0$ihk_~ZdoI&vO#uZ_j*%a(-%~Vi&ue7Xs1{F z1U`8=B5fm~h?SWks!DZ#5t67IoCFEU)Qu>BCD)oK6q$v_>V+r6LR0jD{NB2#J_Klf zRJ=FR0^zrx*0YQxj9E-Y~3R=;mci(;~KQ1wBARk2Cz2c$gI-02jR^!Y^$TR`;Se4wF|7QkQlU zNPv+z08j?Aq)~K92u%{mlz_4gU>{;w=ON5t-+3Kfjxj<6fa)f6K?P( z!r((V{8KpcQ=B6t-0FRx;~QVASH6CbkSvRY8uti`4?)P+U)(+yW!MgErniwJ2DovI zyHUZWxhfZ+Gw?!PzIPL|603Il4q;`%Y^vmxm#F-7#OEJ0bwtHoi%`!TRq(+}TXYvw~;C<8qYU=?9j`PdZ^Zg~s0x)ZpzAGdmty}F;jv7bXeiea9FF;Bub#X$^7 zC_@~?k`P!21m6PE%*yD-$>PSx>dxEd7uxO) zYkh~a`{7}6<7_UsGTQgE~(gLXZst^8bM(#u9q$06n&YN^L<0t|zyEUSk|Cn@WM)<&-sbM(VyTkG=K= zb2J3783#y+%uKKQz4p_8Oyx!jiq;Pl-5)=~KYxbPRQ7+XLU^x*d#{Ppd*S;*!(II` z@Ol%hU-b3)kv7xFjO3P5+gv~WhIX%oqcrMO%b*~Nbk@N6xgz+<7X0LL@5r1VbL`vs zHEHd{P9E!SP4a)FQ=+Mu4nq7G4v-T08%Y`5{4lLYeh?*;zPb-Y$y4KR57kFr+Rr?d zA6q_BFjBl1@V@|Q27f84D=2^uSRMV|DYv8=wPqW(#=>je-}Pf4E8m>g^Id6frc_;M z?-Q+WimHVQ&l43CD=W;JS8?BGd~3(uTbDdr7JXZnd^?v>O-p`ltNtL}Xq=6n=VIr% zm<53B7HE?~HV#ushlLyBPR8jlLt4R<#4yCcuP%Eh+IvwD{b;9 z>+sHK^-k<`FImK`$@;0M9tZU1^;|JOsCM}Ij!d*r71#OuX#SCuEAV*!;CV57n1;h<@#}?wE|*752}0=8t~Hb(iQTQ}mM~`ESWMZzQPM zHEtpxYb`pKndbesqNBQ^&#Omn>JJ?sDp);Kv{Y0C6EyH*0AI$t2a2i+3g9!)ew^v? zVFaf)ZS|4(QY%N{Q6#WaDLf{7Sqc;Us7{WHaMR&8AKKNmI#gaZKGrCB{HUqTxqgN4 zecHQe%Dn?@;#PgTmi&mz08{VI4gUceC|Lh77J7_@o#o+{MYyHyz>VWf@<}UQI?R^$ zGo%G9NfZ-cdJ;sJ1Tjwn=|_0x9*Q9iUaxf-di#lNfZ%{E7a-I}8URV*eJBKIjLpEX zV<5NGKeINtv_oFGAb+@<-8v($UCnMCOoT2*2@&SOnRbymj*(xT6FS|xgmsPtn1@j`9a%13NrZ7sFyUW584e{BEER2ToOl z;(bs6_-lavO-B*@cSU7@ull3HXe7VdZ`a>!^!3ZCzf}t!K2Lx2IQ!w#NhpHuPRLtllN&cvpglWt zGQM>%W;+<=x*6fI#-TA*VR`mBlkN+$4%!86a_>9uUyS)Q{Gg8JhB*Y#6d)>m5BQgX zyV)9kU#GTExr>S1#puGv{3gclCL{1VKlr*f@wznjI@a&f3n{bK1>5sOz$hXi+paL; z0(L;0?P&Z0)T7A*MX=KZ4mG%)lc^^g{ zUcZQHoN{el@N8Z7XQWyCyQ}Q znL8RB3soU)DU=s8!Oad!k27mv;bpAH~&ne%I3!gP`G z1GIo48g`b2o}l{yWEX{4(q8!5QOd^gSDHA7Es5hu!Z^|(wj_`v3+A3iu%!_kNf3Pp z%Qy;}4m25mr@Ib^k>OA#0>;$`*@iHoiT)OlJ=`0n^u?wysX6=%2%H=YZ#+$}U69w# zCRdMhUpL^^(f{sh6+^_tcKVl7gV(P{$QSFg^1kgG_OP$T2=w)ex!$G)6eO2| zfF?jH?t|oipgX-M{0%N#jjplgH)!)qf75esqkDH1a500C#{zl=XbLl!+!T@tSF4=$ zTKZRI009Adl1~p5^?+^vpA17Cg?m`R!T3Qz(f93h-iV8U<;&sYn4$p2UJO%O%swM> zFNV37BfP6o-c>L6vW`^o zYiQOet5!Wz`TAI;=&$FqMo2cwbHmztPFHW>#p^Z|0H{jSGqt8CYTuu#l`1@`M7`^x zeZ>ZI%TAMHb|ZsU15IXK z*@go+1V0BaEKJzMyOXWV=5(Q5FSMIgH5*mcYE@Lql{JWJZ#R%u8>ZHadWfEvZyKL# zG(1k{fGcr1S)|oge;5V|W9Q1xZH_6amB$P)*^q7h~OzMnloLn9Z#qx;Tw3 zui~B(dFQ>{i!RQ259gwncQe4d9TncqZ~da~{NnHZ5+D4zIQ(;S@JGJ;dmmKm_D_N2 ze`Ni$rRXrD@LEp-5j9+9G{53BIbl0CVlzBw-50G-3HIcaCo=<4>qwJDC~Wl2+g3I8 zCS|ooCDmqCjb;_?*>^C8vH1o>fAaOab~Wwxry6YlStZQ|744>{8sGm`%l+%`rUsiP zT4>W+SSKU7i=NoDif@?lYMJsN&Uv@b`Vv9euA&Ah`1`JD(|?(VS-)3DMAJ_)HzjFc zuHnlQz#+^&A#fyt?E6DFngdGp1groEYny~7BVFPI zoDHtaH+#18cK?%0B-k{+*BUbTG=tPzHieQ*bt#q*fG@`k$_FpD7y#Yl=N-i7UHy+> zgL7g75!-$~Hn%>tKa$vQgkgGwL1qdv-d@Mz;bV}B2L1@NNuX>2 zvY=B9Gt?H$ds9e$>lD-m149$wX@{{)$yc`Q8%z3)C9mO})-%srIM*Hgn*q_!S<$bJ z?O)uz-@AK%j`n^Z?f*I0{j^|Sw*u= z<3)?AX2WxJfGnuoZ-1-hD?e!+aOq&gwE$RY3H_`jA~mFK3DrL1*)iiuob~LP@$6pm z?p;ImZlK0CG0Os=Wg<}a2sCjFO_Iov#BgOX90}-`0zsR^m4tKTkxXgerZ{l*IB4>TYV zTRs+ag5^kzeMi2>mj=(A#o)MhRQ9s};BgK6cB`G6&HguIp&_I0_485qr)dM-B?IW9 z31rz$Z^IQ%^)q0HnQ{mwJYR!te{%uKQD|c>(1Y-F-|y&~3k;la&z|WiD8^{3mW0C^ zha8(Xe5yA5%9g$IM%>cBT1JKGV@+O}KKvUL?8kqiWdn`07!%&BE8eRczN?%5BqnZs zCyH{EK^GTpg3Cx!z?7A;dg<{*a!}7kVEYQTV+PeR;ny|o)wkf=zj7~Bn`K~E`RHXKdSeey7l&;E zZQ)5c=OmOR4rYl%z%OiRIO`;UCI(Nh5|)pH*H`^(blx|;`q=+LXW*mmn9k>UC}b4^ zNGI@=6-?*~{N^AJ9D0O=fvAuZum!LH?+L;vFx@!|g%?+BHBVtJ2S2N8lC&A>_>_% z=bCLv10I_jiQM%fK}$G4*oKPuj8{|yLcWCO&#J-^t&84WWUqFHFNkrdWn-&(xDuv+ z&XR9>hihECvExgX|G#qG-aK3Da#@`5T3Yj)C!-gr_%&e!bw8PQlubLzV4UQzqy=p0 zSMFH_@3L8ROBDSW*#5P&^NS8<)!jb;T*2NS!S27n=(>IUzxd$+h92gxBXjM;tDQ$m z45k+CN9s-HJP^!iG&?_%9f@Lk*im7K`FHR7UcTs5*XU5w0`p6ox<;3}_Mpb=NsTvy z>e^kZnw_fJZ7Q10%4)4jYVFU|8=tDxKUV{7aD{z<_q>m;jLFf6&&Iuj7sl#cEKM3<}&W0=Fhyu$-ZZzCuN zEX|FfvrwJZmmiy8(AF5Ij%HMSFS>R#Xw=ZfNSDLGj3_K;+~PC z@~z*T+EnLk%a7^Ek2wyI;vmDy9IJ+U$GQ^h+60sDNye?UHvNO%9vuIiKY+U!Or=h-cFfBYxvoPR07X<91@)tm6nrlLgfrFX~7$+?? z9xZh{&CdDGEc;Hc`OU1O!JAnmVJvwsY4ae3c9=##&ZM7w;mC410NL{z;dL8$GI;y< z#`Yif?)}Hv`xkrX59i?DyS%d*XJchMEu~;@L{N;yP`&9C(Q3xUfEn)1&JE)w2Jk$< z@e7-I@p?#2gQ%iPRM+fM*BH>y0+@EIX%A_<9@Tu+qpH=Ws@0;Z)$~lWNlCr-nQFU| zX8m*ZswZlB3Xh6iUv;ke5@|{Ooa}y1THj`L&qi?HMnFF~sBb;EhZNAa7S^{G(7%Qm zq~d0o*cF~XX$wc&C(sXr0QU>pBygp2WRYxHJXaRMl7_ORpm72mRKT)4Y;M>mQ$xMx z_1l&=@4G&H>UsaE`<+hTN1fqMpGI|c#&vb4KYbp5|8eO3`|*#T+F!pb*M9RI3T=;f zX!_t}Mu~Cd8;F9ogFFH30r`F5)_tv7jOBVkHdkW{e%B=ht|KIO*nA znSNVz18)V^v(dF2Y>SZ4EF?7Wu{9h*6%Cs|=aJUt6puGX{{2|*iQ-_L-T1io@QnA^ zobU81DA<4{RwzjjxxO7k-i@d2CoqoEnBsI$wp@7`Kvs0yxAk*n=Qnlx_vX$Y`p%zC z(XY*;{}GL^6zeJ}m_B=MtEP>DLI&bsD-rgLa35N<7d;Nm!a7q7^ryAnfFrl@xk~Nd zN-aw2t;!l5%4(fY)q9lH2Gz6&)wKFlG`m$byPs=xsoa0<&o$ehs<%B+ZF;7jr|_^Q z9!{iUI;e5|tc*T(YA-FKj~dtuB*f%^K5{T|HK=P9;2Si!fght07Pz<-K6-r{Pd~&{ z4{`L9V6HR>un;U+3{w`)k_573K@2H@dq!B^Cy*|q2ERGRJbaq3rd6z|Rr&HoiH3HW zhIWnC>vGMP`RcE-m9=u7XqG;I(f#6Wv&M^zrt+zH#vNoWL?FI%n1=vD(o`?*$lkYEz6yM|}DwyauLy#+ESSYq%*&&=Mnf zg%e5^MNk3nbdPKjOAI6;8C+Qb|FT7RI}MKFt>4Sw=k~98FwY+U-}U@rFVJjTJW>DZ zZ`Phowr zQPu2G(&$zLrK-{TT%+l^CIG!vNvq|lTE}yZwx=3jAN<`~XHBF9_cFiqvcB}Q(gCc! z;BF-c4N!u5Rs*_8f#9C)BL@so@zd;}B|d(MkEQJ6HxC2IM?rLOnVtkOB_Rw+2wfb= zk_0ei0d!d?OBTFz5Jtw}QSQTQwN$@93U&*C0Gi~IX&+{0%{e<`OZDrG9YsCxII zNAL5DDQq4I&3*f}&_cf|+P<*byK*A1dO7?XHKlALK7A#kl9AH3mEW;lk}-zMoIz(z z;Np5+h`YIK=aXYc^$XIzt$z!us!^e~ud~C9^9!urD-OkA$@+@0$Z(w2Cg!sPQAmUa?=XPYXFs_9k z+rSPiUB{#kdWYfk0EPI)`Taz<*TAIL=&bL^5_)(AJHC#eqXsTBLRMJ88-j4MD3Z1p z%h-=$9VD{FSsZzl;G#=((=E8}5#4l&uG)mREqqzEv&9>KZvzrFj)~pQ=W`s>Z0AcE2jPShYHy ztG6qwwWw&dKUZ&6(rkXFUazFy3@YWNa{H)TJ1u5_pFhaW?PH{Llf%2#gL=vMe(;e3 z!SOqIk7>XpBWO_&xF*DGY~kn!K;IHfI|e*q7+{mwk|35COg8~Mc@Xb3gnJsomIp2# z1XIsqGckI03J)+3pA#NFje4q_^0!LrW6dvbJ`~y*RpG4b!tENvZQEn*hvMwV1CbNi z4%72d%~R0@BZQKr$QE8k2S2l#o?g6}@tt4PwcnIK8}m{h5h^WlP41`{ER9(A!iXCmS<(E z^w?GNX>+=DYqLxDn0Nmys&5K4IEx-z#?Gt<&aV?zXaQ@iunm4VRS-ss@kXoxCqt8XR58w zR2!7kn;xouH+$K$?AuL?AL3^Zax(_mDZQIvT^ocxO27ap*!94nwZI{Az!)uHmKC(Z z$5TZ9lpQdy5g6hK`f)g07R3QA(+Lo|09f$=R>4^qM;^?U6Bds{mk%PVZS+c2Usk_( zSEZ$0qx_=a)!Qszv!o2C#2U|(cK}-Gqkzi`j1PAdl>^q zS>4-7)ti`R9*!s?3>;?8OGh^@Ika2xyo}t)$t>HzBz3yG>c0l7mO@9J)=b-`GTY8x z4*+h@gkRsZ-@q(tY#ukWf}L9>ERw;8U#1Z@xIq+dAY&_>u^r9;+yy6iV+~Ix;f1?d zr{c8TDkr*$9^<|45L9p0*Pfde!U*+Z+FFoxpsR1*PrrOUtgh9qq}r*Z-0?)ET}iD| zS+zr1z4N&`@wr+*xK+U~%9Y!apctn7dl0S;8_<{pl59LPM00kHDqQJ@nB zY%u7WxY7XrX|Uidgm)T9m*A(5L&wR43h0N%H}8n=Kh>$fO1Fe07CI*N_$5x_lcxjI z7eaCt!m{VWzi(ug&Bvv8qGPk2Gr}#3!%TW-!i!5#-XB#6&N^9xzU{1tp`DyXX-m;m z7>?+kJ|7S};Fmh#-7JV(y_lOn86cf4?fln4=V(+^vQaB9Wo$pOD9HjO@Z^=67xXw4 z_PgW`dloO@E2wdeoG)G5mHkJxBga)^NBINWX`P(7MtWEyE2>ox(IN`y+b4`3=Wkq* zSU>k!KaT0Q$J5fyI(kyZoL?Zp2+Ty`@3m?}OdAr-8p`cDh#tg#@1B0IzG3g7QQy%? z^yma?e9RZzzoWxG(~~}nQ{Kx{K8q9H^S$o#eV*hcoRAx{KNH45n~*plnxGZF{QPuAv9A0wid5(tjpVQRn- zC3uJ&G`blwMI+2H@yk3c5P@&*U>FD3dmY+I9DtR38q1Z10fwI|CGgMig7Xl;d8ptV zz#2Gv64BT1U8Vi1;q{yE8ZT4bVDY_Pz*C<*i~B+f%~_AmT8qrxh$>i1sHLWtt|es7 z#3T-dM^$=-dl{q=3<@(HES^1zaMvyD@lELPOdI#BrNn>f^G=<`6_P>=mjiR>P;J7v zmGeQ8d~W7sfd5M{&MVBB3$3HS3icRGCoY19ta;NjztYFc``u%u0p z(?kkw8S-svap-8Z8y#|;8h7uU@vNTlsb0r6vQeWaMdaHB_T8T77kJuL#=W~9-XF?X z$3zy{!Tx&S@Z|4w2c7CT^KV~m8XKIO+TA+ZUEAB;x``frU0!|d9=&z0-DM7aMRtQF z&SM1*L*W(!1k>3sHjE*!?Qx&|ZZ8oQ$hmdsWrD01=_20_Ikt>V2owr>fPX0$|nXQ+?5``huvU)vc-x z{Sxnjz;may`tTwS#P*}Q|R78s{qotJ5(~7AnB>-GX{+ESH7e)xBjm+ zD+u~&vE~6@dM-Av!@k-k_Iqb829;5w3l;;iXV4Ao$kC%p2FNHoonhY!$>*bk`}qx| zY(Lj`@yW)`d_rBnXI_$ic9(PhVnE?aT-8Qe^-B2HYP+Hccr{M183*l+G#IP3TORiw zo%X5%Zz9iQ3g*!zE1`YcC7eHu-T#n@eu39rZ&&1`azh(xN}qtjF1~%@i?*Hsa-2ZDm{Y!%QhC zBPt9^)zjOA>CqrCAp|-IgD(L}&B2^z1l#!hVdeF!NiD5@4b5J40Gw*CifTWYSXI=! zmDK>h)T^NhFdfm*9#GaCR@NNTd@-f{YE8#)7ILtQT}%8I{_5ilso*9rGVM(8*2O4OuFUcGI4 zt83jxY|T(eywArhi;qPXpX(fTTYX@C35G*04*ioJO)J>%o1rzdh+2AdH8m1EU*67$ zXIv~F{`(5Rx*(mcUm9#MRSa0TeJl+*t`>O z-tBAHglneP@W!aTMxFT4=3q< zU?QOF?>>>|5P5F>n;9z0458ruvW z2f}Y!$TU50frDS-;8*zmBoT_dgQp(gXh$KGqe!|qh$jbr%pfl4flqJ(IezOrNOTq~ zx**K%g%r1X;#HIa6cj=ukkRAlv?)y1YEU*gq>+)<$;|Fx=e2Y5z>!$bD`?;qGz%(Q z1GSNiLs{3XV3)OR+8_x;Jrys;fPsbYA2m zKUUi4G`Nr9Er@M=bMJv*t9n^en+Z=i;QXfpQI{ON!HdquWX z!3ZiQ<2|k40nXq2p+fYhmqnh&-!RAqEV3SL+JHf}piG+G48PkTn#>T*W(EyLkPbL( z!5mIDh0~DmWe8*nY$tX8Ka#$JsnPuD79D}X-8CV=FgSy|TS5{DB)A5MJ3)fGyAu-J z2@%}Keb)Xi?|bj}xShRKPfbxL)WAgRUjs;0lTkfmsIVi?%vzr44GCXO?x##D@@CGfXHLuJ6!~*<{DM3WYU_#|zox=% zU*h&4Rj;uJx7jCeGvx2H)tKSeeB~G7*;jQ;Z+>85(|Yv-bN>tW{#V@1uekd^@@8%d zO7r~^G&GZ(4GBXDWny&oW)ABR$Cc%Gs>-@lrGu9>!)u+?3CM5FY)$ zcKMIXv%jC7{{xJ$r*^(_j(=&Z;zV%f!n#)pl##5?$7=3sX5(mNhPN@@-?lvrQq{F1 z+r38+&^;F2wwlliN-3uW9Tz3NH&p}oRRec5{kP=)>za|9>R}b>;*XPq-*;NhaKiK4 ztTZIhB)qgVvkhM`eB4EmUTxu?qA<^a81L?2&rWYd2g1G6#Z6%4*yG^5^AdIFh1f^9 z?;{XWXZJl9S9p8RygaUvAc_upyq@5w2!4ye1)8(AxNvn*fnS)T%aOg^fxXSXwavD* z?UtpL)D!||GWo)I+~CEif#HOq$%2`=)WmYb+!YBB}6D%}KyO;RGYux@#&e2_#;%&z1`)uH$ zoqZ`eg?{NP{s#8u-?Fa1Ls)Zee?Y?GuYbYa{I#HKF+J1C1aue(dG2I!I(a>dvXA8* z;#%YdUFW3kQ(~X0aO}Kl{E|F=LtA*$xcq)#?rwNk*&&#zsF{r3{!8cXm(Kp(n(RpT z;AhW+Y@SsOMe(<@+vEkE%EIx-sul&IU6nU_ z|81f}Tu|HWGe*)_+FT{koIe5^Vxw*opaB-43*vV|{kF0EutZeqotfWR}Gx|oe`i3)5 zXZ1~1O)PiJZMV(s#86@Xtf%AZVaH_Zg&LKbdSNkZZZ+BxJS|HblVK)RMKhzRNiKlymX5@cdip`In-rZ;-0^i|?725Y}(% zNBH(v*rDgDek-c2@C(t>^f%BcZVIbj&1CK8@MX9rIj&8S*Sw$8xSrLziSFFN_v{u7 z9hVHsD~3<0qi3AK#zXwD6jGDpdPDTFcMSY8;sC_-N zZzQeE*Say+n@jeq;{{bU2bHvi)K10KE+sP7iyMyey3X^vu8aGw%SRt-XWr9h-m^wQ zeCdWfa!(lq-DdDjmSrc0+QBv_P)9TIiEgQ-8O70oi*Rj3xe8D&d{;M~gA>ivo@HtW zw1FiD=T#Ti9apzadzT|;#3?jL2*kOE$BhT_*2Ck@<4>1NKNJ{MT>7EtnH4h><-LqR*cN&4NYeZOy>+tHcV^|Egko*ocAnk7Y&VP zUzp6kFoj8W)(|SJ`Lw?IsJYo>-|Ok)^hr5(`V7KaG=D~%JAp@-u%IA{6?xld_}v@) z-Yx#<0a7(n`627<6D(DUu%=N99el%Hf6r0J^n1?r56s=Kn7d!{u6`qIejs84ZQ!OL z#LbvEnZnr5;i)~>@Vp~z!!e$)ekjTc z@_~#fE?C@Ng8pxz-7@4ZpqygbieqPomXZ=4+Eb~bx97N_=(XD(n0=B%_;$5d(U zD6@3fv9w(=Q^Wg9rWR`!_J_7^yVlNPGfQ}Qr}WHbjLathpn%ud$YSt`Nr#>3;VnzP&k-^rRv4Ef>SlD1YyPB z{J>m)!>FI)@3}WW0glK$`;9cbgGsQ`2V1WAAlq_rMgy2f%kmrL1x@mNXmuFJ1m=F8 z09cg!#7toN+_s+}z9FFcbk%Xbulc4q%H*rro`FGdh zZ#_*z#2_yde`BpureE!F9Cb9RuJ<*yD}>$|)I1l}yq(%6!}MPg2d>KoZ_7Y3bP5o~ zcY?8ZE#vP5pqe%CKpDCvcd7Dg`XhtQ^x!v!)K-hDC+O(n3=E1)Oe?LeYHh5D`bLB& zMlELc<2Ej{)-GF6Tb*4GkZuYTLgDVNQj-Ue=Wd8=1oFn!qAMbWk zQXx%gu7bopA+k=092t>+L=qj5`VI-Ba7ZgFo{$xf9hWVh zu_lzvn$nQGXx9pCKy6)2eQP|mF_u#q*0!3p{jGQQV}0La<>J?lgTF7y{<5zy(wKktY&mb7|qNEoF8ZI=~T4O|~y%1=ZC0QOdn}m9KhR z0;k0B-Mh)H3UtpU0lj#@t8Y{O6w8&$Bb1CMVvvOuUCiy{`ARvWOY<>WLQY zaljuCDEAQ>T8UcEu(~hu^b83G2FcpGEZCPhx``cJpgY=gcG`4wK5=(b&!ENieb&}aT zojADeTRE&*K#ycGXK1=&X0vPWvSDFA3xGdNIwlsAfI=8r3_dsM(lZrmJne|Ko1cjr z+e=@#u3fySnw1yKDG3X5K$Z%Y75Qrl!sco2{#C9F@XUAUvk%!9pU{_ZxcV8d_?&kJ z)6KWs>mT^5AJ8@7FaO-Jo_r)sU*(k*`vS-o5n^3DpUFSW>w=}p8M*hYwo_H#c1mW0 z#m`Yb=k^TH|m^%V1J_Z=y&PH8h7=krgdml#k!kj$Kguk84_% ziHzQ~h6T*XNo}8^y7Q!@Ns6ZpCid+Yv>aoWKQ`@tZ-+k*z4Lh9MEvMY)uxg)KAXnl z2lCm0>oO9L9Ysh*loNcJ+_28>_<@1Mftf@gYc;Q>Hy)zF0=4}#ulKrW7~bvo%%xAA zlJE0tKX#G8BcpMS9*KJZ?a^)dTeaqYV-P=Hoy81Flo! zd(BNYtj#xVtPULP)@-b#Ru;Rq<_9)b3L9I6oxRG=Nnz^<(v<4fSG~TmT(`6ln^;en zm;>w&fbf96S+{{@^HXDvu0geiR%3?a^g{gDLH5EGdGWk-UY+R{2YkCEE8E`=NMD)x zsJeAbi=v`eS<|Jc>OQL#$;;UXg_OMl<}rzPT);gl;2smXySc2DY}RxpeJqVNlExd! z5YA<{?G}jkh%HBj!h^z=lTyJ!5r3D^c$D9wD1v{sSy|qBQ8jSMX`ZVn$PILPrsZd; zSBG(GY>%dNMb->N)Qp7jdV{+b;)f5>aI4$1jU7=DrtgYJ&Pbz*{6S^z;2ELi1k)(T zh?D?s&%j+!60ks9&R^uSmIl7N+aAR@3GtE7q1P7G?|9=Bri~+g27kR#tmfRx(?M zLu-e1bL$0T^GO49sIU@K>lJe=U`IfYH1@(27!mD&@ayRDbY4_zXtt8vrx#!bgQHMG*(o zu9T%sa#HtY&E!Y!GLNuLs5j!tQ-4~?3tI~-Fs`PW;)Vs!wAM^WvD31TQ z5Px5rc;7vAOCNkk;m>Eg=xV^Nle4AzIR^|E!&%yQh=0(Lrs`oIb{ zYSuU6>gw@zUQ}pkwbyx0F2>F%3&l6JE2pGo6;xH+iUJQGgmnWpaaXxVx7Z`~f;Ag- z1AtrjXIKkWUrR34ynWc4!(YKEKI0GH<*r_0y4TTVIA74fiMD=TD2n86;fF6+BiHP9 zMHy!UPg_CLHw$PRIL>x{!y&0*Cy%$A&p*s(13d`>x|2`e&8P0>u^^*&3+fIE*z!`k zyqKXVV=Kz|sw%;GB?n6LStUnV+<0EqenoG)pbfvFPdu>Mtyp3XvYsAN(;Zbd99J?H zSGky6vz@_K%@I%$mT~*I@MfYVnz)EeW#XaX0 z{a00UZ#l~!+tTHQTbZ+_JLTu&`J+w~$y`E&&c~ zY&mCSHg9MKI4~eiu(;`ZX4Lx3P@tp7(0Wp?q0z^CHMtnMcvdXAu3Lgx6(pDx*d_Sn zSg{hfp~CH6;g9dKenSbbg9bpqsg z(=d3??!Bfo?Uxb@{fZkx%SIDQMw3e?Q>w(-Ws>yzLo`Q;Z@w(-xGC+rF73D|>%XIP z-BLO)ncdf1fG)@HTSxDE2X8w^Zr~FR-cTnW*wU|^J3r=ker_E8CR_O;nR-96_+e?_ zmfa>R3UV=mxz$QDPsj5fT&?(i| z8fgujU5H!)n!z=BS%q6vV3w4ar4tOqRC?0a-Q~rr`^sz_* zGV)*l4C`mC;sfsJk+7)3cS+M}v~aYI8I+r>MEAO}MBW-&bW+-KNMx;H*y3EKgg}?% z(${h94IEp7=Sm5T)dKQ7p>7_>loZk>#JbI*`pv@1wSw9$c!WuH#|7kLQk|@Tbymc` zDCeG4u$9F;Wtr%ry7#ta_QUe>hqbZ$k-nRj=2J#-a~z)HSKJ+2K9E#Bn^7Y{Q+ILo z2WaL=PU8is{kF3Ap?2t=HuxZzdN)4%PBQy;P5g0h=bQZC=f&=i%l)4>;`i&LccRG$ z&deLu#`n>kpOU?w63Msa`A-v)FVdk~c8`h}?P&(t3SosjMQUh5&bHawiQU{rZ5_vL zoo4KummOTTUENRIkxDltz)I(y9`FdO$5k&6$kPwLs1Gkazxew6hzR<@s`+>)|Mth1 zyMO-DXKoBV(wv3yjD?}p5{6T=DP!ZY7sew1|5}(qs!Ghvm(9&qOiUI{%+xrrq1m*a z@i6pDKxBGiAkx+2=sw}->X&P1lN_E;3`dPG#m!$3m(=|dZb6P+R^+UxF+$3XUlzu*Ai*#X`ygiLqQrm6UMS zi)mZsb(>|>oeHL`oGCA*>=)GSgBNNM_q>dEQNd7^ag^nar`4?&?70tXiobri{>RUw z-`|P9DEe;~YK91T^?{`Jn2LdZNub+4S`UUoG5C8t{;Xl9J{_}_8kGFI0mnR>ZX5R?bzV`3^Tv_`%z4mo{;r-C^ zhv|`PdWVvf;A;gWe~&*8=pa>VAfb?mVQc#_8^;NIrx^z)v6I`DtD6!DIH3o0ztONmK5j}_)gHPO3XTB>lNF{hvKz+XCf zpD+7Rr213|aFgmI_T)Ww|2}6?kuxAo<2Oc@zjlw&eG>KjDXAooJet6qNo`onV9#bU z=JDK>e5M%B664uRdGtjhM_kNUDq$>^P?k!m;!=vVoFS>8ZdBK8)zA*=Sw}U@lWNLg zG3BrT!pb=-VV#z9BTlZpPA*-RjssQ>!*PyNoX`*0%u`19?z|Nj2)&u{$}=6g2gGgijS){vg2OXg5s&Bp&Er`2oe zwClZ)LRif#7EH|MP2uf@OB@59?$dHj?K*8;n%2`=jVFZ~nnVrF6d=)M+D|ORjI6{g zoaU`wl`bl=%ku11Wwu0tSyN&*fevwrJ-)%n?z2>Hvq3K4{Bwco6G`@gaQvPtf4`!9 zpD%xhIe3GUUSLLdvRY>nsN~>Wq(dldZOmU3RR-2{$FRl{Iitzk$sF!NE`KGDBh6*6 z;2BGWoRtdhLJ@zlgfU&jTqp)kt>TG`eOX zqhvavLXup)nZ`KAHbVD%Meo098@U~sd{{aBet!S&ukZi&w|D;oTk;<_|N46V*Efeh z6f=)wBiGEyTh`KB&eoS+>BqjgHw}}I!l?&gx2mE?Rh;B&2?LJ5j@rCWXlXs<;M8tu z-)G}AV&gPn?KBPUdrmGpZf?h(h%4|GdFgrQ>2d3UxCej6muk!D58&|x2lzF4pSPzz zUhI7N=g%Mi`R(!N^|Yngmc8Y)mC2L^MAl*%7B^Nluqy`!sqo43a!s991N}Kuvq>}4 zNi#Kfv_bP(iH2q(6g$l)6caOwgLMVcnrLAFZ8^2vb#^&+LK-s%mGrV`MG0?jwp5k9 zeww{;ir%`&*@tD^MJ904PTyvof54o5%vF9WmVGQ$i!!}$IRQzKd(74iaEY_}C8(v-u~w=AO6q3#cz&t>O%@d@fGSb*p%Y2*rLhU@|BcIX&QAmlM62M zs;aI_;poHo>|5#9*WwkXx(#plecnz{=j`9lj;V-sK;^#Tzs?@wnf%v`(SO%LH0Js z&7zDPQq>vF?2BfPrScbY1xrN!avpnuz!z6GO6vt;GH{`N^1t3){_FkC ze?H&-`}_TWewTbcBMOsqIiV$e@rB)yr2dG)vB=W7gtC>?nypmoZhFHBQKYKwI)~kT z-`u-J$tUUFx4pxk^8KH3=_l#rZQtl+!^Aab>WV&bRX2M_S$t%!yyeb9SRdIVKrOzg z>^~`tbTb4X!beM!Y-HA9VJot*>9cl#!aC*Xw&;dfafO&750J<+59Iwz?+4$P53gRT zBkQGh75V(i>s!#P-y%bPFiStH#9zK&ef$0Kw~t3}`|4+{Om^)o=gm##txRSt%vP+d zw(K0&tnGo--}g+9p{4lWeIXdrg@MVcoyTIlMs2E;AMI2*1gKgoPVq**n}m zNJcyoj^7XtZ?QWUImDSM`vHCM`9Ea5Daa28AX;!^f{HFu+evtGg3tETM~lQ;A0 zwy>0A0$X0xbXq4m=MO#1EPdQu{In_lytVLgUHoNl^M~^Aw;TCi-!FeXubL{(;sxT{ z!V9{?@;bm9E{rr1RXiPA1jc`xDfA;O#2M}5iZ@~aj{dvCeLV;z>rvQ*W_x<&?-!Isd?}NfG7t*h9 zWk2q>|1!e)5Er}(1CE`g*vfp_!erhQ7UiZ(R#uA^miyw&!HaWa#f{`Dr(nd!@x~P-*xxM!|2HU zVBb~u@a@Fhhjr;U+3HvM+-Dg>OwMM#%x?}V=nT$n^(!6-DIN+VjYb#G$B;KuYPZts zwsD{w%h=1~AD0W|)gn2$?~*fc#Tvchj9su{;X8T39KWCromEd>)r?+MkKd4ouB!(x zs|LVFENT^6Izn;9n?3-_}RIDOSE+Z~wm7@mF-rJ0A~;xzU=HIrP91YqM2z z(`7T0c{5m{8uc3h$e>&NTvvqmZb|j5@H9)%(85`nFpK@^<^Fh-4Kc)pksnmzW0z+9 zELuyG5MeR65Ir~>Id_n}c!CqF@+I=@4SCj@B6A%sSkJJBS2_EanFs2d>nxz9oxH&w zJ?8G*;N^eO*aVjWDXFJ(k>` z#F)bH#U$=ZF@L41NmAD+rU;g6h0E1~g$n*$31_aHH(SJ+D`YQ~b0p>LwQ{z!lqoGD zFJP)xvMIZuTtr|V74c5UjVfBBirFBew4HG}PPsjojeVD*q5JNkyW#%piNWhBhPXUW z;E#i^DIllWFTXdaaOgE@B%)*?zDk-*-b}CE#!&b0^*dPlZXWxvut`?Zp{y9Zpp0E} zMlaaIr}WWt#@IP+@U&{|vU=pQa_F+M@1nHtytMm_+;v;S9n0|0QC~49>gv`#H>?MJ z1{0eWGrJK>hebOVzznxt5l8L_xd-CU>~)s$dA{)zo$k0(oX-r zGx76y?w8}4Kj?+O1^T@4^_(&>5L=rs*qE%^m@NS&Y-u`fYBFSKD0=d|M(=48`DH6J zpb}}GtfhnXvf#9Ya@)h{b^f$0WP>ogr9ZYf#5P)2t^YzJmwre61M&f>-IH%`#KK>+vS7IDG>ab zPj2mxYh*?+qF(0d=_SG;u%`p9z`vFoR^OXI=}V*zrZQ(R?3sM-GzpSaD6SPO)d&}> zxbx+lxeEGRDQlWUn=WK5lvC#m>*fpS%SE)M+{*E^vYAxM7M6NY$UH3J99IfXsv4BF zf|HsiCAnEa?l@zJPU)Q&Oc+}_Pa9fJ1hq@VytXhj_Z7O)AKMy)>kT4KMC6Y}l}yK$ zi&M+RDU};p^;|hG3LKeqlg1FyxzBb=WwJ+dI$LyRNz*)?AQV2!!0* z^X8S$t)I8rXwMr3srnuqPW`|>IPll}j30fx@0&wErGvkBGk;BZ{S7QlUwZZ#>djl2 zz<{%0X*_3cG;e7Gnj=5o!rdGlW-O@tm(ba_U)o8IiYgL)QcAB?&irr9TZ=6A@W*=N(Km_mT7NdaE zjE7A514j0U+rQ7le8XH}!$L&^v`q6Q!i7@aY#D2s$et#_uZ%e& zWsX2uF05O?m5-$rPo-9gF_axxyBE{<3gPACpVaVWm5nErP#=ZzN?;l{%FE$MMwxj3;#l3u%-LRrVKw(*?(0ywek zQC1D8Y6sy{k_Y5exJX@Gx7>h@hE#ZhL7w;BE3ccEAVP(_h0(?bw03=dLnE9e=OD77mN?2qFzLK(q`Nc9R*2WxFk&GMyD!|Mf6Rl?}nws>k&WPL*>g-@jmlDK_n z?npjsIG;0`&z~kS#|oI^`Rs{Y)+nAiiHDPO>U3VsXhzj=Ld|4a)qEyp1IyYbFn37Y z{UZKBsbIgDze^JAz?aY8&2K&|79Er~?^e^6NM)nR#hnqk!oa+iV0=qp!QgA+aA;xg z>yp9OrPI;X%ZXJ>X;sT<6lo@X4a3{XZ8{`%9hdhhDu$FbeX`0CMeVS%WRIgIsm|7NZaZw_G6gCMFp{{q z9|Hvf%+$QpL#z7S{v|l&d4K@X*Fc|NqJn;}EBGAsYcu;Vg}CoQejmU_1chwZ z*Bb}4(9mGi(6C$2uvJgL@!4~(ovE-G#X-9iS(s$$>!&#y@P)zoNb6L0UnzdM7|mCfkNrgf&%yVI$C8MMJ{ z@<3KqPijqnYUNN$9UN$kfs$ud)e_Kyahx4k4HOFZNuvGY28ii)zF>>UThDEPA2tj5 zYcLKIsz(z`JHv{ELHSKVgl50uzTlFf*G0X-MMEJ~(@{0kv9)^cT?79ZaI1i6AZ_f*qC!Aftef@)v2N-X?S9^8& z{EYDXOLgwAy}Vxr1b+-S{Ut98Y){_;MGb+RGBZ7JuwSw?pEd<{w_)E4L*bJb{4o34 zAe&-yeGt`z|FQKrxAyV4s&E%_v}+43kS~hh_r<|UU|pnhsl7$UGrd>OG#h&YMwb#G zTUS;2(({sa6@F8NfyizuaeEig1FPHM;~TKj0EvEpg)#eg_>Jp=6-d(4ytOmP?tq@TfN~-Kmt!PcC97w4iN~#)7sTohHnNDMf z(Oe0>VLiWPzp#D3sBxFX*&?ua3fY@^ysdoBW+8LAfHH$AA4@9fiz@AUUCm9Nu3Hpo1&yePHNjLh;cIx1{FkY?R?#*_4-B}&=s_>@3(dsv2mDl za9MG7g9SQdD`>=BdV{K%=dG7ItZyM({k^~Yd;bXW{hg5h7XkVAPUhe0i++X#z6YwX zhldL3v1nx`bGP4cuw1Y*pD;CFY(PEsZpp8ScE+PzKh!GT4z- z<=fB_!EKLVl==wryqoae1x9*UC;hI`u+ioCnXUNMGm=ZwP;tSH|P1V|E88DsZ_Rtg3)bW*!!MUWa!PpjdG#TZB z(R>o6sU52Gv+eN#*=Ba~7dz%B_C5CR*CAr0j4Ms^H`A5UXMP#94Z zc1$%drkWpJA&jeNODb!LFX>1u>4>WuPO2YErcS1^W-}Ys^IEnG8@Gwgkg6L5rWD7N zV)MC$tx)LJR8-8>c>N#~~ZXc}JHeSNC-nHxSiPc%xLFs0%O8 zOUOh|k2`OVkAXg4!hOGo`2U`p{8wJ(AN8c)Z86r`vzqOmiAQ|8~)9mym4 z;-Bkfcp45&M-8qdOl~Hvo)rMka22kSWf+Mpds~SR_9wp#!X*Fiq`zTN`?YAEPFW zA&jBIJKPvoPYGdH2lESpn+YL}#jl$v;ey%-c6kW9HjGUPqt%5{xsfzs9HlX~zAcg5 z8e7v7SJM|;*B1wo<;-RZ#rWp+g2v7K#x(+8n#WqrVTp4Dt7zd`j&K#vnL<;BlWO~; zD|;fV1|rM)LTiS@$U~7eJ+CW=!qh)cgi|KtXp@oj*+kA#3U@K7L7dho%@A#53pcWw zwy`angtmQB`%yvD0Wg_!+m5gzS#Gl|SEL}e$pD@rv4>N=bkr=DP)*HDou@1_E0MKL zpQXb%Xkyqp!Q3i!Q}1pdTU97nutGplSL#UzSS}vm8U4}M=X;?4ujw&=6lVRF7WX4C z_!jl*#@$QlhT3pPbv}DOY-~7gYCLIbqQ12;G3_^iEvg>%xn8A%CBeinQA4ZzrFo^h zZAqv-HPee<B!n^;d+y&y?cLrew!t`%?3Xs2cNg#xS7K62;Q`;^?EP+=;Y?d34hnLA0IUxRKwm zkt{VgEit=Fp?*H>~E#EOHv@cFaW7kWKL z2E#@Ma6bj3O`oB0(=$DqmQJOmeyyWfp@mVQjX^EKCfQ7%jC1GGgShp6jXhyqlQEoZ zL|u%-Fe8jxg6LaF7+8!OUr!L9lh#xP>q^X;0xglFch0houCq_BvlO@K^4rX#JM__g z&h9OM#+XG#*6L}NM1`QM6Xjyqepvh-VL` z)rq2Ogs&@_gQ~hhDh5KU$70B{U~v*rHX2bo6;GXxqfW#zMxtob@w~;9hL!Y&)r_Vs zT#FRbu$IYNP2;U)G;U+s_H$bg2*Mp)%RW{F2@BUHz=%5}cHfqhInl7Yd99@ttNS!Y zN2gBDNMvF?X5%pL>;}l;90(I3-1j^X$4C#k7Ya@tPu-E{9;gdgwtAr+eZAiKd4B+H zF+bn0A%Wk50zdf&-g^3+I(zLnAg8R{h?<&JPoD4%^jlx(cNn~AeEv+R|D3I>Q?8+z zt*t>cdtP9nAFr!Pb~MKu8I^fkGvg4|{*LT)*Ty0b+DoevYeQbJE58OcBuN-piUmWf z)wA67(_Dz@2H0n)vUZ@b-V`d}Joz>g@THT79B7$#Zt!Ad_TovVSdl4JqNPfV1kNP) z&|}i{0ZID6d~(-him)gQXJiHh%Lolkc!#4kH1ljN>2a^<1b-Sim??~63Zfb8NG3aq zUlk6uwY?#_t0AhD9w{h$%`FV)mc3@t!?`WdP2EY&-6>5?iF^S>Hip?4MeUBG52rCE z(glk-O&j@qac%=x9&8sku9I3fikp`51=Bgqo)mIJL@6h@kP}$a5?Im^STz`4IT2Gj z9#H{dok*gL!wVeC7>#31Bywkx_{$kQai(xByIGnokft|EQn})^hRqz&9=>@G->{X_ zw3pjQCA z?e2c;<#~egkb9sMDAXCk;|jdy-C!|?di3%7@XAX~dI|9T6zKmkAmGa9rQF?X(+M?c z;~o$HW^J8x9qocAPfMQYR%mM#YikyQtM~yV(=#86#_HeM^w7N!&C)te#Pn22d+C zVj){Kw9}qHqXu};lU`AAzBF1GvniU{6v1kUd5h1>4!eU7TkP44*@{Tvdx0I{*ungsGh* zu_{MhE|q9lwr;3$V0Uu}oziu>;yy$Em?eXL=^nRpog+C#Lu~~eOIQc2o@B2aqv!Xt zr?)bu)>8(T5<16{=`pD6C(pw*G$FFELW6Yo5n8Ol7lL66(pp_2oWfnr{``pWGNw+ZN0k3#W~Q z(?=q>6VdGPDAr^&cRY$c8PA(f=FBDX7Lu5AalGZk25A~kn#NvD<*lVQZleY2RK>T; z3YujEk&@V^BDSBFcb<_l5}hEdo?2kgpcSL@%wJQJV`|ZB?=oudyyWOEc0nvVyGxwi zcicUWVTptCIQ4Kp_do#kSoe7e+zC0tW7`3_Wa~a*>5PW; z0Zhc|m7j*UmKM;ZLNzpMwYAyL^ji(o?3aFHQ(*pAnHuGq8qvUa$=kWq)(mI-Jm1P7 z&)hKS*^}t!+JX-MiT%`JN$k{C-0CTM^Bljf%vn=rZ=GgupJyFGSZ^{^cWFvB$d5UA zC^)!>n{*5a9*X4|o2o1rZ`Tz$i+fo!+gYRQ83WRk&fyeBpl_zDPf$_5Nc@vogD$il+_u} z?@ZvfCvaL4=!^&|HH6Fvsc(*=iXz#gDXkKG<8p4B7~8&v>t4?jEn`LVIn8hmAc_%G z2C*vr7**ah)++|rm&*60bp$f{f~kEW)PZo?Xbf{Gia8KPAB*P9B(mpH=~IdHnKu&E_OgbWTnoCbtl9QNVT{lPT=SUPUKL?3pdma%IgZCCpgwXx?g)E zuTUr`yK*^NtAo+fgj@jL1>lqL-^zknRY#Zm^m((seyhGgyOC*= zi7DI9uCc}+Y@mx>tNNuB#xd@B(M= zU19)SI=RhI-lstue0&GBHE;JmZ}l96Uoxbp*=vfN?bF;%MefR<**dnK*0+}0-kv~q zeifsswvL6%6v$S1ilcR&C2Bt{LDdhA3)tG^;0$JDSw8fN7n>G%sR0 zSFoa`oR;aV=ANWxdSpY9ACKhCt@7rvUNPxDbgB=#$&W7b6N+B4+e0}05!``LT5lM0 zA{J^Zdm6@^WbSH;U?o8)fgdthk__&8R?7jQX(v~-pDU6PyHq9Z%EJEZ+Rlr*j_dNo za2s1d4z)Dlg^Ydj zI@i{&*L_aae%7dOzSUIV((9MROzfr(uO?1y z#7ZFhF7VLb0xfO(3>G&SFw~acrOF@DW%n@M;Ex}0dsmnhW#+6bQ>?|C~r!cC*#yV6>3wmI6%cOpXp(WN117Bb>N; zt3};DG0CA#)gkTt$d0CnCQ2x;ID}FX$l`N&KEfVSi#%XEK)`#o$J;p?hzL z;cw(>q2}8e8IoUrw$ktJIrQ;$2tcSx@n$!&BVg zM`gaGFajv8!Sx*>_1z)roE=YKO~%n@*-kqn7M&5Ru)c8v zK0oRZi9A$4#R$22%<(w=^Mh19_wWSPgdB-b$JEUoE_9Y`T*u9whfN)YHYQE(7A+{N zZcoQf7aM_@QK9ZrNJjXeaVpc)D%IAZJbhmAM7RE_K3YQup6DE1ZAPe_u*{p6g)Fu= z%n3Id+e;eTN*NF*O>f0Zlv(R%`1LcGMsv17OyCAO;k1*xbXeSgS{m%l0X76|e?gfu zubx}c+ZVaJm!$o3Shi+P?WK=wWejhnH4<8W2{9DI{!yhBm;Mkh6G0qgo$# zN*Ib6=S@%dp%n+R8R1-JG?yIOP!!No7uv}U@8rbr%EM_z{%mTPpgCI5lhn|e2){P= zBsX>@a`-Wzqs63#)A>=nt~gG2Y~y5xXf{VQjqaR7cT8tAbtN{|h6)J2Jkm>UxevSM z6{8NGVqZpk5VI?o-WpKH_M3#QSGH)q~9u zydHms6&e6dHHxUAnXLP))WMD%gsO}2re*k2^8y*Q;Y@B6rzWhiIJlJ@)?Odl$xm#j zCvpkCtYUvQGpw;KLDZAn+M6uuO>Tm(A(qJuXR}^2xuM+V2wq3LU?8b!JfnFsvumxm zZIRGCj1h2Rd1ZmzqF0=ZPLWK&)l`vPEQnU)e&LW9A@8%aqmoW?+A42 zK-h}xEKBuX1Zrr-{AqKK(bUO=5d;1#L1ov}qG&#W;wyZnU#p?TEpwSxrjP6Zk`Oz! zo3JFySe2(sWNB-v% z-W6_5g_%1>PwZhvBpIw&?`TbJxM@{K^Uv}crryv&=4vHt=@yxq)xC13#=fNCgJ^j{ zOjn;S%OG5 z^EI9Rn$aA=?Tr@>B@4zH6i!zQNVD6dmi+rjpFK&j7Q3Zg5>uE*c559PqKvPjo?^8e=xNSx?D!&y}&kCN9^sk=AmeLxFups;2Db4m6{I(kDncq`hx zWv!g$@7~w!KhpN^Dh_T6wlAk1)q?Q_sfCC&@T|rfSt)6kT z;h4UDQi-Rc5Rlnh@+K`^x%W|k-hKbBt^DyVqfO^xW`$96*pMG0vl1@H;J{OZsq zPIO~eLQ_w2OMj}cHJ&SsW>H_$DuQUtU`BfsuRlpRk$ravpG{4%WKzdJTeSaurIGQ_=$e&8!PbP9FlVEfOM{M>)9B(0kKcB!~N@`e2 zY>=cjZ=;2P4DVsvWkoGV#iCv_ zLU5?UC3r&I2niB`1b25U_X3hmpVRkrpVQ~w`=2%cS!=$}e41T3XJ*ZOna(e7-V{YO zsi(F-d+)AS?jN?3-ma$heF-023Lo2u9$kt3vKltI9Wx6g(o?9O$84NI#L8QjW^X8} z*416JlKP30JBt9Zq;g4kclk7Z?g-jCk_VP~{p-okpGM@|z6D)!zG%It{D6p*IX6&sMM#k+_$SSpiAKMsLZ<|ox_i% zHDr4-*^T!K9ASl&;a#?xC#K z-e`V_TU7~Ycvjg1dQlmptj(jc%f0l8S4p2Q|6N$^rx+LkR5K7=_c1{*7+d)+q;5E( zc|5#fEWC9xviWPwqnQKG=TYlNyxCV^F|p!yn{iaoDllML>opJ7~~t9^385{-f((+)1~{i^D_(Q zr`DLa7S8<^F8#N$gI3NXw%Acy+-FPdt6R>sf!5E`oqEG;9(h?m;+oe|&Fjdwn@ARo z7;}O1?Pj7)E6%pg(jp#h@UI3;Pb4B7i2(9&1_}u=FYmU&^RdA9>j`hxGM|q|ep-qc zS&f;1?u?DNsh!xl!vsC7dVeWlU6imQN?Z`8P9CKV@A1YD(w0O8OX7mXv%DqXrycX4 zqz-e2-)*IKKlF-38-r!{LhIdN@RvYT;p&gjcWMVB(P2iWdA7FYZp1QQ8b8CMy2x8l z=?@bFT8ex+9{P1x`aG`ldD0rx1O8GnlOId3N$1oT`!+NLHMWO0HwL$MhgCNQRF=4v z7P(eext8;}{Pw`Q=TS}lv27o~!p1*(pU_wvP?rOynZ_?;msc=Ls+bQOUCTS&D?8jP z`h08O1T}w(to;~L_aU-*Ft%YNu5mc3ZW!`QQT1a{&0pi|zQ#4r#?{Uxwk#xduIB)O z|M5OhYqDE6QoDAtI=8cWx6-{Cx4~tCCUj2(D#_fuluHsMa;m~v)n3dn{dEBMd-PZ4mm_X??dT zqOrZDc@qHh+2KAQv)~B(n z66pMNu&|zWwE<1-A!&5y$y9tG4@de)S2YYOT7QcgpIck9!TmUq!@Zz9`YM7DH> zH9qvN&tO-j(<|<>O8IUjm2O3K+=rcBC2ib_rvX*30tN3v1@FQHAEO1IVjDjvz^NNc zX!@GeI-UGzHl=ww?$LZw>k{OIlOAv7_3afuKfK!xBcyh7y7#g=ce1+Xc^)3)M9%$R!(A9&tg`DanP;2EXef7I;4V8NPrdmhX4dR2x$N&H5h3ahBAmk8$}tI<~Z2%xr_=g zdUXUtkn34n;U_5Zsn7T7Ec1O_KbTlInp`)T)-aaRIG)lno8CB^(YTo2G@sZslh`zu(6*BD zWT&ui?*Wv~+cq;gHZ!~TG9Djfv<^nmOwbUwLW%&)s2d6qf8%C8&Z&gz)Y+HW)hPfc znTSM@!1G5MR=}usGpo*PHUR5eYfQg2{=F@6$R0OngZX5O{b+;xV2v5H!G16Yg^YV^ zg@0k;{4&9AwURJj=sbVNX(rowD$`{=(dA35^Juj5aD?M%dJD0bA} zWyBjh2M?wWAEfnG`$id?vh}G#B*d-0 zU{8NK!y%x1(S~8bazuflF-@_stYDHVxU}kUS3#T`Ki9M7zE?x0M`ONcM~z=kLqKP> zcT0{dKb~I4V*#xEEDymwFMfSMV{b%DM?^z=NFCq1y2PDd?#8d?@>_iCdxILEh1NX@ zt?vSf4iw~gRK-%td5rROdU+wUq{gkR*}LSC*TcvDB`-tx?;-^K;r#wk!AN}Lm!!Hc zPzg$HoJwk%PHdUwHP0uu%*VsEc`>nlCAkl1X}blzyIE~pFkCUKd5zbxpHa~h1pboa zPwfYSiA4b^7a410l6J!~&EfW=`fT58*FZ%>B%6#htunS~y>8ok)8QRhQai$D2jZwB zY1{!n;fNo%!wuVl`-C61#(uEIzO}%-v&22O#=fh@Zw$FDzG5uBU@WxL=ISX^rTDLf zxY2Z%5gukJ4*Mb8`CW+9KsdfX6w~kT^xo6uy@&lfH^*00`^Qx4$1mOAZ|h<09gBMb zedsF@Lo2bP8}V?)w!yZ>FP%g!pT#bp#RIa-um=4!b><{x>M&{HBxOaMzAj4x3gYTn z^4ux3tEYh{EC?Zik_Z0~ykBts!C3;6s!vBC4Z=|9FayI#v|%{PIR4s=G7_$gNvQ~8 z*TlP4@!YG^`~^wwwP~(x_q^J{?=AJMP3M$EP|I>%D+@eI(_O2}efcerOAK%54i_{9 z@~ge8i`**9AZ6iJ-|W@c>C^lqq_Hog>2XMFTR=lTw<4BY!J}7XGO9ADm8Hz`CeMl{ zkCIN$ikHFs=fO2^LLd)ZJsidVoKQ0yS38kdGZ9-o7F9nJ-wY;ok=L}4*f5vax{}hh zk}>I{bR6+@bIB97Y=KHK9)tOk)%6vI~t_c4n3pbjH8;W-sjKF*h#(oHL`T(Np zjp_GsenYeG@pF9gCFJd9%Ime9PMF&>9yGKZ@o6b$bSr*zGk#(xcHuB~=_GnZ7`-Bb zl_-hOZUY4VspFIxpbZO?S0rg0a)32?O_Vr)nml@t{%$ZPA7cgoIyV&9RuEWyHW)(J zFr;B9!Y~qP3>p|d(y>NYqRp;nJKGo2NhMy?nn(^HTa)M|NaeKUx_8{=KCboaXbfn$ z<5``|uD;{OFY>G@^=fDghU9SFlZd8{kjDDJnkt{Fa<9@-&x&e~s%D?scHjCJ5w)*l z1WzLC1paktoa#7oWeSAG^r~!H*#j1=ovN;LFK=m5Xa#PU?nfiW?a{8)@xpX&q~+%^SRq?X)mg{a#l* z3Y;Q6{Tud0g3|&D8M>JmKa=y|GJ%TrL>N3Uz13n4s~a)>Hu%quqzMdV8bkexq0T}f zzz+At4hOl20b4@9rOUfpPW_hHx7N`0jQ{+UDLxB3+VbDu^xK*D-ulX28{sSsa2B7_ z7dvQE6{P7R{6s$POEPve1~(jp84kt_`#BE>xx8oC_od=q&xXBOOL?`J{P=_4r>WqP zg>dkihCozz6Q=g#7ETgiwCtKVW(E8uG3-E3n?K8#K2DxJg}BP0C?CO{M1B&5Dd7=l2DgMvaC#iLD&wbSEahu=XgB2@6}!D)!pphTH#ZZ;l|H#6Fl@5)cDoZ1=Mv0H}r+J^hLC_ z1vNJN@hd&~e9!6zFa9IHx}MOc7cq@JVRaoL4MiSpdEBNXdP5GgA)8f|MybeWl|Nv^ zwzw(*x4gr*vfHoxsXzZ^aK)?e%8$`i!?6wH3AK}P{PF18$>_G(nC7ohb>rbpU!x$= z^lT&T`D)^e&E%&myr;{FEz3#mLy7DgCIBl~Rj{Fe=D(s0_$z=5SNLGVftdqd2*W}% z^OoCAPi{MXw8wwN(dJ0ZIUN0~6B(577iZkKEq25KKVXgfblZ90w$ld-r(s(t!4pSc zbEJxx!^5znqwu5M;Da^4tvRpN36G^=*QGb?xlYD(BXy#T`niBO#3Ou+#PtVZ`u&{V z`ZzzM+xC=_U(JTRS&Ho&4SW3F`^!?q=cUNuh0x)ph_S8cnZra_9=9rr0a#(e;j);w z0NokFjCo=5k~jfcAh+b%&aOzZ0)c(# zQJ3w;Ph|@3dGITItAPa79aj51s^NKbU2}+@SyAUxRqF%Q9H`&bzKE!Q9@+dP8i=Wl zMV?LBuJuWbhHPe24zoUm49Vfzdknz?RxRJPs@k=>#;v-IE9mv)zwj4)h^+Yt-Chy3 zW0Altt@|3;I2|b%53d^wZ_0<~h=~6=9TukROudO8-3@bnh!KvP` z0-CVrT92dt3I~w=*MTa)J(C-qHyvMEVh8PTGi3S#g)xVvP2p%`PNX3xJQ&siTijbq z?3-IIZ!KItSYXHP@S{-Fd(V~Xct^t6V_^g!ySEd%x#qt<@3T7PxisRo@WFNFC1>`j z+n9hhlt=s&i+k_y^v2cU4cp-{!@9TK6%vMTWzm*8%y31Ck3_paRqD?dJB+tX+m2a9=Q_2^Y!~ zhB8HDPPov9?QkFM2p_Fo2CQ&{mRKmWj@uHZok(9?h^zhH5?%6{IObFwb$l9qcoeg} z6~4agw>syuGUYWp=sxwHJO0jdw1xHQ4tX#M|0dA+jhFLtvR$i}?UVPOFULaO&V~2( z`@I_S`Lr1NX)bJNCiL@C==fID>^>0Eq5;q~Va%EYU`<{SX2LR~Wic#&gw9{SWK(klHi)sc8X zJh?oK^e_lp9*iju#a1U0N>WJWJW@q2O)s`>+}h^>0-(NpjI10CtsM)4bVS``MBQXa z!&F4uLgKUSjOQD?zLliD`S_=^aXk~!O$8o+7i0hcK?(v1A7h7~3qY^^++Yq5g75;| zuvtz(`=hku{}e6edEDTMuXbk`n?_x{q*tx4h+gefpacukrD61uBM-c_c;R-+9$@Fh|fM+!xl`7SvH2(2&e5^~IHVxm5WODuYR70oW=(mzof4ML52KN2*C8R^?C{Dme9R zp0z#R4KIW0-Usss{P`n6f{BQR$xxW*57$SliM<=iJ?qKcu%UP{zH=eA6*_vD_I}33 z?Y5R*i7qQ-44fGX=7qDv9rIg0My3Ea;A`;{Ymj0<9BMjMrZ+pU+dQ*$?6=1b>a)T4 zAxH9{9hg)+M6bgR_+fhj_)b#}WJnh;JL{_eEB&G3i^3CW)`>LvL>zx4PCPtK*@L$6 ztwf3+aXxH# zDSTu$cyvB&Y&mRvJ#671YE>AsDv8~YCTz$OV4pHr)kR_Qx+Fgy?G65Q`P|ARW@#FyqSUv7?^6Tp zmlrXupAtIW$F)3*2Bwof5%DOn0Vpm#z)=isZx3p34eG4)ZB1mByW`5-u;m`OGA_2% z&8a*PQxi%k4aJu6D79H0HMxxH5_V04M@2KY;<0z-OaID`fu$e(D@HjJ27Rk@MA`BA?4&@`?TA%i@MbI!ef zlY~IuL?Ess5TL6;a^nmP`B!drSlIX3z%oSaJAH_X|6~i>x(UM$gb`=bpgnQIk+6g# zuR9XBoX$IO1V9heUo?>8{Zgh=jb~Ebg?ZjKRim;AlbXsm_=XI6^8*hk#R~2*s;b#F z-JW&t{HlRmIucy-C6GTFz@H4Qn+k25i*8WkERTxYNDySSgJObu7-O*@;4vSC7ZfMz;{{Mh8URvtTzBzBqAM&u7}N=7Pc>} zo!(eFeXzp~+7gEyaG$|Da;CtUb|EceDXSRr29EL-OI#i(6n^hJRy;Y?eLg*(J5hf* zQhnK13~Zkkt!+myt%T0b1b!XyoP6y**1;air}RhRUb3Cqx%OR8U7wElJ_cA{c|05N z{j?a-KNa$6I%H%vbYuyXaQxgs%<>7a4dY;R@P_o~mCWP(Ui#P$ad?!!|f^aYQ5tj;4!OX>2(>5n)@Dg zwLUG6BiaYzfC$m@G`gWHq^>ilzB!<&H>9yAu&pDwttI$TeNbDDXKNU}-VHBck!o1j zY7VB#17G7ssPV~cY>TEjyA*ZsHTifST|2`1>rJB!Sf{BpEDgCLR3~iW= zXUXf;py5RxWNixP;vVa=((R(k{k+lbTNUS94nrGB z(fGp>aLPA#s+2_?#$a-<-6Eh3!E=s4pzax&w%)XahK@J3F8wyxAxJbikzl9!f(vX& zA+KSnn^?*|ma>2&?|gYG`=?C&SE2L|mE?D|_&0^<*Rx~o)XrJO`cA^qYViD2z{H@} zXs_#F1^s1){VT-fL3u&FKJ zx6&PAE!B2BZ=W`zc3xkgvg4NNmkuIK#J!+BS4rkGq!GQFB+VSb0?SV1S0 zb4Yw&T2mbJQI30ep;ylXZbzX7tT>CY&=4)8ZL|FY)m|!}*YCg7RC9!HPv3fZs_dbg$hprcyEL{Xm6-ZVFP%r%Hmp;s0 z4yDJzKKsgb2nv#*_1Mh3>z4fsTWr5Q;gcimWgr2L8(7jdk+zMe9bm{nm06v7rTX8_ zWq)d9|2&udT_^v$PVyg$W9`>HVae8h>he

KFjttgPD;xxP>E}f07D_W<1RybVwZfJF|M<+ zRAQmXq}voye;hZRyJ}Qe7iOAn`pwYw<)xyKuT+SgOUjh$g1i3?w?WI4U|J?Br6jE; z4;c`}RDhOM{kSUikP1_a8S$h6b&H_QDk!+sRBb4$Q$tN{XQ;l@!+%gsY2(WOrPiFRip}Nx5U;BBwnzEzUk7A#r59J$q4UG0k|=aQn2}l7e{q zB$p$<)P7xQQPF~ed>XTsY_}(l95yw#WSAsCR$Zd9t~`SRtDt8VT}QQ*=9Y`C3&9I$ zKf)8$1mVm0{L%#l_VHO+iAiRaUl}mYR0mpEl)JD(wa6r+VJ20@8`>0X#eu%{){@f7 z62X#SBC*GcBAPmJ%EY*M(+tFxQ1#Fmw=+j0vZAD0>~yg~A+Af^Wh>j%&<|Gz^n@8L zpwWWk&}SMrx~V851`WBp-DgIfiFuAnvQH7Sl1^Xfo>*Rh3`l2;8qY@)<9F=>QG};? zXV3**TWD9ZLV4}xZ^+1e`;UMotO{mea4if+D`FexOJ|5dVGIHc)@yTe%S#Z8E0IK3 z@q!XspxJq<{{WBGHr`fsTIiqoSQ zgBQjV1x1W5$eLt^pK2Pxowha}vE=G{5pBLNgO4K@a)uksTuGkRtV->Q=h6#qwK`9+@ zg&3SAc}9=WDOH9@bWKT!XrC#sAueG&{jF-^3zj&sicM3eTa!6cTI#mDsji0K6$J}r zR44l52g(*u?y6v&I?rV?ObJ7I!D3?wUxFf};~tW)^ycZKgH99d2l6W{b)mz%6@?K6 zT!hE8CZo{@#^z#zbq=d5lpZm->vYg{NLKW*KVqk-v8xR51BQwab%tO5h_#M8fk%Nx zU>|S-h#I-pkpSEXJPP~+*ai52lR!$+T1OF32RsEF1TMH@ts@D@2C9KK03XnA6u5x7 zKsE3LupW2=H~@SDoHu%{V>plw6aaSuPXTWO?ZCh>YaQ1BHv(0_df))iGnp`88sG%# zf%U*XApFX;j*&n%Py;*#ybWkqK@Tt=xDR+4_z?IG7??tQpc+^OYyw&UZR}b{G%y92 z3p@hs1H!MS%)mUL3Rnxg3hV;>Ks#U`M;hQkU=!d2Y^iGPH|^y+-D!WXxc}PMmfH_R?TG(;;J!;f>9_l5Uk?6o z)%^Obr-~lEac$lMv;JE8SWfuXG40k(N#FGT=T#?qHjQqpo4mfNCjD8b=bC@qanGa| zDr0>Enqv+|zdf|&g1wi0cJ6!Y7Ckce@%#s~|8(nb<~_Oa;W;52MjSco&8xq+G$wx4 z=Z&%7-8JEFtT$dj@|NTq< zb`LzE#f4t?_H~hZvm)HHl@vG~fD0pbL@I-hdYs?XVtf~DcK=RXm0sOKC zEO|&>$hx7d|H^vrf0Cc1{dd1J&>#R{J*2D|I_7@wdymKQTBJp{)|)0D(l*^?j2la+3yh8S0H5{ z2_yl+gTOla6}-zD`~MD}fVT7Z|0aKA-^&m2NcIKD`u~}DC3{X}&&8=clf446mmrvT zgK^6~1=))rJd}M1ve!U(DSHrPZ$e;y!GFqIv4k=+GPNN^`9t!+E5AA#bt=M8O(qFz z);KaTn=6M^j!LqZyO@k+I3#mIGMm&DdS>>fp@B~t+F|IPV8MrcGX150{^RkKp7t=B21uV%K z^G=x6&QeVEph=VAqECM;%>rhQ&E-5JZpB(hYS~&xu~wliW;b8C=A=&YwIcq>Z+h-@ zZ23a=o0MoSQMUO8h9EpKM#>s0Rf16+8oYTDPuo ztOA1b47@9UYJ>Wb_0lD(vQT`BcCT@)-DSYrysrW@tzlelT4~;s_v{+?_pS3ivG;Bn zcVfw7S^d&?kFy?M`rC7cJ(x1$hDo!Kr}%ewwn{VS7n7HN&A#({`Ml zr=B(MJ*=JuZ@eK-d(Ntm2|Rs^Cy$orng`D>=9&8GqX}zx)?c{k<#%}|UHa{ zfzeAgj!)B8HP_BbTAZeBoxZTR@lR>m*q_foIQOHp)cc;R8uZux=~-WX{O-Z?uSx&K zJDEM+YOPKOull{LH$VKhU5}=Wd~)48mmHmvJod?N(!aAkG2*um-}hGdOY?@Ll|Gdp z+heOV%`^YZ{Ld{3d+xdQ4@~^_*f@XawPP|z3`#gQx$>?XQeLZAzW>_(t}`cQUv5rL zQC^NHjWU+5atd7~dH4l+k#JI4+LiX$Nz-S?*^`DR4^L22z6n>1xWXPQvti}3+~v%r zP5%`4CqDcn4?ndFS>gFfKm4R8f9fxO>NkI~34XE(ezFOEvI%~&3I6TaNybk<{r>;Q zfqh@EnITlYes`#5;rT}sVyi>79e0IlRkfkos_#RzYJvI?%?=#6KSayoqfPTyhG?q} za_*H$;xZ;PTkm96;y2;qP5nL!>i1qWHLX&RqOK!ds^jQ*4 zEm}Qc4V$1N8GP#qTgzEs;?$F_jIh?n!TlaI@lD#OzgV=a-4 zBy77yOIQuQZwdR*qLr<}{~PFe4EGV-9}xGqq;JLV3*LVN9zU>;G~7sK|CBg<$S2_d z;qT)QuGIU%!R=J_4^UnvgY9oX(@x5?3cdpMKpAl0b;@!Me9jEf63!=VF#c2EGxuH9 zUml`0q{H_F+@pv)7U)a7V&csvjl36yXi-tPZy{bbY0e^UA?`fhxq5y_4mf5~f4$)G zJks|7NSlyF`m=$fl;=2fYNUgfr-io9r~{s{{oDqha7Xc{iCEyLZtfNUTiZ~|`N0bnig zH=qG{6W9kF0@{Hd_rV9?Vjuyy8ps6Z0k;5Ez}>(@z*^vMKm+h5@Bwfb_#Wuz4b?6O z#sZnZO+XQF2k-!}7Wf;m0oVn61bhWpRw4_49Y_Gi0hz!&zyVYOwZH?wYT&QHE5JX2 z_W>W!287)Y4Zy`f0x%B91m*#^0(Sr&;4$EDKm+h5uov(HCxNJXC~0XP6R@F4IM&;Yy(_<%OxtY07#z%XC}a05^TR0F>N zeh>Tucmt4C?GTN-FSIbNht`wz?FiO;d$S(dhxH{JXQ2DC-rJA0)c%|;J{M6xk2T*5 zSc4qI8q#3Ru3e;E%nEA^tB;pzm$3#B$9dVItV0fCjpApVM@?iMY9#AQSFmn0nlr1( zoJ+lmwWP7E9dWISHXikyrlo5c+C*&<_ZUpkrfSz{)3i+PI=Ghm6J}^LwOLxWHe0)n zn-At{*K0Ru^SJBaChcZ!JD9KKY71Bs$=3?BLT)=)q&c)(v|CvPDP}dKlzR|vW4)w; z6%!Y0Czafnutd9EyFNH)uSMzB1Xpmn?J>H7)!G_uEh^>-?f2S~+B)qI8fTVn zDJxhwELq)Ur1pu*5v_uJ*+Ivi+l(q>w|{El2rcJ_gSA`o*Z`cPj(6phb6mo3t4)Fh z;!&a9lJ8i|8~c%R*noVCtT5yx%GsKnz^3w-f5sAFwxdp5D=DtA~F95NX*YEE3I&zPD?&Jl?@gLFtdzO$?nXY{5+?b*CNgxoWeEb)tzbT zl*#ECIMlJCf*^FpRF_+*H+KO?35^Kql|r2s+>I3TzNT) zS*Q6bk?j_l4U4%8jD#Fv%ga$DcAok%Nme1|iq~mj>~C}x7v!j_FcC?c;)ETiV{(gf zy0+#8Ldy#R%V(z|%P%O*ysZ5M=t_rb=W|mCr8m^3o*+R?~3`+XB8K;lb=I zM9^{)6RHvujMM@56~WHLs>H-#_lPQ#i6X~{KB8(=uybS;X90qOld2Mvy1PdQJFlop z?3UZ8s>E*SMpcaoj$YM`l&WAtpercmh*QFXX&6}*OyS6G^e1&omsAy;E~y(WP#(;- zE2@IaK{0}98`UkxQQdMJ-JLvbfYJ^DmkdcoO5Fdwu|$QLX=jpyFw1a z8R4k!ibbagiL4sqd76wE-iFwl$vK0NqfWgBxs8*Q3caiX2L+2WD3nbTIe{~8IkMl> zlw-#!!WeLyY&D!+!f3d=gfZYYrN?k~38Ufe62^erWVYe#5=O(_C5!>LDU60QAaJJ3 ztZ?P(6h_n4J+NjMR{JAgU-6xaFxh0M$~UW1Rj|5oMdlsU4B{nVpnL zhWNL8?34- zocTG%*<&M5oaU_z!QDTx9Hn3jNSER6lqfl;FNTYe#4NC~m(EZhhJSI6?DR6|5BLOE zlIf@T92~2Ay&17isW`(kU;%WRv_CqlLO)y&}p`Q`sURIA7D zOuvC^LbW7d8ZaMN4BQ7i3Oo&L0QLc&1L12!wShnqkPh4cIDuaPzXtvSybLr0hk)aN z{GuLbObrYNQhdj&4nlvt9_Qar}IlKL(X8H>aA_EOe%1uxj5@v z;$-Wlx_4sp>3&o4wQWJZ*^5LW*UT0?U&XcM4~-!HTT_;R`$?p+KT}nMV6+$Zw-)|UD`=M^F%p0 z+yu?p{QsxDEAXnKO5+1Q4Gmk|r4A+SqOlt$*}Zq>-nn;X?!9QZVWCk{vMvP*Ar-8zmcAbe|kd0<&-$*qt% zEdaJ1_JFT*AYAv{fFCsOXUUisC@3geyQa`E(gOv-)wdRx78r}5w6-+QxIR$egU49x zuWvDon*#+Qg8)4WtN`Q|ml?)A0jLA90CcX-%;~?IG8{y?|{rChvg=5KdGJ~X%Yspfwk=#oT5Mlk=+G^EVk6O*v z9_ygxu|w{g?s0d8ES4})6^gMd_Jht~fvJ3B8{UDN$UbtI>~vrv3g(0$u8C-}oqR|Z zn$6}5=3mTHW~4RQinXR&@6)U8mG&EUJfF!0pUZFMZ}AyoskmQsi;0fwEOu^pHad?u zFF3C|$DO}Bm$?hwTio^T1MV~KLHDTpr90L8sVBV~yp`T2?@@1$ccHvdHu(Wn8R7iC zDQ1zm%6tOaoklOAyQrVUI|g=FI|sZO{&5xIf zrB0=D*!kEUbI_yAAFh z_Y?OEce1CvVsE2Y=RM=?_uln}y$E@MoGnx24e~a5m#me$wDFtvo8neYqz@gyQ1vA@$_XAfI#1ZO#s7k-ONP;@#yP_ohLut7L=x zK+aWZYFu?|h?7C!O8|d8W_Gbw`z!k={3>3;AL4uYF+N2Qz|C*O9&uFk=@0b@{V7a@ zg0BZ0f5iF`b?Fn#$cPBxb&zi2Ms7qX|MPnE80jGo(v$jgJ*FY^Hux{Z!+&DYY(!8i zXv;Y`5pSk@*{jT`hzP~&tpYuI5Y^%Bcq+Mu{F2O|w~N(cr?}K9aem<1Zi)Jp`ja}U z2Gu9(3w55~6Tnlry$J{*j^?2sg9ak-t1(8xayrgZ>@+*eUT!DxC43uyoIlUoIqVNc zhH@U?2s*W&93dZ&yUk5@wSB++9G~XJd9~idUW0#qDzox{F6V}73+B8~J2$RCbpV-Mef@58$=BUh5;q>!wKtMVzCYNnXi znOgzjubN+)^R1h#!`A24L>f(#s6!Xg0=kNBrp@$adVqG(59u&HO~0YhYzCXdEH;;| zU={3cww>){FR>2x4(n%=?F8GgQ|(*qN_(gMr9Fiwa0@hlG0)*;{BHgL-_7^)!~7(l zBrX!O1QtT1iQ7a_JSG~&v*Jb34jS4M(z8#*=i;{ld+0E8TnDUG8r8759YuSN9u0+4BYR5?RlA*uA_!+_y^ za=$zwPss=sr7lpjl&z#nRU6e7wO#E|ovIJ6?R1T`*7J3y&I5Tqr;V1#5dXPoE?R(= z0NcKXjgIiPDfUJ7llFr=!ns%*J&_^YZzuPduK*KXXDzckS|#56P=ti&ATp!sMq z%0_F^2DAk|jk?hL=otD8O~;qwD=^0juf(-@H}1qEcnp7oFCnwYL5tI?=t7!D_t8W2 zefklNWi#0hZ=#$k<0X+yE|6Jrxh#+yLN8$T?TCFsCnvYb-h}umaE&;YG4(3zYz3w4o<~J4ETLOISTa2@<}0Kf)NL9 zNeLv8B#~r-h($Q@ND4^>dzMa8%v3YYOgA&kOf$>OHgnB{iE^{TtTe04 zYBLu&w$LuJgLWxQ36$FvfYU0w#;&#N?0UPwZnPVCBX8o(yoI;&Hqg-y-pRXoH}B!S zypQ+u0Y1ow_%I*gqkN2ygL6heM2Tn-BVt9Ih!+VWQ6!0EfrKTv@I;D81%#)I43R0a zM7GEkg|bKnWvN^z%VmYElvT1?)&RTK$$DVKMzC+qvPHJaHrXyaWT)(s-Lgma%0AgI z2jrj}lEZRDj><8gX;lDF9Iawhtcp|dDnTWxB$cd?vJ_XIN&#f2sdSa0GF6t!R=Fx) z6{;c?RHbU2DpwV%QdOyHRikQwS?X1TYE(_CS+%HE)u!522k1kW>Q+6f7xbcE4FKy6 zsbMvuM%5VbwxI($N=NG$9joJXyiU-GI!PyMq%F<0r&DyQPSfc+12id1XX{*@4_sBG zgSu3&)8)DX7^_NG>l$6F>vX+t(2crDH|rMN3P^6(9lBF@0it_!ukO?Rfa*a#q=&&; zi~`32!Vx_C1CBFL07ao_6oX<>9EwK?C=n&0fWK{SMh z(FhtvV`v;)b^7d7evA&G9s1D` Q{(VLZ{H~q-e7_~|PmmrN3jhEB literal 0 HcmV?d00001 diff --git a/src/SDL2/VisualC/external/lib/x86/libpng16-16.dll b/src/SDL2/VisualC/external/lib/x86/libpng16-16.dll new file mode 100755 index 0000000000000000000000000000000000000000..4d93a99345c518c060e408e10964a8573ecf292f GIT binary patch literal 200704 zcmeFadtg-6wLdZGE&?TWJWOkQWKyD}s*%L=azR7(fIK0V?zTeD*$PGKrzL_xJn# z`J*-GoW0jtd+oK?T6^!cA9LNUb+%NS&E~*=@wm;_fG7WX#ovGaCy4A*&t7|~ZPk!> z&S|ihy>m{*-1`=~=P!8ZXAAE9H}~ClKKS56e)nDXx)%f-&+jqk>_rE=K&%NV@ z4LikSk}jWQvz6J0*gie_yBn?2cH2%pZ>T+Gq-|-6&E^7kr`l|J8OTk?e|1Q+t(q&| z@k+k!_>WKVZ$9Ah(fv)TsF%&=mUu)UKK_YEda7+k7C!P)ZKY0;Jn)}6skUFc2F_xt zqde7?IY4%8eyVLe89T|pasGQ3`;oWm=coi3VqFuJkVtcE<#Wc}bEp4KeEOKgy5s-0 z<^0q8&uhzT9JfFMZlV;QL;g*8hWf+J@s7J|;X-284&z_8{EzmJ^8|lx!a=qIt{An>m1kj@VN0O!^17;-t_2|8)QfOjGw|wmUpQWElq+r`R-yM{6+#Wu(}` zJAOZJ*y_2zpNl{KVeLY+YHMbGH2h6cxzzs^ETV+x#33T zi3^dh8g~7xj(pHyYAikCzrcpF43LU%Q};RAeI8+XcsfW9dGk@2@$ADXHg%sX+!%QO zc|Q`=o)jhYxdb?yjNSl71p|?LduH8!TeHii9aYH6Q|4#{W8vv&f<~>) zfA#Zh0Vd5slGdWe9EG1QQuH&zTm6Ue5#L()Y1Ow{fyeMJO0l)45t@|R(@09bQHp%a zZ#-C&MqW|4Y(XKtb(DV82`1{uc)EA>Tu8;qM;cL?ZS1W|u|?x2;&Eh&R@lsh155yp zL*m%*FdC5|5h;Rb7eKV`$Qu{p!v=ksp}lvr);3Lp3gm{jYQr6M^>YJd&r8kmKWOAY z`Lrb-C&?0pRhx9SPzkMBJ)WwB-bHG7hZ1VTvptRYU_BnW_dBg)*6nxP)?$2hMv5&` z5?6cdi!LK6wlm3G|3f@3G)oC@1a73tmcKRjrh442gpbQ_0R z`7p}r&)**;RR84P4xHTnk9a(PEA;`j314c`vr4?L7s*W0CVgS71dcxa3&FkUq!nL> zXpZFijkB0l!WV+7V0ZM7*(JS_1ik1QHjpWBp|p_H2WOcAk3NQ62+C|fbzhcV;qkPm zW!R)j!SbN-Wu9!^=W!cn0a$I#f<;DFT>y#F09;1<@Dv-cT(OVoFK%n0BQWVb??vmu zXiAVFU6JiMH0SUaV7_bTXRMkFYen`5D#NMBfgQw$zlcnApHpjw2@HWcl16;%=EE(O zl73z9zv(ly_M4~a3o`YYncBgeO@%GW^o`I)}Jq2J*!({2%IpzGA{aGGh8MA}vQ0+)V=%S_7`X=C*T z>G~b%X4+XIZKQrvhJHte_E8SXTQbDH1^jGNe%mM%cvgNR^%!CgH!d#nUy{GIE3I)= z{oF1imeRHPMZ4eGxw&g|%u!j_wfX&?&P{>6J3A?h&WWvnYUwf#x0v#u_zqfR$&e$R zYiY!>hOPrG($Sdmr}NIxXM5bb-{WC3hIjZc&EMJprHLQ;w(wxpaOKr^p@wd)%;Qm8 zGiKc$ExZR-hvx9IIkG&)sL62ktr_STZf~iJK8oC=_MJZCW@+il>ief^K2N5;#N(|D z?^kLMfgg2=$7k2xRi5|@n_H6e!tt3OA zoS~Iu>XS3Ik}Q34mR91{2WurBeG0&{^(g?))u#YFPoDzt0(}a=$Lmu7UZhU}xL2Rz z)=GSup>9g4)Jmpm2aS*67SP*_RKMKNKm$fQh|swg+fZP;6Y`?;(;bSWaeT^*gp83!r50 zmWpmDQy~=qL>I6a0Y6>aNdGBhIuEdU>_KzNJb6kz{(xGMC|7IKnzdZdwy)N3Y?*U( z+aB$GHEKsAX0K6X%5DJXMjU^~mkqBD&F?8N-nkQ=wHu$~HTc;B$kIceARhTUs2nJ; z3?H_OGZ)&4S!Kmbz}sOG+yBY14z@Cy zANr8DbG9dQ*E~-to^I`^X6%GOw(ZW}YVSlDlFv?o2M8B}uZ9r;_2_&wQu zseKSzRapmhSNG+?n7sNJJ(XjIKcn7C{j`kk=9ECCo*G%=$pmMa`ZNbBm8DN(-Q4;# z7akscS~?!t`m_w~O5yu48msW+8W%vM-7GjTDFS@}zC$bWK*3tZ$4L!SO;j~it*?a$QO zHN%*S`k}`d1H~1|M!Hhp2;dAOPvj`!|3Z0YF4=(3u?b96Q0gkgcAuk7`sKQZTjw|ew;k&~%RL2^o)H?41amPk+Sg;gfMUt8{oOmVjPii)qmpAvU;6pKoeM}@DGLyAqTBmU~sv6ter@#D{>Px>Q z>YK^>4w3cEOs?;jqX(`pd{r*%OE1If)^WU52LAxPgfXA4_BfZFmcJFca7{<;leeMz zYHL;t_3UZ(8L;tdi~IDy7-Iu>JUXO;HfWNDKcmV)1<%pf@F!~+{+x9R{)`!o zKWCq^=weuqPdzqx(Nz&wx_Z>P=t8P&#FvqoS|Pd_hnC?nzP=xW#Ma!F2D+hG2mOV3 z&FR3$Dlz^O1Bux7#P}ce0k^_!k!#>_V#bGYXQ~(_y0ztAvtDRFc+*Us!xNt;yIVaQ z8E*dsecIycJq!w<(eT&r0k>{_CDBaF@_;?OIt&+xYN{ldiTP@G$-_>6huX?_@;gI} zf1t56uVv&0STsZpYNgzQXLEidhE_S<&35hMb<7D|d!(JCgurE5SAJttG^M*G*Av;4-`dQ;&xP%4r?3ILsnKM(z?XDE26n)0GuYhNqanQyXltM{(2^)OP#dhQ?M@ z3jJjN<%521^^XCMqcNz+uPYtovlKeKs}e$+n|g%!n>(CKN&URjH5 z47@^>_}p&US(JpB$tbp1P`Z1!IRzg*Pxr9;oi!F-fm zoH3QGtYp4kagozXEf5Sc)o!%oFBtVY`RKzZie%9rA>Ep9^{Bg@;SMGId$QAWK4Xjg zoGCul-QIAA|3O`KvPO;m+b{}2vt0ot-yb`L_Moq1mhO0&jL?8yfeJ|YcE^ik0K=!k z2ONt&l8J-?s1YLAN(1@rf;b_o?{>zQVQSfP{;oGMv=U7;sprVY=X|WKBP7&847P-b zWmQ5&aJi=7K1GtgavuQMm{a(Lk!HjZjO2z%K3QC8qIkk;6hOQ0A}K7v5$YfM79C~u z7p$6U!(Xd*@62Ed136a8I*~&5td?dqHlY87!nF%z7Tzw9_@;!8V$`pz9eB5hR0$%V zB&FQLl$E=Y(k>wJf;U3&AKKu?;JPpQirLrxB=P48O1qI^ieIT$35QmYN9b%}2 zMu^``q6FqYQ&Xs)tio|w1tm0t?3VZ~Ubg^AFIjATuH&b)Fkrfg`Hflm5fE{>LiwjJJwJax2cZx!oRiayL@`Q(c;`Tbg|859*-l-hZCZSynBV^C>fM_2n@ZO=uP^^xU-1p)A@o zJf`zsyDI47ExHdp>#qdy8s6WpYBq0g)xv^4!AQRrPpfLLRPHOEO2E~(Ai@pU^ zJX-NUe<$2`x{hg@=n}g9OW|f7(K8WN@Jm0Y?Sfogs4(M(a1gyr*g&GY#V&ibS!S;` zsZX!wX0LVz8pMO?s#}iLqE4{L{?=fBo9JKBzkM7ttWjPf86DVP+EQ(iN7;e>st#N- zzU0)sb3|AQ^O`>6Ju`nWx-q9#KId>tY*=q_32#g%jP`!h(ac&WAL$rz^XbG8yS6;F zFTLscjY34Z5Rn%>oR7WRK4@%Z^#tWYrRFodD)o=1L}tW;$A&63?D#NyOpQ#92ak?X zYMSsJeAF>gsaY-F(k3W1e-Uqkij#0jG@?lLr9((vmn z<_Se|8O@i%YfbpaTQ4IKBOGXEr0oPDTV0n1hDOVY^8KvXU| z36uFWX*iq>|8GjMtEXuc9!4LZT2G9sab8E_3QOBug(baW+NtFJ>3 zg2AR)+$|_hYeR5=Q##is@QbJDzFE;A5LnIg^6*?DRN6{|ayX5lNGIOc60c9*HoI1bQSuwBTPYIJC`x^K%J>;6N|;VrsrROipMoI$ZTJvv7yF=(e}Fw} zU#{5#WC%9$n?`u`>V1!M+_>xTEBYiiSZ@!P0~!C8wTCOrH|n)MiGduaK8f)lhjDs2 z8e>uh5M*Y$%yfy&XD)|fhl8L_nV>W=KY8djt`RBW|HQY<)xr*Fj6TU3`8!#G8nuU= zNFhdh*oL=f#>0SF-XVNIwdRmuHW@|_cl-6wghqc^d-xtAjaW5TR84Dd56?wHITEz+ zJiN7wawOHh^qF?}57n)dfsm(sHRBp}(FcIdj^EPHfArN)v;W|f!Y`&2*N40PQ}xF< ze#Jy=vp-*7I~(tjEX{sAmR47|YhkV$6UI)lSY7pXfI&p}GdKc=*#*dE!-tG+S@Bpg zKjz%{Y;4|x01W$+ zQ`17^1|QL~%6u#=8n8Oz81k&(sOYt8_8 zh#Yq$hKfU_63WTaL-7Tqs!7`%S!qPALJ?sV% zty$4gF~Nt+ok$ss6jPt%{52O;%R#jQO60f`+B+s7ysm^FLyxW0>p`%g)UT|@qv^9u#GdV2kV@vn%W{$Kv~Q_CHg)>+ z;Y!U<*!R0`intDzVrsapDQM2Bqd^K&m~dO3lR*#RHV{ zfpTFI$^{n6{DpVlse})skVuJ-4dTKpo{k{GUTl~S7%SbY?Lj59gpf5Ir1HRn z_svs6tkA>-{s;d}330YG(ZBF6@Z5@5FzPFNLG&?Rrp7o(^37mdR(QOyXYJ@LZLf9^ zOEl3-qN1gJh0MijM{GCO$9>P^Gxm)%d(>Aun!lCR4-x91am>J!f(9?`5%3QXeuIQ3 zelCiSy(+)Wst%XB?X#JjQ7qAikT`L{gLg0VdnVp}=lq5Kvrwf4^Zg@|3T*`f3Js%B zE;2w=!y&4XNunBIiOPM~on`*ZCc1CEWu`xue0&bvC|9S*{p;kOHIcnCXy&sbMW_gb zA`OAdRz&ohTvFE2&43_*Uy~C_fQv6G*)#Bbr}_+BVZtNCMt&4Y`o6KGZXdw!Lp(gvZBpsN4FA+0Wm)w%bwr| zR1H_TfRmYXuyCVN^Cx^Ef~B^&CM+TB22scvASSF+sbA)c(Y)O^DCSDqH{-{Ku`wSy#FEf&~p)hC{a$In)3 z3h<6e3YPz?hN^Lg5*`WQ$~ri_a`mg@Sm;nfjTG||Px&Aze>Lt@e!-EFdIF=X5BU-w zylgl{u;h;r0S0;RUTBSwmv}1dOGVymX5QbdJk($&xDL~4be9Cu{io{d=90s>53Cd)lZG;1uH-x6;X*g#vF`;Rcd zgc)#jnMvD%DP-tp=(fT`3*mIKMn^)sh`)cK4LV^;xYM};3P`m6B&A`69NX@gOmTf^uxym^-L zjJ3Z*QfCpd7f64No2Btj>}m1MiO@Pu;$xwtZzM+l9U4(5*7w(ONEE%3-!G;I9)Hp4 zzhOvcG{A3lQ)!egN8RK_(p`9aG2QPpIXz8%i>YNyEmFiZMcw3x7Mb5(Jdw?{MH9h} z&oTIfVVLsd{FTDY#UMEgg5?$j&im=5MKGH??C=Q&X-ipr8jH|o7@lRonPnAj_hT_R zSTw>G-~c;QZFOUwn^-TB{ljcMHa|cSMyHIp{2Qc1G^73o@O? z_d9@NvP|5Cn|5{)7R!_%{OPxmDfTYItlN2VuaLBtPmW^GTq85L?AW_=`@(NfUIn7) z#VPqa=vP*3fq%rfHZwo2b)s3vf_UdJ?ll6|1Sw19@gnG7?_zEC3A=4421{LO2Px4; zNm^OKA>qz0F4I&2erKl|vxnnd2CCpy!ZTOncOz>fai(!2Z}wJ8zD*;@113Qy*Qr-jP=d_=N7C^Zgf_0G;%%Fa%7A4QR??P55L zHnyQFd4e6F{ae}}nz-=Yw#o6l!1rx-Ta-R=XJ^*|{7=aDQAg~uuFZkMon2UIR^xUR zCE8-kp%7jg1eb#^`T^3zH&BEwKKfqFg}q!(*mw#tv1ri+!SMU9ZZQY+M(!6c&!VIuVp!?%L9VnM!UNA67?H9T0MIQko|dGO|sys zi=YedLXgV(o8yt|%=0PVTV2_^%V|pxUu%ec;JA27h=BAhZ*G% zMiA}h>$W31(CkGh#1=gtjT2lN9~Ze9BZK+i)2b68(6YAZEGF(xInotbngWBqSPB0O zDdGLgUJ#n#^UMdR;}g1g%xeyw3sdY&J_WvGp5(O)9M-s=y|`5y)br7kh?6IKDo zSO&YOZAGE9kC*XWPZyQHc>`q-OVPGzov7fEuM=`;iIn7pchve^!~KKQ6X}ZYTWqlI zRF9@=kH)H(7YEpCiUo*pJYa_8r{DCuN?3UYGLWQ5Z#9 z58a8-twrOy(rkaHgI<&kgBU||7$eOg3ucf7bI8PV3`#+dk=tULF4`4(CjvEWu&d64 z!|ofeNBQ}U=y!^^rdW+Sz}yQER{A-fn03j_c^-H2^v(UriEj@uj$iH(`rSn=C!TrIc?j98O~cGdP^KhZ{)0Z5$|+!;1pbUCwdv168CPNB=&y1 zo7kBsp$|4A%EaCb7+_~g>~#{G0<3+t7dxvz_Hq+jCw!SFtNJMM7cGPE8Gy@-6r@Co z@~h)^q%OP9e?@hi`TnyCn>T=4+tN!5-(Nb#eiW*aWq-H&1TzCSRcb5mg48NC^&UJ_ zjveo40R|KyzU6h1*&^#0xH4{b7N0G)Zl#c~W0N9~lAP>r*nVu=-fudhhv*eBItaP+2`~s^8V!?DP*_vkH`Amotp( zCSgiFa_v+Ur=MYPd<3%}T&Z3=b%=JE%AMehKNEk=uYg!ty@eZ?r*Q*wHc@HZ5Q1BP zM!AGY`J3^5FoH=DCl1-9fHIZZ8-b;sKoD{!Ub>qdewVVkq_ps$65bAS-OX+#{4HM8 zJt_Xtk!fP@R2!xBp+E9Ji>=N1f=#7&&cQb$WEWeM{Z;= zA9?=`?QSnAxDCOO_LA|x7{{-o;AB3$mqDA_OMKU1>vVf6*)kUG}I-$A`&W$lI>3eMWM&9w0hl>}xf3vVC&Ap6fN?3|+o`qt1H}lx15^a}Oi;$~ypdcdl2brI z#>Nq*!}rxz(9a5zQ;YSR|53QtKQ_2D-3IpwvJgThgyX2A&|%|ukA~2B8p`T>mDQ6^ zp8(9jTL6W3^n3K{zncK>6~~sE)9$pi*U*l^#lviYJA;c|wg4Ar$Yz4(Jtn*UQKGTD ztZ$=Mjp ziOO(u1uAq0(+J@6c%q*}mX&q%Ump0a0=SC2O7+pHw#9A~TqMxs&INpq2ZqzgLmU)t z)&&}b4zO&28Kp%b`1f$MJ-0CLmKfN*745hi(Y|aLfG@ZT#QHa zIwv|XI_@2lK6AhtKVv+4=|3Njo@D$ySo9Y=J1M=~#QGTLGdOby$B;6SLpY`8HPl$2 z>cF(P_78Y{Qw;3B$!RYnlVk7R^- z>@0KfojKnZezR&SF9i;%DeCvI>7#_LH%Q7vvm_pyQzU z;dR;3I4MtbR6?^xeP@m60vY1mPApBdh-H`-o}PkjGPz@mdE|o1?bM51V~aE3K}pTn zdRUObsK~ztO_Q5I!?tvm1E5U3IExqp*GWp|rmSB|TrsHRd5Z*YaVDXDR90mY{58_K zWRFF#WGu=R+|lZ(Ld9|j3%8=dUM>L|{m5BFK_$SZyRbM*iEyoSpfVlg*5vWfA*+5$ z=tJ0AFMOg-DP-0ZM@tg;9|4ZCvIToTV$DO=o(4EsTTW22HV-|1aaN(BL>@vCLGn5B z#vp(tv>E5&OUw1-v>BuDmeYoHhbOqhkjR|lfITti(Ni?BL&9O?CvkM9D|oH_98VrbSeDaK*rxpA z1AN-ISP2`IU$ih`TlH~P8s4Q;3EhblzJZg3_JLC|3H&?v#6l$^fYGsP-v@?`z%q)|aKk0s%mLtL5^lH&$LXBT;aYMXB!9CBxBq~w z$3_W9srS}Z!p$MvMicHg67HS>;O-&ZZv>qGVU)?;68&k3krfKZ3f}iNwa4ziP!EaiYL(TcI7x;Nc0q_0SMSy^)T&h5LRO)f^YB%M=X^ZN@$}=#;qhWT zXX3d8&)HhY6C`yX6xv+E@IkLbo?4kY7q1MNMnKP~>q%5U%=wnKMI^suN+rq#K8}aD zjyn@sJS9<~Z8v5D596Mp+IA)y4~w?LDz()khI< zf|&$iiPLc^m0ygXW@}v{oNEnOh+ueHInwoU61XaPeGQq8-s!6HAB>VDpZ7M$FP}_w zV*IiLBcbHT+IwFnjbeV%XB0EGe^hOtQ4HE&1_I?6#^m1t|Lu&F#;cG107+M2lT~!` zW-Dw%etYw=8Ajxf*ka{F+#HytLoK;nl^JZ{?9>^#12x%w; zX(Nz^y7RIOr?zQUw1q|DJn1H5Gxk@;J~PFZm=C*kwGNam7h8a}W?g+6DeWR1L}?3C z*Ki~+0wQDeTI6o~Ivig*Ccj&EyoRL-3%eUlQg}k*2flzZI*?=RMrymDNouHa=p1- zP$Estd>IVt7r&A5`7$)=934H3UMGZ(u?*wEhtPw-ro^s{aWoagRVQGG$>%f}pL*Q6 z>^f*dw&)u5Cm$!%TbG`WzRRIkbBmb<sZUyyQXhN~6qNcWU&3R2vr>$?ZuQI7yP&-2kD?avg|?gy{hB4(7PA0o zxe~_mo~?*M=3FWpi{MjPaTeo`LR7%c(`u=IN(kE!dD}=5re-c7THh5*Z%9JIZD;0$Puau$xA{c!ULjPO>xDrE0xh)BW ziuo;Ka9AY6Tmie+$`E_XN;>|&Tdoee`=58;c`lf5#{$zjnwqvTpQ}gmBs=y7FJrFb zzpy@q8&|#(C+y#Z#p5tMpfZDa+s3mZoK-SH!81Ugc+%0oU*|l zv;~jsY1*rBYruA8#TuYOh91P{8KvF1ZT~r)C`EVF6mGB73g!lkYLK*pCB|8oAr7O2 z^2p$}*h;FFzQR(reHi9Neo3p;ny}?+C)~2WLg*zf;hDu`XkBqq>9;%P#^V7adMm0Z zI}@}uB6o=HJSNBJ*^<-Pa#ljVM}G_Nkk7sj+~ncE+$cxV@b~CH#Q9Y$a1RqlI0s`u zjCH2LDvzL6)?tuDOLLTu!q#f|=(kUS6~WG6(mUCIS@wojd}2N;3;tIySRfPtMC40x!#1m0s9=9%d;kv#T?o8 zjT*(y1ynCG_Ydk1X;se1+zsjvg;k4jkm_sY{DXjM>T$sHY(=jgc_6jTF?v?5Z!`jK zHB7;4irV66b6j+rdbB6--?{_gFMo+%l;C$4H)j6UE1;3P%cv*tSw84 z`-h)C{pUg{(y^PMuyf(aoHksh)VWYWakUk8?4ZmT6xtft--g&XM>deZ>@O%YMj&Ja zy)=$6UM3b%ZB^6E_}rV2zb(HT@t$~^Qu8rB;+{9%sQR1mVm7S3VwHBc0s%E4ttsZH z)0;5Lbj$*#v$A*N8#l$mhMQ!#D>>TH3Z+d+c=q zpyzrl0ByUyF}&Y@OAdAyFDDp~!6})nwM%Mkp!O!a4sBagEEVg;N|+ml$cmyeW}#>B zMDICmSI5TzJ313d(C7Re(PF&iH2WKbykoz`lq@_5NdU|v;3X2!S`VZC^8h;{{%8$% zaKd^1S^ACTAe{l-=SrWOrV!sFhKZCnMu>awh5;&-~D6v|Ozgl9|=7QY@R37oPbhK?|q#QdL2QSK{ z7f(Y41|yb=CBzJr#=cKnV}y5yo9|%f8L)!^2G8f`0pA^FRGC>ZjXaRa0PKp9hb51D`7OKeubgLp%H*1drn+ zP!LeKWNWC|KB3Kio*q)_A6rfBJwE=ez&=QR={OM8j>Vp9^EuKv8xo-mJ>;QlVZBy? z+v-+wB`l+9Pg>*=xBZa)h*EzFXbvy@xau^vb+hEFw#=baeW7kliB5+=Hn=4d?=hZS zy-!r?*BT^9}M^Ey>Slz1$1C zJ45i~cj?!;AXzF@+}iaWA6|#6wUX^at{=`8OLZPdD_t)s1Cv8c;lw+zJ@h)Xq%x_E z>S&p$V@9v(K76#-bRCxIqDk*WI_pobM1{N&EhX*~fLTNRJ>A|%+wqUm4c`4bD?E8)4`YQazF3*WE(%@#++&gxYIwm+uSR{I}C-%cr+ZEi&QZQW*euO+rrFFnOdi~Tlw4X8!G zK%uO5|MJ`<;y*>Nr4ENT2d+Z7)B`xitmramald@U;_EyTgg-RdOwb2fCx$MT{#5V# z2bu?4W~6DLy)r8ATYN8`nfJKoKZIx2eGmHG;mvq+KU8(^0z5sH^B!7+XErZ=4W!3L zz-i>tW3+&jAEWaOJ9^o@F!fxTx`;)>u4s>xn1=c`5Hz;4vd$X+poMPHOJGZ|*J-8D z;t>-nJlTPtP*JpLUUmbbzb@6JWzo49=+E-S-U4rqTDl)- z-7IJ!usK>HJlZE4$#khkIhK84yd^&Wr)aWl?b_0q*q=PtMBNQJu|2`maPWci!4-J8 zwDK}M(zWvP!z~=&Gar7SLeTGjzSx}qQ{~Yc>hmkOFTWc6N0z#+02;nHvvPRxM6le* zJc4ousn=(vfbvM)OJBnsJkpXN!8bmz+t%C#=(R6_Ra_~OruJOrH~nL6*9a^4!v6Fd#ap+zb^Ai37iX`(l z`-dWbupV?m?Fk~iZW8`rEsQau+NUIlvoj(jd-aH_N` z*8^puJH^|lM^#1y;a{h5DwPe5$OF9s;9d`UQw2R=g5DMSQ)C7?dC*r}in^E+HnDvO z3M;qzfiUPBMIVcR{UiiIq@?S!K!Ti%s zlF#us^S{NYAkm+oMHnFxetr`>bez+M$mtU(^6%Ie!PJeS-9%>RBJIcOkCO3u*zaWc z|JcWX?~9+3K+e7B0C9+^DS?{o|Jd;1~Wc@u41=B)SGgKuuQYjl-}?+s$raZMbm?nKoY?Hjbp)tQ!#k4lOOu|CJHB_1c9 zgMjbU?D*>eqrc))Q1kr1p%yL22(8yY|JZ+>)!%=S3shV9U$xQA>|Xq2edh$)4dJ@Q z4Y@AhoDN)9bu;&WYv~PcJX$QxkBIpwWSFoQdEYbx(;oq_yLbWigK}I%8mParquBS! zuuRB_2|GE>PDc?)E=?q-BN-zs361;tOy~@e%&iT8&Pya`ie&CpLUKVOIZGr{H;_C& zk?a=9YzZV6C6YZNIUC8tcNBXQ$=N$I8yu{!_?x(&Ht}MP=ljT*j33|Ey2_ z%M#>Sf6N*sGv$e7)*mr#DVB;va-aIoOeFWI|LjC^pZd>9B=@QRJ&EMr`a>*p6UnGQ z7|aEOSv!j7C6aS3v6%kFlukk{edWO^H|0UsD&_G)uRMn6#bp3@2?L=dkWh|{4vY;h#aK>}O>64=&AxCaSv0Z3pgBSD-@6$z}L zq8HBtL@t~}p9UBGL84*Q{h-KJ^=qgg*5vLPBr-P#rH4viny@_6Ps0KK^rI|6|Zjc0aX{_Mfg7XY&=r z(8JhT>i#MIg}^^g;GbpU!=$nkx&xh;R1TlS|Cr?uarTz4tS+8!GGKE`?;|T>#p{rX z^LXeT$nF9#@E|()bU%Fzb?PoWDQYfFQG;&6U?~g3q^WwbAFo^|&D2u$;>Bo`;>Aim z)EYZ-9S zgN#gRr_cotFy65IuQ$p6E`OVNvI)F+?dN~dzw?YWV{iquv`+xS?Fb(bYc`IE;Pj5! z*A-z?N{FK>qo?Fg#;fstsixLIgO0UOF02oK-K)!V~BJK@%o{CpX%-SS+Ir zHqDF) z8!f1c+<-wJHV;p_u6yvL$C|A#?;y0~ak*$o=`~OXeR(JH1iujC@-M6pNOt*`@?$x5 z0NC^qa18qL-6FjKE3%xN^{vm%`HfH^EcB|EQR;gB*rWLpFm&o z(QaP@O1dEIfE6Vs=E!T($S2L~2R{>|~<)1UxCDI|pIi=I)A|8P1Tr)~hvJ8UwcKGWG@5o4k(O(0WiWpZx3v5xHngfPlx=7KW<54 z^MJvA{7nOEz5T;YAaFedmhLYNJ~ArR?*kva>hCl_Wk!}iM>6&Xcy+cIo9PrjdEEq3 zB`|hqX;~Bo;k0Uk{cs8~5j0%_Z*>Kv~4k6tP@Ha~eUv1rGvKtxp2) z)PuZk_%>x?bxCEwsv@_-CZY07&#t>A2Nc+DHHTTk8oP;UO`s3h!7t7U&oD{^mr> zqSKXE-$L}=jjl`n=0vO(eod%;JNR>B$^%bn%)$LKa(y-zYqMpbSPIoB$KKEA7B*EWhydpApQRb*`YSj=6Z3F} z2*3P*xi&(=8~vTQguB~+w({y>Wc#pj8T`tnH9xlCbt~d3>n!EfUG}|X8D)wt7z>-m zXUIe;nju!Q5TN#9Q_%h3hy@Y2i1mY~58_OM6>oq+j6!}QX5kl%_=gA|4ii5@#9N7o znD!JPn(~+O_M_WErzlo5K=@B647F&%5-hk*@Q0j9g0~EWlyKJ|<&{)ENqCYMz78U= zLLCr1B-%T6kOb$Nti16hSV{74N%Z>E=LJb?;QFlojJqphpTmtoFCE|mx*2fr_g+wb z52FOpl2f5`$j7_TU0g2#9ff`_mipXgMChxh^u# zlZorT<<)oJXdfN^gZA`e>q z+o{#fM{#&_X?3(ZyrpY(tREH{O!=Ge@E?Q~{)1ug#6M{-;-(ILo;X#5A+3LszV0B* zJRA>{K&vm;)qn5{Yc1F+J>{UT?#8E3aOgQ0GDZwbvE{tpgVdbY32J|x5D2mfmDbfx zd=;KhCZB*5a!%NPz_w{2b7Q9qi0cHRDAB%-ps~ji{W0QuVmRnVLkv;ZvIk1_p90F( z_u%%`CI7{(%~rGx-RABAE&?0X3*Dtg1>0D(AU7rZxsF# zTViT624nTEa8uxrzLFSHJtD4@2|DAXRd=UR&__B7o0XbXz>KWnxBfb*i4F5`Ne%>O z;c`@_nWK6^O9;ZjxVh74JOv|QKcorx0DVow}APvEd1XYeu^+ z2e!nptK_m>V1pf`5)bz=<1hbdLO)fxKUCWi<(>&jHDk4OpH8?Ni;q7eXw1CvX5K!; zgOmLk&sbCyZFoE^ry&9VMo=eIUQ6+Dq#S+!gZ#s{_$O_e{|!P zXJB!v^BifsE}E*_f0eLEaOad(23ZM<{NT5g7f~#`B!XSEYtBJRo_YQmy0BLm`4k+i zoqSLdqChP|dV-L?lJ!V7@SKA=hb&T>$n{@^j+rA;Aza*{brgsc`l3QC;+6j-vp1oKi|#bT`~q(MMpi!VV6hQtC61CMwIu4@l|aY8HctKwjz zx{id0DdELwmUz;u&LU-2au`Kps>RRI06>m4A;GZ0rX&GNS|?tnRVv{&kgGm1siLeL z8+PDt|*>J~?Lt6Q6f zvfm>VppW1Qx(=!b1^*u}QOtq6rFf)4Kx9zVBDS>pHvYoF4eQh9*x+|7(u<(@H{jW5 zAcTfZ#cBpV;EpwwlSp0Vran!r!+X>XmT?t45+YL_6LeaQQj;p{$}N!vV(4RP#$lYL zmraf;D&gP27IAf1lpEWEZ{r8j{81hvtdsN*lL_;Jk?5Pqei66#agQ8p7%<)9hda1s z1mh_tK4B)7?*sWJ-!o8OS zmoflcB?dT@-=C7;w&T6OTy8fc95+%?vuB%{{Z*&@{=NDA5xy_|!?NqD8%cB*tThugOb)Yg!V+WQ>Bx#q zwins`mlnYb!U}Cg*vQNaJ@Fe{2kEf5eiNA-uT=?al_UIvx{m#)qw10Mcwnc#Qol)t zK$ZG6@dm8_)<4;UN5nTcp2J_+JJMaUBn2llgxd@JRH=XITV%_aWTYYuJDIBYA|a<) zBlPz;Q7$U0gl>h0Vqba_p6Kq-)1$kOa+!X!Lq%oeLZ?xTsR4^-uVK@D+M}lxT{y$E$A!hpKE=dTqMlID}?C5=f(KsaSXhU zOL%sCT%xRa6I3nl-mL4wp(8e|)SrfZwG)EJa2DeTN(LcBi`g!?CyYUTI8OEh=)W+; zk)y!dkAef>N-FwF0Sy>NFJSTNP6S z`=+V9@*&-O2Xgh5tSb7wb8xSB&#j}XG9ab*<{Bk<-?s{9x8AgeY;te=y=(T>)8+Y<7W)`by4djC)iW`BW9j~ zvsDjZVN1xxKcvXvUn}%m&?|BTCQ6#9-Ps9hD_JkfLNJQD!MvH0hrH2>PzAJ;Q@9dm>l1H}W?8kzruwlm^GS`oPkNo(7opLil}^L^O(METJ9) zHHxhddwxezihr#jRg}`dJp`eFIiOb6!~gcm4()*peS>0LBCGN*HR`{ENN^n$8`#B3 z*h(lDUzS=#c@djz7TnKQWFNR;K;@q_%%HyfvSGp<(5WOrTAKJj)cg%@hlOH?o&>t& zKE?lLRK=In?~^qR-Q~%Z@m`axv==4x3hG>x>aUOf4lnvj;SPl7!$f*CU7Fc>2~Q{d z0Nhu6E8Au?NJ++EBr!C3^jDB(LgTuS^1rgZEj{#E(!Zgh#wRt@ztqf+_2Ng5|38v> zDJb-6n-cm9s6cnuMPI-R{l#k2cRti1zxSEnci_9<`Bpi9#$ga0b7%}23TSr=Xn$B% zy&q3)We6=5d7XbX@k>v!fYtk)d~QK5s5uO~zyBo8jp6E8ao@h|X$o~tK>X*(Uymyk zhPBXdw$h>p^p%{eplM5h=bt8jUvf1(}CIZq8v;r)1!em4@K z15l7GV>zUTzAg(S1AkGkUF?kg3EeUoeF}XNH6{2KE^cfL|Jirya1~`!t zy%~_^cuNc)h*c;CM7_8RF><0Y52_kr5vWKI7!Cp~y2>ni^!2JF@zJ>ktiEjkX zv0@uF7qMx;^Xz@#S>9eGqUO4oB4YB0pllCd7-IRDB|)G9VI9trV#wIbCjtfPCj1Jv z87oLcj&4Z`_;kwBAV-Jse;yYDq<--vp0|-@pDdolsVjbC5iOF4DMgZs*qv0w<%uGa zQ*TTZaq>tL3z3l~C7jE~?}#3Q#~3IIbZ%7CLqrch!qBES3RH_T7z0It$|2$2D3BT2 zIcYFxqL|H#h!B1a6pGs$*iyoEV2Z8sp4I+uo9!)UvT~vyW&hXDUZKGp-*YeFRWKsh z7>FMtsRhKa!+6K_D3+k;dK{uA3O1TfE^SmPlM z6bbwLeMn3Cy(z4gaY2WhU2?GkFcBfaLT#m(V93y_Dkc~r^p7JdGTJw?&WarQ*zQ6j zp__YU5Rm+VoI_u31~gLQyTOzkm|5{@kqJM3)0#?sEv-%r3~M=n z!a$A!fYA8F*(H@RRqH&CkS8}Und?7j6c^lr=jTXvjm-Q)-!#qGqMe0Ac7e3VIe{_{$TEDI{#ZHu#gIxcwFulO-;T z6YzSeJNh#;leL~VUE3%Yqo|^8sA#rv1uYMgO5DoApF1Cm&$V$>CFhXx>IqE6>^vJCxO-AYe|#-La8|3t+J@(^Paa4SmaxOl+?gM$`| zw~FE&EX7-i`!r1Zo8;yQCrroLlNwm3Pxok>*nmx%OPt04lbObdwL)gR_}8JV-UOz( zqR$bwMvXvyfPr~~Me^A43%(ONg zP$U+av~XT+hLQ<10%9qnl`Nt~{8vWTL(xp3u;!FbZ}sr%Lu#o^EyeM(@Fvs-n22XX zs%+d2?IU&fIcm>2yjylpYSV#KOuy8xQdsx;9wo%NK6Eofd38I6Mj85TE;}CRyp+%g zHX}k9p<^U^EG2L{uVN_03LR7fI|LhRU4z&Mdm-42T1TN3EP?|VLh|84syi!6DZ+-J z!!|yx7E1a~u1EAT;K82ngWf$h%VxW8^LX5fYX27BzAJ~|?OoAu?~=U(!KMRF?GT&q zklO6UZ+AvVAg;u=Xxcki%34{y%4$T>5>mikT)F}IML&jwO@C)Vu`-R}oP|tsqf(hs z9@SRrv2C-+j`q(O)u`@Ht<6fo@;iRhkr_VqU zA}^9`q?&)%u&nB4zCuKqTE~&kGy^xF&}kg`49J=M`0&VQe7w(MAq@z^-h*OG@Ou`O zT5d_iaV0C2#9#i_{LT2CTvCZ`LHjDJX^E@ndAyYlKSz+^vBE3yWR8WwYO{6tN zFGV}l{eNer{VWb5!H!;9ooV5|KE^FAyC05erIaMhZ!8{Z%YuUWQZQed9$jWm0B=e1 zefKvD#ZLCe`Q6jjEu?+z%fc@SoM=dUVbz&OKF9BQEVWm+*rfjyqab$faRBCYyl-Ir z9y%W#tWjef@Ro)fQH1I^*Zu=*0Vy!n5PU7uh>Hh)cA#>@Wx^vfYrVlNoVmoq*oCQi z{*DLUx(q)}kZ~C<=&-1W{U2s2YXPJlAB3MWXd9%qUxu5!!C+t$1~+1xuo&T>Va@vS z_InLM? zzvzwg*;i;lqJN_9;+zHEU9(c8fQ*(B-@DcZ-%q@!qn0_!CgALFrM z4nNxXAG~EATb%+q!3{Hkn~qx#k;2UO8jj7x?b-NJx4<3+G(wX#{B;_oz5~BaX?vr7 zE`G8(5J5rsk##5tepXg+J_9#ADxsmL6Y>#zcS{ON%~e9@3Dhgd0@9gS5S=ewJosr~ z1+afF{5=K*khn*$^C1PtEH~$~7x1iS!z!zTrFcvf?^D{)k>o)d*%Kz?hu)e`6NosN zf+YY{0AnrmUHGjLlvJd>hlsl`c69?qqtu_OZATNjz!6;(wt!+ZiGc>5cFo~2o4_~) zr>&uAYFp|A48N2R;~;n|TDT@Cx9+(yY{m~~oE`fM^aT}FLNmcVIq2!IGdQ;?tuuv@&vG4Gf7q>TU_acpC>NG^39QNarqdC zBxD?V6k4c$j-R7$XaofiDgqrFb|Ij`*q7za?}j$KWBQZA z^TXv}j$+3>%}@mUfkNoPB3}6K$?pb`Xe!wZgO!@O9Bg5@_>QPwu9$ zNCi$MydV>L7y$U{ZT-iv14Z;l`Q01X6+!6P*6$l>2ei&3U!!Y!@Sk^0R(psZ%IrCU zxbC?62dYq@0W`}n8p#&?PaFykAT7~P!5#4DSI3(aAo@OCA0)~S1nrp*au_|HX^tkx zO;pq6}#0n&O zBa;V#r2><9cFZC8MT)XITX_||KCp`VGaXryMiKk8;`_K#ETyqK_OU; z#Uqy^sc7|=0)W%LezOnUZU2fG(;6=2)o<)gqVAYyP*|9KH0^iUjq1;dEypErgv;f8 z1hZE$A88SD3;Z}0#yPzXGRo`PP&|6Mg31Z7TP2(=J$gAN7ZlA*bCOX3kkZRI`GAAT z7VbNAoE{O^xS998>#wb%2M}%_zijd?oG8Z&pWD^L_UJLZ3S&W=q687kFrQp+vT5ju z-$HZ-*N(AYqzf*GAyldxM8}9#7<_@BUR8aI1|c2QI#Mtmhqs3;h1(4_kP3)=4VRd( zt#B8<&_KfMG27)tX$Fi?Jq|C*MSTrs2tSYY0csFJ*VKTr*f&EI zN{EgQqYUgby*Wio$Q2qc_BO6z|73h8FM-9X^3C=>IUrF=>b;1@CJBp19nl}OtRLua zB&e4Idce9c6l7$rj1y%HvM_~iGR0%09K=$~VHtEU(6$3=JTV{%xERPDE)F%%P2!^i z#G_5XV0R*0`>$+4Q$C%heExGagm=Oo=pq=cTM0b|u-M1!A3)9+e9l9$lO2Sk6Fk>^j^{J_pSTI7j{Repu?!TS*K{C7{X7+Y2nOcLtH;q@ zatj%D0MJQGEi`6Q%0YqcrmLQ%u6|nnxVoh@)6+GHZulbAm(rLHh}c zh2GaQDfc;H^6-BP)E`w}v->bV4lCyb3!$HaI#&B75Hey&lCB!HJ#Fs7het_?? zi6_9Q66TB&{wTY!M_K+cT044<9K4AE#|CPAREIxd)AzPDRnctghtLCwVLC*V=%hfI zB6Dygg_`hzNdWzPnT59qRl&`RjrPd0EYyRy%5mpsHc?UIf_y4vE@dCNA2NpwvpIv2 zrE(Hu-(i)gzO@Xm&LCjvJf;6pb)lTas}sh zK5Q>XXei2Gnnh+dJF_8Z+wp+PURH>~g%TDU{2^w^0L;K9?&|`0IlyNQ0fE^7FJFdW z=S(HsgJE0jJO?to5_UNdR5_#-*5w_@0-BWpucSVeVx-L_P^~N%^x0RQ8DAf2=))tdpObg# zzY>5edQgLhb^Qqv2drZf_xVwLr9q^A`g0n|Q4(Z1@9uglRH4<=q?T@3ySjE2+3@m6 z-x1{}buTR-a3-biv@-Uv?t_K@r|$nf+x_=a)!F(_p?;)mw~%=RVt)u3OvAaDeb=il z|1felaRARC_g63!)HfFE^j~sTgOB*i&;9>tuwU;hRL~gAD59s4dHjx6s_vlbbi}IM zM$NqU3A?Vm+}32$9{1Bemy>pjpLSMG+Gc;(@c5jxGCyBlPTF)oZP)J%w5E-1e%dQJ zX(7K?-8pHMe%c>$((d)!{b^3x2Y%Xja?)n{W#^M-?AQ`>L3N3DqwRIU zNR%z~Ph!cb88Vdk8M8J-BbR9QA2xqJOO>c@aXM^2%|B{}4U6S$HQOFXWw&{aeFba# zZbp#NzD3>v3|p2RdxA5@X>P>{=F@&1?=ZW+{p6#Vi`HghN? zW;W6_KTt{jZD#Uly~TXDM?d!2yyk31KC-4|(4O^>+-VuKr$J6O&$G;#jdJsRt2w8k zqaiJW_MApt_L*}U7u!7MT*oZ)Y>$$B#XQ^dBR8989U!rOgmlZC8;O~8d#>Z>=GmV2 zc-TDK^CXY?d34@G!IE1B!*gcoya&%3yoQV@k69!Rb~0_ZGZHNsbg1JeWNm&*YrXt7 zH-^i+ImBU>XzPNYQruwh4BDPuAhbmmdQZtUB}*zq?nnby-%kUxX~57g_sgF9_%fL< z;*#7C{|rnmgQ7vijb0kgOCLW1pQW(ds!NA6#}hAnRMANk?O7^V^e+pKAifmStO$Me z!;IN!;dCYJ*VLxN8>iZ(bMVuCj?`}fDW?Y|KLXC>nxa{6<)qL157O_Dyv#|Q{8JK} zl-ch0=X`qPCw#hibbey|q|ZHK{?14Ebn>YDnctH*_K5lG|BFu1w2pz~!rbu? zi60%6_+=cs(npafVwU=(I**e?hsh5=eyE%S#wJP<3xmonZt!p>Tfy>@c8p8Za_vY) zjixgVUoYkHrWN9OEz>JOK*auTM^uKA)CpU4%Ey~l6h4L|?GZGcF{QaFx<4;`B`$i( zio^Kiy8Ot;_&%N2^K@6i6K0Lyu*#c8fRLiBp?I~~f*F`luN$Aqm{7+v&r4%#xtpuQYw3|kNA`lPp z*yybQb7OLt@=@}C@A|*&`zoFFp7*`(8Q~MHb9A^yhabY{SieJj?z<3FzOVdnd2-&L z+HY)=!%gdLq}ziFj=NOCw7(%7Bvzb~%?SYruJsx`LG8iR%j=myjQ73Uo(Cn*)qM~D zPHw(t&lnh|_amJ#7+9ArtaatcNs(aoR04S1$AY;(dLtDE!$&o*6hxrvczzNMi&)sS zZh}Fezt0>|+$j9z~cyNy#px0UJbyY-qt|7#a5dE2k)MVG}uRI(nLh zz_X<5H>`t@(KR3e(w_vso4F7Ne2Z#f28DIFH@c>hZMoH1kJwe|CIqiJ84>%YFE%T| zyQ{N|bm#?1eG7Dyl&Ily|RfX6y`g>50k zr;%|xfp6*0^1+v9lK%qR5Omb}hSOHD;Qgt$F}gh;rzXxw0u${`kUP#l`Q?G@#toV& zOh4O{c^tk@M76S+w?=ma!&`*LTnJmAq-LZ4?8rw$F(+d3+-3KgGLem$hoU>|{gFi4 zHy>fB1$@kG=Yt!&nMd1xrq^(+cDc;_n7)aw9kDaVew&UzOFoUzzi5O4`qzJ9-w*ol z*ZS`#_%ykMciT{Qf1ClV{o}c4ZMU$4Dt`^aMJ8@5N>nE5r3sNx$=#``Jhlnr@L=j| z=ZZP+wsP?YRxU0za&dSw47WD==Dw}04}6g0^IPT zI$)4lU5@D_Rl!O)`sTrY$_82P4i6KeLAu8jGwUd)=KXd?#sr=~* z2E?NBPX;)3Me~$WTXots0{B)L*VxukprCzgrN4%cH@WGg+xh{isa=?eqHhlFTPtuV zY7CcdjF~1NaGY>hw>fM?;M-(nJ-uHHo5`W&y_Xx-o^)Pxmn8ga(h7{-vI@NQK2 z4;SYbF)$i|PZ(E$8L25}g1@=t)tSj^%Q4nFx*l+bhdEtJ7kbLng)z}LU$0zGiI879 zonx|I!IP-6l{%w2=1PFd=o5+eV#K@_tJtKhrUk?7)}LKkWSN>!BV9KBbfS(3^K44 zvF}dwdZXL$hhu;Zl8XjvXb}&3nX)R)>EY(vO7NdtmAG<|*A-n~#CE(pwaa)X{X5zA zt>SJdilBQ1T6XXUdH(}`usOE=891rt76Y~+(``7S29w2~cc%^@P~r=0JGXe}Yq3=A z-G+Co+p1Jk|3u1T0GsG6{4Af#6LYk7xux}0ZfOj^?aK?+9?n5JX@wF@xD$H;*QZ3@ zG$n8Aj;@)To$9Y$-9K$%v)eikrZx>of=Abtr7t5vhDo^u1bL>u;4d{~sqe=RAf#lE ztf5yzXB`<3hPrlvH*>wEf8P;M0H9XKI?~nXG1W|3Y?m=p)F+VZWGixG+DbO2y7Vrz zsMO_b-8HqPbr+_A?I;Ah+Q0p8$eDm%(y{e!ECmqJbx!(P|MSY7eBKQ#mUOW~KmAi2 z=>(98X>-6D!j)Nug?4E?u*5Ls<|dM}zrc3e%T90lR;5bV7?~4HZA4aOpFe^iFedR^ zyg9{GYleOA`p0ghK)L$)m@Fwhyxr1MZ&sWP9kY&`@JHz^bG`k>n?xP@(K$f;6VyGu z{4LE(2=G@z3gjuhw@#dJ$7SS>s^7crQ8nm^kpy_${_W;Oth|}p(17z3m7aX3iKQP*a4Rb$N;F7z%t&0Y=r@7DJcQ>{*x(<6Pk%03 zybvs9fld#j|LN$|e5E%OMYj<*pY`Dtel}u+%>rf=rkNbmlAWw^oEpuk;ZDd@7qUyr zx+20O@{N4K#8Xzo{N4Qq$tErAr~QaD)g^Rf{*diSeF-qn0gA-^<;{HYdT_x^Tu~Z* z+p&(A$psE@&y^kVv}EZq_~XD5Gns#8;9MESCOyPfPIA(*PA3(WRdqVAx+}J_{f_gk zcaW^J%>0`GQ_WAQTXgh7en^;$T48o-a2*7&8UZGs2Y2aF%3x9L^rH~hP+MtYdT}y% ztl4S7{}?aiK2qzvA-)t4)~6T#=)@_ zZ^2`TkVljjZ(Rl6h1Es*IPr2Hm0oLUXMT~}aciF2aay@#Q8Qr14B4HRlH6A$TXcQ8r^#yWsF4E+KC)*o?lNoE7*{^sRA!G*!GO@>Fzf zJm3vJP1ON*#kCu=ViToFt$4vZ(Dz34jd3j1+@;!m!$)T00TEHy?So?Jb2OMOHmlxA z7&faLVY*WAUN5F?e%$bcmvUn>Ai6l>MZVSiNz7pGzni3|k%C4&c!net0Y_JJph}fw zEuU`mP36Uija00sno@7bdD&g@E+{M$dw9?DVFt`o@r?6)zPJa)!1AYsR96TC)d-hJ z_%UFwv-bLGXV0zI+xd#S>>cg{`q$5 zI*2M=(F^>#(~IU5fc`mn(|(D$aPZ{vRS?TW6x9Tdj<%UyaK z4dXe9a;csDX0T%T!(8fosuT*m{m%1F zuOS2lX;sg!)`C+h97YQ=&n!P9!gwZl(CS9U{n@& zg_dK}y>-|?cwiak?dA*$szH{CZq%@swcSn*GK4ei|9Kafvf%Q$G9T?0#&o*Cb0c7t z*Q(kwcPaLA7_9L;rfkH~$>Fcdz5Zn1dypb!Oh-&$Xm%&VeT^Rpgg@u4?s}uBf*8H{ z4?bqLZQK=PakhGUTi)_rudrNLzo`39wti9F+5y^(SCo!LbUE?!hihM6@Ebszh_92R zMp-_)&xnO`ciGJvPAn!!tzk}@jxS54vyN-`>gN}z=V{hI!`?xVG!r2+%e@<&MJh&? zf}-4VNs(cs2xdoN-Aa*xib2MDR*K9-ifkG!Ma<-qaw^stDKf`Mk?-4?B~@_%akBA1 z^gX9*i_G%LK z#w+-I2|!_)&Tjf{xcQU)NW0i4*DyrHFBEfC?KOsB_ zC_Q|+GfZk0&u>XY`OBWO*pDy^hI)Ugqv{1<@AF)N%IIGIeKKgNQ$K2{Q}!QXuu1+> zN3mz>0VaJKe@4kaYwgJjKb+=##odkFj!vW@6oH;JY8Ciz6;{1d=ivJzweMRB+*r?S zcS~aaL>^^{=COpw>GrXd#~E(yF63w%bGV&y;dR{9JE>Fdd;tb~rMt9|ER1ADlb+$B z9KTD+YNPDbyDRoM`$1o+ukuU>S2f0;?G~%-Xvf=1Jzv@RCZ~PDN{zFJg>D(SQ6j%(U^O2X{2@Bp7zyqfPA4n($h2Zo$f zCT;3B>G?VEn+^@-B$y5jf4D=ccR^?R8nx3t!F_6@_d?geY0(`8$=~jvKP{`a@HhH) zy*u@#*n0e?-03gHXOy4m9k6dxUt*d#vpM?8aPt9&zwx5<7708s4?8Iy8r7fLmL4SW zYcIU5y3)lfXNY z=2UOa!)EJE|ALYqlK&&2TH!;*vpo+9{C#e~<-{qGZYHB(o-GujGk;9yNd6Rv_Q+6# zH51M>nTjrQdXuu; zO&-~nE$cV;SXF;w)_>`wY$#FO!JWSPD>h|AI}e z-i_S@sCJe*eJiqftdmrHP-)z)V2+^MKDxb|B%SoRe!Cfw$PeiwsulAE))& z*CIQjMP#DQx zntJfBNaL^b;Y0MXi-()lA2+6J=~Z`jOZ~Pv*3|R`gr&a?A2~lghd1!;?|;YcRnw#P zzAJy0-8N@`o7)xEv1J*4sK{--K$!vVv|lh(d`Ag+LwG%eu;g3Ip!J8)nlL*>?Y&A+ zMDEEpC|ii#lXqjwY#HMhvD`dczlgt^XX_V{54@B$ei5#Dwtf*On`i46ac1@zzXlb0utzU%oqp*Gv-!S>DU&M0rZ2cl0FwfR6!q$&31bz`V-TFnS z9#Z`6ezf`O@Dd6CtB7@1GVai_92Jo$sL+ z$?xDMn=7PTO>Op~%B*j~ClYYcB5TNeFKqM6K|<`|=b_rt)L8O~O*20x_XxbVEVLyG zD3P1aU67{bcM*zWgUz@c_>ASY{*^?xW9f9zT)R}J4fpPiB&o&nr>%zc!|%YyPpWWE zW2-H4()W)_pM0lnEJix~np@=%B{ci$2R@8 zQRyZ4y$H_H4iekGZ__UvmH);c+Vm>YbNn0RUC8Vr5i$+BB~H~&ygXlE5wqXge2Ia_ zJcoJi!EVb}whe!PxJpD9!TMQ={pX)4WnE6nDwFbfPRb)DC6tr$QM~t?Dy;H)N6s2zEW};e>Oh~b~b(r z`1V#u|5ldJKKTh66=97EaQLkyn#{|zJ5F+8*$rsxuRk@9e(@S={tB-ss(7qlLV?tu zH*@vyYR8yrOWfA80V2B*ceDUHJbr$-;7|yBLgMEWCBOB>o(9b~EIHN*cg6VcHA+NF zAhuD<0yO9!>>&GlO2fS$C!1N8tGO>m<;K z{{)L*_~0TwS-6azAo$dpzEv_#^?rqq(Xz$Jncq;?q0aBhOK&HkJD(#KTmf)>Al?f`jou%zXiCK;Yr`%VhP7!yH-&wcyYE zZTME~WlWnfH1B0R#g}Nm4xPUnrrFmWXcktrZ@Lcz>G@&v%txN@G0*C^+j^^c))p-J z`Ma;X%sd}7&-LbcjLFk%p8L$RS+cfv*k>wrTYqAoK_VOM_PI>YU*Wmstw6n=&3q4w zKJWsF_JM!&RfB9Z&xt|FIP&ej28O{h=`r%M{~Etp5prigUA`=&Ze}a`>^||mRg9Y2 znpe&t`?&dM_)(z4TDpeR&20WxmWc~F`V8JQZcaLWr1P2!+`? ze&E;fI^TQ_3uV9k_&$Ia*ZE`qb{v(AL!+6m)#7xeG^;4{5$|&fc)#J$dx_q)N9ljx z48_uu4!utV;%q!*Q=i@y;mXf{BWOyaZ6BmfJ zy0+=)TQGI%Pw2~KTyf+XYJ}&o;S^-H)97?8g=#lM{uaF_MN&Px$9G>rHC6q>MRL+3 zR-aDAml{l)8lU|!n(cz1H#K03FZr`+*{>m8OmPjt`~4w!N()f6t3iMKjP^hKMD&iJ z6F!kL<-tw_p%K6GKl=((3jIMruk<#j)((j15pG7Z4rgpb2E1G5k=^X%c6J~gp~S8j z#*^1nSuX%&e&5vQ&u>%Ty7R*zWfuMjlhwX?-KZ+KM7p}7{)CdGd&%uG#%1ZQk=3KGQIg2y|MT! zMdp+MdCLKV!&9!Q>I9}k^%p-zu}qIYpXGbE6nYC43}Mc^p8C1-zHjCo;j7qSnZ`9a z#-db@STy*p2c((O7A|G%j^H=gOqeTC<%bJ3!s~^JHUOW?F5oGNE35-!|Ef?VBp(h1 z33peRon%>;<|1I{CMI<4Kdow2#VXzSmq*=vm?H}HL!rdQMc%sTHf(FnyiL9$il6w>|m4 zYwHZ!^13rWZUb++muZAvG^={%fZ9|&&HH#&+C(4S6(rm6`p_ra$ z$>z1!Z6>?J;;H41PwtKie=N~3FIxu$5P!;vrQCyGfA}jWP`f94?VdpB^+EXfop6U4 z_PCo0t7VCqbJ=Je8|A9!;T_8Qsf1d5=G`|g0$h4M$M^IfO#s0VTj|}nc zKW1`YOz-OGz)<+@%qy0jhxh}+FqlQ8bBGLP@0MI#X@ZQg9wA!T7~v!GDWYG5KfCy% z=ulAa;eU+|jfs45#BG?3^hlAwe#{5^Y`C}OD+`A?u|~;AccNio^Itz`e%A3C7TQue z%UqI8&KpU#@Tuqr8Wy?=1^L%<@xlNm>BHX9S<+1sr@&+C+1vbVkb2TzAaQiOn5q|z zh?6*|ORyn})UBr9H4r9*HLM=N`Ve|2Om!1-_Me%rZpM{XV7$%{=B`0+6%nq6mke`| zY<+Ve81OD$lyJSojS^><1--=0Jh&Z~g}jGv;Hk+==){ONybI%rFDnzSdECPEi8F?W zmJA~^9pIDSRU2eK%bwOPDNj@6}pf0gNgiIIV+TRsEYj;_x(BSpIH3bgvag+NRZhr);SNAYn*x#XKKVs&7xQ9*S?_Yw6SP`@J`YwHO@5a<62e@+f1=jhG`EKj) zcr?9j4w&5;pYDmoUr;xp+R;tXg#7!tPQ;|V=sl{PE&>_AYD9m>d}%)PM8yyK*Ao>( z=wFlfs93>^iZ8rg;?B10XePZoDz<>}7rCw9=Do1lP+1Jm{>CiH%ScJfR~Cuss$TRV zN`FlZZ{zn~0Kp|8n$1u%`7H2^l`_W0=g8`p&+XJx@`FvE&PR>ca=((vRHFB}{=3Gn z2G(eO4{n=?;DgD^A9??q|)yob1ba;)bWR$IU?>Hnd33rJx6g#4KOxop5VM0_YUn;Yl@^xq?eQIJ11)sTajhT-Q**X9BXp9 zLflCuDX;Byli1w?_)Ft!vX@HgGDVooqpS0=l$Y7?o7!1&+X(=8aj>HIM^(KQ1TMT% zzE2wo=~=a*0w0`<$0(ZNm3cXd&MG`pCN22`%}nfpv@Bm_VV~~Nf&0~e>B98@GM&cA zq&N!GX3Qwn1%HZm zKPK~$HZPT!NMCfoHr1xK-iiFJC&(Eny1&|K8FUy-kzN`t1sjv*ft<3%ULT3uuhEmy-&zTfMPe0EjrBGXs$){#|488RP9QAygn0TZS?4z}gr-e$-ydm)# z_08>o`C4CX@*ctD#8P=2EWnnG5zg?*LGV|ny4={&^ch6Wpuc6Xz(h*x9CTfx`VpDj zzDV&zt3ZPq;H|Kz_JEs|HQjB$bd1|x8X}ZZ@?*Sby-F|P8L}u!?{p3O=x*Jgtg|$Y zL?J0k7B6u&B!l%1$D_F;xyd5{*X4QfnRzr^o=Do3g6ypg10Ln;ap5RyeR1&}s5(d0 z4umi9**N?!iGPzt&cSKpxX;SV58tuKR*~OrFFq!Ioc(NTG?|nED9URG0Qx-z;_6EAiW-`AIH{@`ap(24ONcX(?! z7_`NUOKkCYX$|{KrHfBVoU3S?zlJm56@o*;Fz`#Adv^;-sv9!QNY7{XR@XD%mTQan z+-|r_sKA;C6~l~un8*p3vrMRP@BY&uHLR-Yj0f|4G_mhO8U&q~_<{0d{;Hu9Xog1J z9s@_^+1ugENIK%=PEvU{1`(x;7UYKW%2Ov|ngLz)EPn1jQ`~`4NuEh$5o>C*d^+!q zdS{T^BQ<;=2F)~QYEKh6R7l086BUE7^3u5@SUxu)ywF`%&&oRt+YhN?Qv{8P#ykW9tuiZpeU z7p$sX>t6DVx3~6P_mVC7@PhM9vJm-DTRV8Cmar4!Cn`qgq{KbKO}z9N@EP4-7HNlO zl@2p*WtrRhuM!>F+vL5G_jBy~B+;~<57YA@Eb+I}k^Ojp-?%8Vnpp z)FICjwV9?DmmW?~Tv`n=^(~W9L&=51xD1spxz)?G4ln+C)jKA*g4#*6DOWOh7W{aY zj+MZ+oP~j{%9B&|&Tev-+rGi=D7?6-wy@#WlPOhJ)gLcXX)$qmqFGhMXH9hA%1N~c zBfm!A6fmaM61U^jd^G z7TgZ6%hSN;H7`EL1ZOReUzry-5o^mdH=6OSp&Fm&Bw94C;>9&~(ED!_HRlmKkTnvH z4bOCed|r_EMbZX?eI;ts_@eS4Eez5l$_2+`I3g8E=nK zqZoE&yn&=S`LwJ%m8&c8d+QoJt!it3gZRt)mB#!=#!oJ41D?Up6A z-ZS!p>&$1CE)5fGE%Q71-AR8akB_zUaJ}1_CtQrsIW6xo4b+S-EdTR}KTqy`rRZg^ z;XcYtjJ;Y`9$%kK-eL7+Z-44{3XCudt!6z^ZGY;gys|5PT5JE}v#o|ZqVF0#*RO`2 z2itu8Z~`0HdVkD+AH-pAl)hLlmPTK!evL&hzjf%1!1gm>=BFy`9)t_QYcKh#R4Uit}k5#RoIrD4tNl1VH?xtDhdPi{;hiE%y&f7C>< z)X`AZ-iPd?fAL9JbCa!_y0cdMg+@koES<&8o(* zfmxiD1=3&f-v!4X*IvD7e0TIq)a7(-bGuSwOu*zxdfv%BTVtBMY{)*^M)hEx479q#9|kdu=s_E`f99nZIsq4^3f}+1|`=%K2A-Po_ePhz>2=w{zp z_x&W6Yn|>bpU+?5&`KRvxt*WL4Ooch1tJ&d2-GA>^4c6A>^qN2DgY`FaE5lZqWiI5 zFQgETy=KiI94*8SlGaWc946wXVsj1B`vvW0(pz>2 z2DkN_G&*vj>JnZkC-Z@>7W*%%k(cKd&?+DEE`BvIf94O&dH)O?Sg)Gvsc%4kBgJ%8 z7X~yl$4ZfJ2##7;?0JQ$^d2 zVT=HJEG(%5)P<LT}pPBm0eFFaWR<`s-G;YPF3|@<{lpf5A0?&wubTf-HsRhyP z@W?p9+HN3sJ04aIz}l($4>aps|8GHQv(D__Z62J+vEJ^kw?h@XIoP*P5Bt0!!){I9 z!vc#R!Oo9i($-(o7;LKL0Y6XLA5FCBBwyGu(*3R$-Vy%WNm62^m8_wpg{h@fCtpck+O~q>jxXko_ z*)b)iA0hJ;=TL5Yy6km|4EBFH&lI_6qzJuQ zBu`qxa@2~)O)!v_OMUxmcd~+uz=}r@gG(KXrw8aZ_Jfhh?pOg!$B#1|7G{Kw4=%T< z2g%*MQZpG7SU(U8H_J_;rbXo93|{=%3UlZ7kh6jL*$yl_b&n)!RFTsRrjbOw`Sbdr z;zro)-Ipbm0J_Ns=w_M|3@7ocN%Ura61`?FeY>4RJKn8`W{68(LotjsBlB@R^MvN% z^>8ioa%+*g6}>?jY3R!rjwW^XO9&7kHRhzPXb!^JckGO#-eQAb)on;CD;JOI8IMKc zjoc5*CGCkv+W?jzI#>b6N3{du9rO=@-b3EDZsG2rboW79Ey) zH5)w9LwajIrPqlbCRs@nltr(Tm}zltHVUthIf zO_Kd;_|#YX{$#%@DLqGR2o^!?1E0FzW(ccB3ubQRi|tqGu>RNF%IERb@3d6Z^lpZ! z!ez`0xUG{3qnvJKB%leZjN95zim#(H(9B4AgQQ$~d=V`o@$mg>4U@}f`)@cefc=rj zJ?6%UialO8vK=dBGWHoWcW|?X+x~ZFPvX%Zstp2o8a}WLW^1x+rmE~D!PKmaFHAj5 zE0wmM57hx98PCptSc$2CN#-9`ke633)-7 zh!vo;GVmipfGMGtAJKpx5h{H*+5Po-V%j2aZ}}1yFzI!BMPC#Vj;~1#2|7dR`B31d zcV^$zKRbPsh=KexBgQIXXbc9J_QJ|II|FEmY7@I$$XL~}21yPiqM`_?$cgIgm-_Tr z*ok;}Y=ij|goMyhmoh|1GSZ>LbV14eSs}gqoV#%)owHD^4?`9vaePVxCbNJ(lr*0J3Py7~@CGnIQBTs01&Fy$fBy94Y_=EW( zjlxUS;rKPt4^y_b9=Dcf^5R#YxUWlNgSR&h@`itj8{0u4@Ac^0gWi4xzL2|Y!fXNn zYHY1OrWDTNHJY&S_ICxt<4NR__h}?H59WspbmvLySl+s)oZ>vqZ$K>t1L4Bx8-wgY zTzz7bH|6;L)dU0M+znzK>Xyf+oYKFxS%nX}u>uOQ*usDi=HsQec&VDM`T6mS=>MhP z^!C?uxl13TT497cTrN7r8$@edvAS+te9EcrvK8i2r@Ml^4qZd;O)2!2)=*`1P0%b_ z``4m0Pm$)O-n7>61mHwA;Gug;NztEJ=>|-I#5N(^d|ORYQ}n5sR1*jvtquk9gvcP> zF>ru`1qGB2DSCT=y#@N1){%0skZ*!B7(Zc?Hy7Nch~D9Be6c(e8fT;y<8=v+OmjJy za${Sm*fyT-+^97#L`xRC(0UcZN>YU@i;fLM_ii< zKjyZd&^N#hbI}81<3*9TG16DA&%8keUXO|-FC9lsYl)E2wL8D!ebvM!#7XJfz^E^e zv?x$rSaeAA>vN(9#!=rJw!YV?FUc(mJsfS`xLftABAszxAKf0*US|bG4QR)-{Sn1O zyWOhs*h4kCgiNEx?b#Yf;tSgGY&MP(m=oE0Kx$nTYSvwNy+Tj>^#%Q_^5S#LQJ{KE z!Z-81*DLm!y&8!w#a|#FJ2szGM2x?d-GsXL>n^`6L`1w)b78vhI`fC zG5On(uyY*gqt7H}+#6&y(KlGT$=l*y`cl_{P_#2IK7FXRCq8F*!Jo}~RgMuj`d|Z5 zFJu5wC;VsK?-Vk<6L0ZSm_7w0Dnc2o#xi|47l=m%gxk(x{*iWRRaTMxv=@0Z^F92p z=?K!MRYkS^b!pJ)s$J(s!z5Vvizv{$GrD7T?Yj8P;mEG^7nPTdyeC{5g&@Jif?(f( z*Vpw%(CIGd@tOQ^)}or4*l3%XAD@YP0UK~LX>z7xn;X^EAG2+>`QW;-Pe8V+_26gb zkbxK2=1|zemQK5(D){ih!Ni5!%gs+?b7-2rsZB~3Wefi${UUj@`cI=S3mzYE}WrmwFfNyGl%;DDiy5V7}=APw=tXd>8kZP*+Mp(-(EJ) zPY$aun#v>B-o2~a{O@jTf$hJo$Tp_$mj2Q;6f=PJc`z@scO=U>3}(rb?F@^`WNAUNZbEX=odIXCpB>6(H})Lg zaoc1gp?LmRS+Gp9=j9a^N@@=~&!8~6TN{J%D~6((P`m*KxL{1Y0kU5Zj5mPa3-aR) zP~w8TcmtHUz==07y2jN$7tfE#!wKJMu146LZ0y$BqFC=;+sTiXF^xHZPQ|AUbx#@3 zbUC5kyC|4GN7Og^mk;Dy5)JI?InMxUa?*tPXL?&Jp68kt!s=ukj@@7#z`dk)5G(2~ zANXIK?zX@x6IhesTaZ)fJm0!LS$A~!c<=p+=c2pl*{RXpdGYI= z+FkK+kzLOE+`bqa@cQs%!C8fI#;Y!;j!8a00@g5PwaJ~aV2(310)_?$0v#85jav`4 z1A@Vh0Yf1?EIvvv3^xfw&g%y4?)>wT3l6fMECgrFctKvu`zy+ov($eDy}ObhAigrc zc8J4d>^YzS8$go%t3y<(G$Uu6DamB_kuGkm~(#U8GbqPcHx%~M(nmK%Zz;vS# zmpH3=5Y_uXU?5hJq3n^m`+4{FbJTqvqn2@vto;Q^$;KP8rzNW&a$`C=RmJ**=@nst ziW%KCHhvutA{4I!Lge^$K&Uq$)Ej7+ z$V2WYzev_X?weR0zj}Q9qL8%m3G;tDR|o2iB0XJr?0hodgjfhwq)Z(fmnK@ zRgb*xid~x02zHgpk6#QZ)1COm)IZ%}KEBwA>@c@Qs+R;D34e*AbAN*%Ph;GZ%W4(e zB2Fq}ZNRX*Wd(dPT{t2iXdwKxVKu@k z#cyCN@<0uU;i+VrrK*0YWSS~za3Y)2J&d-;&Dvl%{XEa!=BnZJT1_2BG9;gdLV?*; z@0cyya;R3vP^f3VvFA7xmEKWIMV>N3JnAcKg zPX)P5Wm@EVy`3pMYRbncrTK>Pag3b$0xjttr2vDXCUN&KVGSK%`4Yd0_6PNb4t#~) zN;#3lHP9$;-T6(r%sN$VR-6#mrh2%hhC zH4)4L&23yD?#3^`rSDgKj#3{6{IQ8(d9)`Frx$>FjC8jhuQ{2{z6E8j9)l)YunuO+ z)5G&T1oiMtQ|)Fqb}Ix?tIRw#2~YjNMXorJRO@bg3P^Y_>N`lD;>4ui@KVN&avhCR z`I?psdy%^W6!sk?wf%i^m66Ns2uE1Opa4;AQS!0MK)q^P?NQ?OzWt`IV2hXbZS=u8 zs)M_^g^aEgn!7MS-|rSC6NNt#2GR#0yOC#!!gAqy5!gqV?#DtI${ZW*mfi z6*BaSU%>Y%!|@A-A)BFD>kPUk?h@mQxnSbD=ni)9t{?Bcp1e$9AnOS96`xx^E`Hf~ zgu_*#_yrT@pPZEs!E)vBEw5H!Kd__RAQu*E=;EBEgzh!e50$ zLW!j6V-bKdOH|F$6MZa#QXh*RDik#nU_XFsPAASAgI`95fXAGL*c6o#k;0CM62L z-^nSSMCtb*`7 zYi5Y>m#|hSQPMn+=an*i&OutaOSK=+tb6AtFw&aY9&bHXDJ*U9KhVAfD=P8KliD~$ zXVmi}_L=Uxv0v)h^3oP+V0`I7c_8xz?v}g>aN@|2j%8*8V=A1oO!4pHsDmBLWSfgm zW!NtJhIzuYxJ)L;_|!2Bp%N#$He|<6i5pu?)hq>>mu8RS1}UePI~JH|mLX`HAi{FV zD9U%PR6uMpIYg%G=m=9=AHK_%Ag1<$mr~fVFj4$neoEaA;vcQ(P2PLFW(szO(nZdO zuAN12Lx|T1T7;@>e-9DRH)Moa;qP(#{DPGV@!4u7KYj^)GEH~L?rR#$`~S5uq-CMR zQ2Y`wMN9G7;O@SKH0G{&1rWxVHiL=cA7pzJJI?fI6`gTP6kM*uVPG3feD zLru~D7W0IECsYk0RNR==%(O1JHeVE7-4q>!q9?;nO&mqz($)K9Wp_JPd#fK8RVy~b z)j>uZQKEa{1^GTfq}kXY62;5u{1lDwAkda1V?{?s!EqGFLf6|jptYPWmF+!t1;+%v zvcr;iMup&@$XzNfYHG87UDuiws~Z!aX7O@7XHgTy9M%b&yR+4MuZMBKNfE}uH+*?2 zGHLh~-`6+DOg9Cags7@9!Lkl^N)$h!bVdaGx}+7G?@$}3;v%Ng;4(hX^oz|7+EG#n zKBX8i!xVBgHPbx!q=+W&*&6R~@U{8oDlrXyUV{7<@jHg!Vvp77d(Kv{QrA@bsJ6=8 zR(5OI;$Y3m6sqs+RgL6$(&VV}a}zvyvqXB!4BjexfiJ87eN5;S1$<+9d zj*Nf1r8#wsIh>?9k`RNP?7w1GVw*k)+uYBHm)J4>b%pg#+AA#2OyoQLrQd8Os_Vg1 zO=H31ku=e@`9@pNn$9BTT5#UmH2FUDH`3#__wj6cMir5jcy~8VzDNCttQe78;$bVV z2zTjAsl3cD#cYD+J}VFvG(MK#S;Hc#v>@=iu};=i#EAx{9^yT7y2ckp>rhASz|fHx zE~lR?v8?-qL_D{BRnvLH0XOz@U&uXYLcO}}5j>KZCZy2TvAGr3F!6f(%RiI6%R!U@ zY8ST@J6%{IjWCN$AZMxDzMjPgVkD6Ho@t-aBd@}fuypIY;5?dVfj(Ag7W6R!y%W%j zJlHhzssA1$$ZbwdtqoEbjtruAus)+R`HET_`wbW&!q}6dg6WG4DXVa{?)9FbBM+E? z#vm_*A4~enX$uLHynn3i)M~U!XLZ-$;hn-jSXvUlHsC!&t@1&6!0dr`GphgJYH|>3 zB_0CiT5UbvBSG6=e(L`YwRt9}ov(jc{dFyyT~&5kl1RMIh(zX&j{6MdXFJk&5Q*aL zACcFx@g@1(ve)En3_sTtJun=mlPUrMBaUwM-Q>OEcJy=TYXwUBJ*tRE%^#Y{yp38- zKyU1X)5kO-Gmt^D(Kx6 zlw;8SgOZw2DNty^k#ttS6A#x9vRE~fn=1AJ zp4kCnlq0j3N@gRAB+{qmTZwK&RnA8v@28F#5%;r$BOi06efn)eu9y~#0G}ODu4wL@ zfac_+eH9zhtQRcU$a3Roud8z>1bwk@N5KHI zGfL*aVI0odD1ksyp)-%3Aa=<{;Z6y40=nHF|N5|R~lpA}RT$U*eJiUGUv+!)o zuU+>?m3Ctn37#!afBy3Zp03kh29{)TE8hYI1i3F*)wOMGfnv-8RF;nmssi2G-d{o%hN=vSh|1u9k}?YH)SHGpt6 z<2&n^(Xj_>fWw8?^8Z7*>s1Dg;{LBXqw<&>j>++WBvSuZ^OE=aK8lR9O=!KUBhOx$ zWY;F=sRu8bStnDf@o|XDbOvW_9w+BwB?jti9b6)}$tChlZ?hovFb}Om{bWfIEY}nx z_DtUIw`k@i;}tnIka<+o=tjI{lEwAT&ddaqkJ^`@KPh7Krpe2U(vi|Q=0#dZ1W7qH zj~AnIJpbRLIP;$-2=x<7mWX%Roa;KBi*P#xP~Tex@4=|)ddZ~uaMI(3llFUCPVe=n z8+f@F+@_ynQm^QG!f^hPs&M%(`C&(9FyH7@(p2@xkF<6@=A|bv(CqkAUYJ|FIZkby z1&jII(}hb-RX=NWY5!x5_Wz$GQG(o>b)>Ogl8^O`_o-v}MZioA*mYj5#Te1XL(Z0_ z+ItMj{!1>OWG1KP!``M^i@ksQ|FY;z&qZrZSavxY_^hDm&m3>}ql|np77;hL8xJ19 z*7$klaM=nBPTv~^uRtkm8FqC2jM^TT3;;>TNRExjjb%q} zC%<+>n0VW2Coj`y@o$946C(LPXzc~FMj@Uibz0VR#G2)%3B#I3{H6{KjLctr*&QGc zw|yM#j}(N&E}U~jBapz!n~<{^3Yg-5InuH()7|9nr)fL5k`>ZKWbH&m*`&me+u+^A zZ)LeiJYnsTUnoeN+dL3*mu;3DV-D-)SA{q#5Hfze|hxnS+RL_{z-X z3kUiJ;&b-rW*hXg9n8)4fwJY)raU9x<1-J&=X_ABi^cAMz08p(ya3prA1I2viyy)} zxgBdglRTMOl24`^`nEXyIc4F%htc!D>NoBA=rNvUSu73-Js*sMFpFiZ zVevUbBj_8at8@i>YwWXh1}xfx;Ue|}WVcAl_D6U^ zwpcs?$S5eXcp8?g26!@eS^4v&D!fz`j>xx=OwXN;_gr*4rs0-1_W)1Vjv#Y$x{EUg z?Zw9xVEHbbfZh<@zNcUVeXAW>(31{POH-Tb)9DZl15#jQbk)_iMbbVs!DuYNCGE$1 zFMFG~Y;Z?D6Xi=?Zw6c5?o>nD#zx<&EJ%3=3wop53%hpY74&kHb-+mCu7kmXodpA3 z!($5uJX}kPk3&1?8s;{&&Vt@#F}J^>LJSnV*EJL@!0Wg8xMX!wX`MUCQb|P{)Q|UQ zzhFbxfxH4N=u|;Bb`;VY00+eq@v+i9Y9*bQ$u-LiV|szqFJd?|d>FWNL)OGrMY&6N z@<;tPx6&5Qce;$z2uq6M<6sts8#Z!18dJJ`9Iow(Y)QYQ-9rjK$FIMC&*$kTOYwBJ z>TBP{UuA`#>(?fi>P7+4xKN!RP(4kIZi#}M%&oMl{$DAWEUfhP;Ub7@3k=IXo1Uq! zhxxPUPE^S+?w_W^HSD^C5_xjhL#w^Kz>F}dYcM5o+SopZ*404_!BHFJCtZTCMdGOk zCF<^$sN-M(>yPlCqi^Ij4-(5My5j?HQ?xtO+L@g7k+I=Q8UP})xb0`5qnBbJD!s{j zt*PrBh4uyETJBu!#K$|j^(NBmw`1a0C7zP;Sibz1}dq^B4 z8t=TK8unys$ja*w{nat`^5)w^`H6GFoF@*MZMHTxmG0VU z;!dhbi=TqFpJ7Kl^G8GP<^wo5%J&7p0WkelaWp&jG}iSNyYL3yGT`l=5*n*5=WNe? z`GCKkcW|F>5bb&gXFaOm>XI@X+q`$ZgVF8I#&@WY?fP7J=c=wl@D>SPd`*DY zjp@W~7G~qlcN+1~4a{2wv$!K&O8EqRPfnT-As2me7&nM#=>Ar>{X~&$cYd<;8fJtN zoF|~s7ajlAdJ%k)@oW+>7ZM$a0h9rHtQ5t$gF;}%S0Lg8XNF{*YwzG@~BNAt-5oY-9t-Rt4gg+cAW zFhAq@qk>GH(t`7yf>&N49HDUfmojd8+i`-yH{M+m>qOHhY0f7%^ zW~8DPf8vUjprs(mZB1jTiG8mL3)qQLHPKb$x_0Jge(&=e@q&RlkggWXYJEScJb77u z@_M<9z9KH%2^U7+%)jaV+1$TW4eL}RUg&phqIhv@#gO+t6AKeBhtP1?Mw^2p#W6S( z&@)0L^zA2lqqizK$*egwCG7MUopLihF7iAcFmUPyGk)k54Y=)qG3#^e`)l~u&>sX? z#;F)WK8&wTyZ3f+MVlG3dB#cMA~`8=B5}Krk?s)JFy?S#+v~mWw(kXA)r)*<9Zt?T zemFVnN~)C>6y2G})GoLuS}y3Gl7}aeWCHcei!iz~7@vYTINym+$!8p#iYOSaeLu1Z z0l=Cg@;oJQye4Ajvj%_Em7XtTKK5}T7VQ{hCNINrRu{|du!ar*VnwPib{P)cl4eejQg+`fa-=;Dw^xI)*O*2`uj_}SZ@S)2Fq^DCD|wYe z?P_T2#$Bpd4U9O~((PN+$SW1P*DL6~oGG*(wq}f<<2U3Q4WVGCoNSMaY_+ZZ#nOjT z49&`Pg$54o^PWCM&whV#2WTAz+clsc#Tv~|o-Ff&akM3-_Uh!UW1ztw0Yok_(9kO^ z=SY~hkxSH`Lx77IbbuNvGv!Tf-RFxIdC{Hu(R46=K2=W1i=WSsn8Gzrd9^#kr`B9O z6v5^cEU%d|9O*UN9yNK99ts9BYuj{syZpVd~Mq>>d zar}^}_53mMDR{%24^x4f^Yi0V@P;`*FPFvKm<}nL9-TiJ`7eC&&;KCupSEM?AB_A` zPbbx!KNR_~S*g~XKOA9LaIsd66InLGjjfiSpODXp^J0!jN&gmG?Gy62&%ABEA}aWt zl@sa2$mh49ubj_A&36=paI{st#O6Cf`Qi5y7YkS1(U%O4uU&QPM;MI^OqPvt+=W85 ztG>01960ohX9l}C*xgW2)U^#~oe9^h&icPS@;P+ zX4huF0ARUzp20El$gAv%y=+X+;a-K5!Uq=s3dhH%57%yv?9Qy@9CimHK=YY)1f6cA zR5vzYcJ_`ZZ?qfeE=7;KZm4S@zv}>Y@$p^T$DpPT<`=wzuX%g%3Fz68jr5)(4F%l| zq5N*TgZo6ogau!BS7f~-aJ0_?Z1_u>(PtqalKI@^q)Kf?0Gxat5KTjBiT1XS@7h6Q zIFSsKQm~;GpDP-?k_I#1Ra3?8g9|C#dpY05WR20O$E{vbjh_`z;U>NRi;gF zm+mGdOTn=?f=3mFhI^VrXbB3z15^5!$%A%S6Il{Wy@h4Oq8iM^-qL(#?wilavbWb{ z5yoO#(0(Yxl#M0>n2fcX?+S86?S+Y`B5CpT;dZY>OeUtG#=Eh7mYn@-P-~VPss0_v z31Act#QvEK{S6Vc8C~1_Ay7ItSy0N{*wiC^@A;M`8Rh?p@5$)zgz_T+c*^s(COWNi zHXmx~xo270i`iQbFefDvGpGnhrFce@9$KYGq?_C3XBi~+x-yN%>=z^EyJehM&ylip zTY$w-u@%bDuuz!gSlYaQ1bP08%BCnLuwJb7NVQg4ijf7DjD7t`S^o5bsRdSz%|6oi zcfM(0PuK9#$Rk6Q*14kV=zgC5lC6tAG-^$1+=hMkP>{zlUZ#P41g+#WlY zR@l?Tx$H_gmcj1Jjv>jokBzn7W9D)cziEqq%j2Qcw_yrn)@JyFnC|F2xRM<$8<|9L zVd}v`CHT~H8G}^85s*{C8LWLp$Za20Thl_(Z3j6J)jH39He&2UoehJS^ykR&P;-Q( z%yLEbFo%Lv>WH2GdB&h8{dqFvv{L`ywQ{stIh7oAD7}?EOwNB;C ztIJF6$*Jh$0D}w`$7khl7zvQRLq+UqXZxA6n2(WHyk-xI``J~}#J@^Ur${c2J~+hy zlSONqz|H1+t&hX|iPx(975@8O{(IPeU&OoRjNJ86cKu$)ay>-!op4d&v%ak&e3a}I zby0soZ|thShQ!R>D-r#H$eYZ~+lf75^+kCW(>Dgi^gL&C?LcH#W{oKmwPhmhf=)E0 z*l(-Y)R<|{_Dn|ytaRIN9D}9aOr;JRh;mS!9&|Rbjg6?3r)JvOKv0l0=dWLkqkhSJ zIR+&~j#;7j^k6=f*A7O0lb#`!o%N4Bgr_4*w%2N1HuOxhjS?>ZJnES_Au(NgaG{n{ z1NlyG?Z){Z@%kz@?t4|{sN#}<%s$wA_Kxz$<20X$H_O`Vu9~c_*fQ{4Ewv;AZt`&$zDP{E8uva=a;>-<$T!_eAzMgU$d7$f@4O zs?Lf7-U}?Jz*gZnC%y52pKDKKr!lx#eM}C^Ru3a2WByF_Y+~{Us{p;;Dg~U}S+&7=w_>OF92u(873tdE#XqKvAel4E z+oEdhj-4^`-UXu&H)WwU2 zoh>-EPalr#^!8NjcTnP;9*QKc4OZx0+Cm4P5uz&=&Yw>YD)((>l*uAlggQ@GKZR7d znE%zE@t&(#%kqmJ$mq%v=3S4QU#oUiY{CLcDk>FyVtI2mPuX5=T2f$+kVxqTefYv& zicZ<%IK3dP5C`ALy;-Y%?)bavN^g^iAwQ4!j2aavArJA}->@*R$J}zn3vsvN`r%(s zw9P*7bg%yuKFhxkNiJm^#BO_C^+X!IN1MqJT{F+#C}8Ffo0CycSi?7dLvA{UGuq4jOay=;4PIIav9)+*3i#d0h&Mj=M4QQ}f9dz6L5$c}ukv2V zVyrCDtlOnf>ONV!{7Ig^H7@Gkrxeu({p*S9gZ}v)NuB+fLz=@9tRxga+B5ly+(X{X zN^SyP(vDGto(kj=;it4bJRwyi;7HBGrGKuBlvB)P_iWSfYL0WNwk2T>U^|O>Ef6E$m){I)>4?JnQSMixlkHN(ho z)2wqep9O!9L&M=rH)Ndcy#&iYZ&-c?uI6AoITNqwgQ(&Q8VPd!ZA~r}z4+}$&L@B3 z;)UMk#PU*R$*%1a2*Am%N=mV(2ui&weCFf0oKV`~qKN3483rcPUsFMN6(VGwH!kx8 zRGSB1)>XWpNQgCTg`zHvi8VsrX6IcoCUNgm6M;6mAJrvX)7oiTa2tCMaU>0Sy{0Ku z04U~KqUhU0!;kAFeJg+b0m)!|<5dyJZB5XSz~G`4Gn~qCVn8Ze?MdXEl-h&GB;5kn zxWp*C={6@J49uhl35W!Yj5g%oJOF0x!c$pFF^w(6=O2Pttg5y&I4PT|g4>llO*2ME z0H*>bwT=bJ6GCK~kthzI2j0pj*Mv_usTnh6XZ!gRWj6gp8kpgL%Oy7W?qE$I{LzFR zNs^m>vjz(A@F`4cYMs2Lel8!jm4+e;!m1vw)F4c?e#*j1nAbWt)=W#n^$a@{sk$`P zccRHrn*ItO56Oosa!z`5Z7=ECQRLvKGc(U{g|p=v`2lQjFI<(4hiUE~F%fFn;m|3W zt69#MaK2d6{**jti?*%TEgTb73{Cn{COB>o9Q5gvB_E1ke+7L+pZEurU1Mr98!y@W zPyR3SlO0nB7P!mJhI;Sl`xfl{IVmw$C!dyI3yCos&u2fzUbxjp7aED)^OQ8OilLt9 z8nAtg_yCe68*2=wSf(jWRsPrzxUoB`dgMZ9Hms93mU&2?_t=C08azV7m1y1zPBxAZ z75ky0y<3Ys&y$Cl=qw@ahn9G$f#c0?t-I_-m`wp>iZn-A@XYr zF;nYgi!LBJOWF$Hm?`5sKQhyY0(YD11)}ygzvEsS5?k1})g$q5t-Ox@ZBn9HGNsnc zGh!&JZ**ICYuG8o&kKK&lsq)YTG8nbYutIQyrplaCB_l)`hrwNieuR0BL7V3Qtx4j zQY+;X2?j}K%ss9s+qbb~G z@Z@STV*WHd!mO+ z>9>9L#GW@{d`txUmHpAvKv!A#t1OMr2w+P%Pk+L5nO2yr#YHXZGA#lTQ zYk^(aGf&Y*Q(RwQ9lA`DuDV5i(?r*p)6#nIZU-$Q@oBZfD zx#J0bY57|bq$5(Bq&xRRl<@=8OlcV$24tpzqWK?h$r$nir+$t0fsyPU#3(sSY|aI* zXdRjTb}Qdd?NS*K4a-mLUuqDNn6@x-c2{aVyJ)davH8iROnuGA$djg5=bf*p}>xDpmi8>cf+r zOBbA1yXV&0g!!f=`49PSMz1ALN;~0#RpnHZIa#SzjfT295!KM>j{Z_rdyoDHKUU3K z{-FO@6kq-`^B9l*g5N|#7=5p`Kfe6uyv3uB@HbL;2)4}kvV--Ke=<{?fy`}{1jv4A z@MZk7{@~wxoUoVHA=F%b*~+)Mu;eYYDx=_oz{((6cob1A^tjI9?ym-~A*`CkiAVXp z{JmZ2kMvsC)Mi_MpXm=wa5+q4`32(Q)ElITbuV_?Z!W*gdo)1Z@#S;)%dN-ltH{G@ zm3VI6${=ZO`?|UyS}ogvGs-WCM`e!SmA(HN<(KkMr-#epiCHEuY4OC(Aj#%V+@;6Z zzXNC8*zlbS)vB;W-O+2v?HG1&SFFMy6TO;*1rcM9Arh&H%@Zvm4QWt^>QVx;8b4*A zlZ4RKK0In?zM9`+es!adg3yQg4W=$_5Y6rF6&A}zh|`*FJeX~Cej;o0?9SX}zvUSn zJN;z{WE1iqXLtq7rAlJ1gFYc&ImR;E9{+s8O+U2e?C zU@dIm@He5oA9^zfHm;2Wd8s%MwX6{gMyrEdri}Q7vdS;mQ(rnfo5fc)bL>#&(jGEb zAD-D;_opjo&z`;So&Uqx+rURvUHjiN$p8aH&!|z;nrdoC1x;Jhi!G5@qX`g&Dk@r9 zv6r@9uDx4Q?71q zvFG-}YTvDI@7Fzn2t-%Ow zqJ5NHSk1TOf0bF&jpNg)G=}xWj39f>rdi(9;{?|gHb?%X#K5wPzk&?pS7|~`avnohtk>x7Po=;g7^k4sx)UR6nk`#`y0gSdr0to3E%lI@iS%ZSj zmWB-}cjpjpGE0wfCmY)wLkLS?1^7i8YPlnmf`q`N=-Y%8nu3}_3eO*@#i7;r^zZMm z7il?G%YAgylA-C-+yk*xBXnRYX`m8;8xEVj6yln_g)qe@Ess(nLysH#Qb021+Efuh zNH3k;gL(X`&=2Co@4Q|4Em*Bu(un7*`%Q|>pS;`11!HYYEMM}MgE+DT=c+J7;t|w2 z2!BRCtMavh#q|b|^0>8)$&)lA@H{cX&nNU#8G%)|Xa{Hs_LolqCxkMhds3W{UEnJi zn}&m=*iSXAuXb(fQ>r{f$<8ByJCORyX-=@(=cc)N(&Zq(8ag-VT#YHU@=~@L60hwu z&3`gr9b(6bK?M1A@Q z_pLtv@OLD|1p~U1AuM!P?H;H~O%AE*iGWT*B;PuM^XPE3>k_~Lxw1LS|=7Otu zm2e&OPa`xo5dT+^AM*PpwRR(WgqoRY7$pPI%J z1We7JU;{=GP)@+K{0IVaQ@Gw!43A~Bw=TbLH$mJd%BL9L7;i)VHG|F7;dSO38D=$+rWJlu(TB0e08nEZdYt zi?jp_#wCf%=(A9)&R_ICLv(O$GpMZ~mjNm`9Hsv{g7#bf6Uy&2G-N*-Z;-*Ms7+Gm zh5fra=&z6rQWSx7eMM)O;J+=?P&J0MFAWm_@=1VfL@fg>)9pn1L@BAsjJ{c9ruTo} zkIDJJSQ1NpZXgyVqXZ~i{DMW{jRB(Gz*C4JdHGLJb#?>}U|#RNHJEu#poBu*A%kQp z#aMZxnoV-#je0$d6xs55U=?fnB2AD^OS|a3ac5DE?|!JAtPaZq`E+mp3Im;$6+lvT zzL_l^dZ&@Bvzm>k=SU`O(Vw0NJ`$l^D+@7t6yTssBe@YfEL(MZr#g$?0ByP1$;pph z%nNvo>xq14INO`M=$YRc2rtIhJ?ceDSaCO~;uz=TNctFaov?fGqIn$YK9e=tiQcZ< zwV3G5E4n=w4ovSXJ{t_>@UYTD2Ua`oZB&D>P@P#2n~VZ8qtD6nS4?ea_?EY&U;Wlp zP;YWjQ}MTJ^%#^|cpE|l1%fDS`867^16bk-@xiU8nJ`rus+!i7(YnzV|AiBQE`;|t zw6Ab0#RnWXe@uV5j}w>g95$%jFxgv-`@#>%muox|%gPeFC?CBKs%^|YloasZO7X~? zMWiS>cSo{{ZuWG&YMiJD>p5NScz5I#`kLmLp1!Am4&nP4pX|bv?X~r z8J(rKB!8x|ShV-Afm@Qg>JGabbAhCUNwXjZiZYA9F@%lF|H|r7VyyhX$K+^M7i?Up zESoG8?Ir7tQycP~CQFLFnLF@eqxxHtpD@o`l3KYAgyBTKqmMt#D#V_qfl{?jsN-sw zTk`5_4zMshofe@b^D?d;mkSr%>&JKKGwDd)y^fkq9fgu5C3}CF8tE)MZkBia3YEGf zs!5%5*0JM-cmW8YV*{LD!>xE_A+7`D4^agk`$=1vQ5y3T-ht?GJWZX8MPp(XeT~<8 zM)3AGzMJ7D3VqV19TQZfI)E|~)bVN6ffHhp!a%56#`IO5fAVcAw)7ZrT58DM-Ee&( z{rMHrMVc!mD7269z7xX~>o$?<8<4=PUt&R3Kx^K6?*p!}*$tZT9`!0)pwG-N!*Jw~ zVKY`_<~~G1$yK(KZTmD>)WQG7|2aQg z2R*qF)@_t(#77F1EQ@TTTd1vfMZ0kG1nP&N=))N0E#yBmuD?7r9PsnANM-SSKTDlJ zAbm_VTK#}-?w!gW;&k7=6Z&JUo`8BBdtUkv19qv(O$3et2nnWu{~#r-U3&ngl0VS( z>ZMSu|9UBHSzTwD^<_~rTo@t$_PQA%T~3P*rW*(?W#;R#I8XtCOHj|GKxV;}Yh$0q zyIAI&NNRW+`v1(hNV+H2gj3Sb9<1HyEWVIpa@V5bt&i5MXNN3Vhual zm*up7y>B;WVy!w3b@p9%-SshNv2Ko}^6FeH6KxOiv;(ATqlE8KPRk7>VW@CFlefmX zRZIXbS;^I2FR-SWTD(f~iCnfxNB-h0FM*{cP<%~?%=Im&jk>AwYuchW0eoC8gHRpm zHUUF(UqktQ4A!pB((6n)duj{hjOVT^adN)|ZssVYo0x~)UM@B%-Daza=DrpSD&UeA z8Jb>R%5!M(kHX)x5RLE``49mv=$!Jm`a2^Gix8&t8h}dwKos780mDy$?*)M?KR_}# zlR!%~ib}4t>F-gL?oBg$6rdy*NMj&v8VRi|#^})wC;9R}YcL2MMP=sunU7Q9Rz|)` z9TAjzfl6H+1da;=&s3l+jg&GJ+a8GY$tUV5a=R|2o_Qp zyDj4@FonS_$(h{b<+Pklrcfr|`KGNel=0fA4*`S}hNg{tYRuk$sE)$JZtK^GTT+rb z3kgWI*RGxSAkKbqH-X0GH%KT|eH;UHU(8eyXaNe+mYMRxy04;c(4^)X@v(ex-C?q` z`;(bv(c8UTOx_P7=M4@bq@5wLh1w}CuE7uzz%y@fLXw)n0vpkY)Y3>uVyrT=szN_S z=!zipw#4L(uh4p9}3+wsUe_RiF+sUi8lF1DHe=#Cc>T_~yZJ;W! z7?Bz*Y>(-r3)v0+ z`}Gg9FYR9h>;k|gvGjB$WroVS-d< z($lDZ6Mn0DL)4BSCtS59kc;X{Q0^b)hcXQh5VuAd63 zkXF5KOX-EvKQXtqgV{p~u-E-&Z4G43lf#je9=9IFK0bFunTa~~5Y%w&Cz zov|*xoQCN+*G!rkrSF0O0HAnFus-VtOmD{+a0L9(eYAP3!YG6FZeIf`i_3!iHSHJ) znASK-#CLJ^n#woxB0D1IQxs#AOoolXw;Fk8ALS@baiG-8Bj=Zj6fN{P&*GxvHP{Y6b9Iz_obk@r>TL!8y^nxRO9Wh3?5bw zlAB@mU19RG!sHp+toV%KS7Js4SF?s7t2WD5>HE{{tdr*SKGIbs97;s^=wEF#CPxRm zeniIeGd>53vHKjvy?%{*$AG^7-|#m)dIC1!hcOAJy{GBHJv9k$ogujlR#xB9&Y_!Z1Pz)G6#$|NSm^=fk1%`2) zbQZCn3Gmy8*v|^FP(mXAyVE}cfB)Lkhd(P1+x@Z>mn6?l&JQSXJgO@h+rI)OLWO1B z6Nks(cdZBb&h?A8{)pKUxxETs!(Pd2YbFt5QAFf4;I7eB= za3FL|G=s5WdS7lrSuG*Xq8F(L^FFpso$PPT`(-7xSnhvhwE=b}l=f3fJuVRhOIme4rFT440zEZp>o4OCmCncb_o+TD$^?gd!D#lNaFy#_bhN8<~ z=(MmjG4L==3u!bTgy|j{kWSPerkg=JP_Lc}dnso7$`B{Ws4rY>=bDrTpRtAt3;kzH zF)6b`{whG5`v<osX*xhyl6N2-vy=N4B;|gCPB~;v0n9U3FASW!I z8xP{0TYjM!Asl3bz$Q|SqXX=$&U~-#0g@_)8bv~AkP0tSoiy^47NMSJS^iF@e-fq! z;_z>5d$5YP!z0v$(A1St^%cp#%*m}v=J^mcRz2)Zw-FsC<4f1lpuXjzUwdS$u^?<6OhCi z2LH+qC6^nf30ebl@z|maQA)BVkQ5eDQ}K=vjz5rr(v-l6>|Y-MN0=tppT_XWvj?Q< z(|3pKu__|NjMKKul$&%^pI6tY=1^lZ)>weDGX5qnu7P*^(z*`jfQvyE< z2KaJc-N#Tj^^V|>_&5f4b?OwA-5nG&LB)JIC_5yJotUm30?@I_6kl)Gn+at)+0=ck z`Y&Pcj%UW4U`7E_NVX04t62r?- zg{lwf>U)6a8iCzi7bhhq6Y0&M;V6+33FE^kMdUP}DL@(dG~ahp5R}9@y~ZTR)Tbqn z4tf>li_nFr%nQ~&jmcwqF}6SDyqutrV|X#bY`-)v@mo7L@%%yw1K)xuLXba0O#ulS z^4hUG1X=Kec%DyaxZi5_BXvVSJ*=SV5cSVcXkxJXr-YDTd}Q5; zo6RU&>$Ln$&8J$!Q#Ai=9gLRdZ3ZoKqx-x)YllTLUo`riRZ*CGx~HbS_5cP>(N$i# z@l*i(0Vx$+l?zwUm6%p6f5xZj`1bVi?&>j! z-<@Y?A z5)u?Kum`%|g#nuLMxp*~0s6NT`nSb{^lx&=6Lf%y;93!Nz$CNQ(27$X&`i@UkK4nQ z^CLGI{KMro5^nG>E?38WV=oNAKi^TH2NP#A45modNKM2iNO5>(0kU>#xVJTj|A4*t zuGoL!yy{#-Y37Hh)+Hgae2_rdxXc~FgM42a3_ zO1}U04!q$zWHv*KfKQR2@U;N}M+Z4fXOUo)a-2;9f3YlcqMaNTPpoYy5zZ>2d44qm zCi>{9PMp0QaFk#mT}jnt=#S?hx- zkX;an1k$gQPX3{^^kh_~%L`vrk%nF~3t$RR#|Gw++83dYo(rADQjO-$8&ccp++4>i zg8OmNmi4KRp$S>;(`2Vrd?T~qI2|?JM|CahbLSyi!VYUYfuPDjAQ@xPFKxooNP1*J z$6YgZLnEnSNG)70v=^ms?Gwy&mDYQ(fdxl~B=epsjx^&pQ}-FA#|>g}-d;VnJB#;I zJd)q>RQ?XHql+M*D*B!YTHE*u0B-pLWdMlwXC#)&&CDpitp>Bs+MbUiq6%*UmB>2P zM2-od9t$0d*u`V6B4eHD_fALw!mTiUUL0Zvg^&-TC%vUXVa@M@fiqdt8so!^u;TMT zXi{E@%tBRGMN7^j$O-=mV$UJAxHSB#3DSlH{xa;VcxUbQ>+UlxHTI!Zj57w?i)OG@ zLHxb>A3+})Y>nYyb6TfqRM6Pyd(k|Lk^&a6p}dTcSXsE2Z{jNo*H}_cLU|Em-{ddT zSb}n^3O}}SePmt&IJ4T!d=uIySNrZ%l52R}E5x(tV}qd9$Z6@bYS_>TY&a$9m_3HO z*)VDyV8xj}A~3YIUFaHH=FXgJ3@>e--rIvZvZv6ykEw^#zv6I+bK7cOXVvt&E2jZO zbm5nT=!XJUK8A%Dp#n%Xg_FqXoD(Rp!DZ(o|3Lv)yd|_J&IL#+XY2}Z z?Azl@OA!6I=pygH9qd+(#er!qz=<}+zxq`2RG4pPDlFU?bW_FSR>-=7h6(q6aNi0J#;wbJ<(KaJL*^dq7S46|*Umcv2jDnENWbn5wEwSB+3b<^g4E&> z_8?*K+b5r4lT~32qd!RnhKrl2I3DLS|J=U?oV}9s%Mh%jC#EX1Jc7~rzB6yPD`HZw6uXazfBT4Rt+C> z-yg=Mc8fas>?o8v_dm^6R%=9~0iO+*krZdd_doAF=e|A+>8{FYStMw5`Hs0<`Xz24 zbnZWhFQL)}$!ROJ!_ZxS6Wd4*6`sOfAuaPLdGjloxV` zq7wdLl*PPHQ!hR2M77{LN;p2n%kSH8@~}_7iHFN!;XIC>_!KVl35rhr&S!@cH-f0X zQ}+n}r@H%xXgxCTzgT=s=lFT678fe+RQ$4NL4qqDmiDBndKj%rWFxE0Gx*s2iu=m2 z+UMu~Ku|6|icB?|j4OzJd)X;(-)H7mycx6%1y2lw>C!7-!n^x^G&QoO-F?4AM)B>s z;Jq6C^2Rr#8~j*n)sx&E!P!yxb`>$x5Z@}jXNo7A^?S#@jVG6$JYsl9c0}z#XVI;I zGx{KE1r9lSdG`I5ws$;*=djc(W)~;TS<=#MN%2|At8zPsfyKgdMiBkyb_}B<&CUW2 zM4u~cCz$gE3rNRd)pxn#DQd3gWP5iyX4uye-QAcx6_#){ui9gY6n65a!8bD)Fb7|Q zK7kglTUAi9HnN;H%xRUWIdu~^&AERwJ;yCDd%fqPFL37aMLbYd0`bwtcO`hO-dNcD zO6~K`#OIBd(;(zkS00;W!s6<3$msx}gJCTvnit1ed?znnet3_J#&6O4#^GDL*{N(@ z$j1`YD9`ZBaL-w*oQ-)~I77Dc1GF}fl)EP8PxwGrx)fsGqz}^X)*4E47Cp?WZ1j$3 zS9DG7p1GTKa(CL0NVeQe@VnBx3wIH(( zN4Mw7PU_#E7!n!1BU{cv;M%=&b`^B?t}jE-B0RljCzUvh?jtTrvqtYI4iECnVTzi^ zuW39 zG8(~Q;?~01<%Pu=8AB}l7Wxjkc z{Wg6`q_gPl_f20u6Mc%leCqJNe2RFLe@{?;4dn;^N~ci5RT{jyCx>;@(4*zld#JRtRht4<8`*)?z9W7rvQd`wQ}DC$T6h`I;;!voLb`+i=wZTy7p%^Od$53wmFc4Gew8%M* z&{Oj^2&xKx(cS`zX-7(bO%&!!GI5`LKR{{enf&~oEi`hUew z)gb&-_TfiM(T~8-qi`x>szUr!7GD4X8w-Qmzww>^<~uDiXU)~MLjSq}Yygc&hgAWO zz{&QX70X4ygjDKPXppQEqJcUGP>I(A9uw|Pr?vMc&Xa~za+LVTU`kP0%jF;Y|4u2V zQs+lgidOxFhX7plk!k?7Y-W`jv?VGZaI%K%8xy9zf(Y#ua*5(MslkM(?F9@ZHTjPE zv-)ozv}@=D`q+m@QA00aL@24^5h>_+RBmeNpEazM0wO#*td2w#qT8_e+?PvDlIW(w z^#JZH?I`SnTbjc}g_9^qx}8YjSl$kimnDDF#&XE7LOcWjtNbNTik7D(lQ>rVOzwhS zcYo>Jq1Hx4w2m+;9#-zRw5=ndB6@fB%~wmlN?i|U>i=|gS4QPLaE{(K@V3jmJmOg%HhGm z&--*}-)Y_9mFhT5BO4Hsk@?^a4wdz?Xo^433x*Ik4RK z(R7`0NV&~xBc!7A^e^oBSx(u+@il=w+V3|Y{b`FPRC%9bb((E`JAIJ~epk~jhM^2qcTz%TrCB9$0VE&3IU?9) zqWR>EXw-MBlmn|8p+bQkq;Mx%Ev#s??!#c*+f_Go-qjpz^j#)mA|9TG1mi6I-j{gf z8i)0c-cYk?-@fjK1tngW=a!R3=0v}lC^^TCsgP+yU18geR z+M7Pz7^bV9xp!)TsReIk*3{4Nu6OML<-)g^1`ml2qVSJy*RPtr#(=i`b`Hh_jZaPR zCoiyo;L*rwIhg@uE5}AoZS>8VPG{+gai(4WRb$%q#h_ibMa2_r2{tVS+7i46)!gn5 z3>9w|yGc2jm0EBNGpjpi;)d=u*yEk6G{~E+H&S&d53f5Vk^zu4sZTmfSIYEC_slx2 z-{;Le5Pz(SzA(-lor_-RUQ?esrO)A%H9n@?mQf~c!ny4>UREea^UE0HMp8`Rldr{< z-G4auud99BnX)lAahSWahrONb?K0(C>uS=AIJe3qN-mRFGOx>>i^C>4J<6pLW5z%D z5U@InCy>t44JTl@41hrYcF_#v#`x+dn{xI+AP?)&0Zvub?{Q^-$#5_t?`NZ?X8j7o z;I`zW4_o!@Usden`Sf?C;Vzs$Mf#zl!d0-HKC>2-C0 zlZzb<`U~GD#K^lGX>8rVM_5b@53GEG>V=bPHq{Mv?pT#8f35<27&o(R;i+1UsKRCj zw$2RnuvxnJ+a_DpWA&spNT-L)Zgkzy6;ho#t#e7SLeXY#+D;?ByFhdoXw-hs_KELm z(h5U;FBuM=(OC(SFY~+v^lau2VA|LeQ$R3o;3P^amyj*5@S?pWR^Y`a^tY+ zyPws5%Ujj%DS$$n2qRjU|YFs@6HG4+(UVc(Wd zZon|{7}MYTHhdCRV}drM_jnuN6yXJ$j|oav06Kagw<%>@89EA*)s=iz+}NJg!oj~F z=4F4+3;tr`Zd1H!me=-2KKBNt46;XR-KImKvdUtj>ZaJKz*#o`d%nyRE(U*0q^a;Mj_Ipv@1f)^ zB=9V%Nh8FP>kd6Ewu3XDg%jWr1L*0n{u*;we@#EEzoya$_fRxotLuXPQrG>%{z{Nw zoy`_@-MOHE?y1g~-{04D0iqKDGVAg^zwe6+5FK{wxcp!G<5U)1&dE}P&Q<*}hjd*c z|EvDEL%Oaa|K0w$pv0*GBvtuu_s0cgP7k_uT7OJXBEEzT9A^>gZPC%?rBq z4%@BR`O#OxB56LVTkT0R3aJWv_!is4!CBEeOh<=3yp@$%-~O!lg%)2`@Cyxp-0P%A zx~t0>t#AIlkP@_e&|#HH1;W`JTPr`9H$8D3>B5n z*vn7;pZ?qwJj#}kW~Mjw1^a1Q1y>W~N7p^?n_BxzF#%PX5I!@C0u zcDs|~$RP>jkbvJ)L2?F7uz`geA2;PEZxLMrWbutd*0Xm1M=TTP;((6_G2v4_f-OF` zrFN^QwR%Gx^CFqaiPX;t=CXy!ME}Zxvig%V!LTiSA*$? zAc^i*ZFlYue3KNB&--dC{@A34NX`7qoI9GC;uOBinw#QUVR&t3wIXV76Ei2OJlpmN zZ+i#(Z<0MhDmfbrUkk;~1Or!*_G<7V+drA@jU{e@G0m(5B|7dlikSJ{OT<+N3=H&C zIW2V%if%q1t0xLvnX${~x3+*;`TndiIo`SLBtEFA%0n#qF^Bg+8oM5&N}=C6F1aDL z`Ji^JoW(V~vpYRLlB)C1kUI@Y1NhY(=~u7R=Z9)1jM3Y(#~U#N7xVsD9o0L@$LP3b1=nILS-fUt*xu+@ZV zTDJ3XHC`~qQ_bIAC#B9)N@Kz^l;_WV)pP_Gg?mQBkeXxqSkf(sDWxJ>R>>$~2O6q~di%$je2+YdPH|qz@HyPo%t({+Jl=)`0 zePh0n0D9PbQ%z&*X>23ou8EO0MdRzoq|}(Yoo92eC~oe_nVUYw-t#ctnQ07VO$3c0 zWt{_L45r&OHqd|lOSgM9(*t|dGDV{aeIku~B8Fse)*?%Oa&x8rxc((@xymy~&6;l& zGg4~z!g$=foP%d8o2Y!2cT;&t{(rCBS6T;`d-8yCbFqaUcB=Fu14Nv&GJhSWX5gx_ z=u4&Y#ZX=gn%P7<)Plw<2Q+skoKqbm6bSMNtJttVC`#+^6OjQvjx2DT*57wf297Ob zEW1mxZCax2?fm~CpB9!FVjCcz{`$WTmrv=@Rqb zezuO%r$RH+pq1&=G6Nr}cx;7wu1Z~rF#8q6&&ygju^vucC_TFf2EEE!I!9kY7I2g8p+n^PzkVitWA^ON zfp#^;eSs&%%oamC!@ggwDbPrNKg$R?i^b6~TOgHln+{?7i?a%!4f{Gsm1FscaBQyZ23{ zt!Ujw>N=Ym!}&zio4~~>8uM#o6(rEs=B?88c1qL_Izc&r|sgn4UV$k^u{_(jBxDu`uFvmEHl#6Uu?h zVT=m{3c2+e;(efoGNexygN)@xytJaB1Aoy9EUqRAD81=|t_i{h7ttDDc7gu*knE8S zHhYZhh0#<^nRR4R+2iyys&7gH4sJO$O5HF?;d-0irn{UE?2Qg7|J0!Td)tjkuYu5L z<-_@OT5|TIYGd@p<^$b4Z_-*kQAy48QJFAj$Hc%M`!!abFd1z4-=WgOv%G7LOZ}#J zmmMDzF%+-yxhshizb!uaQT)CRJW6Pt0neWXKBv}oh}~6bJ{D)1Kz`F`r=0nP4>nAk@(_{ zL-c2s{_E%~`R_4(MW4+uB1$#=^|p47Kcc_H&b4~*TX*SAgShoA`=*IQ(?h<>Vu(I_ zl9$6`iFB9nexxR+PNsVk0l^tfV)Z8a zM<_ANULnK{)g-h4c>t73ANmajzF#W6+k{BrOZo^h)wU^9N~@Yg%{IoSlx1el*$6HB zixo?=#Xlp)XQNHn7j%W?D2?|*F)EYX^#KTlh082(T^RwdKV|OAI<_B-a<5J2NRR*t zd-Nz$uFP!0)cHuugBqt$dRXdcN@V~K#6tHo47*-Ju%oLUs^CepH9$E+hX`D~N1)YZx?6lt?y}%MZ7+(ZSh?Y!W=C$dh4sUU-?Hbz*g{s;;sZ*({Ozr0xujgq92v|OijX`U-_n^|IhH3SbQ4ean zrhk0*?dMQ#Eozx-xHK-4KGXL}tD6YMy9bBNol^T?JD;hFocjn*VaG!xnsNc}CdQV^ zJCFx8K#u^F{F?@Q-{#N1VK<=AvEaX$=PmZE;wdZfC<G?3heaM}U{%!ppu*pPU-s zYxPY7@CBCIEWW_p9Ra?A_z@P1cbd>a{KMiqi2upq@tXXUW_>!|Jac|;?`^%E%}w(o zk!vGn+g#=9A_kr@=V$FM$Bk~5va~Ze&lA*-PGUh+{TF->&ny?SO{7Zpb`q7KF%Oyj zuOPnM#t)k}lGxbV%vVTEll$@~!uVm$O$%h`9NHHszhDAa$B{KIy~zKNS$dId+aGuf zQ}*-E<%EiIj>)W;rq|R6_ksl_4-C_OJE<*T!TQ&fFPupKg1L^dyTEl&b|yImONQRY zF>E!+S_ql%<&<|;W=foY9E+uT`o#W3Ycn&5h^3zep=1N0a}B{(Y&MfYtZ@H>7`GTi zaRrG@T~hoJBof~Vv54dfw~%CDe;Ron+JbaP0qbG1e4U1#ZmGQ1l;RJ$R)?}|=m*#+@g z&HH2VR8o&b`Yr#fx(4obZ`G`}?xVXe!M-ZSeaIcPPt4oJB{CO4jHz`sn~c7-yFB5p zDyiK#uiKjWVGT>qP+=l-{qRJpl!5Imox}a3pJVdbQ?p5zopG3_y@aWtH#@yI+jNk7 zvI~9V|58|)2)@i&da=34{CGT{_~*w`wMgEnqqxj``6 z*S%xDab88kxbf~7?#t!AyLYeXTzSuPjO=Z;moy(!yjVZ)MD#^-f*}h9aDst* zg|Wv4=%(SB{c)#dn+Z;&3*xalJ7tdZUK7vVFtqkf@1R$hdp?A~_GQ%Vh`VctW+xut z0_FYLiSP3`ke&DekN2|^@p*sl2ib|Zyg&CtuCANdJMXD|&k2y|n_PdMn|2B2$zNVu zKXOb#dq91)x7*sC)_)b4YKTKy$?7zszAVhZEHRxm0}{3U(yfD|b%RmMk7 zqsi>|hxFQibtKo0UjpsLQ*m7#`59;v0!jT#X8+JxZRy?6@!O)~xS?aVzo#FBh_ll_ z5FHmcDJlNvhNjoGc2i9XkFsG}TuV;>Aln2*H0{q$@8RpiY}1F?>HEpKt$3%QUrN6% zS2;HtvOVQ(FU4Ank{LSQlz&KX{O+qA!CJvlZXfJu$$a+QyN+65%fYsJTBwUIPdTxC-E_bHyUeJ{9g zIJNKIbcDB30p#b@%YlvqvD!BWSGvCF+59&jmcR6{{N4*4y(R7&9~}|4% z{;*KqhiND_s#d|>gbDTwnx z;8^&r>6pak*7e@h=_{t1kBwfNit?wq8>SxeGi2!BmsQrq}x_+rao4Ccd&SUT*{A z>xdsHAJlFDf;q!Y7hl2r?jBe;cMk#}W;x9VZbCaY_cPvBPFr)W>Eq2W_b%jE>YEPz ze9wK@zAwAu=zIQ$hH*o3N4_k&fy3dQ&izlg9rYcBVa2C~X5DY-bzSbQqhqQ$?#HC( zk6@Ch&y{C#<=^w3sNFcnDNf@Hr2zr8o3ERMvMtfNCnYxyW+Bytkgp>c72OS`Ra`~V zQ_AwZJw4ogOlzJ}R0Ud#eJSEc1{5>r;l71jgCx6C4W%_mm#sqiiswK3MYE!^d5dO! zDN-qW0a8KrcF!-tHOhuH1Ly_L=5@MnaiuLNs>W0B7Vqi&7nly*-jdX(xGK}|zqv=N zoG~hgKATQC(uf-~D%Ky@hg+Eo+5fEBgk?R=2>e_4<^wH#uPm_kq~FceectRnQO;D7 z2k#tiAW!~_g!sN*RgC)jF)_GVUfspvi?QU|lYS$6yV;-dt4M^r^#yK_HrdS0caLcV z&+^7zOipER4-85Fb*(FEECFuQCO9ngp>|2prgpWXb06^SxhgyVTS9$Pjc2MT{y1PL zkBJT?FRc`e&2Qa;CZKtKg+82#(<|ta87wiAE9zA|=NJ6xoZj?yxH~`T{{Y3Gi2O*pI#^u1aQ%xF8m zvvZT8=H*(iC%VPFrE;-zh?$?8SOR&AzQ*Q$lDrv6Xw>vv?2C`_s$tB99Nc(jz2`0P z@*FON97Yk*RCt~gz}X}?hpG)9mN>Wmo)-eIqLE2wS@}?J1D@r$M|jmKW;7mfoMpF| zVdyOVFEc7RF3?jJUDweQ&z4HF{C~;NpmjV0`~Ox=!$ETCa$mQzl(Vs8qq8~Ai3SzL z%NXa@t+oMZ)|}Q8nMvFaQRV79y!&AcVIyc~%W1r*jTD8JFp_ORMR+hCnUp(I_VdC_Ralu;tV zpd2w=;8OM&>Yw3VThY8)+`M@j$34-)-n3*=5z!TxK;p04!X)#RzdY)oi zWqw19N1SbdV8{LPaU#`*Ip&HS=FG^FxQ|XdE>{aL^4YyQk-EHlbzJ@q#s4@hXA0nw zzMzEUISP&AI{M#(g61E|Jv$@18{)WtlDgJ+rJQCStZu$A6#+Z8J(QYSPnK)LlD?}+ zt|4B0$jHMvU%5DFcDr=hT``H?k^JR7U~9Sh(=^S%z@0mHC@Bm-KlfZzeksPT;r~-L zuYtDAPvQRtVWf)`o`x{md@MAACTu+0R6NVQVNS&HhLgMSX?}7IGKn(A6V7>LlNJ+F zh_wWze)SjZ&Rr z+Y%0+-A+T7RDth}da1`%6wmI}bjV10yn8iRJ=44pmE~ng#%cYd3E;rmU(8DtVy4r2 zH2M77Gqf1h_^m(TS<_wfw(o1bUu^I%kSRmCe?bM0gnvOfk216*rpdi4siu zu2>Cv)LwTDdrpjEzLYDk@k`vE$ifFx|G{aq^vht!C_nx4;-oZ$a$X?A#PTOh zIJB^^q=j0RhE(FTAovN-^)v-isphtLLkgA6)szu zf&+HpzGhz&zPrV~QTDU;jj}iBEdXbHST;b6;*H_8vzDn8$0(f=ROE+*@oqBX9TE*yf8;5s0Nwsxm{=H6%hnfAM)! zYvE^D6EMb)i=;kT)6TuT8WGV|D9yT$R!7#ZT3A%?6iydiY+BB6j1*4f9SVy*6iC|L z7>!sdao~8Lt?`a44_e(lDFv<<^X4pDEL}paG2wM?yO?)vM?Ffh-4o>NQ?tDPrwqU7 zGVJ)=R@3c&KNz1E%Q&mtzqo=&!oRp&~I$<-L7{Equ_w+i>x1>Dlf@DcSGV z2kfozjd6(NZDIhKzhCqx&K*#+KrKw=r+ZQwMC_xgTF=~O3`6|gvL6UJl>9^NFh%oyLD1pmoHFwM& zHp_!tFG%1HD%(`zUr?59DuqX8n_}pFvrR+%qq9?o4p_gtZ&l_RtvcWnB)NN-y37%4PS`$Wx~a>v<-4*71~nVH{7vHI}Ce9OF^oJ+nADuf2~d zOs%>y?cjjdNLNN96T0F}!-r~nahSlHu!Iu@ejW3sVP?bfyy>qiqw#HXXw2K#oxIr` z;tmR<`mj@ZDnz18OwYXcuG)#GJhL8W)l4&ptOyd72hW6_|EPH{(`j_qV0_vAZdO;? z55Ag4+Eeq05hr9;N_i7WAIJAre+{<8imXgQ-s5H zWJk%sAth5COeOB$E@c@Q-2f1U5~A4uG35{AUR_N)b0dX+Ca#ZYb`WTG*EJYsLQ*2Ytv|GChEc)y zdcOP47ufkix7CkfUtp|{UniveDi#{-Mhjn!cXJm;G?Ym{WU{J#KV5*2n8ifkFTtK4 z!JZv^nsYr26aHjwD}bCTZ>qshWvk|3`d2&Lv7f5Ez{u!-RNmc+o%dJPzvH2e^u~}! zYCKr@X3!ni`Vl|jPcLH!leH@=s%!o8B^}n;R~c_K`b`P%arc!Hh!} zSt`$LE!R*H95(5`Tt)1d)X}maDdDG4)6W=CsYO%L+b!>VS|d+!?r+lgXpF8yY00wD zY5BOyAo0WEHi*tm(ROywVUaraeqjf1I@YZ9Wh1vn(}yN`9feg1AH*eF+m|yQBF;sq zVF(k4swBNsDOJE>I24Y~mX*i7?SzeSmaQ^3=5f<~eDt~@X2G6MWO2=kCce(B+215h z-7yt5IXR^id(<%>+u5jKCtBLco#M4;y@vTrt}Y*n@7c8q0YNFV+70p--Ct)fcY z1_~vkoMqLe7-!D%s)unskbB_6dB=F@be;+{JCRH;nw|Y3bS%(Nv>!c7ch{CV_it!k z6{$BGY8;ZWU3L*3?T){x%6o>}aF9h0&Z>QG-qS>_P(#D`g*&OU+U<%#3FVxkt8x~b z%~1&nR#+J4(LbFmkx4kyuMen3#3sY>y40}>2ZLjymeR%)wAjT0dH^L&VN^o5p=;f7 zpdogz7#c51l+8AT10Y0}(nLaGOZ z_$Fk`fRO(*A?D;>kn3Lw!3ER<(is^gbXeSlCaDzNVMv_`nK2;bbY(WUz-p*4g)i&0 zN$vjbeKt3Yix7i)a}8~sgfWeE!evBYO6ng zGMLEj`QE|aweICKjWwVqWo8)EY$gO<&yl__)X4fwX_izGa=TEYbGee6meeams8Pr& zs%dGT|HYQ}^st~*b#JHJQ}47&s_27g5l(@^^XVoqYpN{FBiO%Ph;7{jb22`WkRe*8 z5MrI*fW=VA===?6bCnn;RsqmOx6Rg^D3~khnE&i|RpA6x+4o&v7&+)WV=eq8fB03Z zpEm!2_8eC0mrSi{^4bWRObho=!5!qo5YM=G8UX3XOdcU_Z3HtBn+J1#1J7Zpi#jdk z3h`?>i58^JkXj@5t)S-?;q@hmb9cTJpzq&hoV8nCP(}(N}{+LSPKyi(PmWK4P+da$G6^1 z)?DMK*(UPu(>9U6QkzCw-zm=6IwZAi>D60TZC#K&atn&XDaj+Z4w+BTUpls~|5KUn zPb=HX5v*;TWZ-$^)+fZCcI+qO*vO7mTh|YaR21F=j+Y6~s?_N1u^((*zpXIm$J@6) ztOb>#f)_HIMConYw-igZZ=n(OHSJsT+hdE!FmvmW1%j&G_ceI8>=AU%vT4a9mjV$h z_I?ltR=@ReEkAc~{abky_e|v6(J?SS0Ix(9Vlw3Rj7Zjb z-T4@%z6P`Jm!$At5ZLg~MaOW{4Y}CoaYAPonq&MW2EWUN-(qc>w_~~Yr=IeTzs8%_ zPVL0Z;T>*{K6ui`o*|KY7DYP_95H$i4LTxn*S_~>c`*mumGK}vbs81d`ISwr+ZO)W zETSH@_^Whgd8s2JL9+B#`hQH#`bXD%b-@V8q28~&sQLY$Es92N`kc3=W|L|;vn;Z2 zum63akqSoS%C`#)|88NYtmp!&g+ris-005a}AsZr$U945P}yqiM!r@_hs(8 zGIDCm4CGP&a&4?`a_(p+f0IU>XkLS8Ow5RC_&kzGh*Tr6yd({?!K<7!LiiAjC;F@eaYm(!12b4gtO>26Sm7~ zEvoj3I=9p4UmnZViJ?yD0>Z3_69`MZ%geoq6==4FE!GFEi1KL*fz$d!gTjRHc8iVg zgLeTAMMBuy|C{%Tm0p*ckJLx+I4w_+fz^@vZt4?%x;lRayvtkDHPPS~{gx3QmU70K zj(*#SPJLzTzFH$PA@Z8l8S6K%$2$PQuqN8K#ofu(S~!|$(qczQ>FYObZ1uS9>QB>u z^sO|#iND`}SJ{40ueIn(+_0}0lzn}*3xU}7ra2j?t`7u`S#Q`?^}%OZubyqWHF^L8 zP-F095svUMjumZKwgSQu#;zu(*1)Wr{}{uYnt3h#*e1AQ;p=<^{2q^8ti|#DcD%w^ z&rT@wZz}ia8lrxTn!PnbDtGKKNKSf(^4^Z7-!5QrVE0c%f2vpg5!9a_x6jUIqHtxC zQ&{6WoAS*r^%*xJO!q_&6gE+5(3z3-bmpzMs51+nq4W?w^5?nErErObPvvE~yPz<$ z|GP)=R|W9fF_FCXcmq?_ooCrzocX4CR*XrTXL&wjo{7i-^DJwz-|<$J&Fr@;>fES7U#|xA;-SLyr4_4YXbI%l8M!yY$Tf{w5{gVEz`wAE}AOZJHnT z+N2zmFmC7L!SY}#;r2KS`5AW8sh)ANV?;2)^Hu=gWRCqVmol)pL-UQIs$R4L!x%-W zw~C#I$m58oTJEp{J;6N~Pl?WB(}G+FZl+HjTt_z7+Pz!ALi?;i?b~8tAIQH4xBs>O zB|d*x{6A{{PEsGXck0cBx}?PVxM80{bb#K$)djt8tk@pFvG&|-CRC|X z=)BT{6FhQ0qBQTyBfKaqzT5J{Y*0pifexWLt=|D=%BpEsX~B4BN}Z{#6xYNSi{_!JpkztZ z>v&WVPV3A3%2R7=yVC8e+2p?QL09Z3J`kN_wFl(t?boNMB-dMJG7dc-2g7s)x4f5Pm~{>EmXMz-Sipm0MyBUBKD6toO(Q+jJ@ z1}r}#6T4$KfLo|VM+e! z+P~HEyrw(421F-upS;Itr|I!zu{?YHA7bd%p&(9}uQW7=^S|GJqcK$HtB zsEeo2mu352^!Dw03HmgC_>8?dDlT!9GJ53Jsp@vQ@JPT$ibvt!wqx|J&96rH46jVq z_S|#=dFPIIdP+A ze@?A7g6=b;_X)8yHcG?GJ^MY1Z{3t$F?u&Vg07o9oK)3?*FdhybnY+Z*beZQIW3a0 z7*0P`n|ZbVOn67B!V%nkEPw=%v-I1nZzH`CnyemmedW3*wxO;d}@Ot%kX)b(*J>gJN<2 za|{>?U@x$s12at};pv+B9GB5K86Hi&bOR@5oTX(vI5!49)0=}*g7&E}>(@t|CH0d5 zg<;olZ4ZU*&o=RBdY^HeZQ9QpXL2|o!%3Vb&TMg%$JRBVq64aESx}Lb?B~&UoVZc@ zmo{-cE@}?6nFBW#s(j%jlE6QF&b?vHba;CDD?AKDjkJl=IboY#G9;)=EUuU+!L=NzdaQC;Y8Hqc3&$ zTvYxWKLt{7bK9bA<~Rq;Y4g zYfiUH?Rf7dYNy(ihe2jXei(Mz=pMwp4%;-3t%E-pP<1KK*XfVLk~DLZ1xWzA<$U7N z7f)A>A642SZ7z|N|I`xbN% zWiA*zEXnf>JHZ3DmyY4E_~X{w_$upbK8V-S#F!u?4Wz;z(~PI0x# z;h^`LY$afT-?C|G#iH&~RS=PX0nXNVpt8MoUa+*0_8z6_gE?UD?N z87o&^=5-jBRpH;6pwIj^*$ONtd2jRk+9sZRq*ln9uWWui(hxfD&CJ8oNJ#&jpE?j+v7biPe2y#;S1e$Bp(^4+|Bt8V@IyB6ASL2P zvB=@ou5ZM*sn%GnJ1wsh zV&T*x>L3RALaR&b+;7hR@c$L|!Z~zP$D0*d%niH)9d9OhsnJWEm(O7qH3rcRro$3g zLncGBc*aLiInP)Y=&+A2Hd_ga9P3Uq($Ikv){G3_EMn-M^0Q-ENoi_3} zeFqCd(`pfc)3QYcyBU7vRrMEIG%?>mdYtpUN zg~fymH$N2#pk)2=w^_koP2pX}{`xk8<=CjVa2&t(z8S89qTgCKkzZD|l}?K|l39h; zyv>zznC&=AOImQO@ZGM;p!N=Gs)8% zTjhwPJbjH0+o99oRvE62zY$+mTbx!YytsmiicAYR7?4zA%Bic${YP|dv?}!}XK8*G zV1SeI!u7yRdt2W&a5;_n!qtSdDb9o#9?t#0+fv`d)QDlVyowrFnv!yX^4j@_E|Z!e z)-LqW0Sll83kLR@V&f#xjjQE3=}@e5R$$Z^kLTYN=}50&!i^^!l?88z%LcXJ?O@KlwlLoxu+qcH{=?lCvm-JU*#5m$OGQf<_Kjqd)7K4 zaegfSLu{Wk{H0X$hpvdkcw89Et$c(E`ft+;*o7G*-mXWL%55(bxp=PFnzy0Y*p_RG zp+4~S?fdNt^+hSsr-f*8Xm2Y2>l(#o`Ra1@t3P%YFZIod7nqufOF!xD;d;AzCuWsV;)`pU7dxkRqg)+f_Xjo*4anKhO2%#W^Qe-+YiU zv~cctJGA!E6DD!`k`bC~EUysy393ATpHGb7=fscm zbJB=>szX;WDSOF0{1T;%PvX_1t~k{H3XT$Hn8{TK_~CoUI7_dK>dx!GCWi0f9jWz- zlHq$8btt*oQ^PP(!kneI&%cQgE)$ed#Tq*ao#~K$j6Dig!)DYY2EPZk;^D-wtsPvF zjPJm4uaXu1#_vzax4!5cOF4cr`sZd76-}EE+EeT)o zWOSf_xd9hw-(h zS}QGuyn|i+95GBqvttc)=$4(KkHY=pS-I=sSkAYxI>Vwk=a{VrCIbSbZo|#&vE4-a zB0?aOayHWu@NCca`O~de`Y+@`VOMh9T)%8wHrop10$I&w7f} z)!Ha@N~FfkG00>cMBH-WKNbo7MNl3UTLa~Oj5^kDobs9?I^|Q$_1Mao<5qVQ8TDSv zyE6x+bnOgq_zE(ZedhTfaO)b%|)rqKd$hYN6`%KnqGs+=W_afpYhz{M>`YyKqB<2B>w|`hp!E$ zBr6tLF$XOZtS7dSqe}+9qYq3x{=SJw@cM{3!zjaKyO5)}x_lYz5BJXggnRkSrGrhp zoyqQ}onkD|ITn>`?HH>Ft}U~T?ZvN&wy~RBM_I4K4oNpo!Z68H2&$iuu7%Cv!uCnoWR#jDym^|9+t1D;&6JOr@BJ*d zkL}jbItTU0e>GB;1{@q0^idoSrys%>HP0HoWYyim3vHf-qs&-ODf0HfHA-189Ak~2 zGp)IlcfxpBbsC=Fx=E}$KE+QL{*#UTcJ6Ui712e$kl%$KIvvOvNyrO_a4A7|tO}U) zsC_7T%j3=P2-L{vGY0$aN$oS*k{vJkoa762iUIuZID)$w@j1>8EndnXWjfulLgQH) z-`ugTt4Jjt26MQ;jHY$KF#I#6XfqL`*OgsceigFeM-`HbI2f@fS&{_L%&>fjF{Iq_ z6_X$jVihyJ$w>l>ePKGe&~B%=%&~P>OupjI*pCH4CeMk+dwEwDhL5B!HNGrmY8rfh z;cZC1b0!@HKg#Z0cjbiZtLvvD9^Wv~a(fM*e*44AKUz$!k*9JW(&ORW1|DK2QNmh% znYDU6>wh<-HhswXlT2?b?H7?3F)WY-O?(b5E>uz66C1(p#mpC`!Q)llIJQlODFv_u z48d@8Dua)t@{G|CvpK18-JeE~;2{^H3Gwqq^!VbI%nnJkR6ln|~I z7p|+X%qh^Rx13y9zF=MDRaaKWehys{Pgtw(@!E&U`|B~R{LF8#R?kVX_wl~Myw^ZU zaN-mEo?|MJltGpYOe#Mvji_c2LE(n#_v*I!MNSXjAomGoJSU<<5Yd<7I&k%<(EUC}>(2^S;`x7LJZdj!gIOO}pzvt}#n zX}wt?Dae3p#;#}^|meqo~yKx~Q?F6?&sLad_AE|m?1 zC6`1aT)(8CKapNSrP-gZE1Pi54_rEd)Bj)u2ygHssm(5#D?1?bvYXU{CfV%@1$;5% zgthuKYxR~{flby5-G^jv#l|}m;W^WgpHB0bDq@rRAUo|{GoFZ=WJAf()>sMXaQtxq zPv<#l18AB>T9T%hCTV&IOH2)keE`K>M4j26H*|?e+3Av!*p5Bshz|1GpWbFOEsLho z>e$be=^*sBRu6I_xxf!e`_qZfGBFvQp>6T3Xu(WoFX30bKAI#5M+(;w_L?bD1YpffLq7FQc{<&G_cJ z;I#4}*)F09Xae0w)H`r51z!w)-P6^(!16=VM6RzJT&s+BM^a+*snu@P+WE5lSfF*m zAB1Xl;NciC6&yOpi21R(BBm;M zlJ}64u`PBk9-PqPRI#XOJMEn>`Zz|+8h(ld@<(63LD)-jOncazv}uZvq@D~=R!66k z+pxR*QxY!^v{l=YGSOz(UWX4iyYC;lw0eg3-t`&rqZ3*VO8v20tyTLZS!u66N%h@zKUrpb!Q=^26cv=2|z&`8#k5o0oYcx2*vko0iviE4#SYUKs-x#XsIjmB%G5RWS@O*Ny6LAnj$bF6 zC3$eWZ?2PU8Y7W#lW$Zqbb^_#A z`wMDQ{B(Cbg5xBd!i$TaL1$RoaVx;=8(2C;aQ|& zCAqP&Q;bPbj7~fq)D3Ni5FH16$LIxupJmhQUl3S34bCzcCk6&rVCsYAS+rbx0h@_ zYGp_mJh_am-R-dSuhx6F!d@yw7NWJJ4&#{>^+^vY$tPp_QFcbzsB2z2HKNV1sR{|@ zAYy;T1`Q5>j{c66J#D~O3jF3vG5V}uHF-DLzBS%vrVN)pWsncGX-myMVt_ver$yV%)rBOKkca`ej4Yb3sQ;TPU>L?`lj7ijmjHgs@BXU*te_I^1mog*1VP zEhgDo?OfE2=GSc1Y#*bvd<^MkRgg#qx!>#ueYT)WXvj;lq2R#!$4fDPy!2e+68WAq z*?em>K^mCLPp-iJ(5@ut>5vwb?t!$)Bwp8%tKUSz{UYA{lbDPg4^{RSQ1TWxc{$0h z|ENOvEfPPzvIL6A9$l=0FY*?xN=>m_!e5mxtRy)Yy+(KDnTtkgb!N0I_hjXqNlui@ z;%HgUDMp{W^RdZFC)NU-mdVsc{Zt*B2F79ch?hPJsSX#Zf(nh{?(r}5@xPHD-@A_d ze080Xl>zc|6Ng{{J3xNQNgE(PHxUzA^7Asx(qDcY`<>IDEYqbZI>oSsta6V_)z7mR z-p<7D^o2Lq+{blRQ!!m&u``kk^mD3EA&kfJ$yWuT&RHtRlL^o`F^iS}(|BqLa1fF_ z7+&Lb6v!6F#(_v;g#5P)MUMhC5W?orz_6JlIP&7`AFxt`JDDQru<))496m4j=GZMu zLrwcrt;e5~zYq+?S8c`Dhrh4CzqpmZVq7WOR5oG=&`L^+pty(5t-9wy>amW{oMgzK zK_=u+VZ_`rYnzAzZXmL-*4>@GiQXCqQ$6)2Ryg^cW#Rs%k|}*uN zFkhnFX4mSt{Lh;F@xLO$ z!M8{-9_%^Ca;(R@q6H}&RAr;cev>y{c^)Xp1vHIo zx5Qfgkf>)Lu)CjuY6K$4cG&1MGt`vYY#%mRk2kxUNaxX&eO<6tO$n$!vaJ>0HqhLL z*oTXHjQgSN0@H--Sq%g6AMD^?;NYK{#DB1Zz1PM5B|^gVV*h&h=wM<0a}bRybcaJx z!vNr_1SxZx(FAx#M~nCk;^jK4$H(hF)6US;!QkUf;$nOy5m2^c1q zms!`f;yA|TEC)jSFhcSKtY)nVQf}4#UJYZ_mBbQj4K9E~m%rQCb2&5PU|EFd1kq_; zv+9E==0&Q&X|C-cDHid%JRdiXd#NAwdviVC?v1^L-G>3e>ho$bNXnF+9j-h9)z6I2nAN{ z0jD?e$X?vPHMN6rQH+)=)K!iNEuo`#^CC}Z5Q~nNomi+i3BhlgDDSMKrg`ln`8&dg zm(^De@>tTh*61h1eCCE=r9Yvo9o zY8@psJu!DAK;_Jy`V6j%@&?{qrqf|kMfhxFI<-o?>$7k|awikcdZWHYCwl>#6KN1b zB1Z?K-}45E5~lGQsA=B%NhyX>Eul{G=h%n5O++RO(nT!`PRnl*O|!h`)4xcBy0$a4 z->Ean;bQAjt5!tegT%W~8IsDX_AS&vfAKcLA9=#CnGx?&viqHmC^M2i-nq}ALG0r) z$8_{eBL8g(ri32J93&+mu@q7u9@+*N34ba7iuqS&G!)9iZ6@i24ajTdSw1dAvK2kK%1dpht>>N!FkR zFI%hMUgx3d`BD%Rt=@==P>cEq5P|@X*!`JqlGxQakZC@gP2(A_dXX=kSxS z;+%=f)yp}5O>;O0eEH_^O+WgS+Jr$7p~@&_)YO%zwW7wNgGOnihdD3;N{hSkeQy?H-FZ1v|Mhs-F&{POJvI-XsR9WIwec=SGx7+!w9S@Sq zs9}-Ebva7bktAY$wbI|ubHu_Qb zCQwp-i`}WNCtEHkO|-(_lTj(P+n<;_#DzhW{|d!~jN_ecG?p`3CADMxLp(NA%t@Av z(t?8c1Pm?Ct1`y5(or%C;uk9CiEWT;sC*tL-IF#*VdRfeQ1%yz!J_x3;JG!6Q+rZF z2O>`^M31#5$lY#_^Zz#;OC-_m&OhD3mO2X^Q$%}t?8Xi1Z;MzD{86561MHE)_)kcq zA(%&pn&Ly3?{&?ia)Vl*c_d4~HIHWX+DE@~?4!ynLFusd_!eOm?`Izw{g$+gDhAn` zoTX>(B8jDrRYleV8Su3AIF1)Xbwgc7X8g#B@tI)osW<_thTyLTv9<>NB36os<)D=$ z)~gO$2@@Afeb$SS??f1-;!`pJqXW*Ebz%zjVN@`%^IUwq$9Gj+5#_6t#loR38 ziqppcd{&e2Zx~7=V=qGu#AlO3pA+EI%S?2!!3Q=f9>7K^1KDU1UJ3)*s5m}DJ{qu* z{kFB{NPj!q>9{@~FFqEnulIJ_zu|GthdT;+-m?R+@(sl5qyAV$b5i0vNq7dq^u!PK z_TZ~c`-j>GdM5#6QSrT#fXEsnd|x@j*Cu)m>haNk&pZ6Icmizxnz|ycX#o5LFTLQP z!Y#Q5{1 zNo7GUPkb%A?YxXJFK;3bXt{#;KIqw-I=$aZ(ZTpZfn*9w+`0HVd_V@qkLWq)mxR4& zXy`fTDfijnJ|A3Oi{H#V0^A2XraJ*C~a0Ivh}6~ z)JIe!pL3LO6$x%dj|gO}ZI;&3Ou+UAG6_b{h)mEX5$`w0@O1svoYvY9+NhpF+Kx?vkd~YmMM}MSDbv#K+)%~ zmmMCP(Xe`U3Pp0c1u@OMKqWlBgC~c%SMAd9hHO**W@>phuXN4q|3;1nM;5s}k*H;vOaRpKwR8n{nz0E6(|H{kw2z4yyO|7NdBhjs#5 z!_rT5I+2STOKsZOnPtohKL%O4XkhZW-+sxr*lRPWba+2##51w~#R-%az)rF!H%5l% zcwn8W8`xM~seP`<2tNs&h`G|oO^_!=?oCgfkdD*Y{jZBa+$p|3Bk)paug!+}Da@#F z6KLf~GzFs>H#hA~v0q9ZDFF85=j?Im#(~fiYuD6k@^jItFWXbsrcTJP$N5&7Ot|4h zM!sKU+LoR}1(C9J9}Vl-LH5Yhwc(GrsLrY_6<*~X1cu|X8ljOUq`eTt6k-WV-aI`! z-0bF3c9T7HQKY<)Po^KrH;6>Bm+t`AnV%ak1kG>2%E2M=xZx+F!v;4;%G;t#Hbq8u zfEzYzhN>#1WRifW|JFS%ky@C$ZK zdR7UlA+LCHLOQvhOXmKq7Rp$RCGBC-Vz%>cmdDjAZr<3BNpDz{4Io5-%cITuzu_lw zQ)`;O&{dw;M08HnSBi%u0sK9juZy+70B24H5#))uq#_}Ud ztgeU*i&XofKl6B=njLvYf8lwqRZNdE`FUz~_%KURS%3&1_FJ`4^MiG`N`8pDAi$*e zIEz;PG8KDbnu{d6&eZ8vl8C|@{-n`F?$lPJY>Y)SkQnc`|F-cIf3;14DjqA6WM< z62xJGxH=PGF#FZzuL7v2cDpt4)zPM;_mDmLWgr2^STC__fslAEl1bX=QwU%?Ho1GxN2W;7BGIy0Njj6K3TnsHS+LqSCAE~B8{ ztcISgCM8;72s=Vw@zRKgH)Ig;gZ_~|j*R?M6mC7j(J#4&^kn_PyeGV@Z-(Rx*^o~K zU&k(BXt=qVu1&F9awrYwIH=d`q%qw7ktQ#NVVSZfU#tmR;eGd_5x`;?-{L z8S${5Ej=Ti(6jvYXnBXpy-B&t-@o{lj-s}r?xIf0TwMOTQ^Q&I`mXJdsD69IfSRDk zx+l(fv25*iAd=WE`hc%I;>&%}sXlvz&x>M8^QW$vJ;di}q;33C+aBqrk&hJcMkrYb zrq(?25oxBCc6sM2)nk``-ZSE55Ca)9Eu!0cM(lFldq(_{9|(d^kWCX_H(%0Y?YFRw zo%}CJKOJhSr@o#MKP6jaYz@Bwi?iCdBj1w#O!miM1FOxz^4ZNjZ_@o4bTe90`@}t4 zBg@h`T>Vxryyu*(N%9{*-ri7j5U$BwRZEos8y=n6tz+n%Q-)q@ffgD8C&I)Y1$jo* z=HQhMWrQ=K>dG~0I=HVA>h?(U7iDKizT%T?m_)O&?MDqNC_$Qn8$`BhrUq)YONRo6jj8(R|Ir;tr z^MjnB4_ebiUhz>cLiJ9^B(}KOgQq%~L}wQe@#mB1Kjr4$8QaV_m-v;-53y(U_M0R- zHKdl7EFV)*&L(skrW`gnH?|J*Vzgqh%HKIcf6iJyX7cyk@7((P)VV^-ZJ&D|I{TTa z*E6l2&+VO8X0hU0mXaMjt7v;eWMW33ec|BLiRpot=4Y^$8*a=C9GD-|(RRUSKgzIE z4%4?n8xNJyH*361UpQ>m^0Cs3)I1Ek*9~;guvTd?#hgUNeYmPbs+z;#(&sf<=JCTp z(djAKTp)i^qLuXoUG0?@*k66F1{qBruwRUW#3@unhrc7>@3`Q}zagjS;LUcYiP%Cn zPAS?M{wTcAJbe!Q%yn0PsjarA#O#4(jyg*HPk(V484s>%Yt?^|3>T`hIkXR(i9oHCGKn6Teo}c<{>e z{K3IUeU@S$DAY?{VAK4#uJHpF`x<%}d$G4Nx4)fsDqaxn{Mft=IPXIYvfh45)&0^R zr8`9)af+M+X)=x@O^fsKlt^iA7q?1}f=n({{6`PC0Pji5iHiIC7jeSTW3!|oLL$6hj8ZFr0ew02!QLrHyyUgL!A7CMb z-`!JlcyegGA`_Y4Q$mDDA_SMxZwTRNR*`Ccj|+WWL5s}q>qB^%SESk7!h84B9I6an z9Nt%0b9l&t(RlJYHS97R5c(q|t})|Dqa*i^2rr`t$=EaEQ75&o(WHkyNWA81fbUj} z)zNkQw=(9BSROaW*oSy7(9?Wan8_rBkRGd5)Ufv0 zo_*Huo2{~DJdNrGlS0@_CmX**b9zDP%EY=aVZ8RVhoR?gHZ1u!hJS^zc{g}G)SK7p z`5GBW%H~aE@nx*y(5t=x+VtAYB2PTCDM7en`;wk$&7Wk;+fR zJK}+J z=#+Oh>n)RJ^KBw2`d8>;-`?nUomH!7`KX1>yDN=c<Z7E->m8a>8JbK#?^lgsbARU;aVLsE#=7S=P{SUi=3<^1JPVCI zxa|xqTkh-ZZJT~j9+c(FYziC?r?33aPFy~R=K1@vq_@2>RH#8ySM%&{zt@)-y}NBE z1c$4?a=V|)kVB)AIqo}EV=#uV>~RWjLv}t5eFEF?9=q>4gq7P&O)wv28h}2gxBlzA z{K55K8N?XJeUR=hah76 zr_J~7-QB*sy}7|Dff2B}-2Xw%(X?P;JL{4EOCw@eoECMq$G8KCb~XQ%5TTx+Pb~*W zXE$M11NMS+Oa*4+G{bD|F@@Uq?2KE#Z?ej^)ou?3v5ObE-Rli5wcifE>%|BuwQBc} zQRawMnl+ZV9Kt|+qy%agNo6H zeM}xajTNs`7=O{1{m0+%hKa6yKpBaI(YB`2wAYa*4TjRDv5zM^inPxJVX?e~-Ywzt z05fEh1k)9{zg+8-GS$3usB35ZGDcNnkL)Irk5&IBO){AEieoS%zKTTb12cl`cS2yI z&wB9-W+`s*D8jxCqv+10ytvp0%y>|D>HlleHDQfa$DD1IvSCL0)BT@SyX%4R+k9od?L_d#_3V~Dn0o;dEEK|`BxUC{u3B4sD8jdm8?+j zp3)7>|HAAD*Q#sF6A}3?^d1kN`rv-Pd1!Zb^2n9;=Z9KEc zHil;gPe0G}Sgl{m11>qZp)`2DAj9oWwQHMSWJ>=#XMUnD46kwt*`E06tOkRM5@BFY zsh*?gqZeFO%4jf)t}yaJ5P09gjisUV$oKq#@8vGdtofH8kI6G5SNrRI!${Q0aQulQguX@91S(?qy8pzq{(W{hQ!GI0SE=a9Gn zT#1{;?#y+aEPL~e*6=yMll7x<=}S4Nkmd{C%bZR=H+Tsytsq`@j=}>Na3tp7Cvns^ z=lXrI`vFO&(YTu8tc&-G^}>W6`|a3J+8yW$?dMX^Y;WQz`|Y)UYKeUY4^eBhf{Cs@ zC4Je4;SH0_u1f1TV}mAEa6|+=lKB;1s$c%lhw&c(xPkb5kt;HsHk;P0Pqt=BFxirG z)RNGsf$-$3I{+RN*bA9Y_u_p$8E|9{ecUhC(le6i6b~%E>_bhCk&h(y|8(WU@&Cnh zsP&2r@a+j+7MY`nZ3=LfaRIc<2>;7pbkJIzb5Z!cJwp=pIdW$r6hY{t=#8oQ>tkn8 zh+)9laAJLEj<0K@nbM39gwX;eD2cTW7j$hbg}OmYAN{=_f3GZdYvLE~da(GT#4g`z zmv=xtd+O`<)b|NqTfPh5I9-v+8h&)%=?6Dv28VGKeGc=ZH{oXp0h3H_2{&5Wlquq< zb^eBfO*K@L89X@>dYvtR`q9Wq&E949HNFTikFuL(ZyVBtcPi=jl3lzpVu(>Zb`f4hg`hK{vuznDkkISarI#vZMkpuyz1>hbW8(6X{_zn6wGdR*<96ZhL z9$micw@v%b_HMIk0x@M=k;mG__pOQyBUpu%yG;=KSS#g2p(^7}-) z|NGG$pB!xRTjgC=`C1P#m6;^1ekE^iCBrnF3eM{jw*e!@|6J#BRSQ6%~eG7Th% z{Rv3G9Oro8{;@KEx$%!A?@`8$K$oC|zHm`BXvei;ZEs3S*d|B9w#7AhHTWCSwpw-N z0vt*|IG(Pk9m5L%;rjRmN-y68J!{_YvM1m^&=LPs@G$N8kj+ViNY*$hQri`bO z;NTrE)lWxp_3e*v1XLj%OTvpXzp`p;=t_d5Wa;APsgZG+_RQB^{r+8!LbKJ5a*vk3 zPov1FiIx+Zl4XUT6_^3PI9fcoZ`91eUreKYWajJ1PDHs~NYR*=PsgTxj6+^xhYLK` zb0sXusDU9Sz0aDc?wiA6i^12~PrW%VGA@IlBGC_(-c+}lFV@Nrc)@F6 z>K9Nnw6i!SyDhJkNgE2rZO&3qw(pXzp{x2y@RiKJ8jGXx7x{oVc=Wz zN#cJx`a*5ikucgv+h#SywH!t6(L!>Rkk1C9Gvo_i5|Gc})6d+E4<#S|&aOH9K0%M- zyMZNSEJcHK^h10xY4jN2J@HliK6ZZ?L~gX-xWNRHobv3Qvu4d=iGv=?vNy5CS4xlZ zl4Eb`N-%@SZaOro>2Qj@Bmbpf_A|;%Q0o>ir`(PxJ^yWc2lnoSyvU8R^d@z}0fF_) zZf>1mv@RTwW&A4aee4`kF1C`jE3(@YGPJwBKHTA7zC}h)cvHE3qYte=oMurhn`an3-quFu|kM9sV=J^EwB(ynGcrOn-I4YH+XZsH6B$@Zy{=8lKn23}8B zsmz)E%9#5BHCQCuH6N9El5+J^(ehZbdh zzx0y(J^Cy0pABY2uvY5qfp;s@-MH?nk>W^>*Dix;S!7;&BNC8j7DkfmXIAaqEI(+~ zq0oMF`3IgFnIw;apSygLTt>BOZzA6;R&tkFwIekY;Y%I8-`fazIKIg2Bz*WJYlSY1 zkWq?99NF2W9AocBZ< z3m+OH_fl(R7w^{UTYTZB?}Xp;4{5I-s(M0?+X;NH(=V;!9B%Dl*gtZgiGUQj4=)*= z_pw%9N$NwWoEF$(v?QMMDs_#~3_0MYTi0zn$7q~x?-`BJ#VLcB&PcDh(-|qdZTU<; ze+7^i#CL0rifl#ap}-t<$Q3o)LLXW$9t@cJq~ZXbo!{L>1+w(4x;Ba?mny84e^lEX zc}ntGE^~l>3}|L<(nXwHORuqN7gEBZpF7TdPDrQty`(O`#z&ud;*;PN=1bP2U0(0O zx}JLuK64VuMIS>_Z~nGzpU4dq57`NBvg`p>V54(|BSOeH?C%8zoXO!~=HEPv}C zzZqCLb_ec{e&zLwlIeKH>r2Knx-GYei_~({^S1%gOi99fohivz@xdTsSONyIyN7gI zwOc`xxkvqNfLkYy5t8;+??Hw+F#RVHK3vU% zt>Ka^PPL~mJndjPqi!ZS#W=(=vkZMO*wUj@ye+905=Uxb8b=iuWJjmtjs0avX0i4Bis%E(pGYRks&=yCJbRS;KZ-;rLz)Mr#2s zjuo+|^-<$`ySF+W7Lo}3*14~G;Q369r6G)5iJv@VxF3vi;(MTqj<7*JpVS*#=Vg+p z*jO<)0o&vu!4Ip%CMw}oaxfgn6)S6Z8*S=fiMXgSb{34B_zCat^G?j>VPfosQeqqt zgzd5rXjVDkzoi$jC^hCn2JS%ghu)Ty!uaXbZqSO~FGFHVMq>Ng6!f=PdB8Aia{`N*_bI_MiDVEp|Kg;kJ@#y^v`v417e0 zN4a2lY~Fc{ARS&7Ga3~}bGrDQ$#3*Nug!GQs%-#5xceOLgXf1^Q_=P$dOVZpX7b%s z%k_!gsAJ7!)ou<3qBnI|FErI0`CgPe5g!TA90jE>k3 zKpp({)NT&7+Mo49q|S7YqrYGxu1j^I>X~7O^QZQa*i>SJ#6>lPGZPg}usk4z_oc}A zUojY+7%2=piCm804BfJhcC!dsSh81oj*jfAtd_(^yLMOW|4nR(;_CpLT7ix5# zk3M5nS@_HDfp&S+n@7uwZC~!%MWn}0MZwxn88pmoRIa`uo^z(J7eTA`51^(rFSqkn z63V~!N-9!9idFk(_h+ijT<1t10*cS=w8h+>DBW)-s5sVhv3gopGWj9JI@wGw9E7t> zXvaQ!*Bq*{YCoVek`#A4Abvk>Kc+(%hCFdX+$8lSm5l-YUpn;N+gv6=BES(MNR;-DLsso+ zj+Eu0FN+QLV{M)*joXA0YzRYFpXndZ2fI9tlj^d3GiQI5l{4W%A<^MSRE=RVGukUHK zXCB2^mDI&^fP;YH~|WH)w?>n`A0>lgmlw z{;chxV)KEq(EU*0+Asd`Rtcbf8*fsE_9JTJ;*A9bhi~>9H(wd*Y7*t07q^8!f&zhHeCMS(|1~ zSAG*BX&_jS4KkC;(W$Qf{!ojw&iKQ~Y3>NbH6Z>VU1!?bTV=eII#jz$$lkj1NXP2S zG1(a|`H&~1V$ZQeNQ3kE*tdq*8%FtD8?FA#nY5L%7R;?Ioc% zH-)zpQ!l{fLghh-o;blLsdPU5iceewg?iJ<1o*h52{)!EN0-qO5c!={)~ED-?Hzlz zu|A3n7hAQOzdeJMahwbnsgCbNmg!3CJTyyztB1m^>9(Vh;*U{B6s@=pB8n`fJdzzq z&&Bssi@G=*E401wH|YMzJ{|DGEm>XQEc?9uq#~nl1F4XriqiL_sfq;{iRjNhSL}N;@ggl{@Mh)^?94b~(>PQr35$zidj z$1>{Rx9}f)+j%+kD}ZTp>}@znWfwKIo%1Nr^S3RJe+xR)ZQeEfG2VBjJ;C3dfZ8>D zEx+DrTAE3zX--O`Nx?zy`x1%oKaB_Cq}=IvAWq*|nVZY=`|{Pb9$1Zq%S^4QX>V34 z)nb0+o(2ggiiE;pVIJ7z?)JS>`T-tKpyRqYu9yh1@YcxnDmR&>EhP*MDujy@|9c z)IKOz#Qt%bX^fP83B4}KXW>@!d+eW}-%RJMtN0y$FWn>!Un|BLO^ROSJlX^zbawHu zGD5%9J?Xq@4p~J;Io;wZ6C8^FJ3a7EmT=k|$z9Oa)Rwl3eiLgf=jH~Fr<8->R&7A# zLAt#W2o-`r?lOJp7)sf+_bIch_?0pAkUE@>C`ndj;ePskdk4-!jt}beT{F~$E+0%2 z9{@{kRnu^$5bL~y17Cd#o_G&P&fA;XF4ziq$8FJiU_Ml%KoyhxKog~^*yw=v?P;%* zDRGfIULRXZv_7WP&s1u2`<7js!EM);_AUP%O5=KV#uxk#JoNBPOyE$6w<6AzK&_C= zx%}#f!x`WOR`N?OV8HKPe?$JpXh3)5o<*(PmQ;^j$h%YqeKExSX>0Otv?q(sLka=U zCE1IOUrlSdAody&@$YI3b?g(WG%{ZH4X2%`O=+)u#NFE(A4kSkCv>s^q#cD@#&#hJ z)~_4m-(Z+&09_+Oaa}OU`W`dAN6Cqqwz3}m0;B6yyc%(M8I~2pift>!&hb*fv^SoJ zfk-{4Lri64SN(b)bb|C9##R4;sbG`HG@g$`_1E$96ANlJ?@8)~B1Q(L=jL8IEz5dP z&h-$cV7G6#lmdMC;Hwg~T7#wWKD26|Qwp{RK$OX{aJnTTJoWNnLZaC8G#^0^6+Ud@}UumKl9-xR>6*8~#1owRE$Hx2l$&LbU}f zX%A(QqQLs8*1+K?-90jffk2wbiyGu#VeC`}9(>REi5+zAkNcc9I>t{LVSldr#p z0t&*V>>5u5beXL4T!7;KP(Z7&;(W2I;a-+z<<(@j#y+B*j42e%j@@>;p;@-Q5zwXi zomSmP^r(wS?C0bJxk>C!lbHbmV8DnS7Gk6%8wT}DK^)Dx6Iudk(hH+_MKUakXGg|o zTF(bpWQGrpf{KM;Ifg));SWZ657?b7+;A)5(o=*Hj#shE&H}cusp8^xH9U)&wC`pj zd-(O0-@H$Rb?U0YmfrN=0GUCjyl63&3Owg>_pCEX&Vp`F5XZYNN#OSMflV_zYG@b?K z=`gwq8l@#CW>=3oYkF1je`51FfvtccsGM_{33oe&}uV0EJVb-pTTw~iI0e6 z9{aPykkbh^ca%w3U6n>>2cIgnl}v^4H}xY+>@_Cl9bt$##%>z+)7(GtA(V{{dWatf zz21=SPc4?9eMzs#XZbNYW!S?`#!Mv7WK6{g;XyvAijwo0 zQttuTgE+m`y%F{a!T zA6DdR8WAgVtJv5oaF$;js|gV*NN9gc15)i~;j!Lp%py3e3RCK{|5YU~)lcbpXCJkg zqhI%~4Xt(takZPRqmJ=uG$_Ij)=Fqk&puvREs%7(_pe@fs#=Q0xqV8KaA>KJR<$VvPkET-*lqYH|)^sm{15F>Xn+CcLdVHls} zu%gk2e!x0|eXq(^tT<6$y|F99Sh&fm#8hriICN~^qLskuiD9!E+O|MKLp^7{)2p9l zb*qb{WA@XL%4aTB|h`PXCU z#&Oz=t*~l;1LVY+PLaeZ&Xa*fCqvEuV4jl1Nr5d+Fm-G7l|9rOP`&cxDWP5#kw8G$ z`Kd06$Ub_9R_oHYLMe+S;Nl36_7v1hDWR&kQqBI9bT!mM4DI7pY-}=`l!)iYYYwZd z8)_HC3Z!af5%enG!`PtIUtkmXQU;L3S(pAA<77D65(iIPyc&R6gb`UZ(=?4RLx+7> zDx%97J(8>*-wuHtM10~T+}#vx})#Nji3n&$iKFTH&Cx2;&5SH=M3cmg~_rr z1Hw+sV1${FX=mg{v+6Y5MG0HQCN<>n#cT!?+UvA}h0^%RG@>P5fk3o1%8K7l0cS3* zxz7d}5b%yTM`RM#;-L6KKG=uV&4el6B-vKqvY-thr5YOBZCpS@iT;F55?d@}M(Ex~ z&lT@bhqQ0KT(_8nFea|t#BXLB!!;G8w7gl&dmHb^Pi*63@NEe%$wGXh;7EV}P*sA3 z%ZO4j$)?1IKs#}KvW?<<(>_ZLpRDEgx*^UOXF!-eI?m%eO!71!V8HnIXj(6BSsFIm`w=s^LgaW-bz;FOpI?BQir@(% zZSyC|yk_`G%H(O#&#G%TrXy#VFHvVfpS9{ss|+ZTrFf5OGxx6zw2(GwJwqe1nQv4s z8=4%Gm&uSTh<^@GhB6GBbAD6~L`lTVsV$RdB|R(dPd3eZ@LKYL1flZ5y`W1nGXw65 zf7?kn9RzxG;#TmAzr~-T#&`n`4E+}^UCl+rx_Dfe#d-B?->y@;S~Jn_`#8> zpW~_gx7ZX+qE^rOWL^uxJ<0epz4zPb*wa~NjM9e0s?UL7tvMJO(=(!2XTPM6xJ}EA ztrq*18tvRX=uZ6m`Cs8H4GUDbC25C&7Lj7BjEvEYRYN^F6__+zJ?2O!cEp z^|%5#)u*EMP3;#uwZE3A0j#3MP!(|6;`1R*bV850C)>o6QhX4coNA-b^qbMERU`h&T?F}x(lyP&#e$>*@s@AQ=hN6KY^_l#I;Iv0PN;Ppm7 zuaIVRm_aes#48z$6PmzCfx>B;EBYiOru+s|o@F<@vPmO&ky*!61S6dv;6tbaR3cN; zXW1$GDxk^uNz_vW+h!Iux=%8>=L^pNLNYNiH6@rM$TlTebi+xf)}#y^&Pw1_@{E81!A2jq;z$&tw( zT}YO~B?5cw$({vTkJHMyLNQW77O#0cg{vyeV6{f`>Garr&WQ3Ny*ejwq@j97YdOFr z3^2ao+M@J#9kT@w~A(2f1oei}XNP_dgOD=`!rt)Ns zW(6iAc9K)smOkM8a)rZLZ@8hT5pgJ%eR`oo2m&oc3SIi_T=$rv+73f{RpeA4vWxts zJas4Cg*KMMDl}|(L$M+Q_5Ek!A!Vai{NY2VE=AOc=%w3364_Ukr1d%H3nN+v}N;aw~Zgmg!AB*w(c>>(2~zau_nj zJ}tZ<3v8T*y7~~Lea_DK#4p1!-;Q_fi9Wl+7&dX;_}9ljGvJ%sA{9v1r8j0;51Ipn zWpGq5_qK3j7E@+sBJ3HNDPLhzM~b&K`u!|#8y%L%y)b1g&`YEWqStx5J|!`e4Wo@D zvpp*92kbmpGRPvr$nVSm_vfRmEh9L5> z6wd-b+gfK48lPt-&#Z8Zj~??U!DyS!i}o}eX^%cSw1jq>P0xIcRzs21 zKMGQE&{O#SDk=yf2|?GN&cUPDUGHi^k9r8WdhM4*+w(V_@%Csq>@1ut!yA3Q= z$LS=R&5^b*t6!$F0@$H2n)OiR654Qy+7P|+OInZ{nXeX%wBP>U#=jVmFmh*@HW?qT zfI&7g@+r6BhBs^@mTK|a5j3H;lF2VYnot4v-U6Q zq^i#n|CjM69g#;aws;4vQU%S%9?6cq@w8LHk>e}K>e*@-*fu2%?9I(Z+f8vNZF4^X z1fCP_HZw9Jo#4dyD+DJ}-F&0VJ0D0>B2B!J#?l5BXZ<87n5>SOkLmZjbTL64CnI{T zri@0ksBb~kw^0QQ5fn0ya_&In_HTEJQ*rP@JWE0&BO|vu)rc?zx^G zTfDE9#6!lh@453tHM5`PqOE|%UQrAUmK7PPcy}knpFRUEEUX~$8M&H;2*8xc;ka5% zi)G=XLzaCrlJj&&29($tygQN_9xJM(*glgMDo;Wk;l?^lTx>20wLjhQVbu3LYr48y zt*IjwD#XrW{)DJE2X9S6srK3Tr3asF9cM(F`<};O|G`#Ru> zro*Y;^~(?Yq1eLTMSabWD1TxV(F2~FrSs6H^@K9q8O#sg=Nq!D0I$|G+J(QZivoc+ z)i^uHd7K(N!-;qZJ@g~K5Ch#c8wWJCKjD)0WYK0ry#j==6eTb*QkrRh#dQ~G0Y$Pd zjZV|prvW0q0I-XTJSd?2X7Sgl?s#$$+h2NNPY@fL1Rp@^&gD{N=$X8+Ve~WB;zl61n8)- z;%KSH*t}>)eL!1iCDoR_#kH0jeS!50KZ{OKhQg?cY3q-cXGL=!3YevOjW*RmW`jl@ z=SF6KiTN@W%<>?AA<8s4V=+TUVzANgb}M5=#Ij>uv%W0a>1{fB2Yc<=r|J%)?U?(1 zD3=ojT{hipYoYFs$<`@OD$%sl$I^Jg!k$- zd`YytG)9onXTU3_v~FWBwx?w#buZ-q+~5O0yZnWLjwWT~O10|#2h?dgl45U#$*+%$ zZIoKZEZa>oAyq=BZaWeTM7~pZa8^SQONpf5#|*i;c$UNUv1tx}v{$xJ>{s$((xQWjA<6yj!x5R0TFS_Y-s{`(o__g zeeA!n1Y91Yy4+}ak3B&KO@)nScobB*J104dJp#-K79);C%{US*>`c52%XSbC1))uc z|1%<2WJbQ1ncv1(n%neVO1Oy|kk5!#o|%=9WtAP?=fjAKoEgXtcAn7~-sE-T_h5`C z4b&G!0>}O=fwl@kRB1Dt(B{~$=m|{_N5P&}{pI{+6KA|xusfes8L<{*EwF0MkLdKt-A&qRGIc=$OdO{&oY(Xu*CeR5s;g*W=75GH>a8IM6$w9_@o zvN6eWutk%l6k*aEz{dt1g+lmpVXKtIf@{Dz2a06F*V-Mh_Uhn~oW{C-O2cD)g;9P4S?ml9q43m=618idVrGzn5_^aJ})k>CTUnBW&`58YK@ zGF6~TN{kr?$BU4$Q&>i1PJXV-<*>bylez3pXT(KEn_Iu>O%wlT>N9?F874P#I8ZCl zkXD)*EeJ=Zei;pYX+6JQE@4gK?xD7|?6PMVJU#YX`As`MS^k=Qq$JZt#0qc`sZNV5 z>E7{4bmE8|?+$s(F2Q3d*Gx=Upx{0PGFA^FM>Nz;XrcHp2$~VRN?e=q{AeKOZ#1`j z^UK3zCB7r3_~V_I4_RN-7RXTofp^4Ai5(vf>4tmz)!^i&R%Pv%-gh2Fwon1P z7^SYNkbgz&4K@?RZ<+*~K4pIldjv1oo@K6E*tVub)^Zk(GPS!}z70Ek+-KHvTXyW@ zHm-`S=#Tx*o{Tea25*Lt6QjR8`xW$%efqj@sbvS?@=2PdIk%OX{slxAcGV|zaHZ)A z`;Gihcl^ta4>@E{%;L*FEJeE_`;6`3^(m?;GxVPVy?p;g%-*c$Cp8$iz3&Kg_|s7w zjT;ExUX+!1p3eSBQeR7a(a_QFGJzaYySYA{$>e%|U#-(ZdJlDe*595stf9$FF2!=; z^}NUpnbFxCSH=r5u+@tGgr-TT!h1(W7ynAK<+C$Tcs~~@S+l9 zZrYIuyk)KU8;N*Y>Yy8k3Z*|IDK-cFW%TgVm4ZwoE5zq$wf8M}yHC5xO>$wUDAKjn z+by8JItc3lnA(h@8J`(^I=sOtZ^sfVT|&C{&=iUi*&!3f9?khl;O*+X$iyr~*OiT?ZUxs2TfM44xSaKW5ZqbMS)5w=`Q5gqjbX>D!w` zjw95q7FL7baONL99nSovHBG67^@=aApyDRpj>`U0Wr>IGmKEB;?VJNL`Tf25`>~Fh zU-q1Ho4LQH=bSG=Ligg7x$i#rS>QfrxXInjOQxKF?Pob5iV+^5HVj&Yxh-Dj!$ ztZ|={+-I@-taP7+?sJ~|%y6HbF233Bd!GBOb)O~fbDI0CaG&+=Gw41SxzAklgk8)5 zN(9N*Y5nu$=40%QW54$cC2Z))+V-j$&>jV5;`Z^JhStw--@>p^DqY4uKmX)WpGjI7 zPlZd%gim_5CI&g1l?)3`yj|+^JtBbd^)MUjFRYzwMv+Odqjitc=ix(XoDa>4HpXyV zD|MikW}1ph(|KfSZo+g!Jo1!yga-D%nC8-d$o@0+sR7P-ubEQ`Brun*qHo8T0i7WL zWx(pXmKD(lq0<711=r$Qx3B9nxZB=(bJ2D!a|dDzr&-T;hr33Fv@YWdl;m0uyf5ka z#C|pZoikb)iJe2q-~3A2@NxLCf9U-#Wit1Iz)zN?;nH`|+3 zkI_d3xzG9q`cVE6#-nySwj*XAvVFPy=-^dLTvDhRL$JLM?AT`?+VO$it~^6JQ6L#z z#knL1pEtYy#r@e$_8arR$t=P*{~SvBs18eEKM)U4rkxrN?bttL>&^B7g8=>#Z-(CD zg21NH=FZ zpZ%77Ub=l`4k z38wygf;yzlOZnIQVoy)w<&NWq>cZ>TIB}rFJz4;nhc?w!AOGa44SoOr|NH+g1*+!! z;LbaKctO#{7tW}v^4xm$f?KbjdFPz!;LQ2ss&22Yo>~3hG_B(9;LN$fIk#8&?_Mx- z{;aCI7y9SS_0OAo=dJhNUR8DX9eMelIdkv0dv3L0&JFtSm_7gQyKWE8xnoXn4#4Nl zzkAl4s+s=tJm+2F_sr%W|5e_7xBsr&=icN0!9Bs5)&5y`&-YhcJHcN)=gzse2Sf8` zD$mrpKbm{@!nyug^JmVS@1J-3{M+xE3DU{RXWSmV{Z{kM;~!nff1a!EoO}2DIdktM z$Aa6d=FIR1=iD{Z&(Dy7HxxpEwVy^*&$)Z9zv#kmUwD!K0{<2B=Fh3}U-Yd4|3!sG z7Y`kG_q==N&$)AU(4TilzP~6C7;}Nr{S&HY&YkPO{`R>uD1Sl4%-Qp+@1A>n?r&c} zk?;7gm^)+s%-gH|Wpk?ToH_saY~ND0Z~G^N?(vt;pL2(Q${n+BucGY*{t5H%4$boy zUsT|~YVI8u4)qu`MUN}y&8wPo2ZROpAB5&q1^o->1ZVr5R$bsBE$E*gnmbn%FkdL+ ze*N#-Jk%4KJ9E*znRf(d&hXz0MF0Gmbi-W#9e2-|+5g+jxikEC&+3Dh$tO{fPhj$M+Ir2qlO}avApk(KRqIx^jP@BA^&30ZIYVw$L5~NC6436m~B3 z#VkAGMK|X94O%+IWhdNAlH@=S&2S(`R#&23!uMz5vZkPVvXN67L7Fu)#paG66ZK@{ zyCNMEa9~5jk?qP#O|nUnY{{t^D0-$fLlnx>`(wj8UPSGw2*CnbzE_L@UM|#uOnPVSIG}8YA=SEbI@0R1fg~lNXA&azP8%)DWzBT4TC+;hv(sFuPSg}SwG#RE z^(!=((CAUL%VKmTVc?-vhTAe75)i|vP7&P+=VrGt+TrU+;}(Ur4j4BDRDj0mFu**ooJa~aBb&_BGHkafDXSgf`0rJC7yJXzaQ_tf{{_GQG|vBuKbn3WEtlVl{QEZS zE(0Ym$y@PD?Eh)HkqA!_)+0PB3KS|snA8(6fuQXeO;1N-qd&2JlmYgI%|;SCX7DsR zWhHj%-VH%*!i+=tpjY{A6Vj(|Kln+prl(suw!(LA$O0vOl{-JaY+2w;FsFHW1*xG_ zh?^3Uvbnk5Mp%@o{4k;hOwB%%3(L2N0rT~Mg1O_9uqaY9z;RI?4Z{X3mm?F?E8*(H zo()3nGv%>7aLgFx^fEzLsK1TEE9T( zEh&}GUSj$yWGopZ2n>V+Z6o49`CJP%Lm3n1CCj%B6YaLd!K}T#`BEXI54*~>uFIN$ zNg=^T!)4kSw}o0R`{``WARTN8q?B6Hm)_n_49XxN+r#5?Pv8N{gyum*;+)s7S6Xf+&^Lbu>@u^z&Q{|P$14((r$~R=f!*x zJMP`w?zSE=ajKqg^?KCnSnsucCiG3{r|w^2z_9^~20Gr;TAo{W#*eXfN~oB)D{)kk z(RRk?W&&r zZFa=a--o(}Rn95MQReQ>?LYkb@DJaAeZ<@mZ9driLB|h|d}tYYb)+lr@4QbxdVSRN zQT0Eb|8eut-;Qqg$(m18pRWH@J7(h;-Pny|HRINeQ;c6VzRiTMCp4KjZ(`j^(s*)_%R`O43mOr0^c^0W`8-JE8ferS657lmImnK5-nz|72< zB{QREZJpKP%P+q4|0?6FlV3&7UNyVkoKNQ5oYQyi_PMR*O`Z2-USh%C0{Q$|^PkVR zE!ew2w(yIEPZnAh?O4=&@r1=U7QefsaLJoXbC;f4YFsvF*|TMquZzBxe3SRhnQzSB z&i(f3xBZuITK?vW>=lPsNWYu(-PP|ptX#12*~)&a)~~9*I&JmOs~fEuvF7L+>DqB? z&#yHWPA|Ms*kRq=br04>uV1qM+4`OvmTw5y*mvWqjpa8D*tBL-h0Oyuui0E-%YZGb zwv^l2ck7C+e&5G^zwG-b-$(y2|A)Ijbog=RkJo-Q6-_QGDUxsdc-xU}O}7u-zH9rN zJ5qLR*im6;@109_-rpJd)3l$?|0Lg)x9i}p20st}dDG7ocK6)9VE4`4raj~L9NY8G zFV0`K{!(dg&%N{aUf-+TH+o<3zIywU_pjdnbbrSKQx2Ry(Cnb|;O2vY#nHtxi_aFf z{MGgA_rI1u6mw|Cp^`(vhld>AblC4m)R8GiP8^Z^X8&#FZ})#Q9UXmi@6j5^`W~Bi z?BcQ3$1{&_JpSx>#EEey4xXravfs&hCoi0AaVq1~+EWis8Bgb({^@k3-@E-j<@euy zf9sC{e-!+2{*UHo2Ax@Pru2-WWN68zk|!l0XYAJc4=8c=JO6{eKOV5=yyfxs~%v-4yC=ibzN2k%wBA9+9T{+9dq@5>&fJy`PK?1Op_dp*p5xc6bXN9ISlkJdiA{;2t5 z>*KE;A9?)xlTJ@Qda~uo-6w6HCO<8Bdg5t~zq|ZB`tPlO-}}4mv*c&=rmWaBJZGKzTVwxfSKEmupu(tNh0D&&qeKFr~up z6g}rUy}s{tW3}(9H42&$ z^m_HN)dOne)gW(t^hRLKaW#W#eOaq%?KQQ--aPzfa-Ao2roPp>?(VwD^~%>@TEA<9 z+YP>aJEGyOh6R$?MuCktHFmz!vdP6J3!5f2Yu5Z)^VPxcx9HHaW~=k9*0&zt#@bfj zu9oz+^pLDjK1-3OOjY$%x7R4NO?7qkH4LvAE11fMR4`W#4GOE%{+)1XggNrv4z`XX zI!%vS-T7db(ynhr>td|26W`s`{YsB|J!5-~>AkJbv%aSO9}d_)u#%;F{9Nnxgpi~u zw#&((_SvbA2lY?;A-#!XlJnt^2eE)%SWvJKr{0Dybhy&{n+wJ>8GQ| z)*D|qA$HQu$@%%J&reVNbh>=TxtY_xjGFB?cgwuo`MQNq7j0iMVOg(lnl8V;;+K{4 zSHHiu_d3mnw>CZB{O8s~KNJ|N7$fBwsqebWxiDxQC6#gQ#X_Z=@e`QUW* zGi}dCpC58@#-Bx3{<>E0Mz_*Yw>RItcVF?y^<*QIQ0|{FSKgF4#&8+C+JBfHw)n2+ z?UffEx6i4n`}h|sk3D;_QdFZYAGZGs?wX_h_ZY?xyfW*vJ5|R8$Z^|(ADJJ~=woaSTP-L~;o@F*JokZQK1M$XMG61e}^vX`>_{;snc^=_R$aN<#V zO(#h>7FTef#k&KG>8|<Q*5pwPa! zKh|Y{4TuMJ0X(xl%$i9>YI;f2EJEdEyzGVuygU_gF~_c)cyUm=(}Gn9#0-$&NSK6_ ziLbomcWzG*Xh2{}#Xw0+PL}4#NP#1yq%yfesZwjSIwEy{hP4lmi0ts91uIBacvx3X zG(p%Wx9TTk_nuCdnk@=6FR9$2X}15Dkopq}BGjYznn#bNG8GuHjQjA?f*T}%RPak; zxFriOspC!EIJq6#5E5cuj9_8H+N{B;P6^~vX>9$?1Yy2@Xuf>yEaGrXu$g5YiYVAB zI~sC1ZXr*F%!CS&nY5X%QnH)8(8ZU_Dk!N>X`ufRY9nG4Sn9Z%Yc+qU>ghD%h*V8_IB4nbI zAs>Z#ArS3g#b9+T33kWIR?sbwPMjc>#R8g>!0-(sp@JM*0a)pXWHa2-TX2iafz0rw zA-!Gc5|y^JJ7U`6whTvhirqH`DoL;=4o-on9~t39 zXX)8lE@V$ah1_YWs7^@XGBK9W$ksHc-P#UymH~+`R`-dyC@P_1-u~KwTyUBVJrjE* z+lC=wS0>$i;rz(duk=LYX~mLwWmGJ#Hvhz*^*{T{OiAdUVtr+{2=jxyz1kPrH6`Jn zWS{!`&ly9#!rv<^!U@SbMD4HgBXlWBjy!@<#7%nz>&*^~YxL|gh8E$w1G<$kuqDCm z!y?ehKmy!ytQIUTQ7_{9U>OnSEhw}nEG)Fg&M&l&Ehw~yip&C;`oE-KjAqk;W65@+ zcs2_aFtwwEoC(`4%!$dV^%9RLicSTnld`SZA0ICvp~Ski(B26kfD|~q1@hiag?3slalys=S8Oc1WpG>_ zu=-&kFwfEv&lrOYTbd-zk>&E*Q{kMmhM|x6#>B-XPFLuR-afMkja5QBJ1ULR05Q>{ zwA+zoV}9DDSlMP3WmAwFwp}cukJ>g=qVF9!q7uY~f()PT42V;3Zv(J?>>;H*$3O*d zW%T9y`wQ*cc+|x^=s=-8%DqqE7VTm?FFTDAdkNje1TDo-8)mmwh8zE693a9YvZI0+@@ak`rr-Lq>~ey<0c zMO0vI$IcOL4896D*{M6P_`puPSKJBM$IsyUSTgq9G1!t)9eNN7ZW|L@lG*8W_fg!x zUK&P_>w;!kqPm53jI{KM?A{|PCYod>urbP&$2UCXw#rQMAB1^%lAa3oO^>VNvQqpf zVP2l1xQ?(no0?^372Dt4GY9I?Y#yTj68~jn%#$xsyr5CH03DFEd z`BAPb@*FTtfzF9`3^&AOhk`_c4a1TK6mN#`c~45kHg+Z$B;*vD4{7|=nIQ@99?mnc zD5qF2f-zBygTe|%!qFhn9La?HtYe~DEFK4f0qn$Lh7?dhgP6v^Sk9Mqtmx zk&z6g3>PI6bUI_&4YbNVzF1w0l5*DxTc>a-qVie2B2!!zg?h_Mgz^h^^x2lv3%)${ z%kkIPho?*hIt0kN#pSRtvd;EVXa>dnsn`cPwP+JeG$UYIps9ka z4H>kux&3mtzaiOB-=HfmPMwB}g{eH5m?{UYG6Df0>B+tb!CfO>50#!!oxMQbmT8rX zeNYb=>YTiTTi1K!9!&nRji2;}^Sj)#w(_=G8mJ6y8`gE`RG3J&0SO-j6$Nb#=u#yS zTUjeN#6<@+_#1RJl#wz}P$eNZcL9Ni;iWw zwsTU|0b#JY^^_>1>)8z@{2n8+%vd0g){H%>M;x?6xFwmDQa(b-vX7Okdvp&UD`Dia zrFs^j^Ey*>!=z3N>&_m}D^UJ)uq}6(Ba@T=h!@SA0)j{bitTDMO(m?)IprT@oU4mO zD>gbg`2=JR1bg35zcA4OnQz3Fd|3GoFp#{Zf zUnngT%WyQ0XA^~*N7Z6&>^6DS_?Ye#I6{$P4^rXwq}jk1;%0ojV93UZWE>->gTt}V z1f#DF_*D#6td^Mz^TX@Cl;w#Rj$uYGs~*dg{fIa-7sdf!r)7*H6pEX9#Er>{L|a>I zNta2)EgNCVK-|ddVI4{-wmTv^93d7ZC`uxApfV`h$*o{%GZ@>8mS#Z>==e}P#PXE# z2Ewc|*k*HD_}DDWAJx5b2NdR4E^(o*nMuO81;6&BOQkeN3N#j3wviqizF{U zT+@ldb36hozIz?PQBqFXh!GE7=EJy9PH^KbC_)9Wo)RZ?QISv59oeSb2J62by;C$P zYRN(M3(-%7PVFl=dWBGl9yg_+^qGRvY6^}lzz!eyX$QH+TX_0KxwN z`cVB<1)hC)a6KBHYV05VL!VMSd3fl~^;kTO@z6METt%b^B%c(~hi=BxIA~m@ES^$A z|It76p>Z*5(I0A0^F`ysWb~Zog~ma((P{cZIGQF+kNTnM&@`AI#9darLJ~qB^zMF` zF(Id7I;YUiqLNK0?6Rhy+^f(91q<3bWyiy*t+a=ZucWW&yASu>kufm5183k}x}(4F z_Vkmt?QI87EZB1fk^g>f){!yhC}0%Nx(G{0+WlKg*yO=?EXt5k0k)H>*px|EFs8W> z+<0T1*c~sG>3fq!FDGAeDmZc^k4*>s^IkR_Rrj*uX?Qob;UElTTHnc5%(PhG*zpop(~N4OD%?%x*)DOb zK$Q{u3vNP7^Ao2KM34`N`UG9Kc~N_QJ};|2L~{!ljPYM(*RQW%p0n_<8lKsS$!a*G zNElDoE>wF}ydEH)KzhM}pW|PW-z*p1?4ZH^gW^47lDNK2Nib5Ss$y(WMVFhHuDAmL zkO*0rZmFjv9u@@W25iD0;8hW%tF;Ac-_IHr|<+U$CmExTMstdLvobyVfBeO_{%X+plMD`PXPHZ{Iy3 zbJXVx)@(m??smW%?Z3_htJ;$tl2~v5trl|J#A6p&LbD@maElN71`64 z{mJyj>wfy};=S^^Wm+F59^K_~nO{-fE$X>YJK7Zr0bE_MEu#sB+zw`p*3Z4IlsIH=BPsdG+yY^;#La z^dJ2Ggs;BcviH=rCspdVHg+A5He%xJ7Y0ir8_y2zV@7LdM z8xs9q#)p&Ve)q$HKW;p$*07y9#^MiY|B4qpIB| z?Qbw}&hKr~S6nxJ@crNZ?MH2|(f#v7jT07}lV`5EUB1JoyK49P;%KwvC70Ag*Wa() zdHgSR`+a$`<)Ck_>W6QB{Cf1{18=`K_m8$2-`xoL@P}ss;UDjKqsP?4?<6ifugF?^ zr$WauKfl>~#;KiMR)fF2W_W+glWH-a9c*Zsccz_V~4ed`VD#Y_W8ev$W#aPP>Db*)P|b+2^=+W6s0C(GfeFEK0gib6VUHWufbC zm5E*VwO*d~SN+)oP8+w5cfn#|jk$9Mjv(d(#s{m}cbPmVs&_PdN5Z_j=2kB}ceeCGF2*tSOVt!JxGdG}Y@ z>LIr(jf>jT;_K8aZ_Vm^LboaRQMpede`>necCpshArhCQhESdF+!D?IFXWjt zEy@YdgBxx5^F3a)9;36TaPExTbGO^FGeM)V;^F7-|MIy4#L3Um+z}$ocT5YL9@wH~ zq#0tferg6z&_NPPNH4|?3%mxu{7&N7CT{x?VitPtBMWOIw&9+|qQWU7&@ogXl{Fxq z-kCVO_m4I%^el>+E-a zUS}@>b^xn@(x2AZo5J1`DJvBv#{8m^Eo0qlMWJozG89FGA66&)Q4J|CH?}4vNqRa3 z4;;N_GHcYdAQz{8!caPTo`;Xg$0OI@sJ~b%4xqfmmyn}G$ch~4f+xPK5XnK55g^6u z>_LEpzF`(X*#LUviD?ng>B?=wdVyGLR*~5EjDQAxJ`wH+BW+{Wx_tNX zq8EQD5G79xVSD2J96!{Ud&l3_KS8+P-z3LbJyzyY2eFG2=30Iz&ZB_2|UyJ9A7jCmr?FL74}TL=}O_NSNwqM-Z)LqeLf4>4JtkaVxgvr{h$< zsKIoh;&Vb1C(W^__KZ|Pa_+q*6l{e`qkE_PsYOwfq(Vr3Ce zTX}Zdycqy=N6(7=WqDzn9bA#h%FD~kA`1Abx_F^K+reW&tT3JhNM;4lxp_UyCbZi67E=#8Bds4 z%KYM_q96{Wwra9D~z`HrKY}rXvbIdJn1`%^PKmyzsCp1mMRSd5VL+3!Y z{UP|pJu0DOgFT&Ok)b%-kx5*nElDD2_(vZn-B2b)BLQpyL%*Hm;X4oCzWcZYm)sFz zu^>b${i6P9IL?2xH5#-m8D~f`NH&X|stE;WWYdO^?H&~!*TE9mCpIQJGCIx@5!Ep& zt_P{mZ@s-!Uk;`GTfy5&L~h~uKE}Hj;XR-K4&~oM9RHnn5FbZzA1)sScsqem-dv7< z)3{4}d-Cg>R=y~|f?M7z{0n|M@qYaAp4n@?-3n9yihCjtcvHL8_@@5z@lFJS02=qY zI8T0@_?7_TG=*)4Z;xxPZrM1+RowjQ7WAZ8{V<)&>5MhK4g5=#mM zrruWY>GPC>8NV+>=*3Dee@c-qeVT-_7wOBrLqFr*V|Q@xK@ZtGZ**JakC5UTiR?Z4 z*bMfz?cYz|5=()9d%Q0X?WCda1=H%L;~jc&wsZmB`ET#sdK7Q|yhdJ$CU-|zI4L;( zNpI!QaI!l(C4Jks;lwm0{z9L#;h_`Pw{GPRmgYquUiNGq zcYMa0L$i&FrOSSM=YEvVwDfMo-_;h&=ggRRu;S+aO~W0_lY-0dro+4Jhfn{_jB@MN zZJgTS-XrssfEaBzc?0RAPQym^Gya%0^7oipIK5K#W3gD$5-pVQII(=QP>WK(51hH9wr%PPf7*$KMA> z#B>Xbif-X?rmBz7{)fOJR}$PKsw3P;3|7GGMjuWb&j*cx=3j@dF}+)mIOr6BK;xDS z%7eHk6v|pchMZ}mmoGrW5Yu09&*%st6wU`YTu|47hAHIzI9Guc4VY;NpA&78;JB_a zJ$fMRSO`z4_HEg|VtHTa;keT6IZz+hzZn4+Fcat)9w?F(lE)@ULhkxnhzw^bv^XC6To`CW(|J^6|&VqMo z*s*T~5I?-BZWu*yPyo67MgUp%W&m;GboMGMPEXhIBPBRt7>e)Gc;G!?haZvd^douT zrku?Yup!QCuZ90L@b{A+iHBRL1Uy|ctVWK*e!m})AZ#(taOcB*72ZKZ5Dr{&>|oeq zb1EP2d@O|v(y^k!frTKLS7Aw943xq>6z|w%n2~15T0c?*#3#ZZ?D8FO1B#(&Q3Ch8 z*09I-DjF{!?S%ZoAHh1GAit%E%LzZl@53Js_vQil&>|>Jg&BT=urCx3tJtexv|x zf!j4ni3R@AZW7eB6ObI3B`$Y1Dv zeBVPj#4UkY@)g3&L_UFd{7`iMLc|Tb0-ywC4@F!B4bT>-k5Hh5mXqdTKH^${JRu$@ zzVlGt0wDAx-0&`;<|QyMMtKk>9(|&y5dPp^0F)rkQnW+-0OaQ`-0vVScuVk>Zbu$a z9|gM+{s)BFim(WiPsbkY3eaXVF}BwLJAgC5Rlu)q0I3eV1B3v*fOKF2umIQu90INa zf%O8&8$c@{92fv30}kK=U^4I(unbrS{0tlcE&@-1YV`w%1keKS0!hGVU=FYn*b7_& z9s*Sw1dz9Y)_@M^3M2wf;1ggLunhPS_zk!K+yg4&hj{A%O#wMz24aCEU?flgYy^G< zt^k1z14u2PG0+Y$0x`gQz+fN;7!S+<76Ge)ZNRUPd1O%gzw1MPvnKngGtm;y=eex33LXMfKk94U^8$MxDGr6sx}KC4S^7#8!!ME3VZ=90#*Y%fkVJ0;4x64 zc>t*iv;)jQ9AF1V12cdnz*?XP*bn>;+yKf22ara99B2>p1zf;XU@5Q-H~^diE(1@1 z$}LcLKoh_W!~*XDPT(V8IcyFfte0P;4_8qfn#0M#1zC+M@J94SvKK(D+KE*yD{ zR3TMyKX*0!>PK~gD|v8RP%ToMyh-XnYFC%kBlSrG@-`-9328(clXplH(v&nK%^?qN zfgihVMOu?KkUO`7=ut-GL_w59Mbtz?v_wbr#DJTJOe6#%=TH(x+LLe+K_W>9(vfr` zQKU2JLb{S}B$~wFexi3tchZBz;j~gO(wp=leMvvkp9~-a$$P{?;)#_ckVHthZ6ukb zU>Zv$gUDb=q|+gpb`U2S0vR}t#DEDHipe#H;G$siJ{bYYWn zZDc#yL3Wa#$S&N#w43Z9zmUCTAK6b1Km=b*ekF&)K9Nk_sFI8$k%ePBMV1#rbJm{NI5U5@ z4HuAIqUpkw+Uz7TJppQQrN8JzcW^A6_9S=jCcNQ9Tymle*VK4<_gD*;s<6D`uqS^* z0Q5U(GF%|enjIm1rL{#a_RqGx%7{m7&xfE|5d4MVG#^RWBF}W>GG!-m1cJS9P6T^# z%q%CKN~O1vGb{SRPS%P{wqz^BsLX;&<=H_rnh$EA+w*Q0rY|eFxc7kF&h(m2FN1|% zODg!MuG9i*D!4V%+uFwp+N|t2zdI<^M@Cn|IWmZ!b39?0J>5riBzim0EpiJ}k#)!6 z(HrL5+`{yc%X0S#$lto|Nj4kzjAppd&oMwm1B2FABJTz@FkdIu8WyK3(;X3~l;NFE zc78+16gBwN7gJIe+_}@rbdb8^^jOhx>$axa2_6I0*0S)26ok0g_NIk9%;2^|DHU9= zriEjwZ}jk@ca~Ef+`+9EY{g}TCn&n%W?3O_?v^UAyhB6YtA02QY`!OQn%IJYYGeyB z(S2e|5*9CR3r-Qyt4px!qAgasa}333s*~pNPH&R-a`LHj?y6}EB=@L-M7wvuEM^Za zGf^X8lUBF~$*Vx3)48lRvOR@Bhhe+M?#N-`ab<_>h2qhzbhkHZ@X0Q-5{0D)5!_+v zJ-}`Q=s5SI27(P!V|N>%_2Kr*j#CIO+2{!tncD5h%nF&0+0$__eCZD+2V+EPu_B0nl~>OPu{qLm>3+w z8BJDvj#l_yfI;;SU*XK3f1%Y>c6g>!DT+XJDTUZpn96v9MRm04Jnxe_HyOfS6f2HO zpzU#(N5REMKY2R9-)_h3xd}z|i5b~5Me@@PWl)$G?gtJm=_rY~`F0E(g6CWOfR~&8< z!~BV_$KV3fu_7GKr#9?jr7!L%IioPU zcs#HLhDBzPTajS#SY(bL3-C9H=a&vRk;O5boLD0vwFcM792MCe#eMxM#;j|YUD882I zjtq_z&^XID@8|Z<6F^+SBu^H^vMCH^vMYiQ?SimtY3d`@r1M@>;>Z zRUzh?7(EgtE!FdjGgJODJ4>8pj;?vQ3{jLGCl5yX%9Fk?sgOJ9WE^rxrZKSghCg@mH$5fD{3HC zN@dI3(?=6P#>%iqBC-qA29Q$N^#O#(2)lf_$1K>>cM`ze zfXTpIU^8$4xCGn>swe|UGav%!3d92$z<6LbupFSzcD##$65uZ2uR>U$4j=)70XYx? zbOK_5K0rJ$2yg)(0%L)EU?xxiECW^nn}MCc0pK)n2`B{~1A*!Q@;XolXacka^gsj< z4bZ0#-bp|jkOPbbW&+EALSQFw1h@du=ihq!@73E8+$D`0cWvSHs4OJiJ@~T$H%TPr z-h8b|UBAejR97sw4kSDMI@(;}oV-x5`{_lys3fvSWE*FvoC_>TfIq@_#ZQDqvIEMb z7BzQsBxR@BI?-Q}vV{>6N$qIl{BZ_C-lsM_a&eqDJr45nu&fSPwbL&$gSy0}CJqj# zza2=(HUB6qkhx3de2Y>cASx@OeRz+q$V+?h7Lm|YXchp|&=)F$v<~R%uqNRS`b?bV z>kWz}Tk*_OQ8n3Rgl!;`iy; z4aLYe^O>6+J?CfFsi zSktpouWsvB=WL!UyNV*4Nn*gW1d(bz+^rG(^CwVV0na#4uZD0!eeFpSM?13ribmN7P zF@cmlO2h5y)P5pN><0tLq(EMvLZ$_RkE1LKna;kP&-9HmD2!j1etU>WriSXxH zVOK@?#@SX%|EdaR+TrCE>}B$PyF-T@In&TvHt1Pc_%#aOd|0z!=EH^yWB>NSQKqs=(dXg2jUIZS&@P)Nc&PRPen zskV=9qwZJTS=|)<9{nvtePbKrN5+Mw6{d}*U8bX^OQ!qy-LKjq%|g^6EzAZp0!az< zgb3*>y(g_8YbsO9y2z4bF4tGs`seh)`V&P(mvLX(XG%O)z#Lw)`#ey>Se|zCTmD`$jFdMAzy{G zGMmgDsR9&qqX;RdsHGUI*siFej8qmW$EaqgzESN{-BndohiQs6rJ63T05Xmj0yvPyIH-al=hRd1C{k(%8kA zVBBUrZoFwMZ)#vtn!1=0Ou43Yw7$UYHNk7T;(JA*b{g{5M?Xh@)%e&r!L;5~#T-oi z-W zHJ3EEG~Z|~x)j}Kx*571x&yiu`gQuB^z{s_4dqN#O)68UDb?gMEioaH0$v?%Z|#f%AUz;$eYRa@@RR2d?@MEMXdY!(LzK7mrcz`~VY|b&yHg7fGpmkY7peIL2W3*kmbdj`3 zx(~IsP*zReTRvDmR(?bNmZGyFS@EOdn4-KgNcpz1wK74OscfOLs~4)LX-{acXsH5z z9mG*d@s{GWvL1SFId!4-k(mTRhZy$3+IHGpT9*<(@X~~6X&$A1(Emf-n)-y~gp3WD zN$o=YpzBA-8hJIvAw><U0sB3qu$Th&KPE@Y_4lwVm@jnv3}6i!-`gVURp~Q zf$=m-_Bm?zsVq#MEI%fXQ&dtaln&)4<#}agbrbam>LS!!H_bH7HBF9onYO;JkItpL zVz_Sz!1!%w8f-djiZhQk&oURHFZ)roby8W{P^v_Iyd&!@3zd(Q-L|?_w)X>#XVz_STg7I+_J-4Q5s%e?& zrYSI_Nyx&GzUDO6&;6j6NXQK7Ptudp8`71sBeMHQDHApRM1EFrPI(2ipt-7t>YOTH zU7)V48K;?r`bg5(HrS1y8M90uo6ei+hLAiip0SG06|)sf6ora@s%+KQs?+N8YJbfe z$lDf8bwhhYZ^Ja?VW+9Y^w?B8L>|&LB*vU*9%=pxzY zYbn<$jwxSLwL%~HRQ*8RLN{DDMpvS{pnt3nGz6NOn-+$w4mlD+RzV*e;if4RGLvkfY`sh;?<;?*+M`L;=4vbHn&|rJD(Rc(`|0h*<;D`@ zW#b*=ccurXAtAFuo`m$l2%g2p1lKp$8zvbynTk!vLv&_R%9XK|tfF#@a)_#{=5y5S zUQHEkYpqe+Tbrp}tL?1oVrXXUVoEoCV47rVjUI(OK@&CyHUsk*59t0T0twBLbt6>CehZ|X)ErW%5cy^UJa7V~!V9`j!qL;kGH+ogM?!( z73A&ZJ>`4k=j1tx30Tz=i9hM;N62m2W0}9avb=`8uDr3lrCbgwLw&w4pD6!Xen$RC z{;6WBVvS;>V!uMAG${uv^Of_J=TPI-RgtRcsuiln>M(Ur^#FB_dc1nBdcAs^`V`vX zb@ZV+nsyqarn4qSGe9#$^Py(6W{PG5W{{(ro0@x?O4=Z8Q`ACVty4Q*J59SzdqjIr z8;P2B>PG9P=oac$>ULqqx~O}utD$eK*Xw)f2kCS5AL+;GXX-cWi}W}2clFQo6%17j z^$Ze2ut8=p7{Uyl4gC!x45JKV4bu%v4f_m-3{MPFV~8=_7-j5b9AF%4Txk5-xYBsU zc+&XD_}o~{q&9Uh#hCh;Y#7nmrjZzRvrGd+hG1^|BxGX9m5@gvRn0ZbYIC^xU2`8$ z!CbWWB=a=$VbJWGw5_E6&+n7TIo5dpKJnni&?UzvemLv z@*1FrOE8ySQ`gj_XtJS%TthoUTSMPUpJ13}Xo>u#7&}s$7wgaFv+?pT<;@kfl^?0* z=o{jfLCxkYjJvbuKh3v5bNm^-4v@x4x5#dS4n)hd163N>3z8tROti7r;5YMH&kobjMP>=Ts;mv!yL`mnpK)*`tMN32lU7E zf9db({S7rx$L$PSP^fne{S5J_;VFi%3=0h388#b!G8{IXHrzA#8><^z89N#KW0uY^ zeq~&WTHa{JN!r<%o!4vkXpd{pX)kI0b(M8Bbai!&buD#ronF^o*ICycy(K|6NS6spF-kXH z_qpy%-2&Y=x;47Zy6w7Obcb{&b?0hob^iLw`Z)b!{rBL&uIumXGfk6Ci%cZn zpUpKDap$*^5|sjfIt`MC@~2Q04^&iCR8a&eYAWg|>ML?IBQ$yF#bY%SHTjqoW@=_@ z3N(u}%QVYTV}+WHnys25%}&j3%|7(nUm^gEBM&|l=nbYMO775 zkgBGtj;g*&Twhw1Q5C9+P<2vuRmG~}RDDzfRPm}Lm0gvla;jY5>_({aRnt^6RkKwE mDsc;-P@w^=e^rszk=CdEE0!|{N-IjMNQ0=&zt8`04g4QD@d^|G literal 0 HcmV?d00001 diff --git a/src/SDL2/VisualC/external/lib/x86/libtiff-5.dll b/src/SDL2/VisualC/external/lib/x86/libtiff-5.dll new file mode 100755 index 0000000000000000000000000000000000000000..013fcdcfb3bc045e98e56d5002c2d4eff62dc7f8 GIT binary patch literal 436224 zcmeFadwf*Y)i*v#1{h%AM2#3VO01(sjha;SNhI1pLWqir5-tiVD#qASMVJ9<5ff%6 z;dnY2t0K1gcx_8tTWD2+Rxt@k2%sW($%p||)N>p!Ae38x{J!6{&zTE^zVG|I@1H;X zm~+nFYp=ET+H0@9_S%=Z=B7qhhRfx0G$3>{kC7`-f`PK_uT8xz5UMI>4AH4@4hFu{JJr@zr1(Kofi%m z(9dV19zDY48kN@9wPpYF*E`g2eihAs0_qE;;?SM&8pE z-)Tr;s`}SQJ_elCN9u(FsvHZjJpRd}wzuomQ}FR@Z`XzalHBv34ZU3l&+IvisqW_9 zuIwJNYo71z+Cj#S@$W+aowNPO+fB~N5bK(#gp``>8a?^KDYyA=!`BC=;}7eei)Zgt zz*5)b<_o7Q!1WhFD5c0R!1L^*;7TvNeZ~x6a8+vfGYzus;a@HB-Kp@2j36sl4gklc z!k4-VN-w-y!HEnZOV>caO+N~*`NFarsz@rIf0iO2?74_H=^yYlU+AAI{N*ye*@m0f z1KjjGr`~&qOSKK!$mIik=qR}1MDzduJGKPI1i#I0bNgxmVeUAP;nLkceWh9PaE2?q z`Gx!kf2?^S4}bgv+Gr$P!ByFX%@bGRv7EX+ab@FJ{mXH{k!g(ehBpRgKj)hEV@TF3Li!PHo0#DBI6v`nDt-W2@S-B#}N5G$T;qC;K*h?)D03|H`5Z@4+| z{&Pc+5Zsrpg}zV#gYhu01Eaz~k1x7lZ3!`Q=VgYG%g`sV}d)DRotP4 zP6c|0@<&OO^+`UrLv>!9>N|y-ZMtb%XdsHp7ityS0@R5tG9BI==(D5YH1hr2(wkU! z|0%}UOjd~+u2=ay##oP@OS1vjVx(}b|!q! z1e9^BGA=yKW@M;>6oC~5h`uNC#yR+KL0`t}?~T(}kI|t5`QeTFiBqrGQ4<(tYmWaO z^KK}gKF8-FS{7l|9{;_lgx(tL%FsgZA~n2O3$4bptryFK_3p@>yY&qdZ@Km6mFC$% z5h?2q?n|3>F;TIdiRRiv-QA*DTKH|0jm&fvZj8Md>`K$ZUFzE$`ddZaDRQc!jHYM} z%oE68f!2}y{rh){za!ZGzUSn&gWcVQ8>tVdP57raK8NCKi9&XgK4QE1D9RXPw+r_& zNNeRAq&br7H&+#fs)o-2R$=#)quC|CvN%5LH8zmVxhO3p<+GV+wH`t)1ZB5h@Y@`t z%I9nAwf#P&Qs{Zm_))$*quiHko(ACHsvPvl$SY?(VIXqQ54ul$3Yo!gJ$fs;KwqdM zaddBN-?g$@;cra*qjAbI{5~I9)OTr1qTzP`PYXBd9eZ~c@9>lB{KCz^?#Uzea-SFf zyIB{b)(>HTo;lx>2FsVFcTBux<=FAWm=A!_#w1_4G1WH;*eg*eM{fbrFZI3Jl0({( zb*Ok2>YRg|%(VUbhO|+>tiGoICJF?lGm)32Plam2;8ywE=8PvYT!lXtcJyuaUyA&y z9#|?(u=MXfX*8SS$>2%n$mL)SuF98Q&`2?pTOT+q0=FglPB0eU<3BIF*?+da=E=QX z#XAD0q1+IC6gmj1dO($$FECuTtO^p0O#)*m zj8Ou`L0`$L1VvR}X3fieMJPxq48hYwR61y1PmNubzfu`O$6koMON=>?_f%gMYBE7D z@j-BIaO5#NFM}m$)>mrb*CBzrLs!65X`wgJaI?nN9U3HGQG99jf0q0lN$HZ5&+uM% z=mJSOOWrS+_Z`TsJCuj_z%R9?@pHsF8ojIa%-GG1b%%~;;n3rPVxb`YqLwMcF|1WL zYW1%RsxKw&LL!`J3c|0D638*ekFxOr-N5QbWBh2Nx1K3!!Br*HF&MDALl7fyZsXtj zr|=haC1sURJW<|f3f_Kr53B;CwcqoeZimSQ7w_O9JdbQr)3ZQj-j+|FwJ% zHzVEX{W_IQpwU{^O9GoMu&eO5?$F5s`p2hE81L4v)%`kYLD?#?82z291=xBFzv=>c=f6)n9ZKWQ*wUvtXwRVU+uB&QmpnCIPTLX2T z|JtOt@U1$y|FoHB(1M0wL5)6QIUAf2=4>d9b*QVm`%NMKWu*K9@x(c#-e0R2X20{V z2p&qSCMR0xxA+S?m@m>Kn;mB@rg5I+g9i`eI6*($ImwsZ*=s2Y*0VUi=?Y1uKK1*u zBPA1pE7Ll2eCDh0dO8Ly2V_UDH}IEfk1Wb?7004;eCKIR<-YS?@m7QByy#S4-e%yy z^E_DY{A#^V;P?7o3@;pJCZK&Bi=b~fcMY0%?j11Pxq80OT>7A@38kZj<|+PR7RVX~ z02v0?1BS3684L`woEtEX##F&SEvbc_70TI~9Xia4`U2 z=b88+5_Pzd@8D^?%#84!z-HsoQ3NT&RMFpe&#H7Sd<~HAS>@5f9Pf-r8wt44-_Q8h zV|?ol+-AJIR0{h?8jrq&x57QK{=wC0#gaVpJbg#YHh0)*fd8e@;W?`oNX*; zF$C5wtBv_oLI0WUYmwu}M}> zfc+TH@rBi#K$2x%>jfkz{}&o(EM-w+QHZF(-w7=0_vNDf>2!2&Q%V3<-EFn|&>Ew2 zzpZJj-HkW?YpXpNPxAnUO5+@taAJeR-xGJO0M?*10vTydWfMqjP(Kh|%`ZBF8z4qH zaj2pB)HkpRd;ICf6%dM-_VEMc8X3q;)Yj~Mh_QzPdX={x*J@CxC2EyrKj;M|T&R`I(f+G`D-D06GaS?lqJVtE}`W_Dac z@MtzbeI1uIxM@R9gqbb?OWQT+0rv%j#Y6`ZD!eFSsm^CFPa@&0DBM} zmMLZORGHWx;`9nSuFQ7miII@_g0xR2Dw+%9;luxV_&+~7ET>}~eCz_4@F8ftqUf;P zj&)mFqQiV0Yx&6QSRWmh-?5(W1(LJAy!7R z!zM-7Z~pd^52C{+J1?c1W1Ba1ZjKHs-~7$yjh&xFhgEL2HoxB)jjrADMRaY)eQpdi z1KE@V)j;FL0OQ3#9M8E3^kwVkE=_GVA1$|pZ6M=Ea}rY+$7 zE72dJSmkKm%C?M8dx?2*N6K>8;i^z|9i8<0*)SXZ!|hSCW5yJ^4$-pGjyon`YM2Lo z&5O2l?2L|aYx92rL(tj5{|e#HmW{$>x(YtW92woz*p!8_C7WXmi#jN_?5AIG zLIxs7aPWsn0qkph1t$67j?m5;crnB9L$({v;?;7k52T?9$VOLlvVwo60JI#C^aWRw0B{1bYf<- z!X2HM6|L|@C!+rsP%okrJwiD4DeF7-H7wGoR&}GJ=AuP?XxVH!4Ru}2)2@pac850` zHCbBaR?KT8X=mL5c^UbBc#l@O*O={&R6Xu8&VyHsd{;(()9itDhX|s-r(Jsp)|v4V z14g>osLV8GdkycC8Q!MCJuUk)Gy2UQP`#qtRkvSIUb_>Z`LMZqp>cdh)}q-tiq>+K z+X~JK^z`5=H;3Gn{KAkM|5pA6V0v`*c~f*QYc!tsU)v^3hr$i5>P8@24%% zb~?yKusB7qTXd8!i$kiUUEi?_HhYzwmC3BVlYE)cG7l+ki2>uy4II% zSsQKN^5d3v7+i%f%Py1^?X`_OGO?`{4<+ll8uBe5Jf)?0& z?z`uH3Om++Z#|!?mcx%+ z(DCWsdWWly0UXI;z$lfRAUSc=M+;wu8YzPoTs5j%oQ#`Sc6LNfOJmL_QJBOi+QZrb ztBMiJ#OsGNu=rz8cOslNU^msBE{k0ZeckrY zO3!utGqjTJpG}rDuC0xhw=BGEJD+elc-tXwKD@c|nMOZOm8Bo2%6jpp%4WvX*ttea z*<7Z{TOQt~$y+|(gjxaKYUOQ6Jgtatcm4osCCm-{P*XSA+kN;@x9yJ^CwdXj7=z~W zV7?RepKc6yR~Juk2ejDbV&C~$>Gl^G$76kI=X1Ha5-uKGJ@hmmUYGMb;EA13JrqFw zgUwzelW<(6lDvtI;B0x1*FPRN28$@)=4wsTCg_-=+>bWK;FSrN@u!B^j@;oY5`3f= zTKglt(A?!H&@Cf2>@j+Pc&+6q6MGl&Jhad2zv9Q^%D?CLJbs50-}CWpO$V0h#-sW9 zhK_j(KaBu~W$_-#&yJnP=I0fX{2%a>h?iq<(VAA%@=gFpb$3XswP8ucJx5m3&xc%7+1bvT={}=w#+5G^ zSH56e`GSt}`Hx3~`7j5}#efB`m=hm7q}L*1jrO1bGGRe{7Pqr}cX>*Tb{P0LoT&vxshJxaOt6ZF%lX+sBdH;b82#BmQyBg@lW9%5u0@udb$&08LzjE)3F5YGhFbH3s93x zP@%7BJ_j`Pnj`LilaiBsKa#;xAAe4Gk7Qrl?bkZ9)&#Az;QsEwzdJi(>75pB9CI#!OTzR1{RSFsdfy^8RL~XJ|0_`+dx40IxIdHnsTbLMy&>$L>fR(B~;;+Ha zU9)#ru^H&ly*~KkIp#ONfbj65_l~UwJzHP=h!EzG{$GSzj_~xn0Ch;p>5?)BDRo_g`5yLzn$ag(9|Dr7+7V&BD6qo?b~{TqkdeAB zwaoNe!8c0SC>0oP`>E?1Cir~7r!_5HgaSq%gwBnTh}_G`VuL8m84uEyfH+l zh389QW8tSL;V{Ex=(?^df$dAu^DdIoV{sx+fOQq5ZN>97*JM=kr+ zb*YuFeaO@5f4~}3T^ColwD4iP3;Vak%Uo97Sl6W%`Cb(G7X|(#p?|jUk}YM|I%R8| zvM@fP-*sK52y~V}pDNH#33Rk#w%w?)jdfjL)`Ex79|Yf$8#FDP4^bpZ`5}D9arF}P#<&uv{BC+1uwhev&qBsRb_gerYi-c)3csV=ZIWP& zD{>%~Ndi=ALYxAFj(aKwmTKW8!p^m~8{?*8^&_n_edd`#D_v`9j|}%js@7)8_|@rR zD2IWdV6&%qL*NIaPp93LZUm-Ag=$P3)ifJbM+&M=7voM2j-9dBDdtj#%S?yMIdLuz zIqOX#{>kz5FJ&=jA^WT&LSx~xNita_02Sk^WmD4c$X9(Aq>pcGO!;qo~sV_~EH>M<5RmPET!AfxrQNOPKGh@_zf=Ef18 z;UxV$o-`0ias6BPK@!g0Tmu31HIk+^)wAkAcl)`mVsWsft1WnsK;zxUg7t*zXN>n4 z3pU8B^@=J#uG|s!3rIi}X&Vv}e1pKY37ZFix-PC@2QC%q-yUc4F3IZ6tWzcHrg+vU z$vO^M{u#ztggWSZzBUJ5&T>EgXu~;g=j18N=*>Z>*7k#z;zblCwO@v)!7z{H-^-@x0UIh#q9Q%h<IjR+=n92mXnNY-Ts-?Xcm_-&f_qjBefC#1FNoz9gn2F1``4n zJt}SY0aWq<7dH#|F9|;2N%xuQ&oB-p{*2?x{OwG(C4HGTjF|m7I*IKK ztpb=N$GWb;-yU zYNUtJ!0A(6S2ohM&>c*v|6WQeH>evW?NKp2l=MMINJmC{I=P>#CVGqC`T#hR#=B4^ z>)*ibH+5agv$?^p|1|JxdpM!XP>;GU@s7enFjm?8EjY&JC-7XYS5)~+&{aHI=qjiK-ZHgNzIw~n zLcdgRxmrlvxZu80EmYwpTyw1!D#4qG)(V3K(Z9Mb@wY;w$X|Uw;YIn!&BBZ9;R(M0 zUMV~9p*0C3ke| z99|r6Y6rAVo7XHUU)8ed_lX{!iU!fbZvj8+NYiO+h!&a-LUq;N?(Vm`1z+qs$6+iK zfjuP+Dh^}l--1lM{qS@f*---Pqc!{{Hc8Px`#T9c#5!EWvwhPr6;4ujudH?}XwrY9!$}olrsEk zO>2$O?npfcUziOr;4(XR!cJt1&nSL#_(q#zoEW> z0;(vtK1P$)b;%SdoSi_Bs)}h^!!QimsO4NKXgw#TIJ&Ee+R+sS>`m7F0w!~a@V}sS z;sJ&Z;Ek40P-#uq-fq_@VF)XxncX{3yUV1!%(ue7rq(u9+#dP+8q^+c3Du8l3JAhX zMpI8YcLV*nr<)7gu|%w|ihdDeRdFmvRv&Sd2q3%jkM9CnXtRMfS`S^(K5WyS65Y|C%wpc!aw zw5B|o8~@3u&4gmiqu&NnSjFyzL%>Y1+PhV@M8ZrC{g&|&4o?q(%WD0e3059)p|sX? z5BBDyN3IerF>Y|Pt+OGbv<=na@BBCGAL~|e+w_yHlc1i?{uM0C0aq`i)cy?PS>Sst z)Kw$)5cu%ikFmHO!tN^5e@dkOQ_5sNgoE~VnSmd`-ii*qatlc|n1vwLLn2AFwN0pA zQEJuOIVoD$f`-&9Mk(c)l3dovgo?u(b74p_N@eh<*6V3ut&#+$qtx-A80#VSTNK9Q zlQG5#BY%>$x5pOKD@v@+)EuY5{=1g6n^QC6Lqz>5=00!d!cJ5VoqM}}NNeB@pl~-j zssEzzMlEzaJ`0<*Chu@ea?)pJRoCtR8vDb$_H}o^MwP49y~F7iwgom<>wl*z>-(iH zk@{!xVJoJ&|2y=8A)uyu&Q~bwvI@J=D>K!MV=-z$NA@#3k(V^%sDuk>z1JgN zy`sp{Q*+`v6{4)CCTB{UG$T2sO!~WVECxyJL=!E~M{TS|c$ZFN4e6n=PWmYut30K#UPftSJlCYL1p6B2 zXv;ZU(?+&HXgyBVj`rQOC~CHlh%l-NcFs&A!#tg|(%hsNfz|)>H(<8>KSND5gM>Pr zP`wMg>DJG;+v{kui(t2`!2m^L%U(VzpsUn&)joj~6Z1E$EW3>Q?T{xpLQuCDP9MUj z9L0ScWFn(6pNnPcA94y8a221fg)W8kWp)>^WU#2hcrz?buipkF5qD|JwsfF!>sdbY znQ@#;VPi27E@Zwgq#{{2M5Z?G)*o=Sjo`432l@wKM#|Pzz6TE%J_8i$x!?{ZUZF&=UOY5bW_G zEu0C-LDKlEPM@Lg^N^Bv2{3_xy%6CuJ@0`gS`}^3qL0ALz=h6P_cOI2zZ0d|5CKe% zNA`B++5Iq^N1$aoaBEA(y4gO&9+}NHLf{?FhUh=Zn2W2hQ*cZ|ZgH>uXGkM%|8>~Y z-20H4U^6lcE}aQ>C73lUxLhL^+=G=MxCR)5^lRLa5gwu9jN(haMxXg+H);deV0*W1 zSd2`BC_eu2?|a{mt;MY3uoeoUQu+wD^$NxSu$V`B5)**rAqY0qx>k_HJGycn)omXd zi)d-nV1yDD4P`yl8QQ1Iuy@vWJ1JkU&wObN>OP(q#HL6m zB$s<`0GFM+R1H-lq6Jx_A_B{bkjP)!7g_U>6WgwmH~=6CTcnC&@25bqd~8Ju6jqLk zVt=)hj2bsf8bxphOYl|{dt|Jfw);qyyi2e@7MpGTWk$b0yIdZZ@pHGnMho8vrF*jY zLmaWhi`rpIc@$Kr@$6+zsnLM*HZg97Gb%FU0R(KK%cT&d!z0M_cfF zycfTt{pL|ThyJw&@Y=%-c+W7V;9d5LtCdP2#ba5p$L6b}rNibZDhmJ!RaCXy80fER zSie7|{iY?$812{kKGc1vaFUKw1loe*Y)<+nal*KGoRhO51y&l=I8Z1~&QIY)f>=%E zzOy4)rC5%QxX;7n%$~P!DW0520d8 zc>e_kG_nj}Q35sQhH1E<47Ae!8_JNvqFOg~6v7?2N>LgQjiVyARVc&ITWQ8?G+A+t zy6%W(Iu(I+>oI`X@%jwb>5XKdl>YMVdjP+a;90d!13dU#aqELm!=eTc^qKp3aqFB% zl)xX_h077{S8y4Df&#gG~1m}b$*5HyeR@L)zP8y{~#W%zMAbAAKr5Vm<7 zJ{qklgu~ZLz(N15E&Oh?J6HE$SfxbgvX&Chu`)R+l>IcYyk4j~$66VDt&=`OeP1~n zdLZW;voPQG!8gd&vAcB48}LOx0cb875|O{GiIK`Qea9`<=i4|RM|-%B!q@bMTUC|H_Lg5 zn14MEUSn%jzv5!-Ga1eXGqH`x1; zxM9hUW7i3J&<1tDh0qqq)z3CCXHR#s-~YpPpJ1S^}3@?hR3b1{x+Lo|8dTf=-218+{=X_Chj{xc-1<>aMF-lr-Hd2k=&<-V*WpG@IDb=uA;*DiT$R2K4}7V&a_ zlRT#IpHaU7f1PrVNFG!8&!~S1f1SL5*U=ic}(FyHC3&v&VLa4q55~Y zeJ;+ttMMh`o@kWM!<0(x5jqWJ6%hJw@iWVT;K5JB8{4F#6CIib6Vp8-S>5eSz&|Ju z)kor`u+#46GO>3|Kaqb|VjEI6dULK>hEO$CmP5=)tVl%4^3cFknr5JIl*W7mn8h&3 zG0bYc>=ya5<6mX!>?o2aDa)ppO?F;xm-!{K=GZU6Rv@->gRAf^e6^Kvi$!-^SvgW% zZDo~wgqz#Sc&6CZ7JLPN`Btru8P`@;s$Pv|$>SOcXQXYxMR?=CHZd}p#n?_OeX6v8 zZ!g-p{$8kY_Xhl7Jq16i&jl!RH{v3~8#Y!l+!$PyjjgIPU5>m^#^jmiLU5KTl*+Qy zBU?Rk_evz9~kTL{rX& z!tN;>=VutpL;4A^N|ogWsk3Ye0KQf23)lWq^i9ToB8W zoEs83T#$>5!l-;e?=bJh>Jyp?t&62In2eiOHX1=TI4BGu1ybbTkxVhxNX!s6F3Qw*xv2t1G^8gn2w+3qtGFzoAcNET&rxYd8TI_?Te7wfQ@ zt-}RtTX0m|c5uHQ|Fs1E=J@3g-x(#qx<80 z{~mY+5{ADTb*Ctv!82Y*(^yH3jjx|mX1U3LkNUwdwU%|f1;A*U9H)5~*9PPw6KWCt z)HvGiN0sOh9D5sV5bL~TtZ|3T3yju!dm{3%7t@XV08hu_d3;ni#-2@4@5V78kC+zz zdW~!&%{ZZWgTMc|8{)?RjO#sx&1jPEq50=-h<%NXTnD-l9YJpicBNx`a$%_1e?h2S z#Oyz#c7GZ!O?j+2)b1aOjQ@fafbw=7H>;1~etPm%J8EETLhS$mnzX`?;=sG3FXxc{x@py_S5AV6y-II;?9D4XT%&fgNx;LI#c(O-k zB7TXp9b7ksYVB6M@ah-gWyRld#lX|#WmdhTGq$03>>vCINc_O@l=$P%Ub&+NCuo*Y z5)qLHFuAe!fgsW-kCzHad_Vj6!sc3Ea1^qJP32Cg2TKFHJ zPA;B?R^h2E5uJjdu@BbOgArpZ(lwu`J z-p>WA{Hf7EI)F5u5FN;whgAwGrAtm=6~`OJAegX4B1|Y2pBwq$Y=LtDJ5bxXY_lcIY>#r4hd(BLmG1vHiKn@r-R*YRpruriGTU zeh-P%+O^Pg_$vGk1haX*|LwHmzc2^q`?zoyppxo2>{vAbY0;>U@ zgVJDLjw9|WK_y|6V|apkwxX_Zla_P7AFoc4W*f9k7-b{0%_A%P2khm9<2g#zS<4Zv zg-xZP%#UCINd(PwIz@DiEux>}Y0UEj2V`$Gl#e1ip9J@8)e-#yv@c4b$6j6M5W~Ffv z_x;%pIus}ld#8O-L`5_*~vN*SYG$LtP-F-GxKbQB`o2rjN2pmF2xN533OU?6ELV=A2h3FCbRgkZ~jdNFzt4zI`rlKwgH=K&7*`G`G>?{m~QAF)P!pQpb0 zh}GgdUw!jo{gO7MEVDo*@nPMhlFn60d{`rqWXm7G=c^n(EUp(I=>nC+hjofdDpW~) zSbb8;|5WAhVSPturY!S9mBfejiAusNYsH7fee^bcY^3E`eQ31#ToG?0v3_7?e0+EM zuRUSG7*T|I1br#qiDRCIl|?qRzaM*-x;)Ium$y-r>b9B>B)mo~5&qf~40b>7m||$Ui^? z4l!ve4va}fUS0#qEk{I3x{s4Tykk(WinyC2?jTU+8ND%%1y|#=-ly7I_w1u8;Yaffro`jPBlbS#-vQLJ%KhC?9dexv2|lD9QNx9&WF^p zS|hWPD^GdjTjJh2gz(bRWJz0(P`T^@!7l2q;kX&Uyl`C;oJQztckK5B^n&^@pb;qUY@nfldPTBsks+D5Q?@qGrr&NQyhGG=)9uEsK=OAB$q zN8k5k@%vgh2C%xXxV(t9eJrd+W~B!YW3>tEdamNb+Hcn3IrL?<{zDIrOi>5mmtCq> ze;mK0(00*`md1XvX=Fi_3WqaIu$ zy#vNx3t_eZuqxlB+LDhW?m@+?AIvP?FvmMoF5A%-a33UD*$NbRx;NepA;xDR_3$_$ zUKuS93}H8ooo(Agl$q9JnHx}s4XY-)WDm8JSr8)DM$MC_ZKSHi*tAw#f-5w&FwZ=|*Bqm`UIK2wbrHG7D-TE?SspWHKSzNg zWZRt2MI%DMMS{9b?Pk$s{vwS^WQ=>kP)Ni6@ozTMd04PR(drNYbI|9qftfx;F7!J;HcD$6SgmW=*qL7UIrX$!zYbFT1!_V6_F8vvwYP1gYOL!# z#<+v}_{{1c_K&0m+prxNQ=95ys!=_5B5+ecwsF08Piw7zv9hnZX8WOZ)&;Nwu?_-K z_{b&1ZzAJ(EY@6X0~nQF7?gB!+qvv79WN>tDd#sPSl1%>sd9MUQSj`wI=e|c$p?L5^#j_>wtzD z+sici$5sZH8|@}W_wTuhJ^o1w@f$$wAVsZ`*7^&C4a<)@kk>np6Q13*Ea3JnAVZAB zLE`4)Ty3JP@nPMDc&SqOM^H`9MIo1>aC_i*SO%zP{Yh-gSI!1&B82Tp9K`#b`Okk+ z2-Y50P{rt|q;8zbXahh&Lb`t!He;cfPh^1e|0O=N1NVtqlfV=-z+A_VSNBeN_IT!-pL2qM?fx&l-U@442`sC5bX zQU_qZi&D*ZIs~O!X$$hvaH^G1{~Cx~wN%5+c&!GFOW&erWS!3)p0=QWdl8zv9AOMD zT){8^$of0;GbmGP6&uMKWqUY}CAD7M;m>4uYhNm@muXEyX(9GHiLDTdUm=b7M2|6* zj_ZfBn(y%sY)cvZRGpfEL5!6(fejBWIQ{?{{zOQITF?t0G9R&S27hQR7<}&UNZSFX z={AWjZM_ga@^}6w+ve^=;4tm51S|u^k#XENfnNP1dbQdwvET_11+!u|7uRZ`wO}4G zh$0;(Va9%te~k&_WZmD3f*w_HZdqy#ShSRkVg-K^i(PDUeGxwbz~L}B5DY@uH=>G; zkTPCoJy4W}-8>Bd;5zmavuW7NvT9M}#{vf5-dL&b~rEs{u$fXai2i@n8>Ir zGjIW%)^ti_$l91!&Pz3&QeC`mdUmiiyZFb*)oIx8&RZhl*S4^pl{YGjwv0Z4i^3n& zhc^HKF80w8@d>PdU~KZa0)wy_Lu<%|?7DrAubSx0rzG|KguO!Mc4VTv&QGgo(82ix4-v^#yO_LD)lliYY`JWz@|6Ari?&QC5RQ`12 z%Oxfb$g@X*Tt|@W(AEw}!%-ml1jz@;5%pOFAsoRk&LCLnNysK21@bUKw$h;6;>$e> zWGX?pedP#x`;L;|a6CHY0@+U7r5oMK$T_#RP_KbjR4zVZ>Y$2{B*4TA$I_Zk1xAM!h7caVo%uskN-s8?!g0# z%i+gRrBrCf*_fmpAO;tcckC1%C^Y-F2G*ln4ngl$^EJm!RwlD}b>MICkN=(+|Gon* zRLU9H-IGw6Rb}9nBfq{Q&D7>`Nw9b|#z(DzQ+V4eZ@7)k4N@6@6{ACfuqt56eDPed zOd|lG2-)?OUlv#w{B{VOtGz9Br~)O%4ViVH)uNK#`eJB1oz_=D$ zwH09CwBV{CavzK_Jkz)#OV4m}^f7M#7mPo_gqwqR%YcYb5`o2@!T#mbB5dDqQZ-@BqKK13hYNHhfETU-m#eIqcBMG9<1A|aBeTT!~A&C$Mu0h+Xmi12|7${O9VRl{S0a8X9 zCgP(}n3IKkx!o_Pa3d}=l(h|}7dGajkH?fSfNbbSu)u?ma9!L5p$48@bgQT9Gxq-_WUir#oG^Q2_V)eWNj|X2DuK zi&ShmZCHdSxXjk`^c~ugw-FNq6>Y(fNT!`aYkPBHcVyo%oV7cjf#q4f9D7oD`|LPl zq^;~Th}Nyu|2NT%QF@;jxVn(nvhp_&+`8L`@X#OOBO&%6KRSS%Djjzks^7QaR~rhe z36=`#Ah@#};RTl%Si6bLl|P8!@?tNLq-W+u#?>HaOw5AF^7OSZQ2DqHZN3BkiVY6` zKHs_*(jr5_m6;M!lE9wFZ1lmV(tM(}oo#yq~O4g&CHoRQY=~`yPqU|)8}=czxi;Q%fB6}P=c5w+Eg}FbT~GSci6)SUjp_@ zu(EvtZiYzr1}@}0#n1bSi*$PxX|$?Ci9QJ0`nY0CT?iFxAY99~3>|&7?@uIhk5ix9 zphLt41;CaF)Mo@*K0F64Pg>C1BA32F3%y2d|1Ne4?Rl`(v-RiuI&*%&QW^Sfkrq4? zC54ymaB`)(<(pECj~bx}+LINT^W>t8)rk0*Y0{Z#e&2;l`-Du`}o6U~5|O+Q2S?oO1@9 z3H=J|0rZMwo<5IUhwTFJfHL*>z+9HTMPC^^5mxZleOS>Bws{ckMHP#n54;utS3=

?dr<}fNikp$R5V>{cuessOFbu7%-_7Ic}|pl#l+rsqfV6@{dv6^q+c! zc1=%F52!kTbl{m*-7+eY%3Ib5>d!%;Y}@u5rEBiH>Q7_UUUHnM0cRpe0g+47QjJYqxlI6KgKdKYH|DgZn3}khI zKwn-hko9kQwfdreQOHgISSl$N(bWHXWN+|~W`vThDvG5mkTy?cCB<(2=RlN=yma0d;FE!EgbZDP?T6qce2|+gglx%S95vTY#zvS`lyi z5HE<8a8dGof1Z8LNrKqlbiRN5@_Oa$%k%8#y4HHuTF+YRaZMlA%u{{!MTvO6TAP@e z8}rPqS5pwwb~98RmOYZ`OGbW7*`Ei6J_dFGXH>J4CHJAAKL`COln;$_yZ!SuT8V_l z)bD%;0=D;R5XYm6EU&O94Q)YdRF4P)Yq3t{^HeFObc}snyV%s*`wtRGdD_xZw)-A^o2I2xs)v==(=w4p zNYSB~SP=h5cc_Q-Kh-yDCCq=JVmEShw07SqYR+xbhV7%~8@UaZnLvrp@-yCp+5a$rknQAmVql)2Zu~f=A1N0X0~OMjGB)8Cs9mSXL-5&<_1pQ0+UbMO@r2tNC(q zI%KU?AF22Vq*m<3mC!~VP^6+5rc$@VPF!7TCuU5x6AKG9lh)cUr|y8AFern>ZM)`< z7pfw7p*tKPWCjp&&eJ%uOJ!OXJ<7!qHTewa4EN z$?v-3)lsn!>g%-sNupp>PC>}Vjg@H&r%a8K86XkP`rl=!1ST)AsA{z4SGz}sQio4# za@kH1hrB`J;C4-&11zl=ujLUGm>W#RJ%Ax#H!b-w#zK+Ats-_v-B$BOaMKC9w5KUe zsLQrmYwgKBO=)Ufwu!Z+H0o}w&beg@Ut!3Bd>NM6lHCotj_+!WZ{%=$q9n{HMSn44 za(U;HUZ7ShTQqS=ZnbA_SpXKn`Rk9{C8=B1JO7``Ls`()QU+N#S}NueI3LDbW>AN8 zJ8=pB0diPtFPRKUJQ`Q@LLKN^`;frvQDI7e0I)b;wKZmywnxAr78OtzL-eB2F=P|T z3R`>v!8i8hrRNXBtgyQ=5_OwuP*m(Hyb0YhBq~|j#IZG;(c#`4#$SplnOY zmWaEx@=L4l);rtn#cm$MfX+xsXZe;JkBiW?a(~I==F6=Yh90>4F0#q*%xzw+Rho}g zIWzlwWoY%?>O#}c~=zdVPwQq3$AXRjEmvzbZa`cV9Y@^CwSoRk4-dxK! zcKJ)z@+-~F+tTl>oXLF)77VX|)834Ml9%C-(vWLEx{Mm_hntuT=el-rx%PUkWz0j= zdt{Ve^o_C;r3Q?#gx>A;qAe=vy}keA_gwT5>ONR6q^|bXYVL8A&wnG$SmI=VG@Nk=;KNO@|}Z=)FvFUmc5jSXVe&4l{9(`HO3!oY4C*0zlSKd`0;Zrm^J_v(N=29rJz^vI*$G zdJ*ywyPeR|b7p$eMnYtxZU^cPnL}eT-x;c;UB`i_;AwpKoufBbwiX;mjp11N3k@&W z7?(Sk4An$Kdn4s6c6g3+NXJvV5KXTV>ik0}c^6kS3~MGDnCs?Zw|$F>{dG5!>o!tX zK_T7V+i?r-Kj?O1G;WvB)kC?^!KDQeFM2RizIn+Ab`F-FfnCv}u2t~^qn5p;GfBMh zmwql=aUvomz0MlBd%~r4t-?{lBu*yLi{wriObXH)KCCW#2L-e(*EyGZA;g(i(5}8!m*h<8Zito3(a({NPuX&Un0a zz>Ub-+X+SsDB?nrzE<A-$W6-F7<##N1d>v42%d$mmRp`)*G0_n9KX znIe*PP_OiQJ51h;zpeJPQC!(OP*<%S?&{zen7XY|_o=8i@m9EPxSOmhw+BRQ=Z=*v z(79NbpwdC3z5&=u0x&>cwOj>?seAxBDv*TKfmYhZq#C(PKSSXRbpbZS$sE= z9iKrc8#@e?2d$aH1;Q#Attxv5Qc)an@jHKZi_iVEzVT67sfoKVF)_=OaS~af*{$%h zxO-I&RM&M$(*#Ya^a>^rN5?J?-`cRTW&b7KWa!95vR6$#-)cFL8!cLWCuPPXF>7R4 zoa5AjoQBa_58rR-bKkeiH!pOlRb98;XY7tQ^CKnOb;yqGcKv8d+1CCCitZwf_Dv?6 zZcBRM9;R6{dgF&iEj$UrIyu_Z{jVh8^UbOo>W!9kSC_wQ-F!CF(R7gM&9ZJ$7{SQY zJ4^xfBW(@`q!9;~S+}U-2<*-j+udC4ewY-pOFt5ALex2uweaMrj~F^y{4qk=ytogJpmZcxJB7lv3-sta-3E;Z~R%O7&x28B?xUDz}fzr zQgD_$k=kgIQP1?wuaR@S;$opmOJ>i_-g_wEeZ+OR4Mx$}Y$8bD#la^=G@l;C9mVe78RA27% zF}KHBp=CgJ<~xV_KOn^2T!s(+ChbMs33Zh(#J2LTWp8Tmtrb7#BPNGmYh@$9$T|nF zLHw!P@zjM~N{s%hu7hp+{BScF=UK(iSl?{l zXU*BT&l;C^wfH`#ys!SViM&&TI+phOJ0}bb^kGkul4s1eG+itW81ydxVWqpVx-OFf zi01^VmrR!AH9L(mtC{uytV8WVIA4ZW4*RhVfKQJx2Px$4ptV1eV zmlR#;zqcbbQC+N}ck`);P)ZBVXS%(Qi{{5_zGFmIRz>qb!?$@WzD$3_fVj`p0Cg<` z!}s`a1Fq=)YE#S`EcIB&TW$!6UwXbF!+tGN63Si9*`bJGf(ia8sm$&^v_@B-C&eCn zMXImOS5Ce1ME#eOEW6-(;`_}Q#r(r0TOA| zAGa!7f0ie~mj-J{CG5dzRF(36tb%E3OVFJ{fV%RvYd(w zNh~E%Jyk*lgU_pCcb|Ve9b^+qRRY^{DbT5Vo;I}cLVw(<`TDE&Ca<;=7l!S`@c|9r zh+Tu&)h)GFS_~J|PsKCh>SN-H-17`&Tlw!A|3p<*BY=ej zcoD+;)`(l38}$l$yR)+~;mCF`3fEU4|H8_4Na1xzjodeY^EtyX?gE5^rXma1RaT#_eQLXdqwz`euDyW7{*07mSR(9da-agmSYG| zA{0qPKT_Eewbj|!=#A-K20hHJQbd(}nh+`9+VD)Ox=^=W{-L$9L7-i4v>a?Fab=8=JT!F@Erh&nN z&4Kc=TUIxWRmA-<(cyAKN0ni3OJ3+s`>A&^Dy65b72g9h?Zh|2Rf&;K$8P%78B3Tx z)4dm*jy-1+{^aM8#F#2KuhIRA`%LoNG~5}SrAp0G3Pv@J5w|MWZqps((%YStO0^Iygo%)rOwi1EPQbD;qe#KMf$ua#8^8sgBS7!m zArLgrw*pZmdw}(t!4A+KR|!{x9RH~Q9O~bV3Ja^3oMH8=G&B8vJXN20qqz-w+?|CcW|0Qg3CjOh=8n=< z2c`Xni`}-AQvP~xzCh_QwL0AenJB1B=`JSE0+lFtT2OBFuyO}m`SN0%_SL#HW1qZ& z?}qwwp)elr^w4Rjt(_ZO@^twCo8*e%d}t?-Pd?`)M*Bb6#yIz&lOX@}ApdleAEtoa zvlM@2K5(C}uQ)1C-81X;jsM43Y9-I9w+#E_{)l)_M{`iDPjs;yGR{QY!NqR7T3?T% zSAD-R{FyzgZSE;qSrUW%nuQcv@&u8TJn7+Ji}AihCaQ9uV#)EZq34nZK0{~OUbj~4 zqAVb$o$q5pNv=ejD8i0FD*8R_ps^;Cp^XHsW4^_gDq%Yxie~6bIToND*dcZQvhSIN zrbY#NH*0BxiCeLW+@_D)c6qH6C<6N<|8<<*l!wu9yxZn7f)8bpZ!ZqsQ$+Co z0XfH!u>djI-5b2SE0wo2$UA|&e3oT)1^qaQeFlNme1VTz>+XrsZuL~1EH+&%^uLRB zp7hVfjF5Pb7yS`HEmX4U2@P(F)idM$kUEh3x_~Gc|Ka?cQe}_VOFOKRM~ZfFHTHOW zgBwnKA&1-RZZoVm9fcPxzMGZ}{a>qfYKz_I{dKw0mgOU}IC20u-u6Y^Vk#!-Hx_9PbW8`Z1Ng za#NZiUGbh#$uS6b6g8$YwQZK!YB?m{~_i%{OtiMg^C(gzef(dgxns%wMi z@M$rx?jzMb-$}rxUhGXS(Tr4578WlzyWysznF8l3Q`)sSW z`DtOOweBglxl+&h0F_cU2uHb_jQ~~KeUTUbBKC8+);AFx&)#^$iSvwr^-Uk!xMI6! zB#jDMRX;It0?pXS^L3rWIY+mkiG57?*jd(!n@N{?{UbUCyGGIVw|r!MbAR$-ttY@> z7oMg%g|_c$Pz2iZ8rQO&=!X3lxijYq^il?%$=Iy!;trc&Ob&ya01ZKJ;p;GoM);C@ zoH3;??nyq&+8#>;)2eN*MMh6Y^H)(0E61R$6fRRUlK!Mrvu3557312n(`pv+WsH8q zcf>87HY(~xMiIXgN#U?{%M3c1hL1Y7H~YfwiSUQnPDw9WZs>DLUU53!%QiUv|B1Z* zrl$#pBW%SMx_fk_F{L?5o~yeGvWTPO zb_%y@FSjB`nG9C6OCRRD6We+9=i7tu2g=?!eNTjoT#BN8XAE z;+I=Vc${(C_@exVr!qB%o|Elnr2H*wCxoz3i8K@dv&Tf5|#fPtL65FX%nv0ceZ1=r6fL&ikN%!1Hfk zz|24k!VCQuh#rublG%8mRoOrz9NZRnUi-#8&j zP(Vb=UtC&_+9Lag)e-B_9k%;|?adspw+-yG&g`(`ZxQNl;?;f4TF|LGD|r#KHYg9G zEM7L#40Zz>mzf1RQ5jB*N$YVksEQV#!%27nl=+}zq=kurH;kO}kz1NPgOVAoW%nB- zAtpv8X7K0Z`5xoMHccWs&;L{PjCzWx!m~!k^72O7uEMObU_tVuU9{EAbA3v zp**jKh?`PM~Sd8m2YBc|$O* zvwOsXBp0D{C>uyVN6DZe>QrLA?zUPnbwjW{Xaw8YknYjhhIF6FWw>A+gR2wrDHOTD zKZbza$ko5?A6QXo{2IMXq%r|6CQ}Nb3}go4^~^xLPR7AF>RXI&0rFcv7rX7hv{cNX zyyTw{{%P$aT*ySkHDzisnTE>8pW3Kw3W=pEmv|F2CTLu`vB`O`9flAje?dJOzv1$V zdL+gC0tqXPJh;yo|3V|xS!?&n{wtsHcAqAeE!)@Cm{~D82b6Q4Z@rI{gkkJKe*||< z%T9^XuoRyZjoJCks;_fEgqp1SZ!wfAL9G_PR=d9Tm{A<~E}4`JNY@L`Nwiht4;yTcc1R0Y?*N3_yc*r@J|Y6;T?FjeaItZw*r>1Ard z>}1nw@4_S1UR9V4iE3|2OK#tIv!5dsCtIu497@-`nXhb?PrE#;{!P2-uu;K5r<|o% z*iC(cMeI+ikcGYQb7Unv;GR76hmIE;6Jn{&VfU0`&dzk8w~C$DOb3#5U{j_8tRF+#AE?4py+B!)o$kbr z8Eo~^iC5{wlcp2v20KwhC)(*m`%#^EC|~k9mVAD0r(s}?)T_8xTAKtX#+d(*f67%t z&4a$pHJuc5_wkB#V6T7Z+d=Z@N#?}?W$o_J7R=d4ZZLyVBPA$St#E=lj(d5oe=-qt zSf>P&W0qA2EOV(&J5Vj6S8Y6GC4US-nzxGJdP$Eq3BGnI*o~k|<>7c{3hQf^x9(ii z9{*i(NLroDw@pU|4zlt+V7elfN?o%4nGLXZvB9O)ZZbdsj*29g8Uve%D?+<{db>>f z{8dPwD(zcLp6Z{Qsvm-lFHoxfx*B?qPRDE^G577F2Z0=BjOLlP9)8_t0> z1h*>u#XK8%?k*K$Mxo)6!Hq@HAMa-DVGEgjJRpVbioodHWBaO$x$jH}ookI9_Wkm41InLp65BVcbUA zWT53YGSl+mohC!KF`BFz|D)42fCv4%zo`K}^XZm%_F1!^WqIzX9|;ETz2SJRO`38c zt6R)4#6KQmwcHJe1q+pe0S&?zXN_EMLT4?N)OB&thVOF;mTu-|j(?!eI3><8XqZyG zy9c|Ozz{M(tmr%By4KIG1&PI|n})LW`MbiDpo>Ayg}hHj=rxrj51Ni1;u5H;O(j21 zRnm96+yXLxsD`a(5eaFD@J7$K!*H0^E%)fv*(1g?TGlPU;vsRVPS})7tsGAV*DbnH5}^)vTUuWCpF_}4N$9REgP_Eh{>~VRrtj>s}@HQj9>r)m~n{RFN+; zsAi?;3I*_5e#Ba-#e&4*GD0xq&&}nhR+(!i@Z%KnQ&F6ON5tar2|z;LIB4*Dl5G*3 z&fH620J^kyAIe#}*FoBwQ0w>61I5aB@K&YP{#jY~^Q7WypEn=!qczuSr*?Z+nM}tA>wd;VsOS{-WNW8T4K>z z`=3e1G|_5?yG2jENb%VxSnC!LqP;fc-6jlDnB$Tc z;hYJ}J1sBbtuQam8=}R=#u6euZ!sZRmiz(Ex2gLh5Z7+%3Njrm`7?*EL}T9AA9c}^ zy8TtwV|is9?saXap#7lj%|<-vFlPmET|mfeDvEb4xR89uJ9Rs)$0nXiXkH5V%Ht|v zD~H1{9n5gu&eocN>D->unxF1Pi#C>G#C)z-~e zScU}~S)9yLx3B*d_!GkHGEi$G-n0vxx&bF-9NQ;Ua|>C4Gc;sne!gU#W_<}x;agMg zV>QSFv6`n?>v9!ScM3lR1jJ5gTwsDrHXACkj=1Kw_jB{IL~0xLt-vezpv((!O5<>(t?e2L+C>`QAt$0s@TNKuSkIck%*4jH&N}Z~&Op zxF9uOfMW$r#krFW1fP4>CY@bdtMecnK$NiNfGIz7KdSOpnNhUX&DYTai?Uni6j>1| zn{GE__bl^gt($bd`$~k}fI57X*G)U$oA&+kKqR)7e@8^C=?P`#a3ClZ=EBp?AX#+I zT0Y$*ZwQi~hL$P$>`ZbI$tt?XR5R`TOu}&_(4P7t%WmopzCKc2x1X;keYO0)RN-$@ zh27K>B)Nd3`9?hi&IHzSanbHG z0RTlxx+7lr28Q#E$MB)@9B{84Ksk`YzjmOdV*%nNFaZKiJRaDZJTm5uSog3%<;5y* zri_jN7Xwb~@^U!~3#w3%9|=84OnLCtse6Z!oj9SDBLLRr6-R)i*4iVjSi7h8?=Z2> z7r|-yJftgtEdqrsuv!iy<9!0GRw3>*bqt~aJ%AR`q9UjPt@I||0O+4gZvgCYE@vJ5 z^P3n7Tu!Oi$G8T+{4anS%#yy@9qRF9Gg{`?JR1o}Z!^0`GQ4 zT41f=k9c_}Kt5st`EYdF6GD;Oi=RR0MdqM|Jcc!?h}P}pD4cN$vQntir22P6>u`7` z=rYdt+QSh7A<`PeiPm+Hs@u|NUAx}r>VX4?r4sQj%6AYGK{wbMMIZ@nMqkY~y@N+* zVaz-Cy$$A++Ux*vCXs7SQ9i(l*AzK&2T^FENt!}Zo=L(j^o5dVHLrj-Z>N<4L;unv zT%2@1h&D5YWye6Sb~&IQeW4C`kWL5;`^vGbCydZLg zW>sG85d1ofZ-(%zE5NUv(?Knw^pE&fn}OYlr+`?(FVJi#G;#`^0m#skRV7b>UtoTK zUlXT9T2E-rWdY19H1pV+H$nO_tv_%nhWE2tJ{D3zPHRNKE8^D|#lXC00!*8K%=IzA zwlu{s$o9Dh4f=P3Z|aw-Fes#Y;9?noUxG$|y}Lp@eKqlv0P(JU&`^|2SMxYG#30^9 z1FgT%-&`5G+qA6HfuH3~nm5xa5Tta+Lvpr=&2dqP4#0 z0@&lBQ0Bqb1!=Vp`Gv9KjAfa5RGLFi^KO zAom8r%mQ{af|W;F^IOM>!!!t%+gfl6`db7xgJV;1ytP^eQutNju!W?41gcDr!*Ovx zgc3tO1x$hwz~g)EpCrKIVU%rh(b4o5(IQ2E3y(#A#s8(~?**Sue*@_FRQemtz^BsR zAo&>dH%Q3P-@gVOpGtp&GCrOD2I(pK8$gF7%M5hX2xvurPhK~S{{Ah{@zU>)hK~Oo z`OP)tw_+Im1wKqDp!gHD!$@t4qj8@PAUdG2m(vHhn+%QZNYhxIEhrlMl|TNiG&YOA zad=Gz+6|2b)FH5~mqKF=1fRzyTe2K54&>u>+fp23ivCme(6)V&{)1zGBmMuKiX0s4 zPtt!zubn-8W4!#S^nZe3gV5ebz_mq=8!nQ3+m@Rp{iysCKp`8x{|6k%c<$ausMA^( zMQ{*xo-M)Q8l4|_og{|E97$+I2$5V1lG_1SnZhffpQy9Y?GqGO&XCJd>Xd%YOz0 zxRrO-a@jwn;dD@XxCg-c>wNYw>0!}Y1BV&uArMB98a`cm7zZ~{fb?+bKfJi$SJOrKdr%=;_eu9x5ybIqoG#X1Zqr zVNldyx^Y-KhOpRn|KBv-E_?L>;rT47=`69>8k6*`vMY#j2-%EB))={)O7Hn8#+tFm!~ z$t}jxB>x%}{)2o>s%Q7;-DbA9h@@SNPBecu<f0cz8n(+~j{Q=cACZs+D=u6Z(AYLH3Y%cv2stshz!%eYB^o z#ARRsPyM`}jelY>O4vEilaFgHis9NW<=;Y%&VANZ9T`n5?KOQYHhnBMrU;zKk)}@# z_tA(EH&A8YQ?h>;)W)LQXnfr013Y}$IjlMA{>ec{P(wTLh(Od&-^@+l%unAeNZ%~d z&BH1srB6WuK{Zg1g@%c*LorkGN#$CqD<()T(MwbM-XscU|4eK{;)lmJY>4-S;sawF zepl@Ud+IUozqF+uZF<6N9yD#x<#GPA%*JA{o~pi}D)xp=u^17X2B_-XRMonwUjI=H z)Q-`_q4|!{#9L(6c6e07&rA~ubNLgg9I;GUA$B|dcHD@;-)1xG zh6bLl5$M?ynBYHgGaE3UEg&E|ba5Y7{lCP_Gs*dv3ig=sInOcu<^@2f7qd6$qXe2VHvCz&mQ_=sH?nWvgQ&gOj+UsGUnXemTZLSO!(W z%#z+q0^vt4Hv7jIrk-E+&JcRYM)X}|kTq_V4F0w6zocjiHb9JXDUcvDAhtaGN)AUV zf4SiqnS>u{co6U#&V>f^=_H!OM&rJ0HUBf^CdU8gJ=wVWTP=6+gl_F&ct7^j9{2-m zKw10x5HrDsKyXgtrm`)l0MMUJZ_Uf;P4b(K5lyJ+kl?6cJ51}1zs<(!0&>K+4>juB z^~)%Cus?i{zOm`h$G|k-hw870A8L$vH%aAZK3MW{{LnItfUJu*_ig>4t7pVW+9#k? zC@|p2@m6KQq@?lBk*<`t#ym*p7joA2OCNO6lzsm}Q&!OgH3iEinu2Yn+%RcC{Ll|f z?PtUf?TvVq3rvP3uf-3cLPkU0PVHn&TfLu3m|fgU5q&#{!0%D;vPi~da}{lkh@T0&0?nPf zQK3F|VJy=fe>2Cq?s5CoJ?p9C-Do-v2FdjhnQ^3 zLgrku6ZtCs>WPg9#}PAF1Gui;NmNh3rgAhs76h)l0^rX-$DhjD2IP0+yxYIsF5dw8 z&#{(2M|tjHbSM`%9dC||l=R6we46M$t@M!*Z}MlO?mK;_tcrvVM~K}q#ohiTA_k!8 zon|f9)+Iq$;s?%OxT`u*MF@bGqKT|TO%YbzUvjs*FWQfcW^g#3cgsPx&aGI7UGk?$ z`7VZZm$4x#zap!I!GVcCP6B>7P;&|73h%wCC-z(!B@kF)dT)6J+_#V8VFF9hu4>v2ulG5?MHYcTahlv{JUh+}$CK4E* z)M!<5ok7DW5nm%6(YxY>;n}yLj7DFE-8ii-}y-r;RE&+|zq3tLVooX-Kh}|-j zw)HidY?pUDJ{^#866d}^BpFn!jN?kdubs#`k02NWH;kcaTl_B!EE`znBreJw5h9fx z8uXTsWboU1JbWF+wY2gP2FByEA=ESJJT{i$Pn0l1ZfXKy+pP$*kzfi^oSCTGPS}M} zYM%ADeT3Fxj`WC~aKae|Dr}TVdU{;TTzwu->R> zey7q~e!8mWo7{%E3=kZ2_)N_=q3#%$rfN=YpTxj0Al3>6U%-AQaOzxk`mu(>bc7)= z6PgCo^!_d(t`DA8wy|Vm{J?Yq3CLh?4H$g=&DmIP+`Q#LeP!7uY%(UhFK>Gz((;a- zxV|;dwtn%12|J>$ZXld}(;MolA|_XQ_kAH~Jo%*i!&syJQ~FSw{2GmC3O4QoOckQ& zueH9cJ=640+rNj?Ve4l06en?=Az+E0aCGM5jlc;Ax1Qfv;=00E;u_S8BVPXu%XH!o zZE&?QoHX562lAaYvBbmeyoh2R2ZTgJ-BB;F7>>C?&cwMd@tr+zlCy?PBAUu!uA!co zYrdwCjTB-sIZg5H;+surg!m?l()L$ntw|SbPo<8LYL_OLIm_Pv09~wqVr4iHR#0U?}&Uy&_@-w>qIM1FvS} zf6NppF!@O04&(3vQwQ?p_pQu%n z)O*t3o2Y*j(s(FTe?e<*--_TPXuryBbP~U;U;uCla<~LBLF1jH@N3CQ1p>Wzb8Bwk zD80%_e4~c&Q#{K;hx5sX+K+SgRwVJ2SmMWQs}aE|a2f$6-0C{KSv$G2@uV3MW2-WB zh+Q`m)VY=Mk6yQ3i)bt{ALf6f$PIZn#&BHJD9NnNBc@<^*BMND7*3~DA*E=_tktg!YrPy-y65rf z`gH5TX|wG0qJgaDQVNlw;PROJq#Zg$E+So6zaX~KYn*A=!Jg&TSm;UEsaOb8pRLu` zZ89U^75waCui!HF%cq?YBC$vq?Y?&>Zg1IcqY4L^Dp& zm(8?U1u>-9{w}VQ$mAF;eN4pHz+!+F6@10|MThna>Ne@n-i}>nCYfF*=gJ9;yHp7r z{=%4qdI9PwX@Zb4sA!}~@G|2UzXKw8V}H!WZj%L|KjZ5Vn5cm#Q2#&1vk&lKcv0WO z3W|ExuXtqketuGRR&uoR=r0rhc^Lc!XCcNCXU*dqm`sJQU2fzLZCxy?a*rU?fkbM? z8c_wo&0OtzEzq_G`c}N?G^}&w=ODR7CT8;`%sS>PpfQmCx}2QP{Qz{+BeJg^FH1ev zYOmTcybc!2p^d78?GSB!2M<&FzA)H+Gl|&$Mq00(fD0Zm+v10hvzlL08~KLNo{!uq zQ$-e^Jm@04sP$lf$9wtZM|e{-fgyjJ2q$y}=hzladf6t!x*GsU#XiJ$mnnmXw@da^ z*Kq>olfWhr5UWOo^CZT5bFRSV?75PDZkarON#Pfu!5Hk%*4p=#8AvB6iM94%RcJ@( z2)mxPx4KLci(QU!^JHd5dqu_N8)kS99IyASkzz7YCwXU~hOVUJX_r~|{F%USw#cul#Ql)LL@Y}y8`(^HuYgG>< zMj!xSMBFv9F%(g0dP1~l7-SEF$8`L;#I61qzO_qFT;0eZ}C=8SQSztMx zX5a!mOY;lE@IhxGUI`97i6n2`@+VdY43bBTr3F@TFCKFrSe;u&ShIFmSMapi`Uau6 zUiANd1trfc70?&bRl=dooUDgpJ>X#WHDdpp@S#a)MGYOv`)S|U%zDNidYJv5;={`Ips|rskj`=Yo`wHy%^WU8Zp~bQj$3mrmq~8T{P<54LmeYkGatqB zZk;4U`a;mLXoeSNH#zU?cnpM|v08o&@MAn^8|&D|fGtj6u4w&3E}^9#)y&(E>s@`3 zY_zr#)~{oCZfGNve9Hksr}iH-z+$cQZMUZ+iQ#&r_2JQcYCmEqsQI*nn5~$&1>X|3 z6$PsKn0X`E4po4PyWGyIl3f*zM+RDdK8EkjY+B7{iO3|zKTlUcL9DFY=|za&mDYok ze+UV_$a-+n-}4au`_PA>XSm7x4nGBzVA^xm+9RQk5J8gGZqoWe=t7Ppufi_L{Z=v2 z|J6Uodw3EuzyIL2fdRylP*3~;aWnj_Z$w*WwMexdh=&J*JH*40G|45hcUnOFZT*-a z7=i>DNr;$&OXQj7&Nw3JFsFMI>b$r(G5v8X9xQb$ZYgzZ7%A@45Sg*U1tmAzW-3yn zzc)30{i0!eu{JO8q&@+ zf=yJfp1td3|F^toI}d&WWsu`F7u`jj#*Nr~!CpD8{2-10xtE&r?<7q}+t`R%IUc@0@bi;LAxjvcw4mDIbxjkk%BQCBV`l{w*aBo9$=y^xED zrrwN-WoON+j4$cG3J32i=h$tUzxr`~71;koHEVYK$Jtp8U$c>Zu*to41IX(;{~I?8mv*BC2*w|ff`_ItnNsJ0jeP40|AyFsRb>o>po16OJz>;1M+#mZrnn&^rpYQ>}=z{6GfdA z4AA(bP8N&ClNzAK@Jub2@Ei~u&VrxN;jyCtEs_iA!b3A zIKOyLMTCHt=9H9(H!quYxB|_`^+lzPoVtTk&S>>Rz$9*|)?YA1k1X6W2dQy#9tlof z%Xz>6uiWN*fDpGisjM6+uWIT~!N6W`O)>tdlLfF=vs6~;Fl#}|pC}tpK9SlZxEO;J z3MjMkBVk(#x)V-mB+)7ex7Iq7V|5+XDr%m_q^?8ahLqB(sswE8MX1Onen#2WXg{LC zYLhbUVCzlCK}W4$c0!3dn+bRqzhC7wPp1@^mRMrMX9@mcII0qYgu_RPaVn_cCtN`| zr7hOljouw&ve56zSTxl#RJkJ0{?)`BO4o%vSa%tOd-cg#KohLIgBGR3hX*1Y39W=I z)Sgv;4JC-Icm)+5yGK!*bel%v+2>eiN{2u8GL$V&3ugGUH(IT~Vc?X4=Ibil) zzav~UX(P^2HlaDCrDCseobkAPcRM_c$l7ooCao{iD!U;0Bgp9x>4J}UYzWAFVXUiUE z^uE+o*0vkJBi;?Z_^cM8PnB=r=ZIYnR1gGIM`n59pK-92PwU@ag&Skl_Oh+W-M{GcFEPb5OvV4+iEqe8_y~{ELT762iK3pJ0QqhB ztzmvX!3P-nt9r7_wkme(ot=u;b2wW~Yq*j!Q{@q#UKaW&3h)rkKaRJ=hfVsIQMriw zzY=U4C&aKirUw7I(|^#EQQxXYCC_AP2IVW&M+DaR;c%+HL{Q&UC4`lbP0v*R4^4vA z@?T8er#0rJq#`!z(~gecoDezqzSgFMv~vSBAOs zv-wCl$CPd5<>T;cS^m4B5IYGkJKpD}zk*8K@b_IIhJOkCueENvA{=QVy2-a?pka6N z@>Fw11YKNhdU7wR$#PPdU)3;5i6hhfCs8`qwbWz_(W+rD*UGUAB>2HF5Y3cM&G9P@%2leR>r1tiYfI4Oj zGUban`fu^toBk--%hK8ZV%iixoU0MIv(s+-4dupP3;9AZcZc0}E6=3G_l5j>d6g{Z z1Nv{L;|&+0Se(*=E$q|o3k|2BQ1r(whe8|xObY{2hzM1YRmIAN|LV@AUygdH1%l{r zGc;9+%W<%hBk$@?vsiYOp8kRWaoVz%S_bO>yIP2(F7I+YZx@Y;#@iaXWYvFF4qWK& zqlvE&wH>S4i#d8PnRB7LJnMCch1~R`@dNn{uOK_25N#*m)1e6s2u(@Mse$knNvXMDcl>Dt*Im6)KE|;;1@em2qQ$0 zSEh=@@>cPsl{w2B#j!bF<*C6MFfTqOtKkeW7Mu@&=Nc6FZP^R6njw<;2m2sz?8ch$ z6SGy+H>lq{N*+Zy@&j1a7dSA>ANOTda`O6wg zF>iFoOotfV3oDjQ7Nh%~7~PB0jP8WKZx7O|L3XZTmPWj)yf?$|7Q^5c`aj)6OwKN# zt*E~jfyy=YPIrSEqwx&@)5rPsUo_%!@`nIIFo|jZBQrmP{;7lf@SEa?na|``_y#WF z=>2s-q{xIR`fKacBI)-Z4_M&m!8L!B)620YfcfGl^By*w=I^qwy01H_2j5G>9&Mt zW~1)8YA;swIyK6d8#mL*x7j%>G&S)97D9)O+6g-*cbC~ZuOFYhnWQLCL&_p?)Hf>Y zo=|z`jl`G&;)N(q%2&V8AHej4)0^(2P8wR*NL!DN=h6nF zr^pMd%=M9?ySPf8&0>oD8gWXUI$yh?NGCd*OoUW1nK*Wcyu+A8F+BP((W(QJB8kRQ zF7bo-wXW{4n$Ll9%lZ9FVsBG99k#)1r=fIO5Dt!1*uLdJyuIM|{=@Eube=?`L|vvE zZ^F3+nYRl{t+fj#i|KE^SS9bYRy;O}lD+0Y8it2?0fwM2WL=3PFcv>FEapwRQ-D+R zZ~;R>ypX81qao z{YRe-y3kJhq%BYuqbfi|Vdni`pP^^Yv$;n=>Yx3xN}@xKx6-H%0KZz6h(d9wVv74v zTnE8W(xSYcCqTA{>q^;8g=9hjfXFF(qwl>gPV{|$-k*c(yI(|Aq_NV=Td6xZwr#(l z1Q}^pDrLr(lwvji*}M;cK!RUIVoi}Yzubd~`^ESA|E=bOC#b|ZbZWbQ{!RL@K3B?V zu`21t>hxcue^1wGB77IhLu=iWC?@FbT%mgfV{@(lYB7b^U5Fdog%g^0 z!t!nqGoo>WCBD#jUCzf(Rp95fqy&S(F8Yod zQv%9eWY-_9)EZA(X8p;uH7%l~+M1S7(rvAf-lax%KJJ_BbLe#G&79OJB_-_Dwr4M#z?|L1trk)E$rOn2 z0Dwu|<~~r=s0S|sA4zi-IbQ-dSo}(XR)Z+)L$_!t9s>Bm>boIWeeX+!*9_ub29zhG zy>hg~I>1&bXAnw}MSvPKR}U;=N@I13BAmu6lvj^P@P<{iwC#)Xsx+m%+L3~*laue! zrg^Id^?O#!YrF~IspH1CQYX{D&t#;5%4o6r&|*c(-;?%A6-%3?s;riu@iqD`K&_(u zW2@!gc#L@eC?!^@S$3U9wlh&;-9|!sXf>!#9aKiOEr>B(oX&W6QKPb$QLLL)bgf2l zQ4GM=z!Q`HGPOrKGs0kvn-~i`MqEk+&`A_%L8vlwfFvTr|Sd)&{%;*kgH0XN< z1Wp0`GwC|rEA#L(O~2QYQpVmz@xWr5CUD2}Z_N-HT5~V2$e&irrU*k?D=P|++%45b zFh$9Wx$jXiDpF)ff63<$ia?9n?(jG4!{XW}e%>Hf{y(nd$*&WJZ#c3%!5eV%S}Nai zD2y%{DyG`+os6^Ko>U`uVeQEma~OFEVmEy)2Smn53BAjJo+7WlW#rDPe+ zES?rpE)%xs@H6Peys_4^+WWhWVf8nCc2HB6xOXz&E57x=8B!GJ&k}7~-3V6O@_pX2 zm@Z;LYpxoaV~uzr$V$t&A#b(9OaBHN1V7<~{j0S8re6A6UQ_oC`&FO_c4YhnyA^z$ zDkZ(Dj4*pYOlBkf(~!37s`y!ki>URlB*+YFPRv^;jP(6K1@mYM^UOIr;+kt>UfW(K zAJAXI@YD~ToVj`sw=P&WOBjGr>pw%maIp0utF>S2EJJ}bDoVqmKUYjd?8kZ?#Pj1> zWN3>2#nXeATF%mZiq)K8@C`GcB5MNi^`C(Ac8R$ogb5jvA(c!V~ z;(N0NF`PK`{oBy}3at;)o);Ybp|mJN$B-F2YH5J{FA(|XIt9?ARmOZ254?W~_ATmB zoQ@c_D7YK7n_<|A5oUP+1`J7ISmzGzX0RSyZ`OkafWZR73B~H(h}G?Pyvtu7GPIS6 zM;;J?uFQGlZV_w^e`>hTF>3+`7N*9!AX!0%%y3&R7nuBFFgkAZ(?gy*@C?DI&^@?b z9X7*`PR4(wh0lS+3ilxEf~ijHgsL}d$7wIHI%B+RwaBT+EEXFo6ocqZ9=$596$?^p zMf|`Rfv(lEU1KIVHw>?iP)5)EzF%+D!teVNUt|J!E?^5**Eq9b&O&3Yh2d38}ZMbG0zM}O844(pLRXVE^591wdaOo1?8aYq{Ui^)sH~rGwl}NJ&dvp|g)`n}XMaJ8TN}bB99F7!}z2 z+c7&IW>vteVP*w3c9Vf!fwx|z+ig<&%7Vdac`Q@>mQ3+){XZ0+KfL(0nc_P$#c%%~ z6rV>BRT&XrIDhq#VeKy%Uco1@QkGG*<50V%|mSuUoebL-3xHD!O@Bzhplhoyjc6pvNNz1 zUHXslkF%{{8|>qp`u`*6g&%Fuesuolbj6=YuNI_U=^DasWA>Jke!|D$N;w;6GkL0A zjelZ&QK3~#Ur~`}PQUD0g_X?+-k`kjiyW zLvB!7-#SH6Z#P3sF2>q)6hF`k1{<%sA?N9Gj+E2%b~~6XHFBf5qTJ%j$TSz-72I%G z6gLEzWoVH1=V*Ey&!~&(AO&7gzhjHvMqSrKX4M`MA*XG zCmUV|1ooN%c%Q6i@8z-Ey5*||cSP@CfkvtYk(}mH=9+1jmZXMV>%}j~Eb=ud8y_Dq zWgSsj2YBqUZrP(&WbBa>t4E4V<*Xj1i(8QDq$%vROkuwa3JV(6Kcr#5rZ5!&B~cMv zGDX})Qp0OBWqmPs{^b-w4;hS^`GX^|>Jvi&ocxucSomet1|3vwTr#yC)!;YaR#lsc zyWGflDfD^(1;uG7C=Q?iQMR27h_b9GS?;Zx*W@2jC7AUkL(SN;d7o2fpL4EzW`bs( zVTMWX$oK#A6>fC;Y)}2S9j_vvGefQpyQewsj9kZ?ym#r>(fP-`qL*{|ploL!-hd>y zlP8#KQ@5gqI|*#131sd5hbs4{P&uTo;W=m6UMil7@2?8ZXXDUu<59P*87=qi6pXh= za~Vyt9<0RTBpXu+9u?R>SwP z3K*%<8FJc`)o?y9Mg$GaYB-UHuu_4=blq^9UklpoaIxFu7wc~r14-J-e35!ekb34| z>OD%uodkR#{U9tFoa~sv^jked=NqSz4k{J@tLBoq6JWT=$p>(0lvvgA3`@y$;H_cn6^T&gui485{E6yM%KSXIP zG%0H+Rq~%T40u9gFEV4$+h5O1P-QPvO2Zz!{7ot+(`H^MgTE^E62LGxZC?I_mn>kL zVqQE$N1fOG+Nzf1UrSoWuHGn0h&^|Htw2|Hu9xrEhFw#*NFe zn1Kam$!p{lH-Vy_n?QwQV8eEw<|ONg`(y+qa-kLu_P4Z4Qq}T${i)Wv<>uwKU5eE1 zMT!XoJS%@-o4;)jXRgN&f5uv&W81vT-@reB19(x<6?=LA#Kl3s>Exg+DyA$>?s^dU zGUZ@e3InWN*AQRE5FK0?X6HY$9cmi~oS6iGkN(}lUqewzr&ma?w&p+a_OB8g(|i-GG6w6)gH zpDRMsW+=K4So@%8uL?Pi5KUHO>OUg$_)7~RNjR{JB)!YUZd*+I{lARhjY>|SZCP3^ zKb}%LWk2?L1mq}7#zl$AyClFLXY?>vB8ACG%3AR(cUumtni}mT6nfKh#k6dtPFWuSGt$7tbfq72s@R%y1K1$9 zgC9CxSsUb89%BoZ@2wT{Q4Hy@YZ!W76jNI9W{RkwcPeTcBvn&7CE|W)yC0?HiR<3E z$4+@4pv8{(Wm{d}?*GtzK~WTTk1|gG*-IxJD_cLBF)#9U%+2_q`~`O#TVSwQQX2?{ zIZlHna2`=juDd;!n7r9ZOzxCF@?#pZfPb^g4I2mgo0kN&8;?%*hqvS`x*k&uSBS~eM?3;V}JZrk0|sU<|`bRUwV2ggG8Yo8nsF@VP&kA;`v@1W6uDywQP zrfROAXg}{v`(I*Xh|$n;w3itfcZ((;ro2D3J|h8~{mc!YiMa3xv1Sz{1J|f12&SE2LqW-ek2d7y@$+`)|`863WKhZae;t&gzLU`~W3R zpNRq}&kLX=l~iDSQ~&vB9l;o%jV1DWV{RVSaRKC-%st^=zSCw$1Yfc_OHV=B8{=Rv zq}Jnk8RKQGwetIh8U%Oe3Mt|x9|}@ z{d;d1rOzKOt3}uWY@(mIDqiHat(n)-q7z3MPiCP*SRB=fn{AAfyc_=wfBHSf- z$;%Jr<)`4opzYgbn+Ew)JFz;~aJs=oa;(#I@Gh!ocs=T^GMF|(zvjqZ)`vtk6RP4O z2@@nG5^59<>Pc%9PmGo%MGOrZwh#t^-GI&3%5TwAGk%(-Qvbu*Sb=gB48a~G&9YJ# zHy1ThD>vztx;R*=kx$x47`D|0EJQ-dUBF}f@C0B?>#T^ZGlr|R;wCmKlRw~xNlPw; z;bh7A?gM7Yxt@#NHjDgz6Pl9bJ>(*ez0TP(npA?E;1fMNyk0h3G2GwSCX6LoTe-0I z#uBSmac4igjCxoBw%M(h4cG+ZvK6sBu}Zn4ZB41an42AQE18>B`kW^x(WuX3ZdOmz zc1qA+5I`s+j}GH!;%`fJeLuOxplB4}v14vmmHV`qf>nA^*I8Xh7@iGA)9zh3Fw>h= zntzE$gk&u?cu|D$Yd4r2ad$;ZHnQ-OP}=vI^nTTbe8uU&+@mKyHWlozpG0IOwDhuP zy{a~pg$v4!FJja!vn@UpdB23$eH#M#f_GDxZqCP2Ov}hBx41Gm4^=%W*~4m11bYtHoHIJ}Esc^J)WMx(E%q0F1)eTjbQ3xDtax zyMm_*p17^y)(LL0Rh+SaR|uMHK=;xTtGe(4#;16B_8K>Gr*{o z`dFLw5AUKDe5SMgYelxpRawaG+~Af8Xqq3~GA2!H%p#cc z;@$+emz9ixT|@P8G4KZ`{PU_YqKn2K5{PEif4M4AGa2LB(9+U`O-yRSudnUIjrLGZ zlM0D8wHuQ{EZR3EXWpA)hXVPACXu7>rS$lunVFk2JrA>RYb_^rJrfCS=y)TCSio#HJ30SQ7|W@f zfTvr&bxA+g-PXkiupI(st+kuC9EpTF2yjJVIE6YnGxNpOitOamJBay~0YAb*l(>9S zwbznGd(BbUuPTRNR=NGZ%VfwU!_Xu$3)iyAunKU-SK)j zlJniXNN7*T?wqR79=rc#IZbuE!Rzk>I?odb{$vKXcIA7LI`TvmwHE{Jl^VbGCSQ zel)bhjt>kp{FzoxvOOdZneEzJKHhS`TY%-3?fzxy_r;zRYEQQm*IYw?V(uZhebV^eR|WZoQ~ zdLu zyY)}}YDLS8Pok-vSBYEIBK#mUE|G+*W_0YH(6Q^d(Y=XV&Cqo0%InxYHZr=CTpAfA z+{M-I*mZozZYxO8a45kHLdUKXI(DBJBxnqjppNpzNgcaSCgDOa{4_62iu#I+9&aI0 zwaTj&CtUTcWB2%uSI3RsJi3>#KF88WiK^k*$C6Y}NT3S*7*9$3AdKSAF7H}W&6~;G zmv>vs6+ktC4taV7`)kv2@QP2b4YNAhQ!7f{9IILJzY=k+KYW1XXl^+o5bHy;5?n>3 zxQi?l^J#n`2++7_qSY`KXj>z#1+b4&p5uV>n&bU+6h)CeGv0XTjH?d#6=`Ry$j_@w z5AaT`hn`d4=QeDsPOQ=z7;(3gtSYpI*KLfq=ThygF_yEY3f_iXi%3hA3MUX7Gsu{r@HI+~cFFuD+j1CK5Dwf}%}ZTGKYx@HASe*ph-zb6^tAzyzWq##Srs zScKLK){J7+keG?)^l*T-*oU^Z+S^mx+Q-&fL@Jta3t+8Ws)BgITYJWUg0>J4$ou{6 zGm{HypFaKP&F7Oj=j{7ld+oK?UVH7eVv!;3Hb#eX(D2`6aiH*o_szY6GKIr@bjAzX zRcpc>N<34F3) zlChKp?$jl#$0Z^iiK?8h!ixSQey25T@Llixlga%~?vzM`3-%vGD4Dq;LfbcMn zN;2A<@JwH@cR!{BR8QoOu4zx?;UeA4l4zWDD0TvJ6O*ZNP{a}SHcGFd5e{8(gG4sIZ3UdW#yDPgMQMeTMxrsS&J-Tm8K zd-1|INJGQ$W3A@k0Yd^UOJJt-$7_4`6%z^=KS{%;))SJ-e`^g2luk=$17FsCEziP* za@!ar&y*mGFw|-Q{)v4qgTo^+)Cy&$k2t=otih*9?YOO~28$r`OoCR`ze2r%`jmZv z{i5T!N|Bk7h~%l^j6a*s)aiJQhH-ldCnAR;a@noG$sSYSXia*jo1Z$)ZY?|N;e>Af zS+<9##QA3+9BBHelno`#Zz{DTsGD#uTD0K9_|L5v(=qJ(wfsN(=n4GYcaaryO4q&5dA2y_r2K>p1>~ju0m8D-bRaE4*bU!5m|QOK;r12<&30=t+`-QaZG7al6(iBJbaBfEIhpVKvIboN=6 zeU@gQCE>Gmg`WJ8>$l+>HbN@())krx>6$doe6@Dy!5=Au@J;1AdhME2uZO{1b9`Bi zRQZ(n&lzriSb~SW;%CGM|Ap>)<~((ON&k6f+-sN@s3d7G#*xM4;N;F->&9eg6?&V4GFB}V9y}+ImbI8cwbxy z_X)?PthW7)rxM1lp$M)Q7xKYS#YV0x>YsOCln=y^p5W}4B{F!`VTb(y=SLiRK09bW z^f~I~n13_vV?KJB=~>ilRlxc*Tfg`MIx!EWBFo?jrN25Nmj_T|uj6hOds@d&;%87O<6P$sxt@Be?%lhJLa zDTC~BXQven{|PZ(1QP4rSma$>3?4P?UtN%jwX*EDeUHdQ@(u2|kJ*#3?h6oV0rQVz zqWPojPhNw7hJtA!|2TF;>`2xp~1K z;eDJWZsY#EGRn7ufsEj34Hs(%>gi_A!8C!(^~WHrDNgnbl3g~JYH1lJca3ValiV9m zu7yVl_@a4aTZ3V{D$792C3gl8c~O4W%ADQIm(+{Xo8r1 zieXc|UaMW1-Tc|!RC206;&^v&_b?1FM)oEmo0`#-orZ_zn>l0aX1B_Y_wC-)pKDwy z4y8DfuI*rj7i`vZXa@0~j~;A}@U?X;_-y8H^r>%uz=>La*47PC+npQ@{wrHTni8_P zX&jCHnQ63>eAu*h%pO@yuFTO2ROx0fsR2K}E~%rah%B-QQg!|%XF`b(i$z{{u)Qct zi~K|jY;Sr+&D@TUwb1ps8@p^CkxsZsbcG^1-`Pau2o4+~veS+1WU`-*HKC%M%0lF?mAr;TOFJ56`C^Z<-@!t@v8_SJ5lZWl#XGO`*@p~fx(BOThQ zgc9lOphr5|dPCXi9Jj|kU`@vcT!;?XhT%Z=S+Y4Czb@lx-4_BF&tGv&5XuVS!t%R` zNRU9wotkY>kTweiRo4=Q6W_s;^0xE9>~>^JA_5^@nAOu>8cKm9ov^!-(k?XC+#TI% zUuvx1xm_`CeN`fYu@*_oR6`gJWhhpM9ze?HX(->)I)HdD9OLXa!li7J!uaaGZ@=;c zz28l{)O=CzY#vA9>UZ|LUf&&jC;YKz>)muYEU!V|_n5d!6Su*HlMS0Xz>??3%G8%}1qW}H()MUf56 zfy$b>+m#M%e*hi-TK`Ti66EK{y~|3i`!K~f z_{si4j$HEd=WbQUac0+f@T3}y@iW28{H4Pc)p_V7Hb)WI)7&J(;8ZhtBVl(qbGR7? z?vO0;Fq)G4A$sU@sp-t#?5wZEz98p{2mo)+&d4!XV|+NAw#j=9K{H%RICnXzh_J4) zxb(<1n#yt_N8;{b)+mSL%YvU7cqIz%4W|cfGHEc1WhNxy;lyNv5_kLkiHEoYi5n5s zZrPB*At9z6R}nl2C~~Bsmr5=zF@R+VN1OI?h!@<0GBgqkzj*dl~wo)UzVyPULyJ>QHJ;$TPI8 z?VMJ`6;5kFg}6C%HaMQc+s+sBV{>;1w+SxB z9Qfo)^0qbJdZvM?F8 zBPaUlB7?!q~Fld19*$q}F7{QVeGYHcvdU@5&^Br=-WCiI~ip?g}tpxl3ixojX54n zgTy%VUDQk&I^O`dzN#%Mm(!BYn5|`s;PQ2l@4*U z^%!3R?*KqwfWTu^cQda6?40~Agbh$g_~?91Dpvoz0(JcDq&?1MI%OGqHl() zStMJZ^b_vVT4eay9FPQ|IhYo-Bp(Dm*XJ6L@V;h1G|lH2Loj=HSV5v)q1#olmyx z7J9+eNRI}a~AWwY|BkA#`P(R!f-9b>$SkP$4a zhVA^VqW!{GUI$owmY7CUgg#37=v`{8L$W3PxT;^sb$+RElm(v}rww+xyh8oxQsH@- z@!$yN|Ap``hwXe!nJzM!R47Y|N$(yf1g^*wlL7HY|M(B|S2alNWXu3a?6gP?uG-R= zGV>$&g7^;V`zdt*m+QO}nS-lE{8Pp6QSph$8+DNvTaQpYZHJf^v7p-Q?J1#h zOOL(fD8-c0ljPNvlu}AzP1j@YUG%fRy!*K%@owb-2bDt+W!VDCC_d(Y9bXa@-PWPv z&M?J6Z~Dvo^1GEsDWlmJTWQ&Mqp_4+n8=1r>5ZF*_OHF#5zS9GA=P?y|-cS$HK{5h;l!6c5y zYfIeCTY9YfIu*7-cvUc|EKxAEH0IV;xYOXVYMCLEP_da-D)GwYXLUy9PuzFbr%N9q$4XX5}^hh;KUXOedGYAaLe@fjHwmh+k;g zZFpeGdLM&ZSO%`gAOm;vtV_Pwcm}imx4b)k7?<$FI6Mp)m~F=T9m6)#kTI2%BV$Ip zCyNh$qX;7YtKSUn2FAG}-F@;sq@^zrY)9>l?yrb>ACyeLEl@kya;hDWJv9qBCz4;Q zaFUq&PXK-N{x;a|)7V$DJKs1h#;z>#w9va3XtU@&9*gu)^yqADb_AbV`w|7$m4w(I zGtw%I+)y%RkKJwuUrnKWET^x~6P$lG_>0uWU0oM>y)JS{qMH}BPgO43lj{jh8eQXG zSl;U$eV^HImuZ0mARG(^U;F=A&s6yB6(9K9W8TV%IFgd zz?<2kZdFm){v3@T(;uly%#%Z-X;89p2+#!k7{J%~Cz4l|&xi9r%4SJ}A*xw$(`b%_ znoi5nk6pn>ReqMf9jJ?B41F^r|3Xm9OnRt{t{ZIR@F25^#a;9a>Q_%Sst(nZe92f; zg=E$3q^H)W?9RUujsRmdlLcdfl}iBq5+Y-MWg8D|m(@(hc7AV@4`qkA<@80c9+;&^ zw{l;|sGmT8|DpDweDY#OdWwVAqk;T%%kDYqZa6=lgpqEX+_n|n8yMiZ#iQ1zy^$Uw54&A$y$jxNri=<7G-VjC zwmnT8^EWcX!#Q&$UiDCehtHY=4qX}C8`7yqW8T?L@^ScUtL^h@V`QTd=LW^UQiIvT zuD8-_6u~s820#KP=Tr{s6Fee}+e`2YnzPbY0)KBVmkAcbX3nFs3Z{~>mIXI4$r&Jt zCu06(tRojj(0WH_6*9&wu(!NzZ#mRg)(jPaOpm!JoBR^vK#waD;CQt@FOeEiSy4!6rd0iy=V5N{f>q z`!XIBIT|QXs?2hl?weu+168A*%OafVc?$(~Uy9eLf)KR7yC(-)4E2&iU==qN7KjiG zz9R&y*i9A5##AMemJWob7qm+ai~pz@SqS3`!5M%+HmjaEE0Q;Onmi>Qn3zIRWV-ax zr7?p63$-J8mgt+sGOcIc1z@X{mKiM%eUsFe(Fef#+Qs9%^I$aMI_`o}uC{SUi&9QJd5NXEEdADQYGmv#>aAEhSH{0-)6+pR?5DuH zHsn1~_>0yXM-wuZkb4TOHY}Kfnda!q@k3czu(lFz+pr<;eGb}%#bw$Ze<{R~Z@sEz zlr5*)2)c>9=)TYf5=ozUGtcY+Pr|(pTus)G+1PyU1p35;xvA9gP>S@vR#NLv_&G`Q z;7j57upJ5hHU_QF9~G-FKLhYgnlJ9B95^=@{O7gR8#8{^3* z;*mcq$NYHYNv>U5i*(PUH7Ka{N4%g4|lblo;_lwVB`>%54hO}A-;!+P_EzQ*V<)HBds1$8ADv=4ejcl6|+~R5Q zizQc!M;?zMkGwK<4@7HToJCWjEbBgKlM{iAA(_OMQd+y6{ga~6#!ES*XoN&x2)vMB ze1R)VtOrxa!Ihb=qQT_os!EiDq zT_C2IwWr!pJ;!}smqjMkYXM|DUn-!1WtyuAHI}U>Md{CIo+?1An*JcPd@Tt-L;k z8sCxmPhitG0G5nv^`{npV;1^ccIc@YyWp=kGH_hjtscyex9(;i0QuH+1`qJ^o{$0d$5WkEtkL3 zEw1w_0v8F~c!0r7o>$>rTxqW;A{cdf*u_|66FR}LT8YR@MkO)E$W4%$T}iftuIPvr zVOu(K2!k1s)Xo?>r`COI_}>W&9*aEIxvQY_<$Q#G%dEEhm8ZZi!S4c6r*+OFQm)hA zO4Z20_ImZ7yAf=2SW!}F4R5DWaIbc$J@+Z4G>UoX}v)j6~y{_DI|vi#&;>Tk`MN+$}~79@!8|zH9x5Pcg?hy*jP6 zJ9|&E{d*Y}4z1=sreodCBPT`n`43d-@OI2b=tU)1R>@s|Yx-j}YN(SuD6%^4(Zh)D z;z>>>p~A+)6B~*08h$Eba2GZ&fg(6H+gMkSC*zjv1DZz=v}$ z9clbHz^X(AbFV#WGx?;v{v;<`F?V(6OGUBB>dr$YI$UA`3LWjL8RbO_I_&*;FiW2g zBp_J0Z$be|Q{Q+63BGeWY`@?{T!qaovf`%lIQ8PWjdYnhMl?zS8yX`|$GjpgN`XDfF-_pzvj zh##LNeXPaS79inP^AA=xv=ZBhh}wTK*i~;eZ5} zJ6UQtKw#64tEpIIBc6_JccbmT087cmhra@b*X%YL^+xd1$Z0Ht>8M?zg-ZqnW zb+iTm;QHWrdhH$WZa|0pTm$zPpeBniS16!DEANTie1N}KP~6=_Bk=Miz}6*q*16Bs z6`)mAS8ydx?#2Vv#-ci8664~LO}etIv!iBOf!^f|TN=qxn=U2_IfaE}EFUp3e9o8{ z;f3A6sMWUn6g3>+e?v_KBd&ke$ans=h>!4)QJK+8)u}L$+6=L>AwLpg3oUf!C|e$p zsx=Edg8~?}0xOKcBMrB9$9R73p((>v$VqkD1-@mPgG0m)dlYJ~k{tlyuyE zOV|cAQp+?1Gqv(3)!<#g4sfbe?8^8TwX6t+hvhqzwcWapvnCr85~#86$9y>^%)f}w zzttFp!X6YiP1jqujbtc;KWz^ig{z<%P!cOa_jSD$Lm?F_QePaDd>6nAen@g9jbaMt z9VvdN6gR2BNkvLjglAlwgjVd#Hh}w@Yx)~-{Y}AileU;-MI_q@JYoV$wK5k|e8Ywa zXY^Q~YIq{Dnk}C-Vx#r>jg3|f`lkd~pWmrV;*W)zukwd<)}K*O?Y#c{;2%$i?JO}& zSLQS^nMR%r$vlYlB z26>bwOdTdH3sR<7rhu+Y8;w3Gqtw%?b6@&~lp8N%dl0G|aOJ+F@JRw4|Mwk?2fjG4YS{92TN`dRL)v|!zUR{1l0xy8cU6&=nz+#Mh8vo)N!(d;jr#hR|v|# zyp121?>>bn<8kp@!5>M&)$g-9Za9}QT;2VkxcvG)Tn+KmDKz{r5F5=FkVge5BKQS& z(uQy=LGE4XFYjUm*9LVT#>AFwU5x(q=R3@mshoVjRd?9fbI^76bzRx5B2A}I!Hf%9 zg$H2I^;HS^@9xWg?Z1_OXJ7s?|5pCT`ttA7oBBTR0>nW6IN`@f za(5H==r)&SI%KP{IzLghfeSXtL-;Z8V7}rGdZT%q`R06moxYO?H|0D37JUT%G|yak zWGT+aRS%o6VjJF~$K5-{AMv>w>%j<2#wDlZ$zyAbYc;lOBWvV7=uo{@BlsJ&-R3$q z3=}(q1t`~G1jM~~7Otd6PB5XJZ=Xua zAoOuG+VMWL_)g90b2r=&;XDPO%um7RkDHPl+s@{=l)fz{!YQ~GV#Eg2Sz?Pz>UgsWE0hCpS>veYrJEv{ChOWb- zQwq)Tuz&@oKOfqDJ678P@bZ!%~D_YW{Qu4*QKm#xp1#~JM|ZC((WpO_YiOf zfs*zQ#1Aywx3is4_qh;WifNWO_QwEO0)Ai~o{7qIHUbH$XKdgs*=u(hcoF0%$Vhs~ zisPgI$wgF~h(}l-_*8pgKuF?#)ds;G zjEYB6rSV7&Z3UNjp|Ny;mlB>6?4fN90$s~mA?RQnUVfrXsDegNHLkN^yL^>i3`o!ZX)-RXxjX+qzVzEq$HtO0QsF`YoUM#01@yyCym;c;Kkk>fIIK;JZq<-IR(kkQHUNTKnYelX^uz0AQT0=*H< zY-M@WcfOquQj8cLLz|E*M#z((?>kZ=AFzYVM;^!L@n5HKYxx=+nveXV^(aowIZ%^3 zWwx1#$d0NtR^kw}9#>sW-1uwlJ(0HGNn5#07D<~o9U9)Pp1Yf9p=q1+5I`kq!8_jV_XCwH!EL-sQ)1Pief z;-5RGQ2<|ubpB>RWR`nxsI|U)#1O~hNEgs0{OCn`7XsmFRmtYzLlrjv!G<#H(GeH1 zxHdOa&!fFVDD^4Cyt6xBx9kJYV9kII@2^QqN;K9_aa*tk)#25A&3BUfk?W8_8=g7V zbiC6)oQIc&6m(Afj{>Z~mPoz@4xSiyH!~>;<0w^t zpb2yw?E>4bVHMWNwzrXns{N) z>2V&RC)qY*T;AinZJ)Jx59yEq(78`arLObUA=CWC<9P{WX^=up{DazKuV;XYN7<2m zFdB)-MnGrX(a9Qc^NH2gkJd9fR=SgNs__?^7OFYknJ*%F)Ljs@qt<%x@~iUVkw2-x zadNcM5V!8zUFWV7AxT8mC90mg#j10^TvX?N6_W|wwtIdLr8ZtbiH+~0ZQn7ag{StE zRy>VXFx`;<#UmRM5zw1>H#y&R+Lb{n61zOmE=VB$42edIP7x@a7HU4;ZI;9^#nH! z2bN*5s3(4h37kzJdLC9<@_$_{(RB1DMVJ`|Xv@qj_KUx*>1$U#&*ujB;pk>kS&JoP z*Bmm$ILW!_oneKvP*bdi(>%X;vQmfuNJ3`lVf5Sn1#q(Gte&S?s;lgj{!$cmUL*O3sCZculw0aqEeIg|E20Q(cS^6~=C~Y4Aw_pk+ZveoE9kVq!hd_>- zekKEQ6H7BUage(L(B*aS&5qYG{M|jwSZ2@uD=EwS&^6!U;h)>im*J05d|6uFLy~?T z`QGxo1y-2kxHpr%;+Y>LvG7G6cVt|^tF6Xa$}jf-hBa@wOfetW*)wxtFz;`Ux+0~7kX z)E;DAnT=H+@3tbEqyydx809k3>PT;N5MaY0<{m`ZA3V^!-1d@t+Y+8bXOzz{$G|ud zaZ-0Pz;ISn*R0=J%?ZrfIab?OAs>dcBaxY*X3fw1LOholk7Mw4g|LkM2s_Z+R^&>U zMV;^r-k*Uw;r=Y-Ivgk2ycZmZc@IYEgSInWZPgSe@-6_4cKjMZmK8IN%WfsA&Q_Xai;UxW=p1*3>_xD96Hw430{B6p*uNizpgbJc~V)*{IWwU?--;+m4UpQ?6O zi4{(`HF+!Y)HN~o?uF?-cb?kP@n-)By{ z@5yg0X3aQtwp;u@j^Oj}i8Kyj1wOSs`o6eVR~Gj!1V!{@li-^73f@N(23Y_#bfCkA z*zAhYFJeauA;hJ0n>0G}I>{x6X#z&~bnEp(%%H*Lv$_EZ?+(*;x281c2HBS| z8#MBRW<{|=4?qhFFQrl1G_!Pd zXymvC;xl*&7kgHJl4?eB>=F*atC6UWa|*5-{Z2H#H$-EvaI0tf2MO|iAaaIGJB4kv z!tWD~!iJF=p!t2Uw*)Hb6($#AI&KV_&bv?vWSt;*JJO&zIT&X3Z@pGcRCZ|NnDCtH z_2hHR?<_;z^E)C2v4VxhQ~+goZN&z?5It!2GaTXUe+|=%?wam}?>b)_;J=x#6#)GSIXRerPndp7tNt`XjC71*yq z-QrYp#IK5TT{Y(_Qcu`RoAsynp77PYYd5Yxf*tbdPf4`D*v5PCnU%s?7)~{x2r-_D z;8hz9{V7Y&znfR3_a(|a7Dj~dEIRGs@Ov$8;{JWkx32BC~DaS95r zb3r@ryXv#!f3F=zMqPlO6&`Fi>vG>VsZXk+mwBWIC`f6{3t6i9xLh9@45UEE(9ho& z)T9M*7;4eV24|UME^|W?Io6O!sAHTPdA+@jCnUxr*SGvua??e8GTn?%7ERf=koG-+gSIqcWBMV2pR|NznrWSAiRZ!(O5WQFGVWdc0JvNBZM>h-j)3} zGA+J??6(kx#gZN2k>eY0jLYm|kP}03F-Ny^CIruL06??G=0+A#lxFWMglTU)9=O8Q zBy}1#i&NmV?m7|vQ^KKg3%@KXpe%R?y^ka@zqy&}8GjCZcV!+nsk0ka7B70wf+_|I z;nlt2mPv5U5?^>?VX)%{CtOl~xx=l?yZKB+cIkqqfuIO7O1};lG|gDM_nK+s-f5y9%GwHisEAmJx*!_6#bt z^}1WQbt79(2T@<q$AM7Yx5N~yd>Q(yhR zukwcD%{*|3el1U%)@Yw(+Dq%iIkZo%&b5Hr!-cf_wquva?({ns)XWu-mOlD6P`{hI zXQ8lpF6;#tCZA?Ggs926#47@kf97v4V}G+h_;0+2W!L|tS-{-YtfKTQ%eL(zZ0P#nHQK^FHTUz(Qm*B82jv&>RffMXBkS$RAZ&cG zAh-m@;h}ro+cm5#$9={ovj$ipFW4{h>@wvKrfX?k-~G#h{KY_cwd@vl%HDpp?Csa1 zt{{qFjY3q-Z#Y$q4ug8e$u7E^j)xJWk`EnbR`EPVPXzfKD{~4weC-%faSm8SC}8`;(NcjENd)z;JZb~yXy zZaDB7+9U^017}8Ua<{=UvhnJC`!xGN_X_%w=WgjdSU74&>%rr!=^Lb5cc7bJ3NGvH zInDm#=Sb3ds9@A)<9Z%9jn?$lEBArhRhzB4&DtdNR&}~}NaAbNp;+`%5t>_VQ9ik% zX1YP0t7HD{LJ_}y0chmFf(_Am*_f?p<~9v&?fIN-Oi%U{&6hFNAucqP9HEP(zv zJIJj^v7%{E!&>wL!l#VXjvRBJsNVQ*x6b~zgeYmuA|#Jmg3 z;4?Sm&qaHmckR(s0)oR?$)*|Wf>Eh_vg#UBF74A9|0oZ?3KHGDbf*uKX z*O;x{CkZa)S@Th-(q3enT{y5f2>;y{sG~C_N`qEt; znL?5stb2kdY@kj1YQ0kUg`+IgzAX92_n>PiDt5rq^#*%An~RFxspg!O*;$B z{H9g7QPyl;FCiW+iPp|`TPKnrxM>%BkMF6{m3+g0bOl$0VJg6QC!q6X*|`u*B~JHq z5RQ~d8Xg|T++1Gn7oQJvzq9k;5O?aXNq+GcI6lY5NpE4y{leefsn7bw(3zX|MmD%p z4|nz)=T3SB9l4$%?xetvK1s!SqxdXvC-umcdIe@GG^HxElvJ3dq{1vE6=o?xajlsg z&};6<@gnIIk3k!(a6JaC-IE(X8&4w5_?<>_MTlKn%_H&}&I$Xm>vqa8r<$SsA&R$@ zAvV~Rc?_h_uJ8US7heQ5@`rt%hrL3lqrv1Kvs;iOSJ}g_Da%|3NsyhgE5N5rDdD1X zC+Xv4K5Q)9f_>oiojhok94g-o#^9?!;r-N9R-3EO{w<#f?K z0=gy^WuGN_cHJuOM1L|+9t@@DVt;I&Xdhn1q2Eyq>%VFJR|mnaF{K{N;LfOQ9-csi z694@TX=a(%U%o)pQ4Wp%hq1H0M^rcxS0+%e4nVnx`d`0-&)Ew*G+4ve%zuOITOZ|`Q%K=JbLYiX{nLwRZK~acm$5G)G4@Nbnp9+(4iVz zaZ6E+d)QDIWV&qDdZQ`1dr`A*`6b%g={=2Os?&Q?mDvt7{DT!|5=An83QzY}N?KD8 za$v4R_-9^qA&YAf-9h|&t(pgMEW6v%QW=g9^vp~k|J;{mgpFNg8vBTTbvibHCv}n& zZfCrIiGv>Qcb2l@I}J(vj8zQFL3PN8i5o#I*a&;*xw*v&wfK|0VWs~(K6 zExU!(p^1Am@KNwm|G{@-DtF0 zd!qN}Hx?Og&sw_LUZEMOEN___?hrd{uMi*<_n_o>VJs%tUfmp6B^d>bo?n;jnC{=4e|*!&5L=y( zGLWH)#`5&iQ?$KL6v#WqXx(J|JDQ@%_2UtvhroS$t=mfp zY1M5q}X53f(K1a(`l+SW-;l@$y5slEiv&v+$!cC~1$C z&qff}KBN3{UaxR`a&{gnGKxWw0+t@Kn_8ycN( zA$bxqW`}(&!8P8c6R>}YivDK{HO<1Qb1n#h3dbn~$wsCwkBM?AXN7^Umryif=kN5&@ko*qe^;VidLqcrM z{F(uo1ou8Ry!R&5IdnAxwT}kco^K{73fsRHj)(SiX3>&7fHG@lysC@mm+JZX@;H8y zWsPTI=jfZ~v0VDY&gTA+z2Yho3)o0~fk$v6ch3{Rj=Q3K!k2ept^yrE0Lge=9&5kZ zj2~PydKKG4P;01&{E8y4Fr9e!fk@u~D#X#RK^X=*Rk>1VXx;uLLSydMNQYYZLuAXX z8%lV+JTi1MkFWfPsoY&n4YPn-=W9j0eVNKZmoM39d9Q?mhxlUZCe~mW*hOqHpL2w8 zpv!x-N?vm^2l)y4X@kCinF$$;20D|xrRQjm+qcHVThVPGm&uysvQKe7~5VS+u@i-j8ksN7VFt)=Yi|3|&L^UY4~8)iB6w zLYF7Gbl1+;xs(uDaDv^!jY_>XeTq^38Dx)9ev*g1;y(!RJbFlAjdvw`cpZ<T$p40YOHa}lVK$5^FUcX#VO(I6KsW~J~Um-Xte7`~s zFl>{irrm2QH!~xwx9#UN&LqhEfPEBDKWmzS`e%69D>N?sbqDu<=N(Yb*ual$*M!+_ zG}-LI*={0R|2P=~XXH3H%rW`ha>NJcm_r>|rXlY6rHnG&dS_?Sx+`k$H&8>K{6BOE zI9z7v`egzHtL1l-Ja-?vZ`_1-M!7dwJE&NP9Oki9_GrPFHP- zigLO{VpzqlFY2ld>!>w#z+hM4mHZw2wUMuf=3le?vHUQ(T?atwtR5H}1gtK0zJ8h? zt&Vj1QP;1uTaNT1>$KfBtlO_*UGOHAvKTMAjaSKbq(q$D>_oO=I9iu4t)aneH;UH^ zqucgl8ra%vS&JDo_BL51zvR=XzyDZDM}B3!^=L{?oND~(Tr~X$S52|rf+kgZk5#j` zZNFAoyXBx-VBLN-pw3n=xiZyb_nqoDU~dH>&|heR@l~^l`voJ4YSOP@4?fw2z73v9 zmPd~(pm(jkC3Fpq!$wslv3D|-4{@j=k-e{Y4=c8K0{ z%dIrL^bLc!NY{*Qd?s;7!1>i*fM1P^co`p9oiAIn?Uu)ytEJ9O=ei``Iu54|WiY&v zz3RY-W`Arw7gnwG1h5*f1IsAiwtlo0f@J{p{r)EY{=ES;^vxWctn^!&ssJi;6)*k$ zXD$w%Y9{^hJnR)0s3RN&mj|mCo3W7Dt#a^T@ipZ0CXE!E_Y0uXHEARj=Vi1i0>pyW zqev?U0C5{>vO~E)1mYk}qR(r=rP$C7LMBGiYKu@FB}I`X3_^R;|3mwcnpNc{TRlh8GZ10 zl{GgDkAbD_AsC=O5Ek->zCwbphxrA{x_(ej7|@UzAt;Y)J$n2gP)_X!W%0iRfb>iy zJ9<)$e+8G1Pt!y``cZ4qr!@{oCt8csgxD>ILsWVOikAiN7vcN|ffqdeQ(iN(4pc24 zj;h!3c1v%Vt&MDgvB0~in2aH^UjVYNMd4PMPNoU@F@NTB3GdwUIgz|aMAf=S_s`11b#J+%rJo61!(2$-#R8*Zq=q-O0eeFP5-%9_dMhWigp`%PEGo%?<#r92O;1`3C%E7RxRiP)3tZZl%u(s>Q?nQ~L6U^EdyP_N)aancveH zvYZ-bdEYTvp6~{D;oGz{Blie>$daKAS!CG^0t`Zy0cbL`4^6&LhCVcTfGmU2q(+vh zz!bY>Q(iOUJwo`h2Yh+uE8vTGm&_3Z#|wZX^Y-ZhFc?mUFb+rr1A6sMrBS1=1Xe)i-xowJ&yU=WwRGB z#5gvvyta3g2Z6!|dJ=DJkh{$xxkGKB&CJH*)G{-N{)ff>pEqRou)C^FOMY-r9c%_V zd0G5s&l}SoH5~fCy=*Yun0v6&&jJo;ZxLcsu-JGEG8pfm$LzNYS>98s4e+CxyFU;!4DWwm;Kf|D8@w*QKRD}JF?M}^Uh(Z|M65*_n5uA-D|751J$w3Q7G_ZV6+X`eI}3-OGbdlSJ5D zo>`j1$Pm+y>@ow7Y=t{3*?~7`m&NcR$8QO-Q&-_|Kh$MD8GtNJzZSMW#G(5K6m`eI zqU0>^e<|ff#OAdAQQP#bgGaV+x7s?vJ$<``0k` zD`D*H{@9Nxwl|EO9L75Rv4x7g6wIbxZm9_3|Ir`&w>Dyn!q^kS*y8@!jf!;y0sOOZ zW=Y=Hd1QO^YsDU9P7j#LH@wh43O5V{-M=~tpU#a!II3q1DDT97r@U7=(aCZMzhsW& zIK4DwVa9?L1J>ci{)muicu|=`2KRJOI+tl87?%wm&t%U9?`Qt@tv+)GL@XnH3^voO zS05Wt(3?`D&oKnQ>aRWXGZT?**5w0=vihsOf`XWE+1gw8NB9U^)%F>-2q6l;@the4 zD>Ui>kv3F3r2GGrQgiDfGpWC_2L`m^EYKv|eXVo3?q8^2!%Me42-_Oge@(7_87J2w z!MywzY7f_m6Z>&WQ~qPQvOafgS%wh&)9!=?rfFi>uBV^P!ln4wvi^l)_T+FgSduGd zQhzc3djTQucs~>(Y|NBgDfesghCupPOSv%zqad0qr7c^^zW`@Od4*Y$U+ybr)y^zr z-2Z!Hl6|GzkSk>aIP@H;VDz$^kg@Otw!||MxzPg9e1d^wV4^ zw`Ci{{-cXYr`-wDF9bJh^M;>S6Z%gFkgmeoHXG1y>+9{rTm`@UH+s7kbPCT;2I~WG zNR;qC!aZ=bba3S*5Zq?cKJg=cNlY)|QaU}T64vpZR)L+PG z1UQYwy63|EeKrt88S$5V`pG;zzD{z7)jThnxspOyy3YBiVI>|a=G=3(`z>>r>~834 z`7I}B`di;}JTbj1rKD!GYA=*lZE8WN7lnj5)Qj4``k3qZ`&Wmz@uRwp&((W$NI6Q= z^_dYTwvVv7n(w6oh%YH_Lwa3bpGm}f>yK`rC8%Xxf3B8ssqZ5PG$&*Jjn$x~Id=-iv8R{l z&O{W3kV0?2KWM0$&i2BQJK%jSw&jf< z%6sVZ#7_02@=i11!>I09_i-l}3C{Yu$X_wf2>KqU(tnOzi@PJ`xtmI<4k6uWeB9aC z(6-V#WTQ6JEV}O^Pc2$Na`8!4N(-(qxf^wbzBb>)C%9jF756e! z=qXy^TGk4E2AwP~$=39B)f9GRiYcOTm0}9)6}o$wjTuc$_s`Wm^`W&_BcZmHnjBVI z5=F%hF|k9kv4_qx{YsygjYW5YyhYjAXNk>xny5Z~eBqz^Rg%LRP@(w*Ft+2hC^Iwo zm2%w9QV_~Z7%1iVyL(KZKz*vg52brK z*TN&a!s+D~-f<3^l;I~AbP8*k&wO%^Na>}y5cfxZlB?ECMWMAnwxZiI{f&o~I8JDs z06}g%11uC_{&?-Uu^&Ul1E2=qtQWi+(WhMgRCr1&-4C*v{$a)Agw$FD#~4vQ@{!aM z-830T>_>FDv)XD)fWUD-yi4VrTY>OHO(vq82-6u#^OoE*8F1chYDx`$UOF$D!lxvNaLw1sG#@jg*gE~rqgoruyD^3H+z-}#w0i}A4J4M zaEvwV!W9)Gc+9vE&8FZ#QD<^SVeuNp`2LvWFdSkjDZBH%1 zxMO)4ej@ka@-nM$#;A>m;*PY$TbNb>PV&jtbrHAtJ7~p3oO89w$DWWsY%SpX%!o>~k;H4nQ%>?Vf5dT|MQsZbx{ST;HLf9{R9ZYdwEq74 zDRc(B{HPI5`Oy{bb zeqLj--Fh(6_^I%QwjgC!bu4(5i}g{ZThCoYo@j)1XpNtkwSGE&_{}dG=h^?n9+hTv z%%jbJMjewWJ{kZUg>*fQgaxHR&O^^HszKibV2;_@J)GgjDi>F%X$W+D!9?3MvYYqD zm!0G`H@0+i_cI}UB}^Vi5lZ&~c%sp)-4wmxL{87g>djgdVUfjrRe3XCV|E%FLJnpV z$85x+X~OL_8pwwH5RYT&UrTO7QyqQMUoMYvaC&}T$ZHXBQ8f5?T=RMzFqg~3ACS<2 zn?N0HGPmWp-_n$w1qk%6I;^@l>tk!YZrhg7*JX%77%NK7+aQ?pGvckrX18?g1jdH zKG)h?)@m4X=xjK|zWEm_`e#jkV~=Qhb{2GR4B-oL-3f7BslIeaXD@LNaZ$(rMlX}O zI?rlr6$1kfOQ-Y|nu>P&_m!M!MsN0w*%^G05}A~-4~3?u2^7!4f)R^W2S=x&BKg9C z7l293eL1*{wS(gl|0ej=88t__-hhYo*D0!>A0#6ei+YA*7T!w#j3^`R)(8-K5(@mh z=~m?VIMft=0+!IqvDu9DQ7x+U(iT^7@S2q-Od7qH+3RtAP&o|q3QtN zj?%uJZ%V{v0hB~SsSCk=s>nI@v^k{dLJ#no7;#u7@~hFo)vKVn&Ze=Wal zC*8IdkA$SO_7rmw22G{K+L{bNs^HIcX4W(i)!VOxwoA4YR*|g1{?Q>r zi6FJZ^YbuxElnTk{n+k)d)r@Y{N<&5;F2fie#(hF*8Lc!g=T4?2Iv)WAce)H`LU`e z7TlTz(T?Dh8e-cxyX&&jRb)mRw84))iofFZLcgZ7{b}qR0}O4%>oC?+ipkh;J|~hu z&MASkq7Ge;ljzlu+9}vEOuZ`O?JrYn!hKza+xN%4D0Y|kn%iEEHgstBzU= zr44RI&e-t*XaZQ~6NHZ0nfU?8@sLKtenh{SuL@b-bA3a<1oERjr26KfRT6Fnxq}J) zucUyy#t&M{LsLtpPS*TbzOF-8Zj-xd?~6quaay6q>={D?xZe@pIEj1g5jZMM_~k+4 zhjL}OhurPk4sFAy7YAIC)o2%@M)-k#oB|!p&B&=4yZf)rk7V&yks{ z`IC#d`yC~7>9*Ib<(uN(MFB#PDDIL+U?)0+Nib3?rC-=aMe(Y2R$4$2sVP@g@M-sU ze~V19auM}>Yw_=hX3GE*$$ExO@|M+_M%0BN8rsKgF{&wgXElFt#Ahf)w&ED(&fV?7 z4+)2RD9<;&x|&@B()%tR_6n_|!JexisL<(XSp8AL23Ajf)IEPUdK8)Z@?W)=$Yq75P!M+_kW1u(cQ}^-# z^h!g(K`T(X{=*E^54hS#mwv;;Uh!)x2tGiU%s{oQ777b??+Lahwjr4dLH&MyfWgpsK;t2cPmGCRcOElx?tvQjPw+)!dS}B@RsSv$Y`ILU4*rr+5^Fq9c1G&u zwXK>?Gy5ud=vl@C4Y|Nvc!58JFRF-WQ=b}ZE;t0wtOG+KXA|E%$_9p@eB>cj)c8RLq4{i$#VI>*L}stZ5F9M}8Y6gu<6lq& zAq|!wAcli)Pxx2Q&#mfkK5_T&!9Sqq+&YkI`btEZh#b;iWLOaXv9~M@Y6+{W+MRmV zu$i)Z#FhAilp!-c2zcnGS%-p4Ifco5oSc2|9VicN*&Wa-*@OSBc|Kg;!IKNqnBm}s zdsA5Xaqu7rnK9j}^#u@0DvcUtE=c~*KyA-Vk8gyxg7iOL%}T)Mm&um+cMzZfx!TN|^| zS5U2FF&k+r?3b0kUv19T_fXlV_((R?d)2ZR-H;1UcypYXH>;?IyVBz2o#2@@BvhmE zT+g?ao?E0g+*88B%=wJ4EhN~%tV<=z5GOs8H>gAd)i3%U91)wYAJRNXPM9>|c1!;^ zYkaQ;3nH{(mg9$n87xGYM{0Ld!rdQtpH-}*SkWNXaCXwxBFqc3J*n}=-sx_^Q%_zm zn+5z3?6t!WyJZ(az4oY$iZ-t;nY>7Eo;_+qUy=@G%ciUux}kBF!v(hEV&ljDs1cVz zh*``cM2}`Oq(7lT^Q~p;0X`IXKhO1HvuW=G`7PIhmF(bnDj0WT}xU-mHrDthejV-Rs$)xJ4)eOz+svW0?g9Qbz3Da^D zF#%sPF}f0j5Cc_UExv<%tvwO%8e$g|zkj1UbF|^)T3 z{pj(r$kuJI+1moP)|;KVTg`B?QD?Js{ij0eB>5lQ6wYV1y;S2zPr|ptd*rxbJNse7 zK{plMKeYAWP;1(jx2($N-I2tVk{`#V~3xa>Pc!Mq`&U{F8+H;@-!W(&@P!by=A zG!x!>ggwtRHlMi!F~8=hVKaj-5zUA?YLYFImo35F4*He_6FEGFnw^^q&r!5sl=3x= z6+8Jhqe=H1F8?I_X=AlbniCx4rk&>TPR)H{Y@+}YoZrDG^lu8!C00d9qfkD#a4->) zsfsL_YFR5X)=!u@@sRkvojz%@Ud&_#MP+TFBS>UFaEuV_eH7~eG49P;pTuAQHt4&q zKXEWNGG3Xl9tr91PavhOP0r`6#SMgX)y613FSC$P31EAo@CjTD$$Xy3hYYfLSC<60 zP=z5bYpnDw40U$v(HV@m7@B+^HjxFEkANLn`-|R;HgE?2Vq4&LIx{6`|FxzKiyUc9 ze@7f~q^fHHUix+fEnnz&^@Op3y+KEV#824VvAxinmkN2ELPotdDnoJaUKRvxM{o{h zQ3iLfb_6@1JlL){!2MQh`Q|kEJi$uW(XHIb4#cIz=QL1JPhRc4cBhjd9mQM{fOlt!R){drOBs@B@MyC&zJ$gIJp%28?5wf zMxkw|+;Dgo)mw``%-+#!N*w5dQlfPBwkhP!@@AUmPo>4R^-%w%eAW3eFWP;Q#|EM! zYDh52pHlLwjub`%9yY}Lp)!){j4@oVBp9X5&5`zWu}G#y7Kbq1oV+xBgGEEfXnA9L zr}<-jy=ftDfOgE1x776s_l-LDNxZw2kJ;MKk0B^o8o?+{ROMlhP9EZ_o?P%Z&7~Q2 zcn^^cG^lVq@^?JS1b3Dm?d3c&wL%sK8=xp~Qb+m+jCm8{WYBuq#pj+U<R0}iy2eS^D3DGkrTM);C~UT|MHI)}}0gCFA?27>ol@+LP6E3#OM z$Ixc*w+lqk*Ki{)E7iiV54>n_*V*C~j^HDCt+l8~$k2LZXp{D@7oK70&Ue`b*el*o z|AT^A%xS6TX?0}BV5Ozoh-DWukNeO?xRTpF7;9#YY#DGT8N7uDa*g&+Mc5eapFU(p z+Yb5e!oSKp<%@w&sKLQAffHNUOp@eg*<*B(1MdsEF^H6nqp4!64@;K znc;&a4RCN}hyN~|{>a88Y;ndZn1=1+?M~!53}dj547d18f-|U0(#?}^@2OID83D z_*{19g8!^3S;H-L?$Zv%X#J%l=OZlZ->**ciWgQLY{bjj_!Av}W;FFdqjTLy-ymnv z@ly`thK}5#mfKUiS@b8h$A%&ChFPn6e8C^HwCx6>Mmy&X+)IO2z*s!~azoZDC34$CAw1+QO=7)?ML% z2R~TOj&k{(A@`L9X4o$mCnvii!3S88(>oha>4P-0Sd=1&5YhT@c{A^vHiyGta$@|V zYYev6drbakKAndZ3Kn0NgwO>zsHV@l_%?q7u>;sz&CY)v`_8ZcwkN^-tRq^Bp+-47JL}?LL~gtFJ(#isy{F)Oq@UP)L{RHXJ!`- zF_MC?AMgJppOVF{w$k6EN=>EoH+bPRiwhbLj(~XM$u0DXS9QpCi*NO(M69}l;tuSp zt{Zmd+EbI`y~WGS33i=BrCJp<{Y9ami)L$^>*`i!VVSv58$9qjEhjBxlEa{&kamj3 zY5x<7IOk+K5WA>z7r&V8+^z@0&TZ$Z&TZzYObrZjZvX6f&CTjAq%Zw_USeKTbyu?} zhW_YkCN0jZxQGwnJe!pzirvAN-;}-7D9MF$pHcAoPLVl$a!YENiVJ6kf`E1UcIjud0#D- zt*m+Wqv|m;0mCr&J-Ou&v^aQ_^+;>PB}$qlhFD#7@@qy!2PCw+EBgN^ zdl&eqs%!B-lT0ANz=@J*P>`WUO%!QRsZ52MLniSI4vGp06)A0KN^fneG9w_E1ZN^S z9R_l%t&eK2-nPGL)!Nox4Qeq7knpgWfDay`Ad2TOpoo?LD*1ocKJyBCfBpUQ`DD&H z`@Pp*d+oK?UTbZ2SxNyES)BZGc6r@NnNz`>&VgB7lbD5_lawzUc_5XS2lPiCMe@+2 zHF-WRwdYyDV_Bc*#5IU9i@d0X_TWfG<))7kD)*icl80x~OXm0xX#%}In_lyja~KJ- z2Jy{gRjb9uV1q;{P+EUQf`jKLLD3qh88@%(W(?I{RKhNG!Zr#Pqn8j+q=E=+S*?5N ziU3|vJOOz9l|j@dXp4R68T)fmu)Vy!{V@q>c zw{Ajww-kO;q^br+h}L-!2Wbt;G}jg4qGKrE@YXLDD7-o^KswPUh~4GV|MHSOnokE^NrIp0F1LM&0vSFW)SX4#1|_aLf=_WJ zWT;lu9?Jxt^Ahk}0m_l9NMM@H!1|;2HcE@gk>?t3whCpy_sAkOo9DCm`C>I%c)f-j z@Gspsk#)5%x`w1Pi6F2Mt-;CCJ){W#iQY@ z-0kPOvKFuA1~UZlD#Zqg-azz5xy)JmjZbtCETcR}`y_l~5GokvwuYfJZ31HB-wHB2 z3L|S_2hOBqc$JYn^i~{6WLd9IlNs1AojU&{u{}a1K0_tGQ4;_0>k>z#IaxOW5D(Pp z1QPHK+^7-czM*v<@rC5X)5pKKg7Ks65W3guUd(bi>%2qeR#AZHpW@NAM^QMXefm^r zGD@eRi-1$e!`aeehFy*z+x=$cT-aSk|+3T{6KoV(xg%p zS)Y!-?gXGrD!3S5-YI=u?5g83U**Tup`-~_RQr2WCdY&6@*H?ikqzS(vnS}$y@kPZ zxI#MM__Zbi-CgsD-q(%baBZ;gCBZV~sa!1B>spli3)v@#PJKE&Wj}w)dG$%8a#yIyowqK8>voFQ83ys;A9#9O~%%3Oy8xGY15)HwLe zpR0k8RS2ar)&+UuN)naa?prD(5dixh{DBa~XvCID;DRCkA1yla8c?{QeYCmeku69kSMMvXk zY}z?D84vo~Kg>q@3uoD+kzvX(ZYRmiqIQ(SKa%%`T3$E=!w3#dl=6{!7iitD7gWPHH9 zZ#*#uZt8dtEA)V`xz1OkTYb&v>zbJFLMC0fQpMD0fgCOnO! zMZa495XIsFGVGyPZRH#~t3A8X443lx;xo}*^P{1{_PvGNG<|$z?}2FbwDuDPW>}P@ z6pbj~)O6ImuT15wrX9ZMEi=t<1>bVpzzv2n zrePB9>y`yQClFNt#o(zTT3Is1Z11WnlV)~R6*{?!oUan+Fz}H-khI##ksOBm9%)JVn ze~<{I)jQpV;Bc!jpNqnm+1!Gx%?$Z+z|lG zOk2!l<%Xi|M)a?ZBlbIu&Eh6Uu*Sbk-4$sXiwG2-wx%&Zx?<@2H^^HV zZ=b2R@w~YKqwM`n!!W`p3PY=nXtb5sK=gOpd2q^-d;BbDub|&8ltgqJ;W+2#>ed>! zzx`0Qq6Yq;S%*SJQ^OZUOa)ALRH1E zSntU88I3{10lqcIfx2$4xAwiL0I!caWEp=%*X|l;Jk=Hxn$D`(Pe<66_8^~7Txk5A z6hG@M0Q=!npzlquA`5`(iW1-{`B{KvAcf@0=B7zC=!nRePDyBQ!YOxpeftaNt`EZ{ ziSsok2ab4G@Rg3|0v<&f>{lK6i8EoOCcB4(ErMGQVj(B|+V5fX!Y|2$VgRNmKyovD zmPCq%x+LC}NW9Sb9(%}I{bxy0sr_obJui`{jv)IfR=t*hdB9qP^hAaVoDqDG5mT0- za{edrGZXPDqKhJAe5*18R}$#JAAaX}k>Yo*EEeWyAkDO1xQ6Z+bg-_4MM$*T00b02 zU@u^RK^<|;tc}T)ES##?e^9V!6ew_s<~*b4fb}{e>?AtbVX8}x2g`TfB4_k|LWk^$ z{Pg2V><1JkCio{gc80eRhQwzsJZXy!ILqqaULw?G&*V#h_~sa=L;;a~3FDxaDq$7g zrXBX%)SuvLeNo-R$PTQZjK*(?T+SZwZe1`j5X}!nXXVB7?5ABoa*M?Sl%N}Y#d@q(2Yr%4Ky2=F+^*@b$K1SO zqIUAoTknygdVSElBBHThj1@oW#6PRzmr49v5+4Vcb*I9Mokyq8>%L%30#2QZX#dbD z;{#QOV6$}}Ww7t|E`YK?u+0U9+I@<%O%UnidWSy-C-0*w@2@29P2`RLS5n@P@5E~= z{(gzSLfV%>uUWI8*WqI$>&MHgWyB`u8CPCYxZqMQf(~0Am}{lB*KU&xr~PgSR0mre zJVLkc@fi7R*u=mJ(hNLUEsx2nDSpn_bhBf}yDfBskPePhEn{O_< zEqY@qUT$%*Q&JCEhWS^>km|FLo8yDIf`pr=Yu|+6>(L1Nspoz>5y$zqds(xRxF+0`x*#&BRmr$(U`jWustSaDhhYWvm{FInMi6qRoAm^;N zbsVEyYSeCa&M?-W33AC!bwF@ptA{emkDeLUuc%A8WjhbHPNPT~t1Z195 z<0YaNXBAGRmw5;(7pnAUOZtVRS5&P3ddt1t`PMa$(2~S#Q)ALk+}5I}@0;T={E^Z| z%450aMnr4?%=P&9)5K*6VH{-4;6?OppzoYaqR>xbZ?CpWEuYZ9(%5y_tTpGzVe>lcA=)h++OZn8A;f*9JKt~U3&Q@ zUo-DgFOJSb>vUfHu5D6>>vi30g?4( zGgh3H8YHr%fnY9EHr|~; zS6TD`*P~1#aP?I+myl{^S(_1y*^3-tHaM}rOUFJVvD2K`?>n*1JXCpCNi3|l3`CU^ zTa(UvyTppud1B9ZVlPX_-YBth7n&kCDgHTWPl#Lw0i&RNz}&1wx&&-TwUv*{v#-9v z`%%N(*o?lWt@URJ%nEX{0tsa9XuzYQtKJ)^-OYt$I%2eB%O+c5{$|4GHL=KW;PZlli?;GV z6`bmS?)|u7D)1VaRbPn}s1F3=z{hVQ=i7-zM{uBAF+VgbM?@<_`vXvi9DFRZk}0V( zLj{2xLrdB>$7x@Thu%7tx~vrwfd@7$#Z^w!kJ3@M6J;-OdVIbUdsRC2Mv1-Ni5=*~ z4ob(4BbGux!txe${enlLzTuMXj5Ivb{Bh>|djlt^YW@k{sQLG{0ET(@pgjBP@AP>; zXqeH|*HT}@#1d6oxmvT^FE>7KWJU(vlP+@SKs*1}NvVS~0oS&G>rLHzJjD5|0K|f0%Cfya~W*6ViMlEs}%=RkFO+l0I^?3uM#uNUu&ru#>`YR>_Y`0ZDl)8??)}#D%l@kZRKDJCdoxP zSqTCTrl`4gTOd|+F$;QZ&PkkoC@SUeeOpwg>soLI?*4|JB|cZ{uk@Q6)dU=#&5EGA zs$JW84y!KTE)GR#W^f>EH-}autFwIBiu}o%VW2a!36kdLwi%c0JrR1UKd?9EDVQDO zp|`3fp!eJK+i;-rloR_}I(CP|j&fpSPV67ku`fxiV%+g_?8M%Yj(wC^24aR2F)tkv zk!*5V<0<@8zw?Y`2g`smECi>H9?s-fdw?zG2#W}nbsS zTxC?KE4Nkt+IGXlaLu)zlQd2gYq$1T{_?jFOlQIJ`AQ2>Ig#>m0BtoQ<8G>ubIro* zVzasZIyNPHN^D+k>i!azZJgmgznFXJbh&iTSKg_YpD>TKpBQOw8~bVbHhi7)-u}5; zM=iKqu4Wplx1VsA_qa~*zNF9mXZx2U$J*s~`HA-9?%obHj(KG1ML&0Id3R0BcW*Ys znEjAZyK74A*0J4kStGZbmW$ncc9-uF53SAOq;iUP@1!o@{d48hc(5z7;xS(2qbm~G zlX%sdu3_NxaA$TPXLPBLd#DSv6@v&8%@L0%h?Km&C z+)TzqMUW#B*$=&&>vQEM9n^T_5{8aSyyv@vxz*9^_)XaZ1~#X?SAj>JMTj5?WWMhJ<;g}-syS4AFE51Yc~aAmv7+aZ=-y>q3%D~U{<*e zOv#6XlRp@srom5m=&iD0vks$xL;-Ra>huD=t41tL`*;?}Q>w6oyhN+qO>K)xFv4@} zKhu*-yzQ**s&Z47bDUsac}iqmi*p|62$ak>gDg6s0>vZCaUbhXEby&9rB^HNCTllZ zucEb}81bCo_O43RBE^MwRk7v~r52kEc^Vxvb5+M)=ApNKQ#y7Q9gF`;wKrq88yq40 zb-aaA9R9kiDo>hD(ehADUz_5uox2ugF5Ze70@hfPHo(VR)(dl+AR2pMFFb-mO9AbBB!<9!ThV0E8l|@%sa0Gz-PqMt`FoUg5>@gmC>va-a zBe5Jb^<~JroLvth4Aycj!sg0Z$j=v`!$^xfU0h>~-37$q19O?gXnhDn*VS;)+$joQ zVs9_PsF$fj?9C(fyco5wIeS8#5m%^)<})V}D2=o^=Gfa4*?vhNyuw&yWoU#VZ&u@5 z@LNW#ekcUz(JZGL3-LEhRh_JO2D<5JkJ?r(9KI;G7UR209$`=z#`k#Yrr zWWEK@^G6Fxt#PFGcezW6$f2+vm~~Q8n0Wl_GKibWK}Gn-It~s>aPo z%^>KXFQGikMzxt(MFuc0e*-BB_n~W%LjriD)x1Wy;owz@S512PV8V6yH#RE-^%`%GbArNv4)C$Lt-aO zEVh}>2?Zbw4hEe$A{NgN|J8>5XQsci^!g*(!E?C`dOnBCi_Ggs`=U>mHd3H3>Zo%0 zygNa^+fWySBC>CPWF4aX%XRs^-tt^>MvT?0BO>q`1D zF8#xvA<0BzOAjC$ZQZ6W{c#|@w;YzIi>a( zAer#(YFAJErNn*~`63ccRUMui@(M!};55T*2xYdPI=O(rm3}|pra(7{N_?n9ftCiOz zL?zoAo>6CkdS%Y_!#U$KYOgnN9Kms4r3eOD7vlSq&= z8@kkKQCj*n_RuK-Nq);mZDNnR83;ENvGqbYXZ;l#f`{4?=tliPm_&z_>MvewN#0}9 zC99uMM7=QaEJ-{)@=TrgDgG+#<;-uh5`;hf1({-l|I9;g6=H7v;u1#fMkI_3;r(q6 zmzBmB$zK76nwz_H56Mvu4V}{k^-Hjnq_03Oos$2cD{|+4Dwv|`DV~_F=NnSbH6G|= zo>~vdhIP7PUxKTlyJt8pyIAEAstg{FwhoRa7cYr=lKg5ELdA{btQ==^TecFaNBxDO zv_>CLQQ=B&gz5=qlr3GVeatoypbY4e9%OyGmhPbsiF~#jXM@-Sey+f?g@@iciWJsQ zXn-iytt+!D@8xx?(JDDv2C|IaPyF7tI}`jeAcr6DYtL?wHQ+gwV+c9=%f~YLZFr*) zPT-1XI+e~+m0l>79=({-)m4Q~AMAfM$rgn2PpRMVb|&k0_;s`|@ypc-WI}7=ziY|l z$D)g|Lb%=IoXZOITqg|gkvk_FuA{BucZ?51t2$z!kDSAoR&!X+uCAeGhsz3H#;Gy( zJ*)}s7G|MP-)jo3E9J%f35&!651S&|n?5b2z10=(Ck`1-jf^NTCeA0KdI6SsG%9vm zp81yf$u?nLnqMIamc85xXXWYJ_L@}%zVc1@{^>JsbO(Q^JRNWw&jQXJMV-hhgk&+c z-|6j=(SfJn7$IMdEE;_keXg+^!%OnA8ua*S@?70V*$tPg0}b;?W%C3%a{AKBMNC?)*!>XNzIx&=b!`V zH&Dg(b}(=q#`#$=eRv8`g9(?}5>5pA`c5o+RlNH_fjy6LLV3z!=% zQT?FZG6GC6_({_he=cJ_tNP7t(bLWDo@4mgxXKr+WJj*Md%IoTrb}v-dHqAGF&^ys zzMCqtO&93KMuTzF3+i*NMHzKa{N~K@NZ@DUeCjow+q=y-x9y{*Vl^KX3q0zGB|Gt+ z&qG4B1^-j@H#wf>TcY{2r3t45>&1(s&%xF6n)()vc64lQSDz}kP>TFy)Co&OT!|tb z0j~5vk+%2UZTn(NuX53jJ<0T+uzq|cJ!jWlu9J*im(CQIhr>JT1)`Y3^3iYE=+et1 zQF2uY4N!=%)_xuq-#IUH=vVT%PHnm`zP3O${0wQIqu*8MH021g3RNC-WT@a~w1#OW z;^-8767Z#&LXp&YcW`2ONx`w;pwzAjy;giW?64}FjmC#UcZ{5CN)#zNVr^`s#jYhK zs;%+OjP@1m=$UcX@z7iUMhmPzT)>9w3Ff2H_huTQ%^md0?6U46yHXvlAYte>Q5y~| z=GPsX-cMaPG)}a-M~YVWAQ@%nzFc&fk{^@iSKw}sztc}yD*lKl zLw!>=r|~8QKb9ItT?$(mwH@!je*ByD-+oy}>eTt6`nx%Jp~zRF4Kltt(pGc<5==xw zKPjO-pl~=r|J3|agHu0_d$!pgu)Rdx!OAgm(81Xl-aAmZXjDn^p(<6VB3_e+?o|%A z%O3N4H!eikPNr^(-<8`(8mXG$JY5ZE=$&LUl9~xBLz3-D&L1VI<5FY65Kd7yBl5aT z;Kg3WE#g0jSgc?G+Ab`cR+pf5?R5o4`(C%<`XrIJscmtOQG2z!dA7)15{DuVK8uG^ zp|)5c6e~1ZIy8ENJF2_A-N6ywj{1UDN)!)Bg1Ra};$8F;^8ZDDVuOeB&|71`)w-e- z`d;IP#K$|-@TKWxKY23#xuWF|L$IF%V)j;(#JNqg3=PZ=`q*zlb>-A!gK!&c`y^`Y zM*SZ$Y|eZX(_03m2O9wImuwFv6tXSstsfnz?Sh;ZaYlJ0G;%V+Wmg;@PtZ@azC_5P za{=!_unw!-gXZVuFrr68KSTsIIzA=*`5a0O)rwMrxZ`u6kP)jHN7!5?cWeaC{zpTH*JZ@hL6!q{)glW%H za<%tgEy2;g=I=;mksMHLd^qLR|2X{lfX)Gh+RD470X43iaGb+YskC8_DzV!9*PTzP z@khS+se=DL9(wD~Xo2;@H#qzFvSB4Uz{bUnotrF^;jcKbsuV{(i3Wtu_BGdMOUo%- z8gEz9+HgFld5&rsp~9V4p#=^I}*dG7BN#r)H1CU zE297c6-kO9E#3ZTQ5gQE%wG$U+v^Uv_WHaWngoz*xLG?H(mwO_E?tS>b>@*Xm)aXp zjluo^$GuNM)$~^Bq=?~exeLkVQW~#Ce#iPNEv+;V`piTxR-6c+4^&O)bll5ceX=_C zGpNu&Jyt_wZ{lEL`Z3y!8c8*r_)R5dXU-Ljp(yzKqXGjklDZhwJBIeOaL!^yulj*$qS(*&I050Sm7Z7kIAM!(Zmq4>GNuV?NiO zhkCyhhtC{|xqaSU+KN9j)amvRRBi6$fWC3Uu&m(YWNa9OMNp_Z{AG51Wx5E}JSOCI z-Nd$1M3(03#uRzPl$d@DA)P;_f1#vD<(3K0WVywy%fEE*2`%>DOjAAT(sOjUW<8Jp zg4opDa9g%!bZ{=GpztVZq?OgtQHh2sgCi|Ao58Y{FNDmT4MSGf!luW56M~bP?;+@3zpMyNbUyQFQDLgREQ(x1VAOUt9gR+l%*D{% z3`FK?k^SW6Dm%{p2Ite()xx)ese1UmFZAA>dblHxB76uXy4!J6zehuE=yq+}gC7|^ zzs=|E3GMfpd&@t;zgJz2>HeO;9#m*>>@PWu6vEw4sF&0)WGdQ=7>WS2szMnaA;uHZ zk&T`wq+>L`2Z+I6ey~*1Ocjcgh6mn`y_>W^kAw<}e0-&|F4TK^=9Nyc2Sbel=DyVe z3l<)^pom^6&!SRCeJBmHXo>9t5&U>e#j7?HwbMP&W#0w9kRc&CKlh*-%~d?~*4HT0 z3Y-Hf-H8w%TlNn2QL^CJp9l@~?!5a#&@^G_w$ARNZiV%B9d9a_`Dm*v=-ccX@(RzV z-_$zaL+Pnw3TyH(>MUO;UIC{P1A{F#zk%4(rE(XxI5+(Z!K)jy_~7hZKEx@65qr5* z907{AybXl?wb3~YtXrMsQpbT}eTc|w<==S9(zx#t|;ceNq=*P(jo~Yeb%a2_9%MRBVc&vr*rQsT8b>!%kO^w^O_BFdjw& z@F5+_=dRz&;XG*;ZuWVdHcCBO>@DW5X&uon+ERX)-|Z}Z(t+4a27>Qx?Dr@kfj=1Eg=b~|Vd%eGOCf|TzLZVqhE@pyWqW{3shWRsRoq0#J z!b?WQ)odOQ$H5JGIRuS6lb}Fs_jG(R+7GzWB<~vW9ceh(iuGO&R%CKR< zvOToZ`;oS41w95hubYAe8{|&s+7BjsnpT3@d#WX;mrjo%L^{jf`$8Kf_9T8 zD|jvi<(@@lG^cyPINCV6Lv}b4iA|(5!3-jsuwr#?kTRKWM1#WJ&!WlKLHiF#4h?1YuONTCiwE-N-4F> z|65BdIBvSx-@ZR5V18=kjHptzRTVlS1#7kjm|=wr^wtWB#OfG}Hf)Png>y?JX>`Ps z`(0U+qk)RNzHJn*MPzTu!ZuBO7B;;q?Z~z7b!Blui|v3fx@=Sxg2Znh=C+RBf4)}s%Yz0 z3UeA)89ZB@s27t!l$G!dlg!z-t)+hxGUTJwr$xkhcOYk63B5YCR$Tn_6|efh#Rg7m z${}4}@s9V^@$_A=B>1s-2|Q(O6X>$-B!Bb)pQ>U#_`_Z+@uXNT&O znD70P-_zey6k*yx;O?e!Sh0Z}SpuiVJ(-ruLIWKBYvRB1c z2oZW-7^mS)=d)NzGQ<0+7XFsNI(q)=pU6t{({BG7X@tO)jM1Um^Hm(czQ>Lyd<>rl z7>iy_LE62jvS8-y(IU<2rBZA9F)#k|Zq$;&K$M6AW_7o7<&D)0F-X*R$CJ_Ai4iq= zD@A({rM07h=(x^(Vz~9wS82#|yvB#8@KK0qcx}m*;|7vTi#5xzBHzx*{XC4-MIl?y z-3C)MF?-Atdf%IBlAK3#Wc*2mQ$@Ch7B2j{eNlIb-uHU^$yE6Y2A5JQRd*j2@Za4{ z&-GT;4d8!*$^pRMs4J)H7(KE?UPzuhcG;H!BeC*XfQTrc4#VN%v7*DzP0z$sM>hJ| zUl>3HaJbqW3j;%nSWFT2L8|1M1}EbS$&BQzV-!!x$#BsWa$Y4l|0W=a4UX>h1c=R`l6e&8$|q-P`$X;s!B5e9M}7$Y zpZBqpFaT8-+-8(BpPc)g%x{}HFF2u@cz4X7|z2qS|Kx8ZB z5nvkLwZXHDUUcF{{8Lhd*Ht>?QtXLhfl^Ojanl|UHabsUC-Z8qPdvN&itpfCQdO9p zeZ{|$bmn`;Wz!&-N+>GV*%)IF7-LTuV~-f4It=g5;7Bpn?Cmzp;we&}nLDF@wMOf! zw|KVJy$&>9ye!e$c#qm&O-~Z0+e9848(ctd`-;a%8=@n6`C$8E#HMqSwWF_iqy)9z6(Fnzn|Lo&DflDLD7H6f6nHjo_s# zcLB5tuSsoPxj*GifK4Cn5CRs>UGh`;LLw8*ZFF9b^%eggDJC}fdwU@@#jE+~EB^c) zu9=ZSICBGTgjsXvlQmjhLSdIs4^7JBwS(3u0}h3eB5&used2#|AKJnnOhlaAwxE7u z9uG%{PFsF}=1gP?HEI#rb4)}E25Eec*RfkypT@(=l6p9Z*CLk-)sQt7*>skQ?CVy? zDspD8;63qvRrGq|7v4CLJv51*;A7%_s@N#6>ad5hX#{#yKXS@OPN+qmB?Q^EV%CCB zssw#oPbvRbloOma@z*>;m6RfL)|!(j#i>hX-AyV&T4&$FEJ@L`iAW0Cf?X3=$m0xE z6ZlK>6YEp5w&Z%xQYl6Wsr(MzOXTnY1l5ao>V!`f6Rg7!4NzgU^*bVDS-0OIMD0@@ zU_Pgk+8a`#ssoQYp+dX*pUH6**{k=zN^s1U(>1&AYO){+%d6 zE^8rW3J_BL^JL7=5l^yGtd>Qb+bAC;3-?35DJ#7BuIz@)UVr()zj}Bb+ZX?4OXq-m zpIIl;I~T6-WtB3kKFgVuXI34P)i>OkXCP6k`U0O~p5PUtfp<0tMCA-<2!BvmV2j}* z*C;vbzdBeMd;v}9D}D?=;r1+IU-ZzLI0}%JSxNeLIy`MO8;81kiT5l!UR8CqM~iGD zokC@8d01WrowYEim8DQRcX0;9KFj*0hM%B(C3)Ea|6|q^TQ~61c8PvnxoO zUQcikxL5*``0QY!LfUc)5>vDjAf5FYqbBfI3vULxx=Cbj?~km9YYCGJ<)ARK-oa#) zgiquIhbE^JD_XKX>q-`;ba+bNCigN64rzQgnlo9lev7NDp>SWp%2Z;G#$-JivGGHp zZR0xR;r%qofaC}avsqVRJ_rgqm&7_Fv)0rwMF&YxC<%Td38I4wcvoqx?@9pjagWFn%LF6HT4u$6AbD8)IA^eG zR3`C~Wae&qj8euCpvoqoT>{oga;1m>?E%H^|4_bn^c6bPCgR?(Hy`pZ};*!&{NxrtFZkcz=cg4X_f$M0Hu&J^vyX`F}a#=Ls`^7e`15*+r2O^#{l4)?!bP#t&EG5Lhp}lQ&-}p z_?P7QySc^sh2oQQwK=5^x9i4Qc2hAjyM314)Jv)F%2Sxyyz;);q8~KcilJ>~a5ud%!CRdHl zU96nT2I zvb49m-5QxlUDtvfW__moBXwRM9e2Ida3~3{GmW$^WXAqjKqvkiDEu7(UG(JvEsz(q zzB%ic&Al}!QTHo`tCyfqe*AwNm=#4QvlR>tWSt}TnVb!OD9%q^+zKpby^hWdzM(R{ zQt-=tzg}^CWE@Lc1-(Y<&EhgsZlQg*@x%?GGkMR&nZ(|A8;?&5P7WWaXgraB=Opap zX1S~)XNm`}Lolz>PYLZOy-U5{7~08uwtAlt+QNH|danvTX6}dsbU4DCH`E#heVIj5 zw5B^LQ07x?u>URLBF~X{Gj{@!P6HKt*s^P1l9D*zDR{>Qf1jj%#Yo#ds zZj=wgelHJm#NFyqRoGWNlon)^xd!m`;U7ckqeOFWA)P3JgtRpFtMQ|#S;X}fFHpr7 zkCp;i@P?z}u{|_6eyuN>rF*xd3&VyhI*AUqg$|ObRAu@tnUV!2=U+Qpz(T{ERA^0| zO=n_*k1tJ@AK#{mkh@ND*Ag0kTdl9MEc)*l#u6JE6wUn`5mZu_S|``C-*Ccyz&gSk zd`@UD1wY1nS8hGO^4C}V#8!&j5Y4?!r4AOU61sA4;Zu?bj$;!(_{V(r6>pQoyIZU{ z(evha%%`oye4=|`ZnIRd+xAWjqIs)BWNpe}qR?Z{n>?9tGC+m)T~ zqbmG65*~8G56gK^C0Z}7Zh8#`=qrAuM{S8~aaJ)+5^+rhCJ^&v`JOF?na5x3LsTkO zJeNq7(cJxeV8vw@9ip7oXTVdE^{*=HfxhCIj5;^^1bw*b3w;}Dv$Q?Ifg_mR0T(Nb zvi)87lofC`ZxdkGCFkpi)$(~2pH>4YRwFLXvewI6j=Zhq&6>jxC4EzBj2Uxbs;%cF z{91lmWPwku$BFqho>}FSeF=7n)=ZTe0iPlp15HP!^aMmCDt_y!$1yyqG=Liw*g!WHyZKV_q=lGM%f}sQjzxQwR*GT@6 zsr;h+w}b3O5c?z6CqlScUWchhi+$ny8kN+WvFuzEg7Q;^6Rg~gKwuY0WzB)H-gRr~)ZMrR=0F0;LHt|RDB8!z#Eo0oq-A|W z3gqaE;rj~#6ou_CO?lH9-U$o?UtL<6G`LJI(_OYsdXV7Xz`3(B+OuesoO>*!p!h#C zg9l0Qd ztSd?Bb3*BCz||J#SI*02xmb3vji$bUpEPYMkmlh*UGjF zZh$PmBeAmv4r4r%C~}+J7S%`wI^-C3@sb2UnF9b2sErg5Aof%GGO{`zfE26KS`)Z5c>ro=m$0&_9qP#8UyC3AG0(G6IjC39;sbQV*kc++HnxVt*~eDD|kZl!Eh<1>ZG5 zi#&a5H#bQE+$EO#gDrF_DoY!E$_?^m#DYQ)A%u0>G?ei^VR2QoqasBhf2tZUd^i`A zK~*XgwdDEEMnyoMAzrmt!W~d3TI$mZMJteopU})cr-4b#^8#gQ_w`8s6+oojyGSFj ze)^xPzc-z*H%hJ+37bopy-Geaz-7({9w1rMT%Pt0L6VHv=9`_^$c++f@*}ayMZvs4 zk_!-((el^8^nW-ZNVV;oiNaIa-&4L4baq)3=khP73M95$T_h!UV>fd!-vA z_|cmFM0H>ei>zSIjuYSjr|N|$5!u;f=QVfRW(QVkru`x;*&_RavQmCZ&u^)^nWXk6 z;+oo2&ouLdRCPN)R^)nzf&@t8kY2lylv>lZQr55d>CaHG0vd7z$-#T_^qms~zp(6^ zlzeD))?7hHmVT?{9Nxm~j7*l7{NqV2xjkedugYM}bJC8_Oe-}*;P^Xy)vAtvmCatY z^{O3*c3rfi?d|j52dq2VcIfjl>ckIAxMOYD74E@8<>Eas?GI>8p`l%>6_jpQM8=%HgWJl;S24|iyKV#mzD?4}z zUy>NME@MAWi`qjE#O#0Cv$^W?P&YAJkr}X@HxE0dZ%5W)W66l zMHm`%Gi)FAk4O$1rOy}6r&5^Nsm{pxosnZA*&Z1g4-@UaaX ziFTt1wOX(Pu(#{lZ_p?6ZGgdV`U^F)K1ZH#p3V2j6MFbvp7tPq)ckkguSG=QEoJ^* z%0#B&YCWaQHld}now6d+c#=Bzx1@%m7%DNFfCfk^vJyXI>b0A1-66p?~d zm86|$kk%oJix!~kKEZl7z;=_De!QV<8OTLd7wv>U%psF?a*B+rvwO&d3H!GK`ceAthM={qaG?kr6=a z@fBu`@+fjYbM4V}mB9;>WrF!xFRpzBp$S)(REj#X4<3hV*hW8G*OE*oBWZR(ARAy* z4}7N*2#N_{LOzA7SaTc2hVr5}lzMM0t3TuDI#1|41k9yIbSOG;xZy-s(7dsfIUoYs z)c&7n>k0JEPEC-cr~UN3Dg$tEqvf`t3OsfoD$wONa&Em5-QF86r<9sP45bF@-t|81 zI*a=!c++B>Eob@4Elfsg3hIX(t;q-4CSlTF?z*U-$;I#4+6&W9CQ8bqB(x%RMA+yO za{-S#Lq8CuF>MVuld|C#JrVJr5*IHMV*Tm^z~+(F9?G@^59OMssjTYejDiMq0h4M7 zj-MjOt&!TtQV~s4`Bi2q{CA1`hUCAtAhchd^R^`Ak-8GnZ4uWckd#Ha-VW(-Re|(3 zM*XV0RR#6sN2~JPq4T7MDr(3|l)qEmXF_^ROep^v%8ym!3LoxxfGgM&nCv{vB*C%VpNYEp>$W3vLA^*0zc1sj>&6Rr5G>w1;JEs zwmLd9k86HBmjq(hqbj`5gNm^j#|{ebdDoY}y{g$g2(5lh5RT`BKJ>?K$T7+{Sx0CM z#jzSocD;A4?1X}asz531Vks>CSN-VP${>EssYXJXAB6sf$r}MmjF&|C%}w!UXFlW3 zG^H!%@kMVa^hLib_WLF}avRXr(lvjF)Kv&d#f-Cpr`3h;@?>dE>!_U0Lw`X3tdJhnUmC!SU3`Lc$XBV3d5I5wme{m`Sm$sM z*5>N0?5hy%>QC{9HaWKREHv*w)FR(^y39)d< z`>~Pb9eA&@zX7f}`0+%gVV=|?>MBd7M(03}a-o^RC!vv91E7&7gj3R*1o1PvtF639 zhz8mUomcl^PM?}b4RL!gF)c>#4iL?@llvJ=e?gbX{WPF+V1;B%EG!B9JypNa(|QI_ zhB}6i|6DgW`J!_QwO_T1bXBRhaUu0abzH$!fO*`~zJ4I7k${Zd6>dl8a2M#k%e7YT zT`veO$XzeUEt_m;nRl%=Wo-s(KV~V^Mu|dUwic1icD1<;qA8O&J_LH>-)1-8*oW`N z;CW(*C1xU{HgNk);|cGb`@(Hk5YG%JzPYL|wA+s-mPj_GNV`Q*a^~p};eOlyE64TWJ5;19HHCTz@G)pgE58?NjKf`CC z$c**yiJu3HSsC(zn$D$tT}vA@sf9 zP#krtU_dT&IdwWtCsXS`7lAX-VEBxTiY7~`AgEx0zU+fOEQ7!)hAYqhkcq)?e96ez zIPQ>lM-wsupG^8)5nf#MB?mHE1Z^yMtLsbZI2rpM$F4_+C zvB;tzTSG+oCofiwwbuA>TA0-~rI@PqX#Jh~d2MeIqN7o_Qx{wGGG+oY9 zg`qlhl=mkpwWcwY2{mMy8A?h8zfbbF5hN|rA~lpG@U~|W#CVb<%Wjft)nAIfB=miplRcRj zFuZ!}k4WUlfeTtgwV&wi$4BbDR{M!;yzO8Q8!XjVO9C}sjIKEN#UPR^Hf)uqgEXNJ zqf17E$rz}@@12NUo$c*txG{lO+?0tcZ(SWQST`fZL$^OFm!<6lfdQgi80i@-3{n`s zYE^mG3us@tmas_e6a|pQ;3#y)(LXBhfPcb}BMC31&obY~N&c>Km{LH$=vE!!#kj!{K+#%?-@JI+#rwj&X< zI)Jb==NF?nv!yxnmA)Gn(n9??v=YW4ZniiXP(19gMu8EMVOB;4N1v`=d$r~V$(qq# z+3fy5w728%SKC`F)l)Z3wvHeR%|M{~^ZL)X8&!9!3IqWZ&AO(b0qv_#tUrOCU(-M7 zr9FfBozcUqz(L8fFf&Vkd{g7ID06(Y=JAZQ7LiL2q}Oa>1EsT*qcm5>X0D7#rMxk( z#WIi`y&5l%_3Fn?uV<%6NsA0r^yL_?Iq#;G5C8~GLr6`GrriQu@z;yVqBZ17VSjk@ zmAA3Yt18r*g^bfBia#Pydl}()Ce)}WL7={&;QciKTYQlNutgw5i=q#pP@+QdH?1m! z5>TB~q|oVzwSajbu)8uNH}oBRqBG!={Mv5|efUYCE8dyJ_Y}UV@eq>}xcK?wR?LaU9J`xOuD*dANFw&Ka_YG!HT+NANO6wjwgI#h_+nh zW~kgOVr_`fK|Wk~}ZRFYhZF{gX(VBnDY#_~QjT9<^t4Iv2(Aai- z6u*-D&15T8@9e7zjdlx-Fl?TJw}y}B`(wAc>KAFxVu zHX+`UF3Wt2^+14fGy$@E|0#3_6)Nep)+90(wyc;wX)EQvZHx%ya^%V}w4IB;Z*z5K zRp>7Z$&<~&szbc!M>`s|rr*(L9rxZmw5C!LVA@W3qos`G8g|toMVo~%@AZT?&a}oz zKo#nB^%nr4?4U=Xu@Giw0UqMSCxst~IJ_T;#od^N754SiB=WKVBO;znY-Gd7$7qpRe20&Z4t7wH^{0cN@%9wHNP1ykq`v}&bZ1u%73zd* zDD$vSd*wCs++#&9Sm|rK*}k8zmKP3}+k7!!_5j(|%9_@DKvp}JF|)^4&YsL!=@fS( zs|ZV+9$x1no=dlSLLXLZue@K)wr}Nn0dP4R!wzBowWdu1=U5e#beCcpMcCP&-tI&0 zkwI7*xEhnj%g{s|(Q9Hp09wWEJV$!_2Qv0aU_Y)(C`|Dz`&mYlLp9Y36YF!;7A(6a zPr7Od1c2UzkDSGm)k>}~lPg)Ea{GmOknKWCVu`ljf>jtRmi{+Dmk`3hq7fo>D{kd{ zY0c}25D%TThDwN7{L2>n7BcPLjuZvK_AmZ|v~;6&9>W{Im+yMM8F%Xp0+i<)5Zm^W z@s(`Q-hL0Ugn%(m@X*3!g&6w+ejI+|6#qA^R2_&uUFxBWqAd%{(usk;VD%L9HLGqM z#5`-+?^S?0*ozH5i~0@okVI#5!`x+DyVn zc*tKJ-en%+Nzm`*n?KWWFl7F{^a;MK&k>d~U4w<%nnHD7EPA6T%ilTJy8QyMdXKAj zJI+PO^fakuVdM6N-w2Qp`jXo)xqKp!w+M+92_{4x=$bA7tt=r=eBRPGUx3XnNel<1b%fj7>;VY&R# z={Uc+C67F-7g4R>+--0KbDQ;CKAiFi1rU@0s!$Z^cpvjAr#PE&y+cOaN$pj?ELwml)rN1cj zS6}1icfzfq(Et>C_?m28U3l$;$Io=|+et4hpA#OTijTCW5S9DQUV8*j`rS-Cc9+sJ z8WY~&dBU9-K`k<0C^%Qr(b6)8W>*>O_f#vwcG`Xygmx-mWRne=ANozYLDIxTgK$6R z0|x*1%D(lrm0c*8blxFzw&maCzwm4GUje6VU#jxUXwXG1(oWN4fV9Z>z(GA4QUm8# zHglp#7I|2L)!?E|`VJrA;~_2b9vu?P?AyQy>tmr&JE2V({7yeq%$OqDy?+Ksn1BMu z3NouLvH-l9DQf-dLrQ9)q<_=D=PBc>gYke2h7eZxffZ^n8wKvkuI8n>`Vepa+Ui7C zr$gSUJOvBz_zkY4B8@ciHkpUFAab;iK|+)3W7sL*?F_06zWt;CHW@D=6TYQIf}q@l z%e2T&o|$-QFCq0;I{5_3R$^74kZd>Ztlv{eHd4mzE^1H1_iM9m`fAqC*y7n@|NFHW zc6>F%P{}Za3>jmlE9Y5^SAqmMW5#4RcMHRDo3#bC3ws9}p;Z6BwmOloozk`UrEC91 zPN)xO>+ol%Ma1n{*s7S2uPtB0tHd|mDe-Ig!CO9hE!{G@(Saf%{W%C9b2r9( zdbe&4RO6u(g_7ezsSw1ANTnvKq8WCt8c@Lzr+9fwAdYCcsZzG7G!h@0myDwUD(;1T z`9r>BJZr3qf1rPSX#!~~Rb>D1RNdb}{VHw_85w*bh(q@Qpn7&os>fGB0rlQah7DC5 zSuY9}5X}^W%LFC2>&*m;D&b z5VH}D6h8XUN3jQq`cg`s0sOMnjq5(mci66HAd{U<)M)=nhCh{Fx0z%V&c}KY zNMT%hb(7?|ivFYwHFB8j}{ZtxYASa9J z8wnJ!|C1PydG+}uhOM#mJz&?FlMAf45yvlhyZdUZ@SR`rY;qac< z@LMd;fp`khmS0^2rRM(7Kk}$`-($Es`reCr@k8C`sV{8xP()petBr$PZanF=Iz~t{ zx?)%NO^IDs(ta%0crajcW00>2me5MlizqtX;`OY7YoqBP@{)zW-3ny1UPdmAwhtKC{{E-cd9_vh-`KYS0Agb$C@%R2)Y zI+T?OeuK-xFjiA{)0+&A9=*B=ji<3C6tGKyVUB8aormmpnx5&6j1Bwno&=cN-rD2bEz zKgaG@-Jr!jklSOORtnfrPU)ya4Xa&bGagY}t~NJ`wwsn!6~kFLJ}=PW!>OV2ywtwe zgIbn9f0OJL10b{q$G0fXkaa85sqj|y>)u3R>$Q8oCrj0>jF1#WIaxmQ2(MG+wY)=5aZ&`Ka{$;~hFLDHR;0+R@a1Fu2wvFrvVJ)7HN8uyGGq-y`$B?EQ0lmK z!8cO9t&aI}vmk_a0kL&047n1>k|p;f(`jNa6GZ!Un?0B{O60YPnPorD`pUO2`iMeh zbu|A6CNk|5)E)x*Mjb34)setxL3hFQgt#M(GdDf{Z*WFXBr*J$?SKTcb1#-WsEBII zzYo|LpyE*~SbzR#vanwc&OTuTaFd(s=|8lECPg!K3%wS?%Qe_o=XU$^cXQpdysU~3kFfOIrla*|%e(imc3o#VDfu6t zD8IZ@3M17Fp3_7eT}BOzO8t1Bu(@iTT4Ys$jOMp>oH%B2zzRgJmwUnlUJE7dN7 zXQ06qzVZ&dz%Ue!(b4aL6~P=|NM&2=2UC#sF{P-0WVacUxxgQ4y#W|g+HC#hk$fY+ z!U+JQ5!H(*U^W!gc+jW)W8Sh7J^a~7-^KGv$5Z-LJ$%ruhu$yf-#`!&&#nL*eohgjPOd9XQH!@gtNLwZ63yEfCYb%TS z5|?C)R7IeS|02!C4y!l;9l%F{)&q(`uMbIS9>F#{re>=zU8Jl?WX;kdlbN`X z$F5dk50R54mMRKb%6}OIK<2Of$$I|Cqw*ZR0rjB7EVk#vKxbgL+~XxV#D$+B7%l`% z@7-;Wpba8V@|0tTNHw#i%-$W$m#!dX~K6 z(|Z~v%V0Kr!GOSUE)~+Sv|&hUKCZf$RWLC-`XQ4{U-2VW5g+C3?`dmth^(m;pBx-& z0QLe~5W$);n2H$|!3giu3LBQL=N>NjFd>jnLm9YJ7o~V!^l(EFIw#ElM|*yTlG_;Z zlH~q~%QPJ)emGqK9-Zjb8L^ta;D?G9gwa}1D^7DEWWlBOzDiSEoXU#L1=J&Bez44L z5KTzb?Kd&$Vbw1ZUA^YBpacZWZf8<xIhT zLUu?7G}OYPxNtj!bWAYcC(MMy(=RRcaZtP`LBoaWy6meI=D~qEO;nKY%;IuXD6$4! zgQ0!-F_|ukkuBst#Ej|`aRQ2iz07yK_0Af;HLkS)gmwUy0@mm@)~f%Hz4w5M>iYi0 z@66mgGr;sd1L)X61$)7Ifs29yR;)22RZs+kK{T;o7YWfA6ODcojj3vEX=;oSY*?bv z5Mz%u3S#dCo%cES&QSa&-|u?A|62d|)_S>c=Ja#+*{APw_C9hT=_px45<-2vJ9o<`%sHqV zP8^M{+B$b|#b`KGw|`)O@7EVeUlNAVlNkIkhN80xL#3K~f*=sXQ2rC~A@7VqU}I_d zQ7jxuFT^9@eBZoV9*e;Y*E83K&Uz7|o*l@;u-6SJHy>xtWMNnEf}kCjwD~&k1Z0w& zNHZ#bsRfS6(BsbGB^d#pQ0j$Y7=CiSL-YT{Ww?$oyNf0U&V&iG(n}aWNEe=l+t#EH z->+`z6~_pYFebX&3-W^8juu!TRE*&BCwMIph2k)rf9AeoImYY4e)95B3IJ3Ti8JDT zcnSs*dWLGEi|9Focu+nA<2w&Fxt75Jax#V=;iunW#iY%s=ZR1%n2wT(nB4v+HBD+< zfVn~t%l5)kZ$L=}A#?GSrJn6Y2yH;5#~bI=>e(leGr^l1i=@){QWA9X{e?&BCG{TpS}?(kWz;dOHw4Xy1$h3|`yF3WhXxH7w{Td!Y8C!7F93lRfA`@&ks!f7^pr zyp6jer~?aH|HoLSpw3@M4{+DYWdb9=jH!^-Dm34?D_SEsNJAD31art^u4EA6>FKxy zTir7DQ6WEsAQiG~i>ydRu<9mq1~)ruH<2?~E|Dhk_GTV4FG3(F3ixq%jc;ejQ8(Gh7B@#2?bCu zOeTSVbWw!$QRw5}LuXyp@JuZN=1E-;vC|b*_`$*aHr#{Ys zJabWb1LteEk{*Y9X~S@xACzg1?8GARW5-Az4X>KPDwH3|31zl3k%^Yt=2s$+$X3J) zRgt5+M&nxWcjZ>lRZ6Mmh`AMj62Yazb}tg{5Ax^Jb}(*092Ty_5L$g9GhsQYNvaUn z>zFw(yKqhSL@4eH62|gVhLp>n0*m53Pg*7L!hj>G@%81;AkR_ zg?L;7J43vif+_YCz`_LpvhXb+Wt(#|*RL`H_em1>M~d*Y;V=1bx+v!Wj7(zeAt$y_ zZ!tv_R740z%cM%s#LFT}aRY%b8G(tv9)TCr!Q>HD(9sR3$FX{R1${QE6w4wW*R`X$ z$1B1!gxk`&4J!MP``#)ORr?8Qg5FQZ58VHn%MR0&z*af6fke-hBY~kzd7c~olMd#jyFWQwrfhlle z1mrL9k^4PlEUk_|ijR*K92|M-8)-%4;-m+k*h`R{AT|W=R!LIalHc8-F#i(1yOaX0 zC)%RG8XdW+c;^*Y~?J_Yw7|;3jS|E?Z<00WQWW5n95IiY!jeJeQiZOxGEQw z`(fs*)%ba~GyoVnU&M!~7>8gayqo_F*9Y83lgZ|jweTMp|a4j3$S`dNKC2EqSX;d<5amH;Ng1>0EB3*y5|u*Z#%Od zk-;z$U2vH68#M>X&|1onOA%CvW?wk@;XhNfLI+3gMO^{oh zV^#xwMSvMF_oVz3h@3B zF2deEMI$URMahV8 z)9ld4cgSJxKGal8_3RnQo7^)#6H{;r%sXukxaq5S_=XNG%&Cef6i4BZ3UATggET}e zbqXFu1@fXJV(`o}Io$}W!aIT3CtL()(z%?{h{F0HW8}7sD(YPo6|yI%enjC=LbPyt zR~ooNITky)5NBIX16Fuv-v}+3iieXAMxzmai6IAfO5ec4Sy+Z%#B@eL6zIL+PoeR6 zcp;H^TS7+%78B;c0z7n%*Oji@@t9*IGCv)eSQ=Gin9UV}VW~K`O=J;(0}PD|`&5C# zudVd08Lx2Nv<@J*2q5UjEm1L@>ojwIj27w}Zy#VhDfCyhg4ntv$ih-^vY-P6o4Y!z z(=Q*n5$&tUIJ=N^U`)%GXOrew>}*Oz^c65aV|*_-S<39eN}3FAuf{KB*20H;mH*=B zAIKvuG`p5$0I+vymAAdUo%gBIqv){uA}^781e~8mc~Iyf{$3pM8W~w z*p;M!p7MR$3F#)@#V*~+qI@ZvM0e&fE8z%BERF>~CH{r}K}a2MITR^>gq=6M2~f-T ztp&Y;NrxM@7+9bizQ>(_2_#C9f)J!XpCv#&@^wfdBzbf!WWwN$xhS_jk_|?(!u-oG zZCquAOe4YDd5Z*J??zK8BX{QkUT%Ir&i7yb5D4(z?nsivoiGIFMMAO!<_0A5BIPA` z@(_y%T>P+RA4%j2ldt-`)y-c~a0FK%FJSDR_0ns4R}_Xr?8rnslHzw1gNt+OtnM@5 z0x~#gb&8|8gOLGofZRvqhJ}o0d@Q(2#2!#(*D&*A*eO!XX+|)F7d8tH;2Aeb`8q61 z(LRWT#k^VFTarWza^wYXDx6=HhJ!|iY0Uk)ryFD}zTAnTY(-e^3TcDaq9*wwW=TuH z8wfcdc*?WjD9P&y9w6Qy+1(Cs^5%ev7Na2(i|CaF7|%cRz{}%PSQt86&YCRunjQp9 z@EfDVL2@9XYX{)C`)vH8@TlAZAf&(t^67b$3w$0GS3%Mf>IaqYB?$CSKomX@!Fe^l zJ^bH=6AT~}7UA*tf?uK%PvUf2h#yg?n29Il4@QYV>pO%e<7bi$H=a|rhwKBt1Cd7f z#A)oBr6nl`d3UfJz)j74me`_}8}Ml0N6{g-a^kDo zCwytJC1RvL;|v4+5!3`C*3ZY&9`J@UxvT&NkSaXq5To9>J4UoWx+sc{5kU~)Eg7Cq%7|^SAZA5XYIwshKG4y&T&m^gjXvYSCOX;k$SOHU5N*V(E_g1h2EG97)%7Y zcMB$gL)62$#mf-@j&IiLkDm5{tH}k23(CM9F5FKld5$$sIe?CVWYl?qXj*ezx#o(4 zDEYDH&JK}+$XS6!8BbsJw1R!kiLgf&JS>+3rFeK59im3=tf%}! z#r}@%rI4gEdRF&&Sg?t6zd)D&9wwJDU^=?|GNHYa%|em!`#C(}J91f}VP?5is4*fo zb4~=73;cQ&YXB?YWZyJz_kEasxDWF+0eenyRKY&= z>>a2UEUSwmEz|t4Vhk^(XSmxaUfJ6{{Wh3{V~V0bpd%9_4B%U}a0SUu;fL+z~hy;TY4&@P*ZS>H1DXQ;dE#jPOd5YJn+TG+peyt;^lLJI~|bf@_IPL$&tsKX`V`TkK1GAYmP#fvq$I~iS~*$laE0Dnh}>CeEuOVs z#P3i3R(>~H--+^%fPK=pucE~2`C<$pZ61M3pge^fQ4tT~1kMQ%zWQ1UvasA8iuWEP zEm4V>liR-&nK;w{q%E%XJ||fBPaQrnUMw0LAj~8iT;b)*zR5*lJOTK zd8i?Ds~wS|i-uzvte6#1H~=Hh@G4x5+QnatDxUSkn=24c=lEv`xB|TTR~%SUcHMnb zh}_KyIg=v;pYapC0a+Aj1kVY16uTHVJP3UoBx)Qk;PTcU&B)zYVI#0Sv~a)^Wb%Z_ ze416^;|veo+5#}(auH63&@ca`1k%aBoY$eD=@7PMvM2w8T?>u9vs z(aII>@*rEBrQq&T$pt&I#+I1>s^?4h`h@S~XffbeA~eC>AhiT*J9O@aA`4y1&ErwdG;`nk`ke>}q#oGPm%bI71=b{+)>xxiDvz%j2=NCmz~ zHgwig2sw!KvmTgLg1-4{L8Kw~b3A=ra*+w0QQ4MkcyrB&7{67rW0>5H z*|c((8$YP}xwXfqNJt37BcLFZ%>H%0#;HSlg=GM?Ud1Bfl6&iZ9T9JC{&KS0Ps7w1 zWq`n?CkzgqiWUQI?7x>q7rjI&Qbb`S#wHRe?`%vUgz$tv2e%t}*?10m z%K@%H?!<_Jn}LDl#JzHmyS&wFK)z21`;*-3kx1wrO@A zW?=Hf7FM&1aE|8$s~=hRVUfv?*I2PmCetL||AB9{U(Ncb$T*cx?35=J8^Cw&2c;77 zp81%@&ebt@FLE^*I|*Xgp`S+1L~rZ1Uvk?=xa|pUUF_Doxb-l%ZhOU^?T)|8t$V^P zcH8^7_2q7Trd#*q@6kQ!G#JYU54!F5-1@WsqU+r04tyov4{m#cTVL$f8@lyh z-FmiL7rS*&I-YPIc*0)s*YS2wd5QcpwE2hp;;h)&64S)&#`$RDpiS8ci9P^g8p#0~ z$WeA)Vj~1qYeDRE9VL6EVdSx}y5pI04brNh(HThpTj$H5Dy8(Xa^8lUx_T({ybLi7U{TAof)gYL6_OKqj!s5G}2lpebL7^`=`MEPCH) zwDck*0l08t993`^1Xq|r6fU3k6-d>*z&~_$BJvN?j*&e8pX8>uBD)WeUFA~ucm?}Y zVxL!IFM*vGuEx_diu?gMNp+|CpJu=^o7kNy93Jw81vH9k0zYLJwi7}O&z$H6-|V9QKOPI6FrX-Uph zdk=eSd()=&)a0}=sZL^}lH#55_6FVUv2oGS#49t`nU(AGxYS@3#0>!)GVi2U988@#B*T@BvB5>CSk^WP4M4n?Ncr zGkaWec2JKTXS_2v$6@c@-QKS+)r$nS=OjCGv+ODHY3a#HlruFuIX=mrmXYR6i%(B` zBi@;onc?;%>jr!onfCF?<1@1-+mmv$(=x```8;2Vg0Ki=@7CQOkeim_?Cfwh59IL) zSBJd?0X?V(G3TVck?ar>uJucBAcw+T11cYCHq?Bmx1b18$k;50Qb6THfp|&Hhk6T& z5|fyJ|D_>sV2EfGRCNWV$LBa5S@GGZ&F-j90LSAi+vy<1;H}9SsQ(5eCf_j9Gjnp% zlXG$$LSPcNwId-ng~u;x22>U)9^X0ylP4h|s8Du3HG=iY0v?3q32uT>UGD5_Ir2dK z9Sq~qM)~YxB4Qjd{kRB6X#f5Zv77)QiCSG40_b01KP{7QKWUk$paf3?0y?vTdhjTk zjOv^0$jZ!to{>A=k)D>3oZ~=iw|BE6jL__ZdI&v(%60pvWspWUvD(I`my;Nuo}BH- z4W8_XPfW}mPl6x`xAR1gbKSa3kDr{J4G`V+N1%d(gS3C4JUqVZ#;I+iDFzY;WN2Sr zlsDyrHm1aQs>XgyOX(;*WuT0di850b%8Ki^zLX#3Pt~L9Q+BEWp0a2}HKv+SO{r#7 z02PR%{T5V9Du@cET2Za3HdI@x9o3%dKy{=#QJtv}steVP>Orwo7+y)}MMYA5sAwvd z>Q4=%22(?*VblofHR^S0G?hRlQ7L$Iax9fjWl&jEHsz%9s5hvoX#KOOxl{pK{z7Uo z^&Yj1T0wn8eN25yeL=0I)>E6Q@2G9m4yuIOOC6vNQ^%;|)G6v5b&>j$x=!7u9#T)K zmy|>#7b!(Lky+#?q8X`7?&a<6qfn~U8m(5RHyDgYlgVthSgkf+KmU65?F||>YTTqr z(`EsI&0Dk#3Jz}7x=q`5?K^br)H$R}*KXZ=^khTB!nufEy(6Rg^o@>=iS5^az`#L+ z5(qZQwk+#_mD4SMFwztuP47K!^ie-~$s!uRwAmR#=dLAC4k zmmp>cUyU~;LRGuoeo<|F>8dumo>Uv3*K+kF1-&NP^O`Jbr||NHC*m_0+{sm^S}Uc$ zGoGsPxL8FbrSg%lKfC+vg**3})XvwyaO*{lxuz6PYr@tfi&9iuh=8)c_-cw-jncZI zYBH-yt4;{u!To_+>G}RTGmmdw{fFn(5wAag;EDPC`F+49*lK{hQDc1mq6QH)K)$Ro z*3QL~Dv(^uSUW_uxyHZR>Hi-CXn3CQ*~=;q7*Ae4twwN74|r5#ta@3~Kwnl@;**+c zK|A#%=6YUjdRSuwB0U+qh-7NvtE%N%<4+#4aDPudjh@(Rg{V%Ux>`LkUe#+ws^xWU zQtRP46DBRoTJ{Y)ZSBP1UXG0s3;V|nj9f9Ma~JP*r*~+T%d&0SPg?Fadas{s>A&07 zqa_=+sJD01b;lPqw5<*9q@Ta4!I9oQ4f5>lqYAG}0|I{YZN?Vm>pC}Vmztg8KPsk~U);JbpN&Xh8=9O)%ne(79yP9`-PTStphbPoI@ZLl zYkV=gq28D>`$tXmlpeZRM_fqT*6m7?8?8K%IXpPC+miZUow;JvWoAu?iTlRYbW(Oe zbJ3oM$GolMhqds3>+|DHS}gD0v)+pEAWn2FslU9%a#1^5@3&)PHLm=Id)Ea9FeznQ zXwkWLZM9z>D>hpPE~wvlo$u#OTmBh7w9A@-Ikv9f^z1s~+peFFidr5JV011#*09;e zR%*?bhUeP^Z3)&k*dk3(+qZ-Sn=JXFj@l-n_NW}cd~^Qc0Et&lyJDU6{Lm&|IbCB| zW2@9oEl+!O>@f2ZJEGU&fIzb?q+>|dRwl6N=f~?cw9Q%O^tR7!rtfghmTix6)%Oa$ zE>?>sM)kET+7-K2wP-i2exvY|xK2OBbvBwayB-c|QrxL&uPIR}qJ{}m6Pgc8jmzCQ z&@s5f@cg6+$w7Vlz1gZ={(yC&5G~U?C8R@Oo2CtvlS86xqPRfs@C7j$BU)wW7{%Tx zuFuWVWPgo!Tz>K%TZqm(CFOWSLyKI4y74FZoXD2ay?2v_9qQjNj_B6AX;hxyA5FNR z{Dz`dJ`dOR(CT|Fj_cH;SCbY^mM47@w@TF0>$UlQto=Y-U$vJP>)M*986x##SeNyQ zsIy!RUuf6t?`I`Zr4aw*Rz_L2=Vs4c*i(&|pvQn_oC_u`@rebD(P8wang0;DsL1eKX=^~0<0~(TXjQ7w~2Gl zee%i(f`}kD^Pv#nmsQVPxA<83DPyj=%GL=fEUR+e5dv(Uci(mWBJbLNMwx5Z1tEY) z@P*}3jj`G-KYw4No99cmuU_@eiXO9q_MQ7`)7cNJ&WX5Ii;uqd#ktk4^ZBCp?z+x_ zqaG=2ExP{VkF%~)7zZSNcW={APY=RfG^6~*?|bje2{3yhPCDqR;L(*nkz#2=sU zKIOVV0*IcwjuW^1{6iwlQM@U?K(yI)K`_7Ydh-02qpo6jY*b#jU$X7#K7@+Wt~>Yf zH#fd;UC$Re9>4f)3m^0LhzHNggvweGv-`=9yLnfU<@WQ_XLxW9v^(S4^8=qpMDS0y z51e*gfkm_vCnvmP{`t?IdcY}~QVotsQ*HdI@m1FiA@F-O^(MOHj-Q|ZxVYMQC%@V# znv0oD$l`bp%v^%8)2QkIg2R9KJ!m;z`NPh$tL|)cO>6pn`I@a)Hn_IucMo20X6e^= z*1AsSi?XghE8Y2cB@+L9{FSP*6Rr(Nu360L@~^&q_%&Qb?aw~iSNilUj8ppTyuYR7 z**O?3y=R_TzV`n2B*6C(pQdYjN-YLNP%#(1m7NQqqHml9g~f~k7`O!id%wgsY%H?lGsa+>+|3>!n4E!a+IFTu5dm!@Ghu9Uq7zAFJ+*`Ae_=*-PdcBe@tfFeUE2B67+7?Yly zF~*r%H$qPGnDNOOPEUk7iKV2aBj>;Ls!lYAibdw}1Y&`l6HJ96Q$q2wgLafeFw4`m zJos>z2UH(|5{{>h1q23D6SF!CTXP`UP15L}oje{?Clm+dhoH=qAOJ+niJ7?>04zBv znCd5x%Hk6;vw=!Cok^(8zy2j;9zq8q+$6-nKj#XI$n8M9$RBYcp@@-aNQ*_m06^yCym^QpFH6H+K8B*jyTKnikXXXf!KzCsoP zd_3@cI8PYfMW7ows8nZmac~k=OK~~^{~GCt z5E~a$gU~@B2k``9)CNxp1RXg&d17)poJpm52(f?>{l_tAFiyn>IWPjHWmdz@j~Y4E zRz9A9Mn_%8>|{5^3`9dhm-XaHTEV}67Ma-^AZ-?CvNdhqnduZ_^zGQCNsCCjca*`e zL)Tt?8n+x4(YJj!$c*1nY_6}!Y0AEuMt^^bZ{# z-7l0Q@q~dMp)ylaKszVcu6C*>LfV6Pf;>-<^u(yHv{x#YB#IBzuAm;d=xo^_?vhk_ zhly?nAq@E)eNi}%Vz0W-rLGA2s>_1j`jVg@b%$HzwpXX%4wrSt9nNES>-m2Q?sm6+ z$DO_>{w8;N7u^0w-RZDrg?Pno-TsGQ&pIdQ)Ool4f}me;+db)e^tTq&{d+UE?jMcO zwDupr7^(FG5>A~@^2$fQ@(Hs-%`eEpb^dx%b^kn6f3(4g106VJQEWFI;I* zsR;8W6hG~G5cZ1RKU6rM9PQS#+EVeU)2Z6fXF) zoS^r2$Mfj5z+t@uma(vhno2@Ky#pqNcJKIMC`I7`zHV1S3op=N-kmIAjG<*%XgV9# zy<=S1iL|j{6qO&=`{{x(S-tnePK^6Ftnk8DVQt^oim-da@{C6j{%qK5ZORenLD>Fy zD!l#*Y4{fx72%cb_2KzTtl<=85BJGy8s7V9%ka^2+l9;ObqT+_lMO#Hu6KBDgV^xG z3xmV|_;O@;+cy%z2MtaO_wJMx-n3y}c%E@ucLcX0I($#J&ynYv@T~>wk?-d4wwJ#}-dn>DME;2Ui^FX{>;?>_ z;rlxt0vt!er~dRSVEH}#TL064=a2BMH!lLFKf~87sQ_Fz!*e3;0=9?Y$6ZeVUlsDA zxXi&~u45$4S-VR)Q#&~q*xZ}z*HFRD@l|o9Mh&Oe>bPX3f&0S=o@nzEKRu$^#ZtMO`3CQK`l9Z$6#)I&(>VWK5e;o;@Wfj<2!O^ zGCFhnrgY)v7k1<7ujs)QtYf)7KZbF?9O1YxF81R3K8)nHdiCXQ*NfpQ+xO$v_Z`5s zO&r8celw2CUow>IwP84SVE;%?c4ZXC$kE(pzXZE8trGynx$wsgPUp^eyfO&D&g1z(VeN&qdt*q3>|LvKDif z=D*AB|9A=a_=oqn%-`PUf^RM5I?6xbW;a|8e6HXg4*eHr%K4C+`u0a$;M$d(ZQm-c z-=&Ya{V!Jozn^k*I)BEM#(mC3=X}BG-}#dB-MEHJKD?H@Q@IZKUeA>VZs7D$8@Z2C zH*u-+H**ud{F>Xg{~NAn#kau!_Z;0~3l|o>mHTP@Hg4j=AGoobw{t7Xe&l42cA!3X za_@94<~F=u!bxZD;+B23n@c*dhfBM;m-|v%iu&2l9UF0g+dlmucka_eT*reybNg=} z=H4;>f_O(!U&pwP^MB>eY$)TtJN_HDuj)9bXnca3-}fXJl5-06cN#Z(aUZbqET=I1 z!R_gGp4*swf&1m{i(G@Pmr$RVIfu`mT;C2?xm3qBZfij~*Y(>9?)D$ox!=5Qpnh+1 z?ML6@))(I9hHbgSwY_|o>!H5SP44=D`*X}g)b}GUy5up}>(&!4%l8>~Ao4jkU}6;~ z`}75O^Vmy%jugg#{GQ4S2XSkGVka#(u(GTs?6>RMVLV`2<%K?Q8_W(KGYam>tmwCN z_~o$Ez2AU;K0E#AnQ))ON^j3&yTvSE&lSDJuKnh1mMK}pO13UW+$F4N?EC!qa{BlO z?0e1?Y)|GxwsihSh`)+mKkj3sv6?kC`V{GW#-9A%_uYcLwz5~LZS3je+gPtJen6hv z*$;dCh)aW;q<2P2PIgYX%XOBKUj`IA@ zTF?BBGM!+pKb%0hPO^`eoJ849v1i7eLitXyy@Mz#i6K1RgH37xr8PE-taX zaxVcNmsmri%fQKH_Vpu|ftM?6`@Ac_%@ua7|DV9mpX{-cKY^pG?3ToleJ+gt3wtXshEEq2wTTfp&ccHEn{f#=)o zj+eKA>pSd+`FDWtJ76ri3!L9&1M}|!?|0cNFYW^O_t@w+?g9Vz*wlyjPzU!}HuFB} z;XZrn+I`f;1GcN<0qWxcJNEbk)X76Ov(H1+%R@Hir-!JUhpeK_Bh=3$cGK!dsG~=0 zPyJ)m(_{9hnU7IdkJ+|&AEUmWuphtv1aM80EcJF7X z!)L51=Nanp8N2KBGt}jCc3$Xn)aP?{>=(~br_b5(iYnA=75jcx73#K%y;fF*`hCGB zb$o$3e!*&%y+A#`VDCJ6fx3RlN{7EheZORfY<-D3f5~1pxlr#ecB9jUx_7ZZ9dohm z`0sMhCWTO{{3KJIz&Uep8%pJ7Aqi*Fci^%TNM&|X-mnr~IQu&x+A-o4Hk zE9lfXLAPfJdVZRq7rWg(;r}jNO%DIrWdB-7chfdOAN{$Y+t&*Eo$myF(QHA#uwKwT z;r}k&f6leWH#aLMetZ^gRg7_f>eLp?Oi+Ak-D#*L2-gdRa|$&mXs zEEE~EBcY<9@}Xu!&4(f+jbf-hQ2U{Nh9Vyg#X@mVo^(9%<#4I{_rxWqYE-#ljl8y6 zBezu6Rt9YLYO6Ka4AxdM+})`CS2wkCL*3NY$S;7`vbO46N>Q~{-QC7p3+nDR-i)oi z*C6Klul%`Wb^ko~$7=SMHM>IW>S~;M@`}AVc8@&a#7(ComygH=2)DJHoos0xy`rKA zM+|gChYlJHl=C0xAgP&2WCudFx}lEPeva^dG5rTd3>p;GFP7ZD;{CDT5d5S24H^^; z&$^)~Dls!7C2dUbgk0SBa!%$iKau=jaYiz2TDJ~Pp(s%9JUdwu4z$WwtU*2EJuZKH zSq`xf%(K}=83bArMZJ&pza4vo{m_Lk9;7I2lXB1z_^$?m0eJ*_fn={-w=kd4hCe06IQ?5=<1I8*oa3;GR|dB!N